Gas and energy efficiency. The ''E'' factor

International Nuclear Information System (INIS)

McGregor, G.

1992-06-01

On 1 April 1992 a new gas tariff formula came into effect limiting the prices British Gas can charge to its 18 million -primarily domestic - tariff customers. A feature of the new formula is the ''E'' factor, designed to stimulate investment by British Gas in energy efficiency. This paper is intended to explain the thinking which lay behind the introduction of the ''E''factor, what statutory and other considerations need to be taken into account in considering ''E'' factor proposals and how the arrangements for the gas industry are likely to fit in with the creation of an Energy Savings Trust recently announced by the Government. In doing so, it is intended to give guidance to those who may have proposals for the more efficient use of energy and gas and wish to understand whether these could be eligible to be considered as ''E'' factor projects. (Author)

Submarine slope failures in the Beaufort Sea; Influence of gas hydrate decomposition

Science.gov (United States)

Grozic, J. L.; Dallimore, S.

2012-12-01

The continental shelf of the Beaufort Sea is composed of complex of marine and non-marine sequences of clay, silt, and sand. In many areas of the shelf these sediments contain occurrences of ice-bonded permafrost and associated pressure and temperature conditions that are conducive to the occurrence of methane gas hydrates. This complex environment is undergoing dramatic warming, where changes in sea level, ocean bottom temperatures, and geothermal regimes are inducing permafrost thawing and gas hydrate decomposition. Decomposition is inferred to be occurring at the base and top of the gas hydrate stability zone, which will cause sediment weakening and the generation of excess water and free gas. In such settings, the overlying permafrost cap may act as a permeability barrier, which could result in significant excess pore pressures and reduction in sediment stability. The shelf to slope transition is thought to be an area of extensive regional instability with acoustic records indicating there is upwards of 500 km of slumps and glides extending over the entire Beaufort margin. Some of these slide regions are coincident with up-dip limit of the permafrost gas hydrate stability zone. In this paper, a two dimensional model of the Beaufort shelf was constructed to examine the influence of gas hydrate decomposition on slope stability. The model relies on available data on the Beaufort sediments generated from offshore hydrocarbon exploration in the 1980s and 90s, as well as knowledge available from multidisciplinary marine research programs conducted in the outer shelf area. The slope stability model investigates the influence of marine transgression and ocean bottom warming by coupling soil deformation with hydrate dissociation during undrained conditions. By combining mechanical and thermal loading of the sediment, a more accurate indication of slope stability was obtained. The stability analysis results indicate a relatively low factor of safety for the Beaufort

The influence of liquid-gas velocity ratio on the noise of the cooling tower

Science.gov (United States)

Yang, Bin; Liu, Xuanzuo; Chen, Chi; Zhao, Zhouli; Song, Jinchun

2018-05-01

The noise from the cooling tower has a great influence on psychological performance of human beings. The cooling tower noise mainly consists of fan noise, falling water noise and mechanical noise. This thesis used DES turbulence model with FH-W model to simulate the flow and sound pressure field in cooling tower based on CFD software FLUENT and analyzed the influence of different kinds noise, which affected by diverse factors, on the cooling tower noise. It can be concluded that the addition of cooling water can reduce the turbulence and vortex noise of the rotor fluid field in the cooling tower at some extent, but increase the impact noise of the liquid-gas two phase. In general, the cooling tower noise decreases with the velocity ratio of liquid to gas increasing, and reaches the lowest when the velocity ratio of liquid to gas is close to l.

Treatment of timber products with gaseous borate esters, Part 1: factors influencing the treatment process

CSIR Research Space (South Africa)

Turner, P

1995-08-01

Full Text Available Several factors which influence the treatment of timber products with vapour phase preservatives such as borate esters are considered. Gas flow rate through the substrate was found to be a significant factor limiting both preservative penetration...

Factors affecting seasonal gas prices: Analysis of trends and R and D implications. Final report, November 1990-February 1992

International Nuclear Information System (INIS)

Denhardt, R.C.

1992-02-01

Three economic factors were identified which influence the seasonality of gas prices: fuel switching, storage, and utilization of wellhead deliverability. Also, contract structures will have an influence on the seasonality of natural gas prices. Increases in the utilization of wellhead deliverability tends to increase the seasonality of gas prices. Price-induced fuel switching capability is too small to significantly influence the seasonality of gas prices. If there is adequate deliverability, the cost of interruptible storage, including carry cost, will place a ceiling on the seasonability of gas prices. This cost is about $.70 per MMBtu. If deliverability tightens, then the cost of firm storage or producer shut-ins will place a ceiling on gas prices. The ceiling would range from $1.00 to $1.20 per MMBtu. There is concern about whether the current market structure will provide for a smooth return to full cycle pricing. The current premiums for new contracts are inadequate to achieve this objective

A brief review of salient factors influencing adult eating behaviour.

Science.gov (United States)

Emilien, Christine; Hollis, James H

2017-12-01

A better understanding of the factors that influence eating behaviour is of importance as our food choices are associated with the risk of developing chronic diseases such as obesity, CVD, type 2 diabetes or some forms of cancer. In addition, accumulating evidence suggests that the industrial food production system is a major contributor to greenhouse gas emission and may be unsustainable. Therefore, our food choices may also contribute to climate change. By identifying the factors that influence eating behaviour new interventions may be developed, at the individual or population level, to modify eating behaviour and contribute to society's health and environmental goals. Research indicates that eating behaviour is dictated by a complex interaction between physiology, environment, psychology, culture, socio-economics and genetics that is not fully understood. While a growing body of research has identified how several single factors influence eating behaviour, a better understanding of how these factors interact is required to facilitate the developing new models of eating behaviour. Due to the diversity of influences on eating behaviour this would probably necessitate a greater focus on multi-disciplinary research. In the present review, the influence of several salient physiological and environmental factors (largely related to food characteristics) on meal initiation, satiation (meal size) and satiety (inter-meal interval) are briefly discussed. Due to the large literature this review is not exhaustive but illustrates the complexity of eating behaviour. The present review will also highlight several limitations that apply to eating behaviour research.

Influence of gas pressure on the effective thermal conductivity of ceramic breeder pebble beds

International Nuclear Information System (INIS)

Dai, Weijing; Pupeschi, Simone; Hanaor, Dorian; Gan, Yixiang

2017-01-01

Highlights: • This study explicitly demonstrates the influence of the gas pressure on the effective thermal conductivity of pebble beds. • The gas pressure influence is shown to correlated to the pebble size. • The effective thermal conductivity is linked to thermal-mechanical properties of pebbles and packing structure. - Abstract: Lithium ceramics have been considered as tritium breeder materials in many proposed designs of fusion breeding blankets. Heat generated in breeder pebble beds due to nuclear breeding reaction must be removed by means of actively cooled plates while generated tritiums is recovered by purge gas slowly flowing through beds. Therefore, the effective thermal conductivity of pebble beds that is one of the governing parameters determining heat transport phenomenon needs to be addressed with respect to mechanical status of beds and purge gas pressure. In this study, a numerical framework combining finite element simulation and a semi-empirical correlation of gas gap conduction is proposed to predict the effective thermal conductivity. The purge gas pressure is found to vary the effective thermal conductivity, in particular with the presence of various sized gaps in pebble beds. Random packing of pebble beds is taken into account by an approximated correlation considering the packing factor and coordination number of pebble beds. The model prediction is compared with experimental observation from different sources showing a quantitative agreement with the measurement.

Influence of gas pressure on the effective thermal conductivity of ceramic breeder pebble beds

Energy Technology Data Exchange (ETDEWEB)

Dai, Weijing [School of Civil Engineering, The University of Sydney, Sydney (Australia); Pupeschi, Simone [Institute for Applied Materials, Karlsruhe Institute of Technology (KIT) (Germany); Hanaor, Dorian [School of Civil Engineering, The University of Sydney, Sydney (Australia); Institute for Materials Science and Technologies, Technical University of Berlin (Germany); Gan, Yixiang, E-mail: yixiang.gan@sydney.edu.au [School of Civil Engineering, The University of Sydney, Sydney (Australia)

2017-05-15

Highlights: • This study explicitly demonstrates the influence of the gas pressure on the effective thermal conductivity of pebble beds. • The gas pressure influence is shown to correlated to the pebble size. • The effective thermal conductivity is linked to thermal-mechanical properties of pebbles and packing structure. - Abstract: Lithium ceramics have been considered as tritium breeder materials in many proposed designs of fusion breeding blankets. Heat generated in breeder pebble beds due to nuclear breeding reaction must be removed by means of actively cooled plates while generated tritiums is recovered by purge gas slowly flowing through beds. Therefore, the effective thermal conductivity of pebble beds that is one of the governing parameters determining heat transport phenomenon needs to be addressed with respect to mechanical status of beds and purge gas pressure. In this study, a numerical framework combining finite element simulation and a semi-empirical correlation of gas gap conduction is proposed to predict the effective thermal conductivity. The purge gas pressure is found to vary the effective thermal conductivity, in particular with the presence of various sized gaps in pebble beds. Random packing of pebble beds is taken into account by an approximated correlation considering the packing factor and coordination number of pebble beds. The model prediction is compared with experimental observation from different sources showing a quantitative agreement with the measurement.

Factors that influence an elemental depth concentration profile

International Nuclear Information System (INIS)

McHugh, J.A.

1975-01-01

The use of secondary ion mass spectrometry in concentration profiling is discussed. Two classes of factors that influence an elemental concentration profile are instrumental effects and ion-matrix effects. Instrumental factors that must be considered are: (1) uniformity of the primary ion current density, (2) constancy of the primary ion current, (3) redeposition, (4) memory, (5) primary ion beam tailing and the nonfocused component, (6) chemical purity of the primary ion beam, and (7) residual gas impurities. Factors which can be classified as ion matrix effects are: (1) the mean escape depth of secondary ions, (2) recoil implantation, (3) molecular ion interferences, (4) primary ion beam induced diffusion of matrix species, (5) nonuniform sputter removal of matrix layers, and (6) implanted primary ion chemical and lattice damage effects

Study of influence of gas mixture composition on the multistep avalanche chambers characteristics

International Nuclear Information System (INIS)

Abdushukurov, D.A.; Zanevskij, Yu.V.; Peshekhonov, V.D.

1987-01-01

The influence of the concentration of organic quenchers on the operation of multistep avalanche chambers /MSAC/ has been studied. An empirical dependence of the gas amplification factor of MSAC on the quencher concentration has been derived. Measures are considered to increase the stability of the MSAC operation. To improve the MSAC operation argon + n-heptane, neon + methane and neon + argon + methane mixtures are suggested

Assessment of Factors Influencing Effective CO₂ Storage Capacity and Injectivity in Eastern Gas Shales

Energy Technology Data Exchange (ETDEWEB)

Godec, Michael [Advanced Resources International, Inc., Arlington, VA (United States)

2013-06-30

Building upon advances in technology, production of natural gas from organic-rich shales is rapidly developing as a major hydrocarbon supply option in North America and around the world. The same technology advances that have facilitated this revolution - dense well spacing, horizontal drilling, and hydraulic fracturing - may help to facilitate enhanced gas recovery (EGR) and carbon dioxide (CO₂) storage in these formations. The potential storage of CO₂ in shales is attracting increasing interest, especially in Appalachian Basin states that have extensive shale deposits, but limited CO₂ storage capacity in conventional reservoirs. The goal of this cooperative research project was to build upon previous and on-going work to assess key factors that could influence effective EGR, CO₂ storage capacity, and injectivity in selected Eastern gas shales, including the Devonian Marcellus Shale, the Devonian Ohio Shale, the Ordovician Utica and Point Pleasant shale and equivalent formations, and the late Devonian-age Antrim Shale. The project had the following objectives: (1) Analyze and synthesize geologic information and reservoir data through collaboration with selected State geological surveys, universities, and oil and gas operators; (2) improve reservoir models to perform reservoir simulations to better understand the shale characteristics that impact EGR, storage capacity and CO₂ injectivity in the targeted shales; (3) Analyze results of a targeted, highly monitored, small-scale CO₂ injection test and incorporate into ongoing characterization and simulation work; (4) Test and model a smart particle early warning concept that can potentially be used to inject water with uniquely labeled particles before the start of CO₂ injection; (5) Identify and evaluate potential constraints to economic CO₂ storage in gas shales, and propose development approaches that overcome these constraints

Daily changes of radon concentration in soil gas under influence of atmospheric factors: room temperature, soil surface temperature and relative humidity

International Nuclear Information System (INIS)

Lara, Evelise G.; Oliveira, Arno Heeren de

2015-01-01

This work aims at relating the daily change in the radon concentration in soil gas in a Red Yellow Acrisol (SiBCS) under influence of atmospheric factors: room temperature, soil surface temperature and relative humidity. The 226 Ra, 232 Th, U content and permeability were also performed. The measurements of radon soil gas were carried out by using an AlphaGUARD monitor. The 226 Ra activity concentration was made by Gamma Spectrometry (HPGe); the permeability was carried out using the RADON-JOK permeameter and ICP-MS analysis to 232 Th and U content. The soil permeability is 5.0 x 10 -12 , which is considered average. The 226 Ra (22.2 ± 0.3 Bq.m -3 ); U content (73.4 ± 3.6 Bq.kg -1 ) and 232 Th content (55.3 ± 4.0 Bq.kg -1 ) were considered above of average concentrations, according to mean values for soils typical (~ 35.0 Bq.kg -1 ) by UNSCEAR. The results showed a difference of 26.0% between the highest and the lowest concentration of radon in soil gas: at midnight (15.5 ± 1.0 kBq.m -3 ) and 3:00 pm, the highest mean radon concentration (21.0 ± 1.0 kBq.m -3 ). The room temperature and surface soil temperature showed equivalent behavior and the surface soil temperature slightly below room temperature during the entire monitoring time. Nevertheless, the relative humidity showed the highest cyclical behavior, showing a higher relationship with the radon concentration in soil gas. (author)

Study on fine particles influence on sodium sulfite and oxygen gas-liquid reaction

Energy Technology Data Exchange (ETDEWEB)

Tao, Shuchang; Zhao, Bo; Wang, Shujuan; Zhuo, Yuqun; Chen, Changhe [Tsinghua Univ., Beijing (China). Dept. of Thermal Engineering; Ministry of Education, Beijing (China). Key Lab. for Thermal Science and Power Engineering

2013-07-01

Wet limestone scrubbing is the most common flue gas desulfurization process for control of sulfur dioxide emissions from the combustion of fossil fuels, and forced oxidation is a key part of the reaction. During the reaction which controlled by gas-liquid mass transfer, the fine particles' characteristic, size, solid loading and temperature has a great influence on gas-liquid mass transfer. In the present work is to explain how these factors influence the reaction between Na{sub 2}SO{sub 3} and O{sub 2} and find the best react conditions through experiment. The oxidation rate was experimentally studied by contacting pure oxygen with a sodium sulfite solution with active carbon particle in a stirred tank, and the system pressure drop was record by the pressure sensor. At the beginning the pressure is about 215 kPa and Na{sub 2}SO{sub 3} is about 0.5mol/L. The temperature is 40, 50, 60, 70, 80 C. Compare the results of no particles included, we can conclude that high temperature, proper loadings and smaller particles resulting in higher mass transfer coefficients k{sub L}.

Factors Influencing of Social Conflict

Directory of Open Access Journals (Sweden)

Suwandi Sumartias

2013-07-01

Full Text Available Social conflicts that occur in several areas in Indonesia lately, one of them is caused by the weakness of law certainty. This is feared to threaten the integration of the Republic of Indonesia. This study aims to determine the factors that affect social conflict in Manis Lor village in Kuningan district. The method used the explanatory quantitative methods, the statistical test Path Analysis. The study population was a formal and informal community leaders (village chief, clergy, and youth, and the people who involved in a conflict in Manis Lor village Kuningan regency. The result shows a There is no significant influence between social identity factors with social conflict anarchist. b There is significant influence between socio-economic factors with social conflict anarchists. c There is no significant influence between the credibility factor anarchist leaders with social conflict. d There is no significant influence between the motive factor with anarchist social conflict. e There is significant influence between personality factors/beliefs with anarchist social conflict. f There is significant influence of behavioral factors anarchist communication with social conflict.

Daily changes of radon concentration in soil gas under influence of atmospheric factors: room temperature, soil surface temperature and relative humidity

Energy Technology Data Exchange (ETDEWEB)

Lara, Evelise G.; Oliveira, Arno Heeren de, E-mail: evelise.lara@gmail.com, E-mail: heeren@nuclear.ufmg.br [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Departamento de Engenharia Nuclear; Rocha, Zildete; Rios, Francisco Javier, E-mail: rochaz@cdtn.br, E-mail: javier@cdtn.br [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

2015-07-01

This work aims at relating the daily change in the radon concentration in soil gas in a Red Yellow Acrisol (SiBCS) under influence of atmospheric factors: room temperature, soil surface temperature and relative humidity. The {sup 226}Ra, {sup 232}Th, U content and permeability were also performed. The measurements of radon soil gas were carried out by using an AlphaGUARD monitor. The {sup 226}Ra activity concentration was made by Gamma Spectrometry (HPGe); the permeability was carried out using the RADON-JOK permeameter and ICP-MS analysis to {sup 232}Th and U content. The soil permeability is 5.0 x 10{sup -12}, which is considered average. The {sup 226}Ra (22.2 ± 0.3 Bq.m{sup -3}); U content (73.4 ± 3.6 Bq.kg{sup -1}) and {sup 232}Th content (55.3 ± 4.0 Bq.kg{sup -1}) were considered above of average concentrations, according to mean values for soils typical (~ 35.0 Bq.kg{sup -1}) by UNSCEAR. The results showed a difference of 26.0% between the highest and the lowest concentration of radon in soil gas: at midnight (15.5 ± 1.0 kBq.m{sup -3}) and 3:00 pm, the highest mean radon concentration (21.0 ± 1.0 kBq.m{sup -3}). The room temperature and surface soil temperature showed equivalent behavior and the surface soil temperature slightly below room temperature during the entire monitoring time. Nevertheless, the relative humidity showed the highest cyclical behavior, showing a higher relationship with the radon concentration in soil gas. (author)

Modelling studies for influence factors of gas bubble in compressed air energy storage in aquifers

International Nuclear Information System (INIS)

Guo, Chaobin; Zhang, Keni; Li, Cai; Wang, Xiaoyu

2016-01-01

CAES (Compressed air energy storage) is credited with its potential ability for large-scale energy storage. Generally, it is more convenient using deep aquifers than employing underground caverns for energy storage, because of extensive presence of aquifers. During the first stage in a typical process of CAESA (compressed air energy storage in aquifers), a large amount of compressed air is injected into the target aquifer to develop an initial space (a gas bubble) for energy storage. In this study, numerical simulations were conducted to investigate the influence of aquifer's permeability, geological structure and operation parameters on the formation of gas bubble and the sustainability for the later cycling operation. The SCT (system cycle times) was designed as a parameter to evaluate the reservoir performance and the effect of operation parameters. Simulation results for pressure and gas saturation results of basic model confirm the feasibility of compressed air energy storage in aquifers. The results of different permeability cases show that, for a certain scale of CAESA system, there is an optimum permeability range for a candidate aquifer. An aquifer within this permeability range will not only satisfy the injectivity requirement but also have the best energy efficiency. Structural impact analysis indicates that the anticline structure has the best performance to hold the bubble under the same daily cycling schedule with the same initial injected air mass. In addition, our results indicate that the SCT shows a logarithmic growth as the injected air mass increase. During the formation of gas bubble, compressed air should be injected into aquifers with moderate rate and the injection can be done in several stages with different injection rate to avoid onset pressure. - Highlights: • Impact of permeability, geological structure, operation parameters was investigated. • With certain air production rate, an optimum permeability exists for performance. �

Major factors influencing the generation of natural gas hydrate in porous media

Directory of Open Access Journals (Sweden)

V.N. Khlebnikov

2017-11-01

Full Text Available Current researches related to natural gas hydrate mainly focus on its physical and chemical properties, as well as the approaches to the production (decomposition of hydrate. Physical modeling of the flow process in hydrate deposits is critical to the study on the exploitation or decomposition of hydrate. However, investigation of the dynamic hydrate process by virtue of porous media like sand-packed tubes which are widely used in petroleum production research is rarely reported in literature. In this paper, physical simulation of methane hydrate generation process was conducted using river sand-packed tubes in the core displacement apparatus. During the simulation, the influences of parameters such as reservoir temperature, methane pressure and reservoir model properties on the process of hydrate generation were investigated. The following results are revealed. First, the use of ice-melted water as the immobile water in the reservoir model can significantly enhance the rate of methane hydrate generation. Second, the process driving force in porous media (i.e., extents to which the experimental pressure or temperature deviating those corresponding to the hydrate phase equilibrium plays a key role in the generation of methane hydrate. Third, the induction period of methane hydrate generation almost does not change with temperature or pressure when the methane pressure is above 1.4 folds of the hydrate phase equilibrium pressure or the laboratory temperature is lower than the phase equilibrium temperature by 3 °C or more. Fourth, the parameters such as permeability, water saturation and wettability don't have much influence on the generation of methane hydrate.

The modes of influence of oil on gas markets - The economy

International Nuclear Information System (INIS)

Maisonnier, Guy

2016-01-01

This article first indicates how the oil price has influence on some gas markets in the USA, in the UK and in the Asia-Pacific region. The author then focuses on this last region, notably Japan where the LNG market was strongly impacted by the oil price. Many Asian actors now want to reform the gas market in order to avoid such a strong influence. The author discusses the consequences of the development of shale gas exploitation in the USA, not only on the US domestic market, but also on Europe and Asia. In Europe, two types of prices are still coexisting: indexed and spot prices. Indexed prices might be reached in periods of tension on the market (during a cold winter), but the trend is globally oriented downwards. It seems that spot prices tend to converge toward indexed prices, at least in winter. Thus, despite the existence of indexed contracts, the influence of oil price is slowly decreasing. Finally, the author outlines upheavals experienced by the gas market since 2009 due to economic growth, development of shale gas, change of contract models, level of LNG supply, CO 2 price, increasing share of renewable energies

The influence of shale gas on steamcracking

Energy Technology Data Exchange (ETDEWEB)

Rupieper, A. [Linde Engineering Dresden GmbH, Dresden (Germany)

2013-11-01

US shale gas reserves with more than 860 TCF (Source: U.S. Energy Information Administration study World Shale Gas Resources) account for 2 of the global largest reserves after China. In 7 areas of the US, these reserves are systematically explored, providing a significant amount of cheap natural gas source for decades. The ethane share, carried by such shale gas, can reach up to 16%. Ethane has been already in the past 2 most important feedstock for Steamcrackers, being the backbone of the Petrochemical Industry. Due to availability of vast shale gas, the US steamcracker industry is facing a shift from naphtha to shale gas ethane, as the margin of Ethylene produced from shale gas ethane is significantly larger than that of naphtha based Ethylene (app. + 630 USD/t Ethylene). As a consequence shale gas is ''the magic bullet'' incinerating investments into Steamcrackers and downstream plants for U.S petrochemical industry. Steamcracker Projects with an additional ethylene production capacity of more than 17 million tons/a by 2020 are announced or already under construction. Investments into downstream plants refining the C2 derivatives will follow or are already in planning/engineering phase. But the US market cannot absorb all related products, causing a significant export exposure, which will influence global trade flows for C2 derivatives and affect prices. This article presents the impact of shale gas ethane cracking on: - Trade flow of C2 derivatives; - By-product deficits; - Alternate C3+ derivative production routes; - Challenges related to engineering requirements and project execution for Steamcracker projects. (orig.)

Energy Markets in the United States: The Influence of Politics, Regulations, and Markets on Energy Development in the Oil and Gas and Wind Industries

Science.gov (United States)

Maguire, Karen Kay

2011-12-01

My dissertation focuses on the influence of politics, policies, and markets in determining oil and natural gas and wind energy development. In the first chapter, I examine the role of federal elected political influence and market factors in determining the acres of oil and natural gas leases issued on Bureau of Management (BLM) lands in the western United States between 1978 and 2008. I seek to determine if the political party and ideology of the federal political environment influence the number of acres that are leased and if there is disparate federal political influence in states that have a large amount of federal lands. Using a random effects Tobit model for a 17-state sample of the westernmost states in the contiguous United States, I find that more conservative federal political influence leads to additional leasing. The results are consistent across Senate committee leaders, Senate majority leadership, and the President's office. The further found that the influence of politics on leasing is not stronger in states with more federal lands. In the second chapter, I analyze the influence of state and federal political party changes and market factors on state oil and natural gas permitting. My findings, using a first-differenced empirical model for two samples, a 19-state sample, from 1990--2007, and a 14-state sample, from 1977--2007, indicate that the influence of state political party changes are trumped by economic factors. Oil and gas prices are the main drivers of permitting changes, while the state political party changes for the state legislatures and Governor's office are consistently not significant. In the third chapter I focus on the role of electricity markets and renewable energy regulation in wind development across the United States. My findings, using a random effects Tobit model with a 25-state sample, from 1994--2008, indicate that the implementation of state Renewables Portfolio Standards (RPS), the Federal Production Tax Credit (PTC

Factors Influencing HEPA Filter Performance

International Nuclear Information System (INIS)

Parsons, M.S.; Waggoner, Ch.A.

2009-01-01

Properly functioning HEPA air filtration systems depend on a variety of factors that start with the use of fully characterized challenge conditions for system design and then process control during operation. This paper addresses factors that should be considered during the design phase as well as operating parameters that can be monitored to ensure filter function and lifetime. HEPA filters used in nuclear applications are expected to meet design, fabrication, and performance requirements set forth in the ASME AG-1 standard. The DOE publication Nuclear Air Cleaning Handbook (NACH) is an additional guidance document for design and operation HEPA filter systems in DOE facilities. These two guidelines establish basic maximum operating parameters for temperature, maximum aerosol particle size, maximum particulate matter mass concentration, acceptable differential pressure range, and filter media velocity. Each of these parameters is discussed along with data linking variability of each parameter with filter function and lifetime. Temporal uncertainty associated with gas composition, temperature, and absolute pressure of the air flow can have a direct impact on the volumetric flow rate of the system with a corresponding impact on filter media velocity. Correlations between standard units of flow rate (standard meters per minute or cubic feet per minute) versus actual units of volumetric flow rate are shown for variations in relative humidity for a 70 deg. C to 200 deg. C temperature range as an example of gas composition that, uncorrected, will influence media velocity. The AG-1 standard establishes a 2.5 cm/s (5 feet per minute) ceiling for media velocities of nuclear grade HEPA filters. Data are presented that show the impact of media velocities from 2.0 to 4.0 cm/s media velocities (4 to 8 fpm) on differential pressure, filter efficiency, and filter lifetime. Data will also be presented correlating media velocity effects with two different particle size

Study of design and technology factors influencing gas turbine blade cooling

Science.gov (United States)

Shevchenko, I. V.; Garanin, I. V.; Rogalev, A. N.; Kindra, V. O.; Khudyakova, V. P.

2017-11-01

The knowledge of aerodynamic and thermal parameters of turbulators used in order to design an efficient blade cooling system. However, all experimental tests of the hydraulic and thermal characteristics of the turbulators were conducted on the rectangular shape channels with a strongly defined air flow direction. The actual blades have geometry of the channels that essentially differs from the rectangular shape. Specifically, the air flow in the back cavity of a blade with one and half-pass cooling channel changes its direction throughout the feather height. In most cases the ribs and pins are made with a tilt to the channel walls, which is determined by the moving element design of a mould for the ceramic rod element fabrication. All of the factors described above may result in the blade thermohydraulic model being developed failing to fully simulate the air flow and the heat exchange processes in some sections of the cooling path. Hence, the design temperature field will differ from the temperature field of an actual blade. This article studied the numerical data of design and technology factors influencing heat transfer in the cooling channels. The results obtained showed their substantial impact on the blade cooling efficiency.

REDUCING GREENHOUSE GAS EMISSIONS AND THE INFLUENCES ON ECONOMIC DEVELOPMENT

Directory of Open Access Journals (Sweden)

ANGHELUȚĂ PETRICĂ SORIN

2016-06-01

Full Text Available In the recent years, there has been observed a degradation of the environment. This has negative effects on human activities. Besides the influence of the environment on people, also the economic crisis had a negative contribution. The imbalances manifested in the environment influence the economic systems. This article presents an analysis of the greenhouse gas emissions. Also, there is a link between the greenhouse gas emissions and the economic development. In the situation in which the environmental pollution is increasingly affecting humanity, the transition to an economy with reduced greenhouse gas emissions appears to be a viable solution. This transition provides a number of opportunities, as well. Therefore, one of these opportunities is the one related to the employment. In this regard, retraining people working in polluting industries is very important

Human factors influencing decision making

OpenAIRE

Jacobs, Patricia A.

1998-01-01

This report supplies references and comments on literature that identifies human factors influencing decision making, particularly military decision making. The literature has been classified as follows (the classes are not mutually exclusive): features of human information processing; decision making models which are not mathematical models but rather are descriptive; non- personality factors influencing decision making; national characteristics influencing decision makin...

Oil and gas development influences big-game hunting in Wyoming

Science.gov (United States)

Dorning, Monica; Garman, Steven L.; Diffendorfer, James E.; Semmens, Darius J.; Hawbaker, Todd J.; Bagstad, Kenneth J.

2017-01-01

Development from extracting oil and gas resources can have unintended effects on multiple ecosystem functions, with cascading effects on wildlife, ecosystem services, and local economies. Big-game hunting opportunities may be closely related to these effects, but empirical analyses of impacts of energy development on hunting are limited. We examined the influence of oil and gas development density on harvest efficiency, or harvest per unit of hunter effort, within all hunt areas in Wyoming, USA, from 2008 to 2014 for 3 big-game species: elk (Cervus canadensis), mule deer (Odocoileus hemionus), and pronghorn (Antilocapra americana). Using harvest/hunter day as the response variable, we compared linear mixed-effects models for each species that included total well density (i.e., all wells constructed up to the year of record), active well density (i.e., only those wells currently producing oil or gas in that year), or neither as a predictor variable. We used well densities as indicators of development in the absence of data specifying the locations of other oil and gas infrastructure (e.g., roads, well pads). Models also accounted for the fixed effects of road density, hunter density, proportion of the area that is public land with unrestricted hunter access, proportion of the area that is forested, year of observation, and random effects of variation among hunt areas nested within associated game herd units. Presence of oil and gas wells had a positive influence on harvest efficiency for elk and mule deer. Although there was no overall effect to pronghorn, there was a negative influence of wells on juvenile pronghorn harvest efficiency. Changes in harvest efficiency due to expanding oil and gas development could alter the time spent hunting by hunters and their chances of harvesting an animal. This could have subsequent impacts on hunter satisfaction, game populations, and economic revenue generated from recreational hunters.

Classification and analysis of factors that affect stability of oil and gas enterprise staff

Directory of Open Access Journals (Sweden)

Zelinska Haluna Olexiivna

2016-12-01

Full Text Available The relevance of human resources as a strategic goal of sustainable development of oil and gas companies is determined. It is shown that the stability of staff, as the main component of the social components of sustainable enterprise development, research and evaluation needs in terms of an integrated system of factors influence the behavior of staff. Addressing issues related to the management personnel can be based classification study the factors affecting its stability in the formation of high quality human resources strategy. In particular noted that the needs of each employee should become an integral part of the concept of work and life balance. Analysis of the results of the study showed that in areas of oil and gas industry has a number of factors that negatively affect its operation and development, which are caused not only technical, technological and natural factors, but also due to neglect behavioral characteristics personnel. It is found that without understanding of the behavioral characteristics of staff and its values can`t implement a quality model of human resource management and provide optimal scenarios of oil companies in general.

A CFD study of wave influence on film steam condensation in the presence of non-condensable gas

Energy Technology Data Exchange (ETDEWEB)

Wang, Xianmao, E-mail: xm-wang11@mails.tsinghua.edu.cn [Institute of Nuclear and New Energy Technology, Tsinghua University, Beijing 100084 (China); Chang, Huajian, E-mail: changhj@tsinghua.edu.cn [Institute of Nuclear and New Energy Technology, Tsinghua University, Beijing 100084 (China); Corradini, Michael, E-mail: corradini@engr.wisc.edu [Department of Engineering Physics, University of Wisconsin-Madison, 1500 Engineering Drive, Madison, WI 53706 (United States)

2016-08-15

Highlights: • A condensation model is incorporated in the ANSYS FLUENT. • Different turbulence models are evaluated for flows over wavy surfaces. • Wavy surfaces with and without moving velocities are used to model the wave. • Various wavy surfaces with different wave heights and wavelengths are selected. • Wave influence on film steam condensation is investigated. - Abstract: Steam condensation plays an important role in removing heat from the containment of a nuclear plant during postulated accidents. However, due to the presence of non-condensable gases such as air and hydrogen in the containment, the condensation rate can decrease dramatically. Under certain conditions, the condensate film on the cold containment walls can affect the overall heat transfer rate. The wavy interface of the condensate film is a factor and is usually believed to enhance the condensation rate, since the waves can both increase the interfacial area and disturb the non-condensable gas boundary layer. However, it is not clear how to properly account for this factor and what is its quantitative influence in experiments. In this work, a CFD approach is applied to study the wave effects on film condensation in the presence of non-condensable gas. Wavy surfaces with and without moving velocities are used to replace the wavy interface of the falling film. A condensation model is incorporated in the ANSYS FLUENT simulation and a realizable k–ε turbulence model is applied. Various wavy surfaces with different wave heights and wavelengths are selected to conduct numerical experiments with a wide range of gas velocities. The results show that the wave structure can enhance condensation rate up to ten percent mainly due to the alteration of local flow structures in the gas phase. The increments of the condensation rate due to the wavy interface can vary with different gas velocities. The investigation shows that a multiplication factor accounts for the wave effects on film

Influence of the nozzle angle on refrigeration performance of a gas wave refrigerator

Science.gov (United States)

Liu, P.; Zhu, Y.; Wang, H.; Zhu, C.; Zou, J.; Wu, J.; Hu, D.

2017-05-01

A gas wave refrigerator (GWR) is a novel refrigerating device that refrigerates a medium by shock waves and expansion waves generated by gas pressure energy. In a typical GWR, the injection energy losses between the nozzle and the expansion tube are essential factors which influence the refrigeration efficiency. In this study, numerical simulations are used to analyze the underlying mechanism of the injection energy losses. The results of simulations show that the vortex loss, mixing energy loss, and oblique shock wave reflection loss are the main factors contributing to the injection energy losses in the expansion tube. Furthermore, the jet angle of the gas is found to dominate the injection energy losses. Therefore, the optimum jet angle is theoretically calculated based on the velocity triangle method. The value of the optimum jet angle is found to be 4^{circ }, 8^{circ }, and 12^{circ } when the refrigeration efficiency is the first-order, second-order, and third-order maximum value over all working ranges of jet frequency, respectively. Finally, a series of experiments are conducted with the jet angle ranging from -4^{circ } to 12^{circ } at a constant expansion ratio. The results indicate the optimal jet angle obtained by the experiments is in good agreement with the calculated value. The isentropic refrigeration efficiency increased by about 4 % after the jet angle was optimized.

[Natural factors influencing sleep].

Science.gov (United States)

Jurkowski, Marek K; Bobek-Billewicz, Barbara

2007-01-01

Sleep is a universal phenomenon of human and animal lives, although the importance of sleep for homeo-stasis is still unknown. Sleep disturbances influence many behavioral and physiologic processes, leading to health complications including death. On the other hand, sleep improvement can beneficially influence the course of healing of many disorders and can be a prognostic of health recovery. The factors influencing sleep have different biological and chemical origins. They are classical hormones, hypothalamic releasing and inhibitory hormones, neuropeptides, peptides and others as cytokines, prostaglandins, oleamid, adenosine, nitric oxide. These factors regulate most physiologic processes and are likely elements integrating sleep with physiology and physiology with sleep in health and disorders.

Influences of gas stream conditions on efficiency of tritiated moisture collection with P2O5-desiccant and isotope effect

International Nuclear Information System (INIS)

Kotoh, Kenji; Miura, Katsuya; Kashio, Yousuke; Nishikawa, Masabumi

1991-01-01

A method was proposed previously for collection and measurement of tritiated moisture in gas stream using P 2 O 5 -desiccant. Influences of the gas humidity, the gas flow rate and the distance between gas nozzle and P 2 O 5 -desiccant layer surface on the moisture collection efficiency have been examined through experiments, and the isotope effect on the collection has been investigated. The collection efficiency is the ratio of collected to supplied moisture, and the moisture supplying rate is in proportion to the humidity and flow rate of feed gas. The experiments show that; the collection efficiency dose not depend on the gas humidity, but is affected by the gas flow rate and by the nozzle-layer distance. The effects of the flow rate and the nozzle position are related to the mass transfer distance from the bulk of gas stream to the desiccant layer surface in the collection cell. The moisture collecting rate is promoted by the approach of the gas stream to the layer surface. An expression of effective separation factor has been derived to explain the isotope effect on the moisture collection. Experimental data distribution of the separation factor have been reasonably simulated by the analysis. (author)

UK public perceptions of shale gas hydraulic fracturing:The role of audience, message and contextual factors on risk perceptions and policy support

OpenAIRE

Whitmarsh, Lorraine; Nash, Nick; Upham, Paul; Lloyd, Alyson; Verdon, James P; Kendall, J.-Michael

2015-01-01

There is growing recognition of the need to understand public attitudes to energy sources, such as shale gas, and to feed these into decision-making. This study represents the first detailed UK experimental survey of public perceptions of shale gas fracking, including analysis of the effects of different messages and the relative influence of different audience, message and contextual factors on support and risk perceptions in respect of shale gas fracking. Using an online survey (N = 1457) o...

Theoretical difference between impact factor and influence factor

Directory of Open Access Journals (Sweden)

Đilda Pečarić

2010-06-01

Full Text Available Bibliometric constructions of "knowledge maps" and "cognitive structures of science" do not differentiate between impact and influence factors. The difference can be constructedaccording to different meaning and interpretation of the terms reference and citation. Reference is "acknowledgment which one author gives to another", whereas citation is "acknowledgment which one document receives from another". Development of Information Science according to period and subject area is analyzed on the corpus of citation literature retrieved from doctoral dissertations in Information Science from 1978 to 2007 at Croatian universities. The research aim is to indicate the difference between document impact factor and author's influence factor (i.e. reference ability to produce effects on actions, behavior, and opinions of authors of doctoral theses. The influence factor serves to distinguish the key role of cited authors in time and according to the duration of the influence (the average age for cited papers of dominant authors in different periods is between eight and ten years. The difference between linear and interactive communication seems vital for the interpretation of cited half-life, i.e. the attitude of one science community towards used information resources and cognitive heritage. The analyzed corpus of 22,210 citations can be divided into three communication phases according to influence factor criteria: in the phase of dialogue and interactive communication 25% of bibliographic units are cited in the first four years; in the second phase another 25% of units are cited from the fifth to the ninth year; after ten years, in the dominant linear communication phase, approximately 30% of units are cited.

Do changes in natural gas futures prices influence changes in natural gas spot prices?

International Nuclear Information System (INIS)

Herbert, J.H.

1993-01-01

Data on natural gas futures and spot markets are examined to determine if variability in price on futures markets influences variability in price on spot markets. Using econometric techniques, it is found that changes in futures contract prices do not precede changes in spot market prices. (Author)

Demotivating factors influencing rubber production workers

Directory of Open Access Journals (Sweden)

Mohammad Reza Iravani

2012-01-01

Full Text Available Motivation is one of the most important factors influencing workers' productivity. An increase in workers' motivation could add more value to organizations' structure and influence the profitability, significantly. In this paper, we study different factors on demotivating workers using questionnaire consist of various questions. The questionnaire is distributed among some employees who work for rubber production units located in Esfahan, Iran. The results of this survey indicate that discrimination on annual job compensation, entrusting responsibilities and unpleasant relationship with family partner are some of the most important factors influencing employees' motivation. While financial factors play important role on increasing employees' motivation, non-financial factors are considered more important.

Factors influencing women's decisions to purchase specific ...

African Journals Online (AJOL)

aimed at identifying the factors that influence women's decisions to purchase specific .... influence of all the factors influencing their decision to purchase a selected .... one free” promotions seemed to have had the greatest influence on this ...

Po2 temperature blood factor for blood gas apparatus.

Science.gov (United States)

Teisseire, B P; Hérigault, R A; Teisseire, L J; Laurent, D N

1984-01-01

PO2 temperature formulae supplied by manufacturers on automatic blood gas apparatus, PO2 corr. = PO2 37 degrees C X 10F X delta T were studied and compared to the experimental determination of the delta log PO2/delta T ratio (Hérigault et al. [10]). Acid-base status at 37 degrees C appeared to have a measurable influence on the PO2 temperature factor; alkalosis increased the delta log PO2/delta T ratio, and the contrary was found for acidosis in comparison with normal acid-base status at 37 degrees C. For the same PO2, measured at 37 degrees C, all the proposed formulae of commercial blood gas automatic apparatus did not give the same temperature corrected PO2. The observed difference between the corrected PO2 may be important and greater than the precision of the initial measurement. To correct the measured PO2 for temperature, a relationship between delta log PO2/delta T and PO2 is proposed, between PO2 zero and PO2 180 mmHg, which takes into account measured pH and PO2 values at 37 degrees C:delta log PO2/delta T = [(-0.35 pH + 0.658) X 10(-4) X PO2] + 0.035.

Metallurgy of gas turbine blades with integral shroud and its influence on blades performance

International Nuclear Information System (INIS)

Mazur, Z.; Marino, C.; Kubiak, J.

1999-01-01

The influence of the microstructure of the gas turbine blades with integral shroud on the blades performance is presented. The analysis of the solidification process of the gas turbine blades during conventionally casting process (equiaxed grains) with all elements which has influence on the mode of its solidification and variation of the microstructure is carried out. Also, the evaluation of the failure of the gas turbine blade is present. A detailed analysis of the blade tip shroud microstructure (presence of the equiaxed and columnar grains) and its influence on the failure initiation and propagation is carried out. Finally, conclusions and some necessary improvements of the blades casting process to prevent blades failures are presented. (Author) 2 refs

THE INFLUENCE OF GAS-DENSITY AND LIQUID PROPERTIES ON BUBBLE BREAKUP

NARCIS (Netherlands)

WILKINSON, PM; VANSCHAYK, A; SPRONKEN, JPM; VANDIERENDONCK, LL

On the basis of a literature review of bubble breakup experiments, it is demonstrated that both liquid viscosity and surface tension have an influence on bubble stability and, thus, bubble breakup, for small as well as large bubbles. Possible influences of the gas properties on bubble breakup have

Factors Influencing Substance Abuse among Undergraduate ...

African Journals Online (AJOL)

The study investigated the factors influencing substance abuse amongundergraduate students in Osun State; Nigeria. A sample of 1, 200undergraduate students were randomly selected from three tertiaryinstitution in Osun State. Factors Influencing Substance Abuse Questionnaire (FISA) was developed by the researcher ...

FACTORS INFLUENCING THE EVOLUTION OF YOUTH TRAVEL

Directory of Open Access Journals (Sweden)

Student Claudia MOISĂ

2010-01-01

Full Text Available Youth travel is an important part of global tourism, consequently, getting to know the evolution of this form of tourism requires an approach of the aspects regarding the permissive and restrictive factors that influence the youth travel dynamic worldwide. In terms of the factors that influence youth travel, we highlighted these two categories of factors (permissive and restrictive and, within each category, we tried to singularize the influence of every factor over youth travel.

FAST PYROLYSIS PROCESS OF ORANGE SOLID WASTE. FACTORS INFLUENCE IN THE PROCESS

Directory of Open Access Journals (Sweden)

Leonardo Aguiar Trujillo

2015-04-01

Full Text Available The orange processing industry generates high volumes of solid residue. This residue has been used in animal feeding and biochemical processes. A possible energy use of the waste can be thermochemical fast pyrolysis process. The objective was to determine the influence of the heating rate and temperature in the process of rapid pyrolysis of orange solid residue. In the process a design, 2k full factorial experiment was used, evaluating the influence of the independent variables and its interactions on the answers, using a 95 % significance level. We found that temperature is the most significant influence on the responses parameter having significant influence on the yields to: gas, coal, tar and the calorific value of the gas and the heating rate does not influence the answers. Finally, the interaction affects the gas yield. The results obtained in this study are: Rgas (19 – 38 %, Rchar (25 – 42 %, Ralq (6 – 12 %, PCIgas entre (140 – 1050 kJ/m3N.

