WorldWideScience

Sample records for factors influencing measurement

  1. Dermal factors influencing measurement of skin autofluorescence

    NARCIS (Netherlands)

    Noordzij, Margaretha J.; Lefrandt, Johan; Graaff, Reindert; Smit, Andries J.

    Background: Skin autofluorescence (SAF) is a noninvasive marker of accumulation of advanced glycation end products. It predicts cardiovascular complications and mortality in diabetes and renal failure. We assessed the influence of potential common confounders in SAF measurement, by determining the

  2. Influence Of Dilution Factor For Activity Measurement Of 60CO

    International Nuclear Information System (INIS)

    Hermawan-Candra; Nazaroh; Ermi-Juita

    2003-01-01

    Influence of dilution factor for activity measurement of 60 Co has been studied. The aim of this research is to determine influence between activity measurement result of 60 Co before and after diluted. Measurement were done by using ionization chamber detectors system and gamma spectrometry system with NaI(TI) detector. Discrepancy within three ionization chambers measurements were 0.2% - 2.1% and NaI(Tl) were 3.5% - 6%. (author)

  3. Study on the influence factors about the soil radon measurement

    International Nuclear Information System (INIS)

    Wu Zixiang; Liu Yanbin; Jia Yuxin; Mai Weiji; Liu Xiaolian; Yang Yuhua

    2006-01-01

    Objective: To explore relevant factors about the soil radon measurement and provide gist of formulating correct measure method by studying the way of the soil radon measurement. Methods: Deflation-ionization room standard is adopted. Results: The concentration of soil radon becomes higher with the sample's volume added, it also augmented with the measure depth increased in certain degree; The concentration of soil radon changes little when sample's depth is above 60 cm; The time of deflation has no obvious influence on the concentration of soil radon, but microwave show serious effect on it; The results will be lowered when the desiccant is humidified, raining has the same affection on it; Plant has some impact on it. Conclusion: The measured results will be affected by microwave, oscillate and plant. Sample's volume and depth, soil's humidity can influence it too. The result's veracity can be guaranteed by choosing appropriate sample and measure condition. (authors)

  4. Factors Influencing Museum Sustainability and Indicators for Museum Sustainability Measurement

    Directory of Open Access Journals (Sweden)

    Izabela Luiza Pop

    2016-01-01

    Full Text Available The purpose of this research was to identify the factors upon which museum sustainability depends and the way in which this can be measured. Methodologically, we applied a qualitative research approach, using semi-structured interviews with experts from the Romanian museum sector, complemented by an in-depth study of the literature in this field. Results indicated that any objective measuring of sustainability must take into account the size of a museum’s collections and its organizational structure. It was also found that museum type can affect sustainability via its competitive advantage. However, the sustainability of a museum is not strictly determined by these factors, but also by the management and marketing strategies applied. Based on analysis of literature- and respondent-based factors influencing sustainability, this article proposes a set of 33 indicators that can be used by museums to measure their sustainability, as well as a model that enables evaluation of the sustainability levels of various museums comparatively, regardless of their type, size or importance (e.g., national, regional and local. The results obtained are useful both from a theoretical point of view, given that there are few writings on this topic, and from a practical point of view, as they provide a basis for a clear, objective model of museum sustainability measurement.

  5. Factors influencing in situ gamma-ray measurements

    Science.gov (United States)

    Loonstra, E. H.; van Egmond, F. M.

    2009-04-01

    Introduction In situ passive gamma-ray sensors are very well suitable for mapping physical soil properties. In order to make a qualitative sound soil map, high quality input parameters for calibration are required. This paper will focus on the factors that affect the output of in situ passive gamma-ray sensors, the primary source, soil, not taken into account. Factors The gamma-ray spectrum contains information of naturally occurring nuclides 40K, 238U and 232Th and man-made nuclides like 137Cs, as well as the total count rate. Factors that influence the concentration of these nuclides and the count rate can be classified in 3 categories. These are sensor design, environmental conditions and operational circumstances. Sensor design The main elements of an in situ gamma-ray sensor that influence the outcome and quality of the output are the crystal and the spectrum analysis method. Material and size of the crystal determine the energy resolution. Though widely used, NaI crystals are not the most efficient capturer of gamma radiation. Alternatives are BGO and CsI. BGO has a low peak resolution, which prohibits use in cases where man-made nuclides are subject of interest. The material is expensive and prone to temperature instability. CsI is robust compared to NaI and BGO. The density of CsI is higher than NaI, yielding better efficiency, especially for smaller crystal sizes. More volume results in higher energy efficiency. The reduction of the measured spectral information into concentration of radionuclides is mostly done using the Windows analysis method. In Windows, the activities of the nuclides are found by summing the intensities of the spectrum found in a certain interval surrounding a peak. A major flaw of the Windows method is the limited amount of spectral information that is incorporated into the analysis. Another weakness is the inherent use of ‘stripping factors' to account for contributions of radiation from nuclide A into the peak of nuclide B. This

  6. Density of asphalt paving mixtures: Measurements, variations, and influencing factors

    International Nuclear Information System (INIS)

    Solaimanian, M.

    1990-01-01

    The first part describes the results of a research study to determine the effectiveness of the Troxler Model 4640 Thin Lift Nuclear Density Gauge. The densities obtained from cores and the nuclear density gauge from seven construction projects were compared. A linear regression technique was used to investigate how well the core densities could be predicted from nuclear densities. Correlation coefficients were determined to indicate the degree of correlation between the core and nuclear densities. Using a statistical analysis technique, the range of differences between core and nuclear measurements was established for specified confidence levels for each project. Analysis of the data indicated that the accuracy of this gauge is highly material dependent. While acceptable results were obtained with limestone mixtures, the gauge did not perform satisfactorily with mixtures containing siliceous aggregate. The data presented in this paper indicate that the gauge could be used as a quality control tool provided that a calibration is developed for each project. The maximum theoretical specific gravities of asphalt-aggregate paving mixtures obtained from different methods were compared. The study included experimental work and analysis of the resulting data. The agreement between results obtained from the Texas C-14 method and the Rice method were excellent. Results obtained by backcalculating theoretical maximum densities from a single Rice test were also found to be satisfactory. Theoretical approach based on bulk specific gravity of aggregate is not recommended because of yielding significantly low theoretical maximum specific gravities and high relative densities. The last two parts summarize density levels and corresponding variations obtained from fifty-seven construction projects throughout the state of Texas

  7. Factors influencing adoption of soil and water conservation measures in southern Mali

    NARCIS (Netherlands)

    Bodnar, F.; Graaff, de J.

    2003-01-01

    A soil and water conservation (SWC) extension programme, promoting erosion control measures and soil fertility measures, has been going on in southern Mali since 1986. Five factors that influence farmer adoption of SWC measures were analysed: land pressure, cotton-growing area, possession of

  8. Study of Influencing Factors of Dynamic Measurements Based on SnO2 Gas Sensor

    Directory of Open Access Journals (Sweden)

    Jinhuai Liu

    2004-08-01

    Full Text Available Abstract: The gas-sensing behaviour based on a dynamic measurement method of a single SnO2 gas sensor was investigated by comparison with the static measurement. The influencing factors of nonlinear response such as modulation temperature, duty ratio, heating waveform (rectangular, sinusoidal, saw-tooth, pulse, etc. were also studied. Experimental data showed that temperature was the most essential factor because the changes of frequency and heating waveform could result in the changes of temperature essentially.

  9. Research progress on influencing factors of hospital infection and prevention and control measures

    Directory of Open Access Journals (Sweden)

    He Wenlong

    2015-03-01

    Full Text Available Hospital infections are associated with the emergence of hospitals. As the understanding of hospital infections deepen and prevention and control measures improve, hospital infections have become manageable. In recent years, affected by the increase in invasive treatment technology, antimicrobial abuse, and other factors, the control of hospital infection has encountered new problems. This paper reviews the influencing factors of hospital infections and their prevention and control measures.

  10. Factors Influencing the Measurement of Plasma/Serum Surfactant Protein D Levels by ELISA

    OpenAIRE

    Bratcher, Preston E.; Gaggar, Amit

    2014-01-01

    BACKGROUND: Extensive variations in human surfactant protein D (SP-D) levels in circulation as measured by ELISA exist in the published literature. In order to determine the source of these variations, factors influencing the measurement by ELISA were explored. MATERIALS AND METHODS: Peripheral blood from healthy individuals was collected into various vacutainers during the same blood draw. Recombinant SP-D was diluted into different matrices and used for a standard curve. Samples were analyz...

  11. Factors influencing the use of outcome measures in physical therapy practice.

    Science.gov (United States)

    Wedge, Frances M; Braswell-Christy, Jennifer; Brown, Cynthia J; Foley, Kathleen T; Graham, Cecilia; Shaw, Sharon

    2012-02-01

    Use of outcome measures in physical therapy practice is central to evaluating the effectiveness of treatment interventions, providing accountability and addressing quality of physical therapy programs. There is limited discussion on barriers and facilitators to using outcome measures in physical therapy practice. The purpose of this study was to identify factors that influence a physical therapist when deciding to use outcome measures in clinical practice. Participants were 21 physical therapists, seven each from skilled nursing facilities, outpatient clinics, and inpatient rehabilitation facilities. A grounded theory approach was used for interview and data collection. Common themes were determined from the data and a theory developed to explain the rationale behind physical therapists' decisions to use or not use outcome measures in clinical practice. Three overlapping themes related to (1) concepts of time, (2) knowledge, and (3) facility culture were indentified as factors influencing the use of outcome measures. A fourth encompassing theme, professionalism, identified the value placed on the use of outcome measures in practice. Data revealed that therapists require more information on the outcome measures available, and this information needs to be easily accessible within the workplace. Therapists value information generated by using outcome measures in the clinical setting, but need information on what measures are available and psychometric properties. Information must be easily accessible and measures easy to use. Newer graduates and recent learners have a foundation in the use of outcome measures, but more needs to be done in the clinic and through continuing education to promote increased use and understanding.

  12. Influence of the method of measurment on the optical anisotropy factor OPTAF of pyrocarbon

    International Nuclear Information System (INIS)

    Koizlik, K.; Taeuber, K.; Nicke, H.; Wasmund, H.

    1974-07-01

    This study describes the development and installation of an automatic microscope photometer for the measurement of the optical anisotropy factor OPTAF on the pyrocarbon coatings of fuel particles. After a short representation of the physical basis of this procedure the new microscope photometer is introduced. First measurements for the adaptation of the new instrument of the so far used microscope photometer are discussed. By these measurements the influence of the instrument on the value of OPTAF in the case of some special ways of measuring are explained and the appearance of an apparent anisotropy is interpreted

  13. Influence of the method of measurement on the optical anisotropy factor OPTAF of pyrocarbon

    International Nuclear Information System (INIS)

    Koizlik, K.; Taeuber, K.; Nickel, H.; Wasmund, H.

    This study describes the development and installation of an automatic microscope photometer for the measurement of the optical anisotropy factor OPTAF on the pyrocarbon coatings of fuel particles. After a short representation of the physical basis of this procedure the new microscope photometer is introduced. First measurements for the adaptation of the new instrument of the so far used microscope photometer are discussed. By these measurements the influence of the instrument on the value of OPTAF in the case of some special ways of measuring are explained and the appearance of an apparent anisotropy is interpreted. (auth)

  14. Influence of the method of measurement on the optical anisotropy factor OPTAF of pyrocarbon

    Energy Technology Data Exchange (ETDEWEB)

    Koizlik, K; Taeuber, K; Nickel, H; Wasmund, H

    1974-07-01

    This study describes the development and installation of an automatic microscope photometer for the measurement of the optical anisotropy factor OPTAF on the pyrocarbon coatings of fuel particles. After a short representation of the physical basis of this procedure the new microscope photometer is introduced. First measurements for the adaptation of the new instrument of the so far used microscope photometer are discussed. By these measurements the influence of the instrument on the value of OPTAF in the case of some special ways of measuring are explained and the appearance of an apparent anisotropy is interpreted. (auth)

  15. FACTORS INFLUENCING THE SUCCESS OF PERFORMANCE MEASUREMENT: EVIDENCE FROM LOCAL GOVERNMENT

    Directory of Open Access Journals (Sweden)

    Herlina Primarisanti

    2015-01-01

    Full Text Available There were only a few government institutions in Indonesia capable of preparing good accountability reports. Based on the survey conducted in the Special District of Yogyakarta, the study aimed to empirically examine the influencing factors in the development of the measure-ment system of performance, performance accountability and the use of performance informa-tion. Additionally, it also tried to interpret and to explain empirical evidence in the perspective of the institutional theory. The institutional theory was used to find out the extent to which the development of the measurement system of the performance, the performance accountability and the use of the performance information was influenced because of the presence of coercive, mimetic and normative isomorphism phenomena. The study used mixed methods that combined quantitative and qualitative study approaches simultaneously and a sequential explanatory strategy. It used Partial Least Square (PLS analysis to test the hypotheses. It gave evidence that training, incentives and authority in decision making had significant impacts on the development of the measurement of the performance, the performance accountability and the use of the performance information. It contributed to the understanding of the influencing factors of the development of the measurement system of the performance, the performance accountability and the use of the performance information in order to improve the measurement system of the performance of government institutions.

  16. Measuring the factors influencing entrepreneurial e-Commerce growth in Saudi Arabia (I.S. Success factors & Demographics measurements)

    OpenAIRE

    Almehmadi, Bander

    2010-01-01

    The construction of an evaluation mechanism for entrepreneurial e-Commerce projects can be foreseen as vital to help tolerate any obstacles or source of failure that might arise in the path of the new business. Establishing a framework that encapsulates all crucial factors is a mandatory requirement in this evaluation process in order to set standers by which a firm could measure its success ability and predict and reveal all bottlenecks by carrying a full proactive inspection rather than ...

  17. Which factors influence MRI-pathology concordance of tumour size measurements in breast cancer?

    Energy Technology Data Exchange (ETDEWEB)

    Rominger, M.; Frauenfelder, T. [University Hospital Zurich, Institute of Diagnostic and Interventional Radiology, Zurich (Switzerland); Berg, D. [Urbankrankenhaus Berlin, Anesthesiology, Berlin (Germany); Ramaswamy, A. [University Hospital Marburg, Pathology, Marburg (Germany); Timmesfeld, N. [Philipps University Marburg, Institute for Medical Biometry and Epidemiology, Marburg (Germany)

    2016-05-15

    To assess MRI-pathology concordance and factors influencing tumour size measurement in breast cancer. MRI tumour size (greatest diameter in anatomical planes (MRI-In-Plane) and greatest diameter along main tumour axis (MRI-MPR)) of 115 consecutive breast lesions (59 invasive lobular carcinoma, 46 invasive ductal carcinoma, and 10 ductal carcinoma in situ) was retrospectively compared to size measured at histopathology (pT size (Path-TNM) and greatest tumour diameter as relevant for excision (Path-Diameter; reference standard)). Histopathological tumour types, preoperative palpability, surgical management, additional high-risk lesions, and BI-RADS lesion type (mass versus non-mass enhancements) were assessed as possible influencing factors. Systematic errors were most pronounced between MRI-MPR and Path-TNM (7.1 mm, limits of agreement (LoA) [-21.7; 35.9]), and were lowest between MRI-In-Plane and Path-Diameter (0.2 mm, LoA [-19.7; 20.1]). Concordance rate of MRI-In-Plane with Path-Diameter was 86 % (97/113), overestimation 9 % (10/113) and underestimation 5 % (6/113); BI-RADS mass lesions were overestimated in 7 % (6/81) versus 41 % (13/32) for non-mass enhancements. On multivariate analysis only BI-RADS lesion type significantly influenced MRI-pathology concordance (p < 0.001). 2/59 (3 %) ILC did not enhance. Concordance rate varies according to the execution of MRI and histopathological measurements. Beyond this only non-mass enhancement significantly predicted discordance. (orig.)

  18. Research Progress on Measurement Methods and Influence Factors of Thin-film Stress

    Directory of Open Access Journals (Sweden)

    MA Yibo

    2018-02-01

    Full Text Available With the size of thin-film electronic devices decreasing, the film stress became an important reason for the failure of thin film devices. Film stress not only affected the membrane structure, but also associated with film optics, electricity, mechanics and other properties, therefore film stress turned into one hot spot in the research field of thin-film materials. This paper reviewed the latest research progress of film stress, substrate curvature method, X-ray diffraction technique and Raman spectroscopy, several frequently used stress measuring techniques were compared and analyzed, and composition ratios of thin film, substrate types, magnetron sputtering process parameters (sputtering power, work pressure, substrate temperature and annealing etc. factors influencing thin film stress were summarized. It was found that substrate curvature method was suitable for measuring almost all kinds of thin film materials. X-ray diffraction and Raman spectroscopy were just fit for measuring materials with characteristic peaks. Nanoindentation method required extra stress-free samples as comparison experiments. During film fabrication and annealing process, film stress usually transited from compressive to tensile status, and several factors combined together could affect stress, so film stress could be reached the minimum value or even stress-free status through setting appropriate parameters. Finally, combined with film stress research status, accurate stress measurement methods for different materials as a thin-film stress research direction were introduced, and challenges in thin film detection range were pointed out.

  19. Measurement of exposure buildup factors: The influence of scattered photons on gamma-ray attenuation coefficients

    Science.gov (United States)

    Mann, Kulwinder Singh

    2018-01-01

    Scattered photon's influence on measured values of attenuation coefficients (μm, cm2g-1) for six low-Z (effective atomic number) building materials, at three photon energies has been estimated. Narrow-beam transmission geometry has been used for the measurements. Samples of commonly used engineering materials (Cements, Clay, Lime-Stone, Plaster of Paris) have been selected for the present study. Standard radioactive sources Cs137 and Co60 have been used for obtaining γ-ray energies 661.66, 1173.24 and 1332.50 keV. The optical thickness (OT) of 0.5 mfp (mean free path) has been found the optimum optical thickness (OOT) for μm-measurement in the selected energy range (661.66-1332.50 keV). The aim of this investigation is to provide neglected information regarding subsistence of scattered photons in narrow beam geometry measurements for low-Z materials. The measurements have been performed for a wide range of sample-thickness (2-26 cm) such that their OT varies between 0.2-3.5 mfp in selected energy range. A computer program (GRIC2-toolkit) has been used for various theoretical computations required in this investigation. It has been concluded that in selected energy-range, good accuracy in μm-measurement of low-Z materials can be achieved by keeping their sample's OT below 0.5 mfp. The exposure buildup factors have been measured with the help of mathematical-model developed in this investigation.

  20. Measuring factors that influence the utilisation of preventive care services provided by general practitioners in Australia

    Directory of Open Access Journals (Sweden)

    Oldenburg Brian

    2009-12-01

    Full Text Available Abstract Background Relatively little research attention has been given to the development of standardised and psychometrically sound scales for measuring influences relevant to the utilisation of health services. This study aims to describe the development, validation and internal reliability of some existing and new scales to measure factors that are likely to influence utilisation of preventive care services provided by general practitioners in Australia. Methods Relevant domains of influence were first identified from a literature review and formative research. Items were then generated by using and adapting previously developed scales and published findings from these. The new items and scales were pre-tested and qualitative feedback was obtained from a convenience sample of citizens from the community and a panel of experts. Principal Components Analyses (PCA and internal reliability testing (Cronbach's alpha were then conducted for all of the newly adapted or developed scales utilising data collected from a self-administered mailed survey sent to a randomly selected population-based sample of 381 individuals (response rate 65.6 per cent. Results The PCA identified five scales with acceptable levels of internal consistency were: (1 social support (ten items, alpha 0.86; (2 perceived interpersonal care (five items, alpha 0.87, (3 concerns about availability of health care and accessibility to health care (eight items, alpha 0.80, (4 value of good health (five items, alpha 0.79, and (5 attitudes towards health care (three items, alpha 0.75. Conclusion The five scales are suitable for further development and more widespread use in research aimed at understanding the determinants of preventive health services utilisation among adults in the general population.

  1. Influence of Relief on Vegetation Factors and Agrotechnical Differentiation Measures in Transylvania Plain

    Science.gov (United States)

    Ioana Moraru, Paula; Rusu, Teodor; Bogdan, Ileana; Ioan Pop, Adrian

    2016-04-01

    Transylvanian Plain (TP), with an area of 395.616 hectares, has a special importance for Romanian agriculture being characterized as a region orographically represented by hilly areas hills whereas climatically appears as a plain. Physical-geographical conditions from TP (low level of forestation; climate specific to plains) have resulted in numerous land degradation phenomena: land erosion, landslide, draining of gradient springs and groundwater level. These conditions create a favourable framework for the development of anthropic morphogenetic processes, as well as those triggered by natural mechanisms, thus intensifying the pace and their territorial expansion. Rainfall, through annual distribution and spring-summer pluvial aggressiveness, require the implementation of preservation measures on arable land, particularly for spring cultures. Along with rainfall, more factors are involved: relief, by the high degree of fragmentation and through tilting slopes; vegetation, by the dominance of cultivated plants and by the advanced state of degradation of vegetal grasslands (especially on southern slopes); lithology, by the predominance of loose rocks (sand, marl, sandstone etc.). In order to determine the influence of landscape morphology on the agro-technical characterization of land, 11 HOBO Micro Stations (H21-002) have been implemented from April to October in the locality Caianu, at various altitudes (311-441 m) at exposure coverage (N, NW, W, S, SE, E, NE). HOBO Smart Temp (S-TMB-M002) temperature sensors and Decagon EC-5 (S-SMC-M005) moisture sensors were connected to HOBO Micro Stations. Additionally, in 4 of the 11 sites, tipping bucket rain gauges (RG3-M) were deployed to measure precipitation. Each station stored electronic data regarding ground temperature at 3 depths (10, 20, 30 cm), humidity at a depth of 10 cm, air temperature (1 m) and precipitation. Data were downloaded from the Micro Stations via a laptop computer using HOBOware Pro Software Version

  2. Influence of climatic factors and pollution on the atmospheric corrosion of steels. Laboratory measurements

    International Nuclear Information System (INIS)

    Muylder, Jean van; Pourbaix, Marcel

    1977-01-01

    The influence of climatic and polluting factors on the atmospheric corrosion of four steels has been examined in the laboratory by an original accelerated electrochemical testing method. This research has led notably to the following conclusions: the corrosion behavior of the steels very much depends on the chloride- and SO 2 -contents of the rain water, as well as on the temperature of the metal during the drying periods. The best patinas have been obtained by submitting the steel successively to the corroding action of a solution of bisulphite and to the alternate actions of non-polluted rains and of drying, preferably at about 60 0 C. As a result of this, the formation of a protective patina may be accelerated by different methods. The relative merits of different steels under different conditions of atmospheric exposure may be predetermined by laboratory tests lasting several weeks. It is useful, when exposing steels in natural exposure sites, to measure as often as feasible the electrode potentials and the temperature of the steel specimens

  3. Assessing factors that influence deviations between measured and calculated reference evapotranspiration

    Science.gov (United States)

    Rodny, Marek; Nolz, Reinhard

    2017-04-01

    Evapotranspiration (ET) is a fundamental component of the hydrological cycle, but challenging to be quantified. Lysimeter facilities, for example, can be installed and operated to determine ET, but they are costly and represent only point measurements. Therefore, lysimeter data are traditionally used to develop, calibrate, and validate models that allow calculating reference evapotranspiration (ET0) based on meteorological data, which can be measured more easily. The standardized form of the well-known FAO Penman-Monteith equation (ASCE-EWRI) is recommended as a standard procedure for estimating ET0 and subsequently plant water requirements. Applied and validated under different climatic conditions, the Penman-Monteith equation is generally known to deliver proper results. On the other hand, several studies documented deviations between measured and calculated ET0 depending on environmental conditions. Potential reasons are, for example, differing or varying surface characteristics of the lysimeter and the location where the weather instruments are placed. Advection of sensible heat (transport of dry and hot air from surrounding areas) might be another reason for deviating ET-values. However, elaborating causal processes is complex and requires comprehensive data of high quality and specific analysis techniques. In order to assess influencing factors, we correlated differences between measured and calculated ET0 with pre-selected meteorological parameters and related system parameters. Basic data were hourly ET0-values from a weighing lysimeter (ET0_lys) with a surface area of 2.85 m2 (reference crop: frequently irrigated grass), weather data (air and soil temperature, relative humidity, air pressure, wind velocity, and solar radiation), and soil water content in different depths. ET0_ref was calculated in hourly time steps according to the standardized procedure after ASCE-EWRI (2005). Deviations between both datasets were calculated as ET0_lys-ET0_ref and

  4. Study on influences of experimental factors on energy and absolute activity measurements of alpha-emitters

    International Nuclear Information System (INIS)

    Terini, R.A.

    1991-01-01

    This work presents firstly a review of the fundamental results and conclusions obtained through alpha-spectrometry and alpha-counting, and the influence of energy straggling, energy loss, self-absorption and backscattering, on the determination of the energy and the absolute activity of alpha samples. Is is shown that the techniques of source fabrication and the methods of measurements play a capital influence on the obtained results. Moreover, measurements made by us, with a silicon surface barrier detector, show that the peak-asymmetry and peak-shift of an alpha-spectrum increases with the angle of emission, and that the magnitude of this effect depends on the thickness and homogeneity of the sample, as well as on the geometry of the measuring system. Through an analysis of the angular distribution of the emitted particles, the degree of isotropy of some thin Am sup(241) sources was measured and the influence of source backing and the geometry was analysed. We can conclude that, in general, there is a larger precision in measurements made under very small solid angles around the normal to the sample, and we enphasize the necessary cares required on the production of the source and on the set up of the measuring system. (author)

  5. Measuring and factors influencing mathematics teachers' technological pedagogical and content knowledge (TPACK) in three southernmost provinces, Thailand

    Science.gov (United States)

    Adulyasas, Lilla

    2017-08-01

    Technology becomes an important role in teaching and learning mathematics nowadays. Integrating technology in the classroom helps students have better understanding in many of mathematics concepts. One of the major framework for assessing the knowledge of integrating technology with the pedagogy and content in the classroom is Technological Pedagogical and Content Knowledge (TPACK) framework. This study aimed to measure mathematics teachers' TPACK in three southernmost provinces, Thailand and to study on factors influencing their TPACK. A quantitative study was carried out with 210 secondary level mathematics teachers in the three southernmost provinces, Thailand which were random by two stage sampling technique. Data were collected by using a questionnaire to identify the level of mathematics teachers' TPACK and the factors influencing their TPACK. Descriptive statistics, Pearson product moment correlation and multiple regression analysis were used for analysing data. Findings reveal that the mean score of mathematics teachers' TPACK is 3.33 which is in the medium level and the three factors which have positive correlation at .05 level of significant with the level of TPACK are teaching experience factor, individual specialization factor and personal & organization factor. However, there are only two factors influencing mathematics teachers' TPACK. The two factors are individual specialization factor and personal & organization factors. These give better understanding on mathematics teachers' knowledge in integrating technology with the pedagogy and content which will be the important information for improving mathematics teachers' TPACK.

  6. Blood flow measurement of transverse sinuses by using MR: a phantom study of its influence factors

    International Nuclear Information System (INIS)

    Gao Gejun; Feng Xiaoyuan; Li Yuan; Geng Daoying; Yao Zhengyu

    2003-01-01

    Objective: (1) To determine the relationship between the MR signal intensity and the actual flow velocity under steady flow condition. (2) to analyze the influence produced by the angle (θ) between the flow direction and the velocity-encoded gradient direction, and flip angle as well as section thickness on the velocity measurement under oblique flow condition. (3) to develop a suitable protocol for using this method to measure volumetric flow rate in the transverse sinus system. Methods: Flow phantom, which simulated blood-flow conditions in the transverse sinus system, consisted of a fluid-filled cylinder and a bent tube with a 3.4 mm internal diameter. A 1.5 T superconductive MR imager and VIGRE sequence were used for these studies. A suitable protocol was based on consideration of the effects of (1) the accuracy of velocity and transverse area measurement of flow, and (2) signal-to-noise ratio (SNR). Results: (1) Signal intensity (y) determined by MR and the actual flow velocity (x) showed straight-line correlation, y=68.914x + 357.206, R 2 =0.998. (2) As the angle (θ) increased, the transverse area of the signal determined by MR also increased, but the value of flow velocity decreased. (3) As the flip angle increased, the SNR varied from 5.7 to 11.2. The maximum SNR was obtained with 30 degree flip angle. (4) As the section thickness increased, the SNR and the transverse area of the signal determined by MR slightly increased. Conclusions: Phase-contrast MR imaging is a practical method for measuring volumetric flow rates. The angle (θ influenced the accuracy of flow velocity and the measurement of transverse area of flow whereas the flip angle and the section thickness substantially influenced the signal-to-noise ratio and the transverse area of flow

  7. Research on the Factors Influencing the Measurement Errors of the Discrete Rogowski Coil †

    Science.gov (United States)

    Xu, Mengyuan; Yan, Jing; Geng, Yingsan; Zhang, Kun; Sun, Chao

    2018-01-01

    An innovative array of magnetic coils (the discrete Rogowski coil—RC) with the advantages of flexible structure, miniaturization and mass producibility is investigated. First, the mutual inductance between the discrete RC and circular and rectangular conductors are calculated using the magnetic vector potential (MVP) method. The results are found to be consistent with those calculated using the finite element method, but the MVP method is simpler and more practical. Then, the influence of conductor section parameters, inclination, and eccentricity on the accuracy of the discrete RC is calculated to provide a reference. Studying the influence of an external current on the discrete RC’s interference error reveals optimal values for length, winding density, and position arrangement of the solenoids. It has also found that eccentricity and interference errors decreasing with increasing number of solenoids. Finally, a discrete RC prototype is devised and manufactured. The experimental results show consistent output characteristics, with the calculated sensitivity and mutual inductance of the discrete RC being very close to the experimental results. The influence of an external conductor on the measurement of the discrete RC is analyzed experimentally, and the results show that interference from an external current decreases with increasing distance between the external and measured conductors. PMID:29534006

  8. Research on the Factors Influencing the Measurement Errors of the Discrete Rogowski Coil.

    Science.gov (United States)

    Xu, Mengyuan; Yan, Jing; Geng, Yingsan; Zhang, Kun; Sun, Chao

    2018-03-13

    An innovative array of magnetic coils (the discrete Rogowski coil-RC) with the advantages of flexible structure, miniaturization and mass producibility is investigated. First, the mutual inductance between the discrete RC and circular and rectangular conductors are calculated using the magnetic vector potential (MVP) method. The results are found to be consistent with those calculated using the finite element method, but the MVP method is simpler and more practical. Then, the influence of conductor section parameters, inclination, and eccentricity on the accuracy of the discrete RC is calculated to provide a reference. Studying the influence of an external current on the discrete RC's interference error reveals optimal values for length, winding density, and position arrangement of the solenoids. It has also found that eccentricity and interference errors decreasing with increasing number of solenoids. Finally, a discrete RC prototype is devised and manufactured. The experimental results show consistent output characteristics, with the calculated sensitivity and mutual inductance of the discrete RC being very close to the experimental results. The influence of an external conductor on the measurement of the discrete RC is analyzed experimentally, and the results show that interference from an external current decreases with increasing distance between the external and measured conductors.

  9. Research on the Factors Influencing the Measurement Errors of the Discrete Rogowski Coil

    Directory of Open Access Journals (Sweden)

    Mengyuan Xu

    2018-03-01

    Full Text Available An innovative array of magnetic coils (the discrete Rogowski coil—RC with the advantages of flexible structure, miniaturization and mass producibility is investigated. First, the mutual inductance between the discrete RC and circular and rectangular conductors are calculated using the magnetic vector potential (MVP method. The results are found to be consistent with those calculated using the finite element method, but the MVP method is simpler and more practical. Then, the influence of conductor section parameters, inclination, and eccentricity on the accuracy of the discrete RC is calculated to provide a reference. Studying the influence of an external current on the discrete RC’s interference error reveals optimal values for length, winding density, and position arrangement of the solenoids. It has also found that eccentricity and interference errors decreasing with increasing number of solenoids. Finally, a discrete RC prototype is devised and manufactured. The experimental results show consistent output characteristics, with the calculated sensitivity and mutual inductance of the discrete RC being very close to the experimental results. The influence of an external conductor on the measurement of the discrete RC is analyzed experimentally, and the results show that interference from an external current decreases with increasing distance between the external and measured conductors.

  10. Evaluation of sperm motility with CASA-Mot: which factors may influence our measurements?

    Science.gov (United States)

    Yeste, Marc; Bonet, Sergi; Rodríguez-Gil, Joan E; Rivera Del Álamo, Maria M

    2018-03-14

    Computer-aided sperm analysis (CASA) is now routinely used in IVF clinics, animal breeding centres and research laboratories. Although CASA provides a more objective way to evaluate sperm parameters, a significant number of factors can affect these measurements. This paper classifies these factors into four categories: (1) sample and slide (e.g. preincubation time, type of specimen and type of chamber slide); (2) microscope (e.g. light source and microscope stage); (3) hardware and software, including the settings of each system; and (4) user-related factors. We review the effects of the different factors in each category on the measurements made and emphasise the need to take measures to standardise evaluations. The take-home message of the present article is that there are several commercial and useful CASA systems, and all are appropriate for routine analysis. Non-commercial systems may also be good choices when the user needs to adapt the device to specific experimental conditions. In both cases (commercial and non-commercial), it is important that standard protocols are put in place for evaluation, as well as methods to validate the system.

  11. Analysis of Factors Influencing Measurement Accuracy of Al Alloy Tensile Test Results

    Science.gov (United States)

    Podgornik, Bojan; Žužek, Borut; Sedlaček, Marko; Kevorkijan, Varužan; Hostej, Boris

    2016-02-01

    In order to properly use materials in design, a complete understanding of and information on their mechanical properties, such as yield and ultimate tensile strength must be obtained. Furthermore, as the design of automotive parts is constantly pushed toward higher limits, excessive measuring uncertainty can lead to unexpected premature failure of the component, thus requiring reliable determination of material properties with low uncertainty. The aim of the present work was to evaluate the effect of different metrology factors, including the number of tested samples, specimens machining and surface quality, specimens input diameter, type of testing and human error on the tensile test results and measurement uncertainty when performed on 2xxx series Al alloy. Results show that the most significant contribution to measurement uncertainty comes from the number of samples tested, which can even exceed 1 %. Furthermore, moving from experimental laboratory conditions to very intense industrial environment further amplifies measurement uncertainty, where even if using automated systems human error cannot be neglected.

  12. Factors influencing reliability of liver stiffness measurements using transient elastography (M-probe)—Monocentric experience

    Energy Technology Data Exchange (ETDEWEB)

    Şirli, Roxana, E-mail: roxanasirli@gmail.com; Sporea, Ioan, E-mail: isporea@umft.ro; Bota, Simona, E-mail: bota_simona1982@yahoo.com; Jurchiş, Ana, E-mail: ana.jurchis@yahoo.com

    2013-08-15

    Aim: To retrospectively assess the feasibility of transient elastography (TE) and the factors associated with failed and unreliable liver stiffness measurements (LSMs), in patients with chronic liver diseases. Material and methods: Our retrospective study included 8218 consecutive adult patients with suspected chronic liver diseases. In each patient, LSMs were performed with a FibroScan{sup ®} device (Echosens, France), with the M probe. Failure of TE measurements was defined if no valid measurement was obtained after at least 10 shots and unreliable if fewer than 10 valid shots were obtained, success rate (SR) <60% and/or interquartile range interval/median value (IQR/Med) ≥30%. Results: From the 8218 patients, failed and unreliable LSMs were observed in 29.2% of cases. In univariant analysis, the following risk factors were associated with failed and unreliable measurements: age over 50 years (OR 2.04; 95%CI 1.84–2.26), female gender (OR 1.32; 95%CI 1.20–1.45), BMI > 27.7 kg/m{sup 2} (OR 2.89, 95%CI 2.62–3.19), weight > 77 kg (OR 2.17; 95%CI 1.97–2.40) and height < 162 cm (OR 1.26; 95%CI 1.14–1.40). In multivariate analysis all the factors mentioned above were independently associated with the risk of failed and unreliable measurements. If all the negative predictive factors were present (woman, older than 50 years, with BMI > 27.7 kg/m{sup 2}, heavier than 77 kg and shorter than 162 cm), the rate of failed and unreliable measurements was 58.5%. In obese patients (BMI ≥ 30 kg/m{sup 2}), the rate of failed and unreliable measurements was 49.5%. Conclusion: Failed and unreliable LSMs were observed in 29.1% of patients. Female gender, older age, higher BMI, higher weight and smaller height were significantly associated with failed and unreliable LSMs.

  13. Factors influencing the reliability of non-electric detonating circuit in underground uranium mines and preventive measures of misfiring

    International Nuclear Information System (INIS)

    Li Qin

    2010-01-01

    Characteristics of non-electric detonating circuit are introduced. The main factors influencing the reliability of non-electric detonating circuit are described. Taking an underground blasting of a uranium mine for example, the reliability of various kinds of detonating network system is calculated using the reliability theory and numerical analysis method. The reasons that cause the misfiring in non-electric detonating circuit system are analyzed, and preventive measures are put forward.(authors)

  14. What Factors Influence States' Capacity to Report Children's Health Care Quality Measures? A Multiple-Case Study.

    Science.gov (United States)

    Christensen, Anna L; Petersen, Dana M; Burton, Rachel A; Forsberg, Vanessa C; Devers, Kelly J

    2017-01-01

    Objectives The objective of this study was to describe factors that influence the ability of state Medicaid agencies to report the Centers for Medicare & Medicaid Services' (CMS) core set of children's health care quality measures (Child Core Set). Methods We conducted a multiple-case study of four high-performing states participating in the Children's Health Insurance Program Reauthorization Act (CHIPRA) Quality Demonstration Grant Program: Illinois, Maine, Pennsylvania, and Oregon. Cases were purposively selected for their diverse measurement approaches and used data from 2010 to 2015, including 154 interviews, semiannual grant progress reports, and annual public reports on Child Core Set measures. We followed Yin's multiple-case study methodology to describe how and why each state increased the number of measures reported to CMS. Results All four states increased the number of Child Core Set measures reported to CMS during the grant period. Each took a different approach to reporting, depending on the available technical, organizational, and behavioral inputs in the state. Reporting capacity was influenced by a state's Medicaid data availability, ability to link to other state data systems, past experience with quality measurement, staff time and technical expertise, and demand for the measures. These factors were enhanced by CHIPRA Quality Demonstration grant funding and other federal capacity building activities, as hypothesized in our conceptual framework. These and other states have made progress reporting the Child Core Set since 2010. Conclusion With financial support and investment in state data systems and organizational factors, states can overcome challenges to reporting most of the Child Core Set measures.

  15. Developing a tool to measure the factors influencing nurses' enjoyment of nursing.

    Science.gov (United States)

    Wilkes, Lesley; Doull, Michelle; Ng Chok, Harrison; Mashingaidze, Gladys

    2017-07-01

    To develop a tool to measure the influencing nurses' enjoyment of nursing. Enjoyment in the workplace is an influential aspect found to boost work morale, job satisfaction leading to higher work retention which is important in nursing given the availability of nurses in the workforce. This study looks to refine the determinants of enjoyment from nurses in a large metropolitan hospital in western Sydney. Quantitative. A 23-item survey questionnaire was used to ask nurses to rate the determinants that affect their enjoyment of nursing on a five-point Likert scale. The survey was distributed in a hard copy and online through a hospital-wide broadcast. Demographic items were also collected. A total of 124 responses were received, of which 54 were from online and 70 from hard copy surveys. The data analysis found 16 determinants of enjoyment. Of these, four were perceived by over 80% of the nurses to negatively impact their enjoyment. In contrast, nine items showed a positive effect on enjoyment with educating others, connecting with others, variety of work, doing and sharing with others, supporting others being the most positive (≥89% of responses). Three items were considered neutral: criticism, busy workload and changing policies. This study has added to the growing evidence on nurse enjoyment and its effects on job satisfaction. Nurses enjoy caring for patients and also find enjoyment and satisfaction in teaching others to care as well as socially connecting. Enjoyment seems to be one of the main reasons nurses continue to stay in nursing even though the system and people are not always supportive, encouraging or conducive to career development. © 2016 John Wiley & Sons Ltd.

  16. [Natural factors influencing sleep].

    Science.gov (United States)

    Jurkowski, Marek K; Bobek-Billewicz, Barbara

    2007-01-01

    Sleep is a universal phenomenon of human and animal lives, although the importance of sleep for homeo-stasis is still unknown. Sleep disturbances influence many behavioral and physiologic processes, leading to health complications including death. On the other hand, sleep improvement can beneficially influence the course of healing of many disorders and can be a prognostic of health recovery. The factors influencing sleep have different biological and chemical origins. They are classical hormones, hypothalamic releasing and inhibitory hormones, neuropeptides, peptides and others as cytokines, prostaglandins, oleamid, adenosine, nitric oxide. These factors regulate most physiologic processes and are likely elements integrating sleep with physiology and physiology with sleep in health and disorders.

  17. Factors influencing spinal sagittal balance, bone mineral density, and Oswestry Disability Index outcome measures in patients with rheumatoid arthritis.

    Science.gov (United States)

    Masamoto, Kazutaka; Otsuki, Bungo; Fujibayashi, Shunsuke; Shima, Koichiro; Ito, Hiromu; Furu, Moritoshi; Hashimoto, Motomu; Tanaka, Masao; Lyman, Stephen; Yoshitomi, Hiroyuki; Tanida, Shimei; Mimori, Tsuneyo; Matsuda, Shuichi

    2018-02-01

    To identify the factors influencing spinal sagittal alignment, bone mineral density (BMD), and Oswestry Disability Index (ODI) outcome measures in patients with rheumatoid arthritis (RA). We enrolled 272 RA patients to identify the factors influencing sagittal vertical axis (SVA). Out of this, 220 had evaluation of bone mineral density (BMD) and vertebral deformity (VD) on the sagittal plane; 183 completed the ODI questionnaire. We collected data regarding RA-associated clinical parameters and standing lateral X-ray images via an ODI questionnaire from April to December 2012 at a single center. Patients with a history of spinal surgery or any missing clinical data were excluded. Clinical parameters included age, sex, body mass index, RA disease duration, disease activity score 28 erythrocyte sedimentation rate (DAS28-ESR), serum anti-cyclic citrullinated peptide antibody, serum rheumatoid factor, serum matrix metalloproteinase-3, BMD and treatment type at survey, such as methotrexate (MTX), biological disease-modifying anti-rheumatic drugs, and glucocorticoids. We measured radiological parameters including pelvic incidence (PI), lumbar lordosis (LL), and SVA. We statistically identified the factors influencing SVA, BMD, VD, and ODI using multivariate regression analysis. Multivariate regression analysis showed that larger SVA correlated with older age, higher DAS28-ESR, MTX nonuse, and glucocorticoid use. Lower BMD was associated with female, older age, higher DAS28-ESR, and MTX nonuse. VD was associated with older age, longer disease duration, lower BMD, and glucocorticoid use. Worse ODI correlated with older age, larger PI-LL mismatch or larger SVA, higher DAS28-ESR, and glucocorticoid use. In managing low back pain and spinal sagittal alignment in RA patients, RA-related clinical factors and the treatment type should be taken into consideration.

  18. Factors influencing the choice of performance measures for the oil and gas supply chain – exploratory study

    Science.gov (United States)

    Menhat, Masha; Yusuf, Y.

    2018-04-01

    The current value of the oil price per barrel has severely impacted the oil and gas industry around the world. This has worsened the situation due to the fact that it has long been the backbone of the country through the energy supply, employability and also its role as the major economic contributor. Due to multiple external factors that affect this industry such as crude oil availability, oil price fluctuation, high transportation cost, as well as exposure to high uncertainties, it is sensible for the supply chain practitioner to shift their focus in managing their resources and capabilities. To maximise the potential of supply chain activities in improving overall company performance, it is important to pay extra attention on their performance management. This includes the design of meaningful performance measurement framework to assess organisational performance. This study will explore the influencing factors in choosing performance measures for the oil and gas supply chain. Five in-depth interviews were conducted with supply chain experts within the industry. Eight influencing factors have been identified through the interviews.

  19. The influence of anthropometric factors on postural balance: the relationship between body composition and posturographic measurements in young adults

    Directory of Open Access Journals (Sweden)

    Angélica Castilho Alonso

    2012-12-01

    Full Text Available OBJECTIVE: The aim of the present study was to evaluate the influence of anthropometric characteristics and gender on postural balance in adults. One hundred individuals were examined (50 males, 50 females; age range 20-40 years. METHODS: The following body composition measurements were collected (using bone densitometry measurements: fat percentage (% fat, tissue (g, fat (g, lean mass (g, bone mineral content (g, and bone mineral density (g/cm2. In addition, the following anthropometric measurements were collected: body mass (kg, height (cm, length of the trunk-cephalic region (cm, length of the lower limbs (cm and length of the upper limbs (cm. The following indices were calculated: body mass index (kg/m², waist-hip ratio and the support base (cm². Also, a postural balance test was performed using posturography variables with open and closed eyes. RESULTS: The analysis revealed poor correlations between postural balance and the anthropometric variables. A multiple linear regression analysis demonstrated that the whole group (female and male height explained 12% of the medial-lateral displacement, 10% of the speed of oscillation, and 11% of the displacement area. The length of the trunk-cephalic length explained 6% of the displacement in the anteroposterior direction. With eyes closed, the support base and height explained 18% of the medial displacement, and the lateral height explained 10% of the displacement speed and 5% of the scroll area. CONCLUSION: Measured using posturography, the postural balance was only slightly influenced by the anthropometric variables, both with open and closed eyes. Height was the anthropometric variable that most influenced postural balance, both in the whole group and separately for each gender. Postural balance was more influenced by anthropometric factors in males than females.

  20. Catching Fish and Avoiding Sharks: Investigating Factors That Influence Developmentally Appropriate Measurement of Preschoolers' Inhibitory Control

    Science.gov (United States)

    Howard, Steven J.; Okely, Anthony D.

    2015-01-01

    Although researchers agree that the first 5 years of life are critical for children's developing executive functions (EFs), further advances are hindered by a lack of consensus on the design and selection of developmentally appropriate EF tasks for young children. Given this debate, well-established adult measures of EF routinely have been adapted…

  1. Factors which influence Nova Scotia farmers in implementing energy efficiency and renewable energy measures

    International Nuclear Information System (INIS)

    Bailey, J.A.; Gordon, R.; Burton, D.; Yiridoe, E.K.

    2008-01-01

    Improvements in energy efficiency and renewable energy use can reduce farm operating costs and reduce greenhouse gas (GHG) emissions. Responses (n=224, representing a 32% response rate) from a mail survey were used to assess use and interest in energy efficient and renewable energy options on farms in Nova Scotia, Canada. Energy efficiency options used the most were behavior, insulation, and lighting. Few farms used renewable energy options. Approximately 78% of farmers indicated an interest in implementing energy efficiency and renewable energy options. Interest varied by farm type and size. Interest increased with farm size. The two main efficiency options of interest were lighting (60.8%) and insulation (43.7%), while wind power development (55.5%) and solar water heating (24.5%) were the main renewable options of interest. Farmers concerned about power and equipment reliability were less likely to be interested in implementing options. Farmers concerned about the environment were more likely to be interested in implementing options. Current use of certain energy efficiency technologies, such as efficient lighting, influenced implementation interest

  2. Factors influencing heterogeneity of radiation-induced DNA-damage measured by the alkaline comet assay

    Directory of Open Access Journals (Sweden)

    Seidel Clemens

    2012-04-01

    Full Text Available Abstract Background To investigate whether different conditions of DNA structure and radiation treatment could modify heterogeneity of response. Additionally to study variance as a potential parameter of heterogeneity for radiosensitivity testing. Methods Two-hundred leukocytes per sample of healthy donors were split into four groups. I: Intact chromatin structure; II: Nucleoids of histone-depleted DNA; III: Nucleoids of histone-depleted DNA with 90 mM DMSO as antioxidant. Response to single (I-III and twice (IV irradiation with 4 Gy and repair kinetics were evaluated using %Tail-DNA. Heterogeneity of DNA damage was determined by calculation of variance of DNA-damage (V and mean variance (Mvar, mutual comparisons were done by one-way analysis of variance (ANOVA. Results Heterogeneity of initial DNA-damage (I, 0 min repair increased without histones (II. Absence of histones was balanced by addition of antioxidants (III. Repair reduced heterogeneity of all samples (with and without irradiation. However double irradiation plus repair led to a higher level of heterogeneity distinguishable from single irradiation and repair in intact cells. Increase of mean DNA damage was associated with a similarly elevated variance of DNA damage (r = +0.88. Conclusions Heterogeneity of DNA-damage can be modified by histone level, antioxidant concentration, repair and radiation dose and was positively correlated with DNA damage. Experimental conditions might be optimized by reducing scatter of comet assay data by repair and antioxidants, potentially allowing better discrimination of small differences. Amount of heterogeneity measured by variance might be an additional useful parameter to characterize radiosensitivity.

  3. Factors influencing heterogeneity of radiation-induced DNA-damage measured by the alkaline comet assay

    International Nuclear Information System (INIS)

    Seidel, Clemens; Lautenschläger, Christine; Dunst, Jürgen; Müller, Arndt-Christian

    2012-01-01

    To investigate whether different conditions of DNA structure and radiation treatment could modify heterogeneity of response. Additionally to study variance as a potential parameter of heterogeneity for radiosensitivity testing. Two-hundred leukocytes per sample of healthy donors were split into four groups. I: Intact chromatin structure; II: Nucleoids of histone-depleted DNA; III: Nucleoids of histone-depleted DNA with 90 mM DMSO as antioxidant. Response to single (I-III) and twice (IV) irradiation with 4 Gy and repair kinetics were evaluated using %Tail-DNA. Heterogeneity of DNA damage was determined by calculation of variance of DNA-damage (V) and mean variance (Mvar), mutual comparisons were done by one-way analysis of variance (ANOVA). Heterogeneity of initial DNA-damage (I, 0 min repair) increased without histones (II). Absence of histones was balanced by addition of antioxidants (III). Repair reduced heterogeneity of all samples (with and without irradiation). However double irradiation plus repair led to a higher level of heterogeneity distinguishable from single irradiation and repair in intact cells. Increase of mean DNA damage was associated with a similarly elevated variance of DNA damage (r = +0.88). Heterogeneity of DNA-damage can be modified by histone level, antioxidant concentration, repair and radiation dose and was positively correlated with DNA damage. Experimental conditions might be optimized by reducing scatter of comet assay data by repair and antioxidants, potentially allowing better discrimination of small differences. Amount of heterogeneity measured by variance might be an additional useful parameter to characterize radiosensitivity

  4. Influence of pregnancy on bone density: a risk factor for osteoporosis? Measurements of the calcaneus by ultrasonometry.

    Science.gov (United States)

    Kraemer, Bernhard; Schneider, Silke; Rothmund, Ralf; Fehm, Tanja; Wallwiener, Diethelm; Solomayer, Erich-Franz

    2012-04-01

    There are conflicting opinions in the literature about whether pregnancy influences maternal bone density or osteoporosis development. The study aim was to investigate whether there is a significant alteration in maternal bone density during normal pregnancy. Bone mass of 200 pregnant women aged 22-42 years was measured twice with quantitative ultrasonometry (QUS) of the heel (Os calcaneum). The first measurement was performed between the 10th and 22nd week of pregnancy, follow-up of 149 women took place 0-9 days postpartum. A questionnaire focusing on data affecting bone metabolism and bone turnover was handed out at the first visit. Median reduction in speed of sound (SOS) was 11 m/s at follow-up indicating a decline of the stiffness during pregnancy. No significant correlation was found between lactation period and the obtained values for stiffness, SOS, T score and Z score. For broadband ultrasonographic attenuation, there was a statistically significant difference (p osteoporosis (n = 30) compared to patients without did not reveal statistical significance during pregnancy. Glucocorticoid therapy, nicotine consumption, physical exercise and nutrition was not statistically significant (p > 0.05). SOS value of women with a twin pregnancy was different over the study period (p pregnancy. Routine evaluation of the bone density in all pregnant women does not seem to be justified; however, it is reasonable in women who present with risk factors. These women could be screened with QUS.

  5. Measuring the Level of Industrial Green Development and Exploring Its Influencing Factors: Empirical Evidence from China’s 30 Provinces

    Directory of Open Access Journals (Sweden)

    Chaofan Chen

    2016-02-01

    Full Text Available Nowadays, with the green economy becoming mainstream in the world, an industrial revolution as the core of green development has emerged. Based on the empirical evidence from China’s 30 provinces, this study establishes an evaluation index system of China’s industrial green development and applies the analytic hierarchy process to determine the indices’ weights and properties to measure the level of industrial green development in China’s 30 provinces. Then, an empirical study is conducted to explore the relevant factors influencing China’s industrial green development by using the dynamic panel data model and a panel threshold test. The results show that China’s level of industrial green development has the characteristic of typical regional differentiation with a ladder-like distribution from the east and middle to the west, and the eastern region has the highest level on industrial green output, industrial green efficiency and industrial green innovation. Technological progress and innovation can stimulate industrial green development. The impact of environmental regulation and foreign investment on industrial green development presents a nonlinear “N”-type trend, and the positive effects are mainly observed in eastern China. Capital deepening, heavy chemical industries and an unreasonable energy structure are not effective in industrial green development. There is no direct relation between the enterprise scale and industrial green development.

