WorldWideScience

Sample records for fast transients craft

  1. Fast thermal transients on valve

    International Nuclear Information System (INIS)

    Ferjancic, M.; Stok, B.; Halilovic, M.; Koc, P.; Mole, N.; Otrin, Z.; Kotar, A.

    2007-01-01

    One of the regulatory body methods to supervise nuclear safety of a nuclear power plant is a review of plant modifications and evaluation of their impact on plant operating experience. The Slovenian Nuclear Safety Administration (SNSA) licensed in April 2003 the use of leak-before-break (LBB) methodology in the Krsko NPP for the primary loop including surge line and connecting pipelines with minimal diameter of 6 inch. The SNSA decision based also on fracture mechanics analyses that include direct pipe failure mechanisms such as water hammer, creep damage, erosion and corrosion, fatigue and environmental conditions over the entire life of the plant. The evaluation of the operating transients pointed out, that presumed loadings, used for the LBB analysis, did not incorporate all the fast thermal transients data. For that purpose the SNSA requested Faculty of Mechanical Engineering (FS) in Ljubljana to perform additional analyses. The results of the analysis shall confirm the validity of the LBB analysis. (author)

  2. CRAFT

    DEFF Research Database (Denmark)

    Gammelgaard Nielsen, Anders

    2012-01-01

    At the Aarhus School of Architecture, Associate Professor Anders Gammelgaard has erected a solid wood construction, based on traditional craftsmanship. The entire structure is made of heavy oak timber that is joined together using the old techniques of tongue and groove and dowels. The motivation......-air museums, as a performing art in front of an audience. In this article the author discusses the importance of craft and craftsmanship in contemporary architecture in relation to its users....

  3. Measurement of fast transient pressures

    International Nuclear Information System (INIS)

    Procaccia, Henri

    1978-01-01

    The accuracy, reliability and sensitivity of a pressure transducers define its principal static characteristics. When the quantity measured varies with time, the measurement carries a dynamic error and a delay depending on the frequency of this variation. Hence, when fast pressure changes in a fluid have to be determined, different kinds of pressure transducers can be used depending on their inherent dynamic characteristics which must be compared with those of the transient phenomenon to be analysed. The text describes the pressure transducers generally employed in industry for analysing such phenomenon and gives two practical applications developed in the EDF: the first submits the measurements and results of pump cavitation tests carried out at the Vitry II EDF power station; the second deals with hammer blows particularly noticed in nuclear power stations and required the use of transducers of exceptionally high performance such as strain gauge transducers and piezoelectric transducers (response time within 1m sec.) [fr

  4. Fission gas behavior during fast thermal transients

    International Nuclear Information System (INIS)

    Esteves, R.G.

    1976-01-01

    The behavior of non-equilibrium fission in fuel elements undergoing fast thermal transients is analyzed. To facilitate the analysis, a new variable, the equilibrium variable (EV) is defined. This variable, together with bubble radius, completely specifies a bubble with respect to its size and equilibrium condition. The analysis is coded using a two-variable (radius and EV) multigroup numerical approximation that accepts as input the time-temperature history, the time-fission rate history, and the time-thermal gradient history of the fuel element. Studies were performed to test the code for convergence with respect to the time interval and the number of groups chosen. For a series of transient simulation studies, the measurements obtained at HEDL (microscopic examination of intragranular porosity in oxide fuel transient-tested in TREAT) are used. Two different transient histories were selected; the first, a high-temperature transient (HTT) with a peak at 2477 0 K and the second, a low-temperature transient (LTT) with a peak-temperature at 2000 0 K. The LTT was simulated for three different conditions: Bubbles were allowed to move via (a) only biased migration, (b) via random migration, and (c) via both mechanisms. The HTT was also run for both mechanisms. The agreement with HEDL microscopic observations was fair for bubbles smaller than 964 A in diameter, and poor for larger bubbles. Bubbles that grew during the heat-up part of the transient were frozen at a larger size during the cool down

  5. The fast transient sky with Gaia

    Science.gov (United States)

    Wevers, Thomas; Jonker, Peter G.; Hodgkin, Simon T.; Kostrzewa-Rutkowska, Zuzanna; Harrison, Diana L.; Rixon, Guy; Nelemans, Gijs; Roelens, Maroussia; Eyer, Laurent; van Leeuwen, Floor; Yoldas, Abdullah

    2018-01-01

    The ESA Gaia satellite scans the whole sky with a temporal sampling ranging from seconds and hours to months. Each time a source passes within the Gaia field of view, it moves over 10 charge coupled devices (CCDs) in 45 s and a light curve with 4.5 s sampling (the crossing time per CCD) is registered. Given that the 4.5 s sampling represents a virtually unexplored parameter space in optical time domain astronomy, this data set potentially provides a unique opportunity to open up the fast transient sky. We present a method to start mining the wealth of information in the per CCD Gaia data. We perform extensive data filtering to eliminate known onboard and data processing artefacts, and present a statistical method to identify sources that show transient brightness variations on ≲2 h time-scales. We illustrate that by using the Gaia photometric CCD measurements, we can detect transient brightness variations down to an amplitude of 0.3 mag on time-scales ranging from 15 s to several hours. We search an area of ∼23.5 deg2 on the sky and find four strong candidate fast transients. Two candidates are tentatively classified as flares on M-dwarf stars, while one is probably a flare on a giant star and one potentially a flare on a solar-type star. These classifications are based on archival data and the time-scales involved. We argue that the method presented here can be added to the existing Gaia Science Alerts infrastructure for the near real-time public dissemination of fast transient events.

  6. FAST: An advanced code system for fast reactor transient analysis

    International Nuclear Information System (INIS)

    Mikityuk, Konstantin; Pelloni, Sandro; Coddington, Paul; Bubelis, Evaldas; Chawla, Rakesh

    2005-01-01

    One of the main goals of the FAST project at PSI is to establish a unique analytical code capability for the core and safety analysis of advanced critical (and sub-critical) fast-spectrum systems for a wide range of different coolants. Both static and transient core physics, as well as the behaviour and safety of the power plant as a whole, are studied. The paper discusses the structure of the code system, including the organisation of the interfaces and data exchange. Examples of validation and application of the individual programs, as well as of the complete code system, are provided using studies carried out within the context of designs for experimental accelerator-driven, fast-spectrum systems

  7. The LOFAR pilot surveys for pulsars and fast radio transient

    NARCIS (Netherlands)

    Coenen, T.; van Leeuwen, J.; Hessels, J.W.T.; et al., [Unknown; Alexov, A.; van der Horst, A.; Law, C.; Rowlinson, A.; Swinbank, J.

    2014-01-01

    We have conducted two pilot surveys for radio pulsars and fast transients with the Low-Frequency Array (LOFAR) around 140 MHz and here report on the first low-frequency fast-radio burst limit and the discovery of two new pulsars. The first survey, the LOFAR Pilot Pulsar Survey (LPPS), observed a

  8. The LOFAR pilot surveys for pulsars and fast radio transients

    NARCIS (Netherlands)

    Coenen, T.J.; van Leeuwen, J.; Hessels, J.W.T.; Stappers, B.W.; Kondratiev, V.I.; Alexov, A.; Breton, R.P.; Bilous, A.; Cooper, S.; Falcke, H.; Fallows, R.A.; Gajjar, V.; Griessmeier, J.M.; Hassall, T.E.; Bentum, Marinus Jan

    2014-01-01

    We have conducted two pilot surveys for radio pulsars and fast transients with the Low-Frequency Array (LOFAR) around 140 MHz and here report on the first low-frequency fast-radio burst limit and the discovery of two new pulsars. The first survey, the LOFAR Pilot Pulsar Survey (LPPS), observed a

  9. Fast relaxation transients in a kicked damped oscillator

    Energy Technology Data Exchange (ETDEWEB)

    Urquizu, Merce [Laboratori d' Estudis Geofisics ' Eduard Fontsere' , IEC, Barcelona (Spain); Correig, Antoni M. [Departament d' Astronomical i Meteorologia, Laboratori d' Estudis Geofisics Eduard Fontsere, UB Marti Franques 1, E-08028 Barcelona (Spain) and Laboratori d' Estudis Geofisics ' Eduard Fontsere' , IEC, Barcelona (Spain)]. E-mail: ton.correig@am.ub.es

    2007-08-15

    Although nonlinear relaxation transients are very common in nature, very few studies are devoted to its characterization, mainly due to its short time duration. In this paper, we present a study about the nature of relaxation transients in a kicked damped oscillator, in which transients are generated in terms of continuous fast changes in the parameters of the system. We have found that transient dynamics can be described, rather than in terms of bifurcation dynamics, in terms of instantaneous stretching factors, which are related to the stability of fixed points of the corresponding stroboscopic maps.

  10. Liquid metal fast reactor transient design

    International Nuclear Information System (INIS)

    Horak, C.; Purvis, E. III

    2000-01-01

    An examination has been made of how the currently available computing capabilities could be used to reduce Liquid Metal Fast Reactor design, manufacturing, and construction cost. While the examination focused on computer analyses some other promising means to reduce costs were also examined. (author)

  11. Transient coupled calculations of the Molten Salt Fast Reactor using the Transient Fission Matrix approach

    Energy Technology Data Exchange (ETDEWEB)

    Laureau, A., E-mail: laureau.axel@gmail.com; Heuer, D.; Merle-Lucotte, E.; Rubiolo, P.R.; Allibert, M.; Aufiero, M.

    2017-05-15

    Highlights: • Neutronic ‘Transient Fission Matrix’ approach coupled to the CFD OpenFOAM code. • Fission Matrix interpolation model for fast spectrum homogeneous reactors. • Application for coupled calculations of the Molten Salt Fast Reactor. • Load following, over-cooling and reactivity insertion transient studies. • Validation of the reactor intrinsic stability for normal and accidental transients. - Abstract: In this paper we present transient studies of the Molten Salt Fast Reactor (MSFR). This generation IV reactor is characterized by a liquid fuel circulating in the core cavity, requiring specific simulation tools. An innovative neutronic approach called “Transient Fission Matrix” is used to perform spatial kinetic calculations with a reduced computational cost through a pre-calculation of the Monte Carlo spatial and temporal response of the system. Coupled to this neutronic approach, the Computational Fluid Dynamics code OpenFOAM is used to model the complex flow pattern in the core. An accurate interpolation model developed to take into account the thermal hydraulics feedback on the neutronics including reactivity and neutron flux variation is presented. Finally different transient studies of the reactor in normal and accidental operating conditions are detailed such as reactivity insertion and load following capacities. The results of these studies illustrate the excellent behavior of the MSFR during such transients.

  12. Transient coupled calculations of the Molten Salt Fast Reactor using the Transient Fission Matrix approach

    International Nuclear Information System (INIS)

    Laureau, A.; Heuer, D.; Merle-Lucotte, E.; Rubiolo, P.R.; Allibert, M.; Aufiero, M.

    2017-01-01

    Highlights: • Neutronic ‘Transient Fission Matrix’ approach coupled to the CFD OpenFOAM code. • Fission Matrix interpolation model for fast spectrum homogeneous reactors. • Application for coupled calculations of the Molten Salt Fast Reactor. • Load following, over-cooling and reactivity insertion transient studies. • Validation of the reactor intrinsic stability for normal and accidental transients. - Abstract: In this paper we present transient studies of the Molten Salt Fast Reactor (MSFR). This generation IV reactor is characterized by a liquid fuel circulating in the core cavity, requiring specific simulation tools. An innovative neutronic approach called “Transient Fission Matrix” is used to perform spatial kinetic calculations with a reduced computational cost through a pre-calculation of the Monte Carlo spatial and temporal response of the system. Coupled to this neutronic approach, the Computational Fluid Dynamics code OpenFOAM is used to model the complex flow pattern in the core. An accurate interpolation model developed to take into account the thermal hydraulics feedback on the neutronics including reactivity and neutron flux variation is presented. Finally different transient studies of the reactor in normal and accidental operating conditions are detailed such as reactivity insertion and load following capacities. The results of these studies illustrate the excellent behavior of the MSFR during such transients.

  13. Transient phenomena in bounded fast multiplying assemblies

    International Nuclear Information System (INIS)

    Kraft, T.E.

    1976-01-01

    A generalized dispersion formalism is developed in the context of time-, space-, and energy-dependent transport theory. The evolution of the neutron population in a fast multiplying system following an initial burst of neutrons is examined. The generalized dispersion law obtained is an integral equation, in one variable, for the Laplace and Fourier transformed time- and space-dependent sources of fission neutrons. An approximation technique is shown to generate solutions which converge in L 2 norm to the exact solution for exact elastic, exact inelastic, Goertzel-Grueling or Wigner scattering kernels, and any reasonable fission spectrum

  14. LAMPF first-fault identifier for fast transient faults

    International Nuclear Information System (INIS)

    Swanson, A.R.; Hill, R.E.

    1979-01-01

    The LAMPF accelerator is presently producing 800-MeV proton beams at 0.5 mA average current. Machine protection for such a high-intensity accelerator requires a fast shutdown mechanism, which can turn off the beam within a few microseconds of the occurrence of a machine fault. The resulting beam unloading transients cause the rf systems to exceed control loop tolerances and consequently generate multiple fault indications for identification by the control computer. The problem is to isolate the primary fault or cause of beam shutdown while disregarding as many as 50 secondary fault indications that occur as a result of beam shutdown. The LAMPF First-Fault Identifier (FFI) for fast transient faults is operational and has proven capable of first-fault identification. The FFI design utilized features of the Fast Protection System that were previously implemented for beam chopping and rf power conservation. No software changes were required

  15. The excess radio background and fast radio transients

    International Nuclear Information System (INIS)

    Kehayias, John; Kephart, Thomas W.; Weiler, Thomas J.

    2015-01-01

    In the last few years ARCADE 2, combined with older experiments, has detected an additional radio background, measured as a temperature and ranging in frequency from 22 MHz to 10 GHz, not accounted for by known radio sources and the cosmic microwave background. One type of source which has not been considered in the radio background is that of fast transients (those with event times much less than the observing time). We present a simple estimate, and a more detailed calculation, for the contribution of radio transients to the diffuse background. As a timely example, we estimate the contribution from the recently-discovered fast radio bursts (FRBs). Although their contribution is likely 6 or 7 orders of magnitude too small (though there are large uncertainties in FRB parameters) to account for the ARCADE 2 excess, our development is general and so can be applied to any fast transient sources, discovered or yet to be discovered. We estimate parameter values necessary for transient sources to noticeably contribute to the radio background

  16. DETECTION OF FAST TRANSIENTS WITH RADIO INTERFEROMETRIC ARRAYS

    International Nuclear Information System (INIS)

    Bhat, N. D. R.; Chengalur, J. N.; Gupta, Y.; Prasad, J.; Roy, J.; Kudale, S. S.; Cox, P. J.; Bailes, M.; Burke-Spolaor, S.; Van Straten, W.

    2013-01-01

    Next-generation radio arrays, including the Square Kilometre Array (SKA) and its pathfinders, will open up new avenues for exciting transient science at radio wavelengths. Their innovative designs, comprising a large number of small elements, pose several challenges in digital processing and optimal observing strategies. The Giant Metre-wave Radio Telescope (GMRT) presents an excellent test-bed for developing and validating suitable observing modes and strategies for transient experiments with future arrays. Here we describe the first phase of the ongoing development of a transient detection system for GMRT that is planned to eventually function in a commensal mode with other observing programs. It capitalizes on the GMRT's interferometric and sub-array capabilities, and the versatility of a new software backend. We outline considerations in the plan and design of transient exploration programs with interferometric arrays, and describe a pilot survey that was undertaken to aid in the development of algorithms and associated analysis software. This survey was conducted at 325 and 610 MHz, and covered 360 deg 2 of the sky with short dwell times. It provides large volumes of real data that can be used to test the efficacies of various algorithms and observing strategies applicable for transient detection. We present examples that illustrate the methodologies of detecting short-duration transients, including the use of sub-arrays for higher resilience to spurious events of terrestrial origin, localization of candidate events via imaging, and the use of a phased array for improved signal detection and confirmation. In addition to demonstrating applications of interferometric arrays for fast transient exploration, our efforts mark important steps in the roadmap toward SKA-era science.

  17. Detection of Fast Transients with Radio Interferometric Arrays

    Science.gov (United States)

    Bhat, N. D. R.; Chengalur, J. N.; Cox, P. J.; Gupta, Y.; Prasad, J.; Roy, J.; Bailes, M.; Burke-Spolaor, S.; Kudale, S. S.; van Straten, W.

    2013-05-01

    Next-generation radio arrays, including the Square Kilometre Array (SKA) and its pathfinders, will open up new avenues for exciting transient science at radio wavelengths. Their innovative designs, comprising a large number of small elements, pose several challenges in digital processing and optimal observing strategies. The Giant Metre-wave Radio Telescope (GMRT) presents an excellent test-bed for developing and validating suitable observing modes and strategies for transient experiments with future arrays. Here we describe the first phase of the ongoing development of a transient detection system for GMRT that is planned to eventually function in a commensal mode with other observing programs. It capitalizes on the GMRT's interferometric and sub-array capabilities, and the versatility of a new software backend. We outline considerations in the plan and design of transient exploration programs with interferometric arrays, and describe a pilot survey that was undertaken to aid in the development of algorithms and associated analysis software. This survey was conducted at 325 and 610 MHz, and covered 360 deg2 of the sky with short dwell times. It provides large volumes of real data that can be used to test the efficacies of various algorithms and observing strategies applicable for transient detection. We present examples that illustrate the methodologies of detecting short-duration transients, including the use of sub-arrays for higher resilience to spurious events of terrestrial origin, localization of candidate events via imaging, and the use of a phased array for improved signal detection and confirmation. In addition to demonstrating applications of interferometric arrays for fast transient exploration, our efforts mark important steps in the roadmap toward SKA-era science.

  18. Cardiac rehabilitation adapted to transient ischaemic attack and stroke (CRAFTS: a randomised controlled trial

    Directory of Open Access Journals (Sweden)

    Blake Catherine

    2009-02-01

    Full Text Available Abstract Background Coronary Heart Disease and Cerebrovascular Disease share many predisposing, modifiable risk factors (hypertension, abnormal blood lipids and lipoproteins, cigarette smoking, physical inactivity, obesity and diabetes mellitus. Lifestyle interventions and pharmacological therapy are recognised as the cornerstones of secondary prevention. Cochrane review has proven the benefits of programmes incorporating exercise and lifestyle counselling in the cardiac disease population. A Cochrane review highlighted as priority, the need to establish feasibility and efficacy of exercise based interventions for Cerebrovascular Disease. Methods A single blind randomised controlled trial is proposed to examine a primary care cardiac rehabilitation programme for adults post transient ischemic attack (TIA and stroke in effecting a positive change in the primary outcome measures of cardiac risk scores derived from Blood Pressure, lipid profile, smoking and diabetic status and lifestyle factors of habitual smoking, exercise and healthy eating participation. Secondary outcomes of interest include health related quality of life as measured by the Hospital Anxiety and Depression Scale, the Stroke Specific Quality of Life scale and WONCA COOP Functional Health Status charts and cardiovascular fitness as measured by a sub-maximal fitness test. A total of 144 patients, over 18 years of age with confirmed diagnosis of ischaemic stroke or TIA, will be recruited from Dublin community stroke services and two tertiary T.I.A clinics. Exclusion criteria will include oxygen dependence, unstable cardiac conditions, uncontrolled diabetes, major medical conditions, claudication, febrile illness, pregnancy or cognitive impairment. Participants will be block-statified, randomly allocated to one of two groups using a pre-prepared computer generated randomisation schedule. Both groups will receive a two hour education class on risk reduction post stroke. The

  19. Modelling of an ULOF transient in a sodium fast reactor

    International Nuclear Information System (INIS)

    Droin, Jean-Baptiste

    2016-01-01

    Within the framework of the Generation IV Sodium-cooled Fast Reactor (SFR) R and D program of CEA (French Commissariat a l'Energie Atomique et aux Energies Alternatives), safety in case of severe accidents is assessed.Such transients are usually simulated with mechanistic codes (such as SAS-SFR and SIMMER III). as a complement to these codes, which give reference accidental transient calculations, a new physico-statistical approach is currently followed by the CEA; its final objective being to derive the variability of the main results of interest for safety. This approach involves a fast-running description of extended accident sequences coupling physical models for the main phenomena to advanced statistical analysis techniques. It enables to perform a large number of simulations in a reasonable computational time and to describe all the possible bifurcations of the accident transient.In this context, this PhD work presents the physical tool (models and results assessment) dedicated to the initiation and primary phases of an Unprotected Loss Of Flow accident (i.e. until the end of sub-assemblies degradation and before large molten pools formation). The accident phenomenology during these phases is described and illustrated by numerous experimental evidences.It is underlined that the features of the new heterogeneous core concept (called CFV of the French ASTRID prototype) leads to different kinds of ULOF transients than those occurring in the previous past homogeneous cores (SuperPhenix, Phenix...). Indeed, its negative void effect drops the nuclear power when sodium heats-up and possibly boils. This enables three types of ULOF transients characterized by various core final states; the first two types leading to final coolable core states in natural circulation flow (the first one in single phase, the second one in stabilized two-phase flow) whereas the core undergoes a flow excursion followed by sub-assemblies degradation in the last type. In this study, a

  20. VLITE-Fast: A Real-time, 350 MHz Commensal VLA Survey for Fast Transients

    Science.gov (United States)

    Kerr, Matthew; Ray, Paul S.; Kassim, Namir E.; Clarke, Tracy; Deneva, Julia; Polisensky, Emil

    2018-01-01

    The VLITE (VLA Low Band Ionosphere and Transient Experiment; http://vlite.nrao.edu) program operates commensally during all Very Large Array observations, collecting data from 320 to 384 MHz. Recently expanded to include 16 antennas, the large field of view and huge time on sky offer good coverage of the transient, low-frequency sky. We describe the VLITE-Fast system, a GPU-based signal processor capable of detecting short (system, techniques for mitigating interference, and initial results from searches for FRBs.

  1. The Swift Supergiant Fast X-ray Transient Project

    Science.gov (United States)

    Romano, P.; Barthelmy, S.; Bozzo, E.; Burrows, D.; Ducci, L.; Esposito, P.; Evans, P.; Kennea, J.; Krimm, H.; Vercellone, S.

    2017-10-01

    We present the Swift Supergiant Fast X-ray Transients project, a systematic study of SFXTs and classical supergiant X-ray binaries (SGXBs) through efficient long-term monitoring of 17 sources including SFXTs and classical SGXBs across more than 4 orders of magnitude in X-ray luminosity on timescales from hundred seconds to years. We derived dynamic ranges, duty cycles, and luminosity distributions to highlight systematic differences that help discriminate between different theoretical models proposed to explain the differences between the wind accretion processes in SFXTs and classical SGXBs. Our follow-ups of the SFXT outbursts provide a steady advancement in the comprehension of the mechanisms triggering the high X-ray level emission of these sources. In particular, the observations of the outburst of the SFXT prototype IGR J17544-2619, when the source reached a peak X-ray luminosity of 3×10^{38} erg s^{-1}, challenged for the first time the maximum theoretical luminosity achievable by a wind-fed neutron star high mass X-ray binary. We propose that this giant outburst was due to the formation of a transient accretion disc around the compact object. We also created a catalogue of over 1000 BAT flares which we use to predict the observability and perspectives with future missions.

  2. FAST RADIO BURSTS AND RADIO TRANSIENTS FROM BLACK HOLE BATTERIES

    Energy Technology Data Exchange (ETDEWEB)

    Mingarelli, Chiara M. F. [TAPIR, MC 350-17, California Institute of Technology, Pasadena, CA 91125 (United States); Levin, Janna [Institute for Strings, Cosmology and Astroparticle Physics (ISCAP), Columbia University, New York, NY 10027 (United States); Lazio, T. Joseph W. [Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA 91109 (United States)

    2015-12-01

    Most black holes (BHs) will absorb a neutron star (NS) companion fully intact without tidal disruption, suggesting the pair will remain dark to telescopes. Even without tidal disruption, electromagnetic (EM) luminosity is generated from the battery phase of the binary when the BH interacts with the NS magnetic field. Originally, the luminosity was expected to be in high-energy X-rays or gamma-rays, however, we conjecture that some of the battery power is emitted in the radio bandwidth. While the luminosity and timescale are suggestive of fast radio bursts (FRBs; millisecond-scale radio transients) NS–BH coalescence rates are too low to make these a primary FRB source. Instead, we propose that the transients form a FRB sub-population, distinguishable by a double peak with a precursor. The rapid ramp-up in luminosity manifests as a precursor to the burst which is 20%–80% as luminous given 0.5 ms timing resolution. The main burst arises from the peak luminosity before the merger. The post-merger burst follows from the NS magnetic field migration to the BH, causing a shock. NS–BH pairs are especially desirable for ground-based gravitational wave (GW) observatories since the pair might not otherwise be detected, with EM counterparts greatly augmenting the scientific leverage beyond the GW signal. The EM signal’s ability to break degeneracies in the parameters encoded in the GW and probe the NS magnetic field strength is quite valuable, yielding insights into open problems in NS magnetic field decay.

  3. FAST RADIO BURSTS AND RADIO TRANSIENTS FROM BLACK HOLE BATTERIES

    International Nuclear Information System (INIS)

    Mingarelli, Chiara M. F.; Levin, Janna; Lazio, T. Joseph W.

    2015-01-01

    Most black holes (BHs) will absorb a neutron star (NS) companion fully intact without tidal disruption, suggesting the pair will remain dark to telescopes. Even without tidal disruption, electromagnetic (EM) luminosity is generated from the battery phase of the binary when the BH interacts with the NS magnetic field. Originally, the luminosity was expected to be in high-energy X-rays or gamma-rays, however, we conjecture that some of the battery power is emitted in the radio bandwidth. While the luminosity and timescale are suggestive of fast radio bursts (FRBs; millisecond-scale radio transients) NS–BH coalescence rates are too low to make these a primary FRB source. Instead, we propose that the transients form a FRB sub-population, distinguishable by a double peak with a precursor. The rapid ramp-up in luminosity manifests as a precursor to the burst which is 20%–80% as luminous given 0.5 ms timing resolution. The main burst arises from the peak luminosity before the merger. The post-merger burst follows from the NS magnetic field migration to the BH, causing a shock. NS–BH pairs are especially desirable for ground-based gravitational wave (GW) observatories since the pair might not otherwise be detected, with EM counterparts greatly augmenting the scientific leverage beyond the GW signal. The EM signal’s ability to break degeneracies in the parameters encoded in the GW and probe the NS magnetic field strength is quite valuable, yielding insights into open problems in NS magnetic field decay

  4. Automatic shape recognition of a fast transient signal

    International Nuclear Information System (INIS)

    Charles, Gilbert.

    1976-01-01

    A system was developed to recognize if the shape of a signal x(t) is similar (or identical) to the one of an element yi(t) of an ensemble S composed by N known signals, that are memorised. x(t) is a time limited T 2 ) give the similarity measure of two signals. To solve the problem of the digital recording of the signals x(t) two devices were realized: a digital-to-analog converter which permits the recording of fast transient signals (band pass>1GHz, sampling-frequency approximately 100GHz, resolution: 9 bits, 576 samples); an automatic attenuator which scales the signal x(t) before the digitalization (the band pass is 70MHz at -1dB). A theoretical analysis permits to determine what must be the resolution of the digital-to-analog converter as a fonction of the signal-caracteristics and of the wanted precision for the calculus of rho 2 [fr

  5. A fast reactor transient analysis methodology for personal computers

    International Nuclear Information System (INIS)

    Ott, K.O.

    1993-01-01

    A simplified model for a liquid-metal-cooled reactor (LMR) transient analysis, in which point kinetics as well as lumped descriptions of the heat transfer equations in all components are applied, is converted from a differential into an integral formulation. All 30 differential balance equations are implicitly solved in terms of convolution integrals. The prompt jump approximation is applied as the strong negative feedback effectively keeps the net reactivity well below prompt critical. After implicit finite differencing of the convolution integrals, the kinetics equation assumes a new form, i.e., the quadratic dynamics equation. In this integral formulation, the initial value problem of typical LMR transients can be solved with large item steps (initially 1 s, later up to 256 s). This then makes transient problems amenable to a treatment on personal computer. The resulting mathematical model forms the basis for the GW-BASIC program LMR transient calculation (LTC) program. The LTC program has also been converted to QuickBASIC. The running time for a 10-h transient overpower transient is then ∼40 to 10 s, depending on the hardware version (286, 386, or 486 with math coprocessors)

  6. [Research of preparation craft of Danshen phenolic acid fast release unit in multi-drug delivery system of Tongmai micro-pellets].

    Science.gov (United States)

    Chen, Bin; Xiao, Wei; Jia, Xiao-Bin; Huang, Yang

    2012-07-01

    To prepare Danshen phenolic acid fast release micro-pellets and study its preparation craft. The factors which could impact yield, extrude shaping, dissolution of Danshen phenolic acid micro-pellets such as wetting agent, drug loading dose, adjuvant, lactose dose, disintegrant, CMS-Na dose and wetting agent dose was investigated. The optimum preparation craft of Danshen phenolic acid fast release micro-pellets was screened out by orhogonal design. Formula of Danshen phenolic acid fast release micro-pellets was calculated as volume dose 50 g. The formula was as follows: principal agent 22.5 g, lactose 5 g, CMS-Na 2 g, MCC 20.5 g, 27 mL 30% ethanol as wetting agent. Extrusion-spheronization was applied. The optimum conditions were screened out as follows: extrusion frequency (25 Hz), spheronization machine frequency (50 Hz), spheronization time (4 min). The process was scientific and rational. The preparation is stable settles basis for multi-drug delivery system of Tongmai micro-pellets.

  7. A fast reactor transient analysis methodology for PCs

    International Nuclear Information System (INIS)

    Ott, K.O.

    1991-10-01

    This Manual describes a PC program for LMR Transient Calculations, LTC, written in GW-BASIC. It calculates the power and temperature trajectories for unscrammed TOP and LOHS transients. The LOF transient treatment is not operational in the GW-BASIC program because of storage limitations. The corresponding mathematical model, which allows a rapid treatment of the kinetics and the various feedback effects, is described in Ref. 1. It is briefly reviewed in Sec. 1. The program structure is outlined in Sec. 2, followed by a more detailed description in Sec. 3. Computational details are presented in Appendix A. A complete listing of the GW-BASIC program is given in Appendix B. Appendix C shows input-echo and output for a TOP sample problem, and Appendix D is a Glossary of all quantities used in the LTC program. The limitations of the GW-BASIC storage (to about 60K) are removed if it is run within Quick-BASIC. This then allows the extension of this program to treat LOF transients. Running LTC in Quick-BASIC permits also larger ''Dimensions'' for TOP and LOHS transients

  8. A Capacitor-Free, Fast Transient Response Linear Voltage Regulator In a 180nm CMOS

    DEFF Research Database (Denmark)

    Deleuran, Alexander N.; Lindbjerg, Nicklas; Pedersen, Martin K.

    2015-01-01

    A 1.8 V capacitor-free linear regulator with fast transient response based on a new topology with a fast and slow regulation loop is presented. The design has been laid out and simulated in a 0.18 µm CMOS process. The design has a low component count and is tailored for system-on-chip integration...

  9. Molten fuel motion during a fast-reactor overpower transient

    International Nuclear Information System (INIS)

    Kolesar, D.C.; Padilla, A. Jr.; Lewis, C.H.; Waltar, A.E.

    1976-01-01

    Mechanistic models for postfailure fuel behavior during hypothetical transient overpower accidents are currently being developed for incorporation into the MELT accident analysis code. A new model for the fuel-coolant interaction and for the motion of fuel in the coolant channel has been developed and incorporated into the MELT-III code. A major limitation of the mechanistic fuel motion model is its dependence on the uniform interaction region of MELT-III. Consequently, a parallel effort is currently in progress to incorporate a non-uniform interaction region into the MELT code. Combination of the fuel motion and the nonuniform interaction region models will provide the framework for development of a mechanistic fuel plateout/blockage model for transient overpower accidents

  10. realfast: Real-time, Commensal Fast Transient Surveys with the Very Large Array

    Science.gov (United States)

    Law, C. J.; Bower, G. C.; Burke-Spolaor, S.; Butler, B. J.; Demorest, P.; Halle, A.; Khudikyan, S.; Lazio, T. J. W.; Pokorny, M.; Robnett, J.; Rupen, M. P.

    2018-05-01

    Radio interferometers have the ability to precisely localize and better characterize the properties of sources. This ability is having a powerful impact on the study of fast radio transients, where a few milliseconds of data is enough to pinpoint a source at cosmological distances. However, recording interferometric data at millisecond cadence produces a terabyte-per-hour data stream that strains networks, computing systems, and archives. This challenge mirrors that of other domains of science, where the science scope is limited by the computational architecture as much as the physical processes at play. Here, we present a solution to this problem in the context of radio transients: realfast, a commensal, fast transient search system at the Jansky Very Large Array. realfast uses a novel architecture to distribute fast-sampled interferometric data to a 32-node, 64-GPU cluster for real-time imaging and transient detection. By detecting transients in situ, we can trigger the recording of data for those rare, brief instants when the event occurs and reduce the recorded data volume by a factor of 1000. This makes it possible to commensally search a data stream that would otherwise be impossible to record. This system will search for millisecond transients in more than 1000 hr of data per year, potentially localizing several Fast Radio Bursts, pulsars, and other sources of impulsive radio emission. We describe the science scope for realfast, the system design, expected outcomes, and ways in which real-time analysis can help in other fields of astrophysics.

  11. Integrated tokamak modelling with the fast-ion Fokker–Planck solver adapted for transient analyses

    International Nuclear Information System (INIS)

    Toma, M; Hamamatsu, K; Hayashi, N; Honda, M; Ide, S

    2015-01-01

    Integrated tokamak modelling that enables the simulation of an entire discharge period is indispensable for designing advanced tokamak plasmas. For this purpose, we extend the integrated code TOPICS to make it more suitable for transient analyses in the fast-ion part. The fast-ion Fokker–Planck solver is integrated into TOPICS at the same level as the bulk transport solver so that the time evolutions of the fast ion and the bulk plasma are consistent with each other as well as with the equilibrium magnetic field. The fast-ion solver simultaneously handles neutral beam-injected ions and alpha particles. Parallelisation of the fast-ion solver in addition to its computational lightness owing to a dimensional reduction in the phase space enables transient analyses for long periods in the order of tens of seconds. The fast-ion Fokker–Planck calculation is compared and confirmed to be in good agreement with an orbit following a Monte Carlo calculation. The integrated code is applied to ramp-up simulations for JT-60SA and ITER to confirm its capability and effectiveness in transient analyses. In the integrated simulations, the coupled evolution of the fast ions, plasma profiles, and equilibrium magnetic fields are presented. In addition, the electric acceleration effect on fast ions is shown and discussed. (paper)

  12. Fast reactor fuel pin behavior analyses in a LOF type transient event

    International Nuclear Information System (INIS)

    Mizuno, Tomoyasu; Koyama, Shin-ichi; Kaito, Takeji; Uwaba, Tomoyuki; Tanaka, Kenya

    2013-06-01

    In order to evaluate integrity limiting parameters of fuel pins during fast reactor core transient events, such as fuel center line temperature and cladding maximum temperature, fuel pin behavior calculations were made using the fast reactor fuel pin performance code CEDAR. The temperature histories of fuel pins during a loss of flow (LOF) type transient events was calculated based on Ross and Stoute type gap conductance model and constant gap conductance model, which is used in a core transient calculation code like HIPRAC. The calculated maximum temperatures of cladding and adjacent coolant channel were lower in the case with Ross and Stoute type model than in the case of constant gap conductance model due to the dynamic change of gap conductance of former case. It is indicated that core transient calculations with constant gap conductance give conservative cladding and coolant temperatures than that with Ross and Stoute type gap conductance model which is thought to be realistic. (author)

  13. Fast Turn-off Mine Transient Electromagnetic Transmitter System

    Directory of Open Access Journals (Sweden)

    ZHENG Xiao-Liang

    2014-05-01

    Full Text Available For solving problems such as short turn-off time, high linear degree of falling edge, measurement of turn-off time and influence of primary signals for transient electromagnetic transmitter, and restrictions because of the environmental conditions of underground coal mine, this thesis aims at designing a new transient electromagnetic transmitter system suitable for coal mine. Supported by damping absorption circuit, such system applies small volume, sectional transmitting coil, with features of short turn-off time, high linear degree of current falling edge. It uses the transmitter monitoring circuit, which accurately measures turn-off time and simultaneously records the current value changes after turn-off, thus to eliminate the influence of primary field as well as to restore earlier secondary field signals for reference and finally to improve the ability to detect the shallow structure. It turns out that the new system has a shorter turn-off time, a higher linear degree of current falling and more accurate data record of turn-off current.

  14. Transformation Craft (T-Craft) Concept Study

    National Research Council Canada - National Science Library

    Marks, Cynthia; Phelps, Chance; Ryan, Justin; Sorensen, Paul

    2007-01-01

    The objective of the Transformation Craft (T-Craft) innovation team was to develop a conceptual craft that addresses the problem of transporting military vehicles at high speed from the Sea Base to troops inland...

  15. Neutronics methods for transient and safety analysis of fast reactors

    Energy Technology Data Exchange (ETDEWEB)

    Marchetti, Marco

    2017-07-01

    Modeling the evolution of possible or postulated accidents in nuclear reactors is fundamental in designing safe systems. For the next generation of reactors, in particular fast reactors, fuel movement during an accident can, in principle, drive an energetic event. Such is the issue of recriticality. The thermal energy produced during these events will, possibly, be converted into mechanical energy by some mechanisms. For example, the nuclear heat deposited in the fuel could cause fuel vaporization and its subsequent expansion. This movement would accelerate the surrounding sodium: part of the initial energy in the fuel is thus converted into sodium kinetic energy. This mechanical energy will finally be absorbed, in some way or another, by the reactor vessel. Providing an accurate estimate for the maximum mechanical work that any accidental sequence can do onto the reactor vessel is an essential step in designing a reactor containment that would withstand any load generated by any accident. That would assure accident containment, without consequences for the general public. Fast reactor accident modeling is a complicated task. The outcome of an accident is determined by different physical phenomena, all acting at almost the same time. Safety analysts must track all these different phenomena. Multi-physics codes have been developed for this task. They must contain accurate models for fluid-dynamics, neutronics, and structures. This work has to do with neutronics modeling of such accidents. Past and recent analyses have been limited to the approximate description of the neutronic field, for example by using a rough description of the energy and/or of the angular dependence of the neutron flux. In this work, different neutronic solvers are selected and coupled into a general multi-physics code for fast reactor accident analysis. Performances of each of them is then assessed. Some emphasis has been put also in assessing the speed of these solvers for determining the

  16. Development of an advanced code system for fast-reactor transient analysis

    International Nuclear Information System (INIS)

    Konstantin Mikityuk; Sandro Pelloni; Paul Coddington

    2005-01-01

    FAST (Fast-spectrum Advanced Systems for power production and resource management) is a recently approved PSI activity in the area of fast spectrum core and safety analysis with emphasis on generic developments and Generation IV systems. In frames of the FAST project we will study both statics and transients core physics, reactor system behaviour and safety; related international experiments. The main current goal of the project is to develop unique analytical and code capability for core and safety analysis of critical (and sub-critical) fast spectrum systems with an initial emphasis on a gas cooled fast reactors. A structure of the code system is shown on Fig. 1. The main components of the FAST code system are 1) ERANOS code for preparation of basic x-sections and their partial derivatives; 2) PARCS transient nodal-method multi-group neutron diffusion code for simulation of spatial (3D) neutron kinetics in hexagonal and square geometries; 3) TRAC/AAA code for system thermal hydraulics; 4) FRED transient model for fuel thermal-mechanical behaviour; 5) PVM system as an interface between separate parts of the code system. The paper presents a structure of the code system (Fig. 1), organization of interfaces and data exchanges between main parts of the code system, examples of verification and application of separate codes and the system as a whole. (authors)

  17. Fuel damage during off-normal transients in metal-fueled fast reactors

    International Nuclear Information System (INIS)

    Kramer, J.M.; Bauer, T.H.

    1990-01-01

    Fuel damage during off-normal transients is a key issue in the safety of fast reactors because the fuel pin cladding provides the primary barrier to the release of radioactive materials. Part of the Safety Task of the Integral Fast Reactor Program is to provide assessments of the damage and margins to failure for metallic fuels over the wide range of transients that must be considered in safety analyses. This paper reviews the current status of the analytical and experimental programs that are providing the bases for these assessments. 13 refs., 2 figs

  18. Space Craft

    Science.gov (United States)

    Demski, Jennifer

    2009-01-01

    This article discusses how craft innovative architecture is bringing form to the function of 21st-century learning. It describes the construction of New Tech High at Coppell, in Coppell, Texas, which produces an example of how workplace design principles can be coordinated with modern educational goals. The campus was built on the model of New…

  19. A FRAMEWORK FOR INTERPRETING FAST RADIO TRANSIENTS SEARCH EXPERIMENTS: APPLICATION TO THE V-FASTR EXPERIMENT

    International Nuclear Information System (INIS)

    Trott, Cathryn M.; Tingay, Steven J.; Wayth, Randall B.; Macquart, Jean-Pierre R.; Palaniswamy, Divya; Thompson, David R.; Wagstaff, Kiri L.; Majid, Walid A.; Burke-Spolaor, Sarah; Deller, Adam T.; Brisken, Walter F.

    2013-01-01

    We define a framework for determining constraints on the detection rate of fast transient events from a population of underlying sources, with a view to incorporate beam shape, frequency effects, scattering effects, and detection efficiency into the metric. We then demonstrate a method for combining independent data sets into a single event rate constraint diagram, using a probabilistic approach to the limits on parameter space. We apply this new framework to present the latest results from the V-FASTR experiment, a commensal fast transients search using the Very Long Baseline Array (VLBA). In the 20 cm band, V-FASTR now has the ability to probe the regions of parameter space of importance for the observed Lorimer and Keane fast radio transient candidates by combining the information from observations with differing bandwidths, and properly accounting for the source dispersion measure, VLBA antenna beam shape, experiment time sampling, and stochastic nature of events. We then apply the framework to combine the results of the V-FASTR and Allen Telescope Array Fly's Eye experiments, demonstrating their complementarity. Expectations for fast transients experiments for the SKA Phase I dish array are then computed, and the impact of large differential bandwidths is discussed.

  20. Analysis of very fast transients in layer-type transformer windings

    NARCIS (Netherlands)

    Popov, M.; Sluis, van der L.; Smeets, R.; Lopez Roldan, J.

    2007-01-01

    This paper deals with the measurement, modeling, and simulation of very fast transient overvoltages in layer-type distribution transformer windings. Measurements were performed by applying a step impulse with 50-ns rise time on a single-phase test transformer equipped with measuring points along the

  1. LIMITS ON THE EVENT RATES OF FAST RADIO TRANSIENTS FROM THE V-FASTR EXPERIMENT

    International Nuclear Information System (INIS)

    Wayth, Randall B.; Tingay, Steven J.; Deller, Adam T.; Brisken, Walter F.; Thompson, David R.; Wagstaff, Kiri L.; Majid, Walid A.

    2012-01-01

    We present the first results from the V-FASTR experiment, a commensal search for fast transient radio bursts using the Very Long Baseline Array (VLBA). V-FASTR is unique in that the widely spaced VLBA antennas provide a discriminant against non-astronomical signals and a mechanism for the localization and identification of events that is not possible with single dishes or short baseline interferometers. Thus, far V-FASTR has accumulated over 1300 hr of observation time with the VLBA, between 90 cm and 3 mm wavelength (327 MHz-86 GHz), providing the first limits on fast transient event rates at high radio frequencies (>1.4 GHz). V-FASTR has blindly detected bright individual pulses from seven known pulsars but has not detected any single-pulse events that would indicate high-redshift impulsive bursts of radio emission. At 1.4 GHz, V-FASTR puts limits on fast transient event rates comparable with the PALFA survey at the Arecibo telescope, but generally at lower sensitivities, and comparable to the 'fly's eye' survey at the Allen Telescope Array, but with less sky coverage. We also illustrate the likely performance of the Phase 1 SKA dish array for an incoherent fast transient search fashioned on V-FASTR.

  2. Ultra-fast transient plasmonics using transparent conductive oxides

    Science.gov (United States)

    Ferrera, Marcello; Carnemolla, Enrico G.

    2018-02-01

    During the last decade, plasmonic- and metamaterial-based applications have revolutionized the field of integrated photonics by allowing for deep subwavelength confinement and full control over the effective permittivity and permeability of the optical environment. However, despite the numerous remarkable proofs of principle that have been experimentally demonstrated, few key issues remain preventing a widespread of nanophotonic technologies. Among these fundamental limitations, we remind the large ohmic losses, incompatibility with semiconductor industry standards, and largely reduced dynamic tunability of the optical properties. In this article, in the larger context of the new emerging field of all-dielectric nanophotonics, we present our recent progresses towards the study of large optical nonlinearities in transparent conducting oxides (TCOs) also giving a general overview of the most relevant and recent experimental attainments using TCO-based technology. However, it is important to underline that the present article does not represent a review paper but rather an original work with a broad introduction. Our work lays in a sort of ‘hybrid’ zone in the middle between high index contrast systems, whose behaviour is well described by applying Mie scattering theory, and standard plasmonic elements where optical modes originate from the electromagnetic coupling with the electronic plasma at the metal-to-dielectric interface. Beside remaining in the context of plasmonic technologies and retaining all the fundamental peculiarities that promoted the success of plasmonics in the first place, our strategy has the additional advantage to allow for large and ultra-fast tunability of the effective complex refractive index by accessing the index-near-zero regime in bulk materials at telecom wavelength.

  3. Contextualising Craft: Pedagogical Models for Craft Education

    Science.gov (United States)

    Pollanen, Sinikka

    2009-01-01

    Craft education in Finland is, in many aspects, in a state of change. This concerns the independent position of craft as a school subject, the content of the compulsory craft courses containing textiles and technical work, the implementation of the new concept of a holistic craft process in the National Core Curriculum and so on. This bears…

  4. Susceptibility and hardening of electronic systems to fast transient threats: new challenges ahead

    Directory of Open Access Journals (Sweden)

    F. Sabath

    2004-01-01

    Full Text Available The field of susceptibility and hardening of electronic systems to transient threats has experienced a significant growth during the past ten years. Driven by the development in the area of non-lethal electromagnetic weapons it has become necessary to extend the classical set of transient threats, consisting of LEMP, ESD and NEMP, by a fast transient threat with an extreme bandwidth. The investigation of the susceptibility to those UWB threats, characterized by a bandwidth of more than a quarter of the center frequency, rise times of less than 200 ps and pulse durations in the ns regime, is of special interest. This paper presents an overview of current challenges of the hardening against UWB threats. It discusses recent research trends in transient susceptibility measurements, protection concepts and methods of analysis.

  5. Brane Craft

    Science.gov (United States)

    Janson, Siegfried

    2017-01-01

    A Brane Craft is a membrane spacecraft with solar cells, command and control electronics, communications systems, antennas, propulsion systems, attitude and proximity sensors, and shape control actuators as thin film structures manufactured on 10 micron thick plastic sheets. This revolutionary spacecraft design can have a thickness of tens of microns with a surface area of square meters to maximize area-to-mass ratios for exceptionally low-mass spacecraft. Communications satellites, solar power satellites, solar electric propulsion stages, and solar sails can benefit from Brane Craft design. It also enables new missions that require low-mass spacecraft with exceptionally high delta-V. Active removal of orbital debris from Earth orbit is the target application for this study.

  6. Fast reactor safety testing in Transient Reactor Test (TREAT) in the 1980s

    International Nuclear Information System (INIS)

    Wright, A.E.; Dutt, D.S.; Harrison, L.J.

    1990-01-01

    Several series of fast reactor safety tests were performed in TREAT during the 1980s. These focused on the transient behavior of full-length oxide fuels (US reference, UK reference, and US advanced design) and on modern metallic fuels. Most of the tests addressed fuel behavior under transient overpower or loss-of-flow conditions. The test series were the PFR/TREAT tests; the RFT, TS, CDT, and RX series on oxide fuels; and the M series on metallic fuels. These are described in terms of their principal results and relevance to analyses and safety evaluation. 4 refs., 3 tabs

  7. Macroscopic behavior of fast reactor fuel subjected to simulated thermal transients

    International Nuclear Information System (INIS)

    Fenske, G.R.; Emerson, J.E.; Savoie, F.E.

    1983-06-01

    High-speed cinematography has been used to characterize the macroscopic behavior of irradiated and unirradiated fuel subjected to thermal transients prototypical of fast reactor transients. The results demonstrate that as the cladding melts, the fuel can disperse via spallation if the fuel contains in excess of approx. 16 μmoles/gm of fission gas. Once the cladding has melted, the macroscopic behavior (time to failure and dispersive nature) was strongly influenced by the presence of volatile fission products and the heating rate

  8. FAST: a combined NOC and transient fuel performance model using a commercial FEM environment

    Energy Technology Data Exchange (ETDEWEB)

    Prudil, A.; Bell, J.; Oussoren, A.; Chan, P. [Royal Military College of Canada, Kingston, ON (Canada); Lewis, B. [Univ. of Ontario Inst. of Tech., Oshawa, ON (Canada)

    2014-07-01

    The Fuel And Sheath modelling Tool (FAST) is a combined normal operating conditions (NOC) and transient fuel performance code developed on the COMSOL Multiphysics finite-element platform. The FAST code has demonstrated excellent performance in proof of concept validation tests against experimental data and comparison to the ELESIM, ELESTRES and ELOCA fuel performance codes. In this paper we discuss ongoing efforts to expand the capabilities of the code to include multiple pellet geometries, model stress-corrosion cracking phenomena and modelling of advanced fuels composed of mixed oxides of thorium, uranium, and plutonium for the Canadian Supercritical Water Reactor (SCWR). (author)

  9. Transient Safety Analysis of Fast Spectrum TRU Burning LWRs with Internal Blankets

    Energy Technology Data Exchange (ETDEWEB)

    Downar, Thomas [Univ. of Michigan, Ann Arbor, MI (United States); Zazimi, Mujid [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Hill, Bob [Argonne National Lab. (ANL), Argonne, IL (United States)

    2015-01-31

    The objective of this proposal was to perform a detailed transient safety analysis of the Resource-Renewable BWR (RBWR) core designs using the U.S. NRC TRACE/PARCS code system. This project involved the same joint team that has performed the RBWR design evaluation for EPRI and therefore be able to leverage that previous work. And because of their extensive experience with fast spectrum reactors and parfait core designs, ANL was also part the project team. The principal outcome of this project was the development of a state-of-the-art transient analysis capability for GEN-IV reactors based on Monte Carlo generated cross sections and the US NRC coupled code system TRACE/PARCS, and a state-of-the-art coupled code assessment of the transient safety performance of the RBWR.

  10. Anticipated transients without scram for light water reactors: implications for liquid metal fast breeder reactors

    International Nuclear Information System (INIS)

    Kastenberg, W.E.; Solomon, K.A.

    1979-07-01

    In the design of light water reactors (LWRs), protection against anticipated transients (e.g., loss of normal electric power and control rod withdrawal) is provided by a highly reliable scram, or shutdown system. If this system should become inoperable, however, the transient could lead to a core meltdown. The Nuclar Regulatory Commission (NRC) has proposed, in NUREG-0460 [1], new requirements (or acceptance criteria) for anticipated transients without scram (ATWS) events and the manner in which they could be considered in the design and safety evaluation of LWRs. This note assesses the potential impact of the proposed LWR-ATWS criteria on the liquid metal fast breeder reactor (LMFBR) safety program as represented by the Clinch River Breeder Reactor Plant

  11. Supergiant Fast X-ray Transients with Swift: spectroscopic and temporal properties

    OpenAIRE

    Romano, P.; Mangano, V.; Ducci, L.; Esposito, P.; Farinelli, R.; Ceccobello, C.; Vercellone, S.; Burrows, D. N.; Kennea, J. A.; Krimm, H. A.; Gehrels, N.

    2012-01-01

    Supergiant fast X-ray transients (SFXTs) are a class of high-mass X-ray binaries with possible counterparts in the high energy gamma rays. The Swift SFXT Project has conducted a systematic investigation of the properties of SFTXs on timescales ranging from minutes to years and in several intensity states (from bright flares, to intermediate intensity states, and down to almost quiescence). We also performed broad-band spectroscopy of outbursts, and intensity-selected spectroscopy outside of o...

  12. Development of the computer code for transient analysis in experimental fast reactor

    International Nuclear Information System (INIS)

    Moreira, M.L.; Sato, E.F.

    1989-01-01

    A calculational model of heat transfer and fluid coolant dynamics, for thermal-hydraulic simulation of the primary system components of a pool type experimental fast breeder reactor, has developed. Programmed in FORTRAN, the SORES code was used to simulate transients as loss of pumping and loss of secondary sodium flow in the EBRII. The SORES results compared with measured data and NATDEMO code results was found to be good. (author) [pt

  13. Modular time division multiplexer: Efficient simultaneous characterization of fast and slow transients in multiple samples

    Science.gov (United States)

    Kim, Stephan D.; Luo, Jiajun; Buchholz, D. Bruce; Chang, R. P. H.; Grayson, M.

    2016-09-01

    A modular time division multiplexer (MTDM) device is introduced to enable parallel measurement of multiple samples with both fast and slow decay transients spanning from millisecond to month-long time scales. This is achieved by dedicating a single high-speed measurement instrument for rapid data collection at the start of a transient, and by multiplexing a second low-speed measurement instrument for slow data collection of several samples in parallel for the later transients. The MTDM is a high-level design concept that can in principle measure an arbitrary number of samples, and the low cost implementation here allows up to 16 samples to be measured in parallel over several months, reducing the total ensemble measurement duration and equipment usage by as much as an order of magnitude without sacrificing fidelity. The MTDM was successfully demonstrated by simultaneously measuring the photoconductivity of three amorphous indium-gallium-zinc-oxide thin films with 20 ms data resolution for fast transients and an uninterrupted parallel run time of over 20 days. The MTDM has potential applications in many areas of research that manifest response times spanning many orders of magnitude, such as photovoltaics, rechargeable batteries, amorphous semiconductors such as silicon and amorphous indium-gallium-zinc-oxide.

