Load building versus conservation as demand-side management objectives

International Nuclear Information System (INIS)

Kexel, D.T.

1994-01-01

This paper examines the economics of load building versus conservation as demand-side management objectives. Economic criteria to be used in evaluating each type of program from the perspectives of all impacted parties are provided. The impact of DSM programs on electric rates is shown to be a key focal point of a thorough evaluation

Impact of realistic communications for fast-acting demand side management

DEFF Research Database (Denmark)

Dambrauskas, Paulius; Syed, Mazheruddin H.; Blair, Steven M.

2017-01-01

The rising penetration of intermittent energy resources is increasing the need for more diverse electrical energy resources that are able to support ancillary services. Demand side management (DSM) has a significant potential to fulfil this role, but several challenges are still impeding the wide...

Modeling and Analysis of Commercial Building Electrical Loads for Demand Side Management

Science.gov (United States)

Berardino, Jonathan

In recent years there has been a push in the electric power industry for more customer involvement in the electricity markets. Traditionally the end user has played a passive role in the planning and operation of the power grid. However, many energy markets have begun opening up opportunities to consumers who wish to commit a certain amount of their electrical load under various demand side management programs. The potential benefits of more demand participation include reduced operating costs and new revenue opportunities for the consumer, as well as more reliable and secure operations for the utilities. The management of these load resources creates challenges and opportunities to the end user that were not present in previous market structures. This work examines the behavior of commercial-type building electrical loads and their capacity for supporting demand side management actions. This work is motivated by the need for accurate and dynamic tools to aid in the advancement of demand side operations. A dynamic load model is proposed for capturing the response of controllable building loads. Building-specific load forecasting techniques are developed, with particular focus paid to the integration of building management system (BMS) information. These approaches are tested using Drexel University building data. The application of building-specific load forecasts and dynamic load modeling to the optimal scheduling of multi-building systems in the energy market is proposed. Sources of potential load uncertainty are introduced in the proposed energy management problem formulation in order to investigate the impact on the resulting load schedule.

Air pollution impacts from demand-side management

International Nuclear Information System (INIS)

Hall, D.C.; Sandii Win, M.; Hall, J.V.

1995-01-01

Air-polluting emission rates and energy-efficiency ratings vary widely among power plants, depending on location, age and whether the power plant is repowered. Traditional regulations require installation of specified emission control equipment that varies among power plants. These regulations do not specify that utilities first dispatch the cleanest power plants as demand varies from peak to off-peak periods. This empirical analysis shows, for 2 years out of 20, that demand-side management (DSM) programs increase air pollution. One reason for this result is that regulations require installation of specific emission-control technology but do not provide the incentive to take actual emissions or their air quality impacts into account when operating the system. For certain types of air pollutants and in some regions, regulatory programs now include markets for tradable emission credits. Such programs may alter this incentive. (author)

The impact of demand side management strategies in the penetration of renewable electricity

International Nuclear Information System (INIS)

Pina, André; Silva, Carlos; Ferrão, Paulo

2012-01-01

High fuel costs, increasing energy security and concerns with reducing emissions have pushed governments to invest in the use of renewable energies for electricity generation. However, the intermittence of most renewable resources when renewable energy provides a significant share of the energy mix can create problems to electricity grids, which can be minimized by energy storage systems that are usually not available or expensive. An alternative solution consists on the use of demand side management strategies, which can have the double effect of reducing electricity consumption and allowing greater efficiency and flexibility in the grid management, namely by enabling a better match between supply and demand. This work analyzes the impact of demand side management strategies in the evolution of the electricity mix of Flores Island in the Azores archipelago which is characterized by high shares of renewable energy and therefore the introduction of more renewable energy sources makes it an interesting case study for testing innovative solutions. The electricity generation system is modeled in TIMES, a software which optimizes the investment and operation of wind and hydro plants until 2020 based on scenarios for demand growth, deployment of demand response technologies in the domestic sector and promotion of behavioral changes to eliminate standby power. The results show that demand side management strategies can lead to a significant delay in the investment on new generation capacity from renewable resources and improve the operation of the existing installed capacity. -- Highlights: ► Energy efficiency can help reduce the need for investment in more renewable energy. ► Dynamic demand helps increase the use of renewable energy in low demand periods. ► Around 40% of total consumption by domestic appliances is used as dynamic demand. ► The load of domestic appliances is mainly shifted to the 5:00 to 9:00 period.

A System Architecture for Autonomous Demand Side Load Management in Smart Buildings

DEFF Research Database (Denmark)

Costanzo, Giuseppe Tommaso; Zhu, Guchuan; Anjos, Miguel F.

2012-01-01

This paper presents a system architecture for load management in smart buildings which enables autonomous demand side load management in the smart grid. Being of a layered structure composed of three main modules for admission control, load balancing, and demand response management...... in multiple time-scales and allows seamless integration of diverse techniques for online operation control, optimal scheduling, and dynamic pricing. The design of a home energy manager based on this architecture is illustrated and the simulation results with Matlab/Simulink confirm the viability...

Neural network controller for Active Demand-Side Management with PV energy in the residential sector

International Nuclear Information System (INIS)

Matallanas, E.; Castillo-Cagigal, M.; Gutiérrez, A.; Monasterio-Huelin, F.; Caamaño-Martín, E.; Masa, D.; Jiménez-Leube, J.

2012-01-01

Highlights: ► We have developed a neural controller for Active Demand-Side Management. ► The controller consists of Multilayer Perceptrons evolved with a genetic algorithm. ► The architecture of the controller is distributed and modular. ► The simulations show that the electrical local behavior improves. ► Active Demand-Side Management helps users to control his energy behaviour. -- Abstract: In this paper, we describe the development of a control system for Demand-Side Management in the residential sector with Distributed Generation. The electrical system under study incorporates local PV energy generation, an electricity storage system, connection to the grid and a home automation system. The distributed control system is composed of two modules: a scheduler and a coordinator, both implemented with neural networks. The control system enhances the local energy performance, scheduling the tasks demanded by the user and maximizing the use of local generation.

Experimental determination of demand side management potential of wet appliances in the Netherlands

NARCIS (Netherlands)

Staats, M. R.; de Boer-Meulman, P. D M; van Sark, W. G J H M

2017-01-01

The potential of demand side management (DSM) of wet appliances (washing machine, dishwasher and tumble dryer) in households with photovoltaic (PV) systems is studied experimentally focusing on evening peak demand reduction and increase in PV self-consumption. In a sample of 100 Dutch households the

New vision of demand side management strategy as the main tool in cooperation suppliers and consumers of electrical energy

International Nuclear Information System (INIS)

Szkutnik, J.

2012-01-01

The paper presents the complex proposal for the implementation of the demand side management in the Polish energy sector. The issue of demand side management is well known in the world, European and domestic dimensions. The experience of western countries shows that at least to some extent, the demand side management strategy is already implemented there. However, Polish experience is far too insufficient. Demand side management consists in efficient management of energy demand as well as adoption of this demand i.e. changing the load. The decrease of energy consumption in the moment of its peak demand leads to the balance between the demand and supply in the system, which influences the market price of energy. If certain mechanisms are implemented that will cause that final receivers will be willing to adjust their demand for energy, we will create the Demand Response, which is an efficient tool in the demand side management strategy. It is assumed that electronic meters will bring a real quality change. The undertakings based on initiatives of the Polish Energy Regulatory Office that promote the concept of implementation of electronic metering in the Polish energy sector prove that Poland is determined to improve its energy efficiency. The report describes the concept of the electronic meters that enables the realisation of the demand side management strategy as well as other complementary solutions that make the strategy even more efficient. In this field, it is planned to establish a dedicated loyalty programmes for energy receivers. The concept includes also the combination of the model solutions with the campaign 'energy efficiency' organised by the Ministry of Economy, which aims at fulfilling the requirements of the directive 2006/32/EC on energy end-use efficiency and energy services. As complementary solution in this new vision to add the system of recycling of waste heat home appliance devices. (Author)

Industrial demand side management: A status report

Energy Technology Data Exchange (ETDEWEB)

Hopkins, M.F.; Conger, R.L.; Foley, T.J. [and others

1995-05-01

This report provides an overview of and rationale for industrial demand side management (DSM) programs. Benefits and barriers are described, and data from the Manufacturing Energy Consumption Survey are used to estimate potential energy savings in kilowatt hours. The report presents types and examples of programs and explores elements of successful programs. Two in-depth case studies (from Boise Cascade and Eli Lilly and Company) illustrate two types of effective DSM programs. Interviews with staff from state public utility commissions indicate the current thinking about the status and future of industrial DSM programs. A comprehensive bibliography is included, technical assistance programs are listed and described, and a methodology for evaluating potential or actual savings from projects is delineated.

Accurate Estimation of Target amounts Using Expanded BASS Model for Demand-Side Management

Science.gov (United States)

Kim, Hyun-Woong; Park, Jong-Jin; Kim, Jin-O.

2008-10-01

The electricity demand in Korea has rapidly increased along with a steady economic growth since 1970s. Therefore Korea has positively propelled not only SSM (Supply-Side Management) but also DSM (Demand-Side Management) activities to reduce investment cost of generating units and to save supply costs of electricity through the enhancement of whole national energy utilization efficiency. However study for rebate, which have influence on success or failure on DSM program, is not sufficient. This paper executed to modeling mathematically expanded Bass model considering rebates, which have influence on penetration amounts for DSM program. To reflect rebate effect more preciously, the pricing function using in expanded Bass model directly reflects response of potential participants for rebate level.

Demand-side management and demand response in the Ontario energy sectors

International Nuclear Information System (INIS)

2003-01-01

In June 2003, the Ontario Energy Board was asked by the Minister of Energy to identify and review options for the delivery of demand-side management (DSM) and demand response (DR) activities within the electricity sector, by consulting with stakeholders. The role of local distribution company (distributor) in such activities was also to be determined. The objective was to balance implementation costs with the benefits to consumers and the entire system. The preliminary research and ideas were presented in this discussion paper. Definitions of both DSM and DR were provided, followed by an overview of economic theory and competitive markets. The framework for discussion was presented, along with a list of issues and other considerations. A spectrum of potential approaches to a DSM and DR framework was included and jurisdictional examples provided. A brief overview of the concept of load aggregation was presented and the next steps for consultations were outlined. 30 refs., 7 tabs

A Novel Prosumer-Based Energy Sharing and Management (PESM) Approach for Cooperative Demand Side Management (DSM) in Smart Grid

OpenAIRE

Sohail Razzaq; Rehman Zafar; Naveed Ahmed Khan; Asif Raza Butt; Anzar Mahmood

2016-01-01

Increasing population and modern lifestyle have raised energy demands globally. Demand Side Management (DSM) is one important tool used to manage energy demands. It employs an advanced power infrastructure along with bi-directional information flow among utilities and users in order to achieve a balanced load curve and minimize demand-supply mismatch. Traditionally, this involves shifting the electricity demand from peak hours to other times of the day in an optimized manner. Multiple users e...

Modulation strategies of integrated HVAC systems used in residential buildings for demand-side management at different scales

OpenAIRE

Georges, Emeline

2017-01-01

The integration of renewable energy sources in the electricity production mix has an important impact on the management of the electricity grid, due to their intermittency. In particular, to ensure grid balancing, there is a rising need for flexibility, both on the supply and demand sides. A possible solution to help achieve grid balancing is the smart modulation of the electrical load in a "demand following supply" scheme through demand-side management. In this context, the objective of...

Optimal Multi-scale Demand-side Management for Continuous Power-Intensive Processes

Science.gov (United States)

Mitra, Sumit

With the advent of deregulation in electricity markets and an increasing share of intermittent power generation sources, the profitability of industrial consumers that operate power-intensive processes has become directly linked to the variability in energy prices. Thus, for industrial consumers that are able to adjust to the fluctuations, time-sensitive electricity prices (as part of so-called Demand-Side Management (DSM) in the smart grid) offer potential economical incentives. In this thesis, we introduce optimization models and decomposition strategies for the multi-scale Demand-Side Management of continuous power-intensive processes. On an operational level, we derive a mode formulation for scheduling under time-sensitive electricity prices. The formulation is applied to air separation plants and cement plants to minimize the operating cost. We also describe how a mode formulation can be used for industrial combined heat and power plants that are co-located at integrated chemical sites to increase operating profit by adjusting their steam and electricity production according to their inherent flexibility. Furthermore, a robust optimization formulation is developed to address the uncertainty in electricity prices by accounting for correlations and multiple ranges in the realization of the random variables. On a strategic level, we introduce a multi-scale model that provides an understanding of the value of flexibility of the current plant configuration and the value of additional flexibility in terms of retrofits for Demand-Side Management under product demand uncertainty. The integration of multiple time scales leads to large-scale two-stage stochastic programming problems, for which we need to apply decomposition strategies in order to obtain a good solution within a reasonable amount of time. Hence, we describe two decomposition schemes that can be applied to solve two-stage stochastic programming problems: First, a hybrid bi-level decomposition scheme with

Generation of flexible domestic load profiles to evaluate demand side management approaches

NARCIS (Netherlands)

Hoogsteen, Gerwin; Molderink, Albert; Hurink, Johann L.; Smit, Gerardus Johannes Maria

2016-01-01

Various Demand Side Management (DSM) approaches have been developed the last couple of years to avoid costly grid upgrades. However, evaluation of these DSM methodologies is usually restricted to a use-case specific example, making comparison between different DSM approaches hard. This paper

A novel microgrid demand-side management system for manufacturing facilities

Science.gov (United States)

Harper, Terance J.

Thirty-one percent of annual energy consumption in the United States occurs within the industrial sector, where manufacturing processes account for the largest amount of energy consumption and carbon emissions. For this reason, energy efficiency in manufacturing facilities is increasingly important for reducing operating costs and improving profits. Using microgrids to generate local sustainable power should reduce energy consumption from the main utility grid along with energy costs and carbon emissions. Also, microgrids have the potential to serve as reliable energy generators in international locations where the utility grid is often unstable. For this research, a manufacturing process that had approximately 20 kW of peak demand was matched with a solar photovoltaic array that had a peak output of approximately 3 KW. An innovative Demand-Side Management (DSM) strategy was developed to manage the process loads as part of this smart microgrid system. The DSM algorithm managed the intermittent nature of the microgrid and the instantaneous demand of the manufacturing process. The control algorithm required three input signals; one from the microgrid indicating the availability of renewable energy, another from the manufacturing process indicating energy use as a percent of peak production, and historical data for renewable sources and facility demand. Based on these inputs the algorithm had three modes of operation: normal (business as usual), curtailment (shutting off non-critical loads), and energy storage. The results show that a real-time management of a manufacturing process with a microgrid will reduce electrical consumption and peak demand. The renewable energy system for this research was rated to provide up to 13% of the total manufacturing capacity. With actively managing the process loads with the DSM program alone, electrical consumption from the utility grid was reduced by 17% on average. An additional 24% reduction was accomplished when the microgrid

Exploring Tradeoffs in Demand-Side and Supply-Side Management of Urban Water Resources Using Agent-Based Modeling and Evolutionary Computation

Directory of Open Access Journals (Sweden)

Lufthansa Kanta

2015-11-01

Full Text Available Urban water supply systems may be managed through supply-side and demand-side strategies, which focus on water source expansion and demand reductions, respectively. Supply-side strategies bear infrastructure and energy costs, while demand-side strategies bear costs of implementation and inconvenience to consumers. To evaluate the performance of demand-side strategies, the participation and water use adaptations of consumers should be simulated. In this study, a Complex Adaptive Systems (CAS framework is developed to simulate consumer agents that change their consumption to affect the withdrawal from the water supply system, which, in turn influences operational policies and long-term resource planning. Agent-based models are encoded to represent consumers and a policy maker agent and are coupled with water resources system simulation models. The CAS framework is coupled with an evolutionary computation-based multi-objective methodology to explore tradeoffs in cost, inconvenience to consumers, and environmental impacts for both supply-side and demand-side strategies. Decisions are identified to specify storage levels in a reservoir that trigger: (1 increases in the volume of water pumped through inter-basin transfers from an external reservoir; and (2 drought stages, which restrict the volume of water that is allowed for residential outdoor uses. The proposed methodology is demonstrated for Arlington, Texas, water supply system to identify non-dominated strategies for an historic drought decade. Results demonstrate that pumping costs associated with maximizing environmental reliability exceed pumping costs associated with minimizing restrictions on consumer water use.

Demand-side management process evaluations - the management perspective

International Nuclear Information System (INIS)

Perrault, G.A.; Barrett, L.B.

1993-01-01

A demand-side management (DSM) process evaluation is a qualitative, expert assessment of how a utility marketing program is being conducted. It reviews the efficiency and effectiveness in which a utility plans, manages, executes, and monitors the delivery of DSM programs to its marketplace. Process evaluations,which includes load impact, customer satisfaction and cost-effectiveness analysis, are becoming an increasingly significant component. The process evaluation focus is on the program planning and delivery process as opposed to the energy impacts resulting from the specific measures or products of the program. Because of this process-oriented focus, such evaluations can identify important opportunities for improving the cost-effectiveness of a program without significantly changing product lines. The evaluation may identify administrative or delivery process improvements. In addition, the evaluation may identify ways of improving the degree to which the customer is satisfied with the program or the utility. Since process evaluations are usually conducted as part of a utility's mandated DSM measurement and evaluation plan, they tend to focus mainly on the stated needs of the regulator as opposed to company management. This can be a problem. Although the regulatory perspective is important, in an increasingly competitive business environment, utilities must not overlook management's business and operational needs for specific information regarding DSM program planning, control, execution, and evaluation. This paper discusses some of the conflicts that exist between the regulator's and management's needs for DSM program evaluation results and presents some approaches for assuring that both needs are met. It is organized to first discuss the scope of a process evaluation, then the evaluation issues, the management concerns, and finally reporting of results

Demand-side management and European environmental and energy goals: An optimal complementary approach

International Nuclear Information System (INIS)

Bergaentzlé, Claire; Clastres, Cédric; Khalfallah, Haikel

2014-01-01

Demand side management (DSM) in electricity markets could improve energy efficiency and achieve environmental targets through controlled consumption. For the past 10 years or so DSM programmes have registered significant results. However, detailed analysis of its real impact as observed by a large number of pilot studies suggests that such programmes need to be fine-tuned to suit clearly identified conditions. This study aims to provide recommendations for the instruments to be used to prompt demand response with a view to maximizing energy and environmental efficiencies of various countries. The present study suggests that different DSM models should be deployed depending on the specific generation mix in any given country. Beside the natural benefits from cross-borders infrastructures, DSM improves the flexibility and reliability of the energy system, absorbing some shock on generation mix. We show efficiency increases with demand response but at a decreasing rate. So, according to rebound and report effects, simple DSM tools could be preferred. - Highlights: • Demand side management could improve energy and environmental efficiency. • Several instruments should be used to achieve significant load-shedding. • DSM models should be deployed depending on generation mix. • Efficiency increases with demand response but at a decreasing rate. • Rebound and report effects reduce positive impacts

Indirect Control for Demand Side Management – A Conceptual Introduction

DEFF Research Database (Denmark)

Heussen, Kai; You, Shi; Biegel, Benjamin

2012-01-01

The concept of “indirect control” has become a relevant discussion term in relation to activation distributed and small-scale demand and generation units to provide resources for power system balancing. The term and its association with price signals has, however caused some confusion as to its...... correct definition, either as a control or a market concept. This paper aims to provide a conceptual introduction to "indirect control" for management of small and distributed demand side resources. A review of control concepts and an analysis of "indirectness" features are provided to create a framework...... for systematic classification of indirect control strategies. The concepts developed then enable a discussion of control performance and valuation of direct- and indirect control strategies....

A distributed algorithm for demand-side management: Selling back to the grid.

Science.gov (United States)

Latifi, Milad; Khalili, Azam; Rastegarnia, Amir; Zandi, Sajad; Bazzi, Wael M

2017-11-01

Demand side energy consumption scheduling is a well-known issue in the smart grid research area. However, there is lack of a comprehensive method to manage the demand side and consumer behavior in order to obtain an optimum solution. The method needs to address several aspects, including the scale-free requirement and distributed nature of the problem, consideration of renewable resources, allowing consumers to sell electricity back to the main grid, and adaptivity to a local change in the solution point. In addition, the model should allow compensation to consumers and ensurance of certain satisfaction levels. To tackle these issues, this paper proposes a novel autonomous demand side management technique which minimizes consumer utility costs and maximizes consumer comfort levels in a fully distributed manner. The technique uses a new logarithmic cost function and allows consumers to sell excess electricity (e.g. from renewable resources) back to the grid in order to reduce their electric utility bill. To develop the proposed scheme, we first formulate the problem as a constrained convex minimization problem. Then, it is converted to an unconstrained version using the segmentation-based penalty method. At each consumer location, we deploy an adaptive diffusion approach to obtain the solution in a distributed fashion. The use of adaptive diffusion makes it possible for consumers to find the optimum energy consumption schedule with a small number of information exchanges. Moreover, the proposed method is able to track drifts resulting from changes in the price parameters and consumer preferences. Simulations and numerical results show that our framework can reduce the total load demand peaks, lower the consumer utility bill, and improve the consumer comfort level.

DSM [demand-side management] opportunities in Alberta: An economist's perspective

International Nuclear Information System (INIS)

Woodward, R.S.

1990-01-01

In Alberta, utility companies are placing increasing attention on demand-side management (DSM) as one option for meeting future demand. Some basic economic principles are provided to yield a guideline on how much a utility should be spending on DSM initiatives. For the case of financial incentives to customers, it is shown that subsidies based on sound economic principles will enable the utility to charge lower overall rates to customers receiving the subsidy without raising other customers' rates. Moving outside of a well-understood market-based system and into a fully centralized planning approach to DSM eliminates a critical link between utilities and their customers. In Alberta, DSM measures appropriate in other regions will not be appropriate due to the province's unique supply and demand characteristics. Most of Alberta's electricity supply comes from low-cost coal-fired plants. On the demand-side, there is a significant concentration of large industrial and commercial consumers, notably in the oil and gas industry, and there is essentially no demand for electric heating in homes since natural gas is very abundant. The Alberta integrated power system currently operates at a load factor of ca 77%, reflecting the large industrial demand and the absence of a winter peaking effect associated with electrical heating requirements. A relatively small difference in embedded and incremental electricity supply costs means that utilities have little to spend on DSM programs. The identification of cost-effective DSM opportunities, most of which are likely to be found in the industrial sector, requires a considerable amount of detailed information on consumer behavior and close collaboration between utility and customer

Demand side management. Benefits and challenges

International Nuclear Information System (INIS)

Strbac, Goran

2008-01-01

In this paper, the major benefits and challenges of electricity demand side management (DSM) are discussed in the context of the UK electricity system. The relatively low utilisation of generation and networks (of about 50%) means that there is significant scope for DSM to contribute to increasing the efficiency of the system investment. The importance of the diversity of electricity load is discussed and the negative effects of DSM on load diversity illustrated. Ageing assets, the growth in renewable and other low-carbon generation technologies and advances in information and communication technologies are identified as major additional drivers that could lead to wider applications of DSM in the medium term. Potential benefits of DSM are discussed in the context of generation and of transmission and distribution networks. The provision of back-up capacity by generation may not be efficient as it will be needed relatively infrequently, and DSM may be better placed to support security. We also present an analysis of the value of DSM in balancing generation and demand in a future UK electricity system with significant variable renewable generation. We give a number of reasons for the relatively slow uptake of DSM, particularly in the residential, commercial and small business sectors. They include a lack of metering, information and communication infrastructure, lack of understanding of the benefits of DSM, problems with the competitiveness of DSM when compared with traditional approaches, an increase in the complexity of system operation and inappropriate market incentives. (author)

Decision support program for congestion management using demand side flexibility

DEFF Research Database (Denmark)

Esmat, Ayman; Pinson, Pierre; Usaola, Julio

2017-01-01

In the past decades, Distribution System Operators (DSOs) have been mitigating distribution networks (DNs) contingencies by opting to grid reinforcements. However, this approach is not always cost and time efficient. Demand Side Flexibility (DSF) is one of the recent alternatives used in DNs cong...... effect is taken into consideration as well as the uncertain behavior of customers. Finally, the distribution grid of the Danish Bornholm Island is used to illustrate the merits of the DSP. The total cost incurred by the DSO is calculated and presented.......In the past decades, Distribution System Operators (DSOs) have been mitigating distribution networks (DNs) contingencies by opting to grid reinforcements. However, this approach is not always cost and time efficient. Demand Side Flexibility (DSF) is one of the recent alternatives used in DNs...... congestion management. Consequently, new market players such as aggregators are needed to handle DSF transaction between customers and DSOs. This paper proposes and models a decision support program (DSP) to optimize the total cost charged by the DSO for using DSF services. Moreover, the energy rebound...

Demand Side Management for the European Supergrid: Occupancy variances of European single-person households

International Nuclear Information System (INIS)

Torriti, Jacopo

2012-01-01

The prospect of a European Supergrid calls for research on aggregate electricity peak demand and Europe-wide Demand Side Management. No attempt has been made as yet to represent a time-related demand curve of residential electricity consumption at the European level. This article assesses how active occupancy levels of single-person households vary in single-person household in 15 European countries. It makes use of occupancy time-series data from the Harmonised European Time Use Survey database to build European occupancy curves; identify peak occupancy periods; construct time-related electricity demand curves for TV and video watching activities and assess occupancy variances of single-person households. - Highlights: ► Morning peak occupancies of European single households tale place between 7h30 and 7h40. ► Evening peaks take place between 20h10 and 20h20. ► TV and video activities during evening peaks make up about 3.1 GWh of European peak electricity load. ► Baseline and peak occupancy variances vary across countries. ► Baseline and peak occupancy variances can be used as input for Demand Side Management choices.

Evaluation of demand-side management programs

International Nuclear Information System (INIS)

Kolbe, A.L.; O'Loughlin, M.P.

1990-01-01

Over the past few years, the attention accorded to demand-side management (DSM) measures has called into question the traditional cost minimization approach for evaluating such programs. Two broad approaches to DSM seem to be generally used: one examining the problem from multiple perspectives and the other including various practical methods used in-house by utility planners. Whatever the standard used to evaluate DSM, there remains at least one problem which cannot be quantified. The customers who participate in a DSM program cannot only take into account the effects of DSM on their electricity bills; their comfort can also be affected. This lowering of comfort constitutes a legitimate cost which can explain why some apparently sensible DSM measures are not adopted. A method is proposed to incorporate this cost. It establishes a way to evaluate DSM program tradeoffs that, from the perspective of standard economic theory, maximizes social welfare; explains why at least one of the perspectives in the multiple perspective approach needs to be modified to incorporate all customer costs; and outlines how the proposed standard can be implemented. 8 refs

Distributed Demand Side Management with Battery Storage for Smart Home Energy Scheduling

Directory of Open Access Journals (Sweden)

Omowunmi Mary Longe

2017-01-01

Full Text Available The role of Demand Side Management (DSM with Distributed Energy Storage (DES has been gaining attention in recent studies due to the impact of the latter on energy management in the smart grid. In this work, an Energy Scheduling and Distributed Storage (ESDS algorithm is proposed to be installed into the smart meters of Time-of-Use (TOU pricing consumers possessing in-home energy storage devices. Source of energy supply to the smart home appliances was optimized between the utility grid and the DES device depending on energy tariff and consumer demand satisfaction information. This is to minimize consumer energy expenditure and maximize demand satisfaction simultaneously. The ESDS algorithm was found to offer consumer-friendly and utility-friendly enhancements to the DSM program such as energy, financial, and investment savings, reduced/eliminated consumer dissatisfaction even at peak periods, Peak-to-Average-Ratio (PAR demand reduction, grid energy sustainability, socio-economic benefits, and other associated benefits such as environmental-friendliness.

Determining optimum levels of DSM [demand-side management] as a supply-side resource

International Nuclear Information System (INIS)

Giles, S.H.; Mitchell, E.D.

1990-01-01

San Diego Gas and Electric Company (SDGE) recommends the evaluation of demand-side management as a supply-side resource. The advantages of concurrent economic analysis of DSM options with other traditional sources represents a significant improvement over analysis either before or after the development of a resource plan. The evaluation of utility-sponsored DSM programs that provide system benefits that include deferment of capacity additions and improvements in more efficient system operation should be evaluated side-by-side with traditional resources that provide similar benefits. The utility decision to either provide capital costs to construct a power plant or make demand payments for a power purchase is directly analogous to the decision to provide funding for a DSM program that would defer these same investments. Both types of decision represent utility control over investment decisions that allow the utility to provide reliable, low-cost power to its customers. SDGE has also had experience with using generation expansion scenarios to test different levels of pre-selected packages of DSM programs, attempting to evaluate the total costs of system expansion for each of the different packages. This method was fraught with problems, and the best information that could be gained was if the selection of DSM packages happened to bracket a lower cost scenario, when it could reasonably be assumed that both smaller and larger levels of DSM were not as cost effective as the intermediate level. However, in many cases the selection of DSM programs did not produce this result and the important question of whether individual DSM programs were worthwhile when evaluated individually, or whether the lowest cost scenario would be improved with more or less DSM, could not be answered

Demand-side management and demand response in the Ontario energy sectors

International Nuclear Information System (INIS)

2004-01-01

A directive from the former Minister of Energy was received by the Ontario Energy Board (OEB), directing the Board to consult with stakeholders on options for the delivery of demand-side management (DSM) and demand response (DR) activities within the electricity sector, including the role of local distribution companies in such activities. The implementation costs were to be balanced with the benefits to both consumers and the entire system. The scope of the review was expanded by the Board to include the role of gas distribution companies in DSM. A consultation process was implemented and stakeholders were invited to participate. A series of recommendations was made, including: (1) a hybrid framework utilizing market-based and public-policy approaches should deliver DSM and DR activities in Ontario's energy markets, (2) DSM and DR activities should come under the responsibility of a central agency, (3) DSM and DR activities should be coordinated through cooperation between the Ministry of Energy, the Independent Electricity Market Operator (IMO) and the Ontario Energy Board, (4) regulatory mechanisms to induce gas distributors, electricity transmitters and electricity distributors to reduce distribution system losses should be put in place, (5) all electricity consumers should fund electricity DSM and some retail DR initiatives through a transparent, non-bypassable consumption charge, and (6) the Board should design, develop and deliver information to consumers regarding energy conservation, energy efficiency, load management, and cleaner sources of energy. refs., 4 figs

R and D options for demand side management in Japanese electric utilities

International Nuclear Information System (INIS)

Yamamoto, Takahiko

1996-01-01

Japanese electric demand has been steadily increasing in accordance with the economic growth. However, Japanese electric utilities are facing several problems; increasing construction cost of power facilities, siting constraints and the environmental issue of greenhouse gas emissions. To overcome these problems, electric utilities have been promoting demand-side-management (DSM) activities as well as supplier-side measures, with some presently being carried out through promoting energy conservation technologies and introducing electric tariff options of specific contracts for residential/commercial and industrial consumers. Japanese electric utilities have been carrying out R and D for the future, in particular, energy storage and heat storage which contribute to the improvement of load factor. In this paper, I would like to outline the R and D options for DSM in Japan. (author)

A distributed algorithm for demand-side management: Selling back to the grid

Directory of Open Access Journals (Sweden)

Milad Latifi

2017-11-01

Full Text Available Demand side energy consumption scheduling is a well-known issue in the smart grid research area. However, there is lack of a comprehensive method to manage the demand side and consumer behavior in order to obtain an optimum solution. The method needs to address several aspects, including the scale-free requirement and distributed nature of the problem, consideration of renewable resources, allowing consumers to sell electricity back to the main grid, and adaptivity to a local change in the solution point. In addition, the model should allow compensation to consumers and ensurance of certain satisfaction levels. To tackle these issues, this paper proposes a novel autonomous demand side management technique which minimizes consumer utility costs and maximizes consumer comfort levels in a fully distributed manner. The technique uses a new logarithmic cost function and allows consumers to sell excess electricity (e.g. from renewable resources back to the grid in order to reduce their electric utility bill. To develop the proposed scheme, we first formulate the problem as a constrained convex minimization problem. Then, it is converted to an unconstrained version using the segmentation-based penalty method. At each consumer location, we deploy an adaptive diffusion approach to obtain the solution in a distributed fashion. The use of adaptive diffusion makes it possible for consumers to find the optimum energy consumption schedule with a small number of information exchanges. Moreover, the proposed method is able to track drifts resulting from changes in the price parameters and consumer preferences. Simulations and numerical results show that our framework can reduce the total load demand peaks, lower the consumer utility bill, and improve the consumer comfort level. Keywords: Energy, Systems engineering, Electrical engineering

Demand side management in households. Potentials and restraints of short-term power supply; Demand Side Management in Haushalten. Potenziale und Hemmnisse fuer kurzfristige Leistungsbereitstellung

Energy Technology Data Exchange (ETDEWEB)

Roon, Serafin von; Gobmaier, Thomas [FfE Forschungsstelle fuer Energiewirtschaft e.V., Muenchen (Germany); Huck, Malte

2010-07-01

Within the project ''Wind energy - balancing forecast errors'' we examine potentials, restraints and costs of various options for balancing forecast errors of wind power generation. One possibility of providing this backup power could be to practice Demand Side Management (DSM) of household appliances. The integration of these appliances in a DSM network is facilitated by standardized data transmission procedures and the increasing deployment of microprocessors. Due to the low power consumption of the switchable devices no DSM measures are implemented in the household sector so far, despite the numerous appliances. (orig.)

Renewable generation versus demand-side management. A comparison for the Spanish market

International Nuclear Information System (INIS)

Roldán Fernández, Juan Manuel; Burgos Payán, Manuel; Riquelme Santos, Jesús Manuel; Trigo García, Ángel Luis

2016-01-01

Conventionally the required instantaneous balance generation-load is achieved by adjusting production to fit variable consumer demand. Nowadays, a significant and increasing segment of generation is renewable. But renewable production cannot be scheduled on request since its generation is dependent on nature (wind, sun, …). In this context, demand-side management (DSM) would help since it would be advisable for part of the flexibility to be provided by the demand. The integration of renewable production and demand-side management (DSM), are compared in this work for Spain throughout 2008–2014. First a qualitative model, based on the linearization of the wholesale market, is employed to explore some hypotheses. A set of scenarios are then examined to quantify the main effects on the market. The results show that DSM exhibits the best performance in terms of economic efficiency and environmental sustainability, as well as for the reduction of load peaks and losses in the system, what suggests the convenience of promoting plans for the replacement of equipment with other more efficient as well as the implementation of real-time tariffs. - Highlights: •The impact of the integration of renewable production versus DSM has been compared. •Merit-order effect related to energy efficiency and to load-shifting is identified. •Large industries achieve energy efficiency with less CAPEX than renewable generation. •Load-shifting cycle yields a reduction of the traded energy and the economic volume.

R and D options for demand side management in Japanese electric utilities

International Nuclear Information System (INIS)

Yamamoto, T.

1995-01-01

Japanese electric utilities are facing several problems: increasing construction cost of power facilities, siting constraints and the environmental issue of greenhouse gas emissions. To overcome these problems, electric utilities have been promoting demand-side-management (DSM) activities as well as supplier-side measures, with some presently being carried out through promoting energy conservation technologies and introducing tariff options for residential/commercial and industrial consumers. R and D works have been carried out on various fields such as energy storage and heat storage which contribute to the improvement of the load factor. 5 figs., 2 tabs

Development of assessment model for demand-side management investment programs in Korea

International Nuclear Information System (INIS)

Lee, Deok Ki; Park, Sang Yong; Park, Soo Uk

2007-01-01

The goal of this study is the development of the assessment model for demand-side management investment programs (DSMIPs) in the areas of natural gas and district heating. Demand-side management (DSM) is the process of managing the consumption of energy to optimize available and planned generation resources and DSMIPs are the actions conducted by energy suppliers to promote investment in the DSM. In this research, the analytic hierarchy process (AHP) method was used to develop a scientific and rational assessment model for DSMIPs. To apply the AHP method, assessment indicators for the assessment have been identified by using the concept of 'plan, do, see' and the decision-making hierarchy was established. Then AHP model was developed to set up the priorities of assessment indicators and a survey of experts from government and energy suppliers was carried out. Finally, the priorities of assessment indicators were calculated based on the result of survey using the AHP method. The assessment model developed from this research will actually be used to assess the results of DSMIPs, which is being carried out by Korea gas corporation (KOGAS) and Korea district heating corporation (KDHC). The use of the assessment model developed by this research is expected to contribute to enhance efficiency in planning, execution, and assessment of DSMIPs

Demand side participation for frequency containment in the web of cells architecture

NARCIS (Netherlands)

Syed, M.H.; Burt, G.M.; Kok, J.K.; Hulst, R. d

2015-01-01

A large number of demand side management schemes have been proposed in literature for provision of frequency control ancillary services to the network. However, it is assumed that all the flexible devices within the network are managed and controlled under one demand side management (DSM) scheme. In

Intelligent demand side management of residential building energy systems

Science.gov (United States)

Sinha, Maruti N.

Advent of modern sensing technologies, data processing capabilities and rising cost of energy are driving the implementation of intelligent systems in buildings and houses which constitute 41% of total energy consumption. The primary motivation has been to provide a framework for demand-side management and to improve overall reliability. The entire formulation is to be implemented on NILM (Non-Intrusive Load Monitoring System), a smart meter. This is going to play a vital role in the future of demand side management. Utilities have started deploying smart meters throughout the world which will essentially help to establish communication between utility and consumers. This research is focused on investigation of a suitable thermal model of residential house, building up control system and developing diagnostic and energy usage forecast tool. The present work has considered measurement based approach to pursue. Identification of building thermal parameters is the very first step towards developing performance measurement and controls. The proposed identification technique is PEM (Prediction Error Method) based, discrete state-space model. The two different models have been devised. First model is focused toward energy usage forecast and diagnostics. Here one of the novel idea has been investigated which takes integral of thermal capacity to identify thermal model of house. The purpose of second identification is to build up a model for control strategy. The controller should be able to take into account the weather forecast information, deal with the operating point constraints and at the same time minimize the energy consumption. To design an optimal controller, MPC (Model Predictive Control) scheme has been implemented instead of present thermostatic/hysteretic control. This is a receding horizon approach. Capability of the proposed schemes has also been investigated.

Development of planning methods for demand-side management (DSM)

International Nuclear Information System (INIS)

Kaerkkaeinen, S.; Kekkonen, V.; Rissanen, P.

1995-01-01

The interest of utilities and governmental agencies in Demand-side management (IDSM) and Integrated Resource Planning (IRP) has increased during recent years also in Finland. From the governmental point of view, the main reason for this has been concern about the environmental effects of electricity supply and consumption. Utilities are mainly interested in cost reductions in electricity supply and distribution caused by DSM. Also improved service to the customer due to DSM has increasing value to utilities. In this project, the main target has been to develop and assess methods for DSM planning from the utility point of view. The final goal is to integrate these methods into the strategic planning of electric utilities

A Smart Grid Framework for Optimally Integrating Supply-Side, Demand-Side and Transmission Line Management Systems

Directory of Open Access Journals (Sweden)

Chukwuka Monyei

2018-04-01

Full Text Available A coordinated centralized energy management system (ConCEMS is presented in this paper that seeks to integrate for optimal grid operation—the supply side energy management system (SSEMS, home energy management system (HEMS and transmission line management system (TLMS. ConCEMS in ensuring the optimal operation of an IEEE 30-bus electricity network harmonizes the individual objective function of SSEMS, HEMS and TLMS to evolve an optimal dispatch of participating demand response (DR loads that does not violate transmission line ampacity limits (TLMS constraint while minimizing consumer cost (HEMS constraint and supply side operations cost (SSEMS constraint. An externally constrained genetic algorithm (ExC-GA that is influenced by feedback from TLMS is also presented that intelligently varies the dispatch time of participating DR loads to meet the individual objective functions. Hypothetical day ahead dynamic pricing schemes (Price1, Price2 and Price3 have also been adopted alongside an existing time of use (Price0 pricing scheme for comparison and discussion while a dynamic thermal line rating (DTLR algorithm has also been incorporated to dynamically compute power limits based on real time associated data.

Modeling Supermarket Refrigeration Systems for Demand-Side Management

Directory of Open Access Journals (Sweden)

Jakob Stoustrup

2013-02-01

Full Text Available Modeling of supermarket refrigeration systems for supervisory control in the smart grid is presented in this paper. A modular modeling approach is proposed in which each module is modeled and identified separately. The focus of the work is on estimating the power consumption of the system while estimating the cold reservoir temperatures as well. The models developed for each module as well as for the overall integrated system are validated by real data collected from a supermarket in Denmark. The results show that the model is able to estimate the actual electrical power consumption with a high fidelity. Moreover a simulation benchmark is introduced based on the produced model for demand-side management in smart grid. Finally, a potential application of the proposed benchmark in direct control of the power/energy consumption is presented by a simple simulation example.

Demand-side management pricing options in electric utilities

International Nuclear Information System (INIS)

Sardana, P.; Herman, P.

1990-01-01

In 1989 Ontario Hydro implemented optional time-of-use (TOU) rates at the wholesale level for all municipal utilities in the province. At the same time, mandatory TOU rates were implemented for large users (customers with loads in excess of 5 MW) served by municipal utilities and Ontario Hydro's direct customers. To fully explore the potential of rate structures as demand-side management (DSM) tools, Ontario Hydro retained a consulting firm to carry out a survey of innovative rate structures in other jurisdications. The survey was intended to identify: the status quo of rate structures in other jurisdictions that were designed specifically to encourage DSM; a profile of the cost basis of the rate structures, for example whether traditional embedded cost of service analyses or contentious methods such as marginal cost pricing were used; whether innovative rates have been successful, and customer reactions and attitudes; and how innovative rates fit into the overall strategy of the utilities. It was found that TOU, interruptible and end-use targeted rates are the rate structures of choice for many utilities. Most are concerned with deferring capacity, reducing peak demand, and shifting load out of peak periods. Most utilities report success with their programs and satisfaction with the present form of the programs. 5 tabs

US EPA's photovoltaic demand-side management project. Report for September 1992-July 1993

International Nuclear Information System (INIS)

Kern, E.C.; Spiegel, R.J.

1993-01-01

The paper discusses an investigation of how photovoltaics (PV) may be used as both a pollution-mitigating energy replacement for fossil fuels and a demand-side management (DSM) option to reduce peak electrical demands of commercial and residential buildings. Eleven electric utilities are partners in this first nationwide demonstration of PV DSM. The approach is to install and monitor standardized PV systems in diverse geographic areas with varying solar energy resource and electric power demand, production, and cost conditions. The systems are being monitored for a year to record direct and diffuse irradiance, ambient air temperature, PV power generation, and building loads. Utilities are providing the electric system operations data needed to determine the pollution mitigation and peak demand reduction that can result from the PV electrical power generation

Hawaii demand-side management resource assessment. Final report: DSM opportunity report

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-08-01

The Hawaii Demand-Side Management Resource Assessment was the fourth of seven projects in the Hawaii Energy Strategy (HES) program. HES was designed by the Department of Business, Economic Development, and Tourism (DBEDT) to produce an integrated energy strategy for the State of Hawaii. The purpose of Project 4 was to develop a comprehensive assessment of Hawaii`s demand-side management (DSM) resources. To meet this objective, the project was divided into two phases. The first phase included development of a DSM technology database and the identification of Hawaii commercial building characteristics through on-site audits. These Phase 1 products were then used in Phase 2 to identify expected energy impacts from DSM measures in typical residential and commercial buildings in Hawaii. The building energy simulation model DOE-2.1E was utilized to identify the DSM energy impacts. More detailed information on the typical buildings and the DOE-2.1E modeling effort is available in Reference Volume 1, ``Building Prototype Analysis``. In addition to the DOE-2.1E analysis, estimates of residential and commercial sector gas and electric DSM potential for the four counties of Honolulu, Hawaii, Maui, and Kauai through 2014 were forecasted by the new DBEDT DSM Assessment Model. Results from DBEDTs energy forecasting model, ENERGY 2020, were linked with results from DOE-2.1E building energy simulation runs and estimates of DSM measure impacts, costs, lifetime, and anticipated market penetration rates in the DBEDT DSM Model. Through its algorithms, estimates of DSM potential for each forecast year were developed. Using the load shape information from the DOE-2.1E simulation runs, estimates of electric peak demand impacts were developed. 10 figs., 55 tabs.

Supply shortage forecast in Ontario: The significance of demand-side management (DSM); its tools and techniques

International Nuclear Information System (INIS)

Saini, S.

2004-01-01

Aspects of the recent report by the Ontario Electricity Conservation and Supply Task Force and Independent Market Operator which forecasts acute power supply shortages in Ontario, are discussed. Immediate action is recommended to avert the problem. The principal recommendation concerns the adoption of Demand Side Management as a tool to reduce the widening gap between supply and demand, citing supply shortage, imports, high prices, deregulated market and environmental concerns as the driving forces which push for the adoption of DSM. It is claimed that DSM, through its tools such as Demand/Load Response Programs and Time-of-Use rates has the capacity to create the necessary balance between supply and demand more efficiently, and in a more timely fashion than supply side management. The demand for adoption of DSM is justified on the basis of a careful examination of the magnitude and significance of each of the driving forces affecting the electricity supply in Ontario, as well as the benefits and techniques of DSM designed to manage power shortages. Energy Conservation and Efficiency and Demand/Load Response Programs are discussed as the principal DSM techniques, while Dynamic/Real Time Pricing, Time-of-Use Rates, Automated /Smart Metering, Web-based/Communication Systems, Reliability-based Programs, Market/Price-based programs, and Types of Load Control are described as the principal tools used by DSM. DSM program approaches and strategies are also reviewed, along with a brief list of successful examples of DSM applications. 3 figs

Supply shortage forecast in Ontario: The significance of demand-side management (DSM); its tools and techniques

Energy Technology Data Exchange (ETDEWEB)

Saini, S.

2004-06-01

Aspects of the recent report by the Ontario Electricity Conservation and Supply Task Force and Independent Market Operator which forecasts acute power supply shortages in Ontario, are discussed. Immediate action is recommended to avert the problem. The principal recommendation concerns the adoption of Demand Side Management as a tool to reduce the widening gap between supply and demand, citing supply shortage, imports, high prices, deregulated market and environmental concerns as the driving forces which push for the adoption of DSM. It is claimed that DSM, through its tools such as Demand/Load Response Programs and Time-of-Use rates has the capacity to create the necessary balance between supply and demand more efficiently, and in a more timely fashion than supply side management. The demand for adoption of DSM is justified on the basis of a careful examination of the magnitude and significance of each of the driving forces affecting the electricity supply in Ontario, as well as the benefits and techniques of DSM designed to manage power shortages. Energy Conservation and Efficiency and Demand/Load Response Programs are discussed as the principal DSM techniques, while Dynamic/Real Time Pricing, Time-of-Use Rates, Automated /Smart Metering, Web-based/Communication Systems, Reliability-based Programs, Market/Price-based programs, and Types of Load Control are described as the principal tools used by DSM. DSM program approaches and strategies are also reviewed, along with a brief list of successful examples of DSM applications. 3 figs.

Optimization Models and Methods for Demand-Side Management of Residential Users: A Survey

Directory of Open Access Journals (Sweden)

Antimo Barbato

2014-09-01

Full Text Available The residential sector is currently one of the major contributors to the global energy balance. However, the energy demand of residential users has been so far largely uncontrollable and inelastic with respect to the power grid conditions. With the massive introduction of renewable energy sources and the large variations in energy flows, also the residential sector is required to provide some flexibility in energy use so as to contribute to the stability and efficiency of the electric system. To address this issue, demand management mechanisms can be used to optimally manage the energy resources of customers and their energy demand profiles. A very promising technique is represented by demand-side management (DSM, which consists in a proactive method aimed at making users energy-efficient in the long term. In this paper, we survey the most relevant studies on optimization methods for DSM of residential consumers. Specifically, we review the related literature according to three axes defining contrasting characteristics of the schemes proposed: DSM for individual users versus DSM for cooperative consumers, deterministic DSM versus stochastic DSM and day-ahead DSM versus real-time DSM. Based on this classification, we provide a big picture of the key features of different approaches and techniques and discuss future research directions.

Supply- and demand-side effects of power sector planning with demand-side management options and SO2 emission constraints

International Nuclear Information System (INIS)

Shrestha, R.M.; Marpaung, C.O.P.

2005-01-01

This paper examines the implications of SO 2 emission mitigation constraints in the power sector planning in Indonesia--a developing country--during 2003-2017 from a long term integrated resource planning perspective. A decomposition model is developed to assess the contributions of supply- and demand-side effects to the total changes in CO 2 , SO 2 and NO x emissions from the power sector due to constraints on SO 2 emissions. The results of the study show that both the supply- and demand-side effects would act towards the reduction of CO 2 , SO 2 and NO x emissions. However, the supply-side effect would play the dominant role in emission mitigations from the power sector in Indonesia. The average incremental SO 2 abatement cost would increase from US$ 970 to US$ 1271 per ton of SO 2 , while electricity price would increase by 2-18% if the annual SO 2 emission reduction target is increased from 10% to 25%

The energy efficiency and demand side management programs as implemented by the energy efficiency division of the department of energy

International Nuclear Information System (INIS)

Anunciacion, Jesus C.

1997-01-01

The thrust of the Philippine energy sector. specifically the government side, is to involve the active participation of not only all the government agencies involved in energy activities but the private sector as well. This participation shall mean technical and financial participation, directly and indirectly. The Department of Energy is on the process involving the continuing update and development of a Philippine Energy Plan (PEP) which has a 30-year time scope, which will help the country monitor and determine energy supply and demand vis-a-vis the growing demands of an industrializing country like the Philippines. Among the most vital component of the PEP is the thrust to pursue national programs for energy efficiency and demand-side management. Seven energy efficiency sub-programs have been identified for implementation, with a target savings of 623 million barrels of fuel oil equivalent (MMBFOE). A cumulative net savings of 237 billion pesos shall be generated against a total investment cost of 54.5 billion pesos. The Philippine energy sector will continue to develop and implement strategies to promote the efficient utilization of energy which will cover all aspects of the energy industry. The plan is focussed on the training and education of the various sectors on the aspects involved in the implementation of energy efficiency and demand-side management elements on a more aggressive note. The implementation of technical strategies by the department will continue on a higher and more extensive level, these are: energy utilization monitoring, consultancy and engineering services, energy efficiency testing and labelling program, and demand-side management programs for each sector. In summary, the PEP, as anchored in energy efficiency and demand-side management tools, among others, will ensure a continuous energy supply at affordable prices while incorporating environmental and social considerations. (author)

DEMONSTRATION OF THE ENVIRONMENTAL AND DEMAND-SIDE MANAGEMENT BENEFITS OF GRID-CONNECTED PHOTOVOLTAIC POWER SYSTEMS

Science.gov (United States)

This study investigated the pollutant emission reduction and demand-side management potential of 16 photovoltaic (PV) systems installed across the U.S. in 1993 and 1994. The project was sponsored by the U.S. Environmental Protection Agency (EPA) and 11 electric utilities. This ar...