  6. Exploring factors that influence students' attitudes toward midwifery in Jordan: Measuring psychometric properties of a newly developed tool.

    Science.gov (United States)

    Al Hadid, Lourance A; Al-Rajabi, Omaymah; AlBarmawi, Marwa; Yousef Sayyah, Najah Sayyah; Toqan, Lwiza Moh'd

    2018-03-01

    Students' professional choice to proceed in midwifery is influenced by many factors. This study validated an instrument developed to assess students' attitudes toward midwifery in Jordan. It also addressed the motivating and de-motivating factors influencing students' decision concerning joining and continuing in midwifery. A descriptive, cross-section study was conducted on a convenience sample of 374 midwifery students representing private, governmental, and military midwifery colleges. The researchers developed the study questionnaire through conducting a comprehensive literature review, organizing common themes and consulting experts. Exploratory factor analysis and tests of normality and reliability, including Cronbach's Alpha and Bartlett's test, were used in the analysis. The result was three factors were explained by 23 items. They were as follows: professional knowledge, professional motivation factors, and de-motivating professional factors. The first 8 items explained nearly 61% of the variance. Cronbach's Alpha was 0.834 with a range of 0.835-0.839. The Spearman-Brown coefficient was 0.81 and Guttman Split-Half coefficient was 0.83. Issues of reliability and validity require a repetitive process of testing under a range of circumstances to ensure both stability and representation of the construct. However, addressing factors found to have impact of students' decisions is crucial to improve retention of high quality students. Copyright © 2018. Published by Elsevier Ltd.

  7. Human factors influencing decision making

    OpenAIRE

    Jacobs, Patricia A.

    1998-01-01

    This report supplies references and comments on literature that identifies human factors influencing decision making, particularly military decision making. The literature has been classified as follows (the classes are not mutually exclusive): features of human information processing; decision making models which are not mathematical models but rather are descriptive; non- personality factors influencing decision making; national characteristics influencing decision makin...

  8. Food loss rates at the food retail, influencing factors and reasons as a basis for waste prevention measures.

    Science.gov (United States)

    Lebersorger, S; Schneider, F

    2014-11-01

    This paper quantifies food loss rates for fruit & vegetables, dairy products and bread & pastry as well as donations to social services. In addition potential influencing factors and reasons for food losses are investigated in order to provide a basis for the development of waste prevention measures. Detailed data from 612 retail outlets all over Austria, which covered the period of one year, were analysed and sorting analyses of discarded food were carried out in a small sample of retail outlets. Food loss amounts to 1.3% of the sales of dairy products, 2.8% for bread & pastry and 4.2% for fruit & vegetables. Returned bread amounts to additional 9.7% of the sales of bread & pastry. The food loss rates are similar to the results of previous publications. At present, 7% of the food loss is donated to social services, 38% of retail outlets do not donate any articles at all. Food loss rates are declining with increasing sales areas, increasing numbers of purchases per year and increasing sales of the retail outlet, but explain only 33% or less of the variation of food loss rates. Large differences between retail outlets of comparable structure indicate potential for reduction. More than a quarter of discarded food articles did not show any flaws besides the expiration of the best before or sell-by date. Waste prevention approaches should focus on avoiding returns, transfer of best practices, information and education of employees and customers as well as strengthening the donation to social services. Copyright © 2014 Elsevier Ltd. All rights reserved.

  9. How demographic and economic factors have influenced ways of residing measured by urbanisation, type of dwelling, and type of tenure

    DEFF Research Database (Denmark)

    Vestergaard, Hedvig

    2005–2007. Urban sprawl and overinvestment in business premises and housing were important risks to be considered. The high economic activity also led to an increase in the cost of housing and hence to affordability problems in major cities. Many new urban quarters and towns came into planning...... in this period. The aim is especially to give an overview of how the economic and financial crisis affected the ways of residing in ten countries in: a) the Nordic countries, b) Western Europe, and in c) Eastern Europe. This is done by analysing how demographic and economic factors have influenced ways...

  10. Factors influencing plant invasiveness

    Science.gov (United States)

    Yvette Ortega; Dean Pearson

    2009-01-01

    Invasiveness of spotted knapweed and biological control agents. Dean and Yvette are examining the influence of drought on the invasiveness of spotted knapweed (Centaurea maculosa) and its susceptibility to herbivory by biological control agents. In collaboration with the University of Montana and Forest Health Protection, researchers have constructed 150...

  11. The relative influence of the anthropogenic air pollutants on the atmospheric turbidity factors measured at an urban monitoring station

    International Nuclear Information System (INIS)

    Elminir, Hamdy K.; Hamid, R.H.; El-Hussainy, F.; Ghitas, Ahmed E.; Beheary, M.M.; Abdel-Moneim, Khaled M.

    2006-01-01

    This work is based on simultaneous measurements of direct solar radiation along with other chemical measurements, with the objective of investigating the diurnal and seasonal variations of atmospheric turbidity factors (i.e., Linke's factor, Angstroem's coefficient, and aerosol optical depth). Relationships between atmospheric turbidity factors, expressing the solar radiation extinction, and anthropogenic air pollutants were also evaluated. The frequency of occurrence of the individual indices has been established to describe the sky conditions. The preliminary results obtained indicate high variability of aerosol loading, leading to high turbidity for most of the year. Annual averages of 0.2 and 6 with standard deviations of 0.096 and 0.98 were found for Angstroem and Linke turbidities, respectively. On the base of the frequency of occurrence, it has been found that over 50% of the dataset are around 0.25 and 6.3 for Angstroem and Linke turbidities, respectively. On average, the month of September experienced the highest turbidity, while December experienced the lowest. A possible reason for this is that the vertical distribution of the aerosol particles moves up in September due to the extent of the Sudan monsoon trough. We also note that spring values of the turbidity factors are closer to summer values, whereas the pronounced difference between the summer values in comparison with the winter values may be attributed to relatively greater difference in the water vapor level in the atmosphere

  12. Factors Influencing of Social Conflict

    Directory of Open Access Journals (Sweden)

    Suwandi Sumartias

    2013-07-01

    Full Text Available Social conflicts that occur in several areas in Indonesia lately, one of them is caused by the weakness of law certainty. This is feared to threaten the integration of the Republic of Indonesia. This study aims to determine the factors that affect social conflict in Manis Lor village in Kuningan district. The method used the explanatory quantitative methods, the statistical test Path Analysis. The study population was a formal and informal community leaders (village chief, clergy, and youth, and the people who involved in a conflict in Manis Lor village Kuningan regency. The result shows a There is no significant influence between social identity factors with social conflict anarchist. b There is significant influence between socio-economic factors with social conflict anarchists. c There is no significant influence between the credibility factor anarchist leaders with social conflict. d There is no significant influence between the motive factor with anarchist social conflict. e There is significant influence between personality factors/beliefs with anarchist social conflict. f There is significant influence of behavioral factors anarchist communication with social conflict.

  13. Development of an instrument based on the protection motivation theory to measure factors influencing women's intention to first pap test practice.

    Science.gov (United States)

    Hassani, Lale; Dehdari, Tahereh; Hajizadeh, Ebrahim; Shojaeizadeh, Davoud; Abedini, Mehrandokht; Nedjat, Saharnaz

    2014-01-01

    Given that there are many Iranian women who have never had a Pap smear, this study was designed to develop and validate a measurement tool based on the Protection Motivation Theory to assess factors influencing the Iranian women's intention to perform first Pap testing. In this psychometric research, to determine the Content Validity Index (CVI) and the Content Validity Ratio (CVR), a panel of experts (n=10) reviewed scale items. Reliability was estimated through the Intraclass Correlation Coefficient (n=30) and internal consistency (n=240). Also, factor analysis (exploratory and conformity) was performed on the data of the sample women who had never had a Pap smear test (n=240). A 26-item questionnaire was developed. The CVI and CVR scores of the scale were 0.89 and 0.90, respectively. Exploratory factor analysis loaded a 26-item with seven factors questionnaire (perceived vulnerability and severity, fear, response costs, response efficacy, self-efficacy, and protection motivation (or intention)) that jointly accounted for 72.76% of the observed variance. Confirmatory factor analysis indicated a good fit for the data. Internal consistency (range 0.70-0.93) and test-retest reliability (range 0.72-0.96) of sub-scales were acceptable. This study showed that the designed instrument was a valid and reliable tool for measuring the factors influencing the women's intention to perform their first Pap testing.

  14. Adult anthropometric measures and socio-demographic factors influencing age at menarche of university students in malaysia.

    Science.gov (United States)

    Hossain, Md Golam; Wee, Ai-Sze; Ashaie, Maeirah; Kamarul, T

    2013-09-01

    Early onset of menarche has been shown to be associated with breast cancer and ischaemic heart disease. Studies on age at menarche of the Malaysian population are poorly documented. This study aimed to determine the influence of anthropometric and socio-demographic factors on the age at menarche of university students in Malaysia. Data were obtained in 2010-11 from 961 students between the ages of 18 and 25 years from the University of Malaya using stratified sampling, and multiple regression analysis was applied. Sixty-three per cent of students reached menarche at the age of 12 or 13 years, with the mean and median of age at menarche being 12.45 ± 1.17 and 12.01 years, respectively. Menarcheal age was positively associated with height (pObese and overweight students reached menarche earlier than students who were underweight or of normal weight (p<0.01). The variations in age at menarche among the Malaysian ethnic groups were statistically insignificant. The results suggest that heavier and first-born students from small families are more likely to attain menarche earlier than their counterparts.

  15. ENERGY EFFICIENCY. TRENDS AND INFLUENCE FACTORS

    Directory of Open Access Journals (Sweden)

    Zizi GOSCHIN

    2006-12-01

    Full Text Available Energy efficiency is correlated with many factors of influence: Gross National Income per capita, energy imports (% of energy use, renewable combustible and waste (% of total, energy use per capita, services as % of GDP and others. In this paper we are testing a model of piecewise linear regression with breakpoint in order to measure the influence of these factors on the variation of GDP per unit of energy use in Europe in the year 2003.

  16. Oral bioaccessibility of semi-volatile organic compounds (SVOCs) in settled dust: A review of measurement methods, data and influencing factors.

    Science.gov (United States)

    Raffy, Gaëlle; Mercier, Fabien; Glorennec, Philippe; Mandin, Corinne; Le Bot, Barbara

    2018-06-15

    Many semi-volatile organic compounds (SVOCs), suspected of reprotoxic, neurotoxic or carcinogenic effects, were measured in indoor settled dust. Dust ingestion is a non-negligible pathway of exposure to some of these SVOCs, and an accurate knowledge of the real exposure is necessary for a better evaluation of health risks. To this end, the bioaccessibility of SVOCs in dust needs to be considered. In the present work, bioaccessibility measurement methods, SVOCs' oral bioaccessibility data and influencing factors were reviewed. SVOC bioaccessibilities (%) ranged from 11 to 94, 8 to 100, 3 to 92, 1 to 81, 6 to 52, and 2 to 17, for brominated flame retardants, organophosphorus flame retardants, polychlorobiphenyls, phthalates, pesticides and polycyclic aromatic hydrocarbons, respectively. Measurements method produced varying results depending on the inclusion of food and/or sink in the model. Characteristics of dust, e.g., organic matter content and particle size, also influenced bioaccessibility data. Last, results were influenced by SVOC properties, such as octanol/water partition coefficient and migration pathway into dust. Factors related to dust and SVOCs could be used in prediction models. To this end, more bioaccessibility studies covering more substances should be performed, using methods that are harmonized and validated by comparison to in-vivo studies. Copyright © 2018 Elsevier B.V. All rights reserved.

  17. Factors influencing women's decisions to purchase specific ...

    African Journals Online (AJOL)

    aimed at identifying the factors that influence women's decisions to purchase specific .... influence of all the factors influencing their decision to purchase a selected .... one free” promotions seemed to have had the greatest influence on this ...

  18. FACTORS INFLUENCING SECOND LANGUAGE ACQUISITION

    Directory of Open Access Journals (Sweden)

    Siti Khasinah

    2014-05-01

    Full Text Available Motivation, attitude, age, intelligence, aptitude, cognitive style, and personality are considered as factors that greatly influence someone in the process of his or her second language acquisition. Experts state that those factors give a more dominant contribution in SLA to learners variedly, depend on who the learners are, their age, how they behave toward the language, their cognitive ability, and also the way they learn.

  19. Does Measurement Influence Behavior

    DEFF Research Database (Denmark)

    Schmidt, Marcus

    2014-01-01

    not access in their memory or that they otherwise would not form. Second, higher relative accessibility of intentions, compared with other inputs for purchase decisions may make subsequent purchase behavior more consistent with prior intentions. A couple of studies provide support of the self......The self-generated validity theory (Feldman and Lynch 1988) uses the following arguments: First, re-existing intentions may become more accessible in memory when the researcher asks the question. The measurement process thereby leads survey respondents to form judgments that they otherwise would...

  20. Factors influencing bone scan quality

    International Nuclear Information System (INIS)

    Adams, F.G.; Shirley, A.W.

    1983-01-01

    A reliable subjective method of assessing bone scan quality is described. A large number of variables which theoretically could influence scan quality were submitted to regression and factor analysis. Obesity, age, sex and abnormality of scan were found to be significant but weak variables. (orig.)

  1. What factors influence mitigative capacity?

    International Nuclear Information System (INIS)

    Winkler, Harald; Baumert, Kevin; Blanchard, Odile; Burch, Sarah; Robinson, John

    2007-01-01

    This article builds on Yohe's seminal piece on mitigative capacity, which elaborates 'determinants' of mitigative capacity, also reflected in the IPCC's third assessment report. We propose a revised definition, where mitigative capacity is a country's ability to reduce anthropogenic greenhouse gas emissions or enhance natural sinks. By 'ability' we mean skills, competencies, fitness, and proficiencies that a country has attained which can contribute to GHG emissions mitigation. A conceptual framework is proposed, linking mitigative capacity to a country's sustainable development path, and grouping the factors influencing mitigative capacity into three main sets: economic factors, institutional ones, and technology. Both quantitative and qualitative analysis of factors is presented, showing how these factors vary across countries. We suggest that it is the interplay between the three economic factors-income, abatement cost and opportunity cost-that shape mitigative capacity. We find that income is an important economic factor influencing mitigative capacity, while abatement cost is important in turning mitigative capacity into actual mitigation. Technology is a critical mitigative capacity, including the ability to absorb existing climate-friendly technologies or to develop innovative ones. Institutional factors that promote mitigative capacity include the effectiveness of government regulation, clear market rules, a skilled work force and public awareness. We briefly investigate such as high abatement cost or lack of political willingness that prevent mitigative capacity from being translated into mitigation

  2. Measuring methane emissions from a UK landfill using the tracer dispersion method and the influence of operational and environmental factors

    DEFF Research Database (Denmark)

    Rees-White, T.; Mønster, Jacob; Beaven, R. P.

    2018-01-01

    The methane emissions from a landfill in south-east, UK were successfully quantified during a six-day measurement campaign using the tracer dispersion method. The fair weather conditions made it necessary to perform measurements in the late afternoon and in the evening when the lower solar flux...

  3. Development and psychometric testing of a new instrument to measure factors influencing women's breast cancer prevention behaviors (ASSISTS).

    Science.gov (United States)

    Khazaee-Pool, Maryam; Majlessi, Fereshteh; Montazeri, Ali; Pashaei, Tahereh; Gholami, Ali; Ponnet, Koen

    2016-07-22

    Breast cancer preventive behaviors have an extreme effect on women's health. Despite the benefits of preventive behaviors regarding breast cancer, they have not been implemented as routine care for healthy women. To assess this health issue, a reliable and valid scale is needed. The aim of the present study is to develop and examine the psychometric properties of a new scale, called the ASSISTS, in order to identify factors that affect women's breast cancer prevention behaviors. A multi-phase instrument development method was performed to develop the questionnaire from February 2012 to September 2014. The item pool was generated based on secondary analyses of previous qualitative data. Then, content and face validity were applied to provide a pre-final version of the scale. The scale validation was conducted with a sample of women recruited from health centers affiliated with Tehran University of Medical Sciences. The construct validity (both exploratory and confirmatory), convergent validity, discriminate validity, internal consistency reliability and test-retest analysis of the questionnaire were tested. Fifty-eight items were initially extracted from the secondary analysis of previous qualitative data. After content validity, this was reduced to 49 items. The exploratory factor analysis revealed seven factors (Attitude, supportive systems, self-efficacy, information seeking, stress management, stimulant and self-care) containing 33 items that jointly accounted for 60.62 % of the observed variance. The confirmatory factor analysis showed a model with appropriate fitness for the data. The Cronbach's alpha coefficient for the subscales ranged from 0.68 to 0.85, and the Intraclass Correlation Coefficient (ICC) ranged from 0.71 to 0.98; which is well above the acceptable thresholds. The findings showed that the designed questionnaire was a valid and reliable instrument for assessing factors affecting women's breast cancer prevention behaviors that can be used both

  4. Factors influencing spring and summer areal snow ablation and snowcover depletion in alpine terrain: detailed measurements from the Canadian Rockies

    OpenAIRE

    Schirmer, Michael; Pomeroy, John W.

    2018-01-01

    The spatial distribution of snow water equivalent (SWE) and melt are important to estimating areal melt rates and snowcover depletion dynamics but are rarely measured in detail during the late ablation period. This study contributes the result of high resolution observations made using large numbers of sequential aerial photographs taken from an Unmanned Aerial Vehicle on an alpine ridge in the Fortress Mountain Snow Laboratory in the Canadian Rocky Mountains from May to July. With Structure-...

  5. The influence of external factors on the accuracy of non-invasive measuring of oxygen in blood

    Directory of Open Access Journals (Sweden)

    Y. M. Snizhko

    2016-05-01

    Full Text Available In this paper we investigated a pulse oximetry-based method for mobile devices. This method obtains bio-signals related to blood pulsation in transparent parts of body. The most widely accepted field for use of this method is hospital care. In these cases a pulse oximeter is the best solution for the monitoring of emergency patients. A promising field for pulse oximetry is physical exercise. It only requires simple clips such as ear-clips, finger-clips, headbands etc. However this method presents some difficulties: weak signal, noise ratio, motion artefacts, low perfusion. We used a MAX30100 Oximeter and Heart Rate Sensor integrated circuit to obtain signals of blood pulse waves from red and infrared light emission diodes (LED. This device measures the oxygen saturation of a person’s blood by placing an LED and a photodetector against the thin skin of a person’s body, such as a fingertip, wrist or earlobe. The MAX30100 is a 14-pin surface mount integrated circuit that contains sensors for measuring a person’s heart rate. It can also indirectly determine the oxygen saturation of a person’s blood. The MAX30100 provides a complete pulse oximetry and heart rate measurement solution for medical monitors and wearable fitness devices. As each LED emits light into a person’s finger, the integrated photodetector measures variations in light caused by changes in blood volume. An integrated 16-bit analog to digital converter (ADC with programmable sample rate converts the photodetector output to a digital value. The MAX30100 filters out ambient light that can interfere with an accurate reading. Data are read through a serial I2C interface to computer for further processing. The LED current can be programmed from 0 to 50 mA with proper supply voltage. The LED pulse width can be programmed from 200 µs to 1.6 ms to optimize measurement accuracy and power consumption based on use cases. The SpO2 algorithm is relatively insensitive to the wavelength

  6. College factors that influence drinking.

    Science.gov (United States)

    Presley, Cheryl A; Meilman, Philip W; Leichliter, Jami S

    2002-03-01

    The purpose of this article is to examine the aspects of collegiate environments, rather than student characteristics, that influence drinking. Unfortunately, the existing literature is scant on this topic. A literature review of articles primarily published within the last 10 years, along with some earlier "landmark" studies of collegiate drinking in the United States, was conducted to determine institutional factors that influence the consumption of alcohol. In addition, a demonstration analysis of Core Alcohol and Drug Survey research findings was conducted to further elucidate the issues. Several factors have been shown to relate to drinking: (1) organizational property variables of campuses, including affiliations (historically black institutions, women's institutions), presence of a Greek system, athletics and 2- or 4-year designation; (2) physical and behavioral property variables of campuses, including type of residence, institution size, location and quantity of heavy episodic drinking; and (3) campus community property variables, including pricing and availability and outlet density. Studies, however, tend to look at individual variables one at a time rather than in combination (multivariate analyses). Some new analyses, using Core Alcohol and Drug Survey data sets, are presented as examples of promising approaches to future research. Given the complexities of campus environments, it continues to be a challenge to the field to firmly establish the most compelling institutional and environmental factors relating to high-risk collegiate drinking.

  7. Factors Influencing Healthcare Service Quality

    Directory of Open Access Journals (Sweden)

    Ali Mohammad Mosadeghrad

    2014-07-01

    Full Text Available Background The main purpose of this study was to identify factors that influence healthcare quality in the Iranian context. Methods Exploratory in-depth individual and focus group interviews were conducted with 222 healthcare stakeholders including healthcare providers, managers, policy-makers, and payers to identify factors affecting the quality of healthcare services provided in Iranian healthcare organisations. Results Quality in healthcare is a production of cooperation between the patient and the healthcare provider in a supportive environment. Personal factors of the provider and the patient, and factors pertaining to the healthcare organisation, healthcare system, and the broader environment affect healthcare service quality. Healthcare quality can be improved by supportive visionary leadership, proper planning, education and training, availability of resources, effective management of resources, employees and processes, and collaboration and cooperation among providers. Conclusion This article contributes to healthcare theory and practice by developing a conceptual framework that provides policy-makers and managers a practical understanding of factors that affect healthcare service quality.

  8. Measuring discursive influence across scholarship.

    Science.gov (United States)

    Gerow, Aaron; Hu, Yuening; Boyd-Graber, Jordan; Blei, David M; Evans, James A

    2018-03-27

    Assessing scholarly influence is critical for understanding the collective system of scholarship and the history of academic inquiry. Influence is multifaceted, and citations reveal only part of it. Citation counts exhibit preferential attachment and follow a rigid "news cycle" that can miss sustained and indirect forms of influence. Building on dynamic topic models that track distributional shifts in discourse over time, we introduce a variant that incorporates features, such as authorship, affiliation, and publication venue, to assess how these contexts interact with content to shape future scholarship. We perform in-depth analyses on collections of physics research (500,000 abstracts; 102 years) and scholarship generally (JSTOR repository: 2 million full-text articles; 130 years). Our measure of document influence helps predict citations and shows how outcomes, such as winning a Nobel Prize or affiliation with a highly ranked institution, boost influence. Analysis of citations alongside discursive influence reveals that citations tend to credit authors who persist in their fields over time and discount credit for works that are influential over many topics or are "ahead of their time." In this way, our measures provide a way to acknowledge diverse contributions that take longer and travel farther to achieve scholarly appreciation, enabling us to correct citation biases and enhance sensitivity to the full spectrum of scholarly impact. Copyright © 2018 the Author(s). Published by PNAS.

  9. Dielectric properties of agricultural products – fundamental principles, influencing factors, and measurement technirques. Chapter 4. Electrotechnologies for Food Processing: Book Series. Volume 3. Radio-Frequency Heating

    Science.gov (United States)

    In this chapter, definitions of dielectric properties, or permittivity, of materials and a brief discussion of the fundamental principles governing their behavior with respect to influencing factors are presented. The basic physics of the influence of frequency of the electric fields and temperatur...

  10. Factors Influencing Learner Permit Duration

    Directory of Open Access Journals (Sweden)

    Johnathon P. Ehsani

    2016-12-01

    Full Text Available An increasing number of countries are requiring an extended learner permit prior to independent driving. The question of when drivers begin the learner permit period, and how long they hold the permit before advancing to independent licensure has received little research attention. Licensure timing is likely to be related to “push” and “pull” factors which may encourage or inhibit the process. To examine this question, we recruited a sample of 90 novice drivers (49 females and 41 males, average age of 15.6 years soon after they obtained a learner permit and instrumented their vehicles to collect a range of driving data. Participants completed a series of surveys at recruitment related to factors that may influence licensure timing. Two distinct findings emerged from the time-to-event analysis that tested these push and pull factors in relation to licensure timing. The first can be conceptualized as teens’ motivation to drive (push, reflected in a younger age when obtaining a learner permit and extensive pre-permit driving experience. The second finding was teens’ perceptions of their parents’ knowledge of their activities (pull; a proxy for a parents’ attentiveness to their teens’ lives. Teens who reported higher levels of their parents’ knowledge of their activities took longer to advance to independent driving. These findings suggest time-to-licensure may be related to teens’ internal motivation to drive, and the ability of parents to facilitate or impede early licensure.

  11. Factors influencing knowledge and practice of exclusive ...

    African Journals Online (AJOL)

    Factors influencing knowledge and practice of exclusive breastfeeding in Nyando ... The overall objective of this study was to determine factors influencing the ... EBF and its benefits), pre lacteal feeds and exclusive breastfeeding consistency.

  12. Influence of organizational factors on safety

    International Nuclear Information System (INIS)

    Haber, S.B.; Metlay, D.S.; Crouch, D.A.

    1990-01-01

    There is a need for a better understanding of exactly how organizational management factors at a nuclear power plant (NPP) affect plant safety performance, either directly or indirectly, and how these factors might be observed, measured, and evaluated. The purpose of this research project is to respond to that need by developing a general methodology for characterizing these organizational and management factors, systematically collecting information on their status and integrating that information into various types of evaluative activities. Research to date has included the development of the Nuclear Organization and Management Analysis Concept (NOMAC) of a NPP, the identification of key organizational and management factors, and the identification of the methods for systematically measuring and analyzing the influence of these factors on performance. Most recently, two field studies, one at a fossil fuel plant and the other at a NPP, were conducted using the developed methodology. Results are presented from both studies highlighting the acceptability, practicality, and usefulness of the methods used to assess the influence of various organizational and management factors including culture, communication, decision-making, standardization, and oversight. 6 refs., 3 figs., 1 tab

  13. Factors influencing the pattern of malnutrition among acutely ill ...

    African Journals Online (AJOL)

    Factors influencing the pattern of malnutrition among acutely ill children presenting in ... height/length) measurements and z-scores calculated for the individual nutritional ... The factors associated with malnutrition included early introduction of ...

  14. Factors influencing the cardiac MIBG accumulation

    International Nuclear Information System (INIS)

    Takatsu, Hisato; Fujiwara, Hisayoshi

    1997-01-01

    Following factors possibly influencing the cardiac MIBG accumulation were examined mainly in mice. 1. The specific activity of the MIBG (meta-iodo-benzyl guanidine) on the neuronal and non-neuronal fractions. 2. Motor restriction stress on MIBG accumulation and washout. 3. Loading and restriction of sodium chloride on the accumulation and effect of suppression of renin-angiotensin system. 4. Examinations in Dahl rats. 125I- or 131I-MIBG was intravenously administered to mice at 74 kBq. At 30 min or 4 hr after administration, mice were sacrificed and their left ventricles were dissected out for measurement of radioactivity in a liquid scintillation counter. Salt-sensitive and -resistant Dahl rats were given with 37 MBq of 123I-MIBG and cardiac radioactivity was measured externally for calculation of washout. Factors examined were found highly correlated with the accumulation of MIBG and measurement of its washout was considered useful for evaluating sympathetic activity. (K.H.)

  15. Physiological factors influencing capillary growth.

    Science.gov (United States)

    Egginton, S

    2011-07-01

    (1) Angiogenesis (growth of new capillaries from an existing capillary bed) may result from a mismatch in microvascular supply and metabolic demand (metabolic error signal). Krogh examined the distribution and number of capillaries to explore the correlation between O(2) delivery and O(2) consumption. Subsequently, the heterogeneity in angiogenic response within a muscle has been shown to reflect either differences in fibre type composition or mechanical load. However, local control leads to targetted angiogenesis in the vicinity of glycolytic fibre types following muscle stimulation, or oxidative fibres following endurance training, while heterogeneity of capillary spacing is maintained during ontogenetic growth. (2) Despite limited microscopy resolution and lack of specific markers, Krogh's interest in the structure of the capillary wall paved the way for understanding the mechanisms of capillary growth. Angiogenesis may be influenced by the response of perivascular or stromal cells (fibroblasts, macrophages and pericytes) to altered activity, likely acting as a source for chemical signals modulating capillary growth such as vascular endothelial growth factor. In addition, haemodynamic factors such as shear stress and muscle stretch play a significant role in adaptive remodelling of the microcirculation. (3) Most indices of capillarity are highly dependent on fibre size, resulting in possible bias because of scaling. To examine the consequences of capillary distribution, it is therefore helpful to quantify the area of tissue supplied by individual capillaries. This allows the spatial limitations inherent in most models of tissue oxygenation to be overcome generating an alternative approach to Krogh's tissue cylinder, the capillary domain, to improve descriptions of intracellular oxygen diffusion. © 2010 The Author. Acta Physiologica © 2010 Scandinavian Physiological Society.

  16. Factors Influencing HEPA Filter Performance

    International Nuclear Information System (INIS)

    Parsons, M.S.; Waggoner, Ch.A.

    2009-01-01

    Properly functioning HEPA air filtration systems depend on a variety of factors that start with the use of fully characterized challenge conditions for system design and then process control during operation. This paper addresses factors that should be considered during the design phase as well as operating parameters that can be monitored to ensure filter function and lifetime. HEPA filters used in nuclear applications are expected to meet design, fabrication, and performance requirements set forth in the ASME AG-1 standard. The DOE publication Nuclear Air Cleaning Handbook (NACH) is an additional guidance document for design and operation HEPA filter systems in DOE facilities. These two guidelines establish basic maximum operating parameters for temperature, maximum aerosol particle size, maximum particulate matter mass concentration, acceptable differential pressure range, and filter media velocity. Each of these parameters is discussed along with data linking variability of each parameter with filter function and lifetime. Temporal uncertainty associated with gas composition, temperature, and absolute pressure of the air flow can have a direct impact on the volumetric flow rate of the system with a corresponding impact on filter media velocity. Correlations between standard units of flow rate (standard meters per minute or cubic feet per minute) versus actual units of volumetric flow rate are shown for variations in relative humidity for a 70 deg. C to 200 deg. C temperature range as an example of gas composition that, uncorrected, will influence media velocity. The AG-1 standard establishes a 2.5 cm/s (5 feet per minute) ceiling for media velocities of nuclear grade HEPA filters. Data are presented that show the impact of media velocities from 2.0 to 4.0 cm/s media velocities (4 to 8 fpm) on differential pressure, filter efficiency, and filter lifetime. Data will also be presented correlating media velocity effects with two different particle size

  17. FACTORS INFLUENCING THE EVOLUTION OF YOUTH TRAVEL

    Directory of Open Access Journals (Sweden)

    Student Claudia MOISĂ

    2010-01-01

    Full Text Available Youth travel is an important part of global tourism, consequently, getting to know the evolution of this form of tourism requires an approach of the aspects regarding the permissive and restrictive factors that influence the youth travel dynamic worldwide. In terms of the factors that influence youth travel, we highlighted these two categories of factors (permissive and restrictive and, within each category, we tried to singularize the influence of every factor over youth travel.

  18. Factors influencing boar sperm cryosurvival.

    Science.gov (United States)

    Roca, J; Hernández, M; Carvajal, G; Vázquez, J M; Martínez, E A

    2006-10-01

    Optimal sperm cryopreservation is a prerequisite for the sustainable commercial application of frozen-thawed boar semen for AI. Three experiments were performed to identify factors influencing variability of postthaw sperm survival among 464 boar ejaculates. Sperm-rich ejaculate fractions were cryopre-served using a standard freezing-thawing procedure for 0.5-mL plastic straws and computer-controlled freezing equipment. Postthaw sperm motility (assessed with a computer-assisted semen analysis system) and viability (simultaneously probed by flow cytometry analysis after triple-fluorescent stain), evaluated 30 and 150 min postthaw, were used to estimate the success of cryopreservation. In the first experiment, 168 unselected ejaculates (1 ejaculate/boar), from boars of 6 breeds with a wide age range (8 to 48 mo), were cryopreserved over a 12-mo period to evaluate the predictive value of boar (breed and age), semen collection, transport variables (season of ejaculate collection, interval between collections, and ejaculate temperature exposure), initial semen traits, and sperm quality before freezing on sperm survival after freezing-thawing. In Exp. 2, 4 ejaculates from each of 29 boars, preselected according to their initial semen traits and sperm quality before freezing, were collected and frozen over a 6-mo period to evaluate the influence of interboar and intraboar ejaculate variability in the survival of sperm after cryopreservation. In Exp. 3, 12 ejaculates preselected as for Exp. 2, from each of 15 boars with known good sperm cryosurvival, were collected and frozen over a 12-mo period to estimate the sustainability of sperm cryosurvival between ejaculates over time. Boar and semen collection and transport variables were not predictive of sperm cryosurvival among ejaculates. Initial semen traits and sperm quality variables observed before freezing explained 23.2 and 10.9%, respectively, of the variation in postthaw sperm motility and viability. However, more that

  19. Factors that negatively influence consumption of traditionally ...

    African Journals Online (AJOL)

    Factors that negatively influence consumption of traditionally fermented milk ... in various countries of sub-Saharan Africa and a number of health benefits to human ... influence consumption of Mursik, a traditionally fermented milk product from ...

  20. Influence Factors of the Economic Development Level Across European Countries

    OpenAIRE

    Diana Ioana POPA

    2016-01-01

    The economic development level of a country refers to the measure of the progress in an economy that could be measured, especially through GDP or GDP per capita. The level of these indicators can be influenced by many factors as a large scale, from social and economical to environmental and government policies factors. The paper aims to investigate some of these influence factors of the economic development level, represented in this case by GDP per capita, across European countries in the...

  1. Demotivating factors influencing rubber production workers

    Directory of Open Access Journals (Sweden)

    Mohammad Reza Iravani

    2012-01-01

    Full Text Available Motivation is one of the most important factors influencing workers' productivity. An increase in workers' motivation could add more value to organizations' structure and influence the profitability, significantly. In this paper, we study different factors on demotivating workers using questionnaire consist of various questions. The questionnaire is distributed among some employees who work for rubber production units located in Esfahan, Iran. The results of this survey indicate that discrimination on annual job compensation, entrusting responsibilities and unpleasant relationship with family partner are some of the most important factors influencing employees' motivation. While financial factors play important role on increasing employees' motivation, non-financial factors are considered more important.

  2. Factors influencing thermal tolerances of individual organisms

    International Nuclear Information System (INIS)

    Hutchison, V.H.

    1976-01-01

    The diversity of experimental methods and terminology employed by investigators to measure the effects of high temperatures on individual organisms, plus the often overlooked complexities of the holocoenotic environment, has often led to disconcerting conclusions. A plea is made for standardization of testing methods and for a wider appreciation of factors that may alter thermal tolerances. The influence of elevated temperature is grouped into three categories, lethal effects, controlling effects, and directive effects, all of which should be considered in assessing the impact of thermal effluent on organisms. In addition, the terminology (acclimation, acclimatization, adaptation, habituation, lethal temperature, critical thermal maximum, etc.) needs standardized definitions. The important factors influencing thermal effects on organisms include photoperiod, seasonal and daily cycles, geographic variation, diet, sex, breeding condition, age, life-cycle stage, salinity, chemicals, body water content and partitioning, oxygen supply, pH, innate and learned behavior, history of thermal exposure, sublethal exposure to limiting factors, and experimental methods. Examples of most of these are given to illustrate the role of temperature in the holocoenotic environmental complex of individual organisms

  3. What Factors Influence Wind Perceptions

    Science.gov (United States)

    Stein, Tatiana

    Over the last decade, wind power has emerged as a possible source of energy and has attracted the attention of homeowners and policy makers worldwide. Many technological hurdles have been overcome in the last few years that make this technology feasible and economical. The United States has added more wind power than any other type of electric generation in 2012. Depending on the location, wind resources have shown to have the potential to offer 20% of the nation's electricity; a single, large wind turbine has the capacity to produce enough electricity to power 350 homes. Throughout the development of wind turbines, however, energy companies have seen significant public opposition towards the tall white structures. The purpose of this research was to measure peoples' perceptions on wind turbine development throughout their growth, from proposal to existing phase. Three hypotheses were developed based on the participant's political affiliation, proximity and knowledge of wind turbines. To validate these hypotheses, participants were asked an array of questions regarding their perception on economic, environmental, and social impacts of wind turbines with an online service called Amazon Mechanical Turk. The responses were from residents living in the United States and required them to provide their zip code for subsequent analysis. The analysis from the data obtained suggests that participants are favorable towards wind turbine development and would be supportive of using the technology in their community. Political affiliation and proximity to the nearest wind turbine in any phase of development (proposal, construction, existing) were also analyzed to determine if they had an effect on a person's overall perception on wind turbines and their technology. From the analysis, political affiliation was seen to be an indirect factor to understanding favorability towards wind turbines; the more liberal you are, the more supportive you will be towards renewable energy use

  4. Factors Influencing Substance Abuse among Undergraduate ...

    African Journals Online (AJOL)

    The study investigated the factors influencing substance abuse amongundergraduate students in Osun State; Nigeria. A sample of 1, 200undergraduate students were randomly selected from three tertiaryinstitution in Osun State. Factors Influencing Substance Abuse Questionnaire (FISA) was developed by the researcher ...

  5. Factors influencing customer satisfaction with reference and ...

    African Journals Online (AJOL)

    This paper examines factors influencing customer satisfaction with reference and information services in an academic environment. The paper identifies types of reference services in libraries, factors influencing customer satisfaction and dissatisfaction with reference and information services and suggested the way forward ...

  6. Factors Influencing Livelihood Diversification among Rural Farmers ...

    African Journals Online (AJOL)

    This research study was set out to analyze factors influencing rural farmer's engagement in livelihood diversification in the study area. The specific objectives were; to identify the different levels of farmers' engagement in livelihood diversification, determine the socio-demographic factors or forces that influence farmers' ...

  7. Factors Influencing Endometrial Thickness in Postmenopausal Women

    African Journals Online (AJOL)

    Background: Cut‑off values for endometrial thickness (ET) in asymptomatic postmenopausal woman have been standardized. However, there are no comprehensive studies to document how various factors can influence the ET after the age of menopause. Aim: To study the various factors influencing the ET in ...

  8. Automation bias: empirical results assessing influencing factors.

    Science.gov (United States)

    Goddard, Kate; Roudsari, Abdul; Wyatt, Jeremy C

    2014-05-01

    To investigate the rate of automation bias - the propensity of people to over rely on automated advice and the factors associated with it. Tested factors were attitudinal - trust and confidence, non-attitudinal - decision support experience and clinical experience, and environmental - task difficulty. The paradigm of simulated decision support advice within a prescribing context was used. The study employed within participant before-after design, whereby 26 UK NHS General Practitioners were shown 20 hypothetical prescribing scenarios with prevalidated correct and incorrect answers - advice was incorrect in 6 scenarios. They were asked to prescribe for each case, followed by being shown simulated advice. Participants were then asked whether they wished to change their prescription, and the post-advice prescription was recorded. Rate of overall decision switching was captured. Automation bias was measured by negative consultations - correct to incorrect prescription switching. Participants changed prescriptions in 22.5% of scenarios. The pre-advice accuracy rate of the clinicians was 50.38%, which improved to 58.27% post-advice. The CDSS improved the decision accuracy in 13.1% of prescribing cases. The rate of automation bias, as measured by decision switches from correct pre-advice, to incorrect post-advice was 5.2% of all cases - a net improvement of 8%. More immediate factors such as trust in the specific CDSS, decision confidence, and task difficulty influenced rate of decision switching. Lower clinical experience was associated with more decision switching. Age, DSS experience and trust in CDSS generally were not significantly associated with decision switching. This study adds to the literature surrounding automation bias in terms of its potential frequency and influencing factors. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  9. Emergency Department Crowding: Factors Influencing Flow

    Directory of Open Access Journals (Sweden)

    Arkun, Alp

    2010-02-01

    Full Text Available Background: The objective of this study was to evaluate those factors, both intrinsic and extrinsic to the emergency department (ED that influence two specific components of throughput: “door-to-doctor” time and dwell time.Methods: We used a prospective observational study design to determine the variables that played a significant role in determining ED flow. All adult patients seen or waiting to be seen in the ED were observed at 8pm (Monday-Friday during a three-month period. Variables measured included daily ED volume, patient acuity, staffing, ED occupancy, daily admissions, ED boarder volume, hospital volume, and intensive care unit volume. Both log-rank tests and time-to-wait (survival proportional-hazard regression models were fitted to determine which variables were most significant in predicting “door-to-doctor” and dwell times, with full account of the censoring for some patients.Results: We captured 1,543 patients during our study period, representing 27% of total daily volume. The ED operated at an average of 85% capacity (61-102% with an average of 27% boarding. Median “door-to-doctor” time was 1.8 hours, with the biggest influence being triage category, day of the week, and ED occupancy. Median dwell time was 5.5 hours with similar variable influences.Conclusion: The largest contributors to decreased patient flow through the ED at our institution were triage category, ED occupancy, and day of the week. Although the statistically significant factors influencing patient throughput at our institution involve problems with inflow, an increase in ED occupancy could be due to substantial outflow obstruction and may indicate the necessity for increased capacity both within the ED and hospital. [West J Emerg Med. 2010; 11(1:10-15

  10. Emergency department crowding: factors influencing flow.

    Science.gov (United States)

    Arkun, Alp; Briggs, William M; Patel, Sweha; Datillo, Paris A; Bove, Joseph; Birkhahn, Robert H

    2010-02-01

    THE OBJECTIVE OF THIS STUDY WAS TO EVALUATE THOSE FACTORS, BOTH INTRINSIC AND EXTRINSIC TO THE EMERGENCY DEPARTMENT (ED) THAT INFLUENCE TWO SPECIFIC COMPONENTS OF THROUGHPUT: "door-to-doctor" time and dwell time. We used a prospective observational study design to determine the variables that played a significant role in determining ED flow. All adult patients seen or waiting to be seen in the ED were observed at 8pm (Monday-Friday) during a three-month period. Variables measured included daily ED volume, patient acuity, staffing, ED occupancy, daily admissions, ED boarder volume, hospital volume, and intensive care unit volume. Both log-rank tests and time-to-wait (survival) proportional-hazard regression models were fitted to determine which variables were most significant in predicting "door-to-doctor" and dwell times, with full account of the censoring for some patients. We captured 1,543 patients during our study period, representing 27% of total daily volume. The ED operated at an average of 85% capacity (61-102%) with an average of 27% boarding. Median "door-to-doctor" time was 1.8 hours, with the biggest influence being triage category, day of the week, and ED occupancy. Median dwell time was 5.5 hours with similar variable influences. The largest contributors to decreased patient flow through the ED at our institution were triage category, ED occupancy, and day of the week. Although the statistically significant factors influencing patient throughput at our institution involve problems with inflow, an increase in ED occupancy could be due to substantial outflow obstruction and may indicate the necessity for increased capacity both within the ED and hospital.

  11. Measurements of VOC/SVOC emission factors from burning incenses in an environmental test chamber: influence of temperature, relative humidity, and air exchange rate.

    Science.gov (United States)

    Manoukian, A; Buiron, D; Temime-Roussel, B; Wortham, H; Quivet, E

    2016-04-01

    This study investigates the influence of three environmental indoor parameters (i.e., temperature, relative humidity, and air exchange rate) on the emission of 13 volatile organic compounds (VOCs) and semi-volatile organic compounds (SVOCs) during incense burning. Experiments have been carried out using an environmental test chamber. Statistical results from a classical two-level full factorial design highlight the predominant effect of ventilation on emission factors. The higher the ventilation, the higher the emission factor. Moreover, thanks to these results, an estimation of the concentration range for the compounds under study can be calculated and allows a quick look of indoor pollution induced by incense combustion. Carcinogenic substances (i.e., benzene, benzo(a)pyrene, and formaldehyde) produced from the incense combustion would be predicted in typical living indoors conditions to reach instantaneous concentration levels close to or higher than air quality exposure threshold values.

  12. Factors influencing energy efficiency investments in existing Swedish residential buildings

    International Nuclear Information System (INIS)

    Nair, Gireesh; Gustavsson, Leif; Mahapatra, Krushna

    2010-01-01

    We used the data from a survey conducted in 2008 of 3,000 owners of detached houses to analyse the factors that influence the adoption of investment measures to improve the energy efficiency of their buildings. For the majority of Swedish homeowners, it was important to reduce their household energy use, and most of them undertook no-cost measures as compared to investment measures. Personal attributes such as income, education, age and contextual factors, including age of the house, thermal discomfort, past investment, and perceived energy cost, influence homeowners' preference for a particular type of energy efficiency measure. The implications for promoting the implementation of energy efficiency investment measures are discussed.

  13. Factors Influencing Physical Fitness Evaluation.

    Science.gov (United States)

    Haarer, Barbara G.

    This annotated bibliography focuses on works that examine areas in which the physical educator can improve the administration of physical fitness tests in the elementary and secondary schools. The first part contains annotations that examine modifications of existing components which measure aspects of muscular and cardiovascular endurance. The…

  14. Human Factors Influencing Decision Making

    Science.gov (United States)

    1998-07-01

    and Einhom (1991); Zeelenberg et al. (1997). This environmental context also makes it difficult to associate measured personality traits with specific... Zeelenberg and Beattie5 (1997): People are motivated to minimize post-decision regret. As a result people can become risk averse or risk seeking...188-201), Ablex, Norwood NJ, 1993. 5 Zeelenberg M. and J. Beattie. "Consequences of regret aversion 2: additional evidence for effects of feedback on

  15. Factors influencing endometrial thickness in postmenopausal women.

    Science.gov (United States)

    Hebbar, S; Chaya, V; Rai, L; Ramachandran, A

    2014-07-01

    Cut-off values for endometrial thickness (ET) in asymptomatic postmenopausal woman have been standardized. However, there are no comprehensive studies to document how various factors can influence the ET after the age of menopause. To study the various factors influencing the ET in postmenopausal women. This was a prospective observational study. A total of 110 postmenopausal women underwent detailed history taking, clinical examination, and transvaginal scan for uterine volume and ovarian volume. The volumes were calculated by using ellipsoid formula: Width × thickness × height × 0.523. The variation in ET with respect to the influencing factors such as age, duration of menopause, parity, body mass index (BMI), medical illness like diabetes/hypertension, drugs like tamoxifen, presence of myoma, uterine volume, ovarian volume, and serum estradiol (in selected patients) were measured. Descriptive analysis was performed using SPSS software (version 16, Chicago II, USA) to obtain mean, standard deviation (SD), 95% confidence intervals (CIs) and inter quartile ranges. Comparison of means was carried out using analysis of variance. The mean (SD) age of the patients was 55.4 (6.91) years (95% CI, 54.1, 56.7). The mean (SD) age at menopause was 47.95 (3.90) years (95% CI, 47.2, 48.7) and the mean (SD) duration of menopause was 7.27 (6.65) years (95% CI, 6.01, 8.53). The mean (SD) ET was 3.8 (2.3) mm (95% CI, 3.36, 4.23). Medical illness like diabetes and hypertension did not alter the ET. ET increased as BMI increased and it was statistically significant. The presence of myoma increased uterine volume significantly and was associated with thick endometrial stripe. Similarly, whenever the ovaries were visualized and as the ovarian volume increased, there was an increase in ET. When ET was > 4 mm (n = 37), they were offered endocel, of which 16 agreed to undergo the procedure. None were found to have endometrial cancer. This study suggests that parity, BMI, presence of

  16. Community Factors Influencing Birth Spacing among Married ...

    African Journals Online (AJOL)

    AJRH Managing Editor

    level factors on birth spacing behaviour in Uganda and Zimbabwe, to ... environments as potential influences on birth spacing ..... health: multivariable cross-country analysis, MACRO ... Equity monitoring for social marketing: Use of wealth.

  17. Factors Influencing Self Employment Media Service Providers ...

    African Journals Online (AJOL)

    Factors Influencing Self Employment Media Service Providers among Tertiary ... role stereotype and common business practices on media self employment in ... Sex, Psycho-social Characteristics, self Employment, Providing Media Services.

  18. Influence of Macroeconomic Factors on Residential Property ...

    African Journals Online (AJOL)

    Sultan

    exerted by macroeconomic factors on residential property returns in Abuja. The backward .... explanatory power and positive influence of employment and ...... Project. Management In Property Development: the Nigeria experience. Ibadan:.

  19. Factors Influencing Adoption of Cocoa Technologies Disseminated ...

    African Journals Online (AJOL)

    Factors Influencing Adoption of Cocoa Technologies Disseminated by Olam Organisation in ... Journal of Agricultural Research and Development ... level, household size, no of farm family assisting on the farm, management system adopted, ...

  20. Assessment of Factors Influencing Beneficiary Participation in ...

    African Journals Online (AJOL)

    ISSN 0794-5698. Assessment of Factors Influencing Beneficiary Participation in Fadama II Project ... project implementation (80%) in the stages of project development. Women .... the project as they appeared to have more family burden to ...

  1. Factors influencing detail detectability in radiologic imaging

    International Nuclear Information System (INIS)

    Gurvich, A.M.

    1985-01-01

    The detectability of various details is estimated quantitatively from the essential technical parameters of the imaging system and additional influencing factors including viewing of the image. The analysis implies the formation of the input radiation distribution (contrast formation, influence of kVp). Noise, image contrast (gamma), modulation transfer function and contrast threshold of the observer are of different influence on details of different size. Thus further optimization of imaging systems and their adaption to specific imaging tasks are facilitated

  2. Influence of organizational factors on performance reliability

    International Nuclear Information System (INIS)

    Haber, S.B.; O'Brien, J.N.; Metlay, D.S.; Crouch, D.A.

    1991-12-01

    This is the first volume of a two-volume report. Volume 2 will be published at a later date. This report presents the results of a research project conducted by Brookhaven National Laboratory for the United States Nuclear Regulatory Commission, Office of Nuclear Regulatory Research. The purpose of the project was to develop a general methodology to be use in the assessment of the organizational factors which affect performance reliability (safety) in a nuclear power plant. The research described in this report includes the development of the Nuclear Organization and Management Analysis Concept (GNOMIC). This concept characterizes the organizational factors that impact safety performance in a nuclear power plant and identifies some methods for systematically measuring and analyzing the influence of these factors on safety performance. This report is divided into two parts; Part 1 presents an overview of the development of the methodology, while Part 2 provides more details and a technical analysis of the methodological development. Specifically, the results of two demonstration studies, the feasibility of the methodology, and a specific applications for which the methodology was developed are presented

  3. Factors Influencing Title VII Bilingual Program Institutionalization.

    Science.gov (United States)

    Lewis, Gerald R.; And Others

    1985-01-01

    This study of the primary restraining and driving forces that influence Title VII bilingual education programs found the external environment, the local community, to be the main factor influencing institutionalization and self-renewal. The internal environment--the local school, and the local school's organization or central office, school board,…

  4. Factors influencing bonding fixed restorations

    Directory of Open Access Journals (Sweden)

    Medić Vesna

    2008-01-01

    Full Text Available INTRODUCTION Crown displacement often occurs because the features of tooth preparations do not counteract the forces directed against restorations. OBJECTIVE The purpose of this study was to evaluate the effect of preparation designs on retention and resistance of fixed restorations. METHOD The study was performed on 64 differently sized stainless steel dies. Also, caps which were used for evaluated retention were made of stainless steel for each die. After cementing the caps on experimental dies, measuring of necessary tensile forces to separate cemented caps from dies was done. Caps, which were made of a silver-palladium alloy with a slope of 60° to the longitudinal axis formed on the occlusal surface, were used for evaluating resistance. A sudden drop in load pressure recorded by the test machine indicated failure for that cap. RESULTS A significant difference was found between the tensile force required to remove the caps from the dies with different length (p<0.05 and different taper (p<0.01. The greatest retentive strengths (2579.2 N and 2989.8 N were noticed in experimental dies with the greatest length and smallest taper. No statistically significant (p>0.05 differences were found between tensile loads for caps cemented on dies with different diameter. Although there was an apparent slight increase in resistance values for caps on dies with smaller tapers, the increase in resistance for those preparation designs was not statistically significant. There was a significant difference among the resistance values for caps on dies with different length (p<0.01 and diameter (p<0.05. CONCLUSION In the light of the results obtained, it could be reasonably concluded that retention and resistance of the restoration is in inverse proportion to convergence angle of the prepared teeth. But, at a constant convergence angle, retention and resistance increase with rising length and diameter.

