Development of TRU transmuters for optimization of the global fuel cycle. Final Report for the NERI Project

International Nuclear Information System (INIS)

Lee, John C.

2009-01-01

This final report summarizes the research activities during the entire performance period of the NERI grant, including the extra 9 months granted under a no-cost time extension. Building up on the 14 quarterly reports submitted through October 2008, we present here an overview of the research accomplishments under the five tasks originally proposed in July 2004, together with citations for publications resulting from the project. The AFCI-NERI project provided excellent support for two undergraduate and 10 graduates students at the University of Michigan during a period of three years and nine months. Significant developments were achieved in three areas: (1) Efficient deterministic fuel cycle optimization algorithms both for PWR and SFR configurations, (2) Efficient search algorithm for PWR equilibrium cycles, and (3) Simplified Excel-based script for dynamic fuel cycle analysis of diverse cycles. The project resulted in a total of 8 conference papers and three journal papers, including two that will be submitted shortly. Three pending publications are attached to the report

Produção de conhecimento na enfermagem em oncologia: contribuição da escola de enfermagem Anna Nery Producción de conocimiento en la enfermería en oncología: contribución de la escola de enfermagem anna nery (escuela de enfermería Anna Nery Production of knowledge in nursing in oncology: contribution of Anna Nery nursing school

Directory of Open Access Journals (Sweden)

Marléa Chagas Moreira

2010-09-01

Full Text Available O estudo teve como objetivos mapear as teses e dissertações produzidas no Programa de Pós-Graduação da Escola de Enfermagem Anna Nery com enfoque na enfermagem em oncologia e analisar as repercussões diante dos aspectos epistemológicos destacados. Estudo exploratório, descritivo, retrospectivo e bibliográfico de 59 estudos (45 dissertações e 14 teses produzidos de 1980 a 2009. O referencial teórico-metodológico foi a Metodologia de Categorização Epistemológica para a Pesquisa na Enfermagem. Os resultados indicam que a produção analisada é mais setorizada na área da oncologia clínica, com ênfase nos aspectos Gestão Saúde/Enfermagem, Saúde da Mulher e Fundamentos do Cuidado de Enfermagem. Houve predomínio de estudos na perspectiva sociológica com abordagem qualitativa. As repercussões demonstradas nos aspectos epistemológicos destacados possibilitam afirmar que o conhecimento produzido é consistente com a complexidade e as tentativas de explicação sobre a arte de cuidar dos clientes com câncer e com esforços de definir/ampliar critérios e padrões assistenciais. Enfermagem Oncológica. Pesquisa em Enfermagem. Educação de Pós-graduação em EnfermagemEl estudio tuvo como objetivo mapear las tesis y disertaciones del Programa de Posgraduado de la Escola de Enfermagem Anna Nery (Escuela de Enfermería Anna Nery con énfasis en la enfermería en oncología y analizar las repercusiones frente los aspectos epistemológicos señalados. Exploratorio, descriptivo, retrospectivo y documental de 59 estudios (45 disertaciones y 14 tesis producidos desde 1980 hasta 2009. El referencial teórico-metodológico fue la Metodología Epistemológica para la Investigación en Enfermería. Los resultados indican que la producción es la más sectorizada de la oncología clínica, con énfasis en Gestión de la Salud / Enfermería, Salud de la Mujer y Fundamentos de la Atención de Enfermería. Se detectó un predominio de los

Gli incerti confini del cosmo dai buchi neri alle macchine del tempo

CERN Document Server

De Felice, Fernando

2000-01-01

Il libro mostra come la gravitazione abbia un ruolo determinante nei fenomeni cosmici che più ci impressionano, da quelli relativamente vicini alla nostra esperienza (come la formazione delle stelle) a quelli meno intuibili (come la formazione dei buchi neri), alla struttura dell'Universo nel suo insieme. Oltre a spiegare, in modo qualitativo, concetti come la geometria dello spazio-tempo, la relatività del tempo e i coni di luce, l'autore formula un'ipotesi innovativa tendente a spiegare l'origine della gravitazione e con essa quella dei fenomeni circondati ancora da un alone di mistero: la materia oscura dell'Universo e il destino della materia alla fine del collasso gravitazionale.

NERI PROJECT 99-119. TASK 1. ADVANCED CONTROL TOOLS AND METHODS. FINAL REPORT

Energy Technology Data Exchange (ETDEWEB)

March-Leuba, J.A.

2002-09-09

Nuclear plants of the 21st century will employ higher levels of automation and fault tolerance to increase availability, reduce accident risk, and lower operating costs. Key developments in control algorithms, fault diagnostics, fault tolerance, and communication in a distributed system are needed to implement the fully automated plant. Equally challenging will be integrating developments in separate information and control fields into a cohesive system, which collectively achieves the overall goals of improved performance, safety, reliability, maintainability, and cost-effectiveness. Under the Nuclear Energy Research Initiative (NERI), the U. S. Department of Energy is sponsoring a project to address some of the technical issues involved in meeting the long-range goal of 21st century reactor control systems. This project, ''A New Paradigm for Automated Development Of Highly Reliable Control Architectures For Future Nuclear Plants,'' involves researchers from Oak Ridge National Laboratory, University of Tennessee, and North Carolina State University. This paper documents a research effort to develop methods for automated generation of control systems that can be traced directly to the design requirements. Our final goal is to allow the designer to specify only high-level requirements and stress factors that the control system must survive (e.g. a list of transients, or a requirement to withstand a single failure.) To this end, the ''control engine'' automatically selects and validates control algorithms and parameters that are optimized to the current state of the plant, and that have been tested under the prescribed stress factors. The control engine then automatically generates the control software from validated algorithms. Examples of stress factors that the control system must ''survive'' are: transient events (e.g., set-point changes, or expected occurrences such a load rejection,) and postulated

El oratorio de San Felipe Neri y la controversia sobre las comedias en la Valencia del siglo XVII

Directory of Open Access Journals (Sweden)

Callado Estela, Emilio

2011-06-01

Full Text Available The present article analyzes some of the religious implications deriving from the famous controversy about the legality or illegality of theatre in the 17th century and in the city of Valencia. The question arose from an episode in which Don Luis Crespi de Borja was directly implicated. Crespi was the founder of the Oratory of Saint Philip Neri in the Valencian region and a persistent fighter against comedy. As a consequence of his position in this affair members of the Oratory were pursued by other ecclesiastical sectors favouring theatre.

El presente artículo analiza algunas de la implicaciones religiosas de la famosa controversia sobre la licitud o ilicitud del teatro, en el siglo XVII y en la ciudad de Valencia, a partir de un episodio protagonizado por don Luis Crespí de Borja, fundador del Oratorio de San Felipe Neri en tierras valencianas y consumado azote de las comedias, cuyo posicionamiento en este particular valdría a los oratorianos la persecución por parte de otros sectores eclesiásticos partidarios del arte escénico.

Una Aparición de la Virgen con el Niño a san Felipe Neri de Francisco Ignacio Ruiz de la Iglesia: atribución y contexto iconográfico

Directory of Open Access Journals (Sweden)

Gutiérrez Pastor, Ismael

2013-06-01

Full Text Available The author studies a painting of the Apparition of the Virgin and Child with St. Philip Neri, attributing it to the painter Francisco Ignacio Ruiz de la Iglesia and analyzing its iconography in the context of Baroque painting in Madrid.Se estudia una pintura de la Aparición de la Virgen con el Niño a San Felipe Neri, se atribuye al pintor Francisco Ignacio Ruiz de la Iglesia y se analiza su iconografía en el contexto de la pintura madrileña del Barroco.

NERIES: Seismic Data Gateways and User Composed Datasets Metadata Management

Science.gov (United States)

Spinuso, Alessandro; Trani, Luca; Kamb, Linus; Frobert, Laurent

2010-05-01

One of the NERIES EC project main objectives is to establish and improve the networking of seismic waveform data exchange and access among four main data centers in Europe: INGV, GFZ, ORFEUS and IPGP. Besides the implementation of the data backbone, several investigations and developments have been conducted in order to offer to the users the data available from this network, either programmatically or interactively. One of the challenges is to understand how to enable users` activities such as discovering, aggregating, describing and sharing datasets to obtain a decrease in the replication of similar data queries towards the network, exempting the data centers to guess and create useful pre-packed products. We`ve started to transfer this task more and more towards the users community, where the users` composed data products could be extensively re-used. The main link to the data is represented by a centralized webservice (SeismoLink) acting like a single access point to the whole data network. Users can download either waveform data or seismic station inventories directly from their own software routines by connecting to this webservice, which routes the request to the data centers. The provenance of the data is maintained and transferred to the users in the form of URIs, that identify the dataset and implicitly refer to the data provider. SeismoLink, combined with other webservices (eg EMSC-QuakeML earthquakes catalog service), is used from a community gateway such as the NERIES web portal (http://www.seismicportal.eu). Here the user interacts with a map based portlet which allows the dynamic composition of a data product, binding seismic event`s parameters with a set of seismic stations. The requested data is collected by the back-end processes of the portal, preserved and offered to the user in a personal data cart, where metadata can be generated interactively on-demand. The metadata, expressed in RDF, can also be remotely ingested. They offer rating

Network of Research Infrastructures for European Seismology (NERIES)—Web Portal Developments for Interactive Access to Earthquake Data on a European Scale

OpenAIRE

A. Spinuso; L. Trani; S. Rives; P. Thomy; F. Euchner; Danijel Schorlemmer; Joachim Saul; Andres Heinloo; R. Bossu; T. van Eck

2009-01-01

The Network of Research Infrastructures for European Seismology (NERIES) is European Commission (EC) project whose focus is networking together seismological observatories and research institutes into one integrated European infrastructure that provides access to data and data products for research. Seismological institutes and organizations in European and Mediterranean countries maintain large, geographically distributed data archives, therefore this scenario suggested a design approach bas...

Uncertainty Quantification in the Reliability and Risk Assessment of Generation IV Reactors: Final Scientific/Technical Report

International Nuclear Information System (INIS)

Vierow, Karen; Aldemir, Tunc

2009-01-01

The project entitled, 'Uncertainty Quantification in the Reliability and Risk Assessment of Generation IV Reactors', was conducted as a DOE NERI project collaboration between Texas A and M University and The Ohio State University between March 2006 and June 2009. The overall goal of the proposed project was to develop practical approaches and tools by which dynamic reliability and risk assessment techniques can be used to augment the uncertainty quantification process in probabilistic risk assessment (PRA) methods and PRA applications for Generation IV reactors. This report is the Final Scientific/Technical Report summarizing the project.

Uncertainty Quantification in the Reliability and Risk Assessment of Generation IV Reactors: Final Scientific/Technical Report

Energy Technology Data Exchange (ETDEWEB)

Vierow, Karen; Aldemir, Tunc

2009-09-10

The project entitled, “Uncertainty Quantification in the Reliability and Risk Assessment of Generation IV Reactors”, was conducted as a DOE NERI project collaboration between Texas A&M University and The Ohio State University between March 2006 and June 2009. The overall goal of the proposed project was to develop practical approaches and tools by which dynamic reliability and risk assessment techniques can be used to augment the uncertainty quantification process in probabilistic risk assessment (PRA) methods and PRA applications for Generation IV reactors. This report is the Final Scientific/Technical Report summarizing the project.

Factors Affecting Women Enrolment In Technical Institutions In Tanzania A Case Study Of Arusha Technical College

OpenAIRE

Glory B. Kaaya; Dr. Esther Waiganjo

2015-01-01

Abstract The purpose of this study was to investigate the factors affecting women enrolment in Technical Institutions in Tanzania by focusing on the women. The study examined in detail the factors affecting women enrolment in Technical institutions and Arusha Technical College in particular as well as exploring sexual dynamics within Technical Institutions. Moreover a number of theoretical frameworks were concerned basing on the objectives a case study design was employed involving both qua...

Elogio do anacronismo: para os andróginos de Ismael Nery

Directory of Open Access Journals (Sweden)

Maria Bernardete Ramos Flores

Full Text Available "Por que fazer o elogio do anacronismo quando se é historiador?" - perguntou Loraux. O anacronismo, que já foi o pecado dos historiadores, hoje se impõe. Numa abordagem inspirada por alguns filósofos contemporâneos, tais como Agamben, Rancière e Didi-Huberman, que instigam em nosso pensamento uma nova concepção de tempo, este artigo desenvolve argumentos para demonstrar que Ismael Nery (1900-1934, o "artista maldito" do modernismo brasileiro, pode ser tomado como um artista anacrônico, pelo fato de configurar montagens temporais em sua arte (pintura, desenho e poesia para expressar um dos princípios de seu sistema filosófico: a abstração do tempo e do espaço. A arte de Ismael apresentou-se como universal, mística e espiritual, o que o deixou fora do seu tempo, ou melhor, fora da estética da representação chamada para dar visibilidade aos temas do nacional.

Economic Analysis of Factors Affecting Technical Efficiency of ...

African Journals Online (AJOL)

Economic Analysis of Factors Affecting Technical Efficiency of Smallholders ... socio-economic characteristics which influence technical efficiency in maize production. ... Ministry of Agriculture and livestock, records, books, reports and internet.

Network of Research Infrastructures for European Seismology (NERIES)-Web Portal Developments for Interactive Access to Earthquake Data on a European Scale

Science.gov (United States)

Spinuso, A.; Trani, L.; Rives, S.; Thomy, P.; Euchner, F.; Schorlemmer, D.; Saul, J.; Heinloo, A.; Bossu, R.; van Eck, T.

2009-04-01

The Network of Research Infrastructures for European Seismology (NERIES) is European Commission (EC) project whose focus is networking together seismological observatories and research institutes into one integrated European infrastructure that provides access to data and data products for research. Seismological institutes and organizations in European and Mediterranean countries maintain large, geographically distributed data archives, therefore this scenario suggested a design approach based on the concept of an internet service oriented architecture (SOA) to establish a cyberinfrastructure for distributed and heterogeneous data streams and services. Moreover, one of the goals of NERIES is to design and develop a Web portal that acts as the uppermost layer of the infrastructure and provides rendering capabilities for the underlying sets of data The Web services that are currently being designed and implemented will deliver data that has been adopted to appropriate formats. The parametric information about a seismic event is delivered using a seismology-specific Extensible mark-up Language(XML) format called QuakeML (https://quake.ethz.ch/quakeml), which has been formalized and implemented in coordination with global earthquake-information agencies. Uniform Resource Identifiers (URIs) are used to assign identifiers to (1) seismic-event parameters described by QuakeML, and (2) generic resources, for example, authorities, locations providers, location methods, software adopted, and so on, described by use of a data model constructed with the resource description framework (RDF) and accessible as a service. The European-Mediterranean Seismological Center (EMSC) has implemented a unique event identifier (UNID) that will create the seismic event URI used by the QuakeML data model. Access to data such as broadband waveform, accelerometric data and stations inventories will be also provided through a set of Web services that will wrap the middleware used by the

Pictures to a story. Notes on Vita di San Filippo Neri at the Civic Museum of Bassano del Grappa

Directory of Open Access Journals (Sweden)

Federica Vettori

2014-12-01

Full Text Available During the eighteenth century the venetian publishing knows a flowering season thanks to the involvement of great artists in the field of illustration. Pietro Antonio Novelli was one of the most prolific inventors of decorations for illustrated books. He sketched the illustrations of Vita di San Filippo Neri engraved by Innocente Alessandri and printed in Venice in 1793. At the Museum of Bassano del Grappa we can find a special watercolored edition: sixty large prints that tell, as if they were history paintings, the life of the saint.

Determinants of factors influencing technical efficiency of cocoa ...

African Journals Online (AJOL)

This study examined the factors influencing technical efficiency of cocoa production in Ondo State, Nigeria using a stochastic frontier production function. Using the random sampling technique, well-structured questionnaire were used to elicit information from 120 cocoa farmers in Ondo State, Nigeria. The mean technical ...

IRIS Final Technical Progress Report

Energy Technology Data Exchange (ETDEWEB)

M. D. Carelli

2003-11-03

OAK-B135 This NERI project, originally started as the Secure Transportable Autonomous Light Water Reactor (STAR-LW) and currently known as the International Reactor Innovative and Secure (IRIS) project, had the objective of investigating a novel type of water-cooled reactor to satisfy the Generation IV goals: fuel cycle sustainability, enhanced reliability and safety, and improved economics. The research objectives over the three-year (1999-2002) program were as follows: First year: Assess various design alternatives and establish main characteristics of a point design; Second year: Perform feasibility and engineering assessment of the selected design solutions; Third year: Complete reactor design and performance evaluation, including cost assessment These objectives were fully attained and actually they served to launch IRIS as a full fledged project for eventual commercial deployment. The program did not terminate in 2002 at the end of the NERI program, and has just entered in its fifth year. This has been made possible by the IRIS project participants which have grown from the original four member, two-countries team to the current twenty members, nine countries consortium. All the consortium members work under their own funding and it is estimated that the value of their in-kind contributions over the life of the project has been of the order of $30M. Currently, approximately 100 people worldwide are involved in the project. A very important constituency of the IRIS project is the academia: 7 universities from four countries are members of the consortium and five more US universities are associated via parallel NERI programs. To date, 97 students have worked or are working on IRIS; 59 IRIS-related graduate theses have been prepared or are in preparation, and 41 of these students have already graduated with M.S. (33) or Ph.D. (8) degrees. This ''final'' report (final only as far as the NERI program is concerned) summarizes the work performed

Disposal of mixed waste: Technical, institutional, and policy factors

International Nuclear Information System (INIS)

Waters, R.D.; Gruebel, M.M.; Letourneau, M.J.; Case, J.T.

1996-01-01

In conjunction with the affected States as part of their interactions required by the Federal Facilities Compliance Act, the Department of Energy has been developing a process for a disposal configuration for its mixed low-level waste (MLLW). This effort, spanning more than two years, has reduced the potential disposal sites from 49 to 15. The remaining 15 sites have been subjected to a performance evaluation to determine their strengths and weaknesses for disposal of MLLW. The process has included institutional and policy factors as well as strictly technical analyses, and technical analyses must be supported by technical analyses, and technical analyses must be performed within a framework which includes some institutional considerations, with the institutional considerations selected for inclusion largely a matter of policy. While the disposal configuration process is yet to be completed, the experience to date offers a viable approach for solving some of these issues. Additionally, several factors remain to be addressed before an MLLW disposal configuration can be developed

Technical change and total factor productivity growth: the case of Chinese provinces

OpenAIRE

Heshmati, Almas; Kumbhakar, Subal C.

2010-01-01

In the literature technical change is mostly assumed to be exogenous and specified as a function of time. However, some exogenous external factors other than time can also affect technical change. In this paper we model technical change via time trend (purely external non-economic) as well as other exogenous (external economic) factors (technology shifters). We define technology index based on the external economic factors which are indicators of ‘technology’. Thus our definition of productio...

Analysis of factors affecting the technical efficiency of cocoa ...

African Journals Online (AJOL)

The study estimated the technical efficiency of cocoa producers and the socioeconomic factors influencing technical efficiency and identified the constraints to cocoa production. A multi-stage random sampling method was used to select 180 cocoa farmers who were interviewed for the study. Data on the inputs used and ...

NERI PROJECT 99-119. TASK 2. DATA-DRIVEN PREDICTION OF PROCESS VARIABLES. FINAL REPORT

Energy Technology Data Exchange (ETDEWEB)

Upadhyaya, B.R.

2003-04-10

This report describes the detailed results for task 2 of DOE-NERI project number 99-119 entitled ''Automatic Development of Highly Reliable Control Architecture for Future Nuclear Power Plants''. This project is a collaboration effort between the Oak Ridge National Laboratory (ORNL,) The University of Tennessee, Knoxville (UTK) and the North Carolina State University (NCSU). UTK is the lead organization for Task 2 under contract number DE-FG03-99SF21906. Under task 2 we completed the development of data-driven models for the characterization of sub-system dynamics for predicting state variables, control functions, and expected control actions. We have also developed the ''Principal Component Analysis (PCA)'' approach for mapping system measurements, and a nonlinear system modeling approach called the ''Group Method of Data Handling (GMDH)'' with rational functions, and includes temporal data information for transient characterization. The majority of the results are presented in detailed reports for Phases 1 through 3 of our research, which are attached to this report.

Effects of Water Radiolysis in Water Cooled Reactors, NERI Proposal No.99-0010

International Nuclear Information System (INIS)

Pimblott, S.M.

2000-01-01

OAK B188 Effects of Water Radiolysis in Water Cooled Reactors, NERI Proposal No.99-0010. The aim of this project is to develop an experiment-and-theory based model for the radiolysis of nonstandard aqueous systems like those that will be encountered in the Advance Light Water reactor. Three aspects of the radiation chemistry of aqueous systems at elevated temperatures are considered in the project: the radiation-induced reaction within the primary track and with additives, the homogeneous production of H 2 O 2 at high radiation doses, and the heterogeneous reaction of the radiation-induced species escaping the track. The goals outlined for Phase 1 of the program were: the compilation of information on the radiation chemistry of water at elevated temperatures, the simulation of existing experimental data on the escape yields of e aq - , OH, H 2 and H 2 O 2 in γ radiolysis at elevated temperatures, the measurement of low LET and high LET production of H 2 O 2 at room temperature, the compilation of information on the radiation chemistry of water-(metal) oxide interfaces, and the synthesis and characterization the heterogeneous water-oxide systems of interest

Gênese do serviço de enfermagem do Hospital Federal de Bonsucesso: contribuição da escola Ana Néri Génesis del servicio de enfermería en el Hospital Federal de Bonsucesso: contribución de la Escuela Ana Neri Genesis of nursing service in Hospital Federal Bonsucesso: contribution of Ana Neri School

Directory of Open Access Journals (Sweden)

Camila Pureza Guimarães Silva

2012-03-01

Full Text Available O objeto deste estudo é a implantação do Serviço de Enfermagem no Hospital do Instituto de Aposentadoria e Pensões dos Empregados em Transportes e Cargas, atual Hospital Federal de Bonsucesso, no período 1946-1948. Seu objetivo é discutir a participação da Escola Ana Néri nesse processo. Fontes primárias: documentos escritos e depoimentos orais. Fontes secundárias: bibliografias acerca da temática. A abordagem teórico-metodológica apoiou-se em conceitos dos sociólogos Pierre Bourdieu e Maria Cecília Minayo. Evidenciou-se que a contribuição da Escola Ana Néri além de ter sido decisiva para o sucesso da implantação do Serviço de Enfermagem no Hospital do Instituto de Aposentadoria e Pensões dos Empregados em Transportes e Cargas também contribuiu para reforçar sua posição no espaço hospitalar da capital federal no governo Dutra.El objeto de este estudio es la implementación del Servicio de Enfermería en el Hospital del Instituto de Aposentadoria e Pensões dos Empregados em Transportes e Cargas, actual Hospital Federal de Bonsucesso, en el periodo 1946-1948. Su objetivo es discutir la participación de la Escuela Ana Neri en ese proceso. Fuentes primarias: documentos escritos y testimonios orales. Las fuentes secundarias: bibliografías sobre el tema. Los enfoques teóricos y metodológicos se basaron en los conceptos de los sociólogos Pierre Bourdieu y María Cecilia Minayo. Era evidente que la contribución de la Escuela Ana Neri, además de decisiva para la exitosa implementación del Servicio de Enfermería en el Hospital del Instituto de Aposentadoria e Pensões dos Empregados em Transportes e Cargas también contribuyó para fortalecer su posición en el espacio hospitalario de la Capital Federal en el Gobierno Dutra.The object of this study is the implementation of the Nursing Service at the Hospital of the Institute of Retirement and Pension Employee Transport and Cargo current Federal Bonsucesso Hospital

CONTRIBUTING FACTORS TOWARDS DIFFICULTIES IN GENERATING IDEAS AMONG TECHNICAL STUDENTS

OpenAIRE

Yee Mei Heong

2013-01-01

Idea is a thought or collection of thoughts that are important to decision making and problem solving.  The purpose of this research was to analysis the factors contributing to difficulty in generating ideas among technical students.  A total of 375 technical students from four technical universities in Malaysia were randomly selected as samples.  A set of questionnaires was developed and used as research instrument.  The findings indicated that a total of 319 (85.1%) technical students faced...

Utópicas cidades de nossas andanças: flânerie e amizade no acompanhamento terapêutico

Directory of Open Access Journals (Sweden)

Analice de Lima Palombini

2009-08-01

Full Text Available Com base na experiência do acompanhamento terapêutico como uma clínica sem muros, imersa na cidade, o artigo centra-se no tema da cidade nas suas relações com a subjetividade. Valendo-se das elaborações de Benjamin sobre a flânerie e a idéia da amizade como política, presente em Foucault e Derrida, o texto assinala a importância, para a consecução dessa clínica, de se tomar em consideração a cidade como polis, aberta ao encontro com a diferença e, portanto, território de conflitos e negociação. Assim, a cidade como polis é a utopia que a clínica do acompanhamento terapêutico busca ativar.

Factors that Influence Women's Technical Skill Development in Outdoor Adventure

Science.gov (United States)

Warren, Karen; Loeffler, TA

2006-01-01

This article provides a theoretical foundation for understanding women's technical skill development (TSD) in outdoor adventure. An examination of societal and biological factors influencing women's TSD focuses on gender role socialization, sense of competence, technical conditioning, sexism, spatial ability, and risk-taking. The article suggests…

Factors that affect scrub practitioner non-technical skills: A literature review.

Science.gov (United States)

McClelland, Guy

2018-04-01

Non-technical skills are the cognitive and interpersonal behaviours that compliment clinical competence in surgery. Effective use of non-technical skills is essential for scrub practice, because they facilitate anticipation of the surgeon's requirements and promote appropriate communication behaviours. This literature review analyses the factors that may influence a scrub practitioner's use of non-technical skills during surgery. Recommendations are made that are intended to improve their use by reducing behavioural variations during surgery.

Final Report, Nuclear Energy Research Initiative (NERI) Project: An Innovative Reactor Analysis Methodology Based on a Quasidiffusion Nodal Core Model

International Nuclear Information System (INIS)

Anistratov, Dmitriy Y.; Adams, Marvin L.; Palmer, Todd S.; Smith, Kord S.; Clarno, Kevin; Hikaru Hiruta; Razvan Nes

2003-01-01

OAK (B204) Final Report, NERI Project: ''An Innovative Reactor Analysis Methodology Based on a Quasidiffusion Nodal Core Model'' The present generation of reactor analysis methods uses few-group nodal diffusion approximations to calculate full-core eigenvalues and power distributions. The cross sections, diffusion coefficients, and discontinuity factors (collectively called ''group constants'') in the nodal diffusion equations are parameterized as functions of many variables, ranging from the obvious (temperature, boron concentration, etc.) to the more obscure (spectral index, moderator temperature history, etc.). These group constants, and their variations as functions of the many variables, are calculated by assembly-level transport codes. The current methodology has two main weaknesses that this project addressed. The first weakness is the diffusion approximation in the full-core calculation; this can be significantly inaccurate at interfaces between different assemblies. This project used the nodal diffusion framework to implement nodal quasidiffusion equations, which can capture transport effects to an arbitrary degree of accuracy. The second weakness is in the parameterization of the group constants; current models do not always perform well, especially at interfaces between unlike assemblies. The project developed a theoretical foundation for parameterization and homogenization models and used that theory to devise improved models. The new models were extended to tabulate information that the nodal quasidiffusion equations can use to capture transport effects in full-core calculations

Not just trust: factors influencing learners' attempts to perform technical skills on real patients.

Science.gov (United States)

Bannister, Susan L; Dolson, Mark S; Lingard, Lorelei; Keegan, David A

2018-06-01

As part of their training, physicians are required to learn how to perform technical skills on patients. The previous literature reveals that this learning is complex and that many opportunities to perform these skills are not converted into attempts to do so by learners. This study sought to explore and understand this phenomenon better. A multi-phased qualitative study including ethnographic observations, interviews and focus groups was conducted to explore the factors that influence technical skill learning. In a tertiary paediatric emergency department, staff physician preceptors, residents, nurses and respiratory therapists were observed in the delivery and teaching of technical skills over a 3-month period. A constant comparison methodology was used to analyse the data and to develop a constructivist grounded theory. We conducted 419 hours of observation, 18 interviews and four focus groups. We observed 287 instances of technical skills, of which 27.5% were attempted by residents. Thematic analysis identified 14 factors, grouped into three categories, which influenced whether residents attempted technical skills on real patients. Learner factors included resident initiative, perceived need for skill acquisition and competing priorities. Teacher factors consisted of competing priorities, interest in teaching, perceived need for residents to acquire skills, attributions about learners, assessments of competency, and trust. Environmental factors were competition from other learners, judgement that the patient was appropriate, buy-in from team members, consent from patient or caregivers, and physical environment constraints. Our findings suggest that neither the presence of a learner in a clinical environment nor the trust of the supervisor is sufficient to ensure the learner will attempt a technical skill. We characterise this phenomenon as representing a pool of opportunities to conduct technical skills on live patients that shrinks to a much smaller pool of

IRIS International Reactor Innovative and Secure Final Technical Progress Report

International Nuclear Information System (INIS)

Carelli, M.D.

2003-01-01

OAK-B135 This NERI project, originally started as the Secure Transportable Autonomous Light Water Reactor (STAR-LW) and currently known as the International Reactor Innovative and Secure (IRIS) project, had the objective of investigating a novel type of water-cooled reactor to satisfy the Generation IV goals: fuel cycle sustainability, enhanced reliability and safety, and improved economics. The research objectives over the three-year (1999-2002) program were as follows: First year: Assess various design alternatives and establish main characteristics of a point design; Second year: Perform feasibility and engineering assessment of the selected design solutions; Third year: Complete reactor design and performance evaluation, including cost assessment These objectives were fully attained and actually they served to launch IRIS as a full fledged project for eventual commercial deployment. The program did not terminate in 2002 at the end of the NERI program, and has just entered in its fifth year. This has been made possible by the IRIS project participants which have grown from the original four member, two-countries team to the current twenty members, nine countries consortium. All the consortium members work under their own funding and it is estimated that the value of their in-kind contributions over the life of the project has been of the order of $30M. Currently, approximately 100 people worldwide are involved in the project. A very important constituency of the IRIS project is the academia: 7 universities from four countries are members of the consortium and five more US universities are associated via parallel NERI programs. To date, 97 students have worked or are working on IRIS; 59 IRIS-related graduate theses have been prepared or are in preparation, and 41 of these students have already graduated with M.S. (33) or Ph.D. (8) degrees. This ''final'' report (final only as far as the NERI program is concerned) summarizes the work performed in the first four

The impact of non-discretionary factors on DEA and SFA technical efficiency differences.

Science.gov (United States)

Kontodimopoulos, Nick; Papathanasiou, Nikolaos D; Flokou, Angeliki; Tountas, Yannis; Niakas, Dimitris

2011-10-01

The purpose of this study was to examine if factors of the external operating environment can explain differences in technical efficiency derived from Data Envelopment Analysis (DEA) and Stochastic Frontier Analysis (SFA). In a sample of 124 dialysis facilities, technical efficiency was compared according to ownership, region, years in operation and size. With second-stage Tobit regression, DEA and SFA efficiency was regressed against these environmental factors to determine their potential for predicting technical efficiency, as well as the efficiency differences between the two frontier methods. DEA expectedly generated lower mean efficiency scores than SFA (68.2% vs. 79.4%, P DEA-SFA efficiency differences was explained by environmental factors. This suggests that in addition to market instabilities, luck, and other related phenomena, decision-makers in their effort to determine optimal resource allocation, should point their attention to the potentially useful insight provided by environmental factors.

Pareto analysis of critical factors affecting technical institution evaluation

Directory of Open Access Journals (Sweden)

Victor Gambhir

2012-08-01

Full Text Available With the change of education policy in 1991, more and more technical institutions are being set up in India. Some of these institutions provide quality education, but others are merely concentrating on quantity. These stakeholders are in a state of confusion about decision to select the best institute for their higher educational studies. Although various agencies including print media provide ranking of these institutions every year, but their results are controversial and biased. In this paper, the authors have made an endeavor to find the critical factors for technical institution evaluation from literature survey. A Pareto analysis has also been performed to find the intensity of these critical factors in evaluation. This will not only help the stake holders in taking right decisions but will also help the management of institutions in benchmarking for identifying the most important critical areas to improve the existing system. This will in turn help Indian economy.

Gender factors influencing technical efficiency of cassava farmers in ...

African Journals Online (AJOL)

This work was therefore conducted in Akwa Ibom state to examine factors influencing the technical efficiency of farmer groups in cassava production. In carrying out the study, 120 respondents were randomly selected from two agricultural zones in the State and interviewed with interview schedule. Data were analyzed using ...

I-NERI QUARTERLY TECHNICAL PROGRESS REPORT - JANUARY 1 - MARCH 31, 2005

International Nuclear Information System (INIS)

Chang Oh

2005-01-01

codes. The three categories of experiments were performed in the facility; (1) upper pool cooling trip test, (2) LOFC experiment, (3) emissivity measurement experiment. (C) Prof. NO continued Task 3. (Prof NO) The experimental work of air ingress is going on without any concern: Geometry and size effect test has been completed. The conversion factor for internal surface area was obtained through this experiment. Burn-off test was performed and the uniformity of internal reaction was confirmed. (D) INEEL engineers continued to extend the diffusion model for multiple chemical species and made some calculations. (E) Prof. Lee and Martin at University of Michigan continued to analyze the effect of the stochastic fuel on the neutronic analysis and have initiated fuel depletion calculations for the VHTGR core. Progress during the past quarter includes: Further analysis of stochastic fuel geometry; Preliminary Monte Carlo depletion of full-core VHTGR; and Installation of MCNP5 on Unix cluster

Nuclear Energy Research Initiative (NERI) Program. Technical progress report

International Nuclear Information System (INIS)

Engelhardt, G.R.; MacDonald, D.D.

2000-01-01

During the past quartile the authors have explored the thermodynamics of various metal hydroxide and oxyhydroxide dehydration reactions of iron, nickel, and chromium with the objective of estimating the critical temperature, T(sub cr). This is the temperature at which the oxide is in equilibrium with the oxyhydroxide or hydroxide and water vapor under the expected repository conditions of temperature and pressure. Because localized corrosion requires the presence of an ionically conducting phase on the surface (to support oxygen reduction) T(sub cr) is also the temperature below which ''wet'' corrosion first becomes possible. Past analyses have assumed that wet corrosion requires the presence of a layer of bulk water on the surface and hence that corrosion is not possible at temperatures above the boiling temperature of bulk water under the prevailing atmospheric pressure. Furthermore, significant elevation of the boiling temperature may occur if the aqueous phase becomes concentrated in salts. Because of the hydration of hygroscopic corrosion products, which may occur at significantly higher temperatures than the boiling temperature of water, and because of boiling temperature elevation effects, the past assumption needs to be reevaluated. This is the primary goal of this work

Technical factors that affect anastomotic integrity following esophagectomy: systematic review and meta-analysis.

Science.gov (United States)

Markar, Sheraz R; Arya, Shobhit; Karthikesalingam, Alan; Hanna, George B

2013-12-01

Due to the significant contribution of anastomotic leak, with its disastrous consequences to patient morbidity and mortality, multiple parameters have been proposed and individually meta-analyzed for the formation of the ideal esophagogastric anastomosis following cancer resection. The purpose of this pooled analysis was to examine the main technical parameters that impact on anastomotic integrity. Medline, Embase, trial registries, and conference proceedings were searched. Technical factors evaluated included hand-sewn versus stapled esophagogastric anastomosis (EGA), cervical versus thoracic EGA, minimally invasive versus open esophagectomy, anterior versus posterior route of reconstruction and ischemic conditioning of the gastric conduit. The outcome of interest was the incidence of anastomotic leak, for which pooled odds ratios were calculated for each technical factor. No significant difference in the incidence of anastomotic leak was demonstrated for the following technical factors: hand-sewn versus stapled EGA, minimally invasive versus open esophagectomy, anterior versus posterior route of reconstruction and ischemic conditioning of the gastric conduit. Four randomized, controlled trials comprising 298 patients were included that compared cervical and thoracic EGA. Anastomotic leak was seen more commonly in the cervical group (13.64 %) than in the thoracic group (2.96 %). Pooled analysis demonstrated a significantly increased incidence of anastomotic leak in the cervical group (pooled odds ratio = 4.73; 95 % CI 1.61-13.9; P = 0.005). A tailored surgical approach to the patient's physiology and esophageal cancer stage is the most important factor that influences anastomotic integrity after esophagectomy.

Factors associated to performance efficacy of technical-tactical actions in volleyball

Directory of Open Access Journals (Sweden)

William das Neves Salles

2017-05-01

Full Text Available DOI: http://dx.doi.org/10.5007/1980-0037.2017v19n1p74   The aim of the study was to investigate the factors associated to performance efficacy of technical-tactical actions in volleyball. Based on the protocol of the Instrument for Technical and Tactical Performance Assessment in Volleyball (IAD-VB, 44.025 match actions performed by male and female athletes from u-15, u-16 and u-17 finalist teams of the 2010 Santa Catarina Volleyball Championship in Brazil were observed. Data were analyzed on SPPS 21 software using the logistic regression technique, adopting 5% significance level for the interpretation of results. Adjusted model explained 51.40% efficacy variance, and the factors associated with this variable were decision making, adjustment, efficiency, and competition level.

US Department of Energy nuclear energy research initiative

International Nuclear Information System (INIS)

Ross, F.

2001-01-01

This paper describes the Department of Energy's (DOE's) Nuclear Energy Research Initiative (NERI) that has been established to address and help overcome the principal technical and scientific issues affecting the future use of nuclear energy in the United States. (author)

An analysis of factors that influence the technical efficiency of Malaysian thermal power plants

International Nuclear Information System (INIS)

See, Kok Fong; Coelli, Tim

2012-01-01

The main objectives of this paper are to measure the technical efficiency levels of Malaysian thermal power plants and to investigate the degree to which various factors influence efficiency levels in these plants. Stochastic frontier analysis (SFA) methods are applied to plant-level data over an eight year period from 1998 to 2005. This is the first comprehensive analysis (to our knowledge) of technical efficiency in the Malaysian electricity generation industry using parametric method. Our empirical results indicate that ownership, plant size and fuel type have a significant influence on technical efficiency levels. We find that publicly-owned power plants obtain average technical efficiencies of 0.68, which is lower than privately-owned power plants, which achieve average technical efficiencies of 0.88. We also observe that larger power plants with more capacity and gas-fired power plants tend to be more technically efficient than other power plants. Finally, we find that plant age and peaking plant type have no statistically significant influence on the technical efficiencies of Malaysian thermal power plants. - Highlights: ► We examine the technical efficiency (TE) levels of Malaysian thermal power plants. ► We also investigate the degree to which various factors influence efficiency levels in these plants. ► Stochastic frontier analysis methods are used. ► Average plant would have to increase their TE level by 21% to reach the efficient frontier. ► Ownership, plant size and fuel type have a significant influence on the TE levels.

Non-technical success factors for bioenergy projects—Learning from a multiple case study in Japan

International Nuclear Information System (INIS)

Blumer, Yann B.; Stauffacher, Michael; Lang, Daniel J.; Hayashi, Kiyotada; Uchida, Susumu

2013-01-01

There is wide agreement in the literature that non-technical factors play a decisive role in the successful implementation of bioenergy projects. One underlying reason is that such projects require the involvement of many stakeholders, such as feedstock producers, engineers, authorities and the concerned public. We analyze the role of bioenergy-specific non-technical factors for the success of bioenergy projects. In a broad literature review we first identify potential success factors belonging to the five dimensions project characteristics, policy framework, regional integration, public perception and stakeholders. Using these factors as conceptual framework, we next analyze six Japanese pilot projects for bioenergy utilization supported by Japans Agriculture, Forestry and Fisheries Research Council. We apply Rough Set Analysis, a data mining method that can be used for small sample sizes to identify patterns in a dataset. We find that, by and large, non-technical factors from all five dimensions – such as the stability of the local policy framework – co-occur with project success. Furthermore, we show that there are diverging interpretations as to what success in a bioenergy project means. This requires tradeoffs between various goals, which should be identified and addressed explicitly at early stages of such a project. - Highlights: • We collect a broad list of non-technical success factors for bioenergy projects. • These are applied to six pilot projects in Japan and shown to be relevant. • We acknowledge different aspects of project success and their potential conflicts

Factors that influence the non-technical skills performance of scrub nurses: a prospective study.

Science.gov (United States)

Kang, Evelyn; Massey, Debbie; Gillespie, Brigid M

2015-12-01

To identify and describe the factors that impact on the performance of scrub nurses' non-technical skills performance during the intra-operative phase of surgery. Non-technical skills have been identified as important precursors to errors in the operating room. However, few studies have investigated factors influencing non-technical skills of scrub nurses. Prospective observational study. Structured observations were performed on a sample of 182 surgical procedures across eight specialities by two trained observers from August 2012-April 2013 at two hospital sites. Participants were purposively selected scrub nurses. Bivariate correlations and a multiple linear regression model were used to identify associations among length of surgery, patients' acuity using the American Society of Anesthesiologists classification system, team familiarity, number of occasions scout nurses leave the operating room, change of scout nurse and the outcome, the non-technical skills performance of scrub nurses. Patient acuity and team familiarity were the strongest predictors of scrub nurses' non-technical skills performance at hospital site A. There were no correlations between the predictors and the performance of scrub nurses at hospital site B. A dedicated surgical team and patient acuity potentially influence the performance of scrub nurses' non-technical skills. Familiarity with team members foster advanced planning, thus minimizing distractions and interruptions that impact on scrub nurses' performance. Development of interventions aimed at improving non-technical skills has the potential to make a substantial difference and enhance patient care. © 2015 John Wiley & Sons Ltd.

The potential impacts of grid-connected distributed generation and how to address them: A review of technical and non-technical factors

International Nuclear Information System (INIS)

Passey, Robert; Spooner, Ted; MacGill, Iain; Watt, Muriel; Syngellakis, Katerina

2011-01-01

Distributed generation is being deployed at increasing levels of penetration on electricity grids worldwide. It can have positive impacts on the network, but also negative impacts if integration is not properly managed. This is especially true of photovoltaics, in part because it's output fluctuates significantly and in part because it is being rapidly deployed in many countries. Potential positive impacts on grid operation can include reduced network flows and hence reduced losses and voltage drops. Potential negative impacts at high penetrations include voltage fluctuations, voltage rise and reverse power flow, power fluctuations, power factor changes, frequency regulation and harmonics, unintentional islanding, fault currents and grounding issues. This paper firstly reviews each of these impacts in detail, along with the current technical approaches available to address them. The second section of this paper discusses key non-technical factors, such as appropriate policies and institutional frameworks, which are essential to effectively coordinate the development and deployment of the different technical solutions most appropriate for particular jurisdictions. These frameworks will be different for different jurisdictions, and so no single approach will be appropriate worldwide. - Highlights: → Distributed generation can have both positive and negative impacts on networks. → Technical solutions to address these negative impacts are discussed. → The required appropriate policies and institutional frameworks are discussed.

Ranking factors of an investment in cogeneration: sensitivity analysis ranking the technical and economical factors

International Nuclear Information System (INIS)

Sundberg, Gunnel

2001-01-01

A deregulation of the electricity market in Europe will result in increased competition among the power-producing companies. They will therefore carefully estimate the financial risk in an investment in new power-producing capability. One part of the risk assessment is to perform a sensitivity analysis. This paper presents a sensitivity analysis using factorial design, resulting in an assessment of the most important technical and economical factors affecting an investment in gas turbine combined cycle and a steam cycle fired by wood chips. The study is performed using a simulation model that optimises the operation of existing power plants and potential new investments to fulfil the desired heat demand. The local utility system analysed is a Swedish district heating system with 655 GWh y -1 heat demand. The conclusion is that to understand which of the technical and economical factors affect the investment, it is not sufficient to investigate the parameters of the studied plant, but also the parameters related to the competing plants. Both the individual effects of the factors and the effect of their interaction should be investigated. For the energy system studied the price of natural gas, price of wood chips and investment cost have the major influence on the profitability of the investment. (Author)

Software for automated evaluation of technical and economic performance factors of nuclear power plant units

International Nuclear Information System (INIS)

Cvan, M.; Zadrazil, J.; Barnak, M.

1989-01-01

Computer codes TEP V2, TEP EDU and TEP V1 are used especially in real-time evaluation of technical and economic performance factors of the power unit. Their basic functions include filtration of credibility of input data obtained by measurement, simultaneous calculation of flows of various types of energy, calculation of technical and economic factors, listings and filing of the results. Code ZMEK is designed for executing changes in the calculation constants file for codes TEP V2 and TEP EDU. Code TEP DEN is used in processing the complete daily report on the technical and economic performance factors of the unit. Briefly described are the basic algorithms of credibility filtration for the measured quantities, the methodology of fundamental balances and the method of guaranteeing the continuity of measurement. Experiences are given with the use of the codes, and the trends are outlined of their future development. (J.B.). 5 refs

The Measurement of Technical Efficiency and Effective Factors in Cucumber Greenhouse (Case Study: Eastern Azarbayjan Province

Directory of Open Access Journals (Sweden)

B. Abdollahi

2010-10-01

Full Text Available The purpose of this study was to estimate technical efficiency of cucumber greenhouses in Eastern Azarbayjan. In economic literature, it means the ratio of maximum output to the inputs. The objective of this research was to determinate the effective factors influencing it's inefficiency. The method of determination of deterministic and stochastic technical efficiency is corrected ordinary least squares (COLS and maximum likelihood (ML respectively. The average of technical efficiency in province’s cucumber greenhouse is approximately about 57 and 93 percent for deterministic and stochastic frontier method respectively. Production types had positive influence on technical inefficiency whereas experience of manager have negative influence on technical inefficiency.

Human and technical factors in the doses reduction and optimization at Cogema/Marcoule

International Nuclear Information System (INIS)

Bourgogne, J.L.

1998-01-01

In the case of Cogema/Marcoule, the constant decrease of radiation doses is attributed to three factors: technical with a surveillance system and doses optimization, relational with the promotion of confidence in teams of radiation protection services as an acceptation factor of radiation protection techniques and psychological with an evolution of minds towards the ALARA approach. (N.C.)

Risk factors for technical failure of endoscopic double self-expandable metallic stent placement by partial stent-in-stent method.

Science.gov (United States)

Kawakubo, Kazumichi; Kawakami, Hiroshi; Toyokawa, Yoshihide; Otani, Koichi; Kuwatani, Masaki; Abe, Yoko; Kawahata, Shuhei; Kubo, Kimitoshi; Kubota, Yoshimasa; Sakamoto, Naoya

2015-01-01

Endoscopic double self-expandable metallic stent (SEMS) placement by the partial stent-in-stent (PSIS) method has been reported to be useful for the management of unresectable hilar malignant biliary obstruction. However, it is technically challenging, and the optimal SEMS for the procedure remains unknown. The aim of this study was to identify the risk factors for technical failure of endoscopic double SEMS placement for unresectable malignant hilar biliary obstruction (MHBO). Between December 2009 and May 2013, 50 consecutive patients with MHBO underwent endoscopic double SEMS placement by the PSIS method. We retrospectively evaluated the rate of successful double SEMS placement and identified the risk factors for technical failure. The technical success rate for double SEMS placement was 82.0% (95% confidence interval [CI]: 69.2-90.2). On univariate analysis, the rate of technical failure was high in patients with metastatic disease and unilateral placement. Multivariate analysis revealed that metastatic disease was a significant risk factor for technical failure (odds ratio: 9.63, 95% CI: 1.11-105.5). The subgroup analysis after double guidewire insertion showed that the rate of technical success was higher in the laser-cut type SEMS with a large mesh and thick delivery system than in the braided type SEMS with a small mesh and thick delivery system. Metastatic disease was a significant risk factor for technical failure of double SEMS placement for unresectable MHBO. The laser-cut type SEMS with a large mesh and thin delivery system might be preferable for the PSIS procedure. © 2014 Japanese Society of Hepato-Biliary-Pancreatic Surgery.

Technical factors influencing cone packing density estimates in adaptive optics flood illuminated retinal images.

Directory of Open Access Journals (Sweden)

Marco Lombardo

Full Text Available PURPOSE: To investigate the influence of various technical factors on the variation of cone packing density estimates in adaptive optics flood illuminated retinal images. METHODS: Adaptive optics images of the photoreceptor mosaic were obtained in fifteen healthy subjects. The cone density and Voronoi diagrams were assessed in sampling windows of 320×320 µm, 160×160 µm and 64×64 µm at 1.5 degree temporal and superior eccentricity from the preferred locus of fixation (PRL. The technical factors that have been analyzed included the sampling window size, the corrected retinal magnification factor (RMFcorr, the conversion from radial to linear distance from the PRL, the displacement between the PRL and foveal center and the manual checking of cone identification algorithm. Bland-Altman analysis was used to assess the agreement between cone density estimated within the different sampling window conditions. RESULTS: The cone density declined with decreasing sampling area and data between areas of different size showed low agreement. A high agreement was found between sampling areas of the same size when comparing density calculated with or without using individual RMFcorr. The agreement between cone density measured at radial and linear distances from the PRL and between data referred to the PRL or the foveal center was moderate. The percentage of Voronoi tiles with hexagonal packing arrangement was comparable between sampling areas of different size. The boundary effect, presence of any retinal vessels, and the manual selection of cones missed by the automated identification algorithm were identified as the factors influencing variation of cone packing arrangements in Voronoi diagrams. CONCLUSIONS: The sampling window size is the main technical factor that influences variation of cone density. Clear identification of each cone in the image and the use of a large buffer zone are necessary to minimize factors influencing variation of Voronoi

Ranking of biomass pellets by integration of economic, environmental and technical factors

International Nuclear Information System (INIS)

Sultana, Arifa; Kumar, Amit

2012-01-01

Interest in biomass as a renewable energy source has increased recently in response to a need to reduce greenhouse gas (GHG) emissions. The objective of this study is to develop a multi-criteria assessment model and rank different biomass feedstock-based pellets, in terms of their suitability for use in large heat and power generation plants and show the importance of environmental, economical and technical factors in making decision about different pellets. Five pellet alternatives, each produced from a different sustainable biomass feedstock i.e., wood, straw, switchgrass, alfalfa and poultry litter, are ranked according to eleven criteria, using the Preference Ranking Organization Method for Enrichment and Evaluation (PROMETHEE). Both quantitative and qualitative criteria are considered, including environmental, technical and economic factors. Three scenarios, namely base case, environmental and economic, are developed by changing the weight assigned to different criteria. In the base case scenario, equal weights are assigned to each criterion. In the economic and environmental scenarios, more weight is given to the economic and environmental factors, respectively. Based on the PROMETHEE rankings, wood pellets are the best source of energy for all scenarios followed by switchgrass, straw, poultry litter and alfalfa pellets except economic scenario, where straw pellets held higher position than switchgrass pellets. Sensitivity analysis on weights, threshold values, preference function and production cost indicate that the ranking was stable. The ranking in all scenarios remained same when qualitative criteria were omitted from the model; this indicates the stronger influence of quantitative criteria. -- Highlights: ► This study ranks the pellets produced from different biomass feedstocks. ► The ranking of the pellets is based on technical, economical and environmental factors. ► This study uses PROMETHEE method for ranking pellets based on a range of

Engineering Technical Review Planning Briefing

Science.gov (United States)

Gardner, Terrie

2012-01-01

The general topics covered in the engineering technical planning briefing are 1) overviews of NASA, Marshall Space Flight Center (MSFC), and Engineering, 2) the NASA Systems Engineering(SE) Engine and its implementation , 3) the NASA Project Life Cycle, 4) MSFC Technical Management Branch Services in relation to the SE Engine and the Project Life Cycle , 5) Technical Reviews, 6) NASA Human Factor Design Guidance , and 7) the MSFC Human Factors Team. The engineering technical review portion of the presentation is the primary focus of the overall presentation and will address the definition of a design review, execution guidance, the essential stages of a technical review, and the overall review planning life cycle. Examples of a technical review plan content, review approaches, review schedules, and the review process will be provided and discussed. The human factors portion of the presentation will focus on the NASA guidance for human factors. Human factors definition, categories, design guidance, and human factor specialist roles will be addressed. In addition, the NASA Systems Engineering Engine description, definition, and application will be reviewed as background leading into the NASA Project Life Cycle Overview and technical review planning discussion.