Who should pay for demand-side management programs?

International Nuclear Information System (INIS)

Flaim, T.

1992-01-01

Traditional utility resource planning involves taking the load forecast as a given and then determining the additional supply resources expected to serve that load at minimum cost and optimal levels of reliability. With integrated planning, the goal is still to balance supply and demand, but in a way that is most cost effective given all possible ways to serve customers' energy service needs. The new element in integrated resource planning is demand side management (DSM) or activities aimed at altering the quantity of energy customers use and/or the timing of their consumption. This paper discusses how DSM works to accomplish energy conservation and how it affects the rate structure. It also goes on to discuss how a utility can optimize the participation in a conservation program so that no particular group might have to carry the brunt of a rate increase. These suggestions include aligning rates to accurately reflect marginal costs; require participating customers to pay as many program costs as are possible; where participating customers can't pay full cost of a program, restrict costs to those groups who are eligible to participate; and offer a 'reverse shared-savings' program to the largest customers. The paper goes on to discuss electric-to-gas fuel switching and what customers should carry the cost burden for this type of switching

Demand-side management: The perspective of a combination utility

International Nuclear Information System (INIS)

Packard, C.P.

1993-01-01

During the 1980's, Baltimore Gas ampersand Electric (BG ampersand E) met part of the rapid growth in demand for electricity in its service territory by implementing cost-effective demand-side management (DSM) programs--specifically, peak shaving and load shifting strategies. BG ampersand E's focus in the 1990's has been expanded to include all DSM options with an increasing emphasis on those which promote overall 1 energy efficiency or strategic conservation. This change in focus is being driven by Federal legislation, state regulatory requirements and the perceived potential benefits for both the customer and the Company. Current activities related to DSM include involvement in a Collaborative Process to design cost-effective electric and gas conservation programs for all customer classes--low-income, residential, commercial and industrial. Program design consists of four steps: (1) data gathering and technology assessment; (2) development of program concepts; (3) detailed program design and (4) monitoring and evaluation. Significant reductions in the projected peaks as well as in sales in future years are the anticipated results of our efforts. As a combination utility, unique opportunities and challenges face BG ampersand E: fuel switching, eligibility of non-full requirements customers, and energy options for customers

Demand-Side Energy Management Based on Nonconvex Optimization in Smart Grid

Directory of Open Access Journals (Sweden)

Kai Ma

2017-10-01

Full Text Available Demand-side energy management is used for regulating the consumers’ energy usage in smart grid. With the guidance of the grid’s price policy, the consumers can change their energy consumption in response. The objective of this study is jointly optimizing the load status and electric supply, in order to make a tradeoff between the electric cost and the thermal comfort. The problem is formulated into a nonconvex optimization model. The multiplier method is used to solve the constrained optimization, and the objective function is transformed to the augmented Lagrangian function without constraints. Hence, the Powell direction acceleration method with advance and retreat is applied to solve the unconstrained optimization. Numerical results show that the proposed algorithm can achieve the balance between the electric supply and demand, and the optimization variables converge to the optimum.

Distributed Optimisation Algorithm for Demand Side Management in a Grid-Connected Smart Microgrid

Directory of Open Access Journals (Sweden)

Omowunmi Mary Longe

2017-06-01

Full Text Available The contributions of Distributed Energy Generation (DEG and Distributed Energy Storage (DES for Demand Side Management (DSM purposes in a smart macrogrid or microgrid cannot be over-emphasised. However, standalone DEG and DES can lead to under-utilisation of energy generation by consumers and financial investments; in grid-connection mode, though, DEG and DES can offer arbitrage opportunities for consumers and utility provider(s. A grid-connected smart microgrid comprising heterogeneous (active and passive smart consumers, electric vehicles and a large-scale centralised energy storage is considered in this paper. Efficient energy management by each smart entity is carried out by the proposed Microgrid Energy Management Distributed Optimisation Algorithm (MEM-DOA installed distributively within the network according to consumer type. Each smart consumer optimises its energy consumption and trading for comfort (demand satisfaction and profit. The proposed model was observed to yield better consumer satisfaction, higher financial savings, and reduced Peak-to-Average-Ratio (PAR demand on the utility grid. Other associated benefits of the model include reduced investment on peaker plants, grid reliability and environmental benefits. The MEM-DOA also offered participating smart consumers energy and tariff incentives so that passive smart consumers do not benefit more than active smart consumers, as was the case with some previous energy management algorithms.

Adaptive heat pump and battery storage demand side energy management

Science.gov (United States)

Sobieczky, Florian; Lettner, Christian; Natschläger, Thomas; Traxler, Patrick

2017-11-01

An adaptive linear model predictive control strategy is introduced for the problem of demand side energy management, involving a photovoltaic device, a battery, and a heat pump. Moreover, the heating influence of solar radiation via the glass house effect is considered. Global sunlight radiation intensity and the outside temperature are updated by weather forecast data. The identification is carried out after adapting to a time frame witch sufficiently homogeneous weather. In this way, in spite of the linearity an increase in precision and cost reduction of up to 46% is achieved. It is validated for an open and closed loop version of the MPC problem using real data of the ambient temperature and the global radiation.

Ensuring the security of electricity supply in Ontario: is demand-side management the answer?

International Nuclear Information System (INIS)

Chuddy, B.

2004-01-01

This paper examines the issues relating to ensuring the security of electricity supply in Ontario. In particular, it focuses on demand-side management as a means of achieving these objectives. The solution involves both conservation and supply. It is therefore critical that there be investment in new supply with multiple buyers/sellers. regulatory environment and pricing could encourage conservation

Optimal Load Response to Time-of-Use Power Price for Demand Side Management in Denmark

DEFF Research Database (Denmark)

Hu, Weihao; Chen, Zhe; Bak-Jensen, Birgitte

2010-01-01

-of-use power price for demand side management in order to save the energy costs as much as possible. 3 typical different kinds of loads (industrial load, residential load and commercial load) in Denmark are chosen as study cases. The energy costs decrease up to 9.6% with optimal load response to time......-of-use power price for different loads. Simulation results show that the optimal load response to time-of-use power price for demand side management generates different load profiles and reduces the load peaks. This kind of load patterns may also have significant effects on the power system normal operation.......Since the hourly spot market price is available one day ahead in Denmark, the price could be transferred to the consumers and they may shift their loads from high price periods to the low price periods in order to save their energy costs. This paper presents a load optimization method to time...

A Novel Prosumer-Based Energy Sharing and Management (PESM Approach for Cooperative Demand Side Management (DSM in Smart Grid

Directory of Open Access Journals (Sweden)

Sohail Razzaq

2016-10-01

Full Text Available Increasing population and modern lifestyle have raised energy demands globally. Demand Side Management (DSM is one important tool used to manage energy demands. It employs an advanced power infrastructure along with bi-directional information flow among utilities and users in order to achieve a balanced load curve and minimize demand-supply mismatch. Traditionally, this involves shifting the electricity demand from peak hours to other times of the day in an optimized manner. Multiple users equipped with renewable resources work in coordination with each other in order to achieve mutually beneficial energy management. This, in turn, has generated the concept of cooperative DSM. Such users, called prosumers, consume and produce energy using renewable resources (solar, wind etc.. Prosumers with surplus energy sell to the grid as well as to other consumers. In this paper, a novel Prosumer-based Energy Sharing and Management (PESM scheme for cooperative DSM has been proposed. A simulation model has been developed for testing the proposed method. Different variations of the proposed methodology have been experimented with different criteria. The results show that the proposed energy sharing scheme achieves DSM purposes in a useful manner.

Demand side management scheme in smart grid with cloud computing approach using stochastic dynamic programming

Directory of Open Access Journals (Sweden)

S. Sofana Reka

2016-09-01

Full Text Available This paper proposes a cloud computing framework in smart grid environment by creating small integrated energy hub supporting real time computing for handling huge storage of data. A stochastic programming approach model is developed with cloud computing scheme for effective demand side management (DSM in smart grid. Simulation results are obtained using GUI interface and Gurobi optimizer in Matlab in order to reduce the electricity demand by creating energy networks in a smart hub approach.

Employee retention and integrated disability management practices as demand side factors.

Science.gov (United States)

Habeck, Rochelle; Hunt, Allan; Rachel, Colleen Head; Kregel, John; Chan, Fong

2010-12-01

Demand-side employment research on company policies and practices related to retention and absence and disability management (ADM) can contribute to our understanding of employment issues related to people with disabilities from the employers' perspective. To examine company ADM and retention practices and their effectiveness, as well as how these company policies and practices might influence hiring of people with disabilities. Disability Management Employer Coalition employer members (N = 650) were surveyed by internet and the survey data were analyzed using descriptive statistics, correlation, and multiple regression. Ninety-five participants responded to the survey resulting in a response rate of 14%. Retention practice was found to be associated with retention effectiveness (r = .39, P ideas and involvement of employees, and assuring they know how their work and performance support the mission. ADM practice was related to improving health and managing health conditions (r = .26, P companies.

Electricity decision-making: New techniques for calculating statewide economic impacts from new power supply and demand-side management programs

Science.gov (United States)

Tegen, Suzanne Isabel Helmholz

This dissertation introduces new techniques for calculating and comparing statewide economic impacts from new coal, natural gas and wind power plants, as well as from demand-side management programs. The impetus for this work was two-fold. First, reviews of current literature and projects revealed that there was no standard way to estimate statewide economic impacts from new supply- and demand-side electricity options. Second, decision-makers who were interviewed stated that they were overwhelmed with data in general, but also lacked enough specific information about economic development impacts to their states from electricity, to make informed choices. This dissertation includes chapters on electricity decision-making and on economic impacts from supply and demand. The supply chapter compares different electricity options in three states which vary in natural resource content: Arizona, Colorado and Michigan. To account for differing capacity factors, resources are compared on a per-megawatt-hour basis. The calculations of economic impacts from new supply include: materials and labor for construction, operations, maintenance, fuel extraction, fuel transport, as well as property tax, financing and landowner revenues. The demand-side chapter compares residential, commercial and industrial programs in Iowa. Impact calculations include: incremental labor and materials for program planning, installation and operations, as well as sales taxes and electricity saved. Results from supply-side calculations in the three states analyzed indicate that adding new wind power can have a greater impact to a state's economy than adding new gas or coal power due to resource location, taxes and infrastructure. Additionally, demand-side management programs have a higher relative percentage of in-state dollar flow than supply-side solutions, though demand-side programs typically involve fewer MWh and dollars than supply-side generation. Methods for this dissertation include researching

Using Demand Side Management to Adapt to Water Scarcity and ...

International Development Research Centre (IDRC) Digital Library (Canada)

The Saiss is a sub-basin of the Sebou basin in Northern Morocco. Due to decreased precipitation and increased water demand, the surface waters of the Saiss basin have been greatly reduced. At the current rate of exploitation, the aquifer will be depleted within 25 years. This project will examine whether demand-side ...

A future Demand Side Management (DSM) opportunity for utility as variable renewable penetrate scale up using agriculture.

Science.gov (United States)

Ines, A.; Bhattacharjee, A.; Modi, V.; Robertson, A. W.; Lall, U.; Kocaman Ayse, S.; Chaudhary, S.; Kumar, A.; Ganapathy, A.; Kumar, A.; Mishra, V.

2015-12-01

Energy demand management, also known as demand side management (DSM), is the modification of consumer demand for energy through various methods such as smart metering, incentive based schemes, payments for turning off loads or rescheduling loads. Usually, the goal of demand side management is to encourage the consumer to use less power during periods of peak demand, or to move the time of energy use to off-peak times. Peak demand management does not necessarily decrease total energy consumption, but could be expected to reduce the need for investments in networks and/or power plants for meeting peak demands. Electricity use can vary dramatically on short and medium time frames, and the pricing system may not reflect the instantaneous cost as additional higher-cost that are brought on-line. In addition, the capacity or willingness of electricity consumers to adjust to prices by altering elasticity of demand may be low, particularly over short time frames. In the scenario of Indian grid setup, the retail customers do not follow real-time pricing and it is difficult to incentivize the utility companies for continuing the peak demand supply. A question for the future is how deeper penetration of renewable will be handled? This is a challenging problem since one has to deal with high variability, while managing loss of load probabilities. In the case of managing the peak demand using agriculture, in the future as smart metering matures with automatic turn on/off for a pump, it will become possible to provide an ensured amount of water or energy to the farmer while keeping the grid energized for 24 hours. Supply scenarios will include the possibility of much larger penetration of solar and wind into the grid. While, in absolute terms these sources are small contributors, their role will inevitably grow but DSM using agriculture could help reduce the capital cost. The other option is of advancing or delaying pump operating cycle even by several hours, will still ensure

Barriers and Opportunities to Broader Adoption of Integrated Demand Side Management at Electric Utilities: A Scoping Study

Energy Technology Data Exchange (ETDEWEB)

Potter, Jennifer [Hawaii Natural Energy Institute, Honolulu, HI (United States); Stuart, Elizabeth [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Energy Analysis and Environmental Impacts Div.; Cappers, P [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Energy Analysis and Environmental Impacts Div.

2018-02-13

Integrated demand-side management (IDSM) is a strategic approach to designing and delivering a portfolio of demand side management (DSM) programs to customers. IDSM typically delivers customer centric strategies with the goal of increasing the amount of DSM in the field, but doing so in a way that integrates various measures and technologies to improve their collective performance and/or penetration. Specifically, IDSM can be defined as the integrated or coordinated delivery of three or more of: (1) energy efficiency (EE), (2) demand response (DR), (3) distributed generation (DG), (4) storage, (5) electric vehicle (EV) technologies, and (6) time-based rate programs to residential and commercial electric utility customers. The electric industry’s limited experience deploying IDSM to date suggests that significant barriers may exist. A Berkeley Lab report “Barriers and Opportunities to Broader Adoption of Integrated Demand Side Management at Electric Utilities: A Scoping Study” explores recent electric utility experience with IDSM to provide an assessment of the barriers and potential benefits perceived or experienced by program administrators in their attempts to implement integrated programs. The research draws on surveys and interviews with eleven staff from a sample of eight DSM program administrators and program implementers who were currently implementing or had previously attempted to implement an IDSM program or initiative. Respondents provided their perspectives on drivers for IDSM and barriers to broader deployment. They also reported on actions they had undertaken to promote expanded delivery of IDSM and provided their assessments of the most important under-tapped opportunities for expanding IDSM efforts, both for program administrator and regulatory organizations.

DSM [demand-side management] financing: Risks and incentives

International Nuclear Information System (INIS)

Dayton, D.S.

1992-01-01

Opportunities to make investments in demand side management (DSM) are widespread, especially among large, complex, energy-intensive customers. Acceptable economics are found for energy efficiency improvements, new construction or renovation, replacement of failing or obsolete equipment, and retrofit of existing facilities with more efficient equipment and operations. Market imperfections and technical limitations intrude on the DSM investment process. These intrusions are examined from a financial viewpoint by considering the return on investment and risks faced by the three potential investors in DSM opportunities: the customer, the utility, and the third party contractor or financier. These risks are illustrated by examining the cash flow of a typical project depicting a comprehensive energy efficiency installation in a medium to large industrial or institutional facility. The spread between the customer's risk/return ratio and that of the other two investors is shown to be surprisingly large. A utility role in marketing and financing, as opposed to direct subsidizing of customers or direct purchase of DSM resources from third parties, is explored as an efficient response to these realities. 2 figs., 3 tabs

Impact on energy requirements and emissions of heat pumps and micro-cogenerators participating in demand side management

International Nuclear Information System (INIS)

Cooper, Samuel J.G.; Hammond, Geoffrey P.; McManus, Marcelle C.; Rogers, John G.

2014-01-01

The potential impacts of participating in demand side management (DSM) on the performance of air source heat pumps (ASHP) and micro-combined heat and power (mCHP) units are considered by this study. As significant consumers and generators of electricity at the distribution level, large numbers of heat pumps and micro-cogenerators would provide considerable scope for participation in DSM systems. However, it is possible that operating regimes which are optimised for grid considerations will not achieve the maximum performance that is possible from the units. Modelling has been conducted to investigate the significance of this effect, considering the case where local distribution constraints are the main driver for demand side interventions. A model of domestic electrical demand has been adapted to consider a neighbourhood of 128 dwellings in order to identify when interventions are necessary. This has been combined with dynamic models of two combustion engine micro-cogenerators, a solid oxide fuel cell micro-cogenerator and two ASHPs. A simple thermal model of each building is combined with a range of user preferences in order to determine the preferred operating profiles of the heating units. The DSM scheme analysed here is likely to have minimal impact on the emissions and energy requirements associated with each heating unit. Its effect is similar to that which occurs without DSM if the control system gain is relaxed such that equivalent thermal comfort is achieved. DSM can reduce the peak electrical demand of the neighbourhood. However, in the scenarios investigated, it is unlikely that the peaks can be reduced sufficiently such that they do not exceed the capacity of the local distribution transformer if ASHPs are used in all dwellings. By using a combination of mCHP units with ASHPs, it is possible to supply heating to all dwellings without exceeding this capacity. In this case, the use of DSM can increase the ratio of ASHPs used. In the context of a low

A Midwest utility's perspective of DSM [demand-side management]: Balancing the needs of customers, shareholders and the environment

International Nuclear Information System (INIS)

Collins, G.F.

1990-01-01

PSI Energy, a predominately coal-burning Indiana electric utility, is very concerned about the environment and is using demand-side management (DSM) as part of a strategy to balance the sometimes conflicting interests of the environment, the economy, customers and shareholders. Faced with slow growth within its service territory, an abundance of low-cost, high sulfur coal burning baseload capacity, massive future expenditures for acid rain mitigation and a weakened financial state due to a cancelled nuclear project, PSI Energy has taken a novel approach to preserving value for customers, shareholders, the economy and environment. To accomodate Indiana's goal of least cost utility planning, PSI initiated an all-source bidding program in which it solicited bids for peaking capacity or the equivalent. Four parallel but separate solicitations were pursued: combustion turbine manufacturers for PSI owned and operated capacity, other utilities and non-utility generators for purchased power and third parties for demand-side management. PSI's philosophy with respect to bidding can be expressed as: simplicity, flexibility, creativity, partnerships, expeditious and fairness. There is a minimum bid of 5 MW of summer peak demand reduction, and the minimum contract length is 10 years. The entire 550 MW capacity block available to be filled in the program is open to demand-side resources. The ten major evaluation criteria involved in the program are: price, sponsor qualifications, operational impact, marketing plan, technology, financing plan, verification and measurement, form of security, project management plan, and project cost estimates

Active farmsteads are year-round strongholds for farmland birds

Czech Academy of Sciences Publication Activity Database

Šálek, Martin; Bažant, M.; Żmihorski, M.

(2018) ISSN 0021-8901 Institutional support: RVO:68081766 Keywords : biodiversity * birds * conservation * farmland * farmsteads * hotspots * landscape structure * red-listed species * species richness Subject RIV: EG - Zoology Impact factor: 5.301, year: 2016

Managing Sustainable Demand-side Infrastructure for Power System Ancillary Services

Science.gov (United States)

Parkinson, Simon Christopher

Widespread access to renewable electricity is seen as a viable method to mitigate carbon emissions, although problematic are the issues associated with the integration of the generation systems within current power system configurations. Wind power plants are the primary large-scale renewable generation technology applied globally, but display considerable short-term supply variability that is difficult to predict. Power systems are currently not designed to operate under these conditions, and results in the need to increase operating reserve in order to guarantee stability. Often, operating conventional generation as reserve is both technically and economically inefficient, which can overshadow positive benefits associated with renewable energy exploitation. The purpose of this thesis is to introduce and assess an alternative method of enhancing power system operations through the control of electric loads. In particular, this thesis focuses on managing highly-distributed sustainable demand-side infrastructure, in the form of heat pumps, electric vehicles, and electrolyzers, as dispatchable short-term energy balancing resources. The main contribution of the thesis is an optimal control strategy capable of simultaneously balancing grid- and demand-side objectives. The viability of the load control strategy is assessed through model-based simulations that explicitly track end-use functionality of responsive devices within a power systems analysis typically implemented to observe the effects of integrated wind energy systems. Results indicate that there is great potential for the proposed method to displace the need for increased reserve capacity in systems considering a high penetration of wind energy, thereby allowing conventional generation to operate more efficiently and avoid the need for possible capacity expansions.

Impacts of Demand-Side Management on Electrical Power Systems: A Review

Directory of Open Access Journals (Sweden)

Hussein Jumma Jabir

2018-04-01

Full Text Available Electricity demand has grown over the past few years and will continue to grow in the future. The increase in electricity demand is mainly due to industrialization and the shift from a conventional to a smart-grid paradigm. The number of microgrids, renewable energy sources, plug-in electric vehicles and energy storage systems have also risen in recent years. As a result, future electricity grids have to be revamped and adapt to increasing load levels. Thus, new complications associated with future electrical power systems and technologies must be considered. Demand-side management (DSM programs offer promising solutions to these issues and can considerably improve the reliability and financial performances of electrical power systems. This paper presents a review of various initiatives, techniques, impacts and recent developments of the DSM of electrical power systems. The potential benefits derived by implementing DSM in electrical power networks are presented. An extensive literature survey on the impacts of DSM on the reliability of electrical power systems is also provided for the first time. The research gaps within the broad field of DSM are also identified to provide directions for future work.

Cost benefit analysis of the demand side management programs; Analise de custos e beneficios economicos de programas de gerencia pelo lado da demanda

Energy Technology Data Exchange (ETDEWEB)

Schechtman, R; Baum, M [PROMON Engenharia SA, Rio de Janeiro, RJ (Brazil)

1990-12-31

The several cost and benefit components of the demand side management programs for the society groups, including the concessionaire, consumers and society as a whole are studied. The rule evaluations of management programs by demand side, used by North American concessionaire are also discussed. Finally, the numerical examples, that consolidating the concepts and rules evaluation are presented. (C.G.C.). 5 refs, 1 fig, 3 tabs.

Principles concerning the progress of the gas demand side management in Romania

International Nuclear Information System (INIS)

Leca, A.; Statie, E.; Nistoran, D.

1996-01-01

The consequences of the application of demand side management (DSM) and integrated resources planning (IRP) notions for natural gas are analysed. Present socio-economic context in Romania - from a geopolitical point of view - obviously highlights a set of difficult gas supply problems in our country related to: the impossibility of satisfying the consumption demand from internal resources; the necessity of ensuring by imports of an important quantity of gas, which entails an important foreign currency expenditure and possible political pressures which an unique supplier could exert; the requirement of alignment to the western European country legislation, at an institutional and economical practice level. Each of these problems related to the gas-based power production and all together impose the tackling of DSM and IRP requirements from a strategic point of view. Some conclusions and proposals are presented. (author) 1 fig., 4 refs

The Wisconsin experience with incentives for demand-side management

International Nuclear Information System (INIS)

Landgren, D.A.

1990-01-01

It has been noted that, within traditional regulatory frameworks for electric utilities, factors exist which discourage demand side management (DSM) and that there is a lack of positive incentives for DSM. Regulatory agencies should therefore make it possible for DSM measures to benefit from the same treatment as supply-side measures. The Wisconsin Public Service Commission (WPSC) has recognized this need and has adopted various measures accordingly. The need for efficiency incentives is described according to the particular experience of Wisconsin Electric concerning their recourse to a DSM incentive and according to new incentive models being tested in collaboration with other electricity suppliers in Wisconsin. The WPSC has concluded that the fact of considering the costs relating to DSM as expenses or capitalizing them within the rate base does not motivate the utility to promote DSM programs. The WPSC has thus decided to experiment with energy efficiency incentives in order to evaluate their eventual impact. The choice of the type of incentive had an objective of starting the process in an area where the lack of experience has created, from the regulatory point of view, a reticence on the part of utilities to engage in DSM programs. The WPSC has designed a variety of incentive models which have been adapted to each utility's own situation. Specific incentive programs developed for three Wisconsin utilities are reviewed

Bulk electric system reliability evaluation incorporating wind power and demand side management

Science.gov (United States)

Huang, Dange

correlations and the interactive effects of wind power and load forecast uncertainty on system reliability are examined. The concept of the security cost associated with operating in the marginal state in the well-being framework is incorporated in the economic analyses associated with system expansion planning including wind power and load forecast uncertainty. Overall reliability cost/worth analyses including security cost concepts are applied to select an optimal wind power injection strategy in a bulk electric system. The effects of the various demand side management measures on system reliability are illustrated using the system, load point, and well-being indices, and the reliability index probability distributions. The reliability effects of demand side management procedures in a bulk electric system including wind power and load forecast uncertainty considerations are also investigated. The system reliability effects due to specific demand side management programs are quantified and examined in terms of their reliability benefits.

Economic profitability analysis of demand side management program

International Nuclear Information System (INIS)

Sheen, J.N.

2005-01-01

This study considers both the internal and external costs of the utility in deriving the avoided capacity cost (ACC) and avoided operating cost (AOC) induced in an electric utility caused by the implementation of a demand side management program (DSM). In calculating the ACC, a multiple objective linear programming model is developed. Meanwhile, the AOC is calculated by considering the differences between the total and specific time period energy consumption ratios before and after the implementation of the DSM program. This study also develops an economic analysis method using Net Present Value and Pay Back Year models to assess the economic profitability of implementing a DSM program from a participant's point of view. The design and construction of a partial load leveling eutectic salt Cooling Energy Storage (CES) air conditioning system in a target office building in Kaohsiung, Taiwan, is discussed in order to simulate the cost benefit of the CES system from the perspective of the utility and from that of the participant. The results confirm the effectiveness of the developed models in simulating the economic benefits of implementing a DSM program from the perspectives of both the utility and the participant

Demand-Side Management and European environmental and energy goals. An optimal complementary approach

International Nuclear Information System (INIS)

Bergaentzle, Claire; Clastres, Cedric; Khalfallah, Haikel

2013-12-01

Demand side management (DSM) in electricity markets could improve energy efficiency and achieve environmental targets through controlled consumption. For the past 10 years or so DSM programs have registered significant results. However, detailed analysis of its real impact as observed by a large number of pilot studies suggests that such programs need to be fine-tuned to suit clearly identified conditions. This study aims to provide recommendations for the instruments to be used to prompt demand response with a view to maximizing energy and environmental efficiencies of various countries. The present study suggests that different DSM models should be deployed depending on the specific generation mix in any given country. Beside the natural benefits from cross-borders infrastructures, DSM improves the flexibility and reliability of the energy system, absorbing some shock on generation mix. We show efficiency increases with demand response but at a decreasing rate. So, according to rebound and report effects, simple DSM tools could be preferred. (authors)

Impact of realistic communications for fast-acting demand side management

DEFF Research Database (Denmark)

Dambrauskas, Paulius; Syed, Mazheruddin H.; Blair, Steven M.

2017-01-01

The rising penetration of intermittent energy resources is increasing the need for more diverse electrical energy resources that are able to support ancillary services. Demand side management (DSM) has a significant potential to fulfil this role, but several challenges are still impeding the wide......-scale integration of DSM. One of the major challenges is ensuring the performance of the networks that enable communications between control centres and the end DSM resources. This study presents an analysis of all communications networks that typically participate in the activation of DSM, and provides an estimate...... for the overall latency that these networks incur. The most significant sources of delay from each of the components of the communications network are identified which allows the most critical aspects to be determined. This analysis, therefore, offers a detailed evaluation of the performance of DSM resources...

Primary Control by ON/OFF Demand-Side Devices

DEFF Research Database (Denmark)

Biegel, Benjamin; Hansen, Lars Henrik; Andersen, Palle

2013-01-01

We consider an aggregator managing a portfolio of ON/OFF demand-side devices. The devices are able to shift con- sumption in time within certain energy limitations; moreover, the devices are able to measure the system frequency and switch ON and OFF accordingly. We show how the aggregator can...

Incentive-compatible demand-side management for smart grids based on review strategies

Science.gov (United States)

Xu, Jie; van der Schaar, Mihaela

2015-12-01

Demand-side load management is able to significantly improve the energy efficiency of smart grids. Since the electricity production cost depends on the aggregate energy usage of multiple consumers, an important incentive problem emerges: self-interested consumers want to increase their own utilities by consuming more than the socially optimal amount of energy during peak hours since the increased cost is shared among the entire set of consumers. To incentivize self-interested consumers to take the socially optimal scheduling actions, we design a new class of protocols based on review strategies. These strategies work as follows: first, a review stage takes place in which a statistical test is performed based on the daily prices of the previous billing cycle to determine whether or not the other consumers schedule their electricity loads in a socially optimal way. If the test fails, the consumers trigger a punishment phase in which, for a certain time, they adjust their energy scheduling in such a way that everybody in the consumer set is punished due to an increased price. Using a carefully designed protocol based on such review strategies, consumers then have incentives to take the socially optimal load scheduling to avoid entering this punishment phase. We rigorously characterize the impact of deploying protocols based on review strategies on the system's as well as the users' performance and determine the optimal design (optimal billing cycle, punishment length, etc.) for various smart grid deployment scenarios. Even though this paper considers a simplified smart grid model, our analysis provides important and useful insights for designing incentive-compatible demand-side management schemes based on aggregate energy usage information in a variety of practical scenarios.

Smart grid dispatch strategy for on/off demand-side devices

DEFF Research Database (Denmark)

Biegel, Benjamin; Andersen, Palle; Pedersen, Tom S.

2013-01-01

We consider an aggregator managing a portfolio of runtime and downtime constrained ON/OFF demand-side devices. The devices are able to shift consumption in time within certain energy limitations. We show how the aggregator can manage the portfolio of devices to collectively provide upward...

Demand-side management project for Tenaga Nasional Berhad. Energy efficiency guidelines. Progress report No. 3. Volume 1. Final report. Export trade information

Energy Technology Data Exchange (ETDEWEB)

NONE

1993-05-01

This study, conducted by the California Energy Commission, was funded by the U.S. Trade and Development Agency. The report summarizes a demand-side management study performed for the Tenaga Nasional Berhad Headquarters Building. The purpose of the study was to identify and evaluate demand side management measures (DSMs) that would reduce energy costs of the facility. Volume 1 is divided into the following sections: (1.0) Executive Summary; (2.0) Facility Background; (3.0) Ventilating and Air Conditioning Systems Description; (4.0) Lightning System Description; Figures, Tables, and Appendices.

Impact of energy storage in buildings on electricity demand side management

International Nuclear Information System (INIS)

Qureshi, Waqar A.; Nair, Nirmal-Kumar C.; Farid, Mohammad M.

2011-01-01

Research highlights: → Phase change material (PCM) application for space heating has been implemented and assessed for built environment. → Real-Time Pricing (RTP) is assessed as tool to implement Demand Side Management programs effectively. → Two buildings, with and without PCM, have been compared for space heating using RTP in functional electricity market. → PCM found to offer peak load shifting, energy conservation, and reduction in price of electricity. -- Abstract: This paper assesses impact of using phase change materials (PCM) in buildings to leverage its thermal energy storage capability. The emphasis is from an electricity demand side perspective with case studies that incorporates wholesale electricity market data of New Zealand. The results presented in this paper show that for space heating application significant advantages could be obtained using PCM built structures. These positive impacts include peak load shifting, energy conservation and reduction in peak demand for network line companies and potential reduction in electricity consumption and savings for residential customers. This paper uses a testing facility that consists of two identically designed and shaped offices built at Tamaki Campus location of the University of Auckland, New Zealand. The walls and ceilings of one office are finished with ordinary gypsum boards while the interior of the other office is finished with PCM impregnated gypsum boards. Controlled heating facility is provided in both the offices for maintaining temperature within the range of human comfort. This facility is equipped with advanced data acquisition equipment for data monitoring and archiving both locally within the offices and also remotely. Through actual observations and analysis this paper demonstrates two major impacts of DSM. First, the application of phase change material (PCM) in building environment enabling efficient thermal storage to achieve some reduction in the overall electrical energy

Demand side management for remote area power supply systems incorporating solar irradiance model

International Nuclear Information System (INIS)

Al-Alawi, A.; Islam, S.M.

2004-01-01

This paper presents a technique for generating the daily electricity load profile for remote areas in the Middle East from first principles, using diversified demand. The generated load profile includes the energy required to run a small desalination unit to provide the necessary freshwater. Demand side management (DSM) is used in this study to smooth out the daily peaks and fill valleys in the load curve to make the most efficient use of energy resources. Finally, the load profile is compared with real data for six houses collected from Safri area in the Sultanate of Oman. These data may be used as the basis to obtain load profiles of other remote areas of the Middle East since the weather and social factors are similar. The modified hourly variation factor based on weather and economic and social factors of the Middle East is obtained. (author)

Demand side management program evaluation based on industrial and commercial field data

International Nuclear Information System (INIS)

Eissa, M.M.

2011-01-01

Demand Response is increasingly viewed as an important tool for use by the electric utility industry in meeting the growing demand for electricity. There are two basic categories of demand response options: time varying retail tariffs and incentive Demand Response Programs. is applying the time varying retail tariffs program, which is not suitable according to the studied load curves captured from the industrial and commercial sectors. Different statistical studies on daily load curves for consumers connected to 22 kV lines are classified. The load curve criteria used for classification is based on peak ratio and night ratio. The data considered here is a set of 120 annual load curves corresponding to the electric power consumption (the western area in the King Saudi Arabia (KSA)) of many clients in winter and some months in the summer (peak period). The study is based on real data from several Saudi customer sectors in many geographical areas with larger commercial and industrial customers. The study proved that the suitable Demand Response for the ESC is the incentive program. - Highlights: → Study helps in selecting the proper demand side program. → A credit will be given for the customers during summer months. → Reduction in the electric bill. → Monthly bill credit is decreased based on customers' peak load reduction. → Guide for applying the proper demand side program suitable for the utility and customers.

Demand-side management project for Tenaga Nasional Berhad. Progress report No. 4. Export trade information

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-03-01

This study, conducted by the California Energy Commission, was funded by the U.S. Trade and Development Agency. Progress Report No. 4 is divided into the following contents: April 6, 1994 Training Mission Delegation Itinerary; April 6, 1994 Training Mission Workshop Information Package; Letter to Chairman of Tenaga Nasional Berhad Requesting Demonstration Project Funding; Design/Build Construction Bid Proposal for Energy Efficient Electric Technology Demontration Project; Final Draft of Demand-Side Management Plan for Tenaga Nasional Berhad; Attachments.

An Enhanced System Architecture for Optimized Demand Side Management in Smart Grid

Directory of Open Access Journals (Sweden)

Anzar Mahmood

2016-04-01

Full Text Available Demand Side Management (DSM through optimization of home energy consumption in the smart grid environment is now one of the well-known research areas. Appliance scheduling has been done through many different algorithms to reduce peak load and, consequently, the Peak to Average Ratio (PAR. This paper presents a Comprehensive Home Energy Management Architecture (CHEMA with integration of multiple appliance scheduling options and enhanced load categorization in a smart grid environment. The CHEMA model consists of six layers and has been modeled in Simulink with an embedded MATLAB code. A single Knapsack optimization technique is used for scheduling and four different cases of cost reduction are modeled at the second layer of CHEMA. Fault identification and electricity theft control have also been added in CHEMA. Furthermore, carbon footprint calculations have been incorporated in order to make the users aware of environmental concerns. Simulation results prove the effectiveness of the proposed model.

A Virtual Power Plant Architecture for the Demand-Side Management of Smart Prosumers

Directory of Open Access Journals (Sweden)

Marco Pasetti

2018-03-01

Full Text Available In this paper, we present a conceptual study on a Virtual Power Plant (VPP architecture for the optimal management of Distributed Energy Resources (DERs owned by prosumers participating in Demand-Side Management (DSM programs. Compared to classical VPP architectures, which aim to aggregate several DERs dispersed throughout the electrical grid, in the proposed VPP architecture the supervised physical domain is limited to single users, i.e., to single Points of Delivery (PODs of the distribution network. The VPP architecture is based on a service-oriented approach, where multiple agents cooperate to implement the optimal management of the prosumer’s assets, by also considering different forms of Demand Response (DR requests. The considered DR schemes range from Price-Based DRs to Event-Based DRs, covering both the normal operating functions and the emergency control requests applied in modern distribution networks. With respect to centralized approaches, in this study the control perspective is moved from the system level to the single prosumer’s level, who is allowed to independently provide flexible power profiles through the aggregation of multiple DERs. A generalized optimization model, formulated as a Mixed-Integer Linear Programming (MILP problem, is also introduced. Such a model is able to compute the optimal scheduling of a prosumer’s assets by considering both DR requests and end-users’ requirements in terms of comfort levels while minimizing the costs.

Physiological and skill demands of 'on-side' and 'off-side' games.

Science.gov (United States)

Gabbett, Tim J; Jenkins, David G; Abernethy, Bruce

2010-11-01

This study investigated the physiological and skill demands of 'on-side' and 'off-side' games in elite rugby league players. Sixteen male rugby league players participated in 'on-side' and 'off-side' games. Both small-sided games were played in a 40- × 40-m playing area. The 'off-side' game permitted players to have 3 'plays' while in possession of the ball. Players were permitted to pass backward or forward (to an 'off-side' player). The 'on-side' game also permitted players to have 3 'plays' while in possession of the ball. However, players were only permitted to pass backward to players in an 'on-side' position. Heart rate and movement patterns (via global positioning system) were recorded continuously throughout both games. Data were collected on the distance covered, number of high-acceleration and velocity efforts, and recovery between efforts. Video footage was also taken to track the performance of the players. Post hoc inspection of the footage was undertaken to count the number of possessions and the number and quality of disposals. In comparison to 'on-side' games, 'off-side' games had a greater number of involvements ("touches"), passes, and effective passes. However, the cognitive demands of 'on-side' games were greater than 'off-side' games. 'Off-side' games resulted in a greater total distance covered, greater distance covered in mild and moderate accelerations, and greater distance covered in low, moderate, and high-velocity efforts. There were also a greater number of short duration recovery periods between efforts in 'off-side' games. The results of this study demonstrate that 'off-side' games provide greater physiological and skill demands than 'on-side' games. 'Off-side' games may provide a practical alternative to 'on-side' games for the development of skill and fitness in elite rugby league players.

Field application of farmstead runoff to vegetated filter strips: surface and subsurface water quality assessment.

Science.gov (United States)

Larson, Rebecca A; Safferman, Steven I

2012-01-01

Farmstead runoff poses significant environmental impacts to ground and surface waters. Three vegetated filter strips were assessed for the treatment of dairy farmstead runoff at the soil surface and subsurface at 0.3- or 0. 46-m and 0. 76-m depths for numerous storm events. A medium-sized Michigan dairy was retrofitted with two filter strips on sandy loam soil and a third filter strip was implemented on a small Michigan dairy with sandy soil to collect and treat runoff from feed storage, manure storage, and other impervious farmstead areas. All filter strips were able to eliminate surface runoff via infiltration for all storm events over the duration of the study, eliminating pollutant contributions to surface water. Subsurface effluent was monitored to determine the contributing groundwater concentrations of numerous pollutants including chemical oxygen demand (COD), metals, and nitrates. Subsurface samples have an average reduction of COD concentrations of 20, 11, and 85% for the medium dairy Filter Strip 1 (FS1), medium dairy Filter Strip 2 (FS2), and the small Michigan dairy respectively, resulting in average subsurface concentrations of 355, 3960, and 718 mg L COD. Similar reductions were noted for ammonia and total Kjeldahl nitrogen (TKN) in the subsurface effluent. The small Michigan dairy was able to reduce the pollutant leachate concentrations of COD, TKN, and ammonia over a range of influent concentrations. Increased influent concentrations in the medium Michigan dairy filter strips resulted in an increase in COD, TKN, and ammonia concentrations in the leachate. Manganese was leached from the native soils at all filter strips as evidenced by the increase in manganese concentrations in the leachate. Nitrate concentrations were above standard drinking water limits (10 mg L), averaging subsurface concentrations of 11, 45, and 25 mg L NO-N for FS1, FS2, and the small Michigan dairy, respectively. Copyright © by the American Society of Agronomy, Crop Science

DEMONSTRATION OF THE ENVIRONMENTAL AND DEMAND-SIDE MANAGEMENT BENEFITS OF GRID-CONNECTED PHOTOVOLTAIC POWER SYSTEMS SITED ON MILITARY BASES

Science.gov (United States)

The report gives results of an investigation into the pollutant emission reduction and demand-side management potential of three photovoltaic (PV) systems installed at Ft. Huachuca, AZ, Ft. Dix, NJ, and Hickam Air Force Base, HI, which began operation between January and July 199...

Albedo and vegetation demand-side management options for warm climates

International Nuclear Information System (INIS)

Hall, Darwin C.

1997-01-01

For electric utilities, demand-side management (DSM) can reduce electric load and shift load from peak to off-peak periods. In general, the investor in DSM collects the reward with lower electric bills, excepting a positive externality because of reduced tropospheric and stratospheric air pollution from fossil fuel power plants. In warm climates, DSM options include increasing albedo and vegetation, respectively, by painting surfaces white and planting trees; these DSM options are distinguished from all other DSM options because of ecosystem effects. Ambient temperature falls, mitigating the urban 'heat island', which reduces electric load and ozone formation. The investor in albedo and vegetation DSM options does not collect all of the reward from lower electric bills, since the lower ambient temperature provides savings to all customers who use electricity for air conditioning and refrigeration. Similar to other DSM options, air pollution is also reduced as a result of lower power plant emissions. Complex airshed models and electric utility system dispatch models are applied in this paper to account for some of these ecosystem effects. Unaccounted ecosystem effects remain, stymieing cost effectiveness analysis

Demand side management for commercial buildings using an in line heat pump water heating methodology

International Nuclear Information System (INIS)

Rankin, Riaan; Rousseau, Pieter G.; Eldik, Martin van

2004-01-01

Most of the sanitary hot water used in South African buildings is heated by means of direct electrical resistance heaters. This is one of the major contributors to the undesirably high morning and afternoon peaks imposed on the national electricity supply grid. For this reason, water heating continues to be of concern to the electricity supplier, ESCOM. Previous studies, conducted by the Potchefstroom University for Christian Higher Education in South Africa, indicated that extensive application of the so called inline heat pump water heating methodology in commercial buildings could result in significant demand side management savings to ESKOM. Furthermore, impressive paybacks can be obtained by building owners who choose to implement the design methodology on existing or new systems. Currently, a few examples exist where the design methodology has been successfully implemented. These installations are monitored with a fully web centric monitoring system that allows 24 h access to data from each installation. Based on these preliminary results, a total peak demand reduction of 108 MW can be achieved, which represents 18% of the peak load reduction target set by ESKOM until the year 2015. This represents an avoided cost of approximately MR324 (ZAR) [Int J Energy Res 25(4) (1999) 2000]. Results based on actual data from the monitored installations shows a significant peak demand reduction for each installation. In one installation, a hotel with an occupancy of 220 people, the peak demand contribution of the hot water installation was reduced by 86%, realizing a 36% reduction in peak demand for the whole building. The savings incurred by the building owner also included significant energy consumption savings due to the superior energy efficiency of the heat pump water heater. The combined savings result in a conservatively calculated straight payback period of 12.5 months, with an internal rate of return of 98%. The actual cost of water heating is studied by

Towards demand-side solutions for mitigating climate change

Science.gov (United States)

Creutzig, Felix; Roy, Joyashree; Lamb, William F.; Azevedo, Inês M. L.; Bruine de Bruin, Wändi; Dalkmann, Holger; Edelenbosch, Oreane Y.; Geels, Frank W.; Grubler, Arnulf; Hepburn, Cameron; Hertwich, Edgar G.; Khosla, Radhika; Mattauch, Linus; Minx, Jan C.; Ramakrishnan, Anjali; Rao, Narasimha D.; Steinberger, Julia K.; Tavoni, Massimo; Ürge-Vorsatz, Diana; Weber, Elke U.

2018-04-01

Research on climate change mitigation tends to focus on supply-side technology solutions. A better understanding of demand-side solutions is missing. We propose a transdisciplinary approach to identify demand-side climate solutions, investigate their mitigation potential, detail policy measures and assess their implications for well-being.

Communications technologies for demand side management, DSM, and European utility communications architecture, EurUCA

Energy Technology Data Exchange (ETDEWEB)

Uuspaeae, P. [VTT Energy, Espoo (Finland)

1996-12-31

The scope of this research is data communications for electric utilities. Demand Side Management (DSM) calls for communication between the Electric Utility and the Customer. The communication capacity needed will depend on the functions that are chosen for DSM, and on the number of customers. Some functions may be handled with one-way communications, some functions require two-way communication. Utility Communication Architecture looks for an overall view of the communications needs and communication systems in an electric utility. The objective is to define and specify suitable and compatible communications procedures within the Utility and also to outside parties. (27 refs.)

Communications technologies for demand side management, DSM, and European utility communications architecture, EurUCA

Energy Technology Data Exchange (ETDEWEB)

Uuspaeae, P [VTT Energy, Espoo (Finland)

1997-12-31

The scope of this research is data communications for electric utilities. Demand Side Management (DSM) calls for communication between the Electric Utility and the Customer. The communication capacity needed will depend on the functions that are chosen for DSM, and on the number of customers. Some functions may be handled with one-way communications, some functions require two-way communication. Utility Communication Architecture looks for an overall view of the communications needs and communication systems in an electric utility. The objective is to define and specify suitable and compatible communications procedures within the Utility and also to outside parties. (27 refs.)

Comparing Demand Side Management approaches

NARCIS (Netherlands)

Molderink, Albert; Bakker, Vincent; Hurink, Johann L.; Smit, Gerardus Johannes Maria

2012-01-01

Due to increasing energy prices and the greenhouse effect, a more efficient energy supply is desirable, preferably based on renewable sources. To cope with the decrease of flexibility due to the introduction of renewables in production side of the supply chain, a more flexible consumer side is

Effects of utility demand-side management programs on uncertainty

International Nuclear Information System (INIS)

Hirst, E.

1994-01-01

Electric utilities face a variety of uncertainties that complicate their long-term resource planning. These uncertainties include future economic and load growths, fuel prices, environmental and economic regulations, performance of existing power plants, cost and availability of purchased power, and the costs and performance of new demand and supply resources. As utilities increasingly turn to demand-side management (DSM) programs to provide resources, it becomes more important to analyze the interactions between these programs and the uncertainties facing utilities. This paper uses a dynamic planning model to quantify the uncertainty effects of supply-only vs DSM + supply resource portfolios. The analysis considers four sets of uncertainties: economic growth, fuel prices, the costs to build new power plants, and the costs to operate DSM programs. The two types of portfolios are tested against these four sets of uncertainties for the period 1990 to 2010. Sensitivity, scenario, and worst-case analysis methods are used. The sensitivity analyses show that the DSM + supply resource portfolio is less sensitive to unanticipated changes in economic growth, fuel prices, and power-plant construction costs than is the supply-only portfolio. The supply-only resource mix is better only with respect to uncertainties about the costs of DSM programs. The base-case analysis shows that including DSM programs in the utility's resource portfolio reduces the net present value of revenue requirements (NPV-RR) by 490 million dollars. The scenario-analysis results show an additional 30 million dollars (6%) in benefits associated with reduction in these uncertainties. In the worst-case analysis, the DSM + supply portfolio again reduces the cost penalty associated with guessing wrong for both cases, when the utility plans for high needs and learns it has low needs and vice versa. 20 refs

Developing a demand side management strategic framework through a collaborative [process

International Nuclear Information System (INIS)

Kostler, J.

1992-01-01

Alberta Power Ltd. is developing a demand side management (DSM) strategic framework through a collaborative process that began in September 1991. The process is seen to have the advantages of involving customers in DSM issues, giving them the opportunity to determine the outcome, being less confrontational, and having the capability of arriving at solutions unattainable through other processes. Issues being considered in the collaborative process include cost effectiveness, externalities, screening and analyzing of DSM measures, cost allocation and recovery, DSM lost revenues, the utility role in DSM, measurement criteria, and incentives. The process includes day-long meetings of a 12-member collaborative group comprising representatives from Alberta Power, government agencies, industry and municipal associations, and environmental and consumer organizations. A professional facilitator and an expert consultant from outside Alberta Power were employed to support the collaborative process. The process is working well and is on track to present the utility with a strategic framework to deal with DSM

Why strategic pricing is the most powerful DSM [demand-side management] tool

International Nuclear Information System (INIS)

LeBlanc, W.

1990-01-01

Strategic pricing has long been under-utilized as a strategic tool by the electric utility industry. Ways by which utility, customer and regulatory interests can and should overlap with reference to strategic planning, and how the electric industry could enhance its ability to continue providing premier energy services to its customers and society are examined. Strategic pricing in the airline, banking, automobile and telephone industries are examined and compared. Strategic pricing can help utilities segment markets to improve service value, define products, create customer incentives to purchase/consume desirable goods and services, and signal competitors. Each of these benefits is illustrated with an example that closely integrates strategic pricing with demand-side management. Pricing strategically takes many steps, but can be broken down into: meet common challenges of business and marketing objectives; gain regulatory acceptance; and energize the organization to accept, adopt and implement strategic pricing

An Overview of Demand Side Management Control Schemes for Buildings in Smart Grids

DEFF Research Database (Denmark)

Kosek, Anna Magdalena; Costanzo, Giuseppe Tommaso; Bindner, Henrik W.

2013-01-01

The increasing share of distributed energy resources and renewable energy in power systems results in a highly variable and less controllable energy production. Therefore, in order to ensure stability and to reduce the infrastructure and operation cost of the power grid, flexible and controllable...... of the power sector in mind and thus can differ significantly in their architecture, their integration into the various markets, their integration into distribution network operation and several other aspects. This paper proposes a classification of load control policies for demand side management in smart...... buildings, based on external behavior: direct, indirect, transactional and autonomous control; internal operation: decision support system scope, control strategy, failure handling and architecture. This classification assists in providing an overview of the control schemes as well as different ways...

Demand-side management (DSM) in the context of China's on-going power sector reform

International Nuclear Information System (INIS)

Zhang, Sufang; Jiao, Yiqian; Chen, Wenjun

2017-01-01

As an approach to manage power demand-side resources, DSM plays an important role in electric power system. Though DSM was introduced into China in the early 1990s, its benefits have been underutilized. Using literature study, interview methods and three data sources, this paper examines the likely impacts of China's on-going power sector reform on its DSM. It finds that the major constraints to DSM in China are the insufficient and improper market-based DSM mechanism, grid companies’ low motivations for DSM due to their traditional business model, the underdeveloped energy service industry, and electricity end-users’ low motivation for DSM. China's on-going power sector reform will change power transmission and distribution pricing and grid companies’ business model and introduce competition into retail-side. Drawing on these findings, it is concluded that the likely impacts of the new reform on DSM are: governments may attach more importance to DSM; grid companies may have more motivations for DSM investment; electricity end-users’ motivations for DSM may be both enhanced and dampened; electricity retailers’ motivations for DSM may be dampened; demand response application may be enhanced, and more DSM business models may be developed. Finally, policy implications are provided. - Highlights: • Mechanism of and constraints to DSM in China are examined. • China’s on-going power sector reform is overviewed. • DSM is likely to be enhanced under China's on-going power sector reform. • Policy implications are provided.