  14. Research of three-dimensional transient reactivity feedback in fast reactor

    International Nuclear Information System (INIS)

    Xu Li; Shi Gong; Ma Dayuan; Yu Hong

    2013-01-01

    To solve the three-dimensional time-spatial kinetics feedback problems in fast reactor, a mathematical model of the direct reactivity feedback was proposed. Based on the NAS code for fast reactor and the reactivity feedback mechanism, a feedback model which combined the direct reactivity feedback and feedback reflected by the cross section variation was provided for the transient calculation. Furthermore, the fast reactor group collapsing system was added to the code, thus the real time group collapsing calculation could be realized. The isothermal elevated temperature test of CEFR was simulated by using the code. By comparing the calculation result with the test result of the temperature reactivity coefficient, the validity of the model and the code is verified. (authors)

  15. The DSNP simulation language and its application to liquid-metal fast breeder reactor transient analyses

    International Nuclear Information System (INIS)

    Saphier, D.; Madell, J.T.

    1982-01-01

    A new, special purpose block-oriented simulation language, the Dynamic Simulator for Nuclear Power Plants (DSNP), was used to perform a dynamic analysis of several conceptual design studies of liquid metal fast breeder reactors. The DSNP being a high level language enables the user to transform a power plant flow chart directly into a simulation program using a small number of DSNP statements. In addition to the language statements, the DSNP system has its own precompiler and an extensive library containing models of power plant components, algorithms of physical processes, material property functions, and various auxiliary functions. The comparative analysis covered oxide-fueled versus metal-fueled core designs and loop- versus pool-type reactors. The question of interest was the rate of change of the temperatures in the components in the upper plenum and the primary loop, in particular the reactor outlet nozzle and the intermediate heat exchanger inlet nozzle during different types of transients. From the simulations performed it can be concluded that metal-fueled cores will have much faster temperature transients than oxide-fueled cores due mainly to the much higher thermal diffusivity of the metal fuel. The transients in the pool-type design (either with oxide fuel or metal fuel) will be much slower than in the loop-type design due to the large heat capacity of the sodium pool. The DSNP language was demonstrated to be well suited to perform many types of transient analysis in nuclear power plants

  16. Study of Fast Transient Pressure Drop in VVER-1000 Nuclear Reactor Using Acoustic Phenomenon

    Directory of Open Access Journals (Sweden)

    Soroush Heidari Sangestani

    2018-01-01

    Full Text Available This article aims to simulate the sudden and fast pressure drop of VVER-1000 reactor core coolant, regarding acoustic phenomenon. It is used to acquire a more accurate method in order to simulate the various accidents of reactor core. Neutronic equations should be solved concurrently by means of DRAGON 4 and DONJON 4 coupling codes. The results of the developed package are compared with WIMS/CITATION and final safety analysis report of Bushehr VVER-1000 reactor (FSAR. Afterwards, time dependent thermal-hydraulic equations are answered by employing Single Heated Channel by Sectionalized Compressible Fluid method. Then, the obtained results were validated by the same transient simulation in a pressurized water reactor core. Then, thermal-hydraulic and neutronic modules are coupled concurrently by use of producing group constants regarding the thermal feedback effect. Results were compared to the mentioned transient simulation in RELAP5 computer code, which show that mass flux drop is sensed at the end of channel in several milliseconds which causes heat flux drop too. The thermal feedback resulted in production of some perturbations in the changes of these parameters. The achieved results for this very fast pressure drop represent accurate calculations of thermoneutronic parameters fast changes.

  17. Transient analyses for a molten salt fast reactor with optimized core geometry

    Energy Technology Data Exchange (ETDEWEB)

    Li, R., E-mail: rui.li@kit.edu [Institute for Nuclear and Energy Technologies (IKET), Karlsruhe Institute of Technology (KIT), Hermann-von-Helmholtz-Platz 1, D-76344 Eggenstein-Leopoldshafen (Germany); Wang, S.; Rineiski, A.; Zhang, D. [Institute for Nuclear and Energy Technologies (IKET), Karlsruhe Institute of Technology (KIT), Hermann-von-Helmholtz-Platz 1, D-76344 Eggenstein-Leopoldshafen (Germany); Merle-Lucotte, E. [Laboratoire de Physique Subatomique et de Cosmologie – IN2P3 – CNRS/Grenoble INP/UJF, 53, rue des Martyrs, 38026 Grenoble (France)

    2015-10-15

    Highlights: • MSFR core is analyzed by fully coupling neutronics and thermal-hydraulics codes. • We investigated four types of transients intensively with the optimized core geometry. • It demonstrates MSFR has a high safety potential. - Abstract: Molten salt reactors (MSRs) have encountered a marked resurgence of interest over the past decades, highlighted by their inclusion as one of the six candidate reactors of the Generation IV advanced nuclear power systems. The present work is carried out in the framework of the European FP-7 project EVOL (Evaluation and Viability Of Liquid fuel fast reactor system). One of the project tasks is to report on safety analyses: calculations of reactor transients using various numerical codes for the molten salt fast reactor (MSFR) under different boundary conditions, assumptions, and for different selected scenarios. Based on the original reference core geometry, an optimized geometry was proposed by Rouch et al. (2014. Ann. Nucl. Energy 64, 449) on thermal-hydraulic design aspects to avoid a recirculation zone near the blanket which accumulates heat and very high temperature exceeding the salt boiling point. Using both fully neutronics thermal-hydraulic coupled codes (SIMMER and COUPLE), we also re-confirm the efforts step by step toward a core geometry without the recirculation zone in particular as concerns the modifications of the core geometrical shape. Different transients namely Unprotected Loss of Heat Sink (ULOHS), Unprotected Loss of Flow (ULOF), Unprotected Transient Over Power (UTOP), Fuel Salt Over Cooling (FSOC) are intensively investigated and discussed with the optimized core geometry. It is demonstrated that due to inherent negative feedbacks, an MSFR plant has a high safety potential.

  18. Numerical methods and parallel algorithms for fast transient strongly coupled fluid-structure dynamics

    International Nuclear Information System (INIS)

    Faucher, V.

    2014-01-01

    This HDR is dedicated to the research in the framework of fast transient dynamics for industrial fluid-structure systems carried in the Laboratory of Dynamic Studies from CEA, implementing new numerical methods for the modelling of complex systems and the parallel solution of large coupled problems on supercomputers. One key issue for the proposed approaches is the limitation to its minimum of the number of non-physical parameters, to cope with constraints arising from the area of usage of the concepts: safety for both nuclear applications (CEA, EDF) and aeronautics (ONERA), protection of the citizen (EC/JRC) in particular. Kinematic constraints strongly coupling structures (namely through unilateral contact) or fluid and structures (with both conformant or non-conformant meshes depending on the geometrical situation) are handled through exact methods including Lagrange Multipliers, with consequences on the solution strategy to be dealt with. This latter aspect makes EPX, the simulation code where the methods are integrated, a singular tool in the community of fast transient dynamics software. The document mainly relies on a description of the modelling needs for industrial fast transient scenarios, for nuclear applications in particular, and the proposed solutions built in the framework of the collaboration between CEA, EDF (via the LaMSID laboratory) and the LaMCoS laboratory from INSA Lyon. The main considered examples are the tearing of the fluid-filled tank after impact, the Code Disruptive Accident for a Generation IV reactor or the ruin of reinforced concrete structures under impact. Innovative models and parallel algorithms are thus proposed, allowing to carry out with robustness and performance the corresponding simulations on supercomputers made of interconnected multi-core nodes, with a strict preservation of the quality of the physical solution. This was particularly the main point of the ANR RePDyn project (2010-2013), with CEA as the pilot. (author

  19. The orbital period in the supergiant fast X-ray transient IGR J16465--4507

    OpenAIRE

    Clark, D. J.; Sguera, V.; Bird, A. J; McBride, V. A.; Hill, A. B.; Scaringi, S.; Drave, S.; Bazzano, A.; Dean, A. J

    2010-01-01

    Timing analysis of the INTEGRAL-IBIS and Swift-BAT light curves of the Supergiant Fast X-ray Transient (SFXT) IGR J16465-4507 has identified a period of 30.32+/-0.02 days which we interpret as the orbital period of the binary system. In addition 11 outbursts (9 of which are previously unpublished) have been found between MJD 52652 to MJD 54764, all of which occur close to the region of the orbit we regard as periastron. From the reported flux outbursts, we found a dynamical range in the inter...

  20. Modeling the behavior of metallic fast reactor fuels during extended transients

    International Nuclear Information System (INIS)

    Kramer, J.M.; Liu, Y.Y.; Billone, M.C.; Tsai, H.C.

    1993-01-01

    Passive safety features in metal-fueled reactors utilizing the Integral Fast Reactor (IFR) fuel system make it possible to avoid core damage for extended time periods even when automatic scram system fail to operate or heat removal systems are severely degraded. The time scale for these transients are intermediate between those that have traditionally been analyzed in fast reactor safety assessments and those of normal operation. Consequently, it has been necessary to validate models and computer codes (FPIN2 and LIFE-METAL) for application to this intermediate time regime. Results from out-of-reactor Whole Pin Furnace tests are being used for this purpose. Pretest predictions for tests FM-1 through FM-6 have been performed and calculations have been compared with the experimental measurements. (orig.)

  1. Modeling the behavior of metallic fast reactor fuels during extended transients

    International Nuclear Information System (INIS)

    Kramer, J.M.; Liu, Y.Y.; Billone, M.C.; Tsai, H.C.

    1992-01-01

    Passive safety features in the metal-fueled Integral Fast Reactor (IFR) make it possible to avoid core damage for extended time periods even when automatic scram systems fail to operate or heat removal systems are severely degraded. The time scale for these transients are intermediate between those that have traditionally been analyzed in fast reactor safety assessments and those of normal operation. Consequently, it has been necessary to validate models and computer codes (FPIN2 and LIFE-METAL) for application to this time regime. Results from out-of-reactor Whole Pin Furnace tests are being used for this purpose. Pretest predictions for tests FM-1 through FM-6 have been performed and calculations have been compared with the experimental measurements

  2. Influence of resonant magnetic perturbations on transient heat load deposition and fast ion losses

    International Nuclear Information System (INIS)

    Rack, Michael Thomas

    2014-01-01

    Thermonuclear fusion is the energy conversion process which keeps the sun shining. For the last six decades, researchers have been investigating the physics involved in order to enable the usage of this energy supply on Earth. The most promising candidates for fusion power plants are based on magnetic confinement of plasma to provide the ideal conditions for efficient thermonuclear fusion in well controlled surroundings. One important aspect is the control of instabilities that occur in the edge region of the plasma and lead to an ejection of huge amounts of energy. Magnetic perturbation fields which are resonant in the plasma edge are found to modify the plasma favourably and reduce the impact of these instabilities. This dissertation focuses on the effects of resonant magnetic perturbation fields on the ejected energy as well as on the drawbacks of these perturbation fields. The transient energy ejection which is triggered by the instabilities causes extreme heat loads on the wall components in fusion devices. Therefore, it is crucial to understand how resonant magnetic perturbation fields affect the heat load deposition. Furthermore, the impact of resonant magnetic perturbation fields on the confinement of fast ions is an important aspect as fast ions are still required to be well confined in order to avoid additional wall loads and increase the fusion efficiency. Recent upgrades on the Joint European Torus allow for a detailed study of the heat load deposition profiles caused by transient events. Throughout this work, the new features are used for the study of the modifications of the transient heat load depositions that occur if resonant magnetic perturbation fields are applied. This leads to a further understanding of the processes involved during the plasma edge instabilities. Additionally, an alternative method using lower hybrid waves for applying resonant magnetic perturbations is investigated. Furthermore, a new diagnostic, capable of detecting fast ion

  3. Influence of resonant magnetic perturbations on transient heat load deposition and fast ion losses

    Energy Technology Data Exchange (ETDEWEB)

    Rack, Michael Thomas

    2014-07-11

    Thermonuclear fusion is the energy conversion process which keeps the sun shining. For the last six decades, researchers have been investigating the physics involved in order to enable the usage of this energy supply on Earth. The most promising candidates for fusion power plants are based on magnetic confinement of plasma to provide the ideal conditions for efficient thermonuclear fusion in well controlled surroundings. One important aspect is the control of instabilities that occur in the edge region of the plasma and lead to an ejection of huge amounts of energy. Magnetic perturbation fields which are resonant in the plasma edge are found to modify the plasma favourably and reduce the impact of these instabilities. This dissertation focuses on the effects of resonant magnetic perturbation fields on the ejected energy as well as on the drawbacks of these perturbation fields. The transient energy ejection which is triggered by the instabilities causes extreme heat loads on the wall components in fusion devices. Therefore, it is crucial to understand how resonant magnetic perturbation fields affect the heat load deposition. Furthermore, the impact of resonant magnetic perturbation fields on the confinement of fast ions is an important aspect as fast ions are still required to be well confined in order to avoid additional wall loads and increase the fusion efficiency. Recent upgrades on the Joint European Torus allow for a detailed study of the heat load deposition profiles caused by transient events. Throughout this work, the new features are used for the study of the modifications of the transient heat load depositions that occur if resonant magnetic perturbation fields are applied. This leads to a further understanding of the processes involved during the plasma edge instabilities. Additionally, an alternative method using lower hybrid waves for applying resonant magnetic perturbations is investigated. Furthermore, a new diagnostic, capable of detecting fast ion

  4. Adaptive polynomial chaos techniques for uncertainty quantification of a gas cooled fast reactor transient

    International Nuclear Information System (INIS)

    Perko, Z.; Gilli, L.; Lathouwers, D.; Kloosterman, J. L.

    2013-01-01

    Uncertainty quantification plays an increasingly important role in the nuclear community, especially with the rise of Best Estimate Plus Uncertainty methodologies. Sensitivity analysis, surrogate models, Monte Carlo sampling and several other techniques can be used to propagate input uncertainties. In recent years however polynomial chaos expansion has become a popular alternative providing high accuracy at affordable computational cost. This paper presents such polynomial chaos (PC) methods using adaptive sparse grids and adaptive basis set construction, together with an application to a Gas Cooled Fast Reactor transient. Comparison is made between a new sparse grid algorithm and the traditionally used technique proposed by Gerstner. An adaptive basis construction method is also introduced and is proved to be advantageous both from an accuracy and a computational point of view. As a demonstration the uncertainty quantification of a 50% loss of flow transient in the GFR2400 Gas Cooled Fast Reactor design was performed using the CATHARE code system. The results are compared to direct Monte Carlo sampling and show the superior convergence and high accuracy of the polynomial chaos expansion. Since PC techniques are easy to implement, they can offer an attractive alternative to traditional techniques for the uncertainty quantification of large scale problems. (authors)

  5. Review of Transient Fuel Test Results at Sandia National Laboratories and the Potential for Future Fast Reactor Fuel Transient Testing in the Annular Core Research Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Wright, Steven A.; Pickard, Paul S.; Parma, Edward J.; Vernon, Milton E.; Kelly, John; Tikare, Veena [Sandia National Laboratories, Org 6872 MS-1146, PO Box 5800 Albuquerque, New Mexico 87185 (United States)

    2009-06-15

    Reactor driven transient tests of fast reactor fuels may be required to support the development and certification of new fuels for Fast Reactors. The results of the transient fuel tests will likely be needed to support licensing and to provide validation data to support the safety case for a variety of proposed fast fuel types and reactors. In general reactor driven transient tests are used to identify basic phenomenology during reactor transients and to determine the fuel performance limits and margins to failure during design basis accidents such as loss of flow, loss of heat sink, and reactivity insertion accidents. This paper provides a summary description of the previous Sandia Fuel Disruption and Transient Axial Relocation tests that were performed in the Annular Core Research Reactor (ACRR) for the U.S. Nuclear Regulatory Commission almost 25 years ago. These tests consisted of a number of capsule tests and flowing gas tests that used fission heating to disrupt fresh and irradiated MOX fuel. The behavior of the fuel disruption, the generation of aerosols and the melting and relocation of fuel and cladding was recorded on high speed cinematography. This paper will present videos of the fuel disruption that was observed in these tests which reveal stark differences in fuel behavior between fresh and irradiated fuel. Even though these tests were performed over 25 years ago, their results are still relevant to today's reactor designs. These types of transient tests are again being considered by the Advanced Fuel Cycle Initiative to support the Global Nuclear Energy Partnership because of the need to perform tests on metal fuels and transuranic fuels. Because the Annular Core Research Reactor is the only transient test facility available within the US, a brief summary of Sandia's continued capability to perform these tests in the ACRR will also be provided. (authors)

  6. LARGE SUPER-FAST ROTATOR HUNTING USING THE INTERMEDIATE PALOMAR TRANSIENT FACTORY

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Chan-Kao; Lin, Hsing-Wen; Ip, Wing-Huen [Institute of Astronomy, National Central University, Jhongli, Taiwan (China); Prince, Thomas A.; Kulkarni, Shrinivas R.; Levitan, David [Division of Physics, Mathematics and Astronomy, California Institute of Technology, Pasadena, CA 91125 (United States); Laher, Russ; Surace, Jason, E-mail: rex@astro.ncu.edu.tw [Spitzer Science Center, California Institute of Technology, M/S 314-6, Pasadena, CA 91125 (United States)

    2016-12-01

    In order to look for large super-fast rotators, in late 2014 and early 2015, five dedicated surveys covering ∼188 deg{sup 2} in the ecliptic plane have been carried out in the R -band, with ∼10 minute cadence using the intermediate Palomar Transient Factory. Among 1029 reliable rotation periods obtained from the surveys, we discovered 1 new large super-fast rotator, (40511) 1999 RE88, and 18 other candidates. (40511) 1999 RE88 is an S-type inner main-belt asteroid with a diameter of D  = 1.9 ± 0.3 km, a rotation period of P  = 1.96 ± 0.01 hr, and a light curve amplitude of Δ m  ∼ 1.0 mag. To maintain such fast rotation, an internal cohesive strength of ∼780 Pa is required. Combining all known large super-fast rotators, their cohesive strengths all fall in the range of 100–1000 Pa of lunar regolith. However, the number of large super-fast rotators seems to be far less than the whole asteroid population. This might indicate a peculiar asteroid group for them. Although the detection efficiency for a long rotation period is greatly reduced due to our two-day observation time span, the spin-rate distributions of this work show consistent results with Chang et al. (2015), after considering the possible observational bias in our surveys. It shows a number decrease with an increase of spin rate for asteroids with a diameter of 3 ⩽  D  ⩽ 15 km, and a number drop at a spin rate of f  = 5 rev day{sup −1} for asteroids with D  ⩽ 3 km.

  7. Computer Crafts for Kids.

    Science.gov (United States)

    Kuntz, Margy; Kuntz, Ann

    This work presents a collection of craft projects that can be created by children. Necessary for completion of each craft is an IBM-compatible computer running Windows, "Word for Windows 6.0," with a mouse, a printer, and plain white printer paper. Simple craft supplies, including glue and scissors, also are needed. In each activity the child is…

  8. A Decentralized Current-Sharing Controller Endows Fast Transient Response to Parallel DC-DC Converters

    DEFF Research Database (Denmark)

    Wang, Haojie; Han, Minxiao; Han, Renke

    2018-01-01

    This paper proposes a decentralized current-sharing control strategy to endow fast transient response to paralleled DC-DC converters systems, such as DC microgrids or distributed power systems. The proposed controller consist of two main control loops: an external voltage droop control for current......-sharing proposes and an internal current loop. The external droop control loop is designed as a voltage loop with embedded virtual impedance, which avoids the use of a slow voltage loop and a separate extra virtual impedance loop that may limit the system bandwidth. The internal current loop, thanks...... and the proposed embedded-virtual-impedance based I-V droop. In order to compare the dynamic response performances between two droop controllers, their state-space models have been developed and analyzed in this paper. The results show that the dynamic response of the I-V droop control is faster than...

  9. Fast Transient And Spatially Non-Homogenous Accident Analysis Of Two-Dimensional Cylindrical Nuclear Reactor

    International Nuclear Information System (INIS)

    Yulianti, Yanti; Su'ud, Zaki; Waris, Abdul; Khotimah, S. N.; Shafii, M. Ali

    2010-01-01

    The research about fast transient and spatially non-homogenous nuclear reactor accident analysis of two-dimensional nuclear reactor has been done. This research is about prediction of reactor behavior is during accident. In the present study, space-time diffusion equation is solved by using direct methods which consider spatial factor in detail during nuclear reactor accident simulation. Set of equations that obtained from full implicit finite-difference discretization method is solved by using iterative methods ADI (Alternating Direct Implicit). The indication of accident is decreasing macroscopic absorption cross-section that results large external reactivity. The power reactor has a peak value before reactor has new balance condition. Changing of temperature reactor produce a negative Doppler feedback reactivity. The reactivity will reduce excess positive reactivity. Temperature reactor during accident is still in below fuel melting point which is in secure condition.

  10. Estimation of the radial force on the tokamak vessel wall during fast transient events

    Energy Technology Data Exchange (ETDEWEB)

    Pustovitov, V. D., E-mail: pustovitov-vd@nrcki.ru [National Research Center Kurchatov Institute (Russian Federation)

    2016-11-15

    The radial force balance in a tokamak during fast transient events with a duration much shorter than the resistive time of the vacuum vessel wall is analyzed. The aim of the work is to analytically estimate the resulting integral radial force on the wall. In contrast to the preceding study [Plasma Phys. Rep. 41, 952 (2015)], where a similar problem was considered for thermal quench, simultaneous changes in the profiles and values of the pressure and plasma current are allowed here. Thereby, the current quench and various methods of disruption mitigation used in the existing tokamaks and considered for future applications are also covered. General formulas for the force at an arbitrary sequence or combination of events are derived, and estimates for the standard tokamak model are made. The earlier results and conclusions are confirmed, and it is shown that, in the disruption mitigation scenarios accepted for ITER, the radial forces can be as high as in uncontrolled disruptions.

  11. Seven years with the Swift Supergiant Fast X-ray Transients project

    Science.gov (United States)

    Romano, P.

    2015-09-01

    Supergiant Fast X-ray Transients (SFXTs) are HMXBs with OB supergiant companions. I review the results of the Swift SFXT project, which since 2007 has been exploiting Swift's capabilities in a systematic study of SFXTs and supergiant X-ray binaries (SGXBs) by combining follow-ups of outbursts, when detailed broad-band spectroscopy is possible, with long-term monitoring campaigns, when the out-of-outburst fainter states can be observed. This strategy has led us to measure their duty cycles as a function of luminosity, to extract their differential luminosity distributions in the soft X-ray domain, and to compare, with unprecedented detail, the X-ray variability in these different classes of sources. I also discuss the ;seventh year crisis;, the challenges that the recent Swift observations are making to the prevailing models attempting to explain the SFXT behavior.

  12. Hybrid parallel strategy for the simulation of fast transient accidental situations at reactor scale

    International Nuclear Information System (INIS)

    Faucher, V.; Galon, P.; Beccantini, A.; Crouzet, F.; Debaud, F.; Gautier, T.

    2013-01-01

    This contribution is dedicated to the latest methodological developments implemented in the fast transient dynamics software EUROPLEXUS (EPX) to simulate the mechanical response of fully coupled fluid-structure systems to accidental situations to be considered at reactor scale, among which the Loss of Coolant Accident, the Core Disruptive Accident and the Hydrogen Explosion. Time integration is explicit and the search for reference solutions within the safety framework prevents any simplification and approximations in the coupled algorithm: for instance, all kinematic constraints are dealt with using Lagrange Multipliers, yielding a complex flow chart when non-permanent constraints such as unilateral contact or immersed fluid-structure boundaries are considered. The parallel acceleration of the solution process is then achieved through a hybrid approach, based on a weighted domain decomposition for distributed memory computing and the use of the KAAPI library for self-balanced shared memory processing inside sub-domains. (authors)

  13. Digitally Controlled Point of Load Converter with Very Fast Transient Response

    DEFF Research Database (Denmark)

    Jakobsen, Lars Tønnes; Andersen, Michael Andreas E.

    2007-01-01

    voltage mode control and very fast transient response. The DiSOM modulator is combined with a digital PID compensator algorithm is implemented in a hybrid CPLD/FPGA and is used to control a synchronous Buck converter, which is used in typical Point of Load applications. The computational time is only......This paper presents a new Digital Self-Oscillating Modulator (DiSOM) that allows the duty cycle to be changed instantly. The DiSOM modulator is shown to have variable switching that is a function of the duty cycle. Compared to a more traditional digital PWM modulator based on a counter...... and comparator the DiSOM modulator allows the sampling frequency of the output voltage control loop to be higher than the switching frequency of the power converter, typically a DC/DC converter. The features of the DiSOM modulator makes it possible to design a digitally controlled DC/DC converter with linear...

  14. 3-D thermal hydraulic analysis of transient heat removal from fast reactor core using immersion coolers

    International Nuclear Information System (INIS)

    Chvetsov, I.; Volkov, A.

    2000-01-01

    For advanced fast reactors (EFR, BN-600M, BN-1600, CEFR) the special complementary loop is envisaged in order to ensure the decay heat removal from the core in the case of LOF accidents. This complementary loop includes immersion coolers that are located in the hot reactor plenum. To analyze the transient process in the reactor when immersion coolers come into operation one needs to involve 3-D thermal hydraulics code. Furthermore sometimes the problem becomes more complicated due to necessity of simulation of the thermal hydraulics processes into the core interwrapper space. For example on BN-600M and CEFR reactors it is supposed to ensure the effective removal of decay heat from core subassemblies by specially arranged internal circulation circuit: 'inter-wrapper space'. For thermal hydraulics analysis of the transients in the core and in the whole reactor including hot plenum with immersion coolers and considering heat and mass exchange between the main sodium flow and sodium that moves in the inter-wrapper space the code GRIFIC (the version of GRIF code family) was developed in IPPE. GRIFIC code was tested on experimental data obtained on RAMONA rig under conditions simulating decay heat removal of a reactor with the use of immersion coolers. Comparison has been made of calculated and experimental result, such as integral characteristics (flow rate through the core and water temperature at the core inlet and outlet) and the local temperatures (at thermocouple location) as well. In order to show the capabilities of the code some results of the transient analysis of heat removal from the core of BN-600M - type reactor under loss-of-flow accident are presented. (author)

  15. Hybrid parallel strategy for the simulation of fast transient accidental situations at reactor scale

    International Nuclear Information System (INIS)

    Faucher, V.; Galon, P.; Beccantini, A.; Crouzet, F.; Debaud, F.; Gautier, T.

    2015-01-01

    Highlights: • Reference accidental situations for current and future reactors are considered. • They require the modeling of complex fluid–structure systems at full reactor scale. • EPX software computes the non-linear transient solution with explicit time stepping. • Focus on the parallel hybrid solver specific to the proposed coupled equations. - Abstract: This contribution is dedicated to the latest methodological developments implemented in the fast transient dynamics software EUROPLEXUS (EPX) to simulate the mechanical response of fully coupled fluid–structure systems to accidental situations to be considered at reactor scale, among which the Loss of Coolant Accident, the Core Disruptive Accident and the Hydrogen Explosion. Time integration is explicit and the search for reference solutions within the safety framework prevents any simplification and approximations in the coupled algorithm: for instance, all kinematic constraints are dealt with using Lagrange Multipliers, yielding a complex flow chart when non-permanent constraints such as unilateral contact or immersed fluid–structure boundaries are considered. The parallel acceleration of the solution process is then achieved through a hybrid approach, based on a weighted domain decomposition for distributed memory computing and the use of the KAAPI library for self-balanced shared memory processing inside subdomains

  16. CATHARE simulation of transients for the 2400 MW gas fast reactor concept

    International Nuclear Information System (INIS)

    Bentivoglio, Fabrice; Messie, Anne; Geffraye, Genevieve; Malo, Jean-Yves; Bertrand, Frederic; Plancq, David

    2009-01-01

    The Gas cooled Fast Reactor (GFR) is one of the six reactor concepts selected in the framework of the Generation IV forum and a high priority in the French Commissariat a l'Energie Atomique (CEA) R and D program on the Future Nuclear Energy Systems. A first design of this GFR2400 reactor has been completed by the CEA at the end of year 2005. The main characteristics of the concept are a 2400MW core based on plate type fuel elements, with an inlet temperature of 400degC and an outlet temperature of 850degC. The power conversion system is based on an indirect combined cycle with helium on the primary circuit, a Brayton cycle with a mixture of nitrogen and helium on the secondary circuit and a steam cycle on the tertiary circuit. In accidental situations, the use of the gas coolant circulation as the main way to remove the decay heat has been selected. A specific system (DHR system) has been designed: it consists of three loops (3 * 100% redundancy) in extension of the pressure vessel, equipped with heat exchangers and blowers. Between 2006 and 2007 a pre-conceptual study has been achieve, leading to the CEA milestone project of the 'GFR viability' at the end of year 2007. In the frame of this milestone, a wide range of CATHARE2 transients has been achieved to consolidate and improve the decay heat removal strategy; in particular the DHR blowers working on a large pressure range and the use of natural convection as a second way to remove decay heat. The paper first presents the CATHARE2 code applied to gas cooled reactor, focusing on the dedicated features included in the standard option of the code in order to obtain a multi-fluid reliable and performing tool. Then the modeling of the GFR2400 is presented, including the core, the vessel, the primary and secondary circuit with the turbo-machine, and a simplified tertiary circuit with boundary conditions. The decay heat removal loops (DHR loop) are also modeled, with a first circuit in helium and a secondary circuit in

  17. Modelling, simulation and measurements of fast transients in transformer windings with consideration of frequency-dependent losses

    NARCIS (Netherlands)

    Popov, M.; Sluis, van der L.; Smeets, R.P.P.; Lopez Roldan, J.; Terzija, V.V.

    2007-01-01

    For the specification of winding insulation of transformers, it is important to know the electrical stresses to which the winding can be exposed during fast transient oscillations. These oscillations occur during switching operations performed by circuit breakers, or when gas-insulated substations

  18. A search for radio pulsars and fast transients in M31 using the Westerbork Synthesis Radio Telescope

    NARCIS (Netherlands)

    Rubio-Herrera, E.; Stappers, B.W.; Hessels, J.W.T.; Braun, R.

    2013-01-01

    We present the results of the most sensitive and comprehensive survey yet undertaken for radio pulsars and fast transients in the Andromeda galaxy (M31) and its satellites, using the Westerbork Synthesis Radio Telescope (WSRT) at a central frequency of 328 MHz. We used the WSRT in a special

  19. EXCURS: a computing programme for analysis of core transient behaviour in a sodium cooled fast reactor

    International Nuclear Information System (INIS)

    Saito, Shinzo

    1977-09-01

    In the code EXCURS developed for core transient behaviour calculation of a sodium-cooled fast reactor, a one-channel model is used to represent thermal behaviour of the reactor core. Calculations are made for three different channels; i.e. average, hot and hottest. In the average channel the power density and coolant velocity are equal to the mean values of the whole core. In the hot channel, a maximum power density of the core and a specific coolant velocity are introduced. In the hottest channel, engineering hot channel factors are considered to the hot channel. A one-point neutron kinetics equation with six delayed neutron groups is used to calculate the time-dependent power behaviour. Externally introduced reactivity effect and control rod movement in the case of a scram are taken into account. In the feedback effects evaluated on the basis of the average channel temperatures are considered Doppler effect, fuel axial expansion, cladding expansion, coolant expansion and structure expansion. The decay heat after reactor scram is also considered. Heat balance is taken in each cross section, neglecting the axial heat transfer except for the coolant region. Temperature dependence of the physical properties of materials is considered by second-order polynomials approximation, and also the fuel melting process. Each channel can be divided into a maximum of 20 regions in both radially and axially. The reactor core transient behaviour due to reactivity insertion or loss-of-coolant flow can be studied by EXCURS. The calculated results are plotted optionally by connected code EXPLOT. (auth.)

  20. A LUMINOUS, FAST RISING UV-TRANSIENT DISCOVERED BY ROTSE: A TIDAL DISRUPTION EVENT?

    International Nuclear Information System (INIS)

    Vinkó, J.; Wheeler, J. C.; Chatzopoulos, E.; Marion, G. H.; Yuan, F.; Akerlof, C.; Quimby, R. M.; Ramirez-Ruiz, E.; Guillochon, J.

    2015-01-01

    We present follow-up observations of an optical transient (OT) discovered by ROTSE on 2009 January 21. Photometric monitoring was carried out with ROTSE-IIIb in the optical and Swift in the UV up to +70 days after discovery. The light curve showed a fast rise time of ∼10 days followed by a steep decline over the next 60 days, which was much faster than that implied by 56 Ni— 56 Co radioactive decay. The Sloan Digital Sky Survey Data Release 10 database contains a faint, red object at the position of the OT, which appears slightly extended. This and other lines of evidence suggest that the OT is of extragalactic origin, and this faint object is likely the host galaxy. A sequence of optical spectra obtained with the 9.2 m Hobby-Eberly Telescope between +8 and +45 days after discovery revealed a hot, blue continuum with no visible spectral features. A few weak features that appeared after +30 days probably originated from the underlying host. Fitting synthetic templates to the observed spectrum of the host galaxy revealed a redshift of z = 0.19. At this redshift, the peak magnitude of the OT is close to –22.5, similar to the brightest super-luminous supernovae; however, the lack of identifiable spectral features makes the massive stellar death hypothesis less likely. A more plausible explanation appears to be the tidal disruption of a Sun-like star by the central supermassive black hole. We argue that this transient likely belongs to a class of super-Eddington tidal disruption events

  1. Investigation on in-vessel thermal transients in a fast breeder reactor

    International Nuclear Information System (INIS)

    Muramatsu, Toshiharu; Kasahara, Naoto

    1999-01-01

    Thermal stratification phenomena are observed in an upper plenum of liquid metal fast breeder reactors (LMFBRs) under reactor scram conditions, which give rise to thermal stress on structural components. Therefore it is important to evaluate characteristics of the phenomena in the design of the internal structures in an LMFBR plenum. To evaluate thermal stress characteristics for the inner barrel in a typical LMFBR upper plenum, numerical analysis was carried out with a multi-dimensional thermohydraulics code AQUA for a scram condition from full power operation conditions. Thereafter, thermal stress conditions for the inner barrel were evaluated by the use of a structural analysis code FINAS with the thermohydraulic results calculated by the AQUA code as boundary conditions. From the thermohydraulic analysis and the thermal stress analysis, the following results have been obtained. (1) A large axial temperature gradient was calculated at the region between the upper and lower flow holes located on the inner barrel. The axial position of the thermal stratification interface was fixed in the various circumferential directions. As for the comparison with a 40% operation condition, maximum temperature gradients at the lower flow hole region indicated a 2 times value of that in the 40% operation condition. (2) Transient thermal stratification phenomena were observed after 120 sec from the reactor scram in the numerical results. These tendencies on thermal stratification phenomena were sameness with the transient results from the 40% operation condition. (3) During the reactor trip from full power operation, large temperature gradient in both vertical and sectional direction are enforced around the lower flow hole, since there exists flow pass of low temperature sodium through this hole. As a result, the maximum thermal stress within 32.6 kg/mm 2 was predicted at the lower flow hole when considering stress concentration at the hole edge. (J.P.N.)

  2. Radio emissions from pulsar companions: a refutable explanation for galactic transients and fast radio bursts

    Science.gov (United States)

    Mottez, F.; Zarka, P.

    2014-09-01

    Context. The six known highly dispersed fast radio bursts are attributed to extragalactic radio sources that are of unknown origin but extremely energetic. We propose here a new explanation that does not require an extreme release of energy and involves a body (planet, asteroid, white dwarf) orbiting an extragalactic pulsar. Aims: We investigate a theory of radio waves associated with such pulsar-orbiting bodies. We focus our analysis on the waves emitted from the magnetic wake of the body in the pulsar wind. After deriving their properties, we compare them with the observations of various transient radio signals to determine whether they could originate from pulsar-orbiting bodies. Methods: The analysis is based on the theory of Alfvén wings: for a body immersed in a pulsar wind, a system of two stationary Alfvén waves is attached to the body, provided that the wind is highly magnetised. When they are destabilised through plasma instabilities, Alfvén wings can be the locus of strong radio sources that are convected with the pulsar wind. By assuming a cyclotron maser instability operating in the Alfvén wings, we make predictions about the shape, frequencies, and brightness of the resulting radio emissions. Results: Because of the beaming by relativistic aberration, the signal is seen only when the companion is perfectly aligned between its parent pulsar and the observer, as is the case for occultations. For pulsar winds with a high Lorentz factor (≥104), the whole duration of the radio event does not exceed a few seconds, and it is composed of one to four peaks that last a few milliseconds each and are detectable up to distances of several Mpc. The Lorimer burst, the three isolated pulses of PSR J1928+15, and the recently detected fast radio bursts are all compatible with our model. According to it, these transient signals should repeat periodically with the companion's orbital period. Conclusions: The search of pulsar-orbiting bodies could be an exploration

  3. A fast-evolving luminous transient discovered by K2/Kepler

    Science.gov (United States)

    Rest, A.; Garnavich, P. M.; Khatami, D.; Kasen, D.; Tucker, B. E.; Shaya, E. J.; Olling, R. P.; Mushotzky, R.; Zenteno, A.; Margheim, S.; Strampelli, G.; James, D.; Smith, R. C.; Förster, F.; Villar, V. A.

    2018-04-01

    For decades, optical time-domain searches have been tuned to find ordinary supernovae, which rise and fall in brightness over a period of weeks. Recently, supernova searches have improved their cadences and a handful of fast-evolving luminous transients have been identified1-5. These have peak luminosities comparable to type Ia supernovae, but rise to maximum in less than ten days and fade from view in less than one month. Here we present the most extreme example of this class of object thus far: KSN 2015K, with a rise time of only 2.2 days and a time above half-maximum of only 6.8 days. We show that, unlike type Ia supernovae, the light curve of KSN 2015K was not powered by the decay of radioactive elements. We further argue that it is unlikely that it was powered by continuing energy deposition from a central remnant (a magnetar or black hole). Using numerical radiation hydrodynamical models, we show that the light curve of KSN 2015K is well fitted by a model where the supernova runs into external material presumably expelled in a pre-supernova mass-loss episode. The rapid rise of KSN 2015K therefore probes the venting of photons when a hypersonic shock wave breaks out of a dense extended medium.

  4. Supergiant fast X-ray transients with Swift: Spectroscopic and temporal properties

    Science.gov (United States)

    Romano, P.; Mangano, V.; Ducci, L.; Esposito, P.; Farinelli, R.; Ceccobello, C.; Vercellone, S.; Burrows, D. N.; Kennea, J. A.; Krimm, H. A.; Gehrels, N.

    2012-12-01

    Supergiant fast X-ray transients (SFXTs) are a class of high-mass X-ray binaries with possible counterparts in the high energy gamma rays. The Swift SFXT Project1 has conducted a systematic investigation of the properties of SFTXs on timescales ranging from minutes to years and in several intensity states (from bright flares, to intermediate intensity states, and down to almost quiescence). We also performed broad-band spectroscopy of outbursts, and intensity-selected spectroscopy outside of outbursts. We demonstrated that while the brightest phase of the outburst only lasts a few hours, further activity is observed at lower fluxes for a remarkably longer time, up to weeks. Furthermore, we assessed the fraction of the time these sources spend in each phase, and their duty cycle of inactivity. We present the most recent results from our investigation. The spectroscopic and, most importantly, timing properties of SFXTs we have uncovered with Swift will serve as a guide in search for the high energy emission from these enigmatic objects.

  5. Accidents and transients analyses of a super fast reactor with single flow pass core

    International Nuclear Information System (INIS)

    Sutanto,; Oka, Yoshiaki

    2014-01-01

    Highlights: • Safety analysis of a Super FR with single flow pass core is conducted. • Loss of feed water flow leads to a direct effect on the loss of fuel channel flow. • The core pressure is sensitive to LOCA accidents due to the direct effect. • Small LOCA introduces a critical break. • The safety criteria for all selected events are satisfied. - Abstract: The supercritical water cooled fast reactor with single flow pass core has been designed to simplify refueling and the structures of upper and lower mixing plenums. To evaluate the safety performance, safety analysis has been conducted with regard to LOCA and non-LOCA accidents including transient events. Safety analysis results show that the safety criteria are satisfied for all selected events. The total loss of feed water flow is the most important accident which the maximum cladding surface temperature (MCST) is high due to a direct effect of the accident on the total loss of flow in all fuel assemblies. However, actuation of the ADS can mitigate the accident. Small LOCA also introduces a critical break at 7.8% break which results high MCST at BOC because the scram and ADS are not actuated. Early ADS actuation is effective to mitigate the accident. In large LOCA, 100% break LOCA results a high MCST of flooding phase at BOC due to high power peaking at the bottom part. Use of high injection flow rate by 2 LPCI units is effective to decrease the MCST

  6. Study on time-frequency analysis method of very fast transient overvoltage

    Science.gov (United States)

    Li, Shuai; Liu, Shiming; Huang, Qiyan; Fu, Chuanshun

    2018-04-01

    The operation of the disconnector in the gas insulated substation (GIS) may produce very fast transient overvoltage (VFTO), which has the characteristics of short rise time, short duration, high amplitude and rich frequency components. VFTO can cause damage to GIS and secondary equipment, and the frequency components contained in the VFTO can cause resonance overvoltage inside the transformer, so it is necessary to study the spectral characteristics of the VFTO. From the perspective of signal processing, VFTO is a kind of non-stationary signal, the traditional Fourier transform is difficult to describe its frequency which changes with time, so it is necessary to use time-frequency analysis to analyze VFTO spectral characteristics. In this paper, we analyze the performance of short time Fourier transform (STFT), Wigner-Ville distribution (WVD), pseudo Wigner-Ville distribution (PWVD) and smooth pseudo Wigner-Ville distribution (SPWVD). The results show that SPWVD transform is the best. The time-frequency aggregation of SPWVD is higher than STFT, and it does not have cross-interference terms, which can meet the requirements of VFTO spectrum analysis.

  7. Transient bowing of core assemblies in advanced liquid metal fast reactors

    International Nuclear Information System (INIS)

    Kamal, S.A.; Orechwa, Y.

    1986-01-01

    Two alternative core restraint concepts are considered for a conceptual design of a 900 MWth liquid metal fast reactor core with a heterogeneous layout. The two concepts, known as limited free bowing and free flowering, are evaluated based on core bowing criteria that emphasize the enhancement of inherent reactor safety. The core reactivity change during a postulated loss of flow transient is calculated in terms of the lateral displacements and displacement-reactivity-worths of the individual assemblies. The NUBOW-3D computer code is utilized to determine the assembly deformations and interassembly forces that arise when the assemblies are subjected to temperature gradients and irradiation induced creep and swelling during the reactor operation. The assembly ducts are made of the ferritic steel HT-9 and remain in the reactor core for four-years at full power condition. Whereas both restraint systems meet the bowing criteria, a properly designed limited free bowing system appears to be more advantageous than a free flowering system from the point of view of enhancing the reactor inherent safety

  8. Adaptation and implementation of the TRACE code for transient analysis on designs of cooled lead fast reactors

    International Nuclear Information System (INIS)

    Lazaro, A.; Ammirabile, L.; Martorell, S.

    2014-01-01

    The article describes the changes implemented in the TRACE code to include thermodynamic tables of liquid lead drawn from experimental results. He then explains the process for developing a thermohydraulic model for the prototype ALFRED and analysis of a selection of representative transient conducted within the framework of international research projects. The study demonstrates the applicability of TRACE code to simulate designs of cooled lead fast reactors and exposes the high safety margins are there in this technology to accommodate the most severe transients identified in their security study. (Author)

  9. In Search of Craft

    Science.gov (United States)

    Schwalbe, Michael

    2010-01-01

    In the spring of 2009, this author asked the director of North Carolina State's Crafts Center to help him find people who might be willing to participate in a project about skill. Bill Wallace, an occasional teacher at the Crafts Center, was one of the people recommended to him. Bill Wallace is a man who can look at a tree and instinctively know…

  10. Extending the XFEM approach for fast transient three-dimensional crack propagation in ductile materials

    International Nuclear Information System (INIS)

    Pelee-De-Saint-Maurice, Romains

    2014-01-01

    This PhD thesis presents numerical methods is dedicated to three-dimensional crack propagation in the framework of fast explicit structural dynamics using EUROPLEXUS software (currently abbreviated EPX, co-owned by CEA and EC/JRC). An approach based on the well-known XFEM method is proposed, representing the crack through level set functions. Special care is given to the update of the level set functions from the propagation velocity expressed on the crack edge, since the most widely used method based on the solution of Hamilton-Jacobi equations lacks robustness for fast transient crack propagations, even when level-sets are computed on an auxiliary regular finite difference grid. It is therefore chosen instead to implement a 3D approximated geometric method to update both level-sets. As far as failure mechanics is concerned, a local stress criterion on the edge of the crack, first developed by Haboussa et al., gives characteristic parameters of the material fracture. Mechanical equivalent quantities (strain, deformation) around the crack front are weighted by a Gaussian function, which gives more importance to Gauss integration points located near the crack tip. The maximum of the equivalent stress tensor near the crack tip gives the direction of the crack, and the Kanninen equation gives the crack velocity. Besides, because of the discontinuous displacement field, the numerical integration for elements cut by the crack yields performance issues. Increasing the number of quadrature points is CPU time consuming and quite hard to handle if it is chosen to change the number of points only for elements in the vicinity of the crack. Another approach tested here consists in keeping constant the number and position of quadrature points and modifying their weights in cut elements to obtain an accurate integration of several reference discontinuous fields. The proposed methods are tested and validated on significant examples, both two-dimensional, to ensure the backward

  11. Numerical scheme of WAHA code for simulation of fast transients in piping systems

    International Nuclear Information System (INIS)

    Iztok Tiselj

    2005-01-01

    Full text of publication follows: A research project of the 5. EU program entitled 'Two-phase flow water hammer transients and induced loads on materials and structures of nuclear power plants' (WAHA loads) has been initiated in Fall 2000 and ended in Spring 2004. Numerical scheme used in WAHA code is responsibility of 'Jozef Stefan Institute and is briefly described in the present work. Mathematical model is based on a 6-equation two-fluid model for inhomogeneous non-equilibrium two-phase flow, which can be written in vectorial form as: A δΨ-vector/δt + B δΨ-vector/δx = S-vector. Hyperbolicity of the equations is a prerequisite and is ensured with virtual mass term and interfacial pressure term, however, equations are not unconditionally hyperbolic. Flow-regime map used in WAHA code consists of dispersed, and horizontally stratified flow correlations. The closure laws describe interface heat and mass transfer (condensation model, flashing...), the inter-phase friction, and wall friction. For the modeling of water hammer additional terms due to the pipe elasticity are considered. For the calculation of the thermodynamic state a new set of water properties subroutines was created. Numerical scheme of the WAHA code is based on Godunov characteristic upwind methods. Advanced numerical methods based on high-resolution shock-capturing schemes, which were originally developed for high-speed gas dynamics are used. These schemes produce solutions with a substantially reduced numerical diffusion and allow the accurate modeling of flow discontinuities. Code is using non-conservative variables Ψ-vector = (p, α, ν f , ν g , u f , u g ), however, according to current experience, the non-conservation is not a major problem for the fast transients like water hammers. The following operator splitting is used in the code: 1) Convection and non-relaxation source terms: A δΨ-vector/δt + B δΨ-vector/δx S-vector non relaxation 2) Relaxation (inter-phase exchange) source

  12. Implementing digital crafting : developing

    DEFF Research Database (Denmark)

    Tamke, Martin; Ramsgaard Thomsen, Mette

    2010 in the Danish Design Centre in Copenhagen. The exhibition presents 18 designers, architects and people from the crafts that have an innovative take on the future questions of sustainability, new materials and technology. Their products challenge traditional Danish Design and are yet interconnected...... in the countries traits and the way they design. Curated by the Danish Design Centre, The Danish Architectural Centre and the Danish Crafts Organisation groups of three from the different disciplines were identified in 6 scenarios with distinct expression....

  13. Construction of a High Temporal-spectral Resolution Spectrometer for Detection of Fast Transients from Observations of the Sun at 1.4 GHz.

    Science.gov (United States)

    Casillas-Perez, G. A.; Jeyakumar, S.; Perez-Enriquez, R.

    2014-12-01

    Transients explosive events with time durations from nanoseconds to several hours, are observed in the Sun at high energy bands such as gamma ray and xray. In the radio band, several types of radio bursts are commonly detected from the ground. A few observations of the Sun in the past have also detected a new class of fast transients which are known to have short-live electromagnetic emissions with durations less than 100 ms. The mechanisms that produce such fast transiets remain unclear. Observations of such fast transients over a wide bandwidth is necessary to uderstand the underlying physical process that produce such fast transients. Due to their very large flux densities, fast radio transients can be observed at high time resolution using small antennas in combination with digital signal processing techniques. In this work we report the progress of an spectrometer that is currently in construction at the Observatorio de la Luz of the Universidad de Guanajuato. The instrument which will have the purpose of detecting solar fast radio transients, involves the use of digital devices such as FPGA and ADC cards, in addition with a receiver with high temporal-spectral resolution centered at 1.4 GHz and a pair of 2.3 m satellite dish.

  14. Influence of fast and slow alkali myosin light chain isoforms on the kinetics of stretch-induced force transients of fast-twitch type IIA fibres of rat.

    Science.gov (United States)

    Andruchov, Oleg; Galler, Stefan

    2008-03-01

    This study contributes to understand the physiological role of slow myosin light chain isoforms in fast-twitch type IIA fibres of skeletal muscle. These isoforms are often attached to the myosin necks of rat type IIA fibres, whereby the slow alkali myosin light chain isoform MLC1s is much more frequent and abundant than the slow regulatory myosin light chain isoform MLC2s. In the present study, single-skinned rat type IIA fibres were maximally Ca(2+) activated and subjected to stepwise stretches for causing a perturbation of myosin head pulling cycles. From the time course of the resulting force transients, myosin head kinetics was deduced. Fibres containing MLC1s exhibited slower kinetics independently of the presence or absence of MLC2s. At the maximal MLC1s concentration of about 75%, the slowing was about 40%. The slowing effect of MLC1s is possibly due to differences in the myosin heavy chain binding sites of the fast and slow alkali MLC isoforms, which changes the rigidity of the myosin neck. Compared with the impact of myosin heavy chain isoforms in various fast-twitch fibre types, the influence of MLC1s on myosin head kinetics of type IIA fibres is much smaller. In conclusion, the physiological role of fast and slow MLC isoforms in type IIA fibres is a fine-tuning of the myosin head kinetics.

  15. Tetanic Ca2+ transient differences between slow- and fast-twitch mouse skeletal muscle fibres: a comprehensive experimental approach.

    Science.gov (United States)

    Calderón, Juan C; Bolaños, Pura; Caputo, Carlo

    2014-12-01

    One hundred and eighty six enzymatically dissociated murine muscle fibres were loaded with Mag-Fluo-4 AM, and adhered to laminin, to evaluate the effect of modulating cytosolic Ca(2+) buffers and sarcoendoplasmic reticulum Ca(2+) ATPase (SERCA), mitochondria, and Na(+)/Ca(2+) exchanger (NCX) on the differential tetanic Ca(2+) transient kinetics found in different fibre types. Tetanic Ca(2+) transients were classified as morphology type I (MT-I) or type II (MT-II) according to their shape. The first peak of the MT-I (n = 25) and MT-II (n = 23) tetanic Ca(2+) transients had an amplitude (∆F/F) of 0.41 ± 0.03 and 0.83 ± 0.05 and a rise time (ms) of 1.35 and 0.98, respectively. MT-I signals had a time constant of decay (τ1, ms) of 75.9 ± 4.2 while MT-II transients showed a double exponential decay with time constants of decay (τ1 and τ2, ms) of 18.3 ± 1.4 and 742.2 ± 130.3. Sarcoendoplasmic reticulum Ca(2+) ATPase inhibition demonstrated that the decay phase of the tetanic transients mostly rely on SERCA function. Adding Ca(2+) chelators in the AM form to MT-I fibres changed the morphology of the initial five peaks to a MT-II one, modifying the decay phase of the signal in a dose-dependent manner. Mitochondria and NCX function have a minor role in explaining differences in tetanic Ca(2+) transients among fibre types but still help in removing Ca(2+) from the cytosol in both MT-I and MT-II fibres. Cytoplasmic Ca(2+) buffering capacity and SERCA function explain most of the different kinetics found in tetanic Ca(2+) transients from different fibre types, but mitochondria and NCX have a measurable role in shaping tetanic Ca(2+) responses in both slow and fast-twitch muscle fibre types. We provided experimental evidence on the mechanisms that help understand the kinetics of tetanic Ca(2+) transients themselves and explain kinetic differences found among fibre types.

  16. The meaning of craft: craft makers' descriptions of craft as an occupation.

    Science.gov (United States)

    Pöllänen, Sinikka

    2013-05-01

    The aim of this study is to examine how craft makers describe the meaning of craft as an activity in relation to their well-being. The study is based on an analysis of the written narratives of 92 textile craft makers aged 16 to 84. Based on the results, the well-being enhancing nature of craft as a meaningful occupation for those interested in crafting is evident. The significance of craft making as an occupation is described by the following three themes: (a) "the meaning and value of crafts", (b) "the feelings experienced during craft activity", and (c) "the holisticity and intentionality of craft-making". As an activity and a metaphor, craft making helped the participants to adjust to life situations. Elements of craft that enhance well-being can be traced to both the artefacts and the sense of achievement gained in producing them. The effects of craft include personal growth, development of physical and cognitive skills, control of one's body, thoughts, and feelings, as well as cultural and social awareness. The results indicate that the participants noticed the significance of craft as an agony- and stress-reducing and mind-calming activity. Holistic craft and ordinary craft played different roles in maintaining well-being.

  17. Characterization of the 20 kHz transient MHD burst at the fast U-3M confinement modification stage

    Science.gov (United States)

    Dreval, M. B.; Pavlichenko, R. O.; Shapoval, A. M.; Pashnev, V. K.; Sorokovoy, E. L.; Slavnyj, A. S.; Beletskii, A. A.; Mironov, Yu K.; Romanov, V. S.; Kulaga, A. E.; Zamanov, N. V.

