WorldWideScience

Sample records for fatigue des metaux

  1. Vacuum welding of metals; Soudage des metaux sous vide

    Energy Technology Data Exchange (ETDEWEB)

    Stohr, J A; Briola, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    This new welding process has been developed by the Commissariat a l'Energie Atomique (CEA) in France. The edges of the work-pieces are melted by the impact of an electron beam produced by an electron gun. Welding is carried out in a vacuum of 10{sup -4} to 10{sup -8} mm of mercury. The welding machine consists, diagrammatically, of: a) a metal enclosure in which a vacuum is produced; b) a cathode for electron emission, a high-voltage generator for accelerating these electrons, a focusing device; c) a mechanical device for moving (rotating) the work-piece. Advantages of the process: 1) possible welding of highly oxidizable metals (e.g. zirconium); 2) fabrication of high-vacuum-sealed metal containers; 3) production of very deeply penetrated welds. Therefore, this new process is particularly advantageous for atomic power applications, the fabrication of electron tubes and, more generally, for all industries in which very special metals are used. (author) [French] Ce procede de soudage a ete recemment mis au point au Commissariat a l'Energie Atomique en France (CEA). Il consiste a utiliser, pour fondre les levres des pieces a souder, l'impact d'un faisceau d'electrons produit par un canon a electrons. Le soudage s'effectue sous un vide de 10{sup -4} a 10{sup -8} mm de mercure. La machine a souder se compose schematiquement: a) d'une enceinte metallique ou l'on fait le vide; b) d'une cathode emettant des electrons, d'un generateur H.T. permettant d'accelerer ces electrons d'un dispositif de focalisation; c) d'un dispositif mecanique permettant le deplacement (rotation) de la piece a souder. Avantages de ce procede: 1) possibilite de souder les metaux tres oxydables (exemple: zirconium); 2) realisation de 'containers' metalliques fermes sous vide pousse; 3) obtention de profondeurs de soudures considerables. Ce nouveau procede est donc particulierement interessant pour l ' energie atomique, la fabrication des tubes electroniques et, en general, toutes les industries

  2. Simulation of the high temperature intergranular strain hardening in fatigue of materials with hold time; Modelisation de l'ecrouissage intragranulaire en fatigue des metaux a haute temperature avec temps de maintien

    Energy Technology Data Exchange (ETDEWEB)

    Sauzay, M.; Mottot, M.; Noblecourt, M.; Allais, L.; Monnet, I.; Perinet, J

    2003-07-01

    This paper aims to simulate the behavior of some alloys in high temperature fatigue-relaxation (creep), for a long hold time (one month for each cycle) when laboratory experiments are difficult to realize. The first part presents an estimation of the internal intergranular stresses. The second part deals with the recovery occurring during the hold time. (A.L.B.)

  3. Modeling of the fatigue intragranular strain hardening of metals at high temperature with keeping up time; Modelisation de l'ecrouissage intragranulaire en fatigue des metaux a haute temperature avec temps de maintien

    Energy Technology Data Exchange (ETDEWEB)

    Sauzay, M.; Mottot, M.; Noblecourt, M.; Allais, L.; Monnet, I.; Perinet, J. [CEA Saclay, Service de Recherche en Metallurgie Appliquee, DMN/SRMA, 91 - Gif-sur-Yvette (France)

    2003-07-01

    This study aims at foreseeing the behaviour of some alloys during high temperature fatigue-relaxation (creep) conditions when the maximum deformation is maintained during long times (about a month for each cycle). Such experiments can hardly be performed with laboratory tests. A simple modeling of the restoration occurring during the keeping of the conditions of deformation can explain the absence of dislocation microstructures. Abstract only. (J.S.)

  4. Metal extrusion using hydrostatic pressures; Le filage des metaux sous pression hydrostatique

    Energy Technology Data Exchange (ETDEWEB)

    Sauve, Ch [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1965-07-01

    The main problems connected with the deformation of metals due to extrusion are described. A method is put forward for calculating the rational rate of percentage deformation in the case of bar extrusion using a cylindrical container; reference is made to previous work on extrusion using a hydrostatic pressure with or without back-pressure. An extrusion process is described using hydrostatic pressure, without back-pressure, and using the lubricant for transmitting the thrust. This process has been used for eight years by the C.E.A. for the extrusion of a very wide range of metals, from beryllium to uranium and including steels; it leads to excellent surface textures. A very fine crystallization can be obtained on extruded products when the rate of extrusion is very low. There appears to be nothing against the use of high extrusion rates using this method. (author) [French] On expose les problemes generaux lies a la deformation des metaux par filage. On propose un calcul de la vitesse rationnelle de deformation pour cent dans le cas du filage de barres a partir d'un conteneur cylindrique, et l'on cite les travaux anterieurs sur le filage par faction d'une pression hydrostatique sans ou avec une contre-pression. On decrit un procede de filage par l'action d'une pression hydrostatique, sans contre-pression, utilisant le lubrifiant pour transmettre la poussee. Ce procede employe depuis 8 ans au C.E.A. pour filer les metaux les plus divers, depuis le beryllium jusqu'a l'uranium en passant par les aciers, permet d'obtenir d'excellents etats de surface. Une cristallisation tres fine peut etre obtenue sur les produits files lorsque le filage est tres lent. Rien ne parait s'opposer a ce que des filages rapides soient effectues avec cette methode. (auteur)

  5. Vacuum brazing of metals (1961); Brassure sous vide des metaux (1961)

    Energy Technology Data Exchange (ETDEWEB)

    Lapujoulade, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1961-07-01

    We have studied brazing in vacuum aiming its application for the making of containers and apparatus meant for high vacuum (p < 10{sup -8} torr). We first define the wettability of a brazing alloy on a metal and we remind the influence of the various parameters which act on this wettability (nature of the solid, of the liquid, geometrical and physicochemical state of the surface, metallurgical reactions occurring at the interface, temperature, time). We give then the results of the tests carried out in order to determine the conditions of wettability in vacuum of some brazing alloys on metals which can be used for the above mentioned apparatus (stainless steel, aluminium, bronze, titanium, zirconium, kovar, nickel, copper). (author) [French] Nous avons etudie la brasure sous vide en vue de son application a la construction d'enceintes et apparelilage destines a l'obtention des vides eleves (p < 10{sup -8} torr). Nous definissons d'abord la mouillabilite d'une brasure sur un metal et nous rappelons l'influence des differents parametres qui agissent sur cette mouillabilite (nature du solide, du liquide, etat geometrique et physico-chimique de la surface, reactions metallurgiques a l'interface, temperature, temps). Nous donnons ensuite les resultats des essais effectues dans le but de determiner les conditions de mouillabilite sous vide de certaines brassures sur des metaux utilisables dans les constructions mentionnees ci-dessus (acier inoxydable, bronze d'aluminium, titane, zirconium, kovar, nickel, cuivre). (auteur)

  6. On the structure of heavy metals; Sur la structure des metaux lourds

    Energy Technology Data Exchange (ETDEWEB)

    Friedel, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Faculte des Sciences de l' Universite de Paris, 75 (France)

    1958-07-01

    The properties of the last series of Mendeleef's table are compared with those of the elements of the preceding series. This comparison suggests an electronic structure of the 'transition metal' type, with narrow bands, at the beginning of this series (up to certain phases at least of plutonium); then of the rare earth metal type, with independent non-saturated internal layers, further on in the series. The 5 f orbits seem to play an important part in these two types of structure, from uranium on. A more detailed study of the very heavy elements (americium and beyond) and alloys would allow these conclusions to be confirmed. Certain general points, concerning the nature of homopolar connections and paramagnetism in the transition metals, are developed in an additional section. (author) [French] Les proprietes des elements de la derniere serie du tableau de Mendeleef sont comparees a celles des elements des series precedentes. Cette comparaison suggere une structure electronique du type 'metal de transition', a bandes etroites, au debut de cette serie (jusqu'a certaines phases au moins du plutonium); puis du type d'un metal des terres rares, a couches internes non saturees independantes, au-dela dans la serie. Les orbitales 5 f semblent jouer un r e important, dans ces deux types de structures, a partir de l'uranium. Une etude plus poussee des elements tres lourds (americium et au-dela) et des alliages permettrait de confirmer ces conclusions. Certains points generaux, concernant la nature des liaisons homopolaires et le paramagnetisme dans les metaux de transition, sont developpes en annexe. (auteur)

  7. Energy of solution of rare gases in metals; Energie de dissolution des gaz rares dans les metaux

    Energy Technology Data Exchange (ETDEWEB)

    Blin, J [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1959-07-01

    In order to calculate the energy of solution of rare gases in metals, a method which has given good results in the case of solid solutions in metals has been applied. Nevertheless, it was necessary for this, to know the compressibility of gases under conditions which are not feasible in a laboratory. H. Jensen has studied this compressibility in a precise way for the rare gases Ar, Kr, Xe. It has thus been possible to calculate the energy of solution of these gases in different metals. These calculations have been carried out most thoroughly for the case of uranium. (author) [French] Nous avons applique au calcul de l'energie de dissolution des gaz rares dans les metaux, une methode qui a donne de bons resultats dans le cas des solutions solides metalliques. Il fallait pour cela connaitre la compressibilite des gaz rares dans des conditions impossibles a realiser en laboratoire. Cette compressibilite a ete etudiee par H. Jensen de facon precise pour les gaz rares A, Kr, Xe. Nous avons pu, de ce fait, calculer les energies de dissolution de ces gaz dans les differents metaux. Les calculs ont ete faits plus completement dans le cas de l'uranium. (auteur)

  8. Energy of solution of rare gases in metals; Energie de dissolution des gaz rares dans les metaux

    Energy Technology Data Exchange (ETDEWEB)

    Blin, J. [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1959-07-01

    In order to calculate the energy of solution of rare gases in metals, a method which has given good results in the case of solid solutions in metals has been applied. Nevertheless, it was necessary for this, to know the compressibility of gases under conditions which are not feasible in a laboratory. H. Jensen has studied this compressibility in a precise way for the rare gases Ar, Kr, Xe. It has thus been possible to calculate the energy of solution of these gases in different metals. These calculations have been carried out most thoroughly for the case of uranium. (author) [French] Nous avons applique au calcul de l'energie de dissolution des gaz rares dans les metaux, une methode qui a donne de bons resultats dans le cas des solutions solides metalliques. Il fallait pour cela connaitre la compressibilite des gaz rares dans des conditions impossibles a realiser en laboratoire. Cette compressibilite a ete etudiee par H. Jensen de facon precise pour les gaz rares A, Kr, Xe. Nous avons pu, de ce fait, calculer les energies de dissolution de ces gaz dans les differents metaux. Les calculs ont ete faits plus completement dans le cas de l'uranium. (auteur)

  9. Lattice Dynamics of Transition Metals; Dynamique de Reseau des Metaux de Transition

    Energy Technology Data Exchange (ETDEWEB)

    Woods, A. D.B. [Chalk River Nuclear Laboratories, Chalk River, ON (Canada)

    1965-04-15

    'onde) pour les modes de vibration normaux de plusieurs cristaux de metaux de transition-a structure cubique centree ont fait recemment l'objet de mesures a la temperature ambiante. Les courbes de dispersion relatives au niobium, etablies par Nakagawa et Woods, presentent des particularites tres exceptionnelles et on n'a pu faire concorder les resultats obtenus avec la theorie a l'aide d'un modele Born et von Karman qu'en tenant compte des interactions englobant des voisins tres eloignes (au-dela du huitieme). En procedant ulterieurement a des mesures sur le tantale, Woods a obtenu des resultats tres semblables, ce qui n'est guere surprenant puisque le niobium et le tantale figurent dans la colonne V du tableau de la classification periodique et qu'ils possedent des proprietes electroniques analogues sous de nombreux rapports. Les courbes de dispersion etablies par Woods et Chen pour le molybdene et par Chen et Brockhouse pour le tungstene ont montre que si ces deux metaux qui figurent dans la colonne VI du tableau ont des relations de dispersion semblables l'une a l'autre, ces relations different sensiblement de celles des metaux de la colonne V, niobium et tantale. Les caracteristiques generales de la relation v(q) pour le molybdene et le tungstene peuvent etre decrites avec une grande precision au moyen d'un modele Born et von Karman de forces tenant compte d'une structure a symetrie axiale englobant le troisieme voisin, bien que plusieurs caracteristiques importantes ne soient pas reproduites par ce modele. Pour le molybdene, une de ces caracteristiques est une anomalie frappante de la branche (L) longitudinale [{zeta}{zeta}{zeta}] ou la frequence passe de v 6.3 x 10{sup 12} c/s pour {zeta} = 0.92 to v= 5.5 x 10{sup 12} c/s pour {zeta} = 1.0. Si cette caracteristique et d'autres, qui ont aussi ete observees, sont des anomalies de Kohn, leurs positions sont compatibles avec les dimensions de la surface de Fermi des metaux de la colonne V, proposees par Lomer. On peut donc

  10. On the interactions between carbon monoxide and transition metals; Contribution a l'etude des interractions de l'oxyde de carbone et des metaux de transition

    Energy Technology Data Exchange (ETDEWEB)

    Degras, D E [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1966-12-01

    The sticking of carbon monoxide on surface atoms of transition metals is a collective phenomenon: according to the adsorption process period which is considered, this phenomenon may be formally described either by the Elovich equation or essentially from a steric point of view. The process rate depends upon the nature of the metal, the carbon monoxide pressure the temperature and the population densities of the induced and fundamental energy levels of the gas-solid bond. At least one of these induced levels tends to disappear with increasing time. For a localised adsorption and taking into account the surface Rayleigh waves, the analysis of the surface entropy yields the so-called iso-kinetic temperature for thermal desorption. This temperature is correlated with the cohesive energy of the metal surface atoms. Finally, it is shown that the interactions of a low energy electron bean with adsorbed molecules - reflection and energy exchange, desorption, ionization or dissociative ionization are strongly dependent on the energy levels of the gas-solid bond and the relative populations of these levels. (author) [French] La capture des molecules d'oxyde de carbone par les atomes de surface des metaux de transition est un phenomene collectif: il peut etre decrit formellernent soit par l'equation d'Elovich, soit a partir de considerations purement steriques suivant la periode envisagee dans l'evolution du processus d'adsorption. Cette evolution est determinee par la nature du metal, la pression d'oxyde de carbone, la temperature et la densite des populations des niveaux fondamental et induits de la liaison. L'un au moins de ceux-ci tend a disparaitre avec le temps. L' etude de l'entropie du complexe de surface a partir des ondes de Rayleigh en adsorption localisee permet de retrouver theoriquernent la temperature dite isocinetique dans la dissociation thermique de ce complexe. Cette temperature depend de la cohesion des atomes rnetalliques de surface. Enfin l'interaction d

  11. Revetements nanostructures pour la protection des metaux dans les environnements marins

    Science.gov (United States)

    Brassard, Jean-Denis

    nanoparticules de ZnO enrobees de silane sont imbriquees dans le reseau nanostructure de silicone copolymerise. Le revetement C produit de cette facon satisfaisait a la norme ASTM d'adherence a un substrat, mais n'est pas superhydrophobe, restant seulement hydrophobe avec un angle de contact reduit de 123°. Tous les revetements optimises developpes montrent un niveau de resistance a la corrosion beaucoup plus eleve que leur substrat tant en polarisation qu'en impedance electrochimique. Toutefois aucune relation entre l'hydrophobicite et le niveau de resistance a la corrosion n'a ete etablie. Il a seulement ete determine que ce sont la nature chimique de l'interface, a savoir ses proprietes electriques en isolation, son hydrophobicite et la presence d'air, de meme que l'epaisseur qui sont les deux aspects essentiels a respecter pour avoir de bonnes proprietes anticorrosion. Les trois revetements A, B, et C ont ete evalues quant a la reduction d'adherence et d'accumulation evaluee dans les environnements givrants rencontres en mer arctique. En premiere position, le revetement superhydrophobe B avec un angle de contact de 154°et un facteur de reduction l'adherence (ARF) de la glace sur l'aluminium de 14 et de la quantite accumulee 5% moindre. En seconde position, le revetement superhydrophobe A avec un angle de contact de 155° et un facteur ARF de 6, lequel n'a pas ete evalue en accumulation; et en troisieme position le revetement hydrophobe C avec un facteur de reduction de 3, lequel ne reduit pas la masse de glace accumulee. Deux mecanismes ont ete trouves responsables de l'adherence a la glace sur les revetements developpes soient: 1. l'effet d'ancrage diminue par la presence de nanorugosites hydrophobes recouvrant les microrugosites pouvant adsorber de l'air et 2. L'effet de la quantite d'air adsorbe dans la structure de l'interface, a savoir que pour des angles de contact egaux, si la quantite d'air augmente dans la microstructure, donc un Rrms plus eleve, ferait que l

  12. Application of the Moessbauer effect to the study of the structure of transition metal complexes; Applications de l'effet Mossbauer a l'etude de la structure des complexes des metaux de transition

    Energy Technology Data Exchange (ETDEWEB)

    Tsymbal, C [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1968-07-01

    In this survey, the structural investigations of transition metal complexes by the hyperfine interactions in the Moessbauer effect are described. The isomer shift provides a unique tool for estimating s electrons covalency in high spin complexes and one of the best pieces of evidence for the importance of bacle donation in low spin complexes. The electric field gradient deriving from quadrupole coupling measurements is correlated with the energy levels distribution of d orbitals in high spin complexes, whereas in low spin complexes it originates from the unbalanced d electrons. (authors) [French] Dans cette etude, nous decrivons les applications des interactions hyperfines dans l' effet Mossbauer a l'etude de la structure des complexes des metaux de transition. Le deplacement isomerique donne des informations tres utiles sur la covalence des electrons s dans les complexes a spin eleve et met en evidence d'une maniere nette l'importance du phenomene de 'bacle donation' dans les complexes a spin faible. Le gradient de champ electrique qui provient des mesures d'interaction quadripolaire est lie a la distribution des niveaux d'energie des orbitales d dans les complexes a spin eleve alors que dans les complexes a spin faible, il est provoque par des electrons d non apparies. (auteurs)

  13. Specific heat measurements on metals up to their melting point; Mesure de la chaleur specifique des metaux jusqu'a leur temperature de fusion

    Energy Technology Data Exchange (ETDEWEB)

    Affortit, Ch [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1967-07-15

    We have built an apparatus to measure the specific heat of metal up to the melting point. The method is the pulse-heating method, where the specimen is heated very rapidly (1/10 s) from room temperature to the melting point by a very intense d.c. current (1000 A). The simultaneous measurements of intensity, voltage and temperature in the specimen allows a calculation of the specific heat. We have obtained good results for niobium, tungsten, tantalum and uranium. The accuracy is around 3 to 5 per cent and allows a measurement of the heat of formation of vacancies near the melting temperature. (author) [French] Nous avons construit un appareil permettant la mesure de la chaleur specifique des metaux jusqu'a leur temperature de fusion. La methode utilisee est la methode dite de chauffage instantane, L'echantillon est echauffe tres rapidement (1/10 s) de la temperature ambiante a la temperature de fusion par le passage d'un courant tres intense ({approx} 1000 A). L'enregistrement simultane de l'intensite du courant, de la difference de potentiel aux bornes de l'echantillon et de la temperature, permet de calculer la chaleur specifique. Nous avons obtenu de bons resultats pour le niobium, le tungstene tantale et l'uranium. La precision de la methode est de l'ordre de 3 a 5 pour cent et permet une mesure de la chaleur de formation des lacunes au voisinage de la fusion. (auteur)

  14. Coalescence of organic solutions in acid and metal extraction by tri-alkylamines; Demixtion des solutions organiques lors de l'extraction des acides et des metaux par les trialcoylamines

    Energy Technology Data Exchange (ETDEWEB)

    Blain, J [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1970-07-01

    'extraction d'acide en exces; l'extraction des metaux dans l'ordre UO{sub 2}{sup ++} < Pu{sup 4+} {approx} Th{sup 4+}; la diminution de la longueur des chaines alcoyle de l'amine; les solvants organiques de polarite decroissante. Une etude thermodynamique nous a en outre permis de montrer que, pour un systeme d'extraction donne (amine, solvant; acide(metal)), il n'existe qu'une seule isotherme de dedoublement. (auteur)

  15. The thermodynamic approach of the pilot-scale purification of refractory metals; Application de la thermodynamique a la mise au point des methodes de purification industrielle des metaux et semi-metaux refractaires

    Energy Technology Data Exchange (ETDEWEB)

    Accary, A [Commissariat a l' Energie Atomique, Dir. des Piles Atomiques, Saclay (France). Centre d' Etudes Nucleaires

    1967-06-15

    The author shows how the thermodynamic can be applied to the prediction of the evolution of impurities from a metal or an alloy being melted and cast at the pilot-scale using electron bombardment and continuous casting in a water cooled copper. He studies this possibility on two examples: - the melting vanadium, - the melting of the uranium monocarbide. He shows using only the constants available in the literature and a few special runs in the pilot-equipment itself it is possible to determine: - the possibility of elimination of anyone impurity by keeping the material in the melting state under vacuum as well as the limit of purification which is achievable under given technological conditions, - the proportion of an impure metal which should be vaporized in order to bring the level of a given impurity down to a predetermined level and the necessary duration of heating. (author) [French] L'auteur montre comment la thermodynamique peut etre appliquee a la prevision de l'evolution d'un metal ou d'un alliage fondu a l'echelle pilote par bombardement d'electrons et coule en continu dans un creuset de cuivre refroidi. Il etudie cette possibilite sur deux cas particuliers: - la fusion de vanadium, - la fusion du monocarbure d'uranium. Il montre que, grace aux constantes disponibles dans la litterature et a des essais simples faits a l'aide de l'appareillage pilote lui-meme, on peut determiner: - la possibilite d'eliminer une impurete par maintien a l'etat fondu ainsi que la limite de purification dans des conditions technologiques donnees, - la proportion d'un metal brut qu'il faut evaporer pour amener sa teneur en une impurete a un niveau donne ainsi que la duree de chauffage necessaire, - la nature des additions propres a favoriser le depart d'une impurete et l'efficacite comparee des additions possibles. (auteur)

  16. Theoretical Aspects of Phonon Dispersion Curves for Metals; Aspects Theoriques des Courbes de Dispersion des Phonons pour les Metaux; Teoreticheskie aspekty fononnykh dispersionnykh krivykh dlya metallov; Aspectos Teoricos de las Curvas de Dispersion Fononica en Metales

    Energy Technology Data Exchange (ETDEWEB)

    Cochran, W. [Department of Natural Philosophy, University of Edinburgh, Scotland (United Kingdom)

    1965-04-15

    Reasonably complete knowledge of the phonon dispersion curves for at least a dozen metallic elements and intermetallic compounds has now been obtained from neutron inelastic scattering experiments. The results have one feature in common: when analysed in terms of interatomic force constants they reveal the presence of comparatively long-range forces extending over several atomic spacings. The results for lead are particularly interesting; it did not prove possible to fit them by a force-constant model, but the dispersion curves for wave vectors in symmetry directions when analysed in terms of force constants between planes of atoms showed an oscillatory interatomic potential extending over distances of more than 20A. This review is concerned with recent theoretical work which has a bearing on the calculation of phonon dispersion curves for metals and the explanation of the long range of the interatomic potential. The best hope at present for a general treatment of atomic interaction in metals appears to lie in the ''method of neutral pseudo-atoms'', (a description recently coined by Ziman). This approximate theory is outlined and its relevance to Kohn anomalies in phonon dispersion curves is discussed. Experimental data for sodium is consistent with the theory, and the interatomic potential in sodium varies periodically in a distance {pi}/k{sub F}, where fik{sub F} is the Fermi momentum, as has already been demonstrated by Koenig in a different way. More exact calculations have been made for sodium by Toya and by Sham. The relationship between the different methods and other work of a more general character such as that of Harrison are discussed. (author) [French] A la suite d'experiences de dispersion inelastique des neutrons, on a maintenant une connaissance assez complete des courbes de dispersion des phonons pour une douzaine de metaux et de composes intermetalliques au moins. Les resultats presentent le caractere commun suivant: si on les analyse en fonction

  17. Contribution to a research on electron beam welding of metals; Contribution a l'etude de la soudure des metaux par faisceau d'electrons

    Energy Technology Data Exchange (ETDEWEB)

    Stohr, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-03-15

    pressure, occasioned by additional elements with high vapour pressure, put on the formation of the hole. Micrographs made with welded parts of different metals show melting segregations similar to those obtained when filling a mould of great length. One may point out, that the geometrical configuration adopted by these segregations confirm the hypothesis of the metal flow, as previously contemplated. The study of these segregations, observed during examination through an interferential contrast microscope, has been attempted with a Castaing probe and by radiographical inspection of thin plates: no heterogeneity whatever has been observed. Mechanical tests operated on welded parts, did not show any appreciable difference existing between failure, elongation, yield point and impact values of a welded piece and those of a piece of the basic metal. This method applied on stainless steel shows not only excellent results, but also that the number of calories provided per length unit increases slightly with the welded thickness, whereas one could have expected a linear expression. Results obtained during this work, allow us to sift a certain number of data inherent to the electron beam welding, and to reflect on the definition of welding parameters versus aim to be reached. (author) [French] La soudure des metaux par faisceau d'electrons s'effectue par deplacement du point de focalisation du faisceau sur la ligne de jonction des deux pieces a assembler. Les parametres de soudure sont la puissance du canon W, la valeur de la surface d'impact des electrons S, la vitesse de soudure s. Des le debut de notre etude en 1954, est apparu le role essentiel joue par la puissance specifique W/s, sur la forme de la zone soudee et la profondeur de penetration. Une etude plus systematique a ete entreprise aux laboratoires du C.E.N. Saclay sous le patronage de Monsieur le Professeur CHAUDRON pour mieux definir l'Importance des divers parametres de soudure et voir l'influence exercee par eux sur

  18. Recent progress in the determination of gases in metals by emission spectrography (1963); Progres recents dans la determination des gaz dans les metaux par spectrographie d'emission (1963)

    Energy Technology Data Exchange (ETDEWEB)

    Rossi, G; Melamed, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1963-07-01

    The Fassel method for analysis of bases in metals was used. By employing a smaller, completely cooled chamber greater sensitivity and lover blank values were obtained. A straight calibration curve, independent of the sample nature was established for oxygen using graphite pellets containing known amounts of ZnO and SnO{sub 2}. The calibration curve for hydrogen was obtained from previously analysed Zircaloy samples. In bath cases a lower limit of sensitivity of 15 {mu}g was attained. (authors) [French] On a utilise la methode Fassel pour l'analyse des metalloides dans les metaux. En employant une chambre de volume reduit avec refroidissement des parois, ou a pu abaisser la limite de sensibilite et reduire le blanc a une valeur negligeable. Une courbe de dosage pour l'oxygene, lineaire jusqu'a environ 15 {mu}g et independante de la nature de l'echantillon, a ete obtenue a partir des melanges oxyde de zinc + graphite et oxyde d'etain + graphite. Une courbe de dosage pour l'hydrogene lineaire jusqu'a 15 {mu}g a ete obtenue en partant d'echantillons de Zircaloy a teneur connue en hydrogene. (auteurs)

  19. Reduction by metals dissolved in liquid ammonia of keto steroids. Equilibration of the alcohols; Reduction par les metaux dissous dans l'ammoniac liquide de cetones en serie steroide. Equilibration des alcools

    Energy Technology Data Exchange (ETDEWEB)

    Giroud, A M [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1970-07-01

    'une cetone par les metaux en dissolution fait intervenir deux electrons: on peut considerer comme intermediaire un radical-anion, puis un dianion ou un carbanion. Le radical-anion pouvant aussi se dimeriser pour donner des pinacols. Pour interpreter les resultats des reductions, il nous fallait connaitre les stabilites relatives des alcools ce qui nous a conduit a faire des equilibrations. Dans un premier chapitre, nous etudions les methodes de preparation de l'androstanone-ll et des androstanols-ll{alpha} et ll{beta}. Nous verifions ensuite qu'il n'est pas possible selon nos methodes de conclure sur la stabilite relative des deux alcools par equilibrations experimentales. Nous decrivons enfin les methodes de reduction de la cetone par les metaux alcalins et alcalino-terreux dissous dans l'ammoniac liquide, suivant deux procedes: soit en presence de donneur de protons, soit avec addition posterieure de donneur de protons. Ces reductions conduisent a un melange des deux alcools ou l'isomere {alpha} equatorial stable predomine. Dans un deuxieme chapitre, nous etudions l'action de l'acide selenique et de l'eau oxygenee sur la cholestanone-3, reaction qui nous a permis d'etudier la preparation et la stereochimie des derives du A-nor cholestane. Nous decrivons ensuite la preparation des A-nor cholestanols 2{alpha} et 2{beta} et des acetates correspondants. L'equilibration par des methodes chimiques de ces alcools montre que l'alcool 2 {alpha} est plus stable que l'alcool 2{beta}, ce qui est confirme par le calcul. Enfin, la reduction de la A-nor cholestanone-2 par les metaux en dissolution conduit toujours de facon preponderante a l'epimere 2 {beta} le moins stable avec en outre formation de pinacols. Nous consacrons enfin le troisieme chapitre a l'etude des reductions de l'androstanone-17 et des stabilites relatives des deux alcools 17{alpha} et 17{beta}. Quel que soit le mode operatoire utilise, nous obtenons toujours presque exclusivement l'acool 17{beta} le plus stable. D

  20. Reduction by metals dissolved in liquid ammonia of keto steroids. Equilibration of the alcohols; Reduction par les metaux dissous dans l'ammoniac liquide de cetones en serie steroide. Equilibration des alcools

    Energy Technology Data Exchange (ETDEWEB)

    Giroud, A.M. [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1970-07-01

    'une cetone par les metaux en dissolution fait intervenir deux electrons: on peut considerer comme intermediaire un radical-anion, puis un dianion ou un carbanion. Le radical-anion pouvant aussi se dimeriser pour donner des pinacols. Pour interpreter les resultats des reductions, il nous fallait connaitre les stabilites relatives des alcools ce qui nous a conduit a faire des equilibrations. Dans un premier chapitre, nous etudions les methodes de preparation de l'androstanone-ll et des androstanols-ll{alpha} et ll{beta}. Nous verifions ensuite qu'il n'est pas possible selon nos methodes de conclure sur la stabilite relative des deux alcools par equilibrations experimentales. Nous decrivons enfin les methodes de reduction de la cetone par les metaux alcalins et alcalino-terreux dissous dans l'ammoniac liquide, suivant deux procedes: soit en presence de donneur de protons, soit avec addition posterieure de donneur de protons. Ces reductions conduisent a un melange des deux alcools ou l'isomere {alpha} equatorial stable predomine. Dans un deuxieme chapitre, nous etudions l'action de l'acide selenique et de l'eau oxygenee sur la cholestanone-3, reaction qui nous a permis d'etudier la preparation et la stereochimie des derives du A-nor cholestane. Nous decrivons ensuite la preparation des A-nor cholestanols 2{alpha} et 2{beta} et des acetates correspondants. L'equilibration par des methodes chimiques de ces alcools montre que l'alcool 2 {alpha} est plus stable que l'alcool 2{beta}, ce qui est confirme par le calcul. Enfin, la reduction de la A-nor cholestanone-2 par les metaux en dissolution conduit toujours de facon preponderante a l'epimere 2 {beta} le moins stable avec en outre formation de pinacols. Nous consacrons enfin le troisieme chapitre a l'etude des reductions de l'androstanone-17 et des stabilites relatives des deux alcools 17{alpha} et 17{beta}. Quel que soit le mode operatoire utilise, nous

  1. Kinetic study of the alkaline metals oxidation by dry oxygen; Etude cinetique de l'oxydation des metaux alcalins par l'oxygene sec

    Energy Technology Data Exchange (ETDEWEB)

    Touzain, Ph. [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1967-06-15

    The oxidation of lithium, sodium, potassium, rubidium, cesium and sodium-potassium alloys by dry oxygen is studied at several temperatures and in the oxygen pressure range 40 to 400 mmHg. One distinguishes three different oxidation behaviours (inflammation, ignition and slow combustion) whose zones are precised in function of the temperature. The slow oxidation kinetic laws, the composition of oxides and the motive of oxides colorations are determined. At least, the experimental data are construed theoretically. (author) [French] L'oxydation du lithium, du sodium, du potassium, du rubidium, du cesium et des alliages sodium-potassium par l'oxygene sec est etudiee a diverses temperatures et a des pressions comprises entre 40 et 400 mmHg d'oxygene. On distingue trois processus d'oxydation differents (l'inflammation, l'ignition et la combustion lente) dont les domaines en fonction de la temperature sont precises. Les lois cinetiques d'oxydation lente, la nature des oxydes formes ainsi que les causes des colorations de ces oxydes sont determinees. Enfin les resultats obtenus sont interpretes theoriquement. (auteur)

  2. Kinetic study of the alkaline metals oxidation by dry oxygen; Etude cinetique de l'oxydation des metaux alcalins par l'oxygene sec

    Energy Technology Data Exchange (ETDEWEB)

    Touzain, Ph [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1967-06-15

    The oxidation of lithium, sodium, potassium, rubidium, cesium and sodium-potassium alloys by dry oxygen is studied at several temperatures and in the oxygen pressure range 40 to 400 mmHg. One distinguishes three different oxidation behaviours (inflammation, ignition and slow combustion) whose zones are precised in function of the temperature. The slow oxidation kinetic laws, the composition of oxides and the motive of oxides colorations are determined. At least, the experimental data are construed theoretically. (author) [French] L'oxydation du lithium, du sodium, du potassium, du rubidium, du cesium et des alliages sodium-potassium par l'oxygene sec est etudiee a diverses temperatures et a des pressions comprises entre 40 et 400 mmHg d'oxygene. On distingue trois processus d'oxydation differents (l'inflammation, l'ignition et la combustion lente) dont les domaines en fonction de la temperature sont precises. Les lois cinetiques d'oxydation lente, la nature des oxydes formes ainsi que les causes des colorations de ces oxydes sont determinees. Enfin les resultats obtenus sont interpretes theoriquement. (auteur)

  3. Mechanical pumps for liquid metals; Pompes mecaniques pour metaux liquides

    Energy Technology Data Exchange (ETDEWEB)

    Baumier, J; Gollion, H J [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1964-07-01

    The pumping of liquid metals by centrifugal pumps poses two principal problems. These are hermetic sealing of the rotating shaft and, its guidance where immersed in liquid metal. The solutions to the problems used on 13 experimental pumps are given here. The resolution of the guidance problem consists in the majority of cases in the utilisation of hydrostatic bearings. Accordingly, a theoretical study was instituted for the first time to calculate the bearings of the earlier pumps. After this, an experimental study was carried out, to check the theory by water tests. A relation for bearing calculation of pumps with diffusers is proposed. Finally the influence of the bearing elasticity on the shafts critical speed is studied. (authors) [French] Le pompage des metaux liquides, par des pompes centrifuges, pose 2 principaux problemes, qui sont: d'une part, la realisation d'une excellente etancheite au passage de l'arbre, d'autre part, son guidage sur la partie immergee dans le metal liquide. Les solutions retenues pour resoudre ces problemes sur 13 pompes experimentees sont presentees. Le probleme du guidage de l'arbre, a dans la majorite des cas ete resolu en utilisant un palier hydrostatique, aussi l'etude en a d'abord ete approfondie de facon theorique pour calculer les paliers des premieres pompes, puis experimentale pour controler la theorie, en effectuant des essais a l'eau. On propose une relation pour calculer les paliers des pompes a diffuseurs. On a en outre effectue une etude de l'influence de l'elasticite du palier hydrostatique sur la vitesse critique de l'arbre. (auteurs)

  4. Caracterisation de la qualite des eaux de I' oued Kebir Quest (Nord ...

    African Journals Online (AJOL)

    Mots cles : Kebir Ouest - Skikda - Bassin versant - Qualite - Pollution - Metaux lourds. Abstract .... approche servira au suivi de l 'evolution annuelle des concentrations des ..... Watershed Management: principles and practice. New York, Wiley ...

  5. Fatigue of Range 3 Drill Pipe Fatigue des tiges de forage de gamme 3

    Directory of Open Access Journals (Sweden)

    Lubinski A.

    2006-11-01

    Full Text Available Past work on permissible hole curvature ta avoid drill pipe fatigue was bosed upon the assumption that drill pipe does not contact the wall of the hale between tool joints. In the present paper this assumption is removed, and the pipe may either be in contact or in no contact with the hale, whichever is actually the case. Both mothemotics and results in form of grophs are presented and, discussed. The findings of this palper apply mainly to Range 3 drill pipe, but in the case of 3 I/2 in (88.9 mm drill pipe, application is useful even for Range 2. Usage and field results with Range 3 drill pipe are reported. Les travaux déjà effectués sur la courbure admissible dans les trous de forage (« dag legs » pour éviter la fatigue des tiges de forage sont basés sur l'hypothèse que celles-ci ne rentrent pas en contact avec la paroi entre deux raccords de tige. Dans cet article on écarte une telle hypothèse : la tige peut être ou non en contact avec la paroi. Les équations mathématiques et les résultats sous forme graphique sont présentés et discutés. Ils s'appliquent principalement aux tiges de gamme 3 mais sont aussi utiles à celles de gamme 2 et de diamètre égal à 3 I/2 pouces (88,9 mm. On indique l'utilisation et les résultats sur chantier pour les tiges de gamme 3.

  6. Use of radioisotopes in the systematic analysis of impurities in metals of very high purity; Application des radioisotopes a l'analyse systematique des impuretes dans les metaux de tres haute purete; Primenenie radioizotopov v sistematicheskom analize primesej v vysokochistykh metallakh; Aplicacion de los radioelementos al analisis sistematico de las impurezas en los metales muy puros

    Energy Technology Data Exchange (ETDEWEB)

    Albert, Philippe; Gaittet, Jean [Centre d' Etudes de Chimie Metallurgique (C.N.R.S.), Vitry (France)

    1962-01-15

    Using the ''zone melting'' method, very-high-purity metals with impurity concentrations of the order of 10{sup -6} to 10{sup -8} can be obtained. These metals are prepared in small quantities only and it must be possible to determine with great sensitivity the content of a very large number of elements from a single sample. The authors have been able by systematic analysis of aluminium and iron after neutron irradiation to determine 45 elements from a single sample of the order of 1 g. This analysis of a large number of impurities was made possible only by the cascade separation of radioisotopes created during irradiation in more than 40 analytical fractions. Most of the radioisotopes are then isolated radiochemically pure and are simultaneously identified by study of their radioactive decay period and {gamma}-ray spectrum. By supplementing this systematic analysis with determination of certain elements from separate samples, it may be foreseen that the activation method will enable about 60 elements to be determined, either by neutron irradiation (in the case of sulphur, phosphorous, chlorine, barium, etc), or by recourse to the reactions produced by deuterons (in that of carbon and boron). The authors lay special emphasis on the results and implications of their analyses. (author) [French] La methode de la permet d'obtenir des metaux de tres haute purete ou les concentrations en impuretes sont de l'ordre de 10{sup -6} a 10{sup -8}. Ces metaux sont prepares en petites quantites et il est tres important de pouvoir doser avec grande sensibilite un tres grand nombre d'elements sur une seule prise d'essai. Pour cela, l'analyse systematique de l'aluminium et du fer par irradiation neutronique nous a permis de doser quarante-cinq elements sur une prise d'essai de l'ordre du gramme. Cette analyse d'un grand nombre d'impuretes n'a ete rendue possible que par la separation en cascade des radioisotopes crees pendant l'irradiation en plus de quarante fractions

  7. Fatigue damage of nuclear facilities; Endommagement par fatigue des installations nucleaires

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    The conference on the fatigue damage of nuclear facilities, organized by the SFEN (french society of nuclear energy), took place at Paris the 23. of november 2000. Eleven papers were presented, showing the state of the art and the research programs in the domain of the sizing rules, safety, installations damage, examination and maintenance. (A.L.B.)

  8. Influence de la nuance d'acier des roues ferroviaires en Fatigue de Contact de Roulement

    Directory of Open Access Journals (Sweden)

    Langueh Amavi

    2013-11-01

    Full Text Available Cet article propose une méthodologie de prédiction de la durée de vie des roues ferroviaires permettant de prendre en compte les sollicitations locales via la géométrie réelle du contact roue/rail, le comportement inélastique du matériau (acier et d'intégrer un critère de fatigue. Le contexte industriel, d'étudier l'influence de la nuance d'acier sur la durabilité de la roue. Les principales étapes de l'approche sont l'identification du comportement des matériaux, la détermination des champs de contrainte-déformation stabilisés et l'application d'un critère de fatigue. L'algorithme stationnaire est utilisé pour déterminer les contraintes et déformations suivant les conditions d'exploitation. Trois aciers ont été étudiés en analysant leurs réponses mécaniques, leurs limites d'adaptation et leurs durées de vie moyenne.

  9. Influence of a hydrostatic pressure on the diffusion in metals having a cubic structure; Contribution a l'etude de l'influence de la pression hydrostatique sur la diffusion dans les metaux cubiques

    Energy Technology Data Exchange (ETDEWEB)

    Beyeler, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1969-07-01

    In view of obtaining informations on the structure of vacancies. We have determined, by diffusion experiments under high pressure, the activation volumes for self diffusion in different face centered cubic metals: silver, gold, copper, aluminium and in body centered cubic uranium (gamma phase). Activation volumes for noble metals diffusion in aluminium have also been investigated. The experimental results on gold, silver and copper are in good agreement with most of the theoretical models. The estimated activation volume for gamma uranium seems to indicate a vacancy mechanism.The results on aluminium for both self and impurity diffusion agree quite well with Friedel's theoretical predictions. [French] Pour preciser la structure des lacunes, on a, par des etudes de diffusion sous haute pression determine les volumes d'activation correspondant a l'autodiffusion dans des metaux de structure cubique face centree: argent, or, cuivre et aluminium et dans un metal de structure cubique centree: l'uranium gamma. On a egalement determine les volumes d'activation pour l'heterodiffusion des metaux nobles dans l'aluminium. Les resultats obtenus pour l'or, l'argent et le cuivre sont en accord avec la plupart des modeles theoriques classiques. Le volume d'activation d'autodiffusion evalue pour l'uranium gamma est compatible avec une diffusion par lacune. Les resultats concernant l'aluminium et l'heterediffusion des metaux nobles dans l'aluminium verifient assez bien les previsions theoriques de Friedel. (auteur)

  10. Thermal fatigue cracking of austenitic stainless steels; Fissuration en fatigue thermique des aciers inoxydables austenitiques

    Energy Technology Data Exchange (ETDEWEB)

    Fissolo, A

    2001-07-01

    This report deals with the thermal fatigue cracking of austenitic stainless steels as AISI 316 LN and 304 L. Such damage has been clearly observed for some components used in Fast Breeder reactors (FBR) and Pressure Water Reactor (PWR). In order to investigate thermal fatigue, quasi-structural specimen have been used. In this frame, facilities enforcing temperature variations similar to those found under the operation conditions have been progressively developed. As for components, loading results from impeded dilatation. In the SPLASH facility, the purpose was to establish accurate crack initiation conditions in order to check the relevance of the usual component design methodology. The tested specimen is continuously heated by the passage of an electrical DC current, and submitted to cyclic thermal down shock (up to 1000 deg C/s) by means of periodical spraying of water on two opposite specimen faces. The number of cycles to crack initiation N{sub i} is deduced from periodic examinations of the quenched surfaces, by means of optical microscopy. It is considered that initiation occurs when at least one 50{mu}m to 150{open_square}m long crack is observed. Additional SPLASH tests were performed for N >> N{sub i}, with a view to investigate the evolution of a surface multiple cracking network with the number of cycles N. The CYTHIA test was mainly developed for the purpose of assessing crack growth dynamics of one isolated crack in thermal fatigue conditions. Specimens consist of thick walled tubes with a 1 mm circular groove is spark-machined at the specimen centre. During the test, the external wall of the tube is periodically heated by using a HF induction coil (1 MHz), while its internal wall is permanently cooled by flowing water. Total crack growth is derived from post-mortem examinations, whereby the thermal fatigue final rupture surface is oxidized at the end of the test. The specimen is broken afterwards under mechanical fatigue at room temperature. All the

  11. Fatigue

    Science.gov (United States)

    ... to help you find out what's causing your fatigue and recommend ways to relieve it. Fatigue itself is not a disease. Medical problems, treatments, and personal habits can add to fatigue. These include Taking certain medicines, such as antidepressants, ...

  12. The use of radioactive inserts in the study of metal deformation during tube-making processes; Emploi de fils metalliques radioactifs pour l'etude des deformations des metaux pendant la fabrication de tubes; Ispol'zovanie radioaktivnykh vtulok dlya izucheniya deformatsii metallov pri protsesse izgotovleniya trub; Empleo de insertos radiactivos en el estudio de la deformacion de los metales durante la fabricacion de tubos

    Energy Technology Data Exchange (ETDEWEB)

    Davison, W H.T. [Tube Investments Research Laboratories, Cambridge (United Kingdom)

    1962-01-15

    foree; les courbes isoactives montrent les deformations du fil radioactif dans la direction normale a la surface du tube. Un examen analogue d'une section perpendiculaire a l'axe du tube dorme un deuxieme diagramme; en combinant les deux diagrammes, on obtient une representation a trois dimensions. Les auteurs du memoire mentionnent quelques resultats obtenus, mais ile s'attachent surtout a exposer la technique experimentale qui trouve une application tres etendue dans l'etude de la deformation des metaux. Le fil metallique radioactif doit etre localise a un millimetre pres, ce qui exige un pouvoir de resolution superieur a celui qui est normalement necessaire pour les explorations medicales au moyen de radioisotopes. Les auteurs analysent l'influence de l'energie y, de la construction du collimateur et de la discrimination energetique sur les problemes a resoudre pour obtenir ce pouvoir de resolution. (author) [Spanish] La memoria informa sobre el empleo de insertos radiactivos en la investigacion de las deformaciones del acero durante la fabricacion de tubos por punzonado rotatorio en caliente. Se irradian en el reactor alambres de hierro o de acero y se insertan en orificios tubulares taladrados en tochos de los mismos materiales, que luego son tratados con arreglo a metodos normales de produccion. Un monitoraje meticuloso demuestra que se pueden despreciar el grado de exposicion a las radiaciones y la contaminacion de la planta. Una vez frios, se exploran los tochos en el laboratorio, utilizando un contador de centelleo con colimador, montado perpendicularmente a la superficie del tocho perforado. Las curvas isodosicas indican la configuracion del inserto deformado en un plano perpendicular a la superficie del tubo. Una exploracion similar de un corte perpendicular al eje del tubo da un segundo diagrama; combinando los dos diagramas se obtiene una representacion tridimensional. Se indican algunos resultados, pero la memoria trata principalmente de la tecnica

  13. Electronic specific heat of transition metal carbides; Chaleur specifique electronique de carbures de metaux de transition

    Energy Technology Data Exchange (ETDEWEB)

    Conte, R [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1964-07-15

    The experimental results that make it possible to define the band structure of transition metal carbides having an NaCI structure are still very few. We have measured the electronic specific heat of some of these carbides of varying electronic concentration (TiC, either stoichiometric or non-stoichiometric, TaC and mixed (Ti, Ta) - C). We give the main characteristics (metallography, resistivity, X-rays) of our samples and we describe the low temperature specific heat apparatus which has been built. In one of these we use helium as the exchange gas. The other is set up with a mechanical contact. The two use a germanium probe for thermometer. The measurement of the temperature using this probe is described, as well as the various measurement devices. The results are presented in the form of a rigid band model and show that the density of the states at the Fermi level has a minimum in the neighbourhood of the group IV carbides. (author) [French] Les donnees experimentales permettant de preciser la structure de bandes des carbures de metaux de transition de structure NaCI sont encore peu.nombreuses. Nous avons mesure la chaleur specifique electronique de certains de ces carbures, de differentes concentrations electroniques (TiC stoechiometrique ou non, TaC et mixtes (Ti, Ta) - C). Nous donnons les principales caracteristiques (metallographie, resistivite, rayon X), de nos echantillons, et nous decrivons l'appareillage de chaleur specifique a basse temperature realise. Dans l'un nous utilisons l'helium comme gaz d'echange. L'autre est monte avec un contact mecanique. Les deux utilisent une sonde au germanium comme thermometre. La mesure de la resistance de cette sonde est decrite, ainsi que les differents montages de mesure. Les resultats, presentes dans un modele de bande rigide, font apparaitre que la densite des etats au niveau de Fermi presente un minimum au voisinage des carbures du groupe IV. (auteur)

  14. Influence of a hydrostatic pressure on the diffusion in metals having a cubic structure; Contribution a l'etude de l'influence de la pression hydrostatique sur la diffusion dans les metaux cubiques

    Energy Technology Data Exchange (ETDEWEB)

    Beyeler, M. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1969-07-01

    In view of obtaining informations on the structure of vacancies. We have determined, by diffusion experiments under high pressure, the activation volumes for self diffusion in different face centered cubic metals: silver, gold, copper, aluminium and in body centered cubic uranium (gamma phase). Activation volumes for noble metals diffusion in aluminium have also been investigated. The experimental results on gold, silver and copper are in good agreement with most of the theoretical models. The estimated activation volume for gamma uranium seems to indicate a vacancy mechanism.The results on aluminium for both self and impurity diffusion agree quite well with Friedel's theoretical predictions. [French] Pour preciser la structure des lacunes, on a, par des etudes de diffusion sous haute pression determine les volumes d'activation correspondant a l'autodiffusion dans des metaux de structure cubique face centree: argent, or, cuivre et aluminium et dans un metal de structure cubique centree: l'uranium gamma. On a egalement determine les volumes d'activation pour l'heterodiffusion des metaux nobles dans l'aluminium. Les resultats obtenus pour l'or, l'argent et le cuivre sont en accord avec la plupart des modeles theoriques classiques. Le volume d'activation d'autodiffusion evalue pour l'uranium gamma est compatible avec une diffusion par lacune. Les resultats concernant l'aluminium et l'heterediffusion des metaux nobles dans l'aluminium verifient assez bien les previsions theoriques de Friedel. (auteur)

  15. Fatigue

    Science.gov (United States)

    ... sleep. Fatigue is a lack of energy and motivation. Drowsiness and apathy (a feeling of not caring ... Call your provider right away if you have any of the following: Confusion or dizziness Blurred vision Little or no urine, or recent ...

  16. Territory of Upper Volta. Interest and Programme of Prospecting for Radioactive Metals; Territoire de la Haute-Volta. Interet et Programme d'une Prospection pour Metaux Radioactifs

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1958-04-15

    The costs of a programme for prospecting for radioactive metals (esp. Uranium) can amount to a total cost of the order of 600 to 700 millions FF over 10 years. Such a programme represents a rather high risk, because in order to succeed, a reserve capable to pay for the programme must be found in the foreseen period. The first part of the report describes the Uranium reserves already known in Africa. [French] Un programme de prospection pour metaux radioactifs (notamment l'Uranium) pourrait etaler des depenses totales de l'ordre de 600 a 700 millions FF sur 10 ans. Un tel programme represente un risque assez grand, puisque pour reussir, il faut trouver dans le delai envisage, et avec les moyens prevus, un gisement capable d'amortir une telle depense. Une premiere partie du rapport expose les caracteres des gisments d'Uranium actuellement connus en Afrique.

  17. A Survey of Serious Aircraft Accidents Involving Fatigue Fracture. Volume 2. Rotary-Wing Aircraft (Etude sur des Accidents Importants d’Avions du aux Effets des Fractures de Fatigue. Volume 2. Effets sur des Helicopteres).

    Science.gov (United States)

    1983-04-01

    Convention on International Civil Aviation, Second Edition , March 1966. 5. WORLD AIRLINE ACCIDENT SUMMARY. Civil Aviation Authority, (Great Britain...people who either provided information, or who suggested other sources of information for the current edition of this survey. E.M.R. Alexander Civil...Waverley, New Zealand. F-28C Tail rotor drive shaft. Fatigue strength reduc- ed by softened condition & surface decarbur- isation. AISA 4130 steel. Ref: NZ

  18. Study of reactions of metals with sulphur and phosphorus compounds by pulsed temperatures; Etude des reactions entre metaux et composes du soufre et du phosphore au moyen de brusques hausses de temperature; Issledovanie reaktsii metallov s soedineniyami sery i fosfora pri regulyarnykh izmeneniyakh temperatury; Estudio de reacciones entre metales y compuestos de azufre y de fosforo empleando impulsos de temperatura

    Energy Technology Data Exchange (ETDEWEB)

    Campbell, R B; Grunberg, L [National Engineering Laboratory, East Kilbride, Glasgow (United Kingdom)

    1962-01-15

    The anti-wear action of sulphur and phosphorus compounds which are usually added to gear-oils depends on chemical reactions with the metallic surfaces of the gears. These reactions occur both at the bulk oil temperature (approx. 100 Degree-Sign C) and during high temperatures (approx. 600 Degree-Sign C) of short duration when the gearteeth come into contact under lead. The temperature flashes were simulated in an apparatus in which short pulses of electric current were used to heat metal wires immersed in mineral oil containing S{sup 35} and P{sup 32} labelled compounds in solution. The radioactivity acquired by the wires was measured. The extent of the reactions was determined as a function of temperature and time and the results were interpreted in terms of conventional kinetic laws. The modification of the reaction rates by the presence of other compounds in the solution was studied. The effect of pre-formed surface films containing sulphur phosphorus, chlorine and/or oxygen was also determined. In explaining the results, the structure of the materials used and the diffusion processes whereby the reactions occur beyond the initial stages were considered. (author) [French] Les composes du soufre et du phosphore que l'on ajoute souvent aux huiles de graissage offrent une protection contre l'usure, mais cette protection depend des reactions chimiques avec les surfaces metalliques des engrenages. Ces reactions ont lieu aussi bien a la temperature de la masse de l'huile (environ 100 Degree-Sign C) qu'au moment des brusques hausses de temperature (environ 600 Degree-Sign C) qui se produisent lorsque les dents d'engrenage viennent en contact avec pression. Les chocs thermiques ont ete simules dans un appareil a l'interieur duquel on a produit de breves impulsions de courant electrique pour chauffer des fils metalliques immerges dans une huile minerale contenant des composes marques au soufre-35 et au phosphore-32 en solution. Les auteurs ont mesure la radioactivite

  19. Study of inclusions and segregation in metals by autoradiography; Etude autoradiographic des inclusions et de la segregation dans les metaux; Izuchenie primesej i usadki metalla s pomoshch'yu avtoradiografii; Estudio autoradiografico de las inclusiones y de la segregacion en los metales

    Energy Technology Data Exchange (ETDEWEB)

    Makin, S M [Wantage Research Laboratory, Wantage, Berks (United Kingdom)

    1962-01-15

    Three applications of radioisotope techniques to metallurgy are described. During the course of this work, new autoradiographic techniques are developed. These include the irradiation and autoradiography of extraction replicas, similar to those used in electron microscopy, and a two-colour dye-transfer process in which colour prints of autoradiographs are shown with the corresponding micrographs superposed. These methods are applied to the study of inclusions in steel and uranium and to an investigation of the segregation of sulphur and phosphorus in welds in stainless steel. (author) [French] Le memoire decrit trois applications des radioisotopes en metallurgie. Au cours de ces travaux, l'auteur a mis au point de nouvelles techniques d'autoradiographie. Celles-ci comportent l'irradiation d'empreintes pour autoradiographie et d'empreintes d'extraction, semblables a celles qui sont employees dans la microscopie electronique, et font appel a un procede de transfert en deux couleurs dans lequel on superpose des autoradiographies en couleur et les microphotographies correspondantes. Ces methodes sont appliquees a l'etude des inclusions dans l'acier et l'uranium ainsi qu'aux recherches sur la segregation du soufre et du phosphore dans les pieces soudees en acier inoxydable. (author) [Spanish] Se describen tres aplicaciones de las tecnicas de los radioisotopes en la metalurgia. En el curso de los experimentos se han perfeccionado nuevas tecnicas autorradiograficas, que comprenden la irradiacion de replicas de autorradiografia y extraccion, analogas a las utilizadas en la microscopia electronica y un procedimiento de impresion a dos colores que permite obtener autorradiografias superpuestas a las correspondientes micrografias. Estos metodos se aplican al estudio de inclusiones en el acero y el uranio y a una investigacion de la segregacion del azufre y del fosforo en soldaduras hechas en acero inoxidable. (author) [Russian] Daetsya opisanie trekh sposobov primeneniya

  20. Fatigue-creep of martensitic steels containing 9-12% Cr: behaviour and damage; Fatigue-fluage des aciers martensitiques a 9-12% Cr: comportement et endommagement

    Energy Technology Data Exchange (ETDEWEB)

    Fournier, B

    2007-09-15

    It is in the framework of the research programs on nuclear reactors (generation IV) that the martensitic steels containing 9-12% Cr are studied by the CEA. Most of the structures for which they are considered will be solicited in fatigue-creep at high temperature (550 C). The aim of this work is to understand and model the cyclic behaviour and the damage of these materials. The proposed modelling are based on detailed observations studies (SEM, TEM, EBSD...). The cyclic softening is attributed to the growth of the microstructure. A micro-mechanical model based on the physical parameters is proposed and leads to encouraging results. The damage results of interactions between fatigue, creep and oxidation. Two main types of damage are revealed. A model of anticipation of service time is proposed and gives very satisfying results. The possible extrapolations are discussed. (O.M.)

  1. French experience in transient data collection and fatigue monitoring of PWR`s nuclear steam supply system; Experience francaise sur la comptabilisation des transitoires et la surveillance en fatigue des chaudieres REP

    Energy Technology Data Exchange (ETDEWEB)

    Sabaton, M.; Morilhat, P.; Savoldelli, D.; Genette, P.

    1995-10-01

    Electricite de France (EDF), the french national electricity company, is operating 54 standardized pressurizer water reactors. This about 500 reactor-years experience in nuclear stations operation and maintenance area has allowed EDF to develop its own strategy for monitoring of age-related degradations of NPP systems and components relevant for plant safety and reliability. After more than fifteen years of experience in regulatory transient data collection and seven years of successful fatigue monitoring prototypes experimentation, EDF decided to design a new system called SYSFAC (acronym for SYsteme de Surveillance en FAtigue de la Chaudiere) devoted to transient logging and thermal fatigue monitoring of the reactor coolant pressure boundary. The system is fully automatic and directly connected to the on-site data acquisition network without any complementary instrumentation. A functional transient detection module and a mechanical transient detection module are in charge of the general transient data collection. A fatigue monitoring module is aimed towards a precise surveillance of five specific zones particularly sensible to thermal fatigue. After the first step of preliminary studies, the industrial phase of the SYSFAC project is currently going on, with hardware and software tests and implementation. The first SYSFAC system will be delivered to the pilot power plant by the beginning of 1996. The extension to all EDF`s nuclear 900 MW is planned after one more year of feedback experience. (authors). 12 refs., 3 figs.

  2. Etude de la concentration des metaux traces chez "Hexaplex trunculus " (muricidae) le long du littoral tunisien

    OpenAIRE

    Tissaoui, Ch.; Chouba, L.; El Abed, O.

    2008-01-01

    La Tunisie dispose d’une ressource importante en coquillages, plusieurs espèces sont commercialisées et elles ont fait l’objet de programmes de qualité pour la sauvegarde de la santé humaine. Dans ce contexte, nous avons réalisé un suivi saisonnier de la concentration de trois métaux traces toxiques, le cadmium (Cd), le plomb (Pb), et le mercure (Hg) dans la totalité de la masse molle, dans le pied et dans les viscères d’un Mollusque Gastéropode, l’Hexaplex trunculus communément appelé en Tun...