Punctuation as readability and textuality factor in technical discourse

Directory of Open Access Journals (Sweden)

Carmen Sancho Guinda

2002-04-01

Full Text Available This paper studies the incidence of punctuation on the reading comprehension of technical discourse and its role as a factor of textuality. Starting out from the notions of textuality and punctuation functions formulated by different linguistic approaches, an analysis has been made to quantify the decoding skills and punctuating competence of 60 Aeronautical Engineering students, as well as to determine the nature and effects of their punctuation errors. The survey has been focused on the Full Stop, the comma and the hyphen due to their highly conflicting uses as regards the identification of immediate sentence constituents and semantic relationships. The results obtained suggest that most students have a poor knowledge of punctuation rules and little awareness of punctuation as a textual elementaffecting readability. Errors are in the main related to comma use and produced by transference, either of Spanish punctuating habits into English, or of individual prosodic patterns into writing, while meaning appears to be the prevailing punctuating criterion over sound and syntax. Punctuation proves an effective tool for the anticipation of implicit meanings and an untapped resource in the teaching of the diverse communicative and stylistic possibilities offered by technical texts.

Factors of Quality Improvement of the Foreign Language Teaching in Technical University

Directory of Open Access Journals (Sweden)

Ira R. Agasieva

2017-03-01

Full Text Available In the article the problem of quality of teaching and knowledge of the English language has been considered. The factors that influence the improvement of the quality of teaching and knowledge of the English language in a technical college, the use of various methods of enhancing the quality of teaching and knowledge of the English language has been analyzed. It has been distinguished the necessity of taking into account the factors such as emotional maturity of the student, the desire for success, student cognitive style, its consistency and independence.

Total Factor Productivity Growth, Technical Progress & Efficiency Change in Vietnam Coal Industry - Nonparametric Approach

Science.gov (United States)

Phuong, Vu Hung

2018-03-01

This research applies Data Envelopment Analysis (DEA) approach to analyze Total Factor Productivity (TFP) and efficiency changes in Vietnam coal mining industry from 2007 to 2013. The TFP of Vietnam coal mining companies decreased due to slow technological progress and unimproved efficiency. The decadence of technical efficiency in many enterprises proved that the coal mining industry has a large potential to increase productivity through technical efficiency improvement. Enhancing human resource training, technology and research & development investment could help the industry to improve efficiency and productivity in Vietnam coal mining industry.

Triiodothyronine radioimmunoassay. Comparison of the different factors between two technics

International Nuclear Information System (INIS)

Gehin-Fouque, F.; Etling, N.; Pradelles, P.; Bornet, H.

1980-01-01

Triiodothyronine concentration was determined in human serum and in thyroid extracts by two radioimmunoassay technics. Both antibodies, radioactive T 3 , stable T 3 , protein-binding-hormone inhibitors, methods used to separate the free from the bound fractions were different. Each factor from a method was substituted to the homologue of the other method. The results occasionnally showed a variation of 32% in the first method and 50% in the second one. However the results gave a correct interpretation of the triiodothyronine values measured in human serum and in thyroid extracts [fr

[Analysis of work-related fatigue characteristics and its influencing factors in scientific and technical personnel].

Science.gov (United States)

Yang, Ting; Zhou, Dinglun; Song, Mingying; Lan, Yajia

2015-02-01

To investigate the current status and characteristics of work-related fatigue among scientific and technical personnel and its associated factors, and to provide a scientific basis for further interventions. A cross-sectional survey was conducted in the staff from a single scientific institution, using a self-administered questionnaire. Basic information of participants, Fatigue Scale-14, and Job Content Questionnaire were collected. The prevalence of work-related fatigue among the scientific and technical personnel was 54.6%; work-related fatigue was positively correlated with occupational stress (rs = 0.384, P work-related fatigue included occupational stress profiles, social support, and educational status. A higher risk of work-related fatigue was found in the staff under high stress, compared with those under low stress (OR = 8.5, 95%CI = 3.9∼18.7). Social support served as a protective factor for work-related fatigue, while a higher level of education was correlated with more severe work-related fatigue. Work-related fatigue is common and serious among scientific and technical personnel, especially in those under high stress. Effective interventions according to occupational stress are of great importance to reduce work-related fatigue.

Determinant Factors of Technical-Tactical Combinations Frequency in standing position during Womens World Senior Championships 2009

Directory of Open Access Journals (Sweden)

David Eduardo López González

2011-03-01

Full Text Available Abstract Objective. To classify the perfomance  of world class women wrestlers as the frequency and characteristics of their Technical-Tactical Combinations (TTC with effectiveness in the standing position during the most important competition on the international calendar 2009.Methods.  In the TTC were characterized all standing position effectives by a sample of 70 wrestlers, occupants of the top 10 in each of the 7 weight categories convened. Descriptive variables were used 5 of effectiveness, technical group, and characteristics of its phases. Variables were obtained determining the effectiveness, measured the "success rate" achieved by each fighter, all through factor analysis. Later wrestlers were classified by cluster analysis by Ward's method.Results. The most important factor related to get a medal  was the execution of legs attacks of with several possible endings started with almost no contact with the opponent, followed by the use of low-risk attacks launched from a firm grip. The wrestlers opted mostly for defense and counter low risk. Most of the competitors who had good results using several and alternative projections also managed to end their attacks.Conclusions. Characterization Model used and the factors of effectiveness in the fight standing obtained provided detailed explanations of the performance characteristics of the best wrestlers in the Senior World Championships 2009. The design of this research can be applied year after year in both freestyle and women's.Key words: Technical - Tactical Combinations, Rules, Fighting Women, Factor Analysis and Effectiveness

Determinant Factors of Technical-Tactical Combinations Frequency in standing position during Womens World Senior Championships 2009

Directory of Open Access Journals (Sweden)

David Eduardo López González

2011-03-01

Full Text Available Abstract  Objective. To classify the perfomance  of world class women wrestlers as the frequency and characteristics of their Technical-Tactical Combinations (TTC with effectiveness in the standing position during the most important competition on the international calendar 2009. Methods.  In the TTC were characterized all standing position effectives by a sample of 70 wrestlers, occupants of the top 10 in each of the 7 weight categories convened. Descriptive variables were used 5 of effectiveness, technical group, and characteristics of its phases. Variables were obtained determining the effectiveness, measured the "success rate" achieved by each fighter, all through factor analysis. Later wrestlers were classified by cluster analysis by Ward's method. Results. The most important factor related to get a medal  was the execution of legs attacks of with several possible endings started with almost no contact with the opponent, followed by the use of low-risk attacks launched from a firm grip. The wrestlers opted mostly for defense and counter low risk. Most of the competitors who had good results using several and alternative projections also managed to end their attacks. Conclusions. Characterization Model used and the factors of effectiveness in the fight standing obtained provided detailed explanations of the performance characteristics of the best wrestlers in the Senior World Championships 2009. The design of this research can be applied year after year in both freestyle and women's. Key words: Technical - Tactical Combinations, Rules, Fighting Women, Factor Analysis and Effectiveness

Technical innovation and management

Energy Technology Data Exchange (ETDEWEB)

Yoon, Yang Cheol

1982-08-15

This book gives explanations of the conception of technical innovation, development plan in Korea, connection between technology and a growth factor in national income, problem of technical innovation in developing country, analysis on cooperation between a developed country and a developing country, evaluation and strategy of technical development in Korea, technical innovation of industry, management of technical industry, analysis of special condition in Korea.

Technical innovation and management

International Nuclear Information System (INIS)

Yoon, Yang Cheol

1982-08-01

This book gives explanations of the conception of technical innovation, development plan in Korea, connection between technology and a growth factor in national income, problem of technical innovation in developing country, analysis on cooperation between a developed country and a developing country, evaluation and strategy of technical development in Korea, technical innovation of industry, management of technical industry, analysis of special condition in Korea.

Effects of Demographic Characteristics, Educational Background, and Supporting Factors on ICT Readiness of Technical and Vocational Teachers in Malaysia

Science.gov (United States)

Alazzam, Abu-Obaideh; Bakar, Ab Rahim; Hamzah, Ramlah; Asimiran, S.

2012-01-01

The aim of this study was to examine ICT readiness and the effects of demographic characteristics, educational background, and support factors on the ICT readiness of technical and vocational teachers in Malaysia. The questionnaire was administered to 329 technical and vocational teachers who are teaching engineering subjects in Malaysian…

The value of exchange visits of stakeholders in the education and training process in the area of radiation protection and safety culture

International Nuclear Information System (INIS)

Duranova, T.; Bohunova, J.

2014-01-01

Exchange visits offer a bundle of benefits, well beyond just acquiring information. The value of exchange visits of stakeholders in the education and training processes in the area of radiation protection and safety culture is demonstrated on the activities performed within the EC projects NERIS-TP and PREPARE under the umbrella of the European NERIS Platform. The technical visits to the affected regions of Belarus close to Chernobyl NPP as well as Fukushima Mission 2013 on the FAIRDO and ISAP 2013 in Japan illustrate well the methods of wide range of stakeholders engagement and involvement in the area of radiation control and practical radiological culture and their benefit in the education and training process. These visits have created common understanding, relationships forged in the hardships of shared experience, commitments to new approaches, and friendships as foundation for future networking. Technical visits allowed Slovak stakeholders and Belorussian hosts to focus time and attention on a topic, learning deeply, sharing ideas, and assessing the relevance of new approaches in the area of the post-accident management and rehabilitation with the main goal of improvement both national and local plans for preparedness and recovery. The technical or study visits for education and training purpose are valuable in the process of enhancement of the radiation protection and safely culture. (authors)

The value of exchange visits of stakeholders in the education and training processes in the area of radiation protection and safety culture

International Nuclear Information System (INIS)

Duranova, T.; Bohunova, J.

2014-01-01

Exchange visits offer a bundle of benefits, well beyond just acquiring information. The value of exchange visits of stakeholders in the education and training processes in the area of radiation protection and safety culture is demonstrated on the activities performed within the EC projects NERIS-TP and PREPARE under the umbrella of the European NERIS Platform. The technical visits to the affected regions of Belarus close to Chernobyl NPP as well as Fukushima Mission 2013 on the FAIRDO and ISAP 2013 in Japan illustrate well the methods of wide range of stakeholders engagement and involvement in the area of radiation control and practical radiological culture and their benefit in the education and training process. These visits have created common understanding, relationships forged in the hardships of shared experience, commitments to new approaches, and friendships as foundation for future networking. Technical visits allowed Slovak stakeholders and Belorussian hosts to focus time and attention on a topic, learning deeply, sharing ideas, and assessing the relevance of new approaches in the area of the post-accident management and rehabilitation with the main goal of improvement both national and local plans for preparedness and recovery. The technical or study visits for education and training purpose are valuable in the process of enhancement of the radiation protection and safely culture. (authors)

Main clinical, therapeutic and technical factors related to patient's maximum skin dose in interventional cardiology procedures

Science.gov (United States)

Journy, N; Sinno-Tellier, S; Maccia, C; Le Tertre, A; Pirard, P; Pagès, P; Eilstein, D; Donadieu, J; Bar, O

2012-01-01

Objective The study aimed to characterise the factors related to the X-ray dose delivered to the patient's skin during interventional cardiology procedures. Methods We studied 177 coronary angiographies (CAs) and/or percutaneous transluminal coronary angioplasties (PTCAs) carried out in a French clinic on the same radiography table. The clinical and therapeutic characteristics, and the technical parameters of the procedures, were collected. The dose area product (DAP) and the maximum skin dose (MSD) were measured by an ionisation chamber (Diamentor; Philips, Amsterdam, The Netherlands) and radiosensitive film (Gafchromic; International Specialty Products Advanced Materials Group, Wayne, NJ). Multivariate analyses were used to assess the effects of the factors of interest on dose. Results The mean MSD and DAP were respectively 389 mGy and 65 Gy cm−2 for CAs, and 916 mGy and 69 Gy cm−2 for PTCAs. For 8% of the procedures, the MSD exceeded 2 Gy. Although a linear relationship between the MSD and the DAP was observed for CAs (r=0.93), a simple extrapolation of such a model to PTCAs would lead to an inadequate assessment of the risk, especially for the highest dose values. For PTCAs, the body mass index, the therapeutic complexity, the fluoroscopy time and the number of cine frames were independent explanatory factors of the MSD, whoever the practitioner was. Moreover, the effect of technical factors such as collimation, cinematography settings and X-ray tube orientations on the DAP was shown. Conclusion Optimising the technical options for interventional procedures and training staff on radiation protection might notably reduce the dose and ultimately avoid patient skin lesions. PMID:22457404

The socio-technical system and nuclear safety

International Nuclear Information System (INIS)

Stefanescu, Petre; Mihailescu, Nicolae; Dragusin, Octavian

1999-01-01

In the field of nuclear safety there have been defined notions like 'technical factors' and 'human factors'. The technical factors depend on designing and manufacturing of components/equipment, actually depend on the people's work. The study of human factors consists in analyzing and recommending the terms that allow an individual to be a reliable and safety agent. Accordingly, he/she is placed in working conditions corresponding to human abilities, associating the means of three levels: - designing, i.e. the action upon the technical system and upon work organization; - correction, i.e. the action upon the evolution of the technical system and organizing; - formation/training, i.e. action upon operators. The paper presents a characterization of the socio-technical system and on this basis discusses the issue of individual adjustment to the socio-technical system and reciprocally, the issue of the socio-technical system adjustment to the individual. Concepts as: ergonomics, physical medium, man/machine interface and support of the operator, man/machine task sharing, the work organizing are put in relation with the central subject, the nuclear safety

Final Technical Report for the MIT Annular Fuel Research Project

International Nuclear Information System (INIS)

Mujid S. Kazimi; Pavel Hejzlar

2008-01-01

MIT-NFC-PR-082 (January 2006) Abstract This summary provides an overview of the results of the U.S. DOE funded NERI (Nuclear Research Energy Initiative) program on development of the internally and externally cooled annular fuel for high power density PWRs. This new fuel was proposed by MIT to allow a substantial increase in power density (on the order of 30% or higher) while maintaining or improving safety margins. A comprehensive study was performed by a team consisting of MIT (lead organization), Westinghouse Electric Corporation, Gamma Engineering Corporation, Framatome ANP(formerly Duke Engineering) and Atomic Energy of Canada Limited

Critical Success Factors for the Large-Scale Introduction of Grid-Connected Photovoltaic Systems. A survey focusing on the non-technical aspects

International Nuclear Information System (INIS)

Groenendaal, B.J.; De Lange, T.J.; Lako, P.; Van Roosmalen, J.A.M.; Tool, C.J.J.; De Wild-Scholten, M.J.

2000-11-01

The differences in Significance and Status of 15 factors that might be of decisive influence in achieving a large-scale market introduction of grid-connected photovoltaic (PV) systems are analyzed. As a research method the opinions of PV experts and persons involved in the implementation of PV have been surveyed. A questionnaire was sent to about 300 persons all over the world (America, Europe and Asia). The methods applied to analyze the returned questionnaires can be divided into a comparing method (Mann-Whitney test) and ranking methods (Friedman test and the Medal-Classification test). One of the main conclusion is that the ranking of the main critical success factors on Significance shows no large differences between the American and European respondents. The answers from the American and European respondents show that the technical and financial factors are the most Significant: RD and D, technical reliability, financing and cost reduction. The Asian ranking does differ from the American and European ranking. The answers from the Asian respondents show that the international factors: global developments and internationalisation together with specialist knowledge and image are the most Significant success factors. Another main conclusion is that the three regions differ in the ranking of the actual Status of the factors. A comparison of the American ranking with the Asian ranking show the largest differences, whereas Europe is taking an intermediary position. Another interesting observation is that the Status of factors, e.g. internationalisation, global developments and the technical/commercial network, are considered more positive in America, whereas Asia and Europe are more positive about the factors RD and D, image and financing. More specific conclusions show that there is a significant difference in answers between the American and European respondents about the Significance of the factor cost reduction. There is also a significant difference between the

Variations of Histone Modification Patterns: Contributions of Inter-plant Variability and Technical Factors

Directory of Open Access Journals (Sweden)

Sylva Brabencová

2017-12-01

Full Text Available Inter-individual variability of conspecific plants is governed by differences in their genetically determined growth and development traits, environmental conditions, and adaptive responses under epigenetic control involving histone post-translational modifications. The apparent variability in histone modifications among plants might be increased by technical variation introduced in sample processing during epigenetic analyses. Thus, to detect true variations in epigenetic histone patterns associated with given factors, the basal variability among samples that is not associated with them must be estimated. To improve knowledge of relative contribution of biological and technical variation, mass spectrometry was used to examine histone modification patterns (acetylation and methylation among Arabidopsis thaliana plants of ecotypes Columbia 0 (Col-0 and Wassilewskija (Ws homogenized by two techniques (grinding in a cryomill or with a mortar and pestle. We found little difference in histone modification profiles between the ecotypes. However, in comparison of the biological and technical components of variability, we found consistently higher inter-individual variability in histone mark levels among Ws plants than among Col-0 plants (grown from seeds collected either from single plants or sets of plants. Thus, more replicates of Ws would be needed for rigorous analysis of epigenetic marks. Regarding technical variability, the cryomill introduced detectably more heterogeneity in the data than the mortar and pestle treatment, but mass spectrometric analyses had minor apparent effects. Our study shows that it is essential to consider inter-sample variance and estimate suitable numbers of biological replicates for statistical analysis for each studied organism when investigating changes in epigenetic histone profiles.

Variations of Histone Modification Patterns: Contributions of Inter-plant Variability and Technical Factors.

Science.gov (United States)

Brabencová, Sylva; Ihnatová, Ivana; Potěšil, David; Fojtová, Miloslava; Fajkus, Jiří; Zdráhal, Zbyněk; Lochmanová, Gabriela

2017-01-01

Inter-individual variability of conspecific plants is governed by differences in their genetically determined growth and development traits, environmental conditions, and adaptive responses under epigenetic control involving histone post-translational modifications. The apparent variability in histone modifications among plants might be increased by technical variation introduced in sample processing during epigenetic analyses. Thus, to detect true variations in epigenetic histone patterns associated with given factors, the basal variability among samples that is not associated with them must be estimated. To improve knowledge of relative contribution of biological and technical variation, mass spectrometry was used to examine histone modification patterns (acetylation and methylation) among Arabidopsis thaliana plants of ecotypes Columbia 0 (Col-0) and Wassilewskija (Ws) homogenized by two techniques (grinding in a cryomill or with a mortar and pestle). We found little difference in histone modification profiles between the ecotypes. However, in comparison of the biological and technical components of variability, we found consistently higher inter-individual variability in histone mark levels among Ws plants than among Col-0 plants (grown from seeds collected either from single plants or sets of plants). Thus, more replicates of Ws would be needed for rigorous analysis of epigenetic marks. Regarding technical variability, the cryomill introduced detectably more heterogeneity in the data than the mortar and pestle treatment, but mass spectrometric analyses had minor apparent effects. Our study shows that it is essential to consider inter-sample variance and estimate suitable numbers of biological replicates for statistical analysis for each studied organism when investigating changes in epigenetic histone profiles.

New usable technical specifications

International Nuclear Information System (INIS)

Webster, S.A.; Tomasi, L.T.; Bernier, R.A.

1989-01-01

After 2 yr of preparation, 1988 finally saw the nuclear industry writing operator-oriented technical specifications. This effort is a continuation of previous efforts to develop improved and usable standard technical specifications (STSs), and is being conducted by the four nuclear steam supply system vendor owners' groups under the auspices of the Nuclear Management Resources Council. Each participant is currently preparing a set of improved STSs based on a writer's guide that was developed through a combined industry effort. In May of 1987, a Human Factors Improvements to Technical Specifications (HFITS) task group was formed to prepare a writer's guide for improved, industrywide STSs. This task group was composed of two representatives from each owners' group, one with a human factors background and one with some operations background. Two documents were prepared in 6 months, a human factors report laying the groundwork for the considerations to go into technical specifications and a writer's guide for their preparation. This paper reports on the application of this writer's guide to the writing of improved STS

Direct energy conversion in fission reactors: A U.S. NERI project

International Nuclear Information System (INIS)

Slutz, Stephen A.; Seidel, David B.; Polansky, Gary F.; Rochau, Gary E.; Lipinski, Ronald J.; Besenbruch, G.; Brown, L.C.; Parish, T.A.; Anghaie, S.; Beller, D.E.

2000-01-01

In principle, the energy released by a fission can be converted directly into electricity by using the charged fission fragments. The first theoretical treatment of direct energy conversion (DEC) appeared in the literature in 1957. Experiments were conducted over the next ten years, which identified a number of problem areas. Research declined by the late 1960's due to technical challenges that limited performance. Under the Nuclear Energy Research Initiative the authors are determining if these technical challenges can be overcome with todays technology. The authors present the basic principles of DEC reactors, review previous research, discuss problem areas in detail, and identify technological developments of the last 30 years that can overcome these obstacles. As an example, the fission electric cell must be insulated to avoid electrons crossing the cell. This insulation could be provided by a magnetic field as attempted in the early experiments. However, from work on magnetically insulated ion diodes they know how to significantly improve the field geometry. Finally, a prognosis for future development of DEC reactors will be presented

The Effect of Non-technical Factors in B2C E-Commerce

Science.gov (United States)

Sanayei, Ali; Shafe'Ei, Reza

As e-commerce grows across industries worldwide , business are building web sites for presence as well as for online business. It is more than transferring current business operations to a new medium. This situation requires explaining main models, changing infrastructures, and notice to customer needs as their vital rights. Whilst increasing numbers of firms have launched themselves on the Internet, they are trying to consideration of the strategic implications of developing, implementing or running a Web site. Global competition, laws, and customer preferences are among the issues being affected by e-commerce. In this study many factors that effect on e-commerce are considered these factors have no technical issue in nature. Companies related factors, customers' knowledge, customers' trust and customers' behavior are the main effective factors in development of B2C e-commerce. In this research we surveyed the mentioned aspects by offering questionnaire to experts of e-commerce for companies. The results show there is a meaningful relationship between perception, knowledge, trust and attitude of customers and the company's capabilities in the other side with B2C e-commerce development.

Factors That Influence Technical Efficiency of Sorghum Production: A Case of Small Holder Sorghum Producers in Lower Eastern Kenya

Directory of Open Access Journals (Sweden)

Evaline Chepng’etich

2015-01-01

Full Text Available Majority of the rural households in Kenya depend on agriculture as a source of food and livelihood. Agricultural productivity has been declining due to many factors resulting in increased food insecurity in the country. Consequently, there is a renewed interest in promoting drought-tolerant crops such as sorghum which thrives in the arid and semiarid lands of the developing world. However, performance of sorghum production among the smallholder farmers has still remained low. This study was thus carried out to identify factors that influence technical efficiency of sorghum production among smallholder farmers in Machakos and Makindu districts of the lower eastern Kenya. Collected data on farm and farmer characteristics were analysed by use of descriptive statistics and Tobit model. Result highlights show that technical efficiency was influenced positively by formal education level of the household, experience in sorghum farming, membership in farmers associations, use of hired labour, production advice, and use of manure. Surprisingly household size, meant to enhance labour, had a negative influence. To increase technical efficiency, efforts should focus on improving information flows on agronomic practices. Farmers should also be encouraged to form and actively participate in various farmers associations, which enhance learning and pooling of labour resources, hence improving technical efficiency.

Simulator training and non-technical factors improve laparoscopic performance among OBGYN trainees.

Science.gov (United States)

Ahlborg, Liv; Hedman, Leif; Nisell, Henry; Felländer-Tsai, Li; Enochsson, Lars

2013-10-01

To investigate how simulator training and non-technical factors affect laparoscopic performance among residents in obstetrics and gynecology. In this prospective study, trainees were randomized into three groups. The first group was allocated to proficiency-based training in the LapSimGyn(®) virtual reality simulator. The second group received additional structured mentorship during subsequent laparoscopies. The third group served as control group. At baseline an operation was performed and visuospatial ability, flow and self-efficacy were assessed. All groups subsequently performed three tubal occlusions. Self-efficacy and flow were assessed before and/or after each operation. Simulator training was conducted at the Center for Advanced Medical Simulation and Training, Karolinska University Hospital. Sterilizations were performed at each trainee's home clinic. Twenty-eight trainees/residents from 21 hospitals in Sweden were included. Visuospatial ability was tested by the Mental Rotation Test-A. Flow and self-efficacy were assessed by validated scales and questionnaires. Laparoscopic performance was measured as the duration of surgery. Visuospatial ability, self-efficacy and flow were correlated to the laparoscopic performance using Spearman's correlations. Differences between groups were analyzed by the Mann-Whitney U-test. No differences across groups were detected at baseline. Self-efficacy scores before and flow scores after the third operation were significantly higher in the trained groups. Duration of surgery was significantly shorter in the trained groups. Flow and self-efficacy correlate positively with laparoscopic performance. Simulator training and non-technical factors appear to improve the laparoscopic performance among trainees/residents in obstetrics and gynecology. © 2013 Nordic Federation of Societies of Obstetrics and Gynecology.

Impact of Personal Characteristics and Technical Factors on Quantification of Sodium 18F-Fluoride Uptake in Human Arteries

DEFF Research Database (Denmark)

Blomberg, Björn Alexander; Thomassen, Anders; de Jong, Pim A

2015-01-01

Sodium (18)F-fluoride ((18)F-NaF) PET/CT imaging is a promising imaging technique for assessment of atherosclerosis, but is hampered by a lack of validated quantification protocols. Both personal characteristics and technical factors can affect quantification of arterial (18)F-NaF uptake....... This study investigated if blood activity, renal function, injected dose, circulating time, and PET/CT system affect quantification of arterial (18)F-NaF uptake. METHODS: Eighty-nine healthy subjects were prospectively examined by (18)F-NaF PET/CT imaging. Arterial (18)F-NaF uptake was quantified...... assessed the effect of personal characteristics and technical factors on quantification of arterial (18)F-NaF uptake. RESULTS: NaFmax and TBRmax/mean were dependent on blood activity (β = .34 to .44, P

Technical issues related to NUREG 0800, Chapter 18: Human Factors Engineering/Standard Review Plan

International Nuclear Information System (INIS)

Savage, J.W.

1982-01-01

The revision of Chapter 18 of NUREG 0800, Human Factors Engineering Standard Review Plan (SRP) will be based on SECY 82-111 and guidance contained in NUREG 0700, NUREG 0801 and NUREG 0835, plus other references. In conducting field reviews of control rooms, the NRC has identified technical issues which can be used to enhance the development of the revised version of NUREG 0800, and to establish priorities among the list of possible Branch Technical Positions (BTP) in NUREG 0800, Rev. 0, Table 18.0-2. This report is a compilation of comments and suggestions from the people who used NUREG 0700 in the Control Room field reviews. This information was used to establish possible BTP topic priorities so that the most important BTPs could be issued first. The comments and suggestions are included for HFEB review in conjunction with the table of priorities

Clarification of the technic of intrinsic factor radioimmunoassay for the cat and the rat

International Nuclear Information System (INIS)

Perrin, M.O.; Nicolas, J.P.; Dubrasquet, M.

1983-01-01

Cats and rats secrete very small quantities of gastric juice (GJ). In order to measure the Intrinsic Factor (IF) in GJ of animals certain modifications are necessary. It is very important to select with great care pernicious anemia sera which will be used to cross react with the animals' IF to determine their IF level by radioimmunoassay. The technic described here enables the dosage of low quantities of IF with a 7 per cent coefficient of variation [fr

EDI and the Technical Communicator.

Science.gov (United States)

Eiler, Mary Ann

1994-01-01

Assesses the role of technical communicators in electronic data interchange (EDI). Argues that, as experts in information design, human factors, instructional theory, and professional writing, technical communicators should be advocates of standard documentation protocols and should rethink the traditional concepts of "document" to…

A data envelope analysis to assess factors affecting technical and economic efficiency of individual broiler breeder hens.

Science.gov (United States)

Romero, L F; Zuidhof, M J; Jeffrey, S R; Naeima, A; Renema, R A; Robinson, F E

2010-08-01

This study evaluated the effect of feed allocation and energetic efficiency on technical and economic efficiency of broiler breeder hens using the data envelope analysis methodology and quantified the effect of variables affecting technical efficiency. A total of 288 Ross 708 pullets were placed in individual cages at 16 wk of age and assigned to 1 of 4 feed allocation groups. Three of them had feed allocated on a group basis with divergent BW targets: standard, high (standard x 1.1), and low (standard x 0.9). The fourth group had feed allocated on an individual bird basis following the standard BW target. Birds were classified in 3 energetic efficiency categories: low, average, and high, based on estimated maintenance requirements. Technical efficiency considered saleable chicks as output and cumulative ME intake and time as inputs. Economic efficiency of feed allocation treatments was analyzed under different cost scenarios. Birds with low feed allocation exhibited a lower technical efficiency (69.4%) than standard (72.1%), which reflected a reduced egg production rate. Feed allocation of the high treatment could have been reduced by 10% with the same chick production as the standard treatment. The low treatment exhibited reduced economic efficiency at greater capital costs, whereas high had reduced economic efficiency at greater feed costs. The average energetic efficiency hens had a lower technical efficiency in the low compared with the standard feed allocation. A 1% increment in estimated maintenance requirement changed technical efficiency by -0.23%, whereas a 1% increment in ME intake had a -0.47% effect. The negative relationship between technical efficiency and ME intake was counterbalanced by a positive correlation of ME intake and egg production. The negative relationship of technical efficiency and maintenance requirements was synergized by a negative correlation of hen maintenance and egg production. Economic efficiency methodologies are effective

Great Lakes water quality initiative technical support document for the procedure to determine bioaccumulation factors. Draft report

International Nuclear Information System (INIS)

1993-03-01

The purpose of the document is to provide the technical information and rationale in support of the proposed procedures to determine bioaccumulation factors. Bioaccumulation factors, together with the quantity of aquatic organisms eaten, determine the extent to which people and wildlife are exposed to chemicals through the consumption of aquatic organisms. The more bioaccumulative a pollutant is, the more important the consumption of aquatic organisms becomes as a potential source of contaminants to humans and wildlife. Bioaccumulation factors are needed to determine both human health and wildlife tier I water quality criteria and tier II values. Also, they are used to define Bioaccumulative Chemicals of Concern among the Great Lakes Initiative universe of pollutants. Bioaccumulation factors range from less than one to several million

Factors Influencing Choice of Occupational Area among Technical ...

African Journals Online (AJOL)

Interest in study area; perceived availability of job opportunities related to area of specialization; simplicity of area in training and in employment; and perceived affordability of equipment for self-employment were found to influence choice of occupational area among the two groups. Keywords: Technical Education; Career ...

Technical efficiency of selected hospitals in Eastern Ethiopia.

Science.gov (United States)

Ali, Murad; Debela, Megersa; Bamud, Tewfik

2017-12-01

This study examines the relative technical efficiency of 12 hospitals in Eastern Ethiopia. Using six-year-round panel data for the period between 2007/08 and 2012/13, this study examines the technical efficiency, total factor productivity, and determinants of the technical inefficiency of hospitals. Data envelopment analysis (DEA) and DEA- based Malmquist productivity index used to estimate relative technical efficiency, scale efficiency, and total factor productivity index of hospitals. Tobit model used to examine the determinants of the technical inefficiency of hospitals. The DEA Variable Returns to Scale (VRS) estimate indicated that 6 (50%), 5 (42%), 3 (25%), 3 (25%), 4 (33%), and 3 (25%) of the hospitals were technically inefficient while 9 (75%), 9 (75%), 7 (58%), 7 (58%), 7 (58%) and 8 (67%) of hospitals were scale inefficient between 2007/08 and 2012/13, respectively. On average, Malmquist Total Factor Productivity (MTFP) of the hospitals decreased by 3.6% over the panel period. The Tobit model shows that teaching hospital is less efficiency than other hospitals. The Tobit regression model further shows that medical doctor to total staff ratio, the proportion of outpatient visit to inpatient days, and the proportion of inpatients treated per medical doctor were negatively related with technical inefficiency of hospitals. Hence, policy interventions that help utilize excess capacity of hospitals, increase doctor to other staff ratio, and standardize number of inpatients treated per doctor would contribute to the improvement of the technical efficiency of hospitals.

Impact of Geotechnical Factors on the Safety of Low Embankment Dams From the Perspective of Technical and Safety Supervision

Directory of Open Access Journals (Sweden)

Kasana Andrej

2015-03-01

Full Text Available Our research deals with a broad spectrum of problems concerning the variability of geotechnical factors and their influence on the safety of the biggest group of dam constructions in Slovakia, i.e., low earthfill dams. Its specific aim is the observation of their risk factors by using our experience and knowledge gained while working in the sector of technical and safety supervision. To achieve the aims of a research thesis, we analyzed 39 low earthfill dams. We performed observations and documented their conditions with the aim of clarifying the risk factors. After an analysis of the information materials that characterize dams and after a statistical analysis of the measurement results in situ, including measurements from technical and safety supervision databases, we performed an analysis by using mathematical modeling to evaluate the safety of the dam constructions. Out of the total number of 39 dam constructions, an analysis of the stability of the dam slopes was performed on 37 dams, and deformation problems were analyzed on 28 of the dams. Filtration problems were analyzed at 26 dams, and a complete evaluation of the intensity of filtration movements was performed on 19 of the constructions.

Preoperative short hookwire placement for small pulmonary lesions: evaluation of technical success and risk factors for initial placement failure.

Science.gov (United States)

Iguchi, Toshihiro; Hiraki, Takao; Matsui, Yusuke; Fujiwara, Hiroyasu; Masaoka, Yoshihisa; Tanaka, Takashi; Sato, Takuya; Gobara, Hideo; Toyooka, Shinichi; Kanazawa, Susumu

2018-05-01

To retrospectively evaluate the technical success of computed tomography fluoroscopy-guided short hookwire placement before video-assisted thoracoscopic surgery and to identify the risk factors for initial placement failure. In total, 401 short hookwire placements for 401 lesions (mean diameter 9.3 mm) were reviewed. Technical success was defined as correct positioning of the hookwire. Possible risk factors for initial placement failure (i.e., requirement for placement of an additional hookwire or to abort the attempt) were evaluated using logistic regression analysis for all procedures, and for procedures performed via the conventional route separately. Of the 401 initial placements, 383 were successful and 18 failed. Short hookwires were finally placed for 399 of 401 lesions (99.5%). Univariate logistic regression analyses revealed that in all 401 procedures only the transfissural approach was a significant independent predictor of initial placement failure (odds ratio, OR, 15.326; 95% confidence interval, CI, 5.429-43.267; p < 0.001) and for the 374 procedures performed via the conventional route only lesion size was a significant independent predictor of failure (OR 0.793, 95% CI 0.631-0.996; p = 0.046). The technical success of preoperative short hookwire placement was extremely high. The transfissural approach was a predictor initial placement failure for all procedures and small lesion size was a predictor of initial placement failure for procedures performed via the conventional route. • Technical success of preoperative short hookwire placement was extremely high. • The transfissural approach was a significant independent predictor of initial placement failure for all procedures. • Small lesion size was a significant independent predictor of initial placement failure for procedures performed via the conventional route.

Resolution of digital instrumentation and control and human factors technical and regulatory issues for new plants and for modernization of operating plants

International Nuclear Information System (INIS)

Naser, J.A.; Torok, R.C.; Canavan, K.T.

2008-01-01

There are several technical and regulatory issues in the areas of digital I and C, human factors, and control rooms needing generic resolution. If they are not generically resolved, they can contribute to protracted regulatory reviews for operating plant license amendments and substantial delays and increased costs for new plant COL approvals. Therefore; a coordinated, proactive program has been established to resolve key issues. Both Industry and NRC have roles in resolving these key issues and addressing them in future design efforts and regulatory reviews. The Industry initiative is led by the NEI Digital I and C and Human Factors Working Group. NRC has established Task Working Groups under the NRC Digital I and C Steering Committee to address the issues and interact with Industry. EPRI is providing technical input and resolution leadership for some of the issues being addressed in three of the task working groups. For the Highly Integrated Control Room - Human Factors Task area, EPRI has taken the lead in developing draft industry position technical reports for the following three issues: 1) Minimum inventory of human system interfaces, 2) Computerized procedures and associated topics of automation and soft controls, and 3) Methodology to determine the acceptability of manual operator actions response times for a BTP 7-19 software common cause failure. For the Diversity and Defense-in-Depth area, EPRI has taken the lead in developing two draft industry position technical papers on the following topics: 1) Integrating defensive measures and diversity attributes to protect against digital common cause failures and 2) Susceptibility of digital devices and components to common cause failures. For the Risk Informing area, EPRI has taken the lead in developing two draft industry position technical papers on the following topics: 1) Clarifying how to use current methods to model digital systems in a PRA and 2) Application of PRA to specific digital I and C issues

Technical writing versus technical writing

Science.gov (United States)

Dillingham, J. W.

1981-01-01

Two terms, two job categories, 'technical writer' and 'technical author' are discussed in terms of industrial and business requirements and standards. A distinction between 'technical writing' and technical 'writing' is made. The term 'technical editor' is also considered. Problems inherent in the design of programs to prepare and train students for these jobs are discussed. A closer alliance between industry and academia is suggested as a means of preparing students with competent technical communication skills (especially writing and editing skills) and good technical skills.

Determination of aims military-technical policy of Ukraine

Directory of Open Access Journals (Sweden)

O. F. Salnikova

2014-06-01

Full Text Available In the article the aims of military-technical policy are considered. Determination of aims (tasks of military-technical policy, its maintenance, requirements to it and directions of its further development it must come true by the analysis of different factors of external and internal environment. Among such factors: geopolitical and military-political position of Ukraine and its military doctrine; realized and operating programs of development (reformation of the soldiery forming and them technical rigging; terms of future military operations and progress of their maintenance, forms, methods and characteristic signs of battle actions trend; substantive provisions of art of war; conceptions, theories and doctrines of battle application of the soldiery forming of the different states; resources dedicated by the state on development of military-technical sphere and others like that. The fundamental chart of sequence of forming of public military-technical policy is presented in the article.

Factors determining the long term back end nuclear fuel cycle strategy and future nuclear systems. Proceedings of a technical committee meeting

International Nuclear Information System (INIS)

2002-05-01

The Technical Committee Meeting (TCM) was held in Vienna on 8-10 November 1999; it was organized by the International Atomic Energy Agency and attended by 26 participants from 16 Member States. The purpose of the meeting was to exchange information among experts on the back end fuel cycle strategies adopted by Member States; to identify key factors determining the long-term back end fuel cycle strategies; and to assess the applicability of these factors to future nuclear systems. Issues associated with the back end fuel cycle supporting a country's nuclear power programme are technical, economic, institutional and political. This TCM provided an opportunity to address these issues and their impacts to the back end fuel cycles, as well as to identify and assess factors affecting the back end fuel cycle strategies. The discussion was organized ib the following topical sessions: the nuclear fuel cycle; spent fuel management; waste management and repository; plutonium management. This document contains a summary of the meeting and 22 individual papers presented by participants. Each of the papers was indexed separately

Factors determining the long term back end nuclear fuel cycle strategy and future nuclear systems. Proceedings of a technical committee meeting

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-05-01

The Technical Committee Meeting (TCM) was held in Vienna on 8-10 November 1999; it was organized by the International Atomic Energy Agency and attended by 26 participants from 16 Member States. The purpose of the meeting was to exchange information among experts on the back end fuel cycle strategies adopted by Member States; to identify key factors determining the long-term back end fuel cycle strategies; and to assess the applicability of these factors to future nuclear systems. Issues associated with the back end fuel cycle supporting a country's nuclear power programme are technical, economic, institutional and political. This TCM provided an opportunity to address these issues and their impacts to the back end fuel cycles, as well as to identify and assess factors affecting the back end fuel cycle strategies. The discussion was organized ib the following topical sessions: the nuclear fuel cycle; spent fuel management; waste management and repository; plutonium management. This document contains a summary of the meeting and 22 individual papers presented by participants. Each of the papers was indexed separately.

Taiwanese Technical Education Teachers' Professional Development: An Examination of Some Critical Factors

Science.gov (United States)

Chang, Jen-Chia; Yeh, Yu-Mei; Chen, Su-Chang; Hsiao, Hsi-Chi

2011-01-01

There is a lack of research in the area of the influence that task autonomy (TA), organizational learning (OL), and group cohesiveness (GC) can have on technical education teachers' innovation of professional development (IOPD). Therefore, this study aimed to probe into the influences of TA, OL, and GC on IOPD by technical education teachers, and…

Analysis of the Factors Influencing the Technical Efficiency of ...

African Journals Online (AJOL)

The study analyzed the relationship between technical efficiency of women rubber tappers in Rubber Research Institute of Nigeria, Benin City. A total of 60 women were selected through purposive and random sampling techniques and served with a structured interview schedule. Data collected were subjected to ...

Organizational factors influencing human performance in nuclear power plants. Report of a technical committee meeting

International Nuclear Information System (INIS)

1997-05-01

In 1991 a Safety Series report on Safety Culture of the International Nuclear Safety Advisory Group (INSAG) was published as 75-INSAG-4 by the IAEA. This report deals with the concept of Safety Culture as it relates to organizations and individuals involved in the operations of nuclear power plants (NPPs). Generally, the role of management and organization in assuring the safe operation of NPPs has been widely recognized and its importance accepted. However, the understanding of what constitutes effective management and organization the area of safety is less developed than the understanding of most of the technical issues which plant operators and regulatory bodies are confronted with. The Technical Committee meeting provided a forum for a broad exchange of information on practices and experiences in the area of organization and management to accomplish operational safety in NPPs and thus enhance Safety Culture. This report and the papers presented at the meeting discuss those factors which influence and improve human performance covering both aspects, i.e. the basic requirements imposed on the operator and the ways of managerial support which enhance the reliable and safety oriented performance of operators. Refs, figs, tabs

Marketing information: The technical report as product

Science.gov (United States)

Stoher, F. F.; Pinelli, T. E.

1981-01-01

Technical reports constitute a product, the primary means for communicating the results of research to the user. The Langley scientific and technical information (STI) review and evaluation project undertook a review of the technical report as an effective product for information communication. Style manuals describing theory and practice in technical report preparation; publication manuals covering such factors as design, layout, and type style; and copies of technical reports were obtained from industrial, academic, governmental, and research organizations. Based on an analysis of this material, criteria will be established for the report components, for the relationship of the components within the report context, and for the overall report organization. The criteria will be used as bench marks and compared with the publication standards currently used to prepare NASA technical reports.

ExternE transport methodology for external cost evaluation of air pollution

DEFF Research Database (Denmark)

Jensen, S. S.; Berkowicz, R.; Brandt, J.

The report describes how the human exposure estimates based on NERI's human exposure modelling system (AirGIS) can improve the Danish data used for exposure factors in the ExternE Transport methodology. Initially, a brief description of the ExternE Tranport methodology is given and it is summarised...

Factors affecting the technical efficiency of dairy farms in Kosovo

Directory of Open Access Journals (Sweden)

Egzon BAJRAMI

2017-11-01

Full Text Available A possible accession into the World Trade Organization (WTO and an expected membership in the European Union raise significant opportunities and challenges for the agricultural sector in Kosovo. As a result of these changes, the sector will have to improve efficiency and competitiveness. This research is motivated by the need to understand better the forces that drive competitiveness in the Kosovo dairy sector. This study estimates the technical efficiency (TE of 243 dairy farms in Kosovo and relates TE variation to farm size and other primary determinants of TE. A stochastic frontier production function is estimated using a two-stage procedure. Results reveal that concentrate feed intake, land use per cow, and the number of days cows had been kept on pasture have statistically significant impacts on milk productivity per cow. The mean technical efficiency of dairy farms was estimated at 0.72. The major determinants that increase efficiency are breed improvement, intensification of corn production on the farm, improving concentrate feed intake, and using free-range production systems. Given the results from the technical efficiency analysis, it is crucial for the Government of Kosovo to redesign their dairy policy—specifically their grant investment schemes—and target assistance on improving national herd genetics, promoting free range systems and expanding area planted in corn.

Overweight, abdominal obesity and associated factors in technical administrative servants

Directory of Open Access Journals (Sweden)

Juliane Berria

2013-07-01

Full Text Available The objectives of this study were to determine the prevalence rates of excess weight and abdominal obesity among technical and administrative staff at the Universidade Federal de Santa Catarina (UFSC using a range of different anthropometric indicators and to identify sociodemographic factors associated with these rates. This was a cross-sectional study of 615 members of staff at UFSC (283 men and 332 women. The following anthropometric indicators were analyzed: body mass index (BMI, waist circumference (WC and waist to height ratio (WHtR. The following sociodemographic variables were also analyzed: age, sex, skin color, marital status, socioeconomic status, educational level and employment grade. Statistical analysis was conducted using Student’s t test, the Mann-Whitney U test and Poisson regression (with a 95% confidence interval. Prevalence rates for men and women respectively were as follows; excess weight: 63.6% and 49.7% (BMI; abdominal obesity (WC: 33.5% and 42.4%; and abdominal obesity (WHtR: 61 .8% and 40.6%. Age greater than 40 years was associated with a higher probability of excess weight and abdominal obesity in men (by BMI and WHtR and women (by BMI, WC and WHtR. Women who had spent 8 years or fewer in education had lower probabilities of excess weight (PR=0.67; 95%Cl=0.49; 0.94 and abdominal obesity, by both WC (PR=0.62; 95%Cl=0.44; 0.90 and WHtR (PR=0.49; 95%Cl=0.39; 0.64. These results indicate an elevated prevalence of excess weight and abdominal obesity and show that the factors associated with these outcomes vary by sex and depending on the anthropometric indicator analyzed.

A review on the heterogeneous thorium fuel concept for PWR applications

International Nuclear Information System (INIS)

Joo, H. K.; Noh, J. M.; Yoo, J. W.; Kim, K. H.

2001-08-01

Seed-blanket unit (SBU) and whole assembly seed and blanket (WASB) are being investigated for the PWR application as well as homogeneous thorium fuel under the US NERI program. For the verification of HELIOS capability for thorium analysis, the characteristics of heterogeneous thorium fuels was evaluated by HELIOS color-set calculation and compared with the calculation results of the US NERI. The infinite multiplication factors from HELIOS calculation are in good agreement with CASMO-4 except for SBU which uses metallic fuel for seed material. The maximum relative difference in power distribution is occurred in WASB case, and is about 5% compared to MCNP. The isotopic concentrations for Am-241, Am-243, and Cm-244 of HELIOS agree well with CASMO-4's, but show a significant discrepancy from MOCUP mainly caused by the old data of cross section and decay constants in ORIGEN. The nonproliferation characteristic of thorium-based fuel such as critical mass, spontaneous fission rate, decay heat generation rate are superior to the conventional uranium fuel. Even though the diversion of U-233 produced in blanket is a technically difficult, the enrichment of uranium isotopes including U-233 is slightly over the limit for safeguard aspects. The urnaium contents in thorium fuel is need to be adjusted in order to meet the safeguard limit. A preliminary assessment of fuel economics was performed based on the uranium utilization and SWU utilization. The natural uranium utilization factors of heterogeneous thorium-based fuel increased by 10δ18%, but the SWU utilization factor decreased by 6-δ11% compared to uranium fuel. The cost of uranium purchase of 50USI/KgU and SWU cost of 110USI/SWU-Kg, recommended by OECD/NEA, gives a comparable economics of thorium-based fuel to uraium fuel. The detailed fuel cycle analysis will take account of the other factors like the variation of uranium purchase cost and SWU cost, fabrication cost of thorium fuel, thorium purchase cost, the capcity

A review on the heterogeneous thorium fuel concept for PWR applications

Energy Technology Data Exchange (ETDEWEB)

Joo, H. K.; Noh, J. M.; Yoo, J. W.; Kim, K. H

2001-08-01

Seed-blanket unit (SBU) and whole assembly seed and blanket (WASB) are being investigated for the PWR application as well as homogeneous thorium fuel under the US NERI program. For the verification of HELIOS capability for thorium analysis, the characteristics of heterogeneous thorium fuels was evaluated by HELIOS color-set calculation and compared with the calculation results of the US NERI. The infinite multiplication factors from HELIOS calculation are in good agreement with CASMO-4 except for SBU which uses metallic fuel for seed material. The maximum relative difference in power distribution is occurred in WASB case, and is about 5% compared to MCNP. The isotopic concentrations for Am-241, Am-243, and Cm-244 of HELIOS agree well with CASMO-4's, but show a significant discrepancy from MOCUP mainly caused by the old data of cross section and decay constants in ORIGEN. The nonproliferation characteristic of thorium-based fuel such as critical mass, spontaneous fission rate, decay heat generation rate are superior to the conventional uranium fuel. Even though the diversion of U-233 produced in blanket is a technically difficult, the enrichment of uranium isotopes including U-233 is slightly over the limit for safeguard aspects. The urnaium contents in thorium fuel is need to be adjusted in order to meet the safeguard limit. A preliminary assessment of fuel economics was performed based on the uranium utilization and SWU utilization. The natural uranium utilization factors of heterogeneous thorium-based fuel increased by 10{delta}18%, but the SWU utilization factor decreased by 6-{delta}11% compared to uranium fuel. The cost of uranium purchase of 50USI/KgU and SWU cost of 110USI/SWU-Kg, recommended by OECD/NEA, gives a comparable economics of thorium-based fuel to uraium fuel. The detailed fuel cycle analysis will take account of the other factors like the variation of uranium purchase cost and SWU cost, fabrication cost of thorium fuel, thorium purchase cost

The effect of environmental factors on technical and scale efficiency of primary health care providers in Greece

Directory of Open Access Journals (Sweden)

Aletras Vassilis H

2007-11-01

Full Text Available Abstract Background The purpose of this study was to compare technical and scale efficiency of primary care centers from the two largest Greek providers, the National Health System (NHS and the Social Security Foundation (IKA and to determine if, and how, efficiency is affected by various exogenous factors such as catchment population and location. Methods The sample comprised of 194 units (103 NHS and 91 IKA. Efficiency was measured with Data Envelopment Analysis (DEA using three inputs, -medical staff, nursing/paramedical staff, administrative/other staff- and two outputs, which were the aggregated numbers of scheduled/emergency patient visits and imaging/laboratory diagnostic tests. Facilities were categorized as small, medium and large (30,000 respectively to reflect catchment population and as urban/semi-urban or remote/island to reflect location. In a second stage analysis, technical and scale efficiency scores were regressed against facility type (NHS or IKA, size and location using multivariate Tobit regression. Results Regarding technical efficiency, IKA performed better than the NHS (84.9% vs. 70.1%, Mann-Whitney P P P = 0.103. As for scale efficiency, IKA again outperformed the NHS (89.7% vs. 85.9%, Mann-Whitney P = 0.080, but results were reversed in respect to facility size and location. Specifically, larger units performed better (96.3% vs. 90.9% vs. 75.9%, Kruskal-Wallis P P Conclusion Variations appeared to exist in the productive performance of the NHS and IKA as the two main primary care providers in Greece. These variations reflect differences in primary care organization, economical incentives, financial constraints, sociodemographic and local peculiarities. In all technical efficiency comparisons, IKA facilities appeared to outperform NHS ones irrespective of facility size or location. In respect to scale efficiency, the results were to some extent inconclusive and observed differences were mostly insignificant, although

A socio-technical approach to teaching the social impacts of technological development

DEFF Research Database (Denmark)

Jensen, Per Langå; Broberg, Ole

2001-01-01

This paper describes a socio-technical approach to teach work environment in an en-gineering education as an alternative to a science-based presentation of each potential harmful factor. The socio-technical approach emphasizes that work environment must be understood in a social context and that ......This paper describes a socio-technical approach to teach work environment in an en-gineering education as an alternative to a science-based presentation of each potential harmful factor. The socio-technical approach emphasizes that work environment must be understood in a social context...