  5. Accurate technetium-99 determination using the combination of TEVA resin pretreatment and ICP-MS measurement and its influence on the Tc-99/Cs-137 scaling factor calculation

    International Nuclear Information System (INIS)

    Lian-Song Chen; Tsing-Hai Wang; Yi-Kong Hsieh; Li-Wei Jian; Wie-Han Chen; Chu-Fang Wang; Tsuey-Lin Tsai

    2014-01-01

    Accurate determination of technetium-99 (Tc-99) is very important because any overestimation will cause the examined radioactive wastes to be categorized into super C class, which dramatically increases the cost of waste management. Herein, we demonstrated that by adopting the analytical method comprising TEVA resin pretreatment and ICP-MS measurement, the determined Tc-99 concentrations in representative waste stream samples from the Lan-Yu low-level radioactive waste temporary storage site in Taiwan were approximately two orders of magnitude lower than those determined from the beta radiation measurement using a low background liquid scintillation counter. Two important concerns emerged from our results. First, severe interferences from other nuclides residing in the matrix considerably affect the determination of Tc-99, even when a low background liquid scintillation counter was used. Second, the currently used Tc-99/Cs-137 scaling factor should be carefully revised, or it might lead to a considerable overestimation of the Tc-99 concentration. (author)

  6. What factors influence the health status of patients with rheumatoid arthritis measured by the SF-12v2 Health Survey and the Health Assessment Questionnaire?

    DEFF Research Database (Denmark)

    Linde, Louise; Sørensen, Jan; Østergaard, Mikkel

    2009-01-01

    OBJECTIVE: The Health Assessment Questionnaire Disability Index (HAQ) is a widely used outcome measure in rheumatoid arthritis (RA), whereas the SF-12v2 Health Survey (SF-12) was introduced recently. We investigated how the HAQ and SF-12 were associated with socio-demographic, lifestyle, and dise...... to differences in demographic, lifestyle, and disease- and treatment-related factors than the SF-12. The established clinical value and feasibility of the HAQ highlights its advantages over the SF-12 in describing health status in RA.......OBJECTIVE: The Health Assessment Questionnaire Disability Index (HAQ) is a widely used outcome measure in rheumatoid arthritis (RA), whereas the SF-12v2 Health Survey (SF-12) was introduced recently. We investigated how the HAQ and SF-12 were associated with socio-demographic, lifestyle......, and disease- and treatment-related factors in patients with RA. METHODS: In RA patients from 11 Danish centers, clinical and patient-reported data, including the HAQ and SF-12, were collected. Three multiple linear regression models were estimated, with the HAQ, SF-12 physical component score (PCS), and SF-12...

  7. Geochemical factors influencing vault design and layout

    International Nuclear Information System (INIS)

    Gascoyne, M.; Stroes-Gascoyne, S.; Sargent, F.P.

    1995-01-01

    The design and construction of a vault for used nuclear fuel in crystalline rock may be influenced by a number of geochemical factors. During the siting stage, information is needed regarding the rock type, heterogeneities in its composition and the mineralogy of permeable zones because these will cause variations in thermal conductivity, strength and radionuclide sorptive properties of the rock. These factors may affect decisions regarding depth of vault construction, tunnel dimensions and spacing of panels and waste containers. The decision on whether groundwaters are allowed to flow freely into a planned excavation may depend on measurements of their chemical compositions, microbiological contents and presence of hazardous or corrosive constituents. During site characterization, borehole drilling from the surface and subsequent hydraulic testing will introduce both chemical and microbiological contaminants that may further influence this decision. During vault construction, the geochemistry of the rock may cause changes to the characterization, design and construction of the vault. For example, high salinity fluids in micropores in the rock could prevent the use of radar surveys to detect fractures in the surrounding rock. High rock salinity may also cause unacceptably high total dissolved solids loadings in water discharged from the facility. Again, the presence of toxic, corrosive or radioactive constituents in inflowing groundwater may require grouting or, if inflow is needed for service operations, development of treatment facilities both above and below ground. In addition, the use of explosives will cause high organic and nitrate loadings in service water as well as the possible impregnation of these chemicals in the damaged wall-rock surrounding an excavation. These chemicals may remain despite cleaning efforts and act as nutrients to promote microbial activity in the post-closure phase. In the operational phase, further design and construction, changes

  8. Factors influencing performance within startup assistance organizations

    Directory of Open Access Journals (Sweden)

    Ceaușu Ioana

    2017-07-01

    Full Text Available Startup assistance organizations, and especially business accelerators have gained a lot of traction in the last years, captioning not only the attention of the public, but most importantly that of investors and other stakeholders. It has become a challenge for many all around the world to develop such programs, but many have failed or did not have their expected results, meaning medium to long-term sustainable and profitable alumni start-ups. As high amounts of resources, both human and financial, are being invested in the design and development of such programs, it is important to understand what sets apart the successful business acceleration programs from the ones that fail. The current paper is reviewing the up-to-date theoretical literature and studies on the matter at hand, in order to identify the most relevant factors influencing startup assistance organizations’ performance. The objective behind identifying these factors is to get a better understanding of best practices of such successful programs and set the basis for future research regarding the development of a set of metrics for more accurately measuring their performance.

  9. ON THE MEASUREMENT OF THE 13C(α, n)16O S-FACTOR AT NEGATIVE ENERGIES AND ITS INFLUENCE ON THE s-PROCESS

    International Nuclear Information System (INIS)

    La Cognata, M.; Spitaleri, C.; Trippella, O.; Kiss, G. G.; Guardo, G. L.; Puglia, S. M. R.; Romano, S.; Spartà, R.; Rogachev, G. V.; Avila, M.; Koshchiy, E.; Kuchera, A.; Santiago, D.; Mukhamedzhanov, A. M.; Lamia, L.

    2013-01-01

    The 13 C(α, n) 16 O reaction is the neutron source for the main component of the s-process, responsible for the production of most of the nuclei in the mass range 90 ∼ 8 K, corresponding to an energy interval where the 13 C(α, n) 16 O reaction is effective in the range of 140-230 keV. In this regime, the astrophysical S(E)-factor is dominated by the –3 keV sub-threshold resonance due to the 6.356 MeV level in 17 O, giving rise to a steep increase in the S-factor. Its contribution is still controversial as extrapolations, e.g., through the R-matrix and indirect techniques such as the asymptotic normalization coefficient (ANC), yield inconsistent results. The discrepancy amounts to a factor of three or more precisely at astrophysical energies. To provide a more accurate S-factor at these energies, we have applied the Trojan horse method (THM) to the 13 C( 6 Li, n 16 O)d quasi-free reaction. The ANC for the 6.356 MeV level has been deduced through the THM as well as the n-partial width, allowing us to attain unprecedented accuracy for the 13 C(α, n) 16 O astrophysical factor. A larger ANC for the 6.356 MeV level is measured with respect to the ones in the literature, (C-tilde α 13 C 17O(1/2+)2 = 7.7 ± 0.3 stat -1.5 +1. |6 norm fm –1 , yet in agreement with the preliminary result given in our preceding letter, indicating an increase of the 13 C(α, n) 16 O reaction rate below about 8 × 10 7 K if compared with the recommended values. At ∼10 8 K, our reaction rate agrees with most of the results in the literature and the accuracy is greatly enhanced thanks to this innovative approach

  10. Preoperative factors influencing success in pterygium surgery.

    Science.gov (United States)

    Torres-Gimeno, Ana; Martínez-Costa, Lucía; Ayala, Guillermo

    2012-08-08

    To identify preoperative, perioperative and postoperative risk factors that influence the success of pterygium surgery. This is a prospective study of thirty-six patients with primary or recurrent pterygia. A detailed anamnesis and an ophthalmological examination were performed looking for the following factors: age, race, latitude and altitude of the main place of residence, hours of exposure to the sun, use of protective measures against UV-radiation, classification of pterygium, width of the pterygium at limbus, surgical technique (conjunctival autograft plus suturing versus tissue glue), graft alterations (misapposition, granuloma, haemorrhage, oedema, retraction or necrosis), and postoperative symptoms (foreign-body sensation, pain). The examinations were performed 2 and 7 days and 2, 6 and 12 months after surgery. In addition, recurrence was defined as any growth of conjunctiva into the cornea. A logistic regression and a survival analysis have been used to perform data analysis. A total number of 36 patients completed a one year follow-up. A total of 13 patients were born and lived in Spain, and 26 came from other countries, mostly Latin America. A total number of 8 males (no women) presented a recurrence, mainly between 2 and 6 months. The hours of sun exposure through their life was independently related to surgical success. Pterygia of less than 5 mm of base width showed a weak positive correlation with recurrence. None of the other factors considered were significantly related to recurrence. Male gender and high sun exposure are strongly and independently related to surgical success after the removal of pterygia.

  11. Preoperative factors influencing success in pterygium surgery

    Directory of Open Access Journals (Sweden)

    Torres-Gimeno Ana

    2012-08-01

    Full Text Available Abstract Background To identify preoperative, perioperative and postoperative risk factors that influence the success of pterygium surgery. Methods This is a prospective study of thirty-six patients with primary or recurrent pterygia. A detailed anamnesis and an ophthalmological examination were performed looking for the following factors: age, race, latitude and altitude of the main place of residence, hours of exposure to the sun, use of protective measures against UV-radiation, classification of pterygium, width of the pterygium at limbus, surgical technique (conjunctival autograft plus suturing versus tissue glue, graft alterations (misapposition, granuloma, haemorrhage, oedema, retraction or necrosis, and postoperative symptoms (foreign-body sensation, pain. The examinations were performed 2 and 7 days and 2, 6 and 12 months after surgery. In addition, recurrence was defined as any growth of conjunctiva into the cornea. Results A logistic regression and a survival analysis have been used to perform data analysis. A total number of 36 patients completed a one year follow-up. A total of 13 patients were born and lived in Spain, and 26 came from other countries, mostly Latin America. A total number of 8 males (no women presented a recurrence, mainly between 2 and 6 months. The hours of sun exposure through their life was independently related to surgical success. Pterygia of less than 5 mm of base width showed a weak positive correlation with recurrence. None of the other factors considered were significantly related to recurrence. Conclusions Male gender and high sun exposure are strongly and independently related to surgical success after the removal of pterygia.

  12. Factors influencing job satisfaction and organizational commitment.

    Science.gov (United States)

    Watson, Liana M

    2008-01-01

    To assess the relationship between intrinsic and extrinsic motivational factors influencing job satisfaction and the perspective of frontline medical imaging staff in acute care health care facilities in the United States. The sample consisted of 359 registered radiologic technologists who were working as staff technologists in acute care health care facilities in the United States. The results of the study suggest that satisfaction with intrinsic and extrinsic motivators influences overall satisfaction with the work environment and job and commitment to the employer.

  13. Overview of factors influencing the secondary market

    International Nuclear Information System (INIS)

    Bleistine, P.A.

    1982-01-01

    The major factor influencing secondary trading for the last few years has been the large contractural commitments built up by consumers for reactor programs which have proven to be unrealistic. The situation has intensified as a result of utilities needing to generate capital through inventory liquidation or reductions. The flexibilities in most contracts are inadequate to match the types of external and/or internal factors faced by the industry. This situation also suggests the need for secondary markets to help the industry adjust to unforeseen difficulties. They are very active markets at this time, but their influence in relation to the long-term method of doing business should not be exaggerated

  14. INFLUENCE FACTORS FOR LEASING MARKET CONTRACTS

    Directory of Open Access Journals (Sweden)

    Oana BĂRBULESCU

    2016-11-01

    Full Text Available This paper aims to investigate the relationship between leasing contracts and some factors that influence the value of these contracts. In order to do this, we have decided on some quantitative marketing research by appealing to statistics for accomplishing the objectives that we have set: to find a correlation between the turnover percentage assigned to leasing expenses and several influence factors. This study indicated that the more contracts are signed by a firm, the more likely is to assign a bigger fraction of the income to each new leasing contract. The study confirmed that bigger companies are relying more on leasing as a way of financing than small companies. This study also discovered that companies with more employees are using larger contracts in order to sustain their activity. The findings are expected to contribute to adjusting the offers by the leasing companies, taking into consideration these factors and to using these factors in order to better predict the market evolution.

  15. Factors Influencing Medical Students' Choice of Specialty

    OpenAIRE

    Chang, Pei-Yeh; Hung, Chih-Young; Wang, Kuei-lng; Huang, Yuan-Huei; Chang, King-Jen

    2006-01-01

    Medical school graduates are the source of a country's physicians. Determining how the graduates of these schools select their areas of specialization is the key to achieving a balanced distribution of doctors among all specialties. The purposes of this study were to determine the factors that influence medical students' choice of medical specialty, and to derive the relative weight of each factor. Methods: We constructed a two-tiered analytic hierarchy process (AHP) model which was repres...

  16. A factor analysis to detect factors influencing building national brand

    Directory of Open Access Journals (Sweden)

    Naser Azad

    Full Text Available Developing a national brand is one of the most important issues for development of a brand. In this study, we present factor analysis to detect the most important factors in building a national brand. The proposed study uses factor analysis to extract the most influencing factors and the sample size has been chosen from two major auto makers in Iran called Iran Khodro and Saipa. The questionnaire was designed in Likert scale and distributed among 235 experts. Cronbach alpha is calculated as 84%, which is well above the minimum desirable limit of 0.70. The implementation of factor analysis provides six factors including “cultural image of customers”, “exciting characteristics”, “competitive pricing strategies”, “perception image” and “previous perceptions”.

  17. Factors Influencing Donor Partnership Effectiveness | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2010-11-03

    Nov 3, 2010 ... A two-dimensional tool probing eight factors that influence partnership performance was developed, and used in conjunction with a Partnering Process Model, to guide the preparation of the case studies. The incorporation of the temporality dimension is quite novel and adds to the understanding and ...

  18. Factors influencing woodlands of southwestern North Dakota

    Science.gov (United States)

    Michele M. Girard; Harold Goetz; Ardell J. Bjugstad

    1987-01-01

    Literature pertaining to woodlands of southwestern North Dakota is reviewed. Woodland species composition and distribution, and factors influencing woodland ecosystems such as climate, logging, fire, and grazing are described. Potential management and improvement techniques using vegetation and livestock manipulation have been suggested.

  19. Factors influencing HIV seroprevalence rate among pregnant ...

    African Journals Online (AJOL)

    Human immune deficiency virus (HIV) seroprevalence among pregnant women in Calabar was studied. The aims were to establish HIV seroprevalence rate and to identify factors which influence this rate in our pregnant women. HIV seroprevalence rate of 2.7% among antenatal women in Calabar was recorded with a ...

  20. Factors influencing insulin secretion from encapsulated islets

    NARCIS (Netherlands)

    de Haan, BJ; Faas, MM; de Vos, P

    2003-01-01

    Adequate regulation of glucose levels by a microencapsulated pancreatic islet graft requires a minute-to-minute regulation of blood glucose. To design such a transplant, it is mandatory to have sufficient insight in factors influencing the kinetics of insulin secretion by encapsulated islets. The

  1. Socio-Economic Factors Influencing Entrepreneurship Among ...

    African Journals Online (AJOL)

    Socio-Economic Factors Influencing Entrepreneurship Among Women In Fishing Communities In Ondo State, Nigeria. ... The study found that overall entrepreneurial rating of the study group is low, essential input can not be easily gotten in the area, the respondents has large household size thereby had a large dependents ...

  2. Factors Influencing Information and Communication Technology ...

    African Journals Online (AJOL)

    Information and communication technology (ICT) is a veritable tool for sustainable agricultural development in Nigeria. This paper analyzed the factors that influenced ICT use by women research scientists in the Universities of Agriculture in Nigeria. Simple random sampling technique was used to select 40 respondents per ...

  3. Factors Influencing Examination Malpractice in Secondary Schools ...

    African Journals Online (AJOL)

    The main purpose of this study was to investigate factors influencing examination malpractice in some selected secondary schools in Cross River State, Nigeria. A sample of one thousand two hundred (1200) students were selected across the three educational zones of Ogoja, Ikom and Calabar using stratified, random ...

  4. Factors influencing laser cutting of wood

    Science.gov (United States)

    V.G. Barnekov; C.W. McMillin; H.A. Huber

    1986-01-01

    Factors influencing the ability of lasers to cut wood may be generally classified into these three areas: 1) characteristics of the laser beam; 2) equipment and processing variables; and 3) properties of the workpiece. Effects of beam power, mode, polarization, and stability are discussed as are aspects of optics, location of focal point, feed speed, gas-jet assist...

  5. Factors that influence advertising design ideation | Usman ...

    African Journals Online (AJOL)

    Factors that influence advertising design ideation. ... PROMOTING ACCESS TO AFRICAN RESEARCH ... inevitably, more than ever before, on advertisement to take products to the doorsteps of potential consumers. Consequently, local and global corporations employ all manner of advertising media to achieve their end.

  6. Factors Influencing Smallholder Farmers Participation in IFAD ...

    African Journals Online (AJOL)

    USER

    2015-02-02

    Feb 2, 2015 ... This study assessed Factors Influencing smallholder farmers' ... percent of the population engaged in agricultural activities as a career and ... that the major source of income of the poor is agriculture and ... shown that farmers have different reasons for participation in agricultural ... 30 Dan gamau 534. 30.

  7. Exploring Factors That Influence Quality Literature Circles

    Science.gov (United States)

    Young, Chase; Mohr, Kathleen A. J.

    2018-01-01

    Research indicates that literature circles are an authentic means for literacy development that students typically enjoy. To better understand the potential value and to add to the research base regarding literature circles, this study, involving 17 fourth graders, explores factors that may influence the quality of literature discussions,…

  8. Social Factors Influencing Child Health in Ghana.

    Directory of Open Access Journals (Sweden)

    Emmanuel Quansah

    Full Text Available Social factors have profound effects on health. Children are especially vulnerable to social influences, particularly in their early years. Adverse social exposures in childhood can lead to chronic disorders later in life. Here, we sought to identify and evaluate the impact of social factors on child health in Ghana. As Ghana is unlikely to achieve the Millennium Development Goals' target of reducing child mortality by two-thirds between 1990 and 2015, we deemed it necessary to identify social determinants that might have contributed to the non-realisation of this goal.ScienceDirect, PubMed, MEDLINE via EBSCO and Google Scholar were searched for published articles reporting on the influence of social factors on child health in Ghana. After screening the 98 articles identified, 34 of them that met our inclusion criteria were selected for qualitative review.Major social factors influencing child health in the country include maternal education, rural-urban disparities (place of residence, family income (wealth/poverty and high dependency (multiparousity. These factors are associated with child mortality, nutritional status of children, completion of immunisation programmes, health-seeking behaviour and hygiene practices.Several social factors influence child health outcomes in Ghana. Developing more effective responses to these social determinants would require sustainable efforts from all stakeholders including the Government, healthcare providers and families. We recommend the development of interventions that would support families through direct social support initiatives aimed at alleviating poverty and inequality, and indirect approaches targeted at eliminating the dependence of poor health outcomes on social factors. Importantly, the expansion of quality free education interventions to improve would-be-mother's health knowledge is emphasised.

  9. Factors that influence women's dispositions toward science

    Science.gov (United States)

    Atria, Catherine Graczyk

    Females have been underrepresented in the study of science and science careers for decades although advancements have been made in closing this gender gap, the gap persists particularly in the physical sciences. Variables which influence a woman's desire to pursue and maintain a science course of study and career must be discovered. The United States lags behind other industrialized countries in the fields of science, math, and engineering. Females comprise an estimated half of the population; their potential contributions cannot be ignored or overlooked. This retrospective research study explores the personal experiences of ten women enrolled in science majors, with science related career plans. The goal of this study is to describe the factors that influence the participants' interest in science. The findings, the effect of science coursework, science teachers' personality and manner, other influential educational personnel, role models and mentors, external influences exclusive of school, parental influence, locus of control and positive attitudes toward science confirm what other researchers have found.

  10. Theoretical difference between impact factor and influence factor

    Directory of Open Access Journals (Sweden)

    Đilda Pečarić

    2010-06-01

    Full Text Available Bibliometric constructions of "knowledge maps" and "cognitive structures of science" do not differentiate between impact and influence factors. The difference can be constructedaccording to different meaning and interpretation of the terms reference and citation. Reference is "acknowledgment which one author gives to another", whereas citation is "acknowledgment which one document receives from another". Development of Information Science according to period and subject area is analyzed on the corpus of citation literature retrieved from doctoral dissertations in Information Science from 1978 to 2007 at Croatian universities. The research aim is to indicate the difference between document impact factor and author's influence factor (i.e. reference ability to produce effects on actions, behavior, and opinions of authors of doctoral theses. The influence factor serves to distinguish the key role of cited authors in time and according to the duration of the influence (the average age for cited papers of dominant authors in different periods is between eight and ten years. The difference between linear and interactive communication seems vital for the interpretation of cited half-life, i.e. the attitude of one science community towards used information resources and cognitive heritage. The analyzed corpus of 22,210 citations can be divided into three communication phases according to influence factor criteria: in the phase of dialogue and interactive communication 25% of bibliographic units are cited in the first four years; in the second phase another 25% of units are cited from the fifth to the ninth year; after ten years, in the dominant linear communication phase, approximately 30% of units are cited.

  11. Risks factoring business: accounting measurement

    Directory of Open Access Journals (Sweden)

    Z.V. Gutsaylyuk

    2015-06-01

    Full Text Available The paper carried out the identification of risk factors for the development of possible accounting software management. Studied theoretical and methodological aspects of the risk classification of factoring operations in the part of the risk assessment factors. It is proposed to consider the risks factors as the risk that is acceptable controlled by accounting instruments and the risks that can not be taken into account in the accounting records. To minimize the risk factor, accounting-driven tools, a method of self-insurance, which is a factor in the creation of provision for factoring transactions designed to cover unexpected expenses and losses. Provision for factoring factor will establish more stable conditions of financial activity and avoid the fluctuations of profit factor in relation to the writing off of losses on factoring operatsіyam.Developed proposals allow for further research to improve the organizational and methodological basis of accounting and analysis of information as a basis for providing risk management factor, particularly in terms of improving the evaluation questions such risks and their qualitative and quantitative analysis.

  12. Investigating important factors influencing purchasing from chains

    Directory of Open Access Journals (Sweden)

    Naser Azad

    2012-04-01

    Full Text Available In this paper, we survey important factors, influencing customers to buy more from one of well known food market operating in capital city of Iran named Shahrvand. The survey studies the effects of six factors including customer's perception, persuasive factors, brand, customers' expectations, product's characteristics and special features of store on attracting more customers. We have distributed questionnaire among 196 customers who regularly visit stores and analyzed details of the data. The results indicate that customers' perception is the most important item, which includes eight components. Years of experience is the most important item in our survey followed by impact of color and working hours. Diversity of services is another factor, which plays the most important role followed by quality of services. Next, fidelity and brand are other most important factors and the name of store and risk are in lower degree of importance.

  13. What Factors Influence Knowledge Sharing in Organizations?

    DEFF Research Database (Denmark)

    Razmerita, Liana; Kirchner, Kathrin; Nielsen, Pia

    2016-01-01

    factors drive employees’ participation and what factors hamper their participation in enterprise social media. Design/methodology/approach: Based on a literature review, a unified research model is derived integrating demographic, individual, organizational and technological factors that influence......Purpose: Enterprise social media platforms provide new ways of sharing knowledge and communicating within organizations to benefit from the social capital and valuable knowledge that employees have. Drawing on social dilemma and self-determination theory, the aim of the study is to understand what...... knowledge sharing framework helps to understand what factors impact engagement on social media. Furthermore the article suggests different types of interventions to overcome the social dilemma of knowledge sharing. Originality/value: The study contributes to an understanding of factors leading...

  14. Factors Influencing Colorectal Cancer Screening Participation

    Directory of Open Access Journals (Sweden)

    Antonio Z. Gimeno García

    2012-01-01

    Full Text Available Colorectal cancer (CRC is a major health problem worldwide. Although population-based CRC screening is strongly recommended in average-risk population, compliance rates are still far from the desirable rates. High levels of screening uptake are necessary for the success of any screening program. Therefore, the investigation of factors influencing participation is crucial prior to design and launches a population-based organized screening campaign. Several studies have identified screening behaviour factors related to potential participants, providers, or health care system. These influencing factors can also be classified in non-modifiable (i.e., demographic factors, education, health insurance, or income and modifiable factors (i.e., knowledge about CRC and screening, patient and provider attitudes or structural barriers for screening. Modifiable determinants are of great interest as they are plausible targets for interventions. Interventions at different levels (patient, providers or health care system have been tested across the studies with different results. This paper analyzes factors related to CRC screening behaviour and potential interventions designed to improve screening uptake.

  15. Formulation of the fundamental basis for the evaluation of the comparability of different measuring method for the determination of ground air radon concentration. Vol. 2. Report on ground air radon measurements - influence factors, measuring methods, evaluation; Erarbeitung fachlicher Grundlagen zur Beurteilung der Vergleichbarkeit unterschiedlicher Messmethoden zur Bestimmung der Radonbodenluftkonzentration. Bd. 2. Sachstandsbericht ''Radonmessungen in der Bodenluft - Einflussfaktoren, Messverfahren, Bewertung''

    Energy Technology Data Exchange (ETDEWEB)

    Kemski, J.; Klingel, R.; Siehl, A.; Neznal, M.; Matolin, M.

    2012-03-15

    The report on ground air radon measurements covers the following issues: Introduction; Radon in the geogenic underground: emanation, migration, exhalation; Influencing factors: geochemical parameters, structural situation, geomorphology, exogenic effects; Ground air measurements: site exploration, tectonics, earth quake prognosis, radon in ground air and buildings; Radon measurement: sampling and measuring methods, error consideration, comparative measurements, practical examples; measuring regulations and recommendations; Variability of the radon concentration: temporal variation, sampling depth, spatial variations; Evaluation and conclusions.

  16. Factors influencing electric utility expansion. Volume II

    Energy Technology Data Exchange (ETDEWEB)

    Masud, E. [ed.

    1977-01-01

    This report, Vol. 2, submitted by the General Electric Co., identifies factors that should be considered in planning interconnected systems and discusses how these factors relate to one another. The objective is to identify all the factors and classify them by their use and importance in arriving at a decision. Chapter 2 discusses the utility system and its system behavior characteristics, emphasizing behavior that affects the planning of the bulk-power generation and transmission system. Chapter 3 introduces interconnection planning by discussing the new system characteristics brought to operation and planning. Forty-two factors associated with cost, reliability, constraints, and coordination are related to each other by factor trees. Factor trees display the relationship of one factor such as reliability to more-detailed factors which in turn are further related to individual characteristics of facilities. These factor trees provide a structure to the presentation. A questionnaire including the 42 factors was completed by 52 system planners from utility companies and government authorities. The results of these questionnaires are tabulated and presented with pertinent discussion of each factor. Chapter 4 deals with generation planning, recognizing the existence of interconnections. Chapter 5 addresses transmission planning, questions related to reliability and cost measures and constraints, and factors related to both analytical techniques and planning procedures. The chapter ends with a discussion of combined generation-transmission planning. (MCW)

  17. Factors influencing energy efficiency investments in existing Swedish residential buildings

    Energy Technology Data Exchange (ETDEWEB)

    Nair, Gireesh; Gustavsson, Leif; Mahapatra, Krushna [Ecotechnology, Mid Sweden University, SE-83125 Oestersund (Sweden)

    2010-06-15

    We used the data from a survey conducted in 2008 of 3,000 owners of detached houses to analyse the factors that influence the adoption of investment measures to improve the energy efficiency of their buildings. For the majority of Swedish homeowners, it was important to reduce their household energy use, and most of them undertook no-cost measures as compared to investment measures. Personal attributes such as income, education, age and contextual factors, including age of the house, thermal discomfort, past investment, and perceived energy cost, influence homeowners' preference for a particular type of energy efficiency measure. The implications for promoting the implementation of energy efficiency investment measures are discussed. (author)

  18. Factors Influencing Tacit Knowledge in Construction

    Directory of Open Access Journals (Sweden)

    Jawahar Nesan

    2012-11-01

    Full Text Available Increased complexity of the construction business and consequentuse of new management concepts and technologies ledconstruction organisations to focus more on the transfer of explicitknowledge. However, it is the tacit knowledge that determinesthe construction companies’ competitiveness in a business thatis driven by turbulent market conditions and customers’ everincreasingdemands. This paper highlights the importance of tacitknowledge sharing in construction, explores the challenges andopportunities to efficiently share tacit knowledge, and based on theliterature review identifies some critical factors that influence tacitknowledge in construction. It is argued that employees’ knowledgesharing (learning behaviours are influenced by work practices thatare borne by respective organisational behaviours. Organisational,cultural, and project characteristics that facilitate knowledgesharing among construction employees are explored and thepractices that influence the construction employee behaviour insharing tacit knowledge are highlighted.

  19. Investigating different factors influencing on brand equity

    Directory of Open Access Journals (Sweden)

    Afsane Zamanimoghadam

    2014-07-01

    Full Text Available The purpose of this paper is to determine and prioritize factors influencing on brand equity in consumer’s point of view for a case study of Samsung appliance consumers in city of Tehran, Iran. The study investigates the effects of four factors in terms of the customer's perspective, price, advertisement, family and brand image, by dimensions of brand equity, perceived quality, brand awareness, brand association, brand loyalty, on brand equity. The research method is based on a descriptive-survey research. The questionnaire includes Samsung consumers in city of Tehran, Iran. To test the hypotheses, SPSS and LISREL software packages are used. For data analysis, descriptive statistics and inferential statistical tests including structural equation modeling and path analysis are used. The results of the survey have indicated that family and brand image influence positively on brand equity but the effects of advertisement and price on brand equity were not confirmed.

  20. Environmental factors influencing the conduct disorder and its intervention measures%影响品行障碍的环境因素及干预措施

    Institute of Scientific and Technical Information of China (English)

    徐荣静

    2011-01-01

    阐述了品行障碍的基本概念,对导致品行障碍的环境因素包括家庭因素、学校因素及社会因素进行了分析,对当前比较有效的家庭干预、预防性干预及认知行为干预进行了归纳与总结.%It expounded the basic concept of conduct disorder. It analyzed environmental factors that induced conduct disorders including family factors, school factors and social factors. And it sumed up current effective family intervention, prophylactic intervention, and cognitive behavior interventions.

  1. FACTORS INFLUENCING THE MANAGEMENT OF ADHD

    OpenAIRE

    S ARMAN; M SOLTANI

    2003-01-01

    Introduction: Attention deficit hyperactivity disorder (ADHD)is the most common psychiatric disorder among school age children. It consists of hyperactivity, inattention and impulsive behavior. The onset of the disorder is before the age of 7 years and it happens at least in two situations. It causes significant impairment in social and academic functioning. A determination of factors that influences the therapeutic response in ADHD is the aim of this study. Methods: This study is design...

  2. Factors influencing laser cutting of wood

    Energy Technology Data Exchange (ETDEWEB)

    Barnekov, V. G.; McMillin, C. W.; Huber, H. A.

    1986-07-01

    Factors influencing the ability of lasers to cut wood may be generally classified into these three areas: 1) characteristics of the laser beam; 2) equipment and processing variables; and 3) properties of the work piece. Effects of beam power, mode, polarization, and stability are discussed as are aspects of optics, location of focal point, feed speed, gas-jet assist system and work piece thickness, density, and moisture content. (author)

  3. Psychological Factors Influencing Life Satisfaction of Undergraduates

    OpenAIRE

    Ajayi, Olubukola; Adewumi, Bukunmi

    2017-01-01

    This study was designed to assess the psychological factors influencing life satisfaction of undergraduates. The instruments used were Perceived Stress Scale (PSS), Wong and Law Emotional Intelligence Scale (WLEIS), Rosenberge Self-esteem Scale (RSS), and Satisfaction with Life Scale (SWLS). A total number of 190 participants were purposively selected across various faculties in Ekiti State University. Four hypotheses were tested using Independent t-test to find the effects of perceived stres...

  4. Abiotic factors influencing tropical dry forests regeneration

    Directory of Open Access Journals (Sweden)

    Ceccon Eliane

    2006-01-01

    Full Text Available Tropical dry forests represent nearly half the tropical forests in the world and are the ecosystems registering the greatest deterioration from the anthropogenic exploitation of the land. This paper presents a review on the dynamics of tropical dry forests regeneration and the main abiotic factors influencing this regeneration, such as seasonal nature, soil fertility and humidity, and natural and anthropic disturbances. The main purpose is to clearly understand an important part of TDF succession dynamics.

  5. Factors Influencing Environmental Management Practices Among Hotels in Malaysia

    OpenAIRE

    Zaiton Samdin; Kasimu Abdu Bakori; Hamimah Hassan

    2012-01-01

    This paper attempts to investigate the factors that influence hotel managers- attitudes towards sustainable tourism practices (STP) in Kuala Lumpur and the state of Selangor in Malaysia. The study distributes 104 questionnaires to hotels ranging from one star to five-star categories including budget hotels. Out of this figure, 60 copies of the questionnaires were returned and analyzed. The finding revealed that of all the seven factors investigated, only the variables measuring incentives and...

  6. Measurement of factors that negatively influence the outcome of quitting smoking among patients with COPD: psychometric analyses of the Try To Quit Smoking instrument.

    Science.gov (United States)

    Lundh, Lena; Alinaghizadeh, Hassan; Törnkvist, Lena; Gilljam, Hans; Galanti, Maria Rosaria

    2014-12-01

    To test internal consistency and factor structure of a brief instrument called Trying to Quit smoking. The most effective treatment for patients with chronic obstructive pulmonary disease is to quit smoking. Constant thoughts about quitting and repeated quit attempts can generate destructive feelings and make it more difficult to quit. Development and psychometric testing of the Trying to Quit smoking scale. The Trying to Quit smoking, an instrument designed to assess pressure-filled states of mind and corresponding pressure-relief strategies, was tested among 63 Swedish patients with chronic obstructive pulmonary disease. Among these, the psychometric properties of the instrument were analysed by Exploratory Factor Analyses. Fourteen items were included in the factor analyses, loading on three factors labelled: (1) development of pressure-filled mental states; (2) use of destructive pressure-relief strategies; and (3) ambivalent thoughts when trying to quit smoking. These three factors accounted for more than 80% of the variance, performed well on the Kaiser-Meyer-Olkin (KMO) test and had high internal consistency.

  7. An empirical survey on factors influencing on packaging dairy products

    Directory of Open Access Journals (Sweden)

    Naser Azad

    2013-07-01

    Full Text Available Packaging plays an essential role on supplying different materials such as dairy products. The first thing people may look into when they purchase dairy products such as milk, cheese, etc. is associated with the packaging characteristics. This paper attempts to find important factors influencing on packaging dairy products. The study uses factor analysis to detect important factors based on a questionnaire consists of 28 questions in Likert scale, which is distributed among 200 regular employees of Pegah dairy producer. Cronbach alpha, Kaiser-Meyer-Olkin Measure of Sampling adequacy and Bartlett's test of Sphericity approximation Chi-Square are 0.81, 0.679 and 844.475, respectively and they are within acceptable limit. The study has determined five factors including infrastructure, awareness, design and communication as important factors influencing consumers.

  8. [Factors influencing nurses' organizational citizenship behavior].

    Science.gov (United States)

    Park, Junhee; Yun, Eunkyung; Han, Sangsook

    2009-08-01

    This study was conducted to identify the factors that influence nurses' organizational citizenship behavior. A cross-sectional design was used, with a convenience sample of 547 nurses from four university hospitals in Seoul and Gyeonggi province. The data were collected through a questionnaire survey done from September 22 to October 10, 2008. The tools used for this study were scales on organizational citizenship behavior (14 items), self-leadership (14 items), empowerment (10 items), organizational commitment (7 items), job satisfaction (8 items) and transformational.transactional leadership (14 items). Cronbach's alpha and factor analysis were examined to test reliability and construct validity of the scale. The data collected were processed using SPSS Window 15.0 Program for actual numbers and percentages, differences in the dependent variable according to general characteristics, and means, standard deviations, correlation coefficients and multiple regression analysis. The factors influencing nurses' organizational citizenship behavior were identified as self-leadership(beta=.247), empowerment (beta=.233), job satisfaction (beta=.209), organizational commitment (beta=.158), and transactional leadership (beta=.142). Five factors explained 42.0% of nurses' organizational citizenship behavior. The results of this study can be used to develop further management strategies for enhancement of nurses' organizational citizenship behavior.

  9. Is Subjective Status Influenced by Psychosocial Factors?

    OpenAIRE

    Lundberg, Johanna; Kristenson, Margareta

    2008-01-01

    Objective Associations between subjective status and health are still relatively unexplored. This study aimed at testing whether subjective status is uniquely confounded by psychosocial factors compared to objective status, and what factors that may predict subjective status. Design A cross-sectional analysis of a population-based, random sample of 795 middle-aged men and women from the southeast of Sweden. Questionnaires included subjective status, objective measures of socioeconomic status,...

  10. Internal factors influencing the knowledge continuity ensuring

    Directory of Open Access Journals (Sweden)

    Hana Urbancová

    2012-01-01

    Full Text Available The aim of the systematic ensuring of knowledge continuity is the continuity of an organisation’s development, the quality of managerial positions and the continuity of decision-making. By ensuring knowledge continuity, organisations may gain a performance-enhancing factor. The objective of the article is to identify the level of impact of decisive internal factors determining knowledge continuity ensuring and contributing to the efficiency of the organisations. Knowledge continuity ensuring as an internal force, however, can together with the right employees, help adapt more quickly to external conditions that organisations can hardly control. Monitoring and ensuring knowledge continuity can contribute to a higher quality of processes in general, in particular processes exploiting knowledge, and thus help improve the level of management. The first part of the article presents theoretical views on the aspects of knowledge continuity ensuring in organisations while the second part analyses the findings of the surveys carried out among managers in organisations in the Czech Republic. Based on the summary of the outcomes obtained it is possible to say that internal factors influence knowledge continuity ensuring in organisations, however, the level of impact of individual factors is determined by their size. The findings regarding the impact of each of the factors show that the most significant barriers to knowledge continuity ensuring are those associated with the human factor.

  11. Factors that influence peripheral nerve regeneration

    DEFF Research Database (Denmark)

    Krarup, Christian; Archibald, Simon J; Madison, Roger D

    2002-01-01

    median nerve lesions (n = 46) in nonhuman primates over 3 to 4 years, a time span comparable with such lesions in humans. Nerve gap distances of 5, 20, or 50mm were repaired with nerve grafts or collagen-based nerve guide tubes, and three electrophysiological outcome measures were followed: (1) compound...... muscle action potentials in the abductor pollicis brevis muscle, (2) the number and size of motor units in reinnervated muscle, and (3) compound sensory action potentials from digital nerve. A statistical model was used to assess the influence of three variables (repair type, nerve gap distance, and time...... to earliest muscle reinnervation) on the final recovery of the outcome measures. Nerve gap distance and the repair type, individually and concertedly, strongly influenced the time to earliest muscle reinnervation, and only time to reinnervation was significant when all three variables were included as outcome...

  12. Factors influencing internal color of cooked meats.

    Science.gov (United States)

    Suman, Surendranath P; Nair, Mahesh N; Joseph, Poulson; Hunt, Melvin C

    2016-10-01

    This manuscript overviews the pertinent research on internal color of uncured cooked meats, biochemical processes involved in meat cookery, and fundamental mechanisms governing myoglobin thermal stability. Heat-induced denaturation of myoglobin, responsible for the characteristic dull-brown color of cooked meats, is influenced by a multitude of endogenous (i.e., pH, muscle source, species, redox state) and exogenous (i.e., packaging, ingredients, storage) factors. The interactions between these factors critically influence the internal cooked color and can confuse the consumers, who often perceive cooked color to be a reliable indicator for doneness and safety. While certain phenomena in cooked meat color are cosmetic in nature, others can mislead consumers and result in foodborne illnesses. Research in meat color suggests that processing technologies and cooking practices in industry as well as households influence the internal cooked color. Additionally, the guidelines of many international public health and regulatory authorities recommend using meat thermometers to determine safe cooking endpoint temperature and to ensure product safety. Copyright © 2016 Elsevier Ltd. All rights reserved.

  13. [New nurse turnover intention and influencing factors].

    Science.gov (United States)

    Han, Sang Sook; Sohn, In Soon; Kim, Nam Eun

    2009-12-01

    The study was done to identify turnover intention in new nurses according to characteristics of the nurses and other factors affecting turnover and to provide data to set up a strategy to reduce the turnover. Data were collected from 1,077 new nurses who had less than 12 months employment experience and worked in one of 188 hospitals. Eight research instruments were used. Data analysis was done using SPSS WIN 15.0 program. Several factors influence new nurse turnover intention. The average score for turnover intention was 2.12. The scores for subscales were self efficacy, 3.76, nursing performance, 3.90, job satisfaction, 2.09, organization commitment, 1.28, stress, 1.32, burnout, 2.82 and nursing organizational culture, 3.29. Turnover intention was related to self efficacy, nursing performance, job satisfaction, organization commitment, stress, burnout, nursing organizational culture, duration of in-class training, duration of on the job training, number of hospital beds, length of employment and duration of employment in current workplace. The predicting factors for turnover intention were burnout, stress, duration of employment in the current workplace, self efficacy and nursing performance. Those factors explained 51.6% of turnover intention. New nurse turnover intention can be reduced by mitigating the factors affecting this intention.

  14. Emergency Department Crowding: Factors Influencing Flow

    OpenAIRE

    Arkun, Alp; Briggs, William M; Patel, Sweha; Datillo, Paris A; Bove, Joseph; Birkhahn, Robert H

    2010-01-01

    Background: The objective of this study was to evaluate those factors, both intrinsic and extrinsic to the emergency department (ED) that influence two specific components of throughput: “door-to-doctor” time and dwell time. Methods: We used a prospective observational study design to determine the variables that played a significant role in determining ED flow. All adult patients seen or waiting to be seen in the ED were observed at 8pm (Monday-Friday) during a three-month period. V...

  15. Factors influencing variation in dentist service rates.

    Science.gov (United States)

    Grembowski, D; Milgrom, P; Fiset, L

    1990-01-01

    In the previous article, we calculated dentist service rates for 200 general dentists based on a homogeneous, well-educated, upper-middle-class population of patients. Wide variations in the rates were detected. In this analysis, factors influencing variation in the rates were identified. Variation in rates for categories of dental services was explained by practice characteristics, patient exposure to fluoridated water supplies, and non-price competition in the dental market. Rates were greatest in large, busy practices in markets with high fees. Older practices consistently had lower rates across services. As a whole, these variables explained between 5 and 30 percent of the variation in the rates.

  16. A survey on factors influencing city branding

    Directory of Open Access Journals (Sweden)

    Seyed Mohsen Mahmoudzadeh

    2014-10-01

    Full Text Available Nowadays, the issue of “globalization” is entering to all areas in the world. In addition to products and companies, cities and countries also have the opportunity to see themselves as important actors in international arena. Places define their positions in different fields like business, leisure and recreation, educational opportunities, living, etc. This paper presents an empirical study to introduce city branding as one of the solutions to join globalization process. The method of this research is based on the “descriptive-analytic” and utilize the available literature and experts’ opinions to prioritize the influencing factors of city branding. We use Delphi consensus methods and technique of analytical hierarchy process to evaluate the factors. Finally, the results of the study indicate that security, transportation and mental creativity are the weakest fields and business and shopping facilities are strong fields of city branding in metropolitan of Tehran.

  17. Organizational factors influencing improvements in safety

    International Nuclear Information System (INIS)

    Marcus, A.; Nichols, M.L.; Olson, J.; Osborn, R.; Thurber, J.

    1992-01-01

    Research reported here seeks to identify the key organizational factors that influence safety-related performance indicators in nuclear power plants over time. It builds upon organizational factors identified in NUREG/CR-5437, and begins to develop a theory of safety-related performance and performance improvement based on economic and behavioral theories of the firm. Central to the theory are concepts of past performance, problem recognition, resource availability, resource allocation, and business strategies that focus attention. Variables which reflect those concepts are combined in statistical models and tested for their ability to explain scrams, safety system actuations, significant events, safety system failures, radiation exposure, and critical hours. Results show the performance indicators differ with respect to the sets of variables which serve as the best predictors of future performance, and past performance is the most consistent predictor of future performance

  18. Factors influencing global antiretroviral procurement prices.

    Science.gov (United States)

    Wirtz, Veronika J; Forsythe, Steven; Valencia-Mendoza, Atanacio; Bautista-Arredondo, Sergio

    2009-11-18

    Antiretroviral medicines (ARVs) are one of the most costly parts of HIV/AIDS treatment. Many countries are struggling to provide universal access to ARVs for all people living with HIV and AIDS. Although substantial price reductions of ARVs have occurred, especially between 2002 and 2008, achieving sustainable access for the next several decades remains a major challenge for most low- and middle-income countries. The objectives of the present study were twofold: first, to analyze global ARV prices between 2005 and 2008 and associated factors, particularly procurement methods and key donor policies on ARV procurement efficiency; second, to discuss the options of procurement processes and policies that should be considered when implementing or reforming access to ARV programs. An ARV-medicines price-analysis was carried out using the Global Price Reporting Mechanism from the World Health Organization. For a selection of 12 ARVs, global median prices and price variation were calculated. Linear regression models for each ARV were used to identify factors that were associated with lower procurement prices. Logistic regression models were used to identify the characteristics of those countries which procure below the highest and lowest direct manufactured costs. Three key factors appear to have an influence on a country's ARV prices: (a) whether the product is generic or not; (b) the socioeconomic status of the country; (c) whether the country is a member of the Clinton HIV/AIDS Initiative. Factors which did not influence procurement below the highest direct manufactured costs were HIV prevalence, procurement volume, whether the country belongs to the least developed countries or a focus country of the United States President's Emergency Plan For AIDS Relief. One of the principal mechanisms that can help to lower prices for ARV over the next several decades is increasing procurement efficiency. Benchmarking prices could be one useful tool to achieve this.

  19. Factors influencing seed germination in Cerrado grasses

    Directory of Open Access Journals (Sweden)

    Rosana Marta Kolb

    2016-03-01

    Full Text Available Few studies address the ecology of herbs of Cerrado grasslands, which are ecosystems where the long dry season, high temperatures, insolation, fire and invasive grasses greatly influencing germination and the establishment of plants. We assessed germination of 13 species of Poaceae from Cerrado grasslands under nursery conditions or in germination chambers, the latter with i recently collected seeds and seeds after six months storage, ii under constant and alternating temperatures, and iii in the presence and absence of light. Germinability, mean germination time (MGT and required light were quantified to elucidate factors involved in successful germination. Germinability was low for most grasses, probably because of low seed viability. For most species, germinability and MGT were not altered by seed storage. Germination percentages were higher at alternating temperatures and in the presence of light, factors that are more similar to natural environmental situations compared with constant temperature or the absence of light. Our findings indicate that alternating temperatures and light incidence are key factors for germination of species of Poaceae. The maintenance of these environmental factors, which are crucial for the conservation of Cerrado grasslands, depends on appropriate management interventions, such as fire management and the control of biological invasion.

  20. Factors that influence nurses' job satisfaction.

    Science.gov (United States)

    Ma, Chen-Chung; Samuels, Michael E; Alexander, Judith W

    2003-05-01

    To examine factors affecting the job satisfaction of registered nurses (RNs). A growing recognition of job dissatisfaction among RNs in South Carolina hospitals has contributed to current problems with recruitment and retention. If administrators identify factors influencing RNs' job satisfaction in hospitals and implement strategies to address these factors, RN turnover rates will decrease and recruiting and retention rates will increase. A cross-sectional study of secondary data was designed to identify the individual, work, and geographic factors that impact nursing job satisfaction at the state level. A 27-question self-administered survey was sent to 17,500 RNs in South Carolina with postage-paid envelopes for their responses. Surveys from 3472 nurses were completed anonymously. Univariate statistics were used to describe the study sample. One-way and multivariable Analysis of Variance were used to determine which variables contributed the most to job satisfaction. For about two thirds of the RNs, job satisfaction remained the same or had lessened over the past 2 years. In addition, statistically significant differences were found between job satisfaction and years of service, job position, hospital retirement plan, and geographic area. The findings have implications for nurse managers and hospital administrators for planning and implementing effective health policies that will meet the unique needs of their staffs and organizations. Such research is particularly relevant in this difficult time of nursing shortages throughout the healthcare industry.

  1. Factors Influencing Acceptance Of Contraceptive Methods

    Directory of Open Access Journals (Sweden)

    Anita Gupta

    1997-04-01

    Full Text Available Research Problem: What are the factors influencing acceptance of contraceptive methods. Objective: To study the determinants influencing contra­ceptive acceptance. Study design: Population based cross - sectional study. Setting: Rural area of East Delhi. Participants: Married women in the reproductive age group. Sample:Stratified sampling technique was used to draw the sample. Sample Size: 328 married women of reproductive age group. Study Variables: Socio-economic status, Type of contraceptive, Family size, Male child. Outcome Variables: Acceptance of contraceptives Statistical Analysis: By proportions. Result: Prevalence of use of contraception at the time of data collection was 40.5%. Tubectomy and vasectomy were most commonly used methods. (59.4%, n - 133. Educational status of the women positively influenced the contraceptive acceptance but income did not. Desire for more children was single most important deterrent for accepting contraception. Recommendations: (i             Traditional method of contraception should be given more attention. (ii            Couplesshould be brought in the contraceptive use net at the early stage of marriage.

  2. Factors influencing tinnitus loudness and annoyance.

    Science.gov (United States)

    Hiller, Wolfgang; Goebel, Gerhard

    2006-12-01

    To evaluate the 2 major components of tinnitus severity, loudness and annoyance, and their degree of dependence on characteristics of tinnitus manifestation, history, and etiology. Cross-sectional survey performed during the first months of 2004. Nonclinical population. A total of 4995 members of the German Tinnitus League. Comprehensive screening questionnaire, including the Klockhoff and Lindblom loudness grading system and the miniversion of the Tinnitus Questionnaire. A moderate correlation of 0.45 was found between tinnitus loudness and annoyance. Both factors were generally higher in men, those older than 50 years, those with binaural and centrally perceived tinnitus, those with increased noise sensitivity, and those who had continuous tinnitus without interruptions. Tinnitus that lasted 12 months or less had a stronger influence on annoyance (odds ratio [OR], 1.96) than on loudness (OR, 0.45), whereas the contrary was found for tinnitus of more than 5 years' duration (ORs, 0.72 and 2.11, respectively). Loudness and annoyance were increased in subjects with coexisting hearing loss, vertigo, and hyperacusis. The impact of hyperacusis on annoyance was clearly stronger than on loudness (ORs, 21.91 vs 9.47). Several clinical factors of tinnitus influence perceived loudness and annoyance. Both are distinguishable components of tinnitus severity.

  3. Factors influencing career decisions in internal medicine.

    Science.gov (United States)

    Macdonald, C; Cawood, T

    2012-08-01

    Numerous factors influence career decisions for internal medicine trainees and Fellows. There is a perception that a greater emphasis is placed on work-family balance by younger physicians. To determine the characteristics of the modern internal medicine workforce and ascertain whether job flexibility is important to career decision-making. We hypothesised that factors which reflect flexibility would be highly influential in decision-making, especially for women and those with young children. A questionnaire was mailed to 250 New Zealand internal medicine trainees and Fellows. It focused on factors, including job flexibility, interest and collegial support, and included demographic details which were primarily aimed at ascertaining family responsibilities. Response rate was 54%. The majority of female physicians are the main person responsible for their children (62%), and the majority of their partners work full-time (80%). This contrasts with male physicians, of whom only 4% are the main person responsible for their children. Flexibility was found to be more influential in women, those with young children, trainees and those working in outpatient-based subspecialties. However, contrary to our original hypothesis, flexibility was not reported to be highly influential in any group, with career choice being most influenced by interest and enjoyment, intellectual challenge and variety within the job. It is hoped that results will inform employers and those involved with training to enable them to better cater for the needs of the workforce and also encourage trainees to consider future family commitments when making career decisions. © 2012 The Authors. Internal Medicine Journal © 2012 Royal Australasian College of Physicians.

  4. FACTORS INFLUENCING FOOD NEOPHOBIA. A BRIEF REVIEW

    Directory of Open Access Journals (Sweden)

    STOICA Maricica

    2016-12-01

    Full Text Available Nowadays, the number of new food products has increased considerably. Nevertheless, not all new food products are accepted and understood by consumers, the innovations in the food sector are often not well received by the market, partly due to a phenomenon known as food neophobia. Food neophobia, a general aversion to try new or unfamiliar foods, has a major impact on preferences, selection and food product acceptability. The neophobic consumers tend to display negative attitudes and less pleasure in relation to new food products. Food neophobia is based on three main reasons for rejection of a food, such as: dislike of its sensory characteristics, fear of negative consequences of eating it, and disgust arising from the idea of the food’s nature or origin. Phobia towards the introduction of unfamiliar foods in the diet can occur for several different factors, such as: socio-demographic characteristics, education level and lifestyle, degree of urbanization, income level, arousal, personal experiences, advertising, fashion, advices of other persons, and habits. This review paper was designed to provide up-to-date relevant information on factors influencing food neophobia, like social factors, type of new food, education, and arousal. The scientific information presented here could help food scientists in new food development, and food companies to develop the best marketing strategies that lead to a general decrease in neophobic consumers’ behaviour. The application of appropriate marketing strategies may allow the product to reach a competitive advantage and be successful.

