WorldWideScience

Sample records for factor analytic models

  1. Analytic Couple Modeling Introducing Device Design Factor, Fin Factor, Thermal Diffusivity Factor, and Inductance Factor

    Science.gov (United States)

    Mackey, Jon; Sehirlioglu, Alp; Dynys, Fred

    2014-01-01

    A set of convenient thermoelectric device solutions have been derived in order to capture a number of factors which are previously only resolved with numerical techniques. The concise conversion efficiency equations derived from governing equations provide intuitive and straight-forward design guidelines. These guidelines allow for better device design without requiring detailed numerical modeling. The analytical modeling accounts for factors such as i) variable temperature boundary conditions, ii) lateral heat transfer, iii) temperature variable material properties, and iv) transient operation. New dimensionless parameters, similar to the figure of merit, are introduced including the device design factor, fin factor, thermal diffusivity factor, and inductance factor. These new device factors allow for the straight-forward description of phenomenon generally only captured with numerical work otherwise. As an example a device design factor of 0.38, which accounts for thermal resistance of the hot and cold shoes, can be used to calculate a conversion efficiency of 2.28 while the ideal conversion efficiency based on figure of merit alone would be 6.15. Likewise an ideal couple with efficiency of 6.15 will be reduced to 5.33 when lateral heat is accounted for with a fin factor of 1.0.

  2. Bayesian Constrained-Model Selection for Factor Analytic Modeling

    OpenAIRE

    Peeters, Carel F.W.

    2016-01-01

    My dissertation revolves around Bayesian approaches towards constrained statistical inference in the factor analysis (FA) model. Two interconnected types of restricted-model selection are considered. These types have a natural connection to selection problems in the exploratory FA (EFA) and confirmatory FA (CFA) model and are termed Type I and Type II model selection. Type I constrained-model selection is taken to mean the determination of the appropriate dimensionality of a model. This type ...

  3. Principal component and factor analytic models in international sire evaluation

    Directory of Open Access Journals (Sweden)

    Jakobsen Jette

    2011-09-01

    Full Text Available Abstract Background Interbull is a non-profit organization that provides internationally comparable breeding values for globalized dairy cattle breeding programmes. Due to different trait definitions and models for genetic evaluation between countries, each biological trait is treated as a different trait in each of the participating countries. This yields a genetic covariance matrix of dimension equal to the number of countries which typically involves high genetic correlations between countries. This gives rise to several problems such as over-parameterized models and increased sampling variances, if genetic (covariance matrices are considered to be unstructured. Methods Principal component (PC and factor analytic (FA models allow highly parsimonious representations of the (covariance matrix compared to the standard multi-trait model and have, therefore, attracted considerable interest for their potential to ease the burden of the estimation process for multiple-trait across country evaluation (MACE. This study evaluated the utility of PC and FA models to estimate variance components and to predict breeding values for MACE for protein yield. This was tested using a dataset comprising Holstein bull evaluations obtained in 2007 from 25 countries. Results In total, 19 principal components or nine factors were needed to explain the genetic variation in the test dataset. Estimates of the genetic parameters under the optimal fit were almost identical for the two approaches. Furthermore, the results were in a good agreement with those obtained from the full rank model and with those provided by Interbull. The estimation time was shortest for models fitting the optimal number of parameters and prolonged when under- or over-parameterized models were applied. Correlations between estimated breeding values (EBV from the PC19 and PC25 were unity. With few exceptions, correlations between EBV obtained using FA and PC approaches under the optimal fit were

  4. Exploring the Different Trajectories of Analytical Thinking Ability Factors: An Application of the Second-Order Growth Curve Factor Model

    Science.gov (United States)

    Saengprom, Narumon; Erawan, Waraporn; Damrongpanit, Suntonrapot; Sakulku, Jaruwan

    2015-01-01

    The purposes of this study were 1) Compare analytical thinking ability by testing the same sets of students 5 times 2) Develop and verify whether analytical thinking ability of students corresponds to second-order growth curve factors model. Samples were 1,093 eighth-grade students. The results revealed that 1) Analytical thinking ability scores…

  5. Exploring the Different Trajectories of Analytical Thinking Ability Factors: An Application of the Second-Order Growth Curve Factor Model

    Science.gov (United States)

    Saengprom, Narumon; Erawan, Waraporn; Damrongpanit, Suntonrapot; Sakulku, Jaruwan

    2015-01-01

    The purposes of this study were 1) Compare analytical thinking ability by testing the same sets of students 5 times 2) Develop and verify whether analytical thinking ability of students corresponds to second-order growth curve factors model. Samples were 1,093 eighth-grade students. The results revealed that 1) Analytical thinking ability scores…

  6. Factors Affecting Higher Order Thinking Skills of Students: A Meta-Analytic Structural Equation Modeling Study

    Science.gov (United States)

    Budsankom, Prayoonsri; Sawangboon, Tatsirin; Damrongpanit, Suntorapot; Chuensirimongkol, Jariya

    2015-01-01

    The purpose of the research is to develop and identify the validity of factors affecting higher order thinking skills (HOTS) of students. The thinking skills can be divided into three types: analytical, critical, and creative thinking. This analysis is done by applying the meta-analytic structural equation modeling (MASEM) based on a database of…

  7. Comparing factor analytic models of the DSM-IV personality disorders.

    Science.gov (United States)

    Huprich, Steven K; Schmitt, Thomas A; Richard, David C S; Chelminski, Iwona; Zimmerman, Mark A

    2010-01-01

    There is little agreement about the latent factor structure of the Diagnostic and Statistical Manual of Mental Disorders (DSM) personality disorders (PDs). Factor analytic studies over the past 2 decades have yielded different results, in part reflecting differences in factor analytic technique, the measure used to assess the PDs, and the changing DSM criteria. In this study, we explore the latent factor structure of the DSM (4th ed.; IV) PDs in a sample of 1200 psychiatric outpatients evaluated with the Structured Interview for DSM-IV PDs (B. Pfohl, N. Blum, & M. Zimmerman, 1997). We first evaluated 2 a priori models of the PDs with confirmatory factor analysis (CFA), reflecting their inherent organization in the DSM-IV: a 3-factor model and a 10-factor model. Fit statistics did not suggest that these models yielded an adequate fit. We then evaluated the latent structure with exploratory factor analysis (EFA). Multiple solutions produced more statistically and theoretically reasonable results, as well as providing clinically useful findings. On the basis of fit statistics and theory, 3 models were evaluated further--the 4-, 5-, and 10-factor models. The 10-factor model, which did not resemble the 10-factor model of the CFA, was determined to be the strongest of all 3 models. Future research should use contemporary methods of evaluating factor analytic results in order to more thoroughly compare various factor solutions.

  8. A Bayesian Multi-Level Factor Analytic Model of Consumer Price Sensitivities across Categories

    Science.gov (United States)

    Duvvuri, Sri Devi; Gruca, Thomas S.

    2010-01-01

    Identifying price sensitive consumers is an important problem in marketing. We develop a Bayesian multi-level factor analytic model of the covariation among household-level price sensitivities across product categories that are substitutes. Based on a multivariate probit model of category incidence, this framework also allows the researcher to…

  9. A Bayesian Multi-Level Factor Analytic Model of Consumer Price Sensitivities across Categories

    Science.gov (United States)

    Duvvuri, Sri Devi; Gruca, Thomas S.

    2010-01-01

    Identifying price sensitive consumers is an important problem in marketing. We develop a Bayesian multi-level factor analytic model of the covariation among household-level price sensitivities across product categories that are substitutes. Based on a multivariate probit model of category incidence, this framework also allows the researcher to…

  10. Analytical Solution for Model-Based Dynamic Power Factor Measurement in AC Resistance Spot Welding

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    On the basis of welding transformer circuit model, a new measuring method was proposed. This method measures the peak angle of the welding current, and then calculates the dynamic power factor in each half-wave.An artificial neural network is trained and used to generate simulation data for the analytical solution, i.e. a highorder binary polynomial, which can be easily adopted to calculate the power factor online. The tailored sensing and computing system ensures that the method possesses a real-time computational capacity and satisfying accuracy. A DSP-based resistance spot welding monitoring system was developed to perform ANN computation. The experimental results suggest that this measuring method is feasible.

  11. Human performance modeling for system of systems analytics: combat performance-shaping factors.

    Energy Technology Data Exchange (ETDEWEB)

    Lawton, Craig R.; Miller, Dwight Peter

    2006-01-01

    The US military has identified Human Performance Modeling (HPM) as a significant requirement and challenge of future systems modeling and analysis initiatives. To support this goal, Sandia National Laboratories (SNL) has undertaken a program of HPM as an integral augmentation to its system-of-system (SoS) analytics capabilities. The previous effort, reported in SAND2005-6569, evaluated the effects of soldier cognitive fatigue on SoS performance. The current effort began with a very broad survey of any performance-shaping factors (PSFs) that also might affect soldiers performance in combat situations. The work included consideration of three different approaches to cognition modeling and how appropriate they would be for application to SoS analytics. This bulk of this report categorizes 47 PSFs into three groups (internal, external, and task-related) and provides brief descriptions of how each affects combat performance, according to the literature. The PSFs were then assembled into a matrix with 22 representative military tasks and assigned one of four levels of estimated negative impact on task performance, based on the literature. Blank versions of the matrix were then sent to two ex-military subject-matter experts to be filled out based on their personal experiences. Data analysis was performed to identify the consensus most influential PSFs. Results indicate that combat-related injury, cognitive fatigue, inadequate training, physical fatigue, thirst, stress, poor perceptual processing, and presence of chemical agents are among the PSFs with the most negative impact on combat performance.

  12. Factor Analysis of People Rather than Variables: Q and Other Two-Mode Factor Analytic Models.

    Science.gov (United States)

    Frederick, Brigitte N.

    Factor analysis attempts to study how different objects group together to form factors with the purposes of: (1) reducing the number of factorable entities (e.g., variables) with which the researcher needs to deal; (2) searching data for qualitative and quantitative differences; and (3) testing hypotheses (R. Gorsuch, 1983). While most factor…

  13. Modelling and assessment of dependent performance shaping factors through Analytic Network Process

    Energy Technology Data Exchange (ETDEWEB)

    De Ambroggi, Massimiliano, E-mail: massimiliano.deambroggi@mail.polimi.i [Politecnico di Milano, Department of Management, Economics and Industrial Engineering, Piazza Leonardo da Vinci 32, Milan 20132 (Italy); Trucco, Paolo [Politecnico di Milano, Department of Management, Economics and Industrial Engineering, Piazza Leonardo da Vinci 32, Milan 20132 (Italy)

    2011-07-15

    Despite continuous progresses in research and applications, one of the major weaknesses of current HRA methods dwells in their limited capability of modelling the mutual influences between performance shaping factors (PSFs). Indeed at least two types of dependencies between PSFs can be defined: (i) dependency between the states of the PSFs; (ii) dependency between the influences (impacts) of the PSFs on the human performance. This paper introduces a method, based on Analytic Network Process (ANP), for the quantification of the latter, where the overall contribution of each PSF (weight) to the human error probability (HEP) is eventually returned. The core of the method is the modelling process, articulated into two steps: firstly, a qualitative network of dependencies between PSFs is identified, then, the importance of each PSF is quantitatively assessed using ANP. The model allows to distinguish two components of the PSF influence: direct influence that is the influence that the considered PSF is able to express by itself, notwithstanding the presence of other PSFs and indirect influence that is the incremental influence of the considered PSF through its influence on other PSFs. A case study in Air Traffic Control is presented where the proposed approach is integrated into the cognitive simulator PROCOS. The results demonstrated a significant modification of the influence of PSFs over the operator performance when dependencies are taken into account, underlining the importance of considering not only the possible correlation between the states of PSFs but also their mutual dependency in affecting human performance in complex systems.

  14. A factor analytic investigation of the Tripartite model of affect in a clinical sample of young Australians

    OpenAIRE

    Cosgrave Elizabeth M; Cotton Sue M; Buckby Joe A; Killackey Eoin J; Yung Alison R

    2008-01-01

    Abstract Background The Mood and Anxiety Symptom Questionnaire (MASQ) was designed to specifically measure the Tripartite model of affect and is proposed to offer a delineation between the core components of anxiety and depression. Factor analytic data from adult clinical samples has shown mixed results; however no studies employing confirmatory factor analysis (CFA) have supported the predicted structure of distinct Depression, Anxiety and General Distress factors. The Tripartite model has n...

  15. Analytic Modeling of Insurgencies

    Science.gov (United States)

    2014-08-01

    In this article, however, we focus on OR analytic modeling based on formal methodologies such as differential equations, utility theory , game theory ...influenced by interests and utilities. 4.1 Carrots and Sticks An analytic model that captures the aforementioned utilitarian aspect is presented in...Pakistan," American Journal of Political Science, vol. 57, no. 1, pp. 30-48, 2013. [25] T. Kuran, "Sparks and Prairie Fire: A Theory of

  16. Factor Analytic Replication and Model Comparison of the BASC-2 Behavioral and Emotional Screening System.

    Science.gov (United States)

    Splett, Joni Williams; Raborn, Anthony; Lane, Kathleen Lynne; Binney, Alexandra J; Chafouleas, Sandra M

    2017-03-06

    We conducted this study to add to literature of previous conflicting factorial examinations of the BASC-2 Behavioral and Emotional Screening System (BESS), Teacher Form-Child/Adolescent. Data were collected by an urban school district in the southeastern United States including 2,228 students rated by 120 teachers in Fall 2014 and 1,955 students rated by 104 teachers in Spring 2015. In both samples, we replicated and then conceptually and statistically compared factor models to examine the (a) 4-factor structure from which the BESS Teacher Form was developed, and (b) existence of a general factor currently being used. Previous studies examined the 4-factor and bifactor structure of the BESS Teacher Form on separate samples. Our model comparison results support a multidimensional interpretation. We recovered similar fit statistics and standardized factor loadings as previous factor analyses. However, measures of variance accounted for by the general factor were below recommended thresholds of a unidimensional construct. We recommend advancing a factorial model that represents a weighted combination of general and specific factors, but do not support continued use of a unidimensional total T score. Limitations and implications of the study are discussed. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  17. An Analytical Delay Model

    Institute of Scientific and Technical Information of China (English)

    MIN Yinghua; LI Zhongcheng

    1999-01-01

    Delay consideration has been a majorissue in design and test of high performance digital circuits. Theassumption of input signal change occurring only when all internal nodesare stable restricts the increase of clock frequency. It is no longertrue for wave pipelining circuits. However, previous logical delaymodels are based on the assumption. In addition, the stable time of arobust delay test generally depends on the longest sensitizable pathdelay. Thus, a new delay model is desirable. This paper explores thenecessity first. Then, Boolean process to analytically describe thelogical and timing behavior of a digital circuit is reviewed. Theconcept of sensitization is redefined precisely in this paper. Based onthe new concept of sensitization, an analytical delay model isintroduced. As a result, many untestable delay faults under thelogical delay model can be tested if the output waveforms can be sampledat more time points. The longest sensitizable path length is computedfor circuit design and delay test.

  18. A factor analytic investigation of the Tripartite model of affect in a clinical sample of young Australians

    Directory of Open Access Journals (Sweden)

    Cosgrave Elizabeth M

    2008-09-01

    Full Text Available Abstract Background The Mood and Anxiety Symptom Questionnaire (MASQ was designed to specifically measure the Tripartite model of affect and is proposed to offer a delineation between the core components of anxiety and depression. Factor analytic data from adult clinical samples has shown mixed results; however no studies employing confirmatory factor analysis (CFA have supported the predicted structure of distinct Depression, Anxiety and General Distress factors. The Tripartite model has not been validated in a clinical sample of older adolescents and young adults. The aim of the present study was to examine the validity of the Tripartite model using scale-level data from the MASQ and correlational and confirmatory factor analysis techniques. Methods 137 young people (M = 17.78, SD = 2.63 referred to a specialist mental health service for adolescents and young adults completed the MASQ and diagnostic interview. Results All MASQ scales were highly inter-correlated, with the lowest correlation between the depression- and anxiety-specific scales (r = .59. This pattern of correlations was observed for all participants rating for an Axis-I disorder but not for participants without a current disorder (r = .18. Confirmatory factor analyses were conducted to evaluate the model fit of a number of solutions. The predicted Tripartite structure was not supported. A 2-factor model demonstrated superior model fit and parsimony compared to 1- or 3-factor models. These broad factors represented Depression and Anxiety and were highly correlated (r = .88. Conclusion The present data lend support to the notion that the Tripartite model does not adequately explain the relationship between anxiety and depression in all clinical populations. Indeed, in the present study this model was found to be inappropriate for a help-seeking community sample of older adolescents and young adults.

  19. Analytic model of ocean color

    Science.gov (United States)

    Sathyendranath, Shubha; Platt, Trevor

    1997-04-01

    Ocean color is determined by spectral variations in reflectance at the sea surface. In the analytic model presented here, reflectance at the sea surface is estimated with the quasi-single-scattering approximation that ignores transspectral processes. The analytic solutions we obtained are valid for a vertically homogeneous water column. The solution provides a theoretical expression for the dimensionless, quasi-stable parameter ( r ), with a value of 0.33, that appears in many models in which reflectance at the sea surface is expressed as a function of absorption coefficient ( a ) and backscattering coefficient ( b b ). In the solution this parameter is represented as a function of the mean cosines for downwelling and upwelling irradiances and as the ratio of the upward-scattering coefficient to the backscattering coefficient. Implementation of the model is discussed for two cases: (1) that in which molecular scattering is the main source of upwelling light, and (2) that in which particle scattering is responsible for all the upwelled light. Computations for the two cases are compared with Monte Carlo simulations, which accounts for processes not considered in the analytic model (multiple scattering, and consequent depth-dependent changes in apparent optical properties). The Monte Carlo models show variations in reflectance with the zenith angle of the incident light. The analytic model can be used to reproduce these variations fairly well for the case of molecular scattering. For the particle-scattering case also, the analytic and Monte Carlo models show similar variations in r with zenith angle. However, the analytic model (as implemented here) appears to underestimate r when the value of the backscattering coefficient b b increases relative to the absorption coefficient a . The errors also vary with the zenith angle of the incident light field, with the maximum underestimate being approximately 0.06 (equivalent to relative errors from 12 to 17 ) for the range of

  20. Critical Factors in Data Governance for Learning Analytics

    Science.gov (United States)

    Elouazizi, Noureddine

    2014-01-01

    This paper identifies some of the main challenges of data governance modelling in the context of learning analytics for higher education institutions, and discusses the critical factors for designing data governance models for learning analytics. It identifies three fundamental common challenges that cut across any learning analytics data…

  1. Critical Factors In Data Governance For Learning Analytics

    OpenAIRE

    Elouazizi, Noureddine

    2014-01-01

     This paper identifies some of the main challenges of data governance modeling in the context of learning analytics for higher education institutions, and discusses the critical factors for designing data governance models for learning analytics. It identifies three fundamental common challenges that cut across any learning analytics data governance model, viz., the ownership of the learning analytics data sets, its interpretation and the enacting of decision-making on the basis of this learn...

  2. A Note on Sample Size and Solution Propriety for Confirmatory Factor Analytic Models

    Science.gov (United States)

    Jackson, Dennis L.; Voth, Jennifer; Frey, Marc P.

    2013-01-01

    Determining an appropriate sample size for use in latent variable modeling techniques has presented ongoing challenges to researchers. In particular, small sample sizes are known to present concerns over sampling error for the variances and covariances on which model estimation is based, as well as for fit indexes and convergence failures. The…

  3. Analytic standard errors for exploratory process factor analysis.

    Science.gov (United States)

    Zhang, Guangjian; Browne, Michael W; Ong, Anthony D; Chow, Sy Miin

    2014-07-01

    Exploratory process factor analysis (EPFA) is a data-driven latent variable model for multivariate time series. This article presents analytic standard errors for EPFA. Unlike standard errors for exploratory factor analysis with independent data, the analytic standard errors for EPFA take into account the time dependency in time series data. In addition, factor rotation is treated as the imposition of equality constraints on model parameters. Properties of the analytic standard errors are demonstrated using empirical and simulated data.

  4. What counts in preschool number knowledge? A Bayes factor analytic approach toward theoretical model development.

    Science.gov (United States)

    Mou, Yi; Berteletti, Ilaria; Hyde, Daniel C

    2017-09-06

    Preschool children vary tremendously in their numerical knowledge, and these individual differences strongly predict later mathematics achievement. To better understand the sources of these individual differences, we measured a variety of cognitive and linguistic abilities motivated by previous literature to be important and then analyzed which combination of these variables best explained individual differences in actual number knowledge. Through various data-driven Bayesian model comparison and selection strategies on competing multiple regression models, our analyses identified five variables of unique importance to explaining individual differences in preschool children's symbolic number knowledge: knowledge of the count list, nonverbal approximate numerical ability, working memory, executive conflict processing, and knowledge of letters and words. Furthermore, our analyses revealed that knowledge of the count list, likely a proxy for explicit practice or experience with numbers, and nonverbal approximate numerical ability were much more important to explaining individual differences in number knowledge than general cognitive and language abilities. These findings suggest that children use a diverse set of number-specific, general cognitive, and language abilities to learn about symbolic numbers, but the contribution of number-specific abilities may overshadow that of more general cognitive abilities in the learning process. Copyright © 2017 Elsevier Inc. All rights reserved.

  5. Analytical evaluation of atomic form factors: application to Rayleigh scattering

    CERN Document Server

    Safari, L; Amaro, P; Jänkälä, K; Fratini, F

    2014-01-01

    Atomic form factors are widely used for the characterization of targets and specimens, from crystallography to biology. By using recent mathematical results, here we derive an analytical expression for the atomic form factor within the independent particle model constructed from nonrelativistic screened hydrogenic wavefunctions. The range of validity of this analytical expression is checked by comparing the analytically obtained form factors with the ones obtained within the Hartee-Fock method. As an example, we apply our analytical expression for the atomic form factor to evaluate the differential cross section for Rayleigh scattering off neutral atoms.

  6. Critical Success Factors of Customers Experience in Iranian Banks and their Ranking by Using Analytic Hierarchy Process Model

    Directory of Open Access Journals (Sweden)

    Fariddeddin Allameh Haery

    2013-09-01

    Full Text Available Nowadays, the importance of experiences is uncovered to any businesses especially in service offering segments. Businesses can insure success by creating optimized experiences for their customer. This article seeks to enrich the understanding of critical success factors of customer experience by providing an overview of existing CFS literature and suggesting and prioritizing the specific elements of critical success factors of customer experience in order to improve bank’s services. For this purpose we conduct a survey by participation of 384 bank’s customers. Analytic hierarchical process has been applied in order to determine and prioritize the critical success factors. Results suggest that from the viewpoint of customers, behavioral aspect possesses the highest priority among all the other factors and cognitive element has the second priority. Also sub-criteria comparison result indicate that sub-factors of employee, service process, speed, physical evidence, marketing mix and convenience are ranked first to sixth between other sub-factors. In addition by calculating inconsistency rate of pair-wise comparison, consistency of these factors is also acceptable.

  7. Analytic factorization of Lie group representations

    DEFF Research Database (Denmark)

    Gimperlein, Heiko; Krötz, Bernhard; Lienau, Christoph

    2012-01-01

    For every moderate growth representation (p,E)(p,E) of a real Lie group G on a Fréchet space, we prove a factorization theorem of Dixmier–Malliavin type for the space of analytic vectors E¿E¿. There exists a natural algebra of superexponentially decreasing analytic functions A(G)A(G), such that E......¿=¿(A(G))E¿E¿=¿(A(G))E¿. As a corollary we obtain that E¿E¿ coincides with the space of analytic vectors for the Laplace–Beltrami operator on G.......For every moderate growth representation (p,E)(p,E) of a real Lie group G on a Fréchet space, we prove a factorization theorem of Dixmier–Malliavin type for the space of analytic vectors E¿E¿. There exists a natural algebra of superexponentially decreasing analytic functions A(G)A(G), such that E...

  8. A Factor Analytic Model of Economic Growth Basing on Domestic and Foreign Resource and a Positive Study of Korean Economy

    Institute of Scientific and Technical Information of China (English)

    伍青生; 蔡来兴; 李湛

    2001-01-01

    The most popular and traditional method to analyze the source of economic growth is created by Robert. M.Solow, but it has some localizations and is not very precise in some sense. In this paper, we will classify all sources of economic growth into domestic part and foreign part. Gross domestic products (GDP) growth is decomposed into labor input, domestic capital formation, imported foreign capital formation, and total factor productivity (TFP) growth. TFP growth is again divided into scale economies, capital utilization, human capital, domestic research and development (R&D)effort, and imported foreign technology. In this way,foreign resources include imported foreign capital formation and foreign technology. By model and demonstration, we analyze the impact of foreign resource to an economy, and the contribution of each factor (especially technological progress) to economic growth.