Proceedings of the CEATI demand side management workshop on understanding customer response. CD-ROM ed.

International Nuclear Information System (INIS)

2006-01-01

Demand for electricity continues to increase in the midst of environmental concerns, deregulation and the rapid evolution of technology. In order to succeed in a changing environment, utilities must be both adaptive and innovative. Growing concerns over supply and the environmental effects of rising consumption rates have led many utilities to establish demand side management (DSM) programs. However, some utilities have failed to consider the importance of customer behaviour in the success of DSM programs. This conference examined various successful initiatives to encourage customers to reduce their individual or corporate demands for energy. The influence of branding, technology, information prices signals and various other strategies were explored. Issues concerning energy efficiency and customer feedback were discussed. The effect of alternative pricing regimes on DSM programs was investigated. Various information system tools were also examined, and the value of real time electricity monitoring was evaluated. Various DSM initiatives in North America were used to establish benchmarks for the successful implementation of DSM strategies. The conference was divided into 3 sessions: (1) involving the customer in reducing demand; (2) the success of energy efficiency and demand response programs : the impact of branding and the impact of price signals; and (3) the technologies and innovations needed to make it work. The conference featured 13 presentations, of which 8 have been catalogued separately for inclusion in this database. refs., tabs., figs

Proceedings of the CEATI demand side management workshop on understanding customer response. CD-ROM ed.

Energy Technology Data Exchange (ETDEWEB)

NONE

2006-07-01

Demand for electricity continues to increase in the midst of environmental concerns, deregulation and the rapid evolution of technology. In order to succeed in a changing environment, utilities must be both adaptive and innovative. Growing concerns over supply and the environmental effects of rising consumption rates have led many utilities to establish demand side management (DSM) programs. However, some utilities have failed to consider the importance of customer behaviour in the success of DSM programs. This conference examined various successful initiatives to encourage customers to reduce their individual or corporate demands for energy. The influence of branding, technology, information prices signals and various other strategies were explored. Issues concerning energy efficiency and customer feedback were discussed. The effect of alternative pricing regimes on DSM programs was investigated. Various information system tools were also examined, and the value of real time electricity monitoring was evaluated. Various DSM initiatives in North America were used to establish benchmarks for the successful implementation of DSM strategies. The conference was divided into 3 sessions: (1) involving the customer in reducing demand; (2) the success of energy efficiency and demand response programs : the impact of branding and the impact of price signals; and (3) the technologies and innovations needed to make it work. The conference featured 13 presentations, of which 8 have been catalogued separately for inclusion in this database. refs., tabs., figs.

Hawaii demand-side management resource assessment. Final report, Reference Volume 1: Building prototype analysis

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-04-01

This report provides a detailed description of, and the baseline assumptions and simulation results for, the building prototype simulations conducted for the building types designated in the Work Plan for Demand-side Management Assessment of Hawaii`s Demand-Side Resources (HES-4, Phase 2). This report represents the second revision to the initial building prototype description report provided to DBEDT early in the project. Modifications and revisions to the prototypes, based on further calibration efforts and on comments received from DBEDT Staff have been incorporated into this final version. These baseline prototypes form the basis upon which the DSM measure impact estimates and the DSM measure data base were developed for this project. This report presents detailed information for each of the 17 different building prototypes developed for use with the DOE-21E program (23 buildings in total, including resorts and hotels defined separately for each island) to estimate the impact of the building technologies and measures included in this project. The remainder of this section presents some nomenclature and terminology utilized in the reports, tables, and data bases developed from this project to denote building type and vintage. Section 2 contains a more detailed discussion of the data sources, the definition of the residential sector building prototypes, and results of the DOE-2 analysis. Section 3 provides a similar discussion for the commercial sector. The prototype and baseline simulation results are presented in a separate section for each building type. Where possible, comparison of the baseline simulation results with benchmark data from the ENERGY 2020 model or other demand forecasting models specific to Hawaii is included for each building. Appendix A contains a detailed listing of the commercial sector baseline indoor lighting technologies included in the existing and new prototypes by building type.

Province gets serious about demand management

International Nuclear Information System (INIS)

Anon

2003-01-01

Directives from the Minister to the Ontario Energy Board to review options for demand-side management and demand reduction activities, and discussion papers describing the policy framework needed to implement demand management, are indications of renewed interest by the provincial government in demand-side management of Ontario's electric power supply. This renewed interest comes on the hills of a 5.5 per cent increase in electricity use, a 33 per cent increase in imports, and consumption records broken in 10 of the last 12 months. A 117-page study was released in April by Navigant Consulting, entitled 'Demand response blueprint for Ontario' which estimates that if the Ontario market had 250 MW of additional demand response, customers providing the demand response would have saved $20 million by reducing their demand when HOEP was greater than $120/MWh, while other customers would have saved $170 million due to lower HOEP, and would have enjoyed greater reliability as a result of the increase in reserve margins. Other than price signals to induce customers to save, the Navigant report suggest paying customers not to consume during peak periods. The report estimates that such a policy could generate a total demand response of 350 MW and a $235 million reduction in revenue to generators. The Navigan report also includes a large number of detailed analysis and recommendations. One among them is for the extensive use of interval meters for customers with loads over 200 kW. The report tends to be critical of the recent price freeze ordered by the Ontario government, claiming that the freeze could increase consumption, making prices more volatile and increasing the cost to the government even more. Successful demand response programs from California, New York and the New England states are cited as examples for Ontario to emulate

Electricity deregulation, spot price patterns and demand-side management

International Nuclear Information System (INIS)

Li, Y.; Flynn, P.C.

2006-01-01

This paper examines extensive hourly or half-hourly power price data from 14 deregulated power markets. It analyzes average diurnal patterns, relationship to system load, volatility, and consistency over time. Diurnal patterns indicate the average price spread between off-peak and on-peak and weekend vs. weekday power consumption. Volatility is measured by price velocity: the average normalized hourly change in power price, calculated daily. The calculated price velocity is broken down into an expected component that arises from the diurnal pattern and an unexpected component that arises from unknown factors. The analysis reveals significant differences among markets, suggesting that demand-side management (DSM) of power consumption is far more difficult in some markets than in others. At one extreme, Spain, Britain and Scandinavia show consistent diurnal price patterns, a stable relationship between price and system load, and a low unexplained component of price volatility. A power consumer in these markets could form a reasonable expectation of a reward for DSM of elective power consumption. At the other extreme, two markets in Australia show erratic diurnal price patterns from year to year, low correlation between price and system load, and a high amount of unexpected price velocity. A power consumer in these markets would have far greater difficulty in realizing a benefit from DSM. Markets that experienced one period of very high prices without a clear external cause, such as California and Alberta, appear to have a significant longer-term erosion of public support for deregulation. (author)

Demand-side management project for Tenaga Nasional Berhad. Progress report No. 3. Volume 2. Export trade information

Energy Technology Data Exchange (ETDEWEB)

NONE

1993-09-01

The objective of this work is identify and encompass those utility demand-side management (DSM) activities that influence customer electricity use to produce customer savings while favorably modifying the utility load. These activities can help utilities operate more efficiently and effectively in uncertain and competitive business environments. This work authorization will initiate the following: Provide descriptive information on the operating characteristics, applicability, specifications, costs, and benefits of DSM/end-use technologies; Characterize the marketing methods used to encourage customer acceptance of these technologies.

An Improved Fuzzy C-Means Algorithm for the Implementation of Demand Side Management Measures

Directory of Open Access Journals (Sweden)

Ioannis Panapakidis

2017-09-01

Full Text Available Load profiling refers to a procedure that leads to the formulation of daily load curves and consumer classes regarding the similarity of the curve shapes. This procedure incorporates a set of unsupervised machine learning algorithms. While many crisp clustering algorithms have been proposed for grouping load curves into clusters, only one soft clustering algorithm is utilized for the aforementioned purpose, namely the Fuzzy C-Means (FCM algorithm. Since the benefits of soft clustering are demonstrated in a variety of applications, the potential of introducing a novel modification of the FCM in the electricity consumer clustering process is examined. Additionally, this paper proposes a novel Demand Side Management (DSM strategy for load management of consumers that are eligible for the implementation of Real-Time Pricing (RTP schemes. The DSM strategy is formulated as a constrained optimization problem that can be easily solved and therefore, making it a useful tool for retailers’ decision-making framework in competitive electricity markets.

Distributed demand-side management optimisation for multi-residential users with energy production and storage strategies

Directory of Open Access Journals (Sweden)

Emmanuel Chifuel Manasseh

2014-12-01

Full Text Available This study considers load control in a multi-residential setup where energy scheduler (ES devices installed in smart meters are employed for demand-side management (DSM. Several residential end-users share the same energy source and each residential user has non-adjustable loads and adjustable loads. In addition, residential users may have storage devices and renewable energy sources such as wind turbines or solar as well as dispatchable generators. The ES devices exchange information automatically by executing an iterative distributed algorithm to locate the optimal energy schedule for each end-user. This will reduce the total energy cost and the peak-to-average ratio (PAR in energy demand in the electric power distribution. Users possessing storage devices and dispatchable generators strategically utilise their resources to minimise the total energy cost together with the PAR. Simulation results are provided to evaluate the performance of the proposed game theoretic-based distributed DSM technique.

Analysis of Cool Roof Coatings for Residential Demand Side Management in Tropical Australia

Directory of Open Access Journals (Sweden)

Wendy Miller

2015-06-01

Full Text Available Cool roof coatings have a beneficial impact on reducing the heat load of a range of building types, resulting in reduced cooling energy loads. This study seeks to understand the extent to which cool roof coatings could be used as a residential demand side management (DSM strategy for retrofitting existing housing in a constrained network area in tropical Australia where peak electrical demand is heavily influenced by residential cooling loads. In particular this study seeks to determine whether simulation software used for building regulation purposes can provide networks with the ‘impact certainty’ required by their DSM principles. The building simulation method is supported by a field experiment. Both numerical and experimental data confirm reductions in total consumption (kWh and energy demand (kW. The nature of the regulated simulation software, combined with the diverse nature of residential buildings and their patterns of occupancy, however, mean that simulated results cannot be extrapolated to quantify benefits to a broader distribution network. The study suggests that building data gained from regulatory simulations could be a useful guide for potential impacts of widespread application of cool roof coatings in this region. The practical realization of these positive impacts, however, would require changes to the current business model for the evaluation of DSM strategies. The study provides seven key recommendations that encourage distribution networks to think beyond their infrastructure boundaries, recognising that the broader energy system also includes buildings, appliances and people.

Design of demand side response model in energy internet demonstration park

Science.gov (United States)

Zhang, Q.; Liu, D. N.

2017-08-01

The implementation of demand side response can bring a lot of benefits to the power system, users and society, but there are still many problems in the actual operation. Firstly, this paper analyses the current situation and problems of demand side response. On this basis, this paper analyses the advantages of implementing demand side response in the energy Internet demonstration park. Finally, the paper designs three kinds of feasible demand side response modes in the energy Internet demonstration park.

Demand Side Management in an Integrated Electricity Market: What are the Impacts on Generation and Environmental Concerns?

International Nuclear Information System (INIS)

Bergaentzle, Claire; Clastres, Cedric

2013-05-01

Smart Grid technology appears necessary to succeed in activating the demand through demand side management (DSM) programs. This would in turn improve energy efficiency and achieve environmental targets through controlled consumption. The many pilot projects led worldwide involving smart grids technology, brought quantitative evaluations of DSM measures on electricity load. Efficient DSM instruments must be fine-tuned to respond to very specific issues arising from the generation mix, the integration of intermittent energies or the level of outage risks faced during peak period. Efficient DSM strategies are illustrated through a model involving five countries that carry these different features and under the assumptions of isolated and fully interconnected markets. This paper aims at bringing recommendations regarding the instruments that should be implemented to maximize the benefits of smart grids technology and demand response. Finally, it tends to emphasis the issue of homogenized energy efficiency policies, critical in the building of internal energy markets such as the one the European Union is envisioning. (authors)

Why commercial customers are SIC of DSM [demand-side management] marketing

International Nuclear Information System (INIS)

Lewis, L.E.

1990-01-01

Studies have shown that the success of demand management programs, which have demonstrated economic benefits, depends on the level of customer participation. In order to have a better understanding of the decisionmaking process of commercial customers with respect to demand management programs, a study was undertaken to determine the preferences and the behavior of this class of clientele. This clientele, whose power consumption has been increasing at a faster rate than that of other sectors, represents a vast range of enterprises producing and supplying all kinds of products. Many of them operate from numerous geographic points on local, regional, national, and even world scales and are generally hierarchically organized. Because of these characteristics, their decisionmaking processes and their needs are equally complex, more so than in the residential sector. A multidimensional approach has been adopted to ensure that their needs are determined according to a quantitative and qualitative research method. The conclusions of the quantitative research have demonstrated that the frameworks representing different organizations respond differently to questions on their needs. It is also noted that certain commercial enterprises are of a cohesive nature (i.e. there is a consistency in understanding of corporate strategic and operational requirements at all hierarchical levels), while others are more diffuse. Those responsible for marketing demand management programs therefore must improve their understanding of the strategic and operational needs of their commercial customers in order to make their demand management programs productive in the view of the appropriate personnel at the hierarchical level applicable to the company concerned

Power System Transient Stability Improvement Using Demand Side Management in Competitive Electricity Markets

DEFF Research Database (Denmark)

Hu, Weihao; Wang, Chunqi; Chen, Zhe

2012-01-01

Since the hourly spot market price is available one day ahead in Denmark, the price could be transferred to the consumers and they may shift some of their loads from high price periods to the low price periods in order to save their energy costs. The optimal load response to an electricity price...... for demand side management generates different load profiles and may provide an opportunity to improve the transient stability of power systems with high wind power penetrations. In this paper, the idea of the power system transient stability improvement by using optimal load response to the electricity...... price is proposed. A 102-bus power system which represents a simplified model of the western Danish power system is chosen as the study case. Simulation results show that the optimal load response to electricity prices is an effective measure to improve the power system transient stability with high...

Electric power market liberalization and demand-side management (DSM); Denryoku shijo jiyuka to DSM

Energy Technology Data Exchange (ETDEWEB)

Yajima, M. [Central Research Institute of Electric Power Industry, Tokyo (Japan)

1997-01-30

This paper explains effects of market liberalization which will lead to introducing competition in electric power business on demand-side management (DSM), by quoting examples mainly in the United States. The paper also describes the future outlook thereon. The DSM program in the United States has expanded for the period between 1989 through 1994. However, during the last few years, the movements of electric power market liberalization have come to force electric power business entities to change their management strategies and reduction in expense. This situation has resulted in reduction in the DSM budget. Future DSM programs are thought to diversify into the following types: a program such as load management which has effect of reducing expenses and investments in investment time periods of 5 to 10 years, a program effective for users such as high-efficiency motors which have effects of reducing expenses and improving efficiency in investment time periods of 3 to 5 years, a program which will be effective enough if market barriers are removed after the market conversions, but requires subsidies and purchase guarantees, and a social program intended for environmental effects and low-income users. 4 refs., 1 tab.

Transactive Demand Side Management Programs in Smart Grids with High Penetration of EVs

Directory of Open Access Journals (Sweden)

Poria Hasanpor Divshali

2017-10-01

Full Text Available Due to environmental concerns, economic issues, and emerging new loads, such as electrical vehicles (EVs, the importance of demand side management (DSM programs has increased in recent years. DSM programs using a dynamic real-time pricing (RTP method can help to adaptively control the electricity consumption. However, the existing RTP methods, particularly when they consider the EVs and the power system constraints, have many limitations, such as computational complexity and the need for centralized control. Therefore, a new transactive DSM program is proposed in this paper using an imperfect competition model with high EV penetration levels. In particular, a heuristic two-stage iterative method, considering the influence of decisions made independently by customers to minimize their own costs, is developed to find the market equilibrium quickly in a distributed manner. Simulations in the IEEE 37-bus system with 1141 customers and 670 EVs are performed to demonstrate the effectiveness of the proposed method. The results show that the proposed method can better manage the EVs and elastic appliances than the existing methods in terms of power constraints and cost. Also, the proposed method can solve the optimization problem quick enough to run in real-time.

An Integrated Decentralized Energy Planning Model considering Demand-Side Management and Environmental Measures

Directory of Open Access Journals (Sweden)

Seyed Mahmood Kazemi

2013-01-01

Full Text Available Decentralized energy planning (DEP is looked upon as an indisputable opportunity for energy planning of villages, isolated islands, and far spots. Nonetheless, at this decentralized planning level, the value of demand-side resources is not fairly examined, despite enjoying great advantages. Therefore, the core task of this study is to integrate demand-side resources, as a competing solution against supply-side alternatives, with decentralized energy planning decisions and demonstrate the rewarding role it plays. Moreover, sustainability indicators (SIs are incorporated into DEP attempts in order to attain sustainable development. It is emphasized that unless these indicators are considered at lower energy planning levels, they will be ignored at higher planning levels as well. Hence, to the best knowledge of the authors, this study for the first time takes into account greenhouse gas (GHG emissions produced by utilization of renewable energies in DEP optimization models. To address the issues mentioned previously, multiobjective linear programming model along with a min-max goal programming approach is employed. Finally, using data taken from the literature, the model is solved, and the obtained results are discussed. The results show that DSM policies have remarkably contributed to significant improvements especially in terms of environmental indicators.

Potential of Demand Side Management to Reduce Carbon Dioxide Emissions Associated with the Operation of Heat Pumps

Directory of Open Access Journals (Sweden)

Samuel J. G. Cooper

2013-06-01

Full Text Available This work considers the potential reduction in the carbon dioxide emissions associated with the operation of Air Source Heat Pump which could be achieved by using demand side management. In order to achieve significant reductions in carbon dioxide emissions, it is widely envisioned that electrification of the heating sector will need to be combined with decarbonisation of the electrical supply. By influencing the times at when electric heat pumps operate such that they coincide more with electricity generation which has a low marginal carbon emissions factor, it has been suggested that these emissions could be reduced further. In order to investigate this possibility, models of the UK electrical grid based on scenarios for 2020 to 2050 have been combined with a dynamic model of an air source heat pump unit and thermal models of a population of dwellings. The performance and carbon dioxide emissions associated with the heat pumps are compared both with and without demand side management interventions intended to give preference to operation when the marginal emissions factor of the electricity being generated is low. It is found that these interventions are unlikely to be effective at achieving further reductions in emissions. A reduction of around 3% was observed in scenarios based around 2035 but in other scenarios the reduction was insignificant. In the scenarios with high wind generation (2050, the DSM scheme considered here tends to improve thermal comfort (with minimal increases in emissions rather than achieving a decrease in emissions. The reasons for this are discussed and further recommendations are made.

Multicriteria evaluation of demand side management (DSM) implementation strategies in the Indian power sector

Energy Technology Data Exchange (ETDEWEB)

Vashishtha, Sanjay [Centre for Renewable Energy and Environmental Development (CREED), BITS, Pilani, Rajasthan 333031 (India); Ramachandran, M. [BITS Pilani Dubai Centre, Dubai (United Arab Emirates)

2006-09-15

In recent years, demand side management (DSM) has emerged as an efficient utility planning strategy for reducing capacity shortages and improving system load factors. The Indian government is adopting various policies to implement DSM programs. DSM implementation involves a variety of interests with conflicting objectives, and a range of possible implementation strategies with varying implications for effectiveness, cost, feasibility, efficiency and stakeholder acceptance. This necessitates a critical comparison of the strategies to determine a preferred strategy or combination of strategies from each specific stakeholder's point of view. The present study evaluates DSM implementation strategies from a multiobjective perspective using the Analytic Hierarchy Process (AHP). Eight strategies and six criteria were considered. Forty utility, regulator, and consumer stakeholders were surveyed. The most highly ranked strategies involved creating dedicated funds and providing technical support to end users for effective implementation of DSM. (author)

Smart grids and power systems efficiency: regulatory tools and demand-side management impacts

International Nuclear Information System (INIS)

Bergaentzle, Claire

2015-01-01

The physical architecture of electricity grids and the organizational structure of power systems implemented after the reforms have traditionally be achieved according to the characteristics of the transmission infrastructures and power mixes. However, the new challenges related to energy transition favor a greater participation of decentralized generation and final consumers to system exploitation and competitive markets. This latter participation is made possible thanks to recent innovations in the fields of communication and remote control technologies. Significant evolutions are expected in power industries that share common characteristics. First, these evolutions suppose massive capital investments to modernize and adapt current power distribution grids. Second, it is expected the activation of distribution grids and final consumers will unleash substantial unexploited economic efficiency gains as well as impose new constraints. Taking these simple facts as a starting point, the objective of the thesis is twofold. In the first place, we provide a theoretical analysis of the regulatory instruments that monitor the system operators' expenses. Relying on the literature, we aim at characterizing what regulatory tools and incitation are suitable for investing in smart grids technologies. Since it is necessary to compare theoretical formulation to facts, we use an empirical approach that allows us to designate key benefits pursued by the development of smart grids and to compare our theoretical results with practical regulatory applications. Our findings eventually allow us to formulate recommendations. In the second place, the thesis focuses on the impacts of demand-side management during peak periods. We structure our approach around two general observations. Large benefits should be generated in lowering substantially peak demand. However, such situation also creates losses of profit for generators. We provide an estimation of efficiency gains and revenue losses

Demand side management at Enbridge and best practices in Canada

Energy Technology Data Exchange (ETDEWEB)

Hunt, K.; Griffin, B. [Enbridge Gas Distribution, Toronto, ON (Canada)

2004-07-01

In 1994, the Ontario Energy Board required that gas utilities implement DSM programs for all customers. Enbridge began delivering demand side management (DSM) programs in 1995. DSM is now fully integrated with marketing. DSM programs are delivered across the residential, commercial, industrial, and multi-residential sectors. In 1997, Enbridge introduced the Steam Saver Program for customers who own mid-sized and large steam boilers. The program is now saving customers over 41 million cubic metres of gas per year, representing over $10 million annually. Steam boiler plants burn 30 per cent of all fuel in Ontario. They include natural gas, oil, wood or coal. This paper included a table listing the annual fuel consumption and cost for 1,200 boiler plants in Ontario. The Steam Saver Program identified steam efficiency projects in the customer's plant, provided a business case for the customer and provided technical and financial help to implement the project. The average financial payback on steam efficiency projects is 1.7 years. This paper also described Enbridge's Natural Gas Construction Heater Program for new residential construction markets. The program promotes the benefits of natural gas construction heaters as an alternative to propane salamanders for curing concrete walls in basements, drywall drying, and thawing soil for basement floors before pouring concrete. The natural gas construction heaters are also more suitable for heating the home before a central furnace system is activated. 3 tabs., 6 figs.

Implementation of a demand elasticity model in the building energy management system

NARCIS (Netherlands)

Ożadowicz, A.; Grela, J.; Babar, M.

2016-01-01

Nowadays, crucial part of modern Building Automation and Control Systems (BACS) is electric energy management. An active demand side management is very important feature of a Building Energy Management Systems (BEMS) integrated within the BACS. Since demand value changes in time and depends on

Research on electricity market operation mechanism and its benefit of demand side participation

Science.gov (United States)

Han, Shuai; Yan, Xu; Qin, Li-juan; Lin, Xi-qiao; Zeng, Bo

2017-08-01

Demand response plays an important role in maintaining the economic stability of the system, and has the characteristics of high efficiency, low cost, fast response, good environmental benefits and so on. Demand side resource is an important part of electricity market. The research of demand side resources in our country is still in the initial stage, but the opening of the electricity sales side provides a broad prospect for the development of electricity market. This paper summarizes the main types of demand side resources in our country, analyzes the economic principle of demand response from the micro perspective, puts forward some suggestions on the operation mechanism of China’s demand side resources participating in the electricity market under the condition of electricity sales side opening, analyzes the current situation of pricing in the electricity wholesale market and sets up the pricing strategy of the centralized wholesale market with the demand side power supply participating in quotation, which makes the social and economic benefits reach the maximum.

Communications technologies for demand side management, DSM, and European utility communications architecture, EurUCA

Energy Technology Data Exchange (ETDEWEB)

Kaerkkaeinen, S.; Kekkonen, V. [VTT Energy, Espoo (Finland); Rissanen, P. [Tietosavo Oy (Finland)

1996-12-31

In this project the main target is to develop and assess methods for DSM (Demand Side Management) and distribution automation planning from the utility`s point of view. The final goal is to integrate these methods for the strategic planning of electric utilities. In practice the project is divided into four main parts: The development and assessment of DSM/IRP planning methods and cost/benefit analysis as a part of international co-operation (IEA DSM Agreement: Annex IV, European Cost/Benefit analysis of DSM, EUBC, and Finnish SAVE-project started in 1995 in co-operation with SRC International and six electric utilities in Finland); Development of PC-based DSM planning and assessment tools at VTT; Development of a decision support system of distribution network planning including DSM options at Tietosavo Oy and Integration of DSM planning and network planning tools in co-operation with VTT Energy and Tietosavo Oy

Communications technologies for demand side management, DSM, and European utility communications architecture, EurUCA

Energy Technology Data Exchange (ETDEWEB)

Kaerkkaeinen, S; Kekkonen, V [VTT Energy, Espoo (Finland); Rissanen, P [Tietosavo Oy (Finland)

1997-12-31

In this project the main target is to develop and assess methods for DSM (Demand Side Management) and distribution automation planning from the utility`s point of view. The final goal is to integrate these methods for the strategic planning of electric utilities. In practice the project is divided into four main parts: The development and assessment of DSM/IRP planning methods and cost/benefit analysis as a part of international co-operation (IEA DSM Agreement: Annex IV, European Cost/Benefit analysis of DSM, EUBC, and Finnish SAVE-project started in 1995 in co-operation with SRC International and six electric utilities in Finland); Development of PC-based DSM planning and assessment tools at VTT; Development of a decision support system of distribution network planning including DSM options at Tietosavo Oy and Integration of DSM planning and network planning tools in co-operation with VTT Energy and Tietosavo Oy

Feasibility and potential of thermal demand side management in residential buildings considering different developments in the German energy market

International Nuclear Information System (INIS)

Wolisz, Henryk; Punkenburg, Carl; Streblow, Rita; Müller, Dirk

2016-01-01

Highlights: • A scenario analysis for the German energy market in the year 2030 is performed. • Growing demand for flexible electric capacities is identified in all scenarios. • Significant potential for domestic demand side management is identified. • A distinct potential for dynamic operation of domestic supply systems is found. • The necessity for a quick introduction of smart metering and control is found. - Abstract: A transition in the electricity market is required to manage the volatility of increasing renewable energy generation. These fluctuations can be faced with flexible consumption through Demand Side Management (DSM), establishment of further centralized storage capacities and provisioning of dynamic back up generation capacities. At least the latter two options can impose large establishment and operation costs upon the electricity market. Therefore, the feasibility and the resulting potential of coupling the electricity grid with the thermal supply of residential buildings is analysed in this paper. Thereby, inexpensive and widespread thermal storage capacities could be used to improve the integration of dynamic renewable electricity generation. In this paper the technical and economical key impact factors for such thermal DSM approach are elaborated. Based on a literature review, the identified key factors are aggregated to form consistent scenarios of the German “Energiewende” (turnaround in energy policy). The practicability and possible magnitude of the intended DSM is then analysed based on the identified scenarios. All resulting scenarios highlight the growing demand for a flexible electricity market. Especially in scenarios with strong growth of renewable electricity generation, up to 45 GW of flexible electric capacities would be required in Germany by the year 2030. Furthermore, the analysis demonstrates that independently of the energy market development, it is very likely that electricity coupled supply systems will

Exploring Community-Oriented Approaches in Demand Side Management Projects in Europe

Directory of Open Access Journals (Sweden)

Anna Mengolini

2016-12-01

Full Text Available This paper seeks to investigate if the theoretical and political trends towards a more collective dimension of energy use are reflected in the design and development of demand side management (DSM pilot projects in Europe. Specifically, the paper analyses DSM projects in the database of the Joint Research Centre (JRC of the European Commission to capture signs of a new attention towards the wider context in which consumers live and towards the social dimension associated with energy consumption. To this end, the paper investigates the projects’ scope (in terms of project’s partners, end-use sectors and targeted services as well as the consumer engagement strategies that projects use. These elements reflect the projects’ consideration for the socio-economic dimension of the community where the pilots take place and their inclination to build on community dynamics. The analysis shows that DSM projects in the EU are increasingly being designed and developed with a collegial approach to energy consumption in mind, although an integrated approach is still missing. In addition, research is still needed to link the use of this innovative approach to project results. A closer look at the developments and results of these projects can help to identify what works and what doesn’t in real life experiences, thus supporting effective policy making at the EU and national level.

Marketing demand management in the commercial sector

International Nuclear Information System (INIS)

Fraser, M.E.

1990-01-01

Ontario Hydro has a marketing strategy for designing and implementing demand side management (DSM) programs, which marks a turnaround from previous years when marketing efforts were concentrated on selling electricity. Starting in the 1980s, marketing activities consisted, in effect, of coordinating relations between the customer, the market, and the utility. To achieve a better understanding of the needs of customers, the nature of the energy market, and the utilization of energy, the utility conducted research on the decision-making process associated with consumer choices of energy systems. To develop relations with its clientele in the commercial sector, the utility published an information bulletin and prepared an energy guide. Along with this initiative, the number of energy advisers to the commercial sector was increased in Ontario Hydro's regional offices. To improve understanding of each segment of the commercial market, the utility contacted organizations representing each segment as well as broader based organizations with the objective of creating opportunities to address this market, for example at conferences. Because of this philosophy of satisfying and understanding customer needs, Ontario Hydro has been in the process of commercializing demand-side management. Its high-efficiency lighting program is a good example in this regard. From a strategy which focused on a simple reduction in lighting in the 1970s, the utility has turned toward promoting efficient high-quality lighting which better responds to industry needs, to the point where industry itself has begun to promote the program. Such a strategy benefits industry, customers, and Ontario Hydro's demand-side management programs

Supply-side and demand-side policies for biosimilars: an overview in 10 European member states.

Science.gov (United States)

Rémuzat, Cécile; Kapuśniak, Anna; Caban, Aleksandra; Ionescu, Dan; Radière, Guerric; Mendoza, Cyril; Toumi, Mondher

2017-01-01

This study aimed to provide an overview of biosimilar policies in 10 EU MSs. Methods : Ten EU MS pharmaceutical markets (Belgium, France, Germany, Greece, Hungary, Italy, Poland, Spain, Sweden, and the UK) were selected. A comprehensive literature review was performed to identify supply-side and demand-side policies in place in the selected countries. Results : Supply-side policies for biosimilars commonly include price linkage, price re-evaluation, and tendering; the use of internal or external reference pricing varies between countries; health technology assessment is conducted in six countries. Regarding demand-side policies, pharmaceutical prescription budgets or quotas and monitoring of prescriptions (with potential financial incentives or penalties) are in place in eight and in seven countries respectively. Switching is generally allowed, but is solely the physician's responsibility. Automatic substitution is not recommended, or even forbidden, in most EU MSs. Prescription conditions or guidelines that apply to biosimilars are established in nearly all surveyed EU MSs. Conclusions : Important heterogeneity in policies on biosimilars was seen between (and even within) selected countries, which may partly explain variations in biosimilar uptake. Supply-side policies targeting price have been reported to limit biosimilar penetration in the long term, despite short-term savings, while demand-side policies are considered to positively impact uptake.

A Hybrid Genetic Wind Driven Heuristic Optimization Algorithm for Demand Side Management in Smart Grid

Directory of Open Access Journals (Sweden)

Nadeem Javaid

2017-03-01

Full Text Available In recent years, demand side management (DSM techniques have been designed for residential, industrial and commercial sectors. These techniques are very effective in flattening the load profile of customers in grid area networks. In this paper, a heuristic algorithms-based energy management controller is designed for a residential area in a smart grid. In essence, five heuristic algorithms (the genetic algorithm (GA, the binary particle swarm optimization (BPSO algorithm, the bacterial foraging optimization algorithm (BFOA, the wind-driven optimization (WDO algorithm and our proposed hybrid genetic wind-driven (GWD algorithm are evaluated. These algorithms are used for scheduling residential loads between peak hours (PHs and off-peak hours (OPHs in a real-time pricing (RTP environment while maximizing user comfort (UC and minimizing both electricity cost and the peak to average ratio (PAR. Moreover, these algorithms are tested in two scenarios: (i scheduling the load of a single home and (ii scheduling the load of multiple homes. Simulation results show that our proposed hybrid GWD algorithm performs better than the other heuristic algorithms in terms of the selected performance metrics.

Climate-related electricity demand-side management in oil-exporting countries--the case of the United Arab Emirates

International Nuclear Information System (INIS)

Al-Iriani, Mahmoud A.

2005-01-01

The oil crisis of the 1970s has increased the concern about the continuity of oil imports flow to major oil-importing developed countries. Numerous policy measures including electricity demand-side management (DSM) programs have been adopted in such countries. These measures aim at reducing the growing need for electricity power that increases the dependency on imported foreign oil and damages the environment. On the other hand, the perception that energy can be obtained at very low cost in oil-rich countries led to less attention being paid to the potential of DSM policies in these countries. This paper discusses such potential using the case of the United Arab Emirates (UAE). Since air conditioning is a major source of electric energy consumption, the relationship between climate conditions and electric energy consumption is considered. An electricity demand model is constructed using time series techniques. The fitted model seems to represent these relationships rather well. Forecasts for electricity consumption using the estimated model indicate that a small reduction in cooling degrees requirement might induce a significant reduction in electric energy demand. Hence, a DSM program is proposed with policy actions to include, among others, measures to reduce cooling degrees requirement

Report of the advisory group on demand-side management and demand response in Ontario in response to the Minister's directive to the Ontario Energy Board

International Nuclear Information System (INIS)

2003-01-01

The Ontario Energy Board was directed in June 2003 to consult with stakeholders to identify and review options for the delivery of demand-side management (DSM) and demand response (DR) activities within the electricity sector, including the role of local distribution companies (distributors) in such activities. A total of 118 stakeholders participated in the consultation process, and 31 representatives from all sectors were then invited to take part in an advisory working group to develop options to be considered by the Board when preparing the recommendations to the Minister. This report presents a consolidation of the Group's working documents and the results of deliberations both as a unit and in small groups. The best way to present the many newly developed models was as a single Central Agency model demonstrating variations in the role of the Central Agency and other players in the electricity market. The paper was divided into the following six sections: introduction; market issues; demand response framework option; central agency framework-alternative models; Ontario Energy Board-wires companies DSM framework; and, general issues

Demand Side Management in Nearly Zero Energy Buildings Using Heuristic Optimizations

Directory of Open Access Journals (Sweden)

Nadeem Javaid

2017-08-01

Full Text Available Today’s buildings are responsible for about 40% of total energy consumption and 30–40% of carbon emissions, which are key concerns for the sustainable development of any society. The excessive usage of grid energy raises sustainability issues in the face of global changes, such as climate change, population, economic growths, etc. Traditionally, the power systems that deliver this commodity are fuel operated and lead towards high carbon emissions and global warming. To overcome these issues, the recent concept of the nearly zero energy building (nZEB has attracted numerous researchers and industry for the construction and management of the new generation buildings. In this regard, this paper proposes various demand side management (DSM programs using the genetic algorithm (GA, teaching learning-based optimization (TLBO, the enhanced differential evolution (EDE algorithm and the proposed enhanced differential teaching learning algorithm (EDTLA to manage energy and comfort, while taking the human preferences into consideration. Power consumption patterns of shiftable home appliances are modified in response to the real-time price signal in order to get monetary benefits. To further improve the cost and user discomfort objectives along with reduced carbon emission, renewable energy sources (RESs are also integrated into the microgrid (MG. The proposed model is implemented in a smart residential complex of multiple homes under a real-time pricing environment. We figure out two feasible regions: one for electricity cost and the other for user discomfort. The proposed model aims to deal with the stochastic nature of RESs while introducing the battery storage system (BSS. The main objectives of this paper include: (1 integration of RESs; (2 minimization of the electricity bill (cost and discomfort; and (3 minimizing the peak to average ratio (PAR and carbon emission. Additionally, we also analyze the tradeoff between two conflicting objectives

Metering systems and demand-side management models applied to hybrid renewable energy systems in micro-grid configuration

International Nuclear Information System (INIS)

Blasques, L.C.M.; Pinho, J.T.

2012-01-01

This paper proposes a demand-side management model integrated to a metering system for hybrid renewable energy systems in micro-grid configuration. The proposal is based on the management problems verified in most of this kind of renewable hybrid systems installed in Brazil. The main idea is the implementation of a pre-paid metering system with some control functions that directly act on the consumer demand, restricting the consumption proportionally to the monthly availability of renewable energy. The result is a better distribution of the electricity consumption by month and by consumer, preventing that only one user, with larger purchasing power, consumes all the renewable energy available at some time period. The proportionality between the consumption and the renewable energy's availability has the objective to prevent a lack of energy stored and a high use of the diesel generator-set on months of low renewable potential. This paper also aims to contribute to the Brazilian regulation of renewable energy systems supplying micro-grids. - Highlights: ► Review of the Brazilian electricity regulation for small-scale isolated systems. ► Renewable systems are the most feasible option in several isolated communities. ► One proposal is to guarantee government subsidies for renewable energy systems. ► Smart electronic meters to create electricity restrictions for the consumers.

Review of US utility demand-side bidding programs

International Nuclear Information System (INIS)

Goldman, C.A.; Kito, M.S.

1995-01-01

In this study, we review utility experiences with demand-side management (DSM) bidding programs. Since 1987, about 35 US utilities have signed long-term contracts with developers of DSM resources (ie energy service companies and customers) to provide a quantity of demand and energy savings at specified prices. Total resource costs range between 5.4 and 8 cents/kWh for DSM bidding programs where complete information on program costs is available. Almost all DSM bidding programs have been cost-effective compared with the utility's own supply-side alternatives, although there is substantial disagreement regarding the value of these programs compared with the utility's own DSM programs. In most bidding programs, payments to bidders account for between 70 and 90% of total program costs. Variation in winning bid prices is influenced primarily by DSM bid ceiling prices, differences in the mix of measures and markets targeted by developers, and the degree of performance risk borne by the DSM developer. Bids targeting residential customers averaged 6.2 cents/kWh compared with about 5.0 cents/kWh for commercial/industrial bids. We also compared the costs of acquiring lighting savings in DSM bidding contracts with a sample of 20 utility sponsored commercial/industrial lighting programs. We found that, on average total resource costs were slightly higher in bidding programs (6.1 vs 5.6 cents/kWh), although ratepayers bear significantly less performance risk in bidding programs compared with traditional utility-sponsored DSM programs. (author)

Supply-side and demand-side policies for biosimilars: an overview in 10 European member states

Science.gov (United States)

Rémuzat, Cécile; Kapuśniak, Anna; Caban, Aleksandra; Ionescu, Dan; Radière, Guerric; Mendoza, Cyril; Toumi, Mondher

2017-01-01

ABSTRACT Objective: This study aimed to provide an overview of biosimilar policies in 10 EU MSs. Methods: Ten EU MS pharmaceutical markets (Belgium, France, Germany, Greece, Hungary, Italy, Poland, Spain, Sweden, and the UK) were selected. A comprehensive literature review was performed to identify supply-side and demand-side policies in place in the selected countries. Results: Supply-side policies for biosimilars commonly include price linkage, price re-evaluation, and tendering; the use of internal or external reference pricing varies between countries; health technology assessment is conducted in six countries. Regarding demand-side policies, pharmaceutical prescription budgets or quotas and monitoring of prescriptions (with potential financial incentives or penalties) are in place in eight and in seven countries respectively. Switching is generally allowed, but is solely the physician’s responsibility. Automatic substitution is not recommended, or even forbidden, in most EU MSs. Prescription conditions or guidelines that apply to biosimilars are established in nearly all surveyed EU MSs. Conclusions: Important heterogeneity in policies on biosimilars was seen between (and even within) selected countries, which may partly explain variations in biosimilar uptake. Supply-side policies targeting price have been reported to limit biosimilar penetration in the long term, despite short-term savings, while demand-side policies are considered to positively impact uptake. PMID:28740617

Deep Neural Network Based Demand Side Short Term Load Forecasting

Directory of Open Access Journals (Sweden)

Seunghyoung Ryu

2016-12-01

Full Text Available In the smart grid, one of the most important research areas is load forecasting; it spans from traditional time series analyses to recent machine learning approaches and mostly focuses on forecasting aggregated electricity consumption. However, the importance of demand side energy management, including individual load forecasting, is becoming critical. In this paper, we propose deep neural network (DNN-based load forecasting models and apply them to a demand side empirical load database. DNNs are trained in two different ways: a pre-training restricted Boltzmann machine and using the rectified linear unit without pre-training. DNN forecasting models are trained by individual customer’s electricity consumption data and regional meteorological elements. To verify the performance of DNNs, forecasting results are compared with a shallow neural network (SNN, a double seasonal Holt–Winters (DSHW model and the autoregressive integrated moving average (ARIMA. The mean absolute percentage error (MAPE and relative root mean square error (RRMSE are used for verification. Our results show that DNNs exhibit accurate and robust predictions compared to other forecasting models, e.g., MAPE and RRMSE are reduced by up to 17% and 22% compared to SNN and 9% and 29% compared to DSHW.

Effect of demand management on regulated and deregulated electricity sectors

International Nuclear Information System (INIS)

Fahrioglu, Murat

2016-01-01

Our society derives a quantifiable benefit from electric power. In particular, forced outages or blackouts have enormous consequences on society, one of which is loss of economic surplus. The society relies on having a continuous supply of electrical energy. Some customers may willingly risk this continuous supply and participate in demand management programs for electrical power. If the power system grid is in trouble, electric utilities need to have demand relief. Customers willing to reduce their demand to help the system can receive an incentive fee for helping the utilities. Demand relief can be system wide or location specific. Sometimes it can be more effective to fix the electrical demand vs. supply imbalance from the demand side. The value of demand management contracts is greatly affected by customer location. Inclusion of locational attributes into the contract design procedure increases the effectiveness of the contracts by helping a utility get more value from its demand management programs. Independent System Operators and regulators, among others, can also benefit from effective demand management. This paper will investigate how this type of demand management contracts can help the electricity sector both in regulated and deregulated environments. - Highlights: • Demand management can help prevent forced electricity outages. • Both electric utilities and ISOs can use demand management. • Regulated and deregulated electricity sectors can benefit from demand management. • Demand management contracts can be effectively used in power system grids.

From demand side management (DSM) to energy efficiency services: A Finnish case study

International Nuclear Information System (INIS)

Apajalahti, Eeva-Lotta; Lovio, Raimo; Heiskanen, Eva

2015-01-01

Energy conservation is expected to contribute significantly to climate change mitigation and energy security. Traditionally, energy companies have had strong role in providing Demand Side Management (DSM) measures. However, after energy market liberalization in Europe, energy companies' DSM activities declined. In response, the EU issued Directive (2006/32/EC) on energy end-use efficiency and energy services (ESD) to motivate energy companies to promote energy efficiency and conservation, closely followed by Directive (2012/27/EU) on energy efficiency (EED), requiring the setting up energy efficiency obligation schemes. Despite strong political and economic motivation, energy companies struggle to develop energy efficiency services in liberalised energy markets due to conflicting institutional demands, which arise from contradicting policy requirements and customer relations. The main challenges in developing new innovative energy efficiency services, evidenced by an in-depth case study, were (1) the unbundling of energy company operations, which makes it difficult to develop services when the contribution of several business units is required and (2) the distrust among energy end-users, which renders the business logic of energy saving contract models self-contradictory. On the basis of the research, avenues out of these dilemmas are suggested. -- Highlights: •Energy companies struggle to become energy service provides •We explore the development of new energy saving business solutions •Dispersed organisational structure leaves energy saving business as isolated function •Strong consumer scepticism towards energy companies as providers of energy saving •More emphasis on the changing company-customer relationship is needed

Challenges of using model predictive control for active demand side management

DEFF Research Database (Denmark)

Zong, Yi; You, Shi; Hu, Junjie

2015-01-01

When there is a high penetration of renewables in the power system, it requires coordinated management of large numbers of distributed and demand response resources, intermittent resources to maintain the grid reliability and improve operational economics. This paper presents a hierarchical...... and dynamic power price signals....

Financial incentives for DSM [demand-side management]: Theory and practice

International Nuclear Information System (INIS)

Reid, M.W.

1990-01-01

Recent efforts to provide incentives for electric utilities in the USA to undertake demand-side management (DSM) programs are reviewed. The major need for incentives is seen as the overcoming of disincentives inherent in traditional regulation that affect utilities' interest in, and motivation for, DSM programs. These disincentives include the failure to recover all program costs, loss of revenues, and loss of financial opportunity. In addition, utilities seldom perceive DSM as a low-risk proposition; principal areas of concern include regulatory risk, competitive risk, and balance sheet risk. In view of these disincentives and risks, any DSM program therefore should provide for full and timely recovery of all program costs; adjust for DSM-induced revenue losses; and counterbalance risk and loss of financial opportunity by providing a bonus above cost. Three utility-specific incentive proposals are presented for the case of utilities in New York, Massachusetts, and Pennsylvania. Each of these programs meets the goal of overcoming the disincentives that surround utility DSM programs. The most significant differences across the mechanisms are found in the bonus component. Mechanisms that reduce the utility's uncertainty about the receipt of a bonus by providing it in a lump sum will likely prove more powerful motivators than those that spread the bonus out over a period of years. Use of preapproved per-unit or per-customer impact measurements reduces uncertainty and thus increases the apparent value of the bonus. Annual review of program plans and assumed impacts, supported by continuing evaluation activities, minimizes the risk that the utilities will gamble with the system or receive excessive awards. 6 refs

Demand side management in a day-ahead wholesale market: A comparison of industrial & social welfare approaches

International Nuclear Information System (INIS)

Jiang, Bo; Farid, Amro M.; Youcef-Toumi, Kamal

2015-01-01

Highlights: • We compare two demand side management in a day-ahead electricity wholesale market. • We develop and reconcile social welfare & industrial DSM mathematical models. • We show the industrial netload has an additional forecast quantity of baseline. • We analytically and numerically show the model equivalence with accurate baseline. • We numerically demonstrate the baseline errors lead to higher and costlier dispatch. - Abstract: The intermittent nature of renewable energy has been discussed in the context of the operational challenges that it brings to electrical grid reliability. Demand side management (DSM) with its ability to allow customers to adjust electricity consumption in response to market signals has often been recognized as an efficient way to mitigate the variable effects of renewable energy as well as to increase system efficiency and reduce system costs. However, the academic & industrial literature have taken divergent approaches to DSM implementation. While the popular approach among academia adopts a social welfare maximization formulation, the industrial practice compensates customers according to their load reduction from a predefined electricity consumption baseline that would have occurred without DSM. This paper rigorously compares these two different approaches in a day-ahead wholesale market context analytically and in a test case using the same system configuration and mathematical formalism. The comparison of the two models showed that a proper reconciliation of the two models might make them mitigate the stochastic netload in fundamentally the same way, but only under very specific conditions which are rarely met in practice. While the social welfare model uses a stochastic net load composed of two terms, the industrial DSM model uses a stochastic net load composed of three terms including the additional baseline term. DSM participants are likely to manipulate the baseline in order to receive greater financial

Optimal energy efficiency policies and regulatory demand-side management tests: How well do they match?

International Nuclear Information System (INIS)

Brennan, Timothy J.

2010-01-01

Under conventional models, subsidizing energy efficiency requires electricity to be priced below marginal cost. Its benefits increase when electricity prices increase to finance the subsidy. With high prices, subsidies are counterproductive unless consumers fail to make efficiency investments when private benefits exceed costs. If the gain from adopting efficiency is only reduced electricity spending, capping revenues from energy sales may induce a utility to substitute efficiency for generation when the former is less costly. This goes beyond standard 'decoupling' of distribution revenues from sales, requiring complex energy price regulation. The models' results are used to evaluate tests in the 2002 California Standard Practice Manual for assessing demand-side management programs. Its 'Ratepayer Impact Measure' test best conforms to the condition that electricity price is too low. Its 'Total Resource Cost' and 'Societal Cost' tests resemble the condition for expanded decoupling. No test incorporates optimality conditions apart from consumer choice failure.

Demand-Side Flexibility for Energy Transitions: Policy Recommendations for Developing Demand Response

OpenAIRE

Nursimulu, Anjali; Florin, Marie-Valentine; Vuille, François

2016-01-01

As a follow-up to IRGC's report on demand-side flexibility for energy transitions, this Policy Brief highlights that increasing flexibility in power systems is needed to accommodate higher shares of non-controllable and intermittent renewable generation, and that this requires changes to the market design and regulatory framework, to facilitate the development and deployment of appropriate technologies and market-based instruments (e.g. taxes and subsidies). The Policy Brief focuses on demand...

A Multi-Objective Demand Side Management Considering ENS Cost in Smart Grids

DEFF Research Database (Denmark)

Yousefi Khanghah, Babak; Ghassemzadeh, Saeid; Hosseini, Seyed Hossein

2017-01-01

In this paper a new method is presented to achieve economic exploitation and proper usage of network capacity by exerting controlling actions over flexible loads and energy storage (ES) equipment. Multi-objective planning for demand response programs (DRP) and battery management policies is carried...... out by considering energy not supplied (ENS). In order to achieve an optimal scheduling, charge/discharge control for batteries, demand response programs and dispatch of controllable distributed generations (DGs) are also considered. Then, the balanced cost and benefits of participants are evaluated...

Lessons learned from new construction utility demand side management programs and their implications for implementing building energy codes

Energy Technology Data Exchange (ETDEWEB)

Wise, B.K.; Hughes, K.R.; Danko, S.L.; Gilbride, T.L.

1994-07-01

This report was prepared for the US Department of Energy (DOE) Office of Codes and Standards by the Pacific Northwest Laboratory (PNL) through its Building Energy Standards Program (BESP). The purpose of this task was to identify demand-side management (DSM) strategies for new construction that utilities have adopted or developed to promote energy-efficient design and construction. PNL conducted a survey of utilities and used the information gathered to extrapolate lessons learned and to identify evolving trends in utility new-construction DSM programs. The ultimate goal of the task is to identify opportunities where states might work collaboratively with utilities to promote the adoption, implementation, and enforcement of energy-efficient building energy codes.

The electric energy demand-side planning: necessity and possibilities of execution

International Nuclear Information System (INIS)

Sposito, E.S.