  3. Photothermal radiometry applied to characterization and control of thermal contact resistance of crimped metals; Radiometrie photothermique appliquee a la caracterisation et au controle de la resistance thermique de contact de metaux sertis

    Energy Technology Data Exchange (ETDEWEB)

    Van Schel, Etienne

    1989-11-15

    Modulated photothermal radiometry is used to study the thermal contact between two metals. At first, two models using a bidimensional axisymmetric geometry are proposed to describe the interface: the first one deals with thermal contact resistance, the second one with an equivalent layer. A thorough calculation of the photothermal signal taking into account the nature of the sample and the detection is here presented. Theoretical simulations show the influence of several parameters (frequency. dimensions of the excitation and the detection) on the sensitivity of the method applied to the detection of the thermal resistance. The comparison, with a three layer-model justifies the use of thermal resistance in periodical regime, for air layers between metals. Then, we present an experimental device that is used to validate the model. The results, obtained on duralumin-copper samples, show the sensitivity of the method and lead us to propose values of thermal contact resistance for different crimpings. At last an industrial testing equipment is described. The results, obtained on laboratory samples, are confirmed. Heat exchanger pipes, including voluntary defects are tested. Thanks to this device, we are able to make an in situ crimping control that can also be applied to other types of contacts. [French] La radiometrie photothermique est utilisee pour etudier le contact thermique entre deux metaux. Tout d'abord, deux modeles utilisant une geometrie bidimensionnelle axisymetrique sont proposes pour decrire l'interface: le premier utilise une resistance thermique de contact, le second un milieu equivalent Un calcul complet du signal photothermique, prenant en compte la nature de l'echantillon et de la detection, est presente. Des simulations theoriques montrent l'influence de quelques parametres (frequence, dimensions de l'excitation et de la detection) sur la sensibilite de la methode a la detection de la resistance thermique. La comparaison, avec un modele a trois

  4. Study of the pair-interaction function in some normal metals; Etude de l'interaction de paire dans quelques metaux normaux

    Energy Technology Data Exchange (ETDEWEB)

    Pick, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1965-06-01

    The pair interaction function has been derived for the following metals: Li, Na, K, Al. It is obtained via a second order perturbation expansion of the wave functions of the conduction electrons using a self-consistent pseudo-potential. Exchange and correlations between those electrons have been ignored. Such an interaction is only valid at constant volume and depends on a single experimental parameter, namely the ionic volume. Its main features are a pronounced minimum in the vicinity of the nearest neighbours, especially marked in alkaline metals, and an asymptotic decrease of the form cos(2k{sub F}r)/r{sup 3}. This interaction gives the correct crystalline structure of these metals at 0 K as well as a good approximation of the phonon spectrum of an alkaline. The validity of the perturbation technique is discussed. We prove that the pair interaction function is correctly given to second order in the pseudo-potential despite the various approximations and errors involved by such a method. (author) [French] L'interaction de paire effective entre ions a ete calculee dans les metaux Li, Na, K et Al. Elle est obtenue par un developpement en serie de perturbation des fonctions d'onde des electrons de conduction. Le developpement est pousse au deuxieme ordre et utilise un pseudo-potentiel self-consistant. Les phenomenes d'echange et de correlations entre ces electrons ont ete negliges. L'interaction calculee n'a de sens qu'a volume constant. Elle depend d'un seul parametre experimental, le volume ionique. Elle se caracterise par un minimum prononce de l'energie de paire pour les proches voisins, surtout marque chez les alcalins. Elle decroit asymptotiquement en cos(2k{sub F}r)/r{sup 3}. Elle permet de predire la structure cristalline la plus stable a 0 K; elle donne le spectre de phonons des alcalins avec une assez bonne precision. Par ailleurs, la validite de la methode de perturbation du deuxieme ordre est discutee. On montre qu'elle donne correctement l

  5. Influence of hydrogen on metals behavior. 1 - Mechanical behavior of Ti 6 pc Al 6 pc V 2 pc Sn titanium alloy versus hydrogen: influence of heat treatment and of oxygen content; Influence de l'hydrogene sur le comportement des metaux. 1 - comportement mecanique de l'alliage de titane T A6 V6 E2 vis-a-vis de l'hydrogene: influence du traitement thermique et de la teneur en oxygene

    Energy Technology Data Exchange (ETDEWEB)

    Schaller, Bernard

    1972-06-26

    The mechanical behavior of Ti 6 pc Al 6 pc V Sn alloy during dynamic testing has been investigated versus hydrogen and oxygen content. The hydrogen susceptibility depends only slightly on its microstructure, acicular or equi-axed: it depends much more on conditions of hydrogen contamination and on the thermal history afterward. When the alloy has been stabilized by annealing in {alpha} - {beta} and provided hydrogen absorption does not induce phase transformations, hydrogen sensitivity is relatively low: brittleness occurs suddenly but at a high concentration threshold (2000 ppm H), which coincides with hydrogen saturation of {beta} phase. When the alloy includes unstabilized phases, its response to hydrogen changes whether it has been finally annealed or not, in the 300 - 500 C temperature area, prone to {omega} phase formation. In the absence of such an annealing, a reduction in ductility only occurs at high concentrations (> 1500 ppm H). In the other and, after annealing at 400 C, alloy hardening and a ductility decrease start even at the lowest hydrogen amounts: then hydrogen susceptibility is very high. Low oxygen concentration (up to 2000 ppm) do not sensibly affect the good hydrogen tolerance of this alloy. Beyond 2500 ppm, oxygen, while improving tensile strength, yet severely decreases ductility. [French] Le comportement mecanique de l'alliage TA6-V6-E2 lors d'un essai dynamique a ete etudie en fonction de la teneur en hydrogene et en oxygene. La sensibilite vis-a-vis de l'hydrogene ne depend que tres faiblement de sa structure migrographique, aciculaire ou equiaxe; elle depend bien plus des conditions de contamination par l'hydrogene et de son histoire thermique apres contamination. Lorsque l'alliage a ete stabilise par un recuit dans le domaine biphase, et a condition que l'absorption d'hydrogene n'entraine pas de modification structurale, la sensibilite vis-a-vis de l'hydrogene est relativement faible: la fragilite apparait brutalement mais pour un

  6. Some Applications of Short-Lived Radioisotopes in the Study of Metals; Applications Diverses des Radioelements de Courte Periode dans l'Etude des Metaux; РАЗЛИЧНЫЕ ПРИМЕНЕНИЯ КОРОТКОЖИВУЩИХ РАДИОЭЛЕМЕНТОВ ПРИ ИССЛЕДОВАНИЯХ МЕТАЛЛОВ; Aplicaciones de los Radioelementos de Periodo Corto en el Estudio de los Metales

    Energy Technology Data Exchange (ETDEWEB)

    Kohn, A. [Institut de Recherches de la Siderurgie, Saint-Germain-en-Laye (France)

    1963-03-15

    periode pour des etudes de natures diverses effectuees sur les metaux. Une technique simple d'analyse par activation a ete mise au point pour doser le lanthane dans des aciers ayant recu une faible addition de mischmetall au cours de leur fusion. Une etude se proposait d'examiner comment se comportaient les faibles quantites d'arsenic presentes dans le fer au cours de l'oxydation de ce metal. Un enrichissement important de l'arsenic a l'interface du metal et de l'oxyde a tout d'abord ete mis en evidence par autoradiographie. Grace a l'emploi d'une technique consistant a activer les echantillons oxydes dans un reacteur nucleaire et a dissoudre des couches successives de quelques microns d'epaisseur, il a ete possible d'etudier quantitativement le phenomene. On a pu ainsi verifier que l'arsenic se concentrait dans le metal, au voisinage de l'interface, ou sa concentration pouvait atteindre 30 a 40 fois la teneur initiale de l'alliage. L'etude de la croissance des cristaux metalliques a ete realisee par autoradiographie en utilisant le fait que le solide est plus pauvre en elements d'alliage que le liquide a partir duquel il prend naissance. Elle a porte sur des alliages aluminium-cuivre refroidis lentement, puis trempes en cours de solidification; elle a permis de mettre en evidence la configuration des cristaux metalliques a divers stades de leur croissance, et de relier la progression de la solidification a la variation de temperature de l'alliage, mesuree par un thermo* couple. L'etude des courants de convection dans les gros lingots de forge avait pour but de confirmer l'existence de courants de convection importants dans les lingots de forge. Les essais ont ete realises en introduisant une petite quantite d'or-198 a divers moments apres la fin de la coulee dans des lingots de 4 t ainsi que dans des lingots de 30 a 60 t. On a pu voir qu'une partie importante de ces gros lingots etait encore le siege de courants de convection suffisants, pour repartir l'or dans un volume

  7. Probabilistic and microstructural aspects of fatigue cracks initiation in Inconel 718; Aspects probabilistes et microstructuraux de l'amorcage des fissures de fatigue dans l'alliage INCO 718

    Energy Technology Data Exchange (ETDEWEB)

    Alexandre, F

    2004-03-15

    Thermomechanical treatments have been recently developed to produce Inconel 718DA (Direct Aged). This alloy optimisation leads to an increase of the fatigue life but also the scatter. The aim of this study is on the one hand the understanding of the fatigue crack initiation mechanisms and on the other hand the modelling of the fatigue life and the scatter. An experimental study showed that the fatigue cracks were initiated from carbide particles in fine grain alloy. Interrupted tensile tests show that the particles cracking occurred at the first quarter of the fatigue cycle. Fatigue behaviour tests were also performed on various grain size 718 alloys. The last experimental part was devoted to measurements of the low cycle fatigue crack growth rates using a high focal distance microscope. For these tests, EDM micro-defects were used for the fatigue crack initiation sites. This method was also used to observe the small fatigue crack coalescence. A fatigue life model is proposed. It is based on the three fatigue crack initiation mechanisms competition: particle crack initiation on the surface, internal particle crack initiation and Stade I crack initiation. The particle fatigue crack initiation is supposed instantaneous at a critical stress level. The Tanaka and Mura model is used for analysing the Stage I crack initiation number of cycles. The fatigue crack growth rate was analysed using the Tomkins model identified on the small fatigue crack growth rate measurements. The proposed fatigue life model decomposed in three levels: a deterministic one and two probabilistic with and without crack coalescence. (author)

  8. Bois-Noirs ore. Recovery of uranium of solutions from acid treatment. Results of industrial tests at the Gueugnon plant; Minerai des Bois-Noirs. Recuperation de l'uranium des solutions d'attaques acides. Resultats des essais industriels effectues a l'usine de Gueugnon

    Energy Technology Data Exchange (ETDEWEB)

    Le Bris, J

    1959-04-01

    Industrial-scale tests are reported of the efficiency of two recovery processes for the separation of uranium from sulfuric acid pickling solutions used on ore from Bois-Noirs, at the Gueugnon works. The final stage of each process is sodium uranate. The earlier part of the report deals with tests of the separation of uranium from foreign metals by fractional precipitation. The second part deals with the separation of uranium from these metals by carbonation of the solutions. (author) [French] Le present rapport concerne les essais industriels de deux procedes de recuperation de l'uranium de solutions d'attaque sulfurique du minerai des Bois-Noirs a l'usine de Gueugnon. Le stade final pour ces deux procedes etant l'uranate de sodium, une premiere partie est consacree aux essais de separation de l'uranium des metaux etrangers par precipitation fractionnee; une deuxieme partie est consacree aux essais de separation de l'uranium des metaux etrangers par carbonatation des solutions d'attaque du minerai. (auteur)

  9. Contribution to the theoretical study of the thermal diffusion of point defects in metals; Contribution a l'etude theorique et experimentale de la thermodiffusion de defauts ponctuels dans les metaux

    Energy Technology Data Exchange (ETDEWEB)

    Gerl, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1968-01-01

    An experimental study of diffusion under a thermal gradient shows that the heat of transport Q-bar* for self-diffusion in the noble metals is very low (a few hundredths of I eV) and relatively large in Fe{alpha} (+ 1,7 {+-} 0,8 eV). The apparent heat of transport of Sb in Cu, measured by the 'thin layer technique' is -0.21 {+-}0,05 eV.The influence of the density of sources and sinks of vacancies on the observed vacancy flux is determined by a calculation involving the thermodynamics of irreversible processes; when the mean distance between sources and sinks is larger than a certain limiting value, the vacancy flux vanishes.The contribution to the heat of transport of electron-defect (q*e) and phonon-defect (q*p) collisions is calculated using a semi-classical approach and by a quantum mechanical method; q*e is related to the resistivity {delta} -{rho}{sub d} and to the thermoelectric power of the defect at its stable position and at its saddle-point. A relation between q*e and the effective valency Z* of the defect allows a determination of {delta}{sub {rho}}{sub d} at the saddle-point. Numerical values of q*e are given for some impurities in noble metals. (author) [French] L'etude experimentale de la diffusion sous gradient de temperature montre que la chaleur de transport d'autodiffusion des metaux nobles est tres faible (quelques centiemes d'eV), alors que celle de Fe{alpha} est relativement elevee (+1,7 {+-} 0,8 eV). La chaleur de transport apparente de Sb dans Cu, mesuree par la technique de la couche mince, est (-0.21 {+-} 0.05 eV). L'influence de la densite de sources et puits de lacunes sur le flux de lacunes observe est determinee en appliquant le formalisme de la thermodynamique des processus irreversibles; si la distance moyenne entre sources et puits excede une certaine valeur limite, le flux de lacunes devient pratiquement nul. La contribution des chocs electrons-defaut (q*e) et phonons-defaut (q*p) a la chaleur de transport,est calcul theoriquement a

  10. Contribution to the theoretical study of the thermal diffusion of point defects in metals; Contribution a l'etude theorique et experimentale de la thermodiffusion de defauts ponctuels dans les metaux

    Energy Technology Data Exchange (ETDEWEB)

    Gerl, M. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1968-01-01

    An experimental study of diffusion under a thermal gradient shows that the heat of transport Q-bar* for self-diffusion in the noble metals is very low (a few hundredths of I eV) and relatively large in Fe{alpha} (+ 1,7 {+-} 0,8 eV). The apparent heat of transport of Sb in Cu, measured by the 'thin layer technique' is -0.21 {+-}0,05 eV.The influence of the density of sources and sinks of vacancies on the observed vacancy flux is determined by a calculation involving the thermodynamics of irreversible processes; when the mean distance between sources and sinks is larger than a certain limiting value, the vacancy flux vanishes.The contribution to the heat of transport of electron-defect (q*e) and phonon-defect (q*p) collisions is calculated using a semi-classical approach and by a quantum mechanical method; q*e is related to the resistivity {delta} -{rho}{sub d} and to the thermoelectric power of the defect at its stable position and at its saddle-point. A relation between q*e and the effective valency Z* of the defect allows a determination of {delta}{sub {rho}}{sub d} at the saddle-point. Numerical values of q*e are given for some impurities in noble metals. (author) [French] L'etude experimentale de la diffusion sous gradient de temperature montre que la chaleur de transport d'autodiffusion des metaux nobles est tres faible (quelques centiemes d'eV), alors que celle de Fe{alpha} est relativement elevee (+1,7 {+-} 0,8 eV). La chaleur de transport apparente de Sb dans Cu, mesuree par la technique de la couche mince, est (-0.21 {+-} 0.05 eV). L'influence de la densite de sources et puits de lacunes sur le flux de lacunes observe est determinee en appliquant le formalisme de la thermodynamique des processus irreversibles; si la distance moyenne entre sources et puits excede une certaine valeur limite, le flux de lacunes devient pratiquement nul. La contribution des chocs electrons-defaut (q*e) et phonons-defaut (q*p) a la chaleur de

  11. Preparative Radiation Chemistry of Transition Metal Complexes; Radiosynthese de complexes de metaux de transition; Radiatsionno-khimicheskij sintez kompleksnykh soedinenij perekhodnykh metallov; Radiosintesis de complejos de los metales de transicion

    Energy Technology Data Exchange (ETDEWEB)

    Gustorf, E. Koerner Von; Jun, M. -J.; Koller, H.; Schenck, G. O. [Max-Planck-Institut fuer Kohlenforschung, Abteilung Strahlenchemie, Muelheim-Ruhr, Federal Republic of Germany (Germany)

    1963-11-15

    {pi}-complexes and carbonyl compounds of transition metals have a technical importance because of their special reactivity and catalytic activity. The following investigations have been made by us: 1. Radiation chemical synthesis of transition metal {pi}- complexes Examples are the preparation of maleic-acid-anhydride-iron-tetracarbonyl, fumaric-acid-dimethylesteriron- tetracarbonyl, methacrylic-acid-methylester-iron-tetracarbonyl, vinylacetate-iron-tetiacarbonyl, etc. by Co{sup 60} {gamma}-irradiation of Fe(CO){sub 5} and the corresponding unsaturated compounds. 2. Chemical reactions with radiation-chemically formed {pi}-complexes Examples are the polymerization of vinyl compounds at room temperature by the action of organic halogen compounds on complexes such as methacryl-acid-methylester-iron-tetracarbonyl, vinylacetate-iron- tetracarbonyl, etc. 3. Synthesis of {pi}-complexes and carbonyl compounds of transition metals by irradiation Examples are the Co{sup 60} {gamma}-irradiation of [(C{sub 5}H{sub 5}){sub 2}Fe], [(C{sub 5}H{sub 5}){sub 2N}i], CH{sub 3}C{sub 5}H{sub 4}Mn(CO){sub 3}, (C{sub 5}H{sub 5})TiCl{sub 2},Fe(CO){sub 5}, Ni(CO){sub 4} , in halogen hydrocarbons. (author) [French] Les complexes {pi} et les composes carbonyles des metaux de transition ont une importance du point de vue technique en raison de leur reactivite speciale et de leur activite catalytique. L'auteur a fait des experiences sur les questions suivantes: 1. Radiosynthese de complexes {pi} de metaux de transition. Exemple: preparation d'anhydride maleique-fer tetracarbonyle, de fumarate de dimethyle-fer tetracarbonyle, de methacrylate de methyle-fer tetracarbonyl, d'acetate de vinyle-fer tetracarbonyle, etc., par exposition de Fe(CO){sub 5} et des composes non satures correspondant aux rayons gamma du cobalt-60. 2. Reactions chimiques avec des complexes n formes par voie radiochimique. Exemple: polymerisation de composes vinyliques a temperature ambiante en presence de composes organiques

  12. Phytoremediation of heavy metals and hydrocarbon contaminated soils; Phytoremediation des sols contamines aux metaux lourds et aux hydrocarbures recalcitrants

    Energy Technology Data Exchange (ETDEWEB)

    Leblanc, R.; Chateauneuf, G.; Sura, C. [Inspec-Sol Inc., Montreal, PQ (Canada); Labrecque, M.; Galipeau, C. [Jardin botanique de Montreal, Montreal, PQ (Canada). Institut de Recherche en Biologie Vegetale; Greer, C.; Delisle, S.; Roy, S.; Labelle, S. [National Research Council of Canada, Montreal, PQ (Canada). Inst. for Research in Biotechnology

    2003-07-01

    Phytoremediation is a technology that uses plants to decontaminate soils and underground water. Inspec-Sol, a company located in Montreal, Quebec, conducted a two-year study to evaluate the decontamination capabilities of this technology. Trials in greenhouses and field studies at the Pitt Park along the Lachine Canal were conducted. The soils chosen for the studies were soils with concentrations of polycyclic aromatic hydrocarbons (PAH) and heavy metals (lead, copper, zinc) higher than those prescribed for the safe utilization of soils. The trials identified the three plant species (Salix viminalis, Brassica juncea, and Festuca arundinacea) which had the best characteristics for phytoremediation. Controlled experiments were performed to optimize the technology to achieve the maximum extraction of contaminant. It was concluded that phytoremediation has potential for the remediation of urban soils contaminated with organic and inorganic pollutants.

  13. Equations of state of heavy metals: ab initio approaches; Equations d'etat des metaux lourds: approches ab initio

    Energy Technology Data Exchange (ETDEWEB)

    Bernard, S.; Jollet, F.; Jomard, G.; Siberchicot, B.; Torrent, M.; Zerah, G.; Amadon, B.; Bouchet, J.; Richard, N.; Robert, G. [CEA Bruyeres-le-Chatel, 91 (France)

    2005-07-01

    The determination of equations of states of heavy metals through ab initio calculation, i.e. without any adjustable parameter, allows to access to pressure and temperature thermodynamic conditions sometimes inaccessible to experiment. To perform such calculations, density functional theory (DFT) is a good starting point: when electronic densities are homogeneous enough, the local density approximation (LDA) remarkably accounts for thermodynamic properties of heavy metals, such as tantalum, or the light actinides, as well for static properties - equilibrium volume, elastic constants - as for dynamical quantities like phonon spectra. For heavier elements, like neptunium or plutonium, relativistic effects and strong electronic interactions must be taken into account, which requires more sophisticated theoretical approaches. (authors)

  14. Influence of the anisotropy of expansion coefficients on the elastic properties of uranium of zirconium and of zinc; Influence de l'anisotropie des coefficients de dilatation sur les proprietes elastiques de l'uranium du zirconium et du zinc

    Energy Technology Data Exchange (ETDEWEB)

    Calais, Daniel; Saada, Georges; Simenel, Nicole [Commissariat a l' energie atomique et aux energies alternatives - CEA (France)

    1959-07-01

    The anisotropy of the expansion coefficients of uranium, zirconium and zinc provoke internal tensions in the course of cooling these metals. These tensions are eliminated in the case of zinc by restoration to room temperature, but persist in uranium and zirconium and are responsible for the absence of an elastic limit in these two metals. Reprint of a paper published in Comptes rendus des seances de l'Academie des Sciences, t. 249, p. 1225-1227, sitting of 5 October 1959 [French] L'anisotropie des coefficients de dilatation de l'uranium, du zirconium et du zinc provoque au cours du refroidissement de ces metaux des tensions internes. Eliminees par restauration a la temperature ambiante dans le cas du zinc, ces tensions persistent pour l'uranium et le zirconium et sont responsable de l'absence de limite elastique dans ces deux metaux. Reproduction d'un article publie dans les Comptes rendus des seances de l'Academie des Sciences, t. 249, p. 1225-1227, seance du 5 octobre 1959.

  15. New micrographic examination methods for nuclear metals and alloys; Methodes micrographiques originales pour l'examen de differents metaux et alliages nucleaires

    Energy Technology Data Exchange (ETDEWEB)

    Monti, H [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Compagnie Saint Gobain, Services Nucleaires (France)

    1959-07-01

    The report describes several methods of preparation of specimens (polishing and pickling) and the results obtained on metals: Pu, U, Th, Nb, Ta, V and alloys: Al-Pu, U-Pu and Th-Nb. (author) [French] On decrit diverses methodes de preparation d'echantillons metallographiques (polissage et attaque) ainsi que les resultats obtenus sur les metaux: Pu, U, Th, Nb, Ta, V et les alliages: Al-Pu, U-Pu et Th-Nb. (auteur)

  16. Microfractographic analysis of delamination growth in fatigue loaded - carbon fibre/thermosetting matrix composites; Mikrofraktographische Analyse des Delaminationswachstums in zyklisch belasteten Kohlenstoffaser/Duroplastharz-Verbundwerkstoffen

    Energy Technology Data Exchange (ETDEWEB)

    Heutling, F.; Franz, H.E. [Daimler-Benz AG, Muenchen (Germany); Friedrich, K. [Kaiserslautern Univ. (Germany). Inst. for Composite Materials Ltd.

    1998-05-01

    Carbon-fibre-reinforced plastics (CFRP) are known to be considerably less sensitive to fatigue loading than aluminium (Al) alloys, for instance. However, even in the presence of small delaminations, the damage tolerance of structural components may be considerably reduced. The scope of the present contribution is to investigate fatigue phenomena in CFRP materials (with thermosetting matrix) by means of microfractography. The microfractographic features of the fracture surfaces mirror the processes of deformation and fracture at the delamination front. The fatigue fracture behaviour of a CFRP laminate subjected to cyclic mixed-mode loading is determined by matrix-controlled failure mechanisms. Under pure mode-II loading conditions, rollers in addition to fatigue striations appear in the fibre imprints whose formation mechanism was explained by means of high-resolution field-emission scanning electron microscopy (FE-SEM). The ratio between the local tensile and shear stress components influences the propagation direction of secondary cracks originating at the fibres. The local fracture propagations in these secondary cracks can be recognised through the fatigue striations appearing on the surface of the matrix. A comparison with static mixed-mode loading reveals that in both cases the crack propagation follows the path of the local maximum main stress. Applying mathematical relationships derived from the theory of elasticity permitted developing a mixed-mode loading model which makes it possible to predict the crack processes and hence to explain the formation of typical fracture-morphological features. (orig.) 26 refs.

  17. Thermal fatigue of a 304L austenitic stainless steel: simulation of the initiation and of the propagation of the short cracks in isothermal and aniso-thermal fatigue; Fatigue thermique d'un acier inoxydable austenitique 304L: simulation de l'amorcage et de la croissance des fissures courtes en fatigue isotherme et anisotherme

    Energy Technology Data Exchange (ETDEWEB)

    Haddar, N

    2003-04-01

    The elbow pipes of thermal plants cooling systems are submitted to thermal variations of short range and of variable frequency. These variations bound to temperature changes of the fluids present a risk of cracks and leakages. In order to solve this problem, EDF has started the 'CRECO RNE 808' plan: 'thermal fatigue of 304L austenitic stainless steels' to study experimentally on a volume part, the initiation and the beginning of the propagation of cracks in thermal fatigue on austenitic stainless steels. The aim of this study is more particularly to compare the behaviour and the damage of the material in mechanic-thermal fatigue (cycling in temperature and cycling in deformation) and in isothermal fatigue (the utmost conditions have been determined by EDF for the metal: Tmax = 165 degrees C and Tmin = 90 degrees C; the frequency of the thermal variations can reach a Hertz). A lot of experimental results are given. A model of lifetime is introduced and validated. (O.M.)

  18. Energy consumption and management in metal heat treatment implementation; Consommation et gestion d`energie dans la mise en oeuvre des traitements thermiques des metaux

    Energy Technology Data Exchange (ETDEWEB)

    Leroux, C. [Vide et Traitements Services, 92 - Gennevilliers (France)

    1996-12-31

    Energy management in the metal heat treatment sector, where thermal efficiency is generally poor, is based on an adequate power supply contract with utilities, a thorough evaluation of energy consumption from the various equipment, and systems for the limitation of energy consumption: warning signals when the contracted power is to be reached, power cut-off systems or intelligent cut-off/restart systems and global load management. For gas appliances, heat recovery combustors may be a solution

  19. Adrenal Fatigue

    Science.gov (United States)

    ... Search Featured Resource New Mobile App DOWNLOAD Adrenal Fatigue October 2017 Download PDFs English Editors Irina Bancos, MD Additional Resources Mayo Clinic What is adrenal fatigue? The term “adrenal fatigue” has been used to ...

  20. Environmental effects on fatigue of steels for structural parts in water-steam-circuits of light water reactors. Considerations concerning the question of transferability of results from laboratory tests to real operating conditions; Der Einfluss des Mediums auf Ermuedungsvorgaenge in Staehlen fuer Strukturbauteile in Wasser-Dampf-Kreislaeufen von Leichtwasserreaktoren. Ueberlegungen zur Frage der Uebertragbarkeit von Ergebnissen aus Laborversuchen auf den realen Anlagenbetrieb

    Energy Technology Data Exchange (ETDEWEB)

    Roth, Armin [AREVA NP GmbH, Erlangen (Germany)

    2008-07-01

    Based on material science and physical chemistry it seems plausible that a corrosive medium can influence the fatigue behaviour of structural materials, i.e. steels. It has been shown decades before that high temperature water has significant effects on the fatigue behaviour of steels, decreasing the crack initiation time or increasing the growth rate of existing cracks. At the beginning of nuclear regulations this expected influence of the medium on fatigue of components of nuclear power plants was worldwide not accounted for in the relevant standards (for instance ASME Boiler and Pressure Vessel Code, section III). There was a general consideration of medium effects on the da/dN crack growth curves in the ASME Code, section XI for the assessment of the surface flaw behaviour during operation. Historically, these regulations were implemented long before the experimental observation of medium effects on crack initiation and crack growth during fatigue of steels in high-temperature water. Besides this fact there have been worldwide no generic, systematic damages of medium containing components in light-water reactors due to corrosion fatigue. Singular damages with significant medium influenced fatigue features could always be explained by not specified operational transients, like thermal stratification or local flow-induced vibrations. The contribution provides considerations that explain the discrepancy between to worldwide positive operational experience and the definitive experimental indication of a medium-enhanced fatigue. Based on these considerations the author scrutinizes critically the US NRC Regulatory Guide 1.207 with respect to the medium influence on the component's fatigue behaviour. Possibilities for experimental assessment of the discussed hypothesis are shown. [German] Es erscheint aus werkstoffkundlichen und physikalisch-chemischen Gruenden grundsaetzlich plausibel, dass ein korrosives Medium das Ermuedungsverhalten von Strukturwerkstoffen, z

  1. Is the cooling of coils of pulsed accelerators profitable?; Le refroidissement des bobines des accelerateurs pulses est-il avantageux?

    Energy Technology Data Exchange (ETDEWEB)

    Neyret, G.; Parain, J.; Schnuriger, J. C.

    1960-05-15

    In this report, the authors recall how metal resistivity decreases at low temperatures, and give some indications about the power and price of cryogenic installations. They report the study of the cooling of coils in accelerators displaying an alternate gradient with a 15 GeV energy, with or without a magnetic circuit in iron. They establish that cooling does not result in a decrease in the cost price for an hour of operation. They also state that it is not even sure that this cooling would result in a dimension reduction while increasing the maximum achievable induction [French] On rappelle comment la resistivite des metaux diminue aux basses temperatures, et on donne des indications sur la puissance et le prix des installations cryogeniques. On etudie le refroidissement des bobines d'accelerateurs a gradient alterne d'une energie de 15 GeV, avec ou sans circuit magnetique en fer; on trouve que le refroidissement ne permet pas de diminuer le prix de revient de l'heure de fonctionnement; il n'est meme pas sur qu'il puisse permettre de reduire les dimensions en elevant l'induction maximum realisable. L'idee de refroidir les bobines sans fer jusqu'a la temperature de l'air liquide est ancienne: Jean Perrin des 1907, puis Charly Fabry en 1910 l'avaient deja proposee. Recemment, cette idee est revenue a l'actualite: en 1958, R.F. Post a suggere de l'appliquer a la production de champs intenses en vue du confinement des plasmas thermonucleaires; en 1959, N.C. Christofilos a publie un projet d'accelerateur refroidi a 80 deg. K. Nous voulons examiner l'interet de refroidir les bobines d'un accelerateur, d'une part pour augmenter l'induction maximum (dans le cas de machines sans fer) et d'autre part pour diminuer l'importance de l'alimentation electrique. Cet examen est precede de generalites sur le refroidissement des bobines, generalites qui s'appliquent d'ailleurs a tous les champs magnetiques. Les trois metaux etudies sont ceux retenus comme les meilleurs par Post: le

  2. Fatigue behavior of austenitic steels. Subproject. Mechanism oriented investigation of the fatigue behavior of austenitic steel X6CrNiNb1810 in the HCF and VHCF regime. Final report; Ermuedungsverhalten Austenit. Teilprojekt. Mechanismenorientierte Untersuchung des Ermuedungsverhaltens des austenitischen Stahles X6CrNiNb1810 im HCF- und VHCF-Bereich. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Sorich, A.; Smaga, M.; Eifler, D.

    2015-01-23

    In addition to load cycles in the Low Cycle Fatigue (LCF)-regime due to start up and shut down procedures of power plants, in some components additional high-frequency loadings in the High Cycle Fatigue (HCF)- and Very High Cycle Fatigue (VHCF)-regime occur. These loadings are induced e.g. by stresses due to thermal cyclic fluctuations and fluid dynamic processes. Therefore it is necessary to characterize experimentally the cyclic deformation behavior of metastable austenitic steels at operating temperature particularly in the HCF- and VHCF-regime and to develop a nondestructive method to detect fatigue processes. This joint research project was conducted in cooperation between the Institute of Materials Science and Engineering (WKK) of the University of Kaiserslautern and the Fraunhofer-Institute for Non-Destructive Testing (IZFP) in Saarbruecken. WKK was focused on experimental investigations to characterize the cyclic deformation behavior of the metastable austenitic steel in the HCF- and VHCF-range, taking into account cyclic hardening and softening processes and in particular to consider fatigue-induced changes in microstructure. The IZFP has focused on the development and application of a testing concept based on electromagnetic ultrasonic measurements. The isothermal cyclic deformation behavior of the metastable austenitic steel X6CrNiNb1810 (1.4550, AISI 347) at 300 C in the HCF-range is characterized by cyclic softening until specimen failure. At strain amplitudes of 0.10 % ≤ ε{sub a,t} ≤ 0.15 % and the stress amplitude σ{sub a} = 160 MPa cyclic softening is followed by cyclic hardening, which results in a significant increase in life time, up to the limiting number of cycles, which was defined at N{sub I} = 10{sup 7} in HCF-regime. The cyclic hardening is determined by a transformation induced phase formation from face-centered cubic (fcc) austenite to body-centered cubic (bcc) α{sup '}-martensite and/or in hexagonal (hcp) ε-martensite. In

  3. Study of the point defects formed in cobalt by electron bombardment; Etude des defauts ponctuels crees par bombardement electronique dans le cobalt

    Energy Technology Data Exchange (ETDEWEB)

    Sulpice, G [Commissariat a l' Energie Atomique, 38 - Grenoble (France). Centre d' Etudes Nucleaires

    1968-12-01

    A study of the point defects formed in cobalt by electron bombardment is presented. The results are compared with those previously obtained for two other ferromagnetic metals of different structure, iron and nickel. In the first part we give a review of the literature concerning the creation of point defects, their contribution to resistivity and their annihilation mode in the three structure types. We then describe the experimental techniques adapted, in particular the study of the resistivity increase during a linear temperature rise. Our investigations concern the following, essential points : the observation of the successive annihilation stages of the point defects formed in pure cobalt, a study of the variations with respect to the doses and energy of the incident particles, and the determination of the annealing kinetics and the corresponding activation energies. The results are finally compared with the various models of point defect annihilation proposed for other metals: none of these interpretations is in perfect agreement with our results. In the case of cobalt we are thus led to modify the model proposed by our laboratory for iron an nickel. The difference between these three metals is explained by the anisotropic character of the cobalt matrix. (author) [French] Nous presentons une etude des defauts ponctuels crees par bombardement electronique dans le cobalt et comparons nos resultats a ceux obtenus precedemment dans deux autres metaux ferromagnetiques de structure differente, le fer et le nickel. Dans une premiere partie nous faisons une mise au point bibliographique comparee sur la creation des defauts, leur contribution a la resistivite et leur mode d'annihilation dans les trois types de structure. Nous decrivons ensuite les techniques experimentales mises au point, en particulier l'etude du revenu de la resistivite au cours d'une montee lineaire de temperature. Au cours de ce travail, nous avons mis en evidence les stades successifs d

  4. Seafarer fatigue

    DEFF Research Database (Denmark)

    Jepsen, Jørgen Riis; Zhao, Zhiwei; van Leeuwen, Wessel M. A.

    2015-01-01

    Background: The consequences of fatigue for the health and safety of seafarers has caused concern in the industry and among academics, and indicates the importance of further research into risk factors and preventive interventions at sea. This review gives an overview of the key issues relating...... to seafarer fatigue. Materials and methods: A literature study was conducted aiming to collect publications that address risk factors for fatigue, short-term and long-term consequences for health and safety, and options for fatigue mitigation at sea. Due to the limited number of publications that deals...... with seafarers, experiences from other populations sharing the same exposures (e.g. shift work) were also included when appropriate. Results: Work at sea involves multiple risk factors for fatigue, which in addition to acute effects (e.g., impaired cognition, accidents) contributes through autonomic, immunologic...

  5. Stereochemistry and mechanism of the reduction of some bicyclo (2-2-1-) heptane-2-ones by metals dissolved in liquid ammonia; Stereochimie et mecanisme de la reduction de quelques bicyclo (2-2-1) heptanones-2 par les metaux dissous dans l'ammoniac liquide

    Energy Technology Data Exchange (ETDEWEB)

    Coulombeau, A [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1969-07-01

    A systematic experimental study of the reduction of four bicyclo(2-2-1)hepta n-2-ones by dissolved alkaline and alkaline-earth metals in liquid ammonia is reported. Chapter one: models of metal-ammonia solutions and mechanisms of the reduction of ketones by these solutions are rapidly recalled. Chapter two: results obtained in the thermodynamic equilibration of three pairs of epimeric alcohols which formally derive from three of the starting ketones are presented. Chapter three: deals with the results obtained in the reduction of the ketones in the absence or the presence of a proton source. A new interpretation of these results is given and is based upon two different effects: - the torsional interaction created by the bridgehead substituent on the C-O bond which favours the formation of the endo alcohol; - the difference of steric hindrance between the two sides (exo and endo) defined by the plane of the carbonyl group of the starting molecule, which favours the attack of the metal cation from one side or the other, and therefore the formation of the exo or the endo epimer. This mechanism is generalised in a model which is tested by means of some examples published in the literature. It then appears able to construe correctly the obtained results. (author) [French] Une etude experimentale systematique de la reduction de quatre bicyclo-(2-2-1)heptanones-2 par les metaux alcalins et alcalino-terreux dissous dans l'ammoniac liquide a ete effectuee. 1er chapitre: on y rappelle rapidement les modeles proposes pour la structure des solutions metalliques dans l'ammoniac liquide, ainsi que les mecanismes de reduction des cetones par ces solutions. 2eme chapitre: on y presente les resultats obtenus lors de l'equilibration thermodynamique de trois couples d'alcools epimeres derivant de trois des cetones reduites. 3eme chapitre: il concerne les resultats obtenus lors de la reduction des cetones en l'absence ou en presence de donneurs de protons. Une interpretation nouvelle

  6. Oxidation films morphology; Sur la morphologie des pellicules d'oxydation

    Energy Technology Data Exchange (ETDEWEB)

    Paidassi, J. [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    After studying the oxidation of several pure polyvalent metals (Fe, Cu, Mn, Ni, U) and of their oxides at high temperature and atmospheric pressure, the author suggests how to modify the usual representation of the oxide film (a piling of different oxide layers, homogeneous on a micrographic scale with a equi-axial crystallisation, free of mechanical tensions, with flat boundary surfaces) to have it nearer to reality. In this first part, the author exposes the study of the real micrographic structure of the oxidation film and gives examples of precipitation in the oxides during the cooling of the oxidised sample. (author) [French] En se basant sur les etudes qu'il a faites sur l'oxydation aux temperatures elevees et a la pression atmospherique de quelques metaux purs a valences multiples (Fe, Cu, Mn, Ni, U), et de leurs oxydes, l'auteur suggere comment le schema qui representerait la pellicule comme etant une superposition de diverses couches d'oxydes, homogenes micrographiquement, a cristallisations equiaxes, depourvues de tensions mecaniques et separees par des interfaces plans, doit etre modifie pour s'ajuster a la realite. Dans cette premiere partie, l'auteur etudie la structure micrographique reelle des pellicules d'oxydation et donne des exemples de precipitation dans les oxydes au cours du refroidissement des echantillons oxydes. (auteur)

  7. Oxidation films morphology; Sur la morphologie des pellicules d'oxydation

    Energy Technology Data Exchange (ETDEWEB)

    Paidassi, J [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    After studying the oxidation of several pure polyvalent metals (Fe, Cu, Mn, Ni, U) and of their oxides at high temperature and atmospheric pressure, the author suggests how to modify the usual representation of the oxide film (a piling of different oxide layers, homogeneous on a micrographic scale with a equi-axial crystallisation, free of mechanical tensions, with flat boundary surfaces) to have it nearer to reality. In this first part, the author exposes the study of the real micrographic structure of the oxidation film and gives examples of precipitation in the oxides during the cooling of the oxidised sample. (author) [French] En se basant sur les etudes qu'il a faites sur l'oxydation aux temperatures elevees et a la pression atmospherique de quelques metaux purs a valences multiples (Fe, Cu, Mn, Ni, U), et de leurs oxydes, l'auteur suggere comment le schema qui representerait la pellicule comme etant une superposition de diverses couches d'oxydes, homogenes micrographiquement, a cristallisations equiaxes, depourvues de tensions mecaniques et separees par des interfaces plans, doit etre modifie pour s'ajuster a la realite. Dans cette premiere partie, l'auteur etudie la structure micrographique reelle des pellicules d'oxydation et donne des exemples de precipitation dans les oxydes au cours du refroidissement des echantillons oxydes. (auteur)

  8. Fatigue (PDQ)

    Science.gov (United States)

    ... Data Conducting Clinical Trials Statistical Tools and Data Terminology Resources NCI Data Catalog Cryo-EM NCI's Role ... Problems getting enough sleep. Being less active. Other medical conditions. Fatigue is common in people with advanced ...

  9. Report on the environmental and health effects of heavy metals; Rapport sur les effets des metaux lourds sur l'environnement et la sante

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-04-01

    In the framework of the bond between the environment and the health, a major interest of the today political debate, the author proposes a report on the environmental and health effects of the heavy metals to help political deciders in the technological and scientific choices. The first part is devoted to the dental amalgam and more specially the use, the environmental and the health aspects of the mercury. The second part deals with the consequences of heavy metals on the environment. The sources, the atmospheric emissions, the releases in water and soils, the heavy metals wastes are detailed. In parallel the third part deals with the consequences of heavy metals on the health, including the toxicity, the risks evaluation, the food exposure, the heavy metals in the life places and the mercury in Guyana. (A.L.B.)

  10. Report on the environmental and health effects of heavy metals; Rapport sur les effets des metaux lourds sur l'environnement et la sante

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-04-01

    In the framework of the bond between the environment and the health, a major interest of the today political debate, the author proposes a report on the environmental and health effects of the heavy metals to help political deciders in the technological and scientific choices. The first part is devoted to the dental amalgam and more specially the use, the environmental and the health aspects of the mercury. The second part deals with the consequences of heavy metals on the environment. The sources, the atmospheric emissions, the releases in water and soils, the heavy metals wastes are detailed. In parallel the third part deals with the consequences of heavy metals on the health, including the toxicity, the risks evaluation, the food exposure, the heavy metals in the life places and the mercury in Guyana. (A.L.B.)

  11. Release kinetics and mechanisms of trace heavy metals from cement based material; Cinetiques et mecanismes de relargage des metaux lourds presents en traces dans les matrices cimentaires

    Energy Technology Data Exchange (ETDEWEB)

    Moudilou, E.

    2002-12-15

    Chemical species contained in a solid matrix may be transferred to the environment through water leaching. Previous studies of trace metals released from building materials (particularly cement-based ones) highlight an important analytical difficulty. The aim of this study is to determine the kinetics and the mechanisms involved in the release of trace heavy metals (Cr, Cu, Ni, Pb, V and Zn) from industrial cement pastes (usually ranging from 20 to 300 ppm). The development of a dynamic leaching system, named CTG-LEACHCRETE, (used at pH=5, 20 C) which permits the evaluation of the kinetics of trace heavy metals is presented in the first part. Also, innovative solid analysis techniques (ICP-MS-Laser Ablation, local and Grazing Incidence X-rays Diffraction (GIXD) technique) were used to characterise the cement-degraded layers formed during leaching experiments. These techniques enable to monitor the mineralogical evolution and the distribution of trace metals in these areas. The confrontation of these two approaches, kinetic and solid analysis, coupled with a thorough investigation of previously developed models, lead to proposals concerning the mechanisms of release of the trace heavy metals studied. In all the cement pastes studied (CPA-CEM I, CPJ-CEM II/A and CLC-CEM V/A), chromium is trapped in ettringite by substitution SO{sub 4}{sup 2-}(U)CrO{sub 4}{sup 2-} and its release is then controlled by the dissolution of this hydrate. The behaviour of copper, nickel and zinc in degraded areas and in leachates, are correlated to the silicon of the hydrated calcium silicate (CSH), which imply that they are localised there. Lead, was never detected in the leachates. But it is also correlated to the silicon in the degraded layers. (author)

  12. Source, flux and balance of atmospheric deposition of metals at Ile-de-France; Source, flux et bilan des retombees atmospheriques de metaux en Ile de France

    Energy Technology Data Exchange (ETDEWEB)

    Azimi, S

    2004-07-15

    The urban atmosphere is submitted to large inputs of anthropogenic contaminants arising from both stationary (power plants, industries, etc.) and mobile (road traffic) sources. These small particles may be transported over long distances and affect ecosystems. Significant dry and wet atmospheric deposition also occurs locally and contributes to the contamination of urban runoff. The aim of this study is to compare heavy metal and hydrocarbon atmospheric deposition fluxes to other input ways on agricultural and urban areas to assess their importance. Moreover, a source investigation has been done to identify the main origins of these pollutants. Before the quantification of pollutant fluxes, a comparison of several sampling procedures was performed. As a result, the sampling of total atmospheric deposition is not affected by the funnel material (Teflon and polyethylene) or by the sampling duration (7 and 28 days). However, the rinsing step of the funnel walls showed a higher relative importance during short sampling periods. The relative amount contained in these solutions reached 24 to 40 % of the total flux during weekly sampling periods and 8 to 18 % during monthly sampling periods, whatever the element considered. The temporal evolution of atmospheric deposition showed no seasonal influence on flux variations during the 2001-2002 period. Considering an 8-year period behaviour, between 1994 and 2002, a significant decrease of the deposition fluxes of Cd, Cu, Pb and Zn occurred at the Creteil site which is placed in an industrialized area of the Paris suburb. The decreasing factor reached 16, 2.5, 4 and 7.5 for these elements respectively. At the Ile-de-France scale, the deposition flux levels on urban and semi-urban areas were of the same order of magnitude (?20 tonnes per year for Ba, Cu, Pb and Sr). Since semi-urban surface area is four times higher than urban ones, the important influence of anthropogenic activities on atmospheric deposition of urban areas is evidenced. At the Seine River catchment scale, the atmospheric deposition levels were of the same order of magnitude as Seine River particle contents measured at the catchment estuary (Poses). The flux ratio between atmospheric inputs and Seine particles ranged between 0.8 and 4.8 for Al, Cd, Co, Cu, Fe, Mn, Ni, Pb and Zn. The importance of atmospheric deposition of metals was estimated on agricultural and urban areas. In the first case, the atmospheric fallout appears as the main input way of Cu, Ni and Pb to agro-systems while Cd is mainly introduced by fertilizers. These two input ways induced an increase of Cd, Ni and Pb in the cultivated horizon with an annual balance reaching 0.33, 0.014 and 0.014 %, respectively, of actual stocks while the Cu showed a decrease with an annual balance reaching 0.024 %. In the second case, atmospheric deposition was compared to roof and street runoff. The atmospheric deposition is the main introducing way of most of considered elements, compared to roof runoff excepting Cu, Pb, Ti and Zn which are mainly emitted by the latter. Nevertheless, compared to street runoff, atmospheric deposition levels are 1.5 to 27 times lower than street cleaning ones showing that atmospheric introducing way is not the main introducing way of metals in urban areas. The source investigation on atmospheric deposition was performed using several tools developed during this study. The results allow the characterisation of the anthropogenic sources considered using specific elements or ratios. These tools were applied to the atmospheric deposition data but they did not allowed the determination of anthropogenic activities because of the atmospheric mixture. (author)

  13. Development of hydrogen oxidizing bacteria using hydrogen from radiolysis or metal corrosion; Developpement de populations microbiennes oxydant l'hydrogene produit par radiolyse ou par corrosion des metaux

    Energy Technology Data Exchange (ETDEWEB)

    Libert, M F; Sellier, R; Marty, V; Camaro, S [CEA Cadarache, Dept. d' Entreposage et de Stockage des Dechets (DCC/DESD/SEP), 13 - Saint-Paul-lez-Durance (France)

    2000-07-01

    The effect of many parameters need to be studied to characterize the long term behavior of nuclear waste in a deep repository. These parameters concern the chemical effects, radiolytic effects, mechanical properties, water composition, and microbiological activity. To evaluate microbial activity in such an environment, work was focused on an inventory of key nutrients (C, H, 0, N, P, S) and energy sources required for bacterial growth. The production of hydrogen in the nuclear waste environment leads to the growth of hydrogen oxidizing bacteria, which modify the gas production balance. A deep repository containing bituminized waste drums implies several sources of hydrogen: - water radiolysis; -corrosion of metal containers; - radiolysis of the embedding matrix (bitumen). Two deep geological disposal conditions leading to H{sub 2} production in a bituminized nuclear waste environment were simulated in the present study: - H{sub 2} production by iron corrosion under anaerobic conditions was simulated by adding 10% of H{sub 2} in the atmosphere; - H{sub 2} production by radiolysis of bitumen matrix was approached by subjecting this material to external gamma irradiation with a dose rate near real conditions (6 Gy/h). The presence of dissolved H{sub 2} in water allows the growth of hydrogen oxidizing bacteria leading to: - CO{sub 2} and N{sub 2} production; - H{sub 2} consumption; - lower NO{sub 3}{sup -} concentration caused by reduction to nitrogen. In the first case, hydrogen consumption is limited by the NO{sub 3}{sup -} release rate from the bitumen matrix. In the second case, however, under gamma radiation at a low dose rate, hydrogen production is weak, and the hydrogen is completely consumed by microorganisms. Knowledge about these hydrogen oxidizing bacteria is just beginning to emerge. Heterotrophic denitrifying bacteria adapt well to hydrogen metabolism (autotrophic metabolism) by oxidizing H{sub 2} instead of hydrocarbons. (authors)

  14. An overview of fatigue

    International Nuclear Information System (INIS)

    Mc Evily, A.J.

    1987-01-01

    Four topics are briefly discussed in this paper: fatigue crack initiation and growth in a nickel-base superalloy single crystal, the environment effect on near-threshold fatigue crack growth behaviour, the role of crack closure in load-interaction effects in fatigue crack growth, and the nature of creep-fatigue interactions, if any, during fatigue crack growth. (Author)

  15. Study of thermodynamic properties of binary and ternary liquid alloys of aluminium with the elements iron, cobalt, nickel and oxygen; Etude des proprietes thermodynamiques des alliages liquides binaires et ternaires de l'aluminium avec les elements fer, cobalt, nickel et l'oxygene

    Energy Technology Data Exchange (ETDEWEB)

    Vachet, F [CEA Vallee du Rhone, 26-Pierrelatte (France)

    1966-07-01

    The present work deals with the thermodynamic study of aluminium liquid alloys with the metals iron, cobalt and nickel. The experiments carried out lead to the activity, at 1600 deg C, of aluminium in the (Al, Fe), (Al, Co), (Al, Ni) liquid alloys. The experimental method used consists in studying the partition of aluminium between the liquid immiscible phases made up with the pairs of metals (Fe, Ag), (Co, Ag), (Ni, Ag). The informations so obtained are used for drawing the isothermal equilibrium phases diagrams sections of (Al, Fe, Ag), (Al, Co, Ag), (Al, Ni, Ag) systems. The study of the partition of silver between lead and aluminium joined with the determinations of several authors allows us to determine the aluminium activity, analytically presented, in the metal M (iron cobalt and nickel). The Wagner's interaction parameters of aluminium in metal M are determined. The results obtained as the equilibrium phases diagrams of (Al, M) systems allow to compare the thermodynamic properties of the Al Fe system in liquid and solid states and to estimate the enthalpies of melting of the AlCo and AlNi intermetallic compounds. The activity, at 1600 deg C, of aluminium in (Al, Fe, Co), (Al, Fe, Ni), (Al, Co, Ni) liquid alloys is estimated through thermodynamic properties of binary components systems by application of several methods leading to results in good agreement. The study of aluminium-oxygen interactions in the liquid metallic solvants M allows us to propose an explanation for the shape of the deoxidation equilibrium line of iron, cobalt and nickel by aluminium and to compare the de-oxidizing power of aluminium toward iron, cobalt and nickel oxides. (author) [French] Le travail presente se rapporte a l'etude thermodynamique des alliages liquides de l'aluminium avec les metaux fer, cobalt et nickel. Les experiences effectuees ont pour but de determiner l'activite, a 1600 C, de l'aluminium dans les alliages liquides (Al, Fe), (Al, Co), (Al, Ni). La methode

  16. Side Effects: Fatigue

    Science.gov (United States)

    Fatigue is a common side effect of many cancer treatments such as chemotherapy, radiation therapy, immunotherapy, and surgery. Anemia and pain can also cause fatigue. Learn about symptoms and way to manage fatigue.

  17. Study of the damage processes induced by thermal fatigue in stainless steels F17TNb and R20-12 for automobile application; Etude de l'endommagement en fatigue thermique des aciers inoxydables F17TNb et R20-12 pour application automobile

    Energy Technology Data Exchange (ETDEWEB)

    Bucher, L.

    2004-12-15

    Thermal cycling is the main cause of fatigue failure in automobile exhaust manifolds for which the use of stainless steel now rivals that of cast iron which has been traditionally used. An original fatigue test has been developed by Ugine and ALZ, a stainless steel producer, so as to be able to compare different grades of stainless steel alloys. This test is representative of the thermal conditions encountered in the critical zones of exhaust manifolds. However, it has revealed significant differences in damage processes in the ferritic and austenitic grades tested. The subject of this thesis is the damage processes induced by thermal fatigue in stainless steels used for automotive exhaust manifolds. Two stainless steels were studied: a ferritic grade, F17TNb (17%Cr and stabilized with Ti and Nb), and an austenitic grade, R20-12, containing 20% Cr and 12% Ni. The first objective was to understand the different damage processes induced by thermal fatigue in the ferritic and austenitic grades. The second was to develop a numerical design tool of the thermally tested structures. (author)

  18. Diffusion of uranium with several transition metals; Diffusion de l'uranium avec quelques metaux de transition

    Energy Technology Data Exchange (ETDEWEB)

    Adda, Y [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Philibert, J [Institut de Recherches de la Siderurgie Francaise (IRSID), 78 - Saint-Germain-en-Laye (France)

    1958-07-01

    After a brief description of the experimental procedure, the curves representing the concentration versus the depth of penetration are presented for the various systems under study. From these curves, it is possible to derive the diffusion coefficient and the activation energy as functions of the concentration. Moreover in the multiphase region, these curves enable one to establish the equilibrium diagram. The growth kinetics of the various zones characterized by their micrographic aspect is also studied and the corresponding activation energies calculated. These activations energies are compared to the ones for the diffusion process at the same concentration. Finally in order to precise the diffusion mechanism, the Kirkendall effect is studied and the Darken intrinsic coefficients calculated. (author)Fren. [French] Apres avoir decrit brievement les methodes experimentales, nous presentons les courbes concentration-penetration caracterisant la diffusion dans les differents systemes etudies. Celles-ci permettent de calculer les coefficients de diffusion et leur energie d'activation, en fonction de la concentration, et de plus, dans le domaine polyphase, d'etablir le diagramme d'equilibre. En outre, on a etudie la cinetique de croissance des diverses zones caracterisees par leur aspect micrographique et calcule les energies d'activation correspondantes; celles-ci ont ete comparees aux energies d'activation de diffusion, pour les memes valeurs de la concentration. Enfin, en vue de preciser les mecanismes de diffusion, nous avons etudie l'effet Kirkendall et calcule les coefficients intrinseques de Darken. (auteur)

  19. Diffusion of uranium with several transition metals; Diffusion de l'uranium avec quelques metaux de transition

    Energy Technology Data Exchange (ETDEWEB)

    Adda, Y. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Philibert, J. [Institut de Recherches de la Siderurgie Francaise (IRSID), 78 - Saint-Germain-en-Laye (France)

    1958-07-01

    After a brief description of the experimental procedure, the curves representing the concentration versus the depth of penetration are presented for the various systems under study. From these curves, it is possible to derive the diffusion coefficient and the activation energy as functions of the concentration. Moreover in the multiphase region, these curves enable one to establish the equilibrium diagram. The growth kinetics of the various zones characterized by their micrographic aspect is also studied and the corresponding activation energies calculated. These activations energies are compared to the ones for the diffusion process at the same concentration. Finally in order to precise the diffusion mechanism, the Kirkendall effect is studied and the Darken intrinsic coefficients calculated. (author)Fren. [French] Apres avoir decrit brievement les methodes experimentales, nous presentons les courbes concentration-penetration caracterisant la diffusion dans les differents systemes etudies. Celles-ci permettent de calculer les coefficients de diffusion et leur energie d'activation, en fonction de la concentration, et de plus, dans le domaine polyphase, d'etablir le diagramme d'equilibre. En outre, on a etudie la cinetique de croissance des diverses zones caracterisees par leur aspect micrographique et calcule les energies d'activation correspondantes; celles-ci ont ete comparees aux energies d'activation de diffusion, pour les memes valeurs de la concentration. Enfin, en vue de preciser les mecanismes de diffusion, nous avons etudie l'effet Kirkendall et calcule les coefficients intrinseques de Darken. (auteur)

  20. Fatigue with HIV/AIDS

    Science.gov (United States)

    ... 21, 2014 Select a Language: Fact Sheet 551 Fatigue WHAT IS FATIGUE? IS FATIGUE IMPORTANT? HOW DO ... It can be physical or psychological. With physical fatigue , your muscles cannot do things as easily as ...

  1. Thermal Acoustic Fatigue Apparatus

    Data.gov (United States)

    Federal Laboratory Consortium — The Thermal Acoustic Fatigue Apparatus (TAFA) is a progressive wave tube test facility that is used to test structures for dynamic response and sonic fatigue due to...

  2. Study of point defects in pure iron by means of electrical resistivity; Etude au moyen de la resistivite electrique des defauts ponctuels dans le fer pur

    Energy Technology Data Exchange (ETDEWEB)

    Minier-Cassayre, C [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1965-04-01

    In the first part of this work, after having reviewed the production, observation and the annealing of point defects In metals, we resume the present state of research. In the second part, we explain the techniques we have employed to produce point defects at low temperatures: irradiation, quenching and cold-work; and go on to the study of their migration and annealing. The experimental results obtained for pure iron and for iron containing certain impurities are presented in the third part. In the fourth part we suggest a model which explains the different stages of annealing observed, and their properties. We then compare the energies of interaction between point defects with the values deduced from the theory of elasticity. (author) [French] Dans la premiere partie de cette etude, apres avoir passe en revue la production, l'observation et les modes de guerison des defauts ponctuels dans les metaux, nous exposons l'etat actuel des recherches. La seconde partie est consacree aux techniques que nous avons employees pour produire des defauts ponctuels a basse temperature: irradiations, trempe et ecrouissage puis a l'etude de leur migration et de leur guerison. Les resultats experimentaux obtenus dans le fer pur et le fer contenant certaines impuretes sont presentes dans le troisieme chapitre. Nous proposons ensuite un modele qui explique les differents stades de guerison observes et leurs nombreuses proprietes: nous comparons les energies d'interaction entre defauts ponctuels aux valeurs que l'on pourrait deduire d'un modele elastique. (auteur)

  3. Attempts to improve the fatigue characteristics of the austenitic steel X5CrNi18-10 in the temperature range of 25-600 C by mechanical boundary layer hardening; Zur Verbesserung des Ermuedungsverhaltens des austenitischen Stahls X5CrNi18-10 im Temperaturbereich 25-600 C durch mechanische Randschichtverfestigungsverfahren

    Energy Technology Data Exchange (ETDEWEB)

    Nikitin, Ivan

    2007-01-31

    Pieces of the austenitic steel X5CrNi18-10 whose boundary layers had been hardened by different methods were investigated with a view to their fatigue deformation characteristics in the temperature range of 25-600 degC. Parallel to this, microstructural and X-ray analyses provided deeper understanding of fatigue deformation. The microstructure was characterized, among others, by TEM. Boundary layers were solidified by rolling, by a combination of mechanical and thermal processes, by high-temperature rolling, and by laser shock solidification. The analyses focused on microstructural processes and on the intrinsic stress stability and provided important information on the fabrication of structural components with optimised life. (orig.)