  5. Evaluation of Factors Influencing Job Satisfaction

    Directory of Open Access Journals (Sweden)

    Barbara A. Sypniewska

    2014-03-01

    Full Text Available The term “job satisfaction” is derived from the humanities, psychology and sociology. In the field of psychology, it is a state where an employee has an emotional perception of his situation and reacts with feelings of pleasure or pain. In sociology, it is considered a variable in different categories related to how each employee evaluates and thinks about his work. Job satisfaction is closely related to the performance and quality of work performed by an employee and, consequently, translates into the success of an organization, because a satisfied employee builds and participates in the success of any organization. This article presents the results of the research conducted by the author in 2012 on a sample of 215 people. Respondents represented different organizations. The aim of the study was to identify and assess the significance of individual factors influencing satisfaction and dissatisfaction with work and demonstrate their impact on the overall assessment of job satisfaction. The study showed that between the weight attributed to individual factors and overall job satisfaction there are many statistically significant correlations referring mainly to selected on the basis of analysis respondents’ groups. The study confirms the raised thesis concerning the validity of research in the factors affecting the general feeling of satisfaction by the employees.

  6. Intrinsic and extrinsic factors influencing large African herbivore movements

    NARCIS (Netherlands)

    Venter, J.A.; Prins, H.H.T.; Mashanova, A.; Boer, de W.F.; Slotow, R.

    2015-01-01

    Understanding environmental as well as anthropogenic factors that influence large herbivore ecological patterns and processes should underpin their conservation and management. We assessed the influence of intrinsic, extrinsic environmental and extrinsic anthropogenic factors on movement behaviour

  7. Habitat factors influencing the distribution of Cymbopogon validus in ...

    African Journals Online (AJOL)

    Habitat factors influencing the distribution of Cymbopogon validus in Mkambati Game Reserve, Transkei. ... disturbance; game reserve; grassland; grasslands; habitat conditions; habitat factors; mkambati game ... AJOL African Journals Online.

  8. Outdoor Advertising and Gender Differences : Factors Influencing Perception and Attitudes

    OpenAIRE

    Belinskaya, Yulia

    2015-01-01

    The thesis examines attitudes towards outdoor advertising, with strong emphasis on gender-based differences. The research intends to reveal the most influencing factors, including gender, format, different images and recall. Earlier researchers have argued that females are inclined to rate advertisements more positively than men. Five different, but interconnected studies, one content analysis and four surveys, were implicated in order to measure the responses to advertising. It is further su...

  9. Investigation on influencing factors of 5-HMF content in Schisandra *

    OpenAIRE

    Xu, Qing; Li, Ying-hua; Lü, Xiu-yang

    2007-01-01

    In order to investigate the influencing factors of 5-hydroxymethyl-2-furaldehyde (5-HMF) content in Schisandra, confirm the theory of 5-HMF deriving mainly from Schisandra processing course, and give some suggestions about the Schisandra processing method, the 5-HMF contents in decoctions of Schisandra under different heating temperature, decocting time, soaking time, processing methods and treatment with different solvents before decocting the Schisandra were measured by RP-HPLC method. The ...

  10. Factors Influencing Students' Self-Concept among Malaysian Students

    OpenAIRE

    Z. Ishak; S. Jamaluddin; F.P Chew

    2010-01-01

    This paper examines the students’ self-concept among 16- and 17- year- old adolescents in Malaysian secondary schools. Previous studies have shown that positive self-concept played an important role in student adjustment and academic performance during schooling. This study attempts to investigate the factors influencing students’ perceptions toward their own self-concept. A total of 1168 students participated in the survey. This study utilized the CoPs (UM) instrument to measure self-concept...

  11. [Bioavailability and factors influencing its rate].

    Science.gov (United States)

    Vraníková, Barbora; Gajdziok, Jan

    Bioavailability can be defined as the rate and range of active ingredient absorption, when it becomes available in the systemic circulation or at the desired site of drug action, respectively. Drug bioavailability after oral administration is affected by anumber of different factors, including physicochemical properties of the drug, physiological aspects, the type of dosage form, food intake, biorhythms, and intra- and interindividual variability of the human population. This article is the first from the series dealing with the bioavailability and methods leading to its improvement. The aim of the present paper is to provide an overview of aspects influencing the rate of bioavailability after oral administration of the active ingredient. Subsequentarticles will provide detailed descriptions of methods used for dug bioavailability improvement, which are here only summarized.

  12. Factors influencing initiation of breast-feeding.

    Science.gov (United States)

    Ekwo, E E; Dusdieker, L B; Booth, B M

    1983-04-01

    We used the critical incidence method to study factors motivating 33 primigravidas and 39 multigravidas to initiate breast-feeding of their infants. Women chose breast-feeding because they believed that it would provide protection to the infant against infection, establish maternal-infant bonding, was convenient, provided better nutrition than cow's milk formula, was emotionally satisfying, and was the natural way to feed infants. The decision to breast-feed was made well in advance of pregnancy by primigravidas and shortly before pregnancy by multigravidas. Friends who had successfully nursed infants were as influential as immediate family members in influencing our study subjects in their decision to breast-feed. Prenatal counseling, though important, may not be the optimal period for motivating women to breast-feed.

  13. Factors influencing presence in virtual worlds.

    Science.gov (United States)

    Chow, Meyrick C M

    2012-01-01

    Virtual worlds are showing potential as an effective platform for a variety of activities, including learning. The concept of presence (the sensation of "being there" in a mediated environment) has received substantial attention from the virtual reality community, and the effectiveness of virtual worlds has often been linked to the feelings of presence reported by their users. The present study examined the effects of attitude and perceived ease of use on sense of presence in Second Life, which is one of the most known and used virtual worlds. Based on data from a survey of 206 nursing students, hypotheses are empirically tested. Findings suggest that users' attitude toward using Second Life and their perceived ease of use of it have a positive effect on their sense of presence in the virtual environment. This study advances our understanding of factors influencing presence in virtual worlds.

  14. FACTORS INFLUENCING THE MANAGEMENT OF ADHD

    Directory of Open Access Journals (Sweden)

    S ARMAN

    2003-03-01

    Full Text Available Introduction: Attention deficit hyperactivity disorder (ADHDis the most common psychiatric disorder among school age children. It consists of hyperactivity, inattention and impulsive behavior. The onset of the disorder is before the age of 7 years and it happens at least in two situations. It causes significant impairment in social and academic functioning. A determination of factors that influences the therapeutic response in ADHD is the aim of this study. Methods: This study is designed as an analytic descriptive on hyperactive children. The tools that were used was the interview with parents and it provided CSI-4 checklist. Results: Methylphenidate was completely effective in ADHD and oppositional defiant disorder and was effective in majority sign of conduct disorder. There wasn't any relation between therapeutic response and demographic characteristics. Discussion: Methylphenidate is effective not only in ADHD but also in mixed ADHD and disruptive behavior.

  15. Factors influencing consumer dietary health preventative behaviours.

    Science.gov (United States)

    Petrovici, Dan A; Ritson, Christopher

    2006-09-01

    The deterioration of the health status of the Romanian population during the economic transition from a centrally planned to a free market economy has been linked to lifestyles factors (e.g. diet) regarded as a main determinants of the disparity in life expectancy between Eastern and Western Europe. Reforms in the health care system in this transition economy aim to focus on preventive action. The purpose of this study was to identify the factors that impact on the individual decision to engage in Dietary Health Preventive Behaviour (DHPB) and investigate their influence in the context of an adapted health cognition model. A population-based study recruited 485 adult respondents using random route sampling and face-to-face administered questionnaires. Respondents' health motivation, beliefs that diet can prevent disease, knowledge about nutrition, level of education attainment and age have a positive influence on DHPB. Perceived barriers to healthy eating have a negative impact on alcohol moderation. The information acquisition behaviour (frequency of reading food labels) is negatively predicted by age and positively predicted by health motivation, education, self-reported knowledge about nutrition and household financial status. A significant segment of respondents believe they are not susceptible to the elicited diseases. Health promotion strategies should aim to change the judgments of health risk. The adaptation of the Health Belief Model and the Theory of Health Preventive Behaviour represents a valid framework of predicting DHPB. The negative sign of perceived threat of disease on DHPB may suggest that, under an income constraint, consumers tend to trade off long-term health benefits for short-term benefits. This cautions against the use of negative messages in public health campaigns. Raising the awareness of diet-disease relationships, knowledge about nutrition (particularly sources and risks associated with dietary fat and cholesterol) may induce people to

  16. Factors influencing consumer dietary health preventative behaviours

    Directory of Open Access Journals (Sweden)

    Ritson Christopher

    2006-09-01

    Full Text Available Abstract Background The deterioration of the health status of the Romanian population during the economic transition from a centrally planned to a free market economy has been linked to lifestyles factors (e.g. diet regarded as a main determinants of the disparity in life expectancy between Eastern and Western Europe. Reforms in the health care system in this transition economy aim to focus on preventive action. The purpose of this study was to identify the factors that impact on the individual decision to engage in Dietary Health Preventive Behaviour (DHPB and investigate their influence in the context of an adapted health cognition model. Methods A population-based study recruited 485 adult respondents using random route sampling and face-to-face administered questionnaires. Results and discussion Respondents' health motivation, beliefs that diet can prevent disease, knowledge about nutrition, level of education attainment and age have a positive influence on DHPB. Perceived barriers to healthy eating have a negative impact on alcohol moderation. The information acquisition behaviour (frequency of reading food labels is negatively predicted by age and positively predicted by health motivation, education, self-reported knowledge about nutrition and household financial status. A significant segment of respondents believe they are not susceptible to the elicited diseases. Health promotion strategies should aim to change the judgments of health risk. Conclusion The adaptation of the Health Belief Model and the Theory of Health Preventive Behaviour represents a valid framework of predicting DHPB. The negative sign of perceived threat of disease on DHPB may suggest that, under an income constraint, consumers tend to trade off long-term health benefits for short-term benefits. This cautions against the use of negative messages in public health campaigns. Raising the awareness of diet-disease relationships, knowledge about nutrition (particularly

  17. Variance of indoor radon concentration: Major influencing factors

    Energy Technology Data Exchange (ETDEWEB)

    Yarmoshenko, I., E-mail: ivy@ecko.uran.ru [Institute of Industrial Ecology UB RAS, Sophy Kovalevskoy, 20, Ekaterinburg (Russian Federation); Vasilyev, A.; Malinovsky, G. [Institute of Industrial Ecology UB RAS, Sophy Kovalevskoy, 20, Ekaterinburg (Russian Federation); Bossew, P. [German Federal Office for Radiation Protection (BfS), Berlin (Germany); Žunić, Z.S. [Institute of Nuclear Sciences “Vinca”, University of Belgrade (Serbia); Onischenko, A.; Zhukovsky, M. [Institute of Industrial Ecology UB RAS, Sophy Kovalevskoy, 20, Ekaterinburg (Russian Federation)

    2016-01-15

    Variance of radon concentration in dwelling atmosphere is analysed with regard to geogenic and anthropogenic influencing factors. Analysis includes review of 81 national and regional indoor radon surveys with varying sampling pattern, sample size and duration of measurements and detailed consideration of two regional surveys (Sverdlovsk oblast, Russia and Niška Banja, Serbia). The analysis of the geometric standard deviation revealed that main factors influencing the dispersion of indoor radon concentration over the territory are as follows: area of territory, sample size, characteristics of measurements technique, the radon geogenic potential, building construction characteristics and living habits. As shown for Sverdlovsk oblast and Niška Banja town the dispersion as quantified by GSD is reduced by restricting to certain levels of control factors. Application of the developed approach to characterization of the world population radon exposure is discussed. - Highlights: • Influence of lithosphere and anthroposphere on variance of indoor radon is found. • Level-by-level analysis reduces GSD by a factor of 1.9. • Worldwide GSD is underestimated.

  18. Factors influencing choice of oral hygiene products by dental ...

    African Journals Online (AJOL)

    Background: Several factors, such as cost, branding, packaging and family influence, had been implicated as influencing the choice of toothpastes and toothbrushes by individuals. Media advertisement is also considered a very strong factor influencing consumer's choice. Aim: To assess the extent to which some factors ...

  19. Factors Influencing Students’ Perceptions of Online Teamwork

    Directory of Open Access Journals (Sweden)

    Irina Falls

    2014-02-01

    Full Text Available The evolution of online teaching in higher education demands a change in the types of pedagogies used in those courses. An example of one of these important pedagogies includes online teamwork. Teamwork in this context is one in which the majority of the individual’s grade is dependent on the positive or negative group experiences. This study utilized the theoretical framework of social motivation and cohesion to identify the factors shaping students’ perceptions of teamwork in online college courses. In these courses, the pedagogical approach known as the Five Pillars of effective collaborative work was applied. An Online Teamwork Learning Survey was developed based on these principles and completed by 62 undergraduate students enrolled in semester-long online courses required in their early childhood education program of study. Using a comparison between pre–postsurveys and regression analysis, the results showed that although the students’ perceptions of teamwork did not significantly change, the factors influencing their responses during the posttest doubled in number. The results showed that through carefully designed virtual teamwork activities, students learned that essential team characteristics such as promotive interaction, individual accountability, and positive interdependence are an integral part of effective collaboration and strong predictors of teamwork perception.

  20. Factors Influencing Teamwork in Health Care

    Directory of Open Access Journals (Sweden)

    Mijal Michał

    2017-06-01

    Full Text Available The purpose of this paper is to analyse different views on interpersonal relations and team composition among managers and medical professionals with respect to the transition of professional roles in healthcare in Poland. To achieve that goal, a description based on a quantitative and qualitative questionnaire was conducted. Since the questionnaire covered various areas of health care, only its small fraction was used for the analysis. The main result is that most of the medical professionals and medical managers consider technology to be the single most important external factor influencing the team work efficiency and team composition in health care, and the managers consider skillset as the crucial factor determining whether a person would be a good team member. Based on the literature on professional roles in health care and their evolution in recent years, one can assume that constant development and lifelong learning would play a significant role in the healthcare systems reform. The findings are an important contribution to the discussion of the healthcare reform and its possible directions in future years as well a reference point for policy makers.

  1. Factors influencing warfarin control in Australia and Singapore.

    Science.gov (United States)

    Bernaitis, Nijole; Ching, Chi Keong; Teo, Siew Chong; Chen, Liping; Badrick, Tony; Davey, Andrew K; Crilly, Julia; Anoopkumar-Dukie, Shailendra

    2017-09-01

    Warfarin is widely used for patients with non-valvular atrial fibrillation (NVAF). Variations in warfarin control, as measured by time in therapeutic range (TTR), have been reported across different regions and ethnicities, particularly between Western and Asian countries. However, there is limited data on comparative factors influencing warfarin control in Caucasian and Asian patients. Therefore, the aim of this study was to determine warfarin control and potential factors influencing this in patients with NVAF in Australia and Singapore. Retrospective data was collected for patients receiving warfarin for January to June 2014 in Australia and Singapore. TTR was calculated for individuals with mean patient TTR used for analysis. Possible influential factors on TTR were analysed including age, gender, concurrent co-morbidities, and concurrent medication. The mean TTR was significantly higher in Australia (82%) than Singapore (58%). At both sites, chronic kidney disease significantly lowered this TTR. Further factors influencing control were anaemia and ageWarfarin control was significantly higher in Australia compared to Singapore, however chronic kidney disease reduced control at both sites. The different levels of control in these two countries, together with patient factors further reducing control may impact on anticoagulant choice in these countries with better outcomes from warfarin in Australia compared to Singapore. Copyright © 2017 Elsevier Ltd. All rights reserved.

  2. Factors influencing induction of adaptive response

    International Nuclear Information System (INIS)

    Misonoh, Jun; Ojima, Mitsuaki; Yonezawa, Morio

    2000-01-01

    Exposure to low doses of X-rays makes ICR mice resistant to subsequent sublethal irradiation and decrease mortality from hematopoietic death. Many factors, however, influence the induction of radioresistance. For instances, in ICR mice, the priming irradiation with 0.50 Gy was effective in the induction of radioresistance, when it is given at 6-week old, 2 weeks prior to subsequent sublethal irradiation. One hundred-fifty kV X-ray filtered off the soft component through 1.0 mm aluminum and 0.2 mm copper induces radioadaptive response as well as the harder radiation such as 260 kV X-ray filtered through 0.5 mm aluminum and 0.3 mm copper. Dose rate of priming irradiation also seemed to influence the induction of radioresistance. Priming irradiation with 0.50 Gy at 0.50 Gy/min and 0.25 Gy/min induced adaptive response, while same 0.50 Gy given at 0.063 Gy/min didn't. To make the matter complicated, when mice were pre-irradiated with 0.50 Gy at 0.013 Gy/min in the irradiation cell which was 1.2 x 1.2 x 1.4 times larger than the usual one, adaptive response was induced again. These results suggested that mice felt more uncomfortable when they were packing in the irradiation cell with little free space even for several minutes than when they were placed in the cell with much free space for about 40 minutes, and such a stress might give the mice some resistance to the subsequent sublethal irradiation. (author)

  3. Factors Potentially Influencing Student Acceptance of Biological Evolution

    Science.gov (United States)

    Wiles, Jason R.

    This investigation explored scientific, religious, and otherwise nonscientific factors that may influence student acceptance of biological evolution and related concepts, how students perceived these factors to have influenced their levels of acceptance of evolution and changes therein, and what patterns arose among students' articulations of how their levels of acceptance of evolution may have changed. This exploration also measured the extent to which students' levels of acceptance changed following a treatment designed to address factors identified as potentially affecting student acceptance of evolution. Acceptance of evolution was measured using the MATE instrument (Rutledge and Warden, 1999; Rutledge and Sadler, 2007) among participants enrolled in a secondary-level academic program during the summer prior to their final year of high school and as they transitioned to the post-secondary level. Student acceptance of evolution was measured to be significantly higher than pre-treatment levels both immediately following and slightly over one year after treatment. Qualitative data from informal questionnaires, from formal course evaluations, and from semi-structured interviews of students engaged in secondary level education and former students at various stages of post-secondary education confirmed that the suspected factors were perceived by participants to have influenced their levels of acceptance of evolution. Furthermore, participant reports provided insight regarding the relative effects they perceived these factors to have had on their evolution acceptance levels. Additionally, many participants reported that their science teachers in public schools had avoided, omitted, or denigrated evolution during instruction, and several of these students expressed frustration regarding what they perceived to have been a lack of education of an important scientific principle. Finally, no students expressed feelings of being offended by having been taught about

  4. Factors influencing the profitability of optimizing control systems

    International Nuclear Information System (INIS)

    Broussaud, A.; Guyot, O.

    1999-01-01

    Optimizing control systems supplement conventional Distributed Control Systems and Programmable Logic Controllers. They continuously implement set points, which aim at maximizing the profitability of plant operation. They are becoming an integral part of modern mineral processing plants. This trend is justified by economic considerations, optimizing control being among the most cost-effective methods of improving metallurgical plant performance. The paper successively analyzes three sets of factors, which influence the profitability of optimizing control systems, and provides guidelines for analyzing the potential value of an optimizing control system at a given operation: external factors, such as economic factors and factors related to plant feed; features of the optimizing control system; and subsequent maintenance of the optimizing control system. It is shown that pay back times for optimization control projects are typically measured in days. The OCS software used by the authors for their applications is described briefly. (author)

  5. Fundamental factors influencing portal image quality

    International Nuclear Information System (INIS)

    Jaffray, D.A.

    1995-01-01

    It has been recognized that improved methods of verifying radiation field placement in external beam radiotherapy are required in order to make frequent checks of field placement feasible. As a result, a large number of electronic portal imaging systems have been developed as possible replacements for film. These developments have produced digital systems with faster acquisition and improved display contrast, however, the quality of the images acquired with such systems is still disappointing. This presentation examines many of the fundamental factors which limit the quality of radiographs obtained with a megavoltage radiotherapy beam. The size and shape of the radiation sources (focal and extra-focal) in radiotherapy machines and their influence on the spatial resolution of portal images are examined. Monte Carlo simulations of x-ray interactions within the patient determined that a significant fraction of the x-ray scatter generated in the patient is due to bremsstrahlung and positron annihilation. Depending on the detector, the scatter signal can reduce the differential signal-to-noise by 20%. Furthermore, a Monte Carlo study of the interaction of x-rays within typical fluoroscopic imaging detectors (metal plate/phosphor screen) demonstrates the degrading effect of energy absorption noise on the detective quantum efficiency of fluoroscopic based imaging systems. Finally, the spatial frequency content in the x-ray shadowgram is demonstrated to change with x-ray energy, resulting in images that appear to have reduced spatial resolution at megavoltage energies. The relative magnitude of each of these factors will be presented and recommendations for the next generation of portal imaging systems will be made

  6. Review on Factors Influencing Physician Guideline Adherence in Cardiology.

    Science.gov (United States)

    Hoorn, C J G M; Crijns, H J G M; Dierick-van Daele, A T M; Dekker, L R C

    2018-04-09

    Cardiovascular disease is the most common cause of death in Western countries. Physician adherence to guidelines is often suboptimal, resulting in impaired patient outcome and prognosis. Multiple studies have been conducted to evaluate patterns and the influencing factors of patient adherence, but little is known about factors influencing physician guideline adherence. This review aims to identify factors influencing physician guideline adherence relevant to cardiology and to provide insights and suggestions for future improvement. Physician adherence was measured as adherence to standard local medical practice and applicable guidelines. Female gender and older age had a negative effect on physician guideline adherence. In addition, independent of the type of heart disease, physicians without cardiologic specialization were linked to physician noncompliance. Also, guideline adherence in primary care centers was at a lower level compared to secondary or tertiary care centers. The importance of guideline adherence increases as patients age, and complex diseases and comorbidity arise. Appropriate resources and interventions, taking important factors for nonadherence in account, are necessary to improve guideline adoption and adherence in every level of the chain. This in turn should improve patient outcome.

  7. Accuracy of exhaust emission factor measurements on chassis dynamometer

    NARCIS (Netherlands)

    Joumard, R.; Laurikko, J.; Han, T.L.; Geivanidis, S.; Samaras, Z.; Merétei, T.; Devaux, P.; André, J.-M.; Cornelis, E.; Lacour, S.; Prati, M.V.; Vermeulen, R.; Zallinger, M.

    2009-01-01

    The influence of 20 parameters on the measurement of light-vehicle emission factors on chassis dynamometer based on driving patterns, vehicle-related parameters, vehicle sampling, and laboratory-related parameters, was studied. The results were based on literature synthesis, ≈ 2700 specific tests

  8. Factors influencing creep model equation selection

    International Nuclear Information System (INIS)

    Holdsworth, S.R.; Askins, M.; Baker, A.; Gariboldi, E.; Holmstroem, S.; Klenk, A.; Ringel, M.; Merckling, G.; Sandstrom, R.; Schwienheer, M.; Spigarelli, S.

    2008-01-01

    During the course of the EU-funded Advanced-Creep Thematic Network, ECCC-WG1 reviewed the applicability and effectiveness of a range of model equations to represent the accumulation of creep strain in various engineering alloys. In addition to considering the experience of network members, the ability of several models to describe the deformation characteristics of large single and multi-cast collations of ε(t,T,σ) creep curves have been evaluated in an intensive assessment inter-comparison activity involving three steels, 21/4 CrMo (P22), 9CrMoVNb (Steel-91) and 18Cr13NiMo (Type-316). The choice of the most appropriate creep model equation for a given application depends not only on the high-temperature deformation characteristics of the material under consideration, but also on the characteristics of the dataset, the number of casts for which creep curves are available and on the strain regime for which an analytical representation is required. The paper focuses on the factors which can influence creep model selection and model-fitting approach for multi-source, multi-cast datasets

  9. Influencing factors on the visibility of surface distresses

    Science.gov (United States)

    Smęt, Wojciech; Skakuj, Marek

    2018-05-01

    A systematic and future-oriented maintenance management requires quality-assured data regarding the condition of the roadway. An important characteristic for assessing the condition of the road surface are cracks [1]. Experience has proven that the road surface temperature and residual humidity can influence the visibility of cracks. To investigate and quantify these influencing factors in more detail, the Federal Ministry of Transport and Digital Infrastructure has implemented a comprehensive research project [2], during which several measurement campaigns were carried out at different seasons and at different temperatures and humidity degrees of the road surface. The visibility of the cracks was assessed using the German approach ZTV ZEB-StB [3]. After evaluating the cracks, the data was synchronized and the network allocation of the geo-referenced raw data was realized. The relevant condition performance indicators were calculated subsequently. For each evaluation section of 100 meters length, the mean road surface temperature was calculated and, if available, the type and year of construction of the surface course was determined. The evaluated data was visualized to establish correlations between the data and the influencing factors. For the statistical analysis of the results, a total of six comparative scenarios were defined in which the influencing factors of road surface temperature and residual humidity were assessed. This paper documents the results of the research project. In order to obtain a uniform and comparable picture of the condition of the road surface over the years and thus to be able to observe the aging process of the road surface, the measurement campaigns are to be carried out under defined conditions. The research project included proposals for defining and further specifying the measurement conditions.

  10. [Coagulation factor VII levels in uremic patients and theirs influence factors].

    Science.gov (United States)

    Fang, Jun; Xia, Ling-Hui; Wei, Wen-Ning; Song, Shan-Jun

    2004-12-01

    This study was aimed to investigate coagulation factor VII level in uremic patients with chronic renal failure and to explore theirs influence factors. The plasma levels of coagulation factor VII were detected in 30 uremic patients with chronic renal failure before and after hemodialysis for 1 month, the factor VII activity (FVII:C) was determined by one-stage coagulation method, while activated factor VII (FVIIa) was measured by one-stage coagulation method using recombinant soluble tissue factor, and factor VII antigen was detected by ELISA. The results showed that: (1) The FVIIa, FVII:C and FVIIAg levels in chronic uremic patients before hemodialysis were 4.00 +/- 0.86 microg/L, (148.5 +/- 40.4)% and (99.8 +/- 21.1)% respectively, which were significantly increased, as compared with healthy controls [2.77 +/- 1.02 microg/L, (113.1 +/- 33.0)% and (73.7 +/- 18.3)% respectively, P factor VII was positively correlated with levels of blood uria nitrogen and serum creatinine before hemodialysis but not after hemodialysis. It is concluded that the enhanced levels of coagulation factor VII in chronic uremic patients suggested abnormal activated state, herperactivity and elevated production of factor VII which correlated with renal functional injury. The abnormality of factor VII in uremia may be aggravated by hemodialysis. Coagulation factor (FVII) may be a risk factor for cardiovascular events in uremic patients who especially had been accepted long-term hemodialysis.

  11. Organizational factors influencing improvements in safety

    International Nuclear Information System (INIS)

    Marcus, A.; Nichols, M.L.; Olson, J.; Osborn, R.; Thurber, J.

    1991-01-01

    Results of conceptual and empirical research conducted by this research team, and published in NUREG-CR 5437, suggested that processes of organizational problem solving and learning provide a promising area for understanding improvement in safety-related performance in nuclear power plants. In this paper the authors describe the way in which they have built upon that work and gone much further in empirically examining a range of potentially important organizational factors related to safety. The paper describes (1) overall trends in plant performance over time on the Nuclear Regulatory Commission performance indicators, (2) the major elements in the conceptual framework guiding the current work, which seeks among other things to explain those trends, (3) the specific variables used as measures of the central concepts, (4) the results to date of the quantitative empirical work and qualitative work in progress, and (5) conclusions from the research

  12. Factors influencing EPR dosimetry in fingernails

    International Nuclear Information System (INIS)

    Dubner, D.L.; Spinella, M.R.; Bof, E.

    2010-01-01

    The technique based on the detection of ionizing radiation induced radicals by EPR in tooth enamel is an established method for the dosimetry of exposed persons in radiological emergencies. Dosimetry based on EPR spectral analysis of fingernail clippings, currently under development, has the practical advantage of the easier sample collection. A limiting factor is that overlapping the radiation induced signal (RIS), fingernails have shown the presence of two mechanically induced signals, called MIS1 and MIS2, due to elastic and plastic deformation respectively, at the time of fingernails cutting. With a water treatment, MIS1 is eliminated while MIS2 is considerably reduced. The calibration curves needed for radiation accident dosimetry should have 'universal' characteristics, ie. Represent the variability that can be found in different individuals. Early studies were directed to the analysis of factors affecting the development of such universal calibration curves. The peak to peak amplitude of the signal before and after the water treatment as well as the effect of size and number of clippings were studied. Furthermore, the interpersonal and intrapersonal variability were analyzed. Taking into account these previous studies, the optimal conditions for measurement were determined and EPR spectra of samples irradiated at different doses were used for the developing of dose-response curves. This paper presents the analysis of the results.(authors) [es

  13. An Investigation into factors influencing the choice of business ...

    African Journals Online (AJOL)

    There was significant difference between male and female career influencing factors. There was no significant difference regarding the influence exercised by parent in the students' choice of Business Education. There is significant difference between male and female in the influence exerted by external factors in their ...

  14. Factors influencing surface roughness of polyimide film

    International Nuclear Information System (INIS)

    Yao Hong; Zhang Zhanwen; Huang Yong; Li Bo; Li Sai

    2011-01-01

    The polyimide (PI) films of pyromellitic dianhydride-oxydiamiline (PMDA-ODA) were fabricated using vapor deposition polymerization (VDP) method under high vacuum pressure of 10-4 Pa level. The influence of equipment, substrate temperature, the process of heating and deposition ratio of monomers on the surface roughness of the PI films was investigated. The surface topography of films was measured by interferometer microscopy and scanning electron microscopy(SEM), and the surface roughness was probed with atomic force microscopy(AFM). The results show that consecutive films can be formed when the distance from steering flow pipe to substrate is 74 cm. The surface roughnesses are 291.2 nm and 61.9 nm respectively for one-step heating process and multi-step heating process, and using fine mesh can effectively avoid the splash of materials. The surface roughness can be 3.3 nm when the deposition rate ratio of PMDA to ODA is 0.9:1, and keeping the temperature of substrate around 30 degree C is advantageous to form a film with planar micro-surface topography. (authors)

  15. Health related quality of life and influencing factors among welders.

    Directory of Open Access Journals (Sweden)

    Jingxiang Qin

    Full Text Available BACKGROUND: Occupational exposure to welding fumes is a serious occupational health problem all over the world. Welders are exposed to many occupational hazards; these hazards might cause some occupational diseases. The aim of the study was to assess the health related quality of life (HRQL of electric welders in Shanghai China and explore influencing factors to HRQL of welders. METHODS: 301 male welders (without pneumoconiosis and 305 non-dust male workers in Shanghai were enrolled in this study. Short Form-36 (SF-36 health survey questionnaires were applied in this cross-sectional study. Socio-demographic, working and health factors were also collected. Multiple stepwise regress analysis was used to identify significant factors related to the eight dimension scores. RESULTS: Six dimensions including role-physical (RP, bodily pain (BP, general health (GH, validity (VT, social function (SF, and mental health (MH were significantly worse in welders compared to non-dust workers. Multiple stepwise regress analysis results show that native place, monthly income, quantity of children, drinking, sleep time, welding type, use of personal protective equipment (PPE, great events in life, and some symptoms including dizziness, discomfort of cervical vertebra, low back pain, cough and insomnia may be influencing factors for HRQL of welders. Among these factors, only sleep time and the use of PPE were salutary. CONCLUSIONS: Some dimensions of HRQL of these welders have been affected. Enterprises which employ welders should take measures to protect the health of these people and improve their HRQL.

  16. Factors Influencing Learning Environments in an Integrated Experiential Program

    Science.gov (United States)

    Koci, Peter

    The research conducted for this dissertation examined the learning environment of a specific high school program that delivered the explicit curriculum through an integrated experiential manner, which utilized field and outdoor experiences. The program ran over one semester (five months) and it integrated the grade 10 British Columbian curriculum in five subjects. A mixed methods approach was employed to identify the students' perceptions and provide richer descriptions of their experiences related to their unique learning environment. Quantitative instruments were used to assess changes in students' perspectives of their learning environment, as well as other supporting factors including students' mindfulness, and behaviours towards the environment. Qualitative data collection included observations, open-ended questions, and impromptu interviews with the teacher. The qualitative data describe the factors and processes that influenced the learning environment and give a richer, deeper interpretation which complements the quantitative findings. The research results showed positive scores on all the quantitative measures conducted, and the qualitative data provided further insight into descriptions of learning environment constructs that the students perceived as most important. A major finding was that the group cohesion measure was perceived by students as the most important attribute of their preferred learning environment. A flow chart was developed to help the researcher conceptualize how the learning environment, learning process, and outcomes relate to one another in the studied program. This research attempts to explain through the consideration of this case study: how learning environments can influence behavioural change and how an interconnectedness among several factors in the learning process is influenced by the type of learning environment facilitated. Considerably more research is needed in this area to understand fully the complexity learning

  17. Urban water consumption and its influencing factors in China

    NARCIS (Netherlands)

    Fan, Liangxin; Gai, Lingtong; Tong, Yan; Li, Ruihua

    2017-01-01

    Factors that affect water consumption should be identified to develop effective public policies. However, factors influencing domestic water consumption in cities in China, particularly on a national scale, are unclear. In this study, urban water consumption and its influencing factors in 286

  18. Factors influencing choice of paediatrics as a career among medical ...

    African Journals Online (AJOL)

    None of the male students but 12 of the female students (30%) considered gender distribution to be a factor influencing their career choice (p=0.046). Conclusion. This study indicates that paediatrics is popular among female students and that several factors influence choice of this specialty. Understanding these factors may ...

  19. An empirical investigation on factors influencing on exporting medicinal plants

    Directory of Open Access Journals (Sweden)

    Hoda Nosouzi

    2013-06-01

    Full Text Available During the past few years, there have been growing interests on developing medicinal plant industry. This paper presents an empirical study on important factors influencing medicinal plant for developing exports in Iran. The proposed study of this paper designs a questionnaire and distributes it among 310 regular customers who are involved in this industry in city of Tehran, Iran. Cronbach alpha has been calculated as 0.802. In addition, Kaiser-Meyer-Olkin Measure of Samplng =KMO test was also computed and it was about 0.66, which is above the minimum acceptable limit of 0.5. The study uses Scree plot to determine important factors and there are eight factors including environmental issues, export supportive issues, potentials for export, business plan, export plan, structural barriers, competition capability and strategy.

  20. Factors Influencing Prevention and Control of Malaria among ...

    African Journals Online (AJOL)

    AJRH Managing Editor

    investigate factors that influence malaria prevention and control practices among pregnant ... treatment of clinical cases and the promotion of ... influence their decision regarding malaria ..... have the ability to purchase anti-malaria drugs that.

  1. Factors influencing the adoption of mobile financial services in the ...

    African Journals Online (AJOL)

    Factors influencing the adoption of mobile financial services in the unbanked population. ... Inkanyiso: Journal of Humanities and Social Sciences ... the influences of the adoption behaviour at different level of market maturity and points of time.

  2. Factors influencing the usage of different types of malaria prevention ...

    African Journals Online (AJOL)

    Objective: To examine factors which influence the use of different types of malaria prevention ... risk areas, religion, education and income influenced ITN usage, whereas only age, malaria .... the uptake of IPTp given that the person would not.

  3. Factors influencing cassava - pulp fermentation period for gari ...

    African Journals Online (AJOL)

    Factors influencing cassava - pulp fermentation period for gari processing among ... Result of probit model analysis at 5% significance level shows an R value ... Marital status (2.236**) and respondents' cultural influences (1.960**) were ...

  4. Factors that influencing veterinary drug’s metabolisation

    Directory of Open Access Journals (Sweden)

    Cristina, Romeo T.

    2007-12-01

    Full Text Available The paper wants to make a recall for the vet practitioners, of the main veterinary drug's metabolism rate influencing factors. Among the most important physiological factors (pharmacokinetics, sanguine flow and urinary ones, plasmatic proteins binding, enzymatic induction and inhibition are essential. Between the animal’s bounded factors more important are: species, individuality, age, sex, pregnancy, alimentation, genetic factors, and health status and from exogenous factors, daily rhythm, influences of chemical compounds and of the stress are presented.

  5. A Comparison of Factors that Influence the Lyophilization Process

    OpenAIRE

    Mnerie, Dumitru; Anghel, Gabriela Victoria; Mnerie, Alin Vasile; Cheveresan, Constantin

    2007-01-01

    The lyophilization (or freeze drying) process for agro-foods products depends on a series of technological factors that are in an inter-dependence with the process performance. This paper presents an expert method and its application. This method characterizes the influence factors of the lyophilization process, after the importance level of some factors in correlation with other factors, is defined. Only the most important factors were considered; influence considerations were made in relati...

  6. Influence Factors of the Economic Development Level Across European Countries

    Directory of Open Access Journals (Sweden)

    Diana Ioana POPA

    2016-06-01

    Full Text Available The economic development level of a country refers to the measure of the progress in an economy that could be measured, especially through GDP or GDP per capita. The level of these indicators can be influenced by many factors as a large scale, from social and economical to environmental and government policies factors. The paper aims to investigate some of these influence factors of the economic development level, represented in this case by GDP per capita, across European countries in the context of the most recently crisis, named the Great Recession (2008 and after, when the economies are starting to recover (2013. Using linear regression in R (lm function, the goal is to explain the relationship between the interest variable (GDP per capita and certain independent variables. It is expected that even tough the estimators are to be different – as level – in both cases studied, the relationship type between them to be the same. The goodness of fit for the models used will be made based on ANOVA.

  7. Influence of physical and biological factors in cellular radiosensitivity

    International Nuclear Information System (INIS)

    García Lima, Omar

    2016-01-01

    The use of therapeutic radiopharmaceuticals is associated with radiation damage, and this at-nuclear physical properties of radionuclides used and the characteristics of the irradiated cells. The work deals with the damage caused by radiation to DNA, factors that condition and tools that can be used to measure it. It presents current concepts of death and cellular radiosensitivity, based on the pioneering work in this field. Enter the neighborhood effect and adaptive response and evaluates the influence of the same in the paradigms of classical radiobiology. (author)

  8. Kids in Communities Study (KiCS) study protocol: a cross-sectional mixed-methods approach to measuring community-level factors influencing early child development in Australia.

    Science.gov (United States)

    Goldfeld, Sharon; Villanueva, Karen; Tanton, Robert; Katz, Ilan; Brinkman, Sally; Woolcock, Geoffrey; Giles-Corti, Billie

    2017-03-13

    Healthy childhood development in the early years is critical for later adult health and well-being. Early childhood development (ECD) research has focused primarily on individual, family and school factors, but largely ignored community factors. The Kids in Communities Study (KiCS) will test and investigate community-level influences on child development across Australia. Cross-sectional mixed-methods study exploring community-level effects in 25 Australian local communities; selection based on community socioeconomic status (SES) and ECD using the Australian Early Development Census (AEDC), a population measure of child development, to create a local community 'diagonality type', that is, those performing better or worse (off-diagonal), or as expected (on-diagonal) on the AEDC relative to their SES. Data collection includes stakeholder interviews, parent and service provider focus groups, and surveys with general community residents and service providers, mapping of neighbourhood design and local amenities and services, analysis of policy documents, and the use of existing sociodemographic and early childhood education and care data. Quantitative data will be used to test associations between local community diagonality type, and ECD based on AEDC scores. Qualitative data will provide complementary and deeper exploration of these same associations. The Royal Children's Hospital Human Research Ethics Committee approved the study protocol (#30016). Further ethics approvals were obtained from State Education and Health departments and Catholic archdioceses where required. ECD community-level indicators will eventually be derived and made publically available. Findings will be published in peer-reviewed journals, community reports, websites and policy briefs to disseminate results to researchers, and key stakeholders including policymakers, practitioners and (most importantly) the communities involved. Published by the BMJ Publishing Group Limited. For permission to

  9. factors influencing condom use among nigerian undergraduates

    African Journals Online (AJOL)

    2012-12-01

    Dec 1, 2012 ... Nigeria. Study design: Both qualitative (focus group discussions) and quantitative (cross-sectional ... Keywords: Condom, unsafe sex, HIV, gender, undergraduates. ..... QUESTIONS: the following may influence condom.

  10. Measurement of the pion form factor

    International Nuclear Information System (INIS)

    Dally, E.; Hauptman, J.; May, C.

    1977-01-01

    The pion form factor has been measured in the momentum transfer range of 0.03( 2 by scattering pions from atomic electrons in a liquid hydrogen target. The pion form factor is defined to be the elastic scattering cross section divided by that predicted for a point pion. The experiment has been performed in a 100 GeV/c negative pion beam incident on a 50 cm liquid hydrogen target at Fermi laboratory. The corrected form factor equals 0.33+-0.06 f 2 . Vector dominance predicts 0.40 f 2

  11. External factors influencing the environmental performance of South African firms

    CSIR Research Space (South Africa)

    Peart, R

    2001-01-01

    Full Text Available This article reviews the external factors that influence environmental performance of companies in South Africa, drawing on international and local literature. After considering factors within the natural, social, economic and institutional...

  12. Factors influencing women\\'s decisions to purchase specific children ...

    African Journals Online (AJOL)

    Factors influencing women\\'s decisions to purchase specific children\\'s ... they had selected a children's multi-nutrient supplement with the intention of buying it. ... Price, performance and brand loyalty, affect and normative factors were most ...

  13. An Evaluation on Factors Influencing Decision making for Malaysia Disaster Management: The Confirmatory Factor Analysis Approach

    Science.gov (United States)

    Zubir, S. N. A.; Thiruchelvam, S.; Mustapha, K. N. M.; Che Muda, Z.; Ghazali, A.; Hakimie, H.

    2017-12-01

    For the past few years, natural disaster has been the subject of debate in disaster management especially in flood disaster. Each year, natural disaster results in significant loss of life, destruction of homes and public infrastructure, and economic hardship. Hence, an effective and efficient flood disaster management would assure non-futile efforts for life saving. The aim of this article is to examine the relationship between approach, decision maker, influence factor, result, and ethic to decision making for flood disaster management in Malaysia. The key elements of decision making in the disaster management were studied based on the literature. Questionnaire surveys were administered among lead agencies at East Coast of Malaysia in the state of Kelantan and Pahang. A total of 307 valid responses had been obtained for further analysis. Exploratory Factor Analysis (EFA) and Confirmatory Factor Analysis (CFA) were carried out to analyse the measurement model involved in the study. The CFA for second-order reflective and first-order reflective measurement model indicates that approach, decision maker, influence factor, result, and ethic have a significant and direct effect on decision making during disaster. The results from this study showed that decision- making during disaster is an important element for disaster management to necessitate a successful collaborative decision making. The measurement model is accepted to proceed with further analysis known as Structural Equation Modeling (SEM) and can be assessed for the future research.

  14. Aorta measurements are heritable and influenced by bicuspid aortic valve

    Directory of Open Access Journals (Sweden)

    Lisa J Martin

    2011-09-01

    Full Text Available Abstract: Word Count 266, 1609 charactersObjectives: To determine whether the contributions of genetics and bicuspid aortic valve (BAV independently influence aortic (Ao dimensions.Background: Ao dilation is a risk factor for aneurysm, dissection, and sudden cardiac death. Frequent association of BAV with Ao dilation implicates a common underlying defect possibly due to genetic factors. Methods: Families enriched for BAV underwent standardized transthoracic echocardiography. In addition to BAV status, echocardiographic measures of Ao (annulus to descending Ao, pulmonary artery and mitral valve annulus diameters were obtained. Using variance components analysis, heritability was estimated with and without BAV status. Additionally, bivariate genetic analyses between Ao dimensions and BAV were performed.Results: Our cohort was obtained from 209 families enriched for BAV. After adjusting for age, body surface area and sex, individuals with BAV had a statistically significant increase in all echocardiographic measurements (p < 0.006 except descending Ao and mitral valve annulus. Individuals with BAV were at greater odds of having Ao dilation (OR = 4.44, 95% CI 2.93 – 6.72 than family members without BAV. All echocardiographic measurements exhibited moderate to strong heritability (0.25 to 0.53, and these estimates were not influenced by inclusion of BAV as a covariate. Bivariate genetic analyses supported that the genetic correlation between BAV and echo measures were not significantly different from zero.Conclusions: We show for the first time that echocardiographic measurements of Ao, pulmonary artery and mitral valve annulus diameters are quantitative traits that exhibit significant heritability. In addition, our results suggest the presence of BAV independently influences the proximal Ao and pulmonary artery measures but not those in the descending Ao or mitral valve annulus.

  15. Factors That Influence the Extensional Rheological Property of Saliva.

    Directory of Open Access Journals (Sweden)

    Amrita Vijay

    Full Text Available The spinnbarkeit of saliva reflects the ability of saliva to adhere to surfaces within the mouth, thereby serving as a protective role and aiding in lubrication. Therefore, alterations in the extensional rheology of saliva may result in the loss in adhesiveness or the ability to bind onto surfaces. Mucin glycoproteins and their structures are known to be important factors for the extensional rheological properties of saliva. The conformation of mucin depends on factors such as pH and ionic strength. Chewing is one of the main stimuli for salivary secretion but creates significant sheer stress on the salivary film which could influence mouthfeel perceptions. The current study investigates the possible factors which affect the extensional rheological properties of saliva by comparing submandibular/sublingual saliva with different oral stimuli within the same group of subjects. Unstimulated and stimulated saliva (chew, smell and taste salivas were collected primarily from submandibular/sublingual glands. The saliva samples were measured for Spinnbarkeit followed by the measuring mucin, total protein, total calcium and bicarbonate concentrations. The results indicated correlations between rheological properties and mucin/ion concentrations. However, chewing stimulated submandibular/sublingual saliva is shown to have significantly lower Spinnbarkeit, but factors such as mucin, protein and calcium concentrations did not account for this variation. Analysis of the concentration of bicarbonate and pH appears to suggest that it has a prominent effect on extensional rheology of saliva.

  16. Factors influencing quality of life in asthmatics

    DEFF Research Database (Denmark)

    Al-kalemji, Abir; Petersen, Karin Dam; Sørensen, Jan

    2013-01-01

    INTRODUCTION: The quality of life (QOL) in persons with asthma is reduced and different factors such as demography, asthma severity and psychiatric comorbidity play an influential role. However, little is known about the interplay of these factors. OBJECTIVE: To describe QOL in relation to asthma...

  17. Investigating important factors influencing electronic banking for export development

    Directory of Open Access Journals (Sweden)

    Vahid Abbas Zadeh

    2014-01-01

    Full Text Available Export is one of the most important indicators of a growing economy and it is the primary source of reaching sustainable growth on the market. This paper presents an empirical study to determine important factors influencing electronic banking in export development of Iranian organizations. The proposed study designs a questionnaire and distributes it among some regular customers who do internet banking with Parsian bank in city of Tehran, Iran. Cronbach alpha is calculated as 0.82, which is well above the minimum desirable limit of 0.70. In addition, Kaiser-Meyer-Olkin Measure of Sampling Adequacy and Approx. Chi-Square are 0.71 and 1955 with Sig. = 0.000, respectively. Using principal component analysis, the study has detected six factors including customer’s information, building trust, secure internet access, having good internet infrastructure and internet users.

  18. Perceptual load corresponds with factors known to influence visual search.

    Science.gov (United States)

    Roper, Zachary J J; Cosman, Joshua D; Vecera, Shaun P

    2013-10-01

    One account of the early versus late selection debate in attention proposes that perceptual load determines the locus of selection. Attention selects stimuli at a late processing level under low-load conditions but selects stimuli at an early level under high-load conditions. Despite the successes of perceptual load theory, a noncircular definition of perceptual load remains elusive. We investigated the factors that influence perceptual load by using manipulations that have been studied extensively in visual search, namely target-distractor similarity and distractor-distractor similarity. Consistent with previous work, search was most efficient when targets and distractors were dissimilar and the displays contained homogeneous distractors; search became less efficient when target-distractor similarity increased irrespective of display heterogeneity. Importantly, we used these same stimuli in a typical perceptual load task that measured attentional spillover to a task-irrelevant flanker. We found a strong correspondence between search efficiency and perceptual load; stimuli that generated efficient searches produced flanker interference effects, suggesting that such displays involved low perceptual load. Flanker interference effects were reduced in displays that produced less efficient searches. Furthermore, our results demonstrate that search difficulty, as measured by search intercept, has little bearing on perceptual load. We conclude that rather than be arbitrarily defined, perceptual load might be defined by well-characterized, continuous factors that influence visual search. PsycINFO Database Record (c) 2013 APA, all rights reserved.

  19. Factors influencing e-commerce development in Serbia

    OpenAIRE

    Kalinić, Zoran; Ranković, Vladimir; Kalinić, Ljubina

    2016-01-01

    In this paper, an overview of current state of e-commerce development in Serbia is presented. Also, some important factors influencing e-commerce diffusion are discussed. The factors are divided into four groups: technical factors, which cover e- commerce telecommunication and logistics infrastructure; legal factors, i.e. necessary laws and regulations on e-commerce; economic factors, and psychological factors and local culture. The study showed very strong correlation between broadband inter...

  20. Expecting success: Factors influencing ninth graders' science self-efficacy

    Science.gov (United States)

    Donahue, Elizabeth

    What factors influence ninth grade students' expectations for success in science? Using social cognitive theory and bioecological systems theory as theoretical frameworks, this dissertation employs data from the High School Longitudinal Study of 2009 (HSLS:09) to examine the relative impact of teacher practices and their perceived attitudes on students' science self-efficacy. Further, as they relate to this broader issue, the relative impact of student subjective task value and teacher characteristics is also investigated. It has been well documented that U.S. students are not achieving at satisfactory levels in science. Education policy has focused on improving science teacher quality as one way to address this problem. Teacher effectiveness has been primarily measured by student achievement on standardized tests. However, not enough attention has been given to the social cognitive factors that can lead to increased achievement and persistence in science as well as how teachers may influence these factors. This study interrogates the relationship between student and teacher variables and the social cognitive construct of self-efficacy, which has proven to have a significant impact on student achievement and persistence in science. Findings add to the current literature surrounding ways that educators may increase student performance in science by employing policies and practices that benefit the development of student science self-efficacy.

  1. Clinical factors influencing participation in society after successful kidney transplantation

    NARCIS (Netherlands)

    van der Mei, S.F.; Groothoff, J.W.; van Sonderen, E.L.P.; van den Heuvel, W.J.A.; de Jong, P.E.; van Son, W.J.

    2006-01-01

    Background. Little information is available on the degree of actual social functioning after successful kidney transplantation. Moreover, information on factors that influence participation in social activities is scarce. The aim of this study was to examine the influence of clinical factors on

  2. Factors influencing selection of office furniture by corporations and universities

    Science.gov (United States)

    R. Bruce Anderson

    1976-01-01

    Evaluation of the factors that influence the selection of office furniture by large corporations and universities shows that quality, appearance, and purchase price have the most important influence on the purchase decision. The intended use of the furniture and the appearance of the furniture were the key factors in the purchase of wooden furniture.

  3. Factors Influencing Pregnancy Desires among HIV Positive Women ...

    African Journals Online (AJOL)

    Factors Influencing Pregnancy Desires among HIV Positive Women in Sibande District in Mpumalanga, South Africa. ... Gender and Behaviour ... The objective of the study is to present findings on factors influencing pregnancy desires amongst HIV positive women that have participated in Prevention of Mother to child ...

  4. Psychosocial Factors Influencing Attitudes Towards Internet Piracy ...

    African Journals Online (AJOL)

    In all a total of two hundred and fifty participants were drawn through accidental sampling technique for this study. Their age ranged between 19-48 ... In the same view, consumers ethnic group was not found to significantly influence attitude towards Internet piracy (F(3,246) = .404, P> .05). Reasons were given why the ...

  5. Perceptions of Child Caregivers About Factors Influencing ...

    African Journals Online (AJOL)

    Nutrition, health education and measles immunization are crucial components of preventive eye health services in the prevention of corneal blindness. This study explores ... The interplay between nutrition and corneal blindness was unknown to mothers in this study. The strong influence ... effectiveness and sustainability.

  6. Factors Influencing Degradation of Mercaptans by Thiobacillus ...

    African Journals Online (AJOL)

    Degradation of methylmercaptans by Thiobacillus thioparus TK-m was influenced by pH of the reaction medium. Ratios of headspace concentrations in empty vials and those of acidified buffer solutions were less than 1.0. 95% of the H2S was in headspace with the remaining 5% in solution upon acidification. The values for ...

  7. Community Factors Influencing Birth Spacing among Married ...

    African Journals Online (AJOL)

    The significance of community-level demographic and fertility norms, gender norms, economic prosperity, and family planning behaviors demonstrate the broad influence of community variables on birth spacing outcomes. This analysis highlights the importance of moving beyond individual and household-level ...

