WorldWideScience

Sample records for factorial experiment design

  1. Designing fractional factorial split-plot experiments using integer programming

    DEFF Research Database (Denmark)

    Capehart, Shay R.; Keha, Ahmet; Kulahci, Murat

    2011-01-01

    factorial (FF) design, with the restricted randomisation structure to account for the whole plots and subplots. We discuss the formulation of FFSP designs using integer programming (IP) to achieve various design criteria. We specifically look at the maximum number of clear two-factor interactions...

  2. Designing fractional factorial split-plot experiments using integer programming

    DEFF Research Database (Denmark)

    Capehart, Shay R.; Keha, Ahmet; Kulahci, Murat

    2011-01-01

    factorial (FF) design, with the restricted randomisation structure to account for the whole plots and subplots. We discuss the formulation of FFSP designs using integer programming (IP) to achieve various design criteria. We specifically look at the maximum number of clear two-factor interactions...

  3. Fractional Factorial Design for Parameter Sweep Experiments Using Nimrod/E

    Directory of Open Access Journals (Sweden)

    T.C. Peachey

    2008-01-01

    Full Text Available The techniques of formal experimental design and analysis are powerful tools for scientists and engineers. However, these techniques are currently underused for experiments conducted with computer models. This has motivated the incorporation of experimental design functionality into the Nimrod tool chain. Nimrod has been extensively used for exploration of the response of models to their input parameters; the addition of experimental design tools will combine the efficiency of carefully designed experiments with the power of distributed execution. This paper describes the incorporation of one type of design, the fractional factorial design, and associated analysis tools, into the Nimrod framework. The result provides a convenient environment that automates the design of an experiment, the execution of the jobs on a computational grid and the return of results, and which assists in the interpretation of those results. Several case studies are included which demonstrate various aspects of this approach.

  4. Design of Experiments with Multiple Independent Variables: A Resource Management Perspective on Complete and Reduced Factorial Designs

    Science.gov (United States)

    Collins, Linda M.; Dziak, John J.; Li, Runze

    2009-01-01

    An investigator who plans to conduct an experiment with multiple independent variables must decide whether to use a complete or reduced factorial design. This article advocates a resource management perspective on making this decision, in which the investigator seeks a strategic balance between service to scientific objectives and economy.…

  5. Factorial and time course designs for cDNA microarray experiments.

    Science.gov (United States)

    Glonek, G F V; Solomon, P J

    2004-01-01

    Microarrays are powerful tools for surveying the expression levels of many thousands of genes simultaneously. They belong to the new genomics technologies which have important applications in the biological, agricultural and pharmaceutical sciences. There are myriad sources of uncertainty in microarray experiments, and rigorous experimental design is essential for fully realizing the potential of these valuable resources. Two questions frequently asked by biologists on the brink of conducting cDNA or two-colour, spotted microarray experiments are 'Which mRNA samples should be competitively hybridized together on the same slide?' and 'How many times should each slide be replicated?' Early experience has shown that whilst the field of classical experimental design has much to offer this emerging multi-disciplinary area, new approaches which accommodate features specific to the microarray context are needed. In this paper, we propose optimal designs for factorial and time course experiments, which are special designs arising quite frequently in microarray experimentation. Our criterion for optimality is statistical efficiency based on a new notion of admissible designs; our approach enables efficient designs to be selected subject to the information available on the effects of most interest to biologists, the number of arrays available for the experiment, and other resource or practical constraints, including limitations on the amount of mRNA probe. We show that our designs are superior to both the popular reference designs, which are highly inefficient, and to designs incorporating all possible direct pairwise comparisons. Moreover, our proposed designs represent a substantial practical improvement over classical experimental designs which work in terms of standard interactions and main effects. The latter do not provide a basis for meaningful inference on the effects of most interest to biologists, nor make the most efficient use of valuable and limited resources.

  6. Assessment of the recycling potential of fresh concrete waste using a factorial design of experiments.

    Science.gov (United States)

    Correia, S L; Souza, F L; Dienstmann, G; Segadães, A M

    2009-11-01

    Recycling of industrial wastes and by-products can help reduce the cost of waste treatment prior to disposal and eventually preserve natural resources and energy. To assess the recycling potential of a given waste, it is important to select a tool capable of giving clear indications either way, with the least time and work consumption, as is the case of modelling the system properties using the results obtained from statistical design of experiments. In this work, the aggregate reclaimed from the mud that results from washout and cleaning operations of fresh concrete mixer trucks (fresh concrete waste, FCW) was recycled into new concrete with various water/cement ratios, as replacement of natural fine aggregates. A 3(2) factorial design of experiments was used to model fresh concrete consistency index and hardened concrete water absorption and 7- and 28-day compressive strength, as functions of FCW content and water/cement ratio, and the resulting regression equations and contour plots were validated with confirmation experiments. The results showed that the fresh concrete workability worsened with the increase in FCW content but the water absorption (5-10 wt.%), 7-day compressive strength (26-36 MPa) and 28-day compressive strength (32-44 MPa) remained within the specified ranges, thus demonstrating that the aggregate reclaimed from FCW can be recycled into new concrete mixtures with lower natural aggregate content.

  7. Statistical analysis of efficient unbalanced factorial designs for two-color microarray experiments.

    Science.gov (United States)

    Tempelman, Robert J

    2008-01-01

    Experimental designs that efficiently embed a fixed effects treatment structure within a random effects design structure typically require a mixed-model approach to data analyses. Although mixed model software tailored for the analysis of two-color microarray data is increasingly available, much of this software is generally not capable of correctly analyzing the elaborate incomplete block designs that are being increasingly proposed and used for factorial treatment structures. That is, optimized designs are generally unbalanced as it pertains to various treatment comparisons, with different specifications of experimental variability often required for different treatment factors. This paper uses a publicly available microarray dataset, as based upon an efficient experimental design, to demonstrate a proper mixed model analysis of a typical unbalanced factorial design characterized by incomplete blocks and hierarchical levels of variability.

  8. Optimization of a chondrogenic medium through the use of factorial design of experiments.

    Science.gov (United States)

    Enochson, Lars; Brittberg, Mats; Lindahl, Anders

    2012-12-01

    The standard culture system for in vitro cartilage research is based on cells in a three-dimensional micromass culture and a defined medium containing the chondrogenic key growth factor, transforming growth factor (TGF)-β1. The aim of this study was to optimize the medium for chondrocyte micromass culture. Human chondrocytes were cultured in different media formulations, designed with a factorial design of experiments (DoE) approach and based on the standard medium for redifferentiation. The significant factors for the redifferentiation of the chondrocytes were determined and optimized in a two-step process through the use of response surface methodology. TGF-β1, dexamethasone, and glucose were significant factors for differentiating the chondrocytes. Compared to the standard medium, TGF-β1 was increased 30%, dexamethasone reduced 50%, and glucose increased 22%. The potency of the optimized medium was validated in a comparative study against the standard medium. The optimized medium resulted in micromass cultures with increased expression of genes important for the articular chondrocyte phenotype and in cultures with increased glycosaminoglycan/DNA content. Optimizing the standard medium with the efficient DoE method, a new medium that gave better redifferentiation for articular chondrocytes was determined.

  9. Understanding the Seed-Mediated Growth of Gold Nanorods through a Fractional Factorial Design of Experiments.

    Science.gov (United States)

    Burrows, Nathan D; Harvey, Samantha; Idesis, Fred A; Murphy, Catherine J

    2017-02-28

    Since the development of simple, aqueous protocols for the synthesis of anisotropic metal nanoparticles, research into many promising, valuable applications of gold nanorods has grown considerably, but a number of challenges remain, including gold-particle yield, robustness to minor impurities, and precise control of gold nanorod surface chemistry. Herein we present the results of a composite fractional factorial series of experiments designed to screen seven additional potential avenues of control and to understand the seed-mediated silver-assisted synthesis of gold nanorods. These synthesis variables are the amount of sodium borohydride used and the rate of stirring when producing seed nanoparticles, the age of and the amount of seeds added, the reaction temperature, the amounts of silver nitrate and ascorbic acid added, and the age of the reduced growth solution before seed nanoparticles are added to initiate rod formation. This statistical experimental design and analysis method, besides determining which experimental variables are important and which are not when synthesizing gold nanorods (and quantifying their effects), gives further insight into the mechanism of growth by measuring the degree to which variables interact with each other by mapping out their mechanistic connections. This work demonstrates that when forming gold nanorods by the reduction of auric ions by ascorbic acid onto seed nanoparticles, ascorbic acid determines how much gold is reduced, and the amount of seeds determine how it is divided, yet both influence the intrinsic growth rates, in both width and length, of the forming nanorods. Furthermore, this work shows that the reduction of gold proceeds via direct reduction on the surface of seeds and not through a disproportionation reaction. Further control over the length of gold nanorods can be achieved by tuning the amount of silver nitrate or the reaction temperature. This work shows that silver does not directly influence rod length or

  10. An approach to optimize sample preparation for MALDI imaging MS of FFPE sections using fractional factorial design of experiments.

    Science.gov (United States)

    Oetjen, Janina; Lachmund, Delf; Palmer, Andrew; Alexandrov, Theodore; Becker, Michael; Boskamp, Tobias; Maass, Peter

    2016-09-01

    A standardized workflow for matrix-assisted laser desorption/ionization imaging mass spectrometry (MALDI imaging MS) is a prerequisite for the routine use of this promising technology in clinical applications. We present an approach to develop standard operating procedures for MALDI imaging MS sample preparation of formalin-fixed and paraffin-embedded (FFPE) tissue sections based on a novel quantitative measure of dataset quality. To cover many parts of the complex workflow and simultaneously test several parameters, experiments were planned according to a fractional factorial design of experiments (DoE). The effect of ten different experiment parameters was investigated in two distinct DoE sets, each consisting of eight experiments. FFPE rat brain sections were used as standard material because of low biological variance. The mean peak intensity and a recently proposed spatial complexity measure were calculated for a list of 26 predefined peptides obtained by in silico digestion of five different proteins and served as quality criteria. A five-way analysis of variance (ANOVA) was applied on the final scores to retrieve a ranking of experiment parameters with increasing impact on data variance. Graphical abstract MALDI imaging experiments were planned according to fractional factorial design of experiments for the parameters under study. Selected peptide images were evaluated by the chosen quality metric (structure and intensity for a given peak list), and the calculated values were used as an input for the ANOVA. The parameters with the highest impact on the quality were deduced and SOPs recommended.

  11. Compatible validated spectrofluorimetric and spectrophotometric methods for determination of vildagliptin and saxagliptin by factorial design experiments

    Science.gov (United States)

    Abdel-Aziz, Omar; Ayad, Miriam F.; Tadros, Mariam M.

    2015-04-01

    Simple, selective and reproducible spectrofluorimetric and spectrophotometric methods have been developed for the determination of vildagliptin and saxagliptin in bulk and their pharmaceutical dosage forms. The first proposed spectrofluorimetric method is based on the dansylation reaction of the amino group of vildagliptin with dansyl chloride to form a highly fluorescent product. The formed product was measured spectrofluorimetrically at 455 nm after excitation at 345 nm. Beer's law was obeyed in a concentration range of 100-600 μg ml-1. The second proposed spectrophotometric method is based on the charge transfer complex of saxagliptin with tetrachloro-1,4-benzoquinone (p-chloranil). The formed charge transfer complex was measured spectrophotometrically at 530 nm. Beer's law was obeyed in a concentration range of 100-850 μg ml-1. The third proposed spectrophotometric method is based on the condensation reaction of the primary amino group of saxagliptin with formaldehyde and acetyl acetone to form a yellow colored product known as Hantzsch reaction, measured at 342.5 nm. Beer's law was obeyed in a concentration range of 50-300 μg ml-1. All the variables were studied to optimize the reactions' conditions using factorial design. The developed methods were validated and proved to be specific and accurate for quality control of vildagliptin and saxagliptin in their pharmaceutical dosage forms.

  12. Multiple Segment Factorial Vignette Designs

    Science.gov (United States)

    Ganong, Lawrence H.; Coleman, Marilyn

    2006-01-01

    The multiple segment factorial vignette design (MSFV) combines elements of experimental designs and probability sampling with the inductive, exploratory approach of qualitative research. MSFVs allow researchers to investigate topics that may be hard to study because of ethical or logistical concerns. Participants are presented with short stories…

  13. Multiple Segment Factorial Vignette Designs

    Science.gov (United States)

    Ganong, Lawrence H.; Coleman, Marilyn

    2006-01-01

    The multiple segment factorial vignette design (MSFV) combines elements of experimental designs and probability sampling with the inductive, exploratory approach of qualitative research. MSFVs allow researchers to investigate topics that may be hard to study because of ethical or logistical concerns. Participants are presented with short stories…

  14. Application of multi-factorial design of experiments to successfully optimize immunoassays for robust measurements of therapeutic proteins.

    Science.gov (United States)

    Ray, Chad A; Patel, Vimal; Shih, Judy; Macaraeg, Chris; Wu, Yuling; Thway, Theingi; Ma, Mark; Lee, Jean W; Desilva, Binodh

    2009-02-20

    Developing a process that generates robust immunoassays that can be used to support studies with tight timelines is a common challenge for bioanalytical laboratories. Design of experiments (DOEs) is a tool that has been used by many industries for the purpose of optimizing processes. The approach is capable of identifying critical factors and their interactions with a minimal number of experiments. The challenge for implementing this tool in the bioanalytical laboratory is to develop a user-friendly approach that scientists can understand and apply. We have successfully addressed these challenges by eliminating the screening design, introducing automation, and applying a simple mathematical approach for the output parameter. A modified central composite design (CCD) was applied to three ligand binding assays. The intra-plate factors selected were coating, detection antibody concentration, and streptavidin-HRP concentrations. The inter-plate factors included incubation times for each step. The objective was to maximize the logS/B (S/B) of the low standard to the blank. The maximum desirable conditions were determined using JMP 7.0. To verify the validity of the predictions, the logS/B prediction was compared against the observed logS/B during pre-study validation experiments. The three assays were optimized using the multi-factorial DOE. The total error for all three methods was less than 20% which indicated method robustness. DOE identified interactions in one of the methods. The model predictions for logS/B were within 25% of the observed pre-study validation values for all methods tested. The comparison between the CCD and hybrid screening design yielded comparable parameter estimates. The user-friendly design enables effective application of multi-factorial DOE to optimize ligand binding assays for therapeutic proteins. The approach allows for identification of interactions between factors, consistency in optimal parameter determination, and reduced method

  15. Design, manufacture and factory testing of the Ion Source and Extraction Power Supplies for the SPIDER experiment

    Energy Technology Data Exchange (ETDEWEB)

    Bigi, Marco, E-mail: marco.bigi@igi.cnr.it [Consorzio RFX (CNR, ENEA, INFN, Università di Padova, Acciaierie Venete SpA), Corso Stati Uniti 4, 35127 Padova (Italy); Rinaldi, Luigi [OCEM Energy Technology, Via della Solidarietà 2/1, 40056 Valsamoggia (località Crespellano), Bologna (Italy); Simon, Muriel [Fusion for Energy, Josep Pla 2, 08019 Barcelona (Spain); Sita, Luca; Taddia, Giuseppe; Carrozza, Saverino [OCEM Energy Technology, Via della Solidarietà 2/1, 40056 Valsamoggia (località Crespellano), Bologna (Italy); Decamps, Hans [ITER Organization, Route de Vinon sur Verdon, 13115 Saint Paul lez Durance (France); Luchetta, Adriano [Consorzio RFX (CNR, ENEA, INFN, Università di Padova, Acciaierie Venete SpA), Corso Stati Uniti 4, 35127 Padova (Italy); Meddour, Abdelraouf [HIMMELWERK Hoch- und Mittelfrequenzanlagen GmbH, Jopestr. 10, 72072 Tübingen (Germany); Moressa, Modesto [Consorzio RFX (CNR, ENEA, INFN, Università di Padova, Acciaierie Venete SpA), Corso Stati Uniti 4, 35127 Padova (Italy); Morri, Cristiano; Musile Tanzi, Antonio [OCEM Energy Technology, Via della Solidarietà 2/1, 40056 Valsamoggia (località Crespellano), Bologna (Italy); Recchia, Mauro [Consorzio RFX (CNR, ENEA, INFN, Università di Padova, Acciaierie Venete SpA), Corso Stati Uniti 4, 35127 Padova (Italy); Wagner, Uwe [HIMMELWERK Hoch- und Mittelfrequenzanlagen GmbH, Jopestr. 10, 72072 Tübingen (Germany); Zamengo, Andrea; Toigo, Vanni [Consorzio RFX (CNR, ENEA, INFN, Università di Padova, Acciaierie Venete SpA), Corso Stati Uniti 4, 35127 Padova (Italy)

    2015-10-15

    Highlights: • 5 MVA ion source power supplies effectively integrated in 150 m{sup 2} Faraday cage. • Load protection and performance requirements met of custom design high voltage power supplies. • 200 kW tetrode oscillator with 200 kHz frequency range successfully tested. - Abstract: The SPIDER experiment, currently under construction at the Neutral Beam Test Facility in Padua, Italy, is a full-size prototype of the ion source for the ITER Neutral Beam Injectors. The Ion Source and Extraction Power Supplies (ISEPS) for SPIDER are supplied by OCEM Energy Technology s.r.l. (OCEM) under a procurement contract with Fusion for Energy (F4E) covering also the units required for MITICA and ITER injectors. The detailed design of SPIDER ISEPS was finalized in 2011 and manufacture of most components completed by end 2013. The Factory Acceptance Tests took place early 2014. ISEPS, with an overall power rating of 5 MVA, form a heterogeneous set of items including solid state power converters and 1 MHz radiofrequency generators of 200 kW output power. The paper presents the main features of the detailed design developed by OCEM, focusing in particular on the high output voltage pulse step modulators, the high output current resonant converters, the radiofrequency generators by HIMMELWERK GmbH and the architecture and implementation of the complex control system. Details are given on non-standard factory tests verifying the insulation requirements specific to this application. Performance of ISEPS during the factory acceptance tests is described, with emphasis on demonstration of the load protection requirements, a crucial point for all neutral beam power supplies. Finally, key dates of SPIDER ISEPS installation and site testing schedule are provided.

  16. Improved Hyperspectral Image Testing Using Synthetic Imagery and Factorial Designed Experiments

    Science.gov (United States)

    2007-03-01

    Mendenhall, and Scheaffer , fully detail the designing of experiments in their respective texts. For purposes of this thesis, a simplified explanation of...Air Force Institute of Technology (AU), Wright-Patterson AFB OH, March 2007. Wackerly, Dennis D., William Mendenhall, and Richard L. Scheaffer

  17. Handbook factory planning and design

    CERN Document Server

    Wiendahl, Hans-Peter; Nyhuis, Peter

    2015-01-01

    This handbook introduces a methodical approach and pragmatic concept for the planning and design of changeable factories that act in strategic alliances to supply the ever-changing needs of the global market. In the first part, the change drivers of manufacturing enterprises and the resulting new challenges are considered in detail with focus on an appropriate change potential. The second part concerns the design of the production facilities and systems on the factory levels work place, section, building and site under functional, organisational, architectural and strategic aspects keeping in mind the environmental, health and safety aspects including corporate social responsibility. The third part is dedicated to the planning and design method that is based on a synergetic interaction of process and space. The accompanying project management of the planning and construction phase and the facility management for the effective utilization of the built premises close the book. -        Concise overview o...

  18. Characterization of a Solid Oxide Fuel Cell Gas Turbine Hybrid System Based on a Factorial Design of Experiments Using Hardware Simulation

    Energy Technology Data Exchange (ETDEWEB)

    Restrepo, Bernardo; Banta, Larry E; Tucker, David

    2012-10-01

    A full factorial experimental design and a replicated fractional factorial design were carried out using the Hybrid Performance (HyPer) project facility installed at the National Energy Technology Laboratory (NETL), U.S. Department of Energy to simulate gasifer/fuel cell/turbine hybrid power systems. The HyPer facility uses hardware in the loop (HIL) technology that couples a modified recuperated gas turbine cycle with hardware driven by a solid oxide fuel cell model. A 34 full factorial design (FFD) was selected to study the effects of four factors: cold-air, hot-air, bleed-air bypass valves, and the electric load on different parameters such as cathode and turbine inlet temperatures, pressure and mass flow. The results obtained, compared with former results where the experiments were made using one-factor-at-a-time (OFAT), show that no strong interactions between the factors are present in the different parameters of the system. This work also presents a fractional factorial design (ffd) 34-2 in order to analyze replication of the experiments. In addition, a new envelope is described based on the results of the design of experiments (DoE), compared with OFAT experiments, and analyzed in an off-design integrated fuel cell/gas turbine framework. This paper describes the methodology, strategy, and results of these experiments that bring new knowledge concerning the operating state space for this kind of power generation system.

  19. Modelling aluminium leaching into food from different foodware materials with multi-level factorial design of experiments.

    Science.gov (United States)

    Fekete, Veronika; Deconinck, Eric; Bolle, Fabien; Van Loco, Joris

    2012-08-01

    To estimate the contribution of aluminium (Al) leaching from different materials used for food preparation and serving to the dietary Al intake, Al release from foodware typically used in everyday life was investigated using multilevel factorial design (MFD) of experiments. For Al characterisation, sample preparation and an analytical method using inductively coupled plasma atomic emission spectroscopy was developed and validated. Parameter influence (temperature: x₁, contact time: x₂, pH: x₃, salt concentration: x₄, viscosity: x₅), was evaluated with analysis of variance suggesting that the influence of viscosity is not significant compared to the other four studied parameters. Therefore, predictive, exponential quadratic regression models were established with x₁-x₄. Cross-validation and a set of independent experiments in real food products were used to test the prediction force of the different models. They both suggest that the quality of the models established for Al foil, Al plate and ceramic ware is satisfactory, but less good for glassware and stainless steel. Indeed, in the studied conditions, leaching from these latter food wares was often close to or even below the limit of quantification suggesting that the principal sources of Al intake from food contact materials during food processing are utensils made of Al and ceramic ware.

  20. Testing Nelder-Mead based repulsion algorithms for multiple roots of nonlinear systems via a two-level factorial design of experiments.

    Directory of Open Access Journals (Sweden)

    Gisela C V Ramadas

    Full Text Available This paper addresses the challenging task of computing multiple roots of a system of nonlinear equations. A repulsion algorithm that invokes the Nelder-Mead (N-M local search method and uses a penalty-type merit function based on the error function, known as 'erf', is presented. In the N-M algorithm context, different strategies are proposed to enhance the quality of the solutions and improve the overall efficiency. The main goal of this paper is to use a two-level factorial design of experiments to analyze the statistical significance of the observed differences in selected performance criteria produced when testing different strategies in the N-M based repulsion algorithm. The main goal of this paper is to use a two-level factorial design of experiments to analyze the statistical significance of the observed differences in selected performance criteria produced when testing different strategies in the N-M based repulsion algorithm.

  1. Testing Nelder-Mead based repulsion algorithms for multiple roots of nonlinear systems via a two-level factorial design of experiments.

    Science.gov (United States)

    Ramadas, Gisela C V; Rocha, Ana Maria A C; Fernandes, Edite M G P

    2015-01-01

    This paper addresses the challenging task of computing multiple roots of a system of nonlinear equations. A repulsion algorithm that invokes the Nelder-Mead (N-M) local search method and uses a penalty-type merit function based on the error function, known as 'erf', is presented. In the N-M algorithm context, different strategies are proposed to enhance the quality of the solutions and improve the overall efficiency. The main goal of this paper is to use a two-level factorial design of experiments to analyze the statistical significance of the observed differences in selected performance criteria produced when testing different strategies in the N-M based repulsion algorithm. The main goal of this paper is to use a two-level factorial design of experiments to analyze the statistical significance of the observed differences in selected performance criteria produced when testing different strategies in the N-M based repulsion algorithm.

  2. The Experiment Factory: standardizing behavioral experiments

    Directory of Open Access Journals (Sweden)

    Vanessa V Sochat

    2016-04-01

    Full Text Available The administration of behavioral and experimental paradigms for psychology research is hindered by lack of a coordinated effort to develop and deploy standardized paradigms. While several frameworks (de Leeuw (2015; McDonnell et al. (2012; Mason and Suri (2011; Lange et al. (2015 have provided infrastructure and methods for individual research groups to develop paradigms, missing is a coordinated effort to develop paradigms linked with a system to easily deploy them. This disorganization leads to redundancy in development, divergent implementations of conceptually identical tasks, disorganized and error-prone code lacking documentation, and difficulty in replication. The ongoing reproducibility crisis in psychology and neuroscience research (Baker (2015; Open Science Collaboration (2015 highlights the urgency of this challenge: reproducible research in behavioral psychology is conditional on deployment of equivalent experiments. A large, accessible repository of experiments for researchers to develop collaboratively is most efficiently accomplished through an open source framework. Here we present the Experiment Factory, an open source framework for the development and deployment of web-based experiments. The modular infrastructure includes experiments, virtual machines for local or cloud deployment, and an application to drive these components and provide developers with functions and tools for further extension. We release this infrastructure with a deployment (http://www.expfactory.org that researchers are currently using to run a set of over 80 standardized web-based experiments on Amazon Mechanical Turk. By providing open source tools for both deployment and development, this novel infrastructure holds promise to bring reproducibility to the administration of experiments, and accelerate scientific progress by providing a shared community resource of psychological paradigms.

  3. The Experiment Factory: Standardizing Behavioral Experiments

    Science.gov (United States)

    Sochat, Vanessa V.; Eisenberg, Ian W.; Enkavi, A. Zeynep; Li, Jamie; Bissett, Patrick G.; Poldrack, Russell A.

    2016-01-01

    The administration of behavioral and experimental paradigms for psychology research is hindered by lack of a coordinated effort to develop and deploy standardized paradigms. While several frameworks (Mason and Suri, 2011; McDonnell et al., 2012; de Leeuw, 2015; Lange et al., 2015) have provided infrastructure and methods for individual research groups to develop paradigms, missing is a coordinated effort to develop paradigms linked with a system to easily deploy them. This disorganization leads to redundancy in development, divergent implementations of conceptually identical tasks, disorganized and error-prone code lacking documentation, and difficulty in replication. The ongoing reproducibility crisis in psychology and neuroscience research (Baker, 2015; Open Science Collaboration, 2015) highlights the urgency of this challenge: reproducible research in behavioral psychology is conditional on deployment of equivalent experiments. A large, accessible repository of experiments for researchers to develop collaboratively is most efficiently accomplished through an open source framework. Here we present the Experiment Factory, an open source framework for the development and deployment of web-based experiments. The modular infrastructure includes experiments, virtual machines for local or cloud deployment, and an application to drive these components and provide developers with functions and tools for further extension. We release this infrastructure with a deployment (http://www.expfactory.org) that researchers are currently using to run a set of over 80 standardized web-based experiments on Amazon Mechanical Turk. By providing open source tools for both deployment and development, this novel infrastructure holds promise to bring reproducibility to the administration of experiments, and accelerate scientific progress by providing a shared community resource of psychological paradigms. PMID:27199843

  4. Constructing General Orthogonal Fractional Factorial Split-Plot Designs

    NARCIS (Netherlands)

    Sartono, B.; Goos, P.; Schoen, E.

    2015-01-01

    While the orthogonal design of split-plot fractional factorial experiments has received much attention already, there are still major voids in the literature. First, designs with one or more factors acting at more than two levels have not yet been considered. Second, published work on nonregular fra

  5. Low-energy neutrino factory design

    Directory of Open Access Journals (Sweden)

    C. Ankenbrandt

    2009-07-01

    Full Text Available The design of a low-energy (4 GeV neutrino factory (NF is described, along with its expected performance. The neutrino factory uses a high-energy proton beam to produce charged pions. The π^{±} decay to produce muons (μ^{±}, which are collected, accelerated, and stored in a ring with long straight sections. Muons decaying in the straight sections produce neutrino beams. The scheme is based on previous designs for higher energy neutrino factories, but has an improved bunching and phase rotation system, and new acceleration, storage ring, and detector schemes tailored to the needs of the lower energy facility. Our simulations suggest that the NF scheme we describe can produce neutrino beams generated by ∼1.4×10^{21} μ^{+} per year decaying in a long straight section of the storage ring, and a similar number of μ^{-} decays.

  6. A conceptual design of circular Higgs factory

    Energy Technology Data Exchange (ETDEWEB)

    Cai, Yunhai

    2016-11-30

    Similar to a super B-factory, a circular Higgs factory (CHF) will require strong focusing systems near the interaction points and a low-emittance lattice in the arcs to achieve a factory luminosity. At electron beam energy of 125 GeV, beamstrahlung effects during the collision pose an additional challenge to the collider design. In particular, a large momentum acceptance at the 2% level is necessary to retain an adequate beam lifetime. This turns out to be the most challenging aspect in the design of a CHF. In this paper, an example will be provided to illustrate the beam dynamics in a CHF, emphasizing the chromatic optics. Basic optical modules and advanced analysis will be presented. Most importantly, we will show that 2% momentum aperture is achievable.

  7. Bayesian analysis of factorial designs.

    Science.gov (United States)

    Rouder, Jeffrey N; Morey, Richard D; Verhagen, Josine; Swagman, April R; Wagenmakers, Eric-Jan

    2017-06-01

    This article provides a Bayes factor approach to multiway analysis of variance (ANOVA) that allows researchers to state graded evidence for effects or invariances as determined by the data. ANOVA is conceptualized as a hierarchical model where levels are clustered within factors. The development is comprehensive in that it includes Bayes factors for fixed and random effects and for within-subjects, between-subjects, and mixed designs. Different model construction and comparison strategies are discussed, and an example is provided. We show how Bayes factors may be computed with BayesFactor package in R and with the JASP statistical package. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  8. NEUTRINO FACTORY AND BETA BEAM EXPERIMENTS AND DEVELOPMENT.

    Energy Technology Data Exchange (ETDEWEB)

    ALBRIGHT, C.; BERG, J.S.; FERNOW, R.; GALLARDO, J.; KAHN, S.; KIRK, H.; ET AL.

    2004-09-21

    The long-term prospects for fully exploring three-flavor mixing in the neutrino sector depend upon an ongoing and increased investment in the appropriate accelerator R&D. Two new concepts have been proposed that would revolutionize neutrino experiments, namely the Neutrino Factory and the Beta Beam facility. These new facilities would dramatically improve our ability to test the three-flavor mixing framework, measure CP violation in the lepton sector, and perhaps determine the neutrino mass hierarchy, and, if necessary, probe extremely small values of the mixing angle {theta}{sub 13}. The stunning sensitivity that could be achieved with a Neutrino Factory is described, together with our present understanding of the corresponding sensitivity that might be achieved with a Beta Beam facility. In the Beta Beam case, additional study is required to better understand the optimum Beta Beam energy, and the achievable sensitivity. Neither a Neutrino Factory nor a Beta Beam facility could be built without significant R&D. An impressive Neutrino Factory R&D effort has been ongoing in the U.S. and elsewhere over the last few years and significant progress has been made towards optimizing the design, developing and testing the required accelerator components, and significantly reducing the cost. The recent progress is described here. There has been no corresponding activity in the U.S. on Beta Beam facility design and, given the very limited resources, there is little prospect of starting a significant U.S. Beta Beam R&D effort in the near future. However, the Beta Beam concept is interesting, and progress on its development in Europe should be followed. The Neutrino Factory R&D program has reached a critical stage in which support is required for two crucial international experiments and a third-generation international design study. If this support is forthcoming, a Neutrino Factory could be added to the Neutrino Community's road map in about a decade.

  9. High-gravity brewing utilizing factorial design

    OpenAIRE

    Almeida,R. B.; J. B. Almeida e Silva; Lima,U. A.; Assis,A. N.

    2000-01-01

    A number of factors can influence the behavior of yeast during fermentation. Some of these factors (initial wort concentration, initial pH and percentage of corn syrup in the composition of the wort) were studied in order to determine their influence on the productivity of fermentation. Fermentations were carried out at 25ºC utilizing a 2³ factorial design of these factors. The results showed that the percentage of corn syrup had no influence on process productivity, whereas initial pH and es...

  10. Virtual patients design and its effect on clinical reasoning and student experience: a protocol for a randomised factorial multi-centre study

    Directory of Open Access Journals (Sweden)

    Bateman James

    2012-08-01

    Full Text Available Abstract Background Virtual Patients (VPs are web-based representations of realistic clinical cases. They are proposed as being an optimal method for teaching clinical reasoning skills. International standards exist which define precisely what constitutes a VP. There are multiple design possibilities for VPs, however there is little formal evidence to support individual design features. The purpose of this trial is to explore the effect of two different potentially important design features on clinical reasoning skills and the student experience. These are the branching case pathways (present or absent and structured clinical reasoning feedback (present or absent. Methods/Design This is a multi-centre randomised 2x2 factorial design study evaluating two independent variables of VP design, branching (present or absent, and structured clinical reasoning feedback (present or absent.The study will be carried out in medical student volunteers in one year group from three university medical schools in the United Kingdom, Warwick, Keele and Birmingham. There are four core musculoskeletal topics. Each case can be designed in four different ways, equating to 16 VPs required for the research. Students will be randomised to four groups, completing the four VP topics in the same order, but with each group exposed to a different VP design sequentially. All students will be exposed to the four designs. Primary outcomes are performance for each case design in a standardized fifteen item clinical reasoning assessment, integrated into each VP, which is identical for each topic. Additionally a 15-item self-reported evaluation is completed for each VP, based on a widely used EViP tool. Student patterns of use of the VPs will be recorded. In one centre, formative clinical and examination performance will be recorded, along with a self reported pre and post-intervention reasoning score, the DTI. Our power calculations indicate a sample size of 112 is required for

  11. Flow-based approach for holistic factory engineering and design

    OpenAIRE

    Constantinescu, C.; Westkämper, E.

    2010-01-01

    The engineering of future factories requires digital tools along life cycle phases from investment planning to ramp-up. Manufacturers need scientific-based integrated highly dynamic data management systems for the participative and integrated factory planning. The paper presents a new approach for the continuously integrated product design, factory and process planning, through a service-oriented architecture for the implementation of digital factory tools. A first prototype of the digital fa...

  12. High-gravity brewing utilizing factorial design

    Directory of Open Access Journals (Sweden)

    R. B. Almeida

    2000-06-01

    Full Text Available A number of factors can influence the behavior of yeast during fermentation. Some of these factors (initial wort concentration, initial pH and percentage of corn syrup in the composition of the wort were studied in order to determine their influence on the productivity of fermentation. Fermentations were carried out at 25ºC utilizing a 2³ factorial design of these factors. The results showed that the percentage of corn syrup had no influence on process productivity, whereas initial pH and especially initial wort concentration did. It can be concluded that using pH and initial wort concentration values higher than those utilized in this work (5.5 and 20ºP, respectively will result in a higher productivity.

  13. Connection Among Some Optimal Criteria for Symmetrical Fractional Factorial Designs

    Institute of Scientific and Technical Information of China (English)

    Hong Qin; Ming-yao Ai; Jian-hui Ning

    2005-01-01

    A fundamental and practical question for fractional factorial designs is the issue of optimal factor assignment. Recently, some new criteria, such as generalized minimum aberration, WV-criterion, NB-criterion and uniformity criterion are proposed for comparing and selecting fractions. In this paper, we indicate that these criteria agree quite well for symmetrical fraction factorial designs.

  14. CONFOUNDING STRUCTURE OF TWO-LEVEL NONREGULAR FACTORIAL DESIGNS

    Institute of Scientific and Technical Information of China (English)

    Ren Junbai

    2012-01-01

    In design theory,the alias structure of regular fractional factorial designs is elegantly described with group theory.However,this approach cannot be applied to nonregular designs directly. For an arbitrary nonregular design,a natural question is how to describe the confounding relations between its effects,is there any inner structure similar to regular designs? The aim of this article is to answer this basic question.Using coefficients of indicator function,confounding structure of nonregular fractional factorial designs is obtained as linear constrains on the values of effects.A method to estimate the sparse significant effects in an arbitrary nonregular design is given through an example.

  15. Optimization of minoxidil microemulsions using fractional factorial design approach.

    Science.gov (United States)

    Jaipakdee, Napaphak; Limpongsa, Ekapol; Pongjanyakul, Thaned

    2016-01-01

    The objective of this study was to apply fractional factorial and multi-response optimization designs using desirability function approach for developing topical microemulsions. Minoxidil (MX) was used as a model drug. Limonene was used as an oil phase. Based on solubility, Tween 20 and caprylocaproyl polyoxyl-8 glycerides were selected as surfactants, propylene glycol and ethanol were selected as co-solvent in aqueous phase. Experiments were performed according to a two-level fractional factorial design to evaluate the effects of independent variables: Tween 20 concentration in surfactant system (X1), surfactant concentration (X2), ethanol concentration in co-solvent system (X3), limonene concentration (X4) on MX solubility (Y1), permeation flux (Y2), lag time (Y3), deposition (Y4) of MX microemulsions. It was found that Y1 increased with increasing X3 and decreasing X2, X4; whereas Y2 increased with decreasing X1, X2 and increasing X3. While Y3 was not affected by these variables, Y4 increased with decreasing X1, X2. Three regression equations were obtained and calculated for predicted values of responses Y1, Y2 and Y4. The predicted values matched experimental values reasonably well with high determination coefficient. By using optimal desirability function, optimized microemulsion demonstrating the highest MX solubility, permeation flux and skin deposition was confirmed as low level of X1, X2 and X4 but high level of X3.

  16. Status of the Neutrino Factory accelerator design studies

    CERN Document Server

    Prior, Gersende

    2013-01-01

    This document is a review of the present status of the Neutrino Factory design study, after the publication of the Interim Design Report and before the publication of the Reference Design Report. The different components of the accelerator as well as their current design stage and future tasks are described here.

  17. Optimization of permeability for quality improvement by using factorial design

    Science.gov (United States)

    Said, Rahaini Mohd; Miswan, Nor Hamizah; Juan, Ng Shu; Hussin, Nor Hafizah; Ahmad, Aminah; Kamal, Mohamad Ridzuan Mohamad

    2017-05-01

    Sand castings are used worldwide by the manufacturing process in Metal Casting Industry, whereby the green sand are the commonly used sand mould type in the industry of sand casting. The defects on the surface of casting product is one of the problems in the industry of sand casting. The problems that relates to the defect composition of green sand are such as blowholes, pinholes shrinkage and porosity. Our objective is to optimize the best composition of green sand in order to minimize the occurrence of defects. Sand specimen of difference parameters (Bentonite, Green Sand, Cold dust and water) were design and prepared to undergo permeability test. The 24 factorial design experiment with four factors at difference composition were runs, and the total of 16 runs experiment were conducted. The developed models based on the experimental design necessary models were obtained. The model with a high coefficient of determination (R2=0.9841) and model for predicted and actual fitted well with the experimental data. Using the Analysis of Design Expert software, we identified that bentonite and water are the main interaction effect in the experiments. The optimal settings for green sand composition are 100g silica sand, 21g bentonite, 6.5 g water and 6g coal dust. This composition gives an effect of permeability number 598.3GP.

  18. Fractional Factorial Experiment Design Involving Non-normal Responses and Simulation Analysis%非正态响应的部分因子试验设计与仿真分析

    Institute of Scientific and Technical Information of China (English)

    汪建均; 马义中

    2011-01-01

    讨论了非正态响应试验设计中广泛应用的广义线性模型,针对小样本的部分因子试验设计,运用MCMC方法模拟出广义线性模型各参数后验分布的马尔科夫链,提出了根据各参数大于零或小于零的后验概率识别显著性因于的新方法.通过部分因子试验的仿真数据利用SAS软件对GLM进行贝叶斯分析,结果表明基于MCMC模拟的GLM贝叶斯分析方法能有效地识别出部分因子试验设计中的显著性因子.%Generalized linear models (GLM) were discussed, which are used widely in the field of experimental design involving non-normal response variables. As for small sample problem of Fractional Factorial Experiment Design, the MCMC method was putforward to simulate dynamically the Markov Chain of every parameter's posterior distribution in generalized linear models, and a new method was put forward to identify significant factors according to Bayesian posterior probability of all parameters which are more than or less than zero. Simulated fractional factorial experimental data was used to simulate and analyze the Bayesian GLM by the SAS sofiware. The results show that the Bayesian analysis method based on MCMC simulation can identify effectively significant factors in fractional factorial experiment design.

  19. A cost-Effective Design for a Neutrino Factory

    Energy Technology Data Exchange (ETDEWEB)

    Berg, J.S.; Bogacz, S.A.; Caspi, S.; Cobb, J.; Fernow, R.C.; Gallardo, J.C.; Kahn, S.; Kirk, H.; Neuffer, D.; Palmer, R.; Paul, K.; Witte, H.; Zisman, M.

    2006-06-01

    There have been active efforts in the U.S., Europe, and Japan on the design of a Neutrino Factory. This type of facility produces intense beams of neutrinos from the decay of muons in a high energy storage ring. In the U.S., a second detailed Feasibility Study (FS2) for a Neutrino Factory was completed in 2001. Since that report was published, new ideas in bunching, cooling and acceleration of muon beams have been developed. We have incorporated these ideas into a new facility design, which we designate as Study 2B (ST2B), that should lead to significant cost savings over the FS2 design.

  20. Cost-effective design for a neutrino factory

    Energy Technology Data Exchange (ETDEWEB)

    Alex Bogacz

    2006-01-01

    There have been active efforts in the U.S., Europe, and Japan on the design of a neutrino factory. This type of facility produces intense beams of neutrinos from the decay of muons in a high-energy storage ring. In the U.S., a second detailed feasibility study (FS2) for a neutrino factory was completed in 2001. Since that report was published, new ideas in bunching, cooling, and acceleration of muon beams have been developed. We have incorporated these ideas into a new facility design, which we designate as study 2B (ST2B), that should lead to significant cost savings over the FS2 design.

  1. Providing a Meaningful Social Studies Experience: Champions' Chocolate Factory.

    Science.gov (United States)

    Presnell, Laurie L.; Shaw, Donna Gail

    1988-01-01

    Describes a student teacher's experiences using a classroom simulation to teach fifth graders about the world of work. Summarizes the economic concepts and principles that were illustrated through the simulation of a candy factory. Discusses student activities and reporting in the five-six day lesson and includes a list of resources for teaching…

  2. A Sino-Finnish Initiative for Experimental Teaching Practices Using the Design Factory Pedagogical Platform

    Science.gov (United States)

    Björklund, Tua A.; Nordström, Katrina M.; Clavert, Maria

    2013-01-01

    The paper presents a Sino-Finnish teaching initiative, including the design and experiences of a series of pedagogical workshops implemented at the Aalto-Tongji Design Factory (DF), Shanghai, China, and the experimentation plans collected from the 54 attending professors and teachers. The workshops aimed to encourage trying out interdisciplinary…

  3. A Sino-Finnish Initiative for Experimental Teaching Practices Using the Design Factory Pedagogical Platform

    Science.gov (United States)

    Björklund, Tua A.; Nordström, Katrina M.; Clavert, Maria

    2013-01-01

    The paper presents a Sino-Finnish teaching initiative, including the design and experiences of a series of pedagogical workshops implemented at the Aalto-Tongji Design Factory (DF), Shanghai, China, and the experimentation plans collected from the 54 attending professors and teachers. The workshops aimed to encourage trying out interdisciplinary…

  4. Bioretention Systems: Partial Factorial Designs for Nitrate Removal

    Science.gov (United States)

    Changes in nutrient loadings are monitored by introducing captured stormwater runoff into eight outdoor rain gardens at EPA’s Urban Water Research Facility in Edison, New Jersey scaled for residential and urban landscapes. The partial factorial design includes non-vegetated meso...

  5. Factorial study of rain garden design for nitrogen removal

    Science.gov (United States)

    Abstract Nitrate (〖NO〗_3^--N ) removal studies in bioretention systems showed great variability in removal rates and in some cases 〖NO〗_3^--N was exported. A 3-way factorial design (2 x 2 x 4) was devised for eight outdoor un-vegetated rain gardens to evaluate the effects of ...

  6. Using Propensity Score Methods to Approximate Factorial Experimental Designs

    Science.gov (United States)

    Dong, Nianbo

    2011-01-01

    The purpose of this study is through Monte Carlo simulation to compare several propensity score methods in approximating factorial experimental design and identify best approaches in reducing bias and mean square error of parameter estimates of the main and interaction effects of two factors. Previous studies focused more on unbiased estimates of…

  7. Two Ways Factorial Design for round robin test of anemometers

    Energy Technology Data Exchange (ETDEWEB)

    Cuerva, A.

    1998-07-01

    This work presents a way to carry out an inter-comparison between different cup anemometers that are tested in different wind tunnels. The method applied is known as Factorial design and allows determining the influence in the test of different factors in this case the anemometer itself and the wind tunnel where it is tested. (Author) 4 refs.

  8. Theory of optimal blocking for fractional factorial split-plot designs

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    [1]Box, G.E.P., Jones, S., Split-plot designs for robust product experimentation, J. Appl. Statist., 1992, 19: 3-26.[2]Mukerjee, R., Fang, K.T., Fractional factorial split-plot designs with minimum aberration and maximum estimation capacity, Statist, Sinica, 2002, 12: 885-903.[3]Huang, P., Chen, D., Voelkel, J.O., Minimum aberration two-level split-plot designs, Technometrics, 1998, 40(4):314-326.[4]Fries, A., Hunter, W.G., Minimum aberration 2k-p designs, Technometrics, 1980, 22(4): 601-608.[5]Bingham, D., Sitter, R.R., Minimum aberration two-level fractional factorial split-plot designs, Technometrics,1999, 41(1): 62-70.[6]Bingham, D., Sitter, R.R., Some theoretical results for fractional factorial split-plot designs, Ann. Statist., 1999,27 (4): 1240-1255.[7]Bingham, D., Sitter, R.R., Design issues in fractional factorial split-plot experiments, J. Quality Technology,2001, 33(1): 2-15.[8]Cheng, C.S., Steinberg, D.M., Sun, D.X., Minimum aberration and model robustness for two-level factorial designs, J. Roy. Statist. Soc., Ser. B, 1999, 61: 85-93.[9]Cheng, C.S., Mukerjee, R., Regular fractional factorial designs with minimum aberration and maximum estimation capacity, Ann. Statist., 1998, 26: 2289-2300.[10]Zhang, R., Park, D.K., Optimal blocking of two-level fractional factorial designs, J. Statist. Plann. Infer., 2000,91 (1): 107-121.[11]Ai, M., Zhang, R., Theory of minimum aberration blocked regular mixed factorial designs, J. Statist. Plann.Infer., 2004, 126(1): 305-323.[12]Ai, M., Zhang, R., Theory of optimal blocking of nonregular factorial designs, Canad. J. Statist., 2004, 32(1):57-72.[13]Tang, B., Wu, C.F.J., Characterization of minimum aberration 2n-k designs in terms of their complementary designs, Ann. Statist., 1996, 24(6): 2549-2559.[14]Suen, C.Y., Chen, H., Wu, C.F.J., Some identities on qn-m designs with application to minimum aberrations,Ann. Statist., 1997, 25(3): 1176-1188.[15]Mukerjee, R., Wu, C.F.J., Minimum aberration designs for mixed

  9. KEKB B-factory design report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-08-01

    KEKB is an asymmetric electron-positron collider at 8 x 3.5 GeV which aims at providing electron-positron collision at the center of mass energy of 10.58 GeV. Its mission is to support high energy physics research programs on CP violation and other topics in B-meson decay. Its luminosity goal is 10{sup 34}/cm{sup 2}s. As the construction of the KEKB was approved as a five-year project by the Japanese government, it was begun formally in April, 1994. The low energy ring LER for positrons at 3.5 GeV and the high energy ring HER for electrons at 8 GeV will be built side by side in the existing TRISTAN tunnel with 3 km circumference, and the maximum use of the infrastructure of TRISTAN will be made. The KEKB has only one interaction point in the Tsukuba experimental hall, and the BELLE detector will be installed in this interaction region. The layout of the two rings is explained. In this report, the basic design, hardware systems, the construction schedule, physics requirement, machine parameters, beam-beam interaction, RF parameters, impedance and collective effects, lattice design, interaction region, RF system, magnet system, vacuum system, beam instrumentation, injection and accelerator control system are described. (K.I.).

  10. Cost-effective design for a neutrino factory

    Directory of Open Access Journals (Sweden)

    J. S. Berg

    2006-01-01

    Full Text Available There have been active efforts in the U.S., Europe, and Japan on the design of a neutrino factory. This type of facility produces intense beams of neutrinos from the decay of muons in a high-energy storage ring. In the U.S., a second detailed feasibility study (FS2 for a neutrino factory was completed in 2001. Since that report was published, new ideas in bunching, cooling, and acceleration of muon beams have been developed. We have incorporated these ideas into a new facility design, which we designate as study 2B (ST2B, that should lead to significant cost savings over the FS2 design.

  11. ULTRA HIGH SPEED FACTORIAL DESIGN IN SUB-NANOMETER TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    Arindam Banerjee

    2013-02-01

    Full Text Available This work proposes a high speed and low power factorial design in 22nm technology and also it counts the effect of sub nano-meter constraints on this circuit. A comparative study for this design has been done for 90nm, 45nm and 22nm technology. The rise in circuit complexity and speed is accompanied by the scaling of MOSFET’s. The transistor saturation current Idsat is an important parameter because the transistor current determines the time needed to charge and discharge the capacitive loads on chip, and thus impacts the product speed more than any other transistor parameter. The efficient implementation of a factorial number is carried out by using a decremented and multipliers which has been lucidly discussed in this paper. Normally in a factorial module a number is calculated as the iterative multiplication of the given number to the decremented value of the given number. A Parallel adder based decremented has been proposed for calculating the factorial of any number that also includes 0 and 1. The performances are calculated by using the existing 90-nm CMOS technology and scaling down the existing technology to 45-nm and 22-nm.

  12. Clustering Words to Match Conditions: An Algorithm for Stimuli Selection in Factorial Designs

    Science.gov (United States)

    Guasch, Marc; Haro, Juan; Boada, Roger

    2017-01-01

    With the increasing refinement of language processing models and the new discoveries about which variables can modulate these processes, stimuli selection for experiments with a factorial design is becoming a tough task. Selecting sets of words that differ in one variable, while matching these same words into dozens of other confounding variables…

  13. Minimum secondary aberration fractional factorial split-plot designs in terms of consulting designs

    Institute of Scientific and Technical Information of China (English)

    Al; Mingyao; ZHANG; Runchu

    2006-01-01

    It is very powerful for constructing nearly saturated factorial designs to characterize fractional factorial (FF) designs through their consulting designs when the consulting designs are small. Mukerjee and Fang employed the projective geometry theory to find the secondary wordlength pattern of a regular symmetrical fractional factorial split-plot (FFSP) design in terms of its complementary subset, but not in a unified form. In this paper, based on the connection between factorial design theory and coding theory, we obtain some general and unified combinatorial identities that relate the secondary wordlength pattern of a regular symmetrical or mixed-level FFSP design to that of its consulting design. According to these identities, we further establish some general and unified rules for identifying minimum secondary aberration, symmetrical or mixed-level, FFSP designs through their consulting designs.

  14. Systems analysis and futuristic designs of advanced biofuel factory concepts.

    Energy Technology Data Exchange (ETDEWEB)

    Chianelli, Russ; Leathers, James; Thoma, Steven George; Celina, Mathias C.; Gupta, Vipin P.

    2007-10-01

    The U.S. is addicted to petroleum--a dependency that periodically shocks the economy, compromises national security, and adversely affects the environment. If liquid fuels remain the main energy source for U.S. transportation for the foreseeable future, the system solution is the production of new liquid fuels that can directly displace diesel and gasoline. This study focuses on advanced concepts for biofuel factory production, describing three design concepts: biopetroleum, biodiesel, and higher alcohols. A general schematic is illustrated for each concept with technical description and analysis for each factory design. Looking beyond current biofuel pursuits by industry, this study explores unconventional feedstocks (e.g., extremophiles), out-of-favor reaction processes (e.g., radiation-induced catalytic cracking), and production of new fuel sources traditionally deemed undesirable (e.g., fusel oils). These concepts lay the foundation and path for future basic science and applied engineering to displace petroleum as a transportation energy source for good.

  15. Evolutionary algorithm for the neutrino factory front end design

    Energy Technology Data Exchange (ETDEWEB)

    Poklonskiy, Alexey A.; /Michigan State U.; Neuffer, David; /Fermilab

    2009-01-01

    The Neutrino Factory is an important tool in the long-term neutrino physics program. Substantial effort is put internationally into designing this facility in order to achieve desired performance within the allotted budget. This accelerator is a secondary beam machine: neutrinos are produced by means of the decay of muons. Muons, in turn, are produced by the decay of pions, produced by hitting the target by a beam of accelerated protons suitable for acceleration. Due to the physics of this process, extra conditioning of the pion beam coming from the target is needed in order to effectively perform subsequent acceleration. The subsystem of the Neutrino Factory that performs this conditioning is called Front End, its main performance characteristic is the number of the produced muons.

  16. Introduction to Statistically Designed Experiments

    Energy Technology Data Exchange (ETDEWEB)

    Heaney, Mike

    2016-09-13

    Statistically designed experiments can save researchers time and money by reducing the number of necessary experimental trials, while resulting in more conclusive experimental results. Surprisingly, many researchers are still not aware of this efficient and effective experimental methodology. As reported in a 2013 article from Chemical & Engineering News, there has been a resurgence of this methodology in recent years (http://cen.acs.org/articles/91/i13/Design-Experiments-Makes-Comeback.html?h=2027056365). This presentation will provide a brief introduction to statistically designed experiments. The main advantages will be reviewed along with the some basic concepts such as factorial and fractional factorial designs. The recommended sequential approach to experiments will be introduced and finally a case study will be presented to demonstrate this methodology.

  17. Batch phenol biodegradation study and application of factorial experimental design

    Directory of Open Access Journals (Sweden)

    A. Hellal

    2010-01-01

    Full Text Available A bacterium, Pseudomonas aeruginosa (ATTC27853, was investigated for its ability to grow and to degrade phenol as solecarbon source, in aerobic batch culture. The parameters which affect the substrate biodegradation such as the adaptation ofbacteria to phenol, the temperature, and the nature of the bacteria were investigated. The results show that for a range oftemperature of 30 to 40°C, the best degradation of phenol for a concentration of 100mg/l was observed at 30°C. The regenerationof the bacterium which allows the reactivation of its enzymatic activity, shows that the degradation of 100 mg/ l ofsubstrate at 30° C required approximately 50 hours with revivified bacteria, while it only starts after 72 hours for those norevivified. Adapted to increasing concentrations, allows the bacteria to degrade a substrate concentration of about 400mg/l in less than 350 hours.A second part was consisted in the determination of a substrate degradation model using the factorial experiment design,as a function of temperature (30-40°C and of the size of the inoculums (260.88 - 521.76mg/ l. The results were analyzedstatistically using the Student’s t-test, analysis of variance, and F-test. The value of R2 (0.99872 and adjusted R2 (0.9962close to 1.0, verifies the good correlation between the observed and the predicted values, and provides the excellent relationshipbetween the independent variables (factors and the response (the time of the phenol degradation. F-value found above200, indicates that the considered model is statistically significant.

  18. New and Efficient Neutrino Factory Front-End Design

    CERN Document Server

    Gallardo, Juan C; Kirk, Harold G; Neuffer, David V; Palmer, Robert; Paul, Kevin; Scott Berg, J

    2005-01-01

    As part of the APS Joint Study on the Future of Neutrino Physics* we have carried out detailed studies of the Neutrino Factory front-end. A major goal of the new study was to achieve equal performance to our earlier feasibility studies** at reduced cost. The optimal channel design is described in this paper. New innovations included an adiabatic buncher for phase rotation and a simplified cooling channel with LiH absorbers. The linear channel is 295 m long and produces 0.17 muons per proton on target into the assumed accelerator transverse acceptance of 30 mm and longitudinal acceptance of 150 mm.

  19. Factorial Design to Optimize Biosurfactant Production by Yarrowia lipolytica

    Directory of Open Access Journals (Sweden)

    Gizele Cardoso Fontes

    2010-01-01

    Full Text Available In order to improve biosurfactant production by Yarrowia lipolytica IMUFRJ 50682, a factorial design was carried out. A 24 full factorial design was used to investigate the effects of nitrogen sources (urea, ammonium sulfate, yeast extract, and peptone on maximum variation of surface tension (ΔST and emulsification index (EI. The best results (67.7% of EI and 20.9 mN m−1 of ΔST were obtained in a medium composed of 10 g 1−1 of ammonium sulfate and 0.5 g 1−1 of yeast extract. Then, the effects of carbon sources (glycerol, hexadecane, olive oil, and glucose were evaluated. The most favorable medium for biosurfactant production was composed of both glucose (4% w/v and glycerol (2% w/v, which provided an EI of 81.3% and a ΔST of 19.5 mN m−1. The experimental design optimization enhanced ΔEI by 110.7% and ΔST by 108.1% in relation to the standard process.

  20. Experimentation and Optimization of Surface Roughness in WEDM Process using Full Factorial Design integrated PCA Approach

    Directory of Open Access Journals (Sweden)

    Rismaya Kumar Mishra

    2016-04-01

    Full Text Available Application of WEDM is growing rapidly since the last three decades due its several advantages and applicability of the process to produce complicated intrinsic, extrinsic shapes of miniaturized size, so there is a need to analyze and optimize the process. In this research work the experiments were conducted using the general full factorial design methodology with 48 experimental runs. The values response parameters Ra, Rq and Rz were measured and the effect of process parameters wire type, wire tension, power, pulse on time and discharge current on these responses were studied qualitatively and quantitatively using main effect plots, interaction plots and ANOVA. Finally the optimal process parameter setting for responses were found by using full factorial design integrated PCA Approach.

  1. Optimization of MCM-48 synthesis using factorial design

    Energy Technology Data Exchange (ETDEWEB)

    Nascimento, A.R. do; Medeiros, R.L.B. de A.; Melo, M. A. de F.; Melo, D.M. de A. [Universitdade Federal do Rio Grande do Norte (UFRN), Natal (Brazil); Souza, M.J.B. de, E-mail: ale3ufs@yahoo.com.br [Universidade Federal de Sergipe (UFS), Sao Cristovao (Brazil)

    2016-10-15

    MCM-48 mesoporous materials were hydrothermally synthesized according to the 2{sup 2} factorial design by varying the crystallization time and temperature of the synthesis gel, and characterized by means of X-ray diffraction analysis and adsorption of N{sub 2} . In the crystallization temperature and time conditions used, specific areas between 924 to 1102 m{sup 2}.g{sup -1}, pore volumes between 0.015 to 0.087 cm{sup 3}.g{sup -1} and pore diameters between 3.2 to 4.0 nm were obtained. It was observed that for the syntheses performed at high temperature, the crystallization time should be reduced so that the material structure is formed. (author)

  2. Designing High Performance Factory Automation Applications on Top of DDS

    Directory of Open Access Journals (Sweden)

    Isidro Calvo

    2013-04-01

    Full Text Available DDS is a recent specification aimed at providing high‐performance publisher/subscriber middleware solutions. Despite being a very powerful flexible technology, it may prove complex to use, especially for the inexperienced. This work provides some guidelines for connecting software components that represent a new generation of automation devices (such as PLCs, IPCs and robots using Data Distribution Service (DDS as a virtual software bus. More specifically, it presents the design of a DDS‐based component, the so‐called Automation Component, and discusses how to map different traffic patterns using DDS entities exploiting the wealth of QoS management mechanisms provided by the DDS specification. A case study demonstrates the creation of factory automation applications out of software components that encapsulate independent stations.

  3. Designing High Performance Factory Automation Applications on Top of DDS

    Directory of Open Access Journals (Sweden)

    Isidro Calvo

    2013-04-01

    Full Text Available DDS is a recent specification aimed at providing high-performance publisher/subscriber middleware solutions. Despite being a very powerful flexible technology, it may prove complex to use, especially for the inexperienced. This work provides some guidelines for connecting software components that represent a new generation of automation devices (such as PLCs, IPCs and robots using Data Distribution Service (DDS as a virtual software bus. More specifically, it presents the design of a DDS-based component, the so-called Automation Component, and discusses how to map different traffic patterns using DDS entities exploiting the wealth of QoS management mechanisms provided by the DDS specification. A case study demonstrates the creation of factory automation applications out of software components that encapsulate independent stations.

  4. PEP-II: An asymmetric B factory. Conceptual design report

    Energy Technology Data Exchange (ETDEWEB)

    1993-06-01

    In this report, the authors have described an updated conceptual design for the high-luminosity Asymmetric B Factory (PEP-II) to be built in the PEP tunnel culmination of more than four years of effort aimed at the design and construction of an asymmetric e{sub +}e{sub {minus}} collider capable of achieving a luminosity of L = 3 {times} 10{sup 33} cm{sup {minus}2} s{sup {minus}1}. All aspects of the conceptual design were scrutinized in March 1991 by a DOE technical review committee chaired by Dr. L. Edward Temple. The design was deemed feasible and capable of achieving its physics goals. Furthermore, the cost estimate, schedule, and management plan for the project were fully endorsed by the committee. This updated conceptual design report captures the technical progress since the March 1991 review and reflects the lower cost estimate corresponding to the improved design. Although the PEP-II design has continued to evolve, no technical scope changes have been made that invalidate the conclusion of the DOE review. The configuration adopted utilizes two storage rings, an electron ring operating at 9 GeV and a positron ring at 3.1 GeV, each with a circumference of 2200 m. The high-energy ring is an upgrade of the PEP storage ring at SLAC; all PEP magnets and most power supplies will be reused. The upgrade consists primarily of replacing the PEP vacuum chamber and RF system with newly designed versions optimized for the high-current environment of PEP-II. The low-energy ring will be newly constructed and will be situated atop the high-energy ring in the PEP tunnel. Utilities already installed in the PEP tunnel are largely sufficient to operate the two PEP-II storage rings.

  5. The Skateboard Factory: Curriculum by Design--Oasis Skateboard Factory Q&A with Craig Morrison

    Science.gov (United States)

    Pearson, George

    2012-01-01

    Since its opening three years ago, Oasis Skateboard Factory (OSF), founded by teacher Craig Morrison, has attracted considerable media exposure and received a Ken Spencer Award from the CEA for its innovative program. OSF is one of three programs offered by Oasis Alternative Secondary School, one of 22 alternative secondary schools of the Toronto…

  6. The Skateboard Factory: Curriculum by Design--Oasis Skateboard Factory Q&A with Craig Morrison

    Science.gov (United States)

    Pearson, George

    2012-01-01

    Since its opening three years ago, Oasis Skateboard Factory (OSF), founded by teacher Craig Morrison, has attracted considerable media exposure and received a Ken Spencer Award from the CEA for its innovative program. OSF is one of three programs offered by Oasis Alternative Secondary School, one of 22 alternative secondary schools of the Toronto…

  7. Design and analysis of experiments with SAS

    CERN Document Server

    Lawson, John

    2010-01-01

    IntroductionStatistics and Data Collection Beginnings of Statistically Planned Experiments Definitions and Preliminaries Purposes of Experimental Design Types of Experimental Designs Planning Experiments Performing the Experiments Use of SAS SoftwareCompletely Randomized Designs with One Factor Introduction Replication and Randomization A Historical Example Linear Model for Completely Randomized Design (CRD) Verifying Assumptions of the Linear Model Analysis Strategies When Assumptions Are Violated Determining the Number of Replicates Comparison of Treatments after the F-TestFactorial Designs

  8. A COMPARISON BETWEEN CLASSICAL AND ROBUST METHOD IN A FACTORIAL DESIGN IN THE PRESENCE OF OUTLIER

    Directory of Open Access Journals (Sweden)

    Anwar Fitrianto

    2013-01-01

    Full Text Available Analysis of Variance (ANOVA techniques which is based on classical Least Squares (LS method requires several assumptions, such as normality, constant variances and independency. Those assumptions can be violated due to several causes, such as the presence of an outlying observation. There are many evident in literatures that the LS estimate is easily affected by outliers. To remedy this problem, a robust procedure that provides estimation, inference and testing that are not influenced by outlying observations is put forward. A well-known approach to handle dataset with outliers is the M-estimation. In this study, both classical and robust procedures are employed to data of a factorial experiment. The results signify that the classical method of least squares estimates instead of robust methods lead to misleading conclusion of the analysis in factorial designs.

  9. MOBILITY OF MERCURY OF THE DENTAL AMALGAM IN REDUCTION PROCESS IN THE SEDIMENTS: FACTORIAL DESIGN ANALISYS

    Directory of Open Access Journals (Sweden)

    Raquel Dalla Costa

    2008-12-01

    Full Text Available The dental wastewater can contribute to the total daily mercury load on environment. Factorial design of experiments is useful toanalysis of factors that influence in this mobility. The aim of the present study was to design experiments to examine the effects ofoperational variables – temperature, pH and contact time - which may affect the mobility of mercury in form of dental amalgamresidue in reduction process in the sediments of the Pirapó River. Based on the factorial design of experiments and the analysis ofvariance, the temperature was the most significant factor in this process, followed by the pH and contact time. The parametersaffecting the mobility of total mercury showed that when the temperature and contact time increases and pH decreases there is animportant increase of mercury concentration in process. For the tested conditions, the high total mercury concentration was obtainedusing the temperature = 35oC, pH = 4.0 and contact time = 10 days.

  10. Industry 4.0 learning factory didactic design parameters for industrial engineering education in South Africa

    Directory of Open Access Journals (Sweden)

    Sackey, S. M.

    2017-05-01

    Full Text Available To manage the impact of Industry 4.0 on industrial engineering (IE education curriculum requirements, realistic teaching and learning infrastructure such as a learning factory are required. This paper scans the literature to determine Industry 4.0’s principles and interactions with IE and a learning factory, surveys relevant universities by questionnaire to determine its current status and practices, and formulates didactic design parameters for an Industry 4.0 learning factory to support IE education in South Africa, making use of existing models of cyber-physical systems and learning factory morphology. In other results, the technical universities are discovered to be more positively disposed, in general terms, to developing an Industry 4.0 learning factory than are the traditional programmes which, with one exception, prefer computational facilities. Of ten universities that offer IE, only one — a traditional programme — has made significant progress towards creating an Industry 4.0 learning factory.

  11. Neutrino factory

    Directory of Open Access Journals (Sweden)

    M. Bogomilov

    2014-12-01

    Full Text Available The properties of the neutrino provide a unique window on physics beyond that described by the standard model. The study of subleading effects in neutrino oscillations, and the race to discover CP-invariance violation in the lepton sector, has begun with the recent discovery that θ_{13}>0. The measured value of θ_{13} is large, emphasizing the need for a facility at which the systematic uncertainties can be reduced to the percent level. The neutrino factory, in which intense neutrino beams are produced from the decay of muons, has been shown to outperform all realistic alternatives and to be capable of making measurements of the requisite precision. Its unique discovery potential arises from the fact that only at the neutrino factory is it practical to produce high-energy electron (antineutrino beams of the required intensity. This paper presents the conceptual design of the neutrino factory accelerator facility developed by the European Commission Framework Programme 7 EUROν Design Study consortium. EUROν coordinated the European contributions to the International Design Study for the Neutrino Factory (the IDS-NF collaboration. The EUROν baseline accelerator facility will provide 10^{21} muon decays per year from 12.6 GeV stored muon beams serving a single neutrino detector situated at a source-detector distance of between 1 500 km and 2 500 km. A suite of near detectors will allow definitive neutrino-scattering experiments to be performed.