  9. A Factor Analytic Model of Drug-Related Behavior in Adolescence and Its Impact on Arrests at Multiple Stages of the Life Course.

    Science.gov (United States)

    Phillips, Matthew D

    2017-03-01

    Recognizing the inherent variability of drug-related behaviors, this study develops an empirically-driven and holistic model of drug-related behavior during adolescence using factor analysis to simultaneously model multiple drug behaviors. The factor analytic model uncovers latent dimensions of drug-related behaviors, rather than patterns of individuals. These latent dimensions are treated as empirical typologies which are then used to predict an individual's number of arrests accrued at multiple phases of the life course. The data are robust enough to simultaneously capture drug behavior measures typically considered in isolation in the literature, and to allow for behavior to change and evolve over the period of adolescence. Results show that factor analysis is capable of developing highly descriptive patterns of drug offending, and that these patterns have great utility in predicting arrests. Results further demonstrate that while drug behavior patterns are predictive of arrests at the end of adolescence for both males and females, the impacts on arrests are longer lasting for females. The various facets of drug behaviors have been a long-time concern of criminological research. However, the ability to model multiple behaviors simultaneously is often constrained by data that do not measure the constructs fully. Factor analysis is shown to be a useful technique for modeling adolescent drug involvement patterns in a way that accounts for the multitude and variability of possible behaviors, and in predicting future negative life outcomes, such as arrests.

  10. A meta-analytic review of the relationships between the five-factor model and DSM-IV-TR personality disorders: a facet level analysis.

    Science.gov (United States)

    Samuel, Douglas B; Widiger, Thomas A

    2008-12-01

    Theory and research have suggested that the personality disorders contained within the American Psychiatric Association's Diagnostic and Statistical Manual of Mental Disorders (DSM-IV-TR) can be understood as maladaptive variants of the personality traits included within the five-factor model (FFM). The current meta-analysis of FFM personality disorder research both replicated and extended the 2004 work of Saulsman and Page (The five-factor model and personality disorder empirical literature: A meta-analytic review. Clinical Psychology Review, 23, 1055-1085) through a facet level analysis that provides a more specific and nuanced description of each DSM-IV-TR personality disorder. The empirical FFM profiles generated for each personality disorder were generally congruent at the facet level with hypothesized FFM translations of the DSM-IV-TR personality disorders. However, notable exceptions to the hypotheses did occur and even some findings that were consistent with FFM theory could be said to be instrument specific.

  11. Study of factors affecting the productivity of nurses based on the ACHIEVE model and prioritizing them using analytic hierarchy process technique, 2012

    Directory of Open Access Journals (Sweden)

    Payam Farhadi

    2013-01-01

    Full Text Available Objective: Improving productivity is one of the most important strategies for social-economic development. Human resources are known as the most important resources in the organizations′ survival and success. Aims: To determine the factors affecting the human resource productivity using the ACHIEVEa model from the nurses′ perspective and then prioritize them from the perspective of head nurses using Analytic Hierarchy Process (AHP technique. Settings and Design: Iran, Shiraz University of Medical Sciences teaching hospitals in 2012. Materials and Methods: This was an applied, cross-sectional and analytical-descriptive study conducted in two phases. In the first phase, to determine the factors affecting the human resource productivity from nurses′ perspective, 110 nurses were selected using a two-stage cluster sampling method. Required data were collected using the Persian version of Hersey and Goldsmith′s Human Resource Productivity Questionnaire. In the second phase, in order to prioritize the factors affecting human resource productivity based on the ACHIEVE model using AHP technique, pairwise comparisons matrices were given to the 19 randomly selected head nurses to express their opinions about those factors relative priorities or importance. Statistical Analysis Used: Collected data and matrices in two mentioned phases were analyzed using SPSS 15.0 and some statistical tests including Independent-Samples T-Test and Pearson Correlation coefficient, as well as, Super Decisions software (Latest Beta. Results: The human resource productivity had significant relationships with nurses′ sex (P = 0.008, marital status (P < 0.001, education level (P < 0.001, and all questionnaire factors (P < 0.05. Nurses′ productivity from their perspective was below average (44.97 ΁ 7.43. Also, the priorities of factors affecting the productivity of nurses based on the ACHIEVE model from the head nurses′ perspective using AHP technique, from the

  12. Understanding organizational commitment: A meta-analytic examination of the roles of the five-factor model of personality and culture.

    Science.gov (United States)

    Choi, Daejeong; Oh, In-Sue; Colbert, Amy E

    2015-09-01

    We examined the relationships between the Five-Factor Model (FFM) of personality traits and three forms of organizational commitment (affective, normative, and continuance commitment) and their variability across individualistic and collectivistic cultures. Meta-analytic results based on 55 independent samples from 50 studies (N = 18,262) revealed that (a) all FFM traits had positive relationships with affective commitment; (b) all FFM traits had positive relationships with normative commitment; and (c) Emotional Stability, Extraversion, and Openness to Experience had negative relationships with continuance commitment. In particular, Agreeableness was found to be the trait most strongly related to both affective and normative commitment. The results also showed that Agreeableness had stronger relationships with affective and normative commitment in collectivistic cultures than in individualistic cultures. We provide theoretical and practical implications of these findings for personality, job attitudes, and employee selection and retention.

  13. Small-angle scattering from phospholipid nanodiscs: derivation and refinement of a molecular constrained analytical model form factor.

    Science.gov (United States)

    Skar-Gislinge, Nicholas; Arleth, Lise

    2011-02-28

    Nanodiscs™ consist of small phospholipid bilayer discs surrounded and stabilized by amphiphilic protein belts. Nanodiscs and their confinement and stabilization of nanometer sized pieces of phospholipid bilayer are highly interesting from a membrane physics point of view. We demonstrate how the detailed structure of Di-Lauroyl-Phosphatidyl Choline (DLPC) nanodiscs may be determined by simultaneous fitting of a structural model to small-angle scattering data from the nanodiscs as investigated in three different contrast situations, respectively two SANS contrasts and one SAXS contrast. The article gives a detailed account of the underlying structural model for the nanodiscs and describe how additional chemical and biophysical information can be incorporated in the model in terms of molecular constraints. We discuss and quantify the contribution from the different elements of the structural model and provide very strong experimental support for the nanodiscs as having an elliptical cross-section and with poly-histidine tags protruding out from the rim of the protein belt. The analysis also provides unprecedented information about the structural conformation of the phospholipids when these are localized in the nanodiscs. The model paves the first part of the way in order to reach our long term goal of using the nanodiscs as a platform for small-angle scattering based structural investigations of membrane proteins in solution.

  14. The Computer-Aided Analytic Process Model. Operations Handbook for the Analytic Process Model Demonstration Package

    Science.gov (United States)

    1986-01-01

    Research Note 86-06 THE COMPUTER-AIDED ANALYTIC PROCESS MODEL : OPERATIONS HANDBOOK FOR THE ANALYTIC PROCESS MODEL DE ONSTRATION PACKAGE Ronald G...ic Process Model ; Operations Handbook; Tutorial; Apple; Systems Taxonomy Mod--l; Training System; Bradl1ey infantry Fighting * Vehicle; BIFV...8217. . . . . . . .. . . . . . . . . . . . . . . . * - ~ . - - * m- .. . . . . . . item 20. Abstract -continued companion volume-- "The Analytic Process Model for

  15. ANALYTICAL ELEMENT MODELING OF COASTAL AQUIFERS

    Science.gov (United States)

    Four topics were studied concerning the modeling of groundwater flow in coastal aquifers with analytic elements: (1) practical experience was obtained by constructing a groundwater model of the shallow aquifers below the Delmarva Peninsula USA using the commercial program MVAEM; ...

  16. ANALYTICAL ELEMENT MODELING OF COASTAL AQUIFERS

    Science.gov (United States)

    Four topics were studied concerning the modeling of groundwater flow in coastal aquifers with analytic elements: (1) practical experience was obtained by constructing a groundwater model of the shallow aquifers below the Delmarva Peninsula USA using the commercial program MVAEM; ...

  17. Folded-back solution structure of monomeric factor H of human complement by synchrotron X-ray and neutron scattering, analytical ultracentrifugation and constrained molecular modelling.

    Science.gov (United States)

    Aslam, M; Perkins, S J

    2001-06-22

    Factor H (FH) is a regulatory cofactor for the protease factor I in the breakdown of C3b in the complement system of immune defence, and binds to heparin and other polyanionic substrates. FH is composed of 20 short consensus/complement repeat (SCR) domains, for which the overall arrangement in solution is unknown. As previous studies had shown that FH can form monomeric or dimeric structures, X-ray and neutron scattering was accordingly performed with FH in the concentration range between 0.7 and 14 mg ml(-1). The radius of gyration of FH was determined to be 11.1-11.3 nm by both methods, and the radii of gyration of the cross-section were 4.4 nm and 1.7 nm. The distance distribution function P(r) showed that the overall length of FH was 38 nm. The neutron data showed that FH was monomeric with a molecular mass of 165,000(+/-17,000) Da. Analytical ultracentrifugation data confirmed this, where sedimentation equilibrium curve fits gave a mean molecular mass of 155,000(+/-3,000) Da. Sedimentation velocity experiments using the g*(s) derivative method showed that FH was monodisperse and had a sedimentation coefficient of 5.3(+/-0.1) S. In order to construct a full model of FH for scattering curve and sedimentation coefficient fits, homology models were constructed for 17 of the 20 SCR domains using knowledge of the NMR structures for FH SCR-5, SCR-15 and SCR-16, and vaccinia coat protein SCR-3 and SCR-4. Molecular dynamics simulations were used to generate a large conformational library for each of the 19 SCR-SCR linker peptides. Peptides from these libraries were combined with the 20 SCR structures in order to generate stereochemically complete models for the FH structure. Using an automated constrained fit procedure, the analysis of 16,752 possible FH models showed that only those models in which the 20 SCR domains were bent back upon themselves were able to account for the scattering and sedimentation data. The best-fit models showed that FH had an overall length

  18. Analytical modelling of soccer heading

    Indian Academy of Sciences (India)

    Zahari Taha; Mohd Hasnun Arif Hassan; Iskandar Hasanuddin

    2015-08-01

    Heading occur frequently in soccer games and studies have shown that repetitive heading of the soccer ball could result in degeneration of brain cells and lead to mild traumatic brain injury. This study proposes a two degree-of-freedom linear mathematical model to study the impact of the soccer ball on the brain. The model consists of a mass–spring–damper system, in which the skull, the brain and the soccer ball are modelled as a mass and the neck modelled as a spring–damper system. The proposed model was compared with previous dynamic model for soccer ball-to-head impact. Moreover, it was also validated against drop ball experiment on an instrumented dummy skull and also compared with head acceleration data from previous studies. Comparison shows that our proposed model is capable of describing both the skull and brain accelerations qualitatively and quantitatively. This study shows that a simple linear mathematical model can be useful in giving a preliminary insight on the kinematics of human skull and brain during a ball-to-head impact. The model can be used to investigate the important parameters during soccer heading that affect the brain displacement and acceleration, thus providing better understanding of the mechanics behind it.

  19. Analytical ice-sheet models

    NARCIS (Netherlands)

    Oerlemans, J.

    2005-01-01

    To model present-day or palaeo-ice sheets in a realistic way requires numerical methods with high spatial resolution and a comprehensive description of the relevant physical processes. Nevertheless, some basic elements of the interaction between ice sheets and climate can be investigated by simple m

  20. Methods for estimating uncertainty in factor analytic solutions

    Directory of Open Access Journals (Sweden)

    P. Paatero

    2013-08-01

    Full Text Available EPA PMF version 5.0 and the underlying multilinear engine executable ME-2 contain three methods for estimating uncertainty in factor analytic models: classical bootstrap (BS, displacement of factor elements (DISP, and bootstrap enhanced by displacement of factor elements (BS-DISP. The goal of these methods is to capture the uncertainty of PMF analyses due to random errors and rotational ambiguity. It is shown that the three methods complement each other: depending on characteristics of the data set, one method may provide better results than the other two. Results are presented using synthetic data sets, including interpretation of diagnostics, and recommendations are given for parameters to report when documenting uncertainty estimates from EPA PMF or ME-2 applications.

  1. Semi-analytic modelling of subsidence

    NARCIS (Netherlands)

    Fokker, P.A.; Orlic, B.

    2006-01-01

    This paper presents a forward model for subsidence prediction caused by extraction of hydrocarbons. The model uses combinations of analytic solutions to the visco-elastic equations, which approximate the boundary conditions. There are only a few unknown parameters to be estimated, and, consequently,

  2. An improved model of Robinson equivalent circuit analytical model

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    The Robinson equivalent circuit analytical model can be used only in calculating shielding effectiveness of enclosure with the same multi-holes in one wall, but cannot be used in different multi-holes in two walls. According to the practical requirement, this article uses Konefal’s and Farhana’s characteristic impedance of apertures to improve the equivalent circuit analytical model in different multi-holes in two walls. The improved equivalent circuit analytical model is more useful than Robinson equivalent circuit analytical model. In the article, all kinds of enclosures are simulated by TLM (Transmission-Line Matrix method) to prove that this improved model is feasible in multimode.

  3. Analytical modelling of temperature effects on synapses

    CERN Document Server

    Kufel, Dominik S

    2016-01-01

    It was previously reported, that temperature may significantly influence neural dynamics on different levels of brain modelling. Due to this fact, while creating the model in computational neuroscience we would like to make it scalable for wide-range of various brain temperatures. However currently, because of a lack of experimental data and an absence of analytical model describing temperature influence on synapses, it is not possible to include temperature effects on multi-neuron modelling level. In this paper, we propose first step to deal with this problem: new analytical model of AMPA-type synaptic conductance, which is able to include temperature effects in low-frequency stimulations. It was constructed on basis of Markov model description of AMPA receptor kinetics and few simplifications motivated both experimentally and from Monte Carlo simulation of synaptic transmission. The model may be used for efficient and accurate implementation of temperature effects on AMPA receptor conductance in large scale...

  4. Analytical Investigation on the Power Factor of a Flux-Modulated Permanent-Magnet Synchronous Machine

    DEFF Research Database (Denmark)

    Zhang, Xiaoxu; Liu, Xiao; Liu, Jinglin;

    2015-01-01

    Flux-modulated permanent-magnet synchronous machine (FM-PMSM) is characterized as a high-torque direct-drive electrical machine, but may suffer from the low power factor. This paper aims to investigate the issue of the low power factor in theory and explore the possibilities for improvement....... An analytical model for the FM-PMSM is developed to obtain the magnetic field distribution, and its accuracy is verified by the finite-element method. On the basis of the developed analytical model, a fast approach is developed to predict the power factor of the FM-PMSM. The analytical results indicate...

  5. Analytical model for Stirling cycle machine design

    Energy Technology Data Exchange (ETDEWEB)

    Formosa, F. [Laboratoire SYMME, Universite de Savoie, BP 80439, 74944 Annecy le Vieux Cedex (France); Despesse, G. [Laboratoire Capteurs Actionneurs et Recuperation d' Energie, CEA-LETI-MINATEC, Grenoble (France)

    2010-10-15

    In order to study further the promising free piston Stirling engine architecture, there is a need of an analytical thermodynamic model which could be used in a dynamical analysis for preliminary design. To aim at more realistic values, the models have to take into account the heat losses and irreversibilities on the engine. An analytical model which encompasses the critical flaws of the regenerator and furthermore the heat exchangers effectivenesses has been developed. This model has been validated using the whole range of the experimental data available from the General Motor GPU-3 Stirling engine prototype. The effects of the technological and operating parameters on Stirling engine performance have been investigated. In addition to the regenerator influence, the effect of the cooler effectiveness is underlined. (author)

  6. Analytical model for Stirling cycle machine design

    CERN Document Server

    Formosa, Fabien; 10.1016/j.enconman.2010.02.010

    2013-01-01

    In order to study further the promising free piston Stirling engine architecture, there is a need of an analytical thermodynamic model which could be used in a dynamical analysis for preliminary design. To aim at more realistic values, the models have to take into account the heat losses and irreversibilities on the engine. An analytical model which encompasses the critical flaws of the regenerator and furthermore the heat exchangers effectivenesses has been developed. This model has been validated using the whole range of the experimental data available from the General Motor GPU-3 Stirling engine prototype. The effects of the technological and operating parameters on Stirling engine performance have been investigated. In addition to the regenerator influence, the effect of the cooler effectiveness is underlined.

  7. An analytical high value target acquisition model

    OpenAIRE

    Becker, Kevin J.

    1986-01-01

    Approved for public release; distribution is unlimited An Analytical High Value Target (HVT) acquisition model is developed for a generic anti-ship cruise missile system. the target set is represented as a single HVT within a field of escorts. The HVT's location is described by a bivariate normal probability distribution. the escorts are represented by a spatially homogeneous Poisson random field surrounding the HVT. Model output consists of the probability that at least one missile of...

  8. An analytical model of prominence mass motion

    CERN Document Server

    Routh, Swati; Bhat, Atul

    2016-01-01

    Solar Prominences are intriguing, but poorly understood magnetic structures of the solar corona. Convective motions in the photosphere and sub-photosphere may be responsible for generating the magnetic fields that support long-lived quiescent solar prominence. The dynamics of solar prominence has been the subject of a large number of studies. We develop a theoretical model using analytical approximations to analyze the nature of the dynamics of these quiescent solar prominences based on the K-S model.

  9. An analytical model for resistivity tools

    Energy Technology Data Exchange (ETDEWEB)

    Hovgaard, J.

    1991-04-01

    An analytical model for resistivity tools is developed. It takes into account the effect of the borehole and the actual shape of the electrodes. The model is two-dimensional, i.e. the model does not deal with eccentricity. The electrical potential around a current source satisfies Poisson`s equation. The method used here to solve Poisson`s equation is the expansion fo the potential function in terms of a complete set of functions involving one of the coordinates with coefficients which are undetermined functions of the other coordinate. Numerical examples of the use of the model are presented. The results are compared with results given in the literature. (au).

  10. The pion form factor from analyticity and unitarity

    Indian Academy of Sciences (India)

    B Ananthanarayan; Irinel Caprini; I Sentitemsu Imsong

    2012-11-01

    Analyticity and unitarity techniques are employed to estimate Taylor coefficients of the pion electromagnetic form factor at = 0 by exploiting the recently evaluated two-pion contribution to the muon ( − 2) and the phase of the pion electromagnetic form factor in the elastic region, known from scattering by Fermi–Watson theorem and the values of the form factor at several points in the space-like region. Regions in the complex -plane are isolated where the form factor cannot have zeros.

  11. Application of an analytical phase transformation model

    Institute of Scientific and Technical Information of China (English)

    LIU Feng; WANG Hai-feng; YANG Chang-lin; CHEN Zheng; YANG Wei; YANG Gen-cang

    2006-01-01

    Employing isothermal and isochronal differential scanning calorimetry, an analytical phase transformation model was used to study the kinetics of crystallization of amorphous Mg82.3Cu17.7 and Pd40Cu30P20Ni10 alloys. The analytical model comprised different combinations of various nucleation and growth mechanisms for a single transformation. Applying different combinations of nucleation and growth mechanisms, the nucleation and growth modes and the corresponding kinetic and thermodynamic parameters, have been determined. The influence of isothermal pre-annealing on subsequent isochronal crystallization kinetics with the increase of pre-annealing can be analyzed. The results show that the changes of the growth exponent, n, and the effective overall activation energy Q, occurring as function of the degree of transformation, do not necessarily imply a change of nucleation and growth mechanisms, i.e. such changes can occur while the transformation is isokinetic.

  12. An analytical model of memristors in plants.

    Science.gov (United States)

    Markin, Vladislav S; Volkov, Alexander G; Chua, Leon

    2014-01-01

    The memristor, a resistor with memory, was postulated by Chua in 1971 and the first solid-state memristor was built in 2008. Recently, we found memristors in vivo in plants. Here we propose a simple analytical model of 2 types of memristors that can be found within plants. The electrostimulation of plants by bipolar periodic waves induces electrical responses in the Aloe vera and Mimosa pudica with fingerprints of memristors. Memristive properties of the Aloe vera and Mimosa pudica are linked to the properties of voltage gated K(+) ion channels. The potassium channel blocker TEACl transform plant memristors to conventional resistors. The analytical model of a memristor with a capacitor connected in parallel exhibits different characteristic behavior at low and high frequency of applied voltage, which is the same as experimental data obtained by cyclic voltammetry in vivo.

  13. The Role of the Five Factor Model of Personality in the Perceptions of Negative and Positive Forms of Work-Nonwork Spillover: A Meta-Analytic Review

    Science.gov (United States)

    Michel, Jesse S.; Clark, Malissa A.; Jaramillo, David

    2011-01-01

    The present meta-analysis examines the relationships between the Five Factor Model (FFM) of personality and negative and positive forms of work-nonwork spillover (e.g., work-family conflict and facilitation). Results, based on aggregated correlations drawn from 66 studies and 72 independent samples (Total N = 28,127), reveal that the FFM is…

  14. Analytic Modeling of Severe Vortical Storms.

    Science.gov (United States)

    1980-07-08

    AD---AO86 919 TR DEFENSE AND SPACE SYSTEMS GROUP REDONDO BEACH CA -ETC F/6 4/2 ANALYTIC MODELING OF SEVERE VORTICAL, STDRMS.CW),7JUL G0 F FENDELL ...and Space Systems Group One Space 1ark ___Redondo Beach, California 90278 Francis E. Fendell , Principal Investigator for Artic and Earth Sciences... Fendell , principal investigator, and Phillip Feldman, numerical analyst, of TRW Defense and Space Systems Group, and George Carrier of Harvard University

  15. Transonic Cascade Measurements to Support Analytical Modeling

    Science.gov (United States)

    2007-11-02

    RECEIVED JUL 0 12005 FINAL REPORT FOR: AFOSR GRANT F49260-02-1-0284 TRANSONIC CASCADE MEASUREMENTS TO SUPPORT ANALYTICAL MODELING Paul A. Durbin ...PAD); 650-723-1971 (JKE) durbin @vk.stanford.edu; eaton@vk.stanford.edu submitted to: Attn: Dr. John Schmisseur Air Force Office of Scientific Research...both spline and control points for subsequent wall shape definitions. An algebraic grid generator was used to generate the grid for the blade-wall

  16. Organizational Models for Big Data and Analytics

    Directory of Open Access Journals (Sweden)

    Robert L. Grossman

    2014-04-01

    Full Text Available In this article, we introduce a framework for determining how analytics capability should be distributed within an organization. Our framework stresses the importance of building a critical mass of analytics staff, centralizing or decentralizing the analytics staff to support business processes, and establishing an analytics governance structure to ensure that analytics processes are supported by the organization as a whole.

  17. Organizational Models for Big Data and Analytics

    OpenAIRE

    Grossman, Robert L.; Kevin P. Siegel

    2014-01-01

    In this article, we introduce a framework for determining how analytics capability should be distributed within an organization. Our framework stresses the importance of building a critical mass of analytics staff, centralizing or decentralizing the analytics staff to support business processes, and establishing an analytics governance structure to ensure that analytics processes are supported by the organization as a whole.

  18. Analytical halo model of galactic conformity

    Science.gov (United States)

    Pahwa, Isha; Paranjape, Aseem

    2017-09-01

    We present a fully analytical halo model of colour-dependent clustering that incorporates the effects of galactic conformity in a halo occupation distribution framework. The model, based on our previous numerical work, describes conformity through a correlation between the colour of a galaxy and the concentration of its parent halo, leading to a correlation between central and satellite galaxy colours at fixed halo mass. The strength of the correlation is set by a tunable 'group quenching efficiency', and the model can separately describe group-level correlations between galaxy colour (1-halo conformity) and large-scale correlations induced by assembly bias (2-halo conformity). We validate our analytical results using clustering measurements in mock galaxy catalogues, finding that the model is accurate at the 10-20 per cent level for a wide range of luminosities and length-scales. We apply the formalism to interpret the colour-dependent clustering of galaxies in the Sloan Digital Sky Survey (SDSS). We find good overall agreement between the data and a model that has 1-halo conformity at a level consistent with previous results based on an SDSS group catalogue, although the clustering data require satellites to be redder than suggested by the group catalogue. Within our modelling uncertainties, however, we do not find strong evidence of 2-halo conformity driven by assembly bias in SDSS clustering.