  4. Determinants of seafarers’ fatigue

    DEFF Research Database (Denmark)

    Bøggild Dohrmann, Solveig; Leppin, Anja

    2017-01-01

    in the review. The main reason for exclusion was fatigue not being the outcome variable. Results: Most evidence was available for work time-related factors suggesting that working nights was most fatiguing, that fatigue levels were higher toward the end of watch or shift, and that the 6-h on–6-h off watch...

  5. The distribution of radionuclides and some trace metals in the water columns of the Japan and Bonin trenches; Repartition des nucleides radioactifs et de quelques metaux-traces dans les fosses du Japon et des iles Bonin

    Energy Technology Data Exchange (ETDEWEB)

    Nozari, Y.; Yamada, M. [Tokyo Univ. (Japan). Ocean Research Inst; Nakanishi, T. [Kanazawa Univ. (Japan). Dept. of Chemistry; Nagaya, Y.; Nakamura, K.; Yamada, M. [National Inst. of Radiological Sciences, Hitachinaka, Ibaraki (Japan); Shitashima, K.; Tsubota, H. [Hiroshima Univ. (Japan). Faculty of Integrated Arts and Sciences

    1998-05-01

    Presented here is the first geochemical data on the U/Th series Th, Pa, Ac, and Pb isotopes and artificial fallout radionuclides ({sup 90}Sr, {sup 137}Cs, and Pu isotopes), and some trace elements (V, Zn, Cd, Cu, Mn, and Ni) in two water columns of the Japan and Bonin trenches down to the bottom depths of 7585 m and 9750 m, respectively. Hydrographic properties such as temperature, salinity dissolved oxygen, and nutrient content within the trench valley remain constant at the same levels as those in the bottom water of the Northwest Pacific basin (typically {approx}6000 m in depth). The radionuclide activities and most trace metal concentrations are also not very different from those in the overlying water at depths of around 5000-6000 m. This means that any chemical alteration which sea water undergoes during its residence within the trench was not obviously detected by the techniques used here. The suggestion follows that the trench water is rather freely communicating y isopycnal mixing with the bottom water overlying the Northwest Pacific abyssal plain. The trench waters contain high {sup 239,240}Pu activities throughout, indicating that Pu is actively regenerating from rapidly sinking, large particles at the bottom interface, probably due to a change in the oxidation state. On the other hand, the vertical profiles of {sup 210}Pb and {sup 231}Pa show lower activities within the trench than those in the overlying deep waters, suggesting that the effect of boundary and bottom scavenging is significant in controlling their oceanic distributions. However, none of the trace metals studied here obviously follows the behaviour of the above nuclides. The {sup 228}Th data show scattering within the Bonin Trench that is largely ascribable to analytical errors. If, however we accept that the scatter of {sup 228}Th data is real and the variation is caused solely by decay of its parent {sup 228}Ra, we can set an upper limit of {approx}5 years for the renewal time of the trench water. (authors) 47 refs.

  6. Creep-fatigue propagation of semi-elliptical crack at 650 deg. C in 316L(N) stainless steel plates with or without welded joints; Propagation de fissures semi-elliptiques en fatigue-fluage a 650 deg. C dans des plaques d'acier 316L(N) avec ou sans joints soudes

    Energy Technology Data Exchange (ETDEWEB)

    Curtit, F

    2000-07-01

    This study realised in LISN Laboratory of CEA Saclay, deals with the creep fatigue propagation of semi elliptical crack at the temperature of 650 deg C in 316L(N) stainless steel plates with or without welded joints. A vast majority of the studies on creep fatigue propagation models are based on specimen (CT) especially designed for crack propagation study. The PLAQFLU program performed in LISN laboratory deals with the application and adaptation of these models to complex crack shape, which are more representative of the cracks observed in industrial components. In this scope, we use propagation tests realised at the temperature of 650 deg C with wide plates containing semi elliptical defects. For some of them, the initial defect is machined in the middle of a welded joint, which constitute a privileged site for the crack initiation. The approach used in this study is based on global parameters of fracture mechanics. At first, tests on CT specimen are used in order to determine the propagation laws correlating the crack growth rate to the global parameters K or C{sup *}. These laws are then supposed to be intrinsic to our materials and are used to analysed the semi elliptical crack propagation. The analysis of the comportment of the crack during the hold time demonstrates the possibility to establish a correlation between the crack propagation both in the deepest and the surface point and the local value of C{sup *}. These correlations are coherent in the different points of the crack front for the different applied hold times, and they present a reasonably good agreement with the creep propagation law identified on CT specimen. The simulation of test performed on based metal specimen with a model of summation of both creep and pure fatigue crack growth gives acceptable results when the calculus of the simplified expression of C{sup *}{sub s} considers a continuous evolution of creep deformations rate during the all test. (author)

  7. Fatigue Damage in Wood

    DEFF Research Database (Denmark)

    Clorius, Christian Odin; Pedersen, Martin Bo Uhre; Hoffmeyer, Preben

    1996-01-01

    An investigation of fatigue failure in wood subjected to load cycles in compression parallel to grain is presented. Fatigue failure is found to depend both on the total time under load and on the number of cycles.Recent accelerated fatigue research on wood is reviewed, and a discrepancy between...... to 10 Hz are used. The number of cycles to failure is found to be a poor measure of the fatigue performance of wood. Creep, maximum strain, stiffness and work are monitored throughout the fatigue tests. Accumulated creep is suggested identified with damage and a correlation between stiffness reduction...

  8. ANALYSE DES PERCEPTIONS LOCALES ET DES FACTEURS ...

    African Journals Online (AJOL)

    AISA

    1Faculté des Sciences Agronomiques (FSA), Université d'Abomey-Calavi (UAC), 01 BP 526 Cotonou Bénin. Email : cgbemavo@yahoo.fr. 2Institut National des Recherches Agricoles du Bénin, Centre de Recherches Agricoles d'Agonkanmey (CRA-A),. Laboratoire des Sciences du Sol, Eau et Environnement (LSSEE).

  9. Fatigue of the quenched and hardened steel 42CrMo4 under multiaxial in- and out-of-phase loading; Ermuedung des Stahles 42CrMo4 unter mehrachsiger, phasenverschobener Beanspruchung

    Energy Technology Data Exchange (ETDEWEB)

    Loewisch, G. [Stiftung Inst. fuer Werkstofftechnik, Bremen (Germany); Bomas, H.; Mayr, P.

    1999-10-01

    Two kinds of specimens out of the quenched and hardened steel 42CrMo4 (similar SAE 4140) were tested by combined tension-torsion in- and out-of-phase loading. The specimens batches differed in the residual stress state. Under cyclic, stress controlled loading an elastic behaviour is registrated until 50% of the life time. Then a rapid softening occurs, which correlates with the von-Mises equivalent stress in the case of in-phase loading. At high stress amplitudes, the residual stresses may be neglected. The lifetime is best described by the fatigue criterion of Zenner which considers the integral average of the stress state in every plane. This stress state is described by a linear combination of the shear stress amplitude and the normal stress amplitude. Below the cyclic yield strength, the residual stresses must be taken into account as static stresses. The comparison of the local residual stress distributions is possible by using the weakest link model of Heckel, which is described in detail. (orig.)

  10. Cognitive and Physical Fatigue Tasks Enhance Pain, Cognitive Fatigue and Physical Fatigue in People with Fibromyalgia

    Science.gov (United States)

    Dailey, Dana L; Keffala, Valerie J; Sluka, Kathleen A

    2014-01-01

    Objective Fibromyalgia is a condition characterized by chronic widespread muscle pain and fatigue. The primary objective of this study was to determine if pain, perceived cognitive fatigue, and perceived physical fatigue were enhanced in participants with fibromyalgia compared to healthy controls during a cognitive fatigue task, a physical fatigue task and a dual fatigue task. Methods Twenty four people with fibromyalgia and 33 healthy controls completed pain, fatigue and function measures. A cognitive fatigue task (Controlled Oral Word Association Test) and physical fatigue task (Valpar peg test) were done individually and combined for a dual fatigue task. Resting pain, perceived cognitive fatigue and perceived physical fatigue were assessed during each task using visual analogue scales. Function was assessed with shoulder range of motion and grip. Results People with fibromyalgia had significantly higher increases in pain, cognitive fatigue and physical fatigue when compared to healthy controls after completion of a cognitive fatigue task, a physical fatigue task, or a dual fatigue task (pfatigue tasks, respectively. Conclusions These data show that people with fibromyalgia show larger increases in pain, perceived cognitive fatigue and perceived physical fatigue to both cognitive and physical fatigue tasks compared to healthy controls. The increases in pain and fatigue during cognitive and physical fatigue tasks could influence subject participation in daily activities and rehabilitation. PMID:25074583

  11. Soudage des aciers pour application mécanique

    CERN Document Server

    Deveaux, Dominique

    2016-01-01

    Ce guide détermine les bonnes pratiques pour comprendre les risques d’une forme d’assemblage multimatériaux : celui par soudage de nuances à forte teneur en carbone avec des éléments en acier de construction. Dans un premier temps, le rapport passe en revue l’examen des avaries sur des assemblages soudés pour l’application mécanique mettant en cause les aciers. Fissuration par fatigue, rupture fragile, rupture ductile, fissuration à chaud ou à froid sont autant de causes qui seront analysées. Dans un deuxième temps, il se concentre sur la conception des joints soudés. Du choix des nuances à la tenue vis-à-vis de la rupture fragile en passant par l’analyse en fatigue des assemblages soudés, c’est l’ensemble de la problématique qui est pris en compte.

  12. Clinical neurophysiology of fatigue.

    Science.gov (United States)

    Zwarts, M J; Bleijenberg, G; van Engelen, B G M

    2008-01-01

    Fatigue is a multidimensional concept covering both physiological and psychological aspects. Chronic fatigue is a typical symptom of diseases such as cancer, multiple sclerosis (MS), Parkinson's disease (PD) and cerebrovascular disorders but is also presented by people in whom no defined somatic disease has been established. If certain criteria are met, chronic fatigue syndrome can be diagnosed. The 4-item Abbreviated Fatigue Questionnaire allows the extent of the experienced fatigue to be assessed with a high degree of reliability and validity. Physiological fatigue has been well defined and originates in both the peripheral and central nervous system. The condition can be assessed by combining force and surface-EMG measurements (including frequency analyses and muscle-fibre conduction estimations), twitch interpolation, magnetic stimulation of the motor cortex and analysis of changes in the readiness potential. Fatigue is a well-known phenomenon in both central and peripheral neurological disorders. Examples of the former conditions are multiple sclerosis, Parkinson's disease and stroke. Although it seems to be a universal symptom of many brain disorders, the unique characteristics of the concomitant fatigue also point to a specific relationship with several of these syndromes. As regards neuromuscular disorders, fatigue has been reported in patients with post-polio syndrome, myasthenia gravis, Guillain-Barré syndrome, facioscapulohumeral dystrophy, myotonic dystrophy and hereditary motor and sensory neuropathy type-I. More than 60% of all neuromuscular patients suffer from severe fatigue, a prevalence resembling that of patients with MS. Except for several rare myopathies with specific metabolic derangements leading to exercise-induced muscle fatigue, most studies have not identified a prominent peripheral cause for the fatigue in this population. In contrast, the central activation of the diseased neuromuscular system is generally found to be suboptimal. The

  13. Modelisation des effets physico-techniques pour la conception des ...

    African Journals Online (AJOL)

    automatisation dans les installations industrielles a besoin d'une régulation automatique des commandes des processus technologiques pour lesquelles certaines contraintes sont à relever compte tenu des exigences des innovations scientifiques de ...

  14. The Identification of Fatigue Resistant and Fatigue Susceptible Individuals

    National Research Council Canada - National Science Library

    Harrison, Richard; Chaiken, Scott; Harville, Donald; Fischer, Joseph; Fisher, Dion; Whitmore, Jeff

    2008-01-01

    The present study was designed to target two specific areas regarding fatigue. The primary purpose was to begin investigations into possible genetic markers linked to fatigue resistance and fatigue susceptibility...

  15. Fatigue Crack Topography.

    Science.gov (United States)

    1984-01-01

    alloys (2). [--I Fig. 6. Fatigue fracture in Nitrile- butadien rubber ( NBR ). Fig. 7. The characteristic features of fatigue fracture in press moulded...in plastics and even in rubber . It follows therefore, that fatigue fractures must also occur in the mineral layers of our earth or in the rock on...effective until the weakest point yields and forms a crack. To get a feeling for this process, you can imagine that the stressed article is made of rubber

  16. Fatigue 󈨛. Volume 2,

    Science.gov (United States)

    1987-06-01

    ROLAND STICKLER Absolute Fatigue Thresholds in Metallic 801 Materials - J.A. LEWIS Thermometrical Investigations on the Near 809 Threshold Fatigue...impurities reported by Semi- Alloys Inc. totaled less than 0.1%. Specimens were cast in a flat open aluminum mold. Each specimen was 6 mm thick and 12...and 2024-T351 Aluminum Alloy", in "Fatigue Crack Growth Threshold Concepts", D.L. Davidson, S. Suresh, editors, TMS-AIME. 1984, pp. 63-82. (2) Bailon

  17. Optimal Fatigue Testing

    DEFF Research Database (Denmark)

    Faber, Michael Havbro; Sørensen, John Dalsgaard; Kroon, I. B.

    1993-01-01

    life experiments for the same purpose. The methodology is basedon modern probabilistic concepts amd classical decision theory. The special case where the fatigue life experiments are given in terms of SN curves is considered in Particular. The proposed techniques are illustrated by an example.......This paper considers the reassessment of the reliability of tubular joints subjected to fatigue load. The reassessment is considered in two parts namely the task of utilizing new experimental data on fatigue life to update the reliability of the tubular joint ant the task of planning new fatigue...

  18. Fatigue-Arrestor Bolts

    Science.gov (United States)

    Onstott, Joseph W.; Gilster, Mark; Rodriguez, Sergio; Larson, John E.; Wickham, Mark D.; Schoonover, Kevin E.

    1995-01-01

    Bolts that arrest (or, more precisely, retard) onset of fatigue cracking caused by inelastic strains developed. Specifically developed to be installed in flange holes of unrestrained rocket engine nozzle. Fanges sometimes used to bolt nozzle to test stand; however, when rocket engine operated without this restraint, region around bolt holes experience severe inelastic strains causing fatigue cracking. Interference fits introduce compressive preloads that retard fatigue by reducing ranges of strains. Principle of these fatigue-arrestor bolts also applicable to holes in plates made of other materials and/or used for different purposes.

  19. Compressive Fatigue in Wood

    DEFF Research Database (Denmark)

    Clorius, Christian Odin; Pedersen, Martin Bo Uhre; Hoffmeyer, Preben

    1999-01-01

    An investigation of fatigue failure in wood subjected to load cycles in compression parallel to grain is presented. Small clear specimens of spruce are taken to failure in square wave formed fatigue loading at a stress excitation level corresponding to 80% of the short term strength. Four...... frequencies ranging from 0.01 Hz to 10 Hz are used. The number of cycles to failure is found to be a poor measure of the fatigue performance of wood. Creep, maximum strain, stiffness and work are monitored throughout the fatigue tests. Accumulated creep is suggested identified with damage and a correlation...

  20. variabilite des productions et des revenus des exploitations

    African Journals Online (AJOL)

    3Centre de coopération internationale en recherche agronomique pour le développement (CIRAD), UMR Innovation,. Montpellier, France. Doubangolo COULIBALY, Email kone_b@yahoo.fr. RESUME. La durabilité des systèmes de production à base de coton dans un contexte de variabilité des prix aux producteurs et de ...

  1. A three dimensional discrete dislocation dynamics modelling of the early cycles of fatigue in an austenitic stainless steel 316L: dislocation microstructure and damage analysis; Modelisation physique des stades precurseurs de l'endommagement en fatigue dans l'acier inoxydable austenitique 316L

    Energy Technology Data Exchange (ETDEWEB)

    Depres, Ch

    2005-07-01

    A numerical code modelling the collective behaviour of dislocations at a mesoscopic scale (Discrete Dislocation Dynamics code) is used to analyse the cyclic plasticity that occurs in surface grains of an AISI 316L stainless steel, in order to understand the plastic mechanism involved in crack initiation in fatigue. Firstly, the analyses of both the formation and the evolution of the dislocation microstructures show the crucial role of cross-slip played in the strain localization in the form of slip bands. As the cycling proceeds, the slip bands exhibit well-organized dislocation arrangements that substitute to dislocation tangles, involving specific interaction mechanisms between primary and deviate systems. Secondly, both the surface displacements generated by plastic slip and the distortion energy induced by the dislocation microstructure have been analysed. We find that an irreversible surface relief in the form of extrusion/intrusion can be induced by cyclic slip of dislocations. The number of cycles for the crack initiation follows a Manson-Coffin type law. The analyses of the concentration of the distortion energy and its repartition in the slip bands show that beneficial energetic zones may be present at the very beginning of the cycling, and that mode-II crack propagation in the surface grains results from a succession of micro-crack initiations along primary slip plane, which is facilitated by various effects (stress concentration due to surface relief, environment effects...). Finally, a dislocation-based model for cyclic plasticity is proposed from Discrete Dislocation Dynamics results. (author)

  2. Developpement d'un modele analytique pour l'analyse en elasticite lineaire de champs de deformation et contrainte au sein d'un polycristal. comparaison avec la methode des elements finis =

    Science.gov (United States)

    Bretin, Remy

    L'endommagement par fatigue des materiaux est un probleme courant dans de nombreux domaines, dont celui de l'aeronautique. Afin de prevenir la rupture par fatigue des materiaux il est necessaire de determiner leur duree de vie en fatigue. Malheureusement, dues aux nombreuses heterogeneites presentes, la duree de vie en fatigue peut fortement varier entre deux pieces identiques faites dans le meme materiau ayant subi les memes traitements. Il est donc necessaire de considerer ces heterogeneites dans nos modeles afin d'avoir une meilleure estimation de la duree de vie des materiaux. Comme premiere etape vers une meilleure consideration des heterogeneites dans nos modeles, une etude en elasticite lineaire de l'influence des orientations cristallographiques sur les champs de deformations et de contraintes dans un polycristal a ete realisee a l'aide de la methode des elements finis. Des correlations ont pu etre etablies a partir des resultats obtenus, et un modele analytique en elasticite lineaire prenant en compte les distributions d'orientations cristallographiques et les effets de voisinage a pu etre developpe. Ce modele repose sur les bases des modeles d'homogeneisation classique, comme le schema auto-coherent, et reprend aussi les principes de voisinage des automates cellulaires. En prenant pour reference les resultats des analyses elements finis, le modele analytique ici developpe a montre avoir une precision deux fois plus grande que le modele auto-coherent, quel que soit le materiau etudie.

  3. Fatigue Evaluation Algorithms: Review

    DEFF Research Database (Denmark)

    Passipoularidis, Vaggelis; Brøndsted, Povl

    series can be simulated. The predictions are validated against fatigue life data both from repeated block tests at a single stress ratio as well as against spectral fatigue using the WISPER, WISPERX and NEW WISPER load sequences on a Glass/Epoxy multidirectional laminate typical of a wind turbine rotor...

  4. Clinical neurophysiology of fatigue.

    NARCIS (Netherlands)

    Zwarts, M.J.; Bleijenberg, G.; Engelen, B.G.M. van

    2008-01-01

    Fatigue is a multidimensional concept covering both physiological and psychological aspects. Chronic fatigue is a typical symptom of diseases such as cancer, multiple sclerosis (MS), Parkinson's disease (PD) and cerebrovascular disorders but is also presented by people in whom no defined somatic

  5. Existence and structure of rare-earth mono-carbides: study of their low-temperature magnetic properties; Existence et structure des monocarbures de terres rares. Etude de leurs proprietes magnetiques a basses temperatures

    Energy Technology Data Exchange (ETDEWEB)

    Lallement, R [Commissariat a l' Energie Atomique, Centre d' Etudes Nucleaires de Fontenay-aux-Roses, 92 (France)

    1966-07-01

    There are two types of rare earth carbides, the first one is face-centered cubic, stable at high temperature, and very hypo-stoichiometric (formula MC{sub x} with 0.35 < x < 0.65); the other is rhombohedric, stable at lower temperature, with a formula M{sub 2}C. These two carbides are magnetically ordered at low temperatures (ferro or ferri-magnetism). They are highly anisotropic. A great part of the electric and magnetic properties can be explained from the following ideas: the M{sup 3+} ions are coupled via the conduction electrons, there are more conduction electrons in the carbides than in the metals, and there is some local order around the transition temperatures. (author) [French] Nous avons mis en evidence l'existence de deux carbures de terres rares, l'un de formule MC{sub x} (0,35 < x < 0,65) de structure cubique a faces centrees, stable a haute temperature, l'autre de formule M{sub 2}C, de structure rhomhoedrique, stable a temperature moyenne. Ces deux types de carbures presentent des phenomenes d'ordre magnetique a basses temperatures (ferro ou ferrimagnetisme). Ils sont caracterises par une forte anisotropie magnetique. Une grande partie des proprietes electriques et magnetiques s'explique a partir des hypotheses suivantes: a) Les ions M{sup 3+} sont couples entre eux par l'intermediaire des electrons de conduction; b) Le nombre d'electrons de conduction dans les carbures est plus grand que dans les metaux; c) Autour des temperatures de transition se manifestent des phenomenes d'ordre local. (auteur)

  6. Corrosion fatigue of steels

    International Nuclear Information System (INIS)

    Spaehn, H.; Wagner, G.H.

    1976-01-01

    Corrosion fatigue phenomena can be classified into two main groups according to the electrochemical state of the metal surface in the presence of electrolytes: the active and the passive state with an important sub-group of corrosion fatigue in the unstable passive state. The allowable stress for structures exposed to the conjoint action of corrosion and fatigue is influenced by many factors: kind of media, number of cycles, frequency, mean stress, size, notches, loading mode, alloy composition and mechanical strength. A critical literature review shows contradictory results if a classification by the electrochemical surface state is not applied. Case histories and counter measures illustrate the practical importance of corrosion fatigue in many branches of industry as well as the urgent need for a better knowledge about the mutual influence of the phenomena to get rules by which the engineer can appraise the risk of corrosion fatigue. (orig.) [de

  7. Examining fatigue in COPD

    DEFF Research Database (Denmark)

    Al-Shair, Khaled; Muellerova, Hana; Yorke, Janelle

    2012-01-01

    ABSTRACT: INTRODUCTION: Fatigue is a disruptive symptom that inhibits normal functional performance of COPD patients in daily activities. The availability of a short, simple, reliable and valid scale would improve assessment of the characteristics and influence of fatigue in COPD. METHODS......: At baseline, 2107 COPD patients from the ECLIPSE cohort completed the Functional Assessment of Chronic Illness Therapy Fatigue (FACIT-F) scale. We used well-structured classic method, the principal components analysis (PCA) and Rasch analysis for structurally examining the 13-item FACIT-F. RESULTS: Four items...... were less able to capture fatigue characteristics in COPD and were deleted. PCA was applied to the remaining 9 items of the modified FACIT-F and resulted in three interpretable dimensions: i) general (5 items); ii) functional ability (2 items); and iii) psychosocial fatigue (2 items). The modified...

  8. Civili, langue des Baloango

    DEFF Research Database (Denmark)

    Mavoungou, Paul Achille; Ndinga-Koumba-Binza, Hugues Steve

    , Congo, Angola, etc.) issus de la décolonisation. Il présente de façon succincte quelques phénomènes historiques, phonologiques, morphosyntaxiques, homonymiques et analogiques de la langue. Des faits sémantiques des emprunts linguistiques y sont également décrits dans le cadre des changements...

  9. Des racines et des ailes

    Directory of Open Access Journals (Sweden)

    Stéphanie Vincent-Geslin

    2012-05-01

    Full Text Available Les mobilités pendulaires semblent être en augmentation en Europe depuis une dizaine d’années. Cette croissance du temps passé à se déplacer amène à remettre en question la conjecture de Zahavi et apparaît relativement inexplicable en regard du paradigme classique de l’acteur rationnel traditionnellement utilisé dans le champ des transports. Si, dans la littérature, les temps de déplacements sont principalement expliqués par le contexte résidentiel, la forme urbaine et le travail, ce cadre explicatif ne dit rien des processus de décision eux-mêmes qui amènent aux pendularités intensives.À partir d’une enquête qualitative menée auprès de pendulaires français, suisses et belges, cette contribution propose d’analyser les arbitrages et les éléments déterminants des processus de la grande pendularité. Les mobilités quotidiennes pendulaires apparaissent comme le résultat de compromis entre activité professionnelle, attachement résidentiel et choix de vie et prennent ainsi la forme de stratégies de conciliation entre vie privée et vie professionnelle. Ces mobilités spatiales permettent alors paradoxalement la préservation des ancrages résidentiels, sociaux et familiaux.Roots and wings. Long-distance commuting patterns, or how to conciliate professional and personal lifeLong-distance commuting patterns appear to be increasing in Europe over the last ten years. These raising mobility patterns lead to reappraise the Zahavi conjecture and appear largely inexplicable by the classical rational actor paradigm traditionally used in transportation research. In literature, commuting is mainly explained by residential contexts, urban forms and job. Nevertheless this theoretical frame says little about the decision-making processes themselves. Based on a qualitative survey conducted in three European countries - France, Belgium and Switzerland – among a population of high commuters, this paper proposes an analysis of

  10. Production of intense metallic ion beams in order of isotopic separations; Production de faisceaux intenses d'ions metalliques en vue de la separation des isotopes

    Energy Technology Data Exchange (ETDEWEB)

    Sarrouy, J L [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1955-07-01

    We describe an isotope separator with magnetic sector of 60 deg that permits, with a process of neutralization of the space charge, to use efficiently intense ion beams. The sources of realized ions provide ionic debits of 10 mA. This present work deals who to obtain intense ion beams (10 to 15 mA), different processes of ion currents measurement, as well as the study of the phenomenon of space charge neutralization. The second part of this memory will be on the survey and the adaptation on the source of various type of oven permitting to spray and to ionize metals directly. By order of increasing difficulty of vaporization, we reached the chromium. (M.B.) [French] 0n decrit un separateur d'isotope a secteur magnetique de 60 deg qui permet, grace a un procede de neutralisation de la charge d'espace, d'utiliser efficacement des faisceaux d'ions intenses. Les sources d'ions realisees fournissent des debits ioniques de 10 mA. Ce present travail porte sur l'obtention de faisceaux d'ions faisceaux d'ions intenses (10 a 15 mA), des differents procedes de mesures des courants d'ions, ainsi que l'etude du phenomene de neutralisation de charge d'espace. La deuxieme partie de ce memoire portera sur l'etude et l'adaptation sur la source de divers type de four permettant de vaporiser et d'ioniser directement les metaux. Par ordre de difficulte croissantes de vaporisations, nous avons atteint le chrome. (M.B.)

  11. Fatigue evaluation algorithms: Review

    Energy Technology Data Exchange (ETDEWEB)

    Passipoularidis, V.A.; Broendsted, P.

    2009-11-15

    A progressive damage fatigue simulator for variable amplitude loads named FADAS is discussed in this work. FADAS (Fatigue Damage Simulator) performs ply by ply stress analysis using classical lamination theory and implements adequate stiffness discount tactics based on the failure criterion of Puck, to model the degradation caused by failure events in ply level. Residual strength is incorporated as fatigue damage accumulation metric. Once the typical fatigue and static properties of the constitutive ply are determined,the performance of an arbitrary lay-up under uniaxial and/or multiaxial load time series can be simulated. The predictions are validated against fatigue life data both from repeated block tests at a single stress ratio as well as against spectral fatigue using the WISPER, WISPERX and NEW WISPER load sequences on a Glass/Epoxy multidirectional laminate typical of a wind turbine rotor blade construction. Two versions of the algorithm, the one using single-step and the other using incremental application of each load cycle (in case of ply failure) are implemented and compared. Simulation results confirm the ability of the algorithm to take into account load sequence effects. In general, FADAS performs well in predicting life under both spectral and block loading fatigue. (author)

  12. Prolonged unexplained fatigue in paediatrics

    NARCIS (Netherlands)

    Bakker, R.J.

    2010-01-01

    Prolonged Unexplained Fatigue in Paediatrics. Fatigue, as the result of mental or physical exertion, will disappear after rest, drinks and food. Fatigue as a symptom of illness will recover with the recovering of the illness. But when fatigue is ongoing for a long time, and not the result of

  13. Insomnia and Fatigue

    Science.gov (United States)

    ... week at work or a busy day of hiking or chasing a toddler. Fatigue related to cancer ... Coworkers About Your Diagnosis Work Accommodations and Disability Benefits Offsetting the “Hidden Costs” of Breast Cancer Getting ...

  14. Brain Tumors and Fatigue

    Science.gov (United States)

    ... Subscribe for e-updates Please leave this field empty Fatigue SHARE Home > Treatment and Care > Side Effects ... take-out food tends to be high in calories, fat and sodium and low in energy-boosting ...

  15. Hyperthermia and fatigue

    DEFF Research Database (Denmark)

    Nybo, Lars

    2008-01-01

    The present review addresses mechanisms of importance for hyperthermia-induced fatigue during short intense activities and prolonged exercise in the heat. Inferior performance during physical activities with intensities that elicit maximal oxygen uptake is to a large extent related to perturbation...... of the cardiovascular function, which eventually reduces arterial oxygen delivery to the exercising muscles. Accordingly, aerobic energy turnover is impaired and anaerobic metabolism provokes peripheral fatigue. In contrast, metabolic disturbances of muscle homeostasis are less important during prolonged exercise...... in the heat, because increased oxygen extraction compensates for the reduction in systemic blood flow. The decrease in endurance seems to involve changes in the function of the central nervous system (CNS) that lead to fatigue. The CNS fatigue appears to be influenced by neurotransmitter activity...

  16. Fatigue in soccer

    DEFF Research Database (Denmark)

    Mohr, Magni; Krustrup, Peter; Bangsbo, Jens

    2005-01-01

    This review describes when fatigue may develop during soccer games and the potential physiological mechanisms that cause fatigue in soccer. According to time?-?motion analyses and performance measures during match-play, fatigue or reduced performance seems to occur at three different stages......, acidity or the breakdown of creatine phosphate. Instead, it may be related to disturbances in muscle ion homeostasis and an impaired excitation of the sarcolemma. Soccer players' ability to perform maximally is inhibited in the initial phase of the second half, which may be due to lower muscle...... concentrations in a considerable number of individual muscle fibres. In a hot and humid environment, dehydration and a reduced cerebral function may also contribute to the deterioration in performance. In conclusion, fatigue or impaired performance in soccer occurs during various phases in a game, and different...

  17. The Recognition Of Fatigue

    DEFF Research Database (Denmark)

    Elsass, Peter; Jensen, Bodil; Mørup, Rikke

    2007-01-01

    Elsass P., Jensen B., Morup R., Thogersen M.H. (2007). The Recognition Of Fatigue: A qualitative study of life-stories from rehabilitation clients. International Journal of Psychosocial Rehabilitation. 11 (2), 75-87......Elsass P., Jensen B., Morup R., Thogersen M.H. (2007). The Recognition Of Fatigue: A qualitative study of life-stories from rehabilitation clients. International Journal of Psychosocial Rehabilitation. 11 (2), 75-87...

  18. New Instruments and Principles for the Dimensional Measurement and Measurement of Spacing of Reactor Components; Nouveaux Instruments et Procedes de Mesure des Dimensions et de l'Espacement des Elements d'un Reacteur; Novye pribory i printsipy izmereniya razmerov i raspolozheniya komponentov reaktora; Nuevos Instrumentos y Principios para Medir las Dimensiones y la Separacion Entre Componentes de Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Mueller, P. [Institut Dr. Foerster, Reutlingen, Federal Republic of Germany (Germany)

    1965-09-15

    instrument for reactor components are discussed. Special attention is given to the possibility of using a small and versatile pick-up by means of manipulators in the ''hot'' zones and on ''hot'' materials. The increase of surface roughness with increasing irradiation dose is discussed. (author) [French] Full text: L'auteur presente les problemes de mesure de l'epaisseur de feuilles et des parois de tubes et recipients en aciers austenitiques ou en metaux non ferreux. Deux methodes de mesure des epaisseurs sans contact sont discutees: la mesure, par courants de Foucault, de l'epaisseur de feuilles et des parois de recipients en metaux non ferreux ou en aciers austenitiques, au moyen de bobines se deplacant le long des pieces a examiner: la mesure, par courants de Foucault, de l'epaisseur des parois de tubes, au moyen de bobines dans lesquelles se deplacent les pieces a examiner. L'auteur decrit des instruments appropries et le mode d'utilisation. Il discute egalement la mesure de l'epaisseur des parois de parties constitutives de reacteurs, en metaux non ferreux, par la 'methode de la bille magnetique' et explique le principe de ce nouveau type de mesure et son domaine d'utilisation - notamment pour les mesures par points; il decrit un instrument approprie. L'auteur examine la mesure des revetements non magnetiques de materiaux magnetiques; il explique les principes de mesure (methodes fondees sur les champs magnetiques des courants continus et des courants alternatifs) et decrit des instruments de mesure de revetements non magnetiques dont l'epaisseur varie entre 3 {mu}m et 20 mm. Il expose le probleme special de la mesure des depots de stellite sur les parois en aciers ferritiques des cuves de reacteurs. La mesure des revetements non conducteurs de metaux non ferreux est etudiee. Le memoire explique le principe de mesure (courants de Foucault). Il decrit un instrument approprie et donne des exemples de mesures typiques. L'auteur examine egalement la mesure sans contact, en

  19. Experiences of Fatigue at Sea

    DEFF Research Database (Denmark)

    Zhao, Zhiwei; Jepsen, Jørgen Riis; Chen, Zhonglong

    2016-01-01

    Fatigue has negative impacts on the general working population as well as on seafarers. In order to study seafarers’ fatigue, a questionnaire-base survey was conducted to gain information about potential risk factors for fatigue and construct indexes indicating fatigue. The study applies T-test t......-test to compare strata of seafarers to analyse work and sleep patterns in global seafaring. Qualitative analysis are also employed to explore the impacts of fatigue on seafarer’s occupational health and safety.......Fatigue has negative impacts on the general working population as well as on seafarers. In order to study seafarers’ fatigue, a questionnaire-base survey was conducted to gain information about potential risk factors for fatigue and construct indexes indicating fatigue. The study applies T...

  20. Thermal fatigue. Materials modelling

    International Nuclear Information System (INIS)

    Siegele, D.; Fingerhuth, J.; Mrovec, M.

    2012-01-01

    In the framework of the ongoing joint research project 'Thermal Fatigue - Basics of the system-, outflow- and material-characteristics of piping under thermal fatigue' funded by the German Federal Ministry of Education and Research (BMBF) fundamental numerical and experimental investigations on the material behavior under transient thermal-mechanical stress conditions (high cycle fatigue V HCF and low cycle fatigue - LCF) are carried out. The primary objective of the research is the further development of simulation methods applied in safety evaluations of nuclear power plant components. In this context the modeling of crack initiation and growth inside the material structure induced by varying thermal loads are of particular interest. Therefore, three scientific working groups organized in three sub-projects of the joint research project are dealing with numerical modeling and simulation at different levels ranging from atomistic to micromechanics and continuum mechanics, and in addition corresponding experimental data for the validation of the numerical results and identification of the parameters of the associated material models are provided. The present contribution is focused on the development and experimental validation of material models and methods to characterize the damage evolution and the life cycle assessment as a result of thermal cyclic loading. The individual purposes of the subprojects are as following: - Material characterization, Influence of temperature and surface roughness on fatigue endurances, biaxial thermo-mechanical behavior, experiments on structural behavior of cruciform specimens and scatter band analysis (IfW Darmstadt) - Life cycle assessment with micromechanical material models (MPA Stuttgart) - Life cycle assessment with atomistic and damage-mechanical material models associated with material tests under thermal fatigue (Fraunhofer IWM, Freiburg) - Simulation of fatigue crack growth, opening and closure of a short crack under

  1. Des Connaissances Aux Politiques

    International Development Research Centre (IDRC) Digital Library (Canada)

    Les synergies ont été mises en commun au fur et à mesure des progrès de la recherche. .... Recherche normative (sur le rôle et la performance des institutions .... Système national d'information sur la gestion environnementale connecté à 19 ...... Un fort contrôle centralisé sur l'élaboration des politiques nationales peut ...

  2. Thermal fatigue of beryllium

    International Nuclear Information System (INIS)

    Deksnis, E.; Ciric, D.; Falter, H.

    1995-01-01

    Thermal fatigue life of S65c beryllium castellated to a geometry 6 x 6 x (8-10)mm deep has been tested for steady heat fluxes of 3 MW/m 2 to 5 MW/m 2 and under pulsed heat fluxes (10-20 MW/m 2 ) for which the time averaged heat flux is 5 MW/m 2 . These tests were carried out in the JET neutral beam test facility A test sequence with peak surface temperatures ≤ 600 degrees C produced no visible fatigue cracks. In the second series of tests, with T max ≤ 750 degrees C evidence for fatigue appeared after a minimum of 1350 stress cycles. These fatigue data are discussed in view of the observed lack of thermal fatigue in JET plasma operations with beryllium PFC. JET experience with S65b and S65c is reviewed; recent operations with Φ = 25 MW/m 2 and sustained melting/resolidification are also presented. The need for a failure criterion for finite element analyses of Be PFC lifetimes is discussed

  3. Évaluation des pratiques agricoles des légumes feuilles : le cas des ...

    African Journals Online (AJOL)

    SARAH

    30 sept. 2017 ... ... de Biochimie et Immunologie Appliquée, Centre de Recherche en Sciences Biologiques, Alimentaires et .... l'intoxication des agriculteurs et des consommateurs, ... source d'alimentation en eau et au pouvoir d'achat des.

  4. Modafinil May Alleviate Poststroke Fatigue

    DEFF Research Database (Denmark)

    Poulsen, Mai Bang; Damgaard, Bodil; Zerahn, Bo

    2015-01-01

    was randomized, double-blinded, and placebo-controlled. Patients were treated with 400-mg modafinil or placebo for 90 days. Assessments were done at inclusion, 30, 90, and 180 days. The primary end point was fatigue at 90 days measured by the Multidimensional Fatigue Inventory-20 general fatigue domain......BACKGROUND AND PURPOSE: Poststroke fatigue is common and reduces quality of life. Current evidence for intervention is limited, and this is the first placebo-controlled trial to investigate treatment of poststroke fatigue with the wakefulness promoting drug modafinil. METHODS: The trial....... Secondary end points included the Fatigue Severity Scale, the Montreal Cognitive Assessment, the modified Rankin Scale and the Stroke-specific quality of Life questionnaire. Adult patients with a recent stroke achieving a score of ≥12 on the Multidimensional Fatigue Inventory-20 general fatigue domain were...

  5. Fatigue design 1998

    Energy Technology Data Exchange (ETDEWEB)

    Marquis, G.; Solin, J. [eds.] [VTT Manufacturing Technology, Espoo (Finland)

    1998-12-31

    These preprints contain the presentations to be delivered at the Fatigue Design 1998 symposium held on May 26-29, 1998 in Espoo. Fatigue Design 1998 is the tenth in a series of VTT symposia addressing the challenge of fatigue of materials, components and structures. Previous international events were in 1992 and 1995. The key theme of the current meeting is `RELIABILITY`. The two volumes (VTT symposium 181-182) represent 56 contributions by authors representing 26 countries. Emphasis has been given to application oriented research topics that report new technologies, new uses of existing methods and case studies. The objective of the symposium is to bring together researchers and engineers to share experiences and new innovations in designing reliable components to resist alternating loads. (orig.)

  6. Near threshold fatigue testing

    Science.gov (United States)

    Freeman, D. C.; Strum, M. J.

    1993-01-01

    Measurement of the near-threshold fatigue crack growth rate (FCGR) behavior provides a basis for the design and evaluation of components subjected to high cycle fatigue. Typically, the near-threshold fatigue regime describes crack growth rates below approximately 10(exp -5) mm/cycle (4 x 10(exp -7) inch/cycle). One such evaluation was recently performed for the binary alloy U-6Nb. The procedures developed for this evaluation are described in detail to provide a general test method for near-threshold FCGR testing. In particular, techniques for high-resolution measurements of crack length performed in-situ through a direct current, potential drop (DCPD) apparatus, and a method which eliminates crack closure effects through the use of loading cycles with constant maximum stress intensity are described.

  7. Effect of the coupling between electronic structure and crystalline structure on some properties of transition metals; Couplage entre structure electronique et structure cristalline: effet sur quelques proprietes des metaux de transition

    Energy Technology Data Exchange (ETDEWEB)

    Nastar, M

    1994-10-14

    The elastic constants, energetic stabilities and vacancy formation energies in transition metals are calculated within a Tight Binding model. In order to outline the effect of the electronic structure, these properties are represented as functions of band filling. The variation of the shear elastic constants of hexagonal close packed (HCP), body centered cubic (BCC) and face centered cubic (FCC) structures, is in contrast with the roughly parabolic behavior of bulk modulus. The general trends are in very good agreement with available experimental and `ab initio` data. The vacancy formation energy in the BCC structure shows strong deviations from bell shape behavior with a maximum corresponding approximately to the band filling of group 6. This band filling effect contributes to the noticeable decrease of the self diffusion rate between group 4 and group 6. We demonstrate that the abrupt increase of the C` elastic constant, the NT{sub 1} (0.-1.1) phonon frequency, the energy differences between BCC and HCP and between FCC and HCP as well as the vacancy formation energy, that occurs when going from Zr to Mo, is related to the presence of a pseudo-gap in the density of states of the BCC structure. Using the recursion method, we show that the general trends of these properties are correctly reproduced when considering only a few moments of the density of states (about 6). On the other hand, details such as the elastic constant singularities, are displayed only with an exact calculation of the density of states. (Author). 173 refs., 84 figs., 5 tabs.

  8. Mathematical modelling of municipal solid waste incineration and thermodynamic study of the behaviour of heavy metals; Modelisation de l'incineration sur grille d'ordures menageres et approche thermodynamique du comportement des metaux lourds

    Energy Technology Data Exchange (ETDEWEB)

    Menard, Y

    2003-07-15

    The present dissertation describes experimental and theoretical investigations undertaken for the mathematical modelling of municipal solid waste (MSW) incineration in a grate furnace and the thermodynamic study of the speciation of heavy metals (HM), originally contained into MSW, during combustion. Thermogravimetric and gaseous analysis (mass spectrometry and gas chromatography) experiments were performed on MSW samples to get pyrolysis kinetics and to quantify the gaseous species that evolve during the primary reactions of devolatilization. Other experiments were carried out in a fixed bed pilot-scale reactor: the combustion of two types of solids (wood chips and MSW) was studied, and the influence of operating conditions (flow rate, staging and temperature of the primary air) as well as fuel characteristics (moisture content, inert material fraction, lower calorific value) was investigated. A mathematical model was developed for simulating the combustion of a solid fuel, either in a fixed bed reactor or on the grate of an incineration plant. It has been validated by comparison of the calculated results and the experiments carried out on the pilot. Thanks to this model, we have been able to localize the different processes taking place in the fuel bed and to evaluate the influence of the operating conditions on the combustion efficiency. Numerical simulations of the gas flow and combustion in the post-combustion chamber and the heater of an incineration plant were performed using the CFD code FLUENT. The local thermal conditions as well as local gaseous species concentrations obtained from these simulations were eventually used to carry out thermodynamic calculations of the speciation of HM during incineration. (author)

  9. Dislocations and elementary processes of plasticity in FCC metals: atomic scale simulations; Dislocations et processus elementaires de la plasticite dans les metaux CFC: apports des simulations a l'echelle atomique

    Energy Technology Data Exchange (ETDEWEB)

    Rodney, D

    2000-07-01

    We present atomic-scale simulations of two elementary processes of FCC crystal plasticity. The first study consists in the simulation by molecular dynamics, in a nickel crystal, of the interactions between an edge dislocation and glissile interstitial loops of the type that form under irradiation in displacement cascades. The simulations show various atomic-scale interaction processes leading to the absorption and drag of the loops by the dislocation. These reactions certainly contribute to the formation of the 'clear bands' observed in deformed irradiated materials. The simulations also allow to study quantitatively the role of the glissile loops in irradiation hardening. In particular, dislocation unpinning stresses for certain pinning mechanisms are evaluated from the simulations. The second study consists first in the generalization in three dimensions of the quasi-continuum method (QCM), a multi-scale simulation method which couples atomistic techniques and the finite element method. In the QCM, regions close to dislocation cores are simulated at the atomic-scale while the rest of the crystal is simulated with a lower resolution by means of a discretization of the displacement fields using the finite element method. The QCM is then tested on the simulation of the formation and breaking of dislocation junctions in an aluminum crystal. Comparison of the simulations with an elastic model of dislocation junctions shows that the structure and strength of the junctions are dominated by elastic line tension effects, as is assumed in classical theories. (author)

  10. Mathematical modelling of municipal solid waste incineration and thermodynamic study of the behaviour of heavy metals; Modelisation de l'incineration sur grille d'ordures menageres et approche thermodynamique du comportement des metaux lourds

    Energy Technology Data Exchange (ETDEWEB)

    Menard, Y.

    2003-07-15

    The present dissertation describes experimental and theoretical investigations undertaken for the mathematical modelling of municipal solid waste (MSW) incineration in a grate furnace and the thermodynamic study of the speciation of heavy metals (HM), originally contained into MSW, during combustion. Thermogravimetric and gaseous analysis (mass spectrometry and gas chromatography) experiments were performed on MSW samples to get pyrolysis kinetics and to quantify the gaseous species that evolve during the primary reactions of devolatilization. Other experiments were carried out in a fixed bed pilot-scale reactor: the combustion of two types of solids (wood chips and MSW) was studied, and the influence of operating conditions (flow rate, staging and temperature of the primary air) as well as fuel characteristics (moisture content, inert material fraction, lower calorific value) was investigated. A mathematical model was developed for simulating the combustion of a solid fuel, either in a fixed bed reactor or on the grate of an incineration plant. It has been validated by comparison of the calculated results and the experiments carried out on the pilot. Thanks to this model, we have been able to localize the different processes taking place in the fuel bed and to evaluate the influence of the operating conditions on the combustion efficiency. Numerical simulations of the gas flow and combustion in the post-combustion chamber and the heater of an incineration plant were performed using the CFD code FLUENT. The local thermal conditions as well as local gaseous species concentrations obtained from these simulations were eventually used to carry out thermodynamic calculations of the speciation of HM during incineration. (author)

  11. Fatigue Strength of Weathering Steel

    Czech Academy of Sciences Publication Activity Database

    Kunz, Ludvík; Lukáš, Petr; Klusák, Jan

    2012-01-01

    Roč. 18, č. 1 (2012), s. 18-22 ISSN 1392-1320 Grant - others:GA MPO(CZ) FT/TA5/076 Institutional support: RVO:68081723 Keywords : fatigue of weathering steel * corrosion pits * fatigue notch factor Subject RIV: JL - Materials Fatigue, Friction Mechanics Impact factor: 0.522, year: 2012

  12. Fatigue data compilation and evaluation of fatigue on design

    International Nuclear Information System (INIS)

    Nyilas, A.

    1985-05-01

    The aim of this report is a review of the available fatigue data of various materials necessary for the design of large superconducting magnets for fusion. One of the primary objectives of this work is to present a broad outline of the low temperature fatigue data of relevant materials within the scope of available data. Besides the classical fatigue data of materials the fatigue crack propagation measurements are outlined widely. The existing recommendations for the design of cryogenic structures are described. A brief introduction of fracture mechanics as well as a historical background of the development of our present day understanding of fatigue has been done. (orig.) [de

  13. Gestion des risques

    CERN Document Server

    Louisot, Jean-Paul

    2009-01-01

    Depuis le début du lie siècle, la gestion des risques connaît une véritable révolution culturelle. Jusqu'alors fonction technique, centrée autour de l'achat de couverture d'assurances, elle est devenue une discipline managériale et transversale : une valise d'instruments que chaque manager doit connaître et appliquer quels que soient son domaine de compétence et ses missions au sein de l'organisation. En effet, la gestion des risques est une culture qui doit être assimilée par chacun des acteurs. C'est précisément l'ambition des 101 questions rassemblées dans cet ouvrage : apporter à chaque manager d'entreprise, de collectivité, d'établissement de santé..., des réponses claires au " pourquoi " et au " comment " : Comment identifier les risques ? Comment analyser les risques ? Quels sont les objectifs de la gestion des risques ? Une carte des risques pour quoi faire ? Pourquoi faut-il financer les risques ? Les entreprises ont-elles des responsabilités pénales ? En quoi consiste la gestion...

  14. La gouvernance des risques naturels et la problematique des ...

    African Journals Online (AJOL)

    Depuis quelques années, la gouvernance des risques naturels dus aux inondations remet en cause les processus de mise en oeuvre des politiques urbaines et la qualité de la structure des aménagements dans les grandes villes du Golfe de Guinée. La perception de la gouvernance et l'application des politiques de ...

  15. Fatigue and thermal fatigue of Pb-Sn solder joints

    International Nuclear Information System (INIS)

    Frear, D.; Grivas, D.; McCormack, M.; Tribula, D.; Morris, J.W. Jr.

    1987-01-01

    This paper presents a fundamental investigation of the fatigue and thermal fatigue characteristics, with an emphasis on the microstructural development during fatigue, of Sn-Pb solder joints. Fatigue tests were performed in simple shear on both 60Sn-40Pb and 5Sn-95Pb solder joints. Isothermal fatigue tests show increasing fatigue life of 60Sn-40Pb solder joints with decreasing strain and temperature. In contrast, such behavior was not observed in the isothermal fatigue of 5Sn-95Pb solder joints. Thermal fatigue results on 60Sn-40Pb solder cycled between -55 0 C and 125 0 C show that a coarsened region develops in the center of the joint. Both Pb-rich and Sn-rich phases coarsen, and cracks form within these coarsened regions. The failure mode 60Sn-40Pb solder joints in thermal and isothermal fatigue is similar: cracks form intergranularly through the Sn-rich phase or along Sn/Pb interphase boundaries. Extensive cracking is found throughout the 5Sn-95Pb joint for both thermal and isothermal fatigue. In thermal fatigue the 5Sn-95Pb solder joints failed after fewer cycles than 60Sn-40Pb

  16. Fatigue approach for addressing environmental effects in fatigue usage calculation

    Energy Technology Data Exchange (ETDEWEB)

    Wilhelm, Paul; Rudolph, Juergen [AREVA GmbH, Erlangen (Germany); Steinmann, Paul [Erlangen-Nuremberg Univ., erlangen (Germany). Chair of Applied Mechanics

    2015-04-15

    Laboratory tests consider simple trapezoidal, triangle, and sinusoidal signals. However, actual plant components are characterized by complex loading patterns and periods of holds. Fatigue tests in water environment show, that the damage from a realistic strain variation or the presence of hold-times within cyclic loading results in an environmental reduction factor (Fen) only half that of a simple waveform. This study proposes a new fatigue approach for addressing environmental effects in fatigue usage calculation for class 1 boiler and pressure vessel reactor components. The currently accepted method of fatigue assessment has been used as a base model and all cycles, which have been comparable with realistic fatigue tests, have been excluded from the code-based fatigue calculation and evaluated directly with the test data. The results presented show that the engineering approach can successfully be integrated in the code-based fatigue assessment. The cumulative usage factor can be reduced considerably.

  17. The Nature of Fatigue in Chronic Fatigue Syndrome.

    Science.gov (United States)

    Olson, Karin; Zimka, Oksana; Stein, Eleanor

    2015-10-01

    In this article, we report the findings of our study on the nature of fatigue in patients diagnosed with chronic fatigue syndrome. Using ethnoscience as a design, we conducted a series of unstructured interviews and card sorts to learn more about how people with chronic fatigue syndrome describe fatigue. Participants (N = 14) described three distinct domains: tiredness, fatigue, and exhaustion. Most participants experienced tiredness prior to diagnosis, fatigue during daily life, and exhaustion after overexertion. We also discuss participants' ability to adapt to a variety of stressors and prevent shifts to exhaustion, and relate our findings to stress theory and other current research. Primary strategies that promoted adaptation to stressors included pacing and extended rest periods. These findings can aid health care professionals in detecting impending shifts between tiredness, fatigue, and exhaustion and in improving adaptive strategies, thereby improving quality of life. © The Author(s) 2015.

  18. Fatigue approach for addressing environmental effects in fatigue usage calculation

    International Nuclear Information System (INIS)

    Wilhelm, Paul; Rudolph, Juergen; Steinmann, Paul

    2015-01-01

    Laboratory tests consider simple trapezoidal, triangle, and sinusoidal signals. However, actual plant components are characterized by complex loading patterns and periods of holds. Fatigue tests in water environment show, that the damage from a realistic strain variation or the presence of hold-times within cyclic loading results in an environmental reduction factor (Fen) only half that of a simple waveform. This study proposes a new fatigue approach for addressing environmental effects in fatigue usage calculation for class 1 boiler and pressure vessel reactor components. The currently accepted method of fatigue assessment has been used as a base model and all cycles, which have been comparable with realistic fatigue tests, have been excluded from the code-based fatigue calculation and evaluated directly with the test data. The results presented show that the engineering approach can successfully be integrated in the code-based fatigue assessment. The cumulative usage factor can be reduced considerably.

  19. Fatigue of dental ceramics.

    Science.gov (United States)

    Zhang, Yu; Sailer, Irena; Lawn, Brian R

    2013-12-01

    Clinical data on survival rates reveal that all-ceramic dental prostheses are susceptible to fracture from repetitive occlusal loading. The objective of this review is to examine the underlying mechanisms of fatigue in current and future dental ceramics. The nature of various fatigue modes is elucidated using fracture test data on ceramic layer specimens from the dental and biomechanics literature. Failure modes can change over a lifetime, depending on restoration geometry, loading conditions and material properties. Modes that operate in single-cycle loading may be dominated by alternative modes in multi-cycle loading. While post-mortem examination of failed prostheses can determine the sources of certain fractures, the evolution of these fractures en route to failure remains poorly understood. Whereas it is commonly held that loss of load-bearing capacity of dental ceramics in repetitive loading is attributable to chemically assisted 'slow crack growth' in the presence of water, we demonstrate the existence of more deleterious fatigue mechanisms, mechanical rather than chemical in nature. Neglecting to account for mechanical fatigue can lead to gross overestimates in predicted survival rates. Strategies for prolonging the clinical lifetimes of ceramic restorations are proposed based on a crack-containment philosophy. Copyright © 2013 Elsevier Ltd. All rights reserved.

  20. Caffeine, fatigue, and cognition

    NARCIS (Netherlands)

    Lorist, M.M.; Tops, M.

    2003-01-01

    Effects of caffeine and fatigue are discussed with special attention to adenosine-dopamine interactions. Effects of caffeine on human cognition are diverse. Behavioural measurements indicate a general improvement in the efficiency of information processing after caffeine, while the EEG data support

  1. Chronic fatigue syndrome.

    NARCIS (Netherlands)

    Prins, J.B.; Meer, J.W.M. van der; Bleijenberg, G.

    2006-01-01

    During the past two decades, there has been heated debate about chronic fatigue syndrome (CFS) among researchers, practitioners, and patients. Few illnesses have been discussed so extensively. The existence of the disorder has been questioned, its underlying pathophysiology debated, and an effective

  2. Incompatibility and Mental Fatigue

    Science.gov (United States)

    Herzog, Thomas R.; Hayes, Lauren J.; Applin, Rebecca C.; Weatherly, Anna M.

    2011-01-01

    A straightforward prediction from attention restoration theory is that the level of incompatibility in a person's life should be positively correlated with that person's level of mental (or directed attention) fatigue. The authors tested this prediction by developing a new self-report measure of incompatibility in which they attempted to isolate…

  3. Are nurses able to assess fatigue, exertion fatigue and types of fatigue in residential home patients?

    NARCIS (Netherlands)

    Tiesinga, L.J.; Dijkstra, Ate; Dassen, T.W.N.; Halfens, R.J.G.; van den Heuvel, W.J.A.

    Although fatigue is recognized as a subjective, generalized, extensive and disabling health care problem with a relatively high prevalence among the chronically ill, there have been no studies to show whether nurses caring for fatigued subjects are able to accurately assess the level of fatigue that

  4. Muscle Deoxygenation Causes Muscle Fatigue

    Science.gov (United States)

    Murthy, G.; Hargens, A. R.; Lehman, S.; Rempel, D.

    1999-01-01

    Muscle fatigue is a common musculoskeletal disorder in the work place, and may be a harbinger for more disabling cumulative trauma disorders. Although the cause of fatigue is multifactorial, reduced blood flow and muscle oxygenation may be the primary factor in causing muscle fatigue during low intensity muscle exertion. Muscle fatigue is defined as a reduction in muscle force production, and also occurs among astronauts who are subjected to postural constraints while performing lengthy, repetitive tasks. The objectives of this research are to: 1) develop an objective tool to study the role of decreased muscle oxygenation on muscle force production, and 2) to evaluate muscle fatigue during prolonged glovebox work.

  5. Photonique des Morphos

    CERN Document Server

    Berthier, Serge

    2010-01-01

    La photonique est déjà présente dans notre vie quotidienne, et on attend maintenant que la manipulation des photons permette aussi le traitement logique des informations. Cependant, l’élément de base qui permet cette manipulation de la lumière, le cristal photonique, est d’une réalisation complexe et mal contrôlée. Dans la course à la maîtrise de la lumière, les structures photoniques naturelles ont beaucoup à nous apprendre. C’est ce que nous montre Serge Berthier qui étudie dans ce livre la structure des écailles des Morphos. Tenant compte de l’essor récent des approches biomimétiques, il présente de manière détaillée plus de dix-huit techniques expérimentales utilisées pour ses analyses, ainsi que les diverses approches théoriques développées pour la modélisation de structures multi-échelles complexes. Première étude quasi-exhaustive des structures fines d’un genre et des propriétés optiques ainsi que colorimétriques générées, ce livre fournit aux entomologiste...

  6. Droit des organisations internationales

    CERN Document Server

    Sorel, Jean-Marc; Ndior, Valère

    2013-01-01

    Cet ouvrage collectif offre aux enseignants et chercheurs en droit international, aux praticiens et aux étudiants, une analyse actualisée du droit des organisations internationales. Il dresse en cinq parties un tableau, illustré par des exemples variés, des problématiques que soulève le phénomène polymorphe d institutionnalisation de la société internationale. La première partie est consacrée au phénomène des « organisations internationales », sous l angle à la fois de l institutionnalisation progressive des relations internationales et de la difficulté à cerner une catégorie unifiée. La deuxième partie rend compte de la création, de la disparition et des mutations des organisations internationales, ici envisagées comme systèmes institutionnels et ordres juridiques dérivés. La troisième partie analyse l autonomie que l acquisition de la personnalité juridique et de privilèges et immunités, un organe administratif intégré, un personnel ou un budget propres confèrent aux organi...