  12. SCREENING OF MEDIUM COMPOUNDS USING A TWO-LEVEL FACTORIAL DESIGN FOR SACCHAROMYCES BOULARDII

    Directory of Open Access Journals (Sweden)

    GUOWEI SHU

    2016-04-01

    Full Text Available Even if the probiotic effect of Saccharomyces boulardii is has been reported, this yeast is rarely used in medium composition. Based on single factor experiment, two-level factorial design was employed to evaluate the effect of carbon sources (sucrose, glucose, nitrogen sources (soy peptone, beef extract, yeast extract, calf serum, malt extract and salts (K2HPO4, KH2PO4, MgSO4, Na2HPO4, NaH2PO4, CaCl2, sodium citrate, sodium glutamate on the growth of S. boulardii. At the same time, the optical density (OD in the medium was measured at 560 nm after 36 h of incubation. The result of two-level factorial design experiment showed that calf serum (p = 0.0214 and sodium citrate (p = 0.0045 are the significant growth factors of S. boulardii, sucrose (p = 0.0861 and malt extract (p = 0.0763 are important factors. In addition, sucrose and sodium citrate showed positive effect on the growth of S. boulardii. However, calf serum and malt extract showed negative effect on the growth. And we determined that the optimum medium composition for S. boulardii was as follow: 37.5 g·L-1 sucrose, 6 g·L-1 calf serum, 6 g·L-1 malt extract, 5 g·L-1 sodium citrate.

  13. Structural analysis of polymer thin films using GISAXS in the tender X-ray region: Concept and design of GISAXS experiments using the tender X-ray energy at BL-15A2 at the Photon Factory

    Energy Technology Data Exchange (ETDEWEB)

    Takagi, H., E-mail: takagih@post.kek.jp; Igarashi, N.; Mori, T.; Saijo, S.; Nagatani, Y.; Shimizu, N. [Photon Factory, Institute of Materials Structure Science, High Energy Accelerator Research Organization, 1-1 Oho, Tsukuba, Ibaraki 305-0801 (Japan); Ohta, H. [Mitsubishi Electric System & Service Co., Ltd, Accelerator Engineering Center, 2-8- 8 Umezono, Tsukuba, Ibaraki 305-0045 (Japan); Yamamoto, K. [Graduate School of Engineering, Department of Materials Science & Technology, Nagoya Institute of Technology, Gokiso-cho, Showa-ku, Nagoya 466-8555 (Japan)

    2016-10-14

    If small angle X-ray scattering (SAXS) utilizing the soft X-ray region is available, advanced and unique experiments, which differ from traditional SAXS methods, can be realized. For example, grazing-incidence small angle X-ray scattering (GISAXS) using hard X-ray is a powerful tool for understanding the nanostructure in both vertical and lateral directions of thin films, while GISAXS utilizing the tender X-ray region (SX-GISAXS) enables depth-resolved analysis as well as a standard GISAXS analysis in thin films. Thus, at BL-15A2 at the Photon Factory, a dedicated diffractometer for SX-GISAXS (above 2.1 keV) was constructed. This diffractometer is composed of four vacuum chambers and can be converted into the vacuum state from the sample chamber in front of the detector surface. Diffractions are clearly observed until 12th peak when measuring collagen by SAXS with an X-ray energy of 2.40 keV and a camera length of 825 mm. Additionally, we conducted the model experiment using SX-GISAXS with an X-ray energy of 2.40 keV to confirm that a poly(methyl methacrylate)-poly(n-butyl acrylate) block copolymer thin film has a microphase-separated structure in the thin film, which is composed of lamellae aligned both parallel and perpendicular to the substrate surface. Similarly, in a polystyrene-poly(methyl methacrylate) block copolymer thin film, SX-GISAXS with 3.60 keV and 5.73 keV revealed that hexagonally packed cylinders are aligned parallel to the substrate surface. The incident angle dependence of the first order peak position of the q{sub z} direction obtained from experiments at various incident X-ray energies agrees very well with the theoretical one calculated from the distorted wave Born approximation.

  14. Structural analysis of polymer thin films using GISAXS in the tender X-ray region: Concept and design of GISAXS experiments using the tender X-ray energy at BL-15A2 at the Photon Factory

    Science.gov (United States)

    Takagi, H.; Igarashi, N.; Mori, T.; Saijo, S.; Nagatani, Y.; Ohta, H.; Yamamoto, K.; Shimizu, N.

    2016-10-01

    If small angle X-ray scattering (SAXS) utilizing the soft X-ray region is available, advanced and unique experiments, which differ from traditional SAXS methods, can be realized. For example, grazing-incidence small angle X-ray scattering (GISAXS) using hard X-ray is a powerful tool for understanding the nanostructure in both vertical and lateral directions of thin films, while GISAXS utilizing the tender X-ray region (SX-GISAXS) enables depth-resolved analysis as well as a standard GISAXS analysis in thin films. Thus, at BL-15A2 at the Photon Factory, a dedicated diffractometer for SX-GISAXS (above 2.1 keV) was constructed. This diffractometer is composed of four vacuum chambers and can be converted into the vacuum state from the sample chamber in front of the detector surface. Diffractions are clearly observed until 12th peak when measuring collagen by SAXS with an X-ray energy of 2.40 keV and a camera length of 825 mm. Additionally, we conducted the model experiment using SX-GISAXS with an X-ray energy of 2.40 keV to confirm that a poly(methyl methacrylate)-poly(n-butyl acrylate) block copolymer thin film has a microphase-separated structure in the thin film, which is composed of lamellae aligned both parallel and perpendicular to the substrate surface. Similarly, in a polystyrene-poly(methyl methacrylate) block copolymer thin film, SX-GISAXS with 3.60 keV and 5.73 keV revealed that hexagonally packed cylinders are aligned parallel to the substrate surface. The incident angle dependence of the first order peak position of the qz direction obtained from experiments at various incident X-ray energies agrees very well with the theoretical one calculated from the distorted wave Born approximation.

  15. Dental caries experience in high risk soft drinks factory workers of South India: a comparative study.

    Science.gov (United States)

    Kumar, Sandeep; Acharya, Shashidhar; Vasthare, Ramprasad; Singh, Siddharth Kumar; Gupta, Anjali; Debnath, Nitai

    2014-01-01

    The consumption of soft-drinks has been associated with dental caries development. The aim was to evaluate dental caries experience amongst the workers working in soft-drink industries located in South India and compare it with other factory workers. To evaluate the validity of specific caries index (SCI), which is newer index for caries diagnosis. This was a cross-sectional study carried out among 420 workers (210 in soft-drinks factory and 210 in other factories), in the age group of 20-45 years of Udupi district, Karnataka, India. Index used for clinical examination was decayed, missing, filled surfaces (DMFS) index and SCI. The mean and standard deviation (SD) of decayed surface (5.8 ± 1.8), missing surface (4.3 ± 2) and filled surface (1.94 ± 1.95) and total DMFS score (12.11 ± 3.8) in soft-drinks factory workers were found to be significantly higher than the other factory workers. The total SCI score (mean and SD) was found to be significantly higher in soft-drinks factory workers (5.83 ± 1.80) compared with other factory workers (4.56 ± 1.45). There was a high correlation obtained between SCI score and DMFS score. The regression equation given by DMFS = 1.178 + 1.866 (SCI scores). The caries experience was higher in workers working in soft-drinks factory and this study also showed that specific caries index can be used as a valid index for assessing dental caries experience.

  16. Factorial design of a solar photocatalytic process to treatment of wastewater effluent

    Energy Technology Data Exchange (ETDEWEB)

    Francisco, Adriana Ribeiro; Paterniani, Jose Euclides Stipp [Universidade Estadual de Campinas (FEAGRI/UNICAMP), SP (Brazil). Fac. de Engenharia Agricola], E-mail: adriana.francisco@agr.unicamp.br; Kuwakino, Adriana Yuri [Universidade Estadual de Campinas (CESET/UNICAMP), Limeira, SP (Brazil). Centro Superior de Educacao Tecnologica

    2008-07-01

    Advanced treatments are attributed to improving the quality of various types of waste such as the sanitary wastewater. The heterogeneous photocatalysis is an alternative that allows to improve the effluents conditions. This is possible because many chemical compounds of environmental concern can be degraded using UV radiation on a semiconductor. However, to enable the efficiency of the process photocatalytic is necessary to conduct a study of optimization to establish favorable conditions between selected variables. The aim of this work was a reactor solar photocatalytic optimization using factorial design 2{sup k}, depending on variables: mass (TiO{sub 2}), time (min) and flow of air (L min{sup -1}), using as analytical response the removal of color. The experiment was conducted at the Faculty of Agricultural Engineering (FEAGRI) and it was used the sanitary wastewater of there. The results indicated that there were significant efficiency using combinations mass = 1000 mg L{sup -1}, time = 360 min and flow of air = 5 L min{sup -1}. In the calculations of factorial design, the time showed a marked positive effect of 7.76, while the flow of air, when in excess, had an inhibitor behavior, even getting positive effect. (author)

  17. Green Project System Design of Machine Process Factory

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    As the specialty of the product and the dim conscio us ness of environmental protection, the status of dirty, chaos and difference is l ong-term existed in the machine process factory. It seriously affects workers' work and living environment, and restricts the total level of the environment p rotection in our country. The project is the fatal scientific research task of H enan province in 2001. As the members' endeavor of task group, we have finished the total plan of green project system and some other ...

  18. CrossRef Neutrino factory proton driver and target design

    CERN Document Server

    Garoby, Roland; Thomason, John; Davenne, Tristan; Caretta, Ottone; Back, John J

    2016-01-01

    Neutrinos are very elusive particles belonging to the lepton family. They exist in different types corresponding to the different charged leptons, namely electrons, muons and taus. Contrary to electrons, neutrinos hardly interact with matter which makes them very difficult to detect and study. To the best of today’s knowledge, neutrinos have hardly any mass and they can change from one type to another (so-called “neutrino oscillation”). Most physicists think that this oscillation occurs because neutrinos have mass. A Neutrino Factory [1] is a special facility producing a large amount of neutrinos every year (typically 10$^{21}$ neutrinos/year). Its main purpose is to study the change of type of neutrinos between the place where they are generated and a remote location. In a Neutrino Factory, neutrinos result from the decay of muons, unstable particles with a mean lifetime of 2.2 $\\mu$s in their rest frame. Sharp beams of high energy neutrinos are obtained at the end of the long straight sections of a mu...

  19. A Methodology for the Assessment of Experiential Learning Lean: The Lean Experience Factory Study

    Science.gov (United States)

    De Zan, Giovanni; De Toni, Alberto Felice; Fornasier, Andrea; Battistella, Cinzia

    2015-01-01

    Purpose: The purpose of this paper is to present a methodology to assess the experiential learning processes of learning lean in an innovative learning environment: the lean model factories. Design/methodology/approach: A literature review on learning and lean management literatures was carried out to design the methodology. Then, a case study…

  20. A Methodology for the Assessment of Experiential Learning Lean: The Lean Experience Factory Study

    Science.gov (United States)

    De Zan, Giovanni; De Toni, Alberto Felice; Fornasier, Andrea; Battistella, Cinzia

    2015-01-01

    Purpose: The purpose of this paper is to present a methodology to assess the experiential learning processes of learning lean in an innovative learning environment: the lean model factories. Design/methodology/approach: A literature review on learning and lean management literatures was carried out to design the methodology. Then, a case study…

  1. Multilevel Factorial Experiments for Developing Behavioral Interventions: Power, Sample Size, and Resource Considerations

    Science.gov (United States)

    Dziak, John J.; Nahum-Shani, Inbal; Collins, Linda M.

    2012-01-01

    Factorial experimental designs have many potential advantages for behavioral scientists. For example, such designs may be useful in building more potent interventions by helping investigators to screen several candidate intervention components simultaneously and to decide which are likely to offer greater benefit before evaluating the intervention…

  2. Application of 2k Full Factorial Design in Optimization of Solvent-Free Microwave Extraction of Ginger Essential Oil

    OpenAIRE

    Mumtaj Shah; S K Garg

    2014-01-01

    The solvent-free microwave extraction of essential oil from ginger was optimized using a 23 full factorial design in terms of oil yield to determine the optimum extraction conditions. Sixteen experiments were carried out with three varying parameters, extraction time, microwave power, and type of sample for two levels of each. A first order regression equation best fits the experimental data. The predicted values calculated by the regression model were in good agreement with the experimental ...

  3. Optimization parameter design of a circular e+e-Higgs factory

    Institute of Scientific and Technical Information of China (English)

    WANG Dou; GAO Jie; XIAO Ming; GENG Hui-Ping; GUO Yuan-Yuan; XU Shou-Yan; WANG Na

    2013-01-01

    In this paper we will show a general method of how to make an optimized parameter design of a circular e+e-Higgs factory by using analytical expression of maximum beam-beam parameter and beamstrahlung beam lifetime starting from a given design goal and technical limitations.A parameter space has been explored.Based on beam parameters scan and RF parameters scan,a set of optimized parameter designs for 50 km Circular Higgs Factory (CHF) with different RF frequency was proposed.

  4. Enhancing biodegradation of wastewater by microbial consortia with fractional factorial design

    Energy Technology Data Exchange (ETDEWEB)

    Chen Yuancai [State Key Laboratory of Pulp and Paper Engineering, South China University of Technology, Guangzhou, 510640, Guangdong (China); Lin Chejen, E-mail: Jerry.Lin@lamar.edu [Department of Civil Engineering, Lamar University, Beaumont, TX 77710-0024 (United States); School of Environmental Science and Engineering, South China University of Technology, Guangzhou, 510006, Guangdong (China); Jones, Gavin [Texas Research Institute for Environmental Studies, Sam Houston State University, Huntsville, TX 77341-2506 (United States); Fu Shiyu; Zhan Huaiyu [State Key Laboratory of Pulp and Paper Engineering, South China University of Technology, Guangzhou, 510640, Guangdong (China)

    2009-11-15

    Batch experiments were conducted on the degradation of synthetic and municipal wastewater by six different strains, i.e., Agrobacterium sp., Bacillus sp., Enterobacter cloacae, Gordonia, Pseudomonas stutzeri, Pseudomonas putida. By applying a fractional factorial design (FFD) of experiments, the influence of each strain and their interactions were quantified. An empirical model predicting the treatment efficiency was built based on the results of the FFD experiments with an R{sup 2} value of 99.39%. For single strain, Enterobacter cloacae, Gordonia and P. putida (p = 0.008, 0.009 and 0.023, respectively) showed significant enhancement on organic removal in the synthetic wastewater. Positive interaction from Enterobacter cloacae, Gordonia (p = 0.046) was found, indicating that syntrophic interaction existed, and their coexistence can improve total organic carbon (TOC) degradation. Verification experiments were performed to evaluate the effect of bioaugmentation by introducing three selected strains into an activated sludge reactor for treating municipal wastewater. The removal efficiency of TOC with the bioaugmentation was increased from 67-72% to 80-84% at an influent TOC concentration of 200 mg/L. The results derived from this study indicate that the FFD is a useful screening tool for optimizing the microbial community to enhance treatment efficiency.

  5. Factorial design in the spheronization of ibuprofen microparticulates using the rotor disk fluid-bed technology.

    Science.gov (United States)

    Chukwumezie, Beatrice Nkem; Wojcik, Mark; Malak, Paul; Damico, Frank; Adeyeye, Moji Christianah

    2004-01-01

    The aim of this study was to statistically evaluate the effects of some formulation and process variables in the spheronization of microparticulates of ibuprofen using the rotor disk fluid-bed technology and water as binder. Preliminary studies revealed that presence of surfactant, plate material type, and nature and content of binder influenced the process and quality of the spheronized material. A 2 x 2 x 3 full factorial randomized experiment was designed, demonstrating the influence of these factors on properties such as percent yield, particle size distribution, densities, ibuprofen release, moisture content, etc., as well as their interactions in the experimental response. A response known as the usable fraction was created representing microparticulates of 250 to 850 microm sizes (mesh size 20-60). The reproducibility of the spheronization process was assessed by blocking the experiments with the experiments within the blocks randomly replicated. The main effects included two binder levels (X1), two surfactant levels (X2), and a three-level plate type (X3) in which 2 two-level factors were collapsed into a single three-level factor. The results from the statistical analysis (general linear model, JMP 4) showed that the variables studied had a significant influence on most of the response variables evaluated (p experiments had no significant effect on the process and product characteristics analyzed, indicating the reproducibility of the process.

  6. Feasibility analysis of replacing full factorial design with Taguchi method in mini-plot soil erosion experiments%微小区土壤侵蚀试验中田口方法代替全因子设计的可行性分析

    Institute of Scientific and Technical Information of China (English)

    张风宝; 杨明义; 李占斌

    2015-01-01

    During plot experiments with full factorial designs in order to understand the effects of factors such as soil type, slope gradient, slope length, rainfall characteristics, hydraulic factors, vegetation cover and human activities on soil erosion processes, the number of tests increases with the increasing number of factors and their levels, often leading to time, cost and labor consuming. Taguchi method has been evidenced as a simple, economical and efficient experiment design method in fields of engineering, environment and others, but not in soil erosion studies. This study investigated the feasibility of using Taguchi design method in studies on soil erosion under different conditions. To achieve this objective, a published dataset of mini-plot soil erosion by Meyer and Harmon in 1989 was used. This dataset included four factors and four levels of soil type (Brooksville, Dubbs, Atwood and Loring), slope gradient (5%, 10%, 20 and 30%), slope length (0.15, 0.3, 0.45 and 0.6 m) and rainfall intensity (13.6-14、26.4-27、74.3-76.3 and 112-115 mm/h). Results from Taguchi method, orthogonal design and full factorial design were compared. For comparison, the results from full factorial design were considered as measured values. Results showed that the test numbers used for Taguchi method/orthogonal design were only 6.3% of that for full factorial design, but there was no significant difference in mean of runoff and erosion rate between Taguchi method and the other methods. The maximum, minimum and variation coefficient and standard deviation for the erosion and runoff rates between the methods were slightly different. The main effect of each factor on the erosion and runoff rates obtained from Taguchi method followed the same trends with those obtained from full factorial design, but different from the orthogonal design sometimes. The three methods all could identify that rain intensity was the main contributor to slope erosion. However, the contribution rates from

  7. Theory of optimal blocking for fractional factorial split-plot designs

    Institute of Scientific and Technical Information of China (English)

    Al Mingyao; HE Shuyuan

    2005-01-01

    The issue of optimal blocking for fractional factorial split-plot (FFSP) designs is considered under the two criteria of minimum aberration and maximum estimation capacity. The criteria of minimum secondary aberration (MSA) and maximum secondary estimation capacity (MSEC) are developed for discriminating among rival nonisomorphic blcoked FFSP designs. A general rule for identifying MSA or MSEC blocked FFSP designs through their blocked consulting designs is established.

  8. Interim Design Report for the International Design Study for a Neutrino Factory

    Energy Technology Data Exchange (ETDEWEB)

    Choubey, S.; Gandhi, R.; Goswami, S.; /Harish-Chandra Res. Inst.; Berg, J.S.; Fernow, R.; Gallardo, J.C.; Gupta, R.; Kirk, H.; Simos, N.; Souchlas, N.; /Brookhaven; Ellis, M.; /Brunel U. /CERN /Durham U., IPPP /Fermilab /Geneva U. /Glasgow U. /Heidelberg, Max Planck Inst. /Imperial Coll., London /Jefferson Lab /Saha Inst.

    2011-10-01

    The starting point for the International Design Study for the Neutrino Factory (the IDS-NF) was the output of the earlier International Scoping Study for a future Neutrino Factory and super-beam facility (the ISS). The accelerator facility described in section 2 incorporates the improvements that have been derived from the substantial amount of work carried out within the Accelerator Working Group. Highlights of these improvements include: (1) Initial concepts for the implementation of the proton driver at each of the three example sites, CERN, FNAL, and RAL; (2) Detailed studies of the energy deposition in the target area; (3) A reduction in the length of the muon beam phase-rotation and bunching systems; (4) Detailed analyses of the impact of the risk that stray magnetic field in the accelerating cavities in the ionization cooling channel will reduce the maximum operating gradient. Several alternative ionization-cooling lattices have been developed as fallback options to mitigate this technical risk; (5) Studies of particle loss in the muon front-end and the development of strategies to mitigate the deleterious effects of such losses; (6) The development of more complete designs for the muon linac and re-circulating linacs; (7) The development of a design for the muon FFAG that incorporates insertions for injection and extraction; and (8) Detailed studies of diagnostics in the decay ring. Other sub-systems have undergone a more 'incremental' evolution; an indication that the design of the Neutrino Factory has achieved a degree of maturity. The design of the neutrino detectors described in section 3 has been optimized and the Detector Working Group has made substantial improvements to the simulation and analysis of the Magnetized Iron Neutrino Detector (MIND) resulting in an improvement in the overall neutrino-detection efficiency and a reduction in the neutrino-energy threshold. In addition, initial consideration of the engineering of the MIND has

  9. Factorial Design: Binocular and Monocular Depth Perception in Vertical and Horizontal Stimuli.

    Science.gov (United States)

    Zerbolio, Dominic J., Jr.; Walker, James T.

    1989-01-01

    Describes a factorial experiment that is used as a laboratory exercise in a research methods course. Uses a Howard-Dolman depth perception apparatus, combining the factors of viewing condition and rod orientation to illustrate the nature of an interaction and the necessity of an additional analysis of simple main effects. (Author/LS)

  10. The future of tau physics and tau-charm detector and factory design

    Energy Technology Data Exchange (ETDEWEB)

    Perl, M.L.

    1991-02-01

    Future research on the tau lepton requires large statistics, thorough investigation of systematic errors, and direct experimental knowledge of backgrounds. Only a tau-charm factory with a specially designed detector can provide all the experimental conditions to meet these requirements. This paper is a summary of three lectures delivered at the 1991 Lake Louise Winter Institute.

  11. More Powerful Tests of Simple Interaction Contrasts in the Two-Way Factorial Design

    Science.gov (United States)

    Hancock, Gregory R.; McNeish, Daniel M.

    2017-01-01

    For the two-way factorial design in analysis of variance, the current article explicates and compares three methods for controlling the Type I error rate for all possible simple interaction contrasts following a statistically significant interaction, including a proposed modification to the Bonferroni procedure that increases the power of…

  12. Design and analysis of a cogeneration plant using heat recovery of a cement factory

    OpenAIRE

    2015-01-01

    There is a more potential in a cement factory for electric power generation using waste heat recovery compared to the other industries. A case study has been done at a cement factory having two units, 1600 TPD and 5500 TPD, identified three waste heat rejections at 176 °C, 330 °C and 420 °C and designed a suitable power plant configuration. In this work, an attempt has been made to quantify the power generation capacity with plant analysis. It has been resulted that 12.5 MW of power can be pr...

  13. A quality by design approach to optimization of emulsions for electrospinning using factorial and D-optimal designs.

    Science.gov (United States)

    Badawi, Mariam A; El-Khordagui, Labiba K

    2014-07-16

    Emulsion electrospinning is a multifactorial process used to generate nanofibers loaded with hydrophilic drugs or macromolecules for diverse biomedical applications. Emulsion electrospinnability is greatly impacted by the emulsion pharmaceutical attributes. The aim of this study was to apply a quality by design (QbD) approach based on design of experiments as a risk-based proactive approach to achieve predictable critical quality attributes (CQAs) in w/o emulsions for electrospinning. Polycaprolactone (PCL)-thickened w/o emulsions containing doxycycline HCl were formulated using a Span 60/sodium lauryl sulfate (SLS) emulsifier blend. The identified emulsion CQAs (stability, viscosity and conductivity) were linked with electrospinnability using a 3(3) factorial design to optimize emulsion composition for phase stability and a D-optimal design to optimize stable emulsions for viscosity and conductivity after shifting the design space. The three independent variables, emulsifier blend composition, organic:aqueous phase ratio and polymer concentration, had a significant effect (pquality in electrospinnable emulsions, allowing development of hydrophilic drug-loaded nanofibers with desired morphological characteristics.

  14. Redirector: designing cell factories by reconstructing the metabolic objective.

    Directory of Open Access Journals (Sweden)

    Graham Rockwell

    Full Text Available Advances in computational metabolic optimization are required to realize the full potential of new in vivo metabolic engineering technologies by bridging the gap between computational design and strain development. We present Redirector, a new Flux Balance Analysis-based framework for identifying engineering targets to optimize metabolite production in complex pathways. Previous optimization frameworks have modeled metabolic alterations as directly controlling fluxes by setting particular flux bounds. Redirector develops a more biologically relevant approach, modeling metabolic alterations as changes in the balance of metabolic objectives in the system. This framework iteratively selects enzyme targets, adds the associated reaction fluxes to the metabolic objective, thereby incentivizing flux towards the production of a metabolite of interest. These adjustments to the objective act in competition with cellular growth and represent up-regulation and down-regulation of enzyme mediated reactions. Using the iAF1260 E. coli metabolic network model for optimization of fatty acid production as a test case, Redirector generates designs with as many as 39 simultaneous and 111 unique engineering targets. These designs discover proven in vivo targets, novel supporting pathways and relevant interdependencies, many of which cannot be predicted by other methods. Redirector is available as open and free software, scalable to computational resources, and powerful enough to find all known enzyme targets for fatty acid production.

  15. Industry Standards for Technological Design and Construction Drawing Design of Rubber Factories Carried Out on August 1

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    On May 18, Ministry of Industry and Information Technology approved 2 industry standards of Rules of Technological Design Technology of Rubber Factories(HG/T 21558-2011) and Rules of Rubber Factories Construction Drawing Design Document Content and Depth (HG/T 21511-2011), which are to be carried out on August 1.

  16. HPLC/DAD determination of rosmarinic acid in Salvia officinalis: sample preparation optimization by factorial design

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Karina B. de [Universidade Federal do Parana (UFPR), Curitiba, PR (Brazil). Dept. de Farmacia; Oliveira, Bras H. de, E-mail: bho@ufpr.br [Universidade Federal do Parana (UFPR), Curitiba, PR (Brazil). Dept. de Quimica

    2013-01-15

    Sage (Salvia officinalis) contains high amounts of the biologically active rosmarinic acid (RA) and other polyphenolic compounds. RA is easily oxidized, and may undergo degradation during sample preparation for analysis. The objective of this work was to develop and validate an analytical procedure for determination of RA in sage, using factorial design of experiments for optimizing sample preparation. The statistically significant variables for improving RA extraction yield were determined initially and then used in the optimization step, using central composite design (CCD). The analytical method was then fully validated, and used for the analysis of commercial samples of sage. The optimized procedure involved extraction with aqueous methanol (40%) containing an antioxidant mixture (ascorbic acid and ethylenediaminetetraacetic acid (EDTA)), with sonication at 45 deg C for 20 min. The samples were then injected in a system containing a C{sub 18} column, using methanol (A) and 0.1% phosphoric acid in water (B) in step gradient mode (45A:55B, 0-5 min; 80A:20B, 5-10 min) with flow rate of 1.0 mL min-1 and detection at 330 nm. Using this conditions, RA concentrations were 50% higher when compared to extractions without antioxidants (98.94 {+-} 1.07% recovery). Auto-oxidation of RA during sample extraction was prevented by the use of antioxidants resulting in more reliable analytical results. The method was then used for the analysis of commercial samples of sage. (author)

  17. Designing learning experiences

    National Research Council Canada - National Science Library

    Collins, Jannette

    2007-01-01

    Creation of significant learning experiences follows basic steps of instructional design related to situational factors, goals and objectives, feedback and evaluation methods, teaching and learning...

  18. Status of the Super-B factory Design

    Energy Technology Data Exchange (ETDEWEB)

    Wittmer, W.; /Michigan State U.; Bertsche, K.; Chao, A.; Novokhatski, A.; Nosochkov, Y.; Seeman, J.; Sullivan, M.K.; Wienands, U.; Weathersby, S.; /SLAC; Bogomyagkov, A.V.; Levichev, E.; Nikitin, S.; Piminov, P.; Shatilov, D.; Sinyatkin, S.; Vobly, P.; Okunev, I.N.; /Novosibirsk, IYF; Bolzon, B.; Brunetti, L.; Jeremie, A.; /Annecy, LAPP; Biagini, M.E.; /Frascati /INFN, Pisa /Pisa U. /INFN, Genoa /Genoa U. /CERN /Orsay, LAL /LPSC, Grenoble /Saclay

    2012-05-18

    The SuperB international team continues to optimize the design of an electron-positron collider, which will allow the enhanced study of the origins of flavor physics. The project combines the best features of a linear collider (high single-collision luminosity) and a storage-ring collider (high repetition rate), bringing together all accelerator physics aspects to make a very high luminosity of 10{sup 36} cm{sup -2} sec{sup -1}. This asymmetric-energy collider with a polarized electron beam will produce hundreds of millions of B-mesons at the Y(4S) resonance. The present design is based on extremely low emittance beams colliding at a large Piwinski angle to allow very low {beta}{sub y} without the need for ultra short bunches. Use of crab-waist sextupoles will enhance the luminosity, suppressing dangerous resonances and allowing for a higher beam-beam parameter. The project has flexible beam parameters, improved dynamic aperture, and spin-rotators in the Low Energy Ring for longitudinal polarization of the electron beam at the Interaction Point. Optimized for best colliding-beam performance, the facility may also provide high-brightness photon beams for synchrotron radiation applications.

  19. Proton linac of the Moscow meson factory for the ADTT experiments

    Energy Technology Data Exchange (ETDEWEB)

    Kravchuk, L.V. [Russian Academy of Sciences, Moscow (Russian Federation). Inst. for Nuclear Research

    1997-09-01

    The accelerator-driven transmutation technology (ADTT) has attracted a lot of attention to eliminate long lived actinides and fission products, including plutonium. An accelerator creates an intense source of spallation neutrons at the blanket by bombarding a heavy metal target with high energy protons of about 800 MeV. The Moscow Meson Factory (MMF) proton linac and experimental hall could be used for the ADTT experiments. 4 refs., 1 fig.

  20. SuperB A High-Luminosity Asymmetric $e^+ e^-$ Super Flavour Factory : Conceptual Design Report

    CERN Document Server

    Bona, M.; Grauges Pous, E.; Colangelo, P.; De Fazio, F.; Palano, A.; Manghisoni, M.; Re, V.; Traversi, G.; Eigen, G.; Venturini, M.; Soni, N.; Bruschi, M.; De Castro, S.; Faccioli, P.; Gabrieli, A.; Giacobbe, B.; Semprini Cesare, N.; Spighi, R.; Villa, M.; Zoccoli, A.; Hearty, C.; McKenna, J.; Soni, A.; Khan, A.; Barniakov, A.Y.; Barniakov, M.Y.; Blinov, V.E.; Druzhinin, V.P.; Golubev, V.B.; Kononov, S.A.; Koop, I.A.; Kravchenko, E.A.; Levichev, E.B.; Nikitin, S.A.; Onuchin, A.P.; Piminov, P.A.; Serednyakov, S.I.; Shatilov, D.N.; Skovpen, Y.I.; Solodov, E.A.; Cheng, C.H.; Echenard, B.; Fang, F.; Hitlin, D.J.; Porter, F.C.; Asner, D.M.; Pham, T.N.; Fleischer, R.; Giudice, G.F.; Hurth, T.; Mangano, M.; Mancinelli, G.; Meadows, B.T.; Schwartz, A.J.; Sokoloff, M.D.; Soffer, A.; Beard, C.D.; Haas, T.; Mankel, R.; Hiller, G.; Ball, P.; Pappagallo, M.; Pennington, M.R.; Gradl, W.; Playfer, S.; Abada, A.; Becirevic, D.; Descotes-Genon, S.; Pene, O.; Andreotti, D.; Andreotti, M.; Bettoni, D.; Bozzi, C.; Calabresi, R.; Cecchi, A.; Cibinetto, G.; Franchini, P.; Luppi, E.; Negrini, M.; Petrella, A.; Piemontese, L.; Prencipe, E.; Santoro, V.; Stancari, G.; Anulli, F.; Baldini-Ferroli, R.; Biagini, M.E.; Boscolo, M.; Calcaterra, A.; Drago, A.; Finocchiaro, G.; Guiducci, S.; Isidori, G.; Pacetti, S.; Patteri, P.; Peruzzi, I.M.; Piccolo, M.; Preger, M.A.; Raimondi, P.; Rama, M.; Vaccarezza, C.; Zallo, A.; Zobov, M.; De Sangro, R.; Buzzo, A.; Lo Vetere, M.; Macri, M.; Monge, M.R.; Passaggio, S.; Patrignani, C.; Robutti, E.; Tosi, S.; Matias, J.; Panduro Vazquez, W.; Borzumati, F.; Eyges, V.; Prell, S.A.; Pedlar, T.K.; Korpar, S.; Pestonik, R.; Staric, M.; Neubert, M.; Denig, A.G.; Nierste, U.; Agoh, T.; Ohmi, K.; Ohnishi, Y.; Fry, J.R.; Touramanis, C.; Wolski, A.; Golob, B.; Krizan, P.; Flaecher, H.; Bevan, A.J.; Di Lodovico, F.; George, K.A.; Barlow, R.; Lafferty, G.; Jawahery, A.; Roberts, D.A.; Simi, G.; Patel, P.M.; Robertson, S.H.; Lazzaro, A.; Palombo, F.; Kaidalov, A.; Buras, A.J.; Tarantino, C.; Buchalla, G.; Sanda, A.I.; D'Ambrosio, G.; Ricciardi, G.; Bigi, I.; Jessop, C.P.; Losecco, J.M.; Honscheid, K.; Arnaud, N.; Chehab, R.; Fedala, Y.; Polci, F.; Roudeau, P.; Sordini, V.; Soskov, V.; Stocchi, A.; Variola, A.; Vivoli, A.; Wormser, G.; Zomer, F.; Bertolin, A.; Brugnera, R.; Gagliardi, N.; Gaz, A.; Margoni, M.; Morandin, M.; Posocco, M.; Rotondo, M.; Simonetto, F.; Stroili, R.; Bonneaud, G.R.; Lombardo, V.; Calderini, G.; Ratti, L.; Speziali, V.; Biasini, M.; Covarelli, R.; Manoni, E.; Servoli, L.; Angelini, C.; Batignani, G.; Bettarini, S.; Bosi, F.; Carpinelli, M.; Cenci, R.; Cervelli, A.; Dell'Orso, M.; Forti, F.; Giannetti, P.; Giorgi, M.; Lusiani, A.; Marchiori, G.; Massa, M.; Mazur, M.A.; Morsani, F.; Neri, N.; Paoloni, E.; Raffaelli, F.; Rizzo, G.; Walsh, J.; Braun, V.; Lenz, A.; Adams, G.S.; Danko, I.Z.; Baracchini, E.; Bellini, F.; Cavoto, G.; D'Orazio, A.; Del Re, D.; Di Marco, E.; Faccini, R.; Ferrarotto, F.; Gaspero, Mario; Jackson, P.; Martinelli, G.; Mazzoni, M.A.; Morganti, Silvio; Piredda, G.; Renga, F.; Silvestrini, L.; Voena, C.; Catani, L.; Di Ciaccio, A.; Messi, R.; Santovetti, E.; Satta, A.; Ciuchini, M.; Lubicz, V.; Wilson, F.F.; Godang, R.; Chen, X.; Liu, H.; Park, W.; Purohit, M.; Trivedi, A.; White, R.M.; Wilson, J.R.; Allen, M.T.; Aston, D.; Bartoldus, R.; Brodsky, S.J.; Cai, Y.; Coleman, J.; Convery, M.R.; DeBarger, S.; Dingfelder, J.C.; Dubois-Felsmann, G.P.; Ecklund, S.; Fisher, A.S.; Haller, G.; Heifets, S.A.; Kaminski, J.; Kelsey, M.H.; Kocian, M.L.; Leith, D.W.G.S.; Li, N.; Luitz, S.; Luth, V.; MacFarlane, D.; Messner, R.; Muller, D.R.; Nosochkov, Y.; Novokhatski, A.; Pivi, M.; Ratcliff, B.N.; Roodman, A.; Schwiening, J.; Seeman, J.; Snyder, A.; Sullivan, M.; Va'Vra, J.; Wienands, U.; Wisniewski, W.; Stoeck, H.; Cheng, H.Y.; Li, H.N.; Keum, Y.Y.; Gronau, M.; Grossman, Y.; Bianchi, F.; Gamba, D.; Gambino, P.; Marchetto, F.; Menichetti, Ezio A.; Mussa, R.; Pelliccioni, M.; Dalla Betta, G.F.; Bomben, M.; Bosisio, L.; Cartaro, C.; Lanceri, L.; Vitale, L.; Azzolini, V.; Bernabeu, J.; Lopez-March, N.; Martinez-Vidal, F.; Milanes, D.A.; Oyanguren, A.; Paradisi, P.; Pich, A.; Sanchis-Lozano, M.A.; Kowalewski, Robert V.; Roney, J.M.; Back, J.J.; Gershon, T.J.; Harrison, P.F.; Latham, T.E.; Mohanty, G.B.; Petrov, A.A.; Pierini, M.; INFN

    2007-01-01

    The physics objectives of SuperB, an asymmetric electron-positron collider with a luminosity above 10^36/cm^2/s are described, together with the conceptual design of a novel low emittance design that achieves this performance with wallplug power comparable to that of the current B Factories, and an upgraded detector capable of doing the physics in the SuperB environment.

  1. Designing Urban Experiences

    DEFF Research Database (Denmark)

    Jantzen, Christian; Vetner, Mikael

    2008-01-01

    traditional urban planning aspects such as infrastructure, environmental factors and aesthetics, but has also dealt with the design of urban experiences. Through an introduction of the framework of the structure of experiences, this article examines how urban experiences can be understood and analysed...

  2. Hazarding health: experiences of body, work, and risk among factory women in Malaysia.

    Science.gov (United States)

    Root, Robin

    2009-10-01

    In the 1970s, Malaysia launched an export-oriented development strategy as a means of financing the nation's modernization. The success of the strategy hinged significantly on intensive recruitment of women for factory employment. I draw on descriptive qualitative research, including interviews (51), surveys (106), and ethnography in Malaysia to investigate factory women's experiences of work and work-related health risks. Discourse analysis surfaced a latent consciousness of bodily changes in relation to work. A grounded theory analysis showed a compromised access to occupational risk knowledge that may bear negatively on women's well-being and the role women's new labor identities played in mediating the meanings of work and risks. Given the predominance of women workers in low-end manufacturing globally, I aimed to contribute to theoretical and applied understandings of gender, globalization, and health.

  3. Full factorial design, physicochemical characterisation and biological assessment of cyclosporine A loaded cationic nanoparticles.

    Science.gov (United States)

    Hermans, Kris; Van den Plas, Dave; Everaert, Arnout; Weyenberg, Wim; Ludwig, Annick

    2012-09-01

    Cyclosporine A loaded poly(lactide-co-glycolide) nanoparticles coated with chitosan were prepared using the o/w emulsification solvent evaporation method. A 2(3) full factorial design was used to investigate the effect of 3 preparation parameters on the particle size, polydispersity index, zeta potential and drug release. In vitro experiments were performed in order to evaluate the cytotoxicity and anti-inflammatory activity of the developed nanoparticles. Particle sizes varied from 156 nm to 314 nm, and polydispersity index values of 0.07-0.56 were obtained depending on the different preparation parameters. All nanoparticles showed positive zeta potential values. Nanoparticles prepared with the highest concentration chitosan retained a positive zeta potential after dispersion in simulated lachrymal fluid, which supports the possibility of an electrostatic interaction between these particles and the negatively charged mucus layer at the eye. The in vitro release profile of cyclosporine A from the chitosan-coated nanoparticles was strongly dependent on the release medium used. None of the cationic nanoparticle formulations showed significant cytotoxicity compared to the negative control using human epithelial cells (HaCaT). Cyclosporine A encapsulated in the various nanoparticle formulations remained anti-inflammatory active as significant suppression of interleukine-2 secretion in concanavalin A stimulated Jurkat T cells was observed.

  4. Dynamic maceration of Copaifera langsdorffii leaves: a technological study using fractional factorial design

    Directory of Open Access Journals (Sweden)

    Ana R. M. Costa-Machado

    2012-01-01

    Full Text Available The Copaifera langsdorffii Desf., Fabaceae, is a Brazilian native tree, known as copaiba, which oil is commonly used in folk medicine as muscle relaxant, wound healing, antiseptic and anti-inflammatory to respiratory and urinary tracts. Despite of the wide use of the oil of Copaifera species, scientific works related to the study of its leaves are rarely found. In fact, processes for flavonoid extraction from C. langsdorffii leaves have not been studied yet leaving a wide field to be investigated. In this work, the 2(5-2 fractional factorial design was selected in order to study how the factors of a dynamic maceration process influence the responses of total flavonoids, total phenols, quercetrin and afzelin contents, and antioxidant activity in extracts from C. langsdorffii leaves. The results demonstrated that the significant factors studied were the drug load in extractor, the ethanol/water ratio and the stirring speed whereas the temperature and the extraction time were not significant. In conclusion, this study allowed visualizing which factors were considered the most important in copaiba leaves dynamic maceration and their effect in extract antioxidant activity. Furthermore, this technological study gives directions to optimize future extraction experiments from C. langsdorffii.

  5. Study on bio-ethanol production from oil palm (Elaies Guineensis) trunks sap using factorial design

    Energy Technology Data Exchange (ETDEWEB)

    Norhazimah, A. H.; Che Ku, M. Faizala [Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang (Malaysia)], email: amfaizal@ump.edu.my

    2011-07-01

    Oil palm (Elaies Guineensis) trunks (OPT), a waste generated from the re-plantation of oil palm trees for palm oil production, contain useful fermentable sugar for bio-ethanol production, and are a very important biomass material for future energy production. The fermentation usually can be affected along several parameters: temperature, pH, agitation rate, percentage inoculums, time of incubation, nitrogen sources, age of the inoculums and other chemical and physical factors. Since identifying all the effects of a particular factor on the fermentation process is impractical for reasons of time and cost, the approach of this study was based on a two-level five-factor (25) full factorial design (FFD) in order to identify the independent parameters for screening experiment purposes and determine the range of levels of the factor as well as the regions for optimization. The results from this study showed that the most influential principal factors affecting ethanol concentration and productivity were temperature, followed by initial pH and agitation rate.

  6. Dynamic maceration of Copaifera langsdorffii leaves: a technological study using fractional factorial design

    Directory of Open Access Journals (Sweden)

    Ana R. M. Costa-Machado

    2013-02-01

    Full Text Available The Copaifera langsdorffii Desf., Fabaceae, is a Brazilian native tree, known as copaiba, which oil is commonly used in folk medicine as muscle relaxant, wound healing, antiseptic and anti-inflammatory to respiratory and urinary tracts. Despite of the wide use of the oil of Copaifera species, scientific works related to the study of its leaves are rarely found. In fact, processes for flavonoid extraction from C. langsdorffii leaves have not been studied yet leaving a wide field to be investigated. In this work, the 2(5-2 fractional factorial design was selected in order to study how the factors of a dynamic maceration process influence the responses of total flavonoids, total phenols, quercetrin and afzelin contents, and antioxidant activity in extracts from C. langsdorffii leaves. The results demonstrated that the significant factors studied were the drug load in extractor, the ethanol/water ratio and the stirring speed whereas the temperature and the extraction time were not significant. In conclusion, this study allowed visualizing which factors were considered the most important in copaiba leaves dynamic maceration and their effect in extract antioxidant activity. Furthermore, this technological study gives directions to optimize future extraction experiments from C. langsdorffii.

  7. Improvement of biomass production and glucoamylase activity by Candida famata using factorial design.

    Science.gov (United States)

    Mosbah, Habib; Aissa, Imen; Hassad, Nahla; Farh, Dhaker; Bakhrouf, Amina; Achour, Sami

    2016-07-01

    To improve biomass production and glucoamylase activity (GA) by Candida famata, culture conditions were optimized. A 2(3) full factorial design (FFD) with a response surface model was used to evaluate the effects and interactions of pH (X1 ), time of cultivation (X2 ), and starch concentration (X3 ) on the biomass production and enzyme activity. A total of 16 experiments were conducted toward the construction of an empiric model and a first-order equation. It was found that all factors (X1 , X2 , and X3 ) and their interactions were significant at a certain confidence level (P biomass production and GA of C. famata. Under this optimized medium, the experimental biomass production and GA obtained were 1.8 ± 0.54 g/L and 0.078 ± 0.012 µmol/L/Min, about 1.5- and 1.8-fold, respectively, higher than those in basal medium. The (R(2) ) coefficients obtained were 0.997 and 0.990, indicating an adequate degree of reliability in the model. Approximately 99% of validity of the predicted value was achieved.

  8. Experimenting with a design experiment

    Directory of Open Access Journals (Sweden)

    Bakker, Judith

    2012-12-01

    Full Text Available The design experiment is an experimental research method that aims to help design and further develop new (policy instruments. For the development of a set of guidelines for the facilitation of citizens’ initiatives by local governments, we are experimenting with this method. It offers good opportunities for modeling interventions by testing their instrumental validity –the usefulness for the intended practical purposes. At the same time design experiments are also useful for evaluating the empirical validity of theoretical arguments and the further development of these arguments in the light of empirical evidence (by using e.g. the technique of pattern matching. We describe how we have applied this methodology in two cases and discuss our research approach. We encountered some unexpected difficulties, especially in the cooperation with professionals and citizens. These difficulties complicate the valid attribution of causal effects to the use of the new instrument. However, our preliminary conclusion is that design experiments are useful in our field of study

    El experimento de diseño es un método de investigación experimental que tiene como objetivo diseñar y desarrollar posteriormente nuevas herramientas (políticas. En este artículo experimentamos con este método para desarrollar un conjunto de directrices que permitan a los gobiernos locales facilitar las iniciativas ciudadanas. El método ofrece la oportunidad de modelar las intervenciones poniendo a prueba su validez instrumental (su utilidad para el fin práctico que se proponen. Al mismo tiempo, los experimentos de diseño son útiles también para evaluar la validez empírica de las discusiones teóricas y el posterior desarrollo de esas discusiones a la luz de la evidencia empírica (usando, por ejemplo, técnicas de concordancia de patrones. En este trabajo describimos cómo hemos aplicado este método a dos casos y discutimos nuestro enfoque de

  9. Factorial design approach for optimization of floating microspheres of diltiazem hydrochloride

    Directory of Open Access Journals (Sweden)

    Mangal Singh Panwar

    2015-01-01

    Full Text Available The aim of this study was to perform optimization of floating microspheres of diltiazem hydrochloride for the prolongation of gastric residence time. The microspheres were prepared by a nonaqueous solvent evaporation method using polycarbonate. A full factorial design was applied to optimize the formulation. Preliminary studies revealed that the concentration of polymer and stirring speed significantly affected the characteristics of floating microspheres. The optimum batch of microsphere exhibited smooth surfaces with good flow and packing properties, prolonged sustained drug release, remained buoyant for more than 10 h, high entrapment efficiency up to 97% w/w. Scanning electron microscopy confirmed the hollow structure with particle size in the order of 190 μm. The studies revealed that the increase in concentration of polycarbonate increased the drug release from the floating microspheres. The results of two third full factorial design revealed that the concentration of polycarbonate (X1 and stirring speed (X2 significantly affected drug entrapment efficiency, percentage release.

  10. Application of Factorial Design for Gas Parameter Optimization in CO2 Laser Welding

    DEFF Research Database (Denmark)

    Gong, Hui; Dragsted, Birgitte; Olsen, Flemming Ove

    1997-01-01

    The effect of different gas process parameters involved in CO2 laser welding has been studied by applying two-set of three-level complete factorial designs. In this work 5 gas parameters, gas type, gas flow rate, gas blowing angle, gas nozzle diameter, gas blowing point-offset, are optimized...... to be a very useful tool for parameter optimi-zation in laser welding process. Keywords: CO2 laser welding, gas parameters, factorial design, Analysis of Variance........ The bead-on-plate welding specimens are evaluated by a number of quality char-acteristics, such as the penetration depth and the seam width. The significance of the gas pa-rameters and their interactions are based on the data found by the Analysis of Variance-ANOVA. This statistic methodology is proven...

  11. Full factorial design analysis of carbon nanotube polymer-cement composites

    Directory of Open Access Journals (Sweden)

    Fábio de Paiva Cota

    2012-08-01

    Full Text Available The work described in this paper is related to the effect of adding carbon nanotubes (CNT on the mechanical properties of polymer-cement composites. A full factorial design has been performed on 160 samples to identify the contribution provided by the following factors: polymeric phase addition, CNT weight addition and water/cement ratio. The response parameters of the full factorial design were the bulk density, apparent porosity, compressive strength and elastic modulus of the polymer-cement-based nanocomposites. All the factors considered in this analysis affected significantly the bulk density and apparent porosity of the composites. The compressive strength and elastic modulus were affected primarily by the cross-interactions between polymeric phase and CNT additions, and the water/cement ratio with polymeric phase factors.

  12. Study of formulation variables on properties of glipizide mucoadhesive microspheres by factorial design

    OpenAIRE

    Hosmani A.H; Kasture, P. V.; ID Gonjari; A.B. Karmarkar

    2009-01-01

    "nBackground and the Purpose of the study:The purpose of the study was formulate and systemsystematic evaluation in-vitro and in-vivo behaviour of Glipizide mucoadhesive microspheres using 32 full factorial design. "nMethods:Concentration of Polycarbophil and Sodium Alginate were selected as independent variables and the effects were checked on dependent variables like swelling index, mucoadhesion, drug entrapment efficiency and T75. In vivo studies were also performed to determine ...

  13. Development of standardized extractive solution from Lippia sidoides by factorial design and their redox active profile

    Directory of Open Access Journals (Sweden)

    Bruno S. Lima

    2015-06-01

    Full Text Available AbstractThe aim of this study was to evaluate the influences of variables of preparation on total flavonoids content from extractive solution of Lippia sidoides Cham., Verbenaceae. Thus a 23 factorial design was used to study the importance of plant proportion, the extraction method and solvent on the extraction of flavonoid. The methodology of determination of chemicals in factorial design was validated according to the parameters required by Brazilian Health Agency. The extraction solution was selected through a full factorial design where the best conditions to achieve the highest content of flavonoids were: 7.5% (w/v of plant with ethanol 50% (v/v as solvent. The polyphenols content was determined by LC method and its relationship with the antioxidant and free radical scavenging activities was evaluated. The free radical scavenging activities and antioxidant potentials were determined for different concentrations using various in vitro models. Our results indicate that extracts exhibited a significant dose-dependent antioxidant effect as evaluated by TRAP/TAR assays. Besides, we observed an antioxidant activity against hydroxyl radicals and nitric oxide, and protection against lipid peroxidation in vitro. Our results suggest that the extract presents significant in vitro antioxidant potential indicating promising perspectives for its use as pharmaceutical/or food additive.

  14. Democratic design experiments

    DEFF Research Database (Denmark)

    Ehn, Pelle; Brandt, Eva; Halse, Joachim

    2016-01-01

    we here see design engagements which are both controversial in their commitment to agendas of social change and experimental in the sense that they openly probe for what can possibly be enacted. In this conversation we want to explore how such engagements may be seen as democratic design experiments...

  15. Democratic design experiments

    DEFF Research Database (Denmark)

    Ehn, Pelle; Brandt, Eva; Halse, Joachim

    2016-01-01

    we here see design engagements which are both controversial in their commitment to agendas of social change and experimental in the sense that they openly probe for what can possibly be enacted. In this conversation we want to explore how such engagements may be seen as democratic design experiments...

  16. Optimization of thiamethoxam adsorption parameters using multi-walled carbon nanotubes by means of fractional factorial design.

    Science.gov (United States)

    Panić, Sanja; Rakić, Dušan; Guzsvány, Valéria; Kiss, Erne; Boskovic, Goran; Kónya, Zoltán; Kukovecz, Ákos

    2015-12-01

    The aim of this work was to evaluate significant factors affecting the thiamethoxam adsorption efficiency using oxidized multi-walled carbon nanotubes (MWCNTs) as adsorbents. Five factors (initial solution concentration of thiamethoxam in water, temperature, solution pH, MWCNTs weight and contact time) were investigated using 2V(5-1) fractional factorial design. The obtained linear model was statistically tested using analysis of variance (ANOVA) and the analysis of residuals was used to investigate the model validity. It was observed that the factors and their second-order interactions affecting the thiamethoxam removal can be divided into three groups: very important, moderately important and insignificant ones. The initial solution concentration was found to be the most influencing parameter on thiamethoxam adsorption from water. Optimization of the factors levels was carried out by minimizing those parameters which are usually critical in real life: the temperature (energy), contact time (money) and weight of MWCNTs (potential health hazard), in order to maximize the adsorbed amount of the pollutant. The results of maximal adsorbed thiamethoxam amount in both real and optimized experiments indicate that among minimized parameters the adsorption time is one that makes the largest difference. The results of this study indicate that fractional factorial design is very useful tool for screening the higher number of parameters and reducing the number of adsorption experiments.

  17. A Preliminary Interaction Region Design for a Super B-Factory

    CERN Document Server

    Sullivan, Michael K; Donald, Martin; Ecklund, Stanley; Novokhatski, Alexander; Seeman, John; Wienands, Ulrich

    2005-01-01

    The success of the two B-Factories (PEP-II and KEKB) has encouraged us to look at design parameters for a B-Factory with a 30-50 times increase in the luminosity of the present machines (L~1e36). In order to achieve this high luminosity, the beta y* values are reduced to 3-2 mm, the bunch spacing is minimized (0.6-0.3 m) and the bunch currents are increased. Total beam currents range from 5-25 A. The interaction region (IR) of these "SuperB" designs presents special challenges. Synchrotron radiation fans from local bending in shared magnets and from upstream sources pose difficulties due to the high power levels in these fans. High-order-mode(HOM)heating, effects that have been seen in the present B-factories, will become much more pronounced with the very short bunches and high beam currents. Masking the detector beam pipe from synchrotron radiation must take into account effects of HOM power generation. Backgrounds that are a function of the luminosity will become very important. We presen...

  18. Future experiments with neutrino superbeams, beta-beams, and neutrino factories

    Energy Technology Data Exchange (ETDEWEB)

    Deborah A Harris

    2003-10-27

    This report describes the goals of the next generations of accelerator-based neutrino experiments, and the various strategies that are being considered to achieve those goals. Because these next steps in the field are significantly different from the current or previous steps, novel techniques must be considered for both the detectors and the neutrino beams themselves. We consider not only conventional neutrino beams created by decays of pions, but also those which could be made by decays of beams of relativistic isotopes (so-called ''beta-beams'') and also by decays of beams of muons (neutrino factories).

  19. Statistically designed experiments to screen chemical mixtures for possible interactions

    NARCIS (Netherlands)

    Groten, J.P.; Tajima, O.; Feron, V.J.; Schoen, E.D.

    1998-01-01

    For the accurate analysis of possible interactive effects of chemicals in a defined mixture, statistical designs are necessary to develop clear and manageable experiments. For instance, factorial designs have been successfully used to detect two-factor interactions. Particularly useful for this purp

  20. Statistically designed experiments to screen chemical mixtures for possible interactions

    NARCIS (Netherlands)

    Groten, J.P.; Tajima, O.; Feron, V.J.; Schoen, E.D.

    1998-01-01

    For the accurate analysis of possible interactive effects of chemicals in a defined mixture, statistical designs are necessary to develop clear and manageable experiments. For instance, factorial designs have been successfully used to detect two-factor interactions. Particularly useful for this purp

  1. Analyzing the shape parameter effects on the performance of the mixed-flow fan using CFD and Factorial design

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Uk Hee; Kim, Joon Hyung; Kim, Sung; Kim, Jin Hyuk; Choi, Young Seok [Korea Institute of Industrial Technology, Cheonan (Korea, Republic of)

    2016-03-15

    Fans are representative turbo-machinery widely used for ventilation throughout the industrial world. Recently, as the importance of energy saving has been magnified with the fans, the demand for the fans with high efficiency and performance has been increasing. The representative method for enhancing the performance includes design optimization; in practice, fan performance can be improved by changing the shape parameters such as those of meridional plane, impeller, and diffuser. Before optimizing the efficient design, a process of screening to select important design parameters is essential. The present study aimed to analyze the effects of mixed-flow fans' shape parameters on fan performance (static pressure and fan static efficiency) and derive optimum models based on the results. In this study, the shape parameters considered in the impeller domain are as follows: tip clearance, number of blades, beta angle of Leading edge (LE) in the blade, and beta angle of Trailing edge (TE) in the blade. The shape parameters considered in the diffuser domain are as follows: meridional length of the Guide vane (GV), number of GV, beta angle of LE in the GV and beta angle of TE in the GV. The effects of individual shape parameters were analyzed using the CFD (Computational fluid dynamic) and DOE (Design of experiments) methods. The reliability of CFD was verified through the comparison between preliminary fan model's experiment results and CFD results, and screening processes were implemented through 24-1 fractional factorial design. From the analysis of DOE results, it could be seen that the tip clearance and the number of blades in the impeller domain greatly affected the fan performance, and the beta angle of TE at the GV in the diffuser domain greatly affected the fan performance. Finally, the optimum models with improved fan performance were created using linear regression equations derived from 24-1 fractional factorial design.

  2. Nanostructured lipid carriers as a potential vehicle for Carvedilol delivery: Application of factorial design approach.

    Science.gov (United States)

    Patil, Ganesh B; Patil, Nandkishor D; Deshmukh, Prashant K; Patil, Pravin O; Bari, Sanjay B

    2016-01-01

    Present invention relates to design of nanostructured lipid carriers (NLC) to augment oral bioavailability of Carvedilol (CAR). In this attempt, formulations of CAR-NLCs were prepared with glyceryl-monostearate (GMS) as a lipid, poloxamer 188 as a surfactant and tween 80 as a co-surfactant using high pressure homogenizer by 2(3) factorial design approach. Formed CAR-NLCs were assessed for various performance parameters. Accelerated stability studies demonstrated negligible change in particle size and entrapment efficiency, after storage at specified time up to 3 months. The promising findings in this investigation suggest the practicability of these systems for enhancement of bioavailability of drugs like CAR.

  3. Formulation Optimization of Rosuvastatin Calcium-Loaded Solid Lipid Nanoparticles by 32 Full-Factorial Design

    Directory of Open Access Journals (Sweden)

    Kruti A. Dhoranwala

    2015-12-01

    Full Text Available The present investigation was aimed at developing Rosuvastatin Calcium loaded solid lipid nanoparticles (SLNs. The SLNs were prepared using high pressure homogenization technique. Glyceryl monostearate (GMS and Poloxamer 188 were employed as lipid carrier and surfactant respectively. A two factor, three level (32 full factorial design was applied to study the effect of independent variables i.e. amount of GMS (X1 and amount of Poloxamer 188 (X2 on dependent variables i.e. Particle size (Y1 and % entrapment efficiency (Y2. Particles size, % entrapment efficiency (%EE, zeta potential, drug content, in vitro drug release and particles morphology were evaluated for SLNs. Contour plots and response surface plots showed visual representation of relationship between the experimental responses (dependent variables and the set of input (independent variables. The adequacy of the regression model was verified by a check point analysis. The optimized batch (B10 contained 2.2 gm of GMS and 1% of Poloxamer 188. Batch B 10 exhibited mean particle size of 529.6 nm ± 6.36 nm; polydispersity index (PDI of 0.306 ± 0.042; zeta potential of -31.88 mV ± (-2.50 mV and %EE of 48.90% ± 1.72%. The drug release experiments exhibited an initial rapid release followed by sustained release extended upto 36 h. Differential scanning calorimetry (DSC studies showed that there was no chemical interaction between drug (Rosuvastatin Calcium and lipid (GMS whereas scanning electron microscopy (SEM studies indicated that Rosuvastatin Calcium loaded SLNs are spherical, discrete and homogenous. Accelerated stability studies showed that there was no significant change occurring in the responses after storage for a total period of 3 months.

  4. Design and analysis of a cogeneration plant using heat recovery of a cement factory

    Directory of Open Access Journals (Sweden)

    G.V. Pradeep Varma

    2015-03-01

    Full Text Available There is a more potential in a cement factory for electric power generation using waste heat recovery compared to the other industries. A case study has been done at a cement factory having two units, 1600 TPD and 5500 TPD, identified three waste heat rejections at 176 °C, 330 °C and 420 °C and designed a suitable power plant configuration. In this work, an attempt has been made to quantify the power generation capacity with plant analysis. It has been resulted that 12.5 MW of power can be produced with the available heat recovery against a cement factory demand of 15 MW. The available process heat for cement production and power generation has been estimated at a capacity range from 5000 to 9000 TPD. The analysis recommended a low steam pressure for power generation at above said heat recovery gas temperature.

  5. Automated array assembly. Quarterly report No. 5. [Cost analysis and factory design

    Energy Technology Data Exchange (ETDEWEB)

    D' Aiello, R.V.

    1977-10-01

    During this quarter, an interim 1982 factory was designed for the large-scale production of silicon solar cell array modules. The boundary conditions for this design are the use of Czochralski silicon crystals and $25/kg polycrystalline silicon. The objective is a large-scale production facility to meet an intermediate ERDA cost goal of $2.00/W in 1982. The approach was to first consider a panel design which could be expected to have a 20-year life and would also meet the JPL specification on mechanical, electrical, and environmental stability. Attention was then directed to a cost analysis of the production of the elements comprising this panel. Since it was expected that wafer production would comprise a major fraction of the cost, several cost reduction schemes were considered for the Czochralski pulling and sawing of the wafers. A solar-cell processing sequence was selected on the basis of our previous cost studies and the projected availability of production equipment by 1982. These criteria resulted in the selection of POCl/sub 3/ gaseous diffusion for junction formation, thick-film Ag screen-printed metallization, spray-on antireflection (AR) coating, and solder reflow interconnect technology. The economic study was made by computer analysis of the cost elements of these process sequences at production levels ranging from 3 to 100 MW/yr. With the results of this study, a 30-MW/yr factory was designed, and a preliminary floor plan layout is given. A manufacturing cost of $2.01/W is projected and, including factory overhead and profit, a selling price of $2.27/W is projected.

  6. DESIGN AND LAYOUT CONCEPTS FOR COMPACT, FACTORY-PRODUCED, TRANSPORTABLE, GENERATION IV REACTOR SYSTEMS

    Energy Technology Data Exchange (ETDEWEB)

    Mynatt Fred R.; Townsend, L.W.; Williamson, Martin; Williams, Wesley; Miller, Laurence W.; Khan, M. Khurram; McConn, Joe; Kadak, Andrew C.; Berte, Marc V.; Sawhney, Rapinder; Fife, Jacob; Sedler, Todd L.; Conway, Larry E.; Felde, Dave K.

    2003-11-12

    The purpose of this research project is to develop compact (100 to 400 MWe) Generation IV nuclear power plant design and layout concepts that maximize the benefits of factory-based fabrication and optimal packaging, transportation and siting. The reactor concepts selected were compact designs under development in the 2000 to 2001 period. This interdisciplinary project was comprised of three university-led nuclear engineering teams identified by reactor coolant type (water, gas, and liquid metal) and a fourth Industrial Engineering team. The reactors included a Modular Pebble Bed helium-cooled concept being developed at MIT, the IRIS water-cooled concept being developed by a team led by Westinghouse Electric Company, and a Lead-Bismuth-cooled concept developed by UT. In addition to the design and layout concepts this report includes a section on heat exchanger manufacturing simulations and a section on construction and cost impacts of proposed modular designs.

  7. Application of Full Factorial Experimental Design and Response Surface Methodology for Chromite Beneficiation by Knelson Concentrator

    Directory of Open Access Journals (Sweden)

    Gul Akar Sen

    2016-01-01

    Full Text Available The present work is undertaken to determine the effect of operational variables, namely: feed rate, centrifugal force and fluidization water flow rate on the efficiency of Knelson concentrator for chromite ore beneficiation. A full factorial design with three factors at three levels and response surface methodology (RSM were applied for this purpose. The quadratic models were developed to predict the concentrate Cr2O3 grade and recovery as the process responses. The results suggest that all the variables affect the grade and recovery of the Cr2O3 concentrate to some degree. However, the fluidization water rate was found as the most effective parameter.

  8. Factorial design analysis for COD removal from landfill leachate by photoassisted Fered-Fenton process.

    Science.gov (United States)

    Wu, Xiaogang; Zhang, Hui; Li, Yanli; Zhang, Daobin; Li, Xianwang

    2014-01-01

    The Fered-Fenton process has been shown to be an effective method for leachate treatment, but it still faces problems of inadequate regeneration of ferrous ion. However, the use of the photoassisted Fered-Fenton process could overcome this difficulty and improve the efficiency of chemical oxygen demand (COD) removal since photoassisted Fered-Fenton process induces the production of hydroxyl radicals from the regeneration of ferrous ions and the reaction of hydrogen peroxide with UV light. As there are so many operating parameters in photoassisted Fered-Fenton process, it is necessary to develop a mathematical model in order to produce the most economical process. In the present study, a factorial design was carried out to evaluate leachate treatment by photoassisted Fered-Fenton process. The influence of the following variables: H₂O₂ concentration, Fe(2+) concentration, current density, and initial pH in the photoassisted Fered-Fenton process was investigated by measuring COD removal efficiencies after 60-min reaction. The relationship between COD removal and the most significant independent variables was established by means of an experimental design. The H₂O₂ concentration, Fe(2+) concentration, initial pH, and the interaction effect between current density and initial pH were all significant factors. The factorial design models were derived based on the COD removal efficiency results and the models fit the data well.

  9. Application of factorial design to accelerate identification of CHO growth factor requirements.

    Science.gov (United States)

    Chun, Chung; Heineken, Katy; Szeto, Dongmei; Ryll, Thomas; Chamow, Steve; Chung, John D

    2003-01-01

    To accelerate recombinant CHO media and process development, we describe a simple approach to integrating multiple tasks associated with these processes including initial media design, serum-free adaptation, stability analysis and first generation scale-up. Factorial design techniques and normal probability chart representation of the results were first applied to identify potent parental CHO cell growth factors in a lean basal medium. These results were then applied to identify a suitable manufacturing medium from a panel of commercial and proprietary media formulations. When this approach was applied to recombinant CHO cell line, rapid adaptation of the cell line to an appropriate production medium occurred during culture expansion in the presence of the identified growth factor(s). This approach allows media component screening to be naturally integrated into the adaptation and scale-up processes since components that have little or no relative effect on cell proliferation are selected against as the "best" cultures are moved forward. The rapidity of the adaptation process allowed cell line stability studies to be initiated relatively early in the development process, thus providing preliminary stability information by the time the "outgrowing" culture could be scaled to 100-L reactors some 30 days after adaptation commenced. The application of full factorial design techniques allowed us to calculate the maximum number of interaction effects, the interpretation of which we believe can provide insights into growth factor biology.

