AUTOMATION OF IN FEED CENTERLESS GRINDING MACHINE

OpenAIRE

Piyusha P. Jadhav*, Sachin V. Lomte, Sudhir Surve

2017-01-01

In-feed centerless grinding technique offers a major contribution to the industries. This is the alternative in-feed centerless grinding technique using regulating wheel. Mainly centerless grinding is divided in three types, and those are End feed, in-feed and through feed Centerless grinding. This paper mainly deals with low cost automation on in-feed Centerless grinding machine using regulating wheel suitable for multiple in-feed type jobs. It deals with the development of a Centerless grin...

Work Tasks as Determinants of Grain Dust and Microbial Exposure in the Norwegian Grain and Compound Feed Industry.

Science.gov (United States)

Straumfors, Anne; Heldal, Kari Kulvik; Wouters, Inge M; Eduard, Wijnand

2015-07-01

The grain and compound feed industry entails inevitable risks of exposure to grain dust and its microbial content. The objective of this study was therefore to investigate task-dependent exposure differences in order to create knowledge basis for awareness and exposure reducing measures in the Norwegian grain and compound feed industry. A total of 166 samples of airborne dust were collected by full-shift personal sampling during work in 20 grain elevators and compound feed mills during one autumn season and two winter seasons. The personal exposure to grain dust, endotoxins, β-1→3-glucans, bacteria, and fungal spores was quantified and used as individual outcomes in mixed models with worker nested in company as random effect and different departments and tasks as fixed effects. The exposure levels were highest in grain elevator departments. Exposure to endotoxins was particularly high. Tasks that represented the highest and lowest exposures varied depending on the bioaerosol component. The most important determinants for elevated dust exposure were cleaning and process controlling. Cleaning increased the dust exposure level by a factor of 2.44 of the reference, from 0.65 to 1.58mg m(-3), whereas process controlling increased the dust exposure level by a factor of 2.97, from 0.65 to 1.93mg m(-3). Process controlling was associated with significantly less grain dust exposure in compound feed mills and the combined grain elevators and compound feed mills, than in grain elevators. The exposure was reduced by a factor of 0.18 and 0.22, from 1.93 to 0.34mg m(-3) and to 0.42mg m(-3), respectively, compared with the grain elevators. Inspection/maintenance, cleaning, and grain rotation and emptying were determinants of higher exposure to both endotoxin and β-1→3-glucans. Seed winnowing was in addition a strong determinant for endotoxin, whereas mixing of animal feed implied higher β-1→3-glucan exposure. Cleaning was the only task that contributed significantly to

Energy efficiency in the agricultural and food industry illustrated with the example of the feed production plant

Directory of Open Access Journals (Sweden)

Gembicki Jacek

2016-01-01

Full Text Available Energy efficiency is an indicator specifying the amount of saved electric energy thanks to implementation of suitable systems and solutions aimed at reducing the energy consumption in a production plant. Effective use of electric energy or heat energy is intended to reduce the amount of energy required to manufacture products and provide services. Decreased demand for electric energy in the production plant by only a few percent’s may result in considerable savings which in turn assure increased production profitability. If we reduce the energy consumption, it will translate into reduced pollution generated and emitted to the environment. Thanks to this, the plant may limit its negative impact on the surrounding. The feed industry is known to consume much amount of energy for the purposes of production. This energy is intended for pre-processing of substrates, actual production and preparation of ready product to be taken over by the customer. Farmers use fodders to feed their animals. Quality of fodders (feeds and their ingredients determine health of farm animals, which has a direct impact on the quality of products we consume, and consequently on our health. An thorough analysis of feed production plants and reduction of their energy consumption should translate into improved effectiveness. Saved energy allows producing high-quality products and using ingredients of higher quality, which in turn may influence competitiveness of prices of ready products.

Recycling of sewage sludge: Feeding Nile tilapia, Oreochromis niloticus (Linn.), with irradiated and dried sludge from beer industry

International Nuclear Information System (INIS)

Chuapoehuk, W.; Piadang, S.; Tinnungwattana, W.

1998-01-01

Recycling of sewage sludge from wastewater treatment plant of beer industry as supplemental feed for fish was conducted. Industrial biosludge from wastewater treatment plant of beer industry was irradiated at 3.32 kGy gamma irradiator, carrier type, model JS 8900, 60 Co activity at 187,088.121 Ci on 6 June 1995. For fish production study, it is needed to change the wet sludge to dry powder form by Rotadics dryer, type Stord TST 3.4 C, Stord (Thailand) Co. Ltd., at the maximum capacity of 15 T/24 h. The moisture content of finished product is at 8-10%. Fish control diet was then replaced at 60% by weight with irradiated and dried sludge to become as test diet. Nile tilapia, Oreochromis niloticus (Linn.), fingerlings averaging 0.67 g. in body weight was stocked into earthern ponds of 400 square meters at the density of 5 fishes per square metre. Fish were fed with two diets, control diet and test diet, for 154 days. There are no statistical differences in specific growth rate, quality of the fish flesh (Cd and Pb concentration, edible portion and off flavour) and pond water quality. Survival rate and feed conversion efficiency of the fish fed test diet are higher than control diet (P<0.05). Replacement of irradiated sludge can decrease the cost of fish production and results in better benefit than that of control diet

Novel feeding strategies for Saccharomyces cerevisiae DS2155 ...

African Journals Online (AJOL)

The dual behavior of Saccharomyces cerevisiae on glucose feed as function of the dilution rate near the critical specific growth rate (ì=0.25) is a bottleneck in industrial production, hence the need for more efficient feeding strategies. In this work novel feeding strategies have been generated and evaluated. For each feeding ...

Maize production in mid hills of Nepal: from food to feed security

Directory of Open Access Journals (Sweden)

Krishna Prasad Timsina

2016-12-01

Full Text Available This study was undertaken in 2016 to analyze the production and utilization of maize in Nepal. Sixty maize growers from Kavre and Lamjung districts were selected using purposive, cluster and simple random sampling techniques. Similarly, six feed industries and five maize experts from Chitwan district were also interviewed. Study shows 56% of the total areas were used for maize production and 50% of the maize areas were covered by hybrid maize. There was no practice of contract maize production. The results revealed that 60%, 25% and 3% of the grain were used for animal feed, food and seed respectively in hill districts. Whereas the remaining amount of the maize (12% was sold to the different buyers. The proportion of maize feed supply to different animals in the study area was varying. Result shows that at least 1.5 million tons of maize is required only to the feed industries affiliated with national feed industry association in Nepal. Similarly, out of total maize used in feed production, 87% of the maize was imported from India each year by feed industries. Analysis shows negative correlation between scale of feed production and use of domestic maize due to unavailability of required quantity of maize in time. The major pre-condition of feed industries for maize buying was moisture content which must be equal or less than 14%. Very little or no inert materials and physical injury, free from fungal attack and bigger size were also the criteria for maize buying. However, some of the feed industries were also thinking about protein and amino acid contents. Result shows 13% and 8.5% increasing demand of poultry feed and animal feed, respectively over the last five year in Nepal. Most likely, maize is known as a means of food security in Nepal, however, in the context of changing utilization patterns at the farm level and also tremendous increasing demand of maize at the industry level suggest to give more focus on development and dissemination of

Determination of the trace TBP in industrial feed liquid by gas chromatography

International Nuclear Information System (INIS)

Gao Yuehua; Jiang Junqing; Mu Ling; Yang Songtao

2012-01-01

The determination of the trace TBP in kerosene of the industrial feed liquid by gas chromatography is studied in the paper. It first takes the purification treatment for the kerosene containing trace TBP. The plutonium is removed by 0.2 mol/L ferrous sulfamate-1 mol/L nitric acid using the back-extraction. The uranium and the nitric acid in the organic phase are removed by the deionized water. The impurity which affect the measurement of the TBP and is harmful to the gas chromatograph are eliminated. Then the content of the TBP of the organic phase can be determined by gas chromatography. Results show that the measuring range of the content of the TBP is 0.02% ∼ 2%. The precision of the method is better than 5% and the recovery is between 95%∼106%. (authors)

Feed in or certificates, competition or complementarity? Combining a static efficiency and a dynamic innovation perspective on the greening of the energy industry

International Nuclear Information System (INIS)

Midttun, Atle; Gautesen, Kristian

2007-01-01

European policy on the greening of the energy industry has been characterised by a debate between proponents of two apparent polar opposites, feed in tariffs and certificate markets. Different European countries have chosen both mechanisms and, as a consequence, the European Union has maintained a fairly pluralist position, abstaining from stricter harmonisation. Taking a dynamic innovation perspective on European energy industry, we argue that feed in tariffs and certificate markets should not be seen as competing alternatives, but rather as complementary regulatory instruments targeting subsequent steps in the product cycle, on the way from early technology-conceptualisation and development towards competitive positioning in mature energy markets. We see both policy instruments as necessary to achieve the extensive transformation towards sustainable development that is judged as important tools in the context of the global climate challenge

Multivariate image analysis for quality inspection in fish feed production

DEFF Research Database (Denmark)

Ljungqvist, Martin Georg

Aquaculture is today one of the fastest growing food producing sectors in the world. Access to good and effective fish feed is a condition for optimised and sustainable aquaculture activity. In the aquaculture industry it is of utmost importance that the fish get feed of proper size and nutrition....... The colour appearance of fish products is important for customers. Salmonid fish get their red colour from a natural pigment called astaxanthin. To ensure a similar red colour of fish in aquaculture astaxanthin is used as an additive coated on the feed pellets. Astaxanthin can either be of natural origin......, or synthesised chemically. Common for both types is that they are relatively expensive in comparison to the other feed ingredients. This thesis investigates multi-variate data collection for visual inspection and optimisation of industrial production in the fish feed industry. Quality parameters focused on here...

The Development of the Renewable Energy Power Industry under Feed-In Tariff and Renewable Portfolio Standard: A Case Study of China’s Photovoltaic Power Industry

Directory of Open Access Journals (Sweden)

Yuzhuo Zhang

2017-03-01

Full Text Available Among the regulatory policies, feed-in tariffs (FIT and renewable portfolio standards (RPS are the most popular to promote the development of renewable energy power industry. They can significantly contribute to the expansion of domestic industrial activities in terms of sustainable energy. In this paper, we synthetically consider various important factors with the analysis of the existing literature, and use system dynamics (SD to establish models of long-term development of the renewable energy power industry under FIT and RPS schemes. The model not only clearly shows the complex logical relationship between the factors but also reveals the process of coordination between the two policy tools in the development of the renewable energy power industry. In addition, as an example of development of renewable energy industry, the paper studies the development of China’s photovoltaic power industry under different scenarios. The models proposed in this paper can provide a reference for scholars to study development of the renewable energy power industry in different countries, thereby facilitating an understanding of the renewable energy power’s long-term sustainable development pattern under FIT and RPS schemes, and helping to provide references for policy-making institutions. The results show that in the perfect competitive market, the implementation of RPS can promote long-term and rapid development of China’s photovoltaic power industry given the constraints and actions of the mechanisms of RPS quota proportion, the TGC valid period, and fines, compared with FIT. At the end of the paper, policy implications are offered as references for the government.

Cross-shift study of exposure-response relationships between bioaerosol exposure and respiratory effects in the Norwegian grain and animal feed production industry

NARCIS (Netherlands)

Straumfors, Anne; Heldal, Kari Kulvik; Eduard, Wijnand; Wouters, Inge M; Ellingsen, Dag G; Skogstad, Marit

2016-01-01

OBJECTIVE: We have studied cross-shift respiratory responses of several individual bioaerosol components of the dust in the grain and feed industry in Norway. METHODS: Cross-shift changes in lung function and nasal congestion, as well as in respiratory and systemic symptoms of 56 exposed workers and

TENDENCIES AND PECULIARITIES OF SHRIMP FEED PRODUCTION

Directory of Open Access Journals (Sweden)

LIUDMYLA V. FIHURSKA

2018-04-01

Full Text Available Aquaculture is food sector, which is growing rapidly in the last 25 years with annual growth rate 8,2 . One of the mostperspective branches of aquaculture is shrimp farming. The cost of feeds is up to 80% of the cost of shrimp breeding, so providingthe industry with high-quality feeds is the important goal of the feed industry in all over the world. The theoretical research was devotedto the task of compound shrimp feed production. In order to satisfy shrimp requirements, shrimp feeding systems were shown.Existing shrimp breeding systems are shown as different from the type of reservoirs (static / running water, indoor or outdoor, feedingmethods, and the species of grown shrimp. Features of the nutritional standards for freshwater and saltwater shrimps were analyzed.Nutrient requirements of shrimp have been changed through shrimp life-cycle. The shrimp life-cycle was shown.World leaders-producers of compound mixed feeds for shrimps were shown. The analysis of pellet size and nutritional valueof compound mixed feeds of crude protein content in prestart, starter, grower and finish periods of cultivation and in accordancewith the system of cultivation and feeding shrimp (intensive, extensive, semi-intensive is carried out. The requirements for the contentof main minerals, vitamins and restrictions to the content of crude fiber are given. Traditional ingredients are described. Bindersand preservatives, which are used for shrimp feeds, are shown and subscribed. In raw material the main problem is the need to ensurehigh protein content in the shrimp feed recipes. Because of many factors, fish meal quantity should be reduced in recipes. Becauseof its attractive amino acid content, availability and relatively affordable price, soybean meal and soy concentrates have receivedincreasing attention as substitutes for marine animal meals.The features of technological lines and processes of production of mixed feeds for shrimp are shown.Еhe advantages and

Radiation sterilization of livestock feeds

International Nuclear Information System (INIS)

Kawashima, Koji

1984-01-01

The radiation sterilization of livestock feeds is not much used presently because the process is not known well, and the cost is relatively high. However, its effect of sterilization is absolute, the radiation-sterilized feeds are safe in both nutrition and toxicity, and do not affect the appetite of livestocks, and the radiation energy required is small. In the future, as in the sterilization of medical supplies, feed radiation sterilization plants should be established, to stabilize livestock industry and to contribute to the health control of experimental animals. The following matters are described: radiation, comparison between radiation sterilization and other sterilization methods, the practice of feed radiation sterilization, the adverse effects of radiation sterilization, economic aspect, and the situation of feed radiation sterilization in various countries. (Mori, K.)

Quality assurance for animal feed analysis laboratories

NARCIS (Netherlands)

Balthrop, J.; Brand, B.; Cowie, R.A.; Danier, J.; Boever, de J.L.; Jonge, de L.H.; Jackson, F.; Makkar, H.P.S.; Piotrowski, C.

2011-01-01

Every sector of the livestock industry, the associated services and the wellbeing of both animals and humans are influenced by animal feeding. The availability of accurate, reliable and reproducible analytical data is imperative for proper feed formulation. Only reliable analysis can lead to the

The technology of fish-vegetable feed production

Directory of Open Access Journals (Sweden)

Mukatova M. D.

2016-09-01

Full Text Available Perspective direction of the Volga-Caspian basin fisheries is increasing the productivity of aquaculture production which requires the availability of sufficient quantities of feed. The cutting waste of carp and crucian carp, crayfish processing (cephalothorax, wheat bran, soy isolate, freshwater plants – pondweed perfoliate, fish-vegetable ration, produced feeding staffs have been investigated. In researching samples of manufactured pelleted feeds the standard methods adopted in the animal feed industry have been used. The number of nitrogen-free extractives and energy value has been determined by calculation. The composition of fish-vegetable ration has been worked out. Some manufacturing inspection of fish-vegetable feed technology using proofing process has been carried out. The possibility of manufacturing on the basis of crushed fish waste of the company LLC "VES" and dry ingredients of fish-vegetable feed has been determined; the output of feed at water content of not more than 10 % is 43 % of feed mix based on the mass of directed waste equal to 84 %. The pilot batch of dry fish-vegetable feed has been investigated to establish quality indicators. It has been determined that fish-vegetable feed meets the requirements of GOST 10385–2014 "Combined feeding staffs for fishes. General specifications" as for main quality indicators and refers to economic grower for catfish and carp fish weighing more than 50 g. This reveals good palatability of the experimental batch of floating feed by carp fish species and African catfish. Thus, fish-vegetable feed manufacturing technology can be implemented in the production for processing secondary raw materials: waste from butchering fish by grinding, cooking, mixing with selected vegetable fillings which is waste of flour or grain processing industries and freshwater plants mowed annually during the reclamation works on the Volga delta.

DISAIN PROSES KEAMANAN PANGAN PADA SISTEM MANAJEMEN INDUSTRI PAKAN UNGGAS

Directory of Open Access Journals (Sweden)

Legis Tsaniyah

2017-11-01

Full Text Available The feed industry shall maintain quality and food safety of their products. The research conducted in the year of 2015-2016 was to design the optimum condition of food safety consideration for feed industries in Indonesia. Feed for livestock was formulated by using corn meal, soya protein, fish meals, rice bran, veterinary drugs, steam, and other ingredients. Growth promotor materials were formulated from vitamin, antibiotics, amino acid, methylene blue, and other trace elements also were added in the formulation. The feed ingredients are potential sources of food safety hazard in feed products. Result of model analysis found the major sources of food safety risks, i.e.1 veterinary drugs residues (X1; 2 aflatoxin potential in humid corn meals (X2, and3 alfatoxin potential in humid soya meal (X3. Minimisation model formulated for food safety in feed production was Z = 13.78 X1 + 10.00 X2 + 7.67 X3. The optimisation model by using simplex solution found maximum bioaccumulation value index of 93.33 per ton feed production. The verification model done for two feed industries and calculated bioaccumulation index were 20.16 and 24.43 per ton livestock feed production. The result concluded that the feed produced by both industries have been recommended safe to consume. The optimum condition for food safety in livestock feed industry interpreted from this optimal conditions.

The Artificial Milk Feeding or Breast Feeding: Context Dependant Practices. Brazil, 1960-1988

Directory of Open Access Journals (Sweden)

Suely Teresinha Schmidt Passos de Amorim

2008-05-01

Full Text Available The aim of this study was the discourse analysis on breast feeding from 1960 through 1988 in Brazil, on articles published in famous women magazines. The focus of the study is the History area, mainly the Feeding History, with an interdisciplinary approach. The initial period – 1960 – is linked with the end of Juscelino Kubitschek’s Government, when the economy, guided by the industrial sector, had grown in relative and absolute terms. The final period – 1988 – characterizes the Brazilian Norm of Suckling Feeding Business approval, which restricted the milk powder marketing. The change on discourses enunciates was very evident. During the period the artificial breast feeding was stimulated, the discourse main enunciate was the women’s condition, women’s valorization and their right of freedom. With the re-encouragement to the women breast feeding the discourses were totally on this usage defense, minimizing women’s daily difficulties.

Polish food industry 2008-2013

OpenAIRE

Mroczek, Robert; Drożdż, Jadwiga; Tereszczuk, Mirosława; Urban, Roman

2014-01-01

The aim of the study is to evaluate the functioning of the food industry and its various sectors in 2008-2013. Meat and poultry industry. Dairy industry. Fishing industry. Milling industry. Sugar industry. Oil-mill industry. Processing of fruit, vegetables and potatoes. Bakery industry. Confectionery industry. Feed industry. Production of other food products. Production of alcoholic beverages.Tobacco industry. Food industry.

Analysis of the policy effects of downstream Feed-In Tariff on China’s solar photovoltaic industry

International Nuclear Information System (INIS)

Wang, Hongwei; Zheng, Shilin; Zhang, Yanhua; Zhang, Kai

2016-01-01

The Chinese government initiated the Feed-In Tariff (“FIT”) policy for downstream power generation in August 2013. The effectiveness of the downstream FIT policy has attracted the attention of academia and government. Using the quarterly data of listed solar PV companies between 2009 and 2015, this paper provides an empirical analysis regarding the effects of the downstream FIT policy. We find that (1) the FIT policy has significantly enhanced the inventory turnover of listed PV firms and improved their profitability; (2) the FIT policy has significant effects on the inventory turnover of midstream companies and mixed industry-chain companies mainly engaged in downstream operations; (3) FIT policy is more favorable towards increasing the inventory turnover of private enterprises. Our results indicate that the FIT policy can have substantial effects on the sustainable development of China's solar photovoltaic industry. - Highlights: •The article focuses on the analysis of the effect of downstream FIT policy. •We test how FIT policy affects overcapacity and profitability of solar PV companies. •We find FIT policy significantly solved the overcapacity of China’s solar PV industry. •We find FIT policy improved profitability of listed solar PV companies. •FIT policy can’t be played alone and should be combined with taxation and R&D policy.

Xanthophylls in Poultry Feeding

Science.gov (United States)

Breithaupt, Diemar R.

Since most consumers associate an intense colour of food with healthy animals and high food quality, xanthophylls are widely used as feed additives to generate products that meet consumers' demands. An important large-scale application is in poultry farming, where xanthophylls are added to feed to give the golden colour of egg yolk that is so much appreciated. Now, with numerous new applications in human food, in the pharmaceutical industry, and in cosmetic products, there is an increasing demand for xanthophylls on the international market (Volume 5, Chapter 4).

Environmental health impacts of feeding crops to farmed fish.

Science.gov (United States)

Fry, Jillian P; Love, David C; MacDonald, Graham K; West, Paul C; Engstrom, Peder M; Nachman, Keeve E; Lawrence, Robert S

2016-05-01

Half of the seafood consumed globally now comes from aquaculture, or farmed seafood. Aquaculture therefore plays an increasingly important role in the global food system, the environment, and human health. Traditionally, aquaculture feed has contained high levels of wild fish, which is unsustainable for ocean ecosystems as demand grows. The aquaculture industry is shifting to crop-based feed ingredients, such as soy, to replace wild fish as a feed source and allow for continued industry growth. This shift fundamentally links seafood production to terrestrial agriculture, and multidisciplinary research is needed to understand the ecological and environmental health implications. We provide basic estimates of the agricultural resource use associated with producing the top five crops used in commercial aquaculture feed. Aquaculture's environmental footprint may now include nutrient and pesticide runoff from industrial crop production, and depending on where and how feed crops are produced, could be indirectly linked to associated negative health outcomes. We summarize key environmental health research on health effects associated with exposure to air, water, and soil contaminated by industrial crop production. Our review also finds that changes in the nutritional content of farmed seafood products due to altered feed composition could impact human nutrition. Based on our literature reviews and estimates of resource use, we present a conceptual framework describing the potential links between increasing use of crop-based ingredients in aquaculture and human health. Additional data and geographic sourcing information for crop-based ingredients are needed to fully assess the environmental health implications of this trend. This is especially critical in the context of a food system that is using both aquatic and terrestrial resources at unsustainable rates. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

Feed or bioenergy production from agri-industrial residues?

DEFF Research Database (Denmark)

Tonini, Davide; Hamelin, Lorie; Astrup, Thomas Fruergaard

induced GHG emissions). All in all, the use of biomasses that are today used as animal feed (e.g. beet molasses) induced significant GHG emissions through iLUC. These were quantified at between 1-3.5 t CO2/t dry residue depending upon the nutritional value. The recommendation is to avoid the use...

Technological foundations of processing tomato pomace in feed additives

Directory of Open Access Journals (Sweden)

B. Yegorov

2015-05-01

Full Text Available Introduction. Search for new types of alternative raw material for the efficient development of poultry industry and problem of waste disposal of canning industry made it necessary to develop a method of processing tomato pomace in feed additives. Materials and methods. Sampling, preparation and testing were carried out by general and specific organ oleptic and physical-technological methods of assessment and analysis of the properties of raw materials and finished products. Results. Incorporation of tomato pomace in the feed additive reduces the cost of raw materials and expenses associated with moistening of the mixture before extrusion and incorporation of chalk feed will solve the problem of calcium imbalance of laying hens. It was found that extrusion process has improved the physical properties of feed additive and showed the possibility of its use as a feed component: moisture content decreased by 34.5 %, the angle of repose increased by 11.4 %, flowability decreased by 39.7 % and bulk density decreased by 32.3 %. Conclusions. The resulting feed additive will solve the problem of diversification of raw materials, waste, calcium imbalance of laying hens and reduce expenses on compound animal feedstuff production.

How to Build an RSS 20 Feed

CERN Document Server

Woodman, Mark

2006-01-01

The little orange feed icons are everywhere on the web. From search engines to shopping sites to blogs, Really Simple Syndication (RSS 2.0) has become one of the hottest web technologies going. RSS 2.0 is a powerful - yet surprisingly easy - way to distributing timely content to a web-based audience. This Short Cut will give you the hands-on knowledge you need to build an RSS 2.0 feed. Along the way you'll learn not only the mechanics of building a feed, but industry-accepted best practices for creating feeds that perform well in various situations. Are you ready? Roll up your sleeves, c

Feeding style of adolescent mothers and complementary feeding practice of their infants

Directory of Open Access Journals (Sweden)

Karla Adriana Oliveira da COSTA

Full Text Available ABSTRACT Objective To evaluate feeding styles of adolescent mothers and complementary feeding practices of their infants. Methods A cross-sectional study comparing a group of dyads of 50 adolescent mothers (ages 15 to 19 with 62 adult mothers (ages 24 to 44 and their infants (9 to 24 months was performed. All mothers and infants were assisted by three basic health family units in the city of Recife, Brazil. Data were collected through a structured interview on socioeconomic conditions, maternal styles of feeding the child, and evaluation of infant feeding practices. The food styles were classified as responsive, authoritative, and passive, according to the adapted form of Carvalhaes, Perosa and Silveira of 2009. The frequency of food intake was calculated for six food groups (1. Bread and cereals; 2. Fruits and vegetables; 3. Meat, eggs, and beans; 4. Milk and dairy products; 5. Sugars, sweets, and fats; 6. Industrialized food. Children’s anthropometry and body mass index by age were classified into Z-score according to the World Health Organization Standard Curves, 2006. Results Adolescent mothers began complementary feeding more frequently before the seventh month (.=0,02, presented less responsive (.=0.04 and more authoritarian feeding styles (.=0.01, and their children received more foods with sugars, oils, and fats (.=0.02, and less meat, eggs, and beans (.=0.06 than the children of adult mothers. Conclusion Adolescent mothers adopt less responsive eating styles and offer more inadequate complementary feeding for their infants.

Feed Additives for Aquaculture and Aquarium Culture

OpenAIRE

Barata, Eduardo N.; Velez, Zélia

2011-01-01

The presente invention refers of feed additives for aquaculture and aquarium culture. These additives comprise the amino acid, 1-methyl-L-tryptophane, or its isomers with the objective of improving the attractiveness of feeds used in aquaculture and aquaria for fish, as well as other aquatic organisms, under culture conditions. Therefore, this invention has applications in the agriculture-food industry.

The Effects of Forage Policy on Feed Costs in Korea

Directory of Open Access Journals (Sweden)

Jae Bong Chang

2018-05-01

Full Text Available Feeding operations are substantial on livestock farms, besides being potentially expensive. Feeding efficiency has been considered a major influence on profits in the livestock industry. Indeed, feed costs are shown to be the largest single item of production cost in Korea. To promote production and use of domestic forage, the Korean government has enforced the forage base expansion program that strengthens the competitiveness of the livestock industry by reducing the production cost. The forage base expansion program includes three main policies: subsidized forage production, support for processing and distribution, and expanding land for forage production. This paper investigates the influence of the government’s policies often conjectured to have pronounced effects on forage production. To evaluate the forage policies, this paper uses a path-analysis approach linking government spending on forage base expansion programs and feed costs. Results indicate that the Korean government’s spending on supporting domestic forage production results in a decrease in the ratio of forage expenses to total feed cost.

New handling systems as technical support for the working process. Part 6. Feeding devices

Energy Technology Data Exchange (ETDEWEB)

Becher, H; Burkhardt, R; Drexel, P; Graf, B; Krreis, W

1982-03-01

Social, technical and economic reasons require an enhanced application of handling systems such as industrial robots. Quality and efficiency of an industrial robot depends greatly on feeding devices, and the ARGE-HHS within its project new handling systems as a technical aid in the working process intends to analyze all feeding devices that are likely to be most suitable for advanced applications. Forty one feeding devices were developed, known devices were modified, adapted to different applications, and tested. A variety of feeding devices for most applications in the field of material handling is reported.

Feeding livestock food residue and the consequences for the environmental impact of meat

NARCIS (Netherlands)

Elferink, E.V.; Nonhebel, S.; Moll, H.C.

2008-01-01

The environmental impact of meat is high mainly due to the feed required by livestock in combination with the impacts of cultivating, transporting and processing of feed crops such as tapioca and grains. Like regular feed crops, livestock also feed on residue from the food industry, such as pulp,

Faba beans and peas in poultry feed: economic assessment.

Science.gov (United States)

Proskina, Liga; Cerina, Sallija

2017-10-01

Broiler diets mainly consist of cereals and protein-rich feed sources; in the EU-27, poultry farming consumes 24% of the total amount of protein-rich feedstuffs. Since the EU produces only 30% of the total quantity of protein crops used for feed, it is necessary to promote the use of traditional European protein crops (beans, peas) for feed in livestock farming. The research aim is to identify economic gains from the production of broiler chicken meat, replacing soybean meal with domestic faba beans and field peas in broiler chicken diets. Adding field peas and faba beans to the broiler feed ration resulted in a significant live weight increase (5.74-11.95%) at the selling age, a decrease in the feed conversion ratio by 0.61-6.06%, and decrease in the product unit cost (15.34-37.06%) as well as an increase in the production efficiency factor (8.70-48.54), compared with the control group. The optimum kind of legume species used in the broiler diet was peas, which were added in the amount of 200 g kg -1 , resulting in live weight gain, a decrease in the feed conversion ratio and an increase in the production efficiency factor. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

Development of feeding strategy for ruminant livestock by nuclear techniques

International Nuclear Information System (INIS)

Ozcan, H.; Cetinkaya, N.

2002-01-01

In tropical and subtropical areas crop residues and agro-industrial byproducts are used for feeding ruminant livestock under limited or zero grazing conditions. In order to increase feeding efficiency and livestock productivity supplementation are essential to meet deficient nutrients fbr the diets. For the assessment the impact by supplements or supplementation for feed utilization efficiency nuclear techniques like isotope dilution method are unique for the purpose. For the evaluation the impact by supplementation or supplements by various nitrogen sources together with salts and minerals for energy utilization efficiency carbon-14 labelled acetate was used for tracer to measure outflow rates for volatile fatty acids (VFAs) from rumen by Angora goat bucks.The supplemented diets led to increased VFAs outflow rates from rumen. The conclusion was that ruminant diets composed by crop residues and agro-industrial by-products need supplementation for deficient nutrients to increase feed energy utilization efficiency by ruminant livestock

The relationship between different measures of feed efficiency and feeding behavior traits in Duroc pigs.

Science.gov (United States)

Lu, D; Jiao, S; Tiezzi, F; Knauer, M; Huang, Y; Gray, K A; Maltecca, C

2017-08-01

Utilization of feed in livestock species consists of a wide range of biological processes, and therefore, its efficiency can be expressed in various ways, including direct measurement, such as daily feed intake, as well as indicator measures, such as feeding behavior. Measuring feed efficiency is important to the swine industry, and its accuracy can be enhanced by using automated feeding systems, which record feed intake and associated feeding behavior of individual animals. Each automated feeder space is often shared among several pigs and therefore raises concerns about social interactions among pen mates with regard to feeding behavior. The study herein used a data set of 14,901 Duroc boars with individual records on feed intake, feeding behavior, and other off-test traits. These traits were modeled with and without the random spatial effect of Pen_Room, a concatenation of room and pen, or random social interaction among pen mates. The nonheritable spatial effect of common Pen-Room was observed for traits directly measuring feed intake and accounted for up to 13% of the total phenotypic variance in the average daily feeding rate. The social interaction effect explained larger proportions of phenotypic variation in all the traits studied, with the highest being 59% for ADFI in the group of feeding behaviors, 73% for residual feed intake (RFI; RFI4 and RFI6) in the feed efficiency traits, and 69% for intramuscular fat percentage in the off-test traits. After accounting for the social interaction effect, residual BW gain and RFI and BW gain (RIG) were found to have the heritability of 0.38 and 0.18, respectively, and had strong genetic correlations with growth and off-test traits. Feeding behavior traits were found to be moderately heritable, ranging from 0.14 (ADFI) to 0.52 (average daily occupation time), and some of them were strongly correlated with feed efficiency measures; for example, there was a genetic correlation of 0.88 between ADFI and RFI6. Our work

Fermented whey as poultry feed additive to prevent fungal contamination.

Science.gov (United States)

Londero, Alejandra; León Peláez, María A; Diosma, Gabriela; De Antoni, Graciela L; Abraham, Analía G; Garrote, Graciela L

2014-12-01

Fungal contamination of poultry feed causes economic losses to industry and represents a potential risk to animal health. The aim of the present study was to analyze the effectiveness of whey fermented with kefir grains as additive to reduce fungal incidence, thus improving feed safety. Whey fermented for 24 h at 20 °C with kefir grains (100 g L(-1) ) reduced conidial germination of Aspergillus flavus, Aspergillus parasiticus, Aspergillus terreus, Aspergillus fumigatus, Penicillium crustosum, Trichoderma longibrachiatum and Rhizopus sp. Poultry feed supplemented with fermented whey (1 L kg(-1) ) was two to four times more resistant to fungal contamination than control feed depending on the fungal species. Additionally, it contained kefir microorganisms at levels of 1 × 10(8) colony-forming units (CFU) kg(-1) of lactic acid bacteria and 6 × 10(7) CFU kg(-1) of yeasts even after 30 days of storage. Fermented whey added to poultry feed acted as a biopreservative, improving its resistance to fungal contamination and increasing its shelf life. © 2014 Society of Chemical Industry.

The policy effects of feed-in tariff and renewable portfolio standard: A case study of China's waste incineration power industry.

Science.gov (United States)

Xin-Gang, Zhao; Yu-Zhuo, Zhang; Ling-Zhi, Ren; Yi, Zuo; Zhi-Gong, Wu

2017-10-01

Among the regulatory policies, feed-in tariffs (FIT) and renewable portfolio standards (RPS) are the most popular to promote the development of renewable energy power industry. They can significantly contribute to the expansion of domestic industrial activities in terms of sustainable energy. This paper uses system dynamics (SD) to establish models of long-term development of China's waste incineration power industry under FIT and RPS schemes, and provides a case study by using scenario analysis method. The model, on the one hand, not only clearly shows the complex logical relationship between the factors but also assesses policy effects of the two policy tools in the development of the industry. On the other hand, it provides a reference for scholars to study similar problems in different countries, thereby facilitating an understanding of waste incineration power's long-term sustainable development pattern under FIT and RPS schemes, and helping to provide references for policy-making institutions. The results show that in the perfect competitive market, the implementation of RPS can promote long-term and rapid development of China's waste incineration power industry given the constraints and actions of the mechanisms of RPS quota proportion, the TGC valid period, and fines, compared with FIT. At the end of the paper, policy implications are offered as references for the government. Copyright © 2017 Elsevier Ltd. All rights reserved.

WAYS OF REDUCTION OF ADVERSE FEEDING EFFECT ON ANIMALS

OpenAIRE

Коnоnеnко S. I.

2016-01-01

The successful development of livestock requires maintaining and further increasing of the genetic potential, the basis for the manifestation of which is the adequite balanced feeding. Currently, one of the most urgent problems of livestock breeding is to find ways for reduction of the negative impact of various feeding factors on the animals. In industrial conditions, it is difficult to exclude various feed stresses, which lead to a decrease in productivity, survival rate and ill health of a...

Systems Genetics and Transcriptomics of Feed Efficiency in Dairy Cattle

DEFF Research Database (Denmark)

Salleh, Suraya Binti Mohamad; Hoglund, J.; Løvendahl, P.

Feed is the largest variable cost in milk production industries, thus improving feed efficiency will give better use of resources. This project works closely on definitions of feed efficiency in dairy cattle and uses advanced integrated genomics, bioinformatics and systems biology methods linking......-hydroxybutyrates, Triacylglyceride and urea. Feed efficiency, namely Residual Feed Intake and Kleiber Ratio based on daily feed or dry matter intake, body weight and milk production records also will be calculated. The bovine RNAseq gene expression data will be analyzed using statistical-bioinformatics and systems biology...... partitioning and deliver predictive biomarkers for feed efficiency in cattle. This study will also contribute to systems genomic prediction or selection models including the information on potential causal genes / SNPs or their functional modules....

Modelling the feed mix for poultry production, the case of Adama Musa farms, in Ghana

OpenAIRE

S. K. Amponsah; Dominic Otoo; A. K. Peprah; S. D. Ampofo

2015-01-01

The poultry industry has a significant importance on national economy. It is a popular industry for the small holders with tremendous contribution to Gross Domestic Product (GDP) and employment creation. Poultry feed cost represents over sixty (60) percent of the total cost of poultry production; consequently, efficient feed formulation practice is required for a sustainable poultry industry. Many Ghanaian poultry farmers, however, employ inefficient methods like rule of thumb, experiences, a...

Fish for Feed vs Fish for Food

OpenAIRE

Allan, Geoff L.

2004-01-01

Aquaculture is the fastest-growing food producing industry sector in the world. Demand for feed ingredients, particularly for preferred protein sources such as fishmeal, fish oil and ‘trash fish’, has also increased, raising questions about sustainability and uses of fish for aquaculture feeds or directly as human food. Approximately 30 million metric tonnes (MMT) of fish from capture fisheries are used each year to produce fishmeal and fish oil. The species used are not usually consumed dire...

Feed-in tariff in Ukraine: The only driver of renewables' industry growth?

International Nuclear Information System (INIS)

Trypolska, Galyna

2012-01-01

The paper aims to review the recently adopted legislation on feed-in tariffs in Ukraine, focusing on its advantages and drawbacks, as well as on the related challenges. The recommendations listed in the paper will help to change the existing legislation regarding green electricity by means of eliminating its main drawbacks. The best prospects for renewable electricity production are related to the energy from the wind and the sun, nonetheless energy from the sun and biomass is used mostly for heating purposes, whereas the number of plans for the construction of wind farms and solar plants is growing tremendously. Despite policies and legislation being in place for the inclusion of electricity from renewables in the grid, technical and financial obstacles exist. There are plenty of plans to build new generating facilities, but at the same time there is absolutely no information about the construction of power backup. The existing regulatory policy regarding green electricity production and consumption still has significant potential for improvement. Compared to other measures, feed-in tariff implementation has spurred green electricity production in Ukraine, because feed-in tariff rates are high, and grid access is guaranteed by law, a major advantage of the current legislation on renewables in Ukraine. - Highlights: ► The number of wind farms and solar plants construction plans in Ukraine is growing. ► Guarantees to obtain feed-in tariff investors get after completion of construction. ► The definition of the term “biomass” in Ukrainian legislation needs to be reviewed. ► The investments in renewables are mostly commenced by Ukrainian investors. ► Feed-in tariff is the most efficient measure for green electricity production.

Decontamination of poultry feed from ochratoxin A by UV and sunlight radiations.

Science.gov (United States)

Ameer Sumbal, Gul; Hussain Shar, Zahid; Hussain Sherazi, Syed Tufail; Sirajuddin; Nizamani, Shafi Muhammad; Mahesar, Safaraz Ahmed

2016-06-01

Mycotoxin-contaminated feed is very dangerous for the growth and even life of poultry. The objective of the current study was to investigate the efficacy of ultra-violet irradiation for decontamination of ochratoxin A (OTA) in spiked and naturally contaminated poultry feed samples. Spiked and naturally contaminated feed samples were irradiated with ultra-violet light (UV) at distance of 25 cm over the feed samples. In vitro, the effect of UV intensity (0.1 mW cm(-2) at 254 nm UV-C) on different types of poultry feeds contaminated with OTA was evaluated. The same samples were also irradiated with sunlight and analysed for OTA by an indirect enzyme linked immunosorbent assay method. Poultry feed samples containing 500 µg kg(-1) were 100% decontaminated in 180 min with UV radiation while OTA was decreased to 70-95 µg kg(-1) using the same poultry feed samples after 8 h sunlight irradiation. Therefore, UV light was found to be more effective. Only 1 h of UV irradiation was found to be sufficient to bring the OTA level to the maximum regulatory limit suggested for poultry feeds (100 µg kg(-1) ), while 8 h were needed to obtain this level using sunlight radiations. The proposed approach is a viable option to reduce the level of OTA in contaminated poultry feeds. © 2015 Society of Chemical Industry. © 2015 Society of Chemical Industry.

The new Israeli feed safety law: challenges in relation to animal and public health.

Science.gov (United States)

Barel, Shimon; Elad, Dani; Cuneah, Olga; Shimshoni, Jakob A

2017-03-01

The Israeli feed safety legislation, which came to prominence in the early 1970s, has undergone a major change from simple feed safety and quality regulations to a more holistic concept of control of feed safety and quality throughout the whole feed production chain, from farm to the end user table. In February 2014, a new law was approved by the Israeli parliament, namely the Control of Animal Feed Law, which is expected to enter into effect in 2017. The law is intended to regulate the production and marketing of animal feed, guaranteeing the safety and quality of animal products throughout the production chain. The responsibility on the implementation of the new feed law was moved from the Plant Protection Inspection Service to the Veterinary Services and Animal Health. In preparation for the law's implementation, we have characterized the various sources and production lines of feed for farm and domestic animals in Israel and assessed the current feed safety challenges in terms of potential hazards or undesirable substances. Moreover, the basic requirements for feed safety laboratories, which are mandatory for analyzing and testing for potential contaminants, are summarized for each of the contaminants discussed. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

Planktonic Crustacean Culture - Live Planktonic Crustaceans as Live Feed for Finfish and Shrimps in Aquaculture

DEFF Research Database (Denmark)

Jepsen, Per Meyer; Syberg, Kristian; Drillet, Guillaume

2018-01-01

The cultivation of planktonic crustaceans as live feed is of paramount importance for the aquaculture and aquarium industries. The use of live cladocerans as feed for freshwater fish is limited to the aquarium industry, whereas Artemia and copepods are used to feed edible marine fish larvae...... assessments for hazardous chemicals. Cladocerans are widely used for ecotoxicology testing but Artemia and copepods are emerging new model species. In the present chapter, we review the culturing procedures of these important planktonic crustaceans: Artemia, cladocerans and copepods and discuss their use...

Influence of the feed pipe position of an industrial scale two-phase decanter on extraction efficiency and chemical-sensory characteristics of virgin olive oil.

Science.gov (United States)

Caponio, Francesco; Squeo, Giacomo; Brunetti, Lucio; Pasqualone, Antonella; Summo, Carmine; Paradiso, Vito M; Catalano, Pasquale; Bianchi, Biagio

2018-02-10

Nowadays, olive oil extraction is basically achieved by means of two-phase decanters, which allow a reduction of water consumption and the leaching of phenolic compounds. Despite this, most of the working settings derive from studies carried out on three-phase decanters. Hence, the aim of the present study was to assess the influence of two-phase decanter feed pipe position (FP) on the extraction efficiency and chemical-sensory characteristics of virgin olive oil. Three different positions were considered: at 825 mm (FP1), 610 mm (FP2) and 520 mm (FP3) from the outlet of the oily phase. Position FP3 allowed the highest oil recovery (up to 10%), the lowest percentage of oil in the olive pomace and, in general, a regular trend in terms of oil extraction efficiency. However, the oily must that came out of the decanter was not completely clean in terms of residual content of solid sediment and water. The feeding position partially affected the profile of antioxidant compounds. In two-phase decanters, loading the olive paste close to the outlet of the oily phase is recommended to increase the extraction efficiency without jeopardizing the chemical-sensory characteristics of virgin olive oil. © 2018 Society of Chemical Industry. © 2018 Society of Chemical Industry.

APPLICATION OF GRANULATION TECHNOLOGY IN VARIOUS INDUSTRIES

Directory of Open Access Journals (Sweden)

B. V. YEGOROV

2017-10-01

Full Text Available Science and practice proved the high efficiency of granulated mixed fodders. This article presents an overview of granulation technologies for various industries. This article discusses the application of granulation technologies in various industries. The processes of granulation are mass technological processes currently used in a wide range of industries: feed industry, food industry, pharmaceutical industry, fertilizer production, polyethylene, metal production, mining, etc. A wide range of different materials are granulated, including chemicals, iron ore, mixed fodder, and much more. Granulation is a process of pressing or shaping a material in the form of granules.  Granulation is widely used in the production of pigments, dyes, synthetic detergents, catalysts, plastics, soot, chemical reagents, etc. The use of granular raw materials in the metallurgical industry helps not only to mechanize processes, but also to increase their intensity by increasing the contact surface of interacting media. Granular fertilizers retain their properties for a long time. In the mining industry, granulation processes are used at the stage of preparation and enrichment of raw materials and release of the finished product.  Particular attention is paid to the feed industry. Granulation allows to ensure stable homogeneity, to improve sanitary and hygienic parameters, to increase nutritional value, to increase the storage period, improve the physical properties. However, despite all the advantages, the existing granulation production lines have a relatively high productivity and, at the same time, a high energy intensity. In this regard, this article proposes a technology for improving the granulation of mixed fodders. According to a preliminary literary review, It should be concluded that improving the technology of the granulation process for feed production is a topical issue in the feed industry today. The development of technology for improving the

[Improving the feed conversion rate in the pig fattening industry by optimising hygienic management].

Science.gov (United States)

Riedl, Antonia M; Völkel, Inger; Schlindwein, Bernhard; Czerny, Claus-Peter

2013-01-01

Considering continuously increasing forage costs, the feed conversion rate has a major impact on the economic efficiency in hog fattening. The influence of hygienic management strategies on animal health and feed efficiency was evaluated by an online-study comprising animal health management data of 202 German pig fatteners. Data analysis included a simple comparison of averages, a linear regression analysis, and a cluster analysis. Due to geographical distribution and size of premises, the random sample was not representative but yielded in significant results. The total impact of hygienic management on feed conversion was calculated to be 23.9 %. Professional performance of rodent control (beta = 0.357; p conversion ranged from Euro 1.15 to and Euro 2.53 per pig. Likewise optimized growth performance as a result of improved hygienic management could partly compensate increasing feed costs. The results of this online-study reveal the need to establish reliable HACCP systems on farm level.

Agroindustrial and Chicken Poultry Waste as Feed Supplement for Nila Fish (Oreochromis sp)

International Nuclear Information System (INIS)

Harsojo, L.S.; Andini, S.H.; Rosalina, S.; Suwirma

2000-01-01

An experiment was conducted to study the use of industrial waste such as soybean sauce waste, tofu waste and chicken manure as feed supplement for nila fish raised in in ponds to increase the body weight. There were four compositions i.e composition A consisted of soybean sauce waste mixed with the other materials; composition B consisted of irradiated chicken manure mixed with the other materials; composition C was commercial pellet as control and composition D was tofu waste . The feeding with the amount of 3% from total body weight was given to the fishes three times per day. The quality of food measured with the conversion value (amount of feed for 1 kg body weight gain) and the quality of water i.e pH, temperature and oxygen concentration were also measured. Determination of heavy metal content in fish and water were carried out using the atomic absorption spectrophotometer (AAS). Results of the experiment showed that feed of composition A (soybean sauce waste) at 12 th 21 st weeks had lowest conversion value although statistically there was no different significant among the others feed. The content of heavy metals in all fish and water were under permissible limit and also for Fe content was also under permissible limit.There were no Salmonella found in the industrial waste. This means that industrial waste can be used safely as feed supplement for fish and has also the same effect compared to the commercial pelletized for the growth of fish. The water quality was found suitable for the growth of fish

Bio-processing of agro-byproducts to animal feed.

Science.gov (United States)

Ajila, C M; Brar, S K; Verma, M; Tyagi, R D; Godbout, S; Valéro, J R

2012-12-01

Agricultural and food-industry residues constitute a major proportion (almost 30%) of worldwide agricultural production. These wastes mainly comprise lignocellulosic materials, fruit and vegetable wastes, sugar-industry wastes as well as animal and fisheries refuse and byproducts. Agro-residues are rich in many bioactive and nutraceutical compounds, such as polyphenolics, carotenoids and dietary fiber among others. Agro residues are a major valuable biomass and present potential solutions to problems of animal nutrition and the worldwide supply of protein and calories, if appropriate technologies can be used for their valorization by nutrient enrichment. Technologies available for protein enrichment of these wastes include solid substrate fermentation, ensiling, and high solid or slurry processes. Technologies to be developed for the reprocessing of these wastes need to take account of the peculiarities of individual wastes and the environment in which they are generated, reprocessed, and used. In particular, such technologies need to deliver products that are safe, not just for animal feed use, but also from the perspective of human feeding. This review focuses on the major current applications of solid-state fermentation in relation to the feed sector.

Feed type based expert systems in mineral processing plants

International Nuclear Information System (INIS)

Jamsa-Jounela, S.-L.; Laine, S.; Laurila, H.

1999-01-01

Artificial Intelligence includes excellent tools for the control and supervision of industrial processes. Several thousand industrial applications have been reported worldwide. Recently, the designers of the AI systems have begun to hybridize the intelligent techniques, expert systems, fuzzy logic and neural networks, to enhance the capability of the AI systems. Expert systems have proved to be ideal candidates especially for the control of mineral processes. As successful case projects, expert system based on on-line classification of the feed type is described in this paper. The essential feature of this expert system is the classification of different feed types and their distinct control strategies at the plant. In addition to the classification, the expert system has a database containing information about how to handle the determined feed type. This self-learning database scans historical process data to suggest the best treatment for the ore type under processing. The system has been tested in two concentrators, the Outokumpu Finnmines Oy, Hitura mine and Outokumpu Chrome Oy, Kemi mine. (author)

Oleaginous crops as integrated production platforms for food, feed, fuel and renewable industrial feedstock

Directory of Open Access Journals (Sweden)

Beaudoin Frédéric

2014-11-01

Full Text Available The world faces considerable challenges including how to produce more biomass for food, feed, fuel and industrial feedstock without significantly impacting on our environment or increasing our consumption of limited resources such as water or petroleum-derived carbon. This has been described as sustainable intensification. Oleaginous crops have the potential to provide renewable resources for all these commodities, provided they can be engineered to meet end-use requirements, and that they can be produced on sufficient scale to meet current growing world population and industrial demand. Although traditional breeding methods have been used successfully to modify the fatty acid composition of oils, metabolic engineering provides a more rapid and direct method for manipulating plant lipid composition. Recent advances in our understanding of the biochemical mechanisms of seed oil biogenesis and the cloning of genes involved in fatty acid and oil metabolic pathways, have allowed the generation of oilseed crops that produce ‘designer oils’ tailored for specific applications and the conversion of high biomass crops into novel oleaginous crops. However, improvement of complex quantitative traits in oilseed crops remains more challenging as the underlying genetic determinants are still poorly understood. Technological advances in sequencing and computing have allowed the development of an association genetics method applicable to crops with complex genomes. Associative transcriptomics approaches and high throughput lipidomic profiling can be used to identify the genetic components controlling quantitative variation for lipid related traits in polyploid crops like oilseed rape and provide molecular tools for marker assisted breeding. In this review we are citing examples of traits with potential for bio-refining that can be harvested as co-products in seeds, but also in non-harvested biomass.

System Genetics and Transcriptomic of Feed Efficiency in Nordic Dairy Cattle

DEFF Research Database (Denmark)

Salleh, Suraya Binti Mohamad; Höglund, Johanna; Løvendahl, Peter

Feed is the largest variable cost in milk production industries, thus improving feed efficiency will give better use of resources. This project works closely on definitions of feed efficiency in dairy cattle and uses advanced integrated genomics, bioinformatics and systems biology methods linking......-bioinformatics and systems biology approaches to identify a list of differentially expressed (DE) genes, co-expressed (CE) genes, differentially wired networks, co-expression, transcriptional regulatory networks and hub genes/biomarkers for feed efficiency. This study will provide molecular mechanisms of metabolic processes......, energy balance, nutrient partitioning and deliver predictive biomarkers for feed efficiency in cattle. This study will also contribute to systems genomic prediction or selection models including the information on potential causal genes / SNPs or their functional modules....

Engineering Thermostable Microbial Xylanases Toward its Industrial Applications.

Science.gov (United States)

Kumar, Vishal; Dangi, Arun Kumar; Shukla, Pratyoosh

2018-03-01

Xylanases are one of the important hydrolytic enzymes which hydrolyze the β-1, 4 xylosidic linkage of the backbone of the xylan polymeric chain which consists of xylose subunits. Xylanases are mainly found in plant cell walls and are produced by several kinds of microorganisms such as fungi, bacteria, yeast, and some protozoans. The fungi are considered as most potent xylanase producers than that of yeast and bacteria. There is a broad series of industrial applications for the thermostable xylanase as an industrial enzyme. Thermostable xylanases have been used in a number of industries such as paper and pulp industry, biofuel industry, food and feed industry, textile industry, etc. The present review explores xylanase-substrate interactions using gene-editing tools toward the comprehension in improvement in industrial stability of xylanases. The various protein-engineering and metabolic-engineering methods have also been explored to improve operational stability of xylanase. Thermostable xylanases have also been used for improvement in animal feed nutritional value. Furthermore, they have been used directly in bakery and breweries, including a major use in paper and pulp industry as a biobleaching agent. This present review envisages some of such applications of thermostable xylanases for their bioengineering.

Influence of dietary component manipulation and feed management strategies on growth and rumen development of weaned dairy heifers

OpenAIRE

Dennis, Tana Shea

2016-01-01

Well-developed replacement heifers provide a central foundation for the continued success of the dairy industry. Emphasis on improving pre-weaned calf nutrition has predominated in the industry, but opportunities exist to improve post-weaning heifer nutrition and management. We aimed to evaluate common feed management strategies seen in the industry and their effects on growth, feed efficiency (G:F), and rumen development of calves from birth to 8 mo of age using pen- and individually-fed ani...

Biofuels and Their Co-Products as Livestock Feed: Global Economic and Environmental Implications.

Science.gov (United States)

Popp, József; Harangi-Rákos, Mónika; Gabnai, Zoltán; Balogh, Péter; Antal, Gabriella; Bai, Attila

2016-02-29

This review studies biofuel expansion in terms of competition between conventional and advanced biofuels based on bioenergy potential. Production of advanced biofuels is generally more expensive than current biofuels because products are not yet cost competitive. What is overlooked in the discussion about biofuel is the contribution the industry makes to the global animal feed supply and land use for cultivation of feedstocks. The global ethanol industry produces 44 million metric tonnes of high-quality feed, however, the co-products of biodiesel production have a moderate impact on the feed market contributing to just 8-9 million tonnes of protein meal output a year. By economically displacing traditional feed ingredients co-products from biofuel production are an important and valuable component of the biofuels sector and the global feed market. The return of co-products to the feed market has agricultural land use (and GHG emissions) implications as well. The use of co-products generated from grains and oilseeds can reduce net land use by 11% to 40%. The proportion of global cropland used for biofuels is currently some 2% (30-35 million hectares). By adding co-products substituted for grains and oilseeds the land required for cultivation of feedstocks declines to 1.5% of the global crop area.

Design and performance of feed-delivery systems for simulated radioactive waste slurries

International Nuclear Information System (INIS)

Perez, J.M. Jr.