  7. Contribution of the low cycle fatigue on ultra high purity Ni-Cr-Fe alloys and on Ni monocrystals to the understanding of the hydrogen role in stress corrosion cracking for the alloys 600 and 690; Apport de la fatigue oligocyclique sur alliages Ni-Cr-Fe d'ultra haute purete et sur monocristaux de Ni a la comprehension sous contrainte des alliages 600 et 69O

    Energy Technology Data Exchange (ETDEWEB)

    Renaudot, N

    1999-06-01

    We discuss the role of hydrogen in cracking of Ni base alloys used for pressurised water reactor (PWR) primary tubes (alloy 600 and 690). Cracking can be explained by a Stress Corrosion Cracking (SCC) phenomenon. For this purpose, Low cycle fatigue (R = - 1) under cathodic charging at room temperature is conducted to study hydrogen effects on propagation of cracks mechanically initiated by the formation of Persistent Slip Bands (PSB). Low cycle fatigue on Ultra High Purity specimens (Ni, alloy 600 and 690) reveals the very important hydrogen effect on crack propagation rate, whatever the Cr content in the Ni base alloy. If Cr seems to have an effect over-hydrogen penetration in specimens (by a protective film formation), it have no beneficial effect when hydrogen have diffused ahead of a crack tip. Propagation rates (transgranular or intergranular) are highly increased, no matter of the absence of impurities like sulphur. Then, in PWR, the difference in the behaviour of alloy 600 and 690 could be due to a slower microcrack propagation rate for alloy 690. Protective films could play an important role in this difference, which is to study. Low cycle fatigue on Ni single crystals oriented for single slip shows, for the first time on bulk specimen, a macroscopic softening which can be explained. by hydrogen-dislocation interactions. Moreover, a simple quantitative model based on these interactions results in the same softening as the one observed experimentally. These results allow to validate experimentally one of the most important steps in the 'Corrosion Enhanced Plasticity (CEP) model', i.e. the softening ahead of a stress corrosion crack tip by hydrogen dislocation interactions. This is of importance because this model can explain cracking in numerous FCC materials-environment couple. (author)

  8. Santé des adolescents et des jeunes au Burkina Faso : état des ...

    African Journals Online (AJOL)

    Il s'est agi d'une étude évaluative ayant utilisé une revue documentaire associée à une interview des acteurs clés et un atelier de validation et d'identification des interventions pertinentes pour un plan stratégique national. La situation de la santé des adolescents et des jeunes est caractérisée par des grossesses précoces ...

  9. Fatigue Experiences Among OCD Outpatients.

    Science.gov (United States)

    Pasquini, Massimo; Piacentino, Daria; Berardelli, Isabella; Roselli, Valentina; Maraone, Annalisa; Tarsitani, Lorenzo; Biondi, Massimo

    2015-12-01

    Patients with OCD are impaired in multiple domains of functioning and quality of life. While associated psychopathology complaints and neuropsychological deficits were reported, the subjective experience of general fatigue and mental fatigue was scarcely investigated. In this single-center case-control study we compared 50 non-depressed OCD outpatients consecutively recruited and 50 panic disorder (PD) outpatients, to determine whether they experienced fatigue differently. Assessment consisted of structured clinical interview for DSM-IV criteria by using the SCID-I and the SCID-II. Symptom severity was assessed using the Yale-Brown Obsessive-Compulsive Scale, the Hamilton Anxiety Rating Scale, the Hamilton Depression Rating Scale, the Clinical Global Impressions Scale, severity and the Global Assessment of Functioning Scale. Fatigue was assessed by using the Multidimensional Fatigue Inventory (MFI). Regarding MFI physical fatigue, an OR of 0.196 (95 % CI 0.080-0.478) was found, suggesting that its presence is associated with lower odds of OCD compared to PD. The same can be said for MFI mental fatigue, as an OR of 0.138 (95 % CI 0.049-0.326) was found, suggesting that its presence is associated with lower odds of OCD. Notably, OCD patients with OCDP co-morbidity reported higher scores of mental fatigue. In this study fatigue, including mental fatigue, seems not to be a prominent experience among adult non-depressed OCD patients.

  10. Caffeine, fatigue, and cognition.

    Science.gov (United States)

    Lorist, Monicque M; Tops, Mattie

    2003-10-01

    Effects of caffeine and fatigue are discussed with special attention to adenosine-dopamine interactions. Effects of caffeine on human cognition are diverse. Behavioural measurements indicate a general improvement in the efficiency of information processing after caffeine, while the EEG data support the general belief that caffeine acts as a stimulant. Studies using ERP measures indicate that caffeine has an effect on attention, which is independent of specific stimulus characteristics. Behavioural effects on response related processes turned out to be mainly related to more peripheral motor processes. Recent insights in adenosine and dopamine physiology and functionality and their relationships with fatigue point to a possible modulation by caffeine of mechanisms involved in the regulation of behavioural energy expenditure.

  11. Fatigue 󈨛. Volume 1,

    Science.gov (United States)

    1987-06-01

    277 FATIGUE 87 da/dn (m/ ciclo ) 10 - 07 10 - 08 10 - 0 9 R=0.5 S* • -Long Crack 10-10 e Smax = 195 MPa *Smax = 205 MPa 1Smax = 225 MPa 0.5 1 5 10 AK...MPa/m) Figure 1 Crack growth rate vs stress intensity factor range 10 . da/dn (m/ ciclo ) i0 - ° 09 i0-o -Long crack 10 . ° Smax = 10 Pa 10 Smax...120 NPa Smax = 145 NlPa 0.5 I 10 AKN~~)50 Figure 2 Crack growth rate vs stress intensity factor range 278 FATIGUE 87 da/dn (m/ ciclo ) 10- 10- 0 7 % 10

  12. Dental Encounter System (DES)

    Data.gov (United States)

    Department of Veterans Affairs — Dental Encounter System (DES) is an automated health care application designed to capture critical data about the operations of VA Dental Services. Information on...

  13. Diethylstilbestrol (DES) and Cancer

    Science.gov (United States)

    ... DES-exposed grandchildren have? Researchers are also studying possible health effects among women and men who are the children ... for unexposed men. In addition, researchers are studying possible health effects on the grandchildren of mothers who were exposed ...

  14. Table des illustrations

    OpenAIRE

    2016-01-01

    Tableaux Dates d’inauguration des grands hôtels japonais entre 1860 et 1945… 19 Histoire, tourisme et hôtellerie en Corée depuis les années 1870… 59-60 Dates d’inauguration des grands hôtels chinois depuis 1863… 84 Les hôtels de luxe et leurs capacités d’hébergement en Corée en 2000… 103 Les flux de personnes suscités par les hôtels « super luxe » de Séoul en 2000… 105 L’activité des grands hôtels à Séoul en 1999 (en wons)… 106 Propriété et gestion des grands hôtels à Séoul en 1999…. 110 La c...

  15. Direction des Publications

    African Journals Online (AJOL)

    Synthese

    potential and surface properties of their mixtures were investigated, in an ... suppose that the electrostatic repulsive interactions between the two anion ... concentration, et de la conformation des ..... proteins and polysaccharides in solutions,.

  16. Recovery from Fatigue

    Science.gov (United States)

    1973-06-30

    functioning to replace sleep or recover from fatigue. Possibly the hypnagogic period of descending Stage I, apparently perceived differently S-1 of...partly to quality of mentation during the Stage I hypnagogic period. It may well be that nappers belong to the group described by Foulkes, Spear, and...Symonds (1966) who engage in hypnagogic mentation, and this is clearly perceived by them as different from sleep. The present study suggests that napping

  17. La revolution des savants

    CERN Document Server

    Chavanne, A

    1989-01-01

    Premiere cassette : - 1666 : impact de la creation de l'Academie des Sciences par Colbert, trente ans apres le proces de Galile, et au moment des disparitions de Pascal, Descartes et Fermat. Elle dirigee par le hollandais Huyggens jusqu'a sa fuite de France au moment de la revocation de l'Edit de Nantes. - 1750 : l'Encyclopedie (ou "Dictionnaire raisonne des Sciences, des Arts et des Metiers") de Diderot et d'Alembert, soutenus par Malherbes, Buffon, Condorcet et Rousseau. - 1789 : Revolution francaise. - 8 aout 1793 : l'Assemblee, par une declaration de Marat, dissout l'Academie des Sciences. Celle-ci continue cependant ses travaux pour les poids et mesures jusqu'en 1795. - la Terreur : la condamnation a mort, pas au nom d'une "Revolution qui n'a pas besoin de savants" mais pour d'autres raisons, de trois grands hommes de science : Lavoisier, Bailly et Condorcet. - 1793-1794 : Au printemps 93, le Comite de Salut Publique s'inquiete du demi-million de soldats etrangers de toutes les pays frontaliers qui essai...

  18. Probabilistic Fatigue Damage Program (FATIG)

    Science.gov (United States)

    Michalopoulos, Constantine

    2012-01-01

    FATIG computes fatigue damage/fatigue life using the stress rms (root mean square) value, the total number of cycles, and S-N curve parameters. The damage is computed by the following methods: (a) traditional method using Miner s rule with stress cycles determined from a Rayleigh distribution up to 3*sigma; and (b) classical fatigue damage formula involving the Gamma function, which is derived from the integral version of Miner's rule. The integration is carried out over all stress amplitudes. This software solves the problem of probabilistic fatigue damage using the integral form of the Palmgren-Miner rule. The software computes fatigue life using an approach involving all stress amplitudes, up to N*sigma, as specified by the user. It can be used in the design of structural components subjected to random dynamic loading, or by any stress analyst with minimal training for fatigue life estimates of structural components.

  19. Descriptive study of burnout, compassion fatigue and compassion satisfaction in undergraduate nursing students at a tertiary education institution in KwaZulu-Natal

    OpenAIRE

    Christina T. Mathias; Dorien L. Wentzel

    2017-01-01

    Background: Studies have investigated burnout and compassion fatigue among nurses and effects in the nursing profession. However, there are limited investigations of burnout and compassion fatigue among undergraduate nursing students in South Africa, as nursing students may experience distressful situations during their nursing education course, which may have an impact during their training and in their profession as they graduate. Purpose: The purpose of this descriptive study was to des...

  20. Contribution des radios communautaires a l'education des ...

    African Journals Online (AJOL)

    Contribution des radios communautaires a l'education des populations rurales pour un developpement durable au Benin: etude de cas. ... Journal de la Recherche Scientifique de l'Université de Lomé. Journal Home · ABOUT THIS JOURNAL ...

  1. La convergence des rôles respectifs des relationnistes et des journalistes influence-t-elle la perception qu'ils ont les uns des autres?

    DEFF Research Database (Denmark)

    Valentini, Chiara

    2017-01-01

    la convergence des rôles respectifs des praticiens des relations publiques et des journalistes a un effet favorable sur la perception qu’ils ont les uns des autres. L’effet est plus marqué chez les praticiens des relations publiques, car leur vision de la profession en journalisme correspond à celle...

  2. Promouvoir l'entrepreneuriat inclusif des jeunes et des femmes ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Le projet vise à analyser la contribution réelle et potentielle de l'entrepreneuriat inclusif au bien-être des jeunes et des femmes en Côte d'Ivoire, au Burkina Faso et au Kenya. Après un état des lieux de la pratique de l'entrepreneuriat inclusif dans chacun des pays ciblés, l'équipe de recherche étudiera son incidence sur ...

  3. Investigation of the glide modes of single crystals of beryllium; Etude des modes de glissement de monocristaux de beryllium

    Energy Technology Data Exchange (ETDEWEB)

    Regnier, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1969-05-01

    glissement et des configurations de dislocations. L'etude du glissement prismatique a ete developpee beaucoup plus largement: l'influence de la temperature de la vitesse de deformation, de l'orientation initiale du plan de base et des plans prismatiques ont ete releves sur des echantillons d'orientation soignee, deformes en tension. On a egalement effectue quelques essais de microdeformation et observe de facon detaillee les lignes de glissement et les configurations de dislocations. Le comportement tres particulier observe n'est pas du aux impuretes, mais au glissement devie. On propose un mecanisme de blocage des dislocations permettant de l'expliquer. Comme ce mecanisme suppose que les dislocations a-bar peuvent aussi se dissocier sur les plans prismatiques [101-bar0] on examine cette possibilite et l'on propose plusieurs dissociations eventuelles dont la plus probable correspond a la transformation de phase hexagonale compacte {yields} cubique centree. En generalisant cette hypothese, on montre alors comment on peut rendre compte de la facilite relative des divers modes de glissement dans tous les metaux hexagonaux. (auteur)

  4. Translating Fatigue to Human Performance

    Science.gov (United States)

    Enoka, Roger M.; Duchateau, Jacques

    2016-01-01

    Despite flourishing interest in the topic of fatigue—as indicated by the many presentations on fatigue at the 2015 annual meeting of the American College of Sports Medicine—surprisingly little is known about its impact on human performance. There are two main reasons for this dilemma: (1) the inability of current terminology to accommodate the scope of the conditions ascribed to fatigue, and (2) a paucity of validated experimental models. In contrast to current practice, a case is made for a unified definition of fatigue to facilitate its management in health and disease. Based on the classic two-domain concept of Mosso, fatigue is defined as a disabling symptom in which physical and cognitive function is limited by interactions between performance fatigability and perceived fatigability. As a symptom, fatigue can only be measured by self-report, quantified as either a trait characteristic or a state variable. One consequence of such a definition is that the word fatigue should not be preceded by an adjective (e.g., central, mental, muscle, peripheral, and supraspinal) to suggest the locus of the changes responsible for an observed level of fatigue. Rather, mechanistic studies should be performed with validated experimental models to identify the changes responsible for the reported fatigue. As indicated by three examples (walking endurance in old adults, time trials by endurance athletes, and fatigue in persons with multiple sclerosis) discussed in the review, however, it has proven challenging to develop valid experimental models of fatigue. The proposed framework provides a foundation to address the many gaps in knowledge of how laboratory measures of fatigue and fatigability impact real-world performance. PMID:27015386

  5. La fabrique des sciences des institutions aux pratiques

    CERN Document Server

    Benninghoff, Martin; Crettaz von Roten, Fabienne; Merz, Martina

    2006-01-01

    Aujourd'hui, les façons de produire, d'organiser, d'évaluer et d'utiliser les savoirs sont en profond débat. De plus en plus, l'Etat, la société civile et l'économie tentent d'influencer les activités des universités et des laboratoires de recherche. Ces développements mettent à l'épreuve tout à la fois les fondements des systèmes d'enseignement supérieur et de recherche, l'autonomie des institutions scientifiques, la définition des frontières des savoirs et l'acceptation des sciences. Dans des contextes suisses et européens, cet ouvrage s'intéresse aux manières dont les sciences et les technologies sont fabriquées, en analysant leurs institutions et les pratiques. A partir d'une approche relationnelle, les sciences et les technologies sont conçues comme des phénomènes profondément sociaux, culturels et politiques. Une telle démarche déstabilise les visions parfois idéalisées et stéréotypées de la construction des savoirs. Des études de cas détaillées décrivent des phénomè...

  6. Effets des extraits vegetaux sur la dynamique de populations des ...

    African Journals Online (AJOL)

    La présente étude se propose de trouver une alternative de l'utilisation des pesticides chimiques en testant l'effet insecticide des extraits aqueux des feuilles de Hyptis suaveolens, graines de Ricinus communis et de Azadirachta indica contre les ravageurs du niébé en conditions de champ en utilisant le cyperméthrine ...

  7. Method of chemical analysis of silicate rocks (1962); Methode d'analyse chimique des roches silicatees (1962)

    Energy Technology Data Exchange (ETDEWEB)

    Pouget, R [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1962-07-01

    A rapid method of analysis for the physical and chemical determination of the major constituents of silicate rocks is described. Water losses at 100 deg. C and losses of volatile elements at 1000 deg. C are estimated after staying in oven for these temperatures, or by mean of a thermo-balance. The determination of silica is made by a double insolubilization with hydrochloric acid on attack solution with sodium carbonate; total iron and aluminium, both with calcium and magnesium, after ammoniacal precipitation of Fe and Al, are determined on the filtration product of silica by titrimetry-photometry of their complexes with EDTA. The alkalis Na and K by flame spectrophotometry, Mn by colorimetry of the permanganate, and Ti by mean of his complex with H{sub 2}O{sub 2}, are determined on fluosulfuric attack solution. Phosphorus is determined by his complex with 'molybdenum blue' on a fluoro-nitro-boric attack solution; iron is estimated by potentiometry, with the help of bichromate on hydrofluoric solution. (author) [French] Une methode d'analyse rapide est decrite pour la determination physico-chimique des constituants principaux des roches silicatees. Les pertes en eau a 100 deg. C et en matieres volatiles a 1000 deg. C sont evaluees apres passage au four a ces temperatures, ou a l'aide d'une thermobalance. La determination de la silice se fait par double insolubilisation a l'acide chlorhydrique, sur une attaque au carbonate de sodium; le fer total et l'aluminium ainsi que le calcium et le magnesium, apres precipitation a l'ammoniaque des deux premiers metaux, sont determines sur le filtrat de la silice par titrimetrie-photometrie de leurs complexes avec l'E.D.T.A. Les alcalins sodium et potassium par spectrophotometrie de flamme, le manganese par colorimetrie du permanganate, le titane a l'aide de son complexe avec l'eau oxygenee, sont determines sur une attaque fluosulfurique. Le phosphore est determine par son complexe du 'bleu de molybdene' sur une attaque fluo

  8. Fatigue and fracture: Overview

    Science.gov (United States)

    Halford, G. R.

    1984-01-01

    A brief overview of the status of the fatigue and fracture programs is given. The programs involve the development of appropriate analytic material behavior models for cyclic stress-strain-temperature-time/cyclic crack initiation, and cyclic crack propagation. The underlying thrust of these programs is the development and verification of workable engineering methods for the calculation, in advance of service, of the local cyclic stress-strain response at the critical life governing location in hot section compounds, and the resultant crack initiation and crack growth lifetimes.

  9. Multidimensional fatigue and its correlates in hospitalised advanced cancer patients.

    NARCIS (Netherlands)

    Echteld, M.A.; Passchier, J.; Teunissen, S.; Claessen, S.; Wit, R. de; Rijt, C.C.D. van der

    2007-01-01

    Although fatigue is a multidimensional concept, multidimensional fatigue is rarely investigated in hospitalised cancer patients. We determined the levels and correlates of multidimensional fatigue in 100 advanced cancer patients admitted for symptom control. Fatigue dimensions were general fatigue

  10. Fatigue of Concrete Armour Units

    DEFF Research Database (Denmark)

    Sørensen, N. B.; Burcharth, H. F.; Liu, Z.

    1995-01-01

    In the present article fatigue as a possible reason for failure of Dolosse armour units made of plain concrete is discussed.......In the present article fatigue as a possible reason for failure of Dolosse armour units made of plain concrete is discussed....

  11. Fatigue test on aluminium bridges

    NARCIS (Netherlands)

    Maljaars, J.; Soetens, F.; Straalen, van IJ.J.

    2005-01-01

    Traffic bridges are subjected to variable loads and should therefore be checked on fatigue. Especially low weight materials, like aluminium, are sensitive to fatigue, because the variable load is a substantial part of the total load. This paper shows the structural design of an aluminium bridge

  12. Charte du Conseil des Gouverneurs

    International Development Research Centre (IDRC) Digital Library (Canada)

    Office 2004 Test Drive User

    7. favoriser des communications ouvertes et franches entre le personnel, la direction ..... de dresser le procès-verbal des réunions du Conseil et de ses comités et de veiller à ce ... et des résultats qu'il obtient, et non de sa gestion quotidienne.

  13. Areva fatigue concept. Fast fatigue evaluation, a new method for fatigue analysis

    International Nuclear Information System (INIS)

    Heinz, Benedikt; Bergholz, Steffen; Rudolph, Juergen

    2011-01-01

    Within the discussions on the long term operation (LTO) of nuclear power plants the ageing management is on the focus of that analysis. The knowledge of the operational thermal cyclic load data on components of the power plants and their evaluation in the fatigue analysis is a central concern. The changes in fatigue requirements (e.g. the consideration of environmentally assisted fatigue - EAF) recently discussed and LTO efforts are a strong motivation for the identification of margins in the existing fatigue analysis approaches. These margins should be considered within new approaches in order to obtain realistic (or more accurate) analysis results. Of course, these new analysis approaches have to be manageable and efficient. The Areva Fatigue Concept (AFC) offers the comprehensive conceptual basis for the consideration of fatigue on different levels and depths. The combination of data logging and automated fatigue evaluation are important modules of the AFC. Besides the established simplified stress based fatigue estimation Areva develops a further automated fatigue analysis method called Fast Fatigue Evaluation (FFE). This method comprises highly automated stress analyses at the fatigue relevant locations of the component. Hence, a component specific course of stress as a function of time is determined based on FAMOS or similar temperature measurement systems. The subsequent application of the rain flow cycle counting algorithm allows for the determination of the usage factor following the rules of the design code requirements. The new FFE approach constitutes a cycle counting method based on the real stresses in the component, and determined as result a rule-conformity cumulative usage factor. (orig.)

  14. Research on driver fatigue detection

    Science.gov (United States)

    Zhang, Ting; Chen, Zhong; Ouyang, Chao

    2018-03-01

    Driver fatigue is one of the main causes of frequent traffic accidents. In this case, driver fatigue detection system has very important significance in avoiding traffic accidents. This paper presents a real-time method based on fusion of multiple facial features, including eye closure, yawn and head movement. The eye state is classified as being open or closed by a linear SVM classifier trained using HOG features of the detected eye. The mouth state is determined according to the width-height ratio of the mouth. The head movement is detected by head pitch angle calculated by facial landmark. The driver's fatigue state can be reasoned by the model trained by above features. According to experimental results, drive fatigue detection obtains an excellent performance. It indicates that the developed method is valuable for the application of avoiding traffic accidents caused by driver's fatigue.

  15. Roughness Effects on Fretting Fatigue

    Science.gov (United States)

    Yue, Tongyan; Abdel Wahab, Magd

    2017-05-01

    Fretting is a small oscillatory relative motion between two normal loaded contact surfaces. It may cause fretting fatigue, fretting wear and/or fretting corrosion damage depending on various fretting couples and working conditions. Fretting fatigue usually occurs at partial slip condition, and results in catastrophic failure at the stress levels below the fatigue limit of the material. Many parameters may affect fretting behaviour, including the applied normal load and displacement, material properties, roughness of the contact surfaces, frequency, etc. Since fretting damage is undesirable due to contacting, the effect of rough contact surfaces on fretting damage has been studied by many researchers. Experimental method on this topic is usually focusing on rough surface effects by finishing treatment and random rough surface effects in order to increase fretting fatigue life. However, most of numerical models on roughness are based on random surface. This paper reviewed both experimental and numerical methodology on the rough surface effects on fretting fatigue.

  16. Le statut vitaminique des individus et des populations…

    Directory of Open Access Journals (Sweden)

    Icart Jean-Claude

    2000-05-01

    Full Text Available Comme le souligne un récent rapport du Haut comité de santé publique, le statut vitaminique des individus et des populations demeure une question d’actualité. Si les études ne révèlent plus de signes évocateurs de carence, au plus des problèmes de déficiences pour certains groupes à risque, des interrogations, demeurent malgré le contexte d’abondance, concernant la couverture des besoins, laquelle pourrait s’avérer inférieure aux valeurs considérées comme satisfaisantes.

  17. Les lueurs des sables

    CERN Multimedia

    Les lueurs des sables

    2013-01-01

    Two CERN ladies are getting ready for the “Trophée Roses des Sables” rally adventure: Julie and Laetitia are finalizing the last details before setting off on Monday 7th October 2013. Julie from EN-MEF group and Laetitia from DGS-SEE group, met at the CERN Rugby club. This year, they are participating in the 100 % female rally which will take place in Morocco from 10 to 20 October. They will be carrying along 100 kg of humanitarian donation for children such as some clothes, books and medical material. Do not hesitate to show your support at their farewell party to be held on Monday 7 October, from 4 to 6 pm in front of the St Genis-Pouilly Mairie (city Hall). Follow their exciting adventure on the blog leslueursdessables.trophee-roses-des-sables.org and on their association’s Facebook page Les Lueurs des Sables.

  18. Liste des auteurs

    OpenAIRE

    2016-01-01

    Madeleine Akrich      Ecole des Mines – Centre de Sociologie de l’innovation – Paris Noël Barbe      Association comtoise des Arts et Traditions populaires – Besançon Lucien Bernot      Ecole des hautes études en sciences sociales (EHESS) – Paris Anni Borzeix      Centre national de la recherche scientifique (CNRS) –     Groupement d’intérêt public (GIP) « Mutations industrielles » – Paris François Boudarias      Laboratoire d’Anthropologie et de sociologie de Tours (LAST) Dominique Boullier ...

  19. Simplified elastoplastic fatigue analysis

    International Nuclear Information System (INIS)

    Autrusson, B.; Acker, D.; Hoffmann, A.

    1987-01-01

    Oligocyclic fatigue behaviour is a function of the local strain range. The design codes ASME section III, RCC-M, Code Case N47, RCC-MR, and the Guide issued by PNC propose simplified methods to evaluate the local strain range. After having briefly described these simplified methods, we tested them by comparing the results of experimental strains with those predicted by these rules. The experiments conducted for this study involved perforated plates under tensile stress, notched or reinforced beams under four-point bending stress, grooved specimens under tensile-compressive stress, and embedded grooved beams under bending stress. They display a relative conservatism depending on each case. The evaluation of the strains of rather inaccurate and sometimes lacks conservatism. So far, the proposal is to use the finite element codes with a simple model. The isotropic model with the cyclic consolidation curve offers a good representation of the real equivalent strain. There is obviously no question of representing the cycles and the entire loading history, but merely of calculating the maximum variation in elastoplastic equivalent deformations with a constant-rate loading. The results presented testify to the good prediction of the strains with this model. The maximum equivalent strain will be employed to evaluate fatigue damage

  20. Understanding postoperative fatigue.

    Science.gov (United States)

    Rose, E A; King, T C

    1978-07-01

    Performance characteristics of the central nervous, cardiovascular, respiratory and muscular systems in man postoperatively have received little investigative attention, despite the well known syndrome of postoperative fatigue. The impairmen in perception and psychomotor skills that has been shown to result from caloric restriction, bedrest, sedation and sleep deprivation suggests that a similar deficit may occur after surgical procedures. After a simple elective surgical procedure, maximal oxygen uptake decreases and the adaptability of heart rate to submaximal workloads is impaired. Similar deleterious effects on cardiorespiratory performance have been documented with starvation and bedrest; an understanding of cardiorespiratory performance postoperatively awaits further investigation. Maximal muscular force of contraction is also impaired by caloric restriction and bedrest, suggesting that similar effects may be seen in the postoperative state, although this has not been studied. A better understanding of the syndrome of postoperative fatigue could be achieved by a descriptive analysis of physiologic performance postoperatively. Such descriptive data could form the basis for objective evaluation of therapeutic measures intended to improve performance, such as nutritional supplementation and pharmacologic intervention. The observation that exercise with the patient in the supine position may decrease the impairment in maximal aerobic power otherwise expected in immobilized patients suggests that controlled exercise therapy may be of value in reducing physiologic impairment postoperatively.

  1. Diaphragmatic fatigue in man.

    Science.gov (United States)

    Roussos, C S; Macklem, P T

    1977-08-01

    The time required (tlim) to produce fatigue of the diaphragm was determined in three normal seated subjects, breathing through a variety of high alinear, inspiratory resistances. During each breath in all experimental runs the subject generated a transdiaphragmatic pressure (Pdi) which was a predetermined fraction of his maximum inspiratory Pdi (Pdimax) at functional residual capacity. The breathing test was performed until the subject was unable to generate this Pdi. The relationship between Pdi/Pdimax and tlim was curvilinear so that when Pdi/Pdimax was small tlim increased markedly for little changes in Pdi/Pdimax. The value of Pdi/Pdimax that could be generated indefinitely (Pdicrit) was around 0.4. Hypoxia appeared to have no influence on Pdicrit, but probably led to a reduction in tlim at Pdi greater than Pdicrit for equal rates of energy consumption. Insofar as the behavior of the diaphragm reflects that of other respiratory muscles it appears that quite high inspiratory loads can be tolerated indefinitely. However, when the energy consumption of the respiratory muscles exceeds a critical level, fatigue should develop. This may be a mechanism of respiratory failure in a variety in a variety of lung diseases.

  2. Évaluation des pratiques agricoles des légumes feuilles : le cas des ...

    African Journals Online (AJOL)

    Face à ce constat, le défi de la recherche serait la détermination du niveau actuel de contamination des légumes feuilles et des eaux du barrage et celui de l'État serait l'initiation de programmes de sensibilisation des producteurs par rapport à une gestion plus rigoureuse des pesticides. Mots-clés : pratiques paysannes, ...

  3. Reduced Electromyographic Fatigue Threshold after Performing a Cognitive Fatiguing Task.

    Science.gov (United States)

    Ferris, Justine R; Tomlinson, Mary A; Ward, Tayler N; Pepin, Marie E; Malek, Moh H

    2018-02-22

    Cognitive fatigue tasks performed prior to exercise may reduce exercise capacity. The electromyographic fatigue threshold (EMGFT) is the highest exercise intensity that can be maintained without significant increase in the EMG amplitude versus time relationship. To date, no studies have examined the effect of cognitive fatigue on the estimation of the EMGFT. The purpose of this study, therefore, was to determine whether or not cognitive fatigue prior to performing exercise reduces the estimated EMGFT. Eight healthy college-aged men were recruited from a university student population and visited the laboratory on multiple occasions. In a randomized order, subjects performed either the cognitive fatigue task (AX Continuous Performance Test; AX-CPT) for 60 min on one visit (experimental condition) or watched a video on trains for 60 min on the other visit (control condition). After each condition, subjects performed the incremental single-leg knee-extensor ergometry test while the EMG amplitude was recorded from the rectus femoris muscle and heart rate was monitored throughout. Thereafter, the EMGFT was calculated for each participant for each visit and compared using paired samples t-test. For exercise outcomes, there were no significant mean differences for maximal power output between the two conditions (control: 51 ± 5 vs. fatigue: 50 ± 3 W), but a significant decrease in EMGFT between the two conditions (control: 31 ± 3 vs. fatigue: 24 ± 2 W; p = 0.013). Moreover, maximal heart rate was significantly different between the two conditions (control: 151 ± 5 vs. fatigue: 132 ± 6; p = 0.027). These results suggest that performing the cognitive fatiguing task reduces the EMGFT with a corresponding reduction in maximal heart rate response.

  4. Application des TIC à l'atténuation des effets des catastrophes dans ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    L'Amérique centrale est souvent aux prises avec des inondations et des ... (SIG) et de traitement des images, afin de cartographier les dangers et de modéliser les ... de l'Institut d'étude du développement international de l'Université McGill.

  5. Fatigue testing of wood composites for aerogenerator blades. Pt. 11: Assessment of fatigue damage accumulation using a fatigue modulus approach

    Energy Technology Data Exchange (ETDEWEB)

    Hacker, C L; Ansell, M P [Bath Univ. (United Kingdom)

    1996-12-31

    Stress-strain hysteresis loops have been captured during fatigue tests performed at R=10 (compression-compression) and R=0.1 (tension-tension) on Khaya epoxy wood composites. A fatigue modulus approach, proposed by Hwang and Han in 1989, has been applied to the data and a relationship established between the initial change in fatigue modulus and fatigue life. By following changes in fatigue modulus during the first 100 test cycles it is possible to predict the life of the sample allowing rapid evaluation of the fatigue performance of wood composites. Fatigue modulus values have also been calculated for hysteresis loops captured during complex load - time history tests. Similar trends in change in fatigue modulus suggest that this approach could be used in complex loading conditions to evaluate fatigue damage accumulation and predict fatigue life. (Author)

  6. Fatigue: Is it all neurochemistry?

    Science.gov (United States)

    Meeusen, Romain; Roelands, Bart

    2018-02-01

    Fatigue during exercise can be approached from different angles. Peripheral fatigue is usually described as an impairment located in the muscle and characterized by a metabolic end point, while central fatigue is defined as a failure of the central nervous system to adequately drive the muscle. The aim of the present narrative review paper is to look at the mechanisms involved in the occurrence of fatigue during prolonged exercise, predominantly from a brain neurochemical point of view. From studies in rodents it is clear that exercise increases the release of several neurotransmitters in different brain regions, and that the onset of fatigue can be manipulated when dopaminergic influx in the preoptic and anterior hypothalamus is increased, interfering with thermoregulation. This is however not as straightforward in humans, in which most studies manipulating brain neurotransmission failed to change the onset of fatigue in normal ambient temperatures. When the ambient temperature was increased, dopaminergic and combined dopaminergic and noradrenergic reuptake inhibition appeared to override a safety switch, allowing subjects to push harder and become much warmer, without changing their perception. In general, we can conclude that brain neurochemistry is clearly involved in the complex regulation of fatigue, but many other mediators also play a role.

  7. Mental Fatigue Affects Visual Selective Attention

    NARCIS (Netherlands)

    Faber, Leon G.; Maurits, Natasha M.; Lorist, Monicque M.

    2012-01-01

    Mental fatigue is a form of fatigue, induced by continuous task performance. Mentally fatigued people often report having a hard time keeping their attention focussed and being easily distracted. In this study, we examined the relation between mental fatigue, as induced by time on task, and

  8. REPRISE DES COURS - Yoga

    CERN Multimedia

    Club de Yoga

    2015-01-01

    REPRISE DES COURS – Venez nombreux ! Yoga, Sophrologie, Tai Chi La liste des cours pour le semestre allant du 1er septembre 2015 au 31 janvier 2016 est disponible sur notre site web : http://club-yoga.web.cern.ch Lieu Les cours ont lieu dans la salle des clubs, à l’entresol du restaurant No 2, Bât. 504 (dans la salle no 3 pour la Sophrologie). Prix des cours Le prix pour le semestre (environ 18 leçons) est fixé à 220 CHF plus 10 CHF d’adhésion annuelle au Club. Couple : 200 CHF par personne. 2 cours par semaine : 400 CHF. Inscriptions Les inscriptions aux cours seront prises directement auprès du professeur, lors de la 1ère séance. Avant de s’inscrire pour le semestre, il est possible d’essayer une séance gratuitement. Informations : http://club-yoga.web.cern.ch ----------------------------------------- cern.ch/club-yoga/

  9. Praxis des Klebens

    CERN Document Server

    Theuerkauff, Petra

    1989-01-01

    Bei diesem Buch handelt es sich um einen Leitfaden fur Klebepraktiker. Es werden die verschiedenen Einzelschritte beim kleben beschrieben, als auch die vorbereitenden Massnahmen und anschliessenden Prufverfahren auf Festigkeit behandelt. Das Buch sollte an keinem Arbeitsplatz fehlen, wo man sich mit Problemen der Fugetechnik des Klebens beschaftigt.

  10. Dimensions des stabulations 2018

    OpenAIRE

    Früh, Barbara; Maurer, Veronika; Schneider, Claudia; Schürmann, Stefan; Spengler Neff, Anet; Werne, Steffen

    2018-01-01

    Les «Dimensions des stabulations» contiennent toutes les dimensions pour les stabulations et les parcours pour la production animale en agriculture biologique. Cette liste sert d’instrument de planification pour les éleveurs, d’outil de travail pour la vulgarisation et d’ouvrage de référence pour le contrôle bio.

  11. Direction des Publications

    African Journals Online (AJOL)

    Synthese

    économique des services rendus par les écosystèmes marins. La richesse ... croissance plus rapide que la moyenne de l‟économie ...... services and natural capital. Nature. 387, 253-260. .... d‟interactions où l‟humain est partie prenante. In.

  12. La physique des infinis

    CERN Document Server

    Bernardeau, Francis; Laplace, Sandrine; Spiro, Michel

    2013-01-01

    Écrire l'histoire de l'Univers, tel est l'objectif commun des physiciens des particules et des astrophysiciens. Pour y parvenir, deux approches s'épaulent : la voie de l'infiniment petit, que l'on emprunte via de gigantesques accélérateurs de particules, et celle de l'infiniment grand, dont le laboratoire est l'Univers. Un Univers qui est bien loin d'avoir livré tous ses secrets. On connaît à peine 4,8 % de la matière qui le constitue, le reste étant composé de matière noire (25,8 %) et d'énergie noire (69,4 %), toutes deux de nature inconnue. Et si la récente découverte du boson de Higgs valide le Modèle standard de la physique des particules, celui-ci est toujours incomplet et doit être étendu à ou dépassé. Est-on arrivé au bout du jeu de poupées russes de la matière ? Quelles sont les particules manquantes ? Faut-il revoir les lois fondamentales ? Quels instruments faut-il mettre en œuvre pour accéder à cette « nouvelle physique » ? Comment parler de Super Big Science aux citoye...

  13. Injectabilite des coulis de ciment dans des milieux fissures

    Science.gov (United States)

    Mnif, Thameur

    Le travail presente ici est un bilan du travaux de recherche effectues sur l'injectabilite des coulis de ciment dans lu milieux fissures. Un certain nombre de coulis a base de ciment Portland et microfin ont ete selectionnes afin de caracteriser leur capacite a penetrer des milieux fissures. Une partie des essais a ete menee en laboratoire. L'etude rheologique des differents melanges a permis de tester l'influence de l'ajout de superplastifiant et/ou de fumee de silice sur la distribution granulometrique des coulis et par consequent sur leur capacite a injecter des colonnes de sable simulant un milieu fissure donne. La classe granulometrique d'un coulis, sa stabilite et sa fluidite sont apparus comme les trois facteurs principaux pour la reussite d'une injection. Un facteur de finesse a ete defini au cours de cette etude: base sur la classe granulometrique du ciment et sa stabilite, il peut entrer dans la formulation theorique du debit d'injection avant application sur chantier. La deuxieme et derniere partie de l'etude presente les resultats de deux projets de recherche sur l'injection realises sur chantier. L'injection de dalles de beton fissurees a permis le suivi de l'evolution des pressions avec la distance au point d'injection. L'injection de murs de maconnerie a caractere historique a montre l'importance de la definition de criteres de performance des coulis a utiliser pour traiter un milieu donne et pour un objectif donne. Plusieurs melanges peuvent ainsi etre predefinis et mis a disposition sur le chantier. La complementarite des ciments traditionnels et des ciments microfins devient alors un atout important. Le choix d'utilisation de ces melanges est fonction du terrain rencontre. En conclusion, cette recherche etablit une methodologie pour la selection des coulis a base de ciment et des pressions d'injection en fonction de l'ouverture des fissures ou joints de construction.

  14. Screening phytochimique et identification spectroscopique des ...

    African Journals Online (AJOL)

    Origin

    plante, effectuée pour la première fois, a révélé la présence des alcaloïdes, des flavonoïdes, des tanins catéchiques, des terpènes, des coumarines et des composés cyanogénétiques. Quant aux saponines et les quinones libres, ils sont présents chez les fleurs et absents chez les feuilles. La caractérisation des molécules.

  15. SI:FatiguePro 4 Advanced Approach for Fatigue Monitoring

    International Nuclear Information System (INIS)

    Evon, Keith; Gilman, Tim; Carney, Curt

    2012-01-01

    Many nuclear plants are making commitments to implement fatigue monitoring systems in support of license renewal. Current fatigue monitoring systems use the methodology of ASME Code Subarticle NB-3200, which is a design code intended to compute a bounding cumulative usage factor (CUF). The first generation of fatigue monitoring software utilized a simplified, single stress term assumption and classical stress cycle-counting methods that take order into account such as Rainflow or Ordered Overall Range counting. Recently, the NRC has indicated in Regulatory Issue Summary 2008-30 that any fatigue analyses in support of License Renewal should use ASME Code Section III methodologies considering all six stress components. In addition, fatigue calculations for the license renewal term are required to consider the effects of environment. The implementation of a six stress term NB-3200 fatigue calculation to a Boiling Water Reactor (BWR) feedwater nozzle, including environmental effects, is the topic of this paper. Differences in results between the advanced methodology and the simplified methodology are discussed. (author)

  16. Fatigue Monitoring Tool for Airline Operators (FMT

    Directory of Open Access Journals (Sweden)

    Gislason Sigurdur Hrafn

    2017-12-01

    Full Text Available A Fatigue Monitoring Tool (FMT model was constructed for an operational airline in order to manage the fatigue levels of their crews in accordance with Fatigue Risk Management System (FRMS practices. This article describes the implementation of the Fatigue Monitoring Tool model and the airline’s aims to put the recent scientific findings on aviation fatigue into practical use. The model consists of proxy points allotted to various duties and rest periods.

  17. Fatigue Reliability of Offshore Wind Turbine Systems

    DEFF Research Database (Denmark)

    Marquez-Dominguez, Sergio; Sørensen, John Dalsgaard

    2012-01-01

    of appropriate partial safety factors / fatigue design factors (FDF) for steel substructures of offshore wind turbines (OWTs). The fatigue life is modeled by the SN approach. Design and limit state equations are established based on the accumulated fatigue damage. The acceptable reliability level for optimal...... fatigue design of OWTs is discussed and results for reliability assessment of typical fatigue critical design of offshore steel support structures are presented....

  18. Efficacité des néonicotinoïdes et des pyréthrinoïdes utilisés contre le ...

    African Journals Online (AJOL)

    Efficacité des néonicotinoïdes et des pyréthrinoïdes utilisés contre le foreur des tiges du cacaoyer ( Eulophonotus myrmeleon Felder : Lepidoptera, Cossidae). Implications dans la stratégie de protection de la cacaoculture en Côte d'Ivoire.

  19. Fatigue life prediction in composites

    CSIR Research Space (South Africa)

    Huston, RJ

    1994-01-01

    Full Text Available Because of the relatively large number of possible failure mechanisms in fibre reinforced composite materials, the prediction of fatigue life in a component is not a simple process. Several mathematical and statistical models have been proposed...

  20. Fatigue Fighters in Sjogren's Syndrome

    Science.gov (United States)

    ... your doctor to find a specific cause and treatment for your fatigue. The possibilities may include systemic inflammation, poor sleep, fibromyalgia, depression, hypothyroidism, muscle inflammation or side-effects of medications. Know ...

  1. Fatigue and Corrosion in Metals

    CERN Document Server

    Milella, Pietro Paolo

    2013-01-01

    This textbook, suitable for students, researchers and engineers, gathers the experience of more than 20 years of teaching fracture mechanics, fatigue and corrosion to professional engineers and running experimental tests and verifications to solve practical problems in engineering applications. As such, it is a comprehensive blend of fundamental knowledge and technical tools to address the issues of fatigue and corrosion. The book initiates with a systematic description of fatigue from a phenomenological point of view, since the early signs of submicroscopic damage in few surface grains and continues describing, step by step, how these precursors develop to become mechanically small cracks and, eventually, macrocracks whose growth is governed by fracture mechanics. But fracture mechanics is also introduced to analyze stress corrosion and corrosion assisted fatigue in a rather advanced fashion. The author dedicates a particular attention to corrosion starting with an electrochemical treatment that mechanical e...

  2. Coping with cancer -- managing fatigue

    Science.gov (United States)

    ... How severe your fatigue is depends on the type of cancer you have, the stage of cancer, and ... distressed. These emotions can drain your energy and motivation. Medicines. Many of the medicines for treating pain, depression, insomnia, and ...

  3. Fatigue of internal combustion engines

    Science.gov (United States)

    Dumanois, P

    1924-01-01

    The above conditions enable the employment of a criterion of general fatigue which simultaneously takes account of both mechanical and thermal conditions, for the sake of comparing any projected engine with engines of the same type already in use.

  4. La gestion des résultats des entreprises innovantes

    OpenAIRE

    Dumas, Guillaume

    2014-01-01

    Cette thèse s’intéresse à la gestion des résultats dans le cadre des entreprises innovantes. Elle est constituée de trois articles. Dans le premier, il s’agit d’examiner si les résultats des entreprises innovantes sont gérés et si le stade de développement des innovations influence cette gestion des résultats. Il apparaît que les résultats des entreprises innovantes sont gérés à la hausse. Cette gestion ne semble intervenir qu’au cours de l’activité d’innovation (c’est-à-dire lorsque les entr...

  5. Fatigue, burnout, and chronic fatigue syndrome among employees on sick leave: do attributions make the difference?

    NARCIS (Netherlands)

    Huibers, M.J.H.; Beurskens, A.J.H.M.; Prins, J.B.; Kant, I.J.; Bazelmans, H.M.; Schayck, C.P. van; Knottnerus, J.A.; Bleijenberg, G.

    2003-01-01

    BACKGROUND: Persistent fatigue among employees, burnout, and chronic fatigue syndrome (CFS) are three fatigue conditions that share some characteristics in theory. However, these conditions have not been compared in empirical research, despite conceptual similarities. METHODS: This cross sectional

  6. Are There Any Natural Remedies That Reduce Chronic Fatigue Associated with Chronic Fatigue Syndrome?

    Science.gov (United States)

    ... natural remedies that reduce chronic fatigue associated with chronic fatigue syndrome? Answers from Brent A. Bauer, M.D. Researchers ... a variety of natural products for effectiveness against chronic fatigue syndrome. Most results have been disappointing. A few remedies — ...

  7. Fatigue Perceived by Multiple Sclerosis Patients Is Associated With Muscle Fatigue

    NARCIS (Netherlands)

    Steens, Anneke; de Vries, Astrid; Hemmen, Jolien; Heersema, Thea; Heerings, Marco; Maurits, Natasha; Zijdewind, Inge

    Background. Fatigue is a debilitating symptom in multiple sclerosis (MS). Previous studies showed no association between fatigue as perceived by the patient and physiological measures of fatigability. Objective. The authors investigated associations between perceived fatigue and measures of

  8. Ultrasonic sizing of fatigue cracks

    International Nuclear Information System (INIS)

    Burns, D.J.

    1983-12-01

    Surface and buried fatigue cracks in steel plates have been sized using immersion probes as transmitters-receivers, angled to produce shear waves in the steel. Sizes have been estimated by identifying the ultrasonic waves diffracted from the crack tip and by measuring the time taken for a signal to travel to and from the crack tip. The effects of compression normal to a fatigue crack and of crack front curvature are discussed. Another diffraction technique, developed by UKAEA, Harwell, is reviewed

  9. Des dispositions responsables à prendre pour la protection des ...

    African Journals Online (AJOL)

    En considérant l'effet néfaste des maladies, des parasites, du changement climatique et d'autres facteurs environnementaux (les OGM par exemple) sur la survie des abeilles, la baisse de leurs populations dans certaines parties du monde ne saurait être attribuée aux seules pesticides. En plus, l'impact de ces derniers sur ...

  10. Aspects des Onychomycoses chez des patients camerounais de ...

    African Journals Online (AJOL)

    ... biologiques et évolutifs des onychomycoses chez des patients camerounais. Méthode : Il s'agit d'une étude rétrospective et descriptive menée de mars 2011 à mars 2014 dans l'unité de dermatologie de l'hôpital général de Douala (HGD), incluant des patients chez lesquels le diagnostic d'onychomycose avait été posé.

  11. Measurement of fatigue in industries.

    Science.gov (United States)

    Saito, K

    1999-04-01

    Fatigue of workers is a complex phenomenon resulting from various factors in technically innovated modern industries, and it appears as a feeling of exhaustion, lowering of physiological functions, breakdown of autonomic nervous balance, and decrease in work efficiency. On the other hand industrial fatigue is caused by excessive workload, remarkable alteration in working posture and diurnal and nocturnal rhythms in daily life. Working modes in modern industries have changed from work with the whole body into that with the hands, arms, legs and/or eyes which are parts of the body, and from physical work to mental work. Visual display terminal (VDT) work is one of the most characteristic jobs in the various kinds of workplaces. A large number of fatigue tests have already been adopted, but it is still hard to draw a generalized conclusion as to the method of selecting the most appropriate test battery for a given work load. As apparatus for fatigue measurement of VDT work we have developed VRT (Visual Reaction Test) and the Portable Fatigue Meter. Furthermore, we have presented immune parameters of peripheral blood and splenic T cells for physical fatigue.

  12. Usages des TIC et socialisation professionnelle des enseignants-chercheurs

    OpenAIRE

    Lavielle-Gutnik, Nathalie; Massou, Luc

    2013-01-01

    En prenant appui sur une nouvelle analyse des données recueillies dans l’enquête Tec-Meus (2008-2011, MSH Lorraine) sur la place accordée par des enseignants-chercheurs en sciences humaines et sociales aux technologies de l’information et de la communication (TIC) dans leur activité d’enseignement, nous souhaitons nous focaliser dans cet article sur la compréhension des processus de socialisation professionnelle en jeu dans leur usage déclaré des TIC. Par socialisation professionnelle, nous e...

  13. Ion-molecule interactions of biological importance. A vibrational spectroscopic study of magnesium complexes with hydroxylated quinones; Interactions ions-molecules d'interet biologique. Etude par spectrometrie de vibrations de la complexation du magnesium avec des molecules quinoniques hydroxylees

    Energy Technology Data Exchange (ETDEWEB)

    Kirszenbaum, Marek

    1976-06-14

    Luteoskyrin and rugulosin are two naturally occurring yellow pigments with hydroxylated bis-anthraquinonic structures. They cause serious liver disorders in man due to the formation of complexes of the type pigment-Mg{sup 2+}-DNA. In order to elucidate the structure of these complexes we have studied the vibrational spectra of some model systems, namely 1-hydroxy- and 1,4-dihydroxyanthraquinone, their magnesium chelate complexes, and a series of simpler complexes as the acetylacetonates of some divalent metals. Complete vibrational assignment are proposed for anthraquinone-9,10, the two hydroxylated and deureroxylated derivatives and their magnesium complexes. The substitution of {sup 26}Mg in place of {sup 24}Mg in these complexes enabled us to assign the Mg-O vibrations; their number corresponds to a hexa-coordinated metal in the acetylacetonate case and to a tetra-coordinated structure in the anthraquinone-olates complexes. The position of the ν C=0 and ν C-0 vibrations bands in the complexes shows that the bonds in the chelated ring of Mg(1-O-AQ){sub 2} retains their single and double bond characteristic whereas in the CMg(1,4-O{sub 2},-AQ){sub n} a resonating structure appears in the ring. The study of the IR and R spectra of the complexes enabled a tetrahedral structure to be proposed for the oxygens around the magnesium. Finally it was noted that the Mg-O bonds possessed a high degree of covalent character. (author) [French] La luteoskyrine et la rugulosine, deux pigments jaunes de structure de bis-anthraquinones hydroxylees, provoquent des troubles hepatiques graves par la formation des complexes pigment-Mg{sup 2+}-ADN. Dans le but d'eclaircir la structure de ces complexes nous avons etudie, par spectrometrie de vibrations, les systemes-modeles suivants: la 1-hydroxy- et la 1,4-dihydroxyanthraquinones, leurs complexes magnesies et une serie des complexes plus simples, tels que les acetylacetonates. de metaux divalents. Nous avons propose une attribution

  14. MODELS OF FATIGUE LIFE CURVES IN FATIGUE LIFE CALCULATIONS OF MACHINE ELEMENTS – EXAMPLES OF RESEARCH

    Directory of Open Access Journals (Sweden)

    Grzegorz SZALA

    2014-03-01

    Full Text Available In the paper there was attempted to analyse models of fatigue life curves possible to apply in calculations of fatigue life of machine elements. The analysis was limited to fatigue life curves in stress approach enabling cyclic stresses from the range of low cycle fatigue (LCF, high cycle fatigue (HCF, fatigue limit (FL and giga cycle fatigue (GCF appearing in the loading spectrum at the same time. Chosen models of the analysed fatigue live curves will be illustrated with test results of steel and aluminium alloys.

  15. Direction des Publications

    African Journals Online (AJOL)

    Synthese

    Unité de Recherche des Matériaux et des Energies Renouvelables (U.R.M.E.R). Université Abou –Baker Belkaid B.p : 119 Tlemcen 13000 Algerie. 2. Unité de Développement de la Technologie Du Silicium. UDTS, BP 399, Alger, Algérie. Accepté le : 08/06/2011. صخلم. داوﻣﻟا نﻣ ﻲﺗﻟا ﺔﺻﺎﺧو ،ﺔﻋﺎﻧﺻ يأ رﯾوطﺗ ﻲﻓ ﺎﯾﺳﯾﺋر ﻼﻣﺎﻋ ةرﯾﺧﻷا تاوﻧﺳﻟا ...

  16. Mykotische Infektionen des Penis

    Directory of Open Access Journals (Sweden)

    Mayser P

    1999-01-01

    Full Text Available Die häufigste mykotische Infektion des Penis stellt die Balanitis/Balonoposthitis durch Candida albicans dar. Sie weist eine steigende Inzidenz auf und scheint vornehmlich durch Genitalverkehr übertragen zu werden. Penile Infektionen durch Dermatophyten sind sehr selten, obwohl die Tinea inguinalis zu den häufigeren Erkrankungen zählt. Eine Mitbeteiligung des Penis im Rahmen von Systemmykosen kennzeichnet zumeist ein schwer verlaufende Erkrankung. Ursächlich kann beim immunoinkompetenten Patienten nahezu jeder Erreger in Frage kommen. Biopsie sowie Gewebekultur aus den meist ulzerativen Veränderungen können die Diagnose sichern. Die meisten superfiziellen Infektionen sprechen zufriedenstellend auf eine topische antimykotische Behandlung an, insbesondere wenn Provokationsfaktoren und die Möglichkeit der sexuellen Transmission berücksichtigt werden. Ausgedehnte Infektionen durch Dermatophyten, Hefen und natürlich systemische Infektionen erfordern eine systemische antimykotische Therapie.

  17. Chimie des processus biologiques

    OpenAIRE

    Fontecave, Marc

    2014-01-01

    Cours : Chimie biologique radicalaire : de l’origine de l’ADN au métabolisme d’aujourd’hui Il est généralement admis que les radicaux libres, espèces chimiques très réactives, sont des poisons pour les systèmes vivants qui ont élaboré des mécanismes efficaces pour s’en protéger et s’en débarrasser lorsqu’ils viennent à se former, par accident. Par exemple ce qu’on appelle communément le stress oxydant est une situation caractérisée par une accumulation de radicaux issus de l’oxygène moléculai...

  18. Biaxial fatigue of metals the present understanding

    CERN Document Server

    Schijve, Jaap

    2016-01-01

    Problems of fatigue under multiaxial fatigue loads have been addressed in a very large number of research publications. The present publication is primarily a survey of biaxial fatigue under constant amplitude loading on metal specimens. It starts with the physical understanding of the fatigue phenomenon under biaxial fatigue loads. Various types of proportional and non-proportional biaxial fatigue loads and biaxial stress distributions in a material are specified. Attention is paid to the fatigue limit, crack nucleation, initial micro crack growth and subsequent macro-crack in different modes of crack growth. The interference between the upper and lower surfaces of a fatigue crack is discussed. Possibilities for predictions of biaxial fatigue properties are analysed with reference to the similarity concept. The significance of the present understanding for structural design problems is considered. The book is completed with a summary of major observations.

  19. Fatigue after Stroke: The Patient's Perspective

    Directory of Open Access Journals (Sweden)

    Victoria Louise Barbour

    2012-01-01

    Full Text Available Background. Fatigue after stroke is common and distressing to patients. Aims. Our aims were to explore patients' perceptions of post-stroke fatigue, including the causes of fatigue and the factors that alleviate fatigue, in a mixed methods study. Results. We interviewed 15 patients who had had a stroke and were inpatients on stroke rehabilitation wards. A substantial proportion of patients reported that their fatigue started at the time of their stroke. Various different factors were reported to improve fatigue, including exercise, good sleep, rehabilitation and rest. Fatigue influences patients' sense of “control” after their stroke. Conclusion. Our results are consistent with the possibility that poststroke fatigue might be triggered by factors that occur at the time of the stroke (e.g., the stroke lesion itself, or admission to hospital and then exacerbated by poor sleep and boredom. These factors should be considered when developing complex interventions to improve post-stroke fatigue.

  20. La cogestion des Ressources naturelles

    International Development Research Centre (IDRC) Digital Library (Canada)

    L'eau, le sol, les nutriments, la lumière du soleil — ce sont des choses de la vie. .... habitent encore ces régions, soit de 9 % à 14 % de la population mondiale. ...... La guerre civile a fait vivre au Cambodge des années de chaos, d'anarchie et ...... et les allégeances politiques sont des facteurs qu'il est impossible d'ignorer.

  1. Des Ogle's old stump

    International Nuclear Information System (INIS)

    Jones, M.; Sutton, D.; Wallace, R.

    1998-01-01

    On 17 October 1997 Sylvia Bryan of RD4 Kaitaia wrote to 'Dear Somebody-Everybody' at the Anthropology Department, University of Auckland, urging further examination of an adzed stump found by Des Ogle during planting out of the Te Aupouri forest. The authors have since sought out relevant information and present it here for the interests of our readers. (author). 7 refs., 1 fig

  2. Fatigue monitoring desktop guide

    International Nuclear Information System (INIS)

    Woods, K.; Thomas, K.

    2012-01-01

    The development of a program for managing material aging (MMG) in the nuclear industry requires a new and different perspective. The classical method for MMG is cycle counting, which has been shown to have limited success. The classical method has been successful in satisfying the ductile condition per the America Society of Mechanical Engineers' (ASME) design criteria. However, the defined material failure mechanism has transformed from through-wall cracking and leakage (ASME) to crack initiation (NUREG-6909). This transformation is based on current industry experience with material degradation early in plant life and can be attributed to fabrication issues and environment concerns where cycle counting has been unsuccessful. This new perspective provides a different approach to cycle counting that incorporates all of the information about the material conditions. This approach goes beyond the consideration of a static analysis and includes a dynamic assessment of component health, which is required for operating plants. This health definition should consider fabrication, inspections, transient conditions and industry operating experience. In addition, this collection of information can be transparent to a broader audience that may not have a full understanding of the system design or the potential causes of early material degradation. This paper will present the key points that are needed for a successful fatigue monitoring desktop guide. (authors)

  3. Fatigue monitoring desktop guide

    Energy Technology Data Exchange (ETDEWEB)

    Woods, K. [InnoTech Engineering Solutions, LLC (United States); Thomas, K. [Nebraska Public Power District (United States)

    2012-07-01

    The development of a program for managing material aging (MMG) in the nuclear industry requires a new and different perspective. The classical method for MMG is cycle counting, which has been shown to have limited success. The classical method has been successful in satisfying the ductile condition per the America Society of Mechanical Engineers' (ASME) design criteria. However, the defined material failure mechanism has transformed from through-wall cracking and leakage (ASME) to crack initiation (NUREG-6909). This transformation is based on current industry experience with material degradation early in plant life and can be attributed to fabrication issues and environment concerns where cycle counting has been unsuccessful. This new perspective provides a different approach to cycle counting that incorporates all of the information about the material conditions. This approach goes beyond the consideration of a static analysis and includes a dynamic assessment of component health, which is required for operating plants. This health definition should consider fabrication, inspections, transient conditions and industry operating experience. In addition, this collection of information can be transparent to a broader audience that may not have a full understanding of the system design or the potential causes of early material degradation. This paper will present the key points that are needed for a successful fatigue monitoring desktop guide. (authors)

  4. A study by internal friction of defects produced in iron and nickel irradiated at very low temperatures; Etude au moyen du frottement interne des defauts crees par irradiation a tres basse temperature dans le fer et le nickel

    Energy Technology Data Exchange (ETDEWEB)

    Keating-Hart, G de [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1969-07-01

    This work represents a contribution to the study of point defects in metals. After a brief review of the theory of internal friction we will discuss some technical innovations aimed at increasing the flexibility of the apparatus at our disposal. These innovations have allowed us to extend our range of measurements down to 20 deg. K. We will then discuss our experimental results. Firstly, we describe preliminary experiments on electron irradiated iron and the evidence for a laminar structure. Secondly, we present and account of the first measurements on nickel after neutron irradiation at 27 deg. K. We will compare the results with those obtained by other methods in this laboratory. Essentially we have observed transitory peaks at low temperature due to close Frenkel pairs and we have noticed the absence of a peak which would correspond to the magnetic after effect band of stage I{sub E}. An attempt is made to explain the disappearance of the observed peaks upon the application of an internal saturating magnetic field. (author) [French] Ce memoire constitue une contribution a l'etude des defauts ponctuels dans les metaux. Apres un bref apercu theorique sur le frottement interne, nous presenterons quelques realisations techniques destinees a accroitre les possibilites des instruments qui nous ont ete confies. Ces dernieres nous ont permis d'etendre la gamme des mesures jusqu'a 20 deg. K. Nous parlerons ensuite de nos resultats experimentaux. En premier lieu, ceux obtenus au cours de premieres experiences, sur le fer irradie aux electrons mettent en evidence des structures de laminage. En second lieu, nous exposerons les premieres mesures realisees sur du nickel irradie aux neutrons; nous comparerons ces resultats avec ceux obtenus par d'autres moyens experimentaux dans le laboratoire. Nous avons observe essentiellement des pics fugitifs a basse temperature dus aux paires proches de Frenckel et nous avons constate l'absence d'un pic correspondant a la bande de tramage

  5. Grundlagen des Tissue Engineering

    Science.gov (United States)

    Mayer, Jörg; Blum, Janaki; Wintermantel, Erich

    Die Organtransplantation stellt eine verbreitete Therapie dar, um bei krankheitsoder unfallbedingter Schädigung eines Organs die Gesamtheit seiner Funktionen wieder herzustellen, indem es durch ein Spenderorgan ersetzt wird. Organtransplantationen werden für die Leber, die Niere, die Lunge, das Herz oder bei schweren grossflächigen Verbrennungen der Haut vorgenommen. Der grosse apparative, personelle und logistische Aufwand und die Risiken der Transplantationschirurgie (Abstossungsreaktionen) sowie die mangelnde Verfügbarkeit von immunologisch kompatiblen Spenderorganen führen jedoch dazu, dass der Bedarf an Organtransplantaten nur zu einem sehr geringen Teil gedeckt werden kann. Sind Spenderorgane nicht verfügbar, können in einzelnen Fällen lebenswichtige Teilfunktionen, wie beispielsweise die Filtrationsfunktion der Niere durch die Blutreinigung mittels Dialyse ersetzt oder, bei mangelnder Funktion der Bauchspeicheldrüse (Diabetes), durch die Verabreichung von Insulin ein normaler Zustand des Gesamtorganismus auch über Jahre hinweg erhalten werden. Bei der notwendigen lebenslangen Anwendung apparativer oder medikamentöser Therapie können für den Patienten jedoch häufig schwerwiegende, möglicherweise lebensverkürzende Nebenwirkungen entstehen. Daher werden in der Forschung Alternativen gesucht, um die Funktionen des ausgefallenen Organs durch die Implantation von Zellen oder in vitro gezüchteten Geweben möglichst umfassend wieder herzustellen. Dies erfordert biologisch aktive Implantate, welche die für den Stoffwechsel des Organs wichtigen Zellen enthalten und einen organtypischen Stoffwechsel entfalten.