  10. REGIONAL EXPRESSION IN DESIGN OF INDUSTRIAL FACTORY BUILDINGS: THE PLANNING AND MONOMER DESIGN OF FACTORY AREA FOR HUATAI GROUP%工业厂区建筑设计中的地域性表达——华泰集团安恰厂区规划及单体设计

    Institute of Scientific and Technical Information of China (English)

    王益

    2012-01-01

    工业厂区建筑设计缺乏地域特色会造成视觉的千遍一律。以华泰集团安恰厂区规划及单体设计为例,从总体布局、设计手法与要素和设计中的企业文化表达三个方面,分析如何在工业厂区建筑设计中表达地域性,为设计师设计工业厂区建筑提供一些参考和借鉴。%There are always about the similar and monotonic visions in the design of industrial factory buildings due to lack of regional characteristics. By means of taking the planning and monomer design of factory area for Huatai Group, for example, from the general layout, design skills and element, the enterprise culture expression in design, it was analyzed how to express the regional characteristics in the design of industrial factory buildings, which could provide experience for designers to design industriai factory buildings.

  11. Factorial design studies of antiretroviral drug-loaded stealth liposomal injectable: PEGylation, lyophilization and pharmacokinetic studies

    Science.gov (United States)

    Sudhakar, Beeravelli; Krishna, Mylangam Chaitanya; Murthy, Kolapalli Venkata Ramana

    2016-01-01

    The aim of the present study was to formulate and evaluate the ritonavir-loaded stealth liposomes by using 32 factorial design and intended to delivered by parenteral delivery. Liposomes were prepared by ethanol injection method using 32 factorial designs and characterized for various physicochemical parameters such as drug content, size, zeta potential, entrapment efficiency and in vitro drug release. The optimization process was carried out using desirability and overlay plots. The selected formulation was subjected to PEGylation using 10 % PEG-10000 solution. Stealth liposomes were characterized for the above-mentioned parameters along with surface morphology, Fourier transform infrared spectrophotometer, differential scanning calorimeter, stability and in vivo pharmacokinetic studies in rats. Stealth liposomes showed better result compared to conventional liposomes due to effect of PEG-10000. The in vivo studies revealed that stealth liposomes showed better residence time compared to conventional liposomes and pure drug solution. The conventional liposomes and pure drug showed dose-dependent pharmacokinetics, whereas stealth liposomes showed long circulation half-life compared to conventional liposomes and pure ritonavir solution. The results of statistical analysis showed significance difference as the p value is (<0.05) by one-way ANOVA. The result of the present study revealed that stealth liposomes are promising tool in antiretroviral therapy.

  12. Factorial Design and Development of Solid Lipid Nanoparticles (SLN) for Gene Delivery.

    Science.gov (United States)

    Radaic, Allan; de Paula, Eneida; de Jesus, Marcelo Bispo

    2015-02-01

    Several scientific hurdles still have to be overcome before gene therapy becomes a reality. One of them is the development of safe and efficient gene delivery system. Here, we have employed factorial design to optimize the production of solid lipid nanoparticles (SLN) for gene delivery. A 2 x 3 full-factorial experimental design was used for the optimization of SLNs formulations. The variables were defined by the components of the formulation: concentration of stearic acid, DOTAP, and Pluronic F68 at two levels (-1, 1) and 3 central points (0). Different SNL formulations were prepared by varying the amount of components and several properties were tested, including their capacity to accommodate DNA and protection against DNase degradation, colloidal stability, in vitro cytotoxicity, and transfection efficiency in prostate cancer cells. Finally, response Surface Methodology was used to select the most effective formulation for gene delivery to prostate cancer cells in vitro. In conclusion, this study revealed that stearic acid and Pluronic F68 were determinant to SLN size and stability, respectively, while small amounts of DOTAP are essential for a successful transfection.

  13. Optimization of LDL targeted nanostructured lipid carriers of 5-FU by a full factorial design

    Directory of Open Access Journals (Sweden)

    Sare Andalib

    2012-01-01

    Full Text Available Background: Nanostructured lipid carriers (NLC are a mixture of solid and liquid lipids or oils as colloidal carrier systems that lead to an imperfect matrix structure with high ability for loading water soluble drugs. The aim of this study was to find the best proportion of liquid and solid lipids of different types for optimization of the production of LDL targeted NLCs used in carrying 5-Fu by the emulsification-solvent evaporation method. Materials and Methods: The influence of the lipid type, cholesterol or cholesteryl stearate for targeting LDL receptors, oil type (oleic acid or octanol, lipid and oil% on particle size, surface charge, drug loading efficiency, and drug released percent from the NLCs were studied by a full factorial design. Results: The NLCs prepared by 54.5% cholesterol and 25% of oleic acid, showed optimum results with particle size of 105.8 nm, relatively high zeta potential of −25 mV, drug loading efficiency of 38% and release efficiency of about 40%. Scanning electron microscopy of nanoparticles confirmed the results of dynamic light scattering method used in measuring the particle size of NLCs. Conclusions: The optimization method by a full factorial statistical design is a useful optimization method for production of nanostructured lipid carriers.

  14. Neutrino Factory

    CERN Document Server

    Bogomilov, M; Tsenov, R; Dracos, M; Bonesini, M; Palladino, V; Tortora, L; Mori, Y; Planche, T; Lagrange, J  B; Kuno, Y; Benedetto, E; Efthymiopoulos, I; Garoby, R; Gilardoini, S; Martini, M; Wildner, E; Prior, G; Blondel, A; Karadzhow, Y; Ellis, M; Kyberd, P; Bayes, R; Laing, A; Soler, F  J  P; Alekou, A; Apollonio, M; Aslaninejad, M; Bontoiu, C; Jenner, L  J; Kurup, A; Long, K; Pasternak, J; Zarrebini, A; Poslimski, J; Blackmore, V; Cobb, J; Tunnell, C; Andreopoulos, C; Bennett, J  R  J; Brooks, S; Caretta, O; Davenne, T; Densham, C; Edgecock, T  R; Fitton, M; Kelliher, D; Loveridge, P; McFarland, A; Machida, S; Prior, C; Rees, G; Rogers, C; Rooney, M; Thomason, J; Wilcox, D; Booth, C; Skoro, G; Back, J  J; Harrison, P; Berg, J  S; Fernow, R; Gallardo, J  C; Gupta, R; Kirk, H; Simos, N; Stratakis, D; Souchlas, N; Witte, H; Bross, A; Geer, S; Johnstone, C; Mokhov, N; Neuffer, D; Popovic, M; Strait, J; Striganov, S; Morfín, J  G; Wands, R; Snopok, P; Bogacz, S  A; Morozov, V; Roblin, Y; Cline, D; Ding, X; Bromberg, C; Hart, T; Abrams, R  J; Ankenbrandt, C  M; Beard, K  B; Cummings, M  A  C; Flanagan, G; Johnson, R  P; Roberts, T  J; Yoshikawa, C  Y; Graves, V  B; McDonald, K  T; Coney, L; Hanson, G

    2014-01-01

    The properties of the neutrino provide a unique window on physics beyond that described by the standard model. The study of subleading effects in neutrino oscillations, and the race to discover CP-invariance violation in the lepton sector, has begun with the recent discovery that $\\theta_{13} > 0$. The measured value of $\\theta_{13}$ is large, emphasizing the need for a facility at which the systematic uncertainties can be reduced to the percent level. The neutrino factory, in which intense neutrino beams are produced from the decay of muons, has been shown to outperform all realistic alternatives and to be capable of making measurements of the requisite precision. Its unique discovery potential arises from the fact that only at the neutrino factory is it practical to produce high-energy electron (anti)neutrino beams of the required intensity. This paper presents the conceptual design of the neutrino factory accelerator facility developed by the European Commission Framework Programme 7 EURO$\

  15. Application of 2k Full Factorial Design in Optimization of Solvent-Free Microwave Extraction of Ginger Essential Oil

    Directory of Open Access Journals (Sweden)

    Mumtaj Shah

    2014-01-01

    Full Text Available The solvent-free microwave extraction of essential oil from ginger was optimized using a 23 full factorial design in terms of oil yield to determine the optimum extraction conditions. Sixteen experiments were carried out with three varying parameters, extraction time, microwave power, and type of sample for two levels of each. A first order regression equation best fits the experimental data. The predicted values calculated by the regression model were in good agreement with the experimental values. The results showed that the extraction time is the most prominent factor followed by microwave power level and sample type for extraction process. An average of 0.25% of ginger oil can be extracted using current setup. The optimum conditions for the ginger oil extraction using SFME were the extraction time 30 minutes, microwave power level 640 watts, and sample type, crushed sample. Solvent-free microwave extraction proves a green and promising technique for essential oil extraction.

  16. Estimating the monetary value of willingness to pay for E-book reader's attributes using partially confounded factorial conjoint choice experiment

    Science.gov (United States)

    Yong, Chin-Khian

    2013-09-01

    A partially confounded factorial conjoint choice experiments design was used to examine the monetary value of the willingness to pay for E-book Reader's attributes. Conjoint analysis is an efficient, cost-effective, and most widely used quantitative method in marketing research to understand consumer preferences and value trade-off. Value can be interpreted by customer or consumer as the received of multiple benefits from a price that was paid. The monetary value of willingness to pay for battery life, internal memory, external memory, screen size, text to Speech, touch screen, and converting handwriting to digital text of E-book reader were estimated in this study. Due to the significant interaction effect of the attributes with the price, the monetary values for the seven attributes were found to be different at different values of odds of purchasing versus not purchasing. The significant interactions effects were one of the main contribution of the partially confounded factorial conjoint choice experiment.

  17. Improvement of the lactic acid fermentation of capers through an experimental factorial design (Capparis spinosa L

    Directory of Open Access Journals (Sweden)

    Errachidi, F.

    2010-12-01

    Full Text Available The study of the caper fermentation process through an experiment factorial plan allows us to determine a function ƒ such that (Y= ƒ(X1, X2, …, Xn existing between magnitude Y which is the decrease of pH (called response, and variables Xi , which are brine, lactic acid, citric acid and lactic ferment (called factors. A complete factorial plan 24 was made in order to determine the factors and the interactions among the factors which have a statistically significant influence on the studied response. Brine, lactic acid and citric acid have a significant effect on the fall of pH; by contrast, lactic ferment does not have a significant effect. On the other hand, the interactions between brine and lactic acid, between brine and lactic ferment , between lactic acid with citric acid and between lactic acid with lactic ferment have significant effects on the fall of pH (p El estudio del proceso de fermentación mediante un diseño factorial nos permitió determinar una función ƒ (Y= ƒ(X1, X2, …, Xn que existe entre la magnitud Y que es la disminución del pH (llamada respuesta, y las variables X, que son la salmuera, ácido láctico, ácido cítrico y los fermentos lácticos (llamados factores. Un completo plan factorial 24 fue hecho con objeto de determinar los factores y las interacciones entre los factores que tienen una influencia estadísticamente significativa en la respuesta estudiada. La salmuera, ácido láctico y ácido cítrico tienen un efecto significativo en la caída del pH; por el contrario, los fermentos lácticos no tienen efecto significativo. Por otra parte, las interacciones entre salmuera y ácido láctico, salmuera y fermentos lácticos, ácido láctico y ácido cítrico, y ácido láctico y fermentos lácticos tuvieron un efecto significativo en la caída del pH (p < 0.0001. La fermentación fue hecha en el laboratorio de investigación de la Sociedad Marocapres-Fez líder Internacional en la transformación de

  18. Design and Factory Test of the E /E- Frascati Linear Accelerator for DAFNE

    Energy Technology Data Exchange (ETDEWEB)

    Anamkath, H.; Lyons, S.; Nett, D.; Treas, P.; Whitham, K.; Zante, T.; /Titan Beta, Dublin; Miller, R.; /Titan Beta, Dublin /SLAC; Boni, R.; Hsieh, H.; Sannibale, F.; Vescovi, M.; Vignola, G.; /Frascati

    2011-11-28

    The electron-positron accelerator for the DAFNE project has been built and is in test at Titan Beta in Dublin, CA. This S-Band RF linac system utilizes four 45 MW sledded klystrons and 16-3 m accelerating structures to achieve the required performance. It delivers a 4 ampere electron beam to the positron converter and accelerates the resulting positrons to 550 MeV. The converter design uses a 4.3T pulsed tapered flux compressor along with a pseudo-adiabatic tapered field to a 5 KG solenoid over the first two positron accelerating sections. Quadrupole focusing is used after 100 MeV. The system performance is given in Table 1. This paper briefly describes the design and development of the various subassemblies in this system and gives the initial factory test data.

  19. CMM Interim Check Design of Experiments (U)

    Energy Technology Data Exchange (ETDEWEB)

    Montano, Joshua Daniel [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-07-29

    Coordinate Measuring Machines (CMM) are widely used in industry, throughout the Nuclear Weapons Complex and at Los Alamos National Laboratory (LANL) to verify part conformance to design definition. Calibration cycles for CMMs at LANL are predominantly one year in length and include a weekly interim check to reduce risk. The CMM interim check makes use of Renishaw’s Machine Checking Gauge which is an off-the-shelf product simulates a large sphere within a CMM’s measurement volume and allows for error estimation. As verification on the interim check process a design of experiments investigation was proposed to test a couple of key factors (location and inspector). The results from the two-factor factorial experiment proved that location influenced results more than the inspector or interaction.

  20. Designing learning experiences.

    Science.gov (United States)

    Collins, Jannette

    2007-01-01

    Creation of significant learning experiences follows basic steps of instructional design related to situational factors, goals and objectives, feedback and evaluation methods, teaching and learning activities, alignment of the preceding elements, and course evaluation. Goals should reflect what students will learn at the end of the course and what will still be with them several years later. Objectives should focus on learner performance, not teacher performance, and on behavior, not subject matter; there should be only one learning outcome per objective. Students learn more and retain their knowledge longer if they acquire it in an active rather than a passive manner. The situational factors, goals and objectives, feedback and evaluation, and teaching and learning activities should all reflect and support each other. The act of course evaluation closes the educational loop of design, implement, evaluate, and modify. (c) RSNA, 2007.

  1. Real Life Experiences with Experience Design

    DEFF Research Database (Denmark)

    Dalsgård, Peter; Halskov, Kim

    2006-01-01

    Experience Design is an emergent field of study, and various approaches to the field abound. In this paper, we take a pragmatic approach to identifying key aspects of an experience design process, by reporting on a project involving the design of experience-oriented applications of interactive...... technologies for knowledge dissemination and marketing, in cooperation with public institutions and businesses. We argue that collaborative formulation of core design intentions and values is a valuable instrument in guiding experience design processes, and present three cases from this project, two of which...... the installations, the core values established to guide the design process and the intended use contexts. We argue that the installations present a broad spectrum of experience design installations that can assist designers in understanding the relations between core values, intentions, use context and interface...

  2. Evaluation of effervescent floating matrix tablet formulations of salbutamol sulfate using full factorial design

    Directory of Open Access Journals (Sweden)

    Rao Monica

    2009-01-01

    Full Text Available The purpose of this research was to formulate and optimize an effervescent floating tablet formulation of salbutamol sulfate using full factorial design. Salbutamol sulfate has an absorption window in the stomach and in the upper part of the small intestine. A 3 2 full factorial design (eight runs was utilized to optimize the formulation wherein the content of hydroxylpropyl methyl cellulose (HPMC (X 1 and sodium bicarbonate (X 2 were taken as independent variables and % drug release after 6 h (Y 1 , t 50% (Y 2 , and buoyancy lag time (BLT (Y 3 were taken as the dependent variables. Salbutamol sufate, HPMC K4M and HPMC K100M CR, stearic acid, talc, dicalcium phosphate, polyvinyl pyrrolidone, and magnesium stearate were used for the current research work. Two viscosity grades of HPMC as matrix materials were used for formulating the tablets, which were prepared by wet granulation. The release data were evaluated by the model-dependent (curve fitting method using the PCP Disso v2.08 software. Optimization studies were carried out using the Design Expert Software (Version 7.0.3. The in vitro drug release mechanism showed anomalous transport. An increase in the concentration and viscosity grade of the polymer resulted in a decrease in the release rate, but it was found that at a higher concentration of HPMC, the viscosity grade did not significantly affect the drug release. Concentration of both HPMC and sodium bicarbonate had a significant effect on the BLT. Optimized effervescent floating tablets of salbutamol sulfate were successfully prepared and a good correlation was observed between predicted and actual values of the dependent variables chosen for the study. Viscosity grade of HPMC did not significantly impact the floatability of the dosage form. Thus, we can conclude that a combination of HPMC, stearic acid, and sodium bicarbonate can be used to increase the gastric residence time of the dosage form up to 12 h.

  3. Sequential Design of Experiments

    Energy Technology Data Exchange (ETDEWEB)

    Anderson-Cook, Christine Michaela [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-06-30

    A sequential design of experiments strategy is being developed and implemented that allows for adaptive learning based on incoming results as the experiment is being run. The plan is to incorporate these strategies for the NCCC and TCM experimental campaigns to be run in the coming months. This strategy for experimentation has the advantages of allowing new data collected during the experiment to inform future experimental runs based on their projected utility for a particular goal. For example, the current effort for the MEA capture system at NCCC plans to focus on maximally improving the quality of prediction of CO2 capture efficiency as measured by the width of the confidence interval for the underlying response surface that is modeled as a function of 1) Flue Gas Flowrate [1000-3000] kg/hr; 2) CO2 weight fraction [0.125-0.175]; 3) Lean solvent loading [0.1-0.3], and; 4) Lean solvent flowrate [3000-12000] kg/hr.

  4. Newly designed double surface bimorph mirror for BL-15A of the photon factory

    Energy Technology Data Exchange (ETDEWEB)

    Igarashi, Noriyuki, E-mail: noriyuki.igarashi@kek.jp; Nitani, Hiroaki; Takeichi, Yasuo; Niwa, Yasuhiro; Abe, Hitoshi; Kimura, Masao; Mori, Takeharu; Nagatani, Yasuko; Kosuge, Takashi; Kamijo, Ai; Koyama, Atsushi; Shimizu, Nobutaka [Photon Factory, Institute of Materials Structure Science, High Energy Accelerator Research Organization 1-1 Oho, Tsukuba, Ibaraki 305-0801 (Japan); Ohta, Hiromasa [Mitsubishi Electric System & Service Co., Ltd. 20F Carrot Tower 4-1-1 Taishido, Setagaya-ku, Tokyo 154-8520 (Japan)

    2016-07-27

    BL-15A is a new x-ray undulator beamline at the Photon Factory. It will be dedicated to two independent research activities, simultaneous XAFS/XRF/XRD experiments, and SAXS/WAXS/GI-SAXS studies. In order to supply a choice of micro-focus, low-divergence and collimated beams, a double surface bimorph mirror was recently developed. To achieve further mirror surface optimization, the pencil beam scanning method was applied for “in-situ” beam inspection and the Inverse Matrix method was used for determination of optimal voltages on the piezoelectric actuators. The corrected beam profiles at every focal spot gave good agreement with the theoretical values and the resultant beam performance is promising for both techniques. Quick and stable switching between highly focused and intense collimated beams was established using this new mirror with the simple motorized stages.

  5. Effect of polymers on crystallo-co-agglomeration of ibuprofen-paracetamol: Factorial design

    Directory of Open Access Journals (Sweden)

    Pawar A

    2007-01-01

    Full Text Available The purpose of this research was to study the effect of concentration of polyethylene glycol and ethyl cellulose on the properties of agglomerates of ibuprofen-paracetamol obtained by crystallo-co-agglomeration technique. The process of crystallo-co-agglomeration involved recrystallization of ibuprofen and its simultaneous agglomeration with paracetamol in presence polymers. The effect of combination of polyethylene glycol and ethylcellulose was studied by 2 2 factorial design. Ibuprofen content of the agglomerate increased with increase in ethyl cellulose while paracetamol content was decreased with increase in polyethylene glycol. Differential scanning calorimetry thermograms of agglomerates showed the unchanged endotherm for ibuprofen melting, whereas paracetamol endotherm was diffused with low enthalpy. The agglomerates were spherical but increase in polyethylene glycol caused its deformation. Agglomerates containing ethylcellulose with polyethylene glycol have higher resistance for fragmentation, modulus of elasticity but impart high tensile strength.

  6. Fish canning wastewater treatment by activated sludge: Application of factorial design optimization

    Directory of Open Access Journals (Sweden)

    Raquel O. Cristóvão

    2015-06-01

    Full Text Available The optimization of hydraulic retention time (HRT and initial organic matter concentration for dissolved organic carbon (DOC abatement of wastewater from a fish canning industry of northern Portugal by activated sludge was investigated using response surface methodology (RSM. The two parameters were chosen since it was found that the treatment efficiency is mainly influenced by them. The experimental data on DOC removal were fitted into a quadratic polynomial model using factorial design and RSM. The optimum process conditions were determined by analyzing the response surface of a three-dimensional plot and by solving the regression model equation. The obtained results showed a HRT of 6.4 h and an initial DOC of 406.2 mg/L as the best treatment conditions. Under these conditions, the maximum predicted DOC removal was 88.0%, confirming the feasibility and the reliability of fish canning wastewater treatment by activated sludge for organic content removal.

  7. Study of formulation variables on properties of glipizide mucoadhesive microspheres by factorial design

    Directory of Open Access Journals (Sweden)

    Hosmani A.H

    2009-12-01

    Full Text Available "nBackground and the Purpose of the study:The purpose of the study was formulate and systemsystematic evaluation in-vitro and in-vivo behaviour of Glipizide mucoadhesive microspheres using 32 full factorial design. "nMethods:Concentration of Polycarbophil and Sodium Alginate were selected as independent variables and the effects were checked on dependent variables like swelling index, mucoadhesion, drug entrapment efficiency and T75. In vivo studies were also performed to determine hypoglycemic activity of the mucoadhesive microspheres. "nResults:The best batch exhibited drug entrapment efficiency of 75%, swelling index of 1.8 and mucoadhesion was 100%. The drug release from the microspheres was also sustained for more than 9 hrs. Conclusion:The concentration of polycarbophil and sodium alginate had highly significant effects on dependent variables. In-vivo testing demonstrated a significant hypoglycemic effect of glipizide.

  8. Novel Starch-PVA Polymer for Microparticle Preparation and Optimization Using Factorial Design Study.

    Science.gov (United States)

    Chattopadhyay, Helen; De, Amit Kumar; Datta, Sriparna

    2015-01-01

    The aim of our present work was to optimize the ratio of a very novel polymer, starch-polyvinyl alcohol (PVA), for controlled delivery of Ornidazole. Polymer-coated drug microparticles were prepared by emulsion method. Microscopic study, scanning electron microscopic study, and atomic force microscopic study revealed that the microparticles were within 10 micrometers of size with smooth spherical shape. The Fourier transform infrared spectroscopy showed absence of drug polymer interaction. A statistical 3(2) full factorial design was used to study the effect of different concentration of starch and PVA on the drug release profile. The three-dimensional plots gave us an idea about the contribution of each factor on the release kinetics. Hence this novel polymer of starch and polyvinyl alcohol can be utilized for control release of the drug from a targeted delivery device.

  9. The Role of Synthetic Biology in the Design of Microbial Cell Factories for Biofuel Production

    Science.gov (United States)

    Colin, Verónica Leticia; Rodríguez, Analía; Cristóbal, Héctor Antonio

    2011-01-01

    Insecurity in the supply of fossil fuels, volatile fuel prices, and major concerns regarding climate change have sparked renewed interest in the production of fuels from renewable resources. Because of this, the use of biodiesel has grown dramatically during the last few years and is expected to increase even further in the future. Biodiesel production through the use of microbial systems has marked a turning point in the field of biofuels since it is emerging as an attractive alternative to conventional technology. Recent progress in synthetic biology has accelerated the ability to analyze, construct, and/or redesign microbial metabolic pathways with unprecedented precision, in order to permit biofuel production that is amenable to industrial applications. The review presented here focuses specifically on the role of synthetic biology in the design of microbial cell factories for efficient production of biodiesel. PMID:22028591

  10. Reappraisal of the historic 1959 cat experiment in Minamata by the Chisso Factory.

    Science.gov (United States)

    Eto, K; Yasutake, A; Nakano, A; Akagi, H; Tokunaga, H; Kojima, T

    2001-08-01

    Autopsy specimens from the historic cat experiment were recently discovered in a storage area at the Kumamoto University School of Medicine. The specimens were from an experiment prompted by physicians in the Chisso Minamata Plant following the announcement made by the Study Group for Minamata disease. On July 14, 1959 the Group announced that the disease was most likely caused by a kind of organic mercury. In order to prove or disprove that industrial waste from the Chisso Factory was the culprit in Minamata disease, a total of ten cats were fed food mixed with industrial waste produced in the acetaldehyde-producing plant. One of the ten cats, No. 717, was subsequently autopsied but the autopsy findings have never been published or recorded in the literature despite their historic significance. The rediscovered specimens were studied pathologically and biochemically, and were analyzed chemically with currently available techniques. Characteristic lesions of methylmercury poisoning were observed in the central nervous system, and the mercury levels in the cerebrum, cerebellum, liver and kidney were found to be markedly elevated in this animal.

  11. Access to resources shapes maternal decision making: evidence from a factorial vignette experiment.

    Directory of Open Access Journals (Sweden)

    Geoff Kushnick

    Full Text Available The central assumption of behavioral ecology is that natural selection has shaped individuals with the capacity to make decisions that balance the fitness costs and benefits of behavior. A number of factors shape the fitness costs and benefits of maternal care, but we lack a clear understanding how they, taken together, play a role in the decision-making process. In animal studies, the use of experimental methods has allowed for the tight control of these factors. Standard experimentation is inappropriate in human behavioral ecology, but vignette experiments may solve the problem. I used a confounded factorial vignette experiment to gather 640 third-party judgments about the maternal care decisions of hypothetical women and their children from 40 female karo Batak respondents in rural Indonesia. This allowed me to test hypotheses derived from parental investment theory about the relative importance of five binary factors in shaping maternal care decisions with regard to two distinct scenarios. As predicted, access to resources--measured as the ability of a woman to provide food for her children--led to increased care. A handful of other factors conformed to prediction, but they were inconsistent across scenarios. The results suggest that mothers may use simple heuristics, rather than a full accounting for costs and benefits, to make decisions about maternal care. Vignettes have become a standard tool for studying decision making, but have made only modest inroads to evolutionarily informed studies of human behavior.

  12. Design of Computer Experiments

    DEFF Research Database (Denmark)

    Dehlendorff, Christian

    The main topic of this thesis is design and analysis of computer and simulation experiments and is dealt with in six papers and a summary report. Simulation and computer models have in recent years received increasingly more attention due to their increasing complexity and usability. Software...... that the sources of variation of the simulation model can be divided in two components corresponding to changes in the environmental factors (the uncontrollable factor settings) and to random variation. Moreover, the structure of the environmental effects can be estimated, which can be used to put the system...... in a more robust operating mode. The interpolation technique called Kriging is the topic of Paper F, which is a widely applied technique for building so called models-for-the-model (metamodels). We propose a method that handles both qualitative and quantitative factors, which is not covered by the standard...

  13. AutoPyFactory: A Scalable Flexible Pilot Factory Implementation

    Science.gov (United States)

    Caballero, J.; Hover, J.; Love, P.; Stewart, G. A.

    2012-12-01

    The ATLAS experiment at the CERN LHC is one of the largest users of grid computing infrastructure, which is a central part of the experiment's computing operations. Considerable efforts have been made to use grid technology in the most efficient and effective way, including the use of a pilot job based workload management framework. In this model the experiment submits ‘pilot’ jobs to sites without payload. When these jobs begin to run they contact a central service to pick-up a real payload to execute. The first generation of pilot factories were usually specific to a single Virtual Organization (VO), and were bound to the particular architecture of that VO's distributed processing. A second generation provides factories which are more flexible, not tied to any particular VO, and provide new and improved features such as monitoring, logging, profiling, etc. In this paper we describe this key part of the ATLAS pilot architecture, a second generation pilot factory, AutoPyFactory. AutoPyFactory has a modular design and is highly configurable. It is able to send different types of pilots to sites and exploit different submission mechanisms and queue characteristics. It is tightly integrated with the PanDA job submission framework, coupling pilot flow to the amount of work the site has to run. It gathers information from many sources in order to correctly configure itself for a site and its decision logic can easily be updated. Integrated into AutoPyFactory is a flexible system for delivering both generic and specific job wrappers which can perform many useful actions before starting to run end-user scientific applications, e.g., validation of the middleware, node profiling and diagnostics, and monitoring. AutoPyFactory also has a robust monitoring system that has been invaluable in establishing a reliable pilot factory service for ATLAS.

  14. Advanced Envelope Research for Factory Built Housing, Phase 3. Design Development and Prototyping

    Energy Technology Data Exchange (ETDEWEB)

    Levy, E. [ARIES Collaborative, New York, NY (United States); Kessler, B. [ARIES Collaborative, New York, NY (United States); Mullens, M. [ARIES Collaborative, New York, NY (United States); Rath, P. [ARIES Collaborative, New York, NY (United States)

    2014-01-01

    The Advanced Envelope Research effort will provide factory homebuilders with high performance, cost-effective alternative envelope designs. In the near term, these technologies will play a central role in meeting stringent energy code requirements. For manufactured homes, the thermal requirements, last updated by statute in 1994, will move up to the more rigorous IECC 2012 levels in 2013, the requirements of which are consistent with site built and modular housing. This places added urgency on identifying envelope technologies that the industry can implement in the short timeframe. The primary goal of this research is to develop wall designs that meet the thermal requirements based on 2012 IECC standards. Given the affordable nature of manufactured homes, impact on first cost is a major consideration in developing the new envelope technologies. This work is part of a four-phase, multi-year effort. Phase 1 identified seven envelope technologies and provided a preliminary assessment of three selected methods for building high performance wall systems. Phase 2 focused on the development of viable product designs, manufacturing strategies, addressing code and structural issues, and cost analysis of the three selected options. An industry advisory committee helped critique and select the most viable solution to move further in the research -- stud walls with continuous exterior insulation. Phase 3, the subject of the current report, focused on the design development of the selected wall concept and explored variations on the use of exterior foam insulation. The scope also included material selection, manufacturing and cost analysis, and prototyping and testing.

  15. Advanced Envelope Research for Factory Built Housing, Phase 3 -- Design Development and Prototyping

    Energy Technology Data Exchange (ETDEWEB)

    Levy, E.; Kessler, B.; Mullens, M.; Rath, P.

    2014-01-01

    The Advanced Envelope Research effort will provide factory homebuilders with high performance, cost-effective alternative envelope designs. In the near term, these technologies will play a central role in meeting stringent energy code requirements. For manufactured homes, the thermal requirements, last updated by statute in 1994, will move up to the more rigorous IECC 2012 levels in 2013, the requirements of which are consistent with site built and modular housing. This places added urgency on identifying envelope technologies that the industry can implement in the short timeframe. The primary goal of this research is to develop wall designs that meet the thermal requirements based on 2012 IECC standards. Given the affordable nature of manufactured homes, impact on first cost is a major consideration in developing the new envelope technologies. This work is part of a four-phase, multi-year effort. Phase 1 identified seven envelope technologies and provided a preliminary assessment of three selected methods for building high performance wall systems. Phase 2 focused on the development of viable product designs, manufacturing strategies, addressing code and structural issues, and cost analysis of the three selected options. An industry advisory committee helped critique and select the most viable solution to move further in the research -- stud walls with continuous exterior insulation. Phase 3, the subject of the current report, focused on the design development of the selected wall concept and explored variations on the use of exterior foam insulation. The scope also included material selection, manufacturing and cost analysis, and prototyping and testing.

  16. Factorial design application in photocatalytic wastewater degradation from TNT industry-red water.

    Science.gov (United States)

    Guz, Ricardo; de Moura, Cristiane; da Cunha, Mário Antônio Alves; Rodrigues, Marcio Barreto

    2017-03-01

    In trinitrotoluene (TNT) purification process, realized in industries, there are two washes carried out at the end of the procedure. The first is performed with vaporized water, from which the first effluent, called yellow water, is originated. Then, a second wash is performed using sodium sulfite, generating the red water effluent. The objective of this work was to get the best conditions for photocatalytic degradation of the second effluent, red water, in order to reduce toxicity and adjust legal parameters according to regulatory agencies for dumping these effluents into waterways. It has used a statistical evaluation for factor interaction (pH, concentration) that affects heterogeneous photocatalysis with titanium dioxide (TiO2). Thus, the treatment applied in the factorial experimental design consisted of using a volume equal to 500 mL of the effluent to 0.1 % by batch treatment, which has changed TiO2 pH and concentration, according to the design, with 20 min time for evaluation, where it was used as response to the reduction of UV-Vis absorption. According to the design responses, it has obtained optimum values for the parameters evaluated: pH = 6.5 and concentration of 100 mg/L of TiO2 were shown to be efficient when applied to red water effluent, obtaining approximately 91 % of discoloration.

  17. User Experience Design in Webpage Design

    Institute of Scientific and Technical Information of China (English)

    许钰伟

    2014-01-01

    User experience design is becoming more and more important. It originates from network as well as screen products interactive with users, whose scope is very wide. Although research orientations are different, their objective is the same, that is, to make users enjoy the simplest usage mode and reduce thinking in use; Although there is uncertainty, for some specific user group, the similarity of user experience can be recognized by excellent design;Although user experience is at the initial stage, with higher demand of comfort degree in surfing the internet, user experience design will be the core of future website design.

  18. Design Experiments in Educational Research.

    Science.gov (United States)

    Cobb, Paul; Confrey, Jere; diSessa, Andrea; Lehrer, Richard; Schauble, Leona

    2003-01-01

    Indicates the range of purposes and variety of settings in which design experiments have been conducted, delineating five crosscutting features that collectively differentiate design experiments from other methodologies. Clarifies what is involved in preparing for and carrying out a design experiment and in conducting a retrospective analysis of…

  19. Design and optimization of mucoadhesive nasal in situ gel containing sodium cromoglycate using factorial design

    Directory of Open Access Journals (Sweden)

    Riten A Shah

    2011-01-01

    Full Text Available Nasal in situ gel of sodium cromoglycate was prepared for sustained release and improvement of drug bioavailability. Carbopol 940 was used as a key ingredient which gives pH-induced sol to gel conversion of the formulations. Different formulations were prepared by varying the concentrations of carbopol 940 and different grades of Hydroxyl Propyl Methyl Cellulose (HPMC K100, HPMC K4M and HPMC K15M. These formulations were evaluated for parameters like pH, drug content, viscosity, gel strength, in vitro drug release and drug excipient compatibility. In this study, the release profile depends on the concentration of carbopol 940 and grade HPMC. A 3 2 factorial was applied to check the effect of varying the concentration of carbopol 940 (X 1 and different grades of HPMC (X 2 on the dependent variable i.e. viscosity, mucoadhesive strength, cumulative percentage drug released in 1 h (Q 1 , 4 h (Q 4 and 8 h (Q 8 as dependent variables . In vitro release data was fitted to various models to ascertain the kinetic of drug release. Regression analysis and analysis of variance were performed for dependent variables. The results of the F-statistics were used to select the most appropriate model. Formulation F6 was considered optimum which contained carbopol 940 (0.75% and HPMC K4M (0.50% and was more similar to the theoretical predicted dissolution profile (f2 =70.99. The studies indicate that the formulation was effective in providing in vitro release, in vitro permeation of drug and the mucoadhesion which increases the residence time of drug.

  20. Development and physical evaluation of Maytenus ilicifolia effervescent granules using factorial design

    Directory of Open Access Journals (Sweden)

    Marcilio Sérgio Soares da Cunha-Filho

    2014-04-01

    Full Text Available The medicinal plant Maytenus ilicifolia is a commonly used phytomedicine for the treatment of gastritis. The high dose required and low density of these extracts make necessary a daily intake of several capsules, hindering adherence to the medication. The purpose of this work was to develop a suitable dosage form for the administration of Maytenus ilicifolia using effervescent granules. A 23 factorial design was used to study the physical characteristics of the granules (particle size distribution, repose angle, Carr index, scanning electron microscopy and disintegration time. Moisture stability was also determined. According to the experimental design, granule size is the most important factor in determining the flow characteristics of effervescent granules. In turn, the disintegration time is controlled by the content of sodium bicarbonate present in the effervescent mixture as well as the granule size. The stability of formulations when exposed to moisture is strongly influenced by the percentage of effervescent mixture present in the vegetal granules. Precautions in handling and storage should be taken to ensure the stability of these preparations. The effervescent granules produced from Maytenus ilicifolia met the pharmacopoeial quality parameters, with appropriate mechanical and physical characteristics and proved to be a promising vehicle for plant extracts.

  1. Floating granules of ranitidine hydrochloride-gelucire 43/01: formulation optimization using factorial design.

    Science.gov (United States)

    Patel, Dasharath M; Patel, Natavarlal M; Patel, Viral F; Bhatt, Darshini A

    2007-04-13

    The purpose of this research was to develop and optimize a controlled-release multiunit floating system of a highly water soluble drug, ranitidine HCl, using Compritol, Gelucire 50/13, and Gelucire 43/01 as lipid carriers. Ranitidine HCl-lipid granules were prepared by the melt granulation technique and evaluated for in vitro floating and drug release. Ethyl cellulose, methylcellulose, and hydroxypropyl methylcellulose were evaluated as release rate modifiers. A 3(2) full factorial design was used for optimization by taking the amounts of Gelucire 43/01 (X (1)) and ethyl cellulose (X (2)) as independent variables, and the percentage drug released in 1(Q(1)), 5(Q(5)), and 10 (Q(10)) hours as dependent variables. The results revealed that the moderate amount of Gelucire 43/01 and ethyl cellulose provides desired release of ranitidine hydrochloride from a floating system. Batch F4 was considered optimum since it contained less Gelucire and was more similar to the theoretically predicted dissolution profile (f(2) = 62.43). The temperature sensitivity studies for the prepared formulations at 40 degrees C/75% relative humidity for 3 months showed no significant change in in vitro drug release pattern. These studies indicate that the hydrophobic lipid Gelucire 43/01 can be considered an effective carrier for design of a multiunit floating drug delivery system for highly water soluble drugs such as ranitidine HCl.

  2. Design, Engineering, and Construction of Photosynthetic Microbial Cell Factories for Renewable Solar Fuel Production

    Energy Technology Data Exchange (ETDEWEB)

    Lindblad, Peter; Lindberg, Pia; Stensjoe, Karin (Photochemistry and Molecular Science, Dept. of Chemistry-Aangstroem Laboratory, Uppsala Univ., Uppsala (Sweden)), E-mail: Peter.Lindblad@kemi.uu.se; Oliveira, Paulo (Instituto de Biologia Molecular e Celular, Porto (Portugal)); Heidorn, Thorsten (Bioforsk-Norwegian Inst. for Agricultural and Environmental Research, Aas Oslo, (Norway))

    2012-03-15

    There is an urgent need to develop sustainable solutions to convert solar energy into energy carriers used in the society. In addition to solar cells generating electricity, there are several options to generate solar fuels. This paper outlines and discusses the design and engineering of photosynthetic microbial systems for the generation of renewable solar fuels, with a focus on cyanobacteria. Cyanobacteria are prokaryotic microorganisms with the same type of photosynthesis as higher plants. Native and engineered cyanobacteria have been used by us and others as model systems to examine, demonstrate, and develop photobiological H{sub 2} production. More recently, the production of carbon-containing solar fuels like ethanol, butanol, and isoprene have been demonstrated. We are using a synthetic biology approach to develop efficient photosynthetic microbial cell factories for direct generation of biofuels from solar energy. Present progress and advances in the design, engineering, and construction of such cyanobacterial cells for the generation of a portfolio of solar fuels, e.g., hydrogen, alcohols, and isoprene, are presented and discussed. Possibilities and challenges when introducing and using synthetic biology are highlighted

  3. Optimizing the lanthanum adsorption process onto chemically modified biomaterials using factorial and response surface design.

    Science.gov (United States)

    Gabor, Andreea; Davidescu, Corneliu Mircea; Negrea, Adina; Ciopec, Mihaela; Grozav, Ion; Negrea, Petru; Duteanu, Narcis

    2017-01-29

    The rare metals' potential to pollute air, water, soil, and especially groundwater has received lot of attention recently. One of the most common rare earth group elements, lanthanum, is used in many industrial branches, and due to its toxicity, it needs to be eliminated from all residual aqueous solutions. The goal of this study was to evaluate the control of the adsorption process for lanthanum removal from aqueous solutions, using cellulose, a known biomaterial with high adsorbent properties, cheap, and environment friendly. The cellulose was chemically modified by functionalization with sodium β-glycerophosphate. The experimental results obtained after factorial design indicate optimum adsorption parameters as pH 6, contact time 60 min, and temperature 298 K, when the equilibrium concentration of lanthanum was 250 mg L(-1), and the experimental adsorption capacity obtained was 31.58 mg g(-1). Further refinement of the optimization of the adsorption process by response surface design indicates that at pH 6 and the initial concentration of 256 mg L(-1), the adsorption capacity has maximum values between 30.87 and 36.73 mg g(-1).

  4. Design, engineering, and construction of photosynthetic microbial cell factories for renewable solar fuel production.

    Science.gov (United States)

    Lindblad, Peter; Lindberg, Pia; Oliveira, Paulo; Stensjö, Karin; Heidorn, Thorsten

    2012-01-01

    There is an urgent need to develop sustainable solutions to convert solar energy into energy carriers used in the society. In addition to solar cells generating electricity, there are several options to generate solar fuels. This paper outlines and discusses the design and engineering of photosynthetic microbial systems for the generation of renewable solar fuels, with a focus on cyanobacteria. Cyanobacteria are prokaryotic microorganisms with the same type of photosynthesis as higher plants. Native and engineered cyanobacteria have been used by us and others as model systems to examine, demonstrate, and develop photobiological H(2) production. More recently, the production of carbon-containing solar fuels like ethanol, butanol, and isoprene have been demonstrated. We are using a synthetic biology approach to develop efficient photosynthetic microbial cell factories for direct generation of biofuels from solar energy. Present progress and advances in the design, engineering, and construction of such cyanobacterial cells for the generation of a portfolio of solar fuels, e.g., hydrogen, alcohols, and isoprene, are presented and discussed. Possibilities and challenges when introducing and using synthetic biology are highlighted.

  5. Optimization of Extracellular Lipase Production by Penicillium chrysogenum Using Factorial Design

    Directory of Open Access Journals (Sweden)

    Shafei, M. S.

    2011-01-01

    Full Text Available The effect of oxygen on lipase production by Penicillium chrysogenum was studied under two operating modes, controlled aeration rate tested and controlled agitation at dissolved oxygen concentration (DO 1.00 vvm. Lipase production and cell dry weight were tested in a stirred batch fermenter 5 L. Improvement in oxygen transfer rate (OTR either by aeration or agitation resulted in an increase in lipase production. Growth curves and lipase activities of P.chrysogenum were examined at agitation rates (200,400,600 rpm, aeration rates (2,4 vvm at different fermentation periods (24,48,72,96,120 h. Response Surface Methodology (RSM using Design Expert software was used to study the effect of aeration, agitation, and fermentation time on lipase activity and cell dry weight. These factors were analyzed using 21. 32 level factorial design. An optimal set of conditions that maximize lipase production: (2 vvm aeration; 600 rpm agitation after 72 h was obtained. The maximum lipase activity obtained was 240 U/mL. Beside lipase activity, this paper also studies the optimal combination of the controllable factors (aeration; agitation and fermentation time that will maximize the cell dry weight.

  6. Fluoride removal from diluted solutions by Donnan dialysis using full factorial design

    Energy Technology Data Exchange (ETDEWEB)

    Boubakri, Ali; Helali, Nawel; Tlili, Mohamed; Amor, Mohamed Ben [Center of Researches and Water Technologies, Soliman (Turkey)

    2014-03-15

    Excessive fluoride concentration in potable water can lead to fluorosis of teeth and bones. In the present study, Donnan dialysis (DD) is applied for the removal of fluoride ions from diluted sodium fluoride solutions. A four factor two level (2{sup 4}) full factorial design was used to investigate the influence of different physico-chemical parameters on fluoride removal efficiency (Y{sub F}) and fluoride flux (J{sub F}) through anion exchange membrane. The statistical design determines factors which have the important effects on Donnan dialysis performance and studies all interactions among the considered parameters. The four significant factors were initial fluoride concentration, feed flow rate, temperature and agitation speed. The experimental results and statistical analysis show that the temperature and agitation speed have positive effects on fluoride removal efficiency and the initial fluoride concentration has a negative effect. In the case of fluoride flux, feed flow rate and initial concentration are the main effect and all factors have a positive effect. The interaction between studied parameters was not negligible on two responses. A maximum fluoride removal of 75.52% was obtained under optimum conditions and the highest value of fluoride flux obtained was 2.4 mg/cm{sup 2}·h. Empirical regression models were also obtained and used to predict the flux and the fluoride removal profiles with satisfactory results.

  7. Enhanced diesel fuel fraction from waste high-density polyethylene and heavy gas oil pyrolysis using factorial design methodology.

    Science.gov (United States)

    Joppert, Ney; da Silva, Alexsandro Araujo; da Costa Marques, Mônica Regina

    2015-02-01

    Factorial Design Methodology (FDM) was developed to enhance diesel fuel fraction (C9-C23) from waste high-density polyethylene (HDPE) and Heavy Gas Oil (HGO) through co-pyrolysis. FDM was used for optimization of the following reaction parameters: temperature, catalyst and HDPE amounts. The HGO amount was constant (2.00 g) in all experiments. The model optimum conditions were determined to be temperature of 550 °C, HDPE = 0.20 g and no FCC catalyst. Under such conditions, 94% of pyrolytic oil was recovered, of which diesel fuel fraction was 93% (87% diesel fuel fraction yield), no residue was produced and 6% of noncondensable gaseous/volatile fraction was obtained. Seeking to reduce the cost due to high process temperatures, the impact of using higher catalyst content (25%) with a lower temperature (500 °C) was investigated. Under these conditions, 88% of pyrolytic oil was recovered (diesel fuel fraction yield was also 87%) as well as 12% of the noncondensable gaseous/volatile fraction. No waste was produced in these conditions, being an environmentally friendly approach for recycling the waste plastic. This paper demonstrated the usefulness of using FDM to predict and to optimize diesel fuel fraction yield with a great reduction in the number of experiments.

  8. Ground-up circular Higgs Factory ring design and cell length optimization

    Science.gov (United States)

    Talman, Richard

    2017-02-01

    A “ground-up” Higgs Factory design methodology is described. For concreteness, numerical parameter choices are drawn primarily from CEPC, the Circular Electron Positron Collider. The goals are to find: (i) optimal parameters, (ii) improved understanding , (iii) a tentative lattice design. As illustration of the method, six chromaticity-corrected lattices, with cell lengths ranging from 45 m to 280 m, all with identical βy = 2 mm or βy = 10 mm intersection region optics, are designed and their properties compared. For simplicity only a single “toy ring,” circumference (76 km), with one interaction point, and a single beam energy (120 GeV) is considered. For the cell-length optimization a figure of merit FOM (essentially integrated luminosity) is maximized consistent with a dimensionless “fine tuning penalty function” or figure of demerit FOD not being allowed to exceed a conservatively chosen upper limit. The tentative recommendation from this investigation is that the optimal CEPC route is (except for obvious changes) to simply copy LEP: 80 m cell length and two-in-one single-ring operation. The main luminosity-increasing improvements are increased radius and power, top-off-full-energy-injection, noninterleaved sextupoles, more than 100 beam bunch operation, and improved intersection region design. Local chromaticity compensation (with its inevitable intense hard X-rays incident on the detectors) is found to be unnecessary. With these changes luminosity in excess of 1034cm‑2s‑1 is projected to be achievable.

  9. Removing lead from metallic mixture of waste printed circuit boards by vacuum distillation: factorial design and removal mechanism.

    Science.gov (United States)

    Li, Xingang; Gao, Yujie; Ding, Hui

    2013-10-01

    The lead removal from the metallic mixture of waste printed circuit boards by vacuum distillation was optimized using experimental design, and a mathematical model was established to elucidate the removal mechanism. The variables studied in lead evaporation consisted of the chamber pressure, heating temperature, heating time, particle size and initial mass. The low-level chamber pressure was fixed at 0.1 Pa as the operation pressure. The application of two-level factorial design generated a first-order polynomial that agreed well with the data for evaporation efficiency of lead. The heating temperature and heating time exhibited significant effects on the efficiency, which was validated by means of the copper-lead mixture experiments. The optimized operating conditions within the region studied were the chamber pressure of 0.1 Pa, heating temperature of 1023 K and heating time of 120 min. After the conditions were employed to remove lead from the metallic mixture of waste printed circuit boards, the efficiency was 99.97%. The mechanism of the effects was elucidated by mathematical modeling that deals with evaporation, mass transfer and condensation, and can be applied to a wider range of metal removal by vacuum distillation. Copyright © 2013 Elsevier Ltd. All rights reserved.

  10. Scattering correction algorithm in the PET sinogram using the factorial design of experimental method: A phantom study.

    Science.gov (United States)

    Chen, Huei-Yung; Lu, Nan-Han; Huang, Yung-Hui; Chen, Tai-Been

    2015-01-01

    Positron emission tomography (PET) had been utilized to image gene therapy, estimate tumor growth, detect neural function of the brain, and diagnose disease. However, sinogram noise always results inaccurate PET images. The factorial design of experiment (DOE), a statistical method, was applied to investigate, correct and estimate the fraction of scattering of 2D sinogram in PET. The DOE was included as factors of angle views and scatter media with two levels designed. The PET sinogram after scattering correction was then reconstructed by filtered back projection (FBP). Both Ge-68 uniform phantom and Jaszczak anthropomorphic torso phantom were applied to exam the performance of presented scattering correction algorithm. The signal-to-noise ratio (SNR), standard deviation (STD) of background, and full width at half maximum (FWHM), and uniformity test were applied to validate the performance of presented method. The proposed method provides a narrower FWHM, smaller STD of the background, higher SNR and better uniformity than those of original protocols. This method should be tested for accuracy and feasibility with three-dimensional phantoms or real animal studies and consideration effects of cross-talk between slices in future work.

  11. Statistical optimization of dithranol-loaded solid lipid nanoparticles using factorial design

    Directory of Open Access Journals (Sweden)

    Makarand Suresh Gambhire

    2011-09-01

    Full Text Available This study describes a 3² full factorial experimental design to optimize the formulation of dithranol (DTH loaded solid lipid nanoparticles (SLN by the pre-emulsion ultrasonication method. The variables drug: lipid ratio and sonication time were studied at three levels and arranged in a 3² factorial design to study the influence on the response variables particle size and % entrapment efficiency (%EE. From the statistical analysis of data polynomial equations were generated. The particle size and %EE for the 9 batches (R1 to R9 showed a wide variation of 219-348 nm and 51.33- 71.80 %, respectively. The physical characteristics of DTH-loaded SLN were evaluated using a particle size analyzer, differential scanning calorimetry and X-ray diffraction. The results of the optimized formulation showed an average particle size of 219 nm and entrapment efficiency of 69.88 %. Ex-vivo drug penetration using rat skin showed about a 2-fold increase in localization of DTH in skin as compared to the marketed preparation of DTH.Este estudo descreve o planejamento factorial 3² para otimizar a formulação de nanopartículas lipídicas sólidas (SLN carregadas com ditranol (DTH pelo método da ultrassonificação pré-emulsão. As variáveis como proporção de fármaco:lipídio e o tempo de sonicação foram estudados em três níveis e arranjados em planejamento fatorial 3² para estudar a influência nas variáveis de resposta tamanho de partícula e eficiência percentual de retenção do fármaco (%EE. Pela análise estatística, geraram-se equações polinomiais. O tamanho da partícula e a %EE para os 9 lotes (R1 a R9 mostraram ampla variação, respectivamente, 219-348 nm e 51,33-71,80%. As características físicas das SLN carregadas com DTN foram avaliadas utilizando-se analisador de tamanho de partícula, calorimetria de varredura diferencial e difração de raios X. Os resultados da formulação otimizada mostraram tamanho médio de partícula de

  12. Touchstone: Exploratory Design of Experiments

    OpenAIRE

    2007-01-01

    International audience; Touchstone is an open-source experiment design platform designed to help establish a solid research foundation for HCI in the area of novel interaction techniques. Touchstone includes a design platform for exploring alternative designs of controlled laboratory experiments, a run platform for running subjects and a limited analysis platform for advice and access to on-line statistics packages. Designed for HCI researchers and their students, Touchstone facilitates the p...

  13. Fractional factorial plans

    CERN Document Server

    Dey, Aloke

    2009-01-01

    A one-stop reference to fractional factorials and related orthogonal arrays.Presenting one of the most dynamic areas of statistical research, this book offers a systematic, rigorous, and up-to-date treatment of fractional factorial designs and related combinatorial mathematics. Leading statisticians Aloke Dey and Rahul Mukerjee consolidate vast amounts of material from the professional literature--expertly weaving fractional replication, orthogonal arrays, and optimality aspects. They develop the basic theory of fractional factorials using the calculus of factorial arrangements, thereby providing a unified approach to the study of fractional factorial plans. An indispensable guide for statisticians in research and industry as well as for graduate students, Fractional Factorial Plans features: * Construction procedures of symmetric and asymmetric orthogonal arrays. * Many up-to-date research results on nonexistence. * A chapter on optimal fractional factorials not based on orthogonal arrays. * Trend-free plans...

  14. HPLC analysis of oxindole alkaloids in Uncaria tomentosa: sample preparation and analysis optimisation by factorial design.

    Science.gov (United States)

    Bertol, Gustavo; Franco, Luzia; Oliveira, Brás Heleno de

    2012-01-01

    Uncaria tomentosa ("cat's claw") is widely used for the treatment of some infectious and inflammatory diseases. Oxindole alkaloids are regarded as the most important components responsible for the biological activities attributed to the plant. Their analysis require efficient sample preparation and suitable reference standards but few are commercially available. To develop and validate a HPLC analytical method for oxindole alkaloids in Uncaria tomentosa with emphasis on sample preparation. Factorial experimental designs were used for the optimisation of both sample preparation and chromatographic separation. The optimised sample preparation involved extraction with aqueous ethanol, and the granulometry of the powdered plant material significantly influenced extraction yields. Mitraphylline was used as a calibration reference for the determination of total alkaloids. The method was fully validated and showed good selectivity, linearity (r²  ≥ 0.9996), accuracy (≥ 96%) and precision (RSD < 2.4%). Detection and quantification limits for mitraphylline were 0.8 and 2.4 ppm, respectively. The optimised chromatographic method, using organic buffer in the mobile phase, provided baseline separation of tetracyclic and pentacyclic alkaloids in the samples. Calibration using mitraphylline provided more accurate estimates of total alkaloid content when compared to other available reference alkaloids. Copyright © 2011 John Wiley & Sons, Ltd.

  15. Biosorption of Ni(II) by Fig Male: Optimization and Modeling Using a Full Factorial Design.

    Science.gov (United States)

    Madjene, F; Chergui, A; Trari, M

    2016-06-01

    The fig male (FM) is successfully used as biosorbent for Ni(2+) removal. The maximum removal efficiency (96.6%) is obtained at pH ~ 5 for a concentration of 1.70 mmol L(-1) and catalyst dose of 5 g L(-1) in less than 10 minutes. The Ni(2+) uptake follows a pseudo-second-order kinetic, the rate constants increase with increasing temperature, and an activation energy of 55.48 kJ mol(-1) is found. The thermodynamic parameters indicate a spontaneous endothermic bisorption. The isotherm data are fitted by the Langmuir and Dubinin-Radushkevich models. The former indicates a maximum Ni(2+) uptake of 0.459 mmol g(-1), which is higher than that of most biosorbents investigated to date. The FTIR spectra reveal the biosorption mechanism between Ni(2+) and FM functional groups. An empirical modeling is performed by using a 2(3) full factorial design, and a regression equation for Ni(2+) biosorption is determined. The biosorbent mass and pH are the most significant parameters affecting the Ni(2+) biosorption.

  16. Pediatric diabetic ketoacidosis, fluid therapy, and cerebral injury: the design of a factorial randomized controlled trial.

    Science.gov (United States)

    Glaser, Nicole S; Ghetti, Simona; Casper, T Charles; Dean, J Michael; Kuppermann, Nathan

    2013-09-01

    Treatment protocols for pediatric diabetic ketoacidosis (DKA) vary considerably among centers in the USA and worldwide. The optimal protocol for intravenous (IV) fluid administration is an area of particular controversy, mainly in regard to possible associations between rates of IV fluid infusion and the development of cerebral edema (CE), the most common and the most feared complication of DKA in children. Theoretical concerns about associations between osmotic fluid shifts and CE have prompted recommendations for conservative fluid infusion during DKA. However, recent data suggest that cerebral hypoperfusion may play a role in cerebral injury associated with DKA. Currently, there are no existing data from prospective clinical trials to determine the optimal fluid treatment protocol for pediatric DKA. The Pediatric Emergency Care Applied Research Network FLUID (FLuid therapies Under Investigation in DKA) study is the first prospective randomized trial to evaluate fluid regimens for pediatric DKA. This 13-center nationwide factorial design study will evaluate the effects of rehydration rate and fluid sodium content on neurological status during DKA treatment, the frequency of clinically overt CE and long-term neurocognitive outcomes following DKA.

  17. Factorial experimental design for recovering heavy metals from sludge with ion-exchange resin.

    Science.gov (United States)

    Lee, I Hsien; Kuan, Yu-Chung; Chern, Jia-Ming

    2006-12-01

    Wastewaters containing heavy metals are usually treated by chemical precipitation method in Taiwan. This method can remove heavy metals form wastewaters efficiently, but the resultant heavy metal sludge is classified as hazardous solid waste and becomes another environmental problem. If we can remove heavy metals from sludge, it becomes non-hazardous waste and the treatment cost can be greatly reduced. This study aims at using ion-exchange resin to remove heavy metals such as copper, zinc, cadmium, and chromium from sludge generated by a PCB manufacturing plant. Factorial experimental design methodology was used to study the heavy metal removal efficiency. The total metal concentrations in the sludge, resin, and solution phases were measured respectively after 30 min reaction with varying leaching agents (citric acid and nitric acid); ion-exchange resins (Amberlite IRC-718 and IR-120), and temperatures (50 and 70 degrees C). The experimental results and statistical analysis show that a stronger leaching acid and a higher temperature both favor lower heavy metal residues in the sludge. Two-factors and even three-factor interaction effects on the heavy metal sorption in the resin phase are not negligible. The ion-exchange resin plays an important role in the sludge extraction or metal recovery. Empirical regression models were also obtained and used to predict the heavy metal profiles with satisfactory results.

  18. Design of a Low Cost Smart Dryer Temperature Measurement System for Tea Factories

    Directory of Open Access Journals (Sweden)

    Utpal SARMA

    2009-09-01

    Full Text Available This paper presents the design of a low cost smart dryer temperature measurement system for Tea Factories using K-type Thermocouple implementing linearization polynomial. The thermo emf is amplified by an instrumentation amplifier having high CMRR (106 dB and high input impedance (1012 Ohm. The analog signal is converted to digital form with the help of an SPI compatible 12-bit ADC. Data acquisition and transmission is done with an 8- bit microcontroller. As the dependence of thermo emf on temperature is not linear hence it is fitted with a polynomial. NIST data for K-type TC is taken as a standard for this fitting. The error with linear fit and polynomial fit is also presented. The digital data is corrected according to the polynomial and sent to a PC located at a remote control room for monitoring and data logging via RS232C communication. The performance of the entire system is discussed in the paper.

  19. Development and optimization of novel controlled-release pioglitazone provesicular powders using 3² factorial design.

    Science.gov (United States)

    Shukr, Marwa H; Eltablawy, Nadia A

    2015-02-01

    This work aimed at studying a novel controlled drug delivery proniosomal formulation of pioglitazone for treatment of diabetes type-2. The effects of independent variables like type of surfactant and ratio of surfactants/cholesterol were studied using 3(2) factorial design. The provesicular powders were characterized regarding their encapsulation efficiency, vesicle size, morphology, and in vitro drug release. The revealed optimal provesicular powder was exposed to stability testing and in vivo performance evaluation. Results showed that F6 was selected as the optimal formulation, and its in vivo hypoglycemic effect on normal healthy and STZ-induced diabetic albino rats was investigated. F6 proniosomal formulation exhibited a significantly higher % decrease (56.18 % for STZ-induced diabetic albino rats) of blood glucose level (BGL) than Actos® (32. % for STZ-induced diabetic albino rats). Higher % decrease of BGL with longer t max and lower AUC0-24 confirms the development of a successful proniosomal pioglitazone formulation.

  20. Benzocaine loaded biodegradable poly-(D,L-lactide-co-glycolide) nanocapsules: factorial design and characterization

    Energy Technology Data Exchange (ETDEWEB)

    Morales Moraes, Carolina; Prado de Matos, Angelica; Paula, Eneida de [Department of Biochemistry, Institute of Biology, State University of Campinas, Campinas, SP (Brazil); Rosa, Andre Henrique [Department of Environmental Engineering, State University of Sao Paulo, Sorocaba, Sao Paulo (Brazil); Fernandes Fraceto, Leonardo, E-mail: leonardo@sorocaba.unesp.b [Department of Biochemistry, Institute of Biology, State University of Campinas, Campinas, SP (Brazil); Department of Environmental Engineering, State University of Sao Paulo, Sorocaba, Sao Paulo (Brazil)

    2009-12-15

    Local anesthetics are able to induce pain relief since they bind to the sodium channel of excitable membranes, blocking the influx of sodium ions and the propagation of the nervous impulse. Benzocaine (BZC) is a local anesthetic that presents limited application in topical formulations due to its low water-solubility. This study aimed to develop polymeric nanocapsules as a drug delivery system for the local anesthetic benzocaine (BZC). To do so, BZC loaded poly(D,L-lactide-co-glycolide) (PLGA) nanocapsules were prepared using the nanoprecipitation method and were characterized. The factorial experimental design was used to study the influence of four different independent variables on response to nanocapsules drug loading. The physical characteristics of PLGA nanocapsules were evaluated by analyzing the particle size, the polydispersion index and the zeta potential, using a particle size analyzer. The results of the optimized formulation showed a size distribution with a polydispersity index of 0.12, an average diameter of 123 nm, zeta potential of -33.6 mV and a drug loading of more than 69%. The release profiles showed a significant difference in the release behavior for the pure drug in solution when compared with that containing benzocaine loaded PLGA nanocapsules. Thus, the prepared nanocapsules described here may be of clinical importance in both the processes of stabilization and delivery of benzocaine for pain treatment.

  1. Evaluating treatment of obstructive sleep apnea comorbid with insomnia disorder using an incomplete factorial design

    Science.gov (United States)

    Crawford, Megan R.; Turner, Arlener D.; Wyatt, James K.; Fogg, Louis F.; Ong, Jason C.

    2016-01-01

    Chronic insomnia disorder is a prevalent condition and a significant proportion of these individuals also have obstructive sleep apnea (OSA). These two sleep disorders have distinct pathophysiology and are managed with different treatment approaches. High comorbidity rates have been a catalyst for emerging studies examining multidisciplinary treatment for OSA comorbid with insomnia disorder. In this article, we describe a randomized clinical trial of Cognitive Behavioral Treatment for insomnia (CBT-I) and Positive Airway Pressure (PAP) for OSA. Participants are randomized to receive one of three treatment combinations. Individuals randomized to treatment Arm A receive sequential treatment beginning with CBT-I followed by PAP, in treatment Arm B CBT-I and PAP are administered concurrently. These treatment arms are compared to a control condition, treatment Arm C, where individuals receive PAP alone. Adopting an incomplete factorial study design will allow us to evaluate the efficacy of multidisciplinary treatment (Arms A & B) versus standard treatment alone (Arm C). In addition, the random allocation of individuals to the two different combined treatment sequences (Arm A and Arm B) will allow us to understand the benefits of the sequential administration of CBT-I and PAP relative to concurrent treatment of PAP and CBT-I. These findings will provide evidence of the clinical benefits of treating insomnia disorder in the context of OSA. PMID:26733360

  2. Evaluating the treatment of obstructive sleep apnea comorbid with insomnia disorder using an incomplete factorial design.

    Science.gov (United States)

    Crawford, Megan R; Turner, Arlener D; Wyatt, James K; Fogg, Louis F; Ong, Jason C

    2016-03-01

    Chronic insomnia disorder is a prevalent condition and a significant proportion of these individuals also have obstructive sleep apnea (OSA). These two sleep disorders have distinct pathophysiology and are managed with different treatment approaches. High comorbidity rates have been a catalyst for emerging studies examining multidisciplinary treatment for OSA comorbid with insomnia disorder. In this article, we describe a randomized clinical trial of cognitive behavioral treatment for insomnia (CBT-I) and positive airway pressure (PAP) for OSA. Participants are randomized to receive one of three treatment combinations. Individuals randomized to treatment Arm A receive sequential treatment beginning with CBT-I followed by PAP, in treatment Arm B CBT-I and PAP are administered concurrently. These treatment arms are compared to a control condition, treatment Arm C, where individuals receive PAP alone. Adopting an incomplete factorial study design will allow us to evaluate the efficacy of multidisciplinary treatment (Arms A & B) versus standard treatment alone (Arm C). In addition, the random allocation of individuals to the two different combined treatment sequences (Arm A and Arm B) will allow us to understand the benefits of the sequential administration of CBT-I and PAP relative to concurrent treatment of PAP and CBT-I. These findings will provide evidence of the clinical benefits of treating insomnia disorder in the context of OSA. Copyright © 2016 Elsevier Inc. All rights reserved.

  3. FORMULATION AND EVALUATION OF TIZANIDINE HYDROCHLORIDE MICROSPHERES BY USING 32 FULL FACTORIAL DESIGNS

    Directory of Open Access Journals (Sweden)

    Adimoolam Senthil

    2011-09-01

    Full Text Available Tizanidine hydrochloride is a centrally acting α-2 adrenergic agonist muscle relaxant. In the present study an attempt has been made to formulate and evaluate tizanidine hydrochloride microspheres by using hydroxypropylmethylcellulose K4M and carboxymethyl cellulose as polymers. Tizanidine hydrochloride microspheres were prepared by simple emulsification phase separation technique using glutaraldehyde as a cross-linking agent. Twenty preliminary trial batches, B1-B20 batches of microspheres were prepared by using different volume (2 to 10 ml of glutaraldehyde as cross-linking agent, cross-linking time 1 to 4 hours and 3:1 ratio of polymer-to-drug with two different polymers. From these twenty batches of each polymer, the optimized formulation is selected based on the percentage of mucoadhesion, drug entrapment efficiency and sphericity of microspheres. A 32 full factorial design was employed to study the effect of independent variables, polymer-to-drug ratio (X1, and stirring speed (X2 on dependent variables percentage of mucoadhesion, drug entrapment efficiency, swelling index and in-vitro drug release study. The drug polymer compatibility studies were carried out using FTIR. Among the two polymers hydroxypropylmethyl cellulose K4M exhibited a high drug entrapment efficiency of 79% and a swelling index 1.260, percentage of mucoadhesive after 1hour was 80% and the drug release was also sustained for more than 10 hours.