1991-05-01

Aiming at reducing the level of investments, is presented a demand-side planning approach, divided into two parts. The first part is an analysis on the actual need of our demand-side approaching. In view of this, is showed a set of data and comments both on economic and technological aspects concerning the electric network and sector, as well as evaluation of the social, ecological and financial aspects which could act against the full expansion of the electric system. In the second part, a demand-side planning methodology is introduced, as well as its main concepts, its variables and its instruments of affecting the demand: energy conservation, replacement of sources, reduction of losses and electric power decentralized generation. Each of them is fully detailed in a set of planning policies and actions. Concluding is presented the basic elements of a National Electric Energy Substitution and Conservation Plan - PLANSCON. (author)

Impact of Demand-Side Management on Thermal Comfort and Energy Costs in a Residential nZEB

Directory of Open Access Journals (Sweden)

Thibault Q. Péan

2017-05-01

Full Text Available In this study, simulation work has been carried out to investigate the impact of a demand-side management control strategy in a residential nZEB. A refurbished apartment within a multi-family dwelling representative of Mediterranean building habits was chosen as a study case and modelled within a simulation framework. A flexibility strategy based on set-point modulation depending on the energy price was applied to the building. The impact of the control strategy on thermal comfort was studied in detail with several methods retrieved from the standards or other literature, differentiating the effects on day and night living zones. It revealed a slight decrease of comfort when implementing flexibility, although this was not prejudicial. In addition, the applied strategy caused a simultaneous increase of the electricity used for heating by up to 7% and a reduction of the corresponding energy costs by up to around 20%. The proposed control thereby constitutes a promising solution for shifting heating loads towards periods of lower prices and is able to provide benefits for both the user and the grid sides. Beyond that, the activation of energy flexibility in buildings (nZEB in the present case will participate in a more successful integration of renewable energy sources (RES in the energy mix.

On the Mobile Communication Requirements for the Demand-Side Management of Electric Vehicles

Directory of Open Access Journals (Sweden)

Stefano Rinaldi

2018-05-01

Full Text Available The rising concerns about global warming and environmental pollution are increasingly pushing towards the replacement of road vehicles powered by Internal Combustion Engines (ICEs. Electric Vehicles (EVs are generally considered the best candidates for this transition, however, existing power grids and EV management systems are not yet ready for a large penetration of EVs, and the current opinion of the scientific community is that further research must be done in this field. The so-called Vehicle-to-Grid (V2G concept plays a relevant role in this scenario by providing the communication capabilities required by advanced control and Demand-Side Management (DSM strategies. Following this research trend, in this paper the communication requirements for the DSM of EVs in urban environments are discussed, by focusing on the mobile communication among EVs and smart grids. A specific system architecture for the DSM of EVs moving inside urban areas is proposed and discussed in terms of the required data throughput. In addition, the use of a Low-Power Wide-Area Network (LPWAN solution—the Long-Range Wide Area Network (LoRaWAN technology—is proposed as a possible alternative to cellular-like solutions, by testing an experimental communication infrastructure in a real environment. The results show that the proposed LPWAN technology is capable to handle an adequate amount of information for the considered application, and that one LoRa base station is able to serve up to 438 EVs per cell, and 1408 EV charging points.

Market modeling for assessment of demand side programs using the marginal cost

International Nuclear Information System (INIS)

Papastamatiou, Panagiotis; Psarras, John

2000-01-01

Demand side management is nowadays considered as a functional step in the energy planning process. The criteria proposed for the assessment of the demand side programs (DSPs) are usually based on the balance between the marginal supply cost and the mean DSP cost. These criteria could not support the allotting of the invested capital to incentives for the consumers and advertising. This paper presents a methodology to support the utility planning at this point with more reliability. It proposes the expansion of the assessment criteria with the use of the marginal cost of the DSP. For the calculation of the DSP marginal cost, a dynamic model is developed and it is used for the simulation of the penetration of a DS Program. Using the 'least-cost' criterion as the decision rule for the simulation, the planner has a distribution of the available investment capital throughout the whole planning period. The use of the 'most-value' criterion supports the separation of the invested capital between incentives for the consumers and supportive expenses, e.g. advertising, marketing cost, etc. (Author)

New Real-Time Market Facilitating Demand-Side Resources for System Balancing

DEFF Research Database (Denmark)

Feng, Donghan; Nyeng, Preben; Xie, Jun

2011-01-01

Many demand side resources have the potential to provide fast and low cost balancing services. Switching these devices on and off can be executed in seconds and have limited consequences for the customers if the duration is not long. With carefully designed market rules, tens of thousands...... the participation of demand-side resources. In light of the future environment of increasing intermittent renewable power and distributed energy/storage resources, stochastic time-series and Monte-Carlo simulation are used to analyze the relationship between balancing requirement and generation/demand uncertainties...

The past, present, and future of U.S. utility demand-side management programs

International Nuclear Information System (INIS)

Eto, J.

1996-12-01

Demand-side management or DSM refers to active efforts by electric and gas utilities to modify customers' energy use patterns. The experience in the US shows that utilities, when provided with appropriate incentives, can provide a powerful stimulus to energy efficiency in the private sector. This paper describes the range and history of DSM programs offered by US electric utilities, with a focus on the political, economic, and regulatory events that have shaped their evolution. It also describes the changes these programs are undergoing as a result of US electricity industry restructuring. DSM programs began modestly in the 1970s in response to growing concerns about dependence on foreign sources of oil and environmental consequences of electricity generation, especially nuclear power. The foundation for the unique US partnership between government and utility interests can be traced first to the private-ownership structure of the vertically integrated electricity industry and second to the monopoly franchise granted by state regulators. Electricity industry restructuring calls into question both of these basic conditions, and thus the future of utility DSM programs for the public interest. Future policies guiding ratepayer-funded energy-efficiency DSM programs will need to pay close attention to the specific market objectives of the programs and to the balance between public and private interests

The past, present, and future of U.S. utility demand-side management programs

Energy Technology Data Exchange (ETDEWEB)

Eto, J. [Lawrence Berkeley National Lab., CA (United States). Environmental Energy Technologies Div.

1996-12-01

Demand-side management or DSM refers to active efforts by electric and gas utilities to modify customers` energy use patterns. The experience in the US shows that utilities, when provided with appropriate incentives, can provide a powerful stimulus to energy efficiency in the private sector. This paper describes the range and history of DSM programs offered by US electric utilities, with a focus on the political, economic, and regulatory events that have shaped their evolution. It also describes the changes these programs are undergoing as a result of US electricity industry restructuring. DSM programs began modestly in the 1970s in response to growing concerns about dependence on foreign sources of oil and environmental consequences of electricity generation, especially nuclear power. The foundation for the unique US partnership between government and utility interests can be traced first to the private-ownership structure of the vertically integrated electricity industry and second to the monopoly franchise granted by state regulators. Electricity industry restructuring calls into question both of these basic conditions, and thus the future of utility DSM programs for the public interest. Future policies guiding ratepayer-funded energy-efficiency DSM programs will need to pay close attention to the specific market objectives of the programs and to the balance between public and private interests.

Controlling market power and price spikes in electricity networks: Demand-side bidding.

Science.gov (United States)

Rassenti, Stephen J; Smith, Vernon L; Wilson, Bart J

2003-03-04

In this article we report an experiment that examines how demand-side bidding can discipline generators in a market for electric power. First we develop a treatment without demand-side bidding; two large firms are allocated baseload and intermediate cost generators such that either firm might unilaterally withhold the capacity of its intermediate cost generators from the market to benefit from the supracompetitive prices that would result from only selling its baseload units. In a converse treatment, ownership of some of the intermediate cost generators is transferred from each of these firms to two other firms such that no one firm could unilaterally restrict output to spawn supracompetitive prices. Having established a well controlled data set with price spikes paralleling those observed in the naturally occurring economy, we also extend the design to include demand-side bidding. We find that demand-side bidding completely neutralizes the exercise of market power and eliminates price spikes even in the presence of structural market power.

Domestic demand-side management (DSM): Role of heat pumps and thermal energy storage (TES) systems

International Nuclear Information System (INIS)

Arteconi, A.; Hewitt, N.J.; Polonara, F.

2013-01-01

Heat pumps are seen as a promising technology for load management in the built environment, in combination with the smart grid concept. They can be coupled with thermal energy storage (TES) systems to shift electrical loads from high-peak to off-peak hours, thus serving as a powerful tool in demand-side management (DSM). This paper analyzes heat pumps with radiators or underfloor heating distribution systems coupled with TES with a view to showing how a heat pump system behaves and how it influences the building occupants' thermal comfort under a DSM strategy designed to flatten the shape of the electricity load curve by switching off the heat pump during peak hours (16:00–19:00). The reference scenario for the analysis was Northern Ireland (UK). The results showed that the heat pump is a good tool for the purposes of DSM, also thanks to the use of TES systems, in particular with heating distribution systems that have a low thermal inertia, e.g. radiators. It proved possible to achieve a good control of the indoor temperature, even if the heat pump was turned off for 3 h, and to reduce the electricity bill if a “time of use” tariff structure was adopted. -- Highlights: ► Heat pump heating systems with thermal energy storage are considered. ► System behavior is investigated during a DSM strategy for reducing peak energy demand. ► Heat pump heating systems demonstrate to be able to have an active role in DSM programs. ► A TES system must be coupled with the heat pump in presence of low thermal inertia heating distribution systems. ► Central role played by incentives schemes to promote this technology

Demand side resource operation on the Irish power system with high wind power penetration

International Nuclear Information System (INIS)

Keane, A.; Tuohy, A.; Meibom, P.; Denny, E.; Flynn, D.; Mullane, A.; O'Malley, M.

2011-01-01

The utilisation of demand side resources is set to increase over the coming years with the advent of advanced metering infrastructure, home area networks and the promotion of increased energy efficiency. Demand side resources are proposed as an energy resource that, through aggregation, can form part of the power system plant mix and contribute to the flexible operation of a power system. A model for demand side resources is proposed here that captures its key characteristics for commitment and dispatch calculations. The model is tested on the all island Irish power system, and the operation of the model is simulated over one year in both a stochastic and deterministic mode, to illustrate the impact of wind and load uncertainty. The results illustrate that demand side resources can contribute to the efficient, flexible operation of systems with high penetrations of wind by replacing some of the functions of conventional peaking plant. Demand side resources are also shown to be capable of improving the reliability of the system, with reserve capability identified as a key requirement in this respect. - Highlights: → Demand side resource model presented for use in unit commitment and dispatch calculations. → Benefits of demand side aggregation demonstrated specifically as a peaking unit and provider of reserve. → Potential to displace or defer construction of conventional peaking units.

Supply-side and demand-side policies for biosimilars: an overview in 10 European member states

OpenAIRE

R?muzat, C?cile; Kapu?niak, Anna; Caban, Aleksandra; Ionescu, Dan; Radi?re, Guerric; Mendoza, Cyril; Toumi, Mondher

2017-01-01

ABSTRACT Objective: This study aimed to provide an overview of biosimilar?policies in 10 EU MSs. Methods: Ten EU MS pharmaceutical markets (Belgium, France, Germany, Greece, Hungary, Italy, Poland, Spain, Sweden, and the UK) were selected. A comprehensive literature review?was performed to identify supply-side and demand-side policies in place in the selected countries. Results: Supply-side policies for biosimilars commonly include price linkage, price re-evaluation, and tendering; the use of...

Directed graph based carbon flow tracing for demand side carbon obligation allocation

DEFF Research Database (Denmark)

Sun, Tao; Feng, Donghan; Ding, Teng

2016-01-01

In order to achieve carbon emission abatement, some researchers and policy makers have cast their focus on demand side carbon abatement potentials. This paper addresses the problem of carbon flow calculation in power systems and carbon obligation allocation at demand side. A directed graph based...... method for tracing carbon flow is proposed. In a lossy network, matrices such as carbon losses, net carbon intensity (NCI) and footprint carbon intensity (FCI) are obtained with the proposed method and used to allocate carbon obligation at demand side. Case studies based on realistic distribution...... and transmission systems are provided to demonstrate the effectiveness of the proposed method....

Simulation of the Demand Side Management impacts: resolution enhancement of the input parameters at the local scale

International Nuclear Information System (INIS)

Imbert, P.

2011-01-01

Following the integrated energy planning paradigm in the 90's and the recent renewal of decentralized energy planning interests, Demand Side Management (DSM) actions are expected to take a significant role on energy planning activities in the future. Indeed the DSM actions represent a relevant option to achieve environmental and energy commitments or to alleviate some specific problems of electricity supply. DSM actions at the local scale at least in the French context is observed today. There is a need for appropriate methods and tools to assess the impacts of such MDE programs at local level. The local scale involves taking into account the specificities of the territories (physical, social, geographical, economical, institutional, etc.) The objective of this thesis is to improve the spatial resolution of input variables for the use in DSM action simulation tools. Based on a case study in France (PREMIO project: smart architecture for load management applied to a district) and an existing simulation tool we will study the impacts of this local experience to several municipalities. (author)

Side Effects (Management)

Science.gov (United States)

... cancer care is relieving side effects, called symptom management, palliative care, or supportive care. It is important ... treat them. To learn about the symptoms and management of the long-term side effects of cancer ...

Predictive Control of Demand Side Units Participating in the Primary Frequency Reserve Market

DEFF Research Database (Denmark)

Biegel, Benjamin; Stoustrup, Jakob; Andersen, Palle

2013-01-01

We consider an aggregator controlling a mixed portfolio of conventional power generators and demand side units. The generators are controllable within certain power and ramp limitations while the demand side units are characterized by flexible consumptions and therefore can be treated as energy...

Hawaii demand-side management resource assessment. Final report, Reference Volume 3 -- Residential and commercial sector DSM analyses: Detailed results from the DBEDT DSM assessment model; Part 1, Technical potential

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-04-01

The Hawaii Demand-Side Management Resource Assessment was the fourth of seven projects in the Hawaii Energy Strategy (HES) program. HES was designed by the Department of Business, Economic Development, and Tourism (DBEDT) to produce an integrated energy strategy for the State of Hawaii. The purpose of Project 4 was to develop a comprehensive assessment of Hawaii`s demand-side management (DSM) resources. To meet this objective, the project was divided into two phases. The first phase included development of a DSM technology database and the identification of Hawaii commercial building characteristics through on-site audits. These Phase 1 products were then used in Phase 2 to identify expected energy impacts from DSM measures in typical residential and commercial buildings in Hawaii. The building energy simulation model DOE-2.1E was utilized to identify the DSM energy impacts. More detailed information on the typical buildings and the DOE-2.1E modeling effort is available in Reference Volume 1, ``Building Prototype Analysis``. In addition to the DOE-2.1E analysis, estimates of residential and commercial sector gas and electric DSM potential for the four counties of Honolulu, Hawaii, Maui, and Kauai through 2014 were forecasted by the new DBEDT DSM Assessment Model. Results from DBEDTs energy forecasting model, ENERGY 2020, were linked with results from DOE-2.1E building energy simulation runs and estimates of DSM measure impacts, costs, lifetime, and anticipated market penetration rates in the DBEDT DSM Model. Through its algorithms, estimates of DSM potential for each forecast year were developed. Using the load shape information from the DOE-2.1E simulation runs, estimates of electric peak demand impacts were developed. Numerous tables and figures illustrating the technical potential for demand-side management are included.

Individual-motivational factors in the acceptability of demand-side and supply-side measures to reduce carbon emissions

International Nuclear Information System (INIS)

Poortinga, Wouter; Spence, Alexa; Demski, Christina; Pidgeon, Nick F.

2012-01-01

As more than a third of all carbon dioxide emissions in the UK are generated by the domestic sector, individuals need to make drastic changes to their current lifestyle in order to play their part in climate change mitigation. Not only do they need to change their personal behaviour, they also have to accept new low-carbon technologies in order to decarbonise the energy they are using. This study uses an adapted version of the Value–Belief-Norm (VBN) model () to examine individual-motivational factors in the acceptability of demand-side and supply-side strategies to reduce carbon emissions. The study found that environmental identity, climate change concern, and personal norms are all significantly associated with the acceptability of both demand-side measures and supply-side technologies. While personal values were also important, their associations were mediated by more specific factors. Overall, the adapted VBN model was better able to explain the acceptability of low-carbon behaviours than of low-carbon energy-supply technologies. Concern about energy security appeared to be of limited importance. It was negatively associated with the willingness to engage in low-carbon behaviours, suggesting that a shift in focus towards energy security issues may not necessarily help a transition to a low-carbon society. - Highlights: ► An adapted VBN model is proposed to study environmentally significant behaviour.► Environmental identity is important for both demand-side and supply-side measures.► Energy security concern is of limited importance to support for supply-side measures.► Energy security concern reduces the willingness to engage in low-carbon behaviours.

Demand side integration aspects in active distribution planning

DEFF Research Database (Denmark)

Silvestro, Federico; Baitch, Alex; Pilo, Fabrizio

2013-01-01

will be implemented in practice? How will regulatory frameworks and connection agreements evolve to support ADSs? The present work provides some information about the closer and closer integration between network planning and Demand Side Integration that is foreseen in the future and shows the necessity to develop...

Definitional-mission report: Demand-side management program for the Tenaga Nasional Berhad in Malaysia. Export trade information

Energy Technology Data Exchange (ETDEWEB)

1992-03-01

A definitional mission evaluated the prospects of the US Trade and Development Program (TDP) funding a market demonstration of a Demand Side Management (DSM) program being developed by the Tenaga Nasional Berhad (TNB) in Malaysia. TNB is the national electric utility of Malaysia with the responsibility to promote economically efficient supply of electricity needed for the economic development of Peninsular Malaysia. DSM is a utility-financed program to affect energy savings at the enduse level thereby reducing peak and base loads. Historically, TNB has taken the peak load and the load duration curves as given in planning and implementing the least-cost generation expansion strategy. It has refrained from influencing the pattern of energy use by the customer through any means other than tariff structures and levels. The experience of many utilities with DSM in the U.S. offers TNB an opportunity to develop a suitable DSM program for Malaysia.

Electric Boiler and Heat Pump Thermo-Electrical Models for Demand Side Management Analysis in Low Voltage Grids

DEFF Research Database (Denmark)

Diaz de Cerio Mendaza, Iker; Bak-Jensen, Birgitte; Chen, Zhe

2013-01-01

The last fifteen years many European countries have integrated large percentage of renewable energy on their electricity generation mix. In Denmark the 21.3% of the electricity consumed nowadays is produced by the wind, and it has planned to be the 50% by 2025. In order to front future challenges...... on the power system control and operation, created by this unstable way of generation, Demand Side Management turns to be a promising solution. The storage capacity from thermo-electric units, like electric boilers and heat pumps, allows operating them with certain freedom. Hence they can be employed under...... certain coordination, to actively respond to the power system fluctuations. The following paper presents two simple thermo-electrical models of an electrical boiler and an air-source CO2 heat pump system. The purpose is using them in low voltage grids analysis to assess their capacity and flexibility...

Energy Refurbishment of an Office Building with Hybrid Photovoltaic System and Demand-Side Management

Directory of Open Access Journals (Sweden)

Giovani Almeida Dávi

2017-08-01

Full Text Available On-site photovoltaic (PV and battery systems intend to improve buildings energy performance, however battery costs and monetary incentives are a major drawback for the introduction of these technologies into the electricity grids. This paper proposes an energy refurbishment of an office building based on multi-objective simulations. An innovative demand-side management approach is analyzed through the PV and battery control with the purpose of reducing grid power peaks and grid imported energy, as well as improving the project economy. Optimization results of load matching and grid interaction parameters, complemented with an economic analysis, are investigated in different scenarios. By means of battery use, the equivalent use of the grid connection is reduced by 12%, enhancing the grid interaction potential, and 10% of load matching rates can be increased. Project improvements indicate the grid connection capacity can be reduced by 13% and significant savings of up to 48% are achieved on yearly bills. The economy demonstrates the grid parity is only achieved for battery costs below 100 €/kWh and the payback period is large: 28 years. In the case with only PV system, the grid parity achieves better outcomes and the payback time is reduced by a half, making this a more attractive option.

Co-optimization of Energy and Demand-Side Reserves in Day-Ahead Electricity Markets

Science.gov (United States)

Surender Reddy, S.; Abhyankar, A. R.; Bijwe, P. R.

2015-04-01

This paper presents a new multi-objective day-ahead market clearing (DAMC) mechanism with demand-side reserves/demand response (DR) offers, considering realistic voltage-dependent load modeling. The paper proposes objectives such as social welfare maximization (SWM) including demand-side reserves, and load served error (LSE) minimization. In this paper, energy and demand-side reserves are cleared simultaneously through co-optimization process. The paper clearly brings out the unsuitability of conventional SWM for DAMC in the presence of voltage-dependent loads, due to reduction of load served (LS). Under such circumstances multi-objective DAMC with DR offers is essential. Multi-objective Strength Pareto Evolutionary Algorithm 2+ (SPEA 2+) has been used to solve the optimization problem. The effectiveness of the proposed scheme is confirmed with results obtained from IEEE 30 bus system.

Dynamics of energy-related CO2 emissions in China during 1980-2002: the relative importance of energy supply-side and demand-side effects

International Nuclear Information System (INIS)

Libo Wu; Kaneko, Shinji; Matsuoka, Shunji

2006-01-01

Based on a newly developed model that integrates energy production, transformation and consumption processes, this paper compares the relative importance of some traditionally recognized factors operating on the energy demand side with a body of newly defined factors on the supply side, in terms of their contribution to trends in China's CO 2 emissions related to the total primary energy supply (C-TPES). Before 1996, changes in China's C-TPES were mainly driven by changes on the energy demand side. Factors operating on the energy supply side played trivial roles. During the period 1996-2000, however, increasing demand-side effects declined dramatically and at the same time decreasing effects from supply side expanded significantly. Such changes resulted directly in a decline in the C-TPES. The decreasing effects from international trade as well as statistical imbalances between supply and demand reinforced the declining trend. The shrinkage of demand side effects mainly arose from the slowdown of economic growth and speed of decrease in energy intensity. The expansion of supply-side effects was principally attributed to the speed of decrease in gross unit consumption in transformation sectors, especially in electricity sector. Therefore, the acceleration of efficiency improvements in end-use and transformation sectors accounted for the decline in the C-TPES over the period 1996-2000. (author)

A sustainable development of a city electrical grid via a non-contractual Demand-Side Management

Science.gov (United States)

Samoylenko, Vladislav O.; Pazderin, Andrew V.

2017-06-01

An increasing energy consumption of large cities as well as an extreme high density of city electrical loads leads to the necessity to search for an alternative approaches to city grid development. The ongoing implementation of the energy accounting tariffs with differentiated rates depending upon the market conditions and changing in a short-term perspective, provide the possibility to use it as a financial incentive base of a Demand-Side Management (DSM). Modern hi-technology energy metering and accounting systems with a large number of functions and consumer feedback are supposed to be the good means of DSM. Existing systems of Smart Metering (SM) billing usually provide general information about consumption curve, bills and compared data, but not the advanced statistics about the correspondence of financial and electric parameters. Also, consumer feedback is usually not fully used. So, the efforts to combine the market principle, Smart Metering and a consumer feedback for an active non-contractual load control are essential. The paper presents the rating-based multi-purpose system of mathematical statistics and algorithms of DSM efficiency estimation useful for both the consumers and the energy companies. The estimation is performed by SM Data processing systems. The system is aimed for load peak shaving and load curve smoothing. It is focused primarily on a retail market support. The system contributes to the energy efficiency and a distribution process improvement by the manual management or by the automated Smart Appliances interaction.

Game Demands of Seven-A-Side Soccer in Young Players.

Science.gov (United States)

Barbero-Alvarez, José C; Gómez-López, Maite; Castagna, Carlo; Barbero-Alvarez, Verónica; Romero, David V; Blanchfield, Anthony W; Nakamura, Fábio Y

2017-07-01

Barbero-Alvarez, JC, Gómez-López, M, Castagna, C, Barbero-Alvarez, V, Romero, DV, Blanchfield, AW, and Nakamura, FY. Game demands of seven-a-side soccer in young players. J Strength Cond Res 31(7): 1771-1779, 2017-The aim of this study was to examine the activity patterns and physiological demands of 7-a-side youth soccer matches across 2 chronological age categories (U12 and U14). Twenty-two soccer players of a national youth soccer academy were investigated. Players of each age category performed 2 training matches (2 × 25 minutes) and were monitored by global positioning system and heart rate monitor units. Players of both categories covered similar total distance (5,348 ± 307 m), at similar mean heart rate values (86 ± 4% of maximum). However, the number of high-intensity runs (82.5 ± 17.4 vs. 69.7 ± 15.2) and total distance covered during sprints (264 ± 207 vs. 128 ± 74 m) were significantly (p ≤ 0.05) higher in U14 compared with U12. The results suggest a highly demanding nature of 7-a-side soccer for skilled players, with physical maturity possibly influencing the match-related high-intensity performance at these ages.

Intelligent Demand Side Management within production systems. Towards Industrial Smart Grids; Intelligente Lastverschiebung in der Produktionstechnik. Ein Weg zum Industrial Smart Grid

Energy Technology Data Exchange (ETDEWEB)

Schriegel, Sebastian; Pethig, Florian; Jasperneite, Juergen [Fraunhofer-Anwendungszentrum Industrial Automation (IOSB-INA), Lemgo (Germany)

2012-07-01

Demand Side Management is a key technology of smart grids. Consumers adjust their energy consumption at current time-volatile energy generation capacity. The currently used energy consumption optimizations, such as the use of energy efficient actuators, pause functions and peak load management should be supplemented by a dynamic real-time energy management. For industrial consumers, such an energy management may be established at various levels of the automation pyramid. On plant level energy optimization is based on predictions, on control and field level optimization is based on process variables. The taxonomy of potential energy optimization differentiates between organizational, synchronization and single parameter optimization. This potential can be exploited with intelligent control technology based on qualified process models and tunable control programs. An Industrial Smart Grid results by interlinking the former mentioned intelligent control technologies with the plant infrastructure and thereby provides an optimal energy consumption behavior and a perfect integration into and interaction with the smart grid. (orig.)

Impact of Demand Side Response on a Commercial Retail Refrigeration System

Directory of Open Access Journals (Sweden)

Ibrahim M. Saleh

2018-02-01

Full Text Available The UK National Grid has placed increased emphasis on the development of Demand Side Response (DSR tariff mechanisms to manage load at peak times. Refrigeration systems, along with HVAC, are estimated to consume 14% of the UK’s electricity and could have a significant role for DSR application. However, characterized by relatively low individual electrical loads and massive asset numbers, multiple low power refrigerators need aggregation for inclusion in these tariffs. In this paper, the impact of the Demand Side Response (DSR control mechanisms on food retailing refrigeration systems is investigated. The experiments are conducted in a test-rig built to resemble a typical small supermarket store. The paper demonstrates how the temperature and pressure profiles of the system, the active power and the drawn current of the compressors are affected following a rapid shut down and subsequent return to normal operation as a response to a DSR event. Moreover, risks and challenges associated with primary and secondary Firm Frequency Response (FFR mechanisms, where the load is rapidly shed at high speed in response to changes in grid frequency, is considered. For instance, measurements are included that show a significant increase in peak inrush currents of approx. 30% when the system returns to normal operation at the end of a DSR event. Consideration of how high inrush currents after a DSR event can produce voltage fluctuations of the supply and we assess risks to the local power supply system.

A semi-distributed electric demand-side management system with PV generation for self-consumption enhancement

International Nuclear Information System (INIS)

Castillo-Cagigal, M.; Gutierrez, A.; Monasterio-Huelin, F.; Caamano-Martin, E.; Masa, D.; Jimenez-Leube, J.

2011-01-01

Highlights: → We have developed a DSM system with PV electricity and battery storage. → To implement the DSM system, we have developed a modular architecture. → Simulations and real experiments have been executed for different weather conditions. → The use of theses technologies increase the self-consumed energy. -- Abstract: This paper presents the operation of an Electrical Demand-Side Management (EDSM) system in a real solar house. The use of EDSM is one of the most important action lines to improve the grid electrical efficiency. The combination between the EDSM and the PV generation performs a new control level in the local electric behavior and allows new energy possibilities. The solar house used as test-bed for the EDSM system owns a PV generator, a lead-acid battery storage system and a grid connection. The electrical appliances are controllable from an embedded computer. The EDSM is implemented by a control system which schedules the tasks commanded by the user. By using the control system, we define the house energy policy and improve the energy behavior with regard to a selected energy criterion, self-consumption. The EDSM system favors self-consumption with regard to a standard user behavior and reduces the energy load from the grid.

A scoping study: demand side measures on the UK electrical system

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-07-01

The study is intended to eventually bring about a number of improvements in the UK electrical system, particularly in regard to Demand Side Management (DSM). Among the benefits envisaged are (a) increased security of supply when the network is under stress; (b) reduction in costs; (c) simpler outage management; (d) carbon saving and (e) increased energy efficiency. So far, these potential benefits have attracted little attention in the residential and small business sectors of the market: suggested reasons for this are listed. Taking into account the experience of other countries, three options are presented for a UK DSM programme: they are (i) customer initiated; (ii) supplier initiated and (iii) distributor initiated. At present, all the suggested options need further study and to aid the development for small customers, five possible initiatives are suggested. This final report (95 pages) includes a detailed description of the research required and a tender process for a customer-initiated programme. The report was prepared by KEMA Limited under contract to the DTI.

A scoping study: demand side measures on the UK electrical system

International Nuclear Information System (INIS)

2005-01-01

The study is intended to eventually bring about a number of improvements in the UK electrical system, particularly in regard to Demand Side Management (DSM). Among the benefits envisaged are (a) increased security of supply when the network is under stress; (b) reduction in costs; (c) simpler outage management; (d) carbon saving and (e) increased energy efficiency. So far, these potential benefits have attracted little attention in the residential and small business sectors of the market: suggested reasons for this are listed. Taking into account the experience of other countries, three options are presented for a UK DSM programme: they are (i) customer initiated; (ii) supplier initiated and (iii) distributor initiated. At present, all the suggested options need further study and to aid the development for small customers, five possible initiatives are suggested. This final report (95 pages) includes a detailed description of the research required and a tender process for a customer-initiated programme. The report was prepared by KEMA Limited under contract to the DTI

An analysis of the factors influencing demand-side management activity in the electric utility industry

Science.gov (United States)

Bock, Mark Joseph

Demand-side management (DSM), defined as the "planning, implementation, and monitoring of utility activities designed to encourage consumers to modify their pattern of electricity usage, including the timing and level of electricity demand," is a relatively new concept in the U.S. electric power industry. Nevertheless, in twenty years since it was first introduced, utility expenditures on DSM programs, as well as the number of such programs, have grown rapidly. At first glance, it may seem peculiar that a firm would actively attempt to reduce demand for its primary product. There are two primary explanations as to why a utility might pursue DSM: regulatory mandate, and self-interest. The purpose of this dissertation is to determine the impact these influences have on the amount of DSM undertaken by utilities. This research is important for two reasons. First, it provides insight into whether DSM will continue to exist as competition becomes more prevalent in the industry. Secondly, it is important because no one has taken a comprehensive look at firm-level DSM activity on an industry-wide basis. The primary data set used in this dissertation is the U.S. Department of Energy's Annual Electric Utility Report, Form EIA-861, which represents the most comprehensive data set available for analyzing DSM activity in the U.S. There are four measures of DSM activity in this data set: (1) utility expenditures on DSM programs; (2) energy savings by DSM program participants; and (3) the actual and (4) the potential reductions in peak load resulting from utility DSM measures. Each is used as the dependent variable in an econometric analysis where independent variables include various utility characteristics, regulatory characteristics, and service territory and customer characteristics. In general, the results from the econometric analysis suggest that in 1993, DSM activity was primarily the result of regulatory pressure. All of the evidence suggests that if DSM continues to

The Demand Side in Economic Models of Energy Markets: The Challenge of Representing Consumer Behavior

Energy Technology Data Exchange (ETDEWEB)

Krysiak, Frank C., E-mail: frank.krysiak@unibas.ch; Weigt, Hannes [Department of Business and Economics, University of Basel, Basel (Switzerland)

2015-05-19

Energy models play an increasing role in the ongoing energy transition processes either as tools for forecasting potential developments or for assessments of policy and market design options. In recent years, these models have increased in scope and scale and provide a reasonable representation of the energy supply side, technological aspects and general macroeconomic interactions. However, the representation of the demand side and consumer behavior has remained rather simplistic. The objective of this paper is twofold. First, we review existing large-scale energy model approaches, namely bottom-up and top-down models, with respect to their demand-side representation. Second, we identify gaps in existing approaches and draft potential pathways to account for a more detailed demand-side and behavior representation in energy modeling.

The Demand Side in Economic Models of Energy Markets: The Challenge of Representing Consumer Behavior

Directory of Open Access Journals (Sweden)

Frank eKrysiak

2015-05-01

Full Text Available Energy models play an increasing role in the ongoing energy transition processes either as tools for forecasting potential developments or for assessments of policy and market design options. In recent years these models have increased in scope and scale and provide a reasonable representation of the energy supply side, technological aspects and general macroeconomic interactions. However, the representation of the demand side and consumer behavior has remained rather simplistic. The objective of this paper is twofold. First, we review existing large scale energy model approaches, namely bottom-up and top-down models, with respect to their demand side representation. Second, we identify gaps in existing approaches and draft potential pathways to account for a more detailed demand side and behavior representation in energy modeling.

The Demand Side in Economic Models of Energy Markets: The Challenge of Representing Consumer Behavior

International Nuclear Information System (INIS)

Krysiak, Frank C.; Weigt, Hannes

2015-01-01

Energy models play an increasing role in the ongoing energy transition processes either as tools for forecasting potential developments or for assessments of policy and market design options. In recent years, these models have increased in scope and scale and provide a reasonable representation of the energy supply side, technological aspects and general macroeconomic interactions. However, the representation of the demand side and consumer behavior has remained rather simplistic. The objective of this paper is twofold. First, we review existing large-scale energy model approaches, namely bottom-up and top-down models, with respect to their demand-side representation. Second, we identify gaps in existing approaches and draft potential pathways to account for a more detailed demand-side and behavior representation in energy modeling.

Joint Planning Of Energy Storage and Transmission Considering Wind-Storage Combined System and Demand Side Response

Science.gov (United States)

Huang, Y.; Liu, B. Z.; Wang, K. Y.; Ai, X.

2017-12-01

In response to the new requirements of the operation mode of wind-storage combined system and demand side response for transmission network planning, this paper presents a joint planning of energy storage and transmission considering wind-storage combined system and demand side response. Firstly, the charge-discharge strategy of energy storage system equipped at the outlet of wind farm and demand side response strategy are analysed to achieve the best comprehensive benefits through the coordination of the two. Secondly, in the general transmission network planning model with wind power, both energy storage cost and demand side response cost are added to the objective function. Not only energy storage operation constraints and but also demand side response constraints are introduced into the constraint condition. Based on the classical formulation of TEP, a new formulation is developed considering the simultaneous addition of the charge-discharge strategy of energy storage system equipped at the outlet of the wind farm and demand side response strategy, which belongs to a typical mixed integer linear programming model that can be solved by mature optimization software. The case study based on the Garver-6 bus system shows that the validity of the proposed model is verified by comparison with general transmission network planning model. Furthermore, the results demonstrate that the joint planning model can gain more economic benefits through setting up different cases.

Methodology for the analysis and characterization of the demand side energy resources; Metodologia para analise e caracterizacao dos recursos energeticos do lado da demanda

Energy Technology Data Exchange (ETDEWEB)

Baitelo, Ricardo Lacerda; Udaeta, Miguel Edgar Morales [Universidade de Sao Paulo (USP), SP (Brazil). Dept. de Energia e Automacao Eletricas. Grupo de Energia; Burani, Geraldo Francisco; Grimoni, Jose Aquiles Baesso [Universidade de Sao Paulo (USP), SP (Brazil). Inst. de Energia e Eletrotecnica

2006-07-01

This abstract aims at describing briefly a model for the assessment of demand side energy resources This model intends to comprehend every kind of action and measure related to demand side management and energy conservation, evaluating them in a holistic way, into four dimensions: technical-economical, environmental, social and political. Different aspects regarding the resources are also accounted, such as energetic potentials (theoretical, accomplishable and economic). At last, scenarios concerning the introduction of evaluated resources through a period of time are elaborated. (author)

Economic and environmental impacts from the implementation of an intelligent demand side management system at the European level

International Nuclear Information System (INIS)

Papagiannis, G.; Dagoumas, A.; Lettas, N.; Dokopoulos, P.

2008-01-01

This paper presents the results of an analysis on the economic and environmental impacts of the application of an intelligent demand side management system, called the Energy Consumption Management System (ECMS), in the European countries. The ECMS can be applied for the control of individual, widely distributed electric loads, using the power distribution network as the command communication channel. The system can be applied in public lighting, in the tertiary and residential sectors, as well as in the industry. A top-down analysis investigates the possible penetration levels in each application area. The long-term impacts following the application of system are evaluated using the LEAP2006 platform. The WASP IV model is also used for the optimization of the power generation expansion and the corresponding calibration of LEAP2006. Several operational strategies combining variable market penetration of the ECMS and expected energy savings are examined. Results show that, under a logical market penetration, a reduction of 1-4% in primary energy, of 1.5-5% in CO 2 emissions and a 2-8% saving in investment costs for power generation expansion is to be expected for the EU-15. The results also justify that innovative devices may be attractive to end users and also help in the implementation of global energy-saving policies

Demand side resource operation on the Irish power system with high wind power penetration

DEFF Research Database (Denmark)

Keane, A.; Tuohy, A.; Meibom, Peter

2011-01-01

part of the power system plant mix and contribute to the flexible operation of a power system. A model for demand side resources is proposed here that captures its key characteristics for commitment and dispatch calculations. The model is tested on the all island Irish power system, and the operation...... of the functions of conventional peaking plant. Demand side resources are also shown to be capable of improving the reliability of the system, with reserve capability identified as a key requirement in this respect....... of the model is simulated over one year in both a stochastic and deterministic mode, to illustrate the impact of wind and load uncertainty. The results illustrate that demand side resources can contribute to the efficient, flexible operation of systems with high penetrations of wind by replacing some...

How to introduce demand side resources in the design of low-carbon power systems in China

Science.gov (United States)

Zhou, Pengcheng; Liu, Yiqun; Zeng, Ming; Sun, Chenjun

2018-04-01

Nowadays, China's energy demand sustained rapid growth, and the coal-based energy structure has adverse effects on the environment. The flexibility of demand side resource (DSR) will be greatly improved, and DSR can reduce electricity consumption actively and temporarily, and realize energy saving and emission reduction. But there are still some problems to introduce DSR in China. This paper proposes three practices for introducing demand side resources to improve the flexibility of power systems through demand resources.

Mining residential water and electricity demand data in Southern California to inform demand management strategies

Science.gov (United States)

Cominola, A.; Spang, E. S.; Giuliani, M.; Castelletti, A.; Loge, F. J.; Lund, J. R.

2016-12-01

Demand side management strategies are key to meet future water and energy demands in urban contexts, promote water and energy efficiency in the residential sector, provide customized services and communications to consumers, and reduce utilities' costs. Smart metering technologies allow gathering high temporal and spatial resolution water and energy consumption data and support the development of data-driven models of consumers' behavior. Modelling and predicting resource consumption behavior is essential to inform demand management. Yet, analyzing big, smart metered, databases requires proper data mining and modelling techniques, in order to extract useful information supporting decision makers to spot end uses towards which water and energy efficiency or conservation efforts should be prioritized. In this study, we consider the following research questions: (i) how is it possible to extract representative consumers' personalities out of big smart metered water and energy data? (ii) are residential water and energy consumption profiles interconnected? (iii) Can we design customized water and energy demand management strategies based on the knowledge of water- energy demand profiles and other user-specific psychographic information? To address the above research questions, we contribute a data-driven approach to identify and model routines in water and energy consumers' behavior. We propose a novel customer segmentation procedure based on data-mining techniques. Our procedure consists of three steps: (i) extraction of typical water-energy consumption profiles for each household, (ii) profiles clustering based on their similarity, and (iii) evaluation of the influence of candidate explanatory variables on the identified clusters. The approach is tested onto a dataset of smart metered water and energy consumption data from over 1000 households in South California. Our methodology allows identifying heterogeneous groups of consumers from the studied sample, as well as

An Algorithmic Game Approach for Demand Side Management in Smart Grid with Distributed Renewable Power Generation and Storage

Directory of Open Access Journals (Sweden)

Ren-Shiou Liu

2016-08-01

Full Text Available In this paper, the problem of minimizing electricity cost and the peak system load in smart grids with distributed renewable energy resources is studied. Unlike prior research works that either assume all of the jobs are interruptible or power-shiftable, this paper focuses on more challenging scenarios in which jobs are non-interruptible and non-power-shiftable. In addition, as more and more newly-built homes have rooftop solar arrays, it is assumed that all users are equipped with a solar-plus-battery system in this paper. Thus, power can be drawn from the battery as needed to reduce the cost of electricity or to lower the overall system load. With a quadratic load-dependent cost function, this paper first shows that the electricity cost minimization problem in such a setting is NP-hard and presents a distributed demand-side management algorithm, called DDSM, to solve this. Experimental results show that the proposed DDSM algorithm is effective, scalable and converges to a Nash equilibrium in finite rounds.

Model Predictive Controller for Active Demand Side Management with PV Self-consumption in an Intelligent Building

DEFF Research Database (Denmark)

Zong, Yi; Mihet-Popa, Lucian; Kullmann, Daniel

2012-01-01

This paper presents a Model Predictive Controller (MPC) for electrical heaters’ predictive power consumption including maximizing the use of local generation (e.g. solar power) in an intelligent building. The MPC is based on dynamic power price and weather forecast, considering users’ comfort...... settings to meet an optimization objective such as minimum cost and minimum reference temperature error. It demonstrates that this MPC strategy can realize load shifting, and maximize the PV self-consumption in the residential sector. With this demand side control study, it is expected that MPC strategy...

An Auto Tuning Substation Peak Shaving Controller for Congestion Management Using Flexible Demand

DEFF Research Database (Denmark)

Sossan, Fabrizio; Marinelli, Mattia

2013-01-01

A closed loop substation peak shaving/congestion management controller for radial distribution networks is presented. The controller it uses an individual control signal in order to shift the consumption of a population of demand side resources, DSRs. The controller auto tunes its parameters on...

Utilizing a programmatic focus on energy efficiency and customer feedback to improve the effectiveness of demand side management

International Nuclear Information System (INIS)

Smith, S.; Tharp, A.

2006-01-01

A project to encourage effective demand side management (DSM) programs through price-responsive load management was presented. The project was conducted through literature searches, surveys of utility programs and interviews with experts. National security, environmental awareness and economic factors were identified as the primary drivers for DSM. A overview of DSM strategies included details of: price responsive programs; power buyback; direct load control; and conservation-based rebates. Target sectors for DSM programs were divided into 4 sectors: (1) residential; (2) agricultural; (3) commercial/industrial; and (4) institutional. A customer decision cycle for DSM was presented, and various programs were evaluated. A comparison between DR and energy efficiency programs in the United States suggested that an increased focus on energy efficiency will benefit DR programs. However, perception of risk due to pricing exposure and the potential for loss of comfort are significant barriers to effective DSM. Studies have shown that DSM is most effective when participants receive direct feedback on consumption. Simple mechanisms for alerting participants of peak periods were recommended, as well as disaggregation tools to highlight areas of high energy usage and spotlight corrective measures. National and regional coordination of DSM activities was also recommended. It was concluded that DSM programs are successful when both customers and suppliers have an equal stake in their success. refs., tabs., figs

Linking meters and markets: Roles and incentives to support a flexible demand side

DEFF Research Database (Denmark)

Katz, Jonas

2014-01-01

wholesale market participants to the demand side is mostly infeasible, resulting in flexibility tasks being aggregated and delegated to balancing responsible wholesale traders. This analysis focuses on whether current incentives and roles are appropriate and where the design could be improved to establish......Present trends in the development of electricity systems are expected to generate a growing need for flexibility in decentralised resources, including demand response. In order to enable decentralised actors to create value, the organisation of markets and incentives should incorporate these new...... a flexible demand side with a particular focus on the Danish case. Design-related barriers are identified that affect expected value, associated risks, and the distribution of responsibilities. This serves as a basis to define policy options in the context of Nordic electricity markets. © 2014 Elsevier Ltd...

On the importance of the supply side in demand-side management

International Nuclear Information System (INIS)

Fischer, Carolyn

2005-01-01

We discuss how the structure of market supply affects the evaluation of policies to promote energy efficiency in household appliances. If competitive markets offer the levels that consumers demand, product standards inefficiently restrict choice. If suppliers price discriminate, minimum standards can restrict the inefficient use of energy intensity to segment consumers. We also compare the effects of average intensity standards, energy prices and innovation, and consider what the different behavioral predictions imply for empirical studies of energy efficiency. Good policymaking requires knowing not only how consumers value energy efficiency in their decision-making, but also how producers respond to those values

On the importance of the supply side in demand-side management

International Nuclear Information System (INIS)

Fischer, C.

2005-01-01

We discuss how the structure of market supply affects the evaluation of policies to promote energy efficiency in household appliances. If competitive markets offer the levels that consumers demand, product standards inefficiently restrict choice. If suppliers price discriminate, minimum standards can restrict the inefficient use of energy intensity to segment consumers. We also compare the effects of average intensity standards, energy prices and innovation, and consider what the different behavioral predictions imply for empirical studies of energy efficiency. Good policy making requires knowing not only how consumers value energy efficiency in their decision-making, but also how producers respond to those values. (author)

Water demand management in Mediterranean regions

OpenAIRE

Giulio Querini; Salvo Creaco

2005-01-01

Water sustainability needs a balance between demand and availability: 1) Water demand management: demand may be managed by suppliers and regulations responsible persons, using measures like invoicing, consumptions measurement and users education in water conservation measures; 2) Augmentation of water supply: availibility may be augmented by infrastructural measures, waste water reuse, non-conventional resources and losses reduction. Water Demand Management is about achieving a reduction in t...

CONTRIBUTIONS TO KNOWLEDGE OF SOME MORPHOLOGICAL FEATURES IN YOUNG SOWS BRED IN FARMSTEADS ON CLUJ COUNTY INCIDENCE

Directory of Open Access Journals (Sweden)

I. CORNOIU

2007-10-01

Full Text Available The present study tries to offer some information concerning the morphological stateof Bazna Breed female suina biological material bred and kept in farmsteads onCluj County incidence, near to enter to reproduce for the first time.Practically, after a biometric synthetic check, 37 young sows were phenotypicallyanalyzed, considered as acceptable to reproduction by the breeders.The obtained results were statistically processed and the formulated conclusionswant to be modest recommendations for suina breeders in general, and for Baznabreed in special.

Demand side management in South Africa at industrial residence water heating systems using in line water heating methodology

International Nuclear Information System (INIS)

Rankin, R.; Rousseau, P.G.

2008-01-01

The South African electrical utility, ESKOM, currently focuses its demand side management (DSM) initiatives on controlling electrical load between 18:00 and 20:00 each day, which is the utility's peak demand period. Funding is provided to energy service companies (ESCo's) to implement projects that can achieve load shifting out of this period. This paper describes how an improved in line water heating concept developed in previous studies was implemented into several real life industrial sanitary water heating systems to obtain the DSM load shift required by ESKOM. Measurements from a selection of these plants are provided to illustrate the significant load reductions that are being achieved during 18:00-20:00. The measured results also show that the peak load reduction is achieved without adversely affecting the availability of sufficient hot water to the persons using the showering and washing facilities served by the water heating system. A very good correlation also exists between these measured results and simulations that were done beforehand to predict the DSM potential of the project. The in line water heater concept provides an improved solution for DSM at sanitary water heating systems due to the stratified manner in which hot water is supplied to the tanks. This provides an improved hot water supply to users when compared to conventional in tank heating systems, even with load shifting being done. It also improves the storage efficiency of a plant, thereby allowing the available storage capacity of a plant to be utilized to its full extent for load shifting purposes

Production of farmstead lactose-free Pecorino di Osilo and ricotta cheeses from sheep’s milk

Directory of Open Access Journals (Sweden)

Luisa Pulinas

2017-02-01

Full Text Available The present work was aimed to define and validate farmstead production of lactose- free Pecorino di Osilo cheese, fresh ricotta cheese, and salted and smoked ricotta cheese (Ricotta mustia. The enzymatic activity of the commercial preparation containing lactase (1.1 g/mL, preliminarily tested using a spectrophotometric titration, showed activity equal to 4950±40 neutral lactase unit/g. The amount of lactase required to obtain the lactose-free milk was then established in triplicate laboratory trials, by adding the enzyme at concentrations of 0.7, 0.9 and 1.1 g/L in flasks containing 160 mL of raw sheep’s milk. Samples were incubated under conditions expected during milk storage and cheese-making. The residual lactose content in milk was determined by enzymatic method. The addition of lactase at concentration of 1.1 g/L of milk reduced the lactose concentration below the limit of detection (LOD of 0.06 g/L. The procedure was validated at a dairy farm, using three different batches of bulk raw sheep’s lactose-free milk that were transformed into Pecorino di Osilo cheese. The resulting whey was used to produce fresh ricotta and Ricotta mustia cheese. Raw milk and whey samples were always below lactose detection limit. The residual lactose was measured in Pecorino di Osilo cheese, after 24 hours and 30 days from production; in fresh ricotta cheese, after 48 hours; in Ricotta mustia cheese after 7 days. The determination of lactose content in cheese samples was conducted by a gas chromatography- flame ionization detection method, which showed a LOD and limit of quantification respectively of 1.8 and 5.6 mg/kg for cheese, and 1.35 and 4.2 mg/kg for both ricotta cheeses. The lactose concentration was always below the relevant LOD values in all samples. The mean concentration of galactose and glucose were respectively 13,000±2000 and 11,000±2000 mg/kg in fresh Pecorino di Osilo, 1100±300 and 1200±300 mg/kg in fresh ricotta, and 950±400 and 750

Survey of Models on Demand, Customer Base-Line and Demand Response and Their Relationships in the Power Market

OpenAIRE

Heshmati, Almas

2012-01-01

The increasing use of demand-side management as a tool to reliably meet electricity demand at peak time has stimulated interest among researchers, consumers and producer organizations, managers, regulators and policymakers, This research reviews the growing literature on models used to study demand, consumer baseline (CBL) and demand response in the electricity market. After characterizing the general demand models, it reviews consumer baseline based on which further study the demand response...

A Simulation of Rainwater Harvesting Design and Demand-Side Controls for Large Hospitals

Directory of Open Access Journals (Sweden)

Lawrence V. Fulton

2018-05-01

Full Text Available Inpatient health buildings in the United States are the most intensive users of water among large commercial buildings. Large facilities (greater than 1 million square feet consume an average of 90 million gallons per building per year. The distribution and treatment of water imposes a significant electrical power demand, which may be the single largest energy requirement for various states. Supply and demand-side solutions are needed, particularly in arid and semi-arid regions where water is scarce. This study uses continuous simulations based on 71 years of historical data to estimate how rainwater harvesting systems and demand-side interventions (e.g., low-flow devices, xeriscaping would offset the demand for externally-provided water sources in a semi-arid region. Simulations from time series models are used to generate alternative rainfall models to account for potential non-stationarity and volatility. Results demonstrate that hospital external water consumption might be reduced by approximately 25% using conservative assumptions and depending on the design of experiment parameters associated with rainfall capture area, building size, holding tank specifications, and conservation efforts.