Appropriability, Technological Opportunity, Market Demand, and Technical Change - Empirical Evidence from Switzerland

OpenAIRE

Harabi, Najib

1992-01-01

The purpose of this paper is to analyze both theoretically and empirically those factors which underlay the - empirically observable - inter-industry differences in technical progress. At the theoretical level economists agree more and more that technical progress can be explained at the industry level by the following three factors: (1) the technological opportunities, (2) the appropriability conditions, meaning the ability to capture and protect the results of technical innovations and (3) ...

Proposal for outline of training and evaluation method for non-technical skills

International Nuclear Information System (INIS)

Nagasaka, Akihiko; Shibue, Hisao

2015-01-01

The purpose of this study is to systematize measures for improvement of emergency response capability focused on non-technical skills. As the results of investigation of some emergency training in nuclear power plant and referring to CRM training, following two issues were picked up. 1) Lack of practical training method for improvement of non-technical skills. 2) Lack of evaluation method of non-technical skills. Then, based on these 7 non-technical skills 'situational awareness' 'decision making' 'communication' 'teamworking' 'leadership' 'managing stress' 'coping with fatigue' are promotion factors to improve emergency response capability, we propose practical training method for each non-technical skill. Also we give example of behavioral markers as evaluation factor, and indicate approaches to introduce the evaluation method of non-technical skills. (author)

Technical Demand of Commercial Paddy Farmers in the Context of Labor Transfer

OpenAIRE

Feng, Liang-xuan; Qi, Zhen-hong; Tian, Yun; Zhou, Hui

2012-01-01

On the basis of document research, we summed up factors of technical demand of commercial paddy farmers to four aspects: individual characteristics of farmers, natural endowment of resources, factors related to risks, and information factor. Then, we put forward relevant hypotheses. From survey results of 241 farmer households in 4 southwestern provinces (regions), by the binary logistic regression analysis method, we empirically studied influences of the above four factors on technical deman...

Conflict between public perceptions and technical processes in site selection

International Nuclear Information System (INIS)

Avant, R.V. Jr.; Jacobi, L.R.

1985-01-01

U.S. Nuclear Regulatory Commission regulations and guidance on site selection are based on sound technical reasoning. Geology, hydrology, flora and fauna, transportation, demographics, and sociopolitical concerns, to name a few, have been factored into the process. Regardless of the technical objectivity of a site selection process, local opposition groups will challenge technical decisions using technical, nontechnical, and emotional arguments. This paper explores the many conflicts between public perceptions, technical requirements designed to protect the general public, and common arguments against site selection. Ways to deal with opposition are also discussed with emphasis placed on developing effective community relations

Technical Efficiency of Wet Season Melon Farming

Directory of Open Access Journals (Sweden)

Ananti Yekti

2017-03-01

Full Text Available Melon is one of high-value horticulture commodity which is cultivated widely in Kulon Progo regency. The nature of agricultural products is heavily dependent on the season, so it causes the prices of agricultural products always fluctuated every time. In wet season the price of agricultural products tends to be more expensive. Melon cultivation in wet season provide an opportunity to earn higher profits than in the dry season. The price of agricultural products tends to be more expensive in wet season, thus melon cultivation in wet season prospectively generate high profits. In order to achieve high profitability, melon farming has to be done efficiently. Objective of this study was to 1 determined the factors that influence melon production in wet season 2 measured technical efficiency of melon farming and 3 identified the factors that influanced technical efficiency. Data collected during April – June 2014. Location determined by multistage cluster sampling. 45 samples of farmers who cultivated melon during wet season obtained based on quota sampling technique. Technical efficiency was measured using Cobb-Douglas Stochastic Frontier. The result reveals that 1 land use, quantity of seed, K fertilizer contributed significantly increasing melon production, while N fertilizer decreased melon production significantly 2 technical efficiency indeces ranged from 0.40 to 0.99, with a mean of  0.77; 3 farmer’s experience gave significant influence to technical efficiency of melon farming in wet season.

Technical efficiency in milk production in underdeveloped production environment of India*.

Science.gov (United States)

Bardhan, Dwaipayan; Sharma, Murari Lal

2013-12-01

The study was undertaken in Kumaon division of Uttarakhand state of India with the objective of estimating technical efficiency in milk production across different herd-size category households and factors influencing it. Total of 60 farm households having representation from different herd-size categories drawn from six randomly selected villages of plain and hilly regions of the division constituted the ultimate sampling units of the study. Stochastic frontier production function analysis was used to estimate the technical efficiency in milk production. Multivariate regression equations were fitted taking technical efficiency index as the regressand to identify the factors significantly influencing technical efficiency in milk production. The study revealed that variation in output across farms in the study area was due to difference in their technical efficiency levels. However, it was interesting to note that smallholder producers were more technically efficient in milk production than their larger counterparts, especially in the plains. Apart from herd size, intensity of market participation had significant and positive impact on technical efficiency in the plains. This provides definite indication that increasing the level of commercialization of dairy farms would have beneficial impact on their production efficiency.

A longitudinal study on risk factors for neck and shoulder pain among young adults in the transition from technical school to working life

NARCIS (Netherlands)

Hanvold, T.N.; Warsted, M.; Mengshoel, A.M.; Bjertness, E.; Twisk, J.W.R.; Veiersted, K.B.

2014-01-01

Objectives The study examined the course of neck and shoulder pain among a cohort of technical school students entering working life. We also aimed to identify work-related and individual risk factors for neck and shoulder pain during this transition period. Methods The study was designed as a

[Factors forming opnion on marijuana legalization in Poland among group of students from medical and technical college faculty].

Science.gov (United States)

Suwała, Małgorzata; Gerstenkorn, Andrzej; Szewczyk, Anna

2015-01-01

Marijuana is the most popular illegal drug in the world. In 2010 17.6% of polish adult population (age 15-64) and 37.3% of youth (age 17-18) declared use of marijuana at least once in their lifetime. Recent years in Poland brought back public discussion regarding decriminalization and legalization of marijuana. The main goal of the study was to reveal the opinion about legalization of marijuana in Poland among students of medical and technical faculty in correlation with chosen socio-demographic factors, college major, attitude to tobacco smoking, use of drugs and religious practice. Study included 230 students (110 from Medical University of Lodz and 120 from Technical University of Lodz). Women consisted on 56.1% of surveyed and men on 43.9%. Study used audit survey as a research method. Results. 40.4% of students considered marijuana as "soft" drug and in majority (65.7%) are convinced that it is not addictive. The main part of studied group (83%) claimed that marijuana is easily accessible in Poland. The majority of the group (38.75%) was against marijuana legalization, a little bit less (35.2%) approved its legalization in Poland and 26.1% had no opinion. Type of college faculty had not been detected as a factor influencing support for legalization. Important factors influencing positive opinion on legalization was: living in the city, tobacco smoking, socializing with legalization supporters, lack of regular religious practice, drug use. CONCLUSION. Young people's diversified opinion regarding legalization of marijuana in Poland should encourage further discussion. Educational and preventive activities within different social groups are necessary to form a conscious opinion on legalization of marijuana in Poland based on the knowledge of actual scientific facts.

Human factoring administrative procedures

International Nuclear Information System (INIS)

Grider, D.A.; Sturdivant, M.H.

1991-01-01

In nonnuclear business, administrative procedures bring to mind such mundane topics as filing correspondence and scheduling vacation time. In the nuclear industry, on the other hand, administrative procedures play a vital role in assuring the safe operation of a facility. For some time now, industry focus has been on improving technical procedures. Significant efforts are under way to produce technical procedure requires that a validated technical, regulatory, and administrative basis be developed and that the technical process be established for each procedure. Producing usable technical procedures requires that procedure presentation be engineered to the same human factors principles used in control room design. The vital safety role of administrative procedures requires that they be just as sound, just a rigorously formulated, and documented as technical procedures. Procedure programs at the Tennessee Valley Authority and at Boston Edison's Pilgrim Station demonstrate that human factors engineering techniques can be applied effectively to technical procedures. With a few modifications, those same techniques can be used to produce more effective administrative procedures. Efforts are under way at the US Department of Energy Nuclear Weapons Complex and at some utilities (Boston Edison, for instance) to apply human factors engineering to administrative procedures: The techniques being adapted include the following

Prevalence and risk factors associated with Sarcocystis neurona infections in opossums (Didelphis virginiana) from central California.

Science.gov (United States)

Rejmanek, Daniel; Vanwormer, Elizabeth; Miller, Melissa A; Mazet, Jonna A K; Nichelason, Amy E; Melli, Ann C; Packham, Andrea E; Jessup, David A; Conrad, Patricia A

2009-12-03

Sarcocystis neurona, a protozoal parasite shed by opossums (Didelphis virginiana), has been shown to cause significant morbidity and mortality in horses, sea otters, and other marine mammals. Over the course of 3 years (fall 2005-summer 2008), opossums from central California were tested for infection with S. neurona. Of 288 opossums sampled, 17 (5.9%) were infected with S. neurona based on the molecular characterization of sporocysts from intestinal scrapings or feces. Risk factors evaluated for association with S. neurona infection in opossums included: age, sex, location, season, presence of pouch young in females, concomitant infection, and sampling method (live-trapped or traffic-killed). Multivariate logistic regression analysis identified that opossums in the Central Valley were 9 times more likely to be infected than those near the coast (p=0.009). Similarly, opossum infection was 5 times more likely to be detected during the reproductive season (March-July; p=0.013). This first investigation of S. neurona infection prevalence and associated risk factors in opossums in the western United States can be used to develop management strategies aimed at reducing the incidence of S. neurona infections in susceptible hosts, including horses and threatened California sea otters (Enhydra lutris neries).

Non-technical skills in histopathology: definition and discussion.

Science.gov (United States)

Johnston, Peter W; Fioratou, Evie; Flin, Rhona

2011-09-01

Health care is a high-risk industry, with most documented adverse incidents being associated with 'human factors' including cognitive and social skills termed 'non-technical skills'. Non-technical skills complement the diagnostic and specialist skills and professional attributes required by medical practitioners, including histopathologists, and can enhance the quality of practice and delivery of health-care services and thus contribute to patient safety. This review aims to introduce histopathologists to non-technical skills and how these pertain to everyday histopathological practice. Drawing from other domains in medicine, specifically anaesthesia and surgery, a variety of non-technical skills are identified and described in the context of histopathology to illustrate the role each plays, often collectively, in daily practice. The generic non-technical skills are defined as situation awareness, decision-making, communication, teamwork, leadership, managing stress and coping with fatigue. Example scenarios from histopathology are presented and the contributions to outcomes made by non-technical skills are explained. Consideration of these specific non-technical skills as a component in histopathology training may benefit practitioners as well as assuring patient safety. © 2011 Blackwell Publishing Limited.

Non-technical skills training to enhance patient safety.

Science.gov (United States)

Gordon, Morris

2013-06-01

  Patient safety is an increasingly recognised issue in health care. Systems-based and organisational methods of quality improvement, as well as education focusing on key clinical areas, are common, but there are few reports of educational interventions that focus on non-technical skills to address human factor sources of error. A flexible model for non-technical skills training for health care professionals has been designed based on the best available evidence, and with sound theoretical foundations.   Educational sessions to improve non-technical skills in health care have been described before. The descriptions lack the details to allow educators to replicate and innovate further.   A non-technical skills training course that can be delivered as either a half- or full-day intervention has been designed and delivered to a number of mixed groups of undergraduate medical students and doctors in postgraduate training. Participant satisfaction has been high and patient safety attitudes have improved post-intervention.   This non-technical skills educational intervention has been built on a sound evidence base, and is described so as to facilitate replication and dissemination. With the key themes laid out, clinical educators will be able to build interventions focused on numerous clinical issues that pay attention to human factor contributors to safety. © 2013 John Wiley & Sons Ltd.

Technical preparation of the Yuzhteploehnergomontazh trust for technological equipment mounting

International Nuclear Information System (INIS)

Zayats, A.I.

1982-01-01

Measures of technical preparation for equipment mounting at the Zaporozhe NPP developed with the Yuzhteploehnergomontazh trust experts are considered. These measures envisage the construction of mounting base of heat facilities, calculation of labour contents and determination of necessary quantity of mounters, development of optimal flowsheet of mounting control, improvement of mounting qualification and creation of stable collective body, improvement of technical level of mounting and welding works, organizational-technical measures on mounting logistics. Factors affecting negatively technical preparation quality of equipment mounting at the Zaporozhe NPP are discussed. The flowsheet of mounting control is presented

Identifying Architectural Technical Debt in Android Applications through Compliance Checking

NARCIS (Netherlands)

Verdecchia, R.

By considering the fast pace at which mobile applications need to evolve, Architectural Technical Debt results to be a crucial yet implicit factor of success. In this research we present an approach to automatically identify Architectural Technical Debt in Android applications. The approach takes

Assessment of the technical viability of reactor options for plutonium disposition

International Nuclear Information System (INIS)

Primm, R.T. III.

1996-01-01

Various reactor concepts for the disposition of surplus Pu have been proposed by reactor vendors; not all have attained the same level of technical viability. Studies were performed to differentiate between reactor concepts by devising a quantitative index for technical viability. For a quantitative assessment, three issues required resolution: the definition of a technical maturity scale, the treatment of ''subjective'' factors which cannot be easily represented in a quantitative format, and the protocol for producing a single technical viability figure-of-merit for each alternative. Alternatives involving the use of foreign facilities were found to be the most technically viable

Effects of Human Factors in Engineering and Design for Teaching Mathematics: A Comparison Study of Online and Face-to-Face at a Technical College

Science.gov (United States)

Mativo, John M.; Hill, Roger B.; Godfrey, Paul W.

2013-01-01

The focus of this study was to examine four characteristics for successful and unsuccessful students enrolled in basic mathematics courses at a technical college. The characteristics, considered to be in part effects of human factors in engineering and design, examined the preferred learning styles, computer information systems competency,…

Impact of Medicare Advantage penetration and hospital competition on technical efficiency of nursing care in US intensive care units.

Science.gov (United States)

Min, Ari; Scott, Linda D; Park, Chang; Vincent, Catherine; Ryan, Catherine J; Lee, Taewha

2018-04-10

This study aimed to evaluate technical efficiency of US intensive care units and determine the effects of environmental factors on technical efficiency in providing quality of nursing care. Data were obtained from the 2014 National Database of Nursing Quality Indicators and the Centers for Medicare and Medicaid Services. Data envelopment analysis was used to estimate technical efficiency for each intensive care unit. Multilevel modeling was used to determine the effects of environmental factors on technical efficiency. Overall, Medicare Advantage penetration and hospital competition in a market did not create pressure for intensive care units to become more efficient by reducing their inputs. However, these 2 environmental factors showed positive influences on technical efficiency in intensive care units with certain levels of technical efficiency. The implications of the study results for management strategies and health policy may vary according to the levels of technical efficiency in intensive care units. Further studies are needed to examine why and how intensive care units with particular levels of technical efficiency are differently affected by certain environmental factors. Copyright © 2018 John Wiley & Sons, Ltd.

Knowledge uptake by technical professionals and decision-makers ...

African Journals Online (AJOL)

While significant knowledge appears to be available on developmental water services (a term for service provision, to meet developmental objectives, with an emphasis on poor communities, in which a range of factors other than purely technical factors are addressed), there appears to be insufficient uptake of this ...

Technical efficiency of potato and dairy farming in mountainous Kazbegi district, Georgia

Directory of Open Access Journals (Sweden)

R. Shavgulidze

2017-03-01

Full Text Available The study employs a stochastic frontier analysis to assess technical efficiency of potato and cheese production and determine socio-economic factors that influence farmers' technical efficiency levels in mountainous Kazbegi district of Georgia. The study found improved feeding to be inversely related with technical inefficiency in cheese production. In potato production, the analysis revealed implementation of the plant protection measures and use of quality seeds to be significant aspects that influence technical efficiency of potato growers.

INDOT Technical Training Plan : [Technical Summary

Science.gov (United States)

2012-01-01

A wide range of job classifications, increasing technical : performance expectations, licensing and certification requirements, : budget restrictions and frequent department : reorganization has made technical training of employees : more difficult, ...

Technical efficiency of FDI firms in the Vietnamese manufacturing sector

Directory of Open Access Journals (Sweden)

Vu Hoang Duong

2016-09-01

Full Text Available The study examines technical efficiency of Foreign Direct Investment (FDI firms in the Vietnamese manufacturing sector by applying stochastic production frontier model and making use of cross-sectional data in the period 2009-2013. The average level of technical efficiency of FDI firms is about 60% and it is higher than that of domestic firms (including private firms and state-owned firms. In addition, the study also analyses correlation between technical efficiency of FDI firms and other factors. It finds that there are positive correlations between FDI technical efficiency and net revenue per labour, firm’s age or export activities in 2013. However, the study is unable to find evidence of a relationship between FDI technical efficiency and infrastructure or firm’s investment activities.

Quality Assurance in Higher Technical Education and the Context of Youth Empowerment for Sustainable Development

Directory of Open Access Journals (Sweden)

Olufunmilayo T. Iyunade, Ph.D

2014-06-01

Full Text Available Recent empirical evidences on higher technical education at a national scale focused on the relevance, student’s poor perception, low enrolment and progression rates, and the growing impact of globalization on the management of higher technical and vocational education with little or no reference point to the factor of quality assurance. This paper therefore correlates quality assurance factors in higher technical education and the context of youth empowerment for sustainable development. A survey of public technical colleges was done in Ogun State. From an estimate population of 637 final year students and 28 instructors and management staff, a simple of 376 students and 17 instructors and management staff were selected using the stratify random sampling technique. A 4-point rating scale validated questionnaires tagged: ‘Higher Technical Education, Youth Empowerment and Sustainable Development Scale (HTEYESDS (r=0.79, complemented with focus Group Discussion (FGD was used for data collection. Three research questions were raised and answered. Data were analysed using descriptive and inferential statistics of Pearson correlation, multiple regression and analysis of variance at 0.05 apha level. Results showed that poor quality assurance limits the capacity of higher technical education in the empowerment of youth for sustainable development (82.6%. Quality assurance factors significantly correlated with higher technical education in the empowerment of youth for sustainable development (r=0.188; P < 0.05. It was therefore recommended that government should neither neglect nor compromise the factors of quality assurance in higher technical education as they predicts youth empowerment drive in the system.

Technical, institutional and economic factors important for developing a multinational radioactive waste repository

International Nuclear Information System (INIS)

1998-06-01

Countries planning and implementing nuclear energy programmes should assume responsibility for the safe management and final disposal of radioactive waste from their programmes. However, there are countries whose radioactive waste volumes do not easily justify a national repository, and/or countries which do not have the resources or favorable natural conditions for waste disposal to dedicate to a national repository project. These countries would benefit from multinational co-operation for the disposal. Interest in the concept of a multinational repository for radioactive waste has been expressed by several Member States and the waste management community in the light of the potential benefit to the partner countries from the safety, technical and economic standpoints. However, such an approach involves many political and public acceptance issues and therefore a consensus among countries or regions concerned is a prerequisite. In this context, it was deemed appropriate that the IAEA access the technical, institutional, ethical and economic factors to be taken into account in the process of such consensus building. This report is intended to provide an assessment which can serve as a general basis for establishing a waste management policy and/or further assessing specific issues such as ownership and liability, institutional aspects and problems related to long term commitments. This report is divided into five sections where the first section gives background, objectives, scope and structure of the report. Section 2 discusses multinational repository concept in terms of needs and the role of a multinational repository, interaction between host and partner countries and formulation of a multinational repository. Section 3 identifies basic issues to be considered for establishing a multinational repository, and some specific issues relating to specific waste categories. Section 4 analyses potential benefits and challenges to be addresses in establishing a

The Environmental Data Exchange Network for Inland Water (EDEN-IW) Project

DEFF Research Database (Denmark)

Stjernholm, M.; Prunayre, F-X.; Wuertz, J.

The report document the concepts found in water quality databases at NERI and IOW. The diffent understanding of concepts with same names is analysed and a model for structuring the knowledge is proposed.......The report document the concepts found in water quality databases at NERI and IOW. The diffent understanding of concepts with same names is analysed and a model for structuring the knowledge is proposed....

Multidirectional analysis of technical efficiency for pig production systems

DEFF Research Database (Denmark)

Labajavo, Katarina; Hansson, Helena; Asmild, Mette

2016-01-01

Declining profitability and ongoing structural changes in the pig sector require thorough efficiency analysis of individual production factors. In this study we calculated technical efficiency indices for each input and output using multidirectional efficiency analysis and examined the relationship...... between ‘farm-specific characteristics’ and input and output technical efficiencies by production type (piglet, growing-finishing, finish-to-farrow). The results indicated that advisory services and farm location were not significantly correlated with technical efficiency. Similar results were obtained...... for ‘housing practices’, with the exception of the latest technology such as heated floors in relation to input labour technical efficiency for growing-finishing and finish-to-farrow productions. Use of written instructions for feeding for growing-finishing and finish-to-farrow production and written...

Work ability and associated factors of Brazilian technical-administrative workers in education.

Science.gov (United States)

Godinho, Marluce Rodrigues; Greco, Rosangela Maria; Teixeira, Maria Teresa Bustamante; Teixeira, Liliane Reis; Guerra, Maximiliano Ribeiro; Chaoubah, Alfredo

2016-01-02

Studies about work ability have grown in importance owing to the worldwide aging of active populations. Research has shown that measuring work ability has a predictive value in cases of long-term sickness absence and early retirement. Our goal was to analyze the work ability and associated factors of civil servants from a higher education institution in Brazil. The participants in this cross-sectional study were 600 technical-administrative workers at a public university. Work ability was measured using the work ability index. The participants were as follows: 51.8% male; mean age of 45 years (SD = ±11); married or in a stable union (61.5%); holding a graduate degree (56.7%); having only one job (83.3%), working 40 h a week or less (78.6%); not working evenings (79.8%); and having direct contact with the public (58.3%). The prevalence of reduced work ability was 13.9%. The following factors were found to be associated with reduced work ability: age 50 years old or above (PR = 2.58; 95% CI 1.25-5.09); female (PR = 2.77; 95% CI 1.25-3.60); education up to secondary school (PR = 2.37; 95% CI 1.13-3.59); overall poor self-assessed health (PR = 2.96; 95% CI 1.32-3.93); signs and symptoms of depression (PR = 4.86; 95% CI 2.23-6.55); sedentariness (PR = 3.00; 95% CI 1.38-4.68) and poor social support at work (PR = 4.01; 95% CI 1.66-4.37). Most of the participants showed good work ability, but some subjects had reduced work ability. This study makes a contribution to expanding the discussion about the factors associated with work ability toward proposing actions for maintaining that ability or helping recovery in the case of diminished ability. Such actions can help reduce work absenteeism and early retirement, both of which have a social and economic impact in Brazil. Studying the determinants of work ability and recommendations to address those determinants will help efforts to improve the quality of life of individuals, both at work and personally, and promote healthy

Development and evaluation of a patient-centred measurement tool for surgeons' non-technical skills.

Science.gov (United States)

Yule, J; Hill, K; Yule, S

2018-06-01

Non-technical skills are essential for safe and effective surgery. Several tools to assess surgeons' non-technical skills from the clinician's perspective have been developed. However, a reliable measurement tool using a patient-centred approach does not currently exist. The aim of this study was to translate the existing Non-Technical Skills for Surgeons (NOTSS) tool into a patient-centred evaluation tool. Data were gathered from four cohorts of patients using an iterative four-stage mixed-methods research design. Exploratory and confirmatory factor analyses were performed to establish the psychometric properties of the tool, focusing on validity, reliability, usability and parsimony. Some 534 patients were recruited to the study. A total of 24 patient-centred non-technical skill items were developed in stage 1, and reduced to nine items in stage 2 using exploratory factor analysis. In stage 3, confirmatory factor analysis demonstrated that these nine items each loaded on to one of three factors, with excellent internal consistency: decision-making, leadership, and communication and teamwork. In stage 4, validity testing established that the new tool was independent of physician empathy and predictive of surgical quality. Surgical leadership emerged as the most dominant skill that patients could recognize and evaluate. A novel nine-item assessment tool has been developed. The Patients' Evaluation of Non-Technical Skills (PENTS) tool allows valid and reliable measurement of surgeons' non-technical skills from the patient perspective. © 2018 BJS Society Ltd Published by John Wiley & Sons Ltd.

Study on team evaluation (6). Relationships among technical skill proficiency, leadership, and teamwork behaviors

International Nuclear Information System (INIS)

Misawa, Ryo; Sasou, Kunihide

2011-01-01

To maintain and improve the efficiency and safety of operations in numerous industries, it is necessary to develop programs that enhance teamwork. This can be achieved through empirical investigations that identify influential factors contributing to teamwork. This study focused on technical skill proficiency and leadership as influential factors and examined the relationships among these factors and teamwork behaviors. A series of measurements was performed on 54 operations teams with the cooperation of the training center of thermal power plants. Teamwork behaviors in training under simulated abnormal conditions were evaluated through instructors' observation using a behavior checklist. Technical skill proficiency was measured by conducting a brief survey on instructors. Leadership was measured on the basis of followers' responses on questionnaire scales. Based on the scores of technical skill proficiency and leadership, hierarchical cluster analysis revealed three types of teams: (a) F-type - the technical skills of followers are superior to those of leaders; (b) LF-type - both leaders and followers are proficient in technical skills; and (c) L-type - the technical skills of leaders are superior to those of followers. ANOVAs were conducted to examine differences in teamwork behavior for the three types of teams. The main results revealed that LF-type teams actively engaged in information gathering and that leaders played a central role in these activities. In addition, the followers of F-type teams freely exchanged their ideas and opinions regarding problems and actively discussed how to solve them. These findings suggest that teamwork behaviors can vary depending on technical skill proficiency and leadership in teams. Future research is needed to identify additional factors affecting teamwork that are not measured in this study. (author)

Modelling risk in high hazard operations : Integrating technical, organisational and cultural factors

NARCIS (Netherlands)

Ale, B.J.M.; Hanea, D.M.; Sillem, S.; Lin, P.H.; Van Gulijk, C.; Hudson, P.T.W.

2012-01-01

Recent disasters in high hazard industries such as Oil and Gas Exploration (The Deepwater Horizon) and Petrochemical production (Texas City) have been found to have causes that range from direct technical failures through organizational shortcomings right up to weak regulation and inappropriate

Human and technical factors in the doses reduction and optimization at Cogema/Marcoule; Facteurs techniques et humains dans la reduction et l'optimisation des doses a Cogema/Marcoule

Energy Technology Data Exchange (ETDEWEB)

Bourgogne, J.L. [Cogema, 30 - Marcoule (France)

1998-07-01

In the case of Cogema/Marcoule, the constant decrease of radiation doses is attributed to three factors: technical with a surveillance system and doses optimization, relational with the promotion of confidence in teams of radiation protection services as an acceptation factor of radiation protection techniques and psychological with an evolution of minds towards the ALARA approach. (N.C.)

Technical Efficiency of Potato and Dairy Farming in Mountainous Kazbegi District, Georgia

OpenAIRE

Shavgulidze, R.; Bedoshvili, D.; Aurbacher, J.

2017-01-01

The study employs a stochastic frontier analysis to assess technical efficiency of potato and cheese production and determine socio-economic factors that influence farmers' technical efficiency levels in mountainous Kazbegi district of Georgia. The study found improved feeding to be inversely related with technical inefficiency in cheese production. In potato production, the analysis revealed implementation of the plant protection measures and use of quality seeds to be significant aspects th...

Predictors of employer satisfaction: technical and non-technical skills.

Science.gov (United States)

Danielson, Jared A; Wu, Tsui-Feng; Fales-Williams, Amanda J; Kirk, Ryan A; Preast, Vanessa A

2012-01-01

Employers of 2007-2009 graduates from Iowa State University College of Veterinary Medicine were asked to respond to a survey regarding their overall satisfaction with their new employees as well as their new employees' preparation in several technical and non-technical skill areas. Seventy-five responses contained complete data and were used in the analysis. Four technical skill areas (data collection, data interpretation, planning, and taking action) and five non-technical skill areas (interpersonal skills, ability to deal with legal issues, business skills, making referrals, and problem solving) were identified. All of the skill area subscales listed above had appropriate reliability (Cronbach's alpha>0.70) and were positively and significantly correlated with overall employer satisfaction. Results of two simultaneous regression analyses indicated that of the four technical skill areas, taking action is the most salient predictor of employer satisfaction. Of the five non-technical skill areas, interpersonal skills, business skills, making referrals, and problem solving were the most important skills in predicting employer satisfaction. Hierarchical regression analysis revealed that all technical skills explained 25% of the variation in employer satisfaction; non-technical skills explained an additional 42% of the variation in employer satisfaction.

Technical standards in the law of technical safety

International Nuclear Information System (INIS)

Marburger, P.

1985-01-01

Technical standards are of great importance for the closer definition of inexact terms of law, for instance ''generally accepted technical rules'', ''state of the art'', ''state of science and technology'' or similar normative terms, in the law of technical safety. The paper discusses with whom the authority for regulating this sector of law rests, deals with the different ways of how technical standards are used by the law (''anticipated expert opinion'', reference to such standards in law and administration) and points out demands on the procedure of standardization. (orig.) [de

Implantation of Right Kidneys: Is the Risk of Technical Graft Loss Real?

Science.gov (United States)

Khan, Taqi T; Ahmad, Nadeem; Siddique, Kashif; Fourtounas, Konstantinos

2018-05-01

The left kidney (LK) is preferred by transplant surgeons, because its vein is always of good length and has a thick wall that enables safe suturing. On the other hand, the right renal vein is generally shorter and thinner walled, and well known for its technical difficulty during venous anastomosis, and can result in graft loss. We examined our living (LD) and deceased donor (DD) recipient data and compared the incidence of technical graft loss and early graft function in right and left kidneys. A cohort of 58 adult and pediatric recipients received an LD or DD kidney between January 2015 and December 2016. The donor and recipient data were retrieved and retrospectively analyzed. Technical graft loss was defined as graft thrombosis within the 7 days after transplant. Right kidneys (RKs) were not a risk factor for technical graft loss, and no graft was lost for technical reasons in either LD or DD transplants. Early graft function in LK and RKs was also comparable in the LD cohort, and there were no LKs in the DD cohort. Based on our data, the use of RKs was not a risk factor for technical graft loss and early graft function was comparable to LKs.

Technical Efficiency of Thai Manufacturing SMEs: A Stochastic Frontier Analysis

Directory of Open Access Journals (Sweden)

Teerawat Charoenrat

2013-03-01

Full Text Available AbstractA major motivation of this study is to examine the factors that are the most important in contributing to the relatively poor efficiency performance of Thai manufacturing small and medium sized enterprises (SMEs. The results obtained will be significant in devising effective policies aimed at tackling this poor performance.This paper uses data on manufacturing SMEs in the North-eastern region of Thailand in 2007 as a case study, by applying a stochastic frontier analysis (SFA and a technical inefficiency effects model. The empirical results obtained indicate that the mean technical efficiency of all categories of manufacturing SMEs in theNorth-eastern region is 43%, implying that manufacturing SMEs have high levels of technical inefficiency in their production processes.Manufacturing SMEs in the North-eastern region are particularly labour-intensive. The empirical results of the technical inefficiency effects model suggest that skilled labour, the municipal area and ownership characteristics are important firm-specific factors affecting technical efficiency. The paper argues that the government should play a more substantial role in developing manufacturing SMEs in the North-eastern provinces through: providing training programs for employees and employers; encouraging a greater usage of capital and technology in the production process of SMEs; enhancing the efficiency of state-ownedenterprises; encouraging a wide range of ownership forms; and improving information and communications infrastructure.

Physiology knowledge plays a role when novices learn technical echocardiography skills

DEFF Research Database (Denmark)

Nielsen, Dorte Guldbrand; Gøtzsche, Ole; Eika, Berit

2010-01-01

Purpose: Little is known about factors of relevance for achieving technical skills of echocardiography (TTE); one of the essential skills defined by the European Society of Cardiology Core Curriculum. In an earlier study we have shown that there is a strong correlation between physiology knowledge...... and interpretation skills of intermediately trained echocardiographers. This study investigates the role of physiology knowledge in the development of echocardiographic technical expertise. Methods: Forty-five physicians (15 novices, 15 intermediates and 15 experts) were evaluated on technical skills. Participants...... of echocardiography relevant physiology knowledge. Results: A strong and significant correlation between expertise level and technical checklist scores was found (r = .76, p

technical note: technical note: on the correctness of load loss factor ...

African Journals Online (AJOL)

eobe

Load Loss Factor (LLF) is a function of the estimate of the losses between the grid supply point and the consumers. estimate ... i.e. the ratio of average demand to peak demand, and using this ratio to determine an approximation to the. LLF via ...

76 FR 64083 - Reliability Technical Conference; Notice of Technical Conference

Science.gov (United States)

2011-10-17

... Technical Conference; Notice of Technical Conference Take notice that the Federal Energy Regulatory Commission will hold a Technical Conference on Tuesday, November 29, 2011, from 1 p.m. to 5 p.m. and... reliability that were identified in earlier Commission technical conferences. The conference also will discuss...

Teaching Technical Writing - Towards Technical Writing

DEFF Research Database (Denmark)

Kastberg, Peter

2000-01-01

In this paper I will present key aspects of the curriculum for the university degree in technical translation that I have designed for and subsequently implemented at the German Department of the Aarhus School of Business, Denmark. My starting point will be a critical discussion of the norm that ...... of technical writing.......In this paper I will present key aspects of the curriculum for the university degree in technical translation that I have designed for and subsequently implemented at the German Department of the Aarhus School of Business, Denmark. My starting point will be a critical discussion of the norm...... that used to govern what the quality of an LSP text should be as opposed to the standpoint, which I advocate. By way of summing up, I will show how a university curriculum is designed so that - upon graduation - the technical translator could also be methodological quite well suited to take on the challenge...

Correlations between technical skills and behavioral skills in simulated neonatal resuscitations.

Science.gov (United States)

Sawyer, T; Leonard, D; Sierocka-Castaneda, A; Chan, D; Thompson, M

2014-10-01

Neonatal resuscitation requires both technical and behavioral skills. Key behavioral skills in neonatal resuscitation have been identified by the Neonatal Resuscitation Program. Correlations and interactions between technical skills and behavioral skills in neonatal resuscitation were investigated. Behavioral skills were evaluated via blinded video review of 45 simulated neonatal resuscitations using a validated assessment tool. These were statistically correlated with previously obtained technical skill performance data. Technical skills and behavioral skills were strongly correlated (ρ=0.48; P=0.001). The strongest correlations were seen in distribution of workload (ρ=0.60; P=0.01), utilization of information (ρ=0.55; P=0.03) and utilization of resources (ρ=0.61; P=0.01). Teams with superior behavioral skills also demonstrated superior technical skills, and vice versa. Technical and behavioral skills were highly correlated during simulated neonatal resuscitations. Individual behavioral skill correlations are likely dependent on both intrinsic and extrinsic factors.

Quality Concerns in Technical Education in India: A Quantifiable Quality Enabled Model

Science.gov (United States)

Gambhir, Victor; Wadhwa, N. C.; Grover, Sandeep

2016-01-01

Purpose: The paper aims to discuss current Technical Education scenarios in India. It proposes modelling the factors affecting quality in a technical institute and then applying a suitable technique for assessment, comparison and ranking. Design/methodology/approach: The paper chose graph theoretic approach for quantification of quality-enabled…

Paresthesia-Independence: An Assessment of Technical Factors Related to 10 kHz Paresthesia-Free Spinal Cord Stimulation.

Science.gov (United States)

De Carolis, Giuliano; Paroli, Mery; Tollapi, Lara; Doust, Matthew W; Burgher, Abram H; Yu, Cong; Yang, Thomas; Morgan, Donna M; Amirdelfan, Kasra; Kapural, Leonardo; Sitzman, B Todd; Bundschu, Richard; Vallejo, Ricardo; Benyamin, Ramsin M; Yearwood, Thomas L; Gliner, Bradford E; Powell, Ashley A; Bradley, Kerry

2017-05-01

Spinal cord stimulation (SCS) has been successfully used to treat chronic intractable pain for over 40 years. Successful clinical application of SCS is presumed to be generally dependent on maximizing paresthesia-pain overlap; critical to achieving this is positioning of the stimulation field at the physiologic midline. Recently, the necessity of paresthesia for achieving effective relief in SCS has been challenged by the introduction of 10 kHz paresthesia-free stimulation. In a large, prospective, randomized controlled pivotal trial, HF10 therapy was demonstrated to be statistically and clinically superior to paresthesia-based SCS in the treatment of severe chronic low back and leg pain. HF10 therapy, unlike traditional paresthesia-based SCS, requires no paresthesia to be experienced by the patient, nor does it require paresthesia mapping at any point during lead implant or post-operative programming. To determine if pain relief was related to technical factors of paresthesia, we measured and analyzed the paresthesia responses of patients successfully using HF10 therapy. Prospective, multicenter, non-randomized, non-controlled interventional study. Outpatient pain clinic at 10 centers across the US and Italy. Patients with both back and leg pain already implanted with an HF10 therapy device for up to 24 months were included in this multicenter study. Patients provided pain scores prior to and after using HF10 therapy. Each patient's most efficacious HF10 therapy stimulation program was temporarily modified to a low frequency (LF; 60 Hz), wide pulse width (~470 mus), paresthesia-generating program. On a human body diagram, patients drew the locations of their chronic intractable pain and, with the modified program activated, all regions where they experienced LF paresthesia. Paresthesia and pain drawings were then analyzed to estimate the correlation of pain relief outcomes to overlap of pain by paresthesia, and the mediolateral distribution of paresthesia (as a

Non-technical factors impacting on the decision making processes in environmental remediation. Influences on the decision making process such as cost, planned land use and public perception

International Nuclear Information System (INIS)

2002-04-01

The IAEA attaches great importance to the dissemination of information that can assist Member States with the development, implementation, maintenance and continuous improvement of systems, programmes and activities that support the nuclear fuel cycle and nuclear applications, including the legacy of past practices and accidents. In response to this, the IAEA has initiated a comprehensive programme of work covering all aspects of environmental remediation: factors important for formulating a strategy for environmental remediation; site characterisation techniques and strategies; assessment of remediation technologies; assessment of technical options for cleanup of contaminated media; post-restoration compliance monitoring; assessment of the costs of remediation measures; remediation of low-level disperse radioactive contaminations in the environment. While this project mainly focus on technological aspects, non-technical factors will be influencing the decision making process in remediation decisively. Often their influence is only tacitly accepted and not explicitly acknowledged by the responsible decision makers. This makes it difficult to trace the decision making process in the event that it has to be revisited. The present publication attempts to make these factors explicit and to present methods to include them consciously into the decision making process

78 FR 27963 - Reliability Technical Conference; Notice of Technical Conference

Science.gov (United States)

2013-05-13

... Technical Conference; Notice of Technical Conference Take notice that the Federal Energy Regulatory Commission will hold a Technical Conference on Tuesday, July 9, 2013 from 9:00 a.m. to 5:00 p.m. This... technical support for webcasts and offers the option of listening to the meeting via phone-bridge for a fee...

Regional dimensions of international scientific and technical cooperation

Directory of Open Access Journals (Sweden)

Tetiana Chernytska

2013-02-01

Full Text Available The article has examined a phenomenon of international scientific and technical cooperation within individual regions, conditions and factors of its formation. It has been analyzed the evolution, basic essential features, models and trends of development of local innovation alliances, their participation in international scientific and technical cooperation. It has been proposed the priorities of formation of a quality mechanism to improve this form of cooperation in Ukraine and establishment of prerequisites for its expansion with European organizational structures that operate in innovation field (technology parks, technology clusters, innovation centers, etc..

Incorporating organizational factors into Probabilistic Risk Assessment (PRA) of complex socio-technical systems: A hybrid technique formalization

International Nuclear Information System (INIS)

Mohaghegh, Zahra; Kazemi, Reza; Mosleh, Ali

2009-01-01

This paper is a result of a research with the primary purpose of extending Probabilistic Risk Assessment (PRA) modeling frameworks to include the effects of organizational factors as the deeper, more fundamental causes of accidents and incidents. There have been significant improvements in the sophistication of quantitative methods of safety and risk assessment, but the progress on techniques most suitable for organizational safety risk frameworks has been limited. The focus of this paper is on the choice of 'representational schemes' and 'techniques.' A methodology for selecting appropriate candidate techniques and their integration in the form of a 'hybrid' approach is proposed. Then an example is given through an integration of System Dynamics (SD), Bayesian Belief Network (BBN), Event Sequence Diagram (ESD), and Fault Tree (FT) in order to demonstrate the feasibility and value of hybrid techniques. The proposed hybrid approach integrates deterministic and probabilistic modeling perspectives, and provides a flexible risk management tool for complex socio-technical systems. An application of the hybrid technique is provided in the aviation safety domain, focusing on airline maintenance systems. The example demonstrates how the hybrid method can be used to analyze the dynamic effects of organizational factors on system risk

Interplay among Technical, Socio-Emotional and Personal Factors in Written Feedback Research

Science.gov (United States)

Chong, Ivan

2018-01-01

The centrality of written feedback is clearly seen from the proliferation of research in the context of higher education. As an increasingly expanding field in research, the majority of written feedback studies have been interested in investigating the technical aspect of how feedback should be given in order to promote student learning. More…

Technical clarity in inter-agency negotiations: Lessons from four hydropower projects

Science.gov (United States)

Burkardt, Nina; Lamb, Berton Lee; Taylor, Jonathan G.; Waddle, Terry J.

1995-01-01

We investigated the effect of technical clarity on success in multi-party negotiations in the Federal Energy Regulatory Commission (FERC) licensing process. Technical clarity is the shared understanding of dimensions such as the geographic extent of the project, range of flows to be considered, important species and life stages, and variety of water uses considered. The results of four hydropower licensing consultations are reported. Key participants were interviewed to ascertain the level of technical clarity present during the consultations and the degree to which the consultations were successful. Technical clarity appears to be a prerequisite for successful outcomes. Factors that enhance technical clarity include simple project design, new rather than existing projects, precise definition of issues, a sense of urgency to reach agreement, a sense of fairness among participants, and consistency in participation. Negotiators should not neglect the critical pre-negotiation steps of defining technical issues and determining appropriate studies, deciding how to interpret studies, and agreeing on responses to study results.

Setting Performance Standards for Technical and Nontechnical Competence in General Surgery.

Science.gov (United States)

Szasz, Peter; Bonrath, Esther M; Louridas, Marisa; Fecso, Andras B; Howe, Brett; Fehr, Adam; Ott, Michael; Mack, Lloyd A; Harris, Kenneth A; Grantcharov, Teodor P

2017-07-01

The objectives of this study were to (1) create a technical and nontechnical performance standard for the laparoscopic cholecystectomy, (2) assess the classification accuracy and (3) credibility of these standards, (4) determine a trainees' ability to meet both standards concurrently, and (5) delineate factors that predict standard acquisition. Scores on performance assessments are difficult to interpret in the absence of established standards. Trained raters observed General Surgery residents performing laparoscopic cholecystectomies using the Objective Structured Assessment of Technical Skill (OSATS) and the Objective Structured Assessment of Non-Technical Skills (OSANTS) instruments, while as also providing a global competent/noncompetent decision for each performance. The global decision was used to divide the trainees into 2 contrasting groups and the OSATS or OSANTS scores were graphed per group to determine the performance standard. Parametric statistics were used to determine classification accuracy and concurrent standard acquisition, receiver operator characteristic (ROC) curves were used to delineate predictive factors. Thirty-six trainees were observed 101 times. The technical standard was an OSATS of 21.04/35.00 and the nontechnical standard an OSANTS of 22.49/35.00. Applying these standards, competent/noncompetent trainees could be discriminated in 94% of technical and 95% of nontechnical performances (P < 0.001). A 21% discordance between technically and nontechnically competent trainees was identified (P < 0.001). ROC analysis demonstrated case experience and trainee level were both able to predict achieving the standards with an area under the curve (AUC) between 0.83 and 0.96 (P < 0.001). The present study presents defensible standards for technical and nontechnical performance. Such standards are imperative to implementing summative assessments into surgical training.

Interchange rotation factors and player characteristics influence physical and technical performance in professional Australian Rules football.

Science.gov (United States)

Dillon, Patrick A; Kempton, Thomas; Ryan, Samuel; Hocking, Joel; Coutts, Aaron J

2018-03-01

To examine the effects of match-related and individual player characteristics on activity profile and technical performance during rotations in professional Australian football. Longitudinal observational study. Global positioning system data and player rating scores were collected from 33 professional Australian football players during 15 Australian football League matches. Player rating scores were time aligned with their relative total and high-speed running (HSR) distance (>20kmh -1 ) for each on ground rotation. Individual players' maximal aerobic running speed (MAS) was determined from a two-kilometre trial. A multilevel linear mixed model was used to examine the influence of rotations on physical activity profiles and skill execution during match play. Rotation duration and accumulated distance resulted in a trivial-to-moderate reduction in relative total and HSR distances as well as relative rating points. The number of disposals in a rotation had a small positive effect on relative total and HSR distances and a large positive effect on relative rating points. MAS was associated with a moderate-to-large increase in relative total distance, but had a large negative effect on relative rating points. Previous rotation time, stoppages and the number of rotations in the quarter had a trivial-to-small negative effect on relative total and HSR distances. A greater speed (mmin -1 ) was associated with a trivial increase in rating points during a rotation, while there was a trivial decrease in relative total distance as rating points increased. The complex relationship between factors that influence activity profile and technical performance during rotations in Australian football needs to be considered when interpreting match performance. Copyright © 2017 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

MODELS CONCERNING PREVENTIVE VERIFICATION OF TECHNICAL EQUIPMENT

Directory of Open Access Journals (Sweden)

CÂRLAN M.

2016-12-01

Full Text Available The paper presents three operative models whose purpose is to improve the practice of preventive maintenance to a wide range of technical installations. Although the calculation criteria are different, the goal is the same: to determine the optimum time between two consecutive preventive interventions. The optimum criteria of these models are: - the maximum share of technical entity operating probabilities, in the case of the Ackoff - Sasieni [1] method; -the optimum time interval for preventive verification depending on the preventive-corrective maintenance costs imposed by the deciding factor, for the AsturioBaldin [2] model; - the minimum number of renewals – preventive and/or corrective maintenance operations [3

Technical efficiency and productivity of Chinese county hospitals: an exploratory study in Henan province, China

Science.gov (United States)

Cheng, Zhaohui; Tao, Hongbing; Cai, Miao; Lin, Haifeng; Lin, Xiaojun; Shu, Qin; Zhang, Ru-ning

2015-01-01

Objectives Chinese county hospitals have been excessively enlarging their scale during the healthcare reform since 2009. The purpose of this paper is to examine the technical efficiency and productivity of county hospitals during the reform process, and to determine whether, and how, efficiency is affected by various factors. Setting and participants 114 sample county hospitals were selected from Henan province, China, from 2010 to 2012. Outcome measures Data envelopment analysis was employed to estimate the technical and scale efficiency of sample hospitals. The Malmquist index was used to calculate productivity changes over time. Tobit regression was used to regress against 4 environmental factors and 5 institutional factors that affected the technical efficiency. Results (1) 112 (98.2%), 112 (98.2%) and 104 (91.2%) of the 114 sample hospitals ran inefficiently in 2010, 2011 and 2012, with average technical efficiency of 0.697, 0.748 and 0.790, respectively. (2) On average, during 2010–2012, productivity of sample county hospitals increased by 7.8%, which was produced by the progress in technical efficiency changes and technological changes of 0.9% and 6.8%, respectively. (3) Tobit regression analysis indicated that government subsidy, hospital size with above 618 beds and average length of stay assumed a negative sign with technical efficiency; bed occupancy rate, ratio of beds to nurses and ratio of nurses to physicians assumed a positive sign with technical efficiency. Conclusions There was considerable space for technical efficiency improvement in Henan county hospitals. During 2010–2012, sample hospitals experienced productivity progress; however, the adverse change in pure technical efficiency should be emphasised. Moreover, according to the Tobit results, policy interventions that strictly supervise hospital bed scale, shorten the average length of stay and coordinate the proportion among physicians, nurses and beds, would benefit hospital efficiency

Revisiting the utility of technical performance scores following tetralogy of Fallot repair.

Science.gov (United States)

Lodin, Daud; Mavrothalassitis, Orestes; Haberer, Kim; Sunderji, Sherzana; Quek, Ruben G W; Peyvandi, Shabnam; Moon-Grady, Anita; Karamlou, Tara

2017-08-01

Although an important quality metric, current technical performance scores may not be generalizable and may omit operative factors that influence outcomes. We examined factors not included in current technical performance scores that may contribute to increased postoperative length of stay, major complications, and cost after primary repair of tetralogy of Fallot. This is a retrospective single site study of patients younger than age 2 years with tetralogy of Fallot undergoing complete repair between 2007 and 2015. Medical record data and discharge echocardiograms were reviewed to ascertain component and composite technical performance scores. Primary outcomes included postoperative length of stay, major complications, and total hospital costs. Multivariable logistic and linear regression identified determinants of each outcome. Patient population (n = 115) had a median postoperative length of stay of 8 days (interquartile range, 6-10 days), and a median total cost of $71,147. Major complications occurred in 33 patients (29%) with 1 death. Technical performance scores assigned were optimum in 28 patients (25%), adequate in 59 patients (52%), and inadequate in 26 patients (23%). Neither technical performance score components nor composite scores were associated with increased postoperative length of stay. Optimum or adequate repairs versus inadequate had equal risk of a complication (P = .79), and equivalent mean total cost ($100,000 vs $187,000; P = .25). Longer cardiopulmonary bypass time per 1-minute increase (P technical performance scores were not associated with selected outcomes in our postoperative population. Although returning to bypass and bypass length are not included as components in the current score, these are important factors influencing complications and resource use in our population. Revisions anticipated from a prospective trial should consider including these variables. Copyright © 2017 The American Association for Thoracic Surgery

Why are you satisfied with an online game?:exploring game attractiveness and gaming climate from a socio-technical perspective

OpenAIRE

Zuo, W. (Wangjing)

2016-01-01

Abstract Some online games are prosperous and have attracted a large number of players, while others cannot sustain. Both technical and social factors likely affect a player’s satisfaction with an online game. However, there is a clear dearth of studies in which have investigated online games from a socio-technical perspective. This article seeks to address this gap through an empirical study on technical factors (manifesti...