  6. Dictionnaire des risques psychosociaux

    CERN Document Server

    Zawieja, Philippe

    2014-01-01

    Stress, suicide, harcèlement, épuisement professionnel, workaholism... Au-delà de la souffrance qu'elles désignent, ces notions souvent récentes constituent une approche inédite, et demandent à mieux être comprises, dans leur ensemble et isolément. C'est tout l'enjeu de ce dictionnaire, pionnier en son genre. Le lecteur y trouvera représentés, avec les 314 entrées (rédigées par 251 contributeurs) qui le composent, tous les champs disciplinaires s'intéressant à la souffrance au travail : psychologie du travail et des organisations, psychologie sociale et psychosociologie, psychanalyse, psychopathologie et psychiatrie, ergonomie, sociologie du travail et des organisations, médecine du travail, droit du travail et de la sécurité sociale, sciences de gestion, philosophie... Y sont détaillés les principaux concepts, notions, approches, méthodes, théories, outils, études, etc., ayant cours dans l'étude des risques psychosociaux, mais aussi certaines professions emblématiques (infirmières,...

  7. Le vernis des apparences

    Directory of Open Access Journals (Sweden)

    Grazia Nicosia

    2010-04-01

    Full Text Available Le but de cet article est de comprendre l’incidence sémiotique du nettoyage d’un tableau ainsi que la résultante cognitive induite sur l’observateur. Cette étude confronte l’analyse des phénomènes visuels engendrés par le jaunissement du vernis et son retrait, à des entretiens réalisés à dessein. Le retrait d’un vernis jauni change considérablement l’image. L’heure, le climat, la saison et l’activité même des personnages s’en trouvent ainsi modifié. La patine peut être perçue, soit comme un obstacle à l’exploration, soit pour ceux qui l’apprécient, comme le medium d’une relation plus intime entre l’œuvre et l’observateur.The purpose of this article is to understand the semiotic impact of the cleaning of a painting and the cognitive effects induced on the observer. This study analyses conjointly the visual phenomenon generated by yellowing varnish and its removal and controlled interviews of observers.The removal of yellowing varnish modifies considerably the perception of the picture. Daytime, climate, season and characters activities are modified. The patina may be perceived either as an obstacle to the painting exploration, or, for those who appreciate it, as a medium for a closer relationship between the painting and the observer.

  8. Harmonische Reduktion des linken Ventrikels

    OpenAIRE

    Atila, M. (Mehmet)

    2005-01-01

    In der vorliegenden Arbeit wurde die harmonische Reduktion des linken Ventrikels am Modell des ausgewachsenen Hausschweins, unter Verwendung von Saugkappen variabler Größe untersucht. In 10 Schweinen mit Herzen normaler Größe und Funktion wurde eine Saugkappe, in Größe und Form an das abzufaltende Wandsegment angepasst, auf die epikardiale Oberfläche des schlagenden Herzens gesetzt. Wir führten Messungen der linksventrik. und der pulmonalart. Drücke, des ventrikulären Durchmessers und der Her...

  9. Fatigue analysis of aluminum drill pipes

    Directory of Open Access Journals (Sweden)

    João Carlos Ribeiro Plácido

    2005-12-01

    Full Text Available An experimental program was performed to investigate the fundamental fatigue mechanisms of aluminum drill pipes. Initially, the fatigue properties were determined through small-scale tests performed in an optic-mechanical fatigue apparatus. Additionally, full-scale fatigue tests were carried out with three aluminum drill pipe specimens under combined loading of cyclic bending and constant axial tension. Finally, a finite element model was developed to simulate the stress field along the aluminum drill pipe during the fatigue tests and to estimate the stress concentration factors inside the tool joints. By this way, it was possible to estimate the stress values in regions not monitored during the fatigue tests.

  10. Sleep complaints and fatigue of airline pilots.

    Science.gov (United States)

    Reis, Cátia; Mestre, Catarina; Canhão, Helena; Gradwell, David; Paiva, Teresa

    2016-01-01

    This work aimed to determine daytime sleepiness and sleep complaints prevalence and the corresponding influence on perceived fatigue and to evaluate the influence of sociodemographic parameters and labour variables on sleep complaints, sleepiness and fatigue. A questionnaire was developed including socio-economic and labour issues and instruments, focused in sleep and fatigue. The response rate was 32% and the final sample had 435 pilots. The prevalence of sleep complaints was 34.9%, daytime sleepiness 59.3% and fatigue 90.6%. The high prevalence of sleep complaints, sleepiness and fatigue was disclosed in pilots, with those who fly short/medium having an added risk of fatigue.

  11. The role of central and peripheral muscle fatigue in postcancer fatigue: a randomized controlled trial.

    Science.gov (United States)

    Prinsen, Hetty; van Dijk, Johannes P; Zwarts, Machiel J; Leer, Jan Willem H; Bleijenberg, Gijs; van Laarhoven, Hanneke W M

    2015-02-01

    Postcancer fatigue is a frequently occurring problem, impairing quality of life. Little is known about (neuro)physiological factors determining postcancer fatigue. It may be hypothesized that postcancer fatigue is characterized by low peripheral muscle fatigue and high central muscle fatigue. The aims of this study were to examine whether central and peripheral muscle fatigue differ between fatigued and non-fatigued cancer survivors and to examine the effect of cognitive behavioral therapy (CBT) on peripheral and central muscle fatigue of fatigued cancer survivors in a randomized controlled trial. Sixteen fatigued patients in the intervention group (CBT) and eight fatigued patients in the waiting list group were successfully assessed at baseline and six months later. Baseline measurements of 20 fatigued patients were compared with 20 non-fatigued patients. A twitch interpolation technique and surface electromyography were applied, respectively, during sustained contraction of the biceps brachii muscle. Muscle fiber conduction velocity (MFCV) and central activation failure (CAF) were not significantly different between fatigued and non-fatigued patients. Change scores of MFCV and CAF were not significantly different between patients in the CBT and waiting list groups. Patients in the CBT group reported a significantly larger decrease in fatigue scores than patients in the waiting list group. Postcancer fatigue is neither characterized by abnormally high central muscle fatigue nor by low peripheral muscle fatigue. These findings suggest a difference in the underlying physiological mechanism of postcancer fatigue vs. other fatigue syndromes. Copyright © 2015 American Academy of Hospice and Palliative Medicine. Published by Elsevier Inc. All rights reserved.

  12. Contribution to the study and use of ionisation chambers for nuclear reactor control (1965); Contribution a l'etude et a l'utilisation des chambres d'ionisation pour le controle des reacteurs nucleaires (1965)

    Energy Technology Data Exchange (ETDEWEB)

    Duchene, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1961-02-15

    high-power reactors. (author) [French] Les chambres d'ionisation sont actuellement les detecteurs les mieux adaptes au controle des reacteurs nucleaires par des mesures neutroniques. Nous avons cru bon de rappeler quelques generalites concernant la dynamique des reacteurs, les differents procedes de detection des neutrons, le fonctionnement des chambres d'ionisation et les methodes de mesure utilisees. Notre contribution aux techniques de controle des reacteurs consiste d'une part en une tentative de synthese des facteurs intervenant dans le fonctionnement des chambres d'ionisation, l'etude de ces facteurs, et d'autre part l'elaboration de chambres d'ionisation a fission et a bore permettant de suivre la marche d'un reacteur du demarrage jusqu'a la puissance maximale. Dans le domaine des chambres a fission, nous avons en particulier ameliore les techniques de depot d'oxyde d'uranium sur l'aluminium et realise la mise au point de depots par electrolyse sur d'autres metaux: acier inoxydable, cuivre, molybdene, nickel, tantale, titane, kovar, tungstene et beryllium. Nous avons elabore plusieurs types de chambres a fission servant au demarrage des reacteurs: un type de performances moyennes actuellement utilise dans les piles francaises un type a haute sensibilite un type a haute temperature qui a fonctionne jusqu'a 600 deg. C. En ce qui concerne les chambres a bore, nous avons etudie les perturbations apportees dans les mesures par l'exposition des chambres a d'importants flux de neutrons et a un rayonnement {gamma} intense. Cette exposition produit une modification des proprietes des materiaux constitutifs et la production dans les chambres d'un bruit de fond qui peut gener considerablement les mesures neutroniques. Nous avons montre que la technique de compensation permettait de limiter l'importance de ce bruit de fond et d'augmenter ainsi la plage de fonctionnement des chambres d'ionisation classiques destinees aux mesures de puissance. Enfin, nous avons realise deux

  13. La recherche en action : des solutions locales, des effets durables ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    15 déc. 2010 ... Le Centre de recherches pour le développement international (CRDI) appuie la production et l'application de connaissances qui améliorent de façon notable la situation des habitants des pays en développement.

  14. Analyse des caractéristiques structurelles et des performances ...

    African Journals Online (AJOL)

    SARAH

    28 févr. 2014 ... performances technico-économiques de la riziculture irriguée en Côte d' .... en nous basant sur les prix des intrants et des produits en vigueur au cours ..... la recherche et de la vulgarisation et le transfert de technologies ; (2) ...

  15. Evaluation des pratiques de gestion des adventices en riziculture

    African Journals Online (AJOL)

    Les résultats ont montré que les méthodes de gestion de l'enherbement ont .... Le contrôle des adventices en riziculture irriguée a principalement .... mesurer la hauteur des plantes et la longueur ..... Performance agronomique du Sys- tème de ...

  16. Diversification des moyens de subsistance des petits producteurs de ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    L'économie du Malawi repose essentiellement sur la culture du tabac, qui représente plus de 70 % des revenus d'exportation. Pour 60 % des 100 000 membres de la National Smallholder Farmers' Association of Malawi (NASFAM), le tabac est la seule et unique source de revenus. Les cultivateurs de tabac, au Malawi ...

  17. Culture du bambou : diversification des moyens de subsistance des ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Culture du bambou : diversification des moyens de subsistance des petits producteurs de tabac du sud de la province de Nyanza, au Kenya - phase II. Au cours de la première phase du projet (projet no 103765), les chercheurs ont effectué une analyse de marché pour le bambou et les produits du bambou, comparé les ...

  18. Roles et taches des accompagnateurs des patients hospitalises ...

    African Journals Online (AJOL)

    Roles et taches des accompagnateurs des patients hospitalises dans le service de pneumo-phtysiologie au Centre Hospitalier Universitaire Yalgado Ouedraogo de ... Logistical support represented by material support, drug supply, cleaning of premises, and littering occupied respectively 100%, 91%, 42% and 73%.

  19. Importance of fatiguing, overtraining and chronic fatigue in athletes

    Directory of Open Access Journals (Sweden)

    Adam Piesik

    2017-09-01

    Full Text Available Each training that requires achieving a higher heart rate limit and/or increased concentration in time may cause fatigue, considered to be a natural defence mechanism of a body. In the case of excessive fatigue and insufficient time designated for rest and regeneration, an overtraining syndrome (OTS may develop. The main symptom of overtraining is increased fatigue that fails to become reversed in normal conditions of regeneration. Although authors are familiar with the overtraining syndrome and associated symptoms, as of today no diagnostic tool has been developed that may form a basis for a final diagnosis, and the diagnosis itself is frequently based on a subjective assessment of the athlete. Possible causes of the band overtraining syndrome are disorders of sodium, inflammatory processes resulting from physical activity and / or disorders of the autonomic nervous system.

  20. High speed rails. Fatigue behaviour

    International Nuclear Information System (INIS)

    Duart, J. M.; Pero-Sanz, J. A.; Verdeja, J. I.

    2005-01-01

    In recent years, passenger train speed and freight train load have increased to enhance efficiency of rail road transportation. These trends have increased the severity of rail service conditions, calling for rails with greater wear resistance, strength and fatigue behaviour. In the United Stated and Europe, track site weld rails are made entirely by aluminothermic process. This work describes the results of experimental study conducted on bending fatigue strength of plain rails and aluminothermic welded rails with preheating procedures (oxipropane and air-induced propane) approved by railways authorities. Compliance with the required fatigue strength shall be ascertained by 4 point pulsating bending test in accordance with European standards by aluminothermic welding in rails. The locati method, based in the empirical Miner's law about the cumulative damage on a fatigue tested material, allows, once known the Wohler curve of the welding process in use to settle the fatigue tensile limit at 50% with only one test. The values obtained at 2.10''6 cycles for plain rails (S f =353 MPa), oxipropane preheated aluminothermic weld rails (S f =225 MPa), and propane-air induced aluminothermic weld rails (S f =210 MPa) are very similar to those resulting from test method stated in the European Standard. From our point of view and due to its ease, speediness and savings, this is the most suitable test to check the quality and compare the aluminothermic processes in use. (Author) 15 refs

  1. New Methods and Facilities for the Measurement of Physical Properties of Reactor Components and Irradiated Materials; Nouveaux Procedes et Instruments de Mesure des Proprietes Physiques des Elements de Reacteur et des Matieres Irradiees; Novye metody i sredstva izmereniya fizicheskikh s vojstv komponentov reaktora i obluchennykh materialov; Nuevos Metodos y Equipos para Medir Propiedades Fisicas de Componentes de Reactor y de Materiales Irradiados

    Energy Technology Data Exchange (ETDEWEB)

    Foerster, F.; Mueller, P. [Institut Dr. Foerster, Reutlingen, Federal Republic of Germany (Germany)

    1965-09-15

    direct reading of the permeability and stainless- steel components. The correlation between permeability and {Delta} ferrite content is explained. Measurements of the {Delta} ferrite percentage across welds in stainless-steel tubes and measurements of the {Delta} ferrite precipitations as a function of the plastic strain are discussed (hammer-forging of reactor fuel-elements). (author) [French] Les auteurs decrivent un instrument permettant de mesurer et d'enregistrer automatiquement le module de Young, le module de cisaillement et la capacite d'amortissement en fonction de la temperature et du temps. On mesure le module de Young en excitant des specimens de diverses dimensions a leur frequence propre. On mesure la capacite d'amortissement d'apres la libre decroissance de la vibration ou la largeur a mi-hauteur de la courbe de resonance. Le memoire donne des exemples de mesures de la guerison apres irradiation et apres deformation inelastique, ainsi que des exemples du degre de graphitisation. Les auteurs demontrent que l'on peut detecter des defauts et des variations de densite dans les banes de graphite. Ils expliquent, en outre, une methode d'etude de la fixation de pastilles d' UO{sub 2} sur des tubes en acier austenitique a parois minces. Us decrivent un four special pour l'etude du comportement elastique ou inelastique de specimens 'chauds ' a des temperatures variant entre 20 et 1000 Degree-Sign C. Les auteurs discutent le controle de la qualite de metaux non ferreux par mesure de ia conductivite electrique au moyen de courants de Foucault et decrivent un instrument permettant de mesurer sans aucun contact la conductivite electrique de metaux non ferreux. Ils expliquent la correlation entre la conductivite electrique et l'allongement sous l'effet des contraintes dans le cas de metaux et d'alliages non ferreux. Ils s'attachent particulierement a la mesure d'echantillons de petites dimensions. Ils decrivent un dispositif pour la mesure directe a distance dans la

  2. Perceived Fatigue Interference and Depressed Mood: Comparison of Chronic Fatigue Syndrome/Myalgic Encephalomyelitis Patients with Fatigued Breast Cancer Survivors.

    Science.gov (United States)

    Hall, Daniel L; Antoni, Michael H; Lattie, Emily G; Jutagir, Devika R; Czaja, Sara J; Perdomo, Dolores; Lechner, Suzanne C; Stagl, Jamie M; Bouchard, Laura C; Gudenkauf, Lisa M; Traeger, Lara; Fletcher, MaryAnn; Klimas, Nancy G

    Persistent fatigue and depressive symptoms are both highly prevalent among patients with Chronic Fatigue Syndrome/Myalgic Encephalomyelitis (CFS/ME) as well as breast cancer survivors. This study aimed to assess and directly compare perceptions of fatigue as highly interfering in one's daily functioning in both patient populations to better understand their relationships with depressed mood. Participants were 95 female CFS/ME patients and 67 females who were approximately 5 years post-treatment for stage 0-III breast cancer presenting with clinically elevated fatigue severity. Self-report measures were obtained on participants' fatigue-related interference in daily functioning and fatigue severity as well as depressed mood. Hierarchical regression was used to test effects controlling for relevant demographic, psychosocial, and medical covariates. CFS/ME patients endorsed greater depressed mood and fatigue interference than did fatigued breast cancer survivors, p's fatigued breast cancer survivors (β=.18, p =.19). CFS/ME patients reported elevated fatigue symptoms and depression relative to fatigued breast cancer survivors. In the former group, greater depressed mood was highly and significantly associated with greater fatigue-related inference in daily activities. Potential targets for cognitive behavioral interventions are discussed.

  3. fatigue strength of reinforced concrete flexural members

    African Journals Online (AJOL)

    Dr Obe

    1980-03-01

    Mar 1, 1980 ... cyclic loads behave differently compared with static bending and can collapse due to the fatigue of concrete, reinforcement or both when maximum fatigue stresses of ... under low and medium load levels, than under high load ...

  4. Development of an in situ fatigue sensor.

    Science.gov (United States)

    2011-01-01

    A prototype in situ fatigue sensor has been designed, constructed and evaluated experimentally for its ability to monitor the accumulation of fatigue damage in a cyclically loaded steel structure, e.g., highway bridge. The sensor consists of multiple...

  5. Wake up to fatigue risk management

    CSIR Research Space (South Africa)

    Schutte, PC

    2009-06-01

    Full Text Available fatigue management programme should address the unique needs of the operation in which it will be implemented, it should be integrated into the normal operations, and it should encourage active participation from all stakeholders. A fatigue management...

  6. High temperature fatigue behaviour of intermetallics

    Indian Academy of Sciences (India)

    M. Senthilkumar (Newgen Imaging) 1461 1996 Oct 15 13:05:22

    The effect of processing route on strain-controlled low cycle fatigue (LCF) life of binary ..... the once regarding close control of composition, control and reproduction of ... inverse effect of temperature on fatigue life seen in tests conducted in air.

  7. Compassion Fatigue in Pediatric Nurses.

    Science.gov (United States)

    Berger, Jill; Polivka, Barbara; Smoot, Elizabeth Ann; Owens, Heather

    2015-01-01

    Compassion fatigue in nursing has been shown to impact the quality of patient care and employee satisfaction and engagement. The aims of this study were to determine the prevalence and severity of compassion fatigue among pediatric nurses and variations in prevalence based on respondent demographics using a cross-sectional survey design. Nurses under 40 years of age, with 6-10 years of experience and/or working in a medical-surgical unit had significantly lower compassion satisfaction and higher levels of burnout. Secondary traumatic stress from caring for children with severe illness or injury or end of life was a key contributor to compassion fatigue. Copyright © 2015 Elsevier Inc. All rights reserved.

  8. Advanced methods of fatigue assessment

    CERN Document Server

    Radaj, Dieter

    2013-01-01

    The book in hand presents advanced methods of brittle fracture and fatigue assessment. The Neuber concept of fictitious notch rounding is enhanced with regard to theory and application. The stress intensity factor concept for cracks is extended to pointed and rounded corner notches as well as to locally elastic-plastic material behaviour. The averaged strain energy density within a circular sector volume around the notch tip is shown to be suitable for strength-assessments. Finally, the various implications of cyclic plasticity on fatigue crack growth are explained with emphasis being laid on the DJ-integral approach.   This book continues the expositions of the authors’ well known reference work in German language ‘Ermüdungsfestigkeit – Grundlagen für Ingenieure’ (Fatigue strength – fundamentals for engineers).

  9. Peridynamic model for fatigue cracking.

    Energy Technology Data Exchange (ETDEWEB)

    Silling, Stewart Andrew; Abe Askari (Boeing)

    2014-10-01

    The peridynamic theory is an extension of traditional solid mechanics in which the field equations can be applied on discontinuities, such as growing cracks. This paper proposes a bond damage model within peridynamics to treat the nucleation and growth of cracks due to cyclic loading. Bond damage occurs according to the evolution of a variable called the "remaining life" of each bond that changes over time according to the cyclic strain in the bond. It is shown that the model reproduces the main features of S-N data for typical materials and also reproduces the Paris law for fatigue crack growth. Extensions of the model account for the effects of loading spectrum, fatigue limit, and variable load ratio. A three-dimensional example illustrates the nucleation and growth of a helical fatigue crack in the torsion of an aluminum alloy rod.

  10. Utilisation sans risque des eaux usées, des excréta et des eaux ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Les responsables de ce projet piloteront l'application et l'adaptation des principes directeurs relatifs à l'utilisation sans risque des eaux usées, des excreta et des eaux grises en agriculture et en aquaculture (Guidelines for the Safe Use of Wastewater, Excreta and Greywater in Agriculture and Aquaculture), que ...

  11. Évolution des contraintes résiduelles dans la couche de diffusion d’un acier modèle Fe-Cr-C nitruré

    DEFF Research Database (Denmark)

    Jegou, Sébastien; Barrallier, Laurent; Somers, Marcel A. J.

    2011-01-01

    Limiter la fatigue et la corrosion des pièces est possible grâce à une nitruration. Des contraintes résiduelles en découlent. Le rôle de la diffusion du carbone sur le développement de ces contraintes a été étudié sur un acier modèle Fe-3%m.Cr-0.35%m.C.......Limiter la fatigue et la corrosion des pièces est possible grâce à une nitruration. Des contraintes résiduelles en découlent. Le rôle de la diffusion du carbone sur le développement de ces contraintes a été étudié sur un acier modèle Fe-3%m.Cr-0.35%m.C....

  12. Chronic Fatigue Syndrome: Review of the Literature

    OpenAIRE

    Turgeon, Sue A.

    1989-01-01

    Chronic fatigue syndrome, previously known as chronic mononucleosis or post-infectious fatigue, is a poorly understood illness characterized by chronic debilitating fatigue, recurrent flu-like symptoms, and few clinical or laboratory abnormalities. Attention was briefly focused on the Epstein-Barr virus (EBV) as a causal agent, but that hypothesis is now in serious doubt. While a significant incidence of psychiatric illness has been demonstrated among patients with the chronic fatigue syndrom...

  13. Fatigue crack growth in fiber reinforced plastics

    Science.gov (United States)

    Mandell, J. F.

    1979-01-01

    Fatigue crack growth in fiber composites occurs by such complex modes as to frustrate efforts at developing comprehensive theories and models. Under certain loading conditions and with certain types of reinforcement, simpler modes of fatigue crack growth are observed. These modes are more amenable to modeling efforts, and the fatigue crack growth rate can be predicted in some cases. Thus, a formula for prediction of ligamented mode fatigue crack growth rate is available.

  14. Fatigue of vanadium--hydrogen alloys

    International Nuclear Information System (INIS)

    Lee, K.S.; Stoloff, N.S.

    1975-01-01

    Hydrogen contents near and above the room temperature solubility limit increase the high cycle fatigue life but decrease low cycle life of polycrystalline vanadium. Changes in endurance limit with hydrides may be a consequence of decreased cyclic strain hardening coefficient, n'. 132 ppM hydrogen in solution has only a slightly beneficial effect on stress controlled fatigue life and essentially no effect on low cycle fatigue life. Unalloyed vanadium exhibits profuse striations, while hydrides produce cleavage cracks in fatigued samples. 10 fig

  15. Multispecimen fatigue crack propagation testing

    International Nuclear Information System (INIS)

    Ermi, A.M.; Bauer, R.E.; Chin, B.A.; Straalsund, J.L.

    1981-01-01

    Chains of miniature center-cracked-tension specimens were tested on a conventional testing machine and on a prototypic in-reactor fatigue machine as part of the fusion reactor materials alloy development program. Annealed and 20 percent cold-worked 316 stainless steel specimens were cycled under various conditions of temperature, frequency, stress ratio and chain length. Crack growth rates determined from multispecimen visual measurements and from an electrical potential technique were consistent with those obtained by conventional test methods. Results demonstrate that multispecimen chain testing is a valid method of obtaining fatigue crack propagation information for alloy development. 8 refs

  16. Fatigue data bases in Europe

    International Nuclear Information System (INIS)

    Olivier, R.; Koettgen, V.B.; Seeger, T.; Boller, C.

    1988-01-01

    Based on an inquiry with well-known European fatigue institutions the paper describes existing more or less extensive collections and data bases of S-N and crack growth data, mainly on unwelded and welded steel and aluminium in organizations and countries as follows: CEC, ESA, Federal Republic of Germany, GDR, Italy, Norway, Republic of Ireland, Switzerland, UK. This documentation of the present state is completed by a short survey on available European fatigue standards and design rules, serving as a data base for nominal materials data. Requirements for data base concepts, contents, user interface and data structure are presented in a short overview. (orig./HP)

  17. Direction des Publications

    African Journals Online (AJOL)

    Synthese

    mélange pulvérulent de coke et de calcaire. La réduction est assurée par le gaz CO à 1250°C [2]. Le procédé Kawazaki iron powder utilise la calamine comme matière première et aussi CO comme gaz réducteur pour élaborer des poudres de fer. [3]. Un autre procédé plus connu qui fabrique les poudres de fer à partir de la.

  18. Glossaire des sigles

    OpenAIRE

    2015-01-01

    ABM Anti-ballistic missile = Missile antimissile balistique AGM Air-to-ground missile = Missile air-sol AIEA Agence Internationale de l’Energie Atomique ALCM Air-launched cruise missile = Missile de croisière air-sol ANSEA Association des Nations du Sud-Est asiatique ANT* Arme nucléaire tactique ASAT Anti-satellite = Arme antisatellite ASW Anti-submarine warfare = Guerre anti-sous-marine AWACS Airborne warning and control system = Système aérien de contrôle et d’alerte BMD Ballistic missile d...

  19. Chronic fatigue syndrome: diagnosis and treatment | Revelas ...

    African Journals Online (AJOL)

    Chronic fatigue syndrome (CFS) refers to marked and prolonged fatigue, for which no indentifiable cause can be found. Despite the presence of extensive symptoms, diagnosis is made when there is profound fatigue, lasting for a duration of six months, or longer. CFS is frequently seen in association with psychiatric ...

  20. How do women with lupus manage fatigue?

    DEFF Research Database (Denmark)

    Kier, Anne Ørnholt; Midtgaard, Julie; Hougaard, Karin Sørig

    2016-01-01

    Objective: Half of patients with systemic lupus erythematosus (SLE) consider fatigue to be the most disabling disease symptom. To develop and promote strategies to prevent and control fatigue, this study aimed to describe how women with SLE manage the experience of fatigue. Methods: Four focus...

  1. [Epidemiology of fatigue in general practice].

    Science.gov (United States)

    Fuhrer, R

    1994-11-01

    The epidemiology of fatigue is not well known in France, and this study reports on factors associated with fatigue in a sample of 3,784 general practice patients. Prevalence rates according to several definitions of fatigue are presented and factors are examined that have been reported to be associated with fatigue. Although 41.2% of the sample report having experienced symptoms of fatigue for at least three days, only 7.6% declare fatigue as a reason for consulting a doctor. Women report more symptoms of fatigue, but they do not consult more often than men for this reason. Age is strongly correlated with fatigue, but this is found only for men. Socioprofessional category bears no relationship to fatigue as a reason for consultation, however, the diagnosis of fatigue is more often attributed to professionals and upper management than it is to office staff or skilled and unskilled workers. We do find a strong relationship between depressive symptomatology as measured by the Center for Epidemiologic Studies (CES-D) and fatigue; nonetheless, fatigue is neither sensitive nor specific to the diagnosis of depression.

  2. Fatigue modeling of materials with complex microstructures

    DEFF Research Database (Denmark)

    Qing, Hai; Mishnaevsky, Leon

    2011-01-01

    with the phenomenological model of fatigue damage growth. As a result, the fatigue lifetime of materials with complex structures can be determined as a function of the parameters of their structures. As an example, the fatigue lifetimes of wood modeled as a cellular material with multilayered, fiber reinforced walls were...

  3. Isolement et identification des levures.

    Directory of Open Access Journals (Sweden)

    S. DOMERCQ

    1967-06-01

    Full Text Available La fermentation du moût de raisin est assurée par les levures qui se trouvent sur la pellicule du raisin, sur les rafles, et aussi, par celles qui envahissent le matériel de vendange et de vinification dès que la récolte est commencée. L'apparition deLa fermentation du moût de raisin est assurée par les levures qui se trouvent sur la pellicule du raisin, sur les rafles, et aussi, par celles qui envahissent le matériel de vendange et de vinification dès que la récolte est commencée. L'apparition des signes de la fermentation est spontanée. La fermentation est rapide dans la majorité des cas, si elle devient trop violente et que la température s'élève dangeureusement, il faut la « canaliser », la calmer. Des accidents peuvent se produire; des arrêts de fermentation laissant des sucres non fermentés pouvant être attaqués par d'autres microorganismes, des développements de levures formant des substances nuisibles à la qualité; par la suite, il s'agit d'obtenir la stabilité du vin, en particulier, éviter les refermentations des vins doux. L'étude de ces problèmes nécessite une étude préliminaire, celle des levures responsables de la fermentation alcoolique du jus de raisin, qui ne peut être faite que sur des cultures pures, isolées au préalable à l'aide de prélèvements soigneusement réalisés.s signes de la fermentation est spontanée. La fermentation est rapide dans la majorité des cas, si elle devient trop violente et que la température s'élève dangeureusement, il faut la « canaliser », la calmer. Des accidents peuvent se produire; des arrêts de fermentation laissant des sucres non fermentés pouvant être attaqués par d'autres microorganismes, des développements de levures formant des substances nuisibles à la qualité; par la suite, il s'agit d'obtenir la stabilité du vin, en particulier, éviter les refermentations des vins doux. L'étude de ces problèmes nécessite une étude pr

  4. Le Débat des semences

    International Development Research Centre (IDRC) Digital Library (Canada)

    Solutions pour les lois nationales régissant le contrôle des ressources génétiques et des ...... des pouvoirs) qui reconnaissent, dans une certaine mesure, les droits de gestion collectifs des ...... documentés, les performances physiques, etc.

  5. Mécanique des sols et des roches

    CERN Document Server

    Vullier, Laurent; Zhao, Jian

    2016-01-01

    La mécanique des sols et la mécanique des roches sont des disciplines généralement traitées séparément dans la littérature. Pour la première fois, un traité réunit ces deux spécialités, en intégrant également les connaissances en lien avec les écoulements souterrains et les transferts thermiques. A la fois théorique et pratique, cet ouvrage propose tout d'abord une description détaillée de la nature et de la composition des sols et des roches, puis s'attache à la modélisation de problèmes aux conditions limites et présente les essais permettant de caractériser les sols et les roches, tant d'un point de vue mécanique qu'hydraulique et thermique. La problématique des sols non saturés et des écoulements multiphasiques est également abordée. Une attention particulière est portée aux lois de comportement mécanique et à la détermination de leurs paramètres par des essais in situ et en laboratoire, et l'ouvrage offre également une présentation détaillée des systèmes de classi...

  6. Chirurgie des grassmanniennes

    CERN Document Server

    Lafforgue, Laurent

    2003-01-01

    Les compactifications diverses de variétés de modules sont un thème important et récurrent des mathématiques modernes, et elles connaissent un grand nombre d'applications. Ce livre traite le cas de cellules de Schubert minces, qui sont de sous-variétés naturelles de grassmanniennes. L'auteur a été amené à traiter ces questions par un cas particulier lié à ses travaux sur le programme de Langlands. Dans cette monographie, il en développe une théorie plus systématique, présentant le fortes similarités avec celle des modules du courbes stables. The various compactifications of moduli spaces are an important recurrent theme of modern mathematics, and they have a large number of applications. This book treats the case of thin Schubert varieties, which are natural subvarieties of Grassmannians. The author was led to these questions by a particular case linked to his work on the Langlands program. In this monograph, he develops the theory in a more systematic way, which exhibits strong similarities...

  7. Perceived Fatigue Interference and Depressed Mood: Comparison of Chronic Fatigue Syndrome/Myalgic Encephalomyelitis Patients with Fatigued Breast Cancer Survivors

    Science.gov (United States)

    Hall, Daniel L.; Antoni, Michael H.; Lattie, Emily G.; Jutagir, Devika R.; Czaja, Sara J.; Perdomo, Dolores; Lechner, Suzanne C.; Stagl, Jamie M.; Bouchard, Laura C.; Gudenkauf, Lisa M.; Traeger, Lara; Fletcher, MaryAnn; Klimas, Nancy G.

    2015-01-01

    Objective Persistent fatigue and depressive symptoms are both highly prevalent among patients with Chronic Fatigue Syndrome/Myalgic Encephalomyelitis (CFS/ME) as well as breast cancer survivors. This study aimed to assess and directly compare perceptions of fatigue as highly interfering in one’s daily functioning in both patient populations to better understand their relationships with depressed mood. Methods Participants were 95 female CFS/ME patients and 67 females who were approximately 5 years post-treatment for stage 0-III breast cancer presenting with clinically elevated fatigue severity. Self-report measures were obtained on participants’ fatigue-related interference in daily functioning and fatigue severity as well as depressed mood. Hierarchical regression was used to test effects controlling for relevant demographic, psychosocial, and medical covariates. Results CFS/ME patients endorsed greater depressed mood and fatigue interference than did fatigued breast cancer survivors, p’sfatigued breast cancer survivors (β=.18, p=.19). Conclusions CFS/ME patients reported elevated fatigue symptoms and depression relative to fatigued breast cancer survivors. In the former group, greater depressed mood was highly and significantly associated with greater fatigue-related inference in daily activities. Potential targets for cognitive behavioral interventions are discussed. PMID:26180660

  8. Comportement des polluants des eaux pluviales urbaines en ...

    African Journals Online (AJOL)

    développement et la croissance des organismes vivant dans l'eau et particulièrement les micro- organismes. Le suivi des températures enregistrées oscille entre 9 et 16°C dans les trois sites d'observation durant la période ... de la lumière du soleil. Le site C est bien aéré et .... Effets de différents modes de gestion des eaux ...

  9. Hormone levels in radiotherapy treatment related fatigue

    International Nuclear Information System (INIS)

    Biswal, B.M.; Mallik, G.S.

    2003-01-01

    Radiotherapy is known to cause debilitating treatment related fatigue. Fatigue in general is a conglomeration of psychological, physical, hematological and unknown factors influencing the internal milieu of the cancer patient. Radiotherapy can add stress at the cellular and somatic level to aggravate further fatigue in cancer patients undergoing radiotherapy. Stress related hormones might be mediating in the development of fatigue. This is an ongoing prospective study to evaluate if the hormonal profile related to stress is influenced by radiotherapy treatment related fatigue. The study was conducted from September 2002 onwards in the division of Radiotherapy and Oncology of our Medical School. Previously untreated patients with histopathology proof of malignancy requiring external beam radiotherapy were considered for this study. Selection criteria were applied to exclude other causes of fatigue. Initial fatigue score was obtained using Pipers Fatigue Score questionnaire containing 23 questions, subsequently final fatigue score was obtained at the end of radiotherapy. Blood samples were obtained to estimate the levels of ACTH, TSH, HGH, and cortisol on the final assessment. The hormone levels were compared with resultant post radiotherapy fatigue score. At the time of reporting 50 patients were evaluable for the study. The total significant fatigue score was observed among 12 (24%) patients. The individual debilitating fatigue score were behavioral severity 14 (28%), affective meaning 14(28%), Sensory 13 (26%) and cognitive mood 10 (20%) respectively. From the analysis of hormonal profile, growth hormone level > 1 ng/mL and TSH <0.03 appears to be associated with high fatigue score (though statistically not significant); whereas there was no correlation with ACTH and serum cortisol level. In our prospective study severe radiotherapy treatment related fatigue was found among our patient population. Low levels of TSH and high levels of GH appear to be associated

  10. Fatigue damage of nuclear facilities

    International Nuclear Information System (INIS)

    2001-01-01

    The conference on the fatigue damage of nuclear facilities, organized by the SFEN (french society of nuclear energy), took place at Paris the 23. of november 2000. Eleven papers were presented, showing the state of the art and the research programs in the domain of the sizing rules, safety, installations damage, examination and maintenance. (A.L.B.)

  11. Thermal fatigue behavior of valves

    International Nuclear Information System (INIS)

    Moinereau, D.; Scliffet, L.; Capion, J.C.; Genette, P.

    1991-01-01

    This paper reports that valves of pressurized water reactors are exposed to thermal shocks during transient operations. The numerous thermal shock tests performed on valves on the EDF test facilities have shown the sensibility of fillets and geometrical discontinuities to thermal fatigue: cracks can appear in those areas and grow through the valve body. Valves systems designated as level 1 must be designed to withstand fatigue up to the second isolation valve: the relevant rule is specified in the paragraph B 3500 of the French RCCM code. It is a simplified method which doesn't require finite element calculations. Many valve systems have been designed according to this rule and have been operated without accident. However, in one case, important cracks were found in the fillet of a check-valve after numerous thermal shocks. Calculation of the valve's behavior according to the RCCM code to estimate the fatigue damage resulting from thermal shocks led to a low damage factor, which doesn't agree with the experimental results. This was confirmed by new testings and showed the inadequacy of B 3500 rule for thermal transients. On this base a new rule is proposed to estimate fatigue damage resulting from thermal shocks. An experimental program has been realized to validate this rule. Axisymetrical analytical mock-ups with different geometries and one check-valve in austenitic stainless steel 316 L have been submitted to hot thermal shocks of 210 degrees C magnitude

  12. Fatigue Reliability under Random Loads

    DEFF Research Database (Denmark)

    Talreja, R.

    1979-01-01

    We consider the problem of estimating the probability of survival (non-failure) and the probability of safe operation (strength greater than a limiting value) of structures subjected to random loads. These probabilities are formulated in terms of the probability distributions of the loads...... propagation stage. The consequences of this behaviour on the fatigue reliability are discussed....

  13. Risk Based Optimal Fatigue Testing

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Faber, M.H.; Kroon, I.B.

    1992-01-01

    Optimal fatigue life testing of materials is considered. Based on minimization of the total expected costs of a mechanical component a strategy is suggested to determine the optimal stress range levels for which additional experiments are to be performed together with an optimal value...

  14. Fatigue of superalloys and intermetallics

    International Nuclear Information System (INIS)

    Stoloff, N.S.

    1993-01-01

    The fatigue behavior of intermetallic alloys and their composites is contrasted to that of nickel-base superalloys. The roles of microstructure and slip planarity are emphasized. Obstacles to use of intermetallics under cyclic loading conditions are described and future research directions are suggested

  15. Fatigue in the shipping industry

    NARCIS (Netherlands)

    Houtman, I.; Miedema, M.; Jettinghoff, K.; Starren, A.; Heinrich, J.; Gort, J.

    2005-01-01

    Fatigue is a 'reduction in physical and/or mental capacity as the result of physical, mental, or emotional exertion which may impair nearly all physical abilities including: strength, speed, reaction time, coordination, decision making or balance'. The literature is quite clear on the debilitating

  16. Fatigue and workload among Danish fishermen

    DEFF Research Database (Denmark)

    Remmen, Line Nørgaard; Herttua, Kimmo; Riss-Jepsen, Jørgen

    2017-01-01

    . Highest levels of fatigue were observed among fishermen at Danish seiners (mean 10.21), and fatigue scores decreased with more days at sea. However, none of these results were significant. Adjusted analyses showed that physical workload was significantly related to general fatigue (b = 0.20, 95% CI: 0...... was additionally significantly associated to the levels of physical and mental fatigue. Fishermen had a lower average score for all fatigue dimensions compared to those seen in general Danish working population. Prospective studies are required to assess whether the identified associations are causal....

  17. Fatigue and damage tolerance scatter models

    Science.gov (United States)

    Raikher, Veniamin L.

    1994-09-01

    Effective Total Fatigue Life and Crack Growth Scatter Models are proposed. The first of them is based on the power form of the Wohler curve, fatigue scatter dependence on mean life value, cycle stress ratio influence on fatigue scatter, and validated description of the mean stress influence on the mean fatigue life. The second uses in addition are fracture mechanics approach, assumption of initial damage existence, and Paris equation. Simple formulas are derived for configurations of models. A preliminary identification of the parameters of the models is fulfilled on the basis of experimental data. Some new and important results for fatigue and crack growth scatter characteristics are obtained.

  18. Variable amplitude fatigue, modelling and testing

    International Nuclear Information System (INIS)

    Svensson, Thomas.

    1993-01-01

    Problems related to metal fatigue modelling and testing are here treated in four different papers. In the first paper different views of the subject are summarised in a literature survey. In the second paper a new model for fatigue life is investigated. Experimental results are established which are promising for further development of the mode. In the third paper a method is presented that generates a stochastic process, suitable to fatigue testing. The process is designed in order to resemble certain fatigue related features in service life processes. In the fourth paper fatigue problems in transport vibrations are treated

  19. Approche historique des classifications en psychiatrie

    OpenAIRE

    Garrabé , J.

    2011-01-01

    Resume Des le milieu du xixe siecle s?est posee la question des criteres de classification des maladies. Pour les maladies mentales, diverses classifications ont alors ete proposees par des auteurs francais (Morel) et allemands (Kahlbaum, Kraepelin). A partir de la fin du xixe siecle, le Bureau International de Statistique (Paris) a publie a une Classification Internationale des Maladies, a revision decennale (J. Bertillon). Cette tache a ete poursuivie dans l?entre-deux-guerres pa...

  20. Complications du traitement traditionnel des fractures : aspects ...

    African Journals Online (AJOL)

    Tous les patients reçus avec des complications du traitement traditionnel des fractures ont été inclus dans ce travail. Le diagnostic des lésions était clinique et radiologique. Nous avions reçu 51 patients porteurs de complications suite à des traitements de médecine traditionnelle, soit 13,7% du total des patients hospitalisés ...

  1. Visual perception of fatigued lifting actions.

    Science.gov (United States)

    Fischer, Steven L; Albert, Wayne J; McGarry, Tim

    2012-12-01

    Fatigue-related changes in lifting kinematics may expose workers to undue injury risks. Early detection of accumulating fatigue offers the prospect of intervention strategies to mitigate such fatigue-related risks. In a first step towards this objective, this study investigated whether fatigue detection was accessible to visual perception and, if so, what was the key visual information required for successful fatigue discrimination. Eighteen participants were tasked with identifying fatigued lifts when viewing 24 trials presented using both video and point-light representations. Each trial comprised a pair of lifting actions containing a fresh and a fatigued lift from the same individual presented in counter-balanced sequence. Confidence intervals demonstrated that the frequency of correct responses for both sexes exceeded chance expectations (50%) for both video (68%±12%) and point-light representations (67%±10%), demonstrating that fatigued lifting kinematics are open to visual perception. There were no significant differences between sexes or viewing condition, the latter result indicating kinematic dynamics as providing sufficient information for successful fatigue discrimination. Moreover, results from single viewer investigation reported fatigue detection (75%) from point-light information describing only the kinematics of the box lifted. These preliminary findings may have important workplace applications if fatigue discrimination rates can be improved upon through future research. Copyright © 2012 Elsevier B.V. All rights reserved.

  2. Des cartes dans la classe…

    Directory of Open Access Journals (Sweden)

    R. Gimeno

    1990-09-01

    Full Text Available La majorité des enseignants qui veulent faire des cartes — et les faire réaliser aux élèves — pour répondre aux exigences des instructions officielles, doivent surmonter leur manque de compétences en cartographie et en didactique ainsi que les difficultés propres aux logiciels de cartographie encore peu performants. Ces compétences et la réflexion qui les accompagne sont pourtant accessibles aux enfants de l’école élémentaire…

  3. Microscopic local fatigue in PZT thin films

    International Nuclear Information System (INIS)

    Li, B S; Wu, A; Vilarinho, P M

    2007-01-01

    The reduction in switchable polarization during fatigue largely limits the application of PZT thin films in ferroelectric nonvolatile memories. So, it is very important to understand the fatigue mechanism in PZT films, especially at a nanoscale level. In this paper, nanoscale fatigue properties in PZT thin films have been studied by piezoresponse force microscopy and local piezoloops. It has been found that a piezoloop obtained on a fatigued point exhibits a much more pinched shape and a local imprint phenomenon is observed after severe fatigue. Furthermore, the domain structure evolves from a simple single-peak profile to a complex fluctuant one. However, there is only some shift of the piezoloop when a unipolar field with the same amplitude is applied on the film. The available experimental data show that there exist obvious domain wall pinning and injection of electrons into the film during fatigue. Finally, a schematic illustration is suggested to explain the possible fatigue mechanism

  4. Diversification des moyens de subsistance des petits producteurs de ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Cette subvention permettra à l'Institut international de recherche sur les cultures des zones tropicales ... In ROSSA's latest bulletin issue: A farewell message from Simon Carter, the Regional Director of the ... Cigarette Taxation in Tanzania.

  5. Researches on the electrolysis of metal oxides dissolved in boric anhydride or in melt borates. New methods of preparation of amorphous boron, borides and some metals; Recherches sur l'electrolyse des oxydes metalliques dissous dans l'anhydride borique ou dans les borates fondus. Nouvelles methodes de preparation du bore amorphe, des borures et de quelques metaux

    Energy Technology Data Exchange (ETDEWEB)

    Andrieux, Lucien

    1929-06-15

    This research thesis reports the investigation of the electrolysis of alkaline borates, alkaline earth borates and magnesium borate, and the investigation of mixtures containing a metal oxide dissolved in a bath formed by a tetraborate and a fluoride. The author more particularly studies the chemical products separated at the cathode level, i.e. boron (more or less pure), borates and other metals (zinc, tungsten, molybdenum)

  6. Heavy metals speciation in solid household waste incineration residues and contribution to the interpretation of volatilization processes; Speciation des metaux lourds dans les residus solides d'usines d'incineration d'ordures menageres et contribution a l'interpretation des processus de vaporisation

    Energy Technology Data Exchange (ETDEWEB)

    Gagnepain, B.

    1998-07-01

    Different types of solid residues of incineration plants have at first been analyzed by complementary techniques. Relative tendencies to the heavy metals speciation have been established. On the one hand, the chemical trapping of heavy metals by ashes as well as their respective mobilities have been characterized by the sequential extraction method. On the other hand, morphology of ashes, localization, repartition and chemical environment of heavy metals have been studied by X-ray microanalysis. It has been shown that Cd and Zn are highly leachable, Cr, Ni and Cu are trapped in ashes and Pb, As have intermediary behaviours with a slow mobility. Concentration gradients of heavy metals in terms of the ashes granulometry have been deduced. An experimental device for studying the vaporization of heavy metals in a fluidized bed (simulation of the heavy metals release during the incineration of household wastes) has been perfected. Experiments have been carried out in conditions (temperature, gaseous atmosphere, residence time) near those of the real processes. A model, coupling the mass and heat transfers with a thermodynamic anticipation of the heavy metals behaviour has been developed and has allowed to exploit these obtained results. (O.M.)

  7. L'exode des cerveaux et le renforcement des capacités en Afrique ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    1 févr. 2011 ... Ce phénomène ébranle les assises économiques et politiques de bien des pays africains. ... le défi consiste à recruter ces cerveaux. ... des missions africaines, des organisations non gouvernementales et des groupes de la diaspora réunis pour parler de l'exode des cerveaux en Afrique et des stratégies à ...

  8. The nature of self-regulatory fatigue and “ego depletion”: Lessons from physical fatigue

    Science.gov (United States)

    Evans, Daniel R.; Boggero, Ian A.; Segerstrom, Suzanne C.

    2016-01-01

    Self-regulation requires overriding a dominant response, and leads to temporary self-regulatory fatigue. Existing theories of the nature and causes of self-regulatory fatigue highlight physiological substrates such as glucose or psychological processes such as motivation, but these explanations are incomplete on their own. Historically, theories of physical fatigue demonstrate a similar pattern of useful but incomplete explanations, as recent views of physical fatigue emphasize the roles of both physiological and psychological factors. In addition to accounting for multiple inputs, these newer views also explain how fatigue can occur even in the presence of sufficient resources. Examining these newer theories of physical fatigue can serve as a foundation on which to build a more comprehensive understanding of self-regulatory fatigue that integrates possible neurobiological underpinnings of physical and self-regulatory fatigue, and suggests the possible function of self-regulatory fatigue. PMID:26228914

  9. The Nature of Self-Regulatory Fatigue and "Ego Depletion": Lessons From Physical Fatigue.

    Science.gov (United States)

    Evans, Daniel R; Boggero, Ian A; Segerstrom, Suzanne C

    2015-07-30

    Self-regulation requires overriding a dominant response and leads to temporary self-regulatory fatigue. Existing theories of the nature and causes of self-regulatory fatigue highlight physiological substrates such as glucose, or psychological processes such as motivation, but these explanations are incomplete on their own. Historically, theories of physical fatigue demonstrate a similar pattern of useful but incomplete explanations, as recent views of physical fatigue emphasize the roles of both physiological and psychological factors. In addition to accounting for multiple inputs, these newer views also explain how fatigue can occur even in the presence of sufficient resources. Examining these newer theories of physical fatigue can serve as a foundation on which to build a more comprehensive understanding of self-regulatory fatigue that integrates possible neurobiological underpinnings of physical and self-regulatory fatigue, and suggests the possible function of self-regulatory fatigue. © 2015 by the Society for Personality and Social Psychology, Inc.

  10. Evaluation des pratiques de gestion des adventices en riziculture ...

    African Journals Online (AJOL)

    Le riz est l'aliment principal pour la quasi-totalité des populations vivant en Côte d'Ivoire. Cependant, les adventices sont considérées comme la contrainte biologique la plus importante faisant obstacle à la production rizicole. L'objectif de cette étude menée en 2015 était d'évaluer différentes techniques de gestion des ...

  11. Cartographie des zones d'intervention des partenaires techniques et ...

    African Journals Online (AJOL)

    cartographier les zones d'intervention des partenaires techniques et financiers au Bénin. L'approche méthodologique utilisée a consisté à la recherche documentaire, à la collecte de données auprès des partenaires techniques et financiers et à l'analyse de ces données. Les résultats ont permis de constater que cent dix ...

  12. Modernisation des marchés agroalimentaires - inclusion des petits ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Les marchés agroalimentaires connaissent de rapides changements dans les pays en développement et les pays en transition. Sous l'influence de la libéralisation du commerce et des nouvelles technologies de transformation des aliments et de commerce de détail, les marchés agroalimentaires évoluent vers une plus ...

  13. Fatigue processes in thermoplastic fibres; Les mecanismes de fatigue dans les fibres thermoplastiques

    Energy Technology Data Exchange (ETDEWEB)

    Herrera Ramirez, J.M.

    2004-09-15

    The present study examines and compares the behaviour of the two types of PA66 fibres and two types of PET fibres under fatigue loading up to failure, and the correlation between the fibres (nano)structures and their structural heterogeneities, with fatigue lifetimes. Several techniques have been used to analyze the materials, such as scanning electron microscopy (SEM), microanalysis (EDS), differential scanning calorimetry (DSC), wide angle X-ray diffraction (WAXD) and micro-Raman spectroscopy. A meticulous analysis by scanning electron microscopy of the fracture morphology of fibres broken in tension and in fatigue, as well as a study of the fatigue life, were undertaken. The fatigue process occurs when the cyclic load amplitude is sufficiently large, however a condition for fatigue failure is that the minimum load each cycle must be lower than a threshold stress level. Failure under fatigue conditions leads to distinctive fracture morphologies which are very different from those seen after tensile or creep failure and this allows easy identification of the fatigue process. The fibres have been analyzed in the as received state and after fatigue failure in order to observe the microstructural changes resulting from the fatigue loading. The results will be compared with those obtained for fibres loaded under conditions where the fatigue process was hindered. The role of the microstructure of the fibres in determining fatigue will be discussed in this work and the possibility of improving their resistance to fatigue or eliminating the fatigue process will be discussed. (author)

  14. Characterization of the Effects of Fatigue on the Central Nervous System (CNS) and Drug Therapies

    National Research Council Canada - National Science Library

    Mery, Laura

    2007-01-01

    .... The model focused on central fatigue. Central fatigue associated with sleep disruption may precede peripheral fatigue, and therefore may predict impaired performance earlier than peripheral fatigue...

  15. Chronic Fatigue Syndrome (CFS) and Cancer Related Fatigue (CRF): two "fatigue" syndromes with overlapping symptoms and possibly related aetiologies.

    Science.gov (United States)

    Rovigatti, Ugo

    2012-12-01

    In July 2010, at the Muscle Fatigue Meeting, I presented an overview of Chronic Fatigue Syndrome and Cancer Related Fatigue, emphasizing a critical interpretation of the potential association between Chronic Fatigue Syndrome and Cancer Related Fatigue and a newly discovered retrovirus: Xenotropic Murine Related Virus. Since this association was hotly debated at that time, I suggested at the Meeting that it was wrong and most likely due to the identification of the wrong virus culprit. Today, 20 months after the Meeting, the first part of our prediction has turned out to be correct, as Xenotropic Murine Related Virus was shown to be a laboratory-created artefact. Still, the potential association of fatigue-syndromes with an infection (most likely viral) is sustained by a plethora of evidence and this overview will initially summarize data suggesting prior viral infection(s). The principal hypothesized mechanisms for both peripheral and central Chronic Fatigue Syndrome/Cancer Related Fatigue will be then summarized, also indicating plausible associations and triggering factors. All evidence accrued so far suggests that further research work should be performed in this interesting area and in order to identify an infectious agent for Chronic Fatigue Syndrome/Cancer Related Fatigue. One candidate RNA virus, Micro-Foci inducing Virus, will be described in this overview. Copyright © 2012 Elsevier B.V. All rights reserved.

  16. Die Versprachlichung des Sakralen

    DEFF Research Database (Denmark)

    Larsen, Øjvind

    2011-01-01

    transformation of the sacred as a harmonious theory of secularization. However, if we follow Weber in his religious-sociological considerations of modernity, we reach a tragic theory of secularization that poses the real problem that modernity’s connection to the sacred has been dissolved.......Habermas claims in connection with his development of the theory of communicative action that the sacred is transformed in a positive way and can take the form of free deliberation in society, the so-called Versprachlichung des Sakralen. The thesis is that the authority which could be found...... in religion and which is of fundamental significance for the integration of pre-modern societies is taken over by modern societies in forms of deliberation. Habermas develops his thesis in a discussion of Durkheim’s religious-sociological considerations. Habermas presents his thesis about the linguistic...

  17. Code des baux 2018

    CERN Document Server

    Vial-Pedroletti, Béatrice; Kendérian, Fabien; Chavance, Emmanuelle; Coutan-Lapalus, Christelle

    2017-01-01

    Le code des baux 2018 vous offre un contenu extrêmement pratique, fiable et à jour au 1er août 2017. Cette 16e édition intègre notamment : le décret du 27 juillet 2017 relatif à l’évolution de certains loyers dans le cadre d’une nouvelle location ou d’un renouvellement de bail, pris en application de l’article 18 de la loi n° 89-462 du 6 juillet 1989 ; la loi du 27 janvier 2017 relative à l’égalité et à la citoyenneté ; la loi du 9 décembre 2016 relative à la transparence, à la lutte contre la corruption et à la modernisation de la vie économique ; la loi du 18 novembre 2016 de modernisation de la justice du xxie siècle

  18. Crystal Dynamics from Neutron Spectrometry; Etude de la dynamique des cristaux par la spectrometrie neutronique; Izuchenie voprosov dinamiki kristallov metodami nejtronnoj spektrometrii; Estudio de la dinamica de redes cristalinas por espectrometria neutronica

    Energy Technology Data Exchange (ETDEWEB)

    Woods, A. D.B. [Atomic Energy of Canada Ltd., Chalk River, ON (Canada)

    1963-01-15

    This paper reviews investigations carried out at Chalk River on the lattice dynamics of various crystals including lead, sodium, alkali halides, semi-conductors, and other more complex compounds. Analysis of the low temperature results (-{approx}100{sup o}K) gives considerable insight into the nature of the interatomic forces. In sodium, a simple metal, the interatomic forces are very nearly derivable from a potential. Lead, a more complicated metal, has extremely long range forces accompanied by strong electronic effects. At higher temperatures anharmonic effects are very pronounced in both metals, especially in lead. The alkali halide results can be interpreted on a ''shell'' model, with polarizable ions. Even at low temperature neutron groups corresponding to the longitudinal optical modes. (author) [French] Dans ce memoire, l'auteur decrit les recherches faites a Chalk River sur la dynamique des reseaux de certains cristaux, y compris le plomb, le sodium, les halogenures alcalins, les semi-conducteurs et d'autres composes complexes. L'analyse des resultats obtenus a basse temperature (environ 100{sup o}K) fournit de nombreux renseignements sur la nature des forces interatomiques. Dans le sodium (metal simple), les forces interatomiques peuvent presque etre derivees d'un potentiel. Dans un metal plus complique, tel que le plomb, on trouve des forces ayant une portee extremement grande et comportant des effets electroniques marques. A des temperatures plus elevees, il se produit des effets anharmoniques tres prononces dans les deux metaux et particulierement dans le plomb. On peut interpreter les resultats obtenus pour les halogenures alcalins en se fondant sur le modele en couche comportant des ions polarisables. Meme aux basses temperatures, les groupes de neutrons correspondant aux modes optiques longitudinaux possedent des largeurs dependant de la temperature, que l'on ne comprend pas encore parfaitement. (author) [Spanish] Los autores pasan revista a las

  19. Digitalisierung des Kulturellen Erbes (Europas)

    NARCIS (Netherlands)

    Gruber, Marion

    2011-01-01

    Gruber, M. R. (2011, 13 December). Digitalisierung des Kulturellen Erbes (Europas). Guest lecture at the IPMZ - Institute of Mass Communication and Media Research, Devision Media Change & Innovation, University of Zurich, Switzerland.