Influence of Ambient Gas on Laser-Induced Breakdown Spectroscopy of Uranium Metal

International Nuclear Information System (INIS)

Zhang Dacheng; Ma Xinwen; Wang Shulong; Zhu Xiaolong

2015-01-01

Laser-induced breakdown spectroscopy (LIBS) is regarded as a suitable method for the remote analysis of materials in any phase, even in an environment with high radiation levels. In the present work we used the third harmonic pulse of a Nd:YAG laser for ablation of uranium metal and measured the plasma emission with a fiber-optic spectrometer. The LIBS spectra of uranium metal and their features in different ambient gases (i.e., argon, neon, oxygen, and nitrogen) at atmospheric pressure were studied. Strong continuum spectrum and several hundreds of emission lines from UI and UII were observed. It is found that the continuum spectrum observed in uranium not only comes from bremsstrahlung emission but is also due to the complex spectrum of uranium. The influence of ambient gas and the gas flow rate for ablation of uranium metal was investigated. The experimental results indicate that the intensity of the uranium lines was enhanced in argon and nitrogen. However, the intensity of uranium lines was decreased in oxygen due to the generation of UO and other oxides. The results also showed that the highest intensity of uranium lines were obtained in argon gas with a gas flow rate above 2.5 L/min. The enhanced mechanism in ambient gas and the influence of the gas flow rate were analyzed in this work. (paper)

Method of evaluating the impact of ERP implementation critical success factors - a case study in oil and gas industries

Science.gov (United States)

Gajic, Gordana; Stankovski, Stevan; Ostojic, Gordana; Tesic, Zdravko; Miladinovic, Ljubomir

2014-01-01

The so far implemented enterprise resource planning (ERP) systems have in many cases failed to meet the requirements regarding the business process control, decrease of business costs and increase of company profit margin. Therefore, there is a real need for an evaluation of the influence of ERP on the company's performance indicators. Proposed in this article is an advanced model for the evaluation of the success of ERP implementation on organisational and operational performance indicators in oil-gas companies. The recommended method establishes a correlation between a process-based method, a scorecard model and ERP critical success factors. The method was verified and tested on two case studies in oil-gas companies using the following procedure: the model was developed, tested and implemented in a pilot gas-oil company, while the results were implemented and verified in another gas-oil company.

Constructing a unique two-phase compressibility factor model for lean gas condensates

Energy Technology Data Exchange (ETDEWEB)

Moayyedi, Mahmood; Gharesheikhlou, Aliashghar [Research Institute of Petroleum Industry (RIPI), Tehran (Iran, Islamic Republic of); Azamifard, Arash; Mosaferi, Emadoddin [Amirkabir University of Technology (AUT), Tehran (Iran, Islamic Republic of)

2015-02-15

Generating a reliable experimental model for two-phase compressibility factor in lean gas condensate reservoirs has always been demanding, but it was neglected due to lack of required experimental data. This study presents the main results of constructing the first two-phase compressibility factor model that is completely valid for Iranian lean gas condensate reservoirs. Based on a wide range of experimental data bank for Iranian lean gas condensate reservoirs, a unique two-phase compressibility factor model was generated using design of experiments (DOE) method and neural network technique (ANN). Using DOE, a swift cubic response surface model was generated for two-phase compressibility factor as a function of some selected fluid parameters for lean gas condensate fluids. The proposed DOE and ANN models were finally validated using four new independent data series. The results showed that there is a good agreement between experimental data and the proposed models. In the end, a detailed comparison was made between the results of proposed models.

Constructing a unique two-phase compressibility factor model for lean gas condensates

International Nuclear Information System (INIS)

Moayyedi, Mahmood; Gharesheikhlou, Aliashghar; Azamifard, Arash; Mosaferi, Emadoddin

2015-01-01

Generating a reliable experimental model for two-phase compressibility factor in lean gas condensate reservoirs has always been demanding, but it was neglected due to lack of required experimental data. This study presents the main results of constructing the first two-phase compressibility factor model that is completely valid for Iranian lean gas condensate reservoirs. Based on a wide range of experimental data bank for Iranian lean gas condensate reservoirs, a unique two-phase compressibility factor model was generated using design of experiments (DOE) method and neural network technique (ANN). Using DOE, a swift cubic response surface model was generated for two-phase compressibility factor as a function of some selected fluid parameters for lean gas condensate fluids. The proposed DOE and ANN models were finally validated using four new independent data series. The results showed that there is a good agreement between experimental data and the proposed models. In the end, a detailed comparison was made between the results of proposed models

Factors influencing knowledge and practice of exclusive ...

African Journals Online (AJOL)

Factors influencing knowledge and practice of exclusive breastfeeding in Nyando ... The overall objective of this study was to determine factors influencing the ... EBF and its benefits), pre lacteal feeds and exclusive breastfeeding consistency.

Overview of the U.S. gas industry

International Nuclear Information System (INIS)

Ramsey, J.

1992-01-01

Natural gas supply and demand is first reviewed in a discussion of the current state of the gas industry in the USA. The deliverability surplus is declining due to factors including a decline in drilling and workover rig activity and a continuing growth in demand at least partly caused by new markets for gas such as gas-fired power generation. The environmental movement, influencing laws favoring clean-burning fuels such as gas, is an additional influence on future demand. A key factor in the gas industry's ability to keep demand growing is how safely and successfully it can implement many aspects of Federal Energy Regulatory Commission Order 636 regarding pipeline restructuring. It is expected that this restructuring will see changes in gas transport and marketing, including an increasing role for supply aggregators and capacity brokers and an abandonment of the merchant function by some pipeline companies. A significant change in the last year or so is that US producers are willing and able to enter into long term supply contracts. Finally, gas production from the Gulf of Mexico basin is expected to continue to produce 2-2.5 trillion ft 3 /y for years to come, despite being a mature area for gas production

Sound propagation through a rarefied gas. Influence of the gas–surface interaction

International Nuclear Information System (INIS)

Kalempa, Denize; Sharipov, Felix

2012-01-01

Highlights: ► Non-equilibrium gas properties due to sound propagation. ► Influence of gas–surface accommodation coefficients. ► Heat transfer due to thermo-acoustic waves. ► Reciprocal relations. ► Range of validity of the Navier–Stokes equations. - Abstract: Acoustic waves propagating through a rarefied gas between two plates induced by both oscillation and unsteady heating of one of them are considered on the basis of a model of the linearized Boltzmann equation. The gas flow is considered as fully established so that the dependence of all quantities on time is harmonical. The problem is solved for several values of two main parameters determining its solution, namely, the gas rarefaction defined as the ratio of the distance between the plates to the equivalent free path of gaseous molecules, and the oscillation parameter given as the ratio of the intermolecular collision frequency to the wave frequency. The reciprocal relation for such flows is obtained and verified numerically. An influence of the gas–surface accommodation coefficients on the wave characteristics is analyzed by employing the Cercignani–Lampis scattering kernel to the boundary conditions.

Factors that influencing veterinary drug’s metabolisation

Directory of Open Access Journals (Sweden)

Cristina, Romeo T.

2007-12-01

Full Text Available The paper wants to make a recall for the vet practitioners, of the main veterinary drug's metabolism rate influencing factors. Among the most important physiological factors (pharmacokinetics, sanguine flow and urinary ones, plasmatic proteins binding, enzymatic induction and inhibition are essential. Between the animal’s bounded factors more important are: species, individuality, age, sex, pregnancy, alimentation, genetic factors, and health status and from exogenous factors, daily rhythm, influences of chemical compounds and of the stress are presented.

An approach for prediction of petroleum production facility performance considering Arctic influence factors

International Nuclear Information System (INIS)

Gao Xueli; Barabady, Javad; Markeset, Tore

2010-01-01

As the oil and gas (O and G) industry is increasing the focus on petroleum exploration and development in the Arctic region, it is becoming increasingly important to design exploration and production facilities to suit the local operating conditions. The cold and harsh climate, the long distance from customer and suppliers' markets, and the sensitive environment may have considerable influence on the choice of design solutions and production performance characteristics such as throughput capacity, reliability, availability, maintainability, and supportability (RAMS) as well as operational and maintenance activities. Due to this, data and information collected for similar systems used in a normal climate may not be suitable. Hence, it is important to study and develop methods for prediction of the production performance characteristics during the design and operation phases. The aim of this paper is to present an approach for prediction of the production performance for oil and gas production facilities considering influencing factors in Arctic conditions. The proportional repair model (PRM) is developed in order to predict repair rate in Arctic conditions. The model is based on the proportional hazard model (PHM). A simple case study is used to demonstrate how the proposed approach can be applied.

Numerical Assessment of the Influences of Gas Pressure on Coal Burst Liability

Directory of Open Access Journals (Sweden)

Haochen Zhao

2018-01-01

Full Text Available When coal mines exploit deep seams with high-gas content, risks are encountered due to the additional high likelihood of rock bursting potential problems. The bursts of coal pillars usually lead to severe fatalities, injuries, and destruction of property, including impeding access to active mine workings underground. The danger exists given that conditions in the already highly brittle coal material can be exacerbated by high stress and high gas pressure conditions. It is thus critical to develop methods that improve current understanding about bursting liability, and techniques to forecast or prevent coal bursting in underground coal mines. This study uses field data from a deep coal mine, and numerical modeling to investigate the effects of gas pressure and mechanical compressive stresses on coal bursting liability in high gas content coal seams. The bursting energy index is adopted to determine the coal bursting liability under high gas pressure conditions. The adopted methodology uses a two-staged approach comprising investigating the influence of gas pressure on the bursting liability of coal pillar, and the influence of the gas pressure on the resulting pillar failure mode. Based on numerical simulations of coal pillars, correlations are observed between the magnitudes of gas pressures and the bursting energy index. Irrespective of pillar size, failure time is shortest when the gas pressure achieves a threshold value between 50 kPa to 70 kPa. At 50 kPa, the value of the BEI increases by 50% going from the 4 m pillar to the 6 m pillar. The value of the BEI increases by 43% going from the 6 m high pillar to the 8 m high pillar at 50 kPa. When pillars fail there is a degree of stress relief leading to a reduction in bursting liability. The results suggest that before 50 kPa, pillar failure is largely due to mechanical loading. After 50 kPa, pillar failure is largely due to excessive gas pressures.

Factors influencing customer satisfaction with reference and ...

African Journals Online (AJOL)

This paper examines factors influencing customer satisfaction with reference and information services in an academic environment. The paper identifies types of reference services in libraries, factors influencing customer satisfaction and dissatisfaction with reference and information services and suggested the way forward ...

Factors Influencing Endometrial Thickness in Postmenopausal Women

African Journals Online (AJOL)

Background: Cut‑off values for endometrial thickness (ET) in asymptomatic postmenopausal woman have been standardized. However, there are no comprehensive studies to document how various factors can influence the ET after the age of menopause. Aim: To study the various factors influencing the ET in ...

Factors Influencing Livelihood Diversification among Rural Farmers ...

African Journals Online (AJOL)

This research study was set out to analyze factors influencing rural farmer's engagement in livelihood diversification in the study area. The specific objectives were; to identify the different levels of farmers' engagement in livelihood diversification, determine the socio-demographic factors or forces that influence farmers' ...

Landfill gas: development guidelines

International Nuclear Information System (INIS)

1996-11-01

A Guide produced as part of the UK DTI's New and Renewable Energy Programme provides information which forms a framework enabling landfill gas to be exploited fully as a renewable energy resource. The eight chapters cover the resource base of landfill gas in the UK in the wider context, the technology for energy recovery from landfill gas, the utilisation options for landfill gas, the various project development arrangements and their implementation, the assessment of a site's landfill gas resource, the factors which influence the project economies, financing aspects and the management of project liabilities and finally the national waste disposal policy and required consents followed by the overall process for project mobilisation. (UK)

Influence of heat exchange of reservoir with rocks on hot gas injection via a single well

Science.gov (United States)

Nikolaev, Vladimir E.; Ivanov, Gavril I.

2017-11-01

In the computational experiment the influence of heat exchange through top and bottom of the gas-bearing reservoir on the dynamics of temperature and pressure fields during hot gas injection via a single well is investigated. The experiment was carried out within the framework of modified mathematical model of non-isothermal real gas filtration, obtained from the energy and mass conservation laws and the Darcy law. The physical and caloric equations of state together with the Newton-Riemann law of heat exchange of gas reservoir with surrounding rocks, are used as closing relations. It is shown that the influence of the heat exchange with environment on temperature field of the gas-bearing reservoir is localized in a narrow zone near its top and bottom, though the size of this zone is increased with time.

Natural gas pricing

International Nuclear Information System (INIS)

Freedenthal, C.

1993-01-01

Natural gas pricing is the heart and soul of the gas business. Price specifically affects every phase of the industry. Too low a price will result in short supplies as seen in the mid-1970s when natural gas was scarce and in tight supply. To fully understand the pricing of this energy commodity, it is important to understand the total energy picture. In addition, the effect and impact of world and US economies, and economics in general are crucial to understanding natural gas pricing. The purpose of this presentation will be to show the parameters going into US natural gas pricing including the influence of the many outside industry factors like crude oil and coal pricing, market drivers pushing the gas industry, supply/demand parameters, risk management for buyers and sellers, and other elements involved in pricing analysis

Experimental study of influence characteristics of flue gas fly ash on acid dew point

Science.gov (United States)

Song, Jinhui; Li, Jiahu; Wang, Shuai; Yuan, Hui; Ren, Zhongqiang

2017-12-01

The long-term operation experience of a large number of utility boilers shows that the measured value of acid dew point is generally lower than estimated value. This is because the influence of CaO and MgO on acid dew point in flue gas fly ash is not considered in the estimation formula of acid dew point. On the basis of previous studies, the experimental device for acid dew point measurement was designed and constructed, and the acid dew point under different smoke conditions was measured. The results show that the CaO and MgO in the flue gas fly ash have an obvious influence on the acid dew point, and the content of the fly ash is negatively correlated with the temperature of acid dew point At the same time, the concentration of H2SO4 in flue gas is different, and the acid dew point of flue gas is different, and positively correlated with the acid dew point.

Factors influencing choice of oral hygiene products by dental ...

African Journals Online (AJOL)

Background: Several factors, such as cost, branding, packaging and family influence, had been implicated as influencing the choice of toothpastes and toothbrushes by individuals. Media advertisement is also considered a very strong factor influencing consumer's choice. Aim: To assess the extent to which some factors ...

Beyond the learning curve: factors influencing cost reductions in photovoltaics

International Nuclear Information System (INIS)

Nemet, Gregory F.

2006-01-01

The extent and timing of cost-reducing improvements in low-carbon energy systems are important sources of uncertainty in future levels of greenhouse-gas emissions. Models that assess the costs of climate change mitigation policy, and energy policy in general, rely heavily on learning curves to include technology dynamics. Historically, no energy technology has changed more dramatically than photovoltaics (PV), the cost of which has declined by a factor of nearly 100 since the 1950s. Which changes were most important in accounting for the cost reductions that have occurred over the past three decades? Are these results consistent with the notion that learning from experience drove technical change? In this paper, empirical data are assembled to populate a simple model identifying the most important factors affecting the cost of PV. The results indicate that learning from experience, the theoretical mechanism used to explain learning curves, only weakly explains change in the most important factors-plant size, module efficiency, and the cost of silicon. Ways in which the consideration of a broader set of influences, such as technical barriers, industry structure, and characteristics of demand, might be used to inform energy technology policy are discussed

ENERGY EFFICIENCY. TRENDS AND INFLUENCE FACTORS

Directory of Open Access Journals (Sweden)

Zizi GOSCHIN

2006-12-01

Full Text Available Energy efficiency is correlated with many factors of influence: Gross National Income per capita, energy imports (% of energy use, renewable combustible and waste (% of total, energy use per capita, services as % of GDP and others. In this paper we are testing a model of piecewise linear regression with breakpoint in order to measure the influence of these factors on the variation of GDP per unit of energy use in Europe in the year 2003.

Emission quantification using the tracer gas dispersion method: The influence of instrument, tracer gas species and source simulation

DEFF Research Database (Denmark)

Delre, Antonio; Mønster, Jacob; Samuelsson, Jerker

2018-01-01

The tracer gas dispersion method (TDM) is a remote sensing method used for quantifying fugitive emissions by relying on the controlled release of a tracer gas at the source, combined with concentration measurements of the tracer and target gas plumes. The TDM was tested at a wastewater treatment...... plant for plant-integrated methane emission quantification, using four analytical instruments simultaneously and four different tracer gases. Measurements performed using a combination of an analytical instrument and a tracer gas, with a high ratio between the tracer gas release rate and instrument...... precision (a high release-precision ratio), resulted in well-defined plumes with a high signal-to-noise ratio and a high methane-to-tracer gas correlation factor. Measured methane emission rates differed by up to 18% from the mean value when measurements were performed using seven different instrument...

An investigation of factors influencing indoor radon concentrations

International Nuclear Information System (INIS)

Majborn, B.; Soerensen, A.; Nielsen, S.P.; Boetter-Jensen, L.

1988-05-01

Variations in indoor radon concentrations and some influencing factors have been studied during a two-year period (1986-1987) in 16 almost identical single-family houses.The annual average radon concentration in the houses varied from about 50 to about 400 Bq/m 3 . Variations in soil characteristics and radon concentration in soil gas could not be directly related to the variations of the average indoor radon concentrations. Most of the houses showed a ''normal'' seasonal variation of the radon concentration with a maximum in the winter and minimum in the summer. A deviating seasonal variation was found in three of the houses. Hourly data obtained in one unoccupied house during a period of 2-1/2 months showed no or only weak correlations between the indoor radon concentration and meteorological factors. However, for most of the houses, the seasonal variation of the indoor radon concentration was well correlated with the average indoor-outdoor temperature difference on a 2-month basis. It was demonstrated that the radon concentration can be strongly reduced in the Risoe houses if a district-heating duct, which is connected to all the houses, is ventilated, so that a slightly lowered pressure is maintained in the duct. 5 taps., 24 ill. (author)

INTEGRAL INDICATORS OF THE INFLUENCE OF FORMULATECHNOLOGICAL FACTORS ON THE CEMENT MATRIX OF CONCRETE STRUCTURE FORMATION FOR INJECTION WITH TWO-STEP EXPANSION

Directory of Open Access Journals (Sweden)

T. N. Zhilnikova

2016-01-01

Full Text Available Objectives. The formation of the structure of hardened concrete grouting with two-stage expansion is a complex process that is influenced by many factors, both of a prescriptive nature (composition and additive dosage, mineralogical composition of Portland cement clinker, concrete composition, the presence of chemical additives and in terms of process (the fineness of cement grinding, temperature of curing, etc.. Methods. In order to assess the impact of the above factors, the article proposes the introduction of a number of integrated indicators being characterised as a process in which influences are shown alongside the factor generating the influence. For the evaluation of the influence of different factors on the process of gas generation, an effectiveness ratio of gas generation is proposed by the authors. Results. The article presents the results of an investigation into the influence of the amount of gassing agent and the type and dosage of superplasticiser on the process of gassing by means of the displacement method on the mortar mix. The authors similarly propose a expansion efficiency coefficient. The article presents the results of the investigation into the influence of the amount of gassing agent, the presence and amount of superplasticiser, the sand/cement ratio, aggregate size and water-cement ratio during the first stage of expansion of the mixture. The authors propose a formula for describing the dependence of the relative expansion deformations on the concentration of filler. In order to assess the conditions in which a mixture is present, it is proposed to use an indicator consisting in the constraint expansion coefficient. Conclusion. Use of the hardening condition coefficient is proposed as a means of accounting for the effect of curing conditions on the strength of the concrete grouting with two-stage expansion. The authors recommend taking the introduction of correction factors into account when considering the impact of

Gas jet structure influence on high harmonic generation

OpenAIRE

Grant-Jacob, James; Mills, Benjamin; Butcher, Thomas J.; Chapman, Richard T.; Brocklesby, William S.; Frey, Jeremy G.

2011-01-01

Gas jets used as sources for high harmonic generation (HHG) have a complex three-dimensional density and velocity profile. This paper describes how the profile influences the generation of extreme-UV light. As the position of the laser focus is varied along the jet flow axis, we show that the intensity of the output radiation varies by approximately three times, with the highest flux being observed when the laser is focused into the Mach disc. The work demonstrated here will aid in the optimi...

Increased stray gas abundance in a subset of drinking water wells near Marcellus shale gas extraction.

Science.gov (United States)

Jackson, Robert B; Vengosh, Avner; Darrah, Thomas H; Warner, Nathaniel R; Down, Adrian; Poreda, Robert J; Osborn, Stephen G; Zhao, Kaiguang; Karr, Jonathan D

2013-07-09

Horizontal drilling and hydraulic fracturing are transforming energy production, but their potential environmental effects remain controversial. We analyzed 141 drinking water wells across the Appalachian Plateaus physiographic province of northeastern Pennsylvania, examining natural gas concentrations and isotopic signatures with proximity to shale gas wells. Methane was detected in 82% of drinking water samples, with average concentrations six times higher for homes gas wells (P = 0.0006). Ethane was 23 times higher in homes gas wells (P = 0.0013); propane was detected in 10 water wells, all within approximately 1 km distance (P = 0.01). Of three factors previously proposed to influence gas concentrations in shallow groundwater (distances to gas wells, valley bottoms, and the Appalachian Structural Front, a proxy for tectonic deformation), distance to gas wells was highly significant for methane concentrations (P = 0.007; multiple regression), whereas distances to valley bottoms and the Appalachian Structural Front were not significant (P = 0.27 and P = 0.11, respectively). Distance to gas wells was also the most significant factor for Pearson and Spearman correlation analyses (P gas wells was the only statistically significant factor (P gas (4)He to CH4 in groundwater were characteristic of a thermally postmature Marcellus-like source in some cases. Overall, our data suggest that some homeowners living gas wells have drinking water contaminated with stray gases.

Risk factors in stock returns of Canadian oil and gas companies

International Nuclear Information System (INIS)

Sadorsky, P.

2001-01-01

This paper uses a multifactor market model to estimate the expected returns to Canadian oil and gas industry stock prices. Results are presented to show that exchange rates, crude oil prices and interest rates each have large and significant impacts on stock price returns in the Canadian oil and gas industry. In particular, an increase in the market or oil price factor increases the return to Canadian oil and gas stock prices while an increase in exchange rates or the term premium decreases the return to Canadian oil and gas stock prices. Furthermore, the oil and gas sector is less risky than the market and its moves are pro-cyclical. This suggests that Canadian oil and gas stocks may not be a good hedge against inflation

Influence of gas inlet angle on the mixing process in a Venturi mixer

Directory of Open Access Journals (Sweden)

Romańczyk Mathias

2017-01-01

Full Text Available In this paper numerical analysis were performed to investigate the influence of gas inlet angle on mixing process in a Venturi mixer. Performance of an industrial gas engine depends significantly on the quality of mixing air and fuel; therefore, on the homogeneity of the mixture. In addition, there must be a suitable, adapted to the current load of fuel, air ratio. Responsible for this fact, among others, is the mixer located before entering the combustion chamber of the engine. Incorrect mixture proportion can lead to unstable operation of the engine, as well as higher emissions going beyond current environmental standards in the European Union. To validate the simulation the Air-Fuel Ratio (AFR was mathematically calculated for the air-fuel mixture of lean combustion gas engine. In this study, an open source three-dimensional computational fluid dynamics (CFD modelling software OpenFOAM has been used, to investigate and analyse the influence of different gas inlet angles on mixer characteristics and their performances. Attention was focused on the air-fuel ratio changes, pressure loss, as well as improvement of the mixing quality in the Venturi mixer.

FACTORS INFLUENCING HUMAN RELIABILITY OF HIGH TEMPERATURE GAS COOLED REACTOR OPERATION

Directory of Open Access Journals (Sweden)

Sigit Santoso

2016-10-01

ABSTRAK Peran dan tindakan operator pada reaktor berpendingin gas akan berbeda dengan peran operator pada operasi tipe reaktor lain. Analisis unjuk kerja operator dan faktor yang berpengaruh dapat dilakukan secara komprehensif melalui analisis keandalan manusia(HRA. Melalui HRA dampak dari kesalahan manusia pada sistem maupun cara untuk mengurangi dampak dan frekuensi kesalahan dapat diketahui. Makalah membahas faktor yang berpengaruh pada tindakan operator, yaitu pada kejadian kecelakaan pendingin reaktor gas bersuhu tinggi-HTGR. Analisis untuk kualifikasi faktor pembentuk kinerja(PSF dilakukan berdasarkan kurva keandalan fungsi waktu, dan metode keandalan manusia yang dikembangkan berdasar pada aspek kognitif yaitu Cognitive Reliability and Error Analysis Method (CREAM. Hasil analisis berdasar kurva keandalan fungsi waktu menunjukkan komponen waktu berkontribusi positif pada peningkatan keandalan operator (PSF<1 pada kondisi semua fitur keselamatan berfungsi sesuai rancangan. Sedangkan pada metoda analisis dengan pendekatan kognitif CREAM diketahui selain faktor ketersediaan waktu, faktor pelatihan dan rancangan HMI juga berkontribusi meningkatkan keandalan operator. Faktor pembentuk kinerja keseluruhan diketahui sebesar 0,25 dengan faktor kontribusi positif dominan atau berpengaruh pada penurunan kesalahan manusia adalah ketersediaan waktu (PSF=0,01, dan faktor kontribusi negatif dominan adalah prosedur dan siklus kerja (PSF=5. Nilai PSF tersebut sebagai faktor pengali dalam perhitungan probabilitas kesalahan manusia. Analisis faktor pembentuk kinerja perlu dikembangkan pada skenario kejadian lain untuk selanjutnya digunakan untuk perhitungan dan analisis keandalan manusia yang komprehensif dan perancangan sistem interaksi manusia mesin di ruang kendali. Kata kunci: PSF, HTGR, operator, ruang kendali, keandalan manusia

Simulation of permafrost changes due to technogenic influences of different ingeneering constructions used in nothern oil and gas fields

Science.gov (United States)

Filimonov, M. Yu; Vaganova, N. A.

2016-10-01

Significant amount of oil and gas is producted in Russian Federation on the territories with permafrost soils. Ice-saturated rocks thawing due to global warming or effects of various human activity will be accompanied by termocarst and others dangerous geological processes in permafrost. Design and construction of well pads in permafrost zones have some special features. The main objective is to minimize the influence of different heat sources (engineering objects) inserted into permafrost and accounting long-term forecast of development of permafrost degradation due to different factors in particular generated by human activity. In this work on the basis a mathematical model and numerical algorithms approved on 11 northern oil and gas fields some effects obtained by carrying out numerical simulations for various engineering systems are discussed.

THE INFLUENCE OF AEROSOL GAS-DYNAMIC SUSPENSION CLEANING ON SURFACE OF THE AIRCRAFT PARTS

Directory of Open Access Journals (Sweden)

Vitaly D. Hizhko

2008-02-01

Full Text Available  The specificity of the surface microgeometry formation under the influence of aerosol gas-dynamic suspension flow was considered. The composition and character of metallic surface layer formation of aircraft parts was investigated. The possibility of surface material composition and properties adjustment changing aerosol gas-dynamic suspension flow parameters was determined. The hypothesis about the possibility of using aerosol gas-dynamic suspension flow to form corrosion-resistant coating on the detail metallic surfaces was set up.

A Numerical Study of Factors Affecting Fracture-Fluid Cleanup and Produced Gas/Water in Marcellus Shale: Part II

Energy Technology Data Exchange (ETDEWEB)

Seales, Maxian B.; Dilmore, Robert; Ertekin, Turgay; Wang, John Yilin

2017-04-01

Horizontal wells combined with successful multi-stage hydraulic fracture treatments are currently the most established method for effectively stimulating and enabling economic development of gas bearing organic-rich shale formations. Fracture cleanup in the Stimulated Reservoir Volume (SRV) is critical to stimulation effectiveness and long-term well performance. However, fluid cleanup is often hampered by formation damage, and post-fracture well performance frequently falls below expectations. A systematic study of the factors that hinder fracture fluid cleanup in shale formations can help optimize fracture treatments and better quantify long term volumes of produced water and gas. Fracture fluid cleanup is a complex process influenced by multi-phase flow through porous media (relative permeability hysteresis, capillary pressure etc.), reservoir rock and fluid properties, fracture fluid properties, proppant placement, fracture treatment parameters, and subsequent flowback and field operations. Changing SRV and fracture conductivity as production progresses further adds to the complexity of this problem. Numerical simulation is the best, and most practical approach to investigate such a complicated blend of mechanisms, parameters, their interactions, and subsequent impact on fracture fluid cleanup and well deliverability. In this paper, a 3-dimensional, 2-phase, dual-porosity model was used to investigate the impact of multiphase flow, proppant crushing, proppant diagenesis, shut-in time, reservoir rock compaction, gas slippage, and gas desorption on fracture fluid cleanup, and well performance in Marcellus shale. The research findings have shed light on the factors that substantially constrains efficient fracture fluid cleanup in gas shales, and provided guidelines for improved fracture treatment designs and water management.

An analysis of factors that influence the technical efficiency of Malaysian thermal power plants

International Nuclear Information System (INIS)

See, Kok Fong; Coelli, Tim

2012-01-01

The main objectives of this paper are to measure the technical efficiency levels of Malaysian thermal power plants and to investigate the degree to which various factors influence efficiency levels in these plants. Stochastic frontier analysis (SFA) methods are applied to plant-level data over an eight year period from 1998 to 2005. This is the first comprehensive analysis (to our knowledge) of technical efficiency in the Malaysian electricity generation industry using parametric method. Our empirical results indicate that ownership, plant size and fuel type have a significant influence on technical efficiency levels. We find that publicly-owned power plants obtain average technical efficiencies of 0.68, which is lower than privately-owned power plants, which achieve average technical efficiencies of 0.88. We also observe that larger power plants with more capacity and gas-fired power plants tend to be more technically efficient than other power plants. Finally, we find that plant age and peaking plant type have no statistically significant influence on the technical efficiencies of Malaysian thermal power plants. - Highlights: ► We examine the technical efficiency (TE) levels of Malaysian thermal power plants. ► We also investigate the degree to which various factors influence efficiency levels in these plants. ► Stochastic frontier analysis methods are used. ► Average plant would have to increase their TE level by 21% to reach the efficient frontier. ► Ownership, plant size and fuel type have a significant influence on the TE levels.

Influence of smoking and obesity on alveolar-arterial gas pressure differences and dead space ventilation at rest and peak exercise in healthy men and women.

Science.gov (United States)

Gläser, Sven; Ittermann, Till; Koch, Beate; Schäper, Christoph; Felix, Stephan B; Völzke, Henry; Könemann, Raik; Ewert, Ralf; Hansen, James E

2013-06-01

Besides exercise intolerance, the assessment of ventilatory and perfusion adequacy allows additional insights in the disease pathophysiology in many cardiovascular or pulmonary diseases. Valid measurements of dead space/tidal volume ratios (VD/VT), arterial (a') - end-tidal (et) carbon dioxide (CO2) and oxygen (O2) pressure differences (p(a'-et)CO2) and (p(et-a')O2), and alveolar (A)-a' O2 pressure differences (p(A-a')O2) require using blood samples in addition to gas exchange analyses on a breath-by-breath-basis. Smoking and nutritional status are also important factors in defining disorders. Using a large healthy population we considered the impact of these factors to develop useful prediction equations. Incremental cycle exercise protocols were applied to apparently healthy volunteer adults who did not have structural heart disease or echocardiographic or lung function pathologies. Age, height, weight, and smoking were analysed for their influence on the target parameters in each gender. Reference values were determined by regression analyses. The final study sample consisted of 476 volunteers (190 female), aged 25-85 years. Smoking significantly influences p(A-a')O2 and p(a'-et)CO2 at rest and peak exercise, and VD/VT during exercise. Obesity influences upper limits of VD/VT, p(a'-et)CO2 and p(et-a')O2 at rest as well as p(A-a')O2 and p(et-a')O2 at exercise. Reference equations for never-smokers as well as for apparently healthy smokers considering influencing factors are given. Gender, age, height, weight, and smoking significantly influence gas exchange. Considering all of these factors this study provides a comprehensive set of reference equations derived from a large number of participants of a population-based study. Copyright © 2013 Elsevier Ltd. All rights reserved.

Friction factor in smooth and rough gas pipelines. An experimental study

Energy Technology Data Exchange (ETDEWEB)

Sletfjerding, Elling

1999-01-01

Flow of high pressure natural gas in pipelines has been studied experimentally. Pipeline flow of natural gas is characterized by high Reynolds numbers due to the low viscosity and relatively high density of pressurized gas. Friction factor correlations for high Reynolds number flow in smooth and rough pipes were developed. To study the effect of wall roughness on pipe flow at high Reynolds numbers 8 test pipes with different wall roughness were fabricated. The wall roughness in 6 of the test pipes was varied by adding glass beads in an epoxy coating applied on the pipe wall. One test pipe was treated with a smooth epoxy coating and one was left untreated. The inner diameter of the test pipes was 150 mm. Measurements of the pressure drop in the pipes were made in a closed flow loop at line pressures of 25, 70, 95 and 120 bar. The Reynolds number of the flow was varied in the range 2-30 million. The wall roughness of the test pipes was measured with a stylus instrument. Correlations between the directly measured wall roughness and the friction factor at fully rough flow conditions were presented. To characterize the wall roughness of the test pipes a parameter combining a measure of the roughness height (R{sub q}) and the texture of the wall roughness was used. Due to the high Reynolds number of the flow, minute irregularities of the pipe wall had significant effect on the friction factor in the pipe. The measured wall roughness of the test pipes was in the range 1.4 < R{sub q} <31 (my)m. The flow experiments in test pipes was compared with data from operating pipelines in the North Sea. The offshore pipelines are coated with the same epoxy coating as used in the test pipes. The friction factor in coated offshore gas pipelines showed smooth behavior when the additional pressure drop due to welds were accounted for. The study of coated gas pipelines showed that the friction factor was significantly lower than predicted by standard correlations.

Real-Gas Correction Factors for Hypersonic Flow Parameters in Helium

Science.gov (United States)

Erickson, Wayne D.

1960-01-01

The real-gas hypersonic flow parameters for helium have been calculated for stagnation temperatures from 0 F to 600 F and stagnation pressures up to 6,000 pounds per square inch absolute. The results of these calculations are presented in the form of simple correction factors which must be applied to the tabulated ideal-gas parameters. It has been shown that the deviations from the ideal-gas law which exist at high pressures may cause a corresponding significant error in the hypersonic flow parameters when calculated as an ideal gas. For example the ratio of the free-stream static to stagnation pressure as calculated from the thermodynamic properties of helium for a stagnation temperature of 80 F and pressure of 4,000 pounds per square inch absolute was found to be approximately 13 percent greater than that determined from the ideal-gas tabulation with a specific heat ratio of 5/3.

Factors Influencing Colorectal Cancer Screening Participation

Directory of Open Access Journals (Sweden)

Antonio Z. Gimeno García

2012-01-01

Full Text Available Colorectal cancer (CRC is a major health problem worldwide. Although population-based CRC screening is strongly recommended in average-risk population, compliance rates are still far from the desirable rates. High levels of screening uptake are necessary for the success of any screening program. Therefore, the investigation of factors influencing participation is crucial prior to design and launches a population-based organized screening campaign. Several studies have identified screening behaviour factors related to potential participants, providers, or health care system. These influencing factors can also be classified in non-modifiable (i.e., demographic factors, education, health insurance, or income and modifiable factors (i.e., knowledge about CRC and screening, patient and provider attitudes or structural barriers for screening. Modifiable determinants are of great interest as they are plausible targets for interventions. Interventions at different levels (patient, providers or health care system have been tested across the studies with different results. This paper analyzes factors related to CRC screening behaviour and potential interventions designed to improve screening uptake.

Regulatory frameworks for Natural Gas DSM in Canada : exploring design options, influences and characteristics of success

International Nuclear Information System (INIS)

Simon, J.

2005-11-01

There are 6 natural gas distribution companies in Canada with formal, ratepayer-funded demand side management (DSM) programs. However, the general characteristics and regulatory environment of these companies varies greatly. With the exception of Enbridge Gas and Union Gas, each company is located in a different province, which means that companies face different energy regulations and energy efficiency policies. An introduction to DSM and its regulation in Canada was presented, as well as an overview of common models in Canada, and the general considerations involved in designing a regulatory framework were discussed. Regulatory design options for natural gas demand-side management regulatory frameworks were evaluated. The major factors that influence the frameworks were analyzed, and the characteristics of a successful DSM program were outlined. The research methodology for this paper consisted of telephone interviews with policy-makers, regulators, non-governmental organizations and regulatory affairs personnel from local distribution companies. Results indicated the importance of a clear policy framework that provides direction for DSM designers. The common elements for a successful regulatory framework were considered to be a systems approach to the definition of DSM; clear regulatory rules; a long-term predictable source and level of DSM funding that reflected the maturity of the DSM market; an alignment of government energy policies and DSM regulatory frameworks; and recognition and capturing of the broad range of DSM benefits

Does the Swedish consumer's choice of food influence greenhouse gas emissions?

International Nuclear Information System (INIS)

Wallen, Anna; Brandt, Nils; Wennersten, Ronald

2004-01-01

Consumer's choice of food can influence the environment. In Sweden, in common with many other countries, consumers need to be given information so they can make environmentally informed shopping choices. However, what is the most advantageous dietary choice to lower greenhouse emissions? This study investigates the greenhouse gas emissions associated with food production for food consumed in Sweden annually. Specifically, this study compares greenhouse gas emissions associated with a nutritionally and environmentally sustainable diet with the average consumption of food in Sweden 1999. The study concludes that the change in energy use and greenhouse gas emission associated with this change of diet is negligible. Lowering greenhouse gas emissions by changing food production processes results in more profound changes than teaching consumers to make environmentally correct choices. There is a basic need for a reduction or a replacement of the use of fossil fuels to produce and distribute our food in order to reach any significant reduction in the emission of greenhouse gases. Swedish agricultural policy does not provide ways to reduce greenhouse gas emissions. In Sweden therefore there is an immediate need to design policy instruments with the primary aim of reducing the greenhouse effect

Influence of Rain Tree Pod Meal Supplementation on Rice Straw Based Diets Using Gas Fermentation Technique

Directory of Open Access Journals (Sweden)

N. Anantasook

2012-03-01

Full Text Available The objective of this study was to determine the roughage to concentrate (R:C ratio with rain tree pod meal (RPM supplementation on in vitro fermentation using gas production technique. The experiment design was a 6×4 factorial arrangement in a CRD. Factor A was 6 levels of R:C ratio (100:0, 80:20, 60:40, 40:60, 20:80 and 0:100 and factor B was 4 levels of RPM (0, 4, 8 and 12 mg. It was found that gas kinetic, extent rate (c was linearly increased (p<0.01 with an increasing level of concentrate while cumulative gas production (96 h was higher in R:C of 40:60. In addition, interaction of R:C ratio and RPM level affected NH3-N and IVDMD and were highest in R:C of 0:100 with 0, 4 mg of RPM and 40:60 with 8 mg of RPM, respectively. Moreover, interaction of R:C ratio and RPM level significantly increased total volatile fatty acids and propionate concentration whereas lower acetate, acetate to propionate ratios and CH4 production in R:C of 20:80 with 8 mg of RPM. Moreover, the two factors, R:C ratio and RPM level influenced the protozoal population and the percentage of methanogens in the total bacteria population. In addition, the use of real-time PCR found that a high level of concentrate in the diet remarkably decreased three cellulolytic bacteria numbers (F. succinogenes, R. flavefaciens and R. albus. Based on this study, it is suggested that the ratio of R:C at 40:60 and RPM level at 12 mg could improve ruminal fluid fermentation in terms of reducing fermentation losses, thus improving VFA profiles and ruminal ecology.

Opportunities of influence of plasma streams formed in IKA with continuos nor king gas filling en the surface of materials

International Nuclear Information System (INIS)

Useinov, B.M.; Useinova, A.M.; Amrenova, A.U.; Pusankov, S.A.; Sartin, S.A.; Virko, P.G.

2001-01-01

The results of the investigation of influence of plasma stream formed in IKA with continuous working gas filling on the surface of stainless steel 12X18H10T and aluminum are given in this article. It is shown here that the effect of influence of plasma stream on the surface of materials depends on the way of working gas filling. There is the comparison of influence of plasma stream formed in plasma accelerator with impulse and continuous working gas filling

Factors influencing pollutant gas emissions of VOC recuperative incinerators-Large-scale parametric study

International Nuclear Information System (INIS)

Salvador, S.; Commandre, J.-M.; Kara, Y.

2006-01-01

This work establishes quantitative links between the operation parameters-plus one geometrical parameter-and the gas pollutant emissions of a recuperative incinerator (RI) of volatile organic compounds (VOCs). Using experimental design methodology, and based on a large number of experiments carried out on a half-industrial-scale pilot unit, mathematical expressions are established to calculate each of the pollutant emissions from the value of all the operation and design parameters. The gas emissions concerned are total hydrocarbons, and CO and NO x emissions, while the control parameters are the flow rate of the treated air flow, the concentration of VOCs in the air flow, the preheating temperature of the flow, and the temperature at the exit of the combustion chamber. One design parameter-the aperture of the diaphragms-is also considered. We show that the constraining emissions are only that of CO and NO x . Polynomials to predict them with a high accuracy are established. The air preheating temperature has an effect on the natural gas consumption, but not on CO and NO x emissions. There is an optimal value for the aperture of the diaphragms, and this value is quantitatively established. If the concentration of VOCs in the air flow is high, CO and NO x emissions both decrease and a high rate of efficiency in VOC destruction is attained. This demonstrates that a pre-concentration of VOCs in the air flow prior to treatment by RI is recommended. (author)

An Investigation into factors influencing the choice of business ...

African Journals Online (AJOL)

There was significant difference between male and female career influencing factors. There was no significant difference regarding the influence exercised by parent in the students' choice of Business Education. There is significant difference between male and female in the influence exerted by external factors in their ...

Natural gas prices and the end of gradual change

International Nuclear Information System (INIS)

Osten, J.A.

1998-01-01

Natural gas price predictions for the years 1998, 1999-2001, 2000-2005 are provided. In general, prices are predicted to decrease with increase in storage. Some other factors that will influence the price of natural gas and, therefore, should receive consideration in price predictions, include growth in demand, natural gas production, deliverability, new pipelines, and the Alberta price basis. tabs., figs

Urban water consumption and its influencing factors in China

NARCIS (Netherlands)

Fan, Liangxin; Gai, Lingtong; Tong, Yan; Li, Ruihua

2017-01-01

Factors that affect water consumption should be identified to develop effective public policies. However, factors influencing domestic water consumption in cities in China, particularly on a national scale, are unclear. In this study, urban water consumption and its influencing factors in 286

Factors Influencing Pregnancy Desires among HIV Positive Women ...

African Journals Online (AJOL)

Factors Influencing Pregnancy Desires among HIV Positive Women in Sibande District in Mpumalanga, South Africa. ... Gender and Behaviour ... The objective of the study is to present findings on factors influencing pregnancy desires amongst HIV positive women that have participated in Prevention of Mother to child ...

Influencing factors of GaN growth uniformity through orthogonal test analysis

International Nuclear Information System (INIS)

Zhang, Zhi; Fang, Haisheng; Yan, Han; Jiang, Zhimin; Zheng, Jiang; Gan, Zhiyin

2015-01-01

Gallium nitride (GaN) is widely used in light-emitting diode (LED) devices due to its wide bandgap and excellently optoelectronic performance. The efficiency and lifetime of LEDs are critically determined by quality of GaN, for example, growth uniformity. Metal-organic chemical vapor deposition (MOCVD) is the most popular technique to grow high-quality GaN epitaxial layers. Growth uniformity is influenced by fluid flow, heat transfer and chemical reactions in the reactor. In this paper, the growth process in a close-coupled showerhead (CCS) MOCVD reactor is investigated based on 3D numerical simulation. Influences of the operating parameters on the growth uniformity are presented. To evaluate the role of the parameters systematically and efficiently on the growth uniformity, orthogonal test method is introduced. The results reveal that the growth rate and uniformity are strongly related to the total gas flow rate, the showerhead height and the inlet gas temperature, but are weakly affected by the isothermal wall temperature, the rotating speed and the susceptor temperature under the ranges of the current study. The optimized combination of the parameters is further proposed as a useful reference for obtaining the LED layers with a balance between the growth rate and the growth uniformity in industry. - Highlights: • Fluid flow, heat transfer, chemical reactions are calculated for a 3D CCS reactor. • The effects of process parameters on growth rate and uniformity are investigated. • Orthogonal test method is introduced to analyze the effect of multi-factors. • Optimal combinations can be obtained for the best growth rate and uniformity.

Social Factors Influencing Child Health in Ghana.

Directory of Open Access Journals (Sweden)

Emmanuel Quansah

Full Text Available Social factors have profound effects on health. Children are especially vulnerable to social influences, particularly in their early years. Adverse social exposures in childhood can lead to chronic disorders later in life. Here, we sought to identify and evaluate the impact of social factors on child health in Ghana. As Ghana is unlikely to achieve the Millennium Development Goals' target of reducing child mortality by two-thirds between 1990 and 2015, we deemed it necessary to identify social determinants that might have contributed to the non-realisation of this goal.ScienceDirect, PubMed, MEDLINE via EBSCO and Google Scholar were searched for published articles reporting on the influence of social factors on child health in Ghana. After screening the 98 articles identified, 34 of them that met our inclusion criteria were selected for qualitative review.Major social factors influencing child health in the country include maternal education, rural-urban disparities (place of residence, family income (wealth/poverty and high dependency (multiparousity. These factors are associated with child mortality, nutritional status of children, completion of immunisation programmes, health-seeking behaviour and hygiene practices.Several social factors influence child health outcomes in Ghana. Developing more effective responses to these social determinants would require sustainable efforts from all stakeholders including the Government, healthcare providers and families. We recommend the development of interventions that would support families through direct social support initiatives aimed at alleviating poverty and inequality, and indirect approaches targeted at eliminating the dependence of poor health outcomes on social factors. Importantly, the expansion of quality free education interventions to improve would-be-mother's health knowledge is emphasised.