  19. Analytical performance modeling for computer systems

    CERN Document Server

    Tay, Y C

    2013-01-01

    This book is an introduction to analytical performance modeling for computer systems, i.e., writing equations to describe their performance behavior. It is accessible to readers who have taken college-level courses in calculus and probability, networking and operating systems. This is not a training manual for becoming an expert performance analyst. Rather, the objective is to help the reader construct simple models for analyzing and understanding the systems that they are interested in.Describing a complicated system abstractly with mathematical equations requires a careful choice of assumpti

  20. Analytic amplitude models for forward scattering

    CERN Document Server

    Kang, K; Ezhela, Vladimir V; Gauron, P; Kuyanov, Yu V; Lugovsky, S B; Nicolescu, Basarab; Tkachenko, N P; Kuyanov, Yu. V.

    2002-01-01

    We report on fits of a large class of analytic amplitude models for forward scattering against the comprehensive data for all available reactions. To differentiate the goodness of the fits of many possible parametrizations to a large sample of data, we developed and used a set of quantitative indicators measuring statistical quality of the fits over and beyond the typical criterion of the $\\Chi^2 /dof$. These indicators favor models with a universal $ log^2 s$ Pomeron term, which enables one to extend the fit down to $\\sqrt s = 4$ GeV.

  1. Analytical solutions for the Rabi model

    CERN Document Server

    Yu, Lixian; Liang, Qifeng; Chen, Gang; Jia, Suotang

    2012-01-01

    The Rabi model that describes the fundamental interaction between a two-level system with a quantized harmonic oscillator is one of the simplest and most ubiquitous models in modern physics. However, this model has not been solved exactly because it is hard to find a second conserved quantity besides the energy. Here we present a unitary transformation to map this unsolvable Rabi model into a solvable Jaynes-Cummings-like model by choosing a proper variation parameter. As a result, the analytical energy spectrums and wavefunctions including both the ground and the excited states can be obtained easily. Moreover, these explicit results agree well with the direct numerical simulations in a wide range of the experimental parameters. In addition, based on our obtained energy spectrums, the recent experimental observation of Bloch-Siegert in the circuit quantum electrodynamics with the ultrastrong coupling can be explained perfectly. Our results have the potential application in the solid-state quantum information...

  2. Analytic Models of Plausible Gravitational Lens Potentials

    Energy Technology Data Exchange (ETDEWEB)

    Baltz, Edward A.; Marshall, Phil; Oguri, Masamune

    2007-05-04

    Gravitational lenses on galaxy scales are plausibly modeled as having ellipsoidal symmetry and a universal dark matter density profile, with a Sersic profile to describe the distribution of baryonic matter. Predicting all lensing effects requires knowledge of the total lens potential: in this work we give analytic forms for that of the above hybrid model. Emphasizing that complex lens potentials can be constructed from simpler components in linear combination, we provide a recipe for attaining elliptical symmetry in either projected mass or lens potential.We also provide analytic formulae for the lens potentials of Sersic profiles for integer and half-integer index. We then present formulae describing the gravitational lensing effects due to smoothly-truncated universal density profiles in cold dark matter model. For our isolated haloes the density profile falls off as radius to the minus fifth or seventh power beyond the tidal radius, functional forms that allow all orders of lens potential derivatives to be calculated analytically, while ensuring a non-divergent total mass. We show how the observables predicted by this profile differ from that of the original infinite-mass NFW profile. Expressions for the gravitational flexion are highlighted. We show how decreasing the tidal radius allows stripped haloes to be modeled, providing a framework for a fuller investigation of dark matter substructure in galaxies and clusters. Finally we remark on the need for finite mass halo profiles when doing cosmological ray-tracing simulations, and the need for readily-calculable higher order derivatives of the lens potential when studying catastrophes in strong lenses.

  3. Properties of analytic transit light curve models

    CERN Document Server

    Pál, András

    2008-01-01

    In this paper a set of analytic formulae are presented with which the partial derivatives of the flux obscuration function can be evaluated -- for planetary transits and eclipsing binaries -- under the assumption of quadratic limb darkening. The knowledge of these partial derivatives are crucial for many of the data modeling algorithms and estimates of the light curve variations directly from the changes in the orbital elements. These derivatives can also be utilized to speed up some of the fitting methods. A gain of 10 in computing time can be achieved in the implementation of the Levenberg-Marquardt algorithm, relative to using numerical derivatives.

  4. Analytical modeling of orthogonal spiral structures

    Science.gov (United States)

    Santos, Auteliano A.; Hobeck, Jared D.; Inman, Daniel J.

    2016-11-01

    This paper presents the analytical modeling of orthogonal spiral structures (OSS), a promising option for small-scale energy harvesting applications. This unique multi-beam structure is analyzed using a distributed parameter approach with Euler-Bernoulli assumptions. First, an aluminum substrate is evaluated to determine if the proposed design can be used to capture vibration energy in the desired frequency range using a twelve beam OSS. Finite element calculations are used to validate the analytical model. This model is then modified to include the electromechanical effects of a piezoelectric layer added to the aluminum substrate. Lastly, the effects of the beam width and the number of beams is analyzed for a particular surface area of the OSS. Results show that increasing the number of beams causes a reduction in the first natural frequency. From those results, it is possible to conclude that OSS can be used as an alternative to current energy harvesting systems for MEMS applications, allowing the capture of environmental energy in the frequency range of common mechanical systems.

  5. Women's Career Success: A Factor Analytic Study of Contributing Factors.

    Science.gov (United States)

    Gaskill, LuAnn Ricketts

    1991-01-01

    A survey of 466 women employed in retailing received 205 responses identifying (1) factors influencing the success and advancement of women in retailing and (2) how those factors differ for women in upper versus middle positions. Upper-level executives placed more importance on ambition and abilities; midlevel executives credited opportunity and…

  6. An analytical model of iceberg drift

    CERN Document Server

    Wagner, Till J W; Eisenman, Ian

    2016-01-01

    Iceberg drift and decay and the associated freshwater release are increasingly seen as important processes in Earth's climate system, yet a detailed understanding of their dynamics has remained elusive. Here, an idealized model of iceberg drift is presented. The model is designed to include the most salient physical processes that determine iceberg motion while remaining sufficiently simple to facilitate physical insight into iceberg drift dynamics. We derive an analytical solution of the model, which helps build understanding and also enables the rapid computation of large numbers of iceberg trajectories. The long-standing empirical rule of thumb that icebergs drift at 2% of the wind velocity, relative to the ocean current, is derived here from physical first principles, and it is shown that this relation only holds in the limit of strong winds or small icebergs, which approximately applies for typical icebergs in the Arctic. It is demonstrated that the opposite limit of weak winds or large icebergs approxim...

  7. Analytical models for complex swirling flows

    Science.gov (United States)

    Borissov, A.; Hussain, V.

    1996-11-01

    We develops a new class of analytical solutions of the Navier-Stokes equations for swirling flows, and suggests ways to predict and control such flows occurring in various technological applications. We view momentum accumulation on the axis as a key feature of swirling flows and consider vortex-sink flows on curved axisymmetric surfaces with an axial flow. We show that these solutions model swirling flows in a cylindrical can, whirlpools, tornadoes, and cosmic swirling jets. The singularity of these solutions on the flow axis is removed by matching them with near-axis Schlichting and Long's swirling jets. The matched solutions model flows with very complex patterns, consisting of up to seven separation regions with recirculatory 'bubbles' and vortex rings. We apply the matched solutions for computing flows in the Ranque-Hilsch tube, in the meniscus of electrosprays, in vortex breakdown, and in an industrial vortex burner. The simple analytical solutions allow a clear understanding of how different control parameters affect the flow and guide selection of optimal parameter values for desired flow features. These solutions permit extension to other problems (such as heat transfer and chemical reaction) and have the potential of being significantly useful for further detailed investigation by direct or large-eddy numerical simulations as well as laboratory experimentation.

  8. An analytical model of crater count equilibrium

    Science.gov (United States)

    Hirabayashi, Masatoshi; Minton, David A.; Fassett, Caleb I.

    2017-06-01

    Crater count equilibrium occurs when new craters form at the same rate that old craters are erased, such that the total number of observable impacts remains constant. Despite substantial efforts to understand this process, there remain many unsolved problems. Here, we propose an analytical model that describes how a heavily cratered surface reaches a state of crater count equilibrium. The proposed model formulates three physical processes contributing to crater count equilibrium: cookie-cutting (simple, geometric overlap), ejecta-blanketing, and sandblasting (diffusive erosion). These three processes are modeled using a degradation parameter that describes the efficiency for a new crater to erase old craters. The flexibility of our newly developed model allows us to represent the processes that underlie crater count equilibrium problems. The results show that when the slope of the production function is steeper than that of the equilibrium state, the power law of the equilibrium slope is independent of that of the production function slope. We apply our model to the cratering conditions in the Sinus Medii region and at the Apollo 15 landing site on the Moon and demonstrate that a consistent degradation parameterization can successfully be determined based on the empirical results of these regions. Further developments of this model will enable us to better understand the surface evolution of airless bodies due to impact bombardment.

  9. A General Factor-Analytic Procedure for Assessing Response Bias in Questionnaire Measures

    Science.gov (United States)

    Ferrando, Pere J.; Lorenzo-Seva, Urbano; Chico, Eliseo

    2009-01-01

    This article proposes procedures for simultaneously assessing and controlling acquiescence and social desirability in questionnaire items. The procedures are based on a semi-restricted factor-analytic tridimensional model, and can be used with binary, graded-response, or more continuous items. We discuss procedures for fitting the model (item…

  10. Simple Analytic Models of Gravitational Collapse

    Energy Technology Data Exchange (ETDEWEB)

    Adler, R.

    2005-02-09

    Most general relativity textbooks devote considerable space to the simplest example of a black hole containing a singularity, the Schwarzschild geometry. However only a few discuss the dynamical process of gravitational collapse, by which black holes and singularities form. We present here two types of analytic models for this process, which we believe are the simplest available; the first involves collapsing spherical shells of light, analyzed mainly in Eddington-Finkelstein coordinates; the second involves collapsing spheres filled with a perfect fluid, analyzed mainly in Painleve-Gullstrand coordinates. Our main goal is pedagogical simplicity and algebraic completeness, but we also present some results that we believe are new, such as the collapse of a light shell in Kruskal-Szekeres coordinates.

  11. Radiative torques: Analytical Model and Basic Properties

    CERN Document Server

    Lazarian, Alex

    2007-01-01

    We attempt to get a physical insight into grain alignment processes by studying basic properties of radiative torques (RATs). For this purpose we consider a simple toy model of a helical grain that reproduces well the basic features of RATs. The model grain consists of a spheroidal body with a mirror attached at an angle to it. Being very simple, the model allows analytical description of RATs that act upon it. We show a good correspondence of RATs obtained for this model and those of irregular grains calculated by DDSCAT. Our analysis of the role of different torque components for grain alignment reveals that one of the three RAT components does not affect the alignment, but induces only for grain precession. The other two components provide a generic alignment with grain long axes perpendicular to the radiation direction, if the radiation dominates the grain precession, and perpendicular to magnetic field, otherwise. We study a self-similar scaling of RATs as a function of $\\lambda/a_{eff}$. We show that th...

  12. An analytical model of flagellate hydrodynamics

    Science.gov (United States)

    Dölger, Julia; Bohr, Tomas; Andersen, Anders

    2017-04-01

    Flagellates are unicellular microswimmers that propel themselves using one or several beating flagella. We consider a hydrodynamic model of flagellates and explore the effect of flagellar arrangement and beat pattern on swimming kinematics and near-cell flow. The model is based on the analytical solution by Oseen for the low Reynolds number flow due to a point force outside a no-slip sphere. The no-slip sphere represents the cell and the point force a single flagellum. By superposition we are able to model a freely swimming flagellate with several flagella. For biflagellates with left–right symmetric flagellar arrangements we determine the swimming velocity, and we show that transversal forces due to the periodic movements of the flagella can promote swimming. For a model flagellate with both a longitudinal and a transversal flagellum we determine radius and pitch of the helical swimming trajectory. We find that the longitudinal flagellum is responsible for the average translational motion whereas the transversal flagellum governs the rotational motion. Finally, we show that the transversal flagellum can lead to strong feeding currents to localized capture sites on the cell surface.

  13. Analytical model of Europa's O2 exosphere

    Science.gov (United States)

    Milillo, Anna; Plainaki, Christina; De Angelis, Elisabetta; Mangano, Valeria; Massetti, Stefano; Mura, Alessandro; Orsini, Stefano; Rispoli, Rosanna

    2016-10-01

    The origin of the exosphere of Europa is its water ice surface. The existing exosphere models, assuming either a collisionless environment (simple Monte Carlo techniques) or a kinetic approach (Direct Monte Carlo Method) both predict that the major constituent of the exosphere is molecular oxygen. Specifically, O2 is generated at the surface through radiolysis and chemical interactions of the water dissociation products. The non-escaping O2 molecules circulate around the moon impacting the surface several times, due to their long lifetime and due to their non- sticking, suffering thermalization to the surface temperature after each impact. In fact, the HST observations of the O emission lines proved the presence of an asymmetric atomic Oxygen distribution, related to a thin asymmetric molecular Oxygen atmosphere. The existing Monte Carlo models are not easily applicable as input of simulations devoted to the study of the plasma interactions with the moon. On the other hand, the simple exponential density profiles cannot well depict the higher temperature/higher altitudes component originating by radiolysis. It would thus be important to have a suitable and user-friendly model able to describe the major exospheric characteristics to use as a tool. This study presents an analytical 3D model that is able to describe the molecular Oxygen exosphere by reproducing the two-component profiles and the asymmetries due to diverse configurations among Europa, Jupiter and the Sun. This model is obtained by a non-linear fit procedure of the EGEON Monte Carlo model (Plainaki et al. 2013) to a Chamberlain density profile. Different parameters of the model are able to describe various exosphere properties thus allowing a detailed investigation of the exospheric characteristics. As an example a discussion on the exospheric temperatures in different configurations and space regions is given.

  14. Modeling Biodegradation and Reactive Transport: Analytical and Numerical Models

    Energy Technology Data Exchange (ETDEWEB)

    Sun, Y; Glascoe, L

    2005-06-09

    The computational modeling of the biodegradation of contaminated groundwater systems accounting for biochemical reactions coupled to contaminant transport is a valuable tool for both the field engineer/planner with limited computational resources and the expert computational researcher less constrained by time and computer power. There exists several analytical and numerical computer models that have been and are being developed to cover the practical needs put forth by users to fulfill this spectrum of computational demands. Generally, analytical models provide rapid and convenient screening tools running on very limited computational power, while numerical models can provide more detailed information with consequent requirements of greater computational time and effort. While these analytical and numerical computer models can provide accurate and adequate information to produce defensible remediation strategies, decisions based on inadequate modeling output or on over-analysis can have costly and risky consequences. In this chapter we consider both analytical and numerical modeling approaches to biodegradation and reactive transport. Both approaches are discussed and analyzed in terms of achieving bioremediation goals, recognizing that there is always a tradeoff between computational cost and the resolution of simulated systems.

  15. Analytic phase-factor equations for Talbot array illuminations.

    Science.gov (United States)

    Zhou, C; Stankovic, S; Tschudi, T

    1999-01-10

    Under specific circumstances the fractional Talbot effect can be described by simplified equations. We have obtained simplified analytic phase-factor equations to describe the relation between the pure-phase factors and their fractional Talbot distances behind a binary amplitude grating with an opening ratio of (1/M). We explain how these simple equations are obtained from the regularly rearranged neighboring phase differences. We point out that any intensity distribution with an irreducible opening ratio (M(N)/M) (M(N) illumination in this case. Experimental verification of our theoretical results is given.

  16. An Analytical Tire Model with Flexible Carcass for Combined Slips

    Directory of Open Access Journals (Sweden)

    Nan Xu

    2014-01-01

    Full Text Available The tire mechanical characteristics under combined cornering and braking/driving situations have significant effects on vehicle directional controls. The objective of this paper is to present an analytical tire model with flexible carcass for combined slip situations, which can describe tire behavior well and can also be used for studying vehicle dynamics. The tire forces and moments come mainly from the shear stress and sliding friction at the tread-road interface. In order to describe complicated tire characteristics and tire-road friction, some key factors are considered in this model: arbitrary pressure distribution; translational, bending, and twisting compliance of the carcass; dynamic friction coefficient; anisotropic stiffness properties. The analytical tire model can describe tire forces and moments accurately under combined slip conditions. Some important properties induced by flexible carcass can also be reflected. The structural parameters of a tire can be identified from tire measurements and the computational results using the analytical model show good agreement with test data.

  17. Pathophysiological domains underlying the metabolic syndrome: an alternative factor analytic strategy.

    Science.gov (United States)

    Peeters, Carel F W; Dziura, James; van Wesel, Floryt

    2014-10-01

    Factor analysis (FA) has become part and parcel in metabolic syndrome (MBS) research. Both exploration- and confirmation-driven factor analyzes are rampant. However, factor analytic results on MBS differ widely. A situation that is at least in part attributable to misapplication of FA. Here, our purpose was (i) to review factor analytic efforts in the study of MBS with emphasis on misusage of the FA model and (ii) to propose an alternative factor analytic strategy. The proposed factor analytic strategy consists of four steps and confronts weaknesses in application of the FA model. At its heart lies the explicit separation of dimensionality and pattern selection and the direct evaluation of competing inequality-constrained loading patterns. A high-profile MBS data set with anthropometric measurements on overweight children and adolescents is reanalyzed using this strategy. The reanalysis implied a more parsimonious constellation of pathophysiological domains underlying phenotypic expressions of MBS than the original analysis (and many other analyses). The results emphasize correlated factors of impaired glucose metabolism and impaired lipid metabolism. Pathophysiological domains underlying phenotypic expressions of MBS included in the analysis are driven by multiple interrelated metabolic impairments. These findings indirectly point to the possible existence of a multifactorial etiology. Copyright © 2014 Elsevier Inc. All rights reserved.

  18. Factor analytic study of the personality of female methadone outpatients.

    Science.gov (United States)

    Duthie, R B

    1980-10-01

    Several researchers have examined the personality of chemical abusers by employing a multivariate clustering strategy. All of these studies focused on hospitalized inpatient addicts. Only one included females in the study. The purpose of this study is to examine the transposed data factor analytically derived profiles of female methadone maintained outpatients. All clients were given the Mini-Mult short form version of the Minnesota Multiphasic Personality Inventory. Seventy profiles were randomly selected from 130 female profiles. Program Factor of the Analyses of Behavioral Sciences Data program series was employed in statistically processing this data. Descriptions of the five factors are provided. Most of the profile types seem to fall into the normal or personality disordered categories. Forth-two percent of the profiles were normal, 24% were Personality Disorders, 6% were Neurotic, and 28% were unclassified using five factors.

  19. Analytic modelling of production into complex

    NARCIS (Netherlands)

    Egberts, P.J.P.; Fokker, P.A.

    2007-01-01

    The vast amount of completion options Tor hydrocarbon reservoirs calls for fast productivity evaluation tools. We present a calculation method that can perform this task. It is a semi-analytical method that fully accounts for the 3D flow near the well. A superposition of analytical functions is tune

  20. Constraining the factor analytical solutions obtained from multiple-year receptor modeling of ambient PM2.5 data from five speciation sites in Ontario, Canada

    Science.gov (United States)

    Sofowote, Uwayemi M.; Su, Yushan; Dabek-Zlotorzynska, Ewa; Rastogi, Ankit K.; Brook, Jeff; Hopke, Philip K.

    2015-05-01

    Rotational ambiguity in factor analyses leads to solutions that are not always consistent with reality. The inherent non-negativity constraints in positive matrix factorization (PMF) help to prevent factor solutions from becoming overly unrealistic, but they are not sufficient to prevent unwanted rotations that could manifest in factors that should have similar compositions varying across multiple sites. The Canadian National Air Pollution Surveillance (NAPS) network operates five fine particulate matter (PM2.5) speciation sites in Ontario. Data from these sites from 2005 to 2010 were subjected to PMF to obtain factors representing sources of particulate matter. Eight factors were found to be common across these sites. These factors had profiles that varied greatly from one site to the other, suggesting that the PMF solutions were impacted by some rotational ambiguity. New features in the EPA PMF V5 program allow the use of a priori information to impose mathematical constraints that guide the evolution of the factor solutions. These constraints reduce the rotational space. In situations where major emissions sources are known and located in the neighborhood of receptors, or emissions inventories and literature source profiles exist, it is easy to use these profiles to force the factor solutions to conform to the expected signatures. In our case, reported source profiles were neither available nor applicable due to the large spatial span of potential sources and receptor sites. This work describes how such constraints can be generated and used in these complex situations. The fundamental principle explored in this work is the concept of 'stiffness' of PMF solutions to identify the desirable non-rotating factors.

  1. Comparison of analytical eddy current models using principal components analysis

    Science.gov (United States)

    Contant, S.; Luloff, M.; Morelli, J.; Krause, T. W.

    2017-02-01

    Monitoring the gap between the pressure tube (PT) and the calandria tube (CT) in CANDU® fuel channels is essential, as contact between the two tubes can lead to delayed hydride cracking of the pressure tube. Multifrequency transmit-receive eddy current non-destructive evaluation is used to determine this gap, as this method has different depths of penetration and variable sensitivity to noise, unlike single frequency eddy current non-destructive evaluation. An Analytical model based on the Dodd and Deeds solutions, and a second model that accounts for normal and lossy self-inductances, and a non-coaxial pickup coil, are examined for representing the response of an eddy current transmit-receive probe when considering factors that affect the gap response, such as pressure tube wall thickness and pressure tube resistivity. The multifrequency model data was analyzed using principal components analysis (PCA), a statistical method used to reduce the data set into a data set of fewer variables. The results of the PCA of the analytical models were then compared to PCA performed on a previously obtained experimental data set. The models gave similar results under variable PT wall thickness conditions, but the non-coaxial coil model, which accounts for self-inductive losses, performed significantly better than the Dodd and Deeds model under variable resistivity conditions.

  2. Analytical models of volcanic ellipsoidal expansion sources

    Directory of Open Access Journals (Sweden)

    Antonella Amoruso

    2013-11-01

    Full Text Available Modeling non-double-couple earthquakes and surficial deformation in volcanic and geothermal areas usually involves expansion sources. Given an ensemble of ellipsoidal or tensile expansion sources and double-couple ones, it is straightforward to obtain the equivalent single moment tensor under the far-field approximation. On the contrary, the moment tensor interpretation is by no means unique or unambiguous. If the far-field approximation is unsatisfied, the single moment tensor representation is inappropriate. Here we focus on the volume change estimate in the case of single sources, in particular finite pressurized ellipsoidal sources, presenting the expressions for the computation of the volume change and surficial displacement in a closed analytical form. We discuss the implications of different domains of the moment-tensor eigenvalue ratios in terms of volume change computation. We also discuss how the volume change of each source can be obtained from the isotropic component of the total moment tensor, in few cases of coupled sources where the total volume change is null. The new expressions for the computation of the volume change and surficial displacement in case of finite pressurized ellipsoidal sources should make their use easier with respect to the already published formulations.

  3. Psychometric Structure of a Comprehensive Objective Structured Clinical Examination: A Factor Analytic Approach

    Science.gov (United States)

    Volkan, Kevin; Simon, Steven R.; Baker, Harley; Todres, I. David

    2004-01-01

    Problem Statement and Background: While the psychometric properties of Objective Structured Clinical Examinations (OSCEs) have been studied, their latent structures have not been well characterized. This study examines a factor analytic model of a comprehensive OSCE and addresses implications for measurement of clinical performance. Methods: An…

  4. De Factorisatione Numerorum I : An Analytic Approach to Subexponential Factoring

    CERN Document Server

    Sica, Francesco

    2009-01-01

    We introduce a novel glance at factoring. In this work, we are chiefly concerned with the asymptotic aspect of the method, as we will show that this approach \\emph{almost} allows to deterministically factor a RSA modulus $N=pq$ in $O\\bigl(\\exp({\\log^\\epsilon N})\\bigr)$ bit operations for any $\\epsilon>0$. An important feature of this approach is that any bound is absolutely proven and does not rely on any assumption. The technique broached here departs from any know (at least to the author) factoring method. It is based on the study of carefully selected multiplicative functions in order to approximate them at $N$. Using their generating functions, expressed in terms of the Riemann zeta function, together with their functional equations, we derive an analytic identity which involves the computation of a family of series, which we call the \\emph{singular series} (as they embody an arithmetic information in analytic disguise), depending "minimally" on $N$. We finally show how the approximate computation of a ma...