  20. Etudes optiques de nouveaux materiaux laser: Des orthosilicates dopes a l'ytterbium: Le yttrium (lutetium,scandium) pentoxide de silicium

    Science.gov (United States)

    Denoyer, Aurelie

    La decouverte et l'elaboration de nouveaux materiaux laser solides suscitent beaucoup d'interet parmi la communaute scientifique. En particulier les lasers dans la gamme de frequence du micron debouchent sur beaucoup d'applications, en telecommunication, en medecine, dans le domaine militaire, pour la, decoupe des metaux (lasers de puissance), en optique non lineaire (doublage de frequence, bistabilite optique). Le plus couramment utilise actuellement est le Nd:YAG dans cette famille de laser, mais des remplacants plus performants sont toujours recherches. Les lasers a base d'Yb3+ possedent beaucoup d'avantages compares aux lasers Nd3+ du fait de leur structure electronique simple et de leur deterioration moins rapide. Parmi les matrices cristallines pouvant accueillir l'ytterbium, les orthosilicates Yb:Y 2SiO5, Yb:Lu2SiO5 et Yb:Sc2SiO 5 se positionnent tres bien, du fait de leur bonne conductivite thermique et du fort eclatement de leur champ cristallin necessaire a l'elaboration de lasers quasi-3 niveaux. De plus l'etude fine et systematique des proprietes microscopiques de nouveaux materiaux s'avere toujours tres interessante du point de vue de la recherche fondamentale, c'est ainsi que de nouveaux modeles sont concus (par exemple pour le champ cristallin) ou que de nouvelles proprietes inhabituelles sont decouvertes, menant a de nouvelles applications. Ainsi d'autres materiaux dopes a l'ytterbium sont connus pour leurs proprietes de couplage electron-phonon, de couplage magnetique, d'emission cooperative ou encore de bistabilite optique, mais ces proprietes n'ont encore jamais ete mises en evidence dans Yb:Y 2SiO5, Yb:Lu2SiO5 et Yb:Sc2SiO 5. Ainsi, cette these a pour but l'etude des proprietes optiques et des interactions microscopiques dans Yb:Y2SiO 5, Yb:Lu2SiO5 et Yb:Sc2SiO5. Nous utilisons principalement les techniques d'absorption IR et de spectroscopie Raman pour determiner les excitations du champ cristallin et les modes de vibration dans le materiau

  1. Assessment of early onset of driver fatigue using multimodal fatigue measures in a static simulator.

    Science.gov (United States)

    Jagannath, M; Balasubramanian, Venkatesh

    2014-07-01

    Driver fatigue is an important contributor to road accidents. This paper reports a study that evaluated driver fatigue using multimodal fatigue measures, i.e., surface electromyography (sEMG), electroencephalography (EEG), seat interface pressure, blood pressure, heart rate and oxygen saturation level. Twenty male participants volunteered in this study by performing 60 min of driving on a static simulator. Results from sEMG showed significant physical fatiguefatigue. This will help us understand the influence of physical and mental fatigue on driver during monotonous driving. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

  2. Vecteurs Singuliers des Theories des Champs Conformes Minimales

    Science.gov (United States)

    Benoit, Louis

    En 1984 Belavin, Polyakov et Zamolodchikov revolutionnent la theorie des champs en explicitant une nouvelle gamme de theories, les theories quantiques des champs bidimensionnelles invariantes sous les transformations conformes. L'algebre des transformations conformes de l'espace-temps presente une caracteristique remarquable: en deux dimensions elle possede un nombre infini de generateurs. Cette propriete impose de telles conditions aux fonctions de correlations qu'il est possible de les evaluer sans aucune approximation. Les champs des theories conformes appartiennent a des representations de plus haut poids de l'algebre de Virasoro, une extension centrale de l'algebre conforme du plan. Ces representations sont etiquetees par h, le poids conforme de leur vecteur de plus haut poids, et par la charge centrale c, le facteur de l'extension centrale, commune a toutes les representations d'une meme theorie. Les theories conformes minimales sont constituees d'un nombre fini de representations. Parmi celles-ci se trouvent des theories unitaires dont les representation forment la serie discrete de l'algebre de Virasoro; leur poids h a la forme h_{p,q}(m)=[ (p(m+1) -qm)^2-1] (4m(m+1)), ou p,q et m sont des entiers positifs et p+q= 2. Ces representations possedent un sous-espace invariant engendre par deux sous-representations avec h_1=h_{p,q} + pq et h_2=h_{p,q} + (m-p)(m+1-q) dont chacun des vecteurs de plus haut poids portent le nom de vecteur singulier et sont notes respectivement |Psi _{p,q}> et |Psi_{m-p,m+1-q}>. . Les theories super-conformes sont une version super-symetrique des theories conformes. Leurs champs appartiennent a des representation de plus haut poids de l'algebre de Neveu-Schwarz, une des deux extensions super -symetriques de l'algebre de Virasoro. Les theories super -conformes minimales possedent la meme structure que les theories conformes minimales. Les representations sont elements de la serie h_{p,q}= [ (p(m+2)-qm)^2-4] /(8m(m+2)) ou p,q et m sont

  3. Contribution to the study of the production and properties of finely divided solids, prepared in a flame reactor (1960); Contribution a l'etude de procedes d'obtention et des proprietes des solides finement divises elabores dans un reacteur a flamme (1960)

    Energy Technology Data Exchange (ETDEWEB)

    Cuer, J P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1960-04-15

    Sufficiently fine particles cannot be obtained by the grinding of crystals. It is therefore logical to adopt a method whereby the solid is formed from a compound in the vapour phase notable amongst such compounds, volatile at moderate temperatures, are certain organic derivatives of metals and the metallic halides. Formation of the solid from its gaseous derivative should be possible by hydrolysis or oxidation without the dispersion of the reaction medium being modified. The simplest method seems to be to obtain the reaction in an oxy-hydrogen blow-pipe. When the gases in the blow-pipe contain a volatile metallic compound, precipitation of finely divided solid in the form of oxide is produced in the flame at high temperature. Aluminium, titanium, iron and zirconium oxides and silica, the particles of which are spherical and very homogeneous in diameter, have been prepared in this way. The specific surfaces calculated from the diameters on electron microscope photographs are in agreement with those measured by adsorption of nitrogen at 195 deg. C. The oxides thus prepared are therefore not intensely porous. The properties and size of the oxide particles are studied as a function of various operational parameters, such as flame temperature and concentration of volatile metal derivative in the reactive gases. When the blow-pipe is supplied with oxide particles of small diameter, a very marked increase in size is observed. The properties of these preparations are also examined. (author) [French] Les procedes de broyage des cristaux ne conduisent pas a des particules suffisamment fines. Aussi, il est logique de s'adresser a un procede de formation du solide a partir d'un compose se trouvant en phase vapeur. De tels composes, volatils a des temperatures moderees, sont notamment certains derives organiques des metaux et les halogenures metalliques. La formation du solide a partir de son derive gazeux doit pouvoir etre effectuee par l'hydrolyse ou l'oxydation, sans que la

  4. Study on the effect of prior fatigue and creep-fatigue damage on the fatigue and creep characteristics of 316 FR stainless steel. 2nd report. The effect of prior creep-fatigue damage on the creep and fatigue characteristics

    International Nuclear Information System (INIS)

    Yamauchi, Masafumi; Chuman, Yasuharu; Otani, Tomomi; Takahashi, Yukio

    2001-01-01

    The effect of prior creep-fatigue damage on the creep and the fatigue characteristics was studied to investigate the creep-fatigue life evaluation procedure of 316FR stainless steel. Creep and fatigue tests were conducted at 550degC by using the specimen exposed to prior creep-fatigue cycles at the same temperature and interrupted at 1/4 Nf, 1/2 Nf and 3/4 Nf cycle. The creep and fatigue strength of the pre-damaged material showed monotonic reduction with the prior creep-fatigue damage compared with the virgin material. The creep ductility also showed monotonic reduction with the prior creep-fatigue damage. These results were evaluated by the stress-based Time Fraction Rule and the strain-based Ductility Exhaustion Method. The result showed that the application of the Ductility Exhaustion Method to the creep-fatigue damage evaluation is more promising than the Time Fraction Rule. (author)

  5. Extrusion and drawing of zircaloy 2. Production of pressure tubes for EL-4; Filage et etirage du zircaloy 2. Realisation des tubes de force pour EL-4

    Energy Technology Data Exchange (ETDEWEB)

    Thevenet, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Buffet, J [Cefilac (France)

    1964-07-01

    The authors give briefly the physical mechanical and chemical properties of zircaloy 2, as far as the transformation of this alloy is concerned. Extrusion: After a few general remarks concerning the extrusion and co-extrusion, including a comparison of the deformation resistance of canning metals and of zircaloy 2, the following points are considered: - the difficulties occurring because of the use of this alloy: - atmosphere protection - adjustment on to the machine tools - low thermal conductivity - economy of the metal (price) - the factors affecting the quality of the extruded products extrusion under a copper can and under lubricant glass - fine grain structure - temperature homogeneity - working temperature The transformation cycle - '550 kg ingot - preliminary shape 'for drawing of EL-4 tubes (112 x 120 L 12 m)' - is described in detail (extrusion or forging of the {phi} = 340 ingot into {phi} = 220 billets, cutting into lengths and hot drilling at {phi} = 125, fixing into a copper can and rough extrusion). Drawing: The main difficulties are due to seizing of the tools and to the necessity of protecting the alloy from the atmosphere during annealings. A brief description is given of drawing out on a short mandrel, on a long mandrel, of laminating on a reducing machine and of the carrying out of an annealing, as well as of the production of EL-4 tubes ({phi} =107 x 113 L 430 m) by drawing out shapes having a size of 112 x 120 on long mandrels. Conclusion: It is possible by extrusion and drawing to produce zircaloy 2 tubes similar to those which may be obtained normally using stainless steel. (authors) [French] Les auteurs donnent un resume succint des proprietes physiques mecaniques et chimiques du zircaloy 2 en ce qui concerne la transformation de cet alliage. Filage: Apres quelques generalites sur le filage et le cofilage, dont une comparaison entre les resistances a la deformation des metaux de gainage et du zircaloy 2, on etudie successivement: - les

  6. Fatigue Strength of Titanium Risers - Defect Sensitivity

    Energy Technology Data Exchange (ETDEWEB)

    Babalola, Olusegun Tunde

    2001-07-01

    This study is centred on assessment of the fatigue strength of titanium fusion welds for deep-water riser's applications. Deep-water risers are subjected to significant fatigue loading. Relevant fatigue data for titanium fusion welds are very scarce. Hence there is a need for fatigue data and life prediction models for such weldments. The study has covered three topics: Fatigue testing, Fractography and defect assessment, and Fracture Mechanics modelling of fatigue crack growth. Two series of welded grade of titanium consisting of 14 specimens in each series were fatigue tested under constant amplitude loading. Prior to fatigue testing, strain gauge measurements of some specimens was conducted to enable the definition of stress range in the fatigue assessment procedure. The results were compared with finite solid element analysis and related to fatigue stresses in a riser pipe wall. Distribution and geometry of internal and surface defects both in the as-welded and in the post-weld machined conditions were assessed using fractography. This served as a tool to determine the fatigue initiation point in the welds. Fracture mechanics was applied to model fatigue strength of titanium welds with initiation from weld defects. Two different stress intensity factor formulations for embedded eccentrically placed cracks were used for analysis of elliptical cracks with the major axis parallel and close to one of the free surfaces. The methods were combined to give a satisfactory model for crack growth analysis. The model analyses crack growth of elliptical and semi-elliptical cracks in two directions, with updating of the crack geometry. Fatigue strength assessment was conducted using two crack growth models, the Paris-Erdogan relation with no threshold and the Donahue et al. relation with an implied threshold. The model was validated against experimental data, with a discussion on the choice of crack growth model. (author)

  7. Fatigue in cancer: A review of literature

    Directory of Open Access Journals (Sweden)

    Vijayakumar Narayanan

    2009-01-01

    Full Text Available Fatigue is a common symptom of advanced cancer limiting one′s activity and affecting the quality of life. It is a multidimensional symptom complex with subjective and objective components. Hence, its definition and assessment seems arbitrary, incomplete, and elusive. Components of fatigue often merge with other ′disease states′ as anemia, depression and so on, compounding difficulty to assess it separately. Fatigue has a high prevalence rate, and lasts longer in chronic diseases like cancer. Its association with treatment modalities like chemotherapy, radiotherapy alongside the primary disease process makes it seemingly ubiquitous in many cases. Systemic manifestation of cancer causes excess demand on body resources on cell repair, uncontrolled growth with metabolite accumulation causing fatigue. Co-morbid conditions of organic and psychological nature causes fatigue. There are many assessment tools for fatigue with different uses and objectives, simple and reproducible tools like Brief Fatigue Inventory, Edmonton Symptom assessment scale seem feasible in everyday practice. Management of fatigue is not straightforward and rewarding. Although treatment of cause appears to be an attractive option, it is not possible in all cases. Therapeutic agents targeting cytokine load is in early stages of study and available results are not favorable. Specific measures aimed at pain relief, prevention/treatment of sepsis, management of depression, avoidance of drugs causing fatigue, restoring the metabolic profile are important. Methyl phenidate, megestrol, and modafinil are some drugs with promising effect to treat fatigue, though confirmatory studies are yet to be established. Non-pharmacological methods are also helpful. Forewarning patients on upcoming fatigue, active regular exercise, and stress management are some of them. Fatigue being a multidimensional entity, single mode of therapy is insufficient. Combined modality tailored to individual

  8. Mesoscopic scale thermal fatigue damage

    International Nuclear Information System (INIS)

    Robertson, C.; Fissolo, A.; Fivel, M.

    2001-01-01

    In an attempt to better understand damage accumulation mechanisms in thermal fatigue, dislocation substructures forming in 316L steel during one specific test were examined and simulated. Hence, thin foils taken out of massive, tested specimens were first observed in transmission electron microscopy (TEM). These observations help in determining one initial dislocation configuration to be implemented in a 3-D model combining 3D discrete dislocation dynamics simulation (DDD) and finite element method computations (FEM). It was found that the simulated mechanical behaviour of the DDD microstructure is compatible with FEM and experimental data. The numerically generated dislocation microstructure is similar to ladder-like dislocation arrangements as found in many fatigued f.c.c. materials. Distinct mechanical behaviour for the two active slip systems was shown and deformation mechanisms were proposed. (authors)

  9. Mesoscopic scale thermal fatigue damage

    Energy Technology Data Exchange (ETDEWEB)

    Robertson, C.; Fissolo, A. [CEA Saclay, Dept. des Materiaux pour le Nucleaire, DMN, 91 - Gif sur Yvette (France); Fivel, M. [Centre National de la Recherche Scientifique, CNRS-GPM2, 38 - Saint Martin d' Heres (France)

    2001-07-01

    In an attempt to better understand damage accumulation mechanisms in thermal fatigue, dislocation substructures forming in 316L steel during one specific test were examined and simulated. Hence, thin foils taken out of massive, tested specimens were first observed in transmission electron microscopy (TEM). These observations help in determining one initial dislocation configuration to be implemented in a 3-D model combining 3D discrete dislocation dynamics simulation (DDD) and finite element method computations (FEM). It was found that the simulated mechanical behaviour of the DDD microstructure is compatible with FEM and experimental data. The numerically generated dislocation microstructure is similar to ladder-like dislocation arrangements as found in many fatigued f.c.c. materials. Distinct mechanical behaviour for the two active slip systems was shown and deformation mechanisms were proposed. (authors)

  10. Creep-Fatigue Failure Diagnosis

    Science.gov (United States)

    Holdsworth, Stuart

    2015-01-01

    Failure diagnosis invariably involves consideration of both associated material condition and the results of a mechanical analysis of prior operating history. This Review focuses on these aspects with particular reference to creep-fatigue failure diagnosis. Creep-fatigue cracking can be due to a spectrum of loading conditions ranging from pure cyclic to mainly steady loading with infrequent off-load transients. These require a range of mechanical analysis approaches, a number of which are reviewed. The microstructural information revealing material condition can vary with alloy class. In practice, the detail of the consequent cracking mechanism(s) can be camouflaged by oxidation at high temperatures, although the presence of oxide on fracture surfaces can be used to date events leading to failure. Routine laboratory specimen post-test examination is strongly recommended to characterise the detail of deformation and damage accumulation under known and well-controlled loading conditions to improve the effectiveness and efficiency of failure diagnosis. PMID:28793676

  11. Multiaxial creep-fatigue rules

    International Nuclear Information System (INIS)

    Spindler, M.W.; Hales, R.; Ainsworth, R.A.

    1997-01-01

    Within the UK, a comprehensive procedure, called R5, is used to assess the high temperature response of structures. One part of R5 deals with creep-fatigue initiation, and in this paper we describe developments in this part of R5 to cover multiaxial stress states. To assess creep-fatigue, damage is written as the linear sum of fatigue and creep components. Fatigue is assessed using Miner's law with the total endurance split into initiation and growth cycles. Initiation is assessed by entering the curve of initiation cycles vs strain range using a Tresca equivalent strain range. Growth is assessed by entering the curve of growth cycles vs strain range using a Rankine equivalent strain range. The number of allowable cycles is obtained by summing the initiation and growth cycles. In this way the problem of defining an equivalent strain range applicable over a range of endurance is avoided. Creep damage is calculated using ductility exhaustion methods. In this paper we address two aspects; first, the nature of stress relaxation and, hence, accumulated creep strain in multiaxial stress fields; secondly, the effect of multiaxial stress on creep ductility. The effect of multiaxial stress state on creep ductility has been examined using experimental data and mechanistic models. Good agreement is demonstrated between an empirical description of test data and a cavity growth model, provided a simple nucleation criterion is included. A simple scaling factor is applied to uniaxial creep ductility, defined as a function of stress state. The factor is independent of the cavity growth mechanisms and yields a value of equivalent strain which can be conveniently used in determining creep damage by ductility exhaustion. (author). 14 refs, 4 figs

  12. Fatigue Management in Spaceflight Operations

    Science.gov (United States)

    Whitmire, Alexandra

    2011-01-01

    Sleep loss and fatigue remain an issue for crewmembers working on the International Space Station, and the ground crews who support them. Schedule shifts on the ISS are required for conducting mission operations. These shifts lead to tasks being performed during the biological night, and sleep scheduled during the biological day, for flight crews and the ground teams who support them. Other stressors have been recognized as hindering sleep in space; these include workload, thinking about upcoming tasks, environmental factors, and inadequate day/night cues. It is unknown if and how other factors such as microgravity, carbon dioxide levels, or increased radiation, may also play a part. Efforts are underway to standardize and provide care for crewmembers, ground controllers and other support personnel. Through collaborations between research and operations, evidenced-based clinical practice guidelines are being developed to equip flight surgeons with the tools and processes needed for treating circadian desynchrony (and subsequent sleep loss) caused by jet lag and shift work. The proper implementation of countermeasures such as schedules, lighting protocols, and cognitive behavioral education can hasten phase shifting, enhance sleep and optimize performance. This panel will focus on Fatigue Management in Spaceflight Operations. Speakers will present on research-based recommendations and technologies aimed at mitigating sleep loss, circadian desynchronization and fatigue on-orbit. Gaps in current mitigations and future recommendations will also be discussed.

  13. L'accumulation des métaux lourds au niveau des cultures : Cas des ...

    African Journals Online (AJOL)

    Le Bassin de Sebou présente une importance socio-économique pour le Maroc. En effet, il est sujet de diverses utilisations ; eau potable, eau d'irrigation et eau industrielle. Toutefois, ce bassin subit des pressions multiples, notamment par la pollution métallique. Considérant le risque de bioaccumulation des métaux par ...

  14. Monitoring and Managing Fatigue in Basketball

    Directory of Open Access Journals (Sweden)

    Toby Edwards

    2018-02-01

    Full Text Available The sport of basketball exposes athletes to frequent high intensity movements including sprinting, jumping, accelerations, decelerations and changes of direction during training and competition which can lead to acute and accumulated chronic fatigue. Fatigue may affect the ability of the athlete to perform over the course of a lengthy season. The ability of practitioners to quantify the workload and subsequent fatigue in basketball athletes in order to monitor and manage fatigue levels may be beneficial in maintaining high levels of performance and preventing unfavorable physical and physiological training adaptations. There is currently limited research quantifying training or competition workload outside of time motion analysis in basketball. In addition, systematic research investigating methods to monitor and manage athlete fatigue in basketball throughout a season is scarce. To effectively optimize and maintain peak training and playing performance throughout a basketball season, potential workload and fatigue monitoring strategies need to be discussed.

  15. Fatigue in tension perpendicular to the grain

    DEFF Research Database (Denmark)

    Clorius, Christian Odin; Pedersen, Martin Bo Uhre; Hoffmeyer, Preben

    1999-01-01

    Traditinally fatigue resistance is quantified as number of cycles to failure at a given stress level. A previous study by the authors showed that fatigue in compression parallel to the grain is governed partly by duration of load and partly by an effect of loading, i.e. a combination of a creep...... mechanism and a mechanism connected to damage introduce in the loading sequences. The purpose of the present study is to disentangle the effect of duration of load from the effect of load oscillation in fatigue in tension perpendicular to the grain. Fatigue experiments are made on small specimens...... and on dowel type joints with slotted in steel plates. In series of ten, the small specimens are taken to fatigue failure in uniform tension at square wave shaped load cycles at 0.01 Hz and 0.1 Hz. In order to test the predictive validity of the result from the small tension specimens, fatigue experiments...

  16. Fatigue In Tension Perpendicular to the Grain

    DEFF Research Database (Denmark)

    Clorius, Christian Odin; Pedersen, Martin Uhre; Hoffmeyer, Preben

    2004-01-01

    Traditionally fatigue resistance is quantified as number of cycles to failure at a given stress level. A previous study by the authors showed that fatigue in compression parallel to the grain is governed partly by duration of load and partly by an effect of loading, i.e. a combination of a creep...... mechanism and a mechanism connected to damage introduced in the loading sequences. The purpose of the present study is to disentangle the effect of duration of load from the effect of load oscillation in fatigue in tension perpendicular to the grain. Fatigue experiments are made on small specimens...... and on dowel type joints with slotted in steel plates. In series of ten, the small specimens are taken to fatigue failure in uniform tension at square wave shaped load cycles at 0.01 Hz and 0.1 Hz. In arder to test the predictive validity of the result from the small tension specimens, fatigue experiments...

  17. Noncontact fatigue crack evaluation using thermoelastic

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Ji Min; An, Yun Kyu; Sohn, Hoon [KAIST, Daejeon (Korea, Republic of)

    2012-12-15

    This paper proposes a noncontact thermography technique for fatigue crack evaluation under a cyclic tensile loading. The proposed technique identifies and localizes an invisible fatigue crack without scanning, thus making it possible to instantaneously evaluate an incipient fatigue crack. Based on a thermoelastic theory, a new fatigue crack evaluation algorithm is proposed for the fatigue crack tip localization. The performance of the proposed algorithm is experimentally validated. To achieve this, the cyclic tensile loading is applied to a dog bone shape aluminum specimen using a universal testing machine, and the corresponding thermal responses induced by thermoelastic effects are captured by an infrared camera. The test results confirm that the fatigue crack is well identified and localized by comparing with its microscopic images.

  18. Adults living with heart failure and fatigue

    DEFF Research Database (Denmark)

    Schjødt, Inge; Sommer, Irene; Bjerrum, Merete

    studies have been performed to develop more coherent and effective interventions to support self-care among heart failure patients experiencing fatigue. The findings of qualitative research should be synthesised to optimise nurses' understanding of fatigue and develop recommendations for practice. Aim......Background Fatigue is one of the most common symptoms reported by patients with heart failure (HF). Fatigue negatively impacts on patients’ everyday life, prognosis and quality of life. No specific cure or effective interventions to alleviate fatigue are available. Over the past decade, qualitative...... To synthesise the best available evidence related to the lived experiences and management of fatigue in everyday life in adult patients with stable heart failure to develop effective interventions to support self-care. Specific questions on the patients’ lived experiences included: • How do patients with HF...

  19. Design fatigue curve for Hastelloy-X

    International Nuclear Information System (INIS)

    Nishiguchi, Isoharu; Muto, Yasushi; Tsuji, Hirokazu

    1983-12-01

    In the design of components intended for elevated temperature service as the experimental Very High-Temperature gas-cooled Reactor (VHTR), it is essential to prevent fatigue failure and creep-fatigue failure. The evaluation method which uses design fatigue curves is adopted in the design rules. This report discussed several aspects of these design fatigue curves for Hastelloy-X (-XR) which is considered for use as a heat-resistant alloy in the VHTR. Examination of fatigue data gathered by a literature search including unpublished data showed that Brinkman's equation is suitable for the design curve of Hastelloy-X (-XR), where total strain range Δ epsilon sub(t) is used as independent variable and fatigue life Nsub(f) is transformed into log(log Nsub(f)). (author)

  20. Fatigue assessments in operating nuclear power plants

    International Nuclear Information System (INIS)

    Gosselin, S.R.; Deardorff, A.F.; Peltola, D.W.

    1994-01-01

    In November 1991, the ASME Section XI Task Group on Operating Plant Fatigue Assessment was formed to develop criteria and evaluation methodology for evaluating the effects of cyclic operation in operating nuclear power plants. The objective was to develop guidelines for inclusion in Section XI that could be used by plant operators in evaluating fatigue concerns and their impact on serviceability. This paper discusses the work performed by the Task Group. It explores the concept of ''Fatigue Design Basis'' versus ''Fatigue Operating Basis'' by examining the roles of ASME Section III and ASME Section XI in the design and operation of the nuclear power plants. Guidelines are summarized that may help plant operators perform effective design transient cycle evaluations and optimize cycle counting and fatigue usage tracking. The alternative fatigue evaluation approach using flaw tolerance is also introduced

  1. Fatigue management considering LWR coolant environments

    International Nuclear Information System (INIS)

    Park, Heung Bae; Jin, Tae eun

    2000-01-01

    Design fatigue curve for structural material in the ASME Boiler and Pressure Vessel Code do not explicitly address the effects of reactor coolant environments on fatigue life. Environmentally assisted cracking (EAC) of low-alloy steels in light water reactor (LWR) coolant environments has been a concern ever since the early 1970's. And, recent fatigue test data indicate a significant decrease in fatigue lives of carbon steels, low-alloy steels and austenitic stainless steels in LWR coolant environments. For these reasons, fatigue of major components has been identified as a technical issue remaining to be resolved for life management and license renewal of nuclear power plants. In the present paper, results of recent investigations by many organizations are reviewed to provide technical justification to support the development of utility approach regarding the management of fatigue considering LWR coolant environments for the purpose of life management and license renewal of nuclear power plants. (author)

  2. Low cycle fatigue of irradiated LMFBR materials

    International Nuclear Information System (INIS)

    Blackburn, L.D.

    1976-01-01

    A review of low cycle fatigue data on irradiated LMFBR materials was conducted and extensive graphical representations of available data are presented. Representative postirradiation tensile properties of annealed 304 and 316 SS are selected and employed in several predictive methods to estimate irradiated material fatigue curves. Experimental fatigue data confirm the use of predictive methods for establishing conservative design curves over the range of service conditions relevant to such CRBRP components as core former, fixed radial shielding, core barrel, lower inlet module and upper internals structures. New experimental data on fatigue curves and creep-fatigue interaction in irradiated 20 percent cold worked (CW) 316 SS and Alloy 718 would support the design of removable radial shielding and upper internals in CRBRP. New experimental information on notched fatigue behavior and cyclic stress-strain curves of all these materials in the irradiated condition could provide significant design data

  3. IEA Joint Action. Wind turbine fatigue

    Energy Technology Data Exchange (ETDEWEB)

    Maribo Pedersen, B [ed.

    1996-09-01

    Fatigue research on wind turbine blade material has been an important issue over the years in many countries and in the E.U. As a result of the effort the knowledge on fatigue properties of fibre reinforced materials has been expanded enormously. Practical fatigue design properties are available for constant amplitude tests at ambient temperatures. A lack of knowledge can be shown in several other fields, such as variable amplitude and multi-axial testing and the influence of the environment and carbon fibres. Fatigue is seen as dominant for the blade design, improvements in both the load prediction and material fatigue properties should be strove for. In discussions with blade manufacturers and subsidy agencies (E.U. DGXII, NOVEM, ETSU, etc.) on the importance of continuous materials fatigue research the improvement in reliability should be stressed. (au)

  4. Fatigue mechanisms during physical exercise

    Directory of Open Access Journals (Sweden)

    Monique Gevaerd

    2006-03-01

    Full Text Available Fatigue can be defined as incapacity to maintain the required power output, with concomitant impairment of exercise performance, and it can be divided into chronic or acute. In acute fatigue a subdivision has been used to delimitate experimental studies. Thus, acute fatigue can be central or peripheral. We began the review process with a search on the Pubmed database, followed by selection of classical and more recent articles. As the fatigue mechanisms are linked to the predominant energy metabolism in the activity, the purpose of this paper was to review the main acute fatigue theories in activities with different metabolic demands. From this literature review, it was possible to infer that important metabolic alterations occurring during exercise, impair normal cellular activities,therefore, decreasing the speed of contraction and as well as energy replenishment. Many of those alterations give information to the central nervous system, limiting the time length of exercise. Theoretically, the elongation of exercise beyond biological limits can cause irreversible damages to the organism. RESUMO Fadiga pode ser definida como uma incapacidade na manutenção de uma determinada potência, com conseqüente redução no desempenho, podendo ser considerada como crônica ou aguda. Na fadiga aguda, uma subdivisão vem sendo utilizada para maior delimitação dos estudos experimentais. Nesse sentido, fadiga aguda pode ser descrita como central ou periférica. Nós iniciamos o processo de revisão sobre o assunto com uma busca no banco de dados Pubmed, seguido da seleção dos artigos clássicos e mais recentes. Como os mecanismos de fadiga estão intimamente ligados ao metabolismo energético predominante da atividade, a presente revisão destinou-se a levantar as principais teorias sobre fadiga aguda em atividades com diferentes exigências metabólicas. A partir desse apanhado bibliográfico podemos inferir que importantes alterações metab

  5. Assessing Fatigue in Late-Midlife

    DEFF Research Database (Denmark)

    Fieo, Robert A; Mortensen, Erik Lykke; Lund, Rikke

    2014-01-01

    Previous methods examining the Multiple Fatigue Inventory-20 (MFI-20) fatigue questionnaire have been limited to classical test theory, for example, factor analytic approaches. We employed modern test theory to further strengthen the construct validity of the MFI-20 fatigue in a sample of healthy...... the interpretive power of the MFI-20, allowing for the identification of the most optimal scales. Poorly performing items were more easily identified, and person ability was assessed more accurately....

  6. Fatigue Fracture Behaviors of Transparent Polycarbonate Materials

    OpenAIRE

    ZHANG Xiao-wen; WU Nan; ZHANG Xuan; MA Li-ting; LI Lei

    2017-01-01

    The effect of the different stress ratios (R) and annealing treatment on the fatigue properties of the transparent polycarbonate (PC) sheet and the mechanism behind were studied, the fatigue crack propagation (FCP) process and mechanism were analyzed. The results show that after annealing, the residual stress of the PC samples decreases obviously and the fatigue properties are greatly improved. This is because the machining process results in tensile stress in the PC samples, eliminating the ...

  7. Fatigue in Breakwater Concrete Armour Units

    OpenAIRE

    Burcharth, Hans F.

    1984-01-01

    The reliability of rubble mound breakwaters depends on the hydraulic stability and the mechanical strength of the armour units. The paper deals with the important aspect of fatigue related to the strength of concrete armour units. Results showing significant fatigue from impact tests with Dolosse made of unreinforced and steel fibre reinforced flyash concrete are presented. Moreover universal graphs for fatigue in armour units made of conventional unreinforced concrete exposed to impact load ...

  8. Fatigue lifetime estimation of railway axles

    Czech Academy of Sciences Publication Activity Database

    Náhlík, Luboš; Pokorný, Pavel; Ševčík, Martin; Fajkoš, R.; Matušek, P.; Hutař, Pavel

    2017-01-01

    Roč. 73, MAR (2017), s. 139-157 ISSN 1350-6307 R&D Projects: GA MŠk LM2015069; GA MŠk(CZ) ED1.1.00/02.0068 Institutional support: RVO:68081723 Keywords : Residual fatigue lifetime * Railway axle * Variable amplitude loading * Fatigue crack propagation * Damage tolerance methodology Subject RIV: JL - Materials Fatigue, Friction Mechanics OBOR OECD: Audio engineering, reliability analysis Impact factor: 1.676, year: 2016

  9. Random non-proportional fatigue tests with planar tri-axial fatigue testing machine

    OpenAIRE

    Inoue, T.; Nagao, R.; Takeda, N.

    2016-01-01

    Complex stresses, which occur on the mechanical surfaces of transport machinery in service, bring a drastic degradation in fatigue life. However, it is hard to reproduce such complex stress states for evaluating the fatigue life with conventional multiaxial fatigue machines. We have developed a fatigue testing machine that enables reproduction of such complex stresses. The testing machine can reproduce arbitrary in-plane stress states by applying three independent loads to the test specimen u...

  10. Preparation and study of the nitrides and mixed carbide-nitrides of uranium and of plutonium; Preparation et etude des nitrures et carbonitrures d'uranium et de plutonium

    Energy Technology Data Exchange (ETDEWEB)

    Anselin, F [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1966-06-01

    A detailed description is given of a simple method for preparing uranium and plutonium nitrides by the direct action of nitrogen under pressure at moderate temperatures (about 400 C) on the partially hydrogenated bulk metal. It is shown that there is complete miscibility between the UN and PuN phases. The variations in the reticular parameters of the samples as a function of temperature and in the presence of oxide have been used to detect and evaluate the solubility of oxygen in the different phases. A study has been made of the sintering of these nitrides as a function of the preparation conditions with or without sintering additives. A favorable but non-reproducible, effect has been found for traces of oxide. The best results were obtained for pure UN at 1600 C (96 per cent theoretical density) on condition that a well defined powder, was used. The criterion used is the integral width of the X-ray diffraction lines. The compounds UN and PuN are completely miscible with the corresponding carbides. This makes it possible to prepare carbide-nitrides of the general formula (U,Pu) (C,N) by solid-phase diffusion, at around 1400 C. The sintering of these carbide-nitrides is similar to that of the carbides if the nitrogen content is low; in particular, nickel is an efficient sintering agent. For high contents, the sintering is similar to that of pure nitrides. (author) [French] On decrit en detail une methode simple de preparation des nitrures d'uranium et de plutonium par action directe de l'azote sous pression, a temperature moyenne (vers 400 C), sur les metaux massifs partiellement hydrures. On montre que la miscibilite est complete entre les phases UN et PuN. L'evolution des parametres reticulaires des echantillons en fonction de la temperature et en presence d'oxyde a ete utilisee pour detecter et estimer la solubilite de l'oxygene dans les diverses phases. On a etudie le frittage de ces nitrures en fonction des conditions de preparation, avec ou sans additif de

  11. Fatigue behaviour of synthetic nodular cast irons

    Directory of Open Access Journals (Sweden)

    A. Vaško

    2015-01-01

    Full Text Available The paper shows the influence of charge composition on microstructure, fatigue properties and failure micromechanisms of nodular cast irons. The additive of metallurgical silicon carbide (SiC in analysed specimens increases the content of ferrite in the matrix, decreases the size of graphite and increases the average count of graphitic nodules per unit of area. Consequently, the mechanical and fatigue properties of nodular cast iron are improved. The best fatigue properties (fatigue strength were reached in the melt which was created by 60 % of steel scrap and 40 % of pig iron in the basic charge with SiC additive.

  12. Research progress of exercise-induced fatigue

    Directory of Open Access Journals (Sweden)

    Peng-yi DAI

    2016-12-01

    Full Text Available Exercise-induced fatigue is a comprehensive response to a variety of physiological and biochemical changes in the body, and can affect people's quality of life to different extents. If no timely recovery after occurrence of fatigue, accumulated gradually, it can lead to "burnout", a "overtraining syndrome", "chronic fatigue syndrome", etc., which will cause endocrine disturbance, immune suppression, even physical illness. Exercise-induced fatigue becomes an important factor endangering human health. In recent years, many experts and scholars at home and abroad are committed to the research of exercise-induced fatigue, and have put forward a variety of hypothesis to explain the cause of exercise-induced fatigue. They expect to find out the methods for preventing and eliminating exercise-induced fatigue. This article discusses mainly the pathogenesis, model building, elimination/ relief, etc. of exercise-induced fatigue to point out the research achievements of exercise-induced fatigue and its existing problems. DOI: 10.11855/j.issn.0577-7402.2016.11.14

  13. Development of a fatigue analysis software system

    International Nuclear Information System (INIS)

    Choi, B. I.; Lee, H. J.; Han, S. W.; Kim, J. Y.; Hwang, K. H.; Kang, J. Y.

    2001-01-01

    A general purpose fatigue analysis software to predict fatigue lives of mechanical components and structures was developed. This software has some characteristic features including functions of searching weak regions on the free surface in order to reduce computing time significantly, a database of fatigue properties for various materials, and an expert system which can assist any users to get more proper results. This software can be used in the environment consists of commercial finite element packages. Using the software developed fatigue analyses for a SAE keyhole specimen and an automobile knuckle were carried out. It was observed that the results were agree well with those from commercial packages

  14. Fatigue and radiotherapy. A literature review

    International Nuclear Information System (INIS)

    Dilhuydy, J.M.; Ouhtatou, F.; Laporte, C.; Nguyen, T.V.F.; Vendrely, V.; Dilhuydy, J.M.; Dilhuydy, M.S.

    2001-01-01

    Fatigue is a common complaint for the cancer patient during and after radiotherapy, according to the published studies. Fatigue is a subjective symptom mostly underestimated by oncologists and other care givers. Etiology is complex, poorly understood in spite of obvious causes like insomnia, nausea, pain, depression, psychological distress, anemia, hypothyroidism, menopause disturbances, treatment adverse effects. Fatigue presents multi-factorial and multidimensional aspects. To evaluate it, many tools can be used as single-item, unidimensional and multidimensional instruments. Practically, the open discussion with the patient throughout radiotherapy is essential to define it. Taking charge fatigue requires its acknowledgement by radiotherapist, treatment of associated symptoms with a multidisciplinary approach. (authors)

  15. Fatigue in Breakwater Concrete Armour Units

    DEFF Research Database (Denmark)

    Burcharth, Hans F.

    1985-01-01

    The reliability of rubble mound breakwaters depends on the hydraulic stability and the mechanical strength of the armour units. The paper deals with the important aspect of fatigue related to the strength of concrete armour units. Results showing significant fatigue from impact tests with Dolosse...... made of unreinforced and steel fibre reinforced flyash concrete are presented. Moreover universal graphs for fatigue in armour units made of conventional unreinforced concrete exposed to impact load and pulsating load are presented. The effect of fibre reinforcement and the implementation of fatigue...

  16. Fatigue and creep-fatigue in sodium of 316 L stainless-steel

    International Nuclear Information System (INIS)

    Ardellier, A.

    1981-03-01

    The present paper describes test-facility developed to perform low-cycle fatigue and creep-fatigue interaction in sodium on stainless steel - 316 L . Fatigue life in sodium and in air are compared. A beneficial effect in sodium is noted

  17. The concept of fatigue fracture toughness in fatigue delamination growth behavior

    NARCIS (Netherlands)

    Yao, L.; Alderliesten, R.C.; Benedictus, R.

    2015-01-01

    This paper provides a study on mode I fatigue delamination growth in composite laminates using energy principles. Experimental data has been obtained from fatigue tests conducted on Double Cantilever Beam (DCB) specimens at various stress ratios. A concept of fatigue fracture toughness is proposed

  18. Fatigue and fatigue-related symptoms in patients treated for different causes of hypothyroidism

    NARCIS (Netherlands)

    Louwerens, M.; Appelhof, B.C.; Verloop, H.; Medici, M.; Peeters, R.P.; Visser, T.J.; Boelen, A.; Fliers, E.; Smit, J.W.A.; Dekkers, O.M.

    2012-01-01

    OBJECTIVE: Research on determinants of well-being in patients on thyroid hormone replacement therapy is warranted, as persistent fatigue-related complaints are common in this population. In this study, we evaluated the impact of different states of hypothyroidism on fatigue and fatigue-related

  19. Fatigue and fatigue-related symptoms in patients treated for different causes of hypothyroidism

    NARCIS (Netherlands)

    Louwerens, Marloes; Appelhof, Bente C.; Verloop, Herman; Medici, Marco; Peeters, Robin P.; Visser, Theo J.; Boelen, Anita; Fliers, Eric; Smit, Johannes W. A.; Dekkers, Olaf M.

    2012-01-01

    Objective: Research on determinants of well-being in patients on thyroid hormone replacement therapy is warranted, as persistent fatigue-related complaints are common in this population. In this study, we evaluated the impact of different states of hypothyroidism on fatigue and fatigue-related

  20. [Research Progress on the Interaction Effects and Its Neural Mechanisms between Physical Fatigue and Mental Fatigue].

    Science.gov (United States)

    Zhang, Lixin; Zhang, Chuncui; He, Feng; Zhao, Xin; Qi, Hongzhi; Wan, Baikun; Ming, Dong

    2015-10-01

    Fatigue is an exhaustion state caused by prolonged physical work and mental work, which can reduce working efficiency and even cause industrial accidents. Fatigue is a complex concept involving both physiological and psychological factors. Fatigue can cause a decline of concentration and work performance and induce chronic diseases. Prolonged fatigue may endanger life safety. In most of the scenarios, physical and mental workloads co-lead operator into fatigue state. Thus, it is very important to study the interaction influence and its neural mechanisms between physical and mental fatigues. This paper introduces recent progresses on the interaction effects and discusses some research challenges and future development directions. It is believed that mutual influence between physical fatigue and mental fatigue may occur in the central nervous system. Revealing the basal ganglia function and dopamine release may be important to explore the neural mechanisms between physical fatigue and mental fatigue. Future effort is to optimize fatigue models, to evaluate parameters and to explore the neural mechanisms so as to provide scientific basis and theoretical guidance for complex task designs and fatigue monitoring.

  1. Terre des hommes

    CERN Multimedia

    Staff Association

    2012-01-01

    Transformez votre téléphone portable en geste de solidarité ! Collecte du 12 au 23 novembre 2012   Faites un geste simple et utile en déposant vos téléphones portables inutilisés dans les urnes installées dans les trois restaurants du CERN. En Suisse, une personne change tous les 12 à 18 mois de téléphone portable. La plupart de nos vieux appareils sont simplement laissés à l’abandon avec comme seule fonction de parer une éventuelle panne à venir. On  estime ainsi que 8 millions de portables sont inutilisés, alors qu'entre 30 et 50% peuvent être réutilisés. L'action Solidarcomm leur offre une deuxième vie ! Terre des Hommes Suisse, dans le cadre de la campagne Solidarcomm, collecte et valorise vos téléphones inutilis&...

  2. Onlinespieler abseits des Mainstreams

    Directory of Open Access Journals (Sweden)

    Harald Baumgartlinger

    2012-12-01

    Full Text Available MMO(RPGs „Massively Multiplayer Online (Role-Playing Games“ nehmen einen Sonderstatus unter den Onlinespielen ein, welcher durch den wachsenden wirtschaftlichen Erfolg, insbesondere durch den „breakthrough hit“ (Duchenaut et al. 2006: 407 World of Warcraft (WoW, auch an Bedeutung für die Medien- und Kommunikationswissenschaft gewinnt (vgl. Inderst 2009: 15; vgl. Seifert/Jöckel 2008: 297. Der Primus des Genres, WoW, repräsentiert gemeinsam mit einigen nahezu identen Titeln insgesamt 85 Prozent der gespielten MMOGs (vgl. Williams et al. 2008: 999. Daher befasst sich auch die Mehrheit der vorliegenden Studien mit eben diesen Spielen. Neue Formen von MMO(Gs können jedoch zu ebenso neuartigen Spielerfahrungen führen und damit unterschiedliche Nutzungsmotive befriedigen (vgl. Seifert/Jöckel 2008: 309 und folglich zu einem gänzlich anderen Spielerleben führen. Während im Mainstream die kooperativen Spielerbeziehungen überwiegen, dominiert in Darkfall Online der soziale Wettbewerb. Der von Williams et al. 2008 verwendete Fragebogen diente als Rohling für die Kreation eines für die speziellen Anforderungen adaptierten Erhebungstools zur Erforschung der Spielertypologie und der Motive der Darkfall-Online-SpielerInnen. Die in der Onlinebefragung (N = 506 gesammelten Daten belegen, dass sich sowohl die Spielerdemographie, als auch die Motive der Spieler von den Mainstream MMOs unterscheiden. Zudem konnten realweltliche Eigenschaften der Spieler als signifikante Einflussfaktoren für die Spielzuwendung identifiziert werden.

  3. Gyrodactylidae et Gyrodactylose des Salmonidae

    Directory of Open Access Journals (Sweden)

    MALMBERG G.

    1993-01-01

    Full Text Available Vingt et une espèces de Gyrodactylus de Salmonidae arrangées en six groupes sont présentées. Les observations concernant ces espèces dans les milieux naturels et en pisciculture sont résumées. Sur la base de données générales relatives aux espèces de Gyrodactylus en milieu naturel en Scandinavie et Baltique, les observations biologiques, écologiques et comportementales de G. salaris Malmberg, 1957 et G. derjavini MALMBERG et MALMBERG (1987 des salmonidae sauvages des rivières norvégiennes et suédoises sont présentées. La viviparité unique, la reproduction asexuée et sexuée et le pouvoir de reproduction chez les Gyrodactylus sont développés. La Gyrodactylose à G. salaris est abordée en milieu naturel, dans les rivières norvégiennes et en pisciculture, en Suède et au Danemark. L'étude ultrastructurale des blessures causées par G. salaris ainsi que les résultats expérimentaux sur les espèces norvégiennes et canadiennes sont présentés. La distribution géographique naturelle des Salmonidae, les modifications liées à l'homme et à l'activité économique ainsi que les Salmonidae élevés sont revus. La présence de six groupes d'espèces de Gyrodactylus en Amérique du Nord et Eurasie est discutée en fonction de la distribution géographique des espèces hôtes. Il est souligné qu'une propagation intercontinentale des espèces de Gyrodactylus de Salmonidae a dû être impossible à cause de leur origine limnique d'une part et de la salinité élevée des océans atlantique et pacifique d'autre part. Les exigences micro et macro environnementales des espèces sont discutées dans les conditions naturelles et les variations saisonnières, préférendums et tolérances du parasitisme sont signalés. L'effet des conditions de pisciculture sur les espèces de Gyrocactylus sont discutées : la capacité reproductrice et de propagation ainsi que la spécificité — stricte dans la nature — peuvent être influenc

  4. Current algebra; Algebre des courants

    Energy Technology Data Exchange (ETDEWEB)

    Jacob, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1967-07-01

    The first three chapters of these lecture notes are devoted to generalities concerning current algebra. The weak currents are defined, and their main properties given (V-A hypothesis, conserved vector current, selection rules, partially conserved axial current,...). The SU (3) x SU (3) algebra of Gell-Mann is introduced, and the general properties of the non-leptonic weak Hamiltonian are discussed. Chapters 4 to 9 are devoted to some important applications of the algebra. First one proves the Adler- Weisberger formula, in two different ways, by either the infinite momentum frame, or the near-by singularities method. In the others chapters, the latter method is the only one used. The following topics are successively dealt with: semi leptonic decays of K mesons and hyperons, Kroll- Ruderman theorem, non leptonic decays of K mesons and hyperons ( {delta}I = 1/2 rule), low energy theorems concerning processes with emission (or absorption) of a pion or a photon, super-convergence sum rules, and finally, neutrino reactions. (author) [French] La premiere partie de ce cours (trois premiers chapitres), traite des generalites concernant l'algebre de courants. Apres une definition rapide des courants faibles et un rappel de leurs proprietes (hypothese V-A, conservation du courant vecteur, regles de selection, courant axial partiellement conserve,...), l'on introduit l'algebre de Gell-Mann SU (3) x SU (3), et discute les proprietes generales de l'Hamiltonien faible non leptonique. Les chapitres IV a IX sont consacres a des applications importantes de l'algebre des courants. En premier lieu l'on demontre la formule de Adler et Weisberger, par deux methodes differentes, celle dite du repere de moment infini et celle des singularites proches. Cette derniere est seule utilisee dans la suite. Puis, l'on traite successivement les problemes suivants: desintegrations semi-leptoniques des mesons K et des hyperons, theoreme de Kroll-Ruderman, desintegrations non leptoniques des mesons

  5. ETUDE DE LA DISTRIBUTION DES CATIONS ECHANGEABLES

    African Journals Online (AJOL)

    SEI Joseph

    pollution. L'objectif du présent travail est l'étude de la qualité des eaux superficielles et souterraines pour évaluer le degré de pollution provenant des lixiviats de la décharge et des cours d'eaux dans lesquels les ..... Les métaux lourds dosés ont montré une pollution métallique des eaux souterraine par rapport à la norme.

  6. ETUDE DE LA DISTRIBUTION DES CATIONS ECHANGEABLES

    African Journals Online (AJOL)

    SEI Joseph

    D'autre part, à cause de la corrélation directe entre l'étendue des inondations et les quantités de poissons et de pâturages fournies par la plaine, il y a eu dégradation des ... aux changements climatiques en zone sahélienne du Cameroun. Un des objectifs de notre étude était de préciser le comportement des agriculteurs ...

  7. Uncertainty on Fatigue Damage Accumulation for Composite Materials

    DEFF Research Database (Denmark)

    Toft, Henrik Stensgaard; Sørensen, John Dalsgaard

    2009-01-01

    In the present paper stochastic models for fatigue damage accumulation for composite materials are presented based on public available constant and variable amplitude fatigue tests. The methods used for estimating the SN-curve and accumulated fatigue damage are presented.......In the present paper stochastic models for fatigue damage accumulation for composite materials are presented based on public available constant and variable amplitude fatigue tests. The methods used for estimating the SN-curve and accumulated fatigue damage are presented....

  8. Architecture, des normes et des systèmes d'information libres, phase ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Architecture, des normes et des systèmes d'information libres, phase II (OASIS II) - Renforcement des capacités dans l'ensemble de l'Afrique. Sur presque tout le continent africain, la prestation des services de santé est limitée en raison des maigres ressources disponibles et de la charge de morbidité de plus en plus ...

  9. Prise en charge des urgences au service d'accueil des urgences ...

    African Journals Online (AJOL)

    Introduction: La prise en charge des patients dans les services d'accueil des urgences est une des meilleures vitrines d'un système de santé. En Afrique subsaharienne, la gestion des urgences se heurte à des difficultés humaines et matérielles. Le but de ce travail était d'évaluer les difficultés de prise en charge au Service ...

  10. High temperature creep-fatigue design

    International Nuclear Information System (INIS)

    Tavassoli, A. A. F.; Fournier, B.; Sauzay, M.

    2010-01-01

    Generation IV fission and future fusion reactors envisage development of more efficient high temperature concepts where materials performances are key to their success. This paper examines different types of high temperature creep-fatigue interactions and their implications on design rules for the structural materials retained in both programmes. More precisely, the paper examines current status of design rules for the stainless steel type 316L(N), the conventional Modified 9Cr-1Mo martensitic steel and the low activation Eurofer steel. Results obtained from extensive high temperature creep, fatigue and creep-fatigue tests performed on these materials and their welded joints are presented. These include sequential creep-fatigue and relaxation creep-fatigue tests with hold times in tension, in compression or in both. Effects of larger plastic deformations on fatigue properties are studied through cyclic creep tests or fatigue tests with extended hold time in creep. In most cases, mechanical test results are accompanied with microstructural and fractographic observations. In the case of martensitic steels, the effect of oxidation is examined by performing creep-fatigue tests on identical specimens in vacuum. Results obtained are analyzed and their implications on design allowable and creep-fatigue interaction diagrams are presented. While reasonable confidence is found in predicting creep-fatigue damage through existing code procedures for austenitic stainless steels, effects of cyclic softening and coarsening of microstructure of martensitic steels throughout the fatigue life on materials properties need to be taken into account for more precise damage calculations. In the long-term, development of ferritic/martensitic steels with stable microstructure, such as ODS steels, is proposed. (authors)

  11. High temperature creep-fatigue design

    Energy Technology Data Exchange (ETDEWEB)

    Tavassoli, A. A. F.; Fournier, B.; Sauzay, M. [CEA Saclay, DEN DMN, F-91191 Gif Sur Yvette (France)

    2010-07-01

    Generation IV fission and future fusion reactors envisage development of more efficient high temperature concepts where materials performances are key to their success. This paper examines different types of high temperature creep-fatigue interactions and their implications on design rules for the structural materials retained in both programmes. More precisely, the paper examines current status of design rules for the stainless steel type 316L(N), the conventional Modified 9Cr-1Mo martensitic steel and the low activation Eurofer steel. Results obtained from extensive high temperature creep, fatigue and creep-fatigue tests performed on these materials and their welded joints are presented. These include sequential creep-fatigue and relaxation creep-fatigue tests with hold times in tension, in compression or in both. Effects of larger plastic deformations on fatigue properties are studied through cyclic creep tests or fatigue tests with extended hold time in creep. In most cases, mechanical test results are accompanied with microstructural and fractographic observations. In the case of martensitic steels, the effect of oxidation is examined by performing creep-fatigue tests on identical specimens in vacuum. Results obtained are analyzed and their implications on design allowable and creep-fatigue interaction diagrams are presented. While reasonable confidence is found in predicting creep-fatigue damage through existing code procedures for austenitic stainless steels, effects of cyclic softening and coarsening of microstructure of martensitic steels throughout the fatigue life on materials properties need to be taken into account for more precise damage calculations. In the long-term, development of ferritic/martensitic steels with stable microstructure, such as ODS steels, is proposed. (authors)

  12. Evaluer des études de gestion des entreprises : combiner des éléments principales avec des éléments pratiques

    NARCIS (Netherlands)

    Pennink, B.J.W.

    2002-01-01

    Evaluer la recherche de gestion demande une combinaison des critères classiques et des critères pratiques. Par cette combinaison il est possible de trouver une réponse cerrecte concernant la validité et l'effet de la recherche. Dans cet article nous allons décrire comment une combinaison des

  13. Perceptions locales de la manifestation des changements ...

    African Journals Online (AJOL)

    SARAH

    . PRPR. ERMA. DC. UD cluster 1 cluster 2. Pauvres. Riches et moyens. Figure 4. Positionnement des classes d'impacts socio-économiques des changements climatiques dans un système d'axes de l'analyse factorielle des ...

  14. Migration transnationale des Vietnamiennes en Asie | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Souvent, cependant, les pays d'origine ne disposent pas des politiques ni des lois ayant force exécutoire qui permettraient d'assurer des pratiques d'embauche ... Women's movements in India are struggling to address problems arising from rapidly changing social relations and vulnerabilities associated with, among other ...

  15. Innovation, apprentissage et cadres institutionnels dans des ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Trois secteurs de transformation des ressources naturelles - ceux des pâtes et ... devrait déboucher sur des recommandations concrètes pour l'élaboration de ... bibliothèque de ressources aideront à améliorer les systèmes d'information et ...

  16. Coverage of multiaxial fatigue criteria in fatigue limit region

    Directory of Open Access Journals (Sweden)

    Papuga J.

    2007-11-01

    Full Text Available There is a power of methods aimed at calculation of equivalent fatigue limit for arbitrary multiaxial loading. Although there are so many ways of computation, their thorough mutual comparison in a larger scale is missing. The database project presented in this paper comprise of several databases crowned with the FatLim database, which comprise of a huge number of experimental results and of 18 computational method working in the category mentioned before. The great block of data was acquired using in-house fatigue software PragTic, which is offered as a freeware application. The FatLim database follows its philosophy of a simple and non-paid accessibility. Its query tool written in MySQL and PhP allows to users to evaluate a practical usability of tested methods on load cases, which the users define. All the issues covered within this paper are available on the website www.pragtic.com, structure of which is described here.

  17. Aux origines des Jeux olympiques.

    Directory of Open Access Journals (Sweden)

    Isabelle Debilly

    2005-11-01

    Full Text Available Si les Jo modernes sont régulièrement sous les feux de l’actualité, soit par la répétition temporelle des Olympiades elle-même, soit par les enjeux économiques féroces qui découlent du choix des lieux, ceux de l’Antiquité sont en général cantonnés au domaine scolaire ou universitaire. Néanmoins, ils bénéficient tous les quatre ans d`un éclairage médiatique. L’ouvrage Olympie. La victoire pour les dieux est au croisement des deux domaines. En effet, écrit par un ...

  18. Romagnat – Bois des Goules

    OpenAIRE

    Leguet, Daniel

    2014-01-01

    Lien Atlas (MCC) : http://atlas.patrimoines.culture.fr/atlas/trunk/index.php?ap_theme=DOM_2.01.02&ap_bbox=3.027;45.698;3.133;45.745 La parcelle prospectée se situe sur le flanc nord du col des Goules, passage traditionnel vers l’oppidum de Gergovie, dans un profond thalweg emprunté jadis par un chemin descendant sur Romagnat. Sur la pente actuelle entièrement boisée, on trouve des sentiers récents et des pistes de motocross. C’est sur l’une de ces dernières que nous avions recueilli un poids ...

  19. Fatigue Analysis of Large-scale Wind turbine

    Directory of Open Access Journals (Sweden)

    Zhu Yongli

    2017-01-01

    Full Text Available The paper does research on top flange fatigue damage of large-scale wind turbine generator. It establishes finite element model of top flange connection system with finite element analysis software MSC. Marc/Mentat, analyzes its fatigue strain, implements load simulation of flange fatigue working condition with Bladed software, acquires flange fatigue load spectrum with rain-flow counting method, finally, it realizes fatigue analysis of top flange with fatigue analysis software MSC. Fatigue and Palmgren-Miner linear cumulative damage theory. The analysis result indicates that its result provides new thinking for flange fatigue analysis of large-scale wind turbine generator, and possesses some practical engineering value.

  20. Cardiotoxicité des psychotropes

    OpenAIRE

    TAHIRI, Abdallah

    2013-01-01

    Même à dose thérapeutique, les médicaments psychotropes sont susceptibles d'engendrer des troubles du rythme cardiaque graves avec risque létal concourant à expliquer la pré valence de la mort subite dans la population psychiatrique. Les situations cliniques à risque telles que poly médication (des psychotropes entre eux ou d'un psychotrope avec un non psychotrope allongeur de QTc), interactions médicamenteuses aussi bien pharmacodynamiques que pharmacocinétiques, traitement pa...