  8. Influence of lifestyle factors on mammographic density in postmenopausal women.

    Directory of Open Access Journals (Sweden)

    Judith S Brand

    Full Text Available BACKGROUND: Mammographic density is a strong risk factor for breast cancer. Apart from hormone replacement therapy (HRT, little is known about lifestyle factors that influence breast density. METHODS: We examined the effect of smoking, alcohol and physical activity on mammographic density in a population-based sample of postmenopausal women without breast cancer. Lifestyle factors were assessed by a questionnaire and percentage and area measures of mammographic density were measured using computer-assisted software. General linear models were used to assess the association between lifestyle factors and mammographic density and effect modification by body mass index (BMI and HRT was studied. RESULTS: Overall, alcohol intake was positively associated with percent mammographic density (P trend  = 0.07. This association was modified by HRT use (P interaction  = 0.06: increasing alcohol intake was associated with increasing percent density in current HRT users (P trend  = 0.01 but not in non-current users (P trend  = 0.82. A similar interaction between alcohol and HRT was found for the absolute dense area, with a positive association being present in current HRT users only (P interaction  = 0.04. No differences in mammographic density were observed across categories of smoking and physical activity, neither overall nor in stratified analyses by BMI and HRT use. CONCLUSIONS: Increasing alcohol intake is associated with an increase in mammography density, whereas smoking and physical activity do not seem to influence density. The observed interaction between alcohol and HRT may pose an opportunity for HRT users to lower their mammographic density and breast cancer risk.

  9. Workplace violence and influencing factors among medical professionals in China.

    Science.gov (United States)

    Wu, Siying; Zhu, Wei; Li, Huangyuan; Lin, Shaowei; Chai, Wenli; Wang, Xiaorong

    2012-11-01

    Workplace violence has attracted increasing public attention over the past few decades in China. This study was conducted to evaluate the frequency of workplace violence in healthcare settings by various job titles and hospital departments, and to explore the related risk factors among Chinese medical professionals. A total of 2,464 medical professionals in 12 hospitals of two provinces were surveyed by using a stratified cluster sampling method. The Chinese version of the Workplace Violence Scale was used to measure the frequencies of workplace violence, classified as physical assault, emotional abuse, threat of assault, verbal sexual harassment and sexual assault experienced by the subjects over the previous 12 months. A structured questionnaire was administered to collect information on potentially influencing factors for workplace violence. Multivariate analysis was applied to determine the risk factors for workplace violence. About 50% of study subjects reported at least one type of workplace violence. The rates of experiencing two episodes or more of physical assault, emotional abuse, threat of assault, verbal sexual harassment, and sexual assault were 11%, 26%, 12%, 3%, and 1%, respectively. Identified risk factors for workplace violence included working in the departments of psychiatry, emergency, pediatrics and surgery, male gender, divorce/widowed status, long working hours (≥10 hr/day), and night shift. The study suggested that workplace violence occurs commonly in Chinese healthcare settings. Effective intervention strategies targeting workplace violence should be formulated in terms of major risk factors. Copyright © 2012 Wiley Periodicals, Inc.

  10. Factors influencing the prevalence of primary dysmenorrhoea ...

    African Journals Online (AJOL)

    ... of primary dysmenorrhoea amongst Abia State university medical students, South ... its impact on school and social activities and the students' management strategies. ... is high, and not consistently associated with demographic risk factors.

  11. Determination of Mucosal Secretory Factors that Influence ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Understanding the complex factors that can lead to HIV infection is crucial to addressing the problem among vulnerable ... Related content ... Policy in Focus publishes a special issue profiling evidence to empower women in the labour market.

  12. Home births in the Netherlands: midwifery-related factors of influence.

    NARCIS (Netherlands)

    Jabaaij, L.; Meijer, W.

    1996-01-01

    Objective: Identification of midwifery-related factors influencing the varied percentage of home births in the practices of Dutch midwives. Design: Cross-sectional study. Setting: Independent midwifery practices in the Netherlands. Participants: 115 independent midwives. Measurements: Recording of

  13. FACTORS INFLUENCING ADOPTION DECISIONS OF MAIZE FARMERS IN NIGERIA

    Directory of Open Access Journals (Sweden)

    Olusegun Ayodeji Fadare

    2014-07-01

    Full Text Available The needs to develop improved varieties of maize have been in the heart of various researchers and institutions in Nigeria because of its strategic role in tackling food insecurity and poverty. Despite substantial efforts to improve maize varieties, the level of adoption of improved maize varieties (IMV in Nigeria in still very low. Although previous adoption studies have indicated a number of socioeconomic and institutional/organizational variables as important factors influencing adoption of improved maize (crop varieties in the country, whether these factors are the main issues of concern, and whether the inclusion of regional/agro-ecological variables in adoption model are also important in explaining what could drive farmers’ adoption behaviour requires investigation. This study therefore examined factors influencing adoption of IMV among farmers in Nigeria using a selected portion of the Nigeria Living Standard Measurement Survey data collected by the National Bureau of Statistics and the World Bank for 2010/2011 cropping season with descriptive statistics and probit model as tools for data analysis. The results suggest, in line with some previous studies, that farm size, education level of farmers and access to extension services would significantly influence adoption of IMV. The results also indicate that farmers across the entire agro-ecological regions of country share some negative sentiments regarding adoption of IMV. Renewed emphasis on interventions that would enable farmers gain more access to farmland, and promote formal education and extension service are advocated. An attempt to incorporate variables that capture farmers’ perception/experience on agroclimatic/ ecologically related concerns in adoption study could aid better understand of what drives farmers’ adoption decisions across the country especially in the light of the emerging climate change issues and its implication on food production.

  14. Factors Influencing Organization Adoption Decision On Cloud Computing

    OpenAIRE

    Ailar Rahimli

    2013-01-01

    Cloud computing is a developing field, using by organization that require to computing resource to provide the organizational computing needs. The goal of this research is evaluate the factors that influence on organization decision to adopt the cloud computing in Malaysia. Factors that relate to cloud computing adoption that include : need for cloud computing, cost effectiveness, security effectiveness of cloud computing and reliability. This paper evaluated the factors that influence on ado...

  15. Factors influencing societal response of nanotechnology : an expert stakeholder analysis

    OpenAIRE

    Gupta, N.; Fischer, A.R.H.; Lans, van der, I.A.; Frewer, L.J.

    2012-01-01

    Nanotechnology can be described as an emerging technology and, as has been the case with other emerging technologies such as genetic modification, different socio-psychological factors will potentially influence societal responses to its development and application. These factors will play an important role in how nanotechnology is developed and commercialised. This article aims to identify expert opinion on factors influencing societal response to applications of nanotechnology. Structured i...

  16. Factors influencing societal response of nanotechnology: an expert stakeholder analysis

    OpenAIRE

    Gupta, Nidhi; Fischer, Arnout R. H.; van der Lans, Ivo A.; Frewer, Lynn J.

    2012-01-01

    Nanotechnology can be described as an emerging technology and, as has been the case with other emerging technologies such as genetic modification, different socio-psychological factors will potentially influence societal responses to its development and application. These factors will play an important role in how nanotechnology is developed and commercialised. This article aims to identify expert opinion on factors influencing societal response to applications of nanotechnology. Structured i...

  17. Additional factors influencing resident satisfaction and dissatisfaction

    Directory of Open Access Journals (Sweden)

    Jalal SR

    2017-11-01

    Full Text Available Seyed Ramin Jalal, Abdirahman Osman, Saeed Azizi  Faculty of Medicine, St George’s Hospital Medical School, London, UK We have read the recent review article by Kahn et al1 with great interest. The original article was detailed and informative, and we felt it would be helpful to expand on the factors affecting resident satisfaction and dissatisfaction. As senior medical students in clinical years, we spend a significant portion of our time shadowing specialist trainees. Thus, we can offer a unique perspective on the factors affecting trainee satisfaction and well-being. View the original paper by Kahn and colleagues. 

  18. Maternal sociodemographic factors that influence full child ...

    African Journals Online (AJOL)

    single parenting, inadequate antenatal care, ethnicity and negative belief in vaccination to low immunisation uptake around the ... the maternal sociodemographic factors that are associated with child ... mothers <18 years old (odds ratio (OR) 0.53; confidence interval (CI) 0.34 - 0.84) and mothers residing in the northern ...

  19. Factors Influencing Medical Students' Choice of Specialty

    Directory of Open Access Journals (Sweden)

    Pei-Yeh Chang

    2006-01-01

    Conclusion: This study found that personal intelligence/ability preference and career opportunities were more important factors to the current generation of students in choosing a specialty. Knowledge of these students' attitudes could form the basis for the development of strategies to enhance the attractiveness of specialties facing the problem of a shortage of manpower.

  20. 122 Factors Influencing Information and Communication Technology ...

    African Journals Online (AJOL)

    Yemi Olojede

    Women Research Scientists in Universities of Agriculture in Nigeria ... recommends that researchers should restructure their work schedule to accommodate ICT practice and use in order to enhance ICT use. Keywords: Factors of ICT ... potential to reduce poverty and improve livelihoods by empowering users with timely.

  1. Factors influencing adherence to routine iron supplementation ...

    African Journals Online (AJOL)

    Anemia in pregnancy is a common problem especially in developing countries. and has been linked with feotal and maternal complications. Taking iron supplements could reduce anaemia in pregnancy but some pregnant women do not adhere to this. The study identified some factors associated with non adherence ...

  2. Home Environmental Factors Influencing Performance and Progress ...

    African Journals Online (AJOL)

    Our findings support other studies which found that parents' educational level and income level have a bearing on school progress and performance. Contrary to most research findings mother tongue instruction did not eme1rge as an important explanatory factor on school progress and performance, however; home ...

  3. Biodemographic And Health Seeking Behavior Factors Influencing ...

    African Journals Online (AJOL)

    This study findings show primarily - amongst the biodemographic and health seeking services factors, delivery-related maternal health complicacies, blindness, higher order births, twin births, lower household size and interaction effect of higher order live births and male child are significantly correlated with higher neonatal ...

  4. Home Environmental Factors Influencing Performance and Progress ...

    African Journals Online (AJOL)

    2010-05-11

    May 11, 2010 ... internal factors for low school performance, this study focused on the learners ... Namibia. Although numerous studies have confinned socio-economic ... Many studies support the view that family background is the strongest single predictor of ..... Windhoek is clearly stratified, mainly following income levels.

  5. Environmental Factors Influencing Artisanal Fishing in Eastern ...

    African Journals Online (AJOL)

    user

    The study identified the environmental factors affecting artisanal fishing in. Eastern Obolo local government area of Akwa ... colonial administration (Anko &Eyo, 2003). According to Olomola (1998), artisanal ... The problems faced by artisanal fishers in Nigeria are not far from what is experienced by artisanal fishermen in ...

  6. Factors influencing restaurant worker perception of floor slipperiness.

    Science.gov (United States)

    Courtney, Theodore K; Huang, Yueng-Hsiang; Verma, Santosh K; Chang, Wen-Ruey; Li, Kai Way; Filiaggi, Alfred J

    2006-11-01

    Falls are responsible for a substantial injury burden in the global workplace. Restaurant environments are particularly challenged by slips, trips, and falls. This study explored those factors that could influence workers' self-reports of slipperiness in U.S. fast-food restaurants. One hundred and twenty-six workers employed in 10 fast-food restaurants in the northeastern United States participated in the study representing a study-wide response rate of 87.5%. Participants' ratings of floor slipperiness and occupational slip history within the past 4 weeks were collected through written questionnaire. Additional factors collected by questionnaire included age, gender, shift length, and shoe type. Shoe condition (wear) and shoe contamination were visually assessed by the investigators. Floor friction was also measured. Lower restaurant mean coefficient of friction and the presence of contamination on workers' shoe soles were environmental factors significantly associated with workers reporting more slippery conditions. A recent workplace history of slipping with or without a subsequent fall was also significantly associated with workers reporting more slippery conditions. Workers over the age of 45 reported conditions to be significantly less slippery than younger workers. The results suggest that worker ratings of slipperiness are influenced not only by the actual level of friction but also by the other individual and environmental factors noted above. Recommendations for future studies would include a longitudinal design to better capture the temporal sequence between these variables. More field research is needed to better understand the association between workplace conditions, worker perception of slipperiness, and slipping at work.

  7. Particulate pollution in ventilated space: Analysis of influencing factors

    International Nuclear Information System (INIS)

    Zhao Bin; Wu Jun

    2009-01-01

    Particle pollution has been identified to be a major indoor air pollution problem as many epidemiologic evidences have indicated that the particle exposure affects the occupant health. In common practice, mechanical ventilation is introduced to maintain a satisfactory indoor air quality for the occupant, which includes the area of particle control within the space. In order to have an effective control to the indoor particle pollution, it is important to understand the major factors influencing the indoor particle concentration in the breathing zone. This study employs a previously proposed approach to study the particle pollution in a typical ventilation system. The model simultaneously takes into account the interactions between particle transport in ventilation ducts and rooms and particle spatial distribution. It has been proven that an entire ventilation system, including filters, ducts and rooms, can be regarded as a serial of filters in steady-state cases, hence the name 'particle filter group model'. The particle concentration in the breathing zone is calculated under different conditions, and the result is then validated by experimental data. Based on the results, four main factors that affect the particle concentration in the breathing zone are identified, they are fresh air rate, particle filter efficiency, the type of the ventilation duct (roughness) and ventilation modes. Their degrees of influence are analyzed and then the possible measures to improve/control the indoor particle pollution are suggested

  8. [Quality of life and related influencing factors in Chinese adults].

    Science.gov (United States)

    Deng, Q; Wang, L M; Zhang, M

    2016-02-01

    To evaluate the quality of life (QOL) and influencing factors on Chinese adults. 83 666 subjects from 2010 Chronic Non-communicable Disease and Risk Factor Surveillance Project in China were included in this study. Questionnaire was used to collect information on general condition and health status. WHOQOL-BREF was adopted as an instrument to measure the QOL on all the subjects.t test was used to compare QOL from different groups. Multiple linear regression analysis was used to assess the association of QOL with BMI, by gender. Among all the 83 666 subjects, mean scores of physical,psychological, social relationship and environment domains appeared as (73.97 ± 13.84), (66.65 ± 14.21), (65.76 ± 14.08) and (56.59 ± 15.15), respectively. Age, residential areas (urban/rural), education levels and marital status all showed significant impact on scores of the four domains (Peducation level (Peducation levels, marital status and chronic diseases could significantly influence the QOL of Chinese adults.

  9. Multiple Factors Influence Glomerular Albumin Permeability in Rats

    Science.gov (United States)

    Sandoval, Ruben M.; Wagner, Mark C.; Patel, Monica; Campos-Bilderback, Silvia B.; Rhodes, George J.; Wang, Exing; Wean, Sarah E.; Clendenon, Sherry S.

    2012-01-01

    Different laboratories recently reported incongruous results describing the quantification of albumin filtration using two-photon microscopy. We investigated the factors that influence the glomerular sieving coefficient for albumin (GSCA) in an effort to explain these discordant reports and to develop standard operating procedures for determining GSCA. Multiple factors influenced GSCA, including the kidney depth of image acquisition (10–20 μm was appropriate), the selection of fluorophore (probes emitting longer wavelengths were superior), the selection of plasma regions for fluorescence measurements, the size and molecular dispersion characteristics of dextran polymers if used, dietary status, and the genetic strain of rat. Fasting reduced the GSCA in Simonsen Munich Wistar rats from 0.035±0.005 to 0.016±0.004 (Palbumin transcytosis with vesicular and tubular delivery to and fusion with the basolateral membrane in S1 proximal tubule cells. In summary, these results help explain the previously conflicting microscopy and micropuncture data describing albumin filtration and highlight the dynamic nature of glomerular albumin permeability. PMID:22223875

  10. Factors influencing bacterial adhesion to contact lenses

    OpenAIRE

    Dutta, Debarun; Cole, Nerida; Willcox, Mark

    2012-01-01

    The process of any contact lens related keratitis generally starts with the adhesion of opportunistic pathogens to contact lens surface. This article focuses on identifying the factors which have been reported to affect bacterial adhesion to contact lenses. Adhesion to lenses differs between various genera/species/strains of bacteria. Pseudomonas aeruginosa, which is the predominant causative organism, adheres in the highest numbers to both hydrogel and silicone hydrogel lenses in vitro. The ...

  11. Nutritional factors influencing milk urea in buffaloes

    Directory of Open Access Journals (Sweden)

    V. Proto

    2011-03-01

    Full Text Available Urea is the primary form in which N is excreted in ruminants. Milk urea (MU content was introduced as a means to monitor the efficiency of protein utilisation in dairy cattle (Baker et al., 1995; Roseler et al., 1993; Bertoni, 1995. In this study the effect of some nutrition factors on MU content in buffalo herds was analysed in order to examine the possibility that protein nutrition could be monitored by means of milk urea at herd level........

  12. Factors influencing eating attitudes in secondary-school girls in ...

    African Journals Online (AJOL)

    Family, especially maternal, factors play a role in determining eating attitudes. Peer and media (television) factors are not significantly influential. The findings provide preliminary data on factors that influence eating attrtudes in a group at risk for the development of eating disorders. The findings have implications for the ...

  13. Factors Influencing Stormwater Mitigation in Permeable Pavement

    Directory of Open Access Journals (Sweden)

    Chun Yan Liu

    2017-12-01

    Full Text Available Permeable pavement (PP is used worldwide to mitigate surface runoff in urban areas. Various studies have examined the factors governing the hydrologic performance of PP. However, relatively little is known about the relative importance of these governing factors and the long-term hydrologic performance of PP. This study applied numerical models—calibrated and validated using existing experimental results—to simulate hundreds of event-based and two long-term rainfall scenarios for two designs of PP. Based on the event-based simulation results, rainfall intensity, rainfall volume, thickness of the storage layer and the hydraulic conductivity of the subgrade were identified as the most influential factors in PP runoff reduction. Over the long term, PP performed significantly better in a relatively drier climate (e.g., New York, reducing nearly 90% of runoff volume compared to 70% in a relatively wetter climate (e.g., Hong Kong. The two designs of PP examined performed differently, and the difference was more apparent in the relatively wetter climate. This study generated insights that will help the design and implementation of PP to mitigate stormwater worldwide.

  14. An investigation on factors influencing on human resources productivity

    Directory of Open Access Journals (Sweden)

    Masoumeh Seifi Divkolaii

    2014-05-01

    Full Text Available Human resources development is one of the most important components of any organization and detecting important factors influencing on human resources management plays essential role on the success of the firms. In this paper, we present an empirical investigation to determine different factors influencing productivity of human resources of Islamic Republic of Iran Broadcasting (IRIB in province of Mazandaran, Iran. The study uses analytical hierarchy process (AHP to rank 17 important factors and determines that personal characteristics were the most important factors followed by management related factors and environmental factors. In terms of personal characteristics, job satisfaction plays essential role on human resources development. In terms of managerial factors, paying attention on continuous job improvement by receiving appropriate training is the most important factor followed by welfare facilities for employees and using a system of reward/punishment in organization. Finally, in terms of environmental factors, occupational safety is number one priority followed by organizational rules and regulations.

  15. INFLUENCE FACTORS AND MANIFESTATIONS OF PRODUCTIVITY

    Directory of Open Access Journals (Sweden)

    Daniel DĂNECI-PĂTRĂU

    2014-09-01

    Full Text Available Notion almost unknown before 1950, labor productivity is now commonly used by economists, engineers, sociologists and politicians alike, influencing all the important issues of the time. Under these circumstances, if it is accepted that labor productivity is the driving variable that generates economic progress, it is justified that people need to increase their efforts to enhance, its value through various means. This article presents the findings of a theoretical research literature regarding landmarks in the evolution of labor productivity. Arguments justifying such an approach have been given by the fact that the labor issue presents an interest not only at the micro level, individual (the consequences it has on the individual work, but also at the macro level, societal (employment relations on the market labor, insurance systems and the offer educational services on the market today.

  16. Factors influencing radon attenuation by tailing covers

    International Nuclear Information System (INIS)

    Silker, W.B.; Rogers, V.C.

    1981-07-01

    The US NRC, in its Generic Environmental Impact Statement on uranium milling has specified that the radon flux escaping a uranium mill tailings pile will be reduced to pCi/m 2 s by application of covering layers of soils and clays. These covers present a radon diffusion barrier, which sufficiently increases the time required for radon passage from the tailings to the atmosphere to allow for decay of 222 Rn within the cover. The depth of cover necessary to reduce the escaping radon flux to the prescribed level is to be determined by calculation, and requires precise knowledge of the radon diffusion coefficient in the covering media. A Radon Attenuation Test Facility was developed to determine rates of radon diffusion through candidate cover materials. This paper describes this facility and its application for determining the influence of physical properties of the soil column on the radon diffusion coefficient

  17. Factors influencing incident reporting in surgical care.

    Science.gov (United States)

    Kreckler, S; Catchpole, K; McCulloch, P; Handa, A

    2009-04-01

    To evaluate the process of incident reporting in a surgical setting. In particular: the influence of event outcome on reporting behaviour; staff perception of surgical complications as reportable events. Anonymous web-based questionnaire survey. General Surgical Department in a UK teaching hospital. Of 203 eligible staff, 55 (76.4%) doctors and 82 (62.6%) nurses participated. Knowledge and use of local reporting system; propensity to report incidents which vary by outcome (harm, no harm, harm prevented); propensity to report surgical complications; practical and psychological barriers to reporting. Nurses were significantly more likely to know of the local reporting system and to have recently completed a report than doctors. The level of harm (F(1.8,246) = 254.2, pvs 53%, z = 4.633, psystems.

  18. Factors influencing workplace health promotion intervention: a qualitative systematic review.

    Science.gov (United States)

    Rojatz, Daniela; Merchant, Almas; Nitsch, Martina

    2017-10-01

    Although workplace health promotion (WHP) has evolved over the last 40 years, systematically collected knowledge on factors influencing the functioning of WHP is scarce. Therefore, a qualitative systematic literature review was carried out to systematically identify and synthesize factors influencing the phases of WHP interventions: needs assessment, planning, implementation and evaluation. Research evidence was identified by searching electronic databases (Scopus, PubMed, Social Sciences Citation Index, ASSIA, ERIC, IBBS and PsycINFO) from 1998 to 2013, as well as by cross-checking reference lists of included peer-reviewed articles. The inclusion criteria were: original empirical research, description of WHP, description of barriers to and/or facilitators of the planning, implementation and/or evaluation of WHP. Finally, 54 full texts were included. From these, influencing factors were extracted and summarized using thematic analysis. The majority of influencing factors referred to the implementation phase, few dealt with planning and/or evaluation and none with needs assessment. The influencing factors were condensed into topics with respect to factors at contextual level (e.g. economic crisis); factors at organizational level (e.g. management support); factors at intervention level (e.g. quality of intervention concept); factors at implementer level (e.g. resources); factors at participant level (e.g. commitment to intervention) and factors referring to methodological and data aspects (e.g. data-collection issues). Factors regarding contextual issues and organizational aspects were identified across three phases. Therefore, future research and practice should consider not only the influencing factors at different levels, but also at different phases of WHP interventions. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  19. Influence factors on etching rate of PET nuclear pore membrane

    International Nuclear Information System (INIS)

    Zuo Zhenzhong; Wu Zhendong; Liang Haiying; Ju Wei; Chen Dongfeng; Fu Yuanyong; Qu Guopu

    2014-01-01

    Background: The nuclear pore membrane is a kind of liquid filtration material manufactured by irradiation and chemical etching. Various conditions in etch process have a great influence on etch rate. Purpose: The influence factors of concentration and temperature of etch solution and the irradiation energy of heavy ions on etch rate was studied. Methods: Four layers of PET (polyethylene terephthalate) films were stacked together and were irradiated with 140-MeV 32 S ions at room temperature under vacuum conditions. Utilizing conductivity measurement technique, the electrical current changes through the u:radiated PET film were monitored during etching, from which the breakthrough time and therefore the track etching rate was calculated. Results: The results show that there is an exponential correlation between etch rate and temperature, and a linear correlation between etch rate and concentration. The track etching rate increases linearly with energy loss rate. Empirical formula for the bulk etching rate as a function of etchant concentration and temperature was also established via fitting of measurements. Conclusion: It is concluded that by using 1.6-MeV·u -1 32 S ions, PET nuclear pore membrane with cylindrical pore shape can be prepared at 85℃ with etchant concentration of l mol·L -1 . (authors)

  20. Factors that influence current tuberculosis epidemiology.

    Science.gov (United States)

    Millet, Juan-Pablo; Moreno, Antonio; Fina, Laia; del Baño, Lucía; Orcau, Angels; de Olalla, Patricia García; Caylà, Joan A

    2013-06-01

    According to WHO estimates, in 2010 there were 8.8 million new cases of tuberculosis (TB) and 1.5 million deaths. TB has been classically associated with poverty, overcrowding and malnutrition. Low income countries and deprived areas, within big cities in developed countries, present the highest TB incidences and TB mortality rates. These are the settings where immigration, important social inequalities, HIV infection and drug or alcohol abuse may coexist, all factors strongly associated with TB. In spite of the political, economical, research and community efforts, TB remains a major global health problem worldwide. Moreover, in this new century, new challenges such as multidrug-resistance extension, migration to big cities and the new treatments with anti-tumour necrosis alpha factor for inflammatory diseases have emerged and threaten the decreasing trend in the global number of TB cases in the last years. We must also be aware about the impact that smoking and diabetes pandemics may be having on the incidence of TB. The existence of a good TB Prevention and Control Program is essential to fight against TB. The coordination among clinicians, microbiologists, epidemiologists and others, and the link between surveillance, control and research should always be a priority for a TB Program. Each city and country should define their needs according to the epidemiological situation. Local TB control programs will have to adapt to any new challenge that arises in order to respond to the needs of their population.

  1. Factors influencing microinjection molding replication quality

    Science.gov (United States)

    Vera, Julie; Brulez, Anne-Catherine; Contraires, Elise; Larochette, Mathieu; Trannoy-Orban, Nathalie; Pignon, Maxime; Mauclair, Cyril; Valette, Stéphane; Benayoun, Stéphane

    2018-01-01

    In recent years, there has been increased interest in producing and providing high-precision plastic parts that can be manufactured by microinjection molding: gears, pumps, optical grating elements, and so on. For all of these applications, the replication quality is essential. This study has two goals: (1) fabrication of high-precision parts using the conventional injection molding machine; (2) identification of robust parameters that ensure production quality. Thus, different technological solutions have been used: cavity vacuuming and the use of a mold coated with DLC or CrN deposits. AFM and SEM analyses were carried out to characterize the replication profile. The replication quality was studied in terms of the process parameters, coated and uncoated molds and crystallinity of the polymer. Specific studies were processed to quantify the replicability of injection molded parts (ABS, PC and PP). Analysis of the Taguchi experimental designs permits prioritization of the impact of each parameter on the replication quality. A discussion taking into account these new parameters and the thermal and spreading properties on the coatings is proposed. It appeared that, in general, increasing the mold temperature improves the molten polymer fill in submicron features except for the steel insert (for which the presence of a vacuum is the most important factor). Moreover, the DLC coating was the best coating to increase the quality of the replication. This result could be explained by the lower thermal diffusivity of this coating. We noted that the viscosity of the polymers is not a primordial factor of the replication quality.

  2. High mechanical Q-factor measurements on silicon bulk material

    Energy Technology Data Exchange (ETDEWEB)

    Schwarz, Christian; Nawrodt, Ronny; Heinert, Daniel; Schroeter, Anja; Neubert, Ralf; Thuerk, Matthias; Vodel, Wolfgang; Seidel, Paul [Institut fuer Festkoerperphysik, Helmholtzweg 5, D-07743 Jena (Germany); Tuennermann, Andreas [Institut fuer Angewandte Physik, Albert-Einstein-Strasse 15, D-07745 Jena (Germany)

    2008-07-01

    The direct observation of gravitational waves is one of the biggest challenges in science. Current detectors are limited by different kinds of noise. One of the fundamental noise sources is thermal noise arising from the optical components. One of the most promising attempts to reduce the thermal noise contribution in future detectors will be the use of high Q-factor materials at cryogenic temperatures. Silicon seems to be the most interesting material due to its excellent optical and thermal properties. We present high Q-factor measurements on bulk samples of high purity silicon in a temperature range from 5 to 300 K. The sample dimensions vary between 76.2 mm x 12..75 mm. The Q-factor exceeds 4.10{sup 8} at 6 K. The influence of the crystal orientation, doping and the sample preparation on the Q-factor is discussed.

  3. Influence of socioeconomic factors in muscle dysmorphia

    Directory of Open Access Journals (Sweden)

    Mercedes Rizo-Baeza

    2018-05-01

    Full Text Available Abstract: Introduction and objective: In muscle dysmorphia (MD the patient thinks he is smaller and less muscular than he really is. As in other addictive diseases, its prevention and early diagnosis are the key to avoid associated disorders. It is established as an objective to determine if there are associated socio-demographic factors. Material and methods: Cross-sectional observational study of 140 men, between 16-45 years old, who practice bodybuilding in gyms of different socioeconomic levels, at least 6 months prior to the study, 4 days / week, 1 hour / day, who signed the informed consent and without chronic illness. The main variable was the presence of symptoms of DM using the muscle appearance satisfaction scale (44 patients and the secondary variables were age, coexistence, children, educational level and monthly income. Frequencies were used in the qualitative variables, and averages and standard deviations in the quantitative variables, in the bivariate analysis of the Chisquare test and the t-student test respectively and the binary logistic regression (presence / absence of MD to eliminate confounding factors, the probabilities were calculated associated Results: The gymnasts have an average age of 26.1 (SD = 7.1 years; the majority live with their parents (56.4%; they do not have children (89.3%; the academic levels are balanced and the economic income is mostly low / medium (79.3%. In the bivariate analysis, is observed a higher risk at a younger age (p = 0.027 and when they live with their parents (limit of significance. Significance is not observed with the variables having children, educational level or economic income. In the binary logistic regression these meanings are lost, although the graphic representation of the probability in relation with age seems to be a risk factor, as well as living with the parents or as a couple. Conclusion: Among men who practice bodybuilding, it is usually a risk to suffer MD, to be younger

  4. FACTORS THAT INFLUENCE THE INTENTION FOR

    Directory of Open Access Journals (Sweden)

    NICULIȚĂ ZENOBIA

    2015-10-01

    Full Text Available The present article presents the research results of an applied study regarding the impact of work style and organizational climate on teachers' intention to leave their workplace in the foreseeable future. A sample of 150 teachers aged 21-56, employees of 10 schools from Bucharest, Romania has been the focus of the research, aiming to identify the differences between the group of participants that expressed their intent to leave the organization (called the turnover group and the ones that stated their intention to remain employed in the school (non-fluctuation group regarding work style and its factors and the perceived traits of the organizational climate for the schools employing them at the time of the study. Teachers included in the turnover group revealed a more dynamic work style and a significantly more negative perception of the organizational climate.

  5. Factors influencing dependence on mobile phone

    Directory of Open Access Journals (Sweden)

    Mohammad-Hossein Biglu

    2016-08-01

    Full Text Available Introduction: The purpose of current study was to investigate the relationship between the problematic use of mobile phone and Big Five personality traits among students of Tabriz University of Medical Sciences in Tabriz, Iran. Methods: A total number of 120 students (80 females and 40 males were selected by applying proportional randomized classification sampling method from Tabriz University of Medical Sciences. The Mobile Phone Problematic Use Scale (MPPUS and demographic questionnaire were used to gather data. Data were analyzed using SPSS software. Results: Analysis of gathered data showed that gender, neuroticism, extraversion, and openness to experience had positive correlation with the problematic use of mobile phone, whereas conscientiousness and agreeableness were not correlated with the problematic use of mobile phone. Conclusion: The evaluation of Big Five personality traits would be a reliable factor for predicting the problematic use of mobile phone among students.

  6. Wheat Industry: Which Factors Influence Innovation?

    Directory of Open Access Journals (Sweden)

    Vitor Francisco Dalla Corte

    2015-10-01

    Full Text Available A change in the profile of food consumption is occurring because of the new context of demographic growth, the increase of income in developing economies, and urbanization. In Brazil, consumption patterns have trended from fresh to processed food and internal and external growth in demand has led to opportunities that require new and higher levels of technological innovation and associated managerial skill. The aim of this study was to evaluate the role of innovation on a key Brazilian food industry: wheat product markets. Results showed that while most firms did not innovate in the past year, new investments in R&D were important for innovation to occur compared to other factors such as the size of the company, the integration in supply chain, and the age of the company. These results demonstrate that innovation is not a random or unpredictable process, but a complex and diverse process that may be specific to each industry.

  7. Influence factors in the Knowledge Management

    Directory of Open Access Journals (Sweden)

    Antonio Sánchez Ramírez

    2010-05-01

    Full Text Available There are factors which impel or slow down the knowledge processes into the organizations which in turn affect the completion of its vision as an ideal planning. The organizational memory, repetition of unconscious acts and the extended practice plays an important role in the meaning of the action and the goal to transform the plans into attainment through the manifest knowledge which turns into conclusion and makes a systematic knowing infused with values as an important core source for the firm. They conceive maturity stages of development within the companies which interact mutually, starting with the organizational memory which embodies the past and present successes, passing towards unconscious acts which can risk the true knowledge content to an extended practice stage based in years of experience.

  8. Factors influencing message dissemination through social media

    Science.gov (United States)

    Zheng, Zeyu; Yang, Huancheng; Fu, Yang; Fu, Dianzheng; Podobnik, Boris; Stanley, H. Eugene

    2018-06-01

    Online social networks strongly impact our daily lives. An internet user (a "Netizen") wants messages to be efficiently disseminated. The susceptible-infected-recovered (SIR) dissemination model is the traditional tool for exploring the spreading mechanism of information diffusion. We here test our SIR-based dissemination model on open and real-world data collected from Twitter. We locate and identify phase transitions in the message dissemination process. We find that message content is a stronger factor than the popularity of the sender. We also find that the probability that a message will be forwarded has a threshold that affects its ability to spread, and when the probability is above the threshold the message quickly achieves mass dissemination.

  9. Influence of processing factors over concrete strength.

    Science.gov (United States)

    Kara, K. A.; Dolzhenko, A. V.; Zharikov, I. S.

    2018-03-01

    Construction of facilities of cast in-situ reinforced concrete poses additional requirements to quality of material, peculiarities of the construction process may sometimes lead to appearance of lamination planes and inhomogeneity of concrete, which reduce strength of the material and structure as a whole. Technology compliance while working with cast in-situ concrete has a significant impact onto the concrete strength. Such process factors as concrete curing, vibration and compaction of the concrete mixture, temperature treatment, etc., when they are countered or inadequately followed lead to a significant reduction in concrete strength. Here, the authors experimentally quantitatively determine the loss of strength in in-situ cast concrete structures due to inadequate following of process requirements, in comparison with full compliance.

  10. Factors influencing professional life satisfaction among neurologists.

    Science.gov (United States)

    Teixeira-Poit, Stephanie M; Halpern, Michael T; Kane, Heather L; Keating, Michael; Olmsted, Murrey

    2017-06-19

    Predicted shortages in the supply of neurologists may limit patients' access to and quality of care for neurological disorders. Retaining neurologists already in practice provides one opportunity to support the overall supply of practicing neurologists. Understanding factors associated with professional life satisfaction (and dissatisfaction) and implementing policies to enhance satisfaction may encourage neurologists to remain in clinical practice. In this paper, we present results from the first study examining factors associated with professional life satisfaction among a large sample of U.S, neurologists. We collaborated with the AAN to survey a sample of U.S. neurologists about their professional life satisfaction. Analyses examined the association of physician and practice characteristics with aspects of professional life satisfaction, including satisfaction with their career in medicine, medical specialty, current position, relationship with colleagues, relationship with patients, work/life balance, and pay. The study population consisted of 625 neurologists. In multivariate regression analyses, no single group or population stratum indicated high (or low) responses to all aspects of satisfaction. Older neurologists reported higher satisfaction with career, specialty, and relationship with patients than younger neurologists. Female neurologists had significantly lower satisfaction with pay than male neurologists. Neurologists who spent more time in research and teaching had greater satisfaction with specialty, relationship with colleagues, and relationship with patients than those spending no time in research. Neurologists who practiced in small cities/rural areas reported lower satisfaction across multiple dimensions than those practicing in large urban areas. Neurologists in solo practice had greater satisfaction with the relationship with their patients, but lower satisfaction with pay. Satisfaction is a multidimensional construct that is associated with

  11. Factors influencing groundwater quality: towards an integrated management approach.

    Science.gov (United States)

    De Giglio, O; Quaranta, A; Barbuti, G; Napoli, C; Caggiano, G; Montagna, M T

    2015-01-01

    The safety of groundwater resources is a serious issue, particularly when these resources are the main source of water for drinking, irrigation and industrial use in coastal areas. In Italy, 85% of the water used by the public is of underground origin. The aim of this report is to analyze the main factors that make groundwater vulnerable. Soil characteristics and filtration capacity can promote or hinder the diffusion of environmental contaminants. Global climate change influences the prevalence and degree of groundwater contamination. Anthropic pressure causes considerable exploitation of water resources, leading to reduced water availability and the progressive deterioration of water quality. Management of water quality will require a multidisciplinary, dynamic and practical approach focused on identifying the measures necessary to reduce contamination and mitigate the risks associated with the use of contaminated water resources.

  12. A study on packaging factors influencing on export development

    Directory of Open Access Journals (Sweden)

    Mina Mohammadi

    2014-10-01

    Full Text Available Packaging is an important instrument of commerce and trade in the world, it plays essential role in increasing sales and export and thus it maximizes profits generated in enterprises. Hence, the appropriate packaging for the producer generates necessary incentives for production, partly preserves them against zany opponents, and finally provides the customer with much more variety and choosing the right products. Packaging in fact, is a major contributor to the performance of customer relationship management. This survey determines five packaging factors influencing on export development including communications, infrastructure, awareness, design and technical extraction. Through the implementation of principal component analysis, the effective role of packaging components on exports is measured. Exploratory research model indicates that all five packing components were effective in export development of food industry.

  13. Factors influencing job satisfaction of oncology nurses over time.

    Science.gov (United States)

    Cummings, Greta; Olson, Karin; Raymond-Seniuk, Christy; Lo, Eliza; Masaoud, Elmabrok; Bakker, Debra; Fitch, Margaret; Green, Esther; Butler, Lorna; Conlon, Michael

    2013-01-01

    In this study, we tested a structural equation model to examine work environment factors related to changes in job satisfaction of oncology nurses between 2004 and 2006. Relational leadership and good physician/nurse relationships consistently influenced perceptions of enough RNs to provide quality care, and freedom to make patient care decisions, which, in turn, directly influenced nurses' job satisfaction over time. Supervisor support in resolving conflict and the ability to influence patient care outcomes were significant influences on job satisfaction in 2004, whereas, in 2006, a clear philosophy of nursing had a greater significant influence. Several factors that influence job satisfaction of oncology nurses in Canada have changed over time, which may reflect changes in work environments and work life. These findings suggest opportunities to modify work conditions that could improve nurses' job satisfaction and work life.

  14. Fish consumption preferences and factors influencing it

    Directory of Open Access Journals (Sweden)

    Mehmet Ferit Can

    2015-06-01

    Full Text Available Fish consumption preferences are affected by individuals’ socioeconomic characteristics. The aims of the present paper were (i to obtain information on fish consumption level and frequency; (ii to investigate the associations between the socioeconomic characteristics of consumers and their preferences; and (iii to examine the influence of determinants on fish consumption. Data were gathered through a questionnaire completed by a total of 127 randomly selected individuals from different socioeconomic backgrounds from the Antakya, Turkey. The average consumption was found to be 2.98 kg/person/year for fish. Anchovies, gilt-head sea bream, and sea bass were reported as the most consumed three species, respectively. Significant differences in fish consumption were found among age groups, gender groups, and education groups, as well as between marital statuses. A majority of the consumers eat fish once a month throughout the year or only during the winter months. Fish consumption level and frequency were significantly positively correlated with education (p<0.01, income (p<0.05 and total meat consumption (p<0.01. The stepwise multiple regression model explained 41.7% (p<0.01 of the total variance for fish consumption. The amount and frequency of the consumption in the region, which is very far below the world and Turkey average especially for lower socioeconomic groups and for less-consumed fish species, can be increased by certain policies, such as training, advertising and different marketing strategies. Moreover, consumption should be distributed equally throughout the year instead of consuming only in certain seasons.

  15. Assessing the Factors Influencing Women Attainment of Household ...

    African Journals Online (AJOL)

    This study assessed the factors influencing the attainment of household food security in Ikwuano ... Data analysis utilized descriptive statistics such as frequency counts, ... had no access to credits, 71.7% had no contact with extension service.

  16. The Influence of Psychological Factors in Meniere's Disease | Orji ...

    African Journals Online (AJOL)

    The Influence of Psychological Factors in Meniere's Disease. ... Annals of Medical and Health Sciences Research ... probably through disorders of the autonomic nervous system occasioned by the increased levels of stress‑related hormones.

  17. Influence of bioregion and environmental factors on the growth, size ...

    African Journals Online (AJOL)

    The influence of bioregion and important environmental factors in South Africa ... the production efficiency of cows through the implementation of management ... genetic component was not separated from the environmental components.

  18. Factors influencing recruitment and retention of professional nurses ...

    African Journals Online (AJOL)

    J. Lyn Haskins

    factors influencing recruitment and retention of three categories of HPs in KwaZulu-Natal and has ...... tion, with good career opportunities which were similar in both urban and rural .... attract nurses to rural areas: A multicountry discrete choice.

  19. Factors that influence doctors in the assessment of applicants for ...

    African Journals Online (AJOL)

    Factors that influence doctors in the assessment of applicants for disability grant. ... and the usefulness of the committees were important in decision making. ... assessment of applicants for a disability grant is a subjective and emotional task.

  20. Evaluation of some genetic factors influencing the phenotypic ...

    African Journals Online (AJOL)

    Evaluation of some genetic factors influencing the phenotypic severity of β thalassemia Egyptian patients. Ibtessam R Hussein, Amina M Medhat, Samir F Zohny, Alice K Abd El-Aleem, Ghada Y El-Kammah, Bardees M Foda ...

  1. Social Cultural Factors Influencing Women's Participation in Sports ...

    African Journals Online (AJOL)

    Social Cultural Factors Influencing Women's Participation in Sports as Perceived by Female Students of the University of Ilorin. ... sports competition while mass media should organize enlightenment programmes that will mitigate the ...

  2. Physico-chemical and biotic factors influencing microalgal seed ...

    African Journals Online (AJOL)

    Physico-chemical and biotic factors influencing microalgal seed culture propagation for inoculation of a ... African Journal of Biotechnology ... used to inoculate an open raceway pond for large scale biomass production for biodiesel production.

  3. Factors Influencing the Willingness to Pay User Fees

    OpenAIRE

    Morse, George W.

    2012-01-01

    In this Note I explore the factors which influence the demand side of program participation, or the willingness to pay (WTP). The WTP estimates can help you determine how many people will participate in an event at each fee level.

  4. Factors influencing adherence to dietary guidelines: a qualitative ...

    African Journals Online (AJOL)

    2014-01-17

    Jan 17, 2014 ... Original Research: Factors influencing adherence to dietary guidelines. 76. 2014 Volume ..... eat, because they dik (tired) of giving you special food. Then they go .... patients in this study were satisfied with the advice received ...

  5. 38 FACTORS THAT INFLUENCE IRON STATUS OF PREGNANT ...

    African Journals Online (AJOL)

    sys01

    The study investigated the factors that influence iron ... approaches employed for promotion of girl-child education and prevention of adolescent .... purchase food items rich in haem iron such as ... decision making, life style options, and control.

  6. factors influencing the choice of health care providing facility among

    African Journals Online (AJOL)

    In the public sector ... Objectives: This study aimed to assess the factors influencing choice and satisfaction with health service providers among local ... the consumer of healthcare services cannot control. ..... Acquisition of Stable Food.

  7. Factors influencing the adoption of smartphones by undergraduate ...

    African Journals Online (AJOL)

    Factors influencing the adoption of smartphones by undergraduate students at ... ha ve thus far c oncentrated on the adoption of mobile technologies especially ... who may also want to explore the implementation of mobile learning systems, ...

  8. Socio-Cultural Factors Influencing Consent For Research In Nigeria ...

    African Journals Online (AJOL)

    Socio-Cultural Factors Influencing Consent For Research In Nigeria: Lessons ... for Health Research Ethics in enforcing researchers' compliance with ethical standards in ... Genuine respect for human dignity requires deeper understanding of ...

  9. Assessment of the prevalence and factors influencing adherence to ...

    African Journals Online (AJOL)

    admin

    adherence to exclusive breast feeding among HIV positive ... Despite its benefits, the practice of EBF among HIV positive mothers is low in Ethiopia. Objective: This study is intended to assess factors influencing adherence to exclusively breast ...

  10. Factors influencing breastfeeding practices in Edo state, Nigeria ...

    African Journals Online (AJOL)

    In Nigeria however, young infants may not benefit from such a practice as a ... The purpose of this study was to determine factors influencing breastfeeding practices in Edo State, Nigeria. ... Only 20 per cent practiced exclusive breastfeeding.

  11. Factors Influencing Student Nurses' Performance in the Final ...

    African Journals Online (AJOL)

    Factors Influencing Student Nurses' Performance in the Final Practical Examination ... Staff development courses can be held to coordinate the work of the school ... to authentic individual nursing care of patients so that they use the individual ...

  12. Factors influencing perceived sustainability of Dutch community health programs

    NARCIS (Netherlands)

    Vermeer, A. J. M.; van Assema, P.; Hesdahl, B.; Harting, J.; de Vries, N. K.

    2015-01-01

    We assessed the perceived sustainability of community health programs organized by local intersectoral coalitions, as well as the factors that collaborating partners think might influence sustainability. Semi-structured interviews were conducted among 31 collaborating partners of 5 community health

  13. Chapter 4. Radioactivity of waters and factors influencing its value

    International Nuclear Information System (INIS)

    Toelgyessy, J.; Harangozo, M.

    2000-01-01

    This is a chapter of textbook of radioecology for university students. In this chapter authors deal with radioactivity of waters and factors influencing its value. Chapter consists of next parts: (1) Natural radioactivity of hydrosphere; (2) Radioactive contamination of hydrosphere

  14. Factors influencing the teaching of physical education and sport in ...

    African Journals Online (AJOL)

    Factors influencing the teaching of physical education and sport in Cluster H Shools ... and nine heads of schools selected using the random sampling technique. ... the participation of children with disabilities in Physical Education and Sports.

  15. Factors influencing the density of aerobic granular sludge.

    NARCIS (Netherlands)

    Winkler, M.K.; Kleerebezem, R.; Strous, M.; Chandran, K.; Loosdrecht, M.C. van

    2013-01-01

    In the present study, the factors influencing density of granular sludge particles were evaluated. Granules consist of microbes, precipitates and of extracellular polymeric substance. The volume fractions of the bacterial layers were experimentally estimated by fluorescent in situ hybridisation

  16. Factors influencing Nigerian men's decision to undergo prostate ...

    African Journals Online (AJOL)

    Objective: This study explores the factors that influence a group of Nigerian men's decision to go for Prostate Specific ..... older they were in the habit of regularly visiting the hospi- .... friends with prostate cancer was an important stimulus.

  17. Factors influencing condom use among Nigerian undergraduates: A ...

    African Journals Online (AJOL)

    Factors influencing condom use among Nigerian undergraduates: A mixed method study. ... PROMOTING ACCESS TO AFRICAN RESEARCH ... group discussions) and quantitative (cross-sectional survey) methods were utilised for this study.

  18. Methodology for studying of influence of fire factor on geosystems

    Directory of Open Access Journals (Sweden)

    Yuriy Vasilovyth Buts

    2013-07-01

    Full Text Available Materials about the impact of emergency situations of the technogenic and natural character, caused by fires, on geosystems are presented. Methodological features of researches on fire factor influence on geosystem components are shown.

  19. E-commerce factors influencing consumers‘ online shopping decision

    OpenAIRE

    Baubonienė, Živilė; Gulevičiūtė, Gintarė

    2015-01-01

    Purpose – The purpose of this paper is to look at the factors driving online shopping and to develop an understanding of the factors influencing the online shopping by the consumers. This is done by exploring the factors that encourage consumers to shop online through analysis of such advantages as security, fast delivery, comparable price, convenience, cheaper prices and a wider choice. At the same time, the research project reveals the factors that are discouraging for consumers and the ben...

  20. Measurements of brain-derived neurotrophic factor

    DEFF Research Database (Denmark)

    Trajkovska, Viktorija; Klein, Anders Bue; Vinberg, Maj

    2007-01-01

    Although numerous studies have dealt with changes in blood brain-derived neurotrophic factor (BDNF), methodological issues about BDNF measurements have only been incompletely resolved. We validated BDNF ELISA with respect to accuracy, reproducibility and the effect of storage and repeated freezing...... (18.6+/-1.3 ng/ml versus 16.5+/-1.4 ng/ml), and showed a right-skewed BDNF concentration distribution. No association between whole blood BDNF concentrations and thrombocyte count, age, or BDNF genotype was found. In conclusion, the BDNF ELISA assay determines whole blood BDNF accurately and with high...

  1. Factors influencing the intention to watch online video advertising.

    Science.gov (United States)

    Lee, Joonghwa; Lee, Mira

    2011-10-01

    This study examines the factors influencing consumer intention to watch online video ads, by applying the theory of reasoned action. The attitude toward watching online video ads, the subjective norm, and prior frequency of watching online video ads positively influence the intention to watch online video ads. Further, beliefs held about entertainment and information outcomes from watching online video ads and subjective norm influence attitude toward watching these ads.

  2. Factors Influencing American Plastic Surgery Residents Toward an Academic Career.

    Science.gov (United States)

    Chetta, Matthew D; Sugg, Kristoffer B; Diaz-Garcia, Rafael J; Kasten, Steven J

    2018-02-01

    Plastic surgery residency program directors have an interest in recruiting applicants who show an interest in an academic practice. Medical school achievements (ie, United States Medical Licensing Examination® scores, publications, and Alpha Omega Alpha status) are metrics assessed to grade applicants but may not correlate with ultimately choosing an academic career. This study was designed to investigate factors influencing residents' choices for or against academic careers. A 25-item online questionnaire was designed to measure baseline interest in academic plastic surgery and factors that influence decisions to continue on or abandon that career path. This questionnaire was disseminated to the integrated/combined plastic surgery residents during the 2013 to 2014 academic year. One hundred twenty-five respondents indicated that they were currently interested in pursuing academic practice (n = 78) or had lost interest in academic practice (n = 47). Among all respondents, 92.8% (n = 116) stated they were interested in academic careers at the time of residency application, but one-third (n = 41) subsequently lost interest. Those residents who retained interest in academic careers indicated resident/medical student educational opportunities (57%) and complexity of patients (52%) as reasons. Those who lost interest cited a lack of autonomy (43%), publishing requirements (32%), and income discrepancy (26%) as reasons. Many residents report losing interest in academics during residency. Traditional metrics valued in the recruitment process may not serve as positive predictors of an academic career path. Reasons why residents lose interest are not easily correctable, but mentorship, adequate career counseling, and research opportunities during training remain factors that can be addressed across all residency programs.

  3. Medical and social factors influencing reproduction in Serbia

    Directory of Open Access Journals (Sweden)

    Šulović Vojin

    2002-01-01

    Full Text Available The authors present results of researches whose aim was to determine the factors that may substantially influence population reproduction in the Republic of Serbia, taking into consideration all specific factors, like cultural background, economic situation, health education, health service organization, religious and historical factors, etc. The research was based on the population census from 1981. Seventeen regions of the inner part of the Republic of Serbia, Vojvodina and Kosovo were included in this research. Stratification was made according to the place of living (village, town age, occupation (farmer, housewife, non and half-qualified, qualified and highly qualified workers and education (without education, with unfinished or finished primary school, with secondary school, with college or university degree. In this way 2,141 women were questioned with 101 questions by the method of interview. Interviews were conducted exclusively by doctors - gynaecologists. We determined the frequency of the use of contraceptives, intentional abortions, spontaneous abortions, pre-term deliveries, marriage infertility and term deliveries. Thus, 57.4% of women had basic knowledge of contraception, but only 15.9% of them used it; 58.9% of women had intentional abortions; 16.2% of women had spontaneous abortions, 5.1% of them had pre-term deliveries, and 67% of women had term deliveries. Marriage infertility was found in 8.6% of women. When evaluating population health and behavior, we obtained some information and data concerning addicted diseases (alcohol, smoking, drugs, tranquilizers homosexuality and ways of sexual intercourse. It was concluded that enormous differences existed among certain regions in the Republic of Serbia, which were conditioned by the diversity of the above mentioned influences. Proposals for the measures to be undertaken in the Republic of Serbia in order to regulate population policy, are given.

  4. Factors That Influence Technology Integration in the Classroom

    Science.gov (United States)

    Montgomery, Maureen C.

