WorldWideScience

Sample records for fatigue design handbook

  1. Handbook of optical design

    CERN Document Server

    Malacara-Hernández, Daniel

    2013-01-01

    Handbook of Optical Design, Third Edition covers the fundamental principles of geometric optics and their application to lens design in one volume. It incorporates classic aspects of lens design along with important modern methods, tools, and instruments, including contemporary astronomical telescopes, Gaussian beams, and computer lens design. Written by respected researchers, the book has been extensively classroom-tested and developed in their lens design courses. This well-illustrated handbook clearly and concisely explains the intricacies of optical system design and evaluation. It also di

  2. DOE handbook: Design considerations

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-04-01

    The Design Considerations Handbook includes information and suggestions for the design of systems typical to nuclear facilities, information specific to various types of special facilities, and information useful to various design disciplines. The handbook is presented in two parts. Part 1, which addresses design considerations, includes two sections. The first addresses the design of systems typically used in nuclear facilities to control radiation or radioactive materials. Specifically, this part addresses the design of confinement systems and radiation protection and effluent monitoring systems. The second section of Part 1 addresses the design of special facilities (i.e., specific types of nonreactor nuclear facilities). The specific design considerations provided in this section were developed from review of DOE 6430.1A and are supplemented with specific suggestions and considerations from designers with experience designing and operating such facilities. Part 2 of the Design Considerations Handbook describes good practices and design principles that should be considered in specific design disciplines, such as mechanical systems and electrical systems. These good practices are based on specific experiences in the design of nuclear facilities by design engineers with related experience. This part of the Design Considerations Handbook contains five sections, each of which applies to a particular engineering discipline.

  3. Preface Learning Design Handbook

    NARCIS (Netherlands)

    Koper, Rob; Tattersall, Colin; (eds)

    2005-01-01

    Provided as full text at Springer Online (also here). Koper, R. & Tattersall, C. (2005). Preface. In: Koper, R. & Tattersall, C., Learning Design: A Handbook on Modelling and Delivering Networked Education and Training (pp. 3-20). Berlin-Heidelberg: Springer Verlag.

  4. HVAC systems design handbook

    CERN Document Server

    Haines, Roger W

    2010-01-01

    Thoroughly updated with the latest codes, technologies, and practices, this all-in-one resource provides details, calculations, and specifications for designing efficient and effective residential, commercial, and industrial HVAC systems. HVAC Systems Design Handbook, Fifth Edition, features new information on energy conservation and computer usage for design and control, as well as the most recent International Code Council (ICC) Mechanical Code requirements. Detailed illustrations, tables, and essential HVAC equations are also included. This comprehensive guide contains everything you need to design, operate, and maintain peak-performing HVAC systems.

  5. Steel designers' handbook

    CERN Document Server

    Gorenc, Branko; Tinyou, Ron

    2012-01-01

    The Revised 7th Edition of Steel Designers' Handbook is an invaluable tool for all practising structural, civil and mechanical engineers as well as engineering students at university and TAFE in Australia and New Zealand. It has been prepared in response to changes in the design Standard AS 4100, the structural Design Actions Standards, AS /ANZ 1170, other processing Standards such as welding and coatings, updated research as well as feedback from users. This edition is based on Australian Standard (AS) 4100: 1998 and subsequent amendments. The worked numerical examples in the book have been e

  6. Mechanical design engineering handbook

    CERN Document Server

    Childs, Peter R N

    2013-01-01

    Mechanical Design Engineering Handbook is a straight-talking and forward-thinking reference covering the design, specification, selection, use and integration of machine elements fundamental to a wide range of engineering applications. Develop or refresh your mechanical design skills in the areas of bearings, shafts, gears, seals, belts and chains, clutches and brakes, springs, fasteners, pneumatics and hydraulics, amongst other core mechanical elements, and dip in for principles, data and calculations as needed to inform and evaluate your on-the-job decisions. Covering the full spectrum

  7. Heat exchanger design handbook

    CERN Document Server

    Thulukkanam, Kuppan

    2013-01-01

    Completely revised and updated to reflect current advances in heat exchanger technology, Heat Exchanger Design Handbook, Second Edition includes enhanced figures and thermal effectiveness charts, tables, new chapter, and additional topics--all while keeping the qualities that made the first edition a centerpiece of information for practicing engineers, research, engineers, academicians, designers, and manufacturers involved in heat exchange between two or more fluids.See What's New in the Second Edition: Updated information on pressure vessel codes, manufacturer's association standards A new c

  8. Mechanical Design Handbook for Elastomers

    Science.gov (United States)

    Darlow, M.; Zorzi, E.

    1986-01-01

    Mechanical Design Handbook for Elastomers reviews state of art in elastomer-damper technology with particular emphasis on applications of highspeed rotor dampers. Self-contained reference but includes some theoretical discussion to help reader understand how and why dampers used for rotating machines. Handbook presents step-by-step procedure for design of elastomer dampers and detailed examples of actual elastomer damper applications.

  9. Photovoltaic Incentive Design Handbook

    Energy Technology Data Exchange (ETDEWEB)

    Hoff, T. E.

    2006-12-01

    Investments in customer-owned grid-connected photovoltaic (PV) energy systems are growing at a steady pace. This is due, in part, to the availability of attractive economic incentives offered by public state agencies and utilities. In the United States, these incentives have largely been upfront lump payments tied to the system capacity rating. While capacity-based ''buydowns'' have stimulated the domestic PV market, they have been criticized for subsidizing systems with potentially poor energy performance. As a result, the industry has been forced to consider alternative incentive structures, particularly ones that pay based on long-term measured performance. The industry, however, lacks consensus in the debate over the tradeoffs between upfront incentive payments versus longer-term payments for energy delivery. This handbook is designed for agencies and utilities that offer or intend to offer incentive programs for customer-owned PV systems. Its purpose is to help select, design, and implement incentive programs that best meet programmatic goals. The handbook begins with a discussion of the various available incentive structures and then provides qualitative and quantitative tools necessary to design the most appropriate incentive structure. It concludes with program administration considerations.

  10. Transformer and inductor design handbook

    CERN Document Server

    McLyman, Colonel Wm T

    2011-01-01

    With its practical approach to design, Transformer and Inductor Design Handbook, Fourth Edition distinguishes itself from other books by presenting information and guidance that is shaped primarily by the user's needs and point of view. Expanded and revised to address recent industry developments, the fourth edition of this classic reference is re-organized and improved, again serving as a constant aid for anyone seeking to apply the state of the art in transformer and inductor design. Carefully considering key factors such as overall system weight, power conversion efficiency, and cost, the a

  11. Security-by-design handbook.

    Energy Technology Data Exchange (ETDEWEB)

    Snell, Mark Kamerer; Jaeger, Calvin Dell; Scharmer, Carol; Jordan, Sabina Erteza; Tanuma, Koji [Japan Atomic Energy Agency, Tokai-mura, Ibaraki, Japan; Ochiai, Kazuya [Japan Atomic Energy Agency, Tokai-mura, Ibaraki, Japan; Iida, Toru [Japan Atomic Energy Agency, Tokai-mura, Ibaraki, Japan

    2013-01-01

    This document is a draft SecuritybyDesign (SeBD) handbook produced to support the Work Plan of the Nuclear Security Summit to share best practices for nuclear security in new facility design. The Work Plan calls on States to %E2%80%9Cencourage nuclear operators and architect/engineering firms to take into account and incorporate, where appropriate, effective measures of physical protection and security culture into the planning, construction, and operation of civilian nuclear facilities and provide technical assistance, upon request, to other States in doing so.%E2%80%9D The materials for this document were generated primarily as part of a bilateral project to produce a SeBD handbook as a collaboration between the Japan Atomic Energy Agency (JAEA) Nuclear Nonproliferation Science and Technology Center and Sandia National Laboratories (SNL), which represented the US Department Energy (DOE) National Nuclear Security Administration (NNSA) under a Project Action Sheet PASPP04. Input was also derived based on tours of the Savannah River Site (SRS) and Japan Nuclear Fuel Limited (JNFL) Rokkasho Mixed Oxide Fuel fabrication facilities and associated project lessonslearned. For the purposes of the handbook, SeBD will be described as the systemlevel incorporation of the physical protection system (PPS) into a new nuclear power plant or nuclear facility resulting in a PPS design that minimizes the risk of malicious acts leading to nuclear material theft; nuclear material sabotage; and facility sabotage as much as possible through features inherent in (or intrinsic to) the design of the facility. A fourelement strategy is presented to achieve a robust, durable, and responsive security system.

  12. Handbook for Designing MMOD Protection

    Science.gov (United States)

    Arnold, Jim; Christiansen, Eric L.; Davis, Alan; Hyde, James; Lear, Dana; Liou, J.C.; Lyons, Frankel; Prior, Thomas; Studor, George; Ratliff, Martin; hide

    2009-01-01

    Spacecraft are subject to micro-meteoroid and orbital debris (MMOD) impact damage which have the potential to degrade performance, shorten the mission, or result in catastrophic loss of the vehicle. Specific MMOD protection requirements are established by NASA for each spacecraft early in the program/project life, to ensure the spacecraft meets desired safety and mission success goals. Both the design and operations influences spacecraft survivability in the MMOD environment, and NASA considers both in meeting MMOD protection requirements. The purpose of this handbook is to provide spacecraft designers and operations personnel with knowledge gained by NASA in implementing effective MMOD protection for the International Space Station, Space Shuttle, and various science spacecraft. It has been drawn from a number of previous publications [10-14], as well as new work. This handbook documents design and operational methods to reduce MMOD risk. In addition, this handbook describes tools and equations needed to design proper MMOD protection. It is a living report, in that it will be updated and re-released periodically in future with additional information. Providing effective and efficient MMOD protection is essential for ensuring safe and successful operations of spacecraft and satellites. A variety of shields protect crew modules, external pressurized vessels and critical equipment from MMOD on the International Space Station (ISS). Certain Space Shuttle Orbiter vehicle systems are hardened from MMOD impact, and operational rules are established to reduce the risk from MMOD (i.e., flight attitudes are selected and late inspection of sensitive thermal protection surfaces are conducted to reduce MMOD impacts). Science spacecraft include specific provisions to meet MMOD protection requirements in their design (for example, Stardust & GLAST). Commercial satellites such as Iridium and Bigelow Aerospace Genesis spacecraft incorporate MMOD protection. The development of low

  13. Fatigue design 1998

    Energy Technology Data Exchange (ETDEWEB)

    Marquis, G.; Solin, J. [eds.] [VTT Manufacturing Technology, Espoo (Finland)

    1998-12-31

    These preprints contain the presentations to be delivered at the Fatigue Design 1998 symposium held on May 26-29, 1998 in Espoo. Fatigue Design 1998 is the tenth in a series of VTT symposia addressing the challenge of fatigue of materials, components and structures. Previous international events were in 1992 and 1995. The key theme of the current meeting is `RELIABILITY`. The two volumes (VTT symposium 181-182) represent 56 contributions by authors representing 26 countries. Emphasis has been given to application oriented research topics that report new technologies, new uses of existing methods and case studies. The objective of the symposium is to bring together researchers and engineers to share experiences and new innovations in designing reliable components to resist alternating loads. (orig.)

  14. Handbook factory planning and design

    CERN Document Server

    Wiendahl, Hans-Peter; Nyhuis, Peter

    2015-01-01

    This handbook introduces a methodical approach and pragmatic concept for the planning and design of changeable factories that act in strategic alliances to supply the ever-changing needs of the global market. In the first part, the change drivers of manufacturing enterprises and the resulting new challenges are considered in detail with focus on an appropriate change potential. The second part concerns the design of the production facilities and systems on the factory levels work place, section, building and site under functional, organisational, architectural and strategic aspects keeping in mind the environmental, health and safety aspects including corporate social responsibility. The third part is dedicated to the planning and design method that is based on a synergetic interaction of process and space. The accompanying project management of the planning and construction phase and the facility management for the effective utilization of the built premises close the book. -        Concise overview o...

  15. 3 GeV Injector Design Handbook

    Energy Technology Data Exchange (ETDEWEB)

    Wiedemann, H.; /SLAC, SSRL

    2009-12-16

    This Design Handbook is intended to be the main reference book for the specifications of the 3 GeV SPEAR booster synchrotron project. It is intended to be a consistent description of the project including design criteria, key technical specifications as well as current design approaches. Since a project is not complete till it's complete changes and modifications of early conceptual designs must be expected during the duration of the construction. Therefore, this Design Handbook is issued as a loose leaf binder so that individual sections can be replaced as needed. Each page will be dated to ease identification with respect to latest revisions. At the end of the project this Design Handbook will have become the 'as built' reference book of the injector for operations and maintenance personnel.

  16. Design Prepation - by means of a Design Handbook

    DEFF Research Database (Denmark)

    Mortensen, Niels Henrik

    1998-01-01

    " between the product and the life phase systems, i.e. the systems which gradually realise the product life, e.g. a production, transport, service and sales system. In co-operation with a Danish company and a sub supplier a prototype internet based design handbook has been developed. Experiences from......This paper describes an internet based design handbook, which when applied in design will contribute to a higher degree of design preparation in design and product development. In the design handbook data have been structured in three main classes: product, production system and so-called "meetings...... preliminary application are positive and indicate that it will be profitable for the company to develop a full scale application of a design handbook....

  17. Automotive stamped part fatigue design

    Directory of Open Access Journals (Sweden)

    Caudoux Mélanie

    2014-06-01

    Full Text Available Fatigue design of automotive axle parts is of prior concern because of these are high safety parts and they are expected to drive the overall vehicle mass reduction. In this framework, the stamping process is widely used to form axle parts, before assembling them by welding. Consequently, the mechanical and physical characteristics of the blank sheet are modified, having a strong influence on the fatigue behavior. In this paper, we address the consequences of the stamped process on the fatigue design and how they may be effectively taken into account in the automotive industry. Actually, the coupling between the stamping process and the fatigue design is under development at PSA Peugeot Citroën Company since several years. Such an analysis deals with some major topics: thickness variation, plastic hardening and deformation, and residual stress. All of these ingredients result in fatigue criteria evolutions: it is important to stress that the stamping process can have advantageous or disadvantageous consequences on the fatigue design. This is here highlighted on some examples, dealing with front and rear axles.

  18. A handbook for solar central receiver design

    Energy Technology Data Exchange (ETDEWEB)

    Falcone, P.K.

    1986-12-01

    This Handbook describes central receiver technology for solar thermal power plants. It contains a description and assessment of the major components in a central receiver system configured for utility scale production of electricity using Rankine-cycle steam turbines. It also describes procedures to size and optimize a plant and discussed examples from recent system analyses. Information concerning site selection criteria, cost estimation, construction, and operation and maintenance is also included, which should enable readers to perform design analyses for specific applications.

  19. Helicopter Fatigue Design Guide

    Science.gov (United States)

    1983-11-01

    de nouveaux materiaux ou technologies accentue I’importance que presente pour les forces de I’O.T.A.N. ce probleme de la maitrise des phenomenes de...fatigue interessant les helicopteres. La commission Structures et Materiaux de I’AGARD a ete conduite a proposer et developper une serie de reflexions...service life for the suspension components due to their vulnerabihty to darnage at high speeds. Spectrum No. 2 led to limitations being applied to

  20. Hypermedia support for engineering design systems: Application to fatigue analysis

    Science.gov (United States)

    Saeaeski, Juha; Sipilae, Sisko; Marquis, Gary

    1992-12-01

    The possibilities of using hypermedia for supporting engineering design systems are discussed. The application selected to test the hypermedia ideas was fatigue analysis. In addition, the possibility of combining hypermedia and expert system ideas into a fatigue expert system is reported. Hypermedia's underlying notion of linking nodes of information and its capability to handle these information entities stored appear to be well suited for engineering system support systems, especially in those engineering design systems where there exists a great demand for representing graphical information in a convenient way. This can be realized using hypermedia tools that are based on hypermedia techniques. The resulting fatigue handbook covers only part of the hypermedia's possibilities. The development of a prototype application indicates the efficiency of a hypermedia tool to create an electronic manual.

  1. Handbook of Human Factors in Web Design

    CERN Document Server

    Vu, Kim-Phuong L

    2011-01-01

    The Handbook of Human Factors in Web Design covers basic human factors issues relating to screen design, input devices, and information organization and processing, as well as addresses newer features which will become prominent in the next generation of Web technologies. These include multimodal interfaces, wireless capabilities, and agents that can improve convenience and usability. Written by leading researchers and/or practitioners in the field, this volume reflects the varied backgrounds and interests of individuals involved in all aspects of human factors and Web design and includes chap

  2. Logic designer's handbook circuits and systems

    CERN Document Server

    Parr, E A

    2013-01-01

    Easy-to-read, but nonetheless thorough, this book on digital circuits is for use by students and engineers, and is a readily accessible source of data on devices in the TTL and CMOS families. The book is written to be used as a Designer's Handbook and will spend its days on the designer's bench rather than their bookshelf. The basic theory is explained and then supported with specific practical examples.* Revised, enlarged, reduced price edition * Easy-to-read, jargon free book suitable for professionals and students * Plenty of basic theory and practical information * Based on authors practi

  3. Primary battery design and safety guidelines handbook

    Science.gov (United States)

    Bragg, Bobby J.; Casey, John E.; Trout, J. Barry

    1994-12-01

    This handbook provides engineers and safety personnel with guidelines for the safe design or selection and use of primary batteries in spaceflight programs. Types of primary batteries described are silver oxide zinc alkaline, carbon-zinc, zinc-air alkaline, manganese dioxide-zionc alkaline, mercuric oxide-zinc alkaline, and lithium anode cells. Along with typical applications, the discussions of the individual battery types include electrochemistry, construction, capacities and configurations, and appropriate safety measures. A chapter on general battery safety covers hazard sources and controls applicable to all battery types. Guidelines are given for qualification and acceptance testing that should precede space applications. Permissible failure levels for NASA applications are discussed.

  4. Designer's handbook of instrumentation and control circuits

    CERN Document Server

    Carr, Joseph J

    1991-01-01

    Here is a comprehensive, practical guide to the entire process of analog instrumentation and control, from sensor input to data conversion circuitry and final output. This readable handbook avoids complex mathematical treatments, instead taking an applications-oriented approach and presenting many sample circuits and concrete examples. It is an essential reference for engineers and high-level technicians in a variety of scientific and engineering fields--anywhere data is collected electronically and where such data is used to control physical processes.Key Features* Covers design o

  5. Audio power amplifier design handbook

    CERN Document Server

    Self, Douglas

    2013-01-01

    This book is essential for audio power amplifier designers and engineers for one simple reason...it enables you as a professional to develop reliable, high-performance circuits. The Author Douglas Self covers the major issues of distortion and linearity, power supplies, overload, DC-protection and reactive loading. He also tackles unusual forms of compensation and distortion produced by capacitors and fuses. This completely updated fifth edition includes four NEW chapters including one on The XD Principle, invented by the author, and used by Cambridge Audio. Cro

  6. Hybrid microcircuit technology handbook materials, processes, design, testing and production

    CERN Document Server

    Licari, James J

    1998-01-01

    The Hybrid Microcircuit Technology Handbook integrates the many diverse technologies used in the design, fabrication, assembly, and testing of hybrid segments crucial to the success of producing reliable circuits in high yields. Among these are: resistor trimming, wire bonding, die attachment, cleaning, hermetic sealing, and moisture analysis. In addition to thin films, thick films, and assembly processes, important chapters on substrate selections, handling (including electrostatic discharge), failure analysis, and documentation are included. A comprehensive chapter of design guidelines will

  7. THE HANDBOOK OF BLENDED LEARNING:Global Perspectives, Local Designs

    OpenAIRE

    Reviewed by Alev ATES

    2009-01-01

    THE HANDBOOK OF BLENDED LEARNING:Global Perspectives, Local Designs Curtis J. Bonk (ed.) and Charles R. Graham (ed.), Jay Cross (Foreword),Micheal G. Moore Foreword) ISBN: 978-0-7879-7758-0 Publisher: John Wiley & Sons, Inc. Pfeiffer Pages: 624 March 2006.Reviewed by Alev ATESPhD Student at Curriculum and Instruction,Lecturer at Computer Education and Instructional Technologies,Faculty of Education, Ege University, Izmir, TURKEYBlended learning or blended e-learning sounds like aconfusing ter...

  8. Handbook of VLSI chip design and expert systems

    CERN Document Server

    Schwarz, A F

    1993-01-01

    Handbook of VLSI Chip Design and Expert Systems provides information pertinent to the fundamental aspects of expert systems, which provides a knowledge-based approach to problem solving. This book discusses the use of expert systems in every possible subtask of VLSI chip design as well as in the interrelations between the subtasks.Organized into nine chapters, this book begins with an overview of design automation, which can be identified as Computer-Aided Design of Circuits and Systems (CADCAS). This text then presents the progress in artificial intelligence, with emphasis on expert systems.

  9. Compiler design handbook optimizations and machine code generation

    CERN Document Server

    Srikant, YN

    2003-01-01

    The widespread use of object-oriented languages and Internet security concerns are just the beginning. Add embedded systems, multiple memory banks, highly pipelined units operating in parallel, and a host of other advances and it becomes clear that current and future computer architectures pose immense challenges to compiler designers-challenges that already exceed the capabilities of traditional compilation techniques. The Compiler Design Handbook: Optimizations and Machine Code Generation is designed to help you meet those challenges. Written by top researchers and designers from around the

  10. Dudley's handbook of practical gear design and manufacture

    CERN Document Server

    Radzevich, Stephen P

    2012-01-01

    A unique, single source reference for all aspects of gears, Dudley's Handbook of Practical Gear Design and Manufacture, Second Edition provides comprehensive and consistent information on the design and manufacture of gears for the expert and novice alike. The second edition of this industry standard boasts seven new chapters and appendices as well as a wealth of updates throughout. New chapters and expanded topics include: Gear Types and Nomenclature, Gear Tooth Design, Gear Reactions and Mountings, Gear Vibration, The Evolution of the Gear Art, Novikov Gearing and the Inadequacy of the Term,

  11. Mechanical engineers' handbook, design, instrumentation, and controls

    CERN Document Server

    Kutz, Myer

    2015-01-01

    Full coverage of electronics, MEMS, and instrumentation andcontrol in mechanical engineering This second volume of Mechanical Engineers' Handbookcovers electronics, MEMS, and instrumentation and control, givingyou accessible and in-depth access to the topics you'll encounterin the discipline: computer-aided design, product design formanufacturing and assembly, design optimization, total qualitymanagement in mechanical system design, reliability in themechanical design process for sustainability, life-cycle design,design for remanufacturing processes, signal processing, dataacquisition and dis

  12. Development of a security-by-design handbook.

    Energy Technology Data Exchange (ETDEWEB)

    Olson, David L.; Snell, Mark Kamerer; Iida, Toru (Japan Atomic Energy Agency, Tokai-mura, Ibaraki, Japan); Ochiai, Kazuya (Japan Atomic Energy Agency, Tokai-mura, Ibaraki, Japan); Tanuma, Koji (Japan Atomic Energy Agency, Tokai-mura, Ibaraki, Japan)

    2010-06-01

    There is an increasing awareness that efficient and effective nuclear facility design is best achieved when requirements from the 3S disciplines Safety, Safeguards, and Security - are balanced and intrinsic to the facility design. This can be achieved when policy, processes, methods, and technologies are understood and applied in these areas during all phases of the design process. For the purposes of this paper, Security-by-design will be defined as the system level incorporation of the physical protection system (PPS) into a new or retrofitted nuclear power plant (NPP) or nuclear facility (NF) resulting in intrinsic security. Security-by-design can also be viewed as a framework to achieve robust and durable security systems. This paper reports on work performed to date to create a Security-by-Design Handbook, under a bilateral agreement between the United States and Japan, specifically, a review of physical protection principles and best practices, and a decommissioning to better understand where these principles and practices can be applied. This paper describes physical protection principles and best practices to achieve security-by- design that were gathered from International, Japanese, and U.S. sources. Principles are included for achieving security early in the design process where security requirements are typically less costly and easier to incorporate. The paper then describes a generic design process that covers the entire facility lifecycle from scoping and planning of the project to decommissioning and decontamination. Early design process phases, such as conceptual design, offer opportunities to add security features intrinsic to the facility design itself. Later phases, including design engineering and construction, are important for properly integrating security features into a coherent design and for planning for and assuring the proper performance of the security system during the operation and decommissioning of the facility. The paper also

  13. CMOS bulk-metal design handbook

    Science.gov (United States)

    Edge, T. M.

    1978-01-01

    User's guide describes techniques for generating precision mask artwork for complex CMOS integrated circuits, starting from logic diagram. Techniques are based on standard-cell approach. Guide also includes user guidelines for designing efficient CMOS arrays.

  14. Subsea rigid jumper design and ⅤⅣ fatigue evaluation

    Institute of Scientific and Technical Information of China (English)

    Wang Jun

    2013-01-01

    The purpose of this paper is to present a design procedure for subsea rigid jumper system including strength and fatigue analysis.Special attention gives to a methodology based on DNV-RP-F105 to evaluate jumper fatigue damage caused by vortex induced vibration (ⅤⅣ).Jumper strength analysis is to determine the jumper configuration which can accommodate various load conditions and all possible span lengths driven by installation tolerances of connected subsea structures.Fatigue analysis includes two parts:thermal fatigue and ⅤⅣ fatigue.This paper presents the procedure of ⅤⅣ fatigue damage calculation.An example is given to illustrate above methodologies.

  15. Reliability based fatigue design and maintenance procedures

    Science.gov (United States)

    Hanagud, S.

    1977-01-01

    A stochastic model has been developed to describe a probability for fatigue process by assuming a varying hazard rate. This stochastic model can be used to obtain the desired probability of a crack of certain length at a given location after a certain number of cycles or time. Quantitative estimation of the developed model was also discussed. Application of the model to develop a procedure for reliability-based cost-effective fail-safe structural design is presented. This design procedure includes the reliability improvement due to inspection and repair. Methods of obtaining optimum inspection and maintenance schemes are treated.

  16. Handbook on advanced design and manufacturing technologies for biomedical devices

    CERN Document Server

    2013-01-01

    The last decades have seen remarkable advances in computer-aided design, engineering and manufacturing technologies, multi-variable simulation tools, medical imaging, biomimetic design, rapid prototyping, micro and nanomanufacturing methods and information management resources, all of which provide new horizons for the Biomedical Engineering fields and the Medical Device Industry. Handbook on Advanced Design and Manufacturing Technologies for Biomedical Devices covers such topics in depth, with an applied perspective and providing several case studies that help to analyze and understand the key factors of the different stages linked to the development of a novel biomedical device, from the conceptual and design steps, to the prototyping and industrialization phases. Main research challenges and future potentials are also discussed, taking into account relevant social demands and a growing market already exceeding billions of dollars. In time, advanced biomedical devices will decisively change methods and resu...

  17. Passive-solar-design handbook for Wisconsin

    Energy Technology Data Exchange (ETDEWEB)

    Steege, D.; Keiffer, B.; Tipler, G.

    1981-12-01

    The principles, definitions, and detailed calculations needed to design and evaluate passive solar systems are presented. The types of systems, principles of heat loss and heat gain, definitions of relevant terms and concepts, and the initial calculations later used to determine the annual solar savings fraction are introduced. The detailed climatic data, modification curves, and monthly solar savings fractions for various Wisconsin locations are given that will be used in the calculations. (LEW)

  18. Propagation handbook for wireless communication system design

    CERN Document Server

    Crane, Robert K

    2003-01-01

    PROPAGATION PHENOMENA AFFECTING WIRELESS SYSTEMS Types of SystemsDesign Criteria Antenna Considerations Propagation Effects Propagation Models Model Verification Statistics and RiskList of Symbols ReferencesPROPAGATION FUNDAMENTALSMaxwell's EquationsPlane Waves Spherical Waves Reflection and Refraction Geometrical OpticsRay TracingScalar Diffraction Theory Geometrical Theory of Diffraction List of Symbols ReferencesABSORPTION Molecular Absorption Absorption on a Slant Path ACTS Statistics List of Symbols ReferencesREFRACTION Ray BendingPath Delay ScintillationList of Symbols ReferencesATTENUAT

  19. Brazing handbook

    CERN Document Server

    American Welding Society

    2007-01-01

    By agreement between the American Welding Society C3 Committee on Brazing and Soldering and the ASM Handbook Committee, the AWS Brazing Handbook has been formally adopted as part of the ASM Handbook Series. Through this agreement, the brazing content in the ASM Handbook is significantly updated and expanded. The AWS Brazing Handbook, 5th Edition provides a comprehensive, organized survey of the basics of brazing, processes, and applications. Addresses the fundamentals of brazing, brazement design, brazing filler metals and fluxes, safety and health, and many other topics. Includes new chapters on induction brazing and diamond brazing.

  20. Fatigue Reliability and Calibration of Fatigue Design Factors for Offshore Wind Turbines

    DEFF Research Database (Denmark)

    Dominguez, Sergio Marquez; Sørensen, John Dalsgaard

    2012-01-01

    Consequences of failure of offshore wind turbines (OWTs) are in general lower than consequences of failure of, e.g., oil & gas platforms. It is reasonable that lower fatigue design factors can be applied for fatigue design of OWTs when compared to other fixed offshore structures. Calibration...... is discussed and results are presented for calibrated optimal fatigue design factors. Further, the influence of inspections is considered in order to extend and maintain a given target safety level....... of appropriate partial safety factors/Fatigue Design Factors (FDF) for steel substructures for OWTs is the scope of this paper. A reliability-based approach is used and a probabilistic model has been developed, where design and limit state equations are established for fatigue failure. The strength and load...

  1. The Green Studio Handbook: Environmental Strategies for Schematic Design

    Directory of Open Access Journals (Sweden)

    Alison G. Kwok

    2012-11-01

    Full Text Available In design studio projects we often see schemes with inspired, yet unvalidated, gestural sketches related to wishful green strategies. Yellow and blue magic arrows represent hypotheses about the behavior of daylight and/or air flow in and about buildings. This paper provides an overview of The Green Studio Handbook, recently published as a resource for designers seeking clear guidelines for integrating green design strategies into the conceptual and schematic phases of design. The book contains a discussion of the integration of green strategies and how building form, orientation, and spatial layout are critical to the proper performance of certain green strategies; 40 green design strategies in six broad topic areas, each providing acatalog of information for common strategies that must be implemented at the schematic design phase; and nine case studies that show how various green strategies work together in a finished building. This paper provides excerpts of several design strategies and one case study and suggests a variety of ways that the book may be used.Keywords: green design, case studies, education, schematic design

  2. Muscle fatigue based evaluation of bicycle design.

    Science.gov (United States)

    Balasubramanian, V; Jagannath, M; Adalarasu, K

    2014-03-01

    Bicycling posture leads to considerable discomfort and a variety of chronic injuries. This necessitates a proper bicycle design to avoid injuries and thereby enhance rider comfort. The objective of this study was to investigate the muscle activity during cycling on three different bicycle designs, i.e., rigid frame (RF), suspension (SU) and sports (SP) using surface electromyography (sEMG). Twelve male volunteers participated in this study. sEMG signals were acquired bilaterally from extensor carpi radialis (ECR), trapezius medial (TM), latissimus dorsi medial (LDM) and erector spinae (ES), during 30 min of cycling on each bicycle and after cycling. Time domain (RMS) and frequency domain (MPF) parameters were extracted from acquired sEMG signals. From the sEMG study, it was found that the fatigue in right LDM and ES were significantly (p bicycle. This was corroborated by a psychophysical assessment based on RBG pain scale. The study also showed that there was a significantly lesser fatigue with the SU bicycle than the RF and SP bicycles.

  3. Handbook of modern sensors physics, designs, and applications

    CERN Document Server

    Fraden, Jacob

    2016-01-01

    This book presents a comprehensive and up-to-date account of the theory (physical principles), design, and practical implementations of various sensors for scientific, industrial, and consumer applications. This latest edition focuses on the sensing technologies driven by the expanding use of sensors in mobile devices. These new miniature sensors will be described, with an emphasis on smart sensors which have embedded processing systems. The chapter on chemical sensors has also been expanded to present the latest developments. Digital systems, however complex and intelligent they may be, must receive information from the outside world that is generally analog and not electrical. Sensors are interface devices between various physical values and the electronic circuits that "understand" only a language of moving electrical charges. In other words, sensors are the eyes, ears, and noses of silicon chips. Unlike other books on sensors, the Handbook of Modern Sensors is organized according to the measured variables...

  4. The radioactive materials packaging handbook: Design, operations, and maintenance

    Energy Technology Data Exchange (ETDEWEB)

    Shappert, L.B.; Bowman, S.M. [Oak Ridge National Lab., TN (United States); Arnold, E.D. [Lockheed Martin Energy Systems, Oak Ridge, TN (United States)] [and others

    1998-08-01

    As part of its required activities in 1994, the US Department of Energy (DOE) made over 500,000 shipments. Of these shipments, approximately 4% were hazardous, and of these, slightly over 1% (over 6,400 shipments) were radioactive. Because of DOE`s cleanup activities, the total quantities and percentages of radioactive material (RAM) that must be moved from one site to another is expected to increase in the coming years, and these materials are likely to be different than those shipped in the past. Irradiated fuel will certainly be part of the mix as will RAM samples and waste. However, in many cases these materials will be of different shape and size and require a transport packaging having different shielding, thermal, and criticality avoidance characteristics than are currently available. This Handbook provides guidance on the design, testing, certification, and operation of packages for these materials.

  5. Handbook of reflector antennas and feed systems v.1 theory and design of reflectors

    CERN Document Server

    Sharma, Satish K; Shafai, Lotfollah

    2013-01-01

    This is the first truly comprehensive and most up-to-date handbook available on modern reflector antennas and feed sources for diversified space and ground applications. There has never been such an all-encompassing reflector handbook in print, and no currently available title offers coverage of such recent research developments. The Handbook consists of three volumes. Volume I provides a unique combination of theoretical underpinnings with design considerations and techniques. The need for knowledge in reflector antennas has grown steadily over the last two decades due to increased use in spa

  6. Fatigue Reliability and Calibration of Fatigue Design Factors for Offshore Wind Turbines

    Directory of Open Access Journals (Sweden)

    Sergio Márquez-Domínguez

    2012-06-01

    Full Text Available Consequences of failure of offshore wind turbines (OWTs is in general lower than consequences of failure of, e.g., oil & gas platforms. It is reasonable that lower fatigue design factors can be applied for fatigue design of OWTs when compared to other fixed offshore structures. Calibration of appropriate partial safety factors/Fatigue Design Factors (FDF for steel substructures for OWTs is the scope of this paper. A reliability-based approach is used and a probabilistic model has been developed, where design and limit state equations are established for fatigue failure. The strength and load uncertainties are described by stochastic variables. SN and fracture mechanics approaches are considered for to model the fatigue life. Further, both linear and bi-linear SN-curves are formulated and various approximations are investigated. The acceptable reliability level for fatigue failure of OWTs is discussed and results are presented for calibrated optimal fatigue design factors. Further, the influence of inspections is considered in order to extend and maintain a given target safety level.

  7. A New Handbook for the Development of Space Vehicle Terrestrial Environment Design Requirements.

    Science.gov (United States)

    Johnson, Dale L.; Vaughan, William W.

    2008-01-01

    A new NASA document entitled "Terrestrial Environment (Climatic) Criteria Handbook for Use in Aerospace Vehicle Development (NASA-HDBK-1001A) has been developed. The Handbook provides terrestrial environment information, data bases, models, recommendations, etc. for use in the design, development, trade studies, testing, and mission analyses for space (or launch) .vehicles. This document is organized into fourteen specific natural environment disciplines of which some are winds, atmospheric models, thermal radiation, precipitation-for-icing, cloud cover, atmospheric electricity, geologic hazards, toxic chemical release by propulsion systems, and sea state. Atmospheric phenomena play a significant role in the design and flight of aerospace vehicles and in the integrity of the associated aerospace systems and structures. Environmental design criteria guidelines in this document are based on measurements and observations of atmospheric and climatic phenomena relative to various aerospace development, operational, and vehicle launch locations. The natural environment criteria guidelines data presented in this Handbook were formulated based on discussions with and requests from engineers involved in aerospace vehicle development and operations. Therefore, they represent responses to actual engineering problems and are not just a general compilation of environmental data. The Handbook addresses the basis for the information presented, the interpretations of the terrestrial environment guideline given in the Handbook, and its application to the development of aerospace vehicle design requirements. Specific examples of the Handbook content and associated "lessons lenmed" are given in this paper.

  8. Radon attenuation handbook for uranium mill tailings cover design

    Energy Technology Data Exchange (ETDEWEB)

    Rogers, V.C.; Nielson, K.K.; Kalkwarf, D.R.

    1984-04-01

    This handbook has been prepared to facilitate the design of earthen covers to control radon emission from uranium mill tailings. Radon emissions from bare and covered uranium mill tailings can be estimated from equations based on diffusion theory. Basic equations are presented for calculating surface radon fluxes from covered tailings, or alternately, the cover thicknesses required to satisfy a given radon flux criterion. Also described is a computer code, RAECOM, for calculating cover thicknesses and surface fluxes. Methods are also described for measuring diffusion coefficients for radon, or for estimating them from empirical correlations. Since long-term soil moisture content is a critical parameter in determining the value of the diffusion coefficient, methods are given for estimating the long-term moisture contents of soils. The effects of cover defects or advection are also discussed and guidelines are given for determining if they are significant. For most practical cases, advection and cover defect effects on radon flux can be neglected. Several examples are given to demonstrate cover design calculations, and an extensive list of references is included. 63 references, 18 figures, 6 tables.

  9. Partial Safety Factors for Fatigue Design of Wind Turbine Blades

    DEFF Research Database (Denmark)

    Toft, Henrik Stensgaard; Sørensen, John Dalsgaard

    2010-01-01

    In the present paper calibration of partial safety factors for fatigue design of wind turbine blades is considered. The stochastic models for the physical uncertainties on the material properties are based on constant amplitude fatigue tests and the uncertainty on Miners rule for linear damage...

  10. Physical and Model Uncertainty for Fatigue Design of Composite Material

    DEFF Research Database (Denmark)

    Toft, Henrik Stensgaard; Sørensen, John Dalsgaard

    The main aim of the present report is to establish stochastic models for the uncertainties related to fatigue design of composite materials. The uncertainties considered are the physical uncertainty related to the static and fatigue strength and the model uncertainty related to Miners rule...

  11. Probabilistic Fatigue Design of Composite Material for Wind Turbine Blades

    DEFF Research Database (Denmark)

    Toft, Henrik Stensgaard; Sørensen, John Dalsgaard

    2011-01-01

    is also estimated based on test results. The results show that Miners rule gives a non-conservative estimate on the accumulated damage at failure. The reliability of a wind turbine blade is estimated for both out-of-plane and in-plane loading using three different design standards. The estimated annual......In the present paper a probabilistic design approach to fatigue design of wind turbine blades is presented. The physical uncertainty on the fatigue strength for composite material is estimated using public available fatigue tests. Further, the model uncertainty on Miner rule for damage accumulation...

  12. Statistical fatigue experiment design in medium density fiberboard

    Directory of Open Access Journals (Sweden)

    Martínez Espinosa Mariano

    2000-01-01

    Full Text Available Medium Density Fiberboard (MDF is a wood-based composite widely employed in several industrial applications, in addition to its use in structures subjected to dynamic loads. Its fatigue-related aspects, however, have been consistently ignored. This work proposes to study fatigue in MDF, including the following factors: the basic concepts of MDF and fatigue and the statistical design of fatigue experiments in MDF, with the purpose of obtaining accurate information for analysis by means of statistical methods. The results of our tests revealed that the statistical model is suitable to fit the number of cycles in intermediary S and f levels and to determine the levels of the factors that maximize the total number of cycles to failure. It was also found that the proposed design is of great practical interest for fatigue strength in the tension in wood and wood derivatives.

  13. Nuclear air cleaning handbook. Design, construction, and testing of high-efficiency air cleaning systems for nuclear application

    Energy Technology Data Exchange (ETDEWEB)

    Burchsted, C.A.; Kahn, J.E.; Fuller, A.B.

    1976-01-01

    The handbook is a revision of ORNL/NSIC-65. The purposes of the handbook are to summarize available information in a manner that is useful to the designer, to point out shortcomings in design and construction practice, and to provide guides and recommendations for the design of future systems. (TFD)

  14. Recommendations for fatigue design of welded joints and components

    CERN Document Server

    Hobbacher, A F

    2016-01-01

    This book provides a basis for the design and analysis of welded components that are subjected to fluctuating forces, to avoid failure by fatigue. It is also a valuable resource for those on boards or commissions who are establishing fatigue design codes. For maximum benefit, readers should already have a working knowledge of the basics of fatigue and fracture mechanics. The purpose of designing a structure taking into consideration the limit state for fatigue damage is to ensure that the performance is satisfactory during the design life and that the survival probability is acceptable. The latter is achieved by the use of appropriate partial safety factors. This document has been prepared as the result of an initiative by Commissions XIII and XV of the International Institute of Welding (IIW).

  15. Engineering Design Handbook. Helicopter Engineering. Part One. Preliminary Design

    Science.gov (United States)

    1974-08-30

    by estimation, compound helicopter performance, to think of the air- plots of effective lift and drag areas and pitching mo- craft as a biplane having...stncural design problems but may produce loads that where are critikal locally. A = presented arms ft’ Ca = drag coefficient, dimensionless F• V = wind speed...groups is to be provided in accordance with MIL-STD- 1374, Part I. The useful load condition shall be as I. W. H. Ballhaus, Clear Design Thinking Using

  16. Passive solar design handbook. Volume 3: Passive solar design analysis

    Science.gov (United States)

    Jones, R. W.; Bascomb, J. D.; Kosiewicz, C. E.; Lazarus, G. S.; McFarland, R. D.; Wray, W. O.

    1982-07-01

    Simple analytical methods concerning the design of passive solar heating systems are presented with an emphasis on the average annual heating energy consumption. Key terminology and methods are reviewed. The solar load ratio (SLR) is defined, and its relationship to analysis methods is reviewed. The annual calculation, or Load Collector Ratio (LCR) method, is outlined. Sensitivity data are discussed. Information is presented on balancing conservation and passive solar strategies in building design. Detailed analysis data are presented for direct gain and sunspace systems, and details of the systems are described. Key design parameters are discussed in terms of their impact on annual heating performance of the building. These are the sensitivity data. The SLR correlations for the respective system types are described. The monthly calculation, or SLR method, based on the SLR correlations, is reviewed. Performance data are given for 9 direct gain systems and 15 water wall and 42 Trombe wall systems.

  17. Passive solar design handbook. Volume III. Passive solar design analysis

    Energy Technology Data Exchange (ETDEWEB)

    Jones, R.W.; Balcomb, J.D.; Kosiewicz, C.E.; Lazarus, G.S.; McFarland, R.D.; Wray, W.O.

    1982-07-01

    Simple analytical methods concerning the design of passive solar heating systems are presented with an emphasis on the average annual heating energy consumption. Key terminology and methods are reviewed. The solar load ratio (SLR) is defined, and its relationship to analysis methods is reviewed. The annual calculation, or Load Collector Ratio (LCR) method, is outlined. Sensitivity data are discussed. Information is presented on balancing conservation and passive solar strategies in building design. Detailed analysis data are presented for direct gain and sunspace systems, and details of the systems are described. Key design parameters are discussed in terms of their impact on annual heating performance of the building. These are the sensitivity data. The SLR correlations for the respective system types are described. The monthly calculation, or SLR method, based on the SLR correlations, is reviewed. Performance data are given for 9 direct gain systems and 15 water wall and 42 Trombe wall systems. (LEW)

  18. Radiation design criteria handbook. [design criteria for electronic parts applications

    Science.gov (United States)

    Stanley, A. G.; Martin, K. E.; Douglas, S.

    1976-01-01

    Radiation design criteria for electronic parts applications in space environments are provided. The data were compiled from the Mariner/Jupiter Saturn 1977 electronic parts radiation test program. Radiation sensitive device types were exposed to radiation environments compatible with the MJS'77 requirements under suitable bias conditions. A total of 189 integrated circuits, transistors, and other semiconductor device types were tested.

  19. Reformation Design of Training. A Handbook with a Behavioral Digital Approach.

    Science.gov (United States)

    Hamdan, Mohamed Ziad

    This handbook, which presents a design-based approach to training, leads training professionals through a process for developing employee training programs based on a behavioral digital approach. (The design approach is a scientific methodology built on three principles: the systematization, behaviorism, and quantification of training.) The…

  20. Partial Safety Factors for Fatigue Design of Wind Turbine Blades

    DEFF Research Database (Denmark)

    Toft, Henrik Stensgaard; Sørensen, John Dalsgaard

    In the present paper calibration of partial safety factors for fatigue design of wind turbine blades is considered. The stochastic models for the physical uncertainties on the material properties are based on constant amplitude fatigue tests and the uncertainty on Miners rule for linear damage...... from rainflow-counting of simulated time series for a 5MW reference wind turbine [1]. A possible influence of a complex stress state in the blade is not taken into account and only longitudinal stresses are considered....