Processing closely spaced lesions during Nucleotide Excision Repair triggers mutagenesis in E. coli

Science.gov (United States)

Isogawa, Asako; Fujii, Shingo

2017-01-01

It is generally assumed that most point mutations are fixed when damage containing template DNA undergoes replication, either right at the fork or behind the fork during gap filling. Here we provide genetic evidence for a pathway, dependent on Nucleotide Excision Repair, that induces mutations when processing closely spaced lesions. This pathway, referred to as Nucleotide Excision Repair-induced Mutagenesis (NERiM), exhibits several characteristics distinct from mutations that occur within the course of replication: i) following UV irradiation, NER-induced mutations are fixed much more rapidly (t ½ ≈ 30 min) than replication dependent mutations (t ½ ≈ 80–100 min) ii) NERiM specifically requires DNA Pol IV in addition to Pol V iii) NERiM exhibits a two-hit dose-response curve that suggests processing of closely spaced lesions. A mathematical model let us define the geometry (infer the structure) of the toxic intermediate as being formed when NER incises a lesion that resides in close proximity of another lesion in the complementary strand. This critical NER intermediate requires Pol IV / Pol II for repair, it is either lethal if left unrepaired or mutation-prone when repaired. Finally, NERiM is found to operate in stationary phase cells providing an intriguing possibility for ongoing evolution in the absence of replication. PMID:28686598

Technical Support Essentials Advice to Succeed in Technical Support

CERN Document Server

Sanchez, Andrew

2010-01-01

Technical Support Essentials is a book about the many facets of technical support. It attempts to provide a wide array of topics to serve as points of improvement, discussion, or simply topics that you might want to learn. The topics range from good work habits to the way technical supportgroups establish their own style of work. This book applies theories, models, and concepts synthesized from existing research in other fields-such as management, economics, leadership, and psychology-and connects them to technical support. The goal is to build on the work of others and allow their success to

Relationship between intraoperative non-technical performance and technical events in bariatric surgery.

Science.gov (United States)

Fecso, A B; Kuzulugil, S S; Babaoglu, C; Bener, A B; Grantcharov, T P

2018-03-30

The operating theatre is a unique environment with complex team interactions, where technical and non-technical performance affect patient outcomes. The correlation between technical and non-technical performance, however, remains underinvestigated. The purpose of this study was to explore these interactions in the operating theatre. A prospective single-centre observational study was conducted at a tertiary academic medical centre. One surgeon and three fellows participated as main operators. All patients who underwent a laparoscopic Roux-en-Y gastric bypass and had the procedures captured using the Operating Room Black Box ® platform were included. Technical assessment was performed using the Objective Structured Assessment of Technical Skills and Generic Error Rating Tool instruments. For non-technical assessment, the Non-Technical Skills for Surgeons (NOTSS) and Scrub Practitioners' List of Intraoperative Non-Technical Skills (SPLINTS) tools were used. Spearman rank-order correlation and N-gram statistics were conducted. Fifty-six patients were included in the study and 90 procedural steps (gastrojejunostomy and jejunojejunostomy) were analysed. There was a moderate to strong correlation between technical adverse events (r s  = 0·417-0·687), rectifications (r s  = 0·380-0·768) and non-technical performance of the surgical and nursing teams (NOTSS and SPLINTS). N-gram statistics showed that after technical errors, events and prior rectifications, the staff surgeon and the scrub nurse exhibited the most positive non-technical behaviours, irrespective of operator (staff surgeon or fellow). This study demonstrated that technical and non-technical performances are related, on both an individual and a team level. Valuable data can be obtained around intraoperative errors, events and rectifications. © 2018 BJS Society Ltd Published by John Wiley & Sons Ltd.

Current technical issues in international safeguards

International Nuclear Information System (INIS)

Bennett, C.A.

1977-01-01

Safeguards systems, and the associated need for technical and systems development, reflect changing conditions and concerns associated with the nuclear fuel cycle and the safety and security of nuclear materials and facilities. In particular, the implementation of international safeguards has led to the recognition of certain technical issues, both old and new, which are in need of resolution. These are: 1. The grading of nuclear materials and facilities with respect to their relative safeguards significance. 2. The extension and upgrading of safeguards techniques to maintain adequate protection in view of constantly increasing amounts of material to be safeguarded. 3. The balance between safeguards mechanisms based on physical protection and material accounting, and the role of surveillance and containment in each case. 4. The role of information systems as a basis for both analytical feedback and the determination of the factors affecting system effectiveness and their interrelationship. 5. A determination of the degree to which the overall technical effectiveness of international inspection activities can be quantified. Each of these technical issues must be considered in light of the specific objectives of international safeguards, which differ from domestic safeguards in terms of the level of the threat, the safeguards mechanisms available, and the diversion strategies assumed. Their resolution in this international context is essential if the effectiveness and viability of international safeguards are to be maintained

Imagining Technicities

DEFF Research Database (Denmark)

Liboriussen, Bjarke; Plesner, Ursula

2011-01-01

to the elements of taste and skill. In the final analysis those references were synthesized as five imagined technicities: the architect, the engineer, the client, the Chinese, and the Virtual World native. Because technicities are often assumed and rarely discussed as actants who influence practice, their role......, this article focuses on innovative uses of virtual worlds in architecture. We interviewed architects, industrial designers and other practitioners. Conceptually supported by an understanding of technicity found in Cultural Studies, the interviews were then coded with a focus on interviewees’ references...... in cooperation and development of ICTs seems to pass unnoticed. However, since they are aligned into ICTs, technicities impact innovation....

Technical analysis as a tool of market timing

International Nuclear Information System (INIS)

Rafferty, J.

2002-01-01

Risk management teams carry a high burden because businesses have to compete on a global scale. Timing is everything, once a decision to hedge in the futures has been made. How to determine when it is a good time to buy or sell, and be certain that this information has not already been factored into the price is tricky. There are two schools: fundamental analysis and technical analysis. Statistics and supply and demand data are examined to determine why in fundamental analysis, while technical analysis determines when by interpreting charts. With the help of charts that were displayed, the author examined the price of crude oil in 1990 and 1991 in an attempt to demonstrate technical analysis. Technical analysis is based on mathematics, but it is more art than science. It looks at market patterns that repeat themselves endlessly. Markets almost always enter into a period of consolidation or distribution when they break out. Additional charts displaying the price of crude oil for various periods from 1986 to 1991 were presented and analysed. The author concluded by stating that technical analysis provides visual guidelines to hedgers and traders to assist them in making intelligent forecasts about price and risk. figs

Foundations for technical solutions in organizing excavation of open ore pits

OpenAIRE

С. И. Фомин

2016-01-01

To study stochastic mining technical systems of opencast mines, where parallel to clearly defined values random and indefinite factors operate, probabilistic and statistical techniques are mostly used nowadays. Formally, the task of producing a design solution may, under the conditions of indeterminacy be transformed into an equivalent deterministic problem formulated for a risky situation. Uncertainty in the initial mining, geological and technical-economic information available during t...

Technical Training: Technical Training Seminar

CERN Multimedia

2004-01-01

Tuesday 30 March TECHNICAL TRAINING SEMINAR From 9:00 to 12:00 and from 13:00 to 16:00 hrs - Council Chamber, Salle B, Salle des Pas Perdus National Instruments (NI) on Tour 2004 Claudia Jüngel, Evrem Yarkin, Joel Clerc, Hervé Baour / NATIONAL INSTRUMENTS The special event NI on Tour 2004, run in Germany, Austria and Switzerland, will be at CERN on March 30. Technical seminars and free introductory courses will be offered all day long in the Council Chamber, Salle B, and Salle des Pas Perdus (buildings 61 and 503). Technical conferences: 09:00 - 12:00 Data acquisition systems on PCs. Industrial measurement and control techniques. 13:00 - 16:00 Advanced LabVIEW software and PXI instrumentation. Measuring instruments and system components for teststand automation. Introductory courses: 09:00 - 12:00 DIAdem: Data analysis and presentation 13:00 - 16:00 Data acquisition with LabVIEW Language: English and French Free special seminar. Registration is recommended with National Instruments Switzerland (please sp...

Technical Training: Technical Training Seminar

CERN Multimedia

2004-01-01

Tuesday 30 March TECHNICAL TRAINING SEMINAR From 9:00 to 12:00 and from 13:00 to 16:00 hrs - Council Chamber, Salle B, Salle des Pas Perdus National Instruments (NI) on Tour 2004 Claudia Jüngel, Evrem Yarkin, Joel Clerc, Hervé Baour / NATIONAL INSTRUMENTS The special event NI on Tour 2004, run in Germany, Austria and Switzerland, will be at CERN on March 30. Technical seminars and free introductory courses will be offered all day long in the Council Chamber, Salle B, and Salle des Pas Perdus (buildings 61 and 503). Technical conferences: 09:00 - 12:00 Data acquisition systems on PCs. Industrial measurement and control techniques. 13:00 - 16:00 Advanced LabVIEW software and PXI instrumentation. Measuring instruments and system components for teststand automation. Introductory courses: 09:00 - 12:00 DIAdem: Data analysis and presentation 13:00 - 16:00 Data acquisition with LabVIEW Language: English and French Free special seminar. Registration is recommended with National Instruments Swi...

Technical Training: Technical Training Seminar

CERN Multimedia

2004-01-01

TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch Monday 9 February 2004 From 10:00 to 12:00 - IT Auditorium - bldg. 31, 3rd floor ANSOFT High-Frequency Seminar David Prestaux, Application Engineer, ANSOFT F-78535 BUC, France This Technical Training seminar will present two Ansoft application products: Ansoft HFSS and Ansoft Designer. Ansoft HFSS makes use of the Finite Element Method (FEM) to calculate field solutions from first principles. It can accurately predict all high-frequency behaviours such as dispersion, mode conversion, and losses due to materials and radiation. Ansoft Designer is a suite of design tools to fully integrate high-frequency, physics-based electromagnetic simulations into a seamless system-level simulation environment. Ansoft Designer uses a simple interface to give complete control over every design task, by a method allowing multiple solvers, Solver on Demand. • Introduction • Overview of the Ansoft Total solution • Ansoft HFSS 9...

Housing and Macroeconomy: The Role of Credit Channel, Risk -, Demand - and Monetary Shocks

OpenAIRE

Dorofeenko, Victor; Lee, Gabriel; Salyer, Kevin; Strobel, Johannes

2016-01-01

This paper demonstrates that risk (uncertainty) along with the monetary (interest rates) shocks to the housing production sector are a quantitatively important impulse mechanism for the business and housing cycles. Our model framework is that of the housing supply/banking sector model as developed in Dorofeenko, Lee, and Salyer (2014) with the model of housing demand presented in Iacoviello and Neri (2010). We examine how the factors of production uncertainty,financial intermediation, and ...

CSNI technical opinion papers no.10. The role of human and organisational factors in nuclear power plant modifications

International Nuclear Information System (INIS)

2009-01-01

Nuclear power plant modifications may be needed for a number of different reasons. These include physical ageing of plant systems, structures and components; obsolescence in hardware and software; feedback from operating experience; and opportunities for improved plant safety, reliability or capability. However, experience has also shown that weaknesses in the design and/or implementation of modifications can present significant challenges to plant safety. They can also have a considerable impact on the commercial performance of the plant. It is therefore important that the plant modification process reflect a recognition of the potential impact of human errors and that it incorporate suitable measures to minimise the potential for such errors. In this context, the NEA Committee on the Safety of Nuclear Installations (CSNI) and its Working Group on Human and Organisational Factors organised an international workshop in 2003 to discuss the role of human and organisational performance in the nuclear plant modification process. This technical opinion paper represents the consensus of specialists in human and organisational factors (HOF) in the NEA member countries on commendable practices and approaches to dealing with nuclear plant modifications. It considers factors that should be taken into account when developing a modification process and identifies some lessons learnt from application of the process. The paper should be of particular interest of nuclear safety regulators and nuclear power plant operators. (author)

DIRECT ENERGY CONVERSION (DEC) FISSION REACTORS - A U.S. NERI PROJECT

International Nuclear Information System (INIS)

Beller, D.; Polansky, G.

2000-01-01

The direct conversion of the electrical energy of charged fission fragments was examined early in the nuclear reactor era, and the first theoretical treatment appeared in the literature in 1957. Most of the experiments conducted during the next ten years to investigate fission fragment direct energy conversion (DEC) were for understanding the nature and control of the charged particles. These experiments verified fundamental physics and identified a number of specific problem areas, but also demonstrated a number of technical challenges that limited DEC performance. Because DEC was insufficient for practical applications, by the late 1960s most R and D ceased in the US. Sporadic interest in the concept appears in the literature until this day, but there have been no recent programs to develop the technology. This has changed with the Nuclear Energy Research Initiative that was funded by the U.S. Congress in 1999. Most of the previous concepts were based on a fission electric cell known as a triode, where a central cathode is coated with a thin layer of nuclear fuel. A fission fragment that leaves the cathode with high kinetic energy and a large positive charge is decelerated as it approaches the anode by a charge differential of several million volts, it then deposits its charge in the anode after its kinetic energy is exhausted. Large numbers of low energy electrons leave the cathode with each fission fragment; they are suppressed by negatively biased on grid wires or by magnetic fields. Other concepts include magnetic collimators and quasi-direct magnetohydrodynamic generation (steady flow or pulsed). We present the basic principles of DEC fission reactors, review the previous research, discuss problem areas in detail and identify technological developments of the last 30 years relevant to overcoming these obstacles. A prognosis for future development of direct energy conversion fission reactors will be presented

Factors exercizing a technical inluence to be taken into consideration in the establishment and execution of a quality assurance programme for pressure vessels

International Nuclear Information System (INIS)

Anon.

1979-01-01

This document shows in tabular form the technical factors to be taken into consideration during the various stages of the fabrication of pressure vessels. A system of symbols makes it possible to determine at each stage, that is to say, from the checking of the design up to going into service, as a function of the materials used, the conditions of service, thicknesses, heat treatment etc., the mechanical and non-destructive tests most appropriate to the detection of any defects [fr

Incorporating organizational factors into Probabilistic Risk Assessment (PRA) of complex socio-technical systems: A hybrid technique formalization

Energy Technology Data Exchange (ETDEWEB)

Mohaghegh, Zahra [Center for Risk and Reliability, University of Maryland, College Park, MD 20742 (United States)], E-mail: mohagheg@umd.edu; Kazemi, Reza; Mosleh, Ali [Center for Risk and Reliability, University of Maryland, College Park, MD 20742 (United States)

2009-05-15

This paper is a result of a research with the primary purpose of extending Probabilistic Risk Assessment (PRA) modeling frameworks to include the effects of organizational factors as the deeper, more fundamental causes of accidents and incidents. There have been significant improvements in the sophistication of quantitative methods of safety and risk assessment, but the progress on techniques most suitable for organizational safety risk frameworks has been limited. The focus of this paper is on the choice of 'representational schemes' and 'techniques.' A methodology for selecting appropriate candidate techniques and their integration in the form of a 'hybrid' approach is proposed. Then an example is given through an integration of System Dynamics (SD), Bayesian Belief Network (BBN), Event Sequence Diagram (ESD), and Fault Tree (FT) in order to demonstrate the feasibility and value of hybrid techniques. The proposed hybrid approach integrates deterministic and probabilistic modeling perspectives, and provides a flexible risk management tool for complex socio-technical systems. An application of the hybrid technique is provided in the aviation safety domain, focusing on airline maintenance systems. The example demonstrates how the hybrid method can be used to analyze the dynamic effects of organizational factors on system risk.

Biasogram: visualization of confounding technical bias in gene expression data

DEFF Research Database (Denmark)

Krzystanek, Marcin; Szallasi, Zoltan Imre; Eklund, Aron Charles

2013-01-01

Gene expression profiles of clinical cohorts can be used to identify genes that are correlated with a clinical variable of interest such as patient outcome or response to a particular drug. However, expression measurements are susceptible to technical bias caused by variation in extraneous factors...... such as RNA quality and array hybridization conditions. If such technical bias is correlated with the clinical variable of interest, the likelihood of identifying false positive genes is increased. Here we describe a method to visualize an expression matrix as a projection of all genes onto a plane defined...... by a clinical variable and a technical nuisance variable. The resulting plot indicates the extent to which each gene is correlated with the clinical variable or the technical variable. We demonstrate this method by applying it to three clinical trial microarray data sets, one of which identified genes that may...

Factors affecting employee attrition among engineers and non-engineers in manufacturing industry

Directory of Open Access Journals (Sweden)

Bhardwaj, Shikha

2017-12-01

Full Text Available Almost every industry nowadays is badly affected by attrition. Retention of talented employees is the biggest problem faced by India Incorporation. In order to gather more insights on the talent crunch, the undertaken study was conducted on technical and non-technical jobs in manufacturing sector in Delhi NCR. Research has identified three major factors – Salary, Boss and Stress in the jobs after conducted interviews with around 50 technical and non-technical respondents. A set of questions were prepared and send to 120 employee but only 75 responded. The study shows a strong relationship between type of job and factors of attrition. Chi-square test clearly states strong relationship among two. Thus, any change in one will affect the other also. At the same time other important outcomes were that for technical jobs salary is the most important factor whereas non-technical Boss is the factor. Out 75, 63 were engineer and rest were non-engineer. The research can be further done to understand factors of attrition with other demographic variable.

The socio-technical organisation of community pharmacies as a factor in the Electronic Prescription Service Release Two implementation: a qualitative study.

Science.gov (United States)

Harvey, Jasmine; Avery, Anthony J; Waring, Justin; Barber, Nick

2012-12-20

The introduction of a new method of transmitting prescriptions from general practices to community pharmacies in England (Electronic Prescription Service Release 2 (EPS2)) has generated debate on how it will change work practice. As EPS2 will be a key technical element in dispensing, we reviewed the literature to find that there were no studies on how social and technical elements come together to form work practice in community pharmacies. This means the debate has little point of reference. Our aim therefore was to study the ways social and technical elements of a community pharmacy are used to achieve dispensing through the development of a conceptual model on pharmacy work practice, and to consider how a core technical element such the EPS2 could change work practice. We used ethnographic methods inclusive of case-study observations and interviews to collect qualitative data from 15 community pharmacies that were in the process of adopting or were soon to adopt EPS2. We analysed the case studies thematically and used rigorous multi-dimensional and multi-disciplinary interpretive validation techniques to cross analyse findings. In practice, dispensing procedures were not designed to take into account variations in human and technical integration, and assumed that repetitive and collective use of socio-technical elements were at a constant. Variables such as availability of social and technical resources, and technical know-how of staff were not taken into account in formalised procedures. Yet community pharmacies were found to adapt their dispensing in relation to the balance of social and technical elements available, and how much of the social and technical elements they were willing to integrate into dispensing. While some integrated as few technical elements as possible, some depended entirely on technical artefacts. This pattern also applied to the social elements of dispensing. Through the conceptual model development process, we identified three

Conceptual aspects: analyses law, ethical, human, technical, social factors of development ICT, e-learning and intercultural development in different countries setting out the previous new theoretical model and preliminary findings

NARCIS (Netherlands)

Kommers, Petrus A.M.; Smyrnova-Trybulska, Eugenia; Morze, Natalia; Issa, Tomayess; Issa, Theodora

2015-01-01

This paper, prepared by an international team of authors focuses on the conceptual aspects: analyses law, ethical, human, technical, social factors of ICT development, e-learning and intercultural development in different countries, setting out the previous and new theoretical model and preliminary

Technical efficiency and productivity of Chinese county hospitals: an exploratory study in Henan province, China.

Science.gov (United States)

Cheng, Zhaohui; Tao, Hongbing; Cai, Miao; Lin, Haifeng; Lin, Xiaojun; Shu, Qin; Zhang, Ru-Ning

2015-09-09

Chinese county hospitals have been excessively enlarging their scale during the healthcare reform since 2009. The purpose of this paper is to examine the technical efficiency and productivity of county hospitals during the reform process, and to determine whether, and how, efficiency is affected by various factors. 114 sample county hospitals were selected from Henan province, China, from 2010 to 2012. Data envelopment analysis was employed to estimate the technical and scale efficiency of sample hospitals. The Malmquist index was used to calculate productivity changes over time. Tobit regression was used to regress against 4 environmental factors and 5 institutional factors that affected the technical efficiency. (1) 112 (98.2%), 112 (98.2%) and 104 (91.2%) of the 114 sample hospitals ran inefficiently in 2010, 2011 and 2012, with average technical efficiency of 0.697, 0.748 and 0.790, respectively. (2) On average, during 2010-2012, productivity of sample county hospitals increased by 7.8%, which was produced by the progress in technical efficiency changes and technological changes of 0.9% and 6.8%, respectively. (3) Tobit regression analysis indicated that government subsidy, hospital size with above 618 beds and average length of stay assumed a negative sign with technical efficiency; bed occupancy rate, ratio of beds to nurses and ratio of nurses to physicians assumed a positive sign with technical efficiency. There was considerable space for technical efficiency improvement in Henan county hospitals. During 2010-2012, sample hospitals experienced productivity progress; however, the adverse change in pure technical efficiency should be emphasised. Moreover, according to the Tobit results, policy interventions that strictly supervise hospital bed scale, shorten the average length of stay and coordinate the proportion among physicians, nurses and beds, would benefit hospital efficiency. Published by the BMJ Publishing Group Limited. For permission to use (where

A study on intensifying efficiency for international collaborative development of advanced nuclear energy technology

Energy Technology Data Exchange (ETDEWEB)

Lee, J. H.; Hahn, D. H.; Song, K. C.; Chang, J. H.; Kim, H. J.; Kim, H. J.; Lim, C. Y.; Lee, D. S.; Lee, Y. J. [KAERI, Daejeon (Korea, Republic of)

2011-03-15

The objective of the study was to participate the GIF for the efficient propulsion of future nuclear system development. For achieving the objective of this study, the followings were carried out. {Omicron} Analyze the international/domestic trends in the future nuclear energy system {Omicron} Analyze the domestic long-term R and D program for the future nuclear system and assist its implementation - Review the agenda of the executive committee, the technical committee, and sub-technical committee - Assist the committee meetings and workshops related to the future nuclear energy system {Omicron} Develop the participation strategy for the collaborative development of Gen-IV technology and conducting the international cooperation activities - Support the delegation by reviewing the agenda of GIF meetings in the technical and legal perspective - Research the system R and D arrangement and report its progress - Participate in the SFR SIA PA negotiation meeting and report its progress {Omicron} Support the activities related to I-NERI between Korea and U.S. - Support a delegation by reviewing the agenda in the technical/legal point of view - Participate in the BINERIC meetings and Support the related activities The result of this study may be used for 1) contribution to establishing the effective foundation and broadening the cooperation activities between the advanced countries and Korea and 2) contribution effective management of Gen IV international collaboration by technical/legal supporting

A study on intensifying efficiency for international collaborative development of advanced nuclear energy technology

International Nuclear Information System (INIS)

Lee, J. H.; Hahn, D. H.; Song, K. C.; Chang, J. H.; Kim, H. J.; Kim, H. J.; Lim, C. Y.; Lee, D. S.; Lee, Y. J.

2011-03-01

The objective of the study was to participate the GIF for the efficient propulsion of future nuclear system development. For achieving the objective of this study, the followings were carried out. Ο Analyze the international/domestic trends in the future nuclear energy system Ο Analyze the domestic long-term R and D program for the future nuclear system and assist its implementation - Review the agenda of the executive committee, the technical committee, and sub-technical committee - Assist the committee meetings and workshops related to the future nuclear energy system Ο Develop the participation strategy for the collaborative development of Gen-IV technology and conducting the international cooperation activities - Support the delegation by reviewing the agenda of GIF meetings in the technical and legal perspective - Research the system R and D arrangement and report its progress - Participate in the SFR SIA PA negotiation meeting and report its progress Ο Support the activities related to I-NERI between Korea and U.S. - Support a delegation by reviewing the agenda in the technical/legal point of view - Participate in the BINERIC meetings and Support the related activities The result of this study may be used for 1) contribution to establishing the effective foundation and broadening the cooperation activities between the advanced countries and Korea and 2) contribution effective management of Gen IV international collaboration by technical/legal supporting

Predisposition Factors of Career and Technical Education Transfer Students: A Hermeneutic Phenomenology Study

Science.gov (United States)

Hioki, Warren; Lester, Derek; Martinez, Mario

2015-01-01

Six college students, who were career and technical education (CTE) transfer students in the state of Nevada, were interviewed Spring Semester of 2009. The study used a hermeneutic phenomenology framework as the method to identify those predisposition variables that heavily influenced the students in their decision to transfer to a senior…

Technical efficiency analysis for oilseed sunflower farms: a case study in Erzurum, Turkey.

Science.gov (United States)

Külekçi, Murat

2010-07-01

The main purpose of this study was to examine the technical efficiency of farms producing sunflower in Erzurum, Turkey and to identify factors that might be causing inefficiency. Stochastic frontier analysis was used to measure technical efficiency. One hundred and seventeen randomly selected farms were interviewed for farm-level data in the 2004-2005 production period. Results revealed that the mean technical efficiency for the sunflower farms, estimated by the stochastic production frontier, is 64%. At full technical efficiency, on average, the farmers could reduce their inputs by around 56% without reducing their sunflower production, simply by improving technical efficiency. In the inefficiency model the parameter estimates showed that older farmers, higher level of farmer's education, more experienced farmers, larger farm size and higher information score resulted in lower technical inefficiency, while bigger family size and more credit usage resulted in higher technical inefficiency. This study proposes strategies such as providing better extension services and farmer-training programmes, including more educated people in sunflower farming and also expanding the sunflower-growing area through provision of adequate facilities in order to increase technical efficiency.

SIMS study on statistics and environmental factors in health. Final technical report to Department of Energy

International Nuclear Information System (INIS)

1982-07-01

This final technical report to DOE consists of five individual technical reports and one working paper by members of the SIMS Study at Stanford. Research topics include testing goodness-of-fit for the distribution of errors in regression models, mathematical models of cancer and their use in risk assessment, pollutant standards index (Psi), osteosarcomas among beagles exposed to 239 Plutonium, air pollution and respiratory disease, and models of human exposure to air pollution. Individual summaries of the six reports are indexed separately

Technical Efficiency of Beef Cattle Breeding Business in East Java Province

Directory of Open Access Journals (Sweden)

L. S. Kalangi

2014-08-01

Full Text Available The objectives of this research were to compare technical efficiency of beef cattle business operating in lowland and upland areas of East Java and to identify and analyze factors affecting the technical efficiency as well as inefficiency of that business. A survey was conducted to 89 farmers in the lowland area of Probolinggo District and 97 farmers in the upland areas of Malang Districts during the period of February-March 2013. Results of stochastic frontier production function with MLE method showed that the average technical efficiency in lowland area was higher (80% compared to that in upland area (64%. The results indicated that beef cattle production was highly significant and positively influenced by total of grasses and forages, rice straw, feed supplements, stock of cattle, labor time allocation and service per conception. However, location of the business, whether in lowland and upland areas was a significant factor that could increase the efficiency. Some factors that could significantly reduce the technical inefficiency of beef cattle business were: labor force in family, education level, proportion of beef cattle income to total household income, age of cattle sold, cattle health examination, ownership status of the cattle, and gender. Therefore, (1 the existing farmers group should be improved their role to facilitate trading of cattle feed, and (2 the government should facilitate the farmers in the provision of funding tu buy beef cattle with a subsidized interest rate, so the farmers will be more enthusiast in taking care of their cattle, thus could improve their production efficiency.

Technical-Induced Hemolysis in Patients with Respiratory Failure Supported with Veno-Venous ECMO - Prevalence and Risk Factors.

Science.gov (United States)

Lehle, Karla; Philipp, Alois; Zeman, Florian; Lunz, Dirk; Lubnow, Matthias; Wendel, Hans-Peter; Göbölös, Laszlo; Schmid, Christof; Müller, Thomas

2015-01-01

The aim of the study was to explore the prevalence and risk factors for technical-induced hemolysis in adults supported with veno-venous extracorporeal membrane oxygenation (vvECMO) and to analyze the effect of hemolytic episodes on outcome. This was a retrospective, single-center study that included 318 adult patients (Regensburg ECMO Registry, 2009-2014) with acute respiratory failure treated with different modern miniaturized ECMO systems. Free plasma hemoglobin (fHb) was used as indicator for hemolysis. Throughout a cumulative support duration of 4,142 days on ECMO only 1.7% of the fHb levels were above a critical value of 500 mg/l. A grave rise in fHb indicated pumphead thrombosis (n = 8), while acute oxygenator thrombosis (n = 15) did not affect fHb. Replacement of the pumphead normalized fHb within two days. Neither pump or cannula type nor duration on the first system was associated with hemolysis. Multiple trauma, need for kidney replacement therapy, increased daily red blood cell transfusion requirements, and high blood flow (3.0-4.5 L/min) through small-sized cannulas significantly resulted in augmented blood cell trauma. Survivors were characterized by lower peak levels of fHb [90 (60, 142) mg/l] in comparison to non-survivors [148 (91, 256) mg/l, p≤0.001]. In conclusion, marked hemolysis is not common in vvECMO with modern devices. Clinically obvious hemolysis often is caused by pumphead thrombosis. High flow velocity through small cannulas may also cause technical-induced hemolysis. In patients who developed lung failure due to trauma, fHb was elevated independantly of ECMO. In our cohort, the occurance of hemolysis was associated with increased mortality.

Technical efficiency and its determinants in the spanish construction sector pre- and post-financial crisis

NARCIS (Netherlands)

Kapelko, Magdalena; Oude Lansink, A.G.J.M.

2015-01-01

This paper estimates technical efficiency in the Spanish construction sector before and after the start of the current financial crisis, and examines the impact of socio-economic factors on technical efficiency. Bias-corrected efficiency measures are obtained using Data Envelopment Analysis with

The socio-technical organisation of community pharmacies as a factor in the Electronic Prescription Service Release Two implementation: a qualitative study

Science.gov (United States)

2012-01-01

Background The introduction of a new method of transmitting prescriptions from general practices to community pharmacies in England (Electronic Prescription Service Release 2 (EPS2)) has generated debate on how it will change work practice. As EPS2 will be a key technical element in dispensing, we reviewed the literature to find that there were no studies on how social and technical elements come together to form work practice in community pharmacies. This means the debate has little point of reference. Our aim therefore was to study the ways social and technical elements of a community pharmacy are used to achieve dispensing through the development of a conceptual model on pharmacy work practice, and to consider how a core technical element such the EPS2 could change work practice. Method We used ethnographic methods inclusive of case-study observations and interviews to collect qualitative data from 15 community pharmacies that were in the process of adopting or were soon to adopt EPS2. We analysed the case studies thematically and used rigorous multi-dimensional and multi-disciplinary interpretive validation techniques to cross analyse findings. Results In practice, dispensing procedures were not designed to take into account variations in human and technical integration, and assumed that repetitive and collective use of socio-technical elements were at a constant. Variables such as availability of social and technical resources, and technical know-how of staff were not taken into account in formalised procedures. Yet community pharmacies were found to adapt their dispensing in relation to the balance of social and technical elements available, and how much of the social and technical elements they were willing to integrate into dispensing. While some integrated as few technical elements as possible, some depended entirely on technical artefacts. This pattern also applied to the social elements of dispensing. Through the conceptual model development process, we

The socio-technical organisation of community pharmacies as a factor in the Electronic Prescription Service Release Two implementation: a qualitative study

Directory of Open Access Journals (Sweden)

Harvey Jasmine

2012-12-01

Full Text Available Abstract Background The introduction of a new method of transmitting prescriptions from general practices to community pharmacies in England (Electronic Prescription Service Release 2 (EPS2 has generated debate on how it will change work practice. As EPS2 will be a key technical element in dispensing, we reviewed the literature to find that there were no studies on how social and technical elements come together to form work practice in community pharmacies. This means the debate has little point of reference. Our aim therefore was to study the ways social and technical elements of a community pharmacy are used to achieve dispensing through the development of a conceptual model on pharmacy work practice, and to consider how a core technical element such the EPS2 could change work practice. Method We used ethnographic methods inclusive of case-study observations and interviews to collect qualitative data from 15 community pharmacies that were in the process of adopting or were soon to adopt EPS2. We analysed the case studies thematically and used rigorous multi-dimensional and multi-disciplinary interpretive validation techniques to cross analyse findings. Results In practice, dispensing procedures were not designed to take into account variations in human and technical integration, and assumed that repetitive and collective use of socio-technical elements were at a constant. Variables such as availability of social and technical resources, and technical know-how of staff were not taken into account in formalised procedures. Yet community pharmacies were found to adapt their dispensing in relation to the balance of social and technical elements available, and how much of the social and technical elements they were willing to integrate into dispensing. While some integrated as few technical elements as possible, some depended entirely on technical artefacts. This pattern also applied to the social elements of dispensing. Through the conceptual

The Interactive Electronic Technical Manual: Requirements, Current Status, and Implementation. Strategy Considerations.

Science.gov (United States)

1991-07-01

authoring systems. Concurrently, great strides in computer-aided design and computer-aided maintenance have contributed to this capability. 12 Junod ...J.; William A. Nugent; and L. John Junod . Plan for the Navy/Air Force Test of the Interactive Electronic Technical Manual (IETM) at Cecil Field...AFHRL Logistics and Human Factors Division, WPAFB. Aug 1990. 12. Junod , John L. PY90 Interactive Electronic Technical Manual (IETM) Portable Delivery

METHOD IMPROVEMENT FOR DETERMINING THE TECHNICAL LEVEL OF CIVIL AIRCRAFT

Directory of Open Access Journals (Sweden)

2016-01-01

Full Text Available Aircraft are high-tech engineering products which are characterized by a wide range of properties including the two most important groups that respectively characterize the efficiency and technical level.Improving the aircraft efficiency is an essential factor for air transport development, but the efficiency can not be fully describe the technical system, especially in forecasting and new technology requirements development. Aircraft de- signer must evaluate the prospects of a technical solution, but it’s not always possible to calculate the efficiency accuratelyat the design stage. The operator should be able to choose the most technically-advanced aircraft available in the market inorder not to let it grow obsolete quickly. This determines the need for non-economic evaluation of technical systems that can be done by assessment of their technical level.The technical level is a general index that includes a set of technical perfection indicators. Technical perfection is reflected in terms of material and energy intensity, in terms of ergonomics, safety, etc. and is achieved as a result of origi- nal design solutions, the use of new high-strength low-density materials, the introduction of advanced technological pro-cesses, calculation methods, verification, testing, etc.There is a tight connection between the product properties and its weight, because weight is the material reflection of these properties. Therefore, improvement of the product properties usually leads to an intense increase of its weight. To deal with this phenomenon is only possible with widely using scientific and technical progress results. In accordance with this, the technical perfection can be interpreted as a major component of quality that is created without the weight increase. This approach requires investment in research and testing new technical solutions.The method was developed to determine the technical level of civil long-haul aircraft which has been modified to

Estimating Production Technical Efficiency of Irvingia Seed (Ogbono ...

African Journals Online (AJOL)

This study estimated the production technical efficiency of irvingia seed (Ogbono) farmers in Nsukka agricultural zone in Enugu State, Nigeria. This is against the backdrop of the importance of efficiency as a factor of productivity in a growing economy like Nigeria where resources are scarce and opportunities for new ...

Technical Network

CERN Multimedia

2007-01-01

In order to optimize the management of the Technical Network (TN), to ease the understanding and purpose of devices connected to the TN, and to improve security incident handling, the Technical Network Administrators and the CNIC WG have asked IT/CS to verify the "description" and "tag" fields of devices connected to the TN. Therefore, persons responsible for systems connected to the TN will receive email notifications from IT/CS asking them to add the corresponding information in the network database. Thank you very much for your cooperation. The Technical Network Administrators & the CNIC WG

Legitimizing Technical Communication in English Departments: Carolyn Miller's "Humanistic Rationale for Technical Writing"

Science.gov (United States)

Moore, Patrick

2006-01-01

Carolyn Miller's oft-cited "Humanistic Rationale for Technical Writing," published in 1979, tries to give technical communication faculty more cultural capital in English departments controlled by literature professors. Miller replaces a positivistic emphasis in technical communication pedagogy with rhetoric. She shows how technical knowledge is…

Strategy of technical innovation

International Nuclear Information System (INIS)

Lee, Ga Jong

1990-12-01

This book deals with policy of scientific technique and technical innovation such as research for development and types of technical innovation, historical development and process of technical innovation, economic growth, technology change and investment for research and development, structure and form of technical transfer with the meaning process, from, structure and theory, economic growth and investment of research and development with experiential analysis and case study on strategy of technical innovation in electron and fine chemical industry.

Urology technical and non-technical skills development: the emerging role of simulation.

Science.gov (United States)

Rashid, Prem; Gianduzzo, Troy R J

2016-04-01

To review the emerging role of technical and non-technical simulation in urological education and training. A review was conducted to examine the current role of simulation in urology training. A PUBMED search of the terms 'urology training', 'urology simulation' and 'urology education' revealed 11,504 titles. Three hundred and fifty-seven abstracts were identified as English language, peer reviewed papers pertaining to the role of simulation in urology and related topics. Key papers were used to explore themes. Some cross-referenced papers were also included. There is an ongoing need to ensure that training time is efficiently utilised while ensuring that optimal technical and non-technical skills are achieved. Changing working conditions and the need to minimise patient harm by inadvertent errors must be taken into account. Simulation models for specific technical aspects have been the mainstay of graduated step-wise low and high fidelity training. Whole scenario environments as well as non-technical aspects can be slowly incorporated into the curriculum. Doing so should also help define what have been challenging competencies to teach and evaluate. Dedicated time, resources and trainer up-skilling are important. Concurrent studies are needed to help evaluate the effectiveness of introducing step-wise simulation for technical and non-technical competencies. Simulation based learning remains the best avenue of progressing surgical education. Technical and non-technical simulation could be used in the selection process. There are good economic, logistic and safety reasons to pursue the process of ongoing development of simulation co-curricula. While the role of simulation is assured, its progress will depend on a structured program that takes advantage of what can be delivered via this medium. Overall, simulation can be developed further for urological training programs to encompass technical and non-technical skill development at all stages, including

Variation of Phenolic Content in Globe Artichoke in Relation to Biological, Technical and Environmental Factors

Directory of Open Access Journals (Sweden)

Sara Lombardo

2009-12-01

Full Text Available In Italy, globe artichoke production is prevailingly concentrated in the South and islands, where it provides an important contribution to the agricultural economy. In recent years, there has been a renewed interest in this crop as a promising source of polyphenols, a heterogeneous class of secondary metabolites characterized by various healthy properties well-documented in literature. The phenolic fraction, present in the different artichoke plant parts, varies widely in relation to biotic and abiotic factors. Therefore, the present study aimed at evaluating the variation of phenolic content in globe artichoke in relation to biological, technical and environmental factors. Two field-experiments were carried out in Sicily (South Italy in two representative cultivation areas, in order to examine the effects of genotype, head fraction, season conditions, planting density and arrangement on the globe artichoke phenolic concentration. Both the total polyphenols and the individual phenolic compounds detected were notably genotype- dependent. Particularly, the high level of caffeoylquinic acids (chlorogenic acid, among others and apigenin 7- O-glucuronide, reported respectively by “Violetto di Sicilia” and “Romanesco clone C3”, could be used to encourage globe artichoke fresh consumption. Total polyphenols content also resulted more abundant in specific accumulation sites within the inflorescence, such as the floral stem and receptacle, and for most of genotypes it decreased during the second year in response to the different meteorological conditions. Additionally, total polyphenols content significantly and linearly increased as plant density increased from 1.0 to 1.8 plant m-2 and it significantly increased by 13% passing from single to twin rows plant arrangement.

Variation of Phenolic Content in Globe Artichoke in Relation to Biological, Technical and Environmental Factors

Directory of Open Access Journals (Sweden)

Giovanni Mauromicale

2011-02-01

Full Text Available In Italy, globe artichoke production is prevailingly concentrated in the South and islands, where it provides an important contribution to the agricultural economy. In recent years, there has been a renewed interest in this crop as a promising source of polyphenols, a heterogeneous class of secondary metabolites characterized by various healthy properties well-documented in literature. The phenolic fraction, present in the different artichoke plant parts, varies widely in relation to biotic and abiotic factors. Therefore, the present study aimed at evaluating the variation of phenolic content in globe artichoke in relation to biological, technical and environmental factors. Two field-experiments were carried out in Sicily (South Italy in two representative cultivation areas, in order to examine the effects of genotype, head fraction, season conditions, planting density and arrangement on the globe artichoke phenolic concentration. Both the total polyphenols and the individual phenolic compounds detected were notably genotype- dependent. Particularly, the high level of caffeoylquinic acids (chlorogenic acid, among others and apigenin 7- O-glucuronide, reported respectively by “Violetto di Sicilia” and “Romanesco clone C3”, could be used to encourage globe artichoke fresh consumption. Total polyphenols content also resulted more abundant in specific accumulation sites within the inflorescence, such as the floral stem and receptacle, and for most of genotypes it decreased during the second year in response to the different meteorological conditions. Additionally, total polyphenols content significantly and linearly increased as plant density increased from 1.0 to 1.8 plant m-2 and it significantly increased by 13% passing from single to twin rows plant arrangement.

A Quantal Response Statistical Equilibrium Model of Induced Technical Change in an Interactive Factor Market: Firm-Level Evidence in the EU Economies

Directory of Open Access Journals (Sweden)

Jangho Yang

2018-02-01

Full Text Available This paper studies the pattern of technical change at the firm level by applying and extending the Quantal Response Statistical Equilibrium model (QRSE. The model assumes that a large number of cost minimizing firms decide whether to adopt a new technology based on the potential rate of cost reduction. The firm in the model is assumed to have a limited capacity to process market signals so there is a positive degree of uncertainty in adopting a new technology. The adoption decision by the firm, in turn, makes an impact on the whole market through changes in the factor-price ratio. The equilibrium distribution of the model is a unimodal probability distribution with four parameters, which is qualitatively different from the Walrasian notion of equilibrium in so far as the state of equilibrium is not a single state but a probability distribution of multiple states. This paper applies Bayesian inference to estimate the unknown parameters of the model using the firm-level data of seven advanced OECD countries over eight years and shows that the mentioned equilibrium distribution from the model can satisfactorily recover the observed pattern of technical change.

Technical assistance and the transfer of remote sensing technology. [for economic development

Science.gov (United States)

Chipman, R.

1977-01-01

The transfer of technology from industrialized countries to the third world is a very complicated process and one that requires a great deal of research and development. The political and social obstacles to this transfer are generally greater than the technical obstacles, but technical assistance programs have neither the competence nor the inclination to deal with these factors adequately. Funding for technical assistance in remote sensing is now expanding rapidly, and there is a growing need for institutions to study and promote the effective use of this technology for economic development. The United Nations, the Food and Agriculture Organization, the World Bank, the United States Agency for International Development and the Canadian technical assistance agencies take different approaches to the problem and deal with the political pressures in different ways.

Personal health records in the South African healthcare landscape: a socio-technical analysis

CSIR Research Space (South Africa)

Mxoli, A

2014-11-01

Full Text Available and control non-communicable lifestyle diseases. Despite numerous benefits adoption rates are low, and little is known regarding the factors that affect adoption in the South African context. This exploratory paper highlights socio-technical factors that can...

Technical and economic limits to fuel burnup extension. Proceedings of a technical committee meeting

International Nuclear Information System (INIS)

2002-07-01

For many years, the increase of efficiency in the production of nuclear electricity has been an economic challenge in many countries which have developed this kind of energy. The increase of fuel burnup leads to a reduction in the volume of spent fuel discharged to longer fuel cycles in the reactor, which means bigger availability and capacity factors. After having increased the authorized burnup in plants, developing new alloys capable of resisting high burnup, and having accumulated data on fuel evolution with burnup, it has become necessary to establish the limitations which could be imposed by the physical evolution of the fuel, influencing fuel management, neutron properties, reprocessing or, more generally, the management of waste and irradiated fuels. It is also necessary to verify whether the benefits of lower electricity costs would not be offset by an increase in fuel management costs. The main questions are: Are technical and economic limits to the increasing of fuel burnup in parallel? Can we envisage nowadays the hardest limitation in some of these areas? Which are the main points to be solved from the technical point of view? Is this effort worthwhile considering the economy of the cycle? To which extent? For these reasons, the IAEA, following a recommendation by the International Working Group on Fuel Performance and Technology, held a Technical Committee Meeting on Technical and Economic Limits to Fuel Burnup Extension. The purpose of this meeting was to provide an international forum to review the evolution of fuel properties at increased burnup in order to estimate the limitations both from a physical and an economic point of view. The meeting was therefore divided into two parts. The first part, focusing on technical limits, was devoted to the improvement of the fuel element, such as fission gas release (FGR), RIM effect, cladding, etc. and the fabrication, core management, spent fuel and reprocessing. Eighteen related papers were presented which

Air Emissions Factors and Quantification

Science.gov (United States)

Emissions factors are used in developing air emissions inventories for air quality management decisions and in developing emissions control strategies. This area provides technical information on and support for the use of emissions factors.

Training of technical staff and technical staff managers

International Nuclear Information System (INIS)

Moody, G.F.

1991-01-01

The purpose of Technical Staff and Technical Staff Managers training is to provide job skills enhancement to individuals selected to fill key technical positions within a nuclear utility. This training is unique in that unlike other training programs accredited by the National Academy for Nuclear Training, it does not lead to specific task qualification. The problems encountered when determining the student population and curriculum are a direct result of this major difference. Major problems encountered are determining who should attend the training, what amount of training is necessary and sufficient, and how to obtain the best feedback in order to effect substantive program improvements. These topics will be explored and possible solutions discussed

Technical Network

CERN Multimedia

2007-01-01

In order to optimise the management of the Technical Network (TN), to facilitate understanding of the purpose of devices connected to the TN and to improve security incident handling, the Technical Network Administrators and the CNIC WG have asked IT/CS to verify the "description" and "tag" fields of devices connected to the TN. Therefore, persons responsible for systems connected to the TN will receive e-mails from IT/CS asking them to add the corresponding information in the network database at "network-cern-ch". Thank you very much for your cooperation. The Technical Network Administrators & the CNIC WG

Technical-Induced Hemolysis in Patients with Respiratory Failure Supported with Veno-Venous ECMO - Prevalence and Risk Factors.

Directory of Open Access Journals (Sweden)

Karla Lehle

Full Text Available The aim of the study was to explore the prevalence and risk factors for technical-induced hemolysis in adults supported with veno-venous extracorporeal membrane oxygenation (vvECMO and to analyze the effect of hemolytic episodes on outcome. This was a retrospective, single-center study that included 318 adult patients (Regensburg ECMO Registry, 2009-2014 with acute respiratory failure treated with different modern miniaturized ECMO systems. Free plasma hemoglobin (fHb was used as indicator for hemolysis. Throughout a cumulative support duration of 4,142 days on ECMO only 1.7% of the fHb levels were above a critical value of 500 mg/l. A grave rise in fHb indicated pumphead thrombosis (n = 8, while acute oxygenator thrombosis (n = 15 did not affect fHb. Replacement of the pumphead normalized fHb within two days. Neither pump or cannula type nor duration on the first system was associated with hemolysis. Multiple trauma, need for kidney replacement therapy, increased daily red blood cell transfusion requirements, and high blood flow (3.0-4.5 L/min through small-sized cannulas significantly resulted in augmented blood cell trauma. Survivors were characterized by lower peak levels of fHb [90 (60, 142 mg/l] in comparison to non-survivors [148 (91, 256 mg/l, p≤0.001]. In conclusion, marked hemolysis is not common in vvECMO with modern devices. Clinically obvious hemolysis often is caused by pumphead thrombosis. High flow velocity through small cannulas may also cause technical-induced hemolysis. In patients who developed lung failure due to trauma, fHb was elevated independantly of ECMO. In our cohort, the occurance of hemolysis was associated with increased mortality.

Technical issues of electric nanopulse contact lithotripsy as factors affecting lithotripsy effectiveness and probe resourses

Directory of Open Access Journals (Sweden)

L. Yu. Ivanova

2012-01-01

Full Text Available To assess the relationship of main technical issues of electric nanopulse contact lithotripsy (CLT with lithotripsy effectiveness and lithotripsy resources of probe.Electric nanopulses were transmitted by the flexible probes and the lithotripter «Urolit». The relationship between lithotripsy effectiveness and tip diameter of probes, pulse energy, pulse frequency was assessed, and resources of lithotripsy probes with different diameters of the tip were analyzed.Sufficient number of electric nanopulse to destroy stone models was less when tip diameter, nanopulse energy and frequency were greater.Effectiveness of electric nanopulse CLT can be enhanced with the increase of nanopulse energy, frequency and probe diameter. Complex correction of technical issues of electric nanopulse CLT can be a way of probe resources saving.

TECHNICAL COORDINATION

CERN Multimedia

A. Ball

2010-01-01

Operational Experience At the end of the first full-year running period of LHC, CMS is established as a reliable, robust and mature experiment. In particular common systems and infrastructure faults accounted for <0.6 % CMS downtime during LHC pp physics. Technical operation throughout the entire year was rather smooth, the main faults requiring UXC access being sub-detector power systems and rack-cooling turbines. All such problems were corrected during scheduled technical stops, in the shadow of tunnel access needed by the LHC, or in negotiated accesses or access extensions. Nevertheless, the number of necessary accesses to the UXC averaged more than one per week and the technical stops were inevitably packed with work packages, typically 30 being executed within a few days, placing a high load on the coordination and area management teams. It is an appropriate moment for CMS Technical Coordination to thank all those in many CERN departments and in the Collaboration, who were involved in CMS techni...

Estimation of farm level technical efficiency and its determinants ...

African Journals Online (AJOL)

With the difficulties encountered by the farmers in adopting improved technologies, increasing resource use efficiency has become a very significant factor in increasing productivity. Therefore, this study was designed to estimate the farm level technical efficiency and its determinants among male and female sweet potato ...

A socio-technical analysis of work with ideas in NPD: an industrial case study

DEFF Research Database (Denmark)

Gish, Liv; Hansen, Claus Thorp

2013-01-01

on piecing together a number of ideas that were developed and disseminated in a large industrial company. We do this through an in-depth case study of the development of the energy-labeled circulation pump Alpha Pro, developed by one of the world’s leading pump manufacturers, Grundfos. Using a socio-technical...... approach, we focus especially on the actors involved and the contextual factors, and less on the detailed development of technical ideas. In our study, we observe that (1) ideas are pieced together from previous ideas and results; (2) ideas are implemented through continuous mobilization of support...... and development of legitimate arguments; and (3) idea work is also a socio-technical process, because contextual factors matter. We observe that idea work is an ongoing process undertaken across different projects, actors, departments, strategies, and visions within Grundfos, while also involving external actors...