    2018-05-01

    In the URAGAN-3M (U-3M) torsatron the low-frequency transient 20–30 kHz mode is observed during the plasma confinement transition that occurs at a plasma current value of about 1 kA. The burst of this mode is always accompanied by the fast jump of the Alfvén eigenmode frequency. The transient 20–30 kHz mode contains two parts. The non-rotating part of the mode has higher amplitude and is localized in the stochastic region of the plasma. It is observed only in the vicinity of the radio-frequency antenna used for plasma production and does not propagate along the torus because of fast losses. Its high amplitude indicates that the major part of the 20–30 kHz mode is excited in the stochastic region near the antenna. In contrast, the second rotating part of the mode is localized everywhere along the torus near the plasma edge (ρ = 0.8–1). This is the n/m = 1/2 mode that rotates in the electron diamagnetic direction. It is observed in different toroidal cross-sections by various diagnostics (magnetic probe array, optics, Langmuir probe). Appearance of the 1/2 rational surface at the stochastic magnetic field line region near the plasma edge at 1 kA plasma current stage can be responsible for the mode generation. Modification of electron component gradients in the mode generation region near the antenna and the drop of the fast ion concentration (above 1 keV) in this region are observed simultaneously with the mode generation. The mode can be exited by the strong transient plasma gradients generated in the vicinity of the rational surface by the antenna.

  18. THE XMM-Newton and integral observations of the Supergiant Fast X-Ray Transient IGR J16328-4726

    OpenAIRE

    Fiocchi, M.; Bazzano, A.; Natalucci, L.; Ubertini, P.; Sguera, V.; Bird, A. J.; Boon, C.M.; Persi, P.; Piro, L.

    2016-01-01

    The accretion mechanism producing the short flares observed from the Supergiant Fast X-ray Transients (SFXT) is still highly debated and forms a major part in our attempts to place these X-ray binaries in the wider context of the High Mass X-ray Binaries. We report on a 216 ks INTEGRAL observation of the SFXT IGR J16328-4726 (2014 August 24–27) simultaneous with two fixed-time observations with XMM-Newton (33 and 20 ks) performed around the putative periastron passage, in order to investigate...

  19. Advanced parallel strategy for strongly coupled fast transient fluid-structure dynamics with dual management of kinematic constraints

    International Nuclear Information System (INIS)

    Faucher, Vincent

    2014-01-01

    Simulating fast transient phenomena involving fluids and structures in interaction for safety purposes requires both accurate and robust algorithms, and parallel computing to reduce the calculation time for industrial models. Managing kinematic constraints linking fluid and structural entities is thus a key issue and this contribution promotes a dual approach over the classical penalty approach, introducing arbitrary coefficients in the solution. This choice however severely increases the complexity of the problem, mainly due to non-permanent kinematic constraints. An innovative parallel strategy is therefore described, whose performances are demonstrated on significant examples exhibiting the full complexity of the target industrial simulations. (authors)

  20. Transient impairment of the adaptive response to fasting in FXR-deficient mice

    NARCIS (Netherlands)

    Cariou, B; van Harmelen, K; Duran-Sandoval, D; van Dijk, T; Grefhorst, A; Bouchaert, E; Fruchart, JC; Gonzalez, FJ; Kuipers, F; Staels, B

    2005-01-01

    The farnesoid X receptor (FXR) has been suggested to play a role in gluconeogenesis. To determine whether FXR modulates the response to fasting in vivo, FXR-deficient (FXR-/-) and wild-type mice were submitted to fasting for 48 h. Our results demonstrate that FXR modulates the kinetics of

  1. Mechanical behavior of fast reactor fuel pin cladding subjected to simulated overpower transients

    International Nuclear Information System (INIS)

    Johnson, G.D.; Hunter, C.W.

    1978-06-01

    Cladding mechanical property data for analysis and prediction of fuel pin transient behavior were obtained under experimental conditions in which the temperature ramps of reactor transients were simulated. All cladding specimens were 20% CW Type 316 stainless steel and were cut from EBR-II irradiated fuel pins. It was determined that irradiation degraded the cladding ductility and failure strength. Specimens that had been adjacent to the fuel exhibited the poorest properties. Correlations were developed to describe the effect of neutron fluence on the mechanical behavior of the cladding. Metallographic examinations were conducted to characterize the failure mode and to establish the nature of internal and external surface corrosion. Various mechanisms for the fuel adjacency effect were examined and results for helium concentration profiles were presented. Results from the simulated transient tests were compared with TREAT test results

  2. Transient feedback from fuel motion in metal IFR [Integral Fast Reactor] fuel

    International Nuclear Information System (INIS)

    Rhodes, E.A.; Stanford, G.S.; Regis, J.P.; Bauer, T.H.; Dickerman, C.E.

    1990-01-01

    Results from hodoscope data analyses are presented for TREAT transient-overpower tests M5 through M7 with emphasis on transient feedback mechanisms, including prefailure expansion at the tops of the fuel pins, subsequent dispersive axial fuel motion, and losses in relative worth of the fuel pins during the tests. Tests M5 and M6 were the first TOP tests of margin to cladding branch and prefailure elongation of D9-clad ternary (U-Pu-Zr) IFR-type fuel. Test M7 extended these results to high-burnup fuel and also initiated transient testing of HT9-clad binary (U-Zr) FFTF-driver fuel. Results show significant prefailure negative reactivity feedback and strongly negative feedback from fuel driven to failure. 4 refs., 6 figs

  3. Fuel pin behavior under slow ramp-type transient-overpower conditions in the CABRI-FAST experiments

    International Nuclear Information System (INIS)

    Fukano, Yoshitaka; Onoda, Yuichi; Sato, Ikken; Charpenel, Jean

    2009-01-01

    In the CABRI-FAST experimental program, four in-pile tests were performed with slow power-ramp-type transient-overpower conditions (called hereafter as 'slow TOP') to study transient fuel pin behavior under inadvertent control rod withdrawal events in liquid metal cooled fast breeder reactors. Annular-pellet fuel pins were used in three tests, while a solid-pellet fuel pin was used in the other test. All of these pins were pre-irradiated in Phenix. The slow TOP test with a solid-pellet fuel pin was realized as a comparatory test against an existing test (E12) in the CABRI-2 program. In the CABRI-FAST test (BCF1), a power ramp rate of 3% Po/s was applied, while in the CABRI-2 test, 1% Po/s was adopted. Moreover, overpower condition was maintained for a few seconds beyond the observed pin failure in the BCF1 test. In spite of the different power ramp rates, evaluated fuel thermal conditions at the observed failure time are quite similar. The continued overpower condition in the BCF1 test resulted in gradual degradation of the pin structure providing information effective for evaluation of various accident scenarios. Three slow TOP tests with the annular fuel in the CABRI-FAST program resulted in no pin failure showing high failure threshold. Based on post-test examination data and a theoretical evaluation, it was concluded that intra-pin free spaces, such as central hole, macroscopic cracks and fuel-cladding gap effectively mitigated fuel cladding mechanical interaction. It was also clarified that cavity pressurization became effective only in case of very large amount of fuel melting. Furthermore, such cavity pressurization was effectively mitigated by a molten-fuel squirting into the upper blanket region pushing the blanket pellets upward. These CABRI FAST slow TOP tests, in combination with the existing CABRI and TREAT tests, provided an extended slow TOP test database with various fuel and transient conditions. (author)

  4. Fast transient current response to switching events in short chains of molecular islands

    Czech Academy of Sciences Publication Activity Database

    Kalvová, Anděla; Špička, Václav; Velický, B.

    2013-01-01

    Roč. 26, č. 4 (2013), s. 773-777 ISSN 1557-1939 R&D Projects: GA ČR GAP204/12/0897 Institutional support: RVO:68378271 Keywords : nonequilibrium * molecular islands * initial correlations * transient currents Subject RIV: BE - Theoretical Physics Impact factor: 0.930, year: 2013

  5. On the major DYN3D developments for fast reactor design and transient analysis

    International Nuclear Information System (INIS)

    Merk, B.; Kliem, S.

    2013-01-01

    Due to the French project ASTRID, the European CP-ESFR project, and the MYRRHA/FASTEF project, the research work on fast reactors has got a new push in Europe. Additionally to this European projects a strong project is growing in Russia based on the lead cooled fast reactor design BREST. Following this trend, the Institute of Resource Ecology at the Helmholtz-Zentrum Dresden-Rossendorf has decided to start several projects dedicated to fast reactor technology, among them the extension of the well validated LWR core simulator DYN3D. The new developments, first validation results, and the next strategic steps for the adaption of the code for the improved simulation of fast reactor cores are presented. (orig.)

  6. On the major DYN3D developments for fast reactor design and transient analysis

    Energy Technology Data Exchange (ETDEWEB)

    Merk, B.; Kliem, S. [Helmholtz-Zentrum Dresden-Rossendorf e.V., Dresden (Germany). Reactor Safety Div.

    2013-07-01

    Due to the French project ASTRID, the European CP-ESFR project, and the MYRRHA/FASTEF project, the research work on fast reactors has got a new push in Europe. Additionally to this European projects a strong project is growing in Russia based on the lead cooled fast reactor design BREST. Following this trend, the Institute of Resource Ecology at the Helmholtz-Zentrum Dresden-Rossendorf has decided to start several projects dedicated to fast reactor technology, among them the extension of the well validated LWR core simulator DYN3D. The new developments, first validation results, and the next strategic steps for the adaption of the code for the improved simulation of fast reactor cores are presented. (orig.)

  7. Fast reactor fuel failures and steam generator leaks: Transient and accident analysis approaches

    International Nuclear Information System (INIS)

    1996-10-01

    This report consists of a survey of activities on transient and accident analysis for the LMFR. It is focused on the following subjects: Fuel transient tests and analyses in hypothetical incident/accident situations; sodium-water interaction in steam generators, and sodium fires: test and analyses. There are also sections dealing with the experimental and analytical studies of: fuel subassembly failures; sodium boiling, molten fuel-coolant interaction; molten material movement and relocation in fuel bundles; heat removal after an accident or incident; sodium-water reaction in steam generator; steam generator protection systems; sodium-water contact in steam generator building; fire-fighting methods and systems to deal with sodium fires. Refs, figs, tabs

  8. Transient phases during fast crystallization of organic thin films from solution

    Science.gov (United States)

    Wan, Jing; Li, Yang; Ulbrandt, Jeffrey G.; Smilgies, Detlef-M.; Hollin, Jonathan; Whalley, Adam C.; Headrick, Randall L.

    2016-01-01

    We report an in situ microbeam grazing incidence X-ray scattering study of 2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene (C8-BTBT) organic semiconductor thin film deposition by hollow pen writing. Multiple transient phases are observed during the crystallization for substrate temperatures up to ≈93 °C. The layered smectic liquid-crystalline phase of C8-BTBT initially forms and preceedes inter-layer ordering, followed by a transient crystalline phase for temperature >60 °C, and ultimately the stable phase. Based on these results, we demonstrate a method to produce extremely large grain size and high carrier mobility during high-speed processing. For high writing speed (25 mm/s), mobility up to 3.0 cm2/V-s has been observed.

  9. Transient phases during fast crystallization of organic thin films from solution

    Directory of Open Access Journals (Sweden)

    Jing Wan

    2016-01-01

    Full Text Available We report an in situ microbeam grazing incidence X-ray scattering study of 2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene (C8-BTBT organic semiconductor thin film deposition by hollow pen writing. Multiple transient phases are observed during the crystallization for substrate temperatures up to ≈93 °C. The layered smectic liquid-crystalline phase of C8-BTBT initially forms and preceedes inter-layer ordering, followed by a transient crystalline phase for temperature >60 °C, and ultimately the stable phase. Based on these results, we demonstrate a method to produce extremely large grain size and high carrier mobility during high-speed processing. For high writing speed (25 mm/s, mobility up to 3.0 cm2/V-s has been observed.

  10. RAP-2A Computer code for transients analysis in fast reactors

    International Nuclear Information System (INIS)

    Iftode, I.; Popescu, C.; Turcu, I.; Biro, L.

    1975-10-01

    The RAP-2A computer code is designed for analyzing thermohydraulic transients and/or steady state problems for large LMFBR cores. Physical and mathematical models, main input-output data, the flow chart of the code and a sample problem are given. RAP-2A calculates the power and the thermoydraulic transients initiated by a flow or reactivity changes, from a normal operating state of the reactor up to core disassembly. In this analysis a representative fuel pin is considered: a one-group space-independent (point) kinetics model to describe the neutron kinetics and a one-dimensional model describing the heat transfer (radial in the fuel and axial in the coolant) are used. Mechanical deformations due to temperature gradient, pressure losses, fuel melting, etc., are also calculated. The code is written in FORTRAN-4 language and is running on a IBM-370/135 computer

  11. Performance of fast reactor mixed-oxide fuels pins during extended overpower transients

    International Nuclear Information System (INIS)

    Tsai, H.; Neimark, L.A.; Asaga, T.; Shikakura, S.

    1991-02-01

    The Operational Reliability Testing (ORT) program, a collaborative effort between the US Department of Energy and the Power Reactor and Nuclear Fuel Development Corp. (PNC) of Japan, was initiated in 1982 to investigate the behavior of mixed-oxide fuel pin under various slow-ramp transient and duty-cycle conditions. In the first phase of the program, a series of four extended overpower transient tests, with severity sufficient to challenge the pin cladding integrity, was conducted. The objectives of the designated TOPI-1A through -1D tests were to establish the cladding breaching threshold and mechanisms, and investigate the thermal and mechanical effects of the transient on pin behavior. The tests were conducted in EBR-2, a normally steady-state reactor. The modes of transient operation in EBR-2 were described in a previous paper. Two ramp rates, 0.1%/s and 10%/s, were selected to provide a comparison of ramp-rate effects on fuel behavior. The test pins chosen for the series covered a range of design and pre-test irradiation parameters. In the first test (1A), all pins maintained their cladding integrity during the 0.1%/s ramp to 60% peak overpower. Fuel pins with aggressive designs, i.e., high fuel- smear density and/or thin cladding, were, therefore, included in the follow-up 1B and 1C tests to enhance the likelihood of achieving cladding breaching. In the meantime, a higher pin overpower capability, to greater than 100%, was established by increasing the reactor power limit from 62.5 to 75 MWt. In this paper, the significant results of the 1B and 1C tests are presented. 4 refs., 5 figs., 1 tab

  12. 8-bit serial-parallel analog-to-digital converter for fast transient recorder

    International Nuclear Information System (INIS)

    Kulka, Z.; Nadachowski, M.; Zimek, Z.

    1990-08-01

    An 8-bit serial-parallel analog-to-digital converter with a sampling frequency 5 MHz is described. The most important circuits of the device are described and parameters are given. The converter is a central part of a transient recorder type TR-1 designed for recording pulse waveforms in measurements of the kinetics of chemical reactions which are radiation-induced using an electron linear accelerator. 9 refs., 9 figs. (author)

  13. A fast transient response low dropout regulator with current control methodology

    Energy Technology Data Exchange (ETDEWEB)

    Ma Zhuo; Guo Yang; Duan Zhikui; Xie Lunguo; Chen Jihua; Yu Jinshan, E-mail: guoyang@nudt.edu.cn [School of Computer, National University of Defense Technology, Changsha 410073 (China)

    2011-08-15

    A transient performance optimized CCL-LDO regulator is proposed. In the CCL-LDO, the control method of the charge pump phase-locked loop is adopted. A current control loop has the feedback signal and reference current to be compared, and then a loop filter generates the gate voltage of the power MOSFET by integrating the error current. The CCL-LDO has the optimized damping coefficient and natural resonant frequency, while its output voltage can be sub-1-V and is not restricted by the reference voltage. With a 1 {mu}F decoupling capacitor, the experimental results based on a 0.13 {mu}m CMOS process show that the output voltage is 1.0 V; when the workload changes from 100 {mu}A to 100 mA transiently, the stable dropout is 4.25 mV, the settling time is 8.2 {mu}s and the undershoot is 5.11 mV; when the workload changes from 100 mA to 100 {mu}A transiently, the stable dropout is 4.25 mV, the settling time is 23.3 {mu}s and the overshoot is 6.21 mV. The PSRR value is more than -95 dB. Most of the attributes of the CCL-LDO are improved rapidly with a FOM value of 0.0097.

  14. A fast transient response low dropout regulator with current control methodology

    International Nuclear Information System (INIS)

    Ma Zhuo; Guo Yang; Duan Zhikui; Xie Lunguo; Chen Jihua; Yu Jinshan

    2011-01-01

    A transient performance optimized CCL-LDO regulator is proposed. In the CCL-LDO, the control method of the charge pump phase-locked loop is adopted. A current control loop has the feedback signal and reference current to be compared, and then a loop filter generates the gate voltage of the power MOSFET by integrating the error current. The CCL-LDO has the optimized damping coefficient and natural resonant frequency, while its output voltage can be sub-1-V and is not restricted by the reference voltage. With a 1 μF decoupling capacitor, the experimental results based on a 0.13 μm CMOS process show that the output voltage is 1.0 V; when the workload changes from 100 μA to 100 mA transiently, the stable dropout is 4.25 mV, the settling time is 8.2 μs and the undershoot is 5.11 mV; when the workload changes from 100 mA to 100 μA transiently, the stable dropout is 4.25 mV, the settling time is 23.3 μs and the overshoot is 6.21 mV. The PSRR value is more than -95 dB. Most of the attributes of the CCL-LDO are improved rapidly with a FOM value of 0.0097.

  15. Experimental and numerical investigation of the coolant mixing during fast deboration transients

    International Nuclear Information System (INIS)

    Hoehne, T.; Rohde, U.; Weiss, F.P.

    1999-01-01

    For the analysis of boron dilution transients and main steam line break scenarios the modeling of the coolant mixing inside the reactor vessel is important, because the reactivity insertion strongly depends on boron acid concentration or the coolant temperature distribution. Calculations for steady state flow conditions for the VVER-440 were performed with a CFD code (CFX-4). The comparison with experimental data and an analytical mixing model which is implemented in the neutron-kinetic code DYN3D showed a good agreement for near-nominal conditions. First experiments at the Rossendorf Mixing Test Facility ROCOM were performed simulating the start-up of the first main coolant pump. The reference reactor for the geometrically 1:5 scaled Plexiglas model is the German Konvoi type PWR. After demonstrating the capability of the CFD code to simulate these complicated flow transients, calculations were performed for the start-up of the first pump in a VVER-440 type reactor. These calculations are a first step of understanding the coolant mixing in the RPV of a VVER-440 type reactor under transient conditions. The results of the calculation show a very complex flow in the downcomer. A high downcomer of VVER-440 and the existence of the lower control rod chamber support coolant mixing is concluded. (author)

  16. Application of synthesis methods to two-dimensional fast reactor transient study

    International Nuclear Information System (INIS)

    Izutsu, Sadayuki; Hirakawa, Naohiro

    1978-01-01

    Space time synthesis and time synthesis codes were developed and applied to the space-dependent kinetics benchmark problem of a two-dimensional fast reactor model, and it was found both methods are accurate and economical for the fast reactor kinetics study. Comparison between the space time synthesis and the time synthesis was made. Also, in space time synthesis, the influence of the number of trial functions on the error and on the computing time and the effect of degeneration of expansion coefficients are investigated. The matrix factorization method is applied to the inversion of the matrix equation derived from the synthesis equation, and it is indicated that by the use of this scheme space-dependent kinetics problem of a fast reactor can be solved efficiently by space time synthesis. (auth.)

  17. Josiah Wedgwood, Manufacturing and Craft

    DEFF Research Database (Denmark)

    Holt, Robin; Popp, Andrew

    2016-01-01

    Craft and industrial manufacture are often seen as dichotomous, with craft being marginalized during the process of industrialization. We want to look beyond this position, searching for craft in places where it has gone unnoticed and where it might have bloomed anew in the interstices created...

  18. The craft of screenwriting

    NARCIS (Netherlands)

    Weijers, G.W.M.

    2014-01-01

    Isn't it ironic? Screenwriting is not something you learn from a book, or a talent that just falls into your lap. Nevertheless, without talent you will never become a great scriptwriter. Above all scriptwriting is a craft that you learn to master by writing, reflecting, and rewriting time after

  19. Reliability of fast reactor mixed-oxide fuel during operational transients

    International Nuclear Information System (INIS)

    Boltax, A.; Neimark, L.A.; Tsai, Hanchung; Katsuragawa, M.; Shikakura, S.

    1991-07-01

    Results are presented from the cooperative DOE and PNC Phase 1 and 2 operational transient testing programs conducted in the EBR-2 reactor. The program includes second (D9 and PNC 316 cladding) and third (FSM, AST and ODS cladding) generation mixed-oxide fuel pins. The irradiation tests include duty cycle operation and extended overpower tests. the results demonstrate the capability of second generation fuel pins to survive a wide range of duty cycle and extended overpower events. 15 refs., 9 figs., 4 tabs

  20. The High Time Resolution Universe surveys for pulsars and fast transients

    Science.gov (United States)

    Keith, Michael J.

    2013-03-01

    The High Time Resolution Universe survey for pulsars and transients is the first truly all-sky pulsar survey, taking place at the Parkes Radio Telescope in Australia and the Effelsberg Radio Telescope in Germany. Utilising multibeam receivers with custom built all-digital recorders the survey targets the fastest millisecond pulsars and radio transients on timescales of 64 μs to a few seconds. The new multibeam digital filter-bank system at has a factor of eight improvement in frequency resolution over previous Parkes multibeam surveys, allowing us to probe further into the Galactic plane for short duration signals. The survey is split into low, mid and high Galactic latitude regions. The mid-latitude portion of the southern hemisphere survey is now completed, discovering 107 previously unknown pulsars, including 26 millisecond pulsars. To date, the total number of discoveries in the combined survey is 135 and 29 MSPs These discoveries include the first magnetar to be discovered by it's radio emission, unusual low-mass binaries, gamma-ray pulsars and pulsars suitable for pulsar timing array experiments.

  1. Validation of models for the analysis of the transient behavior of metallic fast reactor fuel

    International Nuclear Information System (INIS)

    Kramer, J.M.; Hughes, T.H.; Gruber, E.E.

    1989-01-01

    The Integral Fast Reactor (IFR) concept being developed at Argonne National Laboratory has prompted a renewed interest in U-Pu-Zr metal alloys as a fuel for sodium-cooled fast reactors. Part of the attractiveness of the IFR concept is the improvement in reactor safety margins through inherent features of a metal-fueled LMR core. In order to demonstrate these safety margins it is necessary to have computer codes available to analyze the detailed response of metallic fuel to a wide range of accident initiators. Two of the codes that play a key role in assessing this response are the STARS fission gas behavior code and the FPIN2 fuel pin mechanics code. Verification and validation are two important components in the development of models and computer codes. Verification demonstrates through comparison of calculations with analytical solutions that the methodology and algorithms correctly solve the equations that govern the phenomena being modeled. Validation, on the other hand, demonstrates through comparison with data that the phenomena are being modeled correctly. Both components are necessary in order to have the confidence to extrapolate the calculations to reactor accident conditions. This paper presents the results of recent progress in the validation of models for the analysis of the behavior of metallic fast reactor fuel. 9 refs., 7 figs

  2. Application of sensitivity analysis to a simplified coupled neutronic thermal-hydraulics transient in a fast reactor using Adjoint techniques

    International Nuclear Information System (INIS)

    Gilli, L.; Lathouwers, D.; Kloosterman, J.L.; Van der Hagen, T.H.J.J.

    2011-01-01

    In this paper a method to perform sensitivity analysis for a simplified multi-physics problem is presented. The method is based on the Adjoint Sensitivity Analysis Procedure which is used to apply first order perturbation theory to linear and nonlinear problems using adjoint techniques. The multi-physics problem considered includes a neutronic, a thermo-kinetics, and a thermal-hydraulics part and it is used to model the time dependent behavior of a sodium cooled fast reactor. The adjoint procedure is applied to calculate the sensitivity coefficients with respect to the kinetic parameters of the problem for two reference transients using two different model responses, the results obtained are then compared with the values given by a direct sampling of the forward nonlinear problem. Our first results show that, thanks to modern numerical techniques, the procedure is relatively easy to implement and provides good estimation for most perturbations, making the method appealing for more detailed problems. (author)

  3. Experimental and numerical investigation of the coolant mixing during fast deboration transients

    International Nuclear Information System (INIS)

    Hoehne, T.; Rohde, U.; Weiss, F.P.

    1999-01-01

    For the analysis of boron dilution transients and main steam line break scenarios the modeling of the coolant mixing inside the reactor vessel is important, because the reactivity insertion strongly depends on boron acid concentration or the coolant temperature distribution. Calculations for steady state flow conditions for the WWER-440 were performed with a CFD code (CFX-4). For this calculation the RPV from the cold legs inlet through the downcomer, the lower plenum and the lower core support plate was nodulized in detail. The comparison with experimental data and analytical mixing model which is implemented in the neutron kinetic code DYN3D showed a good agreement for near-nominal conditions (all MCPs are running). The comparison between the CFD-results and the analytical model revealed differences for MSLB conditions[1]. (Authors)

  4. Fast and efficient STT switching in MTJ using additional transient pulse current

    Science.gov (United States)

    Pathak, Sachin; Cha, Jongin; Jo, Kangwook; Yoon, Hongil; Hong, Jongill

    2017-06-01

    We propose a profile of write pulse current-density to switch magnetization in a perpendicular magnetic tunnel junction to reduce switching time and write energy as well. Our simulated results show that an overshoot transient pulse current-density (current spike) imposed to conventional rectangular-shaped pulse current-density (main pulse) significantly improves switching speed that yields the reduction in write energy accordingly. For example, we could dramatically reduce the switching time by 80% and thereby reduce the write energy over 9% in comparison to the switching without current spike. The current spike affects the spin dynamics of the free layer and reduces the switching time mainly due to spin torque induced. On the other hand, the large Oersted field induced causes changes in spin texture. We believe our proposed write scheme can make a breakthrough in magnetic random access memory technology seeking both high speed operation and low energy consumption.

  5. An efficient hybrid scheme for fast and accurate inversion of airborne transient electromagnetic data

    DEFF Research Database (Denmark)

    Christiansen, Anders Vest; Auken, Esben; Kirkegaard, Casper

    2016-01-01

    Airborne transient electromagnetic (TEM) methods target a range of applications that all rely on analysis of extremely large datasets, but with widely varying requirements with regard to accuracy and computing time. Certain applications have larger intrinsic tolerances with regard to modelling...... inaccuracy, and there can be varying degrees of tolerance throughout different phases of interpretation. It is thus desirable to be able to tune a custom balance between accuracy and compute time when modelling of airborne datasets. This balance, however, is not necessarily easy to obtain in practice....... Typically, a significant reduction in computational time can only be obtained by moving to a much simpler physical description of the system, e.g. by employing a simpler forward model. This will often lead to a significant loss of accuracy, without an indication of computational precision. We demonstrate...

  6. Flavodiiron Proteins Promote Fast and Transient O2 Photoreduction in Chlamydomonas.

    Science.gov (United States)

    Chaux, Frédéric; Burlacot, Adrien; Mekhalfi, Malika; Auroy, Pascaline; Blangy, Stéphanie; Richaud, Pierre; Peltier, Gilles

    2017-07-01

    During oxygenic photosynthesis, the reducing power generated by light energy conversion is mainly used to reduce carbon dioxide. In bacteria and archae, flavodiiron (Flv) proteins catalyze O 2 or NO reduction, thus protecting cells against oxidative or nitrosative stress. These proteins are found in cyanobacteria, mosses, and microalgae, but have been lost in angiosperms. Here, we used chlorophyll fluorescence and oxygen exchange measurement using [ 18 O]-labeled O 2 and a membrane inlet mass spectrometer to characterize Chlamydomonas reinhardtii flvB insertion mutants devoid of both FlvB and FlvA proteins. We show that Flv proteins are involved in a photo-dependent electron flow to oxygen, which drives most of the photosynthetic electron flow during the induction of photosynthesis. As a consequence, the chlorophyll fluorescence patterns are strongly affected in flvB mutants during a light transient, showing a lower PSII operating yield and a slower nonphotochemical quenching induction. Photoautotrophic growth of flvB mutants was indistinguishable from the wild type under constant light, but severely impaired under fluctuating light due to PSI photo damage. Remarkably, net photosynthesis of flv mutants was higher than in the wild type during the initial hour of a fluctuating light regime, but this advantage vanished under long-term exposure, and turned into PSI photo damage, thus explaining the marked growth retardation observed in these conditions. We conclude that the C. reinhardtii Flv participates in a Mehler-like reduction of O 2 , which drives a large part of the photosynthetic electron flow during a light transient and is thus critical for growth under fluctuating light regimes. © 2017 American Society of Plant Biologists. All Rights Reserved.

  7. Transient Analysis of a Gas-cooled Fast Reactor for Single Control Assembly Withdrawal

    International Nuclear Information System (INIS)

    Choi, Hangbok

    2014-01-01

    The Energy Multiplier Module (EMZ) system response has been evaluated for control assembly withdrawal transients. Currently the EM2 core is equipped with six cylindrical drum-type control assemblies in the reflector zone for excess reactivity control and power maneuvering during the operating core life. This study investigates the system response to the control assembly withdrawal accident with various rotational speeds and reactivity worth to determine feasible control assembly design requirements from the physics viewpoint. The simulations have been conducted for single control assembly withdrawal transients without scram by a gas-cooled reactor plant simulator, which is based on a simplified plant nodal model, including the point reactor kinetics, single channel core thermal-fluid model, and a turbo-machinery performance model. Simulations were conducted for the middle-of- cycle core, when the excess reactivity of the core is the highest. Control assembly withdrawal times were varied from 1 (runaway) to 180 sec and reactivity worth was varied from 100 to 400 pcm. For a single control assembly withdrawal, the simulation has shown that the peak fuel temperature is expected to be ~1820°C when the assembly worth is 200 pcm and the runaway time is 1 sec per 180 degree rotation. The peak temperature could be reduced to ~1780°C if the assembly is rotated out in a moderate speed such as 1 degree/sec. These peak temperatures give a thermal margin of 22 to 24% to the melting point of uranium carbide fuel. The results also indicate that the current design with a single control assembly worth of 314 pcm may need adjustments in the future design. (author)

  8. Direct measurement of fast transients by using boot-strapped waveform averaging

    Science.gov (United States)

    Olsson, Mattias; Edman, Fredrik; Karki, Khadga Jung

    2018-03-01

    An approximation to coherent sampling, also known as boot-strapped waveform averaging, is presented. The method uses digital cavities to determine the condition for coherent sampling. It can be used to increase the effective sampling rate of a repetitive signal and the signal to noise ratio simultaneously. The method is demonstrated by using it to directly measure the fluorescence lifetime from Rhodamine 6G by digitizing the signal from a fast avalanche photodiode. The obtained lifetime of 4.0 ns is in agreement with the known values.

  9. Adaptation and implementation of the TRACE code for transient analysis in designs lead cooled fast reactors

    International Nuclear Information System (INIS)

    Lazaro, A.; Ammirabile, L.; Martorell, S.

    2015-01-01

    Lead-Cooled Fast Reactor (LFR) has been identified as one of promising future reactor concepts in the technology road map of the Generation IVC International Forum (GIF)as well as in the Deployment Strategy of the European Sustainable Nuclear Industrial Initiative (ESNII), both aiming at improved sustainability, enhanced safety, economic competitiveness, and proliferation resistance. This new nuclear reactor concept requires the development of computational tools to be applied in design and safety assessments to confirm improved inherent and passive safety features of this design. One approach to this issue is to modify the current computational codes developed for the simulation of Light Water Reactors towards their applicability for the new designs. This paper reports on the performed modifications of the TRACE system code to make it applicable to LFR safety assessments. The capabilities of the modified code are demonstrated on series of benchmark exercises performed versus other safety analysis codes. (Author)

  10. Lecture background notes on transient sodium boiling and voiding in fast reactors

    International Nuclear Information System (INIS)

    Okrent, D.; Fauske, H.K.

    1972-01-01

    This set of lecture background notes includes the following: (1) Introductory remarks on fast reactor safety, which are intended to provide some perspective on the role played by sodium boiling. (2) A discussion of superheat which reviews the experimental data and nucleation models with emphasis on the pressure-temperature history effect on radius of active cavity sites, including the role played by inert gas. (3) A discussion of the growth and collapse of spherical bubbles. (4) A historical description of the development of computer codes to describe voiding and a detailed description of the analytical formulation of typical models for calculating voiding due to boiling, fission gas release, and molten fuel-coolant interaction. (U.S.)

  11. CYLFUX, Fast Reactor Reactivity Transients Simulation in LWR by 2-D 2 Group Diffusion

    International Nuclear Information System (INIS)

    Schmidt, A.

    1973-01-01

    1 - Nature of physical problem solved: A 2-dimensional calculation of the 2-group, space-dependent neutron diffusion equations is performed in r-z geometry using an arbitrary number of groups of delayed neutron precursors. The program is designed to simulate fast reactivity excursions in light water reactors taking into account Doppler feedback via adiabatic heatup of fuel. Axial motions of control rods may be considered including scram action on option. 2 - Method of solution: The differential equations are solved at each time step by an explicit finite difference method using two time levels. The stationary distributions are obtained by using the same algorithm. 3 - Restrictions on the complexity of the problem: No restriction to the number of space points and delayed neutron energy groups besides the computer size

  12. A numerical thermal-hydraulic model to simulate the fast transients in a supercritical water channel subjected to sharp pressure variations

    NARCIS (Netherlands)

    Dutta, G.; Jiang, J.; Maitri, R.; Zhang, C.

    2016-01-01

    The present work demonstrates the extension of a thermal-hydraulic model, THRUST, with an objective to simulate the fast transient flow dynamics in a supercritical water channel of circular cross section. THRUST is a 1-D model which solves the nonlinearly coupled mass, axial momentum and energy

  13. Transient and chronic neurological complications of fast neutron radiation for adenocarcinoma of the prostate

    International Nuclear Information System (INIS)

    Russell, K.J.; Laramore, G.E.; Wiens, L.W.; Griffeth, J.T.; Koh, W.J.; Griffin, B.R.; Austin-Seymour, M.M.; Griffin, T.W.

    1990-01-01

    The records of 132 patients participating in clinical trials using fast neutron (n = 94), mixed neutron and photon (n = 16), or conventional photon (n = 22) irradiation for primary management of prostatic cancer were retrospectively reviewed to assess treatment-related neurological complications. With a median follow-up of 14 months (range 1 to 101 months), 31/132 patients (26 neutron, 3 mixed beam, 2 photon) have experienced either sciatica beginning during or shortly after treatment, or diminished bladder or bowel continence that developed at a median time of 6.5 months following treatment. Sciatica responded to oral steroids and was usually self-limited, whereas sphincter dysfunction appears to be permanent. Pre-treatment risk factors for complications included a history of hypertension, diabetes, cigarette smoking or peripheral vascular disease, with 81% of affected patients having one or more risk factors compared witn 55% of unaffected patients (p = 0.01). Seven patients have moderate (5) or severe (2) residual problems, all in the cohorts receiving neutrons (6/7) or mixed beam therapy (1/7). (author). 31 refs.; 5 tabs

  14. Transient and chronic neurological complications of fast neutron radiation for adenocarcinoma of the prostate

    Energy Technology Data Exchange (ETDEWEB)

    Russell, K.J.; Laramore, G.E.; Wiens, L.W.; Griffeth, J.T.; Koh, W.J.; Griffin, B.R.; Austin-Seymour, M.M.; Griffin, T.W. (Washington Univ., Seattle, WA (USA). Lab. of Radiation Ecology); Krieger, J.N. (Washington University, Seattle (USA). Department of Urology); Davis, L.W. (Albert Einstein Coll. of Medicine, Bronx, NY (USA))

    1990-07-01

    The records of 132 patients participating in clinical trials using fast neutron (n = 94), mixed neutron and photon (n = 16), or conventional photon (n = 22) irradiation for primary management of prostatic cancer were retrospectively reviewed to assess treatment-related neurological complications. With a median follow-up of 14 months (range 1 to 101 months), 31/132 patients (26 neutron, 3 mixed beam, 2 photon) have experienced either sciatica beginning during or shortly after treatment, or diminished bladder or bowel continence that developed at a median time of 6.5 months following treatment. Sciatica responded to oral steroids and was usually self-limited, whereas sphincter dysfunction appears to be permanent. Pre-treatment risk factors for complications included a history of hypertension, diabetes, cigarette smoking or peripheral vascular disease, with 81% of affected patients having one or more risk factors compared witn 55% of unaffected patients (p = 0.01). Seven patients have moderate (5) or severe (2) residual problems, all in the cohorts receiving neutrons (6/7) or mixed beam therapy (1/7). (author). 31 refs.; 5 tabs.

  15. Effect of coupling currents on the dynamic inductance during fast transient in superconducting magnets

    Directory of Open Access Journals (Sweden)

    V. Marinozzi

    2015-03-01

    Full Text Available We present electromagnetic models aiming to calculate the variation of the inductance in a magnet due to dynamic effects such as the variation of magnetization or the coupling with eddy currents. The models are studied with special regard to the calculation of the inductance in superconducting magnets which are affected by interfilament coupling currents. The developed models have been compared with experimental data coming from tests of prototype Nb_{3}Sn magnets designed for the new generation of accelerators. This work is relevant for the quench protection study of superconducting magnets: quench is an unwanted event, when part of the magnet becomes resistive; in these cases, the current should be discharged as fast as possible, in order to maintain the resistive zone temperature under a safe limit. The magnet inductance is therefore a relevant term for the description of the current discharge, especially for the high-field new generation superconducting magnets for accelerators, and this work shows how to calculate the correct value during rapid current changes, providing a mean for simulations of the reached temperature.

  16. A SEARCH FOR RAPIDLY SPINNING PULSARS AND FAST TRANSIENTS IN UNIDENTIFIED RADIO SOURCES WITH THE NRAO 43 METER TELESCOPE

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, Deborah; Crawford, Fronefield; Gilpin, Claire [Department of Physics and Astronomy, Franklin and Marshall College, P.O. Box 3003, Lancaster, PA 17604 (United States); Langston, Glen [National Radio Astronomy Observatory, P.O. Box 2, Green Bank, WV 24944 (United States)

    2013-04-15

    We have searched 75 unidentified radio sources selected from the NRAO VLA Sky Survey catalog for the presence of rapidly spinning pulsars and short, dispersed radio bursts. The sources are radio bright, have no identifications or optical source coincidences, are more than 5% linearly polarized, and are spatially unresolved in the catalog. If these sources are fast-spinning pulsars (e.g., sub-millisecond pulsars), previous large-scale pulsar surveys may have missed detection due to instrumental and computational limitations, eclipsing effects, or diffractive scintillation. The discovery of a sub-millisecond pulsar would significantly constrain the neutron star equation of state and would have implications for models predicting a rapid slowdown of highly recycled X-ray pulsars to millisecond periods from, e.g., accretion disk decoupling. These same sources were previously searched unsuccessfully for pulsations at 610 MHz with the Lovell Telescope at Jodrell Bank. This new search was conducted at a different epoch with a new 800 MHz backend on the NRAO 43 m Telescope at a center frequency of 1200 MHz. Our search was sensitive to sub-millisecond pulsars in highly accelerated binary systems and to short transient pulses. No periodic or transient signals were detected from any of the target sources. We conclude that diffractive scintillation, dispersive smearing, and binary acceleration are unlikely to have prevented detection of the large majority of the sources if they are pulsars, though we cannot rule out eclipsing, nulling or intermittent emission, or radio interference as possible factors for some non-detections. Other (speculative) possibilities for what these sources might include radio-emitting magnetic cataclysmic variables or older pulsars with aligned magnetic and spin axes.

  17. Craft qualities translated from traditional crafts to smart textile services

    NARCIS (Netherlands)

    Kuusk, K.; Wensveen, S.A.G.; Tomico Plasencia, O.

    2016-01-01

    In this article we suggest craft and craftsmanship as an inspiration to design more sustainable smart textile services. We look into the opportunities that interactive properties and services bring into the textile and garment life cycle. We use traditional crafts as a source of inspiration for the

  18. Crafting digital media

    CERN Document Server

    James, Daniel

    2010-01-01

    Open source software, also known as free software, now offers a creative platform with world-class programs. Just ask the people who have completed high-quality projects or developed popular web 2.0 sites using open source desktop applications. This phenomenon is no longer underground or restricted to techies - there have been more than 61 million downloads of the Audacity audio editor and more than 60 million downloads of the GIMP for Windows photographic tool from SourceForge.net alone. Crafting Digital Media is your foundation course in photographic manipulation, illustration, animation, 3D

  19. A crafting of potentials

    DEFF Research Database (Denmark)

    Kilbourn, Kyle

    In the movement from understanding the past towards creating the future design anthropology, as a discipline, will turn from one with archival qualities to one endowed with potentials for change. One challenge facing design anthropology is how to show relevance for theory generation while also in......-as is complemented by designing for as design anthropologists stage design workshops, span knowledge traditions, and make design moves. Reflecting on my own research process, I trace a few research tools that underline the craft of design anthropology....

  20. Transient dry out in Forsmark 2 during a fast pump runback - course of events, fuel investigations and measures taken

    Energy Technology Data Exchange (ETDEWEB)

    Ramenblad, Eric; Schrire, David [Vattenfall Nuclear Fuel, Jaemtlandsgatan 99, 162 87 Stockholm (Sweden); Schroeder, Bjoern [Forsmarks Kraftgrupp AB, 172 03 Oesthammar (Sweden)

    2009-06-15

    to around 30 deg. C. The fully-recrystallised Zircaloy-2 cladding used in both the ATRIUM-10B and the GE14 fuel hardens rapidly under BWR conditions. The irradiation hardening leads to an increase in the ultimate tensile stress (UTS), the yield stress or elastic limit and the hardness of the material. The hardening is strongly dependent on the fast neutron fluence (usually expressed in n/m{sup 2}, E>1 MeV), and less strongly dependent on the material microstructure (size distribution of the secondary phase particles) and the temperature (where higher temperature during irradiation results in less hardening). The temperature transient leads to a softening (annealing) of the Zircaloy, i.e. a reduction of the yield stress and an increase in ductility. At the low burnup when the transient dryout occurred ({approx}10 MWd/kgU), the negative effect of the reduction in the yield stress outweighs the beneficial effect of the increase in ductility, if the irradiation hardening is taken into account in the mechanical design of the fuel. The resulting temperatures were evaluated using different criteria for fuel reuse proposed by Areva and AESJ. Areva - The limits for fuel reuse consist of two parts: a peak cladding temperature of 800 deg. C for up to 1 second, together with a limit on the cumulative annealing parameter {sigma}A during the entire duration of the event of 1,5.10{sup -20}. AESJ - AESJ (Atomic Energy Society of Japan) has developed criteria for fuel reuse (i.e. continued operation) as well as criteria for fuel integrity (non-failure) without reuse, following a transient dryout (or 'boiling transition') event. The AESJ criteria for fuel reuse consist of a limit on the maximum cladding temperature as well as a limit on the duration. The calculated peak cladding temperature histories for both best estimate and conservative scenarios are within the Areva and AESJ proposed post-dryout criteria for fuel reuse, for both the Atrium 10 and GE14 fuel. Furthermore

  1. Analysis of the ballooning deformation of an internally pressurized thin-wall tube during fast thermal transients

    International Nuclear Information System (INIS)

    Lin, E.I.H.

    1977-01-01

    A large-strain time-dependent thermoplastic analysis has been developed for the ballooning deformation of a thin-wall tube subjected to internal pressure, axial loading, and fast thermal transients. This deformation initiates with the onset of plastic instability in the material, the onset being determined by a plastic-instability criterion for strain-rate sensitive materials. The interaction among the local ballooning geometry, the state of stress, and the plastic flow process was considered, and integration of the flow equations yields the local curvature and the states of stress and strain in the vicinity of the maximum ballooning site. The effects of axial constraint and heating rate were also discussed. The analysis was applied to a LWR Zircaloy cladding subjected to a constant heating rate and a range of internal pressures. The results agree very well with experimental strain-time data obtained from tube-burst tests. In most cases, the time of rupture was accurately predicted despite the lack of complete material-property data

  2. A 3 A sink/source current fast transient response low-dropout G{sub m} driven linear regulator

    Energy Technology Data Exchange (ETDEWEB)

    Chu Xiuqin; Li Qingwei; Lai Xinquan; Yuan Bing [Institute of Electronic CAD, Xidian University, Xi' an 710071 (China); Li Yanming [School of Electronic and Control Engineering, Chang' an University, Xi' an 710064 (China); Zhao Yongrui, E-mail: liqw309@163.com, E-mail: xqchu@mail.xidian.edu.cn [Key Laboratory of High-Speed Circuit Design and EMC, Ministry of Education, Xidian University, Xi' an 710071 (China)

    2011-06-15

    A 3 A sink/source G{sub m}-driven CMOS low-dropout regulator (LDO), specially designed for low input voltage and low cost, is presented by utilizing the structure of a current mirror G{sub m} (transconductance) driving technique, which provides high stability as well as a fast load transient response. The proposed LDO was fabricated by a 0.5 {mu}m standard CMOS process, and the die size is as small as 1.0 mm{sup 2}. The proposed LDO dissipates 220 {mu}A of quiescent current in no-load conditions and is able to deliver up to 3 A of load current. The measured results show that the output voltage can be resumed within 2 {mu}s with a less than 1 mV overshoot and undershoot in the output current step from -1.8 to 1.8 A with a 0.1 {mu}s rising and falling time at three 10 {mu}F ceramic capacitors. (semiconductor integrated circuits)

  3. A 3 A sink/source current fast transient response low-dropout Gm driven linear regulator

    International Nuclear Information System (INIS)

    Chu Xiuqin; Li Qingwei; Lai Xinquan; Yuan Bing; Li Yanming; Zhao Yongrui

    2011-01-01

    A 3 A sink/source G m -driven CMOS low-dropout regulator (LDO), specially designed for low input voltage and low cost, is presented by utilizing the structure of a current mirror G m (transconductance) driving technique, which provides high stability as well as a fast load transient response. The proposed LDO was fabricated by a 0.5 μm standard CMOS process, and the die size is as small as 1.0 mm 2 . The proposed LDO dissipates 220 μA of quiescent current in no-load conditions and is able to deliver up to 3 A of load current. The measured results show that the output voltage can be resumed within 2 μs with a less than 1 mV overshoot and undershoot in the output current step from -1.8 to 1.8 A with a 0.1 μs rising and falling time at three 10 μF ceramic capacitors. (semiconductor integrated circuits)

  4. Fast calcium transients translate the distribution and conduction of neural activity in different regions of a single sensory neuron.

    Science.gov (United States)

    Purali, Nuhan

    2017-09-01

    In the present study, cytosolic calcium concentration changes were recorded in response to various forms of excitations, using the fluorescent calcium indicator dye OG-BAPTA1 together with the current or voltage clamp methods in stretch receptor neurons of crayfish. A single action potential evoked a rise in the resting calcium level in the axon and axonal hillock, whereas an impulse train or a large saturating current injection would be required to evoke an equivalent response in the dendrite region. Under voltage clamp conditions, amplitude differences between axon and dendrite responses vanished completely. The fast activation time and the modulation of the response by extracellular calcium concentration changes indicated that the evoked calcium transients might be mediated by calcium entry into the cytosol through a voltage-gated calcium channel. The decay of the responses was slow and sensitive to extracellular sodium and calcium concentrations as well as exposure to 1-10 mM NiCl 2 and 10-500 µM lanthanum. Thus, a sodium calcium exchanger and a calcium ATPase might be responsible for calcium extrusion from the cytosol. Present results indicate that the calcium indicator OG-BAPTA1 might be an efficient but indirect way of monitoring regional membrane potential differences in a single neuron.

  5. Self-crafting vegetable snacks

    NARCIS (Netherlands)

    Raghoebar, Sanne; Kleef, van Ellen; Vet, de Emely

    2017-01-01

    Purpose: The purpose of this paper is to test whether the IKEA-effect (Norton et al., 2012) – better liking for self-crafted products than for identical products crafted by others – can be exploited to increase liking and consumption of vegetable snacks in children. Design/methodology/approach: A

  6. Fast transient digitizer

    International Nuclear Information System (INIS)

    Villa, F.

    1982-01-01

    Method and apparatus for sequentially scanning a plurality of target elements with an electron scanning beam modulated in accordance with variations in a high-frequency analog signal to provide discrete analog signal samples representative of successive portions of the analog signal; coupling the discrete analog signal samples from each of the target elements to a different one of a plurality of high speed storage devices; converting the discrete analog signal samples to equivalent digital signals; and storing the digital signals in a digital memory unit for subsequent measurement or display

  7. IGR J17544-2619 IN DEPTH WITH SUZAKU: DIRECT EVIDENCE FOR CLUMPY WINDS IN A SUPERGIANT FAST X-RAY TRANSIENT

    International Nuclear Information System (INIS)

    Rampy, Rachel A.; Smith, David M.; Negueruela, Ignacio

    2009-01-01

    We present direct evidence for dense clumps of matter in the companion wind in a Supergiant Fast X-ray Transient (SFXT) binary. This is seen as a brief period of enhanced absorption during one of the bright, fast flares that distinguish these systems. The object under study was IGR J17544-2619, and a total of 236 ks of data were accumulated with the Japanese satellite Suzaku. The activity in this period spans a dynamic range of almost 10 4 in luminosity and gives a detailed look at SFXT behavior.

  8. 46 CFR 199.201 - Survival craft.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Survival craft. 199.201 Section 199.201 Shipping COAST... craft. (a) Each survival craft must be approved and equipped as follows: (1) Each lifeboat must be... addition to the survival craft required in paragraph (b)(1) of this section, additional liferafts must be...

  9. Control-rod, pressure and flow-induced accident and transient analysis of a direct-cycle, supercritical-pressure, light-water-cooled fast breeder reactor

    International Nuclear Information System (INIS)

    Kitoh, Kazuaki; Koshizuka, Seiichi; Oka, Yoshiaki

    1996-01-01

    The features of the direct-cycle, supercritical-pressure, light-water-cooled fast breeder reactor (SCFBR) are high thermal efficiency and simple reactor system. The safety principle is basically the same as that of an LWR since it is a water-cooled reactor. Maintaining the core flow is the basic safety requirement of the reactor, since its coolant system is the one through type. The transient behaviors at control rod, pressure and flow-induced abnormalities are analyzed and presented in this paper. The results of flow-induced transients of SCFBR were reported at ICONE-3, though pressure change was neglected. The change of fuel temperature distribution is also considered for the analysis of the rapid reactivity-induced transients such as control rod withdrawal. Total loss of flow and pump seizure are analyzed as the accidents. Loss of load, control rod withdrawal from the normal operation, loss of feedwater heating, inadvertent start of an auxiliary feedwater pump, partial loss of coolant flow and loss of external power are analyzed as the transients. The behavior of the flow-induced transients is not so much different from the analyses assuming constant pressure. Fly wheels should be equipped with the feedwater pumps to prolong the coast-down time more than 10s and to cope with the total loss of flow accident. The coolant density coefficient of the SCFBR is less than one tenth of a BWR in which the recirculation flow is used for the power control. The over pressurization transients at the loss of load is not so severe as that of a BWR. The power reaches 120%. The minimum deterioration heat flux ratio (MDHFR) and the maximum pressure are sufficiently lower than the criteria; MDHFR above 1.0 and pressure ratio below 1.10 of 27.5 MPa, maximum pressure for operation. Among the reactivity abnormalities, the control rod withdrawal transient from the normal operation is analyzed

  10. To craft or not to craft : The relationships between regulatory focus, job crafting and work outcomes

    NARCIS (Netherlands)

    Brenninkmeijer, Veerle; Hekkert-Koning, Marleen

    2015-01-01

    Purpose – The purpose of this paper is to examine relationships between regulatory focus, job crafting, work engagement and perceived employability. Regulatory focus theory distinguishes between promotion-focused individuals, who strive for growth and development, and preventionfocussed individuals,

  11. 32 CFR 700.406 - Naval Vessel Register, classification of naval craft, and status of ships and service craft.

    Science.gov (United States)

    2010-07-01

    ... craft, and status of ships and service craft. 700.406 Section 700.406 National Defense Department of... Register, classification of naval craft, and status of ships and service craft. (a) The Chief of Naval... craft and the designation of status for each ship and service craft. (b) Commissioned vessels and craft...

  12. Tucurui`s 500 kV S F{sub 6} gas-insulated substation modeling for fast transients - field tests comparison

    Energy Technology Data Exchange (ETDEWEB)

    Lima Filho, Joao Ferreira de; Pazo Blanco, Flavio A.F.; D` Ajuz, Ary; Nascimento, Lidio F.A. [ELETRONORTE, Brasilia, DF (Brazil)

    1994-12-31

    Many problems in insulation, devices and equipment have been resulted from switching operations in the 500 kV Gas-Insulated Substation (GIS) of Tucurui power plant. Disconnector closing or opening action can subject the GIS components to great stresses from excessive voltages at high frequencies caused by successive reflections of travelling waves at discontinuities (1,2,3). Field tests were carried out in September 18-23, 1991 to verify the actual GIS stresses at Tucurui. From these results simulations on the Alternative Transients Program (ATP) were performed in order to check the substation modeling. This paper presents and discusses the Tucurui GIS modeling for switching fast transients and its field test validation. (author) 8 refs., 6 figs.

  13. Craft vs. industrial: Habits, attitudes and motivations towards beer consumption in Mexico.

    Science.gov (United States)

    Gómez-Corona, Carlos; Escalona-Buendía, Héctor B; García, Mauricio; Chollet, Sylvie; Valentin, Dominique

    2016-01-01

    Food choices tend to be stable over time; they do not change fast, since consumers tend to act like creatures of habits. However, food habits can evolve, like currently the craft beer category. A change of habits involves a change of perception towards a product. Therefore, what is changing in the perception of beer? Two studies were conducted to address this question. First study was preliminary and aimed at exploring beer consumption habits in Mexico and a better understanding of craft beer representation among beer users. A questionnaire was administrated to 207 consumers in Mexico City during a beer festival. Results showed that respondents could be classified in: industrial beer (41.1%), occasional industrial (24.1%), and craft beer (34.8%) consumers. Craft cluster included mostly 25-35 years old men with high-income level. Among the craft beers cited by respondents from this cluster some are industrial, suggesting that the concept of craft beer might not be well defined, or defined in ideological terms. The second and main study was conducted using consumer ethnographies to understand the motivations and benefits of craft beer consumption. Opposite to industrial, craft beer emerges as an experience-based and symbolic product rather than a utilitarian one. The main motivation for drinking craft beer seems to be the quest of authenticity. Respondents' motivations to drink craft beer are generated by three important factors: desire for more knowledge, new taste experiences, and move away from the mainstream beer consumption. Craft consumers do not drink the product for its functional attributes, they consume it for what it means and as a consequence they build an identity, perceived as more authentic and unique, in comparison to the mainstream industrial beer consumption in Mexico. Copyright © 2015 Elsevier Ltd. All rights reserved.