Demand side management—A simulation of household behavior under variable prices

International Nuclear Information System (INIS)

Gottwalt, Sebastian; Ketter, Wolfgang; Block, Carsten; Collins, John; Weinhardt, Christof

2011-01-01

Within the next years, consumer households will be increasingly equipped with smart metering and intelligent appliances. These technologies are the basis for households to better monitor electricity consumption and to actively control loads in private homes. Demand side management (DSM) can be adopted to private households. We present a simulation model that generates household load profiles under flat tariffs and simulates changes in these profiles when households are equipped with smart appliances and face time-based electricity prices. We investigate the impact of smart appliances and variable prices on electricity bills of a household. We show that for households the savings from equipping them with smart appliances are moderate compared to the required investment. This finding is quite robust with respect to variation of tariff price spreads and to different types of appliance utilization patterns. Finally, our results indicate that electric utilities may face new demand peaks when day-ahead hourly prices are applied. However, a considerable amount of residential load is available for shifting, which is interesting for the utilities to balance demand and supply. - Highlights: ► Our model generates residential load profiles that are based on real world data. ► We simulate changes in load profiles when smart appliances and time-of-use tariffs are applied. ► The economic incentive for households to invest in smart appliances is low. ► Time-of-use tariffs create new, even higher peaks. ► Electric utilities have a large amount of the hourly load available for shifting.

An Efficient Demand Side Management System with a New Optimized Home Energy Management Controller in Smart Grid

Directory of Open Access Journals (Sweden)

Hafiz Majid Hussain

2018-01-01

Full Text Available The traditional power grid is inadequate to overcome modern day challenges. As the modern era demands the traditional power grid to be more reliable, resilient, and cost-effective, the concept of smart grid evolves and various methods have been developed to overcome these demands which make the smart grid superior over the traditional power grid. One of the essential components of the smart grid, home energy management system (HEMS enhances the energy efficiency of electricity infrastructure in a residential area. In this aspect, we propose an efficient home energy management controller (EHEMC based on genetic harmony search algorithm (GHSA to reduce electricity expense, peak to average ratio (PAR, and maximize user comfort. We consider EHEMC for a single home and multiple homes with real-time electricity pricing (RTEP and critical peak pricing (CPP tariffs. In particular, for multiple homes, we classify modes of operation for the appliances according to their energy consumption with varying operation time slots. The constrained optimization problem is solved using heuristic algorithms: wind-driven optimization (WDO, harmony search algorithm (HSA, genetic algorithm (GA, and proposed algorithm GHSA. The proposed algorithm GHSA shows higher search efficiency and dynamic capability to attain optimal solutions as compared to existing algorithms. Simulation results also show that the proposed algorithm GHSA outperforms the existing algorithms in terms of reduction in electricity cost, PAR, and maximize user comfort.

Grey-box Modelling of a Household Refrigeration Unit Using Time Series Data in Application to Demand Side Management

DEFF Research Database (Denmark)

Sossan, Fabrizio; Lakshmanan, Venkatachalam; Costanzo, Giuseppe Tommaso

2016-01-01

This paper describes the application of stochastic grey-box modeling to identify electrical power consumption-to-temperature models of a domestic freezer using experimental measurements. The models are formulated using stochastic differential equations (SDEs), estimated by maximum likelihood......) to shift the electricity consumption of a freezer in demand response experiments, thereby addressing the model selection problem also from the application point of view and showing in an experimental context the ability of MPC to exploit the freezer as a demand side resource (DSR)....... estimation (MLE), validated through the model residuals analysis and cross-validated to detect model over-fitting. A nonlinear model based on the reversed Carnot cycle is also presented and included in the modeling performance analysis. As an application of the models, we apply model predictive control (MPC...

THE TECHNOLOGY ASSESSMENT OF DEMAND SIDE BIDDING IN THE SOUTH AFRICAN CONTEXT*

Directory of Open Access Journals (Sweden)

H.K. Grover

2012-01-01

Full Text Available

ENGLISH ABSTRACT:South Africa is currently in the grip of a severe power supply capacity constraint. January 2007 saw blackouts throughout the country, and worse was expected in the months to come. As a measure of immediate remedy Eskom has turned to demand side bidding (DSB, a methodology whereby the demand side has an opportunity to sell back flexible load to the supply side. This paper assesses DSB with the aim of evaluating and gauging the current and potential future standing of DSB as a technology product within the South African context.

AFRIKAANSE OPSOMMING: Suid-Afrika ervaar tans ’n ernstige vraagstuk in elektrisiteitsvoorsiening. Vanaf Januarie 2007 kom gereelde kragonderbrekings voor, en volgens alle aanduidings lê die ergste nog voor. As ’n korttermynmaatreël beoog ESKOM ’n strategie van aanvraagbestuur en spesifiek aanvraag-bie, ’n metodologie waarvolgens verbruikers die geleentheid kry om elektrisiteit aan die verskaffer terug te verkoop. Hierdie artikel assesseer die metodologie ten einde die huidige en toekomstige gebruikersmoontlikhede daarvan as ’n tegnologieproduk binne Suid-Afrikaanse konteks te bepaal.

Research on Simulation Requirements and Business Architecture of Automated Demand Response in Power Sales Side Market Liberalization

Science.gov (United States)

Liu, Yiqun; Zhou, Pengcheng; Zeng, Ming; Chen, Songsong

2018-01-01

With the gradual reform of the electricity market, the power sale side liberalization has become the focus of attention as the key task of reform. The open power market provides a good environment for DR (Demand Response). It is of great significance to research the simulation requirements and business architecture of ADR (Automatic Demand Response) in power sale side market liberalization. Firstly, this paper analyzes the simulation requirements of ADR. Secondly, it analyzes the influence factors that the business development of ADR from five aspects after power sale side market liberalization. Finally, Based on ADR technology support system, the business architecture of ADR after power sale side market liberalization is constructed.

Demand Side Management in a competitive European market: Who should be responsible for its implementation?

International Nuclear Information System (INIS)

Didden, Marcel H.; D'Haeseleer, William D.

2003-01-01

Demand side management (DSM), more specifically energy efficiency, is standing in the spotlight due to the Kyoto commitments. An additional factor, the liberalization of the electricity markets, causes every country to review its own DSM activities. Especially in Europe, where the directive for opening the electricity market has a direct impact on the current DSM frameworks, governments will have to consider a change in this framework. In order to achieve this, much research has been done in the past years on how to change the DSM framework in a way that the requirements of both liberalization and the Kyoto Protocol will be met. In this paper, we review the current DSM activities and ongoing research from the starting point 'who should be responsible for implementing DSM'. We conclude that countries have to make explicit choices on how to arrange their DSM activities for the different customers groups. They have to be aware of the fact that some combinations of DSM activities will lead to counter-productive results and therefore inefficiency. This paper also investigates which of these DSM activities fits best in the open market; a critical review of Integrated Resource Planning (IRP) is used as a starting point. We agree with various proponents of IRP that planning towards minimal societal costs is theoretically appropriate, looking from a societal point of view. We also indicate in this paper that the planning process IRP is partly applicable in the open market. But looking at the practical application of IRP in the past, we must conclude that there are better alternatives for achieving energy efficient goals in a liberalized market

The Demand Side Response to Multi-zone Tariffs. Consumer Test Results

Directory of Open Access Journals (Sweden)

Adam Olszewski

2015-12-01

Full Text Available Advanced Metering Infrastructure (AMI is a technologically advanced solution currently implemented by the most innovative distribution system operators. ENERGA-OPERATOR SA set about preparing for smart metering implementation in 2010. So far the company has installed over 400,000 meters in its area, and plans to install a further 450,000 in 2015. Kalisz, the first fully AMI-covered city in Poland, was chosen for an in-depth analysis of the system. In particular, a consumer test was conducted there with the intention of answering the question about the strength of the demand side response to multi-zone tariffs and power reduction. Conclusions from the year-long test show the demand side response to multi-zone tariffs – i.e. the maximum temporary percentage reduction of energy consumption in the time zone with the tariff raised by a min. of 80% – stays within the 5–15% range. In the case of power reduction (the maximum temporary reduction of energy consumption in the time zone when the power available to a household is limited to 1 kW – the demand side response stays within the 10–30% range. An additional effect of tariff diversification and smart metering is a reduction in electricity consumption by 1–4% on working days (i.e. this is the effect of either the consumption reduction or shifting it to weekends. During the test energy consumers were subjected to both price incentives and education. Due to the fact that it is difficult to separate the effects of education and tariff structures, the company plans to continue the research related to verifying the effectiveness of individual activation tools in reducing electricity consumption by households.

Renewable generation and demand response integration in micro-grids. Development of a new energy management and control system

Energy Technology Data Exchange (ETDEWEB)

Alvarez-Bel, C.; Escriva-Escriva, G.; Alcazar-Ortega, M. [Institute for Energy Engineering, Universitat Politecnica de Valencia, Valencia (Spain)

2013-11-15

The aim of this research resides in the development of an energy management and control system to control a micro-grid based on the use of renewable generation and demand resources to introduce the application of demand response concepts to the management of micro-grids in order to effectively integrate the demand side as an operation resource for the grid and improve energy efficiency of the elements. As an additional result, the evaluation of reductions in the total amount of CO2 emitted into the atmosphere due to the improvement of the energy efficiency of the system is assessed.

Novel algorithm for aggregated demand response strategy for smart distribution network

NARCIS (Netherlands)

Babar, M.; Ahamed, I.; Shah, A.; Al-Ammar, E.A.; Malik, N.H.

2013-01-01

Advancement in demand side management strategies enables smart grid to cope with the ever increasing energy demand and provide economic benefit to all of it's stakeholders. Moreover, emerging concept of smart pricing and advances in load control can provide new business opportunities for demand side

Demonstration project: Load management on the user side at power shortages

International Nuclear Information System (INIS)

Lindskoug, Stefan

2005-10-01

The risk for power shortages during extreme cold weather has increased in Sweden. Comments are made that high electricity spot prices are important for holding down the demand. Through the consumers' higher price sensitivity, the electricity system can be operated with lower reserve capacity. The objective of the demonstration project is to show methods for reducing the electricity demand at the national level at high spot prices. An important prerequisite is that the measures must be profitable for all parties involved. Four separate studies were made, two concerning households, one industry and one for the district heating sector. The conclusion from the studies is that load management on the customer's side is an economic alternative to investment in new production capacity

Simple models of district heating systems for load and demand side management and operational optimisation; Simple modeller for fjernvarmesystemer med henblik pae belastningsudjaevning og driftsoptimering

Energy Technology Data Exchange (ETDEWEB)

Boehm, B. [Technical Univ. of Denmark, Dept. of Mechanical Engineering, Kgs. Lyngby (Denmark); Larsen, H.V. [Risoe National Lab., System Analysis Dept., Roskilde (DK)

2004-12-01

The purpose of this research project has been to further develop and test simple (aggregated) models of district heating (DH) systems for simulation and operational optimization, and to investigate the influence of Load Management and Demand Side Management (DMS) on the total operational costs. The work is based on physical-mathematical modelling and simulation of DH systems, and is a continuation of previous EFP-96 work. In the present EFP-2001 project the goals have been to improve the Danish method of aggregation by addressing the problem of aggregation of pressure losses, and to test the methods on a much larger data set than in the EFP-1996 project. In order to verify the models it is crucial to have good data at disposal. Full information on the heat loads and temperatures not only at the DH plant but also at every consumer (building) is needed, and therefore only a few DH systems in Denmark can supply such data. (BA)

Electronic Health Records Prospects in Egypt: A Demand-Side Perspective

OpenAIRE

Badran; Mona Farid

2017-01-01

The present study sheds light on the expected factors that would impact the Electronic Health Records (EHR) service in Egypt from the demand-side perspective, i.e. the health care consumer. This empirical study is motivated by the widespread use of EHR as a method of promoting health services globally, where it is considered as an efficiency enhancing, cost effective technology. Moreover, the healthcare sector in Egypt is gaining momentum, especially that the comprehensive healthcare and soci...

Promoting healthcare innovation on the demand side

Science.gov (United States)

Eisenberg, Rebecca S.

2017-01-01

Abstract Innovation policy often focuses on fortifying the incentives of firms that develop and sell new products by offering them lucrative rights to exclude competitors from the market. Regulators also rely on these same firms—and on similar incentives—to develop information about the effects of their products in patients, despite their obvious conflict of interest. The result may be a distorted understanding that leads to overuse of expensive new medical technologies. Recent technological advances have put healthcare payers in an excellent position to play a larger role in future innovation to improve healthcare and reduce its costs. Insurance companies and integrated healthcare providers have custody of treasure troves of data about healthcare provision and outcomes that can yield valuable insights about the effects of medical treatment without the need to conduct costly clinical trials. Some integrated healthcare systems have seized upon this advantage to make notable discoveries about the effects of particular products that have changed the standard of care. Moreover, to the extent that healthcare payers can profit from reducing costs, they will seek to avoid inappropriate use of costly technologies. Greater involvement of payers in healthcare innovation thus offers a potential counterweight to the incentives of product sellers to promote excessive use of costly new products. In recent years, the federal government has sought to promote innovation through analysis of healthcare records in a series of initiatives; some picture insurers as passive data repositories, while others provide opportunities for insurers to take a more active role in innovation. In this paper, we examine the role of health insurers in developing new knowledge about the provision and effects of healthcare—what we call ‘demand-side innovation’. We address the contours of this underexplored area of innovation and describe the behavior of participating firms. We examine the

Water Demand Management Policy Brief No

International Development Research Centre (IDRC) Digital Library (Canada)

Bob Stanley

Water demand management ― WDM ― can be hard to define. More an issue of policy than of technology, it is about managing and moderating our demands for good quality fresh water. It is less a matter of piping and pumps and more a tool ...

A Danish Heat Atlas for Supply Strategies and Demand Side Management

DEFF Research Database (Denmark)

Möller, Bernd

The expansion of district heating, the assessment of the impact of heat supply strategies, as well as the analysis of significant heat demand savings require sound decision support at high detail. Data is needed to continuously quantify potentials and costs of measures in the end-use and supply...... heat demand and possible savings. The location of each building relative to heat supply technologies is mapped and used for the assessment of supply strategies by potentials, costs and environmental impact. Both elements can furthermore be used to balance investments in supply with investments...

Orchestrating utility supply and demand in real-time via the Internet, home networks, and smart appliances

Energy Technology Data Exchange (ETDEWEB)

Cruickshank, R.F. III [Power Networks, Big Indian, NY (United States)

2008-07-01

This paper presented a model to illustrate the efficient coordination between the supply-side and demand-side of household electricity use and the magnitude of demand that can be managed using real-time pricing. In real-time supply and demand side management, a variable price for service is sent via Internet from the supply-side to the demand-side. The 3 benefits to this type of demand-side management are that traditional fossil-fuelled electrical capacity can operate less of the time and more efficiently; renewable electrical capacity such as wind and solar power can be put to use more efficiently when it becomes available; and additional means are available to protect the transmission and distribution infrastructure of the utility. A critical requirement is that pricing should change frequently throughout the day so that budget conscious consumers do not have to wait too long for favourable pricing to use their appliances. 12 refs., 9 figs.

Demand side load management using a three step optimization methodology

NARCIS (Netherlands)

Bakker, Vincent; Bosman, M.G.C.; Molderink, Albert; Hurink, Johann L.; Smit, Gerardus Johannes Maria

2010-01-01

In order to keep a proper functional electricity grid and to prevent large investments in the current grid, the creation, transmission and consumption of electricity needs to be controlled and organized in a different way as done nowadays. Smart meters, distributed generation and -storage and demand

Integrating Demand-Side Resources into the Electric Grid: Economic and Environmental Considerations

Science.gov (United States)

Fisher, Michael J.

Demand-side resources are taking an increasingly prominent role in providing essential grid services once provided by thermal power plants. This thesis considers the economic feasibility and environmental effects of integrating demand-side resources into the electric grid with consideration given to the diversity of market and environmental conditions that can affect their behavior. Chapter 2 explores the private economics and system-level carbon dioxide reduction when using demand response for spinning reserve. Steady end uses like lighting are more than twice as profitable as seasonal end uses because spinning reserve is needed year-round. Avoided carbon emission damages from using demand response instead of fossil fuel generation for spinning reserve are sufficient to justify incentives for demand response resources. Chapter 3 quantifies the system-level net emissions rate and private economics of behind-the-meter energy storage. Net emission rates are lower than marginal emission rates for power plants and in-line with estimates of net emission rates from grid-level storage. The economics are favorable for many buildings in regions with high demand charges like California and New York, even without subsidies. Future penetration into regions with average charges like Pennsylvania will depend greatly on installation cost reductions and wholesale prices for ancillary services. Chapter 4 outlines a novel econometric model to quantify potential revenues from energy storage that reduces demand charges. The model is based on a novel predictive metric that is derived from the building's load profile. Normalized revenue estimates are independent of the power capacity of the battery holding other performance characteristics equal, which can be used to calculate the profit-maximizing storage size. Chapter 5 analyzes the economic feasibility of flow batteries in the commercial and industrial market. Flow batteries at a 4-hour duration must be less expensive on a dollar per

Improving Water Demand Management Addressing Socioeconomic ...

International Development Research Centre (IDRC) Digital Library (Canada)

2012-01-20

Jan 20, 2012 ... Efforts to conserve water by improving water demand management policies in the Middle East and North Africa are often slowed or even thwarted by a lack of political consensus and support for water demand management from key powerful stakeholders with vested interest in the status quo. This policy ...

Improving Water Demand Management Addressing Socioeconomic ...

International Development Research Centre (IDRC) Digital Library (Canada)

Efforts to conserve water by improving water demand management policies in the Middle East and North Africa are often slowed or even thwarted by a lack of political consensus and support for water demand management from key powerful stakeholders with vested interest in the status quo. This policy brief based on ...

Coordinated Demand Response and Distributed Generation Management in Residential Smart Microgrids

DEFF Research Database (Denmark)

Anvari-Moghaddam, Amjad; Mokhtari, Ghassem; Guerrero, Josep M.

2016-01-01

potentials to increase the functionality of a typical demand-side management (DSM) strategy, and typical implementation of building-level DERs by integrating them into a cohesive, networked package that fully utilizes smart energy-efficient end-use devices, advanced building control/automation systems......Nowadays with the emerging of small-scale integrated energy systems (IESs) in form of residential smart microgrids (SMGs), a large portion of energy can be saved through coordinated scheduling of smart household devices and management of distributed energy resources (DERs). There are significant......, and an integrated communications architecture to efficiently manage energy and comfort at the end-use location. By the aid of such technologies, residential consumers have also the capability to mitigate their energy costs and satisfy their own requirements paying less attention to the configuration of the energy...

A socio-technical investigation of the smart grid: Implications for demand-side activities of electricity service providers

Science.gov (United States)

Corbett, Jacqueline Marie

Enabled by advanced communication and information technologies, the smart grid represents a major transformation for the electricity sector. Vast quantities of data and two-way communications abilities create the potential for a flexible, data-driven, multi-directional supply and consumption network well equipped to meet the challenges of the next century. For electricity service providers ("utilities"), the smart grid provides opportunities for improved business practices and new business models; however, a transformation of such magnitude is not without risks. Three related studies are conducted to explore the implications of the smart grid on utilities' demand-side activities. An initial conceptual framework, based on organizational information processing theory, suggests that utilities' performance depends on the fit between the information processing requirements and capacities associated with a given demand-side activity. Using secondary data and multiple regression analyses, the first study finds, consistent with OIPT, a positive relationship between utilities' advanced meter deployments and demand-side management performance. However, it also finds that meters with only data collection capacities are associated with lower performance, suggesting the presence of information waste causing operational inefficiencies. In the second study, interviews with industry participants provide partial support for the initial conceptual model, new insights are gained with respect to information processing fit and information waste, and "big data" is identified as a central theme of the smart grid. To derive richer theoretical insights, the third study employs a grounded theory approach examining the experience of one successful utility in detail. Based on interviews and documentary data, the paradox of dynamic stability emerges as an essential enabler of utilities' performance in the smart grid environment. Within this context, the frames of opportunity, control, and data

The Dark Side of Management

DEFF Research Database (Denmark)

Hanlon, Gerard; Dunne, Stephen; Johnsen, Christian Garmann

2017-01-01

Towards the end of 2015, the ephemera collective organised, chaired and participated within two separate Q+A panels celebrating the launch of Gerard Hanlon’s The dark side of management: A secret history of management theory. The events took place in The University of Leicester’s School of Manage...... of Management and Copenhagen Business School’s Management, Politics and Philosophy Department. Each of the events were recorded, transcribed, edited and amalgamated into the following feature....

Performance Assessment of Aggregation Control Services for Demand Response

DEFF Research Database (Denmark)

Bondy, Daniel Esteban Morales; Costanzo, Giuseppe Tommaso; Heussen, Kai

2014-01-01

Aggregation algorithms that provide services to the grid via demand side management are moving from research ideas to the market. With the diversity of the technology delivering such services, it becomes essential to establish transparent performance standards from a service delivery perspective...... of the quality of service provided by an aggregation control algorithm. By a detailed case study we present and an application of the index, comparing the performance of two different control architectures for demand side management delivering a distribution grid service....

Fast demand response in support of the active distribution network

NARCIS (Netherlands)

MacDougall, P.; Heskes, P.; Crolla, P.; Burt, G.; Warmer, C.

2013-01-01

Demand side management has traditionally been investigated for "normal" operation services such as balancing and congestion management. However they potentially could be utilized for Distributed Network Operator (DNO) services. This paper investigates and validates the use of a supply and demand

Local government involvement in long term resource planning for community energy systems. Demand side management

Energy Technology Data Exchange (ETDEWEB)

1992-03-01

A program was developed to coordinate governmental, research, utility, and business energy savings efforts, and to evaluate future potential actions, based on actual field data obtained during the implementation of Phase I of the State Resource Plan. This has lead to the establishment of a state conservation and energy efficiency fund for the purpose of establishing a DSM Program. By taking a state wide perspective on resource planning, additional savings, including environmental benefits, can be achieved through further conservation and demand management. This effort has already blossomed into a state directive for DSM programs for the natural gas industry.

Social demand for multiple benefits provided by Aleppo pine forest management in Catalonia, Spain

DEFF Research Database (Denmark)

Varela, Elsa; Jacobsen, Jette Bredahl; Mavsar, Robert

2017-01-01

This paper estimates the social demand for key benefits provided by Aleppo pine forests in Catalonia that can be enhanced by management. These so-called externalities are the side effects of forest management on citizens’ welfare and can be either positive or negative. The externalities addressed...... are: biodiversity (measured as the number of tree species), accessibility for practicing recreational activities, CO2 sequestration and annual burned area by wildfires. By the use of a choice experiment, an economic valuation method, we estimate in a joint manner people’s preferences...

Oh and by the way, you get meter readings too : a look at distribution automation, intelligent grids, and demand side management : getting the real value from your AMI

Energy Technology Data Exchange (ETDEWEB)

Summerlin, T. [Gestalt, Camden, NJ (United States); Ferguson, P.D. [Newmarket Hydro Ltd., Newmarket, ON (Canada)

2006-07-01

The full value of smart metering programs will be realized when information and communication capabilities are used to enable distribution automation, intelligent grids, and sufficient data management that will transform interval meter data into useful information. By leveraging and managing meter data effectively, utilities can increase their operational efficiency, improve their understanding of customers' needs, and develop more effective demand side management programs. This presentation examined some of the changing priorities of advanced metering infrastructure (AMI) strategies, and provided details of meter data management (MDM) technologies developed to help utilities increase efficiency, cut costs and provide better service to their customers. An MDM system is the set of data bases and applications required to provide utilities with a solution for the data retention, analysis and storage repository gaps that will be created when monthly manual meter readings are replaced with AMI systems. In order to resolve storage, functionality and legacy integration gaps, MDM systems must be scalable systems that can support large and small quantities of meter data, and must also conform to industry standard data warehouse designs. Data structure in the systems must support both regulated and deregulated markets, and be capable of providing extensive graphical, tabular and Excel export of the metered and totalized data from the interval to system level. MDM systems can provide improved support for demand response decision-making processes; distribution planning and reliability; outage management; revenue assurance; forecasting; and curtailment. It was concluded that MDM systems can be used to improve processes and provide additional benefits well beyond the meter reading and billing process benefits originally identified by utilities as a primary goal of implementing AMI. refs., tabs., figs.

Predictive Control of a Domestic Freezer for Real-Time Demand Response Applications

NARCIS (Netherlands)

Baghina, N.G.; Lampropoulos, I.; Asare-Bediako, B.; Kling, W.L.; Ribeiro, P.F.

2012-01-01

Demand side management and demand response aim to maximize the efficiency of the electricity delivery process by exploiting the flexibility of customers. At residential level, demand response can be applied only to a limited number of appliances, through load management, due to user intervention or

Maximizing Energy Savings Reliability in BC Hydro Industrial Demand-side Management Programs: An Assessment of Performance Incentive Models

Science.gov (United States)

Gosman, Nathaniel

For energy utilities faced with expanded jurisdictional energy efficiency requirements and pursuing demand-side management (DSM) incentive programs in the large industrial sector, performance incentive programs can be an effective means to maximize the reliability of planned energy savings. Performance incentive programs balance the objectives of high participation rates with persistent energy savings by: (1) providing financial incentives and resources to minimize constraints to investment in energy efficiency, and (2) requiring that incentive payments be dependent on measured energy savings over time. As BC Hydro increases its DSM initiatives to meet the Clean Energy Act objective to reduce at least 66 per cent of new electricity demand with DSM by 2020, the utility is faced with a higher level of DSM risk, or uncertainties that impact the costeffective acquisition of planned energy savings. For industrial DSM incentive programs, DSM risk can be broken down into project development and project performance risks. Development risk represents the project ramp-up phase and is the risk that planned energy savings do not materialize due to low customer response to program incentives. Performance risk represents the operational phase and is the risk that planned energy savings do not persist over the effective measure life. DSM project development and performance risks are, in turn, a result of industrial economic, technological and organizational conditions, or DSM risk factors. In the BC large industrial sector, and characteristic of large industrial sectors in general, these DSM risk factors include: (1) capital constraints to investment in energy efficiency, (2) commodity price volatility, (3) limited internal staffing resources to deploy towards energy efficiency, (4) variable load, process-based energy saving potential, and (5) a lack of organizational awareness of an operation's energy efficiency over time (energy performance). This research assessed the capacity

Achieving demand side management through eco-industrial networks

International Nuclear Information System (INIS)

Knight, N.

2002-01-01

This Power Point presentation describes the progress made by the Greater Vancouver Regional District (GVRD) in achieving sustainable development. The GVRD provides regional level infrastructure for drinking water, liquid waste treatment and solid waste management. Member municipalities provide the complementary services to businesses and residents of the communities. Particular emphasis has been given to protecting the green zone, building complete communities, achieving a compact Metropolitain region, and increasing transportation choices. The GVRD has also adopted a Livable Region Strategic Plan (LRSP) which encompasses economic, social and environmental issues. All member municipalities of the GVRD have prepared statements that indicate how their local policies will help achieve the LRSP goals. This presentation also includes a review of the region's air quality in order to emphasize the link between air quality and the pattern of urban development and transportation choices. The GVRD air quality management is unique in Canada. tabs., figs

“Souls of the ancestor that knock us out” and other tales. A qualitative study to identify demand-side factors influencing malaria case management in Cambodia

Directory of Open Access Journals (Sweden)

O’Connell Kathryn A

2012-10-01

Full Text Available Abstract Background Appropriate case management of suspected malaria in Cambodia is critical given anti-malarial drug resistance in the region. Improving diagnosis and the use of recommended malarial treatments is a challenge in Cambodia where self-treatment and usage of drug cocktails is widespread, a notable difference from malaria treatment seeking in other countries. This qualitative study adds to the limited evidence base on Cambodian practices, aiming to understand the demand-side factors influencing treatment-seeking behaviour, including the types of home treatments, perceptions of cocktail medicines and reasons for diagnostic testing. The findings may help guide intervention design. Methods The study used in-depth interviews (IDIs (N = 16 and focus group discussions (FGDs (N = 12 with Cambodian adults from malaria-endemic areas who had experienced malaria fever in the previous two weeks. Data were analysed using NVivo software. Results Findings suggest that Cambodians initially treat suspected malaria at home with home remedies and traditional medicines. When seeking treatment outside the home, respondents frequently reported receiving a cocktail of medicines from trusted providers. Cocktails are perceived as less expensive and more effective than full-course, pre-packaged medicines. Barriers to diagnostic testing include a belief in the ability to self-diagnose based on symptoms, cost and reliance on providers to recommend a test. Factors that facilitate testing include recommendation by trusted providers and a belief that anti-malarial treatment for illnesses other than malaria can be harmful. Conclusions Treatment-seeking behaviour for malaria in Cambodia is complex, driven by cultural norms, practicalities and episode-related factors. Effective malaria treatment programmes will benefit from interventions and communication materials that leverage these demand-side factors, promoting prompt visits to facilities for suspected

Demand-side financing measures to increase maternal health service utilisation and improve health outcomes: a systematic review of evidence from low- and middle-income countries.

Science.gov (United States)

Murray, Susan F; Hunter, Benjamin M; Bisht, Ramila; Ensor, Tim; Bick, Debra

2012-01-01

, observational and descriptive), qualitative studies (including designs based on phenomenology, grounded theory, ethnography, action research and feminist research), and economic studies (cost-effectiveness, cost-utility and costs studies). The Joanna Briggs Institute methodology for mixed-method systematic reviews was adopted. A three-step systematic search strategy was used to: 1) identify key terms, 2) search bibliographic databases and 3) retrieve additional publications from reference lists and sources of grey literature. Data were extracted from papers included in the review using the standardised data extraction tools for quantitative, qualitative and economic data from the Joanna Briggs Institute System for the Unified Management, Assessment and Review of Information. The quantitative and economic findings are presented in narrative form. Qualitative research findings were pooled using the Joanna Briggs Institute Qualitative Assessment and Review Instrument. This involved the aggregation or synthesis of findings to generate a set of statements that represent that aggregation, through assembling the findings (Level 1 findings), and categorising these findings on the basis of similarity in meaning (Level 2 findings). These categories were then subjected to a meta-synthesis in order to produce a single comprehensive set of synthesised findings (Level 3 findings) that can be used as a basis for evidence-based practice or policy. Seventy-two studies were included in the review. Drawing on work from several continents, many of the included studies were reports and evaluations for relevant government or funding agencies and represented important lesson-learning about implementation issues. However, fewer than half were published in peer reviewed journals and few were of high research quality.For three modes of demand-side financing (conditional cash transfers, payments to offset costs of access to maternal healthcare, and vouchers for maternity services) we found evidence

Preliminary guidelines for electricity distributor conservation and demand management activities : a guide for conservation and demand management investment

International Nuclear Information System (INIS)

2004-01-01

In May 2004, electricity distributors in Ontario were asked to submit deferral accounts to the Ontario Energy Board to track expenditures on conservation and demand management initiatives. The deferral accounts must be established before the distributor could recover the costs through the next installment of the allowable return on equity in March 2004. The Board will determine the appropriateness of the actual expenditures. These guidelines offer short-term assistance to distributors in establishing conservation and demand management plans and initiatives. The following specific measures may be supported by the Board: energy efficiency; operational changes to smart control systems; load management measures which facilitate interruptible and dispatchable loads, dual fuel applications, thermal storage and demand response; fuel switching measures; programs targeted to low income and hard to reach consumers; and, distributed energy options such as tri-generation, cogeneration, ground source heat pumps, wind and biomass systems. These guidelines described the regulatory treatment of conservation and demand management investments along with cost effectiveness, allocation of costs, monitoring, evaluation, and implementation. 1 appendix

Modeling and managing urban water demand through smart meters: Benefits and challenges from current research and emerging trends

Science.gov (United States)

Cominola, A.; Giuliani, M.; Castelletti, A.; Piga, D.; Rizzoli, A. E.

2015-12-01

Urban population growth, climate and land use change are expected to boost residential water demand in urban contexts in the next decades. In such a context, developing suitable demand-side management strategies is essential to meet future water demands, pursue water savings, and reduce the costs for water utilities. Yet, the effectiveness of water demand management strategies (WDMS) relies on our understanding of water consumers' behavior, their consumption habits, and the water use drivers. While low spatial and temporal resolution water consumption data, as traditionally gathered for billing purposes, hardly support this understanding, the advent of high-resolution, smart metering technologies allowed for quasi real-time monitoring water consumption at the single household level. This, in turn, is advancing our ability in characterizing consumers' behavior, modeling, and designing user-oriented residential water demand management strategies. Several water smart metering programs have been rolled-out in the last two decades worldwide, addressing one or more of the following water demand management phases: (i) data gathering, (ii) water end-uses characterization, (iii) user modeling, (iv) design and implementation of personalized WDMS. Moreover, the number of research studies in this domain is quickly increasing and big economic investments are currently being devoted worldwide to smart metering programs. With this work, we contribute the first comprehensive review of more than 100 experiences in the field of residential water demand modeling and management, and we propose a general framework for their classification. We revise consolidated practices, identify emerging trends and highlight the challenges and opportunities for future developments given by the use of smart meters advancing residential water demand management. Our analysis of the status quo of smart urban water demand management research and market constitutes a structured collection of information

Innovation and Demand

DEFF Research Database (Denmark)

Andersen, Esben Sloth

2007-01-01

the demand-side of markets in the simplest possible way. This strategy has allowed a gradual increase in the sophistication of supply-side aspects of economic evolution, but the one-sided focus on supply is facing diminishing returns. Therefore, demand-side aspects of economic evolution have in recent years...... received increased attention. The present paper argues that the new emphasis on demand-side factors is quite crucial for a deepened understanding of economic evolution. The major reasons are the following: First, demand represents the core force of selection that gives direction to the evolutionary process....... Second, firms' innovative activities relate, directly or indirectly, to the structure of expected and actual demand. Third, the demand side represents the most obvious way of turning to the much-needed analysis of macro-evolutionary change of the economic system....

Blockchain Based Decentralized Management of Demand Response Programs in Smart Energy Grids

Science.gov (United States)

Pop, Claudia; Cioara, Tudor; Antal, Marcel; Anghel, Ionut; Salomie, Ioan; Bertoncini, Massimo

2018-01-01

In this paper, we investigate the use of decentralized blockchain mechanisms for delivering transparent, secure, reliable, and timely energy flexibility, under the form of adaptation of energy demand profiles of Distributed Energy Prosumers, to all the stakeholders involved in the flexibility markets (Distribution System Operators primarily, retailers, aggregators, etc.). In our approach, a blockchain based distributed ledger stores in a tamper proof manner the energy prosumption information collected from Internet of Things smart metering devices, while self-enforcing smart contracts programmatically define the expected energy flexibility at the level of each prosumer, the associated rewards or penalties, and the rules for balancing the energy demand with the energy production at grid level. Consensus based validation will be used for demand response programs validation and to activate the appropriate financial settlement for the flexibility providers. The approach was validated using a prototype implemented in an Ethereum platform using energy consumption and production traces of several buildings from literature data sets. The results show that our blockchain based distributed demand side management can be used for matching energy demand and production at smart grid level, the demand response signal being followed with high accuracy, while the amount of energy flexibility needed for convergence is reduced. PMID:29315250

Blockchain Based Decentralized Management of Demand Response Programs in Smart Energy Grids.

Science.gov (United States)

Pop, Claudia; Cioara, Tudor; Antal, Marcel; Anghel, Ionut; Salomie, Ioan; Bertoncini, Massimo

2018-01-09

In this paper, we investigate the use of decentralized blockchain mechanisms for delivering transparent, secure, reliable, and timely energy flexibility, under the form of adaptation of energy demand profiles of Distributed Energy Prosumers, to all the stakeholders involved in the flexibility markets (Distribution System Operators primarily, retailers, aggregators, etc.). In our approach, a blockchain based distributed ledger stores in a tamper proof manner the energy prosumption information collected from Internet of Things smart metering devices, while self-enforcing smart contracts programmatically define the expected energy flexibility at the level of each prosumer, the associated rewards or penalties, and the rules for balancing the energy demand with the energy production at grid level. Consensus based validation will be used for demand response programs validation and to activate the appropriate financial settlement for the flexibility providers. The approach was validated using a prototype implemented in an Ethereum platform using energy consumption and production traces of several buildings from literature data sets. The results show that our blockchain based distributed demand side management can be used for matching energy demand and production at smart grid level, the demand response signal being followed with high accuracy, while the amount of energy flexibility needed for convergence is reduced.

Blockchain Based Decentralized Management of Demand Response Programs in Smart Energy Grids

Directory of Open Access Journals (Sweden)

Claudia Pop

2018-01-01

Full Text Available In this paper, we investigate the use of decentralized blockchain mechanisms for delivering transparent, secure, reliable, and timely energy flexibility, under the form of adaptation of energy demand profiles of Distributed Energy Prosumers, to all the stakeholders involved in the flexibility markets (Distribution System Operators primarily, retailers, aggregators, etc.. In our approach, a blockchain based distributed ledger stores in a tamper proof manner the energy prosumption information collected from Internet of Things smart metering devices, while self-enforcing smart contracts programmatically define the expected energy flexibility at the level of each prosumer, the associated rewards or penalties, and the rules for balancing the energy demand with the energy production at grid level. Consensus based validation will be used for demand response programs validation and to activate the appropriate financial settlement for the flexibility providers. The approach was validated using a prototype implemented in an Ethereum platform using energy consumption and production traces of several buildings from literature data sets. The results show that our blockchain based distributed demand side management can be used for matching energy demand and production at smart grid level, the demand response signal being followed with high accuracy, while the amount of energy flexibility needed for convergence is reduced.

Demand chain management - The evolution

Directory of Open Access Journals (Sweden)

D Ericsson

2011-06-01

Full Text Available The concepts of Supply Chain Management (SCM and Demand Chain Management (DCM are among the new and debated topics concerning logistics in the literature. The question considered in this paper is: “Are these concepts needed or will they just add to the confusion?” Lasting business concepts have always evolved in close interaction between business and academia. Different approaches start out in business and they are then, more or less si- multaneously, aligned, integrated, systemised and structured in academia. In this way a terminology (or language is provided that helps in further diffusion of the concepts. There is a lack of consensus on the definition of the concept of SCM. This may be one of the major reasons for the difficulty in advancing the science and measuring the results of implementation in business. Relationships in SCM span from rather loose coalitions to highly structured virtual network integrations. DCM is a highly organised chain in which the key is mutual interdependence and partnership. The purpose is to create a distinctive competence for the chain as a whole that helps to identify and satisfy customer needs and wishes. The classical research concerning vertical marketing systems is very helpful in systemising the rather unstructured discussions in current SCM research. The trend lies in increasing competition between channels rather than between companies, which in turn leads to the creation of channels with a high degree of partnership and mutual interdependence between members. These types of channels are known as organised vertical marketing systems in the classic marketing channel research. The behaviour in these types of channels, as well as the formal and informal structures, roles in the network, power and dependence relations, etc. are well covered topics in the literature. The concept of vertical marketing systems lies behind the definition of demand chains and demand chain management proposed in this paper. A

Novel effects of demand side management data on accuracy of electrical energy consumption modeling and long-term forecasting

International Nuclear Information System (INIS)

Ardakani, F.J.; Ardehali, M.M.

2014-01-01

Highlights: • Novel effects of DSM data on electricity consumption forecasting is examined. • Optimal ANN models based on IPSO and SFL algorithms are developed. • Addition of DSM data to socio-economic indicators data reduces MAPE by 36%. - Abstract: Worldwide implementation of demand side management (DSM) programs has had positive impacts on electrical energy consumption (EEC) and the examination of their effects on long-term forecasting is warranted. The objective of this study is to investigate the effects of historical DSM data on accuracy of EEC modeling and long-term forecasting. To achieve the objective, optimal artificial neural network (ANN) models based on improved particle swarm optimization (IPSO) and shuffled frog-leaping (SFL) algorithms are developed for EEC forecasting. For long-term EEC modeling and forecasting for the U.S. for 2010–2030, two historical data types used in conjunction with developed models include (i) EEC and (ii) socio-economic indicators, namely, gross domestic product, energy imports, energy exports, and population for 1967–2009 period. Simulation results from IPSO-ANN and SFL-ANN models show that using socio-economic indicators as input data achieves lower mean absolute percentage error (MAPE) for long-term EEC forecasting, as compared with EEC data. Based on IPSO-ANN, it is found that, for the U.S. EEC long-term forecasting, the addition of DSM data to socio-economic indicators data reduces MAPE by 36% and results in the estimated difference of 3592.8 MBOE (5849.9 TW h) in EEC for 2010–2030

The demand-side innovation policies in the context of small EU member country. Nõudluspoolsed innovatsioonipoliitikad Euroopa Liidu väikese liikmesriigi kontekstis

Directory of Open Access Journals (Sweden)

Tõnu Roolaht

2013-01-01

Full Text Available Demand-side innovation policies, in the form of regulations, public procurement, subsidies for private demand, and other measures, are often viewed as valuable additions to more traditional supply-side policies. The demand-side innovation policies should enable to facilitate the emergence of vital and sustainable links between innovation outputs and various markets. However, without sufficient institutional framework and policy experiences such measures could also contribute to new market distortions or crowding-out effects, which do not facilitate sustainable growth in innovations. The charting of possible risks of such policies should help to outline the criteria for aiming at sustainable effects. The purpose of this contribution is to offer suggestions about preconditions and policy characteristics, which should help to avoid the misuse of demand-side measures and facilitate the sustainability of desired changes in society. It is predominantly conceptual contribution but draws also extensively on case evidence about the effects of relevant policies and their discontinuation

Multi-objective demand side scheduling considering the operational safety of appliances

International Nuclear Information System (INIS)

Du, Y.F.; Jiang, L.; Li, Y.Z.; Counsell, J.; Smith, J.S.

2016-01-01

Highlights: • Operational safety of appliances is introduced in multi-objective scheduling. • Relationships between operational safety and other objectives are investigated. • Adopted Pareto approach is compared with Weigh and Constraint approaches. • Decision making of Pareto approach is proposed for final appliances’ scheduling. - Abstract: The safe operation of appliances is of great concern to users. The safety risk increases when the appliances are in operation during periods when users are not at home or when they are asleep. In this paper, multi-objective demand side scheduling is investigated with consideration to the appliances’ operational safety together with the electricity cost and the operational delay. The formulation of appliances’ operational safety is proposed based on users’ at-home status and awake status. Then the relationships between the operational safety and the other two objectives are investigated through the approach of finding the Pareto-optimal front. Moreover, this approach is compared with the Weigh and Constraint approaches. As the Pareto-optimal front consists of a set of optimal solutions, this paper proposes a method to make the final scheduling decision based on the relationships among the multiple objectives. Simulation results demonstrate that the operational safety is improved with the sacrifice of the electricity cost and the operational delay, and that the approach of finding the Pareto-optimal front is effective in presenting comprehensive optimal solutions of the multi-objective demand side scheduling.

Demand Response Spinning Reserve Demonstration

Energy Technology Data Exchange (ETDEWEB)

Eto, Joseph H.; Nelson-Hoffman, Janine; Torres, Carlos; Hirth,Scott; Yinger, Bob; Kueck, John; Kirby, Brendan; Bernier, Clark; Wright,Roger; Barat, A.; Watson, David S.

2007-05-01

The Demand Response Spinning Reserve project is a pioneeringdemonstration of how existing utility load-management assets can providean important electricity system reliability resource known as spinningreserve. Using aggregated demand-side resources to provide spinningreserve will give grid operators at the California Independent SystemOperator (CAISO) and Southern California Edison (SCE) a powerful, newtool to improve system reliability, prevent rolling blackouts, and lowersystem operating costs.

Balancing supply and demand resources

International Nuclear Information System (INIS)

Sinha, J.; Saleeby, R.G.

1990-01-01

This article deals with using demand-side management (DSM) resources as an effective means of balancing supply and demand as a part of least-cost planning. The authors present a more sophisticated application of the load forecast adjustment method that reduces the number of DSM programs that need to be evaluated and provides blocks large enough to eliminate resolution problems in production costing models

Increasing access to institutional deliveries using demand and supply side incentives: early results from a quasi-experimental study

Directory of Open Access Journals (Sweden)

Serwadda David

2011-03-01

Full Text Available Abstract Background Geographical inaccessibility, lack of transport, and financial burdens are some of the demand side constraints to maternal health services in Uganda, while supply side problems include poor quality services related to unmotivated health workers and inadequate supplies. Most public health interventions in Uganda have addressed only selected supply side issues, and universities have focused their efforts on providing maternal services at tertiary hospitals. To demonstrate how reforms at Makerere University College of Health Sciences (MakCHS can lead to making systemic changes that can improve maternal health services, a demand and supply side strategy was developed by working with local communities and national stakeholders. Methods This quasi-experimental trial is conducted in two districts in Eastern Uganda. The supply side component includes health worker refresher training and additions of minimal drugs and supplies, whereas the demand side component involves vouchers given to pregnant women for motorcycle transport and the payment to service providers for antenatal, delivery, and postnatal care. The trial is ongoing, but early analysis from routine health information systems on the number of services used is presented. Results Motorcyclists in the community organized themselves to accept vouchers in exchange for transport for antenatal care, deliveries and postnatal care, and have become actively involved in ensuring that women obtain care. Increases in antenatal, delivery, and postnatal care were demonstrated, with the number of safe deliveries in the intervention area immediately jumping from Conclusions Transport and service vouchers appear to be a viable strategy for rapidly increasing maternal care. MakCHS can design strategies together with stakeholders using a learning-by-doing approach to take advantage of community resources.

Demand management in Multi-Stage Distribution Chain

NARCIS (Netherlands)

de Kok, T.; Janssen, F.B.S.L.P.

1996-01-01

In this paper we discuss demand management problems in a multi-stage distribution chain.We focus on distribution chains where demand processes have high variability due to a few large customer orders.We give a possible explanation, and suggest two simple procedures that help to smooth demand.It is

Institutions for Effective Water Demand Management

International Development Research Centre (IDRC) Digital Library (Canada)

2010-12-14

Dec 14, 2010 ... The paper also describes the state of South African WDM to highlight ... Download the PDF: Working Paper 4: Institutions for Effective Water Demand Management ​ ... Managing flood risk through collaborative governance.

Demand management implementation in Southeast Asia

Energy Technology Data Exchange (ETDEWEB)

Tanaboriboon, Y.

1995-12-31

The need to apply transportation system management, to developing countries is urgent. Attempts to alleviate severe traffic congestion in their metropolises have so far failed to provide adequate solutions. The countries are faced with many difficulties because of the lack of sufficient financial resources together with their complex internal administrative and political problems. They are incapable of providing sufficient road space to cope with the escalating demand in private automobiles. This has led to excessive delays in urban traveling, environmental pollution problems, decline of road-based public transit services and deterioration of the quality of life in these metropolises. Demand management, in use for decades in the Western world, has also been recognized in Singapore`s famous area licensing scheme (ALS) making other Southeast Asian Metropolises aware of its advantages as an alternative in solving their chaotic traffic problems. However, realization is far different from implementation and still many metropolises are not able to apply the technique. Singapore and Thailand, two leaders among many other Southeast Asian regions in economics, tourism, trade and industry handle their problems far differently, especially the traffic congestion problem. While a number of demand management schemes have been implemented successfully in Singapore since 1975, Bangkok is still struggling to implement such measures to alleviate severe traffic congestion problems. This article intends to high light the successful practices and unsuccessful attempts of demand management techniques applied in Singapore and Bangkok.

An Economic Evalution of Demand-side Energy Storage Systems by using a Multi-agent based Electricity Market

Science.gov (United States)

Furusawa, Ken; Sugihara, Hideharu; Tsuji, Kiichiro

Opened wholesale electric power market in April 2005, deregulation of electric power industry in Japan has faced a new competitive environment. In the new environment, Independent Power Producer (: IPP), Power Producer and Supplier (: PPS), Load Service Entity (: LSE) and electric utility can trade electric energy through both bilateral contracts and single-price auction at the electricity market. In general, the market clearing price (: MCP) is largely changed by amount of total load demand in the market. The influence may cause price spike, and consequently the volatility of MCP will make LSEs and their customers to face a risk of revenue and cost. DSM is attracted as a means of load leveling, and has effect on decreasing MCP at peak load period. Introducing Energy Storage systems (: ES) is one of DSM in order to change demand profile at customer-side. In case that customers decrease their own demand at jumped MCP, a bidding strategy of generating companies may be changed their strategy. As a result, MCP is changed through such complex mechanism. In this paper the authors evaluate MCP by multi-agent. It is considered that customer-side ES has an effect on MCP fluctuation. Through numerical examples, this paper evaluates the influence on MCP by controlling customer-side ES corresponding to variation of MCP.

Criteria for demand response systems

NARCIS (Netherlands)

Lampropoulos, I.; Kling, W.L.; Bosch, van den P.P.J.; Ribeiro, P.F.; Berg, van den J.

2013-01-01

The topic of demand side management is currently becoming more important than ever, in parallel with the further deregulation of the electricity sector, and the increasing integration of renewable energy sources. A historical review of automation integration in power system control assists in

Managing Chemotherapy Side Effects: Constipation

Science.gov (United States)

N ational C ancer I nstitute Managing Chemotherapy Side Effects Constipation Take these steps: Eat high-fiber foods such as: ● ● Whole-grain breads and cereals ● ● Fruits and vegetables ● ● Nuts and seeds Turn this ...

Energy management in microgrid based on the multi objective stochastic programming incorporating portable renewable energy resource as demand response option

International Nuclear Information System (INIS)

Tabar, Vahid Sohrabi; Jirdehi, Mehdi Ahmadi; Hemmati, Reza

2017-01-01

Renewable energy resources are often known as cost-effective and lucrative resources and have been widely developed due to environmental-economic issues. Renewable energy utilization even in small scale (e.g., microgrid networks) has attracted significant attention. Energy management in microgrid can be carried out based on the generating side management or demand side management. In this paper, portable renewable energy resource are modeled and included in microgrid energy management as a demand response option. Utilizing such resources could supply the load when microgrid cannot serve the demand. This paper addresses energy management and scheduling in microgrid including thermal and electrical loads, renewable energy sources (solar and wind), CHP, conventional energy sources (boiler and micro turbine), energy storage systems (thermal and electrical ones), and portable renewable energy resource (PRER). Operational cost of microgrid and air pollution are considered as objective functions. Uncertainties related to the parameters are incorporated to make a stochastic programming. The proposed problem is expressed as a constrained, multi-objective, linear, and mixed-integer programing. Augmented Epsilon-constraint method is used to solve the problem. Final results and calculations are achieved using GAMS24.1.3/CPLEX12.5.1. Simulation results demonstrate the viability and effectiveness of the proposed method in microgrid energy management. - Highlights: • Introducing portable renewable energy resource (PRER) and considering effect of them. • Considering reserve margin and sensitivity analysis for validate robustness. • Multi objective and stochastic management with considering various loads and sources. • Using augmented Epsilon-constraint method to solve multi objective program. • Highly decreasing total cost and pollution with PRER in stochastic state.