  1. Improved Fatigue and Damage Tolerant Material Design for Aerospace Industry

    Institute of Scientific and Technical Information of China (English)

    Yigeng XU; Jiang CHEN; Jianmin LI; Zefei ZHU

    2005-01-01

    Various micro-mechanical and micro-structural influences on fatigue crack growth resistance of the material have been investigated over the years. It is widely recognized that resistance to fatigue crack growth can be differentiated into ‘intrinsic’and ‘extrinsic’.The separation of intrinsic and extrinsic crack growth resistance has constituted a major theme of fatigue research in the last 30 years, with the concept of crack closure or crack tip shielding being used to rationalize a wide range of micro-structural and mechanical influences on fatigue crack growth behavior. An accurately quantitative understanding of intrinsic and extrinsic effects on crack growth is essential to directed alloy design for improved fatigue resistance, and/or improved structural service life. This paper presents a compliance-basedcrack closure measurement method and a multi-mechanism based analytical model for the separation of intrinsic and extrinsic material fatigue resistance, with application in characterizing the fatigue performance of two high strength damage tolerant aidrame Al alloys.

  2. Fatigue design of hydraulic turbine runners

    Energy Technology Data Exchange (ETDEWEB)

    Huth, Hans-Joerg

    2005-07-01

    Turbine runners experience start-stop cycles and vibration cycles. Cracks initiated from service or manufacturing defects and propagated by start-stop cycles become critical when the stress intensity range due to vibrational loading exceeds the threshold for fatigue crack growth. In Francis turbine runners, semi-elliptical surface cracks tend to propagate from the quarter-circular transition of the welded T-joint transition between the blade and the band or crown. Assuming a crack to grow under a constant stress amplitude equal to that at the most highly loaded location at the welded joint between the blade and the band or crown of a Francis turbine runner yields a conservative estimate of the life of the runner. A more accurate prediction of fatigue life is obtained by considering the growth of a crack in the real, inhomogeneous stress field. For an idealised T-joint under pure bending, the stress field has been determined by means of plane strain finite element analysis. Finite element models of the entire Francis runner are built with respect to the calculation of fluid dynamic properties. Since in these models geometry transitions are modelled as a sharp notch, both a finite and a zero transition radius have been modelled, and the influence of the mesh size on the maximum stress has been investigated. For relatively small cracks, it is shown that the structural component geometry does not remarkably influence the stress intensity factor values, provided that the stress field in the vicinity of the crack is approximately the same. Therefore, in order to simplify the stress intensity factor retrieval and to generate a solution of extended applicability, a cracked finite-thickness plate is examined instead of the actual T-joint geometry. The stress intensity factors along the front of a semi-elliptical surface crack in such a plate are determined by means of an analysis using finite quarter-point wedge elements for different elementary loading conditions that can

  3. Multiaxial and thermomechanical fatigue considerations in damage tolerant design

    Science.gov (United States)

    Leese, G. E.; Bill, R. C.

    1985-01-01

    In considering damage tolerant design concepts for gas turbine hot section components, several challenging concerns arise: Complex multiaxial loading situations are encountered; Thermomechanical fatigue loading involving very wide temperature ranges is imposed on components; Some hot section materials are extremely anisotropic; and coatings and environmental interactions play an important role in crack propagation. The effects of multiaxiality and thermomechanical fatigue are considered from the standpoint of their impact on damage tolerant design concepts. Recently obtained research results as well as results from the open literature are examined and their implications for damage tolerant design are discussed. Three important needs required to advance analytical capabilities in support of damage tolerant design become readily apparent: (1) a theoretical basis to account for the effect of nonproportional loading (mechanical and mechanical/thermal); (2) the development of practical crack growth parameters that are applicable to thermomechanical fatigue situations; and (3) the development of crack growth models that address multiple crack failures.

  4. Fatigue design of steel and composite structures Eurocode 3 : design of steel structures, part 1-9 fatigue ; Eurocode 4 : design of composite steel and concrete structures

    CERN Document Server

    Nussbaumer, Alain; Davaine, Laurence

    2012-01-01

    This volume addresses the specific subject of fatigue, a subject not familiar to many engineers, but still relevant for proper and good design of numerous steel structures. It explains all issues related to the subject: Basis of fatigue design, reliability and various verification formats, determination of stresses and stress ranges, fatigue strength, application range and limitations. It contains detailed examples of applications of the concepts, computation methods and verifications.

  5. NASA Space Flight Human System Standard, Volume 2, and HIDH (Human Integration Design Handbook)

    Science.gov (United States)

    Connolly, Janis; Fitts, David; Stroud, Kenneth; Boyer, Jennifer; Holubec, Keith; Tillman, Barry

    2009-01-01

    This viewgraph presentation reports on the review and re-issuance of the NASA Space Flight Human System Standard, Volume 2, and the Human Integration Design Handbook. These standards were last updated in 1995. The target date for the release is September 2009.

  6. NASA Human Integration Design Handbook (HIDH): Revitalization of Space-Related Human Factors, Environmental, and Habitability Data and Design Guidance

    Science.gov (United States)

    Stroud, Kenneth; Pickett, Lynn; Tillman, Barry

    2008-01-01

    This poster presentation reviews the Human Integration Design Handbook (HIDH). It provides guidance and data to aid vehicle / habitat designers in human-system integration It also aids requirements writers in development of human-system integration requirements from SFHSS Standards

  7. THE HANDBOOK OF BLENDED LEARNING:Global Perspectives, Local Designs

    Directory of Open Access Journals (Sweden)

    Reviewed by Alev ATES

    2009-10-01

    Full Text Available THE HANDBOOK OF BLENDED LEARNING:Global Perspectives, Local Designs Curtis J. Bonk (ed. and Charles R. Graham (ed., Jay Cross (Foreword,Micheal G. Moore Foreword ISBN: 978-0-7879-7758-0 Publisher: John Wiley & Sons, Inc. Pfeiffer Pages: 624 March 2006.Reviewed by Alev ATESPhD Student at Curriculum and Instruction,Lecturer at Computer Education and Instructional Technologies,Faculty of Education, Ege University, Izmir, TURKEYBlended learning or blended e-learning sounds like aconfusing term at first since it is relatively a new term fortoday‘s instructors. However, Moore reports that it can betraced as far back as the 1920s which was called ―supervisedcorrespondence study‖. For clarification of the term ―blendedlearning‖ and informing the instructors about its commonpractices worldwide, the book provides readers a comprehensive resource about blended learning. It aims to raise awareness of adopting BL from institutional perspectives of many chapter authors from Australia, Korea, Malaysia, the UK, Canada and South Africa who are distinguished people mostly in instructional technology era. With this book, I guess the editors aim at both showing the big picture at macro level and present micro level examples which provide details of blended learning applications among their strengths and weaknesses. As introduced in the book, one ofthe editors Curtis J. Bonk, a former corporate controller and CPA, is now professor of educational psychology as well as instructional systems technology at Indiana University; the other editor Charles R. Graham is an assistant professor of instructionalpsychology and technology at Brigham Young University with a focus on technologymediated teaching and learning.The book is of eight parts including 39 chapters besides two forewords. Therefore, theorganization of this review is considered to take a holistic view for each parts while emphasizing the original and/or impressive aspects that chapter authors provided

  8. The design of brake fatigue testing system

    OpenAIRE

    2015-01-01

    Brake is used to reduce the operating speed of the machinery equipment or to make it stop. It is essential for vehicles, climbing machines and many fixed equipment in their safety work. Brake tester is an experimental apparatus to measure and analyse the braking performance. Based on the PLC technology and for the purpose of testing brake shoe friction material’s life, this paper designed a virtual brake test platform. In it, inverter were used to control the motor, so that it can load automa...

  9. The design of brake fatigue testing system

    Directory of Open Access Journals (Sweden)

    Huang, Xiaoya

    2015-01-01

    Full Text Available Brake is used to reduce the operating speed of the machinery equipment or to make it stop. It is essential for vehicles, climbing machines and many fixed equipment in their safety work. Brake tester is an experimental apparatus to measure and analyse the braking performance. Based on the PLC technology and for the purpose of testing brake shoe friction material’s life, this paper designed a virtual brake test platform. In it, inverter were used to control the motor, so that it can load automatically and ensure brake drum constant speed output; what is more, closed loop control system were used to control the brake shoe, so that the cylinder pressure keeps stable in the process of dynamic braking.

  10. Student perceptions of clerkship handbooks.

    Science.gov (United States)

    Atherley, Anique; Taylor, Charles

    2017-08-01

    When students transition into new clerkships, it can be useful to provide them with information to assist them in their adjustment to the new social environment. Handbooks could support students by providing information, particularly during clerkship orientation. The authors explored aspects of existing handbooks that students found useful, and sought additional desirable content. During seven semi-structured focus group discussions, 48 final-year medical students discussed their perceptions of six handbooks at the end of their training. Focus group discussions continued until data saturation. Transcripts were thematically analysed. Students appreciated handbooks that were concise, and valued reviewing handbooks with faculty members who could highlight important content. Most students valued and desired content related to assessment, and specifically used handbooks when preparing for examinations. Most students appreciated handbooks that provided study guidance such as a syllabus. Students also appreciated logistical aspects such as a timetable and information on clerkship cultural norms. Students disliked handbooks with vague descriptions of faculty member expectations and students' roles. Students liked, disliked and desired many aspects of clerkship handbooks. The findings of our study could be used when designing handbooks to enhance their perceived value to students. Further research is needed on the impact of handbooks on learning and increasing students' engagement with handbook content. There are many aspects of handbook content and delivery that could be used to improve students' perceptions regarding handbooks. Handbooks could support students by providing information. © 2016 John Wiley & Sons Ltd and The Association for the Study of Medical Education.

  11. Physiological and neurophysiological determinants of postcancer fatigue: design of a randomized controlled trial

    Directory of Open Access Journals (Sweden)

    Prinsen Hetty

    2012-06-01

    Full Text Available Abstract Background Postcancer fatigue is a frequently occurring, severe, and invalidating problem, impairing quality of life. Although it is possible to effectively treat postcancer fatigue with cognitive behaviour therapy, the nature of the underlying (neurophysiology of postcancer fatigue remains unclear. Physiological aspects of fatigue include peripheral fatigue, originating in muscle or the neuromuscular junction; central fatigue, originating in nerves, spinal cord, and brain; and physical deconditioning, resulting from a decreased cardiopulmonary function. Studies on physiological aspects of postcancer fatigue mainly concentrate on deconditioning. Peripheral and central fatigue and brain morphology and function have been studied for patients with fatigue in the context of chronic fatigue syndrome and neuromuscular diseases and show several characteristic differences with healthy controls. Methods/design Fifty seven severely fatigued and 21 non-fatigued cancer survivors will be recruited from the Radboud University Nijmegen Medical Centre. Participants should have completed treatment of a malignant, solid tumour minimal one year earlier and should have no evidence of disease recurrence. Severely fatigued patients are randomly assigned to either the intervention condition (cognitive behaviour therapy or the waiting list condition (start cognitive behaviour therapy after 6 months. All participants are assessed at baseline and the severely fatigued patients also after 6 months follow-up (at the end of cognitive behaviour therapy or waiting list. Primary outcome measures are fatigue severity, central and peripheral fatigue, brain morphology and function, and physical condition and activity. Discussion This study will be the first randomized controlled trial that characterizes (neurophysiological factors of fatigue in disease-free cancer survivors and evaluates to which extent these factors can be influenced by cognitive behaviour therapy

  12. Design and development of seal components fatigue tester

    Directory of Open Access Journals (Sweden)

    P. Czop

    2008-09-01

    Full Text Available Purpose: The aim of the paper is research and development concerning a fatigue tester of shock absorber seal systems.Design/methodology/approach: Analytical approach has been applied to get an understanding of a heat exchange process. The mathematical model has been formulated and validated based on the available measurements. Numerical simulation has been carried out to illustrate a heat exchange process performance.Findings: It is possible to control a seal temperature and mechanical friction related to the rod movement into the seal at the specified velocity. The model accuracy is sufficient to perform sensitivity analysis and optimize the design.Research limitations/implications: The components of a fatigue tester have to withstand the significant temperature differences in the range 30; +140˚C, e.g. hydraulic hoses, fittings, and pumps.Practical implications: We combine the analytical and experimental approach to provide customized and reliable engineering solution in the area of damper component seal development. A typical seal has a lip-like design protecting the moving parts against the leakage. It can be tested in a shock absorber or externally with use of a customized test rigs. Seal tests inside a shock absorber have numerous disadvantages. A shock absorber temperature rises during longer tests and cooling phase is required. This dramatically increases tests duration performed with the use of an expensive general-purpose hydraulic testing machinery. A compressed air or water jacket is used to accelerate the cooling process. Nevertheless, there are limitations related to the physics behind the cooling process. A seal component fatigue tester allows to perform the seal component tests out of the shock absorber.Originality/value: A new testing method provides possibility to quantify the main contributors of seal usage.

  13. Design of a Compact Fatigue Tester for Testing Irradiated Materials

    Energy Technology Data Exchange (ETDEWEB)

    Hartsell, Brian [Fermilab; Campbell, Michael [Fermilab; Fitton, Michael [RAL, Didcot; Hurh, Patrick [Fermilab; Ishida, Taku [KEK, Tsukuba; Nakadaira, Takeshi [KEK, Tsukuba

    2015-06-01

    A compact fatigue testing machine that can be easily inserted into a hot cell for characterization of irradiated materials is beneficial to help determine relative fatigue performance differences between new and irradiated material. Hot cell use has been carefully considered by limiting the size and weight of the machine, simplifying sample loading and test setup for operation via master-slave manipulator, and utilizing an efficient design to minimize maintenance. Funded from a US-Japan collaborative effort, the machine has been specifically designed to help characterize titanium material specimens. These specimens are flat cantilevered beams for initial studies, possibly utilizing samples irradiated at other sources of beam. The option to test spherically shaped samples cut from the T2K vacuum window is also available. The machine is able to test a sample to $10^7$ cycles in under a week, with options to count cycles and sense material failure. The design of this machine will be presented along with current status.

  14. Fatigue Test Design: Scenarios for Biaxial Fatigue Testing of a 60-Meter Wind Turbine Blade

    Energy Technology Data Exchange (ETDEWEB)

    Post, Nathan [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-07-01

    Current practice in commercial certification of wind turbine blades is to perform separate flap and lead-lag fatigue tests. The National Renewable Energy Laboratory has been researching and evaluating biaxial fatigue testing techniques and demonstrating various options, typically on smaller-scale test articles at the National Wind Technology Center. This report evaluates some of these biaxial fatigue options in the context of application to a multimegawatt blade certification test program at the Wind Technology Testing Center in Charlestown, Massachusetts.

  15. Handbook of Modern Sensors Physics, Designs, and Applications

    CERN Document Server

    Fraden, Jacob

    2010-01-01

    This book is about devices commonly called sensors. Digital systems, however complex and intelligent they might be, must receive information from the outside world that is generally analog and not electrical. Sensors are interface devices between various physical values and the electronic circuits who "understand" only a language of moving electrical charges. In other words, sensors are the eyes, ears, and noses of silicon chips. Unlike other books on sensors, this book is organized according to the measured variables (temperature, pressure, position, etc.) that make it much more practical and easier to read. In this new edition recent ideas and developments have been added while less important and non-essential designs were dropped. Sections on practical designs and use of the modern micro-machining technologies have been revised substantially. This book is a reference text that can be used by students, researchers interested in modern instrumentation (applied physicists and engineers), sensor designers, app...

  16. Employee Handbook

    Energy Technology Data Exchange (ETDEWEB)

    Bello, Madelyn

    2008-09-05

    Welcome to Berkeley Lab. You are joining or are already a part of a laboratory with a sterling tradition of scientific achievement, including eleven Nobel Laureates and thirteen National Medal of Science winners. No matter what job you do, you make Berkeley Lab the outstanding organization that it is. Without your hard work and dedication, we could not achieve all that we have. We value you and thank you for choosing to be part of our community. This Employee Handbook is designed to help you navigate the Lab. With over 3,000 employees, an additional 3,000 guests visiting from countries around the world, a 200-acre campus and many policies and procedures, learning all the ins and outs may seem overwhelming, especially if you're a new employee. However, even if you have been here for a while, this Handbook should be a useful reference tool. It is meant to serve as a guide, highlighting and summarizing what you need to know and informing you where you can go for more detailed information. The general information provided in this Handbook serves only as a brief description of many of the Lab's policies. Policies, procedures and information are found in the Lab's Regulations and Procedures Manual (RPM), Summary Plan Descriptions, University of California policies, and provisions of Contract 31 between the Regents of the University and the U.S. Department of Energy. In addition, specific terms and conditions for represented employees are found in applicable collective bargaining agreements. Nothing in this Handbook is intended to supplant, change or conflict with the previously mentioned documents. In addition, the information in this Handbook does not constitute a contract or a promise of continued employment and may be changed at any time by the Lab. We believe employees are happier and more productive if they know what they can expect from their organization and what their organization expects from them. The Handbook will familiarize you with the

  17. Designing and Producing Videotex Instruction. A Producer's Handbook.

    Science.gov (United States)

    Nugent, Gwen; And Others

    One of the objectives of the Nebraska Interactive Cable Project, an investigation of the educational potential of interactive cable, was to develop a design and production process for interactive cable/videotex instruction. The first part of the project involved the adaptation of three existing correspondence courses on marriage and the family,…

  18. Processing a programming handbook for visual designers and artists

    CERN Document Server

    Reas, Casey

    2014-01-01

    The visual arts are rapidly changing as media moves into the web, mobile devices, and architecture. When designers and artists learn the basics of writing software, they develop a new form of literacy that enables them to create new media for the present, and to imagine future media that are beyond the capacities of current software tools. This book introduces this new literacy by teaching computer programming within the context of the visual arts. It offers a comprehensive reference and text for Processing (www.processing.org), an open-source programming language that can be used by students, artists, designers, architects, researchers, and anyone who wants to program images, animation, and interactivity. Written by Processing's cofounders, the book offers a definitive reference for students and professionals. Tutorial chapters make up the bulk of the book; advanced professional projects from such domains as animation, performance, and installation are discussed in interviews with their creators. This secon...

  19. Handbook of virtual environments design, implementation, and applications

    CERN Document Server

    Hale, Kelly S

    2014-01-01

    This second edition of a bestseller presents systematic and extensive coverage of the primary areas of research and development within VE technology. It brings together a comprehensive set of contributed articles that address the principles required to define system requirements and design, build, evaluate, implement, and manage the effective use of VE applications. The contributors provide critical insights and principles associated with their given area of expertise to provide extensive scope and detail on VE technology.

  20. Testability Design Rating System: Testability Handbook. Volume 1

    Science.gov (United States)

    1992-02-01

    4205 12a. DISTRIBUTION/ AVAILABILTY STATEMENT 12b. DISTRIBUTION CODE Approved for public release; distribution unlimited. 13. ABSTRACT (Maivw 200s) This...DATA EB-1 OMBER A PLATFORMD B-1 BOMBER SUBSYSTEMS CHECKED BY C.I.T.S. FUEL SYSTEM E N G IN E SF L D R C O M T ENGINE THRUST CONT FLANDING GEAR &DCMET...to functional usage . EDGE EDGE UIA CNNETOPCONNECTOR UIB 2 COMMAND Figure 7-10. Use of Buffers 7.4.3.3 Bused Logic. Systems designed with

  1. Handbook of design research methods in education innovations in science, technology, engineering, and mathematics learning and teaching

    CERN Document Server

    Lesh, Richard A; Baek, John Y

    2008-01-01

    This Handbook presents the latest thinking and current examples of design research in education. Design-based research involves introducing innovations into real-world practices (as opposed to constrained laboratory contexts) and examining the impact of those designs on the learning process. Designed prototype applications (e.g., instructional methods, software or materials) and the research findings are then cycled back into the next iteration of the design innovation in order to build evidence of the particular theories being researched, and to positively impact practice and the diffusion of the innovation. The Handbook of Design Research Methods in Education-- the defining book for the field -- fills a need in how to conduct design research by those doing so right now. The chapters represent a broad array of interpretations and examples of how today's design researchers conceptualize this emergent methodology across areas as diverse as educational leadership, diffusion of innovations, complexity theory, an...

  2. Instructor/Operator Station Design Handbook for Aircrew Training Devices. Final Technical Report for Period March 1982-December 1986.

    Science.gov (United States)

    Warner, H. D.

    Human engineering guidelines for the design of instructor/operator stations (IOSs) for aircrew training devices are provided in this handbook. These guidelines specify the preferred configuration of IOS equipment across the range of the anticipated user sizes and performance capabilities. The guidelines are consolidated from various human…

  3. Indoor air quality handbook for designers, builders and users of energy efficient residences

    Science.gov (United States)

    1982-09-01

    The purpose of the handbook is to assist designers, builders, and users of energy efficient residences to achieve the goals of energy efficiency and maintenance of high indoor air quality simultaneously. Basic concepts of contaminants and their concentrations, sources and removal mechanisms, contaminant distribution, heat transfer, and air exchange are discussed. The effects of the building system on indoor air quality are examined. The effects of the external environment, building envelope, environmental control systems, interior design, furnishings, and inhabitants on the emission, dispersion, and removal of indoor air contaminants as well as direct and indirect effects of energy efficient features are discussed. The health effects of specific air contaminants and the health standards developed for them are examined. Available methods for predicting and measuring contaminants and for evaluating human responses are discussed. Methods and equipment available for the control of indoor air pollution once the contaminants have been identified are also evaluated. The potential legal aspects control indoor air pollution are discussed.

  4. RESEARCH PROGRESS ON STRUCTURAL FATIGUE RELIABILITY DESIGN AND ANALYSIS METHODS OF CHINESE RAILWAY VEHICLES

    Institute of Scientific and Technical Information of China (English)

    ZHAO Yongxiang; PENG Jiachun; YANG Bing

    2007-01-01

    A state-of-art review is given to the new advances on fatigue reliability design and analysis methods of Chinese railway vehicle's structures. First, the structures are subject to a complicated random fatigue stressing history and this history should be determined by combining dynamic Simulation and on-line inspection. Second, the random fatigue constitutions belong to an intrinsic fatigue phenomenon and a probabilistic model is developed to well describe them with two measurements of survival probability and confidence, similar model is also presented for the random stress-life relations and extrapolated appropriately into long fatigue life regime. Third, concept of the fatigue limit should be understood as the fatigue strength at a given fatigue life and a so-called local Basquin model method is proposed for measuring the random strengths. In addition, drawing and application methods of the Goodman-Smith diagram for integrally characterizing the random fatigue strengths are established in terms of ten kilometers. Fourth, a reliability stress-based method is constructed with a consideration of the random constitutive relations. These new advances form a new frame work for railway fatigue reliability design and analysis.

  5. Rockin' Readers Handbook.

    Science.gov (United States)

    Alachua County Schools, Gainesville, FL.

    Designed for use by volunteers in the program, this handbook describes the "Rockin' Readers" program, in which senior-citizen volunteers are matched with specifically targeted at-risk children in Alachua County, Florida, who tested below their peer group in language development and reading readiness skills. The handbook notes that each…

  6. Area Handbook for Honduras.

    Science.gov (United States)

    Blutstein, Howard I.; And Others

    This volume is one of 62 in a series of handbooks designed to be useful to military and other personnel who need a convenient compilation of basic facts about social, economic, political, and military institutions and practices of various countries. This handbook seeks to supply an integrated and comprehensive exposition and analysis of the entire…

  7. Device Design and Test of Fatigue Behaviour of Expansion Anchor Subjected to Tensile Loads

    Directory of Open Access Journals (Sweden)

    Zhang Jinfeng

    2016-01-01

    Full Text Available In order to study on the fatigue behaviour of expansion anchor (M16, grade 8.8 for overhead contact system in electrification railways, a set of safe, practical loading device is designed and a fatigue test campaign was carried out at structural laboratory of China Academy of Building Research on expansion anchor embedded in concrete block. The mobile frame of the loading device was designed well by finite-element simulation. According to some fatigue performance test of expansion anchor with different size and form, the device have been assessed experimentally its dependability. The results were found that no fatigue damage phenomenon occurred in all specimens after 2×106 cycles tensile fatigue test in this specific series. It shows that in the condition of medium level or slightly lower maximum stress limit and nominal stress range, expansion bolt has good fatigue resistance. The biggest relative displacement and the residual relative displacement after test (Δδ = δ2-δ1 was also strongly lower than the symbol of the fatigue test failure index of this specific series (0.5mm in the high cycle fatigue regime. The ultimate tension failures mode after fatigue tests in all tested samples take place in the concrete anchorage zone. The reduction range of the ultimate tensile strength properties of the anchorage system was not obvious, and the concrete was seen to be the weakest link of the system.

  8. The safety relief valve handbook design and use of process safety valves to ASME and International codes and standards

    CERN Document Server

    Hellemans, Marc

    2009-01-01

    The Safety Valve Handbook is a professional reference for design, process, instrumentation, plant and maintenance engineers who work with fluid flow and transportation systems in the process industries, which covers the chemical, oil and gas, water, paper and pulp, food and bio products and energy sectors. It meets the need of engineers who have responsibilities for specifying, installing, inspecting or maintaining safety valves and flow control systems. It will also be an important reference for process safety and loss prevention engineers, environmental engineers, and plant and process designers who need to understand the operation of safety valves in a wider equipment or plant design context. . No other publication is dedicated to safety valves or to the extensive codes and standards that govern their installation and use. A single source means users save time in searching for specific information about safety valves. . The Safety Valve Handbook contains all of the vital technical and standards informat...

  9. Effects of LWR coolant environments on fatigue design curves of carbon and low-alloy steels

    Energy Technology Data Exchange (ETDEWEB)

    Chopra, O.K.; Shack, W.J. [Argonne National Lab., IL (United States)

    1998-03-01

    The ASME Boiler and Pressure Vessel Code provides rules for the construction of nuclear power plant components. Figures I-9.1 through I-9.6 of Appendix I to Section III of the code specify fatigue design curves for structural materials. While effects of reactor coolant environments are not explicitly addressed by the design curves, test data indicate that the Code fatigue curves may not always be adequate in coolant environments. This report summarizes work performed by Argonne National Laboratory on fatigue of carbon and low-alloy steels in light water reactor (LWR) environments. The existing fatigue S-N data have been evaluated to establish the effects of various material and loading variables such as steel type, dissolved oxygen level, strain range, strain rate, temperature, orientation, and sulfur content on the fatigue life of these steels. Statistical models have been developed for estimating the fatigue S-N curves as a function of material, loading, and environmental variables. The results have been used to estimate the probability of fatigue cracking of reactor components. The different methods for incorporating the effects of LWR coolant environments on the ASME Code fatigue design curves are presented.

  10. Factors that affect the fatigue strength of power transmission shafting and their impact on design

    Science.gov (United States)

    Leowenthal, S. H.

    1986-01-01

    A long standing objective in the design of power transmission shafting is to eliminate excess shaft material without compromising operational reliability. A shaft design method is presented which accounts for variable amplitude loading histories and their influence on limited life designs. The effects of combined bending and torsional loading are considered along with a number of application factors known to influence the fatigue strength of shafting materials. Among the factors examined are surface condition, size, stress concentration, residual stress and corrosion fatigue.

  11. Fatigue in high-speed aluminium craft: A design methodology for predicting the fatigue life

    NARCIS (Netherlands)

    Tuitman, J.T.; Hoogendoorn, D.

    2013-01-01

    Within the VOMAS project, a methodology has been developed to predict the fatigue life of high-speed aluminium crafts. This paper describes this methodology and its implementation into a computational tool. This methodology computes the seakeeping and resulting pressure at the structure for all cond

  12. Subsection method of fatigue design for welded joints treated by ultrasonic peening

    Institute of Scientific and Technical Information of China (English)

    Wang Ting; Wang Dongpo; Huo Lixing; Zhang Yufeng

    2006-01-01

    Concerning the notable difference between the S-N curve slope of welded joints treated by ultrasonic peening treatment (UPT) and that of as-welded joints, the subsection method is put forward for fatigue design of welded joints treated by UPT, using the design method of nominal S-N curves. Results show that, in medium life zone, strength grade of the fatigue design curves for UPT welded joints is two grades higher than that for as-welded joints. Furthermore, in medium life zone, strength grade of the fatigue design curves for UPT welded joints is three grades lower than that in long life zone.Conclusion of the comparison is that as for different joint types in different life zones, fatigue design should be processed according to different S-N curves respectively.

  13. Rechargeable batteries applications handbook

    CERN Document Server

    1998-01-01

    Represents the first widely available compendium of the information needed by those design professionals responsible for using rechargeable batteries. This handbook introduces the most common forms of rechargeable batteries, including their history, the basic chemistry that governs their operation, and common design approaches. The introduction also exposes reader to common battery design terms and concepts.Two sections of the handbook provide performance information on two principal types of rechargeable batteries commonly found in consumer and industrial products: sealed nickel-cad

  14. Prodeto, a computer code for probabilistic fatigue design

    Energy Technology Data Exchange (ETDEWEB)

    Braam, H. [ECN-Solar and Wind Energy, Petten (Netherlands); Christensen, C.J.; Thoegersen, M.L. [Risoe National Lab., Roskilde (Denmark); Ronold, K.O. [Det Norske Veritas, Hoevik (Norway)

    1999-03-01

    A computer code for structural relibility analyses of wind turbine rotor blades subjected to fatigue loading is presented. With pre-processors that can transform measured and theoretically predicted load series to load range distributions by rain-flow counting and with a family of generic distribution models for parametric representation of these distribution this computer program is available for carying through probabilistic fatigue analyses of rotor blades. (au)

  15. Prediction of Mean and Design Fatigue Lives of Self Compacting Concrete Beams in Flexure

    Science.gov (United States)

    Goel, S.; Singh, S. P.; Singh, P.; Kaushik, S. K.

    2012-02-01

    In this paper, result of an investigation conducted to study the flexural fatigue characteristics of self compacting concrete (SCC) beams in flexure are presented. An experimental programme was planned in which approximately 60 SCC beam specimens of size 100 × 100 × 500 mm were tested under flexural fatigue loading. Approximately 45 static flexural tests were also conducted to facilitate fatigue testing. The flexural fatigue and static flexural strength tests were conducted on a 100 kN servo-controlled actuator. The fatigue life data thus obtained have been used to establish the probability distributions of fatigue life of SCC using two-parameter Weibull distribution. The parameters of the Weibull distribution have been obtained by different methods of analysis. Using the distribution parameters, the mean and design fatigue lives of SCC have been estimated and compared with Normally vibrated concrete (NVC), the data for which have been taken from literature. It has been observed that SCC exhibits higher mean and design fatigue lives compared to NVC.

  16. NASA-STD-3001, Space Flight Human-System Standard and the Human Integration Design Handbook

    Science.gov (United States)

    Whitmore, Mihriban; Boyer, Jennifer; Holubec, Keith

    2012-01-01

    NASA-STD-3001 Space Flight Human-System Standard Volume 1, Crew Health, Volume 2, Human Factors, Habitability and Environmental Health, and the Human Integration Design Handbook (HIDH) have replaced the Man-Systems Integration Standards (MSIS), NASA-STD-3000. For decades, NASA-STD-3000 was a significant contribution to human spaceflight programs and to human-systems integration. However, with research program and project results being realized, advances in technology, and the availability of new information in a variety of topic areas, the time had arrived to update this extensive suite of standards and design information. NASA-STD-3001, Volume 2 contains the Agency level standards from the human and environmental factors disciplines that ensure human spaceflight operations are performed safely, efficiently, and effectively. The HIDH is organized in the same sequence and serves as the companion document to NASA-STD-3001, Volume 2, providing a compendium of human spaceflight history and knowledge. The HIDH is intended to aid interpretation of NASA-STD-3001, Volume 2 standards and to provide guidance for requirement writers and vehicle and habitat designers. Keywords Human Factors, Standards, Environmental Factors, NASA

  17. Duct injection for SO{sub 2} control, Design Handbook, Volume 1, Process design and engineering guidelines

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    PETC developed a comprehensive program of coal-related, acid-rain research and development with a major activity area centering on flue gas cleanup and control of SO{sub 2} emissions. Particular emphasis was placed on the retrofit measures for older coal-fired power plants which predate the 1971 New Source Performance Standards. Candidate emission control technologies fall into three categories, depending upon their point of application along the fuel path (i.e., pre, during, or post combustion). The post-combustion, in-duct injection of a calcium-based chemical reagent seemed promising. Preliminary studies showed that reagent injection between the existing air heater and electrostatic precipitator (ESP) could remove between 50-60% of the SO{sub 2} and produce an environmentally safe, dry, solid waste that is easily disposed. Although SO{sub 2} removal efficiencies were less, the estimated capital costs for duct injection technology were low making the economics of duct injection systems seem favorable when compared to conventional wet slurry scrubbers under certain circumstances. With the promulgation of the Clean Air Act Amendments of 1990 came more incentive for the development of low capital cost flue gas desulfurization (FGD) processes. A number of technical problems had to be resolved, however, before duct injection technology could be brought to a state of commercial readiness. The Duct Injection Technology Development Program was launched as a comprehensive, four-year research effort undertaken by PETC to develop this new technology. Completed in 1992, this Duct Injection Design Handbook and the three-dimensional predictive mathematical model constitute two primary end products from this development program. The aim of this design handbook and the accompanying math model is to provide utility personnel with sufficient information to evaluate duct injection technology against competing SO{sub 2} emissions reduction strategies for an existing plant.

  18. Energy Handbook; Energy Vademecum

    Energy Technology Data Exchange (ETDEWEB)

    Israels, E.; Stofberg, F.

    2010-05-15

    This is the third and revised print of the Handbook energy-conscious designing of new dwellings. The handbook addresses the latest developments in the field of developing, designing and realizing of new dwellings. [Dutch] Dit is een derde en sterk herziene druk van het 'Vademecum energiebewust ontwerpen van nieuwbouwwoningen', dat in 1992 verscheen. In het 'EnergieVademecum' komen de nieuwste ontwikkelingen op het gebied van energiebewust ontwikkelen, ontwerpen en realiseren van nieuwbouwwoningen aan bod.

  19. Load assumption for fatigue design of structures and components counting methods, safety aspects, practical application

    CERN Document Server

    Köhler, Michael; Pötter, Kurt; Zenner, Harald

    2017-01-01

    Understanding the fatigue behaviour of structural components under variable load amplitude is an essential prerequisite for safe and reliable light-weight design. For designing and dimensioning, the expected stress (load) is compared with the capacity to withstand loads (fatigue strength). In this process, the safety necessary for each particular application must be ensured. A prerequisite for ensuring the required fatigue strength is a reliable load assumption. The authors describe the transformation of the stress- and load-time functions which have been measured under operational conditions to spectra or matrices with the application of counting methods. The aspects which must be considered for ensuring a reliable load assumption for designing and dimensioning are discussed in detail. Furthermore, the theoretical background for estimating the fatigue life of structural components is explained, and the procedures are discussed for numerous applications in practice. One of the prime intentions of the authors ...

  20. Handbook of antenna technologies

    CERN Document Server

    Liu, Duixian; Nakano, Hisamatsu; Qing, Xianming; Zwick, Thomas

    2016-01-01

    The Handbook of Antenna Technologies aims to present the rapid development of antenna technologies, particularly in the past two decades, and also showcasing the newly developed technologies and the latest applications. The handbook will provide readers with the comprehensive updated reference information covering theory, modeling and optimization methods, design and measurement, new electromagnetic materials, and applications of antennas. The handbook will widely cover not only all key antenna design issues but also fundamentals, issues related to antennas (transmission, propagation, feeding structure, materials, fabrication, measurement, system, and unique design challenges in specific applications). This handbook will benefit the readers as a full and quick technical reference with a high-level historic review of technology, detailed technical descriptions and the latest practical applications.

  1. Java EE 7 handbook

    CERN Document Server

    Pilgrim, Peter A

    2013-01-01

    Java EE 7 Handbook is an example based tutorial with descriptions and explanations.""Java EE 7 Handbook"" is for the developer, designer, and architect aiming to get acquainted with the Java EE platform in its newest edition. This guide will enhance your knowledge about the Java EE 7 platform. Whether you are a long-term Java EE (J2EE) developer or an intermediate level engineer on the JVM with just Java SE behind you, this handbook is for you, the new contemporary Java EE 7 developer!

  2. STUDY ON THE METHOD OF FATIGUE STRENGTH DESIGN FOR DYNAMICALLY LOADED JOURNAL BEARING

    Institute of Scientific and Technical Information of China (English)

    FanXun; MengHuirong

    1996-01-01

    In this paper, a novel design method, which is different from the traditional and empirical one (i. e. , taking p and pv as the basic checking parameters) is presented for the fatigue strength design of dynamically loaded journal bearings. The method makes it possible that dynamically loaded bearings can be designed as same as other machine elements hy stress-strength criterion. The practical design results show that the method has high accuracy and reliability, and may open a new vista in bearing fatigue designs.

  3. The anti-fatigue driving system design based on the eye blink detect

    Science.gov (United States)

    Yang, Shuyu; Song, Xin; Zhang, Li; Yu, Jie

    2017-01-01

    Traffic accident is one of the severe social problems in the world, but the appraisal and prevention of the fatigue driving is still a difficult problem that can not be solved. This paper is to study the results of fatigue driving and the existing antifatigue driving products, collecting brain wave with the TGAM (ThinkGear AM) Brain Wave Sensor Chip. We analyze the collected waveform based on eye blink detect algorithm to work out current situation of the driver. According to the analysis results, Sound Module and controllable speed car will make a series of feedback. Finally, an effective Anti- Fatigue Driving System is designed based on all above.

  4. Newnes electronics assembly handbook

    CERN Document Server

    Brindley, Keith

    2013-01-01

    Newnes Electronics Assembly Handbook: Techniques, Standards and Quality Assurance focuses on the aspects of electronic assembling. The handbook first looks at the printed circuit board (PCB). Base materials, basic mechanical properties, cleaning of assemblies, design, and PCB manufacturing processes are then explained. The text also discusses surface mounted assemblies and packaging of electromechanical assemblies, as well as the soldering process. Requirements for the soldering process; solderability and protective coatings; cleaning of PCBs; and mass solder/component reflow soldering are des

  5. Handbook on Decision Making

    CERN Document Server

    Jain, Lakhmi C

    2010-01-01

    The present "Volume 1: Techniques and Applications" of the "Handbook on Decision Making" presents a useful collection of AI techniques, as well as other complementary methodologies, that are useful for the design and development of intelligent decision support systems. Application examples of how these intelligent decision support systems can be utilized to help tackle a variety of real-world problems in different domains, such as business, management, manufacturing, transportation and food industries, and biomedicine, are presented. The handbook includes twenty condensed c

  6. Fatigue Design Evaluation of Railway Bogie with Full-Scale Fatigue Test

    Directory of Open Access Journals (Sweden)

    Jung-Won Seo

    2017-01-01

    Full Text Available The bogie frame of a railway is an important structural member for the support of vehicle loading. In general, more than 25 years’ durability is necessary. Much study has been carried out in experimental and theoretical domains on the prediction of the structural integrity of the bogie frame. The objective of this paper is to estimate the structural integrity of the bogie frame of an electric railcar. Strength analysis has been performed by finite element analysis. From this analysis, stress concentration areas were investigated. To evaluate the loading conditions, dynamic stress was measured by strain gauge. It has been found that the stress and strain due to the applied loads were multiaxial conditions according to the location of the strain gauge. Fatigue strength evaluations of the bogie frame were performed to investigate the effect of a multiaxial load through the employment of a critical plane approach.

  7. Fatigue Design of Leaf Springs for New Generation Trucks

    Science.gov (United States)

    Giannakis, E.; Malikoutsakis, M.; Savaidis, G.

    2016-11-01

    Taking as example high-performance parabolic leaves made of the high-strength steel 52CrMoV4 used for the suspensión of heavy truck axles, the present paper focuses on the effect of the manufacturing process (heat treatment and stress peening) on their performance under fatigue loading. Investigations of the microstructure and the mechanical properties of the core and the surface of selected prototype specimens reveal the degradation of the mechanical surface properties due to the applied manufacturing process. The results of these investigations have been used as input for analytical fatigue life calculations and the theoretical assessment of every individual life-influencing factor (material, heat treatment, surface treatment, loading). Wohler (S-N) curves for various probabilities of survival were experimentally determined and compared to the calculated ones. The agreement between Experiment and Theory is satisfactory.

  8. Designing aluminium friction stir welded joints against multiaxial fatigue

    Directory of Open Access Journals (Sweden)

    L. Susmel

    2016-07-01

    Full Text Available The present paper investigates the accuracy of the Modified Wöhler Curve Method (MWCM in estimating multiaxial fatigue strength of aluminium friction stir (FS welded joints. Having developed a bespoke joining technology, circumferentially FS welded tubular specimens of Al 6082-T6 were tested under proportional and non-proportional tension and torsion, the effect of non-zero mean stresses being also investigated. The validation exercise carried out using the experimental results have demonstrated that the MWCM applied in terms of nominal stresses, notch stresses, and also the Point Method is accurate in predicting the fatigue lifetime of the tested FS welded joints, with its use resulting in life estimates that fall within the uniaxial and torsional calibration scatter bands.

  9. Fatigue Characterization of Fabricated Ship Details for Design.

    Science.gov (United States)

    1982-08-01

    Welded Connections," SRS No. 366, Department of Civil Engineering, University of Illinois, Urbana-Champaign, August 1970. 2.13 Derecho , A. T. and...Performing Organization Name and Addess 10. Wnk UnvfNo. (TRAIS) Department of Civil Engineering University of Illinois at Urbana-Champaign II...on Structural Fatigue," Journal of the Structural Division, American Society of Civil Engineers, Vol. 44, No. ST12, December 1968, pp. 2663-2797. 2.6

  10. Pressure vessels design methods using the codes, fracture mechanics and multiaxial fatigue

    Directory of Open Access Journals (Sweden)

    Fatima Majid

    2016-10-01

    Full Text Available This paper gives a highlight about pressure vessel (PV methods of design to initiate new engineers and new researchers to understand the basics and to have a summary about the knowhow of PV design. This understanding will contribute to enhance their knowledge in the selection of the appropriate method. There are several types of tanks distinguished by the operating pressure, temperature and the safety system to predict. The selection of one or the other of these tanks depends on environmental regulations, the geographic location and the used materials. The design theory of PVs is very detailed in various codes and standards API, such as ASME, CODAP ... as well as the standards of material selection such as EN 10025 or EN 10028. While designing a PV, we must design the fatigue of its material through the different methods and theories, we can find in the literature, and specific codes. In this work, a focus on the fatigue lifetime calculation through fracture mechanics theory and the different methods found in the ASME VIII DIV 2, the API 579-1 and EN 13445-3, Annex B, will be detailed by giving a comparison between these methods. In many articles in the literature the uniaxial fatigue has been very detailed. Meanwhile, the multiaxial effect has not been considered as it must be. In this paper we will lead a discussion about the biaxial fatigue due to cyclic pressure in thick-walled PV. Besides, an overview of multiaxial fatigue in PVs is detailed

  11. Applications of fatigue and fracture tolerant design concepts in the nuclear power industry

    Energy Technology Data Exchange (ETDEWEB)

    Jones, R.L.; Marston, T.U.; Tagart, S.W.; Norris, D.M.; Nickell, R.E.

    1982-01-01

    To assure the integrity of nuclear power plant components, fatigue and fracture tolerant design concepts have been incorporated in Sections III and XI of the ASME Code; these contain requirements for nuclear power plant design, construction, and in-service inspection. The methods used in the Code to design against fatigue and brittle fracture are described together with the fracture mechanics based procedure suggested in Sections XI for the evaluation of flaws detected by in-service inspections. Some aspects of the present Code methods that could probably be improved are identified. 19 refs.

  12. Analysis and Support Initiative for Structural Technology (ASIST) Delivery Order 0016: USAF Damage Tolerant Design Handbook: Guidelines For the Analysis and Design of Damage Tolerant Aircraft Structures

    Science.gov (United States)

    2002-11-01

    229-4417 email: berens@udri.udayton.edu DARWIN Design Assessment of Reliability WIth INspection ( DARWIN ) is a risk analysis program for...calculating the probability of failure in turbine engine disks. With a graphical user interface for problem setup and output, DARWIN integrates finite...Analysis of Cracks Handbook (Tada, et al., 1973), • Compendium of Stress Intensity Factors (Rooke & Cartwright , 1976), • Stress Intensity Factors

  13. NASA Systems Engineering Handbook

    Science.gov (United States)

    Hirshorn, Steven R.; Voss, Linda D.; Bromley, Linda K.

