WorldWideScience

Sample records for feed processability assessment

  1. Simulation assessment of continuous simulating moving bed chromatography process with partial feed and new strategy with partial feed

    Directory of Open Access Journals (Sweden)

    H. Khan

    2009-09-01

    Full Text Available Partial Feed simulating moving bed (SMB has proved to be more efficient in binary separation performance (purity, recovery, productivity because of its two additional degrees of freedom, namely feed length and feed time, as compared to classical SMB process. The binary separation of dextran T6 and fructose with linear isotherm is modeled with Aspen Chromatography simulator in a four zone SMB with one column per zone for both normal-feed and Partial Feed. Increase in number of feed length and feed time in the cycle plays a very important role in the separation performance with Partial Feed. In addition, the effect of mode of operation (early or late introduction of increase in number of feed length in the cycle on product purity and recovery is also investigated. Furthermore, the binary separation system is designed with the safety margin method and the optimum operating parameters for simulation are calculated with triangle theory. Finally, a new strategy with Partial Feed is developed, showing improved separation performance relative to the basic four-zone SMB with regard to extract stream purity and recovery. The results of the proposed study can served as a useful summary of Partial Feed operation.

  2. Feeding differently processed soya bean. Part 2. An assessment of haematological responses in the chicken.

    Science.gov (United States)

    Aletor, V A; Egberongbe, O

    1992-01-01

    The use of differently processed soya bean as a major source of dietary protein was evaluated in a haematological study using broiler chickens in which groundnut cake (GNC), raw soya bean (RSB), roasted soya bean (RtSB), cooked soya bean (CSB) and soya bean oil cake (SBC) were fed on equi-protein basis. The results showed that: 1. Red blood cell (RBC) count and haemoglobin content of blood significantly (P less than 0.05) increased in chicks fed RSB relative to the other soya bean diets. Feeding differently processed soya bean significantly (P less than 0.05) influenced mean cell haemoglobin (MCH) and mean corpuscular volume (MCV) while the mean corpuscular haemoglobin concentration (MCHC) was not significantly influenced. 2. Both the total white blood cell (WBC) count and the monocytes were significantly (P less than 0.05) influenced by the dietary treatments. Chicks fed processed soya bean generally had higher number of monocytes. 3. Physical properties determined were specific gravity and erythrocyte sedimentation rate. The latter was significantly (P less than 0.05) lower in all the processed soya bean-fed chicks. 4. Minerals determined in blood were Na, K, Ca, Mg, Fe, Cu and P. Of all these, chicks fed RSB had significantly (P less than 0.01) lower levels of blood Mg and marked decrease in Ca.

  3. Thermalhydraulic assessment of the Pickering NGS 'B' feed and bleed system for the hot boiler chemical clean (Siemens Process)

    International Nuclear Information System (INIS)

    Lorencez, Carlos M.

    2000-01-01

    The Hot Boiler Chemical Clean (HBCC) process from Siemens, to be used in PNGS, requires that the Heat Transport System (HTS) temperature be maintained in the range 160 to 170 o C for several days. To achieve these thermalhydraulic condition, the core decay power and the pump power of the main circulating pumps in a 3-3 configuration are employed to warm up the HTS from approximately 38 o C to 170 o C. At this point, high Bleed bias is applied to the signal of the HTS pressure controller to provide high Feed and Bleed flows, which are used to control the HTS temperature by means of the Bleed Cooler. To address any concern posed by these infrequently used HTS thermalhydraulic conditions, a detailed thermalhydraulic model of the Feed and Bleed System, that also includes the Gland Supply, Gland Return and Purification systems, was developed for the TUF code to determine the suitability of the Feed and Bleed System to conduct the HBCC. The model was then used to estimate the parameters such as Feed and Bleed flows, valve openings, pressure and temperature distributions throughout the Feed and Bleed System required for the application of HBCC. (author)

  4. The BSE risk of processing meat and bone meal in nonruminant feed: a quantitative assessment for the Netherlands.

    Science.gov (United States)

    de Vos, Clazien J; Heres, Lourens

    2009-04-01

    The total ban on use of meat and bone meal (MBM) in livestock feed has been very successful in reducing bovine spongiform encephalopathy (BSE) spread, but also implies a waste of high-quality proteins resulting in economic and ecological loss. Now that the BSE epidemic is fading out, a partial lifting of the MBM ban might be considered. The objective of this study was to assess the BSE risk for the Netherlands if MBM derived from animals fit for human consumption, i.e., category 3 MBM, would be used in nonruminant feed. A stochastic simulation model was constructed that calculates (1) the probability that infectivity of undetected BSE-infected cows ends up with calves and (2) the quantity of infectivity (Q(inf)) consumed by calves in case of such an incident. Three pathways were considered via which infectivity can reach cattle: (1) cross-contamination in the feed mill, (2) cross-contamination on the primary farm, and (3) pasture contamination. Model calculations indicate that the overall probability that infectivity ends up with calves is 3.2%. In most such incidents the Q(inf) is extremely small (median = 6.5 x 10(-12) ID(50); mean = 1.8 x 10(-4) ID(50)), corresponding to an average probability of 1.3 x 10(-4) that an incident results in >or=1 new BSE infections. Cross-contamination in the feed mill is the most risky pathway. Combining model results with Dutch BSE prevalence estimates for the coming years, it can be concluded that the BSE risk of using category 3 MBM derived from Dutch cattle in nonruminant feed is very low.

  5. Scientific opinion: Assessment of a decontamination process for hydrocyanic acid in linseed intended for use in animal feed

    NARCIS (Netherlands)

    Knutsen, Helle Katrine; Alexander, Jan; Barregård, Lars; Bignami, Margherita; Brüschweiler, Beat; Ceccatelli, Sandra; Cottrill, Bruce; Dinovi, Michael; Edler, Lutz; Grasl-Kraupp, Bettina; Hoogenboom, L.A.P.; Nebbia, Carlo Stefano; Oswald, Isabelle P.; Petersen, Annette; Rose, Martin; Roudot, Alain-Claude; Schwerdtle, Tanja; Vleminckx, Christiane; Vollmer, Günter; Wallace, Heather; Lundebye, Anne-Katrine; Metzler, Manfred; Colombo, Paolo; Hogstrand, Christer

    2017-01-01

    Following a request from the European Commission, the EFSA Panel on Contaminants in the Food Chain (CONTAM) provided a scientific opinion on the assessment of a decontamination process for the enzymatic treatment and subsequent heating of linseed, in order to reduce the amount of hydrocyanic acid

  6. The BSE Risk of Processing Meat and Bone Meal in Nonruminant Feed: A Quantitative Assessment for the Netherlands

    NARCIS (Netherlands)

    Vos, de C.J.; Heres, L.

    2009-01-01

    The total ban on use of meat and bone meal (MBM) in livestock feed has been very successful in reducing bovine spongiform encephalopathy (BSE) spread, but also implies a waste of high-quality proteins resulting in economic and ecological loss. Now that the BSE epidemic is fading out, a partial

  7. Food and feed safety assessment

    NARCIS (Netherlands)

    Kuiper, H.A.; Paoletti, Claudia

    2015-01-01

    The general principles for safety and nutritional evaluation of foods and feed and the potential health risks associated with hazardous compounds are described as developed by the Food and Agriculture Organization (FAO) and the World Health Organization (WHO) and further elaborated in the

  8. Low Activity Waste Feed Process Control Strategy

    International Nuclear Information System (INIS)

    STAEHR, T.W.

    2000-01-01

    The primary purpose of this document is to describe the overall process control strategy for monitoring and controlling the functions associated with the Phase 1B high-level waste feed delivery. This document provides the basis for process monitoring and control functions and requirements needed throughput the double-shell tank system during Phase 1 high-level waste feed delivery. This document is intended to be used by (1) the developers of the future Process Control Plan and (2) the developers of the monitoring and control system

  9. Feed process studies: Research-Scale Melter

    Energy Technology Data Exchange (ETDEWEB)

    Whittington, K.F.; Seiler, D.K.; Luey, J.; Vienna, J.D.; Sliger, W.A.

    1996-09-01

    In support of a two-phase approach to privatizing the processing of hazardous and radioactive waste at Hanford, research-scale melter (RSM) experiments were conducted to determine feed processing characteristics of two potential privatization Phase 1 high-level waste glass formulations and to determine if increased Ag, Te, and noble metal amounts would have bad effects. Effects of feed compositions and process conditions were examined for processing rate, cold cap behavior, off-gas, and glass properties. The 2 glass formulations used were: NOM-2 with adjusted waste loading (all components except silica and soda) of 25 wt%, and NOM-3 (max waste loaded glass) with adjusted waste loading of 30 wt%. The 25 wt% figure is the minimum required in the privatization Request for Proposal. RSM operated for 19 days (5 runs). 1010 kg feed was processed, producing 362 kg glass. Parts of runs 2 and 3 were run at 10 to 30 degrees above the nominal temperature 1150 C, with the most significant processing rate increase in run 3. Processing observations led to the choice of NOM-3 for noble metal testing in runs 4 and 5. During noble metal testing, processing rates fell 50% from baseline. Destructive analysis showed that a layer of noble metals and noble metal oxides settled on the floor of the melter, leading to current ``channeling`` which allowed the top section to cool, reducing production rates.

  10. Feed process studies: Research-Scale Melter

    International Nuclear Information System (INIS)

    Whittington, K.F.; Seiler, D.K.; Luey, J.; Vienna, J.D.; Sliger, W.A.

    1996-09-01

    In support of a two-phase approach to privatizing the processing of hazardous and radioactive waste at Hanford, research-scale melter (RSM) experiments were conducted to determine feed processing characteristics of two potential privatization Phase 1 high-level waste glass formulations and to determine if increased Ag, Te, and noble metal amounts would have bad effects. Effects of feed compositions and process conditions were examined for processing rate, cold cap behavior, off-gas, and glass properties. The 2 glass formulations used were: NOM-2 with adjusted waste loading (all components except silica and soda) of 25 wt%, and NOM-3 (max waste loaded glass) with adjusted waste loading of 30 wt%. The 25 wt% figure is the minimum required in the privatization Request for Proposal. RSM operated for 19 days (5 runs). 1010 kg feed was processed, producing 362 kg glass. Parts of runs 2 and 3 were run at 10 to 30 degrees above the nominal temperature 1150 C, with the most significant processing rate increase in run 3. Processing observations led to the choice of NOM-3 for noble metal testing in runs 4 and 5. During noble metal testing, processing rates fell 50% from baseline. Destructive analysis showed that a layer of noble metals and noble metal oxides settled on the floor of the melter, leading to current ''channeling'' which allowed the top section to cool, reducing production rates

  11. Technological foundations of processing tomato pomace in feed additives

    Directory of Open Access Journals (Sweden)

    B. Yegorov

    2015-05-01

    Full Text Available Introduction. Search for new types of alternative raw material for the efficient development of poultry industry and problem of waste disposal of canning industry made it necessary to develop a method of processing tomato pomace in feed additives. Materials and methods. Sampling, preparation and testing were carried out by general and specific organ oleptic and physical-technological methods of assessment and analysis of the properties of raw materials and finished products. Results. Incorporation of tomato pomace in the feed additive reduces the cost of raw materials and expenses associated with moistening of the mixture before extrusion and incorporation of chalk feed will solve the problem of calcium imbalance of laying hens. It was found that extrusion process has improved the physical properties of feed additive and showed the possibility of its use as a feed component: moisture content decreased by 34.5 %, the angle of repose increased by 11.4 %, flowability decreased by 39.7 % and bulk density decreased by 32.3 %. Conclusions. The resulting feed additive will solve the problem of diversification of raw materials, waste, calcium imbalance of laying hens and reduce expenses on compound animal feedstuff production.

  12. Food and feed safety assessment: the importance of proper sampling.

    Science.gov (United States)

    Kuiper, Harry A; Paoletti, Claudia

    2015-01-01

    The general principles for safety and nutritional evaluation of foods and feed and the potential health risks associated with hazardous compounds are described as developed by the Food and Agriculture Organization (FAO) and the World Health Organization (WHO) and further elaborated in the European Union-funded project Safe Foods. We underline the crucial role of sampling in foods/feed safety assessment. High quality sampling should always be applied to ensure the use of adequate and representative samples as test materials for hazard identification, toxicological and nutritional characterization of identified hazards, as well as for estimating quantitative and reliable exposure levels of foods/feed or related compounds of concern for humans and animals. The importance of representative sampling is emphasized through examples of risk analyses in different areas of foods/feed production. The Theory of Sampling (TOS) is recognized as the only framework within which to ensure accuracy and precision of all sampling steps involved in the field-to-fork continuum, which is crucial to monitor foods and feed safety. Therefore, TOS must be integrated in the well-established FAO/WHO risk assessment approach in order to guarantee a transparent and correct frame for the risk assessment and decision making process.

  13. Feed Variability and Bulk Vitrification Glass Performance Assessment

    International Nuclear Information System (INIS)

    Mahoney, Lenna A.; Vienna, John D.

    2005-01-01

    The supplemental treatment (ST) bulk vitrification process will obtain its feed, consisting of low-activity waste (LAW), from more than one source. One purpose of this letter report is to describe the compositional variability of the feed to ST. The other is to support the M-62-08 decision by providing a preliminary assessment of the effectiveness of bulk vitrification (BV), the process that has been selected to perform supplemental treatment, in handling the ST feed envelope. Roughly nine-tenths of the ST LAW feed will come from the Waste Treatment Plant (WTP) pretreatment. This processed waste is expected to combine (1) a portion of the same LAW feed sent to the WTP melters and (2) a dilute stream that is the product of the condensate from the submerged-bed scrubber (SBS) and the drainage from the electrostatic precipitator (WESP), both of which are part of the LAW off-gas system. The manner in which the off-gas-product stream is concentrated to reduce its volume, and the way in which the excess LAW and off-gas product streams are combined, are part of the interface between WTP and ST and have not been determined. This letter report considers only one possible arrangement, in which half of the total LAW is added to the off-gas product stream, giving an estimated ST feed stream from WTP. (Total LAW equals that portion of LAW sent to the WTP LAW vitrification plant (WTP LAW) plus the LAW not currently treatable in the LAW vitrification plant due to capacity limitations (excess))

  14. Development of new processing technology for ruminant feed

    International Nuclear Information System (INIS)

    Mat Rasol Awang; Hassan Hamdani Mutaat; Zainun Said; Alias Saidali; Erwan Md Ariff

    2002-01-01

    The technology for production ruminant feed from agriculture by-product remains scare despite plentiful availability of feeding materials worldwide. Factors that prohibit the process technology development suggested that their peculiar physical make up, high cost of production and inferior product quality compared to established raw material, had consequently impeding the effort. In Malaysia, only two pilot plants exist; they demonstrate utilization of Oil Palm Frond (OPF) into feed. In the case of OPF in situ utilization as feed, farmers use chipper machine or shredder to process it. Other by-products have not been successfully exploited, except for Palm Kernel Cake (PKC) and Palm Oil Mill Effluent (POME) that already in commercial operation. In view of the by-product availability as feeding material in ruminant feeding system and availability of new chipper and shredder machines, the prospect of processing agriculture by-products into feed is expected to be a promising business venture. This paper describes the technology for production of new feed from oil palm Empty Fruit Bunch (EFB). It elaborates on Sterifeed Plant Operation based on plant capacity of 0.5 ton/day production. The operation aspects discuss raw materials handling and processing as well as transforming the products into marketable forms. In this process EFB is initially predigested by fungi in solid state fermentation process into feed materials; the product is ready to be fed in fresh form to animal. The operation exercise has established actual process flow, identified problems and process drawbacks. Based on this experience, availability of localized raw materials EFB at the palm oil mill and rapid development of processing machinery, it is very likely that a commercially viable feed processing plant can be established in the near future. In addition, establishing more data on product quality by further test and characterization of the new feed may contribute to success of the project. (Author)

  15. Effects of feed process variables on Hanford Vitrification Plant performance

    International Nuclear Information System (INIS)

    Farnsworth, R.K.; Peterson, M.E.; Wagner, R.N.

    1987-01-01

    As a result of nuclear defense activities, high-level liquid radioactive wastes have been generated at the Hanford Site for over 40 yr. The Hanford Waste Vitrification Plant (HWVP) is being proposed to immobilize these wastes in a waste form suitable for disposal in a geologic repository. Prior to vitrification, the waste will undergo several conditioning steps before being fed to the melter. The effect of certain process variables on the resultant waste slurry properties must be known to assure processability of the waste slurry during feed preparation. Of particular interest are the rheological properties, which include the yield stress and apparent viscosity. Identification of the rheological properties of the slurry is required to adequately design the process equipment used for feed preparation (agitators, mixing tanks, concentrators, etc.). Knowledge of the slurry rheological properties is also necessary to establish processing conditions and operational limits for maximum plant efficiency and reliability. A multivariable study was performed on simulated HWVP feed to identify the feed process variables that have a significant impact on rheology during processing. Two process variables were evaluated in this study: (a) the amount of formic acid added to the feed and (b) the degree of shear encountered by the feed during processing. The feed was physically and rheologically characterized at various stages during feed processing

  16. Digestibility of organic processed feed ingredients in laying hens

    OpenAIRE

    van Krimpen, M.M.; van Diepen, J.T.M; Reuvekamp, B.F.J.; van Harn, J.

    2011-01-01

    In two experiments, digestibility and nutritive value for laying hens of organically-grown feed raw materials was assessed. Digestibility and metabolisable energy content of the products differed considerably compared to those listed in the CVB Feedstuff Table. Laying hens, organic feed raw materials, digestibility, nutritive value

  17. 60 ASSESSMENT OF FEEDING BEHAVIOUR OF BABOONS ...

    African Journals Online (AJOL)

    results indicate high diversity and abundance of food items for baboons in the study area. A total of 16 food plants, ... Keywords: Feeding behavior, baboon, food items, nutritive value, Hong hills ..... Noy-Meir, I. (1973) Desert ecosystems:.

  18. Feed Basis for Processing Relatively Low Radioactivity Waste Tanks

    International Nuclear Information System (INIS)

    Pike, J.A.

    2002-01-01

    This paper presents the characterization of potential feed for processing relatively low radioactive waste tanks. The feed characterization is based on waste characterization data extracted from the waste characterization system. This data is compared to salt cake sample results from Tanks 37, 38 and 41

  19. Species identification of processed animal proteins (PAPs) in animal feed containing feed materials from animal origin.

    Science.gov (United States)

    Axmann, Sonja; Adler, Andreas; Brandstettner, Agnes Josephine; Spadinger, Gabriela; Weiss, Roland; Strnad, Irmengard

    2015-01-01

    Since June 2013 the total feed ban of processed animal proteins (PAPs) was partially lifted. Now it is possible to mix fish feed with PAPs from non-ruminants (pig and poultry). To guarantee that fish feed, which contains non-ruminant PAPs, is free of ruminant PAPs, it has to be analysed with a ruminant PCR assay to comply with the total ban of feeding PAPs from ruminants. However, PCR analysis cannot distinguish between ruminant DNA, which originates from proteins such as muscle and bones, and ruminant DNA, which comes from feed materials of animal origin such as milk products or fat. Thus, there is the risk of obtaining positive ruminant PCR signals based on these materials. The paper describes the development of the combination of two analysis methods, micro-dissection and PCR, to eliminate the problem of 'false-positive' PCR signals. With micro-dissection, single particles can be isolated and subsequently analysed with PCR.

  20. Fluid coking : a competitive option for heavy feed processing

    International Nuclear Information System (INIS)

    Hammond, D.G.; Feinberg, A.S.; McCaffrey, D.S.

    1997-01-01

    Fluid coking is a proven thermal conversion process for converting heavy hydrocarbon feeds to lighter products. Fluid coking was commercialized by Exxon over 40 years ago. A total of 13 units have been built with over 330 years of cumulative operating experience. Fluid coking can process many different feeds at once and is usually insensitive to feed contaminants such as sulfur, nitrogen and metals. New developments in coke utilization and flue gas desulfurization/departiculation have prompted new economic studies. Fluid coking is competitive and is the most attractive option compared to delayed coking, particularly for very heavy feed stocks such as deasphalter bottoms. Viewgraphs describe the fluid coking process, its advantages, utilization, and commercial viability. 7 tabs., 3 figs

  1. The design of control system of livestock feeding processing

    Science.gov (United States)

    Sihombing, Juna; Napitupulu, Humala L.; Hidayati, Juliza

    2018-03-01

    PT. XYZ is a company that produces animal feed. One type of animal feed produced is 105 ISA P. In carrying out its production process, PT. XYZ faces the problem of rejected feed amounts during 2014 to June 2015 due to the amount of animal feed that exceeds the standard feed quality of 13% of moisture content and 3% for ash content. Therefore, the researchers analyzed the relationship between factors affecting the quality and extent of damage by using regression and correlation and determine the optimum value of each processing process. Analysis results found that variables affecting product quality are mixing time, steam conditioning temperature and cooling time. The most dominant variable affecting the product moisture content is mixing time with the correlation coefficient of (0.7959) and the most dominant variable affecting the ash content of the product during the processing is mixing time with the correlation coefficient of (0.8541). The design of the proposed product processing control is to run the product processing process with mixing time 235 seconds, steam conditioning temperature 87 0C and cooling time 192 seconds. Product quality 105 ISA P obtained by using this design is with 12.16% moisture content and ash content of 2.59%.

  2. Assessment of heavy metals in chicken feeds available in Sokoto ...

    African Journals Online (AJOL)

    ADEYEYE

    2014-12-08

    Dec 8, 2014 ... through eggs and meats. Supplementation of some ... heavy metal contaminations of chicken meat, eggs and other products .... processing and mixing of ingredients to the feed. ... Additives and Contaminants, 22(2): 141-. 149.

  3. High-Level Waste (HLW) Feed Process Control Strategy

    International Nuclear Information System (INIS)

    STAEHR, T.W.

    2000-01-01

    The primary purpose of this document is to describe the overall process control strategy for monitoring and controlling the functions associated with the Phase 1B high-level waste feed delivery. This document provides the basis for process monitoring and control functions and requirements needed throughput the double-shell tank system during Phase 1 high-level waste feed delivery. This document is intended to be used by (1) the developers of the future Process Control Plan and (2) the developers of the monitoring and control system

  4. Technology advancement of the static feed water electrolysis process

    Science.gov (United States)

    Schubert, F. H.; Wynveen, R. A.

    1977-01-01

    A program to advance the technology of oxygen- and hydrogen-generating subsystems based on water electrolysis was studied. Major emphasis was placed on static feed water electrolysis, a concept characterized by low power consumption and high intrinsic reliability. The static feed based oxygen generation subsystem consists basically of three subassemblies: (1) a combined water electrolysis and product gas dehumidifier module; (2) a product gas pressure controller and; (3) a cyclically filled water feed tank. Development activities were completed at the subsystem as well as at the component level. An extensive test program including single cell, subsystem and integrated system testing was completed with the required test support accessories designed, fabricated, and assembled. Mini-product assurance activities were included throughout all phases of program activities. An extensive number of supporting technology studies were conducted to advance the technology base of the static feed water electrolysis process and to resolve problems.

  5. Safety and nutritional assessment of GM plants and derived food and feed: the role of animal feeding trials.

    Science.gov (United States)

    2008-03-01

    , broilers, lactating dairy cows, and fish, comparing the in vivo bioavailability of nutrients from a range of GM plants with their near isogenic counterpart and commercial varieties, showed that they were comparable with those for near isogenic non-GM lines and commercial varieties. In Section 3 toxicological in vivo, in silico, and in vitro test methods are discussed which may be applied for the safety and nutritional assessment of specific compounds present in food and feed or of whole food and feed derived from GM plants. Moreover the purpose, potential and limitations of the 90-day rodent feeding trial for the safety and nutritional testing of whole food and feed have been examined. Methods for single and repeated dose toxicity testing, reproductive and developmental toxicity testing and immunotoxicity testing, as described in OECD guideline tests for single well-defined chemicals are discussed and considered to be adequate for the safety testing of single substances including new products in GM food and feed. Various in silico and in vitro methods may contribute to the safety assessment of GM plant derived food and feed and components thereof, like (i) in silico searches for sequence homology and/or structural similarity of novel proteins or their degradation products to known toxic or allergenic proteins, (ii) simulated gastric and intestinal fluids in order to study the digestive stability of newly expressed proteins and in vitro systems for analysis of the stability of the novel protein under heat or other processing conditions, and (iii) in vitro genotoxicity test methods that screen for point mutations, chromosomal aberrations and DNA damage/repair. The current performance of the safety assessment of whole foods is mainly based on the protocols for low-molecular-weight chemicals such as pharmaceuticals, industrial chemicals, pesticides, food additives and contaminants. However without adaptation, these protocols have limitations for testing of whole food and feed

  6. Biomass of Spirulina maxima enriched by biosorption process as a new feed supplement for swine.

    Science.gov (United States)

    Saeid, A; Chojnacka, K; Korczyński, M; Korniewicz, D; Dobrzański, Z

    2013-04-01

    This paper deals with the new mineral feed additives with Cu produced in a biosorption process from a semi-technical scale. The natural biomass of edible microalga Spirulina sp. was enriched with Cu(II) and then used as a mineral supplement in feeding experiments on swine to assess its nutrition properties. A total of 24 piglets divided into two groups (control and experimental) were used to determine the bioavailability of a new generation of mineral feed additives based on Spirulina maxima . The control group was feed using traditional inorganic supplements of microelements, while the experimental group was fed with the feed containing the biomass of S. maxima enriched with Cu by biosorption. The apparent absorption was 30 % ( P  maxima -is a promising alternative to currently used inorganic salts as the source of nutritionally important microelements.

  7. Further assessment of scavenging feed resource base

    International Nuclear Information System (INIS)

    Sonaiya, E.B.; Dazogbo, J.S.; Olukosi, O.A.

    2002-01-01

    The scavenging feed resource base (SFRB) was estimated in four villages located in a rainforest ecozone in Nigeria. The average SFRB estimated for the villages was 110 kg dry weight/family flock/year. Productivity of the birds in the villages was low. A low survivability of chicks was detected indicating a lot of wastage of eggs that could have been used for human consumption. The SFRB was low in nutritive value with less than 2 g crude protein (CP) available to each bird daily. To more quantitatively describe the SFRB, the concept of using bird unit in determining what is available to each bird is suggested. This helped in evaluating at first glance the differential accessibility of each class of bird to the SFRB and assisted in strategic supplementation of the SFRB. The use of predictors of the SFRB could help in establishing prediction equation which would help in predicting the carrying capacity of the SFRB and in determining the optimum flock biomass more accurately. (author)

  8. EFFECT OF MELTER-FEED-MAKEUP ON VITRIFICATION PROCESS

    International Nuclear Information System (INIS)

    Kruger, A.A.; Hrma, P.R.; Schweiger, M.J.; Humrickhouse, C.J.; Moody, J.A.; Tate, R.M.; Tegrotenhuis, N.E.; Arrigoni, B.M.; Rodriguez, C.P.

    2009-01-01

    Increasing the rate of glass processing in the Hanford Tank Waste Treatment and Immobilization Plant (WTP) will allow shortening the life cycle of waste cleanup at the Hanford Site. While the WTP melters have approached the limit of increasing the rate of melting by enhancing the heat transfer rate from molten glass to the cold cap, a substantial improvement can still be achieved by accelerating the feed-to-glass conversion kinetics. This study investigates how the feed-to-glass conversion process responds to the feed makeup. By identifying the means of control of primary foam formation and silica grain dissolution, it provides data needed for a meaningful and economical design of large-scale experiments aimed at achieving faster melting

  9. Sensory Processing Difficulties in Toddlers With Nonorganic Failure-to-Thrive and Feeding Problems.

    Science.gov (United States)

    Yi, Sook-Hee; Joung, Yoo-Sook; Choe, Yon Ho; Kim, Eun-Hye; Kwon, Jeong-Yi

    2015-06-01

    Failure-to-thrive is defined as an abnormally low weight and/or height for age. The term "nonorganic failure-to-thrive" (NOFT) has been used to describe "failure-to-thrive" without an obvious cause underlying the growth failure. The purpose of the present study was to compare sensory processing abilities between toddlers with NOFT and feeding problems and age-matched controls. Toddlers with NOFT and feeding problems (N = 16) were recruited from the pediatric feeding clinic in a tertiary university hospital, and age-matched controls (N = 16) were recruited from community volunteers. They were evaluated for sensory processing ability using an Infant/Toddler Sensory Profile (ITSP), and for development of cognition, motor skills, and language using the Bayley Scales of Infant Development II and Sequenced Language Scale for Infants. Behavior at mealtime was evaluated using the Behavioral Pediatrics Feeding Assessment Scale. In the NOFT with feeding problems group, atypical performances were more frequently observed in 3 of 5 ITSP section items (tactile, vestibular, and oral) compared with those in the control group. Significant delayed development of cognition, motor skills, and language was observed in the NOFT with feeding problems group compared with that in the control group. In addition, children who showed 1 or more atypical performances in ITSP had delayed development in cognition, motor skills, and language. Sensory processing problems were more commonly observed in toddlers with feeding problems and growth deficiency. The present study could provide a preliminary evidence for a possible impact of the sensory processing problems on the feeding difficulties in toddlers with NOFT. Future large studies should be conducted to clarify the relation between sensory processing difficulties and feeding problems in toddlers.

  10. Landfill mining from a deposit of the chlorine/organochlorine industry as source of dioxin contamination of animal feed and assessment of the responsible processes.

    Science.gov (United States)

    Torres, João Paulo Machado; Leite, Claudio; Krauss, Thomas; Weber, Roland

    2013-04-01

    In 1997, the Polychlorinated dibenzo-para-dioxin (PCDD)/Polychlorinated dibenzofuran (PCDF) concentrations in dairy products in Germany and other European countries increased. The PCDD/PCDF source was contaminated lime used in Brazilian citrus pulp pellets. The contaminated lime was mined from an industrial dump site. However, the detailed origin of the PCDD/PCDFs in the lime was not revealed. This paper investigates the contamination origin and describes the link between lime milk from the dumpsite of a chlorine/organochlorine industry and the contaminated lime. The contaminated lime stem from mining at the corporate landfill of Solvay Indupa in Sao Paulo. The landfill was used for 40 years for deposition of production residues and closed in 1996. The factory operated/operates at least two processes with potentially high PCDD/PCDFs releases namely the oxychlorination process for production of ethylene dichloride (EDC) and the chlor-alkali process. The main landfilled waste was lime milk (1.4 million tons) from the vinyl chloride monomer production (via the acetylene process) along with residues from other processes. The PCDD/PCDF fingerprint revealed that most samples from the chemical landfill showed an EDC PCDD/PCDF pattern with a characteristic octachlorodibenzofuran dominance. The PCDD/PCDF pattern of a Rio Grande sediment samples downstream the facility showed a chlor-alkali pattern with a minor impact of the EDC pattern. The case highlights that PCDD/PCDF- and persistent organic pollutants-contaminated sites need to be identified in a comprehensive manner as required by the Stockholm Convention (article 6) and controlled for their impact on the environment and human health. Landfill mining and reuse of materials from contaminated deposits should be prohibited.

  11. Safety and nutritional assessment of GM plants and derived food and feed: The role of animal feeding trials

    NARCIS (Netherlands)

    Haver, van E.; Alink, G.M.; Cockburn, A.; Kuiper, H.A.; Peijnenburg, A.A.C.M.

    2008-01-01

    In this report the various elements of the safety and nutritional assessment procedure for genetically modified (GM) plant derived food and feed are discussed, in particular the potential and limitations of animal feeding trials for the safety and nutritional testing of whole GM food and feed. The

  12. The development of a new breast feeding assessment tool and the relationship with breast feeding self-efficacy.

    Science.gov (United States)

    Ingram, Jenny; Johnson, Debbie; Copeland, Marion; Churchill, Cathy; Taylor, Hazel

    2015-01-01

    to develop a breast feeding assessment tool to facilitate improved targeting of optimum positioning and attachment advice and to describe the changes seen following the release of a tongue-tie. development and validation of the Bristol Breastfeeding Assessment Tool (BBAT) and correlation with breast feeding self-efficacy. maternity hospital in South West England. 218 breast feeds (160 mother-infant dyads); seven midwife assessors. the tool has more explanation than other tools to remind those supporting breast-feeding women about the components of an efficient breast feed. There was good internal reliability for the final 4-item BBAT (Cronbach's alpha=0.668) and the midwives who used it showed a high correlation in the consistency of its use (ICC=0.782). Midwives were able to score a breast feed consistently using the BBAT and felt that it helped them with advice to mothers about improving positioning and attachment to make breast feeding less painful, particularly with a tongue-tied infant. The tool showed strong correlation with breast feeding self-efficacy, indicating that more efficient breast feeding technique is associated with increased confidence in breast feeding an infant. the BBAT is a concise breast feeding assessment tool facilitating accurate, rapid breast feeding appraisal, and targeting breast feeding advice to mothers acquiring early breast feeding skills or for those experiencing problems with an older infant. Accurate assessment is essential to ensure enhanced breast feeding efficiency and increased maternal self-confidence. the BBAT could be used both clinically and in research to target advice to improve breast feeding efficacy. Further research is needed to establish its wider usefulness. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

  13. Process gas generator feeding internal combustion piston engines

    Energy Technology Data Exchange (ETDEWEB)

    Iwantscheff, G; Kostka, H; Henkel, H J

    1978-10-26

    The invention relates to a process gas generator feeding gaseous fuel to internal combustion piston engines. The cylinder linings of the internal combustion engine are enclosed by the catalytic reaction chamber of the process gas generator which contains perforated sintered nozzle bricks as carriers of the catalysts needed for the conversion. The reaction chamber is surrounded by the exhaust gas chamber around which a tube coil is ound which feeds the fuel charge to the reaction chamber after evaporation and mixing with exhaust gas and air. The fuel which may be used for this purpose, e.g., is low-octane gasoline or diesel fuel. In the reaction chamber the fuel is catalytically converted at temperatures above 200/sup 0/C, e.g., into low-molecular paraffins, carbon monoxide and hydrogen. Operation of the internal combustion engine with a process gas generator greatly reduces the pollutant content of the exhaust gases.

  14. Fermented liquid feed - Feed processing has a big impact on microbial degradation of free lysine during fermentation

    DEFF Research Database (Denmark)

    Canibe, Nuria; Jensen, Bent Borg

    2010-01-01

    In order to investigate the influence of feed processing on the microbial degradation of free lysine during fermentation of liquid feed, a study at laboratory scale was carried out. Based on a standard Danish grower diet with extra free amino acids added, two treatments were prepared: treatment 1...... a few hours of fermentation, the levels in both treatments became similar. The concentration of acetic acid was higher in the mixture containing the mash feed than in that containing the pelleted feed. The disappearance of free lysine was much higher when mash feed was fermented than when the same...

  15. Process of performance assessment

    International Nuclear Information System (INIS)

    King, C.M.; Halford, D.K.

    1987-01-01

    Performance assessment is the process used to evaluate the environmental consequences of disposal of radioactive waste in the biosphere. An introductory review of the subject is presented. Emphasis is placed on the process of performance assessment from the standpoint of defining the process. Performance assessment, from evolving experience at DOE sites, has short-term and long-term subprograms, the components of which are discussed. The role of mathematical modeling in performance assessment is addressed including the pros and cons of current approaches. Finally, the system/site/technology issues as the focal point of this symposium are reviewed

  16. A focused ethnographic assessment of Middle Eastern mothers' infant feeding practices in Canada.

    Science.gov (United States)

    Jessri, Mahsa; Farmer, Anna P; Olson, Karin

    2015-10-01

    The aim of this study was to examine the barriers to following complementary feeding guidelines among Middle Eastern mothers and the cultural considerations of practitioners from an emic perspective. This is a two-phase focused ethnographic assessment of infant feeding among 22 Middle Eastern mothers in Western Canada who had healthy infants aged foods was whether or not foods were Halal, while food allergens were not causes for concern. Vitamin D supplements were not fed to 18/22 of infants, and mashed dates (Halawi), rice pudding (Muhallabia/Ferni) and sugared water/tea were the first complementary foods commonly consumed. Through constant comparison of qualitative data, three layers of influence emerged, which described mothers' process of infant feeding: socio-cultural, health care system and personal factors. Culture was an umbrella theme influencing all aspects of infant feeding decisions. Mothers cited health care professionals' lack of cultural considerations and lack of relevance and practicality of infant feeding guidelines as the main reasons for ignoring infant feeding recommendations. Early introduction of pre-lacteal feeds and inappropriate types of foods fed to infants among immigrant/refugee Middle Eastern mothers in Canada is cause of concern. Involving trained language interpreters in health teams and educating health care staff on cultural competency may potentially increase maternal trust in the health care system and eventually lead to increased awareness of and adherence to best practices with infant feeding recommendations. © 2013 John Wiley & Sons Ltd.

  17. Feed type based expert systems in mineral processing plants

    International Nuclear Information System (INIS)

    Jamsa-Jounela, S.-L.; Laine, S.; Laurila, H.

    1999-01-01

    Artificial Intelligence includes excellent tools for the control and supervision of industrial processes. Several thousand industrial applications have been reported worldwide. Recently, the designers of the AI systems have begun to hybridize the intelligent techniques, expert systems, fuzzy logic and neural networks, to enhance the capability of the AI systems. Expert systems have proved to be ideal candidates especially for the control of mineral processes. As successful case projects, expert system based on on-line classification of the feed type is described in this paper. The essential feature of this expert system is the classification of different feed types and their distinct control strategies at the plant. In addition to the classification, the expert system has a database containing information about how to handle the determined feed type. This self-learning database scans historical process data to suggest the best treatment for the ore type under processing. The system has been tested in two concentrators, the Outokumpu Finnmines Oy, Hitura mine and Outokumpu Chrome Oy, Kemi mine. (author)

  18. Natural Language Processing with Small Feed-Forward Networks

    OpenAIRE

    Botha, Jan A.; Pitler, Emily; Ma, Ji; Bakalov, Anton; Salcianu, Alex; Weiss, David; McDonald, Ryan; Petrov, Slav

    2017-01-01

    We show that small and shallow feed-forward neural networks can achieve near state-of-the-art results on a range of unstructured and structured language processing tasks while being considerably cheaper in memory and computational requirements than deep recurrent models. Motivated by resource-constrained environments like mobile phones, we showcase simple techniques for obtaining such small neural network models, and investigate different tradeoffs when deciding how to allocate a small memory...

  19. Process development work plan for waste feed delivery system

    International Nuclear Information System (INIS)

    Papp, I.G.

    1998-01-01

    This work plan defines the process used to develop project definition for Waste Feed Delivery (WFD). Project definition provides the direction for development of definitive design media required for the ultimate implementation of operational processing hardware and software. Outlines for the major deliverables are attached as appendices. The implementation of hardware and software will accommodate requirements for safe retrieval and delivery of waste currently stored in Hanford's underground storage tanks. Operations and maintenance ensure the availability of systems, structures, and components for current and future planned operations within the boundary of the Tank Waste Remediation System (TWRS) authorization basis

  20. Phase Equilibrium Studies of Savannah River Tanks and Feed Streams for the Salt Waste Processing Facility

    Energy Technology Data Exchange (ETDEWEB)

    Weber, C.F.

    2001-06-19

    A chemical equilibrium model is developed and used to evaluate supersaturation of tanks and proposed feed streams to the Salt Waste Processing Facility. The model uses Pitzer's model for activity coefficients and is validated by comparison with a variety of thermodynamic data. The model assesses the supersaturation of 13 tanks at the Savannah River Site (SRS), indicating that small amounts of gibbsite and or aluminosilicate may form. The model is also used to evaluate proposed feed streams to the Salt Waste Processing Facility for 13 years of operation. Results indicate that dilutions using 3-4 M NaOH (about 0.3-0.4 L caustic per kg feed solution) should avoid precipitation and reduce the Na{sup +} ion concentration to 5.6 M.

  1. Control of DWPF [Defense Waste Processing Facility] melter feed composition

    International Nuclear Information System (INIS)

    Edwards, R.E. Jr.; Brown, K.G.; Postles, R.L.

    1990-01-01

    The Defense Waste Processing Facility will be used to immobilize Savannah River Site high-level waste into a stable borosilicate glass for disposal in a geologic repository. Proper control of the melter feed composition in this facility is essential to the production of glass which meets product durability constraints dictated by repository regulations and facility processing constraints dictated by melter design. A technique has been developed which utilizes glass property models to determine acceptable processing regions based on the multiple constraints imposed on the glass product and to display these regions graphically. This system along with the batch simulation of the process is being used to form the basis for the statistical process control system for the facility. 13 refs., 3 figs., 1 tab

  2. Assessment of feeding value of vegetable-carried pineapple fruit ...

    African Journals Online (AJOL)

    This study compared the sun-drying characteristics of five blends each (w/w; 1:1, 1:1.5, 1:2, 1:2.5, 1:3) of wheat offal-carried pineapple waste (WO:PW) and brewers' dried grains-carried pineapple waste (BDG:PW), assessed the blends for their nutrient contents and the feeding value of the optimum blends with Red Sokoto ...

  3. Bio-processing of agro-byproducts to animal feed.

    Science.gov (United States)

    Ajila, C M; Brar, S K; Verma, M; Tyagi, R D; Godbout, S; Valéro, J R

    2012-12-01

    Agricultural and food-industry residues constitute a major proportion (almost 30%) of worldwide agricultural production. These wastes mainly comprise lignocellulosic materials, fruit and vegetable wastes, sugar-industry wastes as well as animal and fisheries refuse and byproducts. Agro-residues are rich in many bioactive and nutraceutical compounds, such as polyphenolics, carotenoids and dietary fiber among others. Agro residues are a major valuable biomass and present potential solutions to problems of animal nutrition and the worldwide supply of protein and calories, if appropriate technologies can be used for their valorization by nutrient enrichment. Technologies available for protein enrichment of these wastes include solid substrate fermentation, ensiling, and high solid or slurry processes. Technologies to be developed for the reprocessing of these wastes need to take account of the peculiarities of individual wastes and the environment in which they are generated, reprocessed, and used. In particular, such technologies need to deliver products that are safe, not just for animal feed use, but also from the perspective of human feeding. This review focuses on the major current applications of solid-state fermentation in relation to the feed sector.

  4. Economic assessment of sterifeed process

    International Nuclear Information System (INIS)

    Mat Rasol Awang; Hassan Hamdani Mutaat

    2004-01-01

    The economics of a processing technology depends on its cost. Two types of costs commonly used in the estimation are a fixed cost and the other is variable cost. The cost structure that included in the fixed cost, mainly, the cost of land, building and machineries, and the variable cost covers raw materials, salary / wages, utilities, irradiation charge, other miscellaneous expenses and contingencies. The assessment were made by treating the economic data using discounted cash flow projection method to deduce the economic indicators: Net Present Value (NPV), Internal Rate of Return (IRR), Benefit to Cost (B/C) ratio, that would suggest the project feasibility, either feasible or otherwise. The NPV, IRR, B/C deduced from Sterifeed Process showed the economic of this technology was infeasible due high cost incurred in transportation, labour as well as the cost of machinery. This is accomplished by sensitivity test performed on these cost components. However, cost structure derived from Sterifeed Plant serves as a model cost structure for economic assessment in production of Sterifeed, a fermented ruminant feed, and to work further on the economic of the project. This paper discuss economic evaluation of Sterifeed process in different scenarios that carried out in the Sterifeed process operations and deduction were made to derive a model production unit for commercialisation. (Author)

  5. An alternative process to treat boiler feed water for reuse.

    Science.gov (United States)

    Guirgis, Adel; Ghosh, Jyoti P; Achari, Gopal; Langford, Cooper H; Banerjee, Daliya

    2012-09-01

    A bench-scale process to treat boiler feed water for reuse in steam generation was developed. Industrial water samples from a steam-assisted gravity drainage plant in northern Alberta, Canada, were obtained and samples characterized. The technology, which consists of coagulation-settling to remove oil/grease and particulates followed by an advanced oxidative treatment, led to clean water samples with negligible organic carbon. Coagulation followed by settling removed most particulates and some insoluble organics. The advanced oxidative treatment removed any remaining color in the samples, decreased the organic content to near-zero, and provided water ready for reuse.

  6. Assessment of aflatoxin B1 in livestock feed and feed ingredients by high-performance thin layer chromatography

    Directory of Open Access Journals (Sweden)

    Korrapati Kotinagu

    2015-12-01

    Full Text Available Aim: Detection of aflatoxin B1 in Livestock compound Feed and feed ingredients by high-performance thin layer chromatography (HPTLC. Materials and Methods: Chromatography was performed on HPTLC silica gel 60 F 254, aluminum sheets by CAMAG automatic TLC sampler 4, with mobile phase condition chloroform:acetone:water (28:4:0.06. Extraction of aflatoxin B1 from samples was done as per AOAC method and screening and quantification done by HPTLC Scanner 4 under wavelength 366 nm. Results: A total of 97 livestock feed (48 and feed ingredients (49 samples received from different livestock farms and farmers were analyzed for aflatoxin B1of which 29 samples were contaminated, constituting 30%. Out of 48 livestock compound feed samples, aflatoxin B1 could be detected in 16 samples representing 33%, whereas in livestock feed ingredients out of 49 samples, 13 found positive for aflatoxin B1 representing 24.5%. Conclusion: HPTLC assures good recovery, precision, and linearity in the quantitative determination of aflatoxin B1 extracted from Livestock compound feed and feed ingredients. As more number of feed and feed ingredients are contaminated with aflatoxin B1 which causes deleterious effects in both animal and human beings, so there is a need for identifying the source of contamination, executing control measures, enabling better risk assessment techniques, and providing economic benefits.

  7. Assessing Process and Product

    DEFF Research Database (Denmark)

    Bennedsen, Jens; Caspersen, Michael E.

    2006-01-01

    The final assessment of a course must reflect its goals, and contents. An important goal of our introductory programming course is that the students learn a systematic approach for the development of computer programs. Having the programming process as learning objective naturally raises the ques...

  8. Validity of assessing child feeding with virtual reality.

    Science.gov (United States)

    Persky, Susan; Goldring, Megan R; Turner, Sara A; Cohen, Rachel W; Kistler, William D

    2018-04-01

    Assessment of parents' child feeding behavior is challenging, and there is need for additional methodological approaches. Virtual reality technology allows for the creation of behavioral measures, and its implementation overcomes several limitations of existing methods. This report evaluates the validity and usability of the Virtual Reality (VR) Buffet among a sample of 52 parents of children aged 3-7. Participants served a meal of pasta and apple juice in both a virtual setting and real-world setting (counterbalanced and separated by a distractor task). They then created another meal for their child, this time choosing from the full set of food options in the VR Buffet. Finally, participants completed a food estimation task followed by a questionnaire, which assessed their perceptions of the VR Buffet. Results revealed that the amount of virtual pasta served by parents correlated significantly with the amount of real pasta they served, r s  = 0.613, p < .0001, as did served amounts of virtual and real apple juice, r s  = 0.822, p < .0001. Furthermore, parents' perception of the calorie content of chosen foods was significantly correlated with observed calorie content (r s  = 0.438, p = .002), and parents agreed that they would feed the meal they created to their child (M = 4.43, SD = 0.82 on a 1-5 scale). The data presented here demonstrate that parent behavior in the VR Buffet is highly related to real-world behavior, and that the tool is well-rated by parents. Given the data presented and the potential benefits of the abundant behavioral data the VR Buffet can provide, we conclude that it is a valid and needed addition to the array of tools for assessing feeding behavior. Published by Elsevier Ltd.

  9. Stable isotope-labelled feed nutrients to assess nutrient-specific feed passage kinetics in ruminants

    NARCIS (Netherlands)

    Warner, D.; Dijkstra, J.; Hendriks, W.H.; Pellikaan, W.F.

    2014-01-01

    Knowledge of digesta passage kinetics in ruminants is essential to predict nutrient supply to the animal in relation to optimal animal performance, environmental pollution and animal health. Fractional passage rates (FPR) of feed are widely used in modern feed evaluation systems and mechanistic

  10. Process and device for feeding a cutter of nuclear fuel

    International Nuclear Information System (INIS)

    Chaze, Gilbert; Cherel, Guy; Guilloteau, Rene; Tucoulat, Daniel.

    1975-01-01

    A process is described for feeding the cutter of a nuclear fuel tube bundle by means of a mobile magazine. The first operation consists in grabbing the bundle in the storage pool by means of handling gear incorporated in the cutter magazine and introducing the bundle right into the magazine. The second operation is to locate the position of the bundle and to do so a mobile reference plate, of which the relative positions in relation to the magazine and to the cutting section in the cutter are known, is placed near the end of the magazine that will enter into contact with the cutter, the bundle is then moved until its end enters into contact with the reference plate. The next operation consists in adjusting the position of the bundle by moving it out of the magazine by a given length as from the position of the bundle when it was in contact with the reference plate so as to separate the foot end of the bundle by a cut made right next to this foot end. In several successive operations to adjust the cutting positions, the bundle is fed forward in the cutter by a length equal to a tube section. All these operations are carried out without the bundle being separated from the single handling gear built into the magazine [fr

  11. Proximate analyses - Utilization of Marine Process Waste for Aquaculture Feeds

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Limited amounts of forage fish are available as an ingredient in feeds for the expanding aquaculture industry. Work is being conducted on a variety of underutilized...

  12. Breast-feeding and human immunodeficiency virus infection: assessment of knowledge among clinicians in Kenya.

    Science.gov (United States)

    Murila, Florence; Obimbo, Moses M; Musoke, Rachel; Tsikhutsu, Isaac; Migiro, Santau; Ogeng'o, Julius

    2015-02-01

    In Kenya, human immunodeficiency virus (HIV) prevalence ranks among the highest in the world. Approximately 60 000 infections yearly are attributed to vertical transmission including the process of labour and breast-feeding. The vast of the population affected is in the developing world. Clinical officers and nurses play an important role in provision of primary health care to antenatal and postnatal mothers. There are a few studies that have explored the clinicians' knowledge on breast-feeding in the face of HIV and in relation to vertical transmission this being a vital component in prevention of maternal-to-child transmission. The aim of this study was to evaluate clinicians' knowledge on HIV in relation to breast-feeding in Kenya. A cross-sectional survey was conducted to assess knowledge of 161 clinical officers and nurses serving in the maternity and children' wards in various hospitals in Kenya. The participants were derived from all district and provincial referral facilities in Kenya. A preformatted questionnaire containing a series of questions on HIV and breast-feeding was administered to clinicians who were then scored and analyzed. All the 161 participants responded. Majority of clinicians (92%) were knowledgeable regarding prevention of mother-to-child transmission. Regarding HIV and breast-feeding, 49.7% thought expressed breast milk from HIV-positive mothers should be heated before being given. Majority (78.3%) thought breast milk should be given regardless of availability of alternatives. According to 74.5% of the participants, exclusive breast-feeding increased chances of HIV transmission. Two-thirds (66.5%) would recommend breast-feeding for mothers who do not know their HIV status (66.5%). This study observes that a majority of the clinicians have inadequate knowledge on breast-feeding in the face of HIV. There is need to promote training programmes on breast-feeding and transmission of HIV from mother to child. This can be done as in

  13. Risk assessment of coccidostatics during feed cross-contamination: Animal and human health aspects

    International Nuclear Information System (INIS)

    Dorne, J.L.C.M.; Fernández-Cruz, M.L.; Bertelsen, U.; Renshaw, D.W.; Peltonen, K.; Anadon, A.; Feil, A.; Sanders, P.; Wester, P.; Fink-Gremmels, J.

    2013-01-01

    Coccidiosis, an intestinal plasmodium infection, is a major infectious disease in poultry and rabbits. Eleven different coccidiostats are licensed in the EU for the prevention of coccidiosis in these animal species. According to their chemical nature and main biological activity, these compounds can be grouped as ionophoric (monensin, lasalocid sodium, salinomycin, narasin, maduramicin and semduramicin) or non-ionophoric (robenidine, decoquinate, nicarbazin, diclazuril, and halofuginone) substances. Coccidiostats are used as feed additives, mixed upon request into the compounded feed. During the technical process of commercial feed production, cross-contamination of feed batches can result in the exposure of non-target animals and induce adverse health effects in these animals due to a specific sensitivity of mammalian species as compared to poultry. Residue formation in edible tissues of non-target species may result in unexpected human exposure through the consumption of animal products. This review presents recent risk assessments performed by the Scientific Panel on Contaminants in the Food Chain (CONTAM) of the European Food Safety Authority (EFSA). The health risk to non-target species that would result from the consumption of cross-contaminated feed with coccidostats at levels of 2, 5 or 10% was found to be negligible for most animal species with the exception of salinomycin and monensin in horses because of the particular sensitivity for which toxicity may occur when cross-contamination exceeds 2% and 5% respectively. Kinetic data and tissue analyses showed that residues of coccidiostats may occur in the liver and eggs in some cases. However, the level of residues of each coccidiostat in edible animal tissues remained sufficiently low that the aggregate exposure of consumers would not exceed the established acceptable daily intake (ADI) of each coccidiostat. It could be concluded that technical cross-contamination of animal feeds would not be expected to

  14. Risk assessment of coccidostatics during feed cross-contamination: Animal and human health aspects

    Energy Technology Data Exchange (ETDEWEB)

    Dorne, J.L.C.M., E-mail: jean-lou.dorne@efsa.europa.eu [European Food Safety Authority, Unit on Contaminants in the Food Chain, Parma (Italy); Fernández-Cruz, M.L. [Instituto Nacional de Investigación y Tecnología Agraria y Alimentaria, Madrid (Spain); Bertelsen, U. [European Food Safety Authority, Unit on Contaminants in the Food Chain, Parma (Italy); Renshaw, D.W. [Food Standards Agency, London (United Kingdom); Peltonen, K. [Finnish Food Safety Authority, EVIRA, Helsinki (Finland); Anadon, A. [Universidad Complutense de Madrid, Facultad de Veterinaria, Madrid (Spain); Feil, A. [ForschungsinstitutFuttermitteltechnik, Braunschweig (Germany); Sanders, P. [AFSSA, LERMVD, Fougères (France); Wester, P. [RIVM, Food and Consumer Safety, Bilthoven (Netherlands); Fink-Gremmels, J. [Utrecht University, Veterinary Medicine, Utrecht (Netherlands)

    2013-08-01

    Coccidiosis, an intestinal plasmodium infection, is a major infectious disease in poultry and rabbits. Eleven different coccidiostats are licensed in the EU for the prevention of coccidiosis in these animal species. According to their chemical nature and main biological activity, these compounds can be grouped as ionophoric (monensin, lasalocid sodium, salinomycin, narasin, maduramicin and semduramicin) or non-ionophoric (robenidine, decoquinate, nicarbazin, diclazuril, and halofuginone) substances. Coccidiostats are used as feed additives, mixed upon request into the compounded feed. During the technical process of commercial feed production, cross-contamination of feed batches can result in the exposure of non-target animals and induce adverse health effects in these animals due to a specific sensitivity of mammalian species as compared to poultry. Residue formation in edible tissues of non-target species may result in unexpected human exposure through the consumption of animal products. This review presents recent risk assessments performed by the Scientific Panel on Contaminants in the Food Chain (CONTAM) of the European Food Safety Authority (EFSA). The health risk to non-target species that would result from the consumption of cross-contaminated feed with coccidostats at levels of 2, 5 or 10% was found to be negligible for most animal species with the exception of salinomycin and monensin in horses because of the particular sensitivity for which toxicity may occur when cross-contamination exceeds 2% and 5% respectively. Kinetic data and tissue analyses showed that residues of coccidiostats may occur in the liver and eggs in some cases. However, the level of residues of each coccidiostat in edible animal tissues remained sufficiently low that the aggregate exposure of consumers would not exceed the established acceptable daily intake (ADI) of each coccidiostat. It could be concluded that technical cross-contamination of animal feeds would not be expected to

  15. Preliminary Assessment of the Hanford Tank Waste Feed Acceptance and Product Qualification Programs

    Energy Technology Data Exchange (ETDEWEB)

    Herman, C. C.; Adamson, Duane J.; Herman, D. T.; Peeler, David K.; Poirier, Micheal R.; Reboul, S. H.; Stone, M. E.; Peterson, Reid A.; Chun, Jaehun; Fort, James A.; Vienna, John D.; Wells, Beric E.

    2013-04-01

    The U.S. Department of Energy Office of Environmental Management (EM) is engaging the national laboratories to provide the scientific and technological rigor to support EM program and project planning, technology development and deployment, project execution, and assessment of program outcomes. As an early demonstration of this new responsibility, Savannah River National Laboratory (SRNL) and Pacific Northwest National Laboratory (PNNL) have been chartered to implement a science and technology program addressing Hanford Tank waste feed acceptance and product qualification. As a first step, the laboratories examined the technical risks and uncertainties associated with the planned waste feed acceptance and qualification testing for Hanford tank wastes. Science and technology gaps were identified for work associated with 1) feed criteria development with emphasis on identifying the feed properties and the process requirements, 2) the Tank Waste Treatment and Immobilization Plant (WTP) process qualification program, and 3) the WTP HLW glass product qualification program. Opportunities for streamlining the accetpance and qualification programs were also considered in the gap assessment. Technical approaches to address the science and technology gaps and/or implement the opportunities were identified. These approaches will be further refined and developed as strong integrated teams of researchers from national laboratories, contractors, industry, and academia are brought together to provide the best science and technology solutions. Pursuing the identified approaches will have immediate and long-term benefits to DOE in reducing risks and uncertainties associated with tank waste removal and preparation, transfers from the tank farm to the WTP, processing within the WTP Pretreatment Facility, and in producing qualified HLW glass products. Additionally, implementation of the identified opportunities provides the potential for long-term cost savings given the anticipated

  16. Attributional versus consequential life cycle assessment and feed optimization

    NARCIS (Netherlands)

    Zanten, van Hannah H.E.; Bikker, Paul; Meerburg, Bastiaan G.; Boer, de Imke J.M.

    2018-01-01

    Purpose: Feed production is responsible for the majority of the environmental impact of livestock production, especially for monogastric animals, such as pigs. Some feeding strategies demonstrated that replacing one ingredient with a high impact, e.g. soybean meal (SBM), with an alternative

  17. 76 FR 60941 - Policy Regarding Submittal of Amendments for Processing of Equivalent Feed at Licensed Uranium...

    Science.gov (United States)

    2011-09-30

    ... Processing of Equivalent Feed at Licensed Uranium Recovery Facilities AGENCY: Nuclear Regulatory Commission... State-licensed uranium recovery site, either conventional, heap leach, or in situ recovery. DATES... Regarding Submittal of Amendments for Processing of Equivalent Feed at Licensed Uranium Recovery Facilities...

  18. Feed supplemented with byproducts from olive oil mill wastewater processing increases antioxidant capacity in broiler chickens.

    Science.gov (United States)

    Gerasopoulos, Konstantinos; Stagos, Dimitrios; Kokkas, Stylianos; Petrotos, Konstantinos; Kantas, Dimitrios; Goulas, Panagiotis; Kouretas, Dimitrios

    2015-08-01

    In the present study, a ceramic membrane microfiltration method was used for the separation of two liquid products, the downstream permeate and the upstream retentate, from olive mill wastewater (OMWW). These liquid products were examined for their antioxidant activity by incorporating them into broilers' feed. Twenty four broilers 13 d old were divided into two feeding groups receiving supplementation with OMWW retentate or permeate for 37 d. Blood was drawn at 17, 27 and 37 d, while tissues (muscle, heart, liver) were collected at 37 d. The antioxidant effects were assessed by measuring oxidative stress biomarkers in blood and tissues. The results showed that broilers given feed supplemented with OMWW retentate or permeate had significantly lower protein oxidation and lipid peroxidation levels and higher total antioxidant capacity in plasma and tissues compared to control group. In both OMWW groups, catalase activity in erythrocytes and tissues was significantly increased compared to control group. OMWW retentate administration increased significantly GSH in erythrocytes in broilers with low GSH, although both OMWW products significantly reduced GSH in broilers with high GSH. Thus, it has been demonstrated for the first time that supplementation with OMWW processing residues could be used for enhancing broilers' redox status. Copyright © 2015 Elsevier Ltd. All rights reserved.

  19. Gamma radiation pretreatment in processing technology of ruminant feed: a pilot scale trial run

    International Nuclear Information System (INIS)

    Mat Rasol Awang

    2002-01-01

    The technology for production ruminant feed from agriculture by-product remains scare despite plentiful availability of feeding materials worldwide. Factors that prohibit the process technology development suggested that their peculiar physical make up, high cost of production and inferior product quality compared to established raw material, had consequently impeding the effort. In Malaysia, only two pilot plants exist; they demonstrate utilization of Oil Palm Frond (OPF) into feed. In the case of OPF in situ utilization as feed, farmers use chipper machine or shredder to process it. Other by-products have not been successfully exploited, except for Palm Kernel Cake (PKC) and Palm Oil Mill Effluent (POME) that already in commercial operation. In view of the by-product availability as feeding material in ruminant feeding system and availability of new chipper and shredder machines, the prospect of processing agriculture by-products into feed is expected to be a promising business venture. This paper describes the technology for production of new feed from oil palm Empty Fruit Bunch (EFB). It elaborates on Sterifeed Plant Operation based on plant capacity of 0.5 ton/day production. The operation aspects discuss raw materials handling and pretreatment involving γ-ray as an integral part of the total system. In this process EFB initially pasteurized and predigested by fungi in fermentation process into feed materials, and the product were fed in fresh form to animal. The operation exercise had established actual process flow, identified problems and process drawbacks. Based on this experience, availability of localized raw materials EFB at the palm oil mill and rapid development of processing machinery, it is very likely that a commercially viable feed processing plant can be established in the near future. (Author)

  20. Interim Feed The Future Population Based Assessment of Cambodia

    Data.gov (United States)

    US Agency for International Development — This is the interim population based survey of Feed the Future in Cambodia for 2015. The data is split into survey modules. Modules A through C includes location...

  1. Feeding by larvae of intertidal invertebrates: assessing their position in pelagic food webs.

    Science.gov (United States)

    Vargas, Cristian A; Manríquez, Patricio H; Navarrete, Sergio A

    2006-02-01

    One of the leading determinants of the structure and dynamics of marine populations is the rate of arrival of new individuals to local sites. While physical transport processes play major roles in delivering larvae to the shore, these processes become most important after larvae have survived the perils of life in the plankton, where they usually suffer great mortality. The lack of information regarding larval feeding makes it difficult to assess the effects of food supply on larval survival, or the role larvae may play in nearshore food webs. Here, we examine the spectrum of food sizes and food types consumed by the larvae of two intertidal barnacle species and of the predatory gastropod Concholepas concholepas. We conducted replicated experiments in which larvae were exposed to the food size spectrum (phytoplankton, microprotozoan and autotrophic picoplankton) found in nearshore waters in central Chile. Results show that barnacle nauplii and gastropod veligers are omnivorous grazers, incorporating significant fractions of heterotrophs in their diets. In accordance with their feeding mechanisms and body size, barnacle nauplii were able to feed on autotrophic picoplankton (concholepas larvae also consumed picoplankton cells, while competent larvae of this species ingested mostly the largest phytoplankton cells and heterotrophic protozoans. Results suggest that persistent changes in the structure of pelagic food webs can have important effects on the species-specific food availability for invertebrate larvae, which can result in large-scale differences in recruitment rates of a given species, and in the relative recruitment success of the different species that make up benthic communities.

  2. Faba beans and peas in poultry feed: economic assessment.

    Science.gov (United States)

    Proskina, Liga; Cerina, Sallija

    2017-10-01

    Broiler diets mainly consist of cereals and protein-rich feed sources; in the EU-27, poultry farming consumes 24% of the total amount of protein-rich feedstuffs. Since the EU produces only 30% of the total quantity of protein crops used for feed, it is necessary to promote the use of traditional European protein crops (beans, peas) for feed in livestock farming. The research aim is to identify economic gains from the production of broiler chicken meat, replacing soybean meal with domestic faba beans and field peas in broiler chicken diets. Adding field peas and faba beans to the broiler feed ration resulted in a significant live weight increase (5.74-11.95%) at the selling age, a decrease in the feed conversion ratio by 0.61-6.06%, and decrease in the product unit cost (15.34-37.06%) as well as an increase in the production efficiency factor (8.70-48.54), compared with the control group. The optimum kind of legume species used in the broiler diet was peas, which were added in the amount of 200 g kg -1 , resulting in live weight gain, a decrease in the feed conversion ratio and an increase in the production efficiency factor. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  3. New handling systems as technical support for the working process. Part 6. Feeding devices

    Energy Technology Data Exchange (ETDEWEB)

    Becher, H; Burkhardt, R; Drexel, P; Graf, B; Krreis, W

    1982-03-01

    Social, technical and economic reasons require an enhanced application of handling systems such as industrial robots. Quality and efficiency of an industrial robot depends greatly on feeding devices, and the ARGE-HHS within its project new handling systems as a technical aid in the working process intends to analyze all feeding devices that are likely to be most suitable for advanced applications. Forty one feeding devices were developed, known devices were modified, adapted to different applications, and tested. A variety of feeding devices for most applications in the field of material handling is reported.

  4. A review of control strategies for manipulating the feed rate in fed-batch fermentation processes

    DEFF Research Database (Denmark)

    Mears, Lisa; Stocks, Stuart M.; Sin, Gürkan

    2017-01-01

    . This review covers a range of strategies which have been employed to use the feed rate as a manipulated variable in a control strategy. The feed rate is chosen as the focus for this review, as it is seen that this variable may be used towards many different objectives depending on the process of interest...

  5. System analysis of the quality of life self-assessments from the SF-36 questionnaire in breast-feeding or milk formula feeding women

    Directory of Open Access Journals (Sweden)

    O. G. Ivanko

    2016-08-01

    Full Text Available Objective. A system analysis of the self-assessments of quality of life (QOL and the possible rational correction of psychological dysadaptation of nursing women. Materials and Methods. A survey among 134 healthy women aged 21 to 40, married and having children aged 1 to 12 months at the time of the survey. The first group consisted of women with breast-fed children (1 to 6 months old and “exclusively breastfed” or 6 to 12 months old and receiving “rational breast feeding”; the second group consisted of women with formula-fed children. The non-specific SF-36 questionnaire has been used for the survey. Statistica 6.0 licensed software has been used for statistical processing of gathered scores. Results. The breast-feeding women (Group 1 showed higher total results in self-assessment of the quality of life compared to the women forced to feed their children with breast milk substitutes (Group 2. The difference affects all 8 scales of the questionnaire, thus varying from the a priori values of the “null hypothesis” (χ2=5.33, df=1 with statistical error probability of p=0.02. The most significant differences of the SF-36 questionnaire assessment indicator scores between the two groups have been identified on BP (intensity and frequency of pain and MH (mental health scales. Conclusions. Our observations have shown significant differences of self-assessments of QOL by women feeding their children in different ways. Breast feeding leads to positive changes in the system of self-assessment of QOL, the lives of nursing women are characterized by greater social support and role activity; they are more socially adapted, not prone to depression and unreasonable mood swings.

  6. Dual temperature isotope exchange process using hot feed with liquid recycle from the humidifier

    International Nuclear Information System (INIS)

    Paulis, G.J.C.A.

    1977-01-01

    This invention relates to an improvement in the dual temperature substances at two temperatures. It provides hot feed process, which while keeping the water purity advantages offered by a recycle of liquid, reduces the energy requirements of the process saving in capital cost over previous hot feed process, at equal production rate, or conversely which offers a substantial increase in production rate at equal capital costs

  7. Verteerbaarheid van biologisch geteelde veevoedergrondstoffen bij leghennen = Digestibility of organic processed feed ingredients in laying hens

    NARCIS (Netherlands)

    Krimpen, van M.M.; Diepen, van J.T.M.; Reuvekamp, B.F.J.; Harn, van J.

    2011-01-01

    In two experiments, digestibility and nutritive value for laying hens of organically-grown feed raw materials was assessed. Digestibility and metabolisable energy content of the products differed considerably compared to those listed in the CVB Feedstuff Table.

  8. Evaluation of feeds for melt and dilute process using an analytical hierarchy process

    International Nuclear Information System (INIS)

    Krupa, J.F.

    2000-01-01

    Westinghouse Savannah River Company was requested to evaluate whether nuclear materials other than aluminum-clad spent nuclear fuel should be considered for treatment to prepare them for disposal in the melt and dilute facility as part of the Treatment and Storage Facility currently projected for construction in the L-Reactor process area. The decision analysis process used to develop this analysis considered many variables and uncertainties, including repository requirements that are not yet finalized. The Analytical Hierarchy Process using a ratings methodology was used to rank potential feed candidates for disposition through the Melt and Dilute facility proposed for disposition of Savannah River Site aluminum-clad spent nuclear fuel. Because of the scoping nature of this analysis, the expert team convened for this purpose concentrated on technical feasibility and potential cost impacts associated with using melt and dilute versus the current disposition option. This report documents results of the decision analysis

  9. Evaluation of feeds for melt and dilute process using an analytical hierarchy process

    Energy Technology Data Exchange (ETDEWEB)

    Krupa, J.F.