  5. Transcription factor-based biosensors enlightened by the analyte.

    Directory of Open Access Journals (Sweden)

    Raul eFernandez-Lopez

    2015-07-01

    Full Text Available Whole cell biosensors (WCBs have multiple applications for environmental monitoring, detecting a wide range of pollutants. WCBs depend critically on the sensitivity and specificity of the transcription factor (TF used to detect the analyte. We describe the mechanism of regulation and the structural and biochemical properties of TF families that are used, or could be used, for the development of environmental WCBs. Focusing on the chemical nature of the analyte, we review TFs that respond to aromatic compounds (XylS-AraC, XylR-NtrC and LysR, metal ions (MerR, ArsR, DtxR, Fur and NikR or antibiotics (TetR and MarR. Analyzing the structural domains involved in DNA recognition, we highlight the similitudes in the DNA binding domains (DBDs of these TF families. Opposite to DBDs, the wide range of analytes detected by TFs results in a diversity of structures at the effector binding domain (EBD. The modular architecture of TFs opens the possibility of engineering TFs with hybrid DNA and effector specificities. Yet, the lack of a crisp correlation between structural domains and specific functions makes this a challenging task.

  6. X: A Comprehensive Analytic Model for Parallel Machines

    Energy Technology Data Exchange (ETDEWEB)

    Li, Ang; Song, Shuaiwen; Brugel, Eric; Kumar, Akash; Chavarría-Miranda, Daniel; Corporaal, Henk

    2016-05-23

    To continuously comply with Moore’s Law, modern parallel machines become increasingly complex. Effectively tuning application performance for these machines therefore becomes a daunting task. Moreover, identifying performance bottlenecks at application and architecture level, as well as evaluating various optimization strategies, are becoming extremely difficult when the entanglement of numerous correlated factors is being presented. To tackle these challenges, we present a visual analytical model named “X”. It is intuitive and sufficiently flexible to track all the typical features of a parallel machine.

  7. Global Processing Speed in Children with Low Reading Ability and in Children and Adults with Typical Reading Ability: Exploratory Factor Analytic Models

    Science.gov (United States)

    Peter, Beate; Matsushita, Mark; Raskind, Wendy H.

    2011-01-01

    Purpose: To investigate processing speed as a latent dimension in children with dyslexia and children and adults with typical reading skills. Method: Exploratory factor analysis (FA) was based on a sample of multigenerational families, each ascertained through a child with dyslexia. Eleven measures--6 of them timed--represented verbal and…

  8. Analytical model of internally coupled ears

    DEFF Research Database (Denmark)

    Vossen, Christine; Christensen-Dalsgaard, Jakob; Leo van Hemmen, J

    2010-01-01

    , data demonstrating an asymmetrical spatial pattern of membrane vibration. As the analytical calculations show, the internally coupled ears increase the directional response, appearing in large directional internal amplitude differences (iAD) and in large internal time differences (iTD). Numerical...... simulations of the eigenfunctions in an exemplary, realistically reconstructed mouth cavity further estimate the effects of its complex geometry....

  9. Analytic two-loop form factors in N=4 SYM

    CERN Document Server

    Brandhuber, Andreas; Yang, Gang

    2012-01-01

    We derive a compact expression for the three-point MHV form factors of half-BPS operators in N=4super Yang-Mills at two loops. The main tools of our calculation are generalised unitarity applied at the form factor level, and the compact expressions for supersymmetric tree-level form factors and amplitudes entering the cuts. We confirm that infrared divergences exponentiate as expected, and that collinear factorisation is entirely captured by an ABDK/BDS ansatz. Next, we construct the two-loop remainder function obtained by subtracting this ansatz from the full two-loop form factor and compute it numerically. Using symbology, combined with various physical constraints and symmetries, we find a unique solution for its symbol. With this input we construct a remarkably compact analytic expression for the remainder function, which contains only classical polylogarithms, and compare it to our numerical results. Furthermore, we make the surprising observation that our remainder is equal to the maximally transcendent...

  10. Analytic Models of High-Temperature Hohlraums

    Energy Technology Data Exchange (ETDEWEB)

    Stygar, W.A.; Olson, R.E.; Spielman, R.B.; Leeper, R.J.

    2000-11-29

    A unified set of high-temperature-hohlraum models has been developed. For a simple hohlraum, P{sub s} = [A{sub s}+(1{minus}{alpha}{sub W})A{sub W}+A{sub H}]{sigma}T{sub R}{sup 4} + (4V{sigma}/c)(dT{sub R}{sup r}/dt) where P{sub S} is the total power radiated by the source, A{sub s} is the source area, A{sub W} is the area of the cavity wall excluding the source and holes in the wall, A{sub H} is the area of the holes, {sigma} is the Stefan-Boltzmann constant, T{sub R} is the radiation brightness temperature, V is the hohlraum volume, and c is the speed of light. The wall albedo {alpha}{sub W} {triple_bond} (T{sub W}/T{sub R}){sup 4} where T{sub W} is the brightness temperature of area A{sub W}. The net power radiated by the source P{sub N} = P{sub S}-A{sub S}{sigma}T{sub R}{sup 4}, which suggests that for laser-driven hohlraums the conversion efficiency {eta}{sub CE} be defined as P{sub N}/P{sub LASER}. The characteristic time required to change T{sub R}{sup 4} in response to a change in P{sub N} is 4V/C[(l{minus}{alpha}{sub W})A{sub W}+A{sub H}]. Using this model, T{sub R}, {alpha}{sub W}, and {eta}{sub CE} can be expressed in terms of quantities directly measurable in a hohlraum experiment. For a steady-state hohlraum that encloses a convex capsule, P{sub N} = {l_brace}(1{minus}{alpha}{sub W})A{sub W}+A{sub H}+[(1{minus}{alpha}{sub C})(A{sub S}+A{sub W}{alpha}{sub W})A{sub C}/A{sub T}]{r_brace}{sigma}T{sub RC}{sup 4} where {alpha}{sub C} is the capsule albedo, A{sub C} is the capsule area, A{sub T} {triple_bond} (A{sub S}+A{sub W}+A{sub H}), and T{sub RC} is the brightness temperature of the radiation that drives the capsule. According to this relation, the capsule-coupling efficiency of the baseline National-Ignition-Facility (NIF) hohlraum is 15% higher than predicted by previous analytic expressions. A model of a hohlraum that encloses a z pinch is also presented.

  11. Clarivate Analytics: Continued Omnia vanitas Impact Factor Culture.

    Science.gov (United States)

    Teixeira da Silva, Jaime A; Bernès, Sylvain

    2017-02-23

    This opinion paper takes aim at an error made recently by Clarivate Analytics in which it sent out an email that congratulated academics for becoming exclusive members of academia's most cited elite, the Highly Cited Researchers (HCRs). However, that email was sent out to an undisclosed number of non-HCRs, who were offered an apology shortly after, through a bulk mail, which tried to down-play the importance of the error, all the while praising the true HCRs. When Clarivate Analytics senior management was contacted, the company declined to offer an indication of the number of academics who had been contacted and erroneously awarded the HCR status. We believe that this regrettable blunder, together with the opacity offered by the company, fortify the corporate attitude about the value of the journal impact factor (JIF), and what it represents, namely a marketing tool that is falsely used to equate citations with quality, worth, or influence. The continued commercialization of metrics such as the JIF is at the heart of their use to assess the "quality" of a researcher, their work, or a journal, and contributes to a great extent to driving scientific activities towards a futile endeavor.

  12. The Computer-Aided Analytic Process Model. Operations Handbook for the APM (Analytic Process Model) Demonstration Package. Appendix

    Science.gov (United States)

    1986-01-01

    The Analytic Process Model for System Design and Measurement: A Computer-Aided Tool for Analyzing Training Systems and Other Human-Machine Systems. A...separate companion volume--The Computer-Aided Analytic Process Model : Operations Handbook for the APM Demonstration Package is also available under

  13. An analytically based numerical method for computing view factors in real urban environments

    Science.gov (United States)

    Lee, Doo-Il; Woo, Ju-Wan; Lee, Sang-Hyun

    2016-11-01

    A view factor is an important morphological parameter used in parameterizing in-canyon radiative energy exchange process as well as in characterizing local climate over urban environments. For realistic representation of the in-canyon radiative processes, a complete set of view factors at the horizontal and vertical surfaces of urban facets is required. Various analytical and numerical methods have been suggested to determine the view factors for urban environments, but most of the methods provide only sky-view factor at the ground level of a specific location or assume simplified morphology of complex urban environments. In this study, a numerical method that can determine the sky-view factors (ψ ga and ψ wa ) and wall-view factors (ψ gw and ψ ww ) at the horizontal and vertical surfaces is presented for application to real urban morphology, which are derived from an analytical formulation of the view factor between two blackbody surfaces of arbitrary geometry. The established numerical method is validated against the analytical sky-view factor estimation for ideal street canyon geometries, showing a consolidate confidence in accuracy with errors of less than 0.2 %. Using a three-dimensional building database, the numerical method is also demonstrated to be applicable in determining the sky-view factors at the horizontal (roofs and roads) and vertical (walls) surfaces in real urban environments. The results suggest that the analytically based numerical method can be used for the radiative process parameterization of urban numerical models as well as for the characterization of local urban climate.

  14. An analytically linearized helicopter model with improved modeling accuracy

    Science.gov (United States)

    Jensen, Patrick T.; Curtiss, H. C., Jr.; Mckillip, Robert M., Jr.

    1991-01-01

    An analytically linearized model for helicopter flight response including rotor blade dynamics and dynamic inflow, that was recently developed, was studied with the objective of increasing the understanding, the ease of use, and the accuracy of the model. The mathematical model is described along with a description of the UH-60A Black Hawk helicopter and flight test used to validate the model. To aid in utilization of the model for sensitivity analysis, a new, faster, and more efficient implementation of the model was developed. It is shown that several errors in the mathematical modeling of the system caused a reduction in accuracy. These errors in rotor force resolution, trim force and moment calculation, and rotor inertia terms were corrected along with improvements to the programming style and documentation. Use of a trim input file to drive the model is examined. Trim file errors in blade twist, control input phase angle, coning and lag angles, main and tail rotor pitch, and uniform induced velocity, were corrected. Finally, through direct comparison of the original and corrected model responses to flight test data, the effect of the corrections on overall model output is shown.

  15. Analytical solutions of the lattice Boltzmann BGK model

    CERN Document Server

    Zou, Q; Doolen, G D; Zou, Qisu; Hou, Shuling; Doolen, Gary D.

    1995-01-01

    Abstract: Analytical solutions of the two dimensional triangular and square lattice Boltzmann BGK models have been obtained for the plain Poiseuille flow and the plain Couette flow. The analytical solutions are written in terms of the characteristic velocity of the flow, the single relaxation time representation of these two flows without any approximation.

  16. The Cycle of Warfare - Analysis of an Analytical Model

    DEFF Research Database (Denmark)

    Jensen, Mikkel Storm

    2016-01-01

    The abstract has the title: “The Cycle of Warfare - Analysis of an Analytical Model” The Cycle of Warfare is an analytical model designed to illustrate the coherence between the organization, doctrine and technology of a military entity and the influence of the surrounding society as expressed...

  17. Improvements of the Analytical Model of Monte Carlo

    Institute of Scientific and Technical Information of China (English)

    HE Qing-Fang; XU Zheng; TENG Feng; LIU De-Ang; XU Xu-Rong

    2006-01-01

    @@ By extending the conduction band structure, we set up a new analytical model in ZnS. Compared the results with both the old analytical model and the full band model, it is found that they are possibly in reasonable agreement with the full band method and we can improve the calculation precision. Another important work is to reduce the programme computation time using the method of data fitting scattering rate curves.

  18. Analytical delay models for RLC interconnects under ramp input

    Institute of Scientific and Technical Information of China (English)

    REN Yinglei; MAO Junfa; LI Xiaochun

    2007-01-01

    Analytical delay models for Resistance Inductance Capacitance (RLC)interconnects with ramp input are presented for difierent situations,which include overdamped,underdamped and critical response cases.The errors of delay estimation using the analytical models proposed in this paper are less bv 3%in comparison to the SPICE-computed delay.These models are meaningful for the delay analysis of actual circuits in which the input signal is ramp but not ideal step input.

  19. Design Evaluation of Wind Turbine Spline Couplings Using an Analytical Model: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Guo, Y.; Keller, J.; Wallen, R.; Errichello, R.; Halse, C.; Lambert, S.

    2015-02-01

    Articulated splines are commonly used in the planetary stage of wind turbine gearboxes for transmitting the driving torque and improving load sharing. Direct measurement of spline loads and performance is extremely challenging because of limited accessibility. This paper presents an analytical model for the analysis of articulated spline coupling designs. For a given torque and shaft misalignment, this analytical model quickly yields insights into relationships between the spline design parameters and resulting loads; bending, contact, and shear stresses; and safety factors considering various heat treatment methods. Comparisons of this analytical model against previously published computational approaches are also presented.

  20. Feedbacks Between Numerical and Analytical Models in Hydrogeology

    Science.gov (United States)

    Zlotnik, V. A.; Cardenas, M. B.; Toundykov, D.; Cohn, S.

    2012-12-01

    Hydrogeology is a relatively young discipline which combines elements of Earth science and engineering. Mature fundamental disciplines (e.g., physics, chemistry, fluid mechanics) have centuries-long history of mathematical modeling even prior to discovery of Darcy's law. Thus, in hydrogeology, relatively few classic analytical models (such those by Theis, Polubarinova-Kochina, Philip, Toth, Henry, Dagan, Neuman) were developed by the early 1970's. The advent of computers and practical demands refocused mathematical models towards numerical techniques. With more diverse but less mathematically-oriented training, most hydrogeologists shifted from analytical methods to use of standardized computational software. Spatial variability in internal properties and external boundary conditions and geometry, and the added complexity of chemical and biological processes will remain major challenges for analytical modeling. Possibly, analytical techniques will play a subordinate role to numerical approaches in many applications. On the other hand, the rise of analytical element modeling of groundwater flow is a strong alternative to numerical models when data demand and computational efficiency is considered. The hallmark of analytical models - transparency and accuracy - will remain indispensable for scientific exploration of complex phenomena and for benchmarking numerical models. Therefore, there will always be feedbacks and complementarities between numerical and analytical techniques, as well as a certain ideological schism among various views to modeling. We illustrate the idea of feedbacks by reviewing evolution of Joszef Toth's analytical model of gravity driven flow systems. Toth's (1963) approach was to reduce the flow domain to a rectangle which allowed for closed-form solution of the governing equations. Succeeding numerical finite-element models by Freeze and Witherspoon (1966-1968) explored the effects of geometry and heterogeneity on regional groundwater flow

  1. Correlated Data Analysis Modeling, Analytics, and Applications

    CERN Document Server

    Song, Peter X-K

    2007-01-01

    Presents developments in correlated data analysis. This book provides a systematic treatment for the topic of estimating functions. In addition to marginal models and mixed-effects models, it covers topics on joint regression analysis based on Gaussian copulas and generalized state space models for longitudinal data from long time series.

  2. Analytical model of diffuse reflectance spectrum of skin tissue

    Science.gov (United States)

    Lisenko, S. A.; Kugeiko, M. M.; Firago, V. A.; Sobchuk, A. N.

    2014-01-01

    We have derived simple analytical expressions that enable highly accurate calculation of diffusely reflected light signals of skin in the spectral range from 450 to 800 nm at a distance from the region of delivery of exciting radiation. The expressions, taking into account the dependence of the detected signals on the refractive index, transport scattering coefficient, absorption coefficient and anisotropy factor of the medium, have been obtained in the approximation of a two-layer medium model (epidermis and dermis) for the same parameters of light scattering but different absorption coefficients of layers. Numerical experiments on the retrieval of the skin biophysical parameters from the diffuse reflectance spectra simulated by the Monte Carlo method show that commercially available fibre-optic spectrophotometers with a fixed distance between the radiation source and detector can reliably determine the concentration of bilirubin, oxy- and deoxyhaemoglobin in the dermis tissues and the tissue structure parameter characterising the size of its effective scatterers. We present the examples of quantitative analysis of the experimental data, confirming the correctness of estimates of biophysical parameters of skin using the obtained analytical expressions.

  3. Analytical model of diffuse reflectance spectrum of skin tissue

    Energy Technology Data Exchange (ETDEWEB)

    Lisenko, S A; Kugeiko, M M; Firago, V A [Belarusian State University, Minsk (Belarus); Sobchuk, A N [B.I. Stepanov Institute of Physics, National Academy of Sciences of Belarus, Minsk (Belarus)

    2014-01-31

    We have derived simple analytical expressions that enable highly accurate calculation of diffusely reflected light signals of skin in the spectral range from 450 to 800 nm at a distance from the region of delivery of exciting radiation. The expressions, taking into account the dependence of the detected signals on the refractive index, transport scattering coefficient, absorption coefficient and anisotropy factor of the medium, have been obtained in the approximation of a two-layer medium model (epidermis and dermis) for the same parameters of light scattering but different absorption coefficients of layers. Numerical experiments on the retrieval of the skin biophysical parameters from the diffuse reflectance spectra simulated by the Monte Carlo method show that commercially available fibre-optic spectrophotometers with a fixed distance between the radiation source and detector can reliably determine the concentration of bilirubin, oxy- and deoxyhaemoglobin in the dermis tissues and the tissue structure parameter characterising the size of its effective scatterers. We present the examples of quantitative analysis of the experimental data, confirming the correctness of estimates of biophysical parameters of skin using the obtained analytical expressions. (biophotonics)

  4. Multilevel Mixture Factor Models

    Science.gov (United States)

    Varriale, Roberta; Vermunt, Jeroen K.

    2012-01-01

    Factor analysis is a statistical method for describing the associations among sets of observed variables in terms of a small number of underlying continuous latent variables. Various authors have proposed multilevel extensions of the factor model for the analysis of data sets with a hierarchical structure. These Multilevel Factor Models (MFMs)…

  5. A semi-analytic model of magnetized liner inertial fusion

    OpenAIRE

    McBride, Ryan D.; Slutz, Stephen A.

    2015-01-01

    Presented is a semi-analytic model of magnetized liner inertial fusion (MagLIF). This model accounts for several key aspects of MagLIF, including: (1) preheat of the fuel (optionally via laser absorption); (2) pulsed-power-driven liner implosion; (3) liner compressibility with an analytic equation of state, artificial viscosity, internal magnetic pressure, and ohmic heating; (4) adiabatic compression and heating of the fuel; (5) radiative losses and fuel opacity; (6) magnetic flux compression...

  6. Complex Analysis of Askaryan Radiation: A Fully Analytic Treatment including the LPM effect and Cascade Form Factor

    CERN Document Server

    Hanson, Jordan C

    2016-01-01

    The Askaryan effect describes coherent electromagnetic radiation from the collective charge within high-energy cascades in dense media. We present the first fully analytic model of Askaryan radiation that accounts simultaneously for the three-dimensional form factor of the electromagnetic cascade and the Landau-Pomeranchuk-Migdal (LPM) effect. Analytic calculations avoid computationally intensive Monte Carlo simulations of the cascades. Searches for cosmogenic neutrinos in Askaryan- based detectors benefit from computational speed, because neutrino event parameters affect the shape of the electromagnetic field, requiring scans of parameter space. The Askaryan field is derived and verified against Geant4 simulations, and compared with prior numerical and semi-analytic calculations. Finally, two special cases of the model are transformed from the Fourier domain to the time-domain, analytically. Next-generation in situ detectors like ARA and ARIANNA can use analytic time-domain signal models to search for phase ...

  7. Array independent MIMO channel models with analytical characteristics

    CERN Document Server

    Yao, Yuan; Feng, Zhenghe

    2011-01-01

    The conventional analytical channel models for multiple-input multiple-output (MIMO) wireless radio channels are array dependent. In this paper, we present several array independent MIMO channel models that inherit the essence of analytical models. The key idea is to decompose the physical scattering channel into two parts using the manifold decomposition technique: one is the wavefield independent sampling matrices depending on the antenna arrays only; the other is the array independent physical channel that can be individually modeled in an analytical manner. Based on the framework, we firstly extend the conventional virtual channel representation (VCR), which is restricted to uniform linear arrays (ULAs) so far, to a general version applicable to arbitrary array configurations. Then, we present two array independent stochastic MIMO channel models based on the proposed new VCR as well as the Weichselberger model. These two models are good at angular power spectrum (APS) estimation and capacity prediction, r...

  8. Modeling aquifer systems with analytic elements and subdomains

    Science.gov (United States)

    Fitts, C. R.

    2010-07-01

    A new approach for analytic element (AE) modeling of groundwater flow is presented. The approach divides the modeled region into polygonal subdomains, each with its own analytic flow model and its own local isotropic or anisotropic aquifer parameters. This allows analytic modeling of systems where the anisotropy ratio and direction vary spatially, an AE capability not possible without subdomains. It also allows for flexible layering in a model, with more layers in the area of interest abutting fewer layers in the far field. The approach is demonstrated in a model with seven subdomains and a mix of single-layer and triple-layer areas. Checks of the model indicate that the inter-subdomain boundary conditions can be approximated well, and where the differential equation is approximated (multilayer areas and transient flow), that approximation can be quite accurate.

  9. Analytical model for orbital debris environmental management

    Science.gov (United States)

    Talent, David L.

    1990-01-01

    A differential equation, also referred to as the PIB (particle-in-a-box) model, expressing the time rate of change of the number of objects in orbit, is developed, and its applicability is illustrated. The model can be used as a tool for the assessment of LEO environment stability, and as a starting point for the development of numerical evolutionary models. Within the context of the model, evolutionary scenarios are examined, and found to be sensitive to the growth rate. It is determined that the present environment is slightly unstable to catastrophic growth, and that the number of particles on orbit will continue to increase until approximately 2250-2350 AD, with a maximum of 2,000,000. The model is expandable to the more realistic (complex) case of multiple species in a multiple-tier system.

  10. Analytical model for orbital debris environmental management

    Science.gov (United States)

    Talent, David L.

    1990-01-01

    A differential equation, also referred to as the PIB (particle-in-a-box) model, expressing the time rate of change of the number of objects in orbit, is developed, and its applicability is illustrated. The model can be used as a tool for the assessment of LEO environment stability, and as a starting point for the development of numerical evolutionary models. Within the context of the model, evolutionary scenarios are examined, and found to be sensitive to the growth rate. It is determined that the present environment is slightly unstable to catastrophic growth, and that the number of particles on orbit will continue to increase until approximately 2250-2350 AD, with a maximum of 2,000,000. The model is expandable to the more realistic (complex) case of multiple species in a multiple-tier system.

  11. On the relevance of assumptions associated with classical factor analytic approaches.

    Science.gov (United States)

    Kasper, Daniel; Unlü, Ali

    2013-01-01

    A personal trait, for example a person's cognitive ability, represents a theoretical concept postulated to explain behavior. Interesting constructs are latent, that is, they cannot be observed. Latent variable modeling constitutes a methodology to deal with hypothetical constructs. Constructs are modeled as random variables and become components of a statistical model. As random variables, they possess a probability distribution in the population of reference. In applications, this distribution is typically assumed to be the normal distribution. The normality assumption may be reasonable in many cases, but there are situations where it cannot be justified. For example, this is true for criterion-referenced tests or for background characteristics of students in large scale assessment studies. Nevertheless, the normal procedures in combination with the classical factor analytic methods are frequently pursued, despite the effects of violating this "implicit" assumption are not clear in general. In a simulation study, we investigate whether classical factor analytic approaches can be instrumental in estimating the factorial structure and properties of the population distribution of a latent personal trait from educational test data, when violations of classical assumptions as the aforementioned are present. The results indicate that having a latent non-normal distribution clearly affects the estimation of the distribution of the factor scores and properties thereof. Thus, when the population distribution of a personal trait is assumed to be non-symmetric, we recommend avoiding those factor analytic approaches for estimation of a person's factor score, even though the number of extracted factors and the estimated loading matrix may not be strongly affected. An application to the Progress in International Reading Literacy Study (PIRLS) is given. Comments on possible implications for the Programme for International Student Assessment (PISA) complete the presentation.