    2017-01-01

    The update of this handbook continues the methodology of the previous revision: a top-down compatibility with higher level Agency policy and a bottom-up infusion of guidance from the NASA practitioners in the field. This approach provides the opportunity to obtain best practices from across NASA and bridge the information to the established NASA systems engineering processes and to communicate principles of good practice as well as alternative approaches rather than specify a particular way to accomplish a task. The result embodied in this handbook is a top-level implementation approach on the practice of systems engineering unique to NASA. Material used for updating this handbook has been drawn from many sources, including NPRs, Center systems engineering handbooks and processes, other Agency best practices, and external systems engineering textbooks and guides. This handbook consists of six chapters: (1) an introduction, (2) a systems engineering fundamentals discussion, (3) the NASA program project life cycles, (4) systems engineering processes to get from a concept to a design, (5) systems engineering processes to get from a design to a final product, and (6) crosscutting management processes in systems engineering. The chapters are supplemented by appendices that provide outlines, examples, and further information to illustrate topics in the chapters. The handbook makes extensive use of boxes and figures to define, refine, illustrate, and extend concepts in the chapters.

  14. Probabilistic Calibration of Fatigue Design Factors for Offshore Wind Turbine Support Structures

    DEFF Research Database (Denmark)

    Ramirez, José Rangel; Sørensen, John Dalsgaard

    2010-01-01

    This paper describes a reliability-based approach to determine fatigue design factors (FDF) for offshore wind turbine support structures made of steel. The FDF values are calibrated to a specific reliability level and linked to a specific inspection and maintenance (I&M) strategy used for the con......This paper describes a reliability-based approach to determine fatigue design factors (FDF) for offshore wind turbine support structures made of steel. The FDF values are calibrated to a specific reliability level and linked to a specific inspection and maintenance (I&M) strategy used...... for the considered offshore wind turbines in such a way that the specific uncertainties for the fatigue life are accounted in a rational manner. Similar approaches have been used for offshore oil & gas sub-structures, but the required reliability level for offshore wind turbines is generally lower and the fatigue...... if inspections are planned during the design life, and thereby the basis is available for selecting a cost-effective fatigue design. Further, the results can be used as basis for recommendations in standardization....

  15. Human Factors, Habitability and Environmental Health and the Human Integration Design Handbook. Volume 2

    Science.gov (United States)

    Houbec, Keith; Tillman, Barry; Connolly, Janis

    2010-01-01

    For decades, Space Life Sciences and NASA as an Agency have considered NASA-STD-3000, Man-Systems Integration Standards, a significant contribution to human spaceflight programs and to human-systems integration in general. The document has been referenced in numerous design standards both within NASA and by organizations throughout the world. With research program and project results being realized, advances in technology and new information in a variety of topic areas now available, the time arrived to update this extensive suite of requirements and design information. During the past several years, a multi-NASA center effort has been underway to write the update to NASA-STD-3000 with standards and design guidance that would be applicable to all future human spaceflight programs. NASA-STD-3001 - Volumes 1 and 2 - and the Human Integration Design Handbook (HIDH) were created. Volume 1, Crew Health, establishes NASA s spaceflight crew health standards for the pre-flight, in-flight, and post-flight phases of human spaceflight. Volume 2, Human Factors, Habitability and Environmental Health, focuses on the requirements of human-system integration and how the human crew interacts with other systems, and how the human and the system function together to accomplish the tasks for mission success. The HIDH is a compendium of human spaceflight history and knowledge, and provides useful background information and research findings. And as the HIDH is a stand-alone companion to the Standards, the maintenance of the document has been streamlined. This unique and flexible approach ensures that the content is current and addresses the fundamental advances of human performance and human capabilities and constraints research. Current work focuses on the development of new sections of Volume 2 and collecting updates to the HIDH. The new sections in development expand the scope of the standard and address mission operations and support operations. This effort is again collaboration

  16. Mauritanian Arabic. Teacher's Handbook. Peace Corps Language Handbook Series.

    Science.gov (United States)

    Clark, Raymond C.; And Others

    The teaching guide is designed to accompany a set of instructional materials in Mauritanian Arabic (Hassaniya) for Peace Corps volunteers. It provides information and techniques for language teaching in three volumes: (1) a literacy handbook--a volume of lessons on the Arabic alphabet and script; (2) a communication and culture handbook; and (3) a…

  17. Comparison of load-fatigue performance of posterior ceramic onlay restorations under different preparation designs.

    Science.gov (United States)

    Kois, Dean E; Chaiyabutr, Yada; Kois, John C

    2012-06-01

    The objective of this study was to evaluate the load-fatigue performance of posterior ceramic onlay restorations relative to two variables: preparation design (with or without buccal veneers); and the existing amount of tooth structure (non-worn tooth, worn tooth). Sixty extracted third molars were divided into five groups. One group received a mesial-occlusal-distal (MOD) gold onlay restoration (control). The other four experimental groups were prepared for ceramic onlay restorations. Two of the groups additionally received 2-mm occlusal reduction to simulate occlusal wear. All restored teeth were subjected to thermocycling prior to fatigue testing. A fatigue load of 150 N was applied on the occlusal surface at a frequency of 1.2 hz, at an angle of 135 degrees to the long axis of the tooth. Specimen failure was defined as the occurrence of crack propagation in the luting cement layer. This was monitored by the strain gauge on the specimen. All specimens restored on worn tooth had significantly lower fatigue failure cycle counts than those of non-worn tooth. The fracture mode analysis revealed that ceramic fracture tended to be demonstrated only in the group of worn tooth groups. The addition of a buccal veneer component had no significant effect on the load-fatigue performance of posterior ceramic onlay restorations, but the existing amount of tooth structure did have a significant effect on the load-fatigue performance of posterior ceramic onlay restorations. Catastrophic failures (ceramic fracture) occurred only in the group of worn tooth.

  18. Balance fatigue design of cast steel nodes in tubular steel structures.

    Science.gov (United States)

    Wang, Libin; Jin, Hui; Dong, Haiwei; Li, Jing

    2013-01-01

    Cast steel nodes are being increasingly popular in steel structure joint application as their advanced mechanical performances and flexible forms. This kind of joints improves the structural antifatigue capability observably and is expected to be widely used in the structures with fatigue loadings. Cast steel node joint consists of two parts: casting itself and the welds between the node and the steel member. The fatigue resistances of these two parts are very different; the experiment results showed very clearly that the fatigue behavior was governed by the welds in all tested configurations. This paper focuses on the balance fatigue design of these two parts in a cast steel node joint using fracture mechanics and FEM. The defects in castings are simulated by cracks conservatively. The final crack size is decided by the minimum of 90% of the wall thickness and the value deduced by fracture toughness. The allowable initial crack size could be obtained through the integral of Paris equation when the crack propagation life is considered equal to the weld fatigue life; therefore, the two parts in a cast steel node joint will have a balance fatigue life.

  19. Space Flight Human System Standards (SFHSS). Volume 2; Human Factors, Habitability and Environmental Factors" and Human Integration Design Handbook (HIDH)

    Science.gov (United States)

    Davis, Jeffrey R.; Fitts, David J.

    2009-01-01

    This viewgraph presentation reviews the standards for space flight hardware based on human capabilities and limitations. The contents include: 1) Scope; 2) Applicable documents; 3) General; 4) Human Physical Characteristics and Capabilities; 5) Human Performance and Cognition; 6) Natural and Induced Environments; 7) Habitability Functions; 8) Architecture; 9) Hardware and Equipment; 10) Crew Interfaces; 11) Spacesuits; 12) Operatons: Reserved; 13) Ground Maintenance and Assembly: Reserved; 14) Appendix A-Reference Documents; 15) Appendix N-Acronyms and 16) Appendix C-Definition. Volume 2 is supported by the Human Integration Design Handbook (HIDH)s.

  20. Learning and cognitive fatigue trajectories in multiple sclerosis defined using a burst measurement design.

    Science.gov (United States)

    Holtzer, Roee; Foley, Frederick; D'Orio, Vanessa; Spat, Jessica; Shuman, Melissa; Wang, Cuiling

    2013-10-01

    Compromised learning and cognitive fatigue are critical clinical features in multiple sclerosis. This study was designed to determine the effect of repeated exposures within and across study visits on performance measures of learning and cognitive fatigue in relapsing-remitting multiple sclerosis (RRMS). Thirty patients with RRMS and 30 controls were recruited. Using a burst measurement design (i.e. repeated assessments within and across study visits) the oral version of the Symbol Digit Modalities Test (SDMT) was administered three times during the baseline and two consecutive monthly follow-up visits for a total of nine test administrations. Learning was assessed within and across study visits whereas cognitive fatigue was assessed during the course of each test administration that was divided into three 30-second intervals. Linear mixed-effect models revealed compromised learning within (95% CI: 2.6355 to 3.9867) and across (95% CI: 1.3250 to 3.1861) visits and worse cognitive fatigue (95% CI: -2.1761 to -0.1720) in patients with RRMS compared with controls. Among patients with RRMS, worse self-rated cognitive dysfunction predicted poor learning within (95% CI: -0.1112 to -0.0020) and across (95% CI: -0.0724 to -0.0106) visits. Burst design is optimal to study learning and cognitive fatigue. This methodology, using the SDMT or other time-efficient tests as outcome measures, can be successfully implemented in longitudinal studies and clinical trials.

  1. The high performance HMI handbook a comprehensive guide to designing, implementing and maintaining effective HMIs for industrial plant operations

    CERN Document Server

    Hollifield, Bill; Nimmo, Ian; Habibi, Eddie

    2008-01-01

    The High Performance HMI Handbook is the first and only comprehensive book containing the best-practice principles for assessing, designing, and implementing proper process control Human-Machine Interfaces (HMIs). Poorly designed and poorly performing Human Machine Interfaces (HMIs) are rampant throughout the process industries. They can degrade safety, production, quality, and profitability. Time after time, they are cited as contributing factors to major industrial accidents. The book contains experience and intellectual property that has never before been released, It is jointly authored by 2 companies, PAS and User Centered Design Services (UCDS), who have decades of experience in process control, HMI design, and human factors. The book reveals many poor yet common HMI practices, provides the justification for change, and shows in great detail the best way to design and implement a truly High Performance HMI. It contains over 90 color illustrations, plus many relevant real world examples, anecdotes, and ...

  2. Colgate University Faculty Handbook, 1970.

    Science.gov (United States)

    Colgate Univ., Hamilton, NY.

    Designed to supplement the university catalog and handbook, this 1970 faculty handbook is primarily for the information and guidance of new members of the faculty. The community is described, and university organization and campus governance outlined. Specific details are reported on various topics, including: faculty use of college facilities,…

  3. Fatigue design of a cellular phone folder using regression model-based multi-objective optimization

    Science.gov (United States)

    Kim, Young Gyun; Lee, Jongsoo

    2016-08-01

    In a folding cellular phone, the folding device is repeatedly opened and closed by the user, which eventually results in fatigue damage, particularly to the front of the folder. Hence, it is important to improve the safety and endurance of the folder while also reducing its weight. This article presents an optimal design for the folder front that maximizes its fatigue endurance while minimizing its thickness. Design data for analysis and optimization were obtained experimentally using a test jig. Multi-objective optimization was carried out using a nonlinear regression model. Three regression methods were employed: back-propagation neural networks, logistic regression and support vector machines. The AdaBoost ensemble technique was also used to improve the approximation. Two-objective Pareto-optimal solutions were identified using the non-dominated sorting genetic algorithm (NSGA-II). Finally, a numerically optimized solution was validated against experimental product data, in terms of both fatigue endurance and thickness index.

  4. Mechanical design handbook for elastomers. [the design of elastomer dampers for application in rotating machinery

    Science.gov (United States)

    Darlow, M.; Zorzi, E.

    1981-01-01

    A comprehensive guide for the design of elastomer dampers for application in rotating machinery is presented. Theoretical discussions, a step by step procedure for the design of elastomer dampers, and detailed examples of actual elastomer damper applications are included. Dynamic and general physical properties of elastomers are discussed along with measurement techniques.

  5. Optimizing the Design of Connecting Rod under Static and Fatigue Loading

    OpenAIRE

    Om Parkash; Vikas Gupta; Vinod Mittal

    2013-01-01

    The main objective of this work is to re-optimize theexisting design of connecting rod of universal tractor (U650) bychanging some of the design variables. The existing designperforms modelling and evaluates critical regions in theconnecting rod under fatigue loading. In the present work, themodel is developed, analyzed and designed using CATIA 19,PRO-E and ANSYS workbench v12. Optimization of connectingrod is done under same boundary and loading conditions forvariation in the few stress and ...

  6. Fatigue and fracture resistance of zirconia crowns prepared with different finish line designs

    NARCIS (Netherlands)

    Aboushelib, M.N.

    2012-01-01

    Purpose: The aim of this study was to evaluate the effect of finish line design on the fatigue, fracture resistance, and failure type of veneered zirconia restorations. Materials and Methods: A CAD/CAM system (Cercon) was used to prepare zirconia frameworks (0.5 mm thick) for a maxillary central

  7. Probabilistic Calibration of Fatigue Design Factors for Offshore Wind Turbine Support Structures

    DEFF Research Database (Denmark)

    Ramirez, José Rangel; Sørensen, John Dalsgaard

    2010-01-01

    This paper describes a reliability-based approach to determine fatigue design factors (FDF) for offshore wind turbine support structures made of steel. The FDF values are calibrated to a specific reliability level and linked to a specific inspection and maintenance (I&M) strategy used for the con...

  8. Fatigue and fracture resistance of zirconia crowns prepared with different finish line designs

    NARCIS (Netherlands)

    Aboushelib, M.N.

    2012-01-01

    Purpose: The aim of this study was to evaluate the effect of finish line design on the fatigue, fracture resistance, and failure type of veneered zirconia restorations. Materials and Methods: A CAD/CAM system (Cercon) was used to prepare zirconia frameworks (0.5 mm thick) for a maxillary central inc

  9. Optimizing the Design of Connecting Rod under Static and Fatigue Loading

    Directory of Open Access Journals (Sweden)

    Om Parkash

    2013-06-01

    Full Text Available The main objective of this work is to re-optimize theexisting design of connecting rod of universal tractor (U650 bychanging some of the design variables. The existing designperforms modelling and evaluates critical regions in theconnecting rod under fatigue loading. In the present work, themodel is developed, analyzed and designed using CATIA 19,PRO-E and ANSYS workbench v12. Optimization of connectingrod is done under same boundary and loading conditions forvariation in the few stress and fatigue parameters i.e. stresses,weight, life, damage, bi-axiality indication and safety factor. Theallowable numbers of cycles under fully reversed fatigue loadingare increased and assumed up to a maximum limit of 109 cycles.Stress concentration coefficient is varied to obtain the maximumcycles condition. The critical regions under both static andfatigue analysis are identified and improved. The connecting rodis modelled and optimized for the reduced weight, improved lifeand manufacturability. The results obtained from performedanalysis can be used to modify the design of existing connectingrod, so that better performance i.e. reduced inertia, fatigue lifeand manufacturability can be obtained under varying static andfatigue conditions.

  10. Laser Cut Nitinol Tubing Fatigue Coupon: Design, Testing, and Endurance Limit

    Science.gov (United States)

    Forcucci, Stephen J.

    2014-07-01

    Nitinol medical device implants made from a laser cut tubing process (i.e., stents, valve structures, etc.) frequently require a fatigue durability assessment, which necessitates determining the material fatigue properties. Towards the goal of determining the strain-based endurance limit of medical grade superelastic Nitinol tubing, a coupon was designed and evaluated via FEA using Abaqus software, produced via laser cutting, shape setting, and electro-polishing processes, and then fatigue tested to 10 million cycles. FEA was used to determine the strain versus alternating displacement amplitude for the coupon. Error due to dimensional tolerances was determined. The coupons were then fatigue tested in a 37 °C temperature deionized water bath at alternating strain levels ranging from 0.75 to 4.0% at zero mean strain. Sample replication was greater than 90%, and the median alternating strain fatigue limit was determined via two methods. Confidence and reliability with maximum likelihood statistics are used to present a strain-based endurance limit for the material. The results seem to differ from previous published values.

  11. Development of high-cycle fatigue design curves for a cast aluminum alloy

    Science.gov (United States)

    Cooper, R. A.

    1979-01-01

    Life prediction curves for rocket engine pump parts were developed from the results of high-cycle fatigue tests run on cast-aluminum specimens. Notched and smooth specimens were cyclically tested at different mean stress levels at -320 F (78 K). The notch size and mean stress enveloped the design operating conditions. Local stress computed in the groove of the notched specimen was used to represent its fatigue strength. The von Mises criterion was used to determine effective cyclic stresses. The Goodman rule was applied to determine equivalent reversed alternating stresses. The procedure permitted the notched and smooth data sets to each be described by a single curve. High-cycle fatigue life curves were provided for the stress state, mean stress, and stress concentration spanned by the data.

  12. Gen IV Materials Handbook Functionalities and Operation

    Energy Technology Data Exchange (ETDEWEB)

    Ren, Weiju [ORNL

    2009-12-01

    This document is prepared for navigation and operation of the Gen IV Materials Handbook, with architecture description and new user access initiation instructions. Development rationale and history of the Handbook is summarized. The major development aspects, architecture, and design principles of the Handbook are briefly introduced to provide an overview of its past evolution and future prospects. Detailed instructions are given with examples for navigating the constructed Handbook components and using the main functionalities. Procedures are provided in a step-by-step fashion for Data Upload Managers to upload reports and data files, as well as for new users to initiate Handbook access.

  13. Teacher's Handbook. Peace Corps Language Handbook Series.

    Science.gov (United States)

    Clark, Raymond C.

    This handbook is a general introduction to the handbooks, methods, and materials used in Peace Corps language training classes. The first part of the handbook introduces the reader to the nature of language teaching and gives a general introduction to the handbooks. It also provides a more detailed description of the handbooks on (1) communication…

  14. Review of ASME-NH Design Materials for Creep-Fatigue

    Energy Technology Data Exchange (ETDEWEB)

    Koo, Gyeong Hoi; Kim, Jong Bum [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2010-05-15

    To review and recommend the candidate design materials for the Sodium-Cooled Fast Reactor, the material sensitivity evaluations by the comparison of design data between the ASME-NH materials were performed by using the SIE ASME-NH computer program implementing the material database of the ASME-NH. The design material data provided by the ASME-NH code are the elastic modulus and yield Strength, Time-Independent Allowable Stress Intensity value, time-dependent allowable stress intensity value, expected minimum stress-to rupture value, stress rupture Factors for weldment, isochronous stress-strain curves, and design fatigue curves. Among these, the data related with the creep-fatigue evaluation are investigated in this study

  15. NASA-STD 3001 and the Human Integration Design Handbook (HIDH): Evolution of NASA-STD-3000

    Science.gov (United States)

    Pickett, Lynn; Connolly, Janis; Arch, M.; Tillman, Barry; Russo, Dane

    2007-01-01

    The Habitability & Environmental Factors and Space Medicine Divisions have developed the Space Flight Human System Standard (SFHSS) (NASA-STD-3001) to replace NASA-STD-3000 as a new NASA standard for all human spaceflight programs. The SFHSS is composed of 2 volumes. Volume 1, Crew Health, contains medical levels of care, permissible exposure limits, and fitness for duty criteria, and permissible outcome limits as a means of defining successful operating criteria for the human system. Volume 2, Habitability and Environmental Health, contains environmental, habitability and human factors standards. Development of the Human Integration Design Handbook (HIDH), a companion to the standard, is currently under construction and entails the update and revision of NASA-STD-3000 data. This new handbook will, in the fashion of NASA STD-3000, assist engineers and designers in appropriately applying habitability, environmental and human factors principles to spacecraft design. Organized in a chapter-module-element structure, the HIDH will provide the guidance for the development of requirements, design considerations, lessons learned, example solutions, background research, and assist in the identification of gaps and research needs in the disciplines. Subject matter experts have been and continue to be solicited to participate in the update of the chapters. The purpose is to build the HIDH with the best and latest data, and provide a broad representation from experts in industry, academia, the military and the space program. The handbook and the two standards volumes work together in a unique way to achieve the required level of human-system interface. All new NASA programs will be required to meet Volumes 1 and 2. Volume 2 presents human interface goals in broad, non-verifiable standards. Volume 2 also requires that each new development program prepare a set of program-specific human factors requirements. These program-specific human and environmental factors requirements

  16. NASA-STD 3001 and the Human Integration Design Handbook (HIDH): Evolution of NASA-STD-3000

    Science.gov (United States)

    Pickett, Lynn; Connolly, Janis; Arch, M.; Tillman, Barry; Russo, Dane

    2007-01-01

    The Habitability & Environmental Factors and Space Medicine Divisions have developed the Space Flight Human System Standard (SFHSS) (NASA-STD-3001) to replace NASA-STD-3000 as a new NASA standard for all human spaceflight programs. The SFHSS is composed of 2 volumes. Volume 1, Crew Health, contains medical levels of care, permissible exposure limits, and fitness for duty criteria, and permissible outcome limits as a means of defining successful operating criteria for the human system. Volume 2, Habitability and Environmental Health, contains environmental, habitability and human factors standards. Development of the Human Integration Design Handbook (HIDH), a companion to the standard, is currently under construction and entails the update and revision of NASA-STD-3000 data. This new handbook will, in the fashion of NASA STD-3000, assist engineers and designers in appropriately applying habitability, environmental and human factors principles to spacecraft design. Organized in a chapter-module-element structure, the HIDH will provide the guidance for the development of requirements, design considerations, lessons learned, example solutions, background research, and assist in the identification of gaps and research needs in the disciplines. Subject matter experts have been and continue to be solicited to participate in the update of the chapters. The purpose is to build the HIDH with the best and latest data, and provide a broad representation from experts in industry, academia, the military and the space program. The handbook and the two standards volumes work together in a unique way to achieve the required level of human-system interface. All new NASA programs will be required to meet Volumes 1 and 2. Volume 2 presents human interface goals in broad, non-verifiable standards. Volume 2 also requires that each new development program prepare a set of program-specific human factors requirements. These program-specific human and environmental factors requirements

  17. Fatigue Analysis and Design Optimization of Aircraft’s Central Fuselage

    Science.gov (United States)

    Abbishek, R.; Kumar, B. Ravi; Sankara Subramanian, H.

    2017-08-01

    The centre fuselage of an aircraft plays a very crucial role as most of the important parts such as the front fuselage, aft fuselage and the wings are connected to it. So any load applied on these parts will be transferred to the centre fuselage. Hence it was essential to study the centre fuselage briefly in order to attain high design safety. Fatigue is the process of repeated cyclic loading of a component, which leads to an early failure of the same. The sources of fatigue in an aircraft are the parts connected to it, such as the wings, and the differential pressure between the inside of the fuselage and the outside atmosphere as a result of cabin pressurization. The high pressure inside the fuselage tries to expand the fuselage, whereas the stringers and bulk head prevent it from happening. This change in pressure happens frequently and this results in the fatigue of the centre fuselage. The vibratory loads acting on the other parts are transferred to the centre fuselage, which are also major contributors to the fatigue. The centre fuselage of an aircraft was designed using Pro-E software. The standard aluminium alloy was selected for the material. The various loads acting on the centre fuselage were studied and added to the centre fuselage, along with a differential pressure in a cyclic manner.

  18. Crane handbook

    CERN Document Server

    Dickie, D E

    1975-01-01

    Crane Handbook offers extensive advice on how to properly handle a crane. The handbook highlights various safety requirements and rules. The aim of the book is to improve the readers' crane operating skills, which could eventually make the book a standard working guide for training operators. The handbook first reminds the readers that the machine should be carefully tested by a regulatory board before use. The text then notes that choosing the right crane for a particular job is vital and explains why this is the case. It then discusses how well-equipped and durable the crane should be. T

  19. Fatigue and fracture resistance of zirconia crowns prepared with different finish line designs.

    Science.gov (United States)

    Aboushelib, Moustafa N

    2012-01-01

    The aim of this study was to evaluate the effect of finish line design on the fatigue, fracture resistance, and failure type of veneered zirconia restorations. A CAD/CAM system (Cercon) was used to prepare zirconia frameworks (0.5 mm thick) for a maxillary central incisor. Three finish line designs were evaluated: a complete narrow chamfer, a narrow chamfer with a lingual ledge, and a complete ledge. The prepared frameworks were veneered using a press-on ceramic (Ceram Press) and were cemented on the corresponding prepared teeth using a resin cement (Panavia F2.0). The cemented specimens were thermocycled, subjected to dynamic fatigue, and finally loaded till fracture. Fractured specimens were examined under a scanning electron microscope to assess fracture type. One-way ANOVA and Bonferroni post hoc tests were used to analyze the data (α= 0.05). The finish line design did not have any significant statistical influence on the fracture resistance (F = 1.9, p= 0.346) or on the failure type of the tested specimens. Adjusted R squared value (R = 0.049) indicated a weak correlation between finish line design and fracture load of the tested specimens. All specimens failed due to cracking and fracture of the veneer ceramic. Meanwhile, the framework remained entirely intact. Three narrow chamfer finish line specimens demonstrated adhesive fracture of the veneer ceramic during dynamic fatigue testing, related to overextension of the veneer ceramic during the layering procedure. Within the limitations of this study, the finish line design did not influence the fatigue or the fracture resistance of veneered zirconia crowns. Selection of any of the finish line designs should be based on the clinical condition of the restored tooth. © 2011 by the American College of Prosthodontists.

  20. Propagation effects handbook for satellite systems design. A summary of propagation impairments on 10 to 100 GHz satellite links with techniques for system design

    Science.gov (United States)

    Ippolito, Louis J.

    1989-01-01

    The NASA Propagation Effects Handbook for Satellite Systems Design provides a systematic compilation of the major propagation effects experienced on space-Earth paths in the 10 to 100 GHz frequency band region. It provides both a detailed description of the propagation phenomenon and a summary of the impact of the effect on the communications system design and performance. Chapter 2 through 5 describe the propagation effects, prediction models, and available experimental data bases. In Chapter 6, design techniques and prediction methods available for evaluating propagation effects on space-Earth communication systems are presented. Chapter 7 addresses the system design process and how the effects of propagation on system design and performance should be considered and how that can be mitigated. Examples of operational and planned Ku, Ka, and EHF satellite communications systems are given.

  1. Biaxial Fatigue Cracking from Notch

    Science.gov (United States)

    2013-03-04

    Leevers (reference 11) noticed that the variation in  from 0 to 2 has little effect on the da/dN in PVC ( polyvinyl - chloride ), but reduces the da/dN...under biaxial rotating and bending. Ahmad (reference 2) formulated a model for the biaxial fatigue crack growth in aggressive environment, outlined by...1962, Vol. 90, pp. 238-239. 20. ASM Handbook , Vol. 12 Fractography: 1992, p. 430, 438. 21. Metals Handbook , Vol. 9 Fractography and Atlas of

  2. Handbook of graph theory

    CERN Document Server

    Gross, Jonathan L

    2003-01-01

    The Handbook of Graph Theory is the most comprehensive single-source guide to graph theory ever published. Best-selling authors Jonathan Gross and Jay Yellen assembled an outstanding team of experts to contribute overviews of more than 50 of the most significant topics in graph theory-including those related to algorithmic and optimization approaches as well as ""pure"" graph theory. They then carefully edited the compilation to produce a unified, authoritative work ideal for ready reference.Designed and edited with non-experts in mind, the Handbook of Graph Theory makes information easy to fi

  3. Electric power emergency handbook

    Energy Technology Data Exchange (ETDEWEB)

    Labadie, J.R.

    1980-09-01

    The Emergency Electric Power Administration's Emergency Operations Handbook is designed to provide guidance to the EEPA organization. It defines responsibilities and describes actions performed by the government and electric utilities in planning for, and in operations during, national emergencies. The EEPA Handbook is reissued periodically to describe organizational changes, to assign new duties and responsibilities, and to clarify the responsibilities of the government to direct and coordinate the operations of the electric utility industry under emergencies declared by the President. This Handbook is consistent with the assumptions, policies, and procedures contained in the National Plan for Emergency Preparedness. Claimancy and restoration, communications and warning, and effects of nuclear weapons are subjects covered in the appendices.

  4. Above-knee prosthesis design based on fatigue life using finite element method and design of experiment.

    Science.gov (United States)

    Phanphet, Suwattanarwong; Dechjarern, Surangsee; Jomjanyong, Sermkiat

    2017-05-01

    The main objective of this work is to improve the standard of the existing design of knee prosthesis developed by Thailand's Prostheses Foundation of Her Royal Highness The Princess Mother. The experimental structural tests, based on the ISO 10328, of the existing design showed that a few components failed due to fatigue under normal cyclic loading below the required number of cycles. The finite element (FE) simulations of structural tests on the knee prosthesis were carried out. Fatigue life predictions of knee component materials were modeled based on the Morrow's approach. The fatigue life prediction based on the FE model result was validated with the corresponding structural test and the results agreed well. The new designs of the failed components were studied using the design of experimental approach and finite element analysis of the ISO 10328 structural test of knee prostheses under two separated loading cases. Under ultimate loading, knee prosthesis peak von Mises stress must be less than the yield strength of knee component's material and the total knee deflection must be lower than 2.5mm. The fatigue life prediction of all knee components must be higher than 3,000,000 cycles under normal cyclic loading. The design parameters are the thickness of joint bars, the diameter of lower connector and the thickness of absorber-stopper. The optimized knee prosthesis design meeting all the requirements was recommended. Experimental ISO 10328 structural test of the fabricated knee prosthesis based on the optimized design confirmed the finite element prediction. Copyright © 2017 IPEM. Published by Elsevier Ltd. All rights reserved.

  5. Update and Improve Subsection NH –– Alternative Simplified Creep-Fatigue Design Methods

    Energy Technology Data Exchange (ETDEWEB)

    Tai Asayama

    2009-10-26

    This report described the results of investigation on Task 10 of DOE/ASME Materials NGNP/Generation IV Project based on a contract between ASME Standards Technology, LLC (ASME ST-LLC) and Japan Atomic Energy Agency (JAEA). Task 10 is to Update and Improve Subsection NH -- Alternative Simplified Creep-Fatigue Design Methods. Five newly proposed promising creep-fatigue evaluation methods were investigated. Those are (1) modified ductility exhaustion method, (2) strain range separation method, (3) approach for pressure vessel application, (4) hybrid method of time fraction and ductility exhaustion, and (5) simplified model test approach. The outlines of those methods are presented first, and predictability of experimental results of these methods is demonstrated using the creep-fatigue data collected in previous Tasks 3 and 5. All the methods (except the simplified model test approach which is not ready for application) predicted experimental results fairly accurately. On the other hand, predicted creep-fatigue life in long-term regions showed considerable differences among the methodologies. These differences come from the concepts each method is based on. All the new methods investigated in this report have advantages over the currently employed time fraction rule and offer technical insights that should be thought much of in the improvement of creep-fatigue evaluation procedures. The main points of the modified ductility exhaustion method, the strain range separation method, the approach for pressure vessel application and the hybrid method can be reflected in the improvement of the current time fraction rule. The simplified mode test approach would offer a whole new advantage including robustness and simplicity which are definitely attractive but this approach is yet to be validated for implementation at this point. Therefore, this report recommends the following two steps as a course of improvement of NH based on newly proposed creep-fatigue evaluation

  6. Handbook of signal processing systems

    CERN Document Server

    Deprettere, Ed; Leupers, Rainer; Takala, Jarmo

    2013-01-01

    Handbook of Signal Processing Systems is organized in three parts. The first part motivates representative applications that drive and apply state-of-the art methods for design and implementation of signal processing systems; the second part discusses architectures for implementing these applications; the third part focuses on compilers and simulation tools, describes models of computation and their associated design tools and methodologies. This handbook is an essential tool for professionals in many fields and researchers of all levels.

  7. Employee Handbook

    OpenAIRE

    2008-01-01

    Civilian employee handbook governing Naval Postgraduate School, Naval Auxiliary Landing Field, Fleet Numerical Weather Central, and Navy Management Systems Center, and covering expected personal conduct, duties, dress code, and available services.

  8. Area Handbook for Syria.

    Science.gov (United States)

    Nyrop, Richard; And Others

    This volume on Syria is one of a series of handbooks prepared by the Foreign Area Studies (FAS) of the American University, designed to be useful to military and other personnel who need a convenient compilation of basic facts about the social, economic, political, and military institutions and practices of various countries. The emphasis is on…

  9. Area Handbook for Mozambique.

    Science.gov (United States)

    Herrick, Allison Butler

    This publication is one of a series of handbooks prepared by the Foreign Areas Studies (FAS) of The American University, designed to be useful to military and other personnel who need a convenient compilation of basic facts about the social, economic, political and military institutions and practices of various countries. The present handbook…

  10. Area Handbook for Uruguay.

    Science.gov (United States)

    Weil, Thomas E.; And Others

    This volume is one of 62 in a series of handbooks designed to be useful to military and other personnel who need a convenient compilation of basic facts about the social, economic, political, and military institutions and practices of various countries. The emphasis is on objective description of the nation's present society and the kinds of…

  11. Handbook of web surveys

    NARCIS (Netherlands)

    Bethlehem, J.; Biffignandi, S.

    2012-01-01

    Best practices to create and implementhighly effective web surveys Exclusively combining design and sampling issues, Handbook of Web Surveys presents a theoretical yet practical approach to creating and conducting web surveys. From the history of web surveys to various modes of data collection to ti

  12. Optimising and standardising the fatigue design of commercial wood composite wind turbine blades: v. 1

    Energy Technology Data Exchange (ETDEWEB)

    Bond, I.P.; Hacker, C.L.; Ansell, M.P.

    1996-07-01

    The three major objective of the work were to: (a) assess the fatigue performance of wood composite turbine blades incorporating design features which reduce cost, weight and production time by using cheaper and thicker veneers, cheaper resin systems and rapid fabrication techniques; (b) the verification of fatigue design rules using real load spectra from wind farm sites with different wind speeds and turbulence levels, extending damage analysis to new wood species and to commercial joint configurations including scarf and finger joints; (c) incorporate information on the selection and performance of wood composites into type approval procedures and standards for wind turbines. Overall the aim was to contribute to the commercial success of British wind turbines. (Author)

  13. Decommissioning Handbook

    Energy Technology Data Exchange (ETDEWEB)

    1994-03-01

    The Decommissioning Handbook is a technical guide for the decommissioning of nuclear facilities. The decommissioning of a nuclear facility involves the removal of the radioactive and, for practical reasons, hazardous materials to enable the facility to be released and not represent a further risk to human health and the environment. This handbook identifies and technologies and techniques that will accomplish these objectives. The emphasis in this handbook is on characterization; waste treatment; decontamination; dismantling, segmenting, demolition; and remote technologies. Other aspects that are discussed in some detail include the regulations governing decommissioning, worker and environmental protection, and packaging and transportation of the waste materials. The handbook describes in general terms the overall decommissioning project, including planning, cost estimating, and operating practices that would ease preparation of the Decommissioning Plan and the decommissioning itself. The reader is referred to other documents for more detailed information. This Decommissioning Handbook has been prepared by Enserch Environmental Corporation for the US Department of Energy and is a complete restructuring of the original handbook developed in 1980 by Nuclear Energy Services. The significant changes between the two documents are the addition of current and the deletion of obsolete technologies and the addition of chapters on project planning and the Decommissioning Plan, regulatory requirements, characterization, remote technology, and packaging and transportation of the waste materials.

  14. Fatigue criterion to system design, life and reliability: A primer

    Science.gov (United States)

    Zaretsky, Erwin V.

    1992-01-01

    A method for estimating a component's design survivability by incorporating finite element analysis and probabilistic material properties was developed. The method evaluates design parameters through direct comparisons of component survivability expressed in terms of Weibull parameters. The analysis was applied to a rotating disk with mounting bolt holes. The highest probability of failure occurred at, or near, the maximum shear stress region of the bolt holes. Distribution of material failure as a function of Weibull slope affects the probability of survival. Where Weibull parameters are unknown for a rotating disk, it may be permissible to assume Weibull parameters, as well as the stress-life exponent, in order to determine the qualitative effect of disk speed on the probability of survival.

  15. Gen IV Materials Handbook Functionalities and Operation (2B) Handbook Version 2.0

    Energy Technology Data Exchange (ETDEWEB)

    Ren, Weiju [ORNL

    2011-08-01

    This document is prepared for navigation and operation of the Gen IV Materials Handbook, with architecture description and new user access initiation instructions. Development rationale and history of the Handbook is summarized. The major development aspects, architecture, and design principles of the Handbook are briefly introduced to provide an overview of its past evolution and future prospects. Detailed instructions are given with examples for navigating the constructed Handbook components and using the main functionalities. Procedures are provided in a step-by-step fashion for Data Upload Managers to upload reports and data files, as well as for new users to initiate Handbook access.

  16. Gen IV Materials Handbook Functionalities and Operation (4A) Handbook Version 4.0

    Energy Technology Data Exchange (ETDEWEB)

    Ren, Weiju [ORNL

    2013-09-01

    This document is prepared for navigation and operation of the Gen IV Materials Handbook, with architecture description and new user access initiation instructions. Development rationale and history of the Handbook is summarized. The major development aspects, architecture, and design principles of the Handbook are briefly introduced to provide an overview of its past evolution and future prospects. Detailed instructions are given with examples for navigating the constructed Handbook components and using the main functionalities. Procedures are provided in a step-by-step fashion for Data Upload Managers to upload reports and data files, as well as for new users to initiate Handbook access.

  17. Design of PF-1 Coil Helium Inlet and Dummy Joint Samples for Fatigue Tests at 77K

    Science.gov (United States)

    Nasluzov, S. N.; Sukhanova, M. V.; Rodin, I. Yu.; Marushin, E. L.; Mednikov, A. A.; Stepanov, D. B.; Lantsetov, A. A.; Khitruk, A. A.

    A helium inlet and dummy joint between conductors are one of the most important elements of the winding pack of the ITER PF -1 coil double pancakes. A helium inlet is used for letting liquid helium into the PF-1 coil conductor. A full-scale helium inlet sample for fatigue tests and the respective tooling were designed and manufactured. Fatigue tests of the full-scale helium inlet sample were conducted in accordance with ITER requirements testing parameters in order to check the fatigue strength of the structure. Before the fatigue tests thermo-cycling of the helium inlet in the temperature range of 77 to 293 K was conducted. Before and after the fatigue tests the leak tightness of the full-scale helium inlet sample was validated by the vacuum chamber method. A low ohm electrical joint is used to connect two NbTi «CICC» conductors of PF-1 coil into a single electrical loop. To qualify the design and technology of manufacturing of the electrical joint, a full-scale dummy joint sample was developed for fatigue tests at 77 K. The main design feature of the full-scale dummy joint sample for fatigue tests is a symmetrical model of two dummy joint samples with simultaneous loading to compensate the bending moment. Fatigue tests of the full-scale helium inlet sample at 77 K have been successfully conducted in 2013. Fatigue tests of the full-scale dummy joint sample will be conducted in 2014. This paper represents the results of calculating the stress-strain state of the symmetrical model of the full-scale dummy joint sample for fatigue tests with the prescribed loading and strain, the work on designing the symmetrical model of the dummy joint sample for fatigue tests and the test facility for conducting fatigue tests at 77 K. Also the results of the leak tightness tests and thermo-cycling of the full-scale helium inlet and the results of it fatigue tests at 77 K, are presented.

  18. Research for the design of visual fatigue based on the computer visual communication

    Science.gov (United States)

    Deng, Hu-Bin; Ding, Bao-min

    2013-03-01

    With the era of rapid development of computer networks. The role of network communication in the social, economic, political, become more and more important and suggested their special role. The computer network communicat ion through the modern media and byway of the visual communication effect the public of the emotional, spiritual, career and other aspects of the life. While its rapid growth also brought some problems, It is that their message across to the public, its design did not pass a relat ively perfect manifestation to express the informat ion. So this not only leads to convey the error message, but also to cause the physical and psychological fatigue for the audiences. It is said that the visual fatigue. In order to reduce the fatigue when people obtain the useful information in using computer. Let the audience in a short time to obtain the most useful informat ion, this article gave a detailed account of its causes, and propose effective solutions and, through the specific examples to explain it, also in the future computer design visual communicat ion applications development prospect.

  19. Practical electronics handbook

    CERN Document Server

    Sinclair, Ian R

    2013-01-01

    Practical Electronics Handbook, Third Edition provides the frequently used and highly applicable principles of electronics and electronic circuits.The book contains relevant information in electronics. The topics discussed in the text include passive and active discrete components; linear and digital I.C.s; microprocessors and microprocessor systems; digital-analogue conversions; computer aids in electronics design; and electronic hardware components.Electronic circuit constructors, service engineers, electronic design engineers, and anyone with an interest in electronics will find the book ve

  20. Creep-Fatigue Relationsihps in Electroactive Polymer Systems and Predicted Effects in an Actuator Design

    Science.gov (United States)

    Vinogradov, Aleksandra M.; Ihlefeld, Curtis M.; Henslee, Issac

    2009-01-01

    The paper concerns the time-dependent behavior of electroactive polymers (EAP) and their use in advanced intelligent structures for space exploration. Innovative actuator design for low weight and low power valves required in small plants planned for use on the moon for chemical analysis is discussed. It is shown that in-depth understanding of cyclic loading effects observed through accelerated creep rates due to creep-fatigue interaction in polymers is critical in terms of proper functioning of EAP based actuator devices. In the paper, an overview of experimental results concerning the creep properties and cyclic creep response of a thin film piezoelectric polymer polyvinylidene fluoride (PVDF) is presented. The development of a constitutive creep-fatigue interaction model to predict the durability and service life of electroactive polymers is discussed. A novel method is proposed to predict damage accumulation and fatigue life of polymers under oyclic loading conditions in the presence of creep. The study provides a basis for ongoing research initiatives at the NASA Kennedy Space Center in the pursuit of new technologies using EAP as active elements for lunar exploration systems.

  1. INVESTIGATION OF FRACTURE DESIGN FOR MEDIUM CARBON STEEL UNDER EXTRA-LOW CYCLIC FATIGUE IN AXIAL LOADING

    Institute of Scientific and Technical Information of China (English)

    Youtang Li; Shuai Tan; Hongyan Duan

    2008-01-01

    The extra-low cyclic fracture problem of medium carbon steel under axial fatigue loading was investigated.Several problems,such as the relations of the cycle times to the depth and tip radius of the notch,loading frequency,loading range and the parameters of fracture design for medium carbon steel on condition of extra-low axial fatigue loading were discussed based on the experiments.Experimental results indicated that the tension-pressure fatigue loading mode was suitable for extra-low cyclic fatigue fracture design of medium carbon steel and it resulted in low energy consumption,fracture surface with high quality,low cycle times,and high efficiency.The appropriate parameters were as follows:loading frequency 3-5 Hz,notch tip radius r=(0.2-0.3)mm,opening angle α=60°,and notch depth t=(0.14-0.17)D.

  2. Handbook of unmanned aerial vehicles

    CERN Document Server

    Vachtsevanos, George

    2015-01-01

    The Handbook of Unmanned Aerial Vehicles is a reference text for the academic and research communities, industry, manufacturers, users, practitioners, Federal Government, Federal and State Agencies, the private sector, as well as all organizations that are and will be using unmanned aircraft in a wide spectrum of applications. The Handbook covers all aspects of UAVs, from design to logistics and ethical issues. It is also targeting the young investigator, the future inventor and entrepreneur by providing an overview and detailed information of the state-of-the-art as well as useful new concepts that may lead to innovative research. The contents of the Handbook include material that addresses the needs and ‘know how’ of all of the above sectors targeting a very diverse audience. The Handbook offers a unique and comprehensive treatise of everything one needs to know about unmanned aircrafts, from conception to operation, from technologies to business activities, users, OEMs, reference sources, conferences, ...

  3. Flight Control System Reliability and Maintainability Investigations. Appendix F. Design Handbook Change Resommendations, AFSC Design Handbook, DH-2- 1, DH-2-X.

    Science.gov (United States)

    1975-03-01

    wij i-ii!, . 8 mckWiriri A.^ FVR «.-BI P’.C.I. 7. <HTtF"l«l RAtlAl tllAi’V ,. ,0003 TO .Cri09 INCH 8. p-M’i.;. /.■•o i ATF’.L r; 11 nif ...5 (or U.08) times the B;LO design life, d , has already been determined, is given as J ^ (9.^9 log Ps) 0-7Z46 d e toT\\-- k.08 B10 and (2...J i (9.49 logo Ps) 0.856 for 4 = 5.00 B10 (3) ^-^ ( 98 90 80 70 60 _ — - W - /M - )t V - /> SO 40 30 20 * r -• 8 s

  4. IFSIM Handbook

    OpenAIRE

    Baroni, Elisa; Zamac, Jovan; Öberg, Gustav

    2009-01-01

    This handbook explains the simulation model IFSIM. IFSIM is an agent based simulation model written in JAVA. The model is constructed for analyzing demographic and economic issues. The aim of the model is to include the main consumption and production patterns over the life-cycle and thus being able to test demo-economic interactions.