    2017-01-01

    Education is one area where the use of technology has had great impact on student learning. The integration of technology in teaching and learning can significantly influence the outcome of education in the classroom. However, there are a myriad of factors that influence technology integration in the classroom. The purpose of this study was to…

  5. Factors Influencing Choice of Inguinal Hernia Repair Technique

    African Journals Online (AJOL)

    This study sought to highlight factors that may influence ... Experienced peers play a major role in training on the various repair ... Reasons influencing choice of repair technique include training ... (after appendectomy) accounting for 10 to 15% of all surgical ..... in medical school [as undergraduate students or as residents].

  6. Influence of breed and environmental factors on litter parameters of ...

    African Journals Online (AJOL)

    Influence of breed and environmental factors on litter parameters of rabbits ... There was a non-significant effect of season on litter site at birth, kits alive at birth and ... to rabbit reproduction as it influenced negatively more litter parameters than ...

  7. Factors influencing the, selection of state office furniture

    Science.gov (United States)

    R. Bruce Anderson; R. Bruce Anderson

    1973-01-01

    Evaluation of the factors influencing the selection of office furniture by nine state governments shows that quality and purchase price have the most important influence on the purchase decision. The intended use of the furniture and the purchasing regulations of the states were key f8CbrS in the use of wood furniture.

  8. Environmental factors influencing fluctuation of share prices on ...

    African Journals Online (AJOL)

    Environmental factors influencing fluctuation of share prices on Nigeria stock exchange market. ... What are these environmental variables that affect the fluctuation of share prices in Nigeria? ... The results show inflation, money supply, total deficits index of industrial production, interest rate and GDP influence stock prices.

  9. Factors influencing bacterial adhesion to contact lenses.

    Science.gov (United States)

    Dutta, Debarun; Cole, Nerida; Willcox, Mark

    2012-01-01

    The process of any contact lens related keratitis generally starts with the adhesion of opportunistic pathogens to contact lens surface. This article focuses on identifying the factors which have been reported to affect bacterial adhesion to contact lenses. Adhesion to lenses differs between various genera/species/strains of bacteria. Pseudomonas aeruginosa, which is the predominant causative organism, adheres in the highest numbers to both hydrogel and silicone hydrogel lenses in vitro. The adhesion of this strain reaches maximum numbers within 1h in most in vitro studies and a biofilm has generally formed within 24 h of cells adhering to the lens surface. Physical and chemical properties of contact lens material affect bacterial adhesion. The water content of hydroxyethylmethacrylate (HEMA)-based lenses and their iconicity affect the ability of bacteria to adhere. The higher hydrophobicity of silicone hydrogel lenses compared to HEMA-based lenses has been implicated in the higher numbers of bacteria that can adhere to their surfaces. Lens wear has different effects on bacterial adhesion, partly due to differences between wearers, responses of bacterial strains and the ability of certain tear film proteins when bound to a lens surface to kill certain types of bacteria.

  10. Factors that Influence Quality Service of Teachers

    Directory of Open Access Journals (Sweden)

    M. Nur Mustafa

    2013-07-01

    Full Text Available Education as a profession requires a thorough commitment and sincerity among educators in guiding and shaping the patterns of learning toward forming identities and lead change in the students. As an adult with a lot of knowledge and experience, classroom becomes an important medium for the delivery and access to knowledge to the students in an instructional condition that effectively and efficiently. Therefore, all educators need to prepare themselves to face challenges to deal with children as a leader in charge in constructing a conducive and persuasive educational relationship. Important characteristics in this context is how to create a memorable delivery systems that meet the standard qualities and aligned with the education laws enforced. As a teacher who has received training from experts and civil servants thus all actions taken should be sincere, open, meet the service specification that gives attention to the self-esteem of the students with a good service, quality, and meet their needs. Therefore, this study will discuss the main factors that affect the quality of service to the students among the teachers namely motivation and professional competence. Selected samples in this study were 327 teachers from Secondary School in Pekanbaru. This study has shown a clear interest in improving the quality of motivation and the quality of service of teachers to the students. The aspects of the professional competence of teachers are still experiencing problems in applying the knowledge and skills to lead and manage the classroom inrealizing   a conducive environment.

  11. Factors Influencing Arthropod Diversity on Green Roofs

    Directory of Open Access Journals (Sweden)

    Bracha Y. Schindler

    2011-01-01

    Full Text Available Green roofs have potential for providing substantial habitat to plants, birds, and arthropod species that are not well supported by other urban habitats. Whereas the plants on a typical green roof are chosen and planted by people, the arthropods that colonize it can serve as an indicator of the ability of this novel habitat to support a diverse community of organisms. The goal of this observational study was to determine which physical characteristics of a roof or characteristics of its vegetation correlate with arthropod diversity on the roof. We intensively sampled the number of insect families on one roof with pitfall traps and also measured the soil arthropod species richness on six green roofs in the Boston, MA area. We found that the number of arthropod species in soil, and arthropod families in pitfall traps, was positively correlated with living vegetation cover. The number of arthropod species was not significantly correlated with plant diversity, green roof size, distance from the ground, or distance to the nearest vegetated habitat from the roof. Our results suggest that vegetation cover may be more important than vegetation diversity for roof arthropod diversity, at least for the first few years after establishment. Additionally, we found that even green roofs that are small and isolated can support a community of arthropods that include important functional groups of the soil food web.

  12. Analysis on influencing factors of clinical teachers’ job satisfaction by structural equation model

    Directory of Open Access Journals (Sweden)

    Haiyi Jia

    2017-02-01

    Full Text Available [Research objective] Analyze the influencing factors of clinical teachers’ job satisfaction. [Research method] The ERG theory was used as the framework to design the questionnaires. Data were analyzed by structural equation model for investigating the influencing factors. [Research result] The modified model shows that factors of existence needs and growth needs have direct influence on the job satisfaction of clinical teachers, the influence coefficients are 0.540 and 0.380. The three influencing factors have positive effects on each other, and the correlation coefficients are 0.620, 0.400 and 0.330 respectively. [Research conclusion] Relevant departments should take active measures to improve job satisfaction of clinical teachers from two aspects: existence needs and growth needs, and to improve their work enthusiasm and teaching quality.

  13. Factors influencing lysis time stochasticity in bacteriophage λ

    Directory of Open Access Journals (Sweden)

    Dennehy John J

    2011-08-01

    Full Text Available Abstract Background Despite identical genotypes and seemingly uniform environments, stochastic gene expression and other dynamic intracellular processes can produce considerable phenotypic diversity within clonal microbes. One trait that provides a good model to explore the molecular basis of stochastic variation is the timing of host lysis by bacteriophage (phage. Results Individual lysis events of thermally-inducible λ lysogens were observed using a temperature-controlled perfusion chamber mounted on an inverted microscope. Both mean lysis time (MLT and its associated standard deviation (SD were estimated. Using the SD as a measure of lysis time stochasticity, we showed that lysogenic cells in controlled environments varied widely in lysis times, and that the level of lysis time stochasticity depended on allelic variation in the holin sequence, late promoter (pR' activity, and host growth rate. In general, the MLT was positively correlated with the SD. Both lower pR' activities and lower host growth rates resulted in larger SDs. Results from premature lysis, induced by adding KCN at different time points after lysogen induction, showed a negative correlation between the timing of KCN addition and lysis time stochasticity. Conclusions Taken together with results published by others, we conclude that a large fraction of λ lysis time stochasticity is the result of random events following the expression and diffusion of the holin protein. Consequently, factors influencing the timing of reaching critical holin concentrations in the cell membrane, such as holin production rate, strongly influence the mean lysis time and the lysis time stochasticity.

  14. Influencing Factors of University Students’ Use of Social Network Sites: An Empirical Analysis in China

    Directory of Open Access Journals (Sweden)

    Liqiong Liu

    2018-03-01

    Full Text Available This paper explores the influencing factors of Chinese university students in accepting and using social networking sites (SNS to propose measures and recommendations that can guide and help these students correctly use SNS. In addition, this paper aims to provide theoretical support in increasing user loyalty for the SNS service providers and attract new users. The correlation and multiple regression analyses showed that perceived value, enjoyment, and influence positively influence the intention of individuals to use SNS.

  15. FACTORS INFLUENCING YIELD SPREADS OF THE MALAYSIAN BONDS

    Directory of Open Access Journals (Sweden)

    Norliza Ahmad

    2009-01-01

    Full Text Available Malaysian bond market is developing rapidly but not much is understood in terms of macroeconomic factors that could influence the yield spread of the Ringgit Malaysian denominated bonds. Based on a multifactor model, this paper examines the impact of four macroeconomic factors namely: Kuala Lumpur Composite Index (KLCI, Industry Production Index (IPI, Consumer Price Index (CPI and interest rates (IR on bond yield spread of the Malaysian Government Securities (MGS and Corporate Bonds (CBs for a period from January 2001 to December 2008. The findings support the expected hypotheses that CPI and IR are the major drivers that influence the changes in MGS yield spreads. However IPI and KLCI have weak and no influence on MGS yield spreads respectively Whilst IR, CPI and IPI have significant influence on the yield spreads of CB1, CB2 and CB3, KLCI has significant influence only on the CB1 yield spread but not on CB2 and CB3 yield spreads.

  16. Factors Influencing the Adoption of Minimally Invasive Surgery ...

    African Journals Online (AJOL)

    Background: Cost is a major concern for delivery of minimally invasive surgical technologies due to the nature of resources required. It is unclear whether factors extrinsic to technology availability impact on this uptake. Objectives: To establish the influence of institutional, patient and surgeon-related factors in the adoption of ...

  17. Factors influencing medical students in pursuing a career in surgery ...

    African Journals Online (AJOL)

    Background: Many factors play a role in the decision of a medical student to pursue a career in surgery. With a decline in numbers of applications into surgical programmes seen globally, the aim of this study was to determine the factors that influence medical students in pursuing a career in surgery. Methods: A descriptive ...

  18. Factors that Influence Students' Decision to Dropout of Online Courses

    Science.gov (United States)

    Willging, Pedro A.; Johnson, Scott D.

    2009-01-01

    Although there are many reasons why students dropout of college courses, those reasons may be unique for students who are enrolled in an online program. Issues of isolation, disconnectedness, and technological problems may be factors that influence a student to leave a course. To understand these factors, an online survey was developed to collect…

  19. Factors that influence household and individual clothing expenditure ...

    African Journals Online (AJOL)

    S Blignaut

    Contributing factors are the growth of low-priced apparel ... determine which factors influence household and individual ... explicitly deals with this concept. .... The income elasticity for clothing for the two-parent ..... Nelson (1989) found that mothers with less than a .... fashion consciousness and style preferences should.

  20. Alternative Administrative Certification: Socializing Factors Influencing Program Choice

    Science.gov (United States)

    Bickmore, Dana L.; Bickmore, Steven T.; Raines, Sarah

    2013-01-01

    This study used an organizational socialization lens to examine factors influencing participants' decision to pursue the principalship and choice to engage in an alternate administration certification program. Through an analysis of participant focus groups and interviews, factors emerged from the codes that were compared with dimensions of…

  1. Interrelated factors influence of current stock market on pricing

    Directory of Open Access Journals (Sweden)

    Наталія Петрівна Мацелюх

    2015-03-01

    Full Text Available Impacts on market prices of securities are generalized. It is found that in the process of price determination and its implementation exist a system of interrelated factors of influence, which are divided into objective and subjective; internal and external; traditional and specific. It is proved that the impact of factors associated with risk pricing in financial assets

  2. Hierarchical and coupling model of factors influencing vessel traffic flow.

    Directory of Open Access Journals (Sweden)

    Zhao Liu

    Full Text Available Understanding the characteristics of vessel traffic flow is crucial in maintaining navigation safety, efficiency, and overall waterway transportation management. Factors influencing vessel traffic flow possess diverse features such as hierarchy, uncertainty, nonlinearity, complexity, and interdependency. To reveal the impact mechanism of the factors influencing vessel traffic flow, a hierarchical model and a coupling model are proposed in this study based on the interpretative structural modeling method. The hierarchical model explains the hierarchies and relationships of the factors using a graph. The coupling model provides a quantitative method that explores interaction effects of factors using a coupling coefficient. The coupling coefficient is obtained by determining the quantitative indicators of the factors and their weights. Thereafter, the data obtained from Port of Tianjin is used to verify the proposed coupling model. The results show that the hierarchical model of the factors influencing vessel traffic flow can explain the level, structure, and interaction effect of the factors; the coupling model is efficient in analyzing factors influencing traffic volumes. The proposed method can be used for analyzing increases in vessel traffic flow in waterway transportation system.

  3. The influence of family factors on delinquent adolescents in ...

    African Journals Online (AJOL)

    This study was carried out with the aim of finding out the influence of family factors on delinquent adolescents in secondary schools in Edo South Senatorial District of Edo State. This study ascertained the extents to which family factors such as parent child rearing style, family type and parent socio economic background ...

  4. Factors influencing societal response of nanotechnology : an expert stakeholder analysis

    NARCIS (Netherlands)

    Gupta, N.; Fischer, A.R.H.; Lans, van der I.A.; Frewer, L.J.

    2012-01-01

    Nanotechnology can be described as an emerging technology and, as has been the case with other emerging technologies such as genetic modification, different socio-psychological factors will potentially influence societal responses to its development and application. These factors will play an

  5. Socio-economic factors influencing cassava production in Kuje and ...

    African Journals Online (AJOL)

    This study examined socio-economic factors influencing output level of cassava production in Kuje and Abaji Area Councils of Federal Capital Territory, Abuja. The specific objectives were to:identify the socio-economic characteristics of sampled cassava farmers in the study area; determine the socio-economic factors ...

  6. Hierarchical and coupling model of factors influencing vessel traffic flow.

    Science.gov (United States)

    Liu, Zhao; Liu, Jingxian; Li, Huanhuan; Li, Zongzhi; Tan, Zhirong; Liu, Ryan Wen; Liu, Yi

    2017-01-01

    Understanding the characteristics of vessel traffic flow is crucial in maintaining navigation safety, efficiency, and overall waterway transportation management. Factors influencing vessel traffic flow possess diverse features such as hierarchy, uncertainty, nonlinearity, complexity, and interdependency. To reveal the impact mechanism of the factors influencing vessel traffic flow, a hierarchical model and a coupling model are proposed in this study based on the interpretative structural modeling method. The hierarchical model explains the hierarchies and relationships of the factors using a graph. The coupling model provides a quantitative method that explores interaction effects of factors using a coupling coefficient. The coupling coefficient is obtained by determining the quantitative indicators of the factors and their weights. Thereafter, the data obtained from Port of Tianjin is used to verify the proposed coupling model. The results show that the hierarchical model of the factors influencing vessel traffic flow can explain the level, structure, and interaction effect of the factors; the coupling model is efficient in analyzing factors influencing traffic volumes. The proposed method can be used for analyzing increases in vessel traffic flow in waterway transportation system.

  7. Factors Influencing the Yemeni Customers’ Intention to Adopt Takaful Products

    Directory of Open Access Journals (Sweden)

    Abdelghani Echchabi

    2015-01-01

    Full Text Available The purpose of this study is to examine the Yemeni customers’ intention to adopt Takaful products, and to explore the potential factors that influence their decision. This study applies SEM and one sample t-test to analyse the collected data. The results indicate that among the factors included in this study, only compatibility positively and significantly affects the adoption intention. This is the first study that addresses the adoption of Takaful products in Yemen and the factors that influence it. Furthermore, this study extends the Innovations Diffusion Theory (IDT by applying it to a different setting.

  8. Nuclear medicine - factors influencing the choice and use of radionuclides in diagnosis and therapy

    International Nuclear Information System (INIS)

    Anon.

    1983-01-01

    This report addresses the many factors which influence the choice of the proper radiopharmaceutical drug product for the diagnosis or treatment of a specific disease or condition in a human subject. The Report examines the historical factors that influence the choice of radionuclides, the factors that influence the localization of radionuclides in tissues, the factors that influence the choice of instruments, and include an evaluation of the nuclear medicine procedures that could be selected and their clinical usefulness. In examining these factors the desirable characteristics of the radiopharmaceutical drug products of the measurement systems are identified. The methods of dose determination and the assumptions used in determination of dose are developed. There is also a section on radiation effects. A chapter on guidelines for procedures in nuclear medicine and some general and specific recommendations for protection of patients conclude the body of the text

  9. Factors influencing the latency of simple reaction time

    Directory of Open Access Journals (Sweden)

    David L Woods

    2015-03-01

    Full Text Available Simple reaction time (SRT, the minimal time needed to respond to a stimulus, is a basic measure of processing speed. SRTs were first measured by Francis Galton in the 19th century who reported visual SRT latencies below 190 ms in young subjects. However, recent large-scale studies have reported substantially increased SRT latencies that differ markedly in different laboratories, in part due to timing delays introduced by computer hardware and software used for SRT measurement. We developed a calibrated and temporally-precise SRT paradigm to analyze the factors that influence SRT latencies in a paradigm where visual stimuli were presented to the left or right hemifield at varying stimulus onset asynchronies (SOAs. Experiment 1 examined a community sample of 1469 subjects ranging in age from 18 to 65. Mean SRT latencies were short (231 ms, 213 ms when corrected for hardware delays and increased significantly with age (0.55 ms/year, but were unaffected by sex or education. As in previous studies, SRTs were prolonged at shorter SOAs and were slightly faster for stimuli presented in the visual field contralateral to the responding hand. Stimulus detection time (SDT was estimated by subtracting movement-initiation time, measured in a speeded finger-tapping test, from SRTs. SDT latencies averaged 131 ms and were unaffected by age. Experiment 2 tested 189 subjects ranging in age from 18 to 82 years in a different laboratory using a larger range of SOAs. Both SRTs and SDTs were slightly prolonged (by 7 ms. SRT latencies increased with age while SDT latencies did not. Precise computer-based measurements of SRT latencies show that processing speed is as fast in contemporary populations as in those from the Victorian era and that age-related increases in SRT latencies are due primarily to slowed motor output.

  10. Factors influencing the latency of simple reaction time

    Science.gov (United States)

    Woods, David L.; Wyma, John M.; Yund, E. William; Herron, Timothy J.; Reed, Bruce

    2015-01-01

    Simple reaction time (SRT), the minimal time needed to respond to a stimulus, is a basic measure of processing speed. SRTs were first measured by Francis Galton in the 19th century, who reported visual SRT latencies below 190 ms in young subjects. However, recent large-scale studies have reported substantially increased SRT latencies that differ markedly in different laboratories, in part due to timing delays introduced by the computer hardware and software used for SRT measurement. We developed a calibrated and temporally precise SRT test to analyze the factors that influence SRT latencies in a paradigm where visual stimuli were presented to the left or right hemifield at varying stimulus onset asynchronies (SOAs). Experiment 1 examined a community sample of 1469 subjects ranging in age from 18 to 65. Mean SRT latencies were short (231, 213 ms when corrected for hardware delays) and increased significantly with age (0.55 ms/year), but were unaffected by sex or education. As in previous studies, SRTs were prolonged at shorter SOAs and were slightly faster for stimuli presented in the visual field contralateral to the responding hand. Stimulus detection time (SDT) was estimated by subtracting movement initiation time, measured in a speeded finger tapping test, from SRTs. SDT latencies averaged 131 ms and were unaffected by age. Experiment 2 tested 189 subjects ranging in age from 18 to 82 years in a different laboratory using a larger range of SOAs. Both SRTs and SDTs were slightly prolonged (by 7 ms). SRT latencies increased with age while SDT latencies remained stable. Precise computer-based measurements of SRT latencies show that processing speed is as fast in contemporary populations as in the Victorian era, and that age-related increases in SRT latencies are due primarily to slowed motor output. PMID:25859198

  11. Factors influencing the latency of simple reaction time.

    Science.gov (United States)

    Woods, David L; Wyma, John M; Yund, E William; Herron, Timothy J; Reed, Bruce

    2015-01-01

    Simple reaction time (SRT), the minimal time needed to respond to a stimulus, is a basic measure of processing speed. SRTs were first measured by Francis Galton in the 19th century, who reported visual SRT latencies below 190 ms in young subjects. However, recent large-scale studies have reported substantially increased SRT latencies that differ markedly in different laboratories, in part due to timing delays introduced by the computer hardware and software used for SRT measurement. We developed a calibrated and temporally precise SRT test to analyze the factors that influence SRT latencies in a paradigm where visual stimuli were presented to the left or right hemifield at varying stimulus onset asynchronies (SOAs). Experiment 1 examined a community sample of 1469 subjects ranging in age from 18 to 65. Mean SRT latencies were short (231, 213 ms when corrected for hardware delays) and increased significantly with age (0.55 ms/year), but were unaffected by sex or education. As in previous studies, SRTs were prolonged at shorter SOAs and were slightly faster for stimuli presented in the visual field contralateral to the responding hand. Stimulus detection time (SDT) was estimated by subtracting movement initiation time, measured in a speeded finger tapping test, from SRTs. SDT latencies averaged 131 ms and were unaffected by age. Experiment 2 tested 189 subjects ranging in age from 18 to 82 years in a different laboratory using a larger range of SOAs. Both SRTs and SDTs were slightly prolonged (by 7 ms). SRT latencies increased with age while SDT latencies remained stable. Precise computer-based measurements of SRT latencies show that processing speed is as fast in contemporary populations as in the Victorian era, and that age-related increases in SRT latencies are due primarily to slowed motor output.

  12. Factors negatively influencing knowledge sharing in software development

    Directory of Open Access Journals (Sweden)

    Lucas T. Khoza

    2017-07-01

    Objective: This study seeks to identify factors that negatively influence knowledge sharing in software development in the developing country context. Method: Expert sampling as a subcategory of purposive sampling was employed to extract information, views and opinions from experts in the field of information and communication technology, more specifically from those who are involved in software development projects. Four Johannesburg-based software developing organisations listed on the Johannesburg Stock Exchange (JSE, South Africa, participated in this research study. Quantitative data were collected using an online questionnaire with closed-ended questions. Results: Findings of this research reveal that job security, motivation, time constraints, physiological factors, communication, resistance to change and rewards are core factors negatively influencing knowledge sharing in software developing organisations. Conclusions: Improved understanding of factors negatively influencing knowledge sharing is expected to assist software developing organisations in closing the gap for software development projects failing to meet the triple constraint of time, cost and scope.

  13. Which factors influence women in the decision to breastfeed?

    Directory of Open Access Journals (Sweden)

    Cândida Canicali Primo

    Full Text Available Objective.Identify the factors that influence women in the decision to breastfeed. Methods. Integrative review. Information was gathered from original articles, case studies, theoretical studies, consensus and systematic reviews published between 2007-2013 in Spanish, Portuguese and English and recovered in the databases MEDLINE and LILACS. The descriptors used in this study were: breastfeeding, maternal behavior, risk factors, lactation and newborn. Results. Were included 30 articles, grouped into five categories. Factors influencing the decision of the breastfeeding woman are a convergence of breastfeeding's advantages, benefits and justifications, family, social and professional support, sociodemographic and clinical characteristics of women, personal experience and family tradition and personal choice. Conclusion. The decision to breastfeed by women is influenced by a convergence of factors. It is essential the role of nursing to encourage women in the decision to initiate and maintain breastfeeding her child.

  14. Factors that influence beverage choices at meal times

    DEFF Research Database (Denmark)

    Mueller Loose, Simone; Jaeger, S. R.

    2012-01-01

    Beverages are consumed at almost every meal occasion, but knowledge about the factors that influence beverage choice is less than for food choice. The aim of this research was to characterize and quantify factors that influence beverage choices at meal times. Insights into what beverages are chosen...... consumers. Participants (n=164) described 8356 meal occasions in terms of foods and beverages consumed, and the contextual characteristics of the occasion. Beverage choice was explored with random-parameter logit regressions to reveal influences linked to food items eaten, context factors and person factors....... Thereby this study contributed to the food choice kaleidoscope research approach by expressing the degree of context dependency in form of odds ratios and according significance levels. The exploration of co-occurrence of beverages with food items suggests that beverage-meal item combinations can be meal...

  15. Factors influencing teamwork and collaboration within a tertiary medical center.

    Science.gov (United States)

    Chien, Shu Feng; Wan, Thomas Th; Chen, Yu-Chih

    2012-04-26

    To understand how work climate and related factors influence teamwork and collaboration in a large medical center. A survey of 3462 employees was conducted to generate responses to Sexton's Safety Attitudes Questionnaire (SAQ) to assess perceptions of work environment via a series of five-point, Likert-scaled questions. Path analysis was performed, using teamwork (TW) and collaboration (CO) as endogenous variables. The exogenous variables are effective communication (EC), safety culture (SC), job satisfaction (JS), work pressure (PR), and work climate (WC). The measurement instruments for the variables or summated subscales are presented. Reliability of each sub-scale are calculated. Alpha Cronbach coefficients are relatively strong: TW (0.81), CO (0.76), EC (0.70), SC (0.83), JS (0.91), WP (0.85), and WC (0.78). Confirmatory factor analysis was performed for each of these constructs. Path analysis enables to identify statistically significant predictors of two endogenous variables, teamwork and intra-organizational collaboration. Significant amounts of variance in perceived teamwork (R(2) = 0.59) and in collaboration (R(2) = 0.75) are accounted for by the predictor variables. In the initial model, safety culture is the most important predictor of perceived teamwork, with a β weight of 0.51, and work climate is the most significant predictor of collaboration, with a β weight of 0.84. After eliminating statistically insignificant causal paths and allowing correlated predictors1, the revised model shows that work climate is the only predictor positively influencing both teamwork (β = 0.26) and collaboration (β = 0.88). A relatively weak positive (β = 0.14) but statistically significant relationship exists between teamwork and collaboration when the effects of other predictors are simultaneously controlled. Hospital executives who are interested in improving collaboration should assess the work climate to ensure that employees are operating in a setting conducive

  16. Factors influencing teamwork and collaboration within a tertiary medical center

    Science.gov (United States)

    Chien, Shu Feng; Wan, Thomas TH; Chen, Yu-Chih

    2012-01-01

    AIM: To understand how work climate and related factors influence teamwork and collaboration in a large medical center. METHODS: A survey of 3462 employees was conducted to generate responses to Sexton’s Safety Attitudes Questionnaire (SAQ) to assess perceptions of work environment via a series of five-point, Likert-scaled questions. Path analysis was performed, using teamwork (TW) and collaboration (CO) as endogenous variables. The exogenous variables are effective communication (EC), safety culture (SC), job satisfaction (JS), work pressure (PR), and work climate (WC). The measurement instruments for the variables or summated subscales are presented. Reliability of each sub-scale are calculated. Alpha Cronbach coefficients are relatively strong: TW (0.81), CO (0.76), EC (0.70), SC (0.83), JS (0.91), WP (0.85), and WC (0.78). Confirmatory factor analysis was performed for each of these constructs. RESULTS: Path analysis enables to identify statistically significant predictors of two endogenous variables, teamwork and intra-organizational collaboration. Significant amounts of variance in perceived teamwork (R2 = 0.59) and in collaboration (R2 = 0.75) are accounted for by the predictor variables. In the initial model, safety culture is the most important predictor of perceived teamwork, with a β weight of 0.51, and work climate is the most significant predictor of collaboration, with a β weight of 0.84. After eliminating statistically insignificant causal paths and allowing correlated predictors1, the revised model shows that work climate is the only predictor positively influencing both teamwork (β = 0.26) and collaboration (β = 0.88). A relatively weak positive (β = 0.14) but statistically significant relationship exists between teamwork and collaboration when the effects of other predictors are simultaneously controlled. CONCLUSION: Hospital executives who are interested in improving collaboration should assess the work climate to ensure that employees are

  17. An exploration study to detect important factors influencing insurance firms

    OpenAIRE

    Farzaneh Soleimani; Fattaneh Alizadeh Meshkani; Abdullah Naami

    2013-01-01

    The recent trend on competition among insurance firms has increased motivation to look for important factors influencing this industry. In this paper, we present an empirical investigation to find important factors shaping this industry. The proposed study designs a questionnaire in Likert scale and, using principal component analysis, detects important factors on the success of this industry. Cronbach alpha is calculated as 0.849, and Kaiser-Meyer-Olkin and Bartlett's Test are calculated as ...

  18. Helium Compton Form Factor Measurements at CLAS

    Energy Technology Data Exchange (ETDEWEB)

    Voutier, Eric J.-M. [Laboratoire de Physique Subatomique et Cosmologie

    2013-07-01

    The distribution of the parton content of nuclei, as encoded via the generalized parton distributions (GPDs), can be accessed via the deeply virtual Compton scattering (DVCS) process contributing to the cross section for leptoproduction of real photons. Similarly to the scattering of light by a material, DVCS provides information about the dynamics and the spatial structure of hadrons. The sensitivity of this process to the lepton beam polarization allows to single-out the DVCS amplitude in terms of Compton form factors that contain GPDs information. The beam spin asymmetry of the $^4$He($\\vec {\\mathrm e}$,e$' \\gamma ^4$He) process was measured in the experimental Hall B of the Jefferson Laboratory to extract the real and imaginary parts of the twist-2 Compton form factor of the $^4$He nucleus. The experimental results reported here demonstrate the relevance of this method for such a goal, and suggest the dominance of the Bethe-Heitler amplitude to the unpolarized process in the kinematic range explored by the experiment.

  19. A brief review of salient factors influencing adult eating behaviour.

    Science.gov (United States)

    Emilien, Christine; Hollis, James H

    2017-12-01

    A better understanding of the factors that influence eating behaviour is of importance as our food choices are associated with the risk of developing chronic diseases such as obesity, CVD, type 2 diabetes or some forms of cancer. In addition, accumulating evidence suggests that the industrial food production system is a major contributor to greenhouse gas emission and may be unsustainable. Therefore, our food choices may also contribute to climate change. By identifying the factors that influence eating behaviour new interventions may be developed, at the individual or population level, to modify eating behaviour and contribute to society's health and environmental goals. Research indicates that eating behaviour is dictated by a complex interaction between physiology, environment, psychology, culture, socio-economics and genetics that is not fully understood. While a growing body of research has identified how several single factors influence eating behaviour, a better understanding of how these factors interact is required to facilitate the developing new models of eating behaviour. Due to the diversity of influences on eating behaviour this would probably necessitate a greater focus on multi-disciplinary research. In the present review, the influence of several salient physiological and environmental factors (largely related to food characteristics) on meal initiation, satiation (meal size) and satiety (inter-meal interval) are briefly discussed. Due to the large literature this review is not exhaustive but illustrates the complexity of eating behaviour. The present review will also highlight several limitations that apply to eating behaviour research.

  20. [Factors influencing research activity of Andalusian nurses and improvement strategies].

    Science.gov (United States)

    López Alonso, Sergio R; Gálvez González, María; Amezcua, Manuel

    2013-04-01

    To identify factors influencing research activity of Andalusian nurses and to find improvement strategies. Qualitative research using SWOT analysis (weaknesses, threats, strengths, opportunities). Nurses were selected deliberately in eight groups according to predetermined criteria. Analysis included categorization and relationship of factors and strategies. 81 participants were included in groups of 7-12 range. 45 categories were identified with 212 factors: 12 weaknesses (50 factors), 10 strengths (44 factors), 12 threats (68 factors) and 11 opportunities (50 factors). In addition, 32 categories were identified with 53 strategies: 14 categories of W-T strategies (42 strategies), 3 categories of S-T strategies (11 strategies), 5 categories of W-O strategies (13 strategies) and 10 categories of S-O strategies (41 strategies). Nurses identified numerous factors, mainly threats. The strategies are focused on W-T but they also suggest many but weak 5-0 strategies due to the low potential of the opportunities and strengths perceived.

  1. A survey on critical factors influencing organizational commitment

    Directory of Open Access Journals (Sweden)

    Hamidreza Kheirkhah

    2014-04-01

    Full Text Available Organizational commitment is an important issue and organization attitude has become an area of study among many researchers in the fields of organizational behavior. In fact, there are many studies on human resource management where the effects of organizational commitment on other issues have been investigated and the purpose of this research is to find critical factors influencing on organizational commitment. Based on an exploration of the literature review and interviews, the proposed study of this paper extracts 24 variables and using factor analysis, we select the most important factors, which are grouped in four categories. The implementation of our factor analysis has revealed Affective commitment, Continuous commitment, Moral commitment and Enduring commitment are the most important factors influencing organizational commitment.

  2. A survey on critical factors influencing agricultural insurance

    Directory of Open Access Journals (Sweden)

    Ali Valipour

    2013-01-01

    Full Text Available Agricultural business is a very high-risk job and an increase demand for agricultural products from one side and steady increase in production cost and weather changes, on the other side, have motivated many to use insurance for agricultural products. Insurance plays an important role in influencing crop production and insured satisfaction or farmers. The purpose of this research is to find critical components in agricultural insurance. Based on an exploration of the literature review and interviews, the proposed study of this paper extracts 24 variables and using factor analysis, we select the most important factors, which are grouped in seven categories. The implementation of our factor analysis has revealed uncertainty, moderator, market equilibrium, risky environment, empowering factor, education, training, structural hazards and natural ecosystems as the most important factors influencing agricultural industry.

  3. Quantitative influence of risk factors on blood glucose level.

    Science.gov (United States)

    Chen, Songjing; Luo, Senlin; Pan, Limin; Zhang, Tiemei; Han, Longfei; Zhao, Haixiu

    2014-01-01

    The aim of this study is to quantitatively analyze the influence of risk factors on the blood glucose level, and to provide theory basis for understanding the characteristics of blood glucose change and confirming the intervention index for type 2 diabetes. The quantitative method is proposed to analyze the influence of risk factors on blood glucose using back propagation (BP) neural network. Ten risk factors are screened first. Then the cohort is divided into nine groups by gender and age. According to the minimum error principle, nine BP models are trained respectively. The quantitative values of the influence of different risk factors on the blood glucose change can be obtained by sensitivity calculation. The experiment results indicate that weight is the leading cause of blood glucose change (0.2449). The second factors are cholesterol, age and triglyceride. The total ratio of these four factors reaches to 77% of the nine screened risk factors. And the sensitivity sequences can provide judgment method for individual intervention. This method can be applied to risk factors quantitative analysis of other diseases and potentially used for clinical practitioners to identify high risk populations for type 2 diabetes as well as other disease.

  4. FACTORS INFLUENCING BRAND EQUITY OF BALI AS A TOURISM DESTINATION

    Directory of Open Access Journals (Sweden)

    I Ketut Surya Diarta

    2016-03-01

    Full Text Available Globally, competition among tourism destinations is more stringent in getting foreign tourists, including Bali. One effort to win the competition is increasing destination brand equity through maintaining its influencing factors and gaining tourist positive behavior toward destination. This effort, in long run, will increase and stabilize destination revenue and sustainability. This research aims to analyze factors influencing brand equity of Bali as a tourism destination. This research was conducted in Bali’s five major tourism objects. The 240 foreign tourists were chosen as respondents through convenience sampling technique. Data were analyzed using factor analysis. The results showed that factors that significantly influenced Bali brand equity were: symbolic and experiential benefit factor, direct and indirect destinations attributes, destination reliability and tangibility, assurance and empathy, brand destinations recognition and recall, destinations common psychological attributes, destination common functional attributes, unique functional attributes, behavioral loyalty, destination awareness, and attitudinal loyalty. Given the fluctuative nature of brand equity, Bali needs a consistent effort to maintain or to enhance brand equity of Bali as a tourism destination. Maintaining the dominant factors that influence the strength of brand equity can be used as a basis to develop destination branding strategy to expand market segment,  choose the right target market, and anchoring destination position in world market competition.

  5. Factors That Influence the Practice of Elective Induction of Labor

    Science.gov (United States)

    Moore, Jennifer; Low, Lisa Kane

    2012-01-01

    Elective induction of labor has been linked to increased rates of prematurity and rising rates of cesarean birth. The purpose of this investigation was to evaluate current trends in induction of labor scholarship focusing on evidence-based factors that influence the practice of elective induction. A key word search was conducted to identify studies on the practice of elective induction of labor. Analysis of the findings included clustering and identification of recurrent themes among the articles with 3 categories being identified. Under each category, the words/phrases were further clustered until a construct could be named. A total of 49 articles met inclusion criteria: 7 patient, 6 maternity care provider, and 4 organization factors emerged. Only 4 of the articles identified were evidence based. Patient factors were divided into preferences/convenience, communication, fear, pressure/influence, trust, external influences, and technology. Provider factors were then divided into practice preferences/convenience, lack of information, financial incentives, fear, patient desire/demand, and technology. Organization factors were divided into lack of enforcement/accountability, hospital culture, scheduling of staff, and market share issues. Currently, there is limited data-based information focused on factors that influence elective induction of labor. Despite patient and provider convenience/preferences being cited in the literature, the evidence does not support this practice. PMID:22843006

  6. ICT Interventions for Girls: Factors Influencing ICT Career Intentions

    Directory of Open Access Journals (Sweden)

    Elena Gorbacheva

    2014-11-01

    Full Text Available Intervention programs aimed at promoting study and work opportunities in the Information and Communications Technology (ICT field to schoolgirls have been encouraged to combat a decline in the interest among girls to study ICT at school. The goal of our study is to investigate the influence of such interventions on schoolgirls’ intentions to choose a career in the ICT field by analysing comprehensive survey data (n = 3577, collected during four interventions in Australia, using the Partial Least Squares method. Our study is also aimed at identifying other factors influencing ICT career intentions. We found that the attitude towards interventions has an indirect influence on ICT career intentions by affecting interest in ICT. Our results also challenge several existing theoretical studies by showing that factors that had previously been suggested as influencers were found to have little or no impact in this study, these being same-sex education and computer usage.

  7. Factors influencing botulinum toxin dose instability in spasmodic dysphonia patients.

    Science.gov (United States)

    Rosow, David E; Pechman, Amanda; Saint-Victor, Sandra; Lo, Kaming; Lundy, Donna S; Casiano, Roy R

    2015-05-01

    Many patients with spasmodic dysphonia (SD) see consistent effects from botulinum toxin (BTX) injections of the same dose, whereas others require dosage changes over time. We sought to determine whether demographics (age and gender) or environmental factors (smoking) affect the long-term stability of BTX dosing in these patients. Retrospective review. Charts of all patients undergoing BTX injection for adductor SD were reviewed. Dosage change, defined as whether there was any difference in total dosage used between two beneficial injections, was used as a measure of dosing stability. Beneficial injections were indicated by a voice rating score of at least three of four and any non-zero duration of improved voice. Logistic regression analysis was performed to determine whether age, gender, smoking status, or duration of treatment correlated with odds of having a dosage change. A total of 211 patients were ultimately included. Age, gender, and smoking status were all found to have no correlative effect on dosing stability. The only factor that was predictive of dose stability was the number of previous beneficial injections, as every additional injection led to decreased odds of a change in dosage for the next injection (odds ratio=0.964; 95% confidence interval=0.947-0.981). Dosage of BTX injections for long-term treatment of SD has a significant propensity to remain stable over time. Factors such as age, gender, and smoking status do not appear to influence the dosage stability. These findings should allow for better patient counseling regarding expectations for their long-term treatment. Copyright © 2015 The Voice Foundation. Published by Elsevier Inc. All rights reserved.

  8. Nursing students' learning dynamics and influencing factors in clinical contexts.

    Science.gov (United States)

    Lee, Jung Jae; Clarke, Charlotte L; Carson, Maggie N

    2018-03-01

    Clinical placements are essential for students to develop clinical skills to qualify as nurses. However, various difficulties encountered by nursing students during their clinical education detract from developing clinical competencies. This constructivist grounded theory study aims to explore nursing students' experiences in clinical nursing education, and to identify the factors that influence the clinical education students receive. Twenty-one individual and six group semi-structured interviews were conducted with sixteen fourth year nursing students and four registered nurses. This research identified six factors that influence nursing students' clinical education: interpersonal, socio-cultural, instructional, environmental, emotional and physical factors. The research has developed a dynamic model of learning in clinical contexts, which offers opportunities to understand how students' learning is influenced multifactorially during clinical placements. The understanding and application of the model can improve nursing instructional design, and subsequently, nursing students' learning in clinical contexts. Copyright © 2017 Elsevier Ltd. All rights reserved.

  9. Factors Influencing Indonesian Internet Users Intention on Buying Books Online

    Directory of Open Access Journals (Sweden)

    Beatrik Messah

    2003-09-01

    Full Text Available The purpose of this research is to discover and analyse factors influencing Indonesian internet users intention on buying books online. Certain factors will be investigated are demographic, features, convenience, web design, and security. This research used questionaires to obtain data from the respondents. After the data collected, SPSS software is used to process the data with using Chi-Square test. The result found that features, convenience, and security factors of online bookstores and level of education, income, and occupation of the Indonesian Internet Users influence the people intention on buying books online. In the other hand, web design of the online bookstores and the age of the Indonesian internet users have no influence on their intention on buying books online.

  10. Maturity of hospital information systems: Most important influencing factors.

    Science.gov (United States)

    Vidal Carvalho, João; Rocha, Álvaro; Abreu, António

    2017-07-01

    Maturity models facilitate organizational management, including information systems management, with hospital organizations no exception. This article puts forth a study carried out with a group of experts in the field of hospital information systems management with a view to identifying the main influencing factors to be included in an encompassing maturity model for hospital information systems management. This study is based on the results of a literature review, which identified maturity models in the health field and relevant influencing factors. The development of this model is justified to the extent that the available maturity models for the hospital information systems management field reveal multiple limitations, including lack of detail, absence of tools to determine their maturity and lack of characterization for stages of maturity structured by different influencing factors.

  11. Factors influencing the perception of organic certification logos in Turkey

    OpenAIRE

    Karahan Uysal, Ö.; Miran, B.; Abay, C.; Boyaci, M.; Janssen, M.; Hamm, U.

    2013-01-01

    Consumers’ perceptions on organic certification logos and the factors influencing these perceptions were explored. Data from surveys conducted in major cities of Turkey revealed that organic food consumers had little knowledge about logos, although the declared level of trust in organic logos was high. According to ordered logit models, consumer’s perceptions on organic certification logos were influenced by purchasing frequency and weight of organic foods in total food consumption. Dummy v...

  12. Influence of beverage composition on the results of erosive potential measurement by different measurement techniques

    NARCIS (Netherlands)

    Jager, D. H. J.; Vieira, A. M.; Ruben, J. L.; Huysmans, M. C. D. N. J. M.

    2008-01-01

    The influence of beverage composition on the measurement of erosive potential is unclear. The aim of this study was to evaluate whether beverage composition influences the measurement of erosive potential and to evaluate the influence of exposure in small and large volumes. Eleven beverages were

  13. Influence of beverage composition on the results of erosive potential measurement by different measurement techniques.

    NARCIS (Netherlands)

    Jager, D.H.; Vieira, A.M.; Ruben, J.L.; Huysmans, M.C.D.N.J.M.

    2008-01-01

    The influence of beverage composition on the measurement of erosive potential is unclear. The aim of this study was to evaluate whether beverage composition influences the measurement of erosive potential and to evaluate the influence of exposure in small and large volumes. Eleven beverages were

  14. Factors influencing US medical students' decision to pursue surgery.

    Science.gov (United States)

    Schmidt, Lauren E; Cooper, Clairice A; Guo, Weidun Alan

    2016-06-01

    Interest and applications to surgery have steadily decreased over recent years in the United States. The goal of this review is to collect the current literature regarding US medical students' experience in surgery and factors influencing their intention to pursue surgery as a career. We hypothesize that multiple factors influence US medical students' career choice in surgery. Six electronic databases (PubMed, SCOPUS, Web of Science, Education Resources Information Center, Embase, and PsycINFO) were searched. The inclusion criteria were studies published after the new century related to factors influencing surgical career choice among US medical students. Factors influencing US medical student surgical career decision-making were recorded. A quality index score was given to each article selected to minimize risk of bias. We identified 38 relevant articles of more than 1000 nonduplicated titles. The factors influencing medical student decision for a surgical career were categorized into five domains: mentorship and role model (n = 12), experience (clerkship n = 9, stereotype n = 4), timing of exposure (n = 9), personal (lifestyle n = 8, gender n = 6, finance n = 3), and others (n = 2). This comprehensive systemic review identifies mentorship, experience in surgery, stereotypes, timing of exposure, and personal factors to be major determinants in medical students' decisions to pursue surgery. These represent areas that can be improved to attract applicants to general surgery residencies. Surgical faculty and residents can have a positive influence on medical students' decisions to pursue surgery as a career. Early introduction to the field of surgery, as well as recruitment strategies during the preclinical and clinical years of medical school can increase students' interest in a surgical career. Copyright © 2016 Elsevier Inc. All rights reserved.

  15. Modeling Factors with Influence on Sustainable University Management

    Directory of Open Access Journals (Sweden)

    Oana Dumitrascu

    2015-01-01

    Full Text Available The main objective of this paper is to present the factors with influence on the sustainable university management and the relationships between them. In the scientific approach we begin from a graphical model, according to which the extracurricular activities together with internal environmental factors influence students’ involvement in such activities, the university attractiveness, their academic performance and their integration into the socially-economic and natural environment (components related with sustainable development. The model emphasizes that individual performances, related to students’ participation in extracurricular activities, have a positive influence on the sustainability of university management. The results of the study have shown that the university sustainability may be influenced by a number of factors, such as students’ performance, students’ involvement in extracurricular activities or university’s attractiveness and can in turn influence implicitly also the sustainability of university management. The originality of the paper consists in the relationships study using the modeling method in general and informatics tools of modeling in particular, as well as through graphical visualization of some influences, on the sustainability university management.

  16. What factors influence British medical students' career intentions?

    Science.gov (United States)

    Ibrahim, Michael; Fanshawe, Angela; Patel, Vanash; Goswami, Karan; Chilvers, Geoffrey; Ting, Michelle; Pilavakis, Yiannis; Rao, Christopher; Athanasiou, Thanos

    2014-12-01

    The aim of this study was to identify factors that influence career choice in UK medical students. Students at seven institutions were invited to rate how important various factors were on influencing their career choices and how interested they were in pursuing different specialties. The influence of interpersonal relationship networks on career choice was also evaluated. 641 responses were collected. 44% (283) were male, 16% (105) were graduates and 41% (263) were final-year students. For Dermatology (p = 0.009), Paediatrics (p = 0.000), Radiology (p = 0.000), Emergency Medicine (p = 0.018) and Cardiothoracic Surgery (p = 0.000), there was a clear correlation between completing a clinical attachment and an interest in pursuing the specialty. Perceived characteristics of the speciality, individually and in clusters were considered important by specific subgroups of students, such as those interested in surgery. These students considered prestige (p = 0.0003), role models (p = 0.014), financial rewards after training (p = 0.0196) and technical challenge (p = 0.0011) as important factors. Demographics such as sex and age played a significant role in career choice. Interpersonal relationship networks do not have a significant influence on career intentions. This study shows that the career intentions of British medical students are influenced by their undergraduate experience and by the weight they place on different specialty-related factors.

  17. Factors influencing consumer behaviour in market vegetables in Yemen

    Directory of Open Access Journals (Sweden)

    Tarish H. Al-Gahaifi

    2011-01-01

    Full Text Available The purpose of the research is to understand factors influencing consumer behaviour when buying vegetables in Republic of Yemen. Data collection was done by structured questionnaire administered through schools, universities, government offices, and markets from 13 provinces in 5 governorates. Random convenience sampling technique was used. Total sample comprised of 463 completed questionnaires which were used for analysis. The respondents were classified into five categories on the base of their monthly income, age, education, gender, and type of settlement. Authors present the factors that can influence significantly this behaviour, e.g. price, quality, the location of seller, habit, personal relationship between consumer and seller, occasions, discount, sorting, word-mouth, time of purchase, the way of products display, and recommendation of friends and families. From the obtained results, it is obvious that there was high influence on the behaviour of Yemeni consumer when buying vegetables for factors price, occasions, discontent, and time of purchase, while factors habit, display, sorting, and the location of seller suggests medium influence, and the influence was low for word-mouth.

  18. Factors That Were Found to Influence Ghanaian Adolescents’ Eating Habits

    Directory of Open Access Journals (Sweden)

    Patricia Mawusi Amos

    2012-12-01

    Full Text Available The study sought to find out whether factors such as parental, peer, and media influences predict Ghanaian adolescent students’ eating habits. A random selection of 150 students from a population of senior high school students in Ghana were asked to complete the Eating Habits Questionnaire for Adolescents. Data were analyzed by the use of bivariate correlation, t test, and multiple regression analytical techniques using SPSS version 16. The findings revealed a significant positive relationship between peer influence and eating habits suggesting that the higher the peer pressure, the more unhealthy the students’ eating habits. Counterintuitively, parental and media influences did not significantly correlate with students’ eating habits. Gender difference in eating habits suggested that girls had more unhealthy eating habits than boys. Finally, multiple regression analysis revealed that peer influence was a better predictor of students’ eating habits than parental and media influences. The findings were discussed and recommendations were given in light of the study’s limitations.

  19. Influence of external action and structural factors on radiation blistering

    International Nuclear Information System (INIS)

    Kalin, B.A.; Chernov, I.I.; Fomina, E.P.; Korshunov, S.H.; Polsky, V.I.; Skorov, D.M.; Yakushin, V.L.

    1985-01-01

    A survey of experimental results is presented, pertaining to radiation blistering of a considerable number of materials (stainless steels, alloys with high nickel content, alloys of refractory metals) under helium ion irradiation with energies of 20-100 keV under conditions corresponding to the plasma-wall interaction: bombardment at various angles of incidence and cyclic irradiation in a wide spectrum of ion incidence angles; influence of external action, including thermocyclic; influence of preceding neutron and proton irradiation. It has been shown that external factors have a complex influence on blister parameters and erosion coefficients of materials. A study has been carried out on the influence of aluminium coatings, alloying additions, phase state of material and microstructure on the nature and degree of surface erosion. Complex influence of element and phase composition, as well as microstructural changes during heat treatment and welding on radiation erosion have been established. (orig.)

  20. Psychosocial factors for influencing healthy aging in adults in Korea.

    Science.gov (United States)

    Han, KyungHun; Lee, YunJung; Gu, JaSung; Oh, Hee; Han, JongHee; Kim, KwuyBun

    2015-03-07

    Healthy aging includes physical, psychological, social, and spiritual well-being in later years. The purpose of this study is to identify the psychosocial factors influencing healthy aging and examining their socio-demographic characteristics. Perceived health status, depression, self-esteem, self-achievement, ego-integrity, participation in leisure activities, and loneliness were identified as influential factors in healthy aging. 171 Korean adults aged between 45 and 77 years-old participated in the study. Self-reporting questionnaires were used, followed by descriptive statistics and multiple regressions as inferential statistical analyses. There were significant differences between participants' general characteristics: age, education, religion, housing, hobby, and economic status. The factors related to healthy aging had positive correlation with perceived health status, self-esteem, self-achievements, and leisure activities, and negative correlation with depression and loneliness. The factors influencing healthy aging were depression, leisure activities, perceived health status, ego integrity, and self-achievements. These factors were able to explain 51.9%. According to the results, depression is the factor with the greatest influence on healthy aging. Perceived health status, ego integrity, self-achievement, self-esteem, participation of leisure activities were also influential on healthy aging as beneficial factors.

  1. Factors of influence and changes in the tourism consumer behaviour

    Directory of Open Access Journals (Sweden)

    Fratu, D.

    2011-01-01

    Full Text Available Consumer behaviour is a very important aspect to be studied in every marketing activity, therefore in tourism marketing as well. Defining and identifying the factors that influence consumers help in understanding individual needs and buying processes in their whole complexity. Consumers have changed their behaviour over the last two years due to the instability of the economic environment. The author describes in this article the factors which influence consumer behaviour and also presents how it has changed over the past two years.