Influence of gas law on ultrasonic behaviour of porous media under pressure.

Science.gov (United States)

Griffiths, S; Ayrault, C

2010-06-01

This paper deals with the influence of gas law on ultrasonic behaviour of porous media when the saturating fluid is high pressured. Previous works have demonstrated that ultrasonic transmission through a porous sample with variations of the static pressure (up to 18 bars) of the saturating fluid allows the characterization of high damping materials. In these studies, the perfect gas law was used to link static pressure and density, which is disputable for high pressures. This paper compares the effects of real and perfect gas laws on modeled transmission coefficient for porous foams at these pressures. Direct simulations and a mechanical parameters estimation from minimization show that results are very similar in both cases. The real gas law is thus not necessary to describe the acoustic behaviour of porous media at low ultrasonic frequencies (100 kHz) up to 20 bars. 2010 Elsevier B.V. All rights reserved.

Modeling Factors with Influence on Sustainable University Management

Directory of Open Access Journals (Sweden)

Oana Dumitrascu

2015-01-01

Full Text Available The main objective of this paper is to present the factors with influence on the sustainable university management and the relationships between them. In the scientific approach we begin from a graphical model, according to which the extracurricular activities together with internal environmental factors influence students’ involvement in such activities, the university attractiveness, their academic performance and their integration into the socially-economic and natural environment (components related with sustainable development. The model emphasizes that individual performances, related to students’ participation in extracurricular activities, have a positive influence on the sustainability of university management. The results of the study have shown that the university sustainability may be influenced by a number of factors, such as students’ performance, students’ involvement in extracurricular activities or university’s attractiveness and can in turn influence implicitly also the sustainability of university management. The originality of the paper consists in the relationships study using the modeling method in general and informatics tools of modeling in particular, as well as through graphical visualization of some influences, on the sustainability university management.

Geochemical and geologic factors effecting the formulation of gas hydrate: Task No. 5, Final report

Energy Technology Data Exchange (ETDEWEB)

Kvenvolden, K.A.; Claypool, G.E.

1988-01-01

The main objective of our work has been to determine the primary geochemical and geological factors controlling gas hydrate information and occurrence and particularly in the factors responsible for the generation and accumulation of methane in oceanic gas hydrates. In order to understand the interrelation of geochemical/geological factors controlling gas hydrate occurrence, we have undertaken a multicomponent program which has included (1) comparison of available information at sites where gas hydrates have been observed through drilling by the Deep Sea Drilling Project (DSDP) on the Blake Outer Ridge and Middle America Trench; (2) regional synthesis of information related to gas hydrate occurrences of the Middle America Trench; (3) development of a model for the occurrence of a massive gas hydrate as DSDP Site 570; (4) a global synthesis of gas hydrate occurrences; and (5) development of a predictive model for gas hydrate occurrence in oceanic sediment. The first three components of this program were treated as part of a 1985 Department of Energy Peer Review. The present report considers the last two components and presents information on the worldwide occurrence of gas hydrates with particular emphasis on the Circum-Pacific and Arctic basins. A model is developed to account for the occurrence of oceanic gas hydrates in which the source of the methane is from microbial processes. 101 refs., 17 figs., 6 tabs.

FACTORS INFLUENCING SECOND LANGUAGE ACQUISITION

Directory of Open Access Journals (Sweden)

Siti Khasinah

2014-05-01

Full Text Available Motivation, attitude, age, intelligence, aptitude, cognitive style, and personality are considered as factors that greatly influence someone in the process of his or her second language acquisition. Experts state that those factors give a more dominant contribution in SLA to learners variedly, depend on who the learners are, their age, how they behave toward the language, their cognitive ability, and also the way they learn.

Influence of organizational factors on safety

International Nuclear Information System (INIS)

Haber, S.B.; Metlay, D.S.; Crouch, D.A.

1990-01-01

There is a need for a better understanding of exactly how organizational management factors at a nuclear power plant (NPP) affect plant safety performance, either directly or indirectly, and how these factors might be observed, measured, and evaluated. The purpose of this research project is to respond to that need by developing a general methodology for characterizing these organizational and management factors, systematically collecting information on their status and integrating that information into various types of evaluative activities. Research to date has included the development of the Nuclear Organization and Management Analysis Concept (NOMAC) of a NPP, the identification of key organizational and management factors, and the identification of the methods for systematically measuring and analyzing the influence of these factors on performance. Most recently, two field studies, one at a fossil fuel plant and the other at a NPP, were conducted using the developed methodology. Results are presented from both studies highlighting the acceptability, practicality, and usefulness of the methods used to assess the influence of various organizational and management factors including culture, communication, decision-making, standardization, and oversight. 6 refs., 3 figs., 1 tab

INFLUENCE FACTORS FOR LEASING MARKET CONTRACTS

Directory of Open Access Journals (Sweden)

Oana BĂRBULESCU

2016-11-01

Full Text Available This paper aims to investigate the relationship between leasing contracts and some factors that influence the value of these contracts. In order to do this, we have decided on some quantitative marketing research by appealing to statistics for accomplishing the objectives that we have set: to find a correlation between the turnover percentage assigned to leasing expenses and several influence factors. This study indicated that the more contracts are signed by a firm, the more likely is to assign a bigger fraction of the income to each new leasing contract. The study confirmed that bigger companies are relying more on leasing as a way of financing than small companies. This study also discovered that companies with more employees are using larger contracts in order to sustain their activity. The findings are expected to contribute to adjusting the offers by the leasing companies, taking into consideration these factors and to using these factors in order to better predict the market evolution.

Problem of Production of Shale Gas in Germany

OpenAIRE

Nataliya K. Meden

2014-01-01

A bstract: Our magazine publishes a series of articles on shale gas in different countries. This article is about Germany, a main importer of Russian natural gas, so a perspective of exploitation of local shale gas resources is of a clear practical importance for Russia. We discuss external and internal factors which determine position of the German government concerning the shale gas excavation: policy of the USA and the EU, positions of German political parties, influence of the lobbying co...

Factors that negatively influence consumption of traditionally ...

African Journals Online (AJOL)

Factors that negatively influence consumption of traditionally fermented milk ... in various countries of sub-Saharan Africa and a number of health benefits to human ... influence consumption of Mursik, a traditionally fermented milk product from ...

Addition of malodorants to lighter gas

DEFF Research Database (Denmark)

Neela, Vasu; von Solms, Nicolas

2014-01-01

Relevant thermodynamic and phase behavior of mixtures created by adding malodorants to lighter gas to discourage its abuse have been studied. The influence of physical factors such as temperature, pressure and concentration of the selected substances with lighter gas is studied. This work represe......-Plus-Association (CPA) - an equation of state - to model the fluid phase and solubility behavior of the mixtures formed by the various additives with butane....

Factors Influencing Organization Adoption Decision On Cloud Computing

OpenAIRE

Ailar Rahimli

2013-01-01

Cloud computing is a developing field, using by organization that require to computing resource to provide the organizational computing needs. The goal of this research is evaluate the factors that influence on organization decision to adopt the cloud computing in Malaysia. Factors that relate to cloud computing adoption that include : need for cloud computing, cost effectiveness, security effectiveness of cloud computing and reliability. This paper evaluated the factors that influence on ado...

Rotordynamic analysis for stepped-labyrinth gas seals using moody's friction-factor model

International Nuclear Information System (INIS)

Ha, Tae Woong

2001-01-01

The governing equations are derived for the analysis of a stepped labyrinth gas seal generally used in high performance compressors, gas turbines, and steam turbines. The bulk-flow is assumed for a single cavity control volume set up in a stepped labyrinth cavity and the flow is assumed to be completely turbulent in the circumferential direction. The Moody's wall-friction-factor model is used for the calculation of wall shear stresses in the single cavity control volume. For the reaction force developed by the stepped labyrinth gas seal, linearized zeroth-order and first-order perturbation equations are developed for small motion about a centered position. Integration of the resultant first-order pressure distribution along and around the seal defines the rotordynamic coefficients of the stepped labyrinth gas seal. The resulting leakage and rotordynamic characteristics of the stepped labyrinth gas seal are presented and compared with Scharrer's theoretical analysis using Blasius' wall-friction-factor model. The present analysis shows a good qualitative agreement of leakage characteristics with Scharrer's analysis, but underpredicts by about 20 %. For the rotordynamic coefficients, the present analysis generally yields smaller predicted values compared with Scharrer's analysis

A Comparison of Factors that Influence the Lyophilization Process

OpenAIRE

Mnerie, Dumitru; Anghel, Gabriela Victoria; Mnerie, Alin Vasile; Cheveresan, Constantin

2007-01-01

The lyophilization (or freeze drying) process for agro-foods products depends on a series of technological factors that are in an inter-dependence with the process performance. This paper presents an expert method and its application. This method characterizes the influence factors of the lyophilization process, after the importance level of some factors in correlation with other factors, is defined. Only the most important factors were considered; influence considerations were made in relati...

Canadian natural gas price forecast

International Nuclear Information System (INIS)

Jones, D.

1998-01-01

The basic factors that influenced NYMEX gas prices during the winter of 1997/1998 - warm temperatures, low fuel prices, new production in the Gulf of Mexico, and the fact that forecasters had predicted a mild spring due to El Nino - were reviewed. However, it was noted that for the last 18 months the basic factors had less of an impact on market direction because of an increase in Fund and technical trader participation. Overall, gas prices were strong through most of the year. For the winter of 1998-1999 the prediction was that NYMEX gas prices will remain below $2.00 through to the end of October 1998 because of high U.S. storage levels and moderate temperatures. NYMEX gas prices are expected to peak in January 1999 at $3.25. AECO natural gas prices were predicted to decrease in the short term because of increasing levels of Canadian storage, and because of delays in Northern Border pipeline expansions. It was also predicted that AECO prices will peak in January 1999 and will remain relatively strong through the summer of 1999. tabs., figs

Influence of shielding gas on fume formation rate and particle size distribution for optimised GMAW

International Nuclear Information System (INIS)

Carpenter, K.R.; Monaghan, B.J.; Nicholson, A.; Cuiuri, D.; Norrish, J.

2010-01-01

The influence of shielding gas on fume formation rate (FFR) and particle size distribution has been investigated by using a technique developed for automatic control of the welding voltage in gas metal arc welding (GMAW). The results for automatic control are compared with the use of a fixed voltage. Significant reductions in FFR and a general decrease in average particle size were observed using the automatic control technique. This reduction in FFR was attributed to improved metal transfer stability, via a reduction in the occurrence of repelled globular transfer, by promoting the 'drop-spray' transfer condition, together with a reduction in the arc length. FFR and particle size were strongly related to the C O2 content of the shielding gas, where FFR increased as percent C 02 increased, due mainly to the dominant influence of C O2 on weld transfer and arc characteristics. The results indicate that FFR for GMAW in the spray regime should be determined by using optimised welding conditions for each shielding gas composition.

Factors influencing e-commerce development in Serbia

OpenAIRE

Kalinić, Zoran; Ranković, Vladimir; Kalinić, Ljubina

2016-01-01

In this paper, an overview of current state of e-commerce development in Serbia is presented. Also, some important factors influencing e-commerce diffusion are discussed. The factors are divided into four groups: technical factors, which cover e- commerce telecommunication and logistics infrastructure; legal factors, i.e. necessary laws and regulations on e-commerce; economic factors, and psychological factors and local culture. The study showed very strong correlation between broadband inter...

Factors that influence beverage choices at meal times

DEFF Research Database (Denmark)

Mueller Loose, Simone; Jaeger, S. R.

2012-01-01

Beverages are consumed at almost every meal occasion, but knowledge about the factors that influence beverage choice is less than for food choice. The aim of this research was to characterize and quantify factors that influence beverage choices at meal times. Insights into what beverages are chosen...... consumers. Participants (n=164) described 8356 meal occasions in terms of foods and beverages consumed, and the contextual characteristics of the occasion. Beverage choice was explored with random-parameter logit regressions to reveal influences linked to food items eaten, context factors and person factors....... Thereby this study contributed to the food choice kaleidoscope research approach by expressing the degree of context dependency in form of odds ratios and according significance levels. The exploration of co-occurrence of beverages with food items suggests that beverage-meal item combinations can be meal...

Intrinsic and extrinsic factors influencing large African herbivore movements

NARCIS (Netherlands)

Venter, J.A.; Prins, H.H.T.; Mashanova, A.; Boer, de W.F.; Slotow, R.

2015-01-01

Understanding environmental as well as anthropogenic factors that influence large herbivore ecological patterns and processes should underpin their conservation and management. We assessed the influence of intrinsic, extrinsic environmental and extrinsic anthropogenic factors on movement behaviour

Factors influencing the development of routes for regular oil transport from Dikson

Energy Technology Data Exchange (ETDEWEB)

Riska, K. [ILS Ltd., Helsinki (Finland); Breivik, K.; Eide, I.S.; Gudmestad, O.; Hilden, T. [Statoil ASA, Stavanger (Norway)

2006-11-15

Many oil and gas companies have increased their exploration efforts in the Arctic where a considerable part of the world's remaining oil and gas resources are located. Several large fields have been discovered in areas far from markets. This paper described the challenge of finding methods for efficient, reliable and economic transport to markets. Traditionally, shipping operations in Arctic waters has taken place by using icebreakers. However, large scale development of oil and gas fields in the Arctic will require large tankers that are designed for operation under severe Arctic conditions. For that reason, Statoil initiated a program in 2005 to study the operation of large tankers in ice infested waters and under Arctic conditions. The primary objective was to demonstrate that large vessels could operate in ice infested waters and to study the effect of using vessels with large beams. Factors influencing the design of the vessels used for reliable year-round oil transportation by ships from the north-western Russian Arctic areas were investigated with special attention to one icebreaker escorting tanker with wider beam than that of the icebreaker; passage through pressurized ice fields; and, passage through ridge fields. The design of the whole transport system was described in this paper along with an investigation of the physics of the above factors. An ice model tank at the Helsinki University of Technology was used to carry out the tests for oil transport from a possible terminal in the vicinity of the port of Dikson to Murmansk. Three types of winter/ice conditions were analyzed, notably mild, average and severe. For each of these conditions, the parameters of the ice cover were determined along the whole route. The average transport speed was determined based on the ice conditions and ship characteristics for the whole route from Dikson to Murmansk and return. 2 refs., 14 figs.

Influence of Gas-Liquid Interface on Temperature Wave of Pulsating Heat Pipe

Directory of Open Access Journals (Sweden)

Ying Zhang

2018-01-01

Full Text Available The influence of the interface on the amplitude and phase of the temperature wave and the relationship between the attenuation of the temperature wave and the gas-liquid two-phase physical parameters are studied during the operation of the pulsating heat pipe. The numerical simulation shows that the existence of the phase interface changes the direction of the temperature gradient during the propagation of the temperature wave, which increases the additional “thermal resistance.” The relative size of the gas-liquid two-phase thermal conductivity affects the propagation direction of heat flow at phase interface directly. The blockage of the gas plug causes hysteresis in the phase of the temperature wave, the relative size of the gas-liquid two-phase temperature coefficient will gradually increase the phase of the temperature wave, and the time when the heat flow reaches the peak value is also advanced. The attenuation of the temperature wave is almost irrelevant to the absolute value of the density, heat capacity, and thermal conductivity of the gas-liquid two phases, and the ratio of the thermal conductivity of the gas-liquid two phases is related. When the temperature of the heat pipe was changed, the difference of heat storage ability between gas and liquid will lead to the phenomenon of heat reflux and becomes more pronounced with the increases of the temperature wave.

Influence of electrode, buffer gas and control gear on metal halide lamp performance

International Nuclear Information System (INIS)

Lamouri, A; Naruka, A; Sulcs, J; Varanasi, C V; Brumleve, T R

2005-01-01

In this paper the influence of electrode composition, buffer gas fill pressure and control gear on the performance of metal halide lamps is investigated. It is shown that pure tungsten electrodes improve lumen maintenance and reduce voltage rise over lamp life. An optimum buffer gas fill pressure condition is discovered which allows for reduced electrode erosion during lamp starting as well as under normal operating conditions. Use of electronic control gear is shown to improve the performance of metal halide lamps

Defect formation in fluoropolymer films at their condensation from a gas phase

Science.gov (United States)

Luchnikov, P. A.

2018-01-01

The questions of radiation defects, factors of influence of electronic high-frequency discharge plasma components on the molecular structure and properties of the fluoropolymer vacuum films synthesized on a substrate from a gas phase are considered. It is established that at sedimentation of fluoropolymer coverings from a gas phase in high-frequency discharge plasma in films there are radiation defects in molecular and supramolecular structure because of the influence of active plasma components which significantly influence their main properties.

The non conventional gas, a factor of energy independence?

International Nuclear Information System (INIS)

Jacques Percebois

2011-01-01

As the recent exploitation of non conventional gases (or shale gases) has dramatically changed the energy deal in the USA, and therefore the energy world market, these gases seem to be a factor of energy independence for countries which possess such resources, but also create environmental constrains. The author describes how shale gas produces a technological revolution, and discusses how it can be a factor for the diversification of the energy mix, and above all a way to reconquer some energy independence

Factors influencing workplace health promotion intervention: a qualitative systematic review.

Science.gov (United States)

Rojatz, Daniela; Merchant, Almas; Nitsch, Martina

2017-10-01

Although workplace health promotion (WHP) has evolved over the last 40 years, systematically collected knowledge on factors influencing the functioning of WHP is scarce. Therefore, a qualitative systematic literature review was carried out to systematically identify and synthesize factors influencing the phases of WHP interventions: needs assessment, planning, implementation and evaluation. Research evidence was identified by searching electronic databases (Scopus, PubMed, Social Sciences Citation Index, ASSIA, ERIC, IBBS and PsycINFO) from 1998 to 2013, as well as by cross-checking reference lists of included peer-reviewed articles. The inclusion criteria were: original empirical research, description of WHP, description of barriers to and/or facilitators of the planning, implementation and/or evaluation of WHP. Finally, 54 full texts were included. From these, influencing factors were extracted and summarized using thematic analysis. The majority of influencing factors referred to the implementation phase, few dealt with planning and/or evaluation and none with needs assessment. The influencing factors were condensed into topics with respect to factors at contextual level (e.g. economic crisis); factors at organizational level (e.g. management support); factors at intervention level (e.g. quality of intervention concept); factors at implementer level (e.g. resources); factors at participant level (e.g. commitment to intervention) and factors referring to methodological and data aspects (e.g. data-collection issues). Factors regarding contextual issues and organizational aspects were identified across three phases. Therefore, future research and practice should consider not only the influencing factors at different levels, but also at different phases of WHP interventions. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

An analysis of the factors that influence the level and scaling of mammalian BMR.

Science.gov (United States)

McNab, Brian Keith

2008-09-01

The factors influencing the basal rate of metabolism (BMR) in 639 species of mammals include body mass, food habits, climate, habitat, substrate, a restriction to islands or highlands, use of torpor, and type of reproduction. They collectively account for 98.8% of the variation in mammalian BMR, but often interact in complex ways. The factor with the greatest impact on BMR, as always, is body mass (accounting for 96.8% of its variation), the extent of its impact reflecting the 10(6.17)-fold range of mass in measured species. The attempt to derive mathematically the power relationship of BMR in mammals is complicated by the necessity to include all of the factors that influence BMR that are themselves correlated with body mass. BMR also correlates with taxonomic affiliation because many taxa are distinguished by their ecological and behavioral characteristics. Phylogeny, reflecting previous commitments, may influence BMR either through a restriction on the realized range of behaviors or by opening new behavioral and ecological opportunities. A new opportunity resulted from the evolution by eutherians of a type of reproduction that permitted species feeding on high quality resources to have high BMRs. These rates facilitated high rates of gas, nutrient, and waste exchange between a pregnant eutherian and her placental offspring. This pattern led to high rates of reproduction in some eutherians, a response denied all monotremes and marsupials, thereby permitting eutherians to occupy cold-temperate and polar environments and to dominate other mammals in all environments to which ecologically equivalent eutherians had access.

Ranking Canadian oil and gas projects using TOPSIS

Directory of Open Access Journals (Sweden)

Seyed Jafar Sadjadi

2017-08-01

Full Text Available One of the primary concerns for investment in oil and gas projects is to have a comprehensive understanding on different issues associated with this industry. The industry is mainly influ-enced by the price of oil and gas and in some events, many production units have been forced to shut down solely because of low price of oil and gas. Environmental issues are other important factors, which may put pressure on Canada’s political affairs since the country has strong com-mitment to reduce green gas effect. In this paper, we introduce a multi-criteria decision making method, which helps us rank different projects in terms of investment. The proposed study con-siders different investment factors including net present value, rate of return, benefit-cost analy-sis and payback period along with the intensity of green gas effects for ranking the present oil and gas projects in Canada.

Hydro-pneumatic accumulators for vehicles kinetic energy storage: Influence of gas compressibility and thermal losses on storage capability

International Nuclear Information System (INIS)

Puddu, Pierpaolo; Paderi, Maurizio

2013-01-01

In this work the differences between the thermodynamic behaviour of real and ideal gases are analysed to determine their influence on the processes of compression and expansion of a gas-charged accumulator. The behaviour of real gas has a significant influence on the size of accumulators used for Kinetic Energy Recovery of vehicles. In particular, it is underscored that the accumulator's design, based on ideal gas behaviour, provides undersized accumulators and therefore makes impossible the complete energy recovery for Hydraulic Energy Storage Systems (HES). The analysis of the thermodynamic properties of gases has shown that the main differences between ideal and real behaviour are due to gas compressibility. A mathematical model of a gas-charged accumulator is developed in order to analyse its real behaviour in presence of irreversible heat transfer and viscous losses. The simulation process of charging and discharging of a hydro-pneumatic accumulator, makes it clear that hydrodynamic and thermal losses are responsible for the characteristic hysteresis cycle on the p–V diagram. Different gases are tested as charged fluid of a hydro-pneumatic accumulator to simulate cyclic processes of charge and discharge. Results show different characteristics in terms of volumetric gas properties, thermal time-constant and thermal efficiency of the accumulator. - Highlights: • A dynamic model of a gas charged accumulator was developed. • Gas compressibility significantly influences the size of high-pressure accumulators. • A hysteresis loop is indicative of the thermal energy losses. • Loss increases with increasing the period of the cyclic process. • Thermal time constant is different from compression to expansion

Factors influencing bone scan quality

International Nuclear Information System (INIS)

Adams, F.G.; Shirley, A.W.

1983-01-01

A reliable subjective method of assessing bone scan quality is described. A large number of variables which theoretically could influence scan quality were submitted to regression and factor analysis. Obesity, age, sex and abnormality of scan were found to be significant but weak variables. (orig.)

Influence of leakage flow on the behaviour of gas behind a blockage in LMFBR subassembly geometry

International Nuclear Information System (INIS)

Fukuzawa, Y.

1980-07-01

Observations were made of the behaviour of gas behind a uniform porous 21% corner blockage within a pin-bundle of LMFBR subassembly geometry. The main parameter of the experiment was the leakage flow rate through the blockage. The behaviour of gas is significantly influenced by the leakage flow rate. The measured size and residence time of a gas cavity formed behind the blockage are shown and the mechanisms of the gas cavity dispersion by the leakage flow discussed by using a simple model of the liquid flow distribution behind the blockage. (orig.) [de

Factors influencing consumer behaviour in market vegetables in Yemen

Directory of Open Access Journals (Sweden)

Tarish H. Al-Gahaifi

2011-01-01

Full Text Available The purpose of the research is to understand factors influencing consumer behaviour when buying vegetables in Republic of Yemen. Data collection was done by structured questionnaire administered through schools, universities, government offices, and markets from 13 provinces in 5 governorates. Random convenience sampling technique was used. Total sample comprised of 463 completed questionnaires which were used for analysis. The respondents were classified into five categories on the base of their monthly income, age, education, gender, and type of settlement. Authors present the factors that can influence significantly this behaviour, e.g. price, quality, the location of seller, habit, personal relationship between consumer and seller, occasions, discount, sorting, word-mouth, time of purchase, the way of products display, and recommendation of friends and families. From the obtained results, it is obvious that there was high influence on the behaviour of Yemeni consumer when buying vegetables for factors price, occasions, discontent, and time of purchase, while factors habit, display, sorting, and the location of seller suggests medium influence, and the influence was low for word-mouth.

What factors influence British medical students' career intentions?

Science.gov (United States)

Ibrahim, Michael; Fanshawe, Angela; Patel, Vanash; Goswami, Karan; Chilvers, Geoffrey; Ting, Michelle; Pilavakis, Yiannis; Rao, Christopher; Athanasiou, Thanos

2014-12-01

The aim of this study was to identify factors that influence career choice in UK medical students. Students at seven institutions were invited to rate how important various factors were on influencing their career choices and how interested they were in pursuing different specialties. The influence of interpersonal relationship networks on career choice was also evaluated. 641 responses were collected. 44% (283) were male, 16% (105) were graduates and 41% (263) were final-year students. For Dermatology (p = 0.009), Paediatrics (p = 0.000), Radiology (p = 0.000), Emergency Medicine (p = 0.018) and Cardiothoracic Surgery (p = 0.000), there was a clear correlation between completing a clinical attachment and an interest in pursuing the specialty. Perceived characteristics of the speciality, individually and in clusters were considered important by specific subgroups of students, such as those interested in surgery. These students considered prestige (p = 0.0003), role models (p = 0.014), financial rewards after training (p = 0.0196) and technical challenge (p = 0.0011) as important factors. Demographics such as sex and age played a significant role in career choice. Interpersonal relationship networks do not have a significant influence on career intentions. This study shows that the career intentions of British medical students are influenced by their undergraduate experience and by the weight they place on different specialty-related factors.

Influence of ionization on ultrafast gas-based nonlinear fiber optics.

Science.gov (United States)

Chang, W; Nazarkin, A; Travers, J C; Nold, J; Hölzer, P; Joly, N Y; Russell, P St J

2011-10-10

We numerically investigate the effect of ionization on ultrashort high-energy pulses propagating in gas-filled kagomé-lattice hollow-core photonic crystal fibers by solving an established uni-directional field equation. We consider the dynamics of two distinct regimes: ionization induced blue-shift and resonant dispersive wave emission in the deep-UV. We illustrate how the system evolves between these regimes and the changing influence of ionization. Finally, we consider the effect of higher ionization stages.

The Influence of Several Doped Ions on Gas Sensitivity of Hematite

Institute of Scientific and Technical Information of China (English)

无

1999-01-01

The dehydrating activation energies of the hematite with several doped ions used for the alcohol sensor were determinated by thermogravimetric differential thermal analyzer (TG-DTA) and the grain size of the samples were observed with TEM. The hematites with different doping amounts of Sn4 + were investigated by Mossbauer spectrometer. It shows that the different doped ion is of influence for grain growth of the hematite. The decrease of grain size stemmed from the doped ion causes gas sensitivity for alcohol to increase and the dehydrating activation energy to decrease correspondingly. When the different amounts of Sn4 + is doped in hematite, the microstructure of the hematite can be influenced.

Factors negatively influencing knowledge sharing in software development

Directory of Open Access Journals (Sweden)

Lucas T. Khoza

2017-07-01

Objective: This study seeks to identify factors that negatively influence knowledge sharing in software development in the developing country context. Method: Expert sampling as a subcategory of purposive sampling was employed to extract information, views and opinions from experts in the field of information and communication technology, more specifically from those who are involved in software development projects. Four Johannesburg-based software developing organisations listed on the Johannesburg Stock Exchange (JSE, South Africa, participated in this research study. Quantitative data were collected using an online questionnaire with closed-ended questions. Results: Findings of this research reveal that job security, motivation, time constraints, physiological factors, communication, resistance to change and rewards are core factors negatively influencing knowledge sharing in software developing organisations. Conclusions: Improved understanding of factors negatively influencing knowledge sharing is expected to assist software developing organisations in closing the gap for software development projects failing to meet the triple constraint of time, cost and scope.

The Influence of psychological-sociological factors on self-employment

OpenAIRE

Remeikienė, Rita; Startienė, Gražina; Vasauskaitė, Jovita

2011-01-01

The article deals with the influence of psychological-sociological factors on a self-employed person, which is little explored in business literature. Analysis of scientific literature revealed that the psychological-sociological factors of self-employment can be divided into groups based on certain personal characteristics and individual psychological states, and the influence of psychological-sociological factors of self-employment is threefold: positive, negative, and unclear (both positiv...

A survey on critical factors influencing organizational commitment

Directory of Open Access Journals (Sweden)

Hamidreza Kheirkhah

2014-04-01

Full Text Available Organizational commitment is an important issue and organization attitude has become an area of study among many researchers in the fields of organizational behavior. In fact, there are many studies on human resource management where the effects of organizational commitment on other issues have been investigated and the purpose of this research is to find critical factors influencing on organizational commitment. Based on an exploration of the literature review and interviews, the proposed study of this paper extracts 24 variables and using factor analysis, we select the most important factors, which are grouped in four categories. The implementation of our factor analysis has revealed Affective commitment, Continuous commitment, Moral commitment and Enduring commitment are the most important factors influencing organizational commitment.

Hierarchical and coupling model of factors influencing vessel traffic flow.

Science.gov (United States)

Liu, Zhao; Liu, Jingxian; Li, Huanhuan; Li, Zongzhi; Tan, Zhirong; Liu, Ryan Wen; Liu, Yi

2017-01-01

Understanding the characteristics of vessel traffic flow is crucial in maintaining navigation safety, efficiency, and overall waterway transportation management. Factors influencing vessel traffic flow possess diverse features such as hierarchy, uncertainty, nonlinearity, complexity, and interdependency. To reveal the impact mechanism of the factors influencing vessel traffic flow, a hierarchical model and a coupling model are proposed in this study based on the interpretative structural modeling method. The hierarchical model explains the hierarchies and relationships of the factors using a graph. The coupling model provides a quantitative method that explores interaction effects of factors using a coupling coefficient. The coupling coefficient is obtained by determining the quantitative indicators of the factors and their weights. Thereafter, the data obtained from Port of Tianjin is used to verify the proposed coupling model. The results show that the hierarchical model of the factors influencing vessel traffic flow can explain the level, structure, and interaction effect of the factors; the coupling model is efficient in analyzing factors influencing traffic volumes. The proposed method can be used for analyzing increases in vessel traffic flow in waterway transportation system.

‘Gas Syndrome’ - A Culture Bound Syndrome

Directory of Open Access Journals (Sweden)

Anil Kakunje

2014-02-01

Full Text Available Culture refers to the shared patterns of feelings, beliefs and behaviour that reflect in the way of living in a society. Culture uniquely influence the role functioning or psychosoical wellbeing of people living in a given society by exerting influence on their mind by their traditional health beliefs. Cultural factors influence understanding, presentation, diagnosis, management, course and outcome of many diseases, especially psychiatric disorders. Culture-bound syndromes seem to be episodic, dramatic and discrete patterns of behavioral reactions specific to a particular community that articulate both personal predicament and public concerns. Every culture provides explanations and causal attributions for somatic symptoms. One of the common complaints of persons coming to medical attention is ‘Gas’ or similar terminologies like ‘vayu’ etc. People attribute varied symptoms from abdominal discomfort, chest pain, headache, joint pains, back pain, somatic complaints to ‘Gas’. ‘Gas’ is reported to be the cause for the distress and the primary duty of the treating clinician is to relieve them of the gas. The problem of troubling Gas or vayu has been influencing Indian culture/tradition since ancient days. We do see a significant proportion of patients visiting varied specialists attributing all their problems to Gas. 'Gas Syndrome’ is proposed as a culture bound syndrome.

Emission Characteristics of Gas-Fired Boilers based on Category-Specific Emission Factor from Field Measurements in Beijing, China

Science.gov (United States)

Itahashi, S.; Yan, X.; Song, G.; Yan, J.; Xue, Y.

2017-12-01

Gas-fired boilers will become the main stationary sources of NOx in Beijing. However, the knowledge of gas-fired boilers in Beijing is limited. In the present study, the emission characteristics of NOx, SO2, and CO from gas-fired boilers in Beijing were established using category-specific emission factors (EFs) from field measurements. In order to obtain category-specific EFs, boilers were classified through influence analysis. Factors such as combustion mode, boiler type, and installed capacity were considered critical for establishing EFs because they play significant roles in pollutant formation. The EFs for NOx, CO, and SO2 ranged from 1.42-6.86 g m-3, 0.05-0.67 g m-3 and 0.03-0.48 g m-3. The emissions of NOx, SO2, and CO for gas-fired boilers in Beijing were 11121 t, 468 t, and 222 t in 2014, respectively. The emissions were spatially allocated into grid cells with a resolution of 1 km × 1 km, and the results indicated that top emitters were in central Beijing. The uncertainties were quantified using a Monte Carlo simulation. The results indicated high uncertainties in CO (-157% to 154%) and SO2 (-127% to 182%) emissions, and relatively low uncertainties (-34% to 34%) in NOx emission. Furthermore, approximately 61.2% and 96.8% of the monitored chamber combustion boilers (CCBs) met the standard limits for NOx and SO2, respectively. Concerning NOx, low-NOx burners and NOx emission control measures are urgently needed for implementing of stricter standards. Adopting terminal control measures is unnecessary for SO2, although its concentration occasionally exceeds standard limits, because reduction of its concentration can be achieved thorough control of the sulfur content of natural gas at a stable low level. Furthermore, the atmospheric combustion boilers (ACBs) should be substituted with CCBs, because ACBs have a higher emission despite lower gross installed capacity. The results of this study will enable in understanding and controlling emissions from gas

Evaluating the influence of increasing block tariffs in residential gas sector using agent-based computational economics

International Nuclear Information System (INIS)

Gong, Chengzhu; Yu, Shiwei; Zhu, Kejun; Hailu, Atakelty

2016-01-01

Designing a desirable increasing block tariff for the residential gas retail market has been a challenging task for regulated utilities, especially in China. To deal with such problems, in this paper, we establish an agent-based, computational economics system to provide a formal evaluation of the direct and indirect influences of several issued increasing block tariffs in the residential gas market. Moreover, a comprehensive demand response behaviour model has been improved in term of price elasticity, while still coping with income levels and complex social environment. We also compute and compare the outcomes of several increasing block tariffs with the initial flat tariff by running the system on a test-case using real-world data from a middle-scale gas retail market in Wuhan. The results indicate that there is an appropriate increasing block gas tariff scheme that has greater ability to improve social equity while still ensuring operator revenue and promoting gas conservation. In order to offset the limitations of the proposed increasing block tariffs, the regulator should adopt some complementary measures, such as applying appropriate policies targeting the intended consumers, and allowing large families to obtain extra allowance of volume. - Highlights: •Analyse the influence of increasing block tariffs in residential gas sector. •An agent-based computational economics system is utilised for policy analysis. •Increasing block tariff can generate revenue while still promote gas conservation. •The increasing subsidy for low income household can improve the social equity.

Variation in excess oxidant factor in combustion products of MHD generator. [Natural gas fuel

Energy Technology Data Exchange (ETDEWEB)

Pinkhasik, M S; Mironov, V D; Zakharko, Yu A; Plavinskii, A I

1977-12-01

Methods and difficulties associated with determining the excess oxidant factor for natural gas-fired MHD generators are discussed. The measurement of this factor is noted to be essential for the optimization of the combustion chamber and operation of MHD generators. A gas analyzer of electrochemical type is considered as a quick - response sensor capable of analyzing the composition of the combustion products and thus determining accurately the excess oxidant factor. The principle of operation of this sensor is discussed and the dependence of the electrochemical sensor emf on excess oxidant factor is shown. Three types of sensors are illustrated and tables of test results are provided.

[Factors influencing nurses' organizational citizenship behavior].

Science.gov (United States)

Park, Junhee; Yun, Eunkyung; Han, Sangsook

2009-08-01

This study was conducted to identify the factors that influence nurses' organizational citizenship behavior. A cross-sectional design was used, with a convenience sample of 547 nurses from four university hospitals in Seoul and Gyeonggi province. The data were collected through a questionnaire survey done from September 22 to October 10, 2008. The tools used for this study were scales on organizational citizenship behavior (14 items), self-leadership (14 items), empowerment (10 items), organizational commitment (7 items), job satisfaction (8 items) and transformational.transactional leadership (14 items). Cronbach's alpha and factor analysis were examined to test reliability and construct validity of the scale. The data collected were processed using SPSS Window 15.0 Program for actual numbers and percentages, differences in the dependent variable according to general characteristics, and means, standard deviations, correlation coefficients and multiple regression analysis. The factors influencing nurses' organizational citizenship behavior were identified as self-leadership(beta=.247), empowerment (beta=.233), job satisfaction (beta=.209), organizational commitment (beta=.158), and transactional leadership (beta=.142). Five factors explained 42.0% of nurses' organizational citizenship behavior. The results of this study can be used to develop further management strategies for enhancement of nurses' organizational citizenship behavior.

Factors Influencing Title VII Bilingual Program Institutionalization.

Science.gov (United States)

Lewis, Gerald R.; And Others

1985-01-01

This study of the primary restraining and driving forces that influence Title VII bilingual education programs found the external environment, the local community, to be the main factor influencing institutionalization and self-renewal. The internal environment--the local school, and the local school's organization or central office, school board,…

A factor analysis to detect factors influencing building national brand

Directory of Open Access Journals (Sweden)

Naser Azad

Full Text Available Developing a national brand is one of the most important issues for development of a brand. In this study, we present factor analysis to detect the most important factors in building a national brand. The proposed study uses factor analysis to extract the most influencing factors and the sample size has been chosen from two major auto makers in Iran called Iran Khodro and Saipa. The questionnaire was designed in Likert scale and distributed among 235 experts. Cronbach alpha is calculated as 84%, which is well above the minimum desirable limit of 0.70. The implementation of factor analysis provides six factors including “cultural image of customers”, “exciting characteristics”, “competitive pricing strategies”, “perception image” and “previous perceptions”.

Factors Influencing Prevention and Control of Malaria among ...

African Journals Online (AJOL)

AJRH Managing Editor

investigate factors that influence malaria prevention and control practices among pregnant ... treatment of clinical cases and the promotion of ... influence their decision regarding malaria ..... have the ability to purchase anti-malaria drugs that.

Learning Data Set Influence on Identification Accuracy of Gas Turbine Neural Network Model

Science.gov (United States)

Kuznetsov, A. V.; Makaryants, G. M.

2018-01-01

There are many gas turbine engine identification researches via dynamic neural network models. It should minimize errors between model and real object during identification process. Questions about training data set processing of neural networks are usually missed. This article presents a study about influence of data set type on gas turbine neural network model accuracy. The identification object is thermodynamic model of micro gas turbine engine. The thermodynamic model input signal is the fuel consumption and output signal is the engine rotor rotation frequency. Four types input signals was used for creating training and testing data sets of dynamic neural network models - step, fast, slow and mixed. Four dynamic neural networks were created based on these types of training data sets. Each neural network was tested via four types test data sets. In the result 16 transition processes from four neural networks and four test data sets from analogous solving results of thermodynamic model were compared. The errors comparison was made between all neural network errors in each test data set. In the comparison result it was shown error value ranges of each test data set. It is shown that error values ranges is small therefore the influence of data set types on identification accuracy is low.

Framing scenarios of electricity generation and gas use: EPRI report series on gas demands for power generation. Final report

International Nuclear Information System (INIS)

Thumb, S.; Glover, W.; Hughes, W.R.

1996-07-01

Results of three EPRI projects have been combined to analyze power industry consumption of gas and other generating fuels. The report's capstone is a scenario analysis of power industry generation and fuel consumption. The Utility Fuel Consumption Model (UFCM), developed for the project, predicts generating capacity and generation by region and fuel through 2015, based on load duration curves, generation dispatch, and expected capacity additions. Scenarios embody uncertain factors, such as electricity demand growth, fuel switching, coal-gas competition, the merit order of gas-coal dispatch, and retirement of nuclear units, that substantially affect gas consumption. Some factors, especially electricity demand have very large effects. The report includes a consistent database on NUG (non-utility generation) capacity and generation and assesses historical and prospective trends in NUG generation. The report shows that NUG capacity growth will soon decline substantially. The study assesses industry capability for price-induced fuel switching from gas to oil and coal, documenting conversions of coal units to dual coal-gas capability and determining that gas-to-oil switching remains a strong influence on fuel availability and gas prices, though regulation and taxation have increased trigger prices for switching. 61 tabs

Influence of fuel composition on the non-oxidizing heating of steel in a waste gas atmosphere

Energy Technology Data Exchange (ETDEWEB)

Minkler, W [LOI Industrieofenanlagen G.m.b.H., Essen (Germany, F.R.)

1979-04-01

On the basis of a number of graphs and data on theoretical combustion temperatures and the difference between the heating value of the fuel and the waste gas in respect of 1 m/sup 3/ of waste gas, the author demonstrates the influence of fuel composition on the non-oxidizing heating of steel in a waste gas atmosphere derived from five different fuels. A rotary-hearth furnace is described for the non-oxidizing heating of pressings from plain carbon and alloy steel.

Yukon's common oil and gas regime

International Nuclear Information System (INIS)

Love, B.

1998-01-01

The Yukon's common oil and gas regime was developed in partnership with First Nations and it sets out the rules that will apply throughout the Yukon and on Yukon and First Nation lands. While separate and distinct, it conforms with and is compatible with other government systems and regimes. The major elements of the common regime include the Oil and Gas Act, regulations, policies, processes and agreements. The specific opportunities that are available in each phase of oil and gas development in the Yukon are described, with a map showing all basins, reserves and sites of current oil and gas activity. The Yukon has eight potential oil and gas basins: North Coast, Old Crow, Kandik, Eagle Plain, Peel Plateau, Bonnet Plume, Whitehorse Trough, and Liard Plateau. Only three of the eight, the Liard Plateau, Whitehorse Trough and Eagle Plain, have been explored. No wells have been drilled in several of Yukon's basins. Factors influencing economic opportunities in the Territory are also described, including: (1) international events and energy markets, (2) North American gas markets, (3) environmental factors, (4) competitiveness of the Yukon regime, and (5) the commitment of industry resources. 4 figs

Factors influencing detail detectability in radiologic imaging

International Nuclear Information System (INIS)

Gurvich, A.M.

1985-01-01

The detectability of various details is estimated quantitatively from the essential technical parameters of the imaging system and additional influencing factors including viewing of the image. The analysis implies the formation of the input radiation distribution (contrast formation, influence of kVp). Noise, image contrast (gamma), modulation transfer function and contrast threshold of the observer are of different influence on details of different size. Thus further optimization of imaging systems and their adaption to specific imaging tasks are facilitated

Factors influencing choice of paediatrics as a career among medical ...

African Journals Online (AJOL)

None of the male students but 12 of the female students (30%) considered gender distribution to be a factor influencing their career choice (p=0.046). Conclusion. This study indicates that paediatrics is popular among female students and that several factors influence choice of this specialty. Understanding these factors may ...

Hierarchical and coupling model of factors influencing vessel traffic flow.

Directory of Open Access Journals (Sweden)

Zhao Liu

Full Text Available Understanding the characteristics of vessel traffic flow is crucial in maintaining navigation safety, efficiency, and overall waterway transportation management. Factors influencing vessel traffic flow possess diverse features such as hierarchy, uncertainty, nonlinearity, complexity, and interdependency. To reveal the impact mechanism of the factors influencing vessel traffic flow, a hierarchical model and a coupling model are proposed in this study based on the interpretative structural modeling method. The hierarchical model explains the hierarchies and relationships of the factors using a graph. The coupling model provides a quantitative method that explores interaction effects of factors using a coupling coefficient. The coupling coefficient is obtained by determining the quantitative indicators of the factors and their weights. Thereafter, the data obtained from Port of Tianjin is used to verify the proposed coupling model. The results show that the hierarchical model of the factors influencing vessel traffic flow can explain the level, structure, and interaction effect of the factors; the coupling model is efficient in analyzing factors influencing traffic volumes. The proposed method can be used for analyzing increases in vessel traffic flow in waterway transportation system.

Factors influencing cassava - pulp fermentation period for gari ...

African Journals Online (AJOL)

Factors influencing cassava - pulp fermentation period for gari processing among ... Result of probit model analysis at 5% significance level shows an R value ... Marital status (2.236**) and respondents' cultural influences (1.960**) were ...

Quantitative influence of risk factors on blood glucose level.

Science.gov (United States)

Chen, Songjing; Luo, Senlin; Pan, Limin; Zhang, Tiemei; Han, Longfei; Zhao, Haixiu

2014-01-01

The aim of this study is to quantitatively analyze the influence of risk factors on the blood glucose level, and to provide theory basis for understanding the characteristics of blood glucose change and confirming the intervention index for type 2 diabetes. The quantitative method is proposed to analyze the influence of risk factors on blood glucose using back propagation (BP) neural network. Ten risk factors are screened first. Then the cohort is divided into nine groups by gender and age. According to the minimum error principle, nine BP models are trained respectively. The quantitative values of the influence of different risk factors on the blood glucose change can be obtained by sensitivity calculation. The experiment results indicate that weight is the leading cause of blood glucose change (0.2449). The second factors are cholesterol, age and triglyceride. The total ratio of these four factors reaches to 77% of the nine screened risk factors. And the sensitivity sequences can provide judgment method for individual intervention. This method can be applied to risk factors quantitative analysis of other diseases and potentially used for clinical practitioners to identify high risk populations for type 2 diabetes as well as other disease.