  5. Ambulance Handbook

    Science.gov (United States)

    1976-01-01

    Johnson Space Center has devised a checklist for the skylab inflight medical support system that has been transferred for public emergencies. The checklist illustrates a procedure for diagnosis, treatment, and stabilization of a wide variety of emergencies. Handbook presents comprehensive ordered description of emergency medical equipment and its use in treating victims. Paramedics assigned to the Houston Fire Department are now using the checklist.

  6. Handbook of satellite applications

    CERN Document Server

    Madry, Scott; Camacho-Lara, Sergio

    2013-01-01

    Top space experts from around the world have collaborated to produce this comprehensive, authoritative, and clearly illustrated reference guide to the fast growing, multi-billion dollar field of satellite applications and space communications. This handbook, done under the auspices of the International Space University based in France, addresses not only system technologies but also examines market dynamics, technical standards and regulatory constraints. The handbook is a completely multi-disciplinary reference book that covers, in an in-depth fashion, the fields of satellite telecommunications, Earth observation, remote sensing, satellite navigation, geographical information systems, and geosynchronous meteorological systems. It covers current practices and designs as well as advanced concepts and future systems. It provides a comparative analysis of the common technologies and design elements for satellite application bus structures, thermal controls, power systems, stabilization techniques, telemetry, com...

  7. Stop the Bullying: A Handbook for Schools.

    Science.gov (United States)

    Rigby, Ken

    Noting that bullying in school is a growing concern in Australian communities, this handbook draws upon a 10-year study of bullying in Australian schools and is designed to help educators find out what is happening in their school and develop sound anti-bullying policies. The handbook also provides guidance in working effectively with students to…

  8. Alberta Associations for Bright Children Members' Handbook.

    Science.gov (United States)

    Alberta Association for Bright Children, Edmonton.

    This handbook is designed to provide information to parents of gifted children in Alberta, Canada. The handbook outlines the mission and objectives of the Alberta Associations for Bright Children and describes the structure of the non-profit organization. The booklet then addresses: (1) the characteristics of gifted children; (2) the rights of…

  9. Handbook of lubrication and tribology, v.II theory and design

    CERN Document Server

    Bruce, Robert W

    2012-01-01

    Theory and Practice of Lubrication and TribologyTribologyKenneth C LudemaSurface AnalysisIrwin L. SingerRoughnessChristopher A. BrownContact MechanicsGeorge G. AdamsFrictionPeter J. BlauWear: A Synoptic ViewShyam BahadurAdhesive WearKyriakos KomvopoulosAbrasive WearKoji KatoRolling Contact Fatigue WearMichael N. KotzalasFrettingThomas N. Farris and N. SundaramErosionAwatef A. HamedOxidative WearJohn R. Nicholls and Richard G. WellmanWear ModelsKenneth Holmberg and Anssi LaukkanenLubricationRobert L. JacksonHydrostatic LubricationGregory J. KostrzewskyHydrodynamic LubricationJohn A. TichyCompre

  10. The clinical nanomedicine handbook

    CERN Document Server

    Brenner, Sara

    2013-01-01

    Designed to foster a stronger awareness and exploration of the subject by practicing clinicians, medical researchers and scientists, The Clinical Nanomedicine Handbook discusses the integration of nanotechnology, biology, and medicine from a clinical point of view. The book highlights relevant research and applications by specialty; it examines nanotechnology in depth, and the potential to solve medical problems. It also increases literacy in nanotechnology, and allows for more effective communication and collaboration between disciplines. Details worldwide developments in nanomedicine Provide

  11. Energy emergency handbook

    Energy Technology Data Exchange (ETDEWEB)

    1979-01-01

    This Handbook identifies selected state and federal measures available to mitigate the impact of an energy emergency, and provides a comprehensive energy emergency communications directory. In the case of state remedial actions, particular emphasis has been placed on typical implementation procedures and likely impacts. The discussions of federal actions focus on initation and implementation procedures. The directory is designed to facilitate communications of all types (telephone, Telex, TWX, or facsimile) among key energy emergency officials in the federal and state governments.

  12. Handbook of networking & connectivity

    CERN Document Server

    McClain, Gary R

    1994-01-01

    Handbook of Networking & Connectivity focuses on connectivity standards in use, including hardware and software options. The book serves as a guide for solving specific problems that arise in designing and maintaining organizational networks.The selection first tackles open systems interconnection, guide to digital communications, and implementing TCP/IP in an SNA environment. Discussions focus on elimination of the SNA backbone, routing SNA over internets, connectionless versus connection-oriented networks, internet concepts, application program interfaces, basic principles of layering, proto

  13. Power vacuum tubes handbook

    CERN Document Server

    Whitaker, Jerry

    2012-01-01

    Providing examples of applications, Power Vacuum Tubes Handbook, Third Edition examines the underlying technology of each type of power vacuum tube device in common use today. The author presents basic principles, reports on new development efforts, and discusses implementation and maintenance considerations. Supporting mathematical equations and extensive technical illustrations and schematic diagrams help readers understand the material. Translate Principles into Specific Applications This one-stop reference is a hands-on guide for engineering personnel involved in the design, specification,

  14. Handbook of industrial lighting

    CERN Document Server

    Lyons, Stanley L

    2013-01-01

    Handbook of Industrial Lighting is a practical guide on the specification, design, installation, operation, and maintenance of lighting in industrial premises. Coverage of the book includes the importance of good localized lighting; the different lighting schemes; lighting for difficult visual tasks; lighting in consideration to safety; and emergency lighting. The book also includes the practical, thermal, ventilation, and energy considerations; lighting in different environments; maintenance of lighting installations; and the cost benefits of efficient lighting. Appendices include useful info

  15. The Significance of Small Cracks in Fatigue Design Concepts as Related to Rotorcraft Metallic Dynamic Components

    Science.gov (United States)

    Everett, R. A., Jr.; Elber, W.

    2000-01-01

    In this paper the significance of the "small" crack effect as defined in fracture mechanics will be discussed as it relates to life managing rotorcraft dynamic components using the conventional safe-life, the flaw tolerant safe-life, and the damage tolerance design philosophies. These topics will be introduced starting with an explanation of the small-crack theory, then showing how small-crack theory has been used to predict the total fatigue life of fatigue laboratory test coupons with and without flaws, and concluding with how small cracks can affect the crack-growth damage tolerance design philosophy. As stated in this paper the "small" crack effect is defined in fracture mechanics where it has been observed that cracks on the order of 300 microns or less in length will propagate at higher growth rates than long cracks and also will grow at AK values below the long crack AK threshold. The small-crack effect is illustrated herein as resulting from a lack of crack closure and is explained based on continuum mechanics principles using crack-closure concepts in fracture mechanics.

  16. The Influence of PV Module Materials and Design on Solder Joint Thermal Fatigue Durability

    Energy Technology Data Exchange (ETDEWEB)

    Bosco, Nick; Silverman, Timothy J.; Kurtz, Sarah

    2016-11-01

    Finite element model (FEM) simulations have been performed to elucidate the effect of flat plate photovoltaic (PV) module materials and design on PbSn eutectic solder joint thermal fatigue durability. The statistical method of Latin Hypercube sampling was employed to investigate the sensitivity of simulated damage to each input variable. Variables of laminate material properties and their thicknesses were investigated. Using analysis of variance, we determined that the rate of solder fatigue was most sensitive to solder layer thickness, with copper ribbon and silicon thickness being the next two most sensitive variables. By simulating both accelerated thermal cycles (ATCs) and PV cell temperature histories through two characteristic days of service, we determined that the acceleration factor between the ATC and outdoor service was independent of the variables sampled in this study. This result implies that an ATC test will represent a similar time of outdoor exposure for a wide range of module designs. This is an encouraging result for the standard ATC that must be universally applied across all modules.

  17. Fatigue based design and analysis of wheel hub for Student formula car by Simulation Approach

    Science.gov (United States)

    Gowtham, V.; Ranganathan, A. S.; Satish, S.; Alexis, S. John; Siva kumar, S.

    2016-09-01

    In the existing design of Wheel hub used for Student formula cars, the brake discs cannot be removed easily since the disc is mounted in between the knuckle and hub. In case of bend or any other damage to the disc, the replacement of the disc becomes difficult. Further using OEM hub and knuckle that are used for commercial vehicles will result in increase of unsprung mass, which should be avoided in Student formula cars for improving the performance. In this design the above mentioned difficulties have been overcome by redesigning the hub in such a way that the brake disc could be removed easily by just removing the wheel and the caliper and also it will have reduced weight when compared to existing OEM hub. A CAD Model was developed based on the required fatigue life cycles. The forces acting on the hub were calculated and linear static structural analysis was performed on the wheel hub for three different materials using ANSYS Finite Element code V 16.2. The theoretical fatigue strength was compared with the stress obtained from the structural analysis for each material.

  18. Loudspeaker handbook

    CERN Document Server

    Eargle, John

    2003-01-01

    The second edition of Loudspeaker Handbook follows the same general outlines as the highly successful first edition and has been augmented and updated in many areas of technology. Most notable are the developments in large-scale, programmable line arrays, distributed mode loudspeakers, and ultrasonic-based audio transduction. Additionally, the core chapters on low frequency systems, system concepts, and horn systems have been expanded to include both more analytical material and a richer array of examples. Much of the success of the first edition has been due to its accessibility both to loudspeaker engineers and to lay technicians working in the field - a point of view the author maintains in the present work. A full understanding of the underlying technology requires a fairly rigorous engineering background through the second year of professional study. At the same time, the generous use of graphs, with their intuitive thrust, will be useful to all readers. Loudspeaker Handbook, Second Edition continues to ...

  19. Handbook of sustainable engineering

    CERN Document Server

    Lee, Kun-Mo

    2013-01-01

    "The efficient utilization of energy, sustainable use of natural resources, and large-scale adoption of sustainable technologies is the key to a sustainable future. The Handbook of Sustainable Engineering provides tools that will help us achieve these goals". Nobel Prize Winner Dr. R.K. Pauchauri, Chairman, UN Intergovernmental Panel on Climate Change As global society confronts the challenges of diminishing resources, ecological degradation, and climate change, engineers play a crucial role designing and building technologies and products that fulfil our needs for utility and sustainability. The Handbook of Sustainable Engineering equips readers with the context and the best practices derived from both academic research and practical examples of successful implementations of sustainable technical solutions. The handbook’s content revolves around the two themes, new ways of thinking and new business models, including sustainable production, products, service systems and consumption while addressing key asse...

  20. Nanobiomaterials handbook

    CERN Document Server

    Sitharaman, Balaji

    2011-01-01

    Nanobiomaterials exhibit distinctive characteristics, including mechanical, electrical, and optical properties, which make them suitable for a variety of biological applications. Because of their versatility, they are poised to play a central role in nanobiotechnology and make significant contributions to biomedical research and healthcare. Nanobiomaterials Handbook provides a comprehensive overview of the field, offering a broad introduction for those new to the subject as well as a useful reference for advanced professionals.Analyzing major topics and disciplines in this arena, this volume:

  1. The composite materials handbook (MIL handbook 17). Volume 1: Guidelines for characterization of structural materials

    Energy Technology Data Exchange (ETDEWEB)

    1999-01-01

    The Composite Materials Handbook (MIL Handbook 17) is THE source for data and usage guidelines for current and emerging polymer matrix composite materials. It provides the tools needed to design and fabricate end items from polymer matrix composite materials and offers guidelines for how these data should be generated and used. The Handbook is a comprehensive guide of composites technology and engineering, an area that is advancing and changing rapidly. Volume 1 explains the methods by which materials property data should be obtained, and criteria for their acceptance for publication in the Handbook.

  2. AVR RISC microcontroller handbook

    CERN Document Server

    Kuhnel, Claus

    1998-01-01

    The AVR RISC Microcontroller Handbook is a comprehensive guide to designing with Atmel's new controller family, which is designed to offer high speed and low power consumption at a lower cost. The main text is divided into three sections: hardware, which covers all internal peripherals; software, which covers programming and the instruction set; and tools, which explains using Atmel's Assembler and Simulator (available on the Web) as well as IAR's C compiler.Practical guide for advanced hobbyists or design professionalsDevelopment tools and code available on the Web

  3. Circuits and filters handbook

    CERN Document Server

    Chen, Wai-Kai

    2003-01-01

    A bestseller in its first edition, The Circuits and Filters Handbook has been thoroughly updated to provide the most current, most comprehensive information available in both the classical and emerging fields of circuits and filters, both analog and digital. This edition contains 29 new chapters, with significant additions in the areas of computer-aided design, circuit simulation, VLSI circuits, design automation, and active and digital filters. It will undoubtedly take its place as the engineer's first choice in looking for solutions to problems encountered in the design, analysis, and behavi

  4. Centrifugal pump handbook

    CERN Document Server

    Pumps, Sulzer

    2010-01-01

    This long-awaited new edition is the complete reference for engineers and designers working on pump design and development or using centrifugal pumps in the field. This authoritative guide has been developed with access to the technical expertise of the leading centrifugal pump developer, Sulzer Pumps. In addition to providing the most comprehensive centrifugal pump theory and design reference with detailed material on cavitation, erosion, selection of materials, rotor vibration behavior and forces acting on pumps, the handbook also covers key pumping applications topics and operational

  5. Handbook of signal processing systems

    CERN Document Server

    Bhattacharyya, Shuvra S; Leupers, Rainer; Takala, Jarmo

    2010-01-01

    The Handbook is organized in four parts. The first part motivates representative applications that drive and apply state-of-the art methods for design and implementation of signal processing systems; the second part discusses architectures for implementing these applications; the third part focuses on compilers and simulation tools; and the fourth part describes models of computation and their associated design tools and methodologies.

  6. Design of Linear Control System for Wind Turbine Blade Fatigue Testing

    Science.gov (United States)

    Toft, Anders; Roe-Poulsen, Bjarke; Christiansen, Rasmus; Knudsen, Torben

    2016-09-01

    This paper proposes a linear method for wind turbine blade fatigue testing at Siemens Wind Power. The setup consists of a blade, an actuator (motor and load mass) that acts on the blade with a sinusoidal moment, and a distribution of strain gauges to measure the blade flexure. Based on the frequency of the sinusoidal input, the blade will start oscillating with a given gain, hence the objective of the fatigue test is to make the blade oscillate with a controlled amplitude. The system currently in use is based on frequency control, which involves some non-linearities that make the system difficult to control. To make a linear controller, a different approach has been chosen, namely making a controller which is not regulating on the input frequency, but on the input amplitude. A non-linear mechanical model for the blade and the motor has been constructed. This model has been simplified based on the desired output, namely the amplitude of the blade. Furthermore, the model has been linearised to make it suitable for linear analysis and control design methods. The controller is designed based on a simplified and linearised model, and its gain parameter determined using pole placement. The model variants have been simulated in the MATLAB toolbox Simulink, which shows that the controller design based on the simple model performs adequately with the non-linear model. Moreover, the developed controller solves the robustness issue found in the existent solution and also reduces the needed energy for actuation as it always operates at the blade eigenfrequency.

  7. Development of a Cast Iron Fatigue Properties Database for use with Modern Design Methods

    Energy Technology Data Exchange (ETDEWEB)

    DeLa' O, James, D.; Gundlach, Richard, B.; Tartaglia, John, M.

    2003-09-18

    A reliable and comprehensive database of design properties for cast iron is key to full and efficient utilization of this versatile family of high production-volume engineering materials. A database of strain-life fatigue properties and supporting data for a wide range of structural cast irons representing industry standard quality was developed in this program. The database primarily covers ASTM/SAE standard structural grades of ADI, CGI, ductile iron and gray iron as well as an austempered gray iron. Twenty-two carefully chosen materials provided by commercial foundries were tested and fifteen additional datasets were contributed by private industry. The test materials are principally distinguished on the basis of grade designation; most grades were tested in a 25 mm section size and in a single material condition common for the particular grade. Selected grades were tested in multiple sections-sizes and/or material conditions to delineate the properties associated with a range of materials for the given grade. The cyclic properties are presented in terms of the conventional strain-life formalism (e.g., SAE J1099). Additionally, cyclic properties for gray iron and CGI are presented in terms of the Downing Model, which was specifically developed to treat the unique stress-strain response associated with gray iron (and to a lesser extent with CGI). The test materials were fully characterized in terms of alloy composition, microstructure and monotonic properties. The CDROM database presents the data in various levels of detail including property summaries for each material, detailed data analyses for each specimen and raw monotonic and cyclic stress-strain data. The CDROM database has been published by the American Foundry Society (AFS) as an AFS Research Publication entitled ''Development of a Cast Iron Fatigue Properties Database for Use in Modern Design Methods'' (ISDN 0-87433-267-2).

  8. Handbook of smoke control engineering

    CERN Document Server

    Klote, John H; Turnbull, Paul G; Kashef, Ahmed; Ferreira, Michael J

    2012-01-01

    The Handbook of Smoke Control Engineering extends the tradition of the comprehensive treatment of smoke control technology, including fundamental concepts, smoke control systems, and methods of analysis. The handbook provides information needed for the analysis of design fires, including considerations of sprinklers, shielded fires, and transient fuels. It is also extremely useful for practicing engineers, architects, code officials, researchers, and students. Following the success of Principles of Smoke Management in 2002, this new book incorporates the latest research and advances in smoke control practice. New topics in the handbook are: controls, fire and smoke control in transport tunnels, and full-scale fire testing. For those getting started with the computer models CONTAM and CFAST, there are simplified instructions with examples. This is the first smoke control book with climatic data so that users will have easy-to-use weather data specifically for smoke control design for locations in the U.S., Can...

  9. Solar cell array design handbook - The principles and technology of photovoltaic energy conversion

    Science.gov (United States)

    Rauschenbach, H. S.

    1980-01-01

    Photovoltaic solar cell array design and technology for ground-based and space applications are discussed from the user's point of view. Solar array systems are described, with attention given to array concepts, historical development, applications and performance, and the analysis of array characteristics, circuits, components, performance and reliability is examined. Aspects of solar cell array design considered include the design process, photovoltaic system and detailed array design, and the design of array thermal, radiation shielding and electromagnetic components. Attention is then given to the characteristics and design of the separate components of solar arrays, including the solar cells, optical elements and mechanical elements, and the fabrication, testing, environmental conditions and effects and material properties of arrays and their components are discussed.

  10. Solar cell array design handbook - The principles and technology of photovoltaic energy conversion

    Science.gov (United States)

    Rauschenbach, H. S.

    1980-01-01

    Photovoltaic solar cell array design and technology for ground-based and space applications are discussed from the user's point of view. Solar array systems are described, with attention given to array concepts, historical development, applications and performance, and the analysis of array characteristics, circuits, components, performance and reliability is examined. Aspects of solar cell array design considered include the design process, photovoltaic system and detailed array design, and the design of array thermal, radiation shielding and electromagnetic components. Attention is then given to the characteristics and design of the separate components of solar arrays, including the solar cells, optical elements and mechanical elements, and the fabrication, testing, environmental conditions and effects and material properties of arrays and their components are discussed.

  11. User's design handbook for a Standardized Control Module (SCM) for DC to DC Converters, volume 2

    Science.gov (United States)

    Lee, F. C.

    1980-01-01

    A unified design procedure is presented for selecting the key SCM control parameters for an arbitrarily given power stage configuration and parameter values, such that all regulator performance specifications can be met and optimized concurrently in a single design attempt. All key results and performance indices, for buck, boost, and buck/boost switching regulators which are relevant to SCM design considerations are included to facilitate frequent references.

  12. Finding fatigue resistant and lightweight designs using the optimization methods CAO and SKO

    Science.gov (United States)

    Mattheck, C.; Walther, Frank; Baumgartner, A.

    1992-07-01

    Computer Aided Optimization (CAO), a new method of shape optimization based on the computer simulation of biological growth and Soft Kill Option (SKO), and a strategy to find new design solutions with reduced weight are presented. CAO is used to improve the design of technical components by gaining a homogenized stress distribution on the surface of two and three dimensional finite element models. SKO helps to define new topologies starting from a general oversized 'design area'. With CAO it is also possible to simulate the 'adaptive growth' of biological load carriers, while SKO simulates the mineralization process of bones adapted to their loading. The main ideas of the methods are outlined and several examples of optimizations are shown. If completely new solutions for technical problems are desired, SKO is used first and the design proposal being found is then optimized by CAO in order to achieve a lightweight and fatigue resistant design. The efficiency of the combination of the two methods as a complete layout procedure is shown.

  13. Site characterization handbook

    Energy Technology Data Exchange (ETDEWEB)

    1988-06-01

    This Handbook discusses both management and technical elements that should be considered in developing a comprehensive site characterization program. Management elements typical of any project of a comparable magnitude and complexity are combined with a discussion of strategies specific to site characterization. Information specific to the technical elements involved in site characterization is based on guidance published by the Nuclear Regulatory Commission (NRC) with respect to licensing requirements for LLW disposal facilities. The objective of this Handbook is to provide a reference for both NRC Agreement States and non-Agreement States for use in developing a comprehensive site characterization program that meets the specific objectives of the State and/or site developer/licensee. Each site characterization program will vary depending on the objectives, licensing requirements, schedules/budgets, physical characteristics of the site, proposed facility design, and the specific concerns raised by government agencies and the public. Therefore, the Handbook is not a prescriptive guide to site characterization. 18 refs., 6 figs.

  14. Site characterization handbook

    Energy Technology Data Exchange (ETDEWEB)

    1988-06-01

    This Handbook discusses both management and technical elements that should be considered in developing a comprehensive site characterization program. Management elements typical of any project of a comparable magnitude and complexity are combined with a discussion of strategies specific to site characterization. Information specific to the technical elements involved in site characterization is based on guidance published by the Nuclear Regulatory Commission (NRC) with respect to licensing requirements for LLW disposal facilities. The objective of this Handbook is to provide a reference for both NRC Agreement States and non-Agreement States for use in developing a comprehensive site characterization program that meets the specific objectives of the State and/or site developer/licensee. Each site characterization program will vary depending on the objectives, licensing requirements, schedules/budgets, physical characteristics of the site, proposed facility design, and the specific concerns raised by government agencies and the public. Therefore, the Handbook is not a prescriptive guide to site characterization. 18 refs., 6 figs.

  15. Handbook of metaheuristics

    CERN Document Server

    Potvin, Jean-Yves

    2010-01-01

    “… an excellent book if you want to learn about a number of individual metaheuristics." (U. Aickelin, Journal of the Operational Research Society, Issue 56, 2005, on the First Edition) The first edition of the Handbook of Metaheuristics was published in 2003 under the editorship of Fred Glover and Gary A. Kochenberger. Given the numerous developments observed in the field of metaheuristics in recent years, it appeared that the time was ripe for a second edition of the Handbook. When Glover and Kochenberger were unable to prepare this second edition, they suggested that Michel Gendreau and Jean-Yves Potvin should take over the editorship, and so this important new edition is now available. Through its 21 chapters, this second edition is designed to provide a broad coverage of the concepts, implementations and applications in this important field of optimization. Original contributors either revised or updated their work, or provided entirely new chapters. The Handbook now includes updated chapters on the b...

  16. CTBT technical issues handbook

    Energy Technology Data Exchange (ETDEWEB)

    Zucca, J.J. [ed.

    1994-05-01

    The purpose of this handbook is to give the nonspecialist in nuclear explosion physics and nuclear test monitoring an introduction to the topic as it pertains to a Comprehensive Test Ban Treaty (CTBT). The authors have tried to make the handbook visually oriented, with figures paired to short discussions. As such, the handbook may be read straight through or in sections. The handbook covers four main areas and ends with a glossary, which includes both scientific terms and acronyms likely to be encountered during CTBT negotiations. The following topics are covered: (1) Physics of nuclear explosion experiments. This is a description of basic nuclear physics and elementary nuclear weapon design. Also discussed are testing practices. (2) Other nuclear experiments. This section discusses experiments that produce small amounts of nuclear energy but differ from explosion experiments discussed in the first chapter. This includes the type of activities, such as laser fusion, that would continue after a CTBT is in force. (3) Monitoring tests in various environments. This section describes the different physical environments in which a test could be conducted (underground, in the atmosphere, in space, underwater, and in the laboratory); the sources of non-nuclear events (such as earthquakes and mining operations); and the opportunities for evasion. (4) On-site inspections. A CTBT is likely to include these inspections as an element of the verification provisions, in order to resolve the nature of ambiguous events. This chapter describes some technical considerations and technologies that are likely to be useful. (5) Selecting verification measures. This chapter discusses the uncertain nature of the evidence from monitoring systems and how compliance judgments could be made, taking the uncertainties into account. It also discusses how to allocate monitoring resources, given the likelihood of testing by various countries in various environments.

  17. Handbook of experiences in the design and installation of solar heating and cooling systems

    Energy Technology Data Exchange (ETDEWEB)

    Ward, D.S.; Oberoi, H.S.

    1980-07-01

    A large array of problems encountered are detailed, including design errors, installation mistakes, cases of inadequate durability of materials and unacceptable reliability of components, and wide variations in the performance and operation of different solar systems. Durability, reliability, and design problems are reviewed for solar collector subsystems, heat transfer fluids, thermal storage, passive solar components, piping/ducting, and reliability/operational problems. The following performance topics are covered: criteria for design and performance analysis, domestic hot water systems, passive space heating systems, active space heating systems, space cooling systems, analysis of systems performance, and performance evaluations. (MHR)

  18. Handbook of Plastic Welding

    DEFF Research Database (Denmark)

    Islam, Aminul

    The purpose of this document is to summarize the information about the laser welding of plastic. Laser welding is a matured process nevertheless laser welding of micro dimensional plastic parts is still a big challenge. This report collects the latest information about the laser welding of plasti...... as a knowledge handbook for laser welding of plastic components. This document should provide the information for all aspects of plastic laser welding and help the design engineers to take all critical issues into consideration from the very beginning of the design phase....

  19. The VLSI handbook

    CERN Document Server

    Chen, Wai-Kai

    2007-01-01

    Written by a stellar international panel of expert contributors, this handbook remains the most up-to-date, reliable, and comprehensive source for real answers to practical problems. In addition to updated information in most chapters, this edition features several heavily revised and completely rewritten chapters, new chapters on such topics as CMOS fabrication and high-speed circuit design, heavily revised sections on testing of digital systems and design languages, and two entirely new sections on low-power electronics and VLSI signal processing. An updated compendium of references and othe

  20. Heat pump planning handbook

    CERN Document Server

    Bonin, Jürgen

    2015-01-01

    The Heat Pump Planning Handbook contains practical information and guidance on the design, planning and selection of heat pump systems, allowing engineers, designers, architects and construction specialists to compare a number of different systems and options. Including detailed descriptions of components and their functions and reflecting the current state of technology this guide contains sample tasks and solutions as well as new model calculations and planning evaluations. Also economic factors and alternative energy sources are covered, which are essential at a time of rising heat costs. T

  1. Handbook of electromagnetic compatibility

    CERN Document Server

    1995-01-01

    This""know-how""book gives readers a concise understanding of the fundamentals of EMC, from basic mathematical and physical concepts through present, computer-age methods used in analysis, design, and tests. With contributions from leading experts in their fields, the text provides a comprehensive overview. Fortified with information on how to solve potential electromagnetic interference (EMI) problems that may arise in electronic design, practitioners will be betterable to grasp the latest techniques, trends, and applications of this increasingly important engineering discipline.Handbook of E

  2. Acupuncture for Symptomatic Treatment of Fatigue in Parkinson's Disease: Trial Design and Implementation.

    Science.gov (United States)

    Corbin, Lisa; Childs, Rebecca; Dilli, Caitlin; Christian, Mary K; Wong, Ban; Dong-Cedar, Daisy; Kluger, Benzi M

    2016-08-01

    Background: Acupuncture use is increasing worldwide for many conditions, including movement disorders. Clinical research in acupuncture has also increased to test anecdotal reports of clinical benefits empirically and investigate potential mechanisms. Method: This article describes considerations for designing a double-blinded, randomized, placebo-controlled clinical trial of acupuncture for fatigue in Parkinson's disease (PD) and describes the current authors' experience in the implementation and early conduct of this trial. Relevant literature is also reviewed to provide guidance for other researchers seeking to perform clinical research relevant to PD and related disorders. Results: Trial design should be driven by a well-defined research question and sufficient detail to meet Standards for Reporting Interventions in Clinical Trials of Acupuncture criteria when a trial is complete. Important items for review include: randomization and blinding; recruitment and participant selection; sham methodology choice; staff training; and practical implementation of study procedures. Sample forms used for the current authors' trial are shared. Conclusions: High-quality clinical trials of acupuncture can provide valuable information for clinicians, patients, and policymakers. Acupuncture trials differ in critical ways from pharmaceutical trials and might require additional considerations regarding design and implementation. Adequate preparation for the unique challenges of acupuncture studies can improve trial implementation, design, efficiency, and impact.

  3. Fatigue design of welded joints using the finite element method and the 2007 ASME Div. 2 Master curve

    Directory of Open Access Journals (Sweden)

    G. Nicoletto

    2009-07-01

    Full Text Available Fatigue design of welded structures is primarily based on a nominal stress; hot spot stress methods or local approaches each having several limitations when coupled with finite element modeling. An alternative recent structural stress definition is discussed and implemented in a post-processor. It provides an effective means for the direct coupling of finite element results to the fatigue assessment of welded joints in complex structures. The applications presented in this work confirm the main features of the method: mesh-insensitivity, accurate crack location and life to failure predictions.

  4. Integrating Safety, Operations, Security, and Safeguards (ISOSS) into the design of small modular reactors : a handbook.

    Energy Technology Data Exchange (ETDEWEB)

    Middleton, Bobby D.; Mendez, Carmen Margarita

    2013-10-01

    The existing regulatory environment for nuclear reactors impacts both the facility design and the cost of operations once the facility is built. Delaying the consideration of regulatory requirements until late in the facility design - or worse, until after construction has begun - can result in costly retrofitting as well as increased operational costs to fulfill safety, security, safeguards, and emergency readiness requirements. Considering the scale and scope, as well as the latest design trends in the next generation of nuclear facilities, there is an opportunity to evaluate the regulatory requirements and optimize the design process for Small Modular Reactors (SMRs), as compared to current Light Water Reactors (LWRs). To this end, Sandia has embarked on an initiative to evaluate the interactions of regulations and operations as an approach to optimizing the design of SMR facilities, supporting operational efficiencies, as well as regulatory requirements. The early stages of this initiative consider two focus areas. The first focus area, reported by LaChance, et al. (2007), identifies the regulatory requirements established for the current fleet of LWR facilities regarding Safety, Security, Operations, Safeguards, and Emergency Planning, and evaluates the technical bases for these requirements. The second focus area, developed in this report, documents the foundations for an innovative approach that supports a design framework for SMR facilities that incorporates the regulatory environment, as well as the continued operation of the facility, into the early design stages, eliminating the need for costly retrofitting and additional operating personnel to fulfill regulatory requirements. The work considers a technique known as Integrated Safety, Operations, Security and Safeguards (ISOSS) (Darby, et al., 2007). In coordination with the best practices of industrial operations, the goal of this effort is to develop a design framework that outlines how ISOSS

  5. Nanomaterials handbook

    CERN Document Server

    Gogotsi, Yury

    2006-01-01

    Even before it was identified as a science and given a name,  nanotechnology was the province of the most innovative inventors. In medieval times, craftsmen, ingeniously employing nanometer-sized gold particles, created the enchanting red hues found in the gold ruby glass of cathedral windows. Today, nanomaterials are being just as creatively used to improve old products, as well as usher in new ones. From tires to CRTs to sunscreens, nanomaterials are becoming a part of every industry. The Nanomaterials Handbook provides a comprehensive overview of the current state of nanomaterials. Employ

  6. Geothermal Handbook

    Energy Technology Data Exchange (ETDEWEB)

    Leffel, C.S., Jr.; Eisenberg, R.A.

    1977-06-01

    This handbook is intended to assist the physicist, chemist, engineer, and geologist engaged in discovering and developing geothermal energy resources. This first section contains a glossary of the approximately 500 most frequently occurring geological, physical, and engineering terms, chosen from the geothermal literature. Sections 2 through 8 are fact sheets that discuss such subjects as geothermal gradients, rock classification, and geological time scales. Section 9 contains conversion tables for the physical quantities of interest for energy research in general and for geothermal research in particular.

  7. Materials data handbook, Inconel alloy 718

    Science.gov (United States)

    Sessler, J.; Weiss, V.

    1967-01-01

    Materials data handbook on Inconel alloy 718 includes data on the properties of the alloy at cryogenic, ambient, and elevated temperatures and other pertinent engineering information required for the design and fabrication of components and equipment utilizing this alloy.

  8. Handbook of digital signal processing engineering applications

    CERN Document Server

    1987-01-01

    FROM THE PREFACE: Many new useful ideas are presented in this handbook, including new finite impulse response (FIR) filter design techniques, half-band and multiplierless FIR filters, interpolated FIR (IFIR) structures, and error spectrum shaping.

  9. Handbook on the Experience Economy

    DEFF Research Database (Denmark)

    This illuminating Handbook presents the state-of-the-art in the scientific field of experience economy studies. It offers a rich and varied collection of contributions that discuss different issues of crucial importance for our understanding of the experience economy. Each chapter reflects diverse...... scientific viewpoints from disciplines including management, mainstream economics and sociology to provide a comprehensive overview. The Handbook is divided into three subsections to explore progression in the scientific field of experience economy studies. The first section focuses on fundamental debates...... surrounding the nature and importance of the experience economy. The second section presents more specific topics including innovation, networks and the design of experiences. Finally, the last section explores issues such as cultural events, cuisine, theatre and video games. Moreover, the Handbook gives...

  10. Engineering Design Handbook: Development Guide for Reliability. Part Three. Reliability Prediction

    Science.gov (United States)

    1976-01-01

    to t is pa(t)=l-qa(t) (10-6) This is the reliability of being closed, defined for this interval. 2 The probability that a contact viH be open...a computer. Thus, most of this chapter is written with computers in mind. Comput- er- aided design techniques offer the engineer relief firm

  11. Early Childhood Educator's Nutrition Handbook.

    Science.gov (United States)

    Olson, Christine; And Others

    This nutrition handbook is designed to provide enough information on nutrition and food habits to enable early childhood educators to add a nutrition dimension to children's learning activities. Topics covered are the role of nutrition in growth during the preschool years; nutrients and their functions; selecting a healthy diet; common nutritional…

  12. Handbook for Public Playground Safety.

    Science.gov (United States)

    Consumer Product Safety Commission, Washington, DC.

    Guidelines for playground equipment safety are presented in this handbook. It first provides an overview of common playground injuries and definitions. The layout and design of playgrounds, such as choosing a site, locating equipment, and separating equipment by age level, is addressed next. The remaining sections describe the installation and…

  13. Handbook for Resource Development Internships.

    Science.gov (United States)

    Southern Regional Education Board, Atlanta, GA.

    The Resource Development Project of the Southern Regional Education Board, in conjunction with federal, state and local agencies and southern colleges and universities has organized a service-learning internship program for college students. This handbook is designed as a guide for student interns and project committee members as they work…

  14. Fatigue design of a mechanically biocompatible lattice for a proof-of-concept femoral stem.

    Science.gov (United States)

    Arabnejad Khanoki, Sajad; Pasini, Damiano

    2013-06-01

    A methodology is proposed to design a spatially periodic microarchitectured material for a two-dimensional femoral implant under walking gait conditions. The material is composed of a graded lattice with controlled property distribution that minimizes concurrently bone resorption and interface failure. The periodic microstructure of the material is designed for fatigue fracture caused by cyclic loadings on the hip joint as a result of walking. The bulk material of the lattice is Ti6AL4V and its microstructure is assumed free of defects. The Soderberg diagram is used for the fatigue design under multiaxial loadings. Two cell topologies, square and Kagome, are chosen to obtain optimized property gradients for a two-dimensional implant. Asymptotic homogenization (AH) theory is used to address the multiscale mechanics of the implant as well as to capture the stress and strain distribution at both the macro and the microscale. The microstress distribution found with AH is also compared with that obtained from a detailed finite element analysis. For the maximum value of the von Mises stress, we observe a deviation of 18.6% in unit cells close to the implant boundary, where the AH assumption of spatial periodicity of the fluctuating fields ceases to hold. In the second part of the paper, the metrics of bone resorption and interface shear stress are used to benchmark the graded cellular implant with existing prostheses made of fully dense titanium implant. The results show that the amount of initial postoperative bone loss for square and Kagome lattice implants decreases, respectively, by 53.8% and 58%. In addition, the maximum shear interface failure at the distal end is significantly reduced by about 79%. A set of proof-of-concepts of planar implants have been fabricated via Electron Beam Melting (EBM) to demonstrate the manufacturability of Ti6AL4V into graded lattices with alternative cell size. Optical microscopy has been used to measure the morphological parameters

  15. Gen IV Materials Handbook Implementation Plan

    Energy Technology Data Exchange (ETDEWEB)

    Rittenhouse, P.; Ren, W.

    2005-03-29

    A Gen IV Materials Handbook is being developed to provide an authoritative single source of highly qualified structural materials information and materials properties data for use in design and analyses of all Generation IV Reactor Systems. The Handbook will be responsive to the needs expressed by all of the principal government, national laboratory, and private company stakeholders of Gen IV Reactor Systems. The Gen IV Materials Handbook Implementation Plan provided here addresses the purpose, rationale, attributes, and benefits of the Handbook and will detail its content, format, quality assurance, applicability, and access. Structural materials, both metallic and ceramic, for all Gen IV reactor types currently supported by the Department of Energy (DOE) will be included in the Gen IV Materials Handbook. However, initial emphasis will be on materials for the Very High Temperature Reactor (VHTR). Descriptive information (e.g., chemical composition and applicable technical specifications and codes) will be provided for each material along with an extensive presentation of mechanical and physical property data including consideration of temperature, irradiation, environment, etc. effects on properties. Access to the Gen IV Materials Handbook will be internet-based with appropriate levels of control. Information and data in the Handbook will be configured to allow search by material classes, specific materials, specific information or property class, specific property, data parameters, and individual data points identified with materials parameters, test conditions, and data source. Details on all of these as well as proposed applicability and consideration of data quality classes are provided in the Implementation Plan. Website development for the Handbook is divided into six phases including (1) detailed product analysis and specification, (2) simulation and design, (3) implementation and testing, (4) product release, (5) project/product evaluation, and (6) product

  16. Validation of a Prototype Handbook of Design Guidelines for User Transactions with Battlefield Automated Systems

    Science.gov (United States)

    1984-01-01

    modiles and processes and discusses globa issues in the design of the soldier/machine interface. Part 3, Modulles and Processes,, addresses each module or...dl Perphra ~ . ~status Z - - .f 1 4 a . - - a.o Apparently, the VIDS-DMS will not provide any capability for performing a " warm start." That is, in the...Explore the necessity for a " warm start" capability. If the capability is justified, then a power shut down procedure will be required that gives the

  17. Handbook of systems toxicology

    National Research Council Canada - National Science Library

    Casciano, Daniel A; Sahu, Saura C

    2011-01-01

    "In the first handbook to comprehensively cover the emerging area of systems toxicology, the Handbook of Systems Toxicology provides an authoritative compilation of up-to-date developments presented...

  18. Handbook of visual communications

    CERN Document Server

    Hang, Hseuh-Ming

    1995-01-01

    Handbook of Visual Communications explores the latest developments in the field, such as model-based image coding, and provides readers with insight into possible future developments.Key Features* Displays comprehensive coverage from fundamental theory to international standards and VLSI design* Includes 518 pages of contributions from well-known experts* [please keep this feature current with the page count]* Presents state-of-the-art knowledge--the most up-to-date and accurate information on various topics in the field* Provides an extensive overview of international standards for industrial

  19. The SQUID Handbook

    CERN Document Server

    Braginski, Alex I

    2006-01-01

    This two-volume handbook offers a comprehensive and well coordinated presentation of SQUIDs (Superconducting Quantum Interference Devices), including device fundamentals, design, technology, system construction and multiple applications. It is intended to bridge the gap between fundamentals and applications, and will be a valuable textbook reference for graduate students and for professionals engaged in SQUID research and engineering. It will also be of use to specialists in multiple fields of practical SQUID applications, from human brain research and heart diagnostics to airplane and nuclear

  20. Handbook of web surveys

    CERN Document Server

    Bethlehem, Jelke

    2011-01-01

    BEST PRACTICES TO CREATE AND IMPLEMENTHIGHLY EFFECTIVE WEB SURVEYS Exclusively combining design and sampling issues, Handbook of Web Surveys presents a theoretical yet practical approach to creating and conducting web surveys. From the history of web surveys to various modes of data collection to tips for detecting error, this book thoroughly introduces readers to the this cutting-edge technique and offers tips for creating successful web surveys. The authors provide a history of web surveys and go on to explore the advantages and disadvantages of this mode of dat

  1. Embedded systems handbook

    CERN Document Server

    Zurawski, Richard

    2005-01-01

    Embedded systems are nearly ubiquitous, and books on individual topics or components of embedded systems are equally abundant. Unfortunately, for those designers who thirst for knowledge of the big picture of embedded systems there is not a drop to drink. Until now. The Embedded Systems Handbook is an oasis of information, offering a mix of basic and advanced topics, new solutions and technologies arising from the most recent research efforts, and emerging trends to help you stay current in this ever-changing field.With preeminent contributors from leading industrial and academic institutions

  2. Induction machine handbook

    CERN Document Server

    Boldea, Ion

    2002-01-01

    Often called the workhorse of industry, the advent of power electronics and advances in digital control are transforming the induction motor into the racehorse of industrial motion control. Now, the classic texts on induction machines are nearly three decades old, while more recent books on electric motors lack the necessary depth and detail on induction machines.The Induction Machine Handbook fills industry's long-standing need for a comprehensive treatise embracing the many intricate facets of induction machine analysis and design. Moving gradually from simple to complex and from standard to

  3. Handbook of compliant mechanisms

    CERN Document Server

    Howell, Larry L; Olsen, Brian M

    2013-01-01

    A fully illustrated reference book giving an easy-to-understand introduction to compliant mechanisms A broad compilation of compliant mechanisms to give inspiration and guidance to those interested in using compliant mechanisms in their designs, the Handbook of Compliant Mechanisms includes graphics and descriptions of many compliant mechanisms. It comprises an extensive categorization of devices that can be used to help readers identify compliant mechanisms related to their application. It also provides chapters on the basic background in compliant mechanisms, the categories o

  4. Handbook of algebra

    CERN Document Server

    Hazewinkel, M

    2008-01-01

    Algebra, as we know it today, consists of many different ideas, concepts and results. A reasonable estimate of the number of these different items would be somewhere between 50,000 and 200,000. Many of these have been named and many more could (and perhaps should) have a name or a convenient designation. Even the nonspecialist is likely to encounter most of these, either somewhere in the literature, disguised as a definition or a theorem or to hear about them and feel the need for more information. If this happens, one should be able to find enough information in this Handbook to judge if it i

  5. Electric motor handbook

    CERN Document Server

    Chalmers, B J

    2013-01-01

    Electric Motor Handbook aims to give practical knowledge in a wide range of capacities such as plant design, equipment specification, commissioning, operation and maintenance. The book covers topics such as the modeling of steady-state motor performance; polyphase induction, synchronous, and a.c. commutator motors; ambient conditions, enclosures, cooling and loss dissipation; and electrical supply systems and motor drives. Also covered are topics such as variable-speed drives and motor control; materials and motor components; insulation types, systems, and techniques; and the installation, sit

  6. Variation of Extreme and Fatigue Design Loads on the Main Bearing of a Front Mounted Direct Drive System

    Science.gov (United States)

    Abrahamsen, Asger Bech; Natarajan, Anand

    2016-09-01

    The drivetrain of a 10 MW wind turbine has been designed as a direct drive transmission with a superconducting generator mounted in front of the hub and connected to the main frame through a King-pin stiff assembly by DNV-GL. The aeroelastic design loads of such an arrangement are evaluated based on the thrust and bending moments at the main bearing, both for ultimate design and in fatigue. It is found that the initial superconductor generator weight of 363 tons must be reduced by 25% in order not to result in higher extreme loads on main and yaw bearing than the reference10 MW geared reference drive train. A weight reduction of 50% is needed in order to maintain main bearing fatigue damage equivalent to the reference drive train. Thus a target mass of front mounted superconducting direct drive generators is found to be between 183-272 tons.

  7. Mechanical engineer's handbook

    CERN Document Server

    Marghitu, Dan B

    2001-01-01

    The Mechanical Engineer's Handbook was developed and written specifically to fill a need for mechanical engineers and mechanical engineering students throughout the world. With over 1000 pages, 550 illustrations, and 26 tables the Mechanical Engineer's Handbook is very comprehensive, yet affordable, compact, and durable. The Handbook covers all major areas of mechanical engineering with succinct coverage of the definitions, formulas, examples, theory, proofs, and explanations of all principle subject areas. The Handbook is an essential, practical companion for all mechanic

  8. Semiconductors data handbook

    CERN Document Server

    Madelung, Otfried

    2004-01-01

    This volume Semiconductors: Data Handbook contains frequently used data from the corresponding larger Landolt-Börnstein handbooks in a low price book for the individual scientist working in the laboratory. The Handbook contain important information about a large number of semiconductors

  9. Static and dynamic fatigue behavior of topology designed and conventional 3D printed bioresorbable PCL cervical interbody fusion devices.