  14. A fast reactor transient analysis methodology for PCs: Volume 3, LTC program manual of the QuickBASIC code

    International Nuclear Information System (INIS)

    Ott, K.O.; Chung, L.

    1992-06-01

    This manual augments the detailed manual of the GW-BASIC version of the LTC code for an application in QuickBASIC. As most of the GW-BASIC coding of this program for ''LMR Transient Calculations'' is compatible with QuickBASIC, this manual pertains primarily to the required changes, such as the handling of input and output. The considerable reduction in computation time achieved by this conversion is demonstrated for two sample problems, using a variety of hardware and execution options. The revised code is listed. Although the severe storage limitations of GW-BASIC no longer apply, the LOF transient path has not been completed in this QuickBASIC code. Its advantages are thus primarily in the much faster running time for TOP and LOHS transients. For the fastest PC hardware (486) and execution option the computation time is reduced by a factor of 124 compared to GW-BASIC on a 386/20

  15. Fungal decay of traditional fishing craft

    Digital Repository Service at National Institute of Oceanography (India)

    Gupta, R.

    The artisanal fishermen land major portion of fish caught in India, employing traditional fishing craft and methods. These craft are built of indigenous wood and undergo rapid biodeterioration causing great economic loss. Soft-rot fungi...

  16. When Does Job Crafting Generalize To Home Crafting

    DEFF Research Database (Denmark)

    Demerouti, Evangelina; De Gieter, Sara; Haun, Verena

    Purpose: Job crafting represents attempts to expand (seeking resources or challenges) or reduce (reducing demands) the scope of the job such that it fits better to one’s preferences. The spillover hypothesis suggests that individuals generalize behaviors at work also to the non-work domain...

  17. Learning craft skills. Exploring preschoolers' craft making process

    Directory of Open Access Journals (Sweden)

    Virpi Yliverronen

    2016-06-01

    Full Text Available The aim of this study was to explore a preschooler craft-making process in which 18 preschool novices cut pieces for fabric bags and designed and printed patterns to decorate the bags. Through the task, children were familiarised with a small-scale holistic craft process. The intention was to determine how preschoolers perceived, verbalised and interpreted the craft-making process and how children used bodily expressions when explaining a learned craft skill. The present study relies on the videographic method: two preschool groups’ stamp printing activities were recorded, and each child was interviewed individually. Children’s embodied expressions were particularly in focus in video analysis. The results reveal that all the children were able to sufficiently explain the making phase, however, some children compensated for missing words using bodily and facial expressions and gestures when talking about making. The results showed that children worked logically, and the skill learning phases of perceiving, making, and interpretation were revealed from their learning.

  18. FAST

    DEFF Research Database (Denmark)

    Zuidmeer-Jongejan, Laurian; Fernandez-Rivas, Montserrat; Poulsen, Lars K.

    2012-01-01

    ABSTRACT: The FAST project (Food Allergy Specific Immunotherapy) aims at the development of safe and effective treatment of food allergies, targeting prevalent, persistent and severe allergy to fish and peach. Classical allergen-specific immunotherapy (SIT), using subcutaneous injections with aqu...

  19. 46 CFR 199.261 - Survival craft.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Survival craft. 199.261 Section 199.261 Shipping COAST... SYSTEMS FOR CERTAIN INSPECTED VESSELS Additional Requirements for Cargo Vessels § 199.261 Survival craft. (a) Each survival craft must be approved and equipped as follows: (1) Each lifeboat must be a totally...

  20. 46 CFR 28.120 - Survival craft.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Survival craft. 28.120 Section 28.120 Shipping COAST... VESSELS Requirements for All Vessels § 28.120 Survival craft. (a) Except as provided in paragraphs (b) through (h) of this section and 28.305, each vessel must carry the survival craft specified in Table 28...

  1. 46 CFR 133.105 - Survival craft.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Survival craft. 133.105 Section 133.105 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OFFSHORE SUPPLY VESSELS LIFESAVING SYSTEMS Requirements for All OSVs § 133.105 Survival craft. (a) Each survival craft must be approved and equipped as...

  2. Secondary School Design: Workshop Crafts.

    Science.gov (United States)

    Department of Education and Science, London (England).

    Design features are described for school shop facilities. Some general requirements common to most workshops are discussed; and specific design information is provided for general woodwork, general metalwork, and combined wood and metalwork facilities. The grouping of the workshop crafts and their relation to other parts of the school are also…

  3. Scanning transient current study of the I-V stabilization phenomena in silicon detectors irradiated by fast neutrons

    International Nuclear Information System (INIS)

    Eremin, V.; Verbitskaya, E.; Sidorov, A.; Fretwurst, E.; Lindstrom, G.

    1996-03-01

    Investigation of the I-V stabilization phenomena in neutron irradiated silicon detectors has been carried out using scanning transient current technique (STCT) on non-irradiated PP + -p-n + detectors. The PP + -p-n + detectors were used to simulate the PP + -n-n + detectors irradiated beyond the space charge sign inversion (SCSI). Two mechanisms partially responsible for the I- V stabilization have been identified

  4. Intermittent fasting during Ramadan causes a transient increase in total, LDL, and HDL cholesterols and hs-CRP in ethnic obese adolescents.

    Science.gov (United States)

    Radhakishun, Nalini; Blokhuis, Charlotte; van Vliet, Mariska; von Rosenstiel, Ines; Weijer, Olivier; Heymans, Martijn; Beijnen, Jos; Brandjes, Dees; Diamant, Michaela

    2014-08-01

    The radical change of lifestyle during Ramadan fast has shown to affect cardiometabolic risk variables in adults. In youth, however, no studies are available. We aimed to evaluate the effect of Ramadan fast on Body Mass Index (BMI) and the cardiometabolic profile of obese adolescents. A prospective cohort study was conducted. We measured weight, height, body composition, blood pressure, heart rate, glucose, insulin, total cholesterol, low-density lipoprotein (LDL) cholesterol and high-density lipoprotein (HDL) cholesterol, triglycerides, and high sensitivity C-reactive protein (hs-CRP) levels before, during the last week of and at 6 weeks after Ramadan. Twenty-five obese adolescents were included. BMI and glucose metabolism did not change after Ramadan or at 6 week after cessation of Ramadan. At the end of Ramadan, a significant decrease in body fat percentage was observed, while significant increases in heart rate, total cholesterol, LDL cholesterol, HDL cholesterol, and hs-CRP were found (all P < 0.05). Six weeks after Ramadan, all parameters returned to baseline levels. In this sample of 25 ethnic obese adolescents transient cardiometabolic changes were observed during Ramadan fasting. Since most of these changes were reversible within 6 weeks, there seems no harm or benefit for obese adolescents to participate in Ramadan.

  5. Trade-off Analysis of Virtual Inertia and Fast Primary Frequency Control During Frequency Transients in a Converter Dominated Network

    DEFF Research Database (Denmark)

    Rezkalla, Michel M.N.; Marinelli, Mattia; Pertl, Michael

    2016-01-01

    Traditionally the electricity generation is based on rotating synchronous machines which provide inertia to the power system.The increasing share of converter connected energy sources reduces the available rotational inertia in the power system leading to faster frequency dynamics, which may cause...... more critical frequency excursions. Both, virtual inertia and fast primary control could serve as a solution to improvefrequency stability, however, their respective impacts on the system have different consequences, so that the trade-off is not straightforward. This study presents a comparative...... analysis of virtual inertiaand a fast primary control algorithms with respect to rate of change of frequency (ROCOF), frequency nadir and steady state value considering the effect of the dead time which is carried out by a sensitivity analysis. The investigation shows that the virtual inertia controller...

  6. Analysis of resonant fast ion distributions during combined ICRF and NBI heating with transients using neutron emission spectroscopy

    Science.gov (United States)

    Hellesen, C.; Mantsinen, M.; Conroy, S.; Ericsson, G.; Eriksson, J.; Kiptily, V. G.; Nabais, F.; Contributors, JET

    2018-05-01

    ICRF heating at the fundamental cyclotron frequency of a hydrogen minority ion species also gives rise to a partial power absorption by deuterium ions at their second harmonic resonance. This paper studies the deuterium distributions resulting from such 2nd harmonic heating at JET using neutron emission spectroscopy data from the time of flight spectrometer TOFOR. The fast deuterium distributions are obtained over the energy range 100 keV to 2 MeV. Specifically, we study how the fast deuterium distributions vary as ICRF heating is used alone as well as in combination with NBI heating. When comparing the different heating scenarios, we observed both a difference in the shapes of the distributions as well as in their absolute level. The differences are most pronounced below 0.5 MeV. Comparisons are made with corresponding distributions calculated with the code PION. We find a good agreement between the measured distributions and those calculated with PION, both in terms of their shapes as well as their amplitudes. However, we also identified a period with signs of an inverted fast ion distribution, which showed large disagreements between the modeled and measured results. Resonant interactions with tornado modes, i.e. core localized toroidal alfven eigenmodes (TAEs), are put forward as a possible explanation for the inverted distribution.

  7. NuSTAR J163433-4738.7: A Fast X-ray Transient in the Galactic Plane

    DEFF Research Database (Denmark)

    Tomsick, John A.; Gotthelf, Eric V.; Rahoui, Farid

    2014-01-01

    During hard X-ray observations of the Norma spiral arm region by the Nuclear Spectroscopic Telescope Array (NuSTAR) in 2013 February, a new transient source, NuSTAR J163433-4738.7, was detected at a significance level of 8σ in the 3-10 keV bandpass. The source is consistent with having a constant......T = 1.2 ± 0.3 keV, or a Bremsstrahlung model with keV. The reduced-χ2 values for the three models are not significantly different, ranging from 1.23 to 1.44 for 8 degrees of freedom. The spectrum is strongly absorbed with cm-2, cm-2, and cm-2, for the power-law, blackbody, and Bremsstrahlung models...

  8. Further insights into blood pressure induced premature beats: Transient depolarizations are associated with fast myocardial deformation upon pressure decline.

    Science.gov (United States)

    Haemers, Peter; Sutherland, George; Cikes, Maja; Jakus, Nina; Holemans, Patricia; Sipido, Karin R; Willems, Rik; Claus, Piet

    2015-11-01

    An acute increase in blood pressure is associated with the occurrence of premature ventricular complexes (PVCs). We aimed to study the timing of these PVCs with respect to afterload-induced changes in myocardial deformation in a controlled, preclinically relevant, novel closed-chest pig model. An acute left ventricular (LV) afterload challenge was induced by partial balloon inflation in the descending aorta, lasting 5-10 heartbeats (8 pigs; 396 inflations). Balloon inflation enhanced the reflected wave (augmentation index 30% ± 8% vs 59% ± 6%; P blood pressure by 35% ± 4%. This challenge resulted in a more abrupt LV pressure decline, which was delayed beyond ventricular repolarization (rate of pressure decline 0.16 ± 0.01 mm Hg/s vs 0.27 ± 0.04 mm Hg/ms; P pressure 1 ± 12 ms vs 36 ± 9 ms; P = .008), during which the velocity of myocardial shortening at the basal septum increased abruptly (ie, postsystolic shortening) (peak strain rate -0.6 ± 0.5 s(-1) vs -2.5 ± 0.8 s(-1); P pressure decline, with increased postsystolic shortening, and not at peak pressure, that PVCs occur (22% of inflations). These PVCs preferentially occurred at the basal and apical segments. In the same regions, monophasic action potentials demonstrated the appearance of delayed afterdepolarization-like transient depolarizations as origin of PVCs. An acute blood pressure increase results in a more abrupt LV pressure decline, which is delayed after ventricular repolarization. This has a profound effect on myocardial mechanics with enhanced postsystolic shortening. Coincidence with induced transient depolarizations and PVCs provides support for the mechanoelectrical origin of pressure-induced premature beats. Copyright © 2015 Heart Rhythm Society. Published by Elsevier Inc. All rights reserved.

  9. Impact of the Voltage Transients after a Fast Power Abort on the Quench Detection System in the LHC Main Dipole Chain

    CERN Document Server

    Ravaioli, E; Formenti, F; Montabonnet, V; Pojer, M; Schmidt, R; Siemko, A; Solfaroli Camillocci, A; Steckert, J; Thiesen, H; Verweij, A

    2012-01-01

    A Fast Power Abort in the LHC superconducting main dipole circuit consists in the switch-off of the power converter and the opening of the two energy-extraction switches. Each energy-extraction unit is composed of redundant electromechanical breakers, which are opened to force the current through an extraction resistor. When a switch is opened arcing occurs in the switch and a voltage of up to 1 kV builds up across the extraction resistor with a typical ramp rate of about 80 kV/s. The subsequent voltage transient propagates through the chain of 154 dipoles and superposes on the voltage waves caused by the switch-off of the power converter. The resulting effect caused intermittent triggering of the quench protection systems along with heater firings in the magnets when the transient occurred during a ramp of the current. A delay between power converter switch-off and opening of the energy-extraction switches was introduced to prevent this effect. Furthermore, the output filters of the power converters were mod...

  10. Experimental study of the attenuation waves oriented to transients caused by the sodium-water explosive reaction in fast reactors

    International Nuclear Information System (INIS)

    Pedroso, L.J.

    1990-01-01

    One of the problems related to fluid-structure interaction that can compromise the structural integrity of components of a fast reactor is the explosion caused by the sodium-water reaction, in the case of a flood at the level of the thermic exchange wall at the steam generator. In this paper we have considered the aspects of the pressure-waves damping caused by the reaction, when these waves transverse certain perforated structures. In order to solve this problem, we also adopted a parametric experimental approach, using a scale model (RIO test rig). (author)

  11. 46 CFR 117.200 - Survival craft-general.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Survival craft-general. 117.200 Section 117.200 Shipping... Number and Type of Survival Craft § 117.200 Survival craft—general. (a) Each survival craft required on a... craft they replace. (c) A summary of survival craft requirements is provided in Table 117.200(c). Table...

  12. NuSTAR J163433-4738.7: A fast X-ray transient in the galactic plane

    International Nuclear Information System (INIS)

    Tomsick, John A.; Bodaghee, Arash; Boggs, Steven E.; Craig, William W.; Fornasini, Francesca M.; Krivonos, Roman; Gotthelf, Eric V.; Hailey, Charles J.; Rahoui, Farid; Assef, Roberto J.; Bauer, Franz E.; Christensen, Finn E.; Grindlay, Jonathan; Harrison, Fiona A.; Natalucci, Lorenzo; Stern, Daniel; Zhang, William W.

    2014-01-01

    During hard X-ray observations of the Norma spiral arm region by the Nuclear Spectroscopic Telescope Array (NuSTAR) in 2013 February, a new transient source, NuSTAR J163433-4738.7, was detected at a significance level of 8σ in the 3-10 keV bandpass. The source is consistent with having a constant NuSTAR count rate over a period of 40 ks and is also detected simultaneously by Swift at lower significance. The source is not significantly detected by NuSTAR, Swift, or Chandra in the days before or weeks after the discovery of the transient, indicating that the strong X-ray activity lasted between ∼0.5 and 1.5 days. Near-infrared imaging observations were carried out before and after the X-ray activity, but we are not able to identify the counterpart. The combined NuSTAR and Swift energy spectrum is consistent with a power law with a photon index of Γ=4.1 −1.0 +1.5 (90% confidence errors), a blackbody with kT = 1.2 ± 0.3 keV, or a Bremsstrahlung model with kT=3.0 −1.2 +2.1 keV. The reduced-χ 2 values for the three models are not significantly different, ranging from 1.23 to 1.44 for 8 degrees of freedom. The spectrum is strongly absorbed with N H =(2.8 −1.4 +2.3 )×10 23 cm –2 , (9 −7 +15 )×10 22 cm –2 , and (1.7 −0.9 +1.7 )×10 23 cm –2 , for the power-law, blackbody, and Bremsstrahlung models, respectively. Although the high column density could be due to material local to the source, it is consistent with absorption from interstellar material along the line of sight at a distance of 11 kpc, which would indicate an X-ray luminosity >10 34 erg s –1 . Although we do not reach a definitive determination of the nature of NuSTAR J163433-4738.7, we suggest that it may be an unusually bright active binary or a magnetar.

  13. NuSTAR J163433-4738.7: A fast X-ray transient in the galactic plane

    Energy Technology Data Exchange (ETDEWEB)

    Tomsick, John A.; Bodaghee, Arash; Boggs, Steven E.; Craig, William W.; Fornasini, Francesca M.; Krivonos, Roman [Space Sciences Laboratory, 7 Gauss Way, University of California, Berkeley, CA 94720-7450 (United States); Gotthelf, Eric V.; Hailey, Charles J. [Columbia Astrophysics Laboratory, Columbia University, New York, NY 10027 (United States); Rahoui, Farid [European Southern Observatory, Karl Schwarzschild-Strasse 2, D-85748 Garching bei München (Germany); Assef, Roberto J. [Núcleo de Astronomía de la Facultad de Ingeniería, Universidad Diego Portales, Av. Ejército 441, Santiago (Chile); Bauer, Franz E. [Instituto de Astrofísica, Facultad de Física, Pontifica Universidad Católica de Chile, 306, Santiago 22 (Chile); Christensen, Finn E. [DTU Space, National Space Institute, Technical University of Denmark, Elektrovej 327, DK-2800 Lyngby (Denmark); Grindlay, Jonathan [Harvard-Smithsonian Center for Astrophysics, Cambridge, MA 02138 (United States); Harrison, Fiona A. [Cahill Center for Astronomy and Astrophysics, California Institute of Technology, Pasadena, CA 91125 (United States); Natalucci, Lorenzo [Istituto Nazionale di Astrofisica, INAF-IAPS, via del Fosso del Cavaliere, I-00133 Roma (Italy); Stern, Daniel [Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA 91109 (United States); Zhang, William W., E-mail: jtomsick@ssl.berkeley.edu [NASA Goddard Space Flight Center, Greenbelt, MD 20771 (United States)

    2014-04-10

    During hard X-ray observations of the Norma spiral arm region by the Nuclear Spectroscopic Telescope Array (NuSTAR) in 2013 February, a new transient source, NuSTAR J163433-4738.7, was detected at a significance level of 8σ in the 3-10 keV bandpass. The source is consistent with having a constant NuSTAR count rate over a period of 40 ks and is also detected simultaneously by Swift at lower significance. The source is not significantly detected by NuSTAR, Swift, or Chandra in the days before or weeks after the discovery of the transient, indicating that the strong X-ray activity lasted between ∼0.5 and 1.5 days. Near-infrared imaging observations were carried out before and after the X-ray activity, but we are not able to identify the counterpart. The combined NuSTAR and Swift energy spectrum is consistent with a power law with a photon index of Γ=4.1{sub −1.0}{sup +1.5} (90% confidence errors), a blackbody with kT = 1.2 ± 0.3 keV, or a Bremsstrahlung model with kT=3.0{sub −1.2}{sup +2.1} keV. The reduced-χ{sup 2} values for the three models are not significantly different, ranging from 1.23 to 1.44 for 8 degrees of freedom. The spectrum is strongly absorbed with N{sub H}=(2.8{sub −1.4}{sup +2.3})×10{sup 23} cm{sup –2}, (9{sub −7}{sup +15})×10{sup 22} cm{sup –2}, and (1.7{sub −0.9}{sup +1.7})×10{sup 23} cm{sup –2}, for the power-law, blackbody, and Bremsstrahlung models, respectively. Although the high column density could be due to material local to the source, it is consistent with absorption from interstellar material along the line of sight at a distance of 11 kpc, which would indicate an X-ray luminosity >10{sup 34} erg s{sup –1}. Although we do not reach a definitive determination of the nature of NuSTAR J163433-4738.7, we suggest that it may be an unusually bright active binary or a magnetar.

  14. NuSTAR J163433-4738.7: A Fast X-Ray Transient in the Galactic Plane

    Science.gov (United States)

    Tomsick, John A.; Gotthelf, Eric V.; Rahoui, Farid; Assef, Roberto J.; Bauer, Franz E.; Bodaghee, Arash; Boggs, Steven E.; Christensen, Finn E.; Craig, William W.; Fornasini, Francesca M.; hide

    2014-01-01

    During hard X-ray observations of the Norma spiral arm region by the Nuclear Spectroscopic Telescope Array (NuSTAR) in 2013 February, a new transient source, NuSTAR J163433-4738.7, was detected at a significance level of 8sigma in the 3-10 keV bandpass. The source is consistent with having a constant NuSTAR count rate over a period of 40 ks and is also detected simultaneously by Swift at lower significance. The source is not significantly detected by NuSTAR, Swift, or Chandra in the days before or weeks after the discovery of the transient, indicating that the strong X-ray activity lasted between approx. 0.5 and 1.5 days. Near-infrared imaging observations were carried out before and after the X-ray activity, but we are not able to identify the counterpart. The combined NuSTAR and Swift energy spectrum is consistent with a power law with a photon index of Gamma = 4.1(+1.5/-1.0) (90% confidence errors), a blackbody with kT = 1.2+/-0.3 keV, or a Bremsstrahlung model with kT = 3.0(+2.1/-1.2) keV. The reduced-?2 values for the three models are not significantly different, ranging from 1.23 to 1.44 for 8 degrees of freedom. The spectrum is strongly absorbed with NH = (2.8(+2.3/-1.4) × 10(exp23) cm(exp-2), (9(+15 /-7) ) × 10(exp22) cm(exp-2), and (1.7(+1.7/-0.9)) × 10(exp23) cm(exp-2), for the power-law, blackbody, and Bremsstrahlung models, respectively. Although the high column density could be due to material local to the source, it is consistent with absorption from interstellar material along the line of sight at a distance of 11 kpc, which would indicate an X-ray luminosity greater than 10(exp34) erg s(exp-1). Although we do not reach a definitive determination of the nature of NuSTAR J163433-4738.7, we suggest that it may be an unusually bright active binary or a magnetar.

  15. Development of core hot spot evaluation method for decay heat removal by natural circulation under transient conditions in sodium-cooled fast reactor

    International Nuclear Information System (INIS)

    Ohshima, Hiroyuki; Doda, Norihiro; Kamide, Hideki; Watanabe, Osamu; Ohkubo, Yoshiyuki

    2010-01-01

    Toward the commercialization of fast reactors, a design study of Japan Sodium-cooled Fast Reactor (JSFR) is being performed. In this design study, the adoption of decay heat removal system operated by fully natural circulation is being examined from viewpoints of economic competitiveness and passive safety. This paper describes a new evaluation method of core hot spot under transient conditions from forced to natural circulation operations that is necessary for confirming feasibility of the fully natural circulation decay heat removal system. The new method consists of three analysis steps in order to include effects of thermal hydraulic phenomena particular to the natural circulation decay heat removal, e.g., flow redistribution in fuel assemblies caused by buoyancy force, and therefore it enables more rational hot spot evaluation rather than conventional ones. This method was applied to a hot spot evaluation of loss-of-external-power event and the result was compared with those by conventional 1D and detailed 3D simulations. It was confirmed that the proposed method can estimate the hot spot with reasonable degree of conservativeness. (author)

  16. Single- and two-phase flow modeling for coupled neutronics / thermal-hydraulics transient analysis of advanced sodium-cooled fast reactors

    International Nuclear Information System (INIS)

    Chenu, A.

    2011-10-01

    Nuclear power is nowadays in the front rank as regards helping to meet the growing worldwide energy demand while avoiding an excessive increase in greenhouse gas emissions. However, the operating nuclear power plants are mainly thermal-neutron reactors and, as such, can not be maintained on the basis of the currently identified uranium resources beyond one century at the present consumption rate. Sustainability of nuclear power thus involves closure of the fuel cycle through breeding. With a uranium-based fuel, breeding can only be achieved using a fast-neutron reactor. Sodium-cooled fast reactor (SFR) technology benefits from 400 reactor-years of accumulated experience and is thus a prime candidate for the implementation of so-called Generation-IV nuclear energy systems. In this context, the safety demonstration of SFRs remains a major Research and Development related issue. The current research aims at the development of a computational tool for the in-depth understanding of SFR core behaviour during accidental transients, particularly those including boiling of the coolant. An accurate modelling of the core physics during such transients requires the coupling between 3D neutron kinetics and thermal-hydraulics in the core, to account for the strong interactions between the two-phase coolant flow and power variations caused by the sodium void effect. The present study is specifically focused upon models for the representation of sodium two-phase flow. The extension of the thermal-hydraulics TRACE code, previously limited to the simulation of single-phase sodium flow, has been carried out through the implementation of equations-of-state and closure relations specific to sodium. The different correlations have then been implemented as options. From the validation study carried out, it has been possible to recommend a set of models which provide satisfactory results, while considering annular flow as the dominant regime up to dryout and a smooth breakdown of the

  17. Supporting Craft Sense in Early Education

    Directory of Open Access Journals (Sweden)

    Kalle Virta

    2013-10-01

    Full Text Available The research task was to describe and construct theoretical background for Craft Sense in early education. Craft Sense represents a learner’s skill for obtaining Sloyd (Craft, Design & Technology related knowledge, skills and understanding. The development of Craft Sense is based on producing artefacts and evaluating the production process. In this research, the concept of Craft Sense is based on the integration of Sloyd and meta-cognitive regulation of learning activities. Based on theoretical information, an empirical research question was formulated: “What kind of Craft Sense do children have in early education Sloyd?” The method of study was assessing picture supported learning on a Sloyd course for young children. The data was analyzed by qualitative content analysis and Child Behaviour Rating Scale (CBRS. Findings indicate that the development of children’s Craft Sense can be supported with pictures. Furthermore, the CBRS can be used to evaluate and understand children’s Craft Sense. Keywords: Craft Sense, Sloyd, Sloyd Education, Meta-cognition

  18. Research 2009-2011 - Digital Crafting

    DEFF Research Database (Denmark)

    Ramsgaard Thomsen, Mette; Tamke, Martin; Peder Pedersen, Claus

    2012-01-01

    The publication reports on the international research network 'Digital Crafting' organised in the period 2009-2011. The research network investigated profound changes in the design and building of architecture. Developing the term Digital Crafting, the network examined how the maturing of interfa......The publication reports on the international research network 'Digital Crafting' organised in the period 2009-2011. The research network investigated profound changes in the design and building of architecture. Developing the term Digital Crafting, the network examined how the maturing...

  19. Transient effects in beam-plasma interactions in a space simulation chamber stimulated by a fast pulse electron gun

    Science.gov (United States)

    Raitt, W. J.; Banks, P. M.; Denig, W. F.; Anderson, H. R.

    1982-01-01

    Interest in the interaction of electron beams with plasma generated by ionization caused by the primary electron beam was stimulated by the need to develop special vacuum tubes to operate in the kMHz frequency region. The experiments of Getty and Smullin (1963) indicated that the interaction of an energetic electron beam with its self-produced plasma resulted in the emission of wave energy over a wide range of frequencies associated with cyclotron and longitudinal plasma instabilities. This enhanced the thermal plasma density in the vicinity of the beam, and the term Beam-Plasma Discharge (BPD) was employed to described this phenomenon. The present investigation is concerned with some of the transient phenomena associated with wave emission during the beam switch-on and switch-off periods. Results are presented on the changes in electron energy spectra on a time scale of tens of milliseconds following beam switch-on. The results are discussed in terms of the beam plasma discharge phenomenon.

  20. Transient effects in beam-plasma interactions in a space simulation chamber stimulated by a fast pulse electron gun

    International Nuclear Information System (INIS)

    Raitt, W.J.; Banks, P.M.

    1982-01-01

    Interest in the interaction of electron beams with plasma generated by ionization caused by the primary electron beam was stimulated by the need to develop special vacuum tubes to operate in the kMHz frequency region. The experiments of Getty and Smullin (1963) indicated that the interaction of an energetic electron beam with its self-produced plasma resulted in the emission of wave energy over a wide range of frequencies associated with cyclotron and longitudinal plasma instabilities. This enhanced the thermal plasma density in the vicinity of the beam, and the term Beam-Plasma Discharge (BPD) was employed to described this phenomenon. The present investigation is concerned with some of the transient phenomena associated with wave emission during the beam switch-on and switch-off periods. Results are presented on the changes in electron energy spectra on a time scale of tens of milliseconds following beam switch-on. The results are discussed in terms of the beam plasma discharge phenomenon. 5 references

  1. The craft of scientific writing

    CERN Document Server

    Alley, Michael

    2019-01-01

    The Craft of Scientific Writing uses scores of examples to show the differences between scientific writing that informs and persuades and scientific writing that does not. Focusing on technical papers, dissertations, and reports, this text shows engineers, scientists, and technical professionals the five keys of style that distinguish the best scientific documents: (1) having the details presented in a methodical fashion, (2) having the important details emphasized, (3) having ideas cast into clear and precise sentences, (4) having clear connections between those ideas, and (5) having illustrations that persuade.

  2. Analysis of the ballooning deformation of an internally pressurized thin-wall tube during fast thermal transients

    International Nuclear Information System (INIS)

    Lin, E.I.H.

    1977-01-01

    A large-strain, time-dependent thermoplastic analysis of ballooning deformation was developed. The true (or lagorithmic) strains, the Von Mises yield criterion and Prandtl-Reuss flow rules were used. The constitutive equation was expressed in terms of the temperature, effective stress, strain and strain rate. Material isotropy was assumed as a first approximation; note that at high temperatures even zircaloy tends to lose a substantial amount of its low-temperature anisotropy. The axisymmetry of ballooning was also assumed, which has actually been verified by numerous experiments to be accurate throughout the course of ballooning, except in the final stage when rupture is imminent. The thin-shell approximation was made, which proved to be adequate for the standard fuel claddings and which was advantageous in that the averaged state of stress was rendered determinate. The analysis led to a set of non-linear ordinary differential equations, which was then integrated by a fifth-order Runge-Kutta routine. The general formulation allows for a direct interpretation of the experimentally-observed effects of the heating rate and cladding axial constraints on the ballooning behavior. Its implications on the flow-blockage and cladding-rupture evaluations were discussed. The analysis was applied to zircaloy claddings subjected to simulated thermal transient conditions. Most of the required material properties were taken from the existing uniaxial tensile test data. Analyses were performed at a uniform heating rate of 115 0 C/sec with internal pressures ranging from 100 to 1200 psi. Satisfactory agreement was obtained between the predictions and the diametral strain-time data available from tube-burst tests

  3. An Optical and Infrared Time-domain Study of the Supergiant Fast X-Ray Transient Candidate IC 10 X-2

    Science.gov (United States)

    Kwan, Stephanie; Lau, Ryan M.; Jencson, Jacob; Kasliwal, Mansi M.; Boyer, Martha L.; Ofek, Eran; Masci, Frank; Laher, Russ

    2018-03-01

    We present an optical and infrared (IR) study of IC 10 X-2, a high-mass X-ray binary in the galaxy IC 10. Previous optical and X-ray studies suggest that X-2 is a Supergiant Fast X-ray Transient: a large-amplitude (factor of ∼100), short-duration (hours to weeks) X-ray outburst on 2010 May 21. We analyze R- and g-band light curves of X-2 from the intermediate Palomar Transient Factory taken between 2013 July 15 and 2017 February 14 that show high-amplitude (≳1 mag), short-duration (≲8 days) flares and dips (≳0.5 mag). Near-IR spectroscopy of X-2 from Palomar/TripleSpec show He I, Paschen-γ, and Paschen-β emission lines with similar shapes and amplitudes as those of luminous blue variables (LBVs) and LBV candidates (LBVc). Mid-IR colors and magnitudes from Spitzer/Infrared Array Camera photometry of X-2 resemble those of known LBV/LBVcs. We suggest that the stellar companion in X-2 is an LBV/LBVc and discuss possible origins of the optical flares. Dips in the optical light curve are indicative of eclipses from optically thick clumps formed in the winds of the stellar counterpart. Given the constraints on the flare duration (0.02–0.8 days) and the time between flares (15.1 ± 7.8 days), we estimate the clump volume filling factor in the stellar winds, f V , to be 0.01interpret the origin of the optical flares as the accretion of clumps formed in the winds of an LBV/LBVc onto the compact object.

  4. Crafting in context: Exploring when job crafting is dysfunctional for performance effectiveness.

    Science.gov (United States)

    Dierdorff, Erich C; Jensen, Jaclyn M

    2018-05-01

    Job crafting theory purports that the consequences of revising one's work role can be simultaneously beneficial and detrimental. Previous research, however, has almost exclusively emphasized the beneficial outcomes of job crafting. In the current study, we proposed dysfunctional consequences of crafting for performance-related outcomes in the form of a U-shaped relationship between job crafting and performance effectiveness (managerial ratings of job proficiency and peer ratings of citizenship behavior). We further predicted that elements of the task context (autonomy and ambiguity) and the social context (interdependence and social support) moderate these curvilinear relationships. Consistent with previous research, job crafting displayed positive and linear effects on work-related attitudes (job satisfaction and affective commitment). Consistent with our predictions, moderate levels of crafting were associated with dysfunctional performance-related outcomes and features of work context either exacerbated or dissipated these dysfunctional consequences of job crafting for individuals. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

  5. Crafting forgiveness accounts after war

    DEFF Research Database (Denmark)

    Meinert, Lotte; Obika, Julaina; Whyte, Susan Reynolds

    2014-01-01

    artist, the authors collected personal voice accounts of these ‘social repair’ processes and audio edited them in order to share them with a local public. The editing process raised critical issues regarding ‘editing for effect’, which are of wider relevance for discussions of ethnographic representation...... and social processes of editing past experience. As a way of crafting and controlling material, editing is always ‘for effect’. But the authors were struck by the powerful potentials of this artistic editing and by the difficulty in foreseeing or controlling its consequences among listeners. They suggest...... that personal processes of forgiveness resemble processes of editing, in the sense that past experience is revised and given narrative form, with an effect on the present and future of social relationships. When we edit, we foreground and background segments of data and experience, and cut parts of our...

  6. Adaptation and implementation of the TRACE code for transient analysis on designs of cooled lead fast reactors; Adaptacion y aplicacion del codigo TRACE para el analisis de transitorios en disenos de reactores rapidos refrigerados por plomo

    Energy Technology Data Exchange (ETDEWEB)

    Lazaro, A.; Ammirabile, L.; Martorell, S.

    2014-07-01

    The article describes the changes implemented in the TRACE code to include thermodynamic tables of liquid lead drawn from experimental results. He then explains the process for developing a thermohydraulic model for the prototype ALFRED and analysis of a selection of representative transient conducted within the framework of international research projects. The study demonstrates the applicability of TRACE code to simulate designs of cooled lead fast reactors and exposes the high safety margins are there in this technology to accommodate the most severe transients identified in their security study. (Author)

  7. 46 CFR 117.130 - Stowage of survival craft.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Stowage of survival craft. 117.130 Section 117.130... AND ARRANGEMENTS Survival Craft Arrangements and Equipment § 117.130 Stowage of survival craft. (a) Each survival craft must be: (1) Secured to the vessel by a painter with a float-free link permanently...

  8. 46 CFR 133.130 - Stowage of survival craft.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Stowage of survival craft. 133.130 Section 133.130... SYSTEMS Requirements for All OSVs § 133.130 Stowage of survival craft. (a) General. Each survival craft must be stowed as follows: (1) Each survival craft must be as close to the accommodation and service...

  9. 46 CFR 180.175 - Survival craft equipment.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Survival craft equipment. 180.175 Section 180.175... TONS) LIFESAVING EQUIPMENT AND ARRANGEMENTS Survival Craft Arrangements and Equipment § 180.175 Survival craft equipment. (a) General. Each item of survival craft equipment must be of good quality, and...

  10. 46 CFR 199.130 - Stowage of survival craft.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Stowage of survival craft. 199.130 Section 199.130... craft. (a) General. Each survival craft must be stowed— (1) As close to the accommodation and service spaces as possible; (2) So that neither the survival craft nor its stowage arrangements will interfere...

  11. 46 CFR 117.175 - Survival craft equipment.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Survival craft equipment. 117.175 Section 117.175... AND ARRANGEMENTS Survival Craft Arrangements and Equipment § 117.175 Survival craft equipment. (a) General. Each item of survival craft equipment must be of good quality, and efficient for the purpose it...

  12. 46 CFR 117.150 - Survival craft embarkation arrangements.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Survival craft embarkation arrangements. 117.150 Section... EQUIPMENT AND ARRANGEMENTS Survival Craft Arrangements and Equipment § 117.150 Survival craft embarkation... apparatus when either— (1) The embarkation station for the survival craft is on a deck more than 4.5 meters...

  13. 46 CFR 180.130 - Stowage of survival craft.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Stowage of survival craft. 180.130 Section 180.130... TONS) LIFESAVING EQUIPMENT AND ARRANGEMENTS Survival Craft Arrangements and Equipment § 180.130 Stowage of survival craft. (a) Each survival craft must be: (1) Secured to the vessel by a painter with a...

  14. 46 CFR 28.310 - Launching of survival craft.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Launching of survival craft. 28.310 Section 28.310... Operate With More Than 16 Individuals on Board § 28.310 Launching of survival craft. A gate or other... each survival craft which weighs more than 110 pounds (489 Newtons), to allow the survival craft to be...

  15. DEVELOPMENT OF INTERACTIVE MULTIMEDIA COURSEWARE (E-CRAFT FOR CRAFT EDUCATION

    Directory of Open Access Journals (Sweden)

    Salyani OSMAN,

    2012-08-01

    Full Text Available The way of teaching and learning traditional crafts have always used traditional apprenticeship learning methods where the expert facilitates transfer of practice skill sets to novices. As a craft has been taught in conventional approach, the students and experts have been facing several problems especially when expert needs to teach a group of students. An appropriate mapping of craft education and Information and Communication Technologies using Multimedia technology for instance, has the potential in transforming traditional craft learning into more flexible environment. This paper reports on a research project on development of an interactive multimedia courseware package for teaching and learning traditional craft called e-CRAFT. The e-CRAFT is specially designed for songket weaving course taught to certificate and diploma students from Fakulti Seni Kraf Tenunan in their first year study at Institut Kraf Negara, Malaysia (National Craft Institute. The courseware was developed in a web-based environment and overall development process was based on the Dick and Carey's process model and conceptual Instructional Design framework. It is made up of eight learning modules: Introduction, Materials & Tools, Knowing Motifs, Learn How to Weave, Quizzes & Test, Online Discussion, Glossary and Help module. In order to test whether the courseware is suitable in terms of usability, pilot testing was done to a sample of 10 students. The results from pilot test received positive feedback which signifies the courseware is considered acceptable for effectiveness study and help for further improve of the e-CRAFT courseware.

  16. Modern electrical installation for craft students

    CERN Document Server

    Scaddan, Brian

    2013-01-01

    Modern Electrical Installation for Craft Students, Volume 2, Third Edition discusses several topics concerning electrical installations. The book is comprised of eight chapters that deal with craft theory, associated subjects, and electrical industries. Chapter 1 covers inductors and inductance, while Chapter 2 tackles capacitors and capacitance. Chapter 3 deals with inductance and capacitance in installation work. The book also discusses cells, batteries, and transformers. The electrical industries, control and earthing, and testing are also dealt with. The last chapter discusses the basic el

  17. Employees’ Perceived Opportunities to Craft and In-Role Performance: The Mediating Role of Job Crafting and Work Engagement

    Science.gov (United States)

    van Wingerden, Jessica; Poell, Rob F.

    2017-01-01

    The present study was designed to gain knowledge of the relationship between employees’ perceived opportunities to craft, their actual job crafting behavior and, in line with JD-R theory, subsequently their work engagement and performance. Although scholars have suggested that employees’ perceived opportunities to craft their job may predict their actual job crafting behavior, which may have consequences for their well-being and performance, no study has examined the relationships between these variables. We collected data among a heterogeneous group of Dutch employees (N = 2090). Participants of the study reported their perceived opportunities to craft, job crafting behavior, work engagement and performance. Results indicated that individuals who experience a high level of opportunities to craft reported higher levels of job crafting behavior. In turn, perceived opportunities to craft and job crafting behavior related to higher levels of work engagement and subsequently performance. We discuss the implications of these findings for theory and practice. PMID:29118729

  18. Employees' Perceived Opportunities to Craft and In-Role Performance: The Mediating Role of Job Crafting and Work Engagement.

    Science.gov (United States)

    van Wingerden, Jessica; Poell, Rob F

    2017-01-01

    The present study was designed to gain knowledge of the relationship between employees' perceived opportunities to craft, their actual job crafting behavior and, in line with JD-R theory, subsequently their work engagement and performance. Although scholars have suggested that employees' perceived opportunities to craft their job may predict their actual job crafting behavior, which may have consequences for their well-being and performance, no study has examined the relationships between these variables. We collected data among a heterogeneous group of Dutch employees ( N = 2090). Participants of the study reported their perceived opportunities to craft, job crafting behavior, work engagement and performance. Results indicated that individuals who experience a high level of opportunities to craft reported higher levels of job crafting behavior. In turn, perceived opportunities to craft and job crafting behavior related to higher levels of work engagement and subsequently performance. We discuss the implications of these findings for theory and practice.

  19. Development of Interactive Multimedia Courseware (e-CRAFT) for Craft Education

    Science.gov (United States)

    Osman, Salyani; Sahari, Noraidah; Zin, Nor Azan Mat

    2012-01-01

    The way of teaching and learning traditional crafts have always used traditional apprenticeship learning methods where the expert facilitates transfer of practice skill sets to novices. As a craft has been taught in conventional approach, the students and experts have been facing several problems especially when expert needs to teach a group of…

  20. Numerical scheme for optimization of xenon transient processes in a reactor. Problem on fast response without a limitation for phase variables

    International Nuclear Information System (INIS)

    Gerasimov, A.S.

    1975-01-01

    A numerical diagram is suggested of minimizing a period of xenon transient process in the reactor without any limitation of xenon-135 concentration. The problem is solved with a computer in a point model. Pontryagin's maximum principle is used so as to check optimization of the transient process

  1. The craft of intensive care medicine.

    Science.gov (United States)

    Carmel, Simon

    2013-06-01

    The practice of medicine is often represented as a dualism: is medicine a 'science' or an 'art'? This dualism has been long-lasting, with evident appeal for the medical profession. It also appears to have been rhetorically powerful, for example in enabling clinicians to resist the encroachment of 'scientific' evidence-based medicine into core areas of medical work such as individual clinical judgement. In this article I want to make the case for a more valid conceptualisation of medical practice: that it is a 'craft' activity. The case I make is founded on a theoretical synthesis of the concept of craft, combined with an analysis of ethnographic observations of routine medical practice in intensive care. For this context the craft aspects of medical work can be seen in how biomedical and other types of knowledge are used in practice, the embodied skills and practical judgement of practitioners and the technological and material environment. These aspects are brought together in two conceptual dimensions for 'craft': first, the application of knowledge; second, interaction with the material world. Some practical and political implications of a 'craft' metaphor for medical practice are noted. © 2013 The Author. Sociology of Health & Illness © 2013 Foundation for the Sociology of Health & Illness/John Wiley & Sons Ltd.

  2. From Gender-segregated Subjects to Multi-material Craft: Craft Student Teachers’Views on the Future of the Craft Subject

    Directory of Open Access Journals (Sweden)

    Jaana Lepistö

    2015-12-01

    Full Text Available This paper describes the views of student teachers of craft about the future of craft as a school subject. The study was conducted at the University of Turku, Department of Teacher Education, in Rauma in 2014. The literature review revealed that the subject of craft in Finnish basic education is understood as a dialog between the maker and the materials. However, teaching and learning craft in schools and in teacher education has a strong gender-based tradition. The aim of this study is to investigate student teachers’ understanding of craft as a school subject in the future and their solutions to teaching craft in basic education. The data were collected from essays (N = 20 written by student teachers of craft. The essays were analyzed qualitatively using content analysis. The results showed that the student teachers of craft viewed holistic craft, reflective action readiness, entrepreneurial behaviour, multiple skills, the use of versatile materials, and craft as sources of pleasure and the main solutions for the future of craft as a subject.

  3. Automatic Construction by Contour Crafting Technology

    Directory of Open Access Journals (Sweden)

    Mohammad Reza Khorramshahi

    2017-07-01

    Full Text Available Contour Crafting is a novel technology in construction industry based on 3D printing that uses robotics to construct free form building structures by repeatedly laying down layers of material such as concrete. It is actually an approach to scale up automatic fabrication from building small industrial parts to constructing buildings. However, there are little information about contour crafting (CC in current use; present paper aims to describe the operational steps of creating a whole building by the machine reviewing relevant literature. Furthermore, it will represent the advantages of CC usage compared to traditional construction methods, as well as its applicability in construction industry.

  4. Crafting by concepts fiber arts and mathematics

    CERN Document Server

    Belcastro, Sarah-Marie

    2016-01-01

    From the editors of the popular Making Mathematics with Needlework, this book presents projects that highlight the relationship between types of needlework and mathematics. Chapters start with accessible overviews presenting the interplay between mathematical concepts and craft expressions. Following sections explain the mathematics in more detail, and provide suggestions for classroom activities. Each chapter ends with specific crafting instructions. Types of needlework included are knitting, crochet, needlepoint, cross-stitch, quilting, temari balls, beading, tatting, and string art. Instructions are written as ordinary patterns, so the formatting and language will be familiar to crafters.

  5. Friedel-Crafts Acylation with Amides

    Science.gov (United States)

    Raja, Erum K.; DeSchepper, Daniel J.; Nilsson Lill, Sten O.; Klumpp, Douglas A.

    2012-01-01

    Friedel-Crafts acylation has been known since the 1870s and it is an important organic synthetic reaction leading to aromatic ketone products. Friedel-Crafts acylation is usually done with carboxylic acid chlorides or anhydrides while amides are generally not useful substrates in these reactions. Despite being the least reactive carboxylic acid derivative, we have found a series of amides capable of providing aromatic ketones in good yields (55–96%, 17 examples). We propose a mechanism involving diminished C-N resonance through superelectrophilic activation and subsequent cleavage to acyl cations. PMID:22690740

  6. 46 CFR 199.230 - Stowage of survival craft.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Stowage of survival craft. 199.230 Section 199.230... Stowage of survival craft. (a) To meet the requirements of § 199.130(b)(1), each lifeboat on a passenger... height of a survival craft must take into account the vessel's escape provisions, the vessel's size, and...

  7. 46 CFR 180.200 - Survival craft-general.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Survival craft-general. 180.200 Section 180.200 Shipping...) LIFESAVING EQUIPMENT AND ARRANGEMENTS Number and Type of Survival Craft § 180.200 Survival craft—general. (a) Each survival craft required on a vessel by this part must meet one of the following: (1) For an...

  8. 46 CFR 180.150 - Survival craft embarkation arrangements.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Survival craft embarkation arrangements. 180.150 Section... (UNDER 100 GROSS TONS) LIFESAVING EQUIPMENT AND ARRANGEMENTS Survival Craft Arrangements and Equipment § 180.150 Survival craft embarkation arrangements. (a) A launching appliance approved under approval...

  9. 47 CFR 97.215 - Telecommand of model craft.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Telecommand of model craft. 97.215 Section 97... AMATEUR RADIO SERVICE Special Operations § 97.215 Telecommand of model craft. An amateur station transmitting signals to control a model craft may be operated as follows: (a) The station identification...

  10. 75 FR 50773 - Invocation of Sunken Military Craft Act

    Science.gov (United States)

    2010-08-17

    ... Military Craft Act AGENCY: Coast Guard, DHS. ACTION: Notice. SUMMARY: The Coast Guard is announcing that a C-130 aircraft which crashed off the coast of California is a sunken military craft. It is therefore... is announcing that the wreckage of CG 1705 is a sunken military craft, and is therefore protected...

  11. 46 CFR 108.530 - Stowage of survival craft.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Stowage of survival craft. 108.530 Section 108.530... AND EQUIPMENT Lifesaving Equipment § 108.530 Stowage of survival craft. (a) General. Each survival craft required to be served by a launching appliance or marine evacuation system must be stowed as...

  12. 46 CFR 199.290 - Stowage of survival craft.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Stowage of survival craft. 199.290 Section 199.290... of survival craft. (a) To meet the requirements of § 199.130(b)(1), each lifeboat— (1) On a cargo... required under § 199.261(e), no stowage position or muster and embarkation station for a survival craft on...

  13. 46 CFR 122.518 - Inflatable survival craft placards.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Inflatable survival craft placards. 122.518 Section 122... Preparations for Emergencies § 122.518 Inflatable survival craft placards. (a) Every vessel equipped with an inflatable survival craft must have approved placards or other cards containing instructions for launching...

  14. 32 CFR 700.872 - Ships and craft in drydock.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 5 2010-07-01 2010-07-01 false Ships and craft in drydock. 700.872 Section 700... Special Circumstances/ships in Naval Stations and Shipyards § 700.872 Ships and craft in drydock. (a) The... ship or craft, not in commission, is in a naval drydock, the provisions of this article shall apply...

  15. 33 CFR 401.58 - Pleasure craft scheduling.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false Pleasure craft scheduling. 401.58... OF TRANSPORTATION SEAWAY REGULATIONS AND RULES Regulations Seaway Navigation § 401.58 Pleasure craft scheduling. (a) The transit of pleasure craft shall be scheduled by the traffic controller or the officer in...

  16. 29 CFR 1202.8 - Hearings on craft or class.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 4 2010-07-01 2010-07-01 false Hearings on craft or class. 1202.8 Section 1202.8 Labor... craft or class. In the event the contesting parties or organizations are unable to agree on the..., specifying the craft or class of employees eligible to participate in the designation of representatives. ...

  17. 46 CFR 108.525 - Survival craft number and arrangement.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Survival craft number and arrangement. 108.525 Section... UNITS DESIGN AND EQUIPMENT Lifesaving Equipment § 108.525 Survival craft number and arrangement. (a... arrangement of survival craft: (1) Lifeboats with an aggregate capacity to accommodate the total number of...

  18. 46 CFR 185.518 - Inflatable survival craft placards.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Inflatable survival craft placards. 185.518 Section 185... 100 GROSS TONS) OPERATIONS Preparations for Emergencies § 185.518 Inflatable survival craft placards. (a) Every vessel equipped with an inflatable survival craft must have approved placards or other...

  19. 46 CFR 28.125 - Stowage of survival craft.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Stowage of survival craft. 28.125 Section 28.125... FISHING INDUSTRY VESSELS Requirements for All Vessels § 28.125 Stowage of survival craft. (a) Each..., inflatable buoyant apparatus, and any auxiliary craft used in their place, must be kept readily accessible...

  20. 46 CFR 28.130 - Survival craft equipment.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Survival craft equipment. 28.130 Section 28.130 Shipping... INDUSTRY VESSELS Requirements for All Vessels § 28.130 Survival craft equipment. (a) General. Each item of survival craft equipment must be of good quality, effective for the purpose it is intended to serve, and...

  1. 47 CFR 80.1095 - Survival craft equipment.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Survival craft equipment. 80.1095 Section 80... for Ship Stations § 80.1095 Survival craft equipment. (a) At least three two-way VHF radiotelephone... they can be rapidly placed in any survival craft other than life rafts required by Regulation III/26.1...

  2. 46 CFR 28.805 - Launching of survival craft.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Launching of survival craft. 28.805 Section 28.805... FISHING INDUSTRY VESSELS Aleutian Trade Act Vessels § 28.805 Launching of survival craft. In addition to the survival craft requirements in subpart B, each vessel must have a gate or other opening in the...

  3. The Art and Craft of Science

    Science.gov (United States)

    Root-Bernstein, Robert; Root-Bernstein, Michele

    2013-01-01

    Walter Alvarez, a doctor and physiologist of some renown, decided to send his scientifically talented son, Luis, to an arts and crafts school where Luis took industrial drawing and woodworking instead of calculus. Luis Alvarez won the Nobel Prize in physics in 1968. Einstein was certainly not a standout in his mathematics and physics classes. Yet…

  4. Craft Knowledge: Of Disciplinarity in Writing Studies

    Science.gov (United States)

    Johnson, Robert R.

    2010-01-01

    This article argues that craft knowledge can provide a disciplinary rationale for writing studies. It draws from the ancient concepts of teche, phronesis, and the four causes of making and makes the case for a definition of disciplinary knowledge fitting for writing studies. The article concludes with a conceptual framework that can serve as a…

  5. Rationalizing Cooperation: Moroccan Craft, Politics, and Education

    Science.gov (United States)

    Nicholas, Claire

    2018-01-01

    State attempts to rationalize Moroccan craft education reflect the ambivalent status of traditional knowledge in a modern economy. Female artisans, recently organized as a cooperative, navigate this ambivalence in a weaving "theory" class and in their "occupation" of the cooperative structure itself. During performances of…

  6. The nature of creativity in craft

    DEFF Research Database (Denmark)

    Glaveanu, Vlad Petre

    2012-01-01

    The present article explores the nature of creativity in craft and does so with the help of a case study of traditional Easter egg decoration. It starts by positioning the domain of folk art in relation to fine art and within a larger category of everyday life forms of creative expression...

  7. Antecedents of daily team job crafting

    NARCIS (Netherlands)

    Mäkikangas, Anne; Bakker, Arnold B.; Schaufeli, Wilmar B.

    2017-01-01

    This study investigated potential antecedents of team job crafting defined as the extent to which team members engage together in increasing (social and structural) job resources and challenges, and decreasing hindering job demands. Mindful of the teamwork literature, we hypothesized that individual

  8. Intermittent fasting during Ramadan causes a transient increase in total, LDL, and HDL cholesterols and hs-CRP in ethnic obese adolescents

    NARCIS (Netherlands)

    Radhakishun, N.N.E.; Blokhuis, C.; Vliet, M.; Von Rosenstiel, I.; Weijer, O.; Heijmans, M.W.; Beijnen, J.; Brandjes, D.; Diamant, M.

    2014-01-01

    The radical change of lifestyle during Ramadan fast has shown to affect cardiometabolic risk variables in adults. In youth, however, no studies are available. We aimed to evaluate the effect of Ramadan fast on Body Mass Index (BMI) and the cardiometabolic profile of obese adolescents. A prospective

  9. Manned and Unmanned Aircraft Effectiveness in Fast Attack Craft / Fast Inshore Attack Craft ASUW Kill Chain Execution

    Science.gov (United States)

    2016-09-01

    aircraft: the MH-60S Knighthawk, the MQ-8C Fire Scout and the RQ-21A Blackjack . We choose the aircraft configurations based on unclassified Naval Air...unmanned aerial vehicles (UAVs) in support of operational and tactical requirements. This analysis evaluates the life cycle costs and combat...reduced. The scope of this benefit is significantly greater for UAVs versus manned aircraft due to the lack of life support and in-aircraft control

  10. Meaningful work and work engagement : The mediating role of perceived opportunity to craft and job crafting behavior

    NARCIS (Netherlands)

    Van Wingerden, Jessica; van der Stoep, Joost; Poell, R.F.