Development of natural gas vehicles in China: An assessment of enabling factors and barriers

International Nuclear Information System (INIS)

Wang, Hongxia; Fang, Hong; Yu, Xueying; Wang, Ke

2015-01-01

Replacing conventional gasoline or diesel vehicles with natural gas vehicles (NGVs) is necessary if China hopes to significantly reduce its greenhouse gas emissions in the short term. Based on city-level data, this paper analyzes the enabling factors and barriers to China's NGV development. We find that a shortage in natural gas supply and a relatively high price ratio of natural gas compared to gasoline are the main factors impeding China's NGV development. Imbalanced development between natural gas refueling stations and NGVs also hinder the popularity of these lower-carbon vehicles. While various policies have been implemented in recent years to promote NGVs in China, only those encouraging adoption of NGVs by the private sector appear effective. To promote further NGV development in China, the following strategies are proposed: (1) improve natural gas delivery infrastructure across the country; (2) reasonably reduce the relative price of natural gas compared to gasoline; (3) give priority to middle-income and medium-sized cities and towns, since siting natural gas refueling stations is easier in these areas; and (4) promote the use of NGVs in the private sector. -- Highlights: •We assess the effectiveness of NGV policies in China. •Relatively low natural gas price promotes NGV development. •Coordinated development of refueling stations and NGVs is important. •Policies that encourage private NGV development should be adopted. •Middle-income and medium-sized cities are more suitable for developing NGVs

Greenhouse gas emission factor development for coal-fired power plants in Korea

International Nuclear Information System (INIS)

Jeon, Eui-Chan; Myeong, Soojeong; Sa, Jae-Whan; Kim, Jinsu; Jeong, Jae-Hak

2010-01-01

Accurate estimation of greenhouse gas emissions is essential for developing an appropriate strategy to mitigate global warming. This study examined the characteristics of greenhouse gas emission from power plants, a major greenhouse gas source in Korea. The power plants examined use bituminous coal, anthracite, and sub-bituminous coal as fuel. The CO 2 concentration from power plants was measured using GC-FID with methanizer. The amount of carbon, hydrogen, and calorific values in the input fuel was measured using an elemental analyzer and calorimeter. For fuel analysis, CO 2 emission factors for anthracite, bituminous coal, and sub-bituminous coal were 108.9, 88.4, and 97.9 Mg/kJ, respectively. The emission factors developed in this study were compared with those for IPCC. The results showed that CO 2 emission was 10.8% higher for anthracite, 5.5% lower for bituminous coal, and 1.9% higher for sub-bituminous coal than the IPCC figures.

Factors Influencing Healthcare Service Quality

Directory of Open Access Journals (Sweden)

Ali Mohammad Mosadeghrad

2014-07-01

Full Text Available Background The main purpose of this study was to identify factors that influence healthcare quality in the Iranian context. Methods Exploratory in-depth individual and focus group interviews were conducted with 222 healthcare stakeholders including healthcare providers, managers, policy-makers, and payers to identify factors affecting the quality of healthcare services provided in Iranian healthcare organisations. Results Quality in healthcare is a production of cooperation between the patient and the healthcare provider in a supportive environment. Personal factors of the provider and the patient, and factors pertaining to the healthcare organisation, healthcare system, and the broader environment affect healthcare service quality. Healthcare quality can be improved by supportive visionary leadership, proper planning, education and training, availability of resources, effective management of resources, employees and processes, and collaboration and cooperation among providers. Conclusion This article contributes to healthcare theory and practice by developing a conceptual framework that provides policy-makers and managers a practical understanding of factors that affect healthcare service quality.

Variance of indoor radon concentration: Major influencing factors

Energy Technology Data Exchange (ETDEWEB)

Yarmoshenko, I., E-mail: ivy@ecko.uran.ru [Institute of Industrial Ecology UB RAS, Sophy Kovalevskoy, 20, Ekaterinburg (Russian Federation); Vasilyev, A.; Malinovsky, G. [Institute of Industrial Ecology UB RAS, Sophy Kovalevskoy, 20, Ekaterinburg (Russian Federation); Bossew, P. [German Federal Office for Radiation Protection (BfS), Berlin (Germany); Žunić, Z.S. [Institute of Nuclear Sciences “Vinca”, University of Belgrade (Serbia); Onischenko, A.; Zhukovsky, M. [Institute of Industrial Ecology UB RAS, Sophy Kovalevskoy, 20, Ekaterinburg (Russian Federation)

2016-01-15

Variance of radon concentration in dwelling atmosphere is analysed with regard to geogenic and anthropogenic influencing factors. Analysis includes review of 81 national and regional indoor radon surveys with varying sampling pattern, sample size and duration of measurements and detailed consideration of two regional surveys (Sverdlovsk oblast, Russia and Niška Banja, Serbia). The analysis of the geometric standard deviation revealed that main factors influencing the dispersion of indoor radon concentration over the territory are as follows: area of territory, sample size, characteristics of measurements technique, the radon geogenic potential, building construction characteristics and living habits. As shown for Sverdlovsk oblast and Niška Banja town the dispersion as quantified by GSD is reduced by restricting to certain levels of control factors. Application of the developed approach to characterization of the world population radon exposure is discussed. - Highlights: • Influence of lithosphere and anthroposphere on variance of indoor radon is found. • Level-by-level analysis reduces GSD by a factor of 1.9. • Worldwide GSD is underestimated.

Adjustable hybrid gas bearing – Influence of piezoelectrically adjusted injection on damping factors and natural frequencies of a flexible rotor operating under critical speeds

DEFF Research Database (Denmark)

Pierart, Fabián G.; Santos, Ilmar F.

2016-01-01

Damping factors and natural frequencies of a flexible rotor supported by a gas bearing with piezoelectrically adjusted flow, are theoretically determined using a rotor finite element model coupled with the modified Reynolds equation. An extra term is added to the standard formulation of Reynolds...... fourradial injectors equally pressurized. For the two configurations, the theoretical results are experimentally validated as afunction of the piezoactuators input voltage and the journal angular velocity. Results show a good agreement for natural frequencies and damping factors. Theoretical and experimental......,the damping factor associated with the first mode shape can be increased by 10 times when compared to four injectors equally pressurized....

The Pricing of natural gas

International Nuclear Information System (INIS)

Nese, Gjermund

2004-11-01

The report focuses on the pricing of natural gas. The motivation has been the wish of the Norwegian authorities to increase the use of natural gas and that this should follow market conditions. The pricing of gas occurs at present in various ways in the different markets. The report identifies to main factors behind the pricing. 1) The type of market i.e. how far the liberalization of the gas markets has gone in the various countries. 2) The development within the regulation, climate and tax policies. The gas markets are undergoing as the energy markets in general, a liberalization process where the traditional monopoly based market structures are replaced by markets based on competition. There are great differences in the liberalization development of the various countries, which is reflected in the various pricing principles applied for the trade of gas in the countries. The analysis shows that the net-back-pricing is predominant in some countries i.e. that the price is in various ways indexed towards and follow the development of the price of alternative energy carriers so that the gas may be able to compete. The development towards trade places for gas where the pricing is based on offer and demand is already underway. As the liberalization of the European gas markets progresses it is expected that the gas price will be determined increasingly at spot markets instead of through bilateral agreements between monopolistic corporations. The development within the regulation, climate and tax policies and to what extent this may influence the gas prices in the future, are also studied. There seem to be effects that may pull in both directions but it is evident that these political variables will influence the gas pricing in the international market to a large extent and thereby also the future internal natural gas market

FACTORS INFLUENCING YIELD SPREADS OF THE MALAYSIAN BONDS

Directory of Open Access Journals (Sweden)

Norliza Ahmad

2009-01-01

Full Text Available Malaysian bond market is developing rapidly but not much is understood in terms of macroeconomic factors that could influence the yield spread of the Ringgit Malaysian denominated bonds. Based on a multifactor model, this paper examines the impact of four macroeconomic factors namely: Kuala Lumpur Composite Index (KLCI, Industry Production Index (IPI, Consumer Price Index (CPI and interest rates (IR on bond yield spread of the Malaysian Government Securities (MGS and Corporate Bonds (CBs for a period from January 2001 to December 2008. The findings support the expected hypotheses that CPI and IR are the major drivers that influence the changes in MGS yield spreads. However IPI and KLCI have weak and no influence on MGS yield spreads respectively Whilst IR, CPI and IPI have significant influence on the yield spreads of CB1, CB2 and CB3, KLCI has significant influence only on the CB1 yield spread but not on CB2 and CB3 yield spreads.

Factors influencing US medical students' decision to pursue surgery.

Science.gov (United States)

Schmidt, Lauren E; Cooper, Clairice A; Guo, Weidun Alan

2016-06-01

Interest and applications to surgery have steadily decreased over recent years in the United States. The goal of this review is to collect the current literature regarding US medical students' experience in surgery and factors influencing their intention to pursue surgery as a career. We hypothesize that multiple factors influence US medical students' career choice in surgery. Six electronic databases (PubMed, SCOPUS, Web of Science, Education Resources Information Center, Embase, and PsycINFO) were searched. The inclusion criteria were studies published after the new century related to factors influencing surgical career choice among US medical students. Factors influencing US medical student surgical career decision-making were recorded. A quality index score was given to each article selected to minimize risk of bias. We identified 38 relevant articles of more than 1000 nonduplicated titles. The factors influencing medical student decision for a surgical career were categorized into five domains: mentorship and role model (n = 12), experience (clerkship n = 9, stereotype n = 4), timing of exposure (n = 9), personal (lifestyle n = 8, gender n = 6, finance n = 3), and others (n = 2). This comprehensive systemic review identifies mentorship, experience in surgery, stereotypes, timing of exposure, and personal factors to be major determinants in medical students' decisions to pursue surgery. These represent areas that can be improved to attract applicants to general surgery residencies. Surgical faculty and residents can have a positive influence on medical students' decisions to pursue surgery as a career. Early introduction to the field of surgery, as well as recruitment strategies during the preclinical and clinical years of medical school can increase students' interest in a surgical career. Copyright © 2016 Elsevier Inc. All rights reserved.

Classification of coal seam outburst hazards and evaluation of the importance of influencing factors

OpenAIRE

Shi Xianzhi; Song Dazhao; Qian Ziwei

2017-01-01

Coal and gas outbursts are the result of several geological factors related to coal seam gas (coal seam gas pressure P, coal seam sturdiness coefficient f and coal seam gas content W), and these parameters can be used to classify the outburst hazard level of a coal seam.

A survey on critical factors influencing agricultural insurance

Directory of Open Access Journals (Sweden)

Ali Valipour

2013-01-01

Full Text Available Agricultural business is a very high-risk job and an increase demand for agricultural products from one side and steady increase in production cost and weather changes, on the other side, have motivated many to use insurance for agricultural products. Insurance plays an important role in influencing crop production and insured satisfaction or farmers. The purpose of this research is to find critical components in agricultural insurance. Based on an exploration of the literature review and interviews, the proposed study of this paper extracts 24 variables and using factor analysis, we select the most important factors, which are grouped in seven categories. The implementation of our factor analysis has revealed uncertainty, moderator, market equilibrium, risky environment, empowering factor, education, training, structural hazards and natural ecosystems as the most important factors influencing agricultural industry.

Competition and trade in Australian gas markets

International Nuclear Information System (INIS)

Holmes, Leanne; Mander, Sally

1993-01-01

Although Australia has large gas reserves, the bulk of reserves (about 80 per cent) are located on the North West Shelf, off Western Australia. On the other had, the major demand centres are located in the south east of the country. The relative scarcity of proven gas reserves close to major markets has meant that governments in the state and territories with reserves have a strong vested interest in the future use of the gas. Equally, governments in states and territories that do not have gas reserves are interested in securing future supplies. The scope for increasing competition and trade in Australian gas markets depends on a number of features of the industry. These include: the characteristics of the resource, the structure of supply including the presence of natural monopolies, the nature and extent of upstream or downstream integration of firms and the presence of long term contracts - the characteristics of gas demand, and the regulatory and policy framework. The main purpose in this article is to review the economic factors driving natural gas markets in Australia, highlighting the factors influencing competition and trade. Against this background, some options for reform are also examined. 30 refs., 6 figs

Which factors influence women in the decision to breastfeed?

Directory of Open Access Journals (Sweden)

Cândida Canicali Primo

Full Text Available Objective.Identify the factors that influence women in the decision to breastfeed. Methods. Integrative review. Information was gathered from original articles, case studies, theoretical studies, consensus and systematic reviews published between 2007-2013 in Spanish, Portuguese and English and recovered in the databases MEDLINE and LILACS. The descriptors used in this study were: breastfeeding, maternal behavior, risk factors, lactation and newborn. Results. Were included 30 articles, grouped into five categories. Factors influencing the decision of the breastfeeding woman are a convergence of breastfeeding's advantages, benefits and justifications, family, social and professional support, sociodemographic and clinical characteristics of women, personal experience and family tradition and personal choice. Conclusion. The decision to breastfeed by women is influenced by a convergence of factors. It is essential the role of nursing to encourage women in the decision to initiate and maintain breastfeeding her child.

College factors that influence drinking.

Science.gov (United States)

Presley, Cheryl A; Meilman, Philip W; Leichliter, Jami S

2002-03-01

The purpose of this article is to examine the aspects of collegiate environments, rather than student characteristics, that influence drinking. Unfortunately, the existing literature is scant on this topic. A literature review of articles primarily published within the last 10 years, along with some earlier "landmark" studies of collegiate drinking in the United States, was conducted to determine institutional factors that influence the consumption of alcohol. In addition, a demonstration analysis of Core Alcohol and Drug Survey research findings was conducted to further elucidate the issues. Several factors have been shown to relate to drinking: (1) organizational property variables of campuses, including affiliations (historically black institutions, women's institutions), presence of a Greek system, athletics and 2- or 4-year designation; (2) physical and behavioral property variables of campuses, including type of residence, institution size, location and quantity of heavy episodic drinking; and (3) campus community property variables, including pricing and availability and outlet density. Studies, however, tend to look at individual variables one at a time rather than in combination (multivariate analyses). Some new analyses, using Core Alcohol and Drug Survey data sets, are presented as examples of promising approaches to future research. Given the complexities of campus environments, it continues to be a challenge to the field to firmly establish the most compelling institutional and environmental factors relating to high-risk collegiate drinking.

Overview of factors influencing the secondary market

International Nuclear Information System (INIS)

Bleistine, P.A.

1982-01-01

The major factor influencing secondary trading for the last few years has been the large contractural commitments built up by consumers for reactor programs which have proven to be unrealistic. The situation has intensified as a result of utilities needing to generate capital through inventory liquidation or reductions. The flexibilities in most contracts are inadequate to match the types of external and/or internal factors faced by the industry. This situation also suggests the need for secondary markets to help the industry adjust to unforeseen difficulties. They are very active markets at this time, but their influence in relation to the long-term method of doing business should not be exaggerated

Factors influencing job satisfaction of oncology nurses over time.

Science.gov (United States)

Cummings, Greta; Olson, Karin; Raymond-Seniuk, Christy; Lo, Eliza; Masaoud, Elmabrok; Bakker, Debra; Fitch, Margaret; Green, Esther; Butler, Lorna; Conlon, Michael

2013-01-01

In this study, we tested a structural equation model to examine work environment factors related to changes in job satisfaction of oncology nurses between 2004 and 2006. Relational leadership and good physician/nurse relationships consistently influenced perceptions of enough RNs to provide quality care, and freedom to make patient care decisions, which, in turn, directly influenced nurses' job satisfaction over time. Supervisor support in resolving conflict and the ability to influence patient care outcomes were significant influences on job satisfaction in 2004, whereas, in 2006, a clear philosophy of nursing had a greater significant influence. Several factors that influence job satisfaction of oncology nurses in Canada have changed over time, which may reflect changes in work environments and work life. These findings suggest opportunities to modify work conditions that could improve nurses' job satisfaction and work life.

Factors influencing warfarin control in Australia and Singapore.

Science.gov (United States)

Bernaitis, Nijole; Ching, Chi Keong; Teo, Siew Chong; Chen, Liping; Badrick, Tony; Davey, Andrew K; Crilly, Julia; Anoopkumar-Dukie, Shailendra

2017-09-01

Warfarin is widely used for patients with non-valvular atrial fibrillation (NVAF). Variations in warfarin control, as measured by time in therapeutic range (TTR), have been reported across different regions and ethnicities, particularly between Western and Asian countries. However, there is limited data on comparative factors influencing warfarin control in Caucasian and Asian patients. Therefore, the aim of this study was to determine warfarin control and potential factors influencing this in patients with NVAF in Australia and Singapore. Retrospective data was collected for patients receiving warfarin for January to June 2014 in Australia and Singapore. TTR was calculated for individuals with mean patient TTR used for analysis. Possible influential factors on TTR were analysed including age, gender, concurrent co-morbidities, and concurrent medication. The mean TTR was significantly higher in Australia (82%) than Singapore (58%). At both sites, chronic kidney disease significantly lowered this TTR. Further factors influencing control were anaemia and ageWarfarin control was significantly higher in Australia compared to Singapore, however chronic kidney disease reduced control at both sites. The different levels of control in these two countries, together with patient factors further reducing control may impact on anticoagulant choice in these countries with better outcomes from warfarin in Australia compared to Singapore. Copyright © 2017 Elsevier Ltd. All rights reserved.

Canadian natural gas price debate : TCGS view

International Nuclear Information System (INIS)

Johnson, J.

1998-01-01

Issues regarding the Alberta supply of natural gas were debated. Factors considered include pipeline expansions, storage and foreign exchange. The influence of NYMEX was also cited as an important determinant of gas pricing. Currently, the Western Canada Sedimentary Basin's (WCSB) market share is 22 per cent of the North American demand. The WCSB extends through Alberta, British Columbia, Saskatchewan, the Northwest Territories and the Yukon. The Basin's estimated reserves at the end of 1996 were 65 TCF. tabs., figs

Global gas strategies: a major player's perspective

International Nuclear Information System (INIS)

Brown, R.L.

1996-01-01

Changes in the world demand for energy and discovery of further reserves of natural gas world-wide mean that the natural gas industry is poised to expand its influence on the global fuel markets. This paper explores the industry's potential for expansion, the need for a dynamic approach to change and a respect for the complexity of market forces. Guidelines for success in expansion are drawn up. The virtues of natural gas in relation to environmental factors and diversity of supply, through pipelines or LNG, are extolled and the industry urged to grasp the challenge of the competitive global market fuels. (UK)

Natural gas pricing: concepts and international overview

Energy Technology Data Exchange (ETDEWEB)

Gorodicht, Daniel Monnerat [Gas Energy, Rio de Janeiro, RJ (Brazil); Veloso, Luciano de Gusmao; Fidelis, Marco Antonio Barbosa; Mathias, Melissa Cristina Pinto Pires [Agencia Nacional do Petroleo, Gas Natural e Biocombustiveis (ANP), Rio de Janeiro, RJ (Brazil)

2012-07-01

The core of this article is a critical analysis of different forms of pricing of natural gas existing in the world today. This paper is to describe the various scenarios of natural gas price formation models. Along the paper, the context is emphasized by considering their cases of applications and their results. Today, basically, there are three main groups of models for natural gas pricing: i) competition gas-on-gas, i.e., a liberalized natural gas market, II) gas indexed to oil prices or its products and III) bilateral monopolies and regulated prices. All the three groups of models have relevant application worldwide. Moreover, those are under dynamic influence of economic, technological and sociopolitical factors which bring complexity to the many existing scenarios. However, at first this paper builds a critical analysis of the international current situation of natural gas today and its economic relevance. (author)

Clinical factors influencing participation in society after successful kidney transplantation

NARCIS (Netherlands)

van der Mei, S.F.; Groothoff, J.W.; van Sonderen, E.L.P.; van den Heuvel, W.J.A.; de Jong, P.E.; van Son, W.J.

2006-01-01

Background. Little information is available on the degree of actual social functioning after successful kidney transplantation. Moreover, information on factors that influence participation in social activities is scarce. The aim of this study was to examine the influence of clinical factors on

Membrane Separation of Gas Mixtures under the Influence of Resonance Radiation.

Czech Academy of Sciences Publication Activity Database

Levdansky, Valerij Vladimirovič; Izák, Pavel

2017-01-01

Roč. 173, FEB (2017), s. 93-98 ISSN 1383-5866 R&D Projects: GA ČR GA14-12695S Institutional support: RVO:67985858 Keywords : membranes * gas mixture * separation Subject RIV: CI - Industrial Chemistry, Chemical Engineering OBOR OECD: Chemical process engineering Impact factor: 3.359, year: 2016

Underground storage of natural gas and LPG

International Nuclear Information System (INIS)

1990-01-01

The Symposium attended by over 200 participants from 23 member countries of the Economic Commission for Europe (ECE), representatives from Australia, Iraq, Israel, Kuwait as well as from 5 international organizations, provided an opportunity for existing and prospective gas markets in the ECE region to exchange experience and information on current trends and developments in natural gas and liquefied petroleum gas underground storage, especially in technical and regulatory matters, including economic, market and social considerations, that influence the planning, development and operations of gas storage facilities. Environmental and safety factors associated with such operations were also examined. A separate abstract was prepared for each of the presented papers. Refs, figs and tabs

Gas pricing in developing countries: A case study of Pakistan

International Nuclear Information System (INIS)

Sohail, H.M.; Abid, M.S.; Ansari, A.M.

1994-01-01

Pakistan, a developing country, has gone through various phases of formulating gas pricing policies during its 40-year history of natural gas production and consumption. This paper identifies critical factors that influenced gas pricing policies in Pakistan and adverse effects experienced when any of these factors was not given proper consideration. For instance, on the producer's side, discounted pricing formulas discouraged further exploration and development, leaving high-potential areas unexplored and discovered fields dormant for more than a decade. On the consumer's side, subsidized gas prices encouraged consumption to rise steeply without new discoveries to offset additional surplus consumption. The paper also discusses various short- and long-term variables that should go into a gas pricing policy for developing countries. References to recent policies are also given, indicating how these variables were incorporated in real terms. The conclusions and recommendations, based on Pakistan's long experience with the gas industry, should be useful for other oil-importing countries rich in indigenous gas resources

Factors influencing home care nurse intention to remain employed.

Science.gov (United States)

Tourangeau, Ann; Patterson, Erin; Rowe, Alissa; Saari, Margaret; Thomson, Heather; MacDonald, Geraldine; Cranley, Lisa; Squires, Mae

2014-11-01

To identify factors affecting Canadian home care nurse intention to remain employed (ITR). In developed nations, healthcare continues to shift into community settings. Although considerable research exists on examining nurse ITR in hospitals, similar research related to nurses employed in home care is limited. In the face of a global nursing shortage, it is important to understand the factors influencing nurse ITR across healthcare sectors. A qualitative exploratory descriptive design was used. Focus groups were conducted with home care nurses. Data were analysed using qualitative content analysis. Six categories of influencing factors were identified by home care nurses as affecting ITR: job characteristics; work structures; relationships/communication; work environment; nurse responses to work; and employment conditions. Findings suggest the following factors influence home care nurse ITR: having autonomy; flexible scheduling; reasonable and varied workloads; supportive work relationships; and receiving adequate pay and benefits. Home care nurses did not identify job satisfaction as a single concept influencing ITR. Home care nursing management should support nurse autonomy, allow flexible scheduling, promote reasonable workloads and create opportunities for team building that strengthen supportive relationships among home care nurses and other health team members. © 2013 John Wiley & Sons Ltd.

Influence of precooling cooling air on the performance of a gas turbine combined cycle

Energy Technology Data Exchange (ETDEWEB)

Kwon, Ik Hwan; Kang, Do Won; Kang, Soo Young; Kim, Tong Seop [Inha Univ., Incheon (Korea, Republic of)

2012-02-15

Cooling of hot sections, especially the turbine nozzle and rotor blades, has a significant impact on gas turbine performance. In this study, the influence of precooling of the cooling air on the performance of gas turbines and their combined cycle plants was investigated. A state of the art F class gas turbine was selected, and its design performance was deliberately simulated using detailed component models including turbine blade cooling. Off design analysis was used to simulate changes in the operating conditions and performance of the gas turbines due to precooling of the cooling air. Thermodynamic and aerodynamic models were used to simulate the performance of the cooled nozzle and rotor blade. In the combined cycle plant, the heat rejected from the cooling air was recovered at the bottoming steam cycle to optimize the overall plant performance. With a 200K decrease of all cooling air stream, an almost 1.78% power upgrade due to increase in main gas flow and a 0.70 percent point efficiency decrease due to the fuel flow increase to maintain design turbine inlet temperature were predicted.

Environmental factors influencing fluctuation of share prices on ...

African Journals Online (AJOL)

Environmental factors influencing fluctuation of share prices on Nigeria stock exchange market. ... What are these environmental variables that affect the fluctuation of share prices in Nigeria? ... The results show inflation, money supply, total deficits index of industrial production, interest rate and GDP influence stock prices.

Factors Influencing Visual Outcome after Surgery for Retinal ...

African Journals Online (AJOL)

Dr femi Oderinlo

Three factors favourably affected visual outcome and were of statistical ... These changes are likely to affect the. 10,11 ... within the South Western geopolitical region of Nigeria is one of the ... tamponade (silicon oil or C F gas in a single case), or a combination ..... studies also had similar final anatomic success rates, 90.2%.

Modeling of Thermal Behavior of Raw Natural Gas Air Coolers

Science.gov (United States)

Scherbinin, S. V.; Prakhova, M. Yu; Krasnov, A. N.; Khoroshavina, E. A.

2018-05-01

When gas is being prepared for a long-range transportation, it passes through air cooling units (ACUs) after compressing; there, hot gas passing through finned tubes is cooled with air streams. ACU's mode of operation shall ensure a certain value of gas temperature at the ACU's outlet. At that, when cooling raw gas, temperature distribution along all the tubes shall be known to prevent local hydrate formation. The paper proposes a mathematical model allowing one to obtain a thermal field distribution inside the ACU and study influence of various factors onto it.

The influence of the reactor pressure on the hydrodynamics in a cocurrent gas-liquid trickle-bed reactor

NARCIS (Netherlands)

Wammes, W.J.A.; Westerterp, K.R.

1990-01-01

The influence of the reactor pressure on the liquid hold-up in the trickle-flow regime and on the transition between trickle-flow and pulse-flow has been investigated in a trickle-flow column operating up to 6.0 MPa with water, and nitrogen or helium as the gas phase. The effect of the gas velocity

An investigation on factors influencing on human resources productivity

Directory of Open Access Journals (Sweden)

Masoumeh Seifi Divkolaii

2014-05-01

Full Text Available Human resources development is one of the most important components of any organization and detecting important factors influencing on human resources management plays essential role on the success of the firms. In this paper, we present an empirical investigation to determine different factors influencing productivity of human resources of Islamic Republic of Iran Broadcasting (IRIB in province of Mazandaran, Iran. The study uses analytical hierarchy process (AHP to rank 17 important factors and determines that personal characteristics were the most important factors followed by management related factors and environmental factors. In terms of personal characteristics, job satisfaction plays essential role on human resources development. In terms of managerial factors, paying attention on continuous job improvement by receiving appropriate training is the most important factor followed by welfare facilities for employees and using a system of reward/punishment in organization. Finally, in terms of environmental factors, occupational safety is number one priority followed by organizational rules and regulations.

THE INFLUENCE OF CORPORATE SPECIFIC FACTORS UPON FINANCING DECISIONS

Directory of Open Access Journals (Sweden)

Lacatus Viorel-Dorin

2013-07-01

Full Text Available The purpose of this paper is to analyze the existing theories for the capital structure of a corporation and to determine the factors that influence the financing decisions of Romanian corporations. The gearing ratios vary a lot among Romanian corporations pointing out the fact that the internal specific factors are the ones with a greater impact upon their capital structure, and not the external factors. Our empiric research evaluates the determining factors for the debt ratio (total debt/total assets of some Romanian corporations, focusing on its explanatory variables by including them within simple and multiple econometric models. The panel data indicators computed for the companies in the Cluj area listed on the Bucharest Stock Exchange were evaluated with the OLS and FEM techniques.The results have been interpreted, pointing out that company size and asset turnover seem to have a positive influence upon the debt ratio of selected companies, while profitability and liquidity seem to influence the debt ratio of selected companies negatively.

Maturity of hospital information systems: Most important influencing factors.

Science.gov (United States)

Vidal Carvalho, João; Rocha, Álvaro; Abreu, António

2017-07-01

Maturity models facilitate organizational management, including information systems management, with hospital organizations no exception. This article puts forth a study carried out with a group of experts in the field of hospital information systems management with a view to identifying the main influencing factors to be included in an encompassing maturity model for hospital information systems management. This study is based on the results of a literature review, which identified maturity models in the health field and relevant influencing factors. The development of this model is justified to the extent that the available maturity models for the hospital information systems management field reveal multiple limitations, including lack of detail, absence of tools to determine their maturity and lack of characterization for stages of maturity structured by different influencing factors.

Development of lab scale fast gas injection system for SST-1 Tokamak

International Nuclear Information System (INIS)

Pathan, F.S.; Banaudha, Moni; Khristi, Yohan; Khan, M.S.; Khan, Ziauddin; Raval, D.C.; Khirwadkar, Samir

2017-01-01

The plasma density control plays an important role in Tokamak operation. The factors that influence plasma density in a Tokamak device are working gas injection, pumping, ionization rate and the recycle coefficient representing the wall conditions. Among these factors, gas injection is relatively convenient to be controlled. Hence, the most frequently adopted method to control the plasma density is to control the fast gas injection. This paper describes the design and experimental work carried out towards the development of Fast Gas Injection System for SST-1 Tokamak. Laboratory based test setup was successfully established for Fast Gas Injection System that can feed predefined quantity of gas in a controlled manner into vacuum chamber. Further, this FGIS system will be implemented in SST-1 Tokamak environment with online density feedback signal

FACTORS INFLUENCING THE PURCHASE DECISION OF ORGANIC TOFU

Directory of Open Access Journals (Sweden)

Tantry Nugroho

2015-09-01

Full Text Available This study aimed to analyze the factors that influence consumers in making the decision to buy organic tofu. The theory of factors that influence the purchasing behavior developed by Kotler was used as the analytical tool, and these factors include cultural factors, social factors, personal factors, psychological factors and purchasing process. These data were collected through interview techniques and analyzed descriptively using multinomial logistic regression. The characteristics of respondents indicated the consumers who never bought organic tofu are mostly at the age of 26-35 years old and university graduates, do not work, have an expenditure from Rp 1 million to Rp 2.5 million, are highly knowledge, and have the highest scores on the perceptions on sustainable and environmentally friendly organic farming, health benefits, and a more expensive price. There are a number of factors that influence consumers in making purchase decisions of organic tofu including age, education, knowledge and product external factors. The consumers who are potentially interested in purchasing the organic tofu are at the age of 36–50 years old, university graduates, highly knowledgeable in food and organic tofu products, because the higher the education and knowledge, the greater the interest in buying the products, and they approved of the external products such as price, advertising, personal selling and places of selling which are also potentially equal. The managerial implications for the business agents of tofu organic product is that they must be more active in assuring the consumers that these products are good for them by creating a blog, an ad in the local paper, or a pamphlet containing information of the product.Keywords: purchase decision, logistic regression, organic tofu product, purchasing interest

A Review of Factors Influencing Athletes' Food Choices.

Science.gov (United States)

Birkenhead, Karen L; Slater, Gary

2015-11-01

Athletes make food choices on a daily basis that can affect both health and performance. A well planned nutrition strategy that includes the careful timing and selection of appropriate foods and fluids helps to maximize training adaptations and, thus, should be an integral part of the athlete's training programme. Factors that motivate food selection include taste, convenience, nutrition knowledge and beliefs. Food choice is also influenced by physiological, social, psychological and economic factors and varies both within and between individuals and populations. This review highlights the multidimensional nature of food choice and the depth of previous research investigating eating behaviours. Despite numerous studies with general populations, little exploration has been carried out with athletes, yet the energy demands of sport typically require individuals to make more frequent and/or appropriate food choices. While factors that are important to general populations also apply to athletes, it seems likely, given the competitive demands of sport, that performance would be an important factor influencing food choice. It is unclear if athletes place the same degree of importance on these factors or how food choice is influenced by involvement in sport. There is a clear need for further research exploring the food choice motives of athletes, preferably in conjunction with research investigating dietary intake to establish if intent translates into practice.

The influence of the internal microbiome on the materials used for construction of the transmission natural gas pipelines in the Lodz Province

OpenAIRE

Staniszewska Agnieszka; Jastrzębska Magdalena; Ziemiński Krzysztof

2017-01-01

This paper presents investigation results of the influence of gas microbes on the biocorrosion rate of the materials used for gas pipelines construction in the Lodz Province. Samples of two types of carbon steel and cast iron were stored in the laboratory pipeline model reflecting the real conditions of working natural gas pipelines were. In the next step the influence of cathodic protection with parameters recommended for protection of underground structures was tested. Analyses of biologica...

Prediction of Gas Injection Performance for Heterogeneous Reservoirs

Energy Technology Data Exchange (ETDEWEB)

Blunt, Martin J.; Orr, Franklin M.

1999-05-17

This report describes research carried out in the Department of Petroleum Engineering at Stanford University from September 1997 - September 1998 under the second year of a three-year grant from the Department of Energy on the "Prediction of Gas Injection Performance for Heterogeneous Reservoirs." The research effort is an integrated study of the factors affecting gas injection, from the pore scale to the field scale, and involves theoretical analysis, laboratory experiments, and numerical simulation. The original proposal described research in four areas: (1) Pore scale modeling of three phase flow in porous media; (2) Laboratory experiments and analysis of factors influencing gas injection performance at the core scale with an emphasis on the fundamentals of three phase flow; (3) Benchmark simulations of gas injection at the field scale; and (4) Development of streamline-based reservoir simulator. Each state of the research is planned to provide input and insight into the next stage, such that at the end we should have an integrated understanding of the key factors affecting field scale displacements.

The influence of the gas flow rate during methane biofiltration on an inorganic packing material

Energy Technology Data Exchange (ETDEWEB)

Nikiema, J.; Heitz, M. [Sherbrooke Univ., PQ (Canada). Dept. of Chemical Engineering

2009-02-15

Sanitary landfills are a major anthropogenic source of methane (CH{sub 4}), an important greenhouse gas (GHG). In 2005, sanitary landfills contributed nearly 25 per cent of the total atmospheric CH{sub 4} emissions in Canada. In order to address this concern, 52 landfills were equipped with gas collection systems in 2005. This study measured the influence of the gas flow rate (GFR) on CH{sub 4} elimination through biofiltration and estimated the maximum level of GFR that allowed conversions within the biofilter above 90 per cent. Since CH{sub 4} biodegrades in the biofilter due to microbial activity, the efficiency of this bioprocess is affected by the number and type of microorganisms present in the biofilter. This study also compared the performance of the biofilter under different gas flow regimes, at two different phosphorus concentrations. The experiments involved the use of a nitrogen minimal salt nutrient solution, for the biofilter periodic irrigation, in which the nitrogen concentration was maintained at 0.75 g/L, while the phosphorus concentration was 1.5 g/L. The objective was to determine if the phosphorus concentration can modify the influence of the GFR on the biofilter. The results showed that the GFR is an important parameter which affects the biofilter performance. It was concluded that the biofiltration process requires a high phosphorus level in the nutrient solution. 23 refs., 2 tabs., 5 figs.

Influence of spatially dependent, modeled soil carbon emission factors on life-cycle greenhouse gas emissions of corn and cellulosic ethanol

Energy Technology Data Exchange (ETDEWEB)

Qin, Zhangcai [Energy Systems Division, Argonne National Laboratory, 9700 South Cass Avenue Argonne IL 60439 USA; Dunn, Jennifer B. [Energy Systems Division, Argonne National Laboratory, 9700 South Cass Avenue Argonne IL 60439 USA; Kwon, Hoyoung [Environment and Production Technology Division, International Food Policy Research Institute, 2033 K St. NW Washington DC 20006 USA; Mueller, Steffen [Energy Resources Center, University of Illinois at Chicago, 1309 South Halsted Street Chicago IL 60607 USA; Wander, Michelle M. [Department of Natural Resources and Environmental Sciences, University of Illinois at Urbana-Champaign, 1102 South Goodwin Avenue Urbana IL 61801 USA

2016-03-03

Converting land to biofuel feedstock production incurs changes in soil organic carbon (SOC) that can influence biofuel life-cycle greenhouse gas (GHG) emissions. Estimates of these land use change (LUC) and life-cycle GHG emissions affect biofuels’ attractiveness and eligibility under a number of renewable fuel policies in the U.S. and abroad. Modeling was used to refine the spatial resolution and depth-extent of domestic estimates of SOC change for land (cropland, cropland pasture, grasslands, and forests) conversion scenarios to biofuel crops (corn, corn stover, switchgrass, Miscanthus, poplar, and willow). In most regions, conversions from cropland and cropland pasture to biofuel crops led to neutral or small levels of SOC sequestration, while conversion of grassland and forest generally caused net SOC loss. Results of SOC change were incorporated into the Greenhouse Gases, Regulated Emissions, and Energy use in Transportation (GREET) model to assess their influence on life-cycle GHG emissions for the biofuels considered. Total LUC GHG emissions (g CO2eq MJ-1) were 2.1–9.3 for corn, -0.7 for corn stover, -3.4–12.9 for switchgrass, and -20.1–-6.2 for Miscanthus; these varied with SOC modeling assumptions applied. Extending soil depth from 30 to 100cm affected spatially-explicit SOC change and overall LUC GHG emissions; however the influence on LUC GHG emissions estimates were less significant in corn and corn stover than cellulosic feedstocks. Total life-cycle GHG emissions (g CO2eq MJ-1, 100cm) were estimated to be 59–66 for corn ethanol, 14 for stover ethanol, 18-26 for switchgrass ethanol, and -0.6–-7 for Miscanthus ethanol.

Influence of Macroeconomic Factors on Residential Property ...

African Journals Online (AJOL)

Sultan

exerted by macroeconomic factors on residential property returns in Abuja. The backward .... explanatory power and positive influence of employment and ...... Project. Management In Property Development: the Nigeria experience. Ibadan:.

Factors Influencing Self Employment Media Service Providers ...

African Journals Online (AJOL)

Factors Influencing Self Employment Media Service Providers among Tertiary ... role stereotype and common business practices on media self employment in ... Sex, Psycho-social Characteristics, self Employment, Providing Media Services.

Factors influencing societal response of nanotechnology : an expert stakeholder analysis

OpenAIRE

Gupta, N.; Fischer, A.R.H.; Lans, van der, I.A.; Frewer, L.J.

2012-01-01

Nanotechnology can be described as an emerging technology and, as has been the case with other emerging technologies such as genetic modification, different socio-psychological factors will potentially influence societal responses to its development and application. These factors will play an important role in how nanotechnology is developed and commercialised. This article aims to identify expert opinion on factors influencing societal response to applications of nanotechnology. Structured i...

Factors influencing societal response of nanotechnology: an expert stakeholder analysis

OpenAIRE

Gupta, Nidhi; Fischer, Arnout R. H.; van der Lans, Ivo A.; Frewer, Lynn J.

2012-01-01

Nanotechnology can be described as an emerging technology and, as has been the case with other emerging technologies such as genetic modification, different socio-psychological factors will potentially influence societal responses to its development and application. These factors will play an important role in how nanotechnology is developed and commercialised. This article aims to identify expert opinion on factors influencing societal response to applications of nanotechnology. Structured i...

Factors Influencing Choice of Inguinal Hernia Repair Technique

African Journals Online (AJOL)

This study sought to highlight factors that may influence ... Experienced peers play a major role in training on the various repair ... Reasons influencing choice of repair technique include training ... (after appendectomy) accounting for 10 to 15% of all surgical ..... in medical school [as undergraduate students or as residents].

Influence of gas injection on viscous and viscoelastic properties of Xanthan gum.

Science.gov (United States)

Bobade, Veena; Cheetham, Madalyn; Hashim, Jamal; Eshtiaghi, Nicky

2018-05-01

Xanthan gum is widely used as a model fluid for sludge to mimic the rheological behaviour under various conditions including impact of gas injection in sludge. However, there is no study to show the influence of gas injection on rheological properties of xanthan gum specifically at the concentrations at which it is used as a model fluid for sludge with solids concentration above 2%. In this paper, the rheological properties of aqueous xanthan gum solutions at different concentrations were measured over a range of gas injection flow rates. The effect of gas injection on both the flow and viscoelastic behaviour of Xanthan gum (using two different methods - a creep test and a time sweep test) was evaluated. The viscosity curve of different solid concentrations of digested sludge and waste activated sludge were compared with different solid concentrations of Xanthan gum and the results showed that Xanthan gum can mimic the flow behaviour of sludge in flow regime. The results in linear viscoelastic regime showed that increasing gas flow rate increases storage modulus (G'), indicating an increase in the intermolecular associations within the material structure leading to an increase in material strength and solid behaviour. Similarly, in creep test an increase in the gas flow rate decreased strain%, signifying that the material has become more resistant to flow. Both observed behaviour is opposite to what occurs in sludge under similar conditions. The results of both the creep test and the time sweep test indicated that choosing Xanthan gum aqueous solution as a transparent model fluid for sludge in viscoelastic regime under similar conditions involving gas injection in a concentration range studied is not feasible. However Xanthan gum can be used as a model material for sludge in flow regime; because it shows a similar behaviour to sludge. Copyright © 2018 Elsevier Ltd. All rights reserved.

China's natural gas consumption and subsidies—From a sector perspective

International Nuclear Information System (INIS)

Wang, Ting; Lin, Boqiang

2014-01-01

China's natural gas consumption is growing rapidly and it has being driven by economic growth, industrialization and urbanization. In addition, the country's low-carbon development strategy, government-controlled gas price, and some other factors also contribute to the surging gas consumption. This paper studies China's natural gas consumption in residential, industrial and commercial sectors. We adopt the cointegration test and error correction model to study the relationships of explanatory factors and gas consumption of different sectors and climate factor is included into the analysis. In order to find the direction of natural gas pricing reform and establish the benchmark gas price, this paper also estimates the size of gas price subsidy by using price-gap approach. Our findings are as follows: In the long term, China's residential sector is more sensitive to price than the other two. Urbanization is an important factor promoting industrial and commercial gas consumption. Prices of other energies have an influence on natural gas consumption significantly due to the substitutability between energies. The slow-moving and unsatisfying pricing reforms on refined oil and natural gas lead to positive price elasticity of natural gas in the commercial sector, which implies that a further energy price reform is still stringent for China. - Highlights: • We figured out the price elasticity of different sectors. • We figured out the income elasticity of different sectors. • We introduced temperature factor into the study of natural gas consumption. • We study the natural gas subsidy of different sectors

Factors Influencing Information and Communication Technology ...

African Journals Online (AJOL)

Information and communication technology (ICT) is a veritable tool for sustainable agricultural development in Nigeria. This paper analyzed the factors that influenced ICT use by women research scientists in the Universities of Agriculture in Nigeria. Simple random sampling technique was used to select 40 respondents per ...

Economic evaluation of biogas and natural gas co-firing in gas turbine combined heat and power systems

International Nuclear Information System (INIS)

Kang, Jun Young; Kang, Do Won; Kim, Tong Seop; Hur, Kwang Beom

2014-01-01

This study investigated the economics of co-firing biogas and natural gas within a small gas turbine combined heat and power (CHP) plant. The thermodynamic performance of the CHP plant was calculated with varying gas mixing ratios, forming the basis for the economic analysis. A cost balance equation was used to calculate the costs of electricity and heat. The methodology was validated, and parametric analyses were used to investigate the influence of gas mixing ratio and heat sales ratio on the costs of electricity and heat. The cost of electricity generation from the CHP plant was compared to that of a central combined cycle power plant, and an economical gas mixing ratio range were suggested for various heat sales ratios. It was revealed that the effect of the heat sales ratio on the cost of electricity becomes greater as the proportion of natural gas is increased. It was also demonstrated that the economic return from the installation of CHP systems is substantially affected by the gas mixing ratio and heat sales ratio. Sensitivity analysis showed that influence of economic factors on the CHP plant is greater when a higher proportion of natural gas is used. - Highlights: • An appropriate method to calculate the costs of electricity (COE) and heat (COH) was established. • Both COE and COH increase with increasing natural gas mixing ratio and decreasing heat sales ratio. • The effect of the heat sales ratio on the COE becomes greater as the mixing ratio increases. • The payback period is considerably dependent on the mixing ratio and heat sales ratio

Factors Influencing Part-time Faculty Engagement With Online Nursing Programs.

Science.gov (United States)

Reneau, Margaret; Wallace, Cara; Claywell, Lora; Price, Jill; Burdi, Melissa; Trybulski, Joanne

2018-03-28

This research investigated factors that influenced the engagement of part-time faculty teaching in online nursing programs with their institutions. Of the 257 part-time faculty surveyed, the most significant factor was being supported in decisions regarding student issues, followed by institutional commitment to quality online education. Compensation was moderately influential; a negative factor was requiring too frequent meetings. Understanding factors that influence the engagement of part-time faculty teaching in online nursing programs can help leaders of online programs attract and retain experienced, highly skilled faculty.