    Science.gov (United States)

    Knutsen, Ashleen R; Borkowski, Sean L; Ebramzadeh, Edward; Flanagan, Colleen L; Hollister, Scott J; Sangiorgio, Sophia N

    2015-09-01

    Recently, as an alternative to metal spinal fusion cages, 3D printed bioresorbable materials have been explored; however, the static and fatigue properties of these novel cages are not well known. Unfortunately, current ASTM testing standards used to determine these properties were designed prior to the advent of bioresorbable materials for cages. Therefore, the applicability of these standards for bioresorbable materials is unknown. In this study, an image-based topology and a conventional 3D printed bioresorbable poly(ε)-caprolactone (PCL) cervical cage design were tested in compression, compression-shear, and torsion, to establish their static and fatigue properties. Difficulties were in fact identified in establishing failure criteria and in particular determining compressive failure load. Given these limitations, under static loads, both designs withstood loads of over 650 N in compression, 395 N in compression-shear, and 0.25 Nm in torsion, prior to yielding. Under dynamic testing, both designs withstood 5 million (5M) cycles of compression at 125% of their respective yield forces. Geometry significantly affected both the static and fatigue properties of the cages. The measured compressive yield loads fall within the reported physiological ranges; consequently, these PCL bioresorbable cages would likely require supplemental fixation. Most importantly, supplemental testing methods may be necessary beyond the current ASTM standards, to provide more accurate and reliable results, ultimately improving preclinical evaluation of these devices. Copyright © 2015 Elsevier Ltd. All rights reserved.

  10. A Handbook of Essential Mathematical Formulae

    CERN Document Server

    Davies, Alan

    2005-01-01

    Intended for students of mathematics as well as of engineering, physical science, economics, business studies, and computer science, this handbook contains vital information and formulas for algebra, geometry, calculus, numerical methods, and statistics. Comprehensive tables of standard derivatives and integrals, together with the tables of Laplace, Fourier, and Z transforms are included. A spiral binding that allows the handbook to lay flat for easy reference enhances the user-friendly design.

  11. Handbook of Best Practices for Geothermal Drilling

    Energy Technology Data Exchange (ETDEWEB)

    Finger, John Travis [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Blankenship, Douglas A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2012-02-01

    This Handbook is a description of the complex process that comprises drilling a geothermal well. The focus of the detailed Chapters covering various aspects of the process (casing design, cementing, logging and instrumentation, etc) is on techniques and hardware that have proven successful in geothermal reservoirs around the world. The Handbook will eventually be linked to the GIA web site, with the hope and expectation that it can be continually updated as new methods are demonstrated or proven.

  12. Variation of Extreme and Fatigue Design Loads on the Main Bearing of a Front Mounted Direct Drive System

    DEFF Research Database (Denmark)

    Abrahamsen, Asger Bech; Natarajan, Anand

    2016-01-01

    The drivetrain of a 10 MW wind turbine has been designed as a direct drive transmission with a superconducting generator mounted in front of the hub and connected to the main frame through a King-pin stiff assembly by DNV-GL. The aeroelastic design loads of such an arrangement are evaluated based...... on the thrust and bending moments at the main bearing, both for ultimate design and in fatigue. It is found that the initial superconductor generator weight of 363 tons must be reduced by 25% in order not to result in higher extreme loads on main and yaw bearing than the reference10 MW geared reference drive...

  13. Reduction of fatigue loads on jacket substructure through blade design optimization for multimegawatt wind turbines at 50 m water depths

    DEFF Research Database (Denmark)

    NJOMO WANDJI, Wilfried; Pavese, Christian; Natarajan, Anand;

    2016-01-01

    This paper addresses the reduction of the fore-aft damage equivalent moment at the tower base for multi-megawatt offshore wind turbines mounted on jacket type substructures at 50 m water depths. The study investigates blade design optimization of a reference 10 MW wind turbine under standard wind...... conditions of onshore sites. The blade geometry and structure is optimized to yield a design that minimizes tower base fatigue loads without significant loss of power production compared to that of the reference setup. The resulting blade design is then mounted on a turbine supported by a jacket and placed...

  14. Handbook on modelling for discrete optimization

    CERN Document Server

    Pitsoulis, Leonidas; Williams, H

    2006-01-01

    The primary objective underlying the Handbook on Modelling for Discrete Optimization is to demonstrate and detail the pervasive nature of Discrete Optimization. While its applications cut across an incredibly wide range of activities, many of the applications are only known to specialists. It is the aim of this handbook to correct this. It has long been recognized that "modelling" is a critically important mathematical activity in designing algorithms for solving these discrete optimization problems. Nevertheless solving the resultant models is also often far from straightforward. In recent years it has become possible to solve many large-scale discrete optimization problems. However, some problems remain a challenge, even though advances in mathematical methods, hardware, and software technology have pushed the frontiers forward. This handbook couples the difficult, critical-thinking aspects of mathematical modeling with the hot area of discrete optimization. It will be done in an academic handbook treatment...

  15. Cheap heat pump heating system for low-energy-consumption housing -- Design handbook; Kostenguenstige Waermepumpenheizung fuer Niedrigenergiehaeuser: Technisches Handbuch: Grundlagen, Planungsvorgehen und Beispiele

    Energy Technology Data Exchange (ETDEWEB)

    Afjei, T. [Fachhochschule beider Basel, Muttenz (Switzerland); Buehring, A. [Fraunhofer Institute for Solar Energy Systems, Freiburg (Germany); Duerig, M.; Keller, P.; Zweifel, G. [Fachhochschule Zentralschweiz, School of Engineering and Architecture, Lucerne (Switzerland); Huber, A.; Widmer, P. [Huber Energietechnik, Zuerich (Switzerland); Shafai, E. [Swiss Federal Institute of Technology (ETH), Institut fuer Mess- und Regeltechnik, Zuerich (Switzerland)

    2000-07-01

    This final report for the Swiss Federal Office of Energy (SFOE) presents a technical handbook on the principles and planning processes involved in designing and installing heating systems for low-energy and so-called passive houses with air-renewal systems and provides examples taken from practice. The manual is intended to provide guidance to architects, planners and manufacturers. In the first part of the three-part manual, the basics of energy balances, ecological assessment and modern control techniques are dealt with, the second part covers integral planning, feasibility and manufacturing techniques and the third part gives examples of three houses built to so-called 'Minergie' low-energy and 'passive house' standards. The factors to be taken into account when planning low-energy and passive houses heated with heat pumps are discussed and calculation tools aiding the dimensioning and simulation of the systems are introduced.

  16. Decommissioning handbook

    Energy Technology Data Exchange (ETDEWEB)

    Manion, W.J.; LaGuardia, T.S.

    1980-11-01

    This document is a compilation of information pertinent to the decommissioning of surplus nuclear facilities. This handbook is intended to describe all stages of the decommissioning process including selection of the end product, estimation of the radioactive inventory, estimation of occupational exposures, description of the state-of-the-art in re decontamination, remote csposition of wastes, and estimation of program costs. Presentation of state-of-the-art technology and data related to decommissioning will aid in consistent and efficient program planning and performance. Particular attention is focused on available technology applicable to those decommissioning activities that have not been accomplished before, such as remote segmenting and handling of highly activated 1100 MW(e) light water reactor vessel internals and thick-walled reactor vessels. A summary of available information associated with the planning and estimating of a decommissioning program is also presented. Summarized in particular are the methodologies associated with the calculation and measurement of activated material inventory, distribution, and surface dose level, system contamination inventory and distribution, and work area dose levels. Cost estimating techniques are also presented and the manner in which to account for variations in labor costs as impacting labor-intensive work activities is explained.

  17. Handbook of ecotoxicology

    Science.gov (United States)

    Hoffman, David J.; Rattner, Barnett A.; Burton, G. Allen; Cairns, John

    1995-01-01

    The Handbook of Ecotoxicology offers 34 chapters with contributions from over 50 selected international experts. The book is divided into four major sections: I. Quantifying and Measuring Ecotoxicological Effects, II. Contaminant Sources and Effects, III. Case Histories and Ecosystem Surveys, and IV. Methods for Making Estimates and Predictability in Ecotoxicology. Concepts and methodology are presented for many types of aquatic and terrestrial ecotoxicity test protocols for both controlled and field assessments. Chapters are offered on such diverse topics as sediment and soil ecotoxicity, landscape indicators, biomonitoring, and use of current bioindicators. The roles of deforestation and global warming, pathogens and disease in ecotoxicology, abiotic factors, urban runoff, predictive ecotoxicology, population modeling, and restoration ecology are discussed. This book was designed to serve as a reference book for students entering the fields of ecotoxicology, aquatic toxicology, terrestrial wildlife toxicology, and other environmental sciences. Many portions of this handbook will serve as a convenient reference text for established investigators, resource managers, and those involved in risk assessment and risk management within regulatory agencies and the private sector.

  18. Handbook of mass measurement

    CERN Document Server

    Jones, Frank E

    2002-01-01

    "How much does it weigh?" seems a simple question. To scientists and engineers, however, the answer is far from simple, and determining the answer demands consideration of an almost overwhelming number of factors.With an intriguing blend of history, fundamentals, and technical details, the Handbook of Mass Measurement sets forth the details of achieving the highest precision in mass measurements. It covers the whole field, from the development, calibration, and maintenance of mass standards to detailed accounts of weighing designs, balances, and uncertainty. It addresses the entire measurement process and provides in-depth examinations of the various factors that introduce error.Much of the material is the authors'' own work and some of it is published here for the first time. Jones and Schoonover are both highly regarded veterans of the U.S. National Institute of Standards and Technology. With this handbook, they have provided a service and resource vital to anyone involved not only in the determination of m...

  19. Overview of the 2014 Edition of the International Handbook of Evaluated Reactor Physics Benchmark Experiments (IRPhEP Handbook)

    Energy Technology Data Exchange (ETDEWEB)

    John D. Bess; J. Blair Briggs; Jim Gulliford; Ian Hill

    2014-10-01

    The International Reactor Physics Experiment Evaluation Project (IRPhEP) is a widely recognized world class program. The work of the IRPhEP is documented in the International Handbook of Evaluated Reactor Physics Benchmark Experiments (IRPhEP Handbook). Integral data from the IRPhEP Handbook is used by reactor safety and design, nuclear data, criticality safety, and analytical methods development specialists, worldwide, to perform necessary validations of their calculational techniques. The IRPhEP Handbook is among the most frequently quoted reference in the nuclear industry and is expected to be a valuable resource for future decades.

  20. Design of Fatigue Resistant Heusler-strengthened PdTi-based Shape Memory Alloys for Biomedical Applications

    Science.gov (United States)

    Frankel, Dana J.

    The development of non-surgical transcatheter aortic valve implantation (TAVI) techniques, which utilize collapsible artificial heart valves with shape memory alloy (SMA)-based frames, pushes performance requirements for biomedical SMAs beyond those for well-established vascular stent applications. Fatigue life for these devices must extend into the ultra-high cycle fatigue (UHCF) regime (>600M cycles) with zero probability of failure predicted at applied strain levels. High rates of Ni-hypersensitivity raise biocompatibility concerns, driving the development of low-Ni and Ni-free SMAs. This work focuses on the development of biocompatible, precipitation-strengthened, fatigue-resistant PdTi-based SMAs for biomedical applications. Functional and structural fatigue are both manifestations of cyclic instability resulting in accumulation of slip and eventual structural damage. While functional fatigue is easily experimentally evaluated, structural fatigue is more difficult to measure without the proper equipment. Therefore, in this work a theoretical approach using a model well validated in steels is utilized to investigate structural fatigue behavior in NiTi in the UHCF regime, while low cycle functional fatigue is evaluated in order to monitor the core phenomena of the cyclic instability. Results from fatigue simulations modeling crack nucleation at non-metallic inclusions in commercial NiTi underscore the importance of increasing yield strength for UHCF performance. Controlled precipitation of nanoscale, low-misfit, L21 Heusler aluminides can provide effective strengthening. Phase relations, precipitation kinetics, transformation temperature, transformation strain, cyclic stability, and mechanical properties are characterized in both Ni-free (Pd,Fe)(Ti,Al) and low-Ni high-strength "hybrid" (Pd,Ni)(Ti,Zr,Al) systems. Atom probe tomography is employed to measure phase compositions and particle sizes used to calibrate LSW models for coarsening kinetics and Gibbs

  1. Development and evaluation of an intervention aiming to reduce fatigue in airline pilots: design of a randomised controlled trial.

    Science.gov (United States)

    van Drongelen, Alwin; van der Beek, Allard J; Hlobil, Hynek; Smid, Tjabe; Boot, Cécile R L

    2013-08-26

    A considerable percentage of flight crew reports to be fatigued regularly. This is partly caused by irregular and long working hours and the crossing of time zones. It has been shown that persistent fatigue can lead to health problems, impaired performance during work, and a decreased work-private life balance. It is hypothesized that an intervention consisting of tailored advice regarding exposure to daylight, optimising sleep, physical activity, and nutrition will lead to a reduction of fatigue in airline pilots compared to a control group, which receives a minimal intervention with standard available information. The study population will consist of pilots of a large airline company. All pilots who posses a smartphone or tablet, and who are not on sick leave for more than four weeks at the moment of recruitment, will be eligible for participation.In a two-armed randomised controlled trial, participants will be allocated to an intervention group that will receive the tailored advice to optimise exposure to daylight, sleep, physical activity and nutrition, and a control group that will receive standard available information. The intervention will be applied using a smartphone application and a website, and will be tailored on flight- and participant-specific characteristics. The primary outcome of the study is perceived fatigue. Secondary outcomes are need for recovery, duration and quality of sleep, dietary and physical activity behaviours, work-private life balance, general health, and sickness absence. A process evaluation will be conducted as well. Outcomes will be measured at baseline and at three and six months after baseline. This paper describes the development of an intervention for airline pilots, consisting of tailored advice (on exposure to daylight and sleep-, physical activity, and nutrition) applied into a smartphone application. Further, the paper describes the design of the randomised controlled trial evaluating the effect of the intervention on

  2. Designing a Staff Development Program and Subsequent Handbook for Use at Woburn Nursing Center: A Long-Term Care Facility of Salter Healthcare Services.

    Science.gov (United States)

    McKinnon, Cole; Capone, Martha

    Woburn Nursing Center (WNC), a private nursing home owned and operated by Salter Healthcare Services (SHS), developed an integrated, comprehensive staff development program and handbook. A literature review focused on staff needs, responsible agent, and handbook development. The following activities were undertaken: a review of ERIC documents,…

  3. Handbook for Policymackers

    DEFF Research Database (Denmark)

    Jensen, Ulla Højmark

    2016-01-01

    The purpose of the handbook is to support policy makers / decision makers by enabling them to make informed decisions about funding for second chance education or the adoption of its methods into mainstream education. The Handbook makes policy recommendations and provides guidelines to structure...... a quality assurance system that evidences success factors of second chance education and the value of informal learning. The handbook draws on the results of the literature review, the development of the quality assurance system (SMS system), the Teachers Handbook and the Organisational Handbook....... These are available on the SMART project website at www.edu-smart.eu. The guidelines in this handbook will provide policy makers with the rationale for setting up monitoring and self evaluation systems makes recommendations and provides a structure that facilitates evidencing and justification of success factors...

  4. Design of a Fatigue Detection System for High-Speed Trains Based on Driver Vigilance Using a Wireless Wearable EEG

    Science.gov (United States)

    Zhang, Xiaoliang; Li, Jiali; Liu, Yugang; Zhang, Zutao; Wang, Zhuojun; Luo, Dianyuan; Zhou, Xiang; Zhu, Miankuan; Salman, Waleed; Hu, Guangdi; Wang, Chunbai

    2017-01-01

    The vigilance of the driver is important for railway safety, despite not being included in the safety management system (SMS) for high-speed train safety. In this paper, a novel fatigue detection system for high-speed train safety based on monitoring train driver vigilance using a wireless wearable electroencephalograph (EEG) is presented. This system is designed to detect whether the driver is drowsiness. The proposed system consists of three main parts: (1) a wireless wearable EEG collection; (2) train driver vigilance detection; and (3) early warning device for train driver. In the first part, an 8-channel wireless wearable brain-computer interface (BCI) device acquires the locomotive driver’s brain EEG signal comfortably under high-speed train-driving conditions. The recorded data are transmitted to a personal computer (PC) via Bluetooth. In the second step, a support vector machine (SVM) classification algorithm is implemented to determine the vigilance level using the Fast Fourier transform (FFT) to extract the EEG power spectrum density (PSD). In addition, an early warning device begins to work if fatigue is detected. The simulation and test results demonstrate the feasibility of the proposed fatigue detection system for high-speed train safety. PMID:28257073

  5. Design of a Fatigue Detection System for High-Speed Trains Based on Driver Vigilance Using a Wireless Wearable EEG

    Directory of Open Access Journals (Sweden)

    Xiaoliang Zhang

    2017-03-01

    Full Text Available The vigilance of the driver is important for railway safety, despite not being included in the safety management system (SMS for high-speed train safety. In this paper, a novel fatigue detection system for high-speed train safety based on monitoring train driver vigilance using a wireless wearable electroencephalograph (EEG is presented. This system is designed to detect whether the driver is drowsiness. The proposed system consists of three main parts: (1 a wireless wearable EEG collection; (2 train driver vigilance detection; and (3 early warning device for train driver. In the first part, an 8-channel wireless wearable brain-computer interface (BCI device acquires the locomotive driver’s brain EEG signal comfortably under high-speed train-driving conditions. The recorded data are transmitted to a personal computer (PC via Bluetooth. In the second step, a support vector machine (SVM classification algorithm is implemented to determine the vigilance level using the Fast Fourier transform (FFT to extract the EEG power spectrum density (PSD. In addition, an early warning device begins to work if fatigue is detected. The simulation and test results demonstrate the feasibility of the proposed fatigue detection system for high-speed train safety.

  6. Historical perspectives and recommendations for revision of Agricultural Handbook 296

    Science.gov (United States)

    Major Land Resource Areas (MLRAs) are designed to support the development and coordination of soil and water conservation programs by the NRCS, with the primary document describing MLRA being Agricultural Handbook #296 (1965, 1978, 1981, and 2006). While the most recent edition of the handbook was r...

  7. A Handbook for Teaching Vietnamese-Speaking Students.

    Science.gov (United States)

    California State Dept. of Education, Sacramento. Office of Bilingual Bicultural Education.

    This handbook describes the background, characteristics, and education and language needs of Vietnamese-speaking students in the United States. The handbook was designed to increase understanding of the Vietnamese language and culture among bilingual education specialists and other school personnel, especially in the California public schools.…

  8. Effect of adaptive motion on cyclic fatigue resistance of a nickel titanium instrument designed for retreatment

    Science.gov (United States)

    Yılmaz, Koray; Uslu, Gülşah

    2017-01-01

    Objectives The aim of this study was to evaluate the cyclic fatigue resistance of the ProTaper Universal D1 file (Dentsply Maillefer) under continuous and adaptive motion. Materials and Methods Forty ProTaper Universal D1 files were included in this study. The cyclic fatigue tests were performed using a dynamic cyclic fatigue testing device, which had an artificial stainless steel canal with a 60° angle of curvature and a 5 mm radius of curvature. The files were randomly divided into two groups (Group 1, Rotary motion; Group 2, Adaptive motion). The time to failure of the files were recorded in seconds. The number of cycles to failure (NCF) was calculated for each group. The data were statistically analyzed using Student's t-test. The statistical significant level was set at p < 0.05. Results The cyclic fatigue resistance of the adaptive motion group was significantly higher than the rotary motion group (p < 0.05). Conclusion Within the limitations of the present study, the ‘Adaptive motion’ significantly increased the resistance of the ProTaper Universal D1 file to cyclic facture. PMID:28194362

  9. Design of Linear Control System for Wind Turbine Blade Fatigue Testing

    DEFF Research Database (Denmark)

    Toft, Anders; Roe-Poulsen, Bjarke Nørskov; Christiansen, Rasmus;

    2016-01-01

    This paper proposes a linear method for wind turbine blade fatigue testing at Siemens Wind Power. The setup consists of a blade, an actuator (motor and load mass) that acts on the blade with a sinusoidal moment, and a distribution of strain gauges to measure the blade flexure. Based...

  10. FINODEX Handbook for Entrepreneurs

    DEFF Research Database (Denmark)

    The handbook provides short introductions to necessary knowledge for applicants in the two calls in October 2014 and June 2015 where they can present an idea for product development and apply for up to 10,000 Euro. Furthermore, the handbook is relevant for the next phase, where the selected approx....... 50 projects elaborate detailed technical and market plans. Last, the handbook provides links to further study and information about how to get help in later phases....

  11. Energy Efficiency Governance: Handbook

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-07-01

    This handbook has been written to assist EE practitioners, government officials and stakeholders to establish effective EE governance structures for their country. The handbook provides readers with relevant information in an accessible format that will help develop comprehensive and effective governance mechanisms. For each of the specific topics dealt with (see Figure 1 in the Handbook), the IEA offers guidelines for addressing issues, or directs readers to examples of how such issues have been dealt with by specific countries.

  12. LAWRENCE RADIATION LABORATORY COUNTING HANDBOOK

    Energy Technology Data Exchange (ETDEWEB)

    Group, Nuclear Instrumentation

    1966-10-01

    The Counting Handbook is a compilation of operational techniques and performance specifications on counting equipment in use at the Lawrence Radiation Laboratory, Berkeley. Counting notes have been written from the viewpoint of the user rather than that of the designer or maintenance man. The only maintenance instructions that have been included are those that can easily be performed by the experimenter to assure that the equipment is operating properly.

  13. Measurement, instrumentation, and sensors handbook

    CERN Document Server

    Eren, Halit

    2014-01-01

    The Second Edition of the bestselling Measurement, Instrumentation, and Sensors Handbook brings together all aspects of the design and implementation of measurement, instrumentation, and sensors. Reflecting the current state of the art, it describes the use of instruments and techniques for performing practical measurements in engineering, physics, chemistry, and the life sciences and discusses processing systems, automatic data acquisition, reduction and analysis, operation characteristics, accuracy, errors, calibrations, and the incorporation of standards for control purposes. Organized acco

  14. Handbook of hydraulic fluid technology

    CERN Document Server

    Totten, George E

    2011-01-01

    ""The Handbook of Hydraulic Fluid Technology"" serves as the foremost resource for designing hydraulic systems and for selecting hydraulic fluids used in engineering applications. Featuring new illustrations, data tables, as well as practical examples, this second edition is updated with essential information on the latest hydraulic fluids and testing methods. The detailed text facilitates unparalleled understanding of the total hydraulic system, including important hardware, fluid properties, and hydraulic lubricants. Written by worldwide experts, the book also offers a rigorous overview of h

  15. Geothermal handbook

    Science.gov (United States)

    1976-01-01

    The Bureau of Land Management offered over 400,000 hectares (one million acres) for geothermal exploration and development in 1975, and figure is expected to double this year. The Energy Research and Development Administration hopes for 10-15,000 megawatts of geothermal energy by 1985, which would require, leasing over 16.3 million hectares (37 million acres) of land, at least half of which is federal land. Since there is an 8 to 8-1/2 year time laf between initial exploration and full field development, there would have to be a ten-fold increase in the amount of federal land leased within the next three years. Seventy percent of geothermal potential, 22.3 million hectares (55 million acres), is on federal lands in the west. The implication for the Service are enormous and the problems immediate. Geothermal resource are so widespread they are found to some extent in most biomes and ecosystems in the western United States. In most cases exploitation and production of geothermal resources can be made compatible with fish and wildlife management without damage, if probable impacts are clearly understood and provided for before damage has unwittingly been allowed to occur. Planning for site suitability and concern with specific operating techniques are crucial factors. There will be opportunities for enhancement: during exploration and testing many shallow groundwater bodies may be penetrated which might be developed for wildlife use. Construction equipment and materials needed for enhancement projects will be available in areas heretofore considered remote projects will be available in areas heretofore considered remote by land managers. A comprehensive knowledge of geothermal development is necessary to avoid dangers and seize opportunities. This handbook is intended to serve as a working tool in the field. It anticipated where geothermal resource development will occur in the western United States in the near future. A set of environmental assessment procedures are

  16. Site Development Planning Handbook

    Energy Technology Data Exchange (ETDEWEB)

    None

    1981-01-01

    The Handbook provides facility managers and site planners at DOE organizations responsible for planning site developments and facilities utilization a step-by-step planning checklist to ensure that planners at each site are focusing on Department-wide goals and objectives. It begins with a brief discussion of a site development-by-objectives program design to promote, recognize, and implement opportunities for improvements in site utilization through planning. Additional information is included on: assembling existing data, plans, programs, and procedures; establishing realistic objectives; identifying site problems, opportunities; and development needs; determining priorities among development needs; developing short and long-range plans; choosing the right development solutions and meeting minimum legal site restrictions; presenting the plan; implementing elements of the plan; monitoring and reporting plan status; and modifying development program plans. (MCW)

  17. Condensation of long-term wave climates for the fatigue design of hydrodynamically sensitive offshore wind turbine support structures

    DEFF Research Database (Denmark)

    Passon, Patrik; Branner, Kim

    2016-01-01

    of the marginal wind and wave distribution. This is achieved by condensation of the site-specific wave climate in terms of wave period or wave height lumping, subsequently used as input for a correlation with the corresponding wind climate. The quality of this resulting wind–wave correlation is especially...... important for hydrodynamically sensitive structures since the applied met-ocean parameters have a non-linear influence on calculated fatigue design loads. The present article introduces a new wave lumping method for condensation of the wave climate. The novelty is predominantly based on refined equivalence...

  18. Handbook of digital games and entertainment technologies

    CERN Document Server

    Rauterberg, Matthias; Ciancarini, Paolo

    2017-01-01

    The topics treated in this handbook cover all areas of games and entertainment technologies, such as digital entertainment; technology, design/art, and sociology. The handbook consists of contributions from top class scholars and researchers from the interdisciplinary topic areas.  The aim of this handbook is to serving as a key reference work in the field and provides readers with a holistic picture of this interdisciplinary field covering technical issues, aesthetic/design issues, and sociological issues. At present, there is no reference work in the field that provides such a broad and complete picture of the field. Engineers and researchers who want to learn about this emerging area will be able to find adequate answers regarding technology issues on digital entertainment. Designers and artists can learn how their skills and expertise can contribute to this emerging area. Also researchers working in the field of sociology and psychology will find how their experience and knowledge are connected to other ...

  19. DOE Handbook: Supplementary guidance and design experience for the fusion safety standards DOE-STD-6002-96 and DOE-STD-6003-96

    Energy Technology Data Exchange (ETDEWEB)

    None

    1999-01-01

    Two standards have been developed that pertain to the safety of fusion facilities. These are DOE- STD-6002-96, Safety of Magnetic Fusion Facilities: Requirements, and DOE-STD-6003-96, Safety of Magnetic Fusion Facilities: Guidance. The first of these standards identifies requirements that subscribers to that standard must meet to achieve safety in fusion facilities. The second standard contains guidance to assist in meeting the requirements identified in the first This handbook provides additional documentation on good operations and design practices as well as lessons learned from the experiences of designers and operators of previous fusion facilities and related systems. It is intended to capture the experience gained in the various fields and pass it on to designers of future fusion facilities as a means of enhancing success and safety. The sections of this document are presented according to the physical location of the major systems of a fusion facility, beginning with the vacuum vessel and proceeding to those systems and components outside the vacuum vessel (the "Ex-vessel Systems"). The last section describes administrative procedures that cannot be localized to specific components. It has been tacitly assumed that the general structure of the fusion facilities addressed is that of a tokamak though the same principles would apply to other magnetic confinement options.

  20. Fatigue monitoring in Nuclear Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Ware, A.G.; Shah, V.N. [Idaho National Engineering Laboratory, Idaho Falls, ID (United States)

    1995-04-01

    This paper summarizes fatigue monitoring methods and surveys their application in the nuclear power industry. The paper is based on a review of the technical literature. Two main reasons for fatigue monitoring are more frequent occurrence of some transients than that assumed in the fatigue design analysis and the discovery of stressors that were not included in the fatigue design analysis but may cause significant fatigue damage at some locations. One fatigue monitoring method involves use of plant operating data and procedures to update the fatigue usage. Another method involves monitoring of plant operating parameters using existing, or if needed, supplementary plant instrumentation for online computation of fatigue usage. Use of fatigue monitoring has better defined the operational transients. Most operational transients have been found less severe and fewer in numbers than anticipated in the design fatigue analysis. Use of fatigue monitoring has assisted in quantifying newly discovered stressors and has helped in detecting the presence of thermal stratification of unsuspected locations.

  1. An in vitro investigation into retention strength and fatigue resistance of various designs of tooth/implant supported overdentures.

    Science.gov (United States)

    Fatalla, Abdalbseet A; Song, Ke; Du, Tianfeng; Cao, Yingguang

    2012-02-01

    Previously, the choice of prosthetic implant-retained overdentures has depended on data from previous studies about the retention-fatigue strength of the attachment system selected. Little or no data have been available on the correlation between the attachment system selected and the overdenture support configuration. The purpose of the present study was to evaluate the retention force and fatigue resistance of three attachment systems and four support designs of overdenture prosthesis. Four lower edentulous acrylic models were prepared and eight combinations of attachments groups were investigated in the study. These included: O-Rings with mini-dental implants (MDIs), Dalbo elliptic with Dalbo Rotex and fabricated flexible acrylic attachments with both MDI and Dalbo Rotex. The study was divided into four test groups: groups A and B, controls, and groups C and D, experimental groups. Control group A contained three overdenture supports: two free standing MDIs in the canine region and at the midline, and one simulated tooth root with Dalbo Rotex screwed in. Control group B contained four overdenture support foundations: two free standing MDIs in the right canine region and the first premolar region, and two simulated tooth roots with Dalbo Rotex screwed in at the same MDI position, but on the left side of the model. Experimental group C contained three overdenture support foundations: two free standing MDIs in the canine region and at the midline, and one simulated tooth root with MDI screwed in. Experimental group D contained four overdenture support foundations: two free standing MDIs in the right canine region and the first premolar region, and two simulated tooth roots with MDIs screwed in at the same MDI position, but on the left side of the model. Each group was further divided into two subgroups according to attachment type used. Five samples were prepared for each group. Retention force (N) values were recorded initially (0 cycles) and after 360, 720, 1440

  2. Handbook of Social Capital

    DEFF Research Database (Denmark)

    The Handbook of Social Capital balances the ‘troika' of sociology, political science and economics by offering important contributions to the study of bonding and bridging social capital networks. This inter-disciplinary Handbook intends to serve as a bridge for students and scholars within all...

  3. Research grant handbook

    Science.gov (United States)

    1993-01-01

    This handbook prescribes policies and procedures relating to the award and administration of NASA research grants and cooperative agreements with educational institutions and other nonprofit organizations. The handbook is divided into six subparts: (1) general; (2) definitions; (3) the process; (4) provisions and special conditions; (5) administration; and (6) reports. The appendix includes a listing of exhibits.

  4. Consumer's Resource Handbook.

    Science.gov (United States)

    Office of Consumer Affairs, Washington, DC.

    This handbook is intended to help consumers exercise their rights in the marketplace in three ways. It shows how to communicate more effectively with manufacturers, retailers, and service providers; it is a self-help manual for resolving individual consumer complaints; and it lists helpful sources of assistance. The handbook has two sections. Part…

  5. Customs Modernization Handbook

    OpenAIRE

    De Wulf, Luc; Sokol, José B.

    2005-01-01

    This handbook aims to make a positive contribution to the efforts that many countries are undertaking to modernize their customs administrations. The handbook views a competent and well-organized customs service as one that successfully balances its various responsibilities to ensure a high level of compliance with revenue objectives and regulatory requirements while at the same time inter...

  6. Warehouse Sanitation Workshop Handbook.

    Science.gov (United States)

    Food and Drug Administration (DHHS/PHS), Washington, DC.

    This workshop handbook contains information and reference materials on proper food warehouse sanitation. The materials have been used at Food and Drug Administration (FDA) food warehouse sanitation workshops, and are selected by the FDA for use by food warehouse operators and for training warehouse sanitation employees. The handbook is divided…

  7. Handbook of Analytical Methods for Textile Composites

    Science.gov (United States)

    Cox, Brian N.; Flanagan, Gerry

    1997-01-01

    The purpose of this handbook is to introduce models and computer codes for predicting the properties of textile composites. The handbook includes several models for predicting the stress-strain response all the way to ultimate failure; methods for assessing work of fracture and notch sensitivity; and design rules for avoiding certain critical mechanisms of failure, such as delamination, by proper textile design. The following textiles received some treatment: 2D woven, braided, and knitted/stitched laminates and 3D interlock weaves, and braids.

  8. The Development of a Handbook for the Undecided Major at the State University of New York College at Purchase.

    Science.gov (United States)

    Wilkie, Dana A.

    This practicum report describes design and development of a handbook to help undecided students at the State University of New York College at Purchase explore possible choices of major fields of study. In order to determine what elements should be included in the handbook, a search of the literature on handbook content and development process and…

  9. Fatigue in high speed aluminium craft: Evaluating a design methodology for estimating the fatigue life using large scale tests and full scale trials

    NARCIS (Netherlands)

    Drummen, I.; Schiere, M.; Tuitman, J.T.

    2013-01-01

    Within the VOMAS project, a methodology has been developed to estimate the fatigue life of high-speed aluminium crafts. This paper presents the large scale test and full scale trials which were done to acquire data for evaluating the developed methodology and presents results of this evaluation. Dur

  10. A unifying approach to fatigue design in presence of defects and notches subject to uniaxial loading

    Directory of Open Access Journals (Sweden)

    Atzori Bruno

    2014-06-01

    Full Text Available In the recent past, Atzori and Lazzarin proposed a diagram able to include the geometrical effects on the fatigue limit of defects, short cracks, long cracks and U-shaped notches of whatever severity. The diagram shows that defect sensitivity and notch sensitivity can be considered as two sides of the same medal, thus creating a bridging between Linear Elastic Fracture Mechanics and Notch Mechanics. The fundamental material parameter, dependent on the load ratio, necessary to define the diagram is the El Haddad-Smith-Topper length parameter a0 defined by the plain material fatigue limit and the threshold value of the mode I stress intensity factor for long cracks. It is worth noting that a0 does not contain any geometry-related parameter. The diagram has been validated in the past against a number of experimental results and has been subsequently extended to sharp and blunt V-shaped notches, dependent on their absolute dimensions. After summarising the theory supporting the approach, some application examples relevant to both defect and notch sensitivity will be given

  11. Handbook of energy

    CERN Document Server

    Cleveland, Cutler J

    2013-01-01

    Handbook of Energy, Volume II: Chronologies, Top Ten Lists, and Word Clouds draws together a comprehensive account of the energy field from the prestigious and award-winning authors of the Encyclopedia of Energy (2004), The Dictionary of Energy, Expanded Edition (2009), and the Handbook of Energy, Volume I (2013). Handbook of Energy, Volume II takes the wealth of information about historical aspects of energy spread across many books, journals, websites, disciplines, ideologies, and user communities and synthesizes the information in one central repository. This book meets the needs of a di

  12. Handbook of Qualitative Research Techniques and Analysis in Entrepreneurship

    DEFF Research Database (Denmark)

    2015-01-01

    One of the most challenging tasks in the research design process is choosing the most appropriate data collection and analysis techniques. This Handbook provides a detailed introduction to five qualitative data collection and analysis techniques pertinent to exploring entreprneurial phenomena....

  13. Plug-In Electric Vehicle Handbook for Consumers (Brochure)

    Energy Technology Data Exchange (ETDEWEB)

    2015-02-01

    This handbook is designed to answer a consumer's basic questions, as well as point them to additional information they need, to make the best decision about whether an electric-drive vehicle is right for them.

  14. Plug-In Electric Vehicle Handbook for Consumers

    Energy Technology Data Exchange (ETDEWEB)

    None

    2015-02-09

    This handbook is designed to answer a consumer's basic questions, as well as point them to additional information they need, to make the best decision about whether an electric-drive vehicle is right for them.

  15. Handbook of Qualitative Research Techniques and Analysis in Entrepreneurship

    DEFF Research Database (Denmark)

    One of the most challenging tasks in the research design process is choosing the most appropriate data collection and analysis techniques. This Handbook provides a detailed introduction to five qualitative data collection and analysis techniques pertinent to exploring entreprneurial phenomena....

  16. Coastal Stormwater Management Through Green Infrastructure: A Handbook for Municipalities

    Science.gov (United States)

    The handbook is designed to assist municipalities within the Massachusetts Bay and Cape Cod Bay areas to incorporate green infrastructure into their stormwater management planning. It can also be readily applied to other states.

  17. Coastal Stormwater Management Through Green Infrastructure Handbook for Municipalities

    Science.gov (United States)

    This handbook is designed to assist municipalities within the Massachusetts Bay and Cape Cod Bay areas to incorporate green infrastructure into their stormwater management planning. It can also be readily applied to other states.

  18. Linear electric machines, drives, and MAGLEVs handbook

    CERN Document Server

    Boldea, Ion

    2013-01-01

    Based on author Ion Boldea's 40 years of experience and the latest research, Linear Electric Machines, Drives, and Maglevs Handbook provides a practical and comprehensive resource on the steady improvement in this field. The book presents in-depth reviews of basic concepts and detailed explorations of complex subjects, including classifications and practical topologies, with sample results based on an up-to-date survey of the field. Packed with case studies, this state-of-the-art handbook covers topics such as modeling, steady state, and transients as well as control, design, and testing of li

  19. Handbook of biomass downdraft gasifier engine systems

    Energy Technology Data Exchange (ETDEWEB)

    Reed, T B; Das, A

    1988-03-01

    This handbook has been prepared by the Solar Energy Research Institute under the US Department of Energy /bold Solar Technical Information Program/. It is intended as a guide to the design, testing, operation, and manufacture of small-scale (less than 200 kW (270 hp)) gasifiers. A great deal of the information will be useful for all levels of biomass gasification. The handbook is meant to be a practical guide to gasifier systems, and a minimum amount of space is devoted to questions of more theoretical interest.

  20. Handbook of energy use for building construction

    Energy Technology Data Exchange (ETDEWEB)

    Stein, R.G.; Stein, C.; Buckley, M.; Green, M.

    1980-03-01

    The construction industry accounts for over 11.14% of the total energy consumed in the US annually. This represents the equivalent energy value of 1 1/4 billion barrels of oil. Within the construction industry, new building construction accounts for 5.19% of national annual energy consumption. The remaining 5.95% is distributed among new nonbuilding construction (highways, ralroads, dams, bridges, etc.), building maintenance construction, and nonbuilding maintenance construction. The handbook focuses on new building construction; however, some information for the other parts of the construction industry is also included. The handbook provides building designers with information to determine the energy required for buildings construction and evaluates the energy required for alternative materials, assemblies, and methods. The handbook is also applicable to large-scale planning and policy determination in that it provides the means to estimate the energy required to carry out major building programs.

  1. Bridge engineering handbook construction and maintenance

    CERN Document Server

    Chen, Wai-Fah

    2014-01-01

    Over 140 experts, 14 countries, and 89 chapters are represented in the second edition of the Bridge Engineering Handbook. This extensive collection highlights bridge engineering specimens from around the world, contains detailed information on bridge engineering, and thoroughly explains the concepts and practical applications surrounding the subject.Published in five books: Fundamentals, Superstructure Design, Substructure Design, Seismic Design, and Construction and Maintenance, this new edition provides numerous worked-out examples that give readers step-by-step design procedures, includes c

  2. Reduction of fatigue loads on jacket substructure through blade design optimization for multi-megawatt wind turbines at 50 m water depths

    Science.gov (United States)

    Njomo Wandji, W.; Pavese, C.; Natarajan, A.; Zahle, F.

    2016-09-01

    This paper addresses the reduction of the fore-aft damage equivalent moment at the tower base for multi-megawatt offshore wind turbines mounted on jacket type substructures at 50 m water depths. The study investigates blade design optimization of a reference 10 MW wind turbine under standard wind conditions of onshore sites. The blade geometry and structure is optimized to yield a design that minimizes tower base fatigue loads without significant loss of power production compared to that of the reference setup. The resulting blade design is then mounted on a turbine supported by a jacket and placed under specific offshore site conditions. The new design achieves alleviate fatigue damage equivalent loads also in the jacket members, showing the possibility to prolong its design lifetime or to save material in comparison to the reference jacket. Finally, the results suggest additional benefit on the efficient design of other components such as the constituents of the nacelle.

  3. Risk Characterization Handbook

    Science.gov (United States)

    This Handbook has two parts. The first is the Risk Characterization guidance itself. The second part comprises the Appendices which contain the Risk Characterization Policy, the risk characterization case studies and references.

  4. Water Quality Standards Handbook

    Science.gov (United States)

    The Water Quality Standards Handbook is a compilation of the EPA's water quality standards (WQS) program guidance including recommendations for states, authorized tribes, and territories in reviewing, revising, and implementing WQS.

  5. Utah geothermal institutional handbook

    Energy Technology Data Exchange (ETDEWEB)

    Wagstaff, L.W.; Green, S.

    1982-01-01

    Included in the Handbook are lists of the main permits required and the names of agencies and persons associated with the permits; a summary of pertinent laws, regulations, and permits; and charts outlining typical development and permitting procedures.

  6. The handbook of biomarkers

    CERN Document Server

    Jain, Kewal K

    2010-01-01

    This handbook describes many different types of biomarkers and their discovery. It also presents the background information needed for the evaluation of biomarkers as well as the essential procedures for their validation and use in clinical trials.

  7. 3-D finite element stress analysis for fatigue design and evaluation: a parametric study of MOV(Motor Operated Valve)

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hyeong Keun; Lee, Sang Min; Chang, Yoon Suk; Choi, Jae Boong; Kim, Young Jin [Sungkyunkwan Univ., Suwon (Korea, Republic of); Kim, Yun Jae [Korea Univ., Seoul (Korea, Republic of)

    2004-07-01

    In this paper, a new procedure is proposed to accomplish the primary plus secondary stress(P+Q) at the 'structural element' instead of 'transition element'. For the P+Q evaluation, the calculated stresses by FEA are linearized along a stress classification line to extract the stress category, then the stress intensity is calculated to compare with the 3Sm limit. Also, in this paper, the 'design by analysis' criteria, adopted fundamental concepts and a new approach to calculate Ke factors are explained. The new procedure combined with 3-D FEA has been applied to motor operated valve in order to the over conservatism and the rack of margin. The evaluation results show a good applicability and can be utilized for fatigue life evaluation by using P+Q.

  8. Materials data handbook on Inconel Alloy 718

    Science.gov (United States)

    Muraca, R. F.; Whittick, J. S.

    1973-01-01

    Handbook is divided into twelve chapters. Scope of information presented includes physical- and mechanical-property data at cryogenic, ambient, and elevated temperatures. This is supplemented with useful information in such areas as material procurement, metallurgy of alloy, corrosion, environmental effect, fabrication, and joining techniques. Design data are presented, as available.

  9. Cheerleading. A Handbook for Teacher-Sponsors.

    Science.gov (United States)

    Chicago Board of Education, IL.

    The high school cheerleader has the opportunity to set the stage for sportsmanship, school spirit, and the mood of the athletic program. A carefully planned program is essential to leading cheerleading sections into feelings of good fellowship and interschool rapport. This handbook is designed to assist teacher-sponsors and administrators in the…

  10. Paralegal Training: Focus on Interviewing. Trainer's Handbook.

    Science.gov (United States)

    Collins, Wanda R.; Donnelly, Terrence M.

    The handbook is part of a series on legal services for the elderly which can be provided by senior citizens functioning as paralegals. It is designed to assist trainers in preparing paralegals and covers the following areas: (1) planning a training program--trainees; trainers; setting; materials, equipment, and props; program content; scheduling;…

  11. Plastics. A Handbook for Workplace Educators.

    Science.gov (United States)

    Curry, Donna; Smith, Mikki

    This handbook was designed to help adult literacy education teachers to understand the plastics industry, develop a curriculum, and teach basic skills classes in a plastics company. The book contains four main sections. The first section, on the basics of plastics, contains a brief history of the industry, an elementary description of the…

  12. Area Handbook for Senegal. Second Edition.

    Science.gov (United States)

    Nelson, Harold D.; And Others

    This volume on Senegal is one of a series of handbooks prepared by Foreign Area Studies (FAS) of the American University. It is designed to be useful to military and other personnel who need a convenient compilation of basic facts about the social, economic, political, and military institutions and practices of Senegal. The emphasis is on…

  13. Portfolio Assessment Handbook. 1990-91.

    Science.gov (United States)

    Thomas A. Edison State Coll., Trenton, NJ.