  4. Optimization of Cu(II) biosorption onto Ascophyllum nodosum by factorial design methodology.

    Science.gov (United States)

    Freitas, Olga; Delerue-Matos, Cristina; Boaventura, Rui

    2009-08-15

    A Box-Behnken factorial design coupled with surface response methodology was used to evaluate the effects of temperature, pH and initial concentration in the Cu(II) sorption process onto the marine macro-algae Ascophyllum nodosum. The effect of the operating variables on metal uptake capacity was studied in a batch system and a mathematical model showing the influence of each variable and their interactions was obtained. Study ranges were 10-40 degrees C for temperature, 3.0-5.0 for pH and 50-150 mg L(-1) for initial Cu(II) concentration. Within these ranges, the biosorption capacity is slightly dependent on temperature but markedly increases with pH and initial concentration of Cu(II). The uptake capacities predicted by the model are in good agreement with the experimental values. Maximum biosorption capacity of Cu(II) by A. nodosum is 70 mg g(-1) and corresponds to the following values of those variables: temperature=40 degrees C, pH=5.0 and initial Cu(II) concentration=150 mg L(-1).

  5. Design of a 10**36 CM-2 S-1 Super-B Factory

    Energy Technology Data Exchange (ETDEWEB)

    Biagini, M.E.; Boni, R.; Boscolo, M.; Demma, T.; Drago, A.; Guiducci, S.; Raimondi, P.; Tomassini, S.; Zobov, M.; /Frascati; Bertsche, Kirk J.; Novokhatski, A.; Seeman, J.; Sullivan, M.; Wienands, U.; Wittmer, W.; /SLAC; Bettoni, S.; /CERN; Paoloni, E.; Marchiori, G.; /Pisa U.; Bogomyagkov, A.; Koop, I.; Levichev, E.; /Novosibirsk, IYF

    2011-10-24

    Parameters have been studied for a high luminosity e{sup +}e{sup -} collider operating at the Upsilon 4S that would deliver a luminosity of 1 to 4 x 10{sup 36}/cm{sup 2}/s. This collider, called a Super-B Factory, would use a combination of linear collider and storage ring techniques. In this scheme an electron beam and a positron beam are stored in low-emittance damping rings similar to those designed for a Linear Collider (LC) or the next generation light source. A LC style interaction region is included in the ring to produce sub-millimeter vertical beta functions at the collision point. A large crossing angle (+/- 24 mrad) is used at the collision point to allow beam separation. A crab-waist scheme is used to reduce the hourglass effect and restore peak luminosity. Beam currents of 1.8 A at 4 x 7 GeV in 1251 bunches can produce a luminosity of 10{sup 36}/cm{sup 2}/s with upgrade possibilities. Such a collider would produce an integrated luminosity of about 10,000 fb{sup -1} (10 ab{sup -1}) in a running year (10{sup 7} sec) at the {gamma}(4S) resonance. Further possibilities include having longitudinally polarized e- at the IR and operating at the J/Psi and Psi beam energies.

  6. Full Factorial Experimental Design Analysis of Reactive Dye Removal by Carbon Adsorption

    Directory of Open Access Journals (Sweden)

    N. Özbay

    2013-01-01

    Full Text Available The objective of this study was to investigate the removal of Remazol Yellow dye from aqueous solutions by adsorption on activated carbon prepared by chemical activation of sunflower seed cake. It was found that the carbon content of biomass increases up to 65.12% after activation and carbonization processes. The maximum percentage dye removal was obtained as 82.12% with 0.4 g/50 mL adsorbent dosage at 313 K. The Langmuir model showed the best fit with equilibrium isotherm data. The interactions were evaluated with respect to both pseudo-first-order and pseudo-second-order reaction kinetics. The adsorption process was found to follow the pseudo-second-order model. To optimize the operating conditions, the effects of pH, adsorbent dosage, and initial dye concentration were investigated by full factorial experimental design method; adsorbent dosage was found as the most significant factor with lower than 95% confidence level. The obtained results are very promising since (i the utilization of sunflower seed cake activated carbon (SSCAC played a critical role in the adsorption of dye; (ii sunflower seed cake was an intriguing, low-cost, and easily available material. It can be an alternative adsorbent precursor for more expensive adsorbents used for Remazol Yellow (RY removal.

  7. Full factorial design, physicochemical characterization of phenylephrine HCl loaded oral thin film

    Directory of Open Access Journals (Sweden)

    Minal Bonde

    2015-01-01

    Full Text Available Oral dissolving drug delivery system offers a solution for those patients having difficulty in swallowing tablets/capsules. The primary objective of the present research work was to optimize oral thin film (OTF formulation of phenylephrine HCl, a water soluble drug with three loading concentrations: High, medium and low and also to evaluate their effect on the final product attributes. The OTF was prepared by solvent casting method. All the formulations were evaluated for film forming properties, appearance, thickness, folding endurance, tensile strength, percent moisture absorption, surface morphology, in vitro and in vivo disintegration. Formulations containing low and medium loading concentration gave acceptable results while formulation with higher loading concentration resulting poor film forming properties. Hence, another objective of the present study was to investigate the effect of anti-tacking agent namely magnesium aluminum silicate (MAS, microcrystalline cellulose and colloidal silicon dioxide (CSD by applying 2 3 full factorial design on improving the film properties of high concentration phenylephrine HCl. Formulation containing microcystalline cellulose and CSD at low level and MAS at high level was found to be suitable for film formation with desirable physicochemical properties, faster disintegration and optimum in vitro release.

  8. Optimization of cardiovascular stent against restenosis: factorial design-based statistical analysis of polymer coating conditions.

    Directory of Open Access Journals (Sweden)

    Gayathri Acharya

    Full Text Available The objective of this study was to optimize the physicodynamic conditions of polymeric system as a coating substrate for drug eluting stents against restenosis. As Nitric Oxide (NO has multifunctional activities, such as regulating blood flow and pressure, and influencing thrombus formation, a continuous and spatiotemporal delivery of NO loaded in the polymer based nanoparticles could be a viable option to reduce and prevent restenosis. To identify the most suitable carrier for S-Nitrosoglutathione (GSNO, a NO prodrug, stents were coated with various polymers, such as poly (lactic-co-glycolic acid (PLGA, polyethylene glycol (PEG and polycaprolactone (PCL, using solvent evaporation technique. Full factorial design was used to evaluate the effects of the formulation variables in polymer-based stent coatings on the GSNO release rate and weight loss rate. The least square regression model was used for data analysis in the optimization process. The polymer-coated stents were further assessed with Differential scanning calorimetry (DSC, Fourier transform infrared spectroscopy analysis (FTIR, Scanning electron microscopy (SEM images and platelet adhesion studies. Stents coated with PCL matrix displayed more sustained and controlled drug release profiles than those coated with PLGA and PEG. Stents coated with PCL matrix showed the least platelet adhesion rate. Subsequently, stents coated with PCL matrix were subjected to the further optimization processes for improvement of surface morphology and enhancement of the drug release duration. The results of this study demonstrated that PCL matrix containing GSNO is a promising system for stent surface coating against restenosis.

  9. New Tagging Method of B Flavor of Neutral B Meson in CP Violation Measurement in Asymmetric B-Factory Experiment

    Science.gov (United States)

    Enomoto, Ryoji

    1994-10-01

    In CP violation measurements in asymmetric B-factory experiments, a determination of the B flavor of the neutral B mesons is necessary. A new method to this purpose using only three vectors of charged particles has been developed. This method (weighted charge method) does not require either lepton identification or charged-kaon identification. The tagging efficiency, probability for incorrect tagging, and effective tagging efficiency of this method are 43.1, 18.3, and 17.3%, respectively.

  10. New tagging method of B flavor of neutral B meson in CP violation measurement in asymmetric b-factory experiment

    CERN Document Server

    Enomoto, R

    1994-01-01

    In CP violation measurements in asymmetric B-factory experiments, a determination of the B flavor of the neutral B mesons is necessary. A new method to this purpose using only three vectors of charged particles has been developed. This method (weighted charge method) does not require either lepton identification or charged-kaon identification. The tagging efficiency, probability for incorrect tagging, and effective tagging efficiency of this method are 43.1, 18.3, and 17.3\\%, respectively.

  11. New Tagging Method of B Flavor of Neutral B Meson in CP Violation Measurement in Asymmetric B-Factory Experiment

    OpenAIRE

    1994-01-01

    In CP violation measurements in asymmetric B-factory experiments, a determination of the B flavor of the neutral B mesons is necessary. A new method to this purpose using only three vectors of charged particles has been developed. This method (weighted charge method) does not require either lepton identification or charged-kaon identification. The tagging efficiency, probability for incorrect tagging, and effective tagging efficiency of this method are 43.1, 18.3, and 17.3\\%, respectively.

  12. Spatial experiences and interaction design

    DEFF Research Database (Denmark)

    Dalsgård, Peter

    2006-01-01

    IT is rapidly spreading to non-desktop environments, and is increasingly being used for post-functional purposes. Recent contributions within the field of interaction design have indicated a tight coupling between physico-spatial and experiential issues, both on a technological and on a theoretical...... level. However, interaction design and HCI yet has little to offer designers working with physico-spatial and experiential issues in practical design cases. In this paper, I argue that experiments that explore spatial and experiential aspects are crucial in developing the practice of interaction design....... These  aspects may be brought to the forefront by engaging in, reflecting upon, and reporting from physico-spatial design experiments, and by making spatial and experience-oriented design representations part of the design process. These experiments may be supported by design representations inspired...

  13. Desenvolvimento de elastômeros termoplásticos vulcanizados (TPV a base de polipropileno com resíduo de pneu: I - Planejamento fatorial de experimentos Development of thermoplastic elastomers vulcanized (TPV with polypropylene waste tire: I - Factorial design experiments

    Directory of Open Access Journals (Sweden)

    Matheus M. Cossa

    2009-01-01

    Full Text Available O uso do pó de pneu em misturas com termoplásticos possibilita a formação de novos materiais. Nesse trabalho o uso do pó de pneu foi caracterizado pelo planejamento fatorial completo 2³, com ponto central, em misturas com polipropileno (PP, para desenvolvimento de novos elastômeros termoplásticos vulcanizados dinamicamente (TPVs, contendo material reciclado. Os fatores utilizados neste estudo foram, pó de pneu, peróxido de dicumila e bismaleimida (em três n��veis, sendo um deles, o ponto central. O planejamento foi construído para avaliar os efeitos dos fatores (principais e suas interações nas respostas de tração, alongamento e inchamento em óleo. Os resultados mostraram que o teor de pó de pneu é predominante para melhorar o desempenho das misturas. A resistência ao inchamento é aproximadamente 150% superior em algumas formulações.The use of waste tire in blends with thermoplastics enables the formation of new materials. In this paper the use of waste tire was characterized with a complete 2³ factorial design with central point, in blends with polypropylene (PP, in the development of new thermoplastic elastomers vulcanized dynamically (TPVs and containing recycled material. The factors used in this study were: waste tire, dicumylperoxide and bismaleimides in three levels, one being the central point. The factorial design was built to evaluate the effects of the factors (and their interaction in the responses of tensile, elongation and oil swelling. The results showed that the level of waste tire is predominant to improve the performance of TPV. The swelling resistance is approximately 150% higher in some formulations.

  14. Formulation development and evaluation of zolmitriptan oral soluble films using 22 factorial designs

    Science.gov (United States)

    Koteswari, Poluri; Sravanthi, G. Puja; Mounika, M.; Mohammed Rafi, S. K.; Nirosha, K.

    2016-01-01

    Objective: The present investigation involves the development of zolmitriptan oral soluble film (OSF) formulations and optimization with quality by design (QBD) using natural polymers and evaluation. Materials and Methods: Initially, various natural polymers such as sodium alginate, pectin, and gelatin were screened by casting films using solvent casting technique and the prepared films were evaluated. Based on the physical and mechanical properties, sodium alginate was selected as best film former and zolmitriptan-loaded films were casted. The formulation was optimized with the help of 22 factorial experimental designs (QBD) in which sodium alginate concentration and plasticizer concentrations were used as factors and at two levels. The drug-loaded films were evaluated for various mechanical, physicochemical properties, and in vitro drug release properties. Factor effects were interpreted by calculating the main factor effects and by plotting the interaction plots. Results: Thickness of the films, disintegration time, and percent drug loading efficiency were in the range of 0.698 ± 0.13–1.318 ± 0.22 mm, 175 ± 3.1–280 ± 1.7 s, and 68.34 ± 0.5–94.70 ± 0.7% w/v, respectively. Cumulative percent drug released was 61.8 ± 2.6–94.7 ± 4.1% after 30 min. Polymer concentration at two levels of plasticizer had statistically significant effect on drug loading efficiency and in vitro drug release rate. X2 formulation was found to be excellent in drug loading efficiency and in vitro drug release profiles; hence, drug excipient compatibility studies using Fourier transform infrared spectroscopy and stability studies for 60 days were carried out for X2 formulation and found to be stable. Conclusion: Sodium alginate OSFs containing zolmitriptan was successfully prepared, optimized, and evaluated. PMID:28123989

  15. Full factorial design optimization of anti-inflammatory drug release by PCL–PEG–PCL microspheres

    Energy Technology Data Exchange (ETDEWEB)

    Azouz, L' Hachemi, E-mail: azouz.chimie@gmail.com [Laboratoire des Matériaux Organiques (LMO), Faculté des Sciences Exactes, Département de Chimie, Université de Bejaia, 06000 Bejaia Algérie (Algeria); Dahmoune, Farid, E-mail: farid.dahmoune@yahoo.fr [Laboratoire de Biomathématiques, Biophysique, Biochimie et Scientométrie (L3BS-Bejaia), Faculté des Sciences de la Nature et de la Vie et des Sciences de la Terre, Université de Bouira 10000 Bouira (Algeria); Rezgui, Farouk, E-mail: rezgui-farouk@netcourrier.com [Laboratoire des Matériaux Organiques (LMO), Faculté de Technologie, Département de Génie des Procédés, Université de Bejaia, 06000 Bejaia (Algeria); G' Sell, Christian, E-mail: gsell.christian@univ-lorraine.fr [Université de Lorraine, Pôle scientifique M4, Institut Jean Lamour - UMR CNRS-UL 7198, Département SI2M, 54000 Nancy (France)

    2016-01-01

    A biodegradable triblock poly(ε-caprolactone)–poly(ethylene glycol)–poly(ε-caprolactone) copolymer was successfully synthesized by ring-opening polymerization of ε-caprolactone, and was characterized by intrinsic viscosimetry, {sup 1}H nuclear magnetic resonance, infrared spectroscopy and X-ray diffraction. Copolymer microparticles loaded with ibuprofen were prepared by an oil-in-water (o/w) emulsion solvent evaporation process. They were carefully weighted and characterized through their zeta potential. In this work, 4 selected process parameters (shaking speed X{sub 1}, time of contact X{sub 2}, poly(vinyl alcohol) concentration X{sub 3}, and ibuprofen concentration X{sub 4}) were adjusted at 2 different values. For each of the 16 experimental conditions, repeated twice, the drug encapsulation efficiency of the microspheres was determined, according to the following definition: EE (X{sub 1}, X{sub 2}, X{sub 3}, X{sub 4}) = mass of encapsulated ibuprofen / total weight of ibuprofen. A “full factorial design method” was applied to analyze the results statistically according to a polynomial fit and to determine the optimal conditions for the microencapsulation of the ibuprofen through an accurate statistical protocol. The microparticles obtained exhibit a spherical shape as shown by electron microscopy. - Highlights: • PCEC copolymer was synthesized by ring-opening polymerization of ε-caprolactone. • 2{sup 4} experimental design was used to optimize the IBF encapsulation efficiency (EE). • 88.86% of ibuprofen (IBF) was encapsulated in PCEC microspheres. • EE significantly decreases with increasing shaking speed (antagonist effect). • EE significantly increases with increasing IBF concentration (synergetic effect).

  16. Statistical optimization of the growth factors for Chaetoceros neogracile using fractional factorial design and central composite design.

    Science.gov (United States)

    Jeong, Sung-Eun; Park, Jae-Kweon; Kim, Jeong-Dong; Chang, In-Jeong; Hong, Seong-Joo; Kang, Sung-Ho; Lee, Choul-Gyun

    2008-12-01

    Statistical experimental designs; involving (i) a fractional factorial design (FFD) and (ii) a central composite design (CCD) were applied to optimize the culture medium constituents for production of a unique antifreeze protein by the Antartic microalgae Chaetoceros neogracile. The results of the FFD suggested that NaCl, KCl, MgCl2, and Na2SiO3 were significant variables that highly influenced the growth rate and biomass production. The optimum culture medium for the production of an antifreeze protein from C. neogracile was found to be Kalleampersandrsquor;s artificial seawater, pH of 7.0ampersandplusmn;0.5, consisting of 28.566 g/l of NaCl, 3.887 g/l of MgCl2, 1.787 g/l of MgSO4, 1.308 g/l of CaSO4, 0.832 g/l of K2SO4, 0.124 g/l of CaCO3, 0.103 g/l of KBr, 0.0288 g/l of SrSO4, and 0.0282 g/l of H3BO3. The antifreeze activity significantly increased after cells were treated with cold shock (at -5oC) for 14 h. To the best of our knowledge, this is the first report demonstrating an antifreeze-like protein of C. neogracile.

  17. fullfact: an R package for the analysis of genetic and maternal variance components from full factorial mating designs.

    Science.gov (United States)

    Houde, Aimee Lee S; Pitcher, Trevor E

    2016-03-01

    Full factorial breeding designs are useful for quantifying the amount of additive genetic, nonadditive genetic, and maternal variance that explain phenotypic traits. Such variance estimates are important for examining evolutionary potential. Traditionally, full factorial mating designs have been analyzed using a two-way analysis of variance, which may produce negative variance values and is not suited for unbalanced designs. Mixed-effects models do not produce negative variance values and are suited for unbalanced designs. However, extracting the variance components, calculating significance values, and estimating confidence intervals and/or power values for the components are not straightforward using traditional analytic methods. We introduce fullfact - an R package that addresses these issues and facilitates the analysis of full factorial mating designs with mixed-effects models. Here, we summarize the functions of the fullfact package. The observed data functions extract the variance explained by random and fixed effects and provide their significance. We then calculate the additive genetic, nonadditive genetic, and maternal variance components explaining the phenotype. In particular, we integrate nonnormal error structures for estimating these components for nonnormal data types. The resampled data functions are used to produce bootstrap-t confidence intervals, which can then be plotted using a simple function. We explore the fullfact package through a worked example. This package will facilitate the analyses of full factorial mating designs in R, especially for the analysis of binary, proportion, and/or count data types and for the ability to incorporate additional random and fixed effects and power analyses.

  18. AutoPyFactory: A Scalable Flexible Pilot Factory Implementation

    CERN Document Server

    Caballero, J; The ATLAS collaboration; Love, P; Stewart, G

    2012-01-01

    The ATLAS experiment at the CERN LHC is one of the largest users of grid computing infrastructure, which is a central part of the experiment’s computing operations. Considerable efforts have been made to use grid technology in the most efficient and effective way, including the use of a pilot job based workload management framework. In this model the experiment submits ’pilot’ jobs to sites without payload. When these jobs begin to run they contact a central service to retrieve a real payload to execute. The first generation of pilot factories were usually specific to a single VO, and were bound to the particular architecture of that VO’s distributed processing. A second generation provides factories which are more flexible, not tied to any particular VO, and provide new or improved features such as monitoring, logging, profiling, etc. In this paper we describe this key part of the ATLAS pilot architecture, a second generation pilot factory, AutoPyFactory. AutoPyFactory has a modular design and is hig...

  19. Methodology of factorial design deriving guidelines for simulation of growth curve and production of sugars by Spirulina (Arthrospira) maxima

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    It is practical, economic and sometimes essential to derive rules or conclusions by performing lesser runs of experiments. In this part, a methodology based on 2f factorial design was brought up to derive guidelines to simulate growth curve and production of sugars by Spirulina (Arthrospira) maxima. The growth curve or accumulation process of sugars was idealized by sets of straight lines limited by phase transfers of growth or accumulation of sugars. Normal analyses of the critical values of the transfers were used to derive their linear relationships with the initial conditions of the experimental factors. These linear functions were called guidelines and were used to simulate the growth curve or accumulation of sugars. Generalization of the guideline technique was determined by the kinetic limitation of nutrient nitrogen or sulfur that was dependent upon their stoichiometric deficiency directly derived from their initial values in the medium. This method uses the initial conditions of culture and does not need measurements of concentrations of nitrate, sulfate and pigments during cultivation. It is a practical and useful alternative way to trace and predict approximately the growth curve and production of sugars by S. maxima.

  20. Analytical Enantio-Separation of Linagliptin in Linagliptin and Metformin HCl Dosage Forms by Applying Two-Level Factorial Design

    Directory of Open Access Journals (Sweden)

    Sushant B. Jadhav

    2016-10-01

    Full Text Available A novel, stability indicating, reverse phase high-performance liquid chromatography (RP-HPLC method was developed to determine the S-isomer of linagliptin (LGP in linagliptin and metformin hydrochloride (MET HCl tablets (LGP–MET HCl by implementing design of experiment (DoE, i.e., two-level, full factorial design (23 + 3 centre points = 11 experiments to understand the critical method parameters (CMP and its relation with the critical method attribute (CMA, and to ensure robustness of the method. The separation of the S-isomer, LGP and MET HCl in the presence of their impurities was achieved on Chiralpak® IA-3 (Amylose tris (3, 5-dimethylphenylcarbamate, immobilized on 3 µm silica gel stationary phase (250 × 4.6 mm, 3 µm using isocratic elution and detector wavelength at 225 nm with a flow rate of 0.5 mL·min−1, an injection volume of 10 µL with a sample cooler (5 °C and column oven temperature of 25 °C. Ethanol:Methanol:Monoethanolamine (EtOH:MeOH:MEA in the ratio of 60:40:0.2 v/v/v was used as a mobile phase. The developed method was validated in accordance with international council for harmonisation (ICH guidelines and was applied for the estimation of the S-isomer of LGP in LGP–MET HCl tablets. The same method also can be extended for the estimation of the S-isomer in LGP dosage forms.

  1. nparLD: An R Software Package for the Nonparametric Analysis of Longitudinal Data in Factorial Experiments

    Directory of Open Access Journals (Sweden)

    Kimihiro Noguchi

    2012-09-01

    Full Text Available Longitudinal data from factorial experiments frequently arise in various fields of study, ranging from medicine and biology to public policy and sociology. In most practical situations, the distribution of observed data is unknown and there may exist a number of atypical measurements and outliers. Hence, use of parametric and semi-parametric procedures that impose restrictive distributional assumptions on observed longitudinal samples becomes questionable. This, in turn, has led to a substantial demand for statistical procedures that enable us to accurately and reliably analyze longitudinal measurements in factorial experiments with minimal conditions on available data, and robust nonparametric methodology offering such a possibility becomes of particular practical importance. In this article, we introduce a new R package nparLD which provides statisticians and researchers from other disciplines an easy and user-friendly access to the most up-to-date robust rank-based methods for the analysis of longitudinal data in factorial settings. We illustrate the implemented procedures by case studies from dentistry, biology, and medicine.

  2. Método estadístico factorial a dos niveles aplicado en los experimentos de explotación de los Simuladores. // Two levels factorial statistical method applied in experiments of Simulators operation.

    Directory of Open Access Journals (Sweden)

    P. Moreno Quintana

    2002-05-01

    Full Text Available La introducción de los simuladores en el proceso de instrucción en el país cuenta con una dificultad al no conocerse el realimpacto de este tipo de equipamiento en la adquisición de las habilidades dentro del proceso de entrenamiento a que vadirigido.El empleo del método estadístico factorial a dos niveles permite la obtención de un modelo lineal de respuesta de laeficiencia, o calificación, en función de la forma cuantitativa de empleo de los diversos medios de entrenamiento y suscombinaciones.Este modelo es validado con un nivel de confianza calculado y puede ser optimizado por los métodos matemáticoscorrespondientes. Para esto se realiza un grupo de recomendaciones en la organización de los experimentos que han sidoobtenidos durante la aplicación de este método en diversas ocasiones.Palabras claves: Simuladores, modelación matemática, diseño de experimentos._____________________________________________________________________________Abstract.The introduction of simulators in the country´s instruction process deals with the difficulty of not knowing the real impactof this equipment in the acquisition of abilities within the training process. The use of the factorial statistical method at twolevels allows the obtaining of a linear model with answer about efficiency or qualification based on the quantitative form ofuse of diverse means of training and its combinations. This model is validated with a calculated level of confidence and canbe optimized by the corresponding mathematical methods. For this a group of recommendations is made in the organizationof experiments that have been obtained during the application of this method in diverse combnations.Key words: Simulators, mathematical modelation, experiment design.

  3. Engineering microbial cell factories for the production of plant natural products: from design principles to industrial-scale production.

    Science.gov (United States)

    Liu, Xiaonan; Ding, Wentao; Jiang, Huifeng

    2017-07-19

    Plant natural products (PNPs) are widely used as pharmaceuticals, nutraceuticals, seasonings, pigments, etc., with a huge commercial value on the global market. However, most of these PNPs are still being extracted from plants. A resource-conserving and environment-friendly synthesis route for PNPs that utilizes microbial cell factories has attracted increasing attention since the 1940s. However, at the present only a handful of PNPs are being produced by microbial cell factories at an industrial scale, and there are still many challenges in their large-scale application. One of the challenges is that most biosynthetic pathways of PNPs are still unknown, which largely limits the number of candidate PNPs for heterologous microbial production. Another challenge is that the metabolic fluxes toward the target products in microbial hosts are often hindered by poor precursor supply, low catalytic activity of enzymes and obstructed product transport. Consequently, despite intensive studies on the metabolic engineering of microbial hosts, the fermentation costs of most heterologously produced PNPs are still too high for industrial-scale production. In this paper, we review several aspects of PNP production in microbial cell factories, including important design principles and recent progress in pathway mining and metabolic engineering. In addition, implemented cases of industrial-scale production of PNPs in microbial cell factories are also highlighted.

  4. Variations in GPs' decisions to investigate suspected lung cancer: a factorial experiment using multimedia vignettes.

    Science.gov (United States)

    Sheringham, Jessica; Sequeira, Rachel; Myles, Jonathan; Hamilton, William; McDonnell, Joe; Offman, Judith; Duffy, Stephen; Raine, Rosalind

    2017-06-01

    Lung cancer survival is low and comparatively poor in the UK. Patients with symptoms suggestive of lung cancer commonly consult primary care, but it is unclear how general practitioners (GPs) distinguish which patients require further investigation. This study examined how patients' clinical and sociodemographic characteristics influence GPs' decisions to initiate lung cancer investigations. A factorial experiment was conducted among a national sample of 227 English GPs using vignettes presented as simulated consultations. A multimedia-interactive website simulated key features of consultations using actors ('patients'). GP participants made management decisions online for six 'patients', whose sociodemographic characteristics systematically varied across three levels of cancer risk. In low-risk vignettes, investigation (ie, chest X-ray ordered, computerised tomography scan or respiratory consultant referral) was not indicated; in medium-risk vignettes, investigation could be appropriate; in high-risk vignettes, investigation was definitely indicated. Each 'patient' had two lung cancer-related symptoms: one volunteered and another elicited if GPs asked. Variations in investigation likelihood were examined using multilevel logistic regression. GPs decided to investigate lung cancer in 74% (1000/1348) of vignettes. Investigation likelihood did not increase with cancer risk. Investigations were more likely when GPs requested information on symptoms that 'patients' had but did not volunteer (adjusted OR (AOR)=3.18; 95% CI 2.27 to 4.70). However, GPs omitted to seek this information in 42% (570/1348) of cases. GPs were less likely to investigate older than younger 'patients' (AOR=0.52; 95% CI 0.39 to 0.7) and black 'patients' than white (AOR=0.68; 95% CI 0.48 to 0.95). GPs were not more likely to investigate 'patients' with high-risk than low-risk cancer symptoms. Furthermore, they did not investigate everyone with the same symptoms equally. Insufficient data gathering

  5. Degradation characteristics of metoprolol during UV/chlorination reaction and a factorial design optimization.

    Science.gov (United States)

    Nam, Seung-Woo; Yoon, Yeomin; Choi, Dae-Jin; Zoh, Kyung-Duk

    2015-03-21

    Metoprolol (MTP), a hypertension depressor, has been increasingly detected even after conventional water treatment processes. In this study, the removal of MTP was compared using chlorination (Cl2), UV-C photolysis, and UV/chlorination (Cl2/UV) reactions. The results showed that the UV/chlorination reaction was most effective for MTP removal. MTP removal during UV/chlorination reaction was optimized under various conditions of UV intensity (1.1-4.4 mW/cm(2)), chlorine dose (1-5 mg/L as Cl2), pH (2-9), and dissolved organic matter (DOM, 1-4 mgC/L) using a two-level factorial design with 16 experimental combinations of the four factors. Among the factors examined, DOM scavenging by OH radicals was the most dominant in terms of MTP removal during UV/chlorination reaction. The established model fit well with the experimental results using to various water samples including surface waters, filtered and tap water samples. The optimized conditions (UV intensity=4.4 mW/cm(2), [Cl2]=5 mg/L, pH 7, and [DOM]=0.8-1.1 mgC/L) of the model removed more than 78.9% of MTP for filtered water samples during UV/chlorination reaction. Using LC-MS/MS, five byproducts of MTP (molecular weight: 171, 211, 309, 313, and 341, respectively) were identified during UV/chlorination reaction. Based on this information, the MTP transformation mechanism during UV/chlorination was suggested. Our results imply that applying UV/chlorination process after filtration stage in the water treatment plant (WTP) would be the most appropriate for effective removal of MTP.

  6. Study of Electrochemical Degradation of Bromophenol Blue at Boron-doped Diamond Electrode by Using Factorial Design Analysis

    Directory of Open Access Journals (Sweden)

    Rong Fei

    2015-01-01

    Full Text Available As an ideal anode material, Boron-doped diamond (BDD has been widely applied in electro-chemical oxidation of various organic pollutants, for its unique physical and chemical properties. In this paper, the authors studied the degradation of bromophenol blue through the electrochemical anodic oxidation by using the boron-doped BDD as the anode. The effect of statistically important operating parameters on treatment per-formance, such as treatment time, flow rate, applied current and concentration of supporting electrolyte, was evaluated by employing a factorial design analysis in terms of color removal and COD removal amount. As a result, the BDD technology was approved to be highly effective in treating bromophenol blue. Moreover, the results revealed the applicability and potential of factorial design analysis in operating parameters optimization and practical engineering application of BDD technology.

  7. A Fractional Factorial Design to Study the Effect of Process Variables on the Preparation of Hyaluronidase Loaded PLGA Nanoparticles

    Directory of Open Access Journals (Sweden)

    K. Narayanan

    2014-01-01

    Full Text Available The present study was initiated to understand the effect of PLGA concentration, PVA concentration, internal-external phase ratio, homogenization speed, and homogenization time on mean particle size, zeta potential, and percentage drug encapsulation using fractional factorial design. Using PLGA (50-50 as the carrier, hyaluronidase loaded PLGA nanoparticles were prepared using double emulsion solvent evaporation technique. The particle size was analyzed by dynamic light scattering technique and protein content by Lowry method. The study showed that homogenization speed as an independent variable had maximum effect on particle size and zeta potential. Internal-external phase volume ratio had maximum effect on drug encapsulation. Mean particle size also had high dependency on the combined effect of PVA concentration and phase volume ratio. Using fractional factorial design particle size of <400 nm, zeta potential of <−30 mV, and percentage encapsulation of 15–18% were achieved.

  8. Analyze of Impedance for Water Management in Proton Exchange Membrane Fuel Cells Using Factorial Design of (DoE) Methodology

    OpenAIRE

    Khaled Mammar; Abdelkader Chaker

    2014-01-01

    Electrochemical impedance spectroscopy (EIS) is a very powerful tool for exploitation as a rich source of Proton Exchange Membrane Fuel Cell (PEMFC) diagnostic information. A primary goal of this work is to develop a suitable PEMFC impedance model, which can be used to analyze flooding and drying of the fuel cell. For this one a novel optimization method based on Factorial Design methodology is used. It was applied to parametric analysis of electrochemical impedance Thus it is pos...

  9. Factorial design based preparation, optimization, characterization and in vitro drug release studies of olanzapine loaded PLGA nanoparticles

    Science.gov (United States)

    Bohrey, Sarvesh; Chourasiya, Vibha; Pandey, Archna

    2016-12-01

    The objective of the present work was to develop and optimize olanzapine loaded polymeric nanoparticles using a factorial design. The presented work developed and optimized olanzapine loaded polymeric nanoparticles by using a 33 factorial design. The 33 factorial design was used for studying the effect of the main preparation variables on particle size and percent drug entrapment efficiency of the nanoparticles. A modified nanoprecipitation method was used to prepare nanoparticles successfully by using the biodegradable polymer poly(lactic-co-glycolic)acid (PLGA), and they were characterized for various parameters such as particle size, shape, zeta potential, percent drug entrapment efficiency, percent process yield and in vitro drug release behavior. Examination of the interaction between the excipients used as well as investigation of the nature of the drug, the formulation and the nature of the drug in the formulations was carried out by FTIR studies. Different kinetic models were used to analyze the in vitro drug release data. The preferred formulation showed a particle size of 127.6 ± 1.9 nm, PDI of 0.239 ± 0.013, zeta potential of -29.2 mV, entrapment efficiency of 72.46 ± 3.8% and process yield of 89.65 ± 1.3%. TEM results showed that these nanoparticles were spherical in shape and follow the Korsmeyer-Peppas model with different release exponent values.

  10. Structural Assembly Demonstration Experiment (SADE) experiment design

    Science.gov (United States)

    Akin, D. L.; Bowden, M. L.

    1982-03-01

    The Structural Assembly Demonstration Experiment concept is to erect a hybrid deployed/assembled structure as an early space experiment in large space structures technology. The basic objectives can be broken down into three generic areas: (1) by performing assembly tasks both in space and in neutral buoyancy simulation, a mathematical basis will be found for the validity conditions of neutral buoyancy, thus enhancing the utility of water as a medium for simulation of weightlessness; (2) a data base will be established describing the capabilities and limitations of EVA crewmembers, including effects of such things as hardware size and crew restraints; and (3) experience of the M.I.T. Space Systems Lab in neutral buoyancy simulation of large space structures assembly indicates that the assembly procedure may create the largest loads that a structure will experience during its lifetime. Data obtained from the experiment will help establish an accurate loading model to aid designers of future space structures.

  11. Railways Factory in Resita

    Directory of Open Access Journals (Sweden)

    Cornel Iacob-Mare

    2013-09-01

    Full Text Available This paper proposes an exemption Analysis railway factory in Resita impressed having experience and also provide some technical characteristics of freight wagons representative technology, used to transport products made in factories in ReşiŃa.

  12. Designing experiments through compressed sensing.

    Energy Technology Data Exchange (ETDEWEB)

    Young, Joseph G.; Ridzal, Denis

    2013-06-01

    In the following paper, we discuss how to design an ensemble of experiments through the use of compressed sensing. Specifically, we show how to conduct a small number of physical experiments and then use compressed sensing to reconstruct a larger set of data. In order to accomplish this, we organize our results into four sections. We begin by extending the theory of compressed sensing to a finite product of Hilbert spaces. Then, we show how these results apply to experiment design. Next, we develop an efficient reconstruction algorithm that allows us to reconstruct experimental data projected onto a finite element basis. Finally, we verify our approach with two computational experiments.

  13. DESIGN OF EXPERIMENTS IN TRUCK COMPANY

    Directory of Open Access Journals (Sweden)

    Bibiana Kaselyova

    2015-07-01

    Full Text Available Purpose: Design of experiment (DOE represent very powerful tool for process improvement vastly supported by six sigma methodology. This approach is mostly used by large and manufacturing orientated companies. Presented research is focused on use of DOE in truck company, which is medium size and service orientated. Such study has several purposes. Firstly, detailed description of improvement effort based on DOE can be used as a methodological framework for companies similar to researched one. Secondly, it provides example of successfully implemented low cost design of experiment practise. Moreover, performed experiment identifies key factors, which influence the lifetime of truck tyres.Design/methodology: The research in this paper is based on experiment conducted in Slovakian Truck Company. It provides detailed case study of whole improvement effort, together with problem formulation, design creation and analysis, as well as the results interpretation. The company wants to improve lifetime of the truck tyres. Next to fuel consumption, consumption of tyres and their replacement represent according to them, one of most costly processes in company. Improvement effort was made through the use of PDCA cycle. It start with analysis of current state of tyres consumption. The variability of tyres consumption based on years and types was investigated. Then the causes of tyres replacement were identified and screening DOE was conducted. After a screening design, the full factorial design of experiment was used to identify main drivers of tyres deterioration and breakdowns. Based on result of DOE, the corrective action were propose and implement.Findings: Based on performed experiment our research describes process of tyres use and replacement. It defines main reasons for tyre breakdown and identify main drivers which influence truck tyres lifetime. Moreover it formulates corrective action to prolong tyres lifetime.Originality: The study represents full

  14. Used frying oil biodiesel production: experimental factorial design and multivariate analysis

    Directory of Open Access Journals (Sweden)

    Rosana de Cassia de Souza Schneider

    2009-01-01

    Full Text Available Biodiesel é derivado de fontes renováveis ereduz significativamente as emissões atmosféricas. Pode serobtido de diversos processos, como a alcoolise. Nestetrabalho, o biodiesel foi produzido através da alcoolise doóleo de fritura usado de indústrias de alimentação. Umplanejamento experimental foi utilizado e os produtos dereação foram analisados por cromatografia gasosa (CGespectroscopia na região do infravermelho com acessório dereflexão total atenuada horizontal (IV-HATR e análiseexploratória por análise de componentes principais (PCA eanálise hierárquica de grupos (HCA. De acordo com ascondições analisadas obteve-se alta conversão em ésteresmetílicos. Por IV-HATR, a conversão máxima foi observadaem condições experimentais de temperatura ( 50 e 60°C,concentração de catalisador (0,6 e 1,2% e a 1:8 de relaçãomolar entre óleo e metanol. Também foi possíveldiscriminar por análise quimiométrica, 4 grupos noplanejamento experimental e determinar as melhorescondições para a produção de biodiesel de óleo de friturausado.Abstract Biodiesel is derived from renewable sources and it significantly reduces atmospheric emissions. It can be obtained byseveral processes, such as alcoholysis. In this work, biodiesel was produced through alcoholysis of used frying oil from a cateringbusiness. An experimental factorial design was used and the reaction products were analyzed through gas chromatography (GC,horizontal attenuated total reflection Fourier transform infrared (HATR/FT-IR spectroscopy and exploratory analysis withprincipal component analysis (PCA and hierarchical cluster analysis (HCA. Under the conditions analyzed, a high degree ofconversion to methyl ester was found. As shown by HATR/FT-IR, the maximum conversion was obtained when the experimentalconditions had the temperature ( 50 e 60°C, largest catalyst concentration (0,6 e 1,2% and a 1:8 molar proportion of oil tomethanol. It was possible to discriminate

  15. A Fractional Factorial Design Study of Reciprocating Wear Behavior of Al-Si-SiCp Composites at Lubricated Contacts

    Science.gov (United States)

    Rajeev, V. R.; Dwivedi, D. K.; Jain, S. C.

    2011-04-01

    The lubricated reciprocating wear behavior of two composites A319/15%SiCp and A390/15%SiCp produced by the liquid metallurgy route was investigated by means of an indigenously developed reciprocating friction wear test rig using a fractional factorial-design approach. The main purpose was to study the influence of wear and friction test parameters such as applied load, sliding distance, reciprocating velocity, counter surface temperature and silicon content in composites, as well as their interactions on the wear and friction characteristics of these composites. Two output responses (wear loss and coefficient of friction) were measured. The input parameter levels were fixed through pilot experiment conducted in the newly developed reciprocating friction and wear test rig. The counter surface material used for the wear study was cast iron having Vickers hardness of 244 HVN. It had been demonstrated through established equations that A390/15%SiCp composite is subjected to low wear compared to the A319/15%SiCp composite. The experimental results indicate that the proposed mathematical models suggested could adequately describe the performance indicators within the limits of the factors that are being investigated. The applied load, sliding distance, reciprocating velocity, counter surface temperature, and silicon content in composite are the five important factors controlling the friction and wear characteristics of the composite in lubricated condition. Moreover, the two factor interactions have a strong effect on the wear of composites. The results give a comprehensive insight into the wear of the composites.

  16. RELIABILITY AND DESIGN OF EXPERIMENTS

    Directory of Open Access Journals (Sweden)

    Adrian Stere PARIS

    2013-05-01

    Full Text Available The mechanical reliability uses many statistical tools to find the factors of influence and their levels inthe optimization of parameters on the basis of experimental data. Design of Experiments (DOE techniquesenables designers to determine simultaneously the individual and interactive effects of many factors that couldaffect the output results in any design. The state-of-the-art in the domain implies extended use of software and abasic mathematical knowledge, mainly applying ANOVA and the regression analysis of experimental data.

  17. Design and analysis of experiments

    CERN Document Server

    Dean, Angela; Draguljić, Danel

    2017-01-01

    This textbook takes a strategic approach to the broad-reaching subject of experimental design by identifying the objectives behind an experiment and teaching practical considerations that govern design and implementation, concepts that serve as the basis for the analytical techniques covered. Rather than a collection of miscellaneous approaches, chapters build on the planning, running, and analyzing of simple experiments in an approach that results from decades of teaching the subject. In most experiments, the procedures can be reproduced by readers, thus giving them a broad exposure to experiments that are simple enough to be followed through their entire course. Outlines of student and published experiments appear throughout the text and as exercises at the end of the chapters. The authors develop the theory of estimable functions and analysis of variance with detail, but at a mathematical level that is simultaneously approachable. Throughout the book, statistical aspects of analysis complement practical as...

  18. The Use of a Fractional Factorial Design to Determine the Factors That Impact 1,3-Propanediol Production from Glycerol by Halanaerobium hydrogeniformans

    Science.gov (United States)

    Kalia, Shivani; Trager, Jordan; Sitton, Oliver C.; Mormile, Melanie R.

    2016-01-01

    In recent years, biodiesel, a substitute for fossil fuels, has led to the excessive production of crude glycerol. The resulting crude glycerol can possess a high concentration of salts and an alkaline pH. Moreover, current crude glycerol purification methods are expensive, rendering this former commodity a waste product. However, Halanaerobium hydrogeniformans, a haloalkaliphilic bacterium, possesses the metabolic capability to convert glycerol into 1,3-propanediol, a valuable commodity compound, without the need for salt dilution or adjusting pH when grown on this waste. Experiments were performed with different combinations of 24 medium components to determine their impact on the production of 1,3-propanediol by using a fractional factorial design. Tested medium components were selected based on data from the organism’s genome. Analysis of HPLC data revealed enhanced production of 1,3-propanediol with additional glycerol, pH, vitamin B12, ammonium ions, sodium sulfide, cysteine, iron, and cobalt. However, other selected components; nitrate ions, phosphate ions, sulfate ions, sodium:potassium ratio, chloride, calcium, magnesium, silicon, manganese, zinc, borate, nickel, molybdenum, tungstate, copper and aluminum, did not enhance 1,3-propanediol production. The use of a fractional factorial design enabled the quick and efficient assessment of the impact of 24 different medium components on 1,3-propanediol production from glycerol from a haloalkaliphilic bacterium. PMID:27556494

  19. The Use of a Fractional Factorial Design to Determine the Factors That Impact 1,3-Propanediol Production from Glycerol by Halanaerobium hydrogeniformans

    Directory of Open Access Journals (Sweden)

    Shivani Kalia

    2016-08-01

    Full Text Available In recent years, biodiesel, a substitute for fossil fuels, has led to the excessive production of crude glycerol. The resulting crude glycerol can possess a high concentration of salts and an alkaline pH. Moreover, current crude glycerol purification methods are expensive, rendering this former commodity a waste product. However, Halanaerobium hydrogeniformans, a haloalkaliphilic bacterium, possesses the metabolic capability to convert glycerol into 1,3-propanediol, a valuable commodity compound, without the need for salt dilution or adjusting pH when grown on this waste. Experiments were performed with different combinations of 24 medium components to determine their impact on the production of 1,3-propanediol by using a fractional factorial design. Tested medium components were selected based on data from the organism’s genome. Analysis of HPLC data revealed enhanced production of 1,3-propanediol with additional glycerol, pH, vitamin B12, ammonium ions, sodium sulfide, cysteine, iron, and cobalt. However, other selected components; nitrate ions, phosphate ions, sulfate ions, sodium:potassium ratio, chloride, calcium, magnesium, silicon, manganese, zinc, borate, nickel, molybdenum, tungstate, copper and aluminum, did not enhance 1,3-propanediol production. The use of a fractional factorial design enabled the quick and efficient assessment of the impact of 24 different medium components on 1,3-propanediol production from glycerol from a haloalkaliphilic bacterium.

  20. Taguchi versus Full Factorial Design to Determine the Influence of Process Parameters on the Impact Forces Produced by Water Jets Used in Sewer Cleaning

    Science.gov (United States)

    Medan, N.; Banica, M.

    2016-11-01

    The regular cleaning of the materials deposed in sewer networks is realized, especially with equipment that uses high pressure water jets. The functioning of this equipment is dependent on certain process parameters that can vary, causing variations of the impact forces. The impact force directly affects the cleaning of sewer systems. In order to determine the influence of the process parameters on the impact forces produced by water jets the method of research used is the experiment. The research methods used is that Taguchi design and full factorial design. For the experimental determination of the impact forces a stand for generating water jets and a device for measuring the forces of impact are used. The processing of data is carried out using the Software Minitab 17.

  1. Analyze of Impedance for Water Management in Proton Exchange Membrane Fuel Cells Using Factorial Design of (DoE Methodology

    Directory of Open Access Journals (Sweden)

    Khaled Mammar

    2014-12-01

    Full Text Available Electrochemical impedance spectroscopy (EIS is a very powerful tool for exploitation as a rich source of Proton Exchange Membrane Fuel Cell (PEMFC diagnostic information. A primary goal of this work is to develop a suitable PEMFC impedance model, which can be used to analyze flooding and drying of the fuel cell. For this one a novel optimization method based on Factorial Design methodology is used. It was applied to parametric analysis of electrochemical impedance Thus it is possible to evaluate the relative importance of each parameter to the simulation accuracy. Furthermore this work presents an analysis of the PEMFC impedance behavior in the case of flooding and drying.

  2. Standardization of biosurfactant enrichment process by factorial design and elucidating its physico-chemical and structural characteristics

    Directory of Open Access Journals (Sweden)

    Karadi RV

    2012-08-01

    Full Text Available Biosurfactant recovery by Flavobacterium sp. was standardized by factorial design 3(k-p. The extraction of biosurfactant was carried out by organic solvent extraction, ammonium sulphate precipitation and acid precipitation. The organic solvent extraction was performed with varied proportion (3 levels of chloroform and methanol i.e. (X*:1 designated as F1 (varied proportion of chloroform and (1: X** referred as F2 (varied proportion of methanol respectively, similarly ammonium sulphate (F3 and acid precipitation (F4 was performed with 3 varying experimental level. The statistical data interpretation viz ANOVA, Pareto chart of standardized effect, Half normal probability plot inferred  organic solvent extraction as a efficient method for recovery of biosurfactant, than other counter parts of extraction .The surface plot between significant factors, given the standardized proportion of organic solvents for extraction of biosurfactant, which was found to be 1:1. Surface tension and CMC value of recovery biosurfactant was found to be 33 mN/m and its CMC was 400- 500mg respectively, it has shown maximum emulsification index of 94% for soyabean oil. The presence of glycolipid moiety in the recovery biosurfactant was elucidated by IR and NMR spectroscopic studies.   Keywords: Factorial design, organic solvent, CMC, Emulsification index

  3. HiPER Tritium factory elements

    Science.gov (United States)

    Guillaume, Didier

    2011-06-01

    HiPER will include a Tritium target factory. This presentation is an overview. We start from process ideas to go to first sketch passing through safety principles. We will follow the Tritium management process. We need first a gas factory producing the right gas mixture from hydrogen, Deuterium and Tritium storage. Then we could pass through the target factory. It is based on our LMJ single shot experiment and some new development like the injector. Then comes pellet burst and vapour recovery. The Tritium factory has to include the waste recovery, recycling process with gas purification before storage. At least, a nuclear plant is not a classical building. Tritium is also very special... All the design ideas have to be adapted. Many facilities are necessary, some with redundancy. We all have to well known these constraints. Tritium budget will be a major contributor for a material point of view as for a financial one.

  4. Super Factories

    Indian Academy of Sciences (India)

    D G Hitlin

    2006-11-01

    Heavy-flavor physics, in particular and physics results from the factories, currently provides strong constraints on models of physics beyond the Standard Model. A new generation of colliders, Super Factories, with 50 to 100 times the luminosity of existing colliders, can, in a dialog with LHC and ILC, provide unique clarification of new physics phenomena seen at those machines.

  5. Transcription factories

    Science.gov (United States)

    Rieder, Dietmar; Trajanoski, Zlatko; McNally, James G.

    2012-01-01

    There is considerable evidence that transcription does not occur homogeneously or diffusely throughout the nucleus, but rather at a number of specialized, discrete sites termed transcription factories. The factories are composed of ~4–30 RNA polymerase molecules, and are associated with many other molecules involved in transcriptional activation and mRNA processing. Some data suggest that the polymerase molecules within a factory remain stationary relative to the transcribed DNA, which is thought to be reeled through the factory site. There is also some evidence that transcription factories could help organize chromatin and nuclear structure, contributing to both the formation of chromatin loops and the clustering of active and co-regulated genes. PMID:23109938

  6. Design analysis for grounding experiments

    NARCIS (Netherlands)

    Lemmen, P.P.M.; Vredeveldt, A.W.; Pinkster, J.A.

    1996-01-01

    In 1995 a series of six grounding experiments has been carried out with a 600 Tonne inland water way tanker. At the how of the vessel test sections could be fitted, which were run into an artificial rock. The design of the support structures for the test sections and for the rock required the predic

  7. Evaluation of biomass production, carotenoid level and antioxidant capacity produced by Thermus filiformis Using fractional factorial design

    Science.gov (United States)

    Mandelli, Fernanda; Yamashita, Fábio; Pereira, José L.; Mercadante, Adriana Z.

    2012-01-01

    A fractional factorial design 25–1 was used to evaluate the effect of temperature, pH, and concentrations of yeast extract, tryptone and Nitsch’s trace elements on the biomass, total carotenoids and protection against singlet oxygen by carotenoid extracts of the bacterium Thermus filiformis. In addition, the carotenoid composition was determined by high-performance liquid chromatography connected to a diode array and mass spectrometer detectors (HPLC-DAD-MS/MS). The production of biomass ranged from 0.113 to 0.658 g/L, the total carotenoid from 137.6 to 1,517.4 µg/g and the protection against singlet oxygen from 4.3 to 85.1 %. Results of the fractional factorial design showed that temperature had a negative effect on biomass production and a positive effect on carotenoid content and protection against singlet oxygen, besides, high levels of pH value, concentrations of yeast extract and tryptone had a positive effect on biomass production only at lower temperatures. The main carotenoids of T. filiformis were thermozeaxanthins. In the tested conditions, changes in the levels of the variables influenced the biomass, carotenoid production, and protection against singlet oxygen, although they did not influence the carotenoid profile. The results of this study provide a better understanding on the interactions among certain nutritional and cultivation conditions of a thermophile bacterium, Thermus filiformis, on biomass and carotenoid amounts, as well as on the antioxidant capacity. PMID:24031811

  8. Evaluation of biomass production, carotenoid level and antioxidant capacity produced by Thermus filiformis using fractional factorial design

    Directory of Open Access Journals (Sweden)

    Fernanda Mandelli

    2012-03-01

    Full Text Available A fractional factorial design 2(5-1 was used to evaluate the effect of temperature, pH, and concentrations of yeast extract, tryptone and Nitsch's trace elements on the biomass, total carotenoids and protection against singlet oxygen by carotenoid extracts of the bacterium Thermus filiformis. In addition, the carotenoid composition was determined by high-performance liquid chromatography connected to a diode array and mass spectrometer detectors (HPLC-DAD-MS/MS. The production of biomass ranged from 0.113 to 0.658 g/L, the total carotenoid from 137.6 to 1,517.4 mg/g and the protection against singlet oxygen from 4.3 to 85.1 %. Results of the fractional factorial design showed that temperature had a negative effect on biomass production and a positive effect on carotenoid content and protection against singlet oxygen, besides, high levels of pH value, concentrations of yeast extract and tryptone had a positive effect on biomass production only at lower temperatures. The main carotenoids of T. filiformis were thermozeaxanthins. In the tested conditions, changes in the levels of the variables influenced the biomass, carotenoid production, and protection against singlet oxygen, although they did not influence the carotenoid profile. The results of this study provide a better understanding on the interactions among certain nutritional and cultivation conditions of a thermophile bacterium, Thermus filiformis, on biomass and carotenoid amounts, as well as on the antioxidant capacity.

  9. Application of full 42 Factorial Design for the Development and Characterization of Insecticidal Soap from Neem Oil

    Directory of Open Access Journals (Sweden)

    A. S. KOVO

    2006-01-01

    Full Text Available The aim of this paper was to investigate the extraction, characterization and production of insecticidal soap from Neem oil using full 42 factorial design. Soxhlet extractor was used for the extraction purpose and two solvent was chosen to determine which is better. N-hexane gives a Neem oil yield of 45.43% while ethanol gives a yield of 46.38%, confirming the earlier literature result giving ethanol as better solvent for Neem oil extraction. The basic properties of the oil were determined as follows, saponification value 215.95ml/g, acid value 1.122g/mol, unsaponifiable matter 19.66 etc. The Neem oil was found to have a colour of golden yellow due to the presence of Nimbidin.Full 42 factorial design and mathematical model was applied to the extraction process and a first order regression equation of the form:Y = 9.548 + 0.144X1 + 0.1931X2 + 0.1892 X12was obtained growing the individual effect of time and solvent type as parameter and their interaction in the entire extraction process the Neem insecticidal soap was found to be effective in insect and pest control.

  10. Abstract Factory Design Pattern in the Application of MIS%抽象工厂设计模式在MIS中的应用

    Institute of Scientific and Technical Information of China (English)

    贾延明; 张永涛

    2011-01-01

    This article from the design pattern, analyzed the abstract factory pattern (Abstract Factory Pattern), the abstract factory design pattern in a hierarchy application of distributed systems, and abstract factory design pattern to management information system (MIS). Abstract factory pattern for the system architecture provides a very flexible and powerful dynamic extension mechanism, to reduce the coupling between modules, better implementation of software reuse.%本文从设计模式出发,分析了抽象工厂模式(Abstract Factory Pattern)的优缺点,研究了抽象工厂设计模式在分层分布式系统中的应用,并将抽象工厂设计模式应用于管理信息系统(MIS)中.抽象工厂模式为系统结构提供了非常灵活强大的动态扩展机制,能够降低模块间的耦合性,更好的实现软件复用.

  11. Factorial experimental design of winery wastewaters treatment by heterogeneous photo-Fenton process.

    Science.gov (United States)

    Mosteo, Rosa; Ormad, Peña; Mozas, Engracia; Sarasa, Judith; Ovelleiro, José Luis

    2006-05-01

    Winery wastewaters are difficult to treat by conventional biological processes because they are seasonal and experience a substantial flow variations. Photocatalytic advanced oxidation is a promising technology for wastewaters containing high amounts of organic matter. In this work, the photo-Fenton process in heterogeneous phase is presented as an alternative methodology for the treatment of winery wastewaters. As a consequence of the great number of existing variables, an experimental design methodology has been used in order to study the influence and interaction of various variables and to obtain a reduced empirical model which describes the organic matter degradation process. Applying photo-Fenton treatment in heterogeneous phase under energetic conditions for synthetic samples simulating winery wastewaters results in purification levels of up to 50% (measured as total organic carbon). Different reduced models are obtained and their utilization depends mainly on the degree of degradation of organic matter required.

  12. Optimizing flurbiprofen-loaded NLC by central composite factorial design for ocular delivery

    Science.gov (United States)

    Gonzalez-Mira, E.; Egea, M. A.; Souto, E. B.; Calpena, A. C.; García, M. L.

    2011-01-01

    The purpose of this study was to design and optimize a new topical delivery system for ocular administration of flurbiprofen (FB), based on lipid nanoparticles. These particles, called nanostructured lipid carriers (NLC), were composed of a fatty acid (stearic acid (SA)) as the solid lipid and a mixture of Miglyol® 812 and castor oil (CO) as the liquid lipids, prepared by the hot high pressure homogenization method. After selecting the critical variables influencing the physicochemical characteristics of the NLC (the liquid lipid (i.e. oil) concentration with respect to the total lipid (cOil/L (wt%)), the surfactant and the flurbiprofen concentration, on particle size, polydispersity index and encapsulation efficiency), a three-factor five-level central rotatable composite design was employed to plan and perform the experiments. Morphological examination, crystallinity and stability studies were also performed to accomplish the optimization study. The results showed that increasing cOil/L (wt%) was followed by an enhanced tendency to produce smaller particles, but the liquid to solid lipid proportion should not exceed 30 wt% due to destabilization problems. Therefore, a 70:30 ratio of SA to oil (miglyol + CO) was selected to develop an optimal NLC formulation. The smaller particles obtained when increasing surfactant concentration led to the selection of 3.2 wt% of Tween® 80 (non-ionic surfactant). The positive effect of the increase in FB concentration on the encapsulation efficiency (EE) and its total solubilization in the lipid matrix led to the selection of 0.25 wt% of FB in the formulation. The optimal NLC showed an appropriate average size for ophthalmic administration (228.3 nm) with a narrow size distribution (0.156), negatively charged surface (-33.3 mV) and high EE (~90%). The in vitro experiments proved that sustained release FB was achieved using NLC as drug carriers. Optimal NLC formulation did not show toxicity on ocular tissues.

  13. Optimizing flurbiprofen-loaded NLC by central composite factorial design for ocular delivery

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez-Mira, E; Egea, M A; Garcia, M L [Department of Physical Chemistry, Faculty of Pharmacy, Institute of Nanoscience and Nanotechnology, University of Barcelona, Avenida Joan XXIII s/n, E-08028 Barcelona (Spain); Souto, E B [Faculty of Health Sciences, Fernando Pessoa University, Rua Carlos da Maia, Nr. 296, Office S.1, P-4200-150 Porto (Portugal); Calpena, A C, E-mail: eligonzalezmi@ub.edu [Department of Biopharmacy and Pharmaceutical Technology, Faculty of Pharmacy, University of Barcelona, Avenida Joan XXIII s/n, E-08028 Barcelona (Spain)

    2011-01-28

    The purpose of this study was to design and optimize a new topical delivery system for ocular administration of flurbiprofen (FB), based on lipid nanoparticles. These particles, called nanostructured lipid carriers (NLC), were composed of a fatty acid (stearic acid (SA)) as the solid lipid and a mixture of Miglyol 812 and castor oil (CO) as the liquid lipids, prepared by the hot high pressure homogenization method. After selecting the critical variables influencing the physicochemical characteristics of the NLC (the liquid lipid (i.e. oil) concentration with respect to the total lipid (cOil/L (wt%)), the surfactant and the flurbiprofen concentration, on particle size, polydispersity index and encapsulation efficiency), a three-factor five-level central rotatable composite design was employed to plan and perform the experiments. Morphological examination, crystallinity and stability studies were also performed to accomplish the optimization study. The results showed that increasing cOil/L (wt%) was followed by an enhanced tendency to produce smaller particles, but the liquid to solid lipid proportion should not exceed 30 wt% due to destabilization problems. Therefore, a 70:30 ratio of SA to oil (miglyol + CO) was selected to develop an optimal NLC formulation. The smaller particles obtained when increasing surfactant concentration led to the selection of 3.2 wt% of Tween 80 (non-ionic surfactant). The positive effect of the increase in FB concentration on the encapsulation efficiency (EE) and its total solubilization in the lipid matrix led to the selection of 0.25 wt% of FB in the formulation. The optimal NLC showed an appropriate average size for ophthalmic administration (228.3 nm) with a narrow size distribution (0.156), negatively charged surface (-33.3 mV) and high EE ({approx}90%). The in vitro experiments proved that sustained release FB was achieved using NLC as drug carriers. Optimal NLC formulation did not show toxicity on ocular tissues.

  14. Thermodynamics-based design of microbial cell factories for anaerobic product formation.

    Science.gov (United States)

    Cueto-Rojas, Hugo F; van Maris, A J A; Wahl, S Aljoscha; Heijnen, J J

    2015-09-01

    The field of metabolic engineering has delivered new microbial cell factories and processes for the production of different compounds including biofuels, (di)carboxylic acids, alcohols, and amino acids. Most of these processes are aerobic, with few exceptions (e.g., alcoholic fermentation), and attention is focused on assembling a high-flux product pathway with a production limit usually set by the oxygen transfer rate. By contrast, anaerobic product synthesis offers significant benefits compared to aerobic systems: higher yields, less heat generation, reduced biomass production, and lower mechanical energy input, which can significantly reduce production costs. Using simple thermodynamic calculations, we demonstrate that many products can theoretically be produced under anaerobic conditions using several conventional and non-conventional substrates.

  15. Evaluation of significant manufacturing parameters in lost foam casting of thin-wall Al-Si-Cu alloy using full factorial design of experiment%影响消失模铸造Al-Si-Cu合金薄壁铸件质量的显著性工艺参数

    Institute of Scientific and Technical Information of China (English)

    Hassan JAFARI; Mohd Hsbullah IDRIS; Amirreza SHAYGANPOUR

    2013-01-01

    通过控制消失模铸造工艺参数可以制备出无缺陷的形状复杂的铸件产品。对 Al−Si−Cu 合金消失模铸造进行研究,考察浇注温度、涂料黏度、振动时间、型砂粒径以及它们之间的交互作用对铸件表面质量、孔隙率和共晶硅间距的影响。采用两水平全因子实验设计方法考察影响铸件性能的显著性影响工艺参数。结果表明,浇注温度和振动时间对铸件共晶硅间距和孔隙率的影响最明显。在细型砂模和较高的浇注温度下,铸件的表面质量几乎保持稳定不变,而在粗型砂模下铸件的表面质量较低。涂料黏度对铸件性能没有显著影响。%Controlling process parameters of lost foam casting (LFC) enables this process to produce defect-free complex shape castings. An experimental investigation on lost foam casting of an Al−Si−Cu cast alloy was carried out. The effects of pouring temperature, slurry viscosity, vibration time and sand size on surface finish, shrinkage porosity and eutectic silicon spacing of thin-wall casting were investigated. A full two-level factorial design of experimental technique was used to identify the significant manufacturing factors affecting the properties of casting. Pouring temperature was found as the most significant factor affecting Al−Si−Cu lost foam casting quality. It was shown that flask vibration time interacted with pouring temperature influenced eutectic silicon spacing and porosity percentage significantly. The results also revealed that the surface quality of the samples cast in fine sand moulds at higher pouring temperatures was almost unchanged, while those cast in coarse sand moulds possessed lower surface qualities. Furthermore, variation in slurry viscosity showed no significant effect on the evaluated properties compared to other parameters.

  16. Study of castor oil polyurethane - poly(methyl methacrylate semi-interpenetrating polymer network (SIPN reaction parameters using a 2³ factorial experimental design

    Directory of Open Access Journals (Sweden)

    Fernanda Oliveira Vieira da Cunha

    2004-12-01

    Full Text Available In this work was employed a 2³ factorial experiment design to evaluate the castor oil polyurethane-poly(methyl methacrylate semi-IPN synthesis. The reaction parameters used as independent variables were NCO/OH molar ratio, polyurethane polymerization time and methyl methacrylate (MMA content. The semi-IPNs were cured over 28 h using two thermal treatments. The polymers were characterized by infrared and Raman spectroscopy, thermal analysis and swelling profiles in n-hexane. The glass transition temperature (Tg and the swelling were more affect by the NCO/OH molar ratio variation. The semi-IPNs showed Tg from - 27 to - 6 °C and the swelling range was from 3 to 22%, according to the crosslink density. The IPN mechanical properties were dependent on the cure temperature and MMA content in it. Lower elastic modulus values were observed in IPNs cured at room temperature.

  17. Process of chemical recycling of post-consumer PET using a factorial design; Processo de reciclagem quimica do PET pos-consumo empregando o planejamento fatorial

    Energy Technology Data Exchange (ETDEWEB)

    Lacerda, Carlos Eduardo de O.; Almeida, Yeda Medeiros B. de; Vinhas, Gloria M., E-mail: carlos.olacerda@hotmail.com [Universidade Federal de Pernambuco (UFPE), Recife, PE (Brazil)

    2013-07-01

    The present study investigated important variables in the depolymerization reaction of post-consumer poly (ethylene terephthalate) - PET via alkaline hydrolysis. Through this reaction is obtained terephthalic acid (PTA), a monomer, which when purified, is used for the production of PET resin. The study was based on a 2{sup 2} factorial design in which the independent variables were the concentration of NaOH solution and the reaction time, and the dependent variable was the yield of PTA obtained. The experiments that generated the best results, 100 % of yield, were obtained with the higher values of the independent variables. Statistical analysis showed that the concentration of NaOH solution is the variable that most influences in the process. The PTA obtained was analyzed by NMR ¹H technique, confirming the strong resemblance to commercial PTA obtained by petrochemical way. (author)

  18. Experience-Centered Design Designers, Users, and Communities in Dialogue

    CERN Document Server

    Wright, Peter

    2010-01-01

    Experience-centered design, experience-based design, experience design, designing for experience, user experience design. All of these terms have emerged and gained acceptance in the Human-Computer Interaction (HCI) and Interaction Design relatively recently. In this book, we set out our understanding of experience-centered design as a humanistic approach to designing digital technologies and media that enhance lived experience. The book is divided into three sections. In Section 1, we outline the historical origins and basic concepts that led into and flow out from our understanding of experi

  19. Design of Multiphase Flow Experiments

    Energy Technology Data Exchange (ETDEWEB)

    Urkedal, Hege

    1998-12-31

    This thesis proposes an experimental design procedure for multiphase experiments. The two-phase functions can be determined using data from a single experiment, while the three-phase relative permeabilities must be determined using data from multiple experiments. Various three-phase experimental designs have been investigated and the accuracy with which the flow functions may be determined using the corresponding data have been computed. Analytical sensitivity coefficients were developed from two-phase to three-phase flow. Sensitivity coefficients are the derivative of the model output with respect to the model parameters. They are obtained by a direct method that takes advantage of the fact that the model equations are solved using the Newton-Raphson method, and some of the results from this solution can be used directly when solving the sensitivity equation. Numerical derivatives are avoided, which improves accuracy. The thesis uses an inverse methodology for determination of two- and three-phase relative permeability and capillary pressure functions. The main work has been the development of analytical sensitivity coefficients for two-and three-phase flow. This technical contribution has improved the accuracy both in parameter estimation and accuracy assessment of the estimates and reduced the computer time requirements. The proposed experimental design is also dependent on accurate sensitivity coefficients to give the right guidelines for how two- and three-phase experiments should be conducted. Following the proposed experimental design, three-phase relative permeability and capillary pressure functions have been estimated when multiple sets of experimental data have been reconciled by simulations. 74 refs., 69 figs., 18 tabs.