  1. Fatigue Reliability under Multiple-Amplitude Loads

    DEFF Research Database (Denmark)

    Talreja, R.

    1979-01-01

    for the initial tensile strength and the fatigue life, the probability distributions for the residual tensile strength in both the crack initiation and the crack propagation stages of fatigue are determined. The method is illustrated for two-amplitude loads by means of experimental results obtained by testing...

  2. Common Mathematical Model of Fatigue Characteristics

    Directory of Open Access Journals (Sweden)

    Z. Maléř

    2004-01-01

    Full Text Available This paper presents a new common mathematical model which is able to describe fatigue characteristics in the whole necessary range by one equation only:log N = A(R + B(R ∙ log Sawhere A(R = AR2 + BR + C and B(R = DR2 + AR + F.This model was verified by five sets of fatigue data taken from the literature and by our own three additional original fatigue sets. The fatigue data usually described the region of N 104 to 3 x 106 and stress ratio of R = -2 to 0.5. In all these cases the proposed model described fatigue results with small scatter. Studying this model, following knowledge was obtained:– the parameter ”stress ratio R” was a good physical characteristic– the proposed model provided a good description of the eight collections of fatigue test results by one equation only– the scatter of the results through the whole scope is only a little greater than that round the individual S/N curve– using this model while testing may reduce the number of test samples and shorten the test time– as the proposed model represents a common form of the S/N curve, it may be used for processing uniform objective fatigue life results, which may enable mutual comparison of fatigue characteristics.

  3. Fatigue of coated and laser hardened steels

    International Nuclear Information System (INIS)

    La Cruz, P. de.

    1990-01-01

    In the present work the effect of ion nitriding, laser hardening and hot dip galvanizing upon the fatigue limit and notch sensitivity of a B-Mn Swedish steel SS 2131 have been investigated. The fatigue tests were performed in plane reverse bending fatigue (R=1). The quenched and tempered condition was taken as the reference condition. The microstructure, microhardness, fracture surface and coating appearance of the fatigue surface treated specimens were studied. Residual stress and retained austenite measurements were also carried out. It was found that ion nitriding improves the fatigue limit by 53 % for smooth specimens and by 115 % for notched specimens. Laser hardening improves the fatigue limit by 18 % and 56 % for smooth and notched specimen respectively. Hot dip galvanizing gives a slight deterioration of the fatigue limit (9 % and 10 % for smooth and notched specimen respectively). Ion nitriding and laser hardening decrease the value of the notch sensitivity factor q by 78 % and 65 % respectively. Hot dip galvanizing does not modify it. A simple schematic model based on a residual stress distribution, has been used to explain the different effects. It seems that the presence of the higher compressive residual stresses and the higher uniformity of the microstructure may be the causes of the better fatigue performance of ion nitrided specimens. (119 refs.) (author)

  4. Fatigue strength of socket welded pipe joint

    International Nuclear Information System (INIS)

    Iida, K.; Matsuda, F.; Sato, M.; Higuchi, M.; Nakagawa, A.

    1994-01-01

    Fully reversed four point bending fatigue tests were carried out of small diameter socket welded joints made of carbon steels. Experimental parameters are pipe diameter, thickness of pipe and socket wall, throat depth and shape of fillet welds, slip-on and diametral gaps in the socket welding, lack of penetration at the root of fillet welds, and peening of fillet welds. In most cases a fatigue crack started from the root of the fillet, but in the case of higher stress amplitude, it tended to start from the toe of fillet. The standard socket welded joint of 50 mm diameter showed relatively low fatigue strength, 46 MPa in stress amplitude at the 10 7 cycles failure life. This value corresponds to about 1/5 of that of the smoothed base metal specimens in axial fatigue. The fatigue strength showed decrease with increasing pipe diameter, and increase with increasing the thickness of pipe and socket wall. The effects of throat depth and shape of fillet welds on fatigue strength were not significant. Contrary to the expectation, the fatigue strength of the socket welded joint without slip-on gap is higher than that of the joint with the normal gap. A lack of penetration at the root deleteriously reduced fatigue strength, showing 14 MPa in stress amplitude at the 10 7 cycles failure life for the 50 mm diameter socket joint. (orig.)

  5. Fatigue tests of dowel-socket systems

    International Nuclear Information System (INIS)

    Chiang, D.D.

    1976-01-01

    A test program was conducted to determine the fatigue behavior of LHTGR fuel element dowel/socket systems. Two dowel/socket systems, namely, a four-dowel system and a five-dowel system, were tested to failure under shear loads applied through a fatigue test apparatus to simulate repetitive loading during a seismic event

  6. Myalgic Encephalomyelitis/Chronic Fatigue Syndrome: Diagnosis

    Science.gov (United States)

    ... Controls Search Form Controls Cancel Submit Myalgic Encephalomyelitis/Chronic Fatigue Syndrome Note: Javascript is disabled or is not supported ... Facebook Tweet Share Compartir To diagnose myalgic encephalomyelitis/chronic fatigue syndrome (ME/CFS), a patient’s doctor or healthcare provider ...

  7. Chronic Fatigue Syndrome: How Vulnerable Are Athletes?

    Science.gov (United States)

    Eichner, Edward R.

    1989-01-01

    Discusses chronic fatigue syndrome as it affects elite athletes, noting that overtraining may mimic it. In some cases, athletes who have it perform exceedingly well in the face of debilitating fatigue. Among athletes and nonathletes, the cause and the mind-body connection are areas of controversy and research. (Author/SM)

  8. High-speed Stochastic Fatigue Testing

    DEFF Research Database (Denmark)

    Brincker, Rune; Sørensen, John Dalsgaard

    1990-01-01

    Good stochastic fatigue tests are difficult to perform. One of the major reasons is that ordinary servohydraulic loading systems realize the prescribed load history accurately at very low testing speeds only. If the speeds used for constant amplitude testing are applied to stochastic fatigue...

  9. Standard guide for fretting fatigue testing

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2010-01-01

    1.1 This guide defines terminology and covers general requirements for conducting fretting fatigue tests and reporting the results. It describes the general types of fretting fatigue tests and provides some suggestions on developing and conducting fretting fatigue test programs. 1.2 Fretting fatigue tests are designed to determine the effects of mechanical and environmental parameters on the fretting fatigue behavior of metallic materials. This guide is not intended to establish preference of one apparatus or specimen design over others, but will establish guidelines for adherence in the design, calibration, and use of fretting fatigue apparatus and recommend the means to collect, record, and reporting of the data. 1.3 The number of cycles to form a fretting fatigue crack is dependent on both the material of the fatigue specimen and fretting pad, the geometry of contact between the two, and the method by which the loading and displacement are imposed. Similar to wear behavior of materials, it is important t...

  10. Fatigue Behavior of Inconel 718 TIG Welds

    Science.gov (United States)

    Alexopoulos, Nikolaos D.; Argyriou, Nikolaos; Stergiou, Vasillis; Kourkoulis, Stavros K.

    2014-08-01

    Mechanical behavior of reference and TIG-welded Inconel 718 specimens was examined in the present work. Tensile, constant amplitude fatigue, and fracture toughness tests were performed in ambient temperature for both, reference and welded specimens. Microstructure revealed the presence of coarse and fine-grained heat-affected zones. It has been shown that without any post-weld heat treatment, welded specimens maintained their tensile strength properties while their ductility decreased by more than 40%. It was found that the welded specimens had lower fatigue life and this decrease was a function of the applied fatigue maximum stress. A 30% fatigue life decrease was noticed in the high cycle fatigue regime for the welded specimens while this decrease exceeded 50% in the low cycle fatigue regime. Cyclic stress-strain curves showed that Inconel 718 experiences a short period of hardening followed by softening for all fatigue lives. Cyclic fatigue response of welded specimens' exhibited cyclically stable behavior. Finally, a marginal decrease was noticed in the Mode I fracture toughness of the welded specimens.

  11. 10 CFR 26.211 - Fatigue assessments.

    Science.gov (United States)

    2010-01-01

    ... licensee returns the individual to duty following a break of less than 10 hours in duration, the licensee... competently perform his or her duties for any part of a working tour because of fatigue, except if, following... 10 hours before the individual returns to duty; (3) Post-event. A fatigue assessment must be...

  12. Statistical treatment of fatigue test data

    International Nuclear Information System (INIS)

    Raske, D.T.

    1980-01-01

    This report discussed several aspects of fatigue data analysis in order to provide a basis for the development of statistically sound design curves. Included is a discussion on the choice of the dependent variable, the assumptions associated with least squares regression models, the variability of fatigue data, the treatment of data from suspended tests and outlying observations, and various strain-life relations

  13. Threshold Corrosion Fatigue of Welded Shipbuilding Steels.

    Science.gov (United States)

    1992-01-01

    8. J. C. Walter, E. Olbjorn, 0. Allstad and G. Elde, "Safety Against Corrosion Fatigue Offshore," Publication No. 94, Det Norske Ventas , Horik...Offshore. Publication No;. 94;, Det Norske Ventas , Horik, Norway, April 1976. 18. C. E. Jaske, D. Broek, J. E. Slater, W. E. Anderson. Corrosion Fatigue

  14. A critical evaluation on the fatigue problem

    International Nuclear Information System (INIS)

    Rosa, E. da; Costa Machado Leal, L. da

    1978-01-01

    A review of the different aspects of approaches to the fatigue problems since the Woehler curves till the crack propagation is presented. The interrelationship among each one of the aspects is then carried out as well as the relation of the aspects to the different fatigue phases, since the crack nucleation till the final rupture in an attempt to unify the design procedure. (Author)

  15. Fatigue and Depressive Symptoms in Older People

    DEFF Research Database (Denmark)

    Mänty, Minna; Rantanen, Taina; Era, Pertti

    2014-01-01

    Fatigue is considered an important indicator of aging-related declines in health and functional abilities. Previous studies have indicated strong associations between fatigue and depressive symptoms among younger populations and in patient groups with specific diseases. However, it is not known h...

  16. Tombes et cimetières éthiopiens : des rois, des saints, des anonymes1

    OpenAIRE

    Derat, Marie-Laure

    2009-01-01

    L’histoire des tombes et cimetières éthiopiens, dans la longue durée, en est encore à ses balbutiements. Si les tombes des saints et des rois nous sont un peu mieux connus grâce à des textes témoignant à la fois des enjeux entourant les sépultures de ces personnages hors du commun et des soins apportés à leur inhumation, en revanche, les cimetières ordinaires échappent encore largement à l’enquête, en grande partie parce que le commun des mortels est inhumé dans l’anonymat et dans un grand dé...

  17. Contribution a l'amelioration des techniques de diagnostic des ...

    African Journals Online (AJOL)

    Recurring fever is manifested by high fever with headache, vomiting, fatigue and feeling cold. These symptoms make recurring fever be confused either with malaria or with fever of unknown etiology. The purpose of this work is to make available to research laboratories in endemic areas of malaria and relapsing fever ...

  18. Work fatigue in urban bus drivers

    Directory of Open Access Journals (Sweden)

    Teresa Makowiec-Dąbrowska

    2015-10-01

    Full Text Available Background: Bus drivers are a special group of professional drivers who are at a very high risk of fatigue. The aim of the study was to examine whether the driver’s subjective assessment of fatigue allows for the determination of its level and identification of its causes. Material and Methods: The study group comprised 45 randomly selected bus drivers (mean age – 43.7±7.9 years, period of employment as drivers – 14.7±8.6 years. Examinations were performed in all subjects four times – before and after work on the “easy” route (outside the city center, small traffic intensity and before and after work on the “difficult” route (city center, heavy traffic. The fatigue test questionnaire, based on the list of symptoms of fatigue prepared by the Japan Research Committee of Fatigue, was used in the study. Results: The rating of fatigue after the work was significantly higher than that before the work. The profile of fatigue after work was not influenced by the type of route, but the assessment of most symptoms of fatigue reached a higher level after the “difficult” routes and the differences were statistically significant for 7 symptoms. Only the ratings of leg fatigue, feeling of heaviness, and the necessity to squint eyes and gaze with effort reached the higher levels after driving the “easy” routes. It has been found that the level of fatigue was significantly correlated with the job characteristics (driving time, the length of the route, number of stops, etc. and with the abundance of food ingested and type of beverage (coffee vs. others drunk prior to driving. Conclusions: The questionnaire used in our study to assess the subjective feeling of fatigue has proved to be a sensitive and useful tool for indicating the level and causes of fatigue. The relationship between the symptoms of fatigue and the characteristics of job and lifestyle shows that actions must be taken by both the employers and employees to prevent fatigue

  19. Traits morphologiques des graines et vigueur des jeunes plants de ...

    African Journals Online (AJOL)

    écologique du Sénégal afin de pouvoir sélectionner une meilleure semence qui sera destinée aux programmes de développement des énergies renouvelables. Morphological traits of seeds and seedling vigor of two sources of Jatropha curcas L. in ...

  20. Traits morphologiques des graines et vigueur des jeunes plants de ...

    African Journals Online (AJOL)

    SARAH

    écologique du Sénégal afin de pouvoir sélectionner une meilleure semence qui sera destinée aux programmes de développement des énergies renouvelables. Journal of Applied Biosciences 88:8249– 8255. ISSN 1997–5902 ...

  1. Original Paper Dynamique des peuplements des Parcelles d'Essais ...

    African Journals Online (AJOL)

    permanentes (PFTP) à Bensékou visait à évaluer la dynamique de la population de ... est alors important de mettre en œuvre une sensibilisation de la population locale sur les mérites de la gestion ..... contrôle des PES se sont encore montré.

  2. Evaluation des conditions de germination des noyaux de Grewia ...

    African Journals Online (AJOL)

    personnel

    31 janv. 2014 ... 1Laboratoire de Physiologie et Production Végétales, Université Marien NGOUABI,. Faculté des Sciences et Techniques, BP.69. Brazzaville, Republique du Congo. 2Ecole Nationale Supérieure d'Agronomie et Forestérie, Université Marien NGOUABI,. BP. 69. Brazzaville, Republique du Congo.

  3. Environmental fatigue in aluminum-lithium alloys

    Science.gov (United States)

    Piascik, Robert S.

    1992-01-01

    Aluminum-lithium alloys exhibit similar environmental fatigue crack growth characteristics compared to conventional 2000 series alloys and are more resistant to environmental fatigue compared to 7000 series alloys. The superior fatigue crack growth behavior of Al-Li alloys 2090, 2091, 8090, and 8091 is due to crack closure caused by tortuous crack path morphology and crack surface corrosion products. At high R and reduced closure, chemical environment effects are pronounced resulting in accelerated near threshold da/dN. The beneficial effects of crack closure are minimized for small cracks resulting in rapid growth rates. Limited data suggest that the 'chemically small crack' effect, observed in other alloy system, is not pronounced in Al-Li alloys. Modeling of environmental fatigue in Al-Li-Cu alloys related accelerated fatigue crack growth in moist air and salt water to hydrogen embrittlement.

  4. Fatigue strength ofcomposite wind turbine blade structures

    DEFF Research Database (Denmark)

    Ardila, Oscar Gerardo Castro

    Wind turbines are normally designed to withstand 20-30 years of life. During this period, the blades, which are the main rotating structures of a wind turbine, are subjected to high fluctuating load conditions as a result of a combination of gravity, inertia, and aeroelastic forces. For this reason......, fatigue is one of the foremost concerns during the design of these structures. However, current standard fatigue methods used for designing wind turbine blades seem not to be completely appropriate for these structures because they are still based on methods developed for metals and not for composite...... materials from which the blades are made. In this sense, the aim of this work is to develop more accurate and reliable fatigue-life prediction models for composite wind turbine blades. In this project, two types of fatigue models are implemented: fatigue-life models and damage mechanics models. In the first...

  5. A Review on Fatigue Driving Detection

    Directory of Open Access Journals (Sweden)

    Shi Sheng-Yang

    2017-01-01

    Full Text Available The socialization of automobile development has brought great convenience to people’s travel. However, the rapid increase in the number of vehicles has also caused a series of problems. The increase in traffic accidents has brought great social casualties and economic losses. Fatigue driving, which is an important factor in the traffic accident, has aroused people’s attention. This paper reviews all kinds of fatigue driving detection methods at present; compares various fatigue driving detection methods in terms of accuracy, real-time and cost; analyses the advantages and disadvantages of various methods; introduces the application of fatigue detection system in automobile; summarizes the current deficiencies and future development trends in the field of fatigue driving detection. The future research of this field will be more to the data fusion, computer vision and deep learning.

  6. Fatigue in adults with traumatic brain injury

    DEFF Research Database (Denmark)

    Mollayeva, Tatyana; Kendzerska, Tetyana; Mollayeva, Shirin

    2013-01-01

    BACKGROUND: Despite strong indications that fatigue is the most common and debilitating symptom after traumatic brain injury, little is known about its frequency, natural history, or relation to other factors. The current protocol outlines a strategy for a systematic review that will identify......, assess, and critically appraise studies that assessed predictors for fatigue and the consequences of fatigue on at least two separate time points following traumatic brain injury. METHODS/DESIGN: MEDLINE, EMBASE, the Cochrane Database of Systematic Reviews, CINAHL, and PsycINFO will be systematically...... searched for relevant peer-reviewed studies. Reference lists of eligible papers will also be searched. All English language studies with a longitudinal design that focus on fatigue in adults with primary-impact traumatic brain injury will be included. Studies on fatigue following brain injury due...

  7. Interconnect fatigue design for terrestrial photovoltaic modules

    Science.gov (United States)

    Mon, G. R.; Moore, D. M.; Ross, R. G., Jr.

    1982-03-01

    The results of comprehensive investigation of interconnect fatigue that has led to the definition of useful reliability-design and life-prediction algorithms are presented. Experimental data indicate that the classical strain-cycle (fatigue) curve for the interconnect material is a good model of mean interconnect fatigue performance, but it fails to account for the broad statistical scatter, which is critical to reliability prediction. To fill this shortcoming the classical fatigue curve is combined with experimental cumulative interconnect failure rate data to yield statistical fatigue curves (having failure probability as a parameter) which enable (1) the prediction of cumulative interconnect failures during the design life of an array field, and (2) the unambiguous--ie., quantitative--interpretation of data from field-service qualification (accelerated thermal cycling) tests. Optimal interconnect cost-reliability design algorithms are derived based on minimizing the cost of energy over the design life of the array field.

  8. High cycle fatigue properties of inconel 690

    International Nuclear Information System (INIS)

    Lee, Young Ho; Lee, Byong Whi; Kim, In Sup; Park, Chi Yong

    1997-01-01

    Inconel 690 is presently used as sleeve material and a replacement alloy in degraded steam generators, as well as the material for new steam generators. But Inconel 690 has low thermal conductivity which are 3-8% less than that of Inconel 600 at operating temperature. For the same power output, conduction area must be increased. As a result, more fluid induced vibration can cause a fatigue damage of Inconel 690. High cycle fatigue ruptures occurred in the U-bend regions of North Anna Unit 1 and Mihama Unit 2 steam generators. At this study, the effect of temperature on fatigue crack growth rate in Inconel 690 steam generator tube was investigated at various temperature in air environment. With increasing temperature, fatigue crack growth rate increased and grain size effect decreased. Chromium carbides which have large size and semi-continuous distribution in the grain boundaries decreased fatigue crack growth rate

  9. Fatigue in Steel Structures under Random Loading

    DEFF Research Database (Denmark)

    Agerskov, Henning

    1999-01-01

    types of welded plate test specimens and full-scale offshore tubular joints. The materials that have been used are either conventional structural steel with a yield stress of ~ 360-410 MPa or high-strength steel with a yield stress of ~ 810-1010 MPa. The fatigue tests and the fracture mechanics analyses......Fatigue damage accumulation in steel structures under random loading is studied. The fatigue life of welded joints has been determined both experimentally and from a fracture mechanics analysis. In the experimental part of the investigation, fatigue test series have been carried through on various...... have been carried out using load histories, which are realistic in relation to the types of structures studied, i.e. primarily bridges, offshore structures and chimneys. In general, the test series carried through show a significant difference between constant amplitude and variable amplitude fatigue...

  10. Parallel monostrand stay cable bending fatigue

    DEFF Research Database (Denmark)

    Winkler, Jan Pawel

    This dissertation investigates the bending fatigue response of high-strength steel monostrands and multistrand stay cables to cyclic transverse deformations. Increasing bridge stock numbers and a push for longer cable-supported span lengths have led to an increased number of reported incidents...... of damage and replacement of bridge stay cables due to wind and traffic-induced fatigue. The understanding of fatigue mechanisms in most steel structures is well established. However, in the case of cables composed of steel strands, many important aspects related with bending fatigue remain to be clarified...... associated with variable loading, and different testing procedures. As most of the contemporary stay cables are comprised of a number of individual highstrength steel monostrands, the research study started with an extensive experimental work on the fatigue response of a single monostrand to cyclic flexural...

  11. Assessment of muscle fatigue using electromygraphm sensing

    Science.gov (United States)

    Helmi, Muhammad Hazimin Bin; Ping, Chew Sue; Ishak, Nur Elliza Binti; Saad, Mohd Alimi Bin Mohd; Mokhtar, Anis Shahida Niza Binti

    2017-08-01

    Muscle fatigue is condition of muscle decline in ability after undergoing any physical activity. Observation of the muscle condition of an athlete during training is crucial to prevent or minimize injury and able to achieve optimum performance in actual competition. The aim of this project is to develop a muscle monitoring system to detect muscle fatigue in swimming athlete. This device is capable to measure muscle stress level of the swimmer and at the same time provide indication of muscle fatigue level to trainer. Electromyography signal was recorded from the muscle movement while practicing the front crawl stroke repetitively. The time domain data was processed to frequency spectra in order to study the effect of muscle fatigue. The results show that the recorded EMG signal is able to sense muscle fatigue.

  12. On the Fatigue Analysis of Wind Turbines

    Energy Technology Data Exchange (ETDEWEB)

    Sutherland, Herbert J.

    1999-06-01

    Modern wind turbines are fatigue critical machines that are typically used to produce electrical power from the wind. Operational experiences with these large rotating machines indicated that their components (primarily blades and blade joints) were failing at unexpectedly high rates, which led the wind turbine community to develop fatigue analysis capabilities for wind turbines. Our ability to analyze the fatigue behavior of wind turbine components has matured to the point that the prediction of service lifetime is becoming an essential part of the design process. In this review paper, I summarize the technology and describe the ''best practices'' for the fatigue analysis of a wind turbine component. The paper focuses on U.S. technology, but cites European references that provide important insights into the fatigue analysis of wind turbines.

  13. Shock Transmission and Fatigue in Human Running.

    Science.gov (United States)

    Verbitsky, Oleg; Mizrahi, Joseph; Voloshin, Arkady; Treiger, July; Isakov, Eli

    1998-08-01

    The goal of this research was to analyze the effects of fatigue on the shock waves generated by foot strike. Twenty-two subjects were instrumented with an externally attached, lightweight accelerometer placed over the tibial tuberosity. The subjects ran on a treadmill for 30 min at a speed near their anaerobic threshold. Fatigue was established when the end-tidal CO 2 pressure decreased. The results indicated that approximately half of the subjects reached the fatigue state toward the end of the test. Whenever fatigue occurred, the peak acceleration was found to increase. It was thus concluded that there is a clear association between fatigue and increased heel strike-induced shock waves. These results have a significant implication for the etiology of running injuries, since shock wave attenuation has been previously reported to play an important role in preventing such injuries.

  14. RMS fatigue curves for random vibrations

    International Nuclear Information System (INIS)

    Brenneman, B.; Talley, J.G.

    1984-01-01

    Fatigue usage factors for deterministic or constant amplitude vibration stresses may be calculated with well known procedures and fatigue curves given in the ASME Boiler and Pressure Vessel Code. However, some phenomena produce nondeterministic cyclic stresses which can only be described and analyzed with statistical concepts and methods. Such stresses may be caused by turbulent fluid flow over a structure. Previous methods for solving this statistical fatigue problem are often difficult to use and may yield inaccurate results. Two such methods examined herein are Crandall's method and the ''3sigma'' method. The objective of this paper is to provide a method for creating ''RMS fatigue curves'' which accurately incorporate the requisite statistical information. These curves are given and may be used by analysts with the same ease and in the same manner as the ASME fatigue curves

  15. Fatigue cracking in road pavement

    Science.gov (United States)

    Mackiewicz, P.

    2018-05-01

    The article presents the problem of modelling fatigue phenomena occurring in the road pavement. The example of two selected pavements shows the changes occurring under the influence of the load in different places of the pavement layers. Attention is paid to various values of longitudinal and transverse strains generated at the moment of passing the wheel on the pavement. It was found that the key element in the crack propagation analysis is the method of transferring the load to the pavement by the tire and the strain distribution in the pavement. During the passage of the wheel in the lower layers of the pavement, a complex stress state arises. Then vertical, horizontal and tangent stresses with various values appear. The numerical analyses carried out with the use of finite element methods allowed to assess the strain and stress changes occurring in the process of cracking road pavement. It has been shown that low-thickness pavements are susceptible to fatigue cracks arising "bottom to top", while pavements thicker are susceptible to "top to bottom" cracks. The analysis of the type of stress allowed to determine the cracking mechanism.

  16. Fatigue Characteristics of Selected Light Metal Alloys

    Directory of Open Access Journals (Sweden)

    Cieśla M.

    2016-03-01

    Full Text Available The paper addresses results of fatigue testing of light metal alloys used in the automotive as well as aerospace and aviation industries, among others. The material subject to testing comprised hot-worked rods made of the AZ31 alloy, the Ti-6Al-4V two-phase titanium alloy and the 2017A (T451 aluminium alloy. Both low- and high-cycle fatigue tests were conducted at room temperature on the cycle asymmetry ratio of R=-1. The low-cycle fatigue tests were performed using the MTS-810 machine on two levels of total strain, i.e.Δεc= 1.0% and 1.2%. The high-cycle fatigue tests, on the other hand, were performed using a machine from VEB Werkstoffprufmaschinen-Leipzig under conditions of rotary bending. Based on the results thus obtained, one could develop fatigue life characteristics of the materials examined (expressed as the number of cycles until failure of sample Nf as well as characteristics of cyclic material strain σa=f(N under the conditions of low-cycle fatigue testing. The Ti-6Al-4V titanium alloy was found to be characterised by the highest value of fatigue life Nf, both in lowand high-cycle tests. The lowest fatigue life, on the other hand, was established for the aluminium alloys examined. Under the high-cycle fatigue tests, the life of the 2017A aluminium and the AZ31 magnesium alloy studied was determined by the value of stress amplitude σa. With the stress exceeding 150 MPa, it was the aluminium alloy which displayed higher fatigue life, whereas the magnesium alloy proved better on lower stress.

  17. Temperament vs. chronic fatigue in police officers

    Directory of Open Access Journals (Sweden)

    Ewa Stępka

    2015-12-01

    Full Text Available Background: Chronic fatigue is a problem affecting a still growing number of people. Among them there are representatives of different professions who are forced to cope not only with occupational stress, but also with the problem of fatigue. The police is one of such occupational groups, in which exposure to stressful and often traumatic situations, contact with those who violate the law, shift work and contact with superiors can play a key role in the development of chronic fatigue. However, chronic fatigue, induced by the above mentioned factors, does not affect all police officers since its occurrence also depends on many personal traits, including temperament. Material and methods: We studied a group of 61 police officers of the Kuyavian-Pomeranian garrison. The study was conducted using the Buss and Plomin EAS (emotionality, activity, sociability Temperament Questionnaire, CIS-20R (community, innovation, survey Questionnaire, developed by Vercoulen et al. and a questionnaire on socio-demographic data. Results: The results indicated the relationship between chronic fatigue and emotionality. Statistical analyses showed a negative correlation between the nature of emotional components, distress, fear, anger, and the general rate of chronic fatigue. There was no statistically significant correlation between age, and service experience and the level of chronic fatigue. Conclusions: The results indicate that the officers of the study group show dramatically high levels of chronic fatigue. The results also revealed that temperament characteristics, such as sociability and activity, reported in the literature as factors reducing fatigue and stress, did not show relevance to chronic fatigue in the study group. Med Pr 2015;66(6:793–801

  18. Assessment of surgeon fatigue by surgical simulators

    Directory of Open Access Journals (Sweden)

    Tuwairqi K

    2015-04-01

    Full Text Available Khaled Tuwairqi,1 Jessica H Selter,2 Shameema Sikder3 1College of Medicine, University of Utah, Salt Lake City, UT, 2Johns Hopkins School of Medicine, 3Wilmer Eye Institute, Johns Hopkins University, Baltimore, MD, USA Background: The impact of fatigue on surgical performance and its implications for patient care is a growing concern. While investigators have employed a number of different tools to measure the effect of fatigue on surgical performance, the use of the surgical simulator has been increasingly implemented for this purpose. The goal of this paper is to review the published literature to achieve a better understanding of evaluation of fatigue on performance as studied with surgical simulators. Methods: A PubMed and Cochrane search was conducted using the search terms “simulator”, “surgery”, and “fatigue”. In total, 50 papers were evaluated, and 20 studies were selected after application of exclusion criteria. Articles were excluded if they did not use the simulator to assess the impact of fatigue on surgeon performance. Systematic reviews and case reports were also excluded. Results: Surgeon fatigue led to a consistent decline in cognitive function in six studies. Technical skills were evaluated in 18 studies, and a detrimental impact was reported in nine studies, while the remaining nine studies showed either no change or positive results with regard to surgical skills after experience of fatigue. Two pharmacological intervention studies reversed the detrimental impact of fatigue on cognitive function, but no change or a worsening effect was recognized for technical skills. Conclusion: Simulators are increasingly being used to evaluate the impact of fatigue on the surgeon's performance. With regard to the impact of fatigue in this regard, studies have demonstrated a consistent decline in cognitive function and mixed outcomes for technical skills. Larger studies that relate the simulator's results to real surgical

  19. Fatigue diminishes motoneuronal excitability during cycling exercise.

    Science.gov (United States)

    Weavil, Joshua C; Sidhu, Simranjit K; Mangum, Tyler S; Richardson, Russell S; Amann, Markus

    2016-10-01

    Exercise-induced fatigue influences the excitability of the motor pathway during single-joint isometric contractions. This study sought to investigate the influence of fatigue on corticospinal excitability during cycling exercise. Eight men performed fatiguing constant-load (80% W peak ; 241 ± 13 W) cycling to exhaustion during which the percent increase in quadriceps electromyography (ΔEMG; vastus lateralis and rectus femoris) was quantified. During a separate trial, subjects performed two brief (∼45 s) nonfatiguing cycling bouts (244 ± 15 and 331 ± 23W) individually chosen to match the ΔEMG across bouts to that observed during fatiguing cycling. Corticospinal excitability during exercise was quantified by transcranial magnetic, electric transmastoid, and femoral nerve stimulation to elicit motor-evoked potentials (MEP), cervicomedullary evoked potentials (CMEP), and M waves in the quadriceps. Peripheral and central fatigue were expressed as pre- to postexercise reductions in quadriceps twitch force (ΔQ tw ) and voluntary quadriceps activation (ΔVA). Whereas nonfatiguing cycling caused no measureable fatigue, fatiguing cycling resulted in significant peripheral (ΔQ tw : 42 ± 6%) and central (ΔVA: 4 ± 1%) fatigue. During nonfatiguing cycling, the area of MEPs and CMEPs, normalized to M waves, similarly increased in the quadriceps (∼40%; P fatiguing cycling. As a consequence, the ratio of MEP to CMEP was unchanged during both trials (P > 0.5). Therefore, although increases in muscle activation promote corticospinal excitability via motoneuronal facilitation during nonfatiguing cycling, this effect is abolished during fatigue. We conclude that the unaltered excitability of the corticospinal pathway from start of intense cycling exercise to exhaustion is, in part, determined by inhibitory influences on spinal motoneurons obscuring the facilitating effects of muscle activation.

  20. La maison des mathématiques

    CERN Document Server

    Villani, Cédric; Moncorgé, Vincent

    2014-01-01

    Comment travaillent les mathématiciens ? C'est peut-être en se promenant dans les couloirs de la première des " maisons des mathématiques " de France, l'institut Henri Poincaré, que l'on trouvera quelques réponses. Le mathématicien Cédric Villani et le physicien Jean-Philippe Uzan nous invitent à découvrir cette discipline et ses acteurs. Au fil des pages on suit, à travers de superbes images signées du photographe Vincent Moncorgé, la façon dont se fabrique cette science qui reste souvent mystérieuse. Toutes les dimensions, scientifique, esthétique et poétique, des mathématiques sont convoquées grâce à des regards croisés : la diversité des inspirations des chercheurs, la source de leur créativité, l'imaginaire littéraire et artistique des mathématiques, la drôle de tribu des mathématiciens. Un voyage au cœur de cette " auberge espagnole " des mathématiques, campus " à la française " accueillant des centaines de chercheurs du monde entier, devenu un lieu d'émulation et d'éc...

  1. Etude des erreurs d'estimation des populations par la méthode des captures successives (DeLURY, 2 captures et des captures-recaptures (PETERSEN

    Directory of Open Access Journals (Sweden)

    LAURENT M.

    1978-01-01

    Full Text Available L'estimation des populations naturelles par capture-recapture et par captures successives est souvent entachée d'erreur car, dans de nombreux cas, l'hypothèse fondamentale d'égalité des probabilités de captures pour tous les individus dans le temps et dans l'espace n'est pas respectée. Dans le cas des populations de poissons envisagés ici, les captures ont lieu par la pêche électrique. On a pu chiffrer l'ordre de grandeur des erreurs systématiques faites sur l'estimation des peuplements, en fonction des conditions particulières, biotiques et abiotiques, des différents milieux inventoriés.

  2. Reduction des effectifs ou licenciements

    CERN Multimedia

    Maiani, Luciano

    2002-01-01

    "Vous faites un amalgame entre la reduction en cours des effectifs du CERN (organisation europeenne pour la recherche nucleaire) et les economies que le laboratoire doit realiser dans les cinq ans a venir pour financer le projet de grand collisionneur de hadrons (Le Monde du 4 septembre)" (1/2 page).

  3. Les parcs des porcelainiers Haviland

    Directory of Open Access Journals (Sweden)

    Colette Chabrely

    2012-04-01

    Full Text Available Les parcs du Reynou et de Mont-Méry en Limousin, anciennes propriétés des porcelainiers Haviland, présentent l’un et l’autre un grand intérêt paysager et botanique. Dans les deux cas, l’attribution de la création est incertaine. Cet article propose pour le Reynou une analyse de documents figurés anciens permettant de préciser la chronologie des travaux du château et du parc. Pour Mont-Méry il s’agit de poser de nouveaux jalons pour une étude plus approfondie des sources et de la composition des jardins afin d’envisager de nouvelles pistes pour leur attribution.The Reynou and Mont-Méry parks near Limoges originally belonged to the city’s porcelain manufacturers, the Havilands. Both parks are of considerable interest in terms of their landscaping and their botany. In both cases, there is some uncertainty as to the identity of their designers. This article offers an analysis of the graphic representations of the Reynou park, clarifying the chronology of the creation of the château and its park. For the Mont-Méry park, the aim is to offer some guidelines for further research in the source material and on the design of the park itself, perhaps allowing for the designer to be identified.

  4. Bangalore, ville des nouvelles technologies

    Directory of Open Access Journals (Sweden)

    Clarisse Didelon

    2003-06-01

    Full Text Available Bangalore est devenue la Silicon Valley de l’Inde. Une partie de ses habitants y vit à l’occidentale mais le reste de la population souffre de la croissance spectaculaire de la ville. Face à l’insuffisance des infrastructures, Bangalore devient de moins en moins attractive pour les entreprises internationales.

  5. Random non-proportional fatigue tests with planar tri-axial fatigue testing machine

    Directory of Open Access Journals (Sweden)

    T. Inoue

    2016-10-01

    Full Text Available Complex stresses, which occur on the mechanical surfaces of transport machinery in service, bring a drastic degradation in fatigue life. However, it is hard to reproduce such complex stress states for evaluating the fatigue life with conventional multiaxial fatigue machines. We have developed a fatigue testing machine that enables reproduction of such complex stresses. The testing machine can reproduce arbitrary in-plane stress states by applying three independent loads to the test specimen using actuators which apply loads in the 0, 45, and 90 degree directions. The reproduction was tested with complex stress data obtained from the actual operation of transport machinery. As a result, it was found that the reproduced stress corresponded to the measured stress with an error range of less than 10 %. Then, we made a comparison between measured fatigue lives under random non-proportional loading conditions and predicted fatigue lives. It was found that predicted fatigue lives with cr, stress on critical plane, were over a factor of 10 against measured fatigue lives. On the other hand, predicted fatigue lives with ma, stress in consideration of a non-proportional level evaluated by using amplitude and direction of principal stress, were within a factor of 3 against measured fatigue lives

  6. Stress management skills, neuroimmune processes and fatigue levels in persons with chronic fatigue syndrome.

    Science.gov (United States)

    Lattie, Emily G; Antoni, Michael H; Fletcher, Mary Ann; Penedo, Frank; Czaja, Sara; Lopez, Corina; Perdomo, Dolores; Sala, Andreina; Nair, Sankaran; Fu, Shih Hua; Klimas, Nancy

    2012-08-01

    Stressors and emotional distress responses impact chronic fatigue syndrome (CFS) symptoms, including fatigue. Having better stress management skills might mitigate fatigue by decreasing emotional distress. Because CFS patients comprise a heterogeneous population, we hypothesized that the role of stress management skills in decreasing fatigue may be most pronounced in the subgroup manifesting the greatest neuroimmune dysfunction. In total, 117 individuals with CFS provided blood and saliva samples, and self-report measures of emotional distress, perceived stress management skills (PSMS), and fatigue. Plasma interleukin-1-beta (IL-1β, IL-2, IL-6, IL-10, and tumor necrosis factor-alpha (TNF-α), and diurnal salivary cortisol were analyzed. We examined relations among PSMS, emotional distress, and fatigue in CFS patients who did and did not evidence neuroimmune abnormalities. Having greater PSMS related to less fatigue (p=.019) and emotional distress (pfatigue levels most strongly in CFS patients in the top tercile of IL-6, and emotional distress mediated the relationship between PSMS and fatigue most strongly in patients with the greatest circulating levels of IL-6 and a greater inflammatory (IL-6):anti-inflammatory (IL-10) cytokine ratio. CFS patients having greater PSMS show less emotional distress and fatigue, and the influence of stress management skills on distress and fatigue appear greatest among patients who have elevated IL-6 levels. These findings support the need for research examining the impact of stress management interventions in subgroups of CFS patients showing neuroimmune dysfunction. Copyright © 2012 Elsevier Inc. All rights reserved.

  7. Mediators of the effects on fatigue of pragmatic rehabilitation for chronic fatigue syndrome.

    Science.gov (United States)

    Wearden, Alison J; Emsley, Richard

    2013-10-01

    To examine potential mediators of the effect of pragmatic rehabilitation on improvements in fatigue following a randomized controlled trial for patients with chronic fatigue syndrome (CFS/ME) in primary care (IRCTN 74156610). Patients fulfilled the Oxford criteria for CFS. Ninety-five patients were randomized to pragmatic rehabilitation and 100 to general practitioner (GP) treatment as usual. The outcome was the Chalder fatigue scale score (0123 scoring) at end of treatment (20 weeks) and 1-year follow up (70 weeks). First, the effect of treatment on potential mediators was assessed. Then fatigue was regressed on significant mediators, treatment allocation, and baseline measures of fatigue and significant mediators. Reduction in limiting activities at 20 weeks mediated the positive effect of pragmatic rehabilitation on fatigue at 70 weeks (mediated effect size = -2.64, SE = 0.81, p = .001, proportion of effect mediated = 82.0%). Reduction in catastrophizing at 20 weeks mediated the positive effect of pragmatic rehabilitation on fatigue at 70 weeks (mediated effect size = -1.39, SE = 0.61, p = .023, proportion of effect mediated = 43.2%). Reductions in 70-week measures of fear avoidance, embarrassment avoidance, limiting activities, and all-or-nothing behavior all mediated improvement in fatigue at 70 weeks, although the causal direction of these cross-sectional effects cannot be determined. There were no between-group differences on measures of exercise capacity (a timed step test). Improvements in fatigue following pragmatic rehabilitation are related to changes in behavioral responses to and beliefs about fatigue.

  8. Cumulative fatigue and creep-fatigue damage at 3500C on recrystallized zircaloy 4

    International Nuclear Information System (INIS)

    Brun, G.; Pelchat, J.; Floze, J.C.; Galimberti, M.

    1985-06-01

    An experimental programme undertaken by C.E.A., E.D.F. and FRAGEMA with the aim of characterizing the fatigue and creep fatigue behaviour of zircaloy-4 following annealing treatments (recrystallized, stress-delived) is in progress. The results given below concern only recrystallized material. Cyclic properties, low-cycle fatigue curves and creep behaviour laws under stresses have been established. Sequential tests of pure fatigue and creep-fatigue were performed. The cumulative life fractions at fracture depend on the sequence of leading, stress history and number of cycles of prestressing. The MINER's rule appears to be conservative with regard to a low-high loading sequence whereas it is not for the reverse high-low loading sequences. Fatigue and creep damage are not interchangeable. Pre-creep improves the fatigue resistance. Pre-fatigue improves the creep strength as long as the beneficial effect of cyclic hardening overcomes the damaging effect of surface cracking. The introduction of a tension hold time into the fatigue cycle slightly increases cyclic hardening and reduces the number of cycles to failure. For hold times of less than one hour, the sum of fatigue and creep life fractions is closed to one

  9. Évaluation de la valeur nutritive et recherche des substances ...

    African Journals Online (AJOL)

    SARAH

    30 juin 2016 ... et des lipides. Puis, l'évaluation a été effectuée sur ces échantillons pour rechercher la présence des alcaloïdes, des saponines, des quinones, des stéroïdes, des terpenoïdes, des flavonoïdes, des leucoanthocyanes, des tannoïdes et des hétérosides cyanogénétiques. Les teneurs moyennes en humidité ...

  10. Predictors and Trajectories of Morning Fatigue Are Distinct from Evening Fatigue

    Science.gov (United States)

    Wright, Fay; Melkus, Gail D’Eramo; Hammer, Marilyn; Schmidt, Brian L.; Knobf, M. Tish; Paul, Steven M.; Cartwright, Frances; Mastick, Judy; Cooper, Bruce A.; Chen, Lee-May; Melisko, Michelle; Levine, Jon D.; Kober, Kord; Aouizerat, Bradley E.; Miaskowski, Christine

    2015-01-01

    Context Fatigue is the most common symptom in oncology patients during chemotherapy (CTX). Little is known about the predictors of interindividual variability in initial levels and trajectories of morning fatigue severity in these patients. Objectives An evaluation was done to determine which demographic, clinical, and symptom characteristics were associated with initial levels as well as the trajectories of morning fatigue and to compare findings with our companion paper on evening fatigue. Methods A sample of outpatients with breast, gastrointestinal, gynecological, and lung cancer (N=586) completed demographic and symptom questionnaires a total of six times over two cycles of CTX. Fatigue severity was evaluated using the Lee Fatigue Scale. Hierarchical linear modeling (HLM) was used to answer the study objectives. Results A large amount of interindividual variability was found in the morning fatigue trajectories. A piecewise model fit the data best. Patients with higher body mass index (BMI), who did not exercise regularly, with a lower functional status, and who had higher levels of state anxiety, sleep disturbance and depressive symptoms, reported higher levels of morning fatigue at enrollment. Variations in the trajectories of morning fatigue were predicted by the patients’ ethnicity and younger age. Conclusion The modifiable risk factors that were associated with only morning fatigue were BMI, exercise, and state anxiety. Modifiable risk factors that were associated with both morning and evening fatigue included functional status, depressive symptoms, and sleep disturbance. Using this information, clinicians can identify patients at higher risk for more severe morning fatigue and evening fatigue, provide individualized patient education, and tailor interventions to address the modifiable risk factors. PMID:25828559

  11. Osteoporose und Genetik des Knochenstoffwechsels

    Directory of Open Access Journals (Sweden)

    Obermayer-Pietsch B

    2002-01-01

    Full Text Available Osteoporose ist in hohem Maß genetisch determiniert. Neue Wege der molekularbiologischen Forschung haben sich in den letzten Jahren auf diesem Gebiet etabliert. "Gene mapping" mit polymorphen genetischen Markern auf der Suche nach Phänotyp-assoziierten Genen ist ein aufwendiges, aber vielversprechendes Verfahren und wird durch die Erkenntnisse des Human Genome Projects beschleunigt. So wurde jüngst u. a. das Low-density Lipoprotein 5-Gen als wichtig für den Knochenstoffwechsel identifiziert. Kandidaten-gene wie Hormonrezeptor-, Cytokin- oder Kollagen-Gene werden hinsichtlich ihrer Gen-Gen- und Gen-Umwelt- Interaktionen untersucht und erlauben neue funktionelle Einsichten in Erkrankungen des Knochenstoffwechsels. Mutationen der Kollagen-Gene sind bei einigen seltenen Erkrankungen, wie dem Osteoporose-Pseudogliom-Syndrom oder der Osteogenesis imperfecta gefunden worden, könnten aber auch für häufige Varianten von Bindegewebsstörungen wie der congenitalen Hüftdysplasie verantwortlich sein, die etwa 10 % der weiblichen kaukasischen Bevölkerung in unterschiedlichem Ausmaß betrifft. Osteoporose am Schenkelhals und erhöhte Gelenkslaxizität sowie andere generalisierte Veränderungen des Knochen- und Kollagenstoffwechsels können hier möglicherweise ebenfalls durch Störungen des Kollagen I alpha 1-Gens erklärt werden. In Summe können wir zahlreiche neue Einsichten in die Pathophysiologie des Skelettsystems erwarten, die uns auch neue Zugangswege für Diagnostik und Therapie unserer Patienten ermöglichen werden.

  12. L'astronomie des Anciens

    Science.gov (United States)

    Nazé, Yaël

    2009-04-01

    Quelle que soit la civilisation à laquelle il appartient, l'être humain cherche dans le ciel des réponses aux questions qu'il se pose sur son origine, son avenir et sa finalité. Le premier mérite de ce livre est de nous rappeler que l'astronomie a commencé ainsi à travers les mythes célestes imaginés par les Anciens pour expliquer l'ordre du monde et la place qu'ils y occupaient. Mais les savoirs astronomiques passés étaient loin d'être négligeables et certainement pas limités aux seuls travaux des Grecs : c'est ce que l'auteur montre à travers une passionnante enquête, de Stonehenge à Gizeh en passant par Pékin et Mexico, fondée sur l'étude des monuments anciens et des sources écrites encore accessibles. Les tablettes mésopotamiennes, les annales chinoises, les chroniques médiévales, etc. sont en outre d'une singulière utilité pour les astronomes modernes : comment sinon remonter aux variations de la durée du jour au cours des siècles, ou percer la nature de l'explosion qui a frappé tant d'observateurs en 1054 ? Ce livre offre un voyage magnifiquement illustré à travers les âges, entre astronomie et archéologie.

  13. A randomized controlled trial of qigong exercise on fatigue symptoms, functioning, and telomerase activity in persons with chronic fatigue or chronic fatigue syndrome.

    Science.gov (United States)

    Ho, Rainbow T H; Chan, Jessie S M; Wang, Chong-Wen; Lau, Benson W M; So, Kwok Fai; Yuen, Li Ping; Sham, Jonathan S T; Chan, Cecilia L W

    2012-10-01

    Chronic fatigue is common in the general population. Complementary therapies are often used by patients with chronic fatigue or chronic fatigue syndrome to manage their symptoms. This study aimed to assess the effect of a 4-month qigong intervention program among patients with chronic fatigue or chronic fatigue syndrome. Sixty-four participants were randomly assigned to either an intervention group or a wait list control group. Outcome measures included fatigue symptoms, physical functioning, mental functioning, and telomerase activity. Fatigue symptoms and mental functioning were significantly improved in the qigong group compared to controls. Telomerase activity increased in the qigong group from 0.102 to 0.178 arbitrary units (p chronic fatigue and chronic fatigue syndrome.

  14. Fatigue studies of superalloys in Japan

    International Nuclear Information System (INIS)

    Kitagawa, Masaki

    1985-01-01

    In the past 15 years, several national projects were advanced to develop high temperature machinery, such as high temperature gas-cooled reactors, gas turbines and fusion reactors. Before, the studies on the strength of superalloys were rarely carried out, however, by the above research works, superalloys are in rapid progress. Because these machinery are subjected to temperature cycles and vibration stress, the fatigue failure is the main concern in the safety analysis of the components. The purpose of this paper is to summarize the present status of the fatigue research on the alloys for high temperature use in Japan. The superalloys used for gas turbine and HTGR components are listed, and the materials tested were mostly the alloys of nickel base, cobalt base or iron base. In the above national projects, the main purpose was to clarify the high temperature properties including fatigue properties, to develop the method of forecasting the life span and to develop better materials. As the topics about the fatigue research on superalloys, the development of the method for forecasting the life span, the effect of directional solidification, coating and HIP process on the fatigue strength of gas turbine materials, the effect of helium and aging on the fatigue strength of HTGR materials, the fatigue strength of weldment of HTGR materials and others are reported. (Kako, I.)

  15. Creep fatigue assessment for EUROFER components

    Energy Technology Data Exchange (ETDEWEB)

    Özkan, Furkan, E-mail: oezkan.furkan@partner.kit.edu; Aktaa, Jarir

    2015-11-15

    Highlights: • Design rules for creep fatigue assessment are developed to EUROFER components. • Creep fatigue assessment tool is developed in FORTRAN code with coupling MAPDL. • Durability of the HCPB-TBM design is discussed under typical fusion reactor loads. - Abstract: Creep-fatigue of test blanket module (TBM) components built from EUROFER is evaluated based on the elastic analysis approach in ASME Boiler Pressure Vessel Code (BPVC). The required allowable number of cycles design fatigue curve and stress-to-rupture curve to estimate the creep-fatigue damage are used from the literature. Local stress, strain and temperature inputs for the analysis of creep-fatigue damage are delivered by the finite element code ANSYS utilizing the Mechanical ANSYS Parametric Design Language (MAPDL). A developed external FORTRAN code used as a post processor is coupled with MAPDL. Influences of different pulse durations (hold-times) and irradiation on creep-fatigue damage for the preliminary design of the Helium Cooled Pebble Bed Test Blanket Module (HCPB-TBM) are discussed for the First Wall component of the TBM box.

  16. Effects of human fatigue on speech signals

    Science.gov (United States)

    Stamoulis, Catherine

    2004-05-01

    Cognitive performance may be significantly affected by fatigue. In the case of critical personnel, such as pilots, monitoring human fatigue is essential to ensure safety and success of a given operation. One of the modalities that may be used for this purpose is speech, which is sensitive to respiratory changes and increased muscle tension of vocal cords, induced by fatigue. Age, gender, vocal tract length, physical and emotional state may significantly alter speech intensity, duration, rhythm, and spectral characteristics. In addition to changes in speech rhythm, fatigue may also affect the quality of speech, such as articulation. In a noisy environment, detecting fatigue-related changes in speech signals, particularly subtle changes at the onset of fatigue, may be difficult. Therefore, in a performance-monitoring system, speech parameters which are significantly affected by fatigue need to be identified and extracted from input signals. For this purpose, a series of experiments was performed under slowly varying cognitive load conditions and at different times of the day. The results of the data analysis are presented here.

  17. COGNITIVE FATIGUE FACILITATES PROCEDURAL SEQUENCE LEARNING

    Directory of Open Access Journals (Sweden)

    Guillermo eBorragán

    2016-03-01

    Full Text Available Enhanced procedural learning has been evidenced in conditions where cognitive control is diminished, including hypnosis, disruption of prefrontal activity and non-optimal time of the day. Another condition depleting the availability of controlled resources is cognitive fatigue. We tested the hypothesis that cognitive fatigue, eventually leading to diminished cognitive control, facilitates procedural sequence learning. In a two-day experiment, twenty-three young healthy adults were administered a serial reaction time task (SRTT following the induction of high or low levels of cognitive fatigue, in a counterbalanced order. Cognitive fatigue was induced using the Time load Dual-back (TloadDback paradigm, a dual working memory task that allows tailoring cognitive load levels to the individual's optimal performance capacity. In line with our hypothesis, reaction times in the SRTT were faster in the high- than in the low-level fatigue condition, and performance improvement showed more of a benefit from the sequential components than from motor. Altogether, our results suggest a paradoxical, facilitating impact of cognitive fatigue on procedural motor sequence learning. We propose that facilitated learning in the high-level fatigue condition stems from a reduction in the cognitive resources devoted to cognitive control processes that normally oppose automatic procedural acquisition mechanisms.

  18. Prevalence of fatigue in general practice.

    Science.gov (United States)

    Cullen, W; Kearney, Y; Bury, G

    2002-01-01

    Fatigue is an important symptom in general practice due to its association with physical, psychological and social problems. To determine the prevalence of fatigue as an unsolicited symptom during general practice consultations. A random sample of GPs practising in Ireland was invited to provide data on consultations held over one day. Data were recorded on the presence of fatigue as a main or supporting symptom, social and demographic characteristics. Data were recorded by 89 GPs on 1,428 consultations. The prevalence of fatigue was 25%. It was the main reason for attending the doctor in 6.5% and a secondary reason in 19%. Sixty-two per cent of patients were female and 48% were eligible for free GP services. The mean age was 47.1 years. The presence of fatigue was associated with: attending a female GP, being female, attending a GP who had been qualified for fewer years and attending the GP frequently. The prevalence of fatigue reported in this study is over three times higher than that reported in earlier work. Doctor characteristics appear to be as important as patient characteristics in determining fatigue.

  19. Chronic fatigue syndrome: aetiology, diagnosis and treatment

    Science.gov (United States)

    Avellaneda Fernández, Alfredo; Pérez Martín, Álvaro; Izquierdo Martínez, Maravillas; Arruti Bustillo, Mar; Barbado Hernández, Francisco Javier; de la Cruz Labrado, Javier; Díaz-Delgado Peñas, Rafael; Gutiérrez Rivas, Eduardo; Palacín Delgado, Cecilia; Rivera Redondo, Javier; Ramón Giménez, José Ramón

    2009-01-01

    Chronic fatigue syndrome is characterised by intense fatigue, with duration of over six months and associated to other related symptoms. The latter include asthenia and easily induced tiredness that is not recovered after a night's sleep. The fatigue becomes so severe that it forces a 50% reduction in daily activities. Given its unknown aetiology, different hypotheses have been considered to explain the origin of the condition (from immunological disorders to the presence of post-traumatic oxidative stress), although there are no conclusive diagnostic tests. Diagnosis is established through the exclusion of other diseases causing fatigue. This syndrome is rare in childhood and adolescence, although the fatigue symptom per se is quite common in paediatric patients. Currently, no curative treatment exists for patients with chronic fatigue syndrome. The therapeutic approach to this syndrome requires a combination of different therapeutic modalities. The specific characteristics of the symptomatology of patients with chronic fatigue require a rapid adaptation of the educational, healthcare and social systems to prevent the problems derived from current systems. Such patients require multidisciplinary management due to the multiple and different issues affecting them. This document was realized by one of the Interdisciplinary Work Groups from the Institute for Rare Diseases, and its aim is to point out the main social and care needs for people affected with Chronic Fatigue Syndrome. For this, it includes not only the view of representatives for different scientific societies, but also the patient associations view, because they know the true history of their social and sanitary needs. In an interdisciplinary approach, this work also reviews the principal scientific, medical, socio-sanitary and psychological aspects of Chronic Fatigue Syndrome. PMID:19857242

  20. Fatigue in adults with post-infectious fatigue syndrome: a qualitative content analysis.

    Science.gov (United States)

    Stormorken, Eva; Jason, Leonard A; Kirkevold, Marit

    2015-01-01

    Fatigue is a major problem among individuals with post-infectious fatigue syndrome (PIFS), also known as chronic fatigue syndrome or myalgic encephalomyelitis. It is a complex phenomenon that varies across illnesses. From a nursing perspective, knowledge and understanding of fatigue in this illness is limited. Nurses lack confidence in caring for these patients and devalue their professional role. The aim of this study was to explore in-depth the experiences of fatigue among individuals with PIFS. A detailed description of the phenomenon of fatigue is presented. Increased knowledge would likely contribute to more confident nurses and improved nursing care. A qualitative study with open interviews was employed. In-depth interviews with patients were fully transcribed and underwent a qualitative content analysis. A maximum variation sample of 26 affected adults between 26-59 years old was recruited from a population diagnosed at a fatigue outpatient clinic. The fatigue was a post-exertional, multidimensional, fluctuating phenomenon with varying degrees of severity and several distinct characteristics and was accompanied by concomitant symptoms. Fatigue was perceived to be an all-pervasive complex experience that substantially reduced the ability to function personally or professionally. A range of trigger mechanisms evoked or worsened the fatigue, but the affected were not always aware of what triggered it. There was an excessive increase in fatigue in response to even minor activities. An increase in fatigue resulted in the exacerbation of other concomitant symptoms. The term fatigue does not capture the participants' experiences, which are accompanied by a considerable symptom burden that contributes to the illness experience and the severe disability. Although some aspects of the fatigue experience have been reported previously, more were added in our study, such as the dimension of awakening fatigue and the characteristic beyond time, when time passes unnoticed

  1. Muscle glycogen stores and fatigue

    DEFF Research Database (Denmark)

    Ørtenblad, Niels; Westerblad, Håkan; Nielsen, Joachim

    2013-01-01

      Studies performed at the beginning of the last century revealed the importance of carbohydrate as a fuel during exercise, and the importance of muscle glycogen on performance has subsequently been confirmed in numerous studies. However, the link between glycogen depletion and impaired muscle...... function during fatigue is not well understood and a direct cause-and-effect relationship between glycogen and muscle function remains to be established. The use of electron microscopy has revealed that glycogen is not homogeneously distributed in skeletal muscle fibres, but rather localized in distinct...... pools. Furthermore, each glycogen granule has its own metabolic machinery with glycolytic enzymes and regulating proteins. One pool of such glycogenolytic complexes is localized within the myofibrils in close contact with key proteins involved in the excitation-contraction coupling and Ca2+ release from...

  2. Fatigue aging of adhesive bonds

    International Nuclear Information System (INIS)

    DeLollis, N.J.

    1979-01-01

    A year long study has been made of the effect of fatigue on the bond between two epoxy encapsulant formulations and a fused alumina disc. The variables studied included isothermal aging at temperatures up to and including the cure temperature and cyclic thermal aging from +74 to -54 0 C. The encapsulants were glass microballoon filled epoxies differing only in curing agents. One was cured with an aromatic amine eutectic (Shell Curing Agent Z). The other was cured with diethanolamine. The Z cured encapsulant bond failed completely at the bond interface with little or no aging; infrared evidence indicated a soluble interlayer as a possible cause of failure. The diethanolamine cured encapsulant survived a year of isothermal aging with little or no evidence of bond degradation. Cyclic thermal aging resulted in gradual bond failure with time. An extrapolation of the cyclic aging data indicates that the stresses induced by thermal cycling would result in complete bond failure in about 1200 days

  3. Does Corruption Cause Aid Fatigue?

    DEFF Research Database (Denmark)

    Bauhr, Monika; Charron, Nicholas; Nasiritousi, Naghmeh

    2013-01-01

    Does perceived corruption in recipient countries reduce support for foreign aid in donor countries? This under-explored yet salient question is examined using the 2009 Eurobarometer survey for the 27 EU countries. We suggest that perceived corruption can cause aid fatigue but that this relationship...... is highly contextualized. The results show that perceptions about corruption in developing countries reduce overall support for aid among respondents in donor countries. However, this effect is mitigated by country and contextual-level effects and different understandings of what we call the “aid-corruption...... paradox,” namely that the need for foreign aid is often the greatest in corrupt environments. Three different dynamics of the aid-corruption paradox influence support for aid: moral, pragmatic, and strategic understandings. In EU-15 countries, the effect of perceived corruption in recipient states on aid...