    This handbook gives the adult student information to complete portfolios that are designed to help adult students earn college credits for outside experience. Portfolio assessment is a flexible and efficient way to earn college credit. Nearly any area of learning can be converted into credits as long as it is taught at a regionally accredited…

  14. Public Relations Handbook for Vocational Educators.

    Science.gov (United States)

    South Carolina State Dept. of Education, Columbia. Office of Vocational Education.

    This guide is designed to help local school administrators establish a viable public relations program that will open and maintain an effective communication channel between the school and community. The handbook defines public relations, suggests procedures and helpful hints in establishing good public relations programs, and provides resources…

  15. EMT--A Student Handbook. Revised.

    Science.gov (United States)

    Iowa Univ., Iowa City. Coll. of Education.

    This handbook is designed for use by students preparing for employment in the occupation of emergency medical technician-ambulance (EMT-A) in Iowa. Listed in the introduction are general course prerequisites, the 60 competencies taught in the course, pertinent federal and state requirements, and Iowa certification testing/retesting…

  16. Handbook of Social Capital

    DEFF Research Database (Denmark)

    The Handbook of Social Capital balances the ‘troika' of sociology, political science and economics by offering important contributions to the study of bonding and bridging social capital networks. This inter-disciplinary Handbook intends to serve as a bridge for students and scholars within all...... the social sciences. The contributors explore the different scientific approaches that are all needed if international research is to embrace both the bright and the more shadowy aspects of social capital....

  17. DOE handbook electrical safety

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-01-01

    Electrical Safety Handbook presents the Department of Energy (DOE) safety standards for DOE field offices or facilities involved in the use of electrical energy. It has been prepared to provide a uniform set of electrical safety guidance and information for DOE installations to effect a reduction or elimination of risks associated with the use of electrical energy. The objectives of this handbook are to enhance electrical safety awareness and mitigate electrical hazards to employees, the public, and the environment.

  18. Soviet Space Program Handbook.

    Science.gov (United States)

    1988-04-01

    in advance and some events were even broadcast live. Immediately following the first success- ful launch of their new Energia space launch vehicle in...early 1988. Just as a handbook written a couple of years ago would need updating with Mir, Energia , and the SL-16, this handbook will one day need up...1986. Johnson, Nicholas L. The Soviet Year in Space 1983. Colorado Springs, CO: Teledyne Brown Engineering, 1984. Lawton, A. " Energia - Soviet Super

  19. Knowledge Service Engineering Handbook

    CERN Document Server

    Kantola, Jussi

    2012-01-01

    Covering the emerging field of knowledge service engineering, this groundbreaking handbook outlines how to acquire and utilize knowledge in the 21st century. Drawn on the expertise of the founding faculty member of the world's first university knowledge engineering service department, this book describes what knowledge services engineering means and how it is different from service engineering and service production. Presenting multiple cultural aspects including US, Finnish, and Korean, this handbook provides engineering, systemic, industry, and consumer use viewpoints to knowledge service sy

  20. Thermal/mechanical simulation and laboratory fatigue testing of an alternative yttria tetragonal zirconia polycrystal core-veneer all-ceramic layered crown design.

    Science.gov (United States)

    Bonfante, Estevam A; Rafferty, Brian; Zavanelli, Ricardo A; Silva, Nelson R F A; Rekow, Elizabeth D; Thompson, Van P; Coelho, Paulo G

    2010-04-01

    This study evaluated the stress levels at the core layer and the veneer layer of zirconia crowns (comprising an alternative core design vs. a standard core design) under mechanical/thermal simulation, and subjected simulated models to laboratory mouth-motion fatigue. The dimensions of a mandibular first molar were imported into computer-aided design (CAD) software and a tooth preparation was modeled. A crown was designed using the space between the original tooth and the prepared tooth. The alternative core presented an additional lingual shoulder that lowered the veneer bulk of the cusps. Finite element analyses evaluated the residual maximum principal stresses fields at the core and veneer of both designs under loading and when cooled from 900 degrees C to 25 degrees C. Crowns were fabricated and mouth-motion fatigued, generating master Weibull curves and reliability data. Thermal modeling showed low residual stress fields throughout the bulk of the cusps for both groups. Mechanical simulation depicted a shift in stress levels to the core of the alternative design compared with the standard design. Significantly higher reliability was found for the alternative core. Regardless of the alternative configuration, thermal and mechanical computer simulations showed stress in the alternative core design comparable and higher to that of the standard configuration, respectively. Such a mechanical scenario probably led to the higher reliability of the alternative design under fatigue.

  1. The Maplin electronic circuits handbook

    CERN Document Server

    Tooley, Michael

    2015-01-01

    The Maplin Electronic Circuits Handbook provides pertinent data, formula, explanation, practical guidance, theory and practical guidance in the design, testing, and construction of electronic circuits. This book discusses the developments in electronics technology techniques.Organized into 11 chapters, this book begins with an overview of the common types of passive component. This text then provides the reader with sufficient information to make a correct selection of passive components for use in the circuits. Other chapters consider the various types of the most commonly used semiconductor

  2. Oxford handbook of sound studies

    CERN Document Server

    Pinch, Trevor

    2011-01-01

    Written by the world's leading scholars and researchers in the emerging field of sound studies, The Oxford Handbook of Sound Studies offers new and fully engaging perspectives on the significance of sound in its material and cultural forms. The book considers sounds and music as experienced in such diverse settings as shop floors, laboratories, clinics, design studios, homes, and clubs, across an impressively broad range of historical periods and national and cultural contexts.Science has traditionally been understood as a visual matter, a study which has historically been undertaken with opti

  3. Analysis of stiffness and fatigue resistance of cold recycled asphalt mixtures manufactured with foamed bitumen for their application to airfield pavement design

    Directory of Open Access Journals (Sweden)

    H. I. Lacalle-Jiménez

    2017-07-01

    Full Text Available Cold recycled bound materials (CRBMs provide an economic and environmental advantage for pavements since they decrease energy and raw material consumption. However, design methods for airfield pavements do not include key CRBM properties. In this paper an empirical-mechanistic method is used to study airfield pavement design with CRBM in order to develop design guidance. The aim of the paper is to obtain the inputs related to material properties needed for use in this method. For this purpose, CRBM containing reclaimed asphalt, with fly ash, cement and foamed bitumen as stabilising agents, was characterised. The methodology included indirect tensile stiffness modulus (ITSM and indirect tensile fatigue tests (ITFT in strain control mode. The inputs needed for a pavement design analysis with CRBM were then obtained. The results showed the importance of further study on CRBM fatigue to understand the behaviour of these mixes under cyclic loading.

  4. Stress Analysis and Fatigue Analysis of Front Axle of Heavy-Duty Truck using ANSYS Ncode Design Life for Different Loading Cases

    Directory of Open Access Journals (Sweden)

    Hemant L. Aghav

    2016-06-01

    Full Text Available Front axle of heavy duty truck is the important component of vehicle and needs good design under the various loading conditions of the complete vehicle. Aim of the project is to stress analysis and predict the life of front axle for vertical, and vertical and braking loading case. The fatigue life of front axle is generally estimated by stress life approach and strain life approach method. Front axle beam assembly was modeled in the NX cad software. Meshing and Stress analysis is performed by ANSYS workbench and fatigue analysis is performed by NCODE design life ANSYS tool under different loading cases. Fatigue life of axle obtained by FEA method is more than 2 x 105 cycles, which is considered as safe for vertical loading case. Similarly, Fatigue life of axle obtained is more than 4 x 103 cycles, which is considered as safe for vertical and braking loading case. The max stress region is below spring pad of axle for vertical loading and in the goose neck of axle for vertical and braking loading case

  5. Sections prepared for inclusion in an IAEA technical document handbook on Designing and Implementing a Physical Protection System

    Energy Technology Data Exchange (ETDEWEB)

    Snell, Mark K. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-11-01

    Two major sections were drafted (each with several subsections) for the IAEA dealing with designing and implementing a Physical Protection System (PPS). Areas addressed were Search Systems and the evaluation of PPS effectiveness.

  6. Fatigue Management (La Gestion de la Fatigue)

    Science.gov (United States)

    1991-12-01

    Management Pre’face Etant donne la tenidance de plus en plus marque ~e vets le maintien en service des aironefs au-delak des dates lintites...transport aircraft designed prototype sade its first flight one year about 20 years ago; from the fatigue point later. The results of the flight testing

  7. Life prediction methodology for thermal-mechanical fatigue and elevated temperature creep design

    Science.gov (United States)

    Annigeri, Ravindra

    Nickel-based superalloys are used for hot section components of gas turbine engines. Life prediction techniques are necessary to assess service damage in superalloy components resulting from thermal-mechanical fatigue (TMF) and elevated temperature creep. A new TMF life model based on continuum damage mechanics has been developed and applied to IN 738 LC substrate material with and without coating. The model also characterizes TMF failure in bulk NiCoCrAlY overlay and NiAl aluminide coatings. The inputs to the TMF life model are mechanical strain range, hold time, peak cycle temperatures and maximum stress measured from the stabilized or mid-life hysteresis loops. A viscoplastic model is used to predict the stress-strain hysteresis loops. A flow rule used in the viscoplastic model characterizes the inelastic strain rate as a function of the applied stress and a set of three internal stress variables known as back stress, drag stress and limit stress. Test results show that the viscoplastic model can reasonably predict time-dependent stress-strain response of the coated material and stress relaxation during hold times. In addition to the TMF life prediction methodology, a model has been developed to characterize the uniaxial and multiaxial creep behavior. An effective stress defined as the applied stress minus the back stress is used to characterize the creep recovery and primary creep behavior. The back stress has terms representing strain hardening, dynamic recovery and thermal recovery. Whenever the back stress is greater than the applied stress, the model predicts a negative creep rate observed during multiple stress and multiple temperature cyclic tests. The model also predicted the rupture time and the remaining life that are important for life assessment. The model has been applied to IN 738 LC, Mar-M247, bulk NiCoCrAlY overlay coating and 316 austenitic stainless steel. The proposed model predicts creep response with a reasonable accuracy for wide range of

  8. Handbook of hardware/software codesign

    CERN Document Server

    Teich, Jürgen

    2017-01-01

    This handbook presents fundamental knowledge on the hardware/software (HW/SW) codesign methodology. Contributing expert authors look at key techniques in the design flow as well as selected codesign tools and design environments, building on basic knowledge to consider the latest techniques. The book enables readers to gain real benefits from the HW/SW codesign methodology through explanations and case studies which demonstrate its usefulness. Readers are invited to follow the progress of design techniques through this work, which assists readers in following current research directions and learning about state-of-the-art techniques. Students and researchers will appreciate the wide spectrum of subjects that belong to the design methodology from this handbook. .

  9. Springer Handbook of Acoustics

    CERN Document Server

    Rossing, Thomas D

    2007-01-01

    Acoustics, the science of sound, has developed into a broad interdisciplinary field encompassing the academic disciplines of physics, engineering, psychology, speech, audiology, music, architecture, physiology, neuroscience, and others. The Springer Handbook of Acoustics is an unparalleled modern handbook reflecting this richly interdisciplinary nature edited by one of the acknowledged masters in the field, Thomas Rossing. Researchers and students benefit from the comprehensive contents spanning: animal acoustics including infrasound and ultrasound, environmental noise control, music and human speech and singing, physiological and psychological acoustics, architectural acoustics, physical and engineering acoustics, signal processing, medical acoustics, and ocean acoustics. This handbook reviews the most important areas of acoustics, with emphasis on current research. The authors of the various chapters are all experts in their fields. Each chapter is richly illustrated with figures and tables. The latest rese...

  10. Idaho Geothermal Handbook

    Energy Technology Data Exchange (ETDEWEB)

    Hammer, Gay Davis; Esposito, Louis; Montgomery, Martin

    1979-07-01

    Idaho's energy problems have increased at alarming rates due to their dependency on imports of gas and oil. The large hydroelectric base developed in Idaho has for years kept the electric rates relatively low and supplied them with energy on a consumer demand basis. However, this resource cannot be 4expected to meet their growing demands in the years to come. Energy alternatives, in whatever form, are extremely important to the future welfare of the State of Idaho. This handbook addresses the implications, uses, requirements and regulations governing one of Idaho's most abundant resources, geothermal energy. The intent of the Idaho Geothermal Handbook is to familiarize the lay person with the basis of geothermal energy in Idaho. The potential for geothermal development in the State of Idaho is tremendous. The authors hope this handbook will both increase your knowledge of geothermal energy and speed you on your way to utilizing this renewable resource.

  11. Springer handbook of robotics

    CERN Document Server

    Khatib, Oussama

    2016-01-01

    The second edition of this handbook provides a state-of-the-art cover view on the various aspects in the rapidly developing field of robotics. Reaching for the human frontier, robotics is vigorously engaged in the growing challenges of new emerging domains. Interacting, exploring, and working with humans, the new generation of robots will increasingly touch people and their lives. The credible prospect of practical robots among humans is the result of the scientific endeavour of a half a century of robotic developments that established robotics as a modern scientific discipline. The ongoing vibrant expansion and strong growth of the field during the last decade has fueled this second edition of the Springer Handbook of Robotics. The first edition of the handbook soon became a landmark in robotics publishing and won the American Association of Publishers PROSE Award for Excellence in Physical Sciences & Mathematics as well as the organization’s Award for Engineering & Technology. The second edition o...

  12. Springer handbook of acoustics

    CERN Document Server

    2014-01-01

    Acoustics, the science of sound, has developed into a broad interdisciplinary field encompassing the academic disciplines of physics, engineering, psychology, speech, audiology, music, architecture, physiology, neuroscience, and electronics. The Springer Handbook of Acoustics is also in his 2nd edition an unparalleled modern handbook reflecting this richly interdisciplinary nature edited by one of the acknowledged masters in the field, Thomas Rossing. Researchers and students benefit from the comprehensive contents. This new edition of the Handbook features over 11 revised and expanded chapters, new illustrations, and 2 new chapters covering microphone arrays  and acoustic emission.  Updated chapters contain the latest research and applications in, e.g. sound propagation in the atmosphere, nonlinear acoustics in fluids, building and concert hall acoustics, signal processing, psychoacoustics, computer music, animal bioacousics, sound intensity, modal acoustics as well as new chapters on microphone arrays an...

  13. Liquid metals fire control engineering handbook

    Energy Technology Data Exchange (ETDEWEB)

    Ballif, J.L. (comp.)

    1979-02-01

    This handbook reviews the basic requirements of the use of liquid metals with emphasis on sodium which has the greatest current usage. It delineates the concepts necessary to design facilities both radioactive and nonradioactive for use with liquid metals. It further reviews the state-of-the-art in fire extinguishers and leak detection equipment and comments on their application and sensitivity. It also provides details on some engineering features of value to the designer of liquid metal facilities.

  14. Electric power distribution handbook

    CERN Document Server

    Short, Thomas Allen

    2003-01-01

    Of the ...big three... components of the electricity infrastructure, distribution typically gets the least attention, and no thorough, up-to-date treatment of the subject has been published in years. Filling that void, the Electric Power Distribution Handbook provides comprehensive information on the electrical aspects of power distribution systems. It is an unparalleled source for the background information, hard-to-find tables, graphs, methods, and statistics that power engineers need, and includes tips and solutions for problem solving and improving performance. In short, this handbook giv

  15. Handbook of surveillance technologies

    CERN Document Server

    Petersen, JK

    2012-01-01

    From officially sanctioned, high-tech operations to budget spy cameras and cell phone video, this updated and expanded edition of a bestselling handbook reflects the rapid and significant growth of the surveillance industry. The Handbook of Surveillance Technologies, Third Edition is the only comprehensive work to chronicle the background and current applications of the full-range of surveillance technologies--offering the latest in surveillance and privacy issues.Cutting-Edge--updates its bestselling predecessor with discussions on social media, GPS circuits in cell phones and PDAs, new GIS s

  16. Handbook of biomedical optics

    CERN Document Server

    Boas, David A

    2011-01-01

    Biomedical optics holds tremendous promise to deliver effective, safe, non- or minimally invasive diagnostics and targeted, customizable therapeutics. Handbook of Biomedical Optics provides an in-depth treatment of the field, including coverage of applications for biomedical research, diagnosis, and therapy. It introduces the theory and fundamentals of each subject, ensuring accessibility to a wide multidisciplinary readership. It also offers a view of the state of the art and discusses advantages and disadvantages of various techniques.Organized into six sections, this handbook: Contains intr

  17. Handbook of vacuum physics

    CERN Document Server

    1964-01-01

    Handbook of Vacuum Physics, Volume 3: Technology is a handbook of vacuum physics, with emphasis on the properties of miscellaneous materials such as mica, oils, greases, waxes, and rubber. Accurate modern tables of physical constants, properties of materials, laboratory techniques, and properties of commercial pumps, gauges, and leak detectors are presented. This volume is comprised of 12 chapters and begins with a discussion on pump oils, divided into rotary pump oils and vapor pump oils. The next chapter deals with the properties and applications of greases, including outgassing and vapor pr

  18. Nanoelectronic device applications handbook

    CERN Document Server

    Morris, James E

    2013-01-01

    Nanoelectronic Device Applications Handbook gives a comprehensive snapshot of the state of the art in nanodevices for nanoelectronics applications. Combining breadth and depth, the book includes 68 chapters on topics that range from nano-scaled complementary metal-oxide-semiconductor (CMOS) devices through recent developments in nano capacitors and AlGaAs/GaAs devices. The contributors are world-renowned experts from academia and industry from around the globe. The handbook explores current research into potentially disruptive technologies for a post-CMOS world.These include: Nanoscale advance

  19. The digital media handbook

    CERN Document Server

    Dewdney, Andrew

    2013-01-01

    The new edition of The Digital Media Handbook presents an essential guide to the historical and theoretical development of digital media, emphasising cultural continuity alongside technological change, and highlighting the emergence of new forms of communication in contemporary networked culture.Andrew Dewdney and Peter Ride present detailed critical commentary and descriptive historical accounts, as well as a series of interviews from a range of digital media practitioners, including producers, developers, curators and artists.The Digital Media Handbook highlights key concerns of today's prac

  20. Information security management handbook

    CERN Document Server

    2002-01-01

    The Information Security Management Handbook continues its tradition of consistently communicating the fundamental concepts of security needed to be a true CISSP. In response to new developments, Volume 4 supplements the previous volumes with new information covering topics such as wireless, HIPAA, the latest hacker attacks and defenses, intrusion detection, and provides expanded coverage on security management issues and applications security. Even those that don't plan on sitting for the CISSP exam will find that this handbook is a great information security reference.The changes in the tech

  1. Practical electronics handbook

    CERN Document Server

    Sinclair, Ian R

    1988-01-01

    Practical Electronics Handbook, Second Edition covers information useful in electronics, with focus on mathematical conventions. The handbook discusses the passive (resistors, capacitors, band coding, and inductors) and active discrete (diodes, transistors and negative feedback) components; discrete component circuits; and transferring digital data. Linear I.C.s, which are the single-chip arrangements of amplifier circuits that are intended to be biased and operated in a linear way, and digital I.C.s, which process signals and consist of two significant voltage levels, are also considered. T

  2. Information security management handbook

    CERN Document Server

    Tipton, Harold F

    2003-01-01

    Since 1993, the Information Security Management Handbook has served not only as an everyday reference for information security practitioners but also as an important document for conducting the intense review necessary to prepare for the Certified Information System Security Professional (CISSP) examination. Now completely revised and updated and in its fifth edition, the handbook maps the ten domains of the Information Security Common Body of Knowledge and provides a complete understanding of all the items in it. This is a ...must have... book, both for preparing for the CISSP exam and as a c

  3. Handbook of finite fields

    CERN Document Server

    Mullen, Gary L

    2013-01-01

    Poised to become the leading reference in the field, the Handbook of Finite Fields is exclusively devoted to the theory and applications of finite fields. More than 80 international contributors compile state-of-the-art research in this definitive handbook. Edited by two renowned researchers, the book uses a uniform style and format throughout and each chapter is self contained and peer reviewed. The first part of the book traces the history of finite fields through the eighteenth and nineteenth centuries. The second part presents theoretical properties of finite fields, covering polynomials,

  4. Handbook of probability

    CERN Document Server

    Florescu, Ionut

    2013-01-01

    THE COMPLETE COLLECTION NECESSARY FOR A CONCRETE UNDERSTANDING OF PROBABILITY Written in a clear, accessible, and comprehensive manner, the Handbook of Probability presents the fundamentals of probability with an emphasis on the balance of theory, application, and methodology. Utilizing basic examples throughout, the handbook expertly transitions between concepts and practice to allow readers an inclusive introduction to the field of probability. The book provides a useful format with self-contained chapters, allowing the reader easy and quick reference. Each chapter includes an introductio

  5. Software quality assurance handbook

    Energy Technology Data Exchange (ETDEWEB)

    1990-09-01

    There are two important reasons for Software Quality Assurance (SQA) at Allied-Signal Inc., Kansas City Division (KCD): First, the benefits from SQA make good business sense. Second, the Department of Energy has requested SQA. This handbook is one of the first steps in a plant-wide implementation of Software Quality Assurance at KCD. The handbook has two main purposes. The first is to provide information that you will need to perform software quality assurance activities. The second is to provide a common thread to unify the approach to SQA at KCD. 2 figs.

  6. Fatigue Reliability of Offshore Wind Turbine Systems

    DEFF Research Database (Denmark)

    Marquez-Dominguez, Sergio; Sørensen, John Dalsgaard

    2012-01-01

    Optimization of the design of offshore wind turbine substructures with respect to fatigue loads is an important issue in offshore wind energy. A stochastic model is developed for assessing the fatigue failure reliability. This model can be used for direct probabilistic design and for calibration...... of appropriate partial safety factors / fatigue design factors (FDF) for steel substructures of offshore wind turbines (OWTs). The fatigue life is modeled by the SN approach. Design and limit state equations are established based on the accumulated fatigue damage. The acceptable reliability level for optimal...

  7. Chances in wind energy: a probalistic approach to wind turbine fatigue design

    NARCIS (Netherlands)

    Veldkamp, H.F.

    2006-01-01

    Wind is becoming an ever more important source of renewable energy: installed wind turbine power now stands at 60,000 MW worldwide, providing 0.6% of world electricity demand. Still it is important that the cost of wind energy is brought down further, which means that wind turbines must be designed

  8. Combined bio and solar heating system. Handbook for system design; Kombinerade bio- och solvaermesystem. Handbok foer systemutformning

    Energy Technology Data Exchange (ETDEWEB)

    Persson, Tomas

    2008-11-15

    The purpose of this report is to compile the knowledge available concerning combined pellets and solar system in order to support companies in their systems design. This publication deals with experience gained in research on solar and pellet heating, and gives proposals to system design, various technical solutions, and how systems should be controlled. When solar and pellets are combined, there are many possibilities to interconnect the systems. There are different traditions in different countries, which makes the system solutions vary from country to country. A general conclusion is that conventional Swedish boilers with built-in hot water heater are not appropriate for conventional solar systems. It gives rise to complex solutions and it is difficult to achieve good stratification in the water tank. In a solar system, it is important that the tank can be discharged in such a way that sharp stratification is obtained. This means that the tank bottom must be chilled to the temperature of incoming cold water and that the middle part must be cooled to the same temperature as the radiator return. If solar panels even in winter can work to preheat the cold water of 10 to 20 C, a much better efficiency is obtained on collectors than if the radiator return must be preheated, which at best is at a temperature level of between 30 and 40 C. To this end, the radiator return is placed well up from the bottom of the tank and the tap water is preheated in a loop that starts in the tank bottom. Another important parameter in the tank design is that heat losses are kept low, it is important that the solar heat can produce the hot water even during overcast periods in summer and to keep energy consumption low. In modern houses where the tank is placed in the living area, it is important to avoid high temperatures in the room where the tank is placed. To obtain a good isolation one must ensure that there is an airtight layer across the isolation that also closes tightly against

  9. Multiaxial Creep-Fatigue and Creep-Ratcheting Failures of Grade 91 and Haynes 230 Alloys Toward Addressing Design Issues of Gen IV Nuclear Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Hassan, Tasnim [North Carolina State Univ., Raleigh, NC (United States); Lissenden, Cliff [Penn State Univ., University Park, PA (United States); Carroll, Laura [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-04-01

    The proposed research will develop systematic sets of uniaxial and multiaxial experimental data at a very high temperature (850-950°C) for Alloy 617. The loading histories to be prescribed in the experiments will induce creep-fatigue and creep-ratcheting failure mechanisms. These experimental responses will be scrutinized in order to quantify the influences of temperature and creep on fatigue and ratcheting failures. A unified constitutive model (UCM) will be developed and validated against these experimental responses. The improved UCM will be incorporated into the widely used finite element commercial software packages ANSYS. The modified ANSYS will be validated so that it can be used for evaluating the very high temperature ASME-NH design-by-analysis methodology for Alloy 617 and thereby addressing the ASME-NH design code issues.

  10. Handbook of nuclear engineering: vol 1: nuclear engineering fundamentals; vol 2: reactor design; vol 3: reactor analysis; vol 4: reactors of waste disposal and safeguards

    CERN Document Server

    2013-01-01

    The Handbook of Nuclear Engineering is an authoritative compilation of information regarding methods and data used in all phases of nuclear engineering. Addressing nuclear engineers and scientists at all academic levels, this five volume set provides the latest findings in nuclear data and experimental techniques, reactor physics, kinetics, dynamics and control. Readers will also find a detailed description of data assimilation, model validation and calibration, sensitivity and uncertainty analysis, fuel management and cycles, nuclear reactor types and radiation shielding. A discussion of radioactive waste disposal, safeguards and non-proliferation, and fuel processing with partitioning and transmutation is also included. As nuclear technology becomes an important resource of non-polluting sustainable energy in the future, The Handbook of Nuclear Engineering is an excellent reference for practicing engineers, researchers and professionals.

  11. Biaxial fatigue of metals the present understanding

    CERN Document Server

    Schijve, Jaap

    2016-01-01

    Problems of fatigue under multiaxial fatigue loads have been addressed in a very large number of research publications. The present publication is primarily a survey of biaxial fatigue under constant amplitude loading on metal specimens. It starts with the physical understanding of the fatigue phenomenon under biaxial fatigue loads. Various types of proportional and non-proportional biaxial fatigue loads and biaxial stress distributions in a material are specified. Attention is paid to the fatigue limit, crack nucleation, initial micro crack growth and subsequent macro-crack in different modes of crack growth. The interference between the upper and lower surfaces of a fatigue crack is discussed. Possibilities for predictions of biaxial fatigue properties are analysed with reference to the similarity concept. The significance of the present understanding for structural design problems is considered. The book is completed with a summary of major observations.

  12. Gathering together the essence of conventional and modern design leading the new trend of modern mechanical design——Comments on"mechanical design handbook"5th edition%荟萃常规与现代设计精华引领现代机械设计新潮流一评《机械设计手册》第5版

    Institute of Scientific and Technical Information of China (English)

    张宪民

    2011-01-01

    It describes the "Mechanical Design Handbook"5th edition,which is edited by Bangchun Wen,the academician, and published by Machinery Industry Press.This handbook covers the mechanical design of conventional and the full content of modern design, having the overall structure of the novel and unique and scientific, advanced practical, reliable content.In particular, the 21 species of modern design methods is scientifically classified and incorporated into this handbook by use of systems engineering theory,as this handbook expounds,the comprehensive mechanical product design methods and its applications in large,complex,modern machine has innovativeness.Certainly this handbook will be able to play the role of guidance and demonstration on mechanical design especially innovative mechanics design of modern,and make an important contribution to increasing the up-to-date level of our country's mechanical design.%介绍了闻邦椿院士主编、机械工业出版社出版的大型工具书《机械设计手册》第5版.该手册涵盖机械常规设计又全面涵盖现代设计,具有新颖独特的总体结构和科学、先进、实用、可靠的内容,尤其是运用系统工程理论科学地分类并编入的21种现代设计方法,论述机械产品综合设计方法及在大型、复杂、现代机械的设计应用等具有创新性.该手册将对我国机械设计尤其是现代机械创新设计起指导和示范作用,并将为提升我国机械设计工作的现代化水平做出重要贡献.

  13. Probabilistic Fatigue Damage Program (FATIG)

    Science.gov (United States)

    Michalopoulos, Constantine

    2012-01-01

    FATIG computes fatigue damage/fatigue life using the stress rms (root mean square) value, the total number of cycles, and S-N curve parameters. The damage is computed by the following methods: (a) traditional method using Miner s rule with stress cycles determined from a Rayleigh distribution up to 3*sigma; and (b) classical fatigue damage formula involving the Gamma function, which is derived from the integral version of Miner's rule. The integration is carried out over all stress amplitudes. This software solves the problem of probabilistic fatigue damage using the integral form of the Palmgren-Miner rule. The software computes fatigue life using an approach involving all stress amplitudes, up to N*sigma, as specified by the user. It can be used in the design of structural components subjected to random dynamic loading, or by any stress analyst with minimal training for fatigue life estimates of structural components.

  14. The Asphalt Handbook.

    Science.gov (United States)

    Asphalt Inst., College Park, MD.

    The new and completely revised edition of the Asphalt Handbook, a standard reference work in the field of asphalt technology and construction, summarizes with reference the information contained in other Asphalt Institute technical manuals. Major areas discussed include the following--(1) uses of asphalt, (2) terms relating to asphalt and its…

  15. Rain Gauges Handbook

    Energy Technology Data Exchange (ETDEWEB)

    Bartholomew, M. J. [Brookhaven National Lab. (BNL), Upton, NY (United States)

    2016-01-01

    To improve the quantitative description of precipitation processes in climate models, the Atmospheric Radiation Measurement (ARM) Climate Research Facility deployed rain gauges located near disdrometers (DISD and VDIS data streams). This handbook deals specifically with the rain gauges that make the observations for the RAIN data stream. Other precipitation observations are made by the surface meteorology instrument suite (i.e., MET data stream).

  16. Area Handbook for Burma.

    Science.gov (United States)

    Henderson, John W.; And Others

    This volume, one of a series of handbooks on foreign culture, is intended as a reference tool for military and other personnel requiring an objective, comprehensive, and balanced description of Burma's modern society. An analytical appraisal of social, economic, and political aspects is provided with emphasis on the interaction of these societal…

  17. Toy Demonstrator's "VISIT" Handbook.

    Science.gov (United States)

    Levenstein, Phyllis

    The role of the toy demonstrator in a home-based, mother-involved intervention effort (Verbal Interaction Project) is presented in this handbook for staff members. It is believed that the prerequisites for functioning in the toy demonstrator's role are a sense of responsibility, patience with the children and their mothers, and willingness to be…

  18. Radiation`96. Conference handbook

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    The conference program includes eight invited lectures which cover a range of contemporary topics in radiation science and technology. In addition, thirty-two oral papers were presented, along with forty-five posters. The conference handbook contains one-page precis or extended abstracts of all presentations, and is a substantial compendium of current radiation research in Australia.

  19. APA Educational Psychology Handbook

    Science.gov (United States)

    Harris, Karen R., Ed.; Graham, Steve, Ed.; Urdan, Tim, Ed.

    2011-01-01

    The "APA Educational Psychology Handbook" reflects the broad nature of the field today, with state-of-the-science reviews of the diverse critical theories driving research and practice; in-depth investigation of the range of individual differences and cultural/contextual factors that affect student achievement, motivation, and beliefs;…

  20. Basic Spanish: Student Handbook.

    Science.gov (United States)

    Hartley, Peggy J.; And Others

    This handbook was first planned for use by the teacher and students of two experimental introductory Spanish classes of the University of South Carolina, employing the materials "Espanol a lo vivo" during the 1971-72 and 1972-73 academic years. One group followed a traditional approach to instruction having class four times weekly, while the other…

  1. Animal damage management handbook.

    Science.gov (United States)

    Hugh C. Black

    1994-01-01

    This handbook treats animal damage management (ADM) in the West in relation to forest, range, and recreation resources; predator management is not addressed. It provides a comprehensive reference of safe, effective, and practical methods for managing animal damage on National Forest System lands. Supporting information is included in references after each chapter and...

  2. The Military Instructor's Handbook

    DEFF Research Database (Denmark)

    Sjøstedt, Peter; Grønlund, Thomas

    The Military Instructor's handbook was written for the basic professional training of instructors in the danish defence. The book describes the work of instructors and their areas of responsibility, and it offers guidance and direction on how to plan, conduct and evaluate learning activities...

  3. Child Care Services Handbook.

    Science.gov (United States)

    Duval County School Board, Jacksonville, FL.

    A companion document to the curriculum guide for a secondary level child care services curriculum, this handbook contains a variety of administrative and program resources for the teacher: The vocational curriculum outline for child care services; a calendar of suggested public relations activities; procedures for building child care services…

  4. Handbook on Peace Education.

    Science.gov (United States)

    Wulf, Christoph, Ed.

    The intention of this handbook is to report on the present situation in the international discussion on peace education and to make further development of this field possible in the peace movement. The first of the three sections contains papers which are contributions on preconditions for and the foundations of peace education, along with…

  5. Connecticut Marketing Education Handbook.

    Science.gov (United States)

    West Haven Board of Education, CT.

    This revised marketing education handbook is intended to assist marketing education teachers and administrators in Connecticut in preparing students to enter meaningful careers in marketing, merchandising, and management positions. The 17 units of this reference guide cover the following topics: introduction; mission and scope of marketing…

  6. Handbook on Peace Education

    Science.gov (United States)

    Salomon, Gavriel, Ed.; Cairns, Ed, Ed.

    2009-01-01

    This handbook encompasses a range of disciplines that underlie the field of peace education and provides the rationales for the ways it is actually carried out. The discipline is a composite of contributions from a variety of disciplines ranging from social psychology to philosophy and from communication to political science. That is, peace…

  7. The Population Activist's Handbook.

    Science.gov (United States)

    Population Inst., Washington, DC.

    This handbook is a guide to effective action strategies on dealing with overpopulation. Divided into five sections, the book outlines programs, suggests references, and lists resources that are helpful for thinking and for planning action on population issues. Section one focuses on strategies to change the current population policy choices made…

  8. The Population Activist's Handbook.

    Science.gov (United States)

    Population Inst., Washington, DC.

    This handbook is a guide to effective action strategies on dealing with overpopulation. Divided into five sections, the book outlines programs, suggests references, and lists resources that are helpful for thinking and for planning action on population issues. Section one focuses on strategies to change the current population policy choices made…

  9. European food law handbook

    NARCIS (Netherlands)

    Meulen, van der B.M.J.; Velde, van der M.; Szajkowska, A.; Verbruggen, R.

    2008-01-01

    This handbook analyses and explains the institutional, substantive and procedural elements of EU food law, taking the General Food Law as a focus point. Principles are discussed as well as specific rules addressing food as a product, the processes related to food and communication about food through

  10. Library Media Services Handbook.

    Science.gov (United States)

    Winnipeg School Div. Number 1, Manitoba (Canada).

    This 1991 edition of the handbook for Winnipeg School Division Number 1 school library media programs presents detailed program guidelines, objectives, philosophies, and goals in five major sections: (1) Library Policy and Practices (statement of the division's educational philosophy and goals, philosophy and goals of the division's library…

  11. Rockin' Readers Coordinator Handbook.

    Science.gov (United States)

    Alachua County Schools, Gainesville, FL.

    This coordinator's handbook describes the "Rockin' Readers" program, in which senior-citizen volunteers are matched with specifically targeted at-risk children (usually of kindergarten age or slightly older) in Alachua County, Florida, who tested below their peer group in language development and reading readiness skills. The handbook…

  12. APA Educational Psychology Handbook

    Science.gov (United States)

    Harris, Karen R., Ed.; Graham, Steve, Ed.; Urdan, Tim, Ed.

    2011-01-01

    The "APA Educational Psychology Handbook" reflects the broad nature of the field today, with state-of-the-science reviews of the diverse critical theories driving research and practice; in-depth investigation of the range of individual differences and cultural/contextual factors that affect student achievement, motivation, and beliefs; and close…

  13. Nuclear safeguards technology handbook

    Energy Technology Data Exchange (ETDEWEB)

    1977-12-01

    The purpose of this handbook is to present to United States industrial organizations the Department of Energy's (DOE) Safeguards Technology Program. The roles and missions for safeguards in the U.S. government and application of the DOE technology program to industry safeguards planning are discussed. A guide to sources and products is included. (LK)

  14. Handbook of Agricultural Geophysics

    Science.gov (United States)

    Geophysical methods continue to show great promise for use in agriculture. The term “agricultural geophysics” denotes a subdiscipline of geophysics that is focused only on agricultural applications. The Handbook of Agricultural Geophysics was compiled to include a comprehensive overview of the geoph...

  15. Handbook of Plant Virology

    NARCIS (Netherlands)

    Khan, J.A.; Dijkstra, J.

    2006-01-01

    The Handbook of Plant Virology is a comprehensive guide to the terms and expressions commonly used in the study of plant virology, complete with descriptions of plant virus families down to the generic level. Rather than simply listing terms in alphabetical order, this unique book links each term to

  16. Handbook of nanomaterials properties

    CERN Document Server

    Luo, Dan; Schricker, Scott R; Sigmund, Wolfgang; Zauscher, Stefan

    2014-01-01

    Nanomaterials attract tremendous attention in recent researches. Although extensive research has been done in this field it still lacks a comprehensive reference work that presents data on properties of different Nanomaterials. This Handbook of Nanomaterials Properties will be the first single reference work that brings together the various properties with wide breadth and scope.

  17. Handbook of Moral Development

    Science.gov (United States)

    Killen, Melanie; Smetana, Judith

    2006-01-01

    The psychological study of moral development has expanded greatly, both in terms of the diversity of theoretical perspectives that are represented in the field, as well as in the range of topics that have been studied. This "Handbook of Moral Development" represents the diversity and multidisciplinary influences on current theorizing about the…

  18. Handbook for Learning Centers.

    Science.gov (United States)

    Norwalk Board of Education, CT.

    The handbook for learning centers contains guidelines, forms, and supplementary information to be used with all children identified as having a learning disability, mild retardation, or sensory deprivation in the Norwalk, Connecticut public schools. It is stressed that the learning center should provide supportive services for at least 35 minutes…

  19. APA Educational Psychology Handbook

    Science.gov (United States)

    Harris, Karen R., Ed.; Graham, Steve, Ed.; Urdan, Tim, Ed.

    2011-01-01

    The "APA Educational Psychology Handbook" reflects the broad nature of the field today, with state-of-the-science reviews of the diverse critical theories driving research and practice; in-depth investigation of the range of individual differences and cultural/contextual factors that affect student achievement, motivation, and beliefs;…

  20. Fatigue tests on aluminium bridges

    NARCIS (Netherlands)

    Maljaars, J.; Soetens, F.; Straalen, IJ.J. van

    2004-01-01

    Traffic bridges are subjected to variable loads and should therefore be checked on fatigue. Especially low weight materials, like aluminium, are sensitive to fatigue, because the variable load is a substantial part of the total load. This paper shows the structural design of an aluminium bridge load

  1. Fatigue tests on aluminium bridges

    NARCIS (Netherlands)

    Maljaars, J.; Soetens, F.; Straalen, IJ.J. van

    2005-01-01

    Traffic bridges are subjected to variable loads and should therefore be checked on fatigue. Especially low weight materials, like aluminium, are sensitive to fatigue, because the variable load is a substantial part of the total load. This paper shows the structural design of an aluminium bridge load

  2. Standard and Poor's How to Invest. A Handbook for Buying and Selling Stocks and Bonds.

    Science.gov (United States)

    Standard & Poor's Corp., New York, NY.

    Designed for the general public and possibly suitable also for high school and college economic students, the handbook gives general information about investing in the stock market. Arranged into seven sections, the handbook discusses the typical shareholder, common and preferred stocks, buying and selling bonds, how to develop a personal…

  3. Sports Splash: A Handbook of Reading Activities for Use with Children. A Fun with Reading Book.

    Science.gov (United States)

    Thomas, Carol H.

    Intended for individuals involved in teaching children to read--parents, teachers, librarians, and reading specialists--this handbook provides activities and resources to supplement programs designed to encourage children's enjoyment of books. The reading activities presented in this handbook have been developed around a sports theme. The…

  4. SCM Handbooks for dc-to-dc Converters

    Science.gov (United States)

    Lee, F.; Mohmoud, M.; Yu, Y.

    1984-01-01

    Two documents aid in design of control modules for dc-to-dc converters. Features of SCM include: Adaptive stability, power component stress limiting, implementation of various control laws, unified design approach. Analysis and quidelines contained in handbooks enable engineer to design SCM circuit and confidently predict resulting overall performance.

  5. Advanced tribology design tools for space mechanisms

    Science.gov (United States)

    Roberts, E. W.; Lewis, S. D.

    2001-09-01

    The purpose of this paper is to report on the current status of, and updates to, three well-established ESTL/TM design aids and tools which are frequently used in the design of spacecraft mechanisms. The design aids covered are: - Space Tribology Handbook - DOLLS: a database on space oils and greases - CABARET: a ball bearing analysis code. The Space Tribology Handbook has become established as the definitive guide to space tribology. This paper reports on updates made to the Handbook and the plans to incorporate it into ECSS Guidelines. The database known as DOLLS provides the fundamental information needed for selection of a fluid lubricant for space applications. The database is being upgraded to include details on new oils and greases and, where available, new data on the characteristics of listed fluid lubricants. The bearing analysis code, CABARET, allows the prediction of bearing performance for a range of applications from low-speed mechanisms to high-speed turbo-pumps. Its predictive capabilities include torque, contact stress, stiffness thermal effects, cage motion, and fatigue life. Each design aid and its current status are discussed further.

  6. Titanium in fatigue critical military aircraft structure

    Energy Technology Data Exchange (ETDEWEB)

    Gillespie, F.

    1999-07-01

    This paper discusses the effect of fatigue requirements on titanium structure in military aircraft applications, specifically, fighter aircraft. The discussion covers how fatigue affects the design and analysis of detail parts, and how manufacturing processes affect the fatigue performance of titanium structure. Criteria for designing fighter aircraft have evolved from simple strength calculations to extremely complex computer generated analyses involving strength, durability, damage tolerance and fatigue. Fatigue life prediction is an important part of these analyses and dramatically affects the design and weight of fighter aircraft. Manufacturing processes affect fatigue performance both in a positive and negative manner. Designers must allow for the effect of these processes on titanium structure and consider the efficiency and economy of adding processes that increase fatigue life.

  7. Fatigue (PDQ)

    Science.gov (United States)

    ... of daily living . Better quality of life . More satisfaction with life. A greater sense of well-being. ... and decrease fatigue. The importance of eating enough food and drinking enough fluids. Physical therapy for patients ...

  8. Fatigue Design of Step Pin of the Escalator Chain%自动扶梯梯级链销轴的疲劳设计

    Institute of Scientific and Technical Information of China (English)

    王胜; 叶斌

    2012-01-01

    The normal type and structure of the escalator chain are introduced. Taking one type of the public transportation escalator as object, optimization design and three - dimensional modeling of step pin are carried out, the fatigue test of the design is carried out, and unlimited lifetime can he reached.%介绍梯级链常用型式和结构,选取公共交通型重载自动扶梯链为对象,对其梯级销轴进行三维建模和优化设计,并对设计进行疲劳测试,达到无限疲劳寿命.

  9. 76 FR 60474 - Commercial Item Handbook

    Science.gov (United States)

    2011-09-29

    ... Defense Acquisition Regulations System Commercial Item Handbook AGENCY: Defense Acquisition Regulations... Commercial Item Handbook. The purpose of the Handbook is to help acquisition personnel develop sound business... the Handbook. DATES: Comments should be submitted in writing to the address shown below on or before...

  10. Review of Handbook of New Age

    DEFF Research Database (Denmark)

    Davidsen, Markus Altena

    2011-01-01

    Review of Daren Kemp & James R. Lewis (eds.), Handbook of New Age, in the series Brill Handbooks on Contemporary Religion 1, 2007, Leiden & Boston: Brill.......Review of Daren Kemp & James R. Lewis (eds.), Handbook of New Age, in the series Brill Handbooks on Contemporary Religion 1, 2007, Leiden & Boston: Brill....