Increasing access to institutional deliveries using demand and supply side incentives: early results from a quasi-experimental study.

Science.gov (United States)

Ekirapa-Kiracho, Elizabeth; Waiswa, Peter; Rahman, M Hafizur; Makumbi, Fred; Kiwanuka, Noah; Okui, Olico; Rutebemberwa, Elizeus; Bua, John; Mutebi, Aloysius; Nalwadda, Gorette; Serwadda, David; Pariyo, George W; Peters, David H

2011-03-09

Geographical inaccessibility, lack of transport, and financial burdens are some of the demand side constraints to maternal health services in Uganda, while supply side problems include poor quality services related to unmotivated health workers and inadequate supplies. Most public health interventions in Uganda have addressed only selected supply side issues, and universities have focused their efforts on providing maternal services at tertiary hospitals. To demonstrate how reforms at Makerere University College of Health Sciences (MakCHS) can lead to making systemic changes that can improve maternal health services, a demand and supply side strategy was developed by working with local communities and national stakeholders. This quasi-experimental trial is conducted in two districts in Eastern Uganda. The supply side component includes health worker refresher training and additions of minimal drugs and supplies, whereas the demand side component involves vouchers given to pregnant women for motorcycle transport and the payment to service providers for antenatal, delivery, and postnatal care. The trial is ongoing, but early analysis from routine health information systems on the number of services used is presented. Motorcyclists in the community organized themselves to accept vouchers in exchange for transport for antenatal care, deliveries and postnatal care, and have become actively involved in ensuring that women obtain care. Increases in antenatal, delivery, and postnatal care were demonstrated, with the number of safe deliveries in the intervention area immediately jumping from Voucher revenues have been used to obtain needed supplies to improve quality and to pay health workers, ensuring their availability at a time when workloads are increasing. Transport and service vouchers appear to be a viable strategy for rapidly increasing maternal care. MakCHS can design strategies together with stakeholders using a learning-by-doing approach to take advantage of

When the 'soft-path' gets hard: demand management and financial instability for water utilities

Science.gov (United States)

Zeff, H. B.; Characklis, G. W.

2014-12-01

In the past, cost benefit analysis (CBA) has been viewed as an effective means of evaluating water utility strategies, particularly those that were dependent on the construction of new supply infrastructure. As water utilities have begun to embrace 'soft-path' approaches as a way to reduce the need for supply-centric development, CBA fails to recognize some important financial incentives affected by reduced water consumption. Demand management, both as a short-term response to drought and in longer-term actions to accommodate demand growth, can introduce revenue risks that adversely affect a utility's ability to repay debt, re-invest in aging infrastructure, or maintain reserve funds for use in a short-term emergency. A utility that does not generate sufficient revenue to support these functions may be subject to credit rating downgrades, which in turn affect the interest rate it pays on its debt. Interest rates are a critical consideration for utility managers in the capital-intensive water sector, where debt payments for infrastructure often account for a large portion of a utility's overall costs. Even a small increase in interest rates can add millions of dollars to the cost of new infrastructure. Recent studies have demonstrated that demand management techniques can lead to significant revenue variability, and credit rating agencies have begun to take notice of drought response plans when evaluating water utility credit ratings, providing utilities with a disincentive to fully embrace soft-path approaches. This analysis examines the impact of demand management schemes on key credit rating metrics for a water utility in Raleigh, North Carolina. The utility's consumer base is currently experiencing rapid population growth, and demand management has the potential to reduce the dependence on costly new supply infrastructure but could lead to financial instability that will significantly increase the costs of financing future projects. This work analyzes how 'soft

Flexible Demand Management under Time-Varying Prices

Science.gov (United States)

Liang, Yong

In this dissertation, the problem of flexible demand management under time-varying prices is studied. This generic problem has many applications, which usually have multiple periods in which decisions on satisfying demand need to be made, and prices in these periods are time-varying. Examples of such applications include multi-period procurement problem, operating room scheduling, and user-end demand scheduling in the Smart Grid, where the last application is used as the main motivating story throughout the dissertation. The current grid is experiencing an upgrade with lots of new designs. What is of particular interest is the idea of passing time-varying prices that reflect electricity market conditions to end users as incentives for load shifting. One key component, consequently, is the demand management system at the user-end. The objective of the system is to find the optimal trade-off between cost saving and discomfort increment resulted from load shifting. In this dissertation, we approach this problem from the following aspects: (1) construct a generic model, solve for Pareto optimal solutions, and analyze the robust solution that optimizes the worst-case payoffs, (2) extend to a distribution-free model for multiple types of demand (appliances), for which an approximate dynamic programming (ADP) approach is developed, and (3) design other efficient algorithms for practical purposes of the flexible demand management system. We first construct a novel multi-objective flexible demand management model, in which there are a finite number of periods with time-varying prices, and demand arrives in each period. In each period, the decision maker chooses to either satisfy or defer outstanding demand to minimize costs and discomfort over a certain number of periods. We consider both the deterministic model, models with stochastic demand or prices, and when only partial information about the stochastic demand or prices is known. We first analyze the stochastic

How to optimize tourism destination supply: A case in Shanghai from perspective of supplier and demand side perception

Science.gov (United States)

Xue, Huaju; Fang, Chengjiang

2018-02-01

It is vital to assess the regional tourist supply capability by suppliers and demand groups. The supply side’s evaluation of the regional supply capacity determines the direction of the supply investment in future, the demand side’s evaluation indicates their satisfaction degree of the destination supply and also effects their revisit the tourism destination. Therefore, the assessment of the supply and demand sides is an important reference for the reform of destination supply side, which helps us find the shortage of the destination supply factors and optimize tourism destination supply promptly. This paper through investigating tourism supply and demand groups in Shanghai, used the survey data and constructed tourism supply optimization model, analyzed the current situation of tourism supply factors in Shanghai. Results showed that the environment of Shanghai should be improved first, including improving urban air and water quality, up-grading public sanitation and increasing urban green coverage. Other supply factors improved priority were information and marketing, we should improve the information consultation of scenic spots, increase the intensity of tourism promotion and provide more free travel publicity brochures.

Improving the cost effectiveness of financial incentives in managing travel demand management (TDM).

Science.gov (United States)

2013-10-01

Providing financial incentives to commuters to use alternative modes is a common element of managing transportation demand. Although these incentives have become common during the past two decades as elements of transportation demand management (TDM)...

Demonstrating a small utility approach to demand-side program implementation

International Nuclear Information System (INIS)

1991-01-01

The US DOE awarded a grant to the Burlington Electric Department (B.E.D.) to test a demand-side management (DSM) demonstration program designed to quickly save a significant amount of power with little disruption to the utility's customers or its normal operations. B.E.D. is a small municipal utility located in northern Vermont, with a lengthy history of successful DSM involvement. In our grant application, we proposed to develop a replicable program and approach to DSM that might be useful to other small utilities and to write a report to enable such replication. We believe that this DSM program and/or individual program components are replicable. This report is designed to allow other utilities interested in DSM to replicate this program or specific program design features to meet their DSM goals. We also wanted to use the opportunity of this grant to test the waters of residential heating fuel-switching. We hoped to test the application of one fuel-switching technology, and to benefit from the lessons learned in developing a full-scale DSM program for this end- use. To this end the pilot effort has been very successful. In the pilot pressure we installed direct-vent gas fired space heaters sized as supplemental heating units in 44 residences heated solely by electric resistance heat. We installed the gas space heating units at no cost to the owners or residents. We surveyed participating customers. The results of those surveys are included in this report and preliminary estimates of winter peak capacity load reductions are also noted in this report

Demonstrating a small utility approach to demand-side program implementation

Energy Technology Data Exchange (ETDEWEB)

1991-10-01

The US DOE awarded a grant to the Burlington Electric Department (B.E.D.) to test a demand-side management (DSM) demonstration program designed to quickly save a significant amount of power with little disruption to the utility's customers or its normal operations. B.E.D. is a small municipal utility located in northern Vermont, with a lengthy history of successful DSM involvement. In our grant application, we proposed to develop a replicable program and approach to DSM that might be useful to other small utilities and to write a report to enable such replication. We believe that this DSM program and/or individual program components are replicable. This report is designed to allow other utilities interested in DSM to replicate this program or specific program design features to meet their DSM goals. We also wanted to use the opportunity of this grant to test the waters of residential heating fuel-switching. We hoped to test the application of one fuel-switching technology, and to benefit from the lessons learned in developing a full-scale DSM program for this end- use. To this end the pilot effort has been very successful. In the pilot pressure we installed direct-vent gas fired space heaters sized as supplemental heating units in 44 residences heated solely by electric resistance heat. We installed the gas space heating units at no cost to the owners or residents. We surveyed participating customers. The results of those surveys are included in this report and preliminary estimates of winter peak capacity load reductions are also noted in this report.

Low-enthalpy geothermal resources for electricity production: A demand-side management study for intelligent communities

DEFF Research Database (Denmark)

Xydis, George A.; Nanaki, Evanthia A.; Koroneos, Christopher J.

2013-01-01

The geological conditions in Greece contributed to the creation of important low-enthalpy geothermal energy resources (LEGERs). The resources are divided into low, medium and high enthalpy, or temperature, based on criteria that are generally based on the energy content of the fluid. LEGERs...... and northern part of the country, as well as in many of the Aegean Islands. The aim of this work is to review the options for managing wind load by using low-enthalpy geothermal energy for electricity (through heat pump utilisation) according to the local energy demand....... are those sources of the hot water whose temperature is between 25 and 100°C, which are used for heating residences and in the agricultural or industrial sector. The investigation for the exploitation of low-enthalpy geothermal fluids, which began around 1980, intensified in the last two decades. The low...

Demand Management Based on Model Predictive Control Techniques

Directory of Open Access Journals (Sweden)

Yasser A. Davizón

2014-01-01

Full Text Available Demand management (DM is the process that helps companies to sell the right product to the right customer, at the right time, and for the right price. Therefore the challenge for any company is to determine how much to sell, at what price, and to which market segment while maximizing its profits. DM also helps managers efficiently allocate undifferentiated units of capacity to the available demand with the goal of maximizing revenue. This paper introduces control system approach to demand management with dynamic pricing (DP using the model predictive control (MPC technique. In addition, we present a proper dynamical system analogy based on active suspension and a stability analysis is provided via the Lyapunov direct method.

[Institutional demands and care demands in the management of nurses in an emergency unit].

Science.gov (United States)

Montezelli, Juliana Helena; Peres, Aida Maris; Bernardino, Elizabeth

2011-01-01

To characterize the registered nurse's management activities in an emergency department. Qualitative research, implemented from February to April 2009 by a semi-structured interview with eight nurses from an emergency department at a university hospital in Curitiba, PR. Brazil. The data was submitted to content analyses. Two categories emerged: Management focused on meeting the institutional demands that emphasizes the Registered Nurses' bureaucratic activities required by the hospital; and Management focused on meeting the nursing care demands that prioritizes the care as the main management activity. The study reached its objective and joined the literature findings that the division between care and management does not match with the registered nurse's performance at an emergency department.

Evaluation of flexible demand-side load-following reserves in power systems with high wind generation penetration

NARCIS (Netherlands)

Paterakis, N.G.; Catalao, J.P.S.; Ntomaris, A.V.; Erdinc, O.

2015-01-01

In this study, a two-stage stochastic programming joint energy and reserve day-ahead market structure is proposed in order to procure the required load-following reserves to tackle with wind power production uncertainty. Reserves can be procured both from generation and demand-side. Responsive

Financial treatment of demand management expenditures at Ontario Hydro

International Nuclear Information System (INIS)

Ariss, D.G.

1990-01-01

Ontario Hydro's demand side management (DSM) plan comprises reduction of load, load shifting, and peak shaving. It includes an accounting policy applied only to measures which reduce demand by the increase in the efficiency of electricity of utilization or by the shifting of load from peak periods to off-peak periods. In order to choose the pertinent periods for which the DSM expenditures should be recovered, the utility has considered three accounting options: expensing all DSM expenditures as incurred; deferring all DSM expenditures; or deferring only those DSM expenditures that meet specified criteria. Ontario Hydro has chosen the last option, since it is in conformity with generally accepted accounting principles. This option is based on the matching principle, under which costs and revenues that are linked to each other in a cause-and-effect relationship should be recognized in the same accounting period. It has also been judged advantageous to amortize the deferred expenses corresponding to each measure over appropriate periods. It has also been established that the amortization period should begin immediately after each measure has been put into operation. This accounting policy ensures that expenses relating to DSM are accounted in a pertinent and uniform manner. 6 refs

Water Demand Management Policy Brief No

International Development Research Centre (IDRC) Digital Library (Canada)

Bob Stanley

Fair share: Water Demand Management can help provide fair access to water for the poor. Water Policy. Brief no.2 ... management (WDM) can help spread water more equitably, providing a measure of opportunity, security and ... improving health and quality of life for families. WDM measures can improve the efficiency of.

Australia's long-term electricity demand forecasting using deep neural networks

OpenAIRE

Hamedmoghadam, Homayoun; Joorabloo, Nima; Jalili, Mahdi

2018-01-01

Accurate prediction of long-term electricity demand has a significant role in demand side management and electricity network planning and operation. Demand over-estimation results in over-investment in network assets, driving up the electricity prices, while demand under-estimation may lead to under-investment resulting in unreliable and insecure electricity. In this manuscript, we apply deep neural networks to predict Australia's long-term electricity demand. A stacked autoencoder is used in...

Managing Chemotherapy Side Effects: Bleeding Problems

Science.gov (United States)

... C ancer I nstitute Managing Chemotherapy Side Effects Bleeding Problems “My nurse said that chemotherapy could make ... with a clean cloth. Keep pressing until the bleeding stops. If you bruise: Put ice on the ...

Emission impacts of demand-side programs: What have we achieved so far and how will recent policy decision change program choices?

International Nuclear Information System (INIS)

Tempchin, R.S.; Van den Berg, A.J.; Geba, V.B.; Felix, C.S.; Goldsmith, M.W.

1990-01-01

Congress and many state legislatures have been discussing the possibility of regulating carbon dioxide (CO 2 ), Sulfur dioxide (SO 2 ), nitrogen oxides (NO x ), chlorofluorocarbons (CFC's) and other emissions. Key to these discussions is the recommendation that energy efficiency, and specifically electric utility demand-side management (DSM) programs, be used as an emission control option. Methods for incorporating the social or external costs of energy production into utility planning are being developed, and estimates of potential emission impacts attributed to DSM programs have been calculated. However, little research has calculated the actual emission impacts from existing DSM programs. The increasing need for electric energy services and fossil fuel generation create an apparent conflict with the risks and regulations associated with global climate change and clean air. Electric utility DSM programs can be used to resolve these conflicts by providing equal or better energy services and a net reduction in emissions. This paper summarizes three separate related research projects. The first study, Impacts of Electric Utility Demand-Side Management Programs on Power Plant Emissions, collects utility and state data on existing DSM programs to approximate the level of SO 2 , NO x , and CO 2 reductions on a regional and national basis. Phase 1 of this study is a completed survey of DSM savings by state. The second and third studies, Carbon Dioxide Reduction Through Electrification of the Industrial and Transportation Sectors, and Carbon Dioxide Reduction Through Electrification of the Residential and Commercial Sectors, compare selected high efficiency electric technologies with fossil-fueled alternatives to determine CO 2 emissions. Through these studies, the authors have begun to quantify the emissions impacts from utility DSM programs and efficient electric equipment

Measuring and controlling unfairness in decentralized planning of energy demand

NARCIS (Netherlands)

Pournaras, E.; Vasirani, M.; Kooij, R.E.; Aberer, K.

2014-01-01

Demand-side energy management improves robustness and efficiency in Smart Grids. Load-adjustment and load-shifting are performed to match demand to available supply. These operations come at a discomfort cost for consumers as their lifestyle is influenced when they adjust or shift in time their

Demand Management in E-Fulfillment

NARCIS (Netherlands)

N.A.H. Agatz (Niels)

2009-01-01

textabstractInternet retailers are in a unique position to adjust, in real-time, the product and service offering to the customer and to change the corresponding prices. Although this flexibility provides a vast potential for demand management to enhance profitability, standard practices and models

An Intuitive Definition of Demand Flexibility in Direct Load Control

DEFF Research Database (Denmark)

Tahersima, Fatemeh; Madsen, Per Printz; Andersen, Palle

2013-01-01

Two control approaches: direct and indirect control of demand side energy management in a smart grid are studied. Indirect control of energy demands is based on economic incentives. In this approach, consumers will shift their energy consumption with the benefit of a cut down in the electricity b...

Low-enthalpy geothermal resources for electricity production: A demand-side management study for intelligent communities

International Nuclear Information System (INIS)

Xydis, George A.; Nanaki, Evanthia A.; Koroneos, Christopher J.

2013-01-01

The geological conditions in Greece contributed to the creation of important low-enthalpy geothermal energy resources (LEGERs). The resources are divided into low, medium and high enthalpy, or temperature, based on criteria that are generally based on the energy content of the fluid. LEGERs are those sources of the hot water whose temperature is between 25 and 100 °C, which are used for heating residences and in the agricultural or industrial sector. The investigation for the exploitation of low-enthalpy geothermal fluids, which began around 1980, intensified in the last two decades. The low-enthalpy geothermal potential in Greece is rather significant as most of the geothermal fields have been found in regions with favourable developmental conditions, and it seems that they do not present serious environmental or technical exploitation problems. LEGER areas are abundant in Greece, mainly in the eastern and northern part of the country, as well as in many of the Aegean Islands. The aim of this work is to review the options for managing wind load by using low-enthalpy geothermal energy for electricity (through heat pump utilisation) according to the local energy demand. -- Highlights: •Approximately 45.43 GWh per year of electricity can be covered from low-enthalpy geothermal energy resources (LEGERs). •In particular, 10% of the electricity demand can be covered from the LEGER N. Kessani (NK). •The needs for LEGER contribution were increased when wind turbine (WT) production was low. •In winter, where there is abundance of wind, LEGER can be used mostly for heating. •During summer, LEGER can assist more in electricity when heating is not needed

Water Demand Management for Social Justice | IDRC - International ...

International Development Research Centre (IDRC) Digital Library (Canada)

2012-01-18

Jan 18, 2012 ... Water Demand Management for Social Justice ... Women play larger role in Latin America's commercial urban waste management ... the management of solid waste in Latin America, according to research supported by IDRC.

Tapping Alternatives: The Benefits of Managing Urban Water Demands.

Science.gov (United States)

Dziegielewski, Benedykt; Baumann, Duane D.

1992-01-01

Presents the California plan for water demand management. Water conservation techniques are used to balance demand with supply. Discusses the implementation process: (1) water-use and service area analysis; (2) water-use forecasts; (3) benefit-cost analysis; (4) and development of a long-term water management plan. (17 references) (MCO)

Electricity demand in France: what's at stake for the energy transition?

International Nuclear Information System (INIS)

Berghmans, Nicolas

2017-02-01

This study identifies five key issues linked to electricity consumption to be taken into consideration in the management of the French power system transition: articulating the building stock renovation strategy and electricity consumption; integrating demand for electricity stemming from the development of electric vehicles; addressing winter 'peak' demand with specific demand-side policies; establishing energy demand management economic models as a flexible solution for the power system; identifying the impact of the emergence of a power system that is decentralised, balanced locally and connected with other energy carriers on the nature of demand for power from the grid. In the context of weak economic and demographic growth, the recent stabilization of electricity demand in France can be attributed to 'structural' factors, i.e. the continued expansion of the tertiary sector in the economy and the acceleration in energy efficiency gains. This evolution was poorly anticipated by stakeholders in the sector, which contributed to an imbalance between electricity demand and supply in Europe. In the absence of a major disruption, planning for transition in the electrical system should be made assuming relatively stable demand. However, major transformations will change the nature of the requirements placed on the electricity system: the times at which energy is consumed, the ability to manage the demand side of the system, and the geographical location of electricity demand within the network. Five key challenges are identified to anticipate the development of electricity consumption patterns: the role of electricity in satisfying building sector heating requirements, the integration of electric vehicle charging, the evolution of the winter demand peak, the development of demand-side management, and the emergence of an electric system based on local-level balancing. Too often considered an exogenous factor, the development in electricity consumption is in fact central

Conceptual framework for load controlling : with demand reduction bidding & consumer retention

NARCIS (Netherlands)

Babar, M.; Ahamed, I.; Al-Ammar, E.A.

2013-01-01

Advancement in demand side management strategies enables smart grid to cope with the increasing energy demand and provide economic benefit to all of its stakeholders. Moreover, emerging concept of smart pricing and advances in load control and communication generate new business opportunities as a

The design of optimal electric power demand management contracts

Science.gov (United States)

Fahrioglu, Murat

1999-11-01

Our society derives a quantifiable benefit from electric power. In particular, forced outages or blackouts have enormous consequences on society, one of which is loss of economic surplus. Electric utilities try to provide reliable supply of electric power to their customers. Maximum customer benefit derives from minimum cost and sufficient supply availability. Customers willing to share in "availability risk" can derive further benefit by participating in controlled outage programs. Specifically, whenever utilities foresee dangerous loading patterns, there is a need for a rapid reduction in demand either system-wide or at specific locations. The utility needs to get relief in order to solve its problems quickly and efficiently. This relief can come from customers who agree to curtail their loads upon request in exchange for an incentive fee. This thesis shows how utilities can get efficient load relief while maximizing their economic benefit. This work also shows how estimated customer cost functions can be calibrated, using existing utility data, to help in designing efficient demand management contracts. In order to design such contracts, optimal mechanism design is adopted from "Game Theory" and applied to the interaction between a utility and its customers. The idea behind mechanism design is to design an incentive structure that encourages customers to sign up for the right contract and reveal their true value of power. If a utility has demand management contracts with customers at critical locations, most operational problems can be solved efficiently. This thesis illustrates how locational attributes of customers incorporated into demand management contract design can have a significant impact in solving system problems. This kind of demand management contracts can also be used by an Independent System Operator (ISO). During times of congestion a loss of economic surplus occurs. When the market is too slow or cannot help relieve congestion, demand management

Generation and Demand Scheduling for a Grid-Connected Hybrid Microgrid Considering Price-based Incentives

DEFF Research Database (Denmark)

Hernández, Adriana Carolina Luna; Aldana, Nelson Leonardo Diaz; Savaghebi, Mehdi

2017-01-01

Microgrids rely on energy management levels to optimally schedule their components. Conventionally, the research in this field has been focused on the optimal formulation of the generation or the demand side management separately without considering real case scenarios and validated only...... by simulation. This paper presents the power scheduling of a real site microgrid under a price-based demand response program defined in Shanghai, China managing generation and demand simultaneously. The proposed optimization problem aims to minimize operating cost by managing renewable energy sources as well...

The demand-side innovation policies and sustainable development in the small EU country. Nõudluspoolsed innovatsioonipoliitikad ja jätkusuutlik areng Euroopa Liidu väikeriigis

Directory of Open Access Journals (Sweden)

Tõnu Roolaht

2012-01-01

Full Text Available Various regulations, standards, public procurement activities, subsidies for private demand, and other similar support measures form the demand-side innovation policies. In the modern era, countries and governments dedicate more and more attention to the economic, social, and environmental sustainability of development and entrepreneurship. Sustainable development aims to meet human needs so that economic and social conditions will improve or at least not deteriorate and environment is preserved in order to allow future generations to meet their needs as well. Several demand-side innovation policy measures target also sustainability either as primary or secondary goal. Such policy measures tend to suffer from overshooting effects or fail to influence the behaviour in a desired manner. The purpose of this study is to offer suggestions concerning demand-side policy measures in order to improve their impact on the sustainability of development

Comparison of the marketing of demand response capacity and of power plant capacity in the minutes reserve market; Vergleich der Vermarktung von Demand-Response- und Kraftwerksleistung auf dem Minutenreservemarkt

Energy Technology Data Exchange (ETDEWEB)

Marz, Waldemar; Tzscheutschler, Peter [Technische Univ. Muenchen (Germany). Lehrstuhl fuer Energiewirtschaft und Anwendungstechnik; Henle, Markus [Stadtwerke Muenchen (Germany). Energiewirtschaft

2013-03-15

The greatest challenge in integrating renewable energies into the German and European power supply system lies in levelling out the imbalances between the fluctuating supply of energy from the wind and sun on the one side and the steady demand of the consumers on the other. Aside from the expansion of supra-regional transmission systems and storage power plants one instrument that has raised great hopes is the possibility of adapting demand to supply. These methods are known by the names of demand response (DR) or demand side management (DSM) and are at the core of the ''smart grid'' concept.

Simulation-based Strategies for Smart Demand Response

Directory of Open Access Journals (Sweden)

Ines Leobner

2018-03-01

Full Text Available Demand Response can be seen as one effective way to harmonize demand and supply in order to achieve high self-coverage of energy consumption by means of renewable energy sources. This paper presents two different simulation-based concepts to integrate demand-response strategies into energy management systems in the customer domain of the Smart Grid. The first approach is a Model Predictive Control of the heating and cooling system of a low-energy office building. The second concept aims at industrial Demand Side Management by integrating energy use optimization into industrial automation systems. Both approaches are targeted at day-ahead planning. Furthermore, insights gained into the implications of the concepts onto the design of the model, simulation and optimization will be discussed. While both approaches share a similar architecture, different modelling and simulation approaches were required by the use cases.

Increased demand-side flexibility: market effects and impacts on variable renewable energy integration

Directory of Open Access Journals (Sweden)

Åsa Grytli Tveten

2016-12-01

Full Text Available This paper investigates the effect of increased demand-side flexibility (DSF on integration and market value of variable renewable energy sources (VRE. Using assumed potentials, system-optimal within-day shifts in demand are investigated for the Northern European power markets in 2030, applying a comprehensive partial equilibrium model with high temporal and spatial resolution. Increased DSF is found to cause only a minor (less than 3% reduction in consumers’ cost of electricity. VRE revenues are found to increase (up to 5% and 2% for wind and solar power, respectively, and total VRE curtailment decreases by up to 7.2 TWh. Increased DSF causes only limited reductions in GHG emissions. The emission reduction is, however, sensitive to underlying assumptions. We conclude that increased DSF is a promising measure for improving VRE integration. However, low consumers’ savings imply that policies stimulating DFS will be needed to fully use the potential benefits of DSF for VRE integration

Future internet concepts for demand management

CSIR Research Space (South Africa)

Madhoo, H

2015-04-01

Full Text Available research and experimental initiative linked to the Future Internet (TRESCIMO) which facilitates the validity of using these technologies as base for energy demand management. The initiative utilises a philosophy of informing customers about their energy...

Improving Water Demand Management by Addressing ...

International Development Research Centre (IDRC) Digital Library (Canada)

IDRC CRDI

Efforts to conserve water by improving water demand management policies .... First, ensure fair access to sustainable water supply, as well as, responsible water use. ... Water policy can also mandate reducing the loss of quantity or quality of ...

The benefits and barriers associated with prices to manage industrial demand

International Nuclear Information System (INIS)

Dominie, A.E.; Brunetto, T.

1990-01-01

Implementation of demand-side management (DSM) programs for the industrial sector is not the same as for the commercial or residental sectors. This difference is derived from sectoral characteristics such as global competition, uniqueness of production facilities, cash flow and budget constraints, and the relationship and trust of a customer with an electric utility. Experience has shown the success of DSM programs in industry to depend on factors such as market philosophies emphasizing fulfilling the needs of customers, the ability to measure and reward performance for achieving specific conservation and load management goals, technical expertise, short-term payback, size of risk, and degree of operational disturbance caused by the program. Time-of-use pricing for the industrial sector has been the subject of very few studies in Canada. Most of these studies show that hourly rate differentiation was not beneficial and that seasonal time-of-use rates would provide little benefit due to the nature of the load and the utility system. An outline is presented of time-of-use concepts in current Canadian utility rate structures. 1 tab

Managing Chemotherapy Side Effects: Swelling (Fluid Retention)

Science.gov (United States)

N ational C ancer I nstitute Managing Chemotherapy Side Effects Swelling (Fluid retention) “My hands and feet were swollen and puffy. My nurse helped me understand why I had to stop eating salty ...

Managing Chemotherapy Side Effects: Nausea and Vomiting

Science.gov (United States)

N ational C ancer I nstitute Managing Chemotherapy Side Effects U.S. DEPARTMENT OF HEALTH AND HUMAN SERVICES National Institutes of Health Nausea and Vomiting “I take medicine so I won’t feel sick ...

Demand chain management | The evolution | Ericsson | ORiON

African Journals Online (AJOL)

The concepts of Supply Chain Management (SCM) and Demand Chain Management ... Dierent approaches start out in business and they are then, more or less ... The classical research concerning vertical marketing systems is very helpful in ...

Demand-Side Financing in Education: a Critical Examination of a Girls' Scholarship Program in Malawi--(Case Study)

Science.gov (United States)

Sineta, Abraham

2012-01-01

Despite the push for universal education, many disadvantaged and poor children in developing countries still do not have access to basic education. This among other reasons is due to poverty where poor families cannot afford the cost of basic education even when it is "free" of tuition (McDonald, 2007). Demand-side financing…

Demand- and supply-side determinants of diphtheria-pertussis-tetanus nonvaccination and dropout in rural India.

Science.gov (United States)

Ghosh, Arpita; Laxminarayan, Ramanan

2017-02-15

Although 93% of 12- to 23-month-old children in India receive at least one vaccine, typically Bacillus Calmette-Guérin, only 75% complete the recommended three doses of diphtheria-pertussis-tetanus (DPT, also referred to as DTP) vaccine. Determinants can be different for nonvaccination and dropout but have not been examined in earlier studies. We use the three-dose DPT series as a proxy for the full sequence of recommended childhood vaccines and examine the determinants of DPT nonvaccination and dropout between doses 1 and 3. We analyzed data on 75,728 6- to 23-month-old children in villages across India to study demand- and supply-side factors determining nonvaccination with DPT and dropout between DPT doses 1 and 3, using a multilevel approach. Data come from the District Level Household and Facility Survey 3 (2007-08). Individual- and household-level factors were associated with both DPT nonvaccination and dropout between doses 1 and 3. Children whose mothers had no schooling were 2.3 times more likely not to receive any DPT vaccination and 1.5 times more likely to drop out between DPT doses 1 and 3, compared with children whose mothers had 10 or more years of schooling. Although supply-side factors related to availability of public health facilities and immunization-related health workers in villages were not correlated with dropout between DPT doses 1 and 3, children in districts where 46% or more villages had a healthcare subcentre were 1.5 times more likely to receive at least one dose of DPT vaccine compared with children in districts where 30% or fewer villages had subcentres. Nonvaccination with DPT in India is influenced by village- and district-level contextual factors over and above individuals' background characteristics. Dropout between DPT doses 1 and 3 is associated more strongly with demand-side factors than with village- and district-level supply-side factors. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

Managing Chemotherapy Side Effects: Hair Loss (Alopecia)

Science.gov (United States)

... C ancer I nstitute Managing Chemotherapy Side Effects Hair Loss (Alopecia) “Losing my hair was hard at first. ... and anywhere on your body may fall out. Hair loss is called alopecia. When will my hair start ...

Management of Water Demand in Africa and the Middle East ...

International Development Research Centre (IDRC) Digital Library (Canada)

Management of Water Demand in Africa and the Middle East : Current Practices and Future Needs. Couverture du livre Management of Water Demand in Africa and the Middle East : Current Practices. Directeur(s) : David B. Brooks, Eglal Rached et Maurice Saade. Maison(s) d'édition : CRDI. 1 janvier 1997. ISBN : Épuisé.

Management of Water Demand in Africa and the Middle East ...

International Development Research Centre (IDRC) Digital Library (Canada)

1997-01-01

Management of Water Demand in Africa and the Middle East : Current Practices and Future Needs. Couverture du livre Management of Water Demand in Africa and the Middle East : Current Practices. Editor(s):. David B. Brooks, Eglal Rached et Maurice Saade. Publisher(s):. CRDI. January 1, 1997. ISBN: Épuisé. 78 pages.

Water Demand Management Policy Brief No

International Development Research Centre (IDRC) Digital Library (Canada)

Bob Stanley

Water demand management (WDM) programs have been widely implemented across the MENA region and elsewhere, with varying degrees of success. The criteria below are intended to help policymakers determine how best to develop institutions with the capacity and capability to design, implement and monitor WDM ...

ICT Solutions for Highly-Customized Water Demand Management Strategies

Science.gov (United States)

Giuliani, M.; Cominola, A.; Castelletti, A.; Fraternali, P.; Guardiola, J.; Barba, J.; Pulido-Velazquez, M.; Rizzoli, A. E.

2016-12-01

The recent deployment of smart metering networks is opening new opportunities for advancing the design of residential water demand management strategies (WDMS) relying on improved understanding of water consumers' behaviors. Recent applications showed that retrieving information on users' consumption behaviors, along with their explanatory and/or causal factors, is key to spot potential areas where targeting water saving efforts, and to design user-tailored WDMS. In this study, we explore the potential of ICT-based solutions in supporting the design and implementation of highly customized WDMS. On one side, the collection of consumption data at high spatial and temporal resolutions requires big data analytics and machine learning techniques to extract typical consumption features from the metered population of water users. On the other side, ICT solutions and gamifications can be used as effective means for facilitating both users' engagement and the collection of socio-psychographic users' information. This latter allows interpreting and improving the extracted profiles, ultimately supporting the customization of WDMS, such as awareness campaigns or personalized recommendations. Our approach is implemented in the SmartH2O platform and demonstrated in a pilot application in Valencia, Spain. Results show how the analysis of the smart metered consumption data, combined with the information retrieved from an ICT gamified web user portal, successfully identify the typical consumption profiles of the metered users and supports the design of alternative WDMS targeting the different users' profiles.

Time management behavior as a moderator for the job demand-control interaction

NARCIS (Netherlands)

Peeters, M.A.G.; Rutte, C.G.

2005-01-01

The interaction effects of time management, work demands, and autonomy on burnout were investigated in a survey study of 123 elementary teachers. A 3-way interaction between time management, work demands, and autonomy was hypothesized: The combination of high work demands and low autonomy was

DEVELOPMENT OF THE E-GOVERNMENT MARKET IN THE EUROPEAN UNION: AN ANALYSIS OF THE SUPPLY VERSUS DEMAND SIDES

Directory of Open Access Journals (Sweden)

Veghes Calin

2011-07-01

Full Text Available E-government represents one of the most palpable results of the dynamic development of the information and communication technology. Defined mostly as an intensive use of information technologies to provide public services, e-government has been approached in the literature rather from a technological perspective, with a significant importance given to the supply and a lower attention paid to the demand side. The increasing interest in taking into consideration the demand side in the development of the e-government initiatives and projects has created the foundation for a shift in the way the conceptual framework for e-government planning and implementation is defined, from the technology infrastructure and costs to the customer-centric character of all the efforts done. The European Union put e-government on its agenda aiming to improve access to the public information and services, increase transparency of public administration, exploit effectively the information technology within public administration, and establishing e-procurement. The development of the e-government services in the Member States, as it is expressed by the data regarding the supply and demand side, has been conducted in a more or less different manner that led, at the Unions level, to a relatively high availability but a rather low usage of the specific services. The paper explores the relationship between the e-government supply and demand based on the secondary data referring to the public services available to the citizens (as these are defined by the Eurostat methodology and the usage of these services by the individuals, integrating them through an analytical matrix inspired by the BCG model. Probably the most important conclusion of this analysis states that development of the e-government services has not been accompanied by measures meant to stimulate their usage in the most of the European Union Member States. The analytical matrix allowed also the identification

An Appreciative View of the Brighter Side of Terror Management Processes

OpenAIRE

Kenneth E. Vail, III; Jacob Juhl

2015-01-01

Physical death is an inevitable part of life. From the perspective of terror management theory (TMT), people’s efforts to manage the awareness of death can sometimes have harmful social consequences. However, those negative consequences are merely one side of the existential coin. In considering the other side of the coin, the present article highlights the more beneficial trajectories of the terror management process. For example, the awareness of mortality can motivate people to prioritize ...

Demand side management in recycling and electricity retail pricing

Science.gov (United States)

Kazan, Osman

This dissertation addresses several problems from the recycling industry and electricity retail market. The first paper addresses a real-life scheduling problem faced by a national industrial recycling company. Based on their practices, a scheduling problem is defined, modeled, analyzed, and a solution is approximated efficiently. The recommended application is tested on the real-life data and randomly generated data. The scheduling improvements and the financial benefits are presented. The second problem is from electricity retail market. There are well-known patterns in daily usage in hours. These patterns change in shape and magnitude by seasons and days of the week. Generation costs are multiple times higher during the peak hours of the day. Yet most consumers purchase electricity at flat rates. This work explores analytic pricing tools to reduce peak load electricity demand for retailers. For that purpose, a nonlinear model that determines optimal hourly prices is established based on two major components: unit generation costs and consumers' utility. Both are analyzed and estimated empirically in the third paper. A pricing model is introduced to maximize the electric retailer's profit. As a result, a closed-form expression for the optimal price vector is obtained. Possible scenarios are evaluated for consumers' utility distribution. For the general case, we provide a numerical solution methodology to obtain the optimal pricing scheme. The models recommended are tested under various scenarios that consider consumer segmentation and multiple pricing policies. The recommended model reduces the peak load significantly in most cases. Several utility companies offer hourly pricing to their customers. They determine prices using historical data of unit electricity cost over time. In this dissertation we develop a nonlinear model that determines optimal hourly prices with parameter estimation. The last paper includes a regression analysis of the unit generation cost

Integrated design and evaluation of biomass energy system taking into consideration demand side characteristics

International Nuclear Information System (INIS)

Ren, Hongbo; Zhou, Weisheng; Nakagami, Ken'ichi; Gao, Weijun

2010-01-01

In this paper, a linear programming model has been developed for the design and evaluation of biomass energy system, while taking into consideration demand side characteristics. The objective function to be minimized is the total annual cost of the energy system for a given customer equipped with a biomass combined cooling, heating and power (CCHP) plant, as well as a backup boiler fueled by city gas. The results obtained from the implementation of the model demonstrate the optimal system capacities that customers could employ given their electrical and thermal demands. As an illustrative example, an investigation addresses the optimal biomass CCHP system for a residential area located in Kitakyushu Science and Research Park, Japan. In addition, sensitivity analyses have been elaborated in order to show how the optimal solutions would vary due to changes of some key parameters including electricity and city gas tariffs, biogas price, electricity buy-back price, as well as carbon tax rate. (author)

Demand-Side Flexibility for Energy Transitions: Ensuring the Competitive Development of Demand Response Options

OpenAIRE

Nursimulu, Anjali; Florin, Marie-Valentine; Vuille, François

2015-01-01

This report provides an overview of the current debates about demand response development, focusing primarily on Europe, with some comparisons to the United States. ‘Demand response’ includes strategies that involve end-use customers adapting or altering their electricity demand in response to grid conditions or market prices. It is viewed as a multi-purpose power-system resource that enhances the energy system’s capacity to cope with increasing demand, rising costs of conventional transmissi...

Addressing maternal healthcare through demand side financial incentives: experience of Janani Suraksha Yojana program in India.

Science.gov (United States)

Gopalan, Saji S; Durairaj, Varatharajan

2012-09-15

Demand side financing (DSF) is a widely employed strategy to enhance utilization of healthcare. The impact of DSF on health care seeking in general and that of maternal care in particular is already known. Yet, its effect on financial access to care, out-of-pocket spending (OOPS) and provider motivations is not considerably established. Without such evidence, DSFs may not be recommendable to build up any sustainable healthcare delivery approach. This study explores the above aspects on India's Janani Suraksha Yojana (JSY) program. This study employed design and was conducted in three districts of Orissa, selected through a three-stage stratified sampling. The quantitative method was used to review the Health Management Information System (HMIS). The qualitative methods included focus groups discussions with beneficiaries (n = 19) and community intermediaries (n = 9), and interviews (n = 7) with Ministry of Health officials. HMIS data enabled to review maternal healthcare utilization. Group discussions and interviews explored the perceived impact of JSY on in-facility delivery, OOPS, healthcare costs, quality of care and performance motivation of community health workers. The number of institutional deliveries, ante-and post-natal care visits increased after the introduction of JSY with an annual net growth of 18.1%, 3.6% and 5% respectively. The financial incentive provided partial financial risk-protection as it could cover only 25.5% of the maternal healthcare cost of the beneficiaries in rural areas and 14.3% in urban areas. The incentive induced fresh out-of-pocket spending for some mothers and it could not address maternal care requirements comprehensively. An activity-based community worker model was encouraging to augment maternal healthcare consumption. However, the existing level of financial incentives and systemic support were inadequate to motivate the volunteers optimally on their performance. Demand side financial incentive could enhance financial

The benefits and barriers associated with using prices to manage industrial demand

International Nuclear Information System (INIS)

Dominie, A.E.; Brunetto, T.

1990-01-01

Implementation of demand-side management (DSM) programs for the industrial sector is not the same as for the commercial or residental sectors. This difference is derived from sectoral characteristics such as global competition, uniqueness of production facilities, cash flow and budget constraints, and the relationship and trust of a customer with an electric utility. Experience has shown the success of DSM programs in industry to depend on factors such as market philosophies emphasizing fulfilling the needs of customers, the ability to measure and reward performance for achieving specific conservation and load management goals, technical expertise, short-term payback, size of risk, and degree of operational disturbance caused by the program. Time-of-use pricing for the industrial sector has been the subject of very few studies in Canada. Most of these studies show that hourly rate differentiation was not beneficial and that seasonal time-of-use rates would provide little benefit due to the nature of the load and the utility system. An outline is presented of time-of-use concepts in current Canadian utility rate structures. 1 tab

Simulation of demand side participation in Spanish short term electricity markets

International Nuclear Information System (INIS)

Valencia-Salazar, I.; Alvarez, C.; Escriva-Escriva, G.; Alcazar-Ortega, M.

2011-01-01

Highlights: → Benefits from customer active participation can be obtained with a proper generation of bids and offers. → Simulation of Spanish customers' participation is shown in daily, intra-daily and balancing markets. → Market efficiency and economics profits arise in balancing markets by using customer load reductions. → Real market prices and real customers' consumptions profiles are used in the simulations. -- Abstract: Demand response resources management is one of the most investigated solutions oriented to improve the efficiency in electricity markets. In this paper, the capability of customers to participate in short term markets is analyzed. An available methodology to analyze the daily and monthly energy consumptions of large customers is used to create energy offers and bids. This allows customers to participate in energy markets in order to buy, as first step, the usual electricity consumption and, additionally, to offer demand reductions in the short term electricity markets. Additionally, this paper shows the customer potential to participate in the Spanish electricity markets.

Demand-side mitigation options of the agricultural sector: potential, barriers and ways forward

Directory of Open Access Journals (Sweden)

Brunelle Thierry

2017-01-01

Full Text Available This paper reviews the potential and barriers of demand-side mitigation options in the agricultural sector based on the recent academic literature and on a survey conducted on a sample of 788 respondents living in France. The mitigation potential of such measures as reducing losses in the food supply chain and shifting diets toward less animal products is estimated to be particularly high, higher, in particular, than supply-side mitigation options. However, to ensure that these measures do not entail a reduction in protein intake, these estimations should consider both caloric and protein units, and take into account the digestibility differentials between protein sources. Our survey shows that people are relatively reluctant to eat more sustainably, preferring to reduce their emissions in other areas such as housing or equipment. This relative reluctance is mainly due to individual perceptions linked to health concerns, taste or habits. Some obstacles could easily be overcome through well-designed policies aiming to, for example, advertise a lower consumption of red meat for health benefits. National governments are, however, rather inactive on this topic, leaving the initiative to the civil society.

Option value of electricity demand response

Energy Technology Data Exchange (ETDEWEB)

Sezgen, Osman; Goldman, C.A. [Lawrence Berkeley National Laboratory, 1 Cyclotron Road, Berkeley CA 94720 (United States); Krishnarao, P. [Citigroup Energy Inc., 1301 Fannin St, Houston, TX 77002 (United States)

2007-02-15

As electricity markets deregulate and energy tariffs increasingly expose customers to commodity price volatility, it is difficult for energy consumers to assess the economic value of investments in technologies that manage electricity demand in response to changing energy prices. The key uncertainties in evaluating the economics of demand-response technologies are the level and volatility of future wholesale energy prices. In this paper, we demonstrate that financial engineering methodologies originally developed for pricing equity and commodity derivatives (e.g., futures, swaps, options) can be used to estimate the value of demand-response technologies. We adapt models used to value energy options and assets to value three common demand-response strategies: load curtailment, load shifting or displacement, and short-term fuel substitution-specifically, distributed generation. These option models represent an improvement to traditional discounted cash flow methods for assessing the relative merits of demand-side technology investments in restructured electricity markets. (author)

Option value of electricity demand response

International Nuclear Information System (INIS)

Sezgen, Osman; Goldman, C.A.; Krishnarao, P.

2007-01-01

As electricity markets deregulate and energy tariffs increasingly expose customers to commodity price volatility, it is difficult for energy consumers to assess the economic value of investments in technologies that manage electricity demand in response to changing energy prices. The key uncertainties in evaluating the economics of demand-response technologies are the level and volatility of future wholesale energy prices. In this paper, we demonstrate that financial engineering methodologies originally developed for pricing equity and commodity derivatives (e.g., futures, swaps, options) can be used to estimate the value of demand-response technologies. We adapt models used to value energy options and assets to value three common demand-response strategies: load curtailment, load shifting or displacement, and short-term fuel substitution-specifically, distributed generation. These option models represent an improvement to traditional discounted cash flow methods for assessing the relative merits of demand-side technology investments in restructured electricity markets. (author)

A Novel Technique to Enhance Demand Responsiveness

DEFF Research Database (Denmark)

Farashbashi-Astaneh, Seyed-Mostafa; Bhattarai, Bishnu Prasad; Bak-Jensen, Birgitte

2015-01-01

In this study, a new pricing approach is proposed to increase demand responsiveness. The proposed approach considers two well-known demand side management techniques, namely peak shaving and valley filling. This is done by incentivising consumers by magnifying price difference between peak and off......-peak hours. The usefulness of the suggested method is then investigated by its combination with an electric vehicle optimal scheduling methodology which captures both economic valuation and grid technical constraints. This case is chosen in this study to address network congestion issues, namely under...

Potential transportation demand management programs and measures

Energy Technology Data Exchange (ETDEWEB)

Litman, T. [Victoria Transport Policy Institute, Victoria, BC (Canada)

1997-02-07

The advantages of transportation demand management (TDM) programs were discussed. TDM includes several policies, programs and measures designed to change travel patterns. TDM programs include commute trip reductions, pricing policies, land use management strategies, and programs to support alternative modes of transportation such as public transit, carpooling, bicycling, walking and telecommuting. TDM programs are designed to reduce traffic congestion and air pollution. Some other TDM programs and measures include: enabling programs, alternative mode encouragement, driving disincentives, parking programs, marginalizing user costs, reducing automobile ownership, and land use management.

Solar + Storage Synergies for Managing Commercial-Customer Demand Charges

Energy Technology Data Exchange (ETDEWEB)

Gagnon, Pieter J. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Govindarajan, Anand [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Bird, Lori A. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Barbose, Galen [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Darghouth, Naim [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Mills, Andrew [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2017-10-24

We study the synergies between behind-the-meter solar and storage in reducing commercial-customer demand charges. This follows two previous studies that examined demand charge savings for stand-alone solar in both the residential and commercial sectors. In this study we show that solar and storage show consistent synergies for demand charge management, that the magnitude of reductions are highly customer-specific, and that the magnitude of savings is influenced by the design of the electricity tariff.

Time management behavior as a moderator for the job demand-control interaction.

Science.gov (United States)

Peeters, Miranda A G; Rutte, Christel G

2005-01-01

The interaction effects of time management, work demands, and autonomy on burnout were investigated in a survey study of 123 elementary teachers. A 3-way interaction between time management, work demands, and autonomy was hypothesized: The combination of high work demands and low autonomy was predicted to lead to burnout for teachers low in time management and not, or to a lesser extent, for those high in time management. This hypothesis is confirmed for emotional exhaustion, the most predictive dimension of teacher burnout, and partly confirmed for the personal accomplishment dimension. Generalizability to other contactual occupations is discussed. ((c) 2005 APA, all rights reserved).

THE CONCEPT OF REFLEXIVE MANAGEMENT OF CONSUMER DEMAND

Directory of Open Access Journals (Sweden)

Maryna Mavrina

2017-11-01

Full Text Available Development of theoretical approaches of demand management is conducted from the moment of awareness of the importance of this concept. Many models of individual consumers were developed. However, to predict the reaction of consumers to the commercial policy of the enterprise, exact methods do not exist yet because the available ones are mostly empirical in nature. Models of behaviour often do not provide the expected result because they use an erroneous approach to the analysis of the mechanism of demand formation. The subject of the research is the theoretical and methodological basis, methods of assessment, and reflexive management of consumer demand of commercial enterprises. The purpose of the paper is developing a concept of reflexive management of consumer demand. To achieve the research goal, the following tasks are set and solved: to substantiate the theoretical and methodological foundations of reflexive consumer management, to analyse existing approaches to the modelling of consumer behaviour; to improve the model of consumer behaviour; to develop a concept of reflexive management of consumer behaviour. Methodology. In the paper, we use such methods and approaches to research as: reflexive approach (phenomenological method, behavioural economic theory, marketing approach, abstract-logical analysis, analysis of theoretical approaches to the modelling of consumer behaviour. Results. Modern approaches to modelling of consumer behaviour are mostly empirical in nature and have shortcomings of general models. In them, there is no description of specific situations of the purchase of goods. They cannot be quantified. Therefore, they cannot be practical models. But they have a weighty advantage in a comprehensive look at motivated purchases, what makes it possible to evaluate the relevance of individual variables and to understand the fundamental processes of consumer behaviour. It makes possible to identify the variables necessary for the

Addressing Energy Demand through Demand Response. International Experiences and Practices

Energy Technology Data Exchange (ETDEWEB)

Shen, Bo [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Ghatikar, Girish [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Ni, Chun Chun [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Dudley, Junqiao [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Martin, Phil [Enernoc, Inc., Boston, MA (United States); Wikler, Greg

2012-06-01

Demand response (DR) is a load management tool which provides a cost-effective alternative to traditional supply-side solutions to address the growing demand during times of peak electrical load. According to the US Department of Energy (DOE), demand response reflects “changes in electric usage by end-use customers from their normal consumption patterns in response to changes in the price of electricity over time, or to incentive payments designed to induce lower electricity use at times of high wholesale market prices or when system reliability is jeopardized.” 1 The California Energy Commission (CEC) defines DR as “a reduction in customers’ electricity consumption over a given time interval relative to what would otherwise occur in response to a price signal, other financial incentives, or a reliability signal.” 2 This latter definition is perhaps most reflective of how DR is understood and implemented today in countries such as the US, Canada, and Australia where DR is primarily a dispatchable resource responding to signals from utilities, grid operators, and/or load aggregators (or DR providers).