Tuning of Preparational Factors Affecting the Morphological Structure and Gas Separation Property of Asymmetric Polysulfone Membranes

Science.gov (United States)

Yuenyao, C.; Ruangdit, S.; Chittrakarn, T.

2017-09-01

The aim of this work was to study the effect of preparational factors such as solvent type, evaporation time (ET) and non-solvent additive, on the morphological structure, physical and gas separation properties of the prepared membrane samples by tuning of these parameters. Flat sheet asymmetric polysulfone (PSF) membranes were prepared by the dry/wet phase inversion process combined with the double coagulation bath method. The alteration of the prepared membranes were analyzed through scientific techniques such as Scanning Electron Microscope (SEM) and Dynamic Mechanical Thermal Analysis (DMTA). Furthermore, gas separation performance of membrane samples was measured in term of gas permeation and ideal selectivity of CO2/CH4. Experimental results showed that the change of preparational factors affected to the gas permeation of asymmetric PSF membranes. For example, the selective layer thickness increased with increasing of ET. This lead to increase significantly of ideal selectivity of CO2/CH4. The CO2/CH4 ideal selectivity was also increased with increase of ethanol (non-solvent additive) concentration in casting solution. In summary, the tuning of preparational factors affected to morphological structure, physical and gas separation properties of PSF membranes.

Factors influencing in situ gamma-ray measurements

Science.gov (United States)

Loonstra, E. H.; van Egmond, F. M.

2009-04-01

can be overcome using Full Spectrum Analysis (FSA). This method incorporates virtually all data present in the measured gamma spectrum. In FSA, a Chi-squared algorithm is used to fit a set of "Standard Spectra" to the measured spectrum. The uncertainty in the FSA method is at least a factor 2 lower compared to the Windows method. Environmental conditions Environmental conditions can influence the signal output and therefore the quality. In general, the density of the medium through which gamma-radiation travels determines the interaction of the radiation with matter and thus affects the sensor readings. Excluding soil as being the source; water is the most important external factor in this respect. The amount of water in soil will affect the signal. In general, energy loss occurs as water content in soil increases. As a result, the nuclide concentrations will be lower. Monte Carlo simulations show a difference of 16% in nuclide concentration for completely dry and fully saturated sandy soils. Another water related issue is rainfall. With rain radon gas, a product of 238U, will precipitate. This causes spectral noise effects. Snow and fog have the same effect to a minor degree. Another aspect is the openness of soil. From experience we know that the concentration of 40K differs if soil is tilled. Finally, on earth there is always radioactive noise present from the galaxy. The "Standard Spectra" used in the FSA method can take noise and geometric effects into account. Operational circumstances During a survey an operator should be aware of the effects of driving speed and measurement height. In general, a larger crystal has better energy efficiency and is therefore more suitable for high speed. E.g. a 70 x 150 mm CsI crystal provides qualitative satisfactory output for soil mapping up to 10 km/hr. Sample locations, however, are best measured during a longer period (3 to 5 minutes). The measurement height affects the measurement resolution; the lower the sensor, the

FACTORS INFLUENCING BRAND EQUITY OF BALI AS A TOURISM DESTINATION

Directory of Open Access Journals (Sweden)

I Ketut Surya Diarta

2016-03-01

Full Text Available Globally, competition among tourism destinations is more stringent in getting foreign tourists, including Bali. One effort to win the competition is increasing destination brand equity through maintaining its influencing factors and gaining tourist positive behavior toward destination. This effort, in long run, will increase and stabilize destination revenue and sustainability. This research aims to analyze factors influencing brand equity of Bali as a tourism destination. This research was conducted in Bali’s five major tourism objects. The 240 foreign tourists were chosen as respondents through convenience sampling technique. Data were analyzed using factor analysis. The results showed that factors that significantly influenced Bali brand equity were: symbolic and experiential benefit factor, direct and indirect destinations attributes, destination reliability and tangibility, assurance and empathy, brand destinations recognition and recall, destinations common psychological attributes, destination common functional attributes, unique functional attributes, behavioral loyalty, destination awareness, and attitudinal loyalty. Given the fluctuative nature of brand equity, Bali needs a consistent effort to maintain or to enhance brand equity of Bali as a tourism destination. Maintaining the dominant factors that influence the strength of brand equity can be used as a basis to develop destination branding strategy to expand market segment,  choose the right target market, and anchoring destination position in world market competition.

Factors That Influence the Practice of Elective Induction of Labor

Science.gov (United States)

Moore, Jennifer; Low, Lisa Kane

2012-01-01

Elective induction of labor has been linked to increased rates of prematurity and rising rates of cesarean birth. The purpose of this investigation was to evaluate current trends in induction of labor scholarship focusing on evidence-based factors that influence the practice of elective induction. A key word search was conducted to identify studies on the practice of elective induction of labor. Analysis of the findings included clustering and identification of recurrent themes among the articles with 3 categories being identified. Under each category, the words/phrases were further clustered until a construct could be named. A total of 49 articles met inclusion criteria: 7 patient, 6 maternity care provider, and 4 organization factors emerged. Only 4 of the articles identified were evidence based. Patient factors were divided into preferences/convenience, communication, fear, pressure/influence, trust, external influences, and technology. Provider factors were then divided into practice preferences/convenience, lack of information, financial incentives, fear, patient desire/demand, and technology. Organization factors were divided into lack of enforcement/accountability, hospital culture, scheduling of staff, and market share issues. Currently, there is limited data-based information focused on factors that influence elective induction of labor. Despite patient and provider convenience/preferences being cited in the literature, the evidence does not support this practice. PMID:22843006

Soil sealing degree as factor influencing urban soil contamination with polycyclic aromatic hydrocarbons (PAHs

Directory of Open Access Journals (Sweden)

Mendyk Łukasz

2016-03-01

Full Text Available The objective of the study was to determine role of soil sealing degree as the factor influencing soil contamination with polycyclic aromatic hydrocarbons (PAHs. The study area included four sampling sites located within the administrative boundaries of the Toruń city, Poland. Sampling procedure involved preparing soil pits representing three examples of soil sealing at each site: non-sealed soil as a control one (I and two degrees of soil sealing: semi-pervious surface (II and totally impervious surface (III. Together with basic properties defined with standard procedures (particle size distribution, pH, LOI, content of carbonates content of selected PAHs was determined by dichloromethane extraction using gas chromatography with mass spectrometric detection (GC-MS. Obtained results show that urban soils in the city of Toruń are contaminated with polycyclic aromatic hydrocarbons. Soil sealing degree has a strong influence on the soil contamination with polycyclic aromatic hydrocarbons. Totally sealed soils are better preserved from atmospheric pollution including PAHs. Combustion of grass/wood/coal was the main source of determined PAHs content in examined soils.

Factors Influencing Tacit Knowledge in Construction

Directory of Open Access Journals (Sweden)

Jawahar Nesan

2012-11-01

Full Text Available Increased complexity of the construction business and consequentuse of new management concepts and technologies ledconstruction organisations to focus more on the transfer of explicitknowledge. However, it is the tacit knowledge that determinesthe construction companies’ competitiveness in a business thatis driven by turbulent market conditions and customers’ everincreasingdemands. This paper highlights the importance of tacitknowledge sharing in construction, explores the challenges andopportunities to efficiently share tacit knowledge, and based on theliterature review identifies some critical factors that influence tacitknowledge in construction. It is argued that employees’ knowledgesharing (learning behaviours are influenced by work practices thatare borne by respective organisational behaviours. Organisational,cultural, and project characteristics that facilitate knowledgesharing among construction employees are explored and thepractices that influence the construction employee behaviour insharing tacit knowledge are highlighted.

Multilevel factors influencing preterm birth in an urban setting

Directory of Open Access Journals (Sweden)

Saba W. Masho

2014-01-01

Full Text Available Racial disparity in preterm is a major problem in the US. Although significant strides have been made in identifying some of the risk factors, the complexities between community and individual factors are not understood. This study examines the influence of individual and community level factors affecting preterm birth among Black and White women in an urban setting. A 10-year live birth registry dataset from a mid-sized, racially diverse city was analyzed (N = 30,591. Data were geocoded and merged with block group level Census data. Five hierarchical models were examined using PROC GLIMMIX. Education, illicit drug use, pregnancy complications, previous preterm birth, paternal presence, inadequate and adequate plus prenatal care, and poverty were associated with preterm births in both Blacks and Whites. In Black women, increasing maternal age, maternal smoking, and a previous infant death were significant predictors of preterm births, which was not the case for White women. Residing in medium or high poverty neighborhoods resulted in 19% and 28% higher odds, respectively, of preterm birth for Black women. In addition to individual level factors, neighborhood poverty is an important risk factor influencing preterm birth. It is essential to engage multisectoral agencies in addressing factors influencing preterm birth.

Factors influencing purchase intention towards consumer-to-consumer e-commerce

OpenAIRE

Muhammad Dachyar; Liska Banjarnahor

2017-01-01

Purpose: This study explores factors that influence consumer’s purchase intention at three consumer-to-consumer (C2C) e-commerce companies in Indonesia. Design/methodology: 5 Expert opinions are used to determine the indicators of each factor and the Structural Equation Modelling (SEM) method is used to analyze the empirical data of 400 respondents for each company. Findings: It is found different significant factors that influence customer’s purchase intention in each compa...

Operation of flooded wells by the gas-lift method

Energy Technology Data Exchange (ETDEWEB)

Li, G S; Kabirov, M M; Nigay, Yu V

1983-01-01

A study is made of the factors which influence the effectiveness of operation of the gas-lift lifter during progressive flooding of a well. The law governing the change in its efficiency under the given conditions is also examined.

Assessment of cleaning efficiency of the polydisperse gas flow in double-flow dedusting system

Directory of Open Access Journals (Sweden)

O.G. Butenko

2016-05-01

Full Text Available One of priority problems of nature protection activity at the industrial enterprises is upgrading the gas emissions cleaning of polydispersed dust. To solve the problem of catching of small fraction dust the double-flow dedusting system has been offered. Aim: The aim of the work is to determine the dependency type of the cleaning efficiency of polydisperse gas flow on gas separation factor double-flow dedusting system. Materials and methods: The analysis of influence of gas separation factor in the dividing device of double-flow dedusting system on its efficiency is carried out. By drawing up the mass balance of system on gas and on the mass of dust the general dependence for breakthrough of the main catcher, characterizing overall effectiveness of system, is received. Results: It is shown that value of breakthrough factor of the main catcher depends on dimensionless efficiency factors of the equipment. The received general dependence of breakthrough factor on separation factor allows to define the optimum value of separation factor for any combined dedusting system.

Socio-Economic Factors Influencing Entrepreneurship Among ...

African Journals Online (AJOL)

Socio-Economic Factors Influencing Entrepreneurship Among Women In Fishing Communities In Ondo State, Nigeria. ... The study found that overall entrepreneurial rating of the study group is low, essential input can not be easily gotten in the area, the respondents has large household size thereby had a large dependents ...

Factors Influencing Donor Partnership Effectiveness | IDRC ...

International Development Research Centre (IDRC) Digital Library (Canada)

2010-11-03

Nov 3, 2010 ... A two-dimensional tool probing eight factors that influence partnership performance was developed, and used in conjunction with a Partnering Process Model, to guide the preparation of the case studies. The incorporation of the temporality dimension is quite novel and adds to the understanding and ...

Microbiologically Influenced Corrosion (MIC) in the Oil and Gas Industry

DEFF Research Database (Denmark)

Skovhus, Torben Lund; Eckert, Rickard

2015-01-01

Microbiologically influenced corrosion (MIC) is a serious corrosion threat that impacts the operating integrity and reliability of assets in the oil and gas, maritime, power generation, and other industries. Yet MIC is also commonly misunderstood, leading to ineffective mitigation programs, wasted...... and implement improved mitigation strategies and thereby reduce operating risk. Our experts provide guidance in applying the latest state-of-the-art molecular microbiological methods (MMM) and industry standards to properly diagnose MIC in operating assets and on failed components. With this understanding, MIC...... can be effectively addressed as part of the overall Corrosion Management System (CMS)....

Community Factors Influencing Birth Spacing among Married ...

African Journals Online (AJOL)

AJRH Managing Editor

level factors on birth spacing behaviour in Uganda and Zimbabwe, to ... environments as potential influences on birth spacing ..... health: multivariable cross-country analysis, MACRO ... Equity monitoring for social marketing: Use of wealth.

Factors Influencing Adoption of Cocoa Technologies Disseminated ...

African Journals Online (AJOL)

Factors Influencing Adoption of Cocoa Technologies Disseminated by Olam Organisation in ... Journal of Agricultural Research and Development ... level, household size, no of farm family assisting on the farm, management system adopted, ...

Habitat factors influencing the distribution of Cymbopogon validus in ...

African Journals Online (AJOL)

Habitat factors influencing the distribution of Cymbopogon validus in Mkambati Game Reserve, Transkei. ... disturbance; game reserve; grassland; grasslands; habitat conditions; habitat factors; mkambati game ... AJOL African Journals Online.

Factors that influence household and individual clothing expenditure ...

African Journals Online (AJOL)

S Blignaut

Contributing factors are the growth of low-priced apparel ... determine which factors influence household and individual ... explicitly deals with this concept. .... The income elasticity for clothing for the two-parent ..... Nelson (1989) found that mothers with less than a .... fashion consciousness and style preferences should.

The influence of gas-to-particle conversion on measurements of ammonia exchange over forest

NARCIS (Netherlands)

Oss, R. van; Duyzer, J.; Wyers, P.

1998-01-01

Measurements of vertical gradients of ammonium nitrate aerosol and NH3 are used together with HNO3 concentrations to study the influence of gas-to-particle conversion (gtpc) on surface exchange processes above a forest. A numerical model of surface exchange, in which a description of gtpc was

Factors influencing internal color of cooked meats.

Science.gov (United States)

Suman, Surendranath P; Nair, Mahesh N; Joseph, Poulson; Hunt, Melvin C

2016-10-01

This manuscript overviews the pertinent research on internal color of uncured cooked meats, biochemical processes involved in meat cookery, and fundamental mechanisms governing myoglobin thermal stability. Heat-induced denaturation of myoglobin, responsible for the characteristic dull-brown color of cooked meats, is influenced by a multitude of endogenous (i.e., pH, muscle source, species, redox state) and exogenous (i.e., packaging, ingredients, storage) factors. The interactions between these factors critically influence the internal cooked color and can confuse the consumers, who often perceive cooked color to be a reliable indicator for doneness and safety. While certain phenomena in cooked meat color are cosmetic in nature, others can mislead consumers and result in foodborne illnesses. Research in meat color suggests that processing technologies and cooking practices in industry as well as households influence the internal cooked color. Additionally, the guidelines of many international public health and regulatory authorities recommend using meat thermometers to determine safe cooking endpoint temperature and to ensure product safety. Copyright © 2016 Elsevier Ltd. All rights reserved.

Influence of an Optimized Thermoelectric Generator on the Back Pressure of the Subsequent Exhaust Gas System of a Vehicle

Science.gov (United States)

Kühn, Roland; Koeppen, Olaf; Kitte, Jens

2014-06-01

Numerous research projects in automotive engineering focus on the industrialization of the thermoelectric generator (TEG). The development and the implementation of thermoelectric systems into the vehicle environment are commonly supported by virtual design activities. In this paper a customized simulation architecture is presented that includes almost all vehicle parts which are influenced by the TEG (overall system simulation) but is nevertheless capable of real-time use. Moreover, an optimized planar TEG with minimum nominal power output of about 580 W and pressure loss at nominal conditions of 10 mbar, synthesized using the overall system simulation, and the overall system simulation itself are used to answer a generally neglected question: What influence does the position of a TEG have on the back pressure of the subsequent exhaust gas system of the vehicle? It is found that the influence of the TEG on the muffler is low, but the catalytic converter is strongly influenced. It is shown that the TEG can reduce the back pressure of an exhaust gas system so much that its overall back pressure is less than the back pressure of a standard exhaust gas system.

House owners' perceptions and factors influencing their choice of specific heating systems in Germany

International Nuclear Information System (INIS)

Decker, Thomas; Menrad, Klaus

2015-01-01

Against the background of global climate changes and several legal obligations, the target of this paper is to analyze the buying behavior of house owners in Germany with respect to heating systems and the main factors influencing choice when purchasing a specific heating system (e.g., oil heating or wood pellet heating). To investigate these issues, a Germany-wide written survey was conducted and the completed questionnaires of 775 respondents analyzed using multinomial logistic regression. Of 29 different variables influencing the purchase of a heating system, 12 statistically significant variables have been identified which characterize the owners of oil heating, a heat pump, gas heating and wood pellet heating. The membership of different ecological clusters primarily segregates the owners of a specific heating system, but the assessment of the different combustibles also plays a major role in this context. Suppliers of heating systems can use the results of this study to fine-tune their marketing strategies. With respect to policy issues only limited room for additional economic incentives can be identified to promote replacement of fossil-fuel based heating systems in favor of renewable ones. -- Highlights: •Current regulations support renewable heating systems insufficiently in Germany. •We developed a model to characterize the purchasers of different heating systems. •Ecological attitudes differentiate the purchasers of the different heating systems. •Economic reasons are mainly important for owners of gas and oil heating systems

Factors influencing selection of office furniture by corporations and universities

Science.gov (United States)

R. Bruce Anderson

1976-01-01

Evaluation of the factors that influence the selection of office furniture by large corporations and universities shows that quality, appearance, and purchase price have the most important influence on the purchase decision. The intended use of the furniture and the appearance of the furniture were the key factors in the purchase of wooden furniture.

The changing roles of natural gas aggregators - a Pan-Alberta Gas perspective

International Nuclear Information System (INIS)

Field, D. L.

1999-01-01

Traditional roles played by the various forms of natural gas marketing entities (margin-marketers, aggregators, brokers) and the factors that influence a producer of natural gas to market its gas through one or more of these entities are the subject of this paper. The author also reviews current developments in the natural gas marketing industry, focusing on changes from the perspective of the gas aggregator.The most significant change has been the trend by aggregators to branch out to provide a broad range of services that meet the needs of individual producers including gas management services for non-pool gas supply, transportation management, fixed and indexed pricing for both pool and non-pool supply, market based pricing, financial services for producers, short-term sales arrangements and streaming specific supply sources to specific markets. As aggregators continue to move away from offering only the traditional aggregator services, the distinction between aggregators and margin-marketers and the services they provide is becoming less distinct. The principal differences that will remain will be the differences in corporate structures and the shareholders who share the costs and receive the benefits generated by business activities of the aggregator. Another difference that will continue to exist is that margin-marketers offer North American-based services whereas aggregators focus on marketing natural gas primarily in Western Canada

Cerebrospinal Fluid Pressure: Revisiting Factors Influencing Optic Nerve Head Biomechanics

Science.gov (United States)

Hua, Yi; Voorhees, Andrew P.; Sigal, Ian A.

2018-01-01

Purpose To model the sensitivity of the optic nerve head (ONH) biomechanical environment to acute variations in IOP, cerebrospinal fluid pressure (CSFP), and central retinal artery blood pressure (BP). Methods We extended a previously published numerical model of the ONH to include 24 factors representing tissue anatomy and mechanical properties, all three pressures, and constraints on the optic nerve (CON). A total of 8340 models were studied to predict factor influences on 98 responses in a two-step process: a fractional factorial screening analysis to identify the 16 most influential factors, followed by a response surface methodology to predict factor effects in detail. Results The six most influential factors were, in order: IOP, CON, moduli of the sclera, lamina cribrosa (LC) and dura, and CSFP. IOP and CSFP affected different aspects of ONH biomechanics. The strongest influence of CSFP, more than twice that of IOP, was on the rotation of the peripapillary sclera. CSFP had similar influence on LC stretch and compression to moduli of sclera and LC. On some ONHs, CSFP caused large retrolamina deformations and subarachnoid expansion. CON had a strong influence on LC displacement. BP overall influence was 633 times smaller than that of IOP. Conclusions Models predict that IOP and CSFP are the top and sixth most influential factors on ONH biomechanics. Different IOP and CSFP effects suggest that translaminar pressure difference may not be a good parameter to predict biomechanics-related glaucomatous neuropathy. CON may drastically affect the responses relating to gross ONH geometry and should be determined experimentally. PMID:29332130

Flue gas recirculation to pellets burner

International Nuclear Information System (INIS)

Loefgren, B.E.; Blohm, T.

1999-05-01

The aim of this project has been to study the influence of flue gas recirculation on the combustion results. Primarily regarding the turbulence, stability and air surplus of the flame, but also the influence on environmental factors (CO and unburnt hydrocarbons). Also studied was the possibility of automatic control of the mixing of recirculating flue gases in the combustion process through the use of a λ-sond and O 2 control Project report from the program: Small scale combustion of biofuels. 9 figs, 8 tabs

Factors That Influence Technology Integration in the Classroom

Science.gov (United States)

Montgomery, Maureen C.

2017-01-01

Education is one area where the use of technology has had great impact on student learning. The integration of technology in teaching and learning can significantly influence the outcome of education in the classroom. However, there are a myriad of factors that influence technology integration in the classroom. The purpose of this study was to…

Factors influencing the, selection of state office furniture

Science.gov (United States)

R. Bruce Anderson; R. Bruce Anderson

1973-01-01

Evaluation of the factors influencing the selection of office furniture by nine state governments shows that quality and purchase price have the most important influence on the purchase decision. The intended use of the furniture and the purchasing regulations of the states were key f8CbrS in the use of wood furniture.

Relative importance of natural and anthropogenic factors influencing karst rocky desertification

Science.gov (United States)

Xu, Erqi; Zhang, Hongqi

2017-04-01

As the most severe ecological issue in southwest China, karst rocky desertification (KRD) has both threatened and constrained regional sustainable development. Comprehensively understanding the relationship between the evolution of KRD and relevant driving data would provide more information to combat KRD in such complex karst environments. Past studies have been limited in quantifying the relative importance of driving factors influencing fine-scale KRD evolution, and have also lacked insight into their interactive impacts. To address these issues, we have used geographical information system techniques and a geographical detector model to explore the spatial consistency of driving factors and their interactions in relation to the evolution of KRD. Changshun County in China was selected as a representative area for the study. Nine relevant driving factors, including both natural and anthropogenic factors, were studied in regard to their relationships with KRD transformation between 2000 and 2010. Our results demonstrate the relative importance of driving data in influencing the improvement and deterioration of KRD. Lithology, soil type and road influence are identified as the leading factors. Interestingly, to our study at least, there is no significant difference between the impacts of natural and anthropogenic factors influencing KRD improvement, and even natural factors have a higher impact on KRD deterioration. Factors were found to enhance the influence of each other for KRD transformation. In particular, the results show a non-linearly enhanced effect between driving factors, which significantly aggravates KRD. New information found in our study helps to effectively control and restore areas afflicted by KRD.

Investigation of the helium proportion influence on the Prandtl number value of gas mixtures

Directory of Open Access Journals (Sweden)

S. A. Burtsev

2014-01-01

Full Text Available The paper investigates an influence of helium fraction (light gases on the Prandtl number value for binary and more complex gas mixtures.It is shown that a low value of the Prandtl number (Pr-number results in decreasing a temperature recovery factor value and, respectively, in reducing a recovery temperature value on the wall (thermoinsulated wall temperature with the compressive gas flow bypassing it. This, in turn, allows us to increase efficiency of gasdynamic energy separation in Leontyev's tube.The paper conducts a numerical research of the influence of binary and more complex gas mixture composition on the Prandtl number value. It is shown that a mixture of two gases with small and large molecular weight allows us to produce a mixture with a lower value of the Prandtl number in comparison with the initial gases. Thus, the value of Prandtl number decreases by 1.5-3.2 times in comparison with values for pure components (the more a difference of molar mass of components, the stronger is a decrease.The technique to determine the Prandtl number value for mixtures of gases in the wide range of temperatures and pressure is developed. Its verification based on experimental data and results of numerical calculations of other authors is executed. It is shown that it allows correct calculation of binary and more complex mixtures of gasesFor the mixtures of inert gases it has been obtained that the minimum value of the Prandtl number is as follows: for helium - xenon mixtures (He-Xe makes 0.2-0.22, for helium - krypton mixtures (He-Kr – 0.3, for helium - argon mixes (He-Ar – 0.41.For helium mixture with carbon dioxide the minimum value of the Prandtl number makes about 0.4, for helium mixture with N2 nitrogen the minimum value of the Prandtl number is equal to 0.48, for helium-methane (CH4 - 0.5 and helium – oxygen (O2 – 0.46.This decrease is caused by the fact that the thermal capacity of mixture changes under the linear law in regard to the

Floating natural gas processing plants. Technical ideal or feasible technology

Energy Technology Data Exchange (ETDEWEB)

Backhaus, H

1977-04-01

Realizability of floating natural gas processing plants is decisively influenced by the economy of the system. Illustrated by the example of the natural gas product LPG (liquefied petroleum gas), a model cost calculation is carried out. It is demonstrated that the increase in the price level during the 1973/1974 energy crisis is an important factor for the realiability in terms of economy of such complicated technical systems. Another aspect which the model calculation revealed is that the economy of floating natural gas processing plants and storage systems can only be estimated in connection with other system components.

Effective water influx control in gas reservoir development: Problems and countermeasures

Directory of Open Access Journals (Sweden)

Xi Feng

2015-03-01

Full Text Available Because of the diversity of geological characteristics and the complexity of percolation rules, many problems are found ineffective water influx control in gas reservoir development. The problems mainly focus on how to understand water influx rules, to establish appropriate countermeasures, and to ensure the effectiveness of technical measures. It is hard to obtain a complete applicable understanding through the isolated analysis of an individual gas reservoir due to many factors such as actual gas reservoir development phase, research work, pertinence and timeliness of measures, and so on. Over the past four decades, the exploration, practicing and tracking research have been conducted on water control in gas reservoir development in the Sichuan Basin, and a series of comprehensive water control technologies were developed integrating advanced concepts, successful experiences, specific theories and mature technologies. Though the development of most water-drive gas reservoirs was significantly improved, water control effects were quite different. Based on this background, from the perspective of the early-phase requirements of water influx control, the influencing factors of a water influx activity, the dynamic analysis method of water influx performance, the optimizing strategy of a water control, and the water control experience of typical gas reservoirs, this paper analyzed the key problems of water control, evaluated the influencing factors of water control effect, explored the practical water control strategies, and proposed that it should be inappropriate to apply the previous water control technological model to actual work but the pertinence should be improved according to actual circumstances. The research results in the paper provide technical reference for the optimization of water-invasion gas reservoir development.

Assessment of Factors Influencing Beneficiary Participation in ...

African Journals Online (AJOL)

ISSN 0794-5698. Assessment of Factors Influencing Beneficiary Participation in Fadama II Project ... project implementation (80%) in the stages of project development. Women .... the project as they appeared to have more family burden to ...

Influence of nitrogen in the shielding gas on corrosion resistance of duplex stainless steel welds

Science.gov (United States)

Bhatt, R. B.; Kamat, H. S.; Ghosal, S. K.; de, P. K.

1999-10-01

The influence of nitrogen in shielding gas on the corrosion resistance of welds of a duplex stainless steel (grade U-50), obtained by gas tungsten arc (GTA) with filler wire, autogenous GTA (bead-on-plate), electron beam welding (EBW), and microplasma techniques, has been evaluated in chloride solutions at 30 °C. Pitting attack has been observed in GTA, electron beam welding, and microplasma welds when welding has been carried out using pure argon as the shielding gas. Gas tungsten arc welding with 5 to 10% nitrogen and 90 to 95% argon, as the shielding gas, has been found to result in an improved pitting corrosion resistance of the weldments of this steel. However, the resistance to pitting of autogenous welds (bead-on-plate) obtained in pure argon as the shielding gas has been observed to remain unaffected. Microscopic examination, electron probe microanalysis (EPMA), and x-ray diffraction studies have revealed that the presence of nitrogen in the shielding gas in the GTA welds not only modifies the microstructure and the austenite to ferrite ratio but also results in a nearly uniform distribution of the various alloying elements, for example, chromium, nickel, and molybdenum among the constitutent phases, which are responsible for improved resistance to pitting corrosion.

Psychosocial factors for influencing healthy aging in adults in Korea.

Science.gov (United States)

Han, KyungHun; Lee, YunJung; Gu, JaSung; Oh, Hee; Han, JongHee; Kim, KwuyBun

2015-03-07

Healthy aging includes physical, psychological, social, and spiritual well-being in later years. The purpose of this study is to identify the psychosocial factors influencing healthy aging and examining their socio-demographic characteristics. Perceived health status, depression, self-esteem, self-achievement, ego-integrity, participation in leisure activities, and loneliness were identified as influential factors in healthy aging. 171 Korean adults aged between 45 and 77 years-old participated in the study. Self-reporting questionnaires were used, followed by descriptive statistics and multiple regressions as inferential statistical analyses. There were significant differences between participants' general characteristics: age, education, religion, housing, hobby, and economic status. The factors related to healthy aging had positive correlation with perceived health status, self-esteem, self-achievements, and leisure activities, and negative correlation with depression and loneliness. The factors influencing healthy aging were depression, leisure activities, perceived health status, ego integrity, and self-achievements. These factors were able to explain 51.9%. According to the results, depression is the factor with the greatest influence on healthy aging. Perceived health status, ego integrity, self-achievement, self-esteem, participation of leisure activities were also influential on healthy aging as beneficial factors.

Alternative Administrative Certification: Socializing Factors Influencing Program Choice

Science.gov (United States)

Bickmore, Dana L.; Bickmore, Steven T.; Raines, Sarah

2013-01-01

This study used an organizational socialization lens to examine factors influencing participants' decision to pursue the principalship and choice to engage in an alternate administration certification program. Through an analysis of participant focus groups and interviews, factors emerged from the codes that were compared with dimensions of…

Gas sensing in 2D materials

Science.gov (United States)

Yang, Shengxue; Jiang, Chengbao; Wei, Su-huai

2017-06-01

Two-dimensional (2D) layered inorganic nanomaterials have attracted huge attention due to their unique electronic structures, as well as extraordinary physical and chemical properties for use in electronics, optoelectronics, spintronics, catalysts, energy generation and storage, and chemical sensors. Graphene and related layered inorganic analogues have shown great potential for gas-sensing applications because of their large specific surface areas and strong surface activities. This review aims to discuss the latest advancements in the 2D layered inorganic materials for gas sensors. We first elaborate the gas-sensing mechanisms and introduce various types of gas-sensing devices. Then, we describe the basic parameters and influence factors of the gas sensors to further enhance their performance. Moreover, we systematically present the current gas-sensing applications based on graphene, graphene oxide (GO), reduced graphene oxide (rGO), functionalized GO or rGO, transition metal dichalcogenides, layered III-VI semiconductors, layered metal oxides, phosphorene, hexagonal boron nitride, etc. Finally, we conclude the future prospects of these layered inorganic materials in gas-sensing applications.

Influence Factors of the Economic Development Level Across European Countries

OpenAIRE

Diana Ioana POPA

2016-01-01

The economic development level of a country refers to the measure of the progress in an economy that could be measured, especially through GDP or GDP per capita. The level of these indicators can be influenced by many factors as a large scale, from social and economical to environmental and government policies factors. The paper aims to investigate some of these influence factors of the economic development level, represented in this case by GDP per capita, across European countries in the...

LITERATURE REVIEW ON FACTORS INFLUENCING MILK PURCHASE BEHAVIOUR

Directory of Open Access Journals (Sweden)

Klaudia Kurajdova

2015-01-01

Full Text Available In today’s highly informed, competitive and saturated market, a key to success of any business depends on knowing consumer and his consumption patterns and recognizing and understanding factors influencing his decision-making for the purpose of developing an attractive offer of products, supporting services, communication means and other marketing tools that would fit like a glue to customer’s needs. Study of consumer behaviour belongs to a group of very wide and strong subjects of marketing attention and its examination requires ongoing approach. Milk, as one category of dairy products, belongs to the group of basic daily-consumed products characterized by relatively high purchase frequency. On the other hand, its production and consumption is experiencing certain negative trend in Slovakia what inevitably calls for a scientific attention and examination in order to reverse this unfavourable development having a negative impact on the milk companies in Slovakia. Therefore, we focus our attention on studying various factors influencing consumers when purchasing this specific product. Our research in this stage resulted in the compilation of literature review on factors influencing consumers when purchasing milk and determination of boundaries and guidelines for our future research activity

How modifiable factors influence parental decision-making about organ donation.

Science.gov (United States)

Luberda, Kamila; Cleaver, Karen

2017-11-07

A global shortage of organs from children and adults available for transplantation is compounded by the failure of next of kin to consent for organs to be donated after death. Non-modifiable and modifiable factors influence decision-making in this area. Modifiable factors are of interest when examining families' decision-making about the donation of organs from their deceased child. A scoping review was undertaken to determine how modifiable factors influence parental decision-making about organ donation. Thematic analysis identified two themes: interactions with healthcare professionals and pre-disposition to organ donation. Satisfaction with experiences of hospital care, the information provided and the way it was communicated, as well as interactions pertaining to emotional support were all found to be modifiable factors that influenced decision making. Likewise, a predisposition to organ donation and knowing the deceased's wishes were associated with the consent decision. Nurses working in critical care environments need to be able to support parents during this difficult time. This article aims to raise awareness of modifiable factors that influence parental decision-making, highlighting their relevance for children's nursing practice. ©2017 RCN Publishing Company Ltd. All rights reserved. Not to be copied, transmitted or recorded in any way, in whole or part, without prior permission of the publishers.

Emergency department crowding: factors influencing flow.

Science.gov (United States)

Arkun, Alp; Briggs, William M; Patel, Sweha; Datillo, Paris A; Bove, Joseph; Birkhahn, Robert H

2010-02-01

THE OBJECTIVE OF THIS STUDY WAS TO EVALUATE THOSE FACTORS, BOTH INTRINSIC AND EXTRINSIC TO THE EMERGENCY DEPARTMENT (ED) THAT INFLUENCE TWO SPECIFIC COMPONENTS OF THROUGHPUT: "door-to-doctor" time and dwell time. We used a prospective observational study design to determine the variables that played a significant role in determining ED flow. All adult patients seen or waiting to be seen in the ED were observed at 8pm (Monday-Friday) during a three-month period. Variables measured included daily ED volume, patient acuity, staffing, ED occupancy, daily admissions, ED boarder volume, hospital volume, and intensive care unit volume. Both log-rank tests and time-to-wait (survival) proportional-hazard regression models were fitted to determine which variables were most significant in predicting "door-to-doctor" and dwell times, with full account of the censoring for some patients. We captured 1,543 patients during our study period, representing 27% of total daily volume. The ED operated at an average of 85% capacity (61-102%) with an average of 27% boarding. Median "door-to-doctor" time was 1.8 hours, with the biggest influence being triage category, day of the week, and ED occupancy. Median dwell time was 5.5 hours with similar variable influences. The largest contributors to decreased patient flow through the ED at our institution were triage category, ED occupancy, and day of the week. Although the statistically significant factors influencing patient throughput at our institution involve problems with inflow, an increase in ED occupancy could be due to substantial outflow obstruction and may indicate the necessity for increased capacity both within the ED and hospital.

The influence of assist gas on magnetic properties of electrotechnical steel sheets cut with laser

International Nuclear Information System (INIS)

Gaworska-Koniarek, Dominika; Szubzda, Bronislaw; Wilczynski, Wieslaw; Drosik, Jerzy; Karas, Kazimierz

2011-01-01

The paper presents the influence of assist gas (air and nitrogen) during laser cutting on magnetization, magnetic permeability and loss characteristics of non-oriented electrical steels. The research was made on an non-oriented M330-50A grade electrical steels by means of single sheet tester. In order to enhance the effect of cutting and the same degradation zone on magnetic properties, strips with different width were achieved. Measurements results indicate that application of air as assist gas has more destructive effect on magnetic properties of electrical steels than nitrogen one.

The influence of assist gas on magnetic properties of electrotechnical steel sheets cut with laser

Science.gov (United States)

Gaworska-Koniarek, Dominika; Szubzda, Bronisław; Wilczyński, Wiesław; Drosik, Jerzy; Karaś, Kazimierz

2011-07-01

The paper presents the influence of assist gas (air and nitrogen) during laser cutting on magnetization, magnetic permeability and loss characteristics of non-oriented electrical steels. The research was made on an non-oriented M330-50A grade electrical steels by means of single sheet tester. In order to enhance the effect of cutting and the same degradation zone on magnetic properties, strips with different width were achieved. Measurements results indicate that application of air as assist gas has more destructive effect on magnetic properties of electrical steels than nitrogen one.

Factors influencing thermal tolerances of individual organisms

International Nuclear Information System (INIS)

Hutchison, V.H.

1976-01-01

The diversity of experimental methods and terminology employed by investigators to measure the effects of high temperatures on individual organisms, plus the often overlooked complexities of the holocoenotic environment, has often led to disconcerting conclusions. A plea is made for standardization of testing methods and for a wider appreciation of factors that may alter thermal tolerances. The influence of elevated temperature is grouped into three categories, lethal effects, controlling effects, and directive effects, all of which should be considered in assessing the impact of thermal effluent on organisms. In addition, the terminology (acclimation, acclimatization, adaptation, habituation, lethal temperature, critical thermal maximum, etc.) needs standardized definitions. The important factors influencing thermal effects on organisms include photoperiod, seasonal and daily cycles, geographic variation, diet, sex, breeding condition, age, life-cycle stage, salinity, chemicals, body water content and partitioning, oxygen supply, pH, innate and learned behavior, history of thermal exposure, sublethal exposure to limiting factors, and experimental methods. Examples of most of these are given to illustrate the role of temperature in the holocoenotic environmental complex of individual organisms

A new cyber security risk evaluation method for oil and gas SCADA based on factor state space

International Nuclear Information System (INIS)

Yang, Li; Cao, Xiedong; Li, Jie

2016-01-01

Based on comprehensive analysis of the structure and the potential safety problem of oil and gas SCADA(Supervisor control and data acquisition) network, aiming at the shortcomings of traditional evaluation methods, combining factor state space and fuzzy comprehensive evaluation method, a new network security risk evaluation method of oil and gas SCADA is proposed. First of all, formal description of factor state space and its complete mathematical definition were presented; secondly, factor fuzzy evaluation steps were discussed; then, using analytic hierarchy method, evaluation index system for oil and gas SCADA system was established, the index weights of all factors were determined by two-two comparisons; structure design of three layers in reasoning machine was completed. Experiments and tests show that the proposed method is accurate, reliable and practical. Research results provide the template and the new method for the other industries.

Factors influencing the pattern of malnutrition among acutely ill ...

African Journals Online (AJOL)

Factors influencing the pattern of malnutrition among acutely ill children presenting in ... height/length) measurements and z-scores calculated for the individual nutritional ... The factors associated with malnutrition included early introduction of ...

An analysis of headquarters location in the Canadian oil and gas sector

International Nuclear Information System (INIS)

Hirsch, K.T.

1993-04-01

Headquarters location theory identifies several factors which are expected to influence the location of corporate head offices. Some of these factors directly affect the costs of operation and the basic profitability of the company, such as the cost of office space, tax levels, availability of qualified labour, cost of labour, proximity to corporate activities, and agglomeration with other services and companies. Headquarters location theory is applied to Canada's energy sector. During the previous 27 years, concentration of energy company headquarters has shifted from Toronto to Calgary. A regression model tests the extent to which those factors identified in the literature appear to be statistically significant for the headquarters relocation experience in Canada's energy sector. The results of the tests suggest that certain factors do appear to significantly influence relocation decisions. These factors are agglomeration with other oil and gas companies, and relative proximity to oil and gas operations (which unexpectedly displayed a negative coefficient). The agglomeration factor was by far the most significant. 44 refs., 3 figs., 2 tabs

Factors Influencing the Adoption of Minimally Invasive Surgery ...

African Journals Online (AJOL)

Background: Cost is a major concern for delivery of minimally invasive surgical technologies due to the nature of resources required. It is unclear whether factors extrinsic to technology availability impact on this uptake. Objectives: To establish the influence of institutional, patient and surgeon-related factors in the adoption of ...

Factors Influencing Indonesian Internet Users Intention on Buying Books Online

Directory of Open Access Journals (Sweden)

Beatrik Messah

2003-09-01

Full Text Available The purpose of this research is to discover and analyse factors influencing Indonesian internet users intention on buying books online. Certain factors will be investigated are demographic, features, convenience, web design, and security. This research used questionaires to obtain data from the respondents. After the data collected, SPSS software is used to process the data with using Chi-Square test. The result found that features, convenience, and security factors of online bookstores and level of education, income, and occupation of the Indonesian Internet Users influence the people intention on buying books online. In the other hand, web design of the online bookstores and the age of the Indonesian internet users have no influence on their intention on buying books online.

Factors influencing eating attitudes in secondary-school girls in ...

African Journals Online (AJOL)

Family, especially maternal, factors play a role in determining eating attitudes. Peer and media (television) factors are not significantly influential. The findings provide preliminary data on factors that influence eating attrtudes in a group at risk for the development of eating disorders. The findings have implications for the ...

Iranian nurses self-perception -- factors influencing nursing image.

Science.gov (United States)

Varaei, Shokoh; Vaismoradi, Mojtaba; Jasper, Melanie; Faghihzadeh, Soghrat

2012-05-01

The purpose of this study was to describe the perspectives of Iranian nurses regarding factors influencing nursing image. Nursing image is closely tied to the nurse's role and identity, influencing clinical performance, job satisfaction and quality of care. Images of nursing and nurses are closely linked to the cultural context in which nursing is practised, hence, this study explores how Iranian nurses perceive the factors that influence their own image. A descriptive study using a survey design was conducted with 220 baccalaureate qualified nurses working in four teaching hospitals in an urban area of Iran. A Nursing Image Questionnaire was used and analysed using descriptive and inferential statistics. In the domains of 'characteristics required for entry to work', 'social role characteristics of nursing' and 'prestige, economic and social status, and self image' the nurses had negative images. 'Reward' and 'opportunity for creativity and originality' were factors that least influenced choosing nursing as a career. The presence of a nurse in the family and working in the hospital had the greatest impact on the establishment of nurses' nursing image. Improving the nursing profession's prestige and social position as well as providing the opportunity for creativity and originality in nursing practice will change the self-image of Iranian nurses, facilitating effective and lasting changes in nursing's image. Nurse managers are well-placed to influence nurses' perceptions of nursing's image. Given the finding that thinking about leaving a job positively correlates with holding a negative nursing image, nurse managers need to consider how they can work effectively with their staff to enhance morale and nurses' experience of their job. © 2012 Blackwell Publishing Ltd.

E-commerce factors influencing consumers‘ online shopping decision

OpenAIRE

Baubonienė, Živilė; Gulevičiūtė, Gintarė

2015-01-01

Purpose – The purpose of this paper is to look at the factors driving online shopping and to develop an understanding of the factors influencing the online shopping by the consumers. This is done by exploring the factors that encourage consumers to shop online through analysis of such advantages as security, fast delivery, comparable price, convenience, cheaper prices and a wider choice. At the same time, the research project reveals the factors that are discouraging for consumers and the ben...

Future Protein Supply and Demand: Strategies and Factors Influencing a Sustainable Equilibrium

Directory of Open Access Journals (Sweden)

Maeve Henchion

2017-07-01

Full Text Available A growing global population, combined with factors such as changing socio-demographics, will place increased pressure on the world’s resources to provide not only more but also different types of food. Increased demand for animal-based protein in particular is expected to have a negative environmental impact, generating greenhouse gas emissions, requiring more water and more land. Addressing this “perfect storm” will necessitate more sustainable production of existing sources of protein as well as alternative sources for direct human consumption. This paper outlines some potential demand scenarios and provides an overview of selected existing and novel protein sources in terms of their potential to sustainably deliver protein for the future, considering drivers and challenges relating to nutritional, environmental, and technological and market/consumer domains. It concludes that different factors influence the potential of existing and novel sources. Existing protein sources are primarily hindered by their negative environmental impacts with some concerns around health. However, they offer social and economic benefits, and have a high level of consumer acceptance. Furthermore, recent research emphasizes the role of livestock as part of the solution to greenhouse gas emissions, and indicates that animal-based protein has an important role as part of a sustainable diet and as a contributor to food security. Novel proteins require the development of new value chains, and attention to issues such as production costs, food safety, scalability and consumer acceptance. Furthermore, positive environmental impacts cannot be assumed with novel protein sources and care must be taken to ensure that comparisons between novel and existing protein sources are valid. Greater alignment of political forces, and the involvement of wider stakeholders in a governance role, as well as development/commercialization role, is required to address both sources of

Future Protein Supply and Demand: Strategies and Factors Influencing a Sustainable Equilibrium

Science.gov (United States)

Henchion, Maeve; Hayes, Maria; Mullen, Anne Maria; Fenelon, Mark; Tiwari, Brijesh

2017-01-01

A growing global population, combined with factors such as changing socio-demographics, will place increased pressure on the world’s resources to provide not only more but also different types of food. Increased demand for animal-based protein in particular is expected to have a negative environmental impact, generating greenhouse gas emissions, requiring more water and more land. Addressing this “perfect storm” will necessitate more sustainable production of existing sources of protein as well as alternative sources for direct human consumption. This paper outlines some potential demand scenarios and provides an overview of selected existing and novel protein sources in terms of their potential to sustainably deliver protein for the future, considering drivers and challenges relating to nutritional, environmental, and technological and market/consumer domains. It concludes that different factors influence the potential of existing and novel sources. Existing protein sources are primarily hindered by their negative environmental impacts with some concerns around health. However, they offer social and economic benefits, and have a high level of consumer acceptance. Furthermore, recent research emphasizes the role of livestock as part of the solution to greenhouse gas emissions, and indicates that animal-based protein has an important role as part of a sustainable diet and as a contributor to food security. Novel proteins require the development of new value chains, and attention to issues such as production costs, food safety, scalability and consumer acceptance. Furthermore, positive environmental impacts cannot be assumed with novel protein sources and care must be taken to ensure that comparisons between novel and existing protein sources are valid. Greater alignment of political forces, and the involvement of wider stakeholders in a governance role, as well as development/commercialization role, is required to address both sources of protein and ensure

Factors influencing job satisfaction and organizational commitment.