  11. Engineering Design Handbook. Military Vehicle

    Science.gov (United States)

    1998-05-01

    Turbine Fuel, Aviation, Grades JP-4, JP-5, and JP-5/JP-8 St. MIL-F-46162 Fuel, Diesel, Referee Grade MIL-T-83133 Turbine Fuel, Aviation, Kerosene Types...AIR 1 FLOW s —7* — PI — PI tESS. tESS. DRC DRC IP VS P VS OIL AIR FLO! FL01 1 4 -116 14 12 5 B M - 10 ^* o o... DRC DRG P VS P VS OIL AIR FL01 FLOI 1 1 35 a 30 -5 -25 20 15 10 100 200 300 400 AIR FLOW, lb/mln 500 6O0 8-31-1972 100

  12. Preliminary Common Module Design Handbook.

    Science.gov (United States)

    1976-04-02

    consists of two amp I i • >•<•/ cont r0\\ »to««« and • light emitting diode ( LUI driver stege The implementet • or uses 12 duel-’n- 1...0* yolttAMtt • » Jk • »0*1 «ol(«/Mtt f 90 •ifltMitti 7.1 to 11 «U ai—tor« ’o’ IntO’fOCO irtforwt • on »weh O« « ocho *>»col

  13. Engineering Design Handbook: Value Engineering

    Science.gov (United States)

    1971-07-20

    to a lectern! The use of flip charts is extremely effective, particularly where the audience is small enough for the graphics on the chart to be...clearly legible. And the most dramatic way to use a flip chart is for the speaker to develop the material as he goes. This doesn’t mean he has to...that which is visual. Whenever the content of the delivery shifts to a topic not illustrated on the flip chart , tum to a blank sheet, or at least to

  14. The data analysis handbook

    CERN Document Server

    Frank, IE

    1994-01-01

    Analyzing observed or measured data is an important step in applied sciences. The recent increase in computer capacity has resulted in a revolution both in data collection and data analysis. An increasing number of scientists, researchers and students are venturing into statistical data analysis; hence the need for more guidance in this field, which was previously dominated mainly by statisticians. This handbook fills the gap in the range of textbooks on data analysis. Written in a dictionary format, it will serve as a comprehensive reference book in a rapidly growing field. However, this book is more structured than an ordinary dictionary, where each entry is a separate, self-contained entity. The authors provide not only definitions and short descriptions, but also offer an overview of the different topics. Therefore, the handbook can also be used as a companion to textbooks for undergraduate or graduate courses. 1700 entries are given in alphabetical order grouped into 20 topics and each topic is organized...

  15. Handbook of Practical Astronomy

    CERN Document Server

    Roth, Günter D

    2009-01-01

    With amateurs, students, and teachers of astronomy in high schools and colleges particularly in mind, the Handbook of Practical Astronomy is an essential source to demonstrate trends and variety of astronomical observations. The book presents the substance of celestial bodies for the amateur observer: the planets, the stars, and the galaxies. The sun is the local link to the other stars, the nexus of cosmic evolution. The solar system is made up by the sun and all the celestial bodies orbit it. This system is of special interest for the observing amateur. The Handbook of Practial Astronomy spans astronomy, education and computing. Like many other fields of science, astronomy has become digitized and data rich in recent years. Besides the references at the end of each chapter, there are the notes in the margins with astronomical news and observing highlights on the web.

  16. Handbook of Brain Connectivity

    CERN Document Server

    Jirsa, Viktor K

    2007-01-01

    Our contemporary understanding of brain function is deeply rooted in the ideas of the nonlinear dynamics of distributed networks. Cognition and motor coordination seem to arise from the interactions of local neuronal networks, which themselves are connected in large scales across the entire brain. The spatial architectures between various scales inevitably influence the dynamics of the brain and thereby its function. But how can we integrate brain connectivity amongst these structural and functional domains? Our Handbook provides an account of the current knowledge on the measurement, analysis and theory of the anatomical and functional connectivity of the brain. All contributors are leading experts in various fields concerning structural and functional brain connectivity. In the first part of the Handbook, the chapters focus on an introduction and discussion of the principles underlying connected neural systems. The second part introduces the currently available non-invasive technologies for measuring struct...

  17. Handbook of electroporation

    CERN Document Server

    2017-01-01

    This major reference work is a one-shot knowledge base on electroporation and the use of pulsed electric fields of high intensity and their use in biology, medicine, biotechnology, and food and environmental technologies. The Handbook offers a widespread and well-structured compilation of 156 chapters ranging from the foundations to applications in industry and hospital. It is edited and written by most prominent researchers in the field. With regular updates and growing in its volume it is suitable for academic readers and researchers regardless of their disciplinary expertise, and will also be accessible to students and serious general readers. The Handbook's 276 authors have established scholarly credentials and come from a wide range of disciplines. This is crucially important in a highly interdisciplinary field of electroporation and the use of pulsed electric fields of high intensity and its applications in different fields from medicine, biology, food proce ssing, agriculture, process engineering, en...

  18. Springer handbook of spacetime

    CERN Document Server

    Petkov, Vesselin

    2014-01-01

    The Springer Handbook of Spacetime is dedicated to the ground-breaking paradigm shifts embodied in the two relativity theories, and describes in detail the profound reshaping of physical sciences they ushered in. It includes in a single volume chapters on foundations, on the underlying mathematics, on physical and astrophysical implications, experimental evidence and cosmological predictions, as well as chapters on efforts to unify general relativity and quantum physics. The Handbook can be used as a desk reference by researchers in a wide variety of fields, not only by specialists in relativity but also by researchers in related areas that either grew out of, or are deeply influenced by, the two relativity theories: cosmology, astronomy and astrophysics, high energy physics, quantum field theory, mathematics, and philosophy of science. It should also serve as a valuable resource for graduate students and young researchers entering these areas, and for instructors who teach courses on these subjects. The Han...

  19. Handbook of gas hydrate properties and occurrence

    Energy Technology Data Exchange (ETDEWEB)

    Kuustraa, V.A.; Hammershaimb, E.C.

    1983-12-01

    This handbook provides data on the resource potential of naturally occurring hydrates, the properties that are needed to evaluate their recovery, and their production potential. The first two chapters give data on the naturally occurring hydrate potential by reviewing published resource estimates and the known and inferred occurrences. The third and fourth chapters review the physical and thermodynamic properties of hydrates, respectively. The thermodynamic properties of hydrates that are discussed include dissociation energies and a simplified method to calculate them; phase diagrams for simple and multi-component gases; the thermal conductivity; and the kinetics of hydrate dissociation. The final chapter evaluates the net energy balance of recovering hydrates and shows that a substantial positive energy balance can theoretically be achieved. The Appendices of the Handbook summarize physical and thermodynamic properties of gases, liquids and solids that can be used in designing and evaluating recovery processes of hydrates. 158 references, 67 figures, 47 tables.

  20. Copyright for librarians the essential handbook

    CERN Document Server

    Berkman Center for Internet and Society

    2012-01-01

    "Copyright for Librarians" (CFL) is an online open curriculum on copyright law that was developed jointly with Harvard’s Berkman Center for Internet and Society. Re-designed as a brand new textbook, "Copyright for Librarians: the essential handbook" can be used as a stand-alone resource or as an adjunct to the online version which contains additional links and references for students who wish to pursue any topic in greater depth. Delve into copyright theory or explore enforcement. With a new index and a handy Glossary, the Handbook is essential reading for librarians who want to hone their skills in 2013, and for anyone learning about or teaching copyright law in the information field.

  1. Fuel Cell Handbook, Fifth Edition

    Energy Technology Data Exchange (ETDEWEB)

    Energy and Environmental Solutions

    2000-10-31

    Progress continues in fuel cell technology since the previous edition of the Fuel Cell Handbook was published in November 1998. Uppermost, polymer electrolyte fuel cells, molten carbonate fuel cells, and solid oxide fuel cells have been demonstrated at commercial size in power plants. The previously demonstrated phosphoric acid fuel cells have entered the marketplace with more than 220 power plants delivered. Highlighting this commercial entry, the phosphoric acid power plant fleet has demonstrated 95+% availability and several units have passed 40,000 hours of operation. One unit has operated over 49,000 hours. Early expectations of very low emissions and relatively high efficiencies have been met in power plants with each type of fuel cell. Fuel flexibility has been demonstrated using natural gas, propane, landfill gas, anaerobic digester gas, military logistic fuels, and coal gas, greatly expanding market opportunities. Transportation markets worldwide have shown remarkable interest in fuel cells; nearly every major vehicle manufacturer in the U.S., Europe, and the Far East is supporting development. This Handbook provides a foundation in fuel cells for persons wanting a better understanding of the technology, its benefits, and the systems issues that influence its application. Trends in technology are discussed, including next-generation concepts that promise ultrahigh efficiency and low cost, while providing exceptionally clean power plant systems. Section 1 summarizes fuel cell progress since the last edition and includes existing power plant nameplate data. Section 2 addresses the thermodynamics of fuel cells to provide an understanding of fuel cell operation at two levels (basic and advanced). Sections 3 through 8 describe the six major fuel cell types and their performance based on cell operating conditions. Alkaline and intermediate solid state fuel cells were added to this edition of the Handbook. New information indicates that manufacturers have stayed

  2. [Auditory fatigue].

    Science.gov (United States)

    Sanjuán Juaristi, Julio; Sanjuán Martínez-Conde, Mar

    2015-01-01

    Given the relevance of possible hearing losses due to sound overloads and the short list of references of objective procedures for their study, we provide a technique that gives precise data about the audiometric profile and recruitment factor. Our objectives were to determine peripheral fatigue, through the cochlear microphonic response to sound pressure overload stimuli, as well as to measure recovery time, establishing parameters for differentiation with regard to current psychoacoustic and clinical studies. We used specific instruments for the study of cochlear microphonic response, plus a function generator that provided us with stimuli of different intensities and harmonic components. In Wistar rats, we first measured the normal microphonic response and then the effect of auditory fatigue on it. Using a 60dB pure tone acoustic stimulation, we obtained a microphonic response at 20dB. We then caused fatigue with 100dB of the same frequency, reaching a loss of approximately 11dB after 15minutes; after that, the deterioration slowed and did not exceed 15dB. By means of complex random tone maskers or white noise, no fatigue was caused to the sensory receptors, not even at levels of 100dB and over an hour of overstimulation. No fatigue was observed in terms of sensory receptors. Deterioration of peripheral perception through intense overstimulation may be due to biochemical changes of desensitisation due to exhaustion. Auditory fatigue in subjective clinical trials presumably affects supracochlear sections. The auditory fatigue tests found are not in line with those obtained subjectively in clinical and psychoacoustic trials. Copyright © 2013 Elsevier España, S.L.U. y Sociedad Española de Otorrinolaringología y Patología Cérvico-Facial. All rights reserved.

  3. Industrial communication technology handbook

    CERN Document Server

    Zurawski, Richard

    2014-01-01

    Featuring contributions from major technology vendors, industry consortia, and government and private research establishments, the Industrial Communication Technology Handbook, Second Edition provides comprehensive and authoritative coverage of wire- and wireless-based specialized communication networks used in plant and factory automation, automotive applications, avionics, building automation, energy and power systems, train applications, and more.New to the Second Edition:46 brand-new chapters and 21 substantially revised chaptersInclusion of the latest, most significant developments in spe

  4. Newnes communications technology handbook

    CERN Document Server

    Lewis, Geoff

    1994-01-01

    Newnes Communications Technology Handbook provides a discussion on different topics relevant to communications technology. The book is comprised of 39 chapters that tackle a wide variety of concern in communications technology. The coverage of the text includes technologies, such as analog digital communications systems, radio frequency receiver, and satellite systems. The book also discusses some methods and techniques used in communications technology, including mixer signal processing, modulation and demodulation, and spread spectrum techniques. The text will be of great use to engineers, t

  5. Fixed mobile convergence handbook

    CERN Document Server

    Ahson, Syed A

    2010-01-01

    From basic concepts to future directions, this handbook provides technical information on all aspects of fixed-mobile convergence (FMC). The book examines such topics as integrated management architecture, business trends and strategic implications for service providers, personal area networks, mobile controlled handover methods, SIP-based session mobility, and supervisory and notification aggregator service. Case studies are used to illustrate technical and systematic implementation of unified and rationalized internet access by fixed-mobile network convergence. The text examines the technolo

  6. Joint Program Management Handbook

    Science.gov (United States)

    1994-12-01

    the Engieermg and Manufacuring Devopment Phase. Nfilestoae HI- Develommen Annros Devopment approval marks a significant step for any program, but it is...to review concept formulaton. Systems Engilneertn As with service programs, systems engineering in joint program management is an essential tool . I...MANAGEMENT HANDBOOK On=e wd Umawtaiutt As discussed in Chapter 7, systems analysis of relationships is a usef tool for joint program managers. The joint

  7. The universal access handbook

    CERN Document Server

    Stephanidis, Constantine

    2009-01-01

    In recent years, the field of Universal Access has made significant progress in consolidating theoretical approaches, scientific methods and technologies, as well as in exploring new application domains. Increasingly, professionals in this rapidly maturing area require a comprehensive and multidisciplinary resource that addresses current principles, methods, and tools. Written by leading international authorities from academic, research, and industrial organizations and nonmarket institutions, The Universal Access Handbook covers the unfolding scientific, methodological, technological, and pol

  8. Handbook on electronic commerce

    Energy Technology Data Exchange (ETDEWEB)

    Shaw, M. [Illinois Univ., Urbana, IL (United States). Beckman Inst. for Advanced Science and Technology; Blanning, R. [Vanderbilt Univ., Nashville, TN (United States). Owen Graduate School of Management; Strader, T. [Iowa State Univ., Ames, IA (United States). Management Information Systems; Whinston, A. [eds.] [Texas Univ., Austin, TX (United States). Dept. of Management Science and Information Systems

    2000-07-01

    The world is undergoing a revolution to a digital economy, with pronounced implications for corporate strategy, marketing, operations, information systems, customer services, global supply-chain management, and product distribution. This handbook examines the aspects of electronic commerce, including electronic storefront, on-line business, consumer interface, business-to-business networking, digital payment, legal issues, information product development, and electronic business models. Indispensable for academics, students and professionals who are interested in Electronic Commerce and Internet Business. (orig.)

  9. Standard interface file handbook

    Energy Technology Data Exchange (ETDEWEB)

    Shapiro, A.; Huria, H.C. (Cincinnati Univ., OH (United States))

    1992-10-01

    This handbook documents many of the standard interface file formats that have been adopted by the US Department of Energy to facilitate communications between and portability of, various large reactor physics and radiation transport software packages. The emphasis is on those files needed for use of the VENTURE/PC diffusion-depletion code system. File structures, contents and some practical advice on use of the various files are provided.

  10. Handbook of wafer bonding

    CERN Document Server

    Ramm, Peter; Taklo, Maaike M V

    2011-01-01

    Written by an author and editor team from microsystems companies and industry-near research organizations, this handbook and reference presents dependable, first-hand information on bonding technologies.In the first part, researchers from companies and institutions around the world discuss the most reliable and reproducible technologies for the production of bonded wafers. The second part is devoted to current and emerging applications, including microresonators, biosensors and precise measuring devices.

  11. Chronic Fatigue Syndrome

    Science.gov (United States)

    Chronic fatigue syndrome (CFS) is a disorder that causes extreme fatigue. This fatigue is not the kind of tired feeling that ... activities. The main symptom of CFS is severe fatigue that lasts for 6 months or more. You ...

  12. Handbook for TEAC Auditors, 2011

    Science.gov (United States)

    Teacher Education Accreditation Council, 2011

    2011-01-01

    This handbook is primarily for the Teacher Education Accreditation Council (TEAC) auditor. It is intended to help in preparing for audits of "Inquiry Briefs" and "Inquiry Brief Proposals" and to contribute to the writing of the audit report. This handbook contains a full description of the audit process, the responsibilities of…

  13. Anmeldelse: The Writer's Handbooks 2009

    DEFF Research Database (Denmark)

    Bonde, Lars Ole

    2008-01-01

    Anmeldelse af: Barry Turner (red.) (2008) The Writer’s Handbook 2009. The complete guide for all writers, publishers, editors, agents, and broadcasts. New York: MacMillan Barry Turner (red.) (2008) The Screenwriter’s Handbook 2009. The essential companion for screenwriters. New York: MacMillan...

  14. Handbook on Innovations in Learning

    Science.gov (United States)

    Murphy, Marilyn, Ed.; Redding, Sam, Ed.; Twyman, Janet, Ed.

    2013-01-01

    The "Handbook on Innovations in Learning" focuses on innovations--both methodological and technological--in teaching and learning that promise to surpass standard practice in achieving learning outcomes for students. The experts who have written chapters in this Handbook first identify the underlying principles of learning and then…

  15. Pottery from Pakistan. A Handbook.

    Science.gov (United States)

    Rammage, Alix

    One of three handbooks dealing with pottery traditions from around the world, this packet draws together information about historical, ethnographic, and pottery traditions of Pakistan. The handbook begins with a brief discussion of Pakistan's land and people, a short history of Pakistan, Islamic pottery traditions, and Pakistan potters and…

  16. Anmeldelse: The Writer's Handbooks 2009

    DEFF Research Database (Denmark)

    Bonde, Lars Ole

    2008-01-01

    Anmeldelse af: Barry Turner (red.) (2008) The Writer’s Handbook 2009. The complete guide for all writers, publishers, editors, agents, and broadcasts. New York: MacMillan Barry Turner (red.) (2008) The Screenwriter’s Handbook 2009. The essential companion for screenwriters. New York: MacMillan...

  17. Consumer's Resource Handbook. 1988 Edition.

    Science.gov (United States)

    Office of Consumer Affairs, Washington, DC.

    This handbook is intended to help consumers exercise their rights in the marketplace in three ways: (1) it shows how to communicate more effectively with manufacturers, retailers, and service providers; (2) it is a self-help manual for resolving in dividual consumer complaints; and (3) it lists helpful sources of assistance. The handbook has two…

  18. The small library manager's handbook

    CERN Document Server

    Graves, Alice

    2014-01-01

    The Small Library Manager's Handbook is for librarians working in all types of small libraries. It covers the everyday nuts-and-bolts operations that all librarians must perform. This handbook, written by experts who are small librarians themselves, will help all small librarians to do multiple jobs at the same time.

  19. Revising Academic Library Governance Handbooks

    OpenAIRE

    2015-01-01

    Original Image by Flickr user Sasquatch 1 (CC BY 2.0), with minimal modification by C. Strunk (10 June 2015). In Brief Regardless of our status (tenure track, non-tenure track, staff, and/or union), academic librarians at colleges and universities may use a handbook or similar document as a framework for self-governance. These handbooks typically cover rank […

  20. Design of a study on suboptimal cognitive acts in the diagnostic process, the effect on patient outcomes and the influence of workload, fatigue and experience of physician

    Directory of Open Access Journals (Sweden)

    van der Wal Gerrit

    2009-04-01

    Full Text Available Abstract Background Diagnostic error is an important error type since diagnostic adverse events are regularly judged as being preventable and the consequences are considered to be severe. Existing research often focuses on either diagnostic adverse events or on the errors in diagnostic reasoning. Whether and when an incorrect diagnostic process results in adverse outcomes has not been studied extensively. The present paper describes the design of a study that aims to study the relationship between a suboptimal diagnostic process and patient outcomes. In addition, the role of personal and circumstantial factors on the quality of the diagnostic process will be examined. Methods/Design The research questions were addressed using several data sources. First, the differential diagnosis was assessed concurrently to the diagnostic process. Second, the patient records of 248 patients suffering from shortness of breath were reviewed by expert internists in order to reveal suboptimal cognitive acts and (potential consequences for the patient. The suboptimal cognitive acts were discussed with the treating physicians and classified with the taxonomy of unsafe acts. Third, workload, fatigue and work experience were measured during the physicians work. Workload and fatigue were measured during the physicians shift using the NASA tlx questionnaire on a handheld computer. Physicians participating in the study also answered questions about their work experience. Discussion The design used in this study provides insight into the relationship between suboptimal cognitive acts in the diagnostic process and possible consequences for the patient. Suboptimal cognitive acts in the diagnostic process and its causes can be revealed. Additional measurements of workload, fatigue and experience allow examining the influence of these factors on the diagnostic process. In conclusion, the present design provides a method with which insights in weaknesses of the diagnostic

  1. Revising Academic Library Governance Handbooks

    Directory of Open Access Journals (Sweden)

    Jen Stevens

    2015-07-01

    Full Text Available Regardless of our status (tenure track, non-tenure track, staff, and/or union, academic librarians at colleges and universities may use a handbook or similar document as a framework for self-governance. These handbooks typically cover rank descriptions, promotion requirements, and grievance rights, among other topics. Unlike employee handbooks used in the corporate world, these documents may be written and maintained by academic librarians themselves1. In 2010, a group of academic librarians at George Mason University was charged with revising our Librarians’ Handbook. Given the dearth of literature about academic librarians’ handbooks and their revision, we anticipate our library colleagues in similar situations will benefit from our experience and recommendations.

  2. Transportation. School Business Management Handbook No. 6. Revised.

    Science.gov (United States)

    Burke, Edmund

    This handbook is designed as a guide for those who may be involved in the administration or management of pupil transportation in New York State. It is especially geared to central, union free, and city districts under 125,000 population, and is designed to complement other New York State Education Department publications. Guidelines include…

  3. Learning Through Media; An IMC Handbook for Chelmsford Teachers.

    Science.gov (United States)

    Morrow, James; Wallace, Daniel

    This handbook is designed to provide basic information that is necessary to use the Chelmsford School System's Instructional Media Center (IMC). It defines six different media (print, sound, television, photography, movies and design) and suggests a series of separate classroom production activities in each. An emphasis is given to the ways in…

  4. Fuel Cell Handbook, Fourth Edition

    Energy Technology Data Exchange (ETDEWEB)

    Stauffer, D.B; Hirschenhofer, J.H.; Klett, M.G.; Engleman, R.R.

    1998-11-01

    Robust progress has been made in fuel cell technology since the previous edition of the Fuel Cell Handbook was published in January 1994. This Handbook provides a foundation in fuel cells for persons wanting a better understanding of the technology, its benefits, and the systems issues that influence its application. Trends in technology are discussed, including next-generation concepts that promise ultra high efficiency and low cost, while providing exceptionally clean power plant systems. Section 1 summarizes fuel cell progress since the last edition and includes existing power plant nameplate data. Section 2 addresses the thermodynamics of fuel cells to provide an understanding of fuel cell operation at two levels (basic and advanced). Sections 3 through 6 describe the four major fuel cell types and their performance based on cell operating conditions. The section on polymer electrolyte membrane fuel cells has been added to reflect their emergence as a significant fuel cell technology. Phosphoric acid, molten carbonate, and solid oxide fuel cell technology description sections have been updated from the previous edition. New information indicates that manufacturers have stayed with proven cell designs, focusing instead on advancing the system surrounding the fuel cell to lower life cycle costs. Section 7, Fuel Cell Systems, has been significantly revised to characterize near-term and next-generation fuel cell power plant systems at a conceptual level of detail. Section 8 provides examples of practical fuel cell system calculations. A list of fuel cell URLs is included in the Appendix. A new index assists the reader in locating specific information quickly.

  5. Fatigue Life Simulation Design and Research of the Taper Leaf Spring on Automobile%汽车少片变截面板簧的疲劳寿命仿真设计

    Institute of Scientific and Technical Information of China (English)

    朱剑宝; 陈建宏; 林平

    2011-01-01

    利用基于非线性有限元仿真分析的疲劳设计方法,对少片变截面板簧进行了疲劳寿命试验仿真分析,确定出板簧的疲劳破坏发生区域,然后基于材料的S-N曲线,利用ANSYS疲劳分析模块进行板簧的疲劳寿命设计计算.该疲劳寿命分析方法可以较准确地得出板簧产品的疲劳寿命,节约了疲劳试验成本.%By using the fatigue life prediction method based on the non-linear finite element model, fatigue life test simulation analysis of the designed taper leaf spring in the paper are performed, then based on the S-N curve of material, detect the fatigue dangerous area and predict fatigue life of the structure in critical location with the help of ANSYS’ Fatigue module, it is feasible to predict fatigue life of leafspring product, reduce fatigue test costs, provide practical significance in engineering.

  6. Handbook of Adhesion, 2nd Edition

    Science.gov (United States)

    Packham, D. E.

    2005-06-01

    This second edition of the successful Handbook of Adhesion provides concise and authoritative articles covering many aspects of the science and technology associated with adhesion and adhesives. It is intended to fill a gap between the necessarily simplified treatment of the student textbook and the full and thorough treatment of the research monograph and review article. The articles are structured in such a way, with internal cross-referencing and external literature references, that the reader can build up a broader and deeper understanding, as their needs require. This second edition includes many new articles covering developments which have risen in prominence in the intervening years, such as scanning probe techniques, the surface forces apparatus and the relation between adhesion and fractal surfaces. Advances in understanding polymer - polymer interdiffusion are reflected in articles drawing out the implications for adhesive bonding. In addition, articles derived from the earlier edition have been revised and updated where needed. Throughout the book there is a renewed emphasis on environmental implications of the use of adhesives and sealants. The scope of the Handbook, which features nearly 250 articles from over 60 authors, includes the background science - physics, chemistry and material science - and engineering, and also aspects of adhesion relevant to the use of adhesives, including topics such as: Sealants and mastics Paints and coatings Printing and composite materials Welding and autohesion Engineering design The Handbook of Adhesion is intended for scientists and engineers in both academia and industry, requiring an understanding of the various facets of adhesion.

  7. EVAPRED - A CODE FOR FATIGUE ANALYSIS OPTIMIZATION

    Directory of Open Access Journals (Sweden)

    Dorin LOZICI-BRÎNZEI

    2010-03-01

    Full Text Available The fatigue can be, in fact, defined as: “failure under a repeated or otherwise varying load, which never reaches a level sufficient to cause failure in a single application”.Physical testing is clearly unrealistic for every design component. In most applications, fatigue-safe life design requires the prediction of the component fatigue life that accounts for predicted service loads and materials. The primary tool for both understanding and being able to predict and avoid fatigue has proven to be the finite element analysis (FEA. Computer-aided engineering (CAE programs use three major methods to determine the total fatigue life: Stress life (SN, Strain life (EN and Fracture Mechanics (FM. FEA can predict stress concentration areas and can help design engineers to predict how long their designs are likely to last before experiencing the onset of fatigue.

  8. Seafarer fatigue

    DEFF Research Database (Denmark)

    Jepsen, Jørgen Riis; Zhao, Zhiwei; van Leeuwen, Wessel M. A.

    2015-01-01

    Background: The consequences of fatigue for the health and safety of seafarers has caused concern in the industry and among academics, and indicates the importance of further research into risk factors and preventive interventions at sea. This review gives an overview of the key issues relating...

  9. Mechanical engineers' handbook, materials and engineering mechanics

    CERN Document Server

    Kutz, Myer

    2015-01-01

    Full coverage of materials and mechanical design inengineering Mechanical Engineers' Handbook, Fourth Edition provides aquick guide to specialized areas you may encounter in your work,giving you access to the basics of each and pointing you towardtrusted resources for further reading, if needed. The accessibleinformation inside offers discussions, examples, and analyses ofthe topics covered. This first volume covers materials and mechanical design, givingyou accessible and in-depth access to the most common topics you'llencounter in the discipline: carbon and alloy steels, stainlesssteels, a

  10. The Corrosion Fatigue Properties of High Performance Concrete

    Institute of Scientific and Technical Information of China (English)

    CHEN Shuanfa; ZHENG Mulian; LIAO Weidong; WANG Binggang

    2005-01-01

    With the loading test equipment of corrosion fatigue specially designed, the corrosion fatigue characteristics of high performance concrete (HPC) withstanding the interaction of third point fatigue loading and Na2SO4 solution were investigated and analyzed. The experimental results indicate that water-binder ratio evidently influences the corrosion fatigue characteristics of HPC, and a moderate quantitative fine mineral admixture enhances the corrosion fatigue resistance of HPC. The effect is more significant when fly ash and silica fume are added.

  11. Handbook of mathematics

    CERN Document Server

    Kuipers, L

    1969-01-01

    International Series of Monographs in Pure and Applied Mathematics, Volume 99: Handbook of Mathematics provides the fundamental mathematical knowledge needed for scientific and technological research. The book starts with the history of mathematics and the number systems. The text then progresses to discussions of linear algebra and analytical geometry including polar theories of conic sections and quadratic surfaces. The book then explains differential and integral calculus, covering topics, such as algebra of limits, the concept of continuity, the theorem of continuous functions (with examp

  12. Handbook of molecular plasmonics

    CERN Document Server

    Sala, Fabio Della

    2013-01-01

    While several reviews and books on surface nanophotonics and fluorescence spectroscopy are available, an updated focus on molecular plasmonics, including both theoretical methods and experimental aspects, is still lacking. This handbook is a comprehensive overview on the physics of the plasmon-emitter interaction, ranging from electromagnetism to quantum mechanics, from metal-enhanced fluorescence to surface-enhanced Raman scattering, from optical microscopy to synthesis of metal nanoparticles, filling the gap in the literature of this merging field. It allows experimentalists to have a solid

  13. The sound handbook

    CERN Document Server

    Crook, Tim

    2013-01-01

    'Tim Crook has written an important and much-needed book, and its arrival on our shelves has come at a highly appropriate time.' Professor Seán Street, Bournemouth UniversityThe Sound Handbook maps theoretical and practical connections between the creation and study of sound across the multi-media spectrum of film, radio, music, sound art, websites, animation and computer games entertainment, and stage theatre. Using an interdisciplinary approach Tim Crook explores the technologies, philosophies and cultural issues involved in making a

  14. Computer Security Handbook

    CERN Document Server

    Bosworth, Seymour; Whyne, Eric

    2012-01-01

    The classic and authoritative reference in the field of computer security, now completely updated and revised With the continued presence of large-scale computers; the proliferation of desktop, laptop, and handheld computers; and the vast international networks that interconnect them, the nature and extent of threats to computer security have grown enormously. Now in its fifth edition, Computer Security Handbook continues to provide authoritative guidance to identify and to eliminate these threats where possible, as well as to lessen any losses attributable to them. With seventy-seven chapter

  15. Computer science handbook

    CERN Document Server

    Tucker, Allen B

    2004-01-01

    Due to the great response to the famous Computer Science Handbook edited by Allen B. Tucker, … in 2004 Chapman & Hall/CRC published a second edition of this comprehensive reference book. Within more than 70 chapters, every one new or significantly revised, one can find any kind of information and references about computer science one can imagine. … All in all, there is absolute nothing about computer science that can not be found in the encyclopedia with its 110 survey articles …-Christoph Meinel, Zentralblatt MATH

  16. Electric power distribution handbook

    CERN Document Server

    Short, Thomas Allen

    2014-01-01

    Of the ""big three"" components of electrical infrastructure, distribution typically gets the least attention. In fact, a thorough, up-to-date treatment of the subject hasn't been published in years, yet deregulation and technical changes have increased the need for better information. Filling this void, the Electric Power Distribution Handbook delivers comprehensive, cutting-edge coverage of the electrical aspects of power distribution systems. The first few chapters of this pragmatic guidebook focus on equipment-oriented information and applications such as choosing transformer connections,

  17. Seals and sealing handbook

    CERN Document Server

    Flitney, Robert K

    2014-01-01

    Seals and Sealing Handbook, 6th Edition provides comprehensive coverage of sealing technology, bringing together information on all aspects of this area to enable you to make the right sealing choice. This includes detailed coverage on the seals applicable to static, rotary and reciprocating applications, the best materials to use in your sealing systems, and the legislature and regulations that may impact your sealing choices. Updated in line with current trends this updated reference provides the theory necessary for you to select the most appropriate seals for the job and with its 'Failur

  18. Communications technology handbook

    CERN Document Server

    Lewis, Geoff

    2013-01-01

    This is the first point of reference for the communications industries. It offers an introduction to a wide range of topics and concepts encountered in the field of communications technology. Whether you are looking for a simple explanation, or need to go into a subject in more depth, the Communications Technology Handbook provides all the information you need in one single volume.This second edition has been updated to include the latest technology including: Video on DemandWire-less Distribution systemsHigh spee

  19. Handbook of linear algebra

    CERN Document Server

    Hogben, Leslie

    2013-01-01

    With a substantial amount of new material, the Handbook of Linear Algebra, Second Edition provides comprehensive coverage of linear algebra concepts, applications, and computational software packages in an easy-to-use format. It guides you from the very elementary aspects of the subject to the frontiers of current research. Along with revisions and updates throughout, the second edition of this bestseller includes 20 new chapters.New to the Second EditionSeparate chapters on Schur complements, additional types of canonical forms, tensors, matrix polynomials, matrix equations, special types of

  20. The branch librarians' handbook

    CERN Document Server

    Rivers, Vickie

    2004-01-01

    ""Recommended""--Booklist; ""an excellent addition...highly recommended""--Public Libraries; ""clear...very sound advice...strongly recommend""--Catholic Library World; ""excellent resource...organized...well written""--Against the Grain; ""interesting...thoroughly practical...a very good book...well organized...clearly written""--ARBA. This handbook covers a wide variety of issues that the branch librarian must deal with every day. Chapters are devoted to mission statements (the Dallas Public Library and Dayton Metro Library mission statements are highlighted as examples), library systems,

  1. Handbook for sound engineers

    CERN Document Server

    Ballou, Glen

    2015-01-01

    Handbook for Sound Engineers is the most comprehensive reference available for audio engineers, and is a must read for all who work in audio.With contributions from many of the top professionals in the field, including Glen Ballou on interpretation systems, intercoms, assistive listening, and fundamentals and units of measurement, David Miles Huber on MIDI, Bill Whitlock on audio transformers and preamplifiers, Steve Dove on consoles, DAWs, and computers, Pat Brown on fundamentals, gain structures, and test and measurement, Ray Rayburn on virtual systems, digital interfacing, and preamplifiers

  2. Capability Handbook- offline metrology

    DEFF Research Database (Denmark)

    Islam, Aminul; Marhöfer, David Maximilian; Tosello, Guido

    This offline metrological capability handbook has been made in relation to HiMicro Task 3.3. The purpose of this document is to assess the metrological capability of the HiMicro partners and to gather the information of all available metrological instruments in the one single document. It provides...... a quick overview of what is possible today by the state of the art, what the HiMicro consortium can do and what metrological requirements we have concerning the HiMicro industrial demonstrators....

  3. Project Management Handbook

    OpenAIRE

    Hyttinen, Kirsi

    2017-01-01

    “Project Management has become a core competency, and nearly every manager is involved in managing one or more projects. Moreover, the role of projects in organisations is receiving increasing attention.” In almost every organisation, projects are planned and run on a daily basis. At the same time, we are living in a hectic world with no time for massive reading exercises. This handbook aims to support both perspectives: to run projects smoothly, and to quickly find topics that are releva...

  4. Handbook of information science

    CERN Document Server

    Stock, Wolfgang G

    2013-01-01

    Dealing with information is one of the vital skills in thetwenty-first century. It takes a fair degree of information savvy to create, represent and supply information as well as to search for and retrieve relevant knowledge. This Handbook is a basic work of information science, providing a comprehensive overview of the current state of information retrieval and knowledge representation. It addresses readers from all professions and scientific disciplines, but particularly scholars, practitioners and students of Information Science, Library Science, Computer Science, Information Management, an

  5. Handbook for sound engineers

    CERN Document Server

    Ballou, Glen

    2013-01-01

    Handbook for Sound Engineers is the most comprehensive reference available for audio engineers. All audio topics are explored: if you work on anything related to audio you should not be without this book! The 4th edition of this trusted reference has been updated to reflect changes in the industry since the publication of the 3rd edition in 2002 -- including new technologies like software-based recording systems such as Pro Tools and Sound Forge; digital recording using MP3, wave files and others; mobile audio devices such as iPods and MP3 players. Over 40 topic

  6. Handbook of enumerative combinatorics

    CERN Document Server

    Bona, Miklos

    2015-01-01

    Presenting the state of the art, the Handbook of Enumerative Combinatorics brings together the work of today's most prominent researchers. The contributors survey the methods of combinatorial enumeration along with the most frequent applications of these methods.This important new work is edited by Miklós Bóna of the University of Florida where he is a member of the Academy of Distinguished Teaching Scholars. He received his Ph.D. in mathematics at Massachusetts Institute of Technology in 1997. Miklós is the author of four books and more than 65 research articles, including the award-winning C

  7. Handbook of graph theory

    CERN Document Server

    Gross, Jonathan L; Zhang, Ping

    2013-01-01

    In the ten years since the publication of the best-selling first edition, more than 1,000 graph theory papers have been published each year. Reflecting these advances, Handbook of Graph Theory, Second Edition provides comprehensive coverage of the main topics in pure and applied graph theory. This second edition-over 400 pages longer than its predecessor-incorporates 14 new sections. Each chapter includes lists of essential definitions and facts, accompanied by examples, tables, remarks, and, in some cases, conjectures and open problems. A bibliography at the end of each chapter provides an ex

  8. Handbook of thermoluminescence

    CERN Document Server

    Furetta, Claudio

    2010-01-01

    This second edition of the Handbook of Thermoluminescence enlarges on all the subjects which were treated in the first edition and adds further arguments, including the theory of thermoluminescent dose measurement, several examples concerning the kinetics parameters determination using various methods such as peak shape, isothermal decay, and so on. A special section is devoted to food irradiation, an important subject at the present time, and to the thermoluminescent characterization of the minerals extracted from the irradiated food. Another new section is devoted to the thermoluminescent ph

  9. The image processing handbook

    CERN Document Server

    Russ, John C

    2006-01-01

    Now in its fifth edition, John C. Russ's monumental image processing reference is an even more complete, modern, and hands-on tool than ever before. The Image Processing Handbook, Fifth Edition is fully updated and expanded to reflect the latest developments in the field. Written by an expert with unequalled experience and authority, it offers clear guidance on how to create, select, and use the most appropriate algorithms for a specific application. What's new in the Fifth Edition? ·       A new chapter on the human visual process that explains which visual cues elicit a response from the vie

  10. Industrial communication technology handbook

    CERN Document Server

    Zurawski, Richard

    2005-01-01

    The Industrial Communication Technology Handbook focuses on current and newly emerging communication technologies and systems that are evolving in response to the needs of industry and the demands of industry-led consortia and organizations.Organized into two parts, the text first summarizes the basics of data communications and IP networks, then presents a comprehensive overview of the field of industrial communications. This book extensively covers the areas of fieldbus technology, industrial Ethernet and real-time extensions, wireless and mobile technologies in industrial applications, the

  11. Handbook of purified gases

    CERN Document Server

    Schoen, Helmut

    2015-01-01

    Technical gases are used in almost every field of industry, science and medicine and also as a means of control by government authorities and institutions and are regarded as indispensable means of assistance. In this complete handbook of purified gases the physical foundations of purified gases and mixtures as well as their manufacturing, purification, analysis, storage, handling and transport are presented in a comprehensive way. This important reference work is accompanied with a large number of Data Sheets dedicated to the most important purified gases.  

  12. Near field communications handbook

    CERN Document Server

    Ahson, Syed A; Furht, Borko

    2011-01-01

    Near Field Communication, or NFC, is a short-range high frequency wireless communication technology that enables the exchange of data between devices over about a decimeter. The technology is a simple extension of the ISO 14443 proximity-card standard (contact less card, RFID) that combines the interface of a smart card and a reader into a single device with practical implications. A complete reference for NFC, this handbook provides technical information about all aspects of NFC, as well as applications. It covers basic concepts as well as research grade material and includes a discussion of

  13. Handbook of reference electrodes

    CERN Document Server

    Inzelt, György; Scholz, Fritz

    2013-01-01

    Reference Electrodes are a crucial part of any electrochemical system, yet an up-to-date and comprehensive handbook is long overdue. Here, an experienced team of electrochemists provides an in-depth source of information and data for the proper choice and construction of reference electrodes. This includes all kinds of applications such as aqueous and non-aqueous solutions, ionic liquids, glass melts, solid electrolyte systems, and membrane electrodes. Advanced technologies such as miniaturized, conducting-polymer-based, screen-printed or disposable reference electrodes are also covered. Essen

  14. Evaluation of fatigue vessel in the Sta. M Garona NPP : real transients and design transients; Evaluacion de la fatiga en la vasija de CN Santa M de Garona: transitorios reales frente a transitorios de diseno

    Energy Technology Data Exchange (ETDEWEB)

    Martin, J.; Gorrochategui, I.

    2005-07-01

    The number of transient that control the fatigue of its reactor pressure vessel is included in the Sta. M Garona NPP Technical Specifications, being the different transients described in the design specification of the corresponding component. In this work, on the one hand, the description of the design transients with their corresponding real ones is compared and, on the other hand, the number of occurrences and the number of transients originally estimated is also compared. In both cases the influence of the difference between design and reality in the fatigue usage is discussed. (Author)

  15. CRC handbook of modern telecommunications

    CERN Document Server

    Morreale, Patricia A

    2001-01-01

    This authoritative handbook, contributed to by a team of international experts, covers the most dynamic areas in the changing telecommunications landscape. Written for telecommunications specialists who implement the new technologies, The CRC Handbook of Modern Telecommunications is an excellent companion volume to the authors' The Telecommunications Handbook, but stands well on its own, as it extends the range of topics to include voice over Internet, traffic management, quality of service, and other dominant future trends. It is an indispensable reference for all professionals working in the

  16. Handbook of electrical power system dynamics modeling, stability, and control

    CERN Document Server

    Eremia, Mircea

    2013-01-01

    Complete guidance for understanding electrical power system dynamics and blackouts This handbook offers a comprehensive and up-to-date treatment of power system dynamics. Addressing the full range of topics, from the fundamentals to the latest technologies in modeling, stability, and control, Handbook of Electrical Power System Dynamics provides engineers with hands-on guidance for understanding the phenomena leading to blackouts so they can design the most appropriate solutions for a cost-effective and reliable operation. Focusing on system dynamics, the book details

  17. Design of a medical non-linear drilling device: the influence of twist and wear on the fatigue behaviour of NiTi wires subjected to bending rotation

    Energy Technology Data Exchange (ETDEWEB)

    Wagner, M.; Frenzel, J.; Eggeler, G. [Lehrstuhl Werkstoffwissenschaften, Ruhr-Universitaet Bochum, 44780 Bochum (Germany); Richter, J.; Groenemeyer, D. [Institut fuer Mikrotherapie, Universitaet Witten/ Herdecke (Germany)

    2004-05-01

    This paper considers fundamental and experimental aspects associated with the engineering design of a medical, non-linear drilling device which exploits shape memory pseudoelasticity of NiTi wires. For this application it is important that the NiTi wires have a good fatigue resistance. This is why the present authors have previously determined the influence of various parameters on cyclic life, crack growth and stress state of pseudoelastic wires subjected to bending rotation fatigue. The actual drilling device has to withstand twist in addition to bending rotation because the free rotation is constrained by friction between the drill head and the bone material. In addition, friction between the wire and a NiTi guiding tube results in wear and this may well promote fatigue crack nucleation. In this paper, we explain the function of the medical drill. We then report results on the effect of the additional parameters (1) twist and (2) wear on the fatigue life of thin pseudoelastic NiTi wires. We finally discuss the implications of our experimental results for the design process of the medical drilling device. (Abstract Copyright [2004], Wiley Periodicals, Inc.) [German] Dieser Artikel behandelt Voruntersuchungen fuer die Entwicklung eines medizinischen nicht-linearen Bohrsystems. Aus materialwissenschaftlicher Sicht spielt die Ermuedung der mechanischen Komponenten aus NiTi eine wichtige Rolle. Die Autoren haben in bisherigen Studien den Einfluss verschiedener Parameter auf Lebensdauer, Risswachstum und Spannungszustand in pseudoelastischen Draehten waehrend Umlaufbiegung ermittelt. Der Draht im eigentlichen Bohrsystem wird jedoch nicht ausschliesslich durch reine Umlaufbiegung, sondern zusaetzlich durch eine Verdrillung aufgrund der Reibung zwischen Bohrkopf und Knochengewebe, belastet. Ausserdem bewirkt die Reibung zwischen dem Draht und einem Fuehrungsrohr aus NiTi Verschleiss; diese Materialschaedigung stellt einen weiteren Mechanismus zur Risseinleitung dar. In

  18. Low cycle fatigue of irradiated LMFBR materials

    Energy Technology Data Exchange (ETDEWEB)

    Blackburn, L D

    1976-01-01

    A review of low cycle fatigue data on irradiated LMFBR materials was conducted and extensive graphical representations of available data are presented. Representative postirradiation tensile properties of annealed 304 and 316 SS are selected and employed in several predictive methods to estimate irradiated material fatigue curves. Experimental fatigue data confirm the use of predictive methods for establishing conservative design curves over the range of service conditions relevant to such CRBRP components as core former, fixed radial shielding, core barrel, lower inlet module and upper internals structures. New experimental data on fatigue curves and creep-fatigue interaction in irradiated 20 percent cold worked (CW) 316 SS and Alloy 718 would support the design of removable radial shielding and upper internals in CRBRP. New experimental information on notched fatigue behavior and cyclic stress-strain curves of all these materials in the irradiated condition could provide significant design data.

  19. Cumulative fatigue damage models

    Science.gov (United States)

    Mcgaw, Michael A.

    1988-01-01

    The problem of calculating expected component life under fatigue loading conditions is complicated by the fact that component loading histories contain, in many cases, cyclic loads of widely varying amplitudes. In such a case a cumulative damage model is required, in addition to a fatigue damage criterion, or life relationship, in order to compute the expected fatigue life. The traditional cumulative damage model used in design is the linear damage rule. This model, while being simple to use, can yield grossly unconservative results under certain loading conditions. Research at the NASA Lewis Research Center has led to the development of a nonlinear cumulative damage model, named the double damage curve approach (DDCA), that has greatly improved predictive capability. This model, which considers the life (or loading) level dependence of damage evolution, was applied successfully to two polycrystalline materials, 316 stainless steel and Haynes 188. The cumulative fatigue behavior of the PWA 1480 single-crystal material is currently being measured to determine the applicability of the DDCA for this material.