1983-02-01

Processes for vitrifying simulated high-level radioactive waste have been developed at the Pacific Northwest Laboratory (PNL) over the last several years. Paralleling this effort, several feed systems used to deliver the simulated waste slurry to the melter have been tested. Because there had been little industrial experience in delivering abrasive slurries at feed rates of less than 10 L/min, early experience helped direct the design of more-dependable systems. Also, as feed delivery requirements changed, the feed system was modified to meet these new requirements. The various feed systems discussed in this document are part of this evolutionary process, so they have not been ranked against each other. The four slurry feed systems discussed are: (1) vertical-cantilevered centrifugal pump system; (2) airlift feed systems; (3) pressurized-loop systems; and (4) positive-displacement pump system. 20 figures, 11 tables

Perspectives on pasture versus indoor feeding of dairy cows.

Science.gov (United States)

Knaus, Wilhelm

2016-01-15

The dairy industry in many regions of the world has moved towards a high-input/high-output system maximising annual milk production per cow, primarily through increasing concentrate-based total mixed rations fed indoors year round, as opposed to allowing cows to feed on pasture. Pasture-based dairy systems in regions like New Zealand and Ireland are oriented towards maximum milk yield per unit of pasture, which has led to Holstein strains that are 50 to 100 kg lighter, exhibit a higher body condition score, and produce roughly half the annual amount of milk as compared to their Holstein counterparts kept in confinement in North America and Europe. Freedom from hunger might not be guaranteed when high-yielding dairy cows are kept on pasture without any supplemental feed, but at the same time no access to pasture can be considered an animal welfare concern, because pasturing is generally beneficial to the animals' health. On pasture, lighter-weight dairy cows with a medium milk production potential have proven to be superior with regard to feed efficiency and fertility. The year-round indoor feeding of high-yielding dairy cows with total mixed rations containing substantial amounts of human-edible crops from arable land puts global food security at risk and fails to utilise the evolutionary advantages of ruminants. © 2015 Society of Chemical Industry.

Filter feeding mechanics of Hypophthalmichthys molitrix regarding porous gill rakers

Science.gov (United States)

Palumbo, David; Bulusu, Kartik V.; Cohen, Karly; Hernandez, Particia; Leftwich, Megan C.; Plesniak, Michael W.

2017-11-01

The silver carp (Hypophthalmichthys molitrix) is a filter-feeding fish known to feed upon algal-growth in lakes, rivers, and aquacultures. The filter-feeding process centers on sponge-like membranes located in the carp's pharynx supported by fused gill rakers (GRs), which can efficiently strain suspended food particles as small as 4 µm without clogging. Guided by the anatomy of the silver carp, scanning electron microscope (SEM) images of GRs, and video of the silver carp feeding, we have hypothesized that the filtration mechanism involves a pump-based biological function to capture food particles within the GRs. Dye visualization experiments were performed on a silver carp cadaver head, an excised GR sample, and on a scaled GR in vitro model - the Artificial Gill Raker (AGR). Measurements are performed for the AGR using laser Doppler velocimetry (LDV) and penetration pressure monitoring with a biologically-inspired pumping mechanism. The role of mucus in the retention and capture of food particles has also been explored through rheological measurements, and further experimentation is planned. Our motivation stems from the potential to develop bioinspired industrial-scale filtration technologies ranging from wastewater treatment to filtration in the food industry. supported by GW Center for Biomimetics and Bioinspired Engineering.

Feed- and feed additives-related aspects of gut health and development in weanling pigs.

Science.gov (United States)

Pluske, John R

2013-01-07

The development of new/different management and feeding strategies to stimulate gut development and health in newly-weaned pigs, in order to improve growth performance while minimizing the use of antimicrobial compounds such as antibiotic growth promotants (AGP) and heavy mineral compounds, is essential for the long-term sustainability of the pig industry. Factors including the sub-optimal intake of nutrients and energy, inappropriate microbiota biomass and (or) balance, immature and compromised immune function, and psychosomatic factors caused by weaning can compromise both the efficiency of digestion and absorption and intestinal barrier function through mucosal damage and alteration of tight junction integrity. As a consequence, pigs at weaning are highly susceptible to pathogenic enteric conditions such as post-weaning diarrhea that may be caused by serotypes of enterotoxigenic Escherichia coli. Many dietary components, e.g., protein, fiber, feed additives and minerals, are known to influence microbial growth in the gastrointestinal tract that in turn can impact upon pig growth and health, although the relationships between these are sometimes not necessarily apparent or obvious. In a world climate of increased scrutiny over the use of antibiotics per se in pig production, certain feed additives are seen as alternatives/replacements to antibiotics, and have evolved in some cases to have important roles in everyday commercial pig nutrition. Nevertheless and in general, there remains inconsistency and variability in the efficacy of some feed additives and in cases of severe disease outbreaks, for example, therapeutic antibiotics and/or heavy minerals such as zinc oxide (ZnO) are generally relied upon. If feed ingredients and (or) feed additives are to be used with greater regularity and reliability, then it is necessary to better understand the mechanisms whereby antibiotics and minerals such as ZnO influence animal physiology, in conjunction with the use of

Lipases industrial applications: focus on food and agroindustries

Directory of Open Access Journals (Sweden)

Guerrand David

2017-07-01

Full Text Available Enzymes developed and produced for industrial applications represent a market estimated at a global value comprised between $5000 million and $5500 million in 2016. The major applications for industrial enzymes include food and beverages (dairy, bakery, fruit juices, beer, wine, detergents, biofuel productions, animal feed, and other applications such as textiles, leather, and paper processing. Altogether, food and feed applications account for 55–60% of the global enzymes market, and market is still growing at an estimated 6–8% annual growth. The lipases category represents less than 10% of the global enzymes market, with a broad range of industrial applications: detergents, oil processing, food processing and pharmaceutical end-users. Existing applications and new development in the food and agroindustries sectors are reviewed.

Seismic Qualification of Auxiliary Feed Water Control Valve

International Nuclear Information System (INIS)

Hwang, K. M.; Jang, J. B.; Kim, J. K.; Suh, Y. P.

2006-01-01

Although domestic nuclear power industry has almost accomplished technical independence, Auxiliary Feed Water Control Valve (AFWCV) is still depending on import. In order to jump to advanced nation in nuclear power industry, it is very important to achieve technical independence in designing and manufacturing AFWCV. At last, AFWCV is self-manufactured using the domestic technology under the financial support of the government. Therefore, the seismic qualification is carried out to verify the safety and operability of AFWCV against the earthquake in this study

Motivation of hens to obtain feed during a molt induced by feed withdrawal, wheat middlings, or melengestrol acetate.

Science.gov (United States)

Koch, J M; Lay, D C; McMunn, K A; Moritz, J S; Wilson, M E

2007-04-01

Traditionally, molting was initiated by withdrawing feed. However, public criticism of feed deprivation, based on the perception that it inhumanely increases hunger, has led the poultry industry to ban the practice. Thus far, alternatives have not been demonstrated to ameliorate the increase in hunger that led to the ban on inducing molting by feed deprivation. Incorporating melengestrol acetate (MGA), an orally active progestin, into a balanced layer diet induces molting and increases postmolt egg quality. Hy-Line W-98 hens (n = 60) were randomly assigned to a balanced layer ration (control), a balanced layer ration containing MGA, or a 94% wheat middlings diet (wheat) for 20 d, or were feed deprived for 8 d. Hens were trained to peck a switch to receive a feed reward based on a progressive ratio reinforcement schedule. Motivation of hens to acquire feed was measured as the total number of pecks recorded in 15 min on d 0, 4, 8, 12, 16, and 20. On d 20, abdominal fat pad and digesta-free gizzards were weighed. The number of pecks in the feed-deprived group was greater than controls by d 4 and remained greater at d 8, when these hens were removed from the experiment. Hens in the wheat group that were rewarded with a layer diet pecked more than controls from d 8 to 20. Hens in the MGA group pecked for a reward at the same rate as control hens throughout the experiment. Hens fed the wheat diet had heavier gizzards compared with control and MGA-fed hens. Hens fed MGA had greater abdominal fat pad compared with wheat and control hens. Hens molted using a diet containing MGA have a similar motivation to obtain feed as control hens; therefore, this alternative does not appear to increase hunger. However, hens molted with a wheat middling diet appear to be as motivated to obtain feed as did the feed-deprived hens.

Alternative Raw Materials for Animal Feed

Directory of Open Access Journals (Sweden)

A R Alimon

2009-06-01

Full Text Available The increase in world fuel prices in the last few years has charged the global animal feedstuffs. In Malaysia, the feed industry is dependent on the importation of corn and soybean meal as the poultry and swine industries are almost totally based on corn soya bean meal diets. However, there are many byproducts and coproducts available in Malaysia as alternatives to corn or soy bean. Since Malaysia has more than 4 million hectares of oil palm plantation and after processing for the oil, large quantities of several byproducts are produced. This paper describes several available byproducts and co products in Malaysia, their nutritive value and their problems.

[Animal feeding and feed legislation after the detection of the first indigenous BSE cases in Germany].

Science.gov (United States)

Kamphues, J

2002-08-01

In Great Britain, even the earliest tangible signs indicating the epidemiologic significance of meat and bone meal in the spreading of BSE soon gave rise to increasingly rigorous legislative measures regulating animal feedstuffs. In 1994 a ban on the feeding of animal proteins to ruminants was implemented throughout the entire EU. But until the first BSE cases were actually confirmed in locally raised cattle (November 2000), feeding practice and legislation more or less in Germany remained unaffected by the efforts undertaken in Great Britain. This situation was suddenly changed on 1 December, 2000, when the so-called "Verfütterungsverbot" was put into effect, a law which drastically extended bans regarding the feedstuffs (including fishmeal and animal fats) as well as the species concerned (all animals used in food production). In 2001 the "contamination" phenomenon (ingredients of animal origin were detected in mixed feeds) became a vital issue for the feed industry; through the media, the subject "feedstuff safety" gained a previously unseen level of public awareness. Those circles concerned with mixed feed production and animal husbandry were increasingly confronted with the consequences of the "Verfütterungsverbot" (availability and pricing of substitute ingredients; the demand for amino acids and inorganic sources of phosphorus; problems finding adequate substitutes for animal fats; poor digestibility of alternative components such as indigenous legumes or vegetable fats in calf diets; lower utilization rate of original phosphorus in mixed feeds with negative consequences for skeletal development). With the conditional approval of fishmeal (except in feeds for ruminants) the situation has eased again to a certain degree; on the EU level there are increasing signals pointing toward a political intention to reinstate the utilization of by-products of slaughtered animals qualified for human consumption (with the exception of fallen/dead animals and specific

Proximate analyses - Utilization of Marine Process Waste for Aquaculture Feeds

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Limited amounts of forage fish are available as an ingredient in feeds for the expanding aquaculture industry. Work is being conducted on a variety of underutilized...

Survival potential of wild type cellulose deficient Salmonella from the feed industry

Directory of Open Access Journals (Sweden)

Ballance Simon

2009-11-01

Full Text Available Abstract Background Biofilm has been shown to be one way for Salmonella to persist in the feed factory environment. Matrix components, such as fimbriae and cellulose, have been suggested to play an important role in the survival of Salmonella in the environment. Multicellular behaviour by Salmonella is often categorized according to colony morphology into rdar (red, dry and rough expressing curli fimbriae and cellulose, bdar (brown, dry and rough expressing curli fimbriae and pdar (pink, dry and rough expressing cellulose. The aim of the study was to look into the distribution of morphotypes among feed and fish meal factory strains of Salmonella, with emphasis on potential differences between morphotypes with regards to survival in the feed factory environment. Results When screening a total of 148 Salmonella ser. Agona, Salmonella ser. Montevideo, Salmonella ser. Senftenberg and Salmonella ser. Typhimurium strains of feed factory, human clinical and reference collection origin, as many as 99% were able to express rough morphology (rdar or bdar. The dominant morphotype was rdar (74%, however as many as 55% of Salmonella ser. Agona and 19% of Salmonella ser. Senftenberg displayed the bdar morphology. Inconsistency in Calcofluor binding, indicating expression of cellulose, was found among 25% of all the strains tested, however Salmonella ser. Agona showed to be highly consistent in Calcofluor binding (98%. In biofilm, Salmonella ser. Agona strains with bdar mophology was found to be equally tolerant to disinfection treatment as strains with rdar morphotype. However, rdar morphology appeared to be favourable in long term survival in biofilm in a very dry environment. Chemical analysis showed no major differences in polysaccharide content between bdar and rdar strains. Our results indicate that cellulose is not a major component of the Salmonella biofilm matrix. Conclusion The bdar morphotype is common among Salmonella ser. Agona strains isolated

Die Hard - improving the physical quality of extruded fish feed pellets

DEFF Research Database (Denmark)

Dethlefsen, Markus Wied

The present thesis, Die Hard – Improving the Physical Quality of Extruded Fish Feed Pellets, approaches some of the biggest challenges within production of high-performance feed: Oil leakage and pellet strength. Salmon farmers in the aquaculture industry are requesting high energy dense diets...... with a supreme physical quality. To fulfil the market expectations, feed pellets have to contain 40% fat and tolerate high levels of stress during the transportation to the fish cages – without the pellets crumbling and oil leaking out of the feed. To solve this task, an improved understanding of the pellet...... structure’s impact on the physical quality of the feed is required. Through detailed analyses of the pellets’ microstructure, it was found that the optimal pore structure is defined by a high pore-surface-area to object-volume ratio. To obtain this pore structure, a new generation of dies was developed...

Evaluating by-products of the Atlantic shellfish industry as alternative feed ingredients for laying hens.

Science.gov (United States)

Langille, M A; Anderson, D M; MacIsaac, J L

2012-09-01

A full-cycle laying hen study was conducted to evaluate crab meal (CM) and lobster meal (LM) as feed ingredients for laying hens by assigning four hundred thirty-two 35-wk-old White Leghorns to 1 of 6 diets [control, 2.5% CM, 2.5% LM, 5% CM, 5% LM, and 2.5% CM + 2.5% LM (blend)]. Productive performance and egg parameters were evaluated every 28-d period. Eggs were collected at 67 wk of age from the 5% CM, 5% LM, and blend treatments for analysis of yolk fatty acid composition. At 55 and 67 wk of age, ulnas were collected to determine breaking strength, percent ash, and calcium. Body weights, feed consumption, hen-day production, feed efficiency, and egg quality were not affected (P > 0.05) by treatment. The L* scores of eggs from 5% CM, 5% LM, and blend were lower (P 0.05) any of the bone parameters measured at 55 and 67 wk of age. CM and LM supported similar egg production, feed efficiency, egg yolk color, adequate bone strength, and the incorporation of DHA into egg yolks.

The Advantage and Limitation of Agriculture Byproduct and Feeding Strategy Based on Agriculture Byproduct for Beef Cattle

Directory of Open Access Journals (Sweden)

Mariyono

2009-03-01

Full Text Available Feed supply is getting limited since the use of land for forages has been replaced by building industries big plantation, agriculture. Sustainable integration between animal and food crop and plantation is efficient and gives advantage for both. Rice, cassava soybean, groundnut, palm oil, coconut, coffee, cocoa and sugar cane are food crop and plantation which their byproducts are generally used or modified/processed for ruminant production. This paper describes optimization on the use of these byproducts to decrease feed cost without ignoring the feed quality. These byproducts have special characteristic and limitation with fluctuated price. Their nutritive values vary and they can be grouped into fiber, fiber-energy, fiber-protein, protein or energy sources. Therefore, special strategy for each location and purpose of livestock industry is required to get an efficient and optimal feed composition.

Review: Feed demand landscape and implications of food-not feed strategy for food security and climate change.

Science.gov (United States)

Makkar, H P S

2017-12-04

The food-feed competition is one of the complex challenges, and so are the ongoing climate change, land degradation and water shortage for realizing sustainable food production systems. By 2050 the global demand for animal products is projected to increase by 60% to 70%, and developing countries will have a lion's share in this increase. Currently, ~800 million tonnes of cereals (one-third of total cereal production) are used in animal feed and by 2050 it is projected to be over 1.1 billion tonnes. Most of the increase in feed demand will be in developing countries, which already face many food security challenges. Additional feed required for the projected increased demand of animal products, if met through food grains, will further exacerbate the food insecurity in these countries. Furthermore, globally, the production, processing and transport of feed account for 45% of the greenhouse gas emissions from the livestock sector. This paper presents approaches for addressing these challenges in quest for making livestock sector more sustainable. The use of novel human-inedible feed resources such as insect meals, leaf meals, protein isolates, single cell protein produced using waste streams, protein hydrolysates, spineless cactus, algae, co-products of the biofuel industry, food wastes among others, has enormous prospects. Efficient use of grasslands also offers possibilities for increasing carbon sequestration, land reclamation and livestock productivity. Opportunities also exist for decreasing feed wastages by simple and well proven practices such as use of appropriate troughs, increase in efficiency of harvesting crop residues and their conversion to complete feeds especially in the form of densified feed blocks or pellets, feeding as per the nutrient requirements, among others. Available evidence have been presented to substantiate arguments that: (a) for successful and sustained adoption of a feed technology, participation of the private sector and a sound

Use of rice protein concentrate in rainbow trout feeding: preliminary results

Directory of Open Access Journals (Sweden)

I. Zoccarato

2010-01-01

Full Text Available During the past decades, the fishery industry has excessively used the world fish captures to produce fishmeal and fish oil in order to prepare feed for aquaculture diets. This has led to a drastic reduction of several fish populations (Hardy, 1999; FAO, 1999. At present 70% of the oil and 34% of fishmeal obtained from captures are used for aquaculture industry and, if the aquaculture production will continue to increase as predicted, in a short time it will absorb the entire world oil and fish meal production. Moreover, since fish meal still constitutes an important part of the feed formula for cultivated fish and since a further increase of fish meal availability will not be possible (Hardy, 2001, its price is expected to continue to increase (Tacon, 1998.

Uranium industry annual 1996

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-04-01

The Uranium Industry Annual 1996 (UIA 1996) provides current statistical data on the US uranium industry`s activities relating to uranium raw materials and uranium marketing. The UIA 1996 is prepared for use by the Congress, Federal and State agencies, the uranium and nuclear electric utility industries, and the public. Data on uranium raw materials activities for 1987 through 1996 including exploration activities and expenditures, EIA-estimated reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities for 1994 through 2006, including purchases of uranium and enrichment services, enrichment feed deliveries, uranium fuel assemblies, filled and unfilled market requirements, uranium imports and exports, and uranium inventories are shown in Chapter 2. A feature article, The Role of Thorium in Nuclear Energy, is included. 24 figs., 56 tabs.

Optimization of arc-start performance by wire-feeding control for GMA welding

Energy Technology Data Exchange (ETDEWEB)

Kang, Jong Gu; Ryu, Gyeong Su; Rhee, Se Hun [Hanyang University, Seoul (Korea, Republic of); Kim, Dong Cheol; Kang, Mun Jin [Korea Institute of Industrial Technology, Incheon (Korea, Republic of); Park, Young Whan [Pukyong National University, Busan (Korea, Republic of)

2013-02-15

The wire feeding system for gas metal arc welding usually consists of a wire feeder and a torch. In many industries, the distance between the wire feeder and the torch is generally 3 m to 5 m. In a conventional wire feeder, a direct current (DC) motor is used for wire feeding. However, a significant problem with this system is the impossibility of feedback control because of inner or outer impedance. In this paper, a digital wire feeder was developed by using a DC encoder motor and a push-pull torch. An optimized wire-feeding system was also developed by experiment. The welding process was observed using a high-speed camera. The resulting wire-feeding system exhibits low spatter generation and arc stability.

A review of feed efficiency in swine: biology and application.

Science.gov (United States)

Patience, John F; Rossoni-Serão, Mariana C; Gutiérrez, Néstor A

2015-01-01

Feed efficiency represents the cumulative efficiency with which the pig utilizes dietary nutrients for maintenance, lean gain and lipid accretion. It is closely linked with energy metabolism, as the oxidation of carbon-containing components in the feed drive all metabolic processes. While much is known about nutrient utilization and tissue metabolism, blending these subjects into a discussion on feed efficiency has proven to be difficult. For example, while increasing dietary energy concentration will almost certainly increase feed efficiency, the correlation between dietary energy concentration and feed efficiency is surprisingly low. This is likely due to the plethora of non-dietary factors that impact feed efficiency, such as the environment and health as well as individual variation in maintenance requirements, body composition and body weight. Nonetheless, a deeper understanding of feed efficiency is critical at many levels. To individual farms, it impacts profitability. To the pork industry, it represents its competitive position against other protein sources. To food economists, it means less demand on global feed resources. There are environmental and other societal implications as well. Interestingly, feed efficiency is not always reported simply as a ratio of body weight gain to feed consumed. This review will explain why this arithmetic calculation, as simple as it initially seems, and as universally applied as it is in science and commerce, can often be misleading due to errors inherent in recording of both weight gain and feed intake. This review discusses the importance of feed efficiency, the manner in which it can be measured and reported, its basis in biology and approaches to its improvement. It concludes with a summary of findings and recommendations for future efforts.

Insects as food and feed: from production to consumption

NARCIS (Netherlands)

Huis, van Arnold; Tomberlin, Jeffery K.

2017-01-01

Alternative protein sources are urgently required as the available land area is not sufficient to satisfy the growing demand for meat. Insects have a high potential of becoming a new sector in the food and feed industry, mainly because of the many environmental benefits when compared to meat

The deep processing of seaweed industrial waste--Influence of several fermentation on seaweed waste of feed

Science.gov (United States)

Zhao, Shipeng; Zhang, Shuping

2018-02-01

This paper focuses on several factors on the effects of fermented seaweed feed, and obtains the optimal fermentation process through the analysis of nutrients. Through the experiment we can get, Seaweed waste fermented the best feed when adding 1% of microbial agents and 0.5% of corn powder, fermenting for 15 days.

Trickle Bed Reactor Operation under Forced Liquid Feed Rate Modulation

Czech Academy of Sciences Publication Activity Database

Hanika, Jiří; Jiřičný, Vladimír; Karnetová, P.; Kolena, J.; Lederer, J.; Skála, D.; Staněk, Vladimír; Tukač, V.

2007-01-01

Roč. 13, č. 4 (2007), s. 192-198 ISSN 1451-9372 R&D Projects: GA MPO(CZ) FT-TA/039 Institutional research plan: CEZ:AV0Z40720504 Keywords : trickle -bed reactor * period * feed rate Subject RIV: CI - Industrial Chemistry, Chemical Engineering

FUNCTION FEED ADDITIVE OF CAROTE-NOID VEGETABLE RAW MATERIALS FOR POULTRY

OpenAIRE

Koshchayev A. G.; Kalyuzhniy S. A.; Koshchaeva O. V.; Gavrilenko D. V.; Eliseev M. A.

2013-01-01

The article is concerned with the use of functional feed additives from pumpkin fruits and alfalfa juice for the poultry industry. In the study of laying hen it has been found that the use of a feed additive in-creased pumpkin paste content in serum and egg yolk carotenoids is more than two times, and the concentration of vitamin A in these tissues increased slightly, not exceeding 20%. Livability and productivity of poultry increased and average expendable fodder per head per day decreased. ...

78 FR 68461 - Guidance for Industry: Studies To Evaluate the Utility of Anti-Salmonella Chemical Food Additives...

Science.gov (United States)

2013-11-14

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-1994-D-0007] Guidance for Industry: Studies To Evaluate the Utility of Anti- Salmonella Chemical Food Additives in Feeds... Industry: Studies to Evaluate the Utility of Anti-Salmonella Chemical Food Additives in Feeds,'' and is...

The Prospect of Using Complete Feed in Goat Production: A Review on its Utility and Physical Form and Animal Responses

Directory of Open Access Journals (Sweden)

Simon P Ginting

2009-06-01

Full Text Available Complete feed is a strategic feeding system that has been widely adopted by the dairy cattle industry, but it has been rarely practised in goat enterprises. The prospect of using complete feed for goat production could be considered from two aspects, namely 1 its relevancy to the goat metabolic requirement, and 2 its potential as an effective means for maximal utilization of crop residues and agro-industrial byproducts as alternative feeds. Metabolically, the higher energy requirement and the lower gut capacity of goats due to its relatively smaller body size make this animal more adapted to feedstuffs with denser nutrient contents as typified by the complete feed. As complete feed is characteristically dry, it has potential to cause hypovolemia and induce later a lower feed consumption when fed to goats. But, this event occurs only during the initial meal and the condition returns to the normal state thereafter. Total saliva secretion tend to decrease by consuming dry feed which can cause parakeratosis, laminitis or acidosis. However, these metabolic disorder could be prevented by formulating complete feed with optimal roughage/concentrate ratio. Review from literatures showed that, when used in complete feed, the inclusion rate of several low palatability crop residues or agro-industrial ranged from 15 to 60%. The roughage/concentrate ratio was in the range of 0.25 to 3.0. Some physical characteristics are important for effective complete feed such as the particle size of roughage, the content of physically effective fibre and the form of the complete feed. Complete feed processed into pellet generally resulted in better performances. The ME and CP content of complete feed used ranged from 1800 to 2800 kcal/kg DM and from 15 to 20%, respectively. The rate of feed intake by goats receiving complete feed ranged from 2.0 to 4.9% BW, the ADG ranged from 40 to 145 g, FCR ranged from 5.2 to 13.0 and DM digestibility ranged from 62 to 81%. These

East African Journal of Sciences (2007) Volume 1 (1) 45-54 Feed ...

African Journals Online (AJOL)

industrial by-products as supplementary feeds may be a feasible ... commercial production and at the same time converting non-edible .... (1991). Gas production (GP) was ... the gas production technique (Menke and Steingass, 1988) as:.

ECONOMIC ESSENCE OF MODERN INVESTMENT PROCESSES IN THE GRAIN PROCESSING INDUSTRY

Directory of Open Access Journals (Sweden)

Inna Kanashkina

2015-11-01

Full Text Available The subject of the research is theoretical and methodological bases of formation of effective investment in priorities feed processing industry in Ukraine. The object of research is the investment process in feed processing Ukrainian industry, the main direction and the way to increase the efficiency of the investment process in the industry. The aim is to develop an integrated approach to the study of the economic substance of investments to improve the methods to determine their effectiveness, the study of factors of investment environment, study methodology for determining business risk, development of proposals of the priority areas of investing in feed processing industry, the formation of effective investment strategies for its development in the conditions of market transformation. Methods. We used the following methods: dialectical, abstract logic, Economics and Statistics and the systemic-functional methods of knowledge of economic processes. The dialectical method has allowed the author to analyze the development of research in the last five years, identified reserves and propose ways for its further development. Abstract-logical method of waste classification of the factors influencing the efficiency of the investment process in the industry, the methodological approaches to the formation of the components of the conceptual apparatus studied category. Economic-statistical method used in the study and synthesis of trends and patterns of the dynamics of the industry at the present stage. Systemic-functional method allowed to generalize the theoretical and methodological foundations of development effectiveness feed processing industry. The study also used methods: a comparative analysis – for comparing actual data reporting and previous years; model approach – to determine the entrepreneurial risk in the enterprises of the industry; expert assessments and cost approaches to identify key trends and ways to improve the country�

Effective utilization of distiller's grain soluble-an agro-industrial waste in the feed of cage-reared minor carp Labeo bata in a tropical reservoir, India.

Science.gov (United States)

Hassan, M A; Aftabuddin, Md; Meena, D K; Mishal, P; Gupta, S Das

2016-08-01

A 60-day feeding trial was conducted to evaluate the efficacy of distiller's grain soluble (brewery waste) as a prospective ingredient to substitute expensive and high demand feed component, soybean meal for farming Labeo bata in cages installed in tropical reservoir. Two isonitrogenous and isocaloric diets comprising brewery waste (49.2 % CP) as test diet and soybean meal (44.4 % CP) as reference diet were formulated and extruded to obtain 2-mm floating pellets. The efficacy of the diets was tested in terms of survival (%), live weight gain (%), SGR (%/day), FCR, PER and ANPU and recorded 65 ± 0.2, 96 ± 8.1, 1.9 ± 0.1, 2.5 ± 0.02, 1.4 ± 0.1, 20.3 ± 2.0 and 66 ± 0.6, 112 ± 9.8, 2.2 ± 0.1, 2.2 ± 0.2, 1.6 ± 0.1 and 20 ± 2.1, respectively, for soybean and brewer's waste-based formulated feed. The analyses of results revealed that survival, growth parameters and biochemical composition of whole body tissue did not differ significantly (p > 0.05) despite complete replacement of soybean meal by brewery waste. However, the cost estimate of diet revealed marked reduction of feed cost of Rs. 9.2/kg (33.8 %) in the test diet as compared to the reference diet. The study suggests that brewery waste could effectively replace soybean meal without effecting survival and growth of the fish. The finding thus may pave a productive way for reducing environmental pressure of disposal of an agro-industrial waste.

Uranium industry annual 1996

International Nuclear Information System (INIS)

1997-04-01

The Uranium Industry Annual 1996 (UIA 1996) provides current statistical data on the US uranium industry's activities relating to uranium raw materials and uranium marketing. The UIA 1996 is prepared for use by the Congress, Federal and State agencies, the uranium and nuclear electric utility industries, and the public. Data on uranium raw materials activities for 1987 through 1996 including exploration activities and expenditures, EIA-estimated reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities for 1994 through 2006, including purchases of uranium and enrichment services, enrichment feed deliveries, uranium fuel assemblies, filled and unfilled market requirements, uranium imports and exports, and uranium inventories are shown in Chapter 2. A feature article, The Role of Thorium in Nuclear Energy, is included. 24 figs., 56 tabs

Principles of commercially available pretreatment and feeding equipment for baled biomass

Energy Technology Data Exchange (ETDEWEB)

Koch, T. [Thomas Koch Energi, Vanloese (Denmark); Hummelshoej, R.M. [COWIconsult, Lyngby (Denmark)

1993-12-31

During the last 15 years, there has been a growing interest in utilizing waste biomass for energy production in Denmark. Since 1990, it has been unlawful to burn surplus straw on open land. Before the year 2000, it is intended to utilize most of the 2--3 million tons of surplus straw as an energy resource. The type of plants that were built in the beginning were combustion plants for district heating. The feeding equipment for these plants has been developed to an acceptable standard. Later, combustion plants for combined heat and power production based on a steam turbine were introduced. This type of plant demands a much greater continuity in the fuel flow, and the consequences of minor discontinuities are to be dropped from the grid. Gasification and pyrolysis demands a high sealing ability of the feeding equipment, because of the explosive and poisonous gas in the plant and a need for a very high continuity in the fuel feed. The first plants were built with the equipment and experiences from the farming industries, which have a long tradition in working with biomass-handling. The experiences gained with this type of equipment were not very promising, and in the early eighties, a more industrial type of biomass-handling equipment was developed. This paper presents the principles of the heavy-duty biomass pretreatment and feeding equipment that was commercially available in Denmark in May, 1993.

Fish consumption and track to a fish feed formulation

Science.gov (United States)

Cai-Juan, Soong; Ramli, Razamin; Rahman, Rosshairy Abdul

2015-12-01

Strategically located in the equator, Malaysia is blessed with plenty of fish supply. The high demand in fish consumption has helped the development in the fishery industry and provided numerous jobs in the secondary sector, contributing significantly to the nation's income. A survey was conducted to understand the trend of current demands for fish for the purpose of designing a feed formulation, which is still limited in this area of study. Results showed that grouper fish in restaurants commanded a very high price compared to other species of fish. Tiger grouper gained the highest demand in most restaurants, while giant grouper had the highest price in restaurants. Due to the demand and challenges to culture this type of fish, a framework for fish feed formulation is proposed. The formulation framework when materialized could be an alternative to the use of trash fish as the feed for grouper.

Monitoring the prevalence of genetically modified maize in commercial animal feeds and food products in Turkey.

Science.gov (United States)

Turkec, Aydin; Lucas, Stuart J; Karlık, Elif

2016-07-01

EU legislation strictly controls use of genetically modified (GM) crops in food and feed products, and requires them to be labelled if the total GM content is greater than 9 g kg(-1) (for approved GM crops). We screened maize-containing food and feed products from Turkey to assess the prevalence of GM material. With this aim, 83 food and feed products - none labelled as containing GM material - were screened using multiplex real-time polymerase chain reaction (PCR) for four common GM elements (35S/NOS/bar/FMV). Of these, 18.2% of feeds and 6% of food samples tested positive for one or more of these elements, and were subjected to event-specific PCR to identify which GM organisms they contained. Most samples were negative for the approved GM events tested, suggesting that they may contain adventitious GM contaminants. One sample was shown to contain an unapproved GM event (MON810, along with GA21) at a concentration well above the statutory labelling requirement. Current legislation has restricted the penetration of GM maize into the Turkish food industry but not eliminated it, and the proliferation of different GM events is making monitoring increasingly complex. Our results indicate that labelling requirements are not being followed in some cases. © 2015 Society of Chemical Industry. © 2015 Society of Chemical Industry.

Overview of FEED, the feeding experiments end-user database.

Science.gov (United States)

Wall, Christine E; Vinyard, Christopher J; Williams, Susan H; Gapeyev, Vladimir; Liu, Xianhua; Lapp, Hilmar; German, Rebecca Z

2011-08-01

The Feeding Experiments End-user Database (FEED) is a research tool developed by the Mammalian Feeding Working Group at the National Evolutionary Synthesis Center that permits synthetic, evolutionary analyses of the physiology of mammalian feeding. The tasks of the Working Group are to compile physiologic data sets into a uniform digital format stored at a central source, develop a standardized terminology for describing and organizing the data, and carry out a set of novel analyses using FEED. FEED contains raw physiologic data linked to extensive metadata. It serves as an archive for a large number of existing data sets and a repository for future data sets. The metadata are stored as text and images that describe experimental protocols, research subjects, and anatomical information. The metadata incorporate controlled vocabularies to allow consistent use of the terms used to describe and organize the physiologic data. The planned analyses address long-standing questions concerning the phylogenetic distribution of phenotypes involving muscle anatomy and feeding physiology among mammals, the presence and nature of motor pattern conservation in the mammalian feeding muscles, and the extent to which suckling constrains the evolution of feeding behavior in adult mammals. We expect FEED to be a growing digital archive that will facilitate new research into understanding the evolution of feeding anatomy.

Co-feeding strategy to enhance phytase production in Pichia pastoris

African Journals Online (AJOL)

The experimental designs, the methanol/L-alanine co-feeding strategy and optimization of phytase production by P. pastoris supported by the optimum levels of variables and lower temperature expression produced high level of phytase activity which could be scaled up to produce phytase for food additives at industrial ...

Effect of feed presentation on feeding patterns of dairy calves.

Science.gov (United States)

Miller-Cushon, E K; Bergeron, R; Leslie, K E; Mason, G J; DeVries, T J

2013-01-01

The objectives of this study were to determine the effect of feed presentation on meal frequency and duration, as well as diurnal feeding patterns of dairy calves, and to assess any longer-term differences in feeding patterns resulting from previous experience. Twenty Holstein bull calves were exposed from wk 1 to 8 of life to 1 of 2 feed presentation treatments: concentrate and chopped grass hay (Feed was provided ad libitum. Calves received 8L/d of milk replacer (1.2 kg of dry matter), with the amount progressively reduced after 5 wk to facilitate weaning by the end of wk 7. At the beginning of wk 9, all calves received the MIX diet and remained on trial for an additional 3 wk. Feeding behavior was recorded from video for 4d during wk 6, 8, 9, and 11. In wk 6, calves fed MIX spent more time feeding than calves fed COM (56.7 vs. 46.8 min/d). In wk 8, calves fed MIX spent more time feeding (174.0 vs. 139.1 min/d) and had a lower rate of intake (11.5 vs. 14.7 g/min) compared with calves fed COM. Meal frequency was similar between treatments (12.2 meals/d). Diurnal feeding patterns in wk 8 were also affected by feed presentation, with calves fed MIX spending less time feeding at time of feed delivery and more time feeding throughout the rest of the daylight hours than calves fed COM. Diurnal feeding patterns of hay and concentrate in wk 8 differed for calves fed COM, with more time spent consuming hay at time of feed delivery and less time spent consuming hay throughout the rest of the day. Once calves previously fed COM were transitioned to the MIX diet in wk 9, meal frequency, meal duration, and diurnal feeding patterns were similar between treatments: both treatments spent similar amounts of time feeding (173.9 min/d) and had similar peaks in feeding activity at time of feed delivery, sunrise, and sunset. Provision of hay and concentrate to young calves as a mixed ration, compared with separate components, increases time spent feeding and results in more evenly

Dioxin monitoring in fats oils for the feed industry

NARCIS (Netherlands)

Asselt, van E.D.; Sterrenburg, P.

2011-01-01

The aim of the present project was to determine the most critical steps in the production of fats and oils. First, production processes of vegetables oils, animal fat, fish oil, biodiesel and fat blending were studied and experts from the industry as well as in-house dioxin experts were consulted to

Fermented liquid feed - Microbial and nutritional aspects and impact on enteric diseases in pigs

DEFF Research Database (Denmark)

Canibe, Nuria; Jensen, Bent Borg

2012-01-01

The use of liquid feed in pig nutrition has recently gained interest due to several reasons: (1) the political wish of decreasing the use of antibiotics in pig production; (2) the current fluctuations in feed prices what makes liquid feed, with the possibility of using cheap liquid ingredients......, an interesting feeding strategy; (3) the policies aiming at increasing production of renewable biofuel with a corresponding increase in liquid co-products from the bioethanol industry, suitable for liquid feeding; (4) environmental policies aiming at decreasing disposal of waste, for example, liquid co-products...... mixture. Several factors affect the microbial and nutritional characteristics of the final product and therefore knowledge on the impact of these factors on the characteristics of the mixture is crucial. The initial hours of incubation are characterized by high pH, low numbers of lactic acid bacteria...

Role of the central R&D laboratories of an international group in the field of Food-Feed Safety

Directory of Open Access Journals (Sweden)

Kovari Katalin

2000-09-01

Full Text Available With increased globalisation and more frequent crises within food/feed industry, public concern over food safety will remain at its present level and may even increase. The crushing/refining industry is likely to face further problems in the future. The recently established Food/Feed Safety Coordination Committee will be able to deal with any new crises at group level (communication, action organisation, in close cooperation with R&D, which in turn will provide the scientific background, analytical results, proposals for technical solutions and continuous monitoring, for any given situation.

'Life does not make it easy to breast-feed': using the socio-ecological framework to determine social breast-feeding obstacles in a low-income population in Tijuana, Mexico.

Science.gov (United States)

Bueno-Gutierrez, Diana; Chantry, Caroline

2015-12-01

Breast-feeding rates reflect sociodemographic discrepancies. In Mexico, exclusive breast-feeding under 6 months of age has deteriorated among the poor, rural and indigenous populations from 1999 to 2012. Our objective of the present study was to identify the main social obstacles to breast-feeding in a low-income population in Tijuana, Mexico. Qualitative study using a socio-ecological framework for data collection. Low-income communities in Tijuana, Mexico. Mothers (n 66), fathers (n 11), grandparents (n 27) and key informants (n 25). One hundred and twenty-nine individuals participated in the study: six focus groups (n 53) and fifty-one interviews among mothers, fathers and grandparents; and twenty-five interviews among key informants. Seven social themes were identified: (i) embarrassment to breast-feed in public; (ii) migrant experience; (iii) women's role in society; (iv) association of formula with higher social status; (v) marketing by the infant food industry; (vi) perception of a non-breast-feeding culture; and (vii) lack of breast-feeding social programmes. Socio-structural factors influence infant feeding practices in low-income communities in Tijuana. We hypothesize that messages emphasizing Mexican traditions along with modern healthy practices could help to re-establish and normalize a breast-feeding culture in this population. The target audience for these messages should not be limited to mothers but also include family, health-care providers, the work environment and society as a whole.

Applicability of in silico genotoxicity models on food and feed ingredients.

Science.gov (United States)

Vuorinen, Anna; Bellion, Phillip; Beilstein, Paul

2017-11-01

Evaluation of the genotoxic potential of food and feed ingredients is required in the development of new substances and for their registration. In addition to in vitro and in vivo assays, in silico tools such as expert alert-based and statistical models can be used for data generation. These in silico models are commonly used among the pharmaceutical industry, whereas the food industry has not widely adopted them. In this study, the applicability of in silico tools for predicting genotoxicity was evaluated, with a focus on bacterial mutagenicity, in vitro and in vivo chromosome damage assays. For this purpose, a test set of 27 food and feed ingredients including vitamins, carotenoids, and nutraceuticals with experimental genotoxicity data was constructed from proprietary data. This dataset was run through multiple models and the model applicability was analyzed. The compounds were generally within the applicability domain of the models and the models predicted the compounds correctly in most of the cases. Although the regulatory acceptance of in silico tools as single data source is still limited, the models are applicable and can be used in the safety evaluation of food and feed ingredients. Copyright © 2017 Elsevier Inc. All rights reserved.

Poultry feed based on protein hydrolysate derived from chrome-tanned leather solid waste: creating value from waste.

Science.gov (United States)

Chaudhary, Rubina; Pati, Anupama

2016-04-01

Leather industry generates huge amount of chrome-containing leather solid waste which creates major environment problems to tanners worldwide. Chrome-tanned leather solid waste is primarily chromium complex of collagen protein. The presence of chromium limits its protein application in animal feed industry. The purified protein hydrolysate with zero chromium could be used in poultry feed. In this study, an attempt has been made to assess performance of poultry with purified protein hydrolysate as a feed derived from chrome-tanned leather waste as partial replacement of soyabean meal as a sole source of protein for growing broiler chickens. Growth study was conducted to evaluate the effect of feeding protein hydrolysate on performance and physiochemical characteristics of meat of broiler chickens. Two experimental diets containing various levels of protein hydrolysate (EI-20 % and EII-30 %) were evaluated. The comparative study was performed as control with soyabean meal. Daily feed intake, body weight gain and feed conversion ratio were measured from day 8 to day 35. At the end of the study, birds were randomly selected and slaughtered to evaluate for physiochemical characteristics of meat. Diet had significant effects on feed intake and body weight gain. Birds fed with 20 and 30 % protein hydrolysate consumed 9.5 and 17.5 % higher amount of feed and gained 6.5 and 16.6 % higher than soyabean meal-fed birds. The current study produced evidence that protein hydrolysate can replace up to 75 % of soyabean meal in broiler diets without affecting either growth performance or meat characteristics.

31 CFR 540.317 - Uranium feed; natural uranium feed.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Uranium feed; natural uranium feed... (Continued) OFFICE OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY HIGHLY ENRICHED URANIUM (HEU) AGREEMENT ASSETS CONTROL REGULATIONS General Definitions § 540.317 Uranium feed; natural uranium feed. The...

Effect of SBR feeding strategy and feed composition on the stability of aerobic granular sludge in the treatment of a simulated textile wastewater.

Science.gov (United States)

Franca, R D G; Ortigueira, J; Pinheiro, H M; Lourenço, N D

2017-09-01

Treatment of the highly polluting and variable textile industry wastewater using aerobic granular sludge (AGS) sequencing batch reactors (SBRs) has been recently suggested. Aiming to develop this technology application, two feeding strategies were compared regarding the capacity of anaerobic-aerobic SBRs to deal with disturbances in the composition of the simulated textile wastewater feed. Both a statically fed, anaerobic-aerobic SBR and an anaerobic plug-flow fed, anaerobic-aerobic SBR could cope with shocks of high azo dye concentration and organic load, the overall chemical oxygen demand and color removal yields being rapidly restored to 80%. Yet, subsequent azo dye metabolite bioconversion was not observed, along the 315-day run. Moreover, switching from a starch-based substrate to acetate in the feed composition deteriorated AGS stability. Overall, the plug-flow fed SBR recovered more rapidly from the imposed disturbances. Further research is needed towards guaranteeing long-term AGS stability during the treatment of textile wastewater.

Gender-specific feeding rates in planktonic copepods with different feeding behavior

DEFF Research Database (Denmark)

van Someren Gréve, Hans; Almeda, Rodrigo; Lindegren, Martin

2017-01-01

Planktonic copepods have sexually dimorphic behaviors, which can cause differences in feeding efficiency between genders. Copepod feeding rates have been studied extensively but most studies have focused only on females. In this study, we experimentally quantified feeding rates of males and females...... copepods, particularly in ambush feeders, where the males must sacrifice feeding for mate searching. We conducted gender-specific functional feeding response experiments using prey of different size and motility. In most cases, gender-specific maximum ingestion and clearance rates were largely explained...... in copepods with different feeding behavior: ambush feeding (Oithona nana), feeding-current feeding (Temora longicornis) and cruising feeding (Centropages hamatus). We hypothesize that carbon-specific maximum ingestion rates are similar between genders, but that maximum clearance rates are lower for male...

Expanding lysine industry: industrial biomanufacturing of lysine and its derivatives.

Science.gov (United States)

Cheng, Jie; Chen, Peng; Song, Andong; Wang, Dan; Wang, Qinhong

2018-04-13

L-Lysine is widely used as a nutrition supplement in feed, food, and beverage industries as well as a chemical intermediate. At present, great efforts are made to further decrease the cost of lysine to make it more competitive in the markets. Furthermore, lysine also shows potential as a feedstock to produce other high-value chemicals for active pharmaceutical ingredients, drugs, or materials. In this review, the current biomanufacturing of lysine is first presented. Second, the production of novel derivatives from lysine is discussed. Some chemicals like L-pipecolic acid, cadaverine, and 5-aminovalerate already have been obtained at a lab scale. Others like 6-aminocaproic acid, valerolactam, and caprolactam could be produced through a biological and chemical coupling pathway or be synthesized by a hypothetical pathway. This review demonstrates an active and expansive lysine industry, and these green biomanufacturing strategies could also be applied to enhance the competitiveness of other amino acid industry.

Valorisation of food waste to produce new raw materials for animal feed.

Science.gov (United States)

San Martin, D; Ramos, S; Zufía, J

2016-05-01

This study assesses the suitability of vegetable waste produced by food industry for use as a raw material for animal feed. It includes safety and nutritional viability, technical feasibility and environmental evaluation. Vegetable by-products were found to be nutritionally and sanitarily appropriate for use in animal feed. The drying technologies tested for making vegetable waste suitable for use in the animal feed market were pulse combustion drying, oven and microwave. The different meal prototypes obtained were found to comply with all the requirements of the animal feed market. An action plan that takes into account all the stages of the valorisation process was subsequently defined in agreement with local stakeholders. This plan was validated in a pilot-scale demonstration trial. Finally, the technical feasibility was studied and environmental improvement was performed. This project was funded by the European LIFE+ program (LIFE09 ENV/ES/000473). Copyright © 2015 Elsevier Ltd. All rights reserved.

Production of astaxanthin rich feed supplement for animals from Phaffia rhodozyma yeast at low cost

Science.gov (United States)

Irtiza, Ayesha; Shatunova, Svetlana; Glukhareva, Tatiana; Kovaleva, Elena

2017-09-01

Dietary nutrients such as amino acids, vitamins, minerals and antioxidants can play a significant role in determining meat quality and also the growth rate of poultry or animal. Phaffia rhodozyma was grown on waste from brewery industry to produce astaxanthin rich feed supplements at a very low cost. Phaffia rhodozyma is yeast specie that has ability to produce carotenoids and approximately 80% of its total carotenoid content is astaxanthin, which is highly valuable carotenoid for food, feed and aquaculture industry. This study was carried out to test yeast extract of spent yeast from brewing industry waste (residual yeast) as potential nitrogen source for growth of Phaffia rhodozyma. Cultivation was carried out in liquid media prepared by yeast extracts and other components (glucose and peptone). Carotenoids from the biomass were released into biomass by suspending cells in DMSO for destruction of cells followed by extraction with petroleum ether. The extracted carotenoids were studied by spectrophotometry to identify and quantify astaxanthin and other carotenoids produced.

Industrial Biotechnology: Discovery to Delivery

Science.gov (United States)

Chotani, Gopal K.; Dodge, Timothy C.; Gaertner, Alfred L.; Arbige, Michael V.

Fermentation products have penetrated almost every sector of our daily lives. They are used in ethical and generic drugs, clinical and home diagnostics, defense products, nutritional supplements, personal care products, food and animal feed ingredients, cleaning and textile processing, and in industrial applications such as fuel ethanol production. Even before knowing about the existence of microorganisms, for thousands of years ancient people routinely used them for making cheese, soy sauces, yogurt, and bread. Although humans have used fermentation as the method of choice for manufacturing for a long time, it is only now being recognized for its potential towards sustainable industrial development.

Energy use in the food manufacturing industry

Energy Technology Data Exchange (ETDEWEB)

Cleland, A.C.; Earle, M.D.

1980-01-01

A survey was conducted to find the level of energy consumption in the food manufacturing industry, which is the food processing industry excluding meat, dairy, and brewing. Data were used from 74 factories. The manufacturing industry was divided into 14 industry groups and the 4 major energy consumers were found to be fruit and vegetable processing, sugar refining, animal feed production, and bread and pastry baking. The present report summarizes results from the survey. It determined the following: the sources of energy used by the insu industry and the annual consumption of each energy form; the consumption of fuel and electricity in the production of the various manufactured food products; the minimum practical energy requirement for processing the various food products; and the potential for conservation and the methods for achieving savings.

Environmental impacts of precision feeding programs applied in pig production.

Science.gov (United States)

Andretta, I; Hauschild, L; Kipper, M; Pires, P G S; Pomar, C

2017-12-04

This study was undertaken to evaluate the effect that switching from conventional to precision feeding systems during the growing-finishing phase would have on the potential environmental impact of Brazilian pig production. Standard life-cycle assessment procedures were used, with a cradle-to-farm gate boundary. The inputs and outputs of each interface of the life cycle (production of feed ingredients, processing in the feed industry, transportation and animal rearing) were organized in a model. Grain production was independently characterized in the Central-West and South regions of Brazil, whereas the pigs were raised in the South region. Three feeding programs were applied for growing-finishing pigs: conventional phase feeding by group (CON); precision daily feeding by group (PFG) (whole herd fed the same daily adjusted diet); and precision daily feeding by individual (PFI) (diets adjusted daily to match individual nutrient requirements). Raising pigs (1 t pig BW at farm gate) in South Brazil under the CON feeding program using grain cultivated in the same region led to emissions of 1840 kg of CO2-eq, 13.1 kg of PO4-eq and 32.2 kg of SO2-eq. Simulations using grain from the Central-West region showed a greater climate change impact. Compared with the previous scenario, a 17% increase in climate change impact was found when simulating with soybeans produced in Central-West Brazil, whereas a 28% increase was observed when simulating with corn and soybeans from Central-West Brazil. Compared with the CON feeding program, the PFG and PFI programs reduced the potential environmental impact. Applying the PFG program mitigated the potential climate change impact and eutrophication by up to 4%, and acidification impact by up to 3% compared with the CON program. Making a further adjustment by feeding pigs according to their individual nutrient requirements mitigated the potential climate change impact by up to 6% and the potential eutrophication and acidification impact

The tissue residues of sodium dehydroacetate used as feed preservative in swine.

Science.gov (United States)

Liu, Hao; Han, Lingling; Xie, Jiayu; Wu, Yingchao; Xie, Yang; Zhang, Yumei

2018-01-01

Sodium dehydroacetate (Na-DHA) is a food and feed additive with antimicrobial effects. There is little information on Na-DHA residue levels in foods derived from animals. In this study, Na-DHA residue levels in swine tissues were determined by HLPC, and the pharmacokinetics of Na-DHA in tissues were determined. The Na-DHA residue levels in swine tissues were liver > muscle > fat. The pharmacokinetics of Na-DHA followed a binomial regression model, and the half-time of Na-DHA in swine tissues was 9.07 days for kidney, 7.19 days for liver, 6.66 days for muscle, and 5.39 days for fat tissue. The accuracy of the HPLC method for Na-DHA determination ranged from 80.18% to 91.33% recovery, with coefficients of variation swine diet is a safe feed additive based on residue elimination and ADI values reported. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

Hydrodynamic aspects of the design of feed heaters and de-aerator storage tanks

International Nuclear Information System (INIS)

Kubie, J.; Rowe, M.; Jones, E.W.

1979-01-01

Regenerative feed heaters of the direct-contact type and feed water deaerators transmit large quantities of saturated, i.e. boiling, water. Drainage of saturated flows has long been a problem because of the possibility of the flow flashing to steam. Adequate drainage of direct-contact heaters is particularly important because of the danger of condensate returning to the turbine and causing serious damage. Likewise, a deaerator must drain easily or the boiler feed pump to which it drains will lose suction head and cavitate. This paper examines a number of hydrodynamic aspects of heater design and operating experience with particular emphasis on the problem of drainage. Formulae are derived and presented with recommendations for their use by designers in the power plant industry. (author)

Ecofeed, animal feed produced from recycled food waste.

Science.gov (United States)

Sugiura, Katsuaki; Yamatani, Shoich; Watahara, Masashi; Onodera, Takashi

2009-01-01

Due to the price hike of imported grains for feed, the production of Ecofeed, feed produced from recycled food waste, has increased in recent years. Food dregs from the food and beverage processing industry and out-of-date food from supermarkets and convenience stores are most often used as raw materials for Ecofeed. As food waste usually contains a lot of moisture and is easily spoiled, guidelines prescribing measures to be taken when collecting, transporting and storing raw materials, and for the production, shipment, storage and use of Ecofeed products, have been developed to ensure the safety of Ecofeed. The guidelines also include measures that should be taken to prevent the spread of bovine spongiform encephalopathy when producing and using Ecofeed. A certification system was introduced in March 2009 to ensure the quality and safety of Ecofeed and thus promote its use.

Kalman filtering applied to a reagent feed system

International Nuclear Information System (INIS)

Griffin, C.D.; Croson, D.V.; Feeley, J.J.

1988-01-01

Using a Kalman filter solves a troublesome measurement noise problem and, at the same time, improves nuclear safety by detecting leaks to the process' feed tanks. To demonstrate how this technology of optimal estimation can be exploited, this article presents a systematic plan and example of how a Kalman filter was proven in industrial use on a reagent analyzer. A process to recycle uranium from spent fuel elements uses a reagent stream containing boron to dissolve the fuel. The boron is the neutron poison that prevents a nuclear chain reaction during the uranium dissolution. The purpose of the Kalman filter for this system is to reduce the uncertainty in the boron concentration measurement. The filter also provides incipient fault detection by estimating the unmeasured state of any unpoisoned solution, which would dilute the boron solution, entering the feed vessel

Foraging response and acclimation of ambush feeding and feeding-current feeding copepods to toxic dinoflagellates

DEFF Research Database (Denmark)

Xu, Jiayi; Nielsen, Lasse Tor; Kiørboe, Thomas

2018-01-01

reticulatum. We hypothesize (1) that ambush feeders are less affected by toxic algae than feeding-current feeders, (2) that copepods acclimate to the toxic algae, and (3) that phytoplankton cells previously exposed to copepod cues elicit stronger responses. Both copepod species consumed the toxic algae...... to examine the response and temporal acclimation (5 d) of two copepods with different foraging behaviors to toxic dinoflagellates. Feeding-current feeding Temora longicornis and ambush feeding Acartia tonsa were offered three strains of toxic Alexandrium tamarense and a nontoxic control Protoceratium...... at a reduced rate and there was no difference in their net-response, but the mechanisms differed. T. longicornis responded in strain-specific ways by reducing its feeding activity, by rejecting captured algae, or by regurgitating consumed cells. A. tonsa reduced its consumption rate, jump frequency, and jump...