  20. Internet factories

    NARCIS (Netherlands)

    Strijkers, R.J.

    2014-01-01

    This thesis contributes a novel concept for introducing new network technologies in network infrastructures. The concept, called Internet factories, describes the methodical process to create and manage application-specific networks from application programs, referred to as Netapps. An Internet

  1. Internet Factories

    NARCIS (Netherlands)

    Strijkers, R.J.

    2014-01-01

    This thesis contributes a novel concept for introducing new network technologies in network infrastructures. The concept, called Internet factories, describes the methodical process to create and manage application-specific networks from application programs, referred to as Netapps. An Internet

  2. Follow-up Designs to Resolve Confounding in Split-Plot Experiments

    DEFF Research Database (Denmark)

    Almimi, Ashraf A.; Kulahci, Murat; Montgomery, Douglas C.

    2008-01-01

    Split-plot designs are effective in industry due to time and/or cost constraints, restriction on randomization of the treatment combinations of the hard-to-change factors, and different sizes of experimental units. Some of the results of fractional factorial split-plot experiments can be ambiguou...

  3. Follow-up Designs to Resolve Confounding in Split-Plot Experiments

    DEFF Research Database (Denmark)

    Almimi, Ashraf A.; Kulahci, Murat; Montgomery, Douglas C.

    2008-01-01

    Split-plot designs are effective in industry due to time and/or cost constraints, restriction on randomization of the treatment combinations of the hard-to-change factors, and different sizes of experimental units. Some of the results of fractional factorial split-plot experiments can be ambiguou...

  4. A CASE STUDY IN THE APPLICATION OF SUPERSATURATED DESIGNS TO COMPUTER EXPERIMENTS

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Supersaturated design is essentially a fractional factorial design in which the number of potential effects is greater than the number of runs. In this article, the supersaturated design is applied to a computer experiment through an example of steady current circuit model problem. A uniform mixed-level supersaturated design and the centered quadratic regression model are used. This example shows that supersaturated design and quadratic regression modeling method are very effective for screening effects and building the predictor. They are not only useful in computer experiments but also in industrial and other scientific experiments.

  5. The preparation and evaluation of sustained release suppositories containing ketoprofen and Eudragit RL 100 by using factorial design.

    Science.gov (United States)

    Ozgüney, I; Ozcan, I; Ertan, G; Güneri, T

    2007-01-01

    The preparation of ketoprofen (KP) sustained release (SR) suppositories was designed according to the 3(2) x 2(1) factorial design as three different KP:Eudragit RL 100 ratios (1:0.5, 1:1, 1:2), three particle sizes of prepared granules (250-500, 500-710, and 710-1000 microm) and two different PEG 400:PEG 6000 ratios (40:60, 50:50). The conventional KP suppositories were also prepared by using Witepsol H 15, Massa Estarinum B, Cremao and the mixture of PEG 400:PEG 6000. The dissolution studies of suppositories prepared were carried out according to the USP XXIII basket method in the phosphate buffer (pH = 7.2) at 50 rpm, and it was shown that the dissolution time was sustained up to 8 hours. According to the results of the factorial design, the most important independent variable on t50 and t80 was drug:polymer ratios. The log of partition coefficient of KP was determined as 1.46, showing the high affinity to the oily phase. n exponent and kinetic studies were conducted to explain diffusion mechanism, and it is understood that if the inert KP:Eudragit RL 100 ratio is increased in the particles, the Fickian difusion dominates and the best kinetic turns to Higuchi from the Hixson-Crowell. There is neither crystalline form of KP nor degradation product in the suppositories detected with the differential scanning calorimetry (DSC) studies. In addition to these studies, antiinflammatory activity of SR suppositories also determined that it was significantly extended according to the conventional suppositories.

  6. Polymeric nanoparticles loaded with the 3,5,3´-triiodothyroacetic acid (Triac, a thyroid hormone: factorial design, characterization, and release kinetics

    Directory of Open Access Journals (Sweden)

    dos Santos KC

    2012-07-01

    in delivering Triac for thyroid treatment.Keywords: Triac, nanoparticles, optimization, factorial design of experiments, HPLC analytical method

  7. Designing Effective Undergraduate Research Experiences

    Science.gov (United States)

    Severson, S.

    2010-12-01

    I present a model for designing student research internships that is informed by the best practices of the Center for Adaptive Optics (CfAO) Professional Development Program. The dual strands of the CfAO education program include: the preparation of early-career scientists and engineers in effective teaching; and changing the learning experiences of students (e.g., undergraduate interns) through inquiry-based "teaching laboratories." This paper will focus on the carry-over of these ideas into the design of laboratory research internships such as the CfAO Mainland internship program as well as NSF REU (Research Experiences for Undergraduates) and senior-thesis or "capstone" research programs. Key ideas in maximizing student learning outcomes and generating productive research during internships include: defining explicit content, scientific process, and attitudinal goals for the project; assessment of student prior knowledge and experience, then following up with formative assessment throughout the project; setting reasonable goals with timetables and addressing motivation; and giving students ownership of the research by implementing aspects of the inquiry process within the internship.

  8. Use of fractional factorial design for selection of nutrients for culturing Paecilomyces variotii in eucalyptus hemicellulosic hydrolysate

    Directory of Open Access Journals (Sweden)

    J.B. Almeida e Silva

    1998-09-01

    Full Text Available A eucalyptus hemicellulose fraction was hydrolysed by treating eucalyptus wood chips with sulfuric acid. The hydrolysate was used as the substrate to grow Paecilomyces variotii IOC-3764 cultured for 72 or 96 hours. The influence of the inhibitors, nutrients and fermentation time was verified by a 28-4 and, subsequently, a 25-1 fractional factorial design. The effects of the inhibitors (acetic acid and furfural, nutrients (rice bran, urea, potassium nitrate, ammonium sulfate, magnesium sulfate and sodium phosphate and fermentation time were investigated. The highest yield (10.59 g/L of biomass was obtained when the microorganisms were cultivated for 72 hours in a medium composed of 30 g/L rice bran, 9.4 g/L ammonium sulfate (2 g/L nitrogen and 2 g/L sodium phosphate.

  9. Factorial experimental design for the culture of human embryonic stem cells as aggregates in stirred suspension bioreactors reveals the potential for interaction effects between bioprocess parameters.

    Science.gov (United States)

    Hunt, Megan M; Meng, Guoliang; Rancourt, Derrick E; Gates, Ian D; Kallos, Michael S

    2014-01-01

    Traditional optimization of culture parameters for the large-scale culture of human embryonic stem cells (ESCs) as aggregates is carried out in a stepwise manner whereby the effect of varying each culture parameter is investigated individually. However, as evidenced by the wide range of published protocols and culture performance indicators (growth rates, pluripotency marker expression, etc.), there is a lack of systematic investigation into the true effect of varying culture parameters especially with respect to potential interactions between culture variables. Here we describe the design and execution of a two-parameter, three-level (3(2)) factorial experiment resulting in nine conditions that were run in duplicate 125-mL stirred suspension bioreactors. The two parameters investigated here were inoculation density and agitation rate, which are easily controlled, but currently, poorly characterized. Cell readouts analyzed included fold expansion, maximum density, and exponential growth rate. Our results reveal that the choice of best case culture parameters was dependent on which cell property was chosen as the primary output variable. Subsequent statistical analyses via two-way analysis of variance indicated significant interaction effects between inoculation density and agitation rate specifically in the case of exponential growth rates. Results indicate that stepwise optimization has the potential to miss out on the true optimal case. In addition, choosing an optimum condition for a culture output of interest from the factorial design yielded similar results when repeated with the same cell line indicating reproducibility. We finally validated that human ESCs remain pluripotent in suspension culture as aggregates under our optimal conditions and maintain their differentiation capabilities as well as a stable karyotype and strong expression levels of specific human ESC markers over several passages in suspension bioreactors.

  10. Custom fractional factorial designs to develop atorvastatin self-nanoemulsifying and nanosuspension delivery systems – enhancement of oral bioavailability

    Directory of Open Access Journals (Sweden)

    Hashem FM

    2015-06-01

    Full Text Available Fahima M Hashem,1 Majid M Al-Sawahli,2 Mohamed Nasr,1 Osama AA Ahmed3,4 1Department of Pharmaceutics and Industrial Pharmacy, Faculty of Pharmacy, Helwan University, Cairo, Egypt; 2Holding Company for Biological Products and Vaccines (VACSERA, Giza, Egypt; 3Department of Pharmaceutics and Industrial Pharmacy, Faculty of Pharmacy, King Abdulaziz University, Jeddah, Saudi Arabia; 4Department of Pharmaceutics and Industrial Pharmacy, Faculty of Pharmacy, Minia University, Minia, Egypt Abstract: Poor water solubility of a drug is a major challenge in drug delivery research and a main cause for limited bioavailability and pharmacokinetic parameters. This work aims to utilize custom fractional factorial design to assess the development of self-nanoemulsifying drug delivery systems (SNEDDS and solid nanosuspensions (NS in order to enhance the oral delivery of atorvastatin (ATR. According to the design, 14 experimental runs of ATR SNEDDS were formulated utilizing the highly ATR solubilizing SNEDDS components: oleic acid, Tween 80, and propylene glycol. In addition, 12 runs of NS were formulated by the antisolvent precipitation–ultrasonication method. Optimized formulations of SNEDDS and solid NS, deduced from the design, were characterized. Optimized SNEDDS formula exhibited mean globule size of 73.5 nm, zeta potential magnitude of -24.1 mV, and 13.5 µs/cm of electrical conductivity. Optimized solid NS formula exhibited mean particle size of 260.3 nm, 7.4 mV of zeta potential, and 93.2% of yield percentage. Transmission electron microscopy showed SNEDDS droplets formula as discrete spheres. The solid NS morphology showed flaky nanoparticles with irregular shapes using scanning electron microscopy. The release behavior of the optimized SNEDDS formula showed 56.78% of cumulative ATR release after 10 minutes. Solid NS formula showed lower rate of release in the first 30 minutes. Bioavailability estimation in Wistar albino rats revealed an augmentation

  11. Smart Factory

    DEFF Research Database (Denmark)

    Bilberg, Arne; Radziwon, Agnieszka; Grube Hansen, David

    2017-01-01

    , and to target their challenges and ensure sustainable growth and business in these enterprises. Therefore the focus of the Smart Factory project was to support the growth and sustainable development of the small and medium sized manufacturing industry in Denmark. The project focused on SMEs and how to improve...... their innovation and competitive advantage by focusing at their competences, strengths and opportunities. The project suggests innovative solutions and business models through collaboration and use of new technologies. In the Smart Factory, SMEs should be able to collaborate on new products, markets and production...... or supply chains in a creative organization. The Smart factory is supposed to be organic, meaning it is able to reconfigure and adjust to new projects and customers and has to be seen and taken as a model for inspiration to manufacturing businesses in general. The project takes into consideration Danish...

  12. Optimization of parameters for the quantitative surface-enhanced Raman scattering detection of mephedrone using a fractional factorial design and a portable Raman spectrometer.

    Science.gov (United States)

    Mabbott, Samuel; Correa, Elon; Cowcher, David P; Allwood, J William; Goodacre, Royston

    2013-01-15

    A new optimization strategy for the SERS detection of mephedrone using a portable Raman system has been developed. A fractional factorial design was employed, and the number of statistically significant experiments (288) was greatly reduced from the actual total number of experiments (1722), which minimized the workload while maintaining the statistical integrity of the results. A number of conditions were explored in relation to mephedrone SERS signal optimization including the type of nanoparticle, pH, and aggregating agents (salts). Through exercising this design, it was possible to derive the significance of each of the individual variables, and we discovered four optimized SERS protocols for which the reproducibility of the SERS signal and the limit of detection (LOD) of mephedrone were established. Using traditional nanoparticles with a combination of salts and pHs, it was shown that the relative standard deviations of mephedrone-specific Raman peaks were as low as 0.51%, and the LOD was estimated to be around 1.6 μg/mL (9.06 × 10(-6) M), a detection limit well beyond the scope of conventional Raman and extremely low for an analytical method optimized for quick and uncomplicated in-field use.

  13. A Comprehensive Guide to Factorial Two-Level Experimentation

    CERN Document Server

    Mee, Robert

    2009-01-01

    Statistical design of experiments is useful in virtually every quantitative field. This book focuses on two-level factorial designs that provide efficient plans for exploring the effects of many factors at once. It is suitable for engineers, physical scientists, and those who conduct experiments.

  14. Higgs Factory Concepts

    CERN Document Server

    Zimmermann, Frank

    2016-01-01

    Designs for future high-energy circular electron-positron colliders are based on both established and novel concepts. An appropriate design will enable these facilities to serve not only as “Higgs factories”, but also as Z, W and top factories, and, in addition, to become a possible first step to a higher-energy hadron collider.

  15. Social Design Experiments: Toward Equity by Design

    Science.gov (United States)

    Gutiérrez, Kris D.; Jurow, A. Susan

    2016-01-01

    In this article, we advance an approach to design research that is organized around a commitment to transforming the educational and social circumstances of members of non-dominant communities as a means of promoting social equity and learning. We refer to this approach as social design experimentation. The goals of social design experiments…

  16. A Randomized Longitudinal Factorial Design to Assess Malaria Vector Control and Disease Management Interventions in Rural Tanzania

    Directory of Open Access Journals (Sweden)

    Randall A. Kramer

    2014-05-01

    Full Text Available The optimization of malaria control strategies is complicated by constraints posed by local health systems, infrastructure, limited resources, and the complex interactions between infection, disease, and treatment. The purpose of this paper is to describe the protocol of a randomized factorial study designed to address this research gap. This project will evaluate two malaria control interventions in Mvomero District, Tanzania: (1 a disease management strategy involving early detection and treatment by community health workers using rapid diagnostic technology; and (2 vector control through community-supported larviciding. Six study villages were assigned to each of four groups (control, early detection and treatment, larviciding, and early detection and treatment plus larviciding. The primary endpoint of interest was change in malaria infection prevalence across the intervention groups measured during annual longitudinal cross-sectional surveys. Recurring entomological surveying, household surveying, and focus group discussions will provide additional valuable insights. At baseline, 962 households across all 24 villages participated in a household survey; 2,884 members from 720 of these households participated in subsequent malariometric surveying. The study design will allow us to estimate the effect sizes of different intervention mixtures. Careful documentation of our study protocol may also serve other researchers designing field-based intervention trials.

  17. A randomized longitudinal factorial design to assess malaria vector control and disease management interventions in rural Tanzania.

    Science.gov (United States)

    Kramer, Randall A; Mboera, Leonard E G; Senkoro, Kesheni; Lesser, Adriane; Shayo, Elizabeth H; Paul, Christopher J; Miranda, Marie Lynn

    2014-05-16

    The optimization of malaria control strategies is complicated by constraints posed by local health systems, infrastructure, limited resources, and the complex interactions between infection, disease, and treatment. The purpose of this paper is to describe the protocol of a randomized factorial study designed to address this research gap. This project will evaluate two malaria control interventions in Mvomero District, Tanzania: (1) a disease management strategy involving early detection and treatment by community health workers using rapid diagnostic technology; and (2) vector control through community-supported larviciding. Six study villages were assigned to each of four groups (control, early detection and treatment, larviciding, and early detection and treatment plus larviciding). The primary endpoint of interest was change in malaria infection prevalence across the intervention groups measured during annual longitudinal cross-sectional surveys. Recurring entomological surveying, household surveying, and focus group discussions will provide additional valuable insights. At baseline, 962 households across all 24 villages participated in a household survey; 2,884 members from 720 of these households participated in subsequent malariometric surveying. The study design will allow us to estimate the effect sizes of different intervention mixtures. Careful documentation of our study protocol may also serve other researchers designing field-based intervention trials.

  18. The PEP-II Asymmetric B Factory: Design details and R&D results

    Energy Technology Data Exchange (ETDEWEB)

    Bloom, E.; DeStaebler, H.; Dorfan, J. [Stanford Linear Accelerator Center, Menlo Park, CA (United States)] [and others

    1994-06-01

    PEP-II, a 9 GeV {times} 3.1 GeV electron-positron collider with a design luminosity of 3 {times} 10{sup 33} cm{sup {minus}2}s{sup {minus}1} has now been approved for construction by SLAC, LBL and LLNL for the purpose of studying CP violation in the B{bar B} system. This upgrade project involves replacing the vacuum and RF systeum of PEP, which will serve as the high-energy ring (HER), along with the addition of a new low-energy ring (LER) mounted atop the HER. Designs for both rings are described, and the anticipated project construction schedule is indicated. Collider operation will begin at the end of 1998. An aggressive R&D program has been carried out to validate our design choices; key results in the areas of lattice design, vacuum, RF, and multibunch feedback are summarized.

  19. Factorial design for the evaluation of the interaction effect between particle size and heating rate in the kinetic energy of coal combustion

    Energy Technology Data Exchange (ETDEWEB)

    Avila, Ivonete; Silva, Eugenio A.G.; Mortari, Daniela A.; Crnkovic, Paula M.; Milioli, Fernando E. [University of Sao Paulo (EESC/USP), Sao Carlos, SP (Brazil). Engineering School. Group of Thermal and Fluids Engineering], Emails: iavila@sc.usp.br, eugenio.silva@usp.br, paulam@sc.usp.br, milioli@sc.usp.br

    2010-07-01

    This paper evaluates the behavior of kinetic energy for different heating rates ({alpha}) and particle sizes of the material in the study of the coal combustion process. It aims to obtain a response surface in a large range of particle size, using heating rates between the minimum and maximum values allowed by the equipment. Therefore it searches for a model to evaluate the interaction effect between particle size and the heating rate and to predict the activation energy of the process studied. The activation energy of the process was determined using the isoconversional model Model Free Kinetics. In this model, the activation energy (E{sub {alpha}}) is obtained as a function of the reaction extent ({alpha}). The subscript in E{sub {alpha}} designates the values related to a given value of conversion ({alpha}). All experiments were conducted in thermogravimetric balance using samples of a Brazilian coal (EC4500) witch average particle size between 163 to 650 {mu}m and heating rates between 10 and 40 deg C min{sup -1} in dynamic atmosphere of air. A central rotatable composite design was applied for the 2{sup 2} factorial design including 4 tests under the axial conditions and 3 repetitions in the central point. As expected, the results show that both the particle size and the heating rate affected significantly the values of activation energy of the coal combustion process obtained by the model used. (author)

  20. The experience factory: Can it make you a 5? or what is its relationship to other quality and improvement concepts?

    Science.gov (United States)

    Basili, Victor R.

    1992-01-01

    The concepts of quality improvements have permeated many businesses. It is clear that the nineties will be the quality era for software and there is a growing need to develop or adapt quality improvement approaches to the software business. Thus we must understand software as an artifact and software as a business. Since the business we are dealing with is software, we must understand the nature of software and software development. The software discipline is evolutionary and experimental; it is a laboratory science. Software is development not production. The technologies of the discipline are human based. There is a lack of models that allow us to reason about the process and the product. All software is not the same; process is a variable, goals are variable, etc. Packaged, reusable, experiences require additional resources in the form of organization, processes, people, etc. There have been a variety of organizational frameworks proposed to improve quality for various businesses. The ones discussed in this presentation include: Plan-Do-Check-Act, a quality improvement process based upon a feedback cycle for optimizing a single process model/production line; the Experience Factory/Quality Improvement Paradigm, continuous improvements through the experimentation, packaging, and reuse of experiences based upon a business's needs; Total Quality Management, a management approach to long term success through customer satisfaction based on the participation of all members of an organization; the SEI capability maturity model, a staged process improvement based upon assessment with regard to a set of key process areas until you reach a level 5 which represents a continuous process improvement; and Lean (software) Development, a principle supporting the concentration of the production on 'value added' activities and the elimination of reduction of 'not value added' activities.

  1. A New Interaction Region Design for the Super-B Factory

    Energy Technology Data Exchange (ETDEWEB)

    Sullivan, Michael; /SLAC; Bertsche, Kirk; /SLAC; Bettoni, Simona; /CERN; Paoloni, Eugenio; /INFN, Pisa; Raimondi, Pantaleo; /INFN, Rome; Vobly, Pavel; /Novosibirsk, IYF

    2012-07-06

    A final focus magnet design that uses super-ferric magnets is introduced for the SuperB interaction region. The baseline design has air-core super-conducting quadrupoles. This idea instead uses super-conducting wire in an iron yoke. The iron is in the shape of a Panofsky quadrupole and this allows two quadrupoles to be side-by-side with no intervening iron as long as the gradients of the two quads are equal. This feature allows us to move in as close as possible to the collision point and minimize the beta functions in the interaction region. The superferric design has advantages as well as drawbacks and we will discuss these in the paper.

  2. A New Interaction Region Design for the Super-B Factory

    CERN Document Server

    Sullivan, Michael; Bettoni, Simona; Paoloni, Eugenio; Raimondi, Pantaleo; Vobly, Pavel

    2010-01-01

    A final focus magnet design that uses super-ferric magnets is introduced for the SuperB interaction region. The baseline design has air-core super-conducting quadrupoles. This idea instead uses super-conducting wire in an iron yoke. The iron is in the shape of a Panofsky quadrupole and this allows two quadrupoles to be sideby- side with no intervening iron as long as the gradients of the two quads are equal. This feature allows us to move in as close as possible to the collision point and minimize the beta functions in the interaction region. The superferric design has advantages as well as drawbacks and we will discuss these in the pape

  3. Recirculating linacs for a neutrino factory--Arc optics design and optimization

    CERN Document Server

    Bogacz, S A

    2001-01-01

    A conceptual lattice design for a muon accelerator based on recirculating linacs (Nucl. Instr. and Meth. A 472 (2001) 499, these proceedings) is presented here. The challenge of accelerating and transporting a large phase space of short-lived muons is answered here by presenting a proof-of-principle lattice design for a recirculating linac accelerator. It is the centerpiece of a chain of accelerators consisting of a 3 GeV linac and two consecutive recirculating linear accelerators, which facilitates acceleration starting after ionization cooling at 190 MeV/c and proceeding to 50 GeV. Beam transport issues for large-momentum-spread beams are accommodated by appropriate lattice design choices. The resulting arc optics is further optimized with a sextupole correction to suppress chromatic effects contributing to the emittance dilution. The presented proof-of-principle design of the arc optics with horizontal separation of multi-pass beams can be extended to all passes in both recirculating linacs.

  4. Design Concept of a Gamma-gamma Higgs Factory Driven by Thin Laser Targets and Energy Recovery Linacs

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Yuhong [JLAB

    2013-06-01

    A gamma-gamma collider has long been considered an option for a Higgs Factory. Such photon colliders usually rely on Compton back-scattering for generating high energy gamma photons and further Higgs bosons through gamma-gamma collisions. The presently existing proposals or design concepts all have chosen a very thick laser target (i.e., high laser photon intensity) for Compton scatterings. In this paper, we present a new design concept of a gamma-gamma collider utilizing a thin laser target (i.e., relatively low photon density), thus leading to a low electron to gamma photon conversion rate. This new concept eliminates most useless and harmful low energy soft gamma photons from multiple Compton scattering so the detector background is improved. It also greatly relaxes the requirement of the high peak power of the laser, a significant technical challenge. A high luminosity for such a gamma-gamma collider can be achieved through an increase of the bunch repetition rate and current of the driven electron beam. Further, multi-pass recirculating linac could greatly reduce the linac cost and energy recovery is required to reduce the needed RF power.

  5. Enhancement of Solubility of Lamotrigine by Solid Dispersion and Development of Orally Disintegrating Tablets Using 32 Full Factorial Design

    Directory of Open Access Journals (Sweden)

    Jatinderpal Singh

    2015-01-01

    Full Text Available Present investigation deals with the preparation and evaluation of orally disintegrating tablets (ODTs of lamotrigine using β-cyclodextrin and PVP-K30 as polymers for the preparation of solid dispersion which help in enhancement of aqueous solubility of this BCS CLASS-II drug and sodium starch glycolate (SSG and crospovidone as a superdisintegrating agent, to reduce disintegration time. The ODTs were prepared by direct compression method. Nine formulations were developed with different ratios of superdisintegrating agents. All the formulations were evaluated for disintegration time, weight variation, hardness, friability, drug content uniformity, wetting time, and in vitro drug release study. In vitro drug release study was performed using United States Pharmacopoeia (USP type 2 dissolution test apparatus employing paddle stirrer at 50 rpm using 900 mL of 0.1 N HCl maintained at 37°C ± 0.5°C as the dissolution medium. On the basis of evaluation parameters formulations were prepared using β-CD 1 : 1 solid dispersion. Then 32 full factorial design was applied using SSG and crospovidone in different ratios suggested by using design expert 8.0.7.1 and optimized formulation was prepared using amount of SSG and crospovidone as suggested by the software. The optimized formulation prepared had disintegrating time of 15 s, wetting time of 24 s, and % friability of 0.55.

  6. A study of physicochemical and biopharmaceutical properties of amoxicillin tablets using full factorial design and PCA biplot.

    Science.gov (United States)

    Pasqualoto, Kerly F M; Teófilo, Reinaldo F; Guterres, Marcos; Pereira, Flávia S; Ferreira, Márcia M C

    2007-07-09

    The variables that influence the tablets obtained by direct compression method deserve to be studied to minimize formulations costs and to improve the physicochemical and biopharmaceutical properties of the compacts. Here, we explore the adjuvants effects on amoxicillin tablet formulations considering multiple responses, and indicate the most suitable formulation composition. A 2(3) full factorial design was built to different amoxicillin formulations, each one containing three replicate batches, and eight responses (physicochemical and biopharmaceutical parameters) were obtained. The microcrystalline cellulose (MCC) type Avicel PH-102 (low) or PH-200 (high), the absence (low) or presence (high) of spray-dried lactose (LAC), and the absence (low) or presence (high) of disintegrant (DIS) were the levels investigated. The more relevant responses to the distinct formulations from the experimental design were hardness, friability, and the amount of amoxicillin dissolved during the first hour. PCA biplot indicated high values of amount of drug dissolved in 60 min as advantageous responses for the investigated amoxicillin tablet formulations and high values of friability as not desirable. Considering the individual response evaluation, the most suitable amoxicillin tablet formulation should present in its composition the MCC type Avicel PH-102 (low level) and the superdisintegrant agent (DIS high level), croscarmellose sodium, but no LAC (low level).

  7. Modeling and process optimization for microbial desulfurization of coal by using a two-level full factorial design

    Institute of Scientific and Technical Information of China (English)

    Golshani T.; Jorjani E.; Chelgani S.Chehreh; Shafaei S.Z.; Nafechi Y.Heidari

    2013-01-01

    The microbial sulfur removal was investigated on high sulfur content (1.9%) coal concentrate from Tabas coal preparation plant.A mixed culture of ferrooxidans microorganisms was isolated from the tailing dam of the plant.Full factorial method was used to design laboratory test and to evaluate the effects of pH,particle size,iron sulfate concentration,pulp density,and bioleaching time on sulfur reduction.Statistical analyses of experimental data were considered and showed increases of pH and particle size had negative effects on sulfur reduction,whereas increases of pulp density and bioleaching time raised microbial desulfurization rate.According to results of designing,and regarding statistical factors,the optimum values for maximum sulfur reduction were obtained; pH (1.5),particle size (-180μm),iron sulfate concentration (2.7 mmol/L),pulp density (10%) and bioleaching time (14d),which leaded to 51.5% reduction from the total sulfur of sample.

  8. Combined food and predator effects on songbird nest survival and annual reproductive success: results from a bi-factorial experiment.

    Science.gov (United States)

    Zanette, Liana; Clinchy, Michael; Smith, James N M

    2006-04-01

    Food and predators have traditionally been viewed as mutually exclusive alternatives when considering factors affecting animal populations. This has led to long controversies such as whether annual reproductive success in songbirds is primarily a function of food-restricted production or predator-induced loss. Recent studies on both birds and mammals suggest many of these controversies may be resolved by considering the combined effects of food and predators. We conducted a 2x2 manipulative food addition plus natural predator reduction experiment on song sparrows (Melospiza melodia) over three consecutive breeding seasons. Food and predators together affected partial clutch or brood loss, nest survival (total clutch or brood loss) and annual reproductive success. When combined, our two treatments reduced partial losses by more than expected if the effects of food and predators were independent and additive. Food and predators also interacted in their effects on nest survival since food addition significantly reduced the rate of nest predation. While annual reproductive success was highly correlated with nest predation (r2=0.71) the strength of this relationship was reinforced by the indirect effects of food addition on nest predation. A stepwise multiple regression showed that the residual variation in annual reproductive success was explained by food effects on the total number of eggs laid over the season and the combined effects of food and predators on partial losses noted above. We conclude that annual reproductive success in song sparrows is a function of both food-restricted production and predator-induced loss and indirect food and predator effects on both clutch and brood loss. We highlight the parallels between our results and those from a comparable bi-factorial experiment on mammals because we suspect combined food and predator effects are likely the norm in both birds and mammals.

  9. Muon Colliders and Neutrino Factories

    Energy Technology Data Exchange (ETDEWEB)

    Kaplan, Daniel M. [IIT, Chicago

    2015-05-29

    Muon colliders and neutrino factories are attractive options for future facilities aimed at achieving the highest lepton-antilepton collision energies and precision measurements of Higgs boson and neutrino mixing matrix parameters. The facility performance and cost depend on how well a beam of muons can be cooled. Recent progress in muon cooling design studies and prototype tests nourishes the hope that such facilities could be built starting in the coming decade. The status of the key technologies and their various demonstration experiments is summarized. Prospects "post-P5" are also discussed.

  10. Muon Colliders and Neutrino Factories

    CERN Document Server

    Kaplan, Daniel M

    2014-01-01

    Muon colliders and neutrino factories are attractive options for future facilities aimed at achieving the highest lepton-antilepton collision energies and precision measurements of Higgs boson and neutrino mixing matrix parameters. The facility performance and cost depend on how well a beam of muons can be cooled. Recent progress in muon cooling design studies and prototype tests nourishes the hope that such facilities could be built starting in the coming decade. The status of the key technologies and their various demonstration experiments is summarized. Prospects "post-P5" are also discussed.

  11. Nanoemulsions containing a synthetic chalcone as an alternative for treating cutaneous leshmaniasis: optimization using a full factorial design

    Directory of Open Access Journals (Sweden)

    Mattos CB

    2015-09-01

    Full Text Available Cristiane Bastos de Mattos,1 Débora Fretes Argenta,1 Gabriela de Lima Melchiades,1 Marlon Norberto Sechini Cordeiro,2 Maiko Luis Tonini,3 Milene Hoehr Moraes,3 Tanara Beatriz Weber,4 Silvane Souza Roman,4 Ricardo José Nunes,2 Helder Ferreira Teixeira,1 Mário Steindel,3 Letícia Scherer Koester1 1Faculdade de Farmácia, Programa de Pós-Graduação em Ciências Farmacêuticas, Universidade Federal do Rio Grande do Sul, Porto Alegre, Rio Grande do Sul, Brazil; 2Departamento de Química, 3Departamento de Microbiologia, Imunologia e Parasitologia, Universidade Federal de Santa Catarina, Florianópolis, Santa Catarina, Brazil; 4Departamento de Ciências Biológicas, Universidade Regional Integrada do Alto Uruguai e das Missões, Erechim, Rio Grande do Sul, Brazil Abstract: Nanoemulsions are drug delivery systems that may increase the penetration of lipophilic compounds through the skin, enhancing their topical effect. Chalcones are compounds of low water solubility that have been described as promising molecules for the treatment of cutaneous leishmaniasis (CL. In this context, the aim of this work was to optimize the development of a nanoemulsion containing a synthetic chalcone for CL treatment using a 22 full factorial design. The formulations were prepared by spontaneous emulsification and the experimental design studied the influence of two independent variables (type of surfactant – soybean lecithin or sorbitan monooleate and type of co-surfactants – polysorbate 20 or polysorbate 80 on the physicochemical characteristics of the nanoemulsions, as well as on the skin permeation/retention of the synthetic chalcone in porcine skin. In order to evaluate the stability of the systems, the antileishmanial assay was performed against Leishmania amazonensis 24 hours and 60 days after the preparation of the nanoemulsions. The formulation composed of soybean lecithin and polysorbate 20 presented suitable physicochemical characteristics (droplet size

  12. Recent SuperB Design Choices Improve Next-Generation e e___ B-Factory Collider

    Energy Technology Data Exchange (ETDEWEB)

    Wittmer, W.; Bertsche, K.; Chao, A.; Novokhatski, A.; Nosochkov, Y.; Seeman, J.; Sullivan, M.K.; Wienands, U.; /SLAC; Bogomyagkov, A.V.; Levichev, E.; Nikitin, S.; Piminov, P.; Shatilov, D.; Sinyatkin, S.; Vobly, P.; Okunev, I.N.; /Novosibirsk, IYF; Bolzon, B.; Brunetti, L.; Jeremie, A.; /Annecy, LAPP; Biagini, M.E.; Boni, R.; /Frascati /INFN, Pisa /Pisa U. /INFN, Genoa /Genoa U. /CERN /Orsay, LAL /Saclay

    2011-08-19

    The SuperB international team continues to optimize the design of an electron-positron collider, which will allow the enhanced study of the origins of flavor physics. The project combines the best features of a linear collider (high single-collision luminosity) and a storage-ring collider (high repetition rate), bringing together all accelerator physics aspects to make a very high luminosity of 10{sup 36} cm{sup -2} sec{sup -1}. This asymmetric-energy collider with a polarized electron beam will produce hundreds of millions of B-mesons at the {Upsilon}(4S) resonance. The present design is based on extremely low emittance beams colliding at a large Piwinski angle to allow very low {beta}*{sub y} without the need for ultra short bunches. Use of crab-waist sextupoles will enhance the luminosity, suppressing dangerous resonances and allowing for a higher beam-beam parameter. The project has flexible beam parameters, improved dynamic aperture, and spin-rotators in the Low Energy Ring for longitudinal polarization of the electron beam at the Interaction Point. Optimized for best colliding-beam performance, the facility may also provide high-brightness photon beams for synchrotron radiation applications.

  13. Analysis of Factorial Experiments.

    Science.gov (United States)

    1985-09-01

    where ;(f)= If+xon x(fj- x(n y:. rf is the diagonal matrix with the appropriate diagonal elements (the (i ,i) element is 1/y12 if the i th element of...0’----.0.5 ............. ...... * 0 4.0. fnone 1 12 13 123 14 124 134 1234 . active 2 3 23 4 24 34 234 effect ’,p I- .9 I * cprI V -7 4 7-. 4-, .r

  14. Design and performance of a compact scanning transmission X-ray microscope at the Photon Factory

    Energy Technology Data Exchange (ETDEWEB)

    Takeichi, Y., E-mail: yasuo.takeichi@kek.jp; Mase, K.; Ono, K. [Institute of Materials Structure Science, High Energy Accelerator Research Organization, 1-1 Oho, Tsukuba 305-0801 (Japan); Department of Materials Structure Science, SOKENDAI (The Graduate University for Advanced Studies), 1-1 Oho, Tsukuba 305-0801 (Japan); Inami, N. [Institute of Materials Structure Science, High Energy Accelerator Research Organization, 1-1 Oho, Tsukuba 305-0801 (Japan); Suga, H. [Department of Earth and Planetary Systems Science, Hiroshima University, 1-3-1 Kagamiyama, Higashi-Hiroshima 739-8526 (Japan); Miyamoto, C. [Department of Earth and Planetary Systems Science, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku 113-0033 (Japan); Ueno, T. [National Institute for Materials Science, 1-2-1 Sengen, Tsukuba 305-0047 (Japan); Takahashi, Y. [Institute of Materials Structure Science, High Energy Accelerator Research Organization, 1-1 Oho, Tsukuba 305-0801 (Japan); Department of Earth and Planetary Systems Science, Hiroshima University, 1-3-1 Kagamiyama, Higashi-Hiroshima 739-8526 (Japan); Department of Earth and Planetary Systems Science, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku 113-0033 (Japan)

    2016-01-15

    We present a new compact instrument designed for scanning transmission X-ray microscopy. It has piezo-driven linear stages, making it small and light. Optical components from the virtual source point to the detector are located on a single optical table, resulting in a portable instrument that can be operated at a general-purpose spectroscopy beamline without requiring any major reconstruction. Careful consideration has been given to solving the vibration problem common to high-resolution microscopy, so as not to affect the spatial resolution determined by the Fresnel zone plate. Results on bacteriogenic iron oxides, single particle aerosols, and rare-earth permanent magnets are presented as examples of its performance under diverse applications.

  15. Systematic Analysis of Carbon Dioxide Activation of Waste Tire by Factorial Design

    Institute of Scientific and Technical Information of China (English)

    P.P.M. Fung; W.H-Cheung; G. McKay

    2012-01-01

    In this study, waste tire was used as raw material for the production of activated carbons through pyrolysis. 'Fire char was first produced by carbomzation at 550℃ under nitrogen. A two tactortal design was used to optimize the production of activated carbon from tire char. The effects of several factors controlling the activation process, such as temperature (.830-930℃), time (2-6h) and percentage ot carbon dioxide (70%-100%) were investigated. The production was described mathematically as a function of these three factors. First order modeling equations were developed for surface area, yield and mesopore volume. It was concluded that the yield, BET surface area and mesopore volume of activated carbon were most sensitive to activation temperature and time while percentage of carbon dioxide in the activation gas was a less significant factor.

  16. Virtual Factory as a Method of Foundry Design and Production Management

    Directory of Open Access Journals (Sweden)

    A. Stawowy

    2013-01-01

    Full Text Available The paper outlines the methodology of virtual design of a foundry plant as a system. The most important stage in the procedure involvesthe development of a model defined as a set of data about the system. Model development involves two stages: defining the model’sarchitecture and specifying the model data in the form of parameters and input-output relationships. The structure is understood asconfiguration of machines and transport units, representing the sub-systems and system components. As the main purpose of thesimulation procedure is to find the characteristics of the system’s behaviour, the merits of the iterative method involving analysis,synthesis and evaluation of results are fully explored.

  17. Approach to improve the productivity of bioactive compounds of the cyanobacterium Anabaena oryzae using factorial design

    Directory of Open Access Journals (Sweden)

    Ragaa A. Hamouda

    2017-09-01

    Full Text Available Cyanobacteria are one of the richest sources of biomedical relevant compounds with extensive therapeutic pharmaceutical applications and are also known as producer of intracellular and extracellular metabolites with diverse biological activities. The genus Anabaena sp. is known to produce antimicrobial compounds, like phycocyanin and others. The goal of this study was to optimize the production of these bioactive compounds. The Plackett–Burman experimental design was used to screen and evaluate the important medium components that influence the production of bioactive compounds. In this present study, eight independent factors including NaNO3, K2HPO4, MgSO4·7H2O, CaCl2, citric acid, ammonium ferric citrate, ethylene diamine tetraacetic acid disodium magnesium salt (EDTA-Na2Mg and Na2CO3 were surveyed and the effective variables for algal components production of Anabaena oryzae were determined using two-levels Plackett–Burman design. Results analysis showed that the best medium components were NaNO3 (2.25 g l−1; K2HPO4 (0.02 g l−1; MgSO4 (0.0375 g l−1; CaCl2 (0.018 g l−1; citric acid (0.009 g l−1; ammonium ferric citrate (0.009 g l−1 and EDTA-Na2 (0.0015 g l−1 respectively. The total chlorophyll-a, carotenoids, phenol, tannic acid and flavonoid contents in crude extract of Anabaena oryzae were determined. They were 47.7, 4.11, 0.256, 1.046 and 1.83 μg/ml, respectively. The antioxidant capacity was 62.81%.

  18. Introducing Experience Goals into Packaging Design

    OpenAIRE

    Joutsela, Markus; Roto, Virpi; Lloyd, Peter; Bohemia, Erik

    2016-01-01

    Consumer experiences are an increasingly important driving force for commerce, affecting also packaging design. Yet, experience design for packages is rarely studied. Specifically, there is a gap in research regarding the integration of experiential goals, Xgoals, into the packaging design process. Open questions include how to describe Xgoals in design briefs when package design is outsourced, how to deal with changes during the design process, and how to evaluate whether the delivered desig...

  19. Molecular marker-based prediction of hybrid performance in maize using unbalanced data from multiple experiments with factorial crosses.

    Science.gov (United States)

    Schrag, Tobias A; Möhring, Jens; Maurer, Hans Peter; Dhillon, Baldev S; Melchinger, Albrecht E; Piepho, Hans-Peter; Sørensen, Anker P; Frisch, Matthias

    2009-02-01

    In hybrid breeding, the prediction of hybrid performance (HP) is extremely important as it is difficult to evaluate inbred lines in numerous cross combinations. Recent developments such as doubled haploid production and molecular marker technologies have enhanced the prospects of marker-based HP prediction to accelerate the breeding process. Our objectives were to (1) predict HP using a combined analysis of hybrids and parental lines from a breeding program, (2) evaluate the use of molecular markers in addition to phenotypic and pedigree data, (3) evaluate the combination of line per se data with marker-based estimates, (4) study the effect of the number of tested parents, and (5) assess the advantage of haplotype blocks. An unbalanced dataset of 400 hybrids from 9 factorial crosses tested in different experiments and data of 79 inbred parents were subjected to combined analyses with a mixed linear model. Marker data of the inbreds were obtained with 20 AFLP primer-enzyme combinations. Cross-validation was used to assess the performance prediction of hybrids of which no or only one parental line was testcross evaluated. For HP prediction, the highest proportion of explained variance (R (2)), 46% for grain yield (GY) and 70% for grain dry matter content (GDMC), was obtained from line per se best linear unbiased prediction (BLUP) estimates plus marker effects associated with mid-parent heterosis (TEAM-LM). Our study demonstrated that HP was efficiently predicted using molecular markers even for GY when testcross data of both parents are not available. This can help in improving greatly the efficiency of commercial hybrid breeding programs.

  20. Comparison of Ultrasound-assisted Extraction and Dynamic Maceration Over Content of Tagitinin C obtained from Tithonia diversifolia (Hemsl.) A. Gray Leaves Using Factorial Design.

    Science.gov (United States)

    Silva, Aline M R; Ferreira, Nayara L O; Oliveira, Anselmo E; Borges, Leonardo L; Conceição, Edemilson C

    2017-01-01

    Tithonia diversifolia belongs to the Asteraceae family. The leaves of T. diversifolia have been studied lately because of the presence of tagitinin C. Looking for an easy and inexpensive method to extract tagitinin C from T. diversifolia leaves, this work aims to conduct a screening to evaluate the influence of different experimental factors using the dynamic maceration and ultrasound-assisted extraction methods with 2(3) factorial design based on response surface methodology in enhancing this chemical marker extraction. The experimental factors were: extraction time (ET) of 30 and 60 minutes, solid: liquid ratio (SLR) of 5 and 10 grams/grams and ethanolic strength (ES) 48 and 96% (w/w). The experiments were done tripled. The content of tagitinin C in each produced extract was quantified by HPLC method. The highest concentrations of tagitinin C obtained under the experimental design were 0.53 mg/mL and 0.71 mg/mL, respectively for dynamic maceration (DM) and ultrasound-assisted extraction (UAE) from Tithonia diversifolia powdered leaves. For the UAE method, the main parameter for higher contents of tagitinin C was the solid: liquid ratio, followed by the ethanolic strength, and the extraction time was not significant for this method. As for the DM method, all the parameters (SLR, ES, and ET) were significant for a higher content of tagitinin C. Based on the obtained results, it was revealed that the ultrasound-assisted extraction was more effective than dynamic maceration for tagitinin C extraction from T. diversifolia powdered leaves. Tithonia diversifolia leaves possess tagitinin C, a sesquiterpene lactone, as an important secondary metabolite with several biological activities, such as antimalarial, gastroprotective, chemotherapeutic adjuvants, and toxic activities.Ultrasound-assisted extraction was more effective to obtain higher levels of tagitinin C when compared with dynamic maceration extraction.Factorial design can be employed as a screening tool to find

  1. B-factory detectors

    CERN Document Server

    Marlow, D R

    2002-01-01

    The designs of the recently commissioned BaBar and Belle B-Factory detectors are described. The discussion is organized around the methods and instruments used to detect the so-called gold-plated-mode B sup 0->J/PSI K sub S decays and related modes.

  2. Adaptive designs for sequential experiments

    Institute of Scientific and Technical Information of China (English)

    林正炎; 张立新

    2003-01-01

    Various adaptive designs have been proposed and applied to clinical trials, bioassay, psychophysics, etc.Adaptive designs are also useful in high cost engineering trials.More and more people have been paying attention to these design methods. This paper introduces several broad families of designs, such as the play-the-winner rule, randomized play-the-winner rule and its generalization to the multi-arm case, doubly biased coin adaptive design, Markov chain model.

  3. A comprehensive factorial design study of variables affecting protein extraction from formalin-fixed kidney tissue samples.

    Science.gov (United States)

    Araújo, J E; Oliveira, E; Otero-Glez, A; Santos Nores, J; Igrejas, G; Lodeiro, C; Capelo, J L; Santos, H M

    2014-02-01

    Formalin-fixed tissues are an important source of biological samples for biomedical research. However, proteomics analysis of formalin-fixed tissues has been set aside by formalin-induced protein modifications, which reduce protein extraction efficiency. In this study, a two level full factorial experimental design (2(4)) was used to determine the effects of the extracting conditions in the efficiency of protein recovery from formalin-fixed kidney samples. The following variables were assessed: temperature of extraction, pH of extraction, composition of the extracting buffer and the use ultrasonic energy applied with probe. It is clearly demonstrated that when hating and ultrasonic energy are used in conjunction, a 7-fold increase (p protein extraction is obtained if compared to extracting conditions for which neither heating nor ultrasonic energy are used. The optimization study was done following the amount of protein extracted by UV (Nanodrop(®) technology, protein ABS at 280 nm) and by 1D SDS-PAGE. Extracts obtained with the optimized conditions were subjected to LC-MALDI MS/MS. A total of 112 proteins were identified.

  4. Amidated pectin/sodium carboxymethylcellulose microspheres as a new carrier for colonic drug targeting: Development and optimization by factorial design.

    Science.gov (United States)

    Gadalla, Hytham H; El-Gibaly, Ibrahim; Soliman, Ghareb M; Mohamed, Fergany A; El-Sayed, Ahmed M

    2016-11-20

    The colon is a promising site for drug targeting owing to its long transit time and mild proteolytic activity. The aim of this study was to prepare new low methoxy amidated pectin/NaCMC microspheres cross-linked by a mixture of Zn(2+) and Al(3+) ions and test their potential for colonic targeting of progesterone. A 2(4) factorial design was carried out to optimize the preparation conditions. High drug entrapment efficiency (82-99%) was obtained and it increased with increasing drug concentration but decreased with increasing polymer concentration. Drug release rate was directly proportional to the microsphere drug content and inversely related to Al(3+) ion concentration. Drug release was minimal during the first 3h but was significantly improved in the presence of 1% rat caecal contents, confirming the microsphere potential for colonic delivery. The microspheres achieved >2.3-fold enhancement of colonic progesterone permeability. These results confirm the viability of the produced microspheres as colon-targeted drug delivery vehicle.

  5. A Factorial Design to Numerically Study the Effects of Brake Pad Properties on Friction and Wear Emissions

    Directory of Open Access Journals (Sweden)

    Jens Wahlström

    2016-01-01

    Full Text Available Airborne particulate emissions originating from the wear of pads and rotors of disc brakes contribute up to 50% of the total road emissions in Europe. The wear process that takes place on a mesoscopic length scale in the contact interfaces between the pads and rotors can be explained by the creation and destruction of contact plateaus. Due to this complex contact situation, it is hard to predict how changes in the wear and material parameters of the pad friction material will affect the friction and wear emissions. This paper reports on an investigation of the effect of different parameters of the pad friction material on the coefficient of friction and wear emissions. A full factorial design is developed using a simplified version of a previously developed cellular automaton approach to investigate the effect of four factors on the coefficient of friction and wear emission. The simulated result indicates that a stable third body, a high specific wear, and a relatively high amount of metal fibres yield a high and stable mean coefficient of friction, while a stable third body, a low specific wear, a stable resin, and a relatively high amount of metal fibres give low wear emissions.

  6. A pilot human pharmacokinetic study and influence of formulation factors on orodispersible tablet incorporating meloxicam solid dispersion using factorial design.

    Science.gov (United States)

    Aboelwafa, Ahmed A; Fahmy, Rania H

    2012-01-01

    Meloxicam (MLX) suffers from poor aqueous solubility leading to slow absorption following oral administration; hence, immediate release MLX tablet is unsuitable in the treatment of acute pain. This study aims to overcome such a drawback by increasing MLX solubility and dissolution using PEG solid dispersion (SD), then, to investigate the feasibility of incorporating the SD into orodispersible tablets (ODTs). A 2(3) full factorial design was employed to investigate the influence of three formulation variables on MLX ODTs. The selected factors: camphor (X(1)) as pore-forming material, and croscarmellose sodium (X(2)) as superdisintegrant, showed significant positive influence, while PEG content (X(3)) was proved to negatively affect both disintegration and wetting times. In addition, isomalt increased disintegration and wetting times when compared to mannitol as diluents. The pharmacokinetic assessment of the optimum ODT formulation in healthy human subjects proved that the faster MLX dissolution by using PEG solid dispersion at pH 6.8 resulted in more rapid absorption of MLX. The rate of absorption of MLX from ODT was significantly faster (p = 0.030) with a significantly higher peak plasma concentration (P = 0.037) when compared to the marketed immediate release MLX tablet with a mean oral disintegration time of 17 ± 3 s.

  7. Optimization of primary culture condition for mesenchymal stem cells derived from umbilical cord blood with factorial design.

    Science.gov (United States)

    Fan, Xiubo; Liu, Tianqing; Liu, Yang; Ma, Xuehu; Cui, Zhanfeng

    2009-01-01

    Mesenchymal stem cells (MSCs) can not only support the expansion of hematopoietic stem cells in vitro, but also alleviate complications and accelerate recovery of hematopoiesis during hematopoietic stem cell transplantation. However, it proved challenging to culture MSCs from umbilical cord blood (UCB) with a success rate of 20-30%. Many cell culture parameters contribute to this outcome and hence optimization of culture conditions is critical to increase the probability of success. In this work, fractional factorial design was applied to study the effect of cell inoculated density, combination and dose of cytokines, and presence of serum and stromal cells. The cultured UCB-MSC-like cells were characterized by flow cytometry and their multilineage differentiation potentials were tested. The optimal protocol was identified achieving above 90% successful outcome: 2 x 10(6) cells/mL mononuclear cells inoculated in Iscove's modified Dulbecco's medium supplied with 10% FBS, 15 ng/mL IL-3, and 5 ng/mL Granulocyte-macrophage colony-stimulating factor (GM-CSF). Moreover, the UCB-MSC-like cells expressed MSC surface markers of CD13, CD29, CD105, CD166, and CD44 positively, and CD34, CD45, and human leukocyte antigens-DR (HLA-DR) negatively. Meanwhile, these cells could differentiate into osteoblasts, chondrocytes, and adipocytes similarly to MSCs derived from bone marrow. In conclusion, we have developed an efficient protocol for the primary culture of UCB-MSCs by adding suitable cytokines into the culture system.

  8. Multivariate factorial analysis to design a robust batch leaching test to assess the volcanic ash geochemical hazard.

    Science.gov (United States)

    Ruggieri, Flavia; Gil, Raúl A; Fernandez-Turiel, Jose-Luis; Saavedra, Julio; Gimeno, Domingo; Lobo, Agustin; Martinez, Luis D; Rodriguez-Gonzalez, Alejandro

    2012-04-30

    A method to obtain robust information on short term leaching behaviour of volcanic ashes has been developed independently on the sample age. A mixed factorial design (MFD) was employed as a multivariate strategy for the evaluation of the effects of selected control factors and their interactions (amount of sample (A), contact time (B), and liquid to solid ratio or L/S (C)) on the leaching process of selected metals (Na, K, Mg, Ca, Si, Al, V, Mn, Fe, and Co) and anions (Cl(-) and SO(4)(2-)). Box plots of the data acquired were used to evaluate the reproducibility achieved at different experimental conditions. Both the amount of sample (A) and leaching time (B) had a significant effect on the element stripping whereas the L/S ratio influenced only few elements. The lowest dispersion values have been observed when 1.0 g was leached with an L/S ratio equal to 10, shaking during 4 h. The entire method is completed within few hours, and it is simple, feasible and reliable in laboratory conditions. Copyright © 2012 Elsevier B.V. All rights reserved.

  9. Full factorial experimental design analysis of Rhodamine B removal from water using organozeolite from coal bottom ash

    Directory of Open Access Journals (Sweden)

    Raquel R. Alcântara, Rafael O. R. Muniz, Denise A. Fungaro

    2016-01-01

    Full Text Available Zeolitic material synthesized using coal bottom ash asraw materialwas modified by cationic surfactant. Raw bottom ash and zeolitic materials were characterized using various techniques to obtain its physical and chemical properties. Surfactant modified zeolite (SMZBA was used as alternative low-cost adsorbent for removal of Rhodamine B (RB dye from aqueous solution. Dye adsorption equilibrium was attained after 40 min of the contact time and adsorption kinetics were described by the pseudo second order kinetic model. Equilibrium adsorption data were adjusted using non-linear equations of the Langmuir, Freundlich, Temkin and Dubinin-Radushkevich (D-R models. Error analysis showed that D-R was the most appropriate for fitting the experimental data.The reuse of the remaining solution generated from the synthesis of zeolite was effective. To optimize the operating conditions, the temperature, pH, adsorbent dosage and initial concentration of the dye were investigated by full factorial experimental design method; adsorbent dosage, initial concentration and interaction of the two were found as the most significant factors with P = 0.02 lower than 95% confidence level. The results showed that SMZBA is a good adsorbent for the removal of RB from aqueous effluent.

  10. The increase of surface area of a Brazilian palygorskite clay activated with sulfuric acid solutions using a factorial design

    Directory of Open Access Journals (Sweden)

    R. N. Oliveira

    2013-01-01

    Full Text Available Palygorskite is fibrous clay in which the structural tetrahedral and octahedral layers are organized in a way that structural channels are formed, leading to high surface area. However, impurities inside the channels and aggregated ones considerably reduce the available area. In order to increase the surface area, an activation treatment can be considered useful. The goal of this work is the activation of palygorskite from Guadalupe, Piauí, via sulfuric acid treatment using a two-level factorial design. The influence of three parameters (solution molarity, temperature and time on BET surface area was determined. Moreover, samples were characterized via X-ray diffraction (XRD and fluorescence (XRF, Fourier-transform infrared spectroscopy (FTIR and transmission electron microscopy (TEM. The largest surface area (282 m²/g without considerable changes in clay structure and morphology was found in a sample treated with 5M H2SO4 at 70°C for 1h. The main parameters that favored the improvement of the surface area were the solution's molarity, temperature and their interaction.

  11. Influence of urea, isopropanol, and propylene glycol on rutin in vitro release from cosmetic semisolid systems estimated by factorial design.

    Science.gov (United States)

    Baby, Andre Rolim; Haroutiounian-Filho, Carlos Alberto; Sarruf, Fernanda Daud; Pinto, Claudineia Aparecida Sales de Oliveira; Kaneko, Telma Mary; Velasco, Maria Valeria Robles

    2009-03-01

    Rutin, one of the major flavonoids found in an assortment of plants, was reported to act as a sun protection factor booster with high anti-UVA defense, antioxidant, antiaging, and anticellulite, by improvement of the cutaneous microcirculation. This research work aimed at evaluating the rutin in vitro release from semisolid systems, in vertical diffusion cells, containing urea, isopropanol and propylene glycol, associated or not, according to the factorial design with two levels with center point. Urea (alone and in association with isopropanol and propylene glycol) and isopropanol (alone and in association with propylene glycol) influenced significant and negatively rutin liberation in diverse parameters: flux (microg/cm(2).h); apparent permeability coefficient (cm/h); rutin amount released (microg/cm(2)); and liberation enhancement factor. In accordance with the results, the presence of propylene glycol 5.0% (wt/wt) presented statistically favorable to promote rutin release from this semisolid system with flux = 105.12 +/- 8.59 microg/cm(2).h; apparent permeability coefficient = 7.01 +/- 0.572 cm/h; rutin amount released = 648.80 +/- 53.01 microg/cm(2); and liberation enhancement factor = 1.21 +/- 0.07.

  12. Development of hydroethanolic extract of Ipomoea pes-caprae using factorial design followed by antinociceptive and anti-inflammatory evaluation

    Directory of Open Access Journals (Sweden)

    Daniela Vieira

    2012-01-01

    Full Text Available Ipomoea pes-caprae (L. R. Br., Convolvulaceae, is a medicinal plant that grows abundantly as a pan-tropical stand plant. The 3² (two factors and three levels factorial design, was applied to determine the best time and drug/solvent proportion to maximize the flavonoid content in the hydroethanolic extract by maceration process. The antinociceptive and anti-inflammatory effects were studied at 5-20 mg/kg, i.p., using the writhing test and carrageenan-induced pleurisy models in mice. The optimized extract was able to inhibit more than 50% of abdominal writhing at 20 mg/kg, with 55.88%±2.4 of maximum inhibition. Indomethacin, used as positive control, inhibited 64.86% at 10 mg/kg. In the pleurisy model, the extract produced dose-dependent inhibition of the first phase of inflammation (4 h in the pleural cavity induced by injection of carrageenan (1% in mice. It inhibited 50%±0.82 (p<0.01 of exudation induced by carrageenan, and 60.88%±0.14 (p<0.01 of leukocyte migration to the pleural cavity. In conclusion, the results validate the technological conditions of the maceration process to produce an optimized bioactive herb extract for the development of analgesic and anti-inflammatory phytopharmaceuticals using 70 ºGL ethanol, a plant to solvent ratio of 12.5% (w/v, and ten days of maceration.

  13. Fractional Factorial Design Study on the Performance of GAC-Enhanced Electrocoagulation Process Involved in Color Removal from Dye Solutions

    Directory of Open Access Journals (Sweden)

    Iuliana Gabriela Breaban

    2013-07-01

    Full Text Available The aim of this study was to determine the effects of main factors and interactions on the color removal performance from dye solutions using the electrocoagulation process enhanced by adsorption on Granular Activated Carbon (GAC. In this study, a mathematical approach was conducted using a two-level fractional factorial design (FFD for a given dye solution. Three textile dyes: Acid Blue 74, Basic Red 1, and Reactive Black 5 were used. Experimental factors used and their respective levels were: current density (2.73 or 27.32 A/m2, initial pH of aqueous dye solution (3 or 9, electrocoagulation time (20 or 180 min, GAC dose (0.1 or 0.5 g/L, support electrolyte (2 or 50 mM, initial dye concentration (0.05 or 0.25 g/L and current type (Direct Current—DC or Alternative Pulsed Current—APC. GAC-enhanced electrocoagulation performance was analyzed statistically in terms of removal efficiency, electrical energy, and electrode material consumptions, using modeling polynomial equations. The statistical significance of GAC dose level on the performance of GAC enhanced electrocoagulation and the experimental conditions that favor the process operation of electrocoagulation in APC regime were determined. The local optimal experimental conditions were established using a multi-objective desirability function method.

  14. Biosurfactant production by Pseudomonas aeruginosa MSIC02 in cashew apple juice using a 24 full factorial experimental design

    Directory of Open Access Journals (Sweden)

    Rocha Maria Valderez Ponte

    2014-01-01

    Full Text Available In this work, the production of biosurfactants from cashew apple juice by P. aeruginosa MSIC02 was investigate by carrying out a 24 full factorial experimental design, using temperature, glucose concentration from cashew apple juice, phosphorous concentration and cultivation time as variables. The response variable was the percentage of reduction in surface tension in the cell-free culture medium, since it indicates the surface-active agent production. Maximum biosurfactant production, equivalent to a 58% reduction in surface tension, was obtained at 37°C, with glucose concentration of 5.0 g/L and no phosphorous supplementation. Surface tension reduction was significant, since low values were observed in the cell-free medium (27.50 dyne/cm, indicating that biosurfactant was produced. The biosurfactant emulsified different hydrophobic sources and showed stability in the face of salinity, exposure to high temperatures and extreme pH conditions. These physiochemical properties demonstrate the potential for using biosurfactants produced by P. aeruginosa MSIC02 in various applications.

  15. The Optimization of the Oiling Bath Cosmetic Composition Containing Rapeseed Phospholipids and Grapeseed Oil by the Full Factorial Design

    Directory of Open Access Journals (Sweden)

    Michał Górecki

    2015-04-01

    Full Text Available The proper condition of hydrolipid mantle and the stratum corneum intercellular matrix determines effective protection against transepidermal water loss (TEWL. Some chemicals, improper use of cosmetics, poor hygiene, old age and some diseases causes disorder in the mentioned structures and leads to TEWL increase. The aim of this study was to obtain the optimal formulation composition of an oiling bath cosmetic based on rapeseed phospholipids and vegetable oil with high content of polyunsaturated fatty acids. In this work, the composition of oiling bath form was calculated and the degree of oil dispersion after mixing the bath preparation with water was selected as the objective function in the optimizing procedure. The full factorial design 23 in the study was used. The concentrations of rapeseed lecithin ethanol soluble fraction (LESF, alcohol (E and non-ionic emulsifier (P were optimized. Based on the calculations from our results, the optimal composition of oiling bath cosmetic was: L (LESF 5.0 g, E (anhydrous ethanol 20.0 g and P (Polysorbate 85 1.5 g. The optimization procedure used in the study allowed to obtain the oiling bath cosmetic which gives above 60% higher emulsion dispersion degree 5.001 × 10−5 cm−1 compared to the initial formulation composition with the 3.096 × 10−5 cm−1.

  16. Full factorial experimental design applied to oxalic acid photocatalytic degradation in TiO2 aqueous suspension

    Directory of Open Access Journals (Sweden)

    N. Barka

    2014-11-01

    Full Text Available Full factorial experimental design technique was used to study the main effects and the interaction effects between operational parameters in the photocatalytic degradation of oxalic acid in a batch photo-reactor using TiO2 aqueous suspension. The important parameters which affect the removal efficiency of oxalic acid such as agitation, initial concentration, volume of the solution and TiO2 dosage were investigated. The parameters were coded as X1, X2, X3 and X4, consecutively, and were investigated at two levels (−1 and +1. The effects of individual variables and their interaction effects for dependent variables, namely, photocatalytic degradation efficiency (% were determined. From the statistical analysis, the most effective parameters in the photocatalytic degradation efficiency were initial concentration and volume of solution. The interaction between initial concentration, volume of solution and TiO2 dosage was the most influencing interaction. However, the interaction between agitation, initial concentration and volume of solution was the least influencing parameter.

  17. Assessing post‐disaster consequences for health at the population level: experience from the AZF factory explosion in Toulouse

    Science.gov (United States)

    Lang, Thierry; Schwoebel, Valérie; Diène, Eloi; Bauvin, Eric; Garrigue, Eric; Lapierre‐Duval, Karine; Guinard, Anne; Cassadou, Sylvie

    2007-01-01

    Background A major explosion occurred in the AZF chemical factory in Toulouse in September 2001. A comprehensive programme of epidemiological surveillance was set up. Objectives To present an overview of the programme and discuss the methods and potential utility of post‐disaster epidemiology. The programme had three objectives: (1) to analyse comprehensively the short‐term and long‐term effects of air, water and secondary soil pollution on health; (2) to identify health problems needing special attention; and (3) to investigate the long‐term direct and indirect effects on the population's health. Methods The programme was organised through three committees: (1) a scientific committee, (2) an executive programme committee and (3) an institutional committee which aimed to facilitate exchanges between the epidemiologists, the regional authorities, the population and the media. As the catastrophe was an industrial disaster that had a major effect on workers and companies, and also caused severe damage to many schools and buildings all over the city, routine and ad hoc surveillance systems were used and three specific ad hoc questionnaire surveys in workers, schoolchildren and the general population were planned. Results and Conclusions Although the routine surveillance systems had limitations, several sources provided useful information for public health decisions and were found to be concordant with ad hoc epidemiological studies. Defining a victim was central to the choice of a programme design based on an approach either to victims of the disaster or to the entire population in the surrounding region. Anticipation and preparation for such disasters are thus required. PMID:17234867

  18. Design and Initial Commissioning of Beam Diagnostics for the PEP-II B Factory.

    Science.gov (United States)

    Fisher, A. S.; Alzofon, D.; Arnett, D.; Bong, E. L.; Brugnoletti, B.; Collins, B.; Daly, E.; Gioumousis, A.; Johnson, R.; Kulikov, A.; Kurita, N.; Langton, J.; McCormick, D.; Noriega, R.; Smith, S.; Smith, V.; Stege, R.; Bjork, M.; Chin, M.; Hinkson, J.; McGill, R.; Suwada, T.

    1997-05-01

    PEP-II is a 2.2-km-circumference collider with a 2.1-A, 3.1-GeV positron ring (the Low-Energy Ring) 1 m above a 1-A, 9-GeV electron ring (the High-Energy Ring); both are designed for 3 A maximum. We will describe the beam diagnostics and present initial measurements from HER commissioning, expected to start in March 1997. LER commissioning will follow in 1998. The beam size and pulse duration are measured using near-UV synchrotron light extracted by grazing-incidence mirrors that must withstand up to 200 W/cm. To measure the charge in every bucket at 60 Hz with an accuracy of ≈0.5%, the sum signal from a set of 4 pickup buttons is digitized and averaged over 256 samples per bucket. The sum is normalized to the ring current, measured by a DC current transformer. The 300 beam-position monitors per ring are multiplexed to share 171 processor modules, which use DSPs for recording positions over 1024 turns and for calibration. For diagnostics and machine protection, 100 photomultiplier-based Cherenkov detectors measure beam losses and abort the beam in case of high loss.