    2000-03-22

    Westinghouse Savannah River Company was requested to evaluate whether nuclear materials other than aluminum-clad spent nuclear fuel should be considered for treatment to prepare them for disposal in the melt and dilute facility as part of the Treatment and Storage Facility currently projected for construction in the L-Reactor process area. The decision analysis process used to develop this analysis considered many variables and uncertainties, including repository requirements that are not yet finalized. The Analytical Hierarchy Process using a ratings methodology was used to rank potential feed candidates for disposition through the Melt and Dilute facility proposed for disposition of Savannah River Site aluminum-clad spent nuclear fuel. Because of the scoping nature of this analysis, the expert team convened for this purpose concentrated on technical feasibility and potential cost impacts associated with using melt and dilute versus the current disposition option. This report documents results of the decision analysis.

  10. Adolescent fathers: knowledge of and involvement in the breast feeding process in Brazil.

    Science.gov (United States)

    Torres de Lacerda, Ana Catarina; Lucena de Vasconcelos, Maria Gorete; Nascimento de Alencar, Eloine; Osório, Mônica Maria; Pontes, Cleide Maria

    2014-03-01

    to understand the ways in which adolescent fathers participate in the breast feeding process in the family environment in North-eastern Brazil. a descriptive, exploratory, qualitative study was undertaken involving 10 couples with infants aged 6-8 months living in a single community in Recife, Pernambuco, Brazil. Data were collected using semi-structured interviews with questions to guide the interviewer. Data were analysed using thematic content analysis, and interpreted under the theoretical reference of being an adolescent father within the context of breast feeding. from the data collected, three themes were identified: knowledge of the benefits of breast feeding for the child's health; discontinued participation of the father in breast feeding during the pregnancy-childbearing cycle; and exclusion of the adolescent father from the breast feeding process. The adolescent fathers knew about the benefits of breast feeding in terms of the child's health, but did not mention benefits for the mother, the family or society. For some adolescent fathers, their participation in the breast feeding process started during pregnancy, whereas for others, it was only initiated after the infant was born. One of the fathers was prevented, by his wife and mother-in-law, from participating in the breast feeding process. the involvement of adolescent fathers in the breast feeding process oscillated during the pregnancy-childbearing cycle. This may be due to the patriarchal cultural heritage, Brazilian paternity laws, and the fact that these fathers were adolescents. This study showed that adolescent parents were knowledgeable about breast feeding. Finally, fathers want a new model of parenting in which the man participates in child care. Crown Copyright © 2013. Published by Elsevier Ltd. All rights reserved.

  11. Transfer of chemicals from feed to animal products: The use of transfer factors in risk assessment

    NARCIS (Netherlands)

    Leeman, W.R.; Berg, K.J. van den; Houben, G.F.

    2007-01-01

    The human risk assessment of feed contaminants has often been hampered by a lack of knowledge concerning their behaviour when consumed by livestock. To gain a better understanding of the transfer of contaminants from animal feed to animal products, a meta-analysis of public literature was made. Data

  12. Dairy cow feeding space requirements assessed in a Y-maze choice test

    OpenAIRE

    Rioja-Lang, F. C.; Roberts, D. J.; Healy, S. D.; Lawrence, Alistair; Haskell, M. J.

    2012-01-01

    The effect of proximity to a dominant cow on a low-ranking cow's willingness to feed was assessed using choice tests. The main aim of the experiment was to determine the feeding space allowance at which the majority of subordinate cows would choose to feed on high-palatability food (HPF) next to a dominant cow rather than feeding alone on low-palatability food (LPF). Thirty Holstein-Friesian cows were used in the study. Half of the cows were trained to make an association between a black bin ...

  13. ITSM process assessment supporting ITIL

    CERN Document Server

    Barafort, Béatrix; Cortina, Stéphane

    2009-01-01

    The key to any successful IT Service Management solution are strong, clear processes that are fit for purpose. The continual cycle of service improvements must therefore look at the existing processes and assess how effective they are within changing business requirements.This innovative title not only looks at this fundamental process assessment, it does it using the key ISO/IEC standard in this area. In brief, this title explains the meeting between two standards:ITIL: the de facto standard in IT Service Management.ISO/IEC 15504 Information technology - Process assessmentReaders can therefor

  14. Evaluation of feeds for melt and dilute process using an Analytical Hierarchy Process

    International Nuclear Information System (INIS)

    Krupa, J.F.

    2000-01-01

    WSRC was requested to evaluate whether nuclear materials other than aluminum-clad spent nuclear fuel should be considered for treatment to prepare them for disposal in the melt and dilute facility as part of the Treatment and Storage Facility (TSF) currently projected for construction in the L-Reactor process area. The Analytical Hierarchy Process using a ratings methodology was used to rank potential feed candidates for disposition through the Melt and Dilute facility proposed for disposition of Savannah River Site aluminum-clad spent nuclear fuel. Because of the scoping nature of this analysis, the expert team convened for this purpose concentrated on technical feasibility and potential cost impacts associated with using melt and dilute versus the current disposition option

  15. A hierarchical Markov decision process modeling feeding and marketing decisions of growing pigs

    DEFF Research Database (Denmark)

    Pourmoayed, Reza; Nielsen, Lars Relund; Kristensen, Anders Ringgaard

    2016-01-01

    Feeding is the most important cost in the production of growing pigs and has a direct impact on the marketing decisions, growth and the final quality of the meat. In this paper, we address the sequential decision problem of when to change the feed-mix within a finisher pig pen and when to pick pigs...... for marketing. We formulate a hierarchical Markov decision process with three levels representing the decision process. The model considers decisions related to feeding and marketing and finds the optimal decision given the current state of the pen. The state of the system is based on information from on...

  16. 3.1.1.2 Feed Processing and Handling DL2 Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Elliott, Douglas C.; Magnuson, Jon K.; Wend, Christopher F.

    2006-09-30

    This milestone report is the deliverable for our Feed Processing and Handling project. It includes results of wet biomass feedstock analysis, slurry pumping information, fungal processing to produce a lignin-rich biorefinery residue and two subcontracted efforts to quantify the amount of wet biomass feedstocks currently available within the corn processing and paper processing industries.

  17. Processing ruminal ingesta to release bacteria attached to feed ...

    African Journals Online (AJOL)

    A comparison was made of different methods of processing ingesta to release bacteria attached to solid particles, prior to making viable counts. Initially processing was performed under a stream of anaerobic gas and counts were made using the roll tube technique. Later, processing was done in an anaerobic cabinet and ...

  18. The process of performance assessment

    International Nuclear Information System (INIS)

    King, C.M.; Halford, D.K.

    1986-01-01

    An introductory review of the subject of ''Performance Assessment'' will be presented. Emphasis will be placed on the process of performance assessment from the standpoint of defining the process. Performance assessment, from evolving experience at DOE sites, has short-term and long-term subprograms, the components of which will be discussed. The role of mathematical modeling in performance assessment will be addressed including the pros and cons of current approaches. Finally, the ''system/site/technology'' issues as the focal point of this symposium will be reviewed

  19. Data evaluation techniques used for groundwater quality assessment at the Feed Materials Production Center

    International Nuclear Information System (INIS)

    Harmon, J.E.; Longmire, P.K.

    1990-01-01

    The Feed Materials Production Center has implemented a monitoring program which includes over 300 wells and piezometers to assess the impact of its operations on the ground water. Large volumes of monitoring data are being collected in support of a Remedial Investigation and Feasibility Study, a Resource Conservation and Recovery Act ground water quality assessment program, and an underground storage tank investigation. This program aims to establish background or upgradient ground water constituent concentrations, identify the presence and amount of contamination, determine the migration rate and extent of any contamination found, develop and calibrate hydrological and solute transport models, and track the progress of cleanup activities. This paper addresses the methodologies used for evaluation of the data generated by this program. A discussion will be provided on the decision making process utilized for selecting the appropriate statistical procedures, and the progress made in analysis of the ground water data

  20. Potential aflatoxin and ochratoxin a production by Aspergillus species in poultry feed processing.

    Science.gov (United States)

    Fraga, M E; Curvello, F; Gatti, M J; Cavaglieri, L R; Dalcero, A M; da Rocha Rosa, C A

    2007-04-01

    Poultry feeds are prone to fungal growth and mycotoxin production during processing. The identification of biota with the ability to produce mycotoxins is essential. The aims of this study were (1) to monitor the mycobiota counts at different stages of poultry feed processing; (2) to determine the occurrence of Aspergillus species; (3) to evaluate the natural incidence of aflatoxins and ochratoxin A. The ability of Aspergillus spp. and its teleomorphs isolated here to produce these toxins was also investigated. Samples (144) were collected at random from a factory in Brazil. The occurrence of Aspergillus and Eurotium species was demonstrated on DRBC and DG18 media and the production of aflatoxins and ochratoxin A and their natural incidence were determined by TLC and HPLC methods. A. flavus and E. chevalieri were the most prevalent species isolated. Fungal contamination was not found after the pelleting process, though Aspergillus and Eurotium species were recovered from trough samples. High levels of aflatoxin and ochratoxin A producers were found at all stages of poultry feed processing. Also, high natural contamination with aflatoxins and ochratoxin A was found in the samples. Contact of feed with remainder poultry feed could lead to fungal contamination, so the risk of aflatoxin and/or ochratoxin A contamination of feed must be taken into account.

  1. Bioprocessing papaya processing waste for potential aquaculture feed supplement--economic and nutrient analysis with shrimp feeding trial.

    Science.gov (United States)

    Kang, H Y; Yang, P Y; Dominy, W G; Lee, C S

    2010-10-01

    Papaya processing waste (PPW), a major fruit processing waste in the Hawaii islands, served as substrate for yeast (Saccharomyces cerevisiae) growth. The fermented PPW products containing nutrients of 45% crude protein and various fat, fiber, lignin, cellulose, and minerals were advantages to nutrients of yeast alone. Three experimental diets controlled at 35% protein formulation containing different levels of inclusion of PPW products and a commercial control diet were fed to shrimps for 8 weeks. The 50% inclusion of PPW diets were comparable to commercial feed in weight, growth, feed conversion ratio (FCR) and survival rate. Such bioprocess treatment system would be economically feasible with the control of annual cost and increase of the amount of PPW treated. The selling price of PPW products and annual operation and maintenance cost were the most influential factors to additional profits. This study presented a promising alternative for environmental-friendly treatment of organic wastes as well as the sustainability of local agriculture and aquaculture industries. Copyright © 2010 Elsevier Ltd. All rights reserved.

  2. Feeding value of processed horse eye bean ( Mucuna urens ) meal ...

    African Journals Online (AJOL)

    The study was designed to evaluate the performance of pullet chicks fed graded levels of processed horse eye bean meal (HEBM) as partial replacement for soybean meal. The cracked beans were subjected to three processing methods viz: soaking in plain water for 48 hours, cooking for 90 minutes, and toasting on open ...

  3. Development of a theory-based questionnaire to assess structure and control in parent feeding (SCPF).

    Science.gov (United States)

    Savage, Jennifer S; Rollins, Brandi Y; Kugler, Kari C; Birch, Leann L; Marini, Michele E

    2017-01-26

    Parents shape children's eating environments and act as powerful socialization agents, impacting young children's behavioral controls of food intake. Most feeding measures assess parents' use of control to manage children's intake of energy dense foods. The Structure and Control in Parent Feeding (SCPF) questionnaire was developed to assess more positive aspects of feeding practices with their young children -setting limits, providing routines-that promote self-regulation, as well as controlling feeding practices. A mixed method approach was used to develop the SCPF. In 2013, cognitive interviews informed the modification, deletion and/or replacement of items. In 2014, the survey was distributed statewide to mothers of toddlers aged 12 to 36 months participating in the Women, Infants, and Children program. In 2016, exploratory factor analyses was conducted to test our theoretical parenting model and content validity and criterion validity were assessed (n = 334). Exploratory factor analysis (EFA) and second-order EFA revealed a 2-factor, 22-item Structure model and a 2-factor, 12-item Control model. Internal consistencies for all factors exceeded 0.70. As predicted, the Structure superfactor was positivity associated with responsiveness, whereas the Control superfactor was positively associated with demandingness on the Caregiver's Feeding Styles Questionnaire. The Structure subscales were also positively associated with mealtime behaviors and Control subscales were positively associated with control-oriented feeding measures from the Control in Parent Feeding Practices questionnaire. The SCPF questionnaire is a reliable tool that can be used to assess aspects of structure- and control-based feeding practices to better understand how parents feed their toddlers.

  4. Simultaneous Sensor and Process Fault Diagnostics for Propellant Feed System

    Science.gov (United States)

    Cao, J.; Kwan, C.; Figueroa, F.; Xu, R.

    2006-01-01

    The main objective of this research is to extract fault features from sensor faults and process faults by using advanced fault detection and isolation (FDI) algorithms. A tank system that has some common characteristics to a NASA testbed at Stennis Space Center was used to verify our proposed algorithms. First, a generic tank system was modeled. Second, a mathematical model suitable for FDI has been derived for the tank system. Third, a new and general FDI procedure has been designed to distinguish process faults and sensor faults. Extensive simulations clearly demonstrated the advantages of the new design.

  5. Feed Forward Artificial Neural Network Model to Estimate the TPH Removal Efficiency in Soil Washing Process

    Directory of Open Access Journals (Sweden)

    Hossein Jafari Mansoorian

    2017-01-01

    Full Text Available Background & Aims of the Study: A feed forward artificial neural network (FFANN was developed to predict the efficiency of total petroleum hydrocarbon (TPH removal from a contaminated soil, using soil washing process with Tween 80. The main objective of this study was to assess the performance of developed FFANN model for the estimation of   TPH removal. Materials and Methods: Several independent repressors including pH, shaking speed, surfactant concentration and contact time were used to describe the removal of TPH as a dependent variable in a FFANN model. 85% of data set observations were used for training the model and remaining 15% were used for model testing, approximately. The performance of the model was compared with linear regression and assessed, using Root of Mean Square Error (RMSE as goodness-of-fit measure Results: For the prediction of TPH removal efficiency, a FANN model with a three-hidden-layer structure of 4-3-1 and a learning rate of 0.01 showed the best predictive results. The RMSE and R2 for the training and testing steps of the model were obtained to be 2.596, 0.966, 10.70 and 0.78, respectively. Conclusion: For about 80% of the TPH removal efficiency can be described by the assessed regressors the developed model. Thus, focusing on the optimization of soil washing process regarding to shaking speed, contact time, surfactant concentration and pH can improve the TPH removal performance from polluted soils. The results of this study could be the basis for the application of FANN for the assessment of soil washing process and the control of petroleum hydrocarbon emission into the environments.

  6. Waste Feed Delivery Purex Process Connector Design Pressure

    International Nuclear Information System (INIS)

    BRACKENBURY, P.J.

    2000-01-01

    The pressure retaining capability of the PUREX process connector is documented. A context is provided for the connector's current use within existing Projects. Previous testing and structural analyses campaigns are outlined. The deficient condition of the current inventory of connectors and assembly wrenches is highlighted. A brief history of the connector is provided. A bibliography of pertinent references is included

  7. Safety Assessment of Food and Feed from GM Crops in Europe: Evaluating EFSA's Alternative Framework for the Rat 90-day Feeding Study.

    Science.gov (United States)

    Hong, Bonnie; Du, Yingzhou; Mukerji, Pushkor; Roper, Jason M; Appenzeller, Laura M

    2017-07-12

    Regulatory-compliant rodent subchronic feeding studies are compulsory regardless of a hypothesis to test, according to recent EU legislation for the safety assessment of whole food/feed produced from genetically modified (GM) crops containing a single genetic transformation event (European Union Commission Implementing Regulation No. 503/2013). The Implementing Regulation refers to guidelines set forth by the European Food Safety Authority (EFSA) for the design, conduct, and analysis of rodent subchronic feeding studies. The set of EFSA recommendations was rigorously applied to a 90-day feeding study in Sprague-Dawley rats. After study completion, the appropriateness and applicability of these recommendations were assessed using a battery of statistical analysis approaches including both retrospective and prospective statistical power analyses as well as variance-covariance decomposition. In the interest of animal welfare considerations, alternative experimental designs were investigated and evaluated in the context of informing the health risk assessment of food/feed from GM crops.

  8. Performance assessment of coupled processes

    International Nuclear Information System (INIS)

    Pigford, T.H.

    1987-01-01

    The author considers all processes to be coupled. For example, a waste package heats the surrounding rock and its pore water, creating gradients in density and pressure that result in increased water flow. That process can be described as coupled, in that the flow is a consequence of heating. In a narrower sense, one speaks also of the more weakly coupled transport processes, expressed by the Onsager reciprocal relations, that state that a transport current, i.e., flux, of heat is accompanied by a small transport current of material, as evidenced in isotope separation by thermal diffusion, the Thompson effect in thermoelectricity, etc. This paper presents a performance assessment of coupled processes

  9. A clinical protocol to increase chewing and assess mastication in children with feeding disorders.

    Science.gov (United States)

    Volkert, Valerie M; Peterson, Kathryn M; Zeleny, Jason R; Piazza, Cathleen C

    2014-09-01

    Children with feeding disorders often cannot or do not chew when presented with table food. Children with chewing deficits also often swallow the bite before masticating it appropriately, which we will refer to as early swallowing. In the current study, we evaluated a clinical protocol to increase chews per bite, assess mastication, and eliminate early swallowing with three children with feeding disorders. The current study adds to a small body of literature on chewing and mastication of children with feeding disorders. Suggestions for future research are also discussed. © The Author(s) 2014.

  10. Evaluation of pre-PCR processing approaches for enumeration of Salmonella enterica in naturally contaminated animal feed

    DEFF Research Database (Denmark)

    Schelin, Jenny; Andersson, Gunnar; Vigre, Håkan

    2014-01-01

    Three pre‐PCR processing strategies for the detection and/or quantification of Salmonella in naturally contaminated soya bean meal were evaluated. Methods included: (i) flotation‐qPCR [enumeration of intact Salmonella cells prior to quantitative PCR (qPCR)], (ii) MPN‐PCR (modified most probable...... be due to the presence of nonculturable Salmonella and/or a heterogeneous distribution of Salmonella in the material. The evaluated methods provide different possibilities to assess the prevalence of Salmonella in feed, together with the numbers of culturable, as well as nonculturable cells, and can...... be applied to generate data to allow more accurate quantitative microbial risk assessment for Salmonella in the feed chain....

  11. Configuration Management Process Assessment Strategy

    Science.gov (United States)

    Henry, Thad

    2014-01-01

    Purpose: To propose a strategy for assessing the development and effectiveness of configuration management systems within Programs, Projects, and Design Activities performed by technical organizations and their supporting development contractors. Scope: Various entities CM Systems will be assessed dependent on Project Scope (DDT&E), Support Services and Acquisition Agreements. Approach: Model based structured against assessing organizations CM requirements including best practices maturity criteria. The model is tailored to the entity being assessed dependent on their CM system. The assessment approach provides objective feedback to Engineering and Project Management of the observed CM system maturity state versus the ideal state of the configuration management processes and outcomes(system). center dot Identifies strengths and risks versus audit gotcha's (findings/observations). center dot Used "recursively and iteratively" throughout program lifecycle at select points of need. (Typical assessments timing is Post PDR/Post CDR) center dot Ideal state criteria and maturity targets are reviewed with the assessed entity prior to an assessment (Tailoring) and is dependent on the assessed phase of the CM system. center dot Supports exit success criteria for Preliminary and Critical Design Reviews. center dot Gives a comprehensive CM system assessment which ultimately supports configuration verification activities.*

  12. Erosion/corrosion concerns in feed preparation systems at the Defense Waste Processing Facility

    International Nuclear Information System (INIS)

    Gee, J.T.; Chandler, C.T.; Daugherty, W.L.; Imrich, K.J.; Jenkins, C.F.

    1997-01-01

    The Savannah River Site (SRS) has been operating a nuclear fuel cycle since the 1950's to produce nuclear materials in support of the national defense effort. The Department of Energy authorized the construction of the Defense Waste Processing Facility (DWPF) to immobilize the high level radioactive waste resulting from these processes as a durable borosilicate glass. The DWPF, after having undergone extensive testing, has been approved for operations and is currently immobilizing radioactive waste. To ensure reliability of the DWPF remote canyon processing equipment, a materials evaluation program was performed prior to radioactive operations to determine to what extent erosion/corrosion would impact design life of equipment. The program consisted of performing pre-service baseline inspections on critical equipment and follow-up inspections after completion of DWPF cold chemical demonstration runs. Non-destructive examination (NDE) techniques were used to assess erosion/corrosion as well as evaluation of corrosion coupon racks. These results were used to arrive at predicted equipment life for selected feed preparation equipment. It was concluded with the exception of the coil and agitator for the slurry mix evaporator (SME), which are exposed to erosive glass frit particles, all of the equipment should meet its design life

  13. Hanford Waste Vitrification Plant full-scale feed preparation testing with water and process simulant slurries

    International Nuclear Information System (INIS)

    Gaskill, J.R.; Larson, D.E.; Abrigo, G.P.

    1996-03-01

    The Hanford Waste Vitrification Plant was intended to convert selected, pretreated defense high-level waste and transuranic waste from the Hanford Site into a borosilicate glass. A full-scale testing program was conducted with nonradioactive waste simulants to develop information for process and equipment design of the feed-preparation system. The equipment systems tested included the Slurry Receipt and Adjustment Tank, Slurry Mix Evaporator, and Melter-Feed Tank. The areas of data generation included heat transfer (boiling, heating, and cooling), slurry mixing, slurry pumping and transport, slurry sampling, and process chemistry. 13 refs., 129 figs., 68 tabs

  14. 78 FR 27303 - Irradiation in the Production, Processing, and Handling of Animal Feed and Pet Food; Electron...

    Science.gov (United States)

    2013-05-10

    ...-0178] Irradiation in the Production, Processing, and Handling of Animal Feed and Pet Food; Electron... electron beam and x-ray sources for irradiation of poultry feed and poultry feed ingredients. This action... CFR part 579) to provide for the safe use of electron beam and x-ray sources for irradiation of...

  15. Development of a questionnaire to assess maternal attitudes towards infant growth and milk feeding practices

    Directory of Open Access Journals (Sweden)

    Schiff Annie

    2011-04-01

    Full Text Available Abstract Background There is increasing recognition that public health strategies to prevent childhood obesity need to start early in life. Any behavioural interventions need to target maternal attitudes and infant feeding practices, This paper describes the development and preliminary validation of a questionnaire to assess maternal attitudes towards infant growth and milk feeding practices. Methods We designed a 57-item (19 questions, self-administered questionnaire to measure the following four domains- 1 type of milk feeding, decision making and sources of advice; 2 frequency and quantity of milk feeds; 3 attitudes to infant feeding and growth; and 4 theory-based beliefs about following infant feeding recommendations. Forty mothers completed the questionnaire on two occasions six days apart (to assess test-retest reliability and then participated in a semi-structured, open-ended telephone interview covering the same domains (to assess criterion validity. Percentage agreement, Cohen's Kappas (for categorical variables and Spearman's correlation coefficients (for continuous variables were used to quantify reliability and validity. Internal consistency between theory-based constructs (self-efficacy, outcome expectancy and intention was quantified by Chronbach's alpha. Results Of the 57 questionnaire items 51 (89% had percentage agreement above 70% indicating good test-retest reliability, and the remaining 6 items had moderate or substantial levels of agreement (kappa 0.41-0.68. Comparing questionnaire with interview coding (validity, percentage agreement was above 66% for 39/57 items (68%. Of the 16 items with percentage agreement below 66%, only five had kappa values below 0.20 (two items had insufficient interview responses. Internal consistency was 0.51, 0.79 and 0.90 for self-efficacy, outcome expectancy and intention respectively. Conclusions This questionnaire could be a useful tool in understanding the determinants of infant feeding and

  16. Systematic development and validation of a theory-based questionnaire to assess toddler feeding.

    Science.gov (United States)

    Hurley, Kristen M; Pepper, M Reese; Candelaria, Margo; Wang, Yan; Caulfield, Laura E; Latta, Laura; Hager, Erin R; Black, Maureen M

    2013-12-01

    This paper describes the development and validation of a 27-item caregiver-reported questionnaire on toddler feeding. The development of the Toddler Feeding Behavior Questionnaire was based on a theory of interactive feeding that incorporates caregivers' responses to concerns about their children's dietary intake, appetite, size, and behaviors rather than relying exclusively on caregiver actions. Content validity included review by an expert panel (n = 7) and testing in a pilot sample (n = 105) of low-income mothers of toddlers. Construct validity and reliability were assessed among a second sample of low-income mothers of predominately African-American (70%) toddlers aged 12-32 mo (n = 297) participating in the baseline evaluation of a toddler overweight prevention study. Internal consistency (Cronbach's α: 0.64-0.87) and test-retest (0.57-0.88) reliability were acceptable for most constructs. Exploratory and confirmatory factor analyses revealed 5 theoretically derived constructs of feeding: responsive, forceful/pressuring, restrictive, indulgent, and uninvolved (root mean square error of approximation = 0.047, comparative fit index = 0.90, standardized root mean square residual = 0.06). Statistically significant (P feeding behaviors, toddler overweight status, perceived toddler fussiness, and maternal mental health. The Toddler Feeding Behavior Questionnaire adds to the field by providing a brief instrument that can be administered in 5 min to examine how caregiver-reported feeding behaviors relate to toddler health and behavior.

  17. Systematic Development and Validation of a Theory-Based Questionnaire to Assess Toddler Feeding12

    Science.gov (United States)

    Hurley, Kristen M.; Pepper, M. Reese; Candelaria, Margo; Wang, Yan; Caulfield, Laura E.; Latta, Laura; Hager, Erin R.; Black, Maureen M.

    2013-01-01

    This paper describes the development and validation of a 27-item caregiver-reported questionnaire on toddler feeding. The development of the Toddler Feeding Behavior Questionnaire was based on a theory of interactive feeding that incorporates caregivers’ responses to concerns about their children’s dietary intake, appetite, size, and behaviors rather than relying exclusively on caregiver actions. Content validity included review by an expert panel (n = 7) and testing in a pilot sample (n = 105) of low-income mothers of toddlers. Construct validity and reliability were assessed among a second sample of low-income mothers of predominately African-American (70%) toddlers aged 12–32 mo (n = 297) participating in the baseline evaluation of a toddler overweight prevention study. Internal consistency (Cronbach’s α: 0.64–0.87) and test-retest (0.57–0.88) reliability were acceptable for most constructs. Exploratory and confirmatory factor analyses revealed 5 theoretically derived constructs of feeding: responsive, forceful/pressuring, restrictive, indulgent, and uninvolved (root mean square error of approximation = 0.047, comparative fit index = 0.90, standardized root mean square residual = 0.06). Statistically significant (P feeding behaviors, toddler overweight status, perceived toddler fussiness, and maternal mental health. The Toddler Feeding Behavior Questionnaire adds to the field by providing a brief instrument that can be administered in 5 min to examine how caregiver-reported feeding behaviors relate to toddler health and behavior. PMID:24068792

  18. Federal environmental assessment panel process

    International Nuclear Information System (INIS)

    Edwards, R.A.; King, J.M.

    1996-01-01

    The Government of Canada inaugurated an environmental assessment process in 1973. Since that time, the Department of Natural Resources, or its predecessor, the Department of Energy Mines and Resources, and industrial clients of the Department, have been major participants in the process. In 1995, the authors interviewed representatives of a number of client industries and selected individuals, to ask their opinion of the public hearing part of the environmental assessment process, with the objective of identifying shortcomings and proposing improvements. Respondents criticized the hearings as costly, time-wasting, bureaucratic, and uncertain in cost, time, and outcome. A number of observations on noted areas of shortcoming are presented in this paper, with suggestions for improvement

  19. Federal environmental assessment panel process

    Energy Technology Data Exchange (ETDEWEB)

    Edwards, R A; King, J M [Natural Resources Canada, Ottawa, ON (Canada)

    1997-12-31

    The Government of Canada inaugurated an environmental assessment process in 1973. Since that time, the Department of Natural Resources, or its predecessor, the Department of Energy Mines and Resources, and industrial clients of the Department, have been major participants in the process. In 1995, the authors interviewed representatives of a number of client industries and selected individuals, to ask their opinion of the public hearing part of the environmental assessment process, with the objective of identifying shortcomings and proposing improvements. Respondents criticized the hearings as costly, time-wasting, bureaucratic, and uncertain in cost, time, and outcome. A number of observations on noted areas of shortcoming are presented in this paper, with suggestions for improvement.

  20. The assessment and the farmers' perceived ranking of feed resources and coping strategies with feed scarcity in smallholder dairy farming in selected district towns of Jimma Zone, Ethiopia.

    Science.gov (United States)

    Duguma, Belay; Dermauw, Veronique; Janssens, Geert

    2017-06-01

    Inadequate quantity and quality of feed resources are major constraints limiting milk production and reproductive performance of dairy cattle in Ethiopia. The aim of this study was to assess dairy cattle feed resources, feeding practices, the farmers' perceived ranking of feed resources, causes of feed shortage, and coping strategies to feed scarcity in smallholder dairy system in selected district towns of Jimma Zone, Ethiopia. Data were obtained by interviewing 52 randomly selected smallholder dairy farmers using structured questionnaires and through direct observations. Results showed that 20 main feed types used by dairy farmers were identified and categorized into natural pastures, crop residues, green feeds, hay, agro-industrial by-products, concentrate mix, and non-conventional feeds. Overall, natural pasture (mean rank = 0.453), non-conventional feeds (0.307), cut green feeds (0.086), conserved hay (0.076), crop residues (0.049), and concentrate feeds (0.029) were ranked as the main feed resources in decreasing order of importance. Natural pasture grazing (92.2% of the respondents), hay (35.6%), and green feeds (29.4%) were the most important conventional basal feeds used. Wheat bran (11.7% of the respondents) followed by commercial concentrate mix (9.4%), Noug seedcake (8.3%), grain (7.8%), and molasses (6.1%) were the concentrate supplements used. Overall, bulule-flour mill leftovers (67.2% of the farmers), bean and pea hulls (57.2%) and atella-local brew by-product (37.2%), enset (Ensete ventricosum, 34.4%), and sugarcane top (32.2%) were the non-conventional feeds available and used during feed scarcity. Barley and teff (Eragrostis teff) straws and maize and sorghum stovers were the main crop residues used in the dry seasons. Overall, 73.9, 12.2, 12.2, and 1.7% of the respondents practiced free grazing, zero grazing, semi-zero, and a combination of zero- and free-grazing systems, respectively. Over 84% of the respondents in the dry season and 50% in

  1. EFFECT OF CURRENT, TIME, FEED AND CATHODE TYPE ON ELECTROPLATING PROCESS OF URANIUM SOLUTION

    Directory of Open Access Journals (Sweden)

    Sigit Sigit

    2017-02-01

    Full Text Available ABSTRACT   EFFECT OF CURRENT, TIME, FEED AND CATHODE TYPE ON ELECTROPLATING PROCESS OF URANIUM SOLUTION. Electroplating process of uranyl nitrate and effluent process has been carried out in order to collect uranium contained therein using electrode Pt / Pt and Pt / SS at various currents and times. Material used for electrode were Pt (platinum and SS (Stainlees Steel. Feed solution of 250 mL was entered into a beaker glass equipped with Pt anode - Pt cathode or Pt anode - SS cathode, then fogged direct current from DC power supply with specific current and time so that precipitation of uranium sticking to the cathode. After the processes completed, the cathode was removed and weighed to determine weight of precipitates, while the solution was analyzed to determine the uranium concentration decreasing after and before electroplating process. The experiments showed that a relatively good time to acquire uranium deposits at the cathode was 1 hour by current 7 ampere, uranyl nitrate as feed, and Pt (platinum as cathode. In these conditions, uranium deposits attached to the cathode amounted to 74.96% of the original weight of uranium oxide in the feed or 206.5 mg weight. The use of Pt cathode for  uranyl nitrate, SS and Pt cathode for effluent process feed gave uranium specific weight at the cathode of 12.99 mg/cm2, 2.4 mg/cm2 and 5.37 mg/cm2 respectively for current 7 ampere and electroplating time 1 hour. Keywords: Electroplating, uranyl nitrate, effluent process, Pt/Pt electrode, Pt/SS electrode

  2. Mixed U/Pu oxide fuel fabrication facility co-processed feed, pelletized fuel

    International Nuclear Information System (INIS)

    1978-09-01

    Two conceptual MOX fuel fabrication facilities are discussed in this study. The first facility in the main body of the report is for the fabrication of LWR uranium dioxide - plutonium dioxide (MOX) fuel using co-processed feed. The second facility in the addendum is for the fabrication of co-processed MOX fuel spiked with 60 Co. Both facilities produce pellet fuel. The spiked facility uses the same basic fabrication process as the conventional MOX plant but the fuel feed incorporates a high energy gamma emitter as a safeguard measure against diversion; additional shielding is added to protect personnel from radiation exposure, all operations are automated and remote, and normal maintenance is performed remotely. The report describes the fuel fabrication process and plant layout including scrap and waste processing; and maintenance, ventilation and safety measures

  3. Review and Assessment of Commercial Vendors/Options for Feeding and Pumping Biomass Slurries for Hydrothermal Liquefaction

    Energy Technology Data Exchange (ETDEWEB)

    Berglin, Eric J.; Enderlin, Carl W.; Schmidt, Andrew J.

    2012-11-01

    The National Advanced Biofuels Consortium is working to develop improved methods for producing high-value hydrocarbon fuels. The development of one such method, the hydrothermal liquefaction (HTL) process, is being led by the Pacific Northwest National Laboratory (PNNL). The HTL process uses a wet biomass slurry at elevated temperatures (i.e., 300 to 360°C [570 to 680°F]) and pressures above the vapor pressure of water (i.e., 15 to 20 MPa [2200 to 3000 psi] at these temperatures) to facilitate a condensed-phase reaction medium. The process has been successfully tested at bench-scale and development and testing at a larger scale is required to prove the viability of the process at production levels. Near-term development plans include a pilot-scale system on the order of 0.5 to 40 gpm, followed by a larger production-scale system on the order of 2000 dry metric tons per day (DMTPD). A significant challenge to the scale-up of the HTL process is feeding a highly viscous fibrous biomass wood/corn stover feedstock into a pump system that provides the required 3000 psi of pressure for downstream processing. In October 2011, PNNL began investigating commercial feed and pumping options that would meet these HTL process requirements. Initial efforts focused on generating a HTL feed and pump specification and then providing the specification to prospective vendors to determine the suitability of their pumps for the pilot-scale and production-scale plants. Six vendors were identified that could provide viable equipment to meet HTL feed and/or pump needs. Those six vendors provided options consisting three types of positive displacement pumps (i.e., diaphragm, piston, and lobe pumps). Vendors provided capabilities and equipment related to HTL application. This information was collected, assessed, and summarized and is provided as appendices to this report.

  4. 76 FR 63330 - Policy Regarding Submittal of Amendments for Processing of Equivalent Feed at Licensed Uranium...

    Science.gov (United States)

    2011-10-12

    ... Processing of Equivalent Feed at Licensed Uranium Recovery Facilities AGENCY: Nuclear Regulatory Commission... NRC and Agreement State-licensed uranium recovery site. This action is necessary to correct several... read ``(see Page A2 of SECY-99-011, ``Draft Rulemaking Plan: Domestic Licensing of Uranium and Thorium...

  5. Determination of processed animal proteins, including meat and bone meal, in animal feed

    NARCIS (Netherlands)

    Gizzi, G.; Holst, von C.; Baeten, V.; Berben, G.; Raamsdonk, van L.W.D.

    2004-01-01

    The presence of processed animal proteins (PAP), including meat and bone meal (MBM) from various species, in animal feed was investigated. It was demonstrated that microscopy is the most reliable method for enforcing the current total MBM ban in the European Uion (EU). It was shown that near

  6. HIERARCHIAL DESIGN AND EVALUATION OF PROCESSES TO GENERATE WASTE-RECYCLED FEEDS

    Science.gov (United States)

    Hierarchical Design and Evaluation of Processes to Generate Waste-Recycled FeedsRaymond L. SmithU.S. Environmental Protection AgencyOffice of Research and DevelopmentNational Risk Management Research Laboratory26 W. Martin Luther King DriveCincinna...

  7. Risk management of undesirable substances in feed following updated risk assessments

    International Nuclear Information System (INIS)

    Verstraete, Frans

    2013-01-01

    Directive 2002/32/EC of 7 May 2002 of the European Parliament and of the Council on undesirable substances in animal feed is the framework for the EU action on undesirable substances in feed. This framework Directive provides: ⁎that products intended for animal feed may enter for use in the Union from third countries, be put into circulation and/or used in the Union only if they are sound, genuine and of merchantable quality and therefore when correctly used do not represent any danger to human health, animal health or to the environment or could adversely affect livestock production. ⁎that in order to protect animal and public health and the environment, maximum levels for specific undesirable substances shall be established where necessary. ⁎for mandatory consultation of a scientific body (EFSA) for all provisions which may have an effect upon public health or animal health or on the environment. ⁎that products intended for animal feed containing levels of an undesirable substance that exceed the established maximum level may not be mixed for dilution purposes with the same, or other, products intended for animal feed and may not be used for the production of compound feed. Based on the provisions and principles laid down in this framework Directive, maximum levels for a whole range of undesirable substances have been established at EU level. During the discussions in view of the adoption of Directive 2002/32/EC, the European Commission made the commitment to review all existing provisions on undesirable substances on the basis of updated scientific risk assessments. Following requests of the European Commission, the Panel on Contaminants in the Food Chain (CONTAM) from the European Food Safety Authority (EFSA) has completed a series of 30 risk assessments undertaken over the last 5 years on undesirable substances in animal feed reviewing the possible risks for animal and human health due to the presence of these substances in animal feed. EU legislation

  8. Risk management of undesirable substances in feed following updated risk assessments

    Energy Technology Data Exchange (ETDEWEB)

    Verstraete, Frans, E-mail: Frans.Verstraete@ec.europa.eu

    2013-08-01

    Directive 2002/32/EC of 7 May 2002 of the European Parliament and of the Council on undesirable substances in animal feed is the framework for the EU action on undesirable substances in feed. This framework Directive provides: ⁎that products intended for animal feed may enter for use in the Union from third countries, be put into circulation and/or used in the Union only if they are sound, genuine and of merchantable quality and therefore when correctly used do not represent any danger to human health, animal health or to the environment or could adversely affect livestock production. ⁎that in order to protect animal and public health and the environment, maximum levels for specific undesirable substances shall be established where necessary. ⁎for mandatory consultation of a scientific body (EFSA) for all provisions which may have an effect upon public health or animal health or on the environment. ⁎that products intended for animal feed containing levels of an undesirable substance that exceed the established maximum level may not be mixed for dilution purposes with the same, or other, products intended for animal feed and may not be used for the production of compound feed. Based on the provisions and principles laid down in this framework Directive, maximum levels for a whole range of undesirable substances have been established at EU level. During the discussions in view of the adoption of Directive 2002/32/EC, the European Commission made the commitment to review all existing provisions on undesirable substances on the basis of updated scientific risk assessments. Following requests of the European Commission, the Panel on Contaminants in the Food Chain (CONTAM) from the European Food Safety Authority (EFSA) has completed a series of 30 risk assessments undertaken over the last 5 years on undesirable substances in animal feed reviewing the possible risks for animal and human health due to the presence of these substances in animal feed. EU legislation

  9. Assessment of the effects of feed restriction and amino acid supplementation on glucose tolerance in llamas.

    Science.gov (United States)

    Cebra, Christopher K; Tornquist, Susan J; Jester, Rebecca M; Stelletta, Calogero

    2004-07-01

    To assess the effects of prolonged feed deprivation on glucose tolerance, insulin secretion, and lipid homeostasis in llamas. 9 adult female llamas. On each of 2 consecutive days, food was withheld from the llamas for 8 hours. Blood samples were collected before and 5, 15, 30, 45, 60, 120, and 240 minutes after IV injection of dextrose (0.5 g/kg) for determination of plasma insulin and serum glucose, triglyceride, and nonesterified fatty acid concentrations. Between experimental periods, the llamas received supplemental amino acids IV (185 mg/kg in solution). The llamas were then fed a limited diet (grass hay, 0.25% of body weight daily) for 23 days, after which the experimental procedures were repeated. Feed restriction decreased glucose tolerance and had slight effects on insulin secretion in llamas. Basal lipid fractions were higher after feed restriction, but dextrose administration resulted in similar reductions in serum lipid concentrations with and without feed restriction. Insulin secretion was decreased on the second day of each study period, which lessened reduction of serum lipid concentrations but did not affect glucose tolerance. Despite having a comparatively competent pancreatic response, feed-restricted llamas assimilated dextrose via an IV bolus more slowly than did llamas on full rations. However, repeated administration of dextrose reduced insulin secretion and could promote hyperglycemia and fat mobilization. These findings suggested that veterinarians should use alternative methods of supplying energy to camelids with long-term reduced feed intake or consider administering agents to improve the assimilation of glucose.

  10. An overview of the legislation and light microscopy for detection of processed animal proteins in feeds.

    Science.gov (United States)

    Liu, Xian; Han, Lujia; Veys, Pascal; Baeten, Vincent; Jiang, Xunpeng; Dardenne, Pierre

    2011-08-01

    From the first cases of bovine spongiform encephalopathy (BSE) among cattle in the United Kingdom in 1986, the route of infection of BSE is generally believed by means of feeds containing low level of processed animal proteins (PAPs). Therefore, many feed bans and alternative and complementary techniques were resulted for the BSE safeguards in the world. Now the feed bans are expected to develop into a "species to species" ban, which requires the corresponding species-specific identification methods. Currently, banned PAPs can be detected by various methods as light microscopy, polymerase chain reaction, enzyme-linked immunosorbent assay, near infrared spectroscopy, and near infrared microscopy. Light microscopy as described in the recent Commission Regulation EC/152/2009 is the only official method for the detection and characterization of PAPs in feed in the European Union. It is able to detect the presence of constituents of animal origin in feed at the level of 1 g/kg with hardly any false negative. Nevertheless, light microscopy has the limitation of lack of species specificity. This article presents a review of legislations on the use of PAPs in feedstuff, the detection details of animal proteins by light microscopy, and also presents and discusses the analysis procedure and expected development of the technique. Copyright © 2010 Wiley-Liss, Inc.

  11. Dairy cow feeding space requirements assessed in a Y-maze choice test.

    Science.gov (United States)

    Rioja-Lang, F C; Roberts, D J; Healy, S D; Lawrence, A B; Haskell, M J

    2012-07-01

    The effect of proximity to a dominant cow on a low-ranking cow's willingness to feed was assessed using choice tests. The main aim of the experiment was to determine the feeding space allowance at which the majority of subordinate cows would choose to feed on high-palatability food (HPF) next to a dominant cow rather than feeding alone on low-palatability food (LPF). Thirty Holstein-Friesian cows were used in the study. Half of the cows were trained to make an association between a black bin and HPF and a white bin and LPF, and the other half were trained with the opposite combination. Observations of pair-wise aggressive interactions were observed during feeding to determine the relative social status of each cow. From this, dominant and subordinate cows were allocated to experimental pairs. When cows had achieved an HPF preference with an 80% success rate in training, they were presented with choices using a Y-maze test apparatus, in which cows were offered choices between feeding on HPF with a dominant cow and feeding on LPF alone. Four different space allowances were tested at the HPF feeder: 0.3, 0.45, 0.6, and 0.75 m. At the 2 smaller space allowances, cows preferred to feed alone (choices between feeding alone or not for 0.3- and 0.45-m tests were significantly different). For the 2 larger space allowances, cows had no significant preferences (number of choices for feeding alone or with a dominant). Given that low-status cows are willing to sacrifice food quality to avoid close contact with a dominant animal, we suggest that the feeding space allowance should be at least 0.6m per cow whenever possible. However, even when space allowances are large, it is clear that some subordinate cows will still prefer to avoid proximity to dominant individuals. Copyright © 2012 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  12. Efficacy and safety assessment of microbiological feed additive for chicken broilers in tolerance studies

    Directory of Open Access Journals (Sweden)

    Kupryś-Caruk Marta

    2018-03-01

    Full Text Available Introduction: One aim of the study was to evaluate the impact when added to feed of the two potentially probiotic strains of lactic acid bacteria (LAB Lactobacillus plantarum K KKP 593/p and Lactobacillus rhamnosus KKP 825 on production performance, health, and the composition of gut microbiota. The complementary aim was to assess the safety of these strains in broiler rearing.

  13. Destruction of commercial pesticides by cerium redox couple mediated electrochemical oxidation process in continuous feed mode

    International Nuclear Information System (INIS)

    Balaji, Subramanian; Chung, Sang Joon; Ryu, Jae-Yong; Moon, Il Shik

    2009-01-01

    Mediated electrochemical oxidation was carried out for the destruction of commercial pesticide formulations using cerium(IV) in nitric acid as the mediator electrolyte solution in a bench scale set up. The mediator oxidant was regenerated in situ using an electrochemical cell. The real application of this sustainable process for toxic organic pollutant destruction lies in its ability for long term continuous operation with continuous organic feeding and oxidant regeneration with feed water removal. In this report we present the results of fully integrated MEO system. The task of operating the continuous feed MEO system for a long time was made possible by continuously removing the feed water using an evaporator set up. The rate of Ce(IV) regeneration in the electrochemical cell and the consumption for the pesticide destruction was matched based on carbon content of the pesticides. It was found that under the optimized experimental conditions for Ce(III) oxidation, organic addition and water removal destruction efficiency of ca. 99% was obtained for all pesticides studied. It was observed that the Ce(IV) concentration was maintained nearly the same throughout the experiment. The stable operation for 6 h proved that the process can be used for real applications and for possible scale up for the destruction of larger volumes of toxic organic wastes.

  14. Process Waste Assessment - Paint Shop

    International Nuclear Information System (INIS)

    Phillips, N.M.

    1993-06-01

    This Process Waste Assessment was conducted to evaluate hazardous wastes generated in the Paint Shop, Building 913, Room 130. Special attention is given to waste streams generated by the spray painting process because it requires a number of steps for preparing, priming, and painting an object. Also, the spray paint booth covers the largest area in R-130. The largest and most costly waste stream to dispose of is open-quote Paint Shop wasteclose quotes -- a combination of paint cans, rags, sticks, filters, and paper containers. These items are compacted in 55-gallon drums and disposed of as solid hazardous waste. Recommendations are made for minimizing waste in the Paint Shop. Paint Shop personnel are very aware of the need to minimize hazardous wastes and are continuously looking for opportunities to do so

  15. Effect of feeding strategy on environmental impacts of pig fattening in different contexts of production: evaluation through life cycle assessment.

    Science.gov (United States)

    Monteiro, A N T R; Garcia-Launay, F; Brossard, L; Wilfart, A; Dourmad, J-Y

    2016-11-01

    Life cycle assessment (LCA) has been used in many studies to evaluate the effect of feeding strategy on the environmental impact of pig production. However, because most studies have been conducted in European conditions, the question of possible interactions with the context of production is still under debate. The objective of this study was to evaluate these effects in 2 contrasted geographic contexts of production, South America (Brazil) and Europe (France). The LCA considered the process of pig fattening, including production and transport of feed ingredients and feed, raising of fattening pigs, and manure storage, transport, and spreading. Impacts were calculated at the farm gate, and the functional unit considered was 1 kg of BW gain over the fattening period. The performances of pigs were simulated for each scenario using the InraPorc population model (2,000 pigs per scenario considering between-animal variability). The LCA calculations were performed for each pig according to its own performance and excretion, and the results were subjected to variance analysis. The results indicate that for some impacts there are clear interactions between the effects of the feeding program, the origin of soybean, and the location of production. For climate change, interest in phase feeding and incorporation of crystalline AA (CAA) is limited and even counterproductive in Brazil with soybeans from the South (without deforestation), whereas they appear to be efficient strategies with soybeans from the Center West (with deforestation), especially in France. Rather similar effects, as those for climate change, were observed for cumulative energy demand. Conversely, potential eutrophication and acidification impacts were reduced by phase feeding and CAA addition in a rather similar way in all situations. Individual daily feeding, the only strategy that took into account between-animal variability, was the most effective approach for reducing the life cycle impact of pig

  16. Validation of an instrument to assess toddler feeding practices of Latino mothers.

    Science.gov (United States)

    Chaidez, Virginia; Kaiser, Lucia L

    2011-08-01

    This paper describes qualitative and quantitative aspects of testing a 34-item Toddler-Feeding Questionnaire (TFQ), designed for use in Latino families, and the associations between feeding practices and toddler dietary outcomes. Qualitative methods included review by an expert panel for content validity and cognitive testing of the tool to assess face validity. Quantitative analyses included use of exploratory factor analysis for construct validity; Pearson's correlations for test-retest reliability; Cronbach's alpha (α) for internal reliability; and multivariate regression for investigating relationships between feeding practices and toddler diet and anthropometry. Interviews were conducted using a convenience sample of 94 Latino mother and toddler dyads obtained largely through the Supplemental Nutrition Program for Women, Infants and Children (WIC). Data collection included household characteristics, self-reported early-infant feeding practices, the toddler's dietary intake, and anthropometric measurements. Factor analysis suggests the TFQ contains three subscales: indulgent; authoritative; and environmental influences. The TFQ demonstrated acceptable reliability for most measures. As hypothesized, indulgent practices in Latino toddlers were associated with increased energy consumption and higher intakes of total fat, saturated fat, and sweetened beverages. This tool may be useful in future research exploring the relationship of toddler feeding practices to nutritional outcomes in Latino families. Copyright © 2011 Elsevier Ltd. All rights reserved.

  17. Adsorption process to recover hydrogen from feed gas mixtures having low hydrogen concentration

    Science.gov (United States)

    Golden, Timothy Christopher; Weist, Jr., Edward Landis; Hufton, Jeffrey Raymond; Novosat, Paul Anthony

    2010-04-13

    A process for selectively separating hydrogen from at least one more strongly adsorbable component in a plurality of adsorption beds to produce a hydrogen-rich product gas from a low hydrogen concentration feed with a high recovery rate. Each of the plurality of adsorption beds subjected to a repetitive cycle. The process comprises an adsorption step for producing the hydrogen-rich product from a feed gas mixture comprising 5% to 50% hydrogen, at least two pressure equalization by void space gas withdrawal steps, a provide purge step resulting in a first pressure decrease, a blowdown step resulting in a second pressure decrease, a purge step, at least two pressure equalization by void space gas introduction steps, and a repressurization step. The second pressure decrease is at least 2 times greater than the first pressure decrease.

  18. Evaluation of alternative chemical additives for high-level waste vitrification feed preparation processing

    International Nuclear Information System (INIS)

    Seymour, R.G.

    1995-01-01

    During the development of the feed processing flowsheet for the Defense Waste Processing Facility (DWPF) at the Savannah River Site (SRS), research had shown that use of formic acid (HCOOH) could accomplish several processing objectives with one chemical addition. These objectives included the decomposition of tetraphenylborate, chemical reduction of mercury, production of acceptable rheological properties in the feed slurry, and controlling the oxidation state of the glass melt pool. However, the DEPF research had not shown that some vitrification slurry feeds had a tendency to evolve hydrogen (H 2 ) and ammonia (NH 3 ) as the result of catalytic decomposition of CHOOH with noble metals (rhodium, ruthenium, palladium) in the feed. Testing conducted at Pacific Northwest Laboratory and later at the Savannah River Technical Center showed that the H 2 and NH 3 could evolve at appreciable rates and quantities. The explosive nature of H 2 and NH 3 (as ammonium nitrate) warranted significant mitigation control and redesign of both facilities. At the time the explosive gas evolution was discovered, the DWPF was already under construction and an immediate hardware fix in tandem with flowsheet changes was necessary. However, the Hanford Waste Vitrification Plant (HWVP) was in the design phase and could afford to take time to investigate flowsheet manipulations that could solve the problem, rather than a hardware fix. Thus, the HWVP began to investigate alternatives to using HCOOH in the vitrification process. This document describes the selection, evaluation criteria, and strategy used to evaluate the performance of the alternative chemical additives to CHOOH. The status of the evaluation is also discussed

  19. A feeding protocol for delivery of agents to assess development in Varroa mites.

    Directory of Open Access Journals (Sweden)

    Ana R Cabrera

    Full Text Available A novel feeding protocol for delivery of bio-active agents to Varroa mites was developed by providing mites with honey bee larva hemolymph supplemented with cultured insect cells and selected materials delivered on a fibrous cotton substrate. Mites were starved, fed on treated hemolymph to deliver selected agents and then returned to bee larvae. Transcript levels of two reference genes, actin and glyceraldehyde 3-phosphate dehydrogenase (GAPDH, as well as for nine selected genes involved in reproductive processes showed that the starvation and feeding protocol periods did not pose a high level of stress to the mites as transcript levels remained comparable between phoretic mites and those completing the protocol. The feeding protocol was used to deliver molecules such as hormone analogs or plasmids. Mites fed with Tebufenozide, an ecdysone analog, had higher transcript levels of shade than untreated or solvent treated mites. In order to extend this feeding protocol, cultured insect cells were incorporated to a final ratio of 1 part cells and 2 parts hemolymph. Although supplementation with Bombyx mori Bm5 cells increased the amount of hemolymph consumed per mite, there was a significant decrease in the percentage of mites that fed and survived. On the other hand, Drosophila melanogaster S2 cells reduced significantly the percentage of mites that fed and survived as well as the amount of hemolymph consumed. The feeding protocol provides a dynamic platform with which to challenge the Varroa mite to establish efficacy of control agents for this devastating honey bee pest.

  20. Study on upgrading of oil palm wastes to animal feeds by radiation and fermentation processing

    International Nuclear Information System (INIS)

    Kume, Tamikazu; Matsuhashi, Shinpei; Ito, Hitoshi

    1998-03-01

    Upgrading of oil palm empty fruit bunch (EFB), which is a main by-product of palm oil industry, to animal feeds by radiation pasteurization and fermentation was investigated for recycling the agro-resources and reducing the environmental pollution. The following results were obtained: 1) The necessary dose for pasteurization of EFB contaminated by various microorganisms including aflatoxin producing fungi was determined as 10 kGy. The chemical and biological properties of EFB were changed little by irradiation up to 50 kGy. 2) In the fermentation process, Pleurotus sajor-caju was selected as the most effective fungi and the optimum condition for fermentation was clarified. The process of fermentation in suspension was also established for the liquid seed preparation. 3) The digestibility and nutritional value of fermented products were evaluated as ruminant animal feeds and the mushroom can be produced as by-product. 4) The pilot plant named Sterifeed was built at MINT and a large volume production has been trying for animal feeding test and economical evaluation. It is expected to develop the process for the commercial use in Malaysia and to expand the technique to Asian region through UNDP/RCA/IAEA project. (author)

  1. Study on upgrading of oil palm wastes to animal feeds by radiation and fermentation processing

    Energy Technology Data Exchange (ETDEWEB)

    Kume, Tamikazu; Matsuhashi, Shinpei; Ito, Hitoshi [Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment; and others

    1998-03-01

    Upgrading of oil palm empty fruit bunch (EFB), which is a main by-product of palm oil industry, to animal feeds by radiation pasteurization and fermentation was investigated for recycling the agro-resources and reducing the environmental pollution. The following results were obtained: (1) The necessary dose for pasteurization of EFB contaminated by various microorganisms including aflatoxin producing fungi was determined as 10 kGy. The chemical and biological properties of EFB were changed little by irradiation up to 50 kGy. (2) In the fermentation process, Pleurotus sajor-caju was selected as the most effective fungi and the optimum condition for fermentation was clarified. The process of fermentation in suspension was also established for the liquid seed preparation. (3) The digestibility and nutritional value of fermented products were evaluated as ruminant animal feeds and the mushroom can be produced as by-product. (4) The pilot plant named Sterifeed was built at MINT and a large volume production has been trying for animal feeding test and economical evaluation. It is expected to develop the process for the commercial use in Malaysia and to expand the technique to Asian region through UNDP/RCA/IAEA project. (author)

  2. Significant others, situations and infant feeding behaviour change processes: a serial qualitative interview study.

    Science.gov (United States)

    McInnes, Rhona J; Hoddinott, Pat; Britten, Jane; Darwent, Kirsty; Craig, Leone C A

    2013-05-16

    Exclusive breastfeeding until six months followed by the introduction of solids and continued breastfeeding is recommended by the World Health Organisation. The dominant approach to achieving this has been to educate and support women to start and continue breastfeeding rather than understanding behaviour change processes from a broader perspective. Serial qualitative interviews examined the influences of significant others on women's feeding behaviour. Thirty-six women and 37 nominated significant others participated in 220 interviews, conducted approximately four weekly from late pregnancy to six months after birth. Responses to summative structured questions at the end of each interview asking about significant influences on feeding decisions were compared and contrasted with formative semi-structured data within and between cases. Analysis focused on pivotal points where behaviour changed from exclusive breastfeeding to introducing formula, stopping breastfeeding or introducing solids. This enabled us to identify processes that decelerate or accelerate behaviour change and understand resolution processes afterwards. The dominant goal motivating behaviour change was family wellbeing, rather than exclusive breastfeeding. Rather than one type of significant other emerging as the key influence, there was a complex interplay between the self-baby dyad, significant others, situations and personal or vicarious feeding history. Following behaviour change women turned to those most likely to confirm or resolve their decisions and maintain their confidence as mothers. Applying ecological models of behaviour would enable health service organisation, practice, policy and research to focus on enhancing family efficacy and wellbeing, improving family-centred communication and increasing opportunities for health professionals to be a constructive influence around pivotal points when feeding behaviour changes. A paradigm shift is recommended away from the dominant approach of

  3. Discrete neurochemical coding of distinguishable motivational processes: insights from nucleus accumbens control of feeding.

    Science.gov (United States)

    Baldo, Brian A; Kelley, Ann E

    2007-04-01

    The idea that nucleus accumbens (Acb) dopamine transmission contributes to the neural mediation of reward, at least in a general sense, has achieved wide acceptance. Nevertheless, debate remains over the precise nature of dopamine's role in reward and even over the nature of reward itself. In the present article, evidence is reviewed from studies of food intake, feeding microstructure, instrumental responding for food reinforcement, and dopamine efflux associated with feeding, which suggests that reward processing in the Acb is best understood as an interaction among distinct processes coded by discrete neurotransmitter systems. In agreement with several theories of Acb dopamine function, it is proposed here that allocation of motor effort in seeking food or food-associated conditioned stimuli can be dissociated from computations relevant to the hedonic evaluation of food during the consummatory act. The former appears to depend upon Acb dopamine transmission and the latter upon striatal opioid peptide release. Moreover, dopamine transmission may play a role in 'stamping in' associations between motor acts and goal attainment and perhaps also neural representations corresponding to rewarding outcomes. Finally, evidence is reviewed that amino acid transmission specifically in the Acb shell acts as a central 'circuit breaker' to flexibly enable or terminate the consummatory act, via descending connections to hypothalamic feeding control systems. The heuristic framework outlined above may help explain why dopamine-compromising manipulations that strongly diminish instrumental goal-seeking behaviors leave consummatory activity relatively unaffected.

  4. Livestock Feed Production from Sago Solid Waste by Pretreatment and Anaerobic Fermentation Process

    Directory of Open Access Journals (Sweden)

    Sumardiono Siswo

    2018-01-01

    Full Text Available Food needs in Indonesia is increasing, including beef. Today, Indonesia has problem to do self-sufficiency in beef. The cause of the problem is the quality of local beef is still lower compared with imported beef due to the quality of livestock feed consumed. To increase the quality of livestock is through pretreatment and fermentation. Source of livestock feed that processed is solid sago waste (Arenga microcarpa, because in Indonesia that is relatively abundant and not used optimally. Chemical pretreatment process for delignification is by using NaOH solution. The purposes of this research are to study NaOH pretreatment, the addition of Trichoderma sp, and fermentation time to improve the quality of sago solid waste as livestock feed through anaerobic fermentation. The variables used are addition or without addition (4%w NaOH solution and Trichoderma sp 1%w and fermentation time (7, 14 and 21 days, with the response of crude fiber and protein. The result of this research shows that the pretreatment with soaking of NaOH solution, addition of Trichoderma sp and 14 days of fermentation was more effective to improve the quality of solid sago waste with decrease of crude fiber from 33.37% to 17.36% and increase of crude protein from 4.00% to 7.96%.

  5. The deep processing of seaweed industrial waste--Influence of several fermentation on seaweed waste of feed

    Science.gov (United States)

    Zhao, Shipeng; Zhang, Shuping

    2018-02-01

    This paper focuses on several factors on the effects of fermented seaweed feed, and obtains the optimal fermentation process through the analysis of nutrients. Through the experiment we can get, Seaweed waste fermented the best feed when adding 1% of microbial agents and 0.5% of corn powder, fermenting for 15 days.

  6. Process for the separation of contaminant or mixture of contaminants from a Ch4-comprising gaseous feed streem

    NARCIS (Netherlands)

    2012-01-01

    The invention provides a process for the separation of a contaminant or mixture of contaminants from a CH4-comprising gaseous feed streem, comprising the subsequent steps of: a) passing a CH4-comprising gaseous feed streem comprising the contaminant or the mixture of contaminants in to and through a

  7. Effect of feeding processed sweet sorghum (Sorghum bicolour (L moench crushed residue based complete ration on growth performance and feeding behavior of murrah buffalo calves

    Directory of Open Access Journals (Sweden)

    Y. Ramana Reddy

    2013-06-01

    Full Text Available Aim: The objective of the present study is to know the effect of feeding processed sweet sorghum (Sorghum bicolour (L moench crushed residue (SSCR based complete ration on growth, feeding behavior and cost of gain in Murrah buffalo calves in order to compare the feeding value of SSCR with sorghum straw (SS and also find out the efficient way of utilization of SSCR in the diets of growing buffalo calves. Materials and Methods: Experimental complete rations were formulated with SSCR and concentrate in 50:50 ratio and processed in to SSCR chopped and concentrate (SSCRC, mash (SSCRM and expander extruder pellets (SSCRP. The control ration was SS based complete feed processed in to mash (SSM. 24 Murrah buffalo calves (Average 137 kg body weight and aged 1 year 2 months were randomly distributed into 4 experimental groups of 6 animals each in a completely randomized design and the experimental rations were offered to 4 groups randomly for a period of 150 days. A 7 day digestion trial was conducted at the end of 150 day growth trial to find out the nutrient digestibility of experimental rations. Eating and ruminating activities were noted every 5 minutes, and each activity was assumed to persist for the entire 5 minutes. Sorting behavior in the calves was observed physically at the time of feeding. The cost of the rations was calculated on the basis of processing cost and the prevailing market prices of the feed ingredients. Results: The DM intake (g/d, digestibilities of DM, organic matter, crude protein and nitrogen free extract and nitrogen (N balance were higher (P<0.05 in buffalo calves fed SSCRP ration but, comparable among SSCRC, SSCRM and SSM rations. Higher (P<0.01 average daily gain (g, lower feed conversion ratio (FCR was observed in calves fed SSCRP ration, while comparable among SSCRC, SSCRM and SSM rations. Eating, rumination and total chewing time (minutes/d,minutes/kg DMI and minutes/kg NDFI and number of chews for eating, rumination

  8. Metabolic assessment and enteral tube feeding usage in children with acute neurological diseases

    Directory of Open Access Journals (Sweden)

    Heitor Pons Leite

    Full Text Available OBJECTIVE: To report on acquired experience of metabolic support for children with acute neurological diseases, emphasizing enteral tube feeding usage and metabolic assessment, and also to recommend policies aimed towards improving its implementation. DESIGN: Retrospective analysis. SETTING: Pediatric Intensive Care Unit of Hospital do Servidor Público Estadual de São Paulo. SUBJECTS: 44 patients consecutively admitted to the Pediatric ICU over a period of 3 years who were given nutrition and metabolic support for at least 72 hours. Head trauma, CNS infections and craniotomy post-operative period following tumor exeresis were the main diagnoses. MEASUREMENTS: Records of protein-energy intake, nutrient supply route, nitrogen balance and length of therapy. RESULTS: From a total of 527 days of therapy, single parenteral nutrition was utilized for 34.3% and single enteral tube feeding for 79.1% of that period. 61.4% of the children were fed exclusively via enteral tube feeding, 9.1% via parenteral and 39.5 % by both routes. The enteral tube feeding was introduced upon admission and transpyloric placement was successful in 90% of the cases. Feeding was started 48 hours after ICU admission. The caloric goal was achieved on the 7th day after admission, and thereafter parenteral nutrition was interrupted. The maximum energy supply was 104.2 ± 23.15 kcal/kg. The median length of therapy was 11 days (range 4-38. None of the patients on tube feeding developed GI tract bleeding, pneumonia or bronchoaspiration episodes and, of the 4 patients who were given exclusive TPN, 2 developed peptic ulcer. The initial urinary urea nitrogen was 7.11 g/m2 and at discharge 6.44 g/m2. The protein supply increased from 1.49 g/kg to 3.65 g/kg (p< 0.01. The nitrogen balance increased from -7.05 to 2.2 g (p< 0.01. CONCLUSIONS: Children with acute neurological diseases are hypercatabolic and have high urinary nitrogen losses. The initial negative nitrogen balance can be

  9. An Assessment of the Breastfeeding Practices and Infant Feeding Pattern among Mothers in Mauritius

    Directory of Open Access Journals (Sweden)

    Ashmika Motee

    2013-01-01

    Full Text Available Proper breastfeeding practices are effective ways for reducing childhood morbidity and mortality. While many mothers understand the importance of breastfeeding, others are less knowledgeable on the benefits of breastfeeding and weaning. The aim in here is to assess breastfeeding pattern, infant formula feeding pattern, and weaning introduction in Mauritius and to investigate the factors that influence infant nutrition. 500 mothers were interviewed using a questionnaire which was designed to elicit information on infant feeding practices. Statistical analyses were done using SPSS (version 13.0, whereby chi-square tests were used to evaluate relationships between different selected variables. The prevalence of breastfeeding practice in Mauritius has risen from 72% in 1991 to 93.4% as found in this study, while only 17.9% breastfed their children exclusively for the first 6 months, and the mean duration of EBF (exclusive breastfeeding is 2.10 months. Complementary feeding was more commonly initiated around 4–6 months (75.2%. Despite the fact that 60.6% of mothers initiate breastfeeding and 26.1% of mothers are found to breastfeed up to 2 years, the practice of EBF for the first 6 months is low (17.9%. Factors found to influence infant feeding practices are type of delivery, parity, alcohol consumption, occupation, education, and breast problems.

  10. Performing in-feed type centerless grinding process on a surface grinder

    International Nuclear Information System (INIS)

    Xu, W.; Wu, Y.; Sato, T.; Lin, W.

    2011-01-01

    In our previous study, a new centerless grinding method using surface grinder was proposed. In this method, centerless grinding operations are performed by installing a compact centerless grinding unit, consisting mainly of an ultrasonic elliptic-vibration shoe, a blade and their respective holders, on the worktable of a surface grinder. During grinding, the cylindrical workpiece is held on the ultrasonic shoe and the blade, and its rotational motion is controlled by the elliptic motion of the shoe end-face. An actual unit had been produced and its performance in tangential-feed type centerless grinding using a surface grinder had been confirmed in the previous workd. In this paper, the performance of the grinding unit in in-feed centerless grinding operation was confirmed, and the effects of the main process parameter, i.e., eccentric angle, on the workpiece roundness was investigated experimentally. The obtained results showed that: (1) the centerless grinding unit performed well in in-feed type centerless grinding; (2) the eccentric angle affects roundness significantly, and its optimal angle is 6 deg.; (3) the workpiece roundness can be further improved by varying the eccentric angle during grinding, and the final roundness reached 0.65 μm after grinding as the eccentric angle varied from 9 deg. to 6 deg. and to 3 deg.

  11. A Feeding Strategy in Inner L-Shape Ring Hot Rolling Process

    Directory of Open Access Journals (Sweden)

    Wen Meng

    2017-01-01

    Full Text Available In order to make the inner L-shape ring polling process with a closed die structure (ILRRCDS on the top and bottom of the driven roll stable, at first, this paper established the mathematical model for ILRRCDS. Then, the plastic penetration and biting-in conditions for ILRRCDS were deduced based on plain ring rolling theory. Moreover, a feeding strategy that can realize a constant growth of the ring’s outer radius was proposed and the reasonable value ranges of the feed rate of the mandrel were determined. The numerical simulation model for ILRRCDS is established based on ABAQUS software. Finally, the equivalent plastic strain (PEEQ and temperature distributions of rolled ring were obtained. The results indicated that the proposed feeding strategy can realize a stable ILRRCDS. At the end of ILRRCDS, the PEEQ at the inner radius surface of the ring is maximum, the PEEQ at the outer radius surface of the ring takes the second place, and the PEEQ at the middle part of ring is minimum. With the increase of rolling time, the higher temperature zone of the rolled ring gradually moves from the center part of the ring to the “inner corner zone” of the ring.