  12. Analytical model of neutral gas shielding for hydrogen pellet ablation

    Energy Technology Data Exchange (ETDEWEB)

    Kuteev, Boris V.; Tsendin, Lev D. [State Technical Univ., St. Petersburg (Russian Federation)

    2001-11-01

    A kinetic gasdynamic scaling for hydrogen pellet ablation is obtained in terms of a neural gas shielding model using both numerical and analytical approaches. The scaling on plasma and pellet parameters proposed in the monoenergy approximation by Milora and Foster dR{sub pe}/dt{approx}S{sub n}{sup 2/3}R{sub p}{sup -2/3}q{sub eo}{sup 1/3}m{sub i}{sup -1/3} is confirmed. Here R{sub p} is the pellet radius, S{sub n} is the optical thickness of a cloud, q{sub eo} is the electron energy flux density and m{sub i} is the molecular mass. Only the numeral factor is approximately two times less than that for the monoenergy approach. Due to this effect, the pellet ablation rates, which were obtained by Kuteev on the basis of the Milora scaling, should be reduced by a factor of 1.7. Such a modification provides a reasonable agreement (even at high plasma parameters) between the two-dimensional kinetic model and the one-dimensional monoenergy approximation validated in contemporary tokamak experiments. As the could (in the kinetic approximation) is significantly thicker than that for the monoenergy case as well as the velocities of the gas flow are much slower, the relative effect of plasma and magnetic shielding on the ablation rate is strongly reduced. (author)

  13. Analytical Model for Hook Anchor Pull-Out

    DEFF Research Database (Denmark)

    Brincker, Rune; Ulfkjær, J. P.; Adamsen, P.

    1995-01-01

    A simple analytical model for the pull-out of a hook anchor is presented. The model is based on a simplified version of the fictitious crack model. It is assume that the fracture process is the pull-off of a cone shaped concrete part, simplifying the problem by assuming pure rigid body motions...

  14. Analytical Model for Hook Anchor Pull-out

    DEFF Research Database (Denmark)

    Brincker, Rune; Ulfkjær, J. P.; Adamsen, P.

    A simple analytical model for the pull-out of a hook anchor is presented. The model is based on a simplified version of the fictitious crack model. It is assumed that the fracture process is the pull-off of a cone shaped concrete part, simplifying the problem by assuming pure rigid body motions...

  15. The structure of temperament in preschoolers: a two-stage factor analytic approach.

    Science.gov (United States)

    Dyson, Margaret W; Olino, Thomas M; Durbin, C Emily; Goldsmith, H Hill; Klein, Daniel N

    2012-02-01

    The structure of temperament traits in young children has been the subject of extensive debate, with separate models proposing different trait dimensions. This research has relied almost exclusively on parent-report measures. The present study used an alternative approach, a laboratory observational measure, to explore the structure of temperament in preschoolers. A 2-stage factor analytic approach, exploratory factor analyses (n = 274) followed by confirmatory factor analyses (n = 276), was used. We retrieved an adequately fitting model that consisted of 5 dimensions: Sociability, Positive Affect/Interest, Dysphoria, Fear/Inhibition, and Constraint versus Impulsivity. This solution overlaps with, but is also distinct from, the major models derived from parent-report measures.

  16. Analytical Modeling of Groundwater Seepages to St. Lucie Estuary

    Science.gov (United States)

    Lee, J.; Yeh, G.; Hu, G.

    2008-12-01

    In this paper, six analytical models describing hydraulic interaction of stream-aquifer systems were applied to St Lucie Estuary (SLE) River Estuaries. These are analytical solutions for: (1) flow from a finite aquifer to a canal, (2) flow from an infinite aquifer to a canal, (3) the linearized Laplace system in a seepage surface, (4) wave propagation in the aquifer, (5) potential flow through stratified unconfined aquifers, and (6) flow through stratified confined aquifers. Input data for analytical solutions were obtained from monitoring wells and river stages at seepage-meter sites. Four transects in the study area are available: Club Med, Harbour Ridge, Lutz/MacMillan, and Pendarvis Cove located in the St. Lucie River. The analytical models were first calibrated with seepage meter measurements and then used to estimate of groundwater discharges into St. Lucie River. From this process, analytical relationships between the seepage rate and river stages and/or groundwater tables were established to predict the seasonal and monthly variation in groundwater seepage into SLE. It was found the seepage rate estimations by analytical models agreed well with measured data for some cases but only fair for some other cases. This is not unexpected because analytical solutions have some inherently simplified assumptions, which may be more valid for some cases than the others. From analytical calculations, it is possible to predict approximate seepage rates in the study domain when the assumptions underlying these analytical models are valid. The finite and infinite aquifer models and the linearized Laplace method are good for sites Pendarvis Cove and Lutz/MacMillian, but fair for the other two sites. The wave propagation model gave very good agreement in phase but only fairly agreement in magnitude for all four sites. The stratified unconfined and confined aquifer models gave similarly good agreements with measurements at three sites but poorly at the Club Med site. None of

  17. Meta-analytic structural equation modelling

    CERN Document Server

    Jak, Suzanne

    2015-01-01

    This book explains how to employ MASEM, the combination of meta-analysis (MA) and structural equation modelling (SEM). It shows how by using MASEM, a single model can be tested to explain the relationships between a set of variables in several studies. This book gives an introduction to MASEM, with a focus on the state of the art approach: the two stage approach of Cheung and Cheung & Chan. Both, the fixed and the random approach to MASEM are illustrated with two applications to real data. All steps that have to be taken to perform the analyses are discussed extensively. All data and syntax files are available online, so that readers can imitate all analyses. By using SEM for meta-analysis, this book shows how to benefit from all available information from all available studies, even if few or none of the studies report about all relationships that feature in the full model of interest.

  18. Analytic modeling of the subthreshold behavior in MOSFET

    Science.gov (United States)

    Liu, C. W.; Hsieh, T. X.

    2000-09-01

    An analytic model is derived to describe the bias-dependent behavior of the subthreshold swing in MOSFETs for the uniform channel and the ion-implanted channel, and is compared to two-dimensional simulation, Tsividis' model and Brews' model. This simple analytical model confirms that the subthreshold swing is a function of the gate-source bias and exhibits a global minimum in the weak inversion region. This model is based on Tsividis' current equations and assumes that the surface potential difference between the drain and the source is small for the gate-source voltage below the threshold voltage. This yields a conventional exponential form of the subthreshold current, and the subthreshold swing can be obtained analytically from this current equation.

  19. Analytical model of impedance in elliptical beam pipes

    CERN Document Server

    Pesah, Arthur Chalom

    2017-01-01

    Beam instabilities are among the main limitations in building higher intensity accelerators. Having a good impedance model for every accelerators is necessary in order to build components that minimize the probability of instabilities caused by the interaction beam-environment and to understand what piece to change in case of intensity increasing. Most of accelerator components have their impedance simulated with finite elements method (using softwares like CST Studio), but simple components such as circular or flat pipes are modeled analytically, with a decreasing computation time and an increasing precision compared to their simulated model. Elliptical beam pipes, while being a simple component present in some accelerators, still misses a good analytical model working for the hole range of velocities and frequencies. In this report, we present a general framework to study the impedance of elliptical pipes analytically. We developed a model for both longitudinal and transverse impedance, first in the case of...

  20. An analytic model with critical behavior in black hole formation

    CERN Document Server

    Koike, T; Koike, Tatsuhiko; Mishima, Takashi

    1995-01-01

    A simple analytic model is presented which exhibits a critical behavior in black hole formation, namely, collapse of a thin shell coupled with outgoing null fluid. It is seen that the critical behavior is caused by the gravitational nonlinearity near the event horizon. We calculate the value of the critical exponent analytically and find that it is very dependent on the coupling constants of the system.

  1. Analytical results for a three-phase traffic model.

    Science.gov (United States)

    Huang, Ding-wei

    2003-10-01

    We study analytically a cellular automaton model, which is able to present three different traffic phases on a homogeneous highway. The characteristics displayed in the fundamental diagram can be well discerned by analyzing the evolution of density configurations. Analytical expressions for the traffic flow and shock speed are obtained. The synchronized flow in the intermediate-density region is the result of aggressive driving scheme and determined mainly by the stochastic noise.

  2. Applying fuzzy analytic network process in quality function deployment model

    Directory of Open Access Journals (Sweden)

    Mohammad Ali Afsharkazemi

    2012-08-01

    Full Text Available In this paper, we propose an empirical study of QFD implementation when fuzzy numbers are used to handle the uncertainty associated with different components of the proposed model. We implement fuzzy analytical network to find the relative importance of various criteria and using fuzzy numbers we calculate the relative importance of these factors. The proposed model of this paper uses fuzzy matrix and house of quality to study the products development in QFD and also the second phase i.e. part deployment. In most researches, the primary objective is only on CRs to implement the quality function deployment and some other criteria such as production costs, manufacturing costs etc were disregarded. The results of using fuzzy analysis network process based on the QFD model in Daroupat packaging company to develop PVDC show that the most important indexes are being waterproof, resistant pill packages, and production cost. In addition, the PVDC coating is the most important index in terms of company experts’ point of view.

  3. Analytical Models for Gravitating Radiating Systems

    Directory of Open Access Journals (Sweden)

    B. P. Brassel

    2015-01-01

    Full Text Available We analyse the gravitational behaviour of a relativistic heat conducting fluid in a shear-free spherically symmetric spacetime. We show that the isotropy of pressure is a consistency condition which realises a second order nonlinear ordinary differential equation with variable coefficients in the gravitational potentials. Several new classes of solutions are found to the governing equation by imposing various forms on one of the potentials. Interestingly, a complex transformation leads to an exact solution with only real metric functions. All solutions are written in terms of elementary functions. We demonstrate graphically that the fluid pressure, energy density, and heat flux are well behaved for the model, and the model is consistent with a core-envelope framework.

  4. Analytical and Numerical Modeling for Flexible Pipes

    Institute of Scientific and Technical Information of China (English)

    WANG Wei; CHEN Geng

    2011-01-01

    The unbonded flexible pipe of eight layers,in which all the layers except the carcass layer are assumed to have isotropic properties,has been analyzed.Specifically,the carcass layer shows the orthotropic characteristics.The effective elastic moduli of the carcass layer have been developed in terms of the influence of deformation to stiffness.With consideration of the effective elastic moduli,the structure can be properly analyzed.Also the relative movements of tendons and relative displacements of wires in helical armour layer have been investigated.A three-dimensional nonlinear finite element model has been presented to predict the response of flexible pipes under axial force and torque.Further,the friction and contact of interlayer have been considered.Comparison between the finite element model and experimental results obtained in literature has been given and discussed,which might provide practical and technical support for the application of unbonded flexible pipes.

  5. Analytical models for gravitating radiating systems

    CERN Document Server

    Brassel, B P; Govender, G

    2015-01-01

    We analyse the gravitational behaviour of a relativistic heat conducting fluid in a shear-free spherically symmetric spacetime. We show that the isotropy of pressure is a consistency condition which realises a second order nonlinear ordinary differential equation with variable coefficients in the gravitational potentials. Several new classes of solutions are found to the governing equation by imposing various forms on one of the potentials. Interestingly, a complex transformation leads to an exact solution with only real metric functions. All solutions are written in terms of elementary functions. We demonstrate graphically that the fluid pressure, energy density and heat flux are well behaved for the model, and the model is consistent with a core-envelope framework.

  6. Analytical and numerical modeling for flexible pipes

    Science.gov (United States)

    Wang, Wei; Chen, Geng

    2011-12-01

    The unbonded flexible pipe of eight layers, in which all the layers except the carcass layer are assumed to have isotropic properties, has been analyzed. Specifically, the carcass layer shows the orthotropic characteristics. The effective elastic moduli of the carcass layer have been developed in terms of the influence of deformation to stiffness. With consideration of the effective elastic moduli, the structure can be properly analyzed. Also the relative movements of tendons and relative displacements of wires in helical armour layer have been investigated. A three-dimensional nonlinear finite element model has been presented to predict the response of flexible pipes under axial force and torque. Further, the friction and contact of interlayer have been considered. Comparison between the finite element model and experimental results obtained in literature has been given and discussed, which might provide practical and technical support for the application of unbonded flexible pipes.

  7. Haskell financial data modeling and predictive analytics

    CERN Document Server

    Ryzhov, Pavel

    2013-01-01

    This book is a hands-on guide that teaches readers how to use Haskell's tools and libraries to analyze data from real-world sources in an easy-to-understand manner.This book is great for developers who are new to financial data modeling using Haskell. A basic knowledge of functional programming is not required but will be useful. An interest in high frequency finance is essential.

  8. A Simple Analytic ICP Model and Comparison to Experiment

    Science.gov (United States)

    Juliano, Daniel R.; Hayden, Douglas B.; Ruzic, David N.

    1996-10-01

    An analytic model is developed for a cylindrically symmetric inductively coupled plasma system in order to find the electron temperature and density distribution. Boltzmann's equation is solved by a computer code using a 2-term spherical harmonic expansion. Analytic results are compared to experimental measurements made with a Langmuir probe. The apparatus is a magnetron system (magnetron system donated by MRC) with an RF coil or other ionization source inserted between the target and substrate. Far from the target, the resulting plasma is dominated by this ionization source, so the plasma at the magnetron target is not accounted for in the analytic model. In the model, electric and magnetic fields from the RF coil are found as a function of position and the power deposition profile is calculated. Insights gained from this model have been used to guide research efforts in ionizing the sputter flux in the magnetron.

  9. Analytical Model for High Impedance Fault Analysis in Transmission Lines

    Directory of Open Access Journals (Sweden)

    S. Maximov

    2014-01-01

    Full Text Available A high impedance fault (HIF normally occurs when an overhead power line physically breaks and falls to the ground. Such faults are difficult to detect because they often draw small currents which cannot be detected by conventional overcurrent protection. Furthermore, an electric arc accompanies HIFs, resulting in fire hazard, damage to electrical devices, and risk with human life. This paper presents an analytical model to analyze the interaction between the electric arc associated to HIFs and a transmission line. A joint analytical solution to the wave equation for a transmission line and a nonlinear equation for the arc model is presented. The analytical model is validated by means of comparisons between measured and calculated results. Several cases of study are presented which support the foundation and accuracy of the proposed model.

  10. Analytical Modeling of Uplink Cellular Networks

    CERN Document Server

    Novlan, Thomas D; Andrews, Jeffrey G

    2012-01-01

    Cellular uplink analysis has typically been undertaken by either a simple approach that lumps all interference into a single deterministic or random parameter in a Wyner-type model, or via complex system level simulations that often do not provide insight into why various trends are observed. This paper proposes a novel middle way that is both accurate and also results in easy-to-evaluate integral expressions based on the Laplace transform of the interference. We assume mobiles and base stations are randomly placed in the network with each mobile pairing up to its closest base station. The model requires two important changes compared to related recent work on the downlink. First, dependence is introduced between the user and base station point processes to make sure each base station serves a single mobile in the given resource block. Second, per-mobile power control is included, which further couples the locations of the mobiles and their receiving base stations. Nevertheless, we succeed in deriving the cov...

  11. Analytic solution of simplified Cardan's shaft model

    Directory of Open Access Journals (Sweden)

    Zajíček M.

    2014-12-01

    Full Text Available Torsional oscillations and stability assessment of the homokinetic Cardan shaft with a small misalignment angle is described in this paper. The simplified mathematical model of this system leads to the linearized equation of the Mathieu's type. This equation with and without a stationary damping parameter is considered. The solution of the original differential equation is identical with those one of the Fredholm’s integral equation with degenerated kernel assembled by means of a periodic Green's function. The conditions of solvability of such problem enable the identification of the borders between stability and instability regions. These results are presented in the form of stability charts and they are verified using the Floquet theory. The correctness of oscillation results for the system with periodic stiffness is then validated by means of the Runge-Kutta integration method.

  12. Analytic regularization of the Yukawa model at finite temperature

    CERN Document Server

    Malbouisson, A P C; Svaiter, N F

    1996-01-01

    We analyse the one-loop fermionic contribution for the scalar effective potential in the temperature dependent Yukawa model. In order to regularize the model a mix between dimensional and analytic regularization procedures is used. We find a general expression for the fermionic contribution in arbitrary spacetime dimension. It is found that in D=3 this contribution is finite.

  13. A physically based analytical spatial air temperature and humidity model

    Science.gov (United States)

    Yang Yang; Theodore A. Endreny; David J. Nowak

    2013-01-01

    Spatial variation of urban surface air temperature and humidity influences human thermal comfort, the settling rate of atmospheric pollutants, and plant physiology and growth. Given the lack of observations, we developed a Physically based Analytical Spatial Air Temperature and Humidity (PASATH) model. The PASATH model calculates spatial solar radiation and heat...

  14. Maximum Likelihood Estimation in Meta-Analytic Structural Equation Modeling

    Science.gov (United States)

    Oort, Frans J.; Jak, Suzanne

    2016-01-01

    Meta-analytic structural equation modeling (MASEM) involves fitting models to a common population correlation matrix that is estimated on the basis of correlation coefficients that are reported by a number of independent studies. MASEM typically consist of two stages. The method that has been found to perform best in terms of statistical…

  15. An Analytical Model of Wake Deflection Due to Shear Flow

    NARCIS (Netherlands)

    Micallef, D.; Simao Ferreira, C.J.; Sant, T.; Van Bussel, G.J.W.

    2010-01-01

    The main motivation behind this work is to create a purely analytical engineering model for wind turbine wake upward deflection due to shear flow, by developing a closed form solution of the velocity field due to an oblique vortex ring. The effectiveness of the model is evaluated by comparing the re

  16. Enabling analytical and Modeling Tools for Enhanced Disease Surveillance

    Energy Technology Data Exchange (ETDEWEB)

    Dawn K. Manley

    2003-04-01

    Early detection, identification, and warning are essential to minimize casualties from a biological attack. For covert attacks, sick people are likely to provide the first indication of an attack. An enhanced medical surveillance system that synthesizes distributed health indicator information and rapidly analyzes the information can dramatically increase the number of lives saved. Current surveillance methods to detect both biological attacks and natural outbreaks are hindered by factors such as distributed ownership of information, incompatible data storage and analysis programs, and patient privacy concerns. Moreover, because data are not widely shared, few data mining algorithms have been tested on and applied to diverse health indicator data. This project addressed both integration of multiple data sources and development and integration of analytical tools for rapid detection of disease outbreaks. As a first prototype, we developed an application to query and display distributed patient records. This application incorporated need-to-know access control and incorporated data from standard commercial databases. We developed and tested two different algorithms for outbreak recognition. The first is a pattern recognition technique that searches for space-time data clusters that may signal a disease outbreak. The second is a genetic algorithm to design and train neural networks (GANN) that we applied toward disease forecasting. We tested these algorithms against influenza, respiratory illness, and Dengue Fever data. Through this LDRD in combination with other internal funding, we delivered a distributed simulation capability to synthesize disparate information and models for earlier recognition and improved decision-making in the event of a biological attack. The architecture incorporates user feedback and control so that a user's decision inputs can impact the scenario outcome as well as integrated security and role-based access-control for communicating

  17. A Unified Channel Charges Expression for Analytic MOSFET Modeling

    Directory of Open Access Journals (Sweden)

    Hugues Murray

    2012-01-01

    Full Text Available Based on a 1D Poissons equation resolution, we present an analytic model of inversion charges allowing calculation of the drain current and transconductance in the Metal Oxide Semiconductor Field Effect Transistor. The drain current and transconductance are described by analytical functions including mobility corrections and short channel effects (CLM, DIBL. The comparison with the Pao-Sah integral shows excellent accuracy of the model in all inversion modes from strong to weak inversion in submicronics MOSFET. All calculations are encoded with a simple C program and give instantaneous results that provide an efficient tool for microelectronics users.

  18. Analytical Model for Fictitious Crack Propagation in Concrete Beams

    DEFF Research Database (Denmark)

    Ulfkjær, J. P.; Krenk, Steen; Brincker, Rune

    1995-01-01

    An analytical model for load-displacement curves of concrete beams is presented. The load-displacement curve is obtained by combining two simple models. The fracture is modeled by a fictitious crack in an elastic layer around the midsection of the beam. Outside the elastic layer the deformations ...... starts to grow correspond to the same bending moment. Closed-form solutions for the maximum size of the fracture zone and the minimum slope on the load-displacement curve are given.......An analytical model for load-displacement curves of concrete beams is presented. The load-displacement curve is obtained by combining two simple models. The fracture is modeled by a fictitious crack in an elastic layer around the midsection of the beam. Outside the elastic layer the deformations...

  19. An analytic toy model for relativistic accretion in Kerr spacetime

    CERN Document Server

    Tejeda, Emilio; Miller, John C

    2013-01-01

    We present a relativistic model for the stationary axisymmetric accretion flow of a rotating cloud of non-interacting particles falling onto a Kerr black hole. Based on a ballistic approximation, streamlines are described analytically in terms of timelike geodesics, while a simple numerical scheme is introduced for calculating the density field. A novel approach is presented for describing all of the possible types of orbit by means of a single analytic expression. This model is a useful tool for highlighting purely relativistic signatures in the accretion flow dynamics coming from a strong gravitational field with frame-dragging. In particular, we explore the coupling due to this between the spin of the black hole and the angular momentum of the infalling matter. Moreover, we demonstrate how this analytic solution may be used for benchmarking general relativistic numerical hydrodynamics codes by comparing it against results of smoothed particle hydrodynamics simulations for a collapsar-like setup. These simu...

  20. Web Analytics: Models of Engagement Metrics in New Media

    Directory of Open Access Journals (Sweden)

    Sionara Ioco Okada

    2012-02-01

    Full Text Available The measurement and continuous monitoring of market actions leads to knowledge of consumer behavior, not only on variables such as frequency, recentness, and value for money, but also engagement in questions and interaction with the product and / or trademark. The development of metrics for different medias increases the amount of useful information on the consumption profile enabling the optimization of digital strategies to targeted audiences. This article is an update that aims to review the latest publications on models of metrics - web analytics- WA Consistent digital strategy and emerging media platforms. The methodology used is a secondary research, particularly reviewing literature, aiming to update and conduct a comparative analysis of three models of web analytics- wa for organizations that operate in electronic retailing, using different digital channels. The study focuses on: i Model of Five Stages of competition analysis, proposed by Davenport ii Model maturity in web analytics, proposed by Hammel iii Model Web analytics Scorecard proposed by Giuntini & Morier. In order to strengthen the interaction and metrics engagement as the main protagonists of contemporary digital strategies the expansion of M-commerce and the advent of Social Commerce are assumed to be irreversible trends. It requires the participation of organizations that operate in electronic retailing, metrics and performance indicators for continuous monitoring of consumer behavior. 

  1. An Analytic Radiative-Convective Model for Planetary Atmospheres

    CERN Document Server

    Robinson, Tyler D; 10.1088/0004-637X/757/1/104

    2012-01-01

    We present an analytic 1-D radiative-convective model of the thermal structure of planetary atmospheres. Our model assumes that thermal radiative transfer is gray and can be represented by the two-stream approximation. Model atmospheres are assumed to be in hydrostatic equilibrium, with a power law scaling between the atmospheric pressure and the gray thermal optical depth. The convective portions of our models are taken to follow adiabats that account for condensation of volatiles through a scaling parameter to the dry adiabat. By combining these assumptions, we produce simple, analytic expressions that allow calculations of the atmospheric pressure-temperature profile, as well as expressions for the profiles of thermal radiative flux and convective flux. We explore the general behaviors of our model. These investigations encompass (1) worlds where atmospheric attenuation of sunlight is weak, which we show tend to have relatively high radiative-convective boundaries, (2) worlds with some attenuation of sunli...

  2. Learning, Learning Analytics, Activity Visualisation and Open learner Model

    DEFF Research Database (Denmark)

    Bull, Susan; Kickmeier-Rust, Michael; Vatrapu, Ravi

    2013-01-01

    This paper draws on visualisation approaches in learning analytics, considering how classroom visualisations can come together in practice. We suggest an open learner model in situations where many tools and activity visualisations produce more visual information than can be readily interpreted....