  19. Design of Factory Information Monitoring System Via Cloud Computing%基于云计算的工厂信息监测系统设计

    Institute of Scientific and Technical Information of China (English)

    许知博; 刘钊

    2012-01-01

    Factories in manufacturing require efficient monitoring to ensure product quality and production safety,but the traditional distributed model can not manage efficiently and meet the growing production demands.In view of this situation,this paper introduces the cloud computing technology into the factory information monitoring,and proposes a factory information monitoring system design via cloud computing.The design takes full advantages of cloud computing in management and services,improves the management of the factory efficiency,and lowers its operating cost.%制造业中工厂需要高效的监测手段来保证产品质量和生产安全,而传统的分散式模式无法进行高效的管理,不能满足日益增长的生产需求。针对这一状况,文中将云计算技术应用于工厂信息监测中,提出了一种基于云计算的现代化工厂信息监测系统设计。该设计充分利用云计算在管理、服务等方面的优点,提高了工厂的管理效率,节省了工厂的运营成本。

  20. Design Of Experiments For Product And Process Development: An Applicatıon In Food Production Sector

    OpenAIRE

    HASGÜL, Özlem

    2011-01-01

    The aim of this paper is to use of design of experiments to develop products and processes and to contribute to use it more commonly. In this work, the basic principles related to design of experiments is explained and 23 factorial design set up for food production sector has been constructed. After that, products have been cooked on hot own oven under different process conditions to study their effect on product weight.

  1. Nanoemulsions containing a synthetic chalcone as an alternative for treating cutaneous leshmaniasis: optimization using a full factorial design.

    Science.gov (United States)

    de Mattos, Cristiane Bastos; Argenta, Débora Fretes; Melchiades, Gabriela de Lima; Cordeiro, Marlon Norberto Sechini; Tonini, Maiko Luis; Moraes, Milene Hoehr; Weber, Tanara Beatriz; Roman, Silvane Souza; Nunes, Ricardo José; Teixeira, Helder Ferreira; Steindel, Mário; Koester, Letícia Scherer

    2015-01-01

    Nanoemulsions are drug delivery systems that may increase the penetration of lipophilic compounds through the skin, enhancing their topical effect. Chalcones are compounds of low water solubility that have been described as promising molecules for the treatment of cutaneous leishmaniasis (CL). In this context, the aim of this work was to optimize the development of a nanoemulsion containing a synthetic chalcone for CL treatment using a 2(2) full factorial design. The formulations were prepared by spontaneous emulsification and the experimental design studied the influence of two independent variables (type of surfactant - soybean lecithin or sorbitan monooleate and type of co-surfactants - polysorbate 20 or polysorbate 80) on the physicochemical characteristics of the nanoemulsions, as well as on the skin permeation/retention of the synthetic chalcone in porcine skin. In order to evaluate the stability of the systems, the antileishmanial assay was performed against Leishmania amazonensis 24 hours and 60 days after the preparation of the nanoemulsions. The formulation composed of soybean lecithin and polysorbate 20 presented suitable physicochemical characteristics (droplet size 171.9 nm; polydispersity index 0.14; zeta potential -39.43 mV; pH 5.16; and viscosity 2.00 cP), drug content (91.09%) and the highest retention in dermis (3.03 µg·g(-1)) - the main response of interest - confirmed by confocal microscopy. This formulation also presented better stability of leishmanicidal activity in vitro against L. amazonensis amastigote forms (half maximal inhibitory concentration value 0.32±0.05 µM), which confirmed the potential of the nanoemulsion soybean lecithin and polysorbate 20 for CL treatment.

  2. Use of factorial design for evaluation of plasma conditions and comparison of two liquid sample introduction systems for an axially viewed inductively coupled plasma optical emission spectrometer

    Energy Technology Data Exchange (ETDEWEB)

    Trevizan, Lilian C. [Grupo de Analise Instrumental Aplicada, Departamento de Quimica, Universidade Federal de Sao Carlos, Caixa Postal 676, Sao Carlos, SP, 13650-970 (Brazil); Vieira, Edivan C. [Grupo de Analise Instrumental Aplicada, Departamento de Quimica, Universidade Federal de Sao Carlos, Caixa Postal 676, Sao Carlos, SP, 13650-970 (Brazil); Embrapa Pecuaria Sudeste, Sao Carlos, SP (Brazil); Nogueira, Ana Rita A. [Embrapa Pecuaria Sudeste, Sao Carlos, SP (Brazil); Nobrega, Joaquim A. [Grupo de Analise Instrumental Aplicada, Departamento de Quimica, Universidade Federal de Sao Carlos, Caixa Postal 676, Sao Carlos, SP, 13650-970 (Brazil)]. E-mail: djan@terra.com.br

    2005-06-30

    A factorial design was applied to evaluate plasma conditions employing the Mg II 280/Mg I 285 nm intensity ratio in an axially viewed inductively coupled plasma optical emission spectrometer using different sample introduction devices: a concentric or a V-groove nebulizer and a cyclonic or a Sturman-Masters spray chamber. Effects of nebulizer gas flow-rate on Mg II/Mg I ratio were different in each introduction system. Robust conditions were obtained at low nebulizer gas flow-rate when using concentric nebulizer with a cyclonic spray chamber or a concentric nebulizer and a Sturman-Masters spray chamber. However, when using a V-groove nebulizer with a Sturman-Masters spray chamber, Mg II/Mg I ratio increased at high nebulizer gas flow-rates. Recovery experiments for a milk standard reference material diluted in water-soluble tertiary amines in both robust and non-robust conditions indicated that the robust condition was reached at higher nebulizer gas flow-rates and led to better accuracy and precision when using a V-groove nebulizer.

  3. Agglomeration of mesoporous silica by melt and steam granulation. part II: screening of steam granulation process variables using a factorial design.

    Science.gov (United States)

    Vialpando, Monica; Albertini, Beatrice; Passerini, Nadia; Vander Heyden, Yvan; Rombaut, Patrick; Martens, Johan A; Van Den Mooter, Guy

    2013-11-01

    The objectives of this study were to identify the key process parameters during steam granulation of disordered mesoporous silica material Syloid® 244 FP (244) and to compare two different binders: polyvinylpyrrolidone (PVP) K25 and hydroxypropylmethyl cellulose (HPMC). Itraconazole (ITZ) was selected as the model compound for the development of an oral dosage form for enhanced release. Six factors: binder content, steam amount, mixing time, impeller speed, spray pause time, and filler content were investigated using a two-level quarter-fraction factorial design of experiment (DOE) for each binder type. As experimental responses, characteristics correlating to both granules and tablets were selected. Granules prepared from PVP resulted in an overall higher bulk density, granule size, increased flow properties, and better compression and compaction behavior. Although granulation with PVP resulted in the most ITZ to extract from the pores during processing, the premature drug release was less than 5%. The results of the DOE indicate that the risk of extracting the drug from the pores during processing is governed both by the process parameters and the binder properties. Centerpoint replicates of granules prepared with HPMC were highly variable.

  4. Optimization of hydrothermal synthesis of H-ZSM-5 zeolite for dehydration of methanol to dimethyl ether using full factorial design

    Institute of Scientific and Technical Information of China (English)

    Samaneh Hosseini; Majid Taghizadeh; Ali Eliassi

    2012-01-01

    H-ZSM-5 zeolite was synthesized by hydrothermal method.The effects of different synthesis parameters,such as hydrothermal crystallization temperature (170-190 ℃) and Si/Al molar ratio (100-150),on the catalytic performance of the dehydration of methanol to dimethyl ether (DME) over the synthesized H-ZSM-5 zeolite were studied.The catalysts were characterized by N2 adsorption-desorption,XRD,NH3-TPD,TGA/DTA,and SEM techniques.The full factorial design of experiments was applied to the synthesis of H-ZSM-5 zeolite and the effects of synthesis conditions and their interaction on the yield of DME as the response variable were determined.Analysis of variance showed that two variables and their interaction significantly affected the response.According to the experimental results,the optimized catalyst prepared at 170 ℃ with the Si/Al molar ratio of 100 showed the best catalytic performance among the tested H-ZSM-5 zeolite.

  5. Cost Optimal System Identification Experiment Design

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning

    the experiment design are not based on obtained experimental data. Instead the decisions are based on the expected experimental data assumed to be obtained from the measurements, estimated based on prior information and engineering judgement. The design method provides a system identification experiment design...

  6. Adaptive designs for sequential experiments

    Institute of Scientific and Technical Information of China (English)

    林正炎; 张立新

    2003-01-01

    Various adaptive designe have been proposed and applied to clinical trials,bioassay,psycho-physics,etc.Adaptive designs are also useful in high cost engineering trials.More and More people have been paying attention to these desing methods.This paper introduces several broad families of designs,such as the play-the-winner rele,randomized play-the-winner rule and its generalization to the multi-arm case,doubly bi-ased coin adaptive design,Markov chain model.

  7. Phi factory detector requirements

    Energy Technology Data Exchange (ETDEWEB)

    Arisaka, K.; Atac, M.; Berg, R.; Buchanan, C.; Calvette, M.; Khazin, B.; Kinoshita, K.; Muller, T.; Ohshima, T.; Olsen, S.; Park, J.; Santoni, C.; Shirai, J.; Solodov, E.; Thompson, J.; Triggiani, G.; Ueno, K.; Yamamoto, H.; Detector and Simulation Working Group

    1991-08-01

    We identify the experimental problems and the conditions required for successful phi-factory operation, and show the range of detector parameters which, in conjunction with different machine designs, may meet these conditions. We started by considering, comparing and criticizing the Italian and Novosibirsk designs. With this discussion as a background, we defined the apparent experimental problems and detector constraints. In this article we summarize our understanding. (orig./HSI).

  8. 最小低阶混杂混合水平(2γ)2n因子设计的一些结果%Some Results on Minimum Aberration Mixed-level (2γ)2n Factorial Designs

    Institute of Scientific and Technical Information of China (English)

    史成堂; 张丹; 陈宝亭; 李玉凯

    2007-01-01

    Mukerjee and Wu(2001) employed projective geometry theory to find the wordlength pattern of a regular mixed factorial design in terms of its complementary set,but only for the numbers of words of length 3 or 4. In this paper, by introducing a concept of consulting design and based on the connection between factorial design theory and coding theory, we obtain some combinatorial identities that relate the wordlength pattern of a regular mixed-level (2γ)2n factorial design to that of its consulting design. Consequently, a general rule for identifying minimum aberration (2γ)2n factorial designs through their consulting designs is established. It is an improvement and generalization of the related result in Mukerjee and Wu(2001).

  9. Factorial experimental design for the optimization of catalytic degradation of malachite green dye in aqueous solution by Fenton process

    Directory of Open Access Journals (Sweden)

    A. Elhalil

    2016-09-01

    Full Text Available This work focuses on the optimization of the catalytic degradation of malachite green dye (MG by Fenton process “Fe2+/H2O2”. A 24 full factorial experimental design was used to evaluate the effects of four factors considered in the optimization of the oxidative process: concentration of MG (X1, concentration of Fe2+ (X2, concentration of H2O2 (X3 and temperature (X4. Individual and interaction effects of the factors that influenced the percentage of dye degradation were tested. The effect of interactions between the four parameters shows that there is a dependency between concentration of MG and concentration of Fe2+; concentration of Fe2+ and concentration of H2O2, expressed by the great values of the coefficient of interaction. The analysis of variance proved that, the concentration of MG, the concentration of Fe2+ and the concentration of H2O2 have an influence on the catalytic degradation while it is not the case for the temperature. In the optimization, the great dependence between observed and predicted degradation efficiency, the correlation coefficient for the model (R2=0.986 and the important value of F-ratio proved the validity of the model. The optimum degradation efficiency of malachite green was 93.83%, when the operational parameters were malachite green concentration of 10 mg/L, Fe2+ concentration of 10 mM, H2O2 concentration of 25.6 mM and temperature of 40 °C.

  10. Formulation and evaluation of self-emulsifying orlistat tablet to enhance drug release and in vivo performance: factorial design approach.

    Science.gov (United States)

    Gade, Mukund Maruti; Hurkadale, Pramod Jayadevappa

    2016-06-01

    The purpose of the present research work was to formulate, evaluate, and optimize self-emulsifying orlistat tablet to enhance drug release followed by in vivo antiobesity activity in Wistar rats. Initially, the solubility of orlistat was determined in different natural oils, surfactant, and co-surfactants. Self-emulsifying drug delivery system (SEDDS) was prepared by using castor oil, Tween 80, and Capryol PGMC as components. Liquid SEDDS evaluated for globule size and emulsification time. A 3(2) full factorial design was utilized for the optimization purpose. Formulation variables such as quantity of oil (X1) and ratio of surfactant to co-surfactant (X2) were investigated for their effect on globule size and emulsification time. Optimized formulation with minimum globule size was freeze-dried which further compressed into the tablet. Finally, optimized formulation evaluated for the in vitro drug release study followed by weight losing potential in Wistar rats. Globule size and emulsification time for the optimized formulation were found to be 96.4 ± 8.5 nm and 26 ± 4 s, respectively. Fourier transform infra red spectroscopy (FTIR) studies indicated that there was no interaction between drug and excipients. Differential scanning calorimetry (DSC) and X-ray diffraction (XRD) study revealed that there was the conversion of crystalline orlistat to the amorphous form. Orlistat release from the self-emulsifying tablet formulation was faster with higher weight reduction potential in Wistar rats than the marketed formulation. Increased in vitro drug release with considerable in vivo weight loss by self-emulsifying tablet suggests that the SEDDS could serve as potential formulation strategy for orlistat.

  11. Treatment of municipal landfill leachate by catalytic wet air oxidation: Assessment of the role of operating parameters by factorial design.

    Science.gov (United States)

    Anglada, Angela; Urtiaga, Ane; Ortiz, Inmaculada; Mantzavinos, Dionissios; Diamadopoulos, Evan

    2011-08-01

    The wet air oxidation (WAO) of municipal landfill leachate catalyzed by cupric ions and promoted by hydrogen peroxide was investigated. The effect of operating conditions such as WAO treatment time (15-30min), temperature (160-200°C), Cu(2+) concentration (250-750mgL(-1)) and H(2)O(2) concentration (0-1500mgL(-1)) on chemical oxygen demand (COD) removal was investigated by factorial design considering a two-stage, sequential process comprising the heating-up of the reactor and the actual WAO. The leachate, at an initial COD of 4920mgL(-1), was acidified to pH 3 leading to 31% COD decrease presumably due to the coagulation/precipitation of colloidal and other organic matter. During the 45min long heating-up period of the WAO reactor under an inert atmosphere, COD removal values up to 35% (based on the initial COD value) were recorded as a result of the catalytic decomposition of H(2)O(2) to reactive hydroxyl radicals. WAO at 2.5MPa oxygen partial pressure advanced treatment further; for example, 22min of oxidation at 200°C, 250mgL(-1) Cu(2+) and 0-1500mgL(-1) H(2)O(2) resulted in an overall (i.e. including acidification and heating-up) COD reduction of 78%. Amongst the operating variables in question, temperature had the strongest influence on both the heating-up and WAO stages, while H(2)O(2) concentration strongly affected the former and reaction time the latter. Nonetheless, the effects of temperature and H(2)O(2) concentration were found to depend on the concentration levels of catalyst as suggested by the significance of their 3rd order interaction term.

  12. Experimenting with Science Facility Design.

    Science.gov (United States)

    Butterfield, Eric

    1999-01-01

    Discusses the modern school science facility and how computers and teaching methods are changing their design. Issues include power, lighting, and space requirements; funding for planning; architect assessment; materials requirements for work surfaces; and classroom flexibility. (GR)

  13. Tuning Parameters in Heuristics by Using Design of Experiments Methods

    Science.gov (United States)

    Arin, Arif; Rabadi, Ghaith; Unal, Resit

    2010-01-01

    With the growing complexity of today's large scale problems, it has become more difficult to find optimal solutions by using exact mathematical methods. The need to find near-optimal solutions in an acceptable time frame requires heuristic approaches. In many cases, however, most heuristics have several parameters that need to be "tuned" before they can reach good results. The problem then turns into "finding best parameter setting" for the heuristics to solve the problems efficiently and timely. One-Factor-At-a-Time (OFAT) approach for parameter tuning neglects the interactions between parameters. Design of Experiments (DOE) tools can be instead employed to tune the parameters more effectively. In this paper, we seek the best parameter setting for a Genetic Algorithm (GA) to solve the single machine total weighted tardiness problem in which n jobs must be scheduled on a single machine without preemption, and the objective is to minimize the total weighted tardiness. Benchmark instances for the problem are available in the literature. To fine tune the GA parameters in the most efficient way, we compare multiple DOE models including 2-level (2k ) full factorial design, orthogonal array design, central composite design, D-optimal design and signal-to-noise (SIN) ratios. In each DOE method, a mathematical model is created using regression analysis, and solved to obtain the best parameter setting. After verification runs using the tuned parameter setting, the preliminary results for optimal solutions of multiple instances were found efficiently.

  14. Experiment Design and Analysis Guide - Neutronics & Physics

    Energy Technology Data Exchange (ETDEWEB)

    Misti A Lillo

    2014-06-01

    The purpose of this guide is to provide a consistent, standardized approach to performing neutronics/physics analysis for experiments inserted into the Advanced Test Reactor (ATR). This document provides neutronics/physics analysis guidance to support experiment design and analysis needs for experiments irradiated in the ATR. This guide addresses neutronics/physics analysis in support of experiment design, experiment safety, and experiment program objectives and goals. The intent of this guide is to provide a standardized approach for performing typical neutronics/physics analyses. Deviation from this guide is allowed provided that neutronics/physics analysis details are properly documented in an analysis report.

  15. Analysis of the effects of five factors relevant to in vitro chondrogenesis of human mesenchymal stem cells using factorial design and high throughput mRNA-profiling.

    Directory of Open Access Journals (Sweden)

    Rune B Jakobsen

    Full Text Available The in vitro process of chondrogenic differentiation of mesenchymal stem cells for tissue engineering has been shown to require three-dimensional culture along with the addition of differentiation factors to the culture medium. In general, this leads to a phenotype lacking some of the cardinal features of native articular chondrocytes and their extracellular matrix. The factors used vary, but regularly include members of the transforming growth factor β superfamily and dexamethasone, sometimes in conjunction with fibroblast growth factor 2 and insulin-like growth factor 1, however the use of soluble factors to induce chondrogenesis has largely been studied on a single factor basis. In the present study we combined a factorial quality-by-design experiment with high-throughput mRNA profiling of a customized chondrogenesis related gene set as a tool to study in vitro chondrogenesis of human bone marrow derived mesenchymal stem cells in alginate. 48 different conditions of transforming growth factor β 1, 2 and 3, bone morphogenetic protein 2, 4 and 6, dexamethasone, insulin-like growth factor 1, fibroblast growth factor 2 and cell seeding density were included in the experiment. The analysis revealed that the best of the tested differentiation cocktails included transforming growth factor β 1 and dexamethasone. Dexamethasone acted in synergy with transforming growth factor β 1 by increasing many chondrogenic markers while directly downregulating expression of the pro-osteogenic gene osteocalcin. However, all factors beneficial to the expression of desirable hyaline cartilage markers also induced undesirable molecules, indicating that perfect chondrogenic differentiation is not achievable with the current differentiation protocols.

  16. Involving Motion Graphics in Spatial Experience Design

    DEFF Research Database (Denmark)

    Steijn, Arthur

    2013-01-01

    process, and therefore it should be constructed as such. Since the development of the design model has this double focus, I involve design students in design laboratories related to my practice as a teacher in visual communication design and production design. I also reflect on how an initial design...... conceptualization of various design elements in an analysis of the way in which these elements are integrated and used in the creation of particular experiences of space, atmosphere and artistic expression. On the basis of this analysis I present a preliminary construction of a design model including some design...... laboratory may be set-up and used. Finally I describe how this design lab can be used as a method for creating both practical knowledge of the manner in which the design model may be applied in actual design processes, as well as how these processes can be used for pointing out design elements or dimensions...

  17. Design of a Communication Scheme in a Modern Factory in Accordance with the Standard of Industry 4.0

    Science.gov (United States)

    Halenár, Igor; Juhásová, Bohuslava; Juhás, Martin

    2016-12-01

    This article first describes the current state of the problem in the area of communication in modern factories. Next in the article is given a summary of the requirements that must be implemented for the possibility of establishing a compatible and safe communication system. In the final part of the article is given a proposal of communication model suitable for the implementation.

  18. Design of experiments in production engineering

    CERN Document Server

    2016-01-01

    This book covers design of experiments (DoE) applied in production engineering as a combination of manufacturing technology with applied management science. It presents recent research advances and applications of design experiments in production engineering and the chapters cover metal cutting tools, soft computing for modelling and optmization of machining, waterjet machining of high performance ceramics, among others.

  19. Smashing UX design foundations for designing online user experiences

    CERN Document Server

    Allen, Jesmond

    2012-01-01

    The ultimate guide to UX from the world's most popular resource for web designers and developers Smashing Magazine is the world's most popular resource for web designers and developers and with this book, the authors provide the pinnacle resource to becoming savvy with User Experience Design (UX). The authors first provide an overview of UX and chart its rise to becoming a valuable and necessary practice for narrowing the gap between Web sites, applications, and users in order to make a user's experience a happy, easy, and successful one.Examines the essential aspects of User Experience Design

  20. Optimizing ELISAs for precision and robustness using laboratory automation and statistical design of experiments.

    Science.gov (United States)

    Joelsson, Daniel; Moravec, Phil; Troutman, Matthew; Pigeon, Joseph; DePhillips, Pete

    2008-08-20

    Transferring manual ELISAs to automated platforms requires optimizing the assays for each particular robotic platform. These optimization experiments are often time consuming and difficult to perform using a traditional one-factor-at-a-time strategy. In this manuscript we describe the development of an automated process using statistical design of experiments (DOE) to quickly optimize immunoassays for precision and robustness on the Tecan EVO liquid handler. By using fractional factorials and a split-plot design, five incubation time variables and four reagent concentration variables can be optimized in a short period of time.

  1. Design and Development of a Relative Humidity and Room Temperature Measurement System with On Line Data Logging Feature for Monitoring the Fermentation Room of Tea Factory

    Directory of Open Access Journals (Sweden)

    Utpal SARMA

    2011-12-01

    Full Text Available The design and development of a Relative Humidity (RH and Room Temperature (RT monitoring system with on line data logging feature for monitoring fermentation room of a tea factory is presented in this paper. A capacitive RH sensor with on chip signal conditioner is taken as RH sensor and a temperature to digital converter (TDC is used for ambient temperature monitoring. An 8051 core microcontroller is the heart of the whole system which reads the digital equivalent of RH data with the help of a 12-bit Analog to Digital (A/D converter and synchronize TDC to get the ambient temperature. The online data logging is achieved with the help of RS-232C communication. Field performance is also studied by installing it in the fermentation room of a tea factory.

  2. Workspace design for crane cabins applying a combined traditional approach and the Taguchi method for design of experiments.

    Science.gov (United States)

    Spasojević Brkić, Vesna K; Veljković, Zorica A; Golubović, Tamara; Brkić, Aleksandar Dj; Kosić Šotić, Ivana

    2016-01-01

    Procedures in the development process of crane cabins are arbitrary and subjective. Since approximately 42% of incidents in the construction industry are linked to them, there is a need to collect fresh anthropometric data and provide additional recommendations for design. In this paper, dimensioning of the crane cabin interior space was carried out using a sample of 64 crane operators' anthropometric measurements, in the Republic of Serbia, by measuring workspace with 10 parameters using nine measured anthropometric data from each crane operator. This paper applies experiments run via full factorial designs using a combined traditional and Taguchi approach. The experiments indicated which design parameters are influenced by which anthropometric measurements and to what degree. The results are expected to be of use for crane cabin designers and should assist them to design a cabin that may lead to less strenuous sitting postures and fatigue for operators, thus improving safety and accident prevention.

  3. Design and analysis of experiments

    CERN Document Server

    Hinkelmann, Klaus

    This book discusses special modifications and extensions of designs that arise in certain fields of application such as genetics, bioinformatics, agriculture, medicine, manufacturing, marketing, etc. Well-known and highly-regarded contributors have written individual chapters that have been extensively reviewed by the Editor to ensure that each individual contribution relates to material found in Volumes 1 and 2 of this book series. The chapters in Volume 3 have an introductory/historical component and proceed to a more advanced technical level to discuss the latest results and future developm

  4. Design of satellite flexibility experiments

    Science.gov (United States)

    Kaplan, M. H.; Hillard, S. E.

    1977-01-01

    A preliminary study has been completed to begin development of a flight experiment to measure spacecraft control/flexible structure interaction. The work reported consists of two phases: identification of appropriate structural parameters which can be associated with flexibility phenomena, and suggestions for the development of an experiment for a satellite configuration typical of near-future vehicles which are sensitive to such effects. Recommendations are made with respect to the type of data to be collected and instrumentation associated with these data. The approach consists of developing the equations of motion for a vehicle possessing a flexible solar array, then linearizing about some nominal motion of the craft. A set of solutions are assumed for array deflection using a continuous normal mode method and important parameters are exposed. Inflight and ground based measurements are distinguished. Interrelationships between these parameters, measurement techniques, and input requirements are discussed which assure minimization of special vehicle maneuvers and optimization of data to be obtained during the normal flight sequence.

  5. Democratic design experiments: between parliament and laboratory

    DEFF Research Database (Denmark)

    Binder, Thomas; Brandt, Eva; Ehn, Pelle;

    2015-01-01

    been performed and accomplished in participatory practices. In this article we discuss how participatory design may be reinvigorated as a design research programme for democratic design experiments in the light of the de-centring of human-centredness and the foregrounding of collaborative......For more than four decades participatory design has provided exemplars and concepts for understanding the democratic potential of design participation. Despite important impacts on design methodology participatory design has however been stuck in a marginal position as it has wrestled with what has...

  6. Improving Proteome Coverage on a LTQ-Orbitrap Using Design of Experiments

    Science.gov (United States)

    Andrews, Genna L.; Dean, Ralph A.; Hawkridge, Adam M.; Muddiman, David C.

    2011-04-01

    Design of experiments (DOE) was used to determine improved settings for a LTQ-Orbitrap XL to maximize proteome coverage of Saccharomyces cerevisiae. A total of nine instrument parameters were evaluated with the best values affording an increase of approximately 60% in proteome coverage. Utilizing JMP software, 2 DOE screening design tables were generated and used to specify parameter values for instrument methods. DOE 1, a fractional factorial design, required 32 methods fully resolving the investigation of six instrument parameters involving only half the time necessary for a full factorial design of the same resolution. It was advantageous to complete a full factorial design for the analysis of three additional instrument parameters. Measured with a maximum of 1% false discovery rate, protein groups, unique peptides, and spectral counts gauged instrument performance. Randomized triplicate nanoLC-LTQ-Orbitrap XL MS/MS analysis of the S. cerevisiae digest demonstrated that the following five parameters significantly influenced proteome coverage of the sample: (1) maximum ion trap ionization time; (2) monoisotopic precursor selection; (3) number of MS/MS events; (4) capillary temperature; and (5) tube lens voltage. Minimal influence on the proteome coverage was observed for the remaining four parameters (dynamic exclusion duration, resolving power, minimum count threshold to trigger a MS/MS event, and normalized collision energy). The DOE approach represents a time- and cost-effective method for empirically optimizing MS-based proteomics workflows including sample preparation, LC conditions, and multiple instrument platforms.

  7. 新的设计模式——数组工厂和数组原型模式%New design patterns: array factory and array prototype

    Institute of Scientific and Technical Information of China (English)

    彭世康; 周逢权

    2012-01-01

    为了去除程序中的简单开关分支结构,提出了一种新的重构方法——“以数组取代类型码”重构手法.将这种新的重构方法用于重构简单工厂模式,就得到了一种新的软件设计模式——“数组工厂”模式.数组工厂模式适用于实例化某个具体类在软件执行流程的任意时刻只存在一个实体的对象;对于软件执行流程中可以同时存在多个实体的具体类对象的实例化工作,通过改造数组工厂模式,提出了“数组原型”模式.数组工厂和数组原型模式是两种结构优良的创建型设计模式,它们免除了简单工厂方法中的开关分支语句,具有优化代码结构、提高程序执行性能等优点,并且完全符合开放—封闭原则.%A new design pattern named "array factory" was produced when the switch statements in simple factory method were refactored by "replace type code with array". Array factory pattern was applied to instantiate the object that has only one entity in software. Array prototype pattern was proposed for instantiating multiple objects of one class by improving array factory pattern. As two excellent creation patterns, array factory and array prototype patterns not only have almost all the benefits of simple factory pattern, but also eliminate the switch statements, optimize the structure of the program and improve the processing performance of the software, and they meet the open-closed principle.

  8. Eye tracking in user experience design

    CERN Document Server

    Romano Bergstorm, Jennifer

    2014-01-01

    Eye Tracking for User Experience Design explores the many applications of eye tracking to better understand how users view and interact with technology. Ten leading experts in eye tracking discuss how they have taken advantage of this new technology to understand, design, and evaluate user experience. Real-world stories are included from these experts who have used eye tracking during the design and development of products ranging from information websites to immersive games. They also explore recent advances in the technology which tracks how users interact with mobile devices, large-screen displays and video game consoles. Methods for combining eye tracking with other research techniques for a more holistic understanding of the user experience are discussed. This is an invaluable resource to those who want to learn how eye tracking can be used to better understand and design for their users. * Includes highly relevant examples and information for those who perform user research and design interactive experi...

  9. The Ethics of User Experience Design

    DEFF Research Database (Denmark)

    Vistisen, Peter; Jensen, Thessa

    actions to experience the system, and thus deal with the problem. The way these actions are related to the way the user is viewed by the designer, will in this article be discussed with the term empathy as its fulcrum. Empathy has been heralded as the primary skill for the user-centered designer to ensure......-centered design process. Exemplifying the differences and ethical implications for the designer in the interaction with the user through the design of interactive digital systems. Finally the article discusses the need to understand design as a development of empathy for a given user or group of users by giving...... a cased-based overview of how empathy can be achieved during the design process, and become the catalyst of a more ethical approach to designing the user experience of ICT....

  10. The Ethics of User Experience Design

    DEFF Research Database (Denmark)

    Vistisen, Peter; Jensen, Thessa

    2013-01-01

    actions to experience the system, and thus deal with the problem. The way these actions are related to the way the user is viewed by the designer, will in this article be discussed with the term empathy as its fulcrum. Empathy has been heralded as the primary skill for the user-centered designer to ensure......-centered design process. Exemplifying the differences and ethical implications for the designer in the interaction with the user through the design of interactive digital systems. Finally the article discusses the need to understand design as a development of empathy for a given user or group of users by giving...... a cased-based overview of how empathy can be achieved during the design process, and become the catalyst of a more ethical approach to designing the user experience of ICT....

  11. Spaceflight payload design flight experience G-408

    Science.gov (United States)

    Durgin, William W.; Looft, Fred J.; Sacco, Albert, Jr.; Thompson, Robert; Dixon, Anthony G.; Roberti, Dino; Labonte, Robert; Moschini, Larry

    1992-01-01

    Worcester Polytechnic Institute's first payload of spaceflight experiments flew aboard Columbia, STS-40, during June of 1991 and culminated eight years of work by students and faculty. The Get Away Special (GAS) payload was installed on the GAS bridge assembly at the aft end of the cargo bay behind the Spacelab Life Sciences (SLS-1) laboratory. The Experiments were turned on by astronaut signal after reaching orbit and then functioned for 72 hours. Environmental and experimental measurements were recorded on three cassette tapes which, together with zeolite crystals grown on orbit, formed the basis of subsequent analyses. The experiments were developed over a number of years by undergraduate students meeting their project requirements for graduation. The experiments included zeolite crystal growth, fluid behavior, and microgravity acceleration measurement in addition to environmental data acquisition. Preparation also included structural design, thermal design, payload integration, and experiment control. All of the experiments functioned on orbit and the payload system performed within design estimates.

  12. Design of a Communication Scheme in a Modern Factory in Accordance with the Standard of Industry 4.0

    Directory of Open Access Journals (Sweden)

    Halenár Igor

    2016-12-01

    Full Text Available This article first describes the current state of the problem in the area of communication in modern factories. Next in the article is given a summary of the requirements that must be implemented for the possibility of establishing a compatible and safe communication system. In the final part of the article is given a proposal of communication model suitable for the implementation.

  13. Effect of Sericin in [HA/Bioplastic] Composite Composed by 2k Factorial Design Method on Solidification Time and Tensile Strength

    Directory of Open Access Journals (Sweden)

    Alva Edy Tontowi

    2015-10-01

    Full Text Available Synthetic hydroxyapatite has been attractive ceramic for a decade as main material of bonegraft. However, in powder form it was difficult to shape into certain geometry due to its brittleness characteristic. For this, composing it with another biomaterial as a matrix in a proper composition can be a challenging. In the present work, bioplastic (B made of cassava starch was selected as a matrix material and silk sericin (SS extracted from B.mori cocoon was added. Hydroxyapatite was obtained from bovine hydroxyapatite (H. The composite was prepared by mixing of H/B with ratio of 20/80 and 80/20 and sericin of 8% and 16%w/w was blended to form pasta. It was then casted layer by layer (0.1mm and 0.5mm thick into mould with size of 6mm diameter and 3mm deep. The composite component was composed by utilizing 2k Factorial Design Method and selected the highest of diametral tensile strength (DTS. ANOVA was performed to evaluate hypothesis H0 and H1 based upon the sources and two regression models of Y=f(X, that represented solidification time and tensile strength were developed. The result of solidification time model reveals that composite [H80/B20/S16] with 0.1mm layer thickness had the shortest time of 106.36sec and the highest DTS of 3.46MPa. These results were slightly lower than that obtained by experiment i.e. 107sec and 3.88MPa, respectively. Additional sericin twice for this composite gains more significant effect in improving DTS and solidification time compared to that of giving hydroxyapatite.

  14. Parameter Screening and Optimisation for ILP Using Designed Experiments

    Science.gov (United States)

    Srinivasan, Ashwin; Ramakrishnan, Ganesh

    Reports of experiments conducted with an Inductive Logic Programming system rarely describe how specific values of parameters of the system are arrived at when constructing models. Usually, no attempt is made to identify sensitive parameters, and those that are used are often given "factory-supplied" default values, or values obtained from some non-systematic exploratory analysis. The immediate consequence of this is, of course, that it is not clear if better models could have been obtained if some form of parameter selection and optimisation had been performed. Questions follow inevitably on the experiments themselves: specifically, are all algorithms being treated fairly, and is the exploratory phase sufficiently well-defined to allow the experiments to be replicated? In this paper, we investigate the use of parameter selection and optimisation techniques grouped under the study of experimental design. Screening and "response surface" methods determine, in turn, sensitive parameters and good values for these parameters. This combined use of parameter selection and response surface-driven optimisation has a long history of application in industrial engineering, and its role in ILP is investigated using two well-known benchmarks. The results suggest that computational overheads from this preliminary phase are not substantial, and that much can be gained, both on improving system performance and on enabling controlled experimentation, by adopting well-established procedures such as the ones proposed here.

  15. 南京某食品厂废水处理工艺设计%Design of Wastewater Treatment Process for a Food Factory in Nanjing

    Institute of Scientific and Technical Information of China (English)

    陈鸣; 陈森

    2013-01-01

      食品厂废水的成分一般较为复杂,通常包含大量可生物降解的有机物和较高浓度的动植物油。针对食品厂废水的特点,对南京某食品厂的废水处理工程进行了设计与实现,废水处理工艺采用了“混凝沉淀+水解-好氧”工艺,经处理后出水可以达到《污水综合排放标准》(GB8978-1996)中表4一级标准。%The wastewater in food processing factories is generally more complex, which usually contains a large number of biodegradable organic matter and a higher concentration of animal or vegetable oil. According to the characteristics of wastewater in food processing factories, wastewater treatment works are designed and implement⁃ed for a food factory in Nanjing. The wastewater treatment process uses“Coagulation + hydrolysis–aerobic”pro⁃cess, the treated effluent can reach the first grade criteria of Table 4 in“Integrated Wastewater Discharge Stan⁃dard(GB8978-1996)”.

  16. Dimensionality of stress experiences: Factorial structure of the Perceived Stress Questionnaire (PSQ) in a population-based Swedish sample.

    Science.gov (United States)

    Rönnlund, Michael; Vestergren, Peter; Stenling, Andreas; Nilsson, Lars-Göran; Bergdahl, Maud; Bergdahl, Jan

    2015-10-01

    We investigated the factorial structure of the Perceived Stress Questionnaire (PSQ-recent; Levenstein, Prantera, Varvo et al., 1993) in a large (N = 1516; 35-95 years) population-based Swedish sample (Nilsson, Adolfsson, Bäckman et al., 2004; Nilsson, Bäckman, Erngrund et al., 1997). Exploratory principal components analysis (PCA) was conducted on a first, randomly drawn subsample (n = 506). Next, the model based on the PCA was tested in a second sample (n = 505). Finally, a third sample (n = 505) was used to cross-validate the model. Five components were extracted in the PCA (eigenvalue > 1) and labeled "Demands," "Worries/Tension," "Lack of joy," "Conflict," and "Fatigue," respectively. Twenty-one out of the 30 original PSQ items were retained in a confirmatory factor analysis (CFA) model that included the five (first-order) factors and, additionally, a general (second-order) stress factor, not considered in prior models. The model showed reasonable goodness of fit [χ(2)(184) = 511.2, p < 0.001; CFI = 0.904; RMSEA = 0.059; and SRMR = 0.063]. Multigroup confirmatory factor analyses supported the validity of the established model. The results are discussed in relation to prior investigations of the factorial structure of the PSQ. © 2015 Scandinavian Psychological Associations and John Wiley & Sons Ltd.

  17. Design for experience where technology meets design and strategy

    CERN Document Server

    Kim, Jinwoo

    2015-01-01

    Presents a strategic perspective and design methodology that guide the process of developing digital products and services that provide 'real experience' to users. Only when the material experienced runs its course to fulfilment is it then regarded as 'real experience' that is distinctively senseful, evaluated as valuable, and harmoniously related to others. Based on the theoretical background of human experience, the book focuses on these three questions: How can we understand the current dominant designs of digital products and services? What are the user experience factor

  18. Muon colliders and neutrino factories

    Energy Technology Data Exchange (ETDEWEB)

    Geer, S.; /Fermilab

    2010-09-01

    Over the last decade there has been significant progress in developing the concepts and technologies needed to produce, capture and accelerate {Omicron}(10{sup 21}) muons/year. This development prepares the way for a new type of neutrino source (Neutrino Factory) and a new type of very high energy lepton-antilepton collider (Muon Collider). This article reviews the motivation, design and R&D for Neutrino Factories and Muon Colliders.

  19. Muon colliders and neutrino factories

    CERN Document Server

    Geer, S

    2012-01-01

    Over the last decade there has been significant progress in developing the concepts and technologies needed to produce, capture and accelerate O(1021) muons/year. This development prepares the way for a new type of neutrino source (Neutrino Factory) and a new type of very high energy lepton-antilepton collider (Muon Collider). This article reviews the motivation, design and R&D for Neutrino Factories and Muon Colliders.

  20. Bounds on the maximum numbers of clear two-factor interactions for 2(n1+n2)-(k1+k2) fractional factorial split-plot designs

    Institute of Scientific and Technical Information of China (English)

    ZI Xuemin; ZHANG Runchu; LIU Minqian

    2006-01-01

    Fractional factorial split-plot (FFSP) designs have an important value of investigation for their special structures.There are two types of factors in an FFSP design: the whole-plot (WP) factors and sub-plot (SP) factors,which can form three types of two-factor interactions:WP2fi,WS2fi and SP2fi.This paper considers FFSP designs with resolution Ⅲ or Ⅳ under the clear effects criterion.It derives the upper and lower bounds on the maximum numbers of clear WP2fis and WS2fis for FFSP designs,and gives some methods for constructing the desired FFSP designs.It further examines the performance of the construction methods.

  1. Design -|+ Negative emotions for positive experiences

    NARCIS (Netherlands)

    Fokkinga, S.F.

    2015-01-01

    Experience-driven design considers all aspects of a product – its appearance, cultural meaning, functionality, interaction, usability, technology, and indirect consequences of use – with the aim to optimize and orchestrate all these aspects and create the best possible user experience. Since the lat

  2. High-intensity static magnetic field exposure devices for in vitro experiments on biopharmaceutical plant factories in aerospace environments.

    Science.gov (United States)

    Lopresto, Vanni; Merla, Caterina; Pinto, Rosanna; Benvenuto, Eugenio

    2015-08-01

    Three high-intensity static magnetic field (SMF) exposure devices have been designed and realized for application to in vitro experimental research on hairy root cultures, supposed to grow in extreme environments- as those of space aircrafts- for producing biopharmaceutical molecules. The devices allow the exposure at two different levels of induction magnetic (B) field (250 mT and 500 mT) plus sham for blind exposure. The exposure levels can be considered representative of possible B-fields experienced within the habitat of a spacecraft in presence of active magnetic shielding systems. Each device can house a single 85-mm diameter Petri dish. Numerical simulations have been performed to accurately evaluate the B-field distribution in the biological target. Numerical results have been confirmed by measured data, proving that designed setups allows exposure to SMFs with a homogeneity better than 90%. The exposure devices will be employed for experiments scheduled within BIOxTREME research project, funded by the Italian Space Agency (ASI).

  3. Cooperative adaptive cruise control: design and experiments

    NARCIS (Netherlands)

    Naus, G.; Vugts, R.; Ploeg, J.; Molengraft, R. van de; Steinbuch, M.

    2010-01-01

    The design of a CACC system and corresponding experiments are presented. The design targets string stable system behavior, which is assessed using a frequency-domain-based approach. Following this approach, it is shown that the available wireless information enables small inter-vehicle distances, wh

  4. Optimized Experiment Design for Marine Systems Identification

    DEFF Research Database (Denmark)

    Blanke, M.; Knudsen, Morten

    1999-01-01

    Simulation of maneuvring and design of motion controls for marine systems require non-linear mathematical models, which often have more than one-hundred parameters. Model identification is hence an extremely difficult task. This paper discusses experiment design for marine systems identification...

  5. Resourcing of Experience in Co-Design

    DEFF Research Database (Denmark)

    Ylirisku, Salu; Revsbæk, Line; Buur, Jacob

    2017-01-01

    , knowledge to benefit its cultivation is expected to be highly valuable in contemporary multi-cultural design work. This paper approaches the study of the involvement of various stakeholders in design projects through a lens of resourcing experience. Building from G. H. Mead’s pragmatist theory, we devise...

  6. Adaptive Design of Visual Perception Experiments

    Science.gov (United States)

    2010-04-01

    the same treatment type, and the image stimuli within the cells are presented in random order. 2c. Calibrated perception laboratory The...Adaptive design of visual perception experiments John D. O’Connor, Jonathon Hixson US ARMY RDECOM CERDEC NVESD Ft. Belvoir, VA 22060...ABSTRACT Meticulous experimental design may not always prevent confounds from affecting experimental data acquired during visual perception

  7. Cooperative adaptive cruise control: design and experiments

    NARCIS (Netherlands)

    Naus, G.; Vugts, R.; Ploeg, J.; Molengraft, R. van de; Steinbuch, M.

    2010-01-01

    The design of a CACC system and corresponding experiments are presented. The design targets string stable system behavior, which is assessed using a frequency-domain-based approach. Following this approach, it is shown that the available wireless information enables small inter-vehicle distances, wh

  8. Optimization of Automotive Suspension System by Design of Experiments: A Nonderivative Method

    Directory of Open Access Journals (Sweden)

    Anirban C. Mitra

    2016-01-01

    Full Text Available A lot of health issues like low back pain, digestive disorders, and musculoskeletal disorders are caused as a result of the whole body vibrations induced by automobiles. This paper is concerned with the enhancement and optimization of suspension performance by using factorial methods of Design of Experiments, a nonderivative method. It focuses on the optimization of ride comfort and determining the parameters which affect the suspension behavior significantly as per the guidelines stated in ISO 2631-1:1997 standards. A quarter car test rig integrated with a LabVIEW based data acquisition system was developed to understand the real time behavior of a vehicle. In the pilot experiment, only three primary suspension parameters, that is, spring-stiffness, damping, and sprung mass, were considered and the full factorial method was implemented for the purpose of optimization. But the regression analysis of the data obtained rendered a very low goodness of fit which indicated that other parameters are likely to influence the response. Subsequently, steering geometry angles, camber and toe and tire pressure, were included in the design. Fractional factorial method with six factors was implemented to optimize ride comfort. The resultant optimum combination was then verified on the test rig with high correlation.

  9. Mathematical model formation of the process of deriving boric acid from ulexite mineral by full factorial design method

    OpenAIRE

    DURAK, Halil; GENEL, Yasar; BASHIROV, Novruz; KERIMOV, Genber

    2013-01-01

    Ulexite is a sodium calcium boron hydrate used in producing compounds, its chemical formula is Na2O2CaO5B2O3.16H2O, and it superabounds in Turkey. One of the significant boron compounds derived from boron minerals is boric acid. The aim of this study is producing boric acid in the wake of interaction of ulexite with hydrochloric acid solution, and offering an alternative process to producing boric acid by forming the mathematical model of this processing. Full factorial de...

  10. The application of statistically designed experiments to resistance spot welding

    Science.gov (United States)

    Hafley, Robert A.; Hales, Stephen J.

    1991-01-01

    State-of-the-art Resistance Spot Welding (RSW) equipment has the potential to permit realtime monitoring of operations through advances in computerized process control. In order to realize adaptive feedback capabilities, it is necessary to establish correlations among process variables, welder outputs, and weldment properties. The initial step toward achieving this goal must involve assessment of the effect of specific process inputs and the interactions among these variables on spot weld characteristics. This investigation evaluated these effects through the application of a statistically designed experiment to the RSW process. A half-factorial, Taguchi L sub 16 design was used to understand and refine a RSW schedule developed for welding dissimilar aluminum-lithium alloys of different thickness. The baseline schedule had been established previously by traditional trial and error methods based on engineering judgment and one-factor-at-a-time studies. A hierarchy of inputs with respect to each other was established, and the significance of these inputs with respect to experimental noise was determined. Useful insight was gained into the effect of interactions among process variables, particularly with respect to weldment defects. The effects of equipment related changes associated with disassembly and recalibration were also identified. In spite of an apparent decrease in equipment performance, a significant improvement in the maximum strength for defect-free welds compared to the baseline schedule was achieved.

  11. INDOOR THERMAL CONDITION OF FACTORY BUILDING IN BANGLADESH

    Directory of Open Access Journals (Sweden)

    Muhammed Abdullah Al Sayem Khan

    2011-12-01

    Full Text Available Bangladesh is a developing country and has a lot of factories for different products for local use and also export to abroad. Garments industries are one of the top most items of exported items. A huge number of populations are working in garments industries. But these factories are not well designed in sense of the thermal environment. Workers experiences sickness related to indoor environment. The productions of these factories are affected due to employees’ health condition. The research is done in two different methods. One is empirical data collection using thermal data loggers and the other is questionnaire survey on the spots for three factory buildings. The field study was conducted in four different months of the same year during winter and summer period. Expected findings of this research are that the indoor environment is not comfortable for works at day time during summer season. This research will help the factory workers in providing a comfortable thermal environment and also help the employers or factory owners to increase their production margin.

  12. Guidelines for the design and statistical analysis of experiments in papers submitted to ATLA.

    Science.gov (United States)

    Festing, M F

    2001-01-01

    In vitro experiments need to be well designed and correctly analysed if they are to achieve their full potential to replace the use of animals in research. An "experiment" is a procedure for collecting scientific data in order to answer a hypothesis, or to provide material for generating new hypotheses, and differs from a survey because the scientist has control over the treatments that can be applied. Most experiments can be classified into one of a few formal designs, the most common being completely randomised, and randomised block designs. These are quite common with in vitro experiments, which are often replicated in time. Some experiments involve a single independent (treatment) variable, while other "factorial" designs simultaneously vary two or more independent variables, such as drug treatment and cell line. Factorial designs often provide additional information at little extra cost. Experiments need to be carefully planned to avoid bias, be powerful yet simple, provide for a valid statistical analysis and, in some cases, have a wide range of applicability. Virtually all experiments need some sort of statistical analysis in order to take account of biological variation among the experimental subjects. Parametric methods using the t test or analysis of variance are usually more powerful than non-parametric methods, provided the underlying assumptions of normality of the residuals and equal variances are approximately valid. The statistical analyses of data from a completely randomised design, and from a randomised-block design are demonstrated in Appendices 1 and 2, and methods of determining sample size are discussed in Appendix 3. Appendix 4 gives a checklist for authors submitting papers to ATLA.

  13. Tractable Experiment Design via Mathematical Surrogates

    Energy Technology Data Exchange (ETDEWEB)

    Williams, Brian J. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-02-29

    This presentation summarizes the development and implementation of quantitative design criteria motivated by targeted inference objectives for identifying new, potentially expensive computational or physical experiments. The first application is concerned with estimating features of quantities of interest arising from complex computational models, such as quantiles or failure probabilities. A sequential strategy is proposed for iterative refinement of the importance distributions used to efficiently sample the uncertain inputs to the computational model. In the second application, effective use of mathematical surrogates is investigated to help alleviate the analytical and numerical intractability often associated with Bayesian experiment design. This approach allows for the incorporation of prior information into the design process without the need for gross simplification of the design criterion. Illustrative examples of both design problems will be presented as an argument for the relevance of these research problems.

  14. Longitudinal Beam Stability in the SUPER B-FACTORY

    Energy Technology Data Exchange (ETDEWEB)

    Novokhatski, A.; /SLAC; Zobov, M.; /Frascati

    2009-07-06

    We give an overview of wake fields and impedances in a proposed Super B project, which is based on extremely low emittance beams colliding at a large angle with a crab waist transformation. Understanding the effects that wake fields have on the beam is critical for a successful machine operation. We use our combined experience from the operation of the SLAC B-factory and DA{Phi}NE {Phi}-factory to eliminate strong HOM sources and minimize the chamber impedance in the Super B design. Based on a detailed study of the wake fields in this design we have developed a quasi-Green's function for the entire ring that is used to study bunch lengthening and beam stability. In particular, we check the stability threshold using numerical solutions of the Fokker-Plank equation. We also make a comparison of numerical simulations with the bunch lengthening data in the B- factory.

  15. Adaptive design of visual perception experiments

    Science.gov (United States)

    O'Connor, John D.; Hixson, Jonathan; Thomas, James M., Jr.; Peterson, Matthew S.; Parasuraman, Raja

    2010-04-01

    Meticulous experimental design may not always prevent confounds from affecting experimental data acquired during visual perception experiments. Although experimental controls reduce the potential effects of foreseen sources of interference, interaction, or noise, they are not always adequate for preventing the confounding effects of unforeseen forces. Visual perception experimentation is vulnerable to unforeseen confounds because of the nature of the associated cognitive processes involved in the decision task. Some confounds are beyond the control of experimentation, such as what a participant does immediately prior to experimental participation, or the participant's attitude or emotional state. Other confounds may occur through ignorance of practical control methods on the part of the experiment's designer. The authors conducted experiments related to experimental fatigue and initially achieved significant results that were, upon re-examination, attributable to a lack of adequate controls. Re-examination of the original results and the processes and events that led to them yielded a second experimental design with more experimental controls and significantly different results. The authors propose that designers of visual perception experiments can benefit from planning to use a test-fix-test or adaptive experimental design cycle, so that unforeseen confounds in the initial design can be remedied.

  16. Optimal design of isotope labeling experiments.

    Science.gov (United States)

    Yang, Hong; Mandy, Dominic E; Libourel, Igor G L

    2014-01-01

    Stable isotope labeling experiments (ILE) constitute a powerful methodology for estimating metabolic fluxes. An optimal label design for such an experiment is necessary to maximize the precision with which fluxes can be determined. But often, precision gained in the determination of one flux comes at the expense of the precision of other fluxes, and an appropriate label design therefore foremost depends on the question the investigator wants to address. One could liken ILE to shadows that metabolism casts on products. Optimal label design is the placement of the lamp; creating clear shadows for some parts of metabolism and obscuring others.An optimal isotope label design is influenced by: (1) the network structure; (2) the true flux values; (3) the available label measurements; and, (4) commercially available substrates. The first two aspects are dictated by nature and constrain any optimal design. The second two aspects are suitable design parameters. To create an optimal label design, an explicit optimization criterion needs to be formulated. This usually is a property of the flux covariance matrix, which can be augmented by weighting label substrate cost. An optimal design is found by using such a criterion as an objective function for an optimizer. This chapter uses a simple elementary metabolite units (EMU) representation of the TCA cycle to illustrate the process of experimental design of isotope labeled substrates.

  17. Designing (for) experiences in photorealistic VR environments

    Science.gov (United States)

    Carroll, Fiona

    2010-04-01

    This paper investigates the role of aesthetics in the design of "intended" experiences in photorealistic virtual reality (VR) environments. It is motivated by the very notion that the aesthetic potential of photorealistic VR content is, and continues to be, underestimated whilst the emphasis on the development of newer and more efficient visualisation technologies to create new and exciting VR experiences increases. Challenging this, the paper looks beyond the technological (and the more traditional human computer interaction approaches that have primarily focused on the performance and efficiency issues of the technology) in order to explore more human values and the experiential side of VR. It focuses on the design of an "engaged interaction" and in doing so, implements a comparative study to explore how the strategic patterning of the aesthetic elements (particularly colour) within a photorealistic VR environment can allow for the design of a certain experience. In conclusion, the paper demonstrates that aesthetics and the "engaged interaction" can play an important role in getting to the heart of the photorealistic VR "user" experience. It highlights how we might design for (i.e. suggest, coax and guide) an "intended" VR experience.

  18. Tolfenamic acid degradation by direct photolysis and the UV-ABC/H2O2 process: factorial design, kinetics, identification of intermediates, and toxicity evaluation.

    Science.gov (United States)

    de Melo da Silva, Lucas; Pereira Cavalcante, Rodrigo; Fabbro Cunha, Rebeca; Gozzi, Fábio; Falcao Dantas, Renato; de Oliveira, Silvio Cesar; Machulek, Amilcar

    2016-12-15

    This study employed direct UV-ABC photolysis and the UV-ABC/H2O2 process to investigate the degradation of tolfenamic acid (TA), a common anti-inflammatory drug used in both human and veterinary medicine. A 2(3) factorial design with added center point was used to evaluate the effect of three independent variables-namely, H2O2 concentration ([H2O2]), TA concentration ([TA]), and experiment time (time)-on TA degradation and H2O2 photolysis during UV-ABC/H2O2 treatment using a high-pressure mercury vapor lamp (photon flux of 2.6307 × 10(4) J s(-1)) as the UV irradiation source. The responses yielded similar values, revealing a linear behavior, with correlation coefficients R = 0.9968 and Radj = 0.9921 for TA degradation and R = 0.9828 and Radj = 0.9570 for H2O2 photolysis. The most efficient combination of variables was [H2O2] = 255 mg L(-1) and [TA] = 25 mg L(-1), resulting in 100% TA degradation and 98.87% H2O2 photolysis by 90 min of treatment. Additionally, the second-order kinetic constant of the reaction between TA and HO(●) was determined using a competitive kinetic model, employing 2,4-dichlorophenoxyacetic acid (2,4D) as the reference compound. The kinetic constant was 1.9 × 10(10) M(-1) s(-1) in alkaline medium. TA degradation by direct photolysis generated quinone imines as by-products, responsible for the formation of a dark red "internal filter" that increased the value of acute toxicity to Artemia salina. The UV-ABC/H2O2 process did not promote formation of quinone imines by 90 min of treatment and therefore did not increase acute toxicity values. Several by-products generated during TA degradation were identified and possible degradation pathways for the UV-ABC and UV-ABC/H2O2 processes were proposed. Copyright © 2016 Elsevier B.V. All rights reserved.

  19. Design Experiments and the Generation of Theory

    DEFF Research Database (Denmark)

    Nortvig, Anne-Mette

    2014-01-01

    When blended learning is introduced in professional education with strong traditions of physical activities and face-to-face interactions in the classroom, creation of new learning designs is needed both in the classroom and online. While some educators see the implementation of e......-learning and blended learning as an opportunity to innovate and implement design experiments, others try to defend their teaching against changes and the intrusion of technology in the classroom (Hanson, 2009; Könings, Brand-Gruwel, & van Merriënboer, 2007).In this PhD project, an overall Design-based Research...

  20. Uniform design of experiments with mixtures

    Institute of Scientific and Technical Information of China (English)

    王元; 方开泰

    1996-01-01

    Consider a design of experiments with mixtures:0≤ai

  1. Design and Analysis of Simulation Experiments

    NARCIS (Netherlands)

    Kleijnen, Jack P.C.

    2015-01-01

    This is a new edition of Kleijnen’s advanced expository book on statistical methods for the Design and Analysis of Simulation Experiments (DASE). Altogether, this new edition has approximately 50% new material not in the original book. More specifically, the author has made significant changes to

  2. Expressions: Embodiment in the experience of design

    NARCIS (Netherlands)

    Van Rompay, T.J.L.

    2005-01-01

    EXPRESSIONS: EMBODIMENT IN THE EXPERIENCE OF DESIGN Products are not just objects by means of which we get things done. Apart from bringing aesthetic pleasures, for instance, they may also embody values we hold dear, communicate our fine taste to others, and help us define who we are. These widely

  3. Targeting population heterogeneity for optimal cell factories

    DEFF Research Database (Denmark)

    Heins, Anna-Lena; Carlqvist, Magnus; Helmark, S.

    , substrates, and pH are typically observed in many industrial scale fermentation processes. Consequently, the microbial cells experience rapid changes in environmental conditions as they circulate throughout the reactor, which might pose stress on the cells and affect their metabolism and consequently affect...... analysis, and thereby created the possibility to map population heterogeneity. A factorial design with pH, glucose concentration and oxygen level was performed in batch cultivations using the growth reporter strains to evaluate the effect of those environmental factors on heterogeneity level and amount...

  4. Advanced ISDN satellite designs and experiments

    Science.gov (United States)

    Pepin, Gerard R.

    1992-01-01

    The research performed by GTE Government Systems and the University of Colorado in support of the NASA Satellite Communications Applications Research (SCAR) Program is summarized. Two levels of research were undertaken. The first dealt with providing interim services Integrated Services Digital Network (ISDN) satellite (ISIS) capabilities that accented basic rate ISDN with a ground control similar to that of the Advanced Communications Technology Satellite (ACTS). The ISIS Network Model development represents satellite systems like the ACTS orbiting switch. The ultimate aim is to move these ACTS ground control functions on-board the next generation of ISDN communications satellite to provide full-service ISDN satellite (FSIS) capabilities. The technical and operational parameters for the advanced ISDN communications satellite design are obtainable from the simulation of ISIS and FSIS engineering software models of the major subsystems of the ISDN communications satellite architecture. Discrete event simulation experiments would generate data for analysis against NASA SCAR performance measure and the data obtained from the ISDN satellite terminal adapter hardware (ISTA) experiments, also developed in the program. The Basic and Option 1 phases of the program are also described and include the following: literature search, traffic mode, network model, scenario specifications, performance measures definitions, hardware experiment design, hardware experiment development, simulator design, and simulator development.

  5. Conceptual design of Dipole Research Experiment (DREX)

    Science.gov (United States)

    Qingmei, XIAO; Zhibin, WANG; Xiaogang, WANG; Chijie, XIAO; Xiaoyi, YANG; Jinxing, ZHENG

    2017-03-01

    A new terrella-like device for laboratory simulation of inner magnetosphere plasmas, Dipole Research Experiment, is scheduled to be built at the Harbin Institute of Technology (HIT), China, as a major state scientific research facility for space physics studies. It is designed to provide a ground experimental platform to reproduce the inner magnetosphere to simulate the processes of trapping, acceleration, and transport of energetic charged particles restrained in a dipole magnetic field configuration. The scaling relation of hydromagnetism between the laboratory plasma of the device and the geomagnetosphere plasma is applied to resemble geospace processes in the Dipole Research Experiment plasma. Multiple plasma sources, different kinds of coils with specific functions, and advanced diagnostics are designed to be equipped in the facility for multi-functions. The motivation, design criteria for the Dipole Research Experiment experiments and the means applied to generate the plasma of desired parameters in the laboratory are also described. Supported by National Natural Science Foundation of China (Nos. 11505040, 11261140326 and 11405038), China Postdoctoral Science Foundation (Nos. 2016M591518, 2015M570283) and Project Supported by Natural Scientific Research Innovation Foundation in Harbin Institute of Technology (No. 2017008).

  6. Simulator design for advanced ISDN satellite design and experiments

    Science.gov (United States)

    Pepin, Gerald R.

    1992-01-01

    This simulation design task completion report documents the simulation techniques associated with the network models of both the Interim Service ISDN (integrated services digital network) Satellite (ISIS) and the Full Service ISDN Satellite (FSIS) architectures. The ISIS network model design represents satellite systems like the Advanced Communication Technology Satellite (ACTS) orbiting switch. The FSIS architecture, the ultimate aim of this element of the Satellite Communications Applications Research (SCAR) program, moves all control and switching functions on-board the next generation ISDN communication satellite. The technical and operational parameters for the advanced ISDN communications satellite design will be obtained from the simulation of ISIS and FSIS engineering software models for their major subsystems. Discrete events simulation experiments will be performed with these models using various traffic scenarios, design parameters and operational procedures. The data from these simulations will be used to determine the engineering parameters for the advanced ISDN communications satellite.

  7. Design and analysis of numerical experiments

    Energy Technology Data Exchange (ETDEWEB)

    Bowman, K.P.; Sacks, J.; Chang, Yuefang (Univ. of Illinois, Urbana-Champaign (United States))

    1993-05-01

    Calculations with numerical models are often referred to as numerical experiments, by analogy to classical laboratory experiments. Usually, many numerical experiments are carried out to determine the response of a numerical model to variations of internal or external parameters over some range of interest. If individual experiments are inexpensive to carry out, and if the number of independent parameters is small, it may be possible to search the entire parameter space of the model. This is difficult, however, if the dimension of the parameter space is even moderately large or the codes are expensive to run. In this paper methods are presented for the design and analysis of numerical experiments that are especially useful and efficient in multidimensional parameter spaces. The analysis method, which is similar to kriging in the spatial analysis literature, fits a statistical model to the output of the numerical model. As an example, the method is applied to a fully nonlinear, global, equivalent-barotropic dynamical model. The statistical model also provides estimates of the uncertainty of predicted numerical model output, which can provide guidance on where in the parameter space to conduct further experiments, if necessary. The method can provide major improvements in the efficiency with which numerical sensitivity experiments are conducted. 17 refs., 9 figs., 2 tabs.

  8. DS-OPTIMAL DESIGNS FOR STUDYING COMBINATIONS OF CHEMICALS USING MULTIPLE FIXED-RATIO RAY EXPERIMENTS

    Science.gov (United States)

    ABSTRACT Detecting and characterizing interactions among chemicals is an important environmental issue. Traditional factorial designs become infeasible as the number of compounds under study increases. Ray designs, which reduce the amount of experimental effort, can be...

  9. HANARO cooling features: design and experience

    Energy Technology Data Exchange (ETDEWEB)

    Park, Cheol; Chae, Hee-Taek; Han, Gee-Yang; Jun, Byung-Jin; Ahn, Guk-Hoon [HANARO Operating Team, Korea Atomic Energy Research Institute, Taejon (Korea)

    1999-08-01

    In order to achieve the safe core cooling during normal operation and upset conditions, HANARO adopted an upward forced convection cooling system with dual containment arrangements instead of the forced downward flow system popularly used in the majority of forced convection cooling research reactors. This kind of upward flow system was selected by comparing the relative merits of upward and downward flow systems from various points of view such as safety, performance, maintenance. However, several operational matters which were not regarded as serious at design come out during operation. In this paper are presented the design and operational experiences on the unique cooling features of HANARO. (author)

  10. CO2 mitigation by carbon nanotube formation during dry reforming of methane analyzed by factorial design combined with response surface methodology

    Institute of Scientific and Technical Information of China (English)

    Tiago P. Braga; Regina C. R. Santos; Barbara M. C. Sales; Bruno R. da Silva; Antônio N. Pinheiro; Edson R. Leite; Antoninho Valentini

    2014-01-01

    A factorial experimental design was combined with response surface methodology (RSM) to opti-mize the catalyzed CO2 consumption by coke deposition and syngas production during the dry re-forming of CH4. The CH4/CO2 feed ratio and the reaction temperature were chosen as the variables, and the selected responses were CH4 and CO2 conversion, the H2/CO ratio, and coke deposition. The optimal reaction conditions were found to be a CH4/CO2 feed ratio of approximately 3 at 700 °C, producing a large quantity of coke and realizing high CO2 conversion. Furthermore, Raman results showed that the CH4/CO2 ratio and reaction temperature affect the system’s response, particularly the characteristics of the coke produced, which indicates the formation of carbon nanotubes and amorphous carbon.

  11. DESIGN AND EXPERIMENT OF ELECTRIC BUS

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Performance and reliability experiments on BJD-6100EV electric buses, jointly developed by Beijing Institute of Technology and Beijing Public Transport Company, are introduced. Output power model of battery pack is established and maximum output power is analyzed. A permanent magnetic direct current (PMDC) motor with enhanced windings is developed for the bus. Torque-speed characteristics of the motor are modeled and performance of electric bus is analyzed. Computational method of the range of electric bus is proposed and discussed. Experiments show that electric bus can realize design requirements. Computational methods are verified with the help of field test. It is expected that design and computation method will provide helpful reference to development of electric vehicles.

  12. Design calculations for NIF convergent ablator experiments

    Directory of Open Access Journals (Sweden)

    Olson R.E.

    2013-11-01

    Full Text Available The NIF convergent ablation tuning effort is underway. In the early experiments, we have discovered that the design code simulations over-predict the capsule implosion velocity and shock flash ρr, but under-predict the hohlraum x-ray flux measurements. The apparent inconsistency between the x-ray flux and radiography data implies that there are important unexplained aspects of the hohlraum and/or capsule behavior.

  13. Evolvable designs of experiments applications for circuits

    CERN Document Server

    Iordache, Octavian

    2009-01-01

    Adopting a groundbreaking approach, the highly regarded author shows how to design methods for planning increasingly complex experiments. He begins with a brief introduction to standard quality methods and the technology in standard electric circuits. The book then gives numerous examples of how to apply the proposed methodology in a series of real-life case studies. Although these case studies are taken from the printed circuit board industry, the methods are equally applicable to other fields of engineering.

  14. Design calculations for NIF convergent ablator experiments

    OpenAIRE

    Olson R.E.; Hicks D.G.; Meezan N.B.; Callahan D.A.; Landen O.L.; Jones O.S.; Langer S.H.; Kline J.L.; Wilson D.C.; Rinderknecht H.; Zylstra A.; Petrasso R.D.

    2013-01-01

    The NIF convergent ablation tuning effort is underway. In the early experiments, we have discovered that the design code simulations over-predict the capsule implosion velocity and shock flash ρr, but under-predict the hohlraum x-ray flux measurements. The apparent inconsistency between the x-ray flux and radiography data implies that there are important unexplained aspects of the hohlraum and/or capsule behavior.

  15. Influence of the Formulation Parameters on the Particle Size and Encapsulation Efficiency of Resveratrol in PLA and PLA-PEG Blend Nanoparticles: A Factorial Design.