Aflatoxin Contamination of Feed Materials in Qom Province, Iran

Directory of Open Access Journals (Sweden)

Mohammad Rezaei

2014-04-01

Full Text Available Background: Aflatoxins are fungal toxins which may be present in some foods and due to their negative health effects, represent a major concern for humans and food industries. In the present study, total aflatoxin contamination in products from eight feed materials production centers located in Qom City of Iran were evaluated by an ELISA technique in November 2012. Methods: A total of 40 feed samples were analyzed for total aflatoxin. The samples were collected randomly from eight feed materials production centers (C1-C8 located in Qom city. Samples were conditioned in sterile plastic container and kept at 4 ᵒC until analyses that were carried out in same day. Results: The total average of Aflatoxins concentration in samples were 1.83µg/kg. All samples demonstrated total aflatoxin levels lower than European Union standard and National Standard of Iran recommended limits. Conclusion: Considering the low values of aflatoxin contamination, maintaining vigilant preventive measures is recommended.These results do not preclude the need for continuing comprehensive studies for aflatoxin contamination.

Uranium industry annual 1994

International Nuclear Information System (INIS)

1995-01-01

The Uranium Industry Annual 1994 (UIA 1994) provides current statistical data on the US uranium industry's activities relating to uranium raw materials and uranium marketing during that survey year. The UIA 1994 is prepared for use by the Congress, Federal and State agencies, the uranium and nuclear electric utility industries, and the public. It contains data for the 10-year period 1985 through 1994 as collected on the Form EIA-858, ''Uranium Industry Annual Survey.'' Data collected on the ''Uranium Industry Annual Survey'' (UIAS) provide a comprehensive statistical characterization of the industry's activities for the survey year and also include some information about industry's plans and commitments for the near-term future. Where aggregate data are presented in the UIA 1994, care has been taken to protect the confidentiality of company-specific information while still conveying accurate and complete statistical data. A feature article, ''Comparison of Uranium Mill Tailings Reclamation in the United States and Canada,'' is included in the UIA 1994. Data on uranium raw materials activities including exploration activities and expenditures, EIA-estimated resources and reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities, including purchases of uranium and enrichment services, and uranium inventories, enrichment feed deliveries (actual and projected), and unfilled market requirements are shown in Chapter 2

Replacement of moist ingredients in the feed training of carnivorous fish

Directory of Open Access Journals (Sweden)

Ana Lúcia Salaro

2012-10-01

Full Text Available The study evaluated the replacement of bovine heart by gelatin in the feed training of carnivorous fish, using giant trahira (Hoplias lacerdae as an experimental model. A completely randomized design with four treatments and five repetitions was employed. The treatments were composed of wet ingredients beef heart (control, gelatin diluted in water, gelatin diluted in beef heart broth, and gelatin diluted in water mixed with fish meal. The fish (3.22±0.03 cm and 0.57±0.01 g were conditioned to accept industrialized diets by the technique of gradual feed ingredients transition in the diet. Gains in weight and length, efficiency of feed training, specific growth rate, cannibalism, mortality and survival rates were evaluated. There was significant difference in weight and length gains and specific growth rate, whereby the use of bovine heart gave the best results. Greater efficiency of feed training was observed for fish fed diets containing beef heart and gelatin diluted in water mixed with fish meal. The high survival rates and the absence of significant differences among treatments for rates of cannibalism, mortality and survival indicate the feasibility of using gelatin as a moist ingredient in the feed training of carnivorous fish.

Genetic variance components for residual feed intake and feed ...

African Journals Online (AJOL)

Feeding costs of animals is a major determinant of profitability in livestock production enterprises. Genetic selection to improve feed efficiency aims to reduce feeding cost in beef cattle and thereby improve profitability. This study estimated genetic (co)variances between weaning weight and other production, reproduction ...

Harmonization of renewable electricity feed-in laws in the European Union

International Nuclear Information System (INIS)

Munoz, Miquel; David Tabara, J.; Oschmann, Volker

2007-01-01

This paper focuses on the harmonization of feed-in laws in the European Union as a support mechanism for the promotion of renewable electricity. In particular, it proposes a methodology for harmonization based on a feed-in law with a modular and transparent premium for renewable electricity producers. This premium considers technology costs, some grid services, political incentives and national priorities. The proposed approach includes flexibility mechanisms to update and revise premiums, to avoid windfall profits for producers, and to share technology innovation benefits with electricity consumers while maintaining incentives for innovation. Our approach is based on the review of the main features of the German and Spanish feed-in laws, and takes into account other necessary considerations for harmonization, such as grid access, funding, definitions and standards, ownership of rights derived from renewables, and exceptions for small non-commercial producers and energy-intensive industries. (author)

Design of a novel automated methanol feed system for pilot-scale fermentation of Pichia pastoris.

Science.gov (United States)

Hamaker, Kent H; Johnson, Daniel C; Bellucci, Joseph J; Apgar, Kristie R; Soslow, Sherry; Gercke, John C; Menzo, Darrin J; Ton, Christopher

2011-01-01

Large-scale fermentation of Pichia pastoris requires a large volume of methanol feed during the induction phase. However, a large volume of methanol feed is difficult to use in the processing suite because of the inconvenience of constant monitoring, manual manipulation steps, and fire and explosion hazards. To optimize and improve safety of the methanol feed process, a novel automated methanol feed system has been designed and implemented for industrial fermentation of P. pastoris. Details of the design of the methanol feed system are described. The main goals of the design were to automate the methanol feed process and to minimize the hazardous risks associated with storing and handling large quantities of methanol in the processing area. The methanol feed system is composed of two main components: a bulk feed (BF) system and up to three portable process feed (PF) systems. The BF system automatically delivers methanol from a central location to the portable PF system. The PF system provides precise flow control of linear, step, or exponential feed of methanol to the fermenter. Pilot-scale fermentations with linear and exponential methanol feeds were conducted using two Mut(+) (methanol utilization plus) strains, one expressing a recombinant therapeutic protein and the other a monoclonal antibody. Results show that the methanol feed system is accurate, safe, and efficient. The feed rates for both linear and exponential feed methods were within ± 5% of the set points, and the total amount of methanol fed was within 1% of the targeted volume. Copyright © 2011 American Institute of Chemical Engineers (AIChE).

Ruminant feeding systems in Southeast Asia

International Nuclear Information System (INIS)

Jalaludin, S.

1989-01-01

Ruminant production in Southeast Asia is not a very large industry but has the potential for expansion because there is an adequate feed supply of conventional and non-conventional types. Grazing ruminants on permanent pasture and wasteland is the most common method of animal management practised by small scale farmers. Programmes to improve pasture in the grazing resources should be implemented. Introducing ruminants into plantations is a viable proposition. Further increases in ruminant productivity can be attained if the technology on utilizing crop residues and by-products can be transferred to farmers and applied more widely. (author). 39 refs, 11 tabs

CONCEPT OF IN-OIL PROJECT BASED ON BIOCONVERSION OF BY-PRODUCTS FROM FOOD PROCESSING INDUSTRY

Directory of Open Access Journals (Sweden)

Wojciech Czekała

2017-09-01

The main assumption of the project is based on the introduction of by-products from the food processing industry to feeding with larvae of H. illucens. Biomass of insect larvae will then be processed into products that will be used for feed and energy purposes.

Bioprocessing papaya processing waste for potential aquaculture feed supplement--economic and nutrient analysis with shrimp feeding trial.

Science.gov (United States)

Kang, H Y; Yang, P Y; Dominy, W G; Lee, C S

2010-10-01

Papaya processing waste (PPW), a major fruit processing waste in the Hawaii islands, served as substrate for yeast (Saccharomyces cerevisiae) growth. The fermented PPW products containing nutrients of 45% crude protein and various fat, fiber, lignin, cellulose, and minerals were advantages to nutrients of yeast alone. Three experimental diets controlled at 35% protein formulation containing different levels of inclusion of PPW products and a commercial control diet were fed to shrimps for 8 weeks. The 50% inclusion of PPW diets were comparable to commercial feed in weight, growth, feed conversion ratio (FCR) and survival rate. Such bioprocess treatment system would be economically feasible with the control of annual cost and increase of the amount of PPW treated. The selling price of PPW products and annual operation and maintenance cost were the most influential factors to additional profits. This study presented a promising alternative for environmental-friendly treatment of organic wastes as well as the sustainability of local agriculture and aquaculture industries. Copyright © 2010 Elsevier Ltd. All rights reserved.

Safety and nutritional assessment of GM plants and derived food and feed: the role of animal feeding trials.

Science.gov (United States)

2008-03-01

, broilers, lactating dairy cows, and fish, comparing the in vivo bioavailability of nutrients from a range of GM plants with their near isogenic counterpart and commercial varieties, showed that they were comparable with those for near isogenic non-GM lines and commercial varieties. In Section 3 toxicological in vivo, in silico, and in vitro test methods are discussed which may be applied for the safety and nutritional assessment of specific compounds present in food and feed or of whole food and feed derived from GM plants. Moreover the purpose, potential and limitations of the 90-day rodent feeding trial for the safety and nutritional testing of whole food and feed have been examined. Methods for single and repeated dose toxicity testing, reproductive and developmental toxicity testing and immunotoxicity testing, as described in OECD guideline tests for single well-defined chemicals are discussed and considered to be adequate for the safety testing of single substances including new products in GM food and feed. Various in silico and in vitro methods may contribute to the safety assessment of GM plant derived food and feed and components thereof, like (i) in silico searches for sequence homology and/or structural similarity of novel proteins or their degradation products to known toxic or allergenic proteins, (ii) simulated gastric and intestinal fluids in order to study the digestive stability of newly expressed proteins and in vitro systems for analysis of the stability of the novel protein under heat or other processing conditions, and (iii) in vitro genotoxicity test methods that screen for point mutations, chromosomal aberrations and DNA damage/repair. The current performance of the safety assessment of whole foods is mainly based on the protocols for low-molecular-weight chemicals such as pharmaceuticals, industrial chemicals, pesticides, food additives and contaminants. However without adaptation, these protocols have limitations for testing of whole food and feed

Characterization of feed channel spacer performance using geometries obtained by X-ray computed tomography

KAUST Repository

Haaksman, Viktor A.; Siddiqui, Amber; Schellenberg, Carsten; Kidwell, James; Vrouwenvelder, Johannes S.; Picioreanu, Cristian

2016-01-01

design from X-ray computed tomography (CT) scans. The method revealed that the filaments of industrial spacers have a highly variable cross-section size and shape, which impact the flow characteristics in the feed channel. The pressure drop and friction

Feed and product for AVLIS

International Nuclear Information System (INIS)

Williams, T.

1991-01-01

Today, fuel cycle organizations around the world, including British Nuclear Fuels, Ltd. (BNFL) are undertaking the development of a new and demanding enrichment technology, customarily referred to by its American Acronym AVLIS (atomic vapor laser isotope separation). Successful commercialization of the technology will threaten established fuel cycle activities and is likely to send shock waves throughout the world industry. The stakes are high for all involved in the civil nuclear industry: do the potential rewards match up? US Department of Energy (US DOE) is regarded as the organization most committed to the early commercialization of AVLIS technology and is aiming to deploy an initial commercial plant within 6 years. However, the timescale is of course subject to a satisfactory technical progress and, no less importantly, continued funding of the necessary development and construction activities. Coupled with the changes that will be needed at the enrichment plant interfaces, the implications for feed supply and product usage, it can be seen that the 1997 target deployment date is an ambitious one. Other organizations are also developing atomic laser enrichment routes, but for the post-2000 timeframe. US DOE's desire to push ahead with early AVLIS deployment has to be seen in this global context. The different feed and product material interface requirements could generate resistance to the use of AVLIS by customers and other fuel cycle companies. The BNFL/URENCO atomic vapor laser enrichment development program is able to profit from USDOE's experience by ensuring very early that it encompasses all fuel cycle aspects. A process is being developed that is optimized from yellowcake to ceramic UO 2 , rather than just the difficult enrichment process. This is far more likely, if it becomes economically competitive, to produce a good match with customer requirements and so reduce the commercial risks of such a decision

The assessment and the farmers' perceived ranking of feed resources and coping strategies with feed scarcity in smallholder dairy farming in selected district towns of Jimma Zone, Ethiopia.

Science.gov (United States)

Duguma, Belay; Dermauw, Veronique; Janssens, Geert

2017-06-01

Inadequate quantity and quality of feed resources are major constraints limiting milk production and reproductive performance of dairy cattle in Ethiopia. The aim of this study was to assess dairy cattle feed resources, feeding practices, the farmers' perceived ranking of feed resources, causes of feed shortage, and coping strategies to feed scarcity in smallholder dairy system in selected district towns of Jimma Zone, Ethiopia. Data were obtained by interviewing 52 randomly selected smallholder dairy farmers using structured questionnaires and through direct observations. Results showed that 20 main feed types used by dairy farmers were identified and categorized into natural pastures, crop residues, green feeds, hay, agro-industrial by-products, concentrate mix, and non-conventional feeds. Overall, natural pasture (mean rank = 0.453), non-conventional feeds (0.307), cut green feeds (0.086), conserved hay (0.076), crop residues (0.049), and concentrate feeds (0.029) were ranked as the main feed resources in decreasing order of importance. Natural pasture grazing (92.2% of the respondents), hay (35.6%), and green feeds (29.4%) were the most important conventional basal feeds used. Wheat bran (11.7% of the respondents) followed by commercial concentrate mix (9.4%), Noug seedcake (8.3%), grain (7.8%), and molasses (6.1%) were the concentrate supplements used. Overall, bulule-flour mill leftovers (67.2% of the farmers), bean and pea hulls (57.2%) and atella-local brew by-product (37.2%), enset (Ensete ventricosum, 34.4%), and sugarcane top (32.2%) were the non-conventional feeds available and used during feed scarcity. Barley and teff (Eragrostis teff) straws and maize and sorghum stovers were the main crop residues used in the dry seasons. Overall, 73.9, 12.2, 12.2, and 1.7% of the respondents practiced free grazing, zero grazing, semi-zero, and a combination of zero- and free-grazing systems, respectively. Over 84% of the respondents in the dry season and 50% in

Ecofeed, animal feed produced from recycled food waste

Directory of Open Access Journals (Sweden)

Katsuaki Sugiura

2009-09-01

Full Text Available Due to the price hike of imported grains for feed, the production of Ecofeed, feed produced from recycled food waste, has increased in recent years. Food dregs from the food and beverage processing industry and out-of-date food from supermarkets and convenience stores are most often used as raw materials for Ecofeed. As food waste usually contains a lot of moisture and is easily spoiled, guidelines prescribing measures to be taken when collecting, transporting and storing raw materials, and for the production, shipment, storage and use of Ecofeed products, have been developed to ensure the safety of Ecofeed. The guidelines also include measures that should be taken to prevent the spread of bovine spongiform encephalopathy when producing and using Ecofeed. A certification system was introduced in March 2009 to ensure the quality and safety of Ecofeed and thus promote its use.

Age, lighting treatment, feed allocation and feed form influence ...

African Journals Online (AJOL)

During a broiler breeder trial with 3200 Cobb 500 hens, the effects of lighting treatment after 20 weeks' feed allocation and of feed form on the length of time taken to consume the daily allocation of feed were measured. Pullets were reared on 8-hour photoperiods to 20 weeks, then transferred to one of four lighting ...

Insights into phytase-containing transgenic Lemna minor (L.) as a novel feed additive.

Science.gov (United States)

Ghosh, Mrinmoy; Sharma, Neelesh; Gera, Meeta; Kim, Nameun; Huynh, Do; Zhang, Jiaojiao; Min, Taesun; Sodhi, Simrinder Singh; Kim, Min Bae; Rekha, V P B; Ko, Sukmin; Jeong, Dong Kee

2018-04-01

This study assessed the effect of supplementation of novel transgenic phytase on growth performance and bone mineralization in Korean native broiler chickens. The experiment was designed using four dietary groups: those with a diet supplemented with (A) recombinant phytase, (B) transgenic phytase from the plant Lemna minor, (C) or wild-type L. minor as well as (D) a control group that was supplemented with commercially available feed. Three hundred 1-day-old Korean native broiler chicks were used and divided into these four dietary treatment groups having three replicates of 25 birds each (n = 75). The results showed increases in growth performance and bone mineralization in Groups B and C; compared with Groups A and D. Hematological analyses revealed notable contrasts in erythrocyte sedimentation rate, red blood cell count, and hemoglobin levels among the experimental groups, whereas no impacts of dietary treatment were observed on total eosinophil, lymphocyte, heterophil, monocyte, and basophil levels. The relative expression profiling of candidate genes showed that the genes involved in growth response, meat quality, and P-Ca metabolism were significantly highly expressed in the phytase-supplemented groups. Hence, it is suggested that dietary supplementation with transgenic phytase plant L. minor for enhancing growth performance is a promising new approach in the broiler feed industry. To the best of our knowledge, we report here the most comprehensive analysis using a broiler model that provides a workable platform for further research on the cost-effective production of feed with different compositions that might be beneficial in the livestock feed industry.

Full-scale experiments on solid-pellets feed continuous Czochralski growth of silicon crystals

Science.gov (United States)

Anselmo, A.; Koziol, J.; Prasad, V.

1996-06-01

Two long-term solid-pellets feed continuous Czochralski growth experiments were performed in an industrial Czochralski crystal puller as an extension to our previous work [7]. The goals of these experiments were to examine how polysilicon pellets would melt in a standard Cz system, to discover the thermal effects the pellets would have on the overall melt, and to find if pellet addition could be an effective melt replenishment technique. These experiments demonstrate that the quality of the melt for the CCz growth is based heavily on the surface temperature of the melt. A novel characterization method ("impact severity") is developed to characterize the quality of the CCz melt. Stable feed rate and melt conditions were achieved for three different pull rates. These experiments demonstrate that the process is technically feasible, and can be retrofitted to the existing industrial systems. Several critical issues that need to be addressed to develop a successful CCz process are also discussed.

The sequencing batch reactor as an excellent configuration to treat wastewater from the petrochemical industry.

Science.gov (United States)

Caluwé, Michel; Daens, Dominique; Blust, Ronny; Geuens, Luc; Dries, Jan

2017-02-01

In the present study, the influence of a changing feeding pattern from continuous to pulse feeding on the characteristics of activated sludge was investigated with a wastewater from the petrochemical industry from the harbour of Antwerp. Continuous seed sludge, adapted to the industrial wastewater, was used to start up three laboratory-scale sequencing batch reactors. After an adaptation period from the shift to pulse feeding, the effect of an increasing organic loading rate (OLR) and volume exchange ratio (VER) were investigated one after another. Remarkable changes of the specific oxygen uptake rate (sOUR), microscopic structure, sludge volume index (SVI), SVI 30 /SVI 5 ratio, and settling rate were observed during adaptation. sOUR increased two to five times and treatment time decreased 43.9% in 15 days. Stabilization of the SVI occurred after a period of 20 days and improved significantly from 300 mL·g -1 to 80 mL·g -1 . Triplication of the OLR and VER had no negative influence on sludge settling and effluent quality. Adaptation time of the microorganisms to a new feeding pattern, OLR and VER was relatively short and sludge characteristics related to aerobic granular sludge were obtained. This study indicates significant potential of the batch activated sludge system for the treatment of this industrial petrochemical wastewater.

Crossflow Ultrafiltration for Removing Direct-15 Dye from Wastewater of Textile Industry

Directory of Open Access Journals (Sweden)

A.L. Ahmad

2017-11-01

Full Text Available Ultrafiltration membrane was used to treat the effluent from textile industries. Crossflow ultrafiltration using GN polymeric membrane was used to remove the dye from textile effluent. A synthetic textile effluent of Direct-15 dye was used. The study focused through the effect of feed concentration, transmembrane pressure and solution’s pH on the permeate flux and percentage of dye removal were investigated. Dye concentration had significant effects on flux values. Under the fixed pressures and pH, the flux decreased while the dye rejection increased with increasing feed concentration. Transmembrane pressure also had significant effect on flux values. Under the fixed feed concentration and pH, the flux increased while dye rejection decreased with increasing pressure. Experiment data showed that the highest flux was observed at pH 4 (acidic condition while the highest dye removal observed at pH 7. Data collection could be used to improve the effectiveness of dye removal from textile industry wastewater using membrane technology.

Uranium industry annual 1998

International Nuclear Information System (INIS)

1999-01-01

The Uranium Industry Annual 1998 (UIA 1998) provides current statistical data on the US uranium industry's activities relating to uranium raw materials and uranium marketing. It contains data for the period 1989 through 2008 as collected on the Form EIA-858, ''Uranium Industry Annual Survey.'' Data provides a comprehensive statistical characterization of the industry's activities for the survey year and also include some information about industry's plans and commitments for the near-term future. Data on uranium raw materials activities for 1989 through 1998, including exploration activities and expenditures, EIA-estimated reserves, mine production of uranium, production of uranium concentrate, and industry employment, are presented in Chapter 1. Data on uranium marketing activities for 1994 through 2008, including purchases of uranium and enrichment services, enrichment feed deliveries, uranium fuel assemblies, filled and unfilled market requirements, and uranium inventories, are shown in Chapter 2. The methodology used in the 1998 survey, including data edit and analysis, is described in Appendix A. The methodologies for estimation of resources and reserves are described in Appendix B. A list of respondents to the ''Uranium Industry Annual Survey'' is provided in Appendix C. The Form EIA-858 ''Uranium Industry Annual Survey'' is shown in Appendix D. For the readers convenience, metric versions of selected tables from Chapters 1 and 2 are presented in Appendix E along with the standard conversion factors used. A glossary of technical terms is at the end of the report. 24 figs., 56 tabs

The effect of feed rate and recycle rate variable on leaching process of Na2Zro3 with HCl in continuous stirred tank reactor (CSTR) series

Science.gov (United States)

Palupi, Bekti; Supranto, Sediawan, Wahyudi Budi; Setyadji, Moch.

2017-05-01

This time, the natural resources of zircon sand is processed into several zirconium products which is utilized for various industries, such as ceramics, glass industry, metal industry and nuclear industry. The process of zircon sand into zirconium products through several stages, one of them is leaching process of Na2ZrO3 with HCl. In this research, several variations of recycle-rate/feed-rate had been done to determine the effect on leaching process. The leaching was processed at temperature of 90°C, ratio of Na2ZrO3:HCl = 1g:30mL, and 142 rotary per minute of stirring speed for 30 minutes with variation of recycle-rate/feed-rate such as 0.478, 0.299, 0.218, 0.171 and 0.141. The diameter size of Na2ZrO3 powder that used are 0.088 to 0.149 mm. This process was carried out in Continuous Stirred Tank Reactor (CSTR) series with recycle. Based on this research, the greater of the recycle-rate/feed-rate variable, the obtained Zr recovery decreased. The correlation between recycle-rate/feed-rate and Zr recovery is shown by the equation y = -146.91x + 103.51, where y is the Zr recovery and x is the recycle-rate/feed-rate. The highest Zr recovery was 90.52% obtained at recycle-rate/feed-rate 0.141. The mathematical modeling involving the probability model P(r) = 2β2r2 exp(-βr2) can be applied to this leaching process with Sum of Squared Errors (SSE) values in the range of 6×10-7 - 7×10-6.

Systematic analysis of feeding behaviors and their effects on feed efficiency in Pekin ducks

Directory of Open Access Journals (Sweden)

Feng Zhu

2017-11-01

Full Text Available Abstract Background Feeding behavior study is important for animal husbandry and production. However, few studies were conducted on the feeding behavior and their relationship with feeding efficiency in Pekin ducks. In order to investigate the feeding behavior and their relationship with feed efficiency and other economic traits in Pekin ducks, we selected 358 male Pekin ducks and recorded feeding information between 3 to 6 wk of age using automatic electronic feeders, and compared the feeding behavior under different residual feed intake (RFI levels. Results We observed that total feed time, daily feed intake and feed intake per meal had strong positive correlations with feed efficiency traits; moreover, strong correlation between feed intake per meal and body weight was found (R=0.32, 0.36. Daily feeding rate meal and meal duration had weak correlations with feed efficiency (R=0.14~0.15. The phenotypic correlation of between-meal pauses, with feed efficiency was not observed. When daily changes were analyzed, high RFI ducks had the highest feed consumption over all times, and obvious differences in daily visits were found among different RFI level animals during the middle period; these differences were magnified with age, but there was no difference in daily meal number. Moreover, our data indicate that high RFI birds mainly take their meals at the edge of the population enclosure, where they are more susceptible to environmental interference. Conclusions Overall, this study suggests that the general feeding behaviors can be accurately measured using automatic electronic feeders and certain feeding behaviors in Pekin ducks are associated with improved feed efficiency.

Feeding families and children--1776 to 1976. A bicentennial study.

Science.gov (United States)

Lowenberg, M E; Lucas, B L

1976-03-01

The food heritage which Americans enjoy today owes its great diversity to the influences of many ethnic groups--the native Indians, Franciscan friars in California, Mexican-Americans, the British, the French, the Creoles, and later, northern Europeans and those of Mediterranean stock. Geography and climate in different parts of our large country and religious beliefs have also played a part in the development of our present-day, varied cuisine. In our colonial and pioneer days, most people raised their own food, but as our nation has become industrialized and urbanized, we find that now only 7 per cent of our population produces the food for our entire nation, and our consumers generally buy their food in stores. Even as late as the beginning of the twentieth century, infant feeding practices could be considered unscientific and primitive. Only in recent years have knowledge of metabolism and the rapid increase in nutritional science permitted progress in infant feeding. Problems of feeding families remain, nevertheless--different than in the early days of our nation--and their solution challenges American ingenuity.

INFLUENCE OF FEEDING TIME ON FEED UTILIZATION BY SIAMESE CATFISH, Pangasius hypophthalmus JUVENILE

Directory of Open Access Journals (Sweden)

Nina Meilisza

2010-06-01

Full Text Available Siamese catfish (Pangasius hypophthalmus at juvenile stage is used as ornamental fish by fish hobbies because of their beautiful shape and movement. Feeding time is a part of feeding management to get the best and effective strategy on feed input. This study aimed to determine the growth of Siamese catfish juvenile by looking at the influence of feeding time on feed utilization. The average individual weight of juveniles used was ± 3.2 g stocked 15 fish per aquarium equipped with recirculation system. Two level factors in the factorial design consisted of 4 feeding times (at 8:00, at 12:00, at 16:00, and as control (8:00, 12:00, 16:00 and feeding level (45 g feed kg-1 fish, 90 g feed kg-1 fish. Interaction between feeding time and feeding level resulting eight types of treatments research, namely A (8/45, B (12/45, C (16/45, D (8:12:16/45, E (8:12:16/90, F (8/90, G (12/90, and H (16/90. The results showed that feeding time had significant effect on the specific growth rate, feed conversion, and protein efficiency ratio and were significantly different among the treatments (P<0.05. Besides feeding time control (treatments D and E, treatment C also showed the highest of specific growth rate (2.03%, protein efficiency ratio (1.46, and the lowest feed conversion ratio (1.85.

Destruction of an industrial wastewater by supercritical water oxidation in a transpiring wall reactor

International Nuclear Information System (INIS)

Bermejo, M.D.; Cocero, M.J.

2006-01-01

The supercritical water oxidation (SCWO) is a technology that takes advantage of the special properties of water in the surroundings of critical point of water to completely oxidize wastes in residence times lower than 1 min. The problems caused by the harsh operational conditions of the SCWO process are being solved by new reactor designs, such as the transpiring wall reactor (TWR). In this work, the operational parameters of a TWR have been studied for the treatment of an industrial wastewater. As a result, the process has been optimized for a feed flow of 16 kg/h with feed inlet temperatures higher than 300 deg. C and transpiring flow relation (R) between 0.2 and 0.6 working with an 8% (w/w) isopropanol (IPA) as a fuel. The experimental data and a mathematical model have been applied for the destruction of an industrial waste containing acetic acid and crotonaldehyde as main compounds. As the model predicted, removal efficiencies higher than 99.9% were obtained, resulting in effluents with 2 ppm total organic carbon (TOC) at feed flow of 16 kg/h, 320 deg. C of feed temperature and R = 0.32. An effluent TOC of 35 ppm under conditions feed flow of 18 kg/h, feed inlet temperatures of 290 deg. C, reaction temperatures of 570 deg. C and R = 0.6

Prospects in the use of Ficus polita as a local ruminant feed ...

African Journals Online (AJOL)

The proximate as well as the mineral compositions of Ficus polita and some anti nutritional factors were determined in order to justify the local use of this plant as a feedstuff especially for ruminant animals and to establish the possible wide scale utilization of this plant in the feed industry. The proximate, mineral and ...

3.1.1.2 Feed Processing and Handling DL2 Final Report

Energy Technology Data Exchange (ETDEWEB)

Elliott, Douglas C.; Magnuson, Jon K.; Wend, Christopher F.

2006-09-30

This milestone report is the deliverable for our Feed Processing and Handling project. It includes results of wet biomass feedstock analysis, slurry pumping information, fungal processing to produce a lignin-rich biorefinery residue and two subcontracted efforts to quantify the amount of wet biomass feedstocks currently available within the corn processing and paper processing industries.

Animal Feeding Operations

Science.gov (United States)

... type=”submit” value=”Submit” /> Healthy Water Home Animal Feeding Operations Recommend on Facebook Tweet Share Compartir ... of Concentrated Animal Feeding Operations (CAFOs) What are Animal Feeding Operations (AFOs)? According to the United States ...

Feeding Your Baby

Medline Plus

Full Text Available ... care Is it safe? Labor & birth Postpartum care Baby Caring for your baby Feeding your baby Family ... community Home > Baby > Feeding your baby Feeding your baby E-mail to a friend Please fill in ...

Feeding Your Baby

Medline Plus

Full Text Available ... our online community Home > Baby > Feeding your baby Feeding your baby E-mail to a friend Please ... been added to your dashboard . Time to eat! Feeding your baby helps her grow healthy and strong. ...

Yeast derived from lignocellulosic biomass as a sustainable feed resource for use in aquaculture.

Science.gov (United States)

Øverland, Margareth; Skrede, Anders

2017-02-01

The global expansion in aquaculture production implies an emerging need of suitable and sustainable protein sources. Currently, the fish feed industry is dependent on high-quality protein sources of marine and plant origin. Yeast derived from processing of low-value and non-food lignocellulosic biomass is a potential sustainable source of protein in fish diets. Following enzymatic hydrolysis, the hexose and pentose sugars of lignocellulosic substrates and supplementary nutrients can be converted into protein-rich yeast biomass by fermentation. Studies have shown that yeasts such as Saccharomyces cerevisiae, Candida utilis and Kluyveromyces marxianus have favourable amino acid composition and excellent properties as protein sources in diets for fish, including carnivorous species such as Atlantic salmon and rainbow trout. Suitable downstream processing of the biomass to disrupt cell walls is required to secure high nutrient digestibility. A number of studies have shown various immunological and health benefits from feeding fish low levels of yeast and yeast-derived cell wall fractions. This review summarises current literature on the potential of yeast from lignocellulosic biomass as an alternative protein source for the aquaculture industry. It is concluded that further research and development within yeast production can be important to secure the future sustainability and economic viability of intensive aquaculture. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

THE BANKRUPT RISK IN FEED DISTRIBUTION BRANCH IN DOLJ DISTRICT – FDR MODEL

Directory of Open Access Journals (Sweden)

Ovidiu CĂPRARIU

2010-01-01

Full Text Available Abstract:In this article, we are intending to present a score function in order to calculate the bankrupt risk for a special domain: feed distribution.All analysis models of the bankruptcy risk have at their basis a score function according to which it is determined with approximation whether the company would get bankruptcy or would have performing economic results, in a period immediately following the analysis.Having a personal analysis in feed distribution branch, I elaborated a score function for counting bankrupt risk, based on financial and non-financial studies of many companies and we called this model “Feed Distribution Risk Model” (FDR. The target was to obtain a high level of precision, so I choose the feed industry and more specific only feed distribution branch and I analyzed statistics about the evolution of the feed distribution companies in Romania and about the normal level of some financial or non-financial indicators for these companies.I have choose five feed distribution companies and I counted two international score functions and two Romanian score function with FDR function. Finally, I concluded that the three main differences between the classic models and this one are that the FDR model is for a specified branch – the feed distribution, it uses an important number of indicators and uses non-financial indicators, which explain the shareholders bonity. As directions to continue the investigations, I propose the elaboration of another models for other branches and adjust the financial information with true dates.

Emerging feed markets for ruminant production in urban and peri-urban areas of Northern Ghana.

Science.gov (United States)

Konlan, S P; Ayantunde, A A; Addah, W; Dei, H K; Karbo, N

2018-01-01

Feed shortage in urban and peri-urban areas has triggered the emergence of feed markets in Northern Ghana. These markets were surveyed at three locations (Tamale, Bolgatanga, and Wa markets) to determine types and prices of feedstuffs sold across seasons; early dry (November-January), late dry (February-April), early wet (May-July), and main wet (August-October). Semi-structured questionnaire was used for data collection. Three samples of each feed type in the markets were bought from three different sellers per market in each season. The samples were oven dried to constant weight and price/kg DM of each feed determined. The total respondents were 169. Out of this number, 41% were feed sellers, 46% buyers, and 13% retailers. The feedstuffs found were crop residues (groundnut haulm and cowpea haulm), agro-industrial by-products (bran of maize, rice, and sorghum), fresh grasses (Rotteboellia cochinchinensis), and local browses (Ficus sp. and Pterocarpus erinaceous). Prices of feeds differed (P  0.05) in all seasons but that of crop residues were higher (P < 05) in early to late dry season than the wet season. Majority (90%) of respondents opined that the feed market will expand due to increasing number of livestock population in the peri-urban areas.

Occurrence of ochratoxin A in poultry feeds and feed ingredients from Pakistan.

Science.gov (United States)

Sherazi, S T H; Shar, Z H; Sumbal, G A; Tan, Eddie T; Bhanger, M I; Kara, Huseyin; Nizamani, S M

2015-02-01

A study was conducted to evaluate the occurrence of ochratoxin A (OTA) in complete poultry feeds (n=80) and poultry feed ingredients (n=286) from Pakistan. All samples were first analyzed by indirect enzyme linked immunosorbent assay (ELISA), samples with OTA concentrations above the European Union maximum regulatory limit (MRL, 100 μg/kg) were further confirmed by HPLC-FLD. Contamination frequency and mean OTA levels were 31% and 51 μg/kg in feed ingredients, and the corresponding values for complete feeds were 38% and 75 μg/kg. Ten samples of complete poultry feed and 19 samples of feed ingredients contained OTA at levels higher than the MRL. The results of the present study indicate that there is a strong need for a more intense monitoring programs for OTA in poultry feed.

Parent-reported feeding and feeding problems in a sample of Dutch toddlers

NARCIS (Netherlands)

Moor, J.M.H. de; Didden, H.C.M.; Korzilius, H.P.L.M.

2007-01-01

Little is known about the feeding behaviors and problems with feeding in toddlers. In the present questionnaire study, data were collected on the feeding behaviors and feeding problems in a relatively large (n = 422) sample of Dutch healthy toddlers (i.e. 18-36 months old) who lived at home with

Evaluation of PCDD/Fs characterization in animal feed and feed additives.

Science.gov (United States)

Kim, MeeKyung; Kim, Sooyeon; Yun, Seon Jong; Kwon, Jin-Wook; Son, Seong-Wan

2007-09-01

Safety control of feed and feed additives is necessary to have safe food of animal origin. Based on media reports, nine incidents regarding dioxins and/or PCBs contaminations occurred worldwide during the last decade. Korea is a country which imports feed and feed additives. In this study, various kinds of feed and feed additives were analyzed to monitor the contamination level of dioxins. The level of PCDD/Fs in fish oil was the highest with a concentration of 23.33ngkg(-1), which is equivalent to a toxicological concentration of 4.68ngWHO-TEQ/kg. Feed from animals origin such as chicken meal, animal fat, fish meal, fish oil, and shell powder showed relatively higher concentrations of PCDD/Fs. Feed from plants origin, minerals, and additives ranged from non-detects for bit pulp and ethoxyquin to 8.28ngkg(-1) for dl-methionine. From a toxicological point of view, the highest concentration in vitamins was 0.08ngWHO-TEQ/kg among the feed additives. 2,3,4,7,8-PeCDF was the dominant congener in samples of fish oil, fish meal, and shell powder. Animal fat showed that the pattern of PCDD/Fs depends on the sources of contamination. A sample of animal fat showed 1,2,3,4,7,8-HxCDF and the other sample showed 1,2,3,4,7,8-HxCDD as a primary congener. Generally, low levels of PCDDs were detected in feed additives. Patterns of PCDD/Fs in choline chloride were different with that in choline chloride from an incident in Europe in 2000.

Mycotoxins in horse feed: Incidence of deoxynivalenol in oat samples from stud farms

Directory of Open Access Journals (Sweden)

Urošević Miroslav I.

2011-01-01

Full Text Available Reports concerning mycotoxins in horse feed are very rare and are typically restricted to fumonisins. As a non-ruminant monogastric species, horses may be more sensitive to adverse effects of mycotoxins, but the most severe effect of fumonisin B1 (FB1 in equines is that it causes fatal leucoencephalomalacia. In recent years, the European Food Safety Authority (EFSA has evaluated several mycotoxins as “undesirable substances in animal feed” with the aim of establishing guidance values for the feed industry. In its evaluation of deoxynivalenol (DON, EFSA concluded that this toxin exhibited toxic effects in all species, but that horses were more tolerant towards this toxin than pigs. According to the available data, a systematic survey on mycotoxins in horse feed in Serbia has not been published. Therefore, the aim of this study was to investigate the incidence of mycotoxins in horse feed in Vojvodina. Samples of oats for horse consumption, collected in 2010, were analyzed by enzyme immunoassays (ELISA for deoxynivalenol contamination. Twelve samples of oats were taken from twelve horse studs, with sport, school and hobby horses.

Development of a two-stage feeding strategy based on the kind and level of feeding nutrients for improving fed-batch production of L-threonine by Escherichia coli.

Science.gov (United States)

Liu, Shuwen; Liang, Yong; Liu, Qian; Tao, Tongtong; Lai, Shujuan; Chen, Ning; Wen, Tingyi

2013-01-01

Fed-batch fermentation is the predominant method for industrial production of amino acids. In this study, we comprehensively investigated the effects of four kinds of feeding nutrients and developed an accurate optimization strategy for fed-batch production of L-threonine. The production of L-threonine was severely inhibited when cell growth ceased in the bath culture. Similarly, L-threonine production was also associated with cell growth in the carbon-, phosphate-, and sulfate-limited fed-batch cultures, but the accumulation of L-threonine was markedly increased because of the extended production time in the growth stage. Interestingly, auxotrophic amino acid (L-isoleucine)-limited feeding promoted L-threonine production over the non-growth phase. Metabolite analysis indicates that substantial production of acetate and glutamate and the resulting accumulation of ammonium may lead to the inhibition of L-threonine production. During the growth phase, the levels of L-isoleucine were accurately optimized by balancing cell growth and production with Pontryagin's maximum principle, basing on the relationship between the specific growth rate μ and specific production rate ρ. Furthermore, the depletion of L-isoleucine and phosphate at the end of the growth phase favored the synthesis of L-threonine in the subsequent non-growth phase. Combining the two-stage feeding profiles, the final L-threonine concentration and conversion rate were increased by 5.9- and 2.1-fold, respectively, compared to batch processes without feeding control. The identification of efficient feeding nutrient and the development of accurate feeding strategies provide potential guidelines for microbial production of amino acids.

Organic Poultry Feeding

Directory of Open Access Journals (Sweden)

Arda Yıldırım

2014-02-01

Full Text Available Many people have led to the consumption of organic animal products in the event that the increase in sensitivity to a healthy diet in developed countries, and maintaining the safety of food of animal origin. Feeding and breeding in conventional production are emerged some of the negative effects and also it is more in organic production with new restrictions. Organic production is based on animal welfare. On the basis of behaviors such as feather-pecking and cannibalism known to be low in protein level of rations and unbalanced in terms of amino acids or minerals. As of 2015, organic poultry feed provided the appropriate conditions that will be 95% organic certified in Turkey and therefore, to create a balanced ration and feed hygiene in protecting brings serious challenges. Fodder supply of organic poultry feed raw materials that make up the quality, quantity and issue forms a significant effect on the health of the poultry additives permitted. The quality of the feed raw materials that constituent diets, quantity, feed supplying form and permitted feed additives significantly affects the health of poultry. Different physiological stages of the animal's nutritional requirements in order to ensure production of quality poultry products must be met from organically produced and very well-known with the contents of feedstuff digestibility. In this study, the problems encountered in feeding can be eliminated while performing economic production with considering animal welfare, following that balanced and adequate organic ration formulations and issues such as improving the production of feed raw materials are discussed.

Protein co-products and by-products of the biodiesel industry for ruminants feeding

Directory of Open Access Journals (Sweden)

Ricardo Andrés Botero Carrera

2012-05-01

Full Text Available The objective of the experiment was to classify 20 protein co-products and by-products of the biodiesel industry with potential to use in ruminant feeding. The meals evaluated were: cottonseed, canudo-de-pito, crambe, sunflower, castor-oil seeds detoxified with calcium, non-detoxified castor-oil seeds and soybean; and the cakes were: cottonseed, peanut, babassu, crambe, palm oil, sunflower, licuri, macauba seeds, non-detoxified castor-oil seeds, turnip and jatropha. The samples were quantified to determine dry matter (DM, organic matter (OM, crude protein (CP, ether extract (EE, neutral detergent fiber corrected for ash and protein (NDFap, non-fiber carbohydrates (NFC, acid detergent fiber corrected for ash and protein (ADFap, lignin, cutin and starch levels. The CP profile was characterized in fractions A, B1, B2, B3 and C. The in vitro dry matter digestibility (IVDMD, in vitro neutral detergent fiber digestibility (IVNDFD, rumen degradable and undegradable protein, intestinal digestibility, indigestible neutral detergent fiber and undegradable neutral detergent insoluble protein were evaluated. The OM, CP, EE, NDFap, NFC, ADFap, lignin, cutin and starch contents varied from 81.95 to 95.41%, 18.92 to 57.75%, 0.56 to 18.40%, 10.13 to 62.30%, 3.89 to 27.88%, 6.15 to 36.86%, 1.19 to 5.04%, 0 to 17.87% and 0.68 to 14.50%, respectively. The values of fractions A, B1, B2, B3 and C ranged from 5.40 to 43.31%, 0.08 to 37.63%, 16.75 to 79.39%, 1.86 to 59.15% and 0.60 to 11.47%, respectively. Concentrations of IVDMD, IVNDFD, rumen-degradable and undegradable protein, intestinal digestibility, indigestible NDF and undegradable neutral detergent insoluble protein ranged from 31.00 to 95.92%, 55.04 to 97.74%, 41.06 to 97.61%, 2.39 to 58.94, 9.27 to 94.26%, 1.05 to 40.80% and 0.29 to 2.92%, respectively. Some of these products can replace soybean meal, specially the Macauba seeds cake, cottonseed meal and peanut and turnip cakes based on digestive

Hydrocracking of heavy ends to light hydrocarbons for steam-crackers feed

Energy Technology Data Exchange (ETDEWEB)

Cesana, A.; Buzzoni, R. [Eni S.p.A., Research Centre for Non-Conventional Energies, Novara (Italy). Ist. Eni Donegani

2010-12-30

Low value aromatic fractions, i.e. heavy pygas and pyrolysis fuel oil from naphtha steamcrackers or heavy distillates and ends from refinery, can be conveniently upgraded as high quality steamcracker feeds by severe hydrocracking treatment at 450 -530 C, 6 MPa H{sub 2} employing Ni-Mo or Zn-Mo on H-USY zeolite as catalysts. The process mainly leads to linear C{sub 2}-C{sub 4} alkanes with a low yield to CH{sub 4}. The robust catalytic system allows upgrading fractions with a high content of sulfur and nitrogen. Catalyst life and industrial feasibility have been assessed by long life runs using genuine industrial feedstocks. (orig.)

Prediction of Improved Performance of Catalytic Hydrogenation Reactor by Periodic Modulation of the Feed Rate

Czech Academy of Sciences Publication Activity Database

Staněk, Vladimír; Hanika, Jiří; Jiřičný, Vladimír; Stavárek, Petr; Tukač, V.; Lederer, J.

2009-01-01

Roč. 23, č. 3 (2009), s. 251-257 ISSN 1451-9372 R&D Projects: GA MPO FT-TA/039 Institutional research plan: CEZ:AV0Z40720504 Keywords : trickle bed * feed modulation * catalytic reactor Subject RIV: CI - Industrial Chemistry, Chemical Engineering

Biocatalysts: application and engineering for industrial purposes.

Science.gov (United States)

Jemli, Sonia; Ayadi-Zouari, Dorra; Hlima, Hajer Ben; Bejar, Samir

2016-01-01

Enzymes are widely applied in various industrial applications and processes, including the food and beverage, animal feed, textile, detergent and medical industries. Enzymes screened from natural origins are often engineered before entering the market place because their native forms do not meet the requirements for industrial application. Protein engineering is concerned with the design and construction of novel enzymes with tailored functional properties, including stability, catalytic activity, reaction product inhibition and substrate specificity. Two broad approaches have been used for enzyme engineering, namely, rational design and directed evolution. The powerful and revolutionary techniques so far developed for protein engineering provide excellent opportunities for the design of industrial enzymes with specific properties and production of high-value products at lower production costs. The present review seeks to highlight the major fields of enzyme application and to provide an updated overview on previous protein engineering studies wherein natural enzymes were modified to meet the operational conditions required for industrial application.

Factors associated with exclusive breast-feeding and breast-feeding in Norway

OpenAIRE

Kristiansen, Anne Lene; Lande, Britt; Øverby, Nina Cecilie; Andersen, Lene Frost

2010-01-01

Objective To identify factors associated with exclusive breast-feeding and breast-feeding during the first year of life among Norwegian infants. Design Data on breast-feeding practices were collected by a semi-quantitative FFQ. Setting In 2006?2007 about 3000 infants were invited to participate in a population-based prospective cohort study in Norway. Subjects A total of 1490 mothers/infants participated at both 6 and 12 months of age. Results Exclusive breast-feeding at 4 months was associat...

Progressive technologies in the food industry

International Nuclear Information System (INIS)

Chyleova, L.; Sukova, I.

1987-01-01

The collection of papers presented at the training of food industry specialists contains 14 papers, of which 3 were incorporated in INIS. All deal with the radiation treatment of foods and feeds, various equipment and technologies used for the purpose, major radiation effects and the advantages of irradiation techniques. Also discussed are adverse effects of radiation on foodstuffs, questions of legislation and future prospects. (M.D.)

Industrial Mining's flexibility aids in customer satisfaction

Energy Technology Data Exchange (ETDEWEB)

1985-08-01

Mining flexibility and customer specification keeps Industrial Mining of Youngstown, Ohio competitive in a tough environment. The company fills the needs of the small customer who requires a special blend or sized product. Industrial Mining works terrain that was uneconomical to mine before but is now profitable. Draglines and mobile equipment are used for overburden removal for economical and flexible mining with most mining by the contour method. Industrial Mining's preparation plant was constructed in 1979 to enable the company to wash and screen different stoker products and utility coal with a modern on-site lab a quality product can be constantly maintained. A wheel loader is used to feed the hopper from selective stockpiles and this allows blending on the raw side or within the plant.

Extracellular Metabolites from Industrial Microalgae and Their Biotechnological Potential

Directory of Open Access Journals (Sweden)

Lu Liu

2016-10-01

Full Text Available Industrial microalgae, as a big family of promising producers of renewable biomass feedstock, have been commercially exploited for functional food, living feed and feed additives, high-value chemicals in nutraceuticals, cosmeceuticals, and chemical reagents. Recently, microalgae have also been considered as a group that might play an important role in biofuel development and environmental protection. Almost all current products of industrial microalgae are derived from their biomass; however, large amounts of spent cell-free media are available from mass cultivation that is mostly unexploited. In this contribution we discuss that these media, which may contain a remarkable diversity of bioactive substances are worthy to be recovered for further use. Obviously, the extracellular metabolites from industrial microalgae have long been neglected in the development of production methods for valuable metabolites. With the advances in the last ten years, more and more structures and properties from extracellular metabolites have been identified, and the potential utilization over wide fields is attracting attention. Some of these extracellular metabolites can be potentially used as drugs, antioxidants, growth regulators or metal chelators. The purpose of this review is to provide an overview of the known extracellular metabolites from industrial microalgae which might be of commercial interest. The attention mainly focuses on the reports of extracellular bioactive metabolites and their potential application in biotechnology.

Feeding Tubes

Science.gov (United States)

... feeding therapies have been exhausted. Please review product brand and method of placement carefully with your physician ... Total Parenteral Nutrition. Resources: Oley Foundation Feeding Tube Awareness Foundation Children’s Medical Nutrition Alliance APFED’s Educational Webinar ...

Prey perception in feeding-current feeding copepods

DEFF Research Database (Denmark)

Kiørboe, Thomas; Goncalves, Rodrigo J.; Florian Couespel, Damien

2016-01-01

We reply to the comments of Paffenhöfer and Jiang () who argues that remote chemical prey perception is necessary for feeding-current feeding copepods to fulfill their nutritional requirements in a dilute ocean, that remote chemical prey detection may only be observed at very low prey concentrati......We reply to the comments of Paffenhöfer and Jiang () who argues that remote chemical prey perception is necessary for feeding-current feeding copepods to fulfill their nutritional requirements in a dilute ocean, that remote chemical prey detection may only be observed at very low prey...... cells have short intense leakage burst, only a very small fraction of prey cells would be available to the copepod at any instance in time and, thus would be inefficient at low prey concentration. Finally, we report a few new observations of prey capture in two species of copepods, Temora longicornis...... and Centropages hamatus, offered a 45-μm sized dinoflagellate at very low concentration. The observed short prey detection distances, up to a few prey cell radii, are consistent with mechanoreception and we argue briefly that near-field mechanoreception is the most likely and common prey perception mechanism...

Phenotypic and genetic relationships of feeding behavior with feed intake, growth performance, feed efficiency, and carcass merit traits in Angus and Charolais steers.

Science.gov (United States)

Chen, L; Mao, F; Crews, D H; Vinsky, M; Li, C

2014-03-01

Feeding behavior traits including daily feeding duration (FD), daily feeding head down time (HD), average feeding duration per feeding event (FD_AVE), average feeding head down time per feeding event (HD_AVE), feeding frequency (FF), and meal eating rate (ER) were analyzed to estimate their phenotypic and genetic correlations with feed intake, growth performance, residual feed intake (RFI), ultrasound, and carcass merit traits in Angus and Charolais finishing steers. Heritability estimates for FD, HD, FD_AVE, HD_AVE, FF, and ER were 0.27 ± 0.09 (SE), 0.25 ± 0.09, 0.19 ± 0.06, 0.11 ± 0.05, 0.24 ± 0.08, and 0.38 ± 0.10, respectively, in the Angus population and 0.49 ± 0.12, 0.38 ± 0.11, 0.31 ± 0.09, 0.29 ± 0.10, 0.43 ± 0.11, and 0.56 ± 0.13, respectively, in the Charolais population. In both the Angus and Charolais steer populations, FD and HD had relatively stronger phenotypic (0.17 ± 0.06 to 0.32 ± 0.04) and genetic (0.29 ± 0.17 to 0.54 ± 0.18) correlations with RFI in comparison to other feeding behavior traits investigated, suggesting the potential of FD and HD as indicators in assessing variation of RFI. In general, feeding behavior traits had weak phenotypic correlations with most of the ultrasound and carcass merit traits; however, estimated genetic correlations of the feeding behavior traits with some fat deposition related traits were moderate to moderately strong but differed in magnitude or sign between the Angus and Charolais steer populations, likely reflecting their different biological types. Genetic parameter estimation studies involving feeding behavior traits in beef cattle are lacking and more research is needed to better characterize the relationships between feeding behavior and feed intake, growth, feed utilization, and carcass merit traits, in particular with respect to different biological types of cattle.

Power Factor Correction for Thyristor Equipment in Glass Industry ...

African Journals Online (AJOL)

Thyristor power controllers are now widely used in the glass industry for controlling furnace temperature. While offering a number of operational advantages, they operate at lagging power factors which require correction for minimum power cost. Harmonic resonance with the utility feed, however, complicate the use of ...

A Limited Survey of Aflatoxins in Poultry Feed and Feed Ingredients in Guyana

Directory of Open Access Journals (Sweden)

Donna M. Morrison

2017-11-01

Full Text Available A study was conducted to determine the presence of aflatoxins in finished poultry feed from manufacturing companies, feed ingredients, and poultry feed at the point of sale. Two collections were made. In the first collection, samples of the finished feed and feed ingredients were analyzed by high-performance liquid chromatography (HPLC. For the second collection, all samples were analyzed by ELISA while a subset was analyzed by HPLC. Of the 27 samples of finished feed, five samples had aflatoxin concentrations greater than the United States Food and Drug Administration (USFDA and European Union Commission (EUC maximum tolerable limit of 20 µg/kg, while for the feed ingredients, three of the 30 samples of feed ingredients exceeded the limit. Of the 93 samples of finished feed purchased from retailers, five samples had aflatoxin concentrations greater than the maximum tolerable limit. This survey indicates that most of the samples were below the maximum regulatory limit and maintained quality up to the point of sale for 2015 and 2016. However, given that some samples were above the limit, there is a need to monitor the production and marketing chain to ensure that the quality of the finished feed is not compromised.

FEEDING DIFFICULTIES IN PRESCHOOL CHILDREN, PREVIOUS FEEDING PRACTICES, AND NUTRITIONAL STATUS.

Science.gov (United States)

Maranhão, Hélcio de Sousa; Aguiar, Renata Cunha de; Lira, Débora Teixeira Jales de; Sales, Mônica Úrsula Figuerêdo; Nóbrega, Nathalia Ávila do Nascimento

2018-01-01

To identify the prevalence of feeding difficulties in preschoolers, its association with epidemiological factors and previous eating habits, and repercussion on nutritional status. Cross-sectional study with a questionnaire given to the mothers of 301 children aged 2-6 years enrolled in public and private kindergartens in Natal, Northeast Brazil, conducted in 2014-2015. Feeding difficulty was assessed according to Kerzner's criteria, resulting in the profiles "highly selective intake", "active child with small appetite", "fear of feeding", and "child with psychological disorder or neglected". Association with the following independent variables was analyzed by logistic regression: breastfeeding time, age of cows' milk and complementary feeding introduction, age range, family income, type of school, mothers' profile (responsive or nonresponsive), and body mass index (BMI). Feeding difficulty was found in 37.2% of cases, with predominance of "highly selective intake" (25.4%). It was not associated with infancy feeding practices, family income or type of school. There were no differences between the BMI Z score means for the groups with and without feeding difficulty (1.0±1.5 SD and 1.1±1.4 SD, respectively). The five-to-six age range had more occurrences (OR 1.8; 95%CI 1.1-2.9). Children of responsive mothers were less likely to have feeding difficulties (OR 0.4; 95%CI 0.2-0.8). Feeding difficulties were very frequent. Nutritional status was not impacted by it, and infancy eating habits were not associated with it. Responsive mothers' profile is a protective factor against eating difficulties and reinforces the importance of behavioral factors and mother-child interaction.