  12. Recent advances in the risk assessment of melamine and cyanuric acid in animal feed

    Energy Technology Data Exchange (ETDEWEB)

    Dorne, Jean Lou, E-mail: jean-lou.dorne@efsa.europa.eu [Unit on Contaminants, European Food Safety Authority, Largo N. Palli 5/A, 43121 Parma (Italy); Doerge, Daniel R. [NCTR, Division of Biochemical Toxicology, National Center for Toxicological Research, U.S. Food and Drug Administration, 3900 NCTR Road, Jefferson, AR 72079 (United States); Vandenbroeck, Marc [Unit on Contaminants, European Food Safety Authority, Largo N. Palli 5/A, 43121 Parma (Italy); Fink-Gremmels, Johanna [University of Utrecht (Netherlands); Mennes, Wim [RIVM, Bilthoven (Netherlands); Knutsen, Helle K. [Norwegian Institute of Public Health, Oslo (Norway); Vernazza, Francesco [Dietary and Chemical Monitoring, European Food Safety Authority, Largo N. Palli 5/A, 43121 Parma (Italy); Castle, Laurence [FERA, York (United Kingdom); Edler, Lutz [German Cancer Research Center, Heidelberg (Germany); Benford, Diane [Food Standard Agency, London (United Kingdom)

    2013-08-01

    Melamine can be present at low levels in food and feed mostly from its legal use as a food contact material in laminates and plastics, as a trace contaminant in nitrogen supplements used in animal feeds, and as a metabolite of the pesticide cyromazine. The mechanism of toxicity of melamine involves dose-dependent formation of crystals with either endogenous uric acid or a structural analogue of melamine, cyanuric acid, in renal tubules resulting in potential acute kidney failure. Co-exposure to melamine and cyanuric acid in livestock, fish, pets and laboratory animals shows higher toxicity compared with melamine or cyanuric acid alone. Evidence for crystal formation between melamine and other structural analogs i.e. ammelide and ammeline is limited. Illegal pet food adulterations with melamine and cyanuric acid and adulteration of milk with melamine resulted in melamine–cyanuric acid crystals, kidney damage and deaths of cats and dogs and melamine–uric acid stones, hospitalisation and deaths of children in China respectively. Following these incidents, the tolerable daily intake for melamine was re-evaluated by the U.S. Food and Drug Administration, the World Health Organisation, and the Scientific Panel on Contaminants in the Food Chain of the European Food Safety Authority (EFSA). This review provides an overview of toxicology, the adulteration incidents and risk assessments for melamine and its structural analogues. Particular focus is given to the recent EFSA risk assessment addressing impacts on animal and human health of background levels of melamine and structural analogues in animal feed. Recent research and future directions are discussed. - Highlights: ► Melamine in food and feed. ► Forms crystals in kidney with uric acid or cyanuric acid. ► Toxicity higher with cyanuric acid. ► Recent EFSA risk assessment. ► Animal and human health.

  13. Recent advances in the risk assessment of melamine and cyanuric acid in animal feed

    International Nuclear Information System (INIS)

    Dorne, Jean Lou; Doerge, Daniel R.; Vandenbroeck, Marc; Fink-Gremmels, Johanna; Mennes, Wim; Knutsen, Helle K.; Vernazza, Francesco; Castle, Laurence; Edler, Lutz; Benford, Diane

    2013-01-01

    Melamine can be present at low levels in food and feed mostly from its legal use as a food contact material in laminates and plastics, as a trace contaminant in nitrogen supplements used in animal feeds, and as a metabolite of the pesticide cyromazine. The mechanism of toxicity of melamine involves dose-dependent formation of crystals with either endogenous uric acid or a structural analogue of melamine, cyanuric acid, in renal tubules resulting in potential acute kidney failure. Co-exposure to melamine and cyanuric acid in livestock, fish, pets and laboratory animals shows higher toxicity compared with melamine or cyanuric acid alone. Evidence for crystal formation between melamine and other structural analogs i.e. ammelide and ammeline is limited. Illegal pet food adulterations with melamine and cyanuric acid and adulteration of milk with melamine resulted in melamine–cyanuric acid crystals, kidney damage and deaths of cats and dogs and melamine–uric acid stones, hospitalisation and deaths of children in China respectively. Following these incidents, the tolerable daily intake for melamine was re-evaluated by the U.S. Food and Drug Administration, the World Health Organisation, and the Scientific Panel on Contaminants in the Food Chain of the European Food Safety Authority (EFSA). This review provides an overview of toxicology, the adulteration incidents and risk assessments for melamine and its structural analogues. Particular focus is given to the recent EFSA risk assessment addressing impacts on animal and human health of background levels of melamine and structural analogues in animal feed. Recent research and future directions are discussed. - Highlights: ► Melamine in food and feed. ► Forms crystals in kidney with uric acid or cyanuric acid. ► Toxicity higher with cyanuric acid. ► Recent EFSA risk assessment. ► Animal and human health

  14. Construction of quality-assured infant feeding process of care data repositories: Construction of the perinatal repository (Part 2).

    Science.gov (United States)

    García-de-León-Chocano, Ricardo; Muñoz-Soler, Verónica; Sáez, Carlos; García-de-León-González, Ricardo; García-Gómez, Juan M

    2016-04-01

    This is the second in a series of two papers regarding the construction of data quality (DQ) assured repositories, based on population data from Electronic Health Records (EHR), for the reuse of information on infant feeding from birth until the age of two. This second paper describes the application of the computational process of constructing the first quality-assured repository for the reuse of information on infant feeding in the perinatal period, with the aim of studying relevant questions from the Baby Friendly Hospital Initiative (BFHI) and monitoring its deployment in our hospital. The construction of the repository was carried out using 13 semi-automated procedures to assess, recover or discard clinical data. The initial information consisted of perinatal forms from EHR related to 2048 births (Facts of Study, FoS) between 2009 and 2011, with a total of 433,308 observations of 223 variables. DQ was measured before and after the procedures using metrics related to eight quality dimensions: predictive value, correctness, duplication, consistency, completeness, contextualization, temporal-stability, and spatial-stability. Once the predictive variables were selected and DQ was assured, the final repository consisted of 1925 births, 107,529 observations and 73 quality-assured variables. The amount of discarded observations mainly corresponds to observations of non-predictive variables (52.90%) and the impact of the de-duplication process (20.58%) with respect to the total input data. Seven out of thirteen procedures achieved 100% of valid births, observations and variables. Moreover, 89% of births and ~98% of observations were consistent according to the experts׳ criteria. A multidisciplinary approach along with the quantification of DQ has allowed us to construct the first repository about infant feeding in the perinatal period based on EHR population data. Copyright © 2016 Elsevier Ltd. All rights reserved.

  15. Assessment of complementary feeding of Canadian infants: effects on microbiome & oxidative stress, a randomized controlled trial.

    Science.gov (United States)

    Qasem, Wafaa; Azad, Meghan B; Hossain, Zakir; Azad, Elnaz; Jorgensen, Sarah; Castillo San Juan, Sandra; Cai, Chenxi; Khafipour, Ehsan; Beta, Trust; Roberts, L Jackson; Friel, James

    2017-02-14

    The World Health Organization recommends exclusive breastfeeding until 6 months followed by introduction of iron-rich complementary foods (CFs). The aim of this study was to determine the impact of different iron-rich CFs on infant gut inflammation and microbiota. Eighty-seven exclusively breastfed infants were randomly assigned to receive one of the following as their first CF: iron-fortified cereal (Cer), iron-fortified cereal with fruit (Cer + Fr), or meat (M). Urine and stool samples were collected to assess reactive oxygen species (ROS) generation, gut microbiota and inflammation. Fecal iron differed across feeding groups (p microbiota richness increased after introduction of M or Cer + Fr. Regardless of feeding group, Coriobacteriaceae were positively correlated with ROS and Staphylococcaceae were negatively correlated with calprotectin. Choice of first CF may influence gut inflammation and microbiota, potentially due to variations in iron absorption from different foods. Further research is warranted to fully characterize these associations and to establish implications for infant health. This study was registered in the ClinicalTrial.gov registry (Identifier No. NCT01790542 ). This study was registered in the ClinicalTrial.gov registry under the name "Assessment of Complementary Feeding of Canadian Infants" (Identifier No. NCT01790542 ) February 6, 2013.

  16. How Do Infant Feeding Apps in China Measure Up? A Content Quality Assessment.

    Science.gov (United States)

    Zhao, Jing; Freeman, Becky; Li, Mu

    2017-12-06

    Globally, with the popularization of mobile phones, the number of health-related mobile phone apps has skyrocketed to 259,000 in 2016. In the digital era, people are accessing health information through their fingertips. In China, there are several apps that claim to provide infant feeding and nutrition guidance. However, the quality of information in those apps has not been extensively assessed. We aimed to assess the quality of Chinese infant feeding apps using comprehensive quality assessment criteria and to explore Chinese mothers' perceptions on apps' quality and usability. We searched for free-to-download Chinese infant feeding apps in the iTunes and Android App Stores. We conducted a comprehensive assessment of the accountability, scientific basis, accuracy of information relevant to infant feeding, advertising policy, and functionality and carried out a preliminary screening of infant formula advertisements in the apps. In addition, we also conducted exploratory qualitative research through semistructured interviews with Chinese mothers in Shanghai to elicit their views about the quality of apps. A total of 4925 apps were screened, and 26 apps that met the selection criteria were evaluated. All 26 apps were developed by commercial entities, and the majority of them were rated poorly. The highest total score was 62.2 (out of approximately 100) and the lowest was 16.7. In the four quality domains assessed, none of them fulfilled all the accountability criteria. Three out of 26 apps provided information covering the three practices from the World Health Organization's infant feeding recommendations. Only one app described its advertising policy in its terms of usage. The most common app functionality was a built-in social forum (19/26). Provision of a website link was the least common functionality (2/26). A total of 20 out of 26 apps promoted infant formula banner advertisements on their homepages. In addition, 12 apps included both e-commerce stores and

  17. How Do Infant Feeding Apps in China Measure Up? A Content Quality Assessment

    Science.gov (United States)

    Freeman, Becky; Li, Mu

    2017-01-01

    Background Globally, with the popularization of mobile phones, the number of health-related mobile phone apps has skyrocketed to 259,000 in 2016. In the digital era, people are accessing health information through their fingertips. In China, there are several apps that claim to provide infant feeding and nutrition guidance. However, the quality of information in those apps has not been extensively assessed. Objective We aimed to assess the quality of Chinese infant feeding apps using comprehensive quality assessment criteria and to explore Chinese mothers’ perceptions on apps’ quality and usability. Methods We searched for free-to-download Chinese infant feeding apps in the iTunes and Android App Stores. We conducted a comprehensive assessment of the accountability, scientific basis, accuracy of information relevant to infant feeding, advertising policy, and functionality and carried out a preliminary screening of infant formula advertisements in the apps. In addition, we also conducted exploratory qualitative research through semistructured interviews with Chinese mothers in Shanghai to elicit their views about the quality of apps. Results A total of 4925 apps were screened, and 26 apps that met the selection criteria were evaluated. All 26 apps were developed by commercial entities, and the majority of them were rated poorly. The highest total score was 62.2 (out of approximately 100) and the lowest was 16.7. In the four quality domains assessed, none of them fulfilled all the accountability criteria. Three out of 26 apps provided information covering the three practices from the World Health Organization’s infant feeding recommendations. Only one app described its advertising policy in its terms of usage. The most common app functionality was a built-in social forum (19/26). Provision of a website link was the least common functionality (2/26). A total of 20 out of 26 apps promoted infant formula banner advertisements on their homepages. In addition, 12

  18. Peptidomic Approach to Developing ELISAs for the Determination of Bovine and Porcine Processed Animal Proteins in Feed for Farmed Animals.

    Science.gov (United States)

    Huet, Anne-Catherine; Charlier, Caroline; Deckers, Elise; Marbaix, Hélène; Raes, Martine; Mauro, Sergio; Delahaut, Philippe; Gillard, Nathalie

    2016-11-30

    The European Commission (EC) wants to reintroduce nonruminant processed animal proteins (PAPs) safely into the feed chain. This would involve replacing the current ban in feed with a species-to-species ban which, in the case of nonruminants, would only prohibit feeding them with proteins from the same species. To enforce such a provision, there is an urgent need for species-specific methods for detecting PAPs from several species in animal feed and in PAPs from other species. Currently, optical microscopy and the polymerase chain reaction are the officially accepted methods, but they have limitations, and alternative methods are needed. We have developed immunoassays using antibodies raised against targets which are not influenced by high temperature and pressure. These targets were identified in a previous study based on an experimental approach. One optimized competitive ELISA detects bovine PAPs at 2% in plant-derived feed. The detection capability demonstrated on blind samples shows a good correlation with mass spectrometry results.

  19. Product creativity assessment of innovations: considering the creative process

    DEFF Research Database (Denmark)

    Valgeirsdóttir, Dagný; Onarheim, Balder; Gabrielsen, Gorm

    2015-01-01

    in creativity research, while the role of consumer’s knowledge of the creative process behind the product is fairly unexplored. In this paper, we present an empirical study investigating whether providing information about a complex development process could amplify consumer’s perception of product creativity......Creativity is a critical component that feeds into all stages of innovation and design processes by promoting inspiration, ideation, and implementation of ideas, revealing the need for thorough research to support design creativity. Assessment of product creativity is a reoccurring topic....... Does storytelling about the process contribute to amplifying creativity ratings? What form of storytelling is needed to make an impact? Results from 134 respondents showed a small but not significant amplifying effect from the additional process information; however, an important learning can be drawn...

  20. Changing Feeding Regimes To Demonstrate Flexible Biogas Production: Effects on Process Performance, Microbial Community Structure, and Methanogenesis Pathways

    Science.gov (United States)

    Mulat, Daniel Girma; Jacobi, H. Fabian; Feilberg, Anders; Adamsen, Anders Peter S.; Richnow, Hans-Hermann

    2015-01-01

    Flexible biogas production that adapts biogas output to energy demand can be regulated by changing feeding regimes. In this study, the effect of changes in feeding intervals on process performance, microbial community structure, and the methanogenesis pathway was investigated. Three different feeding regimes (once daily, every second day, and every 2 h) at the same organic loading rate were studied in continuously stirred tank reactors treating distiller's dried grains with solubles. A larger amount of biogas was produced after feeding in the reactors fed less frequently (once per day and every second day), whereas the amount remained constant in the reactor fed more frequently (every 2 h), indicating the suitability of the former for the flexible production of biogas. Compared to the conventional more frequent feeding regimes, a methane yield that was up to 14% higher and an improved stability of the process against organic overloading were achieved by employing less frequent feeding regimes. The community structures of bacteria and methanogenic archaea were monitored by terminal restriction fragment length polymorphism (T-RFLP) analysis of 16S rRNA and mcrA genes, respectively. The results showed that the composition of the bacterial community varied under the different feeding regimes, and the observed T-RFLP patterns were best explained by the differences in the total ammonia nitrogen concentrations, H2 levels, and pH values. However, the methanogenic community remained stable under all feeding regimes, with the dominance of the Methanosarcina genus followed by that of the Methanobacterium genus. Stable isotope analysis showed that the average amount of methane produced during each feeding event by acetoclastic and hydrogenotrophic methanogenesis was not influenced by the three different feeding regimes. PMID:26497462

  1. Changing Feeding Regimes To Demonstrate Flexible Biogas Production: Effects on Process Performance, Microbial Community Structure, and Methanogenesis Pathways.

    Science.gov (United States)

    Mulat, Daniel Girma; Jacobi, H Fabian; Feilberg, Anders; Adamsen, Anders Peter S; Richnow, Hans-Hermann; Nikolausz, Marcell

    2016-01-15

    Flexible biogas production that adapts biogas output to energy demand can be regulated by changing feeding regimes. In this study, the effect of changes in feeding intervals on process performance, microbial community structure, and the methanogenesis pathway was investigated. Three different feeding regimes (once daily, every second day, and every 2 h) at the same organic loading rate were studied in continuously stirred tank reactors treating distiller's dried grains with solubles. A larger amount of biogas was produced after feeding in the reactors fed less frequently (once per day and every second day), whereas the amount remained constant in the reactor fed more frequently (every 2 h), indicating the suitability of the former for the flexible production of biogas. Compared to the conventional more frequent feeding regimes, a methane yield that was up to 14% higher and an improved stability of the process against organic overloading were achieved by employing less frequent feeding regimes. The community structures of bacteria and methanogenic archaea were monitored by terminal restriction fragment length polymorphism (T-RFLP) analysis of 16S rRNA and mcrA genes, respectively. The results showed that the composition of the bacterial community varied under the different feeding regimes, and the observed T-RFLP patterns were best explained by the differences in the total ammonia nitrogen concentrations, H2 levels, and pH values. However, the methanogenic community remained stable under all feeding regimes, with the dominance of the Methanosarcina genus followed by that of the Methanobacterium genus. Stable isotope analysis showed that the average amount of methane produced during each feeding event by acetoclastic and hydrogenotrophic methanogenesis was not influenced by the three different feeding regimes. Copyright © 2016, American Society for Microbiology. All Rights Reserved.

  2. Real time monitoring of powder blend bulk density for coupled feed-forward/feed-back control of a continuous direct compaction tablet manufacturing process.

    Science.gov (United States)

    Singh, Ravendra; Román-Ospino, Andrés D; Romañach, Rodolfo J; Ierapetritou, Marianthi; Ramachandran, Rohit

    2015-11-10

    The pharmaceutical industry is strictly regulated, where precise and accurate control of the end product quality is necessary to ensure the effectiveness of the drug products. For such control, the process and raw materials variability ideally need to be fed-forward in real time into an automatic control system so that a proactive action can be taken before it can affect the end product quality. Variations in raw material properties (e.g., particle size), feeder hopper level, amount of lubrication, milling and blending action, applied shear in different processing stages can affect the blend density significantly and thereby tablet weight, hardness and dissolution. Therefore, real time monitoring of powder bulk density variability and its incorporation into the automatic control system so that its effect can be mitigated proactively and efficiently is highly desired. However, real time monitoring of powder bulk density is still a challenging task because of different level of complexities. In this work, powder bulk density which has a significant effect on the critical quality attributes (CQA's) has been monitored in real time in a pilot-plant facility, using a NIR sensor. The sensitivity of the powder bulk density on critical process parameters (CPP's) and CQA's has been analyzed and thereby feed-forward controller has been designed. The measured signal can be used for feed-forward control so that the corrective actions on the density variations can be taken before they can influence the product quality. The coupled feed-forward/feed-back control system demonstrates improved control performance and improvements in the final product quality in the presence of process and raw material variations. Copyright © 2015 Elsevier B.V. All rights reserved.

  3. Water reclamation and value-added animal feed from corn-ethanol stillage by fungal processing.

    Science.gov (United States)

    Rasmussen, M L; Khanal, S K; Pometto, A L; van Leeuwen, J Hans

    2014-01-01

    Rhizopus oligosporus was cultivated on thin stillage from a dry-grind corn ethanol plant. The aim of the research was to develop a process to replace the current energy-intensive flash evaporation and make use of this nutrient-rich stream to create a new co-product in the form of protein-rich biomass. Batch experiments in 5- and 50-L stirred bioreactors showed prolific fungal growth under non-sterile conditions. COD, suspended solids, glycerol, and organic acids removals, critical for in-plant water reuse, reached ca. 80%, 98%, 100% and 100%, respectively, within 5 d of fungal inoculation, enabling effluent recycle as process water. R. oligosporus contains 2% lysine, good levels of other essential amino acids, and 43% crude protein - a highly nutritious livestock feed. Avoiding water evaporation from thin stillage would furthermore save substantial energy inputs on corn ethanol plants. Copyright © 2013 Elsevier Ltd. All rights reserved.

  4. Modeling of an industrial process of pleuromutilin fermentation using feed-forward neural networks

    Directory of Open Access Journals (Sweden)

    L. Khaouane

    2013-03-01

    Full Text Available This work investigates the use of artificial neural networks in modeling an industrial fermentation process of Pleuromutilin produced by Pleurotus mutilus in a fed-batch mode. Three feed-forward neural network models characterized by a similar structure (five neurons in the input layer, one hidden layer and one neuron in the output layer are constructed and optimized with the aim to predict the evolution of three main bioprocess variables: biomass, substrate and product. Results show a good fit between the predicted and experimental values for each model (the root mean squared errors were 0.4624% - 0.1234 g/L and 0.0016 mg/g respectively. Furthermore, the comparison between the optimized models and the unstructured kinetic models in terms of simulation results shows that neural network models gave more significant results. These results encourage further studies to integrate the mathematical formulae extracted from these models into an industrial control loop of the process.

  5. Environment, safety and health compliance assessment, Feed Materials Production Center, Fernald, Ohio

    Energy Technology Data Exchange (ETDEWEB)

    1989-09-01

    The Secretary of Energy established independent Tiger Teams to conduct environment, safety, and health (ES H) compliance assessments at US Department of Energy (DOE) facilities. This report presents the assessment of the Feed Materials Production Center (FMPC) at Fernald, Ohio. The purpose of the assessment at FMPC is to provide the Secretary with information regarding current ES H compliance status, specific ES H noncompliance items, evaluation of the adequacy of the ES H organizations and resources (DOE and contractor), and root causes for noncompliance items. Areas reviewed included performance under Federal, state, and local agreements and permits; compliance with Federal, state and DOE orders and requirements; adequacy of operations and other site activities, such as training, procedures, document control, quality assurance, and emergency preparedness; and management and staff, including resources, planning, and interactions with outside agencies.

  6. A quantitative study of methanol/sorbitol co-feeding process of a Pichia pastoris Mut⁺/pAOX1-lacZ strain.

    Science.gov (United States)

    Niu, Hongxing; Jost, Laurent; Pirlot, Nathalie; Sassi, Hosni; Daukandt, Marc; Rodriguez, Christian; Fickers, Patrick

    2013-04-08

    One of the main challenges for heterologous protein production by the methylotrophic yeast Pichia pastoris at large-scale is related to its high oxygen demand. A promising solution is a co-feeding strategy based on a methanol/sorbitol mixture during the induction phase. Nonetheless, a deep understanding of the cellular physiology and the regulation of the AOX1 promoter, used to govern heterologous protein production, during this co-feeding strategy is still scarce. Transient continuous cultures with a dilution rate of 0.023 h(-1) at 25°C were performed to quantitatively assess the benefits of a methanol/sorbitol co-feeding process with a Mut+ strain in which the pAOX1-lacZ construct served as a reporter gene. Cell growth and metabolism, including O2 consumption together with CO2 and heat production were analyzed with regard to a linear change of methanol fraction in the mixed feeding media. In addition, the regulation of the promoter AOX1 was investigated by means of β-galactosidase measurements. Our results demonstrated that the cell-specific oxygen consumption (qO2) could be reduced by decreasing the methanol fraction in the feeding media. More interestingly, maximal β-galactosidase cell-specific activity (>7500 Miller unit) and thus, optimal pAOX1 induction, was achieved and maintained in the range of 0.45 ~ 0.75 C-mol/C-mol of methanol fraction. In addition, the qO2 was reduced by 30% at most in those conditions. Based on a simplified metabolic network, metabolic flux analysis (MFA) was performed to quantify intracellular metabolic flux distributions during the transient continuous cultures, which further shed light on the advantages of methanol/sorbitol co-feeding process. Finally, our observations were further validated in fed-batch cultures. This study brings quantitative insight into the co-feeding process, which provides valuable data for the control of methanol/sorbitol co-feeding, aiming at enhancing biomass and heterologous protein productivities

  7. A quantitative study of methanol/sorbitol co-feeding process of a Pichia pastoris Mut+/pAOX1-lacZ strain

    Science.gov (United States)

    2013-01-01

    Background One of the main challenges for heterologous protein production by the methylotrophic yeast Pichia pastoris at large-scale is related to its high oxygen demand. A promising solution is a co-feeding strategy based on a methanol/sorbitol mixture during the induction phase. Nonetheless, a deep understanding of the cellular physiology and the regulation of the AOX1 promoter, used to govern heterologous protein production, during this co-feeding strategy is still scarce. Results Transient continuous cultures with a dilution rate of 0.023 h-1 at 25°C were performed to quantitatively assess the benefits of a methanol/sorbitol co-feeding process with a Mut+ strain in which the pAOX1-lacZ construct served as a reporter gene. Cell growth and metabolism, including O2 consumption together with CO2 and heat production were analyzed with regard to a linear change of methanol fraction in the mixed feeding media. In addition, the regulation of the promoter AOX1 was investigated by means of β-galactosidase measurements. Our results demonstrated that the cell-specific oxygen consumption (qO2) could be reduced by decreasing the methanol fraction in the feeding media. More interestingly, maximal β-galactosidase cell-specific activity (>7500 Miller unit) and thus, optimal pAOX1 induction, was achieved and maintained in the range of 0.45 ~ 0.75 C-mol/C-mol of methanol fraction. In addition, the qO2 was reduced by 30% at most in those conditions. Based on a simplified metabolic network, metabolic flux analysis (MFA) was performed to quantify intracellular metabolic flux distributions during the transient continuous cultures, which further shed light on the advantages of methanol/sorbitol co-feeding process. Finally, our observations were further validated in fed-batch cultures. Conclusion This study brings quantitative insight into the co-feeding process, which provides valuable data for the control of methanol/sorbitol co-feeding, aiming at enhancing biomass and

  8. Process Mining Online Assessment Data

    Science.gov (United States)

    Pechenizkiy, Mykola; Trcka, Nikola; Vasilyeva, Ekaterina; van der Aalst, Wil; De Bra, Paul

    2009-01-01

    Traditional data mining techniques have been extensively applied to find interesting patterns, build descriptive and predictive models from large volumes of data accumulated through the use of different information systems. The results of data mining can be used for getting a better understanding of the underlying educational processes, for…

  9. Assessment of Counselors' Supervision Processes

    Science.gov (United States)

    Ünal, Ali; Sürücü, Abdullah; Yavuz, Mustafa

    2013-01-01

    The aim of this study is to investigate elementary and high school counselors' supervision processes and efficiency of their supervision. The interview method was used as it was thought to be better for realizing the aim of the study. The study group was composed of ten counselors who were chosen through purposeful sampling method. Data were…

  10. Study of an induction brazing process for the instrumentation feed through part

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Jintae; Ahn, Sung Ho; Joung, Chang Young; Kim, Ka Hye; Heo, Sung Ho [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2013-10-15

    In general, brazing is used to seal out the feed through part of thin wires, and several studies in nuclear fields used brazing as a sealing method. However, previous techniques using a manual torch or an induction brazing by blowing Ar gas as a shield gas cannot avoid soot, which is difficult to remove. In addition, because their brazing quality is not uniform, instrumentation cables cannot deliver signals due to damage of excessive heat. In this study, an automatically controlled induction brazing system has been developed including a vacuum chamber to prevent generation of soot. A loop is a facility to carry out irradiation test for nuclear fuels and materials in a research reactor by measuring the irradiation behavior of them in a timely manner. Because flow condition of coolant in a loop should be the same with that of NPPs', highly pressurized (15.5 MPa) and highly heated (300 .deg. C) coolant is circulated through the loop. Therefore, sealing of the pressure boundary is one of the most important processes in fabricating the in-pile test section (IPS). In particular, sensors such as thermocouples, LVDTs and SPNDs are attached in a test rig and deliver signals to the measuring device at the outside of the reactor pool through instrumentation cables, which pass through the pressure boundary of the test rig. Therefore, it needs to seal out the instrumentation feed through part to not leak the coolant.

  11. Relative Bioavailability of Niacin Supplements for Dairy Cows: Effects of Rumen Protection and of Feed Processing

    Directory of Open Access Journals (Sweden)

    Reka Tienken

    2015-12-01

    Full Text Available The present study aimed to examine the effective systemic bioavailability of niacin— with particular focus on its galenic form—and feed processing. Experiment 1 was conducted with 35 dairy cows to investigate the effects of various doses of oral supplemented nicotinic acid (NA either in differing galenic forms (non-rumen protected (nRP vs. rumen protected form (RP on serum niacin concentrations. Experiment 2 was designed as a pharmacokinetic study examining the serum niacin kinetics over 24 h after giving a single oral bolus of 24 g nRP or RP NA admixed in either pelleted or ground concentrate. In both experiments, only the niacin vitamer nicotinamide (NAM was detected. Results of experiment 1 showed that both galenic forms at a dose of 24 g/cow daily elevated NAM concentrations at the beginning of the experiment. Despite a daily supplementation, NAM concentrations decreased continuously towards the end of the experiment which was more steeply in nRP NA (p = 0.03. On experimental day 21, NAM concentrations were higher when feeding RP NA (p = 0.03 and the highest dose (24 g/day and cow (p < 0.01. Results of experiment 2 indicated that nRP and RP were characterized by similar pharmacokinetic profiles resulting in similar areas under the curves as a net result of the kinetic counterbalancing alterations. Pelleting seemed not to influence the relative bioavailability.

  12. Relative Bioavailability of Niacin Supplements for Dairy Cows: Effects of Rumen Protection and of Feed Processing.

    Science.gov (United States)

    Tienken, Reka; Kersten, Susanne; Hüther, Liane; Frahm, Jana; Meyer, Ulrich; Dänicke, Sven

    2015-12-16

    The present study aimed to examine the effective systemic bioavailability of niacin- with particular focus on its galenic form-and feed processing. Experiment 1 was conducted with 35 dairy cows to investigate the effects of various doses of oral supplemented nicotinic acid (NA) either in differing galenic forms (non-rumen protected (nRP) vs. rumen protected form (RP)) on serum niacin concentrations. Experiment 2 was designed as a pharmacokinetic study examining the serum niacin kinetics over 24 h after giving a single oral bolus of 24 g nRP or RP NA admixed in either pelleted or ground concentrate. In both experiments, only the niacin vitamer nicotinamide (NAM) was detected. Results of experiment 1 showed that both galenic forms at a dose of 24 g/cow daily elevated NAM concentrations at the beginning of the experiment. Despite a daily supplementation, NAM concentrations decreased continuously towards the end of the experiment which was more steeply in nRP NA ( p = 0.03). On experimental day 21, NAM concentrations were higher when feeding RP NA ( p = 0.03) and the highest dose (24 g/day and cow) ( p counterbalancing alterations. Pelleting seemed not to influence the relative bioavailability.

  13. Improvement of a feed and bleed process for a 900 MWe NPP using the SIMPACT simulator

    International Nuclear Information System (INIS)

    Pochard, R.; Jedrzejewski, F.; Mazauric, X.; Cartenon, P. Y.

    2000-01-01

    A sensitivity study related to the improvement of a feed and bleed process was carried out with the SIPACT simulator. The scenario analysed here is related to a total loss of feed water on a French 900MW NPP. In a previous study we were looking extensively to the effects of bleeding with the three relief valves and its time of initiation. In the new calculations, limited bleed, by opening only one or two relief valves, was initiated at the minimum of mass and at the time which corresponds to the beginning of the heat transfer degradation in the steam generators. The analysis of the results shows that the in-vessel mass and the safety were improved when the number of actuated relief valves was reduced. But on the contrary the pressure reduction was limited by the performance of the HPIS and the equilibrium with the outlet flow from the relief valves. From these results a scenario with the consecutive opening of the three relief valves so as to depressurise while at the same time trying to optimise the in-vessel mass balance was proposed with a possible automation. (author)

  14. High Level Waste Feed Delivery AZ-101 Batch Transfer to the Private Contractor Transfer and Mixing Process Improvements

    International Nuclear Information System (INIS)

    DUNCAN, G.P.

    2000-01-01

    The primary purpose of this business case is to provide Operations and Maintenance with a detailed transfer process review for the first High Level Waste (HLW) feed delivery to the Privatization Contractor (PC), AZ-101 batch transfer to PC. The Team was chartered to identify improvements that could be implemented in the field. A significant penalty can be invoked for not providing the quality, quantity, or timely delivery of HLW feed to the PC

  15. Industrial process heat market assessment

    International Nuclear Information System (INIS)

    Bresnick, S.

    1981-12-01

    This report is designed to be a reference resource, giving a broad perspective of the potential HTGR market for industrial process heat. It is intended to serve as a briefing document for those wishing to obtain background information and also to serve as a starting point from which more detailed and refined studies may be undertaken. In doing so, the report presents a qualitative and quantitative description of the industrial process heat market in the US, provides a summary discussion of cogeneration experience to date, and outlines the existing institutional and financial framework for cogeneration. The intent is to give the reader an understanding of the current situation and experience in this area. The cogeneration area in particular is an evolving one because of regulations and tax laws, which are still in the process of being developed and interpreted. The report presents the latest developments in regulatory and legislative activities which are associated with that technology. Finally, the report presents a brief description of the three HTGR systems under study during the current fiscal year and describes the specific market characteristics which each application is designed to serve

  16. Industrial process heat market assessment

    Energy Technology Data Exchange (ETDEWEB)

    Bresnick, S.

    1981-12-01

    This report is designed to be a reference resource, giving a broad perspective of the potential HTGR market for industrial process heat. It is intended to serve as a briefing document for those wishing to obtain background information and also to serve as a starting point from which more detailed and refined studies may be undertaken. In doing so, the report presents a qualitative and quantitative description of the industrial process heat market in the US, provides a summary discussion of cogeneration experience to date, and outlines the existing institutional and financial framework for cogeneration. The intent is to give the reader an understanding of the current situation and experience in this area. The cogeneration area in particular is an evolving one because of regulations and tax laws, which are still in the process of being developed and interpreted. The report presents the latest developments in regulatory and legislative activities which are associated with that technology. Finally, the report presents a brief description of the three HTGR systems under study during the current fiscal year and describes the specific market characteristics which each application is designed to serve.

  17. Assessment of Aflatoxin Contamination of Maize, Peanut Meal and Poultry Feed Mixtures from Different Agroecological Zones in Cameroon

    Directory of Open Access Journals (Sweden)

    Jean Raphaël Kana

    2013-04-01

    Full Text Available Mycotoxins affect poultry production by being present in the feed and directly causing a negative impact on bird performance. Carry-over rates of mycotoxins in animal products are, in general, small (except for aflatoxins in milk and eggs therefore representing a small source of mycotoxins for humans. Mycotoxins present directly in human food represent a much higher risk. The contamination of poultry feed by aflatoxins was determined as a first assessment of this risk in Cameroon. A total of 201 samples of maize, peanut meal, broiler and layer feeds were collected directly at poultry farms, poultry production sites and poultry feed dealers in three agroecological zones (AEZs of Cameroon and analyzed for moisture content and aflatoxin levels. The results indicate that the mean of the moisture content of maize (14.1% was significantly (P < 0.05 higher than all other commodities (10.0%–12.7%. Approximately 9% of maize samples were positive for aflatoxin, with concentrations overall ranging from <2 to 42 µg/kg. Most of the samples of peanut meal (100%, broiler (93.3% and layer feeds (83.0% were positive with concentrations of positive samples ranging from 39 to 950 µg/kg for peanut meal, 2 to 52 µg/kg for broiler feed and 2 to 23 µg/kg for layer feed. The aflatoxin content of layer feed did not vary by AEZ, while the highest (16.8 µg/kg and the lowest (8.2 µg/kg aflatoxin content of broiler feed were respectively recorded in Western High Plateau and in Rainforest agroecological zones. These results suggest that peanut meal is likely to be a high risk feed, and further investigation is needed to guide promotion of safe feeds for poultry in Cameroon.

  18. Optimization on cooperative feed strategy for radial–axial ring rolling process of Inco718 alloy by RSM and FEM

    Directory of Open Access Journals (Sweden)

    Zhu Xinglin

    2016-06-01

    Full Text Available During radial–axial ring rolling process, cooperative strategy of the radial–axial feed is critical for dimensional accuracy and thermo mechanical parameters distribution of the formed ring. In order to improve the comprehensive quality of the ring parts, response surface method (RSM is employed for the first time to optimize the cooperative feed strategy for radial–axial ring rolling process by combining it with an improved and verified 3D coupled thermo-mechanical finite element model. The feed trajectory is put forward to describe cooperative relationship of the radial–axial feed and three variables are designed based on the feed trajectory. In order to achieve multi-objective optimization, four responses including thermo mechanical parameters distribution and rolling force are proposed. Based on the FEM results, RSM is used to establish a response model to depict the function relationship between the objective response and design variables. Through this approximate model, effects of different variables on ring rolling process are analyzed connectedly and optimal feed strategy is obtained by resorting to the optimal chart specific to a constraint condition.

  19. [Review of assessment methods used to evaluate feeding for children with pervasive developmental disorder].

    Science.gov (United States)

    Nadon, G; Ehrmann Feldman, D; Gisel, E

    2008-08-01

    Current evaluations used by occupational therapists to assess and treat feeding problems derive mainly from the domain of dysphagia. The purpose of this article is to familiarize the reader with tools used, in research, for children with pervasive developmental disorders (PDD) and to determine if any of these meet the needs of occupational therapists. The following data bases were searched: Medline, CINAHL, HAPI and PsyINFO, using the terms pervasive developmental disorder, autism, Asperger syndrome, pervasive developmental disorder not otherwise specified, eating behavior, eating disorder, food preference, food selectivity, feeding disorders, picky eater and child. All articles published between 1980 and 2006 (n=27) were reviewed. A total of 20 studies met our selection criteria. Assessment methods are compared using the Disability Creation Model (DCP). The DCP is the Quebec alternative to the International Classification of Functioning, Disability and Health (ICF). None of the evaluation tools reviewed met all factors that may influence eating in children with PDD. Implications for research and practice in occupational therapy are discussed.

  20. Feeding State Modulates Behavioral Choice and Processing of Prey Stimuli in the Zebrafish Tectum.

    Science.gov (United States)

    Filosa, Alessandro; Barker, Alison J; Dal Maschio, Marco; Baier, Herwig

    2016-05-04

    Animals use the sense of vision to scan their environment, respond to threats, and locate food sources. The neural computations underlying the selection of a particular behavior, such as escape or approach, require flexibility to balance potential costs and benefits for survival. For example, avoiding novel visual objects reduces predation risk but negatively affects foraging success. Zebrafish larvae approach small, moving objects ("prey") and avoid large, looming objects ("predators"). We found that this binary classification of objects by size is strongly influenced by feeding state. Hunger shifts behavioral decisions from avoidance to approach and recruits additional prey-responsive neurons in the tectum, the main visual processing center. Both behavior and tectal function are modulated by signals from the hypothalamic-pituitary-interrenal axis and the serotonergic system. Our study has revealed a neuroendocrine mechanism that modulates the perception of food and the willingness to take risks in foraging decisions. Copyright © 2016 Elsevier Inc. All rights reserved.

  1. An integrated assessment of the feed-in tariff system in Spain

    International Nuclear Information System (INIS)

    Rio, Pablo del; Gual, Miguel A.

    2007-01-01

    Given the relative socioeconomic and environmental benefits linked to the deployment of electricity from renewable energy sources (RES-E), its public promotion has been a priority on the agendas of governments in virtually all European countries. The Spanish government has not been an exception in this regard. Public support at the national level has been based on a feed-in tariff (FIT) scheme, which has had its pros and cons in the encouragement of effective and cost-effective deployment of RES-E. Based on different information sources and empirical data, this paper provides an integrated assessment of the system in the period of influence of the Royal Decree 2818/1998 (i.e., between 1999 and 2003), according to different criteria. The strong and weak points of the system are assessed. The paper suggests that some of its elements should be redesigned

  2. An integrated assessment of the feed-in tariff system in Spain

    International Nuclear Information System (INIS)

    Rio, P. del; Gual, M.A.

    2007-01-01

    Given the relative socioeconomic and environmental benefits linked to the deployment of electricity from renewable energy sources (RES-E), its public promotion has been a priority on the agendas of governments in virtually all European countries. The Spanish government has not been an exception in this regard. Public support at the national level has been based on a feed-in tariff (FIT) scheme, which has had its pros and cons in the encouragement of effective and cost-effective deployment of RES-E. Based on different information sources and empirical data, this paper provides an integrated assessment of the system in the period of influence of the Royal Decree 2818/1998 (i.e., between 1999 and 2003), according to different criteria. The strong and weak points of the system are assessed. The paper suggests that some of its elements should be redesigned. (author)

  3. Safety assessment of radiation pasteurization of poultry feed : production performance trails

    Energy Technology Data Exchange (ETDEWEB)

    El din, M D; Farag, H; Borsa, Joseph; Guenter, Bill

    1989-01-01

    Feed used to rear farm animals for human consumption has often been implicated as vehicle for dissemination of microbial pathogens that can adversely affect both animals or birds, and humans. Radiation pasteurization of animal feed to improve its microbiological quality should reduce the incidence of feed-borne infection (both clinical and subs clinical) in the herd or flock. This would result in safer food for the consumer, and improved economic performance of the production unit. This latter benefit is particularly important because it could directly offset the treating the feed. The likelihood of occurrence, as well as the magnitude, of any improved economic performance in the herd or flock consuming the irradiated feed must be determined experimentally. Accordingly, short term feeding tests were carried out to determine the effect of radiation pasteurization of poultry feed on growth performance of young chicks. Newly hatched white leghorn cacklers were used in the present studies to examine the effects of (i) control vs irradiated feed; and (ii) control vs stressed (transient chilled) birds. Feed consumption and pen weight were monitored for 21 days. Three experiments were conducted in the summer of 1989, using separate lots of commercially obtained feed ingredients for each experiment, In two of the three feeding tests there was a highly significant (p<.01) increase in feed conversion efficiency in the birds fed the irradiated feed. The magnitude of the increased efficiency was 2.4% and 2.8% in the two positive experiments. In one of the two positive experiments the feed contained antibiotics (Penicillin and Streptomycin) while the feed in other was antibiotic-free these results suggest that radiation pasteurization of poultry feed may have a beneficial effect on the feed conversion efficiency of the birds consuming that feed.8 tab.

  4. Safety assessment of radiation pasteurization of poultry feed : production performance trails

    International Nuclear Information System (INIS)

    El din, M. D.; Farag, H.; Borsa, Joseph; Guenter, Bill.

    1989-01-01

    Feed used to rear farm animals for human consumption has often been implicated as vehicle for dissemination of microbial pathogens that can adversely affect both animals or birds, and humans. Radiation pasteurization of animal feed to improve its microbiological quality should reduce the incidence of feed-borne infection (both clinical and subs clinical) in the herd or flock. This would result in safer food for the consumer, and improved economic performance of the production unit. This latter benefit is particularly important because it could directly offset the treating the feed. The likelihood of occurrence, as well as the magnitude, of any improved economic performance in the herd or flock consuming the irradiated feed must be determined experimentally. Accordingly, short term feeding tests were carried out to determine the effect of radiation pasteurization of poultry feed on growth performance of young chicks. Newly hatched white leghorn cacklers were used in the present studies to examine the effects of (i) control vs irradiated feed; and (ii) control vs stressed (transient chilled) birds. Feed consumption and pen weight were monitored for 21 days. Three experiments were conducted in the summer of 1989, using separate lots of commercially obtained feed ingredients for each experiment, In two of the three feeding tests there was a highly significant (p<.01) increase in feed conversion efficiency in the birds fed the irradiated feed. The magnitude of the increased efficiency was 2.4% and 2.8% in the two positive experiments. In one of the two positive experiments the feed contained antibiotics (Penicillin and Streptomycin) while the feed in other was antibiotic-free these results suggest that radiation pasteurization of poultry feed may have a beneficial effect on the feed conversion efficiency of the birds consuming that feed.8 tab

  5. Life cycle sustainability assessment of chemical processes

    DEFF Research Database (Denmark)

    Xu, Di; Lv, Liping; Ren, Jingzheng

    2017-01-01

    In this study, an integrated vector-based three-dimensional (3D) methodology for the life cycle sustainability assessment (LCSA) of chemical process alternatives is proposed. In the methodology, a 3D criteria assessment system is first established by using the life cycle assessment, the life cycl...

  6. What Parents Really Think about Their Feeding Practices and Behaviors: Lessons Learned from the Development of a Parental Feeding Assessment Tool

    Directory of Open Access Journals (Sweden)

    Stephanie L. Sitnick

    2014-06-01

    Full Text Available Interest in the role that parenting assumes in child obesity has increased the need for valid and reliable screening tools that are specific for populations targeted by programming efforts. While low-income families comprise a large audience for Cooperative Extension obesity prevention programs, valid and reliable self-administered parenting assessments for this population are lacking. Development of such tools requires understanding low-income parents’ interpretations of questions related to their parenting. The current paper reports on interviews conducted with low-income parents (N = 44 of 3- to 5-year-old children during the development of a tool to assess parenting in the context of feeding. Interviews revealed areas of potential discrepancy between parents’ and researchers’ interpretations of items that may affect parents’ responses and subsequent measurement validity when used in Cooperative Extension community intervention setting. Three themes emerged that may interfere with valid and reliable assessments of constructs: fear of being labeled a “harsh parent,” response bias due to previous knowledge, and discrepancy in interpretation of the intended construct. Results highlight complexities of constructing parent-report assessments of parenting for low-income audiences, and potential hazards of using research-focused tools with high respondent burden. Guidelines for educators assessing parents’ feeding behaviors are presented.

  7. Impact of particle size, thermal processing, fat inclusion, and moisture addition on starch gelatinization of broiler feeds

    Directory of Open Access Journals (Sweden)

    K Muramatsu

    2014-12-01

    Full Text Available The present study evaluated the effect of feed particle size, thermal processing different levels of fat inclusion and of moisture addition on the amount of gelatinized starch in a corn-soybean broiler diet. The different processing factors were combined in a 2 x 4 x 4 x 2 factorial arrangement in a three randomized block design consisting of three production series: two particle sizes (coarse: 1041 microns and medium: 743 microns, four fat inclusion levels at the mixer (15, 25, 35, and 45 g/kg of feed, four moisture addition levels in the conditioner (0, 7, 14, and 21g/kg of feed, and two thermal processing treatments (conditioning-pelleting or conditioning-expanding-pelleting which resulted in 64 different processed feeds. For the determination of the amount of gelatinized starch one feed sample was collected per treatment in each of three production series, totaling three replicates/treatment. Data were transformed using a variation of Box-Cox transformation in order to fit normal distribution (p>0.05. Adding moisture up to 21g/kg of feed in the conditioner linearly increased the amount of gelatinized starch (p<0.05. The conditioner-expander-pelleting treatment of the diets (at 110°C increased (p<0.05 the degree of starch gelatinization from 32.0 to 35.3 % compared with the conditioner-pelleting treatment (at 80-82°C. The gelatinized starch content increased from 30.2 to 37.2% in the feed (p<0.05 as the particle size increased from medium to coarse. Fat inclusion had a quadratic effect (p<0.05 on starch gelatinization. The degree of starch gelatinization was significantly reduced with fat inclusion levels higher than 35 g/kg of diet. The factors evaluated in this study resulted in interactions and significant effects on degree of starch gelatinization.

  8. Mixing process in the preparation of feed pellets at technological conditions rational parametres choice

    Directory of Open Access Journals (Sweden)

    E. S. Shentsova

    2016-01-01

    Full Text Available The mixing of ingredients – the most important process step in the manufacture of fodder pellets. The technology involves using molasses (warmed to 30–40 °C as a binder. In its composition is administered a mixture of salts of trace elements (copper sulfate, zinc sulfate, cobalt carbonate, potassium iodide, ferrous sulfate, manganese sulfate, sodium selenite, vitamins, salt, magnesium oxide, feed limestone, mono calcium phosphate and lime. Research on the development of feed pellets were carried out in laboratory conditions using experimental equipment. Mixer-reactor created the conditions for heating and temperature control of mass be mixed due to the occurring chemical reaction between water contained in the molasses, and the presence of oxides of calcium and magnesium. The choice of rational parameters of the mixing process upon receipt of fodder pellets allows to provide the high quality product with minimal energy costs. The ranges of the input information factors selected with the aid of a central rotatable uniforms-planning allowed with 56 experiments in a third-multiple replication to obtain the regression equation adequately describing the mixing process. The main factors were: the content of molasses, %; the content of calcium oxide, %; frequency of rotation of the stirrer, rpm; the content of salt in the recipe, %; the temperature of blending, °C. Output factors – productivity, kg/h; energy consumption, kWh; homogeneity of mixing, %. In the result of experiments impact factors and mathematical model of the process that allows to define output parameters within chosen ranges of variation of input factors are obtained. Greatest influence – the content of molasses in the product, the lowest – content of salt in the recipe. Efficiency of mixing hard distributed components pertaining to the most important biologically active substances was evaluated. Content (% of entered of vitamins and minerals in the pellets did not differ

  9. Applicability and feasibility of systematic review for performing evidence-based risk assessment in food and feed safety

    DEFF Research Database (Denmark)

    Aiassa, E.; Higgins, J.P.T.; Frampton, G. K.

    2015-01-01

    for answering questions in health care, and can be implemented to minimise biases in food and feed safety risk assessment. However, no methodological frameworks exist for refining risk assessment multi-parameter models into questions suitable for systematic review, and use of meta-analysis to estimate all......Food and feed safety risk assessment uses multi-parameter models to evaluate the likelihood of adverse events associated with exposure to hazards in human health, plant health, animal health, animal welfare and the environment. Systematic review and meta-analysis are established methods...... parameters in the risk model. This approach to planning and prioritising systematic review seems to have useful implications for producing evidence-based food and feed safety risk assessment....

  10. Lead intoxication in dogs: risk assessment of feeding dogs trimmings of lead-shot game.

    Science.gov (United States)

    Høgåsen, Helga R; Ørnsrud, Robin; Knutsen, Helle K; Bernhoft, Aksel

    2016-07-25

    Expanding lead-based bullets, commonly used for hunting of big game, produce a scattering of lead particles in the carcass around the wound channel. Trimmings around this channel, which are sometimes fed to dogs, may contain lead particles. The aim of this study was to assess potential health effects of feeding dogs such trimmings. Lead ingestion most commonly causes gastrointestinal and neurological clinical signs, although renal, skeletal, haematological, cardiovascular and biochemical effects have also been reported. Experimental data indicate that a daily dose of around 1 mg lead as lead acetate/kg body weight for ten days may be considered as a Lowest Observed Effect Level in dogs. Acute toxicity documentation from the Centers for Disease Control and Prevention indicates 300 mg/kg body weight as the lowest dose of lead acetate causing death in dogs after oral ingestion. Our assessment suggests that dogs fed trimmings of lead-shot game may be affected by the amounts of lead present, and that even deadly exposure could occasionally occur. The intestinal absorption of lead from bullets was assumed to be 10-80 % of that of lead acetate, reflecting both the variability in particle size and uncertainty about the bioavailability of metallic lead in dogs. Despite data gaps, this study indicates that feeding dogs trimmings of lead-shot game may represent a risk of lead intoxication. More research is needed to assess the exact consequences, if lead-based bullets are still to be used. Meanwhile, we recommend that trimmings close to the wound channel should be made inaccessible to dogs, as well as to other domestic or wild animals.

  11. A biotechnological process for treatment and recycling poultry wastes manure as a feed ingredient

    Energy Technology Data Exchange (ETDEWEB)

    El Jalil, M.H. [Faculty of Sciences, Kenitra (Morocco). Biology Dept.; Hassan II Inst. of Agronomy and Veterinary Medicine, Rabat-Instituts (Morocco); Faid, M. [Hassan II Inst. of Agronomy and Veterinary Medicine, Rabat-Instituts (Morocco); Elyachioui, M. [Faculty of Sciences, Kenitra (Morocco)

    2001-07-01

    Poultry wastes manure was diluted by adding the same amount of water 50-50 (w/v). They were then mixed with 10% molasses. The mixture was inoculated with a starter culture of Lactobacillus plantarum and Pediococcus acidolactici, and incubated at 30{sup o}C for 10 days. Changes in nutritional quality and biochemical properties (pH, total nitrogen, total volatile nitrogen, non protein nitrogen, carbohydrates and ash) were determined for the raw and the transformed product. In parallel, microbiological analyses, including standard plant count, enterobacteria and enterococci, were performed. Results indicated that the product obtained from the wastes fermentation showed low counts of enterobacteria and enterococci. Chemical determinations showed a net decrease of the pH to around 4.0 and the growth curve of the lactic acid bacteria showed the success of the acidification process. The total nitrogen was conserved in the product and the total volatile nitrogen was totally eliminated. The product was used for substituting some protein sources in a conventional formula used in laying feeding of three lots. Two formulae containing, respectively, 20% and 40% of the product was compared to the control (0%). The food consumption and laying performances were monitored for 30 days. The nutritional test indicted that the incorporation of the poultry manure silage of up to 40% gave laying performances similar to those obtained with the conventional formula. These results show that it is possible to transform poultry manure by controlled fermentation and that the product has an added value as a feed ingredient. (Author)

  12. Socio-economic resources, young child feeding practices, consumption of highly processed snacks and sugar-sweetened beverages: a population-based survey in rural northwestern Nicaragua.

    Science.gov (United States)

    Contreras, Mariela; Blandón, Elmer Zelaya; Persson, Lars-Åke; Hjern, Anders; Ekström, Eva-Charlotte

    2015-01-21

    Socio-economic resources may be associated with infant feeding in complex patterns in societies undergoing a nutrition transition. This study evaluates associations of housing quality, food security and maternal education to the World Health Organization (WHO) feeding recommendations and to consumption of highly processed snacks (HP snacks) and sugar-sweetened beverages (SSBs) in rural Nicaragua. Data were collected from May to November 2009, with mothers of 0- to 35-month-olds being asked about young child feeding using a food frequency questionnaire. A validated questionnaire was used to assess household food insecurity and data were collected on maternal education and housing quality. Pearson's chi-squared test was used to compare proportions and determine associations between the resources and young child feeding. The three socio-economic resources and other confounders were introduced to multivariate logistic regression analyses to assess the independent contribution of the resources to the feeding practices and consumption of HP snacks and SSBs. Mothers with the lowest education level were more likely to be exclusively breastfeeding (EBF) their infants (OR not EBF: 0.19; 95% CI: 0.07, 0.51), whilst mothers of 6- to 35-month-olds in the lowest education category had more inadequate dietary diversity (DD) (OR for not meet DD: 2.04; 95% CI: 1.36, 3.08), were less likely to consume HP snacks (OR for HP snacks: 0.47; 95% CI: 0.32, 0.68) and SSBs (OR for SSBs: 0.68; 95% CI: 0.46, 0.98), compared to mothers with the highest level of education. Similarly, children residing in households with the highest food insecurity were also more prone to have inadequate dietary diversity (OR for not meet DD: 1.47; 95% CI: 1.05, 2.05). The odds for double burden of suboptimal feeding (concurrent inadequate diet and consumption of HP snacks/SSBs) were significantly lower in children of least educated mothers (OR: 0.64; 95% CI: 0.44, 0.92). Higher level of education was associated

  13. Effect of feeding soybean meal and differently processed peas on the gut mucosal immune system of broilers.

    Science.gov (United States)

    Röhe, I; Göbel, T W; Goodarzi Boroojeni, F; Zentek, J

    2017-07-01

    Peas are traditionally used as a protein source for poultry. However, peas contain antinutritional factors (ANF), which are associated with the initiation of local and systemic immune reactions. The current study examined the effect of feeding raw or differently processed peas in comparison with feeding a soybean meal (SBM) based control diet (C) on the gut mucosal immune system of broilers in a 35 day feeding trial. In six replicates, a total of 360 one-day-old male broilers were randomly allocated to four different groups receiving C, or three treatment diets containing raw, fermented, and enzymatically pre-digested peas, each supplying 30% of required crude protein. After slaughtering, jejunal samples were taken for immunohistochemical, flow cytometric, and gene expression analyses. Investigations were focused on the topological distribution of intraepithelial leukocytes (villus tip, villus mid, and crypt region) as well as on the further characterization of the different intraepithelial lymphocytes (IEL) and concomitant pro- and anti-inflammatory cytokines. Broilers receiving the raw or processed pea diets had higher numbers of intraepithelial CD45+ leukocytes in the tip (P = 0.004) and mid region (P pea containing diets in comparison with those fed C. The flow cytometric phenotyping showed a similar relative distribution of IEL among the feeding groups. The expression of intestinal pro- and anti-inflammatory cytokines was affected by feeding the different diets only to a minor extent. To conclude, feeding of diets formulated with raw and processed peas in comparison with feeding a SBM control diet initiated mucosal immune responses in the jejunum of broilers indicated by a quantitative increase of intraepithelial T cells. Further research is needed in order to ascertain the specific factors which are responsible for observed local immune reactions and how these local reactions might affect the immune status and health of broilers. © 2017 Poultry Science

  14. Conceptualising the effectiveness of impact assessment processes

    International Nuclear Information System (INIS)

    Chanchitpricha, Chaunjit; Bond, Alan

    2013-01-01

    This paper aims at conceptualising the effectiveness of impact assessment processes through the development of a literature-based framework of criteria to measure impact assessment effectiveness. Four categories of effectiveness were established: procedural, substantive, transactive and normative, each containing a number of criteria; no studies have previously brought together all four of these categories into such a comprehensive, criteria-based framework and undertaken systematic evaluation of practice. The criteria can be mapped within a cycle/or cycles of evaluation, based on the ‘logic model’, at the stages of input, process, output and outcome to enable the identification of connections between the criteria across the categories of effectiveness. This framework is considered to have potential application in measuring the effectiveness of many impact assessment processes, including strategic environmental assessment (SEA), environmental impact assessment (EIA), social impact assessment (SIA) and health impact assessment (HIA). -- Highlights: • Conceptualising effectiveness of impact assessment processes. • Identification of factors influencing effectiveness of impact assessment processes. • Development of criteria within a framework for evaluating IA effectiveness. • Applying the logic model to examine connections between effectiveness criteria

  15. Conceptualising the effectiveness of impact assessment processes

    Energy Technology Data Exchange (ETDEWEB)

    Chanchitpricha, Chaunjit, E-mail: chaunjit@g.sut.ac.th [School of Environmental Health, Suranaree University of Technology, 111 University Avenue, Maung District, Nakhon Ratchasima 30000 (Thailand); Bond, Alan, E-mail: alan.bond@uea.ac.uk [School of Environmental Sciences, University of East Anglia, Norwich NR4 7TJ (United Kingdom); Unit for Environmental Sciences and Management School of Geo and Spatial Sciences, Internal Box 375, North West University (Potchefstroom campus) (South Africa)

    2013-11-15

    This paper aims at conceptualising the effectiveness of impact assessment processes through the development of a literature-based framework of criteria to measure impact assessment effectiveness. Four categories of effectiveness were established: procedural, substantive, transactive and normative, each containing a number of criteria; no studies have previously brought together all four of these categories into such a comprehensive, criteria-based framework and undertaken systematic evaluation of practice. The criteria can be mapped within a cycle/or cycles of evaluation, based on the ‘logic model’, at the stages of input, process, output and outcome to enable the identification of connections between the criteria across the categories of effectiveness. This framework is considered to have potential application in measuring the effectiveness of many impact assessment processes, including strategic environmental assessment (SEA), environmental impact assessment (EIA), social impact assessment (SIA) and health impact assessment (HIA). -- Highlights: • Conceptualising effectiveness of impact assessment processes. • Identification of factors influencing effectiveness of impact assessment processes. • Development of criteria within a framework for evaluating IA effectiveness. • Applying the logic model to examine connections between effectiveness criteria.

  16. Development of the high-level waste high-temperature melter feed preparation flowsheet for vitrification process testing

    International Nuclear Information System (INIS)

    Seymour, R.G.

    1995-01-01

    High-level waste (HLW) feed preparation flowsheet development was initiated in fiscal year (FY) 1994 to evaluate alternative flowsheets for preparing melter feed for high-temperature melter (HTM) vitrification testing. Three flowsheets were proposed that might lead to increased processing capacity relative to the Hanford Waste Vitrification Plant (HWVP) and that were flexible enough to use with other HLW melter technologies. This document describes the decision path that led to the selection of flowsheets to be tested in the FY 1994 small-scale HTM tests. Feed preparation flowsheet development for the HLW HTM was based on the feed preparation flowsheet that was developed for the HWVP. This approach allowed the HLW program to build upon the extensive feed preparation flowsheet database developed under the HWVP Project. Primary adjustments to the HWVP flowsheet were to the acid adjustment and glass component additions. Developmental background regarding the individual features of the HLW feed preparation flowsheets is provided. Applicability of the HWVP flowsheet features to the new HLW vitrification mission is discussed. The proposed flowsheets were tested at the laboratory-scale at Pacific Northwest Laboratory. Based on the results of this testing and previously established criteria, a reductant-based flowsheet using glycolic acid and a nitric acid-based flowsheet were selected for the FY 1994 small-scale HTM testing

  17. Evolution of risk assessment strategies for food and feed uses of stacked GM events.

    Science.gov (United States)

    Kramer, Catherine; Brune, Phil; McDonald, Justin; Nesbitt, Monique; Sauve, Alaina; Storck-Weyhermueller, Sabine

    2016-09-01

    Data requirements are not harmonized globally for the regulation of food and feed derived from stacked genetically modified (GM) events, produced by combining individual GM events through conventional breeding. The data required by some regulatory agencies have increased despite the absence of substantiated adverse effects to animals or humans from the consumption of GM crops. Data from studies conducted over a 15-year period for several stacked GM event maize (Zea mays L.) products (Bt11 ×  GA21, Bt11 ×  MIR604, MIR604 ×  GA21, Bt11 ×  MIR604 ×  GA21, Bt11 ×  MIR162 ×  GA21 and Bt11 ×  MIR604 ×  MIR162 ×  GA21), together with their component single events, are presented. These data provide evidence that no substantial changes in composition, protein expression or insert stability have occurred after combining the single events through conventional breeding. An alternative food and feed risk assessment strategy for stacked GM events is suggested based on a problem formulation approach that utilizes (i) the outcome of the single event risk assessments, and (ii) the potential for interactions in the stack, based on an understanding of the mode of action of the transgenes and their products. © 2016 The Authors. Plant Biotechnology Journal published by Society for Experimental Biology and The Association of Applied Biologists and John Wiley & Sons Ltd.

  18. An Assessment of Subsurface Intake Systems: Planning and Impact on Feed Water Quality for SWRO Facilities

    KAUST Repository

    Dehwah, Abdullah

    2017-12-01

    Subsurface intake systems are known to improve the feed water quality for SWRO plants. However, a little is known about the feasibility of implementation in coastal settings, the degree of water quality improvements provided by these systems, and the internal mechanisms of potential fouling compounds removal within subsurface intake systems. A new method was developed to assess the feasibility of using different subsurface intake systems in coastal areas and was applied to Red Sea coastline of Saudi Arabia. The methodology demonstrated that five specific coastal environments could support well intake systems use for small-capacity SWRO plants, whereas large-capacity SWRO facilities could use seabed gallery intake systems. It was also found that seabed intake system could run with no operational constraints based on the high evaporation rates and associated diurnal salinity changes along the coast line. Performance of well intake systems in several SWRO facilities along the Red Sea coast showed that the concentrations of organic compounds were reduced in the feed water, similar or better than traditional pretreatment methodologies. Nearly all algae, up to 99% of bacteria, between 84 and 100% of the biopolymer fraction of NOM, and a high percentage of TEP were removed during transport through the aquifer. These organics cause membrane biofouling and using well intakes showed a 50-75% lower need to clean the SWRO membranes compared to conventional open-ocean intakes. An assessment of the effectiveness of seabed gallery intake systems was conducted through a long-term bench-scale column experiment. The simulation of the active layer (upper 1 m) showed that it is highly effective at producing feed water quality improvements and acts totally different compared to slow sand filtration systems treating freshwater. No development of a “schmutzdecke” layer occurred and treatment was not limited to the top 10 cm, but throughout the full column thickness. Algae and

  19. Assessment of aflatoxin contamination of maize, peanut meal and poultry feed mixtures from different agroecological zones in Cameroon.

    Science.gov (United States)

    Kana, Jean Raphaël; Gnonlonfin, Benoit Gbemenou Joselin; Harvey, Jagger; Wainaina, James; Wanjuki, Immaculate; Skilton, Robert A; Teguia, Alexis

    2013-04-29

    Mycotoxins affect poultry production by being present in the feed and directly causing a negative impact on bird performance. Carry-over rates of mycotoxins in animal products are, in general, small (except for aflatoxins in milk and eggs) therefore representing a small source of mycotoxins for humans. Mycotoxins present directly in human food represent a much higher risk. The contamination of poultry feed by aflatoxins was determined as a first assessment of this risk in Cameroon. A total of 201 samples of maize, peanut meal, broiler and layer feeds were collected directly at poultry farms, poultry production sites and poultry feed dealers in three agroecological zones (AEZs) of Cameroon and analyzed for moisture content and aflatoxin levels. The results indicate that the mean of the moisture content of maize (14.1%) was significantly (P poultry in Cameroon.

  20. Feeding behavioral assessment in children with cleft lip and/or palate and parental responses to behavior problems

    Directory of Open Access Journals (Sweden)

    Marzieh Hasanpour

    2017-01-01

    Full Text Available Background: Children with cleft lip and/or palate frequently experience feeding difficulties that may place them at risk of malnutrition. Parents' negative response to these problems is associated with development of problematic behaviors in the child. This study aimed to investigate feeding behavior in children with cleft lip and/or palate and parental responses to these problems. Materials and Methods: A total of 120 parents of children (aged 6 months to 6 years with cleft lip and/or palate were recruited from the Cleft Lip and Palate Clinic in Isfahan University of Medical Sciences, Isfahan, Iran, who gave consent and completed a two-part questionnaire through interviews. Part A of the questionnaire consisted of 25 items that evaluate children's feeding behavior during mealtimes and part B consists of 18 items that assess parental response (strategies, feelings, and anxiety to these problems. Results: Independent t-test showed a significant difference in the mean score of feeding behavior in mothers (P = 0.020 and parental responses in fathers (P = 0.030. The Pearson correlation coefficient showed an inverse correlation between behavioral feeding score and children's interval (P = 0.008, r = −0.381 and direct correlation between parental response and feeding behavioral difficulties (P = 0.003, r = 0.428. Conclusions: With regards to the results representing appropriate feeding behaviors in children with cleft lip and/or palate, it is suggested that feeding be avioral assessment is an essential nursing and nonmedical intervention for all children.

  1. Process Stability Identification Through Dynamic Study of Single-bed Ammonia Reactor with Feed-Effluent Heat Exchanger (FEHE

    Directory of Open Access Journals (Sweden)

    Adhi Tri Partono

    2018-01-01

    Full Text Available In ammonia reactor system, a feed-effluent heat exchanger (FEHE is typically installed to utilize reaction-generated heat to heat the reactor’s feed. Utilizing energy from exothermic reaction to the incoming feed stream is often called “autothermic operation”. Despite the advantage of FEHE, there is a risk of utilizing FEHE in a reactor system such as instability of process temperature or known as hysteresis. Hysteresis phenomena in chemical process could cause operational problems, for example it could damage the integrity of the equipment’s material. This paper aims to evaluate the dynamic behavior of a single-bed ammonia reactor with FEHE, particularly to propose a way to prevent instability within the system. The dynamic simulation of the single-bed ammonia reactor with FEHE was performed with Aspen HYSYS v8.8. The result of the simulation result shows that hysteresis phenomenon in the ammonia reactor system occurs when the feed’s temperature is below a certain value. If the feed temperature reaches that value, the temperature of the reactor’s outlet oscillates. One of the solution to keep the feed temperature above that critical value is by installing a trim heater within the system. Based on the simulation, trim heater installation within the system is able to prevent hysteresis in the system evaluated.

  2. A quantitative real time polymerase chain reaction approach for estimating processed animal proteins in feed: preliminary data

    Directory of Open Access Journals (Sweden)

    Maria Cesarina Abete

    2013-04-01

    Full Text Available Lifting of the ban on the use of processed animal proteins (PAPs from non-ruminants in non-ruminant feed is in the wind, avoiding intraspecies recycling. Discrimination of species will be performed through polymerase chain reaction (PCR, which is at a moment a merely qualitative method. Nevertheless, quantification of PAPs in feed is needed. The aim of this study was to approach the quantitative determination of PAPs in feed through Real Time (RT-PCR technique; three different protocols picked up from the literature were tested. Three different kind of matrices were examined: pure animal meals (bovine, chicken and pork; one feed sample certified by the European reference laboratory on animal proteins (EURL AP in feed spiked with 0.1% bovine meal; and genomic DNAs from bovine, chicken and pork muscles. The limit of detection (LOD of the three protocols was set up. All the results obtained from the three protocols considered failed in the quantification process, most likely due to the uncertain copy numbers of the analytical targets chosen. This preliminary study will allow us to address further investigations, with the purpose of developing a RT-PCR quantitative method.

  3. Safety assessment considerations for food and feed derived from plants with genetic modifications that modulate endogenous gene expression and pathways.