  20. Fatigue of Dental Implants: Facts and Fallacies

    Directory of Open Access Journals (Sweden)

    Keren Shemtov-Yona

    2016-05-01

    Full Text Available Dental implants experience rare yet problematic mechanical failures such as fracture that are caused, most often, by (time-dependent metal fatigue. This paper surveys basic evidence about fatigue failure, its identification and the implant’s fatigue performance during service. We first discuss the concept of dental implant fatigue, starting with a review of basic concepts related to this failure mechanism. The identification of fatigue failures using scanning electron microscopy follows, to show that this stage is fairly well defined. We reiterate that fatigue failure is related to the implant design and its surface condition, together with the widely varying service conditions. The latter are shown to vary to an extent that precludes devising average or representative conditions. The statistical nature of the fatigue test results is emphasized throughout the survey to illustrate the complexity in evaluating the fatigue behavior of dental implants from a design perspective. Today’s fatigue testing of dental implants is limited to ISO 14801 standard requirements, which ensures certification but does not provide any insight for design purposes due to its limited requirements. We introduce and discuss the random spectrum loading procedure as an alternative to evaluate the implant’s performance under more realistic conditions. The concept is illustrated by random fatigue testing in 0.9% saline solution.

  1. Optimization design of joint under fatigue life%疲劳寿命下连接件的优化设计

    Institute of Scientific and Technical Information of China (English)

    姜昊; 姜金辉; 沈雨晨

    2015-01-01

    连接件是飞机结构中常见的承载结构,但也是常见的疲劳源,连接件上紧固件钉传载荷和孔边旁路载荷直接影响疲劳寿命,采用bush元、beam元和rbar模拟紧固件和板的连接关系,建立了连接件细节有限元模型。为降低端部孔的应力集中,使连接板的厚度呈台阶形状,计算紧固件载荷的分布,然后通过应力严重系数法,确定各个连接件结构的严重孔,最后对各个严重孔的疲劳寿命进行了对比,计算结果表明与理论相符,对结构的优化设计具有参考价值。%The joint is the common bearing structure in the aircraft ,but it’s also a common source of fatigue .The pin load on the fasteners and the bypass load on the side of hole directly affect the fatigue life .The fasteners and plate con‐nection relationship simulated by the bush element ,beam element and rbar element in the article .Established the joint detail finite element model .thickness of connecting plate shape steps ,Which can reduce the stress concentration of the end hole .And calculate the load distribution .Then determine the serious hole in the various joints ,by Stress Severity Factor approach .Finally the fatigue life of various serious holes were compared ,the calculation results show that accords with the theory ,the optimization of structure design has reference value .

  2. Developer's handbook of interactive multimedia

    CERN Document Server

    Phillips, Robin

    2014-01-01

    New technology is being used more and more in education and providers have to be aware of what is on offer and how it can be used. This practical handbook demonstrates how interactive multimedia can be developed for educational application.

  3. Hanford Facility RCRA permit handbook

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Purpose of this Hanford Facility (HF) RCRA Permit Handbook is to provide, in one document, information to be used for clarification of permit conditions and guidance for implementing the HF RCRA Permit.

  4. Urban Farm Business Plan Handbook

    Science.gov (United States)

    The Urban Farm Business Plan Handbook (this document) provides guidance for developing a business plan for the startup and operation of an urban farm. It focuses on food and non-food related cultivated agriculture.

  5. Wind energy a reference handbook

    CERN Document Server

    Newton, PhD, David E

    2014-01-01

    While covering the fascinating history of wind power as a whole, this timely handbook focuses on current technological developments and the promise--and pitfalls--of wind energy as part of the world's energy future.

  6. Springer handbook of mechanical engineering

    Energy Technology Data Exchange (ETDEWEB)

    Grote, Karl-Heinrich [Magdeburg Univ. (Germany). Dept. of Mechanical Engineering; Antonsson, Erik K. (eds.) [California Inst. of Technology (CALTEC), Pasadena, CA (United States). Dept. of Mechanical Engineering

    2009-07-01

    Mechanical Engineering is a professional engineering discipline which involves the application of principles of physics, design, manufacturing and maintenance of mechanical systems. It requires a solid understanding of the key concepts including mechanics, kinematics, thermodynamics and energy. Mechanical engineers use these principles and others in the design and analysis of automobiles, aircrafts, heating and cooling systems, industrial equipment and machinery. In addition to these main areas, specialized fields are necessary to prepare future engineers for their positions in industry, such as mechatronics and robotics, transportation and logistics, fuel technology, automotive engineering, biomechanics, vibration, optics and others. Accordingly, the Springer Handbook of Mechanical Engineering devotes its contents to all areas of interest for the practicing engineer as well as for the student at various levels and educational institutions. Authors from all over the world have contributed with their expertise and support the globally working engineer in finding a solution for today's mechanical engineering problems. Each subject is discussed in detail and supported by numerous figures and tables. DIN standards are retained throughout and ISO equivalents are given where possible. The text offers a concise but detailed and authoritative treatment of the topics with full references. (orig.)

  7. How to Get More Out of Your Newspaper; Student Handbook.

    Science.gov (United States)

    Ohio Newspaper Association, Columbus.

    This handbook is designed to help students develop a better understanding and appreciation of the newspaper, its uses by the general public, and its role in the democratic system. Contents include: "The History of Newspapers"; "Why Should You Read a Newspaper?"; "What Do You Read in a Newspaper?"; "How Well Do You Read?" which stresses reading…

  8. Wisconsin Library Building Project Handbook. Second Revised Edition.

    Science.gov (United States)

    Holt, Raymond M.; Dahlgren, Anders C.

    Developed for use in library building projects--whether they involve remodeling, expanding, or erecting a new structure--this handbook discusses the roles of the library administrator, the board, the librarian, the architect, the library building consultant, the interior designer, the building contractor, and others. It also addresses the major…

  9. Area Handbook for the People's Republic of China.

    Science.gov (United States)

    Whitaker, Donald P.; Shinn, Rinn-Sup

    This volume on the People's Republic of China is one of a series of handbooks prepared by the Foreign Area Studies (FAS) of the American University, designed to be useful to military and other personnel who need a convenient compilation of basic facts about the social, economic, political, and military institutions and practices of various…

  10. Climate change handbook for North-Eastern South Africa

    CSIR Research Space (South Africa)

    Davis, C

    2010-04-01

    Full Text Available In many countries, decision-makers are seeking information from a wide range of disciplines on the potential impacts of climate change on environmental and socio-economic systems. This handbook is designed to present future climate change scenarios...

  11. Training Program Handbook: A systematic approach to training

    Energy Technology Data Exchange (ETDEWEB)

    1994-08-01

    This DOE handbook describes a systematic method for establishing and maintaining training programs that meet the requirements and expectations of DOE Orders 5480.18B and 5480.20. The systematic approach to training includes 5 phases: Analysis, design, development, implementation, and evaluation.

  12. Community biomass handbook. Volume I: thermal wood energy

    Science.gov (United States)

    D. Becker; E. Lowell; D. Bihn; R. Anderson; S. Taff

    2014-01-01

    This handbook and financial app is a guide to help communities quickly determine if biomass energy projects might work for them so that this option is not overlooked. Its purpose is as a screening tool designed to save significant time, resources, and investment by weeding out those wood energy projects that may never come to fruition from those that have a chance of...

  13. Electronic Warfare and Radar Systems Engineering Handbook. 4th Edition

    Science.gov (United States)

    2013-10-01

    DISTRIBUTION/AVAILABILITY STATEMENT Approved for public release. 13. SUPPLEMENTARY NOTES None. 14 . ABSTRACT (U) This handbook is designed to aid...etc. excluding WRAs) ALC Air Logistics Center AM Amplitude Modulation AMD Aircraft Maintenance Department AMES Advanced Multiple Environment...VDC Volts Direct Current VDT Video Display Terminal VECP Value Engineering Change Proposal VF Prefix for Navy fighter squadron VFO Variable

  14. Towards a unified fatigue life prediction method for marine structures

    CERN Document Server

    Cui, Weicheng; Wang, Fang

    2014-01-01

    In order to apply the damage tolerance design philosophy to design marine structures, accurate prediction of fatigue crack growth under service conditions is required. Now, more and more people have realized that only a fatigue life prediction method based on fatigue crack propagation (FCP) theory has the potential to explain various fatigue phenomena observed. In this book, the issues leading towards the development of a unified fatigue life prediction (UFLP) method based on FCP theory are addressed. Based on the philosophy of the UFLP method, the current inconsistency between fatigue design and inspection of marine structures could be resolved. This book presents the state-of-the-art and recent advances, including those by the authors, in fatigue studies. It is designed to lead the future directions and to provide a useful tool in many practical applications. It is intended to address to engineers, naval architects, research staff, professionals and graduates engaged in fatigue prevention design and survey ...

  15. Corrosion Fatigue

    Science.gov (United States)

    1981-10-01

    the applied protection systems, (2) crevices for moisture entrapment, (3) galvanic couples when steel or titanium fasteners are used, and (4) fatigue...Activ Material Structure Exposed Normal Environment* Unexposed Atmosphere Aluminum alloys Steel 1.25 2.0 4.0 Titanium " Magnesium " (4.0) (8.0) (10.0...APPRNDIX - Chromic Acid Anodizing The surface treatment consists in the following process : D egreasing with trichlorethylene vapor, * Pickling , Composition

  16. A Handbook for Strategic Planning

    Science.gov (United States)

    1994-01-01

    This handbook was written for Department of the Navy (DON) commanding officers, TQL coordinators, and strategic planning facilitators in response to...questions about the strategic planning process and how it should be conducted within the DON. It is not intended to teach the intricacies of strategic ... planning , but is provided to answer process questions. While every question cannot be anticipated, the handbook details one way to do strategic

  17. The handbook of artificial intelligence

    CERN Document Server

    Barr, Avron J

    1981-01-01

    The Handbook of Artificial Intelligence, Volume I focuses on the progress in artificial intelligence (AI) and its increasing applications, including parsing, grammars, and search methods.The book first elaborates on AI, AI handbook and literature, problem representation, search methods, and sample search programs. The text then ponders on representation of knowledge, including survey of representation techniques and representation schemes. The manuscript explores understanding natural languages, as well as machine translation, grammars, parsing, test generation, and natural language processing

  18. Revising Academic Library Governance Handbooks

    Directory of Open Access Journals (Sweden)

    Jen Stevens

    2015-07-01

    Full Text Available Original Image by Flickr user Sasquatch 1 (CC BY 2.0, with minimal modification by C. Strunk (10 June 2015. In Brief Regardless of our status (tenure track, non-tenure track, staff, and/or union, academic librarians at colleges and universities may use a handbook or similar document as a framework for self-governance. These handbooks typically cover rank […

  19. Effectiveness of a minimal psychological intervention to reduce mild to moderate depression and chronic fatigue in a working population: the design of a randomized controlled trial

    Directory of Open Access Journals (Sweden)

    Aelfers Ed

    2013-02-01

    Full Text Available Abstract Background In a working population, common mental complaints like depressed mood and chronic fatigue are highly prevalent and often result in further deterioration of mental health and consequently absence from work. In a large occupational health setting, we will evaluate the (cost- effectiveness of a Minimal Psychological Intervention (MPI, in reducing symptoms of depression and chronic fatigue in a working population. The MPI is also evaluated regarding its appreciation by worker, nurse, and occupational health physician (process evaluation. The tailor-made intervention is administered by nurses, who are trained in the principles of cognitive behavioural therapy and self-management. Methods/design The presented WoPaCoM study (Work Participation of Workers with Common Mental complaints is a two-armed randomized controlled trial, comparing MPI with usual care. A total number of 124 workers suffering from (chronic mental fatigue or mild to moderate depression will be included. A stratified and block randomization will be applied, stratifying by customer organisation, income, and gender, using a block size of four. It will include a baseline measurement and subsequently follow up measurements after 4, 6 and 12 months. The primary outcome measures are symptoms of either fatigue (using the Checklist Individual Strength and/or depression (using the Beck Depression Inventory and secondary outcome measures include sickness absence, self efficacy, costs and quality of life. Analysis will include both univariate and multivariate techniques and data will be analysed according to the intention to treat principle. Discussion Patient recruitment in an occupational setting proves to be complicated and time consuming. Shift work for instance proved to be an obstacle for making appointments for consultation with the nurse. Furthermore, economic developments might have created job insecurity which negatively influenced participation in the study, with

  20. EURANOS. The Handbook Users Group (HUG)

    DEFF Research Database (Denmark)

    Nisbet, A.F.; Andersson, Kasper Grann; Carlé, B.;

    the demonstrations were discussed with the HUG steering group who then made recommendations to the handbook developers on how the handbooks could be improved in the future. Updates have been made and version 2 of the generic handbooks will be published in 2009. In the future, it is likely that the HUG will join......Three handbooks to assist in the management of contaminated food production systems, inhabited areas and drinking water supplies have been developed in conjunction with a wide range of stakeholders in Europe. These handbooks are living documents that will require updating from time to time...... to remain state-of-the-art. To address this need, a handbook users’ group (HUG) was established in 2007 to provide a platform for maintaining the handbooks and to build a network of users for both the generic handbooks and any subsequently customised versions. A web site was set up (www...

  1. How To Develop Survey Protocols: A Handbook

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This handbook provides a standard and guidance for developing and reviewing survey protocols used in the National Wildlife Refuge System. In the handbook, survey...

  2. Power electronics handbook components, circuits and applications

    CERN Document Server

    Mazda, F F

    2013-01-01

    Power Electronics Handbook: Components, Circuits, and Applications is a collection of materials about power components, circuit design, and applications. Presented in a practical form, theoretical information is given as formulae. The book is divided into three parts. Part 1 deals with the usual components found in power electronics such as semiconductor devices and power semiconductor control components, their electronic compatibility, and protection. Part 2 tackles parts and principles related to circuits such as switches; link frequency chargers; converters; and AC line control, and Part 3

  3. The medical device R&D handbook

    CERN Document Server

    Kucklick, Theodore R

    2012-01-01

    Exploring the practical, entrepreneurial, and historical aspects of medical device development, this second edition of The Medical Device R&D Handbook provides a how-to guide for medical device product development. The book offers knowledge of practical skills such as prototyping, plastics selection, and catheter construction, allowing designers to apply these specialized techniques for greater innovation and time saving. The author discusses the historical background of various technologies, helping readers understand how and why certain devices were developed. The text also contains intervie

  4. Handbook of accelerator physics and engineering

    CERN Document Server

    Mess, Karl Hubert; Tigner, Maury; Zimmermann, Frank

    2013-01-01

    Edited by internationally recognized authorities in the field, this expanded and updated new edition of the bestselling Handbook, containing more than 100 new articles, is aimed at the design and operation of modern particle accelerators. It is intended as a vade mecum for professional engineers and physicists engaged in these subjects. With a collection of more than 2000 equations, 300 illustrations and 500 graphs and tables, here one will find, in addition to the common formulae of previous compilations, hard-to-find, specialized formulae, recipes and material data pooled from the lifetime experience of many of the world's most able practitioners of the art and science of accelerators.

  5. Mechanical engineers' handbook, energy and power

    CERN Document Server

    Kutz, Myer

    2015-01-01

    The engineer's ready reference for mechanical power and heat Mechanical Engineer's Handbook provides the mostcomprehensive coverage of the entire discipline, with a focus onexplanation and analysis. Packaged as a modular approach, thesebooks are designed to be used either individually or as a set,providing engineers with a thorough, detailed, ready reference ontopics that may fall outside their scope of expertise. Each bookprovides discussion and examples as opposed to straight data andcalculations, giving readers the immediate background they needwhile pointing them toward more in-depth infor

  6. Handbook of fiber optics theory and applications

    CERN Document Server

    Yeh, Chai

    2013-01-01

    Dr. Yeh supplies a firm theoretical foundation in such topics as propagation of light through fibers, fiber fabrication, loss mechanisms, and dispersion properties. He then expands from this into such practical areas as fiber splicing, measuring loss in fibers, fiber-based communications networks, remote fiber sensors, and integrated optics. Whether involved in fiber optics research, design, or practical implementation of systems, this handbook will be extremely useful.Key Features* Here is a comprehensive, ""one-stop"" reference with state-of-the-art information on fiber optics Included is da

  7. Power electronics handbook components, circuits and applications

    CERN Document Server

    Mazda, F F

    1993-01-01

    Power Electronics Handbook: Components, Circuits, and Applications is a collection of materials about power components, circuit design, and applications. Presented in a practical form, theoretical information is given as formulae. The book is divided into three parts. Part 1 deals with the usual components found in power electronics such as semiconductor devices and power semiconductor control components, their electronic compatibility, and protection. Part 2 tackles parts and principles related to circuits such as switches; link frequency chargers; converters; and AC line control, and Part 3

  8. FCRD Advanced Reactor (Transmutation) Fuels Handbook

    Energy Technology Data Exchange (ETDEWEB)

    Janney, Dawn Elizabeth [Idaho National Lab. (INL), Idaho Falls, ID (United States); Papesch, Cynthia Ann [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-09-01

    alloys of two or three of these elements. It contains information about phase diagrams and related information (including phases and phase transformations); heat capacity, entropy, and enthalpy; thermal expansion; and thermal conductivity and diffusivity. In addition to presenting information about materials properties, the handbook attempts to provide information about how well the property is known and how much variation exists between measurements. Although it includes some results from models, its primary focus is experimental data. The Handbook is organized in two sections: one with information about the U-Pu-Zr ternary and one with information about other elements and binary and vi ternary alloys in the U-Np-Pu-Am-La-Ce-Pr-Nd-Zr system. Within each section, information about elements is presented first, followed by information about binary alloys, then information about ternary alloys. The order in which the elements in each alloy are mentioned follows the order in the first sentence of this paragraph. Much of the information on the U-Pu-Zr system repeats information from the FCRD Transmutation Fuels Handbook 2015. Most of the other data has been published elsewhere (although scattered throughout numerous references, some quite obscure); however, some data from Idaho National Laboratory is presented here for the first time. As the FCRD programmatic mission evolves, future editions of this handbook will begin to include other advanced reactor fuel designs and compositions. Hence, the title of the handbook will transition to the Advanced Reactor Fuels Handbook.

  9. 涡轮轴疲劳试验台系统设计%Design for Fatigue Test Bench System of Turbo-shaft

    Institute of Scientific and Technical Information of China (English)

    陈曼龙

    2013-01-01

    In order to accomplish the turbo shaft fatigue test under combined load,the turbo-shaft fatigue test bench was designed with combination of computer,machinery,electric and hydraulic technology.The process of applying torque and bending moment load synchronously was realized efficiently by the test system through extracting signal from banding moment and adopting electro-hydraulic servo valve.The computer measurement and control system can be adopted to accomplish various cyclic loading schemes or adjusting the load exerted on shaft expediently in test.%为了实现涡轮轴在综合载荷作用下疲劳强度的试验,采用机、电、液、计算机技术相结合的方法设计了涡轮轴疲劳试验台.该试验系统通过信号提取和采用电液伺服阀有效实现了扭矩载荷与弯矩载荷同步加载过程,利用计算机测控系统能够方便地实现测试过程中多种循环加载方式以及加载载荷大小的调整.

  10. Handbook of reflector antennas and feed systems v.3 applications of reflectors

    CERN Document Server

    Rao, Sudhakar; Sharma, Satish K

    2013-01-01

    This is the first truly comprehensive and most up-to-date handbook available on modern reflector antennas and feed sources for diversified space and ground applications. There has never been such an all-encompassing reflector handbook in print, and no currently available title offers coverage of such recent research developments. The Handbook consists of three volumes. Volume III focuses on the range of reflector antenna applications, including space, terrestrial, and radar. The intent of this book volume is to provide practical applications and design information on reflector antennas used fo

  11. Engineering Design Handbook. Breech Mechanism Design

    Science.gov (United States)

    1979-02-01

    Ref. 93) and MIL-S- described in par. 2-21 and a sample analysis of a 500, Steel, Chrome- Nickel -Molybdenum, Bars and threaded connection is...Ordnance, (November-December 1971). Arsenal, Watervliet, NY, 1971. 3-47 I DANCOM-P 0ඇI b - *FEIRENCZS (coutd) 29. E. B. Haugen and D. H. Mutti

  12. IEA Joint Action. Wind turbine fatigue

    Energy Technology Data Exchange (ETDEWEB)

    Maribo Pedersen, B. [ed.

    1996-09-01

    Fatigue research on wind turbine blade material has been an important issue over the years in many countries and in the E.U. As a result of the effort the knowledge on fatigue properties of fibre reinforced materials has been expanded enormously. Practical fatigue design properties are available for constant amplitude tests at ambient temperatures. A lack of knowledge can be shown in several other fields, such as variable amplitude and multi-axial testing and the influence of the environment and carbon fibres. Fatigue is seen as dominant for the blade design, improvements in both the load prediction and material fatigue properties should be strove for. In discussions with blade manufacturers and subsidy agencies (E.U. DGXII, NOVEM, ETSU, etc.) on the importance of continuous materials fatigue research the improvement in reliability should be stressed. (au)

  13. Fatigue reliability for LNG carrier

    Institute of Scientific and Technical Information of China (English)

    Xiao Taoyun; Zhang Qin; Jin Wulei; Xu Shuai

    2011-01-01

    The procedure of reliability-based fatigue analysis of liquefied natural gas (LNG) carrier of membrane type under wave loads is presented. The stress responses of the hotspots in regular waves with different wave heading angles and wave lengths are evaluated by global ship finite element method (FEM). Based on the probabilistic distribution function of hotspots' short-term stress-range using spectral-based analysis, Weibull distribution is adopted and discussed for fitting the long-term probabilistic distribution of stress-range. Based on linear cumulative damage theory, fatigue damage is characterized by an S-N relationship, and limit state function is established. Structural fatigue damage behavior of several typical hotspots of LNG middle ship section is clarified and reliability analysis is performed. It is believed that the presented results and conclusions can be of use in calibration for practical design and initial fatigue safety evaluation for membrane type LNG carrier.

  14. 20 CFR 638.501 - Student handbook.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Student handbook. 638.501 Section 638.501... TITLE IV-B OF THE JOB TRAINING PARTNERSHIP ACT Center Operations § 638.501 Student handbook. Each center operator shall develop a student handbook which provides essential information to students for distribution...

  15. Instrumentation Hardware Abstraction Language (IHAL) Handbook

    Science.gov (United States)

    2017-01-01

    Telemetry Group DOCUMENT 128-17 INSTRUMENTATION HARDWARE ABSTRACTION LANGUAGE (IHAL) HANDBOOK DISTRIBUTION A...intentionally left blank DOCUMENT 128-17 INSTRUMENTATION HARDWARE ABSTRACTION LANGUAGE (IHAL) HANDBOOK January 2017...5100 This page intentionally left blank. Instrumentation Hardware Abstract Language (IHAL) Handbook, RCC Document 128-17, January 2017 iii

  16. Handbook of radioactivity analysis

    CERN Document Server

    2012-01-01

    The updated and much expanded Third Edition of the "Handbook of Radioactivity Analysis" is an authoritative reference providing the principles, practical techniques, and procedures for the accurate measurement of radioactivity from the very low levels encountered in the environment to higher levels measured in radioisotope research, clinical laboratories, biological sciences, radionuclide standardization, nuclear medicine, nuclear power, fuel cycle facilities and in the implementation of nuclear forensic analysis and nuclear safeguards. The Third Edition contains seven new chapters providing a reference text much broader in scope than the previous Second Edition, and all of the other chapters have been updated and expanded many with new authors. The book describes the basic principles of radiation detection and measurement, the preparation of samples from a wide variety of matrices, assists the investigator or technician in the selection and use of appropriate radiation detectors, and presents state-of-the-ar...

  17. Handbook of Memetic Algorithms

    CERN Document Server

    Cotta, Carlos; Moscato, Pablo

    2012-01-01

    Memetic Algorithms (MAs) are computational intelligence structures combining multiple and various operators in order to address optimization problems.  The combination and interaction amongst operators evolves and promotes the diffusion of the most successful units and generates an algorithmic behavior which can handle complex objective functions and hard fitness landscapes.   “Handbook of Memetic Algorithms” organizes, in a structured way, all the the most important results in the field of MAs since their earliest definition until now.  A broad review including various algorithmic solutions as well as successful applications is included in this book. Each class of optimization problems, such as constrained optimization, multi-objective optimization, continuous vs combinatorial problems, uncertainties, are analysed separately and, for each problem,  memetic recipes for tackling the difficulties are given with some successful examples. Although this book contains chapters written by multiple authors, ...

  18. Handbook of geomathematics

    CERN Document Server

    Nashed, M; Sonar, Thomas

    2015-01-01

    During the last three decades geosciences and geo-engineering were influenced by two essential scenarios: First, the technological progress has changed completely the observational and measurement techniques. Modern high speed computers and satellite based techniques are entering more and more all geodisciplines. Second, there is a growing public concern about the future of our planet, its climate, its environment and about an expected shortage of natural resources. Obviously, both aspects, viz. efficient strategies of protection against threats of a changing Earth and the exceptional situation of getting terrestrial, airborne as well as space borne data of better and better quality explain the strong need of new mathematical structures, tools and methods. Mathematics concerned with geoscientific problems, i.e., Geomathematics, is becoming increasingly important. The ‘Handbook of Geomathematics’ deals with the qualitative and quantitative properties for the current and possible structures of the system Ea...

  19. Handbook of simulation optimization

    CERN Document Server

    Fu, Michael C

    2014-01-01

    The Handbook of Simulation Optimization presents an overview of the state of the art of simulation optimization, providing a survey of the most well-established approaches for optimizing stochastic simulation models and a sampling of recent research advances in theory and methodology. Leading contributors cover such topics as discrete optimization via simulation, ranking and selection, efficient simulation budget allocation, random search methods, response surface methodology, stochastic gradient estimation, stochastic approximation, sample average approximation, stochastic constraints, variance reduction techniques, model-based stochastic search methods and Markov decision processes. This single volume should serve as a reference for those already in the field and as a means for those new to the field for understanding and applying the main approaches. The intended audience includes researchers, practitioners and graduate students in the business/engineering fields of operations research, management science,...

  20. Machine Vision Handbook

    CERN Document Server

    2012-01-01

    The automation of visual inspection is becoming more and more important in modern industry as a consistent, reliable means of judging the quality of raw materials and manufactured goods . The Machine Vision Handbook  equips the reader with the practical details required to engineer integrated mechanical-optical-electronic-software systems. Machine vision is first set in the context of basic information on light, natural vision, colour sensing and optics. The physical apparatus required for mechanized image capture – lenses, cameras, scanners and light sources – are discussed followed by detailed treatment of various image-processing methods including an introduction to the QT image processing system. QT is unique to this book, and provides an example of a practical machine vision system along with extensive libraries of useful commands, functions and images which can be implemented by the reader. The main text of the book is completed by studies of a wide variety of applications of machine vision in insp...

  1. Handbook for Language Detectives

    DEFF Research Database (Denmark)

    Bryanne, Ulla; Bruntt, Karen Scheel Lassen

    Handbook for Language Detectives gives a thorough presentation of English grammar and discusses how to teach grammar. The book unveils to the readers, who will be working as grammar detectives, the fascinating world of language. It does not only deal with "traditional grammar" but also discusses...... what different grammatical structures mean (semantics) and how they influence the level of style (pragmatics). Grammar should not be taught as a separate discipline; it can and should be integrated in communicative language teaching. The book gives you innovative and valuable ideas of how this can...... be done. The book serves a double purpose: - English grammar and language usage at bachelor level from a functional linguistic point of view. - How to teach English grammar within a communicative approach. The book is mainly intended for Danish student teachers of English, but anyone else interested...

  2. Handbook on loss reserving

    CERN Document Server

    Schmidt, Klaus; Schnaus, Anja

    2016-01-01

    This handbook presents the basic aspects of actuarial loss reserving. Besides the traditional methods, it also includes a description of more recent ones and a discussion of certain problems occurring in actuarial practice, like inflation, scarce data, large claims, slow loss development, the use of market statistics, the need for simulation techniques and the task of calculating best estimates and ranges of future losses. In property and casualty insurance the provisions for payment obligations from losses that have occurred but have not yet been settled usually constitute the largest item on the liabilities side of an insurer's balance sheet. For this reason, the determination and evaluation of these loss reserves is of considerable economic importance for every property and casualty insurer. Actuarial students, academics as well as practicing actuaries will benefit from this overview of the most important actuarial methods of loss reserving by developing an understanding of the underlying stochastic models...

  3. Handbook of mathematics

    CERN Document Server

    Bronshtein, I N; Musiol, Gerhard; Mühlig, Heiner

    2015-01-01

    This guide book to mathematics contains in handbook form the fundamental working knowledge of mathematics which is needed as an everyday guide for working scientists and engineers, as well as for students. Easy to understand, and convenient to use, this guide book gives concisely the information necessary to evaluate most problems which occur in concrete applications. In the newer editions emphasis was laid on those fields of mathematics that became more important for the formulation and modeling of technical and natural processes, namely Numerical Mathematics, Probability Theory and Statistics, as well as Information Processing. Besides many enhancements and  new paragraphs,  new sections on Geometric and Coordinate Transformations, Quaternions and Applications, and Lie Groups and Lie Algebras were added for the sixth edition.

  4. Solar cell radiation handbook

    Science.gov (United States)

    Tada, H. Y.; Carter, J. R., Jr.; Anspaugh, B. E.; Downing, R. G.

    1982-01-01

    The handbook to predict the degradation of solar cell electrical performance in any given space radiation environment is presented. Solar cell theory, cell manufacturing and how they are modeled mathematically are described. The interaction of energetic charged particles radiation with solar cells is discussed and the concept of 1 MeV equivalent electron fluence is introduced. The space radiation environment is described and methods of calculating equivalent fluences for the space environment are developed. A computer program was written to perform the equivalent fluence calculations and a FORTRAN listing of the program is included. Data detailing the degradation of solar cell electrical parameters as a function of 1 MeV electron fluence are presented.

  5. Welding processes handbook

    CERN Document Server

    Weman, Klas

    2011-01-01

    Offers an introduction to the range of available welding technologies. This title includes chapters on individual techniques that cover principles, equipment, consumables and key quality issues. It includes material on such topics as the basics of electricity in welding, arc physics, and distortion, and the weldability of particular metals.$bThe first edition of Welding processes handbook established itself as a standard introduction and guide to the main welding technologies and their applications. This new edition has been substantially revised and extended to reflect the latest developments. After an initial introduction, the book first reviews gas welding before discussing the fundamentals of arc welding, including arc physics and power sources. It then discusses the range of arc welding techniques including TIG, plasma, MIG/MAG, MMA and submerged arc welding. Further chapters cover a range of other important welding technologies such as resistance and laser welding, as well as the use of welding techniqu...

  6. The photomultiplier handbook

    CERN Document Server

    Wright, A G

    2017-01-01

    Photomultipliers are extremely sensitive light detectors that can detect single photons. In multiplying the charge produced by incident light by up to 100 million times, these devices are essential to a wide range of functions, from medical instrumentation to astronomical observations. This complete and authoritative guide will provide students, practitioners, and researchers with a deeper understanding of the operating principles of these devices. Authored by an experienced user and manufacturer of photomultipliers, this handbook gives the reader insights into photomultiplier behaviour as a means to optimize performance. Diffuse and low level light sources are best served with a photomultiplier for the detection of single photon emissions. Light detection and electron multiplication are statistical in nature and the mathematics of these processes is derived from first principles. The book covers other related topics such as scintillation counting, light guides, and large area detectors. The usually complicat...

  7. Handbook of Intelligent Vehicles

    CERN Document Server

    2012-01-01

    The Handbook of Intelligent Vehicles provides a complete coverage of the fundamentals, new technologies, and sub-areas essential to the development of intelligent vehicles; it also includes advances made to date, challenges, and future trends. Significant strides in the field have been made to date; however, so far there has been no single book or volume which captures these advances in a comprehensive format, addressing all essential components and subspecialties of intelligent vehicles, as this book does. Since the intended users are engineering practitioners, as well as researchers and graduate students, the book chapters do not only cover fundamentals, methods, and algorithms but also include how software/hardware are implemented, and demonstrate the advances along with their present challenges. Research at both component and systems levels are required to advance the functionality of intelligent vehicles. This volume covers both of these aspects in addition to the fundamentals listed above.

  8. [Research Progress on the Interaction Effects and Its Neural Mechanisms between Physical Fatigue and Mental Fatigue].

    Science.gov (United States)

    Zhang, Lixin; Zhang, Chuncui; He, Feng; Zhao, Xin; Qi, Hongzhi; Wan, Baikun; Ming, Dong

    2015-10-01

    Fatigue is an exhaustion state caused by prolonged physical work and mental work, which can reduce working efficiency and even cause industrial accidents. Fatigue is a complex concept involving both physiological and psychological factors. Fatigue can cause a decline of concentration and work performance and induce chronic diseases. Prolonged fatigue may endanger life safety. In most of the scenarios, physical and mental workloads co-lead operator into fatigue state. Thus, it is very important to study the interaction influence and its neural mechanisms between physical and mental fatigues. This paper introduces recent progresses on the interaction effects and discusses some research challenges and future development directions. It is believed that mutual influence between physical fatigue and mental fatigue may occur in the central nervous system. Revealing the basal ganglia function and dopamine release may be important to explore the neural mechanisms between physical fatigue and mental fatigue. Future effort is to optimize fatigue models, to evaluate parameters and to explore the neural mechanisms so as to provide scientific basis and theoretical guidance for complex task designs and fatigue monitoring.

  9. Fatigue damage mechanisms in polymer matrix composites

    OpenAIRE

    1997-01-01

    Polymer matrix composites are finding increased use in structural applications, in particular for aerospace and automotive purposes. Mechanical fatigue is the most common type of failure of structures in service. The relative importance of fatigue has yet to be reflected in design where static conditions still prevail. The fatigue behavior of composite materials is conventionally characterized by a Wöhler or S-N curve. For every new material with a new lay-up, altered constituents or differen...

  10. NASA Schedule Management Handbook

    Science.gov (United States)

    2011-01-01

    The purpose of schedule management is to provide the framework for time-phasing, resource planning, coordination, and communicating the necessary tasks within a work effort. The intent is to improve schedule management by providing recommended concepts, processes, and techniques used within the Agency and private industry. The intended function of this handbook is two-fold: first, to provide guidance for meeting the scheduling requirements contained in NPR 7120.5, NASA Space Flight Program and Project Management Requirements, NPR 7120.7, NASA Information Technology and Institutional Infrastructure Program and Project Requirements, NPR 7120.8, NASA Research and Technology Program and Project Management Requirements, and NPD 1000.5, Policy for NASA Acquisition. The second function is to describe the schedule management approach and the recommended best practices for carrying out this project control function. With regards to the above project management requirements documents, it should be noted that those space flight projects previously established and approved under the guidance of prior versions of NPR 7120.5 will continue to comply with those requirements until project completion has been achieved. This handbook will be updated as needed, to enhance efficient and effective schedule management across the Agency. It is acknowledged that most, if not all, external organizations participating in NASA programs/projects will have their own internal schedule management documents. Issues that arise from conflicting schedule guidance will be resolved on a case by case basis as contracts and partnering relationships are established. It is also acknowledged and understood that all projects are not the same and may require different levels of schedule visibility, scrutiny and control. Project type, value, and complexity are factors that typically dictate which schedule management practices should be employed.

  11. CORROSION FATIGUE OF NUCLEAR-GRADE STAINLESS STEEL IN HIGH TEMPERATURE WATER AND ITS ENVIRONMENTAL FATIGUE DESIGN MODEL%核级不锈钢高温水腐蚀疲劳机制及环境疲劳设计模型

    Institute of Scientific and Technical Information of China (English)

    吴欣强; 徐松; 韩恩厚; 柯伟

    2011-01-01

    通过模拟核电高温高压循环水腐蚀疲劳实验,研究了国产核级不锈钢的环境疲劳损伤行为与失效机制;评价了影响不锈钢高温高压水疲劳寿命的环境和载荷等因素,建立了一个植入环境损伤效应的疲劳设计模型,给出了便于工程应用的核级不锈钢的环境疲劳设计曲线.%The high safety of light water reactor nuclear power plants (NPPs) requires very strict design standard and service property of pressure boundary components materials. The service degradation and life assessment of the components materials primarily depend on the understanding of environmentally assisted failure mechanism, accumulation of service property data and construction of evaluation models. Currently domestic NPPs are relying on foreign design, operation and life assessment standards. However, recent experimental data indicate that even the ASME design fatigue code may be deficient in safety margin under certain conditions of loading and environment. In the present work, based on the corrosion fatigue tests in simulated NPPs' high temperature pressurized water, the corrosion fatigue behavior and environmentally assisted failure mechanism of domestic nuclear-grade stainless steel have been investigated. The factors affecting fatigue life of nuclear grade stainless steel in high temperature water were evaluated. A design fatigue model was constructed by taking environmental degradation effects into account and the corresponding design curves were given for the convenience of engineering applications.

  12. MANAGING FATIGUE IN SPORTS

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    @@ Fatigue is a multifactorial process. Depletion of energy sources, including adenosine triphosphate (ATP), phosphocreatine (PCr), plus carbohydrates (CHO) like muscle glycogen and blood glucose can contribute to fatigue.

  13. Handbook of human-reliability analysis with emphasis on nuclear power plant applications. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Swain, A D; Guttmann, H E

    1983-08-01

    The primary purpose of the Handbook is to present methods, models, and estimated human error probabilities (HEPs) to enable qualified analysts to make quantitative or qualitative assessments of occurrences of human errors in nuclear power plants (NPPs) that affect the availability or operational reliability of engineered safety features and components. The Handbook is intended to provide much of the modeling and information necessary for the performance of human reliability analysis (HRA) as a part of probabilistic risk assessment (PRA) of NPPs. Although not a design guide, a second purpose of the Handbook is to enable the user to recognize error-likely equipment design, plant policies and practices, written procedures, and other human factors problems so that improvements can be considered. The Handbook provides the methodology to identify and quantify the potential for human error in NPP tasks.

  14. Safety and environmental health handbook

    Science.gov (United States)

    ,

    1989-01-01

    This Safety Handbook (445-1-H.) supplements the Geological Survey Safety Management Program objectives set forth in Survey Manual 445.1. Specifically, it provides a compact source of basic information to assist management and employees in preventing motor vehicle accidents, personal injuries, occupational diseases, fire, and other property damage or loss. All work situations incidental to the Geological Survey cannot be discussed in a handbook, and such complete coverage is not intended in this document. However, a wide range of subjects are covered in which a "common sense" approach to safety has been expressed. These subjects have been organized such that Chapters 1-5 address administrative issues, Chapters 6-12 address activities usually conducted within a facility, and Chapters 13-20 address field activities. No information contained in the Handbook is intended to alter any provision of any Federal law or executive order, Department of the Interior or Survey directive, or collective bargaining agreement. Questions or suggestions regarding the content of the Safety Handbook may be directed to the Survey Safety Manager, Administrative Division, Office of Facilities and Management Services, National Center, Reston, Virginia, Mail Stop 246. The previous edition of the Safety Handbook is superseded.

  15. OXFORD HANDBOOK OF SPORT AND EXERCISE MEDICINE

    Directory of Open Access Journals (Sweden)

    Domhnall MacAuley

    2007-03-01

    Full Text Available DESCRIPTION This flexicover handbook presents a user-friendly overview into the evolving discipline of sports medicine. The growing scientific and research base is summarised and essential views on treatment, preventive strategies, and optimal exercise recommendation are discussed briefly in the relevant chapters. This book has been designed for everyday use for the practitioners working in this medical field. It also has blank pages for the readers' own updates. PURPOSE This guide book aims to display the common problems and diagnoses in sports and exercise medicine and to concentrate on the up-to-date approaches, management plans, and evidence-based procedures of treatment at the same time. AUDIENCE As a comprehensive basic text this guide book could be useful for lecturers, teachers, practitioners and students of exercise and sports medicine as well as GPs, nurses and others who are especially interested in this field. FEATURES This handbook is partitioned into 24 chapters focusing on the needs of the patient and offering an immediate guide to all aspects of diagnosis and treatment, epidemiology, exercise benefits and physiological issues. The chapters are: 1. Immediate care, 2. Sports injury, 3. Benefits of exercise, 4. Physiothrepy and rehabilitation, 5. Hip and pelvis, 6. Knee, 7. Ankle and lower leg, 8. Foot, 9. Shoulder, 10. Elbow and forearm, 11. Wrist and hand, 12. Head and face, 13. Spine, 14. Cardiorespiratory, 15. Abdomen, 16. Infectious disease, 17. Arthritis, 18. Dermatology, 19. Disability, 20. Physiology, 21. Metabolic, 22. Women, 23. Aids to performance, 24. The team physician. ASSESSMENT This is a must-have handbook for all medics practising in sports and exercise medicine, as well as anyone who has a special interest in this area, especially GPs, nurses, physiotherapists; even coaches, trainers, biomechanical experts. I believe they will enjoy making use of this guide book as it is right to the point, easy to read and

  16. Component test for validation of the design life of reactor vessel wall of the fast breeder reactor SNR 300 regarding creep-fatigue. Modellversuch zur Absicherung der Auslegung der Reaktortankwand des SNR 300 hinsichtlich Kriechermuedung

    Energy Technology Data Exchange (ETDEWEB)

    Lohse, U. (Interatom GmbH, Bergisch Gladbach (Germany)); Laue, H. (Interatom GmbH, Bergisch Gladbach (Germany)); Rathjen, P. (Interatom GmbH, Bergisch Gladbach (Germany)); Maile, K. (Staatliche Materialpruefungsanstalt, Stuttgart (Germany)); Eckert, W. (Staatliche Materialpruefungsanstalt, Stuttgart (Germany)); Purper, H. (Staatliche Materialpruefungsanstalt, Stuttgart (Germany))

    1991-01-01

    The design of the reactor vessel wall is tested under a long-term creep-fatigue stress, with the aid of a similar components test. For this purpose, the results of calculation are compared with the experimental results concerning deformation depending on point and time, and damage depending on the initial state of material, point and time. (orig./HP)

  17. Experimental fatigue curves for aluminium brazed areas

    Science.gov (United States)

    Dimitescu, A.; Babiş, C.; Niţoi, D. F.; Radu, C.

    2017-08-01

    An important factor for the quality of joints is the brazed area. The fatigue check occupies a major position among many test procedures and methods, especially by the joining technologies. The results of processing the fatigue data experiments for aluminium brazed samples are used to find the regression function and the response surface methodology. The fatigue process of mechanical components under service loading is stochastic in nature. The prediction of time-dependent fatigue reliability is critical for the design and maintenance planning of many structural components.

  18. 14 CFR 23.627 - Fatigue strength.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Fatigue strength. 23.627 Section 23.627 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS... Fatigue strength. The structure must be designed, as far as practicable, to avoid points of...

  19. Handbook on Windows and Energy

    DEFF Research Database (Denmark)

    Thomsen, Kirsten Engelund; Schultz, Jørgen Munthe; Svendsen, Sv Aa Højgaard

    The handbook on windows and energy is a general description of windows with the main focus put on the energy performance. Common window products are described by commonly used nomenclature, description of frame and sash conctructions and description of commonly used glazing types.The energy...... flow and detailed calculation of light and solar transmittance is given.Different measurement techniques for characterization of window heat loss coefficient and total solar energy transmittance is described and references to interantional standards are given.Finally, the handbook includes...... a comprehensive list of window related standards and a list of Nordic research and development projects.Two programs are encloased in the handbook for calculation of solar radiation on inclined surfaces including a shadow correction and a simple program for evaluation of energy savings and risk of overtemperature....

  20. Handbook of relativistic quantum chemistry

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Wenjian (ed.) [Peking Univ., Beijing (China). Center for Computational Science and Engineering

    2017-03-01

    This handbook focuses on the foundations of relativistic quantum mechanics and addresses a number of fundamental issues never covered before in a book. For instance: How can many-body theory be combined with quantum electrodynamics? How can quantum electrodynamics be interfaced with relativistic quantum chemistry? What is the most appropriate relativistic many-electron Hamiltonian? How can we achieve relativistic explicit correlation? How can we formulate relativistic properties? - just to name a few. Since relativistic quantum chemistry is an integral component of computational chemistry, this handbook also supplements the ''Handbook of Computational Chemistry''. Generally speaking, it aims to establish the 'big picture' of relativistic molecular quantum mechanics as the union of quantum electrodynamics and relativistic quantum chemistry. Accordingly, it provides an accessible introduction for readers new to the field, presents advanced methodologies for experts, and discusses possible future perspectives, helping readers understand when/how to apply/develop the methodologies.