Study on mycoflora of poultry feed ingredients and finished feed in Iran.

Science.gov (United States)

Ghaemmaghami, Seyed Soheil; Modirsaneii, Mehrdad; Khosravi, Ali Reza; Razzaghi-Abyaneh, Mehdi

2016-02-01

Unhygienic poultry feedstuffs can lead to nutrient losses and detrimental effect on poultry production and public health. In the present study, mycobiota and colony-forming units per gram in ingredients and finish poultry feed was evaluated with special reference to potentially mycotoxigenic fungi. Eighty five samples of corn, soybean meal and poultry finished feed were collected from nine poultry feed factories located in three provinces i.e. Tehran, Alborz and Qom in Iran from October 2014 to January 2015. Samples were cultured on Sabouraud dextrose agar (SDA), Aspergillus flavus and parasiticus agar (AFPA) and dichloran rosebengal chloramphenicol agar (DRBC) and incubated at 28 °C for 7-10 days. Purified fungal colonies were identified by a combination of macro- and microscopic morphological criteria. For determining the rate of fungal contamination, samples were cultured on SDA and colony forming units (CFUs) were calculated. A total of 384 fungal isolates belonging to 7 genera of filamentous fungi and yeasts were obtained from corn (124 isolates), soybean meal (92 isolates), and feed before (72 isolates), and after pelleting (96 isolates). The most prominent fungal isolate in corn, soybean meal and feed before pelleting (feed as mash form) was Fusarium but in feed after pelleting was Aspergillus. Among 5 Aspergillus species isolated, potentially aflatoxigenic A. flavus isolates was predominant in corn (46.6%), soybean meal (72.7%) and poultry finished feed (75%). CFUs results indicated that 9/22 corn samples (40.9%), none of 22 soybean meal samples, 19/41 finished feed (46.3%) were contaminated higher than the standard limit. Our results indicated that corn, soybean meal and finished feed of poultry feed mill are contaminated with various fungal genera by different levels sometimes higher that the standard limits. Contamination with potentially mycotoxigenic fungi especially Aspergillus species may be considered as a human public health hazard.

Determining suitable dimensions for dairy goat feeding places by evaluating body posture and feeding reach.

Science.gov (United States)

Keil, Nina M; Pommereau, Marc; Patt, Antonia; Wechsler, Beat; Gygax, Lorenz

2017-02-01

Confined goats spend a substantial part of the day feeding. A poorly designed feeding place increases the risk of feeding in nonphysiological body postures, and even injury. Scientifically validated information on suitable dimensions of feeding places for loose-housed goats is almost absent from the literature. The aim of the present study was, therefore, to determine feeding place dimensions that would allow goats to feed in a species-appropriate, relaxed body posture. A total of 27 goats with a height at the withers of 62 to 80 cm were included in the study. Goats were tested individually in an experimental feeding stall that allowed the height difference between the feed table, the standing area of the forelegs, and a feeding area step (difference in height between forelegs and hind legs) to be varied. The goats accessed the feed table via a palisade feeding barrier. The feed table was equipped with recesses at varying distances to the feeding barrier (5-55 cm in 5-cm steps) at angles of 30°, 60°, 90°, 120°, or 150° (feeding angle), which were filled with the goats' preferred food. In 18 trials, balanced for order across animals, each animal underwent all possible combinations of feeding area step (3 levels: 0, 10, and 20 cm) and of difference in height between feed table and standing area of forelegs (6 levels: 0, 5, 10, 15, 20, and 25 cm). The minimum and maximum reach at which the animals could reach feed on the table with a relaxed body posture was determined for each combination. Statistical analysis was performed using mixed-effects models. The animals were able to feed with a relaxed posture when the feed table was at least 10 cm higher than the standing height of the goats' forelegs. Larger goats achieved smaller minimum reaches and minimum reach increased if the goats' head and neck were angled. Maximum reach increased with increasing height at withers and height of the feed table. The presence of a feeding area step had no influence on minimum and

Sustainable farming of the mealworm Tenebrio molitor for the production of food and feed.

Science.gov (United States)

Grau, Thorben; Vilcinskas, Andreas; Joop, Gerrit

2017-09-26

The farming of edible insects is an alternative strategy for the production of protein-rich food and feed with a low ecological footprint. The industrial production of insect-derived protein is more cost-effective and energy-efficient than livestock farming or aquaculture. The mealworm Tenebrio molitor is economically among the most important species used for the large-scale conversion of plant biomass into protein. Here, we review the mass rearing of this species and its conversion into food and feed, focusing on challenges such as the contamination of food/feed products with bacteria from the insect gut and the risk of rapidly spreading pathogens and parasites. We propose solutions to prevent the outbreak of infections among farmed insects without reliance on antibiotics. Transgenerational immune priming and probiotic bacteria may provide alternative strategies for sustainable insect farming.

The benefits of authoritative feeding style: caregiver feeding styles and children's food consumption patterns.

Science.gov (United States)

Patrick, Heather; Nicklas, Theresa A; Hughes, Sheryl O; Morales, Miriam

2005-04-01

This research tested the associations between caregiver feeding styles and children's food consumption patterns among African-American (AA) and Hispanic (H) caregivers and their preschool children. Participants were 231 caregivers (101 AA; 130 H) with children enrolled in Head Start. Caregivers completed questionnaires on authoritarian and authoritative feeding styles (Caregiver's Feeding Styles Questionnaire; CFSQ) and various aspects of children's food consumption patterns (availability of, feeding attempts for, and child's consumption of dairy, fruit, and vegetables). Simultaneous multiple regression analyses tested the unique contribution of feeding styles in predicting food consumption patterns. Authoritative feeding was positively associated whereas authoritarian feeding was negatively associated with the availability of fruit and vegetables. Authoritative feeding was also positively associated with attempts to get the child to eat dairy, fruit, and vegetables, and reported child consumption of dairy and vegetables. Authoritarian feeding was negatively associated with child's vegetable consumption. All results remained significant after controlling for child's gender and body mass index (BMI), and caregiver's ethnicity, BMI, and level of education. Overall, results provide evidence for the benefits of authoritative feeding and suggest that interventions to increase children's consumption of dairy, fruit, and vegetables should be targeted toward increasing caregivers' authoritative feeding behaviors.

A potent feed preservative candidate produced by Calcarisporium sp., an endophyte residing in stargrass (Cynodon dactylon).

Science.gov (United States)

Ji, L L; Song, Y C; Tan, R X

2004-01-01

The cultures of an endophytic fungus Calcarisporium sp. were screened for inhibitors on the growth of feed-associated moulds and on the aflatoxin biosynthesis to find a safe and effective feed preservative. Eight test fungi were isolated from the spoiled poultry feed. The endophytic fungus Calcarisporium sp. was separated from the Chinese coastal grass Cynodon dactylon. The antifungal action concerning the endophytic culture extract (ECE) was performed with propionic acid (PPA) as the corresponding reference. The ECE had a similar antifungal efficacy to PPA in a concentration-dependent manner. The susceptibility order of the ECE to the test fungi was found to be Fusarium sp. > Aspergillus spp. > Penicillium spp. Furthermore, the application of the ECE in pelleted-layer duck feed as a preservative was carried out at a humidity of 10, 15 and 20%. It has been discerned that mould growth and aflatoxin biosynthesis could be co-inhibited almost completely by ECE at concentrations higher than 1.0% (w/w). The LD50 of the ECE on mice was shown to be higher than 28 g kg-1. The ECE can be selected as an inhibitor to preserve poultry feed on inhibiting the growth of mould and aflatoxin biosynthesis during feed storage. The ECE may be an effective and biosafe antifungal ingredient for poultry feed and holds a potential market prospect in feed industry.

Fermentation instead of animal feeding; In den Fermenter statt in den Magen des Schweins

Energy Technology Data Exchange (ETDEWEB)

Brombach, T.

2008-07-01

Since 2006, Germany has prohibited the feeding of class K3 waste food from gastronomy, canteens and the food industry to pigs. Fermentation is a creative solution. In Haid on the Schwaebische Alb mountain range, two creative waste managers developed a plant for power generation from fat and used oils. (orig.)

Effects of feeding level and access to rooting material on behaviour of growing pigs in situations with reduced feeding space and delayed feeding

DEFF Research Database (Denmark)

Jensen, Margit Bak; Pedersen, Lene Juul

2010-01-01

Seventy-two pigs, housed in groups of four, were allocated to either (1) ad libitum feeding with access to wood chip, (2) restrictive feeding with access to wood chip or (3) restrictive feeding without access to wood chip. The effects of feeding level (treatment 1 vs. 2) and access to wood chip......, but the level of manipulating floor in these pigs did not reach the level of manipulating wood chip among pigs on treatment 2. During normal days restrictively fed pigs spent less time feeding on a 24 h basis, but more time feeding during the first hour after feed allocation than ad libitum fed pigs. When...

Insects used for animal feed in West Africa

Directory of Open Access Journals (Sweden)

M. Kenis

2014-10-01

Full Text Available In West Africa, as in many parts of the world, livestock and fish farming suffer from the increasing cost of feed, especially protein ingredients, which are hardly available for village poultry farming and small-scale fish farming. Insects, which are a natural food source of poultry and fish and are rich in protein and other valuable nutrients, can be used to improve animal diets, a practice which is now strongly promoted by the FAO as a tool for poverty alleviation. This paper reviews practices and research on the use of insects as animal feed in West Africa and the perspectives to further develop the techniques, in particular for smallholder farmers and fish farmers. The most promising insects are flies, especially the house fly (Musca domestica (Diptera Muscidae and the black soldier fly (Hermetia illucens (Diptera Stratiomyiidae, which can be mass reared on-farm for domestic use, in small production units at the community or industrial level. Flies have the advantage over most other insects of developing on freely available waste material and could even contribute to rural sanitation. Termites are traditionally used by smallholder farmers to feed village poultry. While their mass production is problematic, methods to enhance populations on-farm and facilitate collection can be developed. In any case, new methods will need to demonstrate their economic profitability, social acceptability and environmental sustainability

Pedigree and genomic analyses of feed consumption and residual feed intake in laying hens.

Science.gov (United States)

Wolc, Anna; Arango, Jesus; Jankowski, Tomasz; Settar, Petek; Fulton, Janet E; O'Sullivan, Neil P; Fernando, Rohan; Garrick, Dorian J; Dekkers, Jack C M

2013-09-01

Efficiency of production is increasingly important with the current escalation of feed costs and demands to minimize the environmental footprint. The objectives of this study were 1) to estimate heritabilities for daily feed consumption and residual feed intake and their genetic correlations with production and egg-quality traits; 2) to evaluate accuracies of estimated breeding values from pedigree- and marker-based prediction models; and 3) to localize genomic regions associated with feed efficiency in a brown egg layer line. Individual feed intake data collected over 2-wk trial periods were available for approximately 6,000 birds from 8 generations. Genetic parameters were estimated with a multitrait animal model; methods BayesB and BayesCπ were used to estimate marker effects and find genomic regions associated with feed efficiency. Using pedigree information, feed efficiency was found to be moderately heritable (h(2) = 0.46 for daily feed consumption and 0.47 for residual feed intake). Hens that consumed more feed and had greater residual feed intake (lower efficiency) had a genetic tendency to lay slightly more eggs with greater yolk weights and albumen heights. Regions on chromosomes 1, 2, 4, 7, 13, and Z were found to be associated with feed intake and efficiency. The accuracy from genomic prediction was higher and more persistent (better maintained across generations) than that from pedigree-based prediction. These results indicate that genomic selection can be used to improve feed efficiency in layers.

Effects of feeding un-extruded floating feed to African giant catfish ...

African Journals Online (AJOL)

This study investigated the effects of feeding two types of un-extruded floating fish feeds (HM1 and HM2 –38% CP, produced manually using available feedstuffs) and a commercial imported fish feed (Coppens – 40% CP) on growth performance and body composition of Heterobranchus longifilis over 56 days. Commercial ...

Breastfeeding is best feeding.

Science.gov (United States)

Cutting, W

1995-02-01

The traditional practice of breast feeding is the best means to make sure infants grow up healthy. It costs nothing. Breast milk contains antibodies and other substances which defend against disease, especially those linked to poor food hygiene and inadequate water and sanitation. In developing countries, breast fed infants are at least 14 times less likely to die from diarrhea than those who are not breast fed. Urbanization and promotion of infant formula undermine breast feeding. Even though infants up to age 4-6 months should receive only breast milk to remain as healthy as possible, infants aged less than 4-6 months often receive other milks or gruels. Attendance of health workers at delivery and their contact with mother-infant pairs after delivery are ideal opportunities to encourage mothers to breast feed. In fact, if health workers provide mothers skilled support with breast feeding, mothers are more likely to breast feed well and for a longer time. Health workers need counseling skills and firm knowledge of techniques on breast feeding and of how to master common difficulties to help mothers with breast feeding. Listening skills and confidence building skills are also needed. Good family and work place support allows women in paid employment outside the home to continue breast feeding. Breast feeding is very important in emergency situations where access to water, sanitation, food, and health care is limited (e.g., refugee camps). In these situations, health workers should especially be aware of women's ability to breast feed and to support their breast feeding. HIV can be transmitted to nursing infants from HIV infected mothers. Yet one must balance this small risk against the possibility of contracting other serious infections (e.g., diarrhea) through alternative infant feeding, particularly if there is no access to potable water and sanitation.

ACCELERATING CONSTRUCTION INDUSTRY DEVELOPMENT

Directory of Open Access Journals (Sweden)

Mohan M. Kumaraswamy

2006-06-01

Full Text Available The needs for construction industry development are initially viewed from the broader perspectives of imperatives for infrastructure development and national development. All these are clearly more critical in developing countries. A non-exhaustive set of potential drivers and common barriers to construction industry development is identified from previous research. These suggest the usefulness of consolidating a cluster of recent proposals and exercises aiming at (a construction organization development in terms of an over-arching management support system model, as well as improved information and knowledge management; and (b project team development in the context of relationally integrated teams and supply chains, joint risk management and ‘technology and knowledge exchange’ in joint ventures, as well as longer term public private partnerships. These apparently disparate research thrusts are threaded together into a pattern that may inspire, if not feed, specific research and development (R & D agendas for construction industry development in different countries according to their own priorities, constraints and stages of infrastructure and national development.

Creep feeding nursing beef calves.

Science.gov (United States)

Lardy, Gregory P; Maddock, Travis D

2007-03-01

Creep feeding can be used to increase calf weaning weights. However, the gain efficiency of free-choice, energy-based creep feeds is relatively poor. Generally, limit-feeding, high-protein creep feeds are more efficient, and gains may be similar to those produced by creep feeds offered free choice. Creep feeding can increase total organic matter intake and improve the overall energy status of the animal. Creep-fed calves tend to acclimate to the feedlot more smoothly than unsupplemented calves. Furthermore, provision of a high-starch creep feed may have a positive influence on subsequent carcass quality traits. Creep feeding can be applied to numerous environmental situations to maximize calf performance; however, beef cattle producers should consider their individual situations carefully before making the decision to creep feed.

Feeding proteins to livestock: Global land use and food vs. feed competition

Directory of Open Access Journals (Sweden)

Manceron Stéphane

2014-07-01

Full Text Available Competition between direct consumption of plant production and the feeding of livestock is key to global food availability. This is because livestock consume edible commodities that could be available for (food insecure populations but also because it diverts arable land from food production. The share of total plant production redirected towards feeding livestock is (roughly known but estimations of land surfaces virtually occupied by livestock production are scarce. In this study, following up on the Agrimonde Terra** project, we estimate areas devoted to the feeding livestock. First, we estimate the protein composition of an averaged feed basket at the global scale in 2005 and detail the evolution of the protein-source feed component during the period 1961–2009. We focus on protein-rich crops such as oil crops and show its proportion in the global livestock diets has tripled since 1960, though only accounting for about one fourth of total proteins. Then, we estimate land virtually occupied by crop feed at the global scale using a set of straightforward hypotheses. Our estimates suggest that, although livestock and feed production has continuously increased and despite uncertainties in available data, competition for land between feed and food uses has decreased over the last two decades. The share of areas cultivated for feed requirements decreased from about 50% in the 1970s to 37% nowadays. This trend is attributable to the increase of crop yields and to a decrease of the share of cereals in livestock diets to the benefit of oilseeds by-products. However, estimating the share of total areas used for feed is complicated by the significant role played by by-products.

How to measure the economic impacts of changes in growth, feed efficiency and survival in aquaculture

NARCIS (Netherlands)

Kankainen, M.; Setala, J.; Berrill, I.K.; Ruohonen, K.; Noble, C.; Schneider, O.

2012-01-01

In this article we introduce a variety of bio-economic models that can be used to calculate the economic benefits associated with improved productivity in aquaculture. In the aquaculture industry, three important biological productivity factors are growth, survival and feed efficiency. The

Modelling and Scheduling Autonomous Mobile Robot for a Real-World Industrial Application

DEFF Research Database (Denmark)

Dang, Vinh Quang; Nielsen, Izabela Ewa; Bøgh, Simon

2013-01-01

proposes an approach composing of: a mobile robot system design (“Little Helper”), an appropriate and comprehensive industrial application (multiple-part feeding tasks), an implementation concept for industrial environments (the bartender concept), and a real-time heuristics integrated into Mission...... from the real-time heuristics. The results also demonstrated that the proposed real-time heuristics has capability of finding the best schedule in online production mode....

Characterization of Bacillus spp. strains for use as probiotic additives in pig feed

DEFF Research Database (Denmark)

Larsen, Nadja; Thorsen, Line; Kpikpi, Elmer Nayra

2014-01-01

for use as probiotic additives in pig feed. A total of 245 bacterial isolates derived from African fermented food, feces and soil were identified by 16S rRNA gene sequencing and screened for antimicrobial activity and growth in the presence of antibiotics, bile salts and at pH 4.0. Thirty-three Bacillus......Bacillus spp. are commonly used as probiotic species in the feed industry, however, their benefits need to be confirmed. This study describes a high throughput screening combined with the detailed characterization of endospore-forming bacteria with the aim to identify new Bacillus spp. strains...

Effects of dietary tannin on growth, feed utilization and digestibility, and carcass composition in juvenile European seabass ( Dicentrarchus labrax L.)

OpenAIRE

Omnes, Marie-Hélène; Le Goasduff, Julien; Le Delliou, Hervé; Le Bayon, Nicolas; Quazuguel, Patrick; Robin, Jean H.

2017-01-01

Plant-based products in fish diets are valuable protein alternatives to fishmeal for the aquafeed industry. Many plant feed ingredients contain polyphenolic compounds, including tannins, which can have beneficial or adverse effects. The tolerable threshold of ingested tannins is unknown for marine carnivorous fishes. We studied the effects of tannic acid (TA) supplementation to the diet of juvenile European seabass (Dicentrarchus labrax) by measuring growth, feed utilization and digestibility...

ESTIMATION OF AFLATOXIN B1 IN FEED INGREDIENTS AND COMPOUND POULTRY FEEDS

Directory of Open Access Journals (Sweden)

Bashir Mahmood Bhatti, Tanzeela Talat and Rozina Sardar

2001-02-01

Full Text Available A total of 3230 samples of feed ingredients of vegetable and animal origin and commercially available compound poultry feed received over a period of 5 years at Feed Testing Laboratory of the Institute were tested for Aflatoxin B1 contents (ppb . In all feed ingredients and compound feed stuffs, minimum level of aflatoxin B1 was 13 ppb and maximum level was found to be 78 ppb. No correlation of aflatoxin levels with month of collection of the year which are subject to variation in temperature and humidity could be detected. Mean values of aflatoxin concentration in feed stuffs such as rice, rice polish, wheat bran, wheat bread, maize, fish meal, blood meal, bone meal, guar meal, corn gluten 30%, corn gluten 60%, sun flower meal, soyabean meal and cotton seed meal were found to be higher than safe level of 20 ppb recommended by FDA.

Newborn First Feed and Prelacteal Feeds in Mansoura, Egypt

Directory of Open Access Journals (Sweden)

Abdel-Hady El-Gilany

2014-01-01

Full Text Available Background. Prelacteal feed (feeding any other substance before first breastfeeding appears to be common despite its harmful effects. By definition a child provided with prelacteal feed (PLF is not exclusively breastfed and PLF has many implications for the success and early initiation of breastfeeding. Objectives. To describe the prevalence of, nature of, and reasons for and factors associated with PLF. Methods. 647 mother-infant dyads were studied. Data was collected about the sociodemographic features of the family and baby, maternity care, the type of first feed before suckling, and causes of PLF. Maternal weight and height were measured and body mass index was calculated. Results. About 58% of newborns received prelacteal feeds. The commonest PLF was sugar/glucose water (39.6%. The most frequent reasons for giving PLF are tradition (61.0% and mother’s/mother in law’s advice (58.3%. The logistic regression revealed that the independent predictors of PLF are urban residence; maternal education; father’s education; low, middle, and high social class; maternal obesity; receiving antenatal care at private clinics and no antenatal care; Caesarean section; female babies; low birth weight; and admission to neonatal intensive care. Conclusion. Indiscriminate use of PLF should be discouraged in medical education and in antenatal maternal health education.

Use of pig by-products (bristles and hooves) as alternative protein raw material in fish feed

DEFF Research Database (Denmark)

Gachango, Florence Gathoni; Ekmann, K.S.; Frørup, J.

2017-01-01

Increasing growth in the aquaculture industry calls for employment of innovative technologies that will ensure sustainability in the sector, given the rising competition for feed raw material. A technology that can convert low quality biological waste resources such as pig bristles and hooves int...

'The midwives aren't allowed to tell you': perceived infant feeding policy restrictions in a formula feeding culture - the Feeding Your Baby Study.

Science.gov (United States)

Lagan, Briege M; Symon, Andrew; Dalzell, Janet; Whitford, Heather

2014-03-01

to explore the expectations and experiences of postnatal mothers in relation to infant feeding, and to identify how care could be improved. this study used a qualitative, exploratory, descriptive design. Data were collected through one to one in-depth semi-structured interviews and focus groups. Tayside area of Eastern Scotland. seven focus group interviews (n=38 participants) and 40 semi-structured one-to-one interviews with mothers with a range of infant feeding experiences i.e. exclusively breast fed; started breast feeding but changed to formula milk before 16 weeks; exclusively formula fed; or who concurrently breast and formula fed their infant. a principal theme of 'Mixed and missing messages' emerged, incorporating 'Conflicting advice', 'Information gaps' and 'Pressure to breast feed' with a secondary theme of 'Emotional costs'. Several problems were identified with how women were given information, how infant feeding discussions were held, and the type of support available after the infant is born. there was a strong perception that some midwives are not 'allowed' to discuss or provide information on formula feeding, and the women reported feeling pressurised to breast feed. Current interpretation of guidance from the UNICEF UK Baby Friendly Initiative may be restricting antenatal discussions about infant feeding. The combination of this partial preparation antenatally and postnatal support that was often inconsistent seems to incur a counter-productive emotional cost. at strategic, policy and practice levels the infant feeding message needs to change to encourage a more woman-centred focus including discussions about the realities of all types of infant feeding. It is important that health providers continue to promote and support breast feeding; and that effective services are provided to women who wish to breast feed to help them to do so. However provision of information about all aspects of feeding is needed as well as support for women who do not

Effect of feeding frequency and feeding rate on growth of ...

African Journals Online (AJOL)

Effect of feeding frequency and feeding rate on growth of Oreochromis mossambicus (Teleostei: Cichlidae) fry. ... Weight gain, specific growth rate and gross food conversion ratio were significantly affected by ... AJOL African Journals Online.

Wideband feeds for the upgraded GMRT

International Nuclear Information System (INIS)

Bandari, Hanumanth Rao; Sankarasubramanian, G; Kumar, A Praveen

2013-01-01

This paper describes the existing feeds in use at the GMRT Observatory and details the ongoing development of next generation wideband feeds for the upgraded GMRT. The existing feeds include: feed with folded thick dipoles (for 150 MHz), dipole-disc feed (for 325 MHz), dual-band coaxial feed (for 233 MHZ and 610 MHz), and corrugated horn feed (for 1400–1450 MHz). The new broadband feeds covered in this paper are: cone-dipole feeds for 250–500 and 500–1000 MHz, wideband horn feed for 550–900 MHz, and dual ring feed for 130–260 MHz. Design techniques and performance results for these are described.

Feeding tube insertion - gastrostomy

Science.gov (United States)

... this page: //medlineplus.gov/ency/article/002937.htm Feeding tube insertion - gastrostomy To use the sharing features on this page, please enable JavaScript. A gastrostomy feeding tube insertion is the placement of a feeding ...

The effect of a self-efficacy-based educational programme on maternal breast feeding self-efficacy, breast feeding duration and exclusive breast feeding rates: A longitudinal study.

Science.gov (United States)

Chan, Man Yi; Ip, Wan Yim; Choi, Kai Chow

2016-05-01

breast feeding has a number of well-documented benefits. Numerous studies have been conducted to investigate an effective approach to increase the breast feeding rate, duration and exclusive breast feeding rate, in which maternal breast feeding self-efficacy was determined as one of the major contributors. Although numerous breast feeding educational programmes have been developed to enhance maternal breastfeeding self-efficacy, results on the effectiveness of these programmes remain inconclusive. this study aims to investigate the effectiveness of a self-efficacy-based breast feeding educational programme (SEBEP) in enhancing breast feeding self-efficacy, breast feeding duration and exclusive breast feeding rates among mothers in Hong Kong. eligible pregnant women were randomized to attend a 2.5-hour breast feeding workshop at 28-38 weeks of gestation and receive 30-60minutes of telephone counselling at two weeks post partum, whereas both intervention and control groups received usual care. At two weeks postpartum, the Breast feeding Self-Efficacy Scale-Short Form (BSES-SF) and a self-developed post partum questionnaire were completed via telephone interviews. The breast feeding duration, pattern of breast feeding and exclusive breast feeding rates were recorded at two weeks, four weeks, eight weeks and six months post partum. results of analyses based on an intention-to-treat (ITT) assumption showed a significant difference (p<0.01) in the change in BSES-SF mean scores between the mothers who received SEBEP and those who did not receive SEBEP at two weeks post partum. The exclusive breast feeding rate was 11.4% for the intervention group and 5.6% for the control group at six months post partum. the findings of this study highlight the feasibility of a major trial to implement breast feeding education targeted at increasing breast feeding self-efficacy and exclusive breast feeding rates in Hong Kong. Copyright © 2016 Elsevier Ltd. All rights reserved.

Feeding broiler breeders to improve their welfare whilst maintaining productivity

DEFF Research Database (Denmark)

Steenfeldt, Sanna; Nielsen, Birte Lindstrøm

of their litter may have affected their thermoregulation. This experiment indicates that high fibre diets can alleviate the feeling of hunger currently experienced by broiler breeders, and a high ratio of insoluble fibre can reduce stereotypies and may improve the well-being of the birds.......In the present experiment different types of fibre sources were used in high fibre diets to increase feeding quantity whilst limiting the growth of broiler breeders to industry recommended levels. Using scatter feeding, three diets (CON, commercial control diet; INF, high insoluble fibre content......; and SOF, high soluble fibre content) were each fed to 10 groups of 12 broiler breeder chickens (age: 2 to 15 weeks). Similar growth rates were obtained on different quantities of food (e.g. food allocation in week 14: approx. 80, 100, and 130 g/d for CON, INF, and SOF, respectively) with all birds...

Breastfeeding vs. Formula Feeding

Science.gov (United States)

... for Educators Search English Español Breastfeeding vs. Formula Feeding KidsHealth / For Parents / Breastfeeding vs. Formula Feeding What's ... work with a lactation specialist. All About Formula Feeding Commercially prepared infant formulas are a nutritious alternative ...

The effect of passive immunization against ghrelin on feed and water intake in turkeys.

Science.gov (United States)

Vizcarra, J A; Wright, H; Vizcarra, A

2012-09-01

Five-week-old turkeys were used to evaluate the effect of passive immunization against ghrelin on feed and water intake and animal behavior. In experiment 1, females were reared using normal feeding and lighting management recommended by the industry. At 5 wk of age (d 0 of experiment 1), birds (n = 40) were individually caged (0.65 × 0.4 × 0.4 m) with free access to feed and water. Feed and water intake were measured 3 times a day (0800, 1200, and 1700 h) by recording the weight of feed or water offered minus any unconsumed feed or water remaining. After 3 d of adaptation to the cages (d 3), birds were stratified by BW and feed consumption and randomly assigned to a 2 × 5 factorial arrangement of treatment. Starting on d 3, turkeys were given intravenous (iv) injections (0.5, 1.0, 2.0, 4.0, or 8.0 mL) of pooled undiluted plasma obtained from pigs that were previously actively immunized against ghrelin or iv injections (0.5, 1.0, 2.0, 4.0, or 8.0 mL) of pooled undiluted plasma, obtained from nonimmunized pigs (control). In experiment 2, the 2 highest doses (i.e., 4.0 and 8.0 mL; n = 4/treatment) were repeated in a 2 × 2 factorial arrangement as described in experiment 1. A laptop computer with a built-in color camera and appropriate software was used to record birds for 9 consecutive hours, starting 4 h before treatments were applied. Video clips were saved and a human observer watched and annotated bird behavior associated with feeding, drinking, and standing. Passively immunized birds increased feed consumption (P = 0.04) compared with control animals. Water intake was not affected by treatments. There was a tendency for immunized birds to increase the number of pecks per hour and the amount of time devoted for feeding. Our data suggest that in turkeys, the effect of immunization against ghrelin on feed intake is the opposite of that observed in mammalian species.

Screening and characterizing of xylanolytic and xylose-fermenting yeasts isolated from the wood-feeding termite, Reticulitermes chinensis.

Directory of Open Access Journals (Sweden)

Sameh Samir Ali

Full Text Available The effective fermentation of xylose remains an intractable challenge in bioethanol industry. The relevant xylanase enzyme is also in a high demand from industry for several biotechnological applications that inevitably in recent times led to many efforts for screening some novel microorganisms for better xylanase production and fermentation performance. Recently, it seems that wood-feeding termites can truly be considered as highly efficient natural bioreactors. The highly specialized gut systems of such insects are not yet fully realized, particularly, in xylose fermentation and xylanase production to advance industrial bioethanol technology as well as industrial applications of xylanases. A total of 92 strains from 18 yeast species were successfully isolated and identified from the gut of wood-feeding termite, Reticulitermes chinensis. Of these yeasts and strains, seven were identified for new species: Candida gotoi, Candida pseudorhagii, Hamamotoa lignophila, Meyerozyma guilliermondii, Sugiyamaella sp.1, Sugiyamaella sp. 2, and Sugiyamaella sp.3. Based on the phylogenetic and phenotypic characterization, the type strain of C. pseudorhagii sp. nov., which was originally designated strain SSA-1542T, was the most frequently occurred yeast from termite gut samples, showed the highly xylanolytic activity as well as D-xylose fermentation. The highest xylanase activity was recorded as 1.73 and 0.98 U/mL with xylan or D-xylose substrate, respectively, from SSA-1542T. Among xylanase-producing yeasts, four novel species were identified as D-xylose-fermenting yeasts, where the yeast, C. pseudorhagii SSA-1542T, showed the highest ethanol yield (0.31 g/g, ethanol productivity (0.31 g/L·h, and its fermentation efficiency (60.7% in 48 h. Clearly, the symbiotic yeasts isolated from termite guts have demonstrated a competitive capability to produce xylanase and ferment xylose, suggesting that the wood-feeding termite gut is a promising reservoir for novel

The influence of elevated feed stalls on feeding behaviour of lactating dairy cows

Directory of Open Access Journals (Sweden)

Barbara Benz

2014-10-01

Full Text Available The performance level of high yielding cows can only be guaranteed by high quality forage and high feed intake. An about 15–20 cm elevated and 160 cm long feed stall with rubber flooring doesn’t only offer undisturbed meals but also a yielding and dry standing surface. In a pilot stable with 130 dairy cows (German Simmental the feeding alley was subsequently equipped with elevated feed stalls. The results show that animals frequented the feeding barn less often while the duration of single meals prolonged. The specific behavioural changes differed depending on milk yield and number of lactation.

Shrimp Feed Formulation via Evolutionary Algorithm with Power Heuristics for Handling Constraints

Directory of Open Access Journals (Sweden)

Rosshairy Abd. Rahman

2017-01-01

Full Text Available Formulating feed for shrimps represents a challenge to farmers and industry partners. Most previous studies selected from only a small number of ingredients due to cost pressures, even though hundreds of potential ingredients could be used in the shrimp feed mix. Even with a limited number of ingredients, the best combination of the most appropriate ingredients is still difficult to obtain due to various constraint requirements, such as nutrition value and cost. This paper proposes a new operator which we call Power Heuristics, as part of an Evolutionary Algorithm (EA, which acts as a constraint handling technique for the shrimp feed or diet formulation. The operator is able to choose and discard certain ingredients by utilising a specialized search mechanism. The aim is to achieve the most appropriate combination of ingredients. Power Heuristics are embedded in the EA at the early stage of a semirandom initialization procedure. The resulting combination of ingredients, after fulfilling all the necessary constraints, shows that this operator is useful in discarding inappropriate ingredients when a crucial constraint is violated.

Use of nuclear and related techniques to develop simple tannin assays for predicting and improving the safety and efficiency of feeding ruminants on tanniniferous tree foliage: Achievements, result implications, and future research

Energy Technology Data Exchange (ETDEWEB)

Makkar, H.P.S. [Animal Production and Health Section, Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture, International Atomic Energy Agency, Vienna (Austria)]. E-mail: h.makkar@iaea.org

2005-08-19

The utilization of unconventional feed resources holds great relevance to developing countries, where the main constraint to livestock development is the scarcity and fluctuation of the quality and quantity of the year-around animal feed supply. There is a serious shortage in concentrated animal feeds such as soybean, cottonseed and groundnut meals, etc. In addition, the human population is increasingly rapidly and arable land is decreasing, due to solid degradation, urbanization and industrialization. Production of grain in developing countries is mostly for human consumption. Novel approaches through the utilization of tree leaves, agro-industrial by-products, aquatic sources are required to bridge the gap between supply and demand of feeds. As the demand for food rises, including that of animal origin, unconventional feed resources including tanninferous plants must play an increasingly important part in the diet of animals, in particular for ruminants in smallholder farming systems in developing countries.

Use of nuclear and related techniques to develop simple tannin assays for predicting and improving the safety and efficiency of feeding ruminants on tanniniferous tree foliage: Achievements, result implications, and future research

International Nuclear Information System (INIS)

Makkar, H.P.S.

2005-01-01

The utilization of unconventional feed resources holds great relevance to developing countries, where the main constraint to livestock development is the scarcity and fluctuation of the quality and quantity of the year-around animal feed supply. There is a serious shortage in concentrated animal feeds such as soybean, cottonseed and groundnut meals, etc. In addition, the human population is increasingly rapidly and arable land is decreasing, due to solid degradation, urbanization and industrialization. Production of grain in developing countries is mostly for human consumption. Novel approaches through the utilization of tree leaves, agro-industrial by-products, aquatic sources are required to bridge the gap between supply and demand of feeds. As the demand for food rises, including that of animal origin, unconventional feed resources including tanninferous plants must play an increasingly important part in the diet of animals, in particular for ruminants in smallholder farming systems in developing countries

Relationships between residual feed intake, average daily gain, and feeding behavior in growing dairy heifers.

Science.gov (United States)

Green, T C; Jago, J G; Macdonald, K A; Waghorn, G C

2013-05-01

Residual feed intake (RFI) is a measure of an individual's efficiency in utilizing feed for maintenance and production during growth or lactation, and is defined as the difference between the actual and predicted feed intake of that individual. The objective of this study was to relate RFI to feeding behavior and to identify behavioral differences between animals with divergent RFI. The intakes and body weight (BW) of 1,049 growing dairy heifers (aged 5-9 mo; 195 ± 25.8 kg of BW) in 5 cohorts were measured for 42 to 49 d to ascertain individual RFI. Animals were housed in an outdoor feeding facility comprising 28 pens, each with 8 animals and 1 feeder per pen, and were fed a dried, cubed alfalfa diet. This forage diet was chosen because most dairy cows in New Zealand are grazed on ryegrass-dominant pastures, without grain or concentrates. An electronic feed monitoring system measured the intake and feeding behavior of individuals. Feeding behavior was summarized as daily intake, daily feeding duration, meal frequency, feeding rate, meal size, meal duration, and temporal feeding patterns. The RFI was moderately to strongly correlated with intake in all cohorts (r=0.54-0.74), indicating that efficient animals ate less than inefficient animals, but relationships with feeding behavior traits (meal frequency, feeding duration, and feeding rate) were weak (r=0.14-0.26), indicating that feeding behavior cannot reliably predict RFI in growing dairy heifers. Comparison of the extremes of RFI (10% most and 10% least efficient) demonstrated similar BW and average daily gain for both groups, but efficient animals ate less; had fewer, longer meals; shorter daily feeding duration; and ate more slowly than the least-efficient animals. These groups also differed in their feeding patterns over 24h, with the most efficient animals eating less and having fewer meals during daylight (0600 to 2100 h), especially during the afternoon (1200 to 1800 h), but ate for a longer time during

Harnessing the genetics of the modern dairy cow to continue improvements in feed efficiency.

Science.gov (United States)

VandeHaar, M J; Armentano, L E; Weigel, K; Spurlock, D M; Tempelman, R J; Veerkamp, R

2016-06-01

Feed efficiency, as defined by the fraction of feed energy or dry matter captured in products, has more than doubled for the US dairy industry in the past 100 yr. This increased feed efficiency was the result of increased milk production per cow achieved through genetic selection, nutrition, and management with the desired goal being greater profitability. With increased milk production per cow, more feed is consumed per cow, but a greater portion of the feed is partitioned toward milk instead of maintenance and body growth. This dilution of maintenance has been the overwhelming driver of enhanced feed efficiency in the past, but its effect diminishes with each successive increment in production relative to body size and therefore will be less important in the future. Instead, we must also focus on new ways to enhance digestive and metabolic efficiency. One way to examine variation in efficiency among animals is residual feed intake (RFI), a measure of efficiency that is independent of the dilution of maintenance. Cows that convert feed gross energy to net energy more efficiently or have lower maintenance requirements than expected based on body weight use less feed than expected and thus have negative RFI. Cows with low RFI likely digest and metabolize nutrients more efficiently and should have overall greater efficiency and profitability if they are also healthy, fertile, and produce at a high multiple of maintenance. Genomic technologies will help to identify these animals for selection programs. Nutrition and management also will continue to play a major role in farm-level feed efficiency. Management practices such as grouping and total mixed ration feeding have improved rumen function and therefore efficiency, but they have also decreased our attention on individual cow needs. Nutritional grouping is key to helping each cow reach its genetic potential. Perhaps new computer-driven technologies, combined with genomics, will enable us to optimize management for

Feeding on dispersed vs. aggregated particles: The effect of zooplankton feeding behavior on vertical flux

DEFF Research Database (Denmark)

Koski, Marja; Boutorh, Julia; De La Rocha, Christina L.

2017-01-01

Zooplankton feeding activity is hypothesized to attenuate the downward flux of elements in the ocean. We investigated whether the zooplankton community composition could influence the flux attenuation, due to the differences of feeding modes (feeding on dispersed vs. aggregated particles) and of ......Zooplankton feeding activity is hypothesized to attenuate the downward flux of elements in the ocean. We investigated whether the zooplankton community composition could influence the flux attenuation, due to the differences of feeding modes (feeding on dispersed vs. aggregated particles...

Influence of limit-feeding and time of day of feed availability to growing calves on growth performance and feeding behavior in cold weather.

Science.gov (United States)

Prezotto, L D; Gilbery, T C; Bauer, M L; Islas, A; Swanson, K C

2017-11-01

Objective swere to determine the effects of limit-feeding and time of feed access in cold weather on growth performance and feeding behavior of growing calves fed a corn silage-based diet. Sixty-six steers (BW = 317 ± 5.3 kg) and 30 heifers (BW = 239 ± 7.6 kg) were assigned randomly to dietary treatment: 1) ad libitum feed intake (AL), 2) limit-fed to 80% of the average DMI of the AL group on a BW basis in the daytime (0601-1759 h; LF-D), 3) limit-fed to 80% of the average DMI of the AL group on a BW basis in the nighttime (1800-0559 h; LF-N), and 4) limit-fed to 80% of the average DMI of the AL group on a BW basis, split 1/2 in the daytime and 1/2 in the nighttime (LF-S). Feed intake and feeding behavior were monitored over 84 d using the Insentec feeding system. Average daily gain, DMI, and G:F were greater ( ≤ 0.002) in the AL group compared with others. Dry matter intake was not different ( = 0.17) when comparing the LF-D with the LF-N groups. Average daily gain and G:F were greater ( ≤ 0.05) when comparing the LF-N group to the LF-D group, and were not different ( ≥ 0.51) when comparing the LF-S group with the mean of the LF-D and LF-N groups. Number of visits and meals per d was greater ( ≤ 0.001) in the LF-N than the LF-D group. Feed intake per visit was not different ( = 0.55) when comparing the AL group and others, and tended to be greater ( = 0.06) in the LF-D than the LF-N group. Feed intake per meal was greater ( Feed intake per minute (eating rate) was not influenced by treatment. In conclusion, limit-feeding at 80% of ad libitum intake decreased ADG and G:F. Limit-feeding in the nighttime as compared to limit-feeding in the daytime improves growth performance and increases feeding activity (number of visits and meals per d) which could be because of increased heat production to help maintain body temperature and thus reduce maintenance energy requirements.

Microarray analysis of subcutaneous adipose tissue from mature cows with divergent body weight gain after feed restriction and realimentation

Directory of Open Access Journals (Sweden)

H.C. Cunningham

2018-02-01

Full Text Available Body weight response to periods of feed restriction and realimentation is critical and relevant to the agricultural industry. The purpose of this study was to evaluate differentially expressed genes identified in subcutaneous adipose tissue collected from cows divergent in body weight (BW gain after feed restriction and realimentation. We compared adipose samples from cows with greater gain based on average daily gain (ADG during realimentation with samples from cows with lesser gain. Specifically, there were four comparisons including two comparing the high and low gain animals across each feeding period (feed restriction and realimentation and two that compared differences in feed restriction and realimentation across high or low gain classifications. Using microarray analysis, we provide a set of differentially expressed genes identified between the high and low gain at both periods of nutrient restriction and realimentation. These data identify multiple differentially expressed genes between these two phenotypes across both nutritional environments. Keywords: Beef cows, Subcutaneous fat, Transcriptome

Engineering of tomato for the sustainable production of ketocarotenoids and its evaluation in aquaculture feed.

Science.gov (United States)

Nogueira, Marilise; Enfissi, Eugenia M A; Martínez Valenzuela, Maria E; Menard, Guillaume N; Driller, Richard L; Eastmond, Peter J; Schuch, Wolfgang; Sandmann, Gerhard; Fraser, Paul D

2017-10-10

Ketocarotenoids are high-value pigments used commercially across multiple industrial sectors as colorants and supplements. Chemical synthesis using petrochemical-derived precursors remains the production method of choice. Aquaculture is an example where ketocarotenoid supplementation of feed is necessary to achieve product viability. The biosynthesis of ketocarotenoids, such as canthaxanthin, phoenicoxanthin, or astaxanthin in plants is rare. In the present study, complex engineering of the carotenoid pathway has been performed to produce high-value ketocarotenoids in tomato fruit (3.0 mg/g dry weight). The strategy adopted involved pathway extension beyond β-carotene through the expression of the β-carotene hydroxylase ( CrtZ ) and oxyxgenase ( CrtW ) from Brevundimonas sp. in tomato fruit, followed by β-carotene enhancement through the introgression of a lycopene β-cyclase (β- Cyc ) allele from a Solanum galapagense background. Detailed biochemical analysis, carried out using chromatographic, UV/VIS, and MS approaches, identified the predominant carotenoid as fatty acid (C14:0 and C16:0) esters of phoenicoxanthin, present in the S stereoisomer configuration. Under a field-like environment with low resource input, scalability was shown with the potential to deliver 23 kg of ketocarotenoid/hectare. To illustrate the potential of this "generally recognized as safe" material with minimal, low-energy bioprocessing, two independent aquaculture trials were performed. The plant-based feeds developed were more efficient than the synthetic feed to color trout flesh (up to twofold increase in the retention of the main ketocarotenoids in the fish fillets). This achievement has the potential to create a new paradigm in the renewable production of economically competitive feed additives for the aquaculture industry and beyond.

Engineering of tomato for the sustainable production of ketocarotenoids and its evaluation in aquaculture feed

Science.gov (United States)

Nogueira, Marilise; Enfissi, Eugenia M. A.; Martínez Valenzuela, Maria E.; Menard, Guillaume N.; Driller, Richard L.; Eastmond, Peter J.; Schuch, Wolfgang; Sandmann, Gerhard; Fraser, Paul D.

2017-01-01

Ketocarotenoids are high-value pigments used commercially across multiple industrial sectors as colorants and supplements. Chemical synthesis using petrochemical-derived precursors remains the production method of choice. Aquaculture is an example where ketocarotenoid supplementation of feed is necessary to achieve product viability. The biosynthesis of ketocarotenoids, such as canthaxanthin, phoenicoxanthin, or astaxanthin in plants is rare. In the present study, complex engineering of the carotenoid pathway has been performed to produce high-value ketocarotenoids in tomato fruit (3.0 mg/g dry weight). The strategy adopted involved pathway extension beyond β-carotene through the expression of the β-carotene hydroxylase (CrtZ) and oxyxgenase (CrtW) from Brevundimonas sp. in tomato fruit, followed by β-carotene enhancement through the introgression of a lycopene β-cyclase (β-Cyc) allele from a Solanum galapagense background. Detailed biochemical analysis, carried out using chromatographic, UV/VIS, and MS approaches, identified the predominant carotenoid as fatty acid (C14:0 and C16:0) esters of phoenicoxanthin, present in the S stereoisomer configuration. Under a field-like environment with low resource input, scalability was shown with the potential to deliver 23 kg of ketocarotenoid/hectare. To illustrate the potential of this “generally recognized as safe” material with minimal, low-energy bioprocessing, two independent aquaculture trials were performed. The plant-based feeds developed were more efficient than the synthetic feed to color trout flesh (up to twofold increase in the retention of the main ketocarotenoids in the fish fillets). This achievement has the potential to create a new paradigm in the renewable production of economically competitive feed additives for the aquaculture industry and beyond. PMID:28973873

Research of Talent Development Policy of Online Game Industry

Directory of Open Access Journals (Sweden)

Yun-Che Yang

2003-12-01

Full Text Available Due to the progress of information technology and the development of Internet, the digital content industry has become one of the most promising industries in the 21st century. The rapid growth of the online gaming industry at the turn of the century does not only catch the eyes of the whole world, but also reshape the entire information-related industry. The purpose of this study is to explore issue of the talent development policy of the domestic online game industry. The method of in-depth interview is used in this study, and the research target is chosen to be qualified of speaking for the government, the education institutes, and the private sectors in the industry. The findings of this research suggest that Taiwan's government should take up a more vigorous responsibility. Following the government's leadership, both education institutes and industry private sectors must actively participate in the collaboration and feed back the up-dated information, such as the market trend and most wanted human resources, to the policy makers.[Article content in Chinese

Effect of Ochratoxin A on Body Weight, Feed Intake and Feed Conversion in Broiler Chicken

Directory of Open Access Journals (Sweden)

Sigamani Masilamani Sakthivelan

2010-01-01

Full Text Available The effect of ochratoxin A (OA on the body weight, feed intake, and feed conversion was investigated in broiler chicken fed dietary levels of OA at 0, 1, and 2 ppm for 28 days from hatch. Feeding OA significantly reduced the growth rate of broiler chicken. The reduction was observed from the first week onwards in OA-treated groups. Feed consumption and feed conversion also showed a diminishing trend from the first week of feeding toxin. Its implication on the performance of broiler chicken is discussed.

Fungal and bacterial metabolites in commercial poultry feed from Nigeria.

Science.gov (United States)

Ezekiel, C N; Bandyopadhyay, R; Sulyok, M; Warth, B; Krska, R

2012-08-01

Metabolites of toxigenic fungi and bacteria occur as natural contaminants (e.g. mycotoxins) in feedstuffs making them unsafe to animals. The multi-toxin profiles in 58 commercial poultry feed samples collected from 19 districts in 17 states of Nigeria were determined by LC/ESI-MS/MS with a single extraction step and no clean-up. Sixty-three (56 fungal and seven bacterial) metabolites were detected with concentrations ranging up to 10,200 µg kg⁻¹ in the case of aurofusarin. Fusarium toxins were the most prevalent group of fungal metabolites, whereas valinomycin occurred in more than 50% of the samples. Twelve non-regulatory fungal and seven bacterial metabolites detected and quantified in this study have never been reported previously in naturally contaminated stored grains or finished feed. Among the regulatory toxins in poultry feed, aflatoxin concentrations in 62% of samples were above 20 µg kg⁻¹, demonstrating high prevalence of unsafe levels of aflatoxins in Nigeria. Deoxynivalenol concentrations exceeded 1000 µg kg⁻¹ in 10.3% of samples. Actions are required to reduce the consequences from regulatory mycotoxins and understand the risks of the single or co-occurrence of non-regulatory metabolites for the benefit of the poultry industry.

High-Fibre feeding in gestation

NARCIS (Netherlands)

Meunier-Salaün, M.C.; Bolhuis, J.E.

2015-01-01

Gestating sows are usually fed low levels of feed, which may not provide sufficient satiety, and does not allow sows to fully fulfil their motivation to express foraging and feeding behaviours. Feed restriction may therefore lead to high occurrences of non-feeding oral activities, including

PERENCANAAN PENGEMBANGAN KAWASAN JAGUNG SEBAGAI BAHAN BAKU INDUSTRI PAKAN DI KABUPATEN CIAMIS

OpenAIRE

Mustika Gusnia Sari; Khursatul Munibah; Untung Sudadi

2015-01-01

Poultry development sector in Ciamis has effected an increasing in maize production as a raw material for feed. In period 2008-2012, the production of maize in Ciamis Region is 45.883 tons, meanwhile, the demand is 17.000 tons, consequently  the Ciamis District supposed to be able to fulfill the demand; however, but currently the feed industry in Ciamis are still importing the maize. Cluster development might be one of solution for this problem. The aims of this research are: (1) Analyzing la...

Feed intake, growth and feed utilization patterns of pigs highly ...

African Journals Online (AJOL)

Mean daily live mass gain was, however, 174 g/day (20,5%) more for the Large White boars and feed conversion16,5% ... of protein and fat in genetically lean and obese pigs, and showed that feed ..... regulation of growth and production.

Feeding tube - infants

Science.gov (United States)

... this page: //medlineplus.gov/ency/article/007235.htm Feeding tube - infants To use the sharing features on this page, please enable JavaScript. A feeding tube is a small, soft, plastic tube placed ...

Hydraulic design of a boiler feed pump to ensure stable operation at reduced flows

International Nuclear Information System (INIS)

Singal, R.K.

1991-01-01

The boiler feed pumps for industrial and power station boilers have to operate often at reduced capacities to meet the changing demand of steam and electricity. The operation of centrifugal pumps at reduced capacities lead to a number of unfavourable results seriously affecting the pump reliability. Some of these, such as internal recirculation of flow inside the pump have been recently studied. The paper discusses these unfavourable results and analyses various design factors which can control unstable operation of the pumps at reduced flows. The commissioning problems of boiler feed pumps faced at Rajasthan Atomic Power Plant at Kota and modifications carried out in the light of the above studies are described in the paper. (author). 2 tabs

Feeding Your Baby

Medline Plus

Full Text Available ... Frequently asked questions Email sign up Join our online community Home > Baby > Feeding your baby Feeding your baby E-mail to a friend Please fill in all fields. Please enter a ...

Feeding Your Baby

Medline Plus

Full Text Available ... Home > Baby > Feeding your baby Feeding your baby E-mail to a friend Please fill in all fields. Please enter a valid e-mail address. Your information: Your recipient's information: Your ...

More feed efficient sheep produce less methane and carbon dioxide when eating high-quality pellets.

Science.gov (United States)

Paganoni, B; Rose, G; Macleay, C; Jones, C; Brown, D J; Kearney, G; Ferguson, M; Thompson, A N

2017-09-01

The Australian sheep industry aims to increase the efficiency of sheep production by decreasing the amount of feed eaten by sheep. Also, feed intake is related to methane production, and more efficient (low residual feed intake) animals eat less than expected. So we tested the hypothesis that more efficient sheep produce less methane by investigating the genetic correlations between feed intake, residual feed intake, methane, carbon dioxide, and oxygen. Feed intake, methane, oxygen, and carbon dioxide were measured on Merino ewes at postweaning (1,866 at 223 d old), hogget (1,010 sheep at 607 d old), and adult ages (444 sheep at 1,080 d old). Sheep were fed a high-energy grower pellet ad libitum for 35 d. Individual feed intake was measured using automated feeders. Methane was measured using portable accumulation chambers up to 3 times during this feed intake period. Heritabilities and phenotypic and genotypic correlations between traits were estimated using ASReml. Oxygen (range 0.10 to 0.20) and carbon dioxide (range 0.08 to 0.28) were generally more heritable than methane (range 0.11 to 0.14). Selecting to decrease feed intake or residual feed intake will decrease methane (genetic correlation [] range 0.76 to 0.90) and carbon dioxide ( range 0.65 to 0.96). Selecting to decrease intake ( range 0.64 to 0.78) and methane ( range 0.81 to 0.86) in sheep at postweaning age would also decrease intake and methane in hoggets and adults. Furthermore, selecting for lower residual feed intake ( = 0.75) and carbon dioxide ( = 0.90) in hoggets would also decrease these traits in adults. Similarly, selecting for higher oxygen ( = 0.69) in hoggets would also increase this trait in adults. Given these results, the hypothesis that making sheep more feed efficient will decrease their methane production can be accepted. In addition, carbon dioxide is a good indicator trait for feed intake because it has the highest heritability of the gas traits measured; is cheaper, faster, and

Utilization of lime-dried sludge for eco-cement clinker production: effects of different feeding points.