  3. Analytical modeling of printed metasurface cavities for computational imaging

    Science.gov (United States)

    F. Imani, Mohammadreza; Sleasman, Timothy; Gollub, Jonah N.; Smith, David R.

    2016-10-01

    We derive simple analytical expressions to model the electromagnetic response of an electrically large printed cavity. The analytical model is then used to develop printed cavities for microwave imaging purposes. The proposed cavity is excited by a cylindrical source and has boundaries formed by subwavelength metallic cylinders (vias) placed at subwavelength distances apart. Given their small size, the electric currents induced on the vias are assumed to have no angular dependence. Applying this approximation simplifies the electromagnetic problem to a matrix equation which can be solved to directly compute the electric current induced on each via. Once the induced currents are known, the electromagnetic field inside the cavity can be computed for every location. We verify the analytical model by comparing its prediction to full-wave simulations. To utilize this cavity in imaging settings, we perforate one side of the printed cavity with radiative slots such that they act as the physical layer of a computational imaging system. An analytical approximation for the slots is also developed, enabling us to obtain estimates of the cavity performance in imaging scenarios. This ability allows us to make informed decisions on the design of the printed metasurface cavity. The utility of the proposed model is further highlighted by demonstrating high-quality experimental imaging; performance metrics, which are consistent between theory and experiment, are also estimated.

  4. Synthesis and Analytical Centrifugation of Magnetic Model Colloids

    NARCIS (Netherlands)

    Luigjes, B.

    2012-01-01

    This thesis is a study of the preparation and thermodynamic properties of magnetic colloids. First, two types of magnetic model colloids are investigated: composite colloids and single-domain nanoparticles. Thermodynamics of magnetic colloids is studied using analytical centrifugation, including a

  5. Foam for Enhanced Oil Recovery: Modeling and Analytical Solutions

    NARCIS (Netherlands)

    Ashoori, E.

    2012-01-01

    Foam increases sweep in miscible- and immiscible-gas enhanced oil recovery by decreasing the mobility of gas enormously. This thesis is concerned with the simulations and analytical solutions for foam flow for the purpose of modeling foam EOR in a reservoir. For the ultimate goal of upscaling our mo

  6. An Analytical Model for Learning: An Applied Approach.

    Science.gov (United States)

    Kassebaum, Peter Arthur

    A mediated-learning package, geared toward non-traditional students, was developed for use in the College of Marin's cultural anthropology courses. An analytical model for learning was used in the development of the package, utilizing concepts related to learning objectives, programmed instruction, Gestalt psychology, cognitive psychology, and…

  7. Evaluating Modeling Sessions Using the Analytic Hierarchy Process

    NARCIS (Netherlands)

    Ssebuggwawo, D.; Hoppenbrouwers, S.J.B.A.; Proper, H.A.

    2008-01-01

    In this paper, which is methodological in nature, we propose to use an established method from the field of Operations Research, the Analytic Hierarchy Process (AHP), in the integrated, stakeholder- oriented evaluation of enterprise modeling sessions: their language, pro- cess, tool (medium), and pr

  8. MODEL ANALYTICAL NETWORK PROCESS (ANP DALAM PENGEMBANGAN PARIWISATA DI JEMBER

    Directory of Open Access Journals (Sweden)

    Sukidin Sukidin

    2015-04-01

    Full Text Available Abstrak    : Model Analytical Network Process (ANP dalam Pengembangan Pariwisata di Jember. Penelitian ini mengkaji kebijakan pengembangan pariwisata di Jember, terutama kebijakan pengembangan agrowisata perkebunan kopi dengan menggunakan Jember Fashion Carnival (JFC sebagai event marketing. Metode yang digunakan adalah soft system methodology dengan menggunakan metode analitis jaringan (Analytical Network Process. Penelitian ini menemukan bahwa pengembangan pariwisata di Jember masih dilakukan dengan menggunakan pendekatan konvensional, belum terkoordinasi dengan baik, dan lebih mengandalkan satu even (atraksi pariwisata, yakni JFC, sebagai lokomotif daya tarik pariwisata Jember. Model pengembangan konvensional ini perlu dirancang kembali untuk memperoleh pariwisata Jember yang berkesinambungan. Kata kunci: pergeseran paradigma, industry pariwisata, even pariwisata, agrowisata Abstract: Analytical Network Process (ANP Model in the Tourism Development in Jember. The purpose of this study is to conduct a review of the policy of tourism development in Jember, especially development policies for coffee plantation agro-tourism by using Jember Fashion Carnival (JFC as event marketing. The research method used is soft system methodology using Analytical Network Process. The result shows that the tourism development in Jember is done using a conventional approach, lack of coordination, and merely focus on a single event tourism, i.e. the JFC, as locomotive tourism attraction in Jember. This conventional development model needs to be redesigned to reach Jember sustainable tourism development. Keywords: paradigm shift, tourism industry, agro-tourism

  9. Synthesis and Analytical Centrifugation of Magnetic Model Colloids

    NARCIS (Netherlands)

    Luigjes, B.

    2012-01-01

    This thesis is a study of the preparation and thermodynamic properties of magnetic colloids. First, two types of magnetic model colloids are investigated: composite colloids and single-domain nanoparticles. Thermodynamics of magnetic colloids is studied using analytical centrifugation, including a s

  10. Analytical Models of Legislative Texts for Muslim Scholars

    Science.gov (United States)

    Alwan, Ammar Abdullah Naseh; Yusoff, Mohd Yakubzulkifli Bin Mohd; Al-Hami, Mohammad Said M.

    2011-01-01

    The significance of the analytical models in traditional Islamic studies is that they contribute in sharpening the intellectual capacity of the students of Islamic studies. Research literature in Islamic studies has descriptive side predominantly; the information is gathered and compiled and rarely analyzed properly. This weakness is because of…

  11. Foam for Enhanced Oil Recovery: Modeling and Analytical Solutions

    NARCIS (Netherlands)

    Ashoori, E.

    2012-01-01

    Foam increases sweep in miscible- and immiscible-gas enhanced oil recovery by decreasing the mobility of gas enormously. This thesis is concerned with the simulations and analytical solutions for foam flow for the purpose of modeling foam EOR in a reservoir. For the ultimate goal of upscaling our mo

  12. Bubbles in inkjet printheads : analytical and numerical models

    NARCIS (Netherlands)

    Jeurissen, Roger Josef Maria

    2009-01-01

    The phenomenon of nozzle failure of an inkjet printhead due to entrainment of air bubbles was studies using analytical and numerical models. The studied inkjet printheads consist of many channels in which an acoustic field is generated to eject a droplet. When an air bubble is entrained, it disrupts

  13. Analytical model of micromachining of brittle materials with sharp particles

    NARCIS (Netherlands)

    Moktadir, Z.; Wensink, H.; Kraft, M.

    2005-01-01

    We present an analytical model for the powder blasting of brittle materials with sharp particles. We developed a continuum equation, which describes the surface evolution during the powder blasting, into which we introduced surface energetics as the major relaxation mechanism. The experimental and t

  14. Analytical approach to quasiperiodic beam Coulomb field modeling

    Science.gov (United States)

    Rubtsova, I. D.

    2016-09-01

    The paper is devoted to modeling of space charge field of quasiperiodic axial- symmetric beam. Particle beam is simulated by charged disks. Two analytical Coulomb field expressions are presented, namely, Fourier-Bessel series and trigonometric polynomial. Both expressions permit the integral representation. It provides the possibility of integro-differential beam dynamics description. Consequently, when beam dynamics optimization problem is considered, it is possible to derive the analytical formula for quality functional gradient and to apply directed optimization methods. In addition, the paper presents the method of testing of space charge simulation code.

  15. Analytical model of plasma-chemical etching in planar reactor

    Science.gov (United States)

    Veselov, D. S.; Bakun, A. D.; Voronov, Yu A.; Kireev, V. Yu; Vasileva, O. V.

    2016-09-01

    The paper discusses an analytical model of plasma-chemical etching in planar diode- type reactor. Analytical expressions of etch rate and etch anisotropy were obtained. It is shown that etch anisotropy increases with increasing the ion current and ion energy. At the same time, etch selectivity of processed material decreases as compared with the mask. Etch rate decreases with the distance from the centre axis of the reactor. To decrease the loading effect, it is necessary to reduce the wafer temperature and pressure in the reactor, as well as increase the gas flow rate through the reactor.

  16. Model Correction Factor Method

    DEFF Research Database (Denmark)

    Christensen, Claus; Randrup-Thomsen, Søren; Morsing Johannesen, Johannes

    1997-01-01

    The model correction factor method is proposed as an alternative to traditional polynomial based response surface techniques in structural reliability considering a computationally time consuming limit state procedure as a 'black box'. The class of polynomial functions is replaced by a limit...... statebased on an idealized mechanical model to be adapted to the original limit state by the model correction factor. Reliable approximations are obtained by iterative use of gradient information on the original limit state function analogously to previous response surface approaches. However, the strength...... of the model correction factor method, is that in simpler form not using gradient information on the original limit state function or only using this information once, a drastic reduction of the number of limit state evaluation is obtained together with good approximations on the reliability. Methods...

  17. Analytical and Numerical Approaches to Modelling of Reinforcement Corrosion in Concrete

    Directory of Open Access Journals (Sweden)

    Vořechovská Dita

    2014-06-01

    Full Text Available Corrosion of reinforcement in concrete is one of the most influencing factors causing the degradation of RC structures. This paper attempts at the application of an analytical and numerical approaches to simulation of concrete cracking due to reinforcement corrosion. At first, a combination with detailed analysis of two analytical models proposed by Liu and Weyers (1998 and Li et al. (2006 is suggested and presented. Four distinct phases of the corrosion process are identified and a detailed guide through the mathematical development is described. Next, numerical computations obtained with nonlinear finite element code are presented. The model features the state-of-the-art in nonlinear fracture mechanics modelling and the heterogeneous structure of concrete is modelled via spatially varying parameters of the constitutive law. Finally, the results of the analytical studies are compared to numerical computations and the paper concludes with the sketch of a real-life numerical example.

  18. Impact analytical models for earthquake-induced pounding simulation

    Institute of Scientific and Technical Information of China (English)

    Kun YE; Li LI

    2009-01-01

    Structural pounding under earthquake has been recently extensively investigated using various impact analytical models. In this paper, a brief review on the commonly used impact analytical models is conducted.Based on this review, the formula used to determine the damping constant related to the impact spring stiffness,coefficient of restitution, and relative approaching velocity in the Hertz model with nonlinear damping is found to be incorrect. To correct this error, a more accurate approximating formula for the damping constant is theoretically derived 5~nd numerically verified. At the same time, a modified Kelvin impact model, which can reasonably account for the physical nature of pounding and conveniently implemented in the earthquake-induced pounding simulation of structural engineering is proposed.

  19. Modelling of packet traffic with matrix analytic methods

    DEFF Research Database (Denmark)

    Andersen, Allan T.

    1995-01-01

    scenario was modelled using Markovian models. The Ordinary Differential Equations arising from these models were solved numerically. The results obtained seemed very similar to those obtained using a different method in previous work by Akinpelu & Skoog 1985. Recent measurement studies of packet traffic...... process. A heuristic formula for the tail behaviour of a single server queue fed by a superposition of renewal processes has been evaluated. The evaluation was performed by applying Matrix Analytic methods. The heuristic formula has applications in the Call Admission Control (CAC) procedure of the future...... network services i.e. 800 and 900 calls and advanced mobile communication services. The Markovian Arrival Process (MAP) has been used as a versatile tool to model the packet arrival process. Applying the MAP facilitates the use of Matrix Analytic methods to obtain performance measures associated...

  20. A Factor Analytic Approach to Symptom Patterns in Dementia

    Directory of Open Access Journals (Sweden)

    Lars Gustafson

    2011-01-01

    Full Text Available Previous publications have shown a high diagnostic sensitivity and specificity of three short clinical rating scales for Alzheimer's disease (AD, frontotemporal dementia (FTD, and vascular dementia (VaD validated against neuropathological (NP diagnoses. In this study, the aim was to perform an exploratory factor analysis of the items in these clinical rating scales. The study included 190 patients with postmortem diagnoses of AD (n=74, VaD (n=33, mixed AD/VaD (n=31, or FTD (n=52. The factor analysis produced three strong factors. Factor 1 contained items describing cerebrovascular disease, similar to the Hachinski Ischemic Score. Factor 2 enclosed major clinical characteristics of FTD, and factor 3 showed a striking similarity to the AD scale. A fourth symptom cluster was described by perception and expression of emotions. The factor analyses strongly support the construct validity of the diagnostic rating scales.

  1. Analytical Models of the Intergalactic Medium and Reionization

    OpenAIRE

    Choudhury, T. Roy

    2009-01-01

    Reionization is a process whereby hydrogen (and helium) in the Universe is ionized by the radiation from first luminous sources. Theoretically, the importance of the reionization lies in its close coupling with the formation of first cosmic structures and hence there is considerable effort in modelling the process. We give a pedagogic overview of different analytical approaches used for modelling reionization. We also discuss different observations related to reionization and show how to use ...

  2. Machine Learning and Cosmological Simulations I: Semi-Analytical Models

    OpenAIRE

    Kamdar, Harshil M.; Turk, Matthew J.; Brunner, Robert J.

    2015-01-01

    We present a new exploratory framework to model galaxy formation and evolution in a hierarchical universe by using machine learning (ML). Our motivations are two-fold: (1) presenting a new, promising technique to study galaxy formation, and (2) quantitatively analyzing the extent of the influence of dark matter halo properties on galaxies in the backdrop of semi-analytical models (SAMs). We use the influential Millennium Simulation and the corresponding Munich SAM to train and test various so...

  3. Analytical modeling of bargaining solutions for multicast cellular services

    Directory of Open Access Journals (Sweden)

    Giuseppe Araniti

    2013-07-01

    Full Text Available Nowadays, the growing demand for group-oriented services over mobile devices has lead to the definition of new communication standards and multimedia applications in cellular systems. In this article we study the use of game theoretic solutions for these services to model and perform a trade-off analysis between fairness and efficiency in the resources allocation. More precisely, we model bargaining solutions for the multicast data services provisioning and introduce the analytical resolution for the proposed solutions.

  4. A Physics-based Analytical Model for Perovskite Solar Cells

    OpenAIRE

    Sun, Xingshu; Asadpour, Reza; Nie, Wanyi; Mohite, Aditya D.; Alam, Muhammad A.

    2015-01-01

    Perovskites are promising next-generation absorber materials for low-cost and high-efficiency solar cells. Although perovskite cells are configured similar to the classical solar cells, their operation is unique and requires development of a new physical model for characterization, optimization of the cells, and prediction of the panel performance. In this paper, we develop such a physics-based analytical model to describe the operation of different types of perovskite solar cells, explicitly...

  5. Factors Influencing Attitudes Towards the Use of CRM’s Analytical Tools in Organizations

    Directory of Open Access Journals (Sweden)

    Šebjan Urban

    2016-02-01

    Full Text Available Background and Purpose: Information solutions for analytical customer relationship management CRM (aCRM IS that include the use of analytical tools are becoming increasingly important, due organizations’ need for knowledge of their customers and the ability to manage big data. The objective of the research is, therefore, to determine how the organizations’ orientations (process, innovation, and technology as critical organizational factors affect the attitude towards the use of the analytical tools of aCRM IS.

  6. Pre-Analytical Parameters Affecting Vascular Endothelial Growth Factor Measurement in Plasma: Identifying Confounders.

    Directory of Open Access Journals (Sweden)

    Johanna M Walz

    Full Text Available Vascular endothelial growth factor-A (VEGF-A is intensively investigated in various medical fields. However, comparing VEGF-A measurements is difficult because sample acquisition and pre-analytic procedures differ between studies. We therefore investigated which variables act as confounders of VEGF-A measurements.Following a standardized protocol, blood was taken at three clinical sites from six healthy participants (one male and one female participant at each center twice one week apart. The following pre-analytical parameters were varied in order to analyze their impact on VEGF-A measurements: analyzing center, anticoagulant (EDTA vs. PECT / CTAD, cannula (butterfly vs. neonatal, type of centrifuge (swing-out vs. fixed-angle, time before and after centrifugation, filling level (completely filled vs. half-filled tubes and analyzing method (ELISA vs. multiplex bead array. Additionally, intrapersonal variations over time and sex differences were explored. Statistical analysis was performed using a linear regression model.The following parameters were identified as statistically significant independent confounders of VEGF-A measurements: analyzing center, anticoagulant, centrifuge, analyzing method and sex of the proband. The following parameters were no significant confounders in our data set: intrapersonal variation over one week, cannula, time before and after centrifugation and filling level of collection tubes.VEGF-A measurement results can be affected significantly by the identified pre-analytical parameters. We recommend the use of CTAD anticoagulant, a standardized type of centrifuge and one central laboratory using the same analyzing method for all samples.

  7. An Analytical Universal Model for Symmetric Double Gate Junctionless Transistors

    Directory of Open Access Journals (Sweden)

    N. Bora

    2016-06-01

    Full Text Available An analytical surface potential based universal model for the drain current voltage characteristics of Symmetric Double gate (DG junctionless field effect transistors is presented. This novel universal model is valid for all operating regions from depletion to inversion regions of operations. The primary conduction mechanism is governed by the bulk current where the channel becomes fully depleted in turning it off. This model has been validated by using TCAD device simulating software. The comparison shows high accuracy of the proposed model.

  8. ANALYTICAL CHIP FORMATION MODEL OF MICRO-END-MILLING

    Institute of Scientific and Technical Information of China (English)

    LI Chengfeng; LAI Xinmin; LI Hongtao; PENG Linfa; NI Jun

    2008-01-01

    A new analytical chip formation model is proposed for micro-end-milling operations. The model calculates an instantaneous uncut chip thickness by considering the combination of exact trochoidal trajectory of the tool tip and tool run-out, while the simplified circular trajectory and the neglected run-out create negligible change in conventional-scale chip formation models. Newton-Raphson iterative method is employed during the calculation to obtain quadratic convergence. The proposed approach allows the calculation of instantaneous uncut chip thickness to be done accurately and rapidly, and the prediction accuracy of this model is also verified by comparing the simulation results to experimental cutting forces.

  9. Analytical network-averaging of the tube model:. Rubber elasticity

    Science.gov (United States)

    Khiêm, Vu Ngoc; Itskov, Mikhail

    2016-10-01

    In this paper, a micromechanical model for rubber elasticity is proposed on the basis of analytical network-averaging of the tube model and by applying a closed-form of the Rayleigh exact distribution function for non-Gaussian chains. This closed-form is derived by considering the polymer chain as a coarse-grained model on the basis of the quantum mechanical solution for finitely extensible dumbbells (Ilg et al., 2000). The proposed model includes very few physically motivated material constants and demonstrates good agreement with experimental data on biaxial tension as well as simple shear tests.

  10. A simple stationary semi-analytical wake model

    DEFF Research Database (Denmark)

    Larsen, Gunner Chr.

    -uniform mean wind field, although the modelling of the individual stationary wake flow fields includes non-linear terms. The simulation of the individual wake contributions are based on an analytical solution of the thin shear layer approximation of the NS equations. The wake flow fields are assumed......We present an idealized simple, but fast, semi-analytical algorithm for computation of stationary wind farm wind fields with a possible potential within a multi-fidelity strategy for wind farm topology optimization. Basically, the model considers wakes as linear perturbations on the ambient non...... rotationally symmetric, and the rotor inflow fields are consistently assumed uniform. Expansion of stationary wake fields is believed to be significantly affected by meandering of wake deficits as e.g. described by the Dynamic Wake Meandering model. In the present context, this effect is approximately...

  11. A semi-analytic model of magnetized liner inertial fusion

    CERN Document Server

    McBride, Ryan D

    2015-01-01

    Presented is a semi-analytic model of magnetized liner inertial fusion (MagLIF). This model accounts for several key aspects of MagLIF, including: (1) preheat of the fuel (optionally via laser absorption); (2) pulsed-power-driven liner implosion; (3) liner compressibility with an analytic equation of state, artificial viscosity, internal magnetic pressure, and ohmic heating; (4) adiabatic compression and heating of the fuel; (5) radiative losses and fuel opacity; (6) magnetic flux compression with Nernst thermoelectric losses; (7) magnetized electron and ion thermal conduction losses; (8) end losses; (9) enhanced losses due to prescribed dopant concentrations and contaminant mix; (10) deuterium-deuterium and deuterium-tritium primary fusion reactions for arbitrary deuterium to tritium fuel ratios; and (11) magnetized alpha-particle fuel heating. We show that this simplified model, with its transparent and accessible physics, can be used to reproduce the general 1D behavior presented throughout the original Ma...

  12. Analytical modeling of large-angle CMBR anisotropies from textures

    CERN Document Server

    Magueijo, J

    1995-01-01

    We propose an analytic method for predicting the large angle CMBR temperature fluctuations induced by model textures. The model makes use of only a small number of phenomenological parameters which ought to be measured from simple simulations. We derive semi-analytically the C^l-spectrum for 2\\leq l\\leq 30 together with its associated non-Gaussian cosmic variance error bars. A slightly tilted spectrum with an extra suppression at low l is found, and we investigate the dependence of the tilt on the parameters of the model. We also produce a prediction for the two point correlation function. We find a high level of cosmic confusion between texture scenarios and standard inflationary theories in any of these quantities. However, we discover that a distinctive non-Gaussian signal ought to be expected at low l, reflecting the prominent effect of the last texture in these multipoles.

  13. Comprehensive analytical model to characterize randomness in optical waveguides.

    Science.gov (United States)

    Zhou, Junhe; Gallion, Philippe

    2016-04-01

    In this paper, the coupled mode theory (CMT) is used to derive the corresponding stochastic differential equations (SDEs) for the modal amplitude evolution inside optical waveguides with random refractive index variations. Based on the SDEs, the ordinary differential equations (ODEs) are derived to analyze the statistics of the modal amplitudes, such as the optical power and power variations as well as the power correlation coefficients between the different modal powers. These ODEs can be solved analytically and therefore, it greatly simplifies the analysis. It is demonstrated that the ODEs for the power evolution of the modes are in excellent agreement with the Marcuse' coupled power model. The higher order statistics, such as the power variations and power correlation coefficients, which are not exactly analyzed in the Marcuse' model, are discussed afterwards. Monte-Carlo simulations are performed to demonstrate the validity of the analytical model.

  14. Analytical Modeling for the Grating Eddy Current Displacement Sensors

    Directory of Open Access Journals (Sweden)

    Lv Chunfeng

    2015-02-01

    Full Text Available As a new type of displacement sensor, grating eddy current displacement sensor (GECDS combines traditional eddy current sensors and grating structure in one. The GECDS performs a wide range displacement measurement without precision reduction. This paper proposes an analytical modeling approach for the GECDS. The solution model is established in the Cartesian coordinate system, and the solving domain is limited to finite extents by using the truncated region eigenfunction expansion method. Based on the second order vector potential, expressions for the electromagnetic field as well as coil impedance related to the displacement can be expressed in closed-form. Theoretical results are then confirmed by experiments, which prove the suitability and effectiveness of the analytical modeling approach.

  15. Roll levelling semi-analytical model for process optimization

    Science.gov (United States)

    Silvestre, E.; Garcia, D.; Galdos, L.; Saenz de Argandoña, E.; Mendiguren, J.

    2016-08-01

    Roll levelling is a primary manufacturing process used to remove residual stresses and imperfections of metal strips in order to make them suitable for subsequent forming operations. In the last years the importance of this process has been evidenced with the apparition of Ultra High Strength Steels with strength > 900 MPa. The optimal setting of the machine as well as a robust machine design has become critical for the correct processing of these materials. Finite Element Method (FEM) analysis is the widely used technique for both aspects. However, in this case, the FEM simulation times are above the admissible ones in both machine development and process optimization. In the present work, a semi-analytical model based on a discrete bending theory is presented. This model is able to calculate the critical levelling parameters i.e. force, plastification rate, residual stresses in a few seconds. First the semi-analytical model is presented. Next, some experimental industrial cases are analyzed by both the semi-analytical model and the conventional FEM model. Finally, results and computation times of both methods are compared.

  16. ADVAN-style analytical solutions for common pharmacokinetic models.

    Science.gov (United States)

    Abuhelwa, Ahmad Y; Foster, David J R; Upton, Richard N

    2015-01-01

    The analytical solutions to compartmental pharmacokinetic models are well known, but have not been presented in a form that easily allows for complex dosing regimen and changes in covariate/parameter values that may occur at discrete times within and/or between dosing intervals. Laplace transforms were used to derive ADVAN-style analytical solutions for 1, 2, and 3 compartment pharmacokinetic linear models of intravenous and first-order absorption drug administration. The equations calculate the change in drug amounts in each compartment of the model over a time interval (t; t = t2 - t1) accounting for any dose or covariate events acting in the time interval. The equations were coded in the R language and used to simulate the time-course of drug amounts in each compartment of the systems. The equations were validated against commercial software [NONMEM (Beal, Sheiner, Boeckmann, & Bauer, 2009)] output to assess their capability to handle both complex dosage regimens and the effect of changes in covariate/parameter values that may occur at discrete times within or between dosing intervals. For all tested pharmacokinetic models, the time-course of drug amounts using the ADVAN-style analytical solutions were identical to NONMEM outputs to at least four significant figures, confirming the validity of the presented equations. To our knowledge, this paper presents the ADVAN-style equations for common pharmacokinetic models in the literature for the first time. The presented ADVAN-style equations overcome obstacles to implementing the classical analytical solutions in software, and have speed advantages over solutions using differential equation solvers. The equations presented in this paper fill a gap in the pharmacokinetic literature, and it is expected that these equations will facilitate the investigation of useful open-source software for modelling pharmacokinetic data. Copyright © 2015 Elsevier Inc. All rights reserved.