    Science.gov (United States)

    Kier, Larry D; Petrick, Jay S

    2008-08-01

    The current globally recognized comparative food and feed safety assessment paradigm for biotechnology-derived crops is a robust and comprehensive approach for evaluating the safety of both the inserted gene product and the resulting crop. Incorporating many basic concepts from food safety, toxicology, nutrition, molecular biology, and plant breeding, this approach has been used effectively by scientists and regulatory agencies for 10-15 years. Current and future challenges in agriculture include the need for improved yields, tolerance to biotic and abiotic stresses, and improved nutrition. The next generation of biotechnology-derived crops may utilize regulatory proteins, such as transcription factors that modulate gene expression and/or endogenous plant pathways. In this review, we discuss the applicability of the current safety assessment paradigm to biotechnology-derived crops developed using modifications involving regulatory proteins. The growing literature describing the molecular biology underlying plant domestication and conventional breeding demonstrates the naturally occurring genetic variation found in plants, including significant variation in the classes, expression, and activity of regulatory proteins. Specific examples of plant modifications involving insertion or altered expression of regulatory proteins are discussed as illustrative case studies supporting the conclusion that the current comparative safety assessment process is appropriate for these types of biotechnology-developed crops.

  4. Fault detection of feed water treatment process using PCA-WD with parameter optimization.

    Science.gov (United States)

    Zhang, Shirong; Tang, Qian; Lin, Yu; Tang, Yuling

    2017-05-01

    Feed water treatment process (FWTP) is an essential part of utility boilers; and fault detection is expected for its reliability improvement. Classical principal component analysis (PCA) has been applied to FWTPs in our previous work; however, the noises of T 2 and SPE statistics result in false detections and missed detections. In this paper, Wavelet denoise (WD) is combined with PCA to form a new algorithm, (PCA-WD), where WD is intentionally employed to deal with the noises. The parameter selection of PCA-WD is further formulated as an optimization problem; and PSO is employed for optimization solution. A FWTP, sustaining two 1000MW generation units in a coal-fired power plant, is taken as a study case. Its operation data is collected for following verification study. The results show that the optimized WD is effective to restrain the noises of T 2 and SPE statistics, so as to improve the performance of PCA-WD algorithm. And, the parameter optimization enables PCA-WD to get its optimal parameters in an automatic way rather than on individual experience. The optimized PCA-WD is further compared with classical PCA and sliding window PCA (SWPCA), in terms of four cases as bias fault, drift fault, broken line fault and normal condition, respectively. The advantages of the optimized PCA-WD, against classical PCA and SWPCA, is finally convinced with the results. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

  5. Noise processing by microRNA-mediated circuits: The Incoherent Feed-Forward Loop, revisited

    Directory of Open Access Journals (Sweden)

    Silvia Grigolon

    2016-04-01

    Full Text Available The intrinsic stochasticity of gene expression is usually mitigated in higher eukaryotes by post-transcriptional regulation channels that stabilise the output layer, most notably protein levels. The discovery of small non-coding RNAs (miRNAs in specific motifs of the genetic regulatory network has led to identifying noise buffering as the possible key function they exert in regulation. Recent in vitro and in silico studies have corroborated this hypothesis. It is however also known that miRNA-mediated noise reduction is hampered by transcriptional bursting in simple topologies. Here, using stochastic simulations validated by analytical calculations based on van Kampen's expansion, we revisit the noise-buffering capacity of the miRNA-mediated Incoherent Feed Forward Loop (IFFL, a small module that is widespread in the gene regulatory networks of higher eukaryotes, in order to account for the effects of intermittency in the transcriptional activity of the modulator gene. We show that bursting considerably alters the circuit's ability to control static protein noise. By comparing with other regulatory architectures, we find that direct transcriptional regulation significantly outperforms the IFFL in a broad range of kinetic parameters. This suggests that, under pulsatile inputs, static noise reduction may be less important than dynamical aspects of noise and information processing in characterising the performance of regulatory elements.

  6. Efficient co-conversion process of chicken manure into protein feed and organic fertilizer by Hermetia illucens L. (Diptera

    NARCIS (Netherlands)

    Xiao, Xiaopeng; Mazza, Lorenzo; Yu, Yongqiang; Cai, Minmin; Zheng, Longyu; Tomberlin, Jeffery K.; Yu, Jeffrey; Huis, van Arnold; Yu, Ziniu; Fasulo, Salvatore; Zhang, Jibin

    2018-01-01

    A chicken manure management process was carried out through co-conversion of Hermetia illucens L. larvae (BSFL) with functional bacteria for producing larvae as feed stuff and organic fertilizer. Thirteen days co-conversion of 1000 kg of chicken manure inoculated with one million 6-day-old BSFL and

  7. Short communication: Effects of processing methods of barley grain in starter diets on feed intake and performance of dairy calves.

    Science.gov (United States)

    Jarrah, A; Ghorbani, G R; Rezamand, P; Khorvash, M

    2013-01-01

    The present study was conducted to evaluate the effects of different processing methods of barley grain in starter rations on feed intake, average daily gain, feed efficiency, skeletal growth, fecal score, and rumen pH of dairy calves. Thirty-two Holstein dairy calves (16 female and 16 male) were randomly allocated to 1 of 4 treatments consisting of coarse ground, whole, steam-rolled, or roasted barley from d 4 to 56 of birth in a completely randomized design. Starter diets were formulated to have similar ingredients and composition. All calves had free access to water and feed throughout the study period and received 4 L of milk/d from a bottle from d 4 to 41, 2L/d from d 41 to 45, and weaning occurred on d 45. Feed intake and fecal score were recorded daily. Body weight and skeletal growth measures were recorded on d 4 (beginning of the study), 45, and 56. Rumen fluid and blood samples were collected on d 35, 45, and 56. Data were analyzed using PROC MIXED of SAS (SAS Institute Inc., Cary, NC). The results indicate that different methods of processing barley had no detectable effect on dry matter intake, average daily gain, and feed efficiency and that skeletal growth, health, and rumen pH were not affected by dietary treatments. In conclusion, the results show that different processing methods of barley included in starter diets had no detectable effect on the performance of dairy calves under our experimental conditions. Therefore, feeding whole or coarsely ground barley would be a more economical method compared with steam rolled or roasted barley. Copyright © 2013 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  8. Self-Assessment in the Evaluation Process.

    Science.gov (United States)

    Koehler, Michael

    1990-01-01

    Describes a four-step process to involve teachers in self-evaluation that results in performance ownership. When supervisors incorporate teacher self-assessments into classroom observation reports, teachers are more willing to engage in follow-up professional growth activities and perceive supervisors as helpers in the process. (MLH)

  9. Assessing the relationship between groundwater nitrate and animal feeding operations in Iowa (USA)

    Science.gov (United States)

    Zirkle, Keith W.; Nolan, Bernard T.; Jones, Rena R.; Weyer, Peter J.; Ward, Mary H.; Wheeler, David C.

    2016-01-01

    Nitrate-nitrogen is a common contaminant of drinking water in many agricultural areas of the United States of America (USA). Ingested nitrate from contaminated drinking water has been linked to an increased risk of several cancers, specific birth defects, and other diseases. In this research, we assessed the relationship between animal feeding operations (AFOs) and groundwater nitrate in private wells in Iowa. We characterized AFOs by swine and total animal units and type (open, confined, or mixed), and we evaluated the number and spatial intensities of AFOs in proximity to private wells. The types of AFO indicate the extent to which a facility is enclosed by a roof. Using linear regression models, we found significant positive associations between the total number of AFOs within 2 km of a well (p trend nitrate concentration. Additionally, we found significant increases in log nitrate in the top quartiles for AFO spatial intensity, open AFO spatial intensity, and mixed AFO spatial intensity compared to the bottom quartile (0.171 log(mg/L), 0.319 log(mg/L), and 0.541 log(mg/L), respectively; all p nitrate-nitrogen in drinking wells and found significant spatial clustering of high-nitrate wells (> 5 mg/L) compared with low-nitrate (≤ 5 mg/L) wells (p = 0.001). A generalized additive model for high-nitrate status identified statistically significant areas of risk for high levels of nitrate. Adjustment for some AFO predictor variables explained a portion of the elevated nitrate risk. These results support a relationship between animal feeding operations and groundwater nitrate concentrations and differences in nitrate loss from confined AFOs vs. open or mixed types.

  10. Assessing the strength and effectiveness of renewable electricity feed-in tariffs in European Union countries

    International Nuclear Information System (INIS)

    Jenner, Steffen; Groba, Felix; Indvik, Joe

    2013-01-01

    In the last two decades, feed-in tariffs (FIT) have emerged as one of the most popular policies for supporting renewable electricity (RES-E) generation. A few studies have assessed the effectiveness of RES-E policies, but most ignore policy design features and market characteristics (e.g. electricity price and production cost) that influence policy strength. We employ 1992–2008 panel data to conduct the first econometric analysis of the effectiveness of FIT policies in promoting solar photovoltaic (PV) and onshore wind power development in 26 European Union countries. We develop a new indicator for FIT strength that captures variability in tariff size, contract duration, digression rate, and electricity price and production cost to estimate the resulting return on investment. We regress this indicator on added RES-E capacity using a fixed effects specification and find that FIT policies have driven solar PV development in the EU. However, this effect is overstated without controlling for country characteristics and is concealed without accounting for policy design. We do not find robust evidence that FIT policies have driven wind power development. Overall, we show that the interaction of policy design, electricity price, and electricity production cost is a more important determinant of RES-E development than policy enactment alone. - Highlights: ► This is the first econometric study of feed-in tariff (FIT) efficacy in Europe. ► We test the impact of FIT's on photovoltaic (PV) and wind power from 1992 to 2008. ► We calculate country- and year-specific return on investment provided by each FIT. ► FIT policies increased PV installations by ∼0.5% per ROI percentage point. ► Policy design, market traits, and ROI are more important factors than policy alone.

  11. Do whole-food animal feeding studies have any value in the safety assessment of GM crops?

    Science.gov (United States)

    Herman, Rod A; Ekmay, Ricardo

    2014-02-01

    The use of whole-food (grain meal contained in feed) animal-feeding studies to support the safety assessment of genetically modified crops has been contentious. This may be, in part, a consequence of poorly agreed upon study objectives. Whole-food animal-feeding studies have been postulated to be useful in detecting both expected and unexpected effects on the composition of genetically modified crops. While the justification of animal feeding studies to detect unexpected effects may be inadequately supported, there may be better justification to conduct such studies in specific cases to investigate the consequences of expected compositional effects including expression of transgenic proteins. Such studies may be justified when (1) safety cannot reasonably be predicted from other evidence, (2) reasonable hypothesis for adverse effects are postulated, (3) the compositional component in question cannot be isolated or enriched in an active form for inclusion in animal feeding studies, and (4) reasonable multiples of exposure can be accomplished relative to human diets. The study design for whole-food animal-feeding studies should be hypotheses-driven, and the types of data collected should be consistent with adverse effects that are known to occur from dietary components of biological origin. Copyright © 2013 The Authors. Published by Elsevier Inc. All rights reserved.

  12. Systematic Development and Validation of a Theory-Based Questionnaire to Assess Toddler Feeding12

    OpenAIRE

    Hurley, Kristen M.; Pepper, M. Reese; Candelaria, Margo; Wang, Yan; Caulfield, Laura E.; Latta, Laura; Hager, Erin R.; Black, Maureen M.

    2013-01-01

    This paper describes the development and validation of a 27-item caregiver-reported questionnaire on toddler feeding. The development of the Toddler Feeding Behavior Questionnaire was based on a theory of interactive feeding that incorporates caregivers’ responses to concerns about their children’s dietary intake, appetite, size, and behaviors rather than relying exclusively on caregiver actions. Content validity included review by an expert panel (n = 7) and testing in a pilot sample (n = 10...

  13. A Genetic Algorithm for Feeding Trajectory Optimisation of Fed-batch Fermentation Processes

    Directory of Open Access Journals (Sweden)

    Stoyan Tzonkov

    2009-03-01

    Full Text Available In this work a genetic algorithm is proposed with the purpose of the feeding trajectory optimization during a fed-batch fermentation of E. coli. The feed rate profiles are evaluated based on a number of objective functions. Optimization results obtained for different feeding trajectories demonstrate that the genetic algorithm works well and shows good computational performance. Developed optimal feed profiles meet the defined criteria. The ration of the substrate concentration and the difference between actual cell concentration and theoretical maximum cell concentration is defined as the most appropriate objective function. In this case the final cell concentration of 43 g·l-1 and final product concentration of 125 g·l-1 are achieved and there is not significant excess of substrate.

  14. ASSESSMENT OF INFANT AND YOUNG CHILD FEEDING PRACTICES AMONG UNDER-3 YEARS CHILDREN IN URBAN SLUMS OF HUBBALLI CITY

    Directory of Open Access Journals (Sweden)

    Anjana P, Dattatreya D Bant

    2015-11-01

    Full Text Available Background: Malnutrition is a serious public health problem affecting the growth and development of children which have detrimental effect in later adolescent and adult life. Although Malnutrition is multifaceted problem, Infant and young child feeding practices by mothers is crucial for optimum growth and development of the children Objectives: 1 To Assess the Infant and Young child feeding practices followed by the Mothers. 2 To study the influence of feeding practices on weight of Under 3 years children. Methodology: Cross-sectional study conducted in an urban slum of Hubli. 110 mother-child pairs recruited , where the child was between 7 months to 3 years of age. Employed a pre-structured questionnaire as tool and Child’s Anthropometry done. Data presented as percentages and proportions. Chi square test is applied to test association between Feeding practices and underweight, P value less than 0.05 considered as significant. Results: 22.7 % mothers had Breast fed within recommended time following delivery, prelacteal feeding practices observed in 47.3 % and 37.3% followed Exclusively Breast Feeding. However Timely Initiation of complementary foods was seen only in 34.5%. Breast feeding continued in 47.3 % beyond 6 months. 53.6 % & 86.4% didn’t satisfy the Minimum meal frequency and dietary diversity respectively. 50.9% of children were Normal, 49.09% were Underweight. Conclusions: Nearly 50% of the children under this study were underweight. Mothers who had not Exclusively Breast fed for 6 months, not continued Breast feeding beyond 6 months and inadequate meal frequency of the child were significantly associated with underweight of the children.

  15. Environmental impact assessment: Process and implementation

    International Nuclear Information System (INIS)

    Chen, S.Y.; Tsai, S.Y.

    1989-01-01

    In this paper, the procedures and issues regarding the preparation of an environmental impact assessment in accordance with the National Environmental Policy Act (NEPA) as promulgated by the US Congress in 1969 are discussed. NEPA procedures and requirements are covered in general, while particular attention is given to the preparation of the environmental impact assessment. Also included is a discussion of the social impact assessment. The aim of the social impact assessment is to address the social issues involved in enhancing public understanding of the hazardous risks, thereby mitigating any conflicts that may arise in the NEPA process. 3 refs., 1 fig., 1 tab

  16. Performance assessment in algebra learning process

    Science.gov (United States)

    Lestariani, Ida; Sujadi, Imam; Pramudya, Ikrar

    2017-12-01

    The purpose of research to describe the implementation of performance assessment on algebra learning process. The subject in this research is math educator of SMAN 1 Ngawi class X. This research includes descriptive qualitative research type. Techniques of data collecting are done by observation method, interview, and documentation. Data analysis technique is done by data reduction, data presentation, and conclusion. The results showed any indication that the steps taken by the educator in applying the performance assessment are 1) preparing individual worksheets and group worksheets, 2) preparing rubric assessments for independent worksheets and groups and 3) making performance assessments rubric to learners’ performance results with individual or groups task.

  17. DDT in fishes from four different Amazon sites: exposure assessment for breast feeding infants

    Energy Technology Data Exchange (ETDEWEB)

    D' Amato, C.; Torres, J.P.; Malm, O. [Lab. de Radioisotopos Eduardo Penna Franca, Inst. de Biofisica, UFRJ, RJ (Brazil); Bastos, W. [Lab. de Biogeoquimica, UNIR, Porto Velho (Brazil); Claudio, L.; Markowitz, S. [International Training Program on Environmental and Occupational Health, Mount Sinai School of Medicine, Queens Coll., NY (United States)

    2004-09-15

    Concerning DDT in food, based on clinical observations as well as experimental animals, the annual Joint FAO/WHO Meetings on Pesticide Residues held in 2000 estimated a Provisional Tolerable Daily Intake (PTDI) for DDT in 0.01 mg/kg/day. Marien and Laflamme have proposed a Tolerable Daily Intake (TDI) for breast feedings infants of 5 x 10{sup -3} mg/kg/day, and conducted an assessment to evaluate the public health significance of eating {sigma}ODDT contaminated fish, accomplished by establishing a daily intake level of DDT for the population of greatest concern, like breastfeeding infants. Their results indicated that mothers who frequently consume contaminated fish could have breast milk DDT concentrations highly enough to expose their infants to levels above the TDI. The aim of this study was to evaluate the ODDT (o,p'-DDT + p,p'-DDT + o,p'-DDE + p,p'-DDE + o,p'-DDD) levels in commercial fish samples from distinct Brazilian Amazon sites, which are consumed by the riverine populations, and to assess the potential health impacts from eating these fishes, especially for breastfeeding infants.

  18. Growth and development of male "little" mice assessed with Parks' theory of feeding and growth.

    Science.gov (United States)

    Puche, Rodolfo C; Alloatti, Rosa; Chapo, Gustavo

    2002-01-01

    This work was designed to characterize the appetite kinetics and growth of male C57BL/6J (lit) mice. Those variables were assessed with Parks' function of ad libitum feeding and growth. Heterozygous mice (lit/+) attained their mature weight at 12-15 weeks of age, peak growth rate (3.5 g/week) at 5 weeks and displayed the normal decay of food conversion efficiency as a function of age. The homozygous genotype has a chronic defect in the synthesis and secretion of growth hormone (GH). Homozygous mice could not be assessed with Park's function. From the 4th to the 15th week of age, body weight increased linearly and exhibited constant food conversion efficiency. Food intake of both genotypes was commensurate with their body weights. Lit/lit mice became progressively obese. At 40 weeks of age, body fat of lit/lit mice was fivefold that of lit/+ and their body weight was similar to their heterozygous controls. The chronic deficiency of growth hormone produced a lower bone mass (compared to heterozygous controls). Bone mass of both genotypes attained maturity at 12-15 weeks with a maximum growth rate at 5 weeks. Body weight and bone mass grow harmoniously in lit/+ but not in lit/lit mice.

  19. Assessment of the feed-in tariff mechanism for renewable energies in Taiwan

    International Nuclear Information System (INIS)

    Huang, Yun-Hsun; Wu, Jung-Hua

    2011-01-01

    Due to Taiwan's lack of natural resources, dependence on imported energy, and pursuit of sustainable development, renewable energies are extremely important for Taiwan's future energy supply. Since Taiwan's feed-in tariff (FIT) is still in its initial stage, one must examine whether the current system is compatible with a well-designed FIT scheme. This study examines the main features of Taiwan's FIT system and assesses design options using several criteria. Additionally, one of the most important elements of a FIT scheme, namely, a tariff system, is discussed. Taiwan's FIT scheme has the design options required by well-functioning FITs, and the guaranteed-return tariff system coincides with the spirit underlying leading global FITs; however, many issues, such as setting goals by stages, refinement of the tariff calculation methodology, and elimination of other non-economic barriers, must be addressed to achieve future developmental goals and green industry growth. - Highlights: ► No in-depth study has focused exclusively on Taiwan's FIT design options. ► This study fills this gap in the literature by examining Taiwan's FIT system. ► Assessments demonstrate that Taiwan's FIT scheme has the design options required by well-functioning FITs. ► Four issues are identified that Taiwan's policy makers should address to achieve future developmental goals and expand green industries.

  20. Emotional Feeding and Emotional Eating: Reciprocal Processes and the Influence of Negative Affectivity

    OpenAIRE

    Steinsbekk, Silje; Barker, Edward D.; Llewellyn, Clare; Fildes, Alison; Wichstrøm, Lars

    2017-01-01

    Emotional eating, that is, eating more in response to negative mood, is often seen in children. But the origins of emotional eating remain unclear. In a representative community sample of Norwegian 4-year-olds followed up at ages 6, 8, and 10 years (analysis sample: n = 801), one potential developmental pathway was examined: a reciprocal relation between parental emotional feeding and child emotional eating. The results revealed that higher levels of emotional feeding predicted higher levels ...

  1. RELEVANCE OF PROCESS RISK ASSESSMENT IN AIRLINES

    Directory of Open Access Journals (Sweden)

    Oksana G. Feoktistova

    2017-01-01

    Full Text Available The notion of “the concept on assumed risk” that took over from the outdated concept of absolute security is analyzed, the increasing significance of operating risk assessment at the present stage is noted. Some basic risk assessment techniques are considered. Matrix technique of risk assessment is considered more thoroughly, and it may be used in risk assessment of airlines in the context of labour protection management system.The ability to correctly assess risks and develop appropriate precautionary measures will allow airlines to avoid incidents leading to drastic consequences for staff, as well as to direct and indirect costs for the enterprise among which there could be singled out both direct property damage and loss of profit and expenses connected to incident investigation, penalty and compensation payment, loss of business reputation and so on. To reduce the rate of accidents and to develop safe activities skills for airlines staff a risk assessment chart is supposed to be implemented, which will be an efficient accidents prevention involving the staff in the process and making them follow safe working conditions.Process risk assessment is an integral part of assessment of the whole enterprise activity and work efficiency of a department and particular workers evaluation system. Labour protection activity should be based on risk identification and its control. Risk assessment is a keystone of labour protection activity planning.

  2. A fish-feeding laboratory bioassay to assess the antipredatory activity of secondary metabolites from the tissues of marine organisms.

    Science.gov (United States)

    Marty, Micah J; Pawlik, Joseph R

    2015-01-11

    Marine chemical ecology is a young discipline, having emerged from the collaboration of natural products chemists and marine ecologists in the 1980s with the goal of examining the ecological functions of secondary metabolites from the tissues of marine organisms. The result has been a progression of protocols that have increasingly refined the ecological relevance of the experimental approach. Here we present the most up-to-date version of a fish-feeding laboratory bioassay that enables investigators to assess the antipredatory activity of secondary metabolites from the tissues of marine organisms. Organic metabolites of all polarities are exhaustively extracted from the tissue of the target organism and reconstituted at natural concentrations in a nutritionally appropriate food matrix. Experimental food pellets are presented to a generalist predator in laboratory feeding assays to assess the antipredatory activity of the extract. The procedure described herein uses the bluehead, Thalassoma bifasciatum, to test the palatability of Caribbean marine invertebrates; however, the design may be readily adapted to other systems. Results obtained using this laboratory assay are an important prelude to field experiments that rely on the feeding responses of a full complement of potential predators. Additionally, this bioassay can be used to direct the isolation of feeding-deterrent metabolites through bioassay-guided fractionation. This feeding bioassay has advanced our understanding of the factors that control the distribution and abundance of marine invertebrates on Caribbean coral reefs and may inform investigations in diverse fields of inquiry, including pharmacology, biotechnology, and evolutionary ecology.

  3. The probabilistic model of the process mixing of animal feed ingredients into a continuous mixer-reactor

    OpenAIRE

    L. I. Lytkina; A. A. Shevtsov; E. S. Shentsova; O. A. Apalikhina

    2016-01-01

    A mathematical model of the polydisperse medium mixing process reflects its stochastic features in the form of uneven distribution of phase elements on the time of their presence in apparatus, particle size, ripple retention of the apparatus, random distribution of the material and thermal phase flows of the working volume, heterogeneity of the medium physical- and chemical properties, complicated by chemical reaction. For the mathematical description of the mixing process of animal feed ingr...

  4. Ecological assessment of the Tajan river using feeding groups of benthic macroinvertebrates and biotic indices

    Directory of Open Access Journals (Sweden)

    M Sharifinia

    2012-06-01

    Full Text Available One of the best practical methods to understand ecological status of a water body and determine impacts of human intervention in reducing water quality is using benthic macroinvertebrates as assessment tools for monitoring their biological integrity and health. The Tajan River is one of the rivers of Caspian Southernsub-basin that drains the Caspian Sea. Macroinvertebrate samples were taken using Surber’s sampler (40 x 40 cm and 100µ mesh size in 45 day intervals with 3 replicates in each sampling site for a period of one year (May 2010 to May 2011. The collected organisms were preserved in 4% formalin solution and transferred to the laboratory for identification and counting. Six different functional feeding groups of macroinvertebrate e.g. Collector-gathering, Collector-filtering, Predator, Collector-gathering /Scraper, Predator/Collector-gathering and Scraper were determined. Feeding groups of Collector-gathering, Collector-filtering and Collector-gathering /Scraper were relatively dominant in comparison to other groups. Groups of Collector-filtering and Collector-gathering were dominant in slightly and heavily polluted stations, respectively. In this study population structure measures including abundance, EPT percent and the EPT and EPT/CHIR indics were mearsured. Species diversity, species richness were also determined using Shannon- Weiner, Margalef and Jacardindics. The minimum and maximum values of Hilsenhoff biotic index were observedin stations 1 (4.29 and 5 (5.57, respectively. Moreover, the highest and lowest values of BMWP/ASPT were observed in station 1 (4.51 and 5 (3.25, respectively. Evaluation of indicators revealed less water quality at stations 2, 3 and 5 which located at the lowermost of fish farms and effluent of factory. This reduction might be implicated to the effluents of water damps from fish farms running into the stream as diversity and total abundance (% of sociable macroinvertebrates decreased and that of

  5. Development and Application of a Probabilistic Risk-Benefit Assessment Model for Infant Feeding Integrating Microbiological, Nutritional, and Chemical Components.

    Science.gov (United States)

    Boué, Géraldine; Cummins, Enda; Guillou, Sandrine; Antignac, Jean-Philippe; Le Bizec, Bruno; Membré, Jeanne-Marie

    2017-12-01

    A probabilistic and interdisciplinary risk-benefit assessment (RBA) model integrating microbiological, nutritional, and chemical components was developed for infant milk, with the objective of predicting the health impact of different scenarios of consumption. Infant feeding is a particular concern of interest in RBA as breast milk and powder infant formula have both been associated with risks and benefits related to chemicals, bacteria, and nutrients, hence the model considers these three facets. Cronobacter sakazakii, dioxin-like polychlorinated biphenyls (dl-PCB), and docosahexaenoic acid (DHA) were three risk/benefit factors selected as key issues in microbiology, chemistry, and nutrition, respectively. The present model was probabilistic with variability and uncertainty separated using a second-order Monte Carlo simulation process. In this study, advantages and limitations of undertaking probabilistic and interdisciplinary RBA are discussed. In particular, the probabilistic technique was found to be powerful in dealing with missing data and to translate assumptions into quantitative inputs while taking uncertainty into account. In addition, separation of variability and uncertainty strengthened the interpretation of the model outputs by enabling better consideration and distinction of natural heterogeneity from lack of knowledge. Interdisciplinary RBA is necessary to give more structured conclusions and avoid contradictory messages to policymakers and also to consumers, leading to more decisive food recommendations. This assessment provides a conceptual development of the RBA methodology and is a robust basis on which to build upon. © 2017 Society for Risk Analysis.

  6. Assessing an Infant Feeding Web Site as a Nutrition Education Tool for Child Care Providers

    Science.gov (United States)

    Clark, Alena; Anderson, Jennifer; Adams, Elizabeth; Baker, Susan; Barrett, Karen

    2009-01-01

    Objective: Determine child care providers' infant feeding knowledge, attitude and behavior changes after viewing the infant feeding Web site and determine the effectiveness of the Web site and bilingual educational materials. Design: Intervention and control groups completed an on-line pretest survey, viewed a Web site for 3 months, and completed…

  7. Neglect of lactation stage leads to naive assessment of residual feed intake in dairy cattle

    DEFF Research Database (Denmark)

    Li, Bingjie; Berglund, B.; Fikse, W.F.

    2017-01-01

    Residual feed intake (RFI) is a candidate trait for feed efficiency in dairy cattle. We investigated the influence of lactation stage on the effect of energy sinks in defining RFI and the genetic parameters for RFI across lactation stages for primiparous dairy cattle. Our analysis included 747 pr...

  8. Enhancing the ecological risk assessment process.

    Science.gov (United States)

    Dale, Virginia H; Biddinger, Gregory R; Newman, Michael C; Oris, James T; Suter, Glenn W; Thompson, Timothy; Armitage, Thomas M; Meyer, Judith L; Allen-King, Richelle M; Burton, G Allen; Chapman, Peter M; Conquest, Loveday L; Fernandez, Ivan J; Landis, Wayne G; Master, Lawrence L; Mitsch, William J; Mueller, Thomas C; Rabeni, Charles F; Rodewald, Amanda D; Sanders, James G; van Heerden, Ivor L

    2008-07-01

    The Ecological Processes and Effects Committee of the US Environmental Protection Agency Science Advisory Board conducted a self-initiated study and convened a public workshop to characterize the state of the ecological risk assessment (ERA), with a view toward advancing the science and application of the process. That survey and analysis of ERA in decision making shows that such assessments have been most effective when clear management goals were included in the problem formulation; translated into information needs; and developed in collaboration with decision makers, assessors, scientists, and stakeholders. This process is best facilitated when risk managers, risk assessors, and stakeholders are engaged in an ongoing dialogue about problem formulation. Identification and acknowledgment of uncertainties that have the potential to profoundly affect the results and outcome of risk assessments also improves assessment effectiveness. Thus we suggest 1) through peer review of ERAs be conducted at the problem formulation stage and 2) the predictive power of risk-based decision making be expanded to reduce uncertainties through analytical and methodological approaches like life cycle analysis. Risk assessment and monitoring programs need better integration to reduce uncertainty and to evaluate risk management decision outcomes. Postdecision audit programs should be initiated to evaluate the environmental outcomes of risk-based decisions. In addition, a process should be developed to demonstrate how monitoring data can be used to reduce uncertainties. Ecological risk assessments should include the effects of chemical and nonchemical stressors at multiple levels of biological organization and spatial scale, and the extent and resolution of the pertinent scales and levels of organization should be explicitly considered during problem formulation. An approach to interpreting lines of evidence and weight of evidence is critically needed for complex assessments, and it would

  9. ARIES: Further description of its assessment process

    International Nuclear Information System (INIS)

    Rabago, I.; Sierra, I.; Vidania, R.

    1993-01-01

    ARIES is an integrated system designed in order to facilitate the effects assessment produced by accidental release of toxic chemicals. ARIES has been developed for inhalation exposures to estimate short term consequences over the exposed population. ARIES works with mathematical algorithms and is complemented with an additional system that executes the selection of relevant information, giving and additional support to the assessment. ARIES Methodology is based, on one side, in the development of a system of mathematical models joint sequentially in order to obtain a quick answer about the severity of the expected human effects as a function of the toxic concentration released to the environment (Quantitative process), and on the other side in the analysis and optimisation of the contrasted existing information about chemicals toxicity (Qualitative process). Both processes are sequential and complementary. ARIES methodology is physically supported by an informatic system. ARIES works with relational databases and mathematical algorithms programmed in dbase/sql language which let relate the above process, and furthermore add or incorporate progressively new models or complementary information. It has been developed a first prototype PC's of ARIES including several products of 82/505/EEC Directive. In a previous report we described the systems as a whole, and specially, their qualitative step. This report is directed to describe the quantitative assessment process of the system, specifically those aspects included in the present version of the prototype. Developed parts of quantitative steps are designed for situations in which only basic data like TLV's, DL, etc., are available for the assessment

  10. Process waste assessment for the Radiography Laboratory

    International Nuclear Information System (INIS)

    Phillips, N.M.

    1994-07-01

    This Process Waste Assessment was conducted to evaluate the Radiography Laboratory, located in Building 923. It documents the processes, identifies the hazardous chemical waste streams generated by these processes, recommends possible ways to minimize waste, and serves as a reference for future assessments of this facility. The Radiography Laboratory provides film radiography or radioscopy (electronic imaging) of weapon and nonweapon components. The Radiography Laboratory has six x-ray machines and one gamma ray source. It also has several other sealed beta- and gamma-ray isotope sources of low microcurie (μCi) activity. The photochemical processes generate most of the Radiography Laboratory's routinely generated hazardous waste, and most of that is generated by the DuPont film processor. Because the DuPont film processor generates the most photochemical waste, it was selected for an estimated material balance

  11. High risk process control system assessment methodology

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Venetia [Pontificia Universidade Catolica do Rio de Janeiro (PUC-Rio), RJ (Brazil); Zamberlan, Maria Cristina [National Institute of Tehnology (INT), Rio de Janeiro, RJ (Brazil). Human Reliability and Ergonomics Research Group for the Oil, Gas and Energy Sector

    2009-07-01

    The evolution of ergonomics methodology has become necessary due to the dynamics imposed by the work environment, by the increase of the need of human cooperation and by the high interaction between various sections within a company. In the last 25 years, as of studies made in the high risk process control, we have developed a methodology to evaluate these situations that focus on the assessment of activities and human cooperation, the assessment of context, the assessment of the impact of work of other sectors in the final activity of the operator, as well as the modeling of existing risks. (author)

  12. Assessment of the effects rejections of feed fish on water resources.: (Ouedoumerrbia, Morocco)

    Science.gov (United States)

    Ouaissa, Khadija; Kritihi, Assia; Oumessoud, Youness; Maychal, Abdelaziz; Hasnaoui, Mustapha

    2018-05-01

    In order to compare the effects of three types of extruded food (A, B and C) on the growth of rainbow trout, an experimental test was conducted on June 15, 2015 at a rainbow trout farming station near river of Oumerrrabi .Morocco. The comparison of three foods of different composition and energy is performed in isoenergetic conditions. Six basins were used for this comparative test. These basins are fed with fresh water according to the open circuit with a renewal of twice an hour. The initial feeding conditions were the same for the three food types and the initial density of 1, 58 kg/m3 (kg by volume) and an initial flow rate of 1, 04 m3/h. Fish are fed by ratios two to three times a day depending on the magnification stage. The sampling frequency is fortnightly, where we measure the zootechnical performance of fish and collect water samples for physicochemical analyses in order to assess the quality of the water leaving in the basins before their discharge into the river of Oum Er-Rbia. The comparative trial of three fish foods (A, B, and C) revealed that diet B is the better formulation reflected by the zootechnical performances and low phosphate release than diet A and C.

  13. Assessment of Process Robustness for Mass Customization

    DEFF Research Database (Denmark)

    Nielsen, Kjeld; Brunø, Thomas Ditlev

    2013-01-01

    robustness and their capability to develop it. Through literature study and analysis of robust process design characteristics a number of metrics are described which can be used for assessment. The metrics are evaluated and analyzed to be applied as KPI’s to help MC companies prioritize efforts in business...

  14. Integrated modeling and analysis of ball screw feed system and milling process with consideration of multi-excitation effect

    Science.gov (United States)

    Zhang, Xing; Zhang, Jun; Zhang, Wei; Liang, Tao; Liu, Hui; Zhao, Wanhua

    2018-01-01

    The present researches about feed drive system and milling process are almost independent with each other, and ignore the interaction between the two parts, especially the influence of nonideal motion of feed drive system on milling process. An integrated modeling method of ball screw feed system and milling process with multi-excitation effect is proposed in this paper. In the integrated model, firstly an analytical model of motor harmonic torque with consideration of asymmetrical drive circuit and asymmetrical permanent magnet is given. Then, the numerical simulation procedure of cutter/workpiece engagement during milling process with displacement fluctuation induced by harmonic torque is put forward, which is followed by the solving flow for the proposed integrated model. Based on the integrated model, a new kind of quality defect shown as contour low frequency oscillation on machined surface is studied by experiments and simulations. The results demonstrate that the forming mechanism of the contour oscillation can be ascribed to the multi-excitation effect with motor harmonic torque and milling force. Moreover, the influence of different milling conditions on the contour oscillation characteristics, particularly on surface roughness, are further discussed. The results indicate that it is necessary to explain the cause of the new kind of quality defect with a view of system integration.

  15. Advancing the Assessment of Dynamic Psychological Processes.

    Science.gov (United States)

    Wright, Aidan G C; Hopwood, Christopher J

    2016-08-01

    Most commonly used clinical assessment tools cannot fully capture the dynamic psychological processes often hypothesized as core mechanisms of psychopathology and psychotherapy. There is therefore a gap between our theories of problems and interventions for those problems and the tools we use to understand clients. The purpose of this special issue is to connect theory about clinical dynamics to practice by focusing on methods for collecting dynamic data, statistical models for analyzing dynamic data, and conceptual schemes for implementing dynamic data in applied settings. In this introductory article, we argue for the importance of assessing dynamic processes, highlight recent advances in assessment science that enable their measurement, review challenges in using these advances in applied practice, and adumbrate the articles in this issue.

  16. Assessment and Development of Engineering Design Processes

    DEFF Research Database (Denmark)

    Ulrikkeholm, Jeppe Bjerrum

    , the engineering companies need to have efficient engineering design processes in place, so they can design customised product variants faster and more efficiently. It is however not an easy task to model and develop such processes. To conduct engineering design is often a highly iterative, illdefined and complex...... the process can be fully understood and eventually improved. Taking its starting point in this proposition, the outcome of the research is an operational 5-phased procedure for assessing and developing engineering design processes through integrated modelling of product and process, designated IPPM......, and eventually the results are discussed, overall conclusions are made and future research is proposed. The results produced throughout the research project are developed in close collaboration with the Marine Low Speed business unit within the company MAN Diesel & Turbo. The business unit is the world market...

  17. CHARACTERIZATION OF A PRECIPITATE REACTOR FEED TANK (PRFT) SAMPLE FROM THE DEFENSE WASTE PROCESSING FACILITY (DWPF)

    Energy Technology Data Exchange (ETDEWEB)

    Crawford, C.; Bannochie, C.

    2014-05-12

    A sample of from the Defense Waste Processing Facility (DWPF) Precipitate Reactor Feed Tank (PRFT) was pulled and sent to the Savannah River National Laboratory (SRNL) in June of 2013. The PRFT in DWPF receives Actinide Removal Process (ARP)/ Monosodium Titanate (MST) material from the 512-S Facility via the 511-S Facility. This 2.2 L sample was to be used in small-scale DWPF chemical process cell testing in the Shielded Cells Facility of SRNL. A 1L sub-sample portion was characterized to determine the physical properties such as weight percent solids, density, particle size distribution and crystalline phase identification. Further chemical analysis of the PRFT filtrate and dissolved slurry included metals and anions as well as carbon and base analysis. This technical report describes the characterization and analysis of the PRFT sample from DWPF. At SRNL, the 2.2 L PRFT sample was composited from eleven separate samples received from DWPF. The visible solids were observed to be relatively quick settling which allowed for the rinsing of the original shipping vials with PRFT supernate on the same day as compositing. Most analyses were performed in triplicate except for particle size distribution (PSD), X-ray diffraction (XRD), Scanning Electron Microscopy (SEM) and thermogravimetric analysis (TGA). PRFT slurry samples were dissolved using a mixed HNO3/HF acid for subsequent Inductively Coupled Plasma Atomic Emission Spectroscopy (ICPAES) and Inductively Coupled Plasma Mass Spectroscopy (ICP-MS) analyses performed by SRNL Analytical Development (AD). Per the task request for this work, analysis of the PRFT slurry and filtrate for metals, anions, carbon and base were primarily performed to support the planned chemical process cell testing and to provide additional component concentrations in addition to the limited data available from DWPF. Analysis of the insoluble solids portion of the PRFT slurry was aimed at detailed characterization of these solids (TGA, PSD

  18. New approach for the quantification of processed animal proteins in feed using light microscopy.

    Science.gov (United States)

    Veys, P; Baeten, V

    2010-07-01

    A revision of European Union's total feed ban on animal proteins in feed will need robust quantification methods, especially for control analyses, if tolerance levels are to be introduced, as for fishmeal in ruminant feed. In 2006, a study conducted by the Community Reference Laboratory for Animal Proteins in feedstuffs (CRL-AP) demonstrated the deficiency of the official quantification method based on light microscopy. The study concluded that the method had to be revised. This paper puts forward an improved quantification method based on three elements: (1) the preparation of permanent slides with an optical adhesive preserving all morphological markers of bones necessary for accurate identification and precision counting; (2) the use of a counting grid eyepiece reticle; and (3) new definitions for correction factors for the estimated portions of animal particles in the sediment. This revised quantification method was tested on feeds adulterated at different levels with bovine meat and bone meal (MBM) and fishmeal, and it proved to be effortless to apply. The results obtained were very close to the expected values of contamination levels for both types of adulteration (MBM or fishmeal). Calculated values were not only replicable, but also reproducible. The advantages of the new approach, including the benefits of the optical adhesive used for permanent slide mounting and the experimental conditions that need to be met to implement the new method correctly, are discussed.

  19. Effect of feeding processed Cassia tora seed based diets on growth ...

    African Journals Online (AJOL)

    The effects of feeding Cassia tora seed based diets on the growth performance and biochemical parameters of growing rabbits over a 10 week period was investigated. Four dietary treatments were formulated such that diets 1, 2, 3, and 4 contained 0, 5, 10 and 15% Cassia tora seeds, respectively. Forty-eight mixed breeds ...

  20. Assessment of Process Monitoring Techniques for Pyro processing Safeguards

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Y. E.; Kim, C. M.; Yim, M. S. [KAIST, Daejeon (Korea, Republic of)

    2016-05-15

    PM technologies can be used to inspect normal/off-normal operation with various data obtained from facility operations in real time to meet safeguards objectives. To support the use of PM technologies for the purpose of pyroprocessing safeguards, this study aims at identifying technologies that could be useful for PM purposes and evaluating their applicability to a pyroprocessing facility. This paper describes the development of the assessment criteria to evaluate the practicality of candidate technologies for PM based on a variety of requirements and considerations. By using the developed assessment criteria, application of technologies in the oxide reduction process was assessed as a test case example. Research is necessary to validate the criteria according to the needs of each unit process, perhaps based on expert elicitation and/or international collaboration with other expert organization(s). These advanced assessment criteria will serve a useful guideline for selecting appropriate candidate PM technologies for pyroprocessing safeguards. Based on the results of using these evaluation criteria, the optimum technologies can be successfully selected for use at a large scale pyroprocessing facility.

  1. An Assessment of Subsurface Intake Systems: Planning and Impact on Feed Water Quality for SWRO Facilities

    KAUST Repository

    Dehwah, Abdullah

    2017-01-01

    Subsurface intake systems are known to improve the feed water quality for SWRO plants. However, a little is known about the feasibility of implementation in coastal settings, the degree of water quality improvements provided by these systems

  2. Eating nanomaterials: cruelty-free and safe? the EFSA guidance on risk assessment of nanomaterials in food and feed.

    Science.gov (United States)

    Sauer, Ursula G

    2011-12-01

    Nanomaterials are increasingly being added to food handling and packaging materials, or directly, to human food and animal feed. To ensure the safety of such engineered nanomaterials (ENMs), in May 2011, the European Food Safety Authority (EFSA) published a guidance document on Risk assessment of the application of nanoscience and nanotechnologies in the food and feed chain. It states that risk assessment should be performed by following a step-wise procedure. Whenever human or animal exposure to nanomaterials is expected, the general hazard characterisation scheme requests information from in vitro genotoxicity, toxicokinetic and repeated dose 90-day oral toxicity studies in rodents. Numerous prevailing uncertainties with regard to nanomaterial characterisation and their hazard and risk assessment are addressed in the guidance document. This article discusses the impact of these knowledge gaps on meeting the goal of ensuring human safety. The EFSA's guidance on the risk assessment of ENMs in food and animal feed is taken as an example for discussion, from the point of view of animal welfare, on what level of uncertainty should be considered acceptable for human safety assessment of products with non-medical applications, and whether animal testing should be considered ethically acceptable for such products.

  3. Postural risk assessment of mechanised firewood processing.

    Science.gov (United States)

    Spinelli, Raffaele; Aminti, Giovanni; De Francesco, Fabio

    2017-03-01

    The study assessed the postural risk of mechanised firewood processing with eight machines, representing the main technology solutions available on the market. Assessment was conducted with the Ovako Working posture Analysis System (OWAS) on 1000 still frames randomly extracted from videotaped work samples. The postural risk associated with firewood processing was variable and associated with technology type. Simple, manually operated new machines incurred a higher postural risk compared with semi- or fully automatic machines. In contrast, new semi-automatic and automatic machines were generally free from postural risk. In all cases, attention should be paid to postural risk that may occur during blockage resolution. The study did not cover the postural risk of firewood processing sites as a whole. The study provided useful information for selecting firewood processing machinery and for improving firewood machinery design, as part of a more articulate strategy aimed at enhancing the safety of firewood processing work sites. Practitioner Summary: The postural risk associated with mechanised firewood processing (eg cutting and splitting) depends on the type of equipment. Postural risk is highest (OWAS Action Category 2) with new in-line machines, designed for operation by a single worker. Fully automatic machines present minimum postural risk, except during blockage resolution.

  4. ARIES: Further description of its Assessment Process

    Energy Technology Data Exchange (ETDEWEB)

    Rabago, I.; Sierra, I.; Vidania, R. de

    1993-07-01

    ARIES* is an integrated system designed in order to facilitate the effects assessment produced by accidental release of toxic chemicals. ARIES has been developed for inhalation exposures to estimate short term consequences over the exposed population. ARIES works with mathematical algorithms and is complemented with an additional system that executes the selection of relevant information, giving an additional support to the assessment. ARIES Methodology is based, on one side, in the development of a system of mathematical models joint sequentially in order to obtain a quick answer about the severity of the expected human effects as a function of the toxic concentration released to the environment (Quantitative process), and on the other side in the analysis and optimization of the contrasted existing information about chemicals toxicity (Qualitative process). Both processes are sequential and complementary. ARIES methodology is physically supported by an informatics system. ARIES works with relational databases and mathematical algorithms programmed in dbase/SQL language which let relate the above process, and furthermore add or incorporate progressively new models or complementary information. It has been developed a first prototype PC's of ARIES including several products of 82/505/EEC Directive. In a previous report we described the system as a whole, and specially, their qualitative step. This report is directed to describe the quantitative assessment process of the system, specifically those aspects included in the present version of the prototype. Developed parts of quantitative steps are designed for situations in which only basic data like TLV's, DL, etc., are available for the assessment. (Author) 8 refs.

  5. ARIES: Further description of its Assessment Process

    International Nuclear Information System (INIS)

    Rabago, I.; Sierra, I.; Vidania, R. de

    1993-01-01

    ARIES* is an integrated system designed in order to facilitate the effects assessment produced by accidental release of toxic chemicals. ARIES has been developed for inhalation exposures to estimate short term consequences over the exposed population. ARIES works with mathematical algorithms and is complemented with an additional system that executes the selection of relevant information, giving an additional support to the assessment. ARIES Methodology is based, on one side, in the development of a system of mathematical models joint sequentially in order to obtain a quick answer about the severity of the expected human effects as a function of the toxic concentration released to the environment (Quantitative process), and on the other side in the analysis and optimization of the contrasted existing information about chemicals toxicity (Qualitative process). Both processes are sequential and complementary. ARIES methodology is physically supported by an informatics system. ARIES works with relational databases and mathematical algorithms programmed in dbase/SQL language which let relate the above process, and furthermore add or incorporate progressively new models or complementary information. It has been developed a first prototype PC's of ARIES including several products of 82/505/EEC Directive. In a previous report we described the system as a whole, and specially, their qualitative step. This report is directed to describe the quantitative assessment process of the system, specifically those aspects included in the present version of the prototype. Developed parts of quantitative steps are designed for situations in which only basic data like TLV's, DL, etc., are available for the assessment. (Author) 8 refs

  6. Consumption of highly processed snacks, sugar-sweetened beverages and child feeding practices in a rural area of Nicaragua.

    Science.gov (United States)

    Contreras, Mariela; Zelaya Blandón, Elmer; Persson, Lars-Åke; Ekström, Eva-Charlotte

    2016-01-01

    Appropriate feeding behaviours are important for child growth and development. In societies undergoing nutrition transition, new food items are introduced that may be unfavourable for child health. Set in rural Nicaragua, the aim of this study was to describe the infant and young child feeding (IYCF) practices as well as the consumption of highly processed snack foods (HP snacks) and sugar-sweetened beverages (SSBs). All households with at least one child 0- to 35-month-old (n = 1371) were visited to collect information on current IYCF practices in the youngest child as well as consumption of SSBs and HP snacks. Breastfeeding was dominant (98%) among 0- to 1-month-olds and continued to be prevalent (60%) in the second year, while only 34% of the 0- to 5-month-olds were exclusively breastfed. Complementary feeding practices were deemed acceptable for only 59% of the 6- to 11-month-old infants, with low dietary diversity reported for 50% and inadequate meal frequency reported for 30%. Consumption of HP snacks and SSBs was frequent and started early; among 6- to 8-month-olds, 42% and 32% had consumed HP snacks and SSBs, respectively. The difference between the observed IYCF behaviours and World Health Organization recommendations raises concern of increased risk of infections and insufficient intake of micronutrients that may impair linear growth. The concurrent high consumption of SSBs and HP snacks may increase the risk of displacing the recommended feeding behaviours. To promote immediate and long-term health, growth and development, there is a need to both promote recommended IYCF practices as well as discourage unfavourable feeding behaviours. © 2014 John Wiley & Sons Ltd.

  7. My child at mealtime: A visually enhanced self-assessment of feeding styles for low-income parents of preschoolers.

    Science.gov (United States)

    Ontai, Lenna L; Sitnick, Stephanie L; Shilts, Mical K; Townsend, Marilyn S

    2016-04-01

    The importance of caregiver feeding styles on children's dietary outcomes is well documented. However, the instruments used to assess feeding style are limited by high literacy demands, making selfassessment with low-income audiences challenging. The purpose of the current study is to report on the development of My Child at Mealtime (MCMT), a self-assessment tool with reduced literacy demands, designed to measure feeding styles with parents of preschool-aged children. Cognitive interviews were conducted with 44 Head Start parents of 2-5 year old children to develop question wording and identify appropriate visuals. The resulting tool was administered to 119 ethnically diverse, low-income parents of 2-5 year old children. Factor analysis resulted in a two-factor structure that reflects responsiveness and demandingness in a manner consistent with existing assessment tools. Results indicate the final visually enhanced MCMT self-assessment tool provides a measure of parenting style consistent with existing measures, while reducing the literacy demand. Copyright © 2016 Elsevier Ltd. All rights reserved.

  8. Service Quality and Process Maturity Assessment

    Directory of Open Access Journals (Sweden)

    Serek Radomir

    2013-12-01

    Full Text Available This article deals with service quality and the methods for its measurement and improvements to reach the so called service excellence. Besides older methods such as SERVQUAL and SERPERF, there are also shortly described capability maturity models based on which the own methodology is developed and used for process maturity assessment in organizations providing technical services. This method is equally described and accompanied by examples on pictures. The verification of method functionality is explored on finding a correlation between service employee satisfaction and average process maturity in a service organization. The results seem to be quite promising and open an arena for further studies.

  9. Performance assessment modeling of pyrometallurgical process wasteforms

    International Nuclear Information System (INIS)

    Nutt, W.M.; Hill, R.N.; Bullen, D.B.

    1995-01-01

    Performance assessment analyses have been completed to estimate the behavior of high-level nuclear wasteforms generated from the pyrometallurgical processing of liquid metal reactor (LMR) and light water reactor (LWR) spent nuclear fuel. Waste emplaced in the proposed repository at Yucca Mountain is investigated as the basis for the study. The resulting cumulative actinide and fission product releases to the accessible environment within a 100,000 year period from the various pyrometallurgical process wasteforms are compared to those of directly disposed LWR spent fuel using the same total repository system model. The impact of differing radionuclide transport models on the overall release characteristics is investigated

  10. Development of the Concise Data Processing Assessment

    Directory of Open Access Journals (Sweden)

    James Day

    2011-06-01

    Full Text Available The Concise Data Processing Assessment (CDPA was developed to probe student abilities related to the nature of measurement and uncertainty and to handling data. The diagnostic is a ten question, multiple-choice test that can be used as both a pre-test and post-test. A key component of the development process was interviews with students, which were used to both uncover common modes of student thinking and validate item wording. To evaluate the reliability and discriminatory power of this diagnostic, we performed statistical tests focusing on both item analysis (item difficulty index, item discrimination index, and point-biserial coefficient and on the entire test (test reliability and Ferguson’s delta. Scores on the CDPA range from chance (for novices to about 80% (for experts, indicating that it possesses good dynamic range. Overall, the results indicate that the CDPA is a reliable assessment tool for measuring targeted abilities in undergraduate physics students.

  11. The course of oxidative processes in the hepatopancreas of age-2 carp after supplementing the feeds with thistle (Siliybum marianum seeds

    Directory of Open Access Journals (Sweden)

    M. Korylyak

    2017-03-01

    Full Text Available Purpose. To study the effect of thistle seeds introduced into the basic diet of carp, the functional state of antioxidant protection (AOP and the formation of lipid peroxidation products (LPP in fish hepatopancreas. Methodology. The study has been carried out at the Lviv Research Station of the Institute of Fisheries in duplicate. The first replication was done in 2013, the second one in 2014 at industrial conditions of ponds with similar areas and with the same source of water supply. The object of the study were age-2 Lubin scaled carp. The experiment consisted of four variants and lasted 60 days. The control group of carp received a complete combined feed without additives during the entire growing season, while the experimental groups 1, 2 and 3 received feeds supplemented with 1, 5 and 10% of milled thistle. Thistle was introduced into the feed composition by granulation method. At the end of the experiment, tissue samples of the experimental groups of fish were taken for biochemical analysis. We used 10% tissue homogenates of carp hepatopancreas. We investigated the concentration of diene conjugates using a method based on the reaction of optical density of lipid heptanizopropanol extract. The determination of TBA-active products was carried out spectrophotometrically based on the color reaction with tiobarbitur acid. The activity of superoxide dismutase (SOD was studied by determining the percentage inhibition of nitroblue tetrazolium reduction reaction in the presence of fenazynmetasulfate. The activity of catalase was analyzed based on the concentration of H2O2. The determination of protein content was performed by Bradford method. The processing of experimental results was performed by variational statistics. Statistically significant difference was assessed using a Student t-test. Findings. As a result of experimental studies in industrial conditions in duplicate, we detected AOP activation and reduction in LPO process intensity in

  12. Obsolescence Risk Assessment Process Best Practice

    Science.gov (United States)

    Romero Rojo, F. J.; Roy, R.; Kelly, S.

    2012-05-01

    A component becomes obsolete when it is no longer available from the original manufacturer to the original specification. In long-lifecycle projects, obsolescence has become a major problem as it prevents the maintenance of the system. This is the reason why obsolescence management is now an essential part of the product support activities in sectors such as defence, aerospace, nuclear and railway; where systems need to be supported for several decades. The obsolescence risk assessment for the bill of materials (BoM) is a paramount activity in order to manage obsolescence proactively and cost-effectively. This is the reason why it was necessary to undertake a benchmarking study to develop best practice in this process. A total of 22 obsolescence experts from 13 different organisations/projects from across UK and USA have participated in this study. Their current processes and experience have been taken into account in the development of the best practice process for obsolescence risk assessment. The key factors that have to be analysed in the risk assessment process for each component in the BoM are: number of manufacturers, years to end of life, stock available, consumption rate and operational impact criticality. For the very high risk components, a more detailed analysis is required to inform the decisions regarding the most suitable mitigation strategies. On the contrary, for the low risk components, a fully proactive approach is neither appropriate nor cost effective. Therefore, it is advised for these components that obsolescence issues are dealt with reactively. This process has been validated using case studies with several experts from industry and is currently being implemented by the UK Ministry of Defence as technical guidance within the JSP 886 Volume 7 Part 8.13 standards.

  13. Obsolescence Risk Assessment Process Best Practice

    International Nuclear Information System (INIS)

    Rojo, F J Romero; Roy, R; Kelly, S

    2012-01-01

    A component becomes obsolete when it is no longer available from the original manufacturer to the original specification. In long-lifecycle projects, obsolescence has become a major problem as it prevents the maintenance of the system. This is the reason why obsolescence management is now an essential part of the product support activities in sectors such as defence, aerospace, nuclear and railway; where systems need to be supported for several decades. The obsolescence risk assessment for the bill of materials (BoM) is a paramount activity in order to manage obsolescence proactively and cost-effectively. This is the reason why it was necessary to undertake a benchmarking study to develop best practice in this process. A total of 22 obsolescence experts from 13 different organisations/projects from across UK and USA have participated in this study. Their current processes and experience have been taken into account in the development of the best practice process for obsolescence risk assessment. The key factors that have to be analysed in the risk assessment process for each component in the BoM are: number of manufacturers, years to end of life, stock available, consumption rate and operational impact criticality. For the very high risk components, a more detailed analysis is required to inform the decisions regarding the most suitable mitigation strategies. On the contrary, for the low risk components, a fully proactive approach is neither appropriate nor cost effective. Therefore, it is advised for these components that obsolescence issues are dealt with reactively. This process has been validated using case studies with several experts from industry and is currently being implemented by the UK Ministry of Defence as technical guidance within the JSP 886 Volume 7 Part 8.13 standards.

  14. A Numerical Simulation of Transport Phenomena During the Horizontal Single Belt Casting Process Using an Inclined Feeding System

    Science.gov (United States)

    Xu, Mianguang; Isac, Mihaiela; Guthrie, Roderick I. L.

    2018-06-01

    Horizontal single belt casting (HSBC) has great potential to replace current conventional continuous casting (CCC) processes for sheet metal production, by directly casting 3 to 1 mm sheet for the automobile industry. In the present paper, two-dimensional mathematical models were developed to study transport phenomena, for the case of an inclined wall feeding system for a liquid aluminum wrought alloy (AA6111). Based on the commercial software ANSYS FLUENT 14.5 and user-defined functions, a two-layer turbulence model was used to examine the fluid flow emanating from a slot nozzle set above a water-cooled, high-speed, steel belt. The Volume of Fluid (VOF) method was used to predict the shape of the melt-air interface. A transformed coordinate system ( x', y') was established in order to analyze the fluid flow on the inclined wall of the feeding system. The total pressure gauge gradient ( ∂p total/ ∂x) was used to describe the behavior of the melt film inside the slot nozzle of the head box. The modeling results show that during the melt film falling process, the total gauge pressure varies within the slot nozzle, which can decrease the stability of the falling film. The first impingement between the falling film and the inclined refractory wall of the feeding system gives rise to a local oscillation, and this influences the stability of the melt film moving downwards. At the rear meniscus position between the inclined wall and the moving belt, there is a clear vibration of the air-melt interface, together with a recirculation zone. The weak vibration of the air-melt interface could be induced by the periodic variation of the melt-air interface. Moreover, the formation of tiny air pockets is predicted. Finally, on the inclined wall of the feeding system, a suitable length of the transition area is needed to avoid over-acceleration of the melt film due to the force of gravity.

  15. A Numerical Simulation of Transport Phenomena During the Horizontal Single Belt Casting Process Using an Inclined Feeding System

    Science.gov (United States)

    Xu, Mianguang; Isac, Mihaiela; Guthrie, Roderick I. L.

    2018-03-01

    Horizontal single belt casting (HSBC) has great potential to replace current conventional continuous casting (CCC) processes for sheet metal production, by directly casting 3 to 1 mm sheet for the automobile industry. In the present paper, two-dimensional mathematical models were developed to study transport phenomena, for the case of an inclined wall feeding system for a liquid aluminum wrought alloy (AA6111). Based on the commercial software ANSYS FLUENT 14.5 and user-defined functions, a two-layer turbulence model was used to examine the fluid flow emanating from a slot nozzle set above a water-cooled, high-speed, steel belt. The Volume of Fluid (VOF) method was used to predict the shape of the melt-air interface. A transformed coordinate system (x', y') was established in order to analyze the fluid flow on the inclined wall of the feeding system. The total pressure gauge gradient (∂p total/∂x) was used to describe the behavior of the melt film inside the slot nozzle of the head box. The modeling results show that during the melt film falling process, the total gauge pressure varies within the slot nozzle, which can decrease the stability of the falling film. The first impingement between the falling film and the inclined refractory wall of the feeding system gives rise to a local oscillation, and this influences the stability of the melt film moving downwards. At the rear meniscus position between the inclined wall and the moving belt, there is a clear vibration of the air-melt interface, together with a recirculation zone. The weak vibration of the air-melt interface could be induced by the periodic variation of the melt-air interface. Moreover, the formation of tiny air pockets is predicted. Finally, on the inclined wall of the feeding system, a suitable length of the transition area is needed to avoid over-acceleration of the melt film due to the force of gravity.

  16. Production of a Highly Protease-Resistant Fungal α-Galactosidase in Transgenic Maize Seeds for Simplified Feed Processing.

    Science.gov (United States)

    Yang, Wenxia; Zhang, Yuhong; Zhou, Xiaojin; Zhang, Wei; Xu, Xiaolu; Chen, Rumei; Meng, Qingchang; Yuan, Jianhua; Yang, Peilong; Yao, Bin

    2015-01-01

    Raffinose-family oligosaccharide (RFO) in soybeans is one of the major anti-nutritional factors for poultry and livestocks. α-Galactosidase is commonly supplemented into the animal feed to hydrolyze α-1,6-galactosidic bonds on the RFOs. To simplify the feed processing, a protease-resistant α-galactosidase encoding gene from Gibberella sp. strain F75, aga-F75, was modified by codon optimization and heterologously expressed in the embryos of transgentic maize driven by the embryo-specific promoter ZM-leg1A. The progenies were produced by backcrossing with the commercial inbred variety Zheng58. PCR, southern blot and western blot analysis confirmed the stable integration and tissue specific expression of the modified gene, aga-F75m, in seeds over four generations. The expression level of Aga-F75M reached up to 10,000 units per kilogram of maize seeds. In comparison with its counterpart produced in Pichia pastoris strain GS115, maize seed-derived Aga-F75M showed a lower temperature optimum (50 °C) and lower stability over alkaline pH range, but better thermal stability at 60 °C to 70 °C and resistance to feed pelleting inactivation (80 °C). This is the first report of producing α-galactosidase in transgenic plant. The study offers an effective and economic approach for direct utilization of α-galactosidase-producing maize without any purification or supplementation procedures in the feed processing.

  17. Assessment of the Electrical Power Requirements for Continued Safe Storage and Waste Feed Delivery Phase One

    International Nuclear Information System (INIS)

    MAY, T.H.

    2000-01-01

    This study evaluated the ability of the electrical distribution system to support safe storage as well as the first phase of the Waste Feed Delivery. Several recommendations are made to improve the electrical system. The ability to assure adequate Waste Feed Delivery (WFD) to the Privatization Contractor's vitrification facility is a key element in the overall Hanford cleanup schedule. An important aspect of this WFD is the availability of sufficient and appropriate electrical power in the single- and double-shell tank farms. The methodology for performing this review and the results are described

  18. Modelling and simulation of the phased feeding process with biological elimination of nitrogen and phosphorus; Modelizacion y simulacion del proceso de alimentacion escalonada con eliminacion biologica de nitrogeno y fosforo

    Energy Technology Data Exchange (ETDEWEB)

    Rodriguez, J. C.; Jorda, J. R.; Cortacans, J. A. [Infilco Espanola, S. A. Madrid (Spain)

    2000-07-01

    It is set forth experimental results on an Alternative Phase Step Feed Pilot Plant (Nitrogen and Phosphorus removal) placed in San Agustin de Guadalix (Madrid CYII) WWTP. Results on IAWQ Model N. 2 calibration and evaluation of its predictive capacity are also included. Finally, it is introduced the Alphasin, Process Simulator that INFILCO uses as a design and assessment tool on Alpha Process Plants with organic matter removal exclusively or incorporating nutrients (Nitrogen and/or Phosphorus) removal. (Author) 8 refs.

  19. Assessment of the effects of fish meal, wheat gluten, soy protein concentrate and feed moisture on extruder system parameters and the technical quality of fish feed

    NARCIS (Netherlands)

    Draganovic, V.; Goot, van der A.J.; Boom, R.M.; Jonkers, J.

    2011-01-01

    Evaluation of feed ingredient functionality plays a vital role in modern fish feed manufacturing practice. The aim of this study was to examine the extrusion behaviour of blends containing alternative protein sources from plant origin to fish meal (FM), such as wheat gluten (WG) and soy protein

  20. Process-based models of feeding and prey selection in larval fish

    DEFF Research Database (Denmark)

    Fiksen, O.; MacKenzie, Brian

    2002-01-01

    believed to be important to prey selectivity and environmental regulation of feeding in fish. We include the sensitivity of prey to the hydrodynamic signal generated by approaching larval fish and a simple model of the potential loss of prey due to turbulence whereby prey is lost if it leaves...... jig dry wt l(-1). The spatio-temporal fluctuation of turbulence (tidal cycle) and light (sun height) over the bank generates complex structure in the patterns of food intake of larval fish, with different patterns emerging for small and large larvae....

  1. A high-speed tunable beam splitter for feed-forward photonic quantum information processing.

    Science.gov (United States)

    Ma, Xiao-Song; Zotter, Stefan; Tetik, Nuray; Qarry, Angie; Jennewein, Thomas; Zeilinger, Anton

    2011-11-07

    We realize quantum gates for path qubits with a high-speed, polarization-independent and tunable beam splitter. Two electro-optical modulators act in a Mach-Zehnder interferometer as high-speed phase shifters and rapidly tune its splitting ratio. We test its performance with heralded single photons, observing a polarization-independent interference contrast above 95%. The switching time is about 5.6 ns, and a maximal repetition rate is 2.5 MHz. We demonstrate tunable feed-forward operations of a single-qubit gate of path-encoded qubits and a two-qubit gate via measurement-induced interaction between two photons.

  2. Tracheostomy in Young Children: Implications for Assessment and Treatment of Communication and Feeding Disorders.

    Science.gov (United States)

    Simon, Bonnie M.; McGowan, Joy Silverman

    1989-01-01

    The article reviews studies showing that speech and language intervention during the period of cannulation can benefit tracheostomized and ventilator-dependent children by improving their communicative functioning while decreasing their frustration with the tracheostomy placement. Therapeutic interventions with feeding skills are also recommended.…

  3. Levels and risk assessment of chemical contaminants in byproducts for animal feed in Denmark

    DEFF Research Database (Denmark)

    Mortensen, Alicja; Granby, Kit; Eriksen, Folmer Damsted

    2014-01-01

    With aim to provide information on chemical contaminants in byproducts in animal feed, the data from an official control by the Danish Plant Directorate during 1998-2009, were reviewed and several samples of citrus pulp and dried distillers grains with solubles (DDGS) were additionally collected ...

  4. Assessing environmental consequences of using co-products in animal feed

    NARCIS (Netherlands)

    Zanten, van H.H.E.; Mollenhorst, H.; Vries, de J.W.; Middelaar, van C.E.; Kernebeek, van H.R.J.; Boer, de I.J.M.

    2014-01-01

    The livestock sector has a major impact on the environment. This environmental impact may be reduced by feeding agricultural co-products (e.g. beet tails) to livestock, as this transforms inedible products for humans into edible products, e.g. pork or beef. Nevertheless, co-products have different

  5. Sustainability assessment of salmonid feed using energy, classical exergy and eco-exergy analysis

    NARCIS (Netherlands)

    Draganovic, V.; Jorgensen, S.E.; Boom, R.M.; Jonkers, J.; Goot, van der A.J.

    2013-01-01

    Reduction of the environmental impact of feed products is of paramount importance for salmon farming. This article explores the potential to compare three thermodynamically based ecological indicators. The environmental impact of partial replacement of fish meal (FM) and fish oil with alternative

  6. IV&V Project Assessment Process Validation

    Science.gov (United States)

    Driskell, Stephen

    2012-01-01

    The Space Launch System (SLS) will launch NASA's Multi-Purpose Crew Vehicle (MPCV). This launch vehicle will provide American launch capability for human exploration and travelling beyond Earth orbit. SLS is designed to be flexible for crew or cargo missions. The first test flight is scheduled for December 2017. The SLS SRR/SDR provided insight into the project development life cycle. NASA IV&V ran the standard Risk Based Assessment and Portfolio Based Risk Assessment to identify analysis tasking for the SLS program. This presentation examines the SLS System Requirements Review/System Definition Review (SRR/SDR), IV&V findings for IV&V process validation correlation to/from the selected IV&V tasking and capabilities. It also provides a reusable IEEE 1012 scorecard for programmatic completeness across the software development life cycle.

  7. Chemical and biotechnological processing of collagen-containing raw materials into functional components of feed suitable for production of high-quality meat from farm animals

    Science.gov (United States)

    Baburina, M. I.; Ivankin, A. N.; Stanovova, I. A.

    2017-09-01

    The process of chemical biotechnological processing of collagen-containing raw materials into functional components of feeds for effective pig rearing was studied. Protein components of feeds were obtained as a result of hydrolysis in the presence of lactic acid of the animal collagen from secondary raw materials, which comprised subcutaneous collagen (cuticle), skin and veined mass with tendons from cattle. For comparison, a method is described for preparing protein components of feeds by cultivating Lactobacillus plantarum. Analysis of the kinetic data of the conversion of a high-molecular collagen protein to an aminolyte polypeptide mixture showed the advantage of microbiological synthesis in obtaining a protein for feeds. Feed formulations have been developed to include the components obtained, and which result in high quality pork suitable for the production of quality meat products.