Science.gov (United States)

Cao, Haihua; Liu, Wei; Xu, Jingcheng; Liu, Jia; Huang, Juwen; Huang, Xiangfeng; Li, Guangming

2018-02-01

Co-processing lime-dried sludge (LDS) in cement kilns is an appropriate technique to solve the problem of LDS disposal and promote the sustainable development for cement industry. However, there were limited studies that investigated the effects of feeding points on product quality and cement kiln emissions. In this study, simulated experiments were conducted by dividing the feeding points into high-temperature zones (HTZs) and raw mill (RM). Cement quality and major cement kiln emission characteristics were comprehensively investigated. The results showed that in terms of burnability, compressive strength and microstructure, the optimum co-processing amount of LDS were 9 wt% when feeding at RM, while 6% when feeding at HTZs. Meanwhile, the organic emissions of RM samples were mainly low environmental risk compounds of amides and nitrogenous heterocyclic compounds. Inorganic gaseous pollutions of NO X and SO 2 , respectively, were 8.11 mg/g DS and 12.89 mg/g DS, compared with 7.61 mg/g DS and 4.44 mg/g DS for HTZs. However, all the cement kiln emissions concentration were still much lower than standard requirements. Overall, RM had a bigger LDS co-processing capacity and higher, but acceptable, cement kiln emissions. Feeding LDS via RM could dispose larger amounts of sludge and provide more alternative materials for cement manufacturing.

Real time monitoring of powder blend bulk density for coupled feed-forward/feed-back control of a continuous direct compaction tablet manufacturing process.

Science.gov (United States)

Singh, Ravendra; Román-Ospino, Andrés D; Romañach, Rodolfo J; Ierapetritou, Marianthi; Ramachandran, Rohit

2015-11-10

The pharmaceutical industry is strictly regulated, where precise and accurate control of the end product quality is necessary to ensure the effectiveness of the drug products. For such control, the process and raw materials variability ideally need to be fed-forward in real time into an automatic control system so that a proactive action can be taken before it can affect the end product quality. Variations in raw material properties (e.g., particle size), feeder hopper level, amount of lubrication, milling and blending action, applied shear in different processing stages can affect the blend density significantly and thereby tablet weight, hardness and dissolution. Therefore, real time monitoring of powder bulk density variability and its incorporation into the automatic control system so that its effect can be mitigated proactively and efficiently is highly desired. However, real time monitoring of powder bulk density is still a challenging task because of different level of complexities. In this work, powder bulk density which has a significant effect on the critical quality attributes (CQA's) has been monitored in real time in a pilot-plant facility, using a NIR sensor. The sensitivity of the powder bulk density on critical process parameters (CPP's) and CQA's has been analyzed and thereby feed-forward controller has been designed. The measured signal can be used for feed-forward control so that the corrective actions on the density variations can be taken before they can influence the product quality. The coupled feed-forward/feed-back control system demonstrates improved control performance and improvements in the final product quality in the presence of process and raw material variations. Copyright © 2015 Elsevier B.V. All rights reserved.

Feeding Your Baby

Medline Plus

Full Text Available ... questions Email sign up Join our online community Home > Baby > Feeding your baby Feeding your baby E- ... We're working to radically improve the health care they receive. We're pioneering research to find ...

Feeding Your Baby

Medline Plus

Full Text Available ... for your baby Feeding your baby Family health & safety Complications & Loss Pregnancy complications Preterm labor & premature birth ... for your baby Feeding your baby Family health & safety Complications & Loss Pregnancy complications Preterm labor & premature birth ...

Feeding Your Baby

Medline Plus

Full Text Available ... fitness Prenatal care Is it safe? Labor & birth Postpartum care Baby Caring for your baby Feeding your ... fitness Prenatal care Is it safe? Labor & birth Postpartum care Baby Caring for your baby Feeding your ...

Feeding Your Baby

Medline Plus

Full Text Available ... Frequently asked questions Email sign up Join our online community March for Babies Nacersano Share Your Story ... Frequently asked questions Email sign up Join our online community Home > Baby > Feeding your baby Feeding your ...

Establishing breast feeding in hospital.

OpenAIRE

Levi, J

1988-01-01

The experience and practice of the author is described in her appointment as a breast feeding advisor to the paediatric and obstetric units at University College Hospital with special responsibility for supervising infant feeding, especially breast feeding in the maternity unit. During 1980-5 there were 13,185 mothers whose babies fed. The feeding method of 12,842 mothers was recorded on discharge from the postnatal wards and 77% were breast feeding; only 3% of these mothers gave complement f...

Parent feeding behavior and child appetite: associations depend on feeding style.

Science.gov (United States)

Carnell, Susan; Benson, Leora; Driggin, Elissa; Kolbe, Laura

2014-11-01

Eating behavior traits measured in early life predict eating behavior and weight trajectories later in development, and may be associated with certain parental feeding behaviors. Our goal was to investigate the relationship between a range of feeding behaviors, and preschoolers' appetitive traits. Four hundred thirty-nine parents of UK 3-5 year olds completed scales measuring authoritarian vs. authoritative forms of limiting (Restriction vs. Monitoring) and promoting (Pressuring vs. Prompting) intake, as well as Emotional and Instrumental Feeding. Parents also completed scales measuring child Food responsiveness and Satiety responsiveness. Child BMI z-scores were calculated based on measured heights and weights. Parental Restriction was significantly associated with greater child Food responsiveness (p authoritarian vs. authoritative), as well as the type of feeding behavior measured. © 2014 Wiley Periodicals, Inc.

Effect of Feed Melting, Temperature History, and Minor Component Addition on Spinel Crystallization in High-Level Waste Glass

Czech Academy of Sciences Publication Activity Database

Izák, Pavel; Hrma, P.; Arey, B. W.; Plaisted, T. J.

2001-01-01

Roč. 289, 1-3 (2001), s. 17-29 ISSN 0022-3093 Grant - others:DOE(US) DE/06/76RL01830 Keywords : feed melting * crystalization * high-level waste glass Subject RIV: CI - Industrial Chemistry, Chemical Engineering Impact factor: 1.363, year: 2001

Effects of feeding systems on rumen environment, degradability and passage kinetics in Ankole × Friesian crossbred steers

DEFF Research Database (Denmark)

Asizua, D.; Mpairwe, D.; Kabi, Fred

2018-01-01

Natural pastures constitute a large proportion of the feed resource base for meat and milk production in Sub-Saharan Africa. However, there is increasing use of agro-industrial by-products, especially those that are cereal-based as supplementary feedstuff to grazing animals and in diets under semi...

Mothers who formula feed: their practices, support needs and factors influencing their Infant feeding decision

LENUS (Irish Health Repository)

Tarrant, R C

2013-01-01

The majority of mothers in Ireland provide formula milk to their infants during the initial weeks postpartum; however, data are lacking on their formula feeding practices and support needs. This prospective Dublin-based observational study, which included 450 eligible mother-term infant pairs recruited and followed up to 6 months postpartum, aimed to advance our understanding of maternal formula feeding practices, their reasons for deciding to formula feed, sources of feeding information and perceived support needs; insights into infant formula milk consumption patterns in relation to current feeding guidelines are also provided. In summary, the vast majority of infants at 6 weeks were provided with formula milk (n = 368; 81.8%). Positive maternal perceptions of formula feeding were among the most frequently reported reasons underlying mothers’ decision to formula feed (e.g. convenience, 17.3%). Potential public health concerns over the large formula milk volumes consumed by infants (mean 205ml\\/kilogram\\/day) relative to infant feeding guidelines (150ml\\/kilogram\\/day) were raised from this study. Some mothers continue to add solid foods to infant bottle feeds at 6 weeks (3.8%) and 6 months (6%), a non-recommended feeding practice posing a choking risk for infants. Crucially, this study highlights the need to provide greater support and information to mothers who decide to formula feed postpartum including practical information on sterilisation and formula reconstitution. While breastfeeding promotion and research continues to be a public health priority in Ireland, addressing the support and information needs of mothers who formula feed, an underrepresented and understudied population in the literature, also needs to be considered to ensure optimal health and safety for their infants.

Engineering of Yersinia Phytases to Improve Pepsin and Trypsin Resistance and Thermostability and Application Potential in the Food and Feed Industry.

Science.gov (United States)

Niu, Canfang; Yang, Peilong; Luo, Huiying; Huang, Huoqing; Wang, Yaru; Yao, Bin

2017-08-30

Susceptibility to proteases usually limits the application of phytase. We sought to improve the pepsin and trypsin resistance of YeAPPA from Yersinia enterocolitica and YkAPPA from Y. kristensenii by optimizing amino acid polarity and charge. The predicted pepsin/trypsin cleavage sites F89/K226 in pepsin/trypsin-sensitive YeAPPA and the corresponding sites (F89/E226) in pepsin-sensitive but trypsin-resistant YkAPPA were substituted with S and H, respectively. Six variants were produced in Pichia pastoris for catalytic and biochemical characterization. F89S, E226H, and F89S/E226H elevated pepsin resistance and thermostability and K226H and F89S/K226H improved pepsin and trypsin resistance and stability at 60 °C and low pH. All the variants increased the ability of the proteins to hydrolyze phytate in corn meal by 2.6-14.9-fold in the presence of pepsin at 37 °C and low pH. This study developed a genetic manipulation strategy specific for pepsin/trypsin-sensitive phytases that can improve enzyme tolerance against proteases and heat and benefit the food and feed industry in a cost-effective way.

Effect of feeding frequency and feeding rate on growth performance ...

African Journals Online (AJOL)

Fish fed at higher feeding rates accumulated significantly more lipid within the body and had associated decreases in moisture, protein, and ash content, but carcass composition was unaffected by feeding frequency. Juvenile pompano show better growth performance when fed 10% BW/day 3 and 6 times a day.

Advancement in the Feeding and Nutrition of Farm Animals of Bangladesh and a Panoramic View 2050

Directory of Open Access Journals (Sweden)

Khan Shahidul Huque

2018-03-01

Full Text Available This article describes genesis and the advances of schooling, research and extension of animal nutrition science and practices in Bangladesh. It portrays sine qua non of the advancement of animal nutrition, fodder production and frontier knowledge of allied disciplines. Domestic growth of good practices and its global and regional competitive advantages are delineated for supporting the growing need of safe animal sourced food pillared with profit, people, planet and the ethics of sustainable production of farm animals. A vision of becoming world middle income country with a national population plateau of around 202.0 million and demographic shifts by 2050 may require the annual production of 130.0 and 27.0 thousand tons of manufactured dairy and beef feed furthering global trading competitions for feed ingredients. This competition may be minimized through the production and supply of domestic sourced unique quality feeds and value additions to roughages. Capacity enhancement in research, education and extension will boost socioeconomic and the production efficiency of farm animals and enhance sustainable growth of feed industry racing with regional and global competitions.

Effect of produced water on feeding and metabolism of Atlantic cod (Gadus morhua)

Energy Technology Data Exchange (ETDEWEB)

Volkoff, H.; Parrish, C. [Memorial Univ. of Newfoundland, St. John' s, NL (Canada); Hamoutene, D.; Mabrouk, G.; Samuelson, S.; Mansour, A.; Lee, K. [Fisheries and Oceans Canada, Dartmouth, NS (Canada). Maritimes Region, Ocean Sciences Division

2007-07-01

This paper addressed concerns regarding potentially detrimental cumulative effects of waste products from oil industry activities on marine organisms around production sites. The metabolic capacities, feeding and digestive physiology of fish have been shown to change with environmental parameters, which could impact the growth and health status of fish populations. In this study, the effects of produced water (PW) on feeding and metabolism of Atlantic cod was investigated by exposing fish to 0.100 ppm (x 10,000 PW dilution) or 200 ppm (x 500 dilution) of PW for 76 days. Throughout the experiment, food intake and mean weight were monitored. In addition, serum lipids, metabolites and gene expression of a brain appetite regulating factor were measured at the end of the experiment. No significant differences were observed in weight gain or food intake between the 3 groups of fish. Serum metabolites and neuropeptide Y expression remained unchanged between groups. The study is ongoing to complete comparative measurements of whole blood fatty acid profiles in plasma. The preliminary results indicate that feeding and metabolism in cod is not affected by produced water.

New electron beam facility for R&D and production at acsion industries

Science.gov (United States)

Lopata, V. J.; Barnard, J. W.; Saunders, C. B.; Stepanik, T. M.

2003-08-01

Since its incorporation in 1998, Acsion Industries Inc. has been working with clients to develop industrial uses of electron processing for improving products and manufacturing processes. Acsion has promoted this technology for sterilizing medical devices and pharmaceuticals, for treating wood pulp in the viscose/rayon process, for reducing pathogens in food and animal feed, and for curing advanced composites for the aerospace industry. As a result of significant developments in its composite curing programs, Acsion has recently made major modifications to its facility to increase its production and R&D capabilities. These modifications are described in this paper.

Aflatoxin B1, zearalenone and deoxynivalenol in feed ingredients and complete feed from different Province in China

Directory of Open Access Journals (Sweden)

Li Wu

2016-10-01

Full Text Available Abstract Background The current study was carried out to provide a reference for monitory of aflatoxin B1 (AFB1, zearalenone (ZEN and deoxynivalenol (DON contamination in feed ingredients and complete feeds were collected from different Province in China from 2013 to 2015. Methods A total of 443 feed ingredients, including 220 corn, 24 wheat, 24 domestic distillers dried grains with soluble (DDGS, 55 bran, 20 wheat shorts and red dog, 37 imported DDGS, 34 corn germ meal and 29 soybean meal as well as 127 complete feeds including 25 pig complete feed (powder, 90 pig complete feed (pellet, six duck complete feed and six cattle complete feed were randomly collected from different Province in China, respectively, by high-performance chromatography in combined with UV or fluorescence analysis. Results The incidence rates of AFB1, ZEN and DON contamination of feed ingredients and complete feeds were 80.8, 92.3 and 93.9 %, respectively. The percentage of positive samples for DON ranged from 66.7 to 100 %. Domestic DDGS and imported DDGS presented the most serious contamination AFB1, ZEN and DON contamination levels of feeds ranged from 61.5 to 100 %, indicated that serious contamination over the studied 3-year period. Conclusion The current data provide clear evidence that AFB1, ZEN and DON contamination of feed ingredients and complete feeds in different Province in China is serious and differs over past 3-year. The use of corn, domestic DDGS, imported DDGS and corn germ meal, which may be contaminated with these three mycotoxins, as animal feed may triggered a health risk for animal. Feeds are most contaminated with DON followed by ZEN and AFB1. Mycotoxins contamination in feed ingredients and complete feeds should be monitored routinely in China.

First feeding of larval herring

DEFF Research Database (Denmark)

Kiørboe, Thomas; Munk, Peter; Støttrup, Josianne

1985-01-01

The transition period from endogenous to exogenous feeding by larval herring was investigated in the laboratory for four herring stocks in order to evaluate the chances of survival at the time of fiest feeding. Observations on larval activity, feeding and growth were related to amount of yolk......, visual experience with potential prey organisms prior to first feeding and prey density. Herring larvae did not initiate exogenous feeding until around the time of yolk resorption. The timing of first feeding was not influenced by prior exposure to potential prey organisms during the yolk sac stage....... In the light of these observations, the ecological significance of the yolk sac stage is discussed. Initiation of exogenous feeding was delayed by 1-4 days at a low (7.5 nauplii .cntdot. l-1) compared to a high (120 nauplii .cntdot. l-1) prey density, but even at prey densities corresponding to the lower end...

Effect of feeding silkworm on growth performance and feed efficiency of snakehead (Channa striata)

Science.gov (United States)

Firmani, U.; Lono

2018-04-01

The snakehead, Chana striata is a carnivorous freshwater fish and widely distributed in Asia. High demand of this fish has been triggering many aquaculturist to culture C. stiata. Feed was the important factor for fish growth. Silkworm has high protein content, low fat and can be used as natural feed for finfish. This study investigate the silkworm feed in C. striata. The treatment of this research were A (100 % pellet); B (100 % silkworm); C (combination of 75 % pellet and 25 % silkworm); D (combination of 50 % pellet and 50 % silkworm); and E (combination of 25 % pellet and 75 % silkworm). The variables measured in this study were relatif growth, specific growth rate, feed efficiency, feed conversion ratio, and survival rate. The result show that silkworm gave the high growth performance, feed efficiency and survival rate of the snakehead (Channa striata) compared with the control.

The development of a new breast feeding assessment tool and the relationship with breast feeding self-efficacy.

Science.gov (United States)

Ingram, Jenny; Johnson, Debbie; Copeland, Marion; Churchill, Cathy; Taylor, Hazel

2015-01-01

to develop a breast feeding assessment tool to facilitate improved targeting of optimum positioning and attachment advice and to describe the changes seen following the release of a tongue-tie. development and validation of the Bristol Breastfeeding Assessment Tool (BBAT) and correlation with breast feeding self-efficacy. maternity hospital in South West England. 218 breast feeds (160 mother-infant dyads); seven midwife assessors. the tool has more explanation than other tools to remind those supporting breast-feeding women about the components of an efficient breast feed. There was good internal reliability for the final 4-item BBAT (Cronbach's alpha=0.668) and the midwives who used it showed a high correlation in the consistency of its use (ICC=0.782). Midwives were able to score a breast feed consistently using the BBAT and felt that it helped them with advice to mothers about improving positioning and attachment to make breast feeding less painful, particularly with a tongue-tied infant. The tool showed strong correlation with breast feeding self-efficacy, indicating that more efficient breast feeding technique is associated with increased confidence in breast feeding an infant. the BBAT is a concise breast feeding assessment tool facilitating accurate, rapid breast feeding appraisal, and targeting breast feeding advice to mothers acquiring early breast feeding skills or for those experiencing problems with an older infant. Accurate assessment is essential to ensure enhanced breast feeding efficiency and increased maternal self-confidence. the BBAT could be used both clinically and in research to target advice to improve breast feeding efficacy. Further research is needed to establish its wider usefulness. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

[Feeding disorders in infancy: feeding interaction concept in diagnosis and treatment].

Science.gov (United States)

Keren, M; Tyano, S

1998-09-01

In infancy clinical manifestations of psychological distress are mainly somatic. Feeding disorders are one of the most common and nonspecific manifestations of different kinds of disturbed parent-child relationships. These disturbances may have their origins in the baby's constitution and physical status, in the parent's personality structure, or both, as has been conceptualized in the transactional model of normal and abnormal development. Among the daily interactions a baby has with parents, feeding has special inherent impact on the early parent-child relationship because of its psychological meanings. Therefore, feeding disorders, with or without failure to thrive, often reflect various disorders of infancy, still not well recognized in the medical community, such as regulatory disorders, attachment disorders, depression of infancy, disorders of separation-individuation, and post-traumatic eating disorder. 3 clinical cases are brought to increase awareness of psychological distress in the infant, and of feeding disorders as 1 of its manifestations. Each illustrates a different kind of feeding disorder in terms of etiology and pathogenesis. Through these cases we emphasize the need for a multi-disciplinary, integrative approach in diagnosis and treatment. Our conceptual background is based both on the transactional model of development (infant and parental factors impact on each other) in a very dynamic paradigm, and on psychodynamic premises. Intrapsychic conflicts and past representations impact heavily on the parenting characteristics. We emphasize the psychological significance of disturbed feeding interactions, with or without failure to thrive.

Feed Technology of Fibrous Sugarcane Residues for Ruminants

Directory of Open Access Journals (Sweden)

Kuswandi

2007-06-01

Full Text Available Abundant sugarcane residue during shortage of roughage in dry season gives an opportunity to raise ruminants around sugarcane industries. However, these products are not widely used by farmers due to an assumption that the usage is inefficient and that the feed utilization technology is not widely recognized. Sugarcane fibrous residues (tops, bagasse and pith may be a potential feed component if pre-treated to increase its digestion and consumption by the animal, and/or supplemented by other ingredients to balance nutrients in the rumen as well as those for production purpose. Digestibility can be increased by chemical treatments such as ammoniation and other alkaline treatments, whereas consumption can be increased by physical treatments such as grinding, hammermilling or pelleting. Nutrients that are missing in these fibrous residues can be provided by addition of urea, molasses and minerals for maintenance need, and bypass nutrients (carbohydrates, protein and fats that are digested in the small intestine and available for tissue or milk synthesis. There are three options for development of livestock agribusiness based on fibrous sugarcane residues; however, these require several technologies to optimize the utilization of these residues.

Feed delivery method affects the learning of feeding and competitive behavior in dairy heifers.

Science.gov (United States)

Greter, A M; Leslie, K E; Mason, G J; McBride, B W; DeVries, T J

2010-08-01

The objective of this study was to determine how different feeding methods may affect the learning of feeding, sorting, and competitive behavior of growing dairy heifers. We hypothesized that heifers previously fed a total mixed ration (TMR) would distribute their feeding time more evenly throughout the day, sort the new ration less, compete less for feed, maintain a more solid fecal consistency, and continue to grow rapidly compared with heifers previously fed a top-dressed ration (TDR). Thirty-two Holstein heifers (237.2+/-21.9 d of age) were divided into 8 groups of 4 and exposed to 1 of 2 treatments for 13 wk: 1) TMR or 2) TDR, with each containing 65% grass/alfalfa haylage and 35% textured concentrate on a dry matter (DM) basis. Following this feeding period, all heifers were switched to an unfamiliar TMR containing 56.1% grass/alfalfa haylage, 21.0% corn silage, 21.0% high-moisture corn, and 1.9% mineral supplement (DM basis) for 7 wk. Group DM intakes were recorded daily throughout the experiment. Feeding behavior, recorded using time-lapse video, and sorting behavior were measured for 7 d during wk 1, 4, and 7 after the dietary change. Feeding competition was measured on d 2, 4, and 6 of each recording week. Sorting activity was determined through particle size analysis of the fresh feed and orts. The particle size separator separated feed into 4 fractions (long, medium, short, and fine). Sorting of each fraction was calculated as actual intake expressed as a percentage of predicted intake. Animals were scored for fecal consistency twice weekly, using a scale from 1 (liquid) to 4 (solid). Heifers were weighed every 2 wk. Neither DM intake (9.0 kg/d) nor average daily gain (1.2 kg/d) differed between treatments. Sorting also did not differ between treatments. Heifers tended to spend more time feeding if they had previously been fed a TDR (198.8 vs. 186.8 min/d). As they had done before the dietary change, heifers previously fed the TDR spent more time at the

Breast-Feeding Twins: Making Feedings Manageable

Science.gov (United States)

... Department of Health and Human Services Office on Women's Health. http://www.womenshealth.gov/publications/our-publications/breastfeeding-guide. Accessed March 11, 2015. Shelov SP, et al. Feeding your ...

Ad libitum or demand/semi-demand feeding versus scheduled interval feeding for preterm infants.

Science.gov (United States)

McCormick, Felicia M; Tosh, Karen; McGuire, William

2010-02-17

Scheduled interval feeding of prescribed enteral volumes is current standard practice for preterm infants. However, feeding preterm infants in response to their hunger and satiation cues (ad libitum or demand/semi demand) rather than at scheduled intervals might help in the establishment of independent oral feeding, increase nutrient intake and growth rates, and allow earlier hospital discharge. To assess the effect of a policy of feeding preterm infants on an ad libitum or demand/semi-demand basis versus feeding prescribed volumes at scheduled intervals on growth rates and the time to hospital discharge. We used the standard search strategy of the Cochrane Neonatal Review Group. This included searches of the Cochrane Central Register of Controlled Trials (CENTRAL, The Cochrane Library, Issue 4, 2009), MEDLINE (1966 to Oct 2009), EMBASE (1980 to Oct 2009), CINAHL (1982 to Oct 2009), conference proceedings, and previous reviews. Randomised or quasi-randomised controlled trials (including cluster randomised trials) that compared a policy of feeding preterm infants on an ad libitum or demand/semi-demand basis versus feeding at scheduled intervals. We used the standard methods of the Cochrane Neonatal Review Group with separate evaluation of trial quality and data extraction by two review authors. We found eight randomised controlled trials that compared ad libitum or demand/semi-demand regimens with scheduled interval regimes in preterm infants in the transition phase from intragastric tube to oral feeding. The trials were generally small and of variable methodological quality. The duration of the intervention and the duration of data collection and follow-up in most of the trials was not likely to have allowed detection of measurable effects on growth. Three trials reported that feeding preterm infants using an ad libitum or demand/semi-demand feeding regimen allowed earlier discharge from hospital (by about two to four days) but other trials did not confirm this

Study on mycoflora of poultry feed ingredients and finished feed in Iran

OpenAIRE

Seyed Soheil Ghaemmaghami; Mehrdad Modirsaneii; Alireza Khosravi; Mehdi Razzaghi-Abyaneh

2016-01-01

 Background and Objectives: Unhygienic poultry feedstuffs can lead to nutrient losses and detrimental effect on poultry production and public health. In the present study, mycobiota and colony-forming units per gram in ingredients and finish poultry feed was evaluated with special reference to potentially mycotoxigenic fungi.Materials and Methods: Eighty five samples of corn, soybean meal and poultry finished feed were collected from nine poultry feed factories located in three provinces i.e....

Feeding Your Baby

Medline Plus

Full Text Available ... In This Topic Breastfeeding help Breastfeeding is best Food allergies and baby Formula feeding How to breastfeed Keeping breast milk safe and healthy Problems and discomforts when breastfeeding Starting your baby on solid foods Using a breast pump Baby Feeding your baby ...

EARLY ENTERAL FEEDING AND DELAYED ENTERAL FEEDING- A COMPARATIVE STUDY

Directory of Open Access Journals (Sweden)

Alli Muthiah

2017-03-01

Full Text Available BACKGROUND Nutrients form the fuel for the body, which comes in the form of carbohydrates, proteins and lipids. The body is intended to burn fuels in order to perform work. Starvation with malnutrition affects the postoperative patients and patients with acute pancreatitis. There is an increased risk of nosocomial infections and a delay in the wound healing may be noted. They are more prone for respiratory tract infections. Enteral Nutrition (EN delivers nutrition to the body through gastrointestinal tract. This also includes the oral feeding. This study will review the administration, rationale and assess the pros and cons associated with the early initiation of enteral feeding. The aim of this study is to evaluate if early commencement of enteral nutrition compared to traditional management (delayed enteral feeding is associated with fewer complications and improved outcome-  In patients undergoing elective/emergency gastrointestinal surgery.  In patients with acute pancreatitis. It is also used to determine whether a period of starvation (nil by mouth after gastrointestinal surgery or in the early days of acute pancreatitis is beneficial in terms of specific outcomes. MATERIALS AND METHODS A prospective cohort interventional study was conducted using 100 patients from July 2012 to November 2012. Patients satisfying the inclusion and exclusion criteria were included in the study. Patients admitted in my unit for GIT surgeries or acute pancreatitis constituted the test group, while patients admitted in other units for similar disease processes constituted the control group. RESULTS Our study concluded that early enteral feeding resulted in reduced incidence of surgical site infections. When the decreased length of stay, shorter convalescent period and the lesser post-interventional fatigue were taken into account, early enteral feeding has a definite cost benefit.CONCLUSION Early enteral feeding was beneficial associated with fewer

Radiation technology and feed production

International Nuclear Information System (INIS)

Ershov, B.G.

1986-01-01

The use of radiation technology to prepare feeds and feed additions for cattle of non-feed vegetable blends is considered.Physicochemical foundations of radiation-chemical processes, possibilities of the use of various radiation devices are given. Data on practical realization of the technology are presented and prospects of its introduction to solve the tasks put forward by the USSR program on feed production are analyzed

Effects of healthcare professional delivered early feeding interventions on feeding practices and dietary intake: A systematic review.

Science.gov (United States)

Matvienko-Sikar, Karen; Toomey, Elaine; Delaney, Lisa; Harrington, Janas; Byrne, Molly; Kearney, Patricia M

2018-04-01

Childhood obesity is a global public health challenge. Parental feeding practices, such as responsive feeding, are implicated in the etiology of childhood obesity. This systematic review aimed to examine of effects of healthcare professional-delivered early feeding interventions, on parental feeding practices, dietary intake, and weight outcomes for children up to 2 years. The role of responsive feeding interventions was also specifically examined. Databases searched included: CINAHL, the Cochrane Library, EMBASE, Medline, PubMed, PsycINFO, and Maternity and Infant Care. participants are parents of children ≤2 years; intervention includes focus on early child feeding to prevent overweight and obesity; intervention delivered by healthcare professionals. Sixteen papers, representing 10 trials, met inclusion criteria for review. Six interventions included responsive feeding components. Interventions demonstrated inconsistent effects on feeding practices, dietary intake, and weight outcomes. Findings suggest some reductions in pressure to eat and infant consumption of non-core beverages. Responsive feeding based interventions demonstrate greater improvements in feeding approaches, and weight outcomes. The findings of this review highlight the importance of incorporating responsive feeding in healthcare professional delivered early feeding interventions to prevent childhood obesity. Observed inconsistencies across trials may be explained by methodological limitations. Copyright © 2017 Elsevier Ltd. All rights reserved.

Application of ''Confirm tank T is an appropriate feed source for Low-Activity waste feed batch X'' to specific feed batches

International Nuclear Information System (INIS)

JO, J.

1999-01-01

This document addresses the characterization needs of tanks as set forth in the ''Confirm Tank T is an Appropriate Feed Source for Low-Activity Waste Feed Batch X'' Data Quality Objective (DQO) (Certa and Jo 1998). The primary purpose of this document is to collect existing data and identify the data needed to determine whether or not the feed source(s) are appropriate for a specific batch before transfer is made to the feed staging tanks. To answer these questions, the existing tank data must be collected and a detailed review performed. If the existing data are insufficient to complete a full comparison, additional data must be obtained from the feed source(s). Additional information requirements need to be identified and formally documented, then the source tank waste must be sampled or resampled and analyzed. Once the additional data are obtained, the data shall be incorporated into the existing database for the source tank and a reevaluation of the data against the DQO must be made

Industrial symbiosis: corn ethanol fermentation, hydrothermal carbonization, and anaerobic digestion.

Science.gov (United States)

Wood, Brandon M; Jader, Lindsey R; Schendel, Frederick J; Hahn, Nicholas J; Valentas, Kenneth J; McNamara, Patrick J; Novak, Paige M; Heilmann, Steven M

2013-10-01

The production of dry-grind corn ethanol results in the generation of intermediate products, thin and whole stillage, which require energy-intensive downstream processing for conversion into commercial animal feed products. Hydrothermal carbonization of thin and whole stillage coupled with anaerobic digestion was investigated as alternative processing methods that could benefit the industry. By substantially eliminating evaporation of water, reductions in downstream energy consumption from 65% to 73% were achieved while generating hydrochar, fatty acids, treated process water, and biogas co-products providing new opportunities for the industry. Processing whole stillage in this manner produced the four co-products, eliminated centrifugation and evaporation, and substantially reduced drying. With thin stillage, all four co-products were again produced, as well as a high quality animal feed. Anaerobic digestion of the aqueous product stream from the hydrothermal carbonization of thin stillage reduced chemical oxygen demand (COD) by more than 90% and converted 83% of the initial COD to methane. Internal use of this biogas could entirely fuel the HTC process and reduce overall natural gas usage. Copyright © 2013 Wiley Periodicals, Inc.

Marketing breastfeeding--reversing corporate influence on infant feeding practices.

Science.gov (United States)

Kaplan, Deborah L; Graff, Kristina M

2008-07-01

Breast milk is the gold standard for infant nutrition and the only necessary food for the first 6 months of an infant's life. Infant formula is deficient and inferior to breast milk in meeting infants' nutritional needs. The infant formula industry has contributed to low rates of breastfeeding through various methods of marketing and advertising infant formula. Today, in New York City, although the majority of mothers initiate breastfeeding (approximately 85%), a minority of infants is breastfed exclusively at 8 weeks postpartum (approximately 25%). The article reviews the practices of the formula industry and the impact of these practices. It then presents the strategic approach taken by the NYC Department of Health and Mental Hygiene and its partners to change hospital practices and educate health care providers and the public on the benefits of breast milk, and provides lessons learned from these efforts to make breastfeeding the normative and usual method of infant feeding in New York City.

Present Global Situation of Amino Acids in Industry.

Science.gov (United States)

Tonouchi, Naoto; Ito, Hisao

At present, amino acids are widely produced and utilized industrially. Initially, monosodium glutamate (MSG) was produced by extraction from a gluten hydrolysate. The amino acid industry started using the residual of the lysate. The discovery of the functions of amino acids has led to the expansion of their field of use. In addition to seasoning and other food use, amino acids are used in many fields such as animal nutrients, pharmaceuticals, and cosmetics. On the other hand, the invention of the glutamate fermentation process, followed by the development of fermentation methods for many other amino acids, is no less important. The supply of these amino acids at a low price is very essential for their industrial use. Most amino acids are now produced by fermentation. The consumption of many amino acids such as MSG or feed-use amino acids is still rapidly increasing.

Infectious waste feed system

Science.gov (United States)

Coulthard, E. James

1994-01-01

An infectious waste feed system for comminuting infectious waste and feeding the comminuted waste to a combustor automatically without the need for human intervention. The system includes a receptacle for accepting waste materials. Preferably, the receptacle includes a first and second compartment and a means for sealing the first and second compartments from the atmosphere. A shredder is disposed to comminute waste materials accepted in the receptacle to a predetermined size. A trough is disposed to receive the comminuted waste materials from the shredder. A feeding means is disposed within the trough and is movable in a first and second direction for feeding the comminuted waste materials to a combustor.

Maternal Feeding Practices among Children with Feeding Difficulties—Cross-sectional Study in a Brazilian Reference Center

Directory of Open Access Journals (Sweden)

Rachel H. V. Machado

2018-01-01

Full Text Available BackgroundGiven the positive influence of responsive caregiving on dietary habits in childhood, to raise awareness of caregivers regarding their behavior is crucial in multidisciplinary care on infant feeding.ObjectivesTo identify the most common responsive and non-responsive feeding practices in mothers of children with feeding complaints, as well as to seek associations between practices and caregivers’ profile.MethodsCross-sectional study with 77 children under 18 years old, with complaints of feeding difficulties. Data were collected during interviews with mothers: child age, gender, duration of exclusive breastfeeding, presence of organic disease, dynamics of bottle use, self-feeding practices and posture at meals, use of appropriate feeding equipment; basic information about the mothers (parity and level of education, caregiver feeding style, presence of coercive feeding, frequency and characteristics of family meals. Statistical analysis considered significance level at 5%.ResultsThe non-responsive profile predominated among mothers (76.2%, with the Authoritarian style being the most prevalent—39.7%. The responsive profile was characterized by absence of coercive feeding, stimulation of self-feeding practices, use of appropriate feeding equipment and meal environment, with interaction at meals. Non-responsive profile consisted of both inadequate environment and posture at meals, use of distraction and coercive feeding, lack of shared meals, and disregard for children’s hunger signals. Only the habit of sharing meals with children was associated with mothers’ profile, and considered a protection factor against non-responsive care (OR 0.23; 95% CI 0.06–0.88. Both Authoritarian (p = 0.000 and indulgent mothers (p = 0.007 breastfed exclusively for longer time than negligent ones. There was a higher level of interaction with children in “responsive” parental style (OR 0.056; p = 0.01 compared to other feeding styles

Maternal Feeding Practices among Children with Feeding Difficulties-Cross-sectional Study in a Brazilian Reference Center.

Science.gov (United States)

Machado, Rachel H V; Tosatti, Abykeyla M; Malzyner, Gabriela; Maximino, Priscilla; Ramos, Cláudia C; Bozzini, Ana Beatriz; Ribeiro, Letícia; Fisberg, Mauro

2017-01-01

Given the positive influence of responsive caregiving on dietary habits in childhood, to raise awareness of caregivers regarding their behavior is crucial in multidisciplinary care on infant feeding. To identify the most common responsive and non-responsive feeding practices in mothers of children with feeding complaints, as well as to seek associations between practices and caregivers' profile. Cross-sectional study with 77 children under 18 years old, with complaints of feeding difficulties. Data were collected during interviews with mothers: child age, gender, duration of exclusive breastfeeding, presence of organic disease, dynamics of bottle use, self-feeding practices and posture at meals, use of appropriate feeding equipment; basic information about the mothers (parity and level of education), caregiver feeding style, presence of coercive feeding, frequency and characteristics of family meals. Statistical analysis considered significance level at 5%. The non-responsive profile predominated among mothers (76.2%, with the Authoritarian style being the most prevalent-39.7%). The responsive profile was characterized by absence of coercive feeding, stimulation of self-feeding practices, use of appropriate feeding equipment and meal environment, with interaction at meals. Non-responsive profile consisted of both inadequate environment and posture at meals, use of distraction and coercive feeding, lack of shared meals, and disregard for children's hunger signals. Only the habit of sharing meals with children was associated with mothers' profile, and considered a protection factor against non-responsive care (OR 0.23; 95% CI 0.06-0.88). Both Authoritarian ( p  = 0.000) and indulgent mothers ( p  = 0.007) breastfed exclusively for longer time than negligent ones. There was a higher level of interaction with children in "responsive" parental style (OR 0.056; p  = 0.01) compared to other feeding styles. Results highlight the need for educational

Feeding Your Baby

Medline Plus

Full Text Available ... baby formula , find out how to choose the best one for your baby and how to make bottle-feeding safe. And then get ready for solid foods ! In This Topic Breastfeeding help Breastfeeding is best Food allergies and baby Formula feeding How to ...

Determining appropriate feed-in tariff rates to promote biomass-to-electricity generation in Eastern Ontario, Canada

International Nuclear Information System (INIS)

Moore, Steven; Durant, Vincent; Mabee, Warren E.

2013-01-01

On-site data collection, interviews, and financial models were used to determine the feed-in tariff (FIT) rate required to encourage investment in the generation of electricity from currently unused biomass from the Eastern Ontario forest industry. A financial model was adapted and run to determine the net present value, internal rate of return, and payback period associated with a 15 MW biomass-to-electricity facility. The analysis suggests that Ontario should consider a stronger incentive than the recently-offered CDN$ 0.13 kW −1 h −1 for biomass-to-electricity. If no customer for heat generated from the plant can be found, FIT rates between CDN$ 0.17–0.22 kW −1 h −1 are necessary to achieve a 15% internal rate of return and a simple payback of approximately 5 yr; achieving a price of CDN$ 0.013 kW −1 of thermal output still requires elevated FIT rates between CDN$ 0.15–0.21 kW −1 h −1 to meet economic performance criteria. Other barriers, particularly regulations regarding the use of operating engineers in steam plants, should also be addressed to facilitate development of biomass-to-electricity. Without these changes, it is likely that biomass will be significantly under-used and will not contribute to the renewable energy goals of Ontario. - Highlights: • Economic performance of biomass-to-electricity generation in Ontario is assessed. • Feed-in tariffs needed to meet industrial payback and IRR targets are determined. • Existing feed-in tariff rates for biomass must be raised to meet industrial targets. • Incentives that adjust feedstock price might be explored to increase biomass use

Recommended feeding regime and light climate in live feed cultures of the calanoid copepod Acartia tonsa Dana

DEFF Research Database (Denmark)

Jepsen, Per Meyer; Steensbjerg Bjørbæk, Niels; Rayner, Thomas Allan

2017-01-01

(spiked feeding), in four equal pulses (pulsed feeding), and evenly over 24 h (continuous feeding). The feeding regimes were investigated at low food levels (~200 µg C L−1) and at full-saturated food levels (~1800 µg C L−1). As photoperiod may have an effect on feeding uptake and productivity, the present...

Maize production in mid hills of Nepal: from food to feed security

OpenAIRE

Krishna Prasad Timsina; Yuga Nath Ghimire; Jeevan Lamichhane

2016-01-01

This study was undertaken in 2016 to analyze the production and utilization of maize in Nepal. Sixty maize growers from Kavre and Lamjung districts were selected using purposive, cluster and simple random sampling techniques. Similarly, six feed industries and five maize experts from Chitwan district were also interviewed. Study shows 56% of the total areas were used for maize production and 50% of the maize areas were covered by hybrid maize. There was no practice of contract maize productio...

Exometabolomic Analysis of Cross-Feeding Metabolites.

Science.gov (United States)

Lubbe, Andrea; Bowen, Benjamin P; Northen, Trent

2017-10-04

Microbial consortia have the potential to perform complex, industrially important tasks. The design of microbial consortia requires knowledge of the substrate preferences and metabolic outputs of each member, to allow understanding of potential interactions such as competition and beneficial metabolic exchange. Here, we used exometabolite profiling to follow the resource processing by a microbial co-culture of two biotechnologically relevant microbes, the bacterial cellulose degrader Cellulomonas fimi, and the oleaginous yeast Yarrowia lipolytica. We characterized the substrate preferences of the two strains on compounds typically found in lignocellulose hydrolysates. This allowed prediction that specific sugars resulting from hemicellulose polysaccharide degradation by C. fimi may serve as a cross-feeding metabolites to Y. lipolytica in co-culture. We also showed that products of ionic liquid-treated switchgrass lignocellulose degradation by C. fimi were channeled to Y. lipolytica in a co-culture. Additionally, we observed metabolites, such as shikimic acid accumulating in the co-culture supernatants, suggesting the potential for producing interesting co-products. Insights gained from characterizing the exometabolite profiles of individual and co-cultures of the two strains can help to refine this interaction, and guide strategies for making this an industrially viable co-culture to produce valuable products from lignocellulose material.

Carry-over of veterinary drugs from medicated to non-medicated feeds in commercial feed manufacturing plants

NARCIS (Netherlands)

Stolker, A.A.M.; Zuidema, T.; Egmond, van H.J.; Deckers, E.R.; Herbes, R.; Hooglught, J.; Olde Heuvel, E.; Jong, de J.

2013-01-01

Different compound feeds have to be manufactured in the same production line. As a consequence, traces of the first produced feed may remain in the production and get mixed with the next feed batches. This "carry-over" is unavoidable, and so non-medicated feed can be contaminated with veterinary

Insights on the host stress, fear and growth responses to the deoxynivalenol feed contaminant in broiler chickens.

Science.gov (United States)

Ghareeb, Khaled; Awad, Wageha A; Sid-Ahmed, Omer E; Böhm, Josef

2014-01-01

Mycotoxins pose an important danger to human and animal health. Poultry feeds are frequently contaminated with deoxynivalenol (DON) mycotoxin. It is thus of great importance to evaluate the effects of DON on the welfare related parameters in poultry industry. In the present study, the effects of contamination of broiler diet with 10 mg DON/kg feed on plasma corticosterone and heterophil to lymphocyte (H/L) ratio as indicators of stress, tonic immobility duration as an index for fear response and growth performance of broiler chickens were studied. In addition, the effect of a microbial feed additive either alone or in combination with DON contamination on these different aspects was also evaluated. The results showed that DON feeding significantly affected the welfare related parameters of broiler chickens. The feeding of DON contaminated diet resulted in an elevation of plasma corticosterone, higher H/L ratio and increased the fear levels as indicated by longer duration of tonic immobility reaction. Furthermore, DON reduced the body weight and body weight gain during the starter phase definitely at the second and third week. However, during grower phase, feeding of DON decreased the body weight at the fourth week and reduced the body gain at the fifth week. Addition of the microbial feed additive, a commercial antidote for DON mycotoxin, was able to overcome DON effects on stress index (H/L ratio), fearfulness and growth parameters of broilers. In conclusion, we showed for the first time that the DON feeding increased the underlying fearfulness and physiological stress responses of broilers and resulted in a reduction in the welfare status as indicated by higher plasma corticosterone, higher H/L ratio and higher fearfulness. Additionally, feeding the microbial feed additive was effective in reducing the adverse effects of DON on the bird's welfare and can improve the performance of broiler chickens.

Insights on the host stress, fear and growth responses to the deoxynivalenol feed contaminant in broiler chickens.

Directory of Open Access Journals (Sweden)

Khaled Ghareeb

Full Text Available Mycotoxins pose an important danger to human and animal health. Poultry feeds are frequently contaminated with deoxynivalenol (DON mycotoxin. It is thus of great importance to evaluate the effects of DON on the welfare related parameters in poultry industry. In the present study, the effects of contamination of broiler diet with 10 mg DON/kg feed on plasma corticosterone and heterophil to lymphocyte (H/L ratio as indicators of stress, tonic immobility duration as an index for fear response and growth performance of broiler chickens were studied. In addition, the effect of a microbial feed additive either alone or in combination with DON contamination on these different aspects was also evaluated. The results showed that DON feeding significantly affected the welfare related parameters of broiler chickens. The feeding of DON contaminated diet resulted in an elevation of plasma corticosterone, higher H/L ratio and increased the fear levels as indicated by longer duration of tonic immobility reaction. Furthermore, DON reduced the body weight and body weight gain during the starter phase definitely at the second and third week. However, during grower phase, feeding of DON decreased the body weight at the fourth week and reduced the body gain at the fifth week. Addition of the microbial feed additive, a commercial antidote for DON mycotoxin, was able to overcome DON effects on stress index (H/L ratio, fearfulness and growth parameters of broilers. In conclusion, we showed for the first time that the DON feeding increased the underlying fearfulness and physiological stress responses of broilers and resulted in a reduction in the welfare status as indicated by higher plasma corticosterone, higher H/L ratio and higher fearfulness. Additionally, feeding the microbial feed additive was effective in reducing the adverse effects of DON on the bird's welfare and can improve the performance of broiler chickens.

Feeding Your Baby

Medline Plus

Full Text Available ... In This Topic Breastfeeding help Breastfeeding is best Food allergies and baby Formula feeding How to breastfeed Keeping a breastfeeding log Keeping breast milk safe and healthy Problems and discomforts when breastfeeding Starting your baby on solid foods Using a breast pump Baby Feeding your baby ...

Modern features of complementary feeding and their efficiency in baby-led feeding

Directory of Open Access Journals (Sweden)

K.D. Duka

2017-11-01

Full Text Available Background. Baby-led feeding exists in the practice of pediatrics since 2002. But there are still no clear results on the effectiveness of its implementation and the impact on the health of young children. Particular attention is required to study the effectiveness of introducing complementary feeding. Materials and methods. We analyzed 245 questionnaires of infants with baby-led-feeding. In the questionnaires for mothers, questions were raised about the initiation of the introduction of complementary feeding, its types, the child’s reaction, with the assessment of physical development and the previous diseases. Results. Children with baby-led-feeding have a tendency to late introduction of complementary feeding (from 6 months. It turned out that until this age, the child receives only breast milk, which can’t satisfy the need for important constituent ingredients. They are necessary for the child at this age, and it leads to various metabolic disorders in the form of allergic di­seases, metabolic syndrome, anemia, osteoporosis and others. Particular concern was caused by the fact that children start receiving meat products too late, which naturally leads to the development of iron deficiency anemia. In addition, contrary to the current norms and regulations, we noticed frequent facts of self-consumption of the whole milk itself and fermented milk products made from it (kephir, yoghurt. Conclusions. Based on the study of this question, it was proved that the existing provisions on the introduction of complementary foods with baby-led-feeding require supervision and correction in accordance with the state of children’s health and the existing provisions of the World Health Organization.

Residual feed intake as a feed efficiency selection tool and its relationship with feed intake, performance and nutrient utilization in Murrah buffalo calves.

Science.gov (United States)

Subhashchandra Bose, Bisitha Kattiparambil; Kundu, Shivlal Singh; Tho, Nguyen Thi Be; Sharma, Vijay Kumar; Sontakke, Umesh Balaji

2014-04-01

Residual feed intake (RFI) is the difference between the actual and expected feed intake of an animal based on its body weight and growth rate over a specific period. The objective of this study was to determine the RFI of buffalo calves using residuals from appropriate linear regression models involving dry matter intake (DMI), average daily gain (ADG) and mid-test metabolic body weight. Eighteen male Murrah buffalo calves of 5-7 months were selected and fed individually. A feeding trial using ad libitum feeding of total mixed ration (TMR, concentrate/roughage = 40:60) was conducted for 52 days in which the daily DMI, weekly body weight (BW) and growth rate of the calves were monitored. RFI of calves ranged from -0.20 to +0.23 kg/day. Mean DMI (in grams per kilogram of BW(0.75)) during the feeding trial period was significantly (P 0.05) between low and high RFI groups. Over the course of a trial period, low RFI group animals consumed 10% less feed compared to high RFI group of animals, yet performed in a comparable manner in terms of growth rate. Metabolizable energy for maintenance (MEm) was found to be significantly (P feed efficiency.

Radiation pasteurization of mink feed

International Nuclear Information System (INIS)

Passey, C.A.; Roy, D.; Savoie, L.; Wilson, J.

1990-01-01

No significant differences were observed in the net birth rate of mink kits/female between the 7 breeding groups. However, there was reduced incidence (P=0.05) of kit deaths among the females receiving irradiated feed, and larger kit size (P<0.0001) at birth particularly for the litter size of 5-8 kits. The second generation minks born to parents receiving feed irradiated to a planned dose of 1 kGy weighed on average about 2.5% more, and their fur was on average about 1±0.26 cm longer (12% more males making the top length grade). Moreover, there was no effect of irradiated feed on fur quality. Irradiation of mink feed with subsequent frozen storage of the meat component improved the microbiological quality by decreasing the incidence of Pseudomonas sp. and Salmonella sp. Radiation pasteurization of mink feed (frozen meat to 1 kGy, and dry feed to 2 kGy or more) should therefore help improve feed utilization, keep animals healthier, and reproducing better without affecting fur quality. (author)

Melter feed viscosity during conversion to glass: Comparison between low-activity waste and high-level waste feeds

Energy Technology Data Exchange (ETDEWEB)

Jin, Tongan [Pacific Northwest National Laboratory, Richland Washington; Chun, Jaehun [Pacific Northwest National Laboratory, Richland Washington; Dixon, Derek R. [Pacific Northwest National Laboratory, Richland Washington; Kim, Dongsang [Pacific Northwest National Laboratory, Richland Washington; Crum, Jarrod V. [Pacific Northwest National Laboratory, Richland Washington; Bonham, Charles C. [Pacific Northwest National Laboratory, Richland Washington; VanderVeer, Bradley J. [Pacific Northwest National Laboratory, Richland Washington; Rodriguez, Carmen P. [Pacific Northwest National Laboratory, Richland Washington; Weese, Brigitte L. [Pacific Northwest National Laboratory, Richland Washington; Schweiger, Michael J. [Pacific Northwest National Laboratory, Richland Washington; Kruger, Albert A. [U.S. Department of Energy, Office of River Protection, Richland Washington; Hrma, Pavel [Pacific Northwest National Laboratory, Richland Washington

2017-12-07

During nuclear waste vitrification, a melter feed (generally a slurry-like mixture of a nuclear waste and various glass forming and modifying additives) is charged into the melter where undissolved refractory constituents are suspended together with evolved gas bubbles from complex reactions. Knowledge of flow properties of various reacting melter feeds is necessary to understand their unique feed-to-glass conversion processes occurring within a floating layer of melter feed called a cold cap. The viscosity of two low-activity waste (LAW) melter feeds were studied during heating and correlated with volume fractions of undissolved solid phase and gas phase. In contrast to the high-level waste (HLW) melter feed, the effects of undissolved solid and gas phases play comparable roles and are required to represent the viscosity of LAW melter feeds. This study can help bring physical insights to feed viscosity of reacting melter feeds with different compositions and foaming behavior in nuclear waste vitrification.

A study on the effect of treatment of compound feed with ionizing radiation on feeding broiler chickens

International Nuclear Information System (INIS)

Chotinski, D.; Tsvetanov, I.; Stanchev, Kh.; Bokhorov, O.; Korudzhijski, N.; Dzhurov, A.

1987-01-01

An experiment was conducted with 600 broiler chickens divided into 4 groups, whereas chickens of the control group were offered untreated compound feed and those of the experimental groups were given preliminary treated compound feed with 0.35, 0.7 and 1.0 Mrad, respectively. General chemical analysis of the nonradiated and radiated with different doses of gamma rays feed was carried out in advance, the count of bacteria cells per gram of feed was also determined. Followed up was also the weight development of chickens and the feed to gain ratio. The morphological examinations of some organs were also perfomed. Treatment with gamma rays in doses of 0.35 to 1.0 Mrad inactivated enterobacteria, excepting Bac. subtilis. The general chemical content of feed and weight development of chickens were not markedly effected by radiation. The feed to gain ratio decreased, but with the increase in the radiation dose also rose. No histological changes of the organs were observed upon feeding preliminary irradiated compound feeds

Feeding of Total Mixed Ration on the Productivity of Friesian Holstein Cross-Grade Cattle

Science.gov (United States)

Sunarso; Christiyanto, M.; Nuswantara, L. K.

2018-02-01

An experiment was conducted to evaluate feeding of total mixed ration (TMR) on the productivity of Friesian Holstein (FH) male cross-grade cattle at Semarang Municipality. TMR was a ration formulated with agricultural and agro-industrial by-product (no grass and/or green forage were used) to fulfilled the nutrient requirement of beef cattle. Total mixed ration were formulated on iso-energy of 66% of total digestible nutrients (TDN) and different level of crude protein (CP) content of 11%, 12%, 13%, and 14%. Twenty (20) heads of FH male cross-grade cattle with initial body weight of 292.40+33.06 kg were used in this experiment, and were arranged into 5 treatments T0, T1, T2, T3, and T4), and 4 replications. Data collected were analysed statistically using analyses of variance (Anova) based on the completely randomized design (CRD), then followed by Duncan’s Multiple Range Test (DMRT) for different among treatments. Results of the experiment showed significantly different effect (P0.05) on feed conversion ratio (FCR), and feed efficiency. Others parameter showed that there were no significantly different (P>0.05) effect on the dry matter and organic matter digestibility in vitro, rumen ammonia concentration, and volatile fatty acid’s rumen concentration. It was concluded that feeding TMR was potentially prospected for fattening of beef cattle, particularly as feeding strategy when there was no grass and/or green forage anymore.

Breast Feeding And Its Significance In Infant Feeding Practices In India

Directory of Open Access Journals (Sweden)

Belavady Bhavani

1987-01-01

Full Text Available Surveys on breast-feeding practices have revealed a satisfactory situation in many parts of the country. However, adequacy in terms of quality and quantity of breast milk has not been studied much. Reports available indicate secretion of adequate amount of milk by the mother. This however should not be equated with adequacy of nutrients to this growing child. Concentrations of vitamins are low. The immunologica factors, proteins, minerals and calorie content are in the normal ranges observed in milk samples obtained from well-nourished mother. Breast-feeding should be recommended for as long as possible with adequate supplements. This will have a salubrious effect on the infant and help mothers in spacing births of children. Growth of infants fed soley on breast milk is satisfactory during the first 4 to 5 months. Proper time and type of supplements to be recommended for the community in general need to be studied. Effect of work outside the house on the mother and child, if any, has not received the attention it deserves. High priority has to be a corded to this study, in the present context of dynamic change occurring in the country in relation to the working status of women. Indian is considered a developing country and Indians are conservative by nature. Attitude of the community to infant feeding has not change much except in the educated urban elite and a small section of the poor who consider practice among the former as ideal. The concern and anxiety expressed with regard to breast-feeding by health personnel in foreign countries have not evoked the same response in our country. Reasons are many but if any single reason is to be assigned, it is the popularity of breast-feeding in a vast majority of our mothers. This article will highlight the findings of selected surveys on breast-feeding in the context of our present infant and pre-school feeding practices and refers to the quality and quantity of breast milk briefly.

21 CFR 579.40 - Ionizing radiation for the treatment of poultry feed and poultry feed ingredients.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Ionizing radiation for the treatment of poultry feed and poultry feed ingredients. 579.40 Section 579.40 Food and Drugs FOOD AND DRUG ADMINISTRATION... § 579.40 Ionizing radiation for the treatment of poultry feed and poultry feed ingredients. Ionizing...