    Science.gov (United States)

    Lindner, Gabriela da Rocha; Dalmolin, Luciana Facco; Khalil, Najeh Maissar; Mainardes, Rubiana Mara

    2015-12-01

    Polymeric nanoparticles are colloidal systems that promote protection and modification of physicochemical characteristics of a drug and that also ensure controlled and extended drug release. This paper reports a 2(3) factorial design study to optimize poly(lactide) (PLA) and poly(lactide)-polyethylene glycol (PLA-PEG) blend nanoparticles containing resveratrol (RVT) for prolonged release. The independent variables analyzed were solvent composition, surfactant concentration and ratio of aqueous to organic phase (two levels each factor). Mean particle size and RVT encapsulation efficiency were set as the dependent variables. The selected optimized parameters were set as organic phase comprised of a mixture of dichloromethane and ethyl acetate, 1% of surfactant polyvinyl alcohol and a 3:1 ratio of aqueous to organic phase, for both PLA and PLA-PEG blend nanoparticles. This formulation originated nanoparticles with size of 228 ± 10 nm and 185 ± 70 nm and RVT encapsulation efficiency of 82 ± 10% and 76 ± 7% for PLA and PLA-PEG blend nanoparticles, respectively. The in vitro release study showed a biphasic pattern with prolonged RVT release and PEG did not influence the RVT release. The in vitro release data were in favor of Higuchi-diffusion kinetics for both nanoformulations and the Kossmeyer-Peppas coefficient indicated that anomalous transport was the main release mechanism of RVT. PLA and PLA-PEG blend nanoparticles produced with single emulsion-solvent evaporation technology were found to be a promising approach for the incorporation of RVT and promoted its controlled release. The factorial design is a tool of great value in choosing formulations with optimized parameters.

  16. Identification of Analytical Factors Affecting Complex Proteomics Profiles Acquired in a Factorial Design Study with Analysis of Variance: Simultaneous Component Analysis.

    Science.gov (United States)

    Mitra, Vikram; Govorukhina, Natalia; Zwanenburg, Gooitzen; Hoefsloot, Huub; Westra, Inge; Smilde, Age; Reijmers, Theo; van der Zee, Ate G J; Suits, Frank; Bischoff, Rainer; Horvatovich, Péter

    2016-04-19

    Complex shotgun proteomics peptide profiles obtained in quantitative differential protein expression studies, such as in biomarker discovery, may be affected by multiple experimental factors. These preanalytical factors may affect the measured protein abundances which in turn influence the outcome of the associated statistical analysis and validation. It is therefore important to determine which factors influence the abundance of peptides in a complex proteomics experiment and to identify those peptides that are most influenced by these factors. In the current study we analyzed depleted human serum samples to evaluate experimental factors that may influence the resulting peptide profile such as the residence time in the autosampler at 4 °C, stopping or not stopping the trypsin digestion with acid, the type of blood collection tube, different hemolysis levels, differences in clotting times, the number of freeze-thaw cycles, and different trypsin/protein ratios. To this end we used a two-level fractional factorial design of resolution IV (2(IV)(7-3)). The design required analysis of 16 samples in which the main effects were not confounded by two-factor interactions. Data preprocessing using the Threshold Avoiding Proteomics Pipeline (Suits, F.; Hoekman, B.; Rosenling, T.; Bischoff, R.; Horvatovich, P. Anal. Chem. 2011, 83, 7786-7794, ref 1) produced a data-matrix containing quantitative information on 2,559 peaks. The intensity of the peaks was log-transformed, and peaks having intensities of a low t-test significance (p-value > 0.05) and a low absolute fold ratio (factor were removed. The remaining peaks were subjected to analysis of variance (ANOVA)-simultaneous component analysis (ASCA). Permutation tests were used to identify which of the preanalytical factors influenced the abundance of the measured peptides most significantly. The most important preanalytical factors affecting peptide intensity were (1) the hemolysis level, (2) stopping trypsin digestion with

  17. The effect of heterogeneous variance on efficiency and power of cluster randomized trials with a balanced 2 × 2 factorial design.

    Science.gov (United States)

    Lemme, Francesca; van Breukelen, Gerard J P; Candel, Math J J M; Berger, Martijn P F

    2015-10-01

    Sample size calculation for cluster randomized trials (CRTs) with a [Formula: see text] factorial design is complicated due to the combination of nesting (of individuals within clusters) with crossing (of two treatments). Typically, clusters and individuals are allocated across treatment conditions in a balanced fashion, which is optimal under homogeneity of variance. However, the variance is likely to be heterogeneous if there is a treatment effect. An unbalanced allocation is then more efficient, but impractical because the optimal allocation depends on the unknown variances. Focusing on CRTs with a [Formula: see text] design, this paper addresses two questions: How much efficiency is lost by having a balanced design when the outcome variance is heterogeneous? How large must the sample size be for a balanced allocation to have sufficient power under heterogeneity of variance? We consider different scenarios of heterogeneous variance. Within each scenario, we determine the relative efficiency of a balanced design, as a function of the level (cluster, individual, both) and amount of heterogeneity of the variance. We then provide a simple correction of the sample size for the loss of power due to heterogeneity of variance when a balanced allocation is used. The theory is illustrated with an example of a published 2 x2 CRT.

  18. The Walking Interventions Through Texting (WalkIT) Trial: Rationale, Design, and Protocol for a Factorial Randomized Controlled Trial of Adaptive Interventions for Overweight and Obese, Inactive Adults.

    Science.gov (United States)

    Hurley, Jane C; Hollingshead, Kevin E; Todd, Michael; Jarrett, Catherine L; Tucker, Wesley J; Angadi, Siddhartha S; Adams, Marc A

    2015-09-11

    the first studies focusing on the individual components of combined goal setting and reward structures in a factorial design to increase walking. The trial is expected to produce results useful to future research interventions and perhaps industry initiatives, primarily focused on mHealth, goal setting, and those looking to promote behavior change through performance-based incentives. ClinicalTrials.gov NCT02053259; https://clinicaltrials.gov/ct2/show/NCT02053259 (Archived by WebCite at http://www.webcitation.org/6b65xLvmg).

  19. Factorial design analysis on the solubility of total mercury in reduction process = Análise do processo experimental na solubilidade do mercúrio total em processo redutivo

    Directory of Open Access Journals (Sweden)

    Raquel Dalla Costa

    2007-07-01

    Full Text Available The dental wastewater can contribute to the total daily mercury load on the environment. Factorial design of experiments is useful to analyze factors that influence this solubility. The aim of the present study was to design experiments to examine the effects ofoperational variables, humic acid, temperature, pH and contact time that may affect the solubility of total mercury as dental amalgam residue in reduction process. Based on the factorial design of experiments, the humic acid concentration was the most significant factor in this process, followed by other factors. The parameters affecting the solubility of total mercury showed that when the [HA], T and CT increases and pH decreases there is an important increase of total mercury concentration in process. For the tested conditions, thehigh total mercury concentration was obtained using the humic acid concentration = 1.0 g L-1, temperature = 35oC, pH = 4.0 and contact time = 10 days.O esgoto odontológico pode contribuir na carga total de mercúrio noambiente. O estudo do planejamento experimental é útil para analisar os fatores que influenciam nesta solubilidade. O objetivo deste trabalho foi realizar um planejamento experimental para analisar os efeitos das variáveis operacionais, ácido húmico, temperatura,pH e tempo de contato, que podem afetar a solubilidade do mercúrio total como amálgama odontológico em um processo de redução. Baseado no planejamento experimental, a concentração de ácido húmico foi o fator mais significativo no processo, seguido dos demais fatores. Os parâmetros que afetam a solubilidade do mercúrio total mostram que quando a [AH], T e TC aumentam e o pH diminui há um aumento significativo na concentração de mercúrio total no processo. A maior concentração de mercúrio total foi obtido nas condições de concentração de ácido húmico = 1,0 g L-1, temperatura = 35oC, pH = 4,0 e tempo de contato = 10 dias.

  20. Did factory girls make bad mothers? Women's labor market experience, motherhood, and children's mortality risks in the past.

    Science.gov (United States)

    Janssens, Angélique; Pelzer, Ben

    2012-01-01

    Prior research has suggested that the quality of maternal care given to infants and small children plays an important role in the strong clustering of children's deaths. In this article, we investigate the quality of maternal care provided by those women who most nineteenth-century social commentators declared would never make good housewives or mothers: the young girls and women working in textile mills. We carried out this examination using an analysis of children's mortality risks in two textile cities in The Netherlands between roughly 1900 and 1930. Our analysis suggests that these children's clustered mortality risks cannot have resulted from either their mothers' labor market experience or biological or genetic factors.

  1. Charged Particle Optics in Circular Higgs Factory

    Energy Technology Data Exchange (ETDEWEB)

    Cai, Yunhai [SLAC National Accelerator Lab., Menlo Park, CA (United States)

    2015-02-26

    Similar to a super B-factory, a circular Higgs factory will require strong focusing systems near the interaction points and a low-emittance lattice in arcs to achieve a factory luminosity. At electron beam energy of 120 GeV, beamstrahlung effects during the collision pose an additional challenge to the collider design. In particular, a large momentum acceptance at 2 percent level is necessary to retain an adequate beam lifetime. This turns out to be the most challenging aspect in the design of circular Higgs factory. In this paper, an example will be provided to illustrate the beam dynamics in circular Higgs factory, emphasizing on the chromatic optics. Basic optical modules and advanced analysis will be presented. Most important, we will show that 2% momentum aperture is achievable

  2. USED OF JABUTICABA (Plinia sp. PEEL AS AN ADSORBENT TO REMOVAL OF CHROMIUN (VI FROM AQUEOUS SOLUTION: DESIGN FACTORIAL, KINETIC AND EQUILIBRIUM STUDY

    Directory of Open Access Journals (Sweden)

    Rafaéla Candido Oliveira da Silva

    2012-07-01

    Full Text Available The objective of this study was to evaluate the ability of removing ions Chromium (VI an aqueous synthetic through the adsorption process using Jabuticaba (Plinia sp. peel. This experiment was performed a 23 factorial experiment with triplicate central point in order to determine the best conditions of the adsorption process. The input variables used to evaluate were: amount of adsorbent (0.1 – 0.5 g initial pH (5.0 – 6.0 and time of the experiment (5 – 10 minutes. The dependent variable used is the efficient removal of ions (%. The highest efficiency in this study was observed with higher pH and lower sorbent and the experimental period with a value of 54%. Kinetic studies evidenced the maximum adsorption, which was obtained from 5 to 10 minutes, reached its maximum capacity saturation, with two phases, an initial phase (fast contributes significantly to the uptake equilibrium phase and a slower negligible. In the balance studies, the Langmuir model was the best fit to experimental data jabuticaba biomass, being the maximum amount of adsorption of 174.16 mg g-1.

  3. 关于因析设计混杂度量的研究进展%Research Progress on Confounding Measure of Factorial Design

    Institute of Scientific and Technical Information of China (English)

    林金官; 陈雪平

    2014-01-01

    对因析设计在混杂度量方面的前沿研究进行了回顾,包括二水平正规设计的最大分辨度准则和最小低阶混杂准则,二水平非正规设计的J值,素数幂情形时的最小杂合准则,以及混合水平时的广义最小低阶混杂准则,另外也包括一般最小低阶混杂准则和基于矩阵像的混杂度量准则。%The paper has reviewed frontier research on confounding measure of factorial design including max-imal resolution criterion and minimal low-level confounding criterion of two-level formal design, value J of two-level informal design, minimal heterozygosis criterion in the condition of prime power, and generalized minimal low-level confounding criterion in the condition of mix level; moreover, it also includes general mini-mal low-level confounding criterion and confounding measure criterion based on matrix image.

  4. Advanced Reactor Fuels Irradiation Experiment Design Objectives

    Energy Technology Data Exchange (ETDEWEB)

    Chichester, Heather Jean MacLean [Idaho National Lab. (INL), Idaho Falls, ID (United States); Hayes, Steven Lowe [Idaho National Lab. (INL), Idaho Falls, ID (United States); Dempsey, Douglas [Idaho National Lab. (INL), Idaho Falls, ID (United States); Harp, Jason Michael [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-09-01

    This report summarizes the objectives of the current irradiation testing activities being undertaken by the Advanced Fuels Campaign relative to supporting the development and demonstration of innovative design features for metallic fuels in order to realize reliable performance to ultra-high burnups. The AFC-3 and AFC-4 test series are nearing completion; the experiments in this test series that have been completed or are in progress are reviewed and the objectives and test matrices for the final experiments in these two series are defined. The objectives, testing strategy, and test parameters associated with a future AFC test series, AFC-5, are documented. Finally, the future intersections and/or synergies of the AFC irradiation testing program with those of the TREAT transient testing program, emerging needs of proposed Versatile Test Reactor concepts, and the Joint Fuel Cycle Study program’s Integrated Recycle Test are discussed.

  5. Custom fractional factorial designs to develop atorvastatin self-nanoemulsifying and nanosuspension delivery systems--enhancement of oral bioavailability

    National Research Council Canada - National Science Library

    Hashem, Fahima M; Al-Sawahli, Majid M; Nasr, Mohamed; Ahmed, Osama A A

    2015-01-01

    ...) and solid nanosuspensions (NS) in order to enhance the oral delivery of atorvastatin (ATR). According to the design, 14 experimental runs of ATR SNEDDS were formulated utilizing the highly ATR solubilizing SNEDDS components...

  6. Carbon Pricing: Design, Experiences and Issues

    DEFF Research Database (Denmark)

    Carbon Pricing reflects upon and further develops the ongoing and worthwhile global debate into how to design carbon pricing, and how to utilize the financial proceeds in the best possible way for society. The world has recently witnessed a significant downward adjustment in fossil fuel prices...... the consequential outcomes of different taxation compositions as regulatory instruments. Expert contributors assess a variety of national experiences to provide an empirical insight into the use of carbon taxes, emissions trading, energy taxes and excise taxes. The overarching discussion concludes that successful...

  7. Design of Experiments for Food Engineering

    OpenAIRE

    Pedersen, Søren Juhl; Frosch, Stina; Kulahci, Murat; Geoffrey Vining, G.

    2015-01-01

    This work looks at the application of Design of Experiments (DoE) to Food Engineering (FE) problems in relation to quality. The field of Quality Engineering (QE) is a natural partnering field for FE due to the extensive developments that QE has had in using DoE for quality improvement especially in manufacturing industries. In the thesis the concepts concerning food quality is addressed and in addition how QE proposes to define quality. There is seen a merger in how QE’s definition of quality...

  8. Quantifying second generation ethanol inhibition: Design of Experiments approach and kinetic model development.

    Science.gov (United States)

    Schneiderman, Steven J; Johnson, Roger W; Menkhaus, Todd J; Gilcrease, Patrick C

    2015-03-01

    While softwoods represent a potential feedstock for second generation ethanol production, compounds present in their hydrolysates can inhibit fermentation. In this study, a novel Design of Experiments (DoE) approach was used to identify significant inhibitory effects on Saccharomyces cerevisiae D5A for the purpose of guiding kinetic model development. Although acetic acid, furfural and 5-hydroxymethyl furfural (HMF) were present at potentially inhibitory levels, initial factorial experiments only identified ethanol as a significant rate inhibitor. It was hypothesized that high ethanol levels masked the effects of other inhibitors, and a subsequent factorial design without ethanol found significant effects for all other compounds. When these non-ethanol effects were accounted for in the kinetic model, R¯(2) was significantly improved over an ethanol-inhibition only model (R¯(2)=0.80 vs. 0.76). In conclusion, when ethanol masking effects are removed, DoE is a valuable tool to identify significant non-ethanol inhibitors and guide kinetic model development.

  9. Designing Technology for Active Spectator Experiences at Sporting Events

    DEFF Research Database (Denmark)

    Veerasawmy, Rune; Ludvigsen, Martin

    2010-01-01

    behaviour in the context. The work presented also argues for a need to overcome the inclination to designing technological systems that imitate or compete with the experience of watching the television broadcast of the game. Experiments such as the presented BannerBattle are cornerstones in our exploratory......This paper explores the active spectator experience at sporting events, by presenting and reflecting upon a design experiment carried out at a number of football1 events. The initial hypothesis of the design process, leading to the design experiment has been that the spectator experience...... research-through-design approach to designing technologies for social experiences....

  10. Microbial colonisation of sterilised soils across a pH gradient in a full factorial re-inoculation experiment

    Science.gov (United States)

    Barcenas Moreno, Gema; Bååth, Erland; Rousk, Johannes

    2015-04-01

    We compared the influence of community and environmental conditions for the functioning (fungal and bacterial growth and respiration) and trait distribution (bacterial pH-tolerance) of soil microorganisms across a pH gradient. A reciprocal inoculation experiment, including pHs 4.1, 5.2, 6.7, and 8.3, was used. Sterilised soil microcosms with added plant material were inoculated with fresh soil (communities) and monitored for two months. Respiration was dominated by bacteria at high and by fungi at low pHs. The bacterial pH-tolerance of all inoculated communities (initial trait distribution) converged with the pH of the soil (environment). There were also differences between inocula, resulting in suboptimal pH-tolerance when the inoculum pH did not correspond to soil pH; low pH inocula had lower than optimal pH-tolerance in high pH soils and vice versa. Bacterial communities misaligned to their environment had impaired functioning (growth in all soils and respiration in high pH soils). The inoculum effect on bacterial pH tolerance and functioning could be detected within one week and remained for two months. Fungal communities emanating from low pH inocula consistently resulted in higher fungal growth and biomass (all soils) and respiration (low pH soils). This suggested that variation in fungal pH-tolerance did not influence their performance, in contrast with bacteria. It is likely that a larger fungal sample in low pH inocula explained these results. Consequently, respiration was characterised by the alignment of the bacterial trait distribution to the environment for high pH soils, while it was characterised by larger fungal inoculum for low pH soils.

  11. Everyday life; Lived Experiences and Designed Learning

    DEFF Research Database (Denmark)

    Vestbo, Michelle; Helms, Niels Henrik; Dræbel, Tania Aase

    2016-01-01

    Everyday life; Lived Experiences and Designed Learning: Students knowledge cultures and epistemic trajectories in a range of professional bachelor educations Helms, N.H., Vestbo, M., Steenfeldt, V.O., Dræbel, T.A., Hansen, T.A.E., Storm, H., and Schmidt, L.S.K. (University College Zealand) In thi...... contributes to knowledge about how students translate and transform knowledge in various ways and how they establish professional competencies and identities and about the potential coherence between portfolio pedagogies and other educational activities.......Everyday life; Lived Experiences and Designed Learning: Students knowledge cultures and epistemic trajectories in a range of professional bachelor educations Helms, N.H., Vestbo, M., Steenfeldt, V.O., Dræbel, T.A., Hansen, T.A.E., Storm, H., and Schmidt, L.S.K. (University College Zealand......) In this panel the use of different methodological approaches to answer questions about students’ knowledge cultures and epistemic trajectories is discussed. The context is qualitative empirical educational studies in a range of professional bachelor educations; Nursing, Social Education and Nutrition and Health...

  12. Application of factorial design to the study of xylitol production from corncob hemicellulose hydrolysate by Candida guilliermondii

    Directory of Open Access Journals (Sweden)

    Ramesh S*

    2012-08-01

    Full Text Available Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Optimization of the culture medium and process variables for xylitol production from corncob hemicelluloses hydrolysate was carried out using Candida guillermondii (NCIM 3124. The optimization was performed with statistical methodology based on experimental designs. The screening of nine nutrients for their influence on xylitol production was achieved using a Plackett-Burman design. The four selected components were optimized with Box-Behnken design using response surface methodology (RSM. The optimum level (g/l is: MgSO4.7H2O- 1.34, yeast extract- 4.34, KH2PO4- 2.94 and xylose- 9.49 and influence of various process variables on the xylitol production was evaluated. The optimal levels were quantified by the central composite design using RSM. The optimum level of process variables are: temperature (29.88 oC, substrate concentration (3.26 g/l, pH (7.25, agitation speed (170.42 rpm, inoculum size (3.41 ml. These conditions were validated experimentally which revealed an enhanced xylitol yield of 0.73 g/g.

  13. A review of the efficacy of fixed-dose combinations olmesartan medoxomil/hydrochlorothiazide and amlodipine besylate/benazepril in factorial design studies.

    Science.gov (United States)

    Quan, Allen; Chavanu, Kathleen; Merkel, Jennifer

    2006-01-01

    In order to adequately control hypertension, the majority of patients will require treatment with more than one antihypertensive agent. Fixed-dose combination therapy offers several advantages, including improved efficacy, tolerability, and treatment compliance. Certain combinations have benefits in specific patient populations, such as the elderly or those with comorbidities. In this review, we evaluate the BP-lowering efficacy of olmesartan medoxomil/hydrochlorothiazide (HCTZ) and amlodipine besylate/benazepril in similarly designed, randomized, placebo-controlled studies in similar patient populations. This indirect comparison showed that both combinations significantly improve both systolic and diastolic BP compared with monotherapy with the individual agents or placebo; it also demonstrated that the combinations were well tolerated. Both combination therapies significantly improved response rates, but olmesartan medoxomil/HCTZ achieved the highest control rates compared with the individual agents. On the basis of an indirect comparison of published factorial design studies, olmesartan medoxomil/HCTZ appears to be at least as effective as amlodipine besylate/benazepril and may provide quantitatively greater reductions in diastolic BP at commonly used dosages. A randomized clinical trial comparing the two combinations is needed to confirm these findings.

  14. Determination of nickel in food samples by flame atomic absorption spectroscopy after preconcentration and microextraction based ionic liquids using full factorial and central composite design.

    Science.gov (United States)

    Zarei, Zohre; Shemirani, Farzaneh

    2012-12-01

    In this research, a microextraction technique based on ionic liquids (ILs) termed in situ solvent formation microextraction (ISFME) was used for determination of nickel in solutions. 1-(2-pyridylazo)-2-naphtol (PAN) was chosen as a complexing agent. After preconcentration, the settled IL-phase was dissolved in 50 μL of ethanol and aspirated into the flame atomic absorption spectrometer (FAAS) using a home-made microsample introduction system. Injection of 50 μL volumes of analyte into an air-acetylene flame provided very sensitive spike-like and reproducible signals. ISFME is based on phase separation phenomenon of ionic liquids in aqueous solutions. This method is simple and rapid for extraction and preconcentration of metal ions from food samples and can be applied for the sample solutions containing very high concentrations of salt. Furthermore, this technique is much safer in comparison with the organic solvent extraction because of using ionic liquid. The effective parameters such as amount of IL, salt effect, concentration of the chelating agent and ion pairing agent were inspected by a full factorial design to identify important parameters and their interactions. Next, a central composite design was applied to obtain optimum point of the important parameters. Under the optimum conditions, the calibration graph was linear over the range of 2 to 80 ng/mL. The limit of detection and relative standard deviation (n= 6) were 0.6 ng/mL and 2%, respectively.

  15. Large utility boilers: experience and design trends

    Energy Technology Data Exchange (ETDEWEB)

    Davis, C.M.; Haller, K.H.; Wiener, M.

    1976-01-01

    The 1960s were characterized by heavy emphasis on the supercritical cycle and a rapid escalation of utility boiler size. Since the units now in operation were designed, several important changes have caused drastic turns in boiler development. The 2400-lb/in./sup 2/ single-reheat, 1000/sup 0/F/1000/sup 0/F cycle regained importance. The present trend is toward natural circulation because it is the simplest, the most efficient, and the most reliable method of furnace wall cooling. With the emphasis on energy self-sufficiency, coal became the dominant boiler fuel. A great deal of uncertainty exists regarding future development of load growth, fossil to nuclear split, environmental regulations, availability of fuel and availability of capital for new construction. These factors are shaping the trends that we see: the utilization of all available coal sources, including very-low-grade coals, the design of units for a wide range of coals, the design for greater operating flexibility, and placement of heavy emphasis on reliability. Based on the good experience with recent large B and W coal-fired boilers, the even greater conservatism applied to new large, coal-fired boilers should provide the capability for continued good performance and high availability.

  16. Emprego do modelo superparametrizado em experiemento fatorial desbalanceado com dois fatores Overparameterized model for an unbalanced factorial experiment with two factors

    Directory of Open Access Journals (Sweden)

    Eliana Mara Manso

    2006-04-01

    ça de efeitos médios do fator B e da interação.In agricultural research it is common to study simultaneously various factors and natural loss of observations frequently leads to unbalanced experiments. Thus it is necessary to know which hypothesis can be tested in the statistical systems. In a missing cells scenario the interpretation is even more complex. In general, the hypothesis on main effects of one of these factors contains the main effects of other factors and of effects of interactions. The aim of this work is to develop ANOVA schemes for the overparameterized model to unbalanced data and, or with situations with missing cells. Additionally we call attention to correct identification and interpretation of the hypothesis associated with the four types of sum of squares given by SAS-GLM procedure. Two distinct cases were analyzed, namely: using data referring to commercial weight of carrots, arising from a completely randomized experiment and, using a factorial design with two planting factors (cultivation and the phasis of the moon. We conclude that the estimable functions of a factor involves a linear combination of both main effects and interaction parameters for both Type III and Type IV Sum of Squares. The order of the main effects changes type I Sum of Squares. Thus, when there are missing cells in the two-factor model, the four types of sum of square for main effects are different and the order is fundamental to obtain the correct type I hypothesis. When missing cells happens, the identification of the estimable functions is more complex and the hypotheses are difficult to interpret. In the estimable functions for interaction, interaction parameters appears as expected. In this case, differences between levels of one main effect factor can only be estimated in the presence of average effects due to the other factor B and the interaction.

  17. Using ProModel as a simulation tools to assist plant layout design and planning: Case study plastic packaging factory

    Directory of Open Access Journals (Sweden)

    Pochamarn Tearwattanarattikal

    2008-01-01

    Full Text Available This study is about the application of a Simulation Model to assist decision making on expanding capacity and plant layout design and planning. The plant layout design concept is performed first to create the physical layouts then the simulation model used to test the capability of plant to meet various demand forecast scena. The study employed ProModel package as a tool, using the model to compare the performances in term of % utilization, characteristics of WIP and ability to meet due date. The verification and validation stages were perform before running the scenarios. The model runs daily production and then the capacity constraint resources defined by % utilization. The expanding capacity policy can be extra shift-working hours or increasing the number of machines. After expanding capacity solutions are found, the physical layout is selected based on the criterion of space available for WIP and easy flow of material.

  18. RELOCATION OF HOME APPLIANCES FACTORY BY USING SYSTEMATICAL LAYOUT PLANNING (SLP COMBINED WITH FLOW ANALYSIS AND ASSEMBLY PROCESS DESIGN

    Directory of Open Access Journals (Sweden)

    Yosef Adji Baskoro

    2011-12-01

    Full Text Available Every manufacturing company must have experiencing building a layout. Fred.E Meyers has stated that only death and taxes are certain, there exist a third certainty-a plant layout will change, thus many methods to generate layout are established and each has its own purposes and benefits. This research focused on the design of manufacturing facilities supported by in-depth analysis of Assembly process design with a high stresses on the Systematical Layout Planning ( SLP and Flow Analysis method to facilitate an outcome of layout accordingly to the system needs. This is a real case study conducts with an objective of generating a recommendation layout for Home Appliances Company specifically for television plant

  19. RELOCATION OF HOME APPLIANCES FACTORY BY USING SYSTEMATICAL LAYOUT PLANNING (SLP COMBINED WITH FLOW ANALYSIS AND ASSEMBLY PROCESS DESIGN

    Directory of Open Access Journals (Sweden)

    Yosef Adji Baskoro

    2011-12-01

    Full Text Available Every manufacturing company must have experiencing building a layout. Fred.E Meyers has stated that only death and taxes are certain, there exist a third certainty-a plant layout will change, thus many methods to generate layout are established and each has its own purposes and benefits. This research focused on the design of manufacturing facilities supported by in-depth analysis of Assembly process design with a high stresses on the Systematical Layout Planning ( SLP and Flow Analysis method to facilitate an outcome of layout accordingly to the system needs. This is a real case study conducts with an objective of generating a recommendation layout for Home Appliances Company specifically for television plant.

  20. Judgement post-stratification for designed experiments.

    Science.gov (United States)

    Du, Juan; MacEachern, Steven N

    2008-06-01

    In many scientific studies, information that is not easily translated into covariates is ignored in the analysis. However, this type of information may significantly improve inference. In this research, we apply the idea of judgment post-stratification to utilize such information. Specifically, we consider experiments that are conducted under a completely randomized design. Sets of experimental units are formed, and the units in a set are ranked. Estimation is performed conditional on the sets and ranks. We propose a new estimator for a treatment contrast. We improve the new estimator by Rao-Blackwellization. Asymptotic distribution theory and corresponding inferential procedures for both estimators are developed. Simulation studies quantify the superiority of the new estimators and show their desirable properties for small and moderate sample sizes. The impact of the new techniques is illustrated with data from a clinical trial.

  1. Design of Experiments for Food Engineering

    DEFF Research Database (Denmark)

    Pedersen, Søren Juhl; Geoffrey Vining, G.

    in manufacturing industries. In the thesis the concepts concerning food quality is addressed and in addition how QE proposes to define quality. There is seen a merger in how QE’s definition of quality has been translated for food. At the same time within FE a divergence has been proposed in the literature...... emphasizing mechanistic modelling over empirical methods. This thesis proposes that this divergence is based on a misunderstanding of what empirical methods entail. The misunderstanding could stem from the issue that the majority of the literature trying to address these issues has focused on analysis...... procedure almost to the point of excluding the experimental principles and procedures. This thesis has tried to address this as far as possible. The focus has been on supplying practical interpretations of randomization and what blocking entails when designing experiments. These practical interpretations...

  2. Design and operation experience of TRACY

    Energy Technology Data Exchange (ETDEWEB)

    Takeshita, Isao; Ohno, Akio; Sakuraba, Koichi; Ogawa, Kazuhiko; Morita, Toshio; Aizawa, Eiju; Sugawara, Susumu [Department of NUCEF Project, Japan Atomic Energy Research Institute, Tokai, Ibaraki (Japan)

    1999-08-01

    To realize the dynamic behaviors at a criticality accident is an essential issue for not only rational design of fissile material handing facilities but also safety management of the facilities. The Transient Experiment Critical Facility (TRACY) had been constructed at the Nuclear Fuel Cycle Safety Engineering Research Facility (NUCEF) in JAERI. The purpose of TRACY is to obtain experimental data necessary to evaluate potential hazard of a criticality accident postulated in safety assessments of a reprocessing plant. TRACY's first transient operation using low enriched (10%) uranium nitrate solution fuel went on July 30 1996 and 118 operations including 51 transient operations are recorded since the first critical achievement. TRACY carries out intensive experimental researches on nuclear-thermal-hydraulic dynamic behavior and on investigation of migration amount of radioactive nuclei in solution fuel to gas phase. (author)

  3. Signatures factory: a dynamic alternative for teaching - learning layout concepts and waste disposal

    Directory of Open Access Journals (Sweden)

    Everton Luiz Vieira

    Full Text Available Abstract The use of games and simulation has now spread as a teaching support tool of engineering. This article aims to discuss this reality and this need, presenting as proposed a didactic game in a signature’s factory. From this, it was suggested that the participants involved modify the simulated factory environment through the knowledge acquired during the factory design discipline and layout. Various topics related to Production Engineering were addressed, such as layout, Takt time (TT, standardization of processes, elimination of waste and activities that add / do not add value. As a result, it was possible to see, among many things, the significant improvement in the understanding and assimilation of theoretical concepts by the participants. With the practice of simulation one can demonstrate and experience possible cases and difficulties they face on a daily basis within the factory environment.

  4. Tourism Spaces: The New Experience Design

    Directory of Open Access Journals (Sweden)

    Sara Cipolletti

    2014-06-01

    Full Text Available The aim of this article is to offer a theoretical contribution to the organisation, design and significance of tourism spaces, at a time when tourist practices are experiencing both change and intensification. From an architectural perspective, the study seeks to understand the evolutionary link between holiday practices and spaces, interpreting tourism as a context of creative relations between people, aspects, things and the places in which practices take place.Based on this interpretation, the paper defines architectural and urban categories of tourism, briefly comparing various literature on tourist organisations. In the second part, through the examination of recent examples of tourist experiences, planning actions and their ability to generate new tourism landscapes are evaluated. For both places and tourist experiences, that which emerges and the fields of application involved constitute guidelines and development tools for a form of tourism design that is more knowledgeable about the encounter between tourists and residents, and more reliable given that it is founded on the distinctive features of territories. The study demonstrates that tourism spaces, if intended as contexts of creative relations between people, aspects, things and places in which practices take place, may now develop a certain potential that once again calls into question a series of much debated opposites, tourists - residents, free time - work time, holiday space - day-to-day space, attractive resources and their transformation into elements of tourism, which had otherwise previously been consolidated by the tourist phenomenon. In the end, tourism proves itself to be an imaginative impulse, which is capable of reinventing the qualities of places and successfully orientating urban events.

  5. PCs in the factory

    CERN Document Server

    2013-01-01

    Please note this is a short discount publication.PCs have become as essential to the factory environment as they are to the office environment. This in-depth report examines how specially adapted PCs and peripherals are being established in Factory Process Control and Reporting. The report covers: * Hardware and Software* Typical Applications* Implementation Issues* Case Studies and Real Applications

  6. Interim Service ISDN Satellite (ISIS) hardware experiment design for advanced ISDN satellite design and experiments

    Science.gov (United States)

    Pepin, Gerard R.

    1992-01-01

    The Interim Service Integrated Services Digital Network (ISDN) Satellite (ISIS) Hardware Experiment Design for Advanced Satellite Designs describes the design of the ISDN Satellite Terminal Adapter (ISTA) capable of translating ISDN protocol traffic into time division multiple access (TDMA) signals for use by a communications satellite. The ISTA connects the Type 1 Network Termination (NT1) via the U-interface on the line termination side of the CPE to the V.35 interface for satellite uplink. The same ISTA converts in the opposite direction the V.35 to U-interface data with a simple switch setting.

  7. Design Point for a Spheromak Compression Experiment

    Science.gov (United States)

    Woodruff, Simon; Romero-Talamas, Carlos A.; O'Bryan, John; Stuber, James; Darpa Spheromak Team

    2015-11-01

    Two principal issues for the spheromak concept remain to be addressed experimentally: formation efficiency and confinement scaling. We are therefore developing a design point for a spheromak experiment that will be heated by adiabatic compression, utilizing the CORSICA and NIMROD codes as well as analytic modeling with target parameters R_initial =0.3m, R_final =0.1m, T_initial =0.2keV, T_final =1.8keV, n_initial =1019m-3 and n_final = 1021m-3, with radial convergence of C =3. This low convergence differentiates the concept from MTF with C =10 or more, since the plasma will be held in equilibrium throughout compression. We present results from CORSICA showing the placement of coils and passive structure to ensure stability during compression, and design of the capacitor bank needed to both form the target plasma and compress it. We specify target parameters for the compression in terms of plasma beta, formation efficiency and energy confinement. Work performed under DARPA grant N66001-14-1-4044.

  8. Future e+ e- Flavor Factories: accelerator challenges

    CERN Document Server

    Biagini, M E

    2008-01-01

    Operation of the B-Factories (PEP-II and KEKB) has been very successful, both having exceeded their design peak and integrated luminosity and provided a huge amount of good data to the experiments. Proposal for upgrades, in order to achieve about two order of magnitude larger luminosity, are in progress in Japan, with Super-KEKB, and in Europe, with SuperB. Very high beam intensity, very short bunch length and low Interaction Point beta-functions are the key points of the Japanese design, very challenging for the hardware components (RF, vacuum). On the other hand SuperB exploits a new collision scheme, namely large Piwinski angle and "crab waist", which will allow to reach a luminosity two order of magnitude larger without increasing beam currents and decreasing bunch lengths. In this talk the present status of the two projects will be reviewed.

  9. Influence of parental sample sizes on the estimating genetic parameters in cultured clamMeretrix meretrix based on factorial mating designs

    Institute of Scientific and Technical Information of China (English)

    LIANG Bingbing; YUE Xin; WANG Hongxia; LIU Baozhong

    2016-01-01

    The precise and accurate knowledge of genetic parameters is a prerequisite for making efficient selection strategies in breeding programs. A number of estimators of heritability about important economic traits in many marine mollusks are available in the literature, however very few research have evaluated about the accuracy of genetic parameters estimated with different family structures. Thus, in the present study, the effect of parent sample size for estimating the precision of genetic parameters of four growth traits in clamM. meretrix by factorial designs were analyzed through restricted maximum likelihood (REML) and Bayesian. The results showed that the average estimated heritabilities of growth traits obtained from REML were 0.23–0.32 for 9 and 16 full-sib families and 0.19–0.22 for 25 full-sib families. When using Bayesian inference, the average estimated heritabilities were 0.11–0.12 for 9 and 16 full-sib families and 0.13–0.16 for 25 full-sib families. Compared with REML, Bayesian got lower heritabilities, but still remained at a medium level. When the number of parents increased from 6 to 10, the estimated heritabilities were more closed to 0.20 in REML and 0.12 in Bayesian inference. Genetic correlations among traits were positive and high and had no significant difference between different sizes of designs. The accuracies of estimated breeding values from the 9 and 16 families were less precise than those from 25 families. Our results provide a basic genetic evaluation for growth traits and should be useful for the design and operation of a practical selective breeding program in the clamM. meretrix.

  10. Optimization of headspace solid-phase microextraction for the analysis of specific flavors in enzyme modified and natural Cheddar cheese using factorial design and response surface methodology.

    Science.gov (United States)

    Januszkiewicz, Julien; Sabik, Hassan; Azarnia, Sorayya; Lee, Byong

    2008-06-27

    A headspace solid-phase microextraction (HS-SPME) combined with gas chromatography-mass spectrometry (GC/MS) method was developed using experimental designs to quantify the flavor of commercial Cheddar cheese and enzyme-modified Cheddar cheese (EMCC). Seven target compounds (dimethyl disulfide, hexanal, hexanol, 2-heptanone, ethyl hexanoate, heptanoic acid, delta-decalactone) representative of different chemical families frequently present in Cheddar cheese were selected for this study. Three types of SPME fibres were tested: Carboxen/polydimethylsiloxane (CAR/PDMS), polyacrylate (PA) and Carbowax/divinylbenzene (CW/DVB). NaCl concentration and temperature, as well as extraction time were tested for their effect on the HS-SPME process. Two series of two-level full factorial designs were carried out for each fibre to determine the factors which best support the extraction of target flavors. Therefore, central composite designs (CCDs) were performed and response surface models were derived. Optimal extraction conditions for all selected compounds, including internal standards, were: 50 min at 55 degrees C in 3M NaCl for CAR/PDMS, 64 min at 62 degrees C in 6M NaCl for PA, and 37 min at 67 degrees C in 6M NaCl for CW/DVB. Given its superior sensitivity, CAR/PDMS fibre was selected to evaluate the target analytes in commercial Cheddar cheese and EMCC. With this fibre, calibration curves were linear for all targeted compounds (from 0.5 to 6 microg g(-1)), except for heptanoic acid which only showed a linear response with PA fibres. Detection limits ranged from 0.3 to 1.6 microg g(-1) and quantification limits from 0.8 to 3.6 microg g(-1). The mean repeatability value for all flavor compounds was 8.8%. The method accuracy is satisfactory with recoveries ranging from 97 to 109%. Six of the targeted flavors were detected in commercial Cheddar cheese and EMCC.

  11. PERBANDINGAN METODE 2K-P FRACTIONAL FACTORIAL DENGAN METODE TAGUCHI PADA PROSES PEMBUATAN FIBER GLASS

    Directory of Open Access Journals (Sweden)

    Suryanata Rahardja

    2001-01-01

    Full Text Available Fiber glass products are widely used in the industry. High quality fiberglass product requires a composition and to obtain the optimal composition, an experiment needs to be done. In this project, experimental designs in 2k-p fractional factorial design and Taguchi method were carried out to obtain the optimal composition. According to the impact test results based on the model by the JIS (Japanese Industrial Standard for fiber glass, it was found that the 2k-p fractional factorial design method and Taguchi methods are the same. Abstract in Bahasa Indonesia : Produk fiber glass banyak digunakan di dunia industri saat ini. Produk fiber glass berkualitas tinggi dibutuhkan suatu komposisi, dimana untuk komposisi yang tepat diperlukan eksperimen. Desain eksperimen 2k-p fractional factorial design dengan metode Taguchi telah digunakan untuk mendapatkan komposisi yang optimal. Hasil pengujian kekuatan impak dengan bentuk dan pengujian sesuai JIS (Japanese Industrial Standard pada fiber glass didapatkan bahwa metode 2k-p fractional factorial design dengan metode Taguchi tidak berbeda. Kata kunci : 2k-p fractional factorial design, Taguchi, JIS

  12. Optimization of mechanical properties of non-woven short sisal fibre-reinforced vinyl ester composite using factorial design and GA method

    Indian Academy of Sciences (India)

    S Velumani; P Navaneethakrishnan; S Jayabal; D S Robinson Smart

    2013-08-01

    This work presents a systematic approach to evaluate and study the effect of process parameters on tensile, flexural and impact strength of untreated short sisal fibre-reinforced vinyl ester polymer-based composites and predicts the optimum properties of random natural fibre-reinforced composites. The natural fibre of sisal at lengths of 10, 30 and 50 mm and vinyl ester resin at loadings of 15, 30 and 45 (wt%) were prepared. The composite panel was then fabricated using hand lay method in cold process of size 180 × 160 mm2. Samples were then cut from the panel and subjected to mechanical properties testing such as tensile, flexural and impact strengths. The average tensile strength ranges between 27.1 and 43.9 MPa. The flexural strength ranged between 26.9 and 49.5 MPa and the impact strength ranged between 16 and 93 J/m. The strength values were optimized using factorial design and genetic algorithm (GA) method. The predicted optimum process parameter values are in good agreement with the experimental results.

  13. Adsorption of Disperse Orange 30 dye onto activated carbon derived from Holm Oak (Quercus Ilex) acorns: A 3(k) factorial design and analysis.

    Science.gov (United States)

    Tezcan Un, Umran; Ates, Funda; Erginel, Nihal; Ozcan, Oznur; Oduncu, Emre

    2015-05-15

    In this study, samples of activated carbon were prepared from Holm Oak acorns by chemical activation with H3PO4, ZnCl2 and KOH as activating agents. The samples were characterized by SEM, BET, FTIR and elemental analysis, and were then evaluated for the removal of Disperse Orange 30 (DO30) dyes from aqueous solutions. A 3(k) factorial design was used to determine the interaction effects of carbonization temperature, pH, dosage of adsorbent and type of activating agent on the amount of dye removal. Also, level of effectiveness factors were determined by conducting regression models for maximum adsorption efficiency. Of all the samples, the sample generated using ZnCl2 as an activating agent showed a maximum dye removal efficiency of 93.5% at a carbonization temperature of 750 °C, a pH of 2 and an adsorbent dosage of 0.15 g/25 ml. The analysis shows that the adsorption process depends significantly on the type of activating agent used in the preparation of activated carbon.

  14. A FACTORIAL DESIGN APPLIED TO THE STUDY OF CHROMIUM TOXICITY ON THE GLUTATHIONE LEVELS OF Brachiaria brizantha AND Brachiaria ruziziensis SEEDLINGS

    Directory of Open Access Journals (Sweden)

    Rafael Marques

    2015-08-01

    Full Text Available Chromium toxicity affects redox reactions within plant cells, generating detrimental reactive oxygen species. Glutathione is an antioxidant peptide and also a substrate for the production of phytochelatins, which are chelating peptides reported to mitigate Cr3+ toxicity in plants. In this study, Brachiaria brizantha (B. brizantha and Brachiaria ruziziensis (B. ruziziensis seedlings were evaluated for physiological responses and glutathione production following the addition of zero or 5 mg L-1 Cr3+ to the nutrient solution. Glutathione levels were determined by colorimetric analysis at 412 nm using 5,5'-dithio-bis(2-nitrobenzoic acid as a chromophore reagent and recovery with glutathione reductase (with evaluations at days 10 and 20 of continuous growth. The assessments were carried out in a completely randomized design with 2 authentic replications, and arranged in a 23 factorial. Cr3+ caused an average increase of 0.76 mg g-1 in the initial glutathione content. However, by day 20 there was an average reduction of 3.63 mg g-1. Chromium-affected physiological detrimental responses, albeit detected in both species, were less-pronounced in B. ruziziensis, along with a much higher level of glutathione. This study indicates that B. ruziziensis has a greater tolerance for chromium toxicity than B. brizantha, and that glutathione is likely to be involved in the mitigation of chromium stress in B. ruziziensis.

  15. Application of full-factorial design in the synthesis of polypropylene-g-poly(glycidyl methacrylate) functional material for metal ion adsorption

    Science.gov (United States)

    Madrid, Jordan F.; Lopez, Girlie Eunice P.; Abad, Lucille V.

    2017-07-01

    The graft polymerization of glycidyl methacrylate onto electron beam pre-irradiated polypropylene (PP) nonwoven fabric was optimized using a 43 full factorial design analysis. The analysis yielded a polynomial equation that relates the linear, quadratic and interaction effects of the independent parameters to degree of grafting (Dg). The linear terms (i.e. absorbed dose, reaction time and monomer concentration), quadratic terms of time and concentration, and interaction term between absorbed dose and time were determined as significant independent parameters based from analysis of variance (ANOVA). The optimum grafting time and absorbed dose to achieve 150% Dg at 5% monomer concentration were 3.5 h and 39.8 kGy, respectively. The pristine PP, polypropylene-g-poly(glycidyl methacrylate) (PP-g-PGMA) and functionalized grafted materials were characterized using ATR-FTIR spectroscopy, thermogravimetric analysis and scanning electron microscopy. The affinities of the synthesized adsorbents towards the target metal ions at pH 4 were established to be in the following order: Cr(VI) >> Pb(II) Cd(II) for the amine functionalized PP-g-PGMA; and Pb(II) > Cd(II) > Cr(VI) for the carboxylic acid functionalized PP-g-PGMA.

  16. Development of innovative oil-core self-organized nanovesicles prepared with chitosan and lecithin using a 2(3) full-factorial design.

    Science.gov (United States)

    Haas, Sandra Elisa; de Andrade, Cristiane; Sansone, Pedro Ernesto da Silva; Guterres, Silvia; Dalla Costa, Teresa

    2014-11-01

    The aim of this study was to develop innovative nanosystems with isopropyl myristate as the oil core of self-assembly nanovesicles constituted of chitosan and lecithin using a 2(3) factorial design. The factors analyzed were chitosan (X1, levels 4 and 8  mg/ml), oil (X2, levels 10 and 20  mg/ml) and lecithin (X3, levels 4 and 8 mg/ml). The responses evaluated were diameter, zeta potential, pH, viscosity, and backscattering analysis. The bioavailability was evaluated after oral administration of clozapine free and nanoencapsulated in rats. The diameter ranged from 0.348 to 1.5 µm for F2 (X1, 4; X2, 10; X3, 8 mg/ml) and F7 (X1, 8; X2, 20; X3, 4  mg/ml), respectively. Laser diffractometry analysis revealed only one diameter population for all batches. Zeta potential was positive, being influenced by X1 and X2/X3 association. Viscosity values were dependent on the X1 and X2 concentrations used. A structure proposed for the nanosystem consists of chitosan forming the hydrophilic shell layer that protects the core comprised of lecithin and the hydrophobic groups of oil. The AUC0-∞ was almost 3 times higher with the clozapine nanoencapsuted in relation to free drug. It was developed a new nanosystem which is able of improving the absorption of drugs.

  17. Novel lectin-modified poly(ethylene-co-vinyl acetate) mucoadhesive nanoparticles of carvedilol: preparation and in vitro optimization using a two-level factorial design.

    Science.gov (United States)

    Varshosaz, Jaleh; Moazen, Ellaheh

    2014-08-01

    Carvedilol used in cardiovascular diseases has systemic bioavailability of 25-35%. The objective of this study was production of lectin-modified poly(ethylene-co-vinyl acetate) (PEVA) as mucoadhesive nanoparticles to enhance low oral bioavailability of carvedilol. Nanoparticles were prepared by the emulsification-solvent evaporation method using a two-level factorial design. The studied variables included the vinyl acetate content of the polymer, drug and polymer content. Surface modification of PEVA nanoparticles with lectin was carried out by the adsorption method and coupling efficiency was determined using the Bradford assay. Mucoadhesion of nanoparticles was studied on mucin. The particle size, polydispersity index, zeta potential, drug loading and drug release from nanoparticles were studied. The morphology of nanoparticles and crystalline status of the entrapped drug were studied by SEM, DSC and XRD tests, respectively. Results showed the most effective factor on particle size and zeta potential was the interaction of polymer and drug content while, drug loading efficiency and mucoadhesion were more affected by the interaction of polymer type and drug content. Drug concentration was the most effective variable on the drug release rate. The drug was in amorphous state in nanoparticles. The optimum nanoparticles obtained by 45 mg of copolymer contained 12% vinyl acetate/4.3 ml of organic phase and drug concentration of 37.5 wt% of polymer.

  18. Box-Behnken factorial design to obtain a phenolic-rich extract from the aerial parts of Chelidonium majus L.

    Science.gov (United States)

    Grosso, Clara; Ferreres, Federico; Gil-Izquierdo, Angel; Valentão, Patrícia; Sampaio, Maria; Lima, Júlio; Andrade, Paula B

    2014-12-01

    A Box-Behnken design (BBD) was developed to study the influence of four parameters (X1: % methanol; X2: extraction time; X3: extraction temperature; X4: solid/solvent ratio) on two responses, namely extraction yield and phenolics content of the aerial parts of Chelidonium majus L. The model presented a good fit to the experimental results for the extraction yield, being significantly influenced by X1 and X4. On the other hand a parameter reduction was necessary to run the model for phenolics content, showing that only X1 and X2 had great influence on the response. Two best extraction conditions were defined: X1=76.8% MeOH, X2=150.0 min, X3=60.0°C and X4=1:100 and X1=69.2%, X2=150 min, X3=42.5°C and X4=1:100. Moreover, the HPLC-DAD-ESI/MS(n) analysis conducted with the center point sample revealed the presence of 15 alkaloids and 15 phenolic compounds, from which the 9 flavonoids and 3 hydroxycinnamic acids are described for the first time. Only phenolic compounds were quantified by a validated HPLC-DAD method, the pair quercetin-3-O-rutinoside+quercetin-3-O-glucoside dominating all the 29 extracts. This study is of great importance for future works that seek to apply the phenolic profile to the quality control of C. majus samples. Copyright © 2014 Elsevier B.V. All rights reserved.

  19. Health Services OutPatient Experience questionnaire: factorial validity and reliability of a patient-centered outcome measure for outpatient settings in Italy

    Directory of Open Access Journals (Sweden)

    Coluccia A

    2014-09-01

    Full Text Available Anna Coluccia, Fabio Ferretti, Andrea PozzaDepartment of Medical Sciences, Surgery and Neurosciences, Santa Maria alle Scotte University Hospital, University of Siena, Siena, ItalyPurpose: The patient-centered approach to health care does not seem to be sufficiently developed in the Italian context, and is still characterized by the biomedical model. In addition, there is a lack of validated outcome measures to assess outpatient experience as an aspect common to a variety of settings. The current study aimed to evaluate the factorial validity, reliability, and invariance across sex of the Health Services OutPatient Experience (HSOPE questionnaire, a short ten-item measure of patient-centeredness for Italian adult outpatients. The rationale for unidimensionality of the measure was that it could cover global patient experience as a process common to patients with a variety of diseases and irrespective of the phase of treatment course.Patients and methods: The HSOPE was compiled by 1,532 adult outpatients (51% females, mean age 59.22 years, standard deviation 16.26 receiving care in ten facilities at the Santa Maria alle Scotte University Hospital of Siena, Italy. The sample represented all the age cohorts. Twelve percent were young adults, 57% were adults, and 32% were older adults. Exploratory and confirmatory factor analyses were conducted to evaluate factor structure. Reliability was evaluated as internal consistency using Cronbach’s α. Factor invariance was assessed through multigroup analyses.Results: Both exploratory and confirmatory analyses suggested a clearly defined unidimensional structure of the measure, with all the ten items having salient loadings on a single factor. Internal consistency was excellent (α=0.95. Indices of model fit supported a single-factor structure for both male and female outpatient groups. Young adult outpatients had significantly lower scores on perceived patient-centeredness relative to older adults. No

  20. Prior experience and its effects on audience design

    OpenAIRE

    Wilson, Kerry

    2008-01-01

    PRIOR EXPERIENCE AND ITS EFFECTS ON AUDIENCE DESIGN. Abstract Objective Audience design involves tailoring utterances to suit the needs of your partner. The current experiment was interested in whether a speaker’s experience has an impact on their use of audience design as a conversational tool and whether a speaker can transfer knowledge gained in one task across to a similar task. Design Two description tasks were used to investigate audience design by recording the numbe...

  1. Integrating conceptualizations of experience into the interaction design process

    DEFF Research Database (Denmark)

    Dalsgaard, Peter

    2010-01-01

    From a design perspective, the increasing awareness of experiential aspects of interactive systems prompts the question of how conceptualizations of experience can inform and potentially be integrated into the interaction design process. This paper presents one approach to integrating theoretical...... perspectives on experience in design by formulating conceptual constructs that can guide design decisions....

  2. Towards energy transparent factories

    CERN Document Server

    Posselt, Gerrit

    2016-01-01

    This monograph provides a methodological approach for establishing demand-oriented levels of energy transparency of factories. The author presents a systematic indication of energy drivers and cost factors, taking into account the interdependencies between facility and production domains. Particular attention is given to energy flow metering and monitoring. Readers will also be provided with an in-depth description of a planning tool which allows for systematically deriving suitable metering points in complex factory environments. The target audience primarily comprises researchers and experts in the field of factory planning, but the book may also be beneficial for graduate students.

  3. Photon collider Higgs factories

    CERN Document Server

    Telnov, V I

    2014-01-01

    The discovery of the Higgs boson (and still nothing else) have triggered appearance of many proposals of Higgs factories for precision measurement of the Higgs properties. Among them there are several projects of photon colliders (PC) without e+e- in addition to PLC based on e+e- linear colliders ILC and CLIC. In this paper, following a brief discussion of Higgs factories physics program I give an overview of photon colliders based on linear colliders ILC and CLIC, and of the recently proposed photon-collider Higgs factories with no e+e- collision option based on recirculation linacs in ring tunnels.

  4. The DESI Experiment Part II: Instrument Design

    CERN Document Server

    Aghamousa, Amir; Ahlen, Steve; Alam, Shadab; Allen, Lori E; Prieto, Carlos Allende; Annis, James; Bailey, Stephen; Balland, Christophe; Ballester, Otger; Baltay, Charles; Beaufore, Lucas; Bebek, Chris; Beers, Timothy C; Bell, Eric F; Bernal, José Luis; Besuner, Robert; Beutler, Florian; Blake, Chris; Bleuler, Hannes; Blomqvist, Michael; Blum, Robert; Bolton, Adam S; Briceno, Cesar; Buckley-Geer, Elizabeth; Burden, Angela; Burtin, Etienne; Busca, Nicolas G; Cahn, Robert N; Cai, Yan-Chuan; Carlberg, Raymond G; Carton, Pierre-Henri; Casas, Ricard; Castander, Francisco J; Claybaugh, Todd M; Close, Madeline; Coker, Carl T; Cole, Shaun; Cooper, Andrew P; Cousinou, M -C; Crocce, Martin; Cuby, Jean-Gabriel; Cunningham, Daniel P; Davis, Tamara; Dawson, Kyle S; de la Macorra, Axel; De Vicente, Juan; Delubac, Timothée; Derwent, Mark; Dey, Arjun; Dhungana, Govinda; Ding, Zhejie; Duan, Yutong T; Ealet, Anne; Edelstein, Jerry; Eftekharzadeh, Sarah; Eisenstein, Daniel J; Elliott, Ann; Escoffier, Stephanie; Evatt, Matthew; Fagrelius, Parker; Fan, Xiaohui; Fanning, Kevin; Farahi, Arya; Favole, Ginevra; Feng, Yu; Fernandez, Enrique; Findlay, Joseph R; Finkbeiner, Douglas P; Fitzpatrick, Michael J; Flaugher, Brenna; Flender, Samuel; Font-Ribera, Andreu; Forero-Romero, Jaime E; Fosalba, Pablo; Frenk, Carlos S; Fumagalli, Michele; Garcia-Bellido, Juan; Gaztanaga, Enrique; Gershkovich, Irina; Gillet, Denis; Gonzalez-de-Rivera, Guillermo; Gonzalez-Perez, Violeta; Gott, Shelby; Graur, Or; Gutierrez, Gaston; Guy, Julien; Habib, Salman; Heetderks, Henry; Heetderks, Ian; Heitmann, Katrin; Hellwing, Wojciech A; Herrera, David A; Ho, Shirley; Honscheid, Klaus; Huff, Eric; Hutchinson, Timothy A; Huterer, Dragan; Hwang, Ho Seong; Laguna, Joseph Maria Illa; Ishikawa, Yuzo; Jacobs, Dianna; Jeffrey, Niall; Jelinsky, Patrick; Jiang, Linhua; Jimenez, Jorge; Johnson, Jennifer; Joyce, Richard; Jullo, Eric; Juneau, Stephanie; Kama, Sami; Karcher, Armin; Karkar, Sonia; Kehoe, Robert; Kennamer, Noble; Kent, Stephen; Kilbinger, Martin; Kim, Alex G; Kirkby, David; Kisner, Theodore; Kitanidis, Ellie; Kneib, Jean-Paul; Koposov, Sergey; Kovacs, Eve; Kremin, Anthony; Kron, Richard; Kronig, Luzius; Kueter-Young, Andrea; Lacey, Cedric G; Lafever, Robin; Lahav, Ofer; Lambert, Andrew; Landriau, Martin; Lang, Dustin; Name, Publication; Lauer, Tod R; Goff, Jean-Marc Le; Guillou, Laurent Le; Van Suu, Auguste Le; Lee, Jae Hyeon; Lee, Su-Jeong; Leitner, Daniela; Levi, Michael E; L'Huillier, Benjamin; Li, Baojiu; Liang, Ming; Lin, Huan; Linder, Eric; Loebman, Sarah R; Lukić, Zarija; MacCrann, Niall; Magneville, Christophe; Makarem, Laleh; Manera, Marc; Manser, Christopher J; Marshall, Robert; Martini, Paul; Massey, Richard; Matheson, Thomas; McCauley, Jeremy; McDonald, Patrick; McGreer, Ian D; Meisner, Aaron; Metcalfe, Nigel; Miller, Timothy N; Miquel, Ramon; Moustakas, John; Myers, Adam; Naik, Milind; Newman, Jeffrey; Nichol, Robert C; Nicola, Andrina; da Costa, Luiz Nicolati; Niz, Gustavo; Norberg, Peder; Nord, Brian; Norman, Dara; Nugent, Peter; O'Brien, Thomas; Oh, Minji; Olsen, Knut A G; Padilla, Cristobal; Padmanabhan, Hamsa; Padmanabhan, Nikhil; Palanque-Delabrouille, Nathalie; Palmese, Antonella; Pappalardo, Daniel; Park, Changbom; Patej, Anna; Peacock, John A; Peiris, Hiranya V; Percival, Will J; Perruchot, Sandrine; Pieri, Matthew M; Pogge, Richard; Poppett, Claire; Probst, Ronald G; Rabinowitz, David; Ree, Chang Hee; Refregier, Alexandre; Regal, Xavier; Reid, Beth; Reil, Kevin; Rezaie, Mehdi; Rockosi, Connie; Roe, Natalie; Ronayette, Samuel; Roodman, Aaron; Ross, Ashley J; Ross, Nicholas P; Rossi, Graziano; Rozo, Eduardo; Ruhlmann-Kleider, Vanina; Rykoff, Eli; Sabiu, Cristiano; Samushia, Lado; Sanchez, Javier; Schlegel, David J; Schneider, Michael; Schubnell, Michael; Secroun, Aurélia; Seljak, Uros; Seo, Hee-Jong; Serrano, Santiago; Shafieloo, Arman; Shan, Huanyuan; Sholl, Michael J; Shourt, William V; Silber, Joseph H; Silva, David R; Sirk, Martin M; Slosar, Anze; Smith, Alex; Smoot, George; Som, Debopam; Song, Yong-Seon; Sprayberry, David; Staten, Ryan; Stefanik, Andy; Tarle, Gregory; Tie, Suk Sien; Tinker, Jeremy L; Tojeiro, Rita; Valdes, Francisco; Valenzuela, Octavio; Valluri, Monica; Vargas-Magana, Mariana; Verde, Licia; Walker, Alistair R; Wang, Yuting; Weaver, Benjamin A; Weaverdyck, Curtis; Wechsler, Risa; Weinberg, David H; White, Martin; Yang, Qian; Yeche, Christophe; Zhao, Gong-Bo; Zheng, Yi; Zhu, Yaling; Zou, Hu; Zu, Ying

    2016-01-01

    DESI (Dark Energy Spectropic Instrument) is a Stage IV ground-based dark energy experiment that will study baryon acoustic oscillations and the growth of structure through redshift-space distortions with a wide-area galaxy and quasar redshift survey. The DESI instrument is a robotically-actuated, fiber-fed spectrograph capable of taking up to 5,000 simultaneous spectra over a wavelength range from 360 nm to 980 nm. The fibers feed ten three-arm spectrographs with resolution $R= \\lambda/\\Delta\\lambda$ between 2000 and 5500, depending on wavelength. The DESI instrument will be used to conduct a five-year survey designed to cover 14,000 deg$^2$. This powerful instrument will be installed at prime focus on the 4-m Mayall telescope in Kitt Peak, Arizona, along with a new optical corrector, which will provide a three-degree diameter field of view. The DESI collaboration will also deliver a spectroscopic pipeline and data management system to reduce and archive all data for eventual public use.

  5. New physical model design for Vapex experiments

    Energy Technology Data Exchange (ETDEWEB)

    Yazdani, A.; Maini, B.B. [Calgary Univ., AB (Canada)

    2004-07-01

    Solvent extraction is gaining much attention as an in-situ recovery method for difficult to produce heavy oil and tar sand deposits. Vapour extraction (VAPEX) is similar to the steam assisted gravity drainage (SAGD) process used in heavy oil production. In VAPEX, vaporized solvents are used instead of high temperature steam and the viscosity of the oil is reduced in situ. VAPEX is well suited for formations that are thin and where heat losses are unavoidable. It can be applied in the presence of overlying gas caps; bottom water aquifers; low thermal conductivity; high water saturation; clay swelling; and, formation damage. Modelling studies that use rectangular shaped models are limited at high reservoir pressures. This study presents a new design of physical models that overcomes this limitation. The annular space between two cylindrical pipes is used for developing slice-type and sand-filled models. This newly developed model is more compatible with high pressure. This paper compares results of VAPEX experiments using the cylindrical models and the rectangular models. The stabilized drainage rates from the newly developed cylindrical models are in very good agreement with those from the rectangular models. 16 refs., 3 tabs., 11 figs.