Worker Characteristics moderate the Impact of Socio - technical Workplace Interventions on Job Satisfaction

OpenAIRE

Mörtl, Peter; Schafler, Marlene; Lacueva-Pérez, Francisco José

2017-01-01

Workers’ job satisfaction is considered a critical indicator for the effectiveness of socio-technical interventions in the work place. However, job satisfaction represents a complex psychological phenomenon with many contributing factors that can be difficult to assess. To facilitate assessments of job satisfaction we review psychological theories and metrics of job satisfaction to investigate implications for socio-technical interventions. The findings suggest that the design and introductio...

Technical structure of the global nanoscience and nanotechnology literature

Energy Technology Data Exchange (ETDEWEB)

Kostoff, Ronald N., E-mail: kostofr@onr.navy.mil; Koytcheff, Raymond G. [Office of Naval Research (United States); Lau, Clifford G. Y. [Institute for Defense Analyses (United States)

2007-10-15

Text mining was used to extract technical intelligence from the open source global nanotechnology and nanoscience research literature. An extensive nanotechnology/nanoscience-focused query was applied to the Science Citation Index/Social Science Citation Index (SCI/SSCI) databases. The nanotechnology/nanoscience research literature technical structure (taxonomy) was obtained using computational linguistics/document clustering and factor analysis. The infrastructure (prolific authors, key journals/institutions/countries, most cited authors/journals/documents) for each of the clusters generated by the document clustering algorithm was obtained using bibliometrics. Another novel addition was the use of phrase auto-correlation maps to show technical thrust areas based on phrase co-occurrence in Abstracts, and the use of phrase-phrase cross-correlation maps to show technical thrust areas based on phrase relations due to the sharing of common co-occurring phrases. The {approx}400 most cited nanotechnology papers since 1991 were grouped, and their characteristics generated. Whereas the main analysis provided technical thrusts of all nanotechnology papers retrieved, analysis of the most cited papers allowed their characteristics to be displayed. Finally, most cited papers from selected time periods were extracted, along with all publications from those time periods, and the institutions and countries were compared based on their representation in the most cited documents list relative to their representation in the most publications list.

Technical structure of the global nanoscience and nanotechnology literature

International Nuclear Information System (INIS)

Kostoff, Ronald N.; Koytcheff, Raymond G.; Lau, Clifford G. Y.

2007-01-01

Text mining was used to extract technical intelligence from the open source global nanotechnology and nanoscience research literature. An extensive nanotechnology/nanoscience-focused query was applied to the Science Citation Index/Social Science Citation Index (SCI/SSCI) databases. The nanotechnology/nanoscience research literature technical structure (taxonomy) was obtained using computational linguistics/document clustering and factor analysis. The infrastructure (prolific authors, key journals/institutions/countries, most cited authors/journals/documents) for each of the clusters generated by the document clustering algorithm was obtained using bibliometrics. Another novel addition was the use of phrase auto-correlation maps to show technical thrust areas based on phrase co-occurrence in Abstracts, and the use of phrase-phrase cross-correlation maps to show technical thrust areas based on phrase relations due to the sharing of common co-occurring phrases. The ∼400 most cited nanotechnology papers since 1991 were grouped, and their characteristics generated. Whereas the main analysis provided technical thrusts of all nanotechnology papers retrieved, analysis of the most cited papers allowed their characteristics to be displayed. Finally, most cited papers from selected time periods were extracted, along with all publications from those time periods, and the institutions and countries were compared based on their representation in the most cited documents list relative to their representation in the most publications list

Research on the industry environmental total factor productivity in Jiangsu Province based on the SBM-SML

Science.gov (United States)

Lingfang, Sun; Han, Wang; Jian, Gong

2017-03-01

This paper uses the SBM-SML to measure the industry environmental total factor productivity in Jiangsu province of its 13 cities during 2005-2014 with SO2 emissions as the undesirable output, and discomposes the total factor productivity into the pure technical efficiency, the scale efficiency change, the pure technical change and the scale technical change. The research shows that the overall trend of the industry environmental total factor productivity is increasing in Jiangsu province during 2005-2014, the technical change is a main reason pushing up growth rates of economy, and the pure technical change is the intrinsic motivation of the technical change.Introduction.

Descriptive analysis of context evaluation instrument for technical oral presentation skills evaluation: A case study in English technical communication course

Science.gov (United States)

Mohamed, Abdullah-Adnan; Asmawi, Adelina; Hamid, Mohd Rashid Ab; Mustafa, Zainol bin

2015-02-01

This paper reports a pilot study of Context Evaluation using a self-developed questionnaire distributed among engineering undergraduates at a university under study. The study aims to validate the self-developed questionnaires used in the Context evaluation, a component in the CIPP Model. The Context evaluation assesses background information for needs, assets, problems and opportunities relevant to beneficiaries of the study in a defined environment. Through the questionnaire, background information for the assessment of needs, assets and problems related to the engineering undergraduates' perceptions on the teaching and learning of technical oral presentation skills was collected and analysed. The questionnaire was developed using 5-points Likert scale to measure the constructs under study. They were distributed to 100 respondents with 79 returned. The respondents consisted of engineering undergraduates studied at various faculties at one technical university in Malaysia. The descriptive analysis of data for each item which makes up the construct for Context evaluation is found to be high. This implied that engineering undergraduates showed high interest in teaching and learning of technical oral presentation skills, thus their needs are met. Also, they agreed that assets and facilities are conducive to their learning. In conclusion, the context evaluation involving needs and assets factors are both considerably important; their needs are met and the assets and facilities do support their technical oral presentation skills learning experience.

Handbook of Technical Communication

OpenAIRE

Mehler , Alexander; Romary , Laurent; Gibbon , Dafydd

2012-01-01

International audience; The handbook "Technical Communication" brings together a variety of topics which range from the role of technical media in human communication to the linguistic, multimodal enhancement of present-day technologies. It covers the area of computer-mediated text, voice and multimedia communication as well as of technical documentation. In doing so, the handbook takes professional and private communication into account. Special emphasis is put on technical communication bas...

Re-Innovating. Technological research contribution in the recovery of Our Lady of Mercy Church in Baranzate

Directory of Open Access Journals (Sweden)

Anna Mangiarotti

2011-04-01

Full Text Available The recovery project of Our Lady of Mercy Church in Baranzate, by Angelo Mangiarotti and Bruno Morassutti, with Aldo Favini for structures, built in 1956, and now in charge by Giulio Barazzetta, Anna Mangiarotti, Ingrid Paoletti, Tito Neri for structures and Giancarlo Chiesa for hvac, has requested a high technological effort in order to identify the technical options in order to ‘re-innovate’ on this building. The aim is to increase performances and internal comfort, while maintaining the original concept of the church. The deteriorated envelope will be changed with a façade envelope in steel dry assembled and a triple glazed unit high performance and with face fritted surfaced in order to reproduce the original architectural effects. Thanks to hvac, performances are radically improved.

Expressive/Exploratory Technical Writing (XTW) in Engineering: Shifting the Technical Writing Curriculum

Science.gov (United States)

Warnock, Scott; Kahn, Michael

2007-01-01

While the importance of "expressive writing," or informal, self-directed writing, has been well established, teachers underutilize it, particularly in technical writing courses. We introduce the term expressive/exploratory technical writing (XTW), which is the use of informal, self-directed writing to problem-solve in technical fields. We describe…

Determinants of Entrepreneurial Intentions: Technical-Vocational Education and Training Students in Ethiopia

Science.gov (United States)

Buli, Bereket Mamo; Yesuf, Wasihun Mohammed

2015-01-01

Purpose: The purpose of this paper is to examine factors that could explain the difference in entrepreneurial intention (EI) among technical-vocational education and training (TVET) program students. Centered on the theory of planned behavior (TPB), the paper aims to contribute to the understanding of factors that affect EIs of students and offer…

The fluctuations of China’s energy intensity: Biased technical change

International Nuclear Information System (INIS)

Wang, Ce; Liao, Hua; Pan, Su-Yan; Zhao, Lu-Tao; Wei, Yi-Ming

2014-01-01

change, decomposition results are sensitive to the level of biased technical change; the level of biased technical change can be determined by the difference in the change rate of total factor productivity and energy efficiency

Technical responsibilities in low-level waste disposal

International Nuclear Information System (INIS)

Murray, R.L.; Walker, C.K.

1989-01-01

North Carolina will be the host state for a low-level radioactive waste (LLRW) disposal facility serving the Southeast Compact for 20 yr beginning in 1993. Primary responsibility for the project rests with the North Carolina Low-Level Radioactive Waste Management Authority, a citizen board. The North Carolina project embodies a unique combination of factors that places the authority in a position to exercise technical leadership in the LLRW disposal field. First, the Southeast Compact is the largest in the United States in terms of area, population, and waste generation. second, it is in a humid rather than an arid region. Third, the citizens of the state are intensely interested in preserving life style, environment, and attractiveness of the region to tourists and are especially sensitive to the presence of waste facilities of any kind. Finally, disposal rules set by the Radiation Protection Commission and enforced by the Radiation Protection Section are stricter than the U.S. Nuclear Regulatory Commission's 10CFR61. These four factors support the authority's belief that development of the facility cannot be based solely on engineering and economics, but that social factors, including perceptions of human risk, concerns for the environment, and opinions about the desirability of hosting a facility, should be integral to the project. This philosophy guides the project's many technical aspects, including site selection, site characterization, technology selection and facility design, performance assessment modeling, and waste reduction policies. Each aspect presents its own unique problems

Combining technical and organisational elements in layer of protection analysis

NARCIS (Netherlands)

Boers, M.N.; Gort, J.; Versloot, N.H.A.

2005-01-01

Traditionally, in process industry, risks are reduced with technical solutions and organisational measures. The performance of both types of "solutions" depends on many factors and can not easily be compared. Especially the effectiveness of organisational measures such as the use of procedures,

Technical rules in law

Energy Technology Data Exchange (ETDEWEB)

Debelius, J

1978-08-01

An important source of knowledge for technical experts is the state of the art reflected by catalogues of technical rules. Technical rules may also achieve importance in law due to a legal transformation standard. Here, rigid and flexible reference are controversial with regard to their admissibility from the point of view of constitutional law. In case of a divergence from the generally accepted technical rules, it is assumed - refutably - that the necessary care had not been taken. Technical rules are one out of several sources of information; they have no normative effect. This may result in a duty of anyone applying them to review the state of technology himself.

Technical rules in law

International Nuclear Information System (INIS)

Debelius, J.

1978-01-01

An important source of knowledge for technical experts is the state of the art reflected by catalogues of technical rules. Technical rules may also achieve importance in law due to a legal transformation standard. Here, rigid and flexible reference are controversial with regard to their admissibility from the point of view of constitutional law. In case of a divergence from the generally accepted technical rules, it is assumed - refutably - that the necessary care had not been taken. Technical rules are one out of several sources of information; they have no normative effect. This may result in a duty of anyone applying them to review the state of technology himself. (orig.) [de

TECHNICAL COORDINATION

CERN Multimedia

A. Ball

2010-01-01

Operational Experience Since the closure of the detector in February, the technical operation of CMS has been quite smooth and reliable. Some minor interventions in UXC were required to cure failures of power supplies, fans, readout boards and rack cooling connections, but all these failures were repaired in scheduled technical stops or parasitically during access dedicated to fixing LHC technical problems. The only occasion when CMS had to request an access between fills was to search for the source of an alarm from the leak-detection cables mounted in the DT racks. After a few minutes of diagnostic search, a leaking air-purge was found. Replacement was complete within 2 hours. This incident demonstrated once more the value of these leak detection cables; the system will be further extended (during the end of year technical stop) to cover more racks in UXC and the floor beneath the detector. The magnet has also been operating reliably and reacted correctly to the 14s power cut on 29 May (see below). In or...

Improved technical efficiency and exogenous factors in transportation demand for energy: An application of structural time series analysis to South Korean data

International Nuclear Information System (INIS)

Sa'ad, Suleiman

2010-01-01

This paper stresses the importance of incorporating the effects of improved technical efficiency and exogenous factors when estimating energy demand functions. Using annual time series data for the period 1973-2007 in the STSM (structural time series model) developed by Harvey et al. the paper estimates price and income elasticities of demand for energy as well as the annual growth of the stochastic trend at the end of the estimation period. The results of the study reveal a long-run income elasticity of 1.37 and a price elasticity of -0.19. In addition, the underlying trend is generally stochastic and negatively sloping during the greater part of the estimation period. Finally, the estimated result from the structural time series is compared with the results from the Johansen Cointegration. These results suggest that income is the dominant factor in energy consumption. In addition, the coefficient of linear trend is negative, supporting the results from the STSM.

Improved technical efficiency and exogenous factors in transportation demand for energy: An application of structural time series analysis to South Korean data

Energy Technology Data Exchange (ETDEWEB)

Sa' ad, Suleiman [Surrey Centre for Energy Economics (SEEC), University of Surrey, Guildford (United Kingdom)

2010-07-15

This paper stresses the importance of incorporating the effects of improved technical efficiency and exogenous factors when estimating energy demand functions. Using annual time series data for the period 1973-2007 in the STSM (structural time series model) developed by Harvey et al. the paper estimates price and income elasticities of demand for energy as well as the annual growth of the stochastic trend at the end of the estimation period. The results of the study reveal a long-run income elasticity of 1.37 and a price elasticity of -0.19. In addition, the underlying trend is generally stochastic and negatively sloping during the greater part of the estimation period. Finally, the estimated result from the structural time series is compared with the results from the Johansen Cointegration. These results suggest that income is the dominant factor in energy consumption. In addition, the coefficient of linear trend is negative, supporting the results from the STSM. (author)

The power of a collaborative relationship between technical assistance providers and community prevention teams: A correlational and longitudinal study.

Science.gov (United States)

Chilenski, Sarah M; Perkins, Daniel F; Olson, Jonathan; Hoffman, Lesa; Feinberg, Mark E; Greenberg, Mark; Welsh, Janet; Crowley, D Max; Spoth, Richard

2016-02-01

Historically, effectiveness of community collaborative prevention efforts has been mixed. Consequently, research has been undertaken to better understand the factors that support their effectiveness; theory and some related empirical research suggests that the provision of technical assistance is one important supporting factor. The current study examines one aspect of technical assistance that may be important in supporting coalition effectiveness, the collaborative relationship between the technical assistance provider and site lead implementer. Four and one-half years of data were collected from technical assistance providers and prevention team members from the 14 community prevention teams involved in the PROSPER project. Spearman correlation analyses with longitudinal data show that the levels of the collaborative relationship during one phase of collaborative team functioning associated with characteristics of internal team functioning in future phases. Results suggest that community collaborative prevention work should consider the collaborative nature of the technical assistance provider - prevention community team relationship when designing and conducting technical assistance activities, and it may be important to continually assess these dynamics to support high quality implementation. Copyright © 2015 Elsevier Ltd. All rights reserved.

Improving technical information use: what can be learnt from a manager's perspective?

Science.gov (United States)

Jacobson, C; Lisle, A; Carter, R W; Hockings, M T

2013-07-01

Conservation practice reportedly suffers from low use of technical information. Understanding of factors that affect the influence of technical information on management decision-making is limited. We sought to identify leverage points for improved technical information dissemination in the New South Wales Parks and Wildlife Service, Australia, given the significant recent investments in monitoring and evaluation that had been made. We did so by exploring the inter-relationships between factors affecting the influence of different information types on management decisions. Results indicate that managers have a high inclination toward adaptive behavior, given they operate in an information poor environment. The most influential types of information were those that enabled interaction between information provider and recipient (e.g., staff experience and expertise). An analysis of the concordance in individuals' responses for different information types showed that neither accessibility nor organizational expectation of use was aligned with influence on decision-making. Alignment of responses also varied by work area. Raising expectations of information use or increasing access to particular types of information is therefore unlikely to result in an increase in influence on management decision-making. Rather than focussing on matching accessibility and expected use of particular information types, our results indicate that technical information uptake is best supported through existing peer networks tailored to specific work areas.

Methodology for technical risk assessment

International Nuclear Information System (INIS)

Waganer, L.M.; Zuckerman, D.S.

1983-01-01

A methodology has been developed for and applied to the assessment of the technical risks associated with an evolving technology. This methodology, originally developed for fusion by K. W. Billman and F. R. Scott at EPRI, has been applied to assess the technical risk of a fuel system for a fusion reactor. Technical risk is defined as the risk that a particular technology or component which is currently under development will not achieve a set of required technical specifications (i.e. probability of failure). The individual steps in the technical risk assessment are summarized. The first step in this methodology is to clearly and completely quantify the technical requirements for the particular system being examined. The next step is to identify and define subsystems and various options which appear capable of achieving the required technical performance. The subsystem options are then characterized regarding subsystem functions, interface requirements with the subsystems and systems, important components, developmental obstacles and technical limitations. Key technical subsystem performance parameters are identified which directly or indirectly relate to the system technical specifications. Past, existing and future technical performance data from subsystem experts are obtained by using a Bayesian Interrogation technique. The input data is solicited in the form of probability functions. Thus the output performance of the system is expressed as probability functions

Entrepreneurial Attitude and Entrepreneurial Efficacy of Technical Secondary School Students

Science.gov (United States)

Zaidatol Akmaliah, Lope Pihie; Bagheri, Afsaneh

2010-01-01

Entrepreneurial attitude and entrepreneurial efficacy are considered to be two important factors influencing students' intention and success in becoming entrepreneurs. This study was conducted to determine the entrepreneurial attitude and entrepreneurial efficacy of 3000 students following technical subjects in the secondary schools of Malaysia.…

Economic and environmental consequences of technical and institutional change in Dutch dairy farming.

NARCIS (Netherlands)

Berentsen, P.B.M.; Giesen, G.W.J.; Renkema, J.A.

1997-01-01

A linear programming model of a dairy farm was used to explore the future for different types of Dutch dairy farms under different scenarios. The scenarios are consistent sets of changing factors that are considered external at farm level. The factors included are technical, such as efficiency of

Technical report writing

Science.gov (United States)

Vidoli, Carol A.

1992-01-01

This manual covers the fundamentals of organizing, writing, and reviewing NASA technical reports. It was written to improve the writing skills of LeRC technical authors and the overall quality of their reports.

Encouraging Enrolments by People's Influence; A desperate need for Technical Education Evolution

OpenAIRE

Mahajan, Prashant; Golahit, Suresh

2017-01-01

International audience; — There is a rapid growth of technical education in last decade in terms of the no. of institutes and intake capacity in India but with improper and non-directional development. As per AICTE reports, there is noticeable gap in between the actual no. of enrolments and intake capacity of these institutes. In the year 2015-16, 46% of seats were vacant in Technical Education in India. Segmentation and 'People' factor of service mix is very important aspects in education se...

VANDAL technical overview

International Nuclear Information System (INIS)

Unsworth, M.D.

1989-07-01

This document is concerned with the technicalities of the VANDAL code and covers the technical details of each of the systems modules in turn. Covered are SAMPLING, FLOW, VAULT, GEOSPHERE, BIOSPHERE and TIMESTEPPING. (author)

Socio-technical Betwixtness

DEFF Research Database (Denmark)

Bossen, Claus

2017-01-01

the intrinsically social and technical interwovenness of design, and the necessity of including affected people and stakeholders in the design process. This betwixtness of socio-technical design is demonstrated by the analysis of two IT systems for healthcare: a foundational model for electronic healthcare records......This chapter focusses on two challenges for socio-technical design: Having to choose between different rationales for design, and the adequate understanding and depiction of the work to be redesigned. These two challenges betwixt the otherwise strong tenets of socio-technical design of pointing out......, and an IT system organizing hospital porters’ work. The conceptual background for the analysis of the cases is provided by a short introduction to different rationales for organizational design, and by pointing to the differences between a linear, rationalistic versus an interactional depiction of work....

Exploring the relationship between anaesthesiologists' non-technical and technical skills

DEFF Research Database (Denmark)

Gjeraa, K; Jepsen, R M H G; Rewers, M

2016-01-01

BACKGROUND: A combination of non-technical skills (NTS) and technical skills (TS) is crucial for anaesthetic patient management. However, a deeper understanding of the relationship between these two skills remains to be explored. We investigated the characteristics of trainee anaesthesiologists...... the customised version of the Anaesthetists' Non-Technical Skills System, ANTSdk, and an adapted TS checklist for calculating the correlation between NTS and TS. Written descriptions of the observed NTS were analysed using directed content analysis. RESULTS: The correlation between the NTS and the TS ratings......, concrete NTS were developed to aid the understanding, training and use of NTS....

Suggested technical scheme to help resolve regulatory issues

Energy Technology Data Exchange (ETDEWEB)

Harvey, T.

1978-07-01

A management-planning model envisioned as a useful tool for planning and guiding the development of a nuclear waste repository data base is described. It incorporates the technical assessment goals and objectives of the US Nuclear Regulatory Commission, and it provides a strategy for reaching them. The model strategy includes provisions for the breadth, timeliness, and defensibility of its predictions. Consideration is given to observational data, its structure, and future refinements. The structure of the data is consistent with the needs of a systems model whose structure is proposed to resolve questions about repository safety. Uncertainties are categorized as an aid in defining and resolving technical issues. The model provides a framework for ultimately exposing all the sensitive and controversial factors. Some quantitative aspects of data acquisition are presented. 12 figures.

Suggested technical scheme to help resolve regulatory issues

International Nuclear Information System (INIS)

Harvey, T.

1978-07-01

A management-planning model envisioned as a useful tool for planning and guiding the development of a nuclear waste repository data base is described. It incorporates the technical assessment goals and objectives of the US Nuclear Regulatory Commission, and it provides a strategy for reaching them. The model strategy includes provisions for the breadth, timeliness, and defensibility of its predictions. Consideration is given to observational data, its structure, and future refinements. The structure of the data is consistent with the needs of a systems model whose structure is proposed to resolve questions about repository safety. Uncertainties are categorized as an aid in defining and resolving technical issues. The model provides a framework for ultimately exposing all the sensitive and controversial factors. Some quantitative aspects of data acquisition are presented. 12 figures

Technical Agency in Practice

DEFF Research Database (Denmark)

Krummheuer, Antonia Lina

2015-01-01

) description of hybrid networks in which human and non-human actants are granted agency without differentiating different kinds of agency, EMCA focuses on the member's perspectives and the situated construction of technical agency that is made relevant within an ongoing interaction. Based on an EMCA analysis......The paper combines the discussion of technical agency and hybrid networks of Actor-Network Theory (ANT) with an ethnomethodological/conversation analytical (EMCA) perspective on situated practices in which participants ascribe agency to technical artefacts. While ANT works with (ethnographic...... of three video recordings of situations in which technical agency is made relevant by the human participants, the paper demonstrates different ways in which agency is granted to technical artefacts. Human participants can treat a technology as communication partner, as an active part (and actant...

Relationship between non-technical skills and technical performance during cardiopulmonary resuscitation: does stress have an influence?

Science.gov (United States)

Krage, Ralf; Zwaan, Laura; Tjon Soei Len, Lian; Kolenbrander, Mark W; van Groeningen, Dick; Loer, Stephan A; Wagner, Cordula; Schober, Patrick

2017-11-01

Non-technical skills, such as task management, leadership, situational awareness, communication and decision-making refer to cognitive, behavioural and social skills that contribute to safe and efficient team performance. The importance of these skills during cardiopulmonary resuscitation (CPR) is increasingly emphasised. Nonetheless, the relationship between non-technical skills and technical performance is poorly understood. We hypothesise that non-technical skills become increasingly important under stressful conditions when individuals are distracted from their tasks, and investigated the relationship between non-technical and technical skills under control conditions and when external stressors are present. In this simulator-based randomised cross-over study, 30 anaesthesiologists and anaesthesia residents from the VU University Medical Center, Amsterdam, the Netherlands, participated in two different CPR scenarios in random order. In one scenario, external stressors (radio noise and a distractive scripted family member) were added, while the other scenario without stressors served as control condition. Non-technical performance of the team leader and technical performance of the team were measured using the 'Anaesthetists' Non-technical Skill' score and a recently developed technical skills score. Analysis of variance and Pearson correlation coefficients were used for statistical analyses. Non-technical performance declined when external stressors were present (adjusted mean difference 3.9 points, 95% CI 2.4 to 5.5 points). A significant correlation between non-technical and technical performance scores was observed when external stressors were present (r=0.67, 95% CI 0.40 to 0.83, ptechnical performance score (task management, team working, situation awareness, decision-making). During CPR with external stressors, the team's technical performance is related to the non-technical skills of the team leader. This may have important implications for training of

Women’s Participation in Scientific and Technical Field in Malaysia

Directory of Open Access Journals (Sweden)

Nuraihan Mat Daud

1999-12-01

Full Text Available The scientific and technical fields are generally dominated by men. Women tend to shy away from using technical devices and from trying to understand the principles behind their operation. One of the major reasons for their seemingly lack of interest is the lack of encouragement from their family and society. This paper discusses the steps taken by a country, namely, Malaysia, to encourage its female population to venture into this area. Policies were created by the government for this purpose. Great emphasis is given on education, which is one of the important factors influencing one's choice of vocation. In its process of restructuring the society, the government has effectively increased the involvement of women particularly the Muslims in the professional and technical fields as the vast opportunities are provided for them to pursue their studies in this area. There is a marked increase in the number of female student intake in technical and vocational institutions. There is also an increase in the number of females in related fields such as accountancy, engineering, architecture and medicine. The ratio of male to female involvement has however not changed much when the figures are analysed.

Human factor analysis and preventive countermeasures in nuclear power plant

International Nuclear Information System (INIS)

Li Ye

2010-01-01

Based on the human error analysis theory and the characteristics of maintenance in a nuclear power plant, human factors of maintenance in NPP are divided into three different areas: human, technology, and organization. Which is defined as individual factors, including psychological factors, physiological characteristics, health status, level of knowledge and interpersonal skills; The technical factors including technology, equipment, tools, working order, etc.; The organizational factors including management, information exchange, education, working environment, team building and leadership management,etc The analysis found that organizational factors can directly or indirectly affect the behavior of staff and technical factors, is the most basic human error factor. Based on this nuclear power plant to reduce human error and measures the response. (authors)

Final Technical Report

Energy Technology Data Exchange (ETDEWEB)

Glasser, Alan H. [Fusion Theory and Computation Inc., Kingston, WA (United States)

2018-02-02

Final technical report on DE-SC0016106. This is the final technical report for a portion of the multi-institutional CEMM project. This report is centered around 3 publications and a seminar presentation, which have been submitted to E-Link.

Technical noise supplement : TeNS : a technical supplement to the Traffic Noise Analysis Protocol.

Science.gov (United States)

1998-10-01

The purpose of this Technical Noise Supplement (TeNS) is to provide technical background : information on transportation-related noise in general and highway traffic noise in : particular. It is designed to elaborate on technical concepts and procedu...

Communication campaign for the selecting of a technical undergraduate degree at the Salesian Polytechnic University

Directory of Open Access Journals (Sweden)

Adriana Priscila Vallejo

2016-08-01

Full Text Available This paper aims to make available to the scientific community, a communication campaign designed based on the factors involved in choosing a technical undergraduate degree at the Salesian Polytechnic University in Cuenca. Given the momentum that currently provided by the Ecuadorean government to technical and technological country institutes, must take measures to encourage the academic preparation of students opting not only for technical training but by engineering which ensures professionals that guarantee the rights stipulated in the Constitution of Ecuador and help boost the economy with innovation, research and entrepreneurship. The research is qualitative. It is based on focus groups and semi-structured interviews; its conceptual basis is defined by marketing approaches and public relations services; which means that the above factors constitute the main element for the development of a creative communicational approach to provide a more valuable study fields of the institution. 

Conversion of NEK standard technical specifications into improved technical specifications

International Nuclear Information System (INIS)

Glaser, B.

2003-01-01

Neck is currently using a standard format of operation's Technical Specifications - STS (based on NUREG-0452), which are planned to be converted into Improved Technical Specifications - ITS (based on NUREG-1431). To facilitate the development of individual ITS, each reactor vendor owners group (OG) and the NRC staff developed improved standard TS (ISTS). For Westinghouse plants, the ISTS are published as NUREG-1431, and this document is going to be the basis for the new NEK ITS. It has been recognized that nuclear safety in all plants would benefit from improvement and standardization of ITS, so this was also addressed and recognized by the NRC. There are several plants around Europe and US, which have replaced the format into ITS which brings a lot of improvements and practical value in operations. The main objective of conversion is to completely rewrite, reformat, and streamline the existing STS. Emphasis is placed on human factors principles to improve clarity and understanding. The Bases section will be significantly expanded to clarify and better explain the purpose and foundation of each specification. There might be some proposed changes to the existing STS that deviated from the ITS in NUREG-1431 and constitute a relaxation of the existing STS. Each of these additional proposed changes will be described and evaluated in amendment application and justified on a case-by-case basis. Since the NEK is going to operate for more than 20 year without considering life extension, such conversion will be beneficial for operation personnel as well as regulation, surveillance and focus on operation's safety. At the present, only preliminary plan of STS conversion exists, showing the time frame of approximately 2 years of conversion process and numerous tasks that need to be performed. The plan is to begin with process in year 2004 and finish project in 2006, which means use of new ITS in main control room in year 2007. Beside the main process of conversion, there are

Tank Waste Remediation System retrieval and disposal mission technical baseline summary description

International Nuclear Information System (INIS)

McLaughlin, T.J.

1998-01-01

This document is prepared in order to support the US Department of Energy's evaluation of readiness-to-proceed for the Waste Retrieval and Disposal Mission at the Hanford Site. The Waste Retrieval and Disposal Mission is one of three primary missions under the Tank Waste Remediation System (TWRS) Project. The other two include programs to characterize tank waste and to provide for safe storage of the waste while it awaits treatment and disposal. The Waste Retrieval and Disposal Mission includes the programs necessary to support tank waste retrieval, wastefeed, delivery, storage and disposal of immobilized waste, and closure of tank farms. This mission will enable the tank farms to be closed and turned over for final remediation. The Technical Baseline is defined as the set of science and engineering, equipment, facilities, materials, qualified staff, and enabling documentation needed to start up and complete the mission objectives. The primary purposes of this document are (1) to identify the important technical information and factors that should be used by contributors to the mission and (2) to serve as a basis for configuration management of the technical information and factors

Writing a technical note.

Science.gov (United States)

Ng, K H; Peh, W C G

2010-02-01

A technical note is a short article giving a brief description of a specific development, technique or procedure, or it may describe a modification of an existing technique, procedure or device applicable to medicine. The technique, procedure or device described should have practical value and should contribute to clinical diagnosis or management. It could also present a software tool, or an experimental or computational method. Technical notes are variously referred to as technical innovations or technical developments. The main criteria for publication will be the novelty of concepts involved, the validity of the technique and its potential for clinical applications.

Technical Elements (CCT1)

DEFF Research Database (Denmark)

Thomsen, Kirsten Engelund; Wittchen, Kim Bjarne

2017-01-01

Many of the aspects dealt with in the CA EPBD are closely interlinked with each other and may refer to both new and existing buildings, as well as to inspection and certification. This is also true for technical aspects, such as the calculation methodologies, and how to include technical systems......’ efficiency or how to integrate renewable energy within them. The central team for Technical Elements deals with issues of a technical nature, which are common to new and existing buildings, and/or with minimum demands, certification and inspection. This report focuses on the implementation of Articles 3, 4...

Engineering and Physics Optimization of Breed and Burn Fast Reactor Systems. NUCLEAR ENERGY RESEARCH INITIATIVE (NERI) QUARTERLY PROGRESS REPORT

International Nuclear Information System (INIS)

Pavel Hejzlar; Peter Yarsky; Mike Driscoll; Dan Wachs; Kevan Weaver; Ken Czerwinski; Mike Pope; James Parry; Marshall, Theron D.; Davis, Cliff B.; Dustin Crawford; Thomas Hartmann; Pradip Saha

2005-01-01

This project is organized under four major tasks (each of which has two or more subtasks) with contributions among the three collaborating organizations (MIT, INEEL and ANL-West): Task A: Core Physics and Fuel Cycle; Task B: Core Thermal Hydraulics; Task C: Plant Design; Task D: Fuel Design The lead PI, Michael J. Driscoll, has consolidated and summarized the technical progress submissions provided by the contributing investigators from all sites, under the above principal task headings

Engineering and Physics Optimization of Breed and Burn Fast Reactor Systems; NUCLEAR ENERGY RESEARCH INITIATIVE (NERI) QUARTERLY PROGRESS REPORT

Energy Technology Data Exchange (ETDEWEB)

ERROR, [value too long for type character varying(50); Hejzlar, Pavel; Yarsky, Peter; Driscoll, Mike; Wachs, Dan; Weaver, Kevan; Czerwinski, Ken; Pope, Mike; Parry, James; Marshall, Theron D.; Davis, Cliff B.; Crawford, Dustin; Hartmann, Thomas; Saha, Pradip

2005-01-31

This project is organized under four major tasks (each of which has two or more subtasks) with contributions among the three collaborating organizations (MIT, INEEL and ANL-West): Task A: Core Physics and Fuel Cycle; Task B: Core Thermal Hydraulics; Task C: Plant Design; Task D: Fuel Design The lead PI, Michael J. Driscoll, has consolidated and summarized the technical progress submissions provided by the contributing investigators from all sites, under the above principal task headings.

Opposition to the American leadership by Brazilian nurses (1934-1938 Resistencia al liderazgo norte-americano en la formación de la enfermera brasileña (1934-1938 Resistência à liderança norte-americana na formação da enfermeira brasileira (1934-1938

Directory of Open Access Journals (Sweden)

Tânia Cristina Franco Santos

2008-02-01

Full Text Available A historical social descriptive study whose objective is to describe the circumstances where Bertha Pullen assumes as the din of Anna Nery Nursing School, to assess the strategies undertaken by Pullen to assure her position of power and prestige in the space of the school and Brazilian nursing; and to discuss about the resistance to the presence and authority of the American din, for the nurses and students, in the struggle for a national identity. Corpus analysis was made by putting photographs into context base don written documents and secondary sources. Results: The second management of Pullen was the reiteration of the American presence in the leadership of the School, despite the resistance of the nurses and students. Thus, we may assume that the second tenure of Pullen did not represent a real need that was felt by the school.Estudio histórico-social que tuvo como objetivos: describir las circunstancias en las que Bertha Pullen asume la dirección de la Escuela de Enfermería Anna Nery; analizar las estrategias emprendidas por Pullen para asegurar su posición de poder y prestigio en la escuela y en la enfermería brasileña y discutir las oposiciones frente a su presencia y autoridad como directora americana por parte de las enfermeras y alumnas en la lucha por una identidad nacional. El análisis de los documentos fue a través de la contextualización de fotografías, con base en documentos y fuentes secundarios. El estudio demostró que la segunda gestión de Bertha Pullen reiteró la presencia americana dentro del liderazgo de la Escuela de Enfermería de Anna Nery, a pesar de la resistencia de las enfermeras y alumnas. De este modo, se concluye que su segunda gestión en la Escuela de Anna Nery no representó una necesidad real o sentida por la misma escuela.Estudo histórico-social teve como objetivos: descrever as circunstâncias em que Bertha Pullen assume a direção da Escola de Enfermagem Anna Nery; analisar as estrat

An Online Approach to Teaching International Outsourcing in Technical Communication Classes

Science.gov (United States)

St. Amant, Kirk

2005-01-01

The growth of international online access has given rise to a new production method--international outsourcing--that has important implications for technical communication practices. Successful interactions within international outsourcing require individuals to understand how cultural factors could affect online interactions. Today's technical…

Human factors of safety: a few landmarks

International Nuclear Information System (INIS)

Mosneron Dupin, F.

1992-06-01

This paper discusses factors to be taken into account, and methods to be used. It concludes that more realistic and positive conceptions of Human Factors should be developed, and that Human Factors should be addressed at the very beginning of any technical project

Towards technical interoperability in telemedicine.

Energy Technology Data Exchange (ETDEWEB)

Craft, Richard Layne, II

2004-05-01

For telemedicine to realize the vision of anywhere, anytime access to care, the question of how to create a fully interoperable technical infrastructure must be addressed. After briefly discussing how 'technical interoperability' compares with other types of interoperability being addressed in the telemedicine community today, this paper describes reasons for pursuing technical interoperability, presents a proposed framework for realizing technical interoperability, identifies key issues that will need to be addressed if technical interoperability is to be achieved, and suggests a course of action that the telemedicine community might follow to accomplish this goal.

The (Un)Attractiveness of Vocational and Technical Education: Theoretical Background

Science.gov (United States)

Lovšin, Miha

2014-01-01

This paper considers the problem of the lack of attractiveness of vocational and technical education via a review of legislation on counselling practices, implementing documents, and the social factors by means of which the education system can influence the individual's decision. It is apparent that legislation regulating the organisation and…

Development and characterization of new high-level waste form containing LiCl KCl eutectic salts for achieving waste minimization from pyroprocessing

International Nuclear Information System (INIS)

Cho, Yong Zun; Kim, In Tae; Park, Hwan Seo; Ahn, Byeung Gil; Eun, Hee Chul; Son, Seock Mo; Ah, Su Na

2011-12-01

The purpose of this project is to develop new high level waste (HLW) forms and fabrication processes to dispose of active metal fission products that are removed from electrorefiner salts in the pyroprocessing based fuel cycle. The current technology for disposing of active metal fission products in pyroprocessing involves non selectively discarding of fission product loaded salt in a glass-bonded sodalite ceramic waste form. Selective removal of fission products from the molten salt would greatly minimize the amount of HLW generated and methods were developed to achieve selective separation of fission products during a previous I NERI research project (I NERI 2006 002 K). This I NERI project proceeds from the previous project with the development of suitable waste forms to immobilize the separated fission products. The Korea Atomic Energy Research Institute (KAERI) has focused primarily on developing these waste forms using surrogate waste materials, while the Idaho National Laboratory (INL) has demonstrated fabrication of these waste forms using radioactive electrorefiner salts in hot cell facilities available at INL. Testing and characterization of these radioactive materials was also performed to determine the physical, chemical, and durability properties of the waste forms

Safety assessment of the disposal of sealed radiation sources in boreholes

International Nuclear Information System (INIS)

Oliveira, Rosana Lagua de; Vicente, Roberto; Hiromoto, Goro

2009-01-01

The Radioactive Waste Management Laboratory (RNML) at the Nuclear Energy Research Institute (NERI) in Sao Paulo, Brazil, is developing the concept of a repository for disused sealed radiation sources in a deep borehole. Several thousands disused sealed radiation sources are stored at NERI awaiting the decision on final disposal and tens of thousands are still under the possession of the licensees. A significant fraction of these sources are long-lived and will require final disposal in a geological repository. The purpose of this paper is to identify and discuss suitable safety assessment strategies for the repository concept and to illustrate a rational approach for a long-term safety assessment methodology. (author)

Two-factor authentication

CERN Document Server

Stanislav, Mark

2015-01-01

During the book, readers will learn about the various technical methods by which two-factor authentication is implemented, security concerns with each type of implementation, and contextual details to frame why and when these technologies should be used. Readers will also be provided with insight about the reasons that two-factor authentication is a critical security control, events in history that have been important to prove why organization and individual would want to use two factor, and core milestones in the progress of growing the market.

Impact of Technical Support on Customer Satisfaction

Directory of Open Access Journals (Sweden)

Natasa Gajic

2015-10-01

Full Text Available Technical support through co-creation of value in automotive paint processes and activities is essential to the success of paint manufacturing companies. This study aimed to explore the impact of technical support on customer satisfaction through value-in-use in the automotive paint market. A quantitative questionnaire survey involving a convenience sample of 169 respondents was used for data collection. The questionnaire design bore on the SERVPERF instrument with embedded value-in-use attributes. The data were analyzed by using SPSS 21 statistical methods exploratory factor analysis (EFA and multiple regression analysis (MRA. The findings of this study revealed that the key value-in-use attributes were relationship quality (trust, knowledge required for providing help in getting maximum product benefits, sharing of knowledge, and a range of product and service offerings that satisfy customer needs. Trust had the greatest impact on customer satisfaction. The results also revealed that service quality dimension assurance exerted the greatest positive impact on customer satisfaction.

MedlinePlus Connect: Technical Information

Science.gov (United States)

... MedlinePlus Connect → Technical Information URL of this page: https://medlineplus.gov/connect/technical.html MedlinePlus Connect: Technical ... will change.) Old URLs New URLs Web Application https://apps.nlm.nih.gov/medlineplus/services/mpconnect.cfm? ...

Surgeons' and trainees' perceived self-efficacy in operating theatre non-technical skills.

Science.gov (United States)

Pena, G; Altree, M; Field, J; Thomas, M J W; Hewett, P; Babidge, W; Maddern, G J

2015-05-01

An important factor that may influence an individual's performance is self-efficacy, a personal judgement of capability to perform a particular task successfully. This prospective study explored newly qualified surgeons' and surgical trainees' self-efficacy in non-technical skills compared with their non-technical skills performance in simulated scenarios. Participants undertook surgical scenarios challenging non-technical skills in two simulation sessions 6 weeks apart. Some participants attended a non-technical skills workshop between sessions. Participants completed pretraining and post-training surveys about their perceived self-efficacy in non-technical skills, which were analysed and compared with their performance in surgical scenarios in two simulation sessions. Change in performance between sessions was compared with any change in participants' perceived self-efficacy. There were 40 participants in all, 17 of whom attended the non-technical skills workshop. There was no significant difference in participants' self-efficacy regarding non-technical skills from the pretraining to the post-training survey. However, there was a tendency for participants with the highest reported self-efficacy to adjust their score downwards after training and for participants with the lowest self-efficacy to adjust their score upwards. Although there was significant improvement in non-technical skills performance from the first to second simulation sessions, a correlation between participants' self-efficacy and performance in scenarios in any of the comparisons was not found. The results suggest that new surgeons and surgical trainees have poor insight into their non-technical skills. Although it was not possible to correlate participants' self-belief in their abilities directly with their performance in a simulation, in general they became more critical in appraisal of their abilities as a result of the intervention. © 2015 BJS Society Ltd Published by John Wiley & Sons Ltd.

Technical Training: Technical Training Seminar

CERN Multimedia

2004-01-01

TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch Tuesday 3 February 2004 From 09:00 to 13:30 - Training Centre Auditorium - bldg. 593, room 11 USB (Universal Serial Bus) CYPRESS Seminar Claudia Colombini, Field Application Engineer CYPRESS ActiveComp Electronic GmbH D-85077 MANCHING, Germany As a pioneer in USB, CYPRESS sets the standard for cost-effective solutions without sacrificing functionality, performance or reliability. Having shipped over 200 million USB devices, Cypress is the undisputed market leader and demonstrates unmatched USB expertise. With the industry's broadest selection of USB solutions, Cypress has the right silicon, software and support for every USB application, from Low-speed to High-Speed and USB On-The-Go (OTG). 9:00 - 10:30 Overview of USB systems. USB CYPRESS product overview. Peripherals: Low Speed, Full Speed, High Speed (1.1 and 2.0). Hub Solutions, Embedded Host Solutions, On-The-Go (OTG) and wireless USB. USB Development Tools (first part) 10:30 -...

Technical Writing: Past, Present and Future

Science.gov (United States)

Mathes, J. C. (Compiler); Pinelli, T. E. (Compiler)

1981-01-01

The training of technical writers and the objectives of such education are discussed. Special emphasis was placed on the communication between technical personnel and non-technical personnel. The liabilities that affect technical writers were also discussed.

TECHNICAL CULTURE AND HUMAN AXJOSPHERE

Directory of Open Access Journals (Sweden)

­Krystyna Chałas

2014-11-01

Full Text Available Technical culture is the value of each historical period. It is the subject of the ongoing development. While it is a value which is associated with different categories of values, mainly material, cognitive, social. Between culture and these three categories of values ​ there is a cognitive effect. Technical culture determines the quality of human axjosphere. The aim of this study is to show the relationships and dependencies between technical culture and the structures in which a person lives and works. It is mainly about the answer to the question of which values of technical culture are closely related to and what are the inter dependencies? The primary task is to define the concept of the technical culture and to show its teaching essence. The second task boils down to indicate the range of values ​​inherent in the culture of technology, determining the value of the technological culture and values, which are developed by the technical culture. Indication of the interaction between the technical culture and values ​​is the third task.

US Nuclear Regulatory Commission human-factors program plan

International Nuclear Information System (INIS)

1983-08-01

The purpose of the NRC Human Factors Program Plan is to ensure that proper consideration is given to human factors in the design, operation, and maintenance of nuclear facilities. This initial plan addresses nuclear power plants (NPP) and describes (1) the technical assistance and research activities planned to provide the technical bases for the resolution of the remaining human factors related tasks described in NUREG-0660, The NRC Action Plan Developed as a Result of the TMI-2 Accident, and NUREG-0737, Clarification of TMI Action Plan Requirements, and (2) the additional human factors efforts identified during implementation of the Action Plan that should receive NRC attention. The plan represents a systematic and comprehensive approach for addressing human factors concerns important to NPP safety in the FY-83 through FY-85 time frame

Load factor trends in light water reactor units

International Nuclear Information System (INIS)

Lehtinen, E.A.

1990-01-01

The Technical Research Centre of Finland follows up and analyses nuclear power plant availability performances worldwide. The results of a trend study for the load factors of the LWR units have been updated to the end of 1987. The whole operating history, in the sense of the annual and cumulative load factors achieved by all the Western commercial LWR units until the end of 1987, has been taken into consideration. Some trends in the load factors have been identified by using an exponential regression model developed. The LWR units form quite an inhomogeneous population with respect to their age, technical characteristics, site country as well as cumulative load factors achieved. The cumulative load factors achieved by all the LWR units until the end of 1987 are presented individually in the scattergrams

Technical specification use and application

International Nuclear Information System (INIS)

Williamson, D.; Hoffman, D.R.

1991-01-01

Since early 1988 intensive efforts have been under way to produce a new and improved Standard Technical Specification. The program involves a coordinated effort between utility personnel representing each of the four nuclear steam supply system (NSSS) product lines, the NSSS vendors, and the US Nuclear Regulatory Commission (NRC). This intensive work period is actually the culmination of a decade of rhetoric about shortcomings of the existing technical specifications. Work on the improved technical specifications provided a unique forum for intense philosophical discussions between the users and enforcers of technical specifications, the outcome of which could have an impact on all licensees. Some of the more intriguing difficulties in the use and application of existing technical specifications, as well as discussions of the resolutions being applied in the improved technical specifications and the dilemmas remaining to be resolved are discussed in the paper

Recent productivity developments and technical change in Danish organic farming - stagnation?

DEFF Research Database (Denmark)

Sauer, Johannes; Graversen, Jesper Tranbjerg; Park, Tim

This paper attempts to quantitatively measure the change in the productivity of Dan-ish organic farming in recent years by using panel data on 56 organic farms mainly engaged in milk production for the period 2002 to 2004. Based on a translog pro-duction frontier framework the technical and scale...... efficiency on farm level is ana-lysed by considering also curvature consistency. The total change in productivity for the reference period is measured by using the Malmquist total factor productivity in-dex approach based on a time trends as well as a general index model specification. Input specific bias...... in technical change as well elasticities of input substitution are analyzed. Fators for the development of technical change and the change in effi-ciency over time are investigated by applying a bootstrapped ITSUR technique. Fi-nally we try to conclude on the significance of subsidies for promoting long term...

Technical resource documents and technical handbooks for hazardous-wastes management

Energy Technology Data Exchange (ETDEWEB)

Schomaker, N.B.; Bliss, T.M.

1986-07-01

The Environmental Protection Agency is preparing a series of Technical Resource Documents (TRD's) and Technical Handbooks to provide best engineering control technology to meet the needs of the Resource Conservation and Recovery Act (RCRA) and the Comprehensive Environmental Response Compensation and Liability Act (CERCLA) respectively. These documents and handbooks are basically compilation of research efforts of the Land Pollution Control Division (LPCD) to date. The specific areas of research being conducted under the RCRA land disposal program relate to laboratory, pilot and field validation studies in cover systems, waste leaching and solidification, liner systems and disposal facility evaluation. The technical handbooks provide the EPA Program Offices and Regions, as well as the states and other interested parties, with the latest information relevant to remedial actions.

Determination of dynamic performance of freight cars taking into account technical condition of side bearers

Directory of Open Access Journals (Sweden)

S.Myamlin

2013-02-01

Full Text Available Purpose. The railway transport plays an important role in social and economic life of the country and carries out the large containment of transportation activities. The transport industry should migrate towards innovation changes and increase its significance as an important transit subsystem on the way of renovation of both the infrastructure and the strategy of all transportation process components including the interaction with other transport modes. At present the life sets strategic challenges for the railway branch, and the basic goals among them are as follows: high-speed train traffic development, increase of the weight of freight trains, new rolling stock development etc. Due to the urgency of this subject, the researchers should cope with the task devoted to one of aspects of improving the freight transportation efficiency, namely to the study of effects of various factors and characteristics of technical conditions of the freight cars running gears (which are unavoidable to arise during operation on their basic dynamic indices. The deviations of technical conditions of running gears from the normal state of the wedge system of bogie swing suspension also play an important role among them. The purpose of the paper is to investigate the influence of different factors of the technical conditions of freight car running gears (size deviation in both the bearers and the wedge system during operation on their basic indices – coefficients of horizontal and vertical dynamics, vehicle body acceleration, frame strength, and derailment stability coefficient. Methodology. The study was conducted by numerical integration and mathematical modeling of the freight car dynamic loading using the software package “Dynamics of Rail Vehicles” (“DYNRAIL”. Findings. As a result of the research for freight car dynamic coefficients determination taking into account technical conditions of the side bearers, the dependencies of the basic freight cars

Technical obstacles to nuclear security - Russian perspective

International Nuclear Information System (INIS)

Pshakin, G.

2005-01-01

Full text: Present political, economical and social development the world - wide and in particular countries and regions facilitate number of serious and dangerous challenges for people responsible for security of materials and facilities, which could be used as a threat to the humankind in case of unauthorized approach. A number of factors have impact on the security including political, social, financial and technical nature. The security of nuclear materials and facilities where nuclear materials located and under processing is facing a number of problems such as control of the personnel who is handling the materials, access to the materials and the facilities, accounting and control of the materials storage, transportation, transactions, processing, physical protection of the materials. Each aspect of those problems must be taken into account for establishing most efficient way to keep the nuclear materials out of hands of the terrorists. Technical aspects which require serious and intent relation from political and technical communities in Russia (as example) are the following: legal base for nuclear materials protection, control and accounting and export control; personnel for nuclear materials control and accounting - skill, reliability, responsibility, training and new generation education; personnel for physical protection - skill, reliability, responsibility, training; structure of the system and equipment for materials control, verification, accountability; structure of the system and equipment for physical protection; regulatory supervision of the MPC+A system effectiveness. (author)

Technical standards in nuclear area

International Nuclear Information System (INIS)

Grimberg, M.