    2018-01-01

    This study examines the impact of meaningful work on employees’ level of work engagement as mediated by perceived opportunities to craft and job crafting. Based on the literature on meaningful work and job crafting, we hypothesize that meaningful work has a positive relationship with an employee’s

  11. High diagnostic yield and accuracy of history, physical examination, and ECG in patients with transient loss of consciousness in FAST: The fainting assessment study

    NARCIS (Netherlands)

    van Dijk, Nynke; Boer, Kimberly R.; Colman, Nancy; Bakker, Annemieke; Stam, Jan; van Grieken, Johannes J. M.; Wilde, Arthur A. M.; Linzer, Mark; Reitsma, Johannes B.; Wieling, Wouter

    2008-01-01

    Yield and Accuracy of Diagnosing TLOC. Background: Transient loss of consciousness (TLOC) is a common clinical problem. Objective: The aim of this study was to assess the yield and accuracy of the initial evaluation, consisting of standardized history, physical examination, and ECG performed by

  12. From Gender-segregated Subjects to Multi-material Craft: Craft Student Teachers’Views on the Future of the Craft Subject

    OpenAIRE

    Jaana Lepistö; Eila Lindfors

    2015-01-01

    This paper describes the views of student teachers of craft about the future of craft as a school subject. The study was conducted at the University of Turku, Department of Teacher Education, in Rauma in 2014. The literature review revealed that the subject of craft in Finnish basic education is understood as a dialog between the maker and the materials. However, teaching and learning craft in schools and in teacher education has a strong gender-based tradition. The aim of this study is to in...

  13. Summarizing evaluation of the results of in-pile experiments for the transient fission gas release under accidental conditions of fast breeders

    International Nuclear Information System (INIS)

    Fischer, E.A.; Vaeth, L.

    1989-04-01

    The transient fission gas behaviour and the fission gas induced fuel motion were studied in in-pile experiments in different countries, under conditions typical for hypothetical accidents. This report summarizes first the different experiment series and the main results. Then, a comparative evaluation is given, which provides a basis for the choice of the fission gas parameters in the accident code SAS3D

  14. An improved approach to exchange non-rectangular departments in CRAFT algorithm

    OpenAIRE

    Esmaeili Aliabadi, Danial; Pourghannad, Behrooz

    2012-01-01

    In this Paper, an algorithm which improves CRAFT algorithm’s efficacy is developed. CRAFT is an algorithm widely used to solve facility layout problems. Our proposed method, named Plasma, can be used to improve CRAFT results. In this note, Plasma algorithm is tested in several sample problems. The comparison between Plasma and classic CRAFT and also Micro-CRAFT indicates that Plasma is successful in cost reduction in comparison with CRAFT and Micro-CRAFT.

  15. Sustainable Innovation of Glass Design and Craft

    DEFF Research Database (Denmark)

    Sparre-Petersen, Maria

    2014-01-01

    Barely any research has been made into the implementation of sustainable principles in glass design and craft. A common tendency among students and practitioners is to consider it problematic if not impossible to develop a “truly sustainable practice”. Generally glass crafts people and glass...... designers aim to explore new aesthetic possibilities for the material and see sustainability as a hindrance for aesthetic freedom. On the contrary the field of design has strong and growing emphasis on sustainable development. Fry (2009) argues that what he defines as sustain-ability is not an end goal...... but an ongoing process of re-directing the way we design our world and thereby our future. This approach along with further research into sustainable development within the field of design and combined with material specific methodologies may reveal new possibilities for sustainable as well as aesthetic...

  16. Concept annotation in the CRAFT corpus.

    Science.gov (United States)

    Bada, Michael; Eckert, Miriam; Evans, Donald; Garcia, Kristin; Shipley, Krista; Sitnikov, Dmitry; Baumgartner, William A; Cohen, K Bretonnel; Verspoor, Karin; Blake, Judith A; Hunter, Lawrence E

    2012-07-09

    Manually annotated corpora are critical for the training and evaluation of automated methods to identify concepts in biomedical text. This paper presents the concept annotations of the Colorado Richly Annotated Full-Text (CRAFT) Corpus, a collection of 97 full-length, open-access biomedical journal articles that have been annotated both semantically and syntactically to serve as a research resource for the biomedical natural-language-processing (NLP) community. CRAFT identifies all mentions of nearly all concepts from nine prominent biomedical ontologies and terminologies: the Cell Type Ontology, the Chemical Entities of Biological Interest ontology, the NCBI Taxonomy, the Protein Ontology, the Sequence Ontology, the entries of the Entrez Gene database, and the three subontologies of the Gene Ontology. The first public release includes the annotations for 67 of the 97 articles, reserving two sets of 15 articles for future text-mining competitions (after which these too will be released). Concept annotations were created based on a single set of guidelines, which has enabled us to achieve consistently high interannotator agreement. As the initial 67-article release contains more than 560,000 tokens (and the full set more than 790,000 tokens), our corpus is among the largest gold-standard annotated biomedical corpora. Unlike most others, the journal articles that comprise the corpus are drawn from diverse biomedical disciplines and are marked up in their entirety. Additionally, with a concept-annotation count of nearly 100,000 in the 67-article subset (and more than 140,000 in the full collection), the scale of conceptual markup is also among the largest of comparable corpora. The concept annotations of the CRAFT Corpus have the potential to significantly advance biomedical text mining by providing a high-quality gold standard for NLP systems. The corpus, annotation guidelines, and other associated resources are freely available at http://bionlp-corpora.sourceforge.net/CRAFT/index.shtml.

  17. Crafted - meisterdatud / Mihkel Tüür

    Index Scriptorium Estoniae

    Tüür, Mihkel, 1976-

    2012-01-01

    12. Alvar Aalto sümpoosion Jyväskyläs 10.-12. augustil 2012 teemal "Crafted". Kuraator Pekka Heikkinen. Pikemalt Mohsen Mostafavi ettekandest "Arhitektuur on materiaalne" ja Jürg Conzetti ettekandest "Strukturaalse tava jätkamine". Autori sõnul jäi kõlama mõte, et meisterlikult ehitatud maja saab olla ainus arhitektuuri tegelik mõõde

  18. The meanings of craft to an occupational therapist.

    Science.gov (United States)

    Harris, Emma

    2008-06-01

    Craft was the first therapeutic occupation of occupational therapy. Since the early days of the profession, the value of craft in practice is a topic that has been discussed with fluctuating interest. Recent discussions by occupational therapists have reinforced that although craft is relevant to occupational therapy, there are uncertainties about its place in contemporary practice. Presently, scholars have identified that occupation is both the center of human experience and the core of our profession. Therefore, this study aimed to begin to clarify the meaning of craft to practice today by gaining a deep understanding of the meanings that one occupational therapist attributes to craft. Using narrative inquiry, data were gathered through a conversation held between the research participant and myself. A reflexive journal was also kept to support this data gathering process. Narrative analysis enabled intimate engagement with the data and the emergence of themes and sub-themes. The findings, in the form of an interpretive story, suggest first, that craft-making has therapeutic value; second, that reasoning about the therapeutic use of craft is similar to reasoning about other therapeutic activities; and third, that personal experience with craft-making can influence the selection of craft as therapeutic media. From this study, further research into the impact personal and professional experiences can have on choice of therapeutic media and an analysis of the sociopolitical context of the meanings that occupational therapists attribute to craft-making is suggested.

  19. Leading to Crafting: The Relation Between Leadership Perception and Nurses' Job Crafting.

    Science.gov (United States)

    Esteves, Tiago; Pereira Lopes, Miguel

    2017-06-01

    Whenever individuals adapt their jobs to make them closer of their personal preferences, they are performing job crafting. This study aims to investigate if the way nurses perceive their leaders' behaviors is related with job crafting development. To do so, a quantitative analysis was conducted among a group of 325 Portuguese nurses. Results indicate that the perception of an empowering leader was found to be strongly related with the increase of challenges in the work environment, and with the development of stronger relations with direct managers and co-workers, which are two job crafting dimensions. The perception of a directive leader was found to be positively related with the avoidance of performing hindering tasks. Strengthening relations with direct managers and co-workers was found to be particularly related to leadership perception. Theoretical and practical implications are discussed.

  20. Job Crafting, Employee Well-being, and Quality of Care.

    Science.gov (United States)

    Yepes-Baldó, Montserrat; Romeo, Marina; Westerberg, Kristina; Nordin, Maria

    2018-01-01

    The main objective is to study the effects of job crafting activities of elder care and nursing home employees on their perceived well-being and quality of care in two European countries, Spain and Sweden. The Job Crafting, the General Health, and the Quality of Care questionnaires were administered to 530 employees. Correlations and hierarchical regression analyses were performed. Results confirm the effects of job crafting on quality of care ( r = .291, p employees' well-being ( r = .201, p well-being in Spain and Sweden and with quality of care in Spain. On the contrary, in Sweden, the relationship between job crafting and well-being was not linear. Job crafting contributes significantly to employees' and residents' well-being. Management should promote job crafting to co-create meaningful and productive work. Cultural effects are proposed to explain the differences found.

  1. Code assessment and modelling for Design Basis Accident analysis of the European Sodium Fast Reactor design. Part II: Optimised core and representative transients analysis

    Energy Technology Data Exchange (ETDEWEB)

    Lazaro, A., E-mail: aulach@iqn.upv.es [JRC-IET European Commission, Westerduinweg 3, PO BOX 2, 1755 ZG Petten (Netherlands); Schikorr, M. [KIT, Institute for Neutron Physics and Reactor Technology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany); Mikityuk, K. [PSI, Paul Scherrer Institut, 5232 Villigen (Switzerland); Ammirabile, L. [JRC-IET European Commission, Westerduinweg 3, PO BOX 2, 1755 ZG Petten (Netherlands); Bandini, G. [ENEA, Via Martiri di Monte Sole 4, 40129 Bologna (Italy); Darmet, G.; Schmitt, D. [EDF, 1 Avenue du Général de Gaulle, 92141 Clamart (France); Dufour, Ph.; Tosello, A. [CEA, St. Paul lez Durance, 13108 Cadarache (France); Gallego, E.; Jimenez, G. [UPM, José Gutiérrez Abascal, 2, 28006 Madrid (Spain); Bubelis, E.; Ponomarev, A.; Kruessmann, R.; Struwe, D. [KIT, Institute for Neutron Physics and Reactor Technology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany); Stempniewicz, M. [NRG, Utrechtseweg 310, P.O. Box-9034, 6800 ES Arnhem (Netherlands)

    2014-10-01

    Highlights: • Benchmarked models have been applied for the analysis of DBA transients of the ESFR design. • Two system codes are able to simulate the behavior of the system beyond sodium boiling. • The optimization of the core design and its influence in the transients’ evolution is described. • The analysis has identified peak values and grace times for the protection system design. - Abstract: The new reactor concepts proposed in the Generation IV International Forum require the development and validation of computational tools able to assess their safety performance. In the first part of this paper the models of the ESFR design developed by several organisations in the framework of the CP-ESFR project were presented and their reliability validated via a benchmarking exercise. This second part of the paper includes the application of those tools for the analysis of design basis accident (DBC) scenarios of the reference design. Further, this paper also introduces the main features of the core optimisation process carried out within the project with the objective to enhance the core safety performance through the reduction of the positive coolant density reactivity effect. The influence of this optimised core design on the reactor safety performance during the previously analysed transients is also discussed. The conclusion provides an overview of the work performed by the partners involved in the project towards the development and enhancement of computational tools specifically tailored to the evaluation of the safety performance of the Generation IV innovative nuclear reactor designs.

  2. Code assessment and modelling for Design Basis Accident analysis of the European Sodium Fast Reactor design. Part II: Optimised core and representative transients analysis

    International Nuclear Information System (INIS)

    Lazaro, A.; Schikorr, M.; Mikityuk, K.; Ammirabile, L.; Bandini, G.; Darmet, G.; Schmitt, D.; Dufour, Ph.; Tosello, A.; Gallego, E.; Jimenez, G.; Bubelis, E.; Ponomarev, A.; Kruessmann, R.; Struwe, D.; Stempniewicz, M.

    2014-01-01

    Highlights: • Benchmarked models have been applied for the analysis of DBA transients of the ESFR design. • Two system codes are able to simulate the behavior of the system beyond sodium boiling. • The optimization of the core design and its influence in the transients’ evolution is described. • The analysis has identified peak values and grace times for the protection system design. - Abstract: The new reactor concepts proposed in the Generation IV International Forum require the development and validation of computational tools able to assess their safety performance. In the first part of this paper the models of the ESFR design developed by several organisations in the framework of the CP-ESFR project were presented and their reliability validated via a benchmarking exercise. This second part of the paper includes the application of those tools for the analysis of design basis accident (DBC) scenarios of the reference design. Further, this paper also introduces the main features of the core optimisation process carried out within the project with the objective to enhance the core safety performance through the reduction of the positive coolant density reactivity effect. The influence of this optimised core design on the reactor safety performance during the previously analysed transients is also discussed. The conclusion provides an overview of the work performed by the partners involved in the project towards the development and enhancement of computational tools specifically tailored to the evaluation of the safety performance of the Generation IV innovative nuclear reactor designs

  3. Modelling job crafting behaviours: Implications for work engagement

    OpenAIRE

    Bakker, Arnold B.; Rodríguez-Muñoz, Alfredo; Sanz Vergel, Ana Isabel

    2016-01-01

    In this study among 206 employees (103 dyads), we followed the job demands–resources approach of job crafting to investigate whether proactively changing one’s work environment influences employee’s (actor’s) own and colleague s (partner’s) work engagement. Using social cognitive theory, we hypothesized that employees would imitate each other’s job crafting behaviours, and therefore influence each other’s work engagement. Results showed that the crafting of social and structural job resources...

  4. 33 CFR 84.24 - High-speed craft.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false High-speed craft. 84.24 Section... RULES ANNEX I: POSITIONING AND TECHNICAL DETAILS OF LIGHTS AND SHAPES § 84.24 High-speed craft. (a) The masthead light of high-speed craft with a length to breadth ratio of less than 3.0 may be placed at a...

  5. Diverse orientations in craft education: Student teachers’ conceptions and perceptions

    Directory of Open Access Journals (Sweden)

    Tarja Kröger

    2016-03-01

    Full Text Available Craft education in Finland has been in a state of change. The concept of a holistic craft process was implemented in the National Core Curriculum in 2004 and the new Curriculum from 2014 strengthened it. Craft and holistic craft is not one unity but includes several orientations. This study aims to research student teachers’ conceptions and perceptions about diverse orientations and the necessity of craft education before they begin their studies in craft pedagogy. Given that the beliefs that student teachers bring to professional learning play a pivotal role in influencing what they can learn from teacher education, they are a subject worthy of investigation. The data consists of on‐line questionnaire answers by student teachers (N=113 at the University of Finland in teacher education in 2014. The on-line questionnaire was answered at the beginning of a basic course in textile craft education at an early stage of their teacher studies. Findings suggest that student teachers conceive of craft education primarily as model-oriented and skill-oriented rather than design-oriented and expression-oriented. Student teachers think that craft education is needed at school, but explanations are not very diverse. The findings of this study can be useful in the process of developing teacher education programmes.

  6. Spectroscopic study of the optical counterpart to the fast X-ray transient IGR J17544-2619 based on observations at the 1.5-m RTT-150 telescope

    Science.gov (United States)

    Bikmaev, I. F.; Nikolaeva, E. A.; Shimansky, V. V.; Galeev, A. I.; Zhuchkov, R. Ya.; Irtuganov, E. N.; Melnikov, S. S.; Sakhibullin, N. A.; Grebenev, S. A.; Sharipova, L. M.

    2017-10-01

    We present the results of our long-term photometric and spectroscopic observations at the Russian-Turkish RTT-150 telescope for the optical counterpart to one of the best-known sources, representatives of the class of fast X-ray transients, IGR J17544-2619. Based on our optical data, we have determined for the first time the orbital and physical parameters of the binary system by the methods of Doppler spectroscopy.We have calculated theoretical spectra of the optical counterpart by applying non- LTE corrections for selected lines and obtained the parameters of the stellar atmosphere ( T eff = 33 000 K, log g = 3.85, R = 9.5 R ⊙, and M = 23 M ⊙). The latter suggest that the optical star is not a supergiant as has been thought previously.

  7. Which employees craft their jobs and how? Basic dimensions of personality and employees' job crafting behaviour

    NARCIS (Netherlands)

    Bipp, T.; Demerouti, E.

    2015-01-01

    The aim of the current research was to examine to what degree basic personality dimensions serve as determinants of job crafting behaviour and to investigate how this behaviour can be influenced via behavioural intentions. In Study 1, we investigated the relationship of approach and avoidance

  8. Sustainable Innovation of Glass Design and Craft

    DEFF Research Database (Denmark)

    Sparre-Petersen, Maria

    2014-01-01

    , reduction of production and transportation of new glass is desirable (Environmental Protection Agency, 2012), and can be realized by recycling glass, that has already been manufactured, used and collected for recycling, but has ended up in landfills due to the market mechanisms that allow manufacturing...... and deposition of glass is reduced Today glass production predominantly consists of window glass, glass wool for insulation and containers such as bottles and jelly jars. Glass craft and design hold only a fraction of the market. Still there is reason to believe that generation and implementation of new...

  9. Crafts and Craft Education as Expressions of Cultural Heritage: Individual Experiences and Collective Values among an International Group of Women University Students

    Science.gov (United States)

    Kokko, Sirpa; Dillon, Patrick

    2011-01-01

    This paper explores relationships between crafts, craft education and cultural heritage as reflected in the individual experiences and collective values of fifteen female university students of different nationalities. The students (all trainee teachers) were following a course in crafts and craft education as part of an International Study…

  10. 33 CFR 149.310 - What are the muster and embarkation requirements for survival craft?

    Science.gov (United States)

    2010-07-01

    ... embarkation requirements for survival craft? 149.310 Section 149.310 Navigation and Navigable Waters COAST... and embarkation requirements for survival craft? Muster and embarkation arrangements for survival craft must comply with 46 CFR 108.540. ...

  11. Transient analyzer

    International Nuclear Information System (INIS)

    Muir, M.D.

    1975-01-01

    The design and design philosophy of a high performance, extremely versatile transient analyzer is described. This sub-system was designed to be controlled through the data acquisition computer system which allows hands off operation. Thus it may be placed on the experiment side of the high voltage safety break between the experimental device and the control room. This analyzer provides control features which are extremely useful for data acquisition from PPPL diagnostics. These include dynamic sample rate changing, which may be intermixed with multiple post trigger operations with variable length blocks using normal, peak to peak or integrate modes. Included in the discussion are general remarks on the advantages of adding intelligence to transient analyzers, a detailed description of the characteristics of the PPPL transient analyzer, a description of the hardware, firmware, control language and operation of the PPPL transient analyzer, and general remarks on future trends in this type of instrumentation both at PPPL and in general

  12. Sarawak Bamboo Craft: Symbolism and Phenomenon

    Directory of Open Access Journals (Sweden)

    Arshad Mohd Zaihidee

    2014-04-01

    Full Text Available The relationship between human beings and their environment has stirred reactions between nature and the development of mind and actions that can be discussed using interdisciplinary approaches such as psychology, sociology, anthropology and history, in understanding human thinking and behavior. A psychological approach is intended to evaluate the individual choices and needs in society. A sociological approach details the various patterns in the social organization. An anthropological approach is tied with culture and belief to fulfil human needs which are based on their habitat, while a historical approach looks at the development which is related to the past. Dimensions of experiences, order and logic, selective elaboration and expressions are used to analyze the bamboo craft of Iban, Melanau and Bidayuh societies in Sarawak long-houses. The existence of constitutive, moral, expressive and cognitive symbols has been interpreted based on a theoretical framework that has been developed by Langer Art Theory, Parsons Social Theory and Kaplan Culture Theory. The values and meaning formed are interpreted to understand matters related to the lives of villagers and the finding suggests that bamboo craft expresses the multi-ethnic mind and character in the socio-culture of long- houses in Sarawak.

  13. Study of sodium boiling during a power transient in a heating duct. Investigation carried out within the scope of a study on the safety of fast neutron reactors

    International Nuclear Information System (INIS)

    Seiler, J.-M.

    1977-01-01

    This work comprises an experimental study and a physical and theoretical interpretation of sodium boiling during a power transient in conditions simulating a power excursion accident in a breeder reactor. The experimental study was performed on an 'out of pile' system with forced sodium convection. It enabled a detailed study to be made of the draining of the heating duct representing a part of a reactor assembly (expansion of the double-phase area on the heating part of the pin). The physical and theoretical interpretation rests on a very simple calculation model solely describing the heat transfers in the duct, assuming that the fluid stays liquid. The extension of the boiling is governed by the initial overheating and the boiling conditioned by thermal inertias of the walls. The extent of the overheating appears to depend on the degree of initial under-saturation. In the absence of overheating, the rate at which the double-phase front moves is controlled by the saturated boiling. This front is well localised when the central temperature gradient is significant. The draining rate is then directly proportional to the growth rate of the temperature in the liquid. The model employed in the CASPAR code for describing power excursion experiments in single liquid phase is described. This code makes it possible to calculate the heat transfers occurring in a forced system by a heating part, a coolant in movement and possibly a part representing an outer cover [fr

  14. Searching the Soul: Veterans and Their Arts and Crafts

    Science.gov (United States)

    Hasio, Cindy

    2011-01-01

    For military veterans suffering from the long-term trauma of warfare, arts and crafts become much more than the fabrication of relics; they can literally save the spirit. Dialogue and interaction between the veterans, volunteers, and staff are crucial to the success of veterans' arts and crafts program. The purpose of this research was threefold.…

  15. Formation control of marine surface craft: a Lagrangian approach

    DEFF Research Database (Denmark)

    Ihle, Ivar-Andre F.; Jouffroy, Jerome; Fossen, Thor I.

    2006-01-01

    This paper presents a method for formation control of marine surface craft inspired by Lagrangian mechanics. The desired formation configuration and response of the marine surface craft are given as a set of constraints in analytical mechanics. Thus, constraints forces arise and feedback from...

  16. Creating Chicago History: Making Outreach Craft Activities Meaningful

    Science.gov (United States)

    Karp, Madeline

    2012-01-01

    When it comes to having a traveling outreach activity for a museum, a craft can seem like the perfect solution. It can seemingly be all things at once--educational, quick and fun. But, if poorly constructed, crafts can also have serious fallbacks. Using the Chicago History Museum and the Millennium Park Family Fun Festival as a case study, this…

  17. Craft Lessons: Teaching Writing K-8. Second Edition

    Science.gov (United States)

    Fletcher, Ralph; Portalupi, JoAnn

    2007-01-01

    Since its publication in 1998 Craft Lessons has become a mainstay of writing teachers, both new and experienced. Practical lessons--each printed on one page--and the instructional language geared to three grade-level groupings: K-2, 3-4, and 5-8 are contained in this book. In the decade since Craft Lessons' publication the world has changed in…

  18. Learning Practices of Femininity through Gendered Craft Education in Finland

    Science.gov (United States)

    Kokko, Sirpa

    2009-01-01

    This paper discusses the processes and practices that link crafts and gender in the upbringing and education of girls. The paper is based on a study conducted among female primary school trainee teachers in Finland. The data are comprised of their experiences with crafts as schoolgirls. The methods of the study were memory work and writing of…

  19. 33 CFR 146.120 - Manning of survival craft.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Manning of survival craft. 146.120 Section 146.120 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY... craft. The owner, the owner's agent, or the person in charge shall assign a person to each life float...

  20. Students' Attitudes towards Craft and Technology in Iceland and Finland

    Science.gov (United States)

    Thorsteinsson, Gísli; Ólafsson, Brynjar; Autio, Ossi

    2012-01-01

    Craft education in both Finland and Iceland originated over 140 years ago and was influenced by the Scandinavian Sloyd pedagogy. Since then, the subject has moved away from craft and towards technology, with the aim being to increase students' technological abilities. In the beginning, the subject largely focused on the students copying artefacts,…

  1. 46 CFR 108.520 - Type of survival craft.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Type of survival craft. 108.520 Section 108.520 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Lifesaving Equipment § 108.520 Type of survival craft. (a) Each lifeboat must be a fire-protected...

  2. Craft-Art as a Basis for Human Activity

    Science.gov (United States)

    Karppinen, Seija

    2008-01-01

    This article based on my doctoral thesis examines the Basic Arts Education system in Finland, focusing on Basic Crafts Education and its description through action concepts. The main task of the study was to create a concept model. In the first part of the study a concept map was created from the practice of Basic Crafts Education. The aim of the…

  3. The comparative risk assessment framework and tools (CRAFT)

    Science.gov (United States)

    Southern Research Station. USDA Forest Service

    2010-01-01

    To help address these challenges, the USDA Forest Service’s Eastern Forest Environmental Threat Assessment Center (EFETAC) and the University of North Carolina Asheville’s National Environmental Modeling and Analysis Center (NEMAC) designed a planning framework, called the Comparative Risk Assessment Framework and Tools (CRAFT). CRAFT is...

  4. Craft Training in Russia: Theory and Practice of Development

    Science.gov (United States)

    Romantsev, Gennadij M.; Efanov, Andrei V.; Moiseev, Andrei V.; Bychkova, Ekaterina Yu.; Karpova, Natalia P.; Tidemann, Bruno

    2016-01-01

    The relevance of the research topic is substantiated by the social commitment to the establishment of a system of craft training focused on training personnel for craft enterprises. The purpose of the article is to provide theoretical and methodological substantiation of the necessity to provide organizational and pedagogical foundations for the…

  5. Charge deep level transient spectroscopy study of 3 - 7 MeV/amu ion and fast neutron irradiation-induced changes in MOS structures

    International Nuclear Information System (INIS)

    Stano, J.; Skuratov, V.A.; Ziska, M.

    2001-01-01

    Radiation-induced changes in MOS capacitor structures irradiated with Bi (710 MeV), Kr (245 MeV), Ar (280, 155 MeV) ions and fast neutrons (E > 0.1 MeV) have been studied in view of Q-DLTS and C-V techniques. As was found, high energy ion and neutron irradiation enhance the induction of positive charge density in the oxide layer of MOS samples. The number of electrically active defects in this layer strongly decreases under dense electronic excitations. No dependence of vacancy-oxygen center concentration in silicon substrate normalized per number of displaced atoms by nuclear elastic collisions on projectile type have been observed

  6. Empowering leadership and job crafting: The role of employee optimism.

    Science.gov (United States)

    Thun, Sylvi; Bakker, Arnold B

    2018-06-08

    The objective of this study was to test the relationship between empowering leadership and job crafting and to examine the moderating role of optimism as a personal resource. We hypothesized that the association between empowering leadership and job crafting would be stronger for employees with high (vs. low) levels of optimism. A total of 331 Norwegian workers from a variety of occupations participated in our study. Results of structural equation modelling analysis generally supported our hypotheses. Empowering leadership was positively related to 3 of the 4 job crafting strategies investigated (increasing structural job resources, increasing social job resources, and increasing challenging job demands; but not reducing hindrance job demands). Moreover, as hypothesized, optimism strengthened the empowering leadership-job crafting relationship for increasing structural resources and increasing challenging demands. The results suggest that empowering leadership is an important antecedent of job crafting strategies, except for reducing hindrance demands. The implications of these findings are discussed. Copyright © 2018 John Wiley & Sons, Ltd.

  7. Employees’ perceived opportunities to craft and in-role performance : The mediating role of job crafting and work engagement

    NARCIS (Netherlands)

    Van Wingerden, Jessica; Poell, R.F.

    2017-01-01

    The present study was designed to gain knowledge of the relationship between employees' perceived opportunities to craft, their actual job crafting behavior and, in line with JD-R theory, subsequently their work engagement and performance. Although scholars have suggested that employees' perceived

  8. Job crafting: Towards a new model of individual job redesign

    Directory of Open Access Journals (Sweden)

    Maria Tims

    2010-12-01

    Research purpose: The purpose of the study was to fit job crafting in job design theory. Motivation for the study: The study was an attempt to shed more light on the types of proactive behaviours of individual employees at work. Moreover, we explored the concept of job crafting and its antecedents and consequences. Research design, approach and method: A literature study was conducted in which the focus was first on proactive behaviour of the employee and then on job crafting. Main findings: Job crafting can be seen as a specific form of proactive behaviour in which the employee initiates changes in the level of job demands and job resources. Job crafting may be facilitated by job and individual characteristics and may enable employees to fit their jobs to their personal knowledge, skills and abilities on the one hand and to their preferences and needs on the other hand. Practical/managerial implications: Job crafting may be a good way for employees to improve their work motivation and other positive work outcomes. Employees could be encouraged to exert more influence on their job characteristics. Contribution/value-add: This article describes a relatively new perspective on active job redesign by the individual, called job crafting, which has important implications for job design theories.

  9. Guides crafting meaning and identity in a flexible working life

    DEFF Research Database (Denmark)

    Meged, Jane Widtfeldt

    2017-01-01

    and adding a critical perspective, we understand the guides’ agency, and how they craft scope, tasks and relations in order to sustain a positive self-image and a meaningful working life. Comparing certified guides’ job-crafting practices, we learn that guides are alike across the three countries......Certified guides are exemplary, well-educated, self-employed, casual labourers in a liberal and competitive job market. Applying grounded theory, this exploratory study builds on in-depth qualitative interviews with Danish, Italian and French certified guides. Informed by the theory of job crafting...

  10. 47 CFR 80.223 - Special requirements for survival craft stations.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Special requirements for survival craft... requirements for survival craft stations. (a) Survival craft stations capable of transmitting on: (1) 2182 kHz... operate with A3E or A3N emission. (b) Survival craft stations must be able to receive the frequency and...

  11. 46 CFR 117.205 - Survival craft-vessels operating on limited coastwise routes.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Survival craft-vessels operating on limited coastwise... PASSENGERS LIFESAVING EQUIPMENT AND ARRANGEMENTS Number and Type of Survival Craft § 117.205 Survival craft... the survival craft required by §§ 117.204 (a) through (d) of this part, as applicable. (b) Each vessel...

  12. 46 CFR 111.75-16 - Lighting of survival craft and rescue boats.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Lighting of survival craft and rescue boats. 111.75-16... craft and rescue boats. (a) During preparation, launching, and recovery, each survival craft and rescue... of circuits must be such that the lighting for adjacent launching stations for survival craft or...

  13. 46 CFR 108.540 - Survival craft muster and embarkation arrangements.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Survival craft muster and embarkation arrangements. 108... OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Lifesaving Equipment § 108.540 Survival craft muster and... craft muster station and embarkation station for a survival craft which is boarded before it is launched...

  14. 46 CFR 117.204 - Survival craft-vessels operating on coastwise routes.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Survival craft-vessels operating on coastwise routes... PASSENGERS LIFESAVING EQUIPMENT AND ARRANGEMENTS Number and Type of Survival Craft § 117.204 Survival craft... allowed, the following survival craft requirements apply when not engaged in an overnight voyage: (1...

  15. 46 CFR 117.206 - Survival craft-vessels operating on Great Lakes routes.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Survival craft-vessels operating on Great Lakes routes... PASSENGERS LIFESAVING EQUIPMENT AND ARRANGEMENTS Number and Type of Survival Craft § 117.206 Survival craft... vessel certificated to operate on a Great Lakes route must be provided with the survival craft required...

  16. Major factors influencing craft productivity in nuclear power plant construction

    International Nuclear Information System (INIS)

    Borcherding, J.D.; Sebastian, S.J.

    1980-01-01

    This paper reports on a research study whose objective was to determine the most influential factors adversely affecting craft productivity in nuclear power plant construction from the perspective of the tradesmen employed at the sites. Data were collected through the use of a questionnaire survey and group interview sessions, predominantly with workmen, at six nuclear power plant construction projects. Craftsmen were chosen as the major data base because of their awareness of how their time would actually be spent on the project. Topics considered include the factors influencing craft productivity, material availability, redoing work, crew interfacing, overcrowded work areas, instruction time, inspection delays, craft turnover, craft absenteeism, foreman changes, foreman incompetence, engineering design lead time, comprehensive scheduling of the design function, the responsibility of the utility, value engineering, plant standardization, the effective utilization of the planning and scheduling system, and the labor-management committee

  17. Construction and Validation of the Perceived Opportunity to Craft Scale.

    Science.gov (United States)

    van Wingerden, Jessica; Niks, Irene M W

    2017-01-01

    We developed and validated a scale to measure employees' perceived opportunity to craft (POC) in two separate studies conducted in the Netherlands (total N = 2329). POC is defined as employees' perception of their opportunity to craft their job. In Study 1, the perceived opportunity to craft scale (POCS) was developed and tested for its factor structure and reliability in an explorative way. Study 2 consisted of confirmatory analyses of the factor structure and reliability of the scale as well as examination of the discriminant and criterion-related validity of the POCS. The results indicated that the scale consists of one dimension and could be reliably measured with five items. Evidence was found for the discriminant validity of the POCS. The scale also showed criterion-related validity when correlated with job crafting (+), job resources (autonomy +; opportunities for professional development +), work engagement (+), and the inactive construct cynicism (-). We discuss the implications of these findings for theory and practice.

  18. Integrated Design of Semi-Displacement Patrol Crafts

    National Research Council Canada - National Science Library

    Gillespy, Andrew J

    2008-01-01

    ... of any one change on the entire system. The initial design of smaller patrol craft is especially difficult due to the lack of design tools able to deal with ships of small size operating in the semi-planing region...

  19. The Computer and the Writer's Craft: Implications for Teachers.

    Science.gov (United States)

    Brockmann, R. John; McCauley, Rebecca J.

    1984-01-01

    Examines how computers as a medium for communication affect the craft of writing, and subsequently affect teaching approaches. Discusses the need for teaching online document design and problem-solving processes as they relate to the communication process. (HTH)

  20. Constructing knowledge through perceptual processes in making craft-art

    Directory of Open Access Journals (Sweden)

    Milla Ojala

    2013-10-01

    Full Text Available The focus of the study is on the knowledge that is constructed through perceptual processes during craft making in the context of the Finnish Basic Education in the Arts (BEA system. Craft studies in the BEA are defined as craft-art. The research method used is the grounded theory. The data consists of seven interviews and participant observations. Participants in the study are adolescents who study craft-art in the BEA system in Visual Art School, Aimo in Hämeenlinna. The aim of the article is to present, define and reflect on the concepts, properties and dimensions concerning perceptual processes that are discovered in this stage of the study following grounded theory procedures. The perceptual processes are an essential means of constructing knowledge in craft-art. Consequently, one aim of the study is to discuss how these processes are connected to various types of knowledge. The perceptual processes are described by seven concepts: imitative, anticipative, evaluative, experimental, emotional, temporal and bodily perceptions. They indicate on a conceptual level the characteristic of knowledge constructed through perceptual processes in craft-art. Further, theconcepts have several properties that can vary dimensionally between two qualities. The properties are activity, function and position. The dimensions of the properties vary from active to passive, formal to informal and internal to external. In conclusion, the concepts can describe a large range of incidents in different situations. They also seem to describe well the practice of  craft-art and there are several connections with pre-existing concepts of knowledge.Keywords: Craft, Knowledge, Perceptual process, Basic Education in the Arts, Grounded Theory 

  1. Craft's brand equity in CZ, focusing on canoeing

    OpenAIRE

    Šťastný, Šimon

    2013-01-01

    Title: Craft's brand equity in CZ, focusing on flat water canoeing. Objectives: The objective of this dissertation is to find out what is the Craft's brand equity and to suggest how to improve it on the Czech market. That would be based on marketing research and supplementary interview. I will be using marketing research and supplementary interview. Methods: In this dissertation the method of electronic questioning was used. The questionnaires were sent by email address after first contact on...

  2. Minimum Plate Thickness in High-Speed Craft

    DEFF Research Database (Denmark)

    Pedersen, Preben Terndrup; Zhang, Shengming

    1998-01-01

    The minimum plate thickness requirements specified by the classification societies for high-speed craft are supposed to ensure adequate resistance to impact loads such as collision with floating objects and objects falling on the deck. The paper presents analytical methods of describing such impact...... phenomena and proposes performance requirements instead of thickness requirements for hull panels in high-speed craft made of different building materials....

  3. Detail in architecture: Between arts & crafts

    Science.gov (United States)

    Dulencin, Juraj

    2016-06-01

    Architectural detail represents an important part of architecture. Not only can it be used as an identifier of a specific building but at the same time enhances the experience of the realized project. Within it lie the signs of a great architect and clues to understanding his or her way of thinking. It is therefore the central topic of a seminar offered to architecture students at the Brno University of Technology. During the course of the semester-long class the students acquaint themselves with atypical architectural details of domestic and international architects by learning to read them, understand them and subsequently draw them by creating architectural blueprints. In other words, by general analysis of a detail the students learn theoretical thinking of its architect who, depending on the nature of the design, had to incorporate a variety of techniques and crafts. Students apply this analytical part to their own architectural detail design. The methodology of the seminar consists of experiential learning by project management and is complemented by a series of lectures discussing a diversity of details as well as materials and technologies required to implement it. The architectural detail design is also part of students' bachelors thesis, therefore, the realistic nature of their blueprints can be verified in the production process of its physical counterpart. Based on their own documentation the students choose the most suitable manufacturing process whether it is supplied by a specific technology or a craftsman. Students actively participate in the production and correct their design proposals in real scale with the actual material. A student, as a future architect, stands somewhere between a client and an artisan, materializes his or her idea and adjusts the manufacturing process so that the final detail fulfills aesthetic consistency and is in harmony with its initial concept. One of the very important aspects of the design is its economic cost, an

  4. Experimental Investigation of a Wing-in-Ground Effect Craft

    Directory of Open Access Journals (Sweden)

    M. Mobassher Tofa

    2014-01-01

    Full Text Available The aerodynamic characteristics of the wing-in-ground effect (WIG craft model that has a noble configuration of a compound wing was experimentally investigated and Universiti Teknologi Malaysia (UTM wind tunnel with and without endplates. Lift and drag forces, pitching moment coefficients, and the centre of pressure were measured with respect to the ground clearance and the wing angle of attack. The ground effect and the existence of the endplates increase the wing lift-to-drag ratio at low ground clearance. The results of this research work show new proposed design of the WIG craft with compound wing and endplates, which can clearly increase the aerodynamic efficiency without compromising the longitudinal stability. The use of WIG craft is representing an ambitious technology that will help in reducing time, effort, and money of the conventional marine transportation in the future.

  5. Experimental investigation of a wing-in-ground effect craft.

    Science.gov (United States)

    Tofa, M Mobassher; Maimun, Adi; Ahmed, Yasser M; Jamei, Saeed; Priyanto, Agoes; Rahimuddin

    2014-01-01

    The aerodynamic characteristics of the wing-in-ground effect (WIG) craft model that has a noble configuration of a compound wing was experimentally investigated and Universiti Teknologi Malaysia (UTM) wind tunnel with and without endplates. Lift and drag forces, pitching moment coefficients, and the centre of pressure were measured with respect to the ground clearance and the wing angle of attack. The ground effect and the existence of the endplates increase the wing lift-to-drag ratio at low ground clearance. The results of this research work show new proposed design of the WIG craft with compound wing and endplates, which can clearly increase the aerodynamic efficiency without compromising the longitudinal stability. The use of WIG craft is representing an ambitious technology that will help in reducing time, effort, and money of the conventional marine transportation in the future.

  6. Classification of Intact Stability Standards for Dynamically Supported Craft.

    Science.gov (United States)

    1979-10-01

    introduced (by the U.S. Navy) in the late 1950’s. Both military and commercial applications of this type have since proved very successful . From the... successful and safe planing craft have been built for military, commercial and private use. The stability of planing craft, however, is an extremely...forlces. Broaching- [ n I, 111, I ikeA LL) tOCCUr in suvvre following seas, when the Cr aft runs do L tht ! act of ort wav docd slope- ts bovw Ma’ thes

  7. Formation control of surface marine craft using Lagrange multipliers

    DEFF Research Database (Denmark)

    Ihle, Ivar-Andre F.; Jouffroy, Jerome; Fossen, Thor I.

    We propose a method for constructing control laws for formation control of marine craft using classical tools from analytical mechanics. The control law is based on applying inter-vessel constraint functions which again impose forces on the individual vessels that maintain the given constraints...... on the total system. In this way, a formation can be assembled and stay together when exposed to external forces. A brief comparison with other control designs for a group of marine craft is done. Further, control laws for formation assembling (with dynamic positioning), and formation keeping during...

  8. HEDL experimental transient overpower program

    International Nuclear Information System (INIS)

    Hikido, T.; Culley, G.E.

    1976-01-01

    HEDL is conducting a series of experiments to evaluate the performance of Fast Flux Test Facility (FFTF) prototypic fuel pins up to the point of cladding breach. A primary objective of the program is to demonstrate the adequacy of fuel pin and Plant Protective System (PPS) designs for terminated transients. Transient tests of prototypic FFTF fuel pins previously irradiated in the Experimental Breeder Reactor-II (EBR-II) have demonstrated the adequacy of the PPS and fuel pin designs and indicate that a very substantial margin exists between PPS-terminated transients and that required to produce fuel pin cladding failure. Additional experiments are planned to extend the data base to high burnup, high fluence fuel pin specimens

  9. Transformational leadership, adaptability, and job crafting : the moderating role of organizational identification.

    NARCIS (Netherlands)

    Wang, H.; Demerouti, E.; Le Blanc, P.M.

    In this study, we aim to explore the link between transformational leadership and job crafting. We predict that transformational leadership will stimulate employee job crafting (seeking resources, seeking challenges, and reducing demands) by increasing their adaptability; but that transformational

  10. Marian Roberts, Developing the Craft of Mediation: Reflections on Theory and Practice

    Directory of Open Access Journals (Sweden)

    Ghislaine M. Lanteigne

    2008-10-01

    Full Text Available In Developing the Craft of Mediation, Marian Roberts proposes that mediation is akin to a craft with its focus on learning from experience and from others working in the field to develop and master knowledge and skills.

  11. Job crafting, work engagement, and psychological distress among Japanese employees: a cross-sectional study

    OpenAIRE

    Sakuraya, Asuka; Shimazu, Akihito; Eguchi, Hisashi; Kamiyama, Kimika; Hara, Yujiro; Namba, Katsuyuki; Kawakami, Norito

    2017-01-01

    Background Job crafting, an employee-initiated job design/redesign, has become important for employees? well-being. However, most studies on the relationship between job crafting and employees? well-being have been conducted in western countries; thus, it is unclear whether job crafting can be effectively applied to Asian cultures, such as Japan, which emphasizes group harmony. The aim of this study was to examine the cross-sectional associations of self-reported job crafting with work engage...

  12. Design Method for Contra-Rotating Propellers for High-Speed Crafts: Revising the Original Lerbs Theory in a Modern Perspective

    Directory of Open Access Journals (Sweden)

    Stefano Brizzolara

    2012-01-01

    Full Text Available The main theoretical and numerical aspects of a design method for optimum contrar-rotating (CR propellers for fast marine crafts are presented. We propose a reformulated version of a well-known design theory for contra-rotating propellers, by taking advantage of a new fully numerical algorithm for the calculation of the mutually induced velocities and introducing new features such as numerical lifting surface corrections, use of an integrated modern cavitation/strength criteria, a modified method to consider different numbers of blades among the two propellers, and to allow for an unloading function in the search for the optimal circulation distribution. The paper first introduces the main theoretical principles of the new methods and then discusses the influence of the main design parameters on an emblematic example of application in the case of counter rotating propellers for a pod propulsor designed for fast planing crafts (35 knots and above.

  13. Malleable Thought: The Role of Craft Thinking in Practice-Led Graphic Design

    Science.gov (United States)

    Ings, Welby

    2015-01-01

    This article considers the potential of craft processes as creative engagements in graphic design research. It initially discusses the uneasy history of craft within the discipline, then draws upon case studies undertaken by three established designers who, in their postgraduate theses, engaged with craft as a process of thinking. In doing so, the…

  14. 46 CFR 199.220 - Survival craft and rescue boat embarkation arrangements.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Survival craft and rescue boat embarkation arrangements... APPLIANCES AND ARRANGEMENTS LIFESAVING SYSTEMS FOR CERTAIN INSPECTED VESSELS Additional Requirements for Passenger Vessels § 199.220 Survival craft and rescue boat embarkation arrangements. (a) Survival craft...

  15. 46 CFR 199.175 - Survival craft and rescue boat equipment.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Survival craft and rescue boat equipment. 199.175....175 Survival craft and rescue boat equipment. (a) All lifeboat and rescue boat equipment— (1) Must be... craft or rescue boat; or (iii) Overload the launching appliance. (b) Each lifeboat, rigid liferaft, and...

  16. 47 CFR 80.271 - Technical requirements for portable survival craft radiotelephone transceivers.

    Science.gov (United States)

    2010-10-01

    ... craft radiotelephone transceivers. 80.271 Section 80.271 Telecommunication FEDERAL COMMUNICATIONS... Authorization for Compulsory Ships § 80.271 Technical requirements for portable survival craft radiotelephone transceivers. (a) Portable survival craft radiotelephone transceivers must comply with the following: (1) The...

  17. 46 CFR 199.110 - Survival craft muster and embarkation arrangements.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Survival craft muster and embarkation arrangements. 199... § 199.110 Survival craft muster and embarkation arrangements. (a) Each muster station must have... emergency source of electrical power. (e) Each davit-launched and free-fall survival craft muster station...

  18. 33 CFR 149.313 - How must survival craft be arranged?

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false How must survival craft be... Equipment Manned Deepwater Port Requirements § 149.313 How must survival craft be arranged? The operator must arrange survival craft so that they meet the requirements of 46 CFR 108.525 (a) and § 108.530 and...

  19. 46 CFR 108.550 - Survival craft launching and recovery arrangements: General.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Survival craft launching and recovery arrangements...-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Lifesaving Equipment § 108.550 Survival craft.... (c) Each survival craft must be arranged to clear each leg, column, footing, brace, mat, and each...

  20. 46 CFR 180.206 - Survival craft-vessels operating on Great Lakes routes.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Survival craft-vessels operating on Great Lakes routes... Craft § 180.206 Survival craft—vessels operating on Great Lakes routes. (a) Except as allowed by... with the survival craft required by § 180.205 (a) through (e), as appropriate. (b) Each vessel...

  1. 46 CFR 199.150 - Survival craft launching and recovery arrangements; general.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Survival craft launching and recovery arrangements... Vessels § 199.150 Survival craft launching and recovery arrangements; general. (a)(1) Each launching...) Unless expressly provided otherwise in this part, each survival craft must be provided with a launching...

  2. 26 CFR 1.861-16 - Income from certain craft first leased after December 28, 1980.

    Science.gov (United States)

    2010-04-01

    ... 26 Internal Revenue 9 2010-04-01 2010-04-01 false Income from certain craft first leased after... the United States § 1.861-16 Income from certain craft first leased after December 28, 1980. (a) General rule. If a taxpayer— (1) Owns a qualified craft (as defined in paragraph (b) of this section). (2...

  3. 76 FR 38153 - California State Nonroad Engine Pollution Control Standards; Commercial Harbor Craft Regulations...

    Science.gov (United States)

    2011-06-29

    ... Standards; Commercial Harbor Craft Regulations; Opportunity for Public Hearing and Comment AGENCY... engines on commercial harbor craft. CARB has requested that EPA issue a new authorization under [email protected] . SUPPLEMENTARY INFORMATION: I. California's Commercial Harbor Craft Regulations In a...

  4. 46 CFR 133.110 - Survival craft muster and embarkation arrangements.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Survival craft muster and embarkation arrangements. 133... VESSELS LIFESAVING SYSTEMS Requirements for All OSVs § 133.110 Survival craft muster and embarkation... lighting supplied from the emergency source of electrical power. (e) Each davit-launched survival craft...

  5. 46 CFR 109.323 - Manning of survival craft and supervision.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Manning of survival craft and supervision. 109.323... DRILLING UNITS OPERATIONS Operation and Stowage of Safety Equipment § 109.323 Manning of survival craft and supervision. (a) There must be a sufficient number of trained persons on board the survival craft for...

  6. 46 CFR 180.205 - Survival craft-vessels operating on limited coastwise routes.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Survival craft-vessels operating on limited coastwise... Craft § 180.205 Survival craft—vessels operating on limited coastwise routes. (a) Except as allowed by... survival craft required by § 180.204(d). (e) Each vessel certificated to operate on a limited coastwise...

  7. 33 CFR 149.305 - What are the survival craft requirements for temporary personnel?

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false What are the survival craft... EQUIPMENT Lifesaving Equipment Manned Deepwater Port Requirements § 149.305 What are the survival craft... complement exceeds the capacity of the survival craft required under § 149.304 of this subpart, the port must...

  8. 46 CFR 199.100 - Manning of survival craft and supervision.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Manning of survival craft and supervision. 199.100....100 Manning of survival craft and supervision. (a) There must be a sufficient number of trained... craft and launching arrangements required for abandonment by the total number of persons on board. (c...

  9. 46 CFR 199.245 - Survival craft embarkation and launching arrangements.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Survival craft embarkation and launching arrangements... Passenger Vessels § 199.245 Survival craft embarkation and launching arrangements. (a) Each davit-launched liferaft must be arranged to be rapidly boarded by its full complement of persons. (b) All survival craft...

  10. 46 CFR 199.280 - Survival craft embarkation and launching arrangements.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Survival craft embarkation and launching arrangements... Cargo Vessels § 199.280 Survival craft embarkation and launching arrangements. (a) Each lifeboat must be.... (d) All survival craft required for abandonment by the total number of persons on board must be...

  11. 46 CFR 133.150 - Survival craft launching and recovery arrangements: General.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Survival craft launching and recovery arrangements...) OFFSHORE SUPPLY VESSELS LIFESAVING SYSTEMS Requirements for All OSVs § 133.150 Survival craft launching and recovery arrangements: General. (a) All survival craft required for abandonment by the total number of...

  12. 46 CFR 180.207 - Survival craft-vessels operating on lakes, bays, and sounds routes.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Survival craft-vessels operating on lakes, bays, and... Survival Craft § 180.207 Survival craft—vessels operating on lakes, bays, and sounds routes. (a) Except as... warm water is not required to carry survival craft. (d) A vessel certificated to operate on lakes, bays...

  13. 46 CFR 117.202 - Survival craft-vessels operating on oceans routes.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Survival craft-vessels operating on oceans routes. 117... LIFESAVING EQUIPMENT AND ARRANGEMENTS Number and Type of Survival Craft § 117.202 Survival craft—vessels... number of overnight persons allowed, the survival craft requirements contained in paragraph (e) of this...

  14. 46 CFR 117.208 - Survival craft-vessels operating on rivers routes.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Survival craft-vessels operating on rivers routes. 117... LIFESAVING EQUIPMENT AND ARRANGEMENTS Number and Type of Survival Craft § 117.208 Survival craft—vessels... vessel certificated to operate on a rivers route in warm water is not required to carry survival craft...

  15. Valuing Craftsmanship: In particular the crafting of Chinese porcelain and Dutch Delft Blue

    NARCIS (Netherlands)

    L. Jiang (Lili)

    2018-01-01

    markdownabstract“How important are crafts for a society?” When a conventional economist gets the question, the answer is most likely about the prices of craft products, the income of craftspeople, and the contribution that the crafts sector makes to GDP. This thesis gives another answer. Applying

  16. Transient pseudohypoaldosteronism

    Directory of Open Access Journals (Sweden)

    Stajić Nataša

    2011-01-01

    Full Text Available Introduction. Infants with urinary tract malformations (UTM presenting with urinary tract infection (UTI are prone to develop transient type 1 pseudohypoaldosteronism (THPA1. Objective. Report on patient series with characteristics of THPA1, UTM and/or UTI and suggestions for the diagnosis and therapy. Methods. Patients underwent blood and urine electrolyte and acid-base analysis, serum aldosterosterone levels and plasma rennin activity measuring; urinalysis, urinoculture and renal ultrasound were done and medical and/or surgical therapy was instituted. Results. Hyponatraemia (120.9±5.8 mmol/L, hyperkalaemia (6.9±0.9 mmol/L, metabolic acidosis (plasma bicarbonate, 11±1.4 mmol/L, and a rise in serum creatinine levels (145±101 μmol/L were associated with inappropriately high urinary sodium (51.3±17.5 mmol/L and low potassium (14.1±5.9 mmol/L excretion. Elevated plasma aldosterone concentrations (170.4±100.5 ng/dL and the very high levels of the plasma aldosterone to potassium ratio (25.2±15.6 together with diminished urinary K/Na values (0.31±0.19 indicated tubular resistance to aldosterone. After institution of appropriate medical and/or surgical therapy, serum electrolytes, creatinine, and acid-base balance were normalized. Imaging studies showed ureteropyelic or ureterovesical junction obstruction in 3 and 2 patients, respectively, posterior urethral valves in 3, and normal UT in 1 patient. According to our knowledge, this is the first report on THPA1 in the Serbian literature. Conclusion. Male infants with hyponatraemia, hyperkalaemia and metabolic acidosis have to have their urine examined and the renal ultrasound has to be done in order to avoid both, the underdiagnosis of THPA1 and the inappropriate medication.

  17. D Digital Simulation of Minnan Temple Architecture CAISSON'S Craft Techniques

    Science.gov (United States)

    Lin, Y. C.; Wu, T. C.; Hsu, M. F.

    2013-07-01

    Caisson is one of the important representations of the Minnan (southern Fujian) temple architecture craft techniques and decorative aesthetics. The special component design and group building method present the architectural thinking and personal characteristics of great carpenters of Minnan temple architecture. In late Qing Dynasty, the appearance and style of caissons of famous temples in Taiwan apparently presented the building techniques of the great carpenters. However, as the years went by, the caisson design and craft techniques were not fully inherited, which has been a great loss of cultural assets. Accordingly, with the caisson of Fulong temple, a work by the well-known great carpenter in Tainan as an example, this study obtained the thinking principles of the original design and the design method at initial period of construction through interview records and the step of redrawing the "Tng-Ko" (traditional design, stakeout and construction tool). We obtained the 3D point cloud model of the caisson of Fulong temple using 3D laser scanning technology, and established the 3D digital model of each component of the caisson. Based on the caisson component procedure obtained from interview records, this study conducted the digital simulation of the caisson component to completely recode and present the caisson design, construction and completion procedure. This model of preserving the craft techniques for Minnan temple caisson by using digital technology makes specific contribution to the heritage of the craft techniques while providing an important reference for the digital preservation of human cultural assets.