  17. Analytical model of interaction of tide and river flow

    Directory of Open Access Journals (Sweden)

    Phairot Chatanantavet

    2006-11-01

    Full Text Available Hydrodynamic characteristics of a river resulting from interaction of tide and river flow are important since problems regarding flood, salinity intrusion, water quality and sedimentation are ubiquitous. The lower reach of the river strongly influenced by tides from the sea, when interacting with river flows, results in a complicated pattern which is simplified to its interaction with four main constituents of tides obtained from harmonic analysis. An analytical model is developed in this study for simulating the hydrodynamic processes in estuarine waters, with the emphasis being given to the interaction between tides and river flows. The perturbation method is used to derive the analytical solution, in which the estuarine flow is separated into steady and unsteady components. Thus the analytical solutions derived consist of two distinct parts; one represents the influence of river flows and the other represents the influence of tides. The application of the model to a case study, the Chao Phraya river, which requires a time series of discharges and loadings at the river mouth to model water quality in the Gulf of Thailand, shows that the model can beautifully and completely simulate the hydrodynamic features of tide and river flow interaction especially in the rainy season when the river discharge is high. Data of tidal discharges are scarce because of high cost of measurement especially in the lower reach of the river strongly influenced by tides from the sea. From this study of relation between tidal discharges and tides, the analytical model can compute tidal discharges from tides correctly. The results of tides and tidal flow can subsequently be used to calculate eddy viscosity and dispersion coefficient for describing salinity and water quality profiles.

  18. SINGLE PHASE ANALYTICAL MODELS FOR TERRY TURBINE NOZZLE

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Haihua; Zhang, Hongbin; Zou, Ling; O' Brien, James

    2016-11-01

    All BWR RCIC (Reactor Core Isolation Cooling) systems and PWR AFW (Auxiliary Feed Water) systems use Terry turbine, which is composed of the wheel with turbine buckets and several groups of fixed nozzles and reversing chambers inside the turbine casing. The inlet steam is accelerated through the turbine nozzle and impacts on the wheel buckets, generating work to drive the RCIC pump. As part of the efforts to understand the unexpected “self-regulating” mode of the RCIC systems in Fukushima accidents and extend BWR RCIC and PWR AFW operational range and flexibility, mechanistic models for the Terry turbine, based on Sandia National Laboratories’ original work, has been developed and implemented in the RELAP-7 code to simulate the RCIC system. RELAP-7 is a new reactor system code currently under development with the funding support from U.S. Department of Energy. The RELAP-7 code is a fully implicit code and the preconditioned Jacobian-free Newton-Krylov (JFNK) method is used to solve the discretized nonlinear system. This paper presents a set of analytical models for simulating the flow through the Terry turbine nozzles when inlet fluid is pure steam. The implementation of the models into RELAP-7 will be briefly discussed. In the Sandia model, the turbine bucket inlet velocity is provided according to a reduced-order model, which was obtained from a large number of CFD simulations. In this work, we propose an alternative method, using an under-expanded jet model to obtain the velocity and thermodynamic conditions for the turbine bucket inlet. The models include both adiabatic expansion process inside the nozzle and free expansion process out of the nozzle to reach the ambient pressure. The combined models are able to predict the steam mass flow rate and supersonic velocity to the Terry turbine bucket entrance, which are the necessary input conditions for the Terry Turbine rotor model. The nozzle analytical models were validated with experimental data and

  19. Analytical Model for Fictitious Crack Propagation in Concrete Beams

    DEFF Research Database (Denmark)

    Ulfkjær, J. P.; Krenk, S.; Brincker, Rune

    -displacement curve where the fictitious crack starts to develope, and the point where the real crack starts to grow will always correspond to the same bending moment. Closed from solutions for the maximum size of the fracture zone and the minimum slope on the load-displacement curve is given. The latter result......An analytical model for load-displacement curves of unreinforced notched and un-notched concrete beams is presented. The load displacement-curve is obtained by combining two simple models. The fracture is modelled by a fictitious crack in an elastic layer around the mid-section of the beam. Outside...

  20. Analytical Modelling of a Plucked Piezoelectric Bimorph for Energy Harvesting

    CERN Document Server

    Pozzi, Michele

    2012-01-01

    Energy harvesting (EH) is a multidisciplinary research area, involving physics, materials science and engineering, with the objective of providing renewable sources of sufficient power to operate targeted low-power applications. Piezoelectric transducers are often used for vibrational, inertial and direct movement EH. One problem is that, due to the stiffness of the most common material (PZT) and typically useful sizes, intrinsic resonant frequencies are normally high, whereas the available power is often concentrated at low frequencies. The aim of the plucking technique of frequency up-conversion, also known as "pizzicato" excitation, is to bridge this frequency gap. In this paper, the technique is modelled analytically. The analytical model is developed starting from the Euler-Bernoulli beam equations modified for piezoelectric coupling. A system of differential equations and associated initial conditions are derived which describe the free vibration of a piezoelectric bimorph in the last part of the plucki...

  1. Analytical model for liquid rocket propellant feedline dynamics

    Science.gov (United States)

    Holster, J. L.; Astleford, W. J.

    1974-01-01

    A generalized analytical model and computer program have been developed to predict the frequency response of arbitrary liquid propellant feedline designs. The analytical model is based on an extension of an existing distributed parameter representation of a viscous fluid transmission line with laminar flow which was modified to include the effects of a turbulent mean flow. The effects of dissolved ullage gases, wall elasticity, localized gas or vapor bubbles, bellows, forced changes in length due to structural excitation, complex side branches, and structural mounting stiffness are also included. Each line component is written as a four-terminal, pressure-flow relationship in matrix form in the Laplace domain; the transfer function relating the pressure response at the line terminal (inducer inlet) to the external excitation is obtained in the computer program by sequential matrix substitution.

  2. Wake redirection: comparison of analytical, numerical and experimental models

    Science.gov (United States)

    Wang, Jiangang; Bottasso, Carlo L.; Campagnolo, Filippo

    2016-09-01

    This paper focuses on wake redirection techniques for wind farm control. Two control strategies are investigated: yaw misalignment and cyclic pitch control. First, analytical formulas are derived for both techniques, with the goal of providing a simple physical interpretation of the behavior of the two methods. Next, more realistic results are obtained by numerical simulations performed with CFD and by experiments conducted with scaled wind turbine models operating in a boundary layer wind tunnel. Comparing the analytical, numerical and experimental models allows for a cross-validation of the results and a better understanding of the two wake redirection techniques. Results indicate that yaw misalignment is more effective than cyclic pitch control in displacing the wake laterally, although the latter may have positive effects on wake recovery.

  3. Human performance modeling for system of systems analytics.

    Energy Technology Data Exchange (ETDEWEB)

    Dixon, Kevin R.; Lawton, Craig R.; Basilico, Justin Derrick; Longsine, Dennis E. (INTERA, Inc., Austin, TX); Forsythe, James Chris; Gauthier, John Henry; Le, Hai D.

    2008-10-01

    A Laboratory-Directed Research and Development project was initiated in 2005 to investigate Human Performance Modeling in a System of Systems analytic environment. SAND2006-6569 and SAND2006-7911 document interim results from this effort; this report documents the final results. The problem is difficult because of the number of humans involved in a System of Systems environment and the generally poorly defined nature of the tasks that each human must perform. A two-pronged strategy was followed: one prong was to develop human models using a probability-based method similar to that first developed for relatively well-understood probability based performance modeling; another prong was to investigate more state-of-art human cognition models. The probability-based modeling resulted in a comprehensive addition of human-modeling capability to the existing SoSAT computer program. The cognitive modeling resulted in an increased understanding of what is necessary to incorporate cognition-based models to a System of Systems analytic environment.

  4. An Analytic Model of Galactic Winds and Mass Outflows

    Institute of Scientific and Technical Information of China (English)

    Cheng-Gang Shu; Hou-Jun Mo; Shu-De Mao

    2005-01-01

    Galactic winds and mass outflows are observed both in nearby starburst galaxies and in high-redshift star-forming galaxies. We develop a simple analytic model to understand the observed superwind phenomenon with a discussion of the model uncertainties. Our model is built upon the model of McKee & Ostriker for the interstellar medium. It allows one to predict how properties of a superwind,such as wind velocity and mass outflow rate, are related to properties of its star forming host galaxy, such as size, gas density and star formation rate. The model predicts a threshold of star formation rate density for the generation of observable galactic winds. Galaxies with more concentrated star formation activities produce superwinds with higher velocities. The predicted mass outflow rates are compara ble to (or slightly larger than) the corresponding star formation rates. We apply our model to both local starburst galaxies and high-redshift Lyman break galaxies, and find its predictions to be in good agreement with current observations. Our model is simple and so can be easily incorporated into numerical simulations and semi-analytical models of galaxy formation.

  5. Mechanistic analytical models for long-distance seed dispersal by wind.

    Science.gov (United States)

    Katul, G G; Porporato, A; Nathan, R; Siqueira, M; Soons, M B; Poggi, D; Horn, H S; Levin, S A

    2005-09-01

    We introduce an analytical model, the Wald analytical long-distance dispersal (WALD) model, for estimating dispersal kernels of wind-dispersed seeds and their escape probability from the canopy. The model is based on simplifications to well-established three-dimensional Lagrangian stochastic approaches for turbulent scalar transport resulting in a two-parameter Wald (or inverse Gaussian) distribution. Unlike commonly used phenomenological models, WALD's parameters can be estimated from the key factors affecting wind dispersal--wind statistics, seed release height, and seed terminal velocity--determined independently of dispersal data. WALD's asymptotic power-law tail has an exponent of -3/2, a limiting value verified by a meta-analysis for a wide variety of measured dispersal kernels and larger than the exponent of the bivariate Student t-test (2Dt). We tested WALD using three dispersal data sets on forest trees, heathland shrubs, and grassland forbs and compared WALD's performance with that of other analytical mechanistic models (revised versions of the tilted Gaussian Plume model and the advection-diffusion equation), revealing fairest agreement between WALD predictions and measurements. Analytical mechanistic models, such as WALD, combine the advantages of simplicity and mechanistic understanding and are valuable tools for modeling large-scale, long-term plant population dynamics.

  6. Complex analysis of Askaryan radiation: A fully analytic treatment including the LPM effect and Cascade Form Factor

    Science.gov (United States)

    Hanson, Jordan C.; Connolly, Amy L.

    2017-05-01

    The Askaryan effect describes coherent electromagnetic radiation from high-energy cascades in dense media with a collective charge. We present an analytic model of Askaryan radiation that accounts simultaneously for the three-dimensional form factor of the cascade, and quantum mechanical cascade elongation via the Landau-Pomeranchuk-Migdal effect. These calculations, and the associated open-source code, allow the user to avoid computationally intensive Monte Carlo cascade simulations. Searches for cosmogenic neutrinos in Askaryan-based detectors benefit from computational speed, because scans of Askaryan parameter-space are required to match neutrino signals. The Askaryan field is derived from cascade equations verified with Geant4 simulations, and compared with prior numerical and semi-analytic calculations. Finally, instructive cases of the model are transformed from the Fourier domain to the time-domain. Next-generation in situ detectors like ARA and ARIANNA can use analytic time-domain signal models to search for correlations with event candidates.

  7. Synthesis and Analytical Centrifugation of Magnetic Model Colloids

    OpenAIRE

    Luigjes, B.

    2012-01-01

    This thesis is a study of the preparation and thermodynamic properties of magnetic colloids. First, two types of magnetic model colloids are investigated: composite colloids and single-domain nanoparticles. Thermodynamics of magnetic colloids is studied using analytical centrifugation, including a specially adapted centrifuge for measuring heavy and strongly light absorbing colloids. Magnetic composite colloids can be prepared from thermodynamically stable Pickering emulsions of 3-methacrylox...

  8. An Analytical Model of Joule Heating in Piezoresistive Microcantilevers

    OpenAIRE

    Chongdu Cho; Mohd Zahid Ansari

    2010-01-01

    The present study investigates Joule heating in piezoresistive microcantilever sensors. Joule heating and thermal deflections are a major source of noise in such sensors. This work uses analytical and numerical techniques to characterise the Joule heating in 4-layer piezoresistive microcantilevers made of silicon and silicon dioxide substrates but with the same U-shaped silicon piezoresistor. A theoretical model for predicting the temperature generated due to Joule heating is developed. The c...

  9. Progress on Analytical Modeling of Coherent Electron Cooling

    Energy Technology Data Exchange (ETDEWEB)

    Wang, G.; Blaskiewicz, M.; Litvinenko, V.; Webb, S.

    2010-05-23

    We report recent progresses on analytical studies of Coherent Electron Cooling. The phase space electron beam distribution obtained from the 1D FEL amplifier is applied to an infinite electron plasma model and the electron density evolution inside the kicker is derived. We also investigate the velocity modulation in the modulator and obtain a closed form solution for the current density evolution for infinite homogeneous electron plasma.

  10. Analytic variance estimates of Swank and Fano factors.

    Science.gov (United States)

    Gutierrez, Benjamin; Badano, Aldo; Samuelson, Frank

    2014-07-01

    Variance estimates for detector energy resolution metrics can be used as stopping criteria in Monte Carlo simulations for the purpose of ensuring a small uncertainty of those metrics and for the design of variance reduction techniques. The authors derive an estimate for the variance of two energy resolution metrics, the Swank factor and the Fano factor, in terms of statistical moments that can be accumulated without significant computational overhead. The authors examine the accuracy of these two estimators and demonstrate how the estimates of the coefficient of variation of the Swank and Fano factors behave with data from a Monte Carlo simulation of an indirect x-ray imaging detector. The authors' analyses suggest that the accuracy of their variance estimators is appropriate for estimating the actual variances of the Swank and Fano factors for a variety of distributions of detector outputs. The variance estimators derived in this work provide a computationally convenient way to estimate the error or coefficient of variation of the Swank and Fano factors during Monte Carlo simulations of radiation imaging systems.

  11. Analytic variance estimates of Swank and Fano factors

    Energy Technology Data Exchange (ETDEWEB)

    Gutierrez, Benjamin; Badano, Aldo; Samuelson, Frank, E-mail: frank.samuelson@fda.hhs.gov [US Food and Drug Administration, Silver Spring, Maryland 20993 (United States)

    2014-07-15

    Purpose: Variance estimates for detector energy resolution metrics can be used as stopping criteria in Monte Carlo simulations for the purpose of ensuring a small uncertainty of those metrics and for the design of variance reduction techniques. Methods: The authors derive an estimate for the variance of two energy resolution metrics, the Swank factor and the Fano factor, in terms of statistical moments that can be accumulated without significant computational overhead. The authors examine the accuracy of these two estimators and demonstrate how the estimates of the coefficient of variation of the Swank and Fano factors behave with data from a Monte Carlo simulation of an indirect x-ray imaging detector. Results: The authors' analyses suggest that the accuracy of their variance estimators is appropriate for estimating the actual variances of the Swank and Fano factors for a variety of distributions of detector outputs. Conclusions: The variance estimators derived in this work provide a computationally convenient way to estimate the error or coefficient of variation of the Swank and Fano factors during Monte Carlo simulations of radiation imaging systems.

  12. An analytical thermohydraulic model for discretely fractured geothermal reservoirs

    Science.gov (United States)

    Fox, Don B.; Koch, Donald L.; Tester, Jefferson W.

    2016-09-01

    In discretely fractured reservoirs such as those found in Enhanced/Engineered Geothermal Systems (EGS), knowledge of the fracture network is important in understanding the thermal hydraulics, i.e., how the fluid flows and the resulting temporal evolution of the subsurface temperature. The purpose of this study was to develop an analytical model of the fluid flow and heat transport in a discretely fractured network that can be used for a wide range of modeling applications and serve as an alternative analysis tool to more computationally intensive numerical codes. Given the connectivity and structure of a fracture network, the flow in the system was solved using a linear system of algebraic equations for the pressure at the nodes of the network. With the flow determined, the temperature in the fracture was solved by coupling convective heat transport in the fracture with one-dimensional heat conduction perpendicular to the fracture, employing the Green's function derived solution for a single discrete fracture. The predicted temperatures along the fracture surfaces from the analytical solution were compared to numerical simulations using the TOUGH2 reservoir code. Through two case studies, we showed the capabilities of the analytical model and explored the effect of uncertainty in the fracture apertures and network structure on thermal performance. While both sources of uncertainty independently produce large variations in production temperature, uncertainty in the network structure, whenever present, had a predominant influence on thermal performance.

  13. Factor- Analytic Study of Performance on the Bender-Gestalt

    Science.gov (United States)

    Haynes, Jack R.

    1970-01-01

    College students were given the 16 Personality Factor Questionnaire, the Guilford Zimmerman Spatial Orientation and Spatial Visualization Tests, and the Bender Gestalt. Analyses revealed that personality characteristics were related to Bender performance and that the Bender was not measuring a unitary dimension of behavior. (Author)

  14. A Factor Analytic Study of the Teaching Events Stress Inventory.

    Science.gov (United States)

    Alexander, Livingston; And Others

    The purpose of this study was to determine if definitive factors emerge from the responses of teachers to the Teaching Events Stress Inventory (TESI). In a series of three studies during the years 1980 to 1982, data were collected to assess the levels and sources of stress experienced by 660 teachers in central and western Kentucky. The subjects…

  15. A Factor Analytic Study of Inductive Reasoning Tests.

    Science.gov (United States)

    Ross, G. Robert

    A set of eight widely used inductive reasoning tests were investigated to determine whether or not they have different factorial structures. The eight inductive tests and three deductive tests, taken from the French Kit of Reference Tests for Cognitive Factors and the Watson-Glaser Critical Thinking Appraisal, were administered to 157 high school…

  16. A Factor Analytic Study of the Internet Usage Scale

    Science.gov (United States)

    Monetti, David M.; Whatley, Mark A.; Hinkle, Kerry T.; Cunningham, Kerry T.; Breneiser, Jennifer E.; Kisling, Rhea

    2011-01-01

    This study developed an Internet Usage Scale (IUS) for use with adolescent populations. The IUS is a 26-item scale that measures participants' beliefs about how their Internet usage impacts their behavior. The sample for this study consisted of 947 middle school students. An exploratory factor analysis with varimax rotation was conducted on the…

  17. An Analytic Model for Buoyancy Resonances in Protoplanetary Disks

    CERN Document Server

    Lubow, Stephen H

    2014-01-01

    Zhu, Stone, and Rafikov (2012) found in 3D shearing box simulations a new form of planet-disk interaction that they attributed to a vertical buoyancy resonance in the disk. We describe an analytic linear model for this interaction. We adopt a simplified model involving azimuthal forcing that produces the resonance and permits an analytic description of its structure. We derive an analytic expression for the buoyancy torque and show that the vertical torque distribution agrees well with results of Athena simulations and a Fourier method for linear numerical calculations carried out with the same forcing. The buoyancy resonance differs from the classic Lindblad and corotation resonances in that the resonance lies along tilted planes. Its width depends on damping effects and is independent of the gas sound speed. The resonance does not excite propagating waves. At a given large azimuthal wavenumber k_y > 1/h (for disk thickness h), the buoyancy resonance exerts a torque over a region that lies radially closer to...

  18. Collisionless magnetic reconnection: analytical model and PIC simulation comparison

    Directory of Open Access Journals (Sweden)

    V. Semenov

    2009-03-01

    Full Text Available Magnetic reconnection is believed to be responsible for various explosive processes in the space plasma including magnetospheric substorms. The Hall effect is proved to play a key role in the reconnection process. An analytical model of steady-state magnetic reconnection in a collisionless incompressible plasma is developed using the electron Hall MHD approximation. It is shown that the initial complicated system of equations may split into a system of independent equations, and the solution of the problem is based on the Grad-Shafranov equation for the magnetic potential. The results of the analytical study are further compared with a two-dimensional particle-in-cell simulation of reconnection. It is shown that both methods demonstrate a close agreement in the electron current and the magnetic and electric field structures obtained. The spatial scales of the acceleration region in the simulation and the analytical study are of the same order. Such features like particles trajectories and the in-plane electric field structure appear essentially similar in both models.

  19. HTS axial flux induction motor with analytic and FEA modeling

    Energy Technology Data Exchange (ETDEWEB)

    Li, S., E-mail: alexlee.zn@gmail.com; Fan, Y.; Fang, J.; Qin, W.; Lv, G.; Li, J.H.

    2013-11-15

    Highlights: •A high temperature superconductor axial flux induction motor and a novel maglev scheme are presented. •Analytic method and finite element method have been adopted to model the motor and to calculate the force. •Magnetic field distribution in HTS coil is calculated by analytic method. •An effective method to improve the critical current of HTS coil is presented. •AC losses of HTS coils in the HTS axial flux induction motor are estimated and tested. -- Abstract: This paper presents a high-temperature superconductor (HTS) axial-flux induction motor, which can output levitation force and torque simultaneously. In order to analyze the character of the force, analytic method and finite element method are adopted to model the motor. To make sure the HTS can carry sufficiently large current and work well, the magnetic field distribution in HTS coil is calculated. An effective method to improve the critical current of HTS coil is presented. Then, AC losses in HTS windings in the motor are estimated and tested.

  20. Model and Analytic Processes for Export License Assessments

    Energy Technology Data Exchange (ETDEWEB)

    Thompson, Sandra E.; Whitney, Paul D.; Weimar, Mark R.; Wood, Thomas W.; Daly, Don S.; Brothers, Alan J.; Sanfilippo, Antonio P.; Cook, Diane; Holder, Larry

    2011-09-29

    This paper represents the Department of Energy Office of Nonproliferation Research and Development (NA-22) Simulations, Algorithms and Modeling (SAM) Program's first effort to identify and frame analytical methods and tools to aid export control professionals in effectively predicting proliferation intent; a complex, multi-step and multi-agency process. The report focuses on analytical modeling methodologies that alone, or combined, may improve the proliferation export control license approval process. It is a follow-up to an earlier paper describing information sources and environments related to international nuclear technology transfer. This report describes the decision criteria used to evaluate modeling techniques and tools to determine which approaches will be investigated during the final 2 years of the project. The report also details the motivation for why new modeling techniques and tools are needed. The analytical modeling methodologies will enable analysts to evaluate the information environment for relevance to detecting proliferation intent, with specific focus on assessing risks associated with transferring dual-use technologies. Dual-use technologies can be used in both weapons and commercial enterprises. A decision-framework was developed to evaluate which of the different analytical modeling methodologies would be most appropriate conditional on the uniqueness of the approach, data availability, laboratory capabilities, relevance to NA-22 and Office of Arms Control and Nonproliferation (NA-24) research needs and the impact if successful. Modeling methodologies were divided into whether they could help micro-level assessments (e.g., help improve individual license assessments) or macro-level assessment. Macro-level assessment focuses on suppliers, technology, consumers, economies, and proliferation context. Macro-level assessment technologies scored higher in the area of uniqueness because less work has been done at the macro level. An

  1. Analytical properties of a three-compartmental dynamical demographic model

    Science.gov (United States)

    Postnikov, E. B.

    2015-07-01

    The three-compartmental demographic model by Korotaeyv-Malkov-Khaltourina, connecting population size, economic surplus, and education level, is considered from the point of view of dynamical systems theory. It is shown that there exist two integrals of motion, which enables the system to be reduced to one nonlinear ordinary differential equation. The study of its structure provides analytical criteria for the dominance ranges of the dynamics of Malthus and Kremer. Additionally, the particular ranges of parameters enable the derived general ordinary differential equations to be reduced to the models of Gompertz and Thoularis-Wallace.