Water brief — Wastewater Reuse for Water Demand Management ...

International Development Research Centre (IDRC) Digital Library (Canada)

2011-01-04

Jan 4, 2011 ... Water Demand Management (WDM) is a water management approach that aims to ... WDM is simply defined as 'getting the most of the water that we have', while taking into ... Villages in Nepal prepare for weather extremes.

Nursing-led management of side effects of radiation: evidence-based recommendations for practice

Directory of Open Access Journals (Sweden)

Poirier P

2013-03-01

Full Text Available Patricia PoirierUniversity of Maine School of Nursing, Orono, ME, USAAbstract: It has been estimated that 50%–60% of patients diagnosed with cancer will receive radiation therapy at some point in their treatment. Although radiation therapy can play a significant role in the cure or control of cancer, and the palliation of symptoms, it also has side effects. Side effects of radiation therapy can interfere with patient quality of life and daily functioning. Severe side effects can lead to delays in treatment, potentially affecting the outcome of treatment. All patients receiving radiation therapy are at risk of fatigue and skin reactions in the area of the body being treated. Other side effects of radiation therapy are specific to the part of the body being treated. Radiation therapy to the head and neck area may cause oral mucositis, dryness, and nutritional deficiencies. Radiation therapy to the chest or lung area may lead to difficulty in swallowing and eating. Radiation therapy to the pelvis frequently causes diarrhea. There are many nursing interventions available to manage the side effects of treatment based on best available evidence and expert opinion. Nurses in all settings are essential in helping patients manage the side effects of treatment and maintain their quality of life. The purpose of this review is to provide nurses with evidence-based recommendations and suggestions for managing common acute side effects of radiation therapy.Keywords: evidence-based practice, radiation therapy, side effects, nursing management

Water Demand Management ― Making the most of the water we ...

International Development Research Centre (IDRC) Digital Library (Canada)

2010-12-22

Dec 22, 2010 ... Water demand management ― WDM ― can be hard to define. More an issue of policy than of technology, it is about managing and moderating our demands for good quality fresh water. It is less a matter of piping and pumps and more a tool for changing the ways we use water and the rates at which we ...

Ketamine for Pain Management-Side Effects & Potential Adverse Events.

Science.gov (United States)

Allen, Cheryl A; Ivester, Julius R

2017-12-01

An old anesthetic agent, ketamine is finding new use in lower doses for analgesic purposes. There are concerns stemming from its potential side effects-specifically psychomimetic effects. These side effects are directly related to dose amount. The doses used for analgesic purposes are much lower than those used for anesthesia purposes. A literature review was performed to ascertain potential side effects and/or adverse events when using ketamine for analgesia purposes. The search included CINAHL, PubMed, and Ovid using the search terms "ketamine," "ketamine infusion," "pain," "adverse events," "practice guideline," and "randomized controlled trial." Searches were limited to full-text, peer-reviewed articles and systematic reviews. Initially 1,068 articles were retrieved. The search was then narrowed by using the Boolean connector AND with various search term combinations. After adjusting for duplication, article titles and abstracts were reviewed, leaving 25 articles for an in-depth analysis. Specific exclusion criteria were then applied. The literature supports the use of ketamine for analgesic purposes, and ketamine offers a nonopioid option for the management of some pain conditions. Because ketamine is still classified as an anesthetic agent, health care institutions should develop their own set of policies and protocols for the administration of ketamine. By using forethought and understanding of the properties of ketamine, appropriate care may be planned to mitigate potential side effects and adverse events so that patients are appropriately cared for and their pain effectively managed. Copyright © 2017 American Society for Pain Management Nursing. Published by Elsevier Inc. All rights reserved.

Load curve modelling of the residential segment electric power consumption applying a demand side energy management program; Modelagem da curva de carga das faixas de consumo de energia eletrica residencial a partir da aplicacao de um programa de gerenciamento de energia pelo lado da demanda

Energy Technology Data Exchange (ETDEWEB)

Rahde, Sergio Barbosa [Pontificia Univ. Catolica do Rio Grande do Sul, Porto Alegre (Brazil). Dept. de Engenharia Mecanica e Mecatronica]. E-mail: sergio@em.pucrs.br; Kaehler, Jose Wagner [Pontificia Univ. Catolica do Rio Grande do Sul, Porto Alegre (Brazil). Faculdade de Engenharia]. E-mail: kaehlerjw@pucrs.br

2000-07-01

The dissertation aims to offer a current vision on the use of electrical energy inside CEEE's newly defined area of operation. It also intends to propose different alternatives to set up a Demand Side Management (DSM) project to be carried out on the same market segment, through a Residential Load Management program. Starting from studies developed by DNAEE (the Brazilian federal government's agency for electrical energy), to establish the load curve characteristics, as well as from a research on electrical equipment ownership and electricity consumption habits, along with the contribution supplied by other utilities, especially in the US, an evaluation is offered, concerning several approaches to residential energy management, setting up conditions that simulate the residential segment's scenarios and their influence on the general system's load. (author)

Modeling storage and demand management in power distribution grids

International Nuclear Information System (INIS)

Schroeder, Andreas

2011-01-01

Grahical abstract: The model informs an optimal investment sizing decision as regards specific 'smart grid' applications such as storage facilities and meters enabling load control. Results indicate that central storage facilities are a more promising option for generation cost reductions as compared to demand management. Highlights: → Stochastic versus deterministic model increases investment efficiency up to 5%. → Deterministic model under-estimates value of load control and storage. → Battery storage is beneficial at investment cost below 850 EUR/MW h. → Demand management equipment is not beneficial at cost beyond 200 EUR. → The stylized 10 kV grid constitutes no shortage factor. -- Abstract: Storage devices and demand control may constitute beneficial tools to optimize electricity generation with a large share of intermittent resources through inter-temporal substitution of load. This paper quantifies the related cost reductions in a simulation model of a simplified stylized medium-voltage grid (10 kV) under uncertain demand and wind output. Benders Decomposition Method is applied to create a two-stage stochastic optimization program. The model informs an optimal investment sizing decision as regards specific 'smart' applications such as storage facilities and meters enabling load control. Model results indicate that central storage facilities are a more promising option for generation cost reductions as compared to demand management. Grid extensions are not appropriate in any of the scenarios. A sensitivity analysis is applied with respect to the market penetration of uncoordinated Plug-In Electric Vehicles which are found to strongly encourage investment into load control equipment for 'smart' charging and slightly improve the case for central storage devices.

Addressing maternal healthcare through demand side financial incentives: experience of Janani Suraksha Yojana program in India

Directory of Open Access Journals (Sweden)

Gopalan Saji S

2012-09-01

Full Text Available Abstract Background Demand side financing (DSF is a widely employed strategy to enhance utilization of healthcare. The impact of DSF on health care seeking in general and that of maternal care in particular is already known. Yet, its effect on financial access to care, out-of-pocket spending (OOPS and provider motivations is not considerably established. Without such evidence, DSFs may not be recommendable to build up any sustainable healthcare delivery approach. This study explores the above aspects on India’s Janani Suraksha Yojana (JSY program. Methods This study employed design and was conducted in three districts of Orissa, selected through a three-stage stratified sampling. The quantitative method was used to review the Health Management Information System (HMIS. The qualitative methods included focus groups discussions with beneficiaries (n = 19 and community intermediaries (n = 9, and interviews (n = 7 with Ministry of Health officials. HMIS data enabled to review maternal healthcare utilization. Group discussions and interviews explored the perceived impact of JSY on in-facility delivery, OOPS, healthcare costs, quality of care and performance motivation of community health workers. Results The number of institutional deliveries, ante-and post-natal care visits increased after the introduction of JSY with an annual net growth of 18.1%, 3.6% and 5% respectively. The financial incentive provided partial financial risk-protection as it could cover only 25.5% of the maternal healthcare cost of the beneficiaries in rural areas and 14.3% in urban areas. The incentive induced fresh out-of-pocket spending for some mothers and it could not address maternal care requirements comprehensively. An activity-based community worker model was encouraging to augment maternal healthcare consumption. However, the existing level of financial incentives and systemic support were inadequate to motivate the volunteers optimally on their

Impacts of Demand-Side Resources on Electric Transmission Planning

Energy Technology Data Exchange (ETDEWEB)

Hadley, Stanton W. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Sanstad, Alan H. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2015-01-01

Will demand resources such as energy efficiency (EE), demand response (DR), and distributed generation (DG) have an impact on electricity transmission requirements? Five drivers for transmission expansion are discussed: interconnection, reliability, economics, replacement, and policy. With that background, we review the results of a set of transmission studies that were conducted between 2010 and 2013 by electricity regulators, industry representatives, and other stakeholders in the three physical interconnections within the United States. These broad-based studies were funded by the US Department of Energy and included scenarios of reduced load growth due to EE, DR, and DG. While the studies were independent and used different modeling tools and interconnect-specific assumptions, all provided valuable results and insights. However, some caveats exist. Demand resources were evaluated in conjunction with other factors, and limitations on transmission additions between scenarios made understanding the role of demand resources difficult. One study, the western study, included analyses over both 10- and 20-year planning horizons; the 10-year analysis did not show near-term reductions in transmission, but the 20-year indicated fewer transmission additions, yielding a 36percent capital cost reduction. In the eastern study the reductions in demand largely led to reductions in local generation capacity and an increased opportunity for low-cost and renewable generation to export to other regions. The Texas study evaluated generation changes due to demand, and is in the process of examining demand resource impacts on transmission.

The management from the viewpoint of the demand and the institutional and regulatory details at energy industry; O gerenciamento do lado da demanda e as nuances institucionais e regulatorias na industria energetica

Energy Technology Data Exchange (ETDEWEB)

Udaeta, Miguel Edgar Morales; Galvao, Luiz Claudio Ribeiro; Bermann, Celio [Universidade de Sao Paulo (USP), SP (Brazil). Inst. de Eletrotecnica e Energia; Baitelo, Ricardo Lacerda [Universidade de Sao Paulo (GEPEA-USP), SP (Brazil). Escola Politecnica. Dept. de Energia e Automacao Eletricas. Grupo de Energia

2006-07-01

Demand Side Management can be described as any activity focused on demand control or energy efficiency improvement, seeking to alter the quantity and the period of energy use. This paper aims at discussing the main points concerning impacts and barriers in the implementation of DSM policies. This identification intends to discuss these issues and suggest possible alternatives towards the implementation of DSM programs. (author)

Aggregated Demand Modelling Including Distributed Generation, Storage and Demand Response

OpenAIRE

Marzooghi, Hesamoddin; Hill, David J.; Verbic, Gregor

2014-01-01

It is anticipated that penetration of renewable energy sources (RESs) in power systems will increase further in the next decades mainly due to environmental issues. In the long term of several decades, which we refer to in terms of the future grid (FG), balancing between supply and demand will become dependent on demand actions including demand response (DR) and energy storage. So far, FG feasibility studies have not considered these new demand-side developments for modelling future demand. I...

Presenting a multi-objective generation scheduling model for pricing demand response rate in micro-grid energy management

International Nuclear Information System (INIS)

Aghajani, G.R.; Shayanfar, H.A.; Shayeghi, H.

2015-01-01

Highlights: • Using DRPs to cover the uncertainties resulted from power generation by WT and PV. • Proposing the use of price-offer packages and amount of DR for implement DRPs. • Considering a multi-objective scheduling model and use of MOPSO algorithm. - Abstract: In this paper, a multi-objective energy management system is proposed in order to optimize micro-grid (MG) performance in a short-term in the presence of Renewable Energy Sources (RESs) for wind and solar energy generation with a randomized natural behavior. Considering the existence of different types of customers including residential, commercial, and industrial consumers can participate in demand response programs. As with declare their interruptible/curtailable demand rate or select from among different proposed prices so as to assist the central micro-grid control in terms of optimizing micro-grid operation and covering energy generation uncertainty from the renewable sources. In this paper, to implement Demand Response (DR) schedules, incentive-based payment in the form of offered packages of price and DR quantity collected by Demand Response Providers (DRPs) is used. In the typical micro-grid, different technologies including Wind Turbine (WT), PhotoVoltaic (PV) cell, Micro-Turbine (MT), Full Cell (FC), battery hybrid power source and responsive loads are used. The simulation results are considered in six different cases in order to optimize operation cost and emission with/without DR. Considering the complexity and non-linearity of the proposed problem, Multi-Objective Particle Swarm Optimization (MOPSO) is utilized. Also, fuzzy-based mechanism and non-linear sorting system are applied to determine the best compromise considering the set of solutions from Pareto-front space. The numerical results represented the effect of the proposed Demand Side Management (DSM) scheduling model on reducing the effect of uncertainty obtained from generation power and predicted by WT and PV in a MG.

Demand chain management – The implementation

Directory of Open Access Journals (Sweden)

D Ericsson

2011-12-01

Full Text Available Most current supply chain models were developed during a period of relative stability. Today, the environment is discontinuous, volatile and unpredictable. This requires a major rethinking and revitalisation of existing supply chain models. Supply chains are much more than warehouses, transportation and technology, they are people powered and have to be treated as social and political as well as economic and technical systems.The most difficult yet challenging and rewarding factor is the change of mindset from approaches based on the old industrial paradigm to the new knowledge oriented paradigm. From "one size fits all" to customisation and buyer behaviour oriented segmentation based on structural flexibility. The new approach requires a change of processes and management systems, but most of all, a change of mindset, organisation structure and behaviour.This may create internal resistance that has to be overcome to reach the desired future state. This future state is highly dependent on cooperation and consensus with external companies, and the next step is therefore to extend the alignment approach to the chosen partners in the demand chain. The development towards channel rather than company competition requires an interorganisational approach to channel design. Internal alignment and cooperation is necessary but not sufficient, which means that an agile and dynamically aligned demand chain has to be created.All this is well known and documented in both research and theory. However, the challenge is to implement these theories, models and behaviour in practice. This paper presents one practical approach to implementation of the theories put forth by Ericsson [Ericsson D, 2011, Demand chain management - The evolution, ORiON, 27(1, pp. 45-81.].

Demand-Side Financing--A Focus on Vouchers in Post-Compulsory Education and Training: Discussion Paper and Case Studies. CEDEFOP Dossier.

Science.gov (United States)

West, Anne; Sparkes, Jo; Balabanov, Todor

The use of demand-side financing mechanisms and vouchers for postcompulsory secondary-level education was examined through case studies of funding practices in the following countries: Austria; France; the United Kingdom; the United States; and Wallonia (the French community of Belgium). Different models of voucher use were identified in the…

Stimulation of demand response through evaluation and training

International Nuclear Information System (INIS)

Encinas, N.; Alfonso, D.; Alvarez, C.; Mendez, C.; Rodriguez, J.; Perez-Navarro, A.; Gabaldon, A.

2004-01-01

The objective of Demand Response is to enhance customer choice opportunities by means of price-responsive mechanisms in contrast to direct load control practices and associated revenues based on fixed incentives. In this way, the new approach complements the traditional concept of Demand Side Management by including the voluntary nature to customer participation. This voluntary feature implies a change in customers' traditional behaviour and therefore stimulation and training is needed to achieve an optimal participation. This paper presents a methodology developed to stimulate and train customers for Demand Response practices as well as to identify the suitable products for different customers. Finally, the paper includes an example of the methodology considering a university as a customer. (au)

Supply- and Demand-Side Factors Influencing Utilization of Infant and Young Child Feeding Counselling Services in Viet Nam.

Science.gov (United States)

Nguyen, Phuong H; Kim, Sunny S; Nguyen, Tuan T; Tran, Lan M; Hajeebhoy, Nemat; Frongillo, Edward A; Ruel, Marie T; Rawat, Rahul; Menon, Purnima

2016-01-01

Adequate utilization of services is critical to maximize the impact of counselling on infant and young child feeding (IYCF), but little is known about factors affecting utilization. Our study examined supply- and demand-side factors associated with the utilization of IYCF counselling services in Viet Nam. We used survey data from mothers with children Viet Nam, and may be relevant for increasing and sustaining use of nutrition services in similar contexts.

A Masters Programme in Telecommunications Management--Demand-Based Curriculum Design

Science.gov (United States)

Gharaibeh, Khaled M.; Kaylani, Hazem; Murphy, Noel; Brennan, Conor; Itradat, Awni; Al-Bataineh, Mohammed; Aloqlah, Mohammed; Salhieh, Loay; Altarazi, Safwan; Rawashdeh, Nathir; del Carmen Bas Cerdá, María; Conchado Peiró, Andrea; Al-Zoubi, Asem; Harb, Bassam; Bany Salameh, Haythem

2015-01-01

This paper presents a curriculum design approach for a Masters Programme in Telecommunications Management based on demand data obtained from surveying the needs of potential students of the proposed programme. Through online surveys disseminated at telecom companies in Jordan, it was possible to measure the demand for such a programme and to…

Decomposition of toxicity emission changes on the demand and supply sides: empirical study of the US industrial sector

Science.gov (United States)

Fujii, Hidemichi; Okamoto, Shunsuke; Kagawa, Shigemi; Managi, Shunsuke

2017-12-01

This study investigated the changes in the toxicity of chemical emissions from the US industrial sector over the 1998-2009 period. Specifically, we employed a multiregional input-output analysis framework and integrated a supply-side index decomposition analysis (IDA) with a demand-side structural decomposition analysis (SDA) to clarify the main drivers of changes in the toxicity of production- and consumption-based chemical emissions. The results showed that toxic emissions from the US industrial sector decreased by 83% over the studied period because of pollution abatement efforts adopted by US industries. A variety of pollution abatement efforts were used by different industries, and cleaner production in the mining sector and the use of alternative materials in the manufacture of transportation equipment represented the most important efforts.

Visualized study on specific points on demand curves and flow patterns in a single-side heated narrow rectangular channel

International Nuclear Information System (INIS)

Wang Junfeng; Huang Yanping; Wang Yanlin

2011-01-01

Highlights: → Specific points on the demand curve and flow patterns are visually studied. → Bubbly, churn, and annular flows were observed. → Onset of flow instability and bubbly-churn transition occurs at the same time. → The evolution of specific points and flow pattern transitions were examined. - Abstract: A simultaneous visualization and measurement study on some specific points on demand curves, such as onset of nucleate boiling (ONB), onset of significant void (OSV), onset of flow instability (OFI), and two-phase flow patterns in a single-side heated narrow rectangular channel, having a width of 40 mm and a gap of 3 mm, was carried out. New experimental approaches were adopted to identify OSV and OFI in a narrow rectangular channel. Under experimental conditions, the ONB could be predicted well by the Sato and Matsumura model. The OSV model of Bowring can reasonably predict the OSV if the single-side heated condition is considered. The OFI was close to the saturated boiling point and could be described accurately by Kennedy's correlation. The two-phase flow patterns observed in this experiment could be classified into bubbly, churn, and annular flow. Slug flow was never observed. The OFI always occurred when the bubbles at the channel exit began to coalesce, which corresponded to the beginning of the bubbly-churn transition in flow patterns. Finally, the evolution of specific points and flow pattern transitions were examined in a single-side heated narrow rectangular channel.

A System Dynamics Modeling of Water Supply and Demand in Las Vegas Valley

Science.gov (United States)

Parajuli, R.; Kalra, A.; Mastino, L.; Velotta, M.; Ahmad, S.

2017-12-01

The rise in population and change in climate have posed the uncertainties in the balance between supply and demand of water. The current study deals with the water management issues in Las Vegas Valley (LVV) using Stella, a system dynamics modeling software, to model the feedback based relationship between supply and demand parameters. Population parameters were obtained from Center for Business and Economic Research while historical water demand and conservation practices were modeled as per the information provided by local authorities. The water surface elevation of Lake Mead, which is the prime source of water supply to the region, was modeled as the supply side whereas the water demand in LVV was modeled as the demand side. The study was done from the period of 1989 to 2049 with 1989 to 2012 as the historical one and the period from 2013 to 2049 as the future period. This study utilizes Coupled Model Intercomparison Project data sets (2013-2049) (CMIP3&5) to model different future climatic scenarios. The model simulates the past dynamics of supply and demand, and then forecasts the future water budget for the forecasted future population and future climatic conditions. The results can be utilized by the water authorities in understanding the future water status and hence plan suitable conservation policies to allocate future water budget and achieve sustainable water management.

Foundation and economic consistency framework for demand side management actions

International Nuclear Information System (INIS)

Tabet, J.P.

1994-01-01

Since the first oil crisis, energy management constitutes one of the main lines of France's energy policy, together with the development of the national supply and the diversification of the origin of imported energy products. The priority given to petroleum product savings, the effort already made in the field of electro technologies and rational use of electricity, and the temporary surplus of nuclear generation capacity have resulted in less attention given by the players to energy conservation concerning electricity uses, or at least take this into account mainly for competitive uses. The evolution of the stakes involved makes it necessary today to re-examine the role of electricity DSM in the French energy system. This should be done particularly by identifying, through experimentation, the potentials and methods of electricity DSM programs that are desirable from the economic, social and environmental viewpoint. (au)

Managing Change: the people side of implementing CRM processes

OpenAIRE

Hann, David

2006-01-01

This report has been produced with the remit of analysing the people side of change management with regard to a Customer Relationship Management (CRM) process implementation at Jupiter Design (Jupiter). An increasing churn of clients and 12- years of growth has made Jupiter realise they must maximise revenues from existing clients. The adoption of a CRM approach has been suggested as a possible solution.

Smart Buildings and Demand Response

Science.gov (United States)

Kiliccote, Sila; Piette, Mary Ann; Ghatikar, Girish

2011-11-01

Advances in communications and control technology, the strengthening of the Internet, and the growing appreciation of the urgency to reduce demand side energy use are motivating the development of improvements in both energy efficiency and demand response (DR) systems in buildings. This paper provides a framework linking continuous energy management and continuous communications for automated demand response (Auto-DR) in various times scales. We provide a set of concepts for monitoring and controls linked to standards and procedures such as Open Automation Demand Response Communication Standards (OpenADR). Basic building energy science and control issues in this approach begin with key building components, systems, end-uses and whole building energy performance metrics. The paper presents a framework about when energy is used, levels of services by energy using systems, granularity of control, and speed of telemetry. DR, when defined as a discrete event, requires a different set of building service levels than daily operations. We provide examples of lessons from DR case studies and links to energy efficiency.

Demand management: another marketing tool or a way to quality care?

Science.gov (United States)

Mohler, M J; Harris, J M

1998-05-01

Demand management tools are population-based strategies used to control costs and improve utilization of services by assisting health consumers in maintaining their health and seeking appropriate health care. These tools are increasingly used by health care delivery systems and, in the US, by fiscal intermediaries, such as insurance companies. If these tools are not properly applied, there is a clear possibility that their use may lead a reduction of health care services with no improvement in clinical, humanistic, or economic outcomes. Demand management effectiveness has not been rigorously examined by the medical industry or academia. Before adopting or purchasing demand management technologies, health care systems should examine them carefully to determine how the tools were developed and who they were intended to serve. Once implemented, careful tracking of population outcomes is as necessary with these technologies as with any other technologies that can affect health care.

CRISP. Market-oriented online supply-demand matching

International Nuclear Information System (INIS)

Kamphuis, I.G.; Kester, J.C.P.; Carlsson, P; Akkermans, H.

2004-04-01

Current power distribution systems are operated in a top-down manner. Power production control and price formation take place on a central level on the basis of relatively static data from a data collection and dispatching network with a limited scope and granularity. When incorporating a more considerable fraction of small-scale producers on the basis of, for instance, renewable energy, operation of the distribution grid requires more data to be collected from a more extensive information and data communication network. Furthermore, increased local flows, in the form of two-way communication with distributed computation techniques, enable a more dynamic adaptation in power supply and demand patterns paving the way to a flexible way of embedding of ill-predictable supply of some types of renewable energy sources. DSM-programs have been in use in the utility sector for years now. In this document, first, current Demand Side Management (DSM) and Demand Response Resource (DRR) techniques are discussed; then, supply side management especially in a DG (Distributed Generation) context is treated. A framework of novel concepts and possible technology directions is presented subsequently and some preliminary scenarios are shown to illustrate these concepts. An overview of more flexible supply and demand matching schemes is given essentially based on four distinct types of SDM clusters. It appears, that it is possible to fulfil requirements for these distributed environments in terms of needed information and communication technology, ICT, if these are paralleled with the expected future penetration of ever-smaller scale data-exchange networks at power customer sites. Agent technology using algorithms from micro-economic market theory offers a promising possibility for managing the complexity of price formation and supply demand matching in these fine-grained bottom-up control distribution networks. Implication of these technical developments in terms of market and business

Analytical optimization of demand management strategies across all urban water use sectors

Science.gov (United States)

Friedman, Kenneth; Heaney, James P.; Morales, Miguel; Palenchar, John

2014-07-01

An effective urban water demand management program can greatly influence both peak and average demand and therefore long-term water supply and infrastructure planning. Although a theoretical framework for evaluating residential indoor demand management has been well established, little has been done to evaluate other water use sectors such as residential irrigation in a compatible manner for integrating these results into an overall solution. This paper presents a systematic procedure to evaluate the optimal blend of single family residential irrigation demand management strategies to achieve a specified goal based on performance functions derived from parcel level tax assessor's data linked to customer level monthly water billing data. This framework is then generalized to apply to any urban water sector, as exponential functions can be fit to all resulting cumulative water savings functions. Two alternative formulations are presented: maximize net benefits, or minimize total costs subject to satisfying a target water savings. Explicit analytical solutions are presented for both formulations based on appropriate exponential best fits of performance functions. A direct result of this solution is the dual variable which represents the marginal cost of water saved at a specified target water savings goal. A case study of 16,303 single family irrigators in Gainesville Regional Utilities utilizing high quality tax assessor and monthly billing data along with parcel level GIS data provide an illustrative example of these techniques. Spatial clustering of targeted homes can be easily performed in GIS to identify priority demand management areas.

Effects of dynamic-demand-control appliances on the power grid frequency

Science.gov (United States)

Tchuisseu, E. B. Tchawou; Gomila, D.; Brunner, D.; Colet, P.

2017-08-01

Power grid frequency control is a demanding task requiring expensive idle power plants to adapt the supply to the fluctuating demand. An alternative approach is controlling the demand side in such a way that certain appliances modify their operation to adapt to the power availability. This is especially important to achieve a high penetration of renewable energy sources. A number of methods to manage the demand side have been proposed. In this work we focus on dynamic demand control (DDC), where smart appliances can delay their switchings depending on the frequency of the system. We introduce a simple model to study the effects of DDC on the frequency of the power grid. The model includes the power plant equations, a stochastic model for the demand that reproduces, adjusting a single parameter, the statistical properties of frequency fluctuations measured experimentally, and a generic DDC protocol. We find that DDC can reduce small and medium-size fluctuations but it can also increase the probability of observing large frequency peaks due to the necessity of recovering pending task. We also conclude that a deployment of DDC around 30-40% already allows a significant reduction of the fluctuations while keeping the number of pending tasks low.

Emergency Management of Malignant Acute Left-Sided Colonic Obstruction

Science.gov (United States)

Trompetas, Vasileios

2008-01-01

INTRODUCTION The management of acute left-sided colonic obstruction still remains a challenging problem despite significant progress. METHODS A literature search was undertaken using PubMed and the Cochrane Library regarding the options in emergency management of left-sided colonic obstruction focusing on outcomes such as mortality, morbidity, long-term prognosis and cost effectiveness. DISCUSSION Colonic stenting is the best option either for palliation or as a bridge to surgery. It reduces morbidity and mortality rate and the need for colostomy formation. Stenting is likely to be cost effective, but data are variable depending on the individual healthcare system. Nevertheless, surgical management remains relevant as colonic stenting has a small rate of failure, and it is not always available. There are various surgical options. One-stage primary resection and anastomosis is the preferred choice for low-risk patients. Intra-operative colonic irrigation has no proven benefit. Subtotal colectomy is useful in cases of proximal bowel damage or synchronous tumours. Hartmann's procedure should be reserved for high-risk patients. Simple colostomy has no role other than for use in very ill patients who are not fit for any other procedure. PMID:18430330

Guide to calculating transportation demand management benefits

Energy Technology Data Exchange (ETDEWEB)

Litman, T. [Victoria Transport Policy Institute, Victoria, BC (Canada)

1997-02-14

The full benefits of transportation demand management (TDM) programs were discussed. TDM includes several policies, programs and measures designed to change travel patterns. TDM programs include commute trip reductions, pricing policies, land use management strategies, and programs to support alternative modes of transportation such as public transit, carpooling, bicycling, walking and telecommuting. In addition to reduction in traffic congestion and reduction in air pollution, other impacts of TDM programs were also evaluated. The value of these impacts based on external cost savings was estimated. A list of documents, software and organizations which could be helpful for TDM planning and evaluation was provided. 34 refs., 14 tabs., 1 fig.

Optimized management of a distributed demand response aggregation model

International Nuclear Information System (INIS)

Prelle, Thomas

2014-01-01

The desire to increase the share of renewable energies in the energy mix leads to an increase in share of volatile and non-controllable energy and makes it difficult to meet the supply-demand balance. A solution to manage anyway theses energies in the current electrical grid is to deploy new energy storage and demand response systems across the country to counterbalance under or over production. In order to integrate all these energies systems to the supply and demand balance process, there are gathered together within a virtual flexibility aggregation power plant which is then seen as a virtual power plant. As for any other power plant, it is necessary to compute its production plan. Firstly, we propose in this PhD thesis an architecture and management method for an aggregation power plant composed of any type of energies systems. Then, we propose algorithms to compute the production plan of any types of energy systems satisfying all theirs constraints. Finally, we propose an approach to compute the production plan of the aggregation power plant in order to maximize its financial profit while complying with all the constraints of the grid. (author)

Burnup credit demands for spent fuel management in Ukraine

International Nuclear Information System (INIS)

Medun, V.

2001-01-01

In fact, till now, burnup credit has not be applied in Ukrainian nuclear power for spent fuel management systems (storage and transport). However, application of advanced fuel at VVER reactors, arising spent fuel amounts, represent burnup credit as an important resource to decrease spent fuel management costs. The paper describes spent fuel management status in Ukraine from viewpoint of subcriticality assurance under spent fuel storage and transport. It also considers: 1. Regulation basis concerning subcriticality assurance, 2. Basic spent fuel and transport casks characteristics, 3. Possibilities and demands for burnup credit application at spent fuel management systems in Ukraine. (author)

8 Different approaches needed to manage ED demand among different age-groups.

Science.gov (United States)

Rimmer, Melanie; Ablard, Suzanne; O'Keeffe, Colin; Mason, Suzanne

2017-12-01

A variety of interventions have been proposed to manage rising demand for Emergency and Urgent Care, described by an NHS England review as unsustainable in the long term. However it is unlikely that any suggested approach will be equally suitable for the diverse population of ED users.We aimed to understand the patterns of demand amongst different types of patients attending ED. We also sought to understand the intended and unintended effects of demand management initiatives. Our study combined insights from routine data, a survey of ED patients, and qualitative interviews with ED staff. This paper describes the results of our analysis of the interviews. We conducted semi-structured interviews with 25 ED and Urgent Care Centre staff across 7 hospital sites in Yorkshire and Humber between 25 April and 11 July 2016. The interview topic guide asked about 4 broad areas; job role, description of patients and their impact on demand, description of inappropriate attendance, and current/future initiatives to deal with rising demand. Interviews were transcribed verbatim and analysed using framework analysis. We analysed the results to identify groups of patients with different patterns of use of ED services. We also explored ED staff experiences of demand management initiatives, and their suggestions for future initiatives. Although we did not ask specifically about patients' age, our analysis revealed that ED staff categorised attenders as children and young people, working age people, and older people. These groups had different reasons for attendance, different routes to the ED, different rate of non-urgent attendance, and different issues driving demand. Staff also described variation in the time taken to treat patients of different ages, with the oldest and youngest patients described as requiring the most time.There was no consensus amongst staff about the effectiveness of initiatives for managing demand. A strikingly wide variety of initiatives were mentioned

Managing Chemotherapy Side Effects: Sexual and Fertility Changes in Women

Science.gov (United States)

N ational C ancer I nstitute Managing Chemotherapy Side Effects Sexual and Fertility Changes in Women “Talk with your doctor before you start treatment. Ask how chemotherapy could affect your ability to have ...

Getting the goods without the bads : freight transportation demand management strategies to reduce urban impacts.

Science.gov (United States)

2013-09-01

This project identifies and evaluatesstrategies to reduce the social costs associated with goods movement in urban areas by managing : transportation demand. Information about various freight transportation demand management (TDM) strategies was gath...

Smart grids, demand-side management and decentralised electricity production: Mounting a national R and D programme

International Nuclear Information System (INIS)

2010-01-01

of investment RTE, ERDF and EDF-R and D dispose of teams that can identify future R and D needs, pilot and conduct research, and integrate the results, often obtained in collaboration with other parties, in innovative demonstration projects set up by operators. This is no longer the case for many of their European counterparts where research teams have shrunk to a minimum, following cost-cutting decisions and 'rationalisation' of grid activities (decisions made on the basis of short-term business policies, often encouraged by regulators 3). These encouraging observations notwithstanding, transmission and distribution grid operators in France consider that they must acquire further knowledge pertaining to the sizing and operation of electricity networks. Five policy options underlie this vision extending to 2020, a vision aimed at validating new directions for the evolution of these networks: 1 - Strengthen the capacity of the transmission grid to integrate an energy bouquet that complies with European commitments for de-carbonising electricity generation, via the development of renewable energy, 2 - Make the distribution grid flexible and reliable enough to meet the consumer demand and the requirements of energy service vendors, 3 - Coordinate interaction between transmission operators and distributors so as to reinforce the reliability of the grid in France, optimise its energy performance and contribute to building the single electricity market in Europe, 4 - Encourage electricity demand management as an additional source of supply and economic competitiveness, 5 - Expand decentralised generation, particularly to help further reduce energy demand in commercial and residential buildings

Managing Chemotherapy Side Effects: Sexual and Fertility Changes in Men

Science.gov (United States)

... I nstitute Managing Chemotherapy Side Effects Sexual and Fertility Changes in Men “I talked with my doctor ... learn what sexual changes or changes to your fertility you may have. The changes you may have ...

Security Services Lifecycle Management in on-demand infrastructure services

NARCIS (Netherlands)

Demchenko, Y.; de Laat, C.; Lopez, D.R.; García-Espín, J.A.; Qiu, J.; Zhao, G.; Rong, C.

2010-01-01

Modern e-Science and high technology industry require high-performance and complicated network and computer infrastructure to support distributed collaborating groups of researchers and applications that should be provisioned on-demand. The effective use and management of the dynamically provisioned

Analysis and design of a Taguchi-Grey based electricity demand predictor for energy management systems

International Nuclear Information System (INIS)

Yao, Albert W.L.; Chi, S.C.

2004-01-01

In order to use electricity efficiently, a demand control management system is one of the effective ways to reduce energy consumption and electric bills. An electricity demand control system is used as a means to monitor and manage the usage of electricity effectively. Moreover, it is a useful tool for avoiding penalties beyond the contracted demand value of electricity with the electric power company. In this project, we developed a Taguchi-Grey based predictor to forecast the demand value of electricity on line. In a Grey prediction, the parameter settings are highly relevant to the accuracy of forecasting. A Taguchi method was employed to optimize the parameter settings for the Grey based electricity demand value predictor. Our experimental results show that the optimal parameter settings of the Grey prediction are α=0.4, five point modeling and three minute sampling time of the data acquisition system. The improved Taguchi-Grey based electricity demand predictor in conjunction with the PC based electricity demand control system is a cost effective and efficient means to manage the usage of electricity

Austria's Energy Perspectives - It's the Demand Side, Stupid

International Nuclear Information System (INIS)

Lechner, H.

2009-01-01

During the last decade Austria made remarkable progress in developing renewable energy sources. But at the same time energy demand has steadily increased so that the share of renewables in the energy mix has remained more or less stable over the years. Rising energy demand and import dependence is also forecast in a business-as-usual scenario for the future. If Austria is to fulfill the EU obligatory target to increase the share of renewables up to 34% in 2020 (recently 25%) and to move on a sustainable, low-carbon track it will have to decrease energy consumption or at least stabilise it at the level of 2005. This requires considerable efforts to boost energy efficiency, especially in the building and transport sector.(author).

Task demand, task management, and teamwork

Energy Technology Data Exchange (ETDEWEB)

Braarud, Per Oeivind; Brendryen, Haavar

2001-03-15

The current approach to mental workload assessment in process control was evaluated in 3 previous HAMMLAB studies, by analysing the relationship between workload related measures and performance. The results showed that subjective task complexity rating was related to team's control room performance, that mental effort (NASA-TLX) was weakly related to performance, and that overall activity level was unrelated to performance. The results support the argument that general cognitive measures, i.e., mental workload, are weakly related to performance in the process control domain. This implies that other workload concepts than general mental workload are needed for valid assessment of human reliability and for valid assessment of control room configurations. An assessment of task load in process control suggested that how effort is used to handle task demand is more important then the level of effort invested to solve the task. The report suggests two main workload related concepts with a potential as performance predictors in process control: task requirements, and the work style describing how effort is invested to solve the task. The task requirements are seen as composed of individual task demand and team demand. In a similar way work style are seen as composed of individual task management and teamwork style. A framework for the development of the concepts is suggested based on a literature review and experiences from HAMMLAB research. It is suggested that operational definitions of workload concepts should be based on observable control room behaviour, to assure a potential for developing performance-shaping factors. Finally an explorative analysis of teamwork measures and performance in one study indicated that teamwork concepts are related to performance. This lends support to the suggested development of team demand and teamwork style as elements of a framework for the analysis of workload in process control. (Author)

Characterising Wildlife Trade Market Supply-Demand Dynamics

Science.gov (United States)

Rowcliffe, M.; Cowlishaw, G.; Alexander, J. S.; Ntiamoa-Baidu, Y.; Brenya, A.; Milner-Gulland, E. J.

2016-01-01

The trade in wildlife products can represent an important source of income for poor people, but also threaten wildlife locally, regionally and internationally. Bushmeat provides livelihoods for hunters, traders and sellers, protein to rural and urban consumers, and has depleted the populations of many tropical forest species. Management interventions can be targeted towards the consumers or suppliers of wildlife products. There has been a general assumption in the bushmeat literature that the urban trade is driven by consumer demand with hunters simply fulfilling this demand. Using the urban bushmeat trade in the city of Kumasi, Ghana, as a case study, we use a range of datasets to explore the processes driving the urban bushmeat trade. We characterise the nature of supply and demand by explicitly considering three market attributes: resource condition, hunter behaviour, and consumer behaviour. Our results suggest that bushmeat resources around Kumasi are becoming increasingly depleted and are unable to meet demand, that hunters move in and out of the trade independently of price signals generated by the market, and that, for the Kumasi bushmeat system, consumption levels are driven not by consumer choice but by shortfalls in supply and consequent price responses. Together, these results indicate that supply-side processes dominate the urban bushmeat trade in Kumasi. This suggests that future management interventions should focus on changing hunter behaviour, although complementary interventions targeting consumer demand are also likely to be necessary in the long term. Our approach represents a structured and repeatable method to assessing market dynamics in information-poor systems. The findings serve as a caution against assuming that wildlife markets are demand driven, and highlight the value of characterising market dynamics to inform appropriate management. PMID:27632169

Designing cost effective water demand management programs in Australia.

Science.gov (United States)

White, S B; Fane, S A

2002-01-01

This paper describes recent experience with integrated resource planning (IRP) and the application of least cost planning (LCP) for the evaluation of demand management strategies in urban water. Two Australian case studies, Sydney and Northern New South Wales (NSW) are used in illustration. LCP can determine the most cost effective means of providing water services or alternatively the cheapest forms of water conservation. LCP contrasts to a traditional approach of evaluation which looks only at means of increasing supply. Detailed investigation of water usage, known as end-use analysis, is required for LCP. End-use analysis allows both rigorous demand forecasting, and the development and evaluation of conservation strategies. Strategies include education campaigns, increasing water use efficiency and promoting wastewater reuse or rainwater tanks. The optimal mix of conservation strategies and conventional capacity expansion is identified based on levelised unit cost. IRP uses LCP in the iterative process, evaluating and assessing options, investing in selected options, measuring the results, and then re-evaluating options. Key to this process is the design of cost effective demand management programs. IRP however includes a range of parameters beyond least economic cost in the planning process and program designs, including uncertainty, benefit partitioning and implementation considerations.

Coupling Agent-Based and Groundwater Modeling to Explore Demand Management Strategies for Shared Resources

Science.gov (United States)

Al-Amin, S.

2015-12-01

Municipal water demands in growing population centers in the arid southwest US are typically met through increased groundwater withdrawals. Hydro-climatic uncertainties attributed to climate change and land use conversions may also alter demands and impact the replenishment of groundwater supply. Groundwater aquifers are not necessarily confined within municipal and management boundaries, and multiple diverse agencies may manage a shared resource in a decentralized approach, based on individual concerns and resources. The interactions among water managers, consumers, and the environment influence the performance of local management strategies and regional groundwater resources. This research couples an agent-based modeling (ABM) framework and a groundwater model to analyze the effects of different management approaches on shared groundwater resources. The ABM captures the dynamic interactions between household-level consumers and policy makers to simulate water demands under climate change and population growth uncertainties. The groundwater model is used to analyze the relative effects of management approaches on reducing demands and replenishing groundwater resources. The framework is applied for municipalities located in the Verde River Basin, Arizona that withdraw groundwater from the Verde Formation-Basin Fill-Carbonate aquifer system. Insights gained through this simulation study can be used to guide groundwater policy-making under changing hydro-climatic scenarios for a long-term planning horizon.

An Appreciative View of the Brighter Side of Terror Management Processes

Directory of Open Access Journals (Sweden)

Kenneth E. Vail, III

2015-10-01

Full Text Available Physical death is an inevitable part of life. From the perspective of terror management theory (TMT, people’s efforts to manage the awareness of death can sometimes have harmful social consequences. However, those negative consequences are merely one side of the existential coin. In considering the other side of the coin, the present article highlights the more beneficial trajectories of the terror management process. For example, the awareness of mortality can motivate people to prioritize their physical health; uphold prosocial values; build loving relationships and peaceful, charitable communities; and foster open-mindedness. Further, the article explores the possible balance between defense and growth motivations, including the motivations toward integrative self-expansion, creativity, and well-being. And finally, we tentatively consider the potential positive impacts of direct confrontations with mortality on terror management processes. In sum, the present analysis suggests that although death awareness can sometimes produce some harmful outcomes, at least under certain conditions it can also motivate attitudes and behaviors that have positive personal and social consequences.

Influence of the Type of Marking and the Number of Players on Physiological and Physical Demands During Sided Games in Soccer

Directory of Open Access Journals (Sweden)

Casamichana David

2015-09-01

Full Text Available The aim of this research was to examine the influence of two variables, the type of marking (with or without man-marking and the number of players per team (3, 6, or 9 on the physical and physiological demands of sided games in soccer. Eighteen amateur players were monitored with GPS and heart rate devices. The following variables were analyzed: a maximum heart rate, a mean heart rate, time spent in each intensity range, total distance covered and distance covered in different speed ranges, a player load, maximum speed reached, and a work:rest ratio. The results showed that the type of marking influenced the physical demands of players, with greater total distance, a player load and a work:rest ratio when man-marking was used in the 3 vs. 3 (737 m, 95 Arbitrary Units (AU and 3.4 AU, respectively and 6 vs. 6 (783 m, 95 AU and 5.3 AU, respectively games (p<0.05. The number of players also had an effect on physiological intensity, with more time being spent at the <80%HRmax during the 9 vs. 9 and 6 vs. 6 games (more than 30% compared with the 3 vs. 3 format (less than 15% (p<0.05. These findings could help coaches to understand how the modification of different variables in sided games influences the physical and physiological demands of players.

Electricity Crisis and Load Management in Bangladesh

Directory of Open Access Journals (Sweden)

Rajib Kanti Das

2012-09-01

Full Text Available Bangladesh is a densely populated country. Only a small part of her area is electrified which cover around 18% of total population. The people who are in the electrified area are suffering from severe load shedding. A systematic load management procedure related to demand side may improve the situation is the research problem. The major objectives serve by the research are to analyze contemporary electricity status with a view to drawing inference about demand supply gap and extracting benefits from load management. Data supplied by the Bangladesh Power Development Board, World Bank and outcome of survey are analyzed with some simple statistical tools to test the hypothesis. Analysis discloses that with properly managed uses of electricity with load switch and rotation week-end can improve the concurrent condition of electricity. Moreover, introducing smart distribution system, reducing system loss, shifting load to off-peak, large scale use of prepaid mete, observing energy week and using energy efficient home and office appliance are recommended to improve load through demand side management. Some other recommendations such as introducing alternative energy, public private partnership and using renewable energy development and producing energy locally are made for load management from the supply side.

Safety behavior: Job demands, job resources, and perceived management commitment to safety.

Science.gov (United States)

Hansez, Isabelle; Chmiel, Nik

2010-07-01

The job demands-resources model posits that job demands and resources influence outcomes through job strain and work engagement processes. We test whether the model can be extended to effort-related "routine" safety violations and "situational" safety violations provoked by the organization. In addition we test more directly the involvement of job strain than previous studies which have used burnout measures. Structural equation modeling provided, for the first time, evidence of predicted relationships between job strain and "routine" violations and work engagement with "routine" and "situational" violations, thereby supporting the extension of the job demands-resources model to safety behaviors. In addition our results showed that a key safety-specific construct 'perceived management commitment to safety' added to the explanatory power of the job demands-resources model. A predicted path from job resources to perceived management commitment to safety was highly significant, supporting the view that job resources can influence safety behavior through both general motivational involvement in work (work engagement) and through safety-specific processes.

Differences in strength and speed demands between 4v4 and 8v8 small-sided football games

DEFF Research Database (Denmark)

Rebelo, António Natal Campos; Silva, Pedro; Rago, Vincenzo

2016-01-01

The aims of this study were (i) to characterise the acceleration demands of two different formats of small-sided game (SSG), i.e., 4v4 + goalkeepers (4v4 + GK) and 8v8 + goalkeepers (8v8 + GK); (ii) to analyse the correlation between performance in power-based tests and acceleration-based physica...... to repetitions and fatigue development of muscle power-based actions than 8v8 + GK. It may therefore be logical to use the former type of SSG to target development of power-related football actions....

Can demand-side policies stop the tobacco industry's damage? Lessons from Turkey.

Science.gov (United States)

Gultekin-Karakas, Derya

2015-01-01

Trade and investment liberalisation in the post-1980 period allowed the penetration of transnational tobacco companies into the Turkish market. State control over the market was gradually removed and tobacco farming, manufacturing, trade and consumption were reshaped in line with the needs of transnational tobacco companies. The resultant increase in product proliferation and aggressive marketing strategies led to a dramatic rise in cigarette consumption in the 1990s, making Turkey a market with one of the sharpest consumption increases in the world. While Turkey implemented demand-side tobacco control policies to reduce consumption after 1996, it continued to stimulate manufacturing and trade in a conflicting way. The Turkish case verifies that the liberalisation process facilitated by the state under the auspices of international institutions conflicts with tobacco control. Liberalisation paves the way for market expansions of transnational tobacco companies that resist tobacco control in their drive for profit. Current global tobacco control policies, with no interest in controlling manufacturing, have limited effect on consumption. The Turkish case indicates the necessity of establishing public control over tobacco manufacturing and trade from a public health perspective.

Demand management through centralized control system using power line communication for existing buildings

International Nuclear Information System (INIS)

Al-Mulla, A.; ElSherbini, A.

2014-01-01

Highlights: • A pilot system was developed for demand management of equipment in buildings. • The networking was based on LonWorks platform and power line communication. • Demand strategies led to load reductions up to 74% and energy savings up to 25%. • The peak load reduction is expected to reach 3.44 GW by the year 2030. - Abstract: Managing peak demand efficiently is vital for maintaining uninterrupted supply of electrical power by utility providers. In this work, a pilot system was developed for managing and controlling the demand of major power consuming equipment in buildings from a central server, while relying mostly on existing infrastructure and maintaining consumer comfort. The system was successfully demonstrated on a selected group of buildings using the LonWorks networking platform. At the building level, the system utilized power line and twisted pair communication to control the thermostats of air-conditioning (A/C) units. The higher level communication was executed through extensible markup language (XML) and simple object access protocol (SOAP). The system provided control capabilities based on A/C unit priority, thermostat temperature, building type and geographic location. The development and execution of demand management strategies for selected buildings led to peak load reductions up to 74%, in addition to energy savings up to 25%. Implementing such a system at a national level in Kuwait is estimated to reduce peak demand by 3.44 GW, amounting to capital savings of $4.13 billion. The use of existing infrastructure reduced the cost and installation time of the system. Based on the successful testing of this pilot system, a larger-scale system is being developed

A model to assess water tariffs as part of water demand management

African Journals Online (AJOL)

Keywords: water demand management, price elasticity, change in water tariff, block tariff, WC/WDM model. INTRODUCTION ... ever developed for a 6-block pricing structure and allows for limited available input data from ..... Payment Strategies and Price Elasticity of Demand for Water for. Different revenue Groups in Three ...

Energy Supply and Demand Planning Aspects in Slovenia

International Nuclear Information System (INIS)

Tomsic, M.; Urbancic, A.; Al Mansour, F.; Merse, S.

1997-01-01

Slovenia can be considered a sufficiently homogenous region, even though specific climatic conditions exist in some parts of the country. Urban regions with high energy consumptions density differ in logistic aspects and in the potential of renewable energy sources. The difference in household energy demand is not significant. The planning study is based on the ''Integrated Resource Planning'' approach. A novel energy planning tool, the MESAP-PlaNet energy system model, supplemented by auxiliary models of technology penetration, electricity demand analysis and optimal expansion planning (the WASP package) has been used. The following segments has been treated in detail: industry, households and both central and local supply systems. Three intensities of energy efficiency strategies are compared: Reference, Moderate and Intensive. The intensity of demand side management programs influence the level and dynamics of activation of conservation potentials. Energy tax is considered in the Moderate and Intensive strategies. On the supply side the issue of domestic coal use is discussed. Reduction in the use of coal is linked to energy efficiency strategies. It has been found that energy efficiency strategies consistently improve economic efficiency, security of supply and protection of health and environment. The only conflicting area is social acceptability, due to both the energy tax reform and the loss of mining jobs. (author)

Optimal Energy Management of Combined Cooling, Heat and Power in Different Demand Type Buildings Considering Seasonal Demand Variations

Directory of Open Access Journals (Sweden)

Akhtar Hussain

2017-06-01

Full Text Available In this paper, an optimal energy management strategy for a cooperative multi-microgrid system with combined cooling, heat and power (CCHP is proposed and has been verified for a test case of building microgrids (BMGs. Three different demand types of buildings are considered and the BMGs are assumed to be equipped with their own combined heat and power (CHP generators. In addition, the BMGs are also connected to an external energy network (EEN, which contains a large CHP, an adsorption chiller (ADC, a thermal storage tank, and an electric heat pump (EHP. By trading the excess electricity and heat energy with the utility grid and EEN, each BMG can fulfill its energy demands. Seasonal energy demand variations have been evaluated by selecting a representative day for the two extreme seasons (summer and winter of the year, among the real profiles of year-round data on electricity, heating, and cooling usage of all the three selected buildings. Especially, the thermal energy management aspect is emphasized where, bi-lateral heat trading between the energy supplier and the consumers, so-called energy prosumer concept, has been realized. An optimization model based on mixed integer linear programming has been developed for minimizing the daily operation cost of the EEN while fulfilling the energy demands of the BMGs. Simulation results have demonstrated the effectiveness of the proposed strategy.