  4. Enquête de satisfaction des restaurants

    CERN Multimedia

    Staff Association

    2016-01-01

    Comité de surveillance des restaurants L’Association du personnel est représentée dans plusieurs comités dont le Comité de surveillance des restaurants (CSR) qui a pour mandat : de donner son avis sur toute question relative à la politique générale de l’Organisation en matière de restauration sur le site, y compris en ce qui concerne les termes et l’attribution des contrats d’exploitation des restaurants ; de définir dans le cadre des contrats d’exploitation des restaurants, les prestations correspondant aux besoins et, dans la mesure du possible, aux désirs du personnel ; de surveiller les prestations des restaurants, y compris en ce qui concerne la qualité et la préparation des produits ; de négocier avec les concessionnaires des restaurants au sujet des tarifs et de surveill...

  5. Administration et gestion des contrats XL

    CERN Document Server

    Senouf, J

    2000-01-01

    Les grands contrats de travaux génèrent un grand nombre de commandes (OSVC) passées par un grand nombre de responsables techniques. Ils sont généralement basés sur des bordereaux de prix associés à un éventail de conditions économiques adaptées aux besoins complexes et variés des multiples utilisateurs du CERN nécessitant des calculs sophistiqués. L'administration des commandes, le suivi des travaux et de la facturation doivent répondre aux besoins de tous les acteurs. Les responsables techniques doivent jouir de la plus large indépendance administrative dans le respect des règlements CERN et des conditions contractuelles. Le contrôle des métrés et décomptes doit être rigoureux et d'une traçabilité complète. L'utilisation des bases de données Oracle a déjà permis l'intégration des données administratives et techniques. Le Web nous invite à une communication totale et transparente entre les utilisateurs, les services techniques et les contractants. De nouveaux types de contrat so...

  6. Study on Standard Fatigue Vehicle Load Model

    Science.gov (United States)

    Huang, H. Y.; Zhang, J. P.; Li, Y. H.

    2018-02-01

    Based on the measured data of truck from three artery expressways in Guangdong Province, the statistical analysis of truck weight was conducted according to axle number. The standard fatigue vehicle model applied to industrial areas in the middle and late was obtained, which adopted equivalence damage principle, Miner linear accumulation law, water discharge method and damage ratio theory. Compared with the fatigue vehicle model Specified by the current bridge design code, the proposed model has better applicability. It is of certain reference value for the fatigue design of bridge in China.

  7. Corrosion Fatigue in District Heating Water Tanks

    DEFF Research Database (Denmark)

    Maahn, Ernst Emanuel

    1996-01-01

    Three candidate materials for construction of buffer tanks for district heating water have been tested for corrosion fatigue properties in a district heating water environment. The investigation included Slow Strain Rate Testing of plain tensile specimens, crack initiation testing by corrosion...... fatigue of plain tensile specimens and crack growth rate determination for Compact Tensile Specimens under corrosion fatigue conditions. The three materials are equal with respect to stress corrosion sensibility and crack initiation. Crack growth rate is increased with a factor of 4-6 relative to an inert...

  8. Cancer-Related Fatigue in Cancer Survivorship.

    Science.gov (United States)

    Ebede, Chidinma C; Jang, Yongchang; Escalante, Carmen P

    2017-11-01

    Cancer-related fatigue (CRF) significantly interferes with usual functioning because of the distressing sense of physical, emotional, and cognitive exhaustion. Assessment of CRF is important and should be performed during the initial cancer diagnosis, throughout cancer treatment, and after treatment using a fatigue scoring scale (mild-severe). The general approach to CRF management applies to cancer survivors at all fatigue levels and includes education, counseling, and other strategies. Nonpharmacologic interventions include psychosocial interventions, exercise, yoga, physically based therapy, dietary management, and sleep therapy. Pharmacologic interventions include psychostimulants. Antidepressants may also benefit when CRF is accompanied by depression. Copyright © 2017 Elsevier Inc. All rights reserved.

  9. Jacket Substructure Fatigue Mitigation through Active Control

    DEFF Research Database (Denmark)

    Hanis, Tomas; Natarajan, Anand

    2014-01-01

    to the fatigue design loads on the braces of the jacket. Since large wind turbines of 10MW rating have low rotor speeds (p), the modal frequencies of the sub structures approach 3p at low wind speeds, which leads to a modal coupling and resonance. Therefore an active control system is developed which provides...... sufficient structural damping and consequently a fatigue reduction at the substructure. The resulting reduction in fatigue design loads on the jacket structure based on the active control system is presented....

  10. Post-traumatic hypopituitarism and fatigue.

    Science.gov (United States)

    Masel, Brent E; Zgaljardic, Dennis J; Forman, Jack

    2017-10-01

    Post-traumatic hypopituitarism (PTH) associated with chronic cognitive, psychiatric, and/or behavioural sequelae is common following moderate to severe traumatic brain injury (TBI). More specifically, due to a cascade of hormonal deficiencies secondary to PTH, individuals with TBI may experience debilitating fatigue that can negatively impact functional recovery, as it can limit participation in brain injury rehabilitation services and lead to an increase in maladaptive lifestyle practices. While the mechanisms underlying fatigue and TBI are not entirely understood, the current review will address the specific anatomy and physiology of the pituitary gland, as well as the association between pituitary dysfunction and fatigue in individuals with TBI.

  11. Effect of Fatigue Training on Safety, Fatigue, and Sleep in Emergency Medical Services Personnel and Other Shift Workers: A Systematic Review and Meta-Analysis

    Science.gov (United States)

    2018-01-11

    Background: Fatigue training may be an effective way to mitigate fatigue-related risk. We aimed to critically review and synthesize existing literature on the impact of fatigue training on fatigue-related outcomes for Emergency Medical Services (EMS)...

  12. Inflammatory fatigue and sickness behaviour - lessons for the diagnosis and management of chronic fatigue syndrome.

    Science.gov (United States)

    Arnett, S V; Clark, I A

    2012-12-10

    Persistent and severe fatigue is a common part of the presentation of a diverse range of disease processes. There is a growing body of evidence indicating a common inflammatory pathophysiology underlying many conditions where fatigue is a primary patient concern, including chronic fatigue syndrome. This review explores current models of how inflammatory mediators act on the central nervous system to produce fatigue and sickness behaviour, and the commonality of these processes in conditions as diverse as surgical trauma, infection, various cancers, inflammatory bowel disease, connective tissue diseases and autoimmune diseases. We also discuss evidence indicating chronic fatigue syndrome may have important pathophysiological similarities with cytokine mediated sickness behaviour, and what lessons can be applied from sickness behaviour to chronic fatigue syndrome with regards to the diagnosis and management. Copyright © 2012 Elsevier B.V. All rights reserved.

  13. Multi-purpose fatigue sensor. Part 1. Uniaxial and multiaxial fatigue

    Directory of Open Access Journals (Sweden)

    M.V. Karuskevich

    2016-10-01

    Full Text Available The paper describes the key principles and results of preliminary experiments aimed at the development of new technique for the fatigue life prediction under conditions of biaxial cyclic tension. The foundations of the method were developed early by the numerous tests with monitoring the process of surface deformation relief formation, which is proved to be an indicator of accumulated fatigue damage under uniaxial fatigue. The employed phenomenon was early applied for the development of a family of uniaxial loading fatigue sensors. The formation of strain induced relief has been recently taken into consideration as a part of damage accumulation criteria under biaxial fatigue as well. The home-made testing machine has been designed to implement combined bending and torsion loading that simulates loads experienced by an aircraft wing skin. The experimental evidences on formation and evolution of the deformation relief revealed under conditions of combined loading, supports the proposed concept of biaxial fatigue sensor

  14. Evaluation of micro fatigue crack growth under equi-biaxial stress by membranous pressure fatigue test

    International Nuclear Information System (INIS)

    Iida, Satoshi; Abe, Shigeki; Nakamura, Takao; Kamaya, Masayuki

    2014-01-01

    For preventing nuclear power plant (NPP) accidents, NPPs are required to ensure system safety in long term safe operation under aging degradation. Now, fatigue accumulation is one of major ageing phenomena and are evaluated to ensure safety by design fatigue curve that are based on the results of uniaxial fatigue tests. On the other hand, thermal stress that occurs in piping of actual components is not uniaxial but equi-biaxial. For accurate evaluation, it is required to conform real circumstance. In this study, membranous pressure fatigue test was conducted to simulated equi-biaxial stress. Crack initiation and crack growth were examined by replica investigation. Calculation result of equivalent stress intensity factor shows crack growth under equi-biaxial stress is faster than under uniaxial stress. It is concluded that equi-biaxial fatigue behavior should be considered in the evaluation of fatigue crack initiation and crack growth. (author)

  15. La production mondiale des vins

    Directory of Open Access Journals (Sweden)

    Pierre GALET

    1970-06-01

    On sait peu de choses précises sur l'origine de la culture de la vigne en Gaule. Il est probable qu'il existait des lambrusques sauvages dans les forêts et les sous-bois dont les habitants récoltaient les raisins pour les consommer à l'état frais et peut-être en tiraient-ils aussi une boisson fermentée comme ils le faisaient pour l'orge ou pour le miel (hydromel. Il est vraisemblable aussi que les navigateurs phocéens, venus commercer sur les rivages de la Méditerranée, apportèrent du vin aux gaulois, leur apprirent à tailler la vigne et finalement, en établissant des comptoirs, amenèrent des boutures de vignes de leur propre pays. On sait que les gaulois apprécièrent très vite le vin et ce fut une des raisons de leurs invasion de la Toscane pour y consommer sur place cette « boisson magique ». Plus tard avec l'occupation romaine la culture de la vigne s'étendit dans toute la province narbonnaise, dans la vallée du Rhône jusqu'aux portes de Lyon, puis en Aquitaine. A leur tour les romains se mirent à apprécier les vins gaulois, de qualité supérieure à ceux récoltés en Italie sur les Hautains. A l'aide de la navigation fluviale sur le Rhône les vins gagnèrent Rome, ainsi que ceux embarqués dans les petits ports du rivage méditerranéen. Puis au cours des siècles et grâce notamment aux religieux catholiques la vigne se répandit dans toutes les provinces. A la veille de la Révolution, en 1788, on estimait la superficie cultivée à 1.567.000 hectares, produisant 27 millions d'hectolitres. Au cours du XIXe siècle, les plantations augmentèrent en raison des facilités de transport que permettait l'établissement des lignes de chemin de fer. Le ravitaillement des grandes villes fut assuré par la création d'un important vignoble dans le Midi. En 1875, la superficie cultivée dépassait 2,4 millions d'hectares et la France produisit 83,8 millions d'hectolitres, record absolu qui ne fut jamais plus atteint depuis. La crise phyllox

  16. La territorialisation des politiques environnementales

    Directory of Open Access Journals (Sweden)

    Amédée Mollard

    2010-10-01

    Full Text Available Le point de départ de cet article est la grande variabilité de la pollution nitrique diffuse de l’eau due à l’agriculture. Celle-ci dépend en particulier du climat, des types de sol et des systèmes de production agricole. Nos recherches réalisées de façon interdisciplinaire à partir de deux sites différents en France, montrent que cette hétérogénéité spatio-temporelle conditionne les pratiques agricoles mises en œuvre pour réduire la pollution au niveau de la norme admise. De ce fait, les pratiques les plus « coût-efficaces » diffèrent d’un territoire à l’autre, en fonction des caractéristiques locales. Ces résultats mettent donc en évidence une efficacité potentielle d’une territorialisation des politiques publiques. En théorie, de telles politiques sont considérées comme optimales par les économistes, car elles incitent les agents à moduler leurs efforts en fonction de la sensibilité du milieu. Mais, selon les études empiriques, cet avantage serait annulé par un coût élevé de mise en œuvre, de contrôle et de surveillance. Pour maintenir leur avantage sur des politiques uniformes, les politiques territorialisées devraient être mises en œuvre à un niveau spatial optimal. Un tel niveau devrait au minimum atteindre un compromis entre l’économie réalisée grâce à une modulation adaptée aux conditions locales et les sur-coûts dus à la décentralisation des solutions mises en œuvre. Cet article analyse la pertinence d’une prise en compte de ces spécificités par des politiques territorialisées. L’efficacité d’une régulation différenciée de la pollution nitrique est étudiée ici en évaluant l’importance de la variabilité spatiale des paramètres physiques et des coûts de la territorialisation.The paper starts with the wide variability of nonpoint water nitrogenous pollution generated by agriculture. This variability depends especially on climate, soil types and farming

  17. Neuromuscular fatigue during exercise: Methodological considerations, etiology and potential role in chronic fatigue.

    Science.gov (United States)

    Twomey, Rosie; Aboodarda, Saied Jalal; Kruger, Renata; Culos-Reed, Susan Nicole; Temesi, John; Millet, Guillaume Y

    2017-04-01

    The term fatigue is used to describe a distressing and persistent symptom of physical and/or mental tiredness in certain clinical populations, with distinct but ultimately complex, multifactorial and heterogenous pathophysiology. Chronic fatigue impacts on quality of life, reduces the capacity to perform activities of daily living, and is typically measured using subjective self-report tools. Fatigue also refers to an acute reduction in the ability to produce maximal force or power due to exercise. The classical measurement of exercise-induced fatigue involves neuromuscular assessments before and after a fatiguing task. The limitations and alternatives to this approach are reviewed in this paper in relation to the lower limb and whole-body exercise, given the functional relevance to locomotion, rehabilitation and activities of daily living. It is suggested that under some circumstances, alterations in the central and/or peripheral mechanisms of fatigue during exercise may be related to the sensations of chronic fatigue. As such, the neurophysiological correlates of exercise-induced fatigue are briefly examined in two clinical examples where chronic fatigue is common: cancer survivors and people with multiple sclerosis. This review highlights the relationship between objective measures of fatigability with whole-body exercise and perceptions of fatigue as a priority for future research, given the importance of exercise in relieving symptoms of chronic fatigue and/or overall disease management. As chronic fatigue is likely to be specific to the individual and unlikely to be due to a simple biological or psychosocial explanation, tailored exercise programmes are a potential target for therapeutic intervention. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

  18. Numerical analysis of rolling contact fatigue crack initiation and fatigue life prediction of the railway crossing

    OpenAIRE

    Xin, L.; Markine, V.L.; Shevtsov, I.

    2015-01-01

    The procedure for analysing rolling contact fatigue crack initiation and fatigue life prediction of the railway turnout crossing is developed. A three-dimensional finite element (FE) model is used to obtain stress and strain results, considering the dynamic effects of wheel-crossing rolling contact. Material model accounting for elastic- plastic isotropic and kinematic hardening effects is adopted. The results from FE analysis are combined with J-S fatigue model that is based on critical plan...

  19. Fatigue Test Design: Scenarios for Biaxial Fatigue Testing of a 60-Meter Wind Turbine Blade

    Energy Technology Data Exchange (ETDEWEB)

    Post, Nathan [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-07-01

    Current practice in commercial certification of wind turbine blades is to perform separate flap and lead-lag fatigue tests. The National Renewable Energy Laboratory has been researching and evaluating biaxial fatigue testing techniques and demonstrating various options, typically on smaller-scale test articles at the National Wind Technology Center. This report evaluates some of these biaxial fatigue options in the context of application to a multimegawatt blade certification test program at the Wind Technology Testing Center in Charlestown, Massachusetts.

  20. Myoelectrical manifestation of fatigue less prominent in patients with cancer related fatigue.

    Directory of Open Access Journals (Sweden)

    Katarzyna Kisiel-Sajewicz

    Full Text Available PURPOSE: A lack of fatigue-related muscle contractile property changes at time of perceived physical exhaustion and greater central than peripheral fatigue detected by twitch interpolation technique have recently been reported in cancer survivors with fatigue symptoms. Based on these observations, it was hypothesized that compared to healthy people, myoelectrical manifestation of fatigue in the performing muscles would be less significant in these individuals while sustaining a prolonged motor task to self-perceived exhaustion (SPE since their central fatigue was more prominent. The purpose of this study was to test this hypothesis by examining electromyographic (EMG signal changes during fatiguing muscle performance. METHODS: Twelve individuals who had advanced solid cancer and cancer-related fatigue (CRF, and 12 age- and gender-matched healthy controls performed a sustained elbow flexion at 30% maximal voluntary contraction till SPE. Amplitude and mean power frequency (MPF of EMG signals of the biceps brachii, brachioradialis, and triceps brachii muscles were evaluated when the individuals experienced minimal, moderate, and severe fatigue. RESULTS: CRF patients perceived physical "exhaustion" significantly sooner than the controls. The myoelectrical manifestation of muscular fatigue assessed by EMG amplitude and MPF was less significant in CRF than controls. The lower MPF even at minimal fatigue stage in CRF may indicate pathophysiologic condition of the muscle. CONCLUSIONS: CRF patients experience less myoelectrical manifestation of muscle fatigue than healthy individuals near the time of SPE. The data suggest that central nervous system fatigue plays a more important role in limiting endurance-type of motor performance in patients with CRF.

  1. DES EFFETS DURABLES DES VIES TRANSFORMÉES

    International Development Research Centre (IDRC) Digital Library (Canada)

    Son but est simple : veiller à ce que les personnes les plus vulnérables dans le monde, en particulier ... Simple et pourtant très efficace, le filtre biosable fournit de l'eau potable dans plus de 300 000 foyers de par le ... de rétablir la fertilité des sols dégradés par l'extraction de l'argile nécessaire à la fabrication de briques, ...

  2. Regroupement des statistiques sur le secteur des TIC et analyse ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    La présence et l'influence des technologies de l'information et de la communication (TIC) continuent de s'élargir et de s'accroître, tout comme leurs répercussions sur le développement économique. Toutefois, il reste encore beaucoup de travail à faire avant de pouvoir comprendre d'une manière systématique et ...

  3. Étude cytogenetique des aberrations chromosomiques chez des ...

    African Journals Online (AJOL)

    Ces techniciens et volontaires témoins ont été soumis à l'épreuve de prélèvement de 5 ml de sang veineux au pli du coude dans des tubes d'héparine sodique. Après 48 ... These technicians and Volunteers (controls) were subjected to the test sample of 5 ml of venous blood to the elbow crease in sodium heparin tubes.

  4. Des experts discutent des conflits non conventionnels dans les ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    21 juil. 2015 ... Le rapport souligne les principaux défis à relever lorsqu'il est question de conflits non conventionnels et de violence dans les Amériques. ... Bien que de nombreux États aient recours à la médiation avec des acteurs du crime organisé en vue de réduire le nombre de leurs actes de violence ou d'y mettre fin, ...

  5. Effets des biomasses vertes de Tithonia diversifolia et des engrais ...

    African Journals Online (AJOL)

    même dans les sols peu fertiles (McKey et al.,. 2012 ; Temegne et al., 2015). Cependant, il peut aussi produire beaucoup plus lorsqu'il est cultivé avec un supplément judicieux d'engrais. La fertilisation minérale conventionnelle est incompatible avec le contexte économique du paysan camerounais du fait du coût élevé des ...

  6. Caractérisation des plantes médicinales à flavonoïdes des marchés ...

    African Journals Online (AJOL)

    Les espèces guinéo-congolaises sont les plus abondantes et le mode de dissémination majoritaire des diaspores est la zoochorie. Les plantes à flavonoïdes les plus utilisées sont : Combretum micranthum, Aloe vera, Ageratum conyzoïdes et Cylicodiscus gabonensis. Elles rentrent dans le traitement de 73 maladies parmi ...

  7. Fatigue behaviour of bituminous materials : from binders to mixes

    OpenAIRE

    SOENEN, H; DE LA ROCHE, C; REDELIUS, P

    2003-01-01

    Test procedures, aiming at measuring fatigue directly on bituminous binders, are increasingly used. The purpose of this paper is to investigate the relevance of this type of binder fatigue tests and to compare the results with laboratory fatigue properties of the corresponding mixes, using one mix composition for all binders, and similar fatigue tests conditions. Eight binders were selected, derived from two crude sources, including an oxidised and two polymer modified samples. All fatigue te...

  8. Development and characterization of fatigue resistant Aramid reinforced aluminium laminates (ARALL) for fatigue Critical aircraft components

    Science.gov (United States)

    Qaiser, M. H.; Umar, S.; Nauman, S.

    2014-06-01

    The structural weight of an aircraft has always been a controlling parameter that governs its fuel efficiency and transport capacity. In pursuit of achieving light-weight aircraft structures, high design stress levels have to be adopted and materials with high specific strength such as Aluminum etc. are to be deployed. However, an extensive spectrum of fatigue load exists at the aircraft wings and other aerodynamic components that may cause initiation and propagation of fatigue cracks and concludes in a catastrophic rupture. Fatigue is therefore the limiting design parameter in such cases and materials with high fatigue resistance are then required. A major improvement in the fatigue behavior was observed by laminating Kevlar fibers with Aluminum using epoxy. ARALL (Aramid Reinforced ALuminum Laminates) is a fatigue resistant hybrid composite that consists of layers of thin high strength aluminum alloy sheets surface bonded with aramid fibers. The intact aramid fibers tie up the fatigue cracks, thus reducing the stress intensity factor at the crack tip as a result of which the fatigue properties of can be enhanced with orders of magnitude as compared to monolithic high strength Aluminum alloy sheets. Significant amount of weight savings can be achieved in fatigue critical components in comparison with the traditional materials used in aircraft.

  9. Development and characterization of fatigue resistant Aramid reinforced aluminium laminates (ARALL) for fatigue Critical aircraft components

    International Nuclear Information System (INIS)

    Qaiser, M H; Umar, S; Nauman, S

    2014-01-01

    The structural weight of an aircraft has always been a controlling parameter that governs its fuel efficiency and transport capacity. In pursuit of achieving light-weight aircraft structures, high design stress levels have to be adopted and materials with high specific strength such as Aluminum etc. are to be deployed. However, an extensive spectrum of fatigue load exists at the aircraft wings and other aerodynamic components that may cause initiation and propagation of fatigue cracks and concludes in a catastrophic rupture. Fatigue is therefore the limiting design parameter in such cases and materials with high fatigue resistance are then required. A major improvement in the fatigue behavior was observed by laminating Kevlar fibers with Aluminum using epoxy. ARALL (Aramid Reinforced ALuminum Laminates) is a fatigue resistant hybrid composite that consists of layers of thin high strength aluminum alloy sheets surface bonded with aramid fibers. The intact aramid fibers tie up the fatigue cracks, thus reducing the stress intensity factor at the crack tip as a result of which the fatigue properties of can be enhanced with orders of magnitude as compared to monolithic high strength Aluminum alloy sheets. Significant amount of weight savings can be achieved in fatigue critical components in comparison with the traditional materials used in aircraft

  10. Development and characterization of fatigue resistant aramid reinforced aluminium laminates (ARALL) for fatigue critical aircraft components

    International Nuclear Information System (INIS)

    Qaiser, M. H.; Umar, S.; Nauman, S.

    2013-01-01

    The structural weight of an aircraft has always been a controlling parameter that governs its fuel efficiency and transport capacity. In pursuit of achieving light-weight aircraft structures, high design stress levels have to be adopted and materials with high specific strength such as Aluminum etc. are to be deployed. However, an extensive spectrum of fatigue load exists at the aircraft wings and other aerodynamic components that may cause initiation and propagation of fatigue cracks and concludes in a catastrophic rupture. Fatigue is therefore the limiting design parameter in such cases and materials with high fatigue resistance are then required. A major improvement in the fatigue behavior was observed by laminating Kevlar fibers with Aluminum using epoxy. ARALL (Aramid Reinforced Aluminum Laminates) is a fatigue resistant hybrid composite that consists of layers of thin high strength aluminum alloy sheets surface bonded with aramid fibers. The intact aramid fibers tie up the fatigue cracks, thus reducing the stress intensity factor at the crack tip as a result of which the fatigue properties of can be enhanced with orders of magnitude as compared to monolithic high strength Aluminum alloy sheets. Significant amount of weight savings can be achieved in fatigue critical components in comparison with the traditional materials used in aircraft. (author)

  11. Effects of mental fatigue on the development of physical fatigue: a neuroergonomic approach.

    Science.gov (United States)

    Mehta, Ranjana K; Parasuraman, Raja

    2014-06-01

    The present study used a neuroergonomic approach to examine the interaction of mental and physical fatigue by assessing prefrontal cortex activation during submaximal fatiguing handgrip exercises. Mental fatigue is known to influence muscle function and motor performance, but its contribution to the development of voluntary physical fatigue is not well understood. A total of 12 participants performed separate physical (control) and physical and mental fatigue (concurrent) conditions at 30% of their maximal handgrip strength until exhaustion. Functional near infrared spectroscopy was employed to measure prefrontal cortex activation, whereas electromyography and joint steadiness were used simultaneously to quantify muscular effort. Compared to the control condition, blood oxygenation in the bilateral prefrontal cortex was significantly lower during submaximal fatiguing contractions associated with mental fatigue at exhaustion, despite comparable muscular responses. The findings suggest that interference in the prefrontal cortex may influence motor output during tasks that require both physical and cognitive processing. A neuroergonomic approach involving simultaneous monitoring of brain and body functions can provide critical information on fatigue development that may be overlooked during traditional fatigue assessments.

  12. Fatigue and radiotherapy. A literature review; Fatigue et radiotherapie. Revue de la litterature

    Energy Technology Data Exchange (ETDEWEB)

    Dilhuydy, J.M.; Ouhtatou, F.; Laporte, C.; Nguyen, T.V.F.; Vendrely, V. [Institut Bergonie Centre Regional de Lutte Contre le Cancer, 33 - Bordeaux (France); Dilhuydy, J.M. [Federation Nationale des Centres de Lutte Contre le Cancer, FNCLCC, Groupe Rehabilitation, 75 - Paris (France); Dilhuydy, M.S. [Hopital Saint-Andre, Service de Medecine Interne, 33 - Bordeaux (France)

    2001-11-01

    Fatigue is a common complaint for the cancer patient during and after radiotherapy, according to the published studies. Fatigue is a subjective symptom mostly underestimated by oncologists and other care givers. Etiology is complex, poorly understood in spite of obvious causes like insomnia, nausea, pain, depression, psychological distress, anemia, hypothyroidism, menopause disturbances, treatment adverse effects. Fatigue presents multi-factorial and multidimensional aspects. To evaluate it, many tools can be used as single-item, unidimensional and multidimensional instruments. Practically, the open discussion with the patient throughout radiotherapy is essential to define it. Taking charge fatigue requires its acknowledgement by radiotherapist, treatment of associated symptoms with a multidisciplinary approach. (authors)

  13. Taltirelin alleviates fatigue-like behavior in mouse models of cancer-related fatigue.

    Science.gov (United States)

    Dougherty, John P; Wolff, Brian S; Cullen, Mary J; Saligan, Leorey N; Gershengorn, Marvin C

    2017-10-01

    Fatigue affects most cancer patients and has numerous potential causes, including cancer itself and cancer treatment. Cancer-related fatigue (CRF) is not relieved by rest, can decrease quality of life, and has no FDA-approved therapy. Thyrotropin-releasing hormone (TRH) has been proposed as a potential novel treatment for CRF, but its efficacy against CRF remains largely untested. Thus, we tested the TRH analog, taltirelin (TAL), in mouse models of CRF. To model fatigue, we used a mouse model of chemotherapy, a mouse model of radiation therapy, and mice bearing colon 26 carcinoma tumors. We used the treadmill fatigue test to assess fatigue-like behavior after treatment with TAL. Additionally, we used wild-type and TRH receptor knockout mice to determine which TRH receptor was necessary for the actions of TAL. Tumor-bearing mice displayed muscle wasting and all models caused fatigue-like behavior, with mice running a shorter distance in the treadmill fatigue test than controls. TAL reversed fatigue-like behavior in all three models and the mouse TRH 1 receptor was necessary for the effects of TAL. These data suggest that TAL may be useful in alleviating fatigue in all cancer patients and provide further support for evaluating TAL as a potential therapy for CRF in humans. Published by Elsevier Ltd.

  14. The effects of fatigue on performance in simulated nursing work.

    Science.gov (United States)

    Barker, Linsey M; Nussbaum, Maury A

    2011-09-01

    Fatigue is associated with increased rates of medical errors and healthcare worker injuries, yet existing research in this sector has not considered multiple dimensions of fatigue simultaneously. This study evaluated hypothesised causal relationships between mental and physical fatigue and performance. High and low levels of mental and physical fatigue were induced in 16 participants during simulated nursing work tasks in a laboratory setting. Task-induced changes in fatigue dimensions were quantified using both subjective and objective measures, as were changes in performance on physical and mental tasks. Completing the simulated work tasks increased total fatigue, mental fatigue and physical fatigue in all experimental conditions. Higher physical fatigue adversely affected measures of physical and mental performance, whereas higher mental fatigue had a positive effect on one measure of mental performance. Overall, these results suggest causal effects between manipulated levels of mental and physical fatigue and task-induced changes in mental and physical performance. STATEMENT OF RELEVANCE: Nurse fatigue and performance has implications for patient and provider safety. Results from this study demonstrate the importance of a multidimensional view of fatigue in understanding the causal relationships between fatigue and performance. The findings can guide future work aimed at predicting fatigue-related performance decrements and designing interventions.

  15. Finite element simulation of asphalt fatigue testing

    DEFF Research Database (Denmark)

    Ullidtz, Per; Kieler, Thomas Lau; Kargo, Anders

    1997-01-01

    The traditional interpretation of fatigue tests on asphalt mixes has been in terms of a logarithmic linear relationship between the constant stress or strain amplitude and the number of load repetitions to cause failure, often defined as a decrease in modulus to half the initial value...... damage mechanics.The paper describes how continuum damage mechanics may be used with a finite element program to explain the progressive deterioration of asphalt mixes under laboratory fatigue testing. Both constant stress and constant strain testing are simulated, and compared to the actual results from...... three point and four point fatigue test on different mixes. It is shown that the same damage law, based on energy density, may be used to explain the gradual deterioration under constant stress as well as under constant strain testing.Some of the advantages of using this method for interpreting fatigue...

  16. Domain switching of fatigued ferroelectric thin films

    Science.gov (United States)

    Tak Lim, Yun; Yeog Son, Jong; Shin, Young-Han

    2014-05-01

    We investigate the domain wall speed of a ferroelectric PbZr0.48Ti0.52O3 (PZT) thin film using an atomic force microscope incorporated with a mercury-probe system to control the degree of electrical fatigue. The depolarization field in the PZT thin film decreases with increasing the degree of electrical fatigue. We find that the wide-range activation field previously reported in ferroelectric domains result from the change of the depolarization field caused by the electrical fatigue. Domain wall speed exhibits universal behavior to the effective electric field (defined by an applied electric field minus the depolarization field), regardless of the degree of the electrical fatigue.

  17. Fatigue-free PZT-based nanocomposites

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, H J; Sando, M [Nat. Ind. Res. Inst., Nagoya (Japan); Tajima, K [Synergy Ceramics Lab., Fine Ceramics Research Association, Nagoya (Japan); Niihara, K [ISIR, Osaka Univ., Mihogaoka, Ibaraki (Japan)

    1999-03-01

    The goal of this study is to fabricate fatigue-free piezoelectrics-based nanocomposites. Lead zirconate titanate (PZT) and metallic platinum (Pt) were selected as a matrix and secondary phase dispersoid. Fine Pt particles were homogeneously dispersed in the PZT matrix. Fatigue properties of the unpoled PZT-based nanocomposite under electrical cyclic loading were investigated. The electrical-field-induced crack growth was monitored by an optical microscope, and it depended on the number of cycles the sample was subjected to. Resistance to fatigue was significantly enhanced in the nanocomposite. The excellent fatigue behavior of the PZT/Pt nanocomposites may result from the grain boundary strenghtening due to the interaction between the matrix and Pt particles. (orig.) 8 refs.

  18. Domain switching of fatigued ferroelectric thin films

    International Nuclear Information System (INIS)

    Tak Lim, Yun; Yeog Son, Jong; Shin, Young-Han

    2014-01-01

    We investigate the domain wall speed of a ferroelectric PbZr 0.48 Ti 0.52 O 3 (PZT) thin film using an atomic force microscope incorporated with a mercury-probe system to control the degree of electrical fatigue. The depolarization field in the PZT thin film decreases with increasing the degree of electrical fatigue. We find that the wide-range activation field previously reported in ferroelectric domains result from the change of the depolarization field caused by the electrical fatigue. Domain wall speed exhibits universal behavior to the effective electric field (defined by an applied electric field minus the depolarization field), regardless of the degree of the electrical fatigue

  19. The fatigue in the nuclear boilers

    International Nuclear Information System (INIS)

    Hutin, J.P.

    2001-01-01

    This paper presents the main conclusions concerning the presentations of the 23 november 2000 conference on fatigue damage of nuclear facilities. The author presents also some propositions of research and development programs. (A.L.B.)

  20. Fatigue in Persian Gulf Syndrome - Physiologic Mechanisms

    National Research Council Canada - National Science Library

    Haller, Ronald

    2000-01-01

    ...)Veterans matched for age, height and weight. Serum OK, incidence of elevated OK, and muscle histology and fatigue rate and level of oxygen uptake relative to 02 delivery during forearm exercise were similar in both groups...

  1. Creep-fatigue of low cobalt superalloys

    Science.gov (United States)

    Halford, G. R.

    1982-01-01

    Testing for the low cycle fatigue and creep fatigue resistance of superalloys containing reduced amounts of cobalt is described. The test matrix employed involves a single high temperature appropriate for each alloy. A single total strain range, again appropriate to each alloy, is used in conducting strain controlled, low cycle, creep fatigue tests. The total strain range is based upon the level of straining that results in about 10,000 cycles to failure in a high frequency (0.5 Hz) continuous strain-cycling fatigue test. No creep is expected to occur in such a test. To bracket the influence of creep on the cyclic strain resistance, strain hold time tests with ore minute hold periods are introduced. One test per composition is conducted with the hold period in tension only, one in compression only, and one in both tension and compression. The test temperatures, alloys, and their cobalt compositions that are under study are given.

  2. Cognitive fatigue in patients with myasthenia gravis.

    Science.gov (United States)

    Jordan, Berit; Schweden, Tabea L K; Mehl, Theresa; Menge, Uwe; Zierz, Stephan

    2017-09-01

    Cognitive fatigue has frequently been reported in myasthenia gravis (MG). However, objective assessment of cognitive fatigability has never been evaluated. Thirty-three MG patients with stable generalized disease and 17 healthy controls underwent a test battery including repeated testing of attention and concentration (d2-R) and Paced Auditory Serial Addition Test. Fatigability was based on calculation of linear trend (LT) reflecting dynamic performance within subsequent constant time intervals. Additionally, fatigue questionnaires were used. MG patients showed a negative LT in second d2-R testing, indicating cognitive fatigability. This finding significantly differed from stable cognitive performance in controls (P fatigue was significantly higher in MG patients compared with controls (P fatigue is not correlated with objective findings. Muscle Nerve 56: 449-457, 2017. © 2016 Wiley Periodicals, Inc.

  3. Fatigue (PDQ®)—Health Professional Version

    Science.gov (United States)

    Expert-reviewed information summary about fatigue, a condition marked by extreme tiredness and inability to function because of lack of energy, often seen as a complication of cancer or its treatment.

  4. Fatigue evaluation in reactor vessel components

    International Nuclear Information System (INIS)

    Mattar Neto, Miguel; Miranda, Carlos A. de J.

    1994-01-01

    This paper presents a sequence of increasing complexity forms of evaluating fatigue damage of nuclear pressure vessel components caused by cycling loadings. Examples are included in order to illustrate such procedures. (author)

  5. Strand Plasticity Governs Fatigue in Colloidal Gels

    Science.gov (United States)

    van Doorn, Jan Maarten; Verweij, Joanne E.; Sprakel, Joris; van der Gucht, Jasper

    2018-05-01

    The repeated loading of a solid leads to microstructural damage that ultimately results in catastrophic material failure. While posing a major threat to the stability of virtually all materials, the microscopic origins of fatigue, especially for soft solids, remain elusive. Here we explore fatigue in colloidal gels as prototypical inhomogeneous soft solids by combining experiments and computer simulations. Our results reveal how mechanical loading leads to irreversible strand stretching, which builds slack into the network that softens the solid at small strains and causes strain hardening at larger deformations. We thus find that microscopic plasticity governs fatigue at much larger scales. This gives rise to a new picture of fatigue in soft thermal solids and calls for new theoretical descriptions of soft gel mechanics in which local plasticity is taken into account.

  6. Recent Advances in High Cycle Fatigue

    National Research Council Canada - National Science Library

    Nicholas, Ted

    2003-01-01

    .... In this paper, in addition to developing approaches for predicting fatigue limits under various mean stresses and biaxial stress states, methods are presented for accounting for service-induced damage...

  7. Multiple Surveys of Students and Survey Fatigue

    Science.gov (United States)

    Porter, Stephen R.; Whitcomb, Michael E.; Weitzer, William H.

    2004-01-01

    This chapter reviews the literature on survey fatigue and summarizes a research project that indicates that administering multiple surveys in one academic year can significantly suppress response rates in later surveys. (Contains 4 tables.)

  8. La participation des femmes à la vie politique se traduit par des ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    La participation des femmes à la vie politique se traduit par des économies locales plus vigoureuses. 08 juin 2016. Image. Des femmes assistent à une réunion d'un groupe d'entraide près d'. Edgard Rodriguez - IDRC. Des femmes assistent à une réunion d'un groupe d'entraide près d'Hyderabad, en Inde. Keenara ...

  9. statut de la matiere organique des cambisols et des lixisols sous

    African Journals Online (AJOL)

    Administrateur

    L'étude vise à évaluer la matière organique des Cambisols et des Lixisols sous formations naturelles de longue durée en zone climatique nord-soudanienne et à établir, les relations entre ... sont supérieures à celles des sols des zones sahélienne et sud-soudanienne. ... globale a eu une corrélation positive avec le pH.

  10. Renforcement de l'autonomie des collectivités au moyen des ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Cette subvention permettra au ministère des Communications et des Technologies de l'information de l'Égypte ainsi qu'au fonds spécial réservé aux TI de consolider le modèle actuel des clubs de TI en Égypte, par l'entremise de services d'assistance sur demande, d'activités de formation à l'intention du personnel des ...

  11. Accès à l'eau : des solutions techniques et sociales aident des ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Grâce à la modélisation par ordinateur faisant appel à des techniques de pointe et à la consultation des collectivités, l'organisme bolivien Agua Sustentable a trouvé des solutions politiques à des conflits qui auraient pu s'avérer désastreux au sujet de l'accès à l'eau. Cet organisme de recherche subventionné par le CRDI a ...

  12. Connaissances, attitudes et pratiques des prestataires de santé des ...

    African Journals Online (AJOL)

    ... des prestataires interrogés avaient respectivement une bonne connaissance des facteurs de risque et des moyens de dépistage. Les signes évocateurs et les examens complémentaires nécessaires au diagnostic du cancer du sein étaient connus par 15,3 % des prestataires. La définition du cancer du sein et les moyens ...

  13. Incidence des prix et des taxes sur la consommation de produits du ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Incidence des prix et des taxes sur la consommation de produits du tabac en Argentine, en Bolivie et au Chili. Partout en Amérique du Sud, les adultes et les enfants font une grande consommation de tabac. Un nouveau projet de recherche se penchera sur les avantages et les limites des stratégies de fixation des prix et de ...

  14. La production mondiale des vins

    Directory of Open Access Journals (Sweden)

    Pierre GALET

    1969-09-01

     Le continent européen constitue le principal foyer de la culture de la vigne. Il vient en tête, non seulement par l'importance de la superficie cultivée, mais également par le volume global de la récolte et par la qualité des produits qui y sont récoltés : vins fins rouges, rosés et blancs, vins mousseux, vins de dessert ou vins généreux, eaux-de-vie, raisins de table frais et raisins secs. Les pays européens sont également les principaux consommateurs de vins du monde et la majeure partie des échanges commerciaux se font vers l'Europe ou partent de ce continent.

  15. Poser et reposer des choix.

    Directory of Open Access Journals (Sweden)

    Corinne Van Hauwermeiren- Echement

    2009-10-01

    Full Text Available IntroductionEn 1955, le legs de la collection Franckignoul – composée notamment d’un ensemble de quatre panneaux du XVIe siècle – vient enrichir les collections du Musée des Beaux-Arts de la Ville de Liège (Belgique. La fermeture de ce dernier en 1976 débouche sur  la scission des collections. Une partie est donnée au Musée de l’Art Wallon, l’autre partie allant au Musée d’Art Moderne et d’Art Contemporain (Mamac. Toutes les œuvres n’entrant pas dans ces deux collections sont reléguées en r...

  16. Fatigue sensation induced by the sounds associated with mental fatigue and its related neural activities: revealed by magnetoencephalography

    OpenAIRE

    Ishii, Akira; Tanaka, Masaaki; Iwamae, Masayoshi; Kim, Chongsoo; Yamano, Emi; Watanabe, Yasuyoshi

    2013-01-01

    Background It has been proposed that an inappropriately conditioned fatigue sensation could be one cause of chronic fatigue. Although classical conditioning of the fatigue sensation has been reported in rats, there have been no reports in humans. Our aim was to examine whether classical conditioning of the mental fatigue sensation can take place in humans and to clarify the neural mechanisms of fatigue sensation using magnetoencephalography (MEG). Methods Ten and 9 healthy volunteers particip...

  17. Gut inflammation in chronic fatigue syndrome

    OpenAIRE

    Lakhan, Shaheen E; Kirchgessner, Annette

    2010-01-01

    Abstract Chronic fatigue syndrome (CFS) is a debilitating disease characterized by unexplained disabling fatigue and a combination of accompanying symptoms the pathology of which is incompletely understood. Many CFS patients complain of gut dysfunction. In fact, patients with CFS are more likely to report a previous diagnosis of irritable bowel syndrome (IBS), a common functional disorder of the gut, and experience IBS-related symptoms. Recently, evidence for interactions between the intestin...

  18. Soil Fatigue Due To Cyclically Loaded Foundations

    OpenAIRE

    Pytlik, Robert Stanislaw

    2016-01-01

    Cyclic loading on civil structures can lead to a reduction of strength of the used materials. A literature study showed that, in contrast to steel structures and material engineering, there are no design codes or standards for fatigue of foundations and the surrounding ground masses in terms of shear strength reduction. Scientific efforts to study the fatigue behaviour of geomaterials are mainly focused on strain accumulation, while the reduction of shear strength of geomaterials has not been...

  19. Improvement of fatigue properties of orthotropic decks

    Czech Academy of Sciences Publication Activity Database

    Frýba, Ladislav; Urushadze, Shota

    2011-01-01

    Roč. 33, č. 4 (2011), s. 1166-1169 ISSN 0141-0296 R&D Projects: GA ČR GA103/08/1340; GA MŠk(CZ) 7E08098 Grant - others:BRIFAG -Bridge Fatigue Guidance(XE) RFSR_CT-2008-00033 Institutional research plan: CEZ:AV0Z20710524 Keywords : orthotropic deck * fatigue * prolonged life Subject RIV: JM - Building Engineering Impact factor: 1.351, year: 2011

  20. Computer simulation of fatigue under diametrical compression

    OpenAIRE

    Carmona, H. A.; Kun, F.; Andrade Jr., J. S.; Herrmann, H. J.

    2006-01-01

    We study the fatigue fracture of disordered materials by means of computer simulations of a discrete element model. We extend a two-dimensional fracture model to capture the microscopic mechanisms relevant for fatigue, and we simulate the diametric compression of a disc shape specimen under a constant external force. The model allows to follow the development of the fracture process on the macro- and micro-level varying the relative influence of the mechanisms of damage accumulation over the ...

  1. Material fatigue in high pressure piping

    Energy Technology Data Exchange (ETDEWEB)

    Brunne, W.C. [Pro Novum, Research and Technological Services, Ltd, Katowice, (Poland)

    1998-12-31

    The present paper describes a type of damage to four-way cross pieces on live steam and reheated steam pipelines. The results of metallographic examination and strength tests are presented. The occurring mechanisms of material degradation, i.e. low-cycle fatigue and hydrogen corrosion are discussed. The both mechanisms result in the corrosion fatigue of the material causing the failure of cross pieces. A new design of cross piece was proposed. (orig.) 5 refs.

  2. Damage evolution during fatigue in structural materials

    Czech Academy of Sciences Publication Activity Database

    Polák, Jaroslav; Man, Jiří; Petrenec, Martin

    2012-01-01

    Roč. 1, August (2012), s. 3-12 ISSN 2211-8128. [International Congress on Metallurgy and Materials - SAM/CONAMET 2011 /11./. Rosario, 18.10.2011-21.10.2011] R&D Projects: GA ČR GA106/09/1954 Institutional support: RVO:68081723 Keywords : cyclic plasticity * crack nucleation * crack growth * fatigue damage Subject RIV: JL - Materials Fatigue, Friction Mechanics

  3. Fatigue in Breakwater Concrete Armour Units

    DEFF Research Database (Denmark)

    Burcharth, Hans F.

    The reliability of rubble mound breakwaters depends on the hydraulic stability and the mechanical strength of the armour units. The paper deals with the important aspect of fatigue related to the strength of concrete armour units.......The reliability of rubble mound breakwaters depends on the hydraulic stability and the mechanical strength of the armour units. The paper deals with the important aspect of fatigue related to the strength of concrete armour units....

  4. (TEC) et ciblage des pauvres au Mali

    International Development Research Centre (IDRC) Digital Library (Canada)

    Comment est-ce que c'est vrai. La preuve par … □ Différentiel de ciblage entre P et NP. □ Part normalisée de consommation/achat des Pauvres. □ Part normalisée de la pression fiscale. (totale et de porte) sur les achats des P. □ Part normalisée des "exonérations" revenant aux Pauvres ...

  5. ETUDE DE LA DISTRIBUTION DES CATIONS ECHANGEABLES

    African Journals Online (AJOL)

    SEI Joseph

    programme d'installations minières pour l'exploitation de l'or et du manganèse, intéressant des emprises foncières importantes. ... pour maitriser les risques liés aux sols pollués, lesquels peuvent conduire à des effets négatifs sur le long terme Meusy, & Giorni .... kaolinite et de type bentonite industrielle (SFBD). Le pH des ...

  6. Dynamik des Kaufverhaltens im Bio-Sortiment

    OpenAIRE

    Buder, Fabian; Hamm, Ulrich; Bickel, Malte; Bien, Barbara; Michels, Paul

    2010-01-01

    Das Gesamtziel des vorliegenden Forschungsprojekts war es, eine detaillierte Informationsgrundlage zum tatsächlichen Kaufverhalten von deutschen Haushalten bei ökologischen Lebensmitteln auf der Basis von Haushaltspaneldaten zu erstellen. Dazu sollten zum einen relevante Aspekte des Kaufverhaltens von Haushalten bei Öko-Lebensmitteln im Zeitverlauf von 2004 bis 2008 analysiert und zum anderen die Einflussfaktoren des Kaufverhaltens bei Öko-Lebensmitteln für das Jahr 2008 identifiziert werden....

  7. Revision des Symphurus du Siboga

    NARCIS (Netherlands)

    Chabanaud, Paul

    1955-01-01

    Ce m’est un devoir particulièrement agréable que de saisir l’occasion de ce petit mémoire pour remercier M. L. F. DE BEAUFORT, M. H. ENGEL, Directeur du Zoologisch Museum, ainsi que M. J. J. HOEDEMAN de l’accueil qu’à diverses reprises, j’ai reçu de leur part, au Zoölogisch Museum, et aussi des

  8. Contribution des TICs à l'abandon des mutilations génitales ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Contribution des TIC à l'abandon des MGF en Afrique de l'Ouest francophone : rôle des jeunes citoyennes; rapport technique no. 5 (rapport technique final), 18 octobre 2008 - 31 mars 2009. Download PDF. Related content. New website will help record vital life events to improve access to services for all. A new website ...

  9. Etat des lieux de la gestion des insecticides au Togo, Afrique de l ...

    African Journals Online (AJOL)

    Pour parvenir à une gestion optimale des maladies à transmission vectorielle ou tout au moins la nuisance culicidienne, une surveillance permanente des facteurs de risque devient nécessaire. Le principal facteur de risque est le vecteur qui transmet la maladie, et le contrôle du vecteur passe par des stratégies de lutte qui ...

  10. Ethnobotanique des plantes médicinales anti hémorroïdaires des ...

    African Journals Online (AJOL)

    SARAH

    2015-12-31

    Dec 31, 2015 ... but est de valoriser la médecine à base des plantes dans le traitement des pathologies ... médicinales anti hémorroïdaires et le coût réduit des recettes serait pour les populations démunies, ...... l'Afrique, Unesco/Aetfat/Unso.

  11. Understanding Muscle Dysfunction in Chronic Fatigue Syndrome

    Directory of Open Access Journals (Sweden)

    Gina Rutherford

    2016-01-01

    Full Text Available Introduction. Chronic fatigue syndrome/myalgic encephalomyelitis (CFS/ME is a debilitating disorder of unknown aetiology, characterised by severe disabling fatigue in the absence of alternative diagnosis. Historically, there has been a tendency to draw psychological explanations for the origin of fatigue; however, this model is at odds with findings that fatigue and accompanying symptoms may be explained by central and peripheral pathophysiological mechanisms, including effects of the immune, oxidative, mitochondrial, and neuronal pathways. For example, patient descriptions of their fatigue regularly cite difficulty in maintaining muscle activity due to perceived lack of energy. This narrative review examined the literature for evidence of biochemical dysfunction in CFS/ME at the skeletal muscle level. Methods. Literature was examined following searches of PUB MED, MEDLINE, and Google Scholar, using key words such as CFS/ME, immune, autoimmune, mitochondria, muscle, and acidosis. Results. Studies show evidence for skeletal muscle biochemical abnormality in CFS/ME patients, particularly in relation to bioenergetic dysfunction. Discussion. Bioenergetic muscle dysfunction is evident in CFS/ME, with a tendency towards an overutilisation of the lactate dehydrogenase pathway following low-level exercise, in addition to slowed acid clearance after exercise. Potentially, these abnormalities may lead to the perception of severe fatigue in CFS/ME.

  12. La production mondiale des vins

    Directory of Open Access Journals (Sweden)

    Pierre GALET

    1972-06-01

    Full Text Available La culture de la vigne en Autriche remonterait à l'occupation romaine, les premières plantations ayant été faites par les légions romaines de l'empereur Probus, dans la seconde moitié du IIIe siècle (Probus était né à Sirmium près du Danube et il favorisa l'extension des vignobles dans cette région pour approvisionner ses armées. Après la chute de l'empire romain et les invasions des Awares, on doit à Charlemagne le renouveau de la culture de la vigne, notamment dans la Wachau, en Basse- Autriche. Puis plus tard, à chaque avance de la colonisation, les vignes se répandirent sur les bords du Danube et dans les vallées latérales, l'extension étant favorisée par les communautés religieuses catholiques qui devinrent propriétaires de grands vignobles. La navigation sur le fleuve fut également un facteur favorable pour la culture de la vigne. Au XVIe siècle, apogée des cultures, le vin se vendait jusqu'en Pologne et dans les Etats Baltes.

  13. Modalites de consommation et valeur nutritionnelle des ...

    African Journals Online (AJOL)

    Les légumineuses niébé, voandzou et zamnè sont consommées sous forme de ragout et de plats associés à des céréales respectivement par 99%, 93% et 76%. L'arachide et le soja sont utilisés comme des ingrédients ou comme des collations. Les légumineuses ont des teneurs importantes en protéines, 35,76%, 31,04%, ...

  14. Continuous fatigue crack monitoring of bridges: Long-Term Electrochemical Fatigue Sensor (LTEFS)

    Science.gov (United States)

    Moshier, Monty A.; Nelson, Levi; Brinkerhoff, Ryan; Miceli, Marybeth

    2016-04-01

    Fatigue cracks in steel bridges degrade the load-carrying capacity of these structures. Fatigue damage accumulation caused by the repetitive loading of everyday truck traffic can cause small fatigue cracks initiate. Understanding the growth of these fatigue cracks is critical to the safety and reliability of our transportation infrastructure. However, modeling fatigue in bridges is difficult due to the nature of the loading and variations in connection integrity. When fatigue cracks reach critical lengths failures occur causing partial or full closures, emergency repairs, and even full structural failure. Given the aging US highway and the trend towards asset management and life extension, the need for reliable, cost effective sensors and monitoring technologies to alert bridge owners when fatigue cracks are growing is higher than ever. In this study, an innovative Long-Term Electrochemical Fatigue Sensor (LTEFS) has been developed and introduced to meet the growing NDT marketplace demand for sensors that have the ability to continuously monitor fatigue cracks. The performance of the LTEFS has been studied in the laboratory and in the field. Data was collected using machined specimens with different lengths of naturally initiated fatigue cracks, applied stress levels, applied stress ratios, and for both sinusoidal and real-life bridge spectrum type loading. The laboratory data was evaluated and used to develop an empirically based algorithm used for crack detection. Additionally, beta-tests on a real bridge structure has been completed. These studies have conclusively demonstrated that LTEFS holds great potential for long-term monitoring of fatigue cracks in steel structures

  15. EFFET DES TRAITEMENTS THERMIQUES SUR LA REACTION ENTRE DES COUCHES MINCES DE TITANE ET DES SUBSTRATS EN ACIER

    Directory of Open Access Journals (Sweden)

    D Slimani

    2015-06-01

    Full Text Available Des couches minces du titane pur ont été déposées avec la méthode de pulvérisation cathodique sur des substrats en acier, type FF80 K-1 contenants ~1% mass. en carbone. La réaction entre les deux parties du système substrat-couche mince est activée avec des traitements thermiques sous vide dans l’intervalle de températures de 400 à900°Cpendant 30 minutes. Les Spectres de diffraction de rayons x confirment l’inter- diffusion des éléments  chimiques du système résultants la formation et la croissance des nouvelles phases en particulier le carbure binaire TiC ayant des caractéristiques thermomécaniques importantes. L’analyse morphologique des échantillons traités  avec le microscope électronique à balayage (MEB montre l’augmentation du flux de diffusion atomique avec la température de recuit, notamment la diffusion du manganèse et du fer vers la surface libre des échantillons aux températures élevées provoquant la dégradation des propriétés mécaniques des revêtements contrairement au premiers stades d’interaction où on a obtenu des bonnes valeurs de la microdureté.

  16. Développer le leadership dans des villes de l'Amérique latine et des ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Développer le leadership dans des villes de l'Amérique latine et des Caraïbes dans le contexte des changements climatiques. En raison des changements climatiques, de la croissance démographique et de l'urbanisation rapide non planifiée, les villes des pays en développement sont à la fois le principal déclencheur des ...

  17. Exploring nurse leader fatigue: a mixed methods study.

    Science.gov (United States)

    Steege, Linsey M; Pinekenstein, Barbara J; Arsenault Knudsen, Élise; Rainbow, Jessica G

    2017-05-01

    To describe hospital nurse leaders' experiences of fatigue. Fatigue is a critical challenge in nursing. Existing literature focuses on staff nurse fatigue, yet nurse leaders are exposed to high demands that may contribute to fatigue and associated risks to patient, nurse and organisational outcomes. A mixed method approach comprising semi-structured interviews and the Occupational Fatigue Exhaustion Recovery scale with 21 nurse administrators (10 nurse managers and 11 nurse executives) from hospitals in a Midwestern state. Most nurse leaders experience fatigue; nurse managers reported higher levels of chronic fatigue. Participants identified multiple sources of fatigue including 24 h accountability and intensity of role expectations, and used a combination of wellness, restorative, social support and boundary setting strategies to cope with fatigue. The consequences of nurse leader fatigue include an impact on decision-making, work-life balance and turnover intent. The high prevalence of nurse leader fatigue could impact the turnover intent of nurse administrators and quality of care. This study highlights the significance and consequences of nurse leader fatigue. As health care organisations continue to raise awareness and establish systems to reduce nurse fatigue, policies and programmes must be adapted to address nurse leader fatigue. © 2017 John Wiley & Sons Ltd.

  18. Prior Mental Fatigue Impairs Marksmanship Decision Performance

    Directory of Open Access Journals (Sweden)

    James Head

    2017-09-01

    Full Text Available Purpose: Mental fatigue has been shown to impair subsequent physical performance in continuous and discontinuous exercise. However, its influence on subsequent fine-motor performance in an applied setting (e.g., marksmanship for trained soldiers is relatively unknown. The purpose of this study was to investigate whether prior mental fatigue influences subsequent marksmanship performance as measured by shooting accuracy and judgment of soldiers in a live-fire scenario.Methods: Twenty trained infantry soldiers engaged targets after completing either a mental fatigue or control intervention in a repeated measure design. Heart rate variability and the NASA-TLX were used to gauge physiological and subjective effects of the interventions. Target hit proportion, projectile group accuracy, and precision were used to measure marksmanship accuracy. Marksmanship accuracy was assessed by measuring bullet group accuracy (i.e., how close a group of shots are relative to center of mass and bullet group precision (i.e., how close are each individual shot to each other. Additionally, marksmanship decision accuracy (correctly shooting vs. correctly withholding shot when engaging targets was used to examine marksmanship performance.Results: Soldiers rated the mentally fatiguing task (59.88 ± 23.7 as having greater mental workload relative to the control intervention [31.29 ± 12.3, t(19 = 1.72, p < 0.001]. Additionally, soldiers completing the mental fatigue intervention (96.04 ± = 37.1 also had lower time-domain (standard deviation of normal to normal R-R intervals heart rate variability relative to the control [134.39 ± 47.4, t(18 = 3.59, p < 0.001]. Projectile group accuracy and group precision failed to show differences between interventions [t(19 = 0.98, p = 0.34, t(19 = 0.18, p = 0.87, respectively]. Marksmanship decision errors significantly increased after soldiers completed the mental fatigue intervention (48% ± 22.4 relative to the control

  19. Factors related to fatigue; priority of interventions to reduce or eliminate fatigue and the exploration of a multidisciplinary research model for further study of fatigue

    NARCIS (Netherlands)

    Tiesinga, LJ; Dassen, TWN; Halfens, RJG; van den Heuvel, WJA

    A growing interest in the health problem presented by fatigue, both in clinical practice and research, coupled with a decreasing number of reported studies on fatigue in the last decade, make an updated and systematic review of factors related to fatigue necessary. A search of the literature,

  20. Low cycle fatigue: high cycle fatigue damage accumulation in a 304L austenitic stainless steel

    International Nuclear Information System (INIS)

    Lehericy, Y.

    2007-05-01

    The aim of this study was to evaluate the consequences of a Low Cycle Fatigue pre-damage on the subsequent fatigue limit of a 304L stainless steel. The effects of hardening and severe roughness (grinding) have also been investigated. In a first set of tests, the evolution of the surface damage induced by the different LCF pre-cycling was characterized. This has permitted to identify mechanisms and kinetics of damage in the plastic domain for different surface conditions. Then, pre-damaged samples were tested in the High Cycle Fatigue domain in order to establish the fatigue limits associated with each level of pre-damage. Results evidence that, in the case of polished samples, an important number of cycles is required to initiate surface cracks ant then to affect the fatigue limit of the material but, in the case of ground samples, a few number of cycles is sufficient to initiate cracks and to critically decrease the fatigue limit. The fatigue limit of pre-damaged samples can be estimated using the stress intensity factor threshold. Moreover, this detrimental effect of severe surface conditions is enhanced when fatigue tests are performed under a positive mean stress (author)