  8. Industrial process system assessment: bridging process engineering and life cycle assessment through multiscale modeling.

    Science.gov (United States)

    The Industrial Process System Assessment (IPSA) methodology is a multiple step allocation approach for connecting information from the production line level up to the facility level and vice versa using a multiscale model of process systems. The allocation procedure assigns inpu...

  9. Development, design, and preliminary operation of a resin-feed processing facility for resin-based HTGR fuels

    International Nuclear Information System (INIS)

    Haas, P.A.; Drago, J.P.; Million, D.L.; Spence, R.D.

    1978-01-01

    Fuel kernels for recycle of 233 U to High-Temperature Gas-Cooled Reactors are prepared by loading carboxylic acid cation exchange resins with uranium and carbonizing at controlled conditions. Resin-feed processing was developed and a facility was designed, installed, and operated to control the kernel size, shape, and composition by processing the resin before adding uranium. The starting materials are commercial cation exchange resins in the sodium form. The size separations are made by vibratory screening of resin slurries in water. After drying in a fluidized bed, the nonspherical particles are separated from spherical particles on vibratory plates of special design. The sized, shape-separated spheres are then rewetted and converted to the hydrogen form. The processing capacity of the equipment tested is equivalent to about 1 kg of uranium per hour and could meet commercial recycle plant requirements without scale-up of the principal process components

  10. An assessment of the Synroc process

    International Nuclear Information System (INIS)

    Harley, P.E.; Birch, D.

    1981-11-01

    A study has been carried out of proposed routes for the full scale manufacture of Synroc [incorporation of elements occurring in radioactive wastes into several mineral phases so as to produce a synthetic rock] with an appreciation of the technologies involved in the various stages of manufacture. Possible problem areas have been identified and solutions suggested. To provide a baseline for the Synroc assessment a comparison has been made with first generation borosilicate glass processes. A conceptual model Synroc plant has been specified and areas where further research and development are required to establish the feasibility of the process have been identified. Emphasis throughout the study has been placed on the plant rather than on the product although for the sake of completeness Appendix A to the report describes current knowledge of the properties of Synroc. (author)

  11. Characteristics of particle-bound polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) in atmosphere used in carbon black feeding process at a tire manufacturing plant.

    Science.gov (United States)

    Chuang, Kuen-Yuan; Lai, Chia-Hsiang; Peng, Yen-Ping; Yen, Ting-Yu

    2015-12-01

    Concentrations of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) were estimated for different particle size distributions in a carbon black feeding process at a tire manufacturing plant on 15 days in March and April of 2014. A total of 75 integrated air samples were collected using a micro-orifice uniform deposition impactor (MOUDI). Particle-bound PCDD/Fs were analyzed using a high-resolution gas chromatograph/high-resolution mass spectrometer (HRGC/HRMS). Concentrations of thoracic particles and total particles produced in the carbon black feeding process of a tire manufacturing plant were measured in ranges of 0.19-2.61 and 0.28-4.22 mg/m(3), respectively. On all sampling days, the three most abundant species of PCDD/Fs were OCDD, 1,2,3,4,6,7,8-HpCDF, and OCDF. The mean concentrations of total PCDD/Fs were 0.74-6.83 pg/m(3) within five particle size ranges. Total I-TEQ in particulate matter (PM)18 and PM2.5-10, respectively. However, the total I-TEQ of thoracic PM contributed approximately 74 % of the total I-TEQ of total PM. The assessment of health risk indicates that exposure to fractions of thoracic PM by inhalation poses a significant cancer risk (>10(-6)).

  12. Examining variability in parent feeding practices within a low-income, racially/ethnically diverse, and immigrant population using ecological momentary assessment.

    Science.gov (United States)

    Berge, Jerica M; Tate, Allan; Trofholz, Amanda; Loth, Katie; Miner, Michael; Crow, Scott; Neumark-Sztainer, Dianne

    2018-04-21

    Current measures of parent feeding practices are typically survey-based and assessed as static/unchanging characteristics, failing to account for fluctuations in these behaviors across time and context. The current study uses ecological momentary assessment to examine variability of, and predictors of, parent feeding practices within a low-income, racially/ethnically diverse, and immigrant sample. Children ages 5-7 years old and their parents (n = 150 dyads) from six racial/ethnic groups (n = 25 from each; Black/African American, Hispanic, Hmong, Native American, Somali, White) were recruited for this mixed-methods study through primary care clinics. Among parents who used restriction (49%) and pressure-to-eat (69%) feeding practices, these feeding practices were utilized about every other day. Contextual factors at the meal associated with parent feeding practices included: number of people at the meal, who prepared the meal, types of food served at meals (e.g., pre-prepared, homemade, fast food), meal setting (e.g., kitchen table, front room), and meal emotional atmosphere (p meat proteins, and refined grains (p < 0.05). There were some differences by race/ethnicity across findings (p < 0.01), with Hmong parents engaging in the highest levels of pressure-to-eat feeding practices. Parent feeding practices varied across the week, indicating feeding practices are more likely to be context-specific, or state-like than trait-like. There were some meal characteristics more strongly associated with engaging in restriction and pressure-to-eat feeding practices. Given that parent feeding practices appear to be state-like, future interventions and health care providers who work with parents and children may want to address contextual factors associated with parent feeding practices to decrease restriction and pressure-to-eat parent feeding practices. Copyright © 2018 Elsevier Ltd. All rights reserved.

  13. Construction of quality-assured infant feeding process of care data repositories: definition and design (Part 1).

    Science.gov (United States)

    Garcí A-de-León-Chocano, Ricardo; Sáez, Carlos; Muñoz-Soler, Verónica; Garcí A-de-León-González, Ricardo; García-Gómez, Juan M

    2015-12-01

    This is the first paper of a series of two regarding the construction of data quality (DQ) assured repositories for the reuse of information on infant feeding from birth until two years old. This first paper justifies the need for such repositories and describes the design of a process to construct them from Electronic Health Records (EHR). As a result, Part 1 proposes a computational process to obtain quality-assured datasets represented by a canonical structure extracted from raw data from multiple EHR. For this, 13 steps were defined to ensure the harmonization, standardization, completion, de-duplication, and consistency of the dataset content. Moreover, the quality of the input and output data for each of these steps is controlled according to eight DQ dimensions: predictive value, correctness, duplication, consistency, completeness, contextualization, temporal-stability and spatial-stability. The second paper of the series will describe the application of this computational process to construct the first quality-assured repository for the reuse of information on infant feeding in the perinatal period aimed at the monitoring of clinical activities and research. Copyright © 2015 Elsevier Ltd. All rights reserved.

  14. Proliferation resistance assessment of pyro processing

    Energy Technology Data Exchange (ETDEWEB)

    Kwon, E. H.; Ko, W. I.; Kim, H. D. [KAERI, Daejeon (Korea, Republic of)

    2012-10-15

    In 2002, world experts gathered and defined the term proliferation resistance as 'the characteristic of a nuclear energy system that impedes the diversion or undeclared production of nuclear material, or misuse of technology, by State in order to acquire nuclear weapons or other nuclear explosive devices.' The same report also defines the following terms: Intrinsic barriers (technical features) of proliferation resistance are features that result from the technical design of nuclear energy systems, including those that facilitate the implementation of extrinsic measures. Extrinsic barriers (institutional measures) of proliferation resistance are features that result from the decisions and undertakings of states related to nuclear energy system. Intrinsic barriers are further divided into material barriers.the 'intrinsic, or inherent, qualities of materials that reduce the inherent desirability or attractiveness of the material as an explosive' and technical barriers. The 'intrinsic technical lements of the fuel cycle, its facilities, processes, and equipment that serve to make it difficult to gain access to materials and/or to use or misuse facilities to obtain weapons usable materials.' Material barriers include isotopic, chemical, radiological, mass and bulk, and detectability, whereas technical barriers include facility unattractiveness, accessibility, available fissile mass, detectability of and time required for diversion, and skills, expertise, and knowledge. Assessing the proliferation resistance of pyro processing is meaningful only when compared with other processes. This paper attempts to discuss the features of pyro processing by comparing it with direct disposal and aqueous separation processes from a proliferation resistance viewpoint.

  15. Enhancement of certain agro-cellulosic wastes through radiation processing for livestock feed

    International Nuclear Information System (INIS)

    Farag, D.M.H.; Zakaria, S.

    1999-01-01

    A study was undertaken with air-dried peanut hulls, sugarcane bagasse, corn stalks, concobs, banana leaves, wheat straw and broad bean straw to determine the effect of radiation treatment up to 3 MGY on their chemical composition and the effect of enzymatic hydrolysis on treated wastes. The effect of gamma irradiation on crude protein, fat and ash of these wastes was negligible. While radiation treatment reduced the content of crude fiber in all these wastes with corresponding increases in dry matter digestibility in vitro, as a function of radiation dose. When peanut hulls, sugarcane bagasse and wheat straw were exposed to gamma rays at 0, 1, 2 and 3 MGy a linear reduction in fiber components (neutral detergent fiber, acid detergent fiber, and lignin), increased in glucose yield enzymatic hydrolysis and dry matter digestibility were observed for peanut hulls, sugarcane bagasse and wheat straw. The findings confirm that irradiation of fibrous vegetable materials could convert them into a valuable feed supplement

  16. Evolution of risk assessment strategies for food and feed uses of stacked GM events

    OpenAIRE

    Kramer, Catherine; Brune, Phil; McDonald, Justin; Nesbitt, Monique; Sauve, Alaina; Storck?Weyhermueller, Sabine

    2016-01-01

    Summary Data requirements are not harmonized globally for the regulation of food and feed derived from stacked genetically modified (GM) events, produced by combining individual GM events through conventional breeding. The data required by some regulatory agencies have increased despite the absence of substantiated adverse effects to animals or humans from the consumption of GM crops. Data from studies conducted over a 15?year period for several stacked GM event maize (Zea mays L.) products (...

  17. Quality assessment of corn batches received at a feed mill in the brazilian cerrado

    Directory of Open Access Journals (Sweden)

    SIFC Rodrigues

    2014-09-01

    Full Text Available This study aimed at investigating factors that contribute to changes in the quality of corn used in compound poultry feeds. Samples were collected from 6488 bulk cargos received at a feed mill located close to Brasília, Brazil. The parameters studied were divided into two groups: those related to corn chemical composition, including crude protein (% CP, ether extract (% EE, crude fiber (% CF, nitrogen-free extract (% NFE, and estimated metabolizable energy (ME, and corn physical characteristics, including density, moisture, and grain physical damage. High coefficients of determination (R² and low coefficients of variation (CV were determined for the chemical and physical parameters. The analysis of variance showed low to medium R². Month, year, supplier, and their interactions influenced (p <0.05 all chemical properties, as well as density, moisture, and ME. Physical characteristics were less affected by those factors, except for quantity of damaged grains. The principal component analysis separated the physical and chemical factors. The coefficients of the first component explained 54% of the total variation between variables. The first principal component showed that NFE and ME increased as humidity decreased. The second component also showed a decrease of physical problems due to reduction in humidity. Results indicate that the feed mills should take preventive measures when selecting suppliers, and diets should be formulated according to the differences in chemical and physical composition of corn supplied in different months and years.

  18. Numerical and experimental study of a solid pellet feed continuous Czochralski growth process for silicon single crystals

    Science.gov (United States)

    Anselmo, A.; Prasad, V.; Koziol, J.; Gupta, K. P.

    1993-07-01

    A polysilicon pellets (≅1 mm diameter) feed continuous Czochralski (CCZ) growth process for silicon single crystals is proposed and investigated. Experiments in an industrial puller (14-18 inch diameter crucible) successfully demonstrate the feasibility of this process. The advantages of the proposed scheme are: a steady state growth process, a low aspect ratio melt, uniformity of heat addition and a growth apparatus with single crucible and no baffle(s). The addition of dopant with the solid charge will allow a better control of oxygen concentration leading to crystals of uniform properties and better quality. This paper presents theoretical results on melting of fully and partially immersed silicon spheres and numerical solutions on temperature and flow fields in low aspect ration melts with and without the addition of solid pellets. The theoretical and experimental results obtained thus far show a great promise for the proposed scheme.

  19. NASA Human System Risk Assessment Process

    Science.gov (United States)

    Francisco, D.; Romero, E.

    2016-01-01

    NASA utilizes an evidence based system to perform risk assessments for the human system for spaceflight missions. The center of this process is the multi-disciplinary Human System Risk Board (HSRB). The HSRB is chartered from the Chief Health and Medical Officer (OCHMO) at NASA Headquarters. The HSRB reviews all human system risks via an established comprehensive risk and configuration management plan based on a project management approach. The HSRB facilitates the integration of human research (terrestrial and spaceflight), medical operations, occupational surveillance, systems engineering and many other disciplines in a comprehensive review of human system risks. The HSRB considers all factors that influence human risk. These factors include pre-mission considerations such as screening criteria, training, age, sex, and physiological condition. In mission factors such as available countermeasures, mission duration and location and post mission factors such as time to return to baseline (reconditioning), post mission health screening, and available treatments. All of the factors influence the total risk assessment for each human risk. The HSRB performed a comprehensive review of all potential inflight medical conditions and events and over the course of several reviews consolidated the number of human system risks to 30, where the greatest emphasis is placed for investing program dollars for risk mitigation. The HSRB considers all available evidence from human research and, medical operations and occupational surveillance in assessing the risks for appropriate mitigation and future work. All applicable DRMs (low earth orbit for 6 and 12 months, deep space for 30 days and 1 year, a lunar mission for 1 year, and a planetary mission for 3 years) are considered as human system risks are modified by the hazards associated with space flight such as microgravity, exposure to radiation, distance from the earth, isolation and a closed environment. Each risk has a summary

  20. AN ASSESSMENT OF DIOXIN LEVELS IN PROCESSED ...

    Science.gov (United States)

    The presence of dioxin-like compounds in ball clay was discovered in 1996 as a result of an investigation to determine the sources of elevated levels of dioxin found in two chicken fat samples from a national survey of poultry. The investigation indicated that soybean meal added to chicken feed was the source of dioxin contamination. Further investigation showed that the dioxin contamination came from the mixing of a natural clay known as

  1. Health technology assessment: the process in Brazil.

    Science.gov (United States)

    Lessa, Fernanda; Ferraz, Marcos Bosi

    2017-06-08

    To describe, analyze, and compare the opinions of decisionmakers involved in the health technology assessment (HTA) process in Brazil in 2011. A cross-sectional study was conducted using a structured questionnaire to evaluate the opinions of a convenience sample of health care professionals from both the public and private health care systems (HCS). The survey collected demographic data for each respondent along with their input on national regulations. Data analysis included descriptive statistics, including chi-square tests to compare groups. Of the 200 completed questionnaires, 65% of the respondents were 31-50 years of age; 36% were HCS managers, 49.3% from the public and 50.7% from the private system. The majority of respondents (85%) considered the time permitted for submission of new technology to be inadequate; 88% also stated that the composition of the evaluation committee needed improvement. Respondents from the private health system more frequently stated that submission times were inappropriate (P = 0.019) and that the deadline for a decision by the committee should be defined (P = 0.021), with a maximum of no more than 180 days / 6 months (P < 0.001). Respondents indicated that the HTA process should be improved to meet their expectations. Given that new legislation has been enacted to continuously accept submissions, to make decisions within 180 days, and to expand the committee to represent more stakeholders, most of the respondents concerns have been addressed. This study is valuable as an historical analysis of HTA process improvement. Further surveys are needed to track the new HTA process, its application, and its contribution to health care needs in Brazil.

  2. Optimization of prehydrolysis time and substrate feeding to improve ethanol production by simultaneous saccharification and fermentation of furfural process residue.

    Science.gov (United States)

    He, Jianlong; Zhang, Wenbo; Liu, Xiaoyan; Xu, Ning; Xiong, Peng

    2016-11-01

    Ethanol is a very important industrial chemical. In order to improve ethanol productivity using Saccharomyces cerevisiae in fermentation from furfural process residue, we developed a process of simultaneous saccharification and fermentation (SSF) of furfural process residue, optimizing prehydrolysis cellulase loading concentration, prehydrolysis time, and substrate feeding strategy. The ethanol concentration obtained from the optimized process was 19.3 g/L, corresponding 76.5% ethanol yield, achieved by running SSF for 48 h from 10% furfural process residue with prehydrolysis at 50°C for 4 h and cellulase loading of 15 FPU/g furfural process residue. For higher ethanol concentrations, fed-batch fermentation was performed. The optimized fed-batch process increased the ethanol concentration to 37.6 g/L, 74.5% yield, obtained from 10% furfural process residue with two additions of 5% substrate at 12 and 24 h. Copyright © 2016 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

  3. Influence of feeding thermally peroxidized soybean oil to finishing barrows on processing characteristics and shelf life of commercially manufactured bacon.

    Science.gov (United States)

    Overholt, M F; Lowell, J E; Kim, G D; Boler, D D; Kerr, B J; Dilger, A C

    2018-05-12

    Objectives were to evaluate effects of feeding soybean oil (SO) with varying levels of peroxidation on fresh belly characteristics, processing yields, and shelf life of commercially manufactured bacon stored under food-service style conditions. Fifty-six barrows were randomly assigned to 1 of 4 diets containing 10% fresh SO (22.5°C) or thermally processed SO (45°C for 288 h, 90°C for 72 h, or 180°C for 6 h), each infused with air at a rate of 15L/min. Individually housed pigs were provided ad libitum access to feed for 81 d. On d 82 pigs were slaughtered and on d 83 carcasses were fabricated and bellies collected for recording of weight, dimensions, and flop distance. Belly adipose tissue cores were collected for analysis of iodine value (IV) by near-infrared spectroscopy (NIR-IV). Bacon was manufactured at a commercial processing facility and sliced bacon was subsequently transferred to food-service style packaging and subjected to 0, 30, 60, or 90 d storage at -20°C. Stored bacon was evaluated for thiobarbituric acid reactive substances (TBARS) and trained sensory evaluation of oxidized odor and flavor. Fresh belly and bacon processing traits were analyzed as a one-way ANOVA with the fixed effect of SO; whereas, shelf life traits were analyzed as a one-way ANOVA repeated in time. There was no effect (P ≥ 0.30) of SO on belly weight, length, width, or thickness; but bellies of pigs fed 90°C SO had greater (P ≤ 0.04) flop distance (more firm) than all other SO treatments. Belly fat NIR-IV of pigs fed 90°C SO were 10.22 units less (P processed at 90°C and 180°C reduced belly adipose tissue IV, but feeding peroxidized SO did not affect processing yields or shelf life characteristics of commercially manufactured bacon.

  4. Model of Transient Process Where Three-Phase Transducer Feeds Induction Motor Equivalent as a Variable Active-Inductive Load

    Directory of Open Access Journals (Sweden)

    Nenad Marković

    2016-01-01

    Full Text Available The paper presents a new approach in the analysis of a transient state in a system where the feeding source is a transducer-IGBT inverter and load is introduced through the induction motor with its R-L parameters. Induction motors with different parameters of powers and power factors are tested. MATLAB simulation of the three-phase inverter that feeds the induction machine has replaced the missing lab equipment with which mathematical model of this system was verified. According to the selected parameters of the inverter and induction machine and through the simulation in the MATLAB program, the results are obtained in the form of diagrams that verify the model of a transient state of the induction machine operation when it operates as a motor which is presented as a variable R-L load. The transient process of the system three-phase bridge inverter whose active-inductive load is the induction machine in the conditions of the change of the load parameters is analyzed. The model of the transient process in the system formed by the inverter in PWM (Pulse Width Modulation converter and induction machine is developed in the time domain and phase coordinates.

  5. Nuclear safety of extended sludge processing on tank 42 and 51 sludge (DWPF sludge feed batch one)

    International Nuclear Information System (INIS)

    Clemons, J.S.

    1993-01-01

    The sludge in tanks 42 and 51 is to be washed with inhibited water to remove soluble salts and combined in tank 51 in preparation for feed to DWPF. Since these tanks contain uranium and plutonium, the process of washing must be evaluated to ensure subcriticality is maintained. When the sludge is washed, inhibited water is added, the tank contents are slurried and allowed to settle. The sludge wash water is then decanted to the evaporator feed tank where it is fed to the evaporator to reduce the volume. The resulting evaporator concentrate is sent to a salt tank where it cools and forms crystallized salt cake. This salt cake will later be dissolved, processed in ITP and sent to Z-Area. This report evaluates the supernate and sludge during washing, the impact on the evaporator during concentration of decanted wash water, and the salt tank where the concentrated supernate is deposited. The conclusions generated in this report are specific to the sludge currently contained in tanks 42 and 51

  6. Assessment of malnutrition and enteral feeding practices in the critically ill: A single-centre observational study

    Directory of Open Access Journals (Sweden)

    Prashant Paul Verghese

    2018-01-01

    Full Text Available Background and Aims: Early identification of malnutrition among hospitalised patients is essential to institute appropriate patient-specific nutritional strategies. This study was conducted to evaluate the nutritional status of medical patients at admission to the adult intensive care unit (ICU and to identify factors which prevent attainment of daily feeding goals in them. Methods: This was a 1 year prospective, observational study on 200 medical adult ICU patients. The study was carried out based on daily documentation. The primary outcome was the nutritional status of medical Patients at admission to the adult ICU. The tests for statistical analysis used were independent t test, Chi-square test, Fisher's exact test and multivariate logistic regression analysis. Results: Out of the 200 patients in our study, 45%, 48.5% and 9% of patients had mild, moderate and severe malnutrition, respectively, corresponding to subjective global assessment (SGA rating A,B and C, respectively. The most common reasons for non-attainment of daily feeding goals were delayed feed procurement (17.57%, and feeds being held for procedures (16.36%. The overall mean length of ICU stay was 8.63 ± 7.26 days, and the ICU mortality rate was 47.5% (95/200. Patients with SGA rating B and C at admission had higher risk of mortality in the ICU, with an adjusted odds ratio of 3.54 (95% confidence interval [CI]- 1.71–7.33, P = 0.001 and 11.11 (95% CI-2.26–54.66, P = 0.003, respectively. Conclusion: Malnutrition is commonly present at admission among medical ICU patients, and is associated with higher ICU mortality.

  7. Utilization of new feeding technology in power production from biomass; safety aspects and techno-economic assessment

    Energy Technology Data Exchange (ETDEWEB)

    Wilen, C.; Rautalin, A. [VTT Energy, Espoo (Finland)

    1998-12-31

    Safety-technical characteristics of fuels, primarily biomass and, as reference, coal, have been studied at VTT Energy since the year 1993. The work has been related mainly to the development work of feeding and handling systems for pressurised gasification and combustion technology. Dust explosion and self-ignition characteristics of fuels have been determined in a number of research projects. Possible prevention of dust explosions with a suppression method immediately at ignition was studied in a project on suppression of dust explosions in biomass-utilising plants (Bioenergia Programme 1995). The first phase of dust explosion and suppression tests at elevated pressure were carried out in testing equipment of 5,6 m{sup 3} constructed, in particular, for these tests in Great Britain. Tests were made both with coal and wood powders by Coal Technology Development Division (British Coal Corporation) and Kidde Fire Protection. At the first stage of the test programme both coal and wood powder explosions were successfully suppressed at 10 bar pressure level. The current 1997-98 project includes the second phase of the explosion suppression tests, which will be carried out at 18 bar. If successful these tests would enable the extrapolation of the operation values to the pressure level of IGCC plants, i.e. to 20 - 25 bar. The boundary conditions set by safety factors on the design of pressurised (and atmospheric) feeding systems are fairly well-known due to data obtained from dust explosion and self-ignition experiments and from dust explosion suppression tests. The overall aim of the research is to compare pressurised system alternatives based primarily on lock-hopper feeding technology both technically and economically. A significant issue is how to arrange pressurisation and sufficient inertisation. New alternatives to produce inert gas will be assessed. The newest equipment, plug screw and piston feeders under development, will also be included in the study. The

  8. Environmental assessment process needs and future directions

    International Nuclear Information System (INIS)

    Gustafson, P.F.

    1985-01-01

    The environmental assessment process as legislatively mandated by the National Environmental Policy Act of 1969 (NEPA) constitutes a double-edged sword as regards the successful management and disposal of radioactive waste. On the one hand, NEPA requires identification and disclosure of the environmental and societal consequences of a given major federal action, consideration of alternatives and/or mitigative measures leading to the same end result, a balancing of costs and benefits, and provides for and encourages public participation in the decision-making process regarding the proposed action(s). On the other hand, public participation supported by judicial decisions, based more upon procedural than substantive issues, may delay, alter, or indeed prohibit a proposed course of action. If the cognizant federal agencies (DOE and NRC in the radioactive waste area) comply with both the spirit and the letter of NEPA a framework for the successful management of radioactive wastes on all types can be developed. If however, these agencies are less than earnest in their NEPA compliance actions or if public opposition is backed by overzealous court action, any radioactive waste management/disposal action (however technically sound) can be hoisted upon a petard from which it may not be freed until well into the next century

  9. Environmental assessment process needs and future directions

    Energy Technology Data Exchange (ETDEWEB)

    Gustafson, P.F.

    1985-01-01

    The environmental assessment process as legislatively mandated by the National Environmental Policy Act of 1969 (NEPA) constitutes a double-edged sword as regards the successful management and disposal of radioactive waste. On the one hand, NEPA requires identification and disclosure of the environmental and societal consequences of a given major federal action, consideration of alternatives and/or mitigative measures leading to the same end result, a balancing of costs and benefits, and provides for and encourages public participation in the decision-making process regarding the proposed action(s). On the other hand, public participation supported by judicial decisions, based more upon procedural than substantive issues, may delay, alter, or indeed prohibit a proposed course of action. If the cognizant federal agencies (DOE and NRC in the radioactive waste area) comply with both the spirit and the letter of NEPA a framework for the successful management of radioactive wastes on all types can be developed. If however, these agencies are less than earnest in their NEPA compliance actions or if public opposition is backed by overzealous court action, any radioactive waste management/disposal action (however technically sound) can be hoisted upon a petard from which it may not be freed until well into the next century.

  10. Complete nitrogen removal from municipal wastewater via partial nitrification by appropriately alternating anoxic/aerobic conditions in a continuous plug-flow step feed process.

    Science.gov (United States)

    Ge, Shijian; Peng, Yongzhen; Qiu, Shuang; Zhu, Ao; Ren, Nanqi

    2014-05-15

    This study assessed the technical feasibility of removing nitrogen from municipal wastewater by partial nitrification (nitritation) in a continuous plug-flow step feed process. Nitrite in the effluent accumulated to over 81.5  ± 9.2% but disappeared with the transition of process operation from anoxic/oxic mode to the anaerobic/anoxic/oxic mode. Batch tests showed obvious ammonia oxidizing bacteria (AOB) stimulation (advanced ammonia oxidation rate) and nitrite (NOB) oxidizing bacteria inhibition (reduced nitrite oxidation rate) under transient anoxic conditions. Two main factors contributed to nitritation in this continuous plug-flow process: One was the alternating anoxic and oxic operational condition; the step feed strategy guaranteed timely denitrification in anoxic zones, allowing a reduction in energy supply (nitrite) to NOB. Fluorescence in Situ Hybridization and quantitative real-time polymerase chain reaction analysis indicated that NOB population gradually decreased to 1.0  ± 0.1% of the total bacterial population (dominant Nitrospira spp., 1.55 × 10(9) copies/L) while AOB increased approximately two-fold (7.4  ± 0.9%, 1.25 × 10(10) copies/L) during the above anoxic to anaerobic transition. Most importantly, without addition of external carbon sources, the above wastewater treatment process reached 86.0  ± 4.2% of total nitrogen (TN) removal with only 7.23 ± 2.31 mg/L of TN in the effluent, which met the discharge requirements. Copyright © 2014 Elsevier Ltd. All rights reserved.

  11. Soybean in different forms of processing in the feeding of crossbred cows on brachiaria grass pastures

    Directory of Open Access Journals (Sweden)

    Vinícius Raimundi Andrade

    2015-02-01

    Full Text Available The objective was to evaluate intake and digestibility of nutrients, as well as milk production and composition of the milk from F1 Holstein × Gyr cows kept on pasture, supplemented with sugarcane and concentrate (28% CP. Five cows with 150±14 lactation days and average milk production of 7.1±2.1 kg/day were distributed in a 5 × 5 Latin square design. The treatments were: soybean meal-based concentrate; soy bean-based concentrate; ground soybean-based concentrate; roasted soybean-based concentrate; and ground, roasted soybean-based concentrate. Dry matter (DM, organic matter, crude protein (CP, neutral detergent fiber (NDF, total carbohydrates and total digestible nutrients intakes were not affected by the diet, but ether extract intake was higher for the animals fed soy bean-based diets than those fed soybean meal. The digestibility of DM, NDF and CP did not differ. The corrected milk yield differed between treatments; animals on the treatment with soy bean-based concentrate had the lowest production in relation to the others, which did not differ from each other. There was no difference between treatments for milk composition. Thus, soybean meal can be replaced by ground soy beans or roasted soy beans (ground or whole in diets for low-yield cows reared on Brachiaria decumbens pastures with no harm to milkproduction or composition. Therefore, the use of these alternative raw materials is recommended whenever their inclusion represents lower feeding costs.

  12. Species-specific detection of processed animal proteins in feed by Raman spectroscopy.

    Science.gov (United States)

    Mandrile, Luisa; Amato, Giuseppina; Marchis, Daniela; Martra, Gianmario; Rossi, Andrea Mario

    2017-08-15

    The existing European Regulation (EC n° 51/2013) prohibits the use of animals meals in feedstuffs in order to prevent Bovine Spongiform Encephalopathy infection and diffusion, however the legislation is rapidly moving towards a partial lifting of the "feed ban" and the competent control organisms are urged to develop suitable analytical methods able to avoid food safety incidents related to animal origin products. The limitations of the official methods (i.e. light microscopy and Polymerase Chain Reaction) suggest exploring new analytic ways to get reliable results in a short time. The combination of spectroscopic techniques with optical microscopy allows the development of an individual particle method able to meet both selectivity and sensitivity requirements (0.1%w/w). A spectroscopic method based on Fourier Transform micro-Raman spectroscopy coupled with Discriminant Analysis is here presented. This approach could be very useful for in-situ applications, such as customs inspections, since it drastically reduces time and costs of analysis. Copyright © 2017. Published by Elsevier Ltd.

  13. Conceptualizing impact assessment as a learning process

    International Nuclear Information System (INIS)

    Sánchez, Luis E.; Mitchell, Ross

    2017-01-01

    This paper explores how project developers and their consultants, government regulators and stakeholders can learn from the impact assessment (IA) process, thus potentially improving its effectiveness and enhancing project sustainability. Despite the benefits that learning can bring to an organization, failure to learn appears commonplace both within the IA process and, once approved, subsequent industrial development. To nurture organizational learning through IA, enabling structures that foster information sharing and interpretation and enhance organizational memory are needed. In this paper learning outcomes are grouped into three categories: acquisition of knowledge and skills, developing new behaviors and developing sustainability-oriented norms and values. Means to achieve such outcomes include education and training, experiential learning, learning through public participation (social learning) and a ‘learning organization approach’. Societal expectations increasingly demand not only projects that ‘pass’ the review criteria of regulators, financiers and the community, but IA processes capable of delivering sustainable outcomes that include learning and sharing of knowledge. It is proposed that learning be treated as a purposeful – not as an accidental – outcome of IA, and facilitated by adopting a ‘learning organization approach’ coupled with best practice such as early stakeholder engagement. - Highlights: • Proponents are challenged to develop projects that deliver sustainable outcomes. • Passing the test of government approval may be insufficient to obtain a social license. • Learning by all stakeholders is vital to meet these challenges. • Learning outcomes have to go beyond instrumental learning to reach new behaviors, norms and values. • A “learning organization approach” can promote mutual learning and improve project design.

  14. Conceptualizing impact assessment as a learning process

    Energy Technology Data Exchange (ETDEWEB)

    Sánchez, Luis E., E-mail: lsanchez@usp.br [Escola Politécnica, University of São Paulo, Av. Prof. Mello Moraes, 2373, 05508-900 São Paulo (Brazil); Mitchell, Ross, E-mail: ross.mitchell@ualberta.net [Shell International Exploration & Production BV (Netherlands)

    2017-01-15

    This paper explores how project developers and their consultants, government regulators and stakeholders can learn from the impact assessment (IA) process, thus potentially improving its effectiveness and enhancing project sustainability. Despite the benefits that learning can bring to an organization, failure to learn appears commonplace both within the IA process and, once approved, subsequent industrial development. To nurture organizational learning through IA, enabling structures that foster information sharing and interpretation and enhance organizational memory are needed. In this paper learning outcomes are grouped into three categories: acquisition of knowledge and skills, developing new behaviors and developing sustainability-oriented norms and values. Means to achieve such outcomes include education and training, experiential learning, learning through public participation (social learning) and a ‘learning organization approach’. Societal expectations increasingly demand not only projects that ‘pass’ the review criteria of regulators, financiers and the community, but IA processes capable of delivering sustainable outcomes that include learning and sharing of knowledge. It is proposed that learning be treated as a purposeful – not as an accidental – outcome of IA, and facilitated by adopting a ‘learning organization approach’ coupled with best practice such as early stakeholder engagement. - Highlights: • Proponents are challenged to develop projects that deliver sustainable outcomes. • Passing the test of government approval may be insufficient to obtain a social license. • Learning by all stakeholders is vital to meet these challenges. • Learning outcomes have to go beyond instrumental learning to reach new behaviors, norms and values. • A “learning organization approach” can promote mutual learning and improve project design.

  15. Hydroisomerization of n-Pentane over Pt/Mordenite Catalyst: Effect of Feed Composition and Process Conditions

    Directory of Open Access Journals (Sweden)

    Behrouz Bayati

    2016-04-01

    Full Text Available The hydroisomerization of pure n-pentane over H-mordenite supported Pt-catalyst was investigated in a fixed bed reactor by changing reaction parameters such as temperature, pressure, and WHSV, as well as the H2/HC ratio. The maximum yield of isopentane over Pt/mordenite catalyst was achieved at 220 °C and a relatively low reaction pressure. To address the effect of feed composition on the catalytic performance of the samples, the catalysts were assessed for activity and selectivity in the isomerization of a mixture consisting of n-pentane (70 wt.% and isopentane (30 wt.% at 220 °C. The effects of pressure, WHSV, and H2/HC ratio on the catalyst performance were also studied using binary mixtures of the pentane isomers as a feedstock. It was observed that an effect of WHSV and H2/HC on the catalytic performance was similar to its behavior in pure n-pentane isomerization, while the conversion of n-pentane in the binary mixture showed a different trend and had a minimum value at 1.5 bar. It could be due to the presence of isopentane in feed and adsorption phenomenon of binary mixture on mordenite-supported catalyst.

  16. RELEVANCE OF PROCESS RISK ASSESSMENT IN AIRLINES

    OpenAIRE

    Oksana G. Feoktistova; Igor K. Turkin; Sergey V. Barinov

    2017-01-01

    The notion of “the concept on assumed risk” that took over from the outdated concept of absolute security is analyzed, the increasing significance of operating risk assessment at the present stage is noted. Some basic risk assessment techniques are considered. Matrix technique of risk assessment is considered more thoroughly, and it may be used in risk assessment of airlines in the context of labour protection management system.The ability to correctly assess risks and develop appropriate pre...

  17. HLW Feed Delivery AZ101 Batch Transfer to the Private Contractor Transfer and Mixing Process Improvements [Initial Release at Rev 2

    Energy Technology Data Exchange (ETDEWEB)

    DUNCAN, G.P.

    2000-02-28

    The primary purpose of this business case is to provide Operations and Maintenance with a detailed transfer process review for the first High Level Waste (HLW) feed delivery to the Privatization Contractor (PC), AZ-101 batch transfer to PC. The Team was chartered to identify improvements that could be implemented in the field. A significant penalty can be invoked for not providing the quality, quantity, or timely delivery of HLW feed to the PC.

  18. Phenotypic relationships among methane production traits assessed under ad libitum feeding of beef cattle.

    Science.gov (United States)

    Bird-Gardiner, T; Arthur, P F; Barchia, I M; Donoghue, K A; Herd, R M

    2017-10-01

    Angus cattle from 2 beef cattle projects in which daily methane production (MPR) was measured were used in this study to examine the nature of the relationships among BW, DMI, and methane traits of beef cattle fed ad libitum on a roughage diet or a grain-based feedlot diet. In both projects methane was measured using the GreenFeed Emission Monitoring system, which provides multiple short-term breath measures of methane production. The data used for this study were from 119 Angus heifers over 15 d on a roughage diet and 326 Angus steers over 70 d on a feedlot diet. Mean (±SD) age, BW, and DMI were 372 ± 28 d, 355 ± 37 kg, and 8.1 ± 1.3 kg/d for the heifers and 554 ± 86 d, 577 ± 69 kg, and 13.3 ± 2.0 kg/d for the steers, respectively. The corresponding mean MPR was 212 g/d for heifers and 203 g/d for steers. Additional traits studied included methane yield (MY; MPR/DMI), methane intensity (MPR/BW), and 3 forms of residual methane production (RMP), which is a measure of actual minus predicted MPR. For RMP, RMP, and RMP predicted MPR were obtained by regression of MPR on BW, on DMI, and on both DMI and BW, respectively. The 2 data sets were analyzed separately using the same statistical procedures. For both feed types the relationships between MPR and DMI and between MPR and BW were both positive and linear. The correlation between MPR and DMI was similar to that between MPR and BW, although the correlations were stronger for the roughage diet ( = 0.75 for MPR vs. DMI; = 0.74 for MPR vs. BW) than the grain-based diet ( = 0.62 for MPR vs. DMI; = 0.66 for MPR vs. BW). The correlation between MY and DMI was negative and moderate for the roughage ( = -0.68) and grain-based ( = -0.59) diets, a finding that is different from the nonsignificant correlations reported in studies of cattle on a restricted roughage diet. The 3 RMP traits were strongly correlated ( values from 0.76 to 0.99) with each other for both the roughage and the grain-based diets, which indicates

  19. [HYGIENIC ASSESSMENT OF NUTRITION IN VEGETARIANS AND PEOPLE WITH MIXED FEEDING].

    Science.gov (United States)

    Yunatskaya, T A; Turchaninova, N S; Kostina, N N

    2015-01-01

    There was performed a comparative analysis of the actual nutrition of inhabitants of the city of Omsk with mixed feeding (n = 50), and representatives of different types of vegetarians: raw food diet (n = 12), veganism (n = 14), lacto-ovo vegetarians (n = 14). There were revealed differences in consumption of food and food substances in persons with different types of food. There was established insufficient energy value, reduced intake of protein, fats, carbohydrates, vitamin B12 in the diet of vegans and raw foodists. There was determined the availability of vitamin B12 by the analysis of this substance in the blood serum by mean of standard chemiluminescent immunoassay. Vitamin B12 deficiency was revealed in vegans and raw foodists. There were substantiated such basic directions ofelimination of the deficit of nutrients and calories in the diet of vegetarians as the careful planning and assortment of products, as well as the use of vitamin-mineral complexes.

  20. Optimization of the thermal conditions for processing hatchery waste eggs as meal for feed.

    Science.gov (United States)

    Chiu, W Z; Wei, H W

    2011-05-01

    The purpose of this study was to optimize the thermal conditions for processing hatchery waste eggs (HWE) into rich feedstuff with lower electricity consumption by using response surface methodology. In the study, the effects of processing temperature and time on HWE meal (HWEM) quality and production were evaluated. As the results indicate, optimization was obtained when the processing lasted for 23 h at the fixed temperature of 65°C, resulting in higher protein digestibility in vitro (89.6%) and DM (88.5%) content of HWEM with lower electricity consumption (82.4 kWh/60 kg of HWE). No significant differences existed between the quality values predicted by mathematical formulae and those obtained through practical analyses in DM (87 vs. 88.5%), CP (39.2 vs. 38.3%), protein digestibility in vitro (90.7 vs. 89.6%), and electricity consumed (80.8 vs. 82.4 kWh/60 kg of HWE). Furthermore, the product derived from the optimized processing conditions had better biosecurity; Salmonella spp. were not found and Escherichia coli levels were substantially reduced (from 10(7) to 10(4) cfu/g). In summary, HWEM of superior quality can be produced when the processing conditions optimized in the current research are utilized.

  1. Corrosion Testing of Monofrax K-3 Refractory in Defense Waste Processing Facility (DWPF) Alternate Reductant Feeds

    Energy Technology Data Exchange (ETDEWEB)

    Williams, M. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Jantzen, C. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Burket, P. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2016-04-06

    The Defense Waste Processing Facility (DWPF) at the Savannah River Site (SRS) uses a combination of reductants and oxidants while converting high level waste (HLW) to a borosilicate waste form. A reducing flowsheet is maintained to retain radionuclides in their reduced oxidation states which promotes their incorporation into borosilicate glass. For the last 20 years of processing, the DWPF has used formic acid as the main reductant and nitric acid as the main oxidant. During reaction in the Chemical Process Cell (CPC), formate and formic acid release measurably significant H2 gas which requires monitoring of certain vessel’s vapor spaces. A switch to a nitric acid-glycolic acid (NG) flowsheet from the nitric-formic (NF) flowsheet is desired as the NG flowsheet releases considerably less H2 gas upon decomposition. This would greatly simplify DWPF processing from a safety standpoint as close monitoring of the H2 gas concentration could become less critical. In terms of the waste glass melter vapor space flammability, the switch from the NF flowsheet to the NG flowsheet showed a reduction of H2 gas production from the vitrification process as well. Due to the positive impact of the switch to glycolic acid determined on the flammability issues, evaluation of the other impacts of glycolic acid on the facility must be examined.

  2. Dopaminergic modulation of effort-related choice behavior as assessed by a progressive ratio chow feeding choice task: pharmacological studies and the role of individual differences.

    Directory of Open Access Journals (Sweden)

    Patrick A Randall

    Full Text Available Mesolimbic dopamine (DA is involved in behavioral activation and effort-related processes. Rats with impaired DA transmission reallocate their instrumental behavior away from food-reinforced tasks with high response requirements, and instead select less effortful food-seeking behaviors. In the present study, the effects of several drug treatments were assessed using a progressive ratio (PROG/chow feeding concurrent choice task. With this task, rats can lever press on a PROG schedule reinforced by a preferred high-carbohydrate food pellet, or alternatively approach and consume the less-preferred but concurrently available laboratory chow. Rats pass through each ratio level 15 times, after which the ratio requirement is incremented by one additional response. The DA D(2 antagonist haloperidol (0.025-0.1 mg/kg reduced number of lever presses and highest ratio achieved but did not reduce chow intake. In contrast, the adenosine A(2A antagonist MSX-3 increased lever presses and highest ratio achieved, but decreased chow consumption. The cannabinoid CB1 inverse agonist and putative appetite suppressant AM251 decreased lever presses, highest ratio achieved, and chow intake; this effect was similar to that produced by pre-feeding. Furthermore, DA-related signal transduction activity (pDARPP-32(Thr34 expression was greater in nucleus accumbens core of high responders (rats with high lever pressing output compared to low responders. Thus, the effects of DA antagonism differed greatly from those produced by pre-feeding or reduced CB1 transmission, and it appears unlikely that haloperidol reduces PROG responding because of a general reduction in primary food motivation or the unconditioned reinforcing properties of food. Furthermore, accumbens core signal transduction activity is related to individual differences in work output.

  3. Assessment for Learning Tasks and the Peer Assessment Process

    Science.gov (United States)

    Lauf, Lorraine; Dole, Shelley

    2010-01-01

    A program of Assessment for Learning (AfL) was implemented with 107 Year 12 students as part of their preparation for a major external test. Students completed extended mathematics tasks and selected student responses were used for peer assessment purposes. This paper reports on two of the AfL elements, namely task selection and peer assessment as…

  4. AISI/DOE Advanced Process Control Program Vol. 3 of 6: Improved Liquid Steel Feeding for Slab Casters; FINAL

    International Nuclear Information System (INIS)

    Brent Isaacson; Mike Slepian; Thomas Richter

    1999-01-01

    This report describes the development, construction and testing of the Electromagnetic Valve System (EVS), conducted as a project entitled ''Improved Liquid Steel Feeding System for Slab Casters''. This program ran from November 1992 to January 1995. Many of the technical issues in bringing the EVS to the steel industry were identified and resolved during the course of the program. During this time, significant hardware improvements in Westinghouse's electromagnetic valve were made to easily integrate it with existing continuous casting processes,. An improved refractory nozzle was developed and tested which had superior thermal shock and anti-cracking performance. In addition, several trials were conducted with molten steel to verify the proof-of-principle of the electromagnetic valve and its auxiliary equipment. However, improvements in other conventional pouring technologies have greatly diminished the potential value of this project to the steel industry. A such, the program w as canceled by the American Iron and Steel Institute after the conclusion of Phase I

  5. Preliminary evaluation of Am/Cm melter feed preparation process upset recovery flowsheets

    International Nuclear Information System (INIS)

    Stone, M.E.

    2000-01-01

    This document summarizes the results from the development of flowsheets to recover from credible processing errors specified in TTR 99-MNSS/SE-006. The proposed flowsheets were developed in laboratory scale equipment and will be utilized with minor modifications for full scale demonstrations in the Am/Cm Pilot Facility

  6. The effect of feed made from fish processing waste silage on the ...

    African Journals Online (AJOL)

    Administrator

    2011-06-08

    Jun 8, 2011 ... silage from fish processing waste and fish products of low .... placed in bags and then stored in a deep freeze (at -18°C) until they ... rences were found in the behavior of the fish in the trial ... information about the percentage of silage that can be .... not change (Lie et al., 1988; Goncalves et al., 1989).

  7. Assessment of salient beliefs affecting mothers' intention to adherence to dietary diversity in their children's complementary feeding

    Directory of Open Access Journals (Sweden)

    Akram Karimi-Shahanjarini

    2017-01-01

    Full Text Available Background: Providing a variety of foods has been emphasized as one of the most important features of optimal complementary feeding. This study investigated key beliefs that guide mothers' intention to adherence to dietary diversity in their 1–2-year-old children's complementary feeding. Methods: This was a cross-sectional study involving 290 mothers (mean age = 27, standard deviation = 5.32 with child 1–2-year-old attending maternal and child health section of health centers in Rasht, Iran. To represent the socioeconomic status of the participants, 6 centers out of 15 were selected from three different socioeconomic areas (low-, middle-, and high-income areas. Mothers completed a questionnaire assessing intention and belief-based items of theory of planned behavior. Correlations and multiple regression analyses were performed. Results: The mean age of mothers was 27 ± 5.33 (27–43 years. Regression analyses revealed that among behavioral beliefs, the perception that adherence to dietary diversity would lead to improve children's growth was the significant predictor of intention (β = 0.13,P= 0.04. Regarding normative beliefs, perceived social pressure from health-care professionals to adherence to dietary diversity significantly predicted intention (β = 0.15,P= 0.01. Among control beliefs, the perception that daily pressures made difficult adherence to dietary diversity was the key determinant (β = 0.19,P= 0.01. Conclusions: Findings of this study represent the important beliefs that can be addressed in development planning aimed at modifying mothers' child complementary feeding practices.

  8. Assessment of Salient Beliefs Affecting Mothers' Intention to Adherence to Dietary Diversity in their Children's Complementary Feeding.

    Science.gov (United States)

    Karimi-Shahanjarini, Akram; Rahmani, Fatemeh; Roshanei, Ghodratollah; Mahdi Hazavehei, Seyyed M

    2017-01-01

    Providing a variety of foods has been emphasized as one of the most important features of optimal complementary feeding. This study investigated key beliefs that guide mothers' intention to adherence to dietary diversity in their 1-2-year-old children's complementary feeding. This was a cross-sectional study involving 290 mothers (mean age = 27, standard deviation = 5.32) with child 1-2-year-old attending maternal and child health section of health centers in Rasht, Iran. To represent the socioeconomic status of the participants, 6 centers out of 15 were selected from three different socioeconomic areas (low-, middle-, and high-income areas). Mothers completed a questionnaire assessing intention and belief-based items of theory of planned behavior. Correlations and multiple regression analyses were performed. The mean age of mothers was 27 ± 5.33 (27-43 years). Regression analyses revealed that among behavioral beliefs, the perception that adherence to dietary diversity would lead to improve children's growth was the significant predictor of intention (β = 0.13, P = 0.04). Regarding normative beliefs, perceived social pressure from health-care professionals to adherence to dietary diversity significantly predicted intention (β = 0.15, P = 0.01). Among control beliefs, the perception that daily pressures made difficult adherence to dietary diversity was the key determinant (β = 0.19, P = 0.01). Findings of this study represent the important beliefs that can be addressed in development planning aimed at modifying mothers' child complementary feeding practices.

  9. Assessment of Salient Beliefs Affecting Mothers’ Intention to Adherence to Dietary Diversity in their Children's Complementary Feeding

    Science.gov (United States)

    Karimi-Shahanjarini, Akram; Rahmani, Fatemeh; Roshanei, Ghodratollah; Mahdi Hazavehei, Seyyed M.

    2017-01-01

    Background: Providing a variety of foods has been emphasized as one of the most important features of optimal complementary feeding. This study investigated key beliefs that guide mothers’ intention to adherence to dietary diversity in their 1–2-year-old children's complementary feeding. Methods: This was a cross-sectional study involving 290 mothers (mean age = 27, standard deviation = 5.32) with child 1–2-year-old attending maternal and child health section of health centers in Rasht, Iran. To represent the socioeconomic status of the participants, 6 centers out of 15 were selected from three different socioeconomic areas (low-, middle-, and high-income areas). Mothers completed a questionnaire assessing intention and belief-based items of theory of planned behavior. Correlations and multiple regression analyses were performed. Results: The mean age of mothers was 27 ± 5.33 (27–43 years). Regression analyses revealed that among behavioral beliefs, the perception that adherence to dietary diversity would lead to improve children's growth was the significant predictor of intention (β = 0.13, P = 0.04). Regarding normative beliefs, perceived social pressure from health-care professionals to adherence to dietary diversity significantly predicted intention (β = 0.15, P = 0.01). Among control beliefs, the perception that daily pressures made difficult adherence to dietary diversity was the key determinant (β = 0.19, P = 0.01). Conclusions: Findings of this study represent the important beliefs that can be addressed in development planning aimed at modifying mothers’ child complementary feeding practices. PMID:28479970

  10. Radionuclides in Animal Feed (Poultry) 'Assessment of Radiation Dose'

    Energy Technology Data Exchange (ETDEWEB)

    Algadi, S.; Salih, I. [Radiation Safety Institute (Sudan)

    2014-07-01

    In this work a comprehensive study has been carried out for the determination of presents evaluation of effective dose due to consumption of chicken fed by fodders collected from four major Sudanese companies (Hader, Koudjs, Wifi and Preconex SPN.V). The concentrations of radionuclides in the thirty two (32) feed samples have been determined by gamma spectrometry using NaI(Tl) detector. Radionuclides observed were: Pb-212 (daughter of Th-238), Pb-214, Bi-214 (daughters of U-238), Cs-137 and K-40 concentration. In additives the activity concentration of these radionuclides has found in the following ranges: 0.81 - 22.06 Bq/kg, 0.59 - 32.07 Bq/kg, 0.64 - 15.77 Bq/kg, 0.01 - 2.02 Bq/kg and 33.58 - 204.61 Bq/kg respectively. In feed concentrates activity concentration ranges has: 0.73 - 13.79 Bq/kg, 0.33 - 20.04 Bq/kg, 0.01 - 1.67 Bq/kg, 0.01 - 0.28 Bq/kg, 26.86 - 99.21 Bq/kg respectively. In fodders the activity concentration ranges has: 1.25 - 1.52 Bq/kg, 0.12 - 1.24 Bq/kg, 0.51 - 1.25 Bq/kg, 0.01 - 0.61 Bq/kg, 11.94 - 127.88 Bq/kg respectively. The 'animal product' activity concentration ranges has: 0.31 - 1.65 Bq/kg, 0.22 - 1.11 Bq/kg, 0.26 - 1.07 Bq/kg, 0.03 - 0.51 Bq/kg, 14.07 - 79.93 Bq/kg respectively. High concentrations (233.3 Bq/Kg) has typically found in toxo(additive); the lowest concentration (27.9 Bq/Kg ) has found in concentrate for layers and animal product. The total average effective dose due to the different feed-stuff has estimated and found to be 5.89x10{sup -6}±3.11x10{sup -6}mSv/y and 13.9 x 10{sup -7} ± 7.24 x 10{sup -7}mSv/y for age categories 7-12 y and >17 y respectively. If compared with the limits - Radioactivity Levels Permitted in foodstuffs Part 1 the Saudi Standards, Metrology and quality (300 Bq/Kg) and ICRP,FAO organization (5 mSv/y) - these values are very low. Document available in abstract form only. (authors)

  11. Exploring barriers and enablers for scaling up a community-based grain bank intervention for improved infant and young child feeding in Ethiopia: A qualitative process evaluation.

    Science.gov (United States)

    Sako, Binta; Leerlooijer, Joanne N; Lelisa, Azeb; Hailemariam, Abebe; Brouwer, Inge D; Tucker Brown, Amal; Osendarp, Saskia J M

    2018-04-01

    Child malnutrition remains high in Ethiopia, and inadequate complementary feeding is a contributing factor. In this context, a community-based intervention was designed to provide locally made complementary food for children 6-23 months, using a bartering system, in four Ethiopian regions. After a pilot phase, the intervention was scaled up from 8 to 180 localities. We conducted a process evaluation to determine enablers and barriers for the scaling up of this intervention. Eight study sites were selected to perform 52 key informant interviews and 31 focus group discussions with purposely selected informants. For analysis, we used a framework describing six elements of successful scaling up: socio-political context, attributes of the intervention, attributes of the implementers, appropriate delivery strategy, the adopting community, and use of research to inform the scale-up process. A strong political will, alignment of the intervention with national priorities, and integration with the health care system were instrumental in the scaling up. The participatory approach in decision-making reinforced ownership at community level, and training about complementary feeding motivated mothers and women's groups to participate. However, the management of the complex intervention, limited human resources, and lack of incentives for female volunteers proved challenging. In the bartering model, the barter rate was accepted, but the bartering was hindered by unavailability of cereals and limited financial and material resources to contribute, threatening the project's sustainability. Scaling up strategies for nutrition interventions require sufficient time, thorough planning, and assessment of the community's capacity to contribute human, financial, and material resources. © 2017 The Authors. Maternal and Child Nutrition Published by John Wiley & Sons, Ltd.

  12. Petitioning process for irradiated foods and animal feeds in North America

    International Nuclear Information System (INIS)

    Marcotte, M.; Kunstadt, P.

    1993-01-01

    The lack of sufficient regulatory approvals continues to delay the commercial application of food irradiation in several countries. Often, the regulatory approval process itself appears too challenging and approvals are not even requested. The objective of this paper is to review petition requirements so that researchers and companies in other countries will be able to prepare petitions requesting approval for the import and sale of irradiated foods into North America. (author)

  13. Use of drum driers for processing various industrial wastes into high-grade animal feeding stuffs

    Energy Technology Data Exchange (ETDEWEB)

    Fritze, H

    1976-01-01

    Strict anti-pollution legislation governing admissible effluent concentrations and high charges are forcing certain industries (potato starch and dried potato flake factories, sugar factories and dairies) to install facilities for recovering valuable substances, which are used mainly as fodder. In this way the effluent charges can be reduced and a return is obtained on the investment and operating costs. Processes are described whereby such substances can be extracted efficiently when using Escher Wyss drum driers.

  14. DEVELOPMENT OF A VIRTUAL 3D-SIMULATOR OF THE FEED PELLETING TECHNOLOGICAL PROCESS

    Directory of Open Access Journals (Sweden)

    N. Shcherbakov

    2017-08-01

    Full Text Available The process of developing a virtual 3D simulator of the process of granulation of mixed fodders is considered. The consequences of errors in the operation of press granulator operators are considered. The difficulties associated with the training of high-tech and expensive equipment operators are described. The necessity and described difficulties of acquiring practical skills of working with such equipment at the training stage are substantiated. It is argued the need to introduce computer simulators in educational institutions in order to improve the quality of the acquired knowledge, form a complex decision-making skill for future operators of technological processes. The results of a survey on improving the efficiency of management of technological processes after the introduction of simulators at enterprises are considered. The data of the simulator market and its forecasts for 2017 by regions and types of the interface used are presented. The conclusion is drawn about the growing popularity of simulators based on the 3D interface. The advantage of using the 3D interface with respect to the 2D interface is substantiated. The types of immersion in the learning environment in various simulator interfaces are considered. The vulnerabilities of the 3D simulator are noted. The goal is to develop a 3D simulator for a press granulator operator. A solution of a set of tasks is proposed to achieve this goal. The plan for creating a simulator was developed. A detailed consideration of the development stages of the simulator is given. The possibilities of using the simulator being developed are considered. The possibility of developing a simulator of emergency situations is described. The relevance of this development is justified.

  15. Biogas feed analysis

    OpenAIRE

    Song, Yuan

    2008-01-01

    Biogas production is regarded as the best energy recovery process from wet organic solid wastes (WOSW). Feed composition, storage conditions and time will influence the compositions of feed to biogas processes. In this study, apple juice from Meierienes Juice factory was used as the model substrates to mimic the liquid phase that can be extracted from fruit or juice industry WOSW. A series of batch experiments were carried out with different initial feed concentrations (0, 1, 2, 5, 10 %) of a...

  16. The effect of feed rate and recycle rate variable on leaching process of Na2Zro3 with HCl in continuous stirred tank reactor (CSTR) series

    Science.gov (United States)

    Palupi, Bekti; Supranto, Sediawan, Wahyudi Budi; Setyadji, Moch.

    2017-05-01

    This time, the natural resources of zircon sand is processed into several zirconium products which is utilized for various industries, such as ceramics, glass industry, metal industry and nuclear industry. The process of zircon sand into zirconium products through several stages, one of them is leaching process of Na2ZrO3 with HCl. In this research, several variations of recycle-rate/feed-rate had been done to determine the effect on leaching process. The leaching was processed at temperature of 90°C, ratio of Na2ZrO3:HCl = 1g:30mL, and 142 rotary per minute of stirring speed for 30 minutes with variation of recycle-rate/feed-rate such as 0.478, 0.299, 0.218, 0.171 and 0.141. The diameter size of Na2ZrO3 powder that used are 0.088 to 0.149 mm. This process was carried out in Continuous Stirred Tank Reactor (CSTR) series with recycle. Based on this research, the greater of the recycle-rate/feed-rate variable, the obtained Zr recovery decreased. The correlation between recycle-rate/feed-rate and Zr recovery is shown by the equation y = -146.91x + 103.51, where y is the Zr recovery and x is the recycle-rate/feed-rate. The highest Zr recovery was 90.52% obtained at recycle-rate/feed-rate 0.141. The mathematical modeling involving the probability model P(r) = 2β2r2 exp(-βr2) can be applied to this leaching process with Sum of Squared Errors (SSE) values in the range of 6×10-7 - 7×10-6.

  17. Behavioral Pediatrics Feeding Assessment Scale in Young Children With Autism Spectrum Disorder: Psychometrics and Associations With Child and Parent Variables.

    Science.gov (United States)

    Allen, Stephanie L; Smith, Isabel M; Duku, Eric; Vaillancourt, Tracy; Szatmari, Peter; Bryson, Susan; Fombonne, Eric; Volden, Joanne; Waddell, Charlotte; Zwaigenbaum, Lonnie; Roberts, Wendy; Mirenda, Pat; Bennett, Teresa; Elsabbagh, Mayada; Georgiades, Stelios

    2015-07-01

    The factor structure and validity of the Behavioral Pediatrics Feeding Assessment Scale (BPFAS; Crist & Napier-Phillips, 2001) were examined in preschoolers with autism spectrum disorder (ASD). Confirmatory factor analysis was used to examine the original BPFAS five-factor model, the fit of each latent variable, and a rival one-factor model. None of the models was adequate, thus a categorical exploratory factor analysis (CEFA) was conducted. Correlations were used to examine relations between the BPFAS and concurrent variables of interest. The CEFA identified an acceptable three-factor model. Correlational analyses indicated that feeding problems were positively related to parent-reported autism symptoms, behavior problems, sleep problems, and parenting stress, but largely unrelated to performance-based indices of autism symptom severity, language, and cognitive abilities, as well as child age. These results provide evidence supporting the use of the identified BPFAS three-factor model for samples of young children with ASD. © The Author 2015. Published by Oxford University Press on behalf of the Society of Pediatric Psychology. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  18. The probabilistic model of the process mixing of animal feed ingredients into a continuous mixer-reactor

    Directory of Open Access Journals (Sweden)

    L. I. Lytkina

    2016-01-01

    Full Text Available A mathematical model of the polydisperse medium mixing process reflects its stochastic features in the form of uneven distribution of phase elements on the time of their presence in apparatus, particle size, ripple retention of the apparatus, random distribution of the material and thermal phase flows of the working volume, heterogeneity of the medium physical- and chemical properties, complicated by chemical reaction. For the mathematical description of the mixing process of animal feed ingredients in the presence of chemical reaction the system of differential equations of Academician V.V. Kafarov was used. Proposed by him hypothesis based on the theory of Markov’s processes stating that "any multicomponent mixture can be considered as the result of an iterative process of mixing the two components to achieve the desired uniformity of all the ingredients in the mixture" allows us to consider a process of mixing binary composition in a paddle mixer in the form of differential equations of two ingredients concentration numerous changes until it becomes a homogenous mixture. It was found out that the mixing process of the two-component mixture is determined in a paddle mixer with a constant mixing speed and a limit (equilibrium dispersion of the ingredients in the mixture i.e. with its uniformity. Adjustment of the model parameters was carried out according to the results of experimental studies on mixing the crushed wheat with metallomagnetic impurity, which was a key (indicator component. According to the best values of the constant of the continuous mixing speed and the equilibrium disperse values of the ingredients contents, the mathematical model parameters identification was carried out. The results obtained are used to develop a new generation mixer design.

  19. Using in vitro/in silico data for consumer safety assessment of feed flavoring additives e A feasibility study using piperine

    NARCIS (Netherlands)

    Thiel, A.; Etheve, S.; Fabian, E.; Leeman, W.R.; Plautz, J.R.

    2015-01-01

    Consumer health risk assessment for feed additives is based on the estimated human exposure to the additive that may occur in livestock edible tissues compared to its hazard.We present an approach using alternative methods for consumer health risk assessment. The aim was to use the fewest possible

  20. The work of the European Union Reference Laboratory for Food Additives (EURL) and its support for the authorisation process of feed additives in the European Union: a review

    Science.gov (United States)

    von Holst, Christoph; Robouch, Piotr; Bellorini, Stefano; de la Huebra, María José González; Ezerskis, Zigmas

    2016-01-01

    ABSTRACT This paper describes the operation of the European Union Reference Laboratory for Feed Additives (EURL) and its role in the authorisation procedure of feed additives in the European Union. Feed additives are authorised according to Regulation (EC) No. 1831/2003, which introduced a completely revised authorisation procedure and also established the EURL. The regulations authorising feed additives contain conditions of use such as legal limits of the feed additives, which require the availability of a suitable method of analysis for official control purposes under real world conditions. It is the task of the EURL to evaluate the suitability of analytical methods as proposed by the industry for this purpose. Moreover, the paper shows that one of the major challenges is the huge variety of the methodology applied in feed additive analysis, thus requiring expertise in quite different analytical areas. In order to cope with this challenge, the EURL is supported by a network of national reference laboratories (NRLs) and only the merged knowledge of all NRLs allows for a scientifically sound assessment of the analytical methods. PMID:26540604

  1. Rockfall Hazard Process Assessment : Implementation Report

    Science.gov (United States)

    2017-10-01

    The Montana Department of Transportation (MDT) commissioned a new research program to improve assessment and management of its rock slope assets. The Department implemented a Rockfall Hazard Rating System (RHRS) program in 2005 and wished to add valu...

  2. Corrosion of Alloy 690 process pot by sulfate containing high level radioactive waste at feed stage

    International Nuclear Information System (INIS)

    Sengupta, P.; Soudamini, N.; Kaushik, C.P.; Jagannath; Mishra, R.K.; Kale, G.B.; Raj, K.; Das, D.; Sharma, B.P.

    2008-01-01

    Prolonged exposure of Alloy 690 process pot to sulfate containing high level radioactive waste leads to (a) depletion of Cr from the alloy, (b) intergranular attack and (c) building up of Cr 2 O 3 -Ni 2 O 3 -Fe 2 O 3 mixed oxide surface layer containing Na and Cs sulfate precipitates. Time dependence of material loss from Alloy 690 is found to follow a linear relationship of the type Δw (material loss) = -7.05 + 0.05t. Corrosion rate calculated for 2400 h exposure is 3.66 mpy. Cr and Ni leach rates obtained for the same sample are 1.61 g m -2 d -1 and 2.52 g m -2 d -1 , respectively. Ni leach rates followed a linear time dependence relationship of the type dNL Ni /dt (leach rate) = -0.09 + 0.027t, whereas Cr leach rates obeyed a non-linear relationship of the type dNL Cr /dt (leach rate) = 0.241 + 0.027t - 1.33 x 10 -4 t 1/2

  3. Suitability of saliva cortisol as a biomarker for hypothalamic-pituitary-adrenal axis activation assessment, effects of feeding actions, and immunostimulatory challenges in dairy cows

    DEFF Research Database (Denmark)

    Schwinn, A. -C.; Knight, C. H.; Bruckmaier, R. M.

    2016-01-01

    , current research focuses on noninvasive sampling of media other than blood, for example, saliva. The aim of this study was to assess the suitability of saliva cortisol as a biomarker under different physiological and immunological states in dairy cows. Our objectives were to 1) evaluate the relationship...... between HPA axis activation and saliva cortisol concentration, 2) investigate effects of some feeding action (as influenced by feed and water consumption) on saliva cortisol concentration, and 3) evaluate the time lag between plasma and saliva cortisol during induced inflammatory conditions...... administration. Saliva and blood samples were taken before, during, and after drinking, feeding, and ruminating. Only a low correlation between saliva and plasma cortisol concentrations (r = 0.03, P = 0.83) but no significant effects of the different feeding actions on saliva cortisol were observed. When...

  4. Assessment Moderation in an Australian Context: Processes, Practices, and Challenges

    Science.gov (United States)

    Beutel, Denise; Adie, Lenore; Lloyd, Margaret

    2017-01-01

    Moderation is a quality assurance process that plays a central role in the teaching, learning, and assessment cycle in higher education. While there is a growing body of research globally on teaching, learning, and, to a lesser degree, assessment in higher education, the process of moderation of assessment has received even less attention. In a…

  5. Geosphere process report for the safety assessment SR-Site

    International Nuclear Information System (INIS)

    Skagius, Kristina

    2010-11-01

    This report documents geosphere processes identified as relevant to the long-term safety of a KBS-3 repository, and forms an important part of the reporting of the safety assessment SR-Site. The detailed assessment methodology, including the role of the process reports in the assessment, is described in the SR-Site Main report /SKB 2011/

  6. Geosphere process report for the safety assessment SR-Site

    Energy Technology Data Exchange (ETDEWEB)

    Skagius, Kristina (ed.) (Kemakta Konsult AB, Stockholm (Sweden))

    2010-11-15

    This report documents geosphere processes identified as relevant to the long-term safety of a KBS-3 repository, and forms an important part of the reporting of the safety assessment SR-Site. The detailed assessment methodology, including the role of the process reports in the assessment, is described in the SR-Site Main report /SKB 2011/

  7. Rockfall Hazard Process Assessment : Final Project Report

    Science.gov (United States)

    2017-10-01

    After a decade of using the Rockfall Hazard Rating System (RHRS), the Montana Department of Transportation (MDT) sought a reassessment of their rockfall hazard evaluation process. Their prior system was a slightly modified version of the RHRS and was...

  8. River Protection Project waste feed delivery program technical performance measurement assessment plan

    International Nuclear Information System (INIS)

    O'TOOLE, S.M.

    1999-01-01

    This plan establishes a formal technical performance-monitoring program. Technical performance is assessed by establishing requirements based performance goals at the beginning of a program and routinely evaluating progress in meeting these goals at predetermined milestones throughout the project life cycle

  9. New assessment of feed water piping in GKN I including optimisation of piping supports

    International Nuclear Information System (INIS)

    Zaiss, W.; Heil, C.; Baier, B.; Manke, A.

    2003-01-01

    The quality of nuclear power plant components and piping is specified according to the then current state of knowledge. In operation, the quality can be reduced by ageing phenomena, so in-service quality assessment is constantly required. The contribution discusses the individual aspects of reassessment and its technical procedure, using the example of a feedwater pipe in the GKN I containment. (orig.) [de

  10. Process Waste Assessment for the Plotting and Digitizing Support Laboratory

    International Nuclear Information System (INIS)

    Phillips, N.M.