Science.gov (United States)

Watson, Liana M

2008-01-01

To assess the relationship between intrinsic and extrinsic motivational factors influencing job satisfaction and the perspective of frontline medical imaging staff in acute care health care facilities in the United States. The sample consisted of 359 registered radiologic technologists who were working as staff technologists in acute care health care facilities in the United States. The results of the study suggest that satisfaction with intrinsic and extrinsic motivators influences overall satisfaction with the work environment and job and commitment to the employer.

Influence of dissolved gas and temperature on the light yield of new liquid scintillators

CERN Document Server

Buontempo, S; Golovkin, S V; Martellotti, G; Medvedkov, A M; Penso, G; Soloviev, A S; Vasilchenko, V G

1999-01-01

Sixteen new liquid scintillators, emitting green light, were studied. They are based on four solvents combined with four dopants. The influence of different gas atmospheres was studied. In particular it was shown that by keeping these liquid scintillators in vacuum or in a neutral gas, the light yield increases up to 32~\\% at 20 $^{\\circ}$C and for the best solvent-dopant combinations. The dependance of the light yield on temperature was also studied for these scintillators. In the 20--60 $^{\\circ}$C interval, some exhibit a light yield variation of $\\sim$ 3 \\% which is smaller than that of the NE 102A plastic scintillator.

What Factors Influence Knowledge Sharing in Organizations?

DEFF Research Database (Denmark)

Razmerita, Liana; Kirchner, Kathrin; Nielsen, Pia

2016-01-01

factors drive employees’ participation and what factors hamper their participation in enterprise social media. Design/methodology/approach: Based on a literature review, a unified research model is derived integrating demographic, individual, organizational and technological factors that influence......Purpose: Enterprise social media platforms provide new ways of sharing knowledge and communicating within organizations to benefit from the social capital and valuable knowledge that employees have. Drawing on social dilemma and self-determination theory, the aim of the study is to understand what...... knowledge sharing framework helps to understand what factors impact engagement on social media. Furthermore the article suggests different types of interventions to overcome the social dilemma of knowledge sharing. Originality/value: The study contributes to an understanding of factors leading...

Influence of coating quality on the service life of land-based gas turbine blades

Energy Technology Data Exchange (ETDEWEB)

Cheruvu, N.S. [Southwest Research Institute, San Antonio (United States)

2007-06-15

The land-based gas turbine blades operate at severe operating conditions: higher metal temperatures and stresses, and severe duty cycles. Metallic coatings with or without a top ceramic coating have been used to protect the turbine blades. The durability of the coating system is one of the prime life-limiting factors of modem gas turbine blades. The quality of the coating plays a critical role on the coating life. This paper discusses the failure mechanisms of the coatings and describes how the quality of the coating affects the service life of a gas turbine blade. A few case studies are presented in the paper. (orig.)

Simulation of the influence of flue gas cleaning system on the energetic efficiency of a waste-to-energy plant

Energy Technology Data Exchange (ETDEWEB)

Grieco, E.; Poggio, A. [Politecnico di Torino, Corso Duca degli Abruzzi 24, Torino 10121 (Italy)

2009-09-15

Municipal solid waste incinerators are designed to enhance the electrical efficiency obtained by the plant as much as possible. For this reason strong integration between the flue gas cleaning system and the heat recovery system is required. To provide higher electrical efficiencies acid gas neutralization process has the major importance in flue gas cleaning system. At least four technologies are usually applied for acid gas removal: dry neutralization with Ca(OH){sub 2} or with NaHCO{sub 3}, semi-dry neutralization with milk of lime and wet scrubbing. Nowadays, wet scrubbers are rarely used as a result of the large amount of liquid effluents produced; wet scrubbing technology is often applied as a final treatment after a dry neutralization. Operating conditions of the plant were simulated by using Aspen Plus in order to investigate the influences of four different technologies on the electrical efficiency of the plant. The results of the simulations did not show a great influence of the gas cleaning system on the net electrical efficiency, as the difference between the most advantageous technology (neutralization with NaHCO{sub 3}) and the worst one, is about 1%. (author)

Review on Factors Influencing Physician Guideline Adherence in Cardiology.

Science.gov (United States)

Hoorn, C J G M; Crijns, H J G M; Dierick-van Daele, A T M; Dekker, L R C

2018-04-09

Cardiovascular disease is the most common cause of death in Western countries. Physician adherence to guidelines is often suboptimal, resulting in impaired patient outcome and prognosis. Multiple studies have been conducted to evaluate patterns and the influencing factors of patient adherence, but little is known about factors influencing physician guideline adherence. This review aims to identify factors influencing physician guideline adherence relevant to cardiology and to provide insights and suggestions for future improvement. Physician adherence was measured as adherence to standard local medical practice and applicable guidelines. Female gender and older age had a negative effect on physician guideline adherence. In addition, independent of the type of heart disease, physicians without cardiologic specialization were linked to physician noncompliance. Also, guideline adherence in primary care centers was at a lower level compared to secondary or tertiary care centers. The importance of guideline adherence increases as patients age, and complex diseases and comorbidity arise. Appropriate resources and interventions, taking important factors for nonadherence in account, are necessary to improve guideline adoption and adherence in every level of the chain. This in turn should improve patient outcome.

Factors influencing women\\'s decisions to purchase specific children ...

African Journals Online (AJOL)

Factors influencing women\\'s decisions to purchase specific children\\'s ... they had selected a children's multi-nutrient supplement with the intention of buying it. ... Price, performance and brand loyalty, affect and normative factors were most ...

Gas Transport Through Porous Strata from Underground Reaction Source; the Influence of the Gas Kind, Temperature and Transport-Pore Size

Czech Academy of Sciences Publication Activity Database

Šolcová, Olga; Soukup, Karel; Rogut, J.; Stanczyk, K.; Schneider, Petr

2009-01-01

Roč. 90, č. 12 (2009), s. 1495-1501 ISSN 0378-3820 Grant - others:RFCR(XE) CT/2007/00006 Institutional research plan: CEZ:AV0Z40720504 Keywords : underground coal gas ification * diffusion * permeation Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 2.321, year: 2009

Librarians' Perspectives on the Factors Influencing Research Data Management Programs

Science.gov (United States)

Faniel, Ixchel M.; Connaway, Lynn Silipigni

2018-01-01

This qualitative research study examines librarians' research data management (RDM) experiences, specifically the factors that influence their ability to support researchers' needs. Findings from interviews with 36 academic library professionals in the United States identify 5 factors of influence: (1) technical resources; (2) human resources; (3)…

Factors influencing societal response of nanotechnology: an expert stakeholder analysis

International Nuclear Information System (INIS)

Gupta, Nidhi; Fischer, Arnout R. H.; Lans, Ivo A. van der; Frewer, Lynn J.

2012-01-01

Nanotechnology can be described as an emerging technology and, as has been the case with other emerging technologies such as genetic modification, different socio-psychological factors will potentially influence societal responses to its development and application. These factors will play an important role in how nanotechnology is developed and commercialised. This article aims to identify expert opinion on factors influencing societal response to applications of nanotechnology. Structured interviews with experts on nanotechnology from North West Europe were conducted using repertory grid methodology in conjunction with generalized Procrustes analysis to examine the psychological constructs underlying societal uptake of 15 key applications of nanotechnology drawn from different areas (e.g. medicine, agriculture and environment, chemical, food, military, sports, and cosmetics). Based on expert judgement, the main factors influencing societal response to different applications of nanotechnology will be the extent to which applications are perceived to be beneficial, useful, and necessary, and how 'real' and physically close to the end-user these applications are perceived to be by the public.

Factors influencing societal response of nanotechnology: an expert stakeholder analysis

Science.gov (United States)

Gupta, Nidhi; Fischer, Arnout R. H.; van der Lans, Ivo A.; Frewer, Lynn J.

2012-05-01

Nanotechnology can be described as an emerging technology and, as has been the case with other emerging technologies such as genetic modification, different socio-psychological factors will potentially influence societal responses to its development and application. These factors will play an important role in how nanotechnology is developed and commercialised. This article aims to identify expert opinion on factors influencing societal response to applications of nanotechnology. Structured interviews with experts on nanotechnology from North West Europe were conducted using repertory grid methodology in conjunction with generalized Procrustes analysis to examine the psychological constructs underlying societal uptake of 15 key applications of nanotechnology drawn from different areas (e.g. medicine, agriculture and environment, chemical, food, military, sports, and cosmetics). Based on expert judgement, the main factors influencing societal response to different applications of nanotechnology will be the extent to which applications are perceived to be beneficial, useful, and necessary, and how 'real' and physically close to the end-user these applications are perceived to be by the public.

Emergency Department Crowding: Factors Influencing Flow

Directory of Open Access Journals (Sweden)

Arkun, Alp

2010-02-01

Full Text Available Background: The objective of this study was to evaluate those factors, both intrinsic and extrinsic to the emergency department (ED that influence two specific components of throughput: “door-to-doctor” time and dwell time.Methods: We used a prospective observational study design to determine the variables that played a significant role in determining ED flow. All adult patients seen or waiting to be seen in the ED were observed at 8pm (Monday-Friday during a three-month period. Variables measured included daily ED volume, patient acuity, staffing, ED occupancy, daily admissions, ED boarder volume, hospital volume, and intensive care unit volume. Both log-rank tests and time-to-wait (survival proportional-hazard regression models were fitted to determine which variables were most significant in predicting “door-to-doctor” and dwell times, with full account of the censoring for some patients.Results: We captured 1,543 patients during our study period, representing 27% of total daily volume. The ED operated at an average of 85% capacity (61-102% with an average of 27% boarding. Median “door-to-doctor” time was 1.8 hours, with the biggest influence being triage category, day of the week, and ED occupancy. Median dwell time was 5.5 hours with similar variable influences.Conclusion: The largest contributors to decreased patient flow through the ED at our institution were triage category, ED occupancy, and day of the week. Although the statistically significant factors influencing patient throughput at our institution involve problems with inflow, an increase in ED occupancy could be due to substantial outflow obstruction and may indicate the necessity for increased capacity both within the ED and hospital. [West J Emerg Med. 2010; 11(1:10-15

Analysis Influence of Mixing Gd2O3 in the Silicide Fuel Element to Core Excess Reactivity of RSG-GAS

International Nuclear Information System (INIS)

Susilo, Jati

2004-01-01

Gadolinium (Gd 2 O 3 ) is a burnable poison material mixed in the pin fuel element of the LWR core used to decrease core excess reactivity. In this research, analysis influence of mixing Gd 2 O 3 in the silicide fuel element to excess reactivity of the RSG-GAS core had been done. Equivalent cell of the equilibrium core developed by L.E.Strawbridge from Westing House Co. burn-up calculation has been done using SRAC-PIJ computer code achieve infinite multiplication factor (k x ). Value of Gd 2 O 3 concentration in the fuel element (pcm) showed by mass ratio of Gd 2 O 3 (gram) to that U 3 Si 2 (gram) times 10 5 , that is 0 pcm ∼ 100 pcm. From the calculation results analysis showed that Gd 2 O 3 concentration added should be considered. because a large number of Gd 2 O 3 will result in not achieving criticality at the Beginning Of Cycle. The maximum concentration of Gd 2 O 3 for RSG-GAS equilibrium fueled silicide 2.96 grU/cc is 80 pcm or 52.02 mgram/fuel plate. Maximum reduction of core excess reactivity due to mixing of Gd 2 O 3 in the RSG-GAS silicide fuels was around 1.502 %Δk/k, and hence not achieving the standard nominal excess reactivity for RSG-GAS core using high density of U 3 Si 2 -Al fuel. (author)

Diagnostics of the Factors Influencing the Export Activity of an Enterprise

Directory of Open Access Journals (Sweden)

Skrynkovskyy Ruslan M.

2017-09-01

Full Text Available The modern practice of doing business proves that a successful entrance of any enterprise to external (international markets depends on the level of its readiness for carrying out foreign economic activity. Under such circumstances, the process of targeted analysis and assessment of factors influencing the export activity of the enterprise is relevant, expedient and important. The aim of the article is the formation and development of theoretical and methodological bases for diagnosing factors influencing the export activity of an enterprise on the basis of theory and practice in the field of management and administration. It is found that the diagnostics should be understood as the process of identification, analysis and evaluation of influence (functional, dysfunctional of the factors (circumstances, conditions, etc. on the export activity of an enterprise in order to identify and solve problems (current, possible ones in the sphere of supply and implementation of specific actions (steps related to its entrance to external (international markets. It is determined that the key business indicators of the system for diagnosing the factors influencing the export activity of an enterprise are indicators reflecting the influence of the main factors on its export activity: level of fulfillment of obligations in terms of cost; level of conclusion of “expensive contracts”; share of renewed business contracts in the total number of contracts; level of satisfaction of claims; level of delivery variability. The prospect for further research in this scientific direction is developing a system of partial diagnostic goals of the integrated system of goals for conducting economic diagnostics of enterprises taking into account the diagnostics of factors influencing the export activity of an enterprise as a partial diagnostic goal.

Factors Influencing Medical Students' Choice of Specialty

OpenAIRE

Chang, Pei-Yeh; Hung, Chih-Young; Wang, Kuei-lng; Huang, Yuan-Huei; Chang, King-Jen

2006-01-01

Medical school graduates are the source of a country's physicians. Determining how the graduates of these schools select their areas of specialization is the key to achieving a balanced distribution of doctors among all specialties. The purposes of this study were to determine the factors that influence medical students' choice of medical specialty, and to derive the relative weight of each factor. Methods: We constructed a two-tiered analytic hierarchy process (AHP) model which was repres...

Computer Self-Efficacy and Factors Influencing E-Learning Effectiveness

Science.gov (United States)

Chien, Tien-Chen

2012-01-01

Purpose: The purpose of this study is to investigate the influences of system and instructor factors on e-learning effectiveness under the interactions of computer self-efficacy. In this study, the factors of the e-learning system are functionality, interaction, and response. The factors of the e-learning instructor are attitude, technical skills,…

CO2 storage in depleted gas reservoirs: A study on the effect of residual gas saturation

Directory of Open Access Journals (Sweden)

Arshad Raza

2018-03-01

Full Text Available Depleted gas reservoirs are recognized as the most promising candidate for carbon dioxide storage. Primary gas production followed by injection of carbon dioxide after depletion is the strategy adopted for secondary gas recovery and storage practices. This strategy, however, depends on the injection strategy, reservoir characteristics and operational parameters. There have been many studies to-date discussing critical factors influencing the storage performance in depleted gas reservoirs while little attention was given to the effect of residual gas. In this paper, an attempt was made to highlight the importance of residual gas on the capacity, injectivity, reservoir pressurization, and trapping mechanisms of storage sites through the use of numerical simulation. The results obtained indicated that the storage performance is proportionally linked to the amount of residual gas in the medium and reservoirs with low residual fluids are a better choice for storage purposes. Therefore, it would be wise to perform the secondary recovery before storage in order to have the least amount of residual gas in the medium. Although the results of this study are useful to screen depleted gas reservoirs for the storage purpose, more studies are required to confirm the finding presented in this paper.

Factors influencing woodlands of southwestern North Dakota

Science.gov (United States)

Michele M. Girard; Harold Goetz; Ardell J. Bjugstad

1987-01-01

Literature pertaining to woodlands of southwestern North Dakota is reviewed. Woodland species composition and distribution, and factors influencing woodland ecosystems such as climate, logging, fire, and grazing are described. Potential management and improvement techniques using vegetation and livestock manipulation have been suggested.

Factors that influence advertising design ideation | Usman ...

African Journals Online (AJOL)

Factors that influence advertising design ideation. ... PROMOTING ACCESS TO AFRICAN RESEARCH ... inevitably, more than ever before, on advertisement to take products to the doorsteps of potential consumers. Consequently, local and global corporations employ all manner of advertising media to achieve their end.

ICT Interventions for Girls: Factors Influencing ICT Career Intentions

Directory of Open Access Journals (Sweden)

Elena Gorbacheva

2014-11-01

Full Text Available Intervention programs aimed at promoting study and work opportunities in the Information and Communications Technology (ICT field to schoolgirls have been encouraged to combat a decline in the interest among girls to study ICT at school. The goal of our study is to investigate the influence of such interventions on schoolgirls’ intentions to choose a career in the ICT field by analysing comprehensive survey data (n = 3577, collected during four interventions in Australia, using the Partial Least Squares method. Our study is also aimed at identifying other factors influencing ICT career intentions. We found that the attitude towards interventions has an indirect influence on ICT career intentions by affecting interest in ICT. Our results also challenge several existing theoretical studies by showing that factors that had previously been suggested as influencers were found to have little or no impact in this study, these being same-sex education and computer usage.

Factors influencing the intention to watch online video advertising.

Science.gov (United States)

Lee, Joonghwa; Lee, Mira

2011-10-01

This study examines the factors influencing consumer intention to watch online video ads, by applying the theory of reasoned action. The attitude toward watching online video ads, the subjective norm, and prior frequency of watching online video ads positively influence the intention to watch online video ads. Further, beliefs held about entertainment and information outcomes from watching online video ads and subjective norm influence attitude toward watching these ads.

Factors Influencing Professional Help-Seeking for Suicidality.

Science.gov (United States)

Han, Jin; Batterham, Philip J; Calear, Alison L; Randall, Rebecca

2018-05-01

Evidence suggests that the majority of people with suicidality do not seek help. Little systematic evaluation of factors influencing professional help-seeking has been done. To systematically evaluate the factors that influence professional help-seeking for suicidality. Published quantitative and qualitative studies in Medline and PsycInfo databases were reviewed following PRISMA. In all, 55 relevant studies were identified. Of these, 15 studies examined professional help-seeking intentions for perceived suicidal ideation, among people with or without suicidality; 21 studies examined professional help-seeking behavior among people with suicidality; and 19 studies examined suicidal decedents' health services use. Several potential important barriers were identified including high self-reliance, lack of perceived need for treatment, and stigmatizing attitudes toward suicide, toward mental health issues, and toward seeking professional treatment. The presence of suicidality and mental health issues was found to generally decrease help-seeking intentions for perceived suicidal ideation while facilitating actual service use. Social support and informal support from family and friends also played an important role in professional help-seeking. Although the majority of the included studies were of sound quality, some of the factors identified in the review were assessed in relatively few studies, and most of the included studies were conducted in industrialized countries. Further quantitative and qualitative studies examining the potential important factors in broader community samples, especially in developing countries, are needed.

Prediction of natural gas consumption

International Nuclear Information System (INIS)

Zhang, R.L.; Walton, D.J.; Hoskins, W.D.

1993-01-01

Distributors of natural gas need to predict future consumption in order to purchase a sufficient supply on contract. Distributors that offer their customers equal payment plans need to predict the consumption of each customer 12 months in advance. Estimates of previous consumption are often used for months when meters are inaccessible, or bimonthly-read meters. Existing methods of predicting natural gas consumption, and a proposed new method for each local region are discussed. The proposed model distinguishes the consumption load factors from summer to other seasons by attempting to adjust them by introducing two parameters. The problem is then reduced to a quadratic programming problem. However, since it is not necessary to use both parameters simultaneously, the problem can be solved with a simple iterative procedure. Results show that the new model can improve the two-equation model to a certain scale. The adjustment to heat load factor can reduce the error of prediction markedly while that to base load factor influences the error marginally. 3 refs., 11 figs., 2 tabs

Factors influencing condom use among Nigerian undergraduates: A ...

African Journals Online (AJOL)

Factors influencing condom use among Nigerian undergraduates: A mixed method study. ... PROMOTING ACCESS TO AFRICAN RESEARCH ... group discussions) and quantitative (cross-sectional survey) methods were utilised for this study.

Factors influencing insulin secretion from encapsulated islets

NARCIS (Netherlands)

de Haan, BJ; Faas, MM; de Vos, P

2003-01-01

Adequate regulation of glucose levels by a microencapsulated pancreatic islet graft requires a minute-to-minute regulation of blood glucose. To design such a transplant, it is mandatory to have sufficient insight in factors influencing the kinetics of insulin secretion by encapsulated islets. The

A real-time assessment of factors influencing medication events.

Science.gov (United States)

Dollarhide, Adrian W; Rutledge, Thomas; Weinger, Matthew B; Fisher, Erin Stucky; Jain, Sonia; Wolfson, Tanya; Dresselhaus, Timothy R

2014-01-01

Reducing medical error is critical to improving the safety and quality of healthcare. Physician stress, fatigue, and excessive workload are performance-shaping factors (PSFs) that may influence medical events (actual administration errors and near misses), but direct relationships between these factors and patient safety have not been clearly defined. This study assessed the real-time influence of emotional stress, workload, and sleep deprivation on self-reported medication events by physicians in academic hospitals. During an 18-month study period, 185 physician participants working at four university-affiliated teaching hospitals reported medication events using a confidential reporting application on handheld computers. Emotional stress scores, perceived workload, patient case volume, clinical experience, total sleep, and demographic variables were also captured via the handheld computers. Medication event reports (n = 11) were then correlated with these demographic and PSFs. Medication events were associated with 36.1% higher perceived workload (p sleep (p = .10). These results confirm the effect of factors influencing medication events, and support attention to both provider and hospital environmental characteristics for improving patient safety. © 2013 National Association for Healthcare Quality.

Factors influencing the vulnerability of women to the risk of HIV ...

African Journals Online (AJOL)

Factors influencing the vulnerability of women to the risk of HIV-infection in rural villages in North West Province, South Africa. ... Gender and Behaviour ... This particular study found that there are a number of personal, proximal and distal factors that influence the vulnerability of women to HIV-infection in rural villages in ...

Factors Influencing the Yemeni Customers’ Intention to Adopt Takaful Products

Directory of Open Access Journals (Sweden)

Abdelghani Echchabi

2015-01-01

Full Text Available The purpose of this study is to examine the Yemeni customers’ intention to adopt Takaful products, and to explore the potential factors that influence their decision. This study applies SEM and one sample t-test to analyse the collected data. The results indicate that among the factors included in this study, only compatibility positively and significantly affects the adoption intention. This is the first study that addresses the adoption of Takaful products in Yemen and the factors that influence it. Furthermore, this study extends the Innovations Diffusion Theory (IDT by applying it to a different setting.

An empirical survey on factors influencing on packaging dairy products

Directory of Open Access Journals (Sweden)

Naser Azad

2013-07-01

Full Text Available Packaging plays an essential role on supplying different materials such as dairy products. The first thing people may look into when they purchase dairy products such as milk, cheese, etc. is associated with the packaging characteristics. This paper attempts to find important factors influencing on packaging dairy products. The study uses factor analysis to detect important factors based on a questionnaire consists of 28 questions in Likert scale, which is distributed among 200 regular employees of Pegah dairy producer. Cronbach alpha, Kaiser-Meyer-Olkin Measure of Sampling adequacy and Bartlett's test of Sphericity approximation Chi-Square are 0.81, 0.679 and 844.475, respectively and they are within acceptable limit. The study has determined five factors including infrastructure, awareness, design and communication as important factors influencing consumers.

Pakistani medical students' specialty preference and the influencing factors.

Science.gov (United States)

Rehman, Anis; Rehman, Tariq; Shaikh, Muhammad Ateeb; Yasmin, Haleema; Asif, Ammara; Kafil, Hina

2011-07-01

To elucidate the specialty preferences of Pakistani medical students and the factors which influence medical students to make the decision regarding which specialty to pursue. Both basic sciences and clinical students from four medical colleges of Pakistan, i.e., Dow Medical College, Sindh Medical College, Liaquat National Medical College and Muhammad Medical College, were included in the cross-sectional survey during the period of July 2008 to Jan' 2009. After ethical acceptance, data was collected using convenient sampling technique. The questionnaire covered the following demographic details: 13 common specialties and 15 influencing factors. Questionnaires included in the analysis were 771. Most students gave preference to surgery and its associated sub-specialties (50.3%) followed by internal medicine (26.8%), paediatrics (23.2%), dermatology (16.7%), gynaecology and obstetrics (16.7%), psychiatry (13.1%), radiology (10.8%), ENT (8.8%), anaesthesiology (8.7%), administrative medicine (8.6%), orthopaedics (8.2%), ophthalmology (7.5%), and laboratory medicine (6.1%). The highly considered factors (regarding specialties) chosen by 70% of the medical students were: applicable to respective personalities of the individuals, prestige and respect, international opportunities, and time commitment. Surgical-skills, job availability, financial rating, academic performance, and a role model were moderately influencing factors. Hospital environment, parents, general practice, peer-pressure and personal health were the least influential. This trend suggests competition in surgery and its sub-specialties along with internal medicine, paediatrics, dermatology, gynaecology and obstetrics. Specialty suited to personality, time commitment, prestige/respect and international opportunity, influenced more than 70% of the students.

Natural Gas Year 2014 and Short-Term Outlook First Estimates

International Nuclear Information System (INIS)

Hureau, Geoffroy; Lecarpentier, Armelle

2015-01-01

CEDIGAZ first estimates confirm the slowdown in the growth of gas supply seen in the past two years. CEDIGAZ expects a moderate 1.1% growth, on a par with the previous year. Net slowdown in China's gas demand growth (+ 8% in 2014, versus 16%/y over 2008-13). European natural gas consumption decline worsened (- 10%), largely due to mild weather. Strong decline in CIS' gas production and consumption amidst the Ukraine conflict. Surging US production (+ 5.7%), driven by shale gas. Significant decline in international pipeline trade (- 4.8%): Russian gas exports at the lowest in decade: -13% (- 9.7% to Europe, - 24% to the CIS); US net pipeline imports down 5% (effect of shale gas). 2014 showed a turnaround on the LNG market, after four years of market tightening: Additional LNG supply in Asia, combined with weather-related weak demand. Dramatic reduction of both European and Asian spot LNG prices in this context. Positive developments of US LNG projects (Cameron, Cove Point, Freeport all took FID...), which will likely delay other competing LNG projects (Russia, Canada, East Africa). In the short term, global gas demand growth is likely to remain moderate. The European market will continue to suffer from strong competition with coal and renewables + slowdown in Chinese gas demand growth. Uncertainties on the future evolution of the well-supplied LNG market and international prices until 2020 (demand in price-sensitive emerging markets...). Increasing pressure to cut subsidies in emerging markets in order to increase supply for a more viable development of natural gas in the long term. Recent structural and not temporary factors which could affect long term gas demand growth, such as the competition with other energy fuels (coal). Energy policies and general environmental regulations will thus be critical factors influencing natural gas demand (China). The Asian market will keep a major influence on the global LNG market

Factors influencing training transfer in nursing profession: a qualitative study.

Science.gov (United States)

Ma, Fang; Bai, Yangjing; Bai, Yangjuan; Ma, Weiguang; Yang, Xiangyu; Li, Jiping

2018-03-20

There is a growing recognition that training is not translated into performance and the 'transfer problem' exists in organization training today. Although factors contributing to training transfer have been identified in business and industry, the factors influencing training transfer in nursing profession remain less clear. A qualitative descriptive study was undertaken in two tertiary referral hospitals in China from February 2013 to September 2013. Purposeful sampling of 24 nursing staffs were interviewed about the factors influencing training transfer. Seven themes evolved from the analysis, categorized in 4 main domains, which described the factors influencing training transfer in nursing profession in trainee characteristics, training design, work environment and profession domain. The trainee characteristics domain included attitude and ability. The training design domain included training content and instruction method. The work environment domain included supports as facilitators and opposition as hindrance. The theme pertaining to the profession domain was professional development. Health care managers need to understand the factors influencing training transfer for maximizing the benefits of training. The right beliefs and values about training, the rigorous employee selection for training, the relevance of training content, training instructions facilitating learning and transfer, supports from peer, supervisors and the organization, organizational culture such as change, sharing, learning and support, and professional development are key to successful training transfer. Furthermore, managers should be aware of the opposition from co-workers and find ways to prevent it.

Factors influencing antibiotic prescribing in long-term care facilities: a qualitative in-depth study.

Science.gov (United States)

van Buul, Laura W; van der Steen, Jenny T; Doncker, Sarah M M M; Achterberg, Wilco P; Schellevis, François G; Veenhuizen, Ruth B; Hertogh, Cees M P M

2014-12-16

Insight into factors that influence antibiotic prescribing is crucial when developing interventions aimed at a more rational use of antibiotics. We examined factors that influence antibiotic prescribing in long-term care facilities, and present a conceptual model that integrates these factors. Semi-structured qualitative interviews were conducted with physicians (n = 13) and nursing staff (n = 13) in five nursing homes and two residential care homes in the central-west region of the Netherlands. An iterative analysis was applied to interviews with physicians to identify and categorize factors that influence antibiotic prescribing, and to integrate these into a conceptual model. This conceptual model was triangulated with the perspectives of nursing staff. The analysis resulted in the identification of six categories of factors that can influence the antibiotic prescribing decision: the clinical situation, advance care plans, utilization of diagnostic resources, physicians' perceived risks, influence of others, and influence of the environment. Each category comprises several factors that may influence the decision to prescribe or not prescribe antibiotics directly (e.g. pressure of patients' family leading to antibiotic prescribing) or indirectly via influence on other factors (e.g. unfamiliarity with patients resulting in a higher physician perceived risk of non-treatment, in turn resulting in a higher tendency to prescribe antibiotics). Our interview study shows that several non-rational factors may affect antibiotic prescribing decision making in long-term care facilities, suggesting opportunities to reduce inappropriate antibiotic use. We developed a conceptual model that integrates the identified categories of influencing factors and shows the relationships between those categories. This model may be used as a practical tool in long-term care facilities to identify local factors potentially leading to inappropriate prescribing, and to subsequently

Factors influencing the adoption of mobile financial services in the ...

African Journals Online (AJOL)

Factors influencing the adoption of mobile financial services in the unbanked population. ... Inkanyiso: Journal of Humanities and Social Sciences ... the influences of the adoption behaviour at different level of market maturity and points of time.

Genetic and environmental factors influencing the Placental Growth Factor (PGF variation in two populations.

Directory of Open Access Journals (Sweden)

Rossella Sorice

Full Text Available Placental Growth Factor (PGF is a key molecule in angiogenesis. Several studies have revealed an important role of PGF primarily in pathological conditions (e.g.: ischaemia, tumour formation, cardiovascular diseases and inflammatory processes suggesting its use as a potential therapeutic agent. However, to date, no information is available regarding the genetics of PGF variability. Furthermore, even though the effect of environmental factors (e.g.: cigarette smoking on angiogenesis has been explored, no data on the influence of these factors on PGF levels have been reported so far. Here we have first investigated PGF variability in two cohorts focusing on non-genetic risk factors: a study sample from two isolated villages in the Cilento region, South Italy (N=871 and a replication sample from the general Danish population (N=1,812. A significant difference in PGF mean levels was found between the two cohorts. However, in both samples, we observed a strong correlation of PGF levels with ageing and sex, men displaying PGF levels significantly higher than women. Interestingly, smoking was also found to influence the trait in the two populations, although differently. We have then focused on genetic risk factors. The association between five single nucleotide polymorphisms (SNPs located in the PGF gene and the plasma levels of the protein was investigated. Two polymorphisms (rs11850328 and rs2268614 were associated with the PGF plasma levels in the Cilento sample and these associations were strongly replicated in the Danish sample. These results, for the first time, support the hypothesis of the presence of genetic and environmental factors influencing PGF plasma variability.

471 socio-economic factors influencing agricultural radio

African Journals Online (AJOL)

Osondu

The study examined socio economic factors influencing agricultural radio programme FILIN. MAINOMA in ... statistics such as, Pearson Product Moment Correlation Coefficient (PPMC) and Chi-Square analysis. (χ. 2). .... of fish farmers association while one third. (22.22%) ... problems of language barrier and 6.00% of the.

Investigating different factors influencing on brand equity

Directory of Open Access Journals (Sweden)

Afsane Zamanimoghadam

2014-07-01

Full Text Available The purpose of this paper is to determine and prioritize factors influencing on brand equity in consumer’s point of view for a case study of Samsung appliance consumers in city of Tehran, Iran. The study investigates the effects of four factors in terms of the customer's perspective, price, advertisement, family and brand image, by dimensions of brand equity, perceived quality, brand awareness, brand association, brand loyalty, on brand equity. The research method is based on a descriptive-survey research. The questionnaire includes Samsung consumers in city of Tehran, Iran. To test the hypotheses, SPSS and LISREL software packages are used. For data analysis, descriptive statistics and inferential statistical tests including structural equation modeling and path analysis are used. The results of the survey have indicated that family and brand image influence positively on brand equity but the effects of advertisement and price on brand equity were not confirmed.

Factors that influence women's dispositions toward science

Science.gov (United States)

Atria, Catherine Graczyk

Females have been underrepresented in the study of science and science careers for decades although advancements have been made in closing this gender gap, the gap persists particularly in the physical sciences. Variables which influence a woman's desire to pursue and maintain a science course of study and career must be discovered. The United States lags behind other industrialized countries in the fields of science, math, and engineering. Females comprise an estimated half of the population; their potential contributions cannot be ignored or overlooked. This retrospective research study explores the personal experiences of ten women enrolled in science majors, with science related career plans. The goal of this study is to describe the factors that influence the participants' interest in science. The findings, the effect of science coursework, science teachers' personality and manner, other influential educational personnel, role models and mentors, external influences exclusive of school, parental influence, locus of control and positive attitudes toward science confirm what other researchers have found.

Analysis on influencing factors of clinical teachers’ job satisfaction by structural equation model

Directory of Open Access Journals (Sweden)

Haiyi Jia

2017-02-01

Full Text Available [Research objective] Analyze the influencing factors of clinical teachers’ job satisfaction. [Research method] The ERG theory was used as the framework to design the questionnaires. Data were analyzed by structural equation model for investigating the influencing factors. [Research result] The modified model shows that factors of existence needs and growth needs have direct influence on the job satisfaction of clinical teachers, the influence coefficients are 0.540 and 0.380. The three influencing factors have positive effects on each other, and the correlation coefficients are 0.620, 0.400 and 0.330 respectively. [Research conclusion] Relevant departments should take active measures to improve job satisfaction of clinical teachers from two aspects: existence needs and growth needs, and to improve their work enthusiasm and teaching quality.

Factors influencing societal response of nanotechnology: an expert stakeholder analysis

Energy Technology Data Exchange (ETDEWEB)

Gupta, Nidhi, E-mail: nidhi.gupta@wur.nl; Fischer, Arnout R. H., E-mail: arnout.fischer@wur.nl; Lans, Ivo A. van der, E-mail: Ivo.vanderLans@wur.nl [Wageningen University, Marketing and Consumer Behaviour Group (Netherlands); Frewer, Lynn J., E-mail: lynn.frewer@newcastle.ac.uk [Newcastle University, School of Agriculture, Food and Rural Development (United Kingdom)

2012-05-15

Nanotechnology can be described as an emerging technology and, as has been the case with other emerging technologies such as genetic modification, different socio-psychological factors will potentially influence societal responses to its development and application. These factors will play an important role in how nanotechnology is developed and commercialised. This article aims to identify expert opinion on factors influencing societal response to applications of nanotechnology. Structured interviews with experts on nanotechnology from North West Europe were conducted using repertory grid methodology in conjunction with generalized Procrustes analysis to examine the psychological constructs underlying societal uptake of 15 key applications of nanotechnology drawn from different areas (e.g. medicine, agriculture and environment, chemical, food, military, sports, and cosmetics). Based on expert judgement, the main factors influencing societal response to different applications of nanotechnology will be the extent to which applications are perceived to be beneficial, useful, and necessary, and how 'real' and physically close to the end-user these applications are perceived to be by the public.

Factors influencing post-traumatic stress in Korean forensic science investigators.

Science.gov (United States)

Yoo, Yang-Sook; Cho, Ok-Hee; Cha, Kyeong-Sook; Boo, Yun-Jeong

2013-09-01

The aim of this study was to understand factors that influence post-traumatic stress (PTS) in Korean forensic science investigators. A total of 111 forensic science investigators were recruited in Korea. PTS was measured using the tool modified by Choi (2001) from the original developed by Foa, Riggs, Dancu, and Rothbaum (1993) based on DSM-IV. Factors influencing PTS included demographic and job-related characteristics, emotional intelligence, and death anxiety. PTS scores were positively correlated with personality type, fatigue from work, and death anxiety. PTS scores were negatively correlated with length of career as a forensic science investigator and emotional intelligence. The factors that had the greatest influence on PTS were death anxiety, years spent as a forensic science investigator, personality type, emotional intelligence, fatigue, and homicide experience. The explanatory power of these six factors was 44.0%. Therefore, it is necessary to regularly evaluate the mental health of those who are vulnerable to PTS. Based on these results, various interventions could be implemented for promoting overall health of the forensic science investigators. Copyright © 2013. Published by Elsevier B.V.

Over all separation factors for stable isotopes by gas centrifuge

International Nuclear Information System (INIS)

Chuntong Ying; Nie Yuguang; Zeng Shi; Shang Xiuyong; Wood, Houston G.

1999-01-01

The separation factor for the elements with molar wight differences, γ 0 , is an important characteristic parameter for separation of varied isotopes. Besides the dependence on construction parameters of the gas centrifuge it depends on many variables. Some of them are operation conditions, such as feeding flow rate F, pressure at wall p w , temperature T 0 and distribution temperature on the wall and others. Separation factor γ 0 depends on physical properties, such as molar weight M, viscosity μ, product of ρD, where ρ is density of working media and D is its diffusion coefficient. It was taken four examples: UF 6 , WF 6 , OsO 4 and Xe [ru

Factors Potentially Influencing Student Acceptance of Biological Evolution

Science.gov (United States)

Wiles, Jason R.

This investigation explored scientific, religious, and otherwise nonscientific factors that may influence student acceptance of biological evolution and related concepts, how students perceived these factors to have influenced their levels of acceptance of evolution and changes therein, and what patterns arose among students' articulations of how their levels of acceptance of evolution may have changed. This exploration also measured the extent to which students' levels of acceptance changed following a treatment designed to address factors identified as potentially affecting student acceptance of evolution. Acceptance of evolution was measured using the MATE instrument (Rutledge and Warden, 1999; Rutledge and Sadler, 2007) among participants enrolled in a secondary-level academic program during the summer prior to their final year of high school and as they transitioned to the post-secondary level. Student acceptance of evolution was measured to be significantly higher than pre-treatment levels both immediately following and slightly over one year after treatment. Qualitative data from informal questionnaires, from formal course evaluations, and from semi-structured interviews of students engaged in secondary level education and former students at various stages of post-secondary education confirmed that the suspected factors were perceived by participants to have influenced their levels of acceptance of evolution. Furthermore, participant reports provided insight regarding the relative effects they perceived these factors to have had on their evolution acceptance levels. Additionally, many participants reported that their science teachers in public schools had avoided, omitted, or denigrated evolution during instruction, and several of these students expressed frustration regarding what they perceived to have been a lack of education of an important scientific principle. Finally, no students expressed feelings of being offended by having been taught about

Why neurology? Factors which influence career choice in neurology.

Science.gov (United States)

Albert, Dara V; Hoyle, Chad; Yin, Han; McCoyd, Matthew; Lukas, Rimas V

2016-01-01

To evaluate the factors which influence the decision to pursue a career in neurology. An anonymous survey was developed using a Likert scale to rate responses. The survey was sent to adult and child neurology faculty, residents and fellows, as well as medical students applying for neurology. Descriptive statistics were used to analyse the factors of influence. Respondents were subsequently categorized into pre-neurology trainees, neurology trainees, child neurologists and adult neurologists, and differences between the groups were analysed using Pearson's chi-square test. One hundred and thirty-three anonymous responses were received. The respondents were neurologists across all levels of training and practice. Across all respondents, the most common factor of high importance was intellectual content of specialty, challenging diagnostic problems, type of patient encountered and interest in helping people. Responses were similar across the groups; however, the earliest trainees cited interest in helping people as most important, while those in neurology training and beyond cite intellectual content of the specialty as most important. As trainees transition from their earliest levels of clinical experience into working as residents and faculty, there is a shift in the cited important factors. Lifestyle and financial factors seem to be the least motivating across all groups. Encouragement from peers, mentors, faculty and practicing physicians is considered high influences in a smaller number of neurologists. This may present an opportunity for practicing neurologists to make connections with medical students early in their education in an effort to encourage and mentor candidates.

Social Cultural Factors Influencing Women's Participation in Sports ...

African Journals Online (AJOL)

Social Cultural Factors Influencing Women's Participation in Sports as Perceived by Female Students of the University of Ilorin. ... sports competition while mass media should organize enlightenment programmes that will mitigate the ...

Factors influencing the usage of different types of malaria prevention ...

African Journals Online (AJOL)

Objective: To examine factors which influence the use of different types of malaria prevention ... risk areas, religion, education and income influenced ITN usage, whereas only age, malaria .... the uptake of IPTp given that the person would not.

Consumer's Online Shopping Influence Factors and Decision-Making Model

Science.gov (United States)

Yan, Xiangbin; Dai, Shiliang

Previous research on online consumer behavior has mostly been confined to the perceived risk which is used to explain those barriers for purchasing online. However, perceived benefit is another important factor which influences consumers’ decision when shopping online. As a result, an integrated consumer online shopping decision-making model is developed which contains three elements—Consumer, Product, and Web Site. This model proposed relative factors which influence the consumers’ intention during the online shopping progress, and divided them into two different dimensions—mentally level and material level. We tested those factors with surveys, from both online volunteers and offline paper surveys with more than 200 samples. With the help of SEM, the experimental results show that the proposed model and method can be used to analyze consumer’s online shopping decision-making process effectively.

[Analysis of influencing factors of snow hyperspectral polarized reflections].

Science.gov (United States)

Sun, Zhong-Qiu; Zhao, Yun-Sheng; Yan, Guo-Qian; Ning, Yan-Ling; Zhong, Gui-Xin

2010-02-01

Due to the need of snow monitoring and the impact of the global change on the snow, on the basis of the traditional research on snow, starting from the perspective of multi-angle polarized reflectance, we analyzed the influencing factors of snow from the incidence zenith angles, the detection zenith angles, the detection azimuth angles, polarized angles, the density of snow, the degree of pollution, and the background of the undersurface. It was found that these factors affected the spectral reflectance values of the snow, and the effect of some factors on the polarization hyperspectral reflectance observation is more evident than in the vertical observation. Among these influencing factors, the pollution of snow leads to an obvious change in the snow reflectance spectrum curve, while other factors have little effect on the shape of the snow reflectance spectrum curve and mainly impact the reflection ratio of the snow. Snow reflectance polarization information has not only important theoretical significance, but also wide application prospect, and provides new ideas and methods for the quantitative research on snow using the remote sensing technology.

Factors influencing the flavour of game meat: A review.

Science.gov (United States)

Neethling, J; Hoffman, L C; Muller, M

2016-03-01

Flavour is a very important attribute contributing to the sensory quality of meat and meat products. Although the sensory quality of meat includes orthonasal and retronasal aroma, taste, as well as appearance, juiciness and other textural attributes, the focus of this review is primarily on flavour. The influence of species, age, gender, muscle anatomical location, diet, harvesting conditions, ageing of meat, packaging and storage, as well as cooking method on the flavour of game meat are discussed. Very little research is available on the factors influencing the flavour of the meat derived from wild and free-living game species. The aim of this literature review is thus to discuss the key ante- and post-mortem factors that influence the flavour of game meat, with specific focus on wild and free-living South African game species. Copyright © 2015 Elsevier Ltd. All rights reserved.

Factors Influencing Renewable Energy Production & Supply - A Global Analysis

Science.gov (United States)

Ali, Anika; Saqlawi, Juman Al

2016-04-01

Renewable energy is one of the key technologies through which the energy needs of the future can be met in a sustainable and carbon-neutral manner. Increasing the share of renewable energy in the total energy mix of each country is therefore a critical need. While different countries have approached this in different ways, there are some common aspects which influence the pace and effectiveness of renewable energy incorporation. This presentation looks at data and information from 34 selected countries, analyses the patterns, compares the different parameters and identifies the common factors which positively influence renewable energy incorporation. The most successful countries are analysed for their renewable energy performance against their GDP, policy/regulatory initiatives in the field of renewables, landmass, climatic conditions and population to identify the most influencing factors to bring about positive change in renewable energy share.