1978-01-01

The technical standardization in nuclear area is discussed. Also, the competence of CNEN in standardization pursuit is analysed. Moreover, the process of working up of technical standards is explained; in addition, some kinds of technical standards are discussed. (author) [pt

The effects of environmental regulation and technical progress on CO2 Kuznets curve: An evidence from China

International Nuclear Information System (INIS)

Yin, Jianhua; Zheng, Mingzheng; Chen, Jian

2015-01-01

Based on environmental Kuznets curve theory, a panel data model which takes environmental regulation and technical progress as its moderating factors was developed to analyse the institutional and technical factors that affect the path of low-carbon economic development. The results indicated that there was a CO 2 emission Kuznets curve seen in China. Environmental regulation had a significant moderating effect on the curve, and the inflection of CO 2 emissions could come substantially earlier under stricter environmental regulation. Meanwhile, the impact of technical progress on the low-carbon economic development path had a longer hysteresis effect but restrained CO 2 emission during its increasing stage and accelerated its downward trend during the decreasing stage which was conducive to emission reduction. Strict environmental regulation could force the high-carbon emitting industries to transfer from the eastern regions to the central or the western regions of China, which would make the CO 2 Kuznets curve higher in its increasing stage and lower in its decreasing stage than that under looser regulation. Furthermore, energy efficiency, energy structure, and industrial structure exerted a significant direct impact on CO 2 emissions; we should consider the above factors as essential in the quest for low-carbon economic development. - Highlights: • Estimate moderating effect of environmental regulation and technical progress on EKC. • There was a CO 2 emission Kuznets curve in effect in China. • Environmental regulation presents significant moderating effect on EKC. • Technical progress moderates the relationship between income and CO 2 emissions

Technical Writing Tips

Science.gov (United States)

Kennedy, Patrick M.

2004-01-01

The main reason engineers, technicians, and programmers write poor technical documents is because they have had little training or experience in that area. This article addresses some of the basics that students can use to master technical writing tasks. The article covers the most common problems writers make and offers suggestions for improving…

RF Regional Technical Centers for MPC and A Sustainability Operations

International Nuclear Information System (INIS)

Lambert, L D; Toth, W J; Hendrickson, S

2004-01-01

The National Nuclear Security Administration (NNSA) programmatic vision to be a catalyst in Russia's assumption of responsibility for long-term system operation is exemplified in the sustainability cooperation with the RF Ministry of Defense (MOD). An identified goal for the MPC and A Program is to encourage the development of Russian Federation (RF) capabilities and commitments to operate and maintain safeguard improvements. The RF MOD Technical Support Center development fulfills the NNSA mission and MPC and A Program goal. The regional technical center concept involves a systematic approach to aid in the determination of the level of sustainability assistance required to transition operators, maintenance, training, and testing of MPC and A systems to the RF MOD. This paper describes the process used to create the RF MOD Technical support center. First are described the needs analyses conducted to determine the key system sustainability factors requiring support. These sustainability functions are then compiled to influence the form and ultimate physical design of the technical support center. Operational interfaces are described, in detail that show the benefit of the center to the individual sites. Finally, benefits relating to information accessibility and other economies of scale are described that highlight the central center concept's strengths

TECHNICAL COORDINATION

CERN Multimedia

A. Ball

Overview From a technical perspective, CMS has been in “beam operation” state since 6th November. The detector is fully closed with all components operational and the magnetic field is normally at the nominal 3.8T. The UXC cavern is normally closed with the radiation veto set. Access to UXC is now only possible during downtimes of LHC. Such accesses must be carefully planned, documented and carried out in agreement with CMS Technical Coordination, Experimental Area Management, LHC programme coordination and the CCC. Material flow in and out of UXC is now strictly controlled. Access to USC remains possible at any time, although, for safety reasons, it is necessary to register with the shift crew in the control room before going down.It is obligatory for all material leaving UXC to pass through the underground buffer zone for RP scanning, database entry and appropriate labeling for traceability. Technical coordination (notably Stephane Bally and Christoph Schaefer), the shift crew and run ...

TECHNICAL COORDINATION

CERN Multimedia

A. Ball and W. Zeuner

2011-01-01

In this report we will review the main achievements of the Technical Stop and the progress of several centrally-managed projects to support CMS operation and maintenance and prepare the way for upgrades. Overview of the extended Technical Stop  The principal objectives of the extended Technical Stop affecting the detector itself were the installation of the TOTEM T1 telescopes on both ends, the readjustment of the alignment link-disk in YE-2, the replacement of the light-guide sleeves for all PMs of both HFs, and some repairs on TOTEM T2 and CASTOR. The most significant tasks were, however, concentrated on the supporting infrastructure. A detailed line-by-line leak search was performed in the C6F14 cooling system of the Tracker, followed by the installation of variable-frequency drives on the pump motors of the SS1 and SS2 tracker cooling plants to reduce pressure transients during start-up. In the electrical system, larger harmonic filters were installed in ...

Evaluating Technical Efficiency of Nursing Care Using Data Envelopment Analysis and Multilevel Modeling.

Science.gov (United States)

Min, Ari; Park, Chang Gi; Scott, Linda D

2016-05-23

Data envelopment analysis (DEA) is an advantageous non-parametric technique for evaluating relative efficiency of performance. This article describes use of DEA to estimate technical efficiency of nursing care and demonstrates the benefits of using multilevel modeling to identify characteristics of efficient facilities in the second stage of analysis. Data were drawn from LTCFocUS.org, a secondary database including nursing home data from the Online Survey Certification and Reporting System and Minimum Data Set. In this example, 2,267 non-hospital-based nursing homes were evaluated. Use of DEA with nurse staffing levels as inputs and quality of care as outputs allowed estimation of the relative technical efficiency of nursing care in these facilities. In the second stage, multilevel modeling was applied to identify organizational factors contributing to technical efficiency. Use of multilevel modeling avoided biased estimation of findings for nested data and provided comprehensive information on differences in technical efficiency among counties and states. © The Author(s) 2016.

AN ASSESSMENT OF TOTAL FACTOR PRODUCTIVITY

Directory of Open Access Journals (Sweden)

Dana GÂRDU

2011-10-01

Full Text Available The high performing East Asian development model sparked controversies in the academia: its success was ascribed alternatively to nation-states, markets, and sociocultural factors. This paper undertakes a comparative assessment of the last two generations of submodels, i.e. ASEAN-4 and China, by quantifying and interpreting their total factor productivity (TFP using the Solow Model. Results show that capital accumulation was their major growth driver before the beginning of the millennium. Subsequently growth is led by technical change in ASEAN-32, and capital inputs respectively in late industrialising economies, i.e., China and the Philippines. The main differences between the two submodels consist in levels in growth rates and technical progress contributions, which are strongly sped up in China by transition and integration in global production networks. For ASEAN-4 average null or negligible TFP values in the 1990s point to structural vulnerabilities that surface during the Asian financial crisis. ASEAN-3’s recovery is led by technical change though.

Effective technical service in the life cycle of heavy dumpers

Directory of Open Access Journals (Sweden)

Михайло Валерійович Помазков

2016-11-01

Full Text Available A comparative analysis of the known systems of technical reliability of heavy dumpers functionality has been made. It has been stated that the previously proposed methods to determine the optimal service life of heavy-duty dumpers are not effective enough and do not take into account the whole range of factors specific to the operation of heavy dumpers in the current economic realities of industrial enterprises. Based on the analysis results, a mechanism of determining the optimal service life of heavy-duty dumpers and their constituent technical systems ensuring the operational reliability of heavy-duty dumpers has been offered. The article takes into account the analysis of resource factors, general description of system logistic tasks, the main provisions of serviceability, the resource forming in route charts at ore mining and metallurgical enterprises, the use of theoretical developments in practice. Heavy dumpers generalized description modelling shown in the article, the principle of resource use by using interchangable work at different intensity routes has received confirmation in the dumpers’ work schedule

LHC Availability 2017: Technical Stop 1 to Technical Stop 2

CERN Document Server

Todd, Benjamin; Apollonio, Andrea; Walsh, David John; CERN. Geneva. ATS Department

2017-01-01

This document summarises the LHC machine availability for the period of Technical Stop 1 (TS1) to Technical Stop 2 (TS2) in 2017. This period was dedicated to proton physics with a bunch spacing of 25ns. This note has been produced and ratified by the Availability Working Group which has complied fault information for the period in question using the Accelerator Fault Tracker.

Overview of technical barriers and implementation of cellulosic ethanol in the U.S

International Nuclear Information System (INIS)

Kim, Tae Hoon; Kim, Tae Hyun

2014-01-01

There is mounting concern about the buildup of carbon dioxide (CO 2 ) and other so-called greenhouse gases in the atmosphere. In general, bioethanol production requires minimal fossil fuel input in the conversion step, and ethanol is considered a promising alternative fuel to petroleum-derived products. It is anticipated that ethanol production with second-generation biomass, i.e. lignocellulosic materials, will be possible on a large scale in the near future. Latest efforts have been focused on overcoming technical challenges in bioconversion, particularly pretreatment, and finding the solutions required to implement biorefinery on a large scale. This paper introduces and reviews the current status of research, and of the ethanol industry in the U.S. In addition, other important concepts in biofuels, cellulosic ethanol, and biorefinery in general are reviewed, and the key technical issues in bioconversion of cellulosic ethanol, such as pretreatment and factors affecting bioconversion of biomass are also discussed. - Highlights: • The current status of research, and of the ethanol industry in the U.S. • Important concepts in biofuels, cellulosic ethanol, and biorefinery. • The key technical issues in bioconversion of cellulosic ethanol. • Pretreatment and factors affecting bioconversion of biomass

Technical evaluation report of the Fort St. Vrain final draft upgraded technical specifications

International Nuclear Information System (INIS)

Kimura, C.Y.

1989-01-01

This report is a technical evaluation of the final draft of the Fort St. Vrain (FSV) Upgraded Technical Specifications (UT/S) as issued by Public Service of Colorado (PSC) on May 27, 1988 with subsequent supplemental updates issued on June 15, 1988 and August 5, 1988. It has been compared for consistency, and safety conservatism with the Fort St. Vrain (FSV) Updated Final Safety Analysis Report (FSAR), the FSV Safety Evaluation Report (SER), the Facility Operating License, DPR-34, and all amendments to the Facility Operating License issued as of June 1, 1988, and Appendix A to the Operating License DPR-34, Technical Specifications. Because of the age of the plant, no supplements to the Fort St. Vrain SER have been issued since the original SER was not issued as a WASH or a NUREG report. This made it necessary to review all amendments to the Facility Operating License since they would contain the safety evaluations done to support changes to the Facility Operating License. The upgraded Fort St. Vrain Technical Specifications were also broadly compared with the latest Westinghouse Standard Technical Specifications (WSTS) to assure that what was proposed for Fort St. Vrain was consistent with the latest NRC staff practices for standard technical specifications

The technical supervision interface

CERN Document Server

Sollander, P

1998-01-01

The Technical Control Room (TCR) is currently using 30 different applications for the remote supervision of the technical infrastructure at CERN. These applications have all been developed with the CERN made Uniform Man Machine Interface (UMMI) tools built in 1990. However, the visualization technology has evolved phenomenally since 1990, the Technical Data Server (TDS) has radically changed our control system architecture, and the standardization and the maintenance of the UMMI applications have become important issues as their number increases. The Technical Supervision Interface is intended to replace the UMMI and solve the above problems. Using a standard WWW-browser for the display, it will be inherently multi-platform and hence available for control room operators, equipment specialists and on-call personnel.

What factors facilitate regulatory competence in supervising the safety of nuclear technology?

International Nuclear Information System (INIS)

Mishar, Marina

2012-01-01

The proposed utilization of nuclear energy for electricity generation as the alternative energy source requires Atomic Energy Licensing Board (AELB), the Malaysian nuclear regulatory body taking key role in supervising the safety of the program. This study looked into factors influencing the competency of current AELB human resource as technical competency has been identified as one of the main contributors to the success of a civil nuclear power program. The four quadrant competency model developed by International Atomic Energy Agency was utilized as the required competency. A comprehensive study on 81 personnel from five states in different geographic regions of the country were carried out to investigate the impact of six factors related to competency (educational level, years of working experience, trainings attended, participation in technical committees, numbers of technical papers written and number of technical presentation presented) on four dependent measures in the areas of regulatory competency (legal basis, technical disciplines, regulatory practices and personal and interpersonal effectiveness). Multiple regression (method enter) identified factors that had significant contribution to level of competency while stepwise regression resulted in identifying predictors to enhance competencies. Results were mixed but each of the independent factors is a predictor to different competencies. This study had identified the best predictors that could significantly contribute to the enhancement of regulatory. (author)

Technical training: places available

CERN Multimedia

2014-01-01

If you would like more information on a course, or have any other inquiry/suggestions, please contact Technical.Training@cern.ch. Eva Stern and Elise Romero, Technical Training Administration (Tel: 74924)

Technical training: places available

CERN Document Server

2013-01-01

If you would like more information on a course, or for any other inquiry/suggestions, please contact Technical.Training@cern.ch. Eva Stern and Elise Romero, Technical Training Administration (Tel: 74924)

Technical training - places available

CERN Document Server

2013-01-01

If you would like more information on a course, or have any other inquiry/suggestions, please contact Technical.Training@cern.ch. Eva Stern and Elise Romero, Technical Training Administration (Tel: 74924)

49 CFR 552.6 - Technical review.

Science.gov (United States)

2010-10-01

... 49 Transportation 6 2010-10-01 2010-10-01 false Technical review. 552.6 Section 552.6... § 552.6 Technical review. The appropriate Associate Administrator conducts a technical review of the petition. The technical review may consist of an analysis of the material submitted, together with...

Technical training: places available

CERN Multimedia

2014-01-01

If you would like more information on a course, or have any other inquiry/suggestions, please contact Technical.Training@cern.ch. Eva Stern and Marie Lahchimi, Technical Training Administration (Tel: 74924)

Developing and Improving Student Non-Technical Skills in IT Education: A Literature Review and Model

Directory of Open Access Journals (Sweden)

Marcia Hagen

2016-06-01

Full Text Available The purpose of this paper is to identify portions of the literature in the areas of Information Technology (IT management, skills development, and curriculum development that support the design of a holistic conceptual framework for instruction in non-technical skills within the IT higher education context. This article review provides a framework for understanding how the critical success factors related to IT and Information Systems (IS professional success is impacted by developing students’ non-technical skills. The article culminates in a holistic conceptual framework for developing non-technical skills within the IT higher education context. Implications for theory and research are provided.

Energy flow models for the estimation of technical losses in distribution network

International Nuclear Information System (INIS)

Au, Mau Teng; Tan, Chin Hooi

2013-01-01

This paper presents energy flow models developed to estimate technical losses in distribution network. Energy flow models applied in this paper is based on input energy and peak demand of distribution network, feeder length and peak demand, transformer loading capacity, and load factor. Two case studies, an urban distribution network and a rural distribution network are used to illustrate application of the energy flow models. Results on technical losses obtained for the two distribution networks are consistent and comparable to network of similar types and characteristics. Hence, the energy flow models are suitable for practical application.

U.S. activities related to fast reactors and ADS

International Nuclear Information System (INIS)

Finck, Phillip J.

2001-01-01

The U.S. nuclear power industry achieved its second straight year of record power generation levels during 2000. Total power generated was 753.9 billion kWh, 3.5 percent above the previous record of 728.1 billion kWh set in 1999. Recent years of reliable service and declining production costs have led to increased industry interest in nuclear power plant license renewal. The Nuclear Regulatory Commission approved the license renewal applications for five U.S. nuclear power plants in 2000. Five additional applications were received and 28 more are planned to be submitted by 2004. Concerns over energy resource availability, climate change, air quality, and energy security suggest an important role for nuclear power in future energy supplies. While the current Generation II and III nuclear power plant designs provide an economically, technically, and publicly acceptable electricity supply in many markets, further advances in nuclear energy system design can broaden the opportunities for the use of nuclear energy. To explore these opportunities, the U. S. Department of Energy's Office of Nuclear Energy, Science and Technology has engaged governments, industry, and the research community worldwide in a wide-ranging discussion on the development of next-generation nuclear energy systems known as 'Generation IV'. The I-NERI program has the following objectives: Develop advanced concepts and scientific breakthroughs in nuclear fission and reactor technology to address and overcome the principal technical and scientific obstacles to the expanded use of nuclear energy worldwide; Promote bilateral and multilateral collaboration with international agencies and research organizations to improve development of nuclear energy; and Promote and maintain nuclear science and engineering infrastructure to meet future technical challenges. I-NERI will sponsor innovative research and development in the following areas: Next-generation nuclear energy plant designs with higher efficiency

Human factors analysis of incident/accident report

International Nuclear Information System (INIS)

Kuroda, Isao

1992-01-01

Human factors analysis of accident/incident has different kinds of difficulties in not only technical, but also psychosocial background. This report introduces some experiments of 'Variation diagram method' which is able to extend to operational and managemental factors. (author)

Technical training: places available

CERN Multimedia

2013-01-01

If you would like more information on a course, or for any other inquiry/suggestions, please contact Technical.Training@cern.ch. Eva Stern and Elise Romero, Technical Training Administration (Tél : 74924)  

Factors influencing e-commerce development in Serbia

OpenAIRE

Kalinić, Zoran; Ranković, Vladimir; Kalinić, Ljubina

2016-01-01

In this paper, an overview of current state of e-commerce development in Serbia is presented. Also, some important factors influencing e-commerce diffusion are discussed. The factors are divided into four groups: technical factors, which cover e- commerce telecommunication and logistics infrastructure; legal factors, i.e. necessary laws and regulations on e-commerce; economic factors, and psychological factors and local culture. The study showed very strong correlation between broadband inter...

Technical Assistance Plan (TAP)

Science.gov (United States)

A Technical Assistance Plan (TAP) enables community groups to retain the services of an independent technical advisor and to provide resources for a community group to help inform other community members about site decisions.

Reader-Centered Technical Writing

Science.gov (United States)

Narayanan, M.

2012-12-01

Technical writing is an essential part of professional communication and in recent years it has shifted from a genre-based approach. Formerly, technical writing primarily focused on generating templates of documents and sometimes it was creating or reproducing traditional forms with minor modifications and updates. Now, technical writing looks at the situations surrounding the need to write. This involves deep thinking about the goals and objectives of the project on hand. Furthermore, one observes that it is very important for any participatory process to have the full support of management. This support needs to be well understood and believed by employees. Professional writing may be very persuasive in some cases. When presented in the appropriate context, technical writing can persuade a company to improve work conditions ensuring employee safety and timely production. However, one must recognize that lot of professional writing still continues to make use of reports and instruction manuals. Normally, technical and professional writing addresses four aspects. Objective: The need for generating a given professionally written technical document and the goals the document is expected to achieve and accomplish. Clientele: The clientele who will utilize the technical document. This may include the people in the organization. This may also include "unintended readers." Customers: The population that may be affected by the content of the technical document generated. This includes the stakeholders who will be influenced. Environment: The background in which the document is created. Also, the nature of the situation that warranted the generation of the document. Swiss Psychologist Jean Piaget's view of Learning focuses on three aspects. The author likes to extend Jean Piaget's ideas to students, who are asked to prepare and submit Reader-Centered Technical Writing reports and exercises. Assimilation: Writers may benefit specifically, by assimilating a new object into

Assessing Students' Technical Skill Attainment

Science.gov (United States)

Jorgensen, Haley

2010-01-01

The Wisconsin Technical College System (WTCS) is working to comply with the Carl D. Perkins Career and Technical Education Improvement Act of 2006 (Perkins) to ensure that its graduates have mastered the technical skills needed by business and industry. The legislation requires that each state identify and approve program assessment strategies…

Integrating technical and non-technical skills coaching in an acute trauma surgery team training: Is it too much?

Science.gov (United States)

Alken, Alexander; Luursema, Jan-Maarten; Weenk, Mariska; Yauw, Simon; Fluit, Cornelia; van Goor, Harry

2017-08-25

Research on effective integration of technical and non-technical skills in surgery team training is sparse. In a previous study we found that surgical teachers predominantly coached on technical and hardly on non-technical skills during the Definitive Surgical and Anesthetic Trauma Care (DSATC) integrated acute trauma surgery team training. This study aims to investigate whether the priming of teachers could increase the amount of non-technical skills coaching during such a training. Coaching activities of 12 surgical teachers were recorded on audio and video. Six teachers were primed on non-technical skills coaching prior to the training. Six others received no priming and served as controls. Blind observers reviewed the recordings of 2 training scenario's and scored whether the observed behaviors were directed on technical or non-technical skills. We compared the frequency of the non-technical skills coaching between the primed and the non-primed teachers and analyzed for differences according to the trainees' level of experience. Surgical teachers coached trainees during the highly realistic DSATC integrated acute trauma surgery team training. Trainees performed damage control surgery in operating teams on anesthetized porcine models during 6 training scenario's. Twelve experienced surgical teachers participated in this study. Coaching on non-technical skills was limited to about 5%. The primed teachers did not coach more often on non-technical skills than the non-primed teachers. We found no differences in the frequency of non-technical skills coaching based on the trainees' level of experience. Priming experienced surgical teachers does not increase the coaching on non-technical skills. The current DSATC acute trauma surgery team training seems too complex for integrating training on technical and non-technical skills. Patient care, Practice based learning and improvement. Copyright © 2017 Elsevier Inc. All rights reserved.

Does service integration improve technical quality of care in low-resource settings? An evaluation of a model integrating HIV care into family planning services in Kenya.

Science.gov (United States)

Mutemwa, Richard; Mayhew, Susannah H; Warren, Charlotte E; Abuya, Timothy; Ndwiga, Charity; Kivunaga, Jackline

2017-11-01

The aim of this study was to investigate association between HIV and family planning integration and technical quality of care. The study focused on technical quality of client-provider consultation sessions. The cross-sectional study observed 366 client-provider consultation sessions and interviewed 37 health care providers in 12 public health facilities in Kenya. Multilevel random intercept and linear regression models were fitted to the matched data to investigate relationships between service integration and technical quality of care as well as associations between facility-level structural and provider factors and technical quality of care. A sensitivity analysis was performed to test for hidden bias. After adjusting for facility-level structural factors, HIV/family planning integration was found to have significant positive effect on technical quality of the consultation session, with average treatment effect 0.44 (95% CI: 0.63-0.82). Three of the 12 structural factors were significantly positively associated with technical quality of consultation session including: availability of family planning commodities (9.64; 95% CI: 5.07-14.21), adequate infrastructure (5.29; 95% CI: 2.89-7.69) and reagents (1.48; 95% CI: 1.02-1.93). Three of the nine provider factors were significantly positively associated with technical quality of consultation session: appropriate provider clinical knowledge (3.14; 95% CI: 1.92-4.36), job satisfaction (2.02; 95% CI: 1.21-2.83) and supervision (1.01; 95% CI: 0.35-1.68), while workload (-0.88; 95% CI: -1.75 to - 0.01) was negatively associated. Technical quality of the client-provider consultation session was also determined by duration of the consultation and type of clinic visit and appeared to depend on whether the clinic visit occurred early or later in the week. Integration of HIV care into family planning services can improve the technical quality of client-provider consultation sessions as measured by both health facility

Spatial abilities and technical skills performance in health care: a systematic review.

Science.gov (United States)

Langlois, Jean; Bellemare, Christian; Toulouse, Josée; Wells, George A

2015-11-01

The aim of this study was to conduct a systematic review and meta-analysis of the relationship between spatial abilities and technical skills performance in health care in beginners and to compare this relationship with those in intermediate and autonomous learners. Search criteria included 'spatial abilities' and 'technical skills'. Keywords related to these criteria were defined. A literature search was conducted to 20 December, 2013 in Scopus (including MEDLINE) and in several databases on EBSCOhost platforms (CINAHL Plus with Full Text, ERIC, Education Source and PsycINFO). Citations were obtained and reviewed by two independent reviewers. Articles related to retained citations were reviewed and a final list of eligible articles was determined. Articles were assessed for quality using the Scottish Intercollegiate Guidelines Network-50 assessment instrument. Data were extracted from articles in a systematic way. Correlations between spatial abilities test scores and technical skills performance were identified. A series of 8289 citations was obtained. Eighty articles were retained and fully reviewed, yielding 36 eligible articles. The systematic review found a tendency for spatial abilities to be negatively correlated with the duration of technical skills and positively correlated with the quality of technical skills performance in beginners and intermediate learners. Pooled correlations of studies were -0.46 (p = 0.03) and -0.38 (95% confidence interval [CI] -0.53 to -0.21) for duration and 0.33 (95% CI 0.20-0.44) and 0.41 (95% CI 0.26-0.54) for quality of technical skills performance in beginners and intermediate learners, respectively. However, correlations between spatial abilities test scores and technical skills performance were not statistically significant in autonomous learners. Spatial abilities are an important factor to consider in selecting and training individuals in technical skills in health care. © 2015 John Wiley & Sons Ltd.

Simulation-based ureteroscopy skills training curriculum with integration of technical and non-technical skills: a randomised controlled trial.

Science.gov (United States)

Brunckhorst, Oliver; Shahid, Shahab; Aydin, Abdullatif; McIlhenny, Craig; Khan, Shahid; Raza, Syed Johar; Sahai, Arun; Brewin, James; Bello, Fernando; Kneebone, Roger; Khan, Muhammad Shamim; Dasgupta, Prokar; Ahmed, Kamran

2015-09-01

Current training modalities within ureteroscopy have been extensively validated and must now be integrated within a comprehensive curriculum. Additionally, non-technical skills often cause surgical error and little research has been conducted to combine this with technical skills teaching. This study therefore aimed to develop and validate a curriculum for semi-rigid ureteroscopy, integrating both technical and non-technical skills teaching within the programme. Delphi methodology was utilised for curriculum development and content validation, with a randomised trial then conducted (n = 32) for curriculum evaluation. The developed curriculum consisted of four modules; initially developing basic technical skills and subsequently integrating non-technical skills teaching. Sixteen participants underwent the simulation-based curriculum and were subsequently assessed, together with the control cohort (n = 16) within a full immersion environment. Both technical (Time to completion, OSATS and a task specific checklist) and non-technical (NOTSS) outcome measures were recorded with parametric and non-parametric analyses used depending on the distribution of our data as evaluated by a Shapiro-Wilk test. Improvements within the intervention cohort demonstrated educational value across all technical and non-technical parameters recorded, including time to completion (p technical and non-technical skills teaching is both educationally valuable and feasible. Additionally, the curriculum offers a validated simulation-based training modality within ureteroscopy and a framework for the development of other simulation-based programmes.

Self vs expert assessment of technical and non-technical skills in high fidelity simulation.

Science.gov (United States)

Arora, Sonal; Miskovic, Danilo; Hull, Louise; Moorthy, Krishna; Aggarwal, Rajesh; Johannsson, Helgi; Gautama, Sanjay; Kneebone, Roger; Sevdalis, Nick

2011-10-01

Accurate assessment is imperative for learning, feedback and progression. The aim of this study was to examine whether surgeons can accurately self-assess their technical and nontechnical skills compared with expert faculty members' assessments. Twenty-five surgeons performed a laparoscopic cholecystectomy (LC) in a simulated operating room. Technical and nontechnical performance was assessed by participants and faculty members using the validated Objective Structured Assessment of Technical Skills (OSATS) and the Non-Technical Skills for Surgeons scale (NOTSS). Assessment of technical performance correlated between self and faculty members' ratings for experienced (median score, 30.0 vs 31.0; ρ = .831; P = .001) and inexperienced (median score, 22.0 vs 28.0; ρ = .761; P = .003) surgeons. Assessment of nontechnical skills between self and faculty members did not correlate for experienced surgeons (median score, 8.0 vs 10.5; ρ = -.375; P = .229) or their more inexperienced counterparts (median score, 9.0 vs 7.0; ρ = -.018; P = .953). Surgeons can accurately self-assess their technical skills in virtual reality LC. Conversely, formal assessment with faculty members' input is required for nontechnical skills, for which surgeons lack insight into their behaviours. Copyright © 2011 Elsevier Inc. All rights reserved.

Technical Support and Transfer of Geothrmal Technical Knowledge and Information

Energy Technology Data Exchange (ETDEWEB)

John W. Lund; Toni" Boyd

2007-11-14

The Geo-Heat Center (GHC) staff provided responses to 1442 technical support requests during the contract period (April 1, 2006 to September 30, 2007), which were six quarters under this contract. Our website, consisting of 1900 files, also contributes to our technical assistance activity. Downloaded files were 1,889,323 (3,448 per day) from our website, the total number of users was 1,365,258 (2,491 per day), and the total number of hits were 6,008,500 (10,064 per day). The GHC staff attended 60 workshops, short course and professional meeting and made 29 technical presentations. The staff also prepared and mailed out 2,000 copies of each of five issues of the GHC Quaterly Bulletin which contained 26 articles. We also mailed out approximately 5,000 papers and publications to interested individuals and organizations.

Examining the Impact of Non-Technical Security Management Factors on Information Security Management in Health Informatics

Science.gov (United States)

Imam, Abbas H.

2013-01-01

Complexity of information security has become a major issue for organizations due to incessant threats to information assets. Healthcare organizations are particularly concerned with security owing to the inherent vulnerability of sensitive information assets in health informatics. While the non-technical security management elements have been at…

A Study on intensifying efficiency for international collaborative development of Advanced Nuclear Energy Technology

International Nuclear Information System (INIS)

Chang, Moon Hee; Kim, H. R.; Kim, H. J.

2009-08-01

The objective of the study was to participate the GIF for the efficient propulsion of future nuclear system development. For achieving the objective of this study, the followings were carried out. · Investigation and analysis of the international and domestic trends related to future nuclear system · To maximize the national interests by the strategic participation of GIF meeting - To participate of GIF meeting and to support of relative work - To investigate the System R and D Arrangement and to inform its progress situation · To maximize the propulsion results of Korea/U.S nuclear energy joint research(I-NERI) - To support a delegation by the review of agenda in aspect of the technical/legal point - To participate of BINERIC meeting and to support of relative work · Streamline the nuclear energy R and D due to the effective connection between domestic R and D and international collaboration The result of this study may be used for 1) contribution to establishing the effective foundation and broadening the cooperation activities between the advanced countries and Korea and 2) contribution effective management of Gen IV international collaboration by technical/legal supporting

Reduced waste generation technical work plan

International Nuclear Information System (INIS)

1987-05-01

The United States Department of Energy has established policies for avoiding plutonium losses to the waste streams and minimizing the generation of wastes produced at its nuclear facilities. This policy is evidenced in DOE Order 5820.2, which states ''Technical and administrative controls shall be directed towards reducing the gross volume of TRU waste generated and the amount of radioactivity in such waste.'' To comply with the DOE directive, the Defense Transuranic Waste Program (DTWP) supports and provides funding for specific research and development tasks at the various DOE sites to reduce the generation of waste. This document has been prepared to give an overview of current and past Reduced Waste Generation task activities which are to be based on technical and cost/benefit factors. The document is updated annually, or as needed, to reflect the status of program direction. Reduced Waste Generation (RWG) tasks encompass a wide range of goals which are basically oriented toward (1) avoiding the generation of waste, (2) changing processes or operations to reduce waste, (3) converting TRU waste into LLW by sorting or decontamination, and (4) reducing volumes through operations such as incineration or compaction

CORPORATE VALUATION IN TERMS OF ITS TECHNICAL REEQUIPMENT

Directory of Open Access Journals (Sweden)

A.I. Balandin

2009-09-01

Full Text Available Factors of technical reequipment of the mechanical engineering enterprises are allocated. Business diagnostics of one of the largest Russian manufacturers of the metal-cutting tools, accessories, the supplier of modern high-tech machine tools, equipment and efficient technologies in the Russian Federation – The Ural Machine-building Corporation «Pumori-SIZ» is conducted. A method of assessing the market value of the company, which feature is the use of combined (cost-income approach is developed.

Citation analysis of Computer Standards & Interfaces: Technical or also non-technical focus?

NARCIS (Netherlands)

G. van de Kaa (Geerten); H.J. de Vries (Henk); B. Baskaran (Balakumaran)

2015-01-01

textabstractThis paper analyzes to which extent research published in Computer Standards & Interfaces (CSI) has a technical focus. We find that CSI has been following its scope very closely in the last three years and that the majority of its publications have a technical focus. Articles published

Does Technical Success of Angioplasty in Dysfunctional Hemodialysis Accesses Correlate with Access Patency?

Energy Technology Data Exchange (ETDEWEB)

Sidhu, Arshdeep; Tan, Kong T.; Noel-Lamy, Maxime; Simons, Martin E.; Rajan, Dheeraj K., E-mail: dheeraj.rajan@uhn.ca [University Health Network, University of Toronto, Division of Vascular and Interventional Radiology, Peter Munk Cardiac Center (Canada)

2016-10-15

PurposeTo study if <30 % residual stenosis post angioplasty (PTA) correlates with primary access circuit patency, and if any variables predict technical success.Materials and MethodsA prospective observational study was performed between January 2009 and December 2012, wherein 76 patients underwent 154 PTA events in 56 prosthetic grafts (AVG) and 98 autogenous fistulas (AVF). Data collected included patient age, gender, lesion location and laterality, access type and location, number of prior interventions, and transonic flow rates pre- and postintervention. Impact of technical outcome on access patency was assessed. Univariate logistic regression was used to assess the impact of variables on technical success with significant factors assessed with a multiple variable model.ResultsTechnical success rates of PTA in AVFs and AVGs were 79.6 and 76.7 %, respectively. Technical failures of PTA were associated with an increased risk of patency loss among circuits with AVFs (p < 0.05), but not with AVGs (p = 0.7). In AVFs, primary access patency rates between technical successes and failures at three and 6 months were 74.4 versus 61.9 % (p = 0.3) and 53.8 versus 23.8 % (p < 0.05), respectively. In AVGs, primary access patency rates between technical successes and failures at three and six months were 72.1 versus 53.9 % (p = 0.5) and 33.6 versus 38.5 % (p = 0.8), respectively. Transonic flow rates did not significantly differ among technically successful or failed outcomes at one or three months.ConclusionTechnical failures of PTA had a significant impact on access patency among AVFs with a trend toward poorer access patency within AVGs.

Does Technical Success of Angioplasty in Dysfunctional Hemodialysis Accesses Correlate with Access Patency?

International Nuclear Information System (INIS)

Sidhu, Arshdeep; Tan, Kong T.; Noel-Lamy, Maxime; Simons, Martin E.; Rajan, Dheeraj K.

2016-01-01

PurposeTo study if <30 % residual stenosis post angioplasty (PTA) correlates with primary access circuit patency, and if any variables predict technical success.Materials and MethodsA prospective observational study was performed between January 2009 and December 2012, wherein 76 patients underwent 154 PTA events in 56 prosthetic grafts (AVG) and 98 autogenous fistulas (AVF). Data collected included patient age, gender, lesion location and laterality, access type and location, number of prior interventions, and transonic flow rates pre- and postintervention. Impact of technical outcome on access patency was assessed. Univariate logistic regression was used to assess the impact of variables on technical success with significant factors assessed with a multiple variable model.ResultsTechnical success rates of PTA in AVFs and AVGs were 79.6 and 76.7 %, respectively. Technical failures of PTA were associated with an increased risk of patency loss among circuits with AVFs (p < 0.05), but not with AVGs (p = 0.7). In AVFs, primary access patency rates between technical successes and failures at three and 6 months were 74.4 versus 61.9 % (p = 0.3) and 53.8 versus 23.8 % (p < 0.05), respectively. In AVGs, primary access patency rates between technical successes and failures at three and six months were 72.1 versus 53.9 % (p = 0.5) and 33.6 versus 38.5 % (p = 0.8), respectively. Transonic flow rates did not significantly differ among technically successful or failed outcomes at one or three months.ConclusionTechnical failures of PTA had a significant impact on access patency among AVFs with a trend toward poorer access patency within AVGs.

OML-Highway within the framework of SELMAGIS

DEFF Research Database (Denmark)

Jensen, Steen Solvang; Becker, Thomas; Ketzel, Matthias

This report describes the OML-Highway model and its integration into SELMAGIS. The National Environmental Research Institute (NERI) has developed the OML-Highway model and Ingenieurbüro Lohmeyer from Germany has developed SELMAGIS. The OML-Highway model is able to calculate air pollution concentr...... concentration levels at receptor points along a highway road network, while SELMAGIS is a framework for calculating and representing air pollutant emissions and concentrations in a geographical information system (GIS)......This report describes the OML-Highway model and its integration into SELMAGIS. The National Environmental Research Institute (NERI) has developed the OML-Highway model and Ingenieurbüro Lohmeyer from Germany has developed SELMAGIS. The OML-Highway model is able to calculate air pollution...

Control of heavy loads at nuclear power plants: Resolution of Generic Technical Activity A-36. Technical report

International Nuclear Information System (INIS)

George, H.J.

1980-07-01

This report summarizes work performed by the NRC staff in the resolution of Generic Technical Activity A-36, Control of Heavy Loads Near Spent Fuel. Generic Technical Activity A-36 is one of the generic technical subjects designated as unresolved safety issues pursuant to Section 210 of the Energy Reorganization Act of 1974. The report describes the technical studies and evaluations performed by the NRC staff, the staff's guidelines based on these studies, and the staff's plans for implementaton of its technical guidelines

Technical knowledge and skills development in the informal sector in Kenya: The case of custom tailors

Science.gov (United States)

Apunda, Edwinah Amondi; de Klerk, Helena M.; Ogina, Teresa

2017-06-01

Custom tailors working in the informal sector in Nairobi, Kenya, mainly acquire technical skills through undertaking traditional apprenticeships (TAs). However, most of these tailors are semi-skilled, produce low-quality products and are often poorer than their formally trained counterparts. This qualitative case study explores the aspects of technical skills and knowledge which tailoring apprentices develop, and the factors which influence these outcomes. The findings show that apprentices do acquire basic technical skills for immediate application to ongoing tailoring activities (such as how to take body measurements, draft patterns, and cut, sew and finish constructed garments). However, apprentices do not acquire the technical knowledge that underpins the trade. Most master tailors who have completed TAs lack technical knowledge and have no access to technical skills upgrading. This perpetuates the cycle of basic and limited technical skills transfer to apprentices, poor performance and poverty among tailors. Both apprentices and master tailors expressed concern over knowledge limitations in TAs and a need to access further training to improve skills and acquire knowledge of the trade. The authors of this article argue that, technically and pedagogically, skilled master tailors are critical to improving training quality. Complementary training in theoretical knowledge is also important in improving apprentices' technical skills and understanding of the trade. Inclusion of TAs in government policy may help ensure sustainable improvement of skills.

Technical report writing today

CERN Document Server

Riordan, Daniel G

2014-01-01

"Technical Report Writing Today" provides thorough coverage of technical writing basics, techniques, and applications. Through a practical focus with varied examples and exercises, students internalize the skills necessary to produce clear and effective documents and reports. Project worksheets help students organize their thoughts and prepare for assignments, and focus boxes highlight key information and recent developments in technical communication. Extensive individual and collaborative exercises expose students to different kinds of technical writing problems and solutions. Annotated student examples - more than 100 in all - illustrate different writing styles and approaches to problems. Numerous short and long examples throughout the text demonstrate solutions for handling writing assignments in current career situations. The four-color artwork in the chapter on creating visuals keeps pace with contemporary workplace capabilities. The Tenth Edition offers the latest information on using electronic resum...

Technical basis document for internal dosimetry

CERN Document Server

Hickman, D P

1991-01-01

This document provides the technical basis for the Chem-Nuclear Geotech (Geotech) internal dosimetry program. Geotech policy describes the intentions of the company in complying with radiation protection standards and the as low as reasonably achievable (ALARA) program. It uses this policy and applicable protection standards to derive acceptable methods and levels of bioassay to assure compliance. The models and computational methods used are described in detail within this document. FR-om these models, dose- conversion factors and derived limits are computed. These computations are then verified using existing documentation and verification information or by demonstration of the calculations used to obtain the dose-conversion factors and derived limits. Recommendations for methods of optimizing the internal dosimetry program to provide effective monitoring and dose assessment for workers are provided in the last section of this document. This document is intended to be used in establishing an accredited dosi...

Internal design of technical systems under conditions of uncertainty

Energy Technology Data Exchange (ETDEWEB)

Krasnoshchekov, P S; Morozov, V V; Fedorov, V V

1982-03-01

An investigation is made of a model of internal design of a complex technical system in the presence of uncertain factors. The influence of an opponent on the design is examined. The concepts of hierarchical and balanced compatibility between the criteria of the designer, the opponent and the segregations functions are introduced and studied. The connection between the approach proposed and the methods of artificial intelligence is discussed. 5 references.

Technical specifications for the successful fabrication of laminated seismic isolation bearings

Energy Technology Data Exchange (ETDEWEB)

Kulak, R F [Argonne National Laboratory, Argonne, IL (United States)

1992-07-01

High damping steel-laminated elastomeric seismic isolation bearings are becoming a preferred device for isolating large buildings and structures. In the United States, the current reference design for the Advanced Liquid Metal Reactor uses laminated bearings for seismic isolation. These bearings are constructed from alternating layers of rubber and steel plates. They are typically designed for shear strains between 50 to 100 percent and expected to sustain two to three times these levels for beyond design basis loading considerations. The technical specifications used to procure these bearings are an important factor in assuring thatthe bearings meet the performance requirements of the design. The key aspects of the current version of the Technical Specifications are discussed in this paper. (author)

Technical Report Writing Today

DEFF Research Database (Denmark)

Riordan, Daniel G.

2014-01-01

Section 1: Technical Communication Basics (8 chapters on tech com, audiences, tech com process, tech com style, researching, designing pages, using visual aids, describing). Section 2: Technical Communication Applications (7 chapters on sets of instructions, informal reports and email, developing...

Technical executive’s organizational commitment at Malaysian Oil & Gas Industry

OpenAIRE

Firend, A.R; Binti Sofyan, P.

2016-01-01

This paper investigates the levels of organizational commitment among technical executive, identifies factors that influence organizational commitment in the Malaysian oil and gas industry, and examines the impact of organizational commitment on organizational performance. This research was conducted at Malaysia Marine and Heavy Engineering (MMHE). The framework adopted the three component-conceptualization of organizational commitment. Among the findings is that organizational commitment ten...

Technical Training: WBTechT offers online training

CERN Multimedia

Monique Duval

2005-01-01

CERN Technical Training 2005 The 2005 CERN Web-Based Technical Training portal is a computer-skills site offering multimedia learning. Visit http://www.course-source.net/sites/cern/ to self-register, consult the available programmes or request a course via EDH. A self-directed online course costs 50.- CHF for desktop applications and 90.- CHF for technical applications for three months' unlimited access. Visit the WBTechT portal or http://www.cern.ch/TechnicalTraining, and contact Technical.Training@cern.ch or your DTOs to find out more information. ENSEIGNEMENT TECHNIQUE TECHNICAL TRAINING Monique Duval 74924 technical.training@cern.ch

Technical Training: WBTechT offers online training

CERN Multimedia

Monique Duval

2005-01-01

CERN Technical Training 2005 The 2005 CERN Web-Based Technical Training (WBTechT) portal is a computer-skills site offering multimedia learning. Visit http://www.course-source.net/sites/cern/ to self-register, consult the available programmes or request a course via EDH. A self-directed online course costs 50.- CHF for desktop applications and 90.- CHF for technical applications for three months' unlimited access. Visit the WBTechT portal or http://www.cern.ch/TechnicalTraining, and contact Technical.Training@cern.ch or your DTO to find out more information. ENSEIGNEMENT TECHNIQUE TECHNICAL TRAINING Monique Duval 74924 technical.training@cern.ch

Net-Zero Energy Technical Shelter

DEFF Research Database (Denmark)

Zhang, Chen; Heiselberg, Per; Jensen, Rasmus Lund

2014-01-01

Technical shelters are the basic structures for storing electronic and technical equipment, and commonly used for telecommunication base station, windmill, gas station, etc. Due to their high internal heat load density and special operation schedule, they consume more energy than normal residential...... or commercial buildings. On the other hand, it is a big challenge to power the technical shelter in remote area where the grids are either not available or the expansion of grid is expensive. In order to minimize the energy consumption and obtain a reliable and cost-efficient power solution for technical...... shelter, this study will apply the net-zero energy concept into the technical shelter design. The energy conservation can be achieved by proper design of building envelop and optimization of the cooling strategies. Both experiments and numerical simulations are carried out to investigate the indoor...

Technical planning activity: Final report

Energy Technology Data Exchange (ETDEWEB)

1987-01-01

In April 1985, the US Department of Energy's (DOE's) Office of Fusion Energy commissioned the Technical Planning Activity (TPA). The purpose of this activity was to develop a technical planning methodology and prepare technical plans in support of the strategic and policy framework of the Magnetic Fusion Program Plan issued by DOE in February 1985. Although this report represents the views of only the US magnetic fusion community, it is international in scope in the sense that the technical plans contained herein describe the full scope of the tasks that are prerequisites for the commercialization of fusion energy. The TPA has developed a well-structured methodology that includes detailed definitions of technical issues, definitions of program areas and elements, statements of research and development objectives, identification of key decision points and milestones, and descriptions of facility requirements.

Technical planning activity: Final report

International Nuclear Information System (INIS)

1987-01-01

In April 1985, the US Department of Energy's (DOE's) Office of Fusion Energy commissioned the Technical Planning Activity (TPA). The purpose of this activity was to develop a technical planning methodology and prepare technical plans in support of the strategic and policy framework of the Magnetic Fusion Program Plan issued by DOE in February 1985. Although this report represents the views of only the US magnetic fusion community, it is international in scope in the sense that the technical plans contained herein describe the full scope of the tasks that are prerequisites for the commercialization of fusion energy. The TPA has developed a well-structured methodology that includes detailed definitions of technical issues, definitions of program areas and elements, statements of research and development objectives, identification of key decision points and milestones, and descriptions of facility requirements

Evaluation of Technical Efficiency in Indian Sugar Industry: An Application of Full Cumulative Data Envelopment Analysis

Directory of Open Access Journals (Sweden)

Sunil KUMAR

2012-05-01

Full Text Available This study focuses on the inter-temporal and inter-state variations in technical and scale efficiency levels of Indian sugar industry. In the first stage, full cumulative data envelopment analysis (FCDEA is used to derive efficiency scores for 12 major sugar producing states. The panel data truncated regression is employed in the second stage to assess the key factors explaining the observed variations in the efficiency levels. The results suggest that the extent of technical inefficiency in Indian sugar industry is about 35.5 percent per annum, and the observed technical inefficiency stems primarily due to managerial inefficiency rather scale inefficiency. Also, a precipitous decline in the level of technical efficiency has been noticed in the postreforms period relative to the level observed in the pre-reforms period. The availability of skilled labour and profitability have been found to be most significant determinants of technical efficiency in Indian sugar industry.

AN ESTIMATION OF TECHNICAL EFFICIENCY OF GARLIC PRODUCTION IN KHYBER PAKHTUNKHWA PAKISTAN

Directory of Open Access Journals (Sweden)

Nabeel Hussain

2014-04-01

Full Text Available This study was conducted to estimate the technical efficiency of farmers in garlic production in Khyber Pakhtunkhwa province, Pakistan. Data was randomly collected from 110 farmers using multistage sampling technique. Maximum likelihood estimation technique was used to estimate Cob-Douglas frontier production function. The analysis revealed that the estimated mean technical efficiency was 77 percent indicating that total output can be further increased with efficient use of resources and technology. The estimated gamma value was found to be 0.93 which shows 93% variation in garlic output due to inefficiency factors. The analysis further revealed that seed rate, tractor hours, fertilizer, FYM and weedicides were positive and statistically significant production factors. The results also show that age and education were statistically significant inefficiency factors, age having positive and education having negative relationship with the output of garlic. This study suggests that in order to increase the production of garlic by taking advantage of their high efficiency level, the government should invest in the research and development aspects for introducing good quality seeds to increase garlic productivity and should organize training programs to educate farmers about garlic production.

Basic technical parameters of magnetometers with ferromagnetic transducers and a method to define them

International Nuclear Information System (INIS)

Nagiello, Z.

1980-01-01

The basic technical parameters of magnetometers with ferromagnetic transducers and measuring methods to define these parameters have been discussed. Special attention was paid to factors which essentially affect the inaccuracy of these measuring instruments. (author)

A survey on technical efficiency, marketing and market structure of saffron crop, Iran

Directory of Open Access Journals (Sweden)

Mahmoud Shaban

2014-03-01

Full Text Available The current study attempted to determine technical efficiency as well as study the marketing and market structure of Saffarn crop in Iran. To access the research goals 140 farms, 25 retailers and 14 wholesalers randomly selected. The necessary data collected through interview and filling questionarie. Apart from this, some agricultural Expert from selected cities of Razavi province have been chosen to interview. To determine the market time-series data for the period of 1995-12 was used. To determine technical efficiency DEA method, to calculate marketing margins Digbi method and to find market structure concentration ratio and Herfindal index were used. The results indicated that, the average technical efficiency was 63.49 and minimum and maximum technical efficiency respectively 19.04 and 100, retailer margin mean of Saffron was more than wholesale margin mean and average marketing cost coefficient of Saffron was about 14.78. It means that, marketing factors share in final price is 14.78. Address to the results the Saffaran’s market structure is oligopoly.

Factors increasing the risk of inactivity among administrative, technical, and manual workers in Warszawa public institutions.

Science.gov (United States)

Biernat, Elżbieta

2015-01-01

The research aims to assess the level of physical activity among administrative, technical, and manual workers employed in Warszawa public institutions and to analyze the factors that increase the risk of failing to meet World Health Organization (WHO) recommendations. The study comprised 373 employees of randomly selected institutions. A short version of International Physical Activity Questionnaire (IPAQ) was applied. The correlation between the mean values of duration, days, MET-min/week of efforts, gender, and type of work was analyzed using the Tukey's honest significant difference (HSD) test, while the correlation between the level of physical activity and the socio-demographic characteristics was assessed with the Chi2 test. The strength of the relationship between socio-demographic characteristics and fulfilment of WHO standards was expressed by the odds ratio (OR) and 95% confidence interval (95% CI). The significance level was p = 0.05. High levels of physical activity were declared by 41.8% of the manual workers, 14.7% of the administration staff, and 7.3% of the technicians; 19%, 31.5% and 54.5%, respectively, reported low levels of physical activity. Factors determining the fulfilment of the WHO recommendations include: the nature of work (p = 0.003), education (p = 0.004), and income (p = 0.003). The risk of being inactive nearly doubles in the case of administration staff (31.5%) and increases more than 4 times in the case of technicians (54.5%). Respondents with secondary school education (31.6%) are exposed to a 3-fold higher risk of inactivity, while in respondents with higher education (37.2%), the level of the risk is 4-fold higher. Compared to those in the highest income group (23.4%), people who earn less (34.1%) are inactive almost twice as often. Urgent intervention is necessary in all studied groups: increased energy expenditure for recreation and locomotion, educational offers of employers to promote healthy lifestyle, management of

OSH technical reference manual

Energy Technology Data Exchange (ETDEWEB)

1993-11-01

In an evaluation of the Department of Energy (DOE) Occupational Safety and Health programs for government-owned contractor-operated (GOCO) activities, the Department of Labor`s Occupational Safety and Health Administration (OSHA) recommended a technical information exchange program. The intent was to share written safety and health programs, plans, training manuals, and materials within the entire DOE community. The OSH Technical Reference (OTR) helps support the secretary`s response to the OSHA finding by providing a one-stop resource and referral for technical information that relates to safe operations and practice. It also serves as a technical information exchange tool to reference DOE-wide materials pertinent to specific safety topics and, with some modification, as a training aid. The OTR bridges the gap between general safety documents and very specific requirements documents. It is tailored to the DOE community and incorporates DOE field experience.