    1994-04-01

    This Process Waste Assessment was conducted to evaluate the Plotting and Digitizing Support Laboratory, located in Building 913, Room 157. It documents the processes, identifies the hazardous chemical waste streams generated by these processes, recommends possible ways to minimize waste, and serves as a reference for future assessments of this facility

  11. Assessment of School Principals' Reassignment Process

    Science.gov (United States)

    Sezgin-Nartgün, Senay; Ekinci, Serkan

    2016-01-01

    This study aimed to identify administrators' views related to the assessment of school principals' reassignment in educational organizations. The study utilized qualitative research design and the study group composed of 8 school administrators selected via simple sampling who were employed in the Bolu central district in 2014-2015 academic year.…

  12. Assessment of Uretek deep injection process.

    Science.gov (United States)

    2015-03-01

    This project assesses the capacity of an in-situ urethane stabilized soil mass to halt subsidence on an Interstate highway. : An area of subsidence is approximately 100 meters long in the southbound barrel of I- from mile marker 0.124 to 0.153 in : H...

  13. NUCLEOTIDES IN INFANT FEEDING

    Directory of Open Access Journals (Sweden)

    L.G. Mamonova

    2007-01-01

    Full Text Available The article reviews the application of nucleotides-metabolites, playing a key role in many biological processes, for the infant feeding. The researcher provides the date on the nucleotides in the women's milk according to the lactation stages. She also analyzes the foreign experience in feeding newborns with nucleotides-containing milk formulas. The article gives a comparison of nucleotides in the adapted formulas represented in the domestic market of the given products.Key words: children, feeding, nucleotides.

  14. Obsolescence Risk Assessment Process Best Practice

    OpenAIRE

    Romero Rojo, Francisco Javier; Roy, Rajkumar; Kelly, S.

    2013-01-01

    A component becomes obsolete when it is no longer available from the original manufacturer to the original specification. In long-lifecycle projects, obsolescence has become a major problem as it prevents the maintenance of the system. This is the reason why obsolescence management is now an essential part of the product support activities in sectors such as defence, aerospace, nuclear and railway; where systems need to be supported for several decades. The obsolescence risk assessment for th...

  15. 398 ASSESSMENT OF WETLAND VALUATION PROCESSES FOR ...

    African Journals Online (AJOL)

    Osondu

    This study therefore examined the processes involved in the valuation of wetland resources for ... of the subsistence uses of wetland resources are also not ... hydrological cycle, playing a key role in the provision ..... Management Strategies at the River Basin Scale. A ... Using. GIS: A Thesis Submitted to the Graduate Faculty.

  16. Assessment of Navy Contract Management Processes

    Science.gov (United States)

    2016-04-30

    capability? • 85% of quality problems are related to processes, while only 15% of problems are controlled by individual workers ( Deming , 1986...eligible participants: 369 • Total surveys completed: 185 • Response rate: 50% CONTRACT MANAGEMENT MATURITY MODEL© MATURITY LEVEL 5...Measurement – Organizations systematically use performance metrics to measure the quality and evaluate the effectiveness of the contract management

  17. Assessment of d-RDF processing costs

    International Nuclear Information System (INIS)

    1993-01-01

    The objectives of the project are:- to define on optimum process flowline for the production of a densified (a hard pellet) form of refuse derived fuel, d-RDF, which includes an aerobic composting module and a non-ferrous metal module; to produce capital and operating cost data; to develop a computer model for economic analysis of the systems; and to develop a computer model for the economic analysis the system with the addition of an Anaerobic Digestion module. (author)

  18. Survivability Assessment: Modeling A Recovery Process

    OpenAIRE

    Paputungan, Irving Vitra; Abdullah, Azween

    2009-01-01

    Survivability is the ability of a system to continue operating, in a timely manner, in the presence ofattacks, failures, or accidents. Recovery in survivability is a process of a system to heal or recover from damageas early as possible to fulfill its mission as condition permit. In this paper, we show a preliminary recoverymodel to enhance the system survivability. The model focuses on how we preserve the system and resumes itscritical service under attacks as soon as possible.Keywords: surv...

  19. The Automation of Nowcast Model Assessment Processes

    Science.gov (United States)

    2016-09-01

    secondly, provide modelers with the information needed to understand the model errors and how their algorithm changes might mitigate these errors. In...by ARL modelers. 2. Development Environment The automation of Point-Stat processes (i.e., PSA) was developed using Python 3.5.* Python was selected...because it is easy to use, widely used for scripting, and satisfies all the requirements to automate the implementation of the Point-Stat tool. In

  20. Food and feed chemical contaminants in the European Union: Regulatory, scientific, and technical issues concerning chemical contaminants occurrence, risk assessment, and risk management in the European Union.

    Science.gov (United States)

    Silano, Marco; Silano, Vittorio

    2017-07-03

    A priority of the European Union is the control of risks possibly associated with chemical contaminants in food and undesirable substances in feed. Following an initial chapter describing the main contaminants detected in food and undesirable substances in feed in the EU, their main sources and the factors which affect their occurrence, the present review focuses on the "continous call for data" procedure that is a very effective system in place at EFSA to make possible the exposure assessment of specific contaminants and undesirable substances. Risk assessment of contaminants in food atances in feed is carried currently in the European Union by the CONTAM Panel of EFSA according to well defined methodologies and in collaboration with competent international organizations and with Member States.

  1. Feeding Tubes

    Science.gov (United States)

    ... feeding therapies have been exhausted. Please review product brand and method of placement carefully with your physician ... Total Parenteral Nutrition. Resources: Oley Foundation Feeding Tube Awareness Foundation Children’s Medical Nutrition Alliance APFED’s Educational Webinar ...

  2. Modeling of Biogas Production Process from Cow Manure with Completely Stirred Tank Reactor under Semi Continuously Feeding

    Directory of Open Access Journals (Sweden)

    J Taghinazhad

    2018-03-01

    Full Text Available Introduction Anaerobic digestion (AD is a process of breaking down organic matter, such as manure, in the absence of oxygen by concerted action of various groups of anaerobic bacteria. The AD process generates biogas, an important renewable energy source that is composed mostly of methane (CH4, and carbon dioxide (CO2 which can be used as an energy source. Biogas originates from biogenic material and is therefore a type of biofuel. Enhancement of biogas production from cattle dung or animal wastes by co-digesting with crop residues like sugarcane stalk, maize stalks, rice straw, cotton stalks, wheat straw, water hyacinth, onion waste and oil palm fronds as well as with liquid waste effluent such as palm oil mill effluent. Nevertheless, the search for cost effective and environmentally friendly methods of enhancing biogas generation (i.e. biogas yield still needs to be further investigated. Many workers have studied the reaction kinetics of biogas production and developed kinetic models for the anaerobic digestion process. Objective of this study is to investigate the effect of biological additive using of organic loading rate (OLR in biogas production from cow dung. In addition, cumulative biogas production was simulated using logistic growth model, and modified Gompertz models, respectively. Materials and Methods The study was performed in 2015-2016 at the agricultural research center of Ardabil Province, Moghan (39.39 °N, 48.88° E. Fresh cow manure used for this research was collected from the research farm of the Institute for Animal Breeding and Animal Husbandry, Moghan. It was kept in 30 l containers at ambient temperature until fed to the reactors. In this study, experiments were conducted to investigate the biogas production from anaerobic digestion of cow manure (CM with effect of organic loading rate (OLR at mesophilic temperature (35°C±2 in a long time experiment with completely stirred tank reactor (CSTR under semi continuously

  3. REMOTE SENSING IMAGE QUALITY ASSESSMENT EXPERIMENT WITH POST-PROCESSING

    Directory of Open Access Journals (Sweden)

    W. Jiang

    2018-04-01

    Full Text Available This paper briefly describes the post-processing influence assessment experiment, the experiment includes three steps: the physical simulation, image processing, and image quality assessment. The physical simulation models sampled imaging system in laboratory, the imaging system parameters are tested, the digital image serving as image processing input are produced by this imaging system with the same imaging system parameters. The gathered optical sampled images with the tested imaging parameters are processed by 3 digital image processes, including calibration pre-processing, lossy compression with different compression ratio and image post-processing with different core. Image quality assessment method used is just noticeable difference (JND subject assessment based on ISO20462, through subject assessment of the gathered and processing images, the influence of different imaging parameters and post-processing to image quality can be found. The six JND subject assessment experimental data can be validated each other. Main conclusions include: image post-processing can improve image quality; image post-processing can improve image quality even with lossy compression, image quality with higher compression ratio improves less than lower ratio; with our image post-processing method, image quality is better, when camera MTF being within a small range.

  4. Feed safety in the feed supply chain

    Directory of Open Access Journals (Sweden)

    Pinotti, L.

    2011-01-01

    Full Text Available A number of issues have weakened the public's confidence in the quality and wholesomeness of foods of animal origin. As a result farmers, nutritionists, industry and governments have been forced to pay serious attention to animal feedstuff production processes, thereby acknowledging that animal feed safety is an essential prerequisite for human food safety. Concerns about these issues have produced a number of important effects including the ban on the use of processed animal proteins, the ban on the addition of most antimicrobials to farm animals diets for growth‐promotion purposes, and the implementation of feed contaminant regulations in the EU. In this context it is essential to integrate knowledge on feed safety and feed supply. Consequently, purchase of new and more economic sources of energy and protein in animal diets, which is expected to conform to adequate quality, traceability, environmental sustainability and safety standards, is an emerging issue in livestock production system.

  5. The Influences of Percent of Tributyl Phosphate and Ratio of Feed and Solvent on the Uranium-Thorium Extraction of Thorex Process

    International Nuclear Information System (INIS)

    Setyadji, Moch; Endang Susiantini

    2002-01-01

    The investigation of uranium and thorium extraction in water phase of thorex process first cycle using tributyl phosphate diluted in kerosine as extractant has been done. The one stage extractor was used. The effects of percent of tributyl phosphate and ratio of feed and solvent on the extraction efficiency and distribution coefficients of uranium and thorium were studied. The result of experiment showed that percent of tributyl phosphate and ratio of feed and solvent very influence on the extraction efficiency and distribution coefficients of uranium and thorium. The best results were reached at about 55% of tributyl phosphate and ratio of feed and solvent was 1:3. The extraction efficiencies of uranium and thorium and distribution coefficients of uranium and thorium at the condition above were 90% , 90.4% , 9.0 and 9.4. (author)

  6. EFSA Panel on Genetically Modified Organisms (GMO); Draft Scientific Opinion on the assessment of allergenicity of GM plants and microorganisms and derived food and feed

    DEFF Research Database (Denmark)

    Sørensen, Ilona Kryspin

    The weight-of-evidence, case-by-case approach is considered the most appropriate way of assessing the allergenicity of genetically modified (GM) food and feed. This scientific opinion discusses various aspects to increase the strength and accuracy of this approach, including the latest developments...

  7. Sustaining Innovation: Developing an Instructional Technology Assessment Process

    Science.gov (United States)

    Carmo, Monica Cristina

    2013-01-01

    This case study developed an instructional technology assessment process for the Gevirtz Graduate School of Education (GGSE). The theoretical framework of Adelman and Taylor (2001) guided the development of this instructional technology assessment process and the tools to aid in its facilitation. GGSE faculty, staff, and graduate students…

  8. Momentary assessment of interpersonal process in psychotherapy.

    Science.gov (United States)

    Thomas, Katherine M; Hopwood, Christopher J; Woody, Erik; Ethier, Nicole; Sadler, Pamela

    2014-01-01

    To demonstrate how a novel computer joystick coding method can illuminate the study of interpersonal processes in psychotherapy sessions, we applied it to Shostrom's (1966) well-known films in which a client, Gloria, had sessions with 3 prominent psychotherapists. The joystick method, which records interpersonal behavior as nearly continuous flows on the plane defined by the interpersonal dimensions of control and affiliation, provides an excellent sampling of variability in each person's interpersonal behavior across the session. More important, it yields extensive information about the temporal dynamics that interrelate clients' and therapists' behaviors. Gloria's 3 psychotherapy sessions were characterized using time-series statistical indices and graphical representations. Results demonstrated that patterns of within-person variability tended to be markedly asymmetric, with a predominant, set-point-like interpersonal style from which deviations mostly occurred in just 1 direction (e.g., occasional submissive departures from a modal dominant style). In addition, across each session, the therapist and client showed strongly cyclical variations in both control and affiliation, and these oscillations were entrained to different extents depending on the therapist. We interpreted different patterns of moment-to-moment complementarity of interpersonal behavior in terms of different therapeutic goals, such as fostering a positive alliance versus disconfirming the client's interpersonal expectations. We also showed how this method can be used to provide a more detailed analysis of specific shorter segments from each of the sessions. Finally, we compared our approach to alternative techniques, such as act-to-act lagged relations and dynamic systems and pointed to a variety of possible research and training applications. (PsycINFO Database Record (c) 2014 APA, all rights reserved).

  9. Assessing an effective feeding strategy to optimize crude glycerol utilization as sustainable carbon source for lipid accumulation in oleaginous yeasts.

    Science.gov (United States)

    Signori, Lorenzo; Ami, Diletta; Posteri, Riccardo; Giuzzi, Andrea; Mereghetti, Paolo; Porro, Danilo; Branduardi, Paola

    2016-05-05

    Microbial lipids can represent a valuable alternative feedstock for biodiesel production in the context of a viable bio-based economy. This production can be driven by cultivating some oleaginous microorganisms on crude-glycerol, a 10% (w/w) by-product produced during the transesterification process from oils into biodiesel. Despite attractive, the perspective is still economically unsustainable, mainly because impurities in crude glycerol can negatively affect microbial performances. In this view, the selection of the best cell factory, together with the development of a robust and effective production process are primary requirements. The present work compared crude versus pure glycerol as carbon sources for lipid production by three different oleaginous yeasts: Rhodosporidium toruloides (DSM 4444), Lipomyces starkeyi (DSM 70295) and Cryptococcus curvatus (DSM 70022). An efficient yet simple feeding strategy for avoiding the lag phase caused by growth on crude glycerol was developed, leading to high biomass and lipid production for all the tested yeasts. Flow-cytometry and fourier transform infrared (FTIR) microspectroscopy, supported by principal component analysis (PCA), were used as non-invasive and quick techniques to monitor, compare and analyze the lipid production over time. Gas chromatography (GC) analysis completed the quali-quantitative description. Under these operative conditions, the highest lipid content (up to 60.9% wt/wt) was measured in R. toruloides, while L. starkeyi showed the fastest glycerol consumption rate (1.05 g L(-1) h(-1)). Being productivity the most industrially relevant feature to be pursued, under the presented optimized conditions R. toruloides showed the best lipid productivity (0.13 and 0.15 g L(-1) h(-1) on pure and crude glycerol, respectively). Here we demonstrated that the development of an efficient feeding strategy is sufficient in preventing the inhibitory effect of crude glycerol, and robust enough to ensure high lipid

  10. Gemini NIFS survey of feeding and feedback processes in nearby active galaxies - II. The sample and surface mass density profiles

    Science.gov (United States)

    Riffel, R. A.; Storchi-Bergmann, T.; Riffel, R.; Davies, R.; Bianchin, M.; Diniz, M. R.; Schönell, A. J.; Burtscher, L.; Crenshaw, M.; Fischer, T. C.; Dahmer-Hahn, L. G.; Dametto, N. Z.; Rosario, D.

    2018-02-01

    We present and characterize a sample of 20 nearby Seyfert galaxies selected for having BAT 14-195 keV luminosities LX ≥ 1041.5 erg s-1, redshift z ≤ 0.015, being accessible for observations with the Gemini Near-Infrared Field Spectrograph (NIFS) and showing extended [O III]λ5007 emission. Our goal is to study Active Galactic Nucleus (AGN) feeding and feedback processes from near-infrared integral-field spectra, which include both ionized (H II) and hot molecular (H2) emission. This sample is complemented by other nine Seyfert galaxies previously observed with NIFS. We show that the host galaxy properties (absolute magnitudes MB, MH, central stellar velocity dispersion and axial ratio) show a similar distribution to those of the 69 BAT AGN. For the 20 galaxies already observed, we present surface mass density (Σ) profiles for H II and H2 in their inner ˜500 pc, showing that H II emission presents a steeper radial gradient than H2. This can be attributed to the different excitation mechanisms: ionization by AGN radiation for H II and heating by X-rays for H2. The mean surface mass densities are in the range (0.2 ≤ ΣH II ≤ 35.9) M⊙ pc-2, and (0.2 ≤ ΣH2 ≤ 13.9)× 10-3 M⊙ pc-2, while the ratios between the H II and H2 masses range between ˜200 and 8000. The sample presented here will be used in future papers to map AGN gas excitation and kinematics, providing a census of the mass inflow and outflow rates and power as well as their relation with the AGN luminosity.

  11. Extraction process of palm kernel cake as a source of mannan for feed additive on poultry diet

    Science.gov (United States)

    Tafsin, M.; Hanafi, N. D.; Yusraini, E.

    2017-05-01

    Palm Kernel Cake (PKC) is a by-product of palm kernel oil extraction and found in large quantity in Indonesia. The inclusion of PKC on poultry diet are limited due to some nutritional problems such as anti-nutritional properties (mannan). On the other hand, mannan containing polysaccharides play in various biological functions particularly in enhancing the immune response and to control pathogen in poultry. The research objective to find out the extraction process of PKC and conducted at animal nutrition and Feed Science Laboratory, Agricultural Faculty, University of Sumatera Utara. Various extraction methode were used in this experiment, including fraction analysis used 7 number sieves, and followed by water and acetic acid extraction. The result indicated that PKC had different particle size according to sieve size and dominated by particle size 850 um. The analysis of sugar content indicated that each particle size had different characteristic on treatment by hot water extraction. The particle size 180—850 um had higher sugar content than coarse PKC (2000—3000 um). The total sugar content were recovered vary between 0.9—3,2% from PKC were extracted. Treatment grinding method followed by hot water extraction (100—120 °C, 1 h) increased total sugar content than previous treatments and reach 8% from PKC were extracted. Utilisation acetic acid decreased the total amount of total sugar from PKC were extracted. It is concluded that treatment by hot temperature (110—120 °C) for 1 h show highest yield to extract sugar from PKC.

  12. Real-time Color Codes for Assessing Learning Process

    OpenAIRE

    Dzelzkalēja, L; Kapenieks, J

    2016-01-01

    Effective assessment is an important way for improving the learning process. There are existing guidelines for assessing the learning process, but they lack holistic digital knowledge society considerations. In this paper the authors propose a method for real-time evaluation of students’ learning process and, consequently, for quality evaluation of teaching materials both in the classroom and in the distance learning environment. The main idea of the proposed Color code method (CCM) is to use...

  13. Alfalfa (Medicago sativa L.) shoot saponins: identification and bio-activity by the assessment of aphid feeding.

    Science.gov (United States)

    Mazahery-Laghab, H; Yazdi-Samadi, B; Bagheri, M; Bagheri, A R

    2011-01-01

    Biochemical components in alfalfa (Medicago sativa L.), such as saponins, can act as protecting factors against bio-stresses. Saponins are also antifeedants and show oral toxicity towards higher and lower animals. Changes in saponins, such as variation in the carbon skeleton, or hydrolysis of saponin glycosides and other conjugates, may change their biological effects. The aims of this research were to study saponin variation in different growth stages of alfalfa and to investigate the biological role of saponins in the spotted alfalfa aphid, Therioaphis maculata. Saponins from alfalfa shoots in different growth stages were extracted, chemically purified and analysed by TLC. Specific saponins such as soyasaponin1 from root and shoot and two bisdesmosides of medicagenic acid, one from shoot and another from root tissues, were identified using reference compounds allowing changes in saponin composition during plant development in different shoot tissues of alfalfa to be assessed. The response of the alfalfa aphid to feeding on alfalfa in different growth stages was studied. No significant difference in the survival of aphids, from neonate to adult, was observed, but due to the antibiotic effects of saponins, two differences were found in the onset of nymph production and cumulative nymph production. The results show that the saponin composition in alfalfa changes with plant development and this, in turn, can often negatively affect the development of specific insect pests such as the spotted alfalfa aphid, suggesting a possible biological role of alfalfa saponins.

  14. Development and efficiency assessment of process lubrication for hot forging

    Science.gov (United States)

    Kargin, S.; Artyukh, Viktor; Ignatovich, I.; Dikareva, Varvara

    2017-10-01

    The article considers innovative technologies in testing and production of process lubricants for hot bulk forging. There were developed new compositions of eco-friendly water-graphite process lubricants for hot extrusion and forging. New approaches to efficiency assessment of process lubricants are developed and described in the following article. Laboratory and field results are presented.

  15. A behavior of O/M ratio and its effect for Material Accounting in feed preparation process of MOX fabrication line

    International Nuclear Information System (INIS)

    Kuba, Meiji; Kashimura, Motoaki; Suzuki, Toru; Yamaguchi, Toshihiro; Deguchi, Morimoto; Otani, Tetsuo

    1997-01-01

    An evaluation test to investigate the behavior of the Oxygen to Metal ratio (O/M ratio) drift and its effect to material accounting in Feed preparation process was carried out in operational MOX fuel fabrication process, Plutonium Fuel Production Facility (PFPF) of Power Reactor and Nuclear Fuel Development Corporation (PNC). The test results clearly show the transition of O/M ratio along the Feed preparation process flow and it was increased gradually according to the progress of process steps. It leveled off after Feed lot blending operation and then it remained stable around 2.25. Analytical result of plutonium concentration after the correction with the changes of moisture concentration on the same sample as O/M ratio analysis has strong correlation with O/M ratio result as the theory. Therefore, it was confirmed that the plutonium concentration of the MOX should be corrected on the basis of the changes in O/M ratio and moisture concentration. Sample taking after blending operation was carried out at Cross Blending process step. An analysis of variance for plutonium concentration using two-way layout, whose factors are feed blending batch (factor A) and container (factor B), is carried out. Since no significant difference was observed in factor A nor B, the test concludes that a sample taken after blending operation can be considered as representative for the whole material blended by cross blending operation. Now the software of 'Material Accounting System' is being modified to improved one, that is, the plutonium concentration after the intermediate storage and after treatment in a process glove box is corrected with the change of O/M ratio and moisture concentration. (J.P.N.)

  16. Safety assessment of the liquid-fed ceramic melter process

    International Nuclear Information System (INIS)

    Buelt, J.L.; Partain, W.L.

    1980-08-01

    As part of its development program for the solidification of high-level nuclear waste, Pacific Northwest Laboratory assessed the safety issues for a complete liquid-fed ceramic melter (LFCM) process. The LFCM process, an adaption of commercial glass-making technology, is being developed to convert high-level liquid waste from the nuclear fuel cycle into glass. This safety assessment uncovered no unresolved or significant safety problems with the LFCM process. Although in this assessment the LFCM process was not directly compared with other solidification processes, the safety hazards of the LFCM process are comparable to those of other processes. The high processing temperatures of the glass in the LFCM pose no additional significant safety concerns, and the dispersible inventory of dried waste (calcine) is small. This safety assessment was based on the nuclear power waste flowsheet, since power waste is more radioactive than defense waste at the time of solidification, and all accident conditions for the power waste would have greater radiological consequences than those for defense waste. An exhaustive list of possible off-standard conditions and equipment failures was compiled. These accidents were then classified according to severity of consequence and type of accident. Radionuclide releases to the stack were calculated for each group of accidents using conservative assumptions regarding the retention and decontamination features of the process and facility. Two recommendations that should be considered by process designers are given in the safety assessment

  17. EARLY ENTERAL FEEDING AND DELAYED ENTERAL FEEDING- A COMPARATIVE STUDY

    Directory of Open Access Journals (Sweden)

    Alli Muthiah

    2017-03-01

    Full Text Available BACKGROUND Nutrients form the fuel for the body, which comes in the form of carbohydrates, proteins and lipids. The body is intended to burn fuels in order to perform work. Starvation with malnutrition affects the postoperative patients and patients with acute pancreatitis. There is an increased risk of nosocomial infections and a delay in the wound healing may be noted. They are more prone for respiratory tract infections. Enteral Nutrition (EN delivers nutrition to the body through gastrointestinal tract. This also includes the oral feeding. This study will review the administration, rationale and assess the pros and cons associated with the early initiation of enteral feeding. The aim of this study is to evaluate if early commencement of enteral nutrition compared to traditional management (delayed enteral feeding is associated with fewer complications and improved outcome-  In patients undergoing elective/emergency gastrointestinal surgery.  In patients with acute pancreatitis. It is also used to determine whether a period of starvation (nil by mouth after gastrointestinal surgery or in the early days of acute pancreatitis is beneficial in terms of specific outcomes. MATERIALS AND METHODS A prospective cohort interventional study was conducted using 100 patients from July 2012 to November 2012. Patients satisfying the inclusion and exclusion criteria were included in the study. Patients admitted in my unit for GIT surgeries or acute pancreatitis constituted the test group, while patients admitted in other units for similar disease processes constituted the control group. RESULTS Our study concluded that early enteral feeding resulted in reduced incidence of surgical site infections. When the decreased length of stay, shorter convalescent period and the lesser post-interventional fatigue were taken into account, early enteral feeding has a definite cost benefit.CONCLUSION Early enteral feeding was beneficial associated with fewer

  18. EFSA Panel on Genetically Modified Organisms (GMO); Scientific Opinion on application (EFSAGMO- NL-2007-39) for the placing on the market of insect resistant and herbicide tolerant genetically modified maize MON89034 x MON88017 for food and feed uses, import and processing under Regulation (EC

    DEFF Research Database (Denmark)

    Sørensen, Ilona Kryspin

    This opinion reports on an evaluation of a risk assessment for placing on the market the genetically modified herbicide tolerant and insect resistant maize MON89034 x MON88017 for food and feed uses, import and processing. Conventional breeding methods were used in the production of maize MON89034...

  19. SOFTWARE PROCESS ASSESSMENT AND IMPROVEMENT USING MULTICRITERIA DECISION AIDING - CONSTRUCTIVIST

    Directory of Open Access Journals (Sweden)

    Leonardo Ensslin

    2012-12-01

    Full Text Available Software process improvement and software process assessment have received special attention since the 1980s. Some models have been created, but these models rest on a normative approach, where the decision-maker’s participation in a software organization is limited to understanding which process is more relevant to each organization. The proposal of this work is to present the MCDA-C as a constructivist methodology for software process improvement and assessment. The methodology makes it possible to visualize the criteria that must be taken into account according to the decision-makers’ values in the process improvement actions, making it possible to rank actions in the light of specific organizational needs. This process helped the manager of the company studied to focus on and prioritize process improvement actions. This paper offers an empirical understanding of the application of performance evaluation to software process improvement and identifies complementary tools to the normative models presented today.

  20. EARLY READING ASSESSMENT INSTRUMENTS: ABILITIES AND PROCESSES INVOLVED

    Directory of Open Access Journals (Sweden)

    Ana Cláudia de Souza

    2017-04-01

    Full Text Available This study investigates the following early reading assessment instruments: “Bateria de Recepção e Produção da Linguagem Verbal” (SCLIAR-CABRAL, 2003a and “Teste de Competência de Leitura de Palavras e Pseudopalavras” (SEABRA; CAPOVILLA, 2010. The main research goal is to analyze in each one of these reading assessment instruments some of the multiple cognitive processes and basic low-level abilities involved in reading. In this sense, decoding, word recognition, lexical access, syntactic and textual processing, and comprehension are the cognitive processes taken into account. With regard to the basic reading abilities, accuracy and fluency (rhythm, prosody and speed are considered. The results indicate that each one of the analyzed reading assessment instruments assesses different aspects of the reading processes and abilities, mainly through off-line measures. ScliarCabral’s assessment battery allows the researcher or the teacher to evaluate the following processes: perception of the grapheme opposition in minimal pairs of words and in sentences, difficulties in sentence processing, skills in decoding the graphemic-phonemic relationship, and textual comprehension. In its turn, the reading assessment instrument proposed by Seabra e Capovilla allows one to evaluate student’s reading development level, by classifying the kind of processing as logographic, alphabetic or orthographic.

  1. Selecting the sharpest tools to explore the food-feed-fuel debate: Sustainability assessment of family farmers producing food, feed and fuel in Brazil

    NARCIS (Netherlands)

    Florin, M.J.; Ittersum, van M.K.; Ven, van de G.W.J.

    2012-01-01

    Continuing interest in sustainable biofuel production is linked with sustainable farming and begs for insights from farming systems research on sustainability assessment and the role of family farms. The aims of this work were two-fold. First, to present a tools and methods selection framework

  2. Effects of dietary antioxidant supplementation in cow’s feed, milk processing and storage on lutein content and sensory quality

    Science.gov (United States)

    In this work, we studied the lutein content in milk as affected by lutein supplementation in the absence and presence of common antioxidants, vitamin E (Vit E), tea polyphenols (TP) and ethoxyquin (EQ) in cow’s feed, and by subsequent pasteurization (HTST and UHT) and storage. Results showed that l...

  3. 78 FR 34565 - Irradiation in the Production, Processing, and Handling of Animal Feed and Pet Food; Electron...

    Science.gov (United States)

    2013-06-10

    ... style for the strength units describing radiation sources. This correction is being made to improve the...). That document used incorrect style for the strength units describing radiation sources. This correction... HANDLING OF ANIMAL FEED AND PET FOOD 0 1. The authority citation for 21 CFR part 579 continues to read as...

  4. Assessment of Feeding Acceptance and Injury of Kerman Pistachios, Pistacia vera, by Brown Marmorated Stink Bug (Hemiptera: Pentatomidae)

    Science.gov (United States)

    Kamiyama, Matthew T; Hernandez, Gabriel; Nay, Justin; Hoddle, Mark S

    2017-01-01

    Abstract In the United States, California (CA) is the primary commercial producer of pistachio nuts, Pistacia vera L. (Anacardiaceae). The brown marmorated stink bug (BMSB), Halyomorpha halys (Stål) (Hemiptera: Pentatomidae), an invasive and polyphagous insect pest from Asia, has established in urban areas in several pistachio-growing counties in CA. Breeding BMSB populations have not been detected in commercial pistachio acreage. However, the detection of BMSB in Kern and Fresno counties, major Kerman pistachio producing areas in CA, underscored key knowledge gaps on BMSB ecology in CA and motivated investigations on the susceptibility of pistachio nuts to BMSB feeding. Laboratory feeding trials conducted in quarantine under permit indicated that adult BMSB stylets can penetrate developing pistachio shells and associated feeding was correlated with kernel necrosis for nuts collected mid to late season (June to August 2016). Feeding damage estimates indicated that higher levels of kernel injury were associated with female BMSB when compared to feeding by male BMSB. These results suggest that there is probable risk of feeding damage to field grown pistachios from BMSB. The implications of this study for BMSB pest management in the CA pistachio system and future research directions are discussed. PMID:29117381

  5. Assessment of Feeding Acceptance and Injury of Kerman Pistachios, Pistacia vera, by Brown Marmorated Stink Bug (Hemiptera: Pentatomidae).

    Science.gov (United States)

    Lara, Jesús R; Kamiyama, Matthew T; Hernandez, Gabriel; Nay, Justin; Hoddle, Mark S; Gao, Yulin

    2017-09-01

    In the United States, California (CA) is the primary commercial producer of pistachio nuts, Pistacia vera L. (Anacardiaceae). The brown marmorated stink bug (BMSB), Halyomorpha halys (Stål) (Hemiptera: Pentatomidae), an invasive and polyphagous insect pest from Asia, has established in urban areas in several pistachio-growing counties in CA. Breeding BMSB populations have not been detected in commercial pistachio acreage. However, the detection of BMSB in Kern and Fresno counties, major Kerman pistachio producing areas in CA, underscored key knowledge gaps on BMSB ecology in CA and motivated investigations on the susceptibility of pistachio nuts to BMSB feeding. Laboratory feeding trials conducted in quarantine under permit indicated that adult BMSB stylets can penetrate developing pistachio shells and associated feeding was correlated with kernel necrosis for nuts collected mid to late season (June to August 2016). Feeding damage estimates indicated that higher levels of kernel injury were associated with female BMSB when compared to feeding by male BMSB. These results suggest that there is probable risk of feeding damage to field grown pistachios from BMSB. The implications of this study for BMSB pest management in the CA pistachio system and future research directions are discussed. © The Authors 2017. Published by Oxford University Press on behalf of Entomological Society of America.

  6. ASSESSING FEED-IN-TARIFF POLICY APPROACHES FOR AN ACTIVE PROMOTION OF RENEWABLE POWER. COMPARATIVE ANALYSIS FOR WIND AND PV TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    IRINA NASALCIUC

    2016-10-01

    Full Text Available The consequence of business-as-usual frameworks (BAU has occasioned the market failures of modern economies inclusively of energy markets which shifted from BAU models to low carbon economies. Periodic paradigm shifts operating on energy markets drive impressive market transitions aiming to perform higher innovative approaches over the composite energy generation portfolios thus providing advanced managerial mechanisms for renewable energy sources-electricity (RES-E strategic deployment inclusively. In this context it appeared imperious to develop smart policies and patterns of promoting renewables beyond and stimulate a fast transition to smart grids. The current paper aims to better address the policy risks and to extend the relevance of policy learning process involved in the course of boosting up a whole industry system. The study reveals an updated overlook on the feed-in-tariff policies operating on green markets, identifies their regulatory risks and offers a new sight over the interconnection Investment- Regulatory Policy- Economic efficiency in targeting new investments of RES-E, focusing on a case study assessment.

  7. Ecological Risk Assessment Process under the Endangered Species Act

    Science.gov (United States)

    This document provides an overview of the Environmental Protection Agency’s (EPA) ecological risk assessment process for the evaluation of potential risk to endangered and threatened (listed) species from exposure to pesticides.

  8. Support Process Development for Assessing Green Infrastructure in Omaha, NE

    Science.gov (United States)

    Evaluates Omaha’s current process for assessing green infrastructure projects and recommends improvements for comparing green and gray infrastructure. Compares Omaha’s design criteria to other cities. Reviews other US programs with rights-of-way criteria.

  9. The role of female search behaviour in determining host plant range in plant feeding insects: a test of the information processing hypothesis

    OpenAIRE

    Janz, N.; Nylin, S.

    1997-01-01

    Recent theoretical studies have suggested that host range in herbivorous insects may be more restricted by constraints on information processing on the ovipositing females than by trade-offs in larval feeding efficiency. We have investigated if females from polyphagous species have to pay for their ability to localize and evaluate plants from different species with a lower ability to discriminate between conspecific host plants with differences in quality. Females of the monophagous butterfli...

  10. Radiation technology and feed production

    International Nuclear Information System (INIS)

    Ershov, B.G.

    1986-01-01

    The use of radiation technology to prepare feeds and feed additions for cattle of non-feed vegetable blends is considered.Physicochemical foundations of radiation-chemical processes, possibilities of the use of various radiation devices are given. Data on practical realization of the technology are presented and prospects of its introduction to solve the tasks put forward by the USSR program on feed production are analyzed

  11. Assessing Commercial and Alternative Poultry Processing Methods using Microbiome Analyses

    Science.gov (United States)

    Assessing poultry processing methods/strategies has historically used culture-based methods to assess bacterial changes or reductions, both in terms of general microbial communities (e.g. total aerobic bacteria) or zoonotic pathogens of interest (e.g. Salmonella, Campylobacter). The advent of next ...

  12. DETERMINANTS OF RISK ASSESSMENT PROCESS IN CRITICAL ENERGY INFRASTRUCTURE

    Directory of Open Access Journals (Sweden)

    Przemysław Borkowski

    2016-06-01

    Full Text Available Article deals with the problem of risk assessment in critical energy infrastructure. Firstly the critical infrastructure in energy sector is discussed than risk identification methodology for application to critical infrastructure is proposed. Specific conditions resulting from features of critical infrastructure are addressed in the context of risk assessment procedure. The limits of such a procedure are outlined and critical factors influencing different stages of risk assessment process are researched in view of specificity of the sector.

  13. Unfolding the assessment process in a whole class mathematics setting

    Directory of Open Access Journals (Sweden)

    Radišić Jelena

    2014-01-01

    Full Text Available Assessment activities in the class are an important aspect of classroom practice, while there is much debate with respect to the formative vs. summative assessment routines and the outcomes that each of them provides for students' learning. As classroom assessment does not occur in seclusion of other aspects of classroom life, the process is seen as rather complex. In this study we wished to explore how assessment serves the function of supporting students' learning and whether this evidence is used to adapt teacher's practices in meeting different learning needs in the mathematics classroom. The authors observed assessment practices of an experienced math teacher in a grammar school in Belgrade. Teacher's assessment practices were observed during a three week period. The analysis has shown the teacher to hold a somewhat complex perception of assessment, yet the perception is largely detached from teaching, which is in line with the previously reported results. However, the elements of formative assessment do emerge, thus contributing to the assessment being in service of learning. In spite of this, a narrow set of practices are visible when observing how the teacher keeps track of students' progress. A mismatch is visible between students' and teacher's perceptions of the assessment as a whole and some of the practices exercised in the process. The teacher struggled to verbalize some aspects of own assessment practices, especially those related to more formative aspects.

  14. Transition from tube feeding to oral feeding: experience in a tertiary care paediatric cardiology unit.

    Science.gov (United States)

    Shine, Anne Marie; Finn, Daragh Gerard; Allen, Noeleen; McMahon, Colin J

    2018-05-02

    Home enteral tube feeding (HETF) is imperative for many infants and children with congenital heart disease (CHD). Tube weaning (TW) facilitates the progression from tube feeding to oral diet. There is limited literature on TW practices, protocols and success for children with CHD that have been tube fed. The objective of this study is to assess the process of weaning HETF in a tertiary referral centre for paediatric CHD. Specifically, we aimed to assess the duration of HETF, duration of TW and the interventions involved. We retrospectively reviewed the medical and dietetic records of all infants and children that were successfully weaned off HETF over a 12-month period from January 2015 to December 2015. There were 30 children included in the study, 9 boys and 21 girls. The diagnoses included 15 septal defects, 8 univentricular diagnosis and other diagnoses in 7 children. The median age at initiation of enteral tube feeding was 45 days (range 2-169). The median duration to wean from enteral tube feeding was 52 days (range 2-359). Number of dietetic consults required for successful TW varied among patients, median 5 (range 2-23). The number of days required for successful TW was associated with age and duration on HETF. Dietetic interventions included discontinuation of nutrient dense feeds, altering feed schedule and reduction of feed volume. Weaning HETF is possible in the outpatient setting. Early and frequent dietetic intervention is recommended to ensure prompt discontinuation of HETF when appropriate.

  15. Assessing the process and content of strategy in different organizations

    NARCIS (Netherlands)

    Romme, A.G.L.; Kunst, P.; Schreuder, H.; Spangenberg, J.

    1990-01-01

    This paper deals with a quantitative assessment of strategy content and strategy process characteristics. The framework used is based on the concept of strategic logics. The empirical study involves six organizations in The Netherlands. Both the content and the process dimension of strategy-making

  16. A Survey of occurrence of toxogenic fungi and mycotoxins in pig feed samples-Use in evaluation of risk assessment

    Directory of Open Access Journals (Sweden)

    Dragan Milicevic

    Full Text Available In order to assess of risk assessment, the aim of this paper was to provide good and detailed insight into the level of contamination of complete feedmixes intended for fattening swine from mycotoxin-producing fungi and mycotoxins (n=18. Isolation and quantitative enumeration of fungal propagules were done on solid media using the standard microbiological procedure. These plates were incubated the number of colonies was determined and thent on the basis of characteristic colonies and microscopic analysis was performed to identify genera and species of moulds. Isolates identified as Aspergillus and Penicillium species were subjected to molecular characterization of the presence of genes responsible for the synthesis of OTA (polyketide synthase gene-PKS. Total fungal counts (CFU/g ranged from 0,5x105 do 4x106. From a total samples analysed, seven samples had fungal counts higher than the limit established by Serbian regulations (3x105. During a mycological analysis of complete feedmixes intended for fattening swine, a total of six genera and 14 species of moulds were identified of which the most frequent one was of the genus Penicillium (94,4% while the moulds from Fusarium genere isolated in 55,5% and Paecilomyces in 44,4% of the samples from investigated localities. Other fungi from the genera Aspergillus (22%, Mycor (11,1% and Alternaria (5,5% were represented in a less amount. Polymerase chain reaction (PCR is a set of 18 isolates of the DNA belonging to families Penicillium and Aspergillus. The sequences of PCR reaction products in three samples were compared with nucleotide sequences of genes for poliketid synthase (PKS from Penicillium species and found that the samples possess PKS sequence. The traditional methods for identification of ochratoxin-producing fungi are time-consuming and labor-intensive. Rapid and specific detection of ochratoxinproducing fungi is important for ensuring microbiological quality and safety of feed and food

  17. Interim process report for the safety assessment SR-Can

    International Nuclear Information System (INIS)

    Sellin, Patrick

    2004-08-01

    This report is a documentation of buffer processes identified as relevant to the long-term safety of a KBS-3 repository. The report is part of the interim reporting of the safety assessment SR-Can, see further the Interim main report. The final SR-Can reporting will support SKB's application to build an Encapsulation plant for spent nuclear fuel and is to be produced in 2006. The purpose of this report is to document the scientific knowledge of the processes to a level required for an adequate treatment in the safety assessment. The documentation is thus from a scientific point of not exhaustive since such a treatment is neither necessary for the purposes of the safety assessment nor possible within the scope of an assessment. The purpose is further to determine the handling of each process in the safety assessment and to demonstrate how uncertainties are taken care of, given the suggested handling. The process documentation in the SR 97 version of the Process report is a starting point for this SR-Can interim version. As further described in the Interim main report, the list of relevant processes has been reviewed and slightly extended by comparison to other databases. Furthermore, the backfill has been included as a system part of its own, rather than being described together with the buffer as in SR 97. Apart from giving an interim account of the documentation and handling of buffer processes in SR-Can, this report is meant to serve as a template for the forthcoming documentation of processes occurring in other parts of the repository system. A complete list of processes can be found in the Interim FEP report for the safety assessment SR-Can. All material presented in this document is preliminary in nature and will possibly be updated as the SR-Can project progresses

  18. Interim process report for the safety assessment SR-Can

    Energy Technology Data Exchange (ETDEWEB)

    Sellin, Patrick (ed.)

    2004-08-01

    This report is a documentation of buffer processes identified as relevant to the long-term safety of a KBS-3 repository. The report is part of the interim reporting of the safety assessment SR-Can, see further the Interim main report. The final SR-Can reporting will support SKB's application to build an Encapsulation plant for spent nuclear fuel and is to be produced in 2006. The purpose of this report is to document the scientific knowledge of the processes to a level required for an adequate treatment in the safety assessment. The documentation is thus from a scientific point of not exhaustive since such a treatment is neither necessary for the purposes of the safety assessment nor possible within the scope of an assessment. The purpose is further to determine the handling of each process in the safety assessment and to demonstrate how uncertainties are taken care of, given the suggested handling. The process documentation in the SR 97 version of the Process report is a starting point for this SR-Can interim version. As further described in the Interim main report, the list of relevant processes has been reviewed and slightly extended by comparison to other databases. Furthermore, the backfill has been included as a system part of its own, rather than being described together with the buffer as in SR 97. Apart from giving an interim account of the documentation and handling of buffer processes in SR-Can, this report is meant to serve as a template for the forthcoming documentation of processes occurring in other parts of the repository system. A complete list of processes can be found in the Interim FEP report for the safety assessment SR-Can. All material presented in this document is preliminary in nature and will possibly be updated as the SR-Can project progresses.

  19. Process for Selecting System Level Assessments for Human System Technologies

    Science.gov (United States)

    Watts, James; Park, John

    2006-01-01

    The integration of many life support systems necessary to construct a stable habitat is difficult. The correct identification of the appropriate technologies and corresponding interfaces is an exhaustive process. Once technologies are selected secondary issues such as mechanical and electrical interfaces must be addressed. The required analytical and testing work must be approached in a piecewise fashion to achieve timely results. A repeatable process has been developed to identify and prioritize system level assessments and testing needs. This Assessment Selection Process has been defined to assess cross cutting integration issues on topics at the system or component levels. Assessments are used to identify risks, encourage future actions to mitigate risks, or spur further studies.

  20. A systematic process for developing and assessing accident management plans

    International Nuclear Information System (INIS)

    Hanson, D.J.; Blackman, H.S.; Meyer, O.R.; Ward, L.W.

    1991-04-01

    This document describes a four-phase approach for developing criteria recommended for use in assessing the adequacy of nuclear power plant accident management plans. Two phases of the approach have been completed and provide a prototype process that could be used to develop an accident management plan. Based on this process, a preliminary set of assessment criteria are derived. These preliminary criteria will be refined and improved when the remaining steps of the approach are completed, that is, after the prototype process is validated through application. 9 refs., 10 figs., 7 tabs

  1. Process assessment of small scale low temperature methanol synthesis

    Energy Technology Data Exchange (ETDEWEB)

    Hendriyana [Chemical Engineering Department, Faculty of Engineering, Jenderal Achmad Yani Univerity (Indonesia); Chemical Engineering Department, Faculty of Industrial Technology, InstitutTeknologi Bandung (Indonesia); Susanto, Herri, E-mail: herri@che.itb.ac.id; Subagjo [Chemical Engineering Department, Faculty of Industrial Technology, InstitutTeknologi Bandung (Indonesia)

    2015-12-29

    Biomass is a renewable energy resource and has the potential to make a significant impact on domestic fuel supplies. Biomass can be converted to fuel like methanol via several step process. The process can be split into following main steps: biomass preparation, gasification, gas cooling and cleaning, gas shift and methanol synthesis. Untill now these configuration still has a problem like high production cost, catalyst deactivation, economy of scale and a huge energy requirements. These problems become the leading inhibition for biomass conversion to methanol, which should be resolved to move towards the economical. To address these issues, we developed various process and new configurations for methanol synthesis via methyl formate. This configuration combining two reactors: the one reactor for the carbonylation of methanol and CO to form methyl formate, and the second for the hydrogenolysis of methyl formate and H{sub 2} to form two molecule of methanol. Four plant process configurations were compared with the biomass basis is 300 ton/day. The first configuration (A) is equipped with a steam reforming process for converting methane to CO and H{sub 2} for increasing H{sub 2}/CO ratio. CO{sub 2} removal is necessary to avoid poisoning the catalyst. COSORB process used for the purpose of increasing the partial pressure of CO in the feed gas. The steam reforming process in B configuration is not used with the aim of reducing the number of process equipment, so expect lower investment costs. For C configuration, the steam reforming process and COSORB are not used with the aim of reducing the number of process equipment, so expect lower investment costs. D configuration is almost similar to the configuration A. This configuration difference is in the synthesis of methanol which was held in a single reactor. Carbonylation and hydrogenolysis reactions carried out in the same reactor one. These processes were analyzed in term of technical process, material and energy

  2. Process assessment of small scale low temperature methanol synthesis

    International Nuclear Information System (INIS)

    Hendriyana; Susanto, Herri; Subagjo

    2015-01-01

    Biomass is a renewable energy resource and has the potential to make a significant impact on domestic fuel supplies. Biomass can be converted to fuel like methanol via several step process. The process can be split into following main steps: biomass preparation, gasification, gas cooling and cleaning, gas shift and methanol synthesis. Untill now these configuration still has a problem like high production cost, catalyst deactivation, economy of scale and a huge energy requirements. These problems become the leading inhibition for biomass conversion to methanol, which should be resolved to move towards the economical. To address these issues, we developed various process and new configurations for methanol synthesis via methyl formate. This configuration combining two reactors: the one reactor for the carbonylation of methanol and CO to form methyl formate, and the second for the hydrogenolysis of methyl formate and H 2 to form two molecule of methanol. Four plant process configurations were compared with the biomass basis is 300 ton/day. The first configuration (A) is equipped with a steam reforming process for converting methane to CO and H 2 for increasing H 2 /CO ratio. CO 2 removal is necessary to avoid poisoning the catalyst. COSORB process used for the purpose of increasing the partial pressure of CO in the feed gas. The steam reforming process in B configuration is not used with the aim of reducing the number of process equipment, so expect lower investment costs. For C configuration, the steam reforming process and COSORB are not used with the aim of reducing the number of process equipment, so expect lower investment costs. D configuration is almost similar to the configuration A. This configuration difference is in the synthesis of methanol which was held in a single reactor. Carbonylation and hydrogenolysis reactions carried out in the same reactor one. These processes were analyzed in term of technical process, material and energy balance and economic

  3. The Eating Disorder Assessment for DSM-5 (EDA-5): Development and Validation of a Structured Interview for Feeding and Eating Disorders

    Science.gov (United States)

    Sysko, Robyn; Glasofer, Deborah R.; Hildebrandt, Tom; Klimek, Patrycja; Mitchell, James E.; Berg, Kelly C.; Peterson, Carol B.; Wonderlich, Stephen A.; Walsh, B. Timothy

    2016-01-01

    Objective Existing measures for DSM-IV eating disorder diagnoses have notable limitations, and there are important differences between DSM-IV and DSM-5 feeding and eating disorders. This study developed and validated a new semi-structured interview, the Eating Disorders Assessment for DSM-5 (EDA-5). Method Two studies evaluated the utility of the EDA-5. Study 1 compared the diagnostic validity of the EDA-5 to the Eating Disorder Examination (EDE) and evaluated the test-retest reliability of the new measure. Study 2 compared the diagnostic validity of an EDA-5 electronic application (“app”) to clinician interview and self-report assessments. Results In Study 1, the kappa for EDE and EDA-5 eating disorder diagnoses was 0.74 across all diagnoses (n= 64), with a range of κ=0.65 for Other Specified Feeding or Eating Disorder (OSFED)/Unspecified Feeding or Eating Disorder (USFED) to κ=0.90 for Binge Eating Disorder (BED). The EDA-5 test-retest kappa coefficient was 0.87 across diagnoses. For Study 2, clinical interview versus “app” conditions revealed a kappa of 0.83 for all eating disorder diagnoses (n=71). Across individual diagnostic categories, kappas ranged from 0.56 for OSFED/USFED to 0.94 for BN. Discussion High rates of agreement were found between diagnoses by EDA-5 and the EDE, and EDA-5 and clinical interviews. As this study supports the validity of the EDA-5 to generate DSM-5 eating disorders and the reliability of these diagnoses, the EDA-5 may be an option for the assessment of Anorexia Nervosa, Bulimia Nervosa, and BED. Additional research is needed to evaluate the utility of the EDA-5 in assessing DSM-5 feeding disorders. PMID:25639562

  4. The "Process" of Process Use: Methods for Longitudinal Assessment in a Multisite Evaluation

    Science.gov (United States)

    Shaw, Jessica; Campbell, Rebecca

    2014-01-01

    Process use refers to the ways in which stakeholders and/or evaluands change as a function of participating in evaluation activities. Although the concept of process use has been well discussed in the literature, exploration of methodological strategies for the measurement and assessment of process use has been limited. Typically, empirical…

  5. Integration of the AVLIS (atomic vapor laser isotopic separation) process into the nuclear fuel cycle. [Effect of AVLIS feed requirements on overall fuel cycle

    Energy Technology Data Exchange (ETDEWEB)

    Hargrove, R.S.; Knighton, J.B.; Eby, R.S.; Pashley, J.H.; Norman, R.E.

    1986-08-01

    AVLIS RD and D efforts are currently proceeding toward full-scale integrated enrichment demonstrations in the late 1980's and potential plant deployment in the mid 1990's. Since AVLIS requires a uranium metal feed and produces an enriched uranium metal product, some change in current uranium processing practices are necessitated. AVLIS could operate with a UF/sub 6/-in UF/sub 6/-out interface with little effect to the remainder of the fuel cycle. This path, however, does not allow electric utility customers to realize the full potential of low cost AVLIS enrichment. Several alternative processing methods have been identified and evaluated which appear to provide opportunities to make substantial cost savings in the overall fuel cycle. These alternatives involve varying levels of RD and D resources, calendar time, and technical risk to implement and provide these cost reduction opportunities. Both feed conversion contracts and fuel fabricator contracts are long-term entities. Because of these factors, it is not too early to start planning and making decisions on the most advantageous options so that AVLIS can be integrated cost effectively into the fuel cycle. This should offer economic opportunity to all parties involved including DOE, utilities, feed converters, and fuel fabricators. 10 refs., 11 figs., 2 tabs.

  6. The impact assessment of anticancer drug imatinib on the feeding behavior of rotifers with an integrated perspective: Exposure, post-exposure and re-exposure.

    Science.gov (United States)

    Yan, Zhengyu; Yan, Kun; He, Xingliang; Liu, Yanhua; Zhang, Jie; Lopez Torres, Oscar; Guo, Ruixin; Chen, Jianqiu

    2017-10-01

    The anticancer drugs are getting increasing attention as an emerging contaminant in the aquatic environments. In the present study, feeding behavior of the rotifer Brachionus calyciflorus under the impact of anticancer drug imatinib was evaluated. Traditional toxicological studies usually focus on dose-effect relationship at a given exposure time, while ignore the possible impact after the exposure. Thus, how the impact varied in the post-exposure and re-exposure was also considered in the present study. The feeding depression of the rotifers was attributed to the increased concentration of imatinib. Although the filtration and ingestion rate of the rotifers recovered to a certain extent after the exposure, the significant feeding inhibition still persisted even if the exposure was ended. In the re-exposure period, the feeding behavior was less depressed than those of the exposure period, which implied that rotifers might develop a tolerance to the same toxics. The activities of acetylcholine esterase (AchE) and the levels of reactive oxygen species (ROS) in rotifers were also detected. Imatinib inhibited the activities of AchE in the exposure and re-exposure while ROS levels increased significantly in the re-exposure period. Our present study provided an integrated assessment the potential environmental risks of imatinib at a new perspective. Copyright © 2017 Elsevier Ltd. All rights reserved.

  7. Food wastes as fish feeds for polyculture of low-trophic-level fish: bioaccumulation and health risk assessments of heavy metals in the cultured fish.

    Science.gov (United States)

    Cheng, Zhang; Lam, Cheung-Lung; Mo, Wing-Yin; Nie, Xiang-Ping; Choi, Wai-Ming; Man, Yu-Bon; Wong, Ming-Hung

    2016-04-01

    The major purpose of this study was to use different types of food wastes which serve as the major sources of protein to replace the fish meal used in fish feeds to produce quality fish. Two types of food waste-based feed pellets FW A (with cereals) and FW B (with cereals and meat products) and the commercial feed Jinfeng® were used to culture fingerlings of three low-trophic-level fish species: bighead carp, grass carp, and mud carp (in the ratio of 1:3:1) for 1 year period in the Sha Tau Kok Organic Farm in Hong Kong. Heavy metal concentrations in all of the fish species fed with food waste pellets and commercial pellets in Sha Tau Kok fish ponds were all below the local and international maximum permissible levels in food. Health risk assessments indicated that human consumption of the fish fed with food waste feed pellets was safe for the Hong Kong residents. The present results revealed that recycling of food waste for cultivating low-trophic-level fish (mainly herbivores and detritus feeders) is feasible, and at the same time will ease the disposal pressure of food waste, a common problem of densely populated cities like Hong Kong.

  8. Scientific assessments: Matching the process to the problem

    Directory of Open Access Journals (Sweden)

    Robert J. Scholes

    2017-03-01

    Full Text Available Background: The science–policy interface process – known as a ‘scientific assessment’ – has risen to prominence in the past few decades. Complex assessments are appropriate for issues which are both technically complicated, multifaceted and of high societal interest. There is increasing interest from the research community that studies biological invasions to undertake such an assessment. Objectives: Providing the relevant background and context, the article describes key principles and steps for designing, planning, resourcing and executing such a process, as well as providing evidence of high-impact assessments enhancing scientific careers. Method: Experience from international and national assessments, most recently the South African scientific assessment for the Shale Gas Development in the Central Karoo, was used to develop this guiding generic template for practitioners. Analyses of researcher publication performances were undertaken to determine the benefit of being involved in assessments. Results: The key success factors for assessments mostly relate to adherence to ‘process’ and ‘governance’ aspects, for which scientists are sometimes ill-equipped. As regards publication outputs, authors involved in assessment processes demonstrated higher H-indices than their environmental scientist peers. We have suggested causal explanations for this. Conclusion: Effectively designed and managed assessments provide the platform for the ‘co-production of knowledge’ – an iterative and collaborative process involving scientists, stakeholders and policymakers. This increases scientific impact in the society–policy domain. While scientists seem concerned that effort directed towards assessments comes at the detriment of scientific credibility and productivity, we have presented data that suggest the opposite.

  9. Effect of feed presentation on feeding patterns of dairy calves.

    Science.gov (United States)

    Miller-Cushon, E K; Bergeron, R; Leslie, K E; Mason, G J; DeVries, T J

    2013-01-01

    The objectives of this study were to determine the effect of feed presentation on meal frequency and duration, as well as diurnal feeding patterns of dairy calves, and to assess any longer-term differences in feeding patterns resulting from previous experience. Twenty Holstein bull calves were exposed from wk 1 to 8 of life to 1 of 2 feed presentation treatments: concentrate and chopped grass hay (Feed was provided ad libitum. Calves received 8L/d of milk replacer (1.2 kg of dry matter), with the amount progressively reduced after 5 wk to facilitate weaning by the end of wk 7. At the beginning of wk 9, all calves received the MIX diet and remained on trial for an additional 3 wk. Feeding behavior was recorded from video for 4d during wk 6, 8, 9, and 11. In wk 6, calves fed MIX spent more time feeding than calves fed COM (56.7 vs. 46.8 min/d). In wk 8, calves fed MIX spent more time feeding (174.0 vs. 139.1 min/d) and had a lower rate of intake (11.5 vs. 14.7 g/min) compared with calves fed COM. Meal frequency was similar between treatments (12.2 meals/d). Diurnal feeding patterns in wk 8 were also affected by feed presentation, with calves fed MIX spending less time feeding at time of feed delivery and more time feeding throughout the rest of the daylight hours than calves fed COM. Diurnal feeding patterns of hay and concentrate in wk 8 differed for calves fed COM, with more time spent consuming hay at time of feed delivery and less time spent consuming hay throughout the rest of the day. Once calves previously fed COM were transitioned to the MIX diet in wk 9, meal frequency, meal duration, and diurnal feeding patterns were similar between treatments: both treatments spent similar amounts of time feeding (173.9 min/d) and had similar peaks in feeding activity at time of feed delivery, sunrise, and sunset. Provision of hay and concentrate to young calves as a mixed ration, compared with separate components, increases time spent feeding and results in more evenly

  10. Safety assessment as basis for the decision making process

    International Nuclear Information System (INIS)

    Ilie, P.; Didita, L.; Danchiv, A.

    2005-01-01

    This paper deals with the safety assessment for a new near surface repository, particularly for the early stage of repository development using ISAM (Improvement of Safety Assessment Methodologies for Near Surface Disposal Facilities) safety assessment methodology. In this stage of the repository life cycle the main purpose of the safety assessment is to demonstrate that the plant is capable to be constructed and operated safely. The paper is based on development of the ASAM (Application of the Safety Assessment Methodologies for Near-Surface Disposal Facilities) Decision Support Subgroup of the Common Aspects Working Group. The implications of decision making for the application of the ISAM methodology on post-closure safety assessment are analysed. Some important elements of the decision-making process with impact on key components of the ISAM process are described. Following the development of Decision Support Subgroup of the ASAM Common Aspects Working Group the proposed change of ISAM methodology is analysed. This approach puts all activities in a decision context where the first iteration of the safety assessment is based on the existing state of knowledge and the initial engineering design. Confidence in the process is accomplished through the direct inclusion of all decision makers and stakeholders in the formulation of decisions, the definition of the state of knowledge, and decision making activities. The decision process is developed in context of undertaking assessments with little site-specific information, this situation is specifically for new planned repository. Limited site-specific information can result in a high degree of uncertainty, therefore it is important first of all to identify the sources of uncertainty arising from the limited nature of the site-specific information and then to apply appropriate approaches to manage the uncertainties and to determine whether the uncertainties are important to the overall safety of the disposal facility

  11. Investigation of Rheological Impacts on the Defense Waste Processing Facility's Sludge Slurry Feed as Insoluble Solids and Wash Endpoints are Adjusted

    International Nuclear Information System (INIS)

    Fellinger, T. L.; Howard, S.J.; Lee, M.C.; Galloway, R.H.

    2006-01-01

    The Savannah River Site (SRS) is currently pursuing an aggressive program to empty its High Level Waste (HLW) tanks and immobilize its radioactive waste into a durable borosilicate glass in the Defense Waste Processing Facility (DWPF). To create a batch of feed for the DWPF, several tanks of radioactive sludge slurry are combined into one of the million gallon (i.e. 3.79 E06 liters) feed tanks for DWPF. Once these sludge slurries are combined, the soluble sodium and weight percent total solids are adjusted by a 'washing' process. The 'washing' process involves diluting the soluble sodium of the sludge slurry with inhibited water (0.015 M NaOH and 0.015 M NaNO 2 ) and allowing the sludge slurry to settle into two layers. The two layers in the tank consist of a clear supernate on top and a layer of settled sludge solids on the bottom. The clear supernate layer is then decanted to another hold tank. This 'washing' process is repeated until the desired wash endpoint (i.e. sodium concentration in the supernate) and weight percent total solids are achieved. A final washed batch of feed consists of approximately 500,000 gallons (i.e. 1.89 E06 liters). DWPF has already processed three batches of feed and is currently processing a fourth. Prior to processing a batch of feed in the DWPF, it must be well characterized. Samples of the prepared feed batch are sent to the Savannah River National Laboratory (SRNL) for this characterization. As a part of the SRNL characterization for the fourth batch, rheology measurements were performed. Measurements were performed at different weight percent insoluble solids loadings to mimic potential facility processing scenarios (i.e. mixing/pumping of concentrated sludge slurry). In order to determine the influence of the soluble Na on the rheological properties of the sample, the supernate of the 'as received' sample was adjusted from 1 M soluble Na to 0.5 M soluble Na by using a lab scale version of the 'washing' process. Rheology

  12. Development of Electronic Nose and Near Infrared Spectroscopy Analysis Techniques to Monitor the Critical Time in SSF Process of Feed Protein

    Directory of Open Access Journals (Sweden)

    Hui Jiang

    2014-10-01

    Full Text Available In order to assure the consistency of the final product quality, a fast and effective process monitoring is a growing need in solid state fermentation (SSF industry. This work investigated the potential of non-invasive techniques combined with the chemometrics method, to monitor time-related changes that occur during SSF process of feed protein. Four fermentation trials conducted were monitored by an electronic nose device and a near infrared spectroscopy (NIRS spectrometer. Firstly, principal component analysis (PCA and independent component analysis (ICA were respectively applied to the feature extraction and information fusion. Then, the BP_AdaBoost algorithm was used to develop the fused model for monitoring of the critical time in SSF process of feed protein. Experimental results showed that the identified results of the fusion model are much better than those of the single technique model both in the training and validation sets, and the complexity of the fusion model was also less than that of the single technique model. The overall results demonstrate that it has a high potential in online monitoring of the critical moment in SSF process by use of integrating electronic nose and NIRS techniques, and data fusion from multi-technique could significantly improve the monitoring performance of SSF process.

  13. Use of benzimidazole agar plates to assess fall armyworm (Lepidoptera: Noctuidae) feeding on excised maize and sorghum leaves

    Science.gov (United States)

    The fall armyworm, Spodoptera frugiperda (J.E. Smith) (Lepidoptera: Noctuidae) is an economically significant pest of sorghum and maize. To screen sorghum and maize germplasm for resistance to fall armyworm feeding, field, greenhouse, or lab bioassays are often utilized individually or in combinatio...

  14. In vitro rumen feed degradability assessed with DaisyII and batch culture: effect of sample size

    Directory of Open Access Journals (Sweden)

    Stefano Schiavon

    2010-01-01

    Full Text Available In vitro degradability with DaisyII (D equipment is commonly performed with 0.5g of feed sample into each filter bag. Literature reported that a reduction of the ratio of sample size to bag surface could facilitate the release of soluble or fine particulate. A reduction of sample size to 0.25 g could improve the correlation between the measurements provided by D and the conventional batch culture (BC. This hypothesis was screened by analysing the results of 2 trials. In trial 1, 7 feeds were incubated for 48h with rumen fluid (3 runs x 4 replications both with D (0.5g/bag and BC; the regressions between the mean values provided for the various feeds in each run by the 2 methods either for NDF (NDFd and in vitro true DM (IVTDMD degradability, had R2 of 0.75 and 0.92 and RSD of 10.9 and 4.8%, respectively. In trial 2, 4 feeds were incubated (2 runs x 8 replications with D (0.25 g/bag and BC; the corresponding regressions for NDFd and IVTDMD showed R2 of 0.94 and 0.98 and RSD of 3.0 and 1.3%, respectively. A sample size of 0.25 g improved the precision of the measurements obtained with D.

  15. Effects of rumen-degradable protein:rumen-undegradable protein ratio and corn processing on production performance, nitrogen efficiency, and feeding behavior of Holstein dairy cows.

    Science.gov (United States)

    Savari, M; Khorvash, M; Amanlou, H; Ghorbani, G R; Ghasemi, E; Mirzaei, M

    2018-02-01

    This study was conducted to investigate the effects of the ratio of rumen-degradable protein (RDP) to rumen-undegradable protein (RUP) and corn processing method on production performance, nitrogen (N) efficiency, and feeding behavior of high-producing Holstein dairy cows. Twelve multiparous Holstein cows (second parity; milk yield = 48 ± 3 kg/d) were assigned to a replicated 4 × 4 Latin square design with a 2 × 2 factorial arrangement of treatments. Factor 1 was corn processing method [ground corn (GC) or steam flaked corn (SFC) with a flake density of about 390 g/L], and factor 2 was RDP:RUP ratio [low ratio (LR) = 60:40; high ratio (HR) = 65:35] based on crude protein (%). The crude protein concentrations were kept constant across the treatments (16.7% of DM). No significant interactions of main treatment effects occurred for lactation performance data. Cows fed 2 different RDP:RUP ratios exhibited similar dry matter intake (DMI), but those fed SFC showed decreased feed intake compared with those receiving GC (25.1 ± 0.48 vs. 26.2 ± 0.47 kg/d, respectively). Cows fed HR diets produced more milk than did those fed LR diets (44.4 ± 1.05 vs. 43.2 ± 1.05 kg/d, respectively). Milk fat content decreased but milk protein content increased in cows fed SFC compared with those fed GC. Feed efficiency (i.e., milk yield/DMI) was enhanced with increasing ratio of RDP:RUP (1.68 ± 0.04 vs. 1.74 ± 0.04 for LR and HR, respectively). Apparent N efficiency was higher in cows fed HR than in those fed LR (30.4 ± 0.61 vs. 29.2 ± 0.62, respectively). Compared with cows fed the GC-based diet, those receiving SFC exhibited lower values of N intake, N-NH 3 concentration, and fecal N excretion. Cows receiving SFC-based diets spent more time ruminating (min/kg of DMI) than did those fed GC. Although these results showed no interaction effects of RDP:RUP ratio and corn processing method on performance, higher RDP:RUP ratios and ground corn can be effective feeding strategies for

  16. Quantification of the main digestive processes in ruminants: the equations involved in the renewed energy and protein feed evaluation systems.

    Science.gov (United States)

    Sauvant, D; Nozière, P

    2016-05-01

    The evolution of feeding systems for ruminants towards evaluation of diets in terms of multiple responses requires the updating of the calculation of nutrient supply to the animals to make it more accurate on aggregated units (feed unit, or UF, for energy and protein digestible in the intestine, or PDI, for metabolizable protein) and to allow prediction of absorbed nutrients. The present update of the French system is based on the building and interpretation through meta-analysis of large databases on digestion and nutrition of ruminants. Equations involved in the calculation of UF and PDI have been updated, allowing: (1) prediction of the out flow rate of particles and liquid depending on the level of intake and the proportion of concentrate, and the use of this in the calculation of ruminal digestion of protein and starch from in situ data; (2) the system to take into account the effects of the main factors of digestive interactions (level of intake, proportion of concentrate, rumen protein balance) on organic matter digestibility, energy losses in methane and in urine; (3) more accurate calculation of the energy available in the rumen and the efficiency of its use for the microbial protein synthesis. In this renewed model UF and PDI values of feedstuffs vary depending on diet composition, and intake level. Consequently, standard feed table values can be considered as being only indicative. It is thus possible to predict the nutrient supply on a wider range of diets more accurately and in particular to better integrate energy×protein interactions occurring in the gut.

  17. Environmental impact assessments and geological repositories: A model process

    International Nuclear Information System (INIS)

    Webster, S.