The Influence Factors and Mechanism of Societal Risk Perception

Science.gov (United States)

Zheng, Rui; Shi, Kan; Li, Shu

Risk perception is one of important subjects in management psychology and cognitive psychology. It is of great value in the theory and practice to investigate the societal hazards that the public cares a lot especially in Socio-economic transition period. A survey including 30 hazards and 6 risk attributes was designed and distributed to about 2, 485 residents of 8 districts, Beijing. The major findings are listed as following: Firstly, a scale of societal risk perception was designed and 2 factors were identified (Dread Risk & Unknown Risk). Secondly, structural equation model was used to analyze the influence factors and mechanism of societal risk perception. Risk preference, government support and social justice could influence societal risk perception directly. Government support fully moderated the relationship between government trust and societal risk perception. Societal risk perception influenced life satisfaction, public policy preferences and social development belief.

Factors influencing HIV seroprevalence rate among pregnant ...

African Journals Online (AJOL)

Human immune deficiency virus (HIV) seroprevalence among pregnant women in Calabar was studied. The aims were to establish HIV seroprevalence rate and to identify factors which influence this rate in our pregnant women. HIV seroprevalence rate of 2.7% among antenatal women in Calabar was recorded with a ...

Factors Influencing Examination Malpractice in Secondary Schools ...

African Journals Online (AJOL)

The main purpose of this study was to investigate factors influencing examination malpractice in some selected secondary schools in Cross River State, Nigeria. A sample of one thousand two hundred (1200) students were selected across the three educational zones of Ogoja, Ikom and Calabar using stratified, random ...

Factors Influencing Smallholder Farmers Participation in IFAD ...

African Journals Online (AJOL)

USER

2015-02-02

Feb 2, 2015 ... This study assessed Factors Influencing smallholder farmers' ... percent of the population engaged in agricultural activities as a career and ... that the major source of income of the poor is agriculture and ... shown that farmers have different reasons for participation in agricultural ... 30 Dan gamau 534. 30.

Exploring Factors That Influence Quality Literature Circles

Science.gov (United States)

Young, Chase; Mohr, Kathleen A. J.

2018-01-01

Research indicates that literature circles are an authentic means for literacy development that students typically enjoy. To better understand the potential value and to add to the research base regarding literature circles, this study, involving 17 fourth graders, explores factors that may influence the quality of literature discussions,…

Socio-economic factors influencing cassava production in Kuje and ...

African Journals Online (AJOL)

This study examined socio-economic factors influencing output level of cassava production in Kuje and Abaji Area Councils of Federal Capital Territory, Abuja. The specific objectives were to:identify the socio-economic characteristics of sampled cassava farmers in the study area; determine the socio-economic factors ...

Identifying Factors Causing Variability in Greenhouse Gas (GHG) Fluxes in a Polygonal Tundra Landscape

Science.gov (United States)

Arora, B.; Wainwright, H. M.; Vaughn, L. S.; Curtis, J. B.; Torn, M. S.; Dafflon, B.; Hubbard, S. S.

2017-12-01

Greenhouse gas (GHG) flux variations in Arctic tundra environments are important to understand because of the vast amount of soil carbon stored in these regions and the potential of these regions to convert from a global carbon sink to a source under warmer conditions. Multiple factors potentially contribute to GHG flux variations observed in these environments, including snowmelt timing, growing season length, active layer thickness, water table variations, and temperature fluctuations. The objectives of this study are to investigate temporal variability in CO2 and CH4 fluxes at Barrow, AK over three successive growing seasons (2012-14) and to determine the factors influencing this variability using a novel entropy-based classification scheme. We analyzed soil, vegetation, and climate parameters as well as GHG fluxes at multiple locations within low-, flat- and high-centered polygons at Barrow, AK as part of the Next Generation Ecosystem Experiment (NGEE) Arctic project. Entropy results indicate that different environmental factors govern variability in GHG fluxes under different spatiotemporal settings. In particular, flat-centered polygons are more likely to become significant sources of CO2 during warm and dry years as opposed to high-centered polygons that contribute considerably to CO2 emissions during cold and wet years. In contrast, the highest CH4 emissions were always associated with low-centered polygons. Temporal variability in CO2 fluxes was primarily associated with factors affecting soil temperature and/or vegetation dynamics during early and late season periods. Temporal variability in CH4 fluxes was primarily associated with changes in vegetation cover and its covariability with primary controls such as seasonal thaw—rather than direct response to changes in soil moisture. Overall, entropy results document which factors became important under different spatiotemporal settings, thus providing clues concerning the manner in which ecosystem

Physico-chemical and biotic factors influencing microalgal seed ...

African Journals Online (AJOL)

Physico-chemical and biotic factors influencing microalgal seed culture propagation for inoculation of a ... African Journal of Biotechnology ... used to inoculate an open raceway pond for large scale biomass production for biodiesel production.

Factors influencing global antiretroviral procurement prices.

Science.gov (United States)

Wirtz, Veronika J; Forsythe, Steven; Valencia-Mendoza, Atanacio; Bautista-Arredondo, Sergio

2009-11-18

Antiretroviral medicines (ARVs) are one of the most costly parts of HIV/AIDS treatment. Many countries are struggling to provide universal access to ARVs for all people living with HIV and AIDS. Although substantial price reductions of ARVs have occurred, especially between 2002 and 2008, achieving sustainable access for the next several decades remains a major challenge for most low- and middle-income countries. The objectives of the present study were twofold: first, to analyze global ARV prices between 2005 and 2008 and associated factors, particularly procurement methods and key donor policies on ARV procurement efficiency; second, to discuss the options of procurement processes and policies that should be considered when implementing or reforming access to ARV programs. An ARV-medicines price-analysis was carried out using the Global Price Reporting Mechanism from the World Health Organization. For a selection of 12 ARVs, global median prices and price variation were calculated. Linear regression models for each ARV were used to identify factors that were associated with lower procurement prices. Logistic regression models were used to identify the characteristics of those countries which procure below the highest and lowest direct manufactured costs. Three key factors appear to have an influence on a country's ARV prices: (a) whether the product is generic or not; (b) the socioeconomic status of the country; (c) whether the country is a member of the Clinton HIV/AIDS Initiative. Factors which did not influence procurement below the highest direct manufactured costs were HIV prevalence, procurement volume, whether the country belongs to the least developed countries or a focus country of the United States President's Emergency Plan For AIDS Relief. One of the principal mechanisms that can help to lower prices for ARV over the next several decades is increasing procurement efficiency. Benchmarking prices could be one useful tool to achieve this.

Influencing factors on the visibility of surface distresses

Science.gov (United States)

Smęt, Wojciech; Skakuj, Marek

2018-05-01

A systematic and future-oriented maintenance management requires quality-assured data regarding the condition of the roadway. An important characteristic for assessing the condition of the road surface are cracks [1]. Experience has proven that the road surface temperature and residual humidity can influence the visibility of cracks. To investigate and quantify these influencing factors in more detail, the Federal Ministry of Transport and Digital Infrastructure has implemented a comprehensive research project [2], during which several measurement campaigns were carried out at different seasons and at different temperatures and humidity degrees of the road surface. The visibility of the cracks was assessed using the German approach ZTV ZEB-StB [3]. After evaluating the cracks, the data was synchronized and the network allocation of the geo-referenced raw data was realized. The relevant condition performance indicators were calculated subsequently. For each evaluation section of 100 meters length, the mean road surface temperature was calculated and, if available, the type and year of construction of the surface course was determined. The evaluated data was visualized to establish correlations between the data and the influencing factors. For the statistical analysis of the results, a total of six comparative scenarios were defined in which the influencing factors of road surface temperature and residual humidity were assessed. This paper documents the results of the research project. In order to obtain a uniform and comparable picture of the condition of the road surface over the years and thus to be able to observe the aging process of the road surface, the measurement campaigns are to be carried out under defined conditions. The research project included proposals for defining and further specifying the measurement conditions.

Influence of atmospheric factors on the rheumatic diseases

Energy Technology Data Exchange (ETDEWEB)

Latman, N S

1987-01-01

This paper reviews the influence of atmospheric factors on rheumatic diseases - rheumatoid arthritis, unspecified arthritis, gout, and systemic lupus erythematosis (SLE). The authors state that there appears to be ample evidence to conclude that various atmospheric factors do exert a significant impact on some people with various rheumatic diseases. The data are, however, crude relative to the authors general understanding. They recommend as a logical progression of research the determination of the effects of the meteorological/atmospheric factors of concern on the specific intrinsic mediators of inflammation.

Attitudes, norms and controls influencing lifestyle risk factor management in general practice

Directory of Open Access Journals (Sweden)

McKenzie Suzanne H

2009-08-01

Full Text Available Abstract Background With increasing rates of chronic disease associated with lifestyle behavioural risk factors, there is urgent need for intervention strategies in primary health care. Currently there is a gap in the knowledge of factors that influence the delivery of preventive strategies by General Practitioners (GPs around interventions for smoking, nutrition, alcohol consumption and physical activity (SNAP. This qualitative study explores the delivery of lifestyle behavioural risk factor screening and management by GPs within a 45–49 year old health check consultation. The aims of this research are to identify the influences affecting GPs' choosing to screen and choosing to manage SNAP lifestyle risk factors, as well as identify influences on screening and management when multiple SNAP factors exist. Methods A total of 29 audio-taped interviews were conducted with 15 GPs and one practice nurse over two stages. Transcripts from the interviews were thematically analysed, and a model of influencing factors on preventive care behaviour was developed using the Theory of Planned Behaviour as a structural framework. Results GPs felt that assessing smoking status was straightforward, however some found assessing alcohol intake only possible during a formal health check. Diet and physical activity were often inferred from appearance, only being assessed if the patient was overweight. The frequency and thoroughness of assessment were influenced by the GPs' personal interests and perceived congruence with their role, the level of risk to the patient, the capacity of the practice and availability of time. All GPs considered advising and educating patients part of their professional responsibility. However their attempts to motivate patients were influenced by perceptions of their own effectiveness, with smoking causing the most frustration. Active follow-up and referral of patients appeared to depend on the GPs' orientation to preventive care, the

Attitudes, norms and controls influencing lifestyle risk factor management in general practice.

Science.gov (United States)

Ampt, Amanda J; Amoroso, Cheryl; Harris, Mark F; McKenzie, Suzanne H; Rose, Vanessa K; Taggart, Jane R

2009-08-26

With increasing rates of chronic disease associated with lifestyle behavioural risk factors, there is urgent need for intervention strategies in primary health care. Currently there is a gap in the knowledge of factors that influence the delivery of preventive strategies by General Practitioners (GPs) around interventions for smoking, nutrition, alcohol consumption and physical activity (SNAP). This qualitative study explores the delivery of lifestyle behavioural risk factor screening and management by GPs within a 45-49 year old health check consultation. The aims of this research are to identify the influences affecting GPs' choosing to screen and choosing to manage SNAP lifestyle risk factors, as well as identify influences on screening and management when multiple SNAP factors exist. A total of 29 audio-taped interviews were conducted with 15 GPs and one practice nurse over two stages. Transcripts from the interviews were thematically analysed, and a model of influencing factors on preventive care behaviour was developed using the Theory of Planned Behaviour as a structural framework. GPs felt that assessing smoking status was straightforward, however some found assessing alcohol intake only possible during a formal health check. Diet and physical activity were often inferred from appearance, only being assessed if the patient was overweight. The frequency and thoroughness of assessment were influenced by the GPs' personal interests and perceived congruence with their role, the level of risk to the patient, the capacity of the practice and availability of time. All GPs considered advising and educating patients part of their professional responsibility. However their attempts to motivate patients were influenced by perceptions of their own effectiveness, with smoking causing the most frustration. Active follow-up and referral of patients appeared to depend on the GPs' orientation to preventive care, the patient's motivation, and cost and accessibility of

Motivational factors influencing nurses to undertake postgraduate hospital-based education.

Science.gov (United States)

Kinsella, Danny; Fry, Margaret; Zecchin, Alison

2018-05-01

Specialist postgraduate education improves patient health outcomes, and assists in meeting the emerging specialisation of nursing practice. The aim of this study was to investigate the motivational factors that influence nurses' engagement with hospital-based postgraduate education. The research design was descriptive and exploratory, using a survey method. The survey consisted of demographic details, the Participation Reasons Scale (PRS) and open-ended questions. Thirty-four participants (100%) completed the survey. Of the PRS extrinsic and intrinsic factors, Professional Improvement and Development (Factor 1) and Professional Service (Factor 2), both intrinsic factors, ranked the highest. Therefore, this study identified that intrinsic motivation factors influenced engagement with postgraduate specialty programs for early career nurses. These results highlight the importance of intrinsic motivation factors for a nursing workforce and how this can potentially drive behaviour and decision making. A better understanding of motivation factors across a nurse's career could lead to educational strategies that optimise postgraduate program engagement to better support healthcare delivery and a culture of lifelong learning. Copyright © 2018. Published by Elsevier Ltd.

Simulation of a heat pump system for total heat recovery from flue gas

International Nuclear Information System (INIS)

Wei, Maolin; Yuan, Weixing; Song, Zhijia; Fu, Lin; Zhang, Shigang

2015-01-01

This paper introduces an approach of using an open-cycle absorption heat pump (OAHP) for recovering waste heat from the flue gas of a gas boiler with a system model. And equivalent energy efficiency is used to evaluate two other heat recovery systems that integrate an electric compression heat pump (EHP) or an absorption heat pump (AHP) with a boiler. The key factors influencing the systems are evaluated. The OAHP system efficiency is improved by 11% compared to the base case. And the OAHP system is more efficient than the AHP or the EHP systems, especially when the solution mass flow rate is only a little less than the cold water mass flow rate. The energy efficiency comparison is supplemented with a simplified economic analysis. The results indicate that the OAHP system is the best choice for the current prices of electricity and natural gas in Beijing. - Highlights: • An OAHP system is analyzed to improve heat recovery from natural gas flue gas. • OAHP system models are presented and analyzed. • The key factors influencing the OAHP systems are analyzed. • The OAHP system is most efficient for most cases compared with other systems. • The OAHP system is more economic than other systems

Influence of the combustion chamber during the transient performance of gas turbines; Influencias da camara de combustao durante o transitorio de turbinas a gas

Energy Technology Data Exchange (ETDEWEB)

Cunha Alves, M.A. da [Centro Tecnico Aeroespacial, Sao Jose dos Campos, SP (Brazil). Inst. de Pesquisas e Desenvolvimento

1991-12-31

It has been realised that heat transfer and others secondary effects have an important influence on the transient performance of a gas turbine, but until very recently, modelling was carried out either assuming adiabatic conditions, or using expedient but unrealistic models to simulate these effects. This work describes the effects of combustion chamber heat storage and of dead time lag of the combustion process, during a gas turbine transient. These effects have been investigated and the analysis has indicated that these effects do not play an important role in the transient performance of the engine analysed, but in certain circumstances they may become important. (author). 5 refs., 4 figs.

Factors influencing cancer treatment decision-making by indigenous peoples: a systematic review.

Science.gov (United States)

Tranberg, Rona; Alexander, Susan; Hatcher, Deborah; Mackey, Sandra; Shahid, Shaouli; Holden, Lynda; Kwok, Cannas

2016-02-01

We aim to systematically review studies that identify factors influencing cancer treatment decision-making among indigenous peoples. Following the outline suggested by the Preferred Reporting Items for Systematic Review and Meta-analysis, a rigorous systematic review and meta-synthesis were conducted of factors that influence cancer treatment decision-making by indigenous peoples. A total of 733 articles were retrieved from eight databases and a manual search. After screening the titles and abstracts, the full text of 26 articles were critically appraised, resulting in five articles that met inclusion criteria for the review. Because the five articles to be reviewed were qualitative studies, the Critical Appraisal Skills Program toolkit was used to evaluate the methodological quality. A thematic synthesis was employed to identify common themes across the studies. Multiple socio-economic and cultural factors were identified that all had the potential to influence cancer treatment decision-making by indigenous people. These factors were distilled into four themes: spiritual beliefs, cultural influences, communication and existing healthcare systems and structures. Although existing research identified multiple factors influencing decision-making, this review identified that quality studies in this domain are scarce. There is scope for further investigation, both into decision-making factors and into the subsequent design of culturally appropriate programmes and services that meet the needs of indigenous peoples. Copyright © 2015 John Wiley & Sons, Ltd.

Factors influencing early stage healthcare-academia partnerships.

Science.gov (United States)

Uvhagen, Håkan; von Knorring, Mia; Hasson, Henna; Øvretveit, John; Hansson, Johan

2018-02-12

Purpose The purpose of this paper is to explore factors influencing early implementation and intermediate outcomes of a healthcare-academia partnership in a primary healthcare setting. Design/methodology/approach The Academic Primary Healthcare Network (APHN) initiative was launched in 2011 in Stockholm County, Sweden and included 201 primary healthcare centres. Semi-structured interviews were conducted in 2013-2014 with all coordinating managers ( n=8) and coordinators ( n=4). A strategic change model framework was used to collect and analyse data. Findings Several factors were identified to aid early implementation: assignment and guidelines that allowed flexibility; supportive management; dedicated staff; facilities that enabled APHN actions to be integrated into healthcare practice; and positive experiences from research and educational activities. Implementation was hindered by: discrepancies between objectives and resources; underspecified guidelines that trigger passivity; limited research and educational activities; a conflicting non-supportive reimbursement system; limited planning; and organisational fragmentation. Intermediate outcomes revealed that various actions, informed by the APHN assignment, were launched in all APHNs. Practical implications The findings can be rendered applicable by preparing stakeholders in healthcare services to optimise early implementation of healthcare-academia partnerships. Originality/value This study increases understanding of interactions between factors that influence early stage partnerships between healthcare services and academia in primary healthcare settings.

Mexican demand for US natural gas

International Nuclear Information System (INIS)

Kanter, M.A.; Kier, P.H.

1993-09-01

This study describes the Mexican natural gas industry as it exists today and the factors that have shaped the evolution of the industry in the past or that are expected to influence its progress; it also projects production and use of natural gas and estimates the market for exports of natural gas from the United States to Mexico. The study looks ahead to two periods, a near term (1993--1995) and an intermediate term (1996--2000). The bases for estimates under two scenarios are described. Under the conservative scenario, exports of natural gas from the United States would decrease from the 1992 level of 250 million cubic feet per day (MMCF/d), would return to that level by 1995, and would reach about 980 MMCF/D by 2000. Under the more optimistic scenario, exports would decrease in 1993 and would recover and rise to about 360 MMCF/D in 1995 and to 1,920 MMCF/D in 2000

Mexican demand for US natural gas

Energy Technology Data Exchange (ETDEWEB)

Kanter, M.A.; Kier, P.H.

1993-09-01

This study describes the Mexican natural gas industry as it exists today and the factors that have shaped the evolution of the industry in the past or that are expected to influence its progress; it also projects production and use of natural gas and estimates the market for exports of natural gas from the United States to Mexico. The study looks ahead to two periods, a near term (1993--1995) and an intermediate term (1996--2000). The bases for estimates under two scenarios are described. Under the conservative scenario, exports of natural gas from the United States would decrease from the 1992 level of 250 million cubic feet per day (MMCF/d), would return to that level by 1995, and would reach about 980 MMCF/D by 2000. Under the more optimistic scenario, exports would decrease in 1993 and would recover and rise to about 360 MMCF/D in 1995 and to 1,920 MMCF/D in 2000.

Important factors influencing the return to work after stroke.

Science.gov (United States)

Wang, Ying-Chih; Kapellusch, Jay; Garg, Arun

2014-01-01

As the field of rehabilitation shifts its focus towards improving functional capacity instead of managing disability, return to work (RTW) and return to the community emerge as key goals in a person's recovery from major disabling illness such as stroke. To compile important factors believed to influence RTW after a stroke. Based on a comprehensive literature review, we clustered similar factors and organized these factors based on the International Classification of Function, Disability and Health (ICF) framework: body functions or structure, activity participation, environmental factors and personal and psychosocial factors. Overall, stroke severity, as assessed by the degree of residual disability such as weakness, neurological deficit or impairments (speech, cognition, apraxia, agnosia), has been shown to be the most consistent negative predictor of RTW. Many factors such as the number of working years remaining until retirement, depression, medical history, and occupation need to be taken into consideration for stroke survivors, as they can influence RTW decision making. Stroke survivors who are flexible and realistic in their vocational goal and emotionally accept their disability appear more likely to return to work. There are many barriers to employment for stroke survivors ranging from physical and cognitive impairments to psychosocial and environmental factors.

Terahertz gas sensing based on a simple one-dimensional photonic crystal cavity with high-quality factors

DEFF Research Database (Denmark)

Chen, T.; Han, Z. H.; Liu, J. J.

2014-01-01

We report in this paper terahertz gas sensing using a simple 1D photonic crystal cavity. The resonant frequencies of the cavity depend linearly on the refractive index of the ambient gas, which can then be measured by monitoring the resonance shift. Although quite easy to manufacture, this cavity...... exhibits high-quality factors, facilitating the realization of high sensitivity in the gas refractive index sensing. In our experiment, 6% of the change of hydrogen concentration in air, which corresponds to a refractive index change of 1.4 x 10(-5), can be steadily detected, and different gas samples can...

Investigating important factors influencing purchasing from chains

Directory of Open Access Journals (Sweden)

Naser Azad

2012-04-01

Full Text Available In this paper, we survey important factors, influencing customers to buy more from one of well known food market operating in capital city of Iran named Shahrvand. The survey studies the effects of six factors including customer's perception, persuasive factors, brand, customers' expectations, product's characteristics and special features of store on attracting more customers. We have distributed questionnaire among 196 customers who regularly visit stores and analyzed details of the data. The results indicate that customers' perception is the most important item, which includes eight components. Years of experience is the most important item in our survey followed by impact of color and working hours. Diversity of services is another factor, which plays the most important role followed by quality of services. Next, fidelity and brand are other most important factors and the name of store and risk are in lower degree of importance.

Influence of breed and environmental factors on litter parameters of ...

African Journals Online (AJOL)

Influence of breed and environmental factors on litter parameters of rabbits ... There was a non-significant effect of season on litter site at birth, kits alive at birth and ... to rabbit reproduction as it influenced negatively more litter parameters than ...

Factors influencing e-Procurement adoption in the Nigerian building industry

Directory of Open Access Journals (Sweden)

Eziyi Offia Ibem

2016-12-01

Full Text Available Against the backdrop of increasing adoption of e-Procurement in supply chain management, there is a need for adequate knowledge of the factors that influence the decision by organizations in the building industry to use e-Procurement. This study aims to fill the knowledge gap through investigating the factors influencing e-Procurement adoption based on the data sourced in a questionnaire survey involving 213 organizations in the building industry. The survey was conducted between June and November 2015 in Nigeria. Descriptive statistics, factor and categorical regression analyses were used to analyze the data. The results show that the three most important factors influencing the adoption of e-Procurement amongst the participants, in order of importance, were: the benefits of e-Procurement in enhancing efficiency in project delivery; eliminating geographic barriers and effective communication among project team members. The 29 factors were investigated in seven different dimensions - the benefits of e-Procurement use; level of awareness on e-Procurement in construction; and the availability and cost of e-Procurement applications emerged as the three most significant predictors of e-Procurement adoption in the survey. The study concludes by identifying strategies that should be engaged in increasing the uptake and maximizing the benefits of e-Procurement in the Nigerian building industry.

Professionalism: the major factor influencing job satisfaction among Korean and Chinese nurses.

Science.gov (United States)

Hwang, J-I; Lou, F; Han, S S; Cao, F; Kim, W O; Li, P

2009-09-01

The nursing shortage has become an internationally important issue. Nurses' professionalism and job satisfaction have been recognized as strong factors influencing their turnover. As international interchanges in nursing education are growing between Korea and China, understanding the commonalities and differences in factors associated with job satisfaction is critical to improving nurses' job retention. To compare the factors influencing job satisfaction among Korean and Chinese nurses. A cross-sectional survey was conducted. The participants were comprised of 693 nurses at three general hospitals in Jinan, People's Republic of China and 593 nurses at two general hospitals in Seoul, Korea. A questionnaire was designed to measure the nurses' professionalism and job satisfaction. Stepwise multiple regression analysis was performed to identify factors related to job satisfaction. Professionalism was the common factor influencing job satisfaction in Korean and Chinese nurses. Professionalism was positively related to job satisfaction in both groups. Additional factors associated with job satisfaction were demographics and job characteristics such as age, job position and department of work, which were significant only in Korean nurses. Professionalism was the most important factor influencing job satisfaction in both Korean and Chinese nurses. Enhancing nursing professionalism is recommended as a common strategy to improve nurses' job retention across different healthcare systems.

Price trends of oil and gas. Influence from the development on the British gas market; Prisutsikter for olje og gass. Vil utviklingen paa det britiske gassmarked smitte?

Energy Technology Data Exchange (ETDEWEB)

Hansen, B.L.

1996-12-31

This paper focuses on the future prospects of oil and gas prices in Europe being influenced by the liberalized market in the United Kingdom. With reference to the Norwegian continental shelf, the market price of oil determines the price of gas because the oil production will be much higher than the production of gas for a long time. From 1998 onwards, a new natural gas pipeline will be operating between the United Kingdom and the Continent having a capacity of 20 billion Sm{sup 3} in both directions. The author gives at first a brief description of the continental market of to day, secondly, a discussion on how to liberalize such a market together with experience obtained in the United Kingdom, and thirdly, the risk of falling prices being similar to the existing bargain prices in the United Kingdom. 11 figs.

External factors influencing the environmental performance of South African firms

CSIR Research Space (South Africa)

Peart, R

2001-01-01

Full Text Available This article reviews the external factors that influence environmental performance of companies in South Africa, drawing on international and local literature. After considering factors within the natural, social, economic and institutional...

Measurement and interpretation of threshold stress intensity factors for steels in high-pressure hydrogen gas.

Energy Technology Data Exchange (ETDEWEB)

Dadfarnia, Mohsen (University of Illinois at Urbana-Champaign, Urbana, IL); Nibur, Kevin A.; San Marchi, Christopher W.; Sofronis, Petros (University of Illinois at Urbana-Champaign, Urbana, IL); Somerday, Brian P.; Foulk, James W., III; Hayden, Gary A. (CP Industries, McKeesport, PA)

2010-07-01

Threshold stress intensity factors were measured in high-pressure hydrogen gas for a variety of low alloy ferritic steels using both constant crack opening displacement and rising crack opening displacement procedures. The sustained load cracking procedures are generally consistent with those in ASME Article KD-10 of Section VIII Division 3 of the Boiler and Pressure Vessel Code, which was recently published to guide design of high-pressure hydrogen vessels. Three definitions of threshold were established for the two test methods: K{sub THi}* is the maximum applied stress intensity factor for which no crack extension was observed under constant displacement; K{sub THa} is the stress intensity factor at the arrest position for a crack that extended under constant displacement; and K{sub JH} is the stress intensity factor at the onset of crack extension under rising displacement. The apparent crack initiation threshold under constant displacement, K{sub THi}*, and the crack arrest threshold, K{sub THa}, were both found to be non-conservative due to the hydrogen exposure and crack-tip deformation histories associated with typical procedures for sustained-load cracking tests under constant displacement. In contrast, K{sub JH}, which is measured under concurrent rising displacement and hydrogen gas exposure, provides a more conservative hydrogen-assisted fracture threshold that is relevant to structural components in which sub-critical crack extension is driven by internal hydrogen gas pressure.

Infrapopliteal Percutaneous Transluminal Balloon Angioplasty: Clinical Results and Influence Factors

Energy Technology Data Exchange (ETDEWEB)

Song, Jang Hyeon; Lee, Seung Jin; Jung, Hye Doo; Lim, Jae Hoon; Chang, Nam Kyu; Yim, Nam Yeol; Kim, Jae Kyu [Dept. of Radiology, Chonnam National University Hospital, Gwangju (Korea, Republic of); Lee, Keun Bae [Dept. of Radiology, Chonnam National University Hospital, Gwangju (Korea, Republic of)

2011-09-15

To assess the efficacy of percutaneous transluminal angioplasty (PTA) in patients with infrapopliteal arterial disease, and to determine the influencing factor for prognosis. A total of 55 patients (60 limbs) with infrapopliteal arterial stenosis or occlusion underwent PTA. Atherosclerotic risk factors, clinical symptoms, TransAtlantic Inter-Society Consensus (TASC) classification, and vascular wall calcification were evaluated before PTA. The number of patent infrapopliteal arteries was estimated, and the outcome was evaluated by symptom relief and limb salvage. Technical success was achieved in 53/60 limbs (88.3%) and 81/93 arteries (87.1%), TASC classification (p = 0.038) and vascular calcification (p = 0.002) influenced on technical failure. During follow-up, 26 of 55 limbs (47%) achieved symptom relief and 42/55 limbs (76%) underwent limb salvage. Non-diabetic patients (9/12, 75%) were superior to diabetic patients (17/43, 40%) in terms of symptom relief (p = 0.024). TASC classification and vascular wall calcification influenced on symptom relief and limb salvage. The number of patent infrapopliteal arteries after PTA influenced symptom relief (p < 0.001) and limb amputation (p = 0.003). PTA in patients with chronic critical limb ischemia is worthwhile as a primary treatment. The influence factors should be considered before PTA, and PTA should be performed in as many involved arteries as possible.

Infrapopliteal Percutaneous Transluminal Balloon Angioplasty: Clinical Results and Influence Factors

International Nuclear Information System (INIS)

Song, Jang Hyeon; Lee, Seung Jin; Jung, Hye Doo; Lim, Jae Hoon; Chang, Nam Kyu; Yim, Nam Yeol; Kim, Jae Kyu; Lee, Keun Bae

2011-01-01

To assess the efficacy of percutaneous transluminal angioplasty (PTA) in patients with infrapopliteal arterial disease, and to determine the influencing factor for prognosis. A total of 55 patients (60 limbs) with infrapopliteal arterial stenosis or occlusion underwent PTA. Atherosclerotic risk factors, clinical symptoms, TransAtlantic Inter-Society Consensus (TASC) classification, and vascular wall calcification were evaluated before PTA. The number of patent infrapopliteal arteries was estimated, and the outcome was evaluated by symptom relief and limb salvage. Technical success was achieved in 53/60 limbs (88.3%) and 81/93 arteries (87.1%), TASC classification (p = 0.038) and vascular calcification (p = 0.002) influenced on technical failure. During follow-up, 26 of 55 limbs (47%) achieved symptom relief and 42/55 limbs (76%) underwent limb salvage. Non-diabetic patients (9/12, 75%) were superior to diabetic patients (17/43, 40%) in terms of symptom relief (p = 0.024). TASC classification and vascular wall calcification influenced on symptom relief and limb salvage. The number of patent infrapopliteal arteries after PTA influenced symptom relief (p < 0.001) and limb amputation (p = 0.003). PTA in patients with chronic critical limb ischemia is worthwhile as a primary treatment. The influence factors should be considered before PTA, and PTA should be performed in as many involved arteries as possible.

Influence of vascular network design on gas transfer in lung assist device technology.

Science.gov (United States)

Bassett, Erik K; Hoganson, David M; Lo, Justin H; Penson, Elliot J N; Vacanti, Joseph P

2011-01-01

Blood oxygenators are vital for the critically ill, but their use is limited to the hospital setting. A portable blood oxygenator or a lung assist device for ambulatory or long-term use would greatly benefit patients with chronic lung disease. In this work, a biomimetic blood oxygenator system was developed which consisted of a microfluidic vascular network covered by a gas permeable silicone membrane. This system was used to determine the influence of key microfluidic parameters-channel size, oxygen exposure length, and blood shear rate-on blood oxygenation and carbon dioxide removal. Total gas transfer increased linearly with flow rate, independent of channel size and oxygen exposure length. On average, CO(2) transfer was 4.3 times higher than oxygen transfer. Blood oxygen saturation was also found to depend on the flow rate per channel but in an inverse manner; oxygenation decreased and approached an asymptote as the flow rate per channel increased. These relationships can be used to optimize future biomimetic vascular networks for specific lung applications: gas transfer for carbon dioxide removal in patients with chronic obstructive pulmonary disease or oxygenation for premature infants requiring complete lung replacement therapy.

Nursing students' learning dynamics and influencing factors in clinical contexts.

Science.gov (United States)

Lee, Jung Jae; Clarke, Charlotte L; Carson, Maggie N

2018-03-01

Clinical placements are essential for students to develop clinical skills to qualify as nurses. However, various difficulties encountered by nursing students during their clinical education detract from developing clinical competencies. This constructivist grounded theory study aims to explore nursing students' experiences in clinical nursing education, and to identify the factors that influence the clinical education students receive. Twenty-one individual and six group semi-structured interviews were conducted with sixteen fourth year nursing students and four registered nurses. This research identified six factors that influence nursing students' clinical education: interpersonal, socio-cultural, instructional, environmental, emotional and physical factors. The research has developed a dynamic model of learning in clinical contexts, which offers opportunities to understand how students' learning is influenced multifactorially during clinical placements. The understanding and application of the model can improve nursing instructional design, and subsequently, nursing students' learning in clinical contexts. Copyright © 2017 Elsevier Ltd. All rights reserved.

Torrefaction of cedarwood in a pilot scale rotary kiln and the influence of industrial flue gas.

Science.gov (United States)

Mei, Yanyang; Liu, Rujie; Yang, Qing; Yang, Haiping; Shao, Jingai; Draper, Christopher; Zhang, Shihong; Chen, Hanping

2015-02-01

Torrefaction of cedarwood was performed in a pilot-scale rotary kiln at various temperatures (200, 230, 260 and 290°C). The torrefaction properties, the influence on the grindability and hydroscopicity of the torrefied biomass were investigated in detail as well as the combustion performance. It turned out that, compared with raw biomass, the grindability and the hydrophobicity of the torrefied biomass were significantly improved, and the increasing torrefaction temperature resulted in a decrease in grinding energy consumption and an increase in the proportion of smaller-sized particles. The use of industrial flue gas had a significant influence on the behavior of cedarwood during torrefaction and the properties of the resultant solid products. To optimize the energy density and energy yield, the temperature of torrefaction using flue gas should be controlled within 260°C. Additionally, the combustion of torrefied samples was mainly the combustion of chars, with similar combustion characteristics to lignite. Copyright © 2014 Elsevier Ltd. All rights reserved.

Factors influencing behavior in the forced swim test

Science.gov (United States)

Bogdanova, Olena V.; Kanekar, Shami; D’Anci, Kristen E.; Renshaw, Perry F.

2017-01-01

The forced swim test (FST) is a behavioral test in rodents which was developed in 1978 by Porsolt and colleagues as a model for predicting the clinical efficacy of antidepressant drugs. A modified version of the FST added the classification of active behaviors into swimming and climbing, in order to facilitate the differentiation between serotonergic and noradrenergic classes of antidepressant drugs. The FST is now widely used in basic research and the pharmaceutical screening of potential antidepressant treatments. It is also one of the most commonly used tests to assess depressive-like behavior in animal models. Despite the simplicity and sensitivity of the FST procedure, important differences even in baseline immobility rates have been reported between different groups, which complicate the comparison of results across studies. In spite of several methodological papers and reviews published on the FST, the need still exists for clarification of factors which can influence the procedure. While most recent reviews have focused on antidepressant effects observed with the FST, this one considers the methodological aspects of the procedure, aiming to summarize issues beyond antidepressant action in the FST. The previously published literature is analyzed for factors which are known to influence animal behavior in the FST. These include biological factors, such as strain, age, body weight, gender and individual differences between animals; influence of preconditioning before the FST: handling, social isolation or enriched environment, food manipulations, various kinds of stress, endocrine manipulations and surgery; schedule and routes of treatment, dosage and type of the drugs as well as experimental design and laboratory environmental effects. Consideration of these factors in planning experiments may result in more consistent FST results. PMID:23685235

Factors Influencing the Spatial Difference in Household Energy Consumption in China

Directory of Open Access Journals (Sweden)

Yongxia Ding

2016-12-01

Full Text Available What factors determine the spatial heterogeneity of household energy consumption (HEC in China? Can the impacts of these factors be quantified? What are the trends and characteristics of the spatial differences? To date, these issues are still unclear. Based on the STIRPAT model and panel dataset for 30 provinces in China over the period 1997–2013, this paper investigated influences of the income per capita, urbanization level and annual average temperature on HEC, and revealed the spatial effects of these influencing factors. The results show that the income level is the main influencing factor, followed by the annual average temperature. There exists a diminishing marginal contribution with increasing income. The influence of urbanization level varies according to income level. In addition, from the eastern region to western region of China, variances largely depend upon economic level at the provincial level. From the northern region to southern region, change is mainly caused by temperature. The urbanization level has more significant impact on the structure and efficiency of household energy consumption than on its quantity. These results could provide reference for policy making and energy planning.

[Coagulation factor VII levels in uremic patients and theirs influence factors].

Science.gov (United States)

Fang, Jun; Xia, Ling-Hui; Wei, Wen-Ning; Song, Shan-Jun

2004-12-01

This study was aimed to investigate coagulation factor VII level in uremic patients with chronic renal failure and to explore theirs influence factors. The plasma levels of coagulation factor VII were detected in 30 uremic patients with chronic renal failure before and after hemodialysis for 1 month, the factor VII activity (FVII:C) was determined by one-stage coagulation method, while activated factor VII (FVIIa) was measured by one-stage coagulation method using recombinant soluble tissue factor, and factor VII antigen was detected by ELISA. The results showed that: (1) The FVIIa, FVII:C and FVIIAg levels in chronic uremic patients before hemodialysis were 4.00 +/- 0.86 microg/L, (148.5 +/- 40.4)% and (99.8 +/- 21.1)% respectively, which were significantly increased, as compared with healthy controls [2.77 +/- 1.02 microg/L, (113.1 +/- 33.0)% and (73.7 +/- 18.3)% respectively, P factor VII was positively correlated with levels of blood uria nitrogen and serum creatinine before hemodialysis but not after hemodialysis. It is concluded that the enhanced levels of coagulation factor VII in chronic uremic patients suggested abnormal activated state, herperactivity and elevated production of factor VII which correlated with renal functional injury. The abnormality of factor VII in uremia may be aggravated by hemodialysis. Coagulation factor (FVII) may be a risk factor for cardiovascular events in uremic patients who especially had been accepted long-term hemodialysis.

Factors influencing tinnitus loudness and annoyance.

Science.gov (United States)

Hiller, Wolfgang; Goebel, Gerhard

2006-12-01

To evaluate the 2 major components of tinnitus severity, loudness and annoyance, and their degree of dependence on characteristics of tinnitus manifestation, history, and etiology. Cross-sectional survey performed during the first months of 2004. Nonclinical population. A total of 4995 members of the German Tinnitus League. Comprehensive screening questionnaire, including the Klockhoff and Lindblom loudness grading system and the miniversion of the Tinnitus Questionnaire. A moderate correlation of 0.45 was found between tinnitus loudness and annoyance. Both factors were generally higher in men, those older than 50 years, those with binaural and centrally perceived tinnitus, those with increased noise sensitivity, and those who had continuous tinnitus without interruptions. Tinnitus that lasted 12 months or less had a stronger influence on annoyance (odds ratio [OR], 1.96) than on loudness (OR, 0.45), whereas the contrary was found for tinnitus of more than 5 years' duration (ORs, 0.72 and 2.11, respectively). Loudness and annoyance were increased in subjects with coexisting hearing loss, vertigo, and hyperacusis. The impact of hyperacusis on annoyance was clearly stronger than on loudness (ORs, 21.91 vs 9.47). Several clinical factors of tinnitus influence perceived loudness and annoyance. Both are distinguishable components of tinnitus severity.

Assessing the Factors Influencing Women Attainment of Household ...

African Journals Online (AJOL)

This study assessed the factors influencing the attainment of household food security in Ikwuano ... Data analysis utilized descriptive statistics such as frequency counts, ... had no access to credits, 71.7% had no contact with extension service.

Evaluation of some genetic factors influencing the phenotypic ...

African Journals Online (AJOL)

Evaluation of some genetic factors influencing the phenotypic severity of β thalassemia Egyptian patients. Ibtessam R Hussein, Amina M Medhat, Samir F Zohny, Alice K Abd El-Aleem, Ghada Y El-Kammah, Bardees M Foda ...

Factors influencing the adoption of smartphones by undergraduate ...

African Journals Online (AJOL)

Factors influencing the adoption of smartphones by undergraduate students at ... ha ve thus far c oncentrated on the adoption of mobile technologies especially ... who may also want to explore the implementation of mobile learning systems, ...

38 FACTORS THAT INFLUENCE IRON STATUS OF PREGNANT ...

African Journals Online (AJOL)

sys01

The study investigated the factors that influence iron ... approaches employed for promotion of girl-child education and prevention of adolescent .... purchase food items rich in haem iron such as ... decision making, life style options, and control.

Analysis on influence factors of China's CO2 emissions based on Path-STIRPAT model

International Nuclear Information System (INIS)

Li Huanan; Mu Hailin; Zhang Ming; Li Nan

2011-01-01

With the intensification of global warming and continued growth in energy consumption, China is facing increasing pressure to cut its CO 2 (carbon dioxide) emissions down. This paper discusses the driving forces influencing China's CO 2 emissions based on Path-STIRPAT model-a method combining Path analysis with STIRPAT (stochastic impacts by regression on population, affluence and technology) model. The analysis shows that GDP per capita (A), industrial structure (IS), population (P), urbanization level (R) and technology level (T) are the main factors influencing China's CO 2 emissions, which exert an influence interactively and collaboratively. The sequence of the size of factors' direct influence on China's CO 2 emission is A>T>P>R>IS, while that of factors' total influence is A>R>P>T>IS. One percent increase in A, IS, P, R and T leads to 0.44, 1.58, 1.31, 1.12 and -1.09 percentage change in CO 2 emission totally, where their direct contribution is 0.45, 0.07, 0.63, 0.08, 0.92, respectively. Improving T is the most important way for CO 2 reduction in China. - Highlights: → We analyze the driving forces influencing China's CO 2 emissions. → Five macro factors like per capita GDP are the main influencing factors. → These factors exert an influence interactively and collaboratively. → Different factors' direct and total influence on China's CO 2 emission is different. → Improving technology level is the most important way for CO 2 reduction in China.

The Factors Influencing Satisfaction with Public City Transport: A Structural Equation Modelling Approach

Directory of Open Access Journals (Sweden)

Pawlasova Pavlina

2015-12-01

Full Text Available Satisfaction is one of the key factors which influences customer loyalty. We assume that the satisfied customer will be willing to use the ssame service provider again. The overall passengers´ satisfaction with public city transport may be affected by the overall service quality. Frequency, punctuality, cleanliness in the vehicle, proximity, speed, fare, accessibility and safety of transport, information and other factors can influence passengers´ satisfaction. The aim of this paper is to quantify factors and identify the most important factors influencing customer satisfaction with public city transport within conditions of the Czech Republic. Two methods of analysis are applied in order to fulfil the aim. The method of factor analysis and the method Varimax were used in order to categorize variables according to their mutual relations. The method of structural equation modelling was used to evaluate the factors and validate the model. Then, the optimal model was found. The logistic parameters, including service continuity and frequency, and service, including information rate, station proximity and vehicle cleanliness, are the factors influencing passengers´ satisfaction on a large scale.

Factors Influencing Student Nurses' Performance in the Final ...

African Journals Online (AJOL)

Factors Influencing Student Nurses' Performance in the Final Practical Examination ... Staff development courses can be held to coordinate the work of the school ... to authentic individual nursing care of patients so that they use the individual ...

Factors influencing breastfeeding practices in Edo state, Nigeria ...

African Journals Online (AJOL)

In Nigeria however, young infants may not benefit from such a practice as a ... The purpose of this study was to determine factors influencing breastfeeding practices in Edo State, Nigeria. ... Only 20 per cent practiced exclusive breastfeeding.

Factors of influence and changes in the tourism consumer behaviour

Directory of Open Access Journals (Sweden)

Fratu, D.

2011-01-01

Full Text Available Consumer behaviour is a very important aspect to be studied in every marketing activity, therefore in tourism marketing as well. Defining and identifying the factors that influence consumers help in understanding individual needs and buying processes in their whole complexity. Consumers have changed their behaviour over the last two years due to the instability of the economic environment. The author describes in this article the factors which influence consumer behaviour and also presents how it has changed over the past two years.

FACTORS INFLUENCING THE MANAGEMENT OF ADHD

OpenAIRE

S ARMAN; M SOLTANI

2003-01-01

Introduction: Attention deficit hyperactivity disorder (ADHD)is the most common psychiatric disorder among school age children. It consists of hyperactivity, inattention and impulsive behavior. The onset of the disorder is before the age of 7 years and it happens at least in two situations. It causes significant impairment in social and academic functioning. A determination of factors that influences the therapeutic response in ADHD is the aim of this study. Methods: This study is design...

The influence of family factors on delinquent adolescents in ...

African Journals Online (AJOL)

This study was carried out with the aim of finding out the influence of family factors on delinquent adolescents in secondary schools in Edo South Senatorial District of Edo State. This study ascertained the extents to which family factors such as parent child rearing style, family type and parent socio economic background ...

Modeling the factors that influence knowledge transfer in mergers and acquisitions

Institute of Scientific and Technical Information of China (English)

YU Haiyan; LIANG Zhanping

2010-01-01

This paper constructs a model on the factors that influence knowledge transfer in mergers and acquisitions (M&A) and validates it via questionnaire surveys.Using 125 valid collected questionnaires,multiple linear regression analysis and hierarchical regression analysis showed that five out of the ten factors had a positive effect on knowledge transfer effect.The ranking of factor importance,from high to low,was knowledge explicitness,relationship quality,learning intent,advanced transfer activities,and learning capability,which is fairly consistent with positive factors observed in other interorganizational knowledge transfer researches.Our results also showed that one of the control variables (size of acquired firm) had neither a direct or indirect effect on knowledge transfer in M&A.Additionally,our research found that knowledge distance and degree of M&A integration had a positive influence on knowledge transfer effect at the early stage after M&A,but had a negative influence at the late stage.Based on this research,several suggestions for knowledge transfer in M&A are proposed.