  18. Productive and counterproductive job crafting: A daily diary study.

    Science.gov (United States)

    Demerouti, Evangelia; Bakker, Arnold B; Halbesleben, Jonathon R B

    2015-10-01

    The present study aims to uncover the way daily job crafting influences daily job performance (i.e., task performance, altruism, and counterproductive work behavior). Job crafting was conceptualized as "seeking resources," "seeking challenges," and "reducing demands" and viewed as strategies individuals use to optimize their job characteristics. We hypothesized that daily job crafting relates to daily job demands and resources (work pressure and autonomy), which consequently relate to daily work engagement and exhaustion and ultimately to job performance. A sample of 95 employees filled in a quantitative diary for 5 consecutive working days (n occasions = 475). We predicted and found that daily seeking resources was positively associated with daily task performance because daily autonomy and work engagement increased. In contrast, daily reducing demands was detrimental for daily task performance and altruism, because employees lower their daily workload and consequently their engagement and exhaustion, respectively. Only daily seeking challenges was positively (rather than negatively) associated with daily counterproductive behavior. We conclude that employee job crafting can have both beneficial and detrimental effects on job performance. (c) 2015 APA, all rights reserved).

  19. Ghanaian Craft Exporters in the Global Market: Binding and Missing ...

    African Journals Online (AJOL)

    Agribotix GCS 068

    The paper explored the benefits that accrue to Ghanaian craft exporters from subcontracting ties .... viewed as important channels for providing effective and cheaper bases for economic development ... member negatively affect the reputation and cohesion of the group and therefore ...... Unpublished PhD Thesis, University.

  20. Effectiveness of a Volunteer-Led Crafts Group Intervention amongst ...

    African Journals Online (AJOL)

    The purpose of this study was to determine the effectiveness of a volunteer led crafts group intervention (VLCG) as an adjunct to antidepressant medication on mild to moderately depressed women. A quasi-experimental, non-equivalent, control group study was conducted in an urban, psychiatric clinic. Depression was ...

  1. Artisans, Architects, and Apprentices: Valuing the Craft of Teacher Education

    Science.gov (United States)

    Boyd Potter, Rachel

    2016-01-01

    In this article, Boyd Potter describes teacher education faculty as both artisans and architects. As artisans, it is not only their products that enrich us; it is the art of the craft itself that shapes their work. An artisan is valued for the creative endeavor, and not solely the masterpiece. Preparing a quality teacher is not easy work, while…

  2. Bottom Raking Damage to High-Speed Craft

    DEFF Research Database (Denmark)

    Simonsen, Bo Cerup

    1998-01-01

    This paper presents a comparative study of the raking damage to high speed craft (HSC) and conventional ships. The analysis is based on a detailed theoretical model for the raking resistance of an assembled ship bottom structure and on the idea that the impact conditions for various ship types have...

  3. Classroom Teachers' Craft Knowledge of Their Inclusive Practice

    Science.gov (United States)

    Black-Hawkins, Kristine; Florian, Lani

    2012-01-01

    Whilst recent decades have seen significant progress in research on inclusive education, many teachers still feel that the research literature does not fully address their professional concerns about how to enact a policy of inclusion in their classrooms. To help to bridge this gap, we drew on the concept of craft knowledge to undertake a detailed…

  4. Arts, Crafts and Indigenous Industries in Nigeria | Yakubu | Journal ...

    African Journals Online (AJOL)

    The paper is illustrative of the cultural wealth of Nigeria in terms of arts and crafts. It provides a descriptive picture of the various characteristics of the genres in the past and present and in traditional as well as modern Nigerian communities. It functions within religious, intellectual, and socio-economic contexts. Hence ...

  5. Ghanaian Craft Exporters in the Global Market: Binding and Missing ...

    African Journals Online (AJOL)

    The strong positions of buyers and export agents in the craft value chain enable them to apply sanctions to extract compliance from the exporters whereas the weak position of the export vendors implies the lack of sanctioning authority over the rogue artisan subcontractors. The government's promotion programmes could ...

  6. Conceptualizing responsible innovation in craft villages in Vietnam

    NARCIS (Netherlands)

    Voeten, J.; de Haan, J.A.C.; Roome, N.; de Groot, G.A.; Nguyen Thi, Huong; van den Hoven, J.; Doorn, N.; Swierstra, T.; Koops, B.-J.; Romijn, H.

    2014-01-01

    Previous research by the authors has explored small-scale innovations in poor craft producers’ clusters in villages in the Red River Delta in northern Vietnam. Although these innovations resulted in value creation and increased incomes, they also often gave rise to negative environmental or social

  7. Transferring PSM craft skills in a 2 hour session

    NARCIS (Netherlands)

    Zijderveld, E.J.A. van; Morill, N.; Shaw, D.; Belton, V.; Harvey, P.; Rouwette, E.

    2007-01-01

    Many of those involved in the Problem Structuring Methods (PSM) community have commented on the struggle that novices face in building the craft skills associated with conducting a PSM intervention. As part of this year's Operational Research Society Conference, we have three 2-hour practical

  8. Beyond Talent: John Irving and the Passionate Craft of Creativity.

    Science.gov (United States)

    Amabile, Teresa M.

    2001-01-01

    Uses the thoughts and work of novelist John Irving to illustrate the prominence of non-talent components in the componential model of creativity, explaining that raw talent, clever imagination, and a creative personality are insufficient to ensure creative success and that hard work and love of a craft (intrinsic motivation) are at least as…

  9. Reading the Writer's Craft: The Hemingway Short Stories

    Science.gov (United States)

    Garrigues, Lisa

    2004-01-01

    The high school students who spent five weeks studying the style and craft of Ernest Hemingway experienced the power and plus points of apprenticeships. Several assignments that helped the high school juniors to analyze Hemingway's work on short stories and learn from this master craftsman are presented.

  10. Robust formation control of marine surface craft using Lagrange multipliers

    DEFF Research Database (Denmark)

    Ihle, Ivar-Andre F.; Jouffroy, Jerome; Fossen, Thor I.

    2006-01-01

    This paper presents a formation modelling scheme based on a set of inter-body constraint functions and Lagrangian multipliers. Formation control for a °eet of marine craft is achieved by stabilizing the auxiliary constraints such that the desired formation con¯guration appears. In the proposed fr...

  11. Chernobyl reactor transient simulation study

    International Nuclear Information System (INIS)

    Gaber, F.A.; El Messiry, A.M.

    1988-01-01

    This paper deals with the Chernobyl nuclear power station transient simulation study. The Chernobyl (RBMK) reactor is a graphite moderated pressure tube type reactor. It is cooled by circulating light water that boils in the upper parts of vertical pressure tubes to produce steam. At equilibrium fuel irradiation, the RBMK reactor has a positive void reactivity coefficient. However, the fuel temperature coefficient is negative and the net effect of a power change depends upon the power level. Under normal operating conditions the net effect (power coefficient) is negative at full power and becomes positive under certain transient conditions. A series of dynamic performance transient analysis for RBMK reactor, pressurized water reactor (PWR) and fast breeder reactor (FBR) have been performed using digital simulator codes, the purpose of this transient study is to show that an accident of Chernobyl's severity does not occur in PWR or FBR nuclear power reactors. This appears from the study of the inherent, stability of RBMK, PWR and FBR under certain transient conditions. This inherent stability is related to the effect of the feed back reactivity. The power distribution stability in the graphite RBMK reactor is difficult to maintain throughout its entire life, so the reactor has an inherent instability. PWR has larger negative temperature coefficient of reactivity, therefore, the PWR by itself has a large amount of natural stability, so PWR is inherently safe. FBR has positive sodium expansion coefficient, therefore it has insufficient stability it has been concluded that PWR has safe operation than FBR and RBMK reactors

  12. The Validity of the School Assessment in the Craft Subject

    Directory of Open Access Journals (Sweden)

    Antti Hilmola

    2016-06-01

    Full Text Available In this research project, the validity of the school assessment is examined in the craft subject in Finland’s basic education. The criteria for the school assessment are based on the Finnish Na-tional Core Curriculum (FNCC in which the idea of the Entire Craft (EC is highlighted. How-ever, the discussion as to whether or not the school practice is based on the idea of EC, or whether the teachers are still focused on the technical details of products in reflecting on the pupils’ tool-handling skills, is still an ongoing debate. Learner-centred learning is implicated in EC since the pupils are expected to set goals for the implementation of their own ideating, plan-ning and constructing. And, finally, in such a process, the self-reflection of the implemented out-comes against the goals will take place.  Altogether 73 craft teachers from 59 upper level schools participated in this research project. The pupils’ (N = 982 success was assessed during an EC period using the indicator validated by the previous nation-wide evaluation by the Finn-ish National Board of Education (FNBE. Since the valid school assessment was expected to reflect the success in the Entire Craft Assessment Period (ECAP, the outcomes were assessed against the criteria of the FNCC and compared to the pupils’ school scores. The data was ana-lysed using the Linear Regression Analysis (Enter Method. The central observation was that the pupils’ success in the criteria of the EC do not reflect the 7th grade school scores, in all re-spects. Moreover, the pupils’ success does not reflect the 6th grade school scores. The instruc-tions and supplementary education of the FNCC criteria are needed for craft teachers, especial-ly for class teachers at the lower level. In Finland, also the craft subject is taught by the class teachers at the lower level while, at the upper level, the subject teachers take their place. Ac-cording to the new FNCC, the number of class lessons will be

  13. Job crafting in schools for special education: A qualitative analysis [Job crafting in het speciaal onderwijs: Een kwalitatieve analyse

    NARCIS (Netherlands)

    Wingerden, J. van; Derks, D.; Bakker, A.B.; Dorenbosch, L.

    2013-01-01

    In this article we discuss the design and qualitative (process) evaluation of a job crafting intervention among employees at three Dutch schools for special education. In a period of 1.5 months, fifty employees participated in a group-based training intervention that addressed individual's job

  14. SF6 gas insulated power substations. Effects of fast transients (VFT) on the equipment and adjacent equipment of the Itaipu Binacional SF6 insulated power substations; Subestaciones aisladas a gas SF6. Efectos de los transitorios rapidos (VFT's) sobre equipos y equipos adyacentes de las SE's SF6 de Itaipu Binacional

    Energy Technology Data Exchange (ETDEWEB)

    Santacruz Martinez, Miguel [Usina Hidroelectrica de Itaipu, Assuncao (Paraguay)]. E-mail: santcruz@itaipu.gov.py

    2001-07-01

    With the operation starting of the S F6 gas substations in high voltage systems occurs a new form of overvoltage presently known as Very Fast Transients. This paper aims the phenomenon characterization, defining the origins and the behaviour of the electric systems, and briefly presents the damages caused by the phenomenon on the equipment and adjacent equipment of S F6 gas insulated substations of the Itaipu Binacional, mainly on the power transformers and oil/S F6 isolators of the step-up transformers. These equipment was modified or are been modified as a consequence of the this overvoltage effects.

  15. O activismo estético feminista de Nikki Craft Nikki Craft's aesthetic feminist activism

    Directory of Open Access Journals (Sweden)

    Rui Pedro Fonseca

    2010-12-01

    Full Text Available Uma das condições para que na sociedade sejam alicerçados valores de género misóginos consiste na existência de uma estrutura de produção cultural heterossexual compulsiva, dominante e universalista que estabeleça princípios de representação dos sexos claramente diferenciados, que tendam a favorecer mais o homem em detrimento da mulher. Partimos de um princípio de que a produção da cultura origina processos de reprodução, o que significa, em termos práticos, que a representação de signos, códigos, valores e comportamentos associados aos sexos é potencialmente materializada nas sociedades, por homens e por mulheres. Essa tem sido uma batalha levada a cabo por muitas mulheres a partir da segunda vaga do movimento feminista, nomeadamente pela ala mais radical, que tem procurado reivindicar novos paradigmas no que diz respeito às convenções culturais de género. O que propomos neste estudo é analisar algumas das campanhas levadas a cabo por Nikki Craft, uma feminista radical norte-americana que viria a organizar e/ou a protagonizar nos anos 1970 e 1980 vários protestos em espaços públicos de algumas cidades dos Estados Unidos. Neste estudo procuramos clarificar as motivações e as estratégias levadas a cabo por essa feminista, cujos activismos incidiram contra algumas das estruturas culturais (campo da arte, instituições da beleza e indústria pornográfica legitimadoras de representações desencadeadoras de prejuízos para a mulherOne of the conditions for misogynic genders to be settled in society consists on the existence of a compulsive dominant and universal heterosexual cultural production, which establishes clearly differentiated representation principles of both sexes. These representation principles tend to favour more the man, disregarding the woman. We consider that culture production gives origin to reproduction processes, which means that, in practical terms, the representation of signs, codes, values

  16. Current interruption transients calculation

    CERN Document Server

    Peelo, David F

    2014-01-01

    Provides an original, detailed and practical description of current interruption transients, origins, and the circuits involved, and how they can be calculated Current Interruption Transients Calculationis a comprehensive resource for the understanding, calculation and analysis of the transient recovery voltages (TRVs) and related re-ignition or re-striking transients associated with fault current interruption and the switching of inductive and capacitive load currents in circuits. This book provides an original, detailed and practical description of current interruption transients, origins,

  17. Evidence of Validity of the Job Crafting Behaviors Scale

    Directory of Open Access Journals (Sweden)

    Renata Silva de Carvalho Chinelato

    2015-12-01

    Full Text Available AbstractJob crafting behavior refers to the changes made by workers in their job context for adjusting their activities to their preferences. We sought to adapt and collect validity evidences of the Job Crafting Behaviors Scale for the Brazilian context, in a sample of 491 workers, with a mean age of 26.7 years. Factor analysis revealed that the final instrument consisted of three dimensions (increasing structural job resources, increasing social job resources, increasing challenging job demands, which showed good internal consistency indexes. These dimensions showed low or moderate correlations with work engagement, positive psychological capital, positive job affect, and in-role performance. The scale showed evidence of validity, the use of which is recommended for future research on the changes that people make in their jobs.

  18. Hypnobirth within the NHS: time to ditch the parent craft?

    Science.gov (United States)

    Gavin-Jones, Teri

    2016-05-01

    Antenatal education within the National Health Service (NHS) is a service in decline within some hospital trusts. Classes on offer are being moved into online formats or discontinued completely. Whilst research into antenatal education remains limited, what is known is that good birth preparation is of value. "Participative preparation for childbirth can enhance women's overall satisfaction with the childbirth experience" (Schrader McMillan et al 2009: 49). There are pockets of excellent antenatal education within the NHS, but no system for regulating the quality and content. Traditional 'parent craft' classes can be oversubscribed, turning what should be a participative group into an audience. Offering good quality antenatal education has the potential to increase normality, improve the birth outcome and the experience of both woman and her birth partner. Is it time to ditch the parent craft and implement dynamic woman-focused education?

  19. Craft and Conservation: Features of Danish Journalism Culture

    DEFF Research Database (Denmark)

    Schultz, Ida

    This paper presents the field theory of Pierre Bourdieu, discusses how the framework can be used for studying journalism culture, and illustrates the use in a case study of journalism education in Denmark. The first section makes a first attempt to define Journalism Culture as a logic of practice...... of field, capital and habitus to identity craft as a strong capital in the field and conservation as a dominant logic....

  20. Application of CRAFT in two-dimensional NMR data processing.

    Science.gov (United States)

    Krishnamurthy, Krish; Sefler, Andrea M; Russell, David J

    2017-03-01

    Two-dimensional (2D) data are typically truncated in both dimensions, but invariably and severely so in the indirect dimension. These truncated FIDs and/or interferograms are extensively zero filled, and Fourier transformation of such zero-filled data is always preceded by a rapidly decaying apodization function. Hence, the frequency line width in the spectrum (at least parallel to the evolution dimension) is almost always dominated by the apodization function. Such apodization-driven line broadening in the indirect (t 1 ) dimension leads to the lack of clear resolution of cross peaks in the 2D spectrum. Time-domain analysis (i.e. extraction of frequency, amplitudes, line width, and phase parameters directly from the FID, in this case via Bayesian modeling into a tabular format) of NMR data is another approach for spectral resonance characterization and quantification. The recently published complete reduction to amplitude frequency table (CRAFT) technique converts the raw FID data (i.e. time-domain data) into a table of frequencies, amplitudes, decay rate constants, and phases. CRAFT analyses of time-domain data require minimal or no apodization prior to extraction of the four parameters. We used the CRAFT processing approach for the decimation of the interferograms and compared the results from a variety of 2D spectra against conventional processing with and without linear prediction. The results show that use of the CRAFT technique to decimate the t 1 interferograms yields much narrower spectral line width of the resonances, circumventing the loss of resolution due to apodization. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

  1. Tracking Porters: Learning the Craft of Techno-Anthropology.

    Science.gov (United States)

    Bruun, Maja Hojer; Krause-Jensen, Jakob; Saltofte, Margit

    2015-01-01

    Anthropology attempts to gain insight into people's experiential life-worlds through long-term fieldwork. The quality of anthropological knowledge production, however, does not depend solely on the duration of the stay in the field, but also on a particular way of seeing social situations. The anthropological perspective is grounded in socio-cultural theory and forged by a distinct relativist or contextualist epistemological stance. The point is to understand events, concepts and phenomena from the insiders' point of view and to show how this view relates to the particular social and cultural context. In this chapter, we argue that although anthropology has its specific methodology - including a myriad of ethnographic data-gathering tools, techniques, analytical approaches and theories - it must first and foremost be understood as a craft. Anthropology as craft requires a specific 'anthropological sensibility' that differs from the standardized procedures of normal science. To establish our points we use an example of problem-based project work conducted by a group of Techno-Anthropology students at Aalborg University, we focus on key aspects of this craft and how the students began to learn it: For two weeks the students followed the work of a group of porters. Drawing on anthropological concepts and research strategies the students gained crucial insights about the potential effects of using tracking technologies in the hospital.

  2. Simulating high frequency water quality monitoring data using a catchment runoff attenuation flux tool (CRAFT).

    Science.gov (United States)

    Adams, Russell; Quinn, Paul F; Perks, Matthew; Barber, Nicholas J; Jonczyk, Jennine; Owen, Gareth J

    2016-12-01

    High resolution water quality data has recently become widely available from numerous catchment based monitoring schemes. However, the models that can reproduce time series of concentrations or fluxes have not kept pace with the advances in monitoring data. Model performance at predicting phosphorus (P) and sediment concentrations has frequently been poor with models not fit for purpose except for predicting annual losses. Here, the data from the Eden Demonstration Test Catchments (DTC) project have been used to calibrate the Catchment Runoff Attenuation Flux Tool (CRAFT), a new, parsimonious model developed with the aim of modelling both the generation and attenuation of nutrients and sediments in small to medium sized catchments. The CRAFT has the ability to run on an hourly timestep and can calculate the mass of sediments and nutrients transported by three flow pathways representing rapid surface runoff, fast subsurface drainage and slow groundwater flow (baseflow). The attenuation feature of the model is introduced here; this enables surface runoff and contaminants transported via this pathway to be delayed in reaching the catchment outlet. It was used to investigate some hypotheses of nutrient and sediment transport in the Newby Beck Catchment (NBC) Model performance was assessed using a suite of metrics including visual best fit and the Nash-Sutcliffe efficiency. It was found that this approach for water quality models may be the best assessment method as opposed to using a single metric. Furthermore, it was found that, when the aim of the simulations was to reproduce the time series of total P (TP) or total reactive P (TRP) to get the best visual fit, that attenuation was required. The model will be used in the future to explore the impacts on water quality of different mitigation options in the catchment; these will include attenuation of surface runoff. Copyright © 2016 Elsevier B.V. All rights reserved.

  3. Switching transients in a superconducting coil

    International Nuclear Information System (INIS)

    Owen, E.W.; Shimer, D.W.

    1983-01-01

    A study is made of the transients caused by the fast dump of large superconducting coils. Theoretical analysis, computer simulation, and actual measurements are used. Theoretical analysis can only be applied to the simplest of models. In the computer simulations two models are used, one in which the coil is divided into ten segments and another in which a single coil is employed. The circuit breaker that interrupts the current to the power supply, causing a fast dump, is represented by a time and current dependent conductance. Actual measurements are limited to measurements made incidental to performance tests on the MFTF Yin-yang coils. It is found that the breaker opening time is the critical factor in determining the size and shape of the transient. Instantaneous opening of the breaker causes a lightly damped transient with large amplitude voltages to ground. Increasing the opening time causes the transient to become a monopulse of decreasing amplitude. The voltages at the external terminals are determined by the parameters of the external circuit. For fast opening times the frequency depends on the dump resistor inductance, the circuit capacitance, and the amplitude on the coil current. For slower openings the dump resistor inductance and the current determine the amplitude of the voltage to ground at the terminals. Voltages to ground are less in the interior of the coil, where transients related to the parameters of the coil itself are observed

  4. Maritime Interdiction Operations Small Craft Detection

    International Nuclear Information System (INIS)

    Dougan, A.D.; Trombino, D.; Dunlop, W.; Bordetsky, A.

    2010-01-01

    understand parameters of vessel speed, time, shielding, and distance in this complex three-dimensional space. At the NMIOTC in September 2009, we employed a dual detector portal followed by a chase. In this event, the challenge was to maintain communications after a lapse. When the chase went past the line-of sight reach of the Tactical Operational Center's (TOC) antenna, with interference from a fortress island in Suda Bay, Wave Relay extended the network for continued observation. Sodium iodide radiation detectors were mounted on two Hellenic Navy SEAL fast boats. After making the detection one of the portal boats maintained line-of sight while the other pursued the target vessel. Network access via Wave Relay antennas was maintained until the conclusion of the chase scenario. Progress has been made in the detection of radioactive materials in the maritime environment. The progression of the TNT MIO experiments has demonstrated the potential of the hardware to solve the problems encountered in this physically challenging environment. There continue to be interesting opportunities for research and development. These experiments provide a variety of platforms and motivated participants to perform real-world testing as solutions are made available.

  5. Cladding properties under simulated fuel pin transients

    International Nuclear Information System (INIS)

    Hunter, C.W.; Johnson, G.D.

    1975-01-01

    A description is given of the HEDL fuel pin testing program utilizing a recently developed Fuel Cladding Transient Tester (FCTT) to generate the requisite mechanical property information on irradiated and unirradiated fast reactor fuel cladding under temperature ramp conditions. The test procedure is described, and data are presented

  6. Incidental transients problems in reactor. Application examples

    International Nuclear Information System (INIS)

    Marbach, G.

    1988-03-01

    The fast neutron reactor fuel element qualification should be made not only for nominal operation but also for incidental and accidental transients. Different studies and tests permit to bring this justification such as simulation in hot laboratory after irradiation of irradiated pins or specific tests interpretation [fr

  7. Analysis of transient fuel failure mechanisms: selected ANL programs

    International Nuclear Information System (INIS)

    Deitrich, L.W.

    1975-01-01

    Analytical programs at Argonne National Laboratory related to fuel pin failure mechanisms in fast-reactor accident transients are described. The studies include transient fuel pin mechanics, mechanics of unclad fuel, and mechanical effects concerning potential fuel failure propagation. (U.S.).

  8. Transient drainage summary report

    International Nuclear Information System (INIS)

    1996-09-01

    This report summarizes the history of transient drainage issues on the Uranium Mill Tailings Remedial Action (UMTRA) Project. It defines and describes the UMTRA Project disposal cell transient drainage process and chronicles UMTRA Project treatment of the transient drainage phenomenon. Section 4.0 includes a conceptual cross section of each UMTRA Project disposal site and summarizes design and construction information, the ground water protection strategy, and the potential for transient drainage

  9. PSH Transient Simulation Modeling

    Energy Technology Data Exchange (ETDEWEB)

    Muljadi, Eduard [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-12-21

    PSH Transient Simulation Modeling presentation from the WPTO FY14 - FY16 Peer Review. Transient effects are an important consideration when designing a PSH system, yet numerical techniques for hydraulic transient analysis still need improvements for adjustable-speed (AS) reversible pump-turbine applications.

  10. Fuel cladding mechanical properties for transient analysis

    International Nuclear Information System (INIS)

    Johnson, G.D.; Hunter, C.W.; Hanson, J.E.

    1976-01-01

    Out-of-pile simulated transient tests have been conducted on irradiated fast-reactor fuel pin cladding specimens at heating rates of 10 0 F/s (5.6 0 K/s) and 200 0 F/s (111 0 K/s) to generate mechanical property information for use in describing cladding behavior during off-normal events. Mechanical property data were then analyzed, applying the Larson-Miller Parameter to the effects of heating rate and neutron fluence. Data from simulated transient tests on TREAT-tested fuel pins demonstrate that Plant Protective System termination of 3$/s transients prevents significant damage to cladding. The breach opening produced during simulated transient testing is shown to decrease in size with increasing neutron fluence

  11. Environmental Support to Amphibious Craft, Patrol Boats, and Coastal Ships: An Annotated Bibliography

    National Research Council Canada - National Science Library

    Bachmann, Charles M; Fusina, Robert A; Nichols, C. R; McDermid, Jack

    2008-01-01

    This annotated bibliography is a selection of citations to books, articles, documents, and data bases highlighting environmental conditions that impact the safety and performance of amphibious craft...

  12. Ergonomic Analysis of the Work Condition in Aluminum Crafts Industry

    Science.gov (United States)

    Soewardi, H.; Taufiq, A.; Pradipta, T.

    2017-12-01

    Indonesia has plenty of abundant natural wealth. This natural wealth produces natural materials that can be utilized as a craft product. The craft workers generally still work manually and the work is done repeatedly in one cycle so it is very susceptible to musculoskeletal disorders. Musculoskeletal disorders will cause decrease of worker’s effectiveness and efficiency in completing the task. Thus, this fact has some adverse impact for the company. The purpose of this study is to analyze some task in manufacturing a traditional cooking tool (griddle) which encompasses mold of the griddle, refine of the griddle and the finishing touch by using the Occupational Repetitive Action Index (OCRA index) method. This method consists of high frequency movements, large forces, awkward postures, insufficient resting time and other factor such as vibration. Result of this study shows that in the molding operation, the worker has uncertain and medium risk on right hand in manufacturing small and large size of griddle with OCRA index is 2.5 and 5.3 respectively. In the refining operation the worker has light and medium risk on left hand in manufacturing small and large size with OCRA index is 3.6 and 5.8 using grinding machine and 5.8, 5.2, 6.3 and 5.0 using miser tool. In finishing operation, the worker has high risk on right hand in numbering of code griddle and has medium risk on right hand and medium on left hand in labeling with OCRA index is 9, 6.1 and 6.8 While in assembling operation the worker has no risk. Score that it indicates the risk level of the task in such job. Thus the following actions are to improve the work condition ergonomicly in all operation in alumunium craft.

  13. Complete analysis of steady and transient missile aerodynamic/propulsive/plume flowfield interactions

    Science.gov (United States)

    York, B. J.; Sinha, N.; Dash, S. M.; Hosangadi, A.; Kenzakowski, D. C.; Lee, R. A.

    1992-07-01

    The analysis of steady and transient aerodynamic/propulsive/plume flowfield interactions utilizing several state-of-the-art computer codes (PARCH, CRAFT, and SCHAFT) is discussed. These codes have been extended to include advanced turbulence models, generalized thermochemistry, and multiphase nonequilibrium capabilities. Several specialized versions of these codes have been developed for specific applications. This paper presents a brief overview of these codes followed by selected cases demonstrating steady and transient analyses of conventional as well as advanced missile systems. Areas requiring upgrades include turbulence modeling in a highly compressible environment and the treatment of particulates in general. Recent progress in these areas are highlighted.

  14. JEAN CLAUDE RENARD: (POETRY AS CRAFT OF TRANSPARENCY

    Directory of Open Access Journals (Sweden)

    María del Sagrario Rollán

    2015-04-01

    Full Text Available The work of Jean-Claude Renard (Toulon 1922- Paris 2002 appears from the beginning marked by the metaphor of the journey - Songs for land lost (1947, and the craft of transparency. The poet begins the journey - that originates in the experience of death and destruction of a world shaken by the war, with a word that transcends the nonsense, and calls for “the country where forgiveness is / and are childhoods “a word that is built in search of human spaces and anticipates them. The adventure through the exercise of Solitude (1951, requirement beyond itself, a kind of internal and painful split: “I am separated from my heart,” releasing it, in turn, to the knowledge of the world and the gift that transfigures. The metamorphosis of the World (1951 takes place in the act of writing itself, for in him a knowledge of the essential reality is given, from which the party of pure celebrated say, “Oh breathing started / in the center of the loaf and snow “. Poetry as craft of transparency J.C. Renard develops in Un autre parole  (1981, prose poetry admirably clarifies its internal relations with theology and mysticism. The poet moves beyond “ailleurs” to a previous or future place of reconciliation and love letters between beings: “One happy pasture / leads above child / each wisdom to your name / and every love your body.”

  15. Inshore craft traditional working vessels of the british isles

    CERN Document Server

    Greenhill, Basil

    2013-01-01

    This comprehensive reference work describes and illustrates some 200 types of inshore craft that once fished and traded, under oar and sail, around the coasts of the British Isles. The types are arranged by coastal area and each is described in terms of its shape and design, fitness for location and purpose, build, evolution and geographical distribution. Details of dimensions, rig, building materials, seamanship and the survival of examples are given where known, while hundreds of line drawings and photographs show the vessels in their original forms.A team of twelve experts describe all these boat types and, in addition, there are introductions to the main geographic areas outlining the physical environments, fisheries and other uses of the sea that have influenced boat design; maps of all the areas show ports and physical features.At the beginning of the last century sail and oar dominated fisheries and local trade: one hundred years later those craft have all but vanished. This book brings alive for marit...

  16. Overview of craft brewing specificities and potentially associated microbiota.

    Science.gov (United States)

    Rodhouse, Lindsey; Carbonero, Franck

    2017-09-14

    The brewing process differs slightly in craft breweries as compared to industrial breweries, as there are fewer control points. This affects the microbiota of the final product. Beer contains several antimicrobial properties that protect it from pathogens, such as low pH, low oxygen and high carbon dioxide content, and the addition of hops. However, these hurdles have limited power controlling spoilage organisms. Contamination by these organisms can originate in the raw materials, persist in the environment, and be introduced by using flavoring ingredients later in the process. Spoilage is a prominent issue in brewing, and can cause quality degradation resulting in consumer rejection and product waste. For example, lactic acid bacteria are predominately associated with producing a ropy texture and haze, along with producing diacetyl which gives the beer butter flavor notes. Other microorganisms may not affect flavor or aroma, but can retard fermentation by consuming nutrients needed by fermentation yeast. Quality control in craft breweries today relies on culturing methods to detect specific spoilage organisms. Using media can be beneficial for detecting the most common beer spoilers, such as Lactobacillus and Pediococci. However, these methods are time consuming with long incubation periods. Molecular methods such as community profiling or high throughput sequencing are better used for identifying entire populations of beer. These methods allow for detection, differentiation, and identification of taxa.

  17. Job crafting and its impact on work engagement and job satisfaction in mining and manufacturing

    NARCIS (Netherlands)

    De Beer, L.T. (Leon T.); M. Tims (Maria); A.B. Bakker (Arnold)

    2016-01-01

    textabstractThe purpose of this study was to investigate job crafting and its relationship with work engagement and job satisfaction within the South African context. This research is important as job crafting has been shown to have a positive influence on employee motivation. A cross-sectional

  18. Crafting qualities in designing QR-coded embroidery and bedtime stories

    NARCIS (Netherlands)

    Kuusk, K.; Wensveen, S.A.G.; Tomico, O.

    2014-01-01

    There is a renewed interest into crafts and what it can mean when integrating new technologies into textiles. This paper proposes to embed craft qualities and sustainable values into designing smart textile projects. Our design iterations QR-Coded Embroidery and Bedtime Stories combine textiles,

  19. The Need for the United States Army to Possess a Landing Craft with Maneuver Capabilities

    Science.gov (United States)

    2015-06-12

    landing craft after the 2004 Indian Ocean tsunami and the 2009 Myanmar cyclone.9 The landing craft enabled the relief effort to bypass partially...requirements for Army aviation . The Need for America’s Amphibious Capability In his thesis, “The Need for the United States of America’s Amphibious

  20. The job crafting intervention: effects on job resources, self-efficacy, and affective well-being

    NARCIS (Netherlands)

    van den Heuvel, M.; Demerouti, E.; Peeters, M.C.W.

    2015-01-01

    This quasi-experimental field study examines the effects of an intervention designed to boost job resources, affective well-being, and self-efficacy via job crafting behaviour. Employees (n = 39) in a Dutch police district received a 1-day training, after which they worked towards self-set crafting

  1. The job crafting intervention : Effects on job resources, self-efficacy, and affective well-being

    NARCIS (Netherlands)

    van den Heuvel, Machteld; Demerouti, Evangelia; Peeters, Maria|info:eu-repo/dai/nl/07487893X

    2015-01-01

    This quasi-experimental field study examines the effects of an intervention designed to boost job resources, affective well-being, and self-efficacy via job crafting behaviour. Employees (n = 39) in a Dutch police district received a 1-day training, after which they worked towards self-set crafting

  2. Microwave-assisted facile and rapid Friedel-Crafts benzoylation of arenes catalysed by bismuth trifluoromethanesulfonate

    DEFF Research Database (Denmark)

    Tran, Phoung Hoang; Hansen, Poul Erik; Pham, Thuy Than

    2014-01-01

    The catalytic activity of metal triflates was investigated in Friedel–Crafts benzoylation under microwave irradiation. Friedel–Crafts benzoylation with benzoyl chloride of a variety of arenes containing electron-rich and electron-poor rings using bismuth triflate under microwave irradiation is de...

  3. A discussion of the necessity of craft education in the 21st century

    Directory of Open Access Journals (Sweden)

    Eva Veeber

    2015-02-01

    Full Text Available Craft education has held a permanent place in Estonian and Finnish schools, although its value and appreciation have changed over time. The aim of the article is to discuss the necessity of craft education in today’s world and its possible impact on the development of children and adolescents. The discussion seeks an interdisciplinary explanation using three perspectives that complement each other. The first describes the challenges of modern society with respect to individual development and schooling. The second deals with Aaron Antonovsky's theory of generalized resistance resources and an individual's possibility to manage in a stressful society. The third addresses the individual as a developing neurological being, along with the effect of learning and practicing motor skills on the human brain. We conclude that crafts is a multidisciplinary phenomenon, and that learning and practicing crafts promotes the comprehension of diversity and challenges in life. Additionally, educational crafts enriches the learning environment, offering opportunities to develop transferable skills that human beings constantly need in society. In addition, crafts provides a balanced way to come to understand the world and one’s role in it, by simultaneously promoting motor and cognitive development and making unique demands on one’s being.Keywords: crafts, craft education, making, sense of coherence, education, embodiment

  4. 46 CFR 180.204 - Survival craft-vessels operating on coastwise routes.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Survival craft-vessels operating on coastwise routes. 180.204 Section 180.204 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL... Craft § 180.204 Survival craft—vessels operating on coastwise routes. (a) Except as allowed by paragraph...

  5. 46 CFR 180.202 - Survival craft-vessels operating on oceans routes.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Survival craft-vessels operating on oceans routes. 180... VESSELS (UNDER 100 GROSS TONS) LIFESAVING EQUIPMENT AND ARRANGEMENTS Number and Type of Survival Craft § 180.202 Survival craft—vessels operating on oceans routes. (a) Each vessel certificated to operate on...

  6. 46 CFR 117.207 - Survival craft-vessels operating on lakes, bays, and sounds routes.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Survival craft-vessels operating on lakes, bays, and... 49 PASSENGERS LIFESAVING EQUIPMENT AND ARRANGEMENTS Number and Type of Survival Craft § 117.207 Survival craft—vessels operating on lakes, bays, and sounds routes. (a) Each vessel with overnight...

  7. 33 CFR 100.916 - Chris Craft Silver Cup Races, Algonac, MI.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Chris Craft Silver Cup Races, Algonac, MI. 100.916 Section 100.916 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY REGATTAS AND MARINE PARADES SAFETY OF LIFE ON NAVIGABLE WATERS § 100.916 Chris Craft Silver Cup...

  8. Shifting Values: The Promotional Policies of Craft and Industrial Design in Flanders (1980-2001)

    NARCIS (Netherlands)

    Gimeno Martinez, J.C.

    2014-01-01

    This article looks at the shifts in cultural promotion of craft as a result of a particular political conjuncture in the region of Flanders (Belgium). In 1991, as a consequence of Belgian federalization, the promotion policies for craft in Flanders passed from being answerable to the Belgian state

  9. 46 CFR 180.208 - Survival craft-vessels operating on rivers routes.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Survival craft-vessels operating on rivers routes. 180... VESSELS (UNDER 100 GROSS TONS) LIFESAVING EQUIPMENT AND ARRANGEMENTS Number and Type of Survival Craft § 180.208 Survival craft—vessels operating on rivers routes. (a) Except as allowed by paragraphs (c), (d...

  10. Design and Craft Education in Iceland, Pedagogical Background and Development: A Literature Review

    Science.gov (United States)

    Olafsson, Brynjar; Thorsteinsson, Gisli

    2009-01-01

    Sloyd pedagogy was introduced towards the close of the 18th century to Icelandic educators. Subsequently craft was established as a specific subject aimed at general education. In the beginning craft was called "school industry," to distinguish it from "home industry" whose aim was to help homes to be self-sufficient for…

  11. "Miss! I'm Done!" Finishing Craft Assignments as a Situated Activity System in Preschool

    Science.gov (United States)

    Deunk, Marjolein; Berenst, Jan; de Glopper, Kees

    2010-01-01

    We describe the Situated Activity System of finishing craft assignments in preschool: the specific, routinized way that child and teacher jointly close the child's craft assignment, employing a specific discourse pattern. We analyzed the interactions of 14 Dutch children between 2.1 and 3.10 years old while they were finishing their craft…

  12. Cultivating Perspectival Acuity: The Value and Cost of Integrating Theory, Craft, Research, and Practice

    Directory of Open Access Journals (Sweden)

    Joe Manganelli

    2016-10-01

    Full Text Available This paper presents reflections on integrating theory, craft, research, and practice to improve the accuracy and resiliency of each. The reflections build toward a set of statements about the value and the cost of integrating theory, craft, research, and practice. Specifically, the authors offer the Privileged Work / Non-Privileged Work Framework and concept of cultivating Perspectival Acuity.

  13. Digitizing Craft: Creative Writing Studies and New Media--A Proposal

    Science.gov (United States)

    Koehler, Adam

    2013-01-01

    This article identifies and examines a digital arm of creative writing studies and organizes that proposal into four categories through which to theorize the "craft" of creative production, each borrowed from Tim Mayers's "(Re)Writing Craft: Composition, Creative Writing, and the Future of English Studies": process, genre, author, and…

  14. Cooking and Hammering: Primary School Pupils' Concepts of Their Craft Skills

    Science.gov (United States)

    Müürsepp, Mare; Kikkull, Andry

    2014-01-01

    The aim of the study is to clear the significance of craft skills for the pupils in age nine and twelve years. More than 200 pupils were asked to define, what are the most important skills for the pupils of their age. The results bring out that category of the skills related to craft subject is of the most presented categories in pupils' self…

  15. Job crafting at the team and individual level: Implications for work engagement and performance

    NARCIS (Netherlands)

    Tims, M.; Bakker, A.B.; Derks, D.; Rhenen, van W.

    2013-01-01

    Previous research suggests that employee job crafting is positively related to job performance through employee work engagement. The present study expands this individual-level perspective to the team level by hypothesizing that team job crafting relates positively to team performance through team

  16. The Influence of Future Time Perspective on Worker Outcomes: The Role of Job Crafting

    NARCIS (Netherlands)

    Kooij, T.A.M.; Tims, M.; Akkermans, J.

    2017-01-01

    This two-wave study aimed to examine future time perspective (FTP) as an antecedent of job crafting, and in turn job crafting as a mediator in associations between FTP and work outcomes. Based on the lifespan socio-emotional selectivity theory, we expected that open-ended and limited FTP would evoke

  17. Workaholism versus work engagement and job crafting : What is the role of self-management strategies?

    NARCIS (Netherlands)

    Zeijen, Marijntje E.L.; Peeters, Maria C.W.; Hakanen, Jari J.

    2018-01-01

    Job crafting refers to the proactive actions employees take to redesign their jobs in order to get a better fit with their competencies, expectations, and wishes. So far, little is known about job crafting's underlying mechanisms. In this study, we examine how two different states of affective

  18. Workaholism versus work engagement and job crafting : What is the role of self-management strategies?

    NARCIS (Netherlands)

    Zeijen, M.; Peeters, M.C.W.; Hakanen, J.

    Job crafting refers to the proactive actions employees take to redesign their jobs in order to get a better fit with their competencies, expectations, and wishes. So far, little is known about job crafting's underlying mechanisms. In this study, we examine how two different states of affective

  19. Report: The New Brunswick Indian Arts and Crafts Association Workshop for Board Members. No. 165.

    Science.gov (United States)

    Goddu, Roland; Nicholas, Darryl

    This is a report on a training session conducted for the board members of the New Brunswick Indian Arts and Crafts Association with the aim of outlining purposes of the Association, and assisting in drawing up plans for a formal administrative structure among arts and crafts organizations. An administrative manual containing terms of reference…

  20. The Development of Indian and Eskimo Art and Crafts in the Far North.

    Science.gov (United States)

    Phillips, R. A. J.; And Others

    The focus of the conference, "The Development of Indian and Eskimo Art and Crafts in the Far North," was the creation of a market for reputable Indian and Eskimo art work on an economically sound basis which would benefit both the native artists and the Canadian economy. Two governmental reports, "Northern Arts and Crafts" and…

  1. The impact of job crafting on job demands, job resources, and well-being

    NARCIS (Netherlands)

    Tims, M.; Bakker, A.B.; Derks, D.

    2013-01-01

    This longitudinal study examined whether employees can impact their own well-being by crafting their job demands and resources. Based on the Job Demands-Resources model, we hypothesized that employee job crafting would have an impact on work engagement, job satisfaction, and burnout through changes

  2. Computer Technology-Integrated Projects Should Not Supplant Craft Projects in Science Education

    Science.gov (United States)

    Klopp, Tabatha J.; Rule, Audrey C.; Schneider, Jean Suchsland; Boody, Robert M.

    2014-01-01

    The current emphasis on computer technology integration and narrowing of the curriculum has displaced arts and crafts. However, the hands-on, concrete nature of craft work in science modeling enables students to understand difficult concepts and to be engaged and motivated while learning spatial, logical, and sequential thinking skills. Analogy…

  3. TRANSIENT ELECTRONICS CATEGORIZATION

    Science.gov (United States)

    2017-08-24

    AFRL-RY-WP-TR-2017-0169 TRANSIENT ELECTRONICS CATEGORIZATION Dr. Burhan Bayraktaroglu Devices for Sensing Branch Aerospace Components & Subsystems...SUBTITLE TRANSIENT ELECTRONICS CATEGORIZATION 5a. CONTRACT NUMBER In-house 5b. GRANT NUMBER N/A 5c. PROGRAM ELEMENT NUMBER N/A 6. AUTHOR(S) Dr. Burhan...88ABW-2017-3747, Clearance Date 31 July 2017. Paper contains color. 14. ABSTRACT Transient electronics is an emerging technology area that lacks proper

  4. When craft and science collide: Improving therapeutic practices through evidence-based innovations.

    Science.gov (United States)

    Justice, Laura M

    2010-04-01

    Evidence-based practice (EBP) is a model of clinical decision-making that is increasingly being advocated for use in the field of speech-language pathology. With the increased emphasis on scientific evidence as a form of knowledge important to EBP, clinicians may wonder whether their craft-based knowledge (i.e., knowledge derived from theory and practice), remains a legitimate form of knowledge for use in clinician decisions. This article describes forms of knowledge that may be used to address clinical questions, to include both craft and science. Additionally, the steps used when engaging in EBP are described so that clinicians understand when and how craft comes into play. The major premise addressed within this article is that craft is a legitimate form of knowledge and that engagement in EBP requires one to employ craft-based knowledge.

  5. Flow transients experiments with refrigerant-12

    International Nuclear Information System (INIS)

    Celata, G.P.; D'Annibale, F.; Farello, G.E.; Setaro, T.

    1986-01-01

    Flow transients have been investigated in a wide range of thermal-hydraulics situations with Refrigerannt-12. Six pressures (including the reference to PWR and BWR characteristic liquid to vapour densities ratios), several periods of the flowrate transients coastdown during the simulated flow decays, and different specific mass flowrate have been studied emploiyng a circular duct test section (Dsub(i)=7,5 mm). Two heated lengths of the test section have been considered (L = 2300 and 1180 mm). Experimental data have shown the complete inadequacy of steady-state critical heat flux correlations in predicting the onset of boiling crisis during fast flow transients (half-flow decay time, tsub(h)lt5.0-6.0 s). The flow transient does not show dependence, in terms of DNB conditions ,upon the length of the test section: the ratio between transient and steady-state critical mass flowrate is not dependent on the tested geometry. The time interval from the start of the flowrate transient to the onset of DNB (time to crisis), has been experimentally determined for all the runs. Data analysis for a better theoretical prediction of the phenomenon has been accomplished, and a design correlation for DNB conditons and time to crisis prediction has been proposed

  6. 33 CFR 150.515 - What are the requirements for weight testing of newly installed or relocated craft?

    Science.gov (United States)

    2010-07-01

    ... weight testing of newly installed or relocated craft? 150.515 Section 150.515 Navigation and Navigable... testing of newly installed or relocated craft? (a) The operator must perform installation weight testing... (a) of this section, when survival crafts are relocated to another deepwater port. ...

  7. 46 CFR 24.15-5 - Canadian pleasure craft temporarily using navigable waters of the United States.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Canadian pleasure craft temporarily using navigable... SECURITY UNINSPECTED VESSELS GENERAL PROVISIONS Equivalents § 24.15-5 Canadian pleasure craft temporarily using navigable waters of the United States. Uninspected Canadian pleasure craft (uninspected vessels...

  8. 33 CFR 150.503 - What are the time interval requirements for maintenance on survival craft falls?

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false What are the time interval requirements for maintenance on survival craft falls? 150.503 Section 150.503 Navigation and Navigable Waters... maintenance on survival craft falls? (a) Each fall used in a launching device for survival craft or rescue...

  9. 46 CFR 25.25-17 - Survival craft requirements for uninspected passenger vessels of at least 100 gross tons.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Survival craft requirements for uninspected passenger... Survival craft requirements for uninspected passenger vessels of at least 100 gross tons. (a) Each uninspected passenger vessel of at least 100 gross tons must have adequate survival craft with enough capacity...

  10. 33 CFR 125.15 - Access to waterfront facilities, and port and harbor areas, including vessels and harbor craft...

    Science.gov (United States)

    2010-07-01

    ..., and port and harbor areas, including vessels and harbor craft therein. 125.15 Section 125.15....15 Access to waterfront facilities, and port and harbor areas, including vessels and harbor craft....09 to those waterfront facilities, and port and harbor areas, including vessels and harbor craft...

  11. 33 CFR 149.303 - What survival craft and rescue boats may be used on a manned deepwater port?

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false What survival craft and rescue boats may be used on a manned deepwater port? 149.303 Section 149.303 Navigation and Navigable Waters... craft and rescue boats may be used on a manned deepwater port? (a) Each survival craft on a manned...

  12. 25 CFR 309.24 - How will statements about Indian origin of art or craft products be interpreted?

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false How will statements about Indian origin of art or craft products be interpreted? 309.24 Section 309.24 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR PROTECTION OF INDIAN ARTS AND CRAFTS PRODUCTS § 309.24 How will statements about Indian origin of...

  13. 77 FR 32985 - Notice of Inventory Completion: U.S. Department of the Interior, Indian Arts and Crafts Board...

    Science.gov (United States)

    2012-06-04

    ... Inventory Completion: U.S. Department of the Interior, Indian Arts and Crafts Board, Museum of the Plains... Plains Indian, Indian Arts and Crafts Board, has completed an inventory of human remains, in consultation..., Indian Arts and Crafts Board. Disposition of the human remains to the Indian tribes stated below may...

  14. Spectroscopic classification of transients

    DEFF Research Database (Denmark)

    Stritzinger, M. D.; Fraser, M.; Hummelmose, N. N.

    2017-01-01

    We report the spectroscopic classification of several transients based on observations taken with the Nordic Optical Telescope (NOT) equipped with ALFOSC, over the nights 23-25 August 2017.......We report the spectroscopic classification of several transients based on observations taken with the Nordic Optical Telescope (NOT) equipped with ALFOSC, over the nights 23-25 August 2017....

  15. On Grounding of Fast Ships

    DEFF Research Database (Denmark)

    Simonsen, Bo Cerup; Pedersen, Preben Terndrup

    1997-01-01

    The paper deals with analysis of grounding of high-speed crafts. It is the purpose to present a comprehensive mathematical model for calculation of the overall dynamic ship response during grounding. This procedure is applied to derive the motions, the time varying sectional forces and the local...... loads during grounding on plane, sloping, sandy bottoms for six different designs of fast monohull ships made from steel, aluminium or GRP sandwich materials. The results show that the effect of the hull flexibility is to reduce the overall dynamic sectional loads on the hull girder. The considered...... numerical examples also indicate that, even with impact speeds of 40 knots against a 1:10 sloping bottom, the global strength of the hull girder is not exceeded by the grounding induced loads.For the local deformation of high-speed ship hulls at the point of contact with the ground, the paper presents...

  16. Low-cost silicon wafer dicing using a craft cutter

    KAUST Repository

    Fan, Yiqiang

    2014-05-20

    This paper reports a low-cost silicon wafer dicing technique using a commercial craft cutter. The 4-inch silicon wafers were scribed using a crafter cutter with a mounted diamond blade. The pre-programmed automated process can reach a minimum die feature of 3 mm by 3 mm. We performed this scribing process on the top polished surface of a silicon wafer; we also created a scribing method for the back-unpolished surface in order to protect the structures on the wafer during scribing. Compared with other wafer dicing methods, our proposed dicing technique is extremely low cost (lower than $1,000), and suitable for silicon wafer dicing in microelectromechanical or microfluidic fields, which usually have a relatively large die dimension. The proposed dicing technique is also usable for dicing multiple project wafers, a process where dies of different dimensions are diced on the same wafer.

  17. Professional Interventions as a State-Crafting Grammar

    DEFF Research Database (Denmark)

    Ydesen, Christian; Øland, Trine

    2015-01-01

    of reasoning. The second part titled ‘Theoretical concepts: State, Profession, Immigrant’ aims at presenting and clarifying the triad ‘state – profession – immigrant’ through the conceptual lens of state as a bureaucratic field and state-crafting. The third part designated ‘Working with historical sources......The first part under the headline ‘Theory and the construction of the research object’ will clarify our concept of theory and the Bourdieusian and Wacquantian way of working with theory and theoretical constructions when doing empirical and historical work as basis for the article’s chain......’ consists of three subsections altogether. The first addresses in brief the question of putting the theoretical model into work empirically focussing on the concept of field to avoid determinism and presentism when working with a com-prehensive theoretical framework. The second and third subsections takes...

  18. Understanding and crafting the mix the art of recording

    CERN Document Server

    Moylan, William

    2014-01-01

    Understanding and Crafting the Mix, 3rd edition provides the framework to identify, evaluate, and shape your recordings with clear and systematic methods. Featuring numerous exercises, this third edition allows you to develop critical listening and analytical skills to gain greater control over the quality of your recordings. Sample production sequences and descriptions of the recording engineer's role as composer, conductor, and performer provide you with a clear view of the entire recording process. Dr. William Moylan takes an inside look into a range of iconic popular music, thus offering insights into making meaningful sound judgments during recording. His unique focus on the aesthetic of recording and mixing will allow you to immediately and artfully apply his expertise while at the mixing desk. A companion website features recorded tracks to use in exercises, reference materials, additional examples of mixes and sound qualities, and mixed tracks.

  19. Crafting Sustainable Development Solutions: Frugal Innovations of Grassroots Entrepreneurs

    Directory of Open Access Journals (Sweden)

    Mario Pansera

    2016-01-01

    Full Text Available A shift in the entrepreneurial landscape is taking place brought about by grassroots innovators with little formal education and technological knowhow, living and working in penurious environments. This research represents an emerging third wave of literature on Bottom of the Pyramid innovation, where products are offered for and by the underserved. Using primary and secondary data derived from four cases of grassroots entrepreneurs in the Indian Subcontinent, the study explores the phenomenon where resource scarce entrepreneurs craft solutions that are environmental friendly, with low overall ownership costs, and use locally available material. We argue that the grassroots phenomenon can be fruitfully exploited to achieve the new Sustainable Development Goals proposed by the UN as a post-2015 strategy for the future of global governance. These innovations might have a tremendous impact not only in terms of serving unmet and ignored consumer needs, but also longer term impacts through enhanced productivity, sustainability, poverty reduction and inclusion promotion.

  20. Design- and Craft thinking analysed as Embodied Cognition

    Directory of Open Access Journals (Sweden)

    Camilla Groth

    2016-06-01

    Full Text Available Through the concept of design thinking the act of designing is presented as an intellectual activity, and the act of planning the design is elevated over the making process. However, the importance of materiality and the embodied sense-making that occurs in this context should not be forgotten. In this study, embodied cognition in design and craft practices was investigated through three case studies. The study takes on an enhanced tactile perspective as a methodological platform; thus, the cases involve 1 deafblind makers in ceramics, 2 a practice-led self-study report on tactile experiences while working with clay and 3 a study on design students’ use of their tactile sense during material exploration. The results show that the act of thinking design involves the body as a knowledge provider.

  1. Multipurpose stabilization of the advanced marine surface crafts

    Directory of Open Access Journals (Sweden)

    Sevostyanov Ruslan A.

    2016-01-01

    Full Text Available Advanced marine surface crafts, such as SWATHs, catamarans or hovercrafts become more and more popular for a great range of various tasks. They usually operate at much higher speed than conventional ships. Moreover, in the open sea there are a lot of requirements and restrictions concerning the quality of such crafts’ dynamics, especially in case of the wind or waves. This paper considers application of the control law with a special multipurpose structure for autopilot design for amphibious air cushion vehicles. Such control law allows to decompose the autopilot task into simpler optimization subtasks. Efficiency of this approach is shown in the task of stabilizing yaw angle of the air cushion vehicle in the different weather conditions.

  2. NALAP: an LMFBR system transient code

    International Nuclear Information System (INIS)

    Martin, B.A.; Agrawal, A.K.; Albright, D.C.; Epel, L.G.; Maise, G.