    2000-01-01

    In a recent study carried out for the European Commission, the scope and application of environmental impact assessment (EIA) legislation and current EIA practice in European Union Member States and applicant countries of Central and Eastern Europe was investigated, specifically in relation to the geological disposal of radioactive waste. This paper reports the study's investigations into a model approach to EIA in the context of geological repositories, including the role of the assessment in the overall decision processes and public involvement. (author)

  18. Experimental workflow for developing a feed forward strategy to control biomass growth and exploit maximum specific methane productivity of Methanothermobacter marburgensis in a biological methane production process (BMPP

    Directory of Open Access Journals (Sweden)

    Alexander Krajete

    2016-08-01

    Full Text Available Recently, interests for new biofuel generations allowing conversion of gaseous substrate(s to gaseous product(s arose for power to gas and waste to value applications. An example is biological methane production process (BMPP with Methanothermobacter marburgensis. The latter, can convert carbon dioxide (CO2 and hydrogen (H2, having different origins and purities, to methane (CH4, water and biomass. However, these gas converting bioprocesses are tendentiously gas limited processes and the specific methane productivity per biomass amount (qCH4 tends to be low. Therefore, this contribution proposes a workflow for the development of a feed forward strategy to control biomass, growth (rx and qCH4 in a continuous gas limited BMPP. The proposed workflow starts with a design of experiment (DoE to optimize media composition and search for a liquid based limitation to control selectively growth. From the DoE it came out that controlling biomass growth was possible independently of the dilution and gassing rate applied while not affecting methane evolution rates (MERs. This was done by shifting the process from a natural gas limited state to a controlled liquid limited growth. The latter allowed exploiting the maximum biocatalytic activity for methane formation of Methanothermobacter marburgensis. An increase of qCH4 from 42 to 129 mmolCH4 g−1 h−1 was achieved by applying a liquid limitation compare with the reference state. Finally, a verification experiment was done to verify the feeding strategy transferability to a different process configuration. This evidenced the ratio of the fed KH2PO4 to rx (R(FKH2PO4/rx has an appropriate parameter for scaling feeds in a continuous gas limited BMPP. In the verification experiment CH4 was produced in a single bioreactor step at a methane evolution rate (MER of   132 mmolCH4*L−1*h−1 at a CH4 purity of 93 [Vol.%].

  19. The partnership between the Brazilian School Feeding Program and family farming: a way for reducing ultra-processed foods in school meals.

    Science.gov (United States)

    Teo, Carla Rosane Paz Arruda

    2018-01-01

    To evaluate the profile of food acquisition in the National School Feeding Program according to the extent and purpose of food processing in three municipalities of southern Brazil during the implementation period of Law 11.947/2009. Descriptive cross-sectional study. Data for 2008-2010 involved quantities, prices and types of suppliers for food items purchased. In total, 1529 purchases were analysed. The items were classified into the following groups: G1 (unprocessed/minimally processed), G2 (culinary ingredients), G3 (processed), G4 (ultra-processed). Quantities of purchased foods were converted into energy and average prices ($US/4184 kJ (1000 kcal)) were calculated. The proportion of each food group in total purchases was expressed as both a percentage of total energy and a percentage of total expenditure. Data analysis was carried out in Stata version 12.1. Three municipalities in southern Brazil. Relative contribution to total energy purchased was high for G1 (49·8 %; G2, 23·8 %; G3, 4·5 %; G4, 21·8 %). Among acquisitions from family farming, G1 represented 51·3 % of the total energy purchased; G2, 9·9 %; G3, 19·7 %; G4, 19·0 %. Total cost was as follows: G1, 61·6 %; G2, 3·9 %; G3, 18·5 %; G4, 16·0 %. Prices for food products from family farms were consistently higher. Average price from family farms was 1·3; from conventional suppliers, 0·9. The implementation of Law 11.947/2009 produced a positive effect on the regional profile of food purchases for the School Feeding Program. However, there is still considerable potential to promote health by strengthening relationships between family farming and school feeding.

  20. Replacing fish meal by food waste in feed pellets to culture lower trophic level fish containing acceptable levels of organochlorine pesticides: health risk assessments.

    Science.gov (United States)

    Cheng, Zhang; Mo, Wing-Yin; Man, Yu-Bon; Nie, Xiang-Ping; Li, Kai-Bing; Wong, Ming-Hung

    2014-12-01

    The present study used food waste (collected from local hotels and restaurants) feed pellets in polyculture of low-trophic level fish [bighead (Aristichtys nobilis), grass carp (Ctenopharyngodon idellus), and mud carp (Cirrhina molitorella)] aiming at producing safe and quality products for local consumption. The results indicated that grass carp (hexachlorocyclohexanes (HCHs) waste feed pellets were relatively free of organochlorine pesticides (OCPs). The experimental ponds (water and sediment) were relatively free of OCPs, lowering the possibility of biomagnification of OCPs in the food chains within the ponds. The raw concentrations of OCPs extracted from the fish were not in the bioavailable form, which would ultimately reach bloodstream and exert adverse effects on human body. Health risk assessments based on digestible concentrations are commonly regarded as a more accurate method. The results of health risk assessments based on raw and digestible concentrations showed that the fish fed with food waste feed pellets were safe for consumption from the OCP perspective. Copyright © 2014 Elsevier Ltd. All rights reserved.

  1. Pilot process waste assessment for the fireset area

    International Nuclear Information System (INIS)

    Cole, M.J.; Goethe, M.C.

    1992-08-01

    A pilot process waste assessment (WA) was conducted in the fireset area to develop methodology for conducting future process waste assessments. The study was conducted on trichloroethylene spray cleaning using the guidance for PWAs supplied by Environment, Safety, and Health (ES ampersand H). The first objective was to draw up a flow diagram (see Appendix A, worksheet 4) for the process. When this was done, a mass balance (see Appendix A, Worksheet 5) was conducted to determine the quantity of incoming material and where it was going during the process. The mass balance showed that a large quantity of trichloroethylene and all the isopropyl alcohol was being released to the atmosphere instead of being captured in the waste solvent container. Upon completion of the mass balance, waste minimization options where identified (see Appendix A, Worksheet 8) to reduce or eliminate the quantity of hazardous solvent used

  2. Bioprocesses: Modelling needs for process evaluation and sustainability assessment

    DEFF Research Database (Denmark)

    Jiménez-Gonzaléz, Concepcion; Woodley, John

    2010-01-01

    development such that they can also be used to evaluate processes against sustainability metrics, as well as economics as an integral part of assessments. Finally, property models will also be required based on compounds not currently present in existing databases. It is clear that many new opportunities......The next generation of process engineers will face a new set of challenges, with the need to devise new bioprocesses, with high selectivity for pharmaceutical manufacture, and for lower value chemicals manufacture based on renewable feedstocks. In this paper the current and predicted future roles...... of process system engineering and life cycle inventory and assessment in the design, development and improvement of sustainable bioprocesses are explored. The existing process systems engineering software tools will prove essential to assist this work. However, the existing tools will also require further...

  3. Radioactive waste disposal assessment - overview of biosphere processes and models

    International Nuclear Information System (INIS)

    Coughtrey, P.J.

    1992-09-01

    This report provides an overview of biosphere processes and models in the general context of the radiological assessment of radioactive waste disposal as a basis for HMIP's response to biosphere aspects of Nirex's submissions for disposal of radioactive wastes in a purpose-built repository at Sellafield, Cumbria. The overview takes into account published information from the UK as available from Nirex's safety and assessment research programme and HMIP's disposal assessment programme, as well as that available from studies in the UK and elsewhere. (Author)

  4. Process and Energy Optimization Assessment, Tobyhanna Army Depot, PA

    Science.gov (United States)

    2006-04-17

    assembly of electronic-communication components, different welding processes are performed at TYAD. It uses shielded arc, metal inert gas (MIG...tungsten inert gas ( TIG ), and silver braz- ing oxygen/acetylene cutting plasma arc methods to complete mission re- quirements. Major welding jobs are...ER D C/ CE R L TR -0 6 -1 1 Process and Energy Optimization Assessment Tobyhanna Army Depot, PA Mike C.J. Lin, Alexander M. Zhivov

  5. Comparative life cycle assessment of industrial multi-product processes

    OpenAIRE

    Jung, Johannes

    2014-01-01

    The demand for environmentally safe industrial processes is increasing. Therefore, environmental impacts of new processes have to be examined at an early stage. A method for analyzing environmental impacts is life cycle assessment (LCA). A major trouble of LCA are multi-functionality problems. Multi-functionality problems can be fixed using alternative methods such as system expansion, avoided burden and allocation. Each of the three methods requires choices by the LCA-practitioner. The choic...

  6. Collaborative study on the effect of grinding on the detection of bones from processed animal proteins in feed by light microscopy.

    Science.gov (United States)

    Veys, Pascal; Planchon, Viviane; Colbert, Ruairi; Cruz, Clara; Frick, Geneviève; Ioannou, Ioannis; Marchis, Daniela; Nordkvist, Erik; Paradies-Severin, Inge; Pohto, Arja; Weiss, Roland; Baeten, Vincent; Berben, Gilbert

    2017-08-01

    Bone fragments are essential structures for the detection of processed animal proteins (PAPs) in feed by light microscopy for official controls according to Annex VI of European Union Regulation EC/152/2009. The preparation of samples submitted for analysis requires a grinding step to make them suitable for microscopic slide preparation and observation. However, there are no technical guidelines set down for this step despite the fact that it can lead to an increase in bone numbers due to fragmentation. This was demonstrated by an in-house study carried out by the Irish National Reference Laboratory (NRL) for animal protein detection. The present collaborative study investigated the possible effects of three different grinding conditions on the final result for a feed adulterated with 0.05 and 0.01% (w/w) of PAP. The microscopic analysis either combined or not with an Alizarin Red staining was carried out by 10 different laboratories. The results demonstrated that although a large variation in the numbers of bone fragments was noted, five of the six different grinding/staining combinations applied at two levels of PAP adulteration did not significantly (at p = 0.05) differ from one another. The only exception occurred when grinding the feed containing 0.05% of PAP with a rotor mill equipped with a 0.5-mm sieve and combined with a staining which resulted in a greater number of bone fragments by forced fragmentation. Overall, the impact of the grinding/staining combinations on the final results was shown to be negligible when considering the regulatory limit of detection (LOD) requirement for the method and the current rules of implementation of the light microscopic method. From a total of 180 analyses carried out on the feed matrix containing 0.05% of PAP no false-negative result was observed, and at a level of 0.01% PAP only 10 false-negative results occurred.

  7. Environmental assessment of Ronozyme (R) p5000 CT phytase as an alternative to inorganic phosphate supplementation to pig feed used in intensive pig production

    DEFF Research Database (Denmark)

    Nielsen, Per H.; Wenzel, Henrik

    2007-01-01

    be used as an alternative to inorganic phosphorus supplementation to feed and the study addresses the environmental implications of substituting inorganic phosphorus with Ronozyme Phytase in intensive pig production in Denmark. Methods. Life cycle assessment is used as an analytical tool, and modelling...... pig production is justified by major advantages in terms of avoided contributions to global warming, acidification, photochemical ozone formation and particularly nutrient enrichment and by significant energy savings and particularly phosphate savings. A single trade-off in terms of agricultural land......Goal, Scope and Background. Ronozyme (R) P5000 CT is an industrially produced enzyme product (phytase) which is able to degrade naturally occurring phytate in animal feed and release the phytate's content of phosphorus for pig's growth. Ronozyme P5000 CT (hereafter called Ronozyme Phytase) can...

  8. Developing an Engineering Design Process Assessment using Mixed Methods.

    Science.gov (United States)

    Wind, Stefanie A; Alemdar, Meltem; Lingle, Jeremy A; Gale, Jessica D; Moore, Roxanne A

    Recent reforms in science education worldwide include an emphasis on engineering design as a key component of student proficiency in the Science, Technology, Engineering, and Mathematics disciplines. However, relatively little attention has been directed to the development of psychometrically sound assessments for engineering. This study demonstrates the use of mixed methods to guide the development and revision of K-12 Engineering Design Process (EDP) assessment items. Using results from a middle-school EDP assessment, this study illustrates the combination of quantitative and qualitative techniques to inform item development and revisions. Overall conclusions suggest that the combination of quantitative and qualitative evidence provides an in-depth picture of item quality that can be used to inform the revision and development of EDP assessment items. Researchers and practitioners can use the methods illustrated here to gather validity evidence to support the interpretation and use of new and existing assessments.

  9. Effect of feeding soybean meal and differently processed peas on intestinal morphology and functional glucose transport in the small intestine of broilers.

    Science.gov (United States)

    Röhe, I; Boroojeni, F Goodarzi; Zentek, J

    2017-09-01

    Peas are locally grown legumes being rich in protein and starch. However, the broad usage of peas as a feed component in poultry nutrition is limited to anti-nutritional factors, which might impair gut morphology and function. This study investigated the effect of feeding raw or differently processed peas compared with feeding a soybean meal-based control diet (C) on intestinal morphology and nutrient transport in broilers. A total of 360 day-old broiler chicks were fed with one of the following diets: The C diet, and 3 diets containing raw peas (RP), fermented peas (FP) and enzymatically pre-digested peas (EP), each supplying 30% of dietary crude protein. After 35 d, jejunal samples of broilers were taken for analyzing histomorphological parameters, active glucose transport in Ussing chambers and the expression of genes related to glucose absorption, intestinal permeability and cell maturation. Villus length (P = 0.017) and crypt depth (P = 0.009) of EP-fed broilers were shorter compared to birds received C. The villus surface area was larger in broilers fed C compared to those fed with the pea-containing feed (P = 0.005). Glucose transport was higher for broilers fed C in comparison to birds fed with the EP diet (P = 0.044). The sodium-dependent glucose co-transporter 1 (SGLT-1) expression was down-regulated in RP (P = 0.028) and FP (P = 0.015) fed broilers. Correlation analyses show that jejunal villus length negatively correlates with the previously published number of jejunal intraepithelial T cells (P = 0.014) and that jejunal glucose transport was negatively correlated with the occurrence of jejunal intraepithelial leukocytes (P = 0.041). To conclude, the feeding of raw and processed pea containing diets compared to a soybean based diet reduced the jejunal mucosal surface area of broilers, which on average was accompanied by lower glucose transport capacities. These morphological and functional alterations were associated with observed mucosal immune

  10. Assessment of the Knowledge Acquisition Process in Lithuanian Insurance Sector

    Directory of Open Access Journals (Sweden)

    Jurgita Raudeliūnienė

    2014-06-01

    Full Text Available Under the development of favourable globalization conditions, the demand for and importance of knowledge in the insurance sector are rapidly growing, which is characterized by the variety of insurance services and offered products as well as by a permanent change in efforts to efficiently meet the needs of society. Therefore, knowledge is becoming a unique factor that leads to the increased exclusivity of the organization in this particular sector when the recently acquired knowledge helps the employees of the company with efficiently performing work activities and creating for consumer advantages that can be hardly imitated by other insurance organizations. However, the process of knowledge acquisition will be worthless without efficient instruments for assessing the procedures leading to obtaining the necessary knowledge on demand and time. Every insurance organization in Lithuania tries to acquire the necessary knowledge on time in the most convenient way; however, researchers and business representatives feel a lack of tools for assessing and improving the knowledge acquisition process. According to scientific literature, a lack of complexity evaluating the knowledge acquisition process creates a precondition for developing instruments for the assessment of this process. The object of research is the evaluation of the knowledge acquisition process in the organizations of Lithuanian insurance sector. The goal of the article is to offer an integrated instrument of the knowledge acquisition process for the organization working in Lithuanian insurance sector. To achieve this goal, the following tasks have been implemented: the analysis of the theoretical aspects of the factors and methods of the knowledge acquisition process; the establishment of the factors specific to organizations in Lithuanian insurance sector for the purposes of assessing the knowledge acquisition process; the identification of the problematic areas of the knowledge

  11. Assessment of Process Capability: the case of Soft Drinks Processing Unit

    Science.gov (United States)

    Sri Yogi, Kottala

    2018-03-01

    The process capability studies have significant impact in investigating process variation which is important in achieving product quality characteristics. Its indices are to measure the inherent variability of a process and thus to improve the process performance radically. The main objective of this paper is to understand capability of the process being produced within specification of the soft drinks processing unit, a premier brands being marketed in India. A few selected critical parameters in soft drinks processing: concentration of gas volume, concentration of brix, torque of crock has been considered for this study. Assessed some relevant statistical parameters: short term capability, long term capability as a process capability indices perspective. For assessment we have used real time data of soft drinks bottling company which is located in state of Chhattisgarh, India. As our research output suggested reasons for variations in the process which is validated using ANOVA and also predicted Taguchi cost function, assessed also predicted waste monetarily this shall be used by organization for improving process parameters. This research work has substantially benefitted the organization in understanding the various variations of selected critical parameters for achieving zero rejection.

  12. Empirical evaluation of the Process Overview Measure for assessing situation awareness in process plants.

    Science.gov (United States)

    Lau, Nathan; Jamieson, Greg A; Skraaning, Gyrd

    2016-03-01

    The Process Overview Measure is a query-based measure developed to assess operator situation awareness (SA) from monitoring process plants. A companion paper describes how the measure has been developed according to process plant properties and operator cognitive work. The Process Overview Measure demonstrated practicality, sensitivity, validity and reliability in two full-scope simulator experiments investigating dramatically different operational concepts. Practicality was assessed based on qualitative feedback of participants and researchers. The Process Overview Measure demonstrated sensitivity and validity by revealing significant effects of experimental manipulations that corroborated with other empirical results. The measure also demonstrated adequate inter-rater reliability and practicality for measuring SA in full-scope simulator settings based on data collected on process experts. Thus, full-scope simulator studies can employ the Process Overview Measure to reveal the impact of new control room technology and operational concepts on monitoring process plants. Practitioner Summary: The Process Overview Measure is a query-based measure that demonstrated practicality, sensitivity, validity and reliability for assessing operator situation awareness (SA) from monitoring process plants in representative settings.

  13. Assessing healthcare process maturity: challenges of using a business process maturity model

    NARCIS (Netherlands)

    Tarhan, A.; Turetken, O.; van den Biggelaar, F.J.H.M.

    2015-01-01

    Doi: 10.4108/icst.pervasivehealth.2015.259105 The quality of healthcare services is influenced by the maturity of healthcare processes used to develop it. A maturity model is an instrument to assess and continually improve organizational processes. In the last decade, a number of maturity models

  14. Advanced Manufacturing Processes Laboratory Building 878 hazards assessment document

    International Nuclear Information System (INIS)

    Wood, C.; Thornton, W.; Swihart, A.; Gilman, T.

    1994-07-01

    The introduction of the hazards assessment process is to document the impact of the release of hazards at the Advanced Manufacturing Processes Laboratory (AMPL) that are significant enough to warrant consideration in Sandia National Laboratories' operational emergency management program. This hazards assessment is prepared in accordance with the Department of Energy Order 5500.3A requirement that facility-specific hazards assessments be prepared, maintained, and used for emergency planning purposes. This hazards assessment provides an analysis of the potential airborne release of chemicals associated with the operations and processes at the AMPL. This research and development laboratory develops advanced manufacturing technologies, practices, and unique equipment and provides the fabrication of prototype hardware to meet the needs of Sandia National Laboratories, Albuquerque, New Mexico (SNL/NM). The focus of the hazards assessment is the airborne release of materials because this requires the most rapid, coordinated emergency response on the part of the AMPL, SNL/NM, collocated facilities, and surrounding jurisdiction to protect workers, the public, and the environment

  15. Advanced Manufacturing Processes Laboratory Building 878 hazards assessment document

    Energy Technology Data Exchange (ETDEWEB)

    Wood, C.; Thornton, W.; Swihart, A.; Gilman, T.

    1994-07-01

    The introduction of the hazards assessment process is to document the impact of the release of hazards at the Advanced Manufacturing Processes Laboratory (AMPL) that are significant enough to warrant consideration in Sandia National Laboratories` operational emergency management program. This hazards assessment is prepared in accordance with the Department of Energy Order 5500.3A requirement that facility-specific hazards assessments be prepared, maintained, and used for emergency planning purposes. This hazards assessment provides an analysis of the potential airborne release of chemicals associated with the operations and processes at the AMPL. This research and development laboratory develops advanced manufacturing technologies, practices, and unique equipment and provides the fabrication of prototype hardware to meet the needs of Sandia National Laboratories, Albuquerque, New Mexico (SNL/NM). The focus of the hazards assessment is the airborne release of materials because this requires the most rapid, coordinated emergency response on the part of the AMPL, SNL/NM, collocated facilities, and surrounding jurisdiction to protect workers, the public, and the environment.

  16. Sequential optimization and reliability assessment method for metal forming processes

    International Nuclear Information System (INIS)

    Sahai, Atul; Schramm, Uwe; Buranathiti, Thaweepat; Chen Wei; Cao Jian; Xia, Cedric Z.

    2004-01-01

    Uncertainty is inevitable in any design process. The uncertainty could be due to the variations in geometry of the part, material properties or due to the lack of knowledge about the phenomena being modeled itself. Deterministic design optimization does not take uncertainty into account and worst case scenario assumptions lead to vastly over conservative design. Probabilistic design, such as reliability-based design and robust design, offers tools for making robust and reliable decisions under the presence of uncertainty in the design process. Probabilistic design optimization often involves double-loop procedure for optimization and iterative probabilistic assessment. This results in high computational demand. The high computational demand can be reduced by replacing computationally intensive simulation models with less costly surrogate models and by employing Sequential Optimization and reliability assessment (SORA) method. The SORA method uses a single-loop strategy with a series of cycles of deterministic optimization and reliability assessment. The deterministic optimization and reliability assessment is decoupled in each cycle. This leads to quick improvement of design from one cycle to other and increase in computational efficiency. This paper demonstrates the effectiveness of Sequential Optimization and Reliability Assessment (SORA) method when applied to designing a sheet metal flanging process. Surrogate models are used as less costly approximations to the computationally expensive Finite Element simulations

  17. A Process Model for Assessing Adolescent Risk for Suicide.

    Science.gov (United States)

    Stoelb, Matt; Chiriboga, Jennifer

    1998-01-01

    This comprehensive assessment process model includes primary, secondary, and situational risk factors and their combined implications and significance in determining an adolescent's level or risk for suicide. Empirical data and clinical intuition are integrated to form a working client model that guides the professional in continuously reassessing…

  18. Assessing the Army’s Software Patch Management Process

    Science.gov (United States)

    2016-03-04

    software maker or to antivirus vendors (Zetter, 2014). Fixing such a vulnerability within the zero-day period requires teamwork across multiple...Assessing the Army’s Software Patch Management Process Benjamin Alan Pryor March 4, 2016 PUBLISHED...19 Commercial-Off-the-Shelf Software

  19. Are bioassays useful tools to assess redox processes and biodegradation?

    DEFF Research Database (Denmark)

    Albrechtsen, Hans-Jørgen; Pedersen, Philip Grinder; Ludvigsen, L.

    2002-01-01

    sensitive hydrochemical or geochemical parameters, levels of hydrogen, and redox potential. However, all these approaches have to be evaluated against TEAP-bioassays as the most direct measure. We assessed successfully ongoing microbial-mediated redox processes by TEAP-bioassays in degradation studies...... of aromatic and chlorinated aliphatic compounds in landfill leachate plumes, and of pesticides in aquifers with various redox conditions....

  20. Process-oriented Approach to Designing Immersion Assessments

    Science.gov (United States)

    2014-02-01

    Command (USSOCOM) Command Language Program Manager (CLPM) Advanced Competencies Course in a presentation titled, The Language Needs Assessment Process and...Techniques can be very similar • Physical v. psychological fidelity • Johns (2006) Discrete Context—task, social and physical • 4Ps : Purpose

  1. Improving Process Writing with the Use Authentic Assessment

    Science.gov (United States)

    bin Abdul Aziz, Muhammad Noor; Yusoff, Nurahimah Mohd

    2016-01-01

    The paper discusses on how process writing is improved with the use of authentic assessment in an English Language classroom. Eleven primary school children from Year 4 in a rural school in Sabah are the participants of the study. Data were collected by observing them during the English Language lessons and at the end of the series of…

  2. Department of Energy's process waste assessment graded approach methodology

    International Nuclear Information System (INIS)

    Pemberton, S.E.

    1994-03-01

    As the initial phase of the formal waste minimization program, the Department of Energy requires assessments of all its waste-generating operations. These assessments, called process waste assessments (PWAs), are a tool which helps achieve the pollution prevention goals. The DOE complex is comprised of numerous sites located in many different states. The facilities as a whole represent a tremendous diversity of technologies, processes, and activities. Due to this diversity, there are also a wide variety and number of waste streams generated. Many of these waste streams are small, intermittent, and not of consistent composition. The PWA graded approach methodology addresses these complexities and recognizes that processes vary in the quantity of pollution they generate, as well as in the perceived risk and associated hazards. Therefore, the graded approach was developed to provide a cost-effective and flexible methodology which allows individual sites to prioritize their local concerns and align their efforts with the resources allocated. This presentation will describe a project sponsored by the DOE Office of Environmental Restoration and Waste Management, Waste Minimization Division, which developed a graded approach methodology for use throughout the DOE. This methodology was initiated in FY93 through a combined effort of the following DOE/Defense Program sites: Kansas City Plant, Lawrence Livermore National Laboratory, Los Alamos National Laboratory, Sandia National Laboratories. This presentation will describe the process waste assessment tool, benefits achieved through the completion of PWAs, DOE's graded approach methodology, and an update on the project's current status

  3. Assessment of the Biological Treatability of Black Tea Processing ...

    African Journals Online (AJOL)

    The anaerobic degradability of tea beverage processing effluent was assessed using a stationary upflow anaerobic filter. The filter, with an active column of 1.2m height, inner diameter of 100 mm and filled with rock as the attachment medium was operated at room temperature ranging between 20-250C throughout the ...

  4. COMPARISON OF THE RISK ASSESSMENT PROCESS FOR PESTICIDES AND BIOPESTICIDES

    Science.gov (United States)

    In the risk assessment process for pesticides, a number of variables are used, including the results obtained from the studies that support registration. Some of these variables are physical and chemical properties of the organisms (crops, growing cycles) and their environments ...

  5. Operational risk assessments by supply chain professionals : process and performance

    NARCIS (Netherlands)

    Tazelaar, F.; Snijders, C.C.P.

    2013-01-01

    We consider the "process-performance paradox" in the assessment of operational risks by professionals in the field of operations and supply chain management (OSCM). The paradox states that although professionals with more expertise tend to decide in different ways, they often do not make better

  6. Assessment of Available Particle Size Data to Support an Analysis of the Waste Feed Delivery System Transfer System

    International Nuclear Information System (INIS)

    JEWETT, J.R.

    2000-01-01

    Available data pertaining to size distribution of the particulates in Hanford underground tank waste have been reviewed. Although considerable differences exist between measurement methods, it may be stated with 95% confidence that the median particle size does not exceed 275 (micro)m in at least 95% of the ten tanks selected as sources of HLW feed for Phase 1 vitrification in the RPP. This particle size is recommended as a design basis for the WFD transfer system

  7. Interaction between thermal/hydraulics, human factors and system analysis for assessing feed and bleed risk benefits

    International Nuclear Information System (INIS)

    Lanore, J.M.; Caron, J.L.

    1987-11-01

    For probabilistic analysis of accident sequences, thermal/hydraulics, human factors and systems operation problems are frequently closely interrelated. This presentation will discuss a typical example which illustrates this interrelation: total loss of feedwater flow. It will present thermal/hydraulic analysises performed, how the T/H analysises are related to human factors and systems operation, and how, based on this, the failure probability of the feed and bleed cooling mode was evaluated

  8. Real-Time Assessment and Diagnosis of Process Operating Performance

    Directory of Open Access Journals (Sweden)

    Shabnam Sedghi

    2017-04-01

    Full Text Available Over time, the performance of processes may deviate from the initial design due to process variations and uncertainties, making it necessary to develop systematic methods for online optimality assessment based on routine operating process data. Some processes have multiple operating modes caused by the set point change of the critical process variables to achieve different product specifications. On the other hand, the operating region in each operating mode can alter, due to uncertainties. In this paper, we will establish an optimality assessment framework for processes that typically have multi-mode, multi-region operations, as well as transitions between different modes. The kernel density approach for mode detection is adopted and improved for operating mode detection. For online mode detection, the model-based clustering discriminant analysis (MclustDA approach is incorporated with some a priori knowledge of the system. In addition, multi-modal behavior of steady-state modes is tackled utilizing the mixture probabilistic principal component regression (MPPCR method, and dynamic principal component regression (DPCR is used to investigate transitions between different modes. Moreover, a probabilistic causality detection method based on the sequential forward floating search (SFFS method is introduced for diagnosing poor or non-optimum behavior. Finally, the proposed method is tested on the Tennessee Eastman (TE benchmark simulation process in order to evaluate its performance.

  9. Inaccurate Assessment of Canine Body Condition Score, Bodyweight, and Pet Food Labels: A Potential Cause of Inaccurate Feeding

    Directory of Open Access Journals (Sweden)

    Philippa S. Yam

    2017-06-01

    Full Text Available The objectives were to investigate owners’ ability to assign the correct bodyweight (BW and body condition score (BCS to their dog and to interpret wet and dry pet food labels by estimating how much to feed daily. One hundred and seventy-four questionnaires were completed. Owner estimated BW was compared to actual BW, correct being defined within ±10% of actual BW. Correct interpretation of the total amount of food required was determined by the number of cans (±25% of cans required for wet food and grams (±20% of grams for dry food, based on the dog’s actual BW, the feeding guidelines on the label, and a comparison with the owner’s estimate. Eleven percent of owners overestimated BCS and 19% overestimated BW. Only 48% of owners could correctly estimate their dog’s BW. Only 23% and 43% of owners could correctly estimate how much wet and dry food to feed, respectively. Chi-square analysis demonstrated a significant positive association for owners correctly estimating their dog’s BW and interpreting the wet pet food label. Many owners are not aware of their pet’s BCS and BW and cannot accurately interpret pet food labels. Further owner education to improve these skills is needed if dogs are to be fed correctly.

  10. Confirmatory factor analysis of the Feeding Emotions Scale. A measure of parent emotions in the context of feeding.

    Science.gov (United States)

    Frankel, Leslie; Fisher, Jennifer O; Power, Thomas G; Chen, Tzu-An; Cross, Matthew B; Hughes, Sheryl O

    2015-08-01

    Assessing parent affect is important because studies examining the parent-child dyad have shown that parent affect has a profound impact on parent-child interactions and related outcomes. Although some measures that assess general affect during daily lives exist, to date there are only few tools that assess parent affect in the context of feeding. The aim of this study was to develop an instrument to measure parent affect specific to the feeding context and determine its validity and reliability. A brief instrument consisting of 20 items was developed that specifically asks how parents feel during the feeding process. This brief instrument draws on the structure of a well-validated general affect measure. A total of 296 Hispanic and Black Head Start parents of preschoolers completed the Feeding Emotions Scale along with other parent-report measures as part of a larger study designed to better understand feeding interactions during the dinner meal. Confirmatory factor analysis supported a two-factor model with independent subscales of positive affect and negative affect (Cronbach's alphas of 0.85 and 0.84, respectively). Concurrent and convergent construct validity was evaluated by correlating the subscales of the Feeding Emotions Scale with positive emotionality and negative emotionality from the Differential Emotions Scale - a measure of general adult emotions. Concurrent and convergent criterion validity was evaluated by testing mean differences in affect across parent feeding styles using ANOVA. A significant difference was found across maternal weight status for positive feeding affect. The resulting validated measure can be used to assess parent affect in studies of feeding to better understand how interactions during feeding may impact the development of child eating behaviors and possibly weight status. Copyright © 2015 Elsevier Ltd. All rights reserved.

  11. Office of Academic Assessment provides workshops on the program assessment process

    OpenAIRE

    Williams, Meghan

    2008-01-01

    The Office of Academic Assessment is once again providing a series of workshops on the program assessment process during the spring semester. The workshops will offer a wide range of resources to assist faculty and administrators as they focus on teaching and learning in their programs.

  12. Engineering Options Assessment Report. Nitrate Salt Waste Stream Processing

    Energy Technology Data Exchange (ETDEWEB)

    Anast, Kurt Roy [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-11-13

    This report examines and assesses the available systems and facilities considered for carrying out remediation activities on remediated nitrate salt (RNS) and unremediated nitrate salt (UNS) waste containers at Los Alamos National Laboratory (LANL). The assessment includes a review of the waste streams consisting of 60 RNS, 29 above-ground UNS, and 79 candidate below-ground UNS containers that may need remediation. The waste stream characteristics were examined along with the proposed treatment options identified in the Options Assessment Report . Two primary approaches were identified in the five candidate treatment options discussed in the Options Assessment Report: zeolite blending and cementation. Systems that could be used at LANL were examined for housing processing operations to remediate the RNS and UNS containers and for their viability to provide repackaging support for remaining LANL legacy waste.

  13. Engineering Options Assessment Report: Nitrate Salt Waste Stream Processing

    Energy Technology Data Exchange (ETDEWEB)

    Anast, Kurt Roy [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-11-18

    This report examines and assesses the available systems and facilities considered for carrying out remediation activities on remediated nitrate salt (RNS) and unremediated nitrate salt (UNS) waste containers at Los Alamos National Laboratory (LANL). The assessment includes a review of the waste streams consisting of 60 RNS, 29 aboveground UNS, and 79 candidate belowground UNS containers that may need remediation. The waste stream characteristics were examined along with the proposed treatment options identified in the Options Assessment Report . Two primary approaches were identified in the five candidate treatment options discussed in the Options Assessment Report: zeolite blending and cementation. Systems that could be used at LANL were examined for housing processing operations to remediate the RNS and UNS containers and for their viability to provide repackaging support for remaining LANL legacy waste.

  14. Seaweed as innovative feedstock for energy and feed – Evaluating the impacts through a Life Cycle Assessment

    DEFF Research Database (Denmark)

    Seghetta, Michele; Romeo, Daina; D'Este, Martina

    2017-01-01

    a comparative Life Cycle Assessment of five scenarios identifying the critical features affecting resource efficiency and environmental performance of the systems with the aim of providing decision support for the design of future industrial scale production processes. The results show that all scenarios......Offshore cultivation of seaweed provides an innovative feedstock for biobased products supporting blue growth in northern Europe. This paper analyzes two alternative exploitation pathways: energy and protein production. The first pathway is based on anaerobic digestion of seaweed which is converted...... into biogas, for production of electricity and heat, and digestate, used as fertilizer; the second pathway uses seaweed hydrolysate as a substrate for cultivation of heterotrophic microalgae. As a result the seaweed sugars are consumed while new proteins are produced enhancing the total output. We performed...

  15. Assessment of lightning impact frequency for process equipment

    International Nuclear Information System (INIS)

    Necci, Amos; Antonioni, Giacomo; Cozzani, Valerio; Krausmann, Elisabeth; Borghetti, Alberto; Nucci, Carlo Alberto

    2014-01-01

    Fires and explosions triggered by lightning strikes are among the most frequent Natech scenarios affecting the chemical and process industry. Although lightning hazard is well known, well accepted quantitative procedures to assess the contribution of accidents caused by lightning to industrial risk are still lacking. In the present study, a quantitative methodology for the assessment of the expected frequency of lightning capture by process equipment is presented. A specific model, based on Monte Carlo simulations, was developed to assess the capture frequency of lightning for equipment with a given geometry. The model allows the assessment of lay-out effects and the reduction of the capture probability due to the presence of other structures or equipment items. The results of the Monte Carlo simulations were also used to develop a simplified cell method allowing a straightforward assessment of the lightning impact probability in a quantitative risk assessment framework. The developed approach allows an in-depth analysis of the hazard due to lightning impact by identifying equipment items with the highest expected frequency of lightning impacts in a given lay-out. The model thus supplies useful data to approach the assessment of the quantitative contribution of lightning-triggered accidents to industrial risk. - Highlights: • A specific approach to storage tank lightning impact frequency calculation was developed. • The approach is suitable for the quantitative assessment of industrial risk due to lightning. • The models developed provide lightning capture frequency based on tank geometry. • Lay-out effects due to nearby structures are also accounted. • Capture frequencies may be as high as 10 −1 events/year for standalone unprotected tanks

  16. Variation in Health Technology Assessment and Reimbursement Processes in Europe.

    Science.gov (United States)

    Akehurst, Ronald L; Abadie, Eric; Renaudin, Noël; Sarkozy, François

    2017-01-01

    It has been suggested that differences in health technology assessment (HTA) processes among countries, particularly within Europe, have led to inequity in patient access to new medicines. To provide an up-to-date snapshot analysis of the present status of HTA and reimbursement systems in select European countries, and to investigate the implications of these processes, especially with regard to delays in market and patient access. HTA and reimbursement processes were assessed through a review of published and gray literature, and through a series of interviews with HTA experts. To quantify the impact of differences among countries, we conducted case studies of 12 products introduced since 2009, including 10 cancer drugs. In addition to the differences in HTA and reimbursement processes among countries, the influence of particular sources of information differs among HTA bodies. The variation in the time from the authorization by the European Medicines Agency to the publication of HTA decisions was considerable, both within and among countries, with a general lack of transparency as to why some assessments take longer than others. In most countries, market access for oncology products can occur outside the HTA process, with sales often preceding HTA decisions. It is challenging even for those with considerable personal experience in European HTA processes to establish what is really happening in market access for new drugs. We recommend that efforts should be directed toward improving transparency in HTA, which should, in turn, lead to more effective processes. Copyright © 2017 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

  17. Probabilistic Safety Assessment of Waste from PyroGreen Processes

    International Nuclear Information System (INIS)

    Ju, Hee Jae; Ham, In hye; Hwang, Il Soon

    2016-01-01

    The main object of PyroGreen processes is decontaminating SNFs into intermediate level waste meeting U.S. WIPP contact-handled (CH) waste characteristics to achieve long-term radiological safety of waste disposal. In this paper, radiological impact of PyroGreen waste disposal is probabilistically assessed using domestic input parameters for safety assessment of disposal. PyroGreen processes is decontamination technology using pyro-chemical process developed by Seoul National University in collaboration with KAERI, Chungnam University, Korea Hydro-Nuclear Power and Yonsei University. Advanced Korean Reference Disposal System (A-KRS) design for vitrified waste is applied to develop safety assessment model using GoldSim software. The simulation result shows that PyroGreen vitrified waste is expected to satisfy the regulatory dose limit criteria, 0.1 mSv/yr. With small probability, however, radiological impact to public can be higher than the expected value after 2E5-year. Although the result implies 100 times safety margin even in that case, further study will be needed to assess the sensitivity of other input parameters which can affect the radiological impact for long-term.

  18. Probabilistic Safety Assessment of Waste from PyroGreen Processes

    Energy Technology Data Exchange (ETDEWEB)

    Ju, Hee Jae; Ham, In hye; Hwang, Il Soon [Seoul National University, Seoul (Korea, Republic of)

    2016-05-15

    The main object of PyroGreen processes is decontaminating SNFs into intermediate level waste meeting U.S. WIPP contact-handled (CH) waste characteristics to achieve long-term radiological safety of waste disposal. In this paper, radiological impact of PyroGreen waste disposal is probabilistically assessed using domestic input parameters for safety assessment of disposal. PyroGreen processes is decontamination technology using pyro-chemical process developed by Seoul National University in collaboration with KAERI, Chungnam University, Korea Hydro-Nuclear Power and Yonsei University. Advanced Korean Reference Disposal System (A-KRS) design for vitrified waste is applied to develop safety assessment model using GoldSim software. The simulation result shows that PyroGreen vitrified waste is expected to satisfy the regulatory dose limit criteria, 0.1 mSv/yr. With small probability, however, radiological impact to public can be higher than the expected value after 2E5-year. Although the result implies 100 times safety margin even in that case, further study will be needed to assess the sensitivity of other input parameters which can affect the radiological impact for long-term.

  19. Geosphere process report for the safety assessment SR-Can

    International Nuclear Information System (INIS)

    Skagius, Kristina

    2006-09-01

    This report documents geosphere processes identified as relevant to the long-term safety of a KBS- repository, and forms an important part of the reporting of the safety assessment SR-Can. The detailed assessment methodology, including the role of the process report in the assessment, is described in the SR-Can Main report. The following excerpts describe the methodology, and clarify the role of this process report in the assessment. The repository system, broadly defined as the deposited spent nuclear fuel, the engineered barriers surrounding it, the host rock and the biosphere in the proximity of the repository, will evolve over time. Future states of the system will depend on the initial state of the system, a number of radiation related, thermal, hydraulic, mechanical, chemical and biological processes acting within the repository system over time, and external influences acting on the system. A methodology in ten steps has been developed for SR-Can described below. Identification of factors to consider (FEP processing): This step consists of identifying all the factors that need to be included in the analysis. Experience from earlier safety assessments and KBS-specific and international databases of relevant features, events and processes influencing long-term safety are utilised. Based on the results of the FEP processing, an SR-Can FEP catalogue, containing FEPs to be handled in SR-Can, has been established. The initial state of the system is described based on the design specifications of the KBS repository, a descriptive model of the repository site and a site-specific layout of the repository. The initial state of the fuel and the engineered components is that immediately after deposition, as described in the SR-Can Initial state report. The initial state of the geosphere and the biosphere is that of the natural system prior to excavation, as described in the site descriptive models. The repository layouts adapted to the sites are provided in underground

  20. Geosphere process report for the safety assessment SR-Can

    Energy Technology Data Exchange (ETDEWEB)

    Skagius, Kristina [Kemakta Konsult AB, Stockholm (SE)] (ed.)

    2006-09-15

    This report documents geosphere processes identified as relevant to the long-term safety of a KBS- repository, and forms an important part of the reporting of the safety assessment SR-Can. The detailed assessment methodology, including the role of the process report in the assessment, is described in the SR-Can Main report. The following excerpts describe the methodology, and clarify the role of this process report in the assessment. The repository system, broadly defined as the deposited spent nuclear fuel, the engineered barriers surrounding it, the host rock and the biosphere in the proximity of the repository, will evolve over time. Future states of the system will depend on the initial state of the system, a number of radiation related, thermal, hydraulic, mechanical, chemical and biological processes acting within the repository system over time, and external influences acting on the system. A methodology in ten steps has been developed for SR-Can described below. Identification of factors to consider (FEP processing): This step consists of identifying all the factors that need to be included in the analysis. Experience from earlier safety assessments and KBS-specific and international databases of relevant features, events and processes influencing long-term safety are utilised. Based on the results of the FEP processing, an SR-Can FEP catalogue, containing FEPs to be handled in SR-Can, has been established. The initial state of the system is described based on the design specifications of the KBS repository, a descriptive model of the repository site and a site-specific layout of the repository. The initial state of the fuel and the engineered components is that immediately after deposition, as described in the SR-Can Initial state report. The initial state of the geosphere and the biosphere is that of the natural system prior to excavation, as described in the site descriptive models. The repository layouts adapted to the sites are provided in underground

  1. Further assessment studies of the Advanced Cold Process Canister

    International Nuclear Information System (INIS)

    Henshaw, J.; Hoch, A.; Sharland, S.M.

    1990-08-01

    A preliminary assessment of the performance of the Advanced Cold Process Canister (ACPC) was carried out recently by Marsh. The aim of the study presented in this report is to re-examine the validity of some of the assumptions made, and re-evaluate the canister performance as appropriate. Two areas were highlighted in the preliminary study as requiring more detailed quantitative evaluation. 1) Assessment of the risk of internal stress-corrosion cracking induced by irradiation of moist air inside the canister if, under fault conditions, significant water was carried into the canister before sealing. 2) Evaluation of the corrosion behaviour subsequent to first breach of outer container. (author)

  2. Assessment of very high-temperature reactors in process applications

    International Nuclear Information System (INIS)

    Spiewak, I.; Jones, J.E. Jr.; Gambill, W.R.; Fox, E.C.

    1976-11-01

    An overview is presented of the technical and economic feasibility for the development of a very high-temperature reactor (VHTR) and associated processes. A critical evaluation of VHTR technology for process temperatures of 1400 and 2000 0 F is made. Additionally, an assessment of potential market impact is made to determine the commercial viability of the reactor system. It is concluded that VHTR process heat in the range of 1400 to 1500 0 F is attainable with near-term technology. However, process heat in excess of 1600 0 F would require considerably more materials development. The potential for the VHTR could include a major contribution to synthetic fuel, hydrogen, steel, and fertilizer production and to systems for transport and storage of high-temperature heat. A recommended development program including projected costs is presented

  3. USGCRP's Sustained Assessment Process: Progress to date and future plans

    Science.gov (United States)

    DeAngelo, B. J.; Reidmiller, D.; Lipschultz, F.; Cloyd, E. T.

    2016-12-01

    One of the four main objectives of the U.S. Global Change Research Program's (USGCRP's) Strategic Plan is to "Conduct Sustained Assessments", which seeks to build a process that synthesizes and advances the state of scientific knowledge on global change, develops future scenarios and potential impacts, and evaluates how effectively science is being and can be used to inform and support the Nation's response to climate change. To do so, USGCRP strives to establish a standing capacity to conduct national climate assessments with sectoral and regional information to evaluate climate risks and opportunities, and to inform decision-making, especially with regard to resiliency planning and adaptation measures. Building on the success of the 3rd National Climate Assessment (NCA) (2014), we discuss the range of USGCRP activities that embody the sustained assessment concept. Special reports, such as the recent Climate and Human Health Assessment and upcoming Climate Science Special Report, fill gaps in our understanding and provide crucial building blocks for next NCA report (NCA4). To facilitate the use of consistent assumptions across NCA4, new scenario products for climate, population, and land use will be made available through initiatives such as NOAA's Climate Resilience Toolkit. NCA4 will be informed by user engagement to advance the customization of knowledge. The report will strive to advance our ability to quantify various risks, monetize certain impacts, and communicate the benefits (i.e., avoided impacts) of various mitigation pathways. NCAnet (a national network of climate-interested stakeholders) continues to grow and foster collaborations across levels of governance and within civil society. Finally, USGCRP continues to actively engage with other assessment processes, at international, state, city, and tribal levels, to exchange ideas and to facilitate the potential for "linked" assessments across spatial scales.

  4. Life cycle assessment of an SOFC/GT process

    Energy Technology Data Exchange (ETDEWEB)

    Olausson, Pernilla

    1999-06-01

    For the last few years much effort has been put into the research on different kinds of fuel cells, since these are considered to be both an efficient and environment friendly way to convert energy. The fuel cell studied here is the solid oxide fuel cell (SOFC) that works at a high temperature (800-1000 C) and today achieves a stand-alone electric efficiency of approximately 50%. When integrating the SOFC in a gas turbine process (SOFC/GT process) an efficiency of 70-75% can be reached. The SOFC and the SOFC/GT process are considered to be environment friendly regarding the discharges during operation. Especially formation of nitrogen oxides (NO{sub x}) is low since the SOFC temperatures are low compared to NO{sub x} formation temperatures. To study the whole environmental impact of the SOFC/GT process a life cycle assessment (LCA) is carried out to find the `hot spots` in the process` life cycle. Since the SOFC/GT process is under development today the collected data are mainly from literature and articles based on laboratory results. When performing the LCA only the SOFC-module and the gas turbine are included. A collection of data of all processes included, extraction of minerals, processing of raw material, production of the components, operation of the SOFC/GT process and transports between all these processes. These data are then added up and weighted in impact categories to evaluate the total environmental impact of the SOFC/GT process. All these steps are performed according to the ISO 14040-series. The stand-alone most contributing phase during the life cycle of the SOFC/GT process was found to be the production of the SOFC. All processes during the production of the SOFC are carried out under laboratory circumstances, which require more energy and materials than if the processes were commercialised and optimised. For the SOFC/GT process to be competitive with other energy converting processes regarding the discharges of emissions to the air, the use of

  5. Scale-up fermentation of oil palm empty fruit bunch to produce ruminant feed by radiation processing

    International Nuclear Information System (INIS)

    Awang, M.R.; Mutaat, H.H.; Deres, R.M.; Kume, Tamikazu.

    1992-01-01

    Scale-up fermentation and irradiation conditions of empty fruit bunch (EFB) of oil palm were examined to produce a large amount of fermented products for animal feeds. The EFB substrates pasteurized by irradiation were inoculated with Coprinus cinereus. After 1 month incubation, the crude fiber contents decreased to 20 - 38% and crude protein contents increased to 9 - 13% in small scale fermentation using conical flask (6 - 20 g EFB). In the case of fermentation using polypropylene bags with 400 g EFB, crude fiber and protein contents were 32 - 34% and 11 - 14%, respectively. A larger plastic container packed with 1.5 kg EFB fiber of 10cm thickness was used for mushroom cultivation. After harvest of mushroom (yields were about 250 g per container), the quality of residual substrates improved further as reflected by its crude fiber content of only 16 - 20%, crude protein content of 6 - 8%. These results show that a large volume of products are available under the good aeration by increasing the number of plastic bags or containers. For the irradiation of a lot of fermentation substrates, the advantage of 60 Co gamma-ray and electron beam irradiator was also discussed. (author)

  6. Definition of key parameters for constructing an online reference micrographs collection of processed animal particles in feed

    Directory of Open Access Journals (Sweden)

    Belinchon Crespo, C.

    2012-01-01

    Full Text Available The European Union Reference Laboratory for the detection of animal proteins in feedingstuffs (EURL-AP has developed an online micrographs collection supporting its network activities within the European Union for the detection of prohibited animal by-products in feed. So far, the only official method for detecting these by-products is light microscopy, which is highly dependent on the skills of a microscopist because it relies on particle recognition. In order to help the microscopist network to achieve high proficiency levels, it was necessary to create an online reference tool based on micrographs and accessible via an Intranet platform. Members of the National Reference Laboratories for animal proteins in feedingstuffs (NRL-AP and the International Association for Feedingstuff Analysis – Section Feedingstuff Microscopy (IAG have access to this micrographs collection. This paper describes how the online collection was created and what conditions had to be taken into account in creating such a tool. It also describes how information are periodically updated and managed within the context of the large amount of information included in each micrograph. The need for a robust back-office system as the foundation for all the research activities in this project is also covered, and the evaluation of the use of the online collection is discussed.

  7. Risk-assessment techniques and the reactor licensing process

    International Nuclear Information System (INIS)

    Levine, S.

    1979-01-01

    A brief description of the Reactor Safety Study (WASH-1400), concentrating on the engineering aspects of the contribution to reactor accident risks is followed by some comments on how we have applied the insights and techniques developed in this study to prepare a program to improve the safety of nuclear power plants. Some new work we are just beginning on the application of risk-assessment techniques to stablize the reactor licensing process is also discussed

  8. Assessment of the impact of innovation processes: methodological approaches

    Directory of Open Access Journals (Sweden)

    Demilkhanova B.A.

    2016-12-01

    Full Text Available in the article the prospects of development of innovative processes at a regional level the system of indicators of assessment effective components of innovation potential of the region. A conclusion about the predominance in the economy of the regions under study investment options for updating technology has been made based on the calculation and analysis of indicators of innovation investment in the fixed capital.

  9. Feed-Forward Neural Network Soft-Sensor Modeling of Flotation Process Based on Particle Swarm Optimization and Gravitational Search Algorithm

    Directory of Open Access Journals (Sweden)

    Jie-Sheng Wang

    2015-01-01

    Full Text Available For predicting the key technology indicators (concentrate grade and tailings recovery rate of flotation process, a feed-forward neural network (FNN based soft-sensor model optimized by the hybrid algorithm combining particle swarm optimization (PSO algorithm and gravitational search algorithm (GSA is proposed. Although GSA has better optimization capability, it has slow convergence velocity and is easy to fall into local optimum. So in this paper, the velocity vector and position vector of GSA are adjusted by PSO algorithm in order to improve its convergence speed and prediction accuracy. Finally, the proposed hybrid algorithm is adopted to optimize the parameters of FNN soft-sensor model. Simulation results show that the model has better generalization and prediction accuracy for the concentrate grade and tailings recovery rate to meet the online soft-sensor requirements of the real-time control in the flotation process.

  10. Assessment of the feeding value of South Dakota-grown field peas (Pisum sativum l.) for growing pigs.

    Science.gov (United States)

    Stein, H H; Benzoni, G; Bohlke, R A; Peters, D N

    2004-09-01

    Four experiments were conducted to investigate the feeding value of South Dakota-grown field peas (Pisum sativum L.) for growing pigs. In Exp. 1, 96 pigs (initial BW = 22 +/- 3.35 kg) were allotted to four treatment groups (four pigs per pen, six replicate pens per treatment) and fed growing (0.95% Lys) and finishing (0.68% Lys) diets containing 0, 12, 24, or 36% field peas (as-fed basis). There were no differences among the treatment groups in ADG, ADFI, or G:F. Likewise, there were no differences in backfat thickness or lean meat percent among treatment groups, but pigs fed diets containing 12, 24, or 36% field peas had greater (P feed ingredients. Experiment 4 was an energy balance experiment conducted to measure the DE and ME concentrations in field peas and corn. Six growing pigs (initial BW = 85.5 +/- 6.5 kg) were placed in metabolism cages and fed diets based on field peas or corn and arranged in a two-period switch-back design. The DE values for field peas and corn (3,864 and 3,879 kcal/kg DM, respectively) were similar, but the ME of corn was higher (P Dakota-grown field peas are highly digestible by growing pigs. Therefore, such field peas may be included in diets for nursery pigs and growing-finishing pigs in amounts of at least 18 and 36%, respectively, without negatively affecting pig performance.

  11. Aquatic environmental risk assessment of manganese processing industries.

    Science.gov (United States)

    Marks, Becky; Peters, Adam; McGough, Doreen

    2017-01-01

    An environmental risk assessment (ERA) has been conducted for sites producing and processing manganese and its inorganic compounds, focussing on potential risks to freshwater. A site specific questionnaire was used to collect information. Sites fall into three broad categories: mining sites, refining sites, and sites producing chemicals and pigments. Waste disposal is principally carried out by the treatment of liquid wastes to separate solids for disposal off-site with a consented wastewater discharge, or disposal on-site using evaporation or settlement ponds in order to maintain the waste materials in a suitable manner following site closure. The main source of emissions from refining and alloying sites is from the treatment of emissions to air using wet scrubber air filters. There is also the potential for fugitive environmental emissions of manganese from stockpiles of raw material held on-site. Data provided from the questionnaires were both site-specific and also commercially sensitive. Therefore, this paper has undertaken the manganese exposure assessment, using a probabilistic approach to reflect the distribution of emissions of manganese and also to maintain the confidentiality of site specific data. An inverse correlation was observed between the total annual tonnage of manganese processed at the site and the emission factor, such that sites processing larger quantities resulted in lower emissions of manganese per tonne processed. The hazard assessment determined a Predicted No Effect Concentration (PNEC) for freshwater using a species sensitivity distribution approach, resulting in a freshwater PNEC of 0.075mgL -1 for soluble manganese. Based on the exposure data and the freshwater PNEC derived for this study, the distributions of risk characterisation ratios using the probabilistic approach indicates that two thirds of manganese processing sites would not be expected to pose a potential risk to the local aquatic environment due to wastewater emissions

  12. Model and Analytic Processes for Export License Assessments

    Energy Technology Data Exchange (ETDEWEB)

    Thompson, Sandra E.; Whitney, Paul D.; Weimar, Mark R.; Wood, Thomas W.; Daly, Don S.; Brothers, Alan J.; Sanfilippo, Antonio P.; Cook, Diane; Holder, Larry

    2011-09-29

    This paper represents the Department of Energy Office of Nonproliferation Research and Development (NA-22) Simulations, Algorithms and Modeling (SAM) Program's first effort to identify and frame analytical methods and tools to aid export control professionals in effectively predicting proliferation intent; a complex, multi-step and multi-agency process. The report focuses on analytical modeling methodologies that alone, or combined, may improve the proliferation export control license approval process. It is a follow-up to an earlier paper describing information sources and environments related to international nuclear technology transfer. This report describes the decision criteria used to evaluate modeling techniques and tools to determine which approaches will be investigated during the final 2 years of the project. The report also details the motivation for why new modeling techniques and tools are needed. The analytical modeling methodologies will enable analysts to evaluate the information environment for relevance to detecting proliferation intent, with specific focus on assessing risks associated with transferring dual-use technologies. Dual-use technologies can be used in both weapons and commercial enterprises. A decision-framework was developed to evaluate which of the different analytical modeling methodologies would be most appropriate conditional on the uniqueness of the approach, data availability, laboratory capabilities, relevance to NA-22 and Office of Arms Control and Nonproliferation (NA-24) research needs and the impact if successful. Modeling methodologies were divided into whether they could help micro-level assessments (e.g., help improve individual license assessments) or macro-level assessment. Macro-level assessment focuses on suppliers, technology, consumers, economies, and proliferation context. Macro-level assessment technologies scored higher in the area of uniqueness because less work has been done at the macro level. An

  13. Bruce NGS B risk assessment (BBRA) peer review process

    International Nuclear Information System (INIS)

    Kaasalainen, S.; Crocker, W.P.; Webb, W.A.

    2001-01-01

    Risk-informed decision making is considered an effective approach to managing the risk of nuclear power plant operation in a competitive market. Hence, increased reliance on the station probabilistic risk assessments (PRAs) to provide risk perspective inputs is inevitable. With increased reliance on the PRAs it is imperative that PRAs have the characteristics necessary to provide the required information. Recognizing the increased requirements on nuclear power plant PRAs the nuclear industry in the United States has expended significant effort over the past few years defining the required characteristics of a PRA for various applications. More recently several owners groups have drafted guidelines for PRA certification and several U.S. utilities have had their PRAs certified. During the year 2000 Ontario Power Generation, Nuclear (OPG,N) subjected the PRA of one of its stations to the U.S. style certification process. The PRA selected for this process was the Bruce B Risk Assessment (BBRA). BBRA was chosen for this process since it is the first OPG, N PRA to be used for risk-informed applications. However, the strengths of the BBRA identified from the certification process and the lessons learned are also largely applicable to the other OPG, N plant PRAs due to the use of similar methods and tools

  14. Decision Gate Process for Assessment of a Technology Development Portfolio

    Science.gov (United States)

    Kohli, Rajiv; Fishman, Julianna; Hyatt, Mark

    2012-01-01

    The NASA Dust Management Project (DMP) was established to provide technologies (to TRL 6 development level) required to address adverse effects of lunar dust to humans and to exploration systems and equipment, which will reduce life cycle cost and risk, and will increase the probability of sustainable and successful lunar missions. The technology portfolio of DMP consisted of different categories of technologies whose final product is either a technology solution in itself, or one that contributes toward a dust mitigation strategy for a particular application. A Decision Gate Process (DGP) was developed to assess and validate the achievement and priority of the dust mitigation technologies as the technologies progress through the development cycle. The DGP was part of continuous technology assessment and was a critical element of DMP risk management. At the core of the process were technology-specific criteria developed to measure the success of each DMP technology in attaining the technology readiness levels assigned to each decision gate. The DGP accounts for both categories of technologies and qualifies the technology progression from technology development tasks to application areas. The process provided opportunities to validate performance, as well as to identify non-performance in time to adjust resources and direction. This paper describes the overall philosophy of the DGP and the methodology for implementation for DMP, and describes the method for defining the technology evaluation criteria. The process is illustrated by example of an application to a specific DMP technology.

  15. Material flow-based economic assessment of landfill mining processes.

    Science.gov (United States)

    Kieckhäfer, Karsten; Breitenstein, Anna; Spengler, Thomas S

    2017-02-01

    This paper provides an economic assessment of alternative processes for landfill mining compared to landfill aftercare with the goal of assisting landfill operators with the decision to choose between the two alternatives. A material flow-based assessment approach is developed and applied to a landfill in Germany. In addition to landfill aftercare, six alternative landfill mining processes are considered. These range from simple approaches where most of the material is incinerated or landfilled again to sophisticated technology combinations that allow for recovering highly differentiated products such as metals, plastics, glass, recycling sand, and gravel. For the alternatives, the net present value of all relevant cash flows associated with plant installation and operation, supply, recycling, and disposal of material flows, recovery of land and landfill airspace, as well as landfill closure and aftercare is computed with an extensive sensitivity analyses. The economic performance of landfill mining processes is found to be significantly influenced by the prices of thermal treatment (waste incineration as well as refuse-derived fuels incineration plant) and recovered land or airspace. The results indicate that the simple process alternatives have the highest economic potential, which contradicts the aim of recovering most of the resources. Copyright © 2016 Elsevier Ltd. All rights reserved.

  16. Environmental assessment for sustainable development: process, actors and practice

    International Nuclear Information System (INIS)

    Andre, P.; Delisle, C.E.; Reveret, J.-P.

    2003-01-01

    Multiple environmental problems afflict our contemporary world and have been the subject of discussions during many international meetings. All declarations resulting from these meetings insist on including environmental problems and on environmental assessment (EA) as an important tool to achieve this. This book aims to reach three objectives. First, it introduces EA to people from different disciplines, and therefore it opens up the perspective of new disciplinary horizons. Second, the authors discuss EA as a socio-political process rather than emphasizing methodologies. Third, this book draws mainly on the experience in Francophone countries which is still poorly disseminated. This book focusses on process and actors. Thus, the subject matter is divided into five major parts: the history and major issues of EA from a sustainable development perspective (Chapters 1 to 3); the actors, i.e. the Project Proponent and consulting firms, the public, the decision maker and international actors (Chapters 4 to 7); methods and tools including public participation (Chapters 8 and 9); processes in practice through step by step processes in practice and case studies (Chapters 10 and 11); and, finally, recent and upcoming developments in EA, including elements of strategic environmental assessment (Chapters 12 and 13). An index facilitates searching for information. The reader is also invited to consult the book's website

  17. Child Care Provider Adherence to Infant and Toddler Feeding Recommendations: Findings from the Baby Nutrition and Physical Activity Self-Assessment for Child Care (Baby NAP SACC) Study

    Science.gov (United States)

    Davison, Kirsten K.; Hesketh, Kathryn; Taveras, Elsie M.; Gillman, Matthew W.; Benjamin Neelon, Sara E.

    2015-01-01

    Abstract Background: Identifying characteristics associated with the Institute of Medicine's (IOM) recommended feeding practices among infant and toddler care providers in child care centers could help in preventing childhood obesity. Methods: In 2009, at baseline in a pilot intervention study of 29 licensed Massachusetts child care centers with at least 50% of enrolled children identified as racial minorities, 57 infant and 109 toddler providers completed feeding questionnaires. To assess provider adherence to six IOM-recommended behaviors, we used cluster-adjusted multivariable logistic regression models including provider type (infant or toddler), race, education, and center Child and Adult Care Food Program (CACFP) participation. Results: In multivariable analysis, CACFP participation was associated with providers sitting with children at meals (odds ratio [OR], 5.2; 95% confidence interval [CI], 1.2–21.7), offering fruits and vegetables (OR, 3.3; 95% CI 1.7–6.2), and limiting fast food (OR, 3.5; 95% CI, 1.8–6.7). Providers at centers serving meals family style were less likely to allow children to leave food unfinished (OR, 0.27; 95% CI, 0.09–0.77). Infant providers were more likely than toddler providers to sit with children at meals (OR, 6.98; 95% CI, 1.51–32.09), allow children to eat when hungry (OR, 3.50; 95% CI, 1.34–9.16), and avoid serving sugary (OR, 8.74; 95% CI, 3.05–25.06) or fast foods (OR, 11.56; 95% CI, 3.20–41.80). Conclusions: CACFP participation may encourage IOM-recommended feeding practices among infant and toddler providers. Child care providers may benefit from education about how to feed infants and toddlers responsively, especially when offering foods family style. Future research should explore ways to promote child-centered feeding practices, while addressing barriers to providing children with nutrient-rich foods. PMID:25918873

  18. Assessment of auditory processing in children with dyslalia

    Directory of Open Access Journals (Sweden)

    Wlodarczyk £.

    2011-09-01

    Full Text Available The objective of the work was to assess occurrence of central auditory processing disorders in children with dyslalia. Material and method. The material included 30 children at the age 798 years old being under long-term speech therapy care due to articulation disorders. All the children were subjected to the phoniatric and speech examination, including tonal and impedance audiometry, speech therapist's consultation and psychologist's consultation. Electrophysi-ological (N2, P2, N2, P2, P300 record and following psychoacoustic test of central auditory functions were performed (Frequency Pattern Test. Results. Analysis of the results revealed disorders in the process of sound analysis within frequency and P300 wave latency prolongation in children with dyslalia. Conclusions. Auditory processing disorders may be significant in development of correct articulation in children, they also may explain unsatisfactory results of long-term speech therapy

  19. The feed-out process: Rayleigh-Taylor and Richtmyer-Meshkov instabilities in thin, laser-driven foils

    Energy Technology Data Exchange (ETDEWEB)

    Smitherman, D.P.

    1998-04-01

    Eight beams carrying a shaped pulse from the NOVA laser were focused into a hohlraum with a total energy of about 25 kJ. A planar foil was placed on the side of the hohlraum with perturbations facing away from the hohlraum. All perturbations were 4 {micro}m in amplitude and 50 {micro}m in wavelength. Three foils of pure aluminum were shot with thicknesses and pulse lengths respectively of 86 {micro}m and 2. 2 ns, 50 {micro}m and 4.5 ns, and 35 {micro}m with both 2.2 ns and 4. 5 ns pulses. Two composite foils constructed respectively of 32 and 84 {micro}m aluminum on the ablative side and 10 {micro}m beryllium on the cold surface were also shot using the 2.2 ns pulse. X-ray framing cameras recorded perturbation growth using both face- and side-on radiography. The LASNEX code was used to model the experiments. A shock wave interacted with the perturbation on the cold surface generating growth from a Richtmyer-Meshkov instability and a strong acoustic mode. The cold surface perturbation fed-out to the Rayleigh-Taylor unstable ablation surface, both by differential acceleration and interface coupling, where it grew. A density jump did not appear to have a large effect on feed-out from interface coupling. The Rayleigh-Taylor instability`s vortex pairs overtook and reversed the direction of flow of the Richtmyer-Meshkov vortices, resulting in the foil moving from a sinuous to a bubble and spike configuration. The Rayleigh-Taylor instability may have acted as an ablative instability on the hot surface, and as a classical instability on the cold surface, on which grew second and third order harmonics.

  20. Accelerator Production of Tritium project process waste assessment

    International Nuclear Information System (INIS)

    Carson, S.D.; Peterson, P.K.

    1995-09-01

    DOE has made a commitment to compliance with all applicable environmental regulatory requirements. In this respect, it is important to consider and design all tritium supply alternatives so that they can comply with these requirements. The management of waste is an integral part of this activity and it is therefore necessary to estimate the quantities and specific wastes that will be generated by all tritium supply alternatives. A thorough assessment of waste streams includes waste characterization, quantification, and the identification of treatment and disposal options. The waste assessment for APT has been covered in two reports. The first report was a process waste assessment (PWA) that identified and quantified waste streams associated with both target designs and fulfilled the requirements of APT Work Breakdown Structure (WBS) Item 5.5.2.1. This second report is an expanded version of the first that includes all of the data of the first report, plus an assessment of treatment and disposal options for each waste stream identified in the initial report. The latter information was initially planned to be issued as a separate Waste Treatment and Disposal Options Assessment Report (WBS Item 5.5.2.2)

  1. Accelerator Production of Tritium project process waste assessment

    Energy Technology Data Exchange (ETDEWEB)

    Carson, S.D.; Peterson, P.K.

    1995-09-01

    DOE has made a commitment to compliance with all applicable environmental regulatory requirements. In this respect, it is important to consider and design all tritium supply alternatives so that they can comply with these requirements. The management of waste is an integral part of this activity and it is therefore necessary to estimate the quantities and specific wastes that will be generated by all tritium supply alternatives. A thorough assessment of waste streams includes waste characterization, quantification, and the identification of treatment and disposal options. The waste assessment for APT has been covered in two reports. The first report was a process waste assessment (PWA) that identified and quantified waste streams associated with both target designs and fulfilled the requirements of APT Work Breakdown Structure (WBS) Item 5.5.2.1. This second report is an expanded version of the first that includes all of the data of the first report, plus an assessment of treatment and disposal options for each waste stream identified in the initial report. The latter information was initially planned to be issued as a separate Waste Treatment and Disposal Options Assessment Report (WBS Item 5.5.2.2).

  2. Quantitative Microbial Risk Assessment for in Natural and Processed Cheeses

    Directory of Open Access Journals (Sweden)

    Heeyoung Lee

    2016-08-01

    Full Text Available This study evaluated the risk of Clostridium perfringens (C. perfringens foodborne illness from natural and processed cheeses. Microbial risk assessment in this study was conducted according to four steps: hazard identification, hazard characterization, exposure assessment, and risk characterization. The hazard identification of C. perfringens on cheese was identified through literature, and dose response models were utilized for hazard characterization of the pathogen. For exposure assessment, the prevalence of C. perfringens, storage temperatures, storage time, and annual amounts of cheese consumption were surveyed. Eventually, a simulation model was developed using the collected data and the simulation result was used to estimate the probability of C. perfringens foodborne illness by cheese consumption with @RISK. C. perfringens was determined to be low risk on cheese based on hazard identification, and the exponential model (r = 1.82×10−11 was deemed appropriate for hazard characterization. Annual amounts of natural and processed cheese consumption were 12.40±19.43 g and 19.46±14.39 g, respectively. Since the contamination levels of C. perfringens on natural (0.30 Log CFU/g and processed cheeses (0.45 Log CFU/g were below the detection limit, the initial contamination levels of natural and processed cheeses were estimated by beta distribution (α1 = 1, α2 = 91; α1 = 1, α2 = 309×uniform distribution (a = 0, b = 2; a = 0, b = 2.8 to be −2.35 and −2.73 Log CFU/g, respectively. Moreover, no growth of C. perfringens was observed for exposure assessment to simulated conditions of distribution and storage. These data were used for risk characterization by a simulation model, and the mean values of the probability of C. perfringens foodborne illness by cheese consumption per person per day for natural and processed cheeses were 9.57×10−14 and 3.58×10−14, respectively. These results indicate that probability of C. perfringens

  3. Safety assessment of food and feed from biotechnology-derived crops employing RNA-mediated gene regulation to achieve desired traits: a scientific review.