Alternative Transportation System Demand Estimation for Federal Land Management Agencies.

Science.gov (United States)

2011-09-30

Estimating travel demand for alternative transportation systems (ATS) is challenging in any context, but is even more daunting for Federal Land Management Agencies (FLMAs). Federal public land sites vary widely in their characteristics. Moreover, tra...

Optimisation of key performance measures in air cargo demand management

OpenAIRE

Alexander May; Adrian Anslow; Udechukwu Ojiako; Yue Wu; Alasdair Marshall; Maxwell Chipulu

2014-01-01

This article sought to facilitate the optimisation of key performance measures utilised for demand management in air cargo operations. The focus was on the Revenue Management team at Virgin Atlantic Cargo and a fuzzy group decision-making method was used. Utilising intelligent fuzzy multi-criteria methods, the authors generated a ranking order of ten key outcome-based performance indicators for Virgin Atlantic air cargo Revenue Management. The result of this industry-driven study showed that ...

Demand response in energy markets

International Nuclear Information System (INIS)

Skytte, K.; Birk Mortensen, J.

2004-11-01

Improving the ability of energy demand to respond to wholesale prices during critical periods of the spot market can reduce the total costs of reliably meeting demand, and the level and volatility of the prices. This fact has lead to a growing interest in the short-run demand response. There has especially been a growing interest in the electricity market where peak-load periods with high spot prices and occasional local blackouts have recently been seen. Market concentration at the supply side can result in even higher peak-load prices. Demand response by shifting demand from peak to base-load periods can counteract the market power in the peak-load. However, demand response has so far been modest since the current short-term price elasticity seems to be small. This is also the case for related markets, for example, green certificates where the demand is determined as a percentage of the power demand, or for heat and natural gas markets. This raises a number of interesting research issues: 1) Demand response in different energy markets, 2) Estimation of price elasticity and flexibility, 3) Stimulation of demand response, 4) Regulation, policy and modelling aspects, 5) Demand response and market power at the supply side, 6) Energy security of supply, 7) Demand response in forward, spot, ancillary service, balance and capacity markets, 8) Demand response in deviated markets, e.g., emission, futures, and green certificate markets, 9) Value of increased demand response, 10) Flexible households. (BA)

Data Science in Supply Chain Management: Data-Related Influences on Demand Planning

Science.gov (United States)

Jin, Yao

2013-01-01

Data-driven decisions have become an important aspect of supply chain management. Demand planners are tasked with analyzing volumes of data that are being collected at a torrential pace from myriad sources in order to translate them into actionable business intelligence. In particular, demand volatilities and planning are vital for effective and…

Supplies should match growing demand

International Nuclear Information System (INIS)

Rasmusen, H.J.

1997-01-01

The natural gas industry is currently enjoying healthy growth prospects. Not only is the demand for natural gas steadily growing; the outlook for increasing gas reserves is promising as well. The success of natural gas in the marketplace reflects, on one hand, continuous attention paid to public and customer requirements and, on the other hand, the ability of the gas industry to direct technological developments toward the increasing public demand for gas at competitive market prices supplied in a reliable, safe and environmentally friendly manner. In the past, the gas industry has been involved in the development of technologies for everything from gas production to the end user and from borehole to burner tip, and the author believes that the industry must continue or even increase its emphasis on technology in the future in order to capture new market opportunities. He explains this by looking at the supply side, the demand side and the structural side of the business

Resource Management in Diffserv On DemAnd (RODA) PHR

NARCIS (Netherlands)

Westberg, L.; Jacobsson, M.; de Kogel, M.; Oosthoek, S.; Partain, D.; Rexhepi, V.; Wallentin, P.; Karagiannis, Georgios

The purpose of this draft is to present the Resource Management in Diffserv (RMD) On DemAnd (RODA) Per Hop Reservation (PHR) protocol. The RODA PHR protocol is used on a per-hop basis in a Differentiated Services (Diffserv) domain and extends the Diffserv Per Hop Behavior (PHB) with resource

Daily Use of Energy Management Strategies and Occupational Well-being: The Moderating Role of Job Demands

Directory of Open Access Journals (Sweden)

Stacey L. Parker

2017-08-01

Full Text Available We examine the relationships among employees’ use of energy management strategies and two occupational well-being outcomes: job satisfaction and emotional exhaustion. Based on conservation of resources theory, it was hypothesized that employees with high job demands would benefit more from using energy management strategies (i.e., including prosocial, organizing, and meaning-related strategies, compared to employees with low job demands. We tested this proposition using a quantitative diary study. Fifty-four employees provided data twice daily across one work week (on average, 7 daily entries. Supporting the hypotheses, prosocial energy management was positively related to job satisfaction. Moreover, employees with high job demands were less emotionally exhausted when using prosocial strategies. Contrary to predictions, when using organizing strategies, employees with low job demands had higher job satisfaction and lower emotional exhaustion. Under high job demands, greater use of organizing strategies was associated with lower job satisfaction and higher emotional exhaustion. Finally, use of meaning-related strategies was associated with higher emotional exhaustion when job demands were low. With this research, we position energy management as part of a resource investment process aimed at maintaining and improving occupational well-being. Our findings show that this resource investment will be more or less effective depending on the type of strategy used and the existing drain on resources (i.e., job demands. This is the first study to examine momentary effects of distinct types of work-related energy management strategies on occupational well-being.

Daily Use of Energy Management Strategies and Occupational Well-being: The Moderating Role of Job Demands.

Science.gov (United States)

Parker, Stacey L; Zacher, Hannes; de Bloom, Jessica; Verton, Thomas M; Lentink, Corine R

2017-01-01

We examine the relationships among employees' use of energy management strategies and two occupational well-being outcomes: job satisfaction and emotional exhaustion. Based on conservation of resources theory, it was hypothesized that employees with high job demands would benefit more from using energy management strategies (i.e., including prosocial, organizing, and meaning-related strategies), compared to employees with low job demands. We tested this proposition using a quantitative diary study. Fifty-four employees provided data twice daily across one work week (on average, 7 daily entries). Supporting the hypotheses, prosocial energy management was positively related to job satisfaction. Moreover, employees with high job demands were less emotionally exhausted when using prosocial strategies. Contrary to predictions, when using organizing strategies, employees with low job demands had higher job satisfaction and lower emotional exhaustion. Under high job demands, greater use of organizing strategies was associated with lower job satisfaction and higher emotional exhaustion. Finally, use of meaning-related strategies was associated with higher emotional exhaustion when job demands were low. With this research, we position energy management as part of a resource investment process aimed at maintaining and improving occupational well-being. Our findings show that this resource investment will be more or less effective depending on the type of strategy used and the existing drain on resources (i.e., job demands). This is the first study to examine momentary effects of distinct types of work-related energy management strategies on occupational well-being.

Effective Management of High-Use/High-Demand Space Using Restaurant-Style Pagers

Science.gov (United States)

Gonzalez, Adriana

2012-01-01

The library landscape is changing at a fast pace, with an increase in the demand for study space including quiet, individualized study space; open group study space; and as enclosed group study space. In large academic libraries, managing limited high-demand resources is crucial and is partially being driven by the greater emphasis on group…

A demand-side approach to the optimal deployment of electric vehicle charging stations in metropolitan areas

International Nuclear Information System (INIS)

Andrenacci, N.; Ragona, R.; Valenti, G.

2016-01-01

Highlights: • A demand-side approach to the location of charging infrastructure problem is discussed in the paper. • The analysis is based on a large data-set of private vehicle travels within the urban area of Rome. • Cluster analysis is applied to the data to find the optimal location zones for charging infrastructures. • The daily energy demand and the average number of users per day are calculated for each and every charging infrastructure. - Abstract: Despite all the acknowledged advantages in terms of environmental impact reduction, energy efficiency and noise reduction, the electric mobility market is below expectations. In fact, electric vehicles have limitations that pose several important challenges for achieving a sustainable mobility system: among them, the availability of an adequate charging infrastructure is recognized as a fundamental requirement and appropriate approaches to optimize public and private investments in this field are to be delineated. In this paper we consider actual data on conventional private vehicle usage in the urban area of Rome to carry out a strategy for the optimal allocation of charging infrastructures into portions (subareas) of the urban area, based on an analysis of a driver sample under the assumption of a complete switch to an equivalent fleet of electric vehicles. Moreover, the energy requirement for each one of the subareas is estimated in terms of the electric energy used by the equivalent fleet of electric vehicles to reach their destination. The model can be easily generalized to other problems regarding facility allocation based on user demand.

Unlocking the potential for efficiency and demand response throughadvanced metering

Energy Technology Data Exchange (ETDEWEB)

Levy, Roger; Herter, Karen; Wilson, John

2004-06-30

Reliance on the standard cumulative kilowatt-hour meter substantially compromises energy efficiency and demand response programs. Without advanced metering, utilities cannot support time-differentiated rates or collect the detailed customer usage information necessary to (1)educate the customer to the economic value of efficiency and demand response options, or (2) distribute load management incentives proportional to customer contribution. These deficiencies prevent the customer feedback mechanisms that would otherwise encourage economically sound demand-side investments and behaviors. Thus, the inability to collect or properly price electricity usage handicaps the success of almost all efficiency and demand response options. Historically, implementation of the advanced metering infrastructure (AMI) necessary for the successful efficiency and demand response programs has been prevented by inadequate cost-benefit analyses. A recent California effort has produced an expanded cost-effectiveness methodology for AMI that introduces previously excluded benefits. In addition to utility-centric costs and benefits, the new model includes qualitative and quantitative costs and benefits that accrue to both customers and society.

Short-Run and Long-Run Elasticities of Diesel Demand in Korea

Directory of Open Access Journals (Sweden)

Seung-Hoon Yoo

2012-11-01

Full Text Available This paper investigates the demand function for diesel in Korea covering the period 1986–2011. The short-run and long-run elasticities of diesel demand with respect to price and income are empirically examined using a co-integration and error-correction model. The short-run and long-run price elasticities are estimated to be −0.357 and −0.547, respectively. The short-run and long-run income elasticities are computed to be 1.589 and 1.478, respectively. Thus, diesel demand is relatively inelastic to price change and elastic to income change in both the short-run and long-run. Therefore, a demand-side management through raising the price of diesel will be ineffective and tightening the regulation of using diesel more efficiently appears to be more effective in Korea. The demand for diesel is expected to continuously increase as the economy grows.

Demand side management of electric car charging

DEFF Research Database (Denmark)

Finn, P.; Fitzpatrick, C.; Connolly, David

2012-01-01

the purchase of alternative energy vehicles in an effort to achieve 10% EV (electric vehicle) penetration in the country's road fleet by 2020. The replacement of ICE (internal combustion engine) vehicles with EV equivalents poses challenges for grid operators while simultaneously offering opportunities...

Demand Side Management in the Smart Grid

DEFF Research Database (Denmark)

Costanzo, Giuseppe Tommaso

. Therefore it does not guarantee optimality in the long run. Two approaches are investigated within predictive control: the first is based on grey-box modelling and quadratic Model Predictive Control (MPC), while the second is based on Artificial Intelligence modelling and gradient-free optimisation......, together with the growing urbanisation, the in- creasing popularity of electricity-based climate control systems and electricity-based private transportation, challenges the distribution systems operators to run the low voltage grids with small safety margins. Depending on the customer and the specific...

Demand side management for smart district heating

DEFF Research Database (Denmark)

Big, Oovidiu; Li, Hongwei; Svendsen, Svend

2016-01-01

between 25% and 35%. By making the light renovation, the heating system needs a minimum supply water temperature of 58ºC in order to cover the thermal comfort. Through extensive renovation, the supply water temperature could be reduced to 50ºC which makes it possible to transform the District Heating...... Temperature into Low Temperature. The building time constant for the extensive renovation is 86 hours which is double than a light building renovation and 53 hours higher than a non-renovated building. In the end of the paper is developed a formula which has the purpose to validate the results of virtual...... simulations. The relative percentage difference between the theoretical calculation and the virtual simulation results are between 2.5% and 17.5%....

Managing Water Demand : Policies, Practices and Lessons from the ...

International Development Research Centre (IDRC) Digital Library (Canada)

30 août 2005 ... Managing Water Demand : Policies, Practices and Lessons from the Middle East and North Africa Forums. Couverture du livre ... L'organisation HarassMap, soutenue par le CRDI, a une fois de plus incité à apporter des changements progressifs dans le domaine de la lutte contre le harcèlement sexuel.

Demand as Frequency Controlled Reserve

DEFF Research Database (Denmark)

Xu, Zhao; Østergaard, Jacob; Togeby, Mikael

2011-01-01

Relying on generation side alone is deemed insufficient to fulfill the system balancing needs for future Danish power system, where a 50% wind penetration is outlined by the government for year 2025. This paper investigates using the electricity demand as frequency controlled reserve (DFR) as a new...... balancing measure, which has a high potential and can provide many advantages. Firstly, the background of the research is reviewed, including conventional power system reserves and the electricity demand side potentials. Subsequently, the control logics and corresponding design considerations for the DFR...

Energy management in Lucknow city

International Nuclear Information System (INIS)

Zia, Hina; Devadas, V.

2007-01-01

In this paper, an attempt is made to prepare an energy management model for Lucknow city along with policy recommendations for optimal energy utilization and management. At the outset, the authors have reviewed the related literature on energy management in the urban system. The entire collected literature is divided into the following sections, such as, energy resource assessment, energy consumption, energy and economy, energy and environment, energy and transportation, forecasting the energy demand and supply, alternate energy sources and technologies, energy conservation and demand-side management and energy management measures in India, and are reviewed thoroughly and presented. Subsequently, an attempt is made to establish the importance of energy in urban development by using Systems concept. Lucknow city has been chosen for investigation in this study. A detailed methodology is developed for organizing the survey at the grassroots level to evolve feasible strategies for optimal energy management in the study area. An attempt is further made to assess the available energy resource in the city, and the energy consumption by source wise in the city and estimating the energy gap in the year 2011. The paper concludes with preparation of a detailed energy management model for Lucknow city to reduce the expected energy gap for the year 2011. The recommendations are made for supply augmentation, demand-side management and policy measures to be taken by the government authorities

Information Technology Framework for Pharmaceutical Supply Chain Demand Management: a Brazilian Case Study

Directory of Open Access Journals (Sweden)

Pedro Domingos Antoniolli

2016-01-01

Full Text Available The paper aims at proposing an information technology framework for demand management within a dyad on the supply chain pharmaceutical industry. The paper adopts the exploratory study as research method, involving a producer of generic drugs and its main distributor. Data was collected by semi - structured interviews. In pharmaceu tical supply chain, sharing information boosted by information technology translates into greater flexibility and reliability, lower costs, obtained through more reliable forecasting, and lower inventory requirements. There are few initiatives involving In formation Technology (IT applied to demand management in pharmaceutical supply chains available in the literature. It was found that the IT framework proposed in this research is adherent to the demand management of the focused pharmaceutical dyad. Other assumption was that, if partners processes integration exist, better supply chain performance is achieved. It was found that, by means of proposed tools and solutions, such as RFID and involved partners applications integration, this goal could be achieved . Because of the chosen research approach, results may be restricted to these specific dyadic processes. Further application of the proposed IT framework have to be tested. The paper identifies demand management strategic and operational processes that can reach a better performance by using the proposed IT framework. Based on the literature, were identified which IT requirements should be met to demand management processes optimization. Additionally, were applied questionnaires and interviews to the focuse d dyad personnel, to corroborate the data identified in the literature. Answers found in the case study link literature elements with those stated by respondents. Finally, based on this, was conceived an IT framework composed of three elements: 1. One spec ific for infrastructure, to enable data and systems interoperability among SC participants, considering a

Health promotion and disease prevention: a look at demand management programs.

Science.gov (United States)

Fronstin, P

1996-09-01

This Issue Brief describes employers' efforts to contain health expenditures through demand management programs. These programs are designed to reduce utilization by focusing on disease prevention and health promotion. Demand management includes work site health promotion, wellness programs, and access management. Work site health promotion is a comprehensive approach to improving health and includes awareness, health education, behavioral change, and organizational health initiatives. Wellness programs usually include stress management, smoking cessation, weight management, back care, health screenings, nutrition education, work place safety, prenatal and well baby care, CPR and first aid classes, and employee assistance programs (EAPs). These programs are often viewed positively by workers and can have long-term benefits for employers above and beyond health care cost containment. Demand management can benefit employers by increasing productivity, employee retention, and employee morale and by reducing turnover, absenteeism, future medical claims, and ultimately expenditures on health care. Even though a growing number of employers are offering wellness programs, only 37 percent of full-time workers employed in medium and large private establishments were eligible for wellness programs by 1993. However, a recent survey found that 88 percent of major employers have introduced some form of health promotion, disease prevention, or early intervention initiative to encourage healthy lifestyles among their salaried employees. Distinctions must be drawn between short- and long-term strategies. Demand management can be thought of as a short-term strategy when the focus of the program is on creating more appropriate and efficient health care utilization. Disease prevention is characterized by longer-term health improvement objectives. Whether the purpose is to reduce utilization in the short term or in the long term, the ultimate goal remains the same: to reduce health

Benefits of Demand-Side Response in Providing Frequency Response Service in the Future GB Power System

Energy Technology Data Exchange (ETDEWEB)

Teng, Fei, E-mail: fei.teng09@imperial.ac.uk; Aunedi, Marko; Pudjianto, Danny; Strbac, Goran [Department of Electrical and Electronic Engineering, Imperial College London, London (United Kingdom)

2015-08-18

The demand for ancillary service is expected to increase significantly in the future Great Britain (GB) electricity system due to high penetration of wind. In particular, the need for frequency response, required to deal with sudden frequency drops following a loss of generator, will increase because of the limited inertia capability of wind plants. This paper quantifies the requirements for primary frequency response and analyses the benefits of frequency response provision from demand-side response (DSR). The results show dramatic changes in frequency response requirements driven by high penetration of wind. Case studies carried out by using an advanced stochastic generation scheduling model suggest that the provision of frequency response from DSR could greatly reduce the system operation cost, wind curtailment, and carbon emissions in the future GB system characterized by high penetration of wind. Furthermore, the results demonstrate that the benefit of DSR shows significant diurnal and seasonal variation, whereas an even more rapid (instant) delivery of frequency response from DSR could provide significant additional value. Our studies also indicate that the competing technologies to DSR, namely battery storage, and more flexible generation could potentially reduce its value by up to 35%, still leaving significant room to deploy DSR as frequency response provider.

Benefits of Demand-Side Response in Providing Frequency Response Service in the Future GB Power System

International Nuclear Information System (INIS)

Teng, Fei; Aunedi, Marko; Pudjianto, Danny; Strbac, Goran

2015-01-01

The demand for ancillary service is expected to increase significantly in the future Great Britain (GB) electricity system due to high penetration of wind. In particular, the need for frequency response, required to deal with sudden frequency drops following a loss of generator, will increase because of the limited inertia capability of wind plants. This paper quantifies the requirements for primary frequency response and analyses the benefits of frequency response provision from demand-side response (DSR). The results show dramatic changes in frequency response requirements driven by high penetration of wind. Case studies carried out by using an advanced stochastic generation scheduling model suggest that the provision of frequency response from DSR could greatly reduce the system operation cost, wind curtailment, and carbon emissions in the future GB system characterized by high penetration of wind. Furthermore, the results demonstrate that the benefit of DSR shows significant diurnal and seasonal variation, whereas an even more rapid (instant) delivery of frequency response from DSR could provide significant additional value. Our studies also indicate that the competing technologies to DSR, namely battery storage, and more flexible generation could potentially reduce its value by up to 35%, still leaving significant room to deploy DSR as frequency response provider.

Distributed MPC applied to power demand side control

NARCIS (Netherlands)

Larsen, G.K.H.; Pons, J.; Achterop, S.; Scherpen, J.M.A.

2013-01-01

In the future, global energy balance of a smart grid system can be achieved by its agents deciding on their own power demand locally and the exchange of these decisions. In this paper, we model a network of households with washing machine programs that can be shifted in time so that the overall

Market architecture and power demand management

International Nuclear Information System (INIS)

Rious, Vincent; Roques, Fabien

2014-12-01

Demand response is a cornerstone problem in electricity markets considering climate change constraint. Most liberalized electricity markets have a poor track record at developing demand response. In Europe, different models are considered for demand response, from a development under a regulated regime to a development under competitive perspectives. In this paper, focusing on demand response for mid-size and small consumers, we investigate which types of market signals should be sent to demand response aggregators to see demand response emerge as a competitive activity. Using data from the French power system over eight years, we compare the possible market design options to allow demand response to develop. Our simulations demonstrate that with the current market rules, demand response is not a profitable activity in the French electricity industry. Introducing a capacity remuneration could bring additional revenues to demand response aggregators if the power system has no over-capacity

Agent-Based Architectures and Algorithms for Energy Management in Smart Grids. Application to Smart Power Generation and Residential Demand Response

International Nuclear Information System (INIS)

Roche, Robin

2012-01-01

also evaluated. With other demand-side management techniques, demand response enables reducing load during a given duration, for example in case of a congestion on the transmission system. A demand response system is proposed and relies on the use of the assets of residential customers to curtail and shift local loads (hybrid electric vehicles, air conditioning, and water heaters) so that the total system load remains under a given threshold. Aggregators act as interfaces between grid operators and a demand response market. A simulator is also developed to evaluate the performance of the proposed system. Results show that the system manages to maintain the total load under a threshold by using available resources, without compromising the steady-state stability of the distribution system. (author) [fr

Understanding the side effects of emission trading: implications for waste management.

Science.gov (United States)

Braschel, Nina; Posch, Alfred; Pierer, Magdalena

2014-01-01

The trading of emission allowances is an important market instrument in climate policy. However, the inclusion of certain branches of industry in the trading system not only provides incentives for emission reduction, it also entails unwanted side effects. Thus, the objective of the present study is to identify such side effects-positive and negative-by examining the potential impact of waste management inclusion in the European Union Emissions Trading Scheme (EU ETS). Desk research was supplemented with qualitative and quantitative empirical analysis (based on expert interviews and a questionnaire) in order to analyse the related perceptions and expectations of actors and stakeholders. The impact of waste management inclusion in the EU ETS is analysed in terms of the following three areas: (i) costs and cost pass-through, (ii), competitiveness and market position, and (iii) carbon leakage. Concerning expectations in the area of costs, both the interviewed experts and the practitioners surveyed thought that costs were likely to increase or that they could be passed on to customers. However, experts and practitioners differed with respect to the possibility of carbon leakage. Clearly, increased knowledge of the possible impact arising from inclusion of the waste sector in the EU ETS would enable managers to become more proactive and to manage waste streams and treatment options more economically.

The Problems of Estonian R&D and Innovation Strategy and the Demand-Side Innovation Policies

Directory of Open Access Journals (Sweden)

Tõnu Roolaht

2012-12-01

Full Text Available The second larger Estonian R&D and Innovation Strategy ‘Knowledge-based Estonia 2007-2013’ is aimed at continuing the advancement of research and development efforts towards an innovative knowledge-based society and economic system in Estonia. Fostering of knowledge-based high-tech industries is seen as paramount for retaining country’s competitive advantage. However, the mid-term evaluations indicate that several goals of the strategy might not be achievable by 2013. In fact, the policy measures have been much more successful in developing scientific research, as indicated by increased international publication, number of patents, and number of researchers and engineers. The advances in development of high-tech products and services through innovations are noticeable but less prominent. The purpose of this study is to suggest the role for demand-side innovation policies in helping to advance commercial development and innovation

Demand Response Technology Readiness Levels for Energy Management in Blocks of Buildings

Directory of Open Access Journals (Sweden)

Tracey Crosbie

2018-01-01

Full Text Available Fossil fuels deliver most of the flexibility in contemporary electricity systems. The pressing need to reduce CO2 emissions requires new methods to provide this flexibility. Demand response (DR offers consumers a significant role in the delivery of flexibility by reducing or shifting their electricity usage during periods of stress or constraint. Blocks of buildings offer more flexibility in the timing and use of energy than single buildings, however, and a lack of relevant scalable ICT tools hampers DR in blocks of buildings. To ameliorate this problem, a current innovation project called “Demand Response in Blocks of Buildings” (DR-BoB: www.dr-bob.eu has integrated existing technologies into a scalable cloud-based solution for DR in blocks of buildings. The degree to which the DR-BoB energy management solution can increase the ability of any given site to participate in DR is dependent upon its current energy systems, i.e., the energy metering, the telemetry and control technologies in building management systems, and the existence/capacity of local power generation and storage plants. To encourage the owners and managers of blocks of buildings to participate in DR, a method of assessing and validating the technological readiness to participate in DR energy management solutions at any given site is required. This paper describes the DR-BoB energy management solution and outlines what we have called the demand response technology readiness levels (DRTRLs for the implementation of such a solution in blocks of buildings.

Long-term evaluation of individualized marketing programs for travel demand management

Science.gov (United States)

2010-07-01

This research examines the use of individualized marketing as a transportation demand : management (TDM) strategy, using the City of Portlands SmartTrips program. This research : project has two specific aims: (1) to evaluate whether the benefits ...

Interaction between daily load demand curve and management of hydro-thermal generation system

International Nuclear Information System (INIS)

Granelli, G.; Montagna, M.; Pasini, G.; Innorta, M.; Marannino, P.

1993-01-01

The influence that the behaviour of the daily load demand curve has on the management of a hydro-thermal generation system is considered. The aim of this paper is to show the improvements that can be achieved by suitable load management techniques capable of flattening the load demand curve. The analysis is carried out by using a hydro-thermal scheduling program and a thermal unit dynamic dispatch procedure. The possibility of properly re-committing the available thermal units is also taken into account. The economical and technical convenience of shutting down less economical thermal units operating near the lower generations limits is verified. Finally, some considerations are made about the possible use of the thermal generation incremental costs as a tool for planning the end users' kWh prices, even in the short term. The results refer to a system with characteristics similar to those of the Italian one. In determining the daily load demand curves, the characteristics of load demand in Italy as well as in other European countries are taken into account

National survey addressing the information needs of primary care physicians: Side effect management of patients on androgen deprivation therapy.

Science.gov (United States)

Soeyonggo, Tony; Locke, Jennifer; Giudice, Maria Elizabeth Del; Alibhai, Shabbir; Fleshner, Neil Eric; Warde, Padraig

2014-03-01

Androgen deprivation therapy (ADT) is a common treatment for prostate cancer with numerous side effects. We assess primary care physicians' (PCPs) knowledge of ADT side effects and their interest in increasing their knowledge in this area. A list of active Canadian PCPs was obtained using the Canadian Medical Directory. A cross-sectional survey was distributed to 600 randomly selected physicians. We collected PCPs' demographic information, experience with ADT management, knowledge regarding ADT side effects and desired sources for obtaining knowledge on ADT management. In total, we received 103 completed questionnaires. Of these, 89% of PCPs had patients on ADT. One-third of respondents prescribed ADT and over half of them administered ADT annually. Thirty-eight percent felt their knowledge of ADT side effects was inadequate and 50% felt uncomfortable counselling patients on ADT. Many PCPs were less familiar with the incidence of functional side effects of ADT (i.e., hot flashes, fatigue and erectile dysfunction) compared to life-threatening side effects (i.e., cardiovascular events, metabolic syndrome, fractures). In terms of increasing their knowledge of ADT side effects, 82% of PCPs would use educational resources if they were available (52% and 32% preferred continued medical education [CME] events and educational pamphlets, respectively). PCPs play an important role in managing ADT side effects. There is poor awareness of the prevalence of ADT side effects, and many are uncomfortable in managing these side effects. These areas may be addressed through CME programs and educational pamphlets.

Evaluating demand side measures in simulation models for the power market

International Nuclear Information System (INIS)

Wolfgang, Ove; Doorman, Gerard

2011-01-01

Increased energy efficiency is one of the pillars for reducing CO 2 emissions. However, in models for the electricity market like unit commitment and dispatch models, increased efficiency of demand results in a paradoxical apparent reduction of the total economic surplus. The reason is that these are partial models for the electricity market, which do not take into account the effect of the changes in other markets. This paper shows how the calculation of the consumer surplus in the electricity market should be corrected to take into account the effect in other markets. In different cases we study shifts in the demand curve that are caused by increased energy efficiency, reduced cost for substitutes to electricity and real-time monitoring of demand, and we derive the necessary correction. The correction can easily be included in existing simulation models, and makes it possible to assess the effect of changes in demand on economic surplus. (author)

From rationing to energy saving certificates. Four decades of power demand control in France and United Kingdom

International Nuclear Information System (INIS)

Pautard, Eric

2012-01-01

From 'saving energy' awareness campaign to financial incentives for efficient technologies, from rationing to energy efficiency commitment, from monopolistic public management to compelling involvement of the electricity-supply market, from economic stakes to ecological issues, Demand-Side Management policies have changed over time. This paper analyzes this historical background in order to examine the effects of the electricity market deregulation in France and United Kingdom

Home Network Technologies and Automating Demand Response

Energy Technology Data Exchange (ETDEWEB)

McParland, Charles

2009-12-01

Over the past several years, interest in large-scale control of peak energy demand and total consumption has increased. While motivated by a number of factors, this interest has primarily been spurred on the demand side by the increasing cost of energy and, on the supply side by the limited ability of utilities to build sufficient electricity generation capacity to meet unrestrained future demand. To address peak electricity use Demand Response (DR) systems are being proposed to motivate reductions in electricity use through the use of price incentives. DR systems are also be design to shift or curtail energy demand at critical times when the generation, transmission, and distribution systems (i.e. the 'grid') are threatened with instabilities. To be effectively deployed on a large-scale, these proposed DR systems need to be automated. Automation will require robust and efficient data communications infrastructures across geographically dispersed markets. The present availability of widespread Internet connectivity and inexpensive, reliable computing hardware combined with the growing confidence in the capabilities of distributed, application-level communications protocols suggests that now is the time for designing and deploying practical systems. Centralized computer systems that are capable of providing continuous signals to automate customers reduction of power demand, are known as Demand Response Automation Servers (DRAS). The deployment of prototype DRAS systems has already begun - with most initial deployments targeting large commercial and industrial (C & I) customers. An examination of the current overall energy consumption by economic sector shows that the C & I market is responsible for roughly half of all energy consumption in the US. On a per customer basis, large C & I customers clearly have the most to offer - and to gain - by participating in DR programs to reduce peak demand. And, by concentrating on a small number of relatively

Workshops capacity building for agricultural water demand management; final report

NARCIS (Netherlands)

Vehmeijer, P.W.; Wolters, W.

2004-01-01

Agricultural Water Demand Management (AWDM) is at the core of the Water for Food Programme launched as a result of a pledge by the Netherlands' Minister for Agriculture at the 2nd World Water Forum in March 2000, The Hague. One of the projects that was started after the March 2000 pledge was

Optimisation of key performance measures in air cargo demand management

Directory of Open Access Journals (Sweden)

Alexander May

2014-04-01

Full Text Available This article sought to facilitate the optimisation of key performance measures utilised for demand management in air cargo operations. The focus was on the Revenue Management team at Virgin Atlantic Cargo and a fuzzy group decision-making method was used. Utilising intelligent fuzzy multi-criteria methods, the authors generated a ranking order of ten key outcome-based performance indicators for Virgin Atlantic air cargo Revenue Management. The result of this industry-driven study showed that for Air Cargo Revenue Management, ‘Network Optimisation’ represents a critical outcome-based performance indicator. This collaborative study contributes to existing logistics management literature, especially in the area of Revenue Management, and it seeks to enhance Revenue Management practice. It also provides a platform for Air Cargo operators seeking to improve reliability values for their key performance indicators as a means of enhancing operational monitoring power.

Managing a live music performance: A supply-side analysis

Directory of Open Access Journals (Sweden)

Bianca Manners

2015-03-01

Full Text Available Purpose and objective: The purpose of this research is to determine what managers regard as important critical success factors in ensuring a memorable visitor experience at a live music performance. Problem investigated: When organising a live music performance, it is evident that the various characteristics that form part of the visitor experience have to be considered. The critical success factors of live music performances from the supply side are fundamental, since the costs of organising live music performances are high, the needs of the visitors are constantly changing and competition plays a major role in the success of such events. Management furthermore constantly needs to be aware of the ever-changing external environment by determining what factors visitors consider to be vital for a rewarding experience at a major music event. This is extremely important since the concept of experience has become more pervasive, mainly given that the event sector, such as live music performances, has adopted experience as a tool to make individual businesses more competitive, as the organisations operating within this sector exist to provide consumers with an experience. Design and/or methodology and/or approach: A qualitative research method, by means of interviews, was used to obtain the relevant information from the selected participants. All the data collected in the process were transcribed into text and presented in narrative form. The six steps of data analysis and interpretation were applied to analyse the data. Findings and impications: The following four major themes emerged from the analysis; each theme was differentiated in terms of various categories and subcategories. Theme 1:The most important aspects for a memorable visitor experience; Theme 2:Main purpose when organising a live music performance; Theme 3:Important aspects regarding the management of a live music performance; Theme 4:Timing of event management

Quantifying demand flexibility of power-to-heat and thermal energy storage in the control of building heating systems

NARCIS (Netherlands)

Finck, C.J.; Li, R.; Kramer, R.P.; Zeiler, W.

2018-01-01

In the future due to continued integration of renewable energy sources, demand-side flexibility would be required for managing power grids. Building energy systems will serve as one possible source of energy flexibility. The degree of flexibility provided by building energy systems is highly

Bayesian Analysis of Demand Elasticity in the Italian Electricity Market

OpenAIRE

D'Errico, Maria; Bollino, Carlo

2015-01-01

The liberalization of the Italian electricity market is a decade old. Within these last ten years, the supply side has been extensively analyzed, but not the demand side. The aim of this paper is to provide a new method for estimation of the demand elasticity, based on Bayesian methods applied to the Italian electricity market. We used individual demand bids data in the day-ahead market in the Italian Power Exchange (IPEX), for 2011, in order to construct an aggregate demand function at the h...

Handling Uncertain Gross Margin and Water Demand in Agricultural Water Resources Management using Robust Optimization

Science.gov (United States)

Chaerani, D.; Lesmana, E.; Tressiana, N.

2018-03-01

In this paper, an application of Robust Optimization in agricultural water resource management problem under gross margin and water demand uncertainty is presented. Water resource management is a series of activities that includes planning, developing, distributing and managing the use of water resource optimally. Water resource management for agriculture can be one of the efforts to optimize the benefits of agricultural output. The objective function of agricultural water resource management problem is to maximizing total benefits by water allocation to agricultural areas covered by the irrigation network in planning horizon. Due to gross margin and water demand uncertainty, we assume that the uncertain data lies within ellipsoidal uncertainty set. We employ robust counterpart methodology to get the robust optimal solution.

Residential Consumer-Centric Demand-Side Management Based on Energy Disaggregation-Piloting Constrained Swarm Intelligence: Towards Edge Computing.

Science.gov (United States)

Lin, Yu-Hsiu; Hu, Yu-Chen

2018-04-27

The emergence of smart Internet of Things (IoT) devices has highly favored the realization of smart homes in a down-stream sector of a smart grid. The underlying objective of Demand Response (DR) schemes is to actively engage customers to modify their energy consumption on domestic appliances in response to pricing signals. Domestic appliance scheduling is widely accepted as an effective mechanism to manage domestic energy consumption intelligently. Besides, to residential customers for DR implementation, maintaining a balance between energy consumption cost and users’ comfort satisfaction is a challenge. Hence, in this paper, a constrained Particle Swarm Optimization (PSO)-based residential consumer-centric load-scheduling method is proposed. The method can be further featured with edge computing. In contrast with cloud computing, edge computing—a method of optimizing cloud computing technologies by driving computing capabilities at the IoT edge of the Internet as one of the emerging trends in engineering technology—addresses bandwidth-intensive contents and latency-sensitive applications required among sensors and central data centers through data analytics at or near the source of data. A non-intrusive load-monitoring technique proposed previously is utilized to automatic determination of physical characteristics of power-intensive home appliances from users’ life patterns. The swarm intelligence, constrained PSO, is used to minimize the energy consumption cost while considering users’ comfort satisfaction for DR implementation. The residential consumer-centric load-scheduling method proposed in this paper is evaluated under real-time pricing with inclining block rates and is demonstrated in a case study. The experimentation reported in this paper shows the proposed residential consumer-centric load-scheduling method can re-shape loads by home appliances in response to DR signals. Moreover, a phenomenal reduction in peak power consumption is achieved

Residential Consumer-Centric Demand-Side Management Based on Energy Disaggregation-Piloting Constrained Swarm Intelligence: Towards Edge Computing

Science.gov (United States)

Hu, Yu-Chen

2018-01-01

The emergence of smart Internet of Things (IoT) devices has highly favored the realization of smart homes in a down-stream sector of a smart grid. The underlying objective of Demand Response (DR) schemes is to actively engage customers to modify their energy consumption on domestic appliances in response to pricing signals. Domestic appliance scheduling is widely accepted as an effective mechanism to manage domestic energy consumption intelligently. Besides, to residential customers for DR implementation, maintaining a balance between energy consumption cost and users’ comfort satisfaction is a challenge. Hence, in this paper, a constrained Particle Swarm Optimization (PSO)-based residential consumer-centric load-scheduling method is proposed. The method can be further featured with edge computing. In contrast with cloud computing, edge computing—a method of optimizing cloud computing technologies by driving computing capabilities at the IoT edge of the Internet as one of the emerging trends in engineering technology—addresses bandwidth-intensive contents and latency-sensitive applications required among sensors and central data centers through data analytics at or near the source of data. A non-intrusive load-monitoring technique proposed previously is utilized to automatic determination of physical characteristics of power-intensive home appliances from users’ life patterns. The swarm intelligence, constrained PSO, is used to minimize the energy consumption cost while considering users’ comfort satisfaction for DR implementation. The residential consumer-centric load-scheduling method proposed in this paper is evaluated under real-time pricing with inclining block rates and is demonstrated in a case study. The experimentation reported in this paper shows the proposed residential consumer-centric load-scheduling method can re-shape loads by home appliances in response to DR signals. Moreover, a phenomenal reduction in peak power consumption is achieved

Residential Consumer-Centric Demand-Side Management Based on Energy Disaggregation-Piloting Constrained Swarm Intelligence: Towards Edge Computing

Directory of Open Access Journals (Sweden)

Yu-Hsiu Lin

2018-04-01

Full Text Available The emergence of smart Internet of Things (IoT devices has highly favored the realization of smart homes in a down-stream sector of a smart grid. The underlying objective of Demand Response (DR schemes is to actively engage customers to modify their energy consumption on domestic appliances in response to pricing signals. Domestic appliance scheduling is widely accepted as an effective mechanism to manage domestic energy consumption intelligently. Besides, to residential customers for DR implementation, maintaining a balance between energy consumption cost and users’ comfort satisfaction is a challenge. Hence, in this paper, a constrained Particle Swarm Optimization (PSO-based residential consumer-centric load-scheduling method is proposed. The method can be further featured with edge computing. In contrast with cloud computing, edge computing—a method of optimizing cloud computing technologies by driving computing capabilities at the IoT edge of the Internet as one of the emerging trends in engineering technology—addresses bandwidth-intensive contents and latency-sensitive applications required among sensors and central data centers through data analytics at or near the source of data. A non-intrusive load-monitoring technique proposed previously is utilized to automatic determination of physical characteristics of power-intensive home appliances from users’ life patterns. The swarm intelligence, constrained PSO, is used to minimize the energy consumption cost while considering users’ comfort satisfaction for DR implementation. The residential consumer-centric load-scheduling method proposed in this paper is evaluated under real-time pricing with inclining block rates and is demonstrated in a case study. The experimentation reported in this paper shows the proposed residential consumer-centric load-scheduling method can re-shape loads by home appliances in response to DR signals. Moreover, a phenomenal reduction in peak power

Social marketing in travel demand management

DEFF Research Database (Denmark)

Thøgersen, John

2013-01-01

Social marketing is an increasingly popular means of Travel Demand Management (TDM) for promoting non-car modes of travel that has proven to be effective, in particular if combined with structural improvements. Successful social marketing is based on a thorough understanding of targeted people......’s needs, wants, and perceived barriers. It uses a combination of means to create an attractive offering tailored to these needs, wants, and perceived barriers. It applies established marketing techniques for catching attention to the offerings. However, there are limits to what social marketing can...... accomplish. In particular, social marketing is limited to cases where only perceived and not real barriers prevent people from using alternative travel modes. A review is given of research on and practical experiences of social marketing in TDM as a basis for evaluating its usefulness....

A Water Demand Management Strategy For The Namibian Tourism Sector

Science.gov (United States)

Schachtschneider, K.; Winter, K.

The arid conditions of Namibia are forcing its decision-makers to resort to new wa- ter resource management approaches, including Water Demand Management (WDM). When Namibia achieved its independence from South Africa 1990, a new opportunity arose to rewrite certain restrictive laws and policies in order to bring about redress, development and transformation. The new Water Policy is one example in which the mindset is changed from a supply to a demand oriented water management ap- proach. Legal support for WDM within the new Water Act is a critical component that will support the implementation of WDM in all economic sectors, such as agri- culture, mining and tourism. It is argued that an appropriate WDM strategy should be designed specifically for each sector, once the typical water use patterns in a sec- tor are understood and key water resource managers at all levels are identified. The Namibian tourism sector is geographically dispersed and control over its operations is compounded by the fact that it is frequently located in extremely remote areas that are arid and ecologically sensitive. In general, WDM is rarely practised, because it is not yet supported by law and there are currently no institutional arrangements to con- trol water use in this geographically dispersed industrial sector through which WDM could be enforced either through metering and/or payments. Managers of tourist en- terprises undertake most of the water management themselves, and have been identi- fied as being crucial to the implementation of WDM strategies. A study of six tourist facilities determined the willingness and motivation of these managers to undertake various WDM initiatives. The study identified three factors which appear to influence the actions of managers, namely external controls, economics and company ethics. It is recommended that a tourism sector WDM strategy should focus on these three factors in order to transform the WDM aims and objectives on the policy level into

Surgical management of colonic diverticular disease: discrepancy between right- and left-sided diseases.

Science.gov (United States)

Oh, Heung-Kwon; Han, Eon Chul; Ha, Heon-Kyun; Choe, Eun Kyung; Moon, Sang Hui; Ryoo, Seung-Bum; Jeong, Seung-Yong; Park, Kyu Joo

2014-08-07

To compare the outcome of the surgical management of left-sided and right-sided diverticular disease. The medical records of 77 patients who were surgically treated for diverticular disease between 1999 and 2010 in a tertiary referral hospital were retrospectively reviewed. The study population was limited to cases wherein the surgical specimen was confirmed as diverticulosis by pathology. Right-sided diverticula were classified as those arising from the cecum, ascending colon, and transverse colon, and those from the descending colon, sigmoid colon, and rectum were classified as left-sided diverticulosis. To assess the changing trend of occurrence of diverticulosis, data were compared with two previous studies of 51 patients. The proportion of left-sided disease cases was significantly increased compared to the results of our previous studies in 1994 and 2001, (27.5% vs 48.1%, P disease. However, patients with right-sided disease were significantly younger (50.9 year vs 64.0 year, P disease was significantly associated with a higher incidence of complicated diverticulitis (89.2% vs 57.5%, P diverticular disease, the incidence of left-sided disease in Korea has increased since 2001 and is associated with worse surgical outcomes.

Balancing opioid-induced gastrointestinal side effects with pain management: Insights from the online community.

Science.gov (United States)

Whitman, Cynthia B; Reid, Mark W; Arnold, Corey; Patel, Haridarshan; Ursos, Lyann; Sa'adon, Roee; Pourmorady, Jonathan; Spiegel, Brennan M R

2015-01-01

Opioids cause gastrointestinal (GI) symptoms such as nausea, vomiting, pain, and (in 40 percent) constipation that diminish patients' quality of life. Outside traditional surveys, little is known about the opioid-induced constipation (OIC) patient experience and its impact on pain management. The purpose of this study was to use data from social media platforms to qualitatively examine patient beliefs about OIC and other prominent GI side effects, their impact on effective pain management and doctor-patient interaction. The authors collected Tweets from March 25 to July 31, 2014, and e-forum posts from health-related social networking sites regardless of timestamp. The authors identified specific keywords related to opioids and GI side effects to locate relevant content in the dataset, which was then manually coded using ATLAS.ti software. The authors examined 2,519,868 Tweets and more than 1.8 billion e-forum posts, of which, 88,586 Tweets and 9,767 posts satisfied the search criteria. Three thousand three individuals experienced opioidinduced GI side effects, mostly related to phenanthrenes (n = 1,589), and 1,274 (42.4 percent) individuals described constipation. Over-the-counter medications and nonevidence-based natural approaches were most commonly used to alleviate constipation. Many individuals questioned, rotated, reduced, or stopped their opioid treatments as a result of their GI side effects. Investigation of social media reveals a struggle to balance pain management with opioid-induced GI side effects, especially constipation. Individuals are often unprepared to treat OIC, to modify opioid regiments without medical advice, and to resort to using natural remedies and treatments lacking scientific evidence of effectiveness. These results identify opportunities to improve physician-patient communication and explore effective treatment alternatives.

[Rare side effects in management of hyperthyroidism. Case report].

Science.gov (United States)

Sohár, Gábor; Kovács, Mónika; Györkös, Andrea; Gasztonyi, Beáta

2016-05-29

The authors present the case history of a patient suffering from hyperthyroidism. The diagnostic procedures revealed the presence of propylthiouracyl induced vasculitis with renal involvement, that recovered completely after the withdrawal of propylthiouracyl and corticosteroid treatment. Thereafter, the patient was treated with thiamasol, that caused agranulocytosis with fever. After transient litium carbonate therapy a succesful thyreoidectomy was performed. Cumulative serious side effects of antithyroid drugs are rare. This case highlights some of the challenges and complications encountered in the management of hyperthyroidism.

Global Supply and Demand of Opioids for Pain Management.

Science.gov (United States)

Kunnumpurath, Sreekumar; Julien, Natasha; Kodumudi, Gopal; Kunnumpurath, Anamika; Kodumudi, Vijay; Vadivelu, Nalini

2018-04-04

The goal of this review is to evaluate the global supply and demand of opioids used for pain management and discuss how it relates to the utilization of opioids around the world. The purpose of the review is also to determine the factors that contribute to inappropriate pain management. The total global production of opium for opioid manufacturing is enough to supply the growing global demands. However, licit opioids are only consumed by 20% of the world population. Most people throughout the world had no access to opioid analgesics for pain relief in case of need. Opioid misuse and abuse is not only a phenomena plague by the USA but globally across many countries. Many countries have a lack of availability of opioids, contributing factors being strict government regulations limiting access, lack of knowledge of the efficacy of opioid analgesics in treating acute and chronic pain and palliative care, and the stigma that opioids are highly addictive. For the countries in which opioids are readily available and prescribed heavily, diversion, misuse, abuse, and the resurgence of heroin have become problems leading to morbidity and mortality. It is pertinent to find a balance between having opioids accessible to patients in need, with ensuring that opioids are regulated along with other illicit drugs to decrease abuse potential.

Coping with side effects from cancer treatment in daily life from the perspective of cancer patients: A qualitative empirical study

DEFF Research Database (Denmark)

Pedersen, Birgith; Koktved, Dorte Pallesen; Nielsen, Lene Lyngø

Aim The aim of this paper is to deepen our understanding of how patients cope with side effects from cancer treatment in daily life. Background Patients receiving cancer treatment experience acute side effects and need individualized information and guidance in order to manage treatment......-related adverse events in everyday life. However development in cancer treatment and the societal demands for efficiency may limit the possibility for individualized support. Methods Nine patients were interviewed from March to July 2009 to explore the patients’ experience of coping with side effects in daily...

Energy Production System Management - Renewable energy power supply integration with Building Automation System

International Nuclear Information System (INIS)

Figueiredo, Joao; Martins, Joao

2010-01-01

Intelligent buildings, historically and technologically, refers to the integration of four distinctive systems: Building Automation Systems (BAS), Telecommunication Systems, Office Automation Systems and Computer Building Management Systems. The increasing sophisticated BAS has become the 'heart and soul' of modern intelligent buildings. Integrating energy supply and demand elements - often known as Demand-Side Management (DSM) - has became an important energy efficiency policy concept. Nowadays, European countries have diversified their power supplies, reducing the dependence on OPEC, and developing a broader mix of energy sources maximizing the use of renewable energy domestic sources. In this way it makes sense to include a fifth system into the intelligent building group: Energy Production System Management (EPSM). This paper presents a Building Automation System where the Demand-Side Management is fully integrated with the building's Energy Production System, which incorporates a complete set of renewable energy production and storage systems.

Machine learning for identifying demand patterns of home energy management systems with dynamic electricity pricing

NARCIS (Netherlands)

Koolen, D. (Derck); Sadat-Razavi, N. (Navid); W. Ketter (Wolfgang)

2017-01-01

textabstractEnergy management plays a crucial role in providing necessary system flexibility to deal with the ongoing integration of volatile and intermittent energy sources. Demand Response (DR) programs enhance demand flexibility by communicating energy market price volatility to the end-consumer.

Utility Sector Impacts of Reduced Electricity Demand

Energy Technology Data Exchange (ETDEWEB)

Coughlin, Katie

2014-12-01

This report presents a new approach to estimating the marginal utility sector impacts associated with electricity demand reductions. The method uses publicly available data and provides results in the form of time series of impact factors. The input data are taken from the Energy Information Agency's Annual Energy Outlook (AEO) projections of how the electric system might evolve in the reference case, and in a number of side cases that incorporate different effciency and other policy assumptions. The data published with the AEO are used to define quantitative relationships between demand-side electricity reductions by end use and supply-side changes to capacity by plant type, generation by fuel type and emissions of CO2, Hg, NOx and SO2. The impact factors define the change in each of these quantities per unit reduction in site electricity demand. We find that the relative variation in these impacts by end use is small, but the time variation can be significant.

Evaluation of Stock Management Strategies Reliability at Dependent Demand