  2. Influence factors and corrections of low-energy γ-ray penetration in ash analysis

    International Nuclear Information System (INIS)

    Cheng Bo; Tuo Xianguo; Zhou Jianbin; Tong Yunfu

    2002-01-01

    The author introduces the system of the coal ash analyzer. This system is based on the low-energy γ-ray source 241 Am emitted two kinds of energy peaks 26.4 keV and 59.6 keV to analyze the ash in coal with the penetration way. The author also offers the factors to influence the accuracy of ash analysis, such as the size of coal, the environmental temperature, the important elements in coal, and water in coal too. At the same time, depending on the cause of the factors, it offer some methods of correction such as the way of the auto-hold energy peak, the way of the auto-compensation way, and so on. The author also mentions the other influence factors of the measurement accuracy to be noticed during the experiment. All these aim at clearing off the influence factors of measurement accuracy through the experiments

  3. Definition of correcting factors for absolute radon content measurement formula

    International Nuclear Information System (INIS)

    Ji Changsong; Xiao Ziyun; Yang Jianfeng

    1992-01-01

    The absolute method of radio content measurement is based on thomas radon measurement formula. It was found in experiment that the systematic error existed in radon content measurement by means of thomas formula. By the analysis on the behaviour of radon daughter five factors including filter efficiency, detector construction factor, self-absorbance, energy spectrum factor, and gravity factor were introduced into the thomas formula, so that the systematic error was eliminated. The measuring methods of the five factors are given

  4. Factors influencing training transfer in nursing profession: a qualitative study.

    Science.gov (United States)

    Ma, Fang; Bai, Yangjing; Bai, Yangjuan; Ma, Weiguang; Yang, Xiangyu; Li, Jiping

    2018-03-20

    There is a growing recognition that training is not translated into performance and the 'transfer problem' exists in organization training today. Although factors contributing to training transfer have been identified in business and industry, the factors influencing training transfer in nursing profession remain less clear. A qualitative descriptive study was undertaken in two tertiary referral hospitals in China from February 2013 to September 2013. Purposeful sampling of 24 nursing staffs were interviewed about the factors influencing training transfer. Seven themes evolved from the analysis, categorized in 4 main domains, which described the factors influencing training transfer in nursing profession in trainee characteristics, training design, work environment and profession domain. The trainee characteristics domain included attitude and ability. The training design domain included training content and instruction method. The work environment domain included supports as facilitators and opposition as hindrance. The theme pertaining to the profession domain was professional development. Health care managers need to understand the factors influencing training transfer for maximizing the benefits of training. The right beliefs and values about training, the rigorous employee selection for training, the relevance of training content, training instructions facilitating learning and transfer, supports from peer, supervisors and the organization, organizational culture such as change, sharing, learning and support, and professional development are key to successful training transfer. Furthermore, managers should be aware of the opposition from co-workers and find ways to prevent it.

  5. FACTORS INFLUENCING BRAND LOYALTY IN PROFESSIONAL SPORTS FANS

    OpenAIRE

    Yun-Tsan Lin; Chen-Hsien Lin

    2008-01-01

    Many researchers have provided comprehensive definitions for the term of brand loyalty and also examined the factors affecting brand loyalty with many empirical studies. But there is little research focusing on the brand loyalty of professional sports fans. The topic area about factors influencing brand loyalty in professional sports fans was identified because these fans bring significant financial benefits every year and stimulate economic growth in the United States. Although different con...

  6. FACTORS INFLUENCING YIELD SPREADS OF THE MALAYSIAN BONDS

    OpenAIRE

    Norliza Ahmad; Joriah Muhammad; Tajul Ariffin Masron

    2009-01-01

    Malaysian bond market is developing rapidly but not much is understood in terms of macroeconomic factors that could influence the yield spread of the Ringgit Malaysian denominated bonds. Based on a multifactor model, this paper examines the impact of four macroeconomic factors namely: Kuala Lumpur Composite Index (KLCI), Industry Production Index (IPI), Consumer Price Index (CPI) and interest rates (IR) on bond yield spread of the Malaysian Government Securities (MGS) and Corporate Bonds (CBs...

  7. Factors Influencing Patronage Of Medical Tourism In Metropolitan Lagos Nigeria

    OpenAIRE

    Omisore; E.O.; Agbabiaka; H. I.

    2015-01-01

    Since medical tourism attract patient from various origin to seek medical services at different destinations it is paramount to consider the factors that motivate patrons decision on medical tourism. Hence this study assesses the factors influencing patronage of medical tourism in Lagos metropolis Nigeria. Lagos State is situated in the southwestern corner of Nigeria it lies within Latitudes 62N to 64N of the Equator and Longitudes 245E to 420E of the Greenwich meridian. Metropolitan Lagos is...

  8. Factors influencing pricing in the accommodation sector in South Africa

    Directory of Open Access Journals (Sweden)

    Engelina du Plessis

    2011-12-01

    Full Text Available Price is a significant factor of competitiveness. Price is a complex issue and is determined by a variety of demand and supply factors. These factors also differ from industry to industry. The purpose of this article is to determine the factors that influence pricing in the South African accommodation sector. In order to generate proper data, a survey was conducted at various South African accommodation establishments that were obtained from the databases of the three major associations in the accommodation sector. Two-hundred and forty seven questionnaires completed by managers from accommodation establishments were used in this research. Principal component factor analyses with Varimax rotation in STATISTICA were carried out. These resulted in ten factors, namely environmental qualities, amenities, image, management factor, positioning, quality service factor, infrastructure service factor, location, marketing and product quality factor. The results revealed that the major factors in pricing are service quality, image and product quality. Consequently this article can be used to assist managers in pricing and in obtaining a better competitive position in the industry by revising management structures and marketing campaigns. Keywords and phrases: Tourism industry, price competitiveness, service quality, image, product quality, entrepreneur and factor analysis

  9. Multilevel factors influencing preterm birth in an urban setting

    Directory of Open Access Journals (Sweden)

    Saba W. Masho

    2014-01-01

    Full Text Available Racial disparity in preterm is a major problem in the US. Although significant strides have been made in identifying some of the risk factors, the complexities between community and individual factors are not understood. This study examines the influence of individual and community level factors affecting preterm birth among Black and White women in an urban setting. A 10-year live birth registry dataset from a mid-sized, racially diverse city was analyzed (N = 30,591. Data were geocoded and merged with block group level Census data. Five hierarchical models were examined using PROC GLIMMIX. Education, illicit drug use, pregnancy complications, previous preterm birth, paternal presence, inadequate and adequate plus prenatal care, and poverty were associated with preterm births in both Blacks and Whites. In Black women, increasing maternal age, maternal smoking, and a previous infant death were significant predictors of preterm births, which was not the case for White women. Residing in medium or high poverty neighborhoods resulted in 19% and 28% higher odds, respectively, of preterm birth for Black women. In addition to individual level factors, neighborhood poverty is an important risk factor influencing preterm birth. It is essential to engage multisectoral agencies in addressing factors influencing preterm birth.

  10. Cerebrospinal Fluid Pressure: Revisiting Factors Influencing Optic Nerve Head Biomechanics

    Science.gov (United States)

    Hua, Yi; Voorhees, Andrew P.; Sigal, Ian A.

    2018-01-01

    Purpose To model the sensitivity of the optic nerve head (ONH) biomechanical environment to acute variations in IOP, cerebrospinal fluid pressure (CSFP), and central retinal artery blood pressure (BP). Methods We extended a previously published numerical model of the ONH to include 24 factors representing tissue anatomy and mechanical properties, all three pressures, and constraints on the optic nerve (CON). A total of 8340 models were studied to predict factor influences on 98 responses in a two-step process: a fractional factorial screening analysis to identify the 16 most influential factors, followed by a response surface methodology to predict factor effects in detail. Results The six most influential factors were, in order: IOP, CON, moduli of the sclera, lamina cribrosa (LC) and dura, and CSFP. IOP and CSFP affected different aspects of ONH biomechanics. The strongest influence of CSFP, more than twice that of IOP, was on the rotation of the peripapillary sclera. CSFP had similar influence on LC stretch and compression to moduli of sclera and LC. On some ONHs, CSFP caused large retrolamina deformations and subarachnoid expansion. CON had a strong influence on LC displacement. BP overall influence was 633 times smaller than that of IOP. Conclusions Models predict that IOP and CSFP are the top and sixth most influential factors on ONH biomechanics. Different IOP and CSFP effects suggest that translaminar pressure difference may not be a good parameter to predict biomechanics-related glaucomatous neuropathy. CON may drastically affect the responses relating to gross ONH geometry and should be determined experimentally. PMID:29332130

  11. The influences of bowel condition with lumbar spine BMD measurement

    International Nuclear Information System (INIS)

    Yoon, Joon; Lee, Hoo Min; Lee, Jung Min; Kwon, Soon Mu; Cho, Hyung Wook; Kim, Yun Min; Kang, Yeong Han; Kim, Boo Soon; Kim, Jung Soo

    2014-01-01

    Bone density measurement use of diagnosis of osteoporosis and it is an important indicator for treatment as well as prevention. But errors in degree of precision of BMD can be occurred by status of patient, bone densitometer and radiological technologist. Therefore the author evaluated that how BMD changes according to the condition of the patient. As Lumbar region, which could lead to substantial effects on bone density by diverse factors such as the water, food, intentional bowels. We recognized a change of bone mineral density in accordance with the height of the water tank and in the presence or absence of the gas using the Aluminum Spine Phantom. We also figured out the influence of bone mineral density by increasing the water and food into a target on the volunteers. Measured bone mineral density through Aluminum Spine Phantom had statistically significant difference accordance with increasing the height of water tank(p=0.026). There was no significant difference in BMD according to the existence of the bowl gas(p=0.587). There was no significant difference in a study of six people targeted volunteers in the presence or absence of the food(p=0.812). And also there was no significant difference according to the existence of water(p=0.618). If it is not difficult to recognize the surround of bone in measuring BMD of lumbar bone, it is not the factor which has the great effect on bone mineral density whether the test is after endoscopic examination of large intestine and patient’s fast or not

  12. The influences of bowel condition with lumbar spine BMD measurement

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, Joon; Lee, Hoo Min; Lee, Jung Min; Kwon, Soon Mu; Cho, Hyung Wook [Dept. of Radiologic Technology, Dongnam Health College, Suwon (Korea, Republic of); Kim, Yun Min; Kang, Yeong Han; Kim, Boo Soon; Kim, Jung Soo [Dept. of Diagonostic Radiology, Samsung Medical Center, Seoul (Korea, Republic of)

    2014-12-15

    Bone density measurement use of diagnosis of osteoporosis and it is an important indicator for treatment as well as prevention. But errors in degree of precision of BMD can be occurred by status of patient, bone densitometer and radiological technologist. Therefore the author evaluated that how BMD changes according to the condition of the patient. As Lumbar region, which could lead to substantial effects on bone density by diverse factors such as the water, food, intentional bowels. We recognized a change of bone mineral density in accordance with the height of the water tank and in the presence or absence of the gas using the Aluminum Spine Phantom. We also figured out the influence of bone mineral density by increasing the water and food into a target on the volunteers. Measured bone mineral density through Aluminum Spine Phantom had statistically significant difference accordance with increasing the height of water tank(p=0.026). There was no significant difference in BMD according to the existence of the bowl gas(p=0.587). There was no significant difference in a study of six people targeted volunteers in the presence or absence of the food(p=0.812). And also there was no significant difference according to the existence of water(p=0.618). If it is not difficult to recognize the surround of bone in measuring BMD of lumbar bone, it is not the factor which has the great effect on bone mineral density whether the test is after endoscopic examination of large intestine and patient’s fast or not.

  13. Infrapopliteal Percutaneous Transluminal Balloon Angioplasty: Clinical Results and Influence Factors

    Energy Technology Data Exchange (ETDEWEB)

    Song, Jang Hyeon; Lee, Seung Jin; Jung, Hye Doo; Lim, Jae Hoon; Chang, Nam Kyu; Yim, Nam Yeol; Kim, Jae Kyu [Dept. of Radiology, Chonnam National University Hospital, Gwangju (Korea, Republic of); Lee, Keun Bae [Dept. of Radiology, Chonnam National University Hospital, Gwangju (Korea, Republic of)

    2011-09-15

    To assess the efficacy of percutaneous transluminal angioplasty (PTA) in patients with infrapopliteal arterial disease, and to determine the influencing factor for prognosis. A total of 55 patients (60 limbs) with infrapopliteal arterial stenosis or occlusion underwent PTA. Atherosclerotic risk factors, clinical symptoms, TransAtlantic Inter-Society Consensus (TASC) classification, and vascular wall calcification were evaluated before PTA. The number of patent infrapopliteal arteries was estimated, and the outcome was evaluated by symptom relief and limb salvage. Technical success was achieved in 53/60 limbs (88.3%) and 81/93 arteries (87.1%), TASC classification (p = 0.038) and vascular calcification (p = 0.002) influenced on technical failure. During follow-up, 26 of 55 limbs (47%) achieved symptom relief and 42/55 limbs (76%) underwent limb salvage. Non-diabetic patients (9/12, 75%) were superior to diabetic patients (17/43, 40%) in terms of symptom relief (p = 0.024). TASC classification and vascular wall calcification influenced on symptom relief and limb salvage. The number of patent infrapopliteal arteries after PTA influenced symptom relief (p < 0.001) and limb amputation (p = 0.003). PTA in patients with chronic critical limb ischemia is worthwhile as a primary treatment. The influence factors should be considered before PTA, and PTA should be performed in as many involved arteries as possible.

  14. Infrapopliteal Percutaneous Transluminal Balloon Angioplasty: Clinical Results and Influence Factors

    International Nuclear Information System (INIS)

    Song, Jang Hyeon; Lee, Seung Jin; Jung, Hye Doo; Lim, Jae Hoon; Chang, Nam Kyu; Yim, Nam Yeol; Kim, Jae Kyu; Lee, Keun Bae

    2011-01-01

    To assess the efficacy of percutaneous transluminal angioplasty (PTA) in patients with infrapopliteal arterial disease, and to determine the influencing factor for prognosis. A total of 55 patients (60 limbs) with infrapopliteal arterial stenosis or occlusion underwent PTA. Atherosclerotic risk factors, clinical symptoms, TransAtlantic Inter-Society Consensus (TASC) classification, and vascular wall calcification were evaluated before PTA. The number of patent infrapopliteal arteries was estimated, and the outcome was evaluated by symptom relief and limb salvage. Technical success was achieved in 53/60 limbs (88.3%) and 81/93 arteries (87.1%), TASC classification (p = 0.038) and vascular calcification (p = 0.002) influenced on technical failure. During follow-up, 26 of 55 limbs (47%) achieved symptom relief and 42/55 limbs (76%) underwent limb salvage. Non-diabetic patients (9/12, 75%) were superior to diabetic patients (17/43, 40%) in terms of symptom relief (p = 0.024). TASC classification and vascular wall calcification influenced on symptom relief and limb salvage. The number of patent infrapopliteal arteries after PTA influenced symptom relief (p < 0.001) and limb amputation (p = 0.003). PTA in patients with chronic critical limb ischemia is worthwhile as a primary treatment. The influence factors should be considered before PTA, and PTA should be performed in as many involved arteries as possible.

  15. Factors Influencing Resilience of Burn Patients in South Korea.

    Science.gov (United States)

    Jang, Mi Heui; Park, Jongui; Chong, Mi Kyong; Sok, Sohyune R

    2017-09-01

    To examine and identify the factors influencing the degree of resilience among Korean burn patients. A cross-sectional descriptive design was employed. The study sample consisted of 138 burn patients recovering from the acute phase in H hospital, Seoul. The male patient participants numbered 93 (67.4%) and the female participants numbered 45 (32.6%). The average age of the participants was 46.79 years. Measures used were the Beck Depression Inventory, State Trait Anxiety Inventory, self-esteem scale, family support scale, and resilience scale. The analyses showed that the prediction model for resilience among burn patients was significant (F = 33.94, p resilience among burn patients was self-esteem (β = .35), followed by family support (β = .29). This study provides preliminary evidence that self-esteem is a major and primary predictor of resilience among burn patients, next followed by family support. In the nursing practice, nurses need to pay attention to the burn patient's self-esteem and family support. Concrete interventions and strategies to improve the resilience of burn patients are needed. © 2017 Sigma Theta Tau International.

  16. Factors influencing hand/eye synchronicity in the computer age.

    Science.gov (United States)

    Grant, A H

    1992-09-01

    In using a computer, the relation of vision to hand/finger actuated keyboard usage in performing fine motor-coordinated functions is influenced by the physical location, size, and collective placement of the keys. Traditional nonprehensile flat/rectangular keyboard applications usually require a high and nearly constant level of visual attention. Biometrically shaped keyboards would allow for prehensile hand-posturing, thus affording better tactile familiarity with the keys, requiring less intense and less constant level of visual attention to the task, and providing a greater measure of freedom from having to visualize the key(s). Workpace and related physiological changes, aging, onset of monocularization (intermittent lapsing of binocularity for near vision) that accompanies presbyopia, tool colors, and background contrast are factors affecting constancy of visual attention to task performance. Capitas extension, excessive excyclotorsion, and repetitive strain injuries (such as carpal tunnel syndrome) are common and debilitating concomitants to computer usage. These problems can be remedied by improved keyboard design. The salutary role of mnemonics in minimizing visual dependency is discussed.

  17. Effect of hemodialysis on factors influencing oxygen transport.

    Science.gov (United States)

    Hirszel, P; Maher, J F; Tempel, G E; Mengel, C E

    1975-06-01

    Ten patients underwent 4 study hemodialyses, one with standard dialysis conditions, one with an isophosphate dialysate, one with simultaneous ammonium chloride loading, and other, after pretreatment, with sodium bicarbonate. Measurement of hemoglobin oxygen affinity (P-50), erythrocyte 2,3-DPG, blood-gasses, and serum chemistries revealed biochemically effective hemodialyses and slight changes in oxygen transport parameters. The P-50 (in vivo) values decreased slightly but significantly (p greater than 0.05) with dialysis. When corrected to pH 7.4, eliminating the Bohr effect, P-50 increased (p greater than 0.05). With unmodified dialysis elevated values of 2,3-DPG (in comparison to normal) decreased, a change that did not correlate with delta-p-50, delta-serum phosphate, or delta-serum creatinine. With standard and isophosphate dialyses Po-2 decreased significantly. The decrease correlated with delta-hydrogen ion concentration and did not occur with dialyses designed to maintain pH constant. Thus, hemodialysis influences many factors that affect oxygen transport in different and counterbalancing directions. These changes are not totally explained by alterations in 2,3-DPG, pH or serum phosphate. Maintenance of acidosis or hyperphosphatemia during dialysis is not recommended.

  18. The influence of the working conditions on the equilibrium factor F and the unattached fraction fp

    International Nuclear Information System (INIS)

    Streil, T.; Reichert, A.

    1998-01-01

    The influence is reported of working conditions on dose estimation, in particular the equilibrium factor and the unattached fraction. For instance in a cabinet-maker's shop the radon concentration is strongly influenced by the ventilation system. The F factor is affected by dust producing work processes. For a better knowledge of radon dosimetry, the unattached fraction of radon progeny has to be measured continuously and separately. Preliminary results are presented obtained with a monitor containing three alpha detector microsystems measuring radon in the air, attached radon daughters and unattached radon daughters. The system was tested in buildings, caves, mines, waterworks and other places

  19. Factors Influencing Adjustment to Late-Life Divorce.

    Science.gov (United States)

    Wilson, Keren Brown; DeShane, Michael R.

    Although the rate of divorce among older Americans has increased steadily, little attention has been paid to late life divorce. To describe the role of age and other factors which might influence adjustment to divorce in later life, data from a larger pilot study were used: 81 divorced persons over the age of 60 completed in-depth, structured…

  20. Investigation and control of factors influencing resistance upset butt welding.

    NARCIS (Netherlands)

    Kerstens, N.F.H.

    2010-01-01

    The purpose of this work is to investigate the factors influencing the resistance upset butt welding process to obtain an understanding of the metal behaviour and welding process characteristics, so that new automotive steels can be welded with reduced development time and fewer failures in

  1. Transcriptional factor influence on OTA production and the quelling ...

    African Journals Online (AJOL)

    This study determined the influence of some transcriptional factors on ochratoxin A production as well as investigates the quelling attributes of some designed siRNA on the OTA producing Aspergillus section Nigri using standard recommended techniques. Results obtained following comparison of the pks gene promoter ...

  2. Factors Influencing Prescribing Practices of Medical Practitioners in ...

    African Journals Online (AJOL)

    the currently used drugs, influence of pharmaceutical sales representatives and inadequate training and professional development [2,7]. Other factors include poor communication between health professional and patients regarding the basic information about the use of drugs. Most of the studies done in Tanzania on this ...

  3. Determinant factors influencing efficiency of Fadama Arable crop ...

    African Journals Online (AJOL)

    ... farm income, output, productivity and farm size and determined factors influencing Fadama farmer's efficiency. The multistage sampling technique was employed in the selection of120 Fadama farmers and their location. One hundred and twenty non-Fadama farmers were drawn using the same technique for comparison.

  4. Analysis of factors influencing adoption of okra production ...

    African Journals Online (AJOL)

    Socio-economic factors influencing adoption of okra technology packages in Enugu State, Nigeria was studied and analyzed in 2012. Purposive and multistage random sampling techniques were used in selecting communities, villages and Okra farmers. The sample size was 90 okra farmers (45Awgu and 45 Aninri Okra ...

  5. Factors Influencing Antenatal Care Service Utilization in Hadiya Zone

    African Journals Online (AJOL)

    Therefore, the objective of this study was to explore factors influencing antenatal care services utilization in Southern Ethiopia. METHODS: A community-based cross sectional study was conducted in Hadiya Zone of Southern Ethiopia from January to February 2009. A multi stage sampling technique was used to select the ...

  6. Factors Influencing Choice of Inguinal Hernia Repair Technique ...

    African Journals Online (AJOL)

    Background: Inguinal hernia repair surgery is one of the most frequently performed surgical procedures worldwide. This study sought to highlight factors that may influence decisions concerning inguinal hernia repair techniques. Methods: This descriptive crosssectional study was carried out in September 2014 among ...

  7. Factors Influencing Household Solid Waste Management in Urban ...

    African Journals Online (AJOL)

    The main objective of this study was to determine factors that influence household solid waste management practices in urban Nyeri Municipality. Descriptive cross- sectional ... Results from the survey showed that 26.2% of households practiced correct methods of household solid waste management. The percentage of ...

  8. Factors Influencing Utilization of Modern Family Planning Services ...

    African Journals Online (AJOL)

    Factors Influencing Utilization of Modern Family Planning Services among Women of Child Bearing Age (15 - 49 years) in the University of Calabar Teaching Hospital, Calabar. ... Using accidental sampling technique, 150 women of childbearing age were selected to constitute the sample. Data were collected using a ...

  9. Pantomime production by people with aphasia. What are influencing factors?

    NARCIS (Netherlands)

    van Nispen, Karin; van de Sandt-Koenderman, Mieke; Mol, Elisabeth; Krahmer, Emiel

    2016-01-01

    Purpose: The present paper aimed to inform clinical practice on whether people with aphasia (PWA) deploy pantomime techniques similarly to non-brain damaged participants (NBDP) and if not, what factors influence these differences. Method: We compared 38 PWA to 20 NBDP in their use of six

  10. Factors Influencing Transient Poverty Among Agro-Pastoralists in ...

    African Journals Online (AJOL)

    Factors Influencing Transient Poverty Among Agro-Pastoralists in semi-arid areas of Kenya. ... The number of livelihood sources, education level of the household head, relief food, extension service and distance to the nearest markets were positively related to per capita daily income. A negative relationship was observed ...

  11. Factors Influencing Vitamin A Status of Lactating Mothers in ...

    African Journals Online (AJOL)

    Factors Influencing Vitamin A Status of Lactating Mothers in Manyara and ... E.L Ndau, D. Walters, D. Wu, N. Saleh, T.C.E. Mosha, S. Horton, H.S. Laswai ... for young mothers, 84.6% for middle age mothers and 86.3% for elderly mothers.

  12. Talking about Relations : Factors Influencing the Production of Relational Descriptions

    NARCIS (Netherlands)

    Baltaretu, Adriana-Alexandra; Krahmer, Emiel; van Wijk, Carel; Maes, Alfons

    2016-01-01

    In a production experiment (Experiment 1) and an acceptability rating one (Experiment 2), we assessed two factors, spatial position and salience, which may influence the production of relational descriptions (such as “the ball between the man and the drawer”). In Experiment 1, speakers were asked to

  13. Factors Influencing BI Data Collection Strategies: An Empirical Investigation

    Science.gov (United States)

    Ramakrishnan, Thiagarajan

    2010-01-01

    The purpose of this dissertation is to examine the external factors that influence an organizations' business intelligence (BI) data collection strategy when mediated by BI attributes. In this dissertation, data warehousing strategies are used as the basis on which to frame the exploration of BI data collection strategies. The attributes include…

  14. Perceived factors influencing the utilization of traditional birth ...

    African Journals Online (AJOL)

    Perceived factors influencing the utilization of traditional birth attendants' services in ... A total of 130 questionnaires were retrieved and analyzed using statistical ... Poverty (p=0.988) and educational level (p =0.133) were not found to be ...

  15. System factors influencing utilisation of Research4Life databases by ...

    African Journals Online (AJOL)

    This is a comprehensive investigation of the influence of system factors on utilisation of Research4Life databases. It is part of a doctoral dissertation. Research4Life databases are new innovative technologies being investigated in a new context – utilisation by NARIs scientists for research. The study adopted the descriptive ...

  16. Determinants of factors influencing technical efficiency of cocoa ...

    African Journals Online (AJOL)

    This study examined the factors influencing technical efficiency of cocoa production in Ondo State, Nigeria using a stochastic frontier production function. Using the random sampling technique, well-structured questionnaire were used to elicit information from 120 cocoa farmers in Ondo State, Nigeria. The mean technical ...

  17. Gender factors influencing technical efficiency of cassava farmers in ...

    African Journals Online (AJOL)

    This work was therefore conducted in Akwa Ibom state to examine factors influencing the technical efficiency of farmer groups in cassava production. In carrying out the study, 120 respondents were randomly selected from two agricultural zones in the State and interviewed with interview schedule. Data were analyzed using ...

  18. Influence Of Socio-Economic Factors On Crop Farmers' Production ...

    African Journals Online (AJOL)

    This paper investigated the influence of socio-economic factors on crop farmers production in Ogba/Egbema/Ndoni Local Government Area of Rivers State. Purposive and stratefied random sampling techniques were used to select the locations of Green River Project, cooperative societies and respondents. Using structured ...

  19. 471 socio-economic factors influencing agricultural radio

    African Journals Online (AJOL)

    Osondu

    The study examined socio economic factors influencing agricultural radio programme FILIN. MAINOMA in ... statistics such as, Pearson Product Moment Correlation Coefficient (PPMC) and Chi-Square analysis. (χ. 2). .... of fish farmers association while one third. (22.22%) ... problems of language barrier and 6.00% of the.

  20. Factors that Influence Women's Technical Skill Development in Outdoor Adventure

    Science.gov (United States)

    Warren, Karen; Loeffler, TA

    2006-01-01

    This article provides a theoretical foundation for understanding women's technical skill development (TSD) in outdoor adventure. An examination of societal and biological factors influencing women's TSD focuses on gender role socialization, sense of competence, technical conditioning, sexism, spatial ability, and risk-taking. The article suggests…

  1. Influence of Sociodemographic Factors on Job Burnout and ...

    African Journals Online (AJOL)

    Influence of Sociodemographic Factors on Job Burnout and Satisfaction among ... (ii) female medical personnel showed significantly greater degree of job satisfaction than ... level of job satisfaction than older employees and, (iv) married employees found significantly more job satisfaction than their unmarried counterparts.

  2. Attitudinal and motivational factors influencing job performance of ...

    African Journals Online (AJOL)

    The study investigated the attitudinal and motivational factors influencing job performance of female extension agents in Edo State, Nigeria. A random sample of 35 female extension agents was selected for the study. Findings reveal that the majority of the respondents (57.1%) were in the age group of 31 – 40 years and ...

  3. Consumers with Major Depressive Disorder: Factors Influencing Job Placement

    Science.gov (United States)

    Hergenrather, Kenneth C.; Haase, Eileen; Zeglin, Robert J.; Rhodes, Scott D.

    2013-01-01

    The theory of planned behavior (TPB) was applied to study the factors that influence the intention of public rehabilitation placement professionals to place consumers with major depressive disorder (MDD) in jobs. A sample of 108 public rehabilitation placement professionals in the Mid-Atlantic region of the United States completed the MDD…

  4. Influence of environmental factors on birth weight variability of ...

    African Journals Online (AJOL)

    The present investigation was carried out to study the influence of environmental factors on the birth weight variability of two breeds of sheep. Animals used in this research were taken from the Pirot and Svrljig indigenous sheep breeds. The data were collected from 1999 to 2009 and were analyzed to determine the effect of ...

  5. Statistical Analysis of the Factors Influencing the Recurrence of ...

    African Journals Online (AJOL)

    Objective To evaluate the risk factors influencing the recurrence of urinary bladder cancer, and to predict the probability of recurrence within two years after radical cystectomy. Patients and Methods Between 1986 and 1994, 857 patients were admitted at the Urology and Nephrology Center of Mansoura University, Egypt, ...

  6. Factors that influence the speed of bacterial wood degradation

    NARCIS (Netherlands)

    Klaassen, R.K.W.M.; Overeem, van B.S.

    2012-01-01

    Bacterial wood decay is a serious threat to the many wooden foundation piles in the Netherlands. In order to learn more about the factors that influence the process of decay, approx. 2000 wood samples taken from Amsterdam piles heads were analysed on type and degree of decay and for 59 extracted

  7. Factors That Influence the Understanding of Good Mathematics Teaching

    Science.gov (United States)

    Leong, Kwan Eu

    2013-01-01

    This study explored the factors that influenced the understanding of good mathematics teaching. A mixed methodology was used investigate the beliefs of beginning secondary teachers on good mathematics teaching. The two research instruments used in this study were the survey questionnaire and an interview. Beginning teachers selected Immediate…

  8. Factors influencing a mother's choice of feeding after discharge of ...

    African Journals Online (AJOL)

    Objective. To assess feeding methods chosen by mothers of babies who spent time in a neonatal unit. Factors influencing this decision were investigated. Design. Descriptive study. Methods. Mothers were interviewed on the day they took their babies home. Basic demographic data on mother and baby were collected from ...

  9. Analysis on Influence Factors of Adaptive Filter Acting on ANC

    Science.gov (United States)

    Zhang, Xiuqun; Zou, Liang; Ni, Guangkui; Wang, Xiaojun; Han, Tao; Zhao, Quanfu

    The noise problem has become more and more serious in recent years. The adaptive filter theory which is applied in ANC [1] (active noise control) has also attracted more and more attention. In this article, the basic principle and algorithm of adaptive theory are both researched. And then the influence factor that affects its covergence rate and noise reduction is also simulated.

  10. Factors Influencing Career Choice of Management Students in India

    Science.gov (United States)

    Agarwala, Tanuja

    2008-01-01

    Purpose: This paper aims to explore the influence of a range of factors on the career choice of management students in India. The importance of different individuals in the family and at work in making career choices among these students is also to be explored. In addition, the study seeks to address the relationship of the cultural values of…

  11. The application of radiolysis and analysis of influencing factors

    International Nuclear Information System (INIS)

    Xie Fang; Ha Yiming; Wang Feng

    2008-01-01

    As a branch of radiation technology, radiolysis technology has been developing in recent years. The update research and application of radiolysis is briefly reviewed. The radiolysis in reducing veterinary drug residues in food, processing plant sources products and environmental management are summaried. The influencing factors or the mechanism and radiolysis products are reviewed. (authors)

  12. Factors That Were Found to Influence Ghanaian Adolescents’ Eating Habits

    OpenAIRE

    Patricia Mawusi Amos; Freda Dzifa Intiful; Laurene Boateng

    2012-01-01

    The study sought to find out whether factors such as parental, peer, and media influences predict Ghanaian adolescent students’ eating habits. A random selection of 150 students from a population of senior high school students in Ghana were asked to complete the Eating Habits Questionnaire for Adolescents. Data were analyzed by the use of bivariate correlation, t test, and multiple regression analytical techniques usin...

  13. External and Internal Factors Influencing Happiness in Elite Collegiate Athletes

    Science.gov (United States)

    Denny, Katherine G.; Steiner, Hans

    2009-01-01

    When under conditions of high demand and allostatic load, are happiness and satisfaction in four domains (family, friends, academics, recreation) influenced more by external or internal factors? Do student-athletes who lead exceedingly complicated lives report happiness as a function of athletic achievement or internal disposition? Stanford…

  14. Factors influencing offspring traits in the oviparous multi-clutched ...

    Indian Academy of Sciences (India)

    Unknown

    Calotes versicolor, a multi-clutched oviparous lizard. (Shanbhag and Prasad ... composes correlation between two variables in to: (i) the direct effect of the first ... color breeding time is the prime factor that influences the clutch mass and egg ...

  15. The Influence of Psychological and Societal Factors on Student ...

    African Journals Online (AJOL)

    The study examined the influence of psychological and societal factors on students' performance in mathematics at Senior Secondary School Level in. Ilorin metropolis of Kwara state. A simple random sampling technique was used to sample three hundred secondary school students who supplied information on the ...

  16. 'Sense of belonging': The influence of individual factors in the ...

    African Journals Online (AJOL)

    Methods. Perceptions of the LE among interns in KwaZulu-Natal, SA, were assessed in December 2015, using a validated version of the Postgraduate ... Intern training programmes in SA need to recognise that individual demographic factors influence interns' perceptions in the context of teaching and mentoring in a ...

  17. Modifiable factors influencing relapses and disability in multiple sclerosis

    NARCIS (Netherlands)

    D'hooghe, M. B.; Nagels, G.; Bissay, V.; De Keyser, J.

    A growing body of literature indicates that the natural course of multiple sclerosis can be influenced by a number of factors. Strong evidence suggests that relapses can be triggered by infections, the postpartum period and stressful life events. Vaccinations against influenza, hepatitis B and

  18. The Modeling of Factors That Influence Coast Guard Manpower Requirements

    Science.gov (United States)

    2014-12-01

    applications, and common data warehouses needed to fully develop an effective and efficient manpower requirements engineering and management program. The... manpower requirements determination ensures a ready force, and safe and effective mission execution. Shortage or excess of manpower is the catalyst...FACTORS THAT INFLUENCE COAST GUARD MANPOWER REQUIREMENTS by Kara M. Lavin December 2014 Thesis Advisor: Ronald E. Giachetti Co-Advisor

  19. Factors influencing career choice after initial training in surgery.

    LENUS (Irish Health Repository)

    McHugh, Seamus

    2011-03-01

    Irish general surgery faces a recruitment crisis with only 87 of 145 (60%) basic surgical training (BST) places filled in 2009. We assessed basic surgical trainees to identify objective, and potentially modifiable, factors that influence ultimate recruitment into a general surgical career.

  20. Hepatitus B virus infection : factors influencing the outcome

    NARCIS (Netherlands)

    J. van Hattum (Jan)

    1986-01-01

    textabstractThis study was designed to find correlations between the various courses of disease after hepatitis B virus (HBV) infection and factors that could conceivably have influenced the course of disease. The aim of the study was to find correlations between parameters of viral replication and

  1. Factors Influencing the Outcomes in Extradural Haematoma Patients

    African Journals Online (AJOL)

    neurosurgical emergencies and are one of the most common causes of mortality and disability after traumatic brain injury. This study aimed at evaluating the current management and factors that influence outcome in patients treated for extradural hematoma in an African setting. Methods: A total of 224 consecutive patients ...

  2. Factors influencing home care nurse intention to remain employed.

    Science.gov (United States)

    Tourangeau, Ann; Patterson, Erin; Rowe, Alissa; Saari, Margaret; Thomson, Heather; MacDonald, Geraldine; Cranley, Lisa; Squires, Mae

    2014-11-01

    To identify factors affecting Canadian home care nurse intention to remain employed (ITR). In developed nations, healthcare continues to shift into community settings. Although considerable research exists on examining nurse ITR in hospitals, similar research related to nurses employed in home care is limited. In the face of a global nursing shortage, it is important to understand the factors influencing nurse ITR across healthcare sectors. A qualitative exploratory descriptive design was used. Focus groups were conducted with home care nurses. Data were analysed using qualitative content analysis. Six categories of influencing factors were identified by home care nurses as affecting ITR: job characteristics; work structures; relationships/communication; work environment; nurse responses to work; and employment conditions. Findings suggest the following factors influence home care nurse ITR: having autonomy; flexible scheduling; reasonable and varied workloads; supportive work relationships; and receiving adequate pay and benefits. Home care nurses did not identify job satisfaction as a single concept influencing ITR. Home care nursing management should support nurse autonomy, allow flexible scheduling, promote reasonable workloads and create opportunities for team building that strengthen supportive relationships among home care nurses and other health team members. © 2013 John Wiley & Sons Ltd.

  3. Factors influencing indoor concentrations of radon and daughter products

    International Nuclear Information System (INIS)

    Wang Hengde

    1985-01-01

    The correlation between indoor concentrations of 222 Rn and its daughters and some influencing factors is discussed and expressions of concentrations are derived with relation to radon exhalation rate from indoor surfaces, air exchange rate and daughter deposition velocities on indoor surfaces. Experimental methods for determining radon exhalation rate, air exchange rate and daughter deposition velocities are also mentioned

  4. International preferences for pork appearance: II. Factors influencing consumer choice

    NARCIS (Netherlands)

    Ngapo, T.M.; Martin, J.F.; Dransfield, E.

    2007-01-01

    The preference for pork varying in its fat cover, lean colour, marbling and drip differs among countries, but the influence of socio-demographic factors is unknown. In this study of 11,717 consumers from 22 countries, more than 80% of consumers liked pork, thought that pork quality was at least

  5. Factors Influencing the College Choice Decisions of Graduate Students.

    Science.gov (United States)

    Kallio, Ruth E.

    1995-01-01

    A study investigated the relative importance of 31 institutional characteristics in 1,068 graduate students' decisions to enroll or not enroll in the institution. Factors having the greatest influence included residency status, quality and other academic environment characteristics, work-related concerns, spouse considerations, financial aid, and…

  6. Factors Influencing Stress, Burnout, and Retention of Secondary Teachers

    Science.gov (United States)

    Fisher, Molly H.

    2011-01-01

    This study examines the stress, burnout, satisfaction, and preventive coping skills of nearly 400 secondary teachers to determine variables contributing to these major factors influencing teachers. Analysis of Variance (ANOVA) statistics were conducted that found the burnout levels between new and experienced teachers are significantly different,…

  7. An Empirical Investment of the Factors Influencing the Adoption of ...

    African Journals Online (AJOL)

    An Empirical Investment of the Factors Influencing the Adoption of Computer Based Auditing in Public Limited Liability Companies in Nigeria. ... information on current issues such as technological development, Keywords: Auditing, Computer based auditing, Information technology. International Journal of Development and ...

  8. What Factors Influence Vietnamese Students' Choice of University?

    Science.gov (United States)

    Dao, Mai Thi Ngoc; Thorpe, Anthony

    2015-01-01

    Purpose: The purpose of this paper is to report the factors that influence Vietnamese students' choice of university in a little researched context where the effects of globalization and education reform are changing higher education. Design/methodology/approach: A quantitative survey was completed by 1,124 current or recently completed university…

  9. Activity limitations and factors influencing functional outcome of ...

    African Journals Online (AJOL)

    EB

    2013-09-03

    Sep 3, 2013 ... life and satisfaction with life1,22. A recent study conducted among community dwelling stroke survivors found functional ability and independence to be the strongest predictor of, and were responsible for the greatest variance on participation22. For determining the factors influencing outcome with the use ...

  10. Factors influencing the choice of surgery as a career by ...

    African Journals Online (AJOL)

    37.5%, p = 0.042). Having surgeons as role models, staff advisers or first degree relatives were significantly associated with selecting a career in surgery. Conclusion: Gender, marital status, having surgeons as role models, staff advisers or first degree relatives in medical school are significant factors influencing the choice ...

  11. Organizational factors influencing successful primary care and public health collaboration.

    Science.gov (United States)

    Valaitis, Ruta; Meagher-Stewart, Donna; Martin-Misener, Ruth; Wong, Sabrina T; MacDonald, Marjorie; O'Mara, Linda

    2018-06-07

    Public health and primary care are distinct sectors within western health care systems. Within each sector, work is carried out in the context of organizations, for example, public health units and primary care clinics. Building on a scoping literature review, our study aimed to identify the influencing factors within these organizations that affect the ability of these health care sectors to collaborate with one another in the Canadian context. Relationships between these factors were also explored. We conducted an interpretive descriptive qualitative study involving in-depth interviews with 74 key informants from three provinces, one each in western, central and eastern Canada, and others representing national organizations, government, or associations. The sample included policy makers, managers, and direct service providers in public health and primary care. Seven major organizational influencing factors on collaboration were identified: 1) Clear Mandates, Vision, and Goals; 2) Strategic Coordination and Communication Mechanisms between Partners; 3) Formal Organizational Leaders as Collaborative Champions; 4) Collaborative Organizational Culture; 5) Optimal Use of Resources; 6) Optimal Use of Human Resources; and 7) Collaborative Approaches to Programs and Services Delivery. While each influencing factor was distinct, the many interactions among these influences are indicative of the complex nature of public health and primary care collaboration. These results can be useful for those working to set up new or maintain existing collaborations with public health and primary care which may or may not include other organizations.

  12. Navigating New Horizons: An Analysis of Factors that Influence ...

    African Journals Online (AJOL)

    The purpose of this study was to assess the factors that influence computer literacy among university students. The study was primarily inspired by the realization that students acquire computer skills at varying levels and progress to use computers with varying proficiency despite the fact that they will be engaging in a ...

  13. Factors influencing energy demand in dairy farming | Kraatz | South ...

    African Journals Online (AJOL)

    The efficiency of energy utilization is one of the key indicators for developing more sustainable agricultural practices. Factors influencing the energy demand in dairy farming are the cumulative energy demand for feed-supply, milk yield as well as the replacement rate of cows. The energy demand of dairy farming is ...

  14. Factors Influencing Exemplary Science Teachers' Levels of Computer Use

    Science.gov (United States)

    Hakverdi, Meral; Dana, Thomas M.; Swain, Colleen

    2011-01-01

    The purpose of this study was to examine exemplary science teachers' use of technology in science instruction, factors influencing their level of computer use, their level of knowledge/skills in using specific computer applications for science instruction, their use of computer-related applications/tools during their instruction, and their…

  15. Factors influencing the job satisfaction of academics in higher ...

    African Journals Online (AJOL)

    These included university context, being employed on a full-time or part-time basis, rank, ethnic group, union membership and gender. Factors causing satisfaction and dissatisfaction were identified. These were sometimes influenced by the above-mentioned demographics. Three-quarters of the sample indicated that, ...

  16. Factors that influence attitudes and sexual behavior among ...

    African Journals Online (AJOL)

    This survey was carried out to assess attitudes and behaviour among youth within four constituencies in Oshana region, Namibia and to understand to how certain social and cultural factors inform attitudes and influence sexual behaviour among the population of young people surveyed. Using a structured questionnaire, ...

  17. Evaluation of the efficacy of factors influencing on marketing SMEs

    Directory of Open Access Journals (Sweden)

    Mona Yaghoubi

    2014-07-01

    Full Text Available This paper presents an empirical investigation to study the effects of different factors influencing on marketing in small and medium enterprises (SMEs in city of Tehran, Iran. The study has been accomplished among 57 SMEs out of 70 active business units who were involved in hand made carpet. The survey uses a questionnaire originally developed by Merrilees et al. (2011 [Merrilees, B., Rundle-Thiele, S., & Lye, A. (2011. Marketing capabilities: Antecedents and implications for B2B SME performance. Industrial Marketing Management, 40(3, 368-375.] to determine the factors influencing on marketing SMEs. Using structural equation modeling, the results of survey indicate that market orientation, management capability, innovation capability and brand capability of SME's marketing performance influence on development of marketing, positively.

  18. Factors influencing the flavour of game meat: A review.

    Science.gov (United States)

    Neethling, J; Hoffman, L C; Muller, M

    2016-03-01

    Flavour is a very important attribute contributing to the sensory quality of meat and meat products. Although the sensory quality of meat includes orthonasal and retronasal aroma, taste, as well as appearance, juiciness and other textural attributes, the focus of this review is primarily on flavour. The influence of species, age, gender, muscle anatomical location, diet, harvesting conditions, ageing of meat, packaging and storage, as well as cooking method on the flavour of game meat are discussed. Very little research is available on the factors influencing the flavour of the meat derived from wild and free-living game species. The aim of this literature review is thus to discuss the key ante- and post-mortem factors that influence the flavour of game meat, with specific focus on wild and free-living South African game species. Copyright © 2015 Elsevier Ltd. All rights reserved.

  19. Factors Influencing Renewable Energy Production & Supply - A Global Analysis

    Science.gov (United States)

    Ali, Anika; Saqlawi, Juman Al

    2016-04-01

    Renewable energy is one of the key technologies through which the energy needs of the future can be met in a sustainable and carbon-neutral manner. Increasing the share of renewable energy in the total energy mix of each country is therefore a critical need. While different countries have approached this in different ways, there are some common aspects which influence the pace and effectiveness of renewable energy incorporation. This presentation looks at data and information from 34 selected countries, analyses the patterns, compares the different parameters and identifies the common factors which positively influence renewable energy incorporation. The most successful countries are analysed for their renewable energy performance against their GDP, policy/regulatory initiatives in the field of renewables, landmass, climatic conditions and population to identify the most influencing factors to bring about positive change in renewable energy share.

  20. The Influence Factors and Mechanism of Societal Risk Perception

    Science.gov (United States)

    Zheng, Rui; Shi, Kan; Li, Shu

    Risk perception is one of important subjects in management psychology and cognitive psychology. It is of great value in the theory and practice to investigate the societal hazards that the public cares a lot especially in Socio-economic transition period. A survey including 30 hazards and 6 risk attributes was designed and distributed to about 2, 485 residents of 8 districts, Beijing. The major findings are listed as following: Firstly, a scale of societal risk perception was designed and 2 factors were identified (Dread Risk & Unknown Risk). Secondly, structural equation model was used to analyze the influence factors and mechanism of societal risk perception. Risk preference, government support and social justice could influence societal risk perception directly. Government support fully moderated the relationship between government trust and societal risk perception. Societal risk perception influenced life satisfaction, public policy preferences and social development belief.

  1. Factors influencing quit attempts among male daily smokers in China.

    Science.gov (United States)

    Zhao, Luhua; Song, Yang; Xiao, Lin; Palipudi, Krishna; Asma, Samira

    2015-12-01

    China has the largest population of smokers in the world, yet the quit rate is low. We used data from the 2010 Global Adult Tobacco Survey China to identify factors influencing quit attempts among male Chinese daily smokers. The study sample included 3303 male daily smokers. To determine the factors that were significantly associated with making a quit attempt, we conducted logistic regression analyses. In addition, mediation analyses were carried out to investigate how the intermediate association among demographics (age, education, urbanicity) and smoking-related variables affected making a quit attempt. An estimated 11.0% of male daily smokers tried to quit smoking in the 12 months prior to the survey. Logistic regression analysis indicated that younger age (15-24 years), being advised to quit by a health care provider (HCP) in the past 12 months, lower cigarette cost per pack, monthly or less frequent exposure to smoking at home, and awareness of the harms of tobacco use were significantly associated with making a quit attempt. Additional mediation analyses showed that having knowledge of the harm of tobacco, exposure to smoking at home, and having been advised to quit by an HCP were mediators of making a quit attempt for other independent variables. Evidence-based tobacco control measures such as conducting educational campaigns on the harms of tobacco use, establishing smoke-free policies at home, and integrating tobacco cessation advice into primary health care services can increase quit attempts and reduce smoking among male Chinese daily smokers. Copyright © 2015 Elsevier Inc. All rights reserved.

  2. Factors influencing quit attempts among male daily smokers in China✩

    Science.gov (United States)

    Zhao, Luhua; Song, Yang; Xiao, Lin; Palipudi, Krishna; Asma, Samira

    2015-01-01

    Background China has the largest population of smokers in the world, yet the quit rate is low. We used data from the 2010 Global Adult Tobacco Survey China to identify factors influencing quit attempts among male Chinese daily smokers. Methods The study sample included 3303 male daily smokers. To determine the factors that were significantly associated with making a quit attempt, we conducted logistic regression analyses. In addition, mediation anal yses were carried out to investigate how the intermediate association among demographics (age, education, urbanicity) and smoking related variables affected making a quit attempt. Results An estimated 11.0% of male daily smokers tried to quit smoking in the 12 months prior to the survey. Logistic regression analysis indicated that younger age (15–24 years), being advised to quit by a health care provider (HCP) in the past 12 months, lower cigarette cost per pack, monthly or less frequent exposure to smoking at home, and awareness of the harms of tobacco use were significantly associated with making a quit attempt. Additional mediation analyses showed that having knowledge of the harm of tobacco, exposure to smoking at home, and having been advised to quit by an HCP were mediators of making a quit attempt for other independent variables. Conclusion Evidence-based tobacco control measures such as conducting educational campaigns on the harms of tobacco use, establishing smoke-free policies at home, and integrating tobacco cessation advice into primary health care services can increase quit attempts and reduce smoking among male Chinese daily smokers. PMID:26441296

  3. Factors influencing obstacle crossing performance in patients with Parkinson's disease.

    Directory of Open Access Journals (Sweden)

    Ying-Yi Liao

    Full Text Available BACKGROUND: Tripping over obstacles is the major cause of falls in community-dwelling patients with Parkinson's disease (PD. Understanding the factors associated with the obstacle crossing behavior may help to develop possible training programs for crossing performance. This study aimed to identify the relationships and important factors determining obstacle crossing performance in patients with PD. METHODS: Forty-two idiopathic patients with PD (Hoehn and Yahr stages I to III participated in this study. Obstacle crossing performance was recorded by the Liberty system, a three-dimensional motion capture device. Maximal isometric strength of the lower extremity was measured by a handheld dynamometer. Dynamic balance and sensory integration ability were assessed using the Balance Master system. Movement velocity (MV, maximal excursion (ME, and directional control (DC were obtained during the limits of stability test to quantify dynamic balance. The sum of sensory organization test (SOT scores was used to quantify sensory organization ability. RESULTS: Both crossing stride length and stride velocity correlated significantly with lower extremity muscle strength, dynamic balance control (forward and sideward, and sum of SOT scores. From the regression model, forward DC and ankle dorsiflexor strength were identified as two major determinants for crossing performance (R(2 = .37 to.41 for the crossing stride length, R(2 = .43 to.44 for the crossing stride velocity. CONCLUSIONS: Lower extremity muscle strength, dynamic balance control and sensory integration ability significantly influence obstacle crossing performance. We suggest an emphasis on muscle strengthening exercises (especially ankle dorsiflexors, balance training (especially forward DC, and sensory integration training to improve obstacle crossing performance in patients with PD.

  4. FACTORS INFLUENCING THE PURCHASE DECISION OF ORGANIC TOFU

    Directory of Open Access Journals (Sweden)

    Tantry Nugroho

    2015-09-01

    Full Text Available This study aimed to analyze the factors that influence consumers in making the decision to buy organic tofu. The theory of factors that influence the purchasing behavior developed by Kotler was used as the analytical tool, and these factors include cultural factors, social factors, personal factors, psychological factors and purchasing process. These data were collected through interview techniques and analyzed descriptively using multinomial logistic regression. The characteristics of respondents indicated the consumers who never bought organic tofu are mostly at the age of 26-35 years old and university graduates, do not work, have an expenditure from Rp 1 million to Rp 2.5 million, are highly knowledge, and have the highest scores on the perceptions on sustainable and environmentally friendly organic farming, health benefits, and a more expensive price. There are a number of factors that influence consumers in making purchase decisions of organic tofu including age, education, knowledge and product external factors. The consumers who are potentially interested in purchasing the organic tofu are at the age of 36–50 years old, university graduates, highly knowledgeable in food and organic tofu products, because the higher the education and knowledge, the greater the interest in buying the products, and they approved of the external products such as price, advertising, personal selling and places of selling which are also potentially equal. The managerial implications for the business agents of tofu organic product is that they must be more active in assuring the consumers that these products are good for them by creating a blog, an ad in the local paper, or a pamphlet containing information of the product.Keywords: purchase decision, logistic regression, organic tofu product, purchasing interest

  5. ON THE MEASUREMENT OF THE {sup 13}C(α, n){sup 16}O S-FACTOR AT NEGATIVE ENERGIES AND ITS INFLUENCE ON THE s-PROCESS

    Energy Technology Data Exchange (ETDEWEB)

    La Cognata, M.; Spitaleri, C.; Trippella, O.; Kiss, G. G.; Guardo, G. L.; Puglia, S. M. R.; Romano, S.; Spartà, R. [Istituto Nazionale di Fisica Nucleare, Laboratori Nazionali del Sud, I-95123, Catania (Italy); Rogachev, G. V.; Avila, M.; Koshchiy, E.; Kuchera, A.; Santiago, D. [Department of Physics, Florida State University, Tallahassee, FL (United States); Mukhamedzhanov, A. M. [Cyclotron Institute, Texas A and M University, College Station, TX (United States); Lamia, L., E-mail: lacognata@lns.infn.it [Dipartimento di Fisica e Astronomia, Università di Catania, I-95123 Catania (Italy)

    2013-11-10

    The {sup 13}C(α, n){sup 16}O reaction is the neutron source for the main component of the s-process, responsible for the production of most of the nuclei in the mass range 90 ∼< A ∼< 208. This reaction takes place inside the helium-burning shell of asymptotic giant branch stars, at temperatures ∼< 10{sup 8} K, corresponding to an energy interval where the {sup 13}C(α, n){sup 16}O reaction is effective in the range of 140-230 keV. In this regime, the astrophysical S(E)-factor is dominated by the –3 keV sub-threshold resonance due to the 6.356 MeV level in {sup 17}O, giving rise to a steep increase in the S-factor. Its contribution is still controversial as extrapolations, e.g., through the R-matrix and indirect techniques such as the asymptotic normalization coefficient (ANC), yield inconsistent results. The discrepancy amounts to a factor of three or more precisely at astrophysical energies. To provide a more accurate S-factor at these energies, we have applied the Trojan horse method (THM) to the {sup 13}C({sup 6}Li, n {sup 16}O)d quasi-free reaction. The ANC for the 6.356 MeV level has been deduced through the THM as well as the n-partial width, allowing us to attain unprecedented accuracy for the {sup 13}C(α, n){sup 16}O astrophysical factor. A larger ANC for the 6.356 MeV level is measured with respect to the ones in the literature, (C-tilde{sub α{sup 1}{sup 3}C}{sup 17O(1/2+)2} = 7.7 ± 0.3{sub stat} {sub -1.5}{sup +1.}|6 norm fm{sup –1}, yet in agreement with the preliminary result given in our preceding letter, indicating an increase of the {sup 13}C(α, n){sup 16}O reaction rate below about 8 × 10{sup 7} K if compared with the recommended values. At ∼10{sup 8} K, our reaction rate agrees with most of the results in the literature and the accuracy is greatly enhanced thanks to this innovative approach.