    Science.gov (United States)

    Petrick, Jay S; Brower-Toland, Brent; Jackson, Aimee L; Kier, Larry D

    2013-07-01

    Gene expression can be modulated in plants to produce desired traits through agricultural biotechnology. Currently, biotechnology-derived crops are compared to their conventional counterparts, with safety assessments conducted on the genetic modification and the intended and unintended differences. This review proposes that this comparative safety assessment paradigm is appropriate for plants modified to express mediators of RNA-mediated gene regulation, including RNA interference (RNAi), a gene suppression mechanism that naturally occurs in plants and animals. The molecular mediators of RNAi, including long double-stranded RNAs (dsRNA), small interfering RNAs (siRNA), and microRNAs (miRNA), occur naturally in foods; therefore, there is an extensive history of safe consumption. Systemic exposure following consumption of plants containing dsRNAs that mediate RNAi is limited in higher organisms by extensive degradation of ingested nucleic acids and by biological barriers to uptake and efficacy of exogenous nucleic acids. A number of mammalian RNAi studies support the concept that a large margin of safety will exist for any small fraction of RNAs that might be absorbed following consumption of foods from biotechnology-derived plants that employ RNA-mediated gene regulation. Food and feed derived from these crops utilizing RNA-based mechanisms is therefore expected to be as safe as food and feed derived through conventional plant breeding. Copyright © 2013 Elsevier Inc. All rights reserved.

  4. Utilization of cellulosic materials through enzymic hydrolysis. 11. Preliminary assessment of an integrated processing scheme

    Energy Technology Data Exchange (ETDEWEB)

    Wilke, C R; Cysewski, G R; Yang, R D

    1976-01-01

    An integrated processing scheme is described for the conversion of a cellulose waste (newsprint) to sugars by enzymic hydrolysis and then to ethanol and yeast by fermentation. The unconverted solids are burned to produce process energy requirements and surplus electric power. With the preliminary design at an estimate total capital investment of $33.4 x 10/sup 6/, 95% ethanol may be produced FOB (free on board) the plant for approx.61 cents/gal, assuming zero cost for cellulosic feed; taking into account interest rates and taxes and a cellulose feed cost of $20/ton the figure becomes $1.67/gal.

  5. Utilization of new feeding technology in power production from biomass; safety aspects and techno-economic assessment

    Energy Technology Data Exchange (ETDEWEB)

    Wilen, C.; Rautalin, A. [VTT Energy, Espoo (Finland)

    1998-12-01

    The possibility to prevent the dust explosions by suppression method in the ignition stage has been investigated in the project `Suppression of dust explosions in biomass-fired plants` (Bioenergy Research programme 1995). The first stage of the dust explosion and suppression tests under elevated pressure were carried out in spring 1996 in England using the 5.6 m{sup 3} equipment constructed for this purpose. The tests were carried out both with coal and wood dusts. The tests were carried out by Coal Technology Development Division (British Coal) and Kidde Fire Protection. In the first stage of the project it was possible to suppress both the coal and wood dust explosions successfully at the 10 bar pressure level. The target of the second stage of the project is to carry out the tests also at 18 bar pressure level. These tests would, if successful, enable the extrapolation of the operational parameters the pressure levels of 20-25 bars of IGCC plants. The limiting factors for the planning of pressurized (and ambient pressure) feeding systems are now known relatively well on the basis of the knowledge gained in the dust explosion and self-ignition tests, and the dust explosion suppression tests. The total objective of the research is the comparison of pressurized feeding systems, based mainly on the lock-hopper technology, both in the economical and technical sense. Arrangement of pressurization and sufficient inertization form a significant factor. The newest pressurized double-screw and piston feeder technologies will also be considered. The second stage of the suppression tests has been carried out in the first stage of the project. The suppression tests were successful both with coal and biomass dusts when using four suppression media containers. The full pressure dust explosions were carried out successfully at 18 bar initial pressure 4 refs., 2 figs., 1 tab. Bioenergy Research programme

  6. Impact Assessment and Environmental Evaluation of Various Ammonia Production Processes

    Science.gov (United States)

    Bicer, Yusuf; Dincer, Ibrahim; Vezina, Greg; Raso, Frank

    2017-05-01

    In the current study, conventional resources-based ammonia generation routes are comparatively studied through a comprehensive life cycle assessment. The selected ammonia generation options range from mostly used steam methane reforming to partial oxidation of heavy oil. The chosen ammonia synthesis process is the most common commercially available Haber-Bosch process. The essential energy input for the methods are used from various conventional resources such as coal, nuclear, natural gas and heavy oil. Using the life cycle assessment methodology, the environmental impacts of selected methods are identified and quantified from cradle to gate. The life cycle assessment outcomes of the conventional resources based ammonia production routes show that nuclear electrolysis-based ammonia generation method yields the lowest global warming and climate change impacts while the coal-based electrolysis options bring higher environmental problems. The calculated greenhouse gas emission from nuclear-based electrolysis is 0.48 kg CO2 equivalent while it is 13.6 kg CO2 per kg of ammonia for coal-based electrolysis method.

  7. Assessment of children coming into care: processes, pitfalls and partnerships.

    Science.gov (United States)

    Chambers, Megan F; Saunders, Alison M; New, Brendan D; Williams, Catherine L; Stachurska, Anna

    2010-10-01

    Children in out-of-home care (OOHC) present with high levels of physical, developmental and emotional and behavioural difficulties, yet often fail to receive appropriate services. This article describes a joint health and welfare service specifically developed to provide comprehensive physical, developmental and mental health assessments to a cohort of children entering long-term care in one region of Sydney, New South Wales (NSW), Australia. Paediatric, allied health, dental and psychosocial assessments were co-ordinated from a single referral from the child's welfare case manager. Follow-up appointments were held 6-12 months later to assess the outcomes of recommendations. Physical, mental health and developmental difficulties in the children are reported, the implications for service requirements are presented and process blocks described. There is a need for a specific co-ordinating service to overcome the inherent fragmentation of this group (related both to transience and change in the welfare sector, and levels of comorbidity and chronicity in health presentations). Health and Welfare services must operate together, with an awareness of the processes and resource constraints in each sector, if they are to deliver sustainable and reliable health care to this vulnerable group.

  8. Impact Assessment and Environmental Evaluation of Various Ammonia Production Processes.

    Science.gov (United States)

    Bicer, Yusuf; Dincer, Ibrahim; Vezina, Greg; Raso, Frank

    2017-05-01

    In the current study, conventional resources-based ammonia generation routes are comparatively studied through a comprehensive life cycle assessment. The selected ammonia generation options range from mostly used steam methane reforming to partial oxidation of heavy oil. The chosen ammonia synthesis process is the most common commercially available Haber-Bosch process. The essential energy input for the methods are used from various conventional resources such as coal, nuclear, natural gas and heavy oil. Using the life cycle assessment methodology, the environmental impacts of selected methods are identified and quantified from cradle to gate. The life cycle assessment outcomes of the conventional resources based ammonia production routes show that nuclear electrolysis-based ammonia generation method yields the lowest global warming and climate change impacts while the coal-based electrolysis options bring higher environmental problems. The calculated greenhouse gas emission from nuclear-based electrolysis is 0.48 kg CO 2 equivalent while it is 13.6 kg CO 2 per kg of ammonia for coal-based electrolysis method.

  9. Assessing fit in Bayesian models for spatial processes

    KAUST Repository

    Jun, M.

    2014-09-16

    © 2014 John Wiley & Sons, Ltd. Gaussian random fields are frequently used to model spatial and spatial-temporal data, particularly in geostatistical settings. As much of the attention of the statistics community has been focused on defining and estimating the mean and covariance functions of these processes, little effort has been devoted to developing goodness-of-fit tests to allow users to assess the models\\' adequacy. We describe a general goodness-of-fit test and related graphical diagnostics for assessing the fit of Bayesian Gaussian process models using pivotal discrepancy measures. Our method is applicable for both regularly and irregularly spaced observation locations on planar and spherical domains. The essential idea behind our method is to evaluate pivotal quantities defined for a realization of a Gaussian random field at parameter values drawn from the posterior distribution. Because the nominal distribution of the resulting pivotal discrepancy measures is known, it is possible to quantitatively assess model fit directly from the output of Markov chain Monte Carlo algorithms used to sample from the posterior distribution on the parameter space. We illustrate our method in a simulation study and in two applications.

  10. Assessing fit in Bayesian models for spatial processes

    KAUST Repository

    Jun, M.; Katzfuss, M.; Hu, J.; Johnson, V. E.

    2014-01-01

    © 2014 John Wiley & Sons, Ltd. Gaussian random fields are frequently used to model spatial and spatial-temporal data, particularly in geostatistical settings. As much of the attention of the statistics community has been focused on defining and estimating the mean and covariance functions of these processes, little effort has been devoted to developing goodness-of-fit tests to allow users to assess the models' adequacy. We describe a general goodness-of-fit test and related graphical diagnostics for assessing the fit of Bayesian Gaussian process models using pivotal discrepancy measures. Our method is applicable for both regularly and irregularly spaced observation locations on planar and spherical domains. The essential idea behind our method is to evaluate pivotal quantities defined for a realization of a Gaussian random field at parameter values drawn from the posterior distribution. Because the nominal distribution of the resulting pivotal discrepancy measures is known, it is possible to quantitatively assess model fit directly from the output of Markov chain Monte Carlo algorithms used to sample from the posterior distribution on the parameter space. We illustrate our method in a simulation study and in two applications.

  11. An assessment of the process capabilities of nanoimprint lithography

    Science.gov (United States)

    Balla, Tobias; Spearing, S. Mark; Monk, Andrew

    2008-09-01

    Nanoimprint lithography (NIL) is an emerging nanofabrication tool, able to replicate imprint patterns quickly and at high volumes. The present study was performed in order to define the capabilities of NIL, based on a study of published research and to identify the application areas where NIL has the greatest potential. The process attributes of different NIL process chains were analysed, and their process capabilities were compared to identify trends and process limitations. The attributes chosen include the line width, relief height, initial resist thickness, residual layer thickness, imprint area and line width tolerances. In each case well-defined limits can be identified, which are a direct result of the mechanisms involved in the NIL process. These quantitative results were compared with the assessments of individuals in academia and within the microfabrication industry. The results suggest NIL is most suited to producing photonic, microfluidic and patterned media applications, with photonic applications the closest to market. NIL needs to address overlay alignment issues for wider use, while an analysis is needed for each market, as to whether NIL adds value.

  12. Assessment of very high temperature reactors in process applications

    International Nuclear Information System (INIS)

    Jones, J.E. Jr.; Spiewak, I.; Gambill, W.R.

    1976-01-01

    In April 1974, the United States Energy Research and Development Administration (ERDA) authorized General Atomic Company, General Electric Company, and Westinghouse Astronuclear Laboratory to assess the available technology for producing process heat utilizing a very high temperature nuclear reactor (VHTR). The VHTR is defined as a gas-cooled graphite-moderated reactor. Oak Ridge National Laboratory has been given a lead role in evaluating the VHTR reactor studies and potential applications of the VHTR. Process temperatures up to the 760 to 871 0 C range appear to be achievable with near-term technology. The major development considerations are high temperature materials, the safety questions (especially regarding the need for an intermediate heat exchanger) and the process heat exchanger. The potential advantages of the VHTR over competing fossil energy sources are conservation of fossil fuels and reduced atmospheric impacts. Costs are developed for nuclear process heat supplied from a 3000-MW(th) VHTR. The range of cost in process applications is competitive with current fossil fuel alternatives

  13. Assessing Potential Additional PFAS Retention Processes in the Subsurface

    Science.gov (United States)

    Brusseau, M. L.

    2017-12-01

    Understanding the transport and fate of per- and poly-fluorinated alkyl substances (PFASs) in the subsurface is critical for accurate risk assessments and design of effective remedial actions. Current conceptual and mathematical models are based on an assumption that solid-phase adsorption is the sole source of retention for PFASs. However, additional retention processes may be relevant for PFAS compounds in vadose-zone systems and in source zones that contain trapped immiscible organic liquids. These include adsorption at the air-water interface, partitioning to the soil atmosphere, adsorption at the NAPL-water interface, and absorption by NAPL. A multi-process retention model is proposed to account for these potential additional sources of PFAS retardation. An initial assessment of the relative magnitudes and significance of these retention processes was conducted for three representative PFASs, perfluorooctanoic acid (PFOA), perfluorooctane sulfonate (PFOS), and 8:2 fluorotelomer alcohol (FTOH). Data collected from the literature were used to determine measured or estimated values for the relevant distribution coefficients, which were in turn used to calculate retardation factors for a representative porous medium. Adsorption at the air-water interface was shown to be a primary source of retention for PFOA and PFOS, contributing approximately 80% of total retardation. Adsorption to NAPL-water interfaces and absorption by bulk NAPL were also shown to be significant sources of retention for PFOS and PFOA. The latter process was the predominant source of retention for 8:2 FTOH, contributing 98% of total retardation. These results indicate that we may anticipate significant retention of PFASs by these additional processes. In such cases, retardation of PFASs in source areas may be significantly greater than what is typically estimated based on the standard assumption of solid-phase adsorption as the sole retention mechanism. This has significant ramifications for

  14. Assessing a Historically Hispanic Serving Institution Internationalization Process

    Directory of Open Access Journals (Sweden)

    Flavia Iuspa

    2014-09-01

    Full Text Available This article presents a qualitative study conducted at a Historically Hispanic Serving Institution (HHSI to further the understanding of its internationalization decision-making process. The study uses the Internationalization Cube model to review the institution’s internal processes and policies toward internationalization and assess how its international activities align with its internationalization efforts. The Internationalization Cube, an eight-cell model, permits the positioning of Institutions of Higher Education (IHEs based on the analysis of its three dimensions and respective subcategories: policy, support, and implementation. The International Dimension Index (IDI and the Item Relevancy Index (IRI were also used to determine the level of alignment between the HHSI position on the Internationalization Cube and its international activities. The study finds that the HHSI is on Position 6 on the Internationalization Cube (priority policy, one-sided support, and systematic/structure implementation, and exhibits all the international activities considered indicators of internationalization but attention is needed to foreign language, international students, study abroad, faculty movement and involvement in international projects. The study concludes that an association exists between the institution’s position on the Internationalization Cube and its international activities, and adjustments in the institution’s policy, support, and implementation dimensions will be required to advance its position on the Internationalization Cube making its internationalization process more sustainable. This study makes a contribution to addressing the need to assess an IHE by presenting a holistic organizational framework instead of a fragmented international activities organizational analysis.

  15. The Canadian environmental assessment process: current process, expected reforms, and implications for the nuclear industry

    International Nuclear Information System (INIS)

    Connelly, R.G.

    1994-01-01

    The Environmental Assessment and Review Process Guidelines Order (EARP) was the Canadian federal law governing environmental assessment of projects. EARP had been subject to misinterpretation, had been significantly modified in different directions as a result of numerous court cases, and no longer accurately reflected government policy. Parliament therefore passed the Canadian Environmental Assessment Act (CEAA), which received Royal Assent in 1992, but had still not been proclaimed at the time of the conference, pending a review of draft regulations. CEAA will speed up stalled projects, particularly in the Saskatchewan uranium mining industry, by removing uncertainty and by permitting more focussed, flexible, and consistent public reviews; it defines what kind of government projects require approval; it provides for integration of environmental concerns into federal decision making, e.g. by the AECB; it will allow less expensive and more timely environmental assessments

  16. Redesign of the Attention Process of Patients with Rheumatologic Diseases: Assessing the Performance with Analytic Hierarchy Process

    OpenAIRE

    Gorbanev, Iouri; Cortes, Ariel; Agudelo-Londoño, Sandra

    2017-01-01

    Objective. To compare the Business process management and the analytic hierarchy process as the tools of process performance assessment. Instruments and Methods. Case study of the attention process of rheumatology patients. Business process management and analytic hierarchy process were applied to assess the redesign of the attention process. The two methods were compared. The data were obtained through personal observations, an interview with a Colombian health insurer’s senior executive, an...

  17. Modeling risk assessment for nuclear processing plants with LAVA

    International Nuclear Information System (INIS)

    Smith, S.T.; Tisinger, R.M.

    1988-01-01

    Using the Los Alamos Vulnerability and Risk Assessment (LAVA) methodology, the authors developed a model for assessing risks associated with nuclear processing plants. LAVA is a three-part systematic approach to risk assessment. The first part is the mathematical methodology; the second is the general personal computer-based software engine; and the third is the application itself. The methodology provides a framework for creating applications for the software engine to operate upon; all application-specific information is data. Using LAVA, the authors build knowledge-based expert systems to assess risks in applications systems comprising a subject system and a safeguards system. The subject system model is sets of threats, assets, and undesirable outcomes. The safeguards system model is sets of safeguards functions for protecting the assets from the threats by preventing or ameliorating the undesirable outcomes, sets of safeguards subfunctions whose performance determine whether the function is adequate and complete, and sets of issues, appearing as interactive questionnaires, whose measures (in both monetary and linguistic terms) define both the weaknesses in the safeguards system and the potential costs of an undesirable outcome occurring

  18. The Pediatrics Milestones Assessment Pilot: Development of Workplace-Based Assessment Content, Instruments, and Processes.

    Science.gov (United States)

    Hicks, Patricia J; Margolis, Melissa; Poynter, Sue E; Chaffinch, Christa; Tenney-Soeiro, Rebecca; Turner, Teri L; Waggoner-Fountain, Linda; Lockridge, Robin; Clyman, Stephen G; Schwartz, Alan

    2016-05-01

    To report on the development of content and user feedback regarding the assessment process and utility of the workplace-based assessment instruments of the Pediatrics Milestones Assessment Pilot (PMAP). One multisource feedback instrument and two structured clinical observation instruments were developed and refined by experts in pediatrics and assessment to provide evidence for nine competencies based on the Pediatrics Milestones (PMs) and chosen to inform residency program faculty decisions about learners' readiness to serve as pediatric interns in the inpatient setting. During the 2012-2013 PMAP study, 18 U.S. pediatric residency programs enrolled interns and subinterns. Faculty, residents, nurses, and other observers used the instruments to assess learner performance through direct observation during a one-month rotation. At the end of the rotation, data were aggregated for each learner, milestone levels were assigned using a milestone classification form, and feedback was provided to learners. Learners and site leads were surveyed and/or interviewed about their experience as participants. Across the sites, 2,338 instruments assessing 239 learners were completed by 630 unique observers. Regarding end-of-rotation feedback, 93% of learners (128/137) agreed the assessments and feedback "helped me understand how those with whom I work perceive my performance," and 85% (117/137) agreed they were "useful for constructing future goals or identifying a developmental path." Site leads identified several benefits and challenges to the assessment process. PM-based instruments used in workplace-based assessment provide a meaningful and acceptable approach to collecting evidence of learner competency development. Learners valued feedback provided by PM-based assessment.

  19. Use of Probabilistic Risk Assessment in Shuttle Decision Making Process

    Science.gov (United States)

    Boyer, Roger L.; Hamlin, Teri, L.

    2011-01-01

    This slide presentation reviews the use of Probabilistic Risk Assessment (PRA) to assist in the decision making for the shuttle design and operation. Probabilistic Risk Assessment (PRA) is a comprehensive, structured, and disciplined approach to identifying and analyzing risk in complex systems and/or processes that seeks answers to three basic questions: (i.e., what can go wrong? what is the likelihood of these occurring? and what are the consequences that could result if these occur?) The purpose of the Shuttle PRA (SPRA) is to provide a useful risk management tool for the Space Shuttle Program (SSP) to identify strengths and possible weaknesses in the Shuttle design and operation. SPRA was initially developed to support upgrade decisions, but has evolved into a tool that supports Flight Readiness Reviews (FRR) and near real-time flight decisions. Examples of the use of PRA for the shuttle are reviewed.

  20. A comparative life cycle assessment of process water treatment ...

    African Journals Online (AJOL)

    2011-07-29

    Jul 29, 2011 ... into the co-disposal of saline wastewater with ash (Ras, 2011). These efforts have .... Feed water is dosed at 5 mg/ℓ with chlorine gas (0.15 kg/Mℓ. BFW), and .... technologies relative to a selection of the impact categories for ...

  1. Environmental assessment for the Processing and Environmental Technology Laboratory (PETL)

    International Nuclear Information System (INIS)

    1995-09-01

    The U.S. Department of Energy (DOE) has prepared an environmental assessment (EA) on the proposed Processing and Environmental Technology Laboratory (PETC) at Sandia National Laboratories/New Mexico (SNL/NM). This facility is needed to integrate, consolidate, and enhance the materials science and materials process research and development (R ampersand D) currently in progress at SNL/NM. Based on the analyses in the EA, DOE has determined that the proposed action is not a major Federal action significantly affecting the quality of the human environment within the meaning of the National Environmental Policy Act (NEPA) of 1969. Therefore, an environmental impact statement is not required, and DOE is issuing this Finding of No Significant Impact (FONSI)

  2. Environmental assessment for the Processing and Environmental Technology Laboratory (PETL)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    The U.S. Department of Energy (DOE) has prepared an environmental assessment (EA) on the proposed Processing and Environmental Technology Laboratory (PETC) at Sandia National Laboratories/New Mexico (SNL/NM). This facility is needed to integrate, consolidate, and enhance the materials science and materials process research and development (R&D) currently in progress at SNL/NM. Based on the analyses in the EA, DOE has determined that the proposed action is not a major Federal action significantly affecting the quality of the human environment within the meaning of the National Environmental Policy Act (NEPA) of 1969. Therefore, an environmental impact statement is not required, and DOE is issuing this Finding of No Significant Impact (FONSI).

  3. Application of the Hydroecological Integrity Assessment Process for Missouri Streams

    Science.gov (United States)

    Kennen, Jonathan G.; Henriksen, James A.; Heasley, John; Cade, Brian S.; Terrell, James W.

    2009-01-01

    Natural flow regime concepts and theories have established the justification for maintaining or restoring the range of natural hydrologic variability so that physiochemical processes, native biodiversity, and the evolutionary potential of aquatic and riparian assemblages can be sustained. A synthesis of recent research advances in hydroecology, coupled with stream classification using hydroecologically relevant indices, has produced the Hydroecological Integrity Assessment Process (HIP). HIP consists of (1) a regional classification of streams into hydrologic stream types based on flow data from long-term gaging-station records for relatively unmodified streams, (2) an identification of stream-type specific indices that address 11 subcomponents of the flow regime, (3) an ability to establish environmental flow standards, (4) an evaluation of hydrologic alteration, and (5) a capacity to conduct alternative analyses. The process starts with the identification of a hydrologic baseline (reference condition) for selected locations, uses flow data from a stream-gage network, and proceeds to classify streams into hydrologic stream types. Concurrently, the analysis identifies a set of non-redundant and ecologically relevant hydrologic indices for 11 subcomponents of flow for each stream type. Furthermore, regional hydrologic models for synthesizing flow conditions across a region and the development of flow-ecology response relations for each stream type can be added to further enhance the process. The application of HIP to Missouri streams identified five stream types ((1) intermittent, (2) perennial runoff-flashy, (3) perennial runoff-moderate baseflow, (4) perennial groundwater-stable, and (5) perennial groundwater-super stable). Two Missouri-specific computer software programs were developed: (1) a Missouri Hydrologic Assessment Tool (MOHAT) which is used to establish a hydrologic baseline, provide options for setting environmental flow standards, and compare past and

  4. Evaluation process of global environmental impact: assessment guidelines

    International Nuclear Information System (INIS)

    Memon, A.R.; Mahar, R.B.

    2001-01-01

    In developed and developing countries, the EIA (Environmental Impact Assessment) is becoming mandatory for the approval of Industrial projects and projects of Environmental hazards. The approving authority of each country has its own guidelines to get projects approved and make project proponents responsible to submit Environmental Impact Statement for the its detailed assessment. In this paper authors have studied an existing EIA Global guidelines and its evaluation process of altogether 40 countries from four continents, Asia, Pacific/Middle East, Europe, Australia and America/Canada. This evaluation process is recorded in the tabulation form and it has been formulated stage wise in which stage one highlights the inception of EIA guidelines of each country and stage two and three gives implementation process. The inception stage of guidelines gives an idea that when EIA was started and an implementation stages provide all information that when EIA become a part of legislation that provide an opportunity to the reader to understand the decision making process for project approvals. The main objective of writing EIA guidelines is to monitor the sustain ability of various types of the projects under different sectoral guidelines, therefore Projects related with different Sectors have been chosen and a detailed record in tabulation form gives an idea to understand the interaction of these guidelines. To make this paper more comprehensive, authors have gone thorough the sectoral guidelines of altogether 64 countries and studied 21 sector oriented project fields. These are of Agriculture/Irrigation, Biodiversity, Coastal/Marine, Community Participation, Extractive industries, Fisheries, Forestry, Hazard Risk, Health, Human settlement, Industry, Multi sectorial, Ports and Harbors, Power, refugees/resettlement, Social, Strategies/Planning, Tourism/Recreational, transportation, Waste Pollution and Wetlands/Water resources. (author)

  5. Integrated Process for Ethanol, Biogas, and Edible Filamentous Fungi-Based Animal Feed Production from Dilute Phosphoric Acid-Pretreated Wheat Straw.

    Science.gov (United States)

    Nair, Ramkumar B; Kabir, Maryam M; Lennartsson, Patrik R; Taherzadeh, Mohammad J; Horváth, Ilona Sárvári

    2018-01-01

    Integration of wheat straw for a biorefinery-based energy generation process by producing ethanol and biogas together with the production of high-protein fungal biomass (suitable for feed application) was the main focus of the present study. An edible ascomycete fungal strain Neurospora intermedia was used for the ethanol fermentation and subsequent biomass production from dilute phosphoric acid (0.7 to 1.2% w/v) pretreated wheat straw. At optimum pretreatment conditions, an ethanol yield of 84 to 90% of the theoretical maximum, based on glucan content of substrate straw, was observed from fungal fermentation post the enzymatic hydrolysis process. The biogas production from the pretreated straw slurry showed an improved methane yield potential up to 162% increase, as compared to that of the untreated straw. Additional biogas production, using the syrup, a waste stream obtained post the ethanol fermentation, resulted in a combined total energy output of 15.8 MJ/kg wheat straw. Moreover, using thin stillage (a waste stream from the first-generation wheat-based ethanol process) as a co-substrate to the biogas process resulted in an additional increase by about 14 to 27% in the total energy output as compared to using only wheat straw-based substrates. ᅟ.

  6. From food to feed: Assessment of the stationary lift net fishery of East Hainan, Northern South China Sea

    Science.gov (United States)

    Krumme, Uwe; Wang, Tian C.; Wang, Dao R.

    2013-04-01

    In the Asia-Pacific region, the increasing demand for low value/trash fish as feed for mariculture drives unsustainable fisheries on already overexploited marine resources. The mariculture demand may also affect artisanal nearshore fisheries operating in shallow nursery grounds, e.g., lift net fisheries, but little is known about how they work. We describe the stationary lift net artisanal fishery on the East coast of Hainan Island (northern South China Sea). A trapezoidal blanket net (mean surface area: 478 m2), stretched between four upright poles at the corners, is lowered and lifted via a rope system from a tower by a single fisher. In 2009 ˜200 households depended on 288 lift nets, 82% of which were located in the Wenchang/Wenjiao estuary. The number of lift nets decreased by 15% from 2007 to 2009. Presently, it is mainly an early retirement activity of fishers with a median age of 52 years and younger men rarely enter the fishery due to low catch rates. However, not one fisher would stop fishing even at 50% hypothetical decline in catch — due to lack of alternatives. Mean catch weight per fishing day is 12 kg (range: 0-1.7 t). In the past, the entire catch was used as food. Presently, an average of 52% of the catch is sold as feed to local pond and floating net cage mariculturists who, subsequently, supply the live food trade to markets as far as Hong Kong. Larger dead fishes are sold at village markets or at Qinglan harbor and are locally or regionally consumed. The density of lift-net operation is highest around the Wenchang/Wenjiao lagoon due to the presence of an extensive sheltered, shallow subtidal area in proximity to mariculture and export markets in Qinglan. Thus, the modern mariculture demand for low value/trash fish supports the continuation of an ancient artisanal fishery despite severe resource depletion. The existence of similar lift nets in Vietnam points to an exchange in the artisanal fishing knowledge between Vietnam and Hainan

  7. Economic assessment of advanced flue gas desulfurization processes. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Bierman, G. R.; May, E. H.; Mirabelli, R. E.; Pow, C. N.; Scardino, C.; Wan, E. I.

    1981-09-01

    This report presents the results of a project sponsored by the Morgantown Energy Technology Center (METC). The purpose of the study was to perform an economic and market assessment of advanced flue gas desulfurization (FGD) processes for application to coal-fired electric utility plants. The time period considered in the study is 1981 through 1990, and costs are reported in 1980 dollars. The task was divided into the following four subtasks: (1) determine the factors affecting FGD cost evaluations; (2) select FGD processes to be cost-analyzed; (3) define the future electric utility FGD system market; and (4) perform cost analyses for the selected FGD processes. The study was initiated in September 1979, and separate reports were prepared for the first two subtasks. The results of the latter two subtasks appear only in this final reprot, since the end-date of those subtasks coincided with the end-date of the overall task. The Subtask 1 report, Criteria and Methods for Performing FGD Cost Evaluations, was completed in October 1980. A slightly modified and condensed version of that report appears as appendix B to this report. The Subtask 2 report, FGD Candidate Process Selection, was completed in January 1981, and the principal outputs of that subtask appear in Appendices C and D to this report.

  8. Quality assessment of digested sludges produced by advanced stabilization processes.

    Science.gov (United States)

    Braguglia, C M; Coors, A; Gallipoli, A; Gianico, A; Guillon, E; Kunkel, U; Mascolo, G; Richter, E; Ternes, T A; Tomei, M C; Mininni, G

    2015-05-01

    The European Union (EU) Project Routes aimed to discover new routes in sludge stabilization treatments leading to high-quality digested sludge, suitable for land application. In order to investigate the impact of different enhanced sludge stabilization processes such as (a) thermophilic digestion integrated with thermal hydrolysis pretreatment (TT), (b) sonication before mesophilic/thermophilic digestion (UMT), and (c) sequential anaerobic/aerobic digestion (AA) on digested sludge quality, a broad class of conventional and emerging organic micropollutants as well as ecotoxicity was analyzed, extending the assessment beyond the parameters typically considered (i.e., stability index and heavy metals). The stability index was improved by adding aerobic posttreatment or by operating dual-stage process but not by pretreatment integration. Filterability was worsened by thermophilic digestion, either alone (TT) or coupled with mesophilic digestion (UMT). The concentrations of heavy metals, present in ranking order Zn > Cu > Pb > Cr ~ Ni > Cd > Hg, were always below the current legal requirements for use on land and were not removed during the processes. Removals of conventional and emerging organic pollutants were greatly enhanced by performing double-stage digestion (UMT and AA treatment) compared to a single-stage process as TT; the same trend was found as regards toxicity reduction. Overall, all the digested sludges exhibited toxicity to the soil bacterium Arthrobacter globiformis at concentrations about factor 100 higher than the usual application rate of sludge to soil in Europe. For earthworms, a safety margin of factor 30 was generally achieved for all the digested samples.

  9. Hanford's self-assessment of the solid waste forecast process

    International Nuclear Information System (INIS)

    Hauth, J.; Skumanich, M.; Morgan, J.

    1996-01-01

    In fiscal year (FY) 1995 the forecast process used at Hanford to project future solid waste volumes was evaluated. Data on current and future solid waste generation are used by Hanford site planners to determine near-term and long-term planning needs. Generators who plan to ship their waste to Hanford's Solid Waste Program for treatment, storage, and disposal provide volume information on the types of waste that could be potentially generated, waste characteristics, and container types. Generators also provide limited radionuclide data and supporting assumptions. A self-assessment of the forecast process identified many effective working elements, including a well-established and systematic process for data collection, analysis and reporting; sufficient resources to obtain the necessary information; and dedicated support and analytic staff. Several areas for improvement were identified, including the need to improve confidence in the forecast data, integrate forecast data with other site-level and national data calls, enhance the electronic data collection system, and streamline the forecast process

  10. Improving the relevance and efficiency of human exposure assessments within the process of regulatory risk assessment.

    Science.gov (United States)

    Money, Chris

    2018-01-24

    The process for undertaking exposure assessments varies dependent on its purpose. But for exposure assessments to be relevant and accurate, they are reliant on access to reliable information on key exposure determinants. Acquiring such information is seldom straightforward and can take significant time and resources. This articles examines how the application of tiered and targeted approaches to information acquisition, within the context of European human health risk assessments, can not only lead to improvements in the efficiency and effectiveness of the process but also in the confidence of stakeholders in its outputs. The article explores how the benefits might be further improved through the coordination of such activities, as well as those areas that represent barriers to wider international harmonisation.

  11. Safety Assessment of a New Pigmented Safflower Seed Coat (A82 by a Feeding Study on Rat

    Directory of Open Access Journals (Sweden)

    Soraya Karami

    2017-10-01

    Full Text Available ABSTRACT Safflower (Carthamus tinctorius L. is an annual herbaceous plant, cultivated mainly for the seed which is used for edible oil extraction and bird feeding. This study was designed to evaluate the safety of a new pigmented variety of safflower (A82 seeds. The results showed that oral administration of A82 seeds significantly increased the body weight of male rats in a dose-dependent manner (p<0.05. Biochemical tests showed that A82 seeds significantly increased the serum levels of AST (Aspartate aminotransferase (p<0.05, slightly reduced the serum levels of ALT (Alanine aminotransferase and significantly reduced ALP (p<0.05 levels in a dose dependent manner. BUN (Blood Urea Nitrogen and Cr (Creatinine were not significantly changed in A82 seed treated groups. Also, testosterone levels were not significantly changed by administration of different doses of A82. However, Johnson scoring showed slightly decrease in experimental groups. No organ weight or histological changes were observed in liver, kidney, spleen, heart and brain of A82 seed treated animals. These results indicate that A82 seeds have not any toxic effects in Wistar rats. Future studies are required to clarify the exact mechanism by which A82 seeds alter AST levels and body weight in rat.

  12. Assessing the Food Safety Attitudes and Awareness of Managers of School Feeding Programmes in Mpumalanga, South Africa.

    Science.gov (United States)

    Sibanyoni, J J; Tabit, F T

    2017-08-01

    The managers of school feeding programmes are responsible for ensuring the safety of the food which is provided to schoolchildren, but very few studies have been conducted on the food safety knowledge and awareness of these managers. The objective of this study is to evaluate the food safety attitudes and awareness of managers of the National School Nutrition Programme (NSNP) in schools in Mpumalanga, a province of South Africa. A cross-sectional survey study was conducted in which questionnaires were used to collect data from 300 NSNP food service managers. The majority of schools offering NSNP meals were located in informal settlements and most were found to lack basic resources such as electricity (power supplies to the food preparation facility) and potable tap water in their kitchens. No school was found to have implemented the hazard analysis and critical control points (HACCP) programme, and only a few staff had received food safety training. Food safety implementation is worst in informal schools in rural areas due to limited resources and infrastructure. The NSNP food service managers in some schools-especially those located in rural settlements-were found to have little knowledge and awareness of HACCP. These results indicate an urgent need to provide NSNP managers with food safety training and resources (potable water supplies, electricity, dedicated food preparation facilities), particularly in schools in rural settlements.

  13. A Mock UF6 Feed and Withdrawal System for Testing Safeguards Monitoring Systems and Strategies Intended for Nuclear Fuel Enrichment and Processing Plants

    International Nuclear Information System (INIS)

    Krichinsky, Alan M.; Bates, Bruce E.; Chesser, Joel B.; Koo, Sinsze; Whitaker, J. Michael

    2009-01-01

    This report describes an engineering-scale, mock UF6 feed and withdrawal (F and W) system, its operation, and its intended uses. This system has been assembled to provide a test bed for evaluating and demonstrating new methodologies that can be used in remote, unattended, continuous monitoring of nuclear material process operations. These measures are being investigated to provide independent inspectors improved assurance that operations are being conducted within declared parameters, and to increase the overall effectiveness of safeguarding nuclear material. Testing applicable technologies on a mock F and W system, which uses water as a surrogate for UF6, enables thorough and cost-effective investigation of hardware, software, and operational strategies before their direct installation in an industrial nuclear material processing environment. Electronic scales used for continuous load-cell monitoring also are described as part of the basic mock F and W system description. Continuous monitoring components on the mock F and W system are linked to a data aggregation computer by a local network, which also is depicted. Data collection and storage systems are described only briefly in this report. The mock UF 6 F and W system is economical to operate. It uses a simple process involving only a surge tank between feed tanks and product and withdrawal (or waste) tanks. The system uses water as the transfer fluid, thereby avoiding the use of hazardous UF 6 . The system is not tethered to an operating industrial process involving nuclear materials, thereby allowing scenarios (e.g., material diversion) that cannot be conducted otherwise. These features facilitate conducting experiments that yield meaningful results with a minimum of expenditure and quick turnaround time. Technologies demonstrated on the engineering-scale system lead to field trials (described briefly in this report) for determining implementation issues and performance of the monitoring technologies under

  14. Influence of Uranium and Polivinyl Alcohol Concentration in the Feed of Sol Gel Process on the Gel Spherical Product

    International Nuclear Information System (INIS)

    Indra Suryawan; Endang Susiantini

    2007-01-01

    The gel particles have been made at various uranium and polyvinyl alcohol concentration in the sol gel process. The variables of uranium concentration were 0.3; 0.5; 0.7; 0.9; 1.1; 1.3; 1.5; 1.7; 1.9 and 2.1 M The variables of polyvinyl alcohol concentration were 0.3; 0.6; 0.9; 1.2; 1.5; 1.8; 2.1 and 2.4 M After drying the sol gel process products were heated at 300, 500 and 750°C during 4 hours. The gel particles were characterized using an optic microscope to know the shape and condition morphology of gel. From experimental result using uranium concentration of 0.3 until 2.1 M and polyvinyl alcohol of 1.8 until 2.4 M spherical and gel was formed elastic, after heating at 750°C it was unbreakable. At the concentration of polyvinyl alcohol from 0.3 to 0.5 M, the gel product was soft and broken after being dried. At the concentration of polyvinyl alcohol from 0.6 to 0.8 M, the dried gel product was not perfect. At the concentration of polyvinyl alcohol from 0.9 to 1.7 M, the gel product of gelation process was spherical and it was broken after being heated up to 300°C. (author)

  15. assessment of environmental impacts in comfortable furniture production process using life cycle assessment (LCA technique

    Directory of Open Access Journals (Sweden)

    hejhar abbasi

    2016-12-01

    Full Text Available Furniture industry releases annually a large amount of volatile organic compound to the environment due to the use of adhesives, textiles, paints and coating materials. There are some different methods to measure the load of pollutions and the environmental impacts. Life cycle assessment (LCA is one of the best techniques. LCA is a technique in which all environmental impacts related to a product assessed all over its life cycle, from cradle to grave, and ultimately can be used to improve the production process and to prevent unsuitable environmental impacts. In summary, it can be concluded that the use of this technique is the basis for sustainable development and improving social, economic, and environmental indices. This study focused on the collecting of a comprehensive life cycle inventory data for comfortable furniture in two different production processes (B1 and B2 located in Tehran province, and analyzed the environmental impacts during the production process as gate to gate investigation. The results revealed that emissions in production process B1 were higher than that of production process B2. The reason for this is that basic operations such as sawing and frame assembling along with final operation have been done in the same unit for case B1. Textile production and usage, and polyurethane foam were identified as the main hotspots, respectively. Moreover, the results showed that comfortable furniture production process has the highest effects on ecosystem quality, human health, and resources (fossil fuels and mines, respectively.

  16. Environmental vulnerability assessment using Grey Analytic Hierarchy Process based model

    International Nuclear Information System (INIS)

    Sahoo, Satiprasad; Dhar, Anirban; Kar, Amlanjyoti

    2016-01-01

    Environmental management of an area describes a policy for its systematic and sustainable environmental protection. In the present study, regional environmental vulnerability assessment in Hirakud command area of Odisha, India is envisaged based on Grey Analytic Hierarchy Process method (Grey–AHP) using integrated remote sensing (RS) and geographic information system (GIS) techniques. Grey–AHP combines the advantages of classical analytic hierarchy process (AHP) and grey clustering method for accurate estimation of weight coefficients. It is a new method for environmental vulnerability assessment. Environmental vulnerability index (EVI) uses natural, environmental and human impact related factors, e.g., soil, geology, elevation, slope, rainfall, temperature, wind speed, normalized difference vegetation index, drainage density, crop intensity, agricultural DRASTIC value, population density and road density. EVI map has been classified into four environmental vulnerability zones (EVZs) namely: ‘low’, ‘moderate’ ‘high’, and ‘extreme’ encompassing 17.87%, 44.44%, 27.81% and 9.88% of the study area, respectively. EVI map indicates that the northern part of the study area is more vulnerable from an environmental point of view. EVI map shows close correlation with elevation. Effectiveness of the zone classification is evaluated by using grey clustering method. General effectiveness is in between “better” and “common classes”. This analysis demonstrates the potential applicability of the methodology. - Highlights: • Environmental vulnerability zone identification based on Grey Analytic Hierarchy Process (AHP) • The effectiveness evaluation by means of a grey clustering method with support from AHP • Use of grey approach eliminates the excessive dependency on the experience of experts.

  17. Environmental vulnerability assessment using Grey Analytic Hierarchy Process based model

    Energy Technology Data Exchange (ETDEWEB)

    Sahoo, Satiprasad [School of Water Resources, Indian Institute of Technology Kharagpur (India); Dhar, Anirban, E-mail: anirban.dhar@gmail.com [Department of Civil Engineering, Indian Institute of Technology Kharagpur (India); Kar, Amlanjyoti [Central Ground Water Board, Bhujal Bhawan, Faridabad, Haryana (India)

    2016-01-15

    Environmental management of an area describes a policy for its systematic and sustainable environmental protection. In the present study, regional environmental vulnerability assessment in Hirakud command area of Odisha, India is envisaged based on Grey Analytic Hierarchy Process method (Grey–AHP) using integrated remote sensing (RS) and geographic information system (GIS) techniques. Grey–AHP combines the advantages of classical analytic hierarchy process (AHP) and grey clustering method for accurate estimation of weight coefficients. It is a new method for environmental vulnerability assessment. Environmental vulnerability index (EVI) uses natural, environmental and human impact related factors, e.g., soil, geology, elevation, slope, rainfall, temperature, wind speed, normalized difference vegetation index, drainage density, crop intensity, agricultural DRASTIC value, population density and road density. EVI map has been classified into four environmental vulnerability zones (EVZs) namely: ‘low’, ‘moderate’ ‘high’, and ‘extreme’ encompassing 17.87%, 44.44%, 27.81% and 9.88% of the study area, respectively. EVI map indicates that the northern part of the study area is more vulnerable from an environmental point of view. EVI map shows close correlation with elevation. Effectiveness of the zone classification is evaluated by using grey clustering method. General effectiveness is in between “better” and “common classes”. This analysis demonstrates the potential applicability of the methodology. - Highlights: • Environmental vulnerability zone identification based on Grey Analytic Hierarchy Process (AHP) • The effectiveness evaluation by means of a grey clustering method with support from AHP • Use of grey approach eliminates the excessive dependency on the experience of experts.

  18. Effect of air-temperature and diet composition on the drying process of pellets for japanese abalone (Haliotis discus hannai feeding

    Directory of Open Access Journals (Sweden)

    Antonio Vega-Gálvez

    2011-09-01

    Full Text Available The aim of this research was to study the effect of air-temperature and diet composition on the mass transfer kinetics during the drying process of pellets used for Japanese Abalone (Haliotis discus hannai feeding. In the experimental design, three temperatures were used for convective drying, as well as three different diet compositions (Diets A, B and C, in which the amount of fishmeal, spirulin, algae, fish oil and cornstarch varied. The water diffusion coefficient of the pellets was determined using the equation of Fick's second law, which resulted in values between 0.84-1.94×10-10 m²/s. The drying kinetics was modeled using Page, Modified Page, Root of time, Exponential, Logarithmic, Two-Terms, Modified Henderson-Pabis and Weibull models. In addition, two new models, referred to as 'Proposed' models 1 and 2, were used to simulate this process. According to the statistical tests applied, the models that best fitted the experimental data were Modified Henderson-Pabis, Weibull and Proposed model 2, respectively. Bifactorial analysis of variance ANOVA showed that Diet A (fishmeal 44%, spirulin 9%, fish oil 1% and cornstarch 36% presented the highest diffusion coefficient values, which were favored by the temperature increase in the drying process.

  19. Toward Sustainable Anticipatory Governance: Analyzing and Assessing Nanotechnology Innovation Processes

    Science.gov (United States)

    Foley, Rider Williams

    Cities around the globe struggle with socio-economic disparities, resource inefficiency, environmental contamination, and quality-of-life challenges. Technological innovation, as one prominent approach to problem solving, promises to address these challenges; yet, introducing new technologies, such as nanotechnology, into society and cities has often resulted in negative consequences. Recent research has conceptually linked anticipatory governance and sustainability science: to understand the role of technology in complex problems our societies face; to anticipate negative consequences of technological innovation; and to promote long-term oriented and responsible governance of technologies. This dissertation advances this link conceptually and empirically, focusing on nanotechnology and urban sustainability challenges. The guiding question for this dissertation research is: How can nanotechnology be innovated and governed in responsible ways and with sustainable outcomes? The dissertation: analyzes the nanotechnology innovation process from an actor- and activities-oriented perspective (Chapter 2); assesses this innovation process from a comprehensive perspective on sustainable governance (Chapter 3); constructs a small set of future scenarios to consider future implications of different nanotechnology governance models (Chapter 4); and appraises the amenability of sustainability problems to nanotechnological interventions (Chapter 5). The four studies are based on data collected through literature review, document analysis, participant observation, interviews, workshops, and walking audits, as part of process analysis, scenario construction, and technology assessment. Research was conducted in collaboration with representatives from industry, government agencies, and civic organizations. The empirical parts of the four studies focus on Metropolitan Phoenix. Findings suggest that: predefined mandates and economic goals dominate the nanotechnology innovation process

  20. A Preliminary Assessment of HTST Processing on Donkey Milk

    Science.gov (United States)

    Antoniazzi, Sara; Gariglio, Gian Marco; Coscia, Alessandra; Bertino, Enrico; Cavallarin, Laura

    2017-01-01

    Due to increasing attention from consumers on non-bovine milk types, and to the increase in the number of small dairy donkey farms in Italy, farmers require more advanced and reliable processing devices, in order to guarantee a safe product of high quality. To this aim, a new small-scale High-Temperature Short-Time (HTST) pasteurizer (72 °C for 15 s), prototyped by the authors, was tested on donkey milk. The efficacy of the HTST device was tested on raw donkey milk microflora by enumeration of total aerobic bacteria, Enterobacteriaceae and Bacillus cereus. The biochemical quality was assessed by determining the protein profile by monodimensional electrophoresis and by measuring lysozyme activity. The HTST apparatus was able to reduce the total bacteria count, and to completely eradicate Enterobacteriaceae. Bacillus cereus, when present, was decreased with low efficiency. Changes in the protein profile were observed in milk pasteurized in accordance with both processes, although HTST seemed to limit casein degradation. Lysozyme activity was not substantially affected in comparison to raw donkey milk. In conclusion, a tailored small-volume HTST device could be safely applied to pasteurize donkey milk in on-farm pasteurization processes on small dairy donkey farms. PMID:29056708

  1. A Preliminary Assessment of HTST Processing on Donkey Milk.

    Science.gov (United States)

    Giribaldi, Marzia; Antoniazzi, Sara; Gariglio, Gian Marco; Coscia, Alessandra; Bertino, Enrico; Cavallarin, Laura

    2017-10-09

    Due to increasing attention from consumers on non-bovine milk types, and to the increase in the number of small dairy donkey farms in Italy, farmers require more advanced and reliable processing devices, in order to guarantee a safe product of high quality. To this aim, a new small-scale High-Temperature Short-Time (HTST) pasteurizer (72 °C for 15 s), prototyped by the authors, was tested on donkey milk. The efficacy of the HTST device was tested on raw donkey milk microflora by enumeration of total aerobic bacteria, Enterobacteriaceae and Bacillus cereus. The biochemical quality was assessed by determining the protein profile by monodimensional electrophoresis and by measuring lysozyme activity. The HTST apparatus was able to reduce the total bacteria count, and to completely eradicate Enterobacteriaceae. Bacillus cereus, when present, was decreased with low efficiency. Changes in the protein profile were observed in milk pasteurized in accordance with both processes, although HTST seemed to limit casein degradation. Lysozyme activity was not substantially affected in comparison to raw donkey milk. In conclusion, a tailored small-volume HTST device could be safely applied to pasteurize donkey milk in on-farm pasteurization processes on small dairy donkey farms.

  2. A Preliminary Assessment of HTST Processing on Donkey Milk

    Directory of Open Access Journals (Sweden)

    Marzia Giribaldi

    2017-10-01

    Full Text Available Due to increasing attention from consumers on non-bovine milk types, and to the increase in the number of small dairy donkey farms in Italy, farmers require more advanced and reliable processing devices, in order to guarantee a safe product of high quality. To this aim, a new small-scale High-Temperature Short-Time (HTST pasteurizer (72 °C for 15 s, prototyped by the authors, was tested on donkey milk. The efficacy of the HTST device was tested on raw donkey milk microflora by enumeration of total aerobic bacteria, Enterobacteriaceae and Bacillus cereus. The biochemical quality was assessed by determining the protein profile by monodimensional electrophoresis and by measuring lysozyme activity. The HTST apparatus was able to reduce the total bacteria count, and to completely eradicate Enterobacteriaceae. Bacillus cereus, when present, was decreased with low efficiency. Changes in the protein profile were observed in milk pasteurized in accordance with both processes, although HTST seemed to limit casein degradation. Lysozyme activity was not substantially affected in comparison to raw donkey milk. In conclusion, a tailored small-volume HTST device could be safely applied to pasteurize donkey milk in on-farm pasteurization processes on small dairy donkey farms.

  3. Framework for Sustainability Performance Assessment for Manufacturing Processes- A Review

    Science.gov (United States)

    Singh, K.; Sultan, I.

    2017-07-01

    Manufacturing industries are facing tough competition due to increasing raw material cost and depleting natural resources. There is great pressure on the industry to produce environmental friendly products using environmental friendly processes. To address these issues modern manufacturing industries are focusing on sustainable manufacturing. To develop more sustainable societies, industries need to better understand how to respond to environmental, economic and social challenges. This paper proposed some framework and tools that accelerate the transition towards a sustainable system. The developed framework will be beneficial for sustainability assessment comparing different plans alongside material properties, ultimately helping the manufacturing industries to reduce the carbon emissions and material waste, besides improving energy efficiency. It is expected that this would be highly beneficial for determination of environmental impact of a process at early design stages. Therefore, it would greatly help the manufacturing industries for selection of process plan based on sustainable indices. Overall objective of this paper would have good impact on reducing air emissions and protecting environment. We expect this work to contribute to the development of a standard reference methodology to help further sustainability in the manufacturing sector.

  4. EMG Processing Based Measures of Fatigue Assessment during Manual Lifting

    Directory of Open Access Journals (Sweden)

    E. F. Shair

    2017-01-01

    Full Text Available Manual lifting is one of the common practices used in the industries to transport or move objects to a desired place. Nowadays, even though mechanized equipment is widely available, manual lifting is still considered as an essential way to perform material handling task. Improper lifting strategies may contribute to musculoskeletal disorders (MSDs, where overexertion contributes as the highest factor. To overcome this problem, electromyography (EMG signal is used to monitor the workers’ muscle condition and to find maximum lifting load, lifting height and number of repetitions that the workers are able to handle before experiencing fatigue to avoid overexertion. Past researchers have introduced several EMG processing techniques and different EMG features that represent fatigue indices in time, frequency, and time-frequency domain. The impact of EMG processing based measures in fatigue assessment during manual lifting are reviewed in this paper. It is believed that this paper will greatly benefit researchers who need a bird’s eye view of the biosignal processing which are currently available, thus determining the best possible techniques for lifting applications.

  5. EMG Processing Based Measures of Fatigue Assessment during Manual Lifting

    Science.gov (United States)

    Marhaban, M. H.; Abdullah, A. R.

    2017-01-01

    Manual lifting is one of the common practices used in the industries to transport or move objects to a desired place. Nowadays, even though mechanized equipment is widely available, manual lifting is still considered as an essential way to perform material handling task. Improper lifting strategies may contribute to musculoskeletal disorders (MSDs), where overexertion contributes as the highest factor. To overcome this problem, electromyography (EMG) signal is used to monitor the workers' muscle condition and to find maximum lifting load, lifting height and number of repetitions that the workers are able to handle before experiencing fatigue to avoid overexertion. Past researchers have introduced several EMG processing techniques and different EMG features that represent fatigue indices in time, frequency, and time-frequency domain. The impact of EMG processing based measures in fatigue assessment during manual lifting are reviewed in this paper. It is believed that this paper will greatly benefit researchers who need a bird's eye view of the biosignal processing which are currently available, thus determining the best possible techniques for lifting applications. PMID:28303251

  6. New EU legislation for risk assessment of GM food: no scientific justification for mandatory animal feeding trials.

    Science.gov (United States)

    Kuiper, Harry A; Kok, Esther J; Davies, Howard V

    2013-09-01

    This commentary focuses on the potential added value of and need for (sub)-chronic testing of whole genetically modified (GM) foods in rodents to assess their safety. Such routine testing should not be required since, due to apparent weaknesses in the approach, it does not add to current risk assessment of GM foods. Moreover, the demand for routine testing using animals is in conflict with the European Union (EU) Commission's efforts to reduce animal experimentation. Regulating agencies in the EU are invited to respect the sound scientific principles applied to the risk assessment of foods derived from GM plants and not to interfere in the risk assessment by introducing extra requirements based on pseudo-scientific or political considerations. © 2013 Society for Experimental Biology, Association of Applied Biologists and John Wiley & Sons Ltd.

  7. Comparative assessment of TRU waste forms and processes. Volume I. Waste form and process evaluations

    International Nuclear Information System (INIS)

    Ross, W.A.; Lokken, R.O.; May, R.P.; Roberts, F.P.; Timmerman, C.L.; Treat, R.L.; Westsik, J.H. Jr.

    1982-09-01

    This study provides an assesses seven waste forms and eight processes for immobilizing transuranic (TRU) wastes. The waste forms considered are cast cement, cold-pressed cement, FUETAP (formed under elevated temperature and pressure) cement, borosilicate glass, aluminosilicate glass, basalt glass-ceramic, and cold-pressed and sintered silicate ceramic. The waste-immobilization processes considered are in-can glass melting, joule-heated glass melting, glass marble forming, cement casting, cement cold-pressing, FUETAP cement processing, ceramic cold-pressing and sintering, basalt glass-ceramic processing. Properties considered included gas generation, chemical durability, mechanical strength, thermal stability, and radiation stability. The ceramic products demonstrated the best properties, except for plutonium release during leaching. The glass and ceramic products had similar properties. The cement products generally had poorer properties than the other forms, except for plutonium release during leaching. Calculations of the Pu release indicated that the waste forms met the proposed NRC release rate limit of 1 part in 10 5 per year in most test conditions. The cast-cement process had the lowest processing cost, followed closely by the cold-pressed and FUETAP cement processes. Joule-heated glass melting had the lower cost of the glass processes. In-can melting in a high-quality canister had the highest cost, and cold-pressed and sintered ceramic the second highest. Labor and canister costs for in-can melting were identified. The major contributor to costs of disposing of TRU wastes in a defense waste repository is waste processing costs. Repository costs could become the dominant cost for disposing of TRU wastes in a commercial repository. It is recommended that cast and FUETAP cement and borosilicate glass waste-form systems be considered. 13 figures, 16 tables

  8. Performance assessment of a data processing chain for THz imaging

    Science.gov (United States)

    Catapano, Ilaria; Ludeno, Giovanni; Soldovieri, Francesco

    2017-04-01

    first peak of the measured waveforms by exploiting the a-priori information on the focus distance at which the specimen under test must be located during the measurement phase. The usefulness of the proposed data processing chain has been widely assessed in the last few months by surveying several specimens made by different materials and representative of objects of interest for civil engineering and cultural heritage diagnostics. At the conference, we will show in detail the signal processing chain and present several achieved results. REFERENCES [1] I. Catapano, F. Soldovieri, "A Data Processing Chain for Terahertz Imaging and Its Use in Artwork Diagnostics". J Infrared Milli Terahz Waves, pp.13, Nov. 2016. [2] M. Bertero and P. Boccacci (1998), Introduction to Inverse Problems in Imaging, Bristol: Institute of Physics Publishing.

  9. Investment process financing in Russian business: assessment, trends, problems

    Directory of Open Access Journals (Sweden)

    Lyudmila Aleksandrovna Kormishkina

    2014-07-01

    Full Text Available In modern conditions the provision of investment process financing is the most important task of state economic policy aimed at achieving sustainable growth and dynamic development of the Russian economy in general. This problem solution requires further theoretical consideration and development of appropriate methodological, methodical and practical recommendations. Financing of investment activity development should be based on the systemic approach, which considers this process as an element of the financial support system of the state innovation development. It is necessary to conduct research in order to expand the financial component of this support, encourage the investment process development, enhance financial relations in the sphere of forming and using the intellectual property objects and develop a complex of measures to study the innovations implementation possibilities. Although economic science pays a lot of attention to various aspects of the issue, there is currently no research work, devoted to the study of sources of the investment process financing. Development of methodical and practical recommendations to establish the system of its financing, taking into account modern world economic trends is required. The authors have revealed the enterprises’ general economic profit while promoting sustainable economic growth by means of provision of financial resources for it. The closeness of the relationship is calculated on the basis of regression models that characterize the sectoral distribution of gross profit. The correlation-regression analysis has helped to assess the influence of the main sources of the RF fixed assets on the investment index. The economic nature of the sources determines its value and dynamics

  10. Time-variant reliability assessment through equivalent stochastic process transformation

    International Nuclear Information System (INIS)

    Wang, Zequn; Chen, Wei

    2016-01-01

    Time-variant reliability measures the probability that an engineering system successfully performs intended functions over a certain period of time under various sources of uncertainty. In practice, it is computationally prohibitive to propagate uncertainty in time-variant reliability assessment based on expensive or complex numerical models. This paper presents an equivalent stochastic process transformation approach for cost-effective prediction of reliability deterioration over the life cycle of an engineering system. To reduce the high dimensionality, a time-independent reliability model is developed by translating random processes and time parameters into random parameters in order to equivalently cover all potential failures that may occur during the time interval of interest. With the time-independent reliability model, an instantaneous failure surface is attained by using a Kriging-based surrogate model to identify all potential failure events. To enhance the efficacy of failure surface identification, a maximum confidence enhancement method is utilized to update the Kriging model sequentially. Then, the time-variant reliability is approximated using Monte Carlo simulations of the Kriging model where system failures over a time interval are predicted by the instantaneous failure surface. The results of two case studies demonstrate that the proposed approach is able to accurately predict the time evolution of system reliability while requiring much less computational efforts compared with the existing analytical approach. - Highlights: • Developed a new approach for time-variant reliability analysis. • Proposed a novel stochastic process transformation procedure to reduce the dimensionality. • Employed Kriging models with confidence-based adaptive sampling scheme to enhance computational efficiency. • The approach is effective for handling random process in time-variant reliability analysis. • Two case studies are used to demonstrate the efficacy

  11. ASSESSMENT OF THE HEALTH STATUS OF PRIMARY SCHOOL CHILDREN PARTICIPATING IN SCHOOL FEEDING PROGRAM IN NUSA TENGGARA BARAT AND NUSA TENGGARA TIMUR, INDONESIA

    Directory of Open Access Journals (Sweden)

    Dwi Susilowati

    2012-11-01

    Full Text Available Background: School feeding program provided vital nourishment for students, improved their health and school attendance. Objective: To investigate the effects of provision of food distributed at targeted primary schools. To measure the change of anemia prevalence rate, to assess the prevalence of some illness and to assess related knowledge and practices of health, nutrition and hygiene among primary school students. Methods: The sample was randomly selected from 30 clusters of primary schools who received WFP food supplement for at least 6 months in Nusa Tenggara Barat (NTB and Nusa Tenggara Timur (NTT provinces during the year 2008. The sample was calculated on the basis of the formula of a single cross-sectional survey comparing two sub-groups. The data was analyzed by using SPSS for Windows version 15. Results: The head of households, whom mostly males, worked as unskilled agricultural wage labors and vendor of agricultural products. The education of parents was generally low. Most of them lived in single house and used latrine. The mean hemoglobin of students was 11.8 gr/dl (SO 1.3; Cl (11 .7-11.9. The anemia prevalence rate was 37 6%, it was 25.8% higher as compared to previous year. There were significant decreased of morbidity rates of diarrhea, Acute Respiratory lnfection and fever as compared to previous years. Practice in hygiene as indicated by drinking boiled water showed a decreased m coverage in the previous years. However, hand washing before meals was increased steadily while hand washing after defecation was decreased. There were more household used latrines.Key words: school feeding, primary school children, anemia, knowledge attitude and practice

  12. Responsive versus scheduled feeding for preterm infants

    OpenAIRE

    Watson, Julie; McGuire, William

    2016-01-01

    Version 5\\ud Background\\ud \\ud Feeding preterm infants in response to their hunger and satiation cues (responsive, cue-based, or infant-led feeding) rather than at scheduled intervals might enhance infants' and parents' experience and satisfaction, help in the establishment of independent oral feeding, increase nutrient intake and growth rates, and allow earlier hospital discharge.\\ud \\ud \\ud Objectives\\ud \\ud To assess the effect of a policy of feeding preterm infants on a responsive basis v...

  13. The process of clinical assessment: cognitions of the evaluator

    Directory of Open Access Journals (Sweden)

    Carmelo Ibáñez Aguirre

    2013-08-01

    Full Text Available The cognitive paradigm of the past few decades opens several new possibilities for psychological evaluation.  The objective of this essay is to emphasize the possibilities related to the quality of self-evaluation, specifically professional self-assessment, meaning a critical analysis of one’s own evaluation process. In this essay, metacognition activities and strategies are examined, as are the ways in which these activities and strategies relate to metacognition and cognitive skills. The intent of this theoretical essay is to offer answers to the clinical evaluator’s professional experience. The results indicate that the clinical professional must consider strategies to improve metacognition and cognitive skills through reflection, self-analysis and self-criticism to improve the quality and efficiency of their work.

  14. Environmental assessment for radioisotope heat source fuel processing and fabrication

    International Nuclear Information System (INIS)

    1991-07-01

    DOE has prepared an Environmental Assessment (EA) for radioisotope heat source fuel processing and fabrication involving existing facilities at the Savannah River Site (SRS) near Aiken, South Carolina and the Los Alamos National Laboratory (LANL) near Los Alamos, New Mexico. The proposed action is needed to provide Radioisotope Thermoelectric Generators (RTG) to support the National Aeronautics and Space Administration's (NASA) CRAF and Cassini Missions. Based on the analysis in the EA, DOE has determined that the proposed action does not constitute a major Federal action significantly affecting the quality of the human environment within the meaning of the National Environmental Policy Act (NEPA) of 1969. Therefore, an Environmental Impact Statement is not required. 30 refs., 5 figs

  15. Nitrogen removal on recycling water process of wastewater treatment plant effluent using subsurface horizontal wetland with continuous feed

    Science.gov (United States)

    Tazkiaturrizki, T.; Soewondo, P.; Handajani, M.

    2018-01-01

    Recycling water is a generic term for water reclamation and reuse to solve the scarcity of water. Constructed wetlands have been recognized as providing many benefits for wastewater treatment including water supply and control by recycling water. This research aims to find the best condition to significantly remove nitrogen using constructed wetland for recycling water of Bojongsoang Waste Water Treatment Plan (WWTP) effluent. Using media of soil, sand, gravel, and vegetation (Typha latifolia and Scirpus grossus) with an aeration system, BOD and COD parameters have been remarkably reduced. On the contrary, the removal efficiency for nitrogen is only between 50-60%. Modifications were then conducted by three step of treatment, i.e., Step I is to remove BOD/COD using Typha latifolia with an aeration system, Step II is todecrease nitrogen using Scirpus grossus with/without aeration, and Step III isto complete the nitrogen removal with denitrification process by Glycine max without aeration. Results of the research show that the nitrogen removal has been successfully increased to a high efficiency between 80-99%. The combination of aeration system and vegetation greatly affects the nitrogen removal. The vegetation acts as the organic nitrogen consumer (plant uptake) for amino acids, nitrate, and ammonium as nutrition, as well as theoxygen supplier to the roots so that aerobic microsites are formed for ammonification microorganisms.

  16. Risk assessment of mitigated domino scenarios in process facilities

    International Nuclear Information System (INIS)

    Landucci, Gabriele; Necci, Amos; Antonioni, Giacomo; Argenti, Francesca; Cozzani, Valerio

    2017-01-01

    The propagation of accidents among process units may lead to severe cascading events or domino effects with catastrophic consequences. Prevention, mitigation and management of domino scenarios is of utmost importance and may be achieved in industrial facilities through the adoption of multiple safety layers. The present study was aimed at developing an innovative methodology to address the quantitative risk assessment (QRA) of domino scenarios accounting for the presence and role of safety barriers. Based on the expected performance of safety barriers, a dedicated event tree analysis allowed the identification and the assessment of the frequencies of the different end-point events deriving from unmitigated and partially mitigated domino chains. Specific criteria were introduced in consequence analysis to consider the mitigation effects of end-point scenarios deriving from safety barriers. Individual and societal risk indexes were calculated accounting for safety barriers and the mitigated scenarios that may result from their actions. The application of the methodology to case-studies of industrial interest proved the importance of introducing a specific systematic and quantitative analysis of safety barrier performance when addressing escalation leading to domino effect. - Highlights: • A methodology was developed to account for safety barrier performance in escalation prevention. • The methodology allows quantitative assessment accounting for safety barrier performance. • A detailed analysis of transient mitigated scenarios is allowed by the developed procedure. • The procedure allows accounting for safety barrier performance in QRA of domino scenarios. • An important reduction in the risk due to domino scenarios is evidenced when considering safety barriers.

  17. Environmental assessment of different solar driven advanced oxidation processes

    Energy Technology Data Exchange (ETDEWEB)

    Munoz, Ivan; Rieradevall, Joan [Institut de Ciencia i Tecnologia Ambientals (ICTA), Universitat Autonoma de Barcelona, 08193 Bellaterra (Barcelona) (Spain); Torrades, Francesc [Departament d' Enginyeria Quimica, ETSEI de Terrassa, Universitat Politecnica de Catalunya, 08222 Terrassa (Barcelona) (Spain); Peral, Jose; Domenech, Xavier [Departament de Quimica, Universitat Autonoma de Barcelona, 08193 Bellaterra (Barcelona) (Spain)

    2005-10-01

    In this work a comparative environmental assessment of different advanced oxidation processes (AOP's) is performed. Two energy scenarios have been considered according to the energy source used: solar energy and electricity (UVA lamp). A life cycle assessment (LCA) is carried out in order to quantify the environmental impacts of the AOP's. The treatments considered are heterogenous photocatalysis, photo-Fenton reactions, the coupling of heterogeneous photocatalysis and photo-Fenton, and heterogeneous photocatalysis in combination with hydrogen peroxide. These AOP's are applied to the treatment of kraft mill bleaching wastewaters. The system under study includes the production of the catalysts, reagents as well as the production of electricity; eight environmental impact categories are assessed for each AOP: global warming, ozone depletion, aquatic eutrophication, acidification, human toxicity, freshwater aquatic toxicity, photochemical ozone formation, and abiotic resource depletion. the results of the LCA show that the environmental impact of AOP's is caused mainly by the amount of electricity consumed, whereas the impact of producing the reagents and catalysts is comparatively low. For this reason, the solar energy scenario reduces the impact more than 90% for almost all AOP's and impact categories. None of the solar driven AOP's can be identified as the best in all impact categories, but heterogenous photocatalysis and photo-Fenton reactions obtain better results than the remaining treatments, since these treatments do not consume simultaneously both TiO{sub 2} and H{sub 2}O{sub 2}, the chemicals with highe