New electron beam facility for R and D and production at acsion industries

Energy Technology Data Exchange (ETDEWEB)

Lopata, V.J.; Barnard, J.W.; Saunders, C.B.; Stepanik, T.M. E-mail: stepanik@acsion.com

2003-08-01

Since its incorporation in 1998, Acsion Industries Inc. has been working with clients to develop industrial uses of electron processing for improving products and manufacturing processes. Acsion has promoted this technology for sterilizing medical devices and pharmaceuticals, for treating wood pulp in the viscose/rayon process, for reducing pathogens in food and animal feed, and for curing advanced composites for the aerospace industry. As a result of significant developments in its composite curing programs, Acsion has recently made major modifications to its facility to increase its production and R and D capabilities. These modifications are described in this paper.

Feeding practices and potential risk factors for laminitis in dairy cows in Thailand

OpenAIRE

Pilachai, R.

2013-01-01

Laminitis is considered an important health problem facing the Thai dairy industry. Although the etiology of laminitis is multifactorial, nutrition is considered an important risk factor. Rumen acidosis, lipopolysaccharides (LPS) and histamine may play a role in the development of laminitis in dairy cattle. However, the relevancy of these risk factors in relation to the occurrence of laminitis under practical feeding conditions in Thailand is not clear. In Thailand, dairy rations are generall...

Emerging issues in complementary feeding

DEFF Research Database (Denmark)

Michaelsen, Kim F.; Grummer-Strawn, Laurence; Bégin, France

2017-01-01

the complementary feeding period is summarized. The increased availability of sugar-containing beverages and unhealthy snack foods and its negative effect on young child's diet is described. Negative effects of nonresponsive feeding and force feeding are also discussed, although few scientific studies have...

Microarray analysis of subcutaneous adipose tissue from mature cows with divergent body weight gain after feed restriction and realimentation

Science.gov (United States)

Body weight response to periods of feed restriction and realimentation is critical and relevant to the agricultural industry. The purpose of this study was to evaluate differentially expressed genes identified in subcutaneous adipose tissue collected from cows divergent in body weight (BW) gain afte...

We only talk about breast feeding: a discourse analysis of infant feeding messages in antenatal group-based education.

Science.gov (United States)

Jennifer, Fenwick; Elaine, Burns; Athena, Sheehan; Virginia, Schmied

2013-05-01

the aim of the study was to examine the dominant discourses that midwives draw on to present information on breast feeding in group-based antenatal education sessions. breast-feeding initiation rates are high among Australian women however, duration rates are low. Antenatal breast-feeding education is considered a key strategy in promoting breast feeding to childbearing women. The efficacy and effectiveness of such a strategy is equivocal and there is little qualitative work examining group-based antenatal breast-feeding education. discourse analysis was used to explore the language and practises of midwives facilitating group antenatal breast-feeding education sessions at two Australian maternity facilities. Nine sessions were observed and tape recorded over a 12 month period. Each session lasted between 60 and 140 mins. the analysis revealed four dominate discourses midwives used to promote breast feeding during group-based antenatal education session. The predominant discourses 'There is only one feeding option': breast feeding' and 'Selling the 'breast is best' reflected how midwives used their personal and professional commitment to breast feeding, within supportive and protective policy frameworks, to convince as many pregnant women as possible to commit to breast feeding. Sessions were organised to ensure women and their partners were 'armed' with as much information as possible about the value of breastmilk, successful positioning and attachment and practical strategies to deal with early breast-feeding problems. Antenatal commitment to breast feeding was deemed necessary if women were to overcome potential hurdles and maintain a commitment to the supply of breast milk. The latter two discourses, drawn upon to promote the breast-feeding message, presented infants as 'hard wired' to breast feed and male partners as 'protectors' of breast feeding. midwives clearly demonstrated a passion and enthusiasm for breast-feeding education. Examining the dominant

Salmonella Radicidation of Dry Mixed Feeds and Feed Ingredients

Energy Technology Data Exchange (ETDEWEB)

Mossel, D. A.A. [Central Institute for Nutrition and Food Research TNO, Zeist (Netherlands); San Marcos University, Lima (Peru)

1967-11-15

Feed components contaminated with salmonellae act as vehicles in the transmission of these bacteria to slaughter animals and hence to meat and poultry. Terminal decontamination of ingredients or mixed feed seems required because sanitary improvements in processing, bagging and storage do not always appear effective in considerably reducing salmonella contamination rates. Experiments were carried out to assay the decontamination effect of pelletization of mixed feed. Enumeration of enterobacteriaceae was used as the analytical criterion. It appeared that a temperature over 80 Degree-Sign C generally led to five decimal reductions in enterobacteriaceae counts; however, also currently used lower temperatures may bring about two decimal reductions only. Following earlier experiments with fish meal, range finding tests on the decontamination of mixed feed with {sup 60}Co gamma rays were also performed. To achieve five decimal reductions in the counts of the most resistant enterobacteriaceae which were encountered about 0.5 Mrad was required; survival curves were generally not linear, so that overall effective dose had to be used as a parameter. Feeding experiments with rats, using 35% fish meal irradiated at 0.8 Mrad in the diet for two years, demonstrated that neither losses of nutritive value nor the occurrence of orally toxic factors is effected by such an irradiation treatment. It is recommended that pilot plant tests be carried out. In these tests an attempt should be made to combine improved sanitation and pelletizing with a terminal radiation treatment of the bagged material with the lowest dose required. Such tests should preferably be carried out in suitable areas of countries like Peru or Chile. A brief outline is given of the development work and training of scientific and technical staff that should be carried out during the installation of such a pilot plant. (author)

A History of Infant Feeding

Science.gov (United States)

Stevens, Emily E; Patrick, Thelma E; Pickler, Rita

2009-01-01

The historical evolution of infant feeding includes wet nursing, the feeding bottle, and formula use. Before the invention of bottles and formula, wet nursing was the safest and most common alternative to the natural mother's breastmilk. Society's negative view of wet nursing, combined with improvements of the feeding bottle, the availability of animal's milk, and advances in formula development, gradually led to the substitution of artificial feeding for wet nursing. In addition, the advertising and safety of formula products increased their popularity and use among society. Currently, infant formula-feeding is widely practiced in the United States and appears to contribute to the development of several common childhood illnesses, including atopy, diabetes mellitus, and childhood obesity. PMID:20190854

Enteral feeding without pancreatic stimulation

DEFF Research Database (Denmark)

Kaushik, Neeraj; Pietraszewski, Marie; Holst, Jens Juul

2005-01-01

OBJECTIVE: All forms of commonly practiced enteral feeding techniques stimulate pancreatic secretion, and only intravenous feeding avoids it. In this study, we explored the possibility of more distal enteral infusions of tube feeds to see whether activation of the ileal brake mechanism can result...

Effects of genetic mutations and chemical exposures on Caenorhabditis elegans feeding: evaluation of a novel, high-throughput screening assay.

Directory of Open Access Journals (Sweden)

Windy A Boyd

2007-12-01

Full Text Available Government agencies have defined a need to reduce, refine or replace current mammalian-based bioassays with testing methods that use alternative species. Invertebrate species, such as Caenorhabditis elegans, provide an attractive option because of their short life cycles, inexpensive maintenance, and high degree of evolutionary conservation with higher eukaryotes. The C. elegans pharynx is a favorable model for studying neuromuscular function, and the effects of chemicals on neuromuscular activity, i.e., feeding. Current feeding methodologies, however, are labor intensive and only semi-quantitative.Here a high-throughput assay is described that uses flow cytometry to measure C. elegans feeding by determining the size and intestinal fluorescence of hundreds of nematodes after exposure to fluorescent-labeled microspheres. This assay was validated by quantifying fluorescence in feeding-defective C. elegans (eat mutants, and by exposing wild-type nematodes to the neuroactive compounds, serotonin and arecoline. The eat mutations previously determined to cause slow pumping rates exhibited the lowest feeding levels with our assay. Concentration-dependent increases in feeding levels after serotonin exposures were dependent on food availability, while feeding levels decreased in arecoline-exposed nematodes regardless of the presence of food. The effects of the environmental contaminants, cadmium chloride and chlorpyrifos, on wild-type C. elegans feeding were then used to demonstrate an application of the feeding assay. Cadmium exposures above 200 microM led to a sharp drop in feeding levels. Feeding of chlorpyrifos-exposed nematodes decreased in a concentration-dependent fashion with an EC(50 of 2 microM.The C. elegans fluorescence microsphere feeding assay is a rapid, reliable method for the assessment of neurotoxic effects of pharmaceutical drugs, industrial chemicals or environmental agents. This assay may also be applicable to large scale genetic or

Slurry feed variability in West Valley's melter feed tank and sampling system

International Nuclear Information System (INIS)

Fow, C.L.; Kurath, D.E.; Pulsipher, B.A.; Bauer, B.P.

1989-04-01

The present plan for disposal of high-level wastes at West Valley is to vitrify the wastes for disposal in deep geologic repository. The vitrification process involves mixing the high-level wastes with glass-forming chemicals and feeding the resulting slurry to a liquid-fed ceramic melter. Maintaining the quality of the glass product and proficient melter operation depends on the ability of the melter feed system to produce and maintain a homogeneous mixture of waste and glass-former materials. To investigate the mixing properties of the melter feed preparation system at West Valley, a statistically designed experiment was conducted using synthetic melter feed slurry over a range of concentrations. On the basis of the statistical data analysis, it was found that (1) a homogeneous slurry is produced in the melter feed tank, (2) the liquid-sampling system provides slurry samples that are statistically different from the slurry in the tank, and (3) analytical measurements are the major source of variability. A statistical quality control program for the analytical laboratory and a characterization test of the actual sampling system is recommended. 1 ref., 5 figs., 1 tab

Performance enhancement of implantable medical antenna using differential feed technique

Directory of Open Access Journals (Sweden)

Shankar Bhattacharjee

2016-03-01

Full Text Available The health care industry is continuously revolutionizing and advancing towards developing more efficient system suitable for human body. Today implantable devices have become a more interesting topic in health care services which primarily started with the pacemakers. Since then it is continuously evolving due to its non-invasive nature, instant monitoring and diagnosis, and periodic simulation. The main goal of these implantable devices is to efficiently monitor or inspect various ailments in the body and then transmits this to the server or base station. For proper communication between the implant and the base station, antenna design is of prime importance. In this paper MEMS based differentially fed dual band antenna has been proposed and can be used both in Medical Implant Communication Service (MICS band for transmission of data and industrial, scientific and medical (ISM band for wake-up purpose. The proposed antenna has been simulated for free space scenario and has been found to radiate in both MICS & ISM band with S11 of −17.62 dB and −14.31 dB respectively. Subsequently the antenna is inserted within a skin mimicking model with equivalent dielectric features and the results show variation in radiation characteristics between free space condition and within skin phantom. The design of the antenna has been optimized in such a way that minimum deviation occurs between the two conformal conditions. With the use of differential feeding technique performance of the antenna is quite enhanced in terms of various parameters when compared with single feed.

Rooftop photovoltaic (PV) systems : a cost–benefit analysis study of industrial halls

NARCIS (Netherlands)

Lee, B.; Trcka, M.; Hensen, J.L.M.

2013-01-01

Rooftop photovoltaic (PV) systems can be readily deployed on industrial halls with relatively large rooftop area. Feed-in tariff above the base price of electricity is offered in many countries to subsidize the high initial investment of PV systems. In order to fully capitalize the benefit of the

A comparative study of cultural methods for the detection of Salmonella in feed and feed ingredients

Directory of Open Access Journals (Sweden)

Haggblom Per

2009-02-01

Full Text Available Abstract Background Animal feed as a source of infection to food producing animals is much debated. In order to increase our present knowledge about possible feed transmission it is important to know that the present isolation methods for Salmonella are reliable also for feed materials. In a comparative study the ability of the standard method used for isolation of Salmonella in feed in the Nordic countries, the NMKL71 method (Nordic Committee on Food Analysis was compared to the Modified Semisolid Rappaport Vassiliadis method (MSRV and the international standard method (EN ISO 6579:2002. Five different feed materials were investigated, namely wheat grain, soybean meal, rape seed meal, palm kernel meal, pellets of pig feed and also scrapings from a feed mill elevator. Four different levels of the Salmonella serotypes S. Typhimurium, S. Cubana and S. Yoruba were added to each feed material, respectively. For all methods pre-enrichment in Buffered Peptone Water (BPW were carried out followed by enrichments in the different selective media and finally plating on selective agar media. Results The results obtained with all three methods showed no differences in detection levels, with an accuracy and sensitivity of 65% and 56%, respectively. However, Müller-Kauffmann tetrathionate-novobiocin broth (MKTTn, performed less well due to many false-negative results on Brilliant Green agar (BGA plates. Compared to other feed materials palm kernel meal showed a higher detection level with all serotypes and methods tested. Conclusion The results of this study showed that the accuracy, sensitivity and specificity of the investigated cultural methods were equivalent. However, the detection levels for different feed and feed ingredients varied considerably.

Host feeding in insect parasitoids: why destructively feed upon a host that excretes an alternative?

NARCIS (Netherlands)

Burger, J.S.M.; Reijnen, T.M.; Van Lenteren, J.C.; Vet, L.E.M.

2004-01-01

Host feeding is the consumption of host tissue by the adult female parasitoid. We studied the function of destructive host feeding and its advantage over non-destructive feeding on host-derived honeydew in the whitefly parasitoid Encarsia formosa Gahan (Hymenoptera: Aphelinidae). We allowed

Feed intake and behavior of dairy goats when offered an elevated feed bunk.

Science.gov (United States)

Neave, Heather W; von Keyserlingk, Marina A G; Weary, Daniel M; Zobel, Gosia

2018-04-01

Goats are browsers and select vegetation at various heights when foraging. On commercial farms, dairy goats are typically fed from low-level feed bunks. The objective of this study was to determine how feed intake and feeding behavior vary when goats are offered feed at variable heights, with the potential of evaluating the benefits of offering an elevated feeder to dairy goats. Thirteen Saanen X dairy goats were housed in a home pen with a lying area of wood shavings, where they were pre-exposed for 24 d to 3 feeder heights designed to result in differences in head height while feeding: floor level (head lowered relative to body), head level (head level relative to body), and elevated level (head and neck angled upward). Nine groups of 3 goats each were randomly selected and housed for 24 h in a test pen identical to the home pen except that it contained 1 of each of the 3 feeder heights. Each feeder contained ad libitum chopped alfalfa silage and a top-dressed corn-based supplement, refreshed twice daily. Refusals from inside and under each feeder were weighed to calculate intake. Feed intake increased with increasing feeder height (mean ± SE; 0.18, 0.29, and 0.34 ± 0.04 kg of DM/goat for floor-level, head-level, and elevated-level feeders, respectively). Total feeding time did not vary with feeder height, but feeding rate tended to be faster at the elevated-level feeder (14.5 ± 2.1 g of DM/min) compared with head-level (9.2 ± 2.3 g of DM/min) and floor-level (8.9 ± 2.1 g of DM/min) feeders. Goats visited the floor-level feeder (36.4 ± 8.4 visits/goat) less than the head-level (79.4 ± 8.4 visits/goat) and elevated-level (74.8 ± 8.4 visits/goat) feeders. The number of displacements per minute of feeding time (physical removal of another goat from the feeding place) was greater at the elevated-level feeder (0.46 ± 0.06 displacements/min) compared with the floor-level feeder (0.23 ± 0.06 displacements/min) and tended to differ from the head-level feeder (0

NUCLEOTIDES IN INFANT FEEDING

Directory of Open Access Journals (Sweden)

L.G. Mamonova

2007-01-01

Full Text Available The article reviews the application of nucleotides-metabolites, playing a key role in many biological processes, for the infant feeding. The researcher provides the date on the nucleotides in the women's milk according to the lactation stages. She also analyzes the foreign experience in feeding newborns with nucleotides-containing milk formulas. The article gives a comparison of nucleotides in the adapted formulas represented in the domestic market of the given products.Key words: children, feeding, nucleotides.

Innovative Feed-In Tariff Designs that Limit Policy Costs

Energy Technology Data Exchange (ETDEWEB)

Kreycik, Claire [National Renewable Energy Lab. (NREL), Golden, CO (United States); Couture, Toby D. [E3 Analytics, Berlin (Germany); Cory, Karlynn S. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2011-06-01

Feed-in tariffs (FITs) are the most prevalent policy used globally to reduce development risks, cut financing costs, and grow the renewable energy industry. However, concerns over escalating costs in jurisdictions with FIT policies have led to increased attention on cost control. Using case studies and market-focused analysis, this report from the National Renewable Energy Laboratory (NREL) examines strengths and weaknesses of three cost-containment tools: (1) caps, (2) payment level adjustment mechanisms, and (3) auction-based designs. The report provides useful insights on containing costs for policymakers and regulators in the United States and other areas where FIT policies are in development.

Rheological Studies on Pretreated Feed and Melter Feed from AW-101 and AN-107

International Nuclear Information System (INIS)

Bredt, Paul R; Swoboda, Robert G

2001-01-01

Rheological and physical properties testing were conducted on actual AN-107 and AW-101 pretreated feed samples prior to the addition of glass formers. Analyses were repeated following the addition of glass formers. The AN-107 and AW-101 pretreated feeds were tested at the target sodium values of nominally 6, 8, and 10 M. The AW-101 melter feeds were tested at these same concentrations, while the AN-107 melter feeds were tested at 5, 6, and 8 M with respect to sodium. These data on actual waste are required to validate and qualify results obtained with simulants

Simulation assessment of continuous simulating moving bed chromatography process with partial feed and new strategy with partial feed

Directory of Open Access Journals (Sweden)

H. Khan

2009-09-01

Full Text Available Partial Feed simulating moving bed (SMB has proved to be more efficient in binary separation performance (purity, recovery, productivity because of its two additional degrees of freedom, namely feed length and feed time, as compared to classical SMB process. The binary separation of dextran T6 and fructose with linear isotherm is modeled with Aspen Chromatography simulator in a four zone SMB with one column per zone for both normal-feed and Partial Feed. Increase in number of feed length and feed time in the cycle plays a very important role in the separation performance with Partial Feed. In addition, the effect of mode of operation (early or late introduction of increase in number of feed length in the cycle on product purity and recovery is also investigated. Furthermore, the binary separation system is designed with the safety margin method and the optimum operating parameters for simulation are calculated with triangle theory. Finally, a new strategy with Partial Feed is developed, showing improved separation performance relative to the basic four-zone SMB with regard to extract stream purity and recovery. The results of the proposed study can served as a useful summary of Partial Feed operation.

An alternative process to treat boiler feed water for reuse.

Science.gov (United States)

Guirgis, Adel; Ghosh, Jyoti P; Achari, Gopal; Langford, Cooper H; Banerjee, Daliya

2012-09-01

A bench-scale process to treat boiler feed water for reuse in steam generation was developed. Industrial water samples from a steam-assisted gravity drainage plant in northern Alberta, Canada, were obtained and samples characterized. The technology, which consists of coagulation-settling to remove oil/grease and particulates followed by an advanced oxidative treatment, led to clean water samples with negligible organic carbon. Coagulation followed by settling removed most particulates and some insoluble organics. The advanced oxidative treatment removed any remaining color in the samples, decreased the organic content to near-zero, and provided water ready for reuse.

Micro -algae biomass as an alternative resource for fishmeal and fish oil in the production of fish feed

DEFF Research Database (Denmark)

Safafar, Hamed

evident that the continued exploitation of industrial fish as a resource fish feed will ultimately become both environmentally and economically unsustainable. Microalgae are at the base of the entire aquatic food chain and play a major role in the diet of aquatic animals such as fish. Microalgae’s main...... application for aquaculture are related to nutrition, being used as a sole fresh feed or an additive, e.g. source of pigment. Algae produce almost all nutritious compounds which are required for fish. The diverse biochemical composition of microalgae represents them as a promising candidate...... for the formulation of fish feed. The nutritional composition of microalgae depends on the species, environmental conditions and growth medium composition. Microalgae for use in aquaculture should be non-toxic and possess the essential nutritive constituents, in a reasonable price. Photosynthetic production of algae...

Treatment of animal feeds with ionizing radiation. V: Petition and clearance for radicidized poultry feed

International Nuclear Information System (INIS)

Eisenberg, E.; Lapidot, M.

1978-01-01

The experience obtained in Israel regarding procedures for petitioning and granting clearance for irradiated food is briefly reviewed. The Israel Ministry of Health deliberated on the approach to be taken towards irradiated farm animal feed, since feed is normally dealt with under Ministry of Agriculture Plant Protection Division Regulations. A similar situation existed in Canada, where the Feed and Fertilizer Section, Plant Products Division, granted clearance of radicidized poultry feed. However, since the meat of farm animals raised on radicidized feed is to be consumed by humans, and is thus included in the definition of food in the Public Health (Rules as to Food) Ordinance, the Ministry of Health finally decided that it would require a regular petition. The petition to clear irradiated poultry feed is described in detail. It is based on local studies as well as on the detailed material prepared by the Canadian authorities in their petition and the clearance. The petition was submitted in October 1972 and clearance was obtained in July 1973. The implementation of the legislative requirements in the forthcoming pilot scale test, aimed at radicidization of 300 tons of poultry feed, is considered in detail. (author)

Determining the amount of waste plastics in the feed of Austrian waste-to-energy facilities.

Science.gov (United States)

Schwarzböck, Therese; Van Eygen, Emile; Rechberger, Helmut; Fellner, Johann

2017-02-01

Although thermal recovery of waste plastics is widely practiced in many European countries, reliable information on the amount of waste plastics in the feed of waste-to-energy plants is rare. In most cases the amount of plastics present in commingled waste, such as municipal solid waste, commercial, or industrial waste, is estimated based on a few waste sorting campaigns, which are of limited significance with regard to the characterisation of plastic flows. In the present study, an alternative approach, the so-called Balance Method, is used to determine the total amount of plastics thermally recovered in Austria's waste incineration facilities in 2014. The results indicate that the plastics content in the waste feed may vary considerably among different plants but also over time. Monthly averages determined range between 8 and 26 wt% of waste plastics. The study reveals an average waste plastics content in the feed of Austria's waste-to-energy plants of 16.5 wt%, which is considerably above findings from sorting campaigns conducted in Austria. In total, about 385 kt of waste plastics were thermally recovered in all Austrian waste-to-energy plants in 2014, which equals to 45 kg plastics cap -1 . In addition, the amount of plastics co-combusted in industrial plants yields a total thermal utilisation rate of 70 kg cap -1  a -1 for Austria. This is significantly above published rates, for example, in Germany reported rates for 2013 are in the range of only 40 kg of waste plastics combusted per capita.

Patterns of contact within the New Zealand poultry industry.

Science.gov (United States)

Lockhart, C Y; Stevenson, M A; Rawdon, T G; Gerber, N; French, N P

2010-07-01

Members of the Poultry Industry Association and the Egg Producers Federation of New Zealand (n=420) were sent a questionnaire asking them to describe the type and frequency of on- and off-enterprise movements relating to feed, live birds and hatching eggs, table eggs and poultry product, and manure and waste litter. Social network analyses were used to describe patterns of contact among poultry enterprises and their associates for these four movement types. The response rate to the survey was 58% (244 out of 420). Network structures for enterprise-to-enterprise movements of feed, live birds and hatching eggs, and table egg and poultry product were characterised by 'hub and spoke' type structures with small-world characteristics. Small worlds were created by network hubs (e.g. feed suppliers and hatcheries) providing goods and services to larger numbers of client farms. In addition to hubs acting as the predominant source of material moving onto farms we identified enterprises acting as bridges between identified small worlds. The presence of these bridges is a concern, since their presence has the potential to facilitate the spread of hazards (e.g. feed contaminants, infectious agents carried within feed) more readily throughout the population. An ability to predict enterprises with these network characteristics on the basis of factors such as shed capacity, enterprise type, geographic location would be useful for developing risk-based approaches to disease prevention, surveillance, detection, response and control activities. Copyright (c) 2010 Elsevier B.V. All rights reserved.

Gastrostomy feeding tube - bolus

Science.gov (United States)

Feeding - gastrostomy tube - bolus; G-tube - bolus; Gastrostomy button - bolus; Bard Button - bolus; MIC-KEY - bolus ... KEY, 3 to 8 weeks after surgery. These feedings will help your child grow strong and healthy. ...

Effects of correcting in situ ruminal microbial colonization of feed particles on the relationship between ruminally undegraded and intestinally digested crude protein in concentrate feeds.

Science.gov (United States)

González, Javier; Mouhbi, Rabiaa; Guevara-González, Jesús Alberto; Arroyo, José María

2018-02-01

In situ estimates of ruminally undegraded protein (RUP) and intestinally digested protein (IDP) of ten concentrates, uncorrected or corrected for the ruminal microbial colonization, were used to examine the effects of this correction on the relationship between IDP and RUP values. Both variables were established for three rumen and duodenum cannulated wethers using 15 N labeling-techniques and considering measured rates of ruminal particle comminution (k c ) and outflow (k p ). A covariance analysis showed that the close relationship found between both variables (IDP = -0.0132 ± 0.00679 + 0.776 ± 0.0002 RUP; n = 60; P content in concentrates and industrial by-products can be predicted from RUP values, thus avoiding the laborious and complex procedure of determining intestinal digestibility; however, a larger sample of feeds is necessary to achieve more accurate predictions. The lack of influence of the correction for microbial contamination on the prediction observed in the present study increases the data available for this prediction. However, only the use of corrected values may provide an accurate evaluation. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

Infant feeding: beyond the nutritional aspects.

Science.gov (United States)

Silva, Giselia A P; Costa, Karla A O; Giugliani, Elsa R J

2016-01-01

To draw attention to the importance of interaction between caregiver and child during feeding and the influence of parenting style on dietary habit formation. A search was performed in the PubMed and Scopus databases for articles addressing responsive feeding; the articles considered most relevant by the authors were selected. The way children are fed is decisive for the formation of their eating habits, especially the strategies that parents/caregivers use to stimulate feeding. In this context, responsive feeding has been emphasized, with the key principles: feed the infant directly and assist older children when they already eat on their own; feed them slowly and patiently, and encourage children to eat but do not force them; if the child refuses many types of foods, experiment with different food combinations, tastes, textures, and methods of encouragement; minimize distractions during meals; and make the meals an opportunity for learning and love, talking to the child during feeding and maintaining eye contact. It is the caregiver's responsibility to be sensitive to the child's signs and alleviate tensions during feeding, and make feeding time pleasurable; whereas it is the child's role to clearly express signs of hunger and satiety and be receptive to the caregiver. Responsive feeding is very important in dietary habit formation and should be encouraged by health professionals in their advice to families. Copyright © 2016. Published by Elsevier Editora Ltda.

Characterization of feed channel spacer performance using geometries obtained by X-ray computed tomography

KAUST Repository

Haaksman, Viktor A.

2016-09-09

Spiral-wound membrane modules used in water treatment for water reuse and desalination make use of spacer meshes for keeping the membrane leaves apart and for enhancing the mass transfer. Computational fluid dynamics (CFD) has gained importance in the design of new spacers with optimized hydrodynamic characteristics, but this requires a precise description of the spacer geometry. This study developed a method to obtain accurate three-dimensional (3-D) geometry representations for any given spacer design from X-ray computed tomography (CT) scans. The method revealed that the filaments of industrial spacers have a highly variable cross-section size and shape, which impact the flow characteristics in the feed channel. The pressure drop and friction factors were calculated from numerical simulations on five commercially available feed spacers used in practice. Model solutions compared well to experimental data measured using a flow cell for average velocities up to 0.2 m/s, as used in industrial reverse osmosis and nanofiltration membrane operations. A newly-proposed spacer geometry with alternating strand thickness was tested, which was found to yield a lower pressure drop while being highly efficient in converting the pumping power into membrane shear. Numerical model solutions using CFD with geometries from CT scans were closer to measurements than those obtained using the traditional circular cross-section strand simplification, indicating that CT scans are very well suitable to approximate real feed spacer geometries. By providing detailed insight on the spacer filament shape, CT scans allow better quantification of local distribution of velocity and shear, possibly leading to more accurate estimations of fouling and concentration polarization. © 2016 Elsevier B.V.

Environmental and health impacts of using food waste as animal feed: a comparative analysis of food waste management options.

Science.gov (United States)

Salemdeeb, Ramy; Zu Ermgassen, Erasmus K H J; Kim, Mi Hyung; Balmford, Andrew; Al-Tabbaa, Abir

2017-01-01

The disposal of food waste is a large environmental problem. In the United Kingdom (UK), approximately 15 million tonnes of food are wasted each year, mostly disposed of in landfill, via composting, or anaerobic digestion (AD). European Union (EU) guidelines state that food waste should preferentially be used as animal feed though for most food waste this practice is currently illegal, because of disease control concerns. Interest in the potential diversion of food waste for animal feed is however growing, with a number of East Asian states offering working examples of safe food waste recycling - based on tight regulation and rendering food waste safe through heat treatment. This study investigates the potential benefits of diverting food waste for pig feed in the UK. A hybrid, consequential life cycle assessment (LCA) was conducted to compare the environmental and health impacts of four technologies for food waste processing: two technologies of South Korean style-animal feed production (as a wet pig feed and a dry pig feed) were compared with two widespread UK disposal technologies: AD and composting. Results of 14 mid-point impact categories show that the processing of food waste as a wet pig feed and a dry pig feed have the best and second-best scores, respectively, for 13/14 and 12/14 environmental and health impacts. The low impact of food waste feed stems in large part from its substitution of conventional feed, the production of which has substantial environmental and health impacts. While the re-legalisation of the use of food waste as pig feed could offer environmental and public health benefits, this will require support from policy makers, the public, and the pig industry, as well as investment in separated food waste collection which currently occurs in only a minority of regions.

Assessment of aflatoxin B1 in livestock feed and feed ingredients by high-performance thin layer chromatography

Directory of Open Access Journals (Sweden)

Korrapati Kotinagu

2015-12-01

Full Text Available Aim: Detection of aflatoxin B1 in Livestock compound Feed and feed ingredients by high-performance thin layer chromatography (HPTLC. Materials and Methods: Chromatography was performed on HPTLC silica gel 60 F 254, aluminum sheets by CAMAG automatic TLC sampler 4, with mobile phase condition chloroform:acetone:water (28:4:0.06. Extraction of aflatoxin B1 from samples was done as per AOAC method and screening and quantification done by HPTLC Scanner 4 under wavelength 366 nm. Results: A total of 97 livestock feed (48 and feed ingredients (49 samples received from different livestock farms and farmers were analyzed for aflatoxin B1of which 29 samples were contaminated, constituting 30%. Out of 48 livestock compound feed samples, aflatoxin B1 could be detected in 16 samples representing 33%, whereas in livestock feed ingredients out of 49 samples, 13 found positive for aflatoxin B1 representing 24.5%. Conclusion: HPTLC assures good recovery, precision, and linearity in the quantitative determination of aflatoxin B1 extracted from Livestock compound feed and feed ingredients. As more number of feed and feed ingredients are contaminated with aflatoxin B1 which causes deleterious effects in both animal and human beings, so there is a need for identifying the source of contamination, executing control measures, enabling better risk assessment techniques, and providing economic benefits.

Microbial community structures in algae cultivation ponds for bioconversion of agricultural wastes from livestock industry for feed production

Science.gov (United States)

Dynamics of seasonal microbial community compositions in algae cultivation ponds are complex. There is very limited knowledge on community compositions that may play significant roles in the bioconversion of manure nu¬trients to animal feed. Algae production is an alternative where land area for pro...

Rooftop photovoltaic (PV) systems for industrial halls: Achieving economic benefit via lowering energy demand

NARCIS (Netherlands)

Lee, B.; Trcka, M.; Hensen, J.L.M.

2012-01-01

Industrial halls are characterized with their relatively high roof-to-floor ratio, which facilitates ready deployment of renewable energy generation, such as photovoltaic (PV) systems, on the rooftop. To promote deployment of renewable energy generation, feed-in tariff (FIT) higher than the

Parental control over feeding in infancy. Influence of infant weight, appetite and feeding method.

Science.gov (United States)

Fildes, Alison; van Jaarsveld, Cornelia H M; Llewellyn, Clare; Wardle, Jane; Fisher, Abigail

2015-08-01

Parental control over feeding has been linked to child overweight. Parental control behaviours have been assumed to be exogenous to the child, but emerging evidence suggests they are also child-responsive. This study tests the hypothesis that parental control in early infancy is responsive to infant appetite and weight. Participants were 1920 mothers from the Gemini twin cohort, using one randomly selected child per family. Data come from questionnaires completed when the children were approximately 8 months. Mothers completed measures of 'pressure' and 'restriction', reported feeding method (breast- and bottle feeding), rated their infant's appetite during the first 3 months, provided health professional recorded weight measurements, and reported their concerns about their infant's weight. Logistic regression examined predictors of 'pressure' and 'restriction', adjusting for maternal demographics and BMI. Interactions between feeding method and control were also tested. 'Pressure' was associated with lower birth weight (OR = 0.79, 95% CI: 0.65-0.97), greater concern about underweight (OR = 1.88, 1.29-2.75), and lower infant appetite (OR = 0.59, 0.47-0.75). 'Restriction' was associated with higher appetite (OR = 1.44, 1.09-1.89) and bottle feeding (OR = 2.86, 2.18-3.75). A significant interaction with feeding method indicated that infants with high appetites were more likely to be restricted only if they were bottle-fed (OR = 1.52, 1.13-2.04). Mothers vary in their levels of control over milk-feeding and this is partly responsive to the infant's characteristics. They tend to pressure infants who are lighter and have a smaller appetite, and restrict infants with larger appetites if they are bottle-fed. Guidance on infant feeding may be better received if it acknowledges that parents respond to infant characteristics in order to achieve their feeding goals. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

Parental control over feeding in infancy. Influence of infant weight, appetite and feeding method☆

Science.gov (United States)

Fildes, Alison; van Jaarsveld, Cornelia H.M.; Llewellyn, Clare; Wardle, Jane; Fisher, Abigail

2015-01-01

Background and objective: Parental control over feeding has been linked to child overweight. Parental control behaviours have been assumed to be exogenous to the child, but emerging evidence suggests they are also child-responsive. This study tests the hypothesis that parental control in early infancy is responsive to infant appetite and weight. Subjects and methods: Participants were 1920 mothers from the Gemini twin cohort, using one randomly selected child per family. Data come from questionnaires completed when the children were approximately 8 months. Mothers completed measures of ‘pressure’ and ‘restriction’, reported feeding method (breast- and bottle feeding), rated their infant's appetite during the first 3 months, provided health professional recorded weight measurements, and reported their concerns about their infant's weight. Logistic regression examined predictors of ‘pressure’ and ‘restriction’, adjusting for maternal demographics and BMI. Interactions between feeding method and control were also tested. Results: ‘Pressure’ was associated with lower birth weight (OR = 0.79, 95% CI: 0.65–0.97), greater concern about underweight (OR = 1.88, 1.29–2.75), and lower infant appetite (OR = 0.59, 0.47–0.75). ‘Restriction’ was associated with higher appetite (OR = 1.44, 1.09–1.89) and bottle feeding (OR = 2.86, 2.18–3.75). A significant interaction with feeding method indicated that infants with high appetites were more likely to be restricted only if they were bottle-fed (OR = 1.52, 1.13–2.04). Conclusion: Mothers vary in their levels of control over milk-feeding and this is partly responsive to the infant's characteristics. They tend to pressure infants who are lighter and have a smaller appetite, and restrict infants with larger appetites if they are bottle-fed. Guidance on infant feeding may be better received if it acknowledges that parents respond to infant characteristics in order to achieve

Review and Analysis of Alternatives for the Valorisation of Agro-Industrial Olive Oil By-Products

Directory of Open Access Journals (Sweden)

Julio Berbel

2018-01-01

Full Text Available By-products and waste from olive production (agriculture and the olive oil industry (mills and refineries are an important environmental issue in Mediterranean areas. Industrial waste and by-products contain highly valuable components that can also be phytotoxic. This article reviews recent research on the valorisation of olive by-products under the bioeconomy strategy. The alternatives are classified according to the ‘bioeconomy value pyramid’, which prioritises higher value uses over the current energy and compost valorisation. Special attention is paid to the use of these by-products for animal feed that can be improved by reducing the content of saturated fatty acids (SFAs and increase the polyunsaturated fatty acids amount considered beneficial in response to their use; this makes the food healthier for humans while simultaneously reducing feeding costs and the environmental impact of livestock.

Pressuring and restrictive feeding styles influence infant feeding and size among a low-income African-American sample.

Science.gov (United States)

Thompson, Amanda L; Adair, Linda S; Bentley, Margaret E

2013-03-01

The prevalence of overweight among infants and toddlers has increased dramatically in the past three decades, highlighting the importance of identifying factors contributing to early excess weight gain, particularly in high-risk groups. Parental feeding styles and the attitudes and behaviors that characterize parental approaches to maintaining or modifying children's eating behavior are an important behavioral component shaping early obesity risk. Using longitudinal data from the Infant Care and Risk of Obesity Study, a cohort study of 217 African-American mother-infant pairs with feeding styles, dietary recalls, and anthropometry collected from 3 to 18 months of infant age, we examined the relationship between feeding styles, infant diet, and weight-for-age and sum of skinfolds. Longitudinal mixed models indicated that higher pressuring and indulgent feeding style scores were positively associated with greater infant energy intake, reduced odds of breastfeeding, and higher levels of age-inappropriate feeding of liquids and solids, whereas restrictive feeding styles were associated with lower energy intake, higher odds of breastfeeding, and reduced odds of inappropriate feeding. Pressuring and restriction were also oppositely related to infant size with pressuring associated with lower infant weight-for-age and restriction with higher weight-for-age and sum of skinfolds. Infant size also predicted maternal feeding styles in subsequent visits indicating that the relationship between size and feeding styles is likely bidirectional. Our results suggest that the degree to which parents are pressuring or restrictive during feeding shapes the early feeding environment and, consequently, may be an important environmental factor in the development of obesity. Copyright © 2012 The Obesity Society.

Feeding a sustainable chemical industry: do we have the bioproducts cart before the feedstocks horse?

Science.gov (United States)

Dale, Bruce E

2017-09-21

A sustainable chemical industry cannot exist at scale without both sustainable feedstocks and feedstock supply chains to provide the raw materials. However, most current research focus is on producing the sustainable chemicals and materials. Little attention is given to how and by whom sustainable feedstocks will be supplied. In effect, we have put the bioproducts cart before the sustainable feedstocks horse. For example, bulky, unstable, non-commodity feedstocks such as crop residues probably cannot supply a large-scale sustainable industry. Likewise, those who manage land to produce feedstocks must benefit significantly from feedstock production, otherwise they will not participate in this industry and it will never grow. However, given real markets that properly reward farmers, demand for sustainable bioproducts and bioenergy can drive the adoption of more sustainable agricultural and forestry practices, providing many societal "win-win" opportunities. Three case studies are presented to show how this "win-win" process might unfold.

Infant feeding in Eastern Scotland: a longitudinal mixed methods evaluation of antenatal intentions and postnatal satisfaction--the Feeding Your Baby study.

Science.gov (United States)

Symon, Andrew G; Whitford, Heather; Dalzell, Janet

2013-07-01

breast-feeding initiation rates have improved in Scotland, but exclusive and partial breast-feeding rates fall rapidly for several reasons. We aimed to examine whether antenatal feeding intention was associated with satisfaction with infant feeding method; and to explore the similarities and differences in infant feeding experience of women with different antenatal feeding intention scores. antenatal questionnaire assessment of infant feeding intentions, based on the theory of planned behaviour; two-weekly postnatal follow-up of infant feeding practice by text messaging; final telephone interview to determine reasons for and satisfaction with infant feeding practice. 355 women in eastern Scotland were recruited antenatally; 292 completed postnatal follow up. Antenatal feeding intentions broadly predicted postnatal practice. The highest satisfaction scores were seen in mothers with no breast-feeding intention who formula fed from birth, and those with high breast-feeding intention who breastfed for more than 8 weeks. The lowest satisfaction scores were seen in those with high intention scores who only managed to breast feed for less than 3 weeks. This suggests that satisfaction with infant feeding is associated with achieving feeding goals, whether artificial milk or breast feeding. Reasons for stopping breast feeding were broadly similar over time (too demanding, pain, latching, perception of amount of milk, lack of professional support, sibling jealousy). Perseverance appeared to mark out those women who managed to breast feed for longer; this was seen across the socio-economic spectrum. Societal and professional pressure to breast feed was commonly experienced. satisfaction with actual infant feeding practice is associated with antenatal intention; levels are higher for those meeting their goals, whether formula feeding from birth or breast feeding for longer periods. Perceived pressure to breast feed raises questions about informed decision making. Identifying

Infant feeding: beyond the nutritional aspects

Directory of Open Access Journals (Sweden)

Giselia A.P. Silva

2016-06-01

Full Text Available ABSTRACT Objective: To draw attention to the importance of interaction between caregiver and child during feeding and the influence of parenting style on dietary habit formation. Source of data: A search was performed in the PubMed and Scopus databases for articles addressing responsive feeding; the articles considered most relevant by the authors were selected. Synthesis of data: The way children are fed is decisive for the formation of their eating habits, especially the strategies that parents/caregivers use to stimulate feeding. In this context, responsive feeding has been emphasized, with the key principles: feed the infant directly and assist older children when they already eat on their own; feed them slowly and patiently, and encourage children to eat but do not force them; if the child refuses many types of foods, experiment with different food combinations, tastes, textures, and methods of encouragement; minimize distractions during meals; and make the meals an opportunity for learning and love, talking to the child during feeding and maintaining eye contact. It is the caregiver's responsibility to be sensitive to the child's signs and alleviate tensions during feeding, and make feeding time pleasurable; whereas it is the child's role to clearly express signs of hunger and satiety and be receptive to the caregiver. Conclusion: Responsive feeding is very important in dietary habit formation and should be encouraged by health professionals in their advice to families.

Feed quality in swine diet

Directory of Open Access Journals (Sweden)

Živković Branislav

2002-01-01

Full Text Available The paper will demonstrate the quality of some feed used in swine diet. The emphasis will be on feed whose incorporation into mixes could result in unfavorable effects on production, health and economic production of swine. Data will be presented on maize and its possible negative effects, having in mind toxins. Soybean meal, or genetically modified soybean meal, will also be observed. The next feed which will be discussed will be soybean whey obtained by different procedures and the potential dangers of its use in swine diet rations. Sunflower meal, feed of animal origin, with emphasis on fish flour and meat-bone flour will also be covered in the work. A feed which has been attracting particular attention lately is yeast imported from Italy. Its quality characteristics will be discussed, the so-called non-protein nitrogen. Analyses of mineral feed will include sources of phosphorus, phosphates (monocalciumphosphate, dicalcium phosphate phytases and resolving the problem of phosphorus in swine rations. Finally, an inevitable segment are synthetic amino acids, especially lysine and its role in swine diet.

Long-Term Occurrence of Deoxynivalenol in Feed and Feed Raw Materials with a Special Focus on South Korea

Directory of Open Access Journals (Sweden)

Juhee Park

2018-03-01

Full Text Available The Fusarium fungi produce toxic substances called mycotoxins, which can cause disease and harmful effects in grains, livestock, and humans. Deoxynivalenol (DON, also known as vomitoxin, is one of the Fusarium mycotoxins that is known to cause vomiting in livestock. This study shows the occurrence of deoxynivalenol in feedstuffs (compound feed and feed ingredients between 2009 and 2016 in South Korea. A total of 653 domestic samples were collected at five time points, including 494 compound feed samples and 159 feed ingredient samples. DON contamination levels were analyzed using high-performance liquid chromatography (HPLC with pretreatment using an immunoaffinity column (IAC. The limit of detection (LOD and the limit of quantification (LOQ were estimated at 1–10 µg/kg and 3–35 µg/kg, respectively. Two compound feeds (two gestating sow feed samples out of 160 pig feed samples exceeded the European Commission (EC guidance value, while no feed ingredient samples exceeded the EC or South Korean guidance values. There were statistically significant differences in the mean contamination levels of compound feed and feed ingredients that indicated a decreasing trend over time.

Effect of The Phytase Enzyme Addition in The Artificial Feed on Digestibility of Feed, Feed Conversion Ratio and Growth of Gift Tilapia Saline Fish (Oreochromis niloticus) Nursery Stadia I

Science.gov (United States)

Rachmawati, Diana; Samidjan, Istiyanto; Elfitasari, Tita

2018-02-01

The purpose of this study was to determine the effect of adding the phytase enzyme in the artificial feed on digestibility of feed, feed conversion ratio and growth of gift tilapia saline fish (Oreochromis niloticus) nursery stadia I. The fish samples in this study used gift tilapia saline fish (O. niloticus) with an average weight of 0,62 ± 0,008 g/fish and the stocking density of 1 fish1 L. Experimental method used in this study was completely randomized design with 4 treatments and 3 repetitions. The treatments were by adding phytase enzyme in artificial feed with the different level of doses those were A (0 FTU kg1 feed), B (500 FTU kg1 feed), C (1000 FTU kg1 feed) and D (1500 FTU kg1 feed). The results show that the addition of phytase enzyme was significantly (P0.05) affected on Survival Rate (SR) of gift tilapia saline fish. The optimum doses of phytase enzyme on RGR, FCR, PER, ADCP and ADCF of gift tilapia saline fish ranged from 1060 to 1100 FTU kg-1 feed.

Exotic plant species around Jeongeup Research Complex and RFT industrial complex

International Nuclear Information System (INIS)

Kim, Jin Kyu; Cha, Min Kyoung; Ryu, Tae Ho; Lee, Yun Jong; Kim, Jin Hong

2015-01-01

In Shinjeong-dong of Jeongeup, there are three government-supported research institutes and an RFT industrial complex which is currently being established. Increased human activities can affect flora and fauna as a man-made pressure onto the region. As a baseline study, status of exotic plants was investigated prior to a full operation of the RFT industrial complex. A total of 54 species and 1 variety of naturalized or introduced plants were found in the study area. Among them, three species (Ambrosia artemisifolia var. elatior, Rumex acetocella and Aster pilosus) belong to 'nuisance species', and four species (Phytolacca americana, Iopomoea hederacea, Ereechtites hieracifolia and Rudbeckia laciniata) to ‘monitor species’ designated by the ministry of Environment. Some of naturalized trees and plants were intentionally introduced in this area, while others naturally immigrated. Physalis angulata seems to immigrate in the study area in the form of mixture with animal feeds as its distribution coincided with the transportation route of the animal feeds. Liquidambar styraciflua is amenable to the ecological investigation on the possible expansion of the species to the nearby Naejang National Park as its leave shape and autumn color are very similar to those of maple trees. The number of naturalized plants around the RFT industrial complex will increase with an increase in floating population, in human activities in association with constructions of factories and operations of the complex. The result of this study provides baseline data for assessing the ecological change of the region according to the operation of the RFT industrial complex

Exotic plant species around Jeongeup Research Complex and RFT industrial complex

Energy Technology Data Exchange (ETDEWEB)

Kim, Jin Kyu; Cha, Min Kyoung; Ryu, Tae Ho; Lee, Yun Jong; Kim, Jin Hong [Advanced Radiation Technology Institute, Korea Atomic Energy Research Institute, Jeongeup(Korea, Republic of)

2015-08-15

In Shinjeong-dong of Jeongeup, there are three government-supported research institutes and an RFT industrial complex which is currently being established. Increased human activities can affect flora and fauna as a man-made pressure onto the region. As a baseline study, status of exotic plants was investigated prior to a full operation of the RFT industrial complex. A total of 54 species and 1 variety of naturalized or introduced plants were found in the study area. Among them, three species (Ambrosia artemisifolia var. elatior, Rumex acetocella and Aster pilosus) belong to 'nuisance species', and four species (Phytolacca americana, Iopomoea hederacea, Ereechtites hieracifolia and Rudbeckia laciniata) to ‘monitor species’ designated by the ministry of Environment. Some of naturalized trees and plants were intentionally introduced in this area, while others naturally immigrated. Physalis angulata seems to immigrate in the study area in the form of mixture with animal feeds as its distribution coincided with the transportation route of the animal feeds. Liquidambar styraciflua is amenable to the ecological investigation on the possible expansion of the species to the nearby Naejang National Park as its leave shape and autumn color are very similar to those of maple trees. The number of naturalized plants around the RFT industrial complex will increase with an increase in floating population, in human activities in association with constructions of factories and operations of the complex. The result of this study provides baseline data for assessing the ecological change of the region according to the operation of the RFT industrial complex.

Differences in the composition of organic impurities in ground and surface waters. Consequences for the preparation of boiler feed water

International Nuclear Information System (INIS)

Huber, S.A.

2002-01-01

It is generally accepted that current limits for total organic carbon (TOC) in the pharmaceutical industry (500 ppb) and semiconductor industry (10-25 ppb) should be regarded as precautionary measures and do not necessarily reflect true scientific evidence. For the power industry the situation is different. Here, recommended TOC-limits for boiler feed waters (in 1999: VGB: 200 ppb; EPRI: 100 ppb) are based on scientific and empirical data. The oxidation of, say, 50 ppb TOC to carbon dioxide in the water/steam cycle will increase steam condensate conductivity by 0.48 μ S /cm (values may depend on literature source, here [1]), a value which is not acceptable as it desensitizes the detection of leaks in cooling water heat exchangers. Apart from this indirect effect of TOC there is also evidence for direct negative effects of TOC on steel materials. Even small amounts of organic acids, which are produced as intermediates in the TOC oxidation process, may locally lower the pH down to levels [2] where erosion corrosion of boiler tubes can take place. It was also found that carbon is enriched in stress corrosion cracks of turbine materials [3]. The present paper will discuss the ''TOC-issue'' in boiler feed water preparation. Most of the results can be applied also to other industries, e.g. semiconductor, chemical or pharmaceutical. (authors)

Enhancing the Feed Capacity of Horticulture Agro-Ecosystem Through Technology for Goat Production

Directory of Open Access Journals (Sweden)

Simon P Ginting

2011-09-01

Full Text Available The availability of feed and their efficiency of use throughout the year represent the most important constraint affecting the productivity of animals in any agro-ecosystems. Beside being the largest contributor to the total production cost, logistically feeds need to be available on a daily basis across the animal’s life time. In order to be competitive, goat production system must be directed toward the optimum utilization of inconventional feedstuffs such as crop residues and agro-industrial by-products. The horticulture crops provide various crop-residues and by products from the processing of its main products. These biomass are potential feedstuffs that could be used to support the production of goats. The processing of passion fruits (Passiflora edulis yield by products such as fruit shells and seeds. These products are good energy and protein sources for growing goats. Oriental radish (Raphanus sativus by-products composed by damaged root parts and culls have high digestible energy and low ether extract content, but have very high moisture content. The pineapple by-products composed by the peel and bagasse of the fruit could be used as energy source for goats. Other horticulture by-products or residues such as citrus pulp, abandoned citrus fruit, forages from Ipomea batatas are of great potential as feeds for goat production. Preserving technology like ensiling could be implemented in utilising those biomass categorized as wet by-products such as pineapple and oriental radish by-products. The technology of complete feed is an effective means in utilizing some of those products with relatively low palatability or to increase its inclusion level in diets. Introducing shade-tolerant forage species as intercrops such as Stenotaphrum secundatum, Brachiaria humidicola and Arachis pintoi in the citrus plantation should increase feed capacity of the area. The multi-purpose trees such as Indigofera sp. and Calliandra calothyrsus both are

Factors influencing initiation of breast-feeding.

Science.gov (United States)

Ekwo, E E; Dusdieker, L B; Booth, B M

1983-04-01

We used the critical incidence method to study factors motivating 33 primigravidas and 39 multigravidas to initiate breast-feeding of their infants. Women chose breast-feeding because they believed that it would provide protection to the infant against infection, establish maternal-infant bonding, was convenient, provided better nutrition than cow's milk formula, was emotionally satisfying, and was the natural way to feed infants. The decision to breast-feed was made well in advance of pregnancy by primigravidas and shortly before pregnancy by multigravidas. Friends who had successfully nursed infants were as influential as immediate family members in influencing our study subjects in their decision to breast-feed. Prenatal counseling, though important, may not be the optimal period for motivating women to breast-feed.

Reduced risk HTGR concept for industrial heat application

International Nuclear Information System (INIS)

Boardman, C.E.; Lipps, A.J.

1982-01-01

The industrial process heat market has been identified as major market for the High Temperature Gas-Cooled Reactor (HTGR), however, this market introduces stringent availability requirements on the reactor system relative to electric plants which feed a large existing grid. The characteristics and requirements of the industrial heat markets are summarized; the risks associated with serving this market with a single large HTGR will be discussed; and the modular concept, which has the potential to reduce both safety and investment risks, will be described. The reference modular concept described consists of several small, relatively benign nuclear heat sources linked together to supply heat energy to a balance-of-plant incorporating a process gas train/thermochemical pipe line system and a normal steam-electric plant

Automatic liquid nitrogen feeding device

International Nuclear Information System (INIS)

Gillardeau, J.; Bona, F.; Dejachy, G.

1963-01-01

An automatic liquid nitrogen feeding device has been developed (and used) in the framework of corrosion tests realized with constantly renewed uranium hexafluoride. The issue was to feed liquid nitrogen to a large capacity metallic trap in order to condensate uranium hexafluoride at the exit of the corrosion chambers. After having studied various available devices, a feeding device has been specifically designed to be robust, secure and autonomous, as well as ensuring a high liquid nitrogen flowrate and a highly elevated feeding frequency. The device, made of standard material, has been used during 4000 hours without any problem [fr

Refining low protein modular feeds for children on low protein tube feeds with organic acidaemias.

Science.gov (United States)

Daly, A; Evans, S; Ashmore, C; Chahal, S; Santra, S; MacDonald, A

2017-12-01

Children with inherited metabolic disorders (IMD) who are dependent on tube feeding and require a protein restriction are commonly fed by 'modular tube feeds' consisting of several ingredients. A longitudinal, prospective two-phase study, conducted over 18 months assessed the long-term efficacy of a pre-measured protein-free composite feed. This was specifically designed to meet the non-protein nutritional requirements of children (aged over 1 year) with organic acidaemias on low protein enteral feeds and to be used as a supplement with an enteral feeding protein source. All non-protein individual feed ingredients were replaced with one protein-free composite feed supplying fat, carbohydrate, and micronutrients. Thirteen subjects, median age 7.4y (3-15.5y), all nutritionally tube dependent (supplying nutritional intake: ≥ 90%, n = 12; 75%, n = 1), and diagnosed with organic acidaemias (Propionic acidaemia, n = 6; Vitamin B 12 non-responsive methyl malonic acidaemia, n = 4; Isovaleric acidaemia, n = 2; Glutaric aciduria type1, n = 1); were studied. Nutritional intake, biochemistry and anthropometry were monitored at week - 8, 0, 12, 26 and 79. Energy intake remained unchanged, providing 76% of estimated energy requirements. Dietary intakes of vitamins, minerals and essential fatty acids significantly increased from week 0 to week 79, but sodium, potassium, magnesium, decosahexanoic acid and fibre did not meet suggested requirements. Plasma zinc, selenium, haemoglobin and MCV significantly improved, and growth remained satisfactory. Natural protein intake met WHO/FAO/UNU 2007 recommendations. A protein-free composite feed formulated to meet the non-protein nutritional requirements of children aged over 1 year improved nutritional intake, biochemical nutritional status, and simplified enteral tube feeding regimens in children with organic acidaemias.