    1975-07-01

    NALAP is a LMFBR system transient code. This code, adapted from the light water reactor transient code RELAP 3B, simulates thermal-hydraulic response of sodium cooled fast breeder reactors when subjected to postulated accidents such as a massive pipe break as well as a variety of other upset conditions that do not disrupt the system geometry. Various components of the plant are represented by control volumes. These control volumes are connected by junctions some of which may be leak or fill junctions. The fluid flow equations are modeled as compressible, single-stream flow with momentum flux in one dimension. The transient response is computed by integrating the thermal-hydraulic conservation equations from user-initialized operating conditions by an implicit numerical scheme. Point kinetics approximation is used to represent the time dependent heat generation in the reactor core

  3. Striving towards improved Friedel-Crafts acylation catalysts

    International Nuclear Information System (INIS)

    Scott, N.M.; Deacon, G.B.

    1998-01-01

    Full text: Lanthanum, ytterbium and scandium salts of trifluoromethanesulfonic acid have been shown to act as promising Lewis acid catalysts for the Friedel-Craft acylation reactions. In our study catalytic acylation of anisole by acetic anhydride in nitroethane was investigated. Yields were determined after extraction of para-methoxyacetophenone from the reaction mixture by G.L.C using the external standardisation method. Anhydrous lanthanoid tris-triflate salts [Ln(O 3 SCF 3 ) 3 , Ln La, Y, Nd, Eu and Yb] were initially investigated as catalysts. Ytterbium tris-triflate was found to be the most effective giving ∼90% of the acylation product. The hydrated lanthanide tris-nitrate salts [Ln(NO 3 ) 3 .nH 2 O, Ln = La, Nd, Eu and Yb] were also investigated using in situ dehydration with acetic anhydride. These were found to have low solubility in the reaction mixture and gave poor yields of para-methoxyacetophenone. The formation of side products was suggested by the low total recovery of anisole and para-methoxyacetophenone. The blocking of coordination sites of these catalysts by tetraglyme resulted in a 50% reduction in acylation activity compared with the simple salt. Addition of Li(O 3 SCF 3 ) to Ln(O 3 SCF 3 ) 3 catalysts (ratio of 4:1)had only a slight accelerating effect on the Friedel-Crafts acylation reaction and the yield was only marginally greater than that in the absence of the added salt. In contrast Li(ClO 4 ) dramatically decreased reaction times and improved the yield of para-methoxyace-tophenone, as recently reported

  4. Adaptation and implementation of the TRACE code for transient analysis in designs lead cooled fast reactors; Adaptacion y aplicacion del codigo TRACE para el analisis de transitorios en disenos de reactores rapidos refrigerados por plomo

    Energy Technology Data Exchange (ETDEWEB)

    Lazaro, A.; Ammirabile, L.; Martorell, S.

    2015-07-01

    Lead-Cooled Fast Reactor (LFR) has been identified as one of promising future reactor concepts in the technology road map of the Generation IVC International Forum (GIF)as well as in the Deployment Strategy of the European Sustainable Nuclear Industrial Initiative (ESNII), both aiming at improved sustainability, enhanced safety, economic competitiveness, and proliferation resistance. This new nuclear reactor concept requires the development of computational tools to be applied in design and safety assessments to confirm improved inherent and passive safety features of this design. One approach to this issue is to modify the current computational codes developed for the simulation of Light Water Reactors towards their applicability for the new designs. This paper reports on the performed modifications of the TRACE system code to make it applicable to LFR safety assessments. The capabilities of the modified code are demonstrated on series of benchmark exercises performed versus other safety analysis codes. (Author)

  5. The impact of job crafting on job demands, job resources, and well-being.

    Science.gov (United States)

    Tims, Maria; Bakker, Arnold B; Derks, Daantje

    2013-04-01

    This longitudinal study examined whether employees can impact their own well-being by crafting their job demands and resources. Based on the job demands-resources model, we hypothesized that employee job crafting would have an impact on work engagement, job satisfaction, and burnout through changes in job demands and job resources. Data was collected in a chemical plant at three time points with one month in between the measurement waves (N = 288). The results of structural equation modeling showed that employees who crafted their job resources in the first month of the study showed an increase in their structural and social resources over the course of the study (2 months). This increase in job resources was positively related to employee well-being (increased engagement and job satisfaction, and decreased burnout). Crafting job demands did not result in a change in job demands, but results revealed direct effects of crafting challenging demands on increases in well-being. We conclude that employee job crafting has a positive impact on well-being and that employees therefore should be offered opportunities to craft their own jobs.

  6. Legal and economic implications of the German Craft Code Amendment 2004

    Directory of Open Access Journals (Sweden)

    Wolfgang Benzel

    2012-01-01

    Full Text Available As the main reason for initiating an amendment of the Trade and Crafts Code in 2004 was the decrease in the number of companies in general and the number of skilled crafts enterprises in particular and was also due to the fact that the number of employees in the skilled crafts sector had constantly fallen and many companies were not able to find a successor, it was the declared aim of the amendment to counter this structural crisis as well as reducing illegal employment and removing native discrimination. This would then ensure a higher level of employment especially through new company formations and takeovers of existing companies.In addition to providing an important contribution towards the assessment of the basic success of the 2004 Trade and Crafts Code amendment, the results can therefore be used at an international level for discussions on skilled crafts legislation outside Germany. As German skilled crafts legislation developed in a completely different manner from skilled crafts legislation in most other European countries, this aspect is particularly significant and it is conceivable that the results will be useful beyond the borders of the Federal Republic of Germany. The research findings will also be important in determining the limits of deregulation and when it can be considered counterproductive from an economic point of view.

  7. High energy transients: The millisecond domain

    Science.gov (United States)

    Rao, A. R.

    2018-02-01

    The search for high energy transients in the millisecond domain has come to the focus in recent times due to the detection of gravitational wave events and the identification of fast radio bursts as cosmological sources. Here we highlight the sensitivity limitations in the currently operating hard X-ray telescopes and give some details of the search for millisecond events in the AstroSat CZT Imager data.

  8. Analyzing components of Community Reinforcement and Family Training (CRAFT): Is treatment entry training sufficient?

    Science.gov (United States)

    Kirby, Kimberly C; Benishek, Lois A; Kerwin, MaryLouise E; Dugosh, Karen L; Carpenedo, Carolyn M; Bresani, Elena; Haugh, James A; Washio, Yukiko; Meyers, Robert J

    2017-11-01

    Community Reinforcement and Family Training (CRAFT) assists family members with a treatment-resistant loved one. The most consistent outcome of CRAFT is increased treatment entry of the identified treatment-resistant person (IP). This led us to question whether all 6 components of CRAFT are necessary. In a randomized clinical trial, 115 concerned significant others (CSOs) of an IP received 12-14 sessions of the full CRAFT intervention, 4-6 sessions focused on Treatment Entry Training (TEnT), or 12-14 sessions of Al-Anon/Nar-Anon Facilitation (ANF). We monitored treatment entry, attendance, and substance use of the IP and the CSO's mood and functioning. Data were collected at baseline and 4, 6, and 9 months after the baseline. We found significant reductions in time to treatment entry (χ(2)2 = 8.89, p = .01) and greater treatment entry rates for CRAFT (62%; odds ratio [OR] = 2.7, 95% confidence interval [CI] = 1.1-6.9) and TEnT (63%; OR = 2.9, 95% CI = 1.2-7.5) compared with ANF (37%), but CRAFT and TEnT did not differ significantly from each other (OR = 1.1, 95% CI = 0.4-2.7). No between-group differences in IP drug use were reported by CSOs, but days of drug use decreased over time for all groups (F(3, 277) = 13.47, p CRAFT produces greater treatment entry rates than ANF and found similar treatment entry rates for CRAFT and TEnT. This suggests that treatment entry training is sufficient for producing the best established outcome of CRAFT. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  9. Self-crafting vegetable snacks: testing the IKEA-effect in children.

    Science.gov (United States)

    Raghoebar, Sanne; van Kleef, Ellen; de Vet, Emely

    2017-01-01

    The purpose of this paper is to test whether the IKEA-effect (Norton et al. , 2012) - better liking for self-crafted products than for identical products crafted by others - can be exploited to increase liking and consumption of vegetable snacks in children. A between-subjects experiment was conducted at an after school care facility. In total, 86 children aged four to six either crafted a peacock with vegetables or with non-food objects following an example. After the task, children ate snack vegetables ad libitum, and rated their liking for the vegetables and pride in crafting the peacock. No significant main effect of the vegetable snack creation on consumption and liking was observed. Also, perceived pride did not mediate the effect of self-crafting vegetable snacks on consumption of and liking for vegetables. Vegetable consumption did not differ between children who were either simply exposed to vegetable snacks while crafting or those who were crafting the vegetable snacks themselves. The equal consumption might suggest that this is caused by simple exposure, but more research is needed comparing self-crafting and exposure to a condition where there is no initial exposure to vegetables. Although the IKEA-effect has been demonstrated in adults, this is one of the first studies evaluating the IKEA-effect in children and as a means to increase liking for a generally disliked product in this target group, i.e. vegetables. The IKEA-effect could not be replicated under these more stringent conditions, where the experimental set-up enabled disentangling exposure and crafting effects.

  10. High Job Demands, Still Engaged and Not Burned Out? The Role of Job Crafting.

    Science.gov (United States)

    Hakanen, Jari J; Seppälä, Piia; Peeters, Maria C W

    2017-08-01

    Traditionally, employee well-being has been considered as resulting from decent working conditions arranged by the organization. Much less is known about whether employees themselves can make self-initiated changes to their work, i.e., craft their jobs, in order to stay well, even in highly demanding work situations. The aim of this study was to use the job demands-resources (JD-R model) to investigate whether job crafting buffers the negative impacts of four types of job demands (workload, emotional dissonance, work contents, and physical demands) on burnout and work engagement. A questionnaire study was designed to examine the buffering role of job crafting among 470 Finnish dentists. All in all, 11 out of 16 possible interaction effects of job demands and job crafting on employee well-being were significant. Job crafting particularly buffered the negative effects of job demands on burnout (7/8 significant interactions) and to a somewhat lesser extent also on work engagement (4/8 significant interactions). Applying job crafting techniques appeared to be particularly effective in mitigating the negative effects of quantitative workload (4/4 significant interactions). By demonstrating that job crafting can also buffer the negative impacts of high job demands on employee well-being, this study contributed to the JD-R model as it suggests that job crafting may even be possible under high work demands, and not only in resourceful jobs, as most previous studies have indicated. In addition to the top-down initiatives for improving employee well-being, bottom-up approaches such as job crafting may also be efficient in preventing burnout and enhancing work engagement.

  11. Arts and Crafts Classes in Years I–III, Based on Methods Featuring Pupils’ Practical Activities

    OpenAIRE

    Piwowarska, Ewa

    2016-01-01

    The issue to be analysed here concerns teachers’ planning of arts and crafts classes in Years I–III, with specific reference to methods featuring pupils’ practical activities. A theoretical part briefly presents the concepts involved in teaching a subject that was initially defined as drawing, then as arts and crafts education, and finally as arts and crafts classes. It points out the factors that influence the process of stimulating pupils’ artistic activities. The technique used in the cour...

  12. Use your eyes - metallographic versus superficial traces of the crafting of Bronze Age ornaments

    DEFF Research Database (Denmark)

    Nørgaard, Heide Wrobel

    and superficial archaeological examinations can be used to understand prehistoric craft. Furthermore, it will show that with an intensive knowledge about previous scientific investigations the superficial traces preserved can reveal a great amount of information and could talk for themselves. Taking as an example...... the early and middle Bronze Age bronze ornaments from North Germany, superficial traces of the metal crafting process, visible with the naked eye, will be compared with metallographic images. The aim of this presentation is to give an overview over the crafting traces everybody could see (with a bit...

  13. The effects of job crafting on subjective well-being amongst South African high school teachers

    Directory of Open Access Journals (Sweden)

    Sergio Peral

    2016-09-01

    Full Text Available Orientation: Job crafting can result in a number of positive outcomes for teachers, such as increased meaningfulness and engagement at work. Increased work engagement and psychological meaningfulness may yield positive benefits for the practice of teaching, thus highlighting the pivotal role of job crafting. Research purpose: The study’s aim was to investigate the relationship between job crafting and subjective well-being amongst South African high school teachers. Subjective well-being comprises psychological meaningfulness and work engagement. The potential mediating effect that psychological meaningfulness had on this relationship was further explored. Motivation for the study: Being in a highly stressful occupation, teachers need to continuously find ways to craft their working practices in order to deal effectively with their job demands and to capitalise on their available job resources. Furthermore, South Africa’s current education system calls for serious proactive measures to be taken to improve and rectify the current status, such as job crafting. Research approach, design and method: A quantitative, cross-sectional survey design was used and administered to a sample of South African high school teachers situated in Gauteng, South Africa (N = 251. Main findings: A positive relationship was found between job crafting (increasing structural resources and challenging job demands and work engagement. Furthermore, psychological meaningfulness mediated the relationship between job crafting and work engagement amongst the sampled high school teachers. Practical/managerial implications: Teachers who craft their work to better suit their preferences and needs will obtain greater meaning in their work and experience increased levels of work engagement. Training programmes and/or group-based interventions targeted around job crafting techniques may be particularly useful in the South African teaching context. Contribution/value-add: This

  14. Taking control: Is job crafting related to the intention to leave surgical training?

    Science.gov (United States)

    Dominguez, Luis Carlos; Stassen, Laurents; de Grave, Willem; Sanabria, Alvaro; Alfonso, Edgar; Dolmans, Diana

    2018-01-01

    The intention to leave surgical training, hereinafter referred as proxy of "attrition," is associated with poor well-being in the workplace. Attrition is suggested to diminish when residents possess job-crafting skills, that is, the ability to redefine their job in meaningful ways and maximize well-being at work by increasing structural and social resources and challenges and decreasing hindering demands. However, the evidence supporting this relationship is scant. This study sought to: 1) investigate to what extent residents possess job-crafting skills and compare residents' levels of job-crafting skills across years of residency training; 2) investigate the relationship between job crafting, well-being as measured by burnout and work-engagement rates, and the intention to leave; and 3) compare the levels of job-crafting skills and well-being between residents with and without serious intentions to leave. This cross sectional study was conducted in fifteen residency programs in Colombia. Surgical residents completed different questionnaires including the Dutch Job Crafting Scale (DJCS), MBI-Human Services Survey (MBI-HSS), Utrecht Work Engagement Scale (UWES-17) and an adapted version of the Nurse Turnover Intention Scale (NTIS). The objectives were addressed by independent analyses of variance (ANOVA), structural equation modeling techniques (SEM) and independent t-tests, respectively. A total of 202 residents participated. Residents generally scored high on their job-crafting skills to increase structural and social resources as well as challenging demands, but were less positive about their skills to reduce hindering demands. No differences across years of training were found. Job crafting correlated positively with work-engagement, which was inversely related to the intention to leave. Conversely, job crafting correlated negatively with burnout, which bore a positive relationship to the intention to leave. Residents with serious intentions to leave exhibited

  15. Preservation of Cultural Heritage Embodied in Traditional Crafts in the Developing Countries. A Case Study of Pakistani Handicraft Industry

    Directory of Open Access Journals (Sweden)

    Yongzhong Yang

    2018-04-01

    Full Text Available Cultural heritage embodied in traditional crafts is an integral part of any nation which reflects the culture and tradition of a particular region. Although the importance of handicraft has been widely recognized, the literature regarding preservation of traditional craft is scarce. The present paper aimed to explore and identify issues faced by traditional craftsmanship in developing countries and to address those issues in order to contribute to the sustainability of traditional craft heritage and ensure continuous transmission of craft skills and knowledge from generation to generation. Our study identified several key issues which poses substantial challenges to the preservation of traditional craft heritage in developing countries. In order to add empirical evidence, we examined the case of Pakistani handicraft industry that provided further understanding of highlighted issues which traditional craft heritage face. We have suggested some policies to promote, develop and preserve the traditional craft heritage. The significance of these policy suggestions is underlined with the case study of Pakistan.

  16. Summary of transient analysis

    International Nuclear Information System (INIS)

    Saha, P.

    1984-01-01

    This chapter reviews the papers on the pressurized water reactor (PWR) and boiling water reactor (BWR) transient analyses given at the American Nuclear Society Topical Meeting on Anticipated and Abnormal Plant Transients in Light Water Reactors. Most of the papers were based on the systems calculations performed using the TRAC-PWR, RELAP5 and RETRAN codes. The status of the nuclear industry in the code applications area is discussed. It is concluded that even though comprehensive computer codes are available for plant transient analysis, there is still a need to exercise engineering judgment, simpler tools and even hand calculations to supplement these codes

  17. 25 CFR 309.9 - When can non-Indians make and sell products in the style of Indian arts and crafts?

    Science.gov (United States)

    2010-04-01

    ... of Indian arts and crafts? 309.9 Section 309.9 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR PROTECTION OF INDIAN ARTS AND CRAFTS PRODUCTS § 309.9 When can non-Indians make and sell products in the style of Indian arts and crafts? A non-Indian can make and sell products in the style of...

  18. 25 CFR 309.1 - How do the regulations in this part carry out the Indian Arts and Crafts Act of 1990?

    Science.gov (United States)

    2010-04-01

    ... Arts and Crafts Act of 1990? 309.1 Section 309.1 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR PROTECTION OF INDIAN ARTS AND CRAFTS PRODUCTS § 309.1 How do the regulations in this part carry out the Indian Arts and Crafts Act of 1990? These regulations define the nature and Indian origin...

  19. Transient particle emission measurement with optical techniques

    Science.gov (United States)

    Bermúdez, Vicente; Luján, José M.; Serrano, José R.; Pla, Benjamín

    2008-06-01

    Particulate matter is responsible for some respiratory and cardiovascular diseases. In addition, it is one of the most important pollutants of high-speed direct injection (HSDI) passenger car engines. Current legislation requires particulate dilution tunnels for particulate matter measuring. However for development work, dilution tunnels are expensive and sometimes not useful since they are not able to quantify real-time particulate emissions during transient operation. In this study, the use of a continuous measurement opacimeter and a fast response HFID is proven to be a good alternative to obtain instantaneous particle mass emissions during transient operation (due to particulate matter consisting mainly of soot and SOF). Some methods and correlations available from literature, but developed for steady conditions, are evaluated during transient operation by comparing with mini-tunnel measurements during the entire MVEG-A transient cycle. A new correlation was also derived from this evaluation. Results for soot and SOF (obtained from the new correlation proposed) are compared with soot and SOF captured with particulate filters, which have been separated by means of an SOF extraction method. Finally, as an example of ECU design strategies using these sort of correlations, the EGR valve opening is optimized during transient operation. The optimization is performed while simultaneously taking into account instantaneous fuel consumption, particulate emissions (calculated with the proposed correlation) and other regulated engine pollutants.

  20. PWR systems transient analysis

    International Nuclear Information System (INIS)

    Kennedy, M.F.; Peeler, G.B.; Abramson, P.B.

    1985-01-01

    Analysis of transients in pressurized water reactor (PWR) systems involves the assessment of the response of the total plant, including primary and secondary coolant systems, steam piping and turbine (possibly including the complete feedwater train), and various control and safety systems. Transient analysis is performed as part of the plant safety analysis to insure the adequacy of the reactor design and operating procedures and to verify the applicable plant emergency guidelines. Event sequences which must be examined are developed by considering possible failures or maloperations of plant components. These vary in severity (and calculational difficulty) from a series of normal operational transients, such as minor load changes, reactor trips, valve and pump malfunctions, up to the double-ended guillotine rupture of a primary reactor coolant system pipe known as a Large Break Loss of Coolant Accident (LBLOCA). The focus of this paper is the analysis of all those transients and accidents except loss of coolant accidents

  1. Transients: The regulator's view

    International Nuclear Information System (INIS)

    Sheron, B.W.; Speis, T.P.

    1984-01-01

    This chapter attempts to clarify the basis for the regulator's concerns for transient events. Transients are defined as both anticipated operational occurrences and postulated accidents. Recent operational experience, supplemented by improved probabilistic risk analysis methods, has demonstrated that non-LOCA transient events can be significant contributors to overall risk. Topics considered include lessons learned from events and issues, the regulations governing plant transients, multiple failures, different failure frequencies, operator errors, and public pressure. It is concluded that the formation of Owners Groups and Regulatory Response Groups within the owners groups are positive signs of the industry's concern for safety and responsible dealing with the issues affecting both the US NRC and the industry

  2. Transient multivariable sensor evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Vilim, Richard B.; Heifetz, Alexander

    2017-02-21

    A method and system for performing transient multivariable sensor evaluation. The method and system includes a computer system for identifying a model form, providing training measurement data, generating a basis vector, monitoring system data from sensor, loading the system data in a non-transient memory, performing an estimation to provide desired data and comparing the system data to the desired data and outputting an alarm for a defective sensor.

  3. Ultra-fast X-ray absorption spectroscopy for the study of matter in transient regime; Spectroscopie d'absorption ultra-rapide de rayonnement X pour l'etude de la matiere en regime transitoire

    Energy Technology Data Exchange (ETDEWEB)

    Lecherbourg, L

    2007-12-15

    In this work, we study the physics of dense matter, plasmas or solids, using X-ray absorption spectroscopy. Through the use of sources produced by laser-matter interaction, we have measured the absorption spectra of aluminum and bromine plasmas, as well as those of vanadium dioxide (VO{sub 2}). The measurement of absorption coefficients allows us to probe the dense matter and to study its properties. The experiments are carried out following the same principle: they use the same experimental set-up, called pump-probe. When the matter is dense, the absorption properties of an atom are modified by the surrounding environment. In a plasma, it is mainly the bound- bound transitions which are altered: the shapes of those spectral rays are modified. In a solid, the position of the neighbouring atoms in relation to the absorbing atom modify the structure of absorption levels (bound-free transition). The study of this structure allows us to measure the parameters of the material, and provides information such as the state of the electronic band or the interatomic gaps. The experiments carried out at the LULI have allowed us to probe plasmas in the relatively unknown regime of the Warm Dense Matter. One of the key parameters is that the plasma is characterised independently (FDI diagnostic). It allows for a better comparison of the measured absorption against a calculation made with the numerical model OPA-S. The experiments carried out at INRS have led to the realisation of an experimental system having the characteristics which allow the study of the dynamics of solids showing ultra-fast phase transition. For those experiments, we have used vanadium dioxide as a model system allowing us to test the feasibility of the method. (author)

  4. SCANAIR: A transient fuel performance code

    International Nuclear Information System (INIS)

    Moal, Alain; Georgenthum, Vincent; Marchand, Olivier

    2014-01-01

    Highlights: • Since the early 1990s, the code SCANAIR is developed at IRSN. • The software focuses on studying fast transients such as RIA in light water reactors. • The fuel rod modelling is based on a 1.5D approach. • Thermal and thermal-hydraulics, mechanical and gas behaviour resolutions are coupled. • The code is used for safety assessment and integral tests analysis. - Abstract: Since the early 1990s, the French “Institut de Radioprotection et de Sûreté Nucléaire” (IRSN) has developed the SCANAIR computer code with the view to analysing pressurised water reactor (PWR) safety. This software specifically focuses on studying fast transients such as reactivity-initiated accidents (RIA) caused by possible ejection of control rods. The code aims at improving the global understanding of the physical mechanisms governing the thermal-mechanical behaviour of a single rod. It is currently used to analyse integral tests performed in CABRI and NSRR experimental reactors. The resulting validated code is used to carry out studies required to evaluate margins in relation to criteria for different types of fuel rods used in nuclear power plants. Because phenomena occurring during fast power transients are complex, the simulation in SCANAIR is based on a close coupling between several modules aimed at modelling thermal, thermal-hydraulics, mechanical and gas behaviour. During the first stage of fast power transients, clad deformation is mainly governed by the pellet–clad mechanical interaction (PCMI). At the later stage, heat transfers from pellet to clad bring the cladding material to such high temperatures that the boiling crisis might occurs. The significant over-pressurisation of the rod and the fact of maintaining the cladding material at elevated temperatures during a fairly long period can lead to ballooning and possible clad failure. A brief introduction describes the context, the historical background and recalls the main phenomena involved under

  5. SCANAIR: A transient fuel performance code

    Energy Technology Data Exchange (ETDEWEB)

    Moal, Alain, E-mail: alain.moal@irsn.fr; Georgenthum, Vincent; Marchand, Olivier

    2014-12-15

    Highlights: • Since the early 1990s, the code SCANAIR is developed at IRSN. • The software focuses on studying fast transients such as RIA in light water reactors. • The fuel rod modelling is based on a 1.5D approach. • Thermal and thermal-hydraulics, mechanical and gas behaviour resolutions are coupled. • The code is used for safety assessment and integral tests analysis. - Abstract: Since the early 1990s, the French “Institut de Radioprotection et de Sûreté Nucléaire” (IRSN) has developed the SCANAIR computer code with the view to analysing pressurised water reactor (PWR) safety. This software specifically focuses on studying fast transients such as reactivity-initiated accidents (RIA) caused by possible ejection of control rods. The code aims at improving the global understanding of the physical mechanisms governing the thermal-mechanical behaviour of a single rod. It is currently used to analyse integral tests performed in CABRI and NSRR experimental reactors. The resulting validated code is used to carry out studies required to evaluate margins in relation to criteria for different types of fuel rods used in nuclear power plants. Because phenomena occurring during fast power transients are complex, the simulation in SCANAIR is based on a close coupling between several modules aimed at modelling thermal, thermal-hydraulics, mechanical and gas behaviour. During the first stage of fast power transients, clad deformation is mainly governed by the pellet–clad mechanical interaction (PCMI). At the later stage, heat transfers from pellet to clad bring the cladding material to such high temperatures that the boiling crisis might occurs. The significant over-pressurisation of the rod and the fact of maintaining the cladding material at elevated temperatures during a fairly long period can lead to ballooning and possible clad failure. A brief introduction describes the context, the historical background and recalls the main phenomena involved under

  6. Mechanical modelling of transient- to- failure SFR fuel cladding

    Energy Technology Data Exchange (ETDEWEB)

    Feria, F.; Herranz, L. E.

    2014-07-01

    The response of Sodium Fast Reactor (SFR) fuel rods to transient accident conditions is an important safety concern. During transients the cladding strain caused by the stress due to pellet cladding mechanical interaction (PCMI) can lead to failure. Due to the fact that SFR fuel rods are commonly clad with strengthened material made of stainless steel (SS), cladding is usually treated as an elastic-perfectly-plastic material. However, viscoplastic behaviour can contribute to mechanical strain at high temperature (> 1000 K). (Author)

  7. Legal status of crew members on pleasure craft and vessels used in nautical tourism

    Directory of Open Access Journals (Sweden)

    Giovanni Marchiafava

    2018-02-01

    Full Text Available The paper aims at examining the issues related to the legal status of crew members of pleasure craft and vessels used in nautical tourism from an Italian perspective. Firstly, the definition of crew and its composition on pleasure craft and vessels is examined. Additionally, the legal regime of crew members together with the crew on-board documentation, is discussed. Furthermore, the main similarities and dissimilarities of the crew regime according to the type of pleasure craft and vessel and their use, as well as, the on-board services, is dealt with. Finally, the issue related to the legal classification of ‘’guests’’, undertaking complementary on-board services of pleasure craft and vessels is considered.

  8. Cooking and Hammering: Primary School Pupils' Concepts of their Craft Skills

    Directory of Open Access Journals (Sweden)

    Mare MÜÜRSEPP

    2014-07-01

    Full Text Available The aim of the study is to clear the significance of craft skills for the pupils in age nine and twelve years. More than 200 pupils were asked to define, what are the most important skills for the pupils of their age. The results bring out that category of the skills related to craft subject is of the most presented categories in pupils' self description. Thus the primary school pupils essentially defined themselves by the activities they could do practically (building, cooking, repairing of things. The most undefined relation to craft activities is reflected in the answer of smaller boys in our study. A suspicion arisen from the analysis of pupils' sayings, that the craft lessons in the 1st school stage tend to be organized kind of poorly was asserted by the teachers who pointed out the need for special rooms and materials to implement different techniques.

  9. SUSTAINABLE WASTE MANAGEMENT OF TRADITIONAL CRAFT INDUSTRY IN LOPATI TOURISM VILLAGE, YOGYAKARTA

    OpenAIRE

    VITASURYA Vincentia Reni; PUDIANTI Anna

    2016-01-01

    Ecotourism has been growing in Yogyakarta that can be seen through the development of rural tourism. The development of rural tourism has positive impact to improve local community’s welfare nevertheless, it has also negative impact onto environmental carrying capacity. Lopati tourism village is located in Bantul, Yogyakarta, relying on traditional craft industry as tourism attraction. Traditional crafts are livelihood of local residents, so that environmental management efforts become part o...

  10. Investigations of Thickness Requirement in DNV Rules for High-Speed Craft

    DEFF Research Database (Denmark)

    Pedersen, Preben Terndrup; Zhang, Shengming

    1997-01-01

    Simple formulas for determining impact strength of high-speed craft collisions with floating objects are given in this note. Thereby the minimum mass of a floating object that just ruptures the shell plating is predicted. The minimum thickness requirements of DNV rules for aluminiumcrafts and GRP...... single skin crafts can be converted to critical impact energy and minimum object mass. Some comparisons show an acceptable agreement between present method and DNV test results....

  11. Job crafting, work engagement, and psychological distress among Japanese employees: a cross-sectional study.

    Science.gov (United States)

    Sakuraya, Asuka; Shimazu, Akihito; Eguchi, Hisashi; Kamiyama, Kimika; Hara, Yujiro; Namba, Katsuyuki; Kawakami, Norito

    2017-01-01

    Job crafting, an employee-initiated job design/redesign, has become important for employees' well-being. However, most studies on the relationship between job crafting and employees' well-being have been conducted in western countries; thus, it is unclear whether job crafting can be effectively applied to Asian cultures, such as Japan, which emphasizes group harmony. The aim of this study was to examine the cross-sectional associations of self-reported job crafting with work engagement and psychological distress among employees in Japan. A questionnaire survey through the internet was conducted among all employees of a manufacturing company in Japan. We analyzed the data from 894 respondents, all employees with regular employment. Job crafting, work engagement, and psychological distress were assessed using the Japanese version of the Job Crafting Questionnaire, the Japanese version of the Utrecht Work Engagement Scale (UWES), and the Brief Job Stress Questionnaire (BJSQ), respectively. Hierarchical multiple regression showed that increasing structural job resources, social job resources, and challenging job demands was significantly and positively associated with work engagement ( β  = 0.31, p  engagement and lower psychological distress. In addition, increasing social job resources and challenging job demands are also associated with higher work engagement.

  12. Purpose and pleasure in late life: Conceptualising older women's participation in art and craft activities.

    Science.gov (United States)

    Liddle, Jeannine L M; Parkinson, Lynne; Sibbritt, David W

    2013-12-01

    The fourth age, as the last stage of life, represents a final challenge to find personal meaning in the face of changing capacities, illness and disability. Participation in valued activities is important for sustaining interest in life and has been associated with enhanced health and well-being. Art and craft activities are a popular form of participation amongst women in late life with growing international interest in the potential for these types of activities to maintain health and well-being and address problems of social isolation. Drawing on open text comments from 114 women enrolled in the Australian Longitudinal Study on Women's Health and in-depth interviews with 23 women all aged in their eighties, this paper explores the nature of older women's participation in art and craft activities and conceptualises links between participation in these activities and health and well-being in late life. Participation in art and craft activities is complex and dynamic, comprising cognitive and physical processes infused with emotion and occurs in the context of social relationships, physical spaces, physical ailments and beliefs about the value of the activities. By participating in art and craft activities, older women find purpose in their lives, contributing to their subjective well-being whilst helping and being appreciated by others. They develop a self view as enabled and as such take on new art and craft challenges, continue to learn and develop as art and craft makers and remain open to new possibilities. © 2013.

  13. Job crafting among health care professionals: The role of work engagement.

    Science.gov (United States)

    Bakker, Arnold B

    2018-04-01

    The aim of this study was to examine the impact of job crafting on the quality of the work environment of health care professionals. Job crafting refers to proactive behavior aimed at optimizing the fit between person and job. Using job demands-resources theory, we hypothesized that job crafting would be positively related to job resources and person-organisation fit, and negatively to hindrance demands. Furthermore, we hypothesized that these relationships would be qualified by work engagement. A total of 5,272 health care professionals from one of 35 different organisations filled out an electronic questionnaire (response is 55%). Regression analyses were used to test hypotheses. Consistent with hypotheses, job crafting in the form of increasing job resources was positively related to opportunities for development, performance feedback and P-O fit; and negatively related to hindrance job demands - particularly when work engagement was high. The combination of job crafting and work engagement is important for the realization of a resourceful work environment and fit between person and organisation. Interventions aimed at fostering job crafting should be tailored to the motivation of health care professionals. © 2017 John Wiley & Sons Ltd.

  14. Electrical Safety Program: Nonelectrical Crafts at LANL, Live #12175

    Energy Technology Data Exchange (ETDEWEB)

    Glass, George [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-12-22

    Los Alamos National Laboratory (LANL) and the federal government require those working with or near electrical equipment to be trained on electrical hazards and how to avoid them. Although you might not be trained to work on electrical systems, your understanding of electricity, how it can hurt you, and what precautions to take when working near electricity could save you or others from injury or death. This course, Electrical Safety Program: Nonelectrical Crafts at LANL (12175), provides knowledge of basic electrical concepts, such as current, voltage, and resistance, and their relationship to each other. You will learn how to apply these concepts to safe work practices while learning about the dangers of electricity—and associated hazards—that you may encounter on the job. The course also discusses what you can do to prevent electrical accidents and what you should do in the event of an electrical emergency. The LANL Electrical Safety Program is defined by LANL Procedure (P) 101-13. An electrical safety officer (ESO) is well versed in this document and should be consulted regarding electrical questions. Appointed by the responsible line manager (RLM), ESOs can tell you if a piece of equipment or an operation is safe or how to make it safe.

  15. New Methods for Crafting Locally Decision-Relevant Scenarios

    Science.gov (United States)

    Lempert, R. J.

    2015-12-01

    Scenarios can play an important role in helping decision makers to imagine future worlds, both good and bad, different than the one with which we are familiar and to take concrete steps now to address the risks generated by climate change. At their best, scenarios can effectively represent deep uncertainty; integrate over multiple domains; and enable parties with different expectation and values to expand the range of futures they consider, to see the world from different points of view, and to grapple seriously with the potential implications of surprising or inconvenient futures. These attributes of scenario processes can prove crucial in helping craft effective responses to climate change. But traditional scenario methods can also fail to overcome difficulties related to choosing, communicating, and using scenarios to identify, evaluate, and reach consensus on appropriate policies. Such challenges can limit scenario's impact in broad public discourse. This talk will demonstrate how new decision support approaches can employ new quantitative tools that allow scenarios to emerge from a process of deliberation with analysis among stakeholders, rather than serve as inputs to it, thereby increasing the impacts of scenarios on decision making. This talk will demonstrate these methods in the design of a decision support tool to help residents of low lying coastal cities grapple with the long-term risks of sea level rise. In particular, this talk will show how information from the IPCC SSP's can be combined with local information to provide a rich set of locally decision-relevant information.

  16. Transient flow combustion

    Science.gov (United States)

    Tacina, R. R.

    1984-01-01

    Non-steady combustion problems can result from engine sources such as accelerations, decelerations, nozzle adjustments, augmentor ignition, and air perturbations into and out of the compressor. Also non-steady combustion can be generated internally from combustion instability or self-induced oscillations. A premixed-prevaporized combustor would be particularly sensitive to flow transients because of its susceptability to flashback-autoignition and blowout. An experimental program, the Transient Flow Combustion Study is in progress to study the effects of air and fuel flow transients on a premixed-prevaporized combustor. Preliminary tests performed at an inlet air temperature of 600 K, a reference velocity of 30 m/s, and a pressure of 700 kPa. The airflow was reduced to 1/3 of its original value in a 40 ms ramp before flashback occurred. Ramping the airflow up has shown that blowout is more sensitive than flashback to flow transients. Blowout occurred with a 25 percent increase in airflow (at a constant fuel-air ratio) in a 20 ms ramp. Combustion resonance was found at some conditions and may be important in determining the effects of flow transients.

  17. Analysis of Spontaneous and Nerve-Evoked Calcium Transients in Intact Extraocular Muscles in Vitro

    Science.gov (United States)

    Feng, Cheng-Yuan; Hennig, Grant W.; Corrigan, Robert D.; Smith, Terence K.; von Bartheld, Christopher S.

    2012-01-01

    Extraocular muscles (EOMs) have unique calcium handling properties, yet little is known about the dynamics of calcium events underlying ultrafast and tonic contractions in myofibers of intact EOMs. Superior oblique EOMs of juvenile chickens were dissected with their nerve attached, maintained in oxygenated Krebs buffer, and loaded with fluo-4. Spontaneous and nerve stimulation-evoked calcium transients were recorded and, following calcium imaging, some EOMs were double-labeled with rhodamine-conjugated alpha-bungarotoxin (rhBTX) to identify EOM myofiber types. EOMs showed two main types of spontaneous calcium transients, one slow type (calcium waves with 1/2max duration of 2–12 s, velocity of 25–50 μm/s) and two fast “flash-like” types (Type 1, 30–90 ms; Type 2, 90–150 ms 1/2max duration). Single pulse nerve stimulation evoked fast calcium transients identical to the fast (Type 1) calcium transients. Calcium waves were accompanied by a local myofiber contraction that followed the calcium transient wavefront. The magnitude of calcium-wave induced myofiber contraction far exceeded those of movement induced by nerve stimulation and associated fast calcium transients. Tetrodotoxin eliminated nerve-evoked transients, but not spontaneous transients. Alpha-bungarotoxin eliminated both spontaneous and nerve-evoked fast calcium transients, but not calcium waves, and caffeine increased wave activity. Calcium waves were observed in myofibers lacking spontaneous or evoked fast transients, suggestive of multiply-innervated myofibers, and this was confirmed by double-labeling with rhBTX. We propose that the abundant spontaneous calcium transients and calcium waves with localized contractions that do not depend on innervation may contribute to intrinsic generation of tonic functions of EOMs. PMID:22579493

  18. Greener Friedel-Crafts Acylation using Microwave-enhanced reactivity of Bismuth Triflate in the Friedel-Crafts Benzoylation of Aromatic Compounds with Benzoic Anhydride

    DEFF Research Database (Denmark)

    Tran, Phuong Hoang; Nguyen, Hai Truong; Hansen, Poul Erik

    2017-01-01

    An efficient and facile bismuth trifluoromethanesulfonate-catalyzed benzoylation of aromatic compounds using benzoic anhydride under solvent-free microwave irradiation has been developed. The microwave-assisted Friedel-Crafts benzoylation results in good yields within short reaction times. Bismuth...

  19. Transient hardened power FETs

    International Nuclear Information System (INIS)

    Dawes, W.R. Jr.; Fischer, T.A.; Huang, C.C.C.; Meyer, W.J.; Smith, C.S.; Blanchard, R.A.; Fortier, T.J.

    1986-01-01

    N-channel power FETs offer significant advantages in power conditioning circuits. Similiarily to all MOS technologies, power FET devices are vulnerable to ionizing radiation, and are particularily susceptible to burn-out in high dose rate irradiations (>1E10 rads(Si)/sec.), which precludes their use in many military environments. This paper will summarize the physical mechanisms responsible for burn-out, and discuss various fabrication techniques designed to improve the transient hardness of power FETs. Power FET devices were fabricated with several of these techniques, and data will be presented which demonstrates that transient hardness levels in excess of 1E12 rads(Si)/sec. are easily achievable

  20. Transients in the Vivitron

    International Nuclear Information System (INIS)

    Cooke, C.M.; Frick, G.; Roumie, M.

    1993-01-01

    Electrical measurements are presented for the construction of a model for the study of transients in the Vivitron. Observation of the transmission of electrical pulses in the porticos clearly shows transmission-line behaviour. Measurements of the vector impedance of the outer porticos show the same transmission-line properties, but also gives a description of the modification from a pure transmission line due to the circular electrodes. The results of this investigation should allow the construction of a computer model which predicts the evolution of the transients in the case of a spark in the Vivitron. (orig.)

  1. Predicting Job Crafting From the Socially Embedded Perspective: The Interactive Effect of Job Autonomy, Social Skill, and Employee Status

    OpenAIRE

    Sekiguchi, Tomoki; Li, Jie; Hosomi, Masaki

    2017-01-01

    Job crafting represents the bottom-up process of change employees make in their work boundaries and plays an important role in the management of organizational change. Following the socially embedded perspective, we examine the roles of job autonomy, social skill, and employee status in predicting job crafting. Study 1 with a sample of 509 part-time employees found that job autonomy and social skill not only directly but also interactively influenced job crafting. Study 2 with a sample of 564...

  2. Effects of a job crafting intervention program on work engagement among Japanese employees: a pretest-posttest study

    OpenAIRE

    Sakuraya, Asuka; Shimazu, Akihito; Imamura, Kotaro; Namba, Katsuyuki; Kawakami, Norito

    2016-01-01

    Abstract Background Job crafting, an employee-initiated job design/redesign, has become important for employees’ well-being such as work engagement. This study examined the effectiveness of a newly developed job crafting intervention program on work engagement (as primary outcome), as well as job crafting and psychological distress (as secondary outcomes), using a pretest-posttest study design among Japanese employees. Methods Participants were managers of a private company and a private psyc...

  3. “Making our job hospitable” – Assessment of job-crafting behavior among dental academic faculty in South India

    Directory of Open Access Journals (Sweden)

    V Siva Kalyan

    2018-01-01

    Full Text Available Introduction: Employees are regularly offered opportunities to make their work more appealing and rewarding. These opportunities might be as simple as making fine changes to their daily tasks to boost happiness and to connect with more people at vocation. Hence, an attempt is made to assess job-crafting behavior among the dental academic faculty. Materials and Methods: A cross-sectional study was conducted among dental academic faculty from five dental colleges. Job Crafting Questionnaire (JCQ was used to assess the job-crafting behavior. Mean scores were calculated for different domains of JCQ. Gender differences were analyzed using Student's “t-” test and one-way ANOVA to test the difference between different academic positions of the faculty members. Results: A total of 228 dental faculty members with a mean age of 34.43 ± 6.13 years participated in the study. The mean value of job-crafting behavior was found to be highest among female faculty (60.07 ± 8.38 and professors (61.35 ± 8.30. Male faculty scored higher in task-crafting domain and female faculty scored higher in both cognitive- and relational-crafting domains. The professors scored highest in all the three domains of job-crafting behavior as compared to that of senior lecturers and readers. Conclusion: Job crafting is an effectual workplace intervention, where employees assume an active role in shaping their work experience to enhance their job satisfaction and well-being. The overall score of job-crafting behavior was found to be highest among both professors and female faculty members. Male faculty members scored higher in task-crafting domain. With regard to individual domains, the participants scored highest in cognitive crafting followed by task and relational crafting.

  4. Different types of employee well-being across time and their relationships with job crafting.

    Science.gov (United States)

    Hakanen, Jari J; Peeters, Maria C W; Schaufeli, Wilmar B

    2018-04-01

    We used and integrated the circumplex model of affect (Russell, 1980) and the conservation of resources theory (Hobfoll, 1998) to hypothesize how various types of employee well-being, which can be differentiated on theoretical grounds (i.e., work engagement, job satisfaction, burnout, and workaholism), may differently predict various job crafting behaviors (i.e., increasing structural and social resources and challenging demands, and decreasing hindering demands) and each other over time. At Time 1, we measured employee well-being, and 4 years later at Time 2, job crafting and well-being, using a large sample of Finnish dentists (N = 1,877). The results of structural equation modeling showed that (a) work engagement positively predicted both types of increasing resources and challenging demands and negatively predicted decreasing hindering demands; (b) workaholism positively predicted increasing structural resources and challenging demands; (c) burnout positively predicted decreasing hindering demands and negatively predicted increasing structural resources, whereas (d) job satisfaction did not relate to job crafting over time; and (e) work engagement positively influenced job satisfaction and negatively influenced burnout, whereas (f) workaholism predicted burnout after controlling for baseline levels. Thus, work engagement was a stronger predictor of future job crafting and other types of employee well-being than job satisfaction. Although workaholism was positively associated with job crafting, it also predicted burnout. We conclude that the relationship between job crafting and employee well-being may be more complex than assumed, because the way in which employees will craft their jobs in the future seems to depend on how they currently feel. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

  5. Leader–member exchange fosters work engagement: The mediating role of job crafting

    Directory of Open Access Journals (Sweden)

    Mirjam Radstaak

    2017-09-01

    Full Text Available Orientation: The right balance between job demands and job resources are essential for employees to bring energy and enthusiasm to work. Employees who experience high-quality relationships with their supervisors may actively craft their job demands and job resources and feel more engaged. Research purpose: The current study examined the associations between leader–member exchange (LMX, job crafting and work engagement. Motivation: This study attempts to gain more insight in the associations between LMX, job crafting and work engagement. It was hypothesised that high-quality relationships with supervisors fosters work engagement because it stimulates employees to craft their jobs by increasing social and structural job resources and challenging job demands and by decreasing hindering job demands. Research approach, design and methodology: Participants (N = 402 working for a leading mail and parcels company in the Netherlands completed questionnaires measuring LMX, work engagement and job crafting. Structural equation modelling was used to examine the hypotheses. Main findings: Increasing social job resources (β = 0.01, SE = 0.00, p < 0.001 and increasing challenging job demands (β = 0.08, SE = 0.04, p < 0.05 were significant mediators in the association between LMX and work engagement. Increasing structural job resources (β = 0.00, SE = 0.00, p = 0.92 and decreasing hindering job demands (β = -0.00, SE 0.00, p = 0.09 were not significant mediators. Practical and managerial implications: Supervisors who are capable of building high-quality relationships with their employees based on trust, respect and loyalty will foster a positive, fulfilling work-related state of mind among employees because they are more willing to proactively craft a challenging and resourceful work environment. Contribution or value-add: The findings of this study showed the importance of high-quality relationships with supervisors and were unique in examining the

  6. Crafting an International Study of Students' Conceptual Understanding of Astronomy

    Science.gov (United States)

    Slater, Stephanie; Bretones, P. S.; McKinnon, D.; Schleigh, S.; Slater, T. F.; Astronomy, Center; Education Research, Physics

    2013-01-01

    Large international investigations into the learning of science, such as the TIMSS and PISA studies, have been enlightening with regard to effective instructional practices. Data from these studies revealed weaknesses and promising practices within nations' educational systems, with evidence to suggest that these studies have led to international reforms in science education. However, these reforms have focused on the general characteristics of teaching and learning across all sciences. While extraordinarily useful, these studies have provided limited insight for any given content domain. To date, there has been no systematic effort to measure individual's conceptual astronomy understanding across the globe. This paper describes our motivations for a coordinated, multinational study of astronomy understanding. First, reformed education is based upon knowing the preexisting knowledge state of our students. The data from this study will be used to assist international astronomy education and public outreach (EPO) professionals in their efforts to improve practices across global settings. Second, while the US astronomy EPO community has a long history of activity, research has established that many practices are ineffective in the face of robust misconceptions (e.g.: seasons). Within an international sample we hope to find subpopulations that do not conform to our existing knowledge of student misconceptions, leading us to cultural or educational practices that hint at alternative, effective means of instruction. Finally, it is our hope that this first venture into large-scale disciplinary collaboration will help us to craft a set of common languages and practices, building capacity and leading toward long-term cooperation across the international EPO community. This project is sponsored and managed by the Center for Astronomy & Physics Education Research (CAPER), in collaboration with members of the International Astronomical Union-Commission 46. We are actively

  7. Transient Heat Conduction

    DEFF Research Database (Denmark)

    Rode, Carsten

    1998-01-01

    Analytical theory of transient heat conduction.Fourier's law. General heat conducation equation. Thermal diffusivity. Biot and Fourier numbers. Lumped analysis and time constant. Semi-infinite body: fixed surface temperature, convective heat transfer at the surface, or constant surface heat flux...

  8. Transient cavitation in pipelines

    NARCIS (Netherlands)

    Kranenburg, C.

    1974-01-01

    The aim of the present study is to set up a one-dimensional mathematical model, which describes the transient flow in pipelines, taking into account the influence of cavitation and free gas. The flow will be conceived of as a three-phase flow of the liquid, its vapour and non-condensible gas. The

  9. Work plan: transient release from LMFBR fuel

    International Nuclear Information System (INIS)

    Kress, T.S.; Parker, G.W.; Fontana, M.H.

    1975-09-01

    The proposed LMFBR Transient Release Program at ORNL is designed to investigate, by means of ex-reactor experiments and analytical modeling, the release and transport of fuel, fission products, and transuranic elements from fast reactor cores in the event of certain hypothetical accidents. It is desired to experimentally produce energy depositions that are characteristic of severe hypothetical reactor transients by the application of direct electrical current to mixed-oxide fuels under sodium. The experimental program includes tests with and without sodium, investigations of alternative methods of generating fuel and sodium aerosols, the use of UO 2 as a fuel simulant, additions of tracers as fission product simulants, effects of radiation, and under-water and under-sodium efforts to study the behavior of the vapor bubble itself. Analytical modeling will accompany all phases of the program, and the data will be correlated with models developed. 21 references. (auth)

  10. Transient failure behavior of HT9

    International Nuclear Information System (INIS)

    Huang, F.H.

    1994-07-01

    Alloy HT9 has-been chosen as candidate materials for fast and fusion reactor applications because the.material exhibits excellent resistance to void swelling. However, ferritic alloys are known to undergo a ductile-brittle transition as the test temperature is decreased. This inherent problem has limited their applications to reactor component materials subjected to low neutron exposures. Despite the ductile-brittle transition problem, results show that the materials exhibit superior resistance to fracture under very high neutron fluences at irradiation temperatures above 380C. Results also show that the transient behavior for HT9 cladding specimens taken from the fuel column region and cladding taken from outside the fuel column or unirradiated cladding are the same. HT9 cladding maintained its transient strength with irradiation to a fluence of 9 x 10 22 n/cm 2 (E > 0.1 MeV)

  11. Plant dynamics and safety analysis of fast breeder reactors

    International Nuclear Information System (INIS)

    Ertel, V.

    1982-01-01

    Some general features of sodium cooled fast breeders which influence the thermohydraulics and differ from LWR'S are discussed. Using the SNR-300 as a reference, some thermohydraulic transients from normal operation and from design accidents are presented. (orig.)

  12. Compressive Transient Imaging

    KAUST Repository

    Sun, Qilin

    2017-04-01

    High resolution transient/3D imaging technology is of high interest in both scientific research and commercial application. Nowadays, all of the transient imaging methods suffer from low resolution or time consuming mechanical scanning. We proposed a new method based on TCSPC and Compressive Sensing to achieve a high resolution transient imaging with a several seconds capturing process. Picosecond laser sends a serious of equal interval pulse while synchronized SPAD camera\\'s detecting gate window has a precise phase delay at each cycle. After capturing enough points, we are able to make up a whole signal. By inserting a DMD device into the system, we are able to modulate all the frames of data using binary random patterns to reconstruct a super resolution transient/3D image later. Because the low fill factor of SPAD sensor will make a compressive sensing scenario ill-conditioned, We designed and fabricated a diffractive microlens array. We proposed a new CS reconstruction algorithm which is able to denoise at the same time for the measurements suffering from Poisson noise. Instead of a single SPAD senor, we chose a SPAD array because it can drastically reduce the requirement for the number of measurements and its reconstruction time. Further more, it not easy to reconstruct a high resolution image with only one single sensor while for an array, it just needs to reconstruct small patches and a few measurements. In this thesis, we evaluated the reconstruction methods using both clean measurements and the version corrupted by Poisson noise. The results show how the integration over the layers influence the image quality and our algorithm works well while the measurements suffer from non-trival Poisson noise. It\\'s a breakthrough in the areas of both transient imaging and compressive sensing.

  13. Automatic Generation of the Planning Tunnel High Speed Craft Hull Form

    Institute of Scientific and Technical Information of China (English)

    Morteza Ghassabzadeh; Hassan Ghassemi

    2012-01-01

    The creation of geometric model of a ship to determine the characteristics of hydrostatic and hydrodynamic,and also for structural design and equipments arrangement are so important in the ship design process.Planning tunnel high speed craft is one of the crafts in which,achievement to their top speed is more important.These crafts with the use of tunnel have the aero-hydrodynamics properties to diminish the resistance,good sea-keeping behavior,reduce slamming and avoid porpoising.Because of the existence of the tunnel,the hull form generation of these crafts is more complex and difficult.In this paper,it has attempted to provide a method based on geometry creation guidelines and with an entry of the least control and hull form adjustment parameters,to generate automatically the hull form of planning tunnel craft.At first,the equations of mathematical model are described and subsequent,three different models generated based on present method are compared and analyzed.Obviously,the generated model has more application in the early stages of design.

  14. Job crafting and its impact on work engagement and job satisfaction in mining and manufacturing

    Directory of Open Access Journals (Sweden)

    Leon T de Beer

    2016-09-01

    Full Text Available The purpose of this study was to investigate job crafting and its relationship with work engagement and job satisfaction within the South African context. This research is important as job crafting has been shown to have a positive influence on employee motivation. A cross-sectional survey design was used to collect primary data from organisations in the mining and manufacturing industries of South Africa (N = 470. The results of multi-group structural equation modelling showed that the original four-factor structure of the job crafting scale was supported by the data, but that a three-factor structure was necessary due to a discriminant validity concern regarding two job crafting dimensions. Regression results revealed that increasing structural job resources with challenging job demands, and increasing social job resources were significant predictors of work engagement in both groups. Contrary to expectations decreasing hindering job demands was a negative predictor of job satisfaction in the mining group. Furthermore, increasing social job resources was also a significant predictor of job satisfaction in both groups. This study indicates the importance of job crafting for work engagement and job satisfaction in organisations.

  15. Alternative theoretical and methodological approaches for exploring higher education in Art and Crafts

    Directory of Open Access Journals (Sweden)

    Marte Sørebø Gulliksen

    2009-12-01

    Full Text Available This article presents and discusses approaches for exploring higher education in Art and Crafts. The concepts exploring versus research and the different foci in an insider perspective versus an outsider perspective introduces the theme. An insider perspective is said to be a useful starting point for inquiry, referring to Frayling’s trichotomy research into, research on and research through from 1993. The field of higher education in Art and Crafts education is shortly presented as comprising two main areas of knowledge: knowledge of education, and knowledge about the different subject areas within Art and Crafts. Both theory and practice are a part of these areas of knowledge. As higher education in Art and Crafts is a making profession, the most prominent challenge when exploring this today is thus said to be to develop research based knowledge on Education in Art and Crafts as a making discipline.  Two keywords are deemed to be useful in approaching this theme: Mode 2 knowledge production and transdisciplinarity. The article concludes with describing specific ways of doing this today from within the context of application. Two examples of large research projects in Scandinavia are presented as examples of such projects.