Modeling the factors that influence knowledge transfer in mergers and acquisitions

Institute of Scientific and Technical Information of China (English)

YU; Haiyan; LIANG; Zhanping

2010-01-01

This paper constructs a model on the factors that influence knowledge transfer in mergers and acquisitions(M&A)and validates it via questionnaire surveys.Using 125valid collected questionnaires,multiple linear regression analysis and hierarchical regression analysis showed that five out of the ten factors had a positive effect on knowledge transfer effect.The ranking of factor importance,from high to low,was knowledge explicitness,relationship quality,learning intent,advanced transfer activities,and learning capability,which is fairly consistent with positive factors observed in other interorganizational knowledge transfer researches.Our results also showed that one of the control variables(size of acquired firm)had neither a direct or indirect effect on knowledge transfer in M&A.Additionally,our research found that knowledge distance and degree of M&A integration had a positive influence on knowledge transfer effect at the early stage after M&A,but had a negative influence at the late stage.Based on this research,several suggestions for knowledge transfer in M&A are proposed.

A Study of Factors Influencing International Students' Choice of Higher Education Institutions

OpenAIRE

Akadu, Victor Abia

2013-01-01

This paper discusses the factors that influence international students’ choice of higher education institutions. The research conducted using the international students in the University of Nottingham (Malaysia Campus) and Monash University (Malaysia Campus) and survey questionnaires were mainly used to gather primary data for the purpose of this study. Findings from this research indicated that product and university based factors, cost factors, promotion, location and social influences all ...

Verification of maximum radial power peaking factor due to insertion of FPM-LEU target in the core of RSG-GAS reactor

Energy Technology Data Exchange (ETDEWEB)

Setyawan, Daddy, E-mail: d.setyawan@bapeten.go.id [Center for Assessment of Regulatory System and Technology for Nuclear Installations and Materials, Indonesian Nuclear Energy Regulatory Agency (BAPETEN), Jl. Gajah Mada No. 8 Jakarta 10120 (Indonesia); Rohman, Budi [Licensing Directorate for Nuclear Installations and Materials, Indonesian Nuclear Energy Regulatory Agency (BAPETEN), Jl. Gajah Mada No. 8 Jakarta 10120 (Indonesia)

2014-09-30

Verification of Maximum Radial Power Peaking Factor due to insertion of FPM-LEU target in the core of RSG-GAS Reactor. Radial Power Peaking Factor in RSG-GAS Reactor is a very important parameter for the safety of RSG-GAS reactor during operation. Data of radial power peaking factor due to the insertion of Fission Product Molybdenum with Low Enriched Uranium (FPM-LEU) was reported by PRSG to BAPETEN through the Safety Analysis Report RSG-GAS for FPM-LEU target irradiation. In order to support the evaluation of the Safety Analysis Report incorporated in the submission, the assessment unit of BAPETEN is carrying out independent assessment in order to verify safety related parameters in the SAR including neutronic aspect. The work includes verification to the maximum radial power peaking factor change due to the insertion of FPM-LEU target in RSG-GAS Reactor by computational method using MCNP5and ORIGEN2. From the results of calculations, the new maximum value of the radial power peaking factor due to the insertion of FPM-LEU target is 1.27. The results of calculations in this study showed a smaller value than 1.4 the limit allowed in the SAR.

Factors influencing recruitment and retention of professional nurses ...

African Journals Online (AJOL)

J. Lyn Haskins

factors influencing recruitment and retention of three categories of HPs in KwaZulu-Natal and has ...... tion, with good career opportunities which were similar in both urban and rural .... attract nurses to rural areas: A multicountry discrete choice.

Perceived factors influencing the utilization of traditional birth ...

African Journals Online (AJOL)

Perceived factors influencing the utilization of traditional birth attendants' services in ... A total of 130 questionnaires were retrieved and analyzed using statistical ... Poverty (p=0.988) and educational level (p =0.133) were not found to be ...

Factors influencing adherence to dietary guidelines: a qualitative ...

African Journals Online (AJOL)

2014-01-17

Jan 17, 2014 ... Original Research: Factors influencing adherence to dietary guidelines. 76. 2014 Volume ..... eat, because they dik (tired) of giving you special food. Then they go .... patients in this study were satisfied with the advice received ...

Factors influencing Nigerian men's decision to undergo prostate ...

African Journals Online (AJOL)

Objective: This study explores the factors that influence a group of Nigerian men's decision to go for Prostate Specific ..... older they were in the habit of regularly visiting the hospi- .... friends with prostate cancer was an important stimulus.

Evaluation of the efficacy of factors influencing on marketing SMEs

Directory of Open Access Journals (Sweden)

Mona Yaghoubi

2014-07-01

Full Text Available This paper presents an empirical investigation to study the effects of different factors influencing on marketing in small and medium enterprises (SMEs in city of Tehran, Iran. The study has been accomplished among 57 SMEs out of 70 active business units who were involved in hand made carpet. The survey uses a questionnaire originally developed by Merrilees et al. (2011 [Merrilees, B., Rundle-Thiele, S., & Lye, A. (2011. Marketing capabilities: Antecedents and implications for B2B SME performance. Industrial Marketing Management, 40(3, 368-375.] to determine the factors influencing on marketing SMEs. Using structural equation modeling, the results of survey indicate that market orientation, management capability, innovation capability and brand capability of SME's marketing performance influence on development of marketing, positively.

Organizational factors influencing successful primary care and public health collaboration.

Science.gov (United States)

Valaitis, Ruta; Meagher-Stewart, Donna; Martin-Misener, Ruth; Wong, Sabrina T; MacDonald, Marjorie; O'Mara, Linda

2018-06-07

Public health and primary care are distinct sectors within western health care systems. Within each sector, work is carried out in the context of organizations, for example, public health units and primary care clinics. Building on a scoping literature review, our study aimed to identify the influencing factors within these organizations that affect the ability of these health care sectors to collaborate with one another in the Canadian context. Relationships between these factors were also explored. We conducted an interpretive descriptive qualitative study involving in-depth interviews with 74 key informants from three provinces, one each in western, central and eastern Canada, and others representing national organizations, government, or associations. The sample included policy makers, managers, and direct service providers in public health and primary care. Seven major organizational influencing factors on collaboration were identified: 1) Clear Mandates, Vision, and Goals; 2) Strategic Coordination and Communication Mechanisms between Partners; 3) Formal Organizational Leaders as Collaborative Champions; 4) Collaborative Organizational Culture; 5) Optimal Use of Resources; 6) Optimal Use of Human Resources; and 7) Collaborative Approaches to Programs and Services Delivery. While each influencing factor was distinct, the many interactions among these influences are indicative of the complex nature of public health and primary care collaboration. These results can be useful for those working to set up new or maintain existing collaborations with public health and primary care which may or may not include other organizations.

FACTORS INFLUENCING YIELD SPREADS OF THE MALAYSIAN BONDS

OpenAIRE

Norliza Ahmad; Joriah Muhammad; Tajul Ariffin Masron

2009-01-01

Malaysian bond market is developing rapidly but not much is understood in terms of macroeconomic factors that could influence the yield spread of the Ringgit Malaysian denominated bonds. Based on a multifactor model, this paper examines the impact of four macroeconomic factors namely: Kuala Lumpur Composite Index (KLCI), Industry Production Index (IPI), Consumer Price Index (CPI) and interest rates (IR) on bond yield spread of the Malaysian Government Securities (MGS) and Corporate Bonds (CBs...

FACTORS INFLUENCING BRAND LOYALTY IN PROFESSIONAL SPORTS FANS

OpenAIRE

Yun-Tsan Lin; Chen-Hsien Lin

2008-01-01

Many researchers have provided comprehensive definitions for the term of brand loyalty and also examined the factors affecting brand loyalty with many empirical studies. But there is little research focusing on the brand loyalty of professional sports fans. The topic area about factors influencing brand loyalty in professional sports fans was identified because these fans bring significant financial benefits every year and stimulate economic growth in the United States. Although different con...

Research on Influencing Factors of Salespeople's Empowerment Readiness in Green Energy Enterprise

Science.gov (United States)

Dong, Yuan; Liu, Xiaohui

As market competition in green energy enterprises continues to intensify, marketing activities are enlarging and customer demand is increasingly growing and diversifying. More and more green energy enterprises have empowered their own salespeople. And managers in green energy enterprises are more concerned with the issues which employees suit to be empowered and which factors will influence employee empowerment readiness. This paper proposes the definition of salespeople's empowerment readiness, analyzes influencing factors of salespeople's empowerment readiness, discusses the effect mechanism of influencing factors of salespeople's empowerment readiness, finally, and puts forward some suggestions to enhance salespeople's empowerment readiness from the perspective of human resource management practice.

Factors influencing the density of aerobic granular sludge.

NARCIS (Netherlands)

Winkler, M.K.; Kleerebezem, R.; Strous, M.; Chandran, K.; Loosdrecht, M.C. van

2013-01-01

In the present study, the factors influencing density of granular sludge particles were evaluated. Granules consist of microbes, precipitates and of extracellular polymeric substance. The volume fractions of the bacterial layers were experimentally estimated by fluorescent in situ hybridisation

Factors Which Influence The Fish Purchasing Decision: A study on Traditional Market in Riau Mainland

Science.gov (United States)

Siswati, Latifa; Putri, Asgami

2018-05-01

The purposes of the research are to analyze and assess the factors which influence fish purchasing by the community at Tenayan Raya district Pekanbaru.Research methodology which used is survey method, especially interview and observation technique or direct supervision on the market which located at Tenayan Raya district. Determination technique of sampling location/region is done by purposive sampling. The sampling method is done by accidental sampling. Technique analysis of factors which used using the data that derived from the respondent opinion to various fish variable. The result of this research are the factors which influence fish purchasing decision done in a traditional market which located at Tenayan Raya district are product factor, price factors, social factor and individual factor. Product factor which influences fish purchasing decision as follows: the eyelets condition, the nutrition of fresh fish, the diversity of sold fish. Price factors influence the fish purchasing decision, such as: the price of fresh fish, the convincing price and the suitability price and benefits of the fresh fish. Individual factors which influence a fish purchasing decision, such as education and income levels. Social factors which influence a fish purchasing decision, such as family, colleagues and feeding habits of fish.

Generational Approach to Factors Influencing Career Choice in Accounting

Directory of Open Access Journals (Sweden)

Jony Hsiao

Full Text Available ABSTRACT This research aims to grasp which factors influence the generation Y to choose accounting as its career. A significant decline in the number of candidates willing to pursue a career as accountant has been observed abroad - USA, Australia, and Japan. However, in other countries - Brazil, Singapore, and Hong Kong - the opposite has been observed. Another issue is the decline in educational qualification of those pursuing an accounting career, contributing in a way that many talented students change their career choice. This may be explained by the fact that people tend to believe accounting is an exact science, full of calculations, boring, and not very creative, bringing an unbalance between the traits an individual should have according to the job market and those perceived by society. In order to give a contribution to literature concerning the factors that influence the generation Y in its career choice, a goal of this research was conducting an exploratory study where some hypotheses were formulated to support the discussion. We used Mannheim's Generational Theory and the literature on career choice. Data collection was carried out using a questionnaire, based on Schwartz's Portrait Value Questionnaire and Germeijs and Verschueren's Student Choice Task Inventory, adapted through focus group interview. Data were fully collected online and the sample consisted of 665 subjects. The results showed that people who chose accounting as their career were influenced by factors such as creativity, independence, challenging and dynamic environment, job security, money-making, job availability, and other significant people - friends and teachers. The subjects were not influenced by social factors, such as working with people and making contributions to society and family. They wish for more autonomy, creativity, and flexibility at work, and people still care about job security and money-making.

An empirical study on key factors for purchasing strategy on project based organizations: A case study of gas field development projects

Directory of Open Access Journals (Sweden)

Aboulfazl Kazazi

2012-08-01

Full Text Available One of the primary concerns in development of oil and gas resources is to find the critical success factors associated with different important projects. Purchasing and procurement plays a key role in these projects. There is no doubt that in history of similar studies, there are not much studies to determine key factors. The proposed study of this paper presents an empirical study to find these factors in one of the most important gas filed in Iran is now South Pars Gas Field. The study distributes a questionnaire consists of various questions associated with purchasing activities. We investigate the feedbacks gathered from decision makers using factor analysis. The results of our survey reveal that there are three categories of organizational strategy, the relative importance of strategy and risk according to factor analysis. Each factor consists of many other factors and the relative importance of all factors are investigated.

Factors influencing elderly women's mammography screening decisions: implications for counseling.

Science.gov (United States)

Schonberg, Mara A; McCarthy, Ellen P; York, Meghan; Davis, Roger B; Marcantonio, Edward R

2007-11-16

Although guidelines recommend that clinicians consider life expectancy before screening older women for breast cancer, many older women with limited life expectancies are screened. We aimed to identify factors important to mammography screening decisions among women aged 80 and older compared to women aged 65-79. Telephone surveys of 107 women aged 80+ and 93 women aged 65-79 randomly selected from one academic primary care practice who were able to communicate in English (60% response rate). The survey addressed the following factors in regards to older women's mammography screening decisions: perceived importance of a history of breast disease, family history of breast cancer, doctor's recommendations, habit, reassurance, previous experience, mailed reminder cards, family/friend's recommendations or experience with breast cancer, age, health, and media. The survey also assessed older women's preferred role in decision making around mammography screening. Of the 200 women, 65.5% were non-Hispanic white and 82.8% were in good to excellent health. Most (81.3%) had undergone mammography in the past 2 years. Regardless of age, older women ranked doctor's recommendations as the most important factor influencing their decision to get screened. Habit and reassurance were the next two highly ranked factors influencing older women to get screened. Among women who did not get screened, women aged 80 and older ranked age and doctor's counseling as the most influential factors and women aged 65-79 ranked a previous negative experience with mammography as the most important factor. There were no significant differences in preferred role in decision-making around mammography screening by age, however, most women in both age groups preferred to make the final decision on their own (46.6% of women aged 80+ and 50.5% of women aged 65-79). While a doctor's recommendation is the most important factor influencing elderly women's mammography screening decisions, habit and reassurance

Risk Factors Influencing Construction Procurement Performance in Nigeria

Directory of Open Access Journals (Sweden)

Alhassan Dahiru

2015-08-01

Full Text Available One of the challenges facing construction procurement performance is the failure to determine the risk related factors limiting its success. These risk factors can cause a significant increase in the procurement cost leading to an increase in the overall project cost. The purpose of this study is to identify and evaluate the risk factors influencing construction procurement performance with a view to achieve the overall project performance. The objectives are to establish a relative significance index score for the most important risk factors limiting the procurement performance of the projects. A self administered questionnaire was employed to the construction industry professionals for responses. A total of 78 questionnaires were distributed to these professionals (architects, quantity surveyors, engineers, and contractors but 62 were returned and analyzed using influential index and later ranked in order of importance. Results of the analysis indicate a disparity in terms of ranking of the factors influencing construction procurement performance. Corruption related risk, conflict of interest, ineffective project technical feasibility, and lack of commitment to transparency were found to be the most significant factors limiting construction procurement performance. Communication barriers and unconfidential tender evaluation process were found to be the low weighted risk factors. The findings can serve as a supportive mechanism for risks management in public construction procurement management. Therefore, construction procurement personnel at all levels of government may find this study relevant, while improving construction procurement performance in the country. It is recommended that construction procurement system should be focused on risks related to corruption, conflict of interest, and effective technical feasibility for improving the overall project performance.

Domain-General Factors Influencing Numerical and Arithmetic Processing

Directory of Open Access Journals (Sweden)

André Knops

2017-12-01

Full Text Available This special issue contains 18 articles that address the question how numerical processes interact with domain-general factors. We start the editorial with a discussion of how to define domain-general versus domain-specific factors and then discuss the contributions to this special issue grouped into two core numerical domains that are subject to domain-general influences (see Figure 1. The first group of contributions addresses the question how numbers interact with spatial factors. The second group of contributions is concerned with factors that determine and predict arithmetic understanding, performance and development. This special issue shows that domain-general (Table 1a as well as domain-specific (Table 1b abilities influence numerical and arithmetic performance virtually at all levels and make it clear that for the field of numerical cognition a sole focus on one or several domain-specific factors like the approximate number system or spatial-numerical associations is not sufficient. Vice versa, in most studies that included domain-general and domain-specific variables, domain-specific numerical variables predicted arithmetic performance above and beyond domain-general variables. Therefore, a sole focus on domain-general aspects such as, for example, working memory, to explain, predict and foster arithmetic learning is also not sufficient. Based on the articles in this special issue we conclude that both domain-general and domain-specific factors contribute to numerical cognition. But the how, why and when of their contribution still needs to be better understood. We hope that this special issue may be helpful to readers in constraining future theory and model building about the interplay of domain-specific and domain-general factors.

Factors influencing exacerbation-related self-management in patients with COPD: a qualitative study.

Science.gov (United States)

Korpershoek, Yjg; Vervoort, Scjm; Nijssen, Lit; Trappenburg, Jca; Schuurmans, M J

2016-01-01

In patients with COPD, self-management skills are important to reduce the impact of exacerbations. However, both detection and adequate response to exacerbations appear to be difficult for some patients. Little is known about the underlying process of exacerbation-related self-management. Therefore, the objective of this study was to identify and explain the underlying process of exacerbation-related self-management behavior. A qualitative study using semi-structured in-depth interviews was performed according to the grounded theory approach, following a cyclic process in which data collection and data analysis alternated. Fifteen patients (male n=8; age range 59-88 years) with mild to very severe COPD were recruited from primary and secondary care settings in the Netherlands, in 2015. Several patterns in exacerbation-related self-management behavior were identified, and a conceptual model describing factors influencing exacerbation-related self-management was developed. Acceptance, knowledge, experiences with exacerbations, perceived severity of symptoms and social support were important factors influencing exacerbation-related self-management. Specific factors influencing recognition of exacerbations were heterogeneity of exacerbations and habituation to symptoms. Feelings of fear, perceived influence on exacerbation course, patient beliefs, ambivalence toward treatment, trust in health care providers and self-empowerment were identified as specific factors influencing self-management actions. This study provided insight into factors influencing exacerbation-related self-management behavior in COPD patients. The conceptual model can be used as a framework for health care professionals providing self-management support. In the development of future self-management interventions, factors influencing the process of exacerbation-related self-management should be taken into account.

Metabolism and gas exchange patterns in Rhodnius prolixus.

Science.gov (United States)

Schilman, Pablo E

Insect's metabolic rate and patterns of gas-exchange varies according to different factors such as: species, activity, mass, and temperature among others. One particular striking pattern of gas-exchange in insects is discontinuous gas-exchange cycles, for which many different hypotheses regarding their evolution have been stated. This article does not pretend to be an extensive review on the subject, rather to focus on the work performed on the haematophagous bug Rhodnius prolixus, a model organism used from the mid XX century until present days, with the great influence of Wigglesworth and his students/collaborator's work. I have no doubt that the renovated field of insect gas-exchange has a bright future and will advance at large gaits thank to the help of this model organism, R. prolixus, whose entire genome has recently being unraveled. Copyright © 2016 Elsevier Ltd. All rights reserved.

Franchised fast food brands: An empirical study of factors influencing growth

OpenAIRE

Christopher A. Wingrove; Boris Urban

2017-01-01

Orientation: Franchising is a popular and multifaceted business arrangement that captures a sizeable portion of the restaurant industry worldwide. Research purpose: The study empirically investigated the influence of various site location and branding factors on the growth of franchised fast food restaurant brands across the greater Gauteng region. Motivation of the study: Researching which factors influence the growth of franchised fast food restaurant brands is important for an emer...

Factors influencing endometrial thickness in postmenopausal women.

Science.gov (United States)

Hebbar, S; Chaya, V; Rai, L; Ramachandran, A

2014-07-01

Cut-off values for endometrial thickness (ET) in asymptomatic postmenopausal woman have been standardized. However, there are no comprehensive studies to document how various factors can influence the ET after the age of menopause. To study the various factors influencing the ET in postmenopausal women. This was a prospective observational study. A total of 110 postmenopausal women underwent detailed history taking, clinical examination, and transvaginal scan for uterine volume and ovarian volume. The volumes were calculated by using ellipsoid formula: Width × thickness × height × 0.523. The variation in ET with respect to the influencing factors such as age, duration of menopause, parity, body mass index (BMI), medical illness like diabetes/hypertension, drugs like tamoxifen, presence of myoma, uterine volume, ovarian volume, and serum estradiol (in selected patients) were measured. Descriptive analysis was performed using SPSS software (version 16, Chicago II, USA) to obtain mean, standard deviation (SD), 95% confidence intervals (CIs) and inter quartile ranges. Comparison of means was carried out using analysis of variance. The mean (SD) age of the patients was 55.4 (6.91) years (95% CI, 54.1, 56.7). The mean (SD) age at menopause was 47.95 (3.90) years (95% CI, 47.2, 48.7) and the mean (SD) duration of menopause was 7.27 (6.65) years (95% CI, 6.01, 8.53). The mean (SD) ET was 3.8 (2.3) mm (95% CI, 3.36, 4.23). Medical illness like diabetes and hypertension did not alter the ET. ET increased as BMI increased and it was statistically significant. The presence of myoma increased uterine volume significantly and was associated with thick endometrial stripe. Similarly, whenever the ovaries were visualized and as the ovarian volume increased, there was an increase in ET. When ET was > 4 mm (n = 37), they were offered endocel, of which 16 agreed to undergo the procedure. None were found to have endometrial cancer. This study suggests that parity, BMI, presence of

Factors Influencing Adjustment to Late-Life Divorce.

Science.gov (United States)

Wilson, Keren Brown; DeShane, Michael R.

Although the rate of divorce among older Americans has increased steadily, little attention has been paid to late life divorce. To describe the role of age and other factors which might influence adjustment to divorce in later life, data from a larger pilot study were used: 81 divorced persons over the age of 60 completed in-depth, structured…

Factors Influencing the Willingness to Pay User Fees

OpenAIRE

Morse, George W.

2012-01-01

In this Note I explore the factors which influence the demand side of program participation, or the willingness to pay (WTP). The WTP estimates can help you determine how many people will participate in an event at each fee level.

Factors that influence on the decisions of battered women

Directory of Open Access Journals (Sweden)

Juana Robledo Martín

2008-01-01

Full Text Available Violence towards and against women consists in any kind of violation of woman’s personality, her physical integrity or her freedom of movement. Nowadays, gender-based violence is considered a state and public health problem as well as a social concerning subject.Objective: To identify the factors that influence on the decisions that battered women make.Methodology: The study population are battered women who live in Madrid province and who are being attended in the Municipal Points of the Regional Observatory against the Gender Violence.The information was collected by performing focus groups and deep interviews.Results: There are several factors which influence on the decisions that battered women make, like the existence or not of children they have to take care of, the economic dependence and the ignorance of the woman, in some cases, of the existence of this ill-treatment, but over all, we could even say beyond all these, there is one that is the most important, common and we could say it is the main axis that determine their behaviour. This factor is fear.Discussion: When attending these women we may be aware of the psychological situation they are, and we should be able to identify if the woman is asking us for help when she comes to us and try to identify and treat this factor that influences the decisions the woman we attend makes.

Methanogenic pathways of coal-bed gas in the Powder River Basin, United States: The geologic factor

Energy Technology Data Exchange (ETDEWEB)

Flores, Romeo M.; Rice, Cynthia A.; Stricker, Gary D.; Warden, Augusta; Ellis, Margaret S. [U.S. Geological Survey, Box 25046, MS 939, Denver, Colorado 80225 (United States)

2008-10-02

decrease of methane composition of the coal-bed gas. Other geologic factors, such as burial, thermal and maturation history, lateral and vertical continuity, and coalification of the coal beds, also played a significant role in controlling methanogenic pathways and provided new perspectives on gas evolution and emplacement. The early-stage gas produced by CO{sub 2} reduction has mixed with transitional thermogenic gas in the deeper, central parts of the Powder River Basin to form 'old' gas, whereas along the basin margins the overprint of gas from methyl-type fermentation represents 'new' gas. Thus, a clear understanding of these geologic factors is necessary to relate the microbiological, biogeochemical, and hydrological processes involved in the generation of coal-bed gas. (author)

Factors Influencing the Effectiveness of Inventory Management in Manufacturing SMEs

Science.gov (United States)

Chan, Shiau Wei; Tasmin, R.; Nor Aziati, A. H.; Zuraidah Rasi, Raja; Ismail, Fadillah Binti; Yaw, Li Ping

2017-08-01

Effectiveness of inventory management is a vital part in the manufacturing organization to be more competitive. The previous studies have indicated that there are several factors influencing the effectiveness of inventory management in the organization but there is lack of researchers who carried out the research in the manufacturing small medium enterprise in Johor. Therefore, the purpose of this research is to identify the problem of inventory management faced by the manufacturing small medium enterprise and also to determine the factors that will influence the effectiveness of inventory management. In completing this research, 80 employees were selected randomly from the manufacturing small medium enterprise in Batu Pahat, Johor and they were requested to complete questionnaires. The result have shown that the problems of inventory management faced by manufacturing organization were underproduction, overproduction, stock out situation, delays in the delivery of raw materials and discrepancy of records. The factors, documentation/store records, planning, knowledge of employees/staff skill have shown to significantly influence the effectiveness of inventory management while the funds have shown slightly significant influence on the inventory management in manufacturing small medium enterprises. This quantitative study is important to the manufacturing organization in Malaysia because it provides the guidelines to the employers of manufacturing small medium enterprises in Batu Pahat, Johor.

Cheap Talk: “Team Factors and Management Practices Influence on Team Trust”

OpenAIRE

Doris Padmini Selvaratnam; Aini Aman; Muhamad Maziz Mahyuddin Bin Kamaludin; Gary Lynn; Richard Reilly

2016-01-01

Team trust has been cited as a contributing factor towards team performance. This paper looks at the antecedents of team trust and to what extent they influence team trust. The antecedents of team trust are team factors like team autonomy, team stability and team member experience; and the management practices are top management involvement and management support. The results demonstrated that team factors and management practices influence team trust individually. The key find...

The influence of gas fuelling location on H-mode access in the MAST spherical tokamak

International Nuclear Information System (INIS)

Field, A R; Carolan, P G; Conway, N J; Counsell, G F; Cunningham, G; Helander, P; Meyer, H; Taylor, D; Tournianski, M R; Walsh, M J

2004-01-01

The observation that high-field side (HFS) gas puff refuelling facilitates access to the improved confinement (H-mode) regime on the COMPASS-D and MAST tokamaks prompted a theoretical investigation of the role of the neutral gas dynamics in controlling the edge plasma rotation and radial E-field, E r . Within the framework of neo-classical theory, higher edge plasma flow, and hence E r , are predicted when fuelling from the HFS-rather than from the more usual low-field side (LFS)-provided neutral viscosity dominates the transport of toroidal angular momentum. Here, these predictions are compared with experiments on MAST, where the influence of the gas-puff location on the edge E r profile is measured spectroscopically. An increase in E r is indeed observed with HFS refuelling in the region where the edge transport barrier forms, provided the neutral density at the LFS is sufficiently low so as not to damp the toroidal flow

ESTIMATION OF EXTERNAL FACTORS INFLUENCE ON THE ORGANIZATIONAL AND RESOURCE SUPPORT OF ENGINEERING

Directory of Open Access Journals (Sweden)

Yu. V. Gusak

2013-09-01

Full Text Available Purpose. The engineering industry is characterized by deep specialization and high co-operation, which suggests a high degree of interaction with other industries and the economy, highly sensitive to external factors. Effective regulation of the engineering industry’s organizational-resource support will ensure coherence of all the subsystems of the market economy, the competitive environment, a full course of the investment process and the success of the industry. Therefore there is a need for detailed estimation and analysis of the external factors’ influence on the formation and implementation indexes of the engineering industry’s organizational-resource support. Methodology. To establish the close connection between the set of external factors of formation and implementation indexes of the engineering industry organizational-resource support the correlation analysis was used, to calculate the amount of the formation and implementation indexes of the engineering industry organizational-resource support’s change under the influence of the external factors with malleability coefficient were applied. Findings. The external influence factors on the engineering industry organizational-resource support by the source of origin: industrial, economical, political, informational, and social were separated and grouped. The classification of the external factors influence on the engineering industry organizational-resource support, depending on their influence’s direction on the formation and implementation indexes of the engineering industry’s organizational-resource support was made. The connection closeness and the amount of the formation and implementation indexes of the engineering industry organizational-resource support change (the machinery index of and the sales volume machinery index under the influence of the external factors with malleability coefficient were determined. Originality. The estimation of the external factors

An exploration study on factors influencing green marketing

Directory of Open Access Journals (Sweden)

Mojtaba Esmaeeli

2013-05-01

Full Text Available These days, there have been tremendous efforts on offering products, which are environment friendly. Green marketing plays an important role for attracting new customer and customer retention. This paper presents an empirical investigation based on the implementation of factor analysis to locate important factors influencing green marketing planning and strategies. building market oriented business units. The study designs a questionnaire including 23 questions and the questionnaire was distributed among 200 people who were visiting organic product exhibition. Cronbach alpha was calculated as 0.845, which is well above the minimum acceptable limit and validates the results. The results of factor analysis reveal four major factors including green labeling, compatibility, product value and marketing component and size.

Analysis of the natural gas market in Fortaleza metropolitan region (Brazil); Analise do mercado de gas natural na regiao metropolitana de Fortaleza

Energy Technology Data Exchange (ETDEWEB)

Barroso, Carlos Andre M.; Rabelo, Clarice A.C.; Santana, Lana L.P.; Sucupira, Marcos L.L. [Universidade Federal do Ceara (UFC), Fortaleza, CE (Brazil)

2004-07-01

Natural gas has become one of the most important energy sources, as we can observe in most countries' energy sector, where its presence is very significant. In Brazil, natural gas corresponds to 7,5% of all energy Also available, and the government has plans to increase this number to 12% until 2010. However, in order to reach this goal, it is important to understand how market works, evaluating all the aspects that have some influence on it. This paper goal is to analyze the natural gas market in Fortaleza metropolitan region, emphasizing the industrial sector, the biggest consumer in Ceara State. The main aspects are characterized here, like professionals qualification in the area, service quality, from equipment and maintenance suppliers until gas distributors, legal aspects, and other factors that are also relevant to a possible future expansion of different natural gas market segments (industry, residence, commerce and transport). (author)

Factors influencing societal response of nanotechnology : an expert stakeholder analysis

NARCIS (Netherlands)

Gupta, N.; Fischer, A.R.H.; Lans, van der I.A.; Frewer, L.J.

2012-01-01

Nanotechnology can be described as an emerging technology and, as has been the case with other emerging technologies such as genetic modification, different socio-psychological factors will potentially influence societal responses to its development and application. These factors will play an

Canadian natural gas winter 2005-06 outlook

International Nuclear Information System (INIS)

2005-11-01

An outline of the Canadian natural gas commodity market was presented along with an outlook for Canadian natural gas supply and prices for the winter heating season of 2005-2006. In Canada, the level of natural gas production is much higher than domestic consumption. In 2004, Canadian natural gas production was 16.9 billion cubic feet per day (Bcf/d), while domestic consumption was much lower at 8.2 Bcf/d. The United States, whose natural gas consumption is higher than production, imported about 16 per cent of its natural gas supply from Canada and 3 per cent from other countries via liquefied natural gas imports. Canadian natural gas exports to the United States in 2004 was 8.7 Bcf/d, representing 51 per cent of Canada's production. In Canada, the most important natural gas commodity markets that determine natural gas commodity prices include the intra-Alberta market and the market at the Dawn, Ontario natural gas hub. A well connected pipeline infrastructure connects the natural gas commodity markets in Canada and the United States, allowing supply and demand fundamentals to be transferred across all markets. As such, the integrated natural gas markets in both countries influence the demand, supply and price of natural gas. Canadian natural gas production doubled from 7 to 16.6 Bcf/d between 1986 and 2001. However, in the past 3 years, production from western Canada has leveled out despite record high drilling activity. This can be attributed to declining conventional reserves and the need to find new natural gas in smaller and lower-quality reservoirs. The combination of steady demand growth with slow supply growth has resulted in high natural gas prices since the beginning of 2004. In particular, hurricane damage in August 2005 disrupted natural gas production in the Gulf of Mexico's offshore producing region, shutting-in nearly 9 Bcf/d at the height of damage. This paper summarized some of the key factors that influence natural gas market and prices, with

Effects of structural characteristics on the productivity of shale gas wells: A case study on the Jiaoshiba Block in the Fuling shale gasfield, Sichuan Basin

Directory of Open Access Journals (Sweden)

Ming Hu

2018-03-01

Full Text Available For the sake of figuring out the influential mechanisms of structural characteristics on the productivity of shale gas wells, the structural characteristics of the Jiaoshiba Block in the Fuling shale gasfield, Sichuan Basin, were analyzed. Then, based on well test data of more than 190 horizontal wells, the effects of structures on shale gas well productivity were discussed systematically, and the main structural factors of different structural units in the Jiaoshiba Block that influence the productivity of shale gas wells were clarified. The following results were obtained. First, the structural units in the Jiaoshiba Block were obviously different in structural characteristics and their deformation strength is different. Second, the influence of structural characteristics on shale gas well productivity is directly manifested in gas-bearing property and fracturing effect. The stronger the structural deformation and the more developed the large faults and natural fractures, the more easily shale gas escapes and the poorer the gas bearing property will be, and vice versa. Third, The stronger the structural deformation, the more developed the fractures, the greater the burial depth and the higher the compressive stress of negative structures, the worse the fracturing effect will be, and vice versa. And fourth, Tectonics is the key factor controlling the difference of shale gas productivity between different structural units in the Jiaoshiba Block, but the main structural factors influencing the productivity are different in different structural units. Keywords: Sichuan Basin, Fuling shale gasfield, Jiaoshiba, Shale gas, Structural characteristics, Gas bearing property, Fracturing, Productivity

Application of the FTA and ETA Method for Gas Hazard Identification for the Performance of Safety Systems in the Industrial Department

Science.gov (United States)

Ignac-Nowicka, Jolanta

2018-03-01

The paper analyzes the conditions of safe use of industrial gas systems and factors influencing gas hazards. Typical gas installation and its basic features have been characterized. The results of gas threat analysis in an industrial enterprise using FTA error tree method and ETA event tree method are presented. Compares selected methods of identifying hazards gas industry with respect to the scope of their use. The paper presents an analysis of two exemplary hazards: an industrial gas catastrophe (FTA) and an explosive gas explosion (ETA). In both cases, technical risks and human errors (human factor) were taken into account. The cause-effect relationships of hazards and their causes are presented in the form of diagrams in the drawings.

Design considerations and data for gas-insulated high voltage structures

International Nuclear Information System (INIS)

Hopkins, D.B.

1975-11-01

This paper is intended to benefit the person faced with the occasional task of designing gas insulated high-voltage structures or spark gaps and who must decide upon the proper geometry, spacings, gas type, and pressure for reliable voltage-holding. An approach is presented along with a summary of how various factors affect voltage breakdown. The design procedures described apply to situations where the influence of nearby insulators is negligible. The accuracy of the data is estimated to be within 10 to 15 percent, a value usually attained in practice only when one follows the cautionary advice discussed in the paragraphs on materials preparation, gas properties, and conditioning

Factors Influencing Acceptance Of Contraceptive Methods

Directory of Open Access Journals (Sweden)

Anita Gupta

1997-04-01

Full Text Available Research Problem: What are the factors influencing acceptance of contraceptive methods. Objective: To study the determinants influencing contra­ceptive acceptance. Study design: Population based cross - sectional study. Setting: Rural area of East Delhi. Participants: Married women in the reproductive age group. Sample:Stratified sampling technique was used to draw the sample. Sample Size: 328 married women of reproductive age group. Study Variables: Socio-economic status, Type of contraceptive, Family size, Male child. Outcome Variables: Acceptance of contraceptives Statistical Analysis: By proportions. Result: Prevalence of use of contraception at the time of data collection was 40.5%. Tubectomy and vasectomy were most commonly used methods. (59.4%, n - 133. Educational status of the women positively influenced the contraceptive acceptance but income did not. Desire for more children was single most important deterrent for accepting contraception. Recommendations: (i             Traditional method of contraception should be given more attention. (ii            Couplesshould be brought in the contraceptive use net at the early stage of marriage.

Influencing Factors of the Initiation Point in the Parachute-Bomb Dynamic Detonation System

Science.gov (United States)

Qizhong, Li; Ye, Wang; Zhongqi, Wang; Chunhua, Bai

2017-12-01

The parachute system has been widely applied in modern armament design, especially for the fuel-air explosives. Because detonation of fuel-air explosives occurs during flight, it is necessary to investigate the influences of the initiation point to ensure successful dynamic detonation. In fact, the initiating position exist the falling area in the fuels, due to the error of influencing factors. In this paper, the major influencing factors of initiation point were explored with airdrop and the regularity between initiation point area and factors were obtained. Based on the regularity, the volume equation of initiation point area was established to predict the range of initiation point in the fuel. The analysis results showed that the initiation point appeared area, scattered on account of the error of attitude angle, secondary initiation charge velocity, and delay time. The attitude angle was the major influencing factors on a horizontal axis. On the contrary, secondary initiation charge velocity and delay time were the major influencing factors on a horizontal axis. Overall, the geometries of initiation point area were sector coupled with the errors of the attitude angle, secondary initiation charge velocity, and delay time.

Agricultural demands for natural gas and liquified petroleum gas in the USA

International Nuclear Information System (INIS)

Uri, N.D.; Gill, M.

1992-01-01

This study endeavours to determine whether farmers adjust their consumption of natural gas and liquefied petroleum gas in response to changes in the unit price of energy. A demand model is specified and estimated. The conclusions suggest that the unit price of natural gas (liquefied petroleum gas) is a factor impacting the quantity of natural gas (liquefied petroleum gas) demanded by farmers, but there is no indication that other types of energy are substitutes for natural gas or liquefied petroleum gas. Additionally, the number of acres irrigated is an important factor driving the demand for natural gas and liquefied petroleum gas. Finally, the estimated models of natural gas and liquefied petroleum gas demand were structurally stable over the period 1971-1989. (author)

Economical assessment of the design, construction and operation of open-bed biofilters for waste gas treatment.

Science.gov (United States)

Prado, O J; Gabriel, D; Lafuente, J

2009-06-01

A protocol was developed with the purpose of assessing the main costs implied in the set-up, operation and maintenance of a waste gas-treating conventional biofilter. The main operating parameters considered in the protocol were the empty bed residence time and the gas flow rate. A wide variety of investment and operating costs were considered. In order to check its reliability, the protocol was applied to a number of scenarios, with biofilter volumes ranging from 8.3 to 4000 m(3). Results show that total annualized costs were between 20,000 and 220,000 euro/year and directly dependent, among other factors, on the size of the system. Total investment and operating costs for average-size compost biofilters were around 60,000 euro and 20,000 euro/year, respectively, which are concordant with actual costs. Also, a sensitivity analysis was performed in order to assess the relative influence of a series of selected costs. Results prove that operating costs are those that influence the total annual costs to a higher extent. Also, packing material replacement costs contribute significantly to the total yearly costs in biofilters with a volume higher than 800 m(3). Among operating costs, the electricity consumption is the main influencing factor in biofilters with a gas flow rate above 50,000 m(3)/h, while labor costs are critical at lower gas flow rates. In addition, the use of a variety of packing materials commonly employed in biofiltration was assessed. According to the results obtained, special attention should be paid to the packing material selected, as it is the main parameter influencing the medium replacement costs, and one of the main factors affecting investment costs.

Factors Influencing New Entrant Dairy Farmer's Decision-Making Process around Technology Adoption

Science.gov (United States)

McDonald, Roberta; Heanue, Kevin; Pierce, Karina; Horan, Brendan

2016-01-01

Purpose: The aims of this paper are to (1) evaluate the main factors influencing grazing system technology adoption among new entrant (NE) dairy farmers within Europe and the Irish pasture-based dairy industry, and (2) to determine the extent to which economic factors influence decision-making around technology adoption and use among NEs to the…

Factors Influencing Choice of Inguinal Hernia Repair Technique ...

African Journals Online (AJOL)

Background: Inguinal hernia repair surgery is one of the most frequently performed surgical procedures worldwide. This study sought to highlight factors that may influence decisions concerning inguinal hernia repair techniques. Methods: This descriptive crosssectional study was carried out in September 2014 among ...

Influence of Sociodemographic Factors on Job Burnout and ...

African Journals Online (AJOL)

Influence of Sociodemographic Factors on Job Burnout and Satisfaction among ... (ii) female medical personnel showed significantly greater degree of job satisfaction than ... level of job satisfaction than older employees and, (iv) married employees found significantly more job satisfaction than their unmarried counterparts.

Experimental studies on hydrogen isotopic deuterium from gas to liquid phase by catalytic exchange

International Nuclear Information System (INIS)

Luo Yangming; Wang Heyi; Liu Jun; Fu Zhonghua; Wang Changbin; Han Jun; Xia Xiulong; Tang Lei

2005-01-01

The experimental studies on hydrogen isotopic deuterium from gas to liquid phase were completed by mixed ratio 1:4 of Pt-SDB hydrophobic catalyst and hydrophilic packing. The influencing factors on number of transfer units (NTU) and transformation efficiencies of deuterium were researched. The results show that preferable NTU can be obtained by choosing suitable operational temperature and flux of exchange gas. The transformation rate increases with increasing liquid flux, but it cannot obviously be improved when liquid flux attains some level. The length of catalytic column has an obvious influence on transformation rate and 90% of transformation rate is obtained by 4 m column length at gas flux with 2 m 3 /h, liquid flux with 1-2 kg/h and 45 degree C. (author)

Logistic Regression and Path Analysis Method to Analyze Factors influencing Students’ Achievement

Science.gov (United States)

Noeryanti, N.; Suryowati, K.; Setyawan, Y.; Aulia, R. R.

2018-04-01

Students' academic achievement cannot be separated from the influence of two factors namely internal and external factors. The first factors of the student (internal factors) consist of intelligence (X1), health (X2), interest (X3), and motivation of students (X4). The external factors consist of family environment (X5), school environment (X6), and society environment (X7). The objects of this research are eighth grade students of the school year 2016/2017 at SMPN 1 Jiwan Madiun sampled by using simple random sampling. Primary data are obtained by distributing questionnaires. The method used in this study is binary logistic regression analysis that aims to identify internal and external factors that affect student’s achievement and how the trends of them. Path Analysis was used to determine the factors that influence directly, indirectly or totally on student’s achievement. Based on the results of binary logistic regression, variables that affect student’s achievement are interest and motivation. And based on the results obtained by path analysis, factors that have a direct impact on student’s achievement are students’ interest (59%) and students’ motivation (27%). While the factors that have indirect influences on students’ achievement, are family environment (97%) and school environment (37).

Influence of in-service degradation on strain localization in steel of main gas pipelines

OpenAIRE

Maruschak, Pavlo; Bishchak, Roman; Panin, Sergey Viktorovich; Pylypenko, Andriy; Menou, Abdellah; Danyliuk, Iryna

2014-01-01

General regularities in the failure kinetics of steel of main gas pipelines (17GS) are established using the method of complete stress-strain curves, meanwhile in-service degradation of metals is taken into account. The influence of material degradation on material properties under static tensioning is considered using two independent approaches: the phenomenological model of damage accumulation in metals, and the fractographic analysis method. The accumulation of in-service damage is found t...

An empirical investigation on factors influencing on brand loyalty

Directory of Open Access Journals (Sweden)

Naser Azad

2013-07-01

Full Text Available Building a competitive brand is a key success specially in banking industry. This paper presents a study to investigate important factors influencing brand loyalty among special customers in one of biggest Iranian banks in Iran. The study designs a questionnaire and distributes it among 249 regular customers who are special customers in various banks in city of Tehran, Iran. The study uses structural equation modeling to find important factors and they are ranked using TOPSIS method. In our study, Cronbach alpha has been calculated as 0.815 and there are eight influencing factors including flexibility in offering various services, building good relationship with customers, technology and processes, customers’ experiences, brand identity in continuous advertisement, organization size, customer perception on reputation of brand and customers’ tendency to build better brand loyalty. In our survey, flexibility in offering various services received the highest rank followed by building good relationship with customers.

Emergency Department Crowding: Factors Influencing Flow

OpenAIRE

Arkun, Alp; Briggs, William M; Patel, Sweha; Datillo, Paris A; Bove, Joseph; Birkhahn, Robert H

2010-01-01

Background: The objective of this study was to evaluate those factors, both intrinsic and extrinsic to the emergency department (ED) that influence two specific components of throughput: “door-to-doctor” time and dwell time. Methods: We used a prospective observational study design to determine the variables that played a significant role in determining ED flow. All adult patients seen or waiting to be seen in the ED were observed at 8pm (Monday-Friday) during a three-month period. V...

The influence of polymeric membrane gas spargers on hydrodynamics and mass transfer in bubble column bioreactors.