Treatment of animal feeds with ionizing radiation. II. Effects of gamma radicidation on the biological value of poultry feed

International Nuclear Information System (INIS)

Adler, J.H.; Eisenberg, E.; Lapidot, M.; Tsir, D.

1978-01-01

Poultry is a major local meat source which is often contaminated with salmonella. A major source of contamination was found to be salmonella-infected poultry feed. Since gamma radiation at doses of up to 1 Mrad reduced salmonella populations in feed by 6 to 7 logs, this study was undertaken to determine if radicidized poultry feed can be used as a step in reducing contamination of poultry without affecting breeder flock performance and longevity. Two breeder flocks, each comprising 300 hens and 50 roosters, were kept in separate coops. One flock was fed untreated feed, while the feed of the other was radicidized at 1 Mrad, which resulted in a level of less than 10 enterobacteria per gram. The flocks were studied for over 12 months, from the emergence of chicks to the end of 6 months of egg production. The quantity of feed supply was controlled to ensure early detection of detrimental effects on the biological value of the feed. For the first 8 weeks, when the feed was freely supplied, no differences were observed in feed utilization or growth. After limited feeding was started, no significant differences were observed in feed utilization and in total amount of feed consumed. The number of fertile eggs, the feed consumption per egg, the age at which the first egg was laid, mortality and the total weight after 22 weeks and 12 1/4 months were practically equivalent in both flocks. Chicks obtained from both flocks showed no significant differences in weight or in feed utilization. (author)

The Performance and Incidence of Ascites in Broiler Chickens in Response to Feed Restriction and Meal Feeding Programs

Directory of Open Access Journals (Sweden)

Behrouz Dastar

2014-04-01

Full Text Available An experiment was conducted to evaluate the effect of feed restriction (FR and meal feeding (MF on performance, carcass characteristics and related parameters to ascites in Ross 308 male broiler chickens. Five dietary treatments were 1 the control (ad libo. feeding, 2 feed restriction from 7 to 14 days (FR14, 3 feed restriction from 7 to 21 days (FR21, 4 meal feeding from 7 to 14 days (MF14 and 5 meal feeding from 7 to 21days (MF21. All birds were fed adlibitum for the first week post hatch and after 21 days of age. Four replicate of 12 birds were allocated to each treatment. The results indicated FR and MF21 groups had significantly (p

Pilot-scale anaerobic co-digestion of sewage sludge with agro-industrial by-products for increased biogas production of existing digesters at wastewater treatment plants.

Science.gov (United States)

Maragkaki, A E; Fountoulakis, M; Gypakis, A; Kyriakou, A; Lasaridi, K; Manios, T

2017-01-01

Due to low degradability of dry solids, most of the digesters at wastewater treatment plants (WWTP) operate at low loading rates resulting in poor biogas yields. In this study, co-digestion of sewage sludge (SS) with olive mill wastewater (OMW), cheese whey (CW) and crude glycerol (CG) was studied in an attempt to improve biogas production of existing digesters at WWTPs. The effect of agro-industrial by-products in biogas production was investigated using a 220L pilot-scale (180L working volume) digester under mesophilic conditions (35°C) with a total feeding volume of 7.5L daily and a 24-day hydraulic retention time. The initial feed was sewage sludge and the bioreactor was operated using this feed for 40days. Each agro-industrial by-product was then added to the feed so that the reactor was fed continuously with 95% sewage sludge and 5% (v/v) of each examined agro-industrial by-product. The experiments showed that a 5% (v/v) addition of OMW, CG or CW to sewage sludge significantly increased biogas production by nearly 220%, 350% and 86% as values of 34.8±3.2L/d, 185.7±15.3L/d and 45.9±3.6L/d respectively, compared to that with sewage sludge alone (375ml daily, 5% v/v in the feed). The average removal of dissolved chemical oxygen demand (d-COD) ranged between 72 and 99% for organic loading rates between 0.9 and 1.5kgVSm -3 d -1 . Reduction in the volatile solids ranged between 25 and 40%. This work suggests that methane can be produced very efficiently by adding a small concentration (5%) of agro-industrial by-products and especially CG in the inlet of digesters treating sewage sludge. Copyright © 2016 Elsevier Ltd. All rights reserved.

Applications of the in vitro gas method in the evaluation of feed resources, and enhancement of nutritional value of tannin-rich tree/browse leaves and agro-industrial by-products

International Nuclear Information System (INIS)

Makkar, H.P.S.

2002-01-01

A major constraint to increasing livestock productivity in developing countries is the scarcity and fluctuating quantity and quality of the year-round supply of conventional feeds. In order to meet the projected high demand of livestock products, and to fulfil the future hopes of feeding the millions and safeguarding their food security, the better utilisation of non-conventional feed resources which do not compete with human food is imperative. There is also a need to identify and introduce new and lesser known food and feed crops capable of growing in poor soils, which can play a vital role in control of soil erosion, bring economic benefits to farmers, enhance biodiversity, create jobs and bridge the wide gap between supply and demand for animal feeds. This paper highlights the potential of a novel approach using an in vitro rumen fermentation technique for evaluation of nutritional quality of non-conventional feed resources; many of the considerations discussed also apply to conventional feeds. This technique enables selection of a feed for high efficiency of microbial protein synthesis in the rumen along with high dry matter digestibility, and provides a basis for development of feeding strategies to better synchronise energy and nutrient release to maximise substrate fixation into microbial cells. This could lead to increase in the supply of protein to intestine and reduce methane production from ruminants. Tannins are the most widely occurring anti-nutritional factor in non-conventional feeds. General approaches for detanninification and increasing nutritional value of tannin-rich feed resources are also discussed. (author)

Utilization of methane and reclaimed gases in the clay industry

Energy Technology Data Exchange (ETDEWEB)

Hole, W L

1983-03-01

The author first provides information on the supply of coke oven gas to industry by NCB (Coal Products) Ltd. Details are then given of the technique of methane drainage in coal mines, and the markets that have been found for colliery methane in the UK. In particular, the Carlton Main brick scheme is described. In North Staffordshire, five collieries feed into a 10-mile grid supplying a number of brick works in the area. The involvement of NCB (Coal Products) in the reclamation of methane from landfill refuse, and particularly the project at Aveley, Essex, is discussed. A number of markets, including those in the clay industry, are being considered.

Feeding Releases Endogenous Opioids in Humans.

Science.gov (United States)

Tuulari, Jetro J; Tuominen, Lauri; de Boer, Femke E; Hirvonen, Jussi; Helin, Semi; Nuutila, Pirjo; Nummenmaa, Lauri

2017-08-23

The endogenous opioid system supports a multitude of functions related to appetitive behavior in humans and animals, and it has been proposed to govern hedonic aspects of feeding thus contributing to the development of obesity. Here we used positron emission tomography to investigate whether feeding results in hedonia-dependent endogenous opioid release in humans. Ten healthy males were recruited for the study. They were scanned with the μ-opioid-specific ligand [ 11 C]carfentanil three times, as follows: after a palatable meal, a nonpalatable meal, and after an overnight fast. Subjective mood, satiety, and circulating hormone levels were measured. Feeding induced significant endogenous opioid release throughout the brain. This response was more pronounced following a nonpalatable meal versus a palatable meal, and independent of the subjective hedonic responses to feeding. We conclude that feeding consistently triggers cerebral opioid release even in the absence of subjective pleasure associated with feeding, suggesting that metabolic and homeostatic rather than exclusively hedonic responses play a role in the feeding-triggered cerebral opioid release. SIGNIFICANCE STATEMENT The endogenous opioid system supports both hedonic and homeostatic functions. It has been proposed that overeating and concomitant opioid release could downregulate opioid receptors and promote the development of obesity. However, it remains unresolved whether feeding leads to endogenous opioid release in humans. We used in vivo positron emission tomography to test whether feeding triggers cerebral opioid release and whether this response is associated with pleasurable sensations. We scanned volunteers using the μ-opioid receptor-specific radioligand [ 11 C]carfentanil three times, as follows: after an overnight fast, after consuming a palatable meal, and after consuming a nonpalatable meal. Feeding led to significant endogenous opioid release, and this occurred also in the absence of feeding

The performance of broilers on a feed depends on the feed protein ...

African Journals Online (AJOL)

User

liveweight, after which they were given one of two feed protein contents in ... Their performance was monitored until a second pre-defined liveweight was .... procedure ensured that all feeds contained the same amino acid balance. ... Keeping birds to 2500 g liveweight in cages led to some problems with leg weakness.

The effect of dietary garlic supplementation on body weight gain, feed intake, feed conversion efficiency, faecal score, faecal coliform count and feeding cost in crossbred dairy calves.

Science.gov (United States)

Ghosh, Sudipta; Mehla, Ram K; Sirohi, S K; Roy, Biswajit

2010-06-01

Thirty-six crossbred calves (Holstein cross) of 5 days of age were used to study the effect of garlic extract feeding on their performance up to the age of 2 months (pre-ruminant stage). They were randomly allotted into treatment and control groups (18 numbers in each group). Performance was evaluated by measuring average body weight (BW) gain, feed intake (dry matter (DM), total digestible nutrient (TDN) and crude protein (CP)), feed conversion efficiency (FCE; DM, TDN and CP), faecal score, faecal coliform count and feeding cost. Diets were the same for the both groups. In addition, treatment group received garlic extract supplementation at 250 mg/kg BW per day per calf. Body weight measured weekly, feed intake measured twice daily, proximate analysis of feeds and fodders analysed weekly, faecal scores monitored daily and faecal coliform count done weekly. There was significant increase in average body weight gain, feed intake and FCE and significant decrease in severity of scours as measured by faecal score and faecal coliform count in the treatment group compared to the control group (P Feed cost per kilogramme BW gain was significantly lower in the treatment group compared to control group (P calves for better performance.

21 CFR 510.305 - Maintenance of copies of approved medicated feed mill licenses to manufacture animal feed bearing...

Science.gov (United States)

2010-04-01

... mill licenses to manufacture animal feed bearing or containing new animal drugs. 510.305 Section 510... copies of approved medicated feed mill licenses to manufacture animal feed bearing or containing new... medicated feed mill license (Form FDA 3448) on the premises of the manufacturing establishment; and (b...

Tread-water feeding of Bryde's whales.

Science.gov (United States)

Iwata, Takashi; Akamatsu, Tomonari; Thongsukdee, Surasak; Cherdsukjai, Phaothep; Adulyanukosol, Kanjana; Sato, Katsufumi

2017-11-06

Many previous studies have shown that rorqual whales (Balaenopteridae), including the blue whale (Balaenoptera musculus), fin whale (B. physalus), sei whale (B. borealis), Bryde's whale (B. edeni), minke whale (B. acutorostrata), and humpback whale (Megaptera novaeangliae), employ a strategy called lunge feeding to capture a large amount of krill and/or fish for nourishment [1]. Lunge feeding entails a high energetic cost due to the drag created by an open mouth at high speeds [1,2]. In the upper Gulf of Thailand, Bryde's whales, which feed on small fish species [3], predominantly anchovies, demonstrated a range of feeding behaviors such as oblique, vertical, and lateral lunging. Moreover, they displayed a novel head-lifting feeding behavior characterized by holding the vertical posture for several seconds with an open mouth at the water surface. This study describes the head-lifting feeding by Bryde's whales, which is distinct from the typical lunge feeding of rorqual whales. Whales showing this behavior were observed on 58 occasions, involving 31 whales and including eight adult-calf pairs. Whales caught their prey using a series of coordinated movements: (i) lifting the head above the water with a closed mouth, (ii) opening the mouth until the lower jaw contacted the sea surface, which created a current of water flowing into the mouth, (iii) holding their position for several seconds, (iv) waiting for the prey to enter the mouth, and (v) closing the mouth and engulfing the prey underwater (Figure 1A-F, Movie S1 in Supplemental Information published with this article online). When a whale kept its upper jaw above the sea surface, many anchovies in the targeted shoal appeared to lose orientation and flowed passively into the mouth of the whale by the current created by the lower mandible breaking the surface of the water. We measured the duration of feeding events when the whales had a wide-open mouth mostly above the sea surface. The mean and maximum feeding

Mechatronics Approach for a Controlled Actuation of the Presser Foot Mechanism on an Industrial Sewing Machine

Directory of Open Access Journals (Sweden)

L. F. Silva

2000-01-01

Full Text Available This paper describes the study of the research program being carried out on the feeding system of an industrial overlock sewing machine. The results obtained from the presser foot bar displacement and compression force, together with the graphic kinematic analysis, which includes the velocity and acceleration taken from the displacement-time curves of the presser bar, led to further understanding of the feeding system dynamics. This study is providing the basis for the development of a redesigned and optimized fabric feeding system. The new actuation system, based on a proportional force solenoid integrated in the presser foot bar, will be also discussed as an important contribution to achieving a desired dynamic behaviour at high sewing speeds.

Application of ''Confirm tank T is an appropriate feed source for High-Level waste feed batch X'' to specific feed batches

International Nuclear Information System (INIS)

JO, J.

1999-01-01

This document addresses the characterization needs of tanks as set forth in the Data Quality Objectives for TWRS Privatization Phase I: Confirm Tank T is an Appropriate Feed Source for High-Level Waste Feed Batch X (Crawford et al. 1998). The primary purpose of this document is to collect existing data and identify the data needed to determine whether or not the feed source(s) are appropriate for a specific batch. To answer these questions, the existing tank data must be collected and a detailed review performed. If the existing data are insufficient to complete a full comparison, additional data must be obtained from the feed source(s). Additional information requirements need to be identified and formally documented, then the source tank waste must be sampled or resampled and analyzed. Once the additional data are obtained, the data shall be incorporated into the existing database for the source tank and a reevaluation of the data against the Data Quality Objective (DQO) must be made

ENERGY SAVING RESERVES IN THE PRODUCTION OF FEED ADDITIVES WITH THE SPECIFIED GRANULOMETRIC COMPOSITION

Directory of Open Access Journals (Sweden)

A. A. Shevtsov

2015-01-01

Full Text Available Due to the growing need to substitute expensive foreign-made feed products need for expanding food resources in the Russian market appears. The disadvantages of existing technological lines for the preparation of mineral feed additives are high specific energy consumption, low economic efficiency and inadequate conditions for environmental safety insuring. That is why energy-efficient production method for the feed additive based on zeolite and a technological line for its realization was developed at the Department of Technology of bread, pastry, pasta and grain processing industries in VSUET. Application of refrigeration unit operating in heat pump mode allows preparation of heat transfer agents with a maximum utilization of secondary heat sources. After drying the spent drying agent is fed to the preheating methioninate copper suspension through the regenerative heat exchange, then to the dehumidification into the evaporator of refrigeration unit and then it is returned to the first section of the two-part condenser in closed-loop mode. Feed fat is heated to 55 ... 60 ° C, by "hot water", heating of which takes place in the second section of the 11th condenser to the temperature of 70 ... 75 ° C and is fed into the jacket of fat melting device. Then it is returned to the second capacitor section to form a recirculation loop. We developed a feed additive with the following particle size distribution: a large fraction of 2.8%, the average fraction of 95.2%, the fine fraction of 2.0%, the residue on the sieve with a mesh № 1,2 of 2,0%, with a moisture content of 6.2%, the angle of repose of 42 deg., dispersibility of 6.9%, a bulk density of 385 kg / m3. The proposed method for the production of the feed additive based on zeolite ensures environmental safety of production due to closed recirculation circuits on material and energy flows, helps to reduce energy and resource consumption for the production of the feed additive, to obtain high

Engineer Medium and Feed for Modulating N-Glycosylation of Recombinant Protein Production in CHO Cell Culture.

Science.gov (United States)

Fan, Yuzhou; Kildegaard, Helene Faustrup; Andersen, Mikael Rørdam

2017-01-01

Chinese hamster ovary (CHO) cells have become the primary expression system for the production of complex recombinant proteins due to their long-term success in industrial scale production and generating appropriate protein N-glycans similar to that of humans. Control and optimization of protein N-glycosylation is crucial, as the structure of N-glycans can largely influence both biological and physicochemical properties of recombinant proteins. Protein N-glycosylation in CHO cell culture can be controlled and tuned by engineering medium, feed, culture process, as well as genetic elements of the cell. In this chapter, we will focus on how to carry out experiments for N-glycosylation modulation through medium and feed optimization. The workflow and typical methods involved in the experiment process will be presented.

Rumen fermentation dynamics of concentrate containing the new feed supplement

International Nuclear Information System (INIS)

Suharyono; Shintia NW Hardani; Teguh Wahyono

2015-01-01

The utilization of "3"2P for measuring of microbial protein synthesis in rumen liquid has potential role for obtaining a new formula of feed supplement (SPB). New Feed Supplements (SPB) was a new generation of ruminant feed supplement produced by the National Nuclear Energy Agency (BATAN). This supplement was applied to complete commercial concentrate function as feed for ruminants. In vitro testing used semi continuous in vitro such as Rumen Simulation Technique (RUSITEC). The purpose of this study was to evaluate SPB as feed supplement and palm oil industry by product, and also to determine the dynamics of rumen fermentation from concentrate containing SPB. Two in vitro's analyzes that have been studied were "3"2P incubation and RUSITEC's methods. "3"2P in vitro's study used five treatments: palm oil leaf (P), palm oil bunches (TKS), Palm oil shell kernel (KC), P+TKS+KC and SPB. Parameter's measurement was microbial protein synthesis (mg/h/l). RUSITEC treatments were: control (K) (commercial concentrate); KS 30 (70 % commercial concentrate + 30 % SPB) and KS 40 (60 % commercial concentrate + 40 % SPB). Observed variables were fermented rumen product (24 hours incubation) such as pH, ammonia concentration (NH_3) (mg/100 ml), total volatile fatty acid (TVFA) (mM), total gas production (ml/d) and methane production (CH_4) (ml/d). Rumen fermentation dynamics represented descriptively on six days incubation. The average variable was analyzed using completely randomized design with 12 replicates (six days incubation x two replications) followed by Duncan test. Highest microbial protein synthesis was on SPB compared with P, TKS, KC and P+TKS+KC (67.6 vs 11.9; 0,67; 1,87 and 42.55 mg/h/l respectively). The RUSITEC results were pH value of three treatments in normal range between 6.40 to 7.15. The dynamics of NH_3 concentration and TVFA production of commercial concentrates always lower than the KS 30 and KS 40. The KS 40 treatment resulted in TVFA production 56

The influence of supplemented Curcuma in feed formulation to improve growth rate and feed efficiency of catfish (Clarias sp.)

Science.gov (United States)

Ulum, M. M.; Zubaidah, M.; Arief, M.; Prayogo

2018-04-01

Catfish (Clarias sp.) is very potential to be developed as a food fish. The use of the feed additive in feed intended to improve the health, productivity and compliance with animal nutrition. Feed additive is to use ginger are derived from nature.The purpose of this study was to determine the potential increase in feed formulation. The Curcuma effect on growth rate and feed efficiency of catfish (Clarias sp.). The method used experimental methods and design complete random with 4 treatments and 5 replications. The parameters examined in this study aregrowth rate and efficiency feed.The research showed that the ANOVA markedly dissimilar ( Padditive on formulations feed.

Weather influences feed intake and feed efficiency in a temperate climate.

Science.gov (United States)

Hill, Davina L; Wall, Eileen

2017-03-01

A key goal for livestock science is to ensure that food production meets the needs of an increasing global population. Climate change may heighten this challenge through increases in mean temperatures and in the intensity, duration, and spatial distribution of extreme weather events, such as heat waves. Under high ambient temperatures, livestock are expected to decrease dry matter intake (DMI) to reduce their metabolic heat production. High yielding dairy cows require high DMI to support their levels of milk production, but this may increase susceptibility to heat stress. Here, we tested how feed intake and the rate of converting dry matter to milk (feed efficiency, FE) vary in response to natural fluctuations in weather conditions in a housed experimental herd of lactating Holstein Friesians in the United Kingdom. Cows belonged to 2 lines: those selected for high genetic merit for milk traits (select) and those at the UK average (control). We predicted that (1) feed intake and FE would vary with an index of temperature and humidity (THI), wind speed, and the number of hours of sunshine, and that (2) the effects of (1) would depend on the cows' genetic merit. Animals received a mixed ration, available ad libitum, from automatic feed measurement gates. Using >73,000 daily feed intake and FE records from 328 cows over 8 yr, we found that select cows produced more fat- and protein-corrected milk, and had higher DMI and FE than controls. Cows of both lines decreased DMI and fat- and protein-corrected milk but, importantly, increased FE as THI increased. This suggests that improvements in the efficiency of converting feed to milk may partially offset the costs of reduced milk yield owing to a warmer climate, at least under conditions of mild heat stress. The rate of increase in FE with THI was steeper in select cows than in controls, which raises the possibility that select cows use more effective coping tactics. This is, to our knowledge, the first longitudinal study

Fermented liquid feed - Feed processing has a big impact on microbial degradation of free lysine during fermentation

DEFF Research Database (Denmark)

Canibe, Nuria; Jensen, Bent Borg

2010-01-01

In order to investigate the influence of feed processing on the microbial degradation of free lysine during fermentation of liquid feed, a study at laboratory scale was carried out. Based on a standard Danish grower diet with extra free amino acids added, two treatments were prepared: treatment 1...... a few hours of fermentation, the levels in both treatments became similar. The concentration of acetic acid was higher in the mixture containing the mash feed than in that containing the pelleted feed. The disappearance of free lysine was much higher when mash feed was fermented than when the same...

Practical Recommendations on Supplemental Feeding Introduction

Directory of Open Access Journals (Sweden)

S. G. Makarova

2015-01-01

Full Text Available Despite the availability of a national consensus document describing in detail modern approaches to feeding infants, pediatricians keep on giving most diverse recommendations on the time of supplemental feeding introduction. The article presents a brief historical review, as well the modern view on the issue of introduction of supplemental feeding to children. In the previous century, it was common both in Russia and most European countries to introduce supplemental feeding to children at the age of 2 or even 1.5 months. In 2002, the World Health Organization put forward an initiative in support of breastfeeding and recommended not to introduce supplemental feeding before the age of 6 months. A certain “golden mean” has apparently been achieved on the basis of results of studies and a longterm discussion among the specialists in feeding from different countries — all scientific communities and national recommendations of most countries define the optimal age for supplemental feeding introduction as “from 4 (completed months to 6 (completed months” with certain individual approach. 

Relation of parenting styles, feeding styles and feeding practices to child overweight and obesity. Direct and moderated effects.

Science.gov (United States)

Hubbs-Tait, Laura; Dickin, Katherine L; Sigman-Grant, Madeleine; Jahns, Lisa; Mobley, Amy R

2013-12-01

The purpose of this study was to evaluate the direct and interacting relations of parenting styles, feeding styles, and feeding practices to child overweight and obesity. Participants were 144 mothers and children under 6 years of age. Mothers completed questionnaires about parenting and feeding styles and feeding practices. Researchers weighed and measured mothers and children or obtained measurements from a recent health report. Feeding practices were not directly related to child weight status. Compared to the uninvolved feeding style, authoritative and authoritarian feeding style categories were linked to lower odds of overweight. Feeding practices interacted with authoritative and authoritarian parenting styles to predict obesity: (1) healthful modeling was associated with 61% (OR = 0.39) reduced odds of obesity in children of authoritative mothers but with 55% (OR = 1.55) increased odds in children of non-authoritative mothers and (2) covert control was linked to 156% (OR = 2.56) increased odds of obesity in children of authoritarian mothers but with 51% (OR = 0.49) decreased odds in children of non-authoritarian mothers. Healthful modeling interacted with feeding style demandingness to predict overweight and with responsiveness to predict obesity. Findings suggest the need for research and interventions on mechanisms mediating between feeding practices and obesity in families characterized by non-authoritative parenting styles. Copyright © 2013 The Authors. Published by Elsevier Ltd.. All rights reserved.

The performance of broilers on a feed depends on the feed protein ...

African Journals Online (AJOL)

Birds were initially offered one of two feeds with widely different protein to energy ratios until they reached a pre-defined liveweight, after which they were given one of two feed protein contents in Experiment 1 and four in Experiment 2. Their performance was monitored until a second pre-defined liveweight was reached, ...

Regulatory aspects of nanotechnology in the agri/feed/food sector in EU and non-EU countries.

Science.gov (United States)

Amenta, Valeria; Aschberger, Karin; Arena, Maria; Bouwmeester, Hans; Botelho Moniz, Filipa; Brandhoff, Puck; Gottardo, Stefania; Marvin, Hans J P; Mech, Agnieszka; Quiros Pesudo, Laia; Rauscher, Hubert; Schoonjans, Reinhilde; Vettori, Maria Vittoria; Weigel, Stefan; Peters, Ruud J

2015-10-01

Nanotechnology has the potential to innovate the agricultural, feed and food sectors (hereinafter referred to as agri/feed/food). Applications that are marketed already include nano-encapsulated agrochemicals or nutrients, antimicrobial nanoparticles and active and intelligent food packaging. Many nano-enabled products are currently under research and development, and may enter the market in the near future. As for any other regulated product, applicants applying for market approval have to demonstrate the safe use of such new products without posing undue safety risks to the consumer and the environment. Several countries all over the world have been active in examining the appropriateness of their regulatory frameworks for dealing with nanotechnologies. As a consequence of this, different approaches have been taken in regulating nano-based products in agri/feed/food. The EU, along with Switzerland, were identified to be the only world region where nano-specific provisions have been incorporated in existing legislation, while in other regions nanomaterials are regulated more implicitly by mainly building on guidance for industry. This paper presents an overview and discusses the state of the art of different regulatory measures for nanomaterials in agri/feed/food, including legislation and guidance for safety assessment in EU and non-EU countries. Copyright © 2015 The Authors. Published by Elsevier Inc. All rights reserved.

Health, body condition and blood metabolites in reindeer after submaintenance feed intake and subsequent feeding

Directory of Open Access Journals (Sweden)

A. Nilsson

2000-03-01

Full Text Available The transition from experimentally induced poor nutritional conditions to feeding was studied with 69 eight-month-old female reindeer (Rangifer tarandus tarandus. During a pre-experimental period, all reindeer were fed a simulated winter diet with 80% lichens Cladina spp. and 20% Vaccinum myrtillus shrubs and Salix spp. leaves (lichen diet ad lib. The reindeer were divided into five groups. A control group (group C was fed the lichen diet ad lib. throughout the experiment. Four groups were fed half of that ration for eight days and were then totally deprived of feed for one day (restriction period. During the following 34 days (feeding period the groups were re-fed the lichen diet (group L, fed pelleted reindeer feed combined with either lichen (group PL or grass silage (group PS, or fed silage with a gradually increasing addition of pellets (group SP. Weekly measurements of blood samples and body weighr showed that the control group remained clinically healthy and had stable blood plasma concentrations of protein, urea, glucose and insulin throughout the experiment, but they lost weight. At slaughter, before and after the restriction period, all animals had lost rumen-free body weight, but the reindeer fed a restricted amount of feed lost more than the control group. Also the plasma metabolites were affected by the restricted feeding, with increased concentrations of urea and decreased concentrations of glucose. Group L responded immediately to the ad lib. feeding with blood metabolite levels rapidly approaching those of group C. The body weight developments were similar in groups L and C. Although the feed rations were increased gradually, diarrhoea occurred in some animals belonging to groups PL and PS within the first week of the feeding period. All reindeer recovered, after antibiotic treatment of the worst affected animals. The PL and PS groups, which had high contents of metabolisable energy and crude protein in their diets, showed

Microbial keratinases: industrial enzymes with waste management potential.

Science.gov (United States)

Verma, Amit; Singh, Hukum; Anwar, Shahbaz; Chattopadhyay, Anirudha; Tiwari, Kapil K; Kaur, Surinder; Dhilon, Gurpreet Singh

2017-06-01

Proteases are ubiquitous enzymes that occur in various biological systems ranging from microorganisms to higher organisms. Microbial proteases are largely utilized in various established industrial processes. Despite their numerous industrial applications, they are not efficient in hydrolysis of recalcitrant, protein-rich keratinous wastes which result in environmental pollution and health hazards. This paved the way for the search of keratinolytic microorganisms having the ability to hydrolyze "hard to degrade" keratinous wastes. This new class of proteases is known as "keratinases". Due to their specificity, keratinases have an advantage over normal proteases and have replaced them in many industrial applications, such as nematicidal agents, nitrogenous fertilizer production from keratinous waste, animal feed and biofuel production. Keratinases have also replaced the normal proteases in the leather industry and detergent additive application due to their better performance. They have also been proved efficient in prion protein degradation. Above all, one of the major hurdles of enzyme industrial applications (cost effective production) can be achieved by using keratinous waste biomass, such as chicken feathers and hairs as fermentation substrate. Use of these low cost waste materials serves dual purposes: to reduce the fermentation cost for enzyme production as well as reducing the environmental waste load. The advent of keratinases has given new direction for waste management with industrial applications giving rise to green technology for sustainable development.

Plant Secondary Compounds in Small Ruminant Feeding

DEFF Research Database (Denmark)

Gravador, Rufielyn Sungcaya

to the utilization of cheaper resources as alternatives to reduce the production cost. Here, locally available materials and agro-industrial by-products commonly found in the Mediterranean countries (citrus pulp, carob pulp, and olive cake) were used in feeding trials with lambs and the effects on meat quality were...... evaluated. These plant-derived materials contain considerable amounts of secondary bioactive metabolites, which affect the fatty acid composition and/or act as antioxidants. Hence, it was hypothesized that at appropriate levels of inclusion in to the lamb diets, these feedstuffs would not negatively affect...... animal health and productivity, and would represent a strategy to naturally produce a healthy and oxidatively stable meat. In the first study (Experiment 1), Comisana male lambs were fed for 60 days: a conventional cereal-based concentrate diet, or concentrates in which 24% or 35% dried citrus pulp...

Suborbital industry at the edge of space

CERN Document Server

Seedhouse, Erik

2014-01-01

Until recently, spaceflight has been the providence of a select corps of astronauts whose missions, in common with all remarkable exploits, were experienced vicariously by the rest of the world via television reports and Internet feeds. These spacefarers risked their lives in the name of science, exploration and adventure, thanks to government-funded manned spaceflight programs. All that is about to change The nascent commercial suborbital spaceflight industry will soon open the space frontier to commercial astronauts, payload specialists and, of course, spaceflight participants. Suborbital explains the tantalizing science opportunities offered when suborbital trips become routine and describes the difference in training and qualification necessary to become either a spaceflight participant or a fully fledged commercial suborbital astronaut. Suborbital also explains how the commercial suborbital spaceflight industry is planning and preparing for the challenges of marketing the hiring of astronauts. It examine...

Infant feeding practices in Malaysia.

Science.gov (United States)

Chen, S T

1978-12-01

Retrospective nutritional data on 100 children, aged 6 months to 2 1/2 years, who were admitted to the University Hospital in Kuala Lumpur, Malaysia, was obtained by interviewing the mothers of the children. Analysis of the data revealed that 1) only 49% of the children were breast-fed as infants; 2) 50% of the mothers who did breast-feed discontinued breast-feeding before the children were 3 months old; and 3) the weaning diet of at least 1/3 of the children was inadequate. 18% of the children were Malays, 49% were Chinese, and 33% were Indian. The proportion of breast-fed children was highest among the Malays and lowest among the Chinese. Mothers with higher incomes tended to stop breast-feeding earlier than mothers with lower incomes. 67% of the women said they stopped breast-feeding due to inadequate lactation. Most of the children received supplementary foods at relatively early ages. 50% of the infants received starchy foods by the time they were 3 1/2 months old, and 50% received fruit or fruit juice by the time they were 3 1/2 months old. Vegetable products, meat, fish, and eggs were not added to the diet until the children were considerably older. Recommendations, based on the study findings, were 1) hospitals should discontinue the practice of deferring breast-feeding initiation for 24 hours after delivery; 2) mothers should be encouraged to breast-feed fully; and 3) health personnel should discourage the widespread use of costly precooked cereals for supplementary feeding. Tables depicted 1) the frequency distribution of the 100 children by income and by milk feeding patterns according to ethnic affiliation and 2) the cost of serving precooked cereals as compared to the cost of serving home cooked meals.

A new on-belt elemental analyzer for the cement industry

International Nuclear Information System (INIS)

Sowerby, B.D.; Lim, C.S.; Tickner, J.R.; Manias, C.; Retallack, D.

2001-01-01

On-line control of raw mill feed composition is a key to the improved control of cement plants. Elements of primary importance to the industry are calcium, silicon, aluminum and iron. Direct on-conveyor belt analysis of raw mill feed is required, independent of changes in belt loading, moisture content, and both horizontal and vertical segregation. A new and improved on-conveyor belt elemental analyzer for cement raw mill feed has been developed and tested successfully in Adelaide Brighton's Birkenhead cement plant. The analyzer utilizes two 241 Am-Be neutron sources and multiple BGO detectors to measure both neutron inelastic scatter and thermal neutron capture gamma rays. Dynamic tests in the plant on highly segregated material having depths in the range 100 to 200 mm have shown analyzer total RMS errors of 0.49, 0.52, 0.38 and 0.23 wt.% (on a loss free basis) for CaO, SiO 2 , Al 2 O 3 , and Fe 2 O 3 respectively, when 10-minute counting periods are used

Esterilização de farinha de subprodutos animais em esterilizador industrial Industrial sterilization of animal meal

Directory of Open Access Journals (Sweden)

Marcio Antônio Mazutti

2010-03-01

products are used to correct nutritional deficiencies of other foodstuffs used in animal feed, such as vegetable feeds. However, animal meal is a good source for microorganism growth during processing or storage. A government regulation proposes that a stage of feed sterilization could be carried out before cooking the animal byproducts (offal, feathers, etc. or even of the meal itself, considering that if direct saturated steam is used, the minimum temperature should be 133 °C, for a minimum of 20 minutes, or if dry heat is used the meal should be exposed to a dry heat of 140 °C for a minimum of 3 hours. In industry, a final product that meets both the sanitary standards and high protein content is required. In this context, this work aimed to study different strategies for processing meal prepared from byproducts of poultry slaughterhouses, searching for the most effective technique for sterilization: whether pre-digestion or sterilization of the meal itself. Industrial (3,000 kg and pilot (150 kg plant tests were carried out. Sterilization on an industrial scale presented a better performance than the pilot plant tests. Protein content increased in all tests and the final digestibility of the meal was approximately 92 per cent, which increases its final market value. The industrial process was effective removing microorganisms, since no count was detected in the meal after any of the tests.

The Hungry Worm Feeds the Bird

NARCIS (Netherlands)

Onrust, J.; Piersma, T.

2017-01-01

Earthworms (Lumbricidae) are important prey for many birds. Based on theirown feeding ecology, earthworms can be separated into two ecotypes: the detritivoresthat feed on organic material and the geophages that feed on soil particlesand organic matter. Detritivores collect their food on the surface

7 CFR 205.237 - Livestock feed.

Science.gov (United States)

2010-01-01

..., Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) ORGANIC FOODS PRODUCTION ACT PROVISIONS NATIONAL ORGANIC PROGRAM Organic Production and Handling Requirements § 205.237 Livestock feed. (a... specific stage of life; (3) Feed plastic pellets for roughage; (4) Feed formulas containing urea or manure...

Transition from tube feeding to oral feeding: experience in a tertiary care paediatric cardiology unit.

Science.gov (United States)

Shine, Anne Marie; Finn, Daragh Gerard; Allen, Noeleen; McMahon, Colin J

2018-05-02

Home enteral tube feeding (HETF) is imperative for many infants and children with congenital heart disease (CHD). Tube weaning (TW) facilitates the progression from tube feeding to oral diet. There is limited literature on TW practices, protocols and success for children with CHD that have been tube fed. The objective of this study is to assess the process of weaning HETF in a tertiary referral centre for paediatric CHD. Specifically, we aimed to assess the duration of HETF, duration of TW and the interventions involved. We retrospectively reviewed the medical and dietetic records of all infants and children that were successfully weaned off HETF over a 12-month period from January 2015 to December 2015. There were 30 children included in the study, 9 boys and 21 girls. The diagnoses included 15 septal defects, 8 univentricular diagnosis and other diagnoses in 7 children. The median age at initiation of enteral tube feeding was 45 days (range 2-169). The median duration to wean from enteral tube feeding was 52 days (range 2-359). Number of dietetic consults required for successful TW varied among patients, median 5 (range 2-23). The number of days required for successful TW was associated with age and duration on HETF. Dietetic interventions included discontinuation of nutrient dense feeds, altering feed schedule and reduction of feed volume. Weaning HETF is possible in the outpatient setting. Early and frequent dietetic intervention is recommended to ensure prompt discontinuation of HETF when appropriate.

Does breast-feeding influence liver biochemistry?

DEFF Research Database (Denmark)

Jørgensen, M. H.; Ott, P.; Juul, A.

2003-01-01

It is assumed that early feeding can affect liver biochemistry because breast-fed infants have a higher risk of hyperbilirubinemia than formula-fed infants. The authors sought to determine how feeding mode affected liver biochemistry in healthy term infants.......It is assumed that early feeding can affect liver biochemistry because breast-fed infants have a higher risk of hyperbilirubinemia than formula-fed infants. The authors sought to determine how feeding mode affected liver biochemistry in healthy term infants....

Cost and optimal feed-in tariff for small scale photovoltaic systems in China

International Nuclear Information System (INIS)

Rigter, Jasper; Vidican, Georgeta

2010-01-01

China has recently become a dominant player in the solar photovoltaic (PV) industry, producing more than one-third of the global supply of solar cells in 2008. However, as of 2008, less than 1% of global installations were based in China. Recently, the government has stated its grand ambitions of expanding the share of electricity derived from solar power. As part of this initiative, policy makers are currently in the process of drafting a feed-in tariff policy to support the development of the solar energy market. In this paper, we aim to calculate what the level of such a tariff should be. We develop a closed form equation for the cost of PV, and use forecasts on prices of solar systems to derive an optimal feed-in tariff, including a digression rate. The focus is on the potential of residential and small scale commercial solar PV installations. We show that the cost of small scale PV in China has decreased rapidly during the period 2005-2009. Our analysis also shows that optimal feed-in tariffs vary widely between regions within China, and that grid parity could be reached in large parts of the country depending on the expected escalation in electricity prices. (author)

Invited review: Sustainable forage and grain crop production for the US dairy industry.

Science.gov (United States)

Martin, N P; Russelle, M P; Powell, J M; Sniffen, C J; Smith, S I; Tricarico, J M; Grant, R J

2017-12-01

A resilient US dairy industry will be underpinned by forage and crop production systems that are economically, environmentally, and socially sustainable. Land use for production of perennial and annual forages and grains for dairy cattle must evolve in response to multiple food security and environmental sustainability issues. These include increasing global populations; higher incomes and demand for dairy and other animal products; climate change with associated temperature and moisture changes; necessary reductions in carbon and water footprints; maintenance of soil quality and soil nutrient concerns; and competition for land. Likewise, maintaining producer profitability and utilizing practices accepted by consumers and society generally must also be considered. Predicted changes in climate and water availability will likely challenge current feed and dairy production systems and their national spatial distribution, particularly the western migration of dairy production in the late 20th century. To maintain and stabilize profitability while reducing carbon footprint, particularly reductions in methane emission and enhancements in soil carbon sequestration, dairy production will need to capitalize on genetic and management innovations that enhance forage and grain production and nutritive value. Improved regional and on-farm integration of feed production and manure utilization is needed to reduce environmental nitrogen and phosphorus losses and mitigate greenhouse gas emissions. Resilient and flexible feed production strategies are needed to address each of these challenges and opportunities to ensure profitable feeding of dairy cattle and a sustainable dairy industry. The Authors. Published by the Federation of Animal Science Societies and Elsevier Inc. on behalf of the American Dairy Science Association®. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/3.0/).

Metallurgical engineering and inspection practices in the chemical process industries

International Nuclear Information System (INIS)

Moller, G.E.

1987-01-01

The process industries, in particular the petroleum refining industry, adopted materials engineering and inspection (ME and I) practices years ago and regularly updated them because they were faced with the handling and refining of flammable, toxic, and corrosive feed stocks. These industries have a number of nonproprietary techniques and procedures, some of which may be applicable in the nuclear power generation field. Some specific inspection and engineering techniques used by the process industries within the framework of the guidelines for inspections and worthy of detailed description include the following: (1) sentry drilling or safety drilling of piping subject to relatively uniform corrosion, such as feedwater heater piping, steam piping, and extraction steam piping; (2) on-stream radiography for thickness measurement and detection of unusual conditions - damaged equipment such as valve blockage; (3) critical analysis of the chemical and refining processes for the relative probability of corrosion; (4) communication of valuable experience within the industry; (5) on-stream ultrasonic thickness testing; and (6) on-stream and off-stream crack and flaw detection. The author, trained in the petroleum refining industry but versed in electric utilities, pulp and paper, chemical process, marine, mining, water handling, waste treatment, and geothermal processes, discusses individual practices of these various industries in the paper

Industrial application of model predictive control to a milk powder spray drying plant

DEFF Research Database (Denmark)

Petersen, Lars Norbert; Poulsen, Niels Kjølstad; Niemann, Hans Henrik

2016-01-01

In this paper, we present our first results from an industrial application of model predictive control (MPC) with real-time steady-state target optimization (RTO) for control of an industrial spray dryer that produces enriched milk powder. The MPC algorithm is based on a continuous-time transfer...... provides significantly better control of the residual moisture content, increases the throughput and decreases the energy consumption compared to conventional PI-control. The MPC operates the spray dryer closer to the residual moisture constraint of the powder product. Thus, the same amount of feed...

Feed, energy and protein intakes of horses - A review of Finnish feeding trials

Directory of Open Access Journals (Sweden)

Markku Saastamoinen

1993-01-01

Full Text Available The aim of this study was to evaluate the feed, energy and protein intakes of horses engaged in different performances by reviewing results and data concerning feed consumption in 17 feeding trials with a total 356 horses, conducted between 1972 and 1992. The dry matter intake was found to average 1.6-1.8% of body weight for working horses and pregnant mares, and 2-3.5% for lactating mares. According to the results most of the exercising horses could be fed with energy and protein amounts currently recommended for moderate work. In Standardbred trotters, the average energy intake corresponded to the current requirements for light work. The individual variation in energy consumption among horses engaged in work of the same intensity was considerable, and seemed to be larger for Finnhorses than for warmblooded horses. The establishment of new nutrient requirements and feeding recommendations separately for trotters and riding horses of these two breeds, i.e. Finnhorses and warmblooded horses, seems justified.

Determination of α-tocopherol by reversed-phase HPLC in feed and animal-derived foods without saponification.

Science.gov (United States)

Claeys, Erik; Vossen, Els; De Smet, Stefaan

2016-01-30

The analysis of α-tocopherol in feed and animal-derived foods usually involves a saponification step. However, since saponification often leads to losses of α-tocopherol, a method for the determination of α-tocopherol in feed and in animal-derived foods was developed without a saponification step. In this method, α-tocopherol is extracted with hot ethanol and the co-extracted fat is removed by centrifugation. Removal of the fat fraction is made possible by the addition of water, to achieve an ethanol:water ratio of 40:7, followed by cooling on ice before centrifugation. This procedure allows removal of the fat fraction, while α-tocopherol is retained. Matrices differing in gross composition and α-tocopherol content were analyzed: fresh pork, cooked ham, subcutaneous fat, liver, egg yolk, milk and a compound pig feed. Higher α-tocopherol concentrations were found for this novel method compared to a conventional method with saponification, particularly for subcutaneous fat (P saponification method (66-90%; for subcutaneous fat saponification results in higher extraction yields and recoveries compared to the saponification method. © 2015 Society of Chemical Industry.

Non-protein and agro-industrial by-products utilization by ruminants in Bangladesh

International Nuclear Information System (INIS)

Tareque, A.M.M.

1987-01-01

A series of experiments were designed to (1) investigate mixtures of locally available feedstuffs, particularly agro-industrial by-products with or without non-protein nitrogen supplementation as production rations for local and imported breeds of ruminants, (2) formulate rations based on locally available feedstuffs which can be compounded either on a large scale or at the village level for local animals, (3) determine the nutritive value of some non-conventional feedstuffs in terms of their digestibility and their ability to promote microbial synthesis. Rice straw, constituting about 85% of the total available feed dry matter in Bangladesh, is considered a basal, or sometimes the sole, feed for ruminant animals. The efficiency of utilization of rice straw could be improved by adding non-conventional feed resources, such as azolla, banana plant, sweet potato leaves and other legumes and grasses. Rates of growth and feed efficiency by local animals were found to be higher in those fed with urea treated rice straw or bagasse, with or without the addition of concentrates, than in animals fed untreated straw. Rations were also found to be satisfactory when rice straw was fed in combination with urea, legumes such as cowpea hay, azolla and sweet potato leaves or concentrates. It is concluded that the utilization of rice straw by ruminants can be improved by suitable supplementation with non-conventional feed resources. Research is needed to evaluate the use of molasses as a feed ingredient for ruminants in Bangladesh. (author)

Optimizing economic benefit of rooftop photovoltaic (PV) systems through lowering energy demand of industrial halls

NARCIS (Netherlands)

Lee, B.; Trcka, M.; Hensen, J.L.M.

2012-01-01

Industrial halls are characterized with their relatively high roof-to-floor ratio, which facilitates ready deployment of photovoltaic (PV) systems on the rooftop. To promote deployment of PV systems, feed-in tariff (FIT) higher than the electricity rate is available in many countries to subsidize

Electromagnetic compatibility (EMC) part 6-2 : generic standards : immunity for industrial environments

CERN Document Server

International Electrotechnical Commission. Geneva

1999-01-01

Applies to electrical and electronic apparatus intended for use in industrial environments, for which no designed product or product-family immunity standard exists. Immunity requirements in the frequency range 0 Hz to 400 GHz are covered, in relation to continuous and transient, conducted and radiated disturbances, including electrostatic discharges. Test requirements are specified for each port considered. Apparatus intended to be used in industrial locations are characterized by the existence of one or more of the following: - a power network exists powered by a high or medium voltage power transformer for the supply of an installation feeding manufacturing or similar plant; - industrial, scientific and medical (ISM) apparatus; - heavy inductive or capacitive loads are frequently switched; - currents and associated magnetic fields are high.

Association of fathers' feeding practices and feeding style on preschool age children's diet quality, eating behavior and body mass index.

Science.gov (United States)

Vollmer, Rachel L; Adamsons, Kari; Foster, Jaime S; Mobley, Amy R

2015-06-01

The associations of parental feeding practices and feeding style with childhood obesity have gained more attention in the literature recently; however, fathers are rarely included within these studies. The aim of this research was to determine the relationship of paternal feeding practices on child diet quality, weight status, and eating behavior, and the moderating effect of paternal feeding style on these relationships in preschool age children. This study included a one-time, one-on-one interview with biological fathers of preschoolers (n = 150) to assess feeding practices (Child Feeding Questionnaire), feeding style (Caregiver Feeding Style Questionnaire), child eating behaviors (Child Eating Behavior Questionnaire), and diet quality (24 hour recall, Healthy Eating Index). Height and weight for each father and child were also measured and Body Mass Index (BMI) or BMI z-score calculated. Linear regression was used to test the relationship between paternal feeding practices, style and child diet quality and/or body weight. Overall, the findings revealed that a father's feeding practices and feeding style are not associated with children's diet quality or weight status. However, child eating behaviors are associated with child BMI z-score and these relationships are moderated by paternal feeding practices. For example, child satiety responsiveness is inversely (β = -.421, p = 0.031) associated with child BMI z-score only if paternal restriction scores are high. This relationship is not significant when paternal restriction scores are low (β = -.200, p = 0.448). These results suggest that some child appetitive traits may be related to child weight status when exposed to certain paternal feeding practices. Future studies should consider the inclusion of fathers as their feeding practices and feeding style may be related to a child's eating behavior. Copyright © 2015 Elsevier Ltd. All rights reserved.

Use of recovered frying oils in chicken and rabbit feeds: effect on the fatty acid and tocol composition and on the oxidation levels of meat, liver and plasma.

Science.gov (United States)

Tres, A; Bou, R; Guardiola, F; Nuchi, C D; Magrinyà, N; Codony, R

2013-03-01

The addition of some fat co- and by-products to feeds is usual nowadays; however, the regulations of their use are not always clear and vary between countries. For instance, the use of recycled cooking oils is not allowed in the European Union, but they are used in other countries. However, oils recovered from industrial frying processes could show satisfactory quality for this purpose. Here we studied the effects of including oils recovered from the frying industry in rabbit and chicken feeds (at 30 and 60 g/kg, respectively) on the fatty acid (FA) and tocol (tocopherol + tocotrienol) compositon of meat, liver and plasma, and on their oxidative stability. Three dietary treatments (replicated eight times) were compared: fresh non-used oil (LOX); oil discarded from the frying industry, having a high content of secondary oxidation compounds (HOX); and an intermediate level (MOX) obtained by mixing 50 : 50 of LOX and HOX. The FA composition of oil diets and tissues was assessed by GC, their tocol content by HPLC, the thiobarbituric acid value was used to assess tissue oxidation status, and the ferrous oxidation-xylenol orange method was used to assess the susceptibility of tissues to oxidation. Our results indicate that FA composition of rabbit and chicken meat, liver and plasma was scarcely altered by the addition of recovered frying oils to feed. Differences were encountered in the FA composition between species, which might be attributed mainly to differences in the FA digestion, absorption and metabolism between species, and to some physiological dietary factors (i.e. coprophagy in rabbits that involves fermentation with FA structure modification). The α-tocopherol (αT) content of tissues was reduced in response to the lower αT content in the recovered frying oil. Differences in the content of other tocols were encountered between chickens and rabbits, which might be attributable to the different tocol composition of their feeds, as well as to species

Local agro-industrial by-products with potential use in Ghanaian aquaculture: a review

DEFF Research Database (Denmark)

Obirikorang, Kwasi Adu; Amisah, Stephen; Fialor, Simon Cudjoe

2015-01-01

plant by-products for use in fish grow-out facilities, particularly in tilapia production, which accounts for over 80 % of aquaculture production. This review thus identifies local agro-industrial byproducts with potential use in fish feeds based on their nutritional composition, total annual production......, competition for and seasonal availability and dynamics of these products as well as prices. The effects of dietary inclusions of these by-products on fish growth and feed utilisation are also reviewed. Based on the published works and other practical information reviewed, these by-products represent huge...... regions of the world where these crops and their resulting by-products are produced in commercial quantities...

Best-feeding the baby

African Journals Online (AJOL)

Enrique

Best-feeding the baby. Human infants should be fed their own mothers' breast- milk. Where this is unavailable, replacement feeding becomes necessary. Through the ages and right up to the present, human milk has been supplied by other lactating women within or from outside the family. Donated breast-milk has been ...

Effects of feeding bentonite clay upon ochratoxin A-induced immunosuppression in broiler chicks.

Science.gov (United States)

Khatoon, Aisha; Khan, Muhammad Zargham; Abidin, Zain Ul; Bhatti, Sheraz Ahmed

2018-03-01

A presence of mycotoxins in feed is one of the most alarming issues in the poultry feed industry. Ochratoxins, produced by several Aspergillus and Penicillium species, are important mycotoxin regarding the health status of poultry birds. Ochratoxins are further classified into to several subtypes (A, B, C, etc) depending on their chemical structures, but ochratoxin A (OTA) is considered the most important and toxic. Bentonite clay, belonging to phyllosilicates and formed from weathering of volcanic ashes, has adsorbent ability for several mycotoxins. The present study was designed to study the effects of bentonite clay upon OTA-induced immunosuppression in broiler chicks. For this, 480 day-old broiler chicks were procured from a local hatchery and then different combinations of OTA (0.15, 0.3, or 1.0 mg/kg) and bentonite clay (5, 10, and 20 g/kg) were incorporated into their feed. At 13, 30, and 42 days of age, parameters such as antibody responses to sheep red blood cells, in situ lymphoproliferative responses to mitogen (PHA-P), and in situ phagocytic activity (i.e., via carbon clearance) were determined respectively. The results indicated there was a significant reduction of total antibody and immunoglobulin titres, lymphoproliferative responses, and phagocytic potential in OTA-treated birds, suggesting clear immunosuppression by OTA in birds in a dose-dependent manner. These results were also significantly lower in all combination groups (OTA with bentonite clay), suggesting few to no effects of feeding bentonite clay upon OTA- induced alterations in different immune parameters.

Racionalização do uso de força motriz em fábrica de ração Management of motive power use in animal feed industry

Directory of Open Access Journals (Sweden)

Carlos A. Teixeira

2005-08-01

granulated and transportation. The objective of this paper is to manage the use of electric energy, by matching motive power at the Pi Paf animal feed industry to the load needs. The average electric motors load index was 48.6%, indicating a likelihood of economy. The potential economy with electric energy using the best options of motive power was about R$ 24,426.50 per year (23.9%. To achieve this goal it is also necessary: (i to adjust relays and to choose fuses, (ii to schedule operation and (iii to build storage facilities.

Responsive versus scheduled feeding in preterm infants (Review)

OpenAIRE

Watson, Julie; McGuire, William

2015-01-01

Scheduled feeding of prescribed enteral volumes remains standard practice for preterm infants. However, feeding preterm infants in response to their feeding and satiation cues (responsive, cue-based, or infant led feeding) rather than at scheduled intervals might enhance parent experience and satisfaction, help in the establishment of independent oral feeding, increase nutrient intake and growth rates, and allow earlier hospital discharge.\\ud \\ud Objectives: To assess the effect of feeding pr...

Delayed Development of Feeding Skills in Children with Feeding Difficulties—Cross-sectional Study in a Brazilian Reference Center

Directory of Open Access Journals (Sweden)

Cláudia C. Ramos

2017-10-01

Full Text Available BackgroundDelays in gross motor development, sensory processing issues, and organic and behavioral problems are known to interfere in the development of feeding skills (FS; and—therefore—in the success of the process of feeding a child. Children with feeding difficulties (FD commonly present inadequacy of FS.ObjectivesAssessment of five FS in Brazilian children with FD, and search of associations with types of FD.MethodsCross-sectional study with 70 children below 10 years old. Data were obtained from medical records: age, gender, age at texture transitions, feeding phase (breastfeeding, weaning to solids or full solids at first complaint; characteristics of the meal (duration, environment, and shared meals with adults, self-feeding practices, use of feeding equipment and bottle, mouthing, feeding position and FD diagnosis. Skills were categorized according to standards for age. Chi-Square, Anova Test (or non-parametric equivalent and Multinomial logistic regression tests were used, with a significance level of 5%.ResultsThere was no difference in FS (p > 0.05 or in the number of FS inadequateness (p = 0.84 according to FD diagnosis. The majority (94% of children presented at least one delayed development of FS; 1/3 presented delays in more than half of the FS. The most prevalent inadequacies in FS were inadequate feeding position (73.5%, prolonged bottle feeding (56.9%, and inadequate self-feeding practices (37.9%. Feeding complaints first appeared at 10.9 ± 11.4 months, and picky eating was the most prevalent type of FD (37.1%. Most children were fed in inadequate environments (55.2%, without the company of adults (78%. Transition to solid foods occurred at 16 ± 5.6 months. Multinomial logistic regression showed no difference in likelihood of presenting any type of FD compared to picky eating, according to FS. Age at texture transition both from breastfeeding to complementary feeding (p = 0.95, and from

Process Integration Analysis of an Industrial Hydrogen Production Process

OpenAIRE

Stolten, Detlef; Grube, Thomas; Tock, Laurence; Maréchal, François; Metzger, Christian; Arpentinier, Philippe

2010-01-01

The energy efficiency of an industrial hydrogen production process using steam methane reforming (SMR) combined with the water gas shift reaction (WGS) is analyzed using process integration techniques based on heat cascade calculation and pinch analysis with the aim of identifying potential measures to enhance the process performance. The challenge is to satisfy the high temperature heat demand of the SMR reaction by minimizing the consumption of natural gas to feed the combustion and to expl...