Feasibility of commercial space manufacturing, production of pharmaceuticals. Volume 2: Technical analysis

Science.gov (United States)

1978-01-01

A technical analysis on the feasibility of commercial manufacturing of pharmaceuticals in space is presented. The method of obtaining pharmaceutical company involvement, laboratory results of the separation of serum proteins by the continuous flow electrophoresis process, the selection and study of candidate products, and their production requirements is described. The candidate products are antihemophilic factor, beta cells, erythropoietin, epidermal growth factor, alpha-1-antitrypsin and interferon. Production mass balances for antihemophelic factor, beta cells, and erythropoietin were compared for space versus ground operation. A conceptual description of a multiproduct processing system for space operation is discussed. Production requirements for epidermal growth factor of alpha-1-antitrypsin and interferon are presented.

The role of technical progress in the process of recalculating oil reserves

International Nuclear Information System (INIS)

Boulard, J.N.

1999-01-01

Contrary to the concept of resources (which is essentially a geological one), the notion of reserves designates the quantities that are technically and economically recoverable. Beyond the production-related effect, the reserves therefore evolve over time in accordance with numerous technical and economic parameters. Among these parameters, it can be seen that technical progress plays a considerable role throughout the process of converting resources into reserves, including progress in the identification, accessibility and processing of the resources, and improvements in economic viability. After having tackled the problem of measuring the 'technical progress effects' and citing examples, we demonstrate that the evolution in oil reserves is subject to three types of impact. These are a quantitative impact by significantly improving the recovery rates or making it possible to identify hitherto undetectable oil fields, a qualitative impact by widening the resource base thanks to the adoption of new categories of oil (in particular the so-called 'unconventional' oils) and by carrying out the gradual substitution between these resources of differing qualities. There is also a dynamic impact, through the acceleration of resource availability. Through these three approaches, technical progress makes makes it possible to ensure continuity in oil supply and contributes significantly to the recalculation of reserves. It therefore acts as a compensating factor, counterbalancing the progressive depletion of resources. (author)

Cost and technical efficiency of physician practices: a stochastic frontier approach using panel data.

Science.gov (United States)

Heimeshoff, Mareike; Schreyögg, Jonas; Kwietniewski, Lukas

2014-06-01

This is the first study to use stochastic frontier analysis to estimate both the technical and cost efficiency of physician practices. The analysis is based on panel data from 3,126 physician practices for the years 2006 through 2008. We specified the technical and cost frontiers as translog function, using the one-step approach of Battese and Coelli to detect factors that influence the efficiency of general practitioners and specialists. Variables that were not analyzed previously in this context (e.g., the degree of practice specialization) and a range of control variables such as a patients' case-mix were included in the estimation. Our results suggest that it is important to investigate both technical and cost efficiency, as results may depend on the type of efficiency analyzed. For example, the technical efficiency of group practices was significantly higher than that of solo practices, whereas the results for cost efficiency differed. This may be due to indivisibilities in expensive technical equipment, which can lead to different types of health care services being provided by different practice types (i.e., with group practices using more expensive inputs, leading to higher costs per case despite these practices being technically more efficient). Other practice characteristics such as participation in disease management programs show the same impact throughout both cost and technical efficiency: participation in disease management programs led to an increase in both, technical and cost efficiency, and may also have had positive effects on the quality of care. Future studies should take quality-related issues into account.

The logic of Technical Standardisation

DEFF Research Database (Denmark)

Nedergaard, Peter

In this paper technical standardisation is understood and explained in a model where economic analysis is coupled with an analysis of the political system as proposed in rational choice theory. The aim is to answer both the question why various countries (e.g. the United States versus European...... countries) let either the market or public intervention determine the mode of technical standardisation and the possible implications of these two ways of organizing technical standardisation from an economic and a political point of view. Based upon the analysis of the paper a couple of general policy...... recommendations are made concerning the mode of technical standardisation....

Technical efficiency of goat farming in Turkey: a case study of Isparta province

Directory of Open Access Journals (Sweden)

Mevlüt Gül

2016-06-01

Full Text Available ABSTRACT This study estimates the technical efficiency of goat rearing in the province of Isparta in Turkey using Data Envelopment Analysis (DEA. The data used were collected from 92 goat farmers using the stratified sampling method by means of a questionnaire. The technical efficiency of the goat farming varied widely between 0.13 and 1.00. The mean efficiency of 92 goat farms was calculated to be 0.44 and 0.66 for constant and variable returns to scale assumptions, respectively. The greatest slacks were in feedstuff concentrates and labour used. The most significant factors affecting efficiency of goat production were farmer experience, cooperative membership, milk yield per goat, and family and hired labour. Technical efficiency should be improved by providing farmers with well-organised education, an extension program, and research and development programs on goat rearing.

How to be an Effective Technical Writer?

Directory of Open Access Journals (Sweden)

M Solaiman Ali

2012-07-01

Full Text Available Abstract--This paper has focused on technical writing as a skill for engineers. It has sought to define technical writing and throw light on the content and technique of writing the various components of successful technical reports (for example, articles, papers, or research reports, such as theses and dissertations. Then, it has highlighted other special features and principles of effective technical writing. The material in this paper is divided into seven major parts. Part 1 (Technical writing for engineers stresses that a successful engineering career requires strong writing skills. Part 2 (How to write the major sections or elements of a report describes the techniques of writing the abstract, introduction, literature review, procedure/methods & materials, results, discussion, conclusion, and recommendations. Part 3 (Special features of technical writing brings into focus some of the special features of technical writing such as tables & graphs in the text, graphics in instructions, team writing, ethics (plagiarism, document sources, three citation styles and IEEE reference style. Part 4 (Technical usage deals with writing abbreviations, initialisms and acronyms, numbers, units of measurement, and equations.Part 5 (Technical style highlights the imperative writing style and other features of technical writing such as the use of active and passive voices, plain vs. complex syntax, avoiding redundant or superfluous expressions, and vague generalities, using words or expressions with visual impact, the past tense to describe experimental work, the present tense to describe hypotheses, principles, theories and truths, and breaking up the text of the report into short sections. Part 6 (Document specifications emphasizes the technical writer’s need to conform to such document specifications as word count, format, font, number of words per line of text imposed. Part 7 (Reader-friendly technical writing suggests choosing the varied writing modes

Mechanical Engineering Department technical abstracts

International Nuclear Information System (INIS)

Denney, R.M.

1982-01-01

The Mechanical Engineering Department publishes listings of technical abstracts twice a year to inform readers of the broad range of technical activities in the Department, and to promote an exchange of ideas. Details of the work covered by an abstract may be obtained by contacting the author(s). Overall information about current activities of each of the Department's seven divisions precedes the technical abstracts

Technical Services on the Net: Where Are We Now? A Comparative Study of Sixty Web Sites of Academic Libraries

Science.gov (United States)

Wang, Jianrong; Gao, Vera

2004-01-01

This study examines sixty academic libraries' Web sites and finds that 80 percent of them do not have a technical services' homepage. Data reveal that institution's status might be a factor in whether a library has such a page. Further content analysis suggests there is an appropriate and useful public service role that technical services…

Balancing human and technical reliability in the design of advanced nuclear reactors

International Nuclear Information System (INIS)

Papin, Bernard

2011-01-01

Highlights: ► Human factors exigencies are often overseen during the early design phases of NPP. ► Optimization of reactors safety is only based on technical reliability considerations. ► The search for more technical reliability often leads to more system complexity. ► System complexity is a major contributor to the operator's poor performance. ► Our method enables to assess plant complexity and it's impact on human performance. - Abstract: The strong influence of human factors (HF) on the safety of nuclear facilities is nowadays recognised and the designers are now enforced to consider HF requirements in the design of new facilities. Yet, this consideration of human factors requirements is still more or less restricted to the latest phases of the projects, essentially for the design of human-system interfaces (HSI's) and control rooms, although the design options influencing at most the human performance in operation are indeed fixed during the very early phases of the new reactors projects. The main reason of this late consideration of HF is that there exist few methods and models for anticipating the influence of fundamental design options on the future performance of operation teams. This paper describes a set of new tools permitting (i) determination of the impact of the fundamental process design options on the future activity of the operation teams and (ii) assessment of the influence of these operational constraints on teams performance. These tools are intended to guide the design of future 4th generation (GEN4) reactors, within the frame of a global risk-informed design approach, considering technical and human reliability exigencies in a balanced way.

Technical and allocative inefficiencies and factor elasticities of substitution. An analysis of energy waste in Iran's manufacturing

Energy Technology Data Exchange (ETDEWEB)

Khiabani, Nasser; Hasani, Karim [Department of Economics, Institute for Management and Planning Studies, Mokhtar Asgari Str.10, 19395, Tehran (Iran, Islamic Republic of)

2010-09-15

Ignoring technical and allocative inefficiencies or embedding one of them alone in a system of input demands may result in biased elasticities. We consider a comprehensive model including technical inefficiency (in input and output forms) and allocative inefficiency and apply it to panel data from Iran's manufacturing sector. The results show that the presence of both inefficiencies affects the computed elasticities of demand and substitution. Moreover, in spite of current waste of energy in Iran's manufacturing, the elimination of environmental constraints will prompt the manufacturing firms to increase the utilization of energy relative to both capital and labor. (author)

RNA-seq: technical variability and sampling

Science.gov (United States)

2011-01-01

Background RNA-seq is revolutionizing the way we study transcriptomes. mRNA can be surveyed without prior knowledge of gene transcripts. Alternative splicing of transcript isoforms and the identification of previously unknown exons are being reported. Initial reports of differences in exon usage, and splicing between samples as well as quantitative differences among samples are beginning to surface. Biological variation has been reported to be larger than technical variation. In addition, technical variation has been reported to be in line with expectations due to random sampling. However, strategies for dealing with technical variation will differ depending on the magnitude. The size of technical variance, and the role of sampling are examined in this manuscript. Results In this study three independent Solexa/Illumina experiments containing technical replicates are analyzed. When coverage is low, large disagreements between technical replicates are apparent. Exon detection between technical replicates is highly variable when the coverage is less than 5 reads per nucleotide and estimates of gene expression are more likely to disagree when coverage is low. Although large disagreements in the estimates of expression are observed at all levels of coverage. Conclusions Technical variability is too high to ignore. Technical variability results in inconsistent detection of exons at low levels of coverage. Further, the estimate of the relative abundance of a transcript can substantially disagree, even when coverage levels are high. This may be due to the low sampling fraction and if so, it will persist as an issue needing to be addressed in experimental design even as the next wave of technology produces larger numbers of reads. We provide practical recommendations for dealing with the technical variability, without dramatic cost increases. PMID:21645359

Who recognises technical standards in TTIP?

NARCIS (Netherlands)

Purnhagen, K.

2018-01-01

Current political discussions on the relationship of technical standards to the Transatlantic, Trade and Investment Partnership (TTIP) concern the question whether TTIP can provide a transatlantic level playing field for technical standards, and whether this will negatively affect technical

A mixed methods investigation into the use of non-technical skills by community and hospital pharmacists.

Science.gov (United States)

Irwin, A; Weidmann, A E

2015-01-01

Non-technical skills refer to the social and cognitive factors that may influence efficient and safe job performance. Non-technical skills are an important element of patient safety in a variety of health care disciplines, including surgery, anesthesia and nursing. However, the use of non-technical skills in pharmacy practice has not yet been fully assessed. To examine attitudes toward, and use of, non-technical skills by pharmacy personnel. A mixed methods approach was used: An attitude survey explored pharmacy personnel attitudes towards non-technical skills and inter-professional collaboration, with community and hospital pharmacy staff (n = 62). Qualitative interviews were then conducted using the critical incident technique, with community pharmacists (n = 11). The survey results demonstrated differences in the opinions of community and hospital pharmacists on three non-technical skill constructs: team structure, mutual support, and situation monitoring, with community pharmacists reporting significantly more positive attitudes about all three constructs. Both groups reported low levels of collaboration with primary care physicians. The interviews identified five non-technical skills as key elements of successful pharmacist performance from the interview transcripts: teamwork; leadership; task management; situation awareness; decision-making. The survey and interviews identified the non-technical skills that are important to pharmacists. This represents the first step towards the development of a behavioral rating system for training purposes that could potentially improve the non-technical skills of pharmacists and enhance patient safety. Copyright © 2015 Elsevier Inc. All rights reserved.

Flying in Clear Skies: Technical Arguments Influencing ANAC Regulations

Directory of Open Access Journals (Sweden)

Marcello Fragano Baird

2014-08-01

Full Text Available Regulatory agencies possess the particularity of being controlled by non-elected politicians whose power is derived from delegations made by incumbent powers. There exists, however, a concern with the creation of institutional mechanisms that permit public participation, thus guaranteeing greater democratization and social control of the regulatory process. One of these participatory mechanisms is the public hearing, which was not given much attention by Brazilian literature on lobbying and interest groups. This article seeks to contribute to fill this gap, focusing on the impact of interest groups acting upon the National Civil Aviation Agency, ANAC. Analyzing comments sent to the public hearings, we identified the commentators and the intensity of their participation, the impact of their efforts as measured by the rate of comment incorporation, and we explained why some comments are incorporated and others are not. We organized an original data base of the comments made at all ANAC public hearings between 2007 and May 2012. We analyzed 518 comments concerning 48 regulations. To test participant influence, we classified the comments by degree of technicality, economic or legal argument, authorship, and request for regulation. To understand the incorporation process, we used regression models through which we presented evidence that a comment's incorporation is directly related to its degree of technicality. Technical comments, which effectively subsidize the resolution, have a higher chance of being incorporated. Even more than corporate power or its force of participation, the technical quality proved to be the main factor for comment incorporation.

Assessment of technical risks

Energy Technology Data Exchange (ETDEWEB)

Jaeger, T A [Bundesanstalt fuer Materialpruefung, Berlin (Germany, F.R.)

1978-01-01

The safety of technical systems is so difficult to assess because the concept 'risk' contains technical-scientific factors as well as components of individual and social psychology. Immediate or short-term hazards of human life as i.e. caused by the operation of industrial plants and mediate and thus long-term hazards have to be distinguished. Characteristic for the second hazard groups is the great time-lag before the effect takes place. Thus a causal relationship can be recognized only late and not definitely. Even when the causes have been obviated the effects still show. The development of a systems-analytical model as a basis of decisive processes for the introduction of highly endangered large-scale technologies seems particularly difficult. A starting point for the quantification of the risk can still be seen in the product of the probability of realization and the extent of the damage. Public opinion, however, does not base its evaluations on an objective concept of risk but tends to have an attitude of aversion against great and disastrous accidents. On the other hand, plenty of slight accidents are accepted much more easily, even when the amount of deadly victims from accidents reaches dimensions beyond those of the rare large-scale accidents. Here, mostly the damage possible but not the probability of its occurence is seen, let alone the general use of the new technology. The value of the mathematical models for estimating risks is mainly due to the fact that they are able to clear up decisions.

Technical innovation and policy of scientific technique

International Nuclear Information System (INIS)

Song, Wi Jin

2006-04-01

This book deals with system of innovation and policy of scientific technology : main view point and Topic, technical politics and technical learning, spread of internet and change of structure in information and communications industry, characteristic of technical innovation of software as open source, transfer into national innovation system, change of activity of public scientific technology, theory on technical innovation, evolution of technical innovation policy and participation of civil.

Talent management : Retaining and managing technical specialists in a technical career

OpenAIRE

Brunila, Alexandra; Baedecke Yllner, Emelie

2013-01-01

The purpose of this thesis is to investigate talent management and how companies should work with talent management in order to retain and manage technical specialists in a technical career. Talent management is found to be important for modern organizations because of the advent of the knowledge economy, new generations entering the workforce and the need for businesses to become more strategic and competitive, which implies new ways of managing human capital. Furthermore, talent management ...

Identifying factors affecting optimal management of agricultural water

Directory of Open Access Journals (Sweden)

Masoud Samian

2015-01-01

In addition to quantitative methodology such as descriptive statistics and factor analysis a qualitative methodology was employed for dynamic simulation among variables through Vensim software. In this study, the factor analysis technique was used through the Kaiser-Meyer-Olkin (KMO and Bartlett tests. From the results, four key elements were identified as factors affecting the optimal management of agricultural water in Hamedan area. These factors were institutional and legal factors, technical and knowledge factors, economic factors and social factors.

Towards common technical standards

International Nuclear Information System (INIS)

Rahmat, H.; Suardi, A.R.

1993-01-01

In 1989, PETRONAS launched its Total Quality Management (TQM) program. In the same year the decision was taken by the PETRONAS Management to introduce common technical standards group wide. These standards apply to the design, construction, operation and maintenance of all PETRONAS installations in the upstream, downstream and petrochemical sectors. The introduction of common company standards is seen as part of an overall technical management system, which is an integral part of Total Quality Management. The Engineering and Safety Unit in the PETRONAS Central Office in Kuala Lumpur has been charged with the task of putting in place a set of technical standards throughout PETRONAS and its operating units

Pedagogical characteristics of the systems for assessing the technical and tactical skills of qualified volleyball players

Directory of Open Access Journals (Sweden)

Мykhailo Oliinyk

2017-12-01

Full Text Available Purpose: on the basis of the analysis of the special literature and their own experimental studies, to determine the characteristics of the systems for assessing the technical and tactical skills of qualified volleyball players. Material & Methods: study was conducted on the basis of the material of the national team of Zaporozhye State Medical University on volleyball. Analysis and generalization of the data of scientific and methodical literature are used; registration, analysis and interpretation of indicators of technical and tactical actions of qualified volleyball players in training and competitive processes; pedagogical observations; algorithms for calculating the quantitative and qualitative indicators of technical and tactical skill in volleyball; methods of mathematical statistics. Results: data on the existence of a strong statistical relationship between the systems of assessment of technical and tactical skills of qualified volleyball players, taking into account the specificity of the game role. Conclusion: shows the specifics of the application of various systems for assessing the technical and tactical skills of qualified volleyball players, taking into account the factors of the game role, noted the methodological features of special analysis and interpretation of indicators of technical and tactical actions in the adversarial process.

Technical specifications for the successful fabrication of laminated seismic isolation bearings

International Nuclear Information System (INIS)

Kulak, R.F.

1992-01-01

High damping laminated elastomeric bearings are becoming one of the preferred devices for isolating large buildings and structures. IN the United States, the current reference design for the Advanced Liquid Metal Reactor uses laminated bearings for seismic isolation. These bearing are constructed from alternating layers of rubber and steel plates. They are typically designed for shear strains between 50 to 100 percent and expected to sustain two to three times these levels for beyond design basis loading considerations. The technical specifications used to procure these bearings are an important factor in assuring that the bearings that are installed under nuclear structures meet the performance requirements of the design. The key aspects of the current version of the Technical Specifications are discussed in this paper

Technical specifications for the successful fabrication of laminated seismic isolation bearings

International Nuclear Information System (INIS)

Kulak, R.F.

1992-01-01

High damping steel-laminated elastomeric seismic isolation bearings are becoming a preferred device for isolating large buildings and structures. In the United States, the current reference design for the Advanced Liquid Metal Reactor uses laminated bearings for seismic isolation. These bearings are constructed from alternating layers of rubber and steel plates. They are typically designed for shear strains between 50 to 100 percent and expected to sustain two to three times these levels for beyond design basis loading considerations. The technical specifications used to procure these bearings are an important factor in assuring that the bearings meet the performance requirements of the design. The key aspects of the current version of the Technical Specifications are discussed in this paper. (author)

El Salvador - Formal Technical Education

Data.gov (United States)

Millennium Challenge Corporation — With a budget of nearly $20 million, the Formal Technical Education Sub-Activity was designed to strengthen technical and vocational educational institutions in the...

Predictors of Attitudes Toward Non-Technical Skills in Farming.

Science.gov (United States)

Irwin, Amy; Poots, Jill

2018-01-01

Farming is a high-risk sector with up to 170,000 worldwide fatalities reported per year; it is therefore vital to identify methods of mitigating the dangers of this industry. Research within high-risk industries, such as aviation, shipping, and agriculture, has identified the importance of non-technical skills (NTS) in maintaining effective, safe performance and reducing error and injury. However, there is a lack of research evaluating factors that may contribute to NTS attitudes and behaviors. As a first step to address this literature gap, the current study evaluated a range of individual and environmental factors as potential predictors of attitudes toward NTS in agriculture. A sample of 170 farmers from within the United Kingdom and Ireland were surveyed using an online questionnaire. The questionnaire included measures of personality, stress, attitudes toward safety (safety climate, motivation, and risk), environmental stressors (workload, work-life imbalance), and non-technical skills (team and lone worker). Attitudes toward safety climate, compliance, and motivation showed a significant association with both team-based and lone worker NTS. Conscientiousness correlated positively with the majority of the NTS elements. Multiple regression analysis indicated neuroticism and conscientiousness demonstrated capacity to predict NTS attitudes. Concerns about costs and equipment, attitudes toward safety climate, and safety motivation were also found to be significant predictors of NTS attitudes. The results indicate the utility of individual characteristics and environmental factors when predicting farming NTS attitudes. As a result, these elements could be important when evaluating engagement with NTS and developing NTS training initiatives in agriculture.

Would Engineers Need Non-technical Skills or Non-technical Competences or Both?

Directory of Open Access Journals (Sweden)

Velli Parts

2013-04-01

Full Text Available Normal 0 21 MicrosoftInternetExplorer4 Two main competence approaches are under the discussion. There is evidence that graduates do not fully perceive and/or underestimate the influence of non-technical competences on their employability. An understanding of the necessity of non-technical competences develops after a graduate has already been hired and is working at that job.

Ageing management technical information investigations

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-08-15

In February 2013, there are 50 units of commercial nuclear power plants (NPPs) in Japan. We enter into a period that 20 units of them are operating for more than 30 years. Currently, regulation imposes utilities to conduct ageing technical evaluations of each unit before operation of 30 years from the commissioning, to develop the long term maintenance management policy for next 10 years and to submit to the regulatory authority the policy with the report on ageing management technical evaluation (AMTE) for each NPP. It is necessary for regulatory side to develop technical information bases incorporating latest technical knowledge as operating experiences in domestic and abroad on ageing of the plants necessary to conduct reviews of AMTE for each unit. Based on these standpoints, technical information bases investigations have been conducted from the viewpoints of material degradation of ageing NPPs. In order to develop scientific regulator judgment bases related to ageing management (AM) and long-term operation (LTO), investigations on latest information on ageing management in domestic and abroad are conducted and a set of documents including technical evaluation review manuals necessary to conduct AMTE are prepared. To utilize the results of the investigations for ageing technical evaluation, database including latest information related to AM and LTO are developed, ran and operated. In addition, investigations related to Fugen nuclear plant, under decommissioning plants, investigations on mechanism of stress corrosion cracking (SCC), thermal ageing and preventive technologies for SCC, detection and diagnosis technology for ageing degradation and condition monitoring technology are performed to validate and confirm effectiveness of the technologies. (author)

STRUCTURAL AND FUNCTIONAL MODEL OF FORMING INFORMATIONAL COMPETENCE OF TECHNICAL UNIVERSITY STUDENTS

Directory of Open Access Journals (Sweden)

Taras Ostapchuk

2016-11-01

Full Text Available The article elaborates and analyses the structural and functional model of formation of information competence of technical university students. The system and mutual relationships between its elements are revealed. It is found out that the presence of the target structure of the proposed model, process and result-evaluative blocks ensure its functioning and the opportunity to optimize the learning process for technical school students’ information training. It is established that the formation of technical university students’ information competence based on components such as motivational value, as well as operational activity, cognitive, and reflexive one. These criteria (motivation, operational and activity, cognitive, reflective, indexes and levels (reproductive, technologized, constructive forming technical university students’ information competence are disclosed. Expediency of complex organizational and educational conditions in the stages of information competence is justified. The complex organizational and pedagogical conditions include: orientation in the organization and implementation of class work for technical university students’ positive value treatment; the issue of forming professionalism; informatization of educational and socio-cultural environment of higher technical educational institutions; orientation of technical university students’ training to the demands of European and international standards on information competence as a factor in the formation of competitiveness at the labor market; introducing a special course curriculum that will provide competence formation due to the use of information technology in professional activities. Forms (lecture, visualization, problem lecture, combined lecture, scientific online conference, recitals, excursions, etc., tools (computer lab, multimedia projector, interactive whiteboard, multimedia technology (audio, video, the Internet technologies; social networks, etc

Technical functions : a drawbridge between the intentional and structural nature of technical artefacts

NARCIS (Netherlands)

Vermaas, P.E.; Houkes, W.N.

2006-01-01

In this paper we present an action-theoretic account of artefact using and designing and describe our ICE-theory of function ascriptions to technical artefacts. By means of this account and theory we analyse the thesis of the dual nature of technical artefacts according to which descriptions of

Sia la luce origini e destino del nostro universo

CERN Document Server

Longair, Malcolm S

1998-01-01

Una nuova visione dell'universo ; nascita ed evoluzione delle stelle ; quando muore una stella ; la "quasar connection" ; pulsar & co. ; gli inquietanti buchi neri ; le galassie e la nascita dell'universo.

BWR feedwater nozzle and control rod drive return line nozzle cracking: resolution of generic technical activity A-10. Technical report

International Nuclear Information System (INIS)

Snaider, R.

1980-11-01

This report summarizes work performed by the NRC staff in the resolution of Generic Technical Activity A-10, 'BWR Nozzle Cracking'. Generic Technical Activity A-10 is one of the generic technical subjects designated as 'unresolved safety issues' pursuant to Section 210 of the Energy Reorganization Act of 1974. The report describes the technical issues, the technical studies and analyses performed by the General Electric Company and the NRC staff, the staff's technical positions based on these studies, and the staff's plans for continued implementation of its technical positions. It also provides information for further work to resolve the non-destructive examination issue

Technology of perfection to technical tactical preparedness of skilled footballers in microcycles of competition period.

Directory of Open Access Journals (Sweden)

Doroshenko E.Y.

2012-04-01

Full Text Available Technology of perfection to technical tactical to preparedness of skilled footballers in the microcycles of preparation of competition process is considered. It is shown that for development of this technology key positions of general theory of preparation of sportsmen are used in Olympic and professional sport and technical tactical actions of players taking into account the internal and external parameters of the physical loading. Information of training process of footballers of youth composition of command «Metallurgist» (Zaporozhia is utillized in research. It is analysed and generalized information of complex scientific group. The program of perfection of technical and tactical preparedness is developed. It is set that the use of this program will allow to optimize individual, group and command technical tactical preparedness of skilled footballers on the basis of account of parameters of playing actions and factors, детерминирующих a physical capacity.

Technical aspects of ageing for long-term operation

International Nuclear Information System (INIS)

2003-01-01

components and structures even for a longer time of operation. However, it may be difficult to find technical expertise to support certain equipment in the future. In other areas like instrumentation and control (I and C) more drastic changes have taken place in the whole technology. A large number of nuclear power plants have already or will change their equipment to more modern I and C technology. A plant specific ageing management programme is much more challenging in the cases where licensees are the main source of information (because the original designer and manufacturers are already out of business) in comparison to larger series plants built with a reliable technical infrastructure still active on the market. Exceptions may exist where licensees have developed in-house capability in place of the original designer. The necessary elements for plant ageing management are: - Knowledge of ageing related damage mechanisms including benchmarking of the consequences of damage mechanisms into macroscopic behaviour of materials and structures under applicable conditions; - Predictive models to extrapolate behaviour of systems, structures or components up to a defined time; - Qualified methods for detection and surveillance of ageing degradation; - Qualified mitigation measures; - Reliable plant documentation; - Availability of technical service and knowledge base. Those items are detailed in the report. The safe and reliable operation of light water reactors has been proven for almost 30 years. It has been demonstrated that even for components with high field of radiation the access for repair or replacement methods is satisfactory. Although some serious damage mechanisms have limited the lifetime of some components, repair or replacement could be performed without excessive consequence on plants availability. In view of the general technical experience the factor of extrapolation with respect to time or usage are a factor of two or less if one considers operating times

Transformation of technical infrastructure

DEFF Research Database (Denmark)

Nielsen, Susanne Balslev

1998-01-01

article about the need of new planning forums in order to initiate transformations with in management of large technical systems for energy, waste and water supply.......article about the need of new planning forums in order to initiate transformations with in management of large technical systems for energy, waste and water supply....

TRANSLATING SERVICE TECHNICAL PROSE

African Journals Online (AJOL)

language. The Application of Technical Service. Prose. To form a good idea of the appl ication .... cost lives. In this particular domain, translators must have a sound technical ... These semantic ... another language and often, in doing so, changing its meaning. The words ..... He will hand out tasks to each translator and after.

Technical Training for Managers.

Science.gov (United States)

Haverland, Edgar M.

The question has arisen as to what kind of information a manager without extensive technical training needs to learn to supervise effectively. For example, the Nike Hercules fire control platoon leader, usually an officer in his first active duty assignment, seldom has had extensive technical training. Yet he is responsibile for the…

Technical Manual. The ACT®

Science.gov (United States)

ACT, Inc., 2014

2014-01-01

This manual contains technical information about the ACT® college readiness assessment. The principal purpose of this manual is to document the technical characteristics of the ACT in light of its intended purposes. ACT regularly conducts research as part of the ongoing formative evaluation of its programs. The research is intended to ensure that…

49 CFR 845.22 - Technical panel.

Science.gov (United States)

2010-10-01

... 49 Transportation 7 2010-10-01 2010-10-01 false Technical panel. 845.22 Section 845.22... Technical panel. The Director, Bureau of Accident Investigation, or the Director, Bureau of Field Operations, shall designate members of the Board's technical staff to participate in the hearing and initially...

48 CFR 12.211 - Technical data.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Technical data. 12.211... ACQUISITION OF COMMERCIAL ITEMS Special Requirements for the Acquisition of Commercial Items 12.211 Technical data. Except as provided by agency-specific statutes, the Government shall acquire only the technical...

48 CFR 212.211 - Technical data.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Technical data. 212.211 Section 212.211 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM, DEPARTMENT... Acquisition of Commercial Items 212.211 Technical data. The DoD policy for acquiring technical data for...

7 CFR 3430.55 - Technical reporting.

Science.gov (United States)

2010-01-01

... required to submit other technical reports or submit the CRIS reports more frequently than annually... 7 Agriculture 15 2010-01-01 2010-01-01 false Technical reporting. 3430.55 Section 3430.55... ASSISTANCE PROGRAMS-GENERAL AWARD ADMINISTRATIVE PROVISIONS Post-Award and Closeout § 3430.55 Technical...

Quality- a Factor of Management in Road Transport of Goods

Directory of Open Access Journals (Sweden)

Livij Jakomin

2012-10-01

Full Text Available Providing services on a quality level is an important factorof management in the trade rivalry for the control over the market.The factors affecting quality comprise technical factors andoperational and organisational ones. The technical factors includethe choice, the due care and maintenance of the vehicle.The operational and organisational factors are the quality offer,performing the transport service, the response in case of action,and the information efficiency.The necessity to control the total quality management is theresponsibility of the management. All staff members must participatein the improvement of quality management in their particularworking environment. Improved quality managementprovides for a higher safety of business operation and jobs, resultingin enhanced social security, which is gaining importancein mutual relations.

How to be an Effective Technical Writer?

OpenAIRE

M Solaiman Ali; Dheya Al-Othmany

2012-01-01

Abstract--This paper has focused on technical writing as a skill for engineers. It has sought to define technical writing and throw light on the content and technique of writing the various components of successful technical reports (for example, articles, papers, or research reports, such as theses and dissertations). Then, it has highlighted other special features and principles of effective technical writing. The material in this paper is divided into seven major parts. Part 1 (Technical w...

The Technical Student Programme draws Norwegians

CERN Multimedia

2005-01-01

Erik Hejne, second from left, Chairman of the Technical Students Committee, and Jens Vigen, who is concerned spefically with Norwegian students at CERN, with some of the Norwegian technical students who arrived at CERN in spring 2005, together with their teachers. From mid-April, CERN's PH and IT Departments are hosting ten Norwegian students from Bergen University College, the Sør-Trøndelag University College and the University of Science and Technology in Trondheim to take part in the Laboratory's Technical Student Programme. The Technical Student Programme is open to students of universities and technical higher education establishments in the Member States who, in the course of their studies, are required to complete a period of professional training in industry or in a laboratory. Around 70 Technical Students come to work at CERN each year. Selected by a committee, they spend between six months and one year with the Organization. The programme is funded by CERN. However, once the Laboratory's quota of...

Ripples and Breaks: Reflecting on Learning Ecologies in Career and Technical Education

Science.gov (United States)

Jocson, Korina M.

2016-01-01

In this paper, the author reflects on a year-long ethnography to point out contextual factors situated in career and technical education (CTE) and specifically how a CTE teacher and a university researcher shaped learning opportunities to support students' interests in the arts, technology, and multimedia communications. The discussion arched by a…

Evaluating the technical aspects of mixed waste treatment technologies

International Nuclear Information System (INIS)

Bagaasen, L.M.; Scott, P.A.

1992-10-01

This report discusses treatment of mixed wastes which is thought to be more complicated than treatment of either hazardous or radioactive wastes. In fact, the treatment itself is no more complicated: however, the regulations that define acceptability of the final waste disposal system are significantly more entangled, and sometimes in apparent conflict. This session explores the factors that influence the choice of waste treatment technologies, and expands on some of the limitations to their application. The objective of the presentation is to describe the technical factors that influence potential treatment processes and the ramifications associated with particular selections (for example, the generation of secondary waste streams). These collectively provide a framework for making informed treatment process selections

Technical and economic factors in the planning of a geothermal power station

Energy Technology Data Exchange (ETDEWEB)

Chierici, A

1962-01-01

The general director of the Larderello Society in Italy reported the results of investigations concerning technical advances. Analysis of geothermal vapor for temperature, pressure, and load, reveals characteristics of the underground system. As an example, the thermodynamic characteristics of a borehole isolated from the actual field being exploited are presented. Also, the determination of the content of non-condensable gases is important. An equation is presented which describes a decrease in non-condensable gases as a function of pressure load. At Larderello the pressure of utilization of the vapor is about 5 atm. A schematic presentation of three types of steam turbines is given. The first, a simple plant with turbines with free discharge, is suitable for exploitation in developing countries. The third type, which has direct vapor condensation adapted to modern requirements, is used at Larderello. The three types are compared by cost and machinery required. Nine figures are provided.

Mechanical Engineering Department. Technical review

Energy Technology Data Exchange (ETDEWEB)

Simecka, W.B.; Condouris, R.A.; Talaber, C. (eds.)

1980-01-01

The Mechanical Engineering Department Technical Review is published to (1) inform the readers of various technical activities within the Department, (2) promote exchange of ideas, and (3) give credit to the personnel who are achieving the results. The report is formatted into two parts: technical achievements and publication abstracts. The first is divided into eight sections, one for each Division in the Department providing the reader with the names of the personnel and the Division accomplishing the work.

Mechanical engineering department technical review

International Nuclear Information System (INIS)

Carr, R.B.; Denney, R.M.

1981-01-01

The Mechanical Engineering Department Technical Review is published to: (1) inform the readers of various technical activities within the department, (2) promote exchange of ideas, and (3) give credit to the personnel who are achieving the results. The report is formatted into two parts: technical acievements and publication abstracts. The first is divided into eight sections, one for each division in the department providing the reader with the names of the personnel and the division accomplishing the work

Mechanical Engineering Department Technical Review

International Nuclear Information System (INIS)

Carr, R.B.; Denney, R.M.

1981-01-01

The Mechanical Engineering Department Technical Review is published to inform readers of various technical activities within the Department, promote exchange of ideas, and give credit to personnel who are achieving the results. The report is presented in two parts: technical achievements and publication abstracts. The first is divided into seven sections, each of which reports on an engineering division and its specific activities related to nuclear tests, nuclear explosives, weapons, energy systems, engineering sciences, magnetic fusion, and materials fabrication

TECHNICAL CULTURE AND HUMAN AXJOSPHERE

OpenAIRE

­Krystyna Chałas

2014-01-01

Technical culture is the value of each historical period. It is the subject of the ongoing development. While it is a value which is associated with different categories of values, mainly material, cognitive, social. Between culture and these three categories of values ​ there is a cognitive effect. Technical culture determines the quality of human axjosphere. The aim of this study is to show the relationships and dependencies between technical culture and the structures in which a person liv...

Mechanical Engineering Department. Technical review

International Nuclear Information System (INIS)

Simecka, W.B.; Condouris, R.A.; Talaber, C.

1980-01-01

The Mechanical Engineering Department Technical Review is published to (1) inform the readers of various technical activities within the Department, (2) promote exchange of ideas, and (3) give credit to the personnel who are achieving the results. The report is formatted into two parts: technical achievements and publication abstracts. The first is divided into eight sections, one for each Division in the Department providing the reader with the names of the personnel and the Division accomplishing the work

Developing Technical Skill Assessments

Science.gov (United States)

Hyslop, Alisha

2009-01-01

One of the biggest challenges facing the career and technical education (CTE) community as it works to implement the 2006 Perkins Act is responding to more rigorous requirements for reporting on CTE students' technical skill attainment. The U.S. Department of Education suggested in non-regulatory guidance that states and locals use the number of…

The technical report - a necessary evil

International Nuclear Information System (INIS)

Koch, H.

1978-01-01

The article is meant mainly for students and for those starting their working life. First of all, the question is discussed why a technical report ought to be written. The technical report serves to rethink own activities, the documentation of one's own work as regards those who ordered it, and to inform the own organization and third parties of the state of technical development. This is followed by a discussion of the requirements made on a technical report, namely adaptation to the aims to be achieved, a good breakdown of subjects, a good linguistic style, and good graphical representation of results. There are numerous DIN standards which are useful when working out technical reports. The standards are quoted. (orig.) [de

Technical Training: Places available

CERN Multimedia

Monique Duval

2005-01-01

The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: LabVIEW Real-Time (F) : 7 - 9.6.2005 (3 jours) LabVIEW Migration 6 to 7: 14.6.2005 (1 day) IT3T/1 - Read your mail and more with Outlook 2003 : 14.6.2005 (IT Technical Training Tutorial, free of charge) IT3T/2 - Creating, managing and using distribution lists with Simba2 : 16.6.2005 (IT Technical Training Tutorial, free of charge) FrontPage 2003 - niveau 2 : 16 & 17.6.2005 (2 jours) Utilisation de fichiers PDF avec ACROBAT 6.0 : 20.6.2005 (1journée) Introduction to ANSYS: 21 - 24.6.2005 (4 days) IT3T/3 - Working remotely with Windows XP : 28.6.2005 (IT Technical Training Tutorial, free of charge) IT3T/4 - Editing Websites with Frontpage 2003 : 30.6.2005 (IT Technical Training Tutorial, free of charge) WORD 2003 (Short Course I) - HowTo... Work with repetitive tasks /AutoText, AutoFormat, AutoC...

46 CFR 160.066-13 - Technical tests.

Science.gov (United States)

2010-10-01

... 46 Shipping 6 2010-10-01 2010-10-01 false Technical tests. 160.066-13 Section 160.066-13 Shipping....066-13 Technical tests. (a) The following conditions apply to technical tests as described in this... signals are protected by sealed packaging, then the conditioning for the technical tests must be conducted...

A Socio-Technical Analysis of Patient Accessible Electronic Health Records.

Science.gov (United States)

Hägglund, Maria; Scandurra, Isabella

2017-01-01

In Sweden, and internationally, there is a movement towards increased transparency in healthcare including giving patients online access to their electronic health records (EHR). The purpose of this paper is to analyze the Swedish patient accessible EHR (PAEHR) service using a socio-technical framework, to increase the understanding of factors that influence the design, implementation, adoption and use of the service. Using the Sitting and Singh socio-technical framework as a basis for analyzing the Swedish PAEHR system and its context indicated that there are many stakeholders engaged in these types of services, with different driving forces and incentives that may influence the adoption and usefulness of PAEHR services. The analysis was useful in highlighting important areas that need to be further explored in evaluations of PAEHR services, and can act as a guide when planning evaluations of any PAEHR service.

Problems of technical cooperation

International Nuclear Information System (INIS)

Noramli, M.

1987-01-01

The main principles of the IAEA technical co-operation program, which intends to answer the requirements of the member states as regards technical assistance, are presented. IAEA offers its assistance in the supervision and financial support of the projects, which promise direct and quick profit to the member states. Projects related to the satisfaction of the main demands of humanity, industrial use, energy generation, radiation protection and other fields, which can promote the contribution of nuclear power generation to the course of peace, protection of health and thriving of states, are among them. 35 million dollars (USA) was allocated for the IAEA technical assistance and realization of the co-operation program in 1987

Development of a behavioural marker system for scrub practitioners' non-technical skills (SPLINTS system).

Science.gov (United States)

Mitchell, Lucy; Flin, Rhona; Yule, Steven; Mitchell, Janet; Coutts, Kathy; Youngson, George

2013-04-01

Adverse events still occur despite ongoing efforts to reduce harm to patients. Contributory factors to adverse events are often due to limitations in clinicians' non-technical skills (e.g. communication, situation awareness), rather than deficiencies in technical competence. We developed a behavioural rating system to provide a structured means for teaching and assessing scrub practitioners' (i.e. nurse, technician, operating department practitioner) non-technical skills. Psychologists facilitated focus groups (n = 4) with experienced scrub practitioners (n = 16; 4 in each group) to develop a preliminary taxonomy. Focus groups reviewed lists of non-technical-skill-related behaviours that were extracted from an interview study. The focus groups labelled skill categories and elements and also provided examples of good and poor behaviours for those skills. An expert panel (n = 2 psychologists; n = 1 expert nurse) then used an iterative process to individually and collaboratively review and refine those data to produce a prototype skills taxonomy. A preliminary taxonomy containing eight non-technical skill categories with 28 underlying elements was produced. The expert panel reduced this to three categories (situation awareness, communication and teamwork, task management), each with three underlying elements. The system was called the Scrub Practitioners' List of Intraoperative Non-Technical Skills system. A scoring system and a user handbook were also developed. A prototype behavioural rating system for scrub practitioners' non-technical skills was developed, to aid in teaching and providing formative assessment. This important aspect of performance is not currently explicitly addressed in any educational route to qualify as a scrub practitioner. © 2012 Blackwell Publishing Ltd.

The Technical Communicator as Advocate: Integrating a Social Justice Approach in Technical Communication

Science.gov (United States)

Jones, Natasha N.

2016-01-01

This article argues for the need for a social justice approach to technical communication research and pedagogy. Given previous calls by scholars in technical and professional communication (TPC) for an attention to diversity, inclusion, and equality, the author examines the place and purpose of social justice in TPC and provides useful approaches…

32 CFR 701.38 - Technical data.

Science.gov (United States)

2010-07-01

... 32 National Defense 5 2010-07-01 2010-07-01 false Technical data. 701.38 Section 701.38 National... DOCUMENTS AFFECTING THE PUBLIC FOIA Definitions and Terms § 701.38 Technical data. Recorded information, regardless of form or method of the recording, of a scientific or technical nature (including computer...

Research in Technical Colleges

Science.gov (United States)

MacLennan, A.

2008-01-01

Purpose: The purpose of this paper is to list and demonstrate areas in which research needs to be carried out, or questions answered, in order to raise the quality of technical education. Design/methodology/approach: The area of technical education expanded very rapidly in the late 1950s, and there was little comprehensive knowledge regarding the…

RUSSIAN-VIETNAMESE MILITARY-TECHNICAL COOPERATION: CHALLENGES AND OPPORTUNITIES FOR RUSSIA

Directory of Open Access Journals (Sweden)

Н В Федоров

2017-12-01

Full Text Available Vietnam plays important role in Russian policy in the Asia-Pacific region. Military-technical cooperation holds special position in Russian-Vietnamese relations. The aim of the article is the detection of the special features of military-technical cooperation between Russia and Vietnam, and also challenges and opportunities it provides for Russian policy. After the collapse of the USSR defense interaction between Russia and Vietnam was determined by commercial foundations. Vietnam needed new Russian weapons to protect its interests, first of all, in the South China Sea. For Moscow military-technical cooperation with Vietnam got economic significance. But later there was a rise of political dimension of cooperation in this sphere, influenced by some external factors. The period of the 2000-2010s was marked by growth of arms sales from Russia to Vietnam. It was mostly caused by the escalation of the South China Sea conflict, for which US-Chinese contradictions began to play an increasing role. Military-technical coopera-tion with Vietnam influenced some aspects of policy of Russia in the region. There was an increase of indi-rect involvement of Russia into the South China Sea conflict. Russian arms sales for Vietnam became one of problems in Russian-Chinese relations. But Russia and China could cope with these disputes, partly because of enlargement of their interaction in international relations, including the demonstration of similar position for some aspects of the South China Sea conflict. In the framework of development of defense cooperation with Vietnam, Russia could get special conditions of access to facilities of Cam Ranh Bay that strengthened its strategic positions in the region. Russian cooperation with Hanoi in military-technical field and general reinforcement of Russian positions in Vietnam might be also a reason for contradictions with the US.

The story of technical cooperation

International Nuclear Information System (INIS)

Park, Yang Taek

1989-09-01

This book gives descriptions of technical cooperation, which is about why does technology transfer?, process of technology transfer with model, decisive cause and cooperation of technology transfer, cost and effect of technology transfer, historical experience of technology transfer, cases of technology transfer by field such as rubber tire, medicine and computer industry and automobile industry, technology transfer process and present condition of technical cooperation, and strategy for rising of technical cooperation : selection of technology for object of cooperation and development of human resources.

World Wide Comparism of Technical and Vocational Education: Lessons for Nigerian Technical and Vocational Education Sector (I)

Science.gov (United States)

Ayeni, Abiodun Olumide

2015-01-01

This paper compared technical/vocational education in: Germany, Australia, Finland, Hong Kong, Hungary, India, Japan, South Korea, Mexico, and Nigeria, and found that technical/vocational education was given proper attention in countries considered except Nigeria, where it was handled with laissez faire attitude. Set-Up of Technical/Vocational…

Assessing neurosurgical non-technical skills: an exploratory study of a new behavioural marker system.

Science.gov (United States)

Michinov, Estelle; Jamet, Eric; Dodeler, Virginie; Haegelen, Claire; Jannin, Pierre

2014-10-01

The management of non-technical skills is a major factor affecting teamwork quality and patient safety. This article presents a behavioural marker system for assessing neurosurgical non-technical skills (BMS-NNTS). We tested the BMS during deep brain stimulation surgery. We developed the BMS in three stages. First, we drew up a provisional assessment tool based on the literature and observation tools developed for other surgical specialties. We then analysed videos made in an operating room (OR) during deep brain stimulation operations in order to ensure there were no significant omissions from the skills list. Finally, we used five videos of operations to identify the behavioural markers of non-technical skills in verbal communications. Analyses of more than six hours of observations revealed 3515 behaviours from which we determined the neurosurgeon's non-technical skills behaviour pattern. The neurosurgeon frequently engaged in explicit coordination, situation awareness and leadership behaviours. In addition, the neurosurgeon's behaviours differed according to the stage of the operation and the OR staff members with whom she was communicating. Our behavioural marker system provides a structured approach to assessing non-technical skills in the field of neurosurgery. It can also be transferred to other surgical specialties and used in surgeon training curricula. © 2014 John Wiley & Sons, Ltd.

A stochastic frontier analysis of technical efficiency of fish cage culture in Peninsular Malaysia.

Science.gov (United States)

Islam, Gazi Md Nurul; Tai, Shzee Yew; Kusairi, Mohd Noh

2016-01-01

Cage culture plays an important role in achieving higher output and generating more export earnings in Malaysia. However, the cost of fingerlings, feed and labour have increased substantially for cage culture in the coastal areas in Peninsular Malaysia. This paper uses farm level data gathered from Manjung, Perak and Kota Tinggi, Johor to investigate the technical efficiency of brackish water fish cage culture using the stochastic frontier approach. The technical efficiency was estimated and specifically the factors affecting technical inefficiencies of fish cage culture system in Malaysia was investigated. On average, 37 percent of the sampled fish cage farms are technically efficient. The results suggest very high degrees of technical inefficiency exist among the cage culturists. This implies that great potential exists to increase fish production through improved efficiency in cage culture management in Peninsular Malaysia. The results indicate that farmers obtained grouper fingerlings from other neighboring countries due to scarcity of fingerlings from wild sources. The cost of feeding for grouper (Epinephelus fuscoguttatus) requires relatively higher costs compared to seabass (Lates calcarifer) production in cage farms in the study areas. Initiatives to undertake extension programmes at the farm level are needed to help cage culturists in utilizing their resources more efficiently in order to substantially enhance their fish production.

Explaining technical inefficiency and the variation in income from apple adoption in highland Ethiopia

NARCIS (Netherlands)

Alemu, Sintayehu Hailu; Kempen, van Luuk; Ruben, Ruerd

2017-01-01

This paper considers the performance and quality of apple fruits and seedlings production in Chencha district of southern Ethiopia. The estimated, three-factor (labour, land and capital) production frontier reveals that the technical inefficiency is 60% and 48% for fruits and seedlings

25 CFR 41.10 - Technical assistance.

Science.gov (United States)

2010-04-01

... Community College's request in writing. In any case, where the type and source of technical assistance is... for technical assistance under this section shall be made in writing and sent to the applicant within... 25 Indians 1 2010-04-01 2010-04-01 false Technical assistance. 41.10 Section 41.10 Indians BUREAU...

15 CFR 911.8 - Technical requirements.

Science.gov (United States)

2010-01-01

... PROCEDURES CONCERNING USE OF THE NOAA SPACE-BASED DATA COLLECTION SYSTEMS § 911.8 Technical requirements. (a) All platform operators of the NOAA DCS must use a data collection platform radio set whose technical... 15 Commerce and Foreign Trade 3 2010-01-01 2010-01-01 false Technical requirements. 911.8 Section...

TECHNICAL EFFICIENCY AND TECHNICAL LEVEL INDICATORS APPLICATION FOR CIVIL AIRCRAFT FUNCTIONAL PROPERTIES ANALYSIS

Directory of Open Access Journals (Sweden)

Vadim V. Efimov

2018-01-01

Full Text Available Functional properties characterize the purpose of the aircraft and are described by its flight performance characteristics such as range and cruising speed, payload, runway characteristics, etc. Functional properties also characterize the aircraft efficiency that determines the objective need for their analysis by both aircraft designers and operators in conditions of permanent and systematic efficiency increase necessity. When choosing the aircraft, it is important for the operator to make sure that a selected aircraft type has a high level of functional properties, which will allow it to provide high operational efficiency without obsolescence in the long term. However, when choosing from several aircraft types the operator has to face the fact that some characteristics of considered aircraft variants are better and the others are worse that does not allow to definitely determine what aircraft type has a higher level of functional properties.The possibility of applying technical efficiency indicators and a generalized technical level indicator for analyzing the functional properties of civil aviation aircraft is explored in this article. Fuel, weight and target efficiency values as well as the previously improved technical level indicator value were calculated for the different generations and modifications of Boeing 737 and Airbus A320 families of medium-range airplanes, which was followed by the results interpretation within one airplane generation and when moving historically from one airplane generation to another. According to analysis results it is concluded that it is impossible to define the change of the aircraft functional properties level by the change in the values of separate technical efficiency indicators. Thus, it is proposed to use a generalized technical level indicator that determines the level of aircraft technical perfection for purpose and to use efficiency indicators to analyze the cost of providing this level of

Technical Assistance Needs Assessments (TANAs)

Science.gov (United States)

The Technical Assistance Needs Assessment (TANA) is a process to identify whether a community requires additional support from EPA in order to understand technical information and have meaningful participation in the Superfund decision-making process.