  16. ATWS: a reappraisal. Part 3. Frequency of anticipated transients

    International Nuclear Information System (INIS)

    McClymont, A.S.; Poehlman, B.W.

    1982-01-01

    This document is the first revision of Part 3 of the EPRI study of the anticipated transients without scram question. This revision includes an update of events at nuclear power plants which had led to fast reactor shutdowns (scrams). The purpose of this document is to present the nuclear power plant operating experience, reflecting the frequency of these events identified by their principal characteristics

  17. Transient neutrons flux behaviour in a spherical reactor core

    International Nuclear Information System (INIS)

    Souza, A.W.A. de.

    1978-11-01

    This work studies the transient neutron flux in a fast reactor of spherical geometry. The burning of U 235 nuclei is equated and two kinds of reflector were studied. The numeric solutions are then compared with the results for those reflectors. (author) [pt

  18. Observations of fast, transient gamma-ray phenomena

    International Nuclear Information System (INIS)

    Kouveliotou, C.

    1981-09-01

    The present work is devoted primarily to the study of the solar GRBs as seen by the ISEE-3 satellite, in the energy range between 100 keV and 6.5 MeV. We have also included the cosmic GRB observations from ISEE-3, as a direct comparison for the two phenomena. Thus this thesis comprises 7 chapters: introduction, a chapter providing information on the instruments used, a discussion on the physics of the gamma-ray emission, a chapter describing the cosmic GRBs, and a chapter analysing the solar ones. Finally, we give the conclusions and a summary of our results and indications for the future observations. (orig./WL)

  19. Observations of fast, transient gamma-ray phenomena

    International Nuclear Information System (INIS)

    Kouveliotou, C.

    1981-01-01

    The present work is devoted primarily to the study of the solar GRBs as seen by the ISEE-3 satellite, in the energy range between 100 keV and 6.5 MeV. We have also included the cosmic GRB observations from ISEE-3, as a direct comparison for the two phenomena. Thus this thesis comprises 7 chapters: introduction, a chapter providing information on the instruments used, a discussion on the physics of the gamma-ray emission, a chapter describing the cosmic GRBs, and a chapter analysing the solar ones. Finally, we give the conclusions and a summary of our results and indications for the future observations. (orig./UPO)

  20. Fast Radio Bursts and Radio Transients from Black Hole Batteries

    OpenAIRE

    Mingarelli, Chiara M. F.; Levin, Janna; Lazio, T. Joseph W.

    2015-01-01

    Most black holes (BHs) will absorb a neutron star (NS) companion fully intact without tidal disruption, suggesting the pair will remain dark to telescopes. Even without tidal disruption, electromagnetic (EM) luminosity is generated from the battery phase of the binary when the BH interacts with the NS magnetic field. Originally, the luminosity was expected to be in high-energy X-rays or gamma-rays, however, we conjecture that some of the battery power is emitted in the radio bandwidth. While ...

  1. Fluid transient analysis and design considerations in TVA PWR feedwater systems and steam generators

    International Nuclear Information System (INIS)

    Kelley, B.T.

    1979-01-01

    TVA has evaluated a number of fluid transients in an effort to discover areas of potential problems and to improve overall unit operation. The transients recently or currently being evaluated fall into four major areas - accident analyses, fast valving, heater drain systems, and steam generators. A discussion of each area follows

  2. Search for transient gravitational waves in coincidence with short-duration radio transients during 2007-2013

    NARCIS (Netherlands)

    Abbott, B. P.; Abbott, R.; Abbott, T. D.; Abernathy, M. R.; Acernese, F.; Ackley, K.; Adams, C.; Phythian-Adams, A.T.; Addesso, P.; Adhikari, R. X.; Adya, V. B.; Affeldt, C.; Agathos, M.; Agatsuma, K.; Aggarwal, N.T.; Aguiar, O. D.; Aiello, L.; Ain, A.; Ajith, P.; Allen, B.; Allocca, A.; Altin, P. A.; Anderson, S. B.; Anderson, W. G.; Arai, K.; Araya, M. C.; Arceneaux, C. C.; Areeda, J. S.; Arnaud, N.; Arun, K. G.; Ascenzi, S.; Ashton, G.; Ast, M.; Aston, S. M.; Astone, P.; Aufmuth, P.; Aulbert, C.; Babak, S.; Bacon, P.; Bader, M. K. M.; Baker, P. T.; Baldaccini, F.; Ballardin, G.; Ballmer, S. W.; Barayoga, J. C.; Barclay, S. E.; Barish, B. C.; Barker, R.D.; Barone, F.; Barr, B.; Barsotti, L.; Barsuglia, M.; Barta, D.; Bartlett, J.; Bartos, I.; Bassiri, R.; Basti, A.; Batch, J. C.; Baune, C.; Bavigadda, V.; Bazzan, M.; Behnke, B.; Bejger, M.; Bell, A. S.; Bell, C. J.; Berger, B. K.; Bergman, J.; Bergmann, G.; Berry, C. P. L.; Bersanetti, D.; Bertolini, A.; Betzwieser, J.; Bhagwat, S.; Bhandare, R.; Bilenko, I. A.; Billingsley, G.; Birch, M.J.; Birney, R.; Biscans, S.; Bisht, A.; Bitossi, M.; Biwer, C.; Bizouard, M. A.; Blackburn, J. K.; Blair, C. D.; Blair, D. G.; Blair, R. M.; Bloemen, A.L.S.; Bock, O.; Bodiya, T. P.; Boer, M.; Bogaert, J.G.; Bogan, C.; Bohe, A.; Bojtos, P.; Bond, T.C; Bondu, F.; Bonnand, R.; Boom, B. A.; Bork, R.; Boschi, V.; Bose, S.; Bouffanais, Y.; Bozzi, A.; Bradaschia, C.; Brady, P. R.; Braginsky, V. B.; Branchesi, M.; Brau, J. E.; Briant, T.; Brillet, A.; Brinkmann, M.; Brisson, V.; Brockill, P.; Brooks, A. F.; Brown, A.D.; Brown, D.; Brown, N. M.; Buchanan, C. C.; Buikema, A.; Bulik, T.; Bulten, H. J.; Buonanno, A.; Buskulic, D.; Buy, C.; Byer, R. L.; Cadonati, L.; Cagnoli, G.; Cahillane, C.; Calderon Bustillo, J.; Callister, T. A.; Calloni, E.; Camp, J. B.; Cannon, K. C.; Cao, J.; Capano, C. D.; Capocasa, E.; Carbognani, F.; Caride, S.; Diaz, J. Casanueva; Casentini, C.; Caudill, S.; Cavaglia, M.; Cavalier, F.; Cavalieri, R.; Cella, G.; Cepeda, C. B.; Baiardi, L. Cerboni; Cerretani, G.; Cesarini, E.; Chakraborty, R.; Chalermsongsak, T.; Chamberlin, S. J.; Chan, M.; Chao, D. S.; Charlton, P.; Chassande-Mottin, E.; Chen, H. Y.; Chen, Y; Cheng, C.; Chincarini, A.; Chiummo, A.; Cho, H. S.; Cho, M.; Chow, J. H.; Christensen, N.; Chu, Qian; Chua, S. E.; Chung, E.S.; Ciani, G.; Clara, F.; Clark, J. A.; Cleva, F.; Coccia, E.; Cohadon, P. -F.; Colla, A.; Collette, C. G.; Cominsky, L.; Constancio, M., Jr.; Conte, A.; Conti, L.; Cook, D.; Corbitt, T. R.; Cornish, N.; Corsi, A.; Cortese, S.; Costa, A.C.; Coughlin, M. W.; Coughlin, S. B.; Coulon, J. -P.; Countryman, S. T.; Couvares, P.; Coward, D. M.; Cowart, M. J.; Coyne, D. C.; Coyne, R.; Craig, K.; Creighton, J. D. E.; Cripe, J.; Crowder, S. G.; Cumming, A.; Cunningham, A.L.; Cuoco, E.; Dal Canton, T.; Danilishin, S. L.; D'Antonio, S.; Danzmann, K.; Darman, N. S.; Dattilo, V.; Dave, I.; Daveloza, H. P.; Davier, M.; Davies, G. S.; Daw, E. J.; Day, R.; Debra, D.; Debreczeni, G.; Degallaix, J.; De laurentis, M.; Deleglise, S.; Del Pozzo, W.; Denker, T.; Dent, T.; Dergachev, V.A.; Rosa, R.; DeRosa, R. T.; DeSalvo, R.; Dhurandhar, S.; Diaz, M. C.; Di Fiore, L.; Giovanni, M.G.; Di Girolamo, T.; Di Lieto, A.; Di Pace, S.; Di Palma, I.; Di Virgilio, A.; Dojcinoski, G.; Dolique, V.; Donovan, F.; Dooley, K. L.; Doravari, S.; Douglas, R.; Downes, T. P.; Drago, M.; Drever, R. W. P.; Driggers, J. C.; Du, Z.; Ducrot, M.; Dwyer, S. E.; Edo, T. B.; Edwards, M. C.; Effler, A.; Eggenstein, H. -B.; Ehrens, P.; Eichholz, J.; Eikenberry, S. S.; Engels, W.; Essick, R. C.; Etzel, T.; Evans, T. M.; Evans, T. M.; Everett, R.; Factourovich, M.; Fafone, V.; Fair, H.; Fairhurst, S.; Fan, X.M.; Fang, Q.; Farinon, S.; Farr, B.; Farr, W. M.; Favata, M.; Fays, M.; Fehrmann, H.; Fejer, M. M.; Ferrante, I.; Ferreira, E. C.; Ferrini, F.; Fidecaro, F.; Fiori, I.; Fiorucci, D.; Fisher, R. P.; Flaminio, R.; Fletcher, M; Fournier, J. -D.; Frasca, S.; Frasconi, F.; Frei, Z.; Freise, A.; Frey, R.; Frey, V.; Fricke, T. T.; Fritschel, P.; Frolov, V. V.; Fulda, P.; Fyffe, M.; Gabbard, H. A. G.; Gair, J. R.; Gammaitoni, L.; Gaonkar, S. G.; Garufi, F.; Gaur, G.; Gehrels, N.; Gemme, G.; Genin, E.; Gennai, A.; George, J.; Gergely, L.; Germain, V.; Ghosh, Archisman; Ghosh, S.; Giaime, J. A.; Giardina, K. D.; Giazotto, A.; Gill, K.P.; Glaefke, A.; Goetz, E.; Goetz, R.; Gondan, L.; Gonzalez, Idelmis G.; Castro, J. M. Gonzalez; Gopakumar, A.; Gordon, N. A.; Gorodetsky, M. L.; Gossan, S. E.; Lee-Gosselin, M.; Gouaty, R.; Grado, A.; Graef, C.; Graff, P. B.; Granata, M.; Grant, A.; Gras, S.; Gray, C.M.; Greco, G.; Green, A. C.; Groot, P.; Grote, H.; Grunewald, S.; Guidi, G. M.; Guo, X.; Gupta, A.; Gupta, M. K.; Gushwa, K. E.; Gustafson, E. K.; Gustafson, R.; Hacker, J. J.; Buffoni-Hall, R.; Hall, E. D.; Hammond, G.L.; Haney, M.; Hanke, M. M.; Hanks, J.; Hanna, C.; Hannam, M. D.; Hanson, P.J.; Hardwick, T.; Harms, J.; Harry, G. M.; Harry, I. W.; Hart, M. J.; Hartman, M. T.; Haster, C. -J.; Haughian, K.; Heidmann, A.; Heintze, M. C.; Heitmann, H.; Hello, P.; Hemming, G.; Hendry, M.; Heng, I. S.; Hennig, J.; Heptonstall, A. W.; Heurs, M.; Hild, S.; Hoak, D.; Hodge, K. A.; Hofman, D.; Hollitt, S. E.; Holt, K.; Holz, D. E.; Hopkins, P.; Hosken, D. J.; Hough, J.; Houston, E. A.; Howell, E. J.; Hu, Y. M.; Huang, S.; Huerta, E. A.; Huet, D.; Hughey, B.; Husa, S.; Huttner, S. H.; Huynh-Dinh, T.; Idrisy, A.; Indik, N.; Ingram, D. R.; Inta, R.; Isa, H. N.; Isac, J. -M.; Isi, M.; Islas, G.; Isogai, T.; Iyer, B. R.; Izumi, K.; Jacqmin, T.; Jang, D.H.; Jani, K.; Jaranowski, P.; Jawahar, S.; Jimenez-Forteza, F.; Johnson, W.; Jones, I.D.; Jones, R.; Jonker, R. J. G.; Ju, L.; Haris, K.; Kalaghatgi, C. V.; Kalogera, V.; Kandhasamy, S.; Kang, G.H.; Kanner, J. B.; Karki, S.; Kasprzack, M.; Katsavounidis, E.; Katzman, W.; Kaufer, S.; Kaur, T.; Kawabe, K.; Kawazoe, F.; Kefelian, F.; Kehl, M. S.; Keitel, D.; Kelley, D. B.; Kells, W.; Kennedy, R.E.; Key, J. S.; Khalaidovski, A.; Khalili, F. Y.; Khan, I.; Khan., S.; Khan, Z.; Khazanov, E. A.; Kijbunchoo, N.; Kim, Chunglee; Kim, J.; Kim, K.; Kim, Nam-Gyu; Kim, Namjun; Kim, Y.M.; King, E. J.; King, P. J.; Kinzel, D. L.; Kissel, J. S.; Kleybolte, L.; Klimenko, S.; Koehlenbeck, S. M.; Kokeyama, K.; Koley, S.; Kondrashov, V.; Kontos, A.; Korobko, M.; Korth, W. Z.; Kowalska, I.; Kozak, D. B.; Kringel, V.; Krolak, A.; Krueger, C.; Kuehn, G.; Kumar, P.; Kuo, L.; Kutynia, A.; Lackey, B. D.; Landry, M.; Lange, J.; Lantz, B.; Lasky, P. D.; Lazzarini, A.; Lazzaro, C.; Leaci, P.; Leavey, S.; Lebigot, E. O.; Lee, C.H.; Lee, K.H.; Lee, M.H.; Lee, K.; Lenon, A.; Leonardi, M.; Leong, J. R.; Leroy, N.; Letendre, N.; Levin, Y.; Levine, B. M.; Li, T. G. F.; Libson, A.; Littenberg, T. B.; Lockerbie, N. A.; Logue, J.; Lombardi, A. L.; Lord, J. E.; Lorenzini, M.; Loriette, V.; Lormand, M.; Losurdo, G.; Lough, J. D.; Lueck, H.; Lundgren, A. P.; Luo, J.; Lynch, R.; Ma, Y.; MacDonald, T.T.; Machenschalk, B.; MacInnis, M.; Macleod, D. M.; Magana-Sandoval, F.; Magee, R. M.; Mageswaran, M.; Majorana, E.; Maksimovic, I.; Malvezzi, V.; Man, N.; Mandic, V.; Mangano, V.; Mansell, G. L.; Manske, M.; Mantovani, M.; Marchesoni, F.; Marion, F.; Marka, S.; Marka, Z.; Markosyan, A. S.; Maros, E.; Martelli, F.; Martellini, L.; Martin, I. W.; Martin, R.M.; Martynov, D. V.; Marx, J. N.; Mason, K.; Masserot, A.; Massinger, T. J.; Masso-Reid, M.; Mastrogiovanni, S.; Matichard, F.; Matone, L.; Mavalvala, N.; Mazumder, N.; Mazzolo, G.; McCarthy, R.; McClelland, D. E.; McCormick, S.; McGuire, S. C.; McIntyre, G.; McIver, J.; McManus, D. J.; McWilliams, S. T.; Meacher, D.; Meadors, G. D.; Meidam, J.; Melatos, A.; Mendell, G.; Mendoza-Gandara, D.; Mercer, R. A.; Merilh, E. L.; Merzougui, M.; Meshkov, S.; Messenger, C.; Messick, C.; Metzdorff, R.; Meyers, P. M.; Mezzani, F.; Miao, H.; Michel, C.; Middleton, H.; Mikhailov, E. E.; Milano, L.; Miller, A. L.; Miller, J.; Millhouse, M.; Minenkov, Y.; Ming, J.; Mirshekari, S.; Mishra, C.; Mitra, S.; Mitrofanov, V. P.; Mitselmakher, G.; Mittleman, R.; Moggi, A.; Mohan, M.; Mohapatra, S. R. P.; Montani, M.; Moore, B.C.; Moore, J.C.; Moraru, D.; Gutierrez Moreno, M.; Morriss, S. R.; Mossavi, K.; Mours, B.; Mow-Lowry, C. M.; Mueller, C. L.; Mueller, G.; Muir, A. W.; Mukherjee, Arunava; Mukherjee, S.D.; Mukherjee, S.; Mukund, K. N.; Mullavey, A.; Munch, J.; Murphy, D. J.; Murray, P.G.; Mytidis, A.; Nardecchia, I.; Naticchioni, L.; Nayak, R. K.; Necula, V.; Nedkova, K.; Nelemans, G.; Gutierrez-Neri, M.; Neunzert, A.; Newton-Howes, G.; Nguyen, T. T.; Nielsen, A. B.; Nissanke, S.; Nitz, A.; Nocera, F.; Nolting, D.; Normandin, M. E. N.; Nuttall, L. K.; Oberling, J.; Ochsner, E.; O'Dell, J.; Oelker, E.; Ogin, G. H.; Oh, J.; Oh, S. H.; Ohme, F.; Oliver, M. B.; Oppermann, P.; Oram, Richard J.; O'Reilly, B.; O'Shaughnessy, R.; Ott, C. D.; Ottaway, D. J.; Ottens, R. S.; Overmier, H.; Owen, B. J.; Pai, A.; Pai, S. A.; Palamos, J. R.; Palashov, O.; Palomba, C.; Pal-Singh, A.; Pan, H.; Pankow, C.; Pannarale, F.; Pant, B. C.; Paoletti, F.; Paoli, A.; Papa, M. A.; Paris, H. R.; Parker, W.S; Pascucci, D.; Pasqualetti, A.; Passaquieti, R.; Passuello, D.; Patricelli, B.; Patrick, Z.; Pearlstone, B. L.; Pedraza, M.; Pedurand, R.; Pekowsky, L.; Pele, A.; Penn, S.; Pereira, R.R.; Perreca, A.; Phelps, M.; Piccinni, O. J.; Pichot, M.; Piergiovanni, F.; Pierro, V.; Pillant, G.; Pinard, L.; Pinto, I. M.; Pitkin, M.; Pletsch, H. J.; Poggiani, R.; Popolizio, P.; Post, A.; Powell, J.; Prasad, J.; Predoi, V.; Premachandra, S. S.; Prestegard, T.; Price, L. R.; Prijatelj, M.; Principe, M.; Privitera, S.; Prodi, G. A.; Prokhorov, L. G.; Puncken, O.; Punturo, M.; Puppo, P.; Purrer, M.; Qi, H.; Qin, J.; Quetschke, V.; Quintero, E. A.; Quitzow-James, R.; Raab, F. J.; Rabeling, D. S.; Radkins, H.; Raffai, P.; Raja, S.; Rakhmanov, M.; Rapagnani, P.; Raymond, V.; Razzano, M.; Re, V.; Read, J.; Reed, C. M.; Regimbau, T.; Rei, L.; Reid, S.; Reitze, D. H.; Rew, H.; Ricci, F.; Riles, K.; Robertson, N. A.; Robie, R.; Robinet, F.; Rocchi, A.; Rolland, L.; Rollins, J. G.; Roma, V. J.; Romano, J. D.; Romano, R.; Romanov, G.; Romie, J. H.; Rosinska, D.; Rowan, S.; Ruediger, A.; Ruggi, P.; Ryan, K.A.; Sachdev, P.S.; Sadecki, T.; Sadeghian, L.; Salconi, L.; Saleem, M.; Salemi, F.; Samajdar, A.; Sammut, L.; Sanchez, E. J.; Sandberg, V.; Sandeen, B.; Sanders, J. R.; Sassolas, B.; Sathyaprakash, B. S.; Saulson, P. R.; Sauter, O. E. S.; Savage, R. L.; Sawadsky, A.; Schale, P.; Schilling, R.; Schmidt, J; Schmidt, P.; Schnabel, R.B.; Schofield, R. M. S.; Schoenbeck, A.; Schreiber, K.E.C.; Schuette, D.; Schutz, B. F.; Scott, J.; Scott, M.S.; Sellers, D.; Sentenac, D.; Sequino, V.; Sergeev, A.; Serna, G.; Setyawati, Y.; Sevigny, A.; Shaddock, D. A.; Shahriar, M. S.; Shaltev, M.; Shao, Z.M.; Shapiro, B.; Shawhan, P.; Sheperd, A.; Shoemaker, D. H.; Shoemaker, D. M.; Siellez, K.; Siemens, X.; Sieniawska, M.; Sigg, D.; Silva, António Dias da; Simakov, D.; Singer, A; Singer, L. P.; Singh, A.; Singh, R.; Singhal, A.; Sintes, A. M.; Slagmolen, B. J. J.; Smith, R. J. E.; Smith, N.D.; Smith, R. J. E.; Son, E. J.; Sorazu, B.; Sorrentino, F.; Souradeep, T.; Srivastava, A. K.; Staley, A.; Steinke, M.; Steinlechner, J.; Steinlechner, S.; Steinmeyer, D.; Stephens, B. C.; Stiles, C.D.; Stone, J.R.; Strain, K. A.; Straniero, N.; Stratta, G.; Strauss, N. A.; Strigin, S. E.; Sturani, R.; Stuver, A. L.; Summerscales, T. Z.; Sun, L.; Sutton, P. J.; Swinkels, B. L.; Szczepanczyk, M. J.; Tacca, M.D.; Talukder, D.; Tanner, D. B.; Tapai, M.; Tarabrin, S. P.; Taracchini, A.; Taylor, W.R.; Theeg, T.; Thirugnanasambandam, M. P.; Thomas, E. G.; Thomas, M.; Thomas, P.; Thorne, K. A.; Thrane, E.; Tiwari, S.; Tiwari, V.; Tokmakov, K. V.; Tomlinson, C.; Tonelli, M.; Torres, C. V.; Torrie, C. I.; Toyra, D.; Travasso, F.; Traylor, G.; Trifiro, D.; Tringali, M. C.; Trozzo, L.; Tse, M.; Turconi, M.; Tuyenbayev, D.; Ugolini, D.; Unnikrishnan, C. S.; Urban, A. L.; Usman, S. A.; Vahlbruch, H.; Vajente, G.; Valdes, G.; van Bakel, N.; Van Beuzekom, Martin; van den Brand, J. F. J.; Van Den Broeck, C.F.F.; Vander-Hyde, D. C.; van der Schaaf, L.; van Heijningen, J. V.; van Veggel, A. A.; Vardaro, M.; Vass, S.; Vasuth, M.; Vaulin, R.; Vecchio, A.; Vedovato, G.; Veitch, J.; Veitch, P.J.; Venkateswara, K.; Verkindt, D.; Vetrano, F.; Vicere, A.; Vinciguerra, S.; Vine, D. J.; Vinet, J. -Y.; Vitale, S.; Vo, T.; Vocca, H.; Vorvick, C.; Voss, D. V.; Vousden, W. D.; Vyatchanin, S. P.; Wade, A. R.; Wade, L. E.; Wade, MT; Walker, M.; Wallace, L.; Walsh, S.; Wang, G.; Wang, H.; Wang, M.; Wang, X.; Wang, Y.; Ward, R. L.; Warner, J.; Was, M.; Weaver, B.; Wei, L. -W.; Weinert, M.; Weinstein, A. J.; Weiss, R.; Welborn, T.; Wen, L.M.; Wessels, P.; Westphal, T.; Wette, K.; Whelan, J. T.; Whitcomb, S. E.; White, D. J.; Whiting, B. F.; Williams, D.R.; Williamson, A. R.; Willis, J. L.; Willke, B.; Wimmer, M. H.; Winkler, W.; Wipf, C. C.; Wittel, H.; Woan, G.; Worden, J.; Wright, J.L.; Wu, G.; Yablon, J.; Yam, W.; Yamamoto, H.; Yancey, C. C.; Yap, M. J.; Yu, H.; Yvert, M.; Zadrozny, A.; Zangrando, L.; Zanolin, M.; Zendri, J. -P.; Zevin, M.; Zhang, F.; Zhang, L.; Zhang, M.; Zhang, Y.; Zhao, C.; Zhou, M.; Zhou, Z.; Zhu, X. J.; Zucker, M. E.; Zuraw, S. E.; Zweizig, J.; Archibald, A. M.; Banaszak, S.; Berndsen, A.; Boyles, J.; Cardoso, R. F.; Chawla, P.; Cherry, A.; Dartez, L. P.; Day-Lewis, F.D.; Epstein, C. R.; Ford, A. J.; Flanigan, J.; Garcia, A.; Hessels, J. W. T.; Hinojosa, J; Jenet, F. A.; Karako-Argaman, C.; Kaspi, V. M.; Keane, E. F.; Kondratiev, V. I.; Kramer, M.; Leake, S.; Lorimer, D.; Lunsford, G.; Lynch, R. S.; Martinez, J. G.; Mata, A.; McLaughlin, M. A.; McPhee, C. A.; Penucci, T.; Ransom, S.; Roberts, M. S. E.; Rohr, M. D. W.; Stairs, I. H.; Stovall, K.; van Leeuwen, J.; Walker, A. N.; Wells, B. L.

    2016-01-01

    We present an archival search for transient gravitational-wave bursts in coincidence with 27 single-pulse triggers from Green Bank Telescope pulsar surveys, using the LIGO, Virgo, and GEO interferometer network. We also discuss a check for gravitational-wave signals in coincidence with Parkes fast

  3. ARKTOS amphibious oil spill response craft for mixed ice/water conditions

    Energy Technology Data Exchange (ETDEWEB)

    Seligman, Bruce H.J.W. [ARKTOS International S.A., Tavannes (Switzerland)], email: bruce.seligman@arktoscraft.com; Hall, T.A. [Hall Marine Design Ltd., Vancouver B.C. (Canada)], email: thallhmd@telus.net

    2010-07-01

    The oil spill which occurred recently in the Gulf of Mexico highlighted the lack of efficient oil spill clean-up equipment for an offshore environment. With the increase in industrial operations in the Arctic Seas it is of high importance to develop an efficient oil spill response as the absence of reliable oil spill contingency plans will not be tolerated in such environmentally sensitive areas. The aim of this paper is to present the use of the ARKTOS amphibious craft for cleaning up an oil spill in the Arctic. This craft is usually used for logistical services and evacuation purposes; its use for clean-up purposes has been under study since 2000. This study showed that the ARKTOS craft could be an efficient means for oil spill clean-up in the Arctic because of its proven ice capable amphibious platforms and its hydraulic power; however oil collection trials should be performed to validate it.

  4. Continual Online Evolutionary Planning for In-Game Build Order Adaptation in StarCraft

    DEFF Research Database (Denmark)

    Justesen, Niels Orsleff; Risi, Sebastian

    2017-01-01

    able to switch between predefined strategies, which makes it hard to adapt to new situations. This paper introduces an evolutionary-based method to overcome this challenge, called Continual Online Evolutionary Planning (COEP), which is able to perform in-game adaptive build-order planning. COEP......The real-time strategy game StarCraft has become an important benchmark for AI research as it poses a complex environment with numerous challenges. An important strategic aspect in this game is to decide what buildings and units to produce. StarCraft bots playing in AI competitions today are only...... was added to an open source StarCraft bot called UAlbertaBot and is able to outperform the built-in bots in the game as well as being competitive against a number of scripted opening strategies. The COEP augmented bot can change its build order dynamically and quickly adapt to the opponent’s strategy....

  5. ARKTOS amphibious oil spill response craft for mixed ice/water conditions

    International Nuclear Information System (INIS)

    Seligman, Bruce H.J.W.; Hall, T.A.

    2010-01-01

    The oil spill which occurred recently in the Gulf of Mexico highlighted the lack of efficient oil spill clean-up equipment for an offshore environment. With the increase in industrial operations in the Arctic Seas it is of high importance to develop an efficient oil spill response as the absence of reliable oil spill contingency plans will not be tolerated in such environmentally sensitive areas. The aim of this paper is to present the use of the ARKTOS amphibious craft for cleaning up an oil spill in the Arctic. This craft is usually used for logistical services and evacuation purposes; its use for clean-up purposes has been under study since 2000. This study showed that the ARKTOS craft could be an efficient means for oil spill clean-up in the Arctic because of its proven ice capable amphibious platforms and its hydraulic power; however oil collection trials should be performed to validate it.

  6. Poly(vinyl chloride-grafted multi-walled carbon nanotubes via Friedel-Crafts alkylation

    Directory of Open Access Journals (Sweden)

    2010-11-01

    Full Text Available A novel approach was developed for the surface modification of the multi-walled carbon nanotubes (MWCNTs with high percentage of grafting (PG% by the grafting of polymer via the Friedel-Crafts alkylation. The graft reaction conditions, such as the amount of catalyst added, the reaction temperature, and the reaction time were optimized for the Friedel-Crafts alkylation of the MWCNTs with poly(vinyl chloride (PVC with anhydrous aluminum chloride (AlCl3 as catalyst in chloroform (CHCl3. The Fourier Transform Infrared (FT-IR, Raman, and thermogravimetric (TGA analysis showed that PVC had been successfully grafted onto MWCNTs both at the ends and on the sidewalls by the proposed Friedel-Crafts alkylation. The PVC grafted MWCNTs (PVC-MWCNTs could be dispersed well in organic solvent and the dispersion was more stable.

  7. Transient osteoporosis of hip

    Directory of Open Access Journals (Sweden)

    Mahesh M Choudhary

    2015-01-01

    Full Text Available We report a case of transient osteoporosis of the hip (TOH in a 50-year-old man including the clinical presentation, diagnostic studies, management, and clinical progress. TOH is a rare self-limiting condition that typically affects middle-aged men or, less frequently, women in the third trimester of pregnancy. Affected individuals present clinically with acute hip pain, limping gait, and limited ranges of hip motion. TOH may begin spontaneously or after a minor trauma. Radiographs are typically unremarkable but magnetic resonance (MR imaging studies yield findings consistent with bone marrow edema. TOH is referred to as regional migratory osteoporosis (RMO if it travels to other joints or the contralateral hip. TOH often resembles osteonecrosis but the two conditions must be differentiated due to different prognoses and management approaches. The term TOH is often used interchangeably and synonymously with transient bone marrow edema (TBME.

  8. Stability of Ignition Transients

    OpenAIRE

    V.E. Zarko

    1991-01-01

    The problem of ignition stability arises in the case of the action of intense external heat stimuli when, resulting from the cut-off of solid substance heating, momentary ignition is followed by extinction. Physical pattern of solid propellant ignition is considered and ignition criteria available in the literature are discussed. It is shown that the above mentioned problem amounts to transient burning at a given arbitrary temperature distribution in the condensed phase. A brief survey...

  9. Transient FDTD simulation validation

    OpenAIRE

    Jauregui Tellería, Ricardo; Riu Costa, Pere Joan; Silva Martínez, Fernando

    2010-01-01

    In computational electromagnetic simulations, most validation methods have been developed until now to be used in the frequency domain. However, the EMC analysis of the systems in the frequency domain many times is not enough to evaluate the immunity of current communication devices. Based on several studies, in this paper we propose an alternative method of validation of the transients in time domain allowing a rapid and objective quantification of the simulations results.

  10. MHD aspects of coronal transients

    International Nuclear Information System (INIS)

    Anzer, U.

    1979-10-01

    If one defines coronal transients as events which occur in the solar corona on rapid time scales (< approx. several hours) then one would have to include a large variety of solar phenomena: flares, sprays, erupting prominences, X-ray transients, white light transients, etc. Here we shall focus our attention on the latter two phenomena. (orig.) 891 WL/orig. 892 RDG

  11. Analysis of the FFTF primary pipe rupture transients

    International Nuclear Information System (INIS)

    Perkins, K.R.; Bari, R.A.; Chen, L.C.; Albright, D.C.

    1979-01-01

    The response of the Fast Flux Test Facility (FFTF) to hypothetical ruptures of the high pressure primary piping has been analyzed using two LMFBR plant systems codes, namely IANUS and DEMO. Comparisons of the average channel temperatures predicted by the two codes show good agreement for identical transients. However, the hot channel temperatures predicted by DEMO are about 60K higher than the corresponding IANUS predictions for severe transients. This difference is attributed to the dynamic hot channel factors employed in DEMO which discount the thermal inertia of the duct walls for rapid transients. DEMO also predicts more severe transients for hot-leg ruptures in FFTF than previously reported analyses for the CRBR

  12. Response of steam-water mixtures to pressure transients

    International Nuclear Information System (INIS)

    Hull, L.M.

    1985-01-01

    During the transition phase of a hypothetical core-disruptive accident in a liquid-metal fast breeder reactor, melting fuel-steel mixtures may begin to boil, resulting in a two-phase mixture of molten reactor fuel and steel vapor. Dispersal of this mixture by pressure transients may prevent recriticality of the fuel material. This paper describes the results of a series of experiments that investigated the response of two-phase mixtures to pressure transients. Simulant fluids (steam/water) were used in a transparent 10.2-cm-dia, 63.5-cm-long acrylic tube. The pressure transient was provided by releasing pressurized nitrogen from a supply tank. The data obtained are in the form of pressure-time records and high-speed movies. The varied parameters are initial void fraction (10% and 40%) and transient pressure magnitude (3.45 and 310 kPa)

  13. Radio and white-light observations of coronal transients

    Science.gov (United States)

    Dulk, G. A.

    1980-01-01

    Optical, radio and X-ray evidence of violent mass motions in the corona has existed for some years but only recently have the form, nature, frequency and implication of the transients become obvious. In this paper the observed properties of coronal transients are reviewed, with concentration on the white-light and radio manifestations. The classification according to speeds seems to be meaningful, with the slow transients having thermal emissions at radio wavelengths and the fast ones nonthermal. The possible mechanisms involved in the radio bursts are then discussed and estimates of various forms of energy are reviewed. It appears that the magnetic energy transported from the sun by the transient exceeds that of any other form, and that magnetic forces dominate in the dynamics of the motions. The conversion of magnetic energy into mechanical energy, by expansion of the field, provides a possible driving force for the coronal and interplanetary shock waves.

  14. Radio and white-light observations of coronal transients

    International Nuclear Information System (INIS)

    Dulk, G.A.

    1980-01-01

    Optical, radio and X-ray evidence of violent mass motions in the corona has existed for some years but only recently have the form, nature, frequency and implication of the transients become obvious. The author reviews the observed properties of coronal transients, concentrating on the white-light and radio manifestations. The classification according to speeds seems to be meaningful, with the slow transients having thermal emissions at radio wavelengths and the fast ones non-thermal. The possible mechanisms involved in the radio bursts are discussed and the estimates of various forms of energy are reviewed. It appears that the magnetic energy transported from the Sun by the transient exceeds that of any other form, and that magnetic forces dominate in the dynamics of the motions. The conversion of magnetic energy into mechanical energy, by expansion of the fields, provides a possible driving force for the coronal and interplanetary shock waves. (Auth.)

  15. How Valuable is a Well-Crafted Design and Name Brand?

    DEFF Research Database (Denmark)

    Kristensen, Tore; Gabrielsen, Gorm; Zaichkowsky, Judith

    2012-01-01

    Preferences for similarly designed consumer products, evaluated blind and branded and also with and without prices, were tested in a consumer setting. The consumer's perceptual experience led to preference of the well-crafted high-priced option. This preference was enhanced by priming consumers w...... of choices using measures of inherent design acumen, prior experience, and purchasing behavior were largely unsuccessful.......Preferences for similarly designed consumer products, evaluated blind and branded and also with and without prices, were tested in a consumer setting. The consumer's perceptual experience led to preference of the well-crafted high-priced option. This preference was enhanced by priming consumers...

  16. Two-craft Coulomb formation study about circular orbits and libration points

    Science.gov (United States)

    Inampudi, Ravi Kishore

    This dissertation investigates the dynamics and control of a two-craft Coulomb formation in circular orbits and at libration points; it addresses relative equilibria, stability and optimal reconfigurations of such formations. The relative equilibria of a two-craft tether formation connected by line-of-sight elastic forces moving in circular orbits and at libration points are investigated. In circular Earth orbits and Earth-Moon libration points, the radial, along-track, and orbit normal great circle equilibria conditions are found. An example of modeling the tether force using Coulomb force is discussed. Furthermore, the non-great-circle equilibria conditions for a two-spacecraft tether structure in circular Earth orbit and at collinear libration points are developed. Then the linearized dynamics and stability analysis of a 2-craft Coulomb formation at Earth-Moon libration points are studied. For orbit-radial equilibrium, Coulomb forces control the relative distance between the two satellites. The gravity gradient torques on the formation due to the two planets help stabilize the formation. Similar analysis is performed for along-track and orbit-normal relative equilibrium configurations. Where necessary, the craft use a hybrid thrusting-electrostatic actuation system. The two-craft dynamics at the libration points provide a general framework with circular Earth orbit dynamics forming a special case. In the presence of differential solar drag perturbations, a Lyapunov feedback controller is designed to stabilize a radial equilibrium, two-craft Coulomb formation at collinear libration points. The second part of the thesis investigates optimal reconfigurations of two-craft Coulomb formations in circular Earth orbits by applying nonlinear optimal control techniques. The objective of these reconfigurations is to maneuver the two-craft formation between two charged equilibria configurations. The reconfiguration of spacecraft is posed as an optimization problem using the

  17. Craft villages and tourism development, a case study in Phu Quoc island of Vietnam

    Directory of Open Access Journals (Sweden)

    Hieu Vu Minh

    2017-05-01

    Full Text Available Craft tourism is attracting many domestic and foreign tourists. In recent years in Vietnam, craft villages have exploited their potentials in tourism industry. For many different causes, tourism activities have yet reached expectations and their potentials for tourism development. This paper is to review their currents, tourism potentials and limitations and then formulate recommendations to the tourism development in Phu Quoc island. The data for this paper are from two sources. Secondary data were collected from the vast literature and journals. Primary data were from interviews with village owners, related authorities, tourists, tourism corporate, etc. and results serve as guidelines to develop the tourism industry and management.

  18. Fast reactors

    International Nuclear Information System (INIS)

    Vasile, A.

    2001-01-01

    Fast reactors have capacities to spare uranium natural resources by their breeding property and to propose solutions to the management of radioactive wastes by limiting the inventory of heavy nuclei. This article highlights the role that fast reactors could play for reducing the radiotoxicity of wastes. The conversion of 238 U into 239 Pu by neutron capture is more efficient in fast reactors than in light water reactors. In fast reactors multi-recycling of U + Pu leads to fissioning up to 95% of the initial fuel ( 238 U + 235 U). 2 strategies have been studied to burn actinides: - the multi-recycling of heavy nuclei is made inside the fuel element (homogeneous option); - the unique recycling is made in special irradiation targets placed inside the core or at its surroundings (heterogeneous option). Simulations have shown that, for the same amount of energy produced (400 TWhe), the mass of transuranium elements (Pu + Np + Am + Cm) sent to waste disposal is 60,9 Kg in the homogeneous option and 204.4 Kg in the heterogeneous option. Experimental programs are carried out in Phenix and BOR60 reactors in order to study the feasibility of such strategies. (A.C.)

  19. Fast ejendom

    DEFF Research Database (Denmark)

    Pagh, Peter

    Bogen omfatter en gennemgang af lovgivning, praksis og teori vedrørende køb af fast ejendom og offentligretlig og privatretlig regulering. Bogen belyser bl.a. de privatretlige emner: købers misligholdelsesbeføjelser, servitutter, naboret, hævd og erstatningsansvar for miljøskader samt den...

  20. 78 FR 52872 - Airworthiness Directives; 328 Support Services GmbH (Type Certificate Previously Held by AvCraft...

    Science.gov (United States)

    2013-08-27

    ... Services GmbH (Type Certificate Previously Held by AvCraft Aerospace GmbH; Fairchild Dornier GmbH; Dornier... certain 328 Support Services GmbH (Type Certificate Previously Held by AvCraft Aerospace GmbH; Fairchild... send any written relevant data, views, or arguments about this proposed AD. Send your comments to an...

  1. Regular versus cutback-related change: the role of employee job crafting in organizational change contexts of different nature

    NARCIS (Netherlands)

    Petrou, P.; Demerouti, E.; Xanthopoulou, D.

    2017-01-01

    The present study addresses how job characteristics (e.g., autonomy, workload, and their interaction) relate to employee job crafting (i.e., seeking resources, seeking challenges, and reducing demands), and whether job crafting relates to employee work-related well-being (i.e., work engagement and

  2. Synthesis of 1-indanones through the intramolecular Friedel-Crafts acylation reaction using NbCl5 as Lewis acid

    International Nuclear Information System (INIS)

    Polo, Ellen Christine; Silva-Filho, Luiz Carlos da; Silva, Gil Valdo Jose da; Constantino, Mauricio Gomes

    2008-01-01

    The intramolecular Friedel-Crafts acylation reaction of 3-arylpropanoic acids to give 1-indanones can be effected in good yields under mild conditions (room temperature) by using niobium pentachloride. Our results indicate that NbCl 5 acts both as reagent (to transform carboxylic acids into acyl chlorides) and as catalyst in the Friedel-Crafts cyclization. (author)

  3. The influence of future time perspective on work engagement and job performance: the role of job crafting.

    NARCIS (Netherlands)

    Kooij, T.A.M.; Tims,; Akkermans,

    2017-01-01

    This two-wave study aimed to examine future time perspective (FTP) as an antecedent of job crafting, and in turn job crafting as a mediator in associations between FTP and work outcomes. Based on the lifespan socio-emotional selectivity theory, we expected that open-ended and limited FTP would evoke

  4. Environmentally-induced discharge transient coupling to spacecraft

    Science.gov (United States)

    Viswanathan, R.; Barbay, G.; Stevens, N. J.

    1985-01-01

    The Hughes SCREENS (Space Craft Response to Environments of Space) technique was applied to generic spin and 3-axis stabilized spacecraft models. It involved the NASCAP modeling for surface charging and lumped element modeling for transients coupling into a spacecraft. A differential voltage between antenna and spun shelf of approx. 400 V and current of 12 A resulted from discharge at antenna for the spinner and approx. 3 kv and 0.3 A from a discharge at solar panels for the 3-axis stabilized Spacecraft. A typical interface circuit response was analyzed to show that the transients would couple into the Spacecraft System through ground points, which are most vulnerable. A compilation and review was performed on 15 years of available data from electron and ion current collection phenomena. Empirical models were developed to match data and compared with flight data of Pix-1 and Pix-2 mission. It was found that large space power systems would float negative and discharge if operated at or above 300 V. Several recommendations are given to improve the models and to apply them to large space systems.

  5. Transient performance of S-prism

    International Nuclear Information System (INIS)

    Dubberley, A.E.; Boardman, C.E.; Gamble, R.E.; Hiu, M.M.; Lipps, A.J.; Wu, T.

    2001-01-01

    S-PRISM is an advanced Fast Reactor plant design that utilizes compact modular pool-type reactors sized to enable factory fabrication and an affordable prototype test of a single Nuclear Steam Supply System (NSSS) for design certification at minimum cost and risk. Based on the success of the previous DOE sponsored Advanced Liquid Metal Reactor (ALMR) program GE has continued to develop and assess the technical viability and economic potential of an up-rated plant called SuperPRISM (S-PRISM). This paper presents the results of transient analyses performed to assess the ability of S-PRISM to accommodate severe accident initiator events. A unique safety capability of S-PRISM is accommodation of the ''higher probability'' accident initiators that led to core melt accidents in prior large LMRs. These events, the Anticipated Transients Without Scram (ATWS) events, are thus the focus of passive safety confirmation analyses. The events included in this assessment are: Unprotected Loss of Flow, Unprotected Loss of Heat Sink, Unprotected Loss of Flow and Heat sink, Unprotected Transient Overpower and Unprotected Safe Shutdown Earthquake. (author)

  6. Mitigation method of thermal transient stress by thermalhydraulic-structure total analysis

    International Nuclear Information System (INIS)

    Kasahara, Naoto; Jinbo, Masakazu; Hosogai, Hiromi

    2003-01-01

    This study proposes a rational evaluation and mitigation method of thermal transient loads in fast reactor components by utilizing relationships among plant system parameters and stresses induced by thermal transients of plants. A thermalhydraulic-structure total analysis procedure helps us to grasp relationship among system parameters and thermal stresses. Furthermore, it enables mitigation of thermal transient loads by adjusting system parameters. In order to overcome huge computations, a thermalhydraulic-structure total analysis code and the Design of Experiments methodology are utilized. The efficiency of the proposed mitigation method is validated through thermal stress evaluation of an intermediate heat exchanger in Japanese demonstration fast reactor. (author)

  7. The integral fast reactor

    International Nuclear Information System (INIS)

    Till, C.E.

    1987-01-01

    On April 3rd, 1986, two dramatic demonstrations of the inherent capability of sodium-cooled fast reactors to survive unprotected loss of cooling accidents were carried out on the experimental sodium-cooled power reactor, EBR-II, on the Idaho site of Argonne National Laboratory. Transients potentially of the most serious kind, one an unprotected loss of flow, the other an unprotected loss of heat sink, both initiated from full power. In both cases the reactor quietly shut itself down, without damage of any kind. These tests were a part of the on-going development program at Argonne to develop an advanced reactor with significant new inherent safety characteristics. Called the Integral Fast Reactor, or IFR, the basic thrust is to develop everything that is needed for a complete nuclear power system - reactor, closed fuel cycle, and waste processing - as a single optimized entity, and, for simplicity in concept, as an integral part of a single plant. The particular selection of reactor materials emphasizes inherent safety characteristics and also makes possible a simplified closed fuel cycle and waste process improvements

  8. The integral fast reactor

    International Nuclear Information System (INIS)

    Till, C.E.

    1987-01-01

    On April 3rd, 1986, two demonstrations of the inherent capability of sodium-cooled fast reactors to survive unprotected loss of cooling accidents were carried out on the experimental sodium-cooled power reactor, EBR-II, on the Idaho site of Argonne National Laboratory. Transients potentially of the most serious kind, one an unprotected loss of flow, the other an unprotected loss of heat sink, both initiated from full power. In both cases the reactor quietly shut itself down, without damage of any kind. These tests were a part of the on-going development program at Argonne to develop an advanced reactor with significant new inherent safety characteristics. Called the integral fast reactor, or IFR, the basic thrust is to develop everything that is needed for a complete nuclear power system - reactor, closed fuel cycle, and waste processing - as a single optimized entity, and, for simplicity in concept, as an integral part of a single plant. The particular selection of reactor materials emphasizes inherent safety characteristics also makes possible a simplified close fuel cycle and waste process improvements. The paper describes the IFR concept, the inherent safety, tests, and status of IFR development today

  9. Magnetic transients in flares

    International Nuclear Information System (INIS)

    Zirin, H.; Tanaka, K.

    1981-01-01

    We present data on magnetic transients (mgtr's) observed in flares on 1980 July 1 and 5 with Big Bear videomagnetograph (VMG). The 1980 July 1 event was a white light flare in which a strong bipolar mgtr was observed, and a definite change in the sunspots occurred at the time of the flare. In the 1980 July 5 flare, a mgtr was observed in only one polarity, and, although no sunspot changes occurred simultaneous with the flare, major spot changes occurred in a period of hours

  10. Familial Transient Global Amnesia

    Directory of Open Access Journals (Sweden)

    R.Rhys Davies

    2012-12-01

    Full Text Available Following an episode of typical transient global amnesia (TGA, a female patient reported similar clinical attacks in 2 maternal aunts. Prior reports of familial TGA are few, and no previous account of affected relatives more distant than siblings or parents was discovered in a literature survey. The aetiology of familial TGA is unknown. A pathophysiological mechanism akin to that in migraine attacks, comorbidity reported in a number of the examples of familial TGA, is one possibility. The study of familial TGA cases might facilitate the understanding of TGA aetiology.

  11. Primary student teachers’ perceptions of their prior experiences with craft-making in light of Hannah Arendt’s human condition

    Directory of Open Access Journals (Sweden)

    Seija Karppinen

    2013-09-01

    Full Text Available This article presents the results of a study about student teachers’ feelings toward craft-making and teaching crafts. As a teacher educator in teacher training, my interest lies first in student teachers’ prior craft experiences and in their prejudices about themselves as craft-makers in relation to the human condition as set forth by philosopher Hannah Arendt (1958/2002. Second, I am interested in how students’ experiences and their image of crafts affect their attitude to crafts and teaching crafts. The study uses qualitative content analysis (e.g. Cohen, Manion & Morrison, 2007, concept clarification (e.g. Kramer, 1993; Burkin, 2011 and thought experiments (Zalta, 2011; Cohnitz, 2006; Sorensen, 1992 to identify and categorise student teachers’ emotional experiences. The data consist of essays (craft biographies, N=144 by first-year student teachers which were written in 2008 and 2009 during a basic course in crafts as part of teacher education at the University of Helsinki. Arendt (1958/2002 labelled the elements of the human condition as labour, work and action. In this study I discuss how, for instance, Arendtian concepts could be explained in relation to crafts, craft-making and education. Arendt categorises craft, defined as things made by hand, as part of the concept of work. In this study, I consider whether crafts and craft-making could be part of other Arendtian terms as well and how these terms fit various educational situations. As a result, there is a need for additional terms alongside Arendtian terms to describe multifaceted craft-making and primary student teachers’ perceptions of themselves as craft-makers. In relation to student teachers’ memories on primary school crafts, I have labelled Arendtian concept labour as students’ credit-orientated activity, the concept of work as making-orientated activity and the concept of action as interaction-orientated activity. These three orientations of craft frame student

  12. Scholarisation, Apprenticeship and Social Differentiation. Analysis of the Non-Industrial Craft Sector in Morocco

    Science.gov (United States)

    Gerard, Etienne

    2012-01-01

    The article approaches the question of the schooling processes in the particular environment of the Moroccan craftsmen of Fez. It shows that the weak schooling of the children is bound to the representations and to the ways of transmission of craft industry knowledge. Schooling is, indeed, the object of tensions between a school system of western…

  13. Trait-level and week-level regulatory focus as a motivation to craft a job

    NARCIS (Netherlands)

    Petrou, P.; Demerouti, E.

    2015-01-01

    Purpose – The purpose of this paper is to address regulatory focus (promotion vs prevention) as a trait-level variable and a week-level variable linked to employee job crafting behaviors (i.e. seeking resources, seeking challenges and reducing demands). The authors hypothesized that while promotion

  14. Automatic Observer Script for StarCraft: Brood War Bot Games (technical report)

    OpenAIRE

    Mattsson, Björn Persson; Vajda, Tomáš; Čertický, Michal

    2015-01-01

    This short report describes an automated BWAPI-based script developed for live streams of a StarCraft Brood War bot tournament, SSCAIT. The script controls the in-game camera in order to follow the relevant events and improve the viewer experience. We enumerate its novel features and provide a few implementation notes.

  15. Fatigue resistance of welded joints in aluminium high-speed craft : A total stress concept

    NARCIS (Netherlands)

    Den Besten, J.H.

    2015-01-01

    Crew transfers, surveillance duties and {security, rescue, interception} operations at sea typically require high-speed craft. Aluminium is quite often selected as hull structure material because of its weight save potential in comparison to steel. The fatigue strength, however, may become a point

  16. The river and the people. An approach to memories, craft and adult education

    Directory of Open Access Journals (Sweden)

    Emilio Lucio-Villegas

    2018-04-01

    Full Text Available The main aim of this article is to describe an ongoing study to recover the memories of the people and the traditional crafts associated with the Guadalquivir River where it passes through a town called C., 12km from the city of S. in the south of Spain. It seems that people are losing their sense of belonging to both a symbolic and geographical territory. The process for recovering it can be considered a generator of experiences and learning. These experiences are related to identity as an element which enables people to understand how individuals establish relationships amongst themselves and with the environment. The paper describes the process of research based on interviewing people to capture their experiences. This is a work in process. The first outcomes are related to a number of descriptive categories such as: the crafts associated with the River; the use of the River to transport goods and people; the family ties associated with the crafts; the cosmopolitanism of the people and the changes ensuing from it; the role of women; and the River as a magical and mysterious place. Preliminary conclusions call on us to consider the importance of recovering traditional crafts as a source of adult education, and of maintaining a cultural identity threatened by globalisation processes.

  17. Traditional Craft or Technology Education: Development of Students' Technical Abilities in Finnish Comprehensive School

    Science.gov (United States)

    Autio, Ossi

    2016-01-01

    Changes in the economy, nature, production and society together with increasing scientific and technological knowledge make demands of transforming school teaching in the field of technology education. The aim of the article is briefly to explore the integration between science, technology and traditional craft education by analyzing the current…

  18. 25 CFR 141.27 - Trade in imitation Indian crafts prohibited.

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Trade in imitation Indian crafts prohibited. 141.27 Section 141.27 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR FINANCIAL ACTIVITIES BUSINESS PRACTICES ON THE NAVAJO, HOPI AND ZUNI RESERVATIONS General Business Practices § 141.27 Trade in imitation...

  19. Job crafting and performance of Dutch and American health care professionals

    NARCIS (Netherlands)

    Gordon, H.J.; Demerouti, E.; Le Blanc, P.M.; Bipp, T.

    2015-01-01

    We explore how job demands and job resources are related to job crafting, and how this, in turn, is related to performance in two samples of American (US; N = 70) and Dutch (NL; N = 144) health care professionals (HCP). A cross-sectional, cross-cultural design revealed that US HCP have higher job

  20. The Functions and Benefits of the ePortfolio in Craft Education at the Primary Level

    Science.gov (United States)

    Saarinen, Auli; Seitamaa-Hakkarainen, Pirita; Hakkarainen, Kai

    2016-01-01

    The authors investigated primary school pupils' experiences using an electronic portfolio in their craft education for a three year period, from the 3rd grade until the end of the 5th grade. This article emphasizes the functions and the benefits of the ePortfolio method and outlines general user experiences based on pupil interviews (N = 38),…