Partial Optimization of Endo-1, 4-Β-Xylanase Production by Aureobasidium pullulansUsing Agro-Industrial Residues

Directory of Open Access Journals (Sweden)

Shaghayegh Nasr

2013-12-01

This finding indicates the feasibility of growing of A. pullulans strain SN090 on wheat bran as an alternate economical substrate in order for reducing the costs of enzyme production and using this fortified agro-industrial byproduct in formulation of animal feed.

A new stoichiometric miniaturization strategy for screening of industrial microbial strains: application to cellulase hyper-producing Trichoderma reesei strains

Directory of Open Access Journals (Sweden)

Jourdier Etienne

2012-05-01

Full Text Available Abstract Background During bioprocess development, secondary screening is a key step at the boundary between laboratory and industrial conditions. To ensure an effective high-throughput screening, miniaturized laboratory conditions must mimic industrial conditions, especially for oxygen transfer, feeding capacity and pH stabilization. Results A feeding strategy has been applied to develop a simple screening procedure, in which a stoichiometric study is combined with a standard miniaturization procedure. Actually, the knowledge of all nutriments and base or acid requirements leads to a great simplification of pH stabilization issue of miniaturized fed-batch cultures. Applied to cellulase production by Trichoderma reesei, this strategy resulted in a stoichiometric mixed feed of carbon and nitrogen sources. While keeping the pH between shake flask and stirred bioreactor comparable, the developed shake flask protocol reproduced the strain behaviour under stirred bioreactor conditions. Compared to a an already existing miniaturized shake flasks protocol, the cellulase concentration was increased 5-fold, reaching about 10 g L-1. Applied to the secondary screening of several clones, the newly developed protocol succeeded in selecting a clone with a high industrial potential. Conclusions The understanding of a bioprocess stoichiometry contributed to define a simpler and more effective miniaturization. The suggested strategy can potentially be applied to other fed-batch processes, for the screening of either strain collections or experimental conditions.

Effect of cup feeding and bottle feeding on breastfeeding in late preterm infants: a randomized controlled study.

Science.gov (United States)

Yilmaz, Gonca; Caylan, Nilgun; Karacan, Can Demir; Bodur, İlknur; Gokcay, Gulbin

2014-05-01

Cup feeding has been used as an alternative feeding method for preterm infants. The purpose of this study was to determine the effect of bottle and cup feeding on exclusive breastfeeding rates at hospital discharge and 3 and 6 months post-discharge in late preterm infants. Included in the study were preterm infants of 32 to 35 weeks' gestation fed only by intermittent gastric tube at the time of recruitment; 522 infants were randomly assigned to 2 groups: the cup-fed group (n = 254) and bottle-fed group (n = 268). Main outcomes were prevalence of exclusive breastfeeding at discharge and 3 and 6 months after discharge, and length of hospital stay. Infants randomized to cup versus bottle feeding were more likely to be exclusively breastfed at discharge home (relative risk [RR], 1.58; 95% confidence interval [CI], 1.36-1.83), 3 months after discharge (RR, 1.64; 95% CI, 1.42-1.89), and 6 months after discharge (RR, 1.36; 95% CI, 1.14-1.63). There was no significant difference between groups for length of hospital stay. The mean hospital stay was 25.96 ± 2.20 days in the bottle-fed group and 25.68 ± 2.22 days in the cup-fed group. There was no significant difference between groups for time spent feeding, feeding problems, or weight gain in hospital. Cup feeding significantly increased the likelihood of late preterm infants being exclusively breastfed at discharge and 3 and 6 months after discharge, and cup feeding did not increase the length of hospital stay. Overall, we recommend cup feeding as a transitional method prior to breastfeeding for late preterm infants during hospitalization.

Adherence with early infant feeding and complementary feeding guidelines in the Cork BASELINE Birth Cohort Study.

Science.gov (United States)

O'Donovan, Sinéad M; Murray, Deirdre M; Hourihane, Jonathan O'B; Kenny, Louise C; Irvine, Alan D; Kiely, Mairead

2015-10-01

To describe adherence with infant feeding and complementary feeding guidelines. Prospective study of infant feeding and complementary feeding practices were collected as part of the Cork BASELINE Birth Cohort Study. Cork, Ireland. Data are described for the 823 infants for whom a diary was completed. Breast-feeding was initiated in 81 % of infants, and 34 %, 14 % and 1 % of infants were exclusively breast-fed at hospital discharge, 2 and 6 months, respectively. Stage one infant formula decreased from 71 % at 2 months to 13 % at 12 months. The majority of infants (79 %) were introduced to solids between 17 and 26 weeks and 18 % were given solid foods before 17 weeks. Mothers of infants who commenced complementary feeding prior to 17 weeks were younger (29·8 v. 31·5 years; P<0·001) and more likely to smoke (18 v. 8 %; P=0·004). The first food was usually baby rice (69 %), infant breakfast cereals (14 %) or fruit/vegetables (14 %). Meals were generally home-made (49 %), cereal-based (35 %), manufactured (10 %), dairy (3 %) and dessert-based (3 %). The median gap between the first-second, second-third, third-fourth and fourth-fifth new foods was 4, 2, 2 and 2 d, respectively. We present the largest prospective cohort study to date on early infant feeding in Ireland. The rate of breast-feeding is low by international norms. Most mothers introduce complementary foods between 4 and 6 months with lengthy gaps between each new food/food product. There is a high prevalence of exposure to infant breakfast cereals, which are composite foods, among the first foods introduced.

Effect of early exposure to different feed presentations on feed sorting of dairy calves.

Science.gov (United States)

Miller-Cushon, E K; Bergeron, R; Leslie, K E; Mason, G J; Devries, T J

2013-07-01

This study examined how early exposure to different feed presentations affects development of feed sorting in dairy calves. Twenty Holstein bull calves were exposed for the first 8 wk of life to 1 of 2 feed presentation treatments: concentrate and chopped grass hay (haylage, 21.5% high-moisture corn, and 16.0% protein supplement) in wk 12 to 13. Intake was recorded daily and calves were weighed twice a week. Fresh feed and orts were sampled on d 1 to 4 of wk 6, 8, 9, 11, 12, and 13 for analysis of feed sorting, which was assessed through nutrient analysis for the MIX diet and particle size analysis for the TMR. The particle separator had 3 screens (19, 8, and 1.18mm) producing long, medium, short, and fine particle fractions. Sorting of nutrients or particle fractions was calculated as the actual intake as a percentage of predicted intake; values >100% indicate sorting for, whereas values <100% indicate sorting against. Feed presentation did not affect dry matter intake or growth. Prior to weaning, all calves selected in favor of hay; MIX calves consumed more neutral detergent fiber (NDF) than predicted (103.6%) and less nonfiber carbohydrates (NFC) than predicted (92.6%), and COM calves consumed, as a percentage of dry matter intake, 40.3% hay (vs. 30% offered rate). In wk 8, calves fed COM consumed more NFC than calves fed MIX (1.0 vs. 0.95kg/d) and less NDF (0.43 vs. 0.54kg/d), indicating greater selection in favor of concentrate. However, when provided the MIX diet, calves previously fed COM did not sort, whereas calves previously fed MIX consumed more NFC intake than predicted (103.2%) and less NDF intake than predicted (97.6%). Calves previously fed MIX maintained increased sorting after transition to the novel TMR, sorting against long particles (86.5%) and for short (101.8%) and fine (101.2%) particles. These results indicate that initially providing dairy calves with solid feeds as separate components, compared with as a mixed ration, reduces the extent of

Study on upgrading of oil palm wastes to animal feeds by radiation and fermentation processing

International Nuclear Information System (INIS)

Kume, Tamikazu; Matsuhashi, Shinpei; Ito, Hitoshi

1998-03-01

Upgrading of oil palm empty fruit bunch (EFB), which is a main by-product of palm oil industry, to animal feeds by radiation pasteurization and fermentation was investigated for recycling the agro-resources and reducing the environmental pollution. The following results were obtained: 1) The necessary dose for pasteurization of EFB contaminated by various microorganisms including aflatoxin producing fungi was determined as 10 kGy. The chemical and biological properties of EFB were changed little by irradiation up to 50 kGy. 2) In the fermentation process, Pleurotus sajor-caju was selected as the most effective fungi and the optimum condition for fermentation was clarified. The process of fermentation in suspension was also established for the liquid seed preparation. 3) The digestibility and nutritional value of fermented products were evaluated as ruminant animal feeds and the mushroom can be produced as by-product. 4) The pilot plant named Sterifeed was built at MINT and a large volume production has been trying for animal feeding test and economical evaluation. It is expected to develop the process for the commercial use in Malaysia and to expand the technique to Asian region through UNDP/RCA/IAEA project. (author)

Study on upgrading of oil palm wastes to animal feeds by radiation and fermentation processing

Energy Technology Data Exchange (ETDEWEB)

Kume, Tamikazu; Matsuhashi, Shinpei; Ito, Hitoshi [Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment; and others

1998-03-01

Upgrading of oil palm empty fruit bunch (EFB), which is a main by-product of palm oil industry, to animal feeds by radiation pasteurization and fermentation was investigated for recycling the agro-resources and reducing the environmental pollution. The following results were obtained: (1) The necessary dose for pasteurization of EFB contaminated by various microorganisms including aflatoxin producing fungi was determined as 10 kGy. The chemical and biological properties of EFB were changed little by irradiation up to 50 kGy. (2) In the fermentation process, Pleurotus sajor-caju was selected as the most effective fungi and the optimum condition for fermentation was clarified. The process of fermentation in suspension was also established for the liquid seed preparation. (3) The digestibility and nutritional value of fermented products were evaluated as ruminant animal feeds and the mushroom can be produced as by-product. (4) The pilot plant named Sterifeed was built at MINT and a large volume production has been trying for animal feeding test and economical evaluation. It is expected to develop the process for the commercial use in Malaysia and to expand the technique to Asian region through UNDP/RCA/IAEA project. (author)

Feeding the masses: H.J. Heinz and the creation of industrial food.

Science.gov (United States)

Petrick, Gabriella M

2009-03-01

The H.J. Heinz Company's commitment to the purity and quality of its products in the late nineteenth and early twentieth century helped usher in an era of industrial food. While canning had been around for decades, it was not until both scientist and technologists innovations solved problems like bacterial contamination and mass-produced cans that Americans began to eat canned food on a regular basis. In addition to money-back guarantees, Heinz pioneered product tastings as a marketing tool in an attempt to convince skeptical housewives that his products were not only delicious, but were also safe to eat.

Feed mechanism and method for feeding minute items

Science.gov (United States)

Stringer, Timothy Kent [Bucyrus, KS; Yerganian, Simon Scott [Lee's Summit, MO

2009-10-20

A feeding mechanism and method for feeding minute items, such as capacitors, resistors, or solder preforms. The mechanism is adapted to receive a plurality of the randomly-positioned and randomly-oriented extremely small or minute items, and to isolate, orient, and position one or more of the items in a specific repeatable pickup location wherefrom they may be removed for use by, for example, a computer-controlled automated assembly machine. The mechanism comprises a sliding shelf adapted to receive and support the items; a wiper arm adapted to achieve a single even layer of the items; and a pushing arm adapted to push the items into the pickup location. The mechanism can be adapted for providing the items with a more exact orientation, and can also be adapted for use in a liquid environment.

Stable isotope-labelled feed nutrients to assess nutrient-specific feed passage kinetics in ruminants

NARCIS (Netherlands)

Warner, D.; Dijkstra, J.; Hendriks, W.H.; Pellikaan, W.F.

2014-01-01

Knowledge of digesta passage kinetics in ruminants is essential to predict nutrient supply to the animal in relation to optimal animal performance, environmental pollution and animal health. Fractional passage rates (FPR) of feed are widely used in modern feed evaluation systems and mechanistic

Early discharge with tube feeding at home for preterm infants is associated with longer duration of breast feeding.

Science.gov (United States)

Meerlo-Habing, Z E; Kosters-Boes, E A; Klip, H; Brand, P L P

2009-07-01

Mothers of preterm infants are more likely to discontinue breast feeding early than mothers of term infants. We evaluated the effect of early discharge with tube feeding of preterm infants under close supervision by paediatric nurse specialists on the duration of breast feeding. Case-control study. Medium/high-care neonatal unit of a large district general hospital. Preterm infants (paediatric nurse specialists or regular follow-up of preterm infants discharged with oral feeding. Duration of breast feeding assessed by telephone interview 6 months after birth. There were 50 preterm infants in the early discharge group and 78 in the control group. Mothers in the early discharge group continued to breast feed longer than mothers in the control group (log rank test, p = 0.028). Four months after discharge, 63% of preterm infants in the control group were fed formula compared to 36% in the early discharge group (95% CI for difference 9% to 43%, p = 0.04). The relative risk of breast feeding cessation 6 months after birth in the early discharge group compared to the control group was 0.63 (95% CI 0.41 to 0.96). After adjustment for smoking, gestational age and birth weight, this relative risk was 0.67 (95% CI 0.43 to 1.05). Close supervision and follow-up by paediatric nurse specialists of preterm infants discharged early with tube feeding appears to increase duration of breast feeding. A randomised controlled trial to confirm these findings is warranted.

Chromium concentrations in ruminant feed ingredients.

Science.gov (United States)

Spears, J W; Lloyd, K E; Krafka, K

2017-05-01

Chromium (Cr), in the form of Cr propionate, has been permitted for supplementation to cattle diets in the United States at levels up to 0.50 mg of Cr/kg of DM since 2009. Little is known regarding Cr concentrations naturally present in practical feed ingredients. The present study was conducted to determine Cr concentrations in feed ingredients commonly fed to ruminants. Feed ingredients were collected from dairy farms, feed mills, grain bins, and university research farms. Mean Cr concentrations in whole cereal grains ranged from 0.025 mg/kg of DM for oats to 0.041 mg/kg of DM for wheat. Grinding whole samples of corn, soybeans, and wheat through a stainless steel Wiley mill screen greatly increased analyzed Cr concentrations. Harvested forages had greater Cr concentrations than concentrates, and alfalfa hay or haylage had greater Cr concentrations than grass hay or corn silage. Chromium in alfalfa hay or haylage (n = 13) averaged 0.522 mg/kg of DM, with a range of 0.199 to 0.889 mg/kg of DM. Corn silage (n = 21) averaged 0.220 mg of Cr/kg of DM with a range of 0.105 to 0.441 mg of Cr/kg of DM. By-product feeds ranged from 0.040 mg of Cr/kg of DM for cottonseed hulls to 1.222 mg of Cr/kg of DM for beet pulp. Of the feed ingredients analyzed, feed grade phosphate sources had the greatest Cr concentration (135.0 mg/kg). Most ruminant feedstuffs and feed ingredients had less than 0.50 mg of Cr/kg of DM. Much of the analyzed total Cr in feed ingredients appears to be due to Cr contamination from soil or metal contact during harvesting, processing, or both. Copyright © 2017 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Waste Feed Evaporation Physical Properties Modeling

International Nuclear Information System (INIS)

Daniel, W.E.

2003-01-01

This document describes the waste feed evaporator modeling work done in the Waste Feed Evaporation and Physical Properties Modeling test specification and in support of the Hanford River Protection Project (RPP) Waste Treatment Plant (WTP) project. A private database (ZEOLITE) was developed and used in this work in order to include the behavior of aluminosilicates such a NAS-gel in the OLI/ESP simulations, in addition to the development of the mathematical models. Mathematical models were developed that describe certain physical properties in the Hanford RPP-WTP waste feed evaporator process (FEP). In particular, models were developed for the feed stream to the first ultra-filtration step characterizing its heat capacity, thermal conductivity, and viscosity, as well as the density of the evaporator contents. The scope of the task was expanded to include the volume reduction factor across the waste feed evaporator (total evaporator feed volume/evaporator bottoms volume). All the physical properties were modeled as functions of the waste feed composition, temperature, and the high level waste recycle volumetric flow rate relative to that of the waste feed. The goal for the mathematical models was to predict the physical property to predicted simulation value. The simulation model approximating the FEP process used to develop the correlations was relatively complex, and not possible to duplicate within the scope of the bench scale evaporation experiments. Therefore, simulants were made of 13 design points (a subset of the points used in the model fits) using the compositions of the ultra-filtration feed streams as predicted by the simulation model. The chemistry and physical properties of the supernate (the modeled stream) as predicted by the simulation were compared with the analytical results of experimental simulant work as a method of validating the simulation software

Radiation pasteurization of mink feed; Effect of irradiated feed on reproductive performance, growth and fur quality of mink

Energy Technology Data Exchange (ETDEWEB)

Passey, C A; Roy, D; Savoie, L [St. Hyacinthe Food Research Centre, Agriculture (Canada); Malo, R [AgriZo Vet Consultants, St. Hyacinthe, QA (Canada); Wilson, J [J.J. Wilson et Fils, Inc., St. Hyacinthe, QA (Canada)

1990-01-01

No significant differences were observed in the net birth rate of mink kits/female between the 7 breeding groups. However, there was reduced incidence (P=0.05) of kit deaths among the females receiving irradiated feed, and larger kit size (P<0.0001) at birth particularly for the litter size of 5-8 kits. The second generation minks born to parents receiving feed irradiated to a planned dose of 1 kGy weighed on average about 2.5% more, and their fur was on average about 1{plus minus}0.26 cm longer (12% more males making the top length grade). Moreover, there was no effect of irradiated feed on fur quality. Irradiation of mink feed with subsequent frozen storage of the meat component improved the microbiological quality by decreasing the incidence of Pseudomonas sp. and Salmonella sp. Radiation pasteurization of mink feed (frozen meat to 1 kGy, and dry feed to 2 kGy or more) should therefore help improve feed utilization, keep animals healthier, and reproducing better without affecting fur quality. (author).

Co-occurring mycotoxins in animal feeds

African Journals Online (AJOL)

STORAGESEVER

2008-07-04

Jul 4, 2008 ... hazards present in animal feeds pose a threat to human health. Public concern on health matters related to food has ... meat, milk or eggs (Park and Laing, 1993; Dorner et al.,. 1994). ... are used in animal feed production (yellow whole maize, sifted ... number of fungal species than processed food and feed.

Survival of viral pathogens in animal feed ingredients under transboundary shipping models

Science.gov (United States)

Bauermann, Fernando V.; Niederwerder, Megan C.; Singrey, Aaron; Clement, Travis; de Lima, Marcelo; Long, Craig; Patterson, Gilbert; Sheahan, Maureen A.; Stoian, Ana M. M.; Petrovan, Vlad; Jones, Cassandra K.; De Jong, Jon; Ji, Ju; Spronk, Gordon D.; Minion, Luke; Christopher-Hennings, Jane; Zimmerman, Jeff J.; Rowland, Raymond R. R.; Nelson, Eric; Sundberg, Paul; Diel, Diego G.

2018-01-01

The goal of this study was to evaluate survival of important viral pathogens of livestock in animal feed ingredients imported daily into the United States under simulated transboundary conditions. Eleven viruses were selected based on global significance and impact to the livestock industry, including Foot and Mouth Disease Virus (FMDV), Classical Swine Fever Virus (CSFV), African Swine Fever Virus (ASFV), Influenza A Virus of Swine (IAV-S), Pseudorabies virus (PRV), Nipah Virus (NiV), Porcine Reproductive and Respiratory Syndrome Virus (PRRSV), Swine Vesicular Disease Virus (SVDV), Vesicular Stomatitis Virus (VSV), Porcine Circovirus Type 2 (PCV2) and Vesicular Exanthema of Swine Virus (VESV). Surrogate viruses with similar genetic and physical properties were used for 6 viruses. Surrogates belonged to the same virus families as target pathogens, and included Senecavirus A (SVA) for FMDV, Bovine Viral Diarrhea Virus (BVDV) for CSFV, Bovine Herpesvirus Type 1 (BHV-1) for PRV, Canine Distemper Virus (CDV) for NiV, Porcine Sapelovirus (PSV) for SVDV and Feline Calicivirus (FCV) for VESV. For the remaining target viruses, actual pathogens were used. Virus survival was evaluated using Trans-Pacific or Trans-Atlantic transboundary models involving representative feed ingredients, transport times and environmental conditions, with samples tested by PCR, VI and/or swine bioassay. SVA (representing FMDV), FCV (representing VESV), BHV-1 (representing PRV), PRRSV, PSV (representing SVDV), ASFV and PCV2 maintained infectivity during transport, while BVDV (representing CSFV), VSV, CDV (representing NiV) and IAV-S did not. Notably, more viruses survived in conventional soybean meal, lysine hydrochloride, choline chloride, vitamin D and pork sausage casings. These results support published data on transboundary risk of PEDV in feed, demonstrate survival of certain viruses in specific feed ingredients (“high-risk combinations”) under conditions simulating transport between

Feed rate affecting surface roughness and tool wear in dry hard turning of AISI 4140 steel automotive parts using TiN+AlCrN coated inserts

Science.gov (United States)

Paengchit, Phacharadit; Saikaew, Charnnarong

2018-02-01

This work aims to investigate the effects of feed rate on surface roughness (Ra) and tool wear (VB) and to obtain the optimal operating condition of the feed rate in dry hard turning of AISI 4140 chromium molybdenum steel for automotive industry applications using TiN+AlCrN coated inserts. AISI 4140 steel bars were employed in order to carry out the dry hard turning experiments by varying the feed rates of 0.06, 0.08 and 0.1 mm/rev based on experimental design technique that can be analyzed by analysis of variance (ANOVA). In addition, the cutting tool inserts were examined after machining experiments by SEM to evaluate the effect of turning operations on tool wear. The results showed that averages Ra and VB were significantly affected by the feed rate at the level of significance of 0.05. Averages Ra and VB values at the feed rate of 0.06 mm/rev were lowest compared to average values at the feed rates of 0.08 and 0.1 mm/rev, based on the main effect plot.

Pediatric feeding and swallowing rehabilitation: An overview.

Science.gov (United States)

van den Engel-Hoek, Lenie; Harding, Celia; van Gerven, Marjo; Cockerill, Helen

2017-05-16

Children with neurological disabilities frequently have problems with feeding and swallowing. Such problems have a significant impact on the health and well-being of these children and their families. The primary aims in the rehabilitation of pediatric feeding and swallowing disorders are focused on supporting growth, nutrition and hydration, the development of feeding activities, and ensuring safe swallowing with the aim of preventing choking and aspiration pneumonia. Pediatric feeding and swallowing disorders can be divided into four groups: transient, developmental, chronic or progressive.This article provides an overview of the available literature about the rehabilitation of feeding and swallowing disorders in infants and children. Principles of motor control, motor learning and neuroplasticity are discussed for the four groups of children with feeding and swallowing disorders.

Effect of feed restriction and feeding plans on performance, slaughter traits and body composition of growing rabbits

Directory of Open Access Journals (Sweden)

Marco Birolo

2017-06-01

Full Text Available Two feeding systems (L, ad libitum vs. R, feed restriction were combined with 3 feeding plans (MM, MH, HH to evaluate the effects on performance, slaughter results, body composition and nitrogen balance of 300 commercial crossbred rabbits kept individually from weaning to slaughter (34-70 d of age. The R rabbits were fed from 80% (first days on trial to 100% (end of 3rd wk of ad libitum intake, whereafter R rabbits had free access to feed. The 3 feeding plans were: MM plan, M diet with moderate digestible energy (DE content, 10.6 MJ/kg, throughout the trial; HH plan, H diet with high DE content, 11.1 MJ/kg, throughout the trial; MH plan, M diet for the first 3 wk and H diet for the last 2 wk. Feed restriction did not affect nutrient digestibility, growth rate on the whole trial and slaughter results, but improved feed conversion (2.96 vs. 2.89 in L and R rabbits, respectively; P<0.01 and reduced N excretion (2.16 vs. 2.07 g excreted N/d, in L and R rabbits; P<0.05. At the end of the first period (55 d, R rabbits showed lower empty body protein, lipid, and gross energy gains than L rabbits, but differences disappeared within the end of the trial. The HH plan improved feed conversion (2.97 vs. 2.89 for MM vs. HH; P<0.05, but increased excreted N (2.03 vs. 2.17 g/d; P<0.001 in comparison with the MM plan due to the higher digestible protein/DE ratio of H diet, whereas the MH plan showed intermediate results. In conclusion, a moderate feed restriction during post weaning improved feed conversion and reduced N excretion without negative effects on growth or slaughter results. Moreover, N excretion was confirmed to depend largely on dietary nitrogen content.

Cup feeding versus other forms of supplemental enteral feeding for newborn infants unable to fully breastfeed.

Science.gov (United States)

Flint, Anndrea; New, Karen; Davies, Mark W

2016-08-31

Breast milk provides optimal nutrition for term and preterm infants, and the ideal way for infants to receive breast milk is through suckling at the breast. Unfortunately, this may not always be possible for medical or physiological reasons such as being born sick or preterm and as a result requiring supplemental feeding. Currently, there are various ways in which infants can receive supplemental feeds. Traditionally in neonatal and maternity units, bottles and nasogastric tubes have been used; however, cup feeding is becoming increasingly popular as a means of offering supplemental feeds in an attempt to improve breastfeeding rates. There is no consistency to guide the choice of method for supplemental feeding. To determine the effects of cup feeding versus other forms of supplemental enteral feeding on weight gain and achievement of successful breastfeeding in term and preterm infants who are unable to fully breastfeed. We used the standard search strategy of the Cochrane Neonatal Review group to search the Cochrane Central Register of Controlled Trials (CENTRAL 2016, Issue 1), MEDLINE via PubMed (1966 to 31 January 2016), Embase (1980 to 31 January 2016), and CINAHL (1982 to 31 January 2016). We also searched clinical trials' databases, conference proceedings, and the reference lists of retrieved articles for randomised controlled trials and quasi-randomised trials. Randomised or quasi-randomised controlled trials comparing cup feeding to other forms of enteral feeding for the supplementation of term and preterm infants. Data collection and analysis was performed in accordance with the methods of Cochrane Neonatal. We used the GRADE approach to assess the quality of evidence.The review authors independently conducted quality assessments and data extraction for included trials. Outcomes reported from these studies were: weight gain; proportion not breastfeeding at hospital discharge; proportion not feeding at three months of age; proportion not feeding at six

Waste Feed Delivery Planning at Hanford - 13232

International Nuclear Information System (INIS)

Certa, Paul J.; Hohl, Ted M.; Kelly, James W.; Larsen, Douglas C.; West, Elizha B.; Ritari, Jaakob S.; Rodriguez, Juissepp S.

2013-01-01

The Integrated Waste Feed Delivery Plan (IWFDP) describes how waste feed will be delivered to the Waste Treatment and Immobilization Plant (WTP) to safely and efficiently accomplish the River Protection Project (RPP) mission. The IWFDP, which is integrated with the Baseline Case operating scenario, is comprised of three volumes. Volume 1 - Process Strategy provides an overview of waste feed delivery (WFD) and describes how the WFD system will be used to prepare and deliver feed to the WTP based on the equipment configuration and functional capabilities of the WFD system. Volume 2 - Campaign Plan describes the plans for the first eight campaigns for delivery to the WTP, evaluates projected feed for systematic issues, projects 242-A Evaporator campaigns, and evaluates double-shell tank (DST) space and availability of contingency feed. Volume 3 - Project Plan identifies the scope and timing of the DST and infrastructure upgrade projects necessary to feed the WTP, and coordinates over 30 projectized projects and operational activities that comprise the needed WFD upgrades. (authors)

Waste Feed Delivery Planning at Hanford - 13232

Energy Technology Data Exchange (ETDEWEB)

Certa, Paul J.; Hohl, Ted M.; Kelly, James W.; Larsen, Douglas C.; West, Elizha B.; Ritari, Jaakob S.; Rodriguez, Juissepp S. [Washington River Protection Solutions, LLC, P.O. 850, Richland, WA 99352 (United States)

2013-07-01

The Integrated Waste Feed Delivery Plan (IWFDP) describes how waste feed will be delivered to the Waste Treatment and Immobilization Plant (WTP) to safely and efficiently accomplish the River Protection Project (RPP) mission. The IWFDP, which is integrated with the Baseline Case operating scenario, is comprised of three volumes. Volume 1 - Process Strategy provides an overview of waste feed delivery (WFD) and describes how the WFD system will be used to prepare and deliver feed to the WTP based on the equipment configuration and functional capabilities of the WFD system. Volume 2 - Campaign Plan describes the plans for the first eight campaigns for delivery to the WTP, evaluates projected feed for systematic issues, projects 242-A Evaporator campaigns, and evaluates double-shell tank (DST) space and availability of contingency feed. Volume 3 - Project Plan identifies the scope and timing of the DST and infrastructure upgrade projects necessary to feed the WTP, and coordinates over 30 projectized projects and operational activities that comprise the needed WFD upgrades. (authors)

Waste feed delivery planning at Hanford-13232

International Nuclear Information System (INIS)

Certa, Paul J.; West, Elizha B.; Rodriguez, Juissepp S.; Hohl, Ted M.; Larsen, Douglas C.; Ritari, Jaakob S.; Kelly, James W.

2013-01-01

The Integrated Waste Feed Delivery Plan (IWFDP) describes how waste feed will be delivered to the Waste Treatment and Immobilization Plant (WTP) to safely and efficiently accomplish the River Protection Project (RPP) mission. The IWFDP, which is integrated with the Baseline Case operating scenario, is comprised of three volumes. Volume 1 - Process Strategy provides an overview of waste feed delivery (WFD) and describes how the WFD system will be used to prepare and deliver feed to the WTP based on the equipment configuration and functional capabilities of the WFD system. Volume 2 - Campaign Plan describes the plans for the first eight campaigns for delivery to the WTP, evaluates projected feed for systematic issues, projects 242-A Evaporator campaigns, and evaluates double-shell tank (DST) space and availability of contingency feed. Volume 3 - Project Plan identifies the scope and timing of the DST and infrastructure upgrade projects necessary to feed the WTP, and coordinates over 30 projectized projects and operational activities that comprise the needed WFD upgrades

Child Feeding and Parenting Style Outcomes and Composite Score Measurement in the 'Feeding Healthy Food to Kids Randomised Controlled Trial'.

Science.gov (United States)

Duncanson, Kerith; Burrows, Tracy L; Collins, Clare E

2016-11-10

Child feeding practices and parenting style each have an impact on child dietary intake, but it is unclear whether they influence each other or are amenable to change. The aims of this study were to measure child feeding and parenting styles in the Feeding Healthy Food to Kids (FHFK) Randomized Controlled Trial (RCT) and test a composite child feeding score and a composite parenting style score. Child feeding and parenting style data from 146 parent-child dyads (76 boys, aged 2.0-5.9 years) in the FHFK study were collected over a 12-month intervention. Parenting style was measured using parenting questions from the Longitudinal Study of Australian Children and the Child Feeding Questionnaire (CFQ) was used to measure child feeding practices. Data for both measures were collected at baseline, 3 and 12 months and then modelled to develop a composite child feeding score and a parenting score. Multivariate mixed effects linear regression was used to measure associations between variables over time. All child feeding domains from the CFQ were consistent between baseline and 12 months ( p parenting style domain scores were consistent over 12 months ( p parenting style score within the FHFK RCT. In conclusion, composite scores have potential applications in the analysis of relationships between child feeding and dietary or anthropometric data in intervention studies aimed at improving child feeding or parenting style. These applications have the potential to make a substantial contribution to the understanding of child feeding practices and parenting style, in relation to each other and to dietary intake and health outcomes amongst pre-school aged children.

Mechanisms of Feeding Deterrence by Ziziphins.

Science.gov (United States)

1985-05-30

number) e mechanism of feeding deterrence by ziziphins for sout rn armyworms ( Spodoptera eridania ; Lepidoptera:Noctuidae) was investigated using bo long... Spodoptera eridania , to investigate the mechanisms of feeding deterrence by ziziphins extracted from the leaves of • .Ziziphus jujuba. Evaluation...Videotape Analysis of Feeding Suppression in the Southern Armyworm ( Spodoptera eridania ; Lepidoptera: Noctuidae) Produced by Extracts of the

Determining the amount of waste plastics in the feed of Austrian waste-to-energy facilities

OpenAIRE

Schwarzb?ck, Therese; Van Eygen, Emile; Rechberger, Helmut; Fellner, Johann

2016-01-01

Although thermal recovery of waste plastics is widely practiced in many European countries, reliable information on the amount of waste plastics in the feed of waste-to-energy plants is rare. In most cases the amount of plastics present in commingled waste, such as municipal solid waste, commercial, or industrial waste, is estimated based on a few waste sorting campaigns, which are of limited significance with regard to the characterisation of plastic flows. In the present study, an alternati...

Individual and Combined Occurrence of Mycotoxins in Feed Ingredients and Complete Feeds in China.

Science.gov (United States)

Ma, Rui; Zhang, Lei; Liu, Meng; Su, Yong-Teng; Xie, Wen-Mei; Zhang, Ni-Ya; Dai, Jie-Fan; Wang, Yun; Rajput, Shahid Ali; Qi, De-Sheng; Karrow, Niel Alexander; Sun, Lv-Hui

2018-03-07

The objective of this study was to investigate the individual and combined contamination of aflatoxin B₁ (AFB₁), zearalenone (ZEN) and deoxynivalenol (DON) in feedstuffs from different Provinces of China between 2016 and 2017. A total of 1569 samples, including 742 feed ingredients and 827 complete pig feed samples, were collected from various regions of China for mycotoxins analysis. The results showed that individual occurrence rates of AFB₁, ZEN, and DON were more than 83.3%, 88%, and 74.5%, respectively, in all the tested samples. DON was the most prevalent contaminant, followed by ZEN and AFB₁, with the average concentrations ranging from 450.0-4381.5 μg/kg, 2.3-729.2 μg/kg, and 1.3-10.0 μg/kg, respectively. Notable, 38.2%, 10.8%, and 0.6% of complete pig feeds were contaminated with DON, ZEN, and AFB₁ over China's regulatory limits, respectively. Moreover, over 75.0% analyzed samples were co-contaminated with two or three mycotoxins. In conclusion, the current study revealed that the feedstuffs in China were severely contaminated with DON, followed by ZEN and AFB₁ during the past two years. These findings highlight the importance of monitoring mycotoxins in livestock feed and implementing feed management and bioremediation strategies to reduce mycotoxin exposure.

Feeding Difficulties in Children with Esophageal Atresia.

Science.gov (United States)

Mahoney, Lisa; Rosen, Rachel

2016-06-01

The current available literature evaluating feeding difficulties in children with esophageal atresia was reviewed. The published literature was searched through PubMed using a pre-defined search strategy. Feeding difficulties are commonly encountered in children and adults with repaired esophageal atresia [EA]. The mechanism for abnormal feeding includes both esophageal and oropharyngeal dysphagia. Esophageal dysphagia is commonly reported in patients with EA and causes include dysmotility, anatomic lesions, esophageal outlet obstruction and esophageal inflammation. Endoscopic evaluation, esophageal manometry and esophograms can be useful studies to evaluate for causes of esophageal dysphagia. Oropharyngeal dysfunction and aspiration are also important mechanisms for feeding difficulties in patients with EA. These patients often present with respiratory symptoms. Videofluoroscopic swallow study, salivagram, fiberoptic endoscopic evaluation of swallowing and high-resolution manometry can all be helpful tools to identify aspiration. Once diagnosed, management goals include reduction of aspiration during swallowing, reducing full column reflux into the oropharynx and continuation of oral feeding to maintain skills. We review specific strategies which can be used to reduce aspiration of gastric contents, including thickening feeds, changing feeding schedule, switching formula, trialing transpyloric feeds and fundoplication. Copyright © 2015 Elsevier Ltd. All rights reserved.

Short communication: Limit feeding dairy heifers: effect of feed bunk space and provision of a low-nutritive feedstuff.

Science.gov (United States)

Greter, A M; Kitts, B L; Devries, T J

2011-06-01

The objectives of this study were to examine the behavioral effects of providing limit-fed dairy heifers an increased amount of feed bunk space compared with recommended feed bunk allowance, and to determine if the effects of provision of extra bunk space would be comparable to those seen when limit-fed heifers are provided a low-nutritive feedstuff. Twelve Holstein dairy heifers (381.1 ± 44.8 d of age, 417.3 ± 47.9 kg), divided into groups of 4, were exposed to each of 3 treatments using a 3 × 3 Latin square design with 7-d periods. The treatments were (1) 0.68 m of feed bunk space/heifer (TMR-0.68), (2) 0.34 m of feed bunk space/heifer (TMR-0.34), and (3) 0.34 m of feed bunk space/heifer with an additional 0.34 m of feed bunk space available for free-choice straw (TMR-S). The total mixed ration was fed once daily at a restricted level (1.83% of body weight) and contained (dry matter basis) 19.9% alfalfa/grass haylage, 20.1% corn silage, 49.6% high-moisture corn, and 10.4% protein supplement. Group dry matter intake (DMI) was recorded daily. Behavior at the feed bunk was recorded for the last 4 d of each treatment period. Due to the provision of straw, DMI was highest on the TMR-S treatment compared with the other treatments (9.4 vs. 7.8 kg/d). Heifers spent the most time feeding when on the TMR-S treatment (147.7 min/d), with no difference in feeding time between the limit-fed TMR treatments (64.5 min/d). Within the TMR-S treatment, feeding time on the straw was 76.9 min/d; thus, the rate of consumption of only the TMR was similar across all treatments. Unrewarded time at the feed bunk (when no feed was present) did not differ between treatments. Heifers did not differ in competitive behavior when on the limit-fed TMR treatments (13.1 displacements/heifer per day). However, while on the TMR-S treatment, heifers displaced each other more frequently (23.8 displacements/heifer per day) than while on the other 2 treatments. Overall, results suggest that neither

Integrating Characterization of Smallholders’ Feeding Practices with On-Farm Feeding Trials to Improve Utilization of Crop Residues on Smallholder Farms

Directory of Open Access Journals (Sweden)

B. O. Kashongwe

2017-01-01

Full Text Available This study characterized wheat straw feeding practices in smallholder farms using cross sectional survey and the results informed the design of an experiment to improve the nutritive value of wheat straw with urea and yeast culture treatment. Three diets tested in 49 days’ feeding trial were farmers’ rainy season feeding practice (FP, addition of urea to wheat straw at the time of feeding (USWS, and 14 days’ incubation of straw with urea (UTWS. Yeast culture (15 g/day was mixed with commercial dairy meal at the point of feeding. Survey data identified farmers’ strategies in utilizing crop residues of which most important were improving storage facility (77.6%, adding molasses (54.5%, and buying a shredding machine (45.1%. On-farm feeding trial showed that intake was higher for UTWS than (p<0.05 for USWS while milk yield was higher with FP than (p<0.005 with UTWS or USWS but not different (p≥0.05 between UTWS and USWS. Results imply that farmers feeding practices of crop residues may be improved for dairy cows’ feeding and therefore UTWS could be used to support maintenance and milk production during dry season. Improving farmers feed storage facilities and training on incubation of wheat straw for dairy cattle feeding were recommended.

Effects of oils on feed mildew and quality.

Science.gov (United States)

Liu, Jie; Qi, Ming; Huang, Yakuan; Guo, Jiao; Zhang, Jiacai; Li, Chong; Zhang, Niya; Sun, Lvhui; Qi, Desheng

2017-08-01

This study was performed to determine the effects of oils on feed mildew and feed quality. Under different moisture content conditions (10%, 13% and 16%), the basal feeds were supplemented with 4%, 6%, 8%, 10% and 12% soybean oil. In addition, at different moisture content levels (10%, 13% and 16%), the basal feed was supplemented with 12% of various types of oil (soybean, peanut, corn and fish). Subsequently, a mixed mold spore suspension was added. The feed samples were incubated at 28°C, and the total mold, water activity (Aw), moisture, acid value, crude protein (CP), crude lipid (CL), crude ash (CA) and nitrogen-free extract (NFE) levels were determined at 15, 30, 45 and 60 days. The results showed no significant variations in the feed moisture, CP, CL, CA and NEF contents. However, the acid value gradually increased in the feed samples with an extended incubation time and increasing initial moisture. The feed moisture content was a critical factor controlling feed mildew, and high levels of oil supplementation caused an elevated Aw. Additionally, peanut oil promoted mold growth in feed. These results provide a reference for the production and scientific management of formulated feed. © 2016 Japanese Society of Animal Science.

Species identification of processed animal proteins (PAPs) in animal feed containing feed materials from animal origin.

Science.gov (United States)

Axmann, Sonja; Adler, Andreas; Brandstettner, Agnes Josephine; Spadinger, Gabriela; Weiss, Roland; Strnad, Irmengard

2015-01-01

Since June 2013 the total feed ban of processed animal proteins (PAPs) was partially lifted. Now it is possible to mix fish feed with PAPs from non-ruminants (pig and poultry). To guarantee that fish feed, which contains non-ruminant PAPs, is free of ruminant PAPs, it has to be analysed with a ruminant PCR assay to comply with the total ban of feeding PAPs from ruminants. However, PCR analysis cannot distinguish between ruminant DNA, which originates from proteins such as muscle and bones, and ruminant DNA, which comes from feed materials of animal origin such as milk products or fat. Thus, there is the risk of obtaining positive ruminant PCR signals based on these materials. The paper describes the development of the combination of two analysis methods, micro-dissection and PCR, to eliminate the problem of 'false-positive' PCR signals. With micro-dissection, single particles can be isolated and subsequently analysed with PCR.

Use of food waste, fish waste and food processing waste for China's aquaculture industry: Needs and challenge.

Science.gov (United States)

Mo, Wing Yin; Man, Yu Bon; Wong, Ming Hung

2018-02-01

China's aquaculture industry is growing dramatically in recent years and now accounts for 60.5% of global aquaculture production. Fish protein is expected to play an important role in China's food security. Formulated feed has become the main diet of farmed fish. The species farmed have been diversified, and a large amount of 'trash fish' is directly used as feed or is processed into fishmeal for fish feed. The use of locally available food waste as an alternative protein source for producing fish feed has been suggested as a means of tackling the problem of sourcing safe and sustainable feed. This paper reviews the feasibility of using locally available waste materials, including fish waste, okara and food waste. Although the fishmeal derived from fish waste, okara or food waste is less nutritious than fishmeal from whole fish or soybean meal, most fish species farmed in China, such as tilapia and various Chinese carp, grow well on diets with minimal amounts of fishmeal and 40% digestible carbohydrate. It can be concluded that food waste is suitable as a component of the diet of farmed fish. However, it will be necessary to revise regulations on feed and feed ingredients to facilitate the use of food waste in the manufacture of fish feed. Copyright © 2017 Elsevier B.V. All rights reserved.

A comparative study of wire feeding and powder feeding in direct diode laser deposition for rapid prototyping

Energy Technology Data Exchange (ETDEWEB)

Syed, Waheed Ul Haq [Laser Processing Research Centre, School of Mechanical Aerospace and Civil Engineering, Sackville Street Building, University of Manchester, P.O. Box 88, Manchester M60 1QD (United Kingdom)]. E-mail: w.syed@postgrad.manchester.ac.uk; Pinkerton, Andrew J. [Laser Processing Research Centre, School of Mechanical Aerospace and Civil Engineering, Sackville Street Building, University of Manchester, P.O. Box 88, Manchester M60 1QD (United Kingdom); Li Lin [Laser Processing Research Centre, School of Mechanical Aerospace and Civil Engineering, Sackville Street Building, University of Manchester, P.O. Box 88, Manchester M60 1QD (United Kingdom)

2005-07-15

Metal powder feeding has been used widely in various rapid prototyping and tooling processes such as direct laser deposition (DLD) and layered engineered net shaping (LENS) to achieve near net shape accuracy. Although powder recycling has been practiced, the material usage efficiency has been very low (normally below 30%). This study compares the process characteristics, advantages and disadvantages of wire- and powder-feed DLD. A 1.5 kW diode laser is used to build multiple layer parts, which are compared and analysed in terms of surface finish, microstructure and deposition efficiency. Scanning electron microscopy (SEM), X-ray diffraction and optical microscopy are used for the material characterisation. The microstructure of samples from both the methods is similar, with some porosity found in powder-feed components, but the surface finish and material usage efficiency is better for wire-feed samples. The deposition angle is found to be critical in the case of wire feeding and the characteristics of different feed angles are explored. Possible reasons for the different characteristics of the two deposition techniques are discussed.

Feed and organic matter

DEFF Research Database (Denmark)

Dalsgaard, Anne Johanne Tang

2011-01-01

impact on the receiving water body by reducing dissolved oxygen concentrations and increasing sedimentation. Within aquaculture systems, a high organic load may affect fish health and performance directly (e.g., gill disease) as well as indirectly (proliferation of pathogenic bacteria and parasites......, reduction of dissolved oxygen concentrations, etc.). In recirculating aquaculture systems (RAS), a high organic load caused by limited water exchange may affect biofilter performance by favouring heterotrophic bacteria at the expense of autotrophic, nitrifying bacteria. Organic waste in RAS primarily...... originates from undigested feed, but also metabolic losses, mucus, dead tissue, feed waste and intake water may contribute. The nutrient composition of the feed affects the quantity and composition of the organic (undigested) waste, and including for example plant protein ingredients may affect...

Enteral Feeding Set Handling Techniques.

Science.gov (United States)

Lyman, Beth; Williams, Maria; Sollazzo, Janet; Hayden, Ashley; Hensley, Pam; Dai, Hongying; Roberts, Cristine

2017-04-01

Enteral nutrition therapy is common practice in pediatric clinical settings. Often patients will receive a pump-assisted bolus feeding over 30 minutes several times per day using the same enteral feeding set (EFS). This study aims to determine the safest and most efficacious way to handle the EFS between feedings. Three EFS handling techniques were compared through simulation for bacterial growth, nursing time, and supply costs: (1) rinsing the EFS with sterile water after each feeding, (2) refrigerating the EFS between feedings, and (3) using a ready-to-hang (RTH) product maintained at room temperature. Cultures were obtained at baseline, hour 12, and hour 21 of the 24-hour cycle. A time-in-motion analysis was conducted and reported in average number of seconds to complete each procedure. Supply costs were inventoried for 1 month comparing the actual usage to our estimated usage. Of 1080 cultures obtained, the overall bacterial growth rate was 8.7%. The rinse and refrigeration techniques displayed similar bacterial growth (11.4% vs 10.3%, P = .63). The RTH technique displayed the least bacterial growth of any method (4.4%, P = .002). The time analysis in minutes showed the rinse method was the most time-consuming (44.8 ± 2.7) vs refrigeration (35.8 ± 2.6) and RTH (31.08 ± 0.6) ( P refrigerating the EFS between uses is the next most efficacious method for handling the EFS between bolus feeds.

Emotional climate, feeding practices, and feeding styles: an observational analysis of the dinner meal in Head Start families.

Science.gov (United States)

Hughes, Sheryl O; Power, Thomas G; Papaioannou, Maria A; Cross, Matthew B; Nicklas, Theresa A; Hall, Sharon K; Shewchuk, Richard M

2011-06-10

A number of studies conducted with ethnically diverse, low-income samples have found that parents with indulgent feeding styles had children with a higher weight status. Indulgent parents are those who are responsive to their child's emotional states but have problems setting appropriate boundaries with their child. Because the processes through which styles impact child weight are poorly understood, the aim of this study was to observe differences in the emotional climate created by parents (including affect, tone of voice, and gestures) and behavioral feeding practices among those reporting different feeding styles on the Caregiver's Feeding Styles Questionnaire. A secondary aim was to examine differences on child weight status across the feeding styles. Participants were 177 Head Start families from Houston, Texas (45% African-American; 55% Hispanic). Using an observational approach, the relationship between the observed emotional climate of the meal, behavioral feeding practices, and self-reported parent feeding styles were examined. Mean age of the children was 4.4 years (SD = 0.7) equally distributed across gender. Families were observed on 3 separate dinner occasions. Heights and weight were measured on the parents and children. Parents with self-reported indulgent feeding styles made fewer demands on their children to eat during dinner and showed lower levels of negative affect and intrusiveness. Surprisingly, these parents also showed higher levels of emotional detachment with their children during dinner. Hispanic boys with indulgent parents had significantly higher BMI z scores compared to Hispanic boys in the other three feeding style groups. No other differences were found on child weight status. Results suggest that the emotional climate created by indulgent parents during dinner and their lack of demands on their children to eat may play an important role in how young children become overweight. Numerous observed emotional climate and behavioral

Radiation pasteurization of mink feed: Effect of irradiated feed on reproductive performance, growth and fur quality of mink

Science.gov (United States)

Passey, C. A.; Roy, D.; Savoie, L.; Malo, R.; Wilson, J.

No significant differences were observed in the net birth rate of kits/female between the 7 breeding groups. However, there was reduced incidence (P = 0.05) of kit deaths among the females receiving irradiated feed, and larger kit size (P pasteurization of mink feed (frozen meat to 1 kGy, and dry feed to 2 kGy or more) should therefore help improve feed utilization, keep the animals healthier, and reproducing better without affecting fur quality.

Genome-wide association and systems genetic analyses of residual feed intake, daily feed consumption, backfat and weight gain in pigs

DEFF Research Database (Denmark)

Do, Duy Ngoc; Ostersen, Tage; Strathe, Anders Bjerring

2014-01-01

Feed efficiency is one of the major components determining costs of animal production. Residual feed intake (RFI) is defined as the difference between the observed and the expected feed intake given a certain production. Residual feed intake 1 (RFI1) was calculated based on regression of individu...

Modular magazine for suitable handling of microparts in industry

Science.gov (United States)

Grimme, Ralf; Schmutz, Wolfgang; Schlenker, Dirk; Schuenemann, Matthias; Stock, Achim; Schaefer, Wolfgang

1998-01-01

Microassembly and microadjustment techniques are key technologies in the industrial production of hybrid microelectromechanical systems. One focal point in current microproduction research and engineering is the design and development of high-precision microassembly and microadjustment equipment capable of operating within the framework of flexible automated industrial production. As well as these developments, suitable microassembly tools for industrial use also need to be equipped with interfaces for the supply and delivery of microcomponents. The microassembly process necessitates the supply of microparts in a geometrically defined manner. In order to reduce processing steps and production costs, there is a demand for magazines capable of providing free accessibility to the fixed microcomponents. Commonly used at present are feeding techniques, which originate from the field of semiconductor production. However none of these techniques fully meets the requirements of industrial microassembly technology. A novel modular magazine set, developed and tested in a joint project, is presented here. The magazines are able to hold microcomponents during cleaning, inspection and assembly without nay additional handling steps. The modularity of their design allows for maximum technical flexibility. The modular magazine fits into currently practiced SEMI standards. The design and concept of the magazine enables industrial manufacturers to promote a cost-efficient and flexible precision assembly of microelectromechanical systems.

Confirmatory factor analysis of the Feeding Emotions Scale. A measure of parent emotions in the context of feeding.

Science.gov (United States)

Frankel, Leslie; Fisher, Jennifer O; Power, Thomas G; Chen, Tzu-An; Cross, Matthew B; Hughes, Sheryl O

2015-08-01

Assessing parent affect is important because studies examining the parent-child dyad have shown that parent affect has a profound impact on parent-child interactions and related outcomes. Although some measures that assess general affect during daily lives exist, to date there are only few tools that assess parent affect in the context of feeding. The aim of this study was to develop an instrument to measure parent affect specific to the feeding context and determine its validity and reliability. A brief instrument consisting of 20 items was developed that specifically asks how parents feel during the feeding process. This brief instrument draws on the structure of a well-validated general affect measure. A total of 296 Hispanic and Black Head Start parents of preschoolers completed the Feeding Emotions Scale along with other parent-report measures as part of a larger study designed to better understand feeding interactions during the dinner meal. Confirmatory factor analysis supported a two-factor model with independent subscales of positive affect and negative affect (Cronbach's alphas of 0.85 and 0.84, respectively). Concurrent and convergent construct validity was evaluated by correlating the subscales of the Feeding Emotions Scale with positive emotionality and negative emotionality from the Differential Emotions Scale - a measure of general adult emotions. Concurrent and convergent criterion validity was evaluated by testing mean differences in affect across parent feeding styles using ANOVA. A significant difference was found across maternal weight status for positive feeding affect. The resulting validated measure can be used to assess parent affect in studies of feeding to better understand how interactions during feeding may impact the development of child eating behaviors and possibly weight status. Copyright © 2015 Elsevier Ltd. All rights reserved.

Robotic milking: Feeding strategies and economic returns.

Science.gov (United States)

Bach, Alex; Cabrera, Victor

2017-09-01

Cows in herds equipped with conventional milking parlors follow a structured, consistent, and social milking and feeding routine. Furthermore, in most cases cows in conventional herds receive all their nutrients from a total mixed ration, whereas in herds equipped with robotic or automatic milking systems (AMS) a fraction of their nutrients is provided during milking, mainly as a means to attract cows to the milking system. In this regards, AMS present both a challenge and an opportunity for feeding cows. The main challenge resides in maintaining a minimum and relatively constant milking frequency in AMS. However, milking frequency is dependent on many factors, including the social structure of the herd, the farm layout design, the type of traffic imposed to cows, the type of flooring, the health status of the cow (especially lameness, but also mastitis, metritis, among others), the stage of lactation, the parity, and the type of ration fed at the feed bunk and the concentrate offered in the AMS. Uneven milk frequency has been associated with milk losses and increased risk of mastitis, but most importantly it is a lost opportunity for milking the cow and generating profit. On the other hand, the opportunity from AMS resides in the possibility of milking more frequently and feeding cows more precisely or more closely to their nutrient needs on an individual basis, potentially resulting in a more profitable production system. But, feeding cows in the parlor or AMS has many challenges. On one side, feeding starchy, highly palatable ingredients in large amounts may upset rumen fermentation or alter feeding behavior after milking, whereas feeding high-fiber concentrates may compromise total energy intake and limit milking performance. Nevertheless, AMS (and some milking parlors, especially rotary ones) offer the possibility of feeding the cows to their estimated individual nutrient needs by combining different feeds on real time with the aim of maximizing profits rather