Technical and Physical Activities of Small-Sided Games in Young Korean Soccer Players.

Science.gov (United States)

Joo, Chang H; Hwang-Bo, Kwan; Jee, Haemi

2016-08-01

Joo, CH, Hwang-Bo, K, and Jee, H. Technical and physical activities of small-sided games in young Korean soccer players. J Strength Cond Res 30(8): 2164-2173, 2016-The aim of this study was to examine the technical aspects and physical demands during small-sided games (SSGs) with different sized pitches in young Korean soccer players. Participants were randomly selected during a nationally held youth competition. Three different game formats were used: SSG8 (8 vs. 8 played on a small-sized field [68 × 47 m]), RSG8 (8 vs. 8 played on a regular-sized field [75 × 47 m]), and RSG11 (11 vs. 11 played on a regular-sized field). Eleven technical (ball touches, passes, and shots) and 6 physical demand variables (exercise frequency by intensity) were observed and analyzed. Same variables were also analyzed for the goalkeepers. As a result, SSG8 and RSG8 showed significantly greater numbers of technical plays in 5 and 4 variables in comparison to RSG11, respectively. In addition, although the exercise intensities increased slightly in both SSG formats, the amount was within the similar range as previous reports. In conclusion, the SSGs with reduced number of players may be referred in young players to effectively train them in technical aspects of the game by allowing greater ball exposure time without excessive physical demands. Various confounding factors such as pitch dimension should be carefully considered for training specific technical and physical variables in young Korean players.

Head Start Impact Study. Technical Report

Science.gov (United States)

Puma, Michael; Bell, Stephen; Cook, Ronna; Heid, Camilla; Shapiro, Gary; Broene, Pam; Jenkins, Frank; Fletcher, Philip; Quinn, Liz; Friedman, Janet; Ciarico, Janet; Rohacek, Monica; Adams, Gina; Spier, Elizabeth

2010-01-01

This Technical Report is designed to provide technical detail to support the analysis and findings presented in the "Head Start Impact Study Final Report" (U.S. Department of Health and Human Services, January 2010). Chapter 1 provides an overview of the Head Start Impact Study and its findings. Chapter 2 provides technical information on the…

NERI FINAL TECHNICAL REPORT, DE-FC07-O5ID14647. OPTIMIZATION OF OXIDE COMPOUNDS FOR ADVANCED INERT MATRIX MATERIALS

International Nuclear Information System (INIS)

Nino, Juan C.

2009-01-01

In order to reduce the current excesses of plutonium (both weapon grade and reactor grade) and other transuranium elements, a concept of inert matrix fuel (IMF) has been proposed for an uranium free transmutation of fissile actinides which excludes continuous uranium-plutonium conversion in thermal reactors and advanced systems. Magnesium oxide (MgO) is a promising candidate for inert matrix (IM) materials due to its high melting point (2827 C), high thermal conductivity (13 W/K · m at 1000 C), good neutronic properties, and irradiation stability However, MgO reacts with water and hydrates easily, which prevents it from being used in light water reactors (LWRs) as an IM. To improve the hydration resistance of MgO-based inert matrix materials, Medvedev and coworkers have recently investigated the introduction of a secondary phase that acts as a hydration barrier. An MgO-ZrO 2 composite was specifically studied and the results showed that the composite exhibited improved hydration resistance than pure MgO. However, ZrO 2 is insoluble in most acids except HF, which is undesirable for fuel reprocessing. Moreover, the thermal conductivity of ZrO 2 is low and typically less than 3 W · m -1 · K -1 at 1000 C. In search for an alternative composite strategy, Nd 2 Zr 2 O 7 , an oxide compound with pyrochlore structure, has been proposed recently as a corrosion resistant phase, and MgO-Nd 2 Zr 2 O 7 composites have been investigated as potential IM materials. An adequate thermal conductivity of 6 W · m - 1 · K -1 at 1000 C for the MgO-Nd 2 Zr 2 O 7 composite with 90 vol% MgO was recently calculated and reported. Other simulations proposed that the MgO-pyrochlore composites could exhibit higher radiation stability than previously reported. Final optimization of the composite microstructure was performed on the 70 vol% MgO-Nd 2 Zr 2 O 7 composite that burnup calculations had shown to have the closest profile to that of MOX fuel. Theoretical calculations also indicated that a homogeneous 70 vol% MgO composite could achieve the desired microstructure that would result in satisfying the dual requirements of good thermal properties

NERI FINAL TECHNICAL REPORT, DE-FC07-O5ID14647, OPTIMIZATION OF OXIDE COMPOUNDS FOR ADVANCED INERT MATRIX MATERIALS

Energy Technology Data Exchange (ETDEWEB)

PI: JUAN C. NINO, ASSOCIATE PROFESSOR

2009-01-11

In order to reduce the current excesses of plutonium (both weapon grade and reactor grade) and other transuranium elements, a concept of inert matrix fuel (IMF) has been proposed for an uranium free transmutation of fissile actinides which excludes continuous uranium-plutonium conversion in thermal reactors and advanced systems. Magnesium oxide (MgO) is a promising candidate for inert matrix (IM) materials due to its high melting point (2827 C), high thermal conductivity (13 W/K {center_dot} m at 1000 C), good neutronic properties, and irradiation stability However, MgO reacts with water and hydrates easily, which prevents it from being used in light water reactors (LWRs) as an IM. To improve the hydration resistance of MgO-based inert matrix materials, Medvedev and coworkers have recently investigated the introduction of a secondary phase that acts as a hydration barrier. An MgO-ZrO{sub 2} composite was specifically studied and the results showed that the composite exhibited improved hydration resistance than pure MgO. However, ZrO{sub 2} is insoluble in most acids except HF, which is undesirable for fuel reprocessing. Moreover, the thermal conductivity of ZrO{sub 2} is low and typically less than 3 W {center_dot} m{sup -1} {center_dot} K{sup -1} at 1000 C. In search for an alternative composite strategy, Nd{sub 2}Zr{sub 2}O{sub 7}, an oxide compound with pyrochlore structure, has been proposed recently as a corrosion resistant phase, and MgO-Nd{sub 2}Zr{sub 2}O{sub 7} composites have been investigated as potential IM materials. An adequate thermal conductivity of 6 W {center_dot} m{sup -} 1 {center_dot} K{sup -1} at 1000 C for the MgO-Nd{sub 2}Zr{sub 2}O{sub 7} composite with 90 vol% MgO was recently calculated and reported. Other simulations proposed that the MgO-pyrochlore composites could exhibit higher radiation stability than previously reported. Final optimization of the composite microstructure was performed on the 70 vol% MgO-Nd{sub 2}Zr{sub 2}O{sub 7} composite that burnup calculations had shown to have the closest profile to that of MOX fuel. Theoretical calculations also indicated that a homogeneous 70 vol% MgO composite could achieve the desired microstructure that would result in satisfying the dual requirements of good thermal properties.

Non-technical skills assessment in surgery.

Science.gov (United States)

Sharma, Bharat; Mishra, Amit; Aggarwal, Rajesh; Grantcharov, Teodor P

2011-09-01

Adverse events in surgery have highlighted the importance of non-technical skills, such as communication, decision-making, teamwork, situational awareness and leadership, to effective organizational performance. These skills carry particular importance to surgical oncology, as members of a multidisciplinary team must work cohesively to formulate effective patient care plans. Several non-technical skills evaluation tools have been developed for use in surgery, without adequate comparison and consensus on which should be standard for training. Eleven articles describing the use of three non-technical evaluation tools related to surgery: NOTSS (Non Technical Skills for Surgeons), NOTECHS (Non Technical Skills) and OTAS (Observational Teamwork Assessment for Surgery) were analyzed with respect to scale formulation, validity, reliability and feasibility. Furthermore, their use in training thus far and the future of non-technical rating scales in surgical curricula was discussed. Future work should focus on incorporating these assessment tools into training and into a real operating room setting to provide formative evaluations for surgical residents. Copyright © 2010 Elsevier Ltd. All rights reserved.

Technical, environmental, and socioeconomic factors associated with dry-cooled nuclear energy centers

International Nuclear Information System (INIS)

1976-04-01

The report includes a review of the current state-of-the-art of dry-cooling technology for industrial and power-generating facilities and an evaluation of its technical potential and cost for large nuclear power plants. Criteria are formulated for coarse screening of the arid regions of the Western United States to select a surrogate site for more detailed site-specific analyses. The screening criteria included seismic considerations, existing transportation facilities, institutional and jurisdictional constraints, waste heat dissipation effects, water requirements, and ecologic and socioeconomic considerations. The Galt site near Las Vegas, Nevada was selected for the surrogate site analysis to assess important issues related to the construction and operation of twelve dry-cooled nuclear power plants at an arid location remote from major load centers. The assessment covers geotechnical, atmospheric and hydrologic considerations, special aspects of transporting large equipment overland to the site from seaports, analyses of potential transmission routes to major load centers, local institutional and taxing provisions, and ecologic and socioeconomic impacts

Technical, environmental, and socioeconomic factors associated with dry-cooled nuclear energy centers

Energy Technology Data Exchange (ETDEWEB)

1976-04-01

The report includes a review of the current state-of-the-art of dry-cooling technology for industrial and power-generating facilities and an evaluation of its technical potential and cost for large nuclear power plants. Criteria are formulated for coarse screening of the arid regions of the Western United States to select a surrogate site for more detailed site-specific analyses. The screening criteria included seismic considerations, existing transportation facilities, institutional and jurisdictional constraints, waste heat dissipation effects, water requirements, and ecologic and socioeconomic considerations. The Galt site near Las Vegas, Nevada was selected for the surrogate site analysis to assess important issues related to the construction and operation of twelve dry-cooled nuclear power plants at an arid location remote from major load centers. The assessment covers geotechnical, atmospheric and hydrologic considerations, special aspects of transporting large equipment overland to the site from seaports, analyses of potential transmission routes to major load centers, local institutional and taxing provisions, and ecologic and socioeconomic impacts.

Technical Skill Attainment and Post-Program Outcomes: An Analysis of Pennsylvania Secondary Career and Technical Education Graduates

Science.gov (United States)

Staklis, Sandra; Klein, Steven

2010-01-01

Since the mid-1990s, the Pennsylvania Department of Education (PDE) has required all students concentrating in career and technical education (CTE) programs to complete a standardized technical skill assessment at or near the end of their program. Results of technical skill assessments are used for a number of purposes, including recognizing…

Field convergence between technical writers and technical translators

DEFF Research Database (Denmark)

Gnecchi, M.; Maylath, B.; Mousten, Birthe

2011-01-01

As translation of technical documents continues to grow rapidly and translation becomes more automated, the roles of professional communicators and translators appear to be converging. This paper updates preliminary findings first presented at the 2008 International Professional Communication...

Critical Success Factors for On-Line Course Resources.

Science.gov (United States)

Soong, M. H. Benson; Chan, Hock Chuan; Chua, Boon Chai; Loh, Koah Fong

2001-01-01

Describes a multiple case study that was used to evaluate hypotheses on the critical success factors for online course resources in a Singapore tertiary setting. Discusses educational media; human factors pertaining to instructors; technical competency of students and instructors; mindsets about learning; collaboration; and information technology…

Technical memory 2007

International Nuclear Information System (INIS)

2009-01-01

The technical memory 2007 of the Nuclear Regulatory Authority (ARN) of the Argentine Republic, compiles the papers published in the subject on radiation protection and nuclear safety, and presented in journals, technical reports, congress or meetings of these specialities by personnel of the mentioned institution during 2007. In this edition the documents are presented on: environmental protection; transport of radioactive materials; regulations; research reactors and nuclear power plants; biological radiation effects; therapeutic uses of ionizing radiation and radioprotection of patients; internal dosimetry; physical dosimetry; knowledge management; radioactive waste management [es

Technical considerations in gastric ulcer localization using technetium-99m sucralfate

International Nuclear Information System (INIS)

Garrett, S.G.; Wcislo, W.J.

1985-01-01

After the completion and evaluation of 17 patients studies using technetium-99m-labeled sucralfate for the detection of ulcerated areas, the authors felt that the technical aspects of the studies should be evaluated. The factors for evaluation are: the time the patient is kept fasting; the time the patient is being imaged and rotated for various anatomic views; the technologist time and camera time that are involved in one study; and the cost factor of the testing procedure. Based on the findings of their small sample of patients, the sensitivity of the test is uncertain

Technical considerations in gastric ulcer localization using technetium-99m sucralfate

Energy Technology Data Exchange (ETDEWEB)

Garrett, S.G.; Wcislo, W.J.

1985-09-01

After the completion and evaluation of 17 patients studies using technetium-99m-labeled sucralfate for the detection of ulcerated areas, the authors felt that the technical aspects of the studies should be evaluated. The factors for evaluation are: the time the patient is kept fasting; the time the patient is being imaged and rotated for various anatomic views; the technologist time and camera time that are involved in one study; and the cost factor of the testing procedure. Based on the findings of their small sample of patients, the sensitivity of the test is uncertain.

Technical Training: CERN Technical Training 2004: Instructor-led WBTechT Course for Microsoft Applications

CERN Multimedia

2004-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch Would you need to enhance your skills in Microsoft Office applications or Outlook? A new "blended learning" course, combining instructor-led and computer-based multimedia training, is now offered by Technical Training: the Instructor-led CERN Web-Based Technical Training (WBTechT) Course for Microsoft Applications. The next session will take place on April 1st, morning. Course sessions will be self-paced and self-directed, with participants being in control of their learning, while ...

Farmers’ Technical Knowledge about Integrated Pest Management (IPM in Olive Production

Directory of Open Access Journals (Sweden)

Mohammad S. Allahyari

2017-12-01

Full Text Available While Integrated Pest Management (IPM is a sustainable approach of pest control, contributing to reduced use of pesticides and risks on human health and the environment, farmers have shown limited interest in practicing this method. The present study explored the levels of technical knowledge about integrated management of the olive fly (Bactrocera oleae among olive growers in Roudbar County of Iran and factors underpinning olive farmers’ technical knowledge of integrated management. Data were collected in a survey of olive farmers, on the basis of a structured questionnaire. Almost half of the farmers (48.4% had good to excellent levels of technical knowledge of integrated management, while almost a third of the farmers (35.4% had a moderate knowledge level. However, a noticeable portion of the farmers (15.9% had poor knowledge of integrated management. Moreover, most farmers showed average knowledge of the adverse effects of pesticides on human health. While most farmers showed good levels of social participation, cooperation with institutes, and participation in extension activities, they showed low levels of community involvement (involvement in a group of people that have and share common interests with each other. Olive imports and the lack of a common action for olive fly control were perceived as the main barriers of IPM adoption among most farmers. Regression analysis revealed that increased community involvement, large area under olive farming, participation in education activities, and high farming experience promoted farmers’ technical knowledge of integrated olive fly control. Strengthening growers’ technical knowledge of IPM through community involvement and extension services among inexperienced small-scale olive farmers is recommended for reducing possible unnecessary insecticide sprays in olive production.

Autism spectrum disorders in relation to parental occupation in technical fields.

Science.gov (United States)

Windham, Gayle C; Fessel, Karen; Grether, Judith K

2009-08-01

A previous study reported that fathers of children with autism spectrum disorders (ASD) were more likely to work as engineers, requiring "systemizing skills," and suggesting a distinct phenotype, but alternatively this may have been related to selection biases. We conducted a population-based study to explore whether fathers, or mothers, of children with ASD are over-represented in fields requiring highly technical skills. Subjects included 284 children with ASD and 659 gender-matched controls, born in 1994 in the San Francisco Bay Area. Parental occupation and industry were abstracted verbatim from birth certificates. Engineering, computer programming, and science were examined as highly technical occupations. To limit bias by parental socio-economic status, we selected a referent group of occupations that seemed professionally similar but of a less technical nature. Odds ratios (ORs) and 95% confidence intervals (CI) were calculated by logistic regression, adjusting for parental age, education, and child race. Mothers of cases were somewhat more likely to work in hi-tech occupations (6.7%) than mothers of controls (4.0%, P=0.07), but little difference was observed among fathers, nor for engineering separately. Compared to parents in other "white collar" occupations, the adjusted OR for highly technical occupations among mothers was 2.5 (95% CI: 1.2-5.3) and among fathers was 1.3 (95% CI: 0.79-2.1), with no evidence of a joint effect observed. Our results regarding maternal occupation in technical fields being associated with ASD in offspring suggest further study to distinguish parental occupation as a phenotypic marker of genetic loading vs. other social or exposure factors.

ATR Technical Specification Upgrade Program

International Nuclear Information System (INIS)

McCracken, R.T.; Durney, J.L.; Freund, G.A.

1990-01-01

The Advanced Test Reactor (ATR) is a 250 MW, uranium-aluminum fueled test reactor which began full power operation in 1969. The initial operation was controlled by an Operating Limits document based on the original Safety Analysis Report. Additional safety bases were later developed to support Technical Specifications which were approved and implemented in 1977. The Technical Specifications which were initially developed with content and format specified in ANSI/ANS--15.1, ''The Development of Technical Specifications for Research Reactors.'' The safety basis documentation and the Technical Specifications have been updated as required to maintain them current with the ATR facility configuration. All revisions have been made with a content, format and style consistent with the original. A major, two-phase program to upgrade the content, format and style is in progress. This paper describes the first phase of this program

Technical challenges for dismantlement verification

International Nuclear Information System (INIS)

Olinger, C.T.; Stanbro, W.D.; Johnston, R.G.; Nakhleh, C.W.; Dreicer, J.S.

1997-01-01

In preparation for future nuclear arms reduction treaties, including any potential successor treaties to START I and II, the authors have been examining possible methods for bilateral warhead dismantlement verification. Warhead dismantlement verification raises significant challenges in the political, legal, and technical arenas. This discussion will focus on the technical issues raised by warhead arms controls. Technical complications arise from several sources. These will be discussed under the headings of warhead authentication, chain-of-custody, dismantlement verification, non-nuclear component tracking, component monitoring, and irreversibility. The authors will discuss possible technical options to address these challenges as applied to a generic dismantlement and disposition process, in the process identifying limitations and vulnerabilities. They expect that these considerations will play a large role in any future arms reduction effort and, therefore, should be addressed in a timely fashion

Technical findings and regulatory analysis for Generic Safety Issue II.E.4.3, ''Containment Integrity Check''

International Nuclear Information System (INIS)

Serkiz, A.W.

1988-04-01

This report contains the technical findings and regulatory analysis for Generic Safety Issue II.E.4.3, ''Containment Integrity Check.'' An evaluation of the containment isolation history from 1965 to 1983 reveals that (except for a small number of events) containment integrity has been maintained and that the majority of reported events have been events related to exceeding Technical Specification limits (or 0.6 of the allowable leakage level). In addition, more recent risk analyses have shown that allowable leakage rates even if increased by a factor of 10 would not significantly increase risk. Potential methods of continuous monitoring are identified and evaluated. Therefore, these technical findings and risk evaluations support closure of Generic Safety Issue II.E.4.3

Microsurgical Resection of Suprasellar Craniopharyngioma-Technical Purview.

Science.gov (United States)

Nanda, Anil; Narayan, Vinayak; Mohammed, Nasser; Savardekar, Amey R; Patra, Devi Prasad

2018-04-01

Objectives  Complete surgical resection is an important prognostic factor for recurrence and is the best management for craniopharyngioma. This operative video demonstrates the technical nuances in achieving complete resection of a suprasellar craniopharyngioma. Design and Setting  The surgery was performed in a middle-aged lady who presented with the history of progressive bitemporal hemianopia and excessive sleepiness over 8 months. On imaging, suprasellar craniopharyngioma was identified. The tumor was approached through opticocarotid cistern and lamina terminalis. Exposure of bilateral optic nerves, right internal carotid artery, anterior cerebral artery, and its perforator branches was then afforded and the tumor was gross totally resected. Results  The author demonstrates step-by-step technique of microsurgical resection of suprasellar craniopharyngioma. The narrow corridor to deeper structures, intricacies of multiple perforator vessels, and the technique of arachnoid and capsule dissection are the main challenging factors for the gross total resection of craniopharyngioma. The tumor portion which lies under the ipsilateral optic nerve is a blind spot region with a high chance of leaving residual tumor. Mobilization of optic nerve may endanger visual function too. The use of handheld mirror ['mirror-technique'] helps in better visualization of this blind spot and achieve complete excision. Conclusions  The technical pearls of craniopharyngioma surgery include the optimum utilization of translamina terminalis route, wide opening of the cisterns, meticulous separation of deep perforator vessels, capsular mobilization/traction avoidance, and the use of "mirror-technique" for blind-spot visualization. These surgical strategies help to achieve complete resection without causing neurological deficit. The link to the video can be found at: https://youtu.be/9wHJ4AUpG50 .

Final Technical Report: Advanced Measurement and Analysis of PV Derate Factors.

Energy Technology Data Exchange (ETDEWEB)

King, Bruce Hardison [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Burton, Patrick D. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Hansen, Clifford [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Jones, Christian Birk [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2015-12-01

The Advanced Measurement and Analysis of PV Derate Factors project focuses on improving the accuracy and reducing the uncertainty of PV performance model predictions by addressing a common element of all PV performance models referred to as “derates”. Widespread use of “rules of thumb”, combined with significant uncertainty regarding appropriate values for these factors contribute to uncertainty in projected energy production.

Allocative and Technical Efficiency Analysis of Cassava Farming in Bitefa Village, East Miofamo District, Middle North Timor

Directory of Open Access Journals (Sweden)

Abdul Wahib Muhaimin

2018-01-01

Full Text Available Cassava is a food crop with great economic value since its cost is affordable and has been passed down to the generation.  People at Bitefa village are majority a farmer who depends their life on agriculture to meet the needs. Problems faced by farmers in farming cassava at Bitefa village are farming management that is not in accordance with the guidelines and the use of factors of production that is not suitable for the dose recommended. This suggests that the use of factors of production are not efficient. Research objectives are: (1 to analyze the factors that affect the production of cassava, (2 to analyze the level of allocative and technical efficiency, (3 to analyze factors that affect technical inefficiency. The efficient use of factors of production is expected to increase production and income for farmers of cassava. The result obtained using stochastic frontier production function analysis is that the influence of cassava farming real production is the production of land and seeds. Meanwhile, labor, cost factors and the use of manure have no effect on the real production of cassava. The technical efficiency level of cassava farming in the research area is the lowest by 0.80 of which amounted to 0.99. While the level of NPMxPx for land use allocative efficiency is 1 so that the allocation of land use in the area of research has not been efficient. NPMxPx for the use of seed allocation is 1 so that the use of seedlings is also not efficient. Nonformal education influence is real and marked positive effect against inefficiency. Formal education is marked negative but having a real effect against the inefficiency. Farmer's age is marked negative and not real, while the experience and the number of family members are marked positive but having no real effect on the production of cassava.

Incorporating technical analysis in undergraduate curricula

Directory of Open Access Journals (Sweden)

Michael R. Melton

2017-11-01

Full Text Available Purpose – The purpose of this paper is to introduce instruction of technical analysis on the undergraduate level that can coincide with traditional teachings of fundamental analysis. Design/methodology/approach – Through examples using the latest in security analysis technology, this paper illustrates the importance of technical security analysis. Findings – This research illustrates how technical analysis techniques may be used to make more significant investment decisions. Originality/value – Kirkpatrick and Dahlquist define technical analysis as a security analysis discipline for forecasting future direction of prices through the study of past market data primarily price and volume This form of analysis has stood in direct contrast to the fundamental analysis approach whereby actual facts of the company its industry and sector may be ignored. Understanding this contrast, much of academia has chosen to continue to focus its finance curricula on fundamental analysis techniques. As more universities implement trading rooms to reflect that of industry, they must recognize that any large brokerage trading group or financial institution will typically have both a technical analysis and fundamental analysis team. Thus, the need to incorporate technical analysis into undergraduate finance curricula.

Computer Self-Efficacy and Factors Influencing E-Learning Effectiveness

Science.gov (United States)

Chien, Tien-Chen

2012-01-01

Purpose: The purpose of this study is to investigate the influences of system and instructor factors on e-learning effectiveness under the interactions of computer self-efficacy. In this study, the factors of the e-learning system are functionality, interaction, and response. The factors of the e-learning instructor are attitude, technical skills,…

Influence able and Avoidable Risk Factors for Systemic Air Embolism due to Percutaneous CT-Guided Lung Biopsy: Patient Positioning and Coaxial Biopsy Technique-Case Report, Systematic Literature Review, and a Technical Note

International Nuclear Information System (INIS)

Rott, G.; Boecker, F.

2014-01-01

Following the first case of a systemic air embolism due to percutaneous CT-guided lung biopsy in our clinic we analysed the literature regarding this matter in view of influence able or avoidable risk factors. A systematic review of literature reporting cases of systemic air embolism due to CT-guided lung biopsy was performed to find out whether prone positioning might be a risk factor regarding this issue. In addition, a technical note concerning coaxial biopsy practice is presented. Prone position seems to have relevance for the development and/or clinical manifestation of air embolism due to CT-guided lung biopsy and should be considered a risk factor, at least as far as lesions in the lower parts of the lung are concerned. Biopsies of small or cavitary lesions in coaxial technique should be performed using a hemo static valve.

Technical considerations in snubber reduction programs

International Nuclear Information System (INIS)

Longo, D.L.; Kitz, G.T.

1989-01-01

Snubber reduction has been a much discussed topic for the past several years. The advantages to the owner in terms of reduced radiation exposure, lower operating costs, and better plant maintainability are obvious but difficult to quantify. The costs associated with performing a snubber reduction program can be quantified, but can vary widely depending on how the program is implemented. One approach is to divide the scope of the work into several parts, based on similarities and differences of the plant systems and technical requirements. for example, for this program, the work was divided into three parts: nuclear steam supply system, torus-attached piping, and balance of plant. This approach facilitates addressing the variations in design requirements and the variations in snubber removal priorities that are related to each plant segment. It also allows the experience gained in the first part to be applied to the subsequent parts. This paper describes one utility's experience in successfully completing two parts of a three-part snubber reduction program and focuses on the various technical issues that must be addressed along with those areas where the utility should establish checkpoints that are critical to the success of the overall program. It also describes how the experience from the first two parts will be factored into the final part of the snubber reduction program

Sensitivity of climate change mitigation estimates to assumptions about technical change

International Nuclear Information System (INIS)

Dowlatabadi, H.

1998-01-01

With greater certainty in anthropogenic influence on observed changes in climate there is increasing pressure for agreements to control emissions of greenhouse gases ([HOUGHTON]). While it is difficult to assess the appropriate level of mitigation, it has been argued that flexibility in meeting emission targets offers significant economic savings. Such flexibility can be exercised in terms of timing of mitigation (i.e. delay) or geographic location of the intervention (e.g. permit trading and Joint-Implementation). Much of this insight is based on standard models of technical change in energy supply and demand. However, standard model formulations rarely consider: (i) a link between the pattern of technical change and policy interventions; (ii) economies of learning; and (iii) technical progress in discovery and recovery of oil and gas. While there is evidence to support the importance of these factors in historic patterns of technical progress, the data necessary to calibrate internally consistent economic models of these phenomena have not been available. In this paper simple representations of endogenous and induced technical change have been used to explore the sensitivity of mitigation cost estimates to how technical change is represented in energy economics models. The scenarios involve control of CO 2 emissions to limit its concentration to no more than 550 ppm(v), starting in the year 2000, and delayed to 2025. This sensitivity analysis has revealed four robust insights: (i) If endogenous technical change is assumed, expected business as usual emissions are higher than otherwise estimated - nevertheless, while 25% greater CO 2 control is required for meeting the CO 2 concentration target, the cost of mitigation is 40% lower; (ii) If technical progress in oil and gas discovery and recovery is assumed, energy use and CO 2 emissions increase by 75% and 65%, respectively above the standard estimates; (iii) If the economies of learning exhibited in various

48 CFR 435.010 - Scientific and technical reports.

Science.gov (United States)

2010-10-01

... CATEGORIES OF CONTRACTING RESEARCH AND DEVELOPMENT CONTRACTING 435.010 Scientific and technical reports... all scientific and technical reports to the National Technical Information Service at the address... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Scientific and technical...

Technical Manual: easyCBM. Technical Report #1408

Science.gov (United States)

Anderson, Daniel; Alonzo, Julie; Tindal, Gerald; Farley, Dan; Irvin, P. Shawn; Lai, Cheng-Fei; Saven, Jessica L.; Wray, Kraig A.

2014-01-01

Since the easyCBM© learning system was first published in 2006, over $8 million of federal funding (both from the Office of Special Education Programs and more recently from the Institute of Education Sciences) has been used to develop, study, and refine the assessments available on the system. This Technical Manual summarizes the ongoing research…

A Procedural Skills OSCE: Assessing Technical and Non-Technical Skills of Internal Medicine Residents

Science.gov (United States)

Pugh, Debra; Hamstra, Stanley J.; Wood, Timothy J.; Humphrey-Murto, Susan; Touchie, Claire; Yudkowsky, Rachel; Bordage, Georges

2015-01-01

Internists are required to perform a number of procedures that require mastery of technical and non-technical skills, however, formal assessment of these skills is often lacking. The purpose of this study was to develop, implement, and gather validity evidence for a procedural skills objective structured clinical examination (PS-OSCE) for internal…

ITER technical advisory committee meeting

International Nuclear Information System (INIS)

Fujiwara, M.

1999-01-01

The ITER Technical Advisory Committee (TAC) meeting took place on December 20-22, 1999 at the Naka Joint Work Site. The objective of this meeting was to review the document 'Technical Basis for ITER-FEAT Outline Design (ODR)' issued by the Director on December 10. It was also aimed at providing the ITER Meeting scheduled for January 19-20, 2000 in Tokyo with a technical assessment of ODR and recommendations for the optimization of the anticipated plasma performance and engineering design, based on the guidelines approved by the Council in June 1998 and recommendations of the last TAC meeting

NetView technical research

Science.gov (United States)

1993-01-01

This is the Final Technical Report for the NetView Technical Research task. This report is prepared in accordance with Contract Data Requirements List (CDRL) item A002. NetView assistance was provided and details are presented under the following headings: NetView Management Systems (NMS) project tasks; WBAFB IBM 3090; WPAFB AMDAHL; WPAFB IBM 3084; Hill AFB; McClellan AFB AMDAHL; McClellan AFB IBM 3090; and Warner-Robins AFB.

75 FR 13680 - Commutation of Sentence: Technical Change

Science.gov (United States)

2010-03-23

... Sentence: Technical Change AGENCY: Bureau of Prisons, Justice. ACTION: Interim rule. SUMMARY: This document makes a minor technical change to the Bureau of Prisons (Bureau) regulations on sentence commutation to.... Commutation of Sentence: Technical Change This document makes a minor technical change to the Bureau...

Technical skills acquisition in surgery-bound senior medical students: an evaluation of student assertiveness.

Science.gov (United States)

Talbott, Vanessa A; Marks, Joshua A; Bodzin, Adam S; Comeau, Jason A; Maxwell, Pinckney J; Isenberg, Gerald A; Martin, Niels D

2012-01-01

To prepare students pursuing surgical careers, we devised a senior subinternship curriculum supplement that focused on the acquisition of technical skills required of surgical residents. We hypothesized that more assertive students, those that accomplished more of the curriculum, would perform better on a technical skills Objective Structured Clinical Examination (OSCE). Senior medical students rotating on their first general surgery subinternship were administered a 6-station OSCE on the first day of their subinternship and again during the final week of the month-long rotation. A self-directed, 38-task "scavenger hunt" representing common intern level clinical skills, procedures, and patient care activities was provided to each student. The study was performed at Jefferson Medical College, a large, private medical school in Philadelphia, PA. Forty-nine senior students completed surgical subinternships between July 2009 and September 2010, and participated both in the pre-/post-OSCEs and the scavenger hunt. Students performed significantly better on the post-rotation OSCE than on the pre-rotation OSCE; 70.2% ± 8.1% vs. 60.4% ± 12.0%, p Assertiveness scores from the "scavenger hunt" did not correlate with final OSCE scores (r = -0.328, p = 0.25), and were negatively correlated with the change between pre- and post-OSCE scores (r = -0.573, p assertiveness scores were determined by the number of tasks completed over the course of the rotation. As surgical education becomes more streamlined with evolving work hour restrictions, medical school education is playing an increasingly pivotal role in preparing students for internship. In our study, individual assertiveness in completing structured self-directed learning tasks did not directly predict the acquisition of proficiency in technical skills. We feel assertiveness is overshadowed by other factors that may carry more weight in terms of technical skills acquisition. Further studies are required to delineate these

Improvements to Technical Specifications surveillance requirements

International Nuclear Information System (INIS)

Lobel, R.; Tjader, T.R.

1992-12-01

In August 1983 an NRC task group was formed to investigate problems with surveillance testing required by Technical Specifications, and to recommend approaches to effect improvements. NUREG-1024 (''Technical Specifications-Enhancing Safety Impact'') resulted, and it contained recommendations to review the basis for test frequencies; to ensure that the tests promote safety and do not degrade equipment; and to review surveillance tests so that they do not unnecessarily burden personnel. The Technical Specifications Improvement Program (TSIP) was established in December 1984 to provide the framework for rewriting and improving the Technical Specifications. As an element of the TSIP, all Technical Specifications surveillance requirements were comprehensively examined as recommended in NUREG-1024. The results of that effort are presented in this report. The study found that while some testing at power is essential to verify equipment and system operability, safety can be improved, equipment degradation decreased, and unnecessary personnel burden relaxed by reducing the amount of testing at power

Book Review: New Perspectives on Technical Editing

Science.gov (United States)

Murphy, A. J. (Ed.); Sterken, Christiaan

2012-08-01

New Perspectives on Technical Editing by Avon J. Murphy (ed.) ISBN : 978-0895033949 (2010) Baywood Publishing Company Inc, Hardcover, 210 pages, 35.5 GBP This book presents a collection of 10 chapters dealing with diverse aspects of technical editing (ie, editorial planning, and analysis and structural changes made to other people's technological documents): research in technical editing, trends and teaching of technical editing, copyediting, and technical journal editing. The role and function of the modern journal and book editor is also dealt with in detail. Each chapter is written by an expert in the field: senior editors, university professors in technical communication, technical writers and linguists. The ever-evolving role of the editor is clearly elucidated in several historical reviews, and in the descriptions of the expectations for the future. A very striking aspect of this book is its extensive collection of bibliographic resources: every chapter lists dozens of very useful references, and the closing chapter, and annotated bibliography, contain many not so well known references, and are most useful. All in all, the book is a treasure trove listing more than 400 references, in addition to numerous webpage URLs embedded in the texts. The book is designed to help the reader to understand current practices and norms in technical editing, and to help to take action in editing as well as in teaching and educating would-be editors. The audience for this book thus includes editors and teachers, but also writers, researchers and students. A deep reading of this book will result in a better understanding of the difference between full technical editing and its much narrower component so well known as copyediting, and will convince any prospective editor that editing should not be undertaken if the people involved do not master the art of precision and accuracy in technical (as well as in human) communication, do not possess the technical know how and computer

48 CFR 2052.211-71 - Technical progress report.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Technical progress report... Technical progress report. As prescribed at 2011.104-70(b), the contracting officer shall insert the... solicitation. Technical Progress Report (JAN 1993) The contractor shall provide a monthly Technical Progress...

48 CFR 235.010 - Scientific and technical reports.

Science.gov (United States)

2010-10-01

....010 Scientific and technical reports. (b) For DoD, the Defense Technical Information Center is responsible for collecting all scientific and technical reports. For access to these reports, follow the... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Scientific and technical...

Technical Education and Economic Growth

Indian Academy of Sciences (India)

First page Back Continue Last page Graphics. Technical Education and Economic Growth. Technical Education and Economic Growth. Review of the Present Status. Expanding no.s and impairment of quality; Faculty shortage; Grim situation at Masters and PhD levels; Regional imbalance; Absence of International flavour ...

PIAAC Technical Standards and Guidelines

Science.gov (United States)

OECD Publishing, 2014

2014-01-01

The Programme for International Assessment of Adult Competencies (PIAAC) will establish technical standards and guidelines to ensure that the survey design and implementation processes of PIAAC yield high-quality and internationally comparable data. This document provides a revised version of the technical standards and guidelines originally…

Selección tecnico-economica de emisores Technical and economical selection of emitters

Directory of Open Access Journals (Sweden)

Eduardo A. Holzapfel

2007-12-01

Full Text Available El presente trabajo tuvo como objetivo estudiar los factores que intervienen en la selección técnico económico de goteros. En el estudio fueron utilizados emisores autocompensados y no autocompensados, considerando a los aspectos técnicos como porcentaje de suelo humedecido, número de emisores por planta y coeficiente de uniformidad y precio y la presión de operación del emisor como aspectos económicos. Los resultados muestran que la presión de operación de los emisores es el factor más importante a considerar en la selección, ya que para valores más bajos de presión de operación se obtuvieron menores valores de costo total anualizado, independiente del tipo de gotero. En general, los goteros no autocompesados presentaron valores de costo anualizado menores, para un rango de presión similar. Finalmente el análisis tecnico-económico en la selección de emisores es un procedimiento importante.The objective of this research was to study the parameters that affect the technical-economical selection of emitters. In the study compensated and non-compensated emitters were used. The technical aspects considered were: percentage of wetted soil, number of emitters per plant and the uniformity coefficient as well as price and operation pressure for economic aspects. The results shows that the operation pressure of emitters is the most important factor to be considered in the selection , with smaller values of pressure giving lower total annual cost, independently of the type of emitter. In general, the non-compensated emitter shows lower annual cost values than for compensated emitters, for a similar range of pressures. Finally the technical-economical analysis in the emitter selection is an important procedure.

Technical assistance and seasonality in the diet and production of dairy herds in household agriculture of Western Paraná

Directory of Open Access Journals (Sweden)

Rodrigo Cesar dos Reis Tinini

2015-02-01

Full Text Available The objective of the present study was to characterize the food sources, as well as the composition and quality of milk obtained from household farms of western Paraná State (Brazil with and without technical assistance during the different seasons. For such, 24 properties were selected, 12 of which only received assistance and technical support. Four milk samples were taken (summer, autumn, winter and spring to assess the physicochemical composition, somatic cell count and total bacterial count and feed supplied to the animals to assess the chemical composition (crude protein, ash, dry matter and neutral detergent fiber. The data were analyzed in a completely randomized design with a 2 × 4 factorial arrangement; the first factor was the presence and absence of technical assistance and the second factor was the four seasons of the year. Due to the dairy tradition of properties in the region, technical assistance had no significant effects on the health and nutritional quality of food, the number of animals, the production, or total bacterial count, which suffered oscillations only depending on the seasons of the year. However, the presence of assistance contributed to reducing somatic cell counts of milk produced and marketed. The technical assistance does not affect the quality of forages and concentrates used or the milk composition; however, it improves the sanitary quality of the milk produced throughout the four seasons of the year in household farms of western Paraná.

Genetics Home Reference: Miller syndrome

Science.gov (United States)

... Sangiorgi E, Neri G. Limb anomalies: Developmental and evolutionary aspects. Am J Med Genet. 2002 Dec 30; ... genome editing and CRISPR-Cas9? What is precision medicine? What is newborn screening? New Pages Alopecia areata ...

Technical training - Places available

CERN Document Server

2012-01-01

If you would like more information on a course, or for any other inquiry/suggestions, please contact Technical.Training@cern.ch Valeria Perez Reale, Learning Specialist, Technical Programme Coordinator (Tel.: 62424) Eva Stern and Elise Romero, Technical Training Administration (Tel.: 74924)   Electronics design Next Session Duration Language Availability Certified LabVIEW Associate Developer (CLAD) 06-Dec-12 to 06-Dec-12 1 hour English One more place available Compatibilité électromagnetique (CEM): Applications 23-Nov-12 to 23-Nov-12 3.5 hours English 3 places available Compatibilité électromagnétique (CEM): Introduction 23-Nov-12 to 23-Nov-12 3 hours English 43 places available Effets des Radiations sur les composants et systèmes électroniques 11-Dec-12 to 12-Dec-12 1 day 4 hours French 9 places available LabVIEW for beginners ...

Fuel Element Technical Manual

Energy Technology Data Exchange (ETDEWEB)

Burley, H.H. [ed.

1956-08-01

It is the purpose of the Fuel Element Technical Manual to Provide a single document describing the fabrication processes used in the manufacture of the fuel element as well as the technical bases for these processes. The manual will be instrumental in the indoctrination of personnel new to the field and will provide a single data reference for all personnel involved in the design or manufacture of the fuel element. The material contained in this manual was assembled by members of the Engineering Department and the Manufacturing Department at the Hanford Atomic Products Operation between the dates October, 1955 and June, 1956. Arrangement of the manual. The manual is divided into six parts: Part I--introduction; Part II--technical bases; Part III--process; Part IV--plant and equipment; Part V--process control and improvement; and VI--safety.

Getting Personal: Individuality, Innovation, and Technical Communication.

Science.gov (United States)

Steiner, Carol J.

1999-01-01

Suggests that effective communication between technical and nontechnical people is difficult because technical communication lacks a personal dimension: technical people give up their identity to be considered competent. Argues that a different approach to communication education for scientists, engineers, and technologists is required to equip…

Development of emergency response training focusing on non-technical skills. (2) Extraction of non-technical skills

International Nuclear Information System (INIS)

Matsui, Yuko; Hikono, Masaru; Iwasaki, Mari; Morita, Mizuho

2017-01-01

This study aimed at characterizing a non-technical skill exercise for on-site managers in charge of initial response at an emergency response center by extracting and clarifying the behavior examples of non-technical skills shown in the exercise scenario. From video observations, the non-technical skill examples were identified from seven of the eight nontechnical skill categories which had been defined when the training program was developed. Especially, they included many skills of 'Communication', 'Situation Understanding' and 'Organizational management'. At the same time, the limitation when extracting the cases by observations was identified. The extracted non-technical skill cases are expected to be used for characterizing exercise scenarios, as well as provide knowledge to raise the awareness of exercise participants. (author)

Evaluation of User Support: Factors That Affect User Satisfaction With Helpdesks and Helplines

NARCIS (Netherlands)

van Velsen, Lex Stefan; Steehouder, M.F.; de Jong, Menno D.T.

2007-01-01

In addition to technical documentation, face-to-face helpdesks and telephonic helplines are a powerful means for supporting users of technical products and services. This study investigates the factors that determine user satisfaction with helpdesks and helplines. A survey, based on the SERVQUAL

The assessment of technical risks

International Nuclear Information System (INIS)

Jaeger, T.A.

1978-01-01

The safety of technical systems is so difficult to assess because the concept 'risk' contains technical-scientific factors as well as components of individual and social psychology. Immediate or short-term hazards of human life as i.e. caused by the operation of industrial plants and mediate and thus long-term hazards have to be distinguished. Characteristic for the second hazard groups is the great time-lag before the effect takes place. Thus a causal relationship can be recognized only late and not definitely. Even when the causes have been obviated the effects still show. The development of a systems-analytical model as a basis of decisive processes for the introduction of highly endangered large-scale technologies seems particularly difficult. A starting point for the quantification of the risk can still be seen in the product of the probability of realization and the extent of the damage. Public opinion, however, does not base its evaluations on an objective concept of risk but tends to have an attitude of aversion against great and disastrous accidents. On the other hand, plenty of slight accidents are accepted much more easily, even when the amount of deadly victims from accidents reaches dimensions beyond those of the rare large-scale accidents. Here, mostly the damage possible but not the probability of its occurence is seen, let alone the general use of the new technology. The value of the mathematical models for estimating risks is mainly due to the fact that they are able to clear up decisions. (orig./HP) [de

Technical Failure of MR Elastography Examinations of the Liver: Experience from a Large Single-Center Study.

Science.gov (United States)

Wagner, Mathilde; Corcuera-Solano, Idoia; Lo, Grace; Esses, Steven; Liao, Joseph; Besa, Cecilia; Chen, Nelson; Abraham, Ginu; Fung, Maggie; Babb, James S; Ehman, Richard L; Taouli, Bachir

2017-08-01

Purpose To assess the determinants of technical failure of magnetic resonance (MR) elastography of the liver in a large single-center study. Materials and Methods This retrospective study was approved by the institutional review board. Seven hundred eighty-one MR elastography examinations performed in 691 consecutive patients (mean age, 58 years; male patients, 434 [62.8%]) in a single center between June 2013 and August 2014 were retrospectively evaluated. MR elastography was performed at 3.0 T (n = 443) or 1.5 T (n = 338) by using a gradient-recalled-echo pulse sequence. MR elastography and anatomic image analysis were performed by two observers. Additional observers measured liver T2* and fat fraction. Technical failure was defined as no pixel value with a confidence index higher than 95% and/or no apparent shear waves imaged. Logistic regression analysis was performed to assess potential predictive factors of technical failure of MR elastography. Results The technical failure rate of MR elastography at 1.5 T was 3.5% (12 of 338), while it was higher, 15.3% (68 of 443), at 3.0 T. On the basis of univariate analysis, body mass index, liver iron deposition, massive ascites, use of 3.0 T, presence of cirrhosis, and alcoholic liver disease were all significantly associated with failure of MR elastography (P analysis, only body mass index, liver iron deposition, massive ascites, and use of 3.0 T were significantly associated with failure of MR elastography (P technical failure rate of MR elastography with a gradient-recalled-echo pulse sequence was low at 1.5 T but substantially higher at 3.0 T. Massive ascites, iron deposition, and high body mass index were additional independent factors associated with failure of MR elastography of the liver with a two-dimensional gradient-recalled-echo pulse sequence. © RSNA, 2017.

78 FR 29239 - Final Priority; Technical Assistance To Improve State Data Capacity-National Technical Assistance...

Science.gov (United States)

2013-05-20

... Assistance To Improve State Data Capacity--National Technical Assistance Center To Improve State Capacity To... Education and Rehabilitative Services announces a priority under the Technical Assistance to Improve State... (FY) 2013 and later years. We take this action to focus attention on an identified national need to...

Why and How to Advance Technical Copywriting.

Science.gov (United States)

Henson, Leigh

1996-01-01

States that promotional writing for industrial/high-tech products, or technical copywriting, is gaining more attention in technical communication, although it is neglected in higher education. Testifies to the significance of technical copywriting. Suggests that dialogical audience analysis and an emphasis on rational appeal will contribute to…

7 CFR 652.4 - Technical service standards.

Science.gov (United States)

2010-01-01

... technologies and practices. (c) A technical service provider must assume responsibility in writing for the... 7 Agriculture 6 2010-01-01 2010-01-01 false Technical service standards. 652.4 Section 652.4..., DEPARTMENT OF AGRICULTURE SUPPORT ACTIVITIES TECHNICAL SERVICE PROVIDER ASSISTANCE General Provisions § 652.4...

Technical approach document

International Nuclear Information System (INIS)

1989-12-01

The Uranium Mill Tailings Radiation Control Act (UMTRCA) of 1978, Public Law 95-604 (PL95-604), grants the Secretary of Energy the authority and responsibility to perform such actions as are necessary to minimize radiation health hazards and other environmental hazards caused by inactive uranium mill sites. This Technical Approach Document (TAD) describes the general technical approaches and design criteria adopted by the US Department of Energy (DOE) in order to implement remedial action plans (RAPS) and final designs that comply with EPA standards. It does not address the technical approaches necessary for aquifer restoration at processing sites; a guidance document, currently in preparation, will describe aquifer restoration concerns and technical protocols. This document is a second revision to the original document issued in May 1986; the revision has been made in response to changes to the groundwater standards of 40 CFR 192, Subparts A--C, proposed by EPA as draft standards. New sections were added to define the design approaches and designs necessary to comply with the groundwater standards. These new sections are in addition to changes made throughout the document to reflect current procedures, especially in cover design, water resources protection, and alternate site selection; only minor revisions were made to some of the sections. Sections 3.0 is a new section defining the approach taken in the design of disposal cells; Section 4.0 has been revised to include design of vegetated covers; Section 8.0 discusses design approaches necessary for compliance with the groundwater standards; and Section 9.0 is a new section dealing with nonradiological hazardous constituents. 203 refs., 18 figs., 26 tabs

Paramedics' non-technical skills: a literature review.

Science.gov (United States)

Shields, Allan; Flin, Rhona

2013-05-01

Healthcare organisations have started to examine the impact that the human worker has on patient safety. Adopting the Crew Resource Management (CRM) approach, used in aviation, the CRM or non-technical skills of anaesthetists, surgeons, scrub practitioners and emergency physicians have recently been identified to assist in their training and assessment. Paramedics are exposed to dynamic and dangerous situations where patients have to be managed, often with life-threatening injuries or illness. As in other safety-critical domains, the technical skills of paramedics are complemented by effective non-technical skills. The aim of this paper was to review the literature on the non-technical (social and cognitive) skills used by paramedics. This review was undertaken as part of a task analysis to identify the non-technical skills used by paramedics. Of the seven papers reviewed, the results have shown very little research on this topic and so reveal a gap in the understanding of paramedic non-technical skills.

US Nuclear Regulatory Commission Human Factors Program Plan. Revision 1

International Nuclear Information System (INIS)

1984-09-01

The purpose of the NRC Human Factors Program Plan (NUREG-0985) is to ensure that proper consideration is given to human factors in the design, operation, and maintenance of nuclear facilities. This revised plan addresses nuclear power plants (NPPs) and describes (1) the technical assistance and research activities planned to provide the technical bases for the resolution of the remaining human factors related tasks described in NUREG-0660, THE NRC Action Plan developed as a result of the TMI-2 Accident, and NUREG-0737, Clarification of TMI Action Plan Requirements; (2) the additional human factors efforts identified during implementation of the Action Plan that should receive NRC attention; (3) conduct of developmental activities specified in NUREG-0985 during FY-83; and (4) the impact of Section 306 of the Nuclear Waste Policy Act of 1982, PL 97-425. The plan represents a systematic and comprehensive approach for addressing human factors concerns important to NPP safety in the FY-84 through FY-86 time frame

48 CFR 952.242-70 - Technical direction.

Science.gov (United States)

2010-10-01

... contract. (d) All technical direction shall be issued in writing by the COR. (e) The Contractor must... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Technical direction. 952... FORMS SOLICITATION PROVISIONS AND CONTRACT CLAUSES Text of Provisions and Clauses 952.242-70 Technical...

48 CFR 1552.237-71 - Technical direction.

Science.gov (United States)

2010-10-01

.... (d) Technical direction will be issued in writing or confirmed in writing within five (5) days after... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Technical direction. 1552... Technical direction. As prescribed in 1537.110, insert a clause substantially the same as the following...

48 CFR 1852.242-70 - Technical direction.

Science.gov (United States)

2010-10-01

... Direction (SEP 1993) (a) Performance of the work under this contract is subject to the written technical... the Contracting Officer in writing in accordance with NASA FAR Supplement 1842.270. “Technical... in writing by the COTR. (d) The Contractor shall proceed promptly with the performance of technical...