  6. Caracterização de hidrogéis condutores constituídos por PAAm e PEDOT/PSS por meio de planejamento fatorial Characterization of conducting hydrogels made with PAAm and PEDOT/PSS using factorial design

    Directory of Open Access Journals (Sweden)

    Fauze A. Aouada

    2008-06-01

    Full Text Available Neste trabalho, hidrogéis condutores do tipo semi-IPN constituídos por poliacrilamida (PAAm e polímero intrinsecamente condutor poli(3,4-etileno dioxitiofeno/poli(estireno-sulfonato (PEDOT/PSS foram sintetizados e suas propriedades hidrofílicas, mecânicas, condutoras e ópticas foram caracterizadas por meio de planejamento fatorial completo 2³ com ponto central. Para isso, utilizaram-se três fatores: concentrações de acrilamida (AAm e N,N’-metileno-bis-acrilamida (MBAAm, e quantidade de PEDOT/PSS, em três níveis, sendo um deles o ponto central. O planejamento foi construído para avaliar os efeitos desses fatores (efeitos principais e efeitos de interação entre os fatores nas seguintes propriedades dos hidrogéis estudados (respostas: grau de intumescimento, tensão máxima de compressão, condutância iônica e intensidade relativa de luz transmitida através dos hidrogéis estudados. Os resultados demonstraram que a estabilidade mecânica dos hidrogéis semi-IPN é preservada e a presença de PEDOT/PSS aumenta o entrelaçamento na matriz de PAAm. Observou-se também que as propriedades ópticas são fortemente influenciadas com a presença de PEDOT/PSS. Dessa forma, torna-se possível obter hidrogéis com hidrofilicidade, estabilidade mecânica e transparência controladas, o que é importante para a aplicação desses materiais, principalmente como dispositivos ópticos.Conductive semi-IPN hydrogels made with polyacrylamide (PAAm and the conductive polymer poly(3,4-ethylene dioxythiophene/poly(styrenesulfonate (PEDOT/PSS were synthesized and the hydrophilicity, mechanical, ionic conductivity and optical properties were characterized through the 2³ factorial design. The experiments concerning the factorial design were randomly performed. The inputs were acrylamide (AAm, N,N’-methylene-bis-acrylamide (MBAAm and PEDOT/PSS contents, each fixed in three levels, one being the central point. The outputs were the swelling degree

  7. The physics of the B factories

    CERN Document Server

    Bevan, A J; Mannel, Th; Prell, S; Yabsley, B D; Abe, K; Aihara, H; Anulli, F; Arnaud, N; Aushev, T; Beneke, M; Beringer, J; Bianchi, F; Bigi, I I; Bona, M; Brambilla, N; Brodzicka, J; Chang, P; Charles, M J; Cheng, C H; Cheng, H -Y; Chistov, R; Colangelo, P; Coleman, J P; Drutskoy, A; Druzhinin, V P; Eidelman, S; Eigen, G; Eisner, A M; Faccini, R; Flood, K T; Gambino, P; Gaz, A; Gradl, W; Hayashii, H; Higuchi, T; Hulsbergen, W D; Hurth, T; Iijima, T; Itoh, R; Jackson, P D; Kass, R; Kolomensky, Yu G; Kou, E; Križan, P; Kronfeld, A; Kumano, S; Kwon, Y J; Latham, T E; Leith, D W G S; Lüth, V; Martinez-Vidal, F; Meadows, B T; Mussa, R; Nakao, M; Nishida, S; Ocariz, J; Olsen, S L; Pakhlov, P; Pakhlova, G; Palano, A; Pich, A; Playfer, S; Poluektov, A; Porter, F C; Robertson, S H; Roney, J M; Roodman, A; Sakai, Y; Schwanda, C; Schwartz, A J; Seidl, R; Sekula, S J; Steinhauser, M; Sumisawa, K; Swanson, E S; Tackmann, F; Trabelsi, K; Uehara, S; Uno, S; van der Water, R; Vasseur, G; Verkerke, W; Waldi, R; Wang, M Z; Wilson, F F; Zupan, J; Zupanc, A; Adachi, I; Albert, J; Banerjee, Sw; Ben-Haim, E; Biassoni, P; Cahn, R N; Cartaro, C; Chauveau, J; Chen, C; Chiang, C C; Cowan, R; Dalseno, J; Davier, M; Davies, C; Dingfelder, J C; Echenard, B; Epifanov, D; Fulsom, B G; Gabareen, A M; Gary, J W; Godang, R; Graham, M T; Hafner, A; Hamilton, B; Hartmann, T; Hayasaka, K; Hearty, C; Iwasaki, Y; Khodjamirian, A; Kusaka, A; Kuzmin, A; Lafferty, G D; Lazzaro, A; Li, J; Lindemann, D; Long, O; Lusiani, A; Marchiori, G; Martinelli, M; Miyabayashi, K; Mizuk, R; Mohanty, G B; Muller, D R; Nakazawa, H; Ongmongkolkul, P; Pacetti, S; Palombo, F; Pedlar, T K; Piilonen, L E; Pilloni, A; Poireau, V; Prothmann, K; Pulliam, T; Rama, M; Ratcliff, B N; Roudeau, P; Schrenk, S; Schroeder, T; Schubert, K R; Shen, C P; Shwartz, B; Soffer, A; Solodov, E P; Somov, A; Starič, M; Stracka, S; Telnov, A V; Todyshev, K Yu; Tsuboyama, T; Uglov, T; Vinokurova, A; Walsh, J J; Watanabe, Y; Won, E; Wormser, G; Wright, D H; Ye, S; Zhang, C C; Abachi, S; Abashian, A; Abe, N; Abe, R; Abe, T; Abrams, G S; Adam, I; Adamczyk, K; Adametz, A; Adye, T; Agarwal, A; Ahmed, H; Ahmed, M; Ahmed, S; Ahn, B S; Ahn, H S; Aitchison, I J R; Akai, K; Akar, S; Akatsu, M; Akemoto, M; Akhmetshin, R; Akre, R; Alam, M S; Albert, J N; Aleksan, R; Alexander, J P; Alimonti, G; Allen, M T; Allison, J; Allmendinger, T; Alsmiller, J R G; Altenburg, D; Alwyn, K E; An, Q; Anderson, J; Andreassen, R; Andreotti, D; Andreotti, M; Andress, J C; Angelini, C; Anipko, D; Anjomshoaa, A; Anthony, P L; Antillon, E A; Antonioli, E; Aoki, K; Arguin, J F; A, K; Arisaka, K; Asai, K; Asai, M; Asano, Y; Asgeirsson, D J; Asner, D M; Aso, T; Aspinwall, M L; Aston, D; Atmacan, H; Aubert, B; Aulchenko, V; Ayad, R; Azemoon, T; Aziz, T; Azzolini, V; Azzopardi, D E; Baak, M A; Back, J J; Bagnasco, S; Bahinipati, S; Bailey, D S; Bailey, S; Bailly, P; van Bakel, N; Bakich, A M; Bala, A; Balagura, V; Baldini-Ferroli, R; Ban, Y; Banas, E; Band, H R; Banerjee, S; Baracchini, E; Barate, R; Barberio, E; Barbero, M; Bard, D J; Barillari, T; Barlow, N R; Barlow, R J; Barrett, M; Bartel, W; Bartelt, J; Bartoldus, R; Batignani, G; Battaglia, M; Bauer, J M; Bay, A; Beaulieu, M; Bechtle, P; Beck, T W; Becker, J; Becla, J; Bedny, I; Behari, S; Behera, P K; Behn, E; Behr, L; Beigbeder, C; Beiline, D; Bell, R; Bellini, F; Bellis, M; Bellodi, G; Belous, K; Benayoun, M; Benelli, G; Benitez, J F; Benkebil, M; Berger, N; Bernabeu, J; Bernard, D; Bernet, R; Bernlochner, F U; Berryhill, J W; Bertsche, K; Besson, P; Best, D S; Bettarini, S; Bettoni, D; Bhardwaj, V; Bhimji, W; Bhuyan, B; Biagini, M E; Biasini, M; van Bibber, K; Biesiada, J; Bingham, I; Bionta, R M; Bischofberger, M; Bitenc, U; Bizjak, I; Blanc, F; Blaylock, G; Blinov, V E; Bloom, E; Bloom, P C; Blount, N L; Blouw, J; Bly, M; Blyth, S; Boeheim, C T; Bomben, M; Bondar, A; Bondioli, M; Bonneaud, G R; Bonvicini, G; Booke, M; Booth, J; Borean, C; Borgland, A W; Borsato, E; Bosi, F; Bosisio, L; Botov, A A; Bougher, J; Bouldin, K; Bourgeois, P; Boutigny, D; Bowerman, D A; Boyarski, A M; Boyce, R F; Boyd, J T; Bozek, A; Bozzi, C; Bračko, M; Brandenburg, G; Brandt, T; Brau, B; Brau, J; Breon, A B; Breton, D; Brew, C; Briand, H; Bright-Thomas, P G; Brigljević, V; Britton, D I; Brochard, F; Broomer, B; Brose, J; Browder, T E; Brown, C L; Brown, C M; Brown, D N; Browne, M; Bruinsma, M; Brunet, S; Bucci, F; Buchanan, C; Buchmueller, O L; Bünger, C; Bugg, W; Bukin, A D; Bula, R; Bulten, H; Burchat, P R; Burgess, W; Burke, J P; Button-Shafer, J; Buzykaev, A R; Buzzo, A; Cai, Y; Calabrese, R; Calcaterra, A; Calderini, G; Camanzi, B; Campagna, E; Campagnari, C; Capra, R; Carassiti, V; Carpinelli, M; Carroll, M; Casarosa, G; Casey, B C K; Cason, N M; Castelli, G; Cavallo, N; Cavoto, G; Cecchi, A; Cenci, R; Cerizza, G; Cervelli, A; Ceseracciu, A; Chai, X; Chaisanguanthum, K S

    2014-01-01

    This work is on the Physics of the B Factories. Part A of this book contains a brief description of the SLAC and KEK B Factories as well as their detectors, BaBar and Belle, and data taking related issues. Part B discusses tools and methods used by the experiments in order to obtain results. The results themselves can be found in Part C.

  8. Development of RP UPLC-TOF/MS, stability indicating method for omeprazole and its related substances by applying two level factorial design; and identification and synthesis of non-pharmacopoeial impurities.

    Science.gov (United States)

    Jadhav, Sushant Bhimrao; Kumar, C Kiran; Bandichhor, Rakeshwar; Bhosale, P N

    2016-01-25

    A new UPLC-TOF/MS compatible, reverse phase-stability indicating method was developed for determination of Omeprazole (OMP) and its related substances in pharmaceutical dosage forms by implementing Design of Experiment (DoE) i.e. two level full factorial Design (2(3)+3 center points=11 experiments) to understand the Critical Method Parameters (CMP) and its relation with Critical Method Attribute (CMA); to ensure robustness of the method. The separation of eleven specified impurities including conversion product of OMP related compound F (13) and G (14) i.e. Impurity-I (1), OMP related compound-I (11) and OMP 4-chloro analog (12) was achieved in a single method on Acquity BEH shield RP18 100 × 2.1 mm, 1.7 μm column, with inlet filter (0.2 μm) using gradient elution and detector wavelength at 305 nm and validated in accordance with ICH guidelines and found to be accurate, precise, reproducible, robust and specific. The drug was found to degrade extensively in heat, humidity and acidic conditions and forms unknown degradation products during stability studies. The same method was used for LC-MS analysis to identify m/z and fragmentation of maximum unknown impurities (Non-Pharmacopoeial) i.e. Impurity-I (1), Impurity-III (3), Impurity-V (5) and Impurity-VIII (9) formed during stability studies. Based on the results, degradation pathway for the drug has been proposed and synthesis of identified impurities i.e. impurities (Impurity-I (1), Impurity-III (3), Impurity-V (5) and Impurity-VIII (9)) are discussed in detail to ensure in-depth understanding of OMP and its related impurities and optimum performance during lifetime of the product.

  9. RIKEN RI Beam Factory project

    Energy Technology Data Exchange (ETDEWEB)

    Yano, Yasushige; Goto, Akira; Katayama, Takeshi [Institute of Physical and Chemical Research, Wako, Saitama (Japan)

    1997-03-01

    The RARF proposes `RIKEN RI Beam Factory` as a next facility-expanding project. The factory makes it the primary aim to provide RI (Radioactive Isotope) beams covering over the whole atomic-mass range with the world-highest intensity in a wide energy range up to several hundreds MeV/nucleon. These RI beams are generated by the fragmentation of high-intensity heavy-ion beams. For the efficient production heavy-ion energies will be boosted up to over 100 MeV/nucleon even for very heavy ions by a K2500-MeV superconducting ring cyclotron serving as a post accelerator of the existing K540-MeV ring cyclotron. A new type of experimental installation called `MUSES` (Multi-USe Experimental Storage rings) will be constructed as well. With MUSES, various types of unique colliding experiments will become possible. (author)

  10. Exotic Hadrons from B Factories

    Science.gov (United States)

    Fulsom, Bryan

    2017-01-01

    The first generation of B-Factories, BaBar and Belle, operated over the previous decade and produced many world-leading measurements related to flavor physics. One of the most important discoveries was that of an apparent four-quark particle, named X(3872). It was the first of a growing X, Y, Z alphabet of exotic hadrons, now numbering more than a dozen, found by the e + e - collider experiments. These multi-quark states represent an unusual departure from the standard description that hadronic matter consists of only two or three quarks. These discoveries have led to the emergence of a new category of physics within heavy meson spectroscopy. This talk will review some of these key experimental results, and highlight the potential of the next generation B-Factory, Belle II, as it begins operation in the coming year.

  11. Optimization of Pb(II) biosorption by Robinia tree leaves using statistical design of experiments.

    Science.gov (United States)

    Zolgharnein, Javad; Shahmoradi, Ali; Sangi, Mohammad Reza

    2008-07-30

    The present study introduces Robinia tree leaves as a novel and efficient biosorbent for removing Pb(II) from aqueous solutions. In order to reduce the large number of experiments and find the highest removal efficiency of Pb(II), a set of full 2(3) factorial design with two blocks were performed in duplicate (16 experiments). In all experiments, the contact time was fixed at 25 min. The main interaction effects of the three factors including sorbent mass, pH and initial concentration of metal-ion were considered. By using Student's t-test and analysis of variances (ANOVA), the main factors, which had the highest effect on the removal process, were identified. Twenty-six experiments were designed according to Doehlert response surface design to obtain a mathematical model describing functional relationship between response and main independent variables. The most suitable regression model, that fitted the experimental data extremely well, was chosen according to the lack-of-fit-test and adjusted R(2) value. Finally, after checking for possible outliers, the optimum conditions for maximum removal of Pb(II) from aqueous solution were obtained. The best conditions were calculated to be as: initial concentration of Pb(II)=40 mg L(-1), pH 4.6 and concentration of sorbet equal to 27.3 g L(-1).

  12. Operating experience with factory-made air-insulated 1AC/2AC switchgear systems; Erste Betriebserfahrungen mit fabrikgefertigten, luftisolierten 1AC-/2AC-Schaltanlagen

    Energy Technology Data Exchange (ETDEWEB)

    Northe, J. [Balfour Beatty Rail GmbH, Offenbach (Germany); Loenard, D. [Bombardier Transportation GmbH, Mannheim (Germany)

    2007-07-01

    Today, factory-made air-insulated switchgear systems of the type TracFeed {sup registered} are available for all supply versions of 16.7 Hz and 50 Hz a.c. railways. These are supported by auxiliary equipment to ensure reliable railway operation through specific protective functions and a simplified line test. (orig.)

  13. Designing interactive technology for crowd experiences - beyond sanitization

    DEFF Research Database (Denmark)

    Veerasawmy, Rune

    2014-01-01

    This dissertation concerns the topic on designing interactive technology for crowd expe- riences. It takes the outset in the experience-oriented design approach within interaction design, exploring the research question how can we conceptually understand and design interactive technology for crowd...... in a conceptual model of social experiences that presents crowd experiences as a distinct type of social experience. This is different from what previously have been explored within experi- ence-oriented design. This dissertation is composed of four research papers framed by an overview that summarizes...... experience within interaction design. This dissertation introduces an understanding of crowd experience as a distinct type of social experiences driven by non-rational behavior. This conceptual understanding is established in the intersection between sociological crowd theory and a pragmatist perspective...

  14. Neutrino factories: realization and physics potential

    Energy Technology Data Exchange (ETDEWEB)

    Geer, S.; /Fermilab; Zisman, M.S.; /LBL, Berkeley

    2006-12-01

    Neutrino Factories offer an exciting option for the long-term neutrino physics program. This new type of neutrino facility will provide beams with unique properties. Low systematic uncertainties at a Neutrino Factory, together with a unique and precisely known neutrino flavor content, will enable neutrino oscillation measurements to be made with unprecedented sensitivity and precision. Over recent years, the resulting neutrino factory physics potential has been discussed extensively in the literature. In addition, over the last six years the R&D necessary to realize a Neutrino Factory has been progressing, and has developed into a significant international activity. It is expected that, within about five more years, the initial phase of this R&D program will be complete and, if the community chooses to build this new type of neutrino source within the following decade, neutrino factory technology will be ready for the final R&D phase prior to construction. In this paper (1) an overview is given of the technical ingredients needed for a Neutrino Factory, (2) beam properties are described, (3) the resulting neutrino oscillation physics potential is summarized, (4) a more detailed description is given for one representative Neutrino Factory design, and (5) the ongoing R&D program is summarized, and future plans briefly described.

  15. The Nearby Supernova Factory

    CERN Document Server

    Wood-Vasey, W M; Lee Byung Cheol; Loken, S; Nugent, P; Perlmutter, S; Siegrist, J L; Wang, L; Antilogus, P; Astier, Pierre; Hardin, D; Pain, R; Copin, Y; Smadja, G; Gangler, E; Castera, A; Adam, G; Bacon, R; Lemonnier, J P; Pecontal, A; Pécontal, E; Kessler, R

    2004-01-01

    The Nearby Supernova Factory (SNfactory) is an ambitious project to find and study in detail approximately 300 nearby Type Ia supernovae (SNe~Ia) at redshifts 0.03designed to use SNe to measure the cosmological parameters. The first key ingredient for this program is a reliable supply of Hubble-flow SNe systematically discovered in unprecedented numbers using the same techniques as those used in distant SNe searches. In 2002, 35 SNe were found using our test-bed pipeline for automated SN search and discovery. The pipeline uses images from the asteroid search conducted by the Near Earth Asteroid Tracking group at JPL. Improvements in our subtraction techniques and analysis have allowed us to increase our effective SN discovery rate to ~12 SNe/month in 2003.

  16. Maximum Autocorrelation Factorial Kriging

    DEFF Research Database (Denmark)

    Nielsen, Allan Aasbjerg; Conradsen, Knut; Pedersen, John L.

    2000-01-01

    This paper describes maximum autocorrelation factor (MAF) analysis, maximum autocorrelation factorial kriging, and its application to irregularly sampled stream sediment geochemical data from South Greenland. Kriged MAF images are compared with kriged images of varimax rotated factors from...

  17. Factorial PD-Clustering

    CERN Document Server

    Tortora, Cristina; Summa, Mireille Gettler

    2011-01-01

    Factorial clustering methods have been developed in recent years thanks to the improving of computational power. These methods perform a linear transformation of data and a clustering on transformed data optimizing a common criterion. Factorial PD-clustering is based on Probabilistic Distance clustering (PD-clustering). PD-clustering is an iterative, distribution free, probabilistic, clustering method. Factorial PD-clustering make a linear transformation of original variables into a reduced number of orthogonal ones using a common criterion with PD-Clustering. It is demonstrated that Tucker 3 decomposition allows to obtain this transformation. Factorial PD-clustering makes alternatively a Tucker 3 decomposition and a PD-clustering on transformed data until convergence. This method could significantly improve the algorithm performance and allows to work with large dataset, to improve the stability and the robustness of the method.

  18. Virtual Factory Testbed

    Data.gov (United States)

    Federal Laboratory Consortium — The Virtual Factory Testbed (VFT) is comprised of three physical facilities linked by a standalone network (VFNet). The three facilities are the Smart and Wireless...

  19. Experience economy meets business model design

    DEFF Research Database (Denmark)

    Gudiksen, Sune Klok; Smed, Søren Graakjær; Poulsen, Søren Bolvig

    2012-01-01

    companies automatically get a higher prize when offering an experience setting to the customer illustrated by the coffee example. Organizations that offer experiences still have an advantage but when an increasing number of organizations enter the experience economy the competition naturally gets tougher...

  20. Novel non-ionic surfactant proniosomes for transdermal delivery of lacidipine: optimization using 2(3) factorial design and in vivo evaluation in rabbits.

    Science.gov (United States)

    Soliman, Sara M; Abdelmalak, Nevine S; El-Gazayerly, Omaima N; Abdelaziz, Nabaweya

    2016-06-01

    Proniosomes offer a versatile vesicle drug delivery concept with potential for delivery of drugs via transdermal route. To develop proniosomal gel using cremophor RH 40 as non-ionic surfactant containing the antihypertensive drug lacidipine for transdermal delivery so as to avoid its extensive first pass metabolism and to improve its permeation through the skin. Proniosomes containing 1% lacidipine were prepared by the coacervation phase separation method, characterized, and optimized using a 2(3) full factorial design to define the optimum conditions to produce proniosomes with high entrapment efficiency, minimal vesicle size, and high-percentage release efficiency. The amount of cholesterol (X1), the amount of soya lecithin (X2), and the amount of cremophor RH 40 (X3) were selected as three independent variables. The system F4 was found to fulfill the maximum requisite of an optimum system because it had minimum vesicle size, maximum EE, maximum release efficiency, and maximum desirability. The optimized system (F4) was then converted to proniosomal gel using carbopol 940 (1% w/w). In vitro permeation through excised rabbit skin study revealed higher flux (6.48 ± 0.45) for lacidipine from the optimized proniosomal gel when compared with the corresponding emulgel (3.04 ± 0.13) mg/cm(2)/h. The optimized formulation was evaluated for its bioavailability compared with commercial product. Statistical analysis revealed significant increase in AUC (0 - α) 464.17 ± 113.15 ng h/ml compared with 209.02 ± 47.35 ng h/ml for commercial tablet. Skin irritancy and histopathological investigation of rat skin revealed its safety. Cremophor RH 40 proniosomal gel could be considered as very promising nanocarriers for transdermal delivery of lacidipine.

  1. Pituitary response to auditory stress: effect of treatment with alpha-methyl-p-tyrosine. Usefulness of a factorial mixed design for statistical analysis.

    Science.gov (United States)

    Collu, R; Jéquier, J

    1976-08-01

    Eight adult male rats were chronically cannulated in the jugular vein and placed individually in a sound-attenuated cubicle. Four of the animals were also implanted with a permanent cannula in the right lateral ventricle of the brain. Each animal was submitted twice to auditory stress at a 24-h interval. Before each stress, the rats were pretreated with either saline or alpha-methyl-p-tyrosine (alpha-MT), the order of administration of the drug and its vehicle being alternated in the eight rats. The injections were made either intravenously or intraventricularly. Auditory stress significantly depressed plasma growth hormone (GH) levels irrespective of the type of pretreatment. Mean plasma GH levels were significantly lower after alpha-MT pretreatment. alpha-MT pretreated animals had higher mean plasma corticosterone (B) levels which remained unchanged during stress. Plasma follicle stimulating hormone (FSH) levels were not modified by stress nor by alpha-MT pretreatment. The intraventricular administration of alpha-MT at a dose (20 mg/kg) which is ineffective by a systemic route produced the same effects on GH and B levels as the intravenous injection (250 mg/kg). These data seem to indicate that auditory stress exerts its inhibitory effect on GH secretion through a noncatecholaminergic pathway. They show, on the other hand, the existence of a central catecholaminergic tonus, stimulatory for GH and inhibitory for B. Statistical analysis was based on a factorial mixed design for repeated measurements after logarithmic transformation of the data. The purpose, advantages and limits of this procedure are presented and discussed.

  2. Gastroretentive Ranitidine Hydrochloride Tablets with Combined Floating and Bioadhesive Properties: Factorial Design Analysis, In Vitro Evaluation and In Vivo Abdominal X-Ray Imaging.

    Science.gov (United States)

    Abduljabbar, Hana N; Badr-Eldin, Shaimaa M; Aldawsari, Hibah M

    2015-01-01

    Ranitidine HCl is an H2-antagonist that suffers from low oral bioavailability of 50%. The site-specific absorption from the upper part of the small intestine and the colonic metabolism of the drug could partially contribute to its reduced bioavailability. To surmount these drawbacks, this work aimed at the formulation of Ranitidine HCl gastroretentive floating-biaodhesive tablets. A 3(2) factorial design was applied to assess the effects of matrix former (HPMC K100M): drug ratio, and the release retardant (Carbopol 971) amount on the characteristics of the tablets prepared using direct compression technique. The prepared tablets were thoroughly evaluated for physical properties, floating, swelling, bioadhesive and in vitro release behaviors. Statistical analysis of the results revealed significant effects for both formulation variables on the swelling index, maximum detachment force and cumulative percent drug released after 6 hours. In addition, the matrix- former: drug ratio showed a statistically significant effect on the floating lag time. Kinetic analysis of the release data indicated Higuchi diffusion kinetics and anomalous transport mechanism for all formulations. Scanning electron micrographs of the selected tablet formulation; F8, revealed intact surface without any perforations or channels in the dry state, while polymer expansion (relaxation) with some perforated areas were observed on the surface of the tablets after 12 hours dissolution in 0.1 N HCl. Furthermore, in vivo abdominal x-ray imaging showed good floating behavior of the selected formulation; F8, for up to 6 hours with appropriate bioadhesive property. In conclusion, the selected ranitidine HCl floating-bioadhesive tablets could be regarded as a promising gastroretentive drug delivery system that could deliver the drug at a controlled rate.

  3. The effect of stimulation therapy and donepezil on cognitive function in Alzheimer’s disease. A community based RCT with a two-by-two factorial design

    Directory of Open Access Journals (Sweden)

    Andersen Fred

    2012-07-01

    Full Text Available Abstract Background Progressive neurodegeneration in Alzheimer’s disease (AD induces cognitive deterioration, and there is controversy regarding the optimal treatment strategy in early AD. Stimulation therapy, including physical exercise and cholinesterase inhibitors are both reported to postpone cognitive deterioration in separate studies. We aimed to study the effect of stimulation therapy and the additional effect of donepezil on cognitive function in early AD. Method Design: A two-by-two factorial trial comprising stimulation therapy for one year compared to standard care to which a randomized double-blinded placebo controlled trial with donepezil was added. Setting: Nine rural municipalities in Northern Norway. Participants: 187 participants 65 years and older with a recent diagnosis of mild or moderate AD were included in the study of which 146 completed a one-year follow-up. INTERVENTIONS: In five municipalities the participants received stimulation therapy whereas participants in four received standard care. All participants were randomised double-blindly to donepezil or placebo and tested with three different cognitive tests four times during the one-year study period. Main outcome: Changes in MMSE sum score. Secondary outcome: Changes in ADAS-Cog and Clock Drawing Test. Results MMSE scores remained unchanged amongst AD participants receiving stimulation therapy and those receiving standard care. The results were consistent for ADAS-Cog and Clock Drawing Test. No time trend differences were found during one-year follow-up between groups receiving stimulation therapy versus standard care or between donepezil versus placebo. Conclusion In rural AD patients non-pharmacological and pharmacological therapy did not improve outcome compared with standard care but all groups retained cognitive function during one year follow-up. Other studies are needed to confirm these results. Trial registration ClinicalTrials.gov (Identifier: NCT00443014

  4. Evaluation of two evidence-based knowledge transfer interventions for physicians. A cluster randomized controlled factorial design trial: the CardioDAS Study.

    Science.gov (United States)

    Amsallem, Emmanuel; Kasparian, Christelle; Cucherat, Michel; Chabaud, Sylvie; Haugh, Margaret; Boissel, Jean-Pierre; Nony, Patrice

    2007-12-01

    To investigate the potential benefits of two modes of evidence-based knowledge transfer ('active' and 'passive' modes) in terms of improvement of intention of prescription, knowledge, and real prescription in practice, we performed an open randomized controlled trial (CardioDAS) using a factorial design (two tested interventions: 'active' and 'passive' knowledge transfer) and a hierarchical structure (cluster of physicians for each department level). The participants were cardiologists working in French public hospitals. In the 'passive' transfer group, cardiologists received evidence-based knowledge material (available on Internet) every week for a duration of 1 year. In the 'active' transfer group, two knowledge brokers (EA, PN) visited the participating departments (every 2 months for 1 year, 2 h per visit). The primary outcome consisted in the adjusted absolute mean variation of score (difference between post- and pre-study session) of answers to simulated cases assessing the intention to prescribe. Secondary outcomes were the variation of answers to a multiple-choice questionnaire (MCQ) assessing knowledge and of the conformity of real prescriptions to evidence-based reference assessing the behavioral change. Twenty-two French units (departments) of cardiology were randomized (72 participating cardiologists). In the 'active' transfer group, the primary outcome was more improved than that in the control (P = 0.031 at the department level, absolute mean improvement of 5 points/100). The change in knowledge transfer (MCQ) was also significant (P = 0.039 at the department level, absolute mean improvement of 6 points/100). However, no benefit was shown in terms of prescription conformity to evidence. For the 'passive' mode of knowledge transfer and for the three outcomes considered, no improvement was identified. CardioDAS findings confirm that 'active' knowledge transfer has some impact on participants' intent to prescribe and knowledge, but no effect on

  5. Web-based cognitive bias modification for problem drinkers: protocol of a randomised controlled trial with a 2x2x2 factorial design.

    Science.gov (United States)

    van Deursen, Denise S; Salemink, Elske; Smit, Filip; Kramer, Jeannet; Wiers, Reinout W

    2013-07-20

    The automatic tendency to attend to, positively evaluate and approach alcohol related stimuli has been found to play a causal role in problematic alcohol use and can be retrained by computerised Cognitive Bias Modification (CBM). In spite of CBMs potential as an internet intervention, little is known about the efficacy of web-based CBM. The study described in this protocol will test the effectiveness of web-based CBM in a double blind randomised controlled trial with a 2 (attention bias retraining: real versus placebo) x 2 (alcohol/no-go training: real versus placebo) x 2 (approach bias retraining: real versus placebo) factorial design. The effectiveness of 12 sessions of CBM will be examined among problem drinkers aged 18-65 who are randomly assigned to one of the eight CBM conditions, after completing two modules of a validated cognitive behavioural intervention, DrinkingLess. The primary outcome measure is the change in alcohol use. It is expected that, for each of the CBM interventions, participants in the real CBM conditions will show a greater decrease in alcohol use than participants in the placebo conditions. Secondary outcome measures include the percentage of participants drinking within the limits for sensible drinking. Possible mediating (change in automatic biases) and moderating (working memory, inhibition) factors will be examined, as will the comparative cost-effectiveness of the various CBM strategies. This study will be the first to test the relative efficacy of various web-based CBM strategies in problem drinkers. If proven effective, CBM could be implemented as a low-cost, low-threshold adjuvant to CBT-based online interventions for problem drinkers. Netherlands Trial register: NTR3875.

  6. Gellan gum-based mucoadhesive microspheres of almotriptan for nasal administration: Formulation optimization using factorial design, characterization, and in vitro evaluation

    Directory of Open Access Journals (Sweden)

    Zaheer Abbas

    2014-01-01

    Full Text Available Background: Almotriptan malate (ALM, indicated for the treatment of migraine in adults is not a drug candidate feasible to be administered through the oral route during the attack due to its associated symptoms such as nausea and vomiting. This obviates an alternative dosage form and nasal drug delivery is a good substitute to oral and parenteral administration. Materials and Methods: Gellan gum (GG microspheres of ALM, for intranasal administration were prepared by water-in-oil emulsification cross-linking technique employing a 2 3 factorial design. Drug to polymer ratio, calcium chloride concentration and cross-linking time were selected as independent variables, while particle size and in vitro mucoadhesion of the microspheres were investigated as dependent variables. Regression analysis was performed to identify the best formulation conditions. The microspheres were evaluated for characteristics such as practical percentage yield, particle size, percentage incorporation efficiency, swellability, zeta potential, in vitro mucoadhesion, thermal analysis, X-ray diffraction study, and in vitro drug diffusion studies. Results: The shape and surface characteristics of the microspheres were determined by scanning electron microscopy, which revealed spherical nature and nearly smooth surface with drug incorporation efficiency in the range of 71.65 ± 1.09% - 91.65 ± 1.13%. In vitro mucoadhesion was observed the range of 79.45 ± 1.69% - 95.48 ± 1.27%. Differential scanning calorimetry and X-ray diffraction results indicated a molecular level dispersion of drug in the microspheres. In vitro drug diffusion was Higuchi matrix controlled and the release mechanism was found to be non-Fickian. Stability studies indicated that there were no significant deviations in the drug content, in vitro mucoadhesion and in vitro drug diffusion characteristics. Conclusion: The investigation revealed promising potential of GG microspheres for delivering ALM

  7. Validated high-performance thin-layer chromatographic (HPTLC method for simultaneous determination of nadifloxacin, mometasone furoate, and miconazole nitrate cream using fractional factorial design

    Directory of Open Access Journals (Sweden)

    Kalpana G. Patel

    2016-07-01

    Full Text Available A high-performance thin-layer chromatographic method for simultaneous determination of nadifloxacin, mometasone furoate, and miconazole nitrate was developed and validated as per International Conference on Harmonization guidelines. High-performance thin-layer chromatographic separation was performed on aluminum plates precoated with silica gel 60F254 and methanol:ethyl acetate:toluene: acetonitrile:3M ammonium formate in water (1:2.5:6.0:0.3:0.2, % v/v as optimized mobile phase at detection wavelength of 224 nm. The retardation factor (Rf values for nadifloxacin, mometasone furoate, and miconazole nitrate were 0.23, 0.70, and 0.59, respectively. Percent recoveries in terms of accuracy for the marketed formulation were found to be 98.35–99.76%, 99.36–99.65%, and 99.16–100.25% for nadifloxacin, mometasone furoate, and miconazole nitrate, respectively. The pooled percent relative standard deviation for repeatability and intermediate precision studies was found to be < 2% for three target analytes. The effect of four independent variables, methanol content in total mobile phase, wavelength, chamber saturation time, and solvent front, was evaluated by fractional factorial design for robustness testing. Amongst all four factors, volume of methanol in mobile phase appeared to have a possibly significant effect on retention factor of miconazole nitrate compared with the other two drugs nadifloxacin and mometasone furoate, and therefore it was important to be carefully controlled. In summary, a novel, simple, accurate, reproducible, and robust high-performance thin-layer chromatographic method was developed, which would be of use in quality control of these cream formulations.

  8. Designing Experiments for Nonlinear Models - An Introduction

    OpenAIRE

    Johnson, Rachel T.; Montgomery, Douglas C.

    2009-01-01

    The article of record as published may be found at http://dx.doi.org/10.1002/qre.1063 We illustrate the construction of Bayesian D-optimal designs for nonlinear models and compare the relative efficiency of standard designs with these designs for several models and prior distributions on the parameters. Through a relative efficiency analysis, we show that standard designs can perform well in situations where the nonlinear model is intrinsically linear. However, if the model is non...

  9. CASE STUDIES OF USE OF DESIGN OF EXPERIMENTS IN MATERIAL RESEARCH

    Directory of Open Access Journals (Sweden)

    Salil Kumar Roy

    2003-01-01

    Full Text Available The paper describes principles of factorial and fractional factorial design of experiments. The various ways of analysing data obtained by these procedures are shown via four case studies. Yates method was followed in case 1 where the effect of anode type, carbon content of steel, temperature, and agitation on cathodic protection of steel in seawater, on current density, was studied. In case 2, a glass was formulated within 10 constituante melted, quantity water and tested for flow caracteristics, from the result the factor effect was calculated. In case 3, analysis of results is done in a very simple way. In this case, the effect of carbon content, surface condition, temperature, and agitation on the corrosion of steel in seawater was studied. In case 4, the effect of eleven constituents on acid resistance of a cast iron enamel has been studied through sixteen experimental compositions. This case gives a method to find out which of the sixteen experimental compositions is nearest to a target value.

  10. Photon Factory Activity Report, 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-31

    Photon Factory Activity Report no.12 deals with our activities in the period from October 1993 through September 1994. We operate two light sources at the Photon Factory; the 2.5-GeV Photon Factory storage ring, which is a dedicated light source, and the 6.5-GeV TRISTAN Accumulation Ring, which is parasitically used as a light source. We keep more than seventy experimental stations at two facilities, and accept experiments primarily according to approval by the Program Advisory Committee. The number of proposals to the Photon Factory has been still growing. Three-hundred eighty two proposals were approved by the PAC in FY1994, which is an increase by thirteen percent compared to the previous year. Remarkable was growth in biology proposals, particularly proposals in protein crystallography. In FY 1994, we accepted approximately 20,000 man-days as general users, and almost ten percent of them were from abroad. We always open the facility to users, not only domestic but also international. Recently we have been concentrating our effort to upgrading of the light sources and reconstruction of the experimental stations to keep the Photon Factory an attractive research facility in the forthcoming years. We have already started a program of reducing the emittance of the 2.5-GeV storage ring, which now operates with an emittance of 110 nm-rad, to 27 nm-rad by modifying the lattice, with the goal of operation at the reduced emittance in the fall of 1997. We also have conceived of a conversion of the TRISTAN Accumulation Ring to a dedicated light source of high energies. The on-going TRISTAN project will terminate by the end of 1995, and the TRISTAN Main Ring will be converted to a new B-Factory. At this moment, the TRISTAN Accumulation Ring will be disused as the injector to the Main Ring, and conversion of the AR to a dedicated light source becomes possible. (J.P.N.)

  11. 空调制冷自控系统在卷烟厂中的设计与应用%Design and Application of Air Conditioning Refrigeration Automatic Control System in Cigarette Factories

    Institute of Scientific and Technical Information of China (English)

    王静

    2012-01-01

    本文以上海卷烟厂为例,详细介绍了烟草行业建筑空调制冷自控系统的设计及应用。%This paper takes the project of Shanghai Cigarette Factory for example, introduces the design and application of building air conditioning refrigeration automatic control system in tobacco industry in detail .

  12. The Design and Implementation of Integrated Security System in Cigaretee Factory%卷烟厂综合安保系统的设计与实现

    Institute of Scientific and Technical Information of China (English)

    朱永东

    2011-01-01

    本文对延安卷烟厂的综合安保系统进行了简要介绍,展示了视频监控系统、防盗报警系统、一卡通系统、电子巡更系统在卷烟厂中的具体应用方式。%In this paper,the integrated security system of Yan'an cigarette factory has been briefed,and a application way has been showed for a video surveillance system,anti-theft alarm system,card systems and electronic patrol system in cigarette factory.

  13. A reference architecture for the component factory

    Science.gov (United States)

    Basili, Victor R.; Caldiera, Gianluigi; Cantone, Giovanni

    1992-01-01

    Software reuse can be achieved through an organization that focuses on utilization of life cycle products from previous developments. The component factory is both an example of the more general concepts of experience and domain factory and an organizational unit worth being considered independently. The critical features of such an organization are flexibility and continuous improvement. In order to achieve these features we can represent the architecture of the factory at different levels of abstraction and define a reference architecture from which specific architectures can be derived by instantiation. A reference architecture is an implementation and organization independent representation of the component factory and its environment. The paper outlines this reference architecture, discusses the instantiation process, and presents some examples of specific architectures by comparing them in the framework of the reference model.

  14. Applying experience reports in design education: Challenges and ideas

    NARCIS (Netherlands)

    Pasman, G.J.; Romero Herrera, N.A.

    2013-01-01

    What if both design students and design tutors could have real-time insights into how students actually experience their design process rather than after-the-fact reflections? And what if these insights could be applied in ways that would contribute to more in-depth learning experiences? This paper

  15. Determining the Parameters of Importance of a Graphene Synthesis Process Using Design-of-Experiments Method

    Directory of Open Access Journals (Sweden)

    Udit Narula

    2016-07-01

    Full Text Available A systematic method to identify key factors that control the synthesis of Physical Vapor Deposition (PVD-based graphene on copper is necessary for engineering graphene growth. The statistical design-of-experiments method is employed and demonstrated in this work in order to fulfill the necessity. Full-factorial design-of-experiments are performed to examine the significance of the main effects and the extent of the interactions of the controlling factors, which are responsible for the number of layers and the quality of the grown graphene. We found that a thinner amorphous carbon layer and a higher annealing temperature are suitable for the growth of mono-layer/few-layer graphene with low defects, while the effect of annealing time has a trade-off and needs to be optimized further. On the other hand, the same treatment, but with larger annealing times will result in multi-layer graphene and low defects. The results obtained from the analysis of the design-of-experiments are verified experimentally with Raman characterization.

  16. Designing mobile experiences for collocated interaction

    OpenAIRE

    Lundgren, Sus; Fischer, Joel; Reeves, Stuart; Torgersson, Olof

    2015-01-01

    Many of our everyday social interactions involve mobile devices. Yet, these tend to only provide good support for distributed social interactions. Although much HCI and CSCW research has explored how we might support collocated, face-to-face situations using mobile devices, much of this work exists as isolated exemplars of technical systems and / or interaction designs. This paper draws on a range of such exemplars to develop a practical design framework intended for guiding the design of new...

  17. Design Experiments and the Generation of Theory

    DEFF Research Database (Denmark)

    Nortvig, Anne-Mette

    2014-01-01

    When blended learning is introduced in professional education with strong traditions of physical activities and face-to-face interactions in the classroom, creation of new learning designs is needed both in the classroom and online. While some educators see the implementation of e...... methodology (DBR) and a participatory design approach was used in a case in physiotherapy education from the beginning of the implementation of e-learning in order to create learning designs for the new teaching context and generate theory in relation to this. Ict-based learning designs were created...

  18. Designing Effective Research Experiences for Undergraduates (Invited)

    Science.gov (United States)

    Jones Whyte, P.; Dalbotten, D. M.

    2009-12-01

    The undergraduate research experience has been recognized as a valuable component of preparation for graduate study. As competition for spaces in graduate schools become more keen students benefit from a formal introduction to the life of a scholar. Over the last twenty years a model of preparing students for graduate study with the research experience as the base has been refined at the University of Minnesota. The experience includes assignment with a faculty member and a series of seminars that support the experience. The seminars cover topics to include academic writing, scholarly literature review, writing of the abstract, research subject protection protocols, GRE test preparation, opportunities to interact with graduate student, preparing the graduate school application, and preparation of a poster to demonstrate the results of the research. The next phase of the process is to determine the role of the undergraduate research experience in the graduate school admission process.

  19. Computation for the analysis of designed experiments

    CERN Document Server

    Heiberger, Richard

    2015-01-01

    Addresses the statistical, mathematical, and computational aspects of the construction of packages and analysis of variance (ANOVA) programs. Includes a disk at the back of the book that contains all program codes in four languages, APL, BASIC, C, and FORTRAN. Presents illustrations of the dual space geometry for all designs, including confounded designs.

  20. An Architectural Experience for Interface Design

    Science.gov (United States)

    Gong, Susan P.

    2016-01-01

    The problem of human-computer interface design was brought to the foreground with the emergence of the personal computer, the increasing complexity of electronic systems, and the need to accommodate the human operator in these systems. With each new technological generation discovering the interface design problems of its own technologies, initial…

  1. An Architectural Experience for Interface Design

    Science.gov (United States)

    Gong, Susan P.

    2016-01-01

    The problem of human-computer interface design was brought to the foreground with the emergence of the personal computer, the increasing complexity of electronic systems, and the need to accommodate the human operator in these systems. With each new technological generation discovering the interface design problems of its own technologies, initial…

  2. 厂房内排雨水系统分析与设计%Analysis and Design of the Inner Rainwater System of Factory Buildings

    Institute of Scientific and Technical Information of China (English)

    田新莲; 崔云川

    2001-01-01

    The inner rainwater system of large factory buildings is analyzed and discussed in this paper.And the personal opinion is put forward.%对大型厂房内排雨水系统水流情况进行分析,对系统设计 进行了探讨,提出了个人的见解。

  3. Designing Technology for Active Spectator Experiences at Sporting Events

    DEFF Research Database (Denmark)

    Veerasawmy, Rune; Ludvigsen, Martin

    is not merely an experience of receiving and consuming entertainment. It is also heavily reliant on the active participation of the spectator in creating the atmosphere of the entire event. The BannerBattle experiment provides interactive technology in sport arenas with a form of interaction based on existing......This paper explores the active spectator experience at sporting events, by presenting and reflecting upon a design experiment carried out at a number of football1 events. The initial hypothesis of the design process, leading to the design experiment has been that the spectator experience...... behaviour in the context. The work presented also argues for a need to overcome the inclination to designing technological systems that imitate or compete with the experience of watching the television broadcast of the game. Experiments such as the presented BannerBattle are cornerstones in our exploratory...

  4. A Photogate Design for Air Track Experiments.

    Science.gov (United States)

    Hinrichsen, P. F.

    1988-01-01

    Introduces a photogate arrangement using a photo-reflective sensor for air track experiments. Reports that the sensitivity to sunlight can be eliminated and a mechanically more convenient package produced. Shows the mounting, circuit, and usage of the photogate. (YP)

  5. The Design, Experience and Practice of Networked Learning

    DEFF Research Database (Denmark)

    Gleerup, Janne; Heilesen, Simon; Helms, Niels Henrik

    2014-01-01

    . The Design, Experience and Practice of Networked Learning will prove indispensable reading for researchers, teachers, consultants, and instructional designers in higher and continuing education; for those involved in staff and educational development, and for those studying post graduate qualifications...

  6. Statistical Analysis of Designed Experiments Theory and Applications

    CERN Document Server

    Tamhane, Ajit C

    2012-01-01

    A indispensable guide to understanding and designing modern experiments The tools and techniques of Design of Experiments (DOE) allow researchers to successfully collect, analyze, and interpret data across a wide array of disciplines. Statistical Analysis of Designed Experiments provides a modern and balanced treatment of DOE methodology with thorough coverage of the underlying theory and standard designs of experiments, guiding the reader through applications to research in various fields such as engineering, medicine, business, and the social sciences. The book supplies a foundation for the

  7. An Epiphany in a Toilet Factory

    Science.gov (United States)

    Cobb, Catlin

    2009-01-01

    In this article, the author shares her experiences of the universality of art making and artistic experience of being a dancer and teaching artist. She describes her performance at Kohler, a worldwide leader in plumbing products in Spartanburg, South Carolina, where she had an epiphany dancing in a toilet factory--a sudden, intuitive moment of…

  8. An Epiphany in a Toilet Factory

    Science.gov (United States)

    Cobb, Catlin

    2009-01-01

    In this article, the author shares her experiences of the universality of art making and artistic experience of being a dancer and teaching artist. She describes her performance at Kohler, a worldwide leader in plumbing products in Spartanburg, South Carolina, where she had an epiphany dancing in a toilet factory--a sudden, intuitive moment of…

  9. Hybrid Rocket Experiment Station for Capstone Design

    Science.gov (United States)

    Conley, Edgar; Hull, Bethanne J.

    2012-01-01

    Portable hybrid rocket motors and test stands can be seen in many papers but none have been reported on the design or instrumentation at such a small magnitude. The design of this hybrid rocket and test stand is to be small and portable (suitcase size). This basic apparatus will be used for demonstrations in rocket propulsion. The design had to include all of the needed hardware to operate the hybrid rocket unit (with the exception of the external Oxygen tank). The design of this project includes making the correlation between the rocket's thrust and its size, the appropriate transducers (physical size, resolution, range, and cost), compatability with a laptop analog card, the ease of setup, and its portability.

  10. User experience (UX) design for libraries

    CERN Document Server

    Schmidt, Aaron

    2012-01-01

    This book shows you how to get there by providing hands-on steps and best practices for UX design principles, practices, and tools to engage with patrons online and build the best web presence for your library.

  11. Design Experiments and the Generation of Theory

    DEFF Research Database (Denmark)

    Nortvig, Anne-Mette

    2014-01-01

    When blended learning is introduced in professional education with strong traditions of physical activities and face-to-face interactions in the classroom, creation of new learning designs is needed both in the classroom and online. While some educators see the implementation of e-learning and bl...... be rewarding to couple DBR with a grounded theory approach in order to be able both to capture the data that emerge in a project that follows its own agenda and to generate theory on a context that is changing....... methodology (DBR) and a participatory design approach was used in a case in physiotherapy education from the beginning of the implementation of e-learning in order to create learning designs for the new teaching context and generate theory in relation to this. Ict-based learning designs were created...

  12. Designing the user experience of game development tools

    CERN Document Server

    Lightbown, David

    2015-01-01

    The Big Green Button My Story Who Should Read this Book? Companion Website and Twitter Account Before we BeginWelcome to Designing the User Experience of Game Development ToolsWhat Will We Learn in This Chapter?What Is This Book About?Defining User ExperienceThe Value of Improving the User Experience of Our ToolsParallels Between User Experience and Game DesignHow Do People Benefit From an Improved User Experience?Finding the Right BalanceWrapping UpThe User-Centered Design ProcessWhat Will We

  13. Thermal Characterization of Functionally Graded Materials: Design of Optimum Experiments

    Science.gov (United States)

    Cole, Kevin D.

    2003-01-01

    This paper is a study of optimal experiment design applied to the measure of thermal properties in functionally graded materials. As a first step, a material with linearly-varying thermal properties is analyzed, and several different tran- sient experimental designs are discussed. An optimality criterion, based on sen- sitivity coefficients, is used to identify the best experimental design. Simulated experimental results are analyzed to verify that the identified best experiment design has the smallest errors in the estimated parameters. This procedure is general and can be applied to design of experiments for a variety of materials.

  14. The Smart Factory

    DEFF Research Database (Denmark)

    Radziwon, Agnieszka; Bilberg, Arne; Bogers, Marcel

    2014-01-01

    Nowadays we live in a world, which a decade ago would only be described in the science fiction literature. More and more things become smart and both scientists and engineers strive for developing not only new and innovative devices, but also homes, factories, or even cities. Despite of continuous...... development, many of those concepts are still being just a vision of the future, which still needs a lot of effort to become true. This paper reviews the usage of adjective smart in respect to technology and with a special emphasis on the smart factory concept placement among contemporary studies. Due...... to a lack of a consensus of common understanding of this term, a unified definition is proposed. The conceptualization will not only refer to various smart factory visions reported in the literature, but also link the crucial characteristics of this emerging manufacturing concept to usual manufacturing...

  15. Cell Factory Engineering.

    Science.gov (United States)

    Davy, Anne Mathilde; Kildegaard, Helene Faustrup; Andersen, Mikael Rørdam

    2017-03-22

    Rational approaches to modifying cells to make molecules of interest are of substantial economic and scientific interest. Most of these efforts aim at the production of native metabolites, expression of heterologous biosynthetic pathways, or protein expression. Reviews of these topics have largely focused on individual strategies or cell types, but collectively they fall under the broad umbrella of a growing field known as cell factory engineering. Here we condense >130 reviews and key studies in the art into a meta-review of cell factory engineering. We identified 33 generic strategies in the field, all applicable to multiple types of cells and products, and proven successful in multiple major cell types. These apply to three major categories: production of native metabolites and/or bioactives, heterologous expression of biosynthetic pathways, and protein expression. This meta-review provides general strategy guides for the broad range of applications of rational engineering of cell factories.

  16. Colorful Microbial Cell Factories

    DEFF Research Database (Denmark)

    Petersen, Pia Damm

    Yeast cell factories are powerful tools used for the production of high-value natural compounds otherwise not easily available. Many bioactive and industrially important plant secondary metabolites can be produced in yeast by engineering their biosynthetic pathways into yeast cells, as these both...... anthocyanins. Yeast cell factories present a platform to circumvent the problem of low yields of interesting molecular structures in plant tissues, as hand-picking of desired enzyme activities allows for specific biosynthesis of the precise pigment of interest, as well as choosing more stable structures...... for heterologous biosynthesis is possible. In cell factories, great improvements in yields can be achieved through molecular engineering of flux from endogenous yeast precursors, e.g. by elimination of by-product formation, and by genetic optimization of pathway components, such as fine-tuning of expression levels...

  17. OPERA experiment

    CERN Document Server

    Komatsu, M

    2003-01-01

    OPERA is an accelerator experiment designed to explore Super- Kamiokande suggested nu//mu arrow left right nu//tau oscillation region in CNGS beam from CERN to LNGS. The key technique in OPERA is modern emulsion read out which applied to CHORUS and DONUT experiments. ECC technique which used in DONUT and OPERA has good modularity to enlarge apparatus for future Neutrino Factory experiments.

  18. Development of a biodegradable nanoparticle platform for sildenafil: formulation optimization by factorial design analysis combined with application of charge-modified branched polyesters.

    Science.gov (United States)

    Beck-Broichsitter, Moritz; Schmehl, Thomas; Gessler, Tobias; Seeger, Werner; Kissel, Thomas

    2012-02-10

    Biodegradable nanoparticles have gained tremendous attraction as carriers for controlled drug delivery to the lung. Despite numerous advances in the field, e.g. development of suitable methods for pulmonary administration of polymeric nanoparticles, a sufficient association of the therapeutic agent with the carrier system as well as drug release in a controlled fashion remain considerable challenges. Hence, this study examines the optimization of biodegradable sildenafil-loaded nanoparticle formulations intended for aerosol treatment of pulmonary hypertension. A factorial design analysis was employed to identify the important experimental factors involved in the preparation of nanoparticles by the solvent evaporation technique. The effect of tailored charge-modified branched polyesters on drug loading and in vitro drug release from nanoparticles was also evaluated. Moreover, colloidal stability of obtained nanoparticles was assessed, and stabilization of nanoparticles by lyophilization was accomplished without additional excipients. Essential experimental factors were identified and optimized to allow the preparation of nanoparticles composed of linear polyesters with a sildenafil content of ~5 wt.%. The in vitro drug release profile from these nanoparticles demonstrated a sustained release of sildenafil over ~90 min. Application of charge-modified branched polyesters enhanced the drug content in nanoparticles and drug release profile, according to the charge-density present in the employed polymer. Accordingly an increase in drug loading by a factor of ~1.4, a prolonged drug release profile from nanoparticles over ~240 min was achieved. Sildenafil release from nanoparticles made of linear and charge-modified branched polyesters was governed by a diffusion process. The obtained drug diffusion coefficients were decreased as the charge-density present in the applied polymer was increased, which promotes the strategy to improve drug loading and release rates by

  19. Effect of hexacosanol on the characteristics of novel sustained-release allopurinol solid lipospheres (SLS): factorial design application and product evaluation.

    Science.gov (United States)

    El-Gibaly, I; Abdel-Ghaffar, S K

    2005-04-27

    This investigation involved the evaluation of the effect of hexacosanol (HC, ceryl alcohol), a new hydrophobic wax modifier (WM) in comparison with conventional modifiers, on the development of sustained-release allopurinol (AP) solid lipospheres (SLS) intended for use in a suspension formulation and other oral dosage forms. Various beeswax (BW)/WM blends (composition ratio 1:1) were thus used to prepare SLS by a modified oil-in-water emulsion meltable disperse-phase (MDP) encapsulation method without using organic solvents and the influence of these blends on the drug encapsulation efficiency (EE), size distribution and the time for 50% of the drug to be released (t50%) was investigated. Results indicated that incorporation of HC in wall matrix of SLS provided the means to enhance the EE of AP and to modulate the rate of drug release into dissolution media (simulated gastric fluid (S.G.F.: pH 1.2) and simulated intestinal fluid (S.I.F.: pH 7.4). The effects of the process variables; HC concentration, dispersant (pluronic F-68: PF-68) concentration and drug:wax ratio were also studied on the properties of AP-loaded SLS by a 2(3) factorial design. The EE values were in the range of 80.8-92.67%. The only significant parameter affecting (P<0.01) the size and size distribution of the SLS formulations was the amount of the PF-68, whereas the factor with the biggest influence (P<0.05) on the drug EE was the initial loading of AP (in terms of the drug:wax ratio). The amount of HC blended with wax and the initial drug loading significantly (P<0.01) affected the t50% values of all of the formulations. The release of AP was more extended (t50% values (S.I.F.; pH 7.4)=9.91-25.36 h, depending on the drug:wax ratio) and surface morphology of SLS was improved with higher HC content (15%, w/w) formulations. The release patterns fitted the Baker-Lonsdale dissolution kinetics for spherical matrices. A significant decrease of plasma uric acid levels (P<0.05) and hepatic impairment

  20. Hypersonic drone vehicle design: A multidisciplinary experience

    Science.gov (United States)

    1988-01-01

    UCLA's Advanced Aeronautic Design group focussed their efforts on design problems of an unmanned hypersonic vehicle. It is felt that a scaled hypersonic drone is necesary to bridge the gap between present theory on hypersonics and the future reality of the National Aerospace Plane (NASP) for two reasons: (1) to fulfill a need for experimental data in the hypersonic regime, and (2) to provide a testbed for the scramjet engine which is to be the primary mode of propulsion for the NASP. The group concentrated on three areas of great concern to NASP design: propulsion, thermal management, and flight systems. Problem solving in these areas was directed toward design of the drone with the idea that the same design techniques could be applied to the NASP. A 70 deg swept double-delta wing configuration, developed in the 70's at the NASA Langley, was chosen as the aerodynamic and geometric model for the drone. This vehicle would be air launched from a B-1 at Mach 0.8 and 48,000 feet, rocket boosted by two internal engines to Mach 10 and 100,000 feet, and allowed to cruise under power of the scramjet engine until burnout. It would then return to base for an unpowered landing. Preliminary energy calculations based on flight requirements give the drone a gross launch weight of 134,000 pounds and an overall length of 85 feet.

  1. Designing interactive technology for crowd experiences - beyond sanitization

    DEFF Research Database (Denmark)

    Veerasawmy, Rune

    2014-01-01

    experience within interaction design. This dissertation introduces an understanding of crowd experience as a distinct type of social experiences driven by non-rational behavior. This conceptual understanding is established in the intersection between sociological crowd theory and a pragmatist perspective...... sanitization. The domain of my experimental design inquiries is at sporting events. From extensive theoretical studies and my empirical explorations I present a perspective on modern and professionalized sporting events as sanitized, where the spectator experiences and technology are being produced, controlled......This dissertation concerns the topic on designing interactive technology for crowd expe- riences. It takes the outset in the experience-oriented design approach within interaction design, exploring the research question how can we conceptually understand and design interactive technology for crowd...

  2. Evolutionary experience design – the case of Otopia

    DEFF Research Database (Denmark)

    Hansen, Kenneth

    used as a means of specifying the basic immaterial design form. This discussion leads to the suggestion of a rule-based evolutionary model for the design of situations as a practical option for designers of new spectator oriented experiences in the future The project of Otopia was supported......The design of experiences is a complicated challenge. It might not even be possible to design such a “thing”, but only to design for it. If this is the case it could seem appropriate with an evolutionary approach. This paper introduces such an approach to the design of new public oriented...... experiences with the case of “Otopia”. “Otopia” is a large scale, new media experiment, which combines the areas of computer games, sports and performance in to a spectator oriented concept; it was premiered in a dome tent at the Roskilde Festival in Denmark the summer 2005. This paper presents and discusses...

  3. Modal identification experiment design for large space structures

    Science.gov (United States)

    Kim, Hyoung M.; Doiron, Harold H.

    1991-01-01

    This paper describes an on-orbit modal identification experiment design for large space structures. Space Station Freedom (SSF) systems design definition and structural dynamic models were used as representative large space structures for optimizing experiment design. Important structural modes of study models were selected to provide a guide for experiment design and used to assess the design performance. A pulsed random excitation technique using propulsion jets was developed to identify closely-spaced modes. A measuremenat location selection approach was developed to estimate accurate mode shapes as well as frequencies and damping factors. The data acquisition system and operational scenarios were designed to have minimal impacts on the SSF. A comprehensive simulation was conducted to assess the overall performance of the experiment design.

  4. Design Optimisation of a High Intensity Beam Facility and Feasibility Experiment of a Solid Fragmented Target

    CERN Document Server

    Charitonidis, Nikolaos; Rivkin, Leonid

    2014-06-13

    The present PhD thesis describes the design, execution and results of the HRMT-10 experiment performed at the HiRadMat facility of the CERN/SPS complex. The first part of the thesis covers the design optimization studies of the HiRadMat facility, focusing in particular on the radiation protection issues. A detailed Monte-Carlo model of the facility has been developed and validated through comparison with measurements. A very satisfactory agreement between the simulation and the experimental data is observed. In the second part of this thesis, a novel feasibility experiment of a fragmented solid target for a future Neutrino Factory or a Super Beam facility, able to support high beam powers ( 1 MW) is presented in detail. A solid granular target has been proposed as an interesting alternative to an open Hg jet target, presently considered as the baseline for such facilities, but posing considerable technical challenges. The HRMT-10 experiment seeks to address the lack of experimental data of the feasibility of...

  5. Designing Learning Experiences for Deeper Understanding

    Science.gov (United States)

    Stripling, Barbara K.; Harada, Violet H.

    2012-01-01

    Planning is the less visible part of the teaching and learning process; however, it serves as the blueprint for student learning. To conceptualize the unit or project as a holistic learning experience, the authors created the C.L.E.A.R. G.O.A.L.S. guidelines that address the major elements of unit planning. An essential step is identifying the…

  6. Interdisciplinary parametric design: the XXL experience

    NARCIS (Netherlands)

    Turrin, M.; Sariyildiz, I.S.; Paul, J.C.

    2015-01-01

    Focusing on large span structures for sport buildings, the paper tackles the role of parametric modelling and performance simulations, to enhance the integration between architectural and engineering design. The general approach contrasts post-engineering processes. In post-engineering, technical pe

  7. Carbon Pricing: Design, Experiences and Issues

    DEFF Research Database (Denmark)

    , which has negative implications for the future of our environment. In light of these negative developments, it is important to understand the benefits of environmental sustainability through well-documented research. This discerning book considers the design of carbon taxes and examines...

  8. Hypersonic drone design: A multidisciplinary experience

    Science.gov (United States)

    1988-01-01

    Efforts were focused on design problems of an unmanned hypersonic vehicle. It is felt that a scaled hypersonic drone is necessary to bridge the gap between present theory on hypersonics and the future reality of the National Aerospace Plane (NASP) for two reasons: to fulfill a need for experimental data in the hypersonic regime, and to provide a testbed for the scramjet engine which is to be the primary mode of propulsion for the NASP. Three areas of great concern to NASP design were examined: propulsion, thermal management, and flight systems. Problem solving in these areas was directed towards design of the drone with the idea that the same design techniques could be applied to the NASP. A seventy degree swept double delta wing configuration, developed in the 70's at NASA Langley, was chosen as the aerodynamic and geometric model for the drone. This vehicle would be air-launched from a B-1 at Mach 0.8 and 48,000 feet, rocket boosted by two internal engines to Mach 10 and 100,000 feet, and allowed to cruise under power of the scramjet engine until burnout. It would then return to base for an unpowered landing. Preliminary energy calculations based upon the flight requirements give the drone a gross launch weight of 134,000 lb. and an overall length of 85 feet.

  9. Interdisciplinary parametric design: the XXL experience

    NARCIS (Netherlands)

    Turrin, M.; Sariyildiz, I.S.; Paul, J.C.

    2015-01-01

    Focusing on large span structures for sport buildings, the paper tackles the role of parametric modelling and performance simulations, to enhance the integration between architectural and engineering design. The general approach contrasts post-engineering processes. In post-engineering, technical

  10. The Role of Fiction in Experiments within Design, Art & Architecture

    DEFF Research Database (Denmark)

    Knutz, Eva; Markussen, Thomas; Christensen, Poul Rind

    2013-01-01

    This paper offers a typology for understanding design fiction as a new approach in design research. The typology allows design researchers to explain design fictions according to 5 criteria: (1) “What if scenarios” as the basic construal principle of design fiction; (2) the manifestation...... of critique; (3) design aims; (4) materializations and forms; and (5) the aesthetic of design fictions. The typology is premised on the idea that fiction may integrate with reality in many different ways in design experiments. The explanatory power of the typology is exemplified through the analyses of 6 case...

  11. Evolutionary experience design – the case of Otopia

    DEFF Research Database (Denmark)

    Hansen, Kenneth

    The design of experiences is a complicated challenge. It might not even be possible to design such a “thing”, but only to design for it. If this is the case it could seem appropriate with an evolutionary approach. This paper introduces such an approach to the design of new public oriented...... the overall development and design of the concept. First, the project is introduced and a model of the concept is outlined. Then the basic design objects are presented and a discussion of their various forms is initiated. Special attention is given here to the way the evolutionary design of rules has been...... used as a means of specifying the basic immaterial design form. This discussion leads to the suggestion of a rule-based evolutionary model for the design of situations as a practical option for designers of new spectator oriented experiences in the future The project of Otopia was supported...

  12. Experiences with Voice to Design Ceramics

    DEFF Research Database (Denmark)

    Hansen, Flemming Tvede; Jensen, Kristoffer

    2013-01-01

    This article presents SoundShaping, a system to create ceramics from the human voice and thus how digital technology makes new possibilities in ceramic craft. The article is about how experiential knowledge that the craftsmen gains in a direct physical and tactile interaction with a responding....... The shape is output to a 3D printer to make ceramic results. The system demonstrates the close connection between digital technology and craft practice. Several experiments and reflections demonstrate the validity of this work....

  13. Experiences with voice to design ceramics

    DEFF Research Database (Denmark)

    Hansen, Flemming Tvede; Jensen, Kristoffer

    2014-01-01

    This article presents SoundShaping, a system to create ceramics from the human voice and thus how digital technology makes new possibilities in ceramic craft. The article is about how experiential knowledge that the craftsmen gains in a direct physical and tactile interaction with a responding....... The shape is output to a 3D printer to make ceramic results. The system demonstrates the close connection between digital technology and craft practice. Several experiments and reflections demonstrate the validity of this work....

  14. Designing for user experiences in specific contexts: contributions from contextmapping

    NARCIS (Netherlands)

    Schifferstein, H.N.J.; Sleeswijk Visser, F.

    2013-01-01

    In saturated consumer markets, consumer choices often depend on subtle product differences that contribute positively to their user experiences. Hence, it is important for designers to be able to create products that elicit different experiences. In this chapter we discuss a design approach that tak

  15. Integrating PCLIPS into ULowell's Lincoln Logs: Factory of the future

    Science.gov (United States)

    Mcgee, Brenda J.; Miller, Mark D.; Krolak, Patrick; Barr, Stanley J.

    1990-01-01

    We are attempting to show how independent but cooperating expert systems, executing within a parallel production system (PCLIPS), can operate and control a completely automated, fault tolerant prototype of a factory of the future (The Lincoln Logs Factory of the Future). The factory consists of a CAD system for designing the Lincoln Log Houses, two workcells, and a materials handling system. A workcell consists of two robots, part feeders, and a frame mounted vision system.

  16. The Clone Factory

    Science.gov (United States)

    Stoddard, Beryl

    2005-01-01

    Have humans been cloned? Is it possible? Immediate interest is sparked when students are asked these questions. In response to their curiosity, the clone factory activity was developed to help them understand the process of cloning. In this activity, students reenact the cloning process, in a very simplified simulation. After completing the…

  17. The DESI Experiment Part II: Instrument Design

    OpenAIRE

    DESI Collaboration; Aghamousa, Amir; Aguilar, Jessica; Ahlen, Steve; Alam, Shadab; Allen, Lori E.; Prieto, Carlos Allende; Annis, James; Bailey, Stephen; Balland, Christophe; Ballester, Otger; Baltay, Charles; Beaufore, Lucas; Bebek, Chris; Beers, Timothy C.

    2016-01-01

    DESI (Dark Energy Spectropic Instrument) is a Stage IV ground-based dark energy experiment that will study baryon acoustic oscillations and the growth of structure through redshift-space distortions with a wide-area galaxy and quasar redshift survey. The DESI instrument is a robotically-actuated, fiber-fed spectrograph capable of taking up to 5,000 simultaneous spectra over a wavelength range from 360 nm to 980 nm. The fibers feed ten three-arm spectrographs with resolution $R= \\lambda/\\Delta...

  18. Student designed experiments to learn fluids

    Science.gov (United States)

    Stern, Catalina

    2013-11-01

    Lasers and high speed cameras are a wonderful tool to visualize the very complex behavior of fluids, and to help students grasp concepts like turbulence, surface tension and vorticity. In this work we present experiments done by physics students in their senior year at the School of Science of the National University of Mexico as a final project in the continuum mechanics course. Every semester, the students make an oral presentation of their work and videos and images are kept in the web page ``Pasión por los Fluidos''. I acknowledge support from the Physics Department of Facultad de Ciencias, Universidad Nacional Autónoma de México.

  19. Statistical modeling of sugar cane potential bud sprouting within the context of a 3x3x2 factorial experiment Modelado estadístico de la brotación potencial de caña de azúcar en un experimento factorial 3x3x2

    Directory of Open Access Journals (Sweden)

    Osvaldo E. A. Arce

    Full Text Available The aim of this study was to model sugarcane potential bud sprouting temporal evolution within the context of a 3x3x2 factorial experiment. Statistical modeling was accomplished by means of a three-parameter logistic model using nonlinear mixed models. The trial was carried out with seed cane from three varieties (LCP 85-384, CP 65-357 and CP 48-103, considering three harvesting dates (May, August, and October and two seed cane origins (micropropagation and hot water treatment. Experimental units were distributed in a 3x3x2 completely randomized factorial arrangement with two replicates. The number of sprouts was recorded from the day after plantation up to the 21st day. The selection of effects associated with a particular parameter was made by means of backward selection. Once the significant effects were selected, the need for the corresponding random effect was tested. The same procedure was followed with the rest of the parameters. Heteroscedasticity was corrected using a power variance function and autocorrelation of residuals was included as an order 1 autoregressive model. After statistical modeling, the conclusion to be drawn is that the methodology of nonlinear mixed models is an adequate and powerful tool when analyzing data obtained from factorial experiments, where repeated measurements over a period of time have been recorded.El objetivo del trabajo fue modelar la evolución temporal de la brotación potencial en caña de azúcar, en el contexto de un experimento factorial 3x3x2. El modelado se hizo mediante el modelo logístico de tres parámetros, utilizándose modelos mixtos no lineales. Se trabajó con caña semilla de tres variedades (LCP 85-384, CP 65-357 y CP 48-103, tres épocas de cosecha (mayo, agosto y octubre y dos orígenes de la semilla (micropropagación y propagación convencional por estacas termotratadas. Las unidades experimentales se ubicaron en un arreglo factorial 3x3x2 completamente aleatorizado con dos

  20. Relaying experiences for care home design

    DEFF Research Database (Denmark)

    Raudaskoski, Pirkko Liisa

    2014-01-01

    stakeholders (researchers, family members, etc.) could put forward their ideas and wishes about the facilities of a soon-to-be-built care home for people with brain injury. In other words, the seminar was part of a wider diagnostic endeavor that was to be started in a specially designed building. The future......The paper discusses organizational planning and decision making as situated material-semiotic practices in which various local and non-local meaningful elements (e.g. texts and photos) are invocated and resemiotized. The discussion is based on an analysis of a seminar meeting where different...