  6. Direct measurement of aerosol shape factors

    International Nuclear Information System (INIS)

    Zeller, W.

    1983-12-01

    The dynamic shape factor whereas the coagulation shape factor is an average over the total examined size range. The experiments have shown that the results of experiments with a certain aerosol system cannot be transferred to other aerosol systems without further consideration. The outer shape of particles of a certain size depends on the specific properties of the material as well as on the experimental conditions during the aerosol generation. For both aerosol systems examined the mean dynamic shape factor, averaged over the total examined size range, agrees roughly with the coagulation shape factor. (Description of aerosol centrifuge and of differential mobility analyzer). (orig./HP) [de

  7. Biomechanical factors influencing the performance of elite Alpine ski racers.

    Science.gov (United States)

    Hébert-Losier, Kim; Supej, Matej; Holmberg, Hans-Christer

    2014-04-01

    . Investigations on speed skiing (i.e., downhill and super-G) primarily examined the effect of aerodynamic drag on performance, whereas the others examined turn characteristics, energetic principles, technical and tactical skills, and individual traits of high-performing skiers. The range of biomechanical factors reported to influence performance included energy dissipation and conservation, aerodynamic drag and frictional forces, ground reaction force, turn radius, and trajectory of the skis and/or centre of mass. The biomechanical differences between turn techniques, inter-dependency of turns, and abilities of individuals were also identified as influential factors in skiing performance. In the case of slalom and giant slalom events, performance could be enhanced by steering the skis in such a manner to reduce the ski-snow friction and thereby energy dissipated. This was accomplished by earlier initiation of turns, longer path length and trajectory, earlier and smoother application of ground reaction forces, and carving (rather than skidding). During speed skiing, minimizing the exposed frontal area and positioning the arms close to the body were shown to reduce the energy loss due to aerodynamic drag and thereby decrease run times. In actual races, a consistently good performance (i.e., fast time) on different sections of the course, terrains, and snow conditions was a characteristic feature of winners during technical events because these skiers could maximize gains from their individual strengths and minimize losses from their respective weaknesses. Most of the articles reviewed were limited to investigating a relatively small sample size, which is a usual limitation in research on elite athletes. Of further concern was the low number of females studied, representing less than 4% of all the subjects examined in the articles reviewed. In addition, although overall run time is the ultimate measure of performance in alpine ski racing, several other measures of instantaneous

  8. Influence of atmospheric factors on the rheumatic diseases

    Energy Technology Data Exchange (ETDEWEB)

    Latman, N S

    1987-01-01

    This paper reviews the influence of atmospheric factors on rheumatic diseases - rheumatoid arthritis, unspecified arthritis, gout, and systemic lupus erythematosis (SLE). The authors state that there appears to be ample evidence to conclude that various atmospheric factors do exert a significant impact on some people with various rheumatic diseases. The data are, however, crude relative to the authors general understanding. They recommend as a logical progression of research the determination of the effects of the meteorological/atmospheric factors of concern on the specific intrinsic mediators of inflammation.

  9. Influence of Terraced area DEM Resolution on RUSLE LS Factor

    Science.gov (United States)

    Zhang, Hongming; Baartman, Jantiene E. M.; Yang, Xiaomei; Gai, Lingtong; Geissen, Viollette

    2017-04-01

    Topography has a large impact on the erosion of soil by water. Slope steepness and slope length are combined (the LS factor) in the universal soil-loss equation (USLE) and its revised version (RUSLE) for predicting soil erosion. The LS factor is usually extracted from a digital elevation model (DEM). The grid size of the DEM will thus influence the LS factor and the subsequent calculation of soil loss. Terracing is considered as a support practice factor (P) in the USLE/RUSLE equations, which is multiplied with the other USLE/RUSLE factors. However, as terraces change the slope length and steepness, they also affect the LS factor. The effect of DEM grid size on the LS factor has not been investigated for a terraced area. We obtained a high-resolution DEM by unmanned aerial vehicles (UAVs) photogrammetry, from which the slope steepness, slope length, and LS factor were extracted. The changes in these parameters at various DEM resolutions were then analysed. The DEM produced detailed LS-factor maps, particularly for low LS factors. High (small valleys, gullies, and terrace ridges) and low (flats and terrace fields) spatial frequencies were both sensitive to changes in resolution, so the areas of higher and lower slope steepness both decreased with increasing grid size. Average slope steepness decreased and average slope length increased with grid size. Slope length, however, had a larger effect than slope steepness on the LS factor as the grid size varied. The LS factor increased when the grid size increased from 0.5 to 30-m and increased significantly at grid sizes >5-m. The LS factor was increasingly overestimated as grid size decreased. The LS factor decreased from grid sizes of 30 to 100-m, because the details of the terraced terrain were gradually lost, but the factor was still overestimated.

  10. Why neurology? Factors which influence career choice in neurology.

    Science.gov (United States)

    Albert, Dara V; Hoyle, Chad; Yin, Han; McCoyd, Matthew; Lukas, Rimas V

    2016-01-01

    To evaluate the factors which influence the decision to pursue a career in neurology. An anonymous survey was developed using a Likert scale to rate responses. The survey was sent to adult and child neurology faculty, residents and fellows, as well as medical students applying for neurology. Descriptive statistics were used to analyse the factors of influence. Respondents were subsequently categorized into pre-neurology trainees, neurology trainees, child neurologists and adult neurologists, and differences between the groups were analysed using Pearson's chi-square test. One hundred and thirty-three anonymous responses were received. The respondents were neurologists across all levels of training and practice. Across all respondents, the most common factor of high importance was intellectual content of specialty, challenging diagnostic problems, type of patient encountered and interest in helping people. Responses were similar across the groups; however, the earliest trainees cited interest in helping people as most important, while those in neurology training and beyond cite intellectual content of the specialty as most important. As trainees transition from their earliest levels of clinical experience into working as residents and faculty, there is a shift in the cited important factors. Lifestyle and financial factors seem to be the least motivating across all groups. Encouragement from peers, mentors, faculty and practicing physicians is considered high influences in a smaller number of neurologists. This may present an opportunity for practicing neurologists to make connections with medical students early in their education in an effort to encourage and mentor candidates.

  11. A Review of Factors Influencing Athletes' Food Choices.

    Science.gov (United States)

    Birkenhead, Karen L; Slater, Gary

    2015-11-01

    Athletes make food choices on a daily basis that can affect both health and performance. A well planned nutrition strategy that includes the careful timing and selection of appropriate foods and fluids helps to maximize training adaptations and, thus, should be an integral part of the athlete's training programme. Factors that motivate food selection include taste, convenience, nutrition knowledge and beliefs. Food choice is also influenced by physiological, social, psychological and economic factors and varies both within and between individuals and populations. This review highlights the multidimensional nature of food choice and the depth of previous research investigating eating behaviours. Despite numerous studies with general populations, little exploration has been carried out with athletes, yet the energy demands of sport typically require individuals to make more frequent and/or appropriate food choices. While factors that are important to general populations also apply to athletes, it seems likely, given the competitive demands of sport, that performance would be an important factor influencing food choice. It is unclear if athletes place the same degree of importance on these factors or how food choice is influenced by involvement in sport. There is a clear need for further research exploring the food choice motives of athletes, preferably in conjunction with research investigating dietary intake to establish if intent translates into practice.

  12. Important factors influencing the return to work after stroke.

    Science.gov (United States)

    Wang, Ying-Chih; Kapellusch, Jay; Garg, Arun

    2014-01-01

    As the field of rehabilitation shifts its focus towards improving functional capacity instead of managing disability, return to work (RTW) and return to the community emerge as key goals in a person's recovery from major disabling illness such as stroke. To compile important factors believed to influence RTW after a stroke. Based on a comprehensive literature review, we clustered similar factors and organized these factors based on the International Classification of Function, Disability and Health (ICF) framework: body functions or structure, activity participation, environmental factors and personal and psychosocial factors. Overall, stroke severity, as assessed by the degree of residual disability such as weakness, neurological deficit or impairments (speech, cognition, apraxia, agnosia), has been shown to be the most consistent negative predictor of RTW. Many factors such as the number of working years remaining until retirement, depression, medical history, and occupation need to be taken into consideration for stroke survivors, as they can influence RTW decision making. Stroke survivors who are flexible and realistic in their vocational goal and emotionally accept their disability appear more likely to return to work. There are many barriers to employment for stroke survivors ranging from physical and cognitive impairments to psychosocial and environmental factors.

  13. Assessment of the factors with significant influence on safety culture

    International Nuclear Information System (INIS)

    Farcasiu, M.; Nitoi, M.

    2013-01-01

    In this paper, a qualitative and a quantitative evaluation of the factors with significant impact on safety culture were performed. These techniques were established and applied in accordance with IAEA standards. In order to show the applicability and opportunity of the methodology a specific case study was prepared: safety culture evaluation for INR Pitesti. The qualitative evaluation was performed using specific developed questionnaires. Through analysis of the completed questionnaires was established the development stage of safety culture at INR. The quantitative evaluation was performed using a guide to rate the influence factors. For each factor was identified the influence (negative or positive) and ranking score was estimated using scoring criteria. The results have emphasized safety culture stages. The paper demonstrates the fact that using both quantitative and qualitative assessment techniques, a practical value of the safety culture concept is given. (authors)

  14. An empirical investigation on factors influencing on brand loyalty

    Directory of Open Access Journals (Sweden)

    Naser Azad

    2013-07-01

    Full Text Available Building a competitive brand is a key success specially in banking industry. This paper presents a study to investigate important factors influencing brand loyalty among special customers in one of biggest Iranian banks in Iran. The study designs a questionnaire and distributes it among 249 regular customers who are special customers in various banks in city of Tehran, Iran. The study uses structural equation modeling to find important factors and they are ranked using TOPSIS method. In our study, Cronbach alpha has been calculated as 0.815 and there are eight influencing factors including flexibility in offering various services, building good relationship with customers, technology and processes, customers’ experiences, brand identity in continuous advertisement, organization size, customer perception on reputation of brand and customers’ tendency to build better brand loyalty. In our survey, flexibility in offering various services received the highest rank followed by building good relationship with customers.

  15. Consumer's Online Shopping Influence Factors and Decision-Making Model

    Science.gov (United States)

    Yan, Xiangbin; Dai, Shiliang

    Previous research on online consumer behavior has mostly been confined to the perceived risk which is used to explain those barriers for purchasing online. However, perceived benefit is another important factor which influences consumers’ decision when shopping online. As a result, an integrated consumer online shopping decision-making model is developed which contains three elements—Consumer, Product, and Web Site. This model proposed relative factors which influence the consumers’ intention during the online shopping progress, and divided them into two different dimensions—mentally level and material level. We tested those factors with surveys, from both online volunteers and offline paper surveys with more than 200 samples. With the help of SEM, the experimental results show that the proposed model and method can be used to analyze consumer’s online shopping decision-making process effectively.

  16. Influence of crosstalk phenomenon on the measurement of gross alpha and gross beta radioactivity in drinking water

    International Nuclear Information System (INIS)

    Gerilemandahu; Haribala; Xu Xiao; Shen Na; Sai Wenga; Bai Guilin; Wang Chengguo

    2014-01-01

    Objective: To study the influence of crosstalk phenomenon on the measurement of gross radioactivity in drinking water. Methods: The gross activity in different standard materials with different thickness and area was measured using national standard method. Results: There was no obvious change in crosstalk factor with the increase of "2"4"1Am powder amount in the measurement, whereas the larger amount of uranium used might lead to larger crosstalk factor. The different measurement channels resulted in different crosstalk factors. The influence of beta radioactivity on alpha radioactivity measurement was significant. On the contrary, the alpha-to-beta crosstalk factor was negligible. The area of sample plate imposed no significant influence on crosstalk factor. Conclusions: The gross beta activity can be corrected to decrease the influence of alpha radioactivity using powder standard samples, when simultaneous alpha and beta counting mode is applied in measurement grass radioactivity in drinking water. (authors)

  17. An exploration study on factors influencing Iranian food industry

    Directory of Open Access Journals (Sweden)

    Arash Hosseinzadeh

    2013-05-01

    Full Text Available The proposed study of this paper present an empirical investigation to detect important factors impacting on food market using factor analysis. The proposed study designed a questionnaire, distributed among 207 customers who were regular customers of two food chains in city of Tehran, Iran named Shahrvand and Hyperstar. The results of our survey indicate that six major factors including brand loyalty, physical characteristics, pricing effects, performance characteristics, brand relationship and brand position influence food industry, significantly. In terms of the first factor, brand loyalty, “Trust”, “Packaging design characteristics”, “Competitive pricing strategy”, “Stability in quality”, “External relationships” and “Meeting expectations” are important factors in different categories.

  18. Factors Influencing Patronage Of Medical Tourism In Metropolitan Lagos Nigeria

    Directory of Open Access Journals (Sweden)

    Omisore

    2015-08-01

    Full Text Available Since medical tourism attract patient from various origin to seek medical services at different destinations it is paramount to consider the factors that motivate patrons decision on medical tourism. Hence this study assesses the factors influencing patronage of medical tourism in Lagos metropolis Nigeria. Lagos State is situated in the southwestern corner of Nigeria it lies within Latitudes 62N to 64N of the Equator and Longitudes 245E to 420E of the Greenwich meridian. Metropolitan Lagos is a statistical division and not an administrative unit it extends over 16 of the 20 LGAs of Lagos State it contains 88 of the population of Lagos State and includes semi-rural areas. Data were collected from primary source. Primary data collection was carried out through the use of structured questionnaire. Systematic sampling technique was employed to select 15 specialized private hospitals and 14 Public hospitals in the study area resulting to a sample size of 29 hospitals. Ten 10 patrons were contacted in each of the selected hospitals consequently 290 patrons were sampled. The study revealed three factors influencing patronage of medical tourism in the study area to be service related economic and facilities. These were further established by factor analysis result which combine service related economic factor as factor one with 29.5 variance explained and Eigen value of 5.605 Facility factor as factor two with 28.6 variance explained and Eigen value of 5.435 Service related factor as factor three with 14.7 variance explained and Eigen value of 2.788 and Economic factor as factor four with 9.2 variance explained and Eigen value of 1.754. The relevant authority in charge of health facilities in the study area would have to employ adequate manpower in-terms of doctors and other healthcare personnel across the public hospital while also regulating the scale of charges of the registered private hospitals in the study area. There is need to improve upon the

  19. High mechanical Q-factor measurements on silicon bulk samples

    Energy Technology Data Exchange (ETDEWEB)

    Nawrodt, R; Zimmer, A; Koettig, T; Schwarz, C; Heinert, D; Hudl, M; Neubert, R; Thuerk, M; Nietzsche, S; Vodel, W; Seidel, P [Friedrich-Schiller-Universitaet, Institut fuer Festkoerperphysik, Helmholtzweg 5, D-07743 Jena (Germany); Tuennermann, A [Friedrich-Schiller-Universitaet, Institut fuer Angewandte Physik, Max-Wien-Platz 1, D-07743 Jena (Germany)], E-mail: ronny.nawrodt@uni-jena.de

    2008-07-15

    Future gravitational wave detectors will be limited by different kinds of noise. Thermal noise from the coatings and the substrate material will be a serious noise contribution within the detection band of these detectors. Cooling and the use of a high mechanical Q-factor material as a substrate material will reduce the thermal noise contribution from the substrates. Silicon is one of the most interesting materials for a third generation cryogenic detector. Due to the fact that the coefficient of thermal expansion vanishes at 18 and 125 K the thermoelastic contribution to the thermal noise will disappear. We present a systematic analysis of the mechanical Q-factor at low temperatures between 5 and 300 K on bulk silicon (100) samples which are boron doped. The thickness of the cylindrical samples is varied between 6, 12, 24, and 75mm with a constant diameter of 3 inches. For the 75mm substrate a comparison between the (100) and the (111) orientation is presented. In order to obtain the mechanical Q-factor a ring-down measurement is performed. Thus, the substrate is excited to resonant vibrations by means of an electrostatic driving plate and the subsequent ring-down is recorded using a Michelson-like interferometer. The substrate itself is suspended as a pendulum by means of a tungsten wire loop. All measurements are carried out in a special cryostat which provides a temperature stability of better than 0.1K between 5 and 300K during the experiment. The influence of the suspension on the measurements is experimentally investigated and discussed. At 5.8K a highest Q-factor of 4.5 x 10{sup 8} was achieved for the 14.9 kHz mode of a silicon (100) substrate with a diameter of 3 inches and a thickness of 12 mm.

  20. Factors Influencing the Effectiveness of Inventory Management in Manufacturing SMEs

    Science.gov (United States)

    Chan, Shiau Wei; Tasmin, R.; Nor Aziati, A. H.; Zuraidah Rasi, Raja; Ismail, Fadillah Binti; Yaw, Li Ping

    2017-08-01

    Effectiveness of inventory management is a vital part in the manufacturing organization to be more competitive. The previous studies have indicated that there are several factors influencing the effectiveness of inventory management in the organization but there is lack of researchers who carried out the research in the manufacturing small medium enterprise in Johor. Therefore, the purpose of this research is to identify the problem of inventory management faced by the manufacturing small medium enterprise and also to determine the factors that will influence the effectiveness of inventory management. In completing this research, 80 employees were selected randomly from the manufacturing small medium enterprise in Batu Pahat, Johor and they were requested to complete questionnaires. The result have shown that the problems of inventory management faced by manufacturing organization were underproduction, overproduction, stock out situation, delays in the delivery of raw materials and discrepancy of records. The factors, documentation/store records, planning, knowledge of employees/staff skill have shown to significantly influence the effectiveness of inventory management while the funds have shown slightly significant influence on the inventory management in manufacturing small medium enterprises. This quantitative study is important to the manufacturing organization in Malaysia because it provides the guidelines to the employers of manufacturing small medium enterprises in Batu Pahat, Johor.

  1. HEC influence on cement hydration measured by conductometry

    OpenAIRE

    Pourchez , Jérémie; Grosseau , Philippe; Guyonnet , René; Ruot , Bertrand

    2006-01-01

    International audience; Cellulose ethers are of universal use in factory-made mortars, though their influences on mortar properties at a molecular scale are poorly understood. Recent studies dealt with the influence of hydroxyethylmethyl cellulose (HEMC) and hydroxypropylmethyl cellulose (HPMC) molecular parameters on cement hydration. It was concluded that the degree of substitution is the most relevant factor on cement hydration kinetics, contrary to the molecular weight. Nevertheless, the ...

  2. Risk factors influencing the pleural drainage volume after transthoracic oesophagectomy.

    Science.gov (United States)

    Kosugi, Shin-ichi; Kanda, Tatsuo; Yajima, Kazuhito; Ishikawa, Takashi; Sakamoto, Kaoru

    2013-06-01

    The objective of this study was to clarify the factors influencing pleural drainage volume after transthoracic oesophagectomy and to determine criteria for the selection of patients who would benefit from the early removal of chest drains. Clinicopathological characteristics of 155 patients who underwent transthoracic oesophagectomy were prospectively collected, and the daily drainage volume of each patient was retrospectively reviewed. Potential risk factors were compared between the high-output group (n = 39) and low-output group (n = 116), which were dichotomized using the 75th percentile of total pleural drainage volume of the total study population. Multivariate logistic regression analyses were used to identify independent risk factors. The median duration of drainage was 10 days, with a median total drainage volume of 2258 ml. Of 27 potential risk factors influencing the drainage volume, creatinine clearance (P = 0.04), operative approach (P = 0.03) and thoracic duct removal (P = 0.01) were significantly associated with the total pleural drainage volume. The removal of the thoracic duct (P = 0.02; odds ratio, 4.02; 95% confidence interval 1.20-13.41) and lower creatinine clearance (P = 0.04; odds ratio, 1.02; 95% confidence interval 1.00-1.04) was independent risk factors for increased pleural drainage volume after transthoracic oesophagectomy. The early removal of chest drains may be possible in patients without these risk factors.

  3. Factors influencing societal response of nanotechnology: an expert stakeholder analysis

    Energy Technology Data Exchange (ETDEWEB)

    Gupta, Nidhi, E-mail: nidhi.gupta@wur.nl; Fischer, Arnout R. H., E-mail: arnout.fischer@wur.nl; Lans, Ivo A. van der, E-mail: Ivo.vanderLans@wur.nl [Wageningen University, Marketing and Consumer Behaviour Group (Netherlands); Frewer, Lynn J., E-mail: lynn.frewer@newcastle.ac.uk [Newcastle University, School of Agriculture, Food and Rural Development (United Kingdom)

    2012-05-15

    Nanotechnology can be described as an emerging technology and, as has been the case with other emerging technologies such as genetic modification, different socio-psychological factors will potentially influence societal responses to its development and application. These factors will play an important role in how nanotechnology is developed and commercialised. This article aims to identify expert opinion on factors influencing societal response to applications of nanotechnology. Structured interviews with experts on nanotechnology from North West Europe were conducted using repertory grid methodology in conjunction with generalized Procrustes analysis to examine the psychological constructs underlying societal uptake of 15 key applications of nanotechnology drawn from different areas (e.g. medicine, agriculture and environment, chemical, food, military, sports, and cosmetics). Based on expert judgement, the main factors influencing societal response to different applications of nanotechnology will be the extent to which applications are perceived to be beneficial, useful, and necessary, and how 'real' and physically close to the end-user these applications are perceived to be by the public.

  4. Factors influencing societal response of nanotechnology: an expert stakeholder analysis

    International Nuclear Information System (INIS)

    Gupta, Nidhi; Fischer, Arnout R. H.; Lans, Ivo A. van der; Frewer, Lynn J.

    2012-01-01

    Nanotechnology can be described as an emerging technology and, as has been the case with other emerging technologies such as genetic modification, different socio-psychological factors will potentially influence societal responses to its development and application. These factors will play an important role in how nanotechnology is developed and commercialised. This article aims to identify expert opinion on factors influencing societal response to applications of nanotechnology. Structured interviews with experts on nanotechnology from North West Europe were conducted using repertory grid methodology in conjunction with generalized Procrustes analysis to examine the psychological constructs underlying societal uptake of 15 key applications of nanotechnology drawn from different areas (e.g. medicine, agriculture and environment, chemical, food, military, sports, and cosmetics). Based on expert judgement, the main factors influencing societal response to different applications of nanotechnology will be the extent to which applications are perceived to be beneficial, useful, and necessary, and how 'real' and physically close to the end-user these applications are perceived to be by the public.

  5. Factors that influence the relative use of multiple memory systems.

    Science.gov (United States)

    Packard, Mark G; Goodman, Jarid

    2013-11-01

    Neurobehavioral evidence supports the existence of at least two anatomically distinct "memory systems" in the mammalian brain that mediate dissociable types of learning and memory; a "cognitive" memory system dependent upon the hippocampus and a "stimulus-response/habit" memory system dependent upon the dorsolateral striatum. Several findings indicate that despite their anatomical and functional distinctiveness, hippocampal- and dorsolateral striatal-dependent memory systems may potentially interact and that, depending on the learning situation, this interaction may be cooperative or competitive. One approach to examining the neural mechanisms underlying these interactions is to consider how various factors influence the relative use of multiple memory systems. The present review examines several such factors, including information compatibility, temporal sequence of training, the visual sensory environment, reinforcement parameters, emotional arousal, and memory modulatory systems. Altering these parameters can lead to selective enhancements of either hippocampal-dependent or dorsolateral striatal-dependent memory, and bias animals toward the use of either cognitive or habit memory in dual-solution tasks that may be solved adequately with either memory system. In many learning situations, the influence of such experimental factors on the relative use of memory systems likely reflects a competitive interaction between the systems. Research examining how various factors influence the relative use of multiple memory systems may be a useful method for investigating how these systems interact with one another. Copyright © 2013 Wiley Periodicals, Inc.

  6. THE INFLUENCE OF CORPORATE SPECIFIC FACTORS UPON FINANCING DECISIONS

    Directory of Open Access Journals (Sweden)

    Lacatus Viorel-Dorin

    2013-07-01

    Full Text Available The purpose of this paper is to analyze the existing theories for the capital structure of a corporation and to determine the factors that influence the financing decisions of Romanian corporations. The gearing ratios vary a lot among Romanian corporations pointing out the fact that the internal specific factors are the ones with a greater impact upon their capital structure, and not the external factors. Our empiric research evaluates the determining factors for the debt ratio (total debt/total assets of some Romanian corporations, focusing on its explanatory variables by including them within simple and multiple econometric models. The panel data indicators computed for the companies in the Cluj area listed on the Bucharest Stock Exchange were evaluated with the OLS and FEM techniques.The results have been interpreted, pointing out that company size and asset turnover seem to have a positive influence upon the debt ratio of selected companies, while profitability and liquidity seem to influence the debt ratio of selected companies negatively.

  7. Factors that influence on the decisions of battered women

    Directory of Open Access Journals (Sweden)

    Juana Robledo Martín

    2008-01-01

    Full Text Available Violence towards and against women consists in any kind of violation of woman’s personality, her physical integrity or her freedom of movement. Nowadays, gender-based violence is considered a state and public health problem as well as a social concerning subject.Objective: To identify the factors that influence on the decisions that battered women make.Methodology: The study population are battered women who live in Madrid province and who are being attended in the Municipal Points of the Regional Observatory against the Gender Violence.The information was collected by performing focus groups and deep interviews.Results: There are several factors which influence on the decisions that battered women make, like the existence or not of children they have to take care of, the economic dependence and the ignorance of the woman, in some cases, of the existence of this ill-treatment, but over all, we could even say beyond all these, there is one that is the most important, common and we could say it is the main axis that determine their behaviour. This factor is fear.Discussion: When attending these women we may be aware of the psychological situation they are, and we should be able to identify if the woman is asking us for help when she comes to us and try to identify and treat this factor that influences the decisions the woman we attend makes.

  8. Factors influencing societal response of nanotechnology: an expert stakeholder analysis

    Science.gov (United States)

    Gupta, Nidhi; Fischer, Arnout R. H.; van der Lans, Ivo A.; Frewer, Lynn J.

    2012-05-01

    Nanotechnology can be described as an emerging technology and, as has been the case with other emerging technologies such as genetic modification, different socio-psychological factors will potentially influence societal responses to its development and application. These factors will play an important role in how nanotechnology is developed and commercialised. This article aims to identify expert opinion on factors influencing societal response to applications of nanotechnology. Structured interviews with experts on nanotechnology from North West Europe were conducted using repertory grid methodology in conjunction with generalized Procrustes analysis to examine the psychological constructs underlying societal uptake of 15 key applications of nanotechnology drawn from different areas (e.g. medicine, agriculture and environment, chemical, food, military, sports, and cosmetics). Based on expert judgement, the main factors influencing societal response to different applications of nanotechnology will be the extent to which applications are perceived to be beneficial, useful, and necessary, and how 'real' and physically close to the end-user these applications are perceived to be by the public.

  9. Factors influencing user ability to retrieve information from the ...

    African Journals Online (AJOL)

    A sa mple size of 500 users and 12 librarians was selected from a study population of 5012 using stratified/simple random Sampling techniques. Two four - point likert-type questionnaires measuring three (3 ) variables that influence user ability to retrieve info rmation were developed, validated and administered.

  10. The influence of chemical degradation during dietary exposures to fish on biomagnification factors and bioaccumulation factors.

    Science.gov (United States)

    Arnot, Jon A; Mackay, Donald

    2018-01-24

    The chemical dietary absorption efficiency (E D ) quantifies the amount of chemical absorbed by an organism relative to the amount of chemical an organism is exposed to following ingestion. In particular, E D can influence the extent of bioaccumulation and biomagnification for hydrophobic chemicals. A new E D model is developed to quantify chemical process rates in the gastrointestinal tract (GIT). The new model is calibrated with critically evaluated measured E D values (n = 250) for 80 hydrophobic persistent chemicals. The new E D model is subsequently used to estimate chemical reaction rate constants (k R ) assumed to occur in the lumen of the GIT from experimental dietary exposure tests (n = 255) for 165 chemicals. The new k R estimates are corroborated with k R estimates for the same chemicals from the same data derived previously by other methods. The roles of k R and the biotransformation rate constant (k B ) on biomagnification factors (BMFs) determined under laboratory test conditions and on BMFs and bioaccumulation factors (BAFs) in the environment are examined with the new model. In this regard, differences in lab and field BMFs are highlighted. Recommendations to address uncertainty in E D and k R data are provided.

  11. Factor Influencing Creative Industries Development in Kenjeran Surabaya

    Science.gov (United States)

    Siswanto, V. K.; Santoso, E. B.

    2017-07-01

    Indonesia needs to improve the competitiveness of local products to optimize its contribution to the ASEAN Economic Community (AEC) for the welfare of the population. This can be done by improving the development of creative industries. Kenjeran Sub District is one of the coastal villages in the city of Surabaya, which has a large number of poor people. The potential of the creative industries is still not visible in efforts to increase public welfare. Therefore, it is necessary to investigate the factors that influence the development of creative industries in Kenjeran. This study using in-depth interview were analysed using content analysis and Cartesian diagram to determine the important factors that affect the development of creative industries in Sub district of Kenjeran. By using five respondents from the government shows that the factors that have a high level of importance and advantages are low among other regulatory factors of raw materials, import and export, extortion, and administrative procedures.

  12. Succesful Lean Manufacturing Implementation: Internal Key Influencing Factors

    Science.gov (United States)

    Virginia, Iuga; Claudiu, Kifor

    2015-09-01

    Manufacturing sectors and companies all over the world are successfully implementing lean principles within their processes. Nowadays, lean has become an indispensable part of global players. Companies worldwide need to be aware of multiple factors which weigh heavily on the success or failure of lean implementation. This paper focuses on giving a brief and structured overview over the fundamental organizational factors which play a substantial role for the lean manufacturing (LM) implementation process. The study below focuses on internal factors which are indispensable for a successful LM implementation within organizations. It is imperative that these internal factors are known, recognized and taken into consideration during the whole LM implementation process. Ignoring their influence on the process's implementation may lead to endangering the expected results or to making the process more difficult which could result in much higher human resource consumption.

  13. External and internal factors influencing happiness in elite collegiate athletes.

    Science.gov (United States)

    Denny, Katherine G; Steiner, Hans

    2009-03-01

    When under conditions of high demand and allostatic load, are happiness and satisfaction in four domains (family, friends, academics, recreation) influenced more by external or internal factors? Do student-athletes who lead exceedingly complicated lives report happiness as a function of athletic achievement or internal disposition? Stanford student-athletes (N=140) were studied with a standardized questionnaire which examined internal factors ((1) locus of control, (2) mindfulness, (3) self-restraint, and (4) self-esteem) to see whether they better account for happiness than external factors (playing time, scholarship). As predicted, internal factors were more powerful correlates of happiness when holding constant demographics. Regression models differed for different aspects of happiness, but the main postulated result of internal versus external was maintained throughout. These findings have implications for how well athletes cope with adversity which, in turn, could shed light on the development of traits that may provide a buffer against adversity and build resilience.

  14. An exploration study to detect important factors influencing insurance firms

    Directory of Open Access Journals (Sweden)

    Farzaneh Soleimani

    2013-11-01

    Full Text Available The recent trend on competition among insurance firms has increased motivation to look for important factors influencing this industry. In this paper, we present an empirical investigation to find important factors shaping this industry. The proposed study designs a questionnaire in Likert scale and, using principal component analysis, detects important factors on the success of this industry. Cronbach alpha is calculated as 0.849, and Kaiser-Meyer-Olkin and Bartlett's Test are calculated as 0.873 and 12744 with (Sig. =0.000, respectively. The study has detected four important factors including quality of service casualties, sales improvement and advertisement, quality of issuance of insurance policies and quality of work force.

  15. An exploration study on factors influencing green marketing

    Directory of Open Access Journals (Sweden)

    Mojtaba Esmaeeli

    2013-05-01

    Full Text Available These days, there have been tremendous efforts on offering products, which are environment friendly. Green marketing plays an important role for attracting new customer and customer retention. This paper presents an empirical investigation based on the implementation of factor analysis to locate important factors influencing green marketing planning and strategies. building market oriented business units. The study designs a questionnaire including 23 questions and the questionnaire was distributed among 200 people who were visiting organic product exhibition. Cronbach alpha was calculated as 0.845, which is well above the minimum acceptable limit and validates the results. The results of factor analysis reveal four major factors including green labeling, compatibility, product value and marketing component and size.

  16. Factors that Influence RF Breakdown in Antenna Systems

    Science.gov (United States)

    Caughman, J. B. O.; Baity, F. W.; Rasmussen, D. A.; Aghazarian, M.; Castano Giraldo, C. H.; Ruzic, David

    2007-11-01

    One of the main power-limiting factors in antenna systems is the maximum voltage that the antenna or vacuum transmission line can sustain before breaking down. The factors that influence RF breakdown are being studied in a resonant 1/4-wavelength section of vacuum transmission line terminated with an open circuit electrode structure. Breakdown can be initiated via electron emission by high electric fields and by plasma formation in the structure, depending on the gas pressure. Recent experiments have shown that a 1 kG magnetic field can influence plasma formation at pressures as low as 8x10-5 Torr at moderate voltage levels (LLC, for the U.S. Dept. of Energy under contract DE-AC05-00OR22725. Work supported by USDOE with grant DE-FG02-04ER54765

  17. INVESTIGATING FACTORS INFLUENCING STUDENTS’ LEARNING IN A TEAM TEACHING SETTING

    Directory of Open Access Journals (Sweden)

    Brenda

    2015-12-01

    Full Text Available Team teaching factors, including mission clarity, affiliation, innovativeness, and fairness, are examined to determine how they influence student learning in a team-taught course. The study involved 184 college students enrolled in an Introduction to Computers course delivered in a team-taught format in a large university located in the United States. The collaborative teaching design followed a traditional team teaching approach with an instructor team teaching the same course collaboratively. Students enrolled in the team-taught course filled out an online survey targeted at identifying key factors that influence student-based outcomes (satisfaction and competency in the course. Results showed that instructor team mission clarity, affiliation, and fairness are significantly related to students’ satisfaction while instructor team mission clarity and fairness are significantly related to students’ competency.

  18. Iranian nurses self-perception -- factors influencing nursing image.

    Science.gov (United States)

    Varaei, Shokoh; Vaismoradi, Mojtaba; Jasper, Melanie; Faghihzadeh, Soghrat

    2012-05-01

    The purpose of this study was to describe the perspectives of Iranian nurses regarding factors influencing nursing image. Nursing image is closely tied to the nurse's role and identity, influencing clinical performance, job satisfaction and quality of care. Images of nursing and nurses are closely linked to the cultural context in which nursing is practised, hence, this study explores how Iranian nurses perceive the factors that influence their own image. A descriptive study using a survey design was conducted with 220 baccalaureate qualified nurses working in four teaching hospitals in an urban area of Iran. A Nursing Image Questionnaire was used and analysed using descriptive and inferential statistics. In the domains of 'characteristics required for entry to work', 'social role characteristics of nursing' and 'prestige, economic and social status, and self image' the nurses had negative images. 'Reward' and 'opportunity for creativity and originality' were factors that least influenced choosing nursing as a career. The presence of a nurse in the family and working in the hospital had the greatest impact on the establishment of nurses' nursing image. Improving the nursing profession's prestige and social position as well as providing the opportunity for creativity and originality in nursing practice will change the self-image of Iranian nurses, facilitating effective and lasting changes in nursing's image. Nurse managers are well-placed to influence nurses' perceptions of nursing's image. Given the finding that thinking about leaving a job positively correlates with holding a negative nursing image, nurse managers need to consider how they can work effectively with their staff to enhance morale and nurses' experience of their job. © 2012 Blackwell Publishing Ltd.

  19. Customer Segmentation by Factors Influencing Brand Loyalty and Customer Involvement

    Directory of Open Access Journals (Sweden)

    Tereza Vebrová

    2016-01-01

    Full Text Available Brand loyalty and customer involvement are two important concepts that help explain and understand a significant part of consumer shopping behavior. The aim of the present work is to identify factors influencing brand loyalty and customer involvement. A further aim is to consider subsequent segmentation of customers with respect to different degrees of brand loyalty and customer involvement. The research was focused on the field of Czech telecommunication services – mobile operators. Primary data were acquired through the method of questionnaire survey. In total, the questionnaire was completed by 340 respondents, of which 319 respondents owned their mobile phones for private purposes only. For more accurate interpretation of the identified factors the Exploratory Factor Analysis method was used. Four factors of brand loyalty were extracted, which account for 75 % of the variability of the original parameters: (1 Cognitive affective loyalty, (2 Trustworthiness, (3 Attitudinal loyalty and (4 Commitment and three factors of customer involvement were found to account for 71 % variability of the original parameters: (1 Social involvement, (2 Centrality, (3 Importance. High loyalty customers mostly have only one SIM card and 73 % of them use a tariff. In a further group of highly involved customers own from 80 % only one SIM card. This study forms part of a research programme investigating the influence of customer involvement on brand loyalty.

  20. [Analysis of influencing factors of snow hyperspectral polarized reflections].

    Science.gov (United States)

    Sun, Zhong-Qiu; Zhao, Yun-Sheng; Yan, Guo-Qian; Ning, Yan-Ling; Zhong, Gui-Xin

    2010-02-01

    Due to the need of snow monitoring and the impact of the global change on the snow, on the basis of the traditional research on snow, starting from the perspective of multi-angle polarized reflectance, we analyzed the influencing factors of snow from the incidence zenith angles, the detection zenith angles, the detection azimuth angles, polarized angles, the density of snow, the degree of pollution, and the background of the undersurface. It was found that these factors affected the spectral reflectance values of the snow, and the effect of some factors on the polarization hyperspectral reflectance observation is more evident than in the vertical observation. Among these influencing factors, the pollution of snow leads to an obvious change in the snow reflectance spectrum curve, while other factors have little effect on the shape of the snow reflectance spectrum curve and mainly impact the reflection ratio of the snow. Snow reflectance polarization information has not only important theoretical significance, but also wide application prospect, and provides new ideas and methods for the quantitative research on snow using the remote sensing technology.

  1. Study of Influencing Factors on ConsumerOnline Impulse Buying

    Institute of Scientific and Technical Information of China (English)

    2015-01-01

    The convenience and anonymity of online shopping have stimulated people's impulse buying tendency. Impulse buying is notonly a competitive method for businesses, but also a crucial factor influencing sales of e-commerce. Based on a systematic reviewof literatures, this paper explores factors affecting the online impulse buying. Moreover, by using the S-O-R model, this paperdescribes the formation mechanism of the online impulse buying behavior. At Last, it points out issues worthy of future studies.For example, this paper suggests to take into consideration of sociocultural impact and to put more emphasis on empirical studies.

  2. Children's disaster reactions: the influence of family and social factors.

    Science.gov (United States)

    Pfefferbaum, Betty; Jacobs, Anne K; Houston, J Brian; Griffin, Natalie

    2015-07-01

    This review examines family (demographics, parent reactions and interactions, and parenting style) and social (remote effects, disaster media coverage, exposure to secondary adversities, and social support) factors that influence children's disaster reactions. Lower family socioeconomic status, high parental stress, poor parental coping, contact with media coverage, and exposure to secondary adversities have been associated with adverse outcomes. Social support may provide protection to children in the post-disaster environment though more research is needed to clarify the effects of certain forms of social support. The interaction of the factors described in this review with culture needs further exploration.

  3. The Influence of Presession Factors in the Assessment of Deviant Arousal

    Science.gov (United States)

    Reyes, Jorge R.; Vollmer, Timothy R.; Hall, Astrid

    2011-01-01

    Three adult male sex offenders with developmental disabilities participated in an evaluation of presession factors that may influence levels of sexual arousal measured with a penile plethysmograph. We evaluated the effects of presession masturbation (1 participant) and arousal-suppression strategies (2 participants). Results showed that presession…

  4. Factors Influencing Health-Related Quality of Life of Overweight and Obese Children in South Korea

    Science.gov (United States)

    Kim, Hee Soon; Park, Jiyoung; Ma, Yumi; Ham, Ok Kyung

    2013-01-01

    The purpose of this study was to identify factors influencing health-related quality of life (HRQoL) of overweight and obese children in Korea. This study employed a cross-sectional descriptive study design. A total of 132 overweight and obese children participated in the study. Anthropometric measurements included body mass index, percent body…

  5. Analysis Testing of Sociocultural Factors Influence on Human Reliability within Sociotechnical Systems: The Algerian Oil Companies

    Directory of Open Access Journals (Sweden)

    Abdelbaki Laidoune

    2016-09-01

    Conclusion: The explored sociocultural factors influence the human reliability both in qualitative and quantitative manners. The proposed model shows how reliability can be enhanced by some measures such as experience feedback based on, for example, safety improvements, training, and information. With that is added the continuous systems improvements to improve sociocultural reality and to reduce negative behaviors.

  6. Factors influencing undergraduates' self-evaluation of numerical competence

    Science.gov (United States)

    Tariq, Vicki N.; Durrani, Naureen

    2012-04-01

    This empirical study explores factors influencing undergraduates' self-evaluation of their numerical competence, using data from an online survey completed by 566 undergraduates from a diversity of academic disciplines, across all four faculties at a post-1992 UK university. Analysis of the data, which included correlation and multiple regression analyses, revealed that undergraduates exhibiting greater confidence in their mathematical and numeracy skills, as evidenced by their higher self-evaluation scores and their higher scores on the confidence sub-scale contributing to the measurement of attitude, possess more cohesive, rather than fragmented, conceptions of mathematics, and display more positive attitudes towards mathematics/numeracy. They also exhibit lower levels of mathematics anxiety. Students exhibiting greater confidence also tended to be those who were relatively young (i.e. 18-29 years), whose degree programmes provided them with opportunities to practise and further develop their numeracy skills, and who possessed higher pre-university mathematics qualifications. The multiple regression analysis revealed two positive predictors (overall attitude towards mathematics/numeracy and possession of a higher pre-university mathematics qualification) and five negative predictors (mathematics anxiety, lack of opportunity to practise/develop numeracy skills, being a more mature student, being enrolled in Health and Social Care compared with Science and Technology, and possessing no formal mathematics/numeracy qualification compared with a General Certificate of Secondary Education or equivalent qualification) accounted for approximately 64% of the variation in students' perceptions of their numerical competence. Although the results initially suggested that male students were significantly more confident than females, one compounding variable was almost certainly the students' highest pre-university mathematics or numeracy qualification, since a higher

  7. Generational Approach to Factors Influencing Career Choice in Accounting

    Directory of Open Access Journals (Sweden)

    Jony Hsiao

    Full Text Available ABSTRACT This research aims to grasp which factors influence the generation Y to choose accounting as its career. A significant decline in the number of candidates willing to pursue a career as accountant has been observed abroad - USA, Australia, and Japan. However, in other countries - Brazil, Singapore, and Hong Kong - the opposite has been observed. Another issue is the decline in educational qualification of those pursuing an accounting career, contributing in a way that many talented students change their career choice. This may be explained by the fact that people tend to believe accounting is an exact science, full of calculations, boring, and not very creative, bringing an unbalance between the traits an individual should have according to the job market and those perceived by society. In order to give a contribution to literature concerning the factors that influence the generation Y in its career choice, a goal of this research was conducting an exploratory study where some hypotheses were formulated to support the discussion. We used Mannheim's Generational Theory and the literature on career choice. Data collection was carried out using a questionnaire, based on Schwartz's Portrait Value Questionnaire and Germeijs and Verschueren's Student Choice Task Inventory, adapted through focus group interview. Data were fully collected online and the sample consisted of 665 subjects. The results showed that people who chose accounting as their career were influenced by factors such as creativity, independence, challenging and dynamic environment, job security, money-making, job availability, and other significant people - friends and teachers. The subjects were not influenced by social factors, such as working with people and making contributions to society and family. They wish for more autonomy, creativity, and flexibility at work, and people still care about job security and money-making.

  8. Evaluating factors that influence egg production at Konsoni Poultry Company

    OpenAIRE

    Muje Gjonbalaj; Arben Musliu; Myrvete Badivuku-Pantina; Ilir Zenalaj

    2009-01-01

    The main focus of this research is to evaluate the factors thought to influence the monthly egg production of Konsoni Poultry Company. The linear regression employing different variables of interest is used to predict the future monthly egg production of the largest poultry farm in Kosovo. The general purpose of multiple regressions (the term was first used by Pearson, 1908) is to learn more about the relationship between egg price, local competitors and egg imports as independent or predicto...

  9. INVESTIGATING FACTORS INFLUENCING STUDENTS’ LEARNING IN A TEAM TEACHING SETTING

    OpenAIRE

    Brenda L Killingsworth; Yajiong Xue

    2015-01-01

    Team teaching factors, including mission clarity, affiliation, innovativeness, and fairness, are examined to determine how they influence student learning in a team-taught course. The study involved 184 college students enrolled in an Introduction to Computers course delivered in a team-taught format in a large university located in the United States. The collaborative teaching design followed a traditional team teaching approach with an instructor team teaching the same course collaborativel...

  10. Personal Factors That Influence Audit Manager’s Risk Behaviour

    OpenAIRE

    Ionescu Iancu Octavian; Turlea Eugeniu

    2011-01-01

    Risk is a fundamental concept in audit as well as in the business world at large. Yet, little is known about the personal factors that might influence the risk attitude of a decision maker. The business decision makers are usually faced with a degree of uncertainty when they have to assess risk and make decisions. This paper examines risk behaviour from an audit firm manager perspective and from an academic perspective. The emphasis is on the managerial risk behaviour in business decision mak...

  11. Investigation and control of factors influencing resistance upset butt welding.

    OpenAIRE

    Kerstens, N.F.H.

    2010-01-01

    The purpose of this work is to investigate the factors influencing the resistance upset butt welding process to obtain an understanding of the metal behaviour and welding process characteristics, so that new automotive steels can be welded with reduced development time and fewer failures in production. In principle the welding process is rather simple, the materials to be joined are clamped between two electrodes and pressed together. Because there is an interface present with a higher resist...

  12. Factors Influencing Brand Loyalty For Samsung Mobile Users In Nepal

    OpenAIRE

    Singh, Bikash

    2016-01-01

    Master's thesis Business Administration BE501 - University of Agder 2016 Brand loyalty is one of the key element to success for the business organization. There is a high competition between the brand of the smart phone companies, so it is necessary to develop customer trust to build brand loyalty. The study aims to identify the factors influencing brand loyalty in Nepalese market. The model studies the effect of different independent variables that determines brand loyalty. Regression ana...

  13. Factors Influencing Acceptance of Electronic Health Records in Hospitals

    OpenAIRE

    Wilkins, Melinda A

    2009-01-01

    The study's aim was to examine factors that may influence health information managers in the adoption of electronic health records. The Technology Acceptance Model (TAM) served as theoretical foundation for this quantitative study. Hospital health information managers in Arkansas were queried as to the constructs of perceived usefulness, perceived ease of use, and behavior intention. The study population comprised 94 health information managers with a return rate of 74.5 percent. One manager ...

  14. Factors Influencing Organic Food Purchase of Young Chinese Consumers

    OpenAIRE

    Li, Xiufeng; Xin, Yazhi

    2015-01-01

    Organic food has drawn attention of more and more consumers. As a result, many researchers have attempted to explain the motivations and marketing issues relevant to the topic. The previous studies provide some conflicting results and could not produce a comprehensive understanding of organic food consumers in China. Given the present research, this paper attempts to conduct a comprehensive study of organic food consumption by examining a variety of factors influencing the consumption of orga...

  15. Pakistani medical students' specialty preference and the influencing factors.

    Science.gov (United States)

    Rehman, Anis; Rehman, Tariq; Shaikh, Muhammad Ateeb; Yasmin, Haleema; Asif, Ammara; Kafil, Hina

    2011-07-01

    To elucidate the specialty preferences of Pakistani medical students and the factors which influence medical students to make the decision regarding which specialty to pursue. Both basic sciences and clinical students from four medical colleges of Pakistan, i.e., Dow Medical College, Sindh Medical College, Liaquat National Medical College and Muhammad Medical College, were included in the cross-sectional survey during the period of July 2008 to Jan' 2009. After ethical acceptance, data was collected using convenient sampling technique. The questionnaire covered the following demographic details: 13 common specialties and 15 influencing factors. Questionnaires included in the analysis were 771. Most students gave preference to surgery and its associated sub-specialties (50.3%) followed by internal medicine (26.8%), paediatrics (23.2%), dermatology (16.7%), gynaecology and obstetrics (16.7%), psychiatry (13.1%), radiology (10.8%), ENT (8.8%), anaesthesiology (8.7%), administrative medicine (8.6%), orthopaedics (8.2%), ophthalmology (7.5%), and laboratory medicine (6.1%). The highly considered factors (regarding specialties) chosen by 70% of the medical students were: applicable to respective personalities of the individuals, prestige and respect, international opportunities, and time commitment. Surgical-skills, job availability, financial rating, academic performance, and a role model were moderately influencing factors. Hospital environment, parents, general practice, peer-pressure and personal health were the least influential. This trend suggests competition in surgery and its sub-specialties along with internal medicine, paediatrics, dermatology, gynaecology and obstetrics. Specialty suited to personality, time commitment, prestige/respect and international opportunity, influenced more than 70% of the students.

  16. INFLUENCING FACTORS TOWARDS JOB SATISFACTION OF THE BANK EMPLOYEES

    OpenAIRE

    J. Gayathri; Dr. R. Rajkumar

    2017-01-01

    Job satisfaction can defined as extent of positive feelings or attitudes that individuals have towards their jobs. When a person says that he has high job satisfaction, it means that he really likes his job, feels good about it and values his job dignity. Job satisfaction is important technique used to motivate the employees to work harder. This paper in investigates the level of job satisfaction of bank employees and the various factors influencing satisfaction of employees and to study the ...

  17. An Investigation of Contingency Factors Influencing Intellectual Capital Information

    OpenAIRE

    Mohammad Soheily; Shahnaznayebzadeh; Ramin Abghari

    2014-01-01

    The purpose of this study was to determine the contingency factors influencing the companies' intellectual capital information operating in Yazd industrial city. The study model was formed using intellectual capital as dependent variable and environmental uncertainty, technology advancement and business strategy as independent variables. For purpose of the present study, the applied and correlational methods were used. Data collection was conducted using questionnaires and survey methods. The...

  18. Customer Segmentation by Factors Influencing Brand Loyalty and Customer Involvement

    OpenAIRE

    Tereza Vebrová; Kateřina Venclová; Stanislav Rojík

    2016-01-01

    Brand loyalty and customer involvement are two important concepts that help explain and understand a significant part of consumer shopping behavior. The aim of the present work is to identify factors influencing brand loyalty and customer involvement. A further aim is to consider subsequent segmentation of customers with respect to different degrees of brand loyalty and customer involvement. The research was focused on the field of Czech telecommunication services – mobile operators. Primary ...

  19. Factors Influencing Depression among Elderly Patients in Geriatric Hospitals

    OpenAIRE

    Jee, Young Ju; Lee, Yun Bok

    2013-01-01

    [Purpose] The purpose of this study was to investigate the prevalence of depression among elderly patients and identify the factors influencing depression in a geriatric hospital in Korea. [Subjects] A self-report questionnaire was administered to the patients in community geriatric hospitals. Participants were 195 elderly patients. [Methods] The instruments utilized in this study were the Geriatric Depression Scale Short Form Korea (GDSSF-K), an activity of daily living scale, a self-esteem ...

  20. Factors influencing consumers’ online purchase behaviour of skin care

    OpenAIRE

    Di Palma, Amelia

    2015-01-01

    2015 dissertation for MA in International Marketing Management. Selected by academic staff as a good example of a masters level dissertation. \\ud \\ud Purpose – The purpose of this paper is investigating which factors influence consumers’ purchase behaviour of skin care online, and what impact online trust has on mitigating the effects of risk normally associated with shopping online. The study explores industry specific variables and their effects on online consumer behaviour. The study also ...