  2. Gas Atomization of Aluminium Melts: Comparison of Analytical Models

    Directory of Open Access Journals (Sweden)

    Georgios Antipas

    2012-06-01

    Full Text Available A number of analytical models predicting the size distribution of particles during atomization of Al-based alloys by N2, He and Ar gases were compared. Simulations of liquid break up in a close coupled atomizer revealed that the finer particles are located near the center of the spray cone. Increasing gas injection pressures led to an overall reduction of particle diameters and caused a migration of the larger powder particles towards the outer boundary of the flow. At sufficiently high gas pressures the spray became monodisperse. The models also indicated that there is a minimum achievable mean diameter for any melt/gas system.

  3. Analytical Heat Transfer Modeling of a New Radiation Calorimeter

    CERN Document Server

    Ndong, Elysée Obame; Aitken, Frédéric

    2016-01-01

    This paper deals with an analytical modeling of heat transfers simulating a new radiation calorimeter operating in a temperature range from -50 {\\deg}C to 150 {\\deg}C. The aim of this modeling is the evaluation of the feasibility and performance of the calorimeter by assessing the measurement of power losses of some electrical devices by radiation, the influence of the geometry and materials. Finally a theoretical sensibility of the new apparatus is estimated at ~1 mW. From these results the calorimeter has been successfully implemented and patented.

  4. Analytical & Numerical Modelings of Elliptical Superconducting Filament Magnetization

    CERN Document Server

    Bottura, L; Bouillault, F; Devred, Arnaud

    2005-01-01

    This paper deals with the two-dimensional computation of magnetization in an elliptic superconducting filament by using numerical and analytical methods. The numerical results are obtained from the finite element method and by using Bean's model. This model is well adapted for Low Tc superconductor studies. We observe the effect of the axis ratio and of the field angle to the magnetic moment per unit length at saturation, and also to the cycle of magnetization. Moreover, the current density and the distribution of the electromagnetic fields in the superconducting filament are also studied.

  5. Analytical models of optical response in one-dimensional semiconductors

    Energy Technology Data Exchange (ETDEWEB)

    Pedersen, Thomas Garm, E-mail: tgp@nano.aau.dk

    2015-09-04

    The quantum mechanical description of the optical properties of crystalline materials typically requires extensive numerical computation. Including excitonic and non-perturbative field effects adds to the complexity. In one dimension, however, the analysis simplifies and optical spectra can be computed exactly. In this paper, we apply the Wannier exciton formalism to derive analytical expressions for the optical response in four cases of increasing complexity. Thus, we start from free carriers and, in turn, switch on electrostatic fields and electron–hole attraction and, finally, analyze the combined influence of these effects. In addition, the optical response of impurity-localized excitons is discussed. - Highlights: • Optical response of one-dimensional semiconductors including excitons. • Analytical model of excitonic Franz–Keldysh effect. • Computation of optical response of impurity-localized excitons.

  6. An analytical model of a longitudinal-torsional ultrasonic transducer

    Science.gov (United States)

    Al-Budairi, Hassan; Lucas, Margaret

    2012-08-01

    The combination of longitudinal and torsional (LT) vibrations at high frequencies finds many applications such as ultrasonic drilling, ultrasonic welding, and ultrasonic motors. The LT mode can be obtained by modifications to the design of a standard bolted Langevin ultrasonic transducer driven by an axially poled piezoceramic stack, by a technique that degenerates the longitudinal mode to an LT motion by a geometrical alteration of the wave path. The transducer design is developed and optimised through numerical modelling which can represent the geometry and mechanical properties of the transducer and its vibration response to an electrical input applied across the piezoceramic stack. However, although these models can allow accurate descriptions of the mechanical behaviour, they do not generally provide adequate insights into the electrical characteristics of the transducer. In this work, an analytical model is developed to present the LT transducer based on the equivalent circuit method. This model can represent both the mechanical and electrical aspects and is used to extract many of the design parameters, such as resonance and anti-resonance frequencies, the impedance spectra and the coupling coefficient of the transducer. The validity of the analytical model is demonstrated by close agreement with experimental results.

  7. Measurement and correlates of internalized homophobia: a factor analytic study.

    Science.gov (United States)

    Ross, M W; Rosser, B R

    1996-01-01

    We developed a scale to measure internalized homophobia in men who have sex with men, which is comprised of items derived from theoretical and clinical reports of internalized homophobia. Two hundred two men who have sex with men and who attend "Man to Man" sexual health seminars in a midwestern U.S. city completed the scale at baseline. Orthogonal factor analysis revealed four dimensions of internalized homophobia: public identification as gay, perception of stigma associated with being homosexual, social comfort with gay men, and the moral and religious acceptability of being gay. Factor scoring of these dimensions indicated that they were associated significantly with relationship satisfaction, duration of longest relationship, extent of attraction to men and women, proportion of social time with gay people, membership of gay/bisexual groups, HIV serostatus, and disclosure of sexual orientation. Internalized homophobia is measurable and consists of four dimensions that are associated significantly with low disclosure, shorter length of and satisfaction with relationships, lower degree of sexual attraction to men and higher degree of attraction to women, and lower social time with gay people.

  8. A two-dimensional analytical model of petroleum vapor intrusion

    Science.gov (United States)

    Yao, Yijun; Verginelli, Iason; Suuberg, Eric M.

    2016-02-01

    In this study we present an analytical solution of a two-dimensional petroleum vapor intrusion model, which incorporates a steady-state diffusion-dominated vapor transport in a homogeneous soil and piecewise first-order aerobic biodegradation limited by oxygen availability. This new model can help practitioners to easily generate two-dimensional soil gas concentration profiles for both hydrocarbons and oxygen and estimate hydrocarbon indoor air concentrations as a function of site-specific conditions such as source strength and depth, reaction rate constant, soil characteristics and building features. The soil gas concentration profiles generated by this new model are shown in good agreement with three-dimensional numerical simulations and two-dimensional measured soil gas data from a field study. This implies that for cases involving diffusion dominated soil gas transport, steady state conditions and homogenous source and soil, this analytical model can be used as a fast and easy-to-use risk screening tool by replicating the results of 3-D numerical simulations but with much less computational effort.

  9. A semi-analytic model of magnetized liner inertial fusion

    Science.gov (United States)

    McBride, Ryan D.; Slutz, Stephen A.

    2015-05-01

    Presented is a semi-analytic model of magnetized liner inertial fusion (MagLIF). This model accounts for several key aspects of MagLIF, including: (1) preheat of the fuel (optionally via laser absorption); (2) pulsed-power-driven liner implosion; (3) liner compressibility with an analytic equation of state, artificial viscosity, internal magnetic pressure, and ohmic heating; (4) adiabatic compression and heating of the fuel; (5) radiative losses and fuel opacity; (6) magnetic flux compression with Nernst thermoelectric losses; (7) magnetized electron and ion thermal conduction losses; (8) end losses; (9) enhanced losses due to prescribed dopant concentrations and contaminant mix; (10) deuterium-deuterium and deuterium-tritium primary fusion reactions for arbitrary deuterium to tritium fuel ratios; and (11) magnetized α-particle fuel heating. We show that this simplified model, with its transparent and accessible physics, can be used to reproduce the general 1D behavior presented throughout the original MagLIF paper [S. A. Slutz et al., Phys. Plasmas 17, 056303 (2010)]. We also discuss some important physics insights gained as a result of developing this model, such as the dependence of radiative loss rates on the radial fraction of the fuel that is preheated.

  10. A semi-analytic model of magnetized liner inertial fusion

    Energy Technology Data Exchange (ETDEWEB)

    McBride, Ryan D.; Slutz, Stephen A. [Sandia National Laboratories, Albuquerque, New Mexico 87185 (United States)

    2015-05-15

    Presented is a semi-analytic model of magnetized liner inertial fusion (MagLIF). This model accounts for several key aspects of MagLIF, including: (1) preheat of the fuel (optionally via laser absorption); (2) pulsed-power-driven liner implosion; (3) liner compressibility with an analytic equation of state, artificial viscosity, internal magnetic pressure, and ohmic heating; (4) adiabatic compression and heating of the fuel; (5) radiative losses and fuel opacity; (6) magnetic flux compression with Nernst thermoelectric losses; (7) magnetized electron and ion thermal conduction losses; (8) end losses; (9) enhanced losses due to prescribed dopant concentrations and contaminant mix; (10) deuterium-deuterium and deuterium-tritium primary fusion reactions for arbitrary deuterium to tritium fuel ratios; and (11) magnetized α-particle fuel heating. We show that this simplified model, with its transparent and accessible physics, can be used to reproduce the general 1D behavior presented throughout the original MagLIF paper [S. A. Slutz et al., Phys. Plasmas 17, 056303 (2010)]. We also discuss some important physics insights gained as a result of developing this model, such as the dependence of radiative loss rates on the radial fraction of the fuel that is preheated.

  11. Comparison between analytical and numerical solution of mathematical drying model

    Science.gov (United States)

    Shahari, N.; Rasmani, K.; Jamil, N.

    2016-02-01

    Drying is often related to the food industry as a process of shifting heat and mass inside food, which helps in preserving food. Previous research using a mass transfer equation showed that the results were mostly concerned with the comparison between the simulation model and the experimental data. In this paper, the finite difference method was used to solve a mass equation during drying using different kinds of boundary condition, which are equilibrium and convective boundary conditions. The results of these two models provide a comparison between the analytical and the numerical solution. The result shows a close match between the two solution curves. It is concluded that the two proposed models produce an accurate solution to describe the moisture distribution content during the drying process. This analysis indicates that we have confidence in the behaviour of moisture in the numerical simulation. This result demonstrated that a combined analytical and numerical approach prove that the system is behaving physically. Based on this assumption, the model of mass transfer was extended to include the temperature transfer, and the result shows a similar trend to those presented in the simpler case.

  12. Towards Analytical Modeling for Persuasive Design Choices in Mobile Apps

    Directory of Open Access Journals (Sweden)

    Hamid Mukhtar

    2016-11-01

    Full Text Available Persuasive technology has emerged as a new field of research in the past decade with its applications in various domains including web-designing, human-computer interaction, healthcare systems, and social networks. Although persuasive technology has its roots in psychology and cognitive sciences, researchers from the computing disciplines are also increasingly interested in it. Unfortunately, the existing theories, models, and frameworks for persuasive system design fall short due to absence of systematic design processes mostly used in the computing domains as well as lack of support for appropriate post-analysis. This work provides some insight into such limitations and identifies the importance of analytical modeling for persuasion in mobile applications design. The authors illustrate, using a case study, that appropriate mathematical models can be applied together with user modeling to develop a persuasive system that will allow the designer to consider several design choices simultaneously.

  13. Effective factors on optimizing banks’ balance sheet using fuzzy analytical hierarchy process

    Directory of Open Access Journals (Sweden)

    Shoja Rezaei

    2013-11-01

    Full Text Available Every bank seeks methods to optimize its assets and liabilities, thus the main subject is managing assets-liabilities in the balance sheet and the main question is by which factor banks will be enabled to have an optimized combination of assets and liabilities in a common level of risk to get the most return. This case study is dedicated to Refah bank and is an applicable study. The data has collected from the headquarter by a questionnaire and finally effective factors weight on optimizing bank balance sheet determined by using Fuzzy analytical hierarchy process. Results showed that revenue has more effect on optimizing for %39.5 and also loan to deposit ratio for %.74, regarding revenue as a symbol of efficiency in banks, it seems to be the most important factor and goal in banking industry. Furthermore banks need to have some liquidity to respond customers demand to cover one of the most important risks of banking. This factor importance determined to be %18 in Refah Bank by using model and experts view.

  14. A workflow learning model to improve geovisual analytics utility.

    Science.gov (United States)

    Roth, Robert E; Maceachren, Alan M; McCabe, Craig A

    2009-01-01

    INTRODUCTION: This paper describes the design and implementation of the G-EX Portal Learn Module, a web-based, geocollaborative application for organizing and distributing digital learning artifacts. G-EX falls into the broader context of geovisual analytics, a new research area with the goal of supporting visually-mediated reasoning about large, multivariate, spatiotemporal information. Because this information is unprecedented in amount and complexity, GIScientists are tasked with the development of new tools and techniques to make sense of it. Our research addresses the challenge of implementing these geovisual analytics tools and techniques in a useful manner. OBJECTIVES: The objective of this paper is to develop and implement a method for improving the utility of geovisual analytics software. The success of software is measured by its usability (i.e., how easy the software is to use?) and utility (i.e., how useful the software is). The usability and utility of software can be improved by refining the software, increasing user knowledge about the software, or both. It is difficult to achieve transparent usability (i.e., software that is immediately usable without training) of geovisual analytics software because of the inherent complexity of the included tools and techniques. In these situations, improving user knowledge about the software through the provision of learning artifacts is as important, if not more so, than iterative refinement of the software itself. Therefore, our approach to improving utility is focused on educating the user. METHODOLOGY: The research reported here was completed in two steps. First, we developed a model for learning about geovisual analytics software. Many existing digital learning models assist only with use of the software to complete a specific task and provide limited assistance with its actual application. To move beyond task-oriented learning about software use, we propose a process-oriented approach to learning based on

  15. Analytic Thermoelectric Couple Modeling: Variable Material Properties and Transient Operation

    Science.gov (United States)

    Mackey, Jonathan A.; Sehirlioglu, Alp; Dynys, Fred

    2015-01-01

    To gain a deeper understanding of the operation of a thermoelectric couple a set of analytic solutions have been derived for a variable material property couple and a transient couple. Using an analytic approach, as opposed to commonly used numerical techniques, results in a set of useful design guidelines. These guidelines can serve as useful starting conditions for further numerical studies, or can serve as design rules for lab built couples. The analytic modeling considers two cases and accounts for 1) material properties which vary with temperature and 2) transient operation of a couple. The variable material property case was handled by means of an asymptotic expansion, which allows for insight into the influence of temperature dependence on different material properties. The variable property work demonstrated the important fact that materials with identical average Figure of Merits can lead to different conversion efficiencies due to temperature dependence of the properties. The transient couple was investigated through a Greens function approach; several transient boundary conditions were investigated. The transient work introduces several new design considerations which are not captured by the classic steady state analysis. The work helps to assist in designing couples for optimal performance, and also helps assist in material selection.

  16. Orthogonal Higher Order Structure of the WISC-IV Spanish Using Hierarchical Exploratory Factor Analytic Procedures

    Science.gov (United States)

    McGill, Ryan J.; Canivez, Gary L.

    2016-01-01

    As recommended by Carroll, the present study examined the factor structure of the Wechsler Intelligence Scale for Children-Fourth Edition Spanish (WISC-IV Spanish) normative sample using higher order exploratory factor analytic techniques not included in the WISC-IV Spanish Technical Manual. Results indicated that the WISC-IV Spanish subtests were…

  17. Orthogonal Higher Order Structure of the WISC-IV Spanish Using Hierarchical Exploratory Factor Analytic Procedures

    Science.gov (United States)

    McGill, Ryan J.; Canivez, Gary L.

    2016-01-01

    As recommended by Carroll, the present study examined the factor structure of the Wechsler Intelligence Scale for Children-Fourth Edition Spanish (WISC-IV Spanish) normative sample using higher order exploratory factor analytic techniques not included in the WISC-IV Spanish Technical Manual. Results indicated that the WISC-IV Spanish subtests were…

  18. HTS axial flux induction motor with analytic and FEA modeling

    Science.gov (United States)

    Li, S.; Fan, Y.; Fang, J.; Qin, W.; Lv, G.; Li, J. H.

    2013-11-01

    This paper presents a high-temperature superconductor (HTS) axial-flux induction motor, which can output levitation force and torque simultaneously. In order to analyze the character of the force, analytic method and finite element method are adopted to model the motor. To make sure the HTS can carry sufficiently large current and work well, the magnetic field distribution in HTS coil is calculated. An effective method to improve the critical current of HTS coil is presented. Then, AC losses in HTS windings in the motor are estimated and tested.

  19. "Violent Intent Modeling: Incorporating Cultural Knowledge into the Analytical Process

    Energy Technology Data Exchange (ETDEWEB)

    Sanfilippo, Antonio P.; Nibbs, Faith G.

    2007-08-24

    While culture has a significant effect on the appropriate interpretation of textual data, the incorporation of cultural considerations into data transformations has not been systematic. Recognizing that the successful prevention of terrorist activities could hinge on the knowledge of the subcultures, Anthropologist and DHS intern Faith Nibbs has been addressing the need to incorporate cultural knowledge into the analytical process. In this Brown Bag she will present how cultural ideology is being used to understand how the rhetoric of group leaders influences the likelihood of their constituents to engage in violent or radicalized behavior, and how violent intent modeling can benefit from understanding that process.

  20. Analytical performance models for geologic repositories. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    Chambre, P.L.; Pigford, T.H.; Fujita, A.; Kanki, T.; Kobayashi, A.; Lung, H.; Ting, D.; Sato, Y.; Zavoshy, S.J.

    1982-10-01

    This report presents analytical solutions of the dissolution and hydrogeologic transport of radionuclides in geologic repositories. Numerical examples are presented to demonstrate the equations resulting from these analyses. The subjects treated in this report are: solubility-limited transport with transverse dispersion (chapter 2); transport of a radionuclide chain with nonequilibrium chemical reactions (chapter 3); advective transport in a two-dimensional flow field (chapter 4); radionuclide transport in fractured media (chapter 5); a mathematical model for EPA's analysis of generic repositories (chapter 6); and dissolution of radionuclides from solid waste (chapter 7). Volume 2 contains chapters 5, 6, and 7.

  1. A temporal model for Clinical Data Analytics language.

    Science.gov (United States)

    Safari, Leila; Patrick, Jon D

    2013-01-01

    The proposal of a special purpose language for Clinical Data Analytics (CliniDAL) is presented along with a general model for expressing temporal events in the language. The temporal dimension of clinical data needs to be addressed from at least five different points of view. Firstly, how to attach the knowledge of time based constraints to queries; secondly, how to mine temporal data in different CISs with various data models; thirdly, how to deal with both relative time and absolute time in the query language; fourthly, how to tackle internal time-event dependencies in queries, and finally, how to manage historical time events preserved in the patient's narrative. The temporal elements of the language are defined in Bachus Naur Form (BNF) along with a UML schema. Its use in a designed taxonomy of a five class hierarchy of data analytics tasks shows the solution to problems of time event dependencies in a highly complex cascade of queries needed to evaluate scientific experiments. The issues in using the model in a practical way are discussed as well.

  2. Analytical modeling of turbine wakes in yawed conditions

    Science.gov (United States)

    Bastankhah, Majid; Porté-Agel, Fernando

    2016-04-01

    Increasing wind energy production has become a unanimous plan for virtually all the developed countries. In addition to constructing new wind farms, this goal can be achieved by making wind farms more efficient. Control strategies in wind farms, such as manipulating the yaw angle of the turbines, have the potential to make wind farms more efficient. Costly numerical simulations or measurements cannot be, however, employed to assess the viability of this strategy in the numerous different scenarios happening in real wind farms. In this study, we aim to develop an inexpensive and simple analytical model that is able for the first time to predict the whole wake of a yawed turbine with an acceptable accuracy. The proposed analytical model is built upon the simplified version of the Reynolds-averaged Navier-Stokes equations. Apart from the ability of the model to predict wake flows in yawed conditions, it can provide a better understanding of turbine wakes in this complex situation. For example, it can give valuable insights on how the wake deflection varies by changing turbine and incoming flow characteristics, such as the thrust coefficient of the turbine or the ambient turbulence.

  3. Human Factors Model

    Science.gov (United States)

    1993-01-01

    Jack is an advanced human factors software package that provides a three dimensional model for predicting how a human will interact with a given system or environment. It can be used for a broad range of computer-aided design applications. Jack was developed by the computer Graphics Research Laboratory of the University of Pennsylvania with assistance from NASA's Johnson Space Center, Ames Research Center and the Army. It is the University's first commercial product. Jack is still used for academic purposes at the University of Pennsylvania. Commercial rights were given to Transom Technologies, Inc.

  4. Analytical modeling of sandwich beam for piezoelectric bender elements

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Piezoelectric bender elements are widely used as electromechanical sensors and actuators. An analytical sandwich beam model for piezoelectric bender elements was developed based on the first-order shear deformation theory (FSDT), which assumes a single rotation angle for the whole cross-section and a quadratic distribution function for coupled electric potential in piezoelectric layers, and corrects the effect of transverse shear strain on the electric displacement integration. Free vibration analysis of simplysupported bender elements was carried out and the numerical results showed that, solutions of the present model for various thickness-to-length ratios are compared well with the exact two-dimensional solutions, which presents an efficient and accurate model for analyzing dynamic electromechanical responses of bender elements.

  5. Analytic solution of Hubbell's model of local community dynamics

    CERN Document Server

    McKane, A; Sole, R; Kane, Alan Mc; Alonso, David; Sole, Ricard

    2003-01-01

    Recent theoretical approaches to community structure and dynamics reveal that many large-scale features of community structure (such as species-rank distributions and species-area relations) can be explained by a so-called neutral model. Using this approach, species are taken to be equivalent and trophic relations are not taken into account explicitly. Here we provide a general analytic solution to the local community model of Hubbell's neutral theory of biodiversity by recasting it as an urn model i.e.a Markovian description of states and their transitions. Both stationary and time-dependent distributions are analysed. The stationary distribution -- also called the zero-sum multinomial -- is given in closed form. An approximate form for the time-dependence is obtained by using an expansion of the master equation. The temporal evolution of the approximate distribution is shown to be a good representation for the true temporal evolution for a large range of parameter values.

  6. Thermally induced fractures: A field proven analytical model

    Energy Technology Data Exchange (ETDEWEB)

    Detienne, J.L.; Creusot, M.; Kesslar, N. [and others

    1995-12-31

    Thermally Induced Fracturing (TIF) during water injection is a well-established phenomenon. TIF modelling implies solving simultaneously equations which are dealt with separately in conventional petroleum engineering applications. Combining these equations leads to very complex computer programs. This has led to the requirement for the simple model which is presented in this paper. Coupling analytical expressions representing each of these phenomena, rather than the basic physical equations, has led to a computer program which can be run on a modem desk-top computer. This program has successfully matched the daily wellhead pressure and injection rate over a period of 3 to 5 years, for injection wells in complex sandstone/dolomite reservoirs. The model can be used for injection well monitoring as well as in a predictive mode when planning new water injection projects. The algorithm is sufficiently simple to be implemented in a conventional reservoir simulator.

  7. Analytical models for the design of the LAPLAS experiment

    Energy Technology Data Exchange (ETDEWEB)

    Piriz, A.R.; Lopez Cela, J.J.; Cortazar, O.D.; Serna Moreno, M.C.; Temporal, M. [ETSI Industriales and Instituto de Investigaciones Energeticas, Universidad de Castilla-La Mancha, 13071 Ciudad Real (Spain); Tahir, N.A. [Gesellschaft fuer Schwerionenforschung Darmstadt, Planckstrasse 1, 64291 Darmstadt (Germany); Hoffmann, D.H.H. [Gesellschaft fuer Schwerionenforschung Darmstadt, Planckstrasse 1, 64291 Darmstadt (Germany); Institut fuer Kernphysik, Technische Universitaet Darmstadt, 64289 Darmstadt (Germany)

    2007-07-01

    We review the theoretical activity at the University of Castilla-LaMancha directed to the design of the LAPLAS (Laboratory of Planetary Sciences) experiment in the framework of the HEDgeHOB international collaboration. We have developed analytical models for the different phases of LAPLAS, including models for the implosion of the cylindrical shell target, for the generation of an annular focal spot by means of a high-frequency wobbler system and for the hydrodynamic instabilities that could affect the performance of the target implosion. These models have been complemented with one and two-dimensional numerical simulations and such a combination have allowed us to have a powerful tool available for the design of the experiments as well as for the interpretation of their results. (copyright 2007 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  8. Analytic Models of Brown Dwarfs and The Substellar Mass Limit

    CERN Document Server

    Auddy, Sayantan; Valluri, S R

    2016-01-01

    We present the current status of the analytic theory of brown dwarf evolution and the lower mass limit of the hydrogen burning main sequence stars. In the spirit of a simplified analytic theory we also introduce some modifications to the existing models. We give an exact expression for the pressure of an ideal non-relativistic Fermi gas at a finite temperature, therefore allowing for non-zero values of the degeneracy parameter ($\\psi = \\frac{kT}{\\mu_{F}}$, where $\\mu_{F}$ is the Fermi energy). We review the derivation of surface luminosity using an entropy matching condition and the first-order phase transition between the molecular hydrogen in the outer envelope and the partially-ionized hydrogen in the inner region. We also discuss the results of modern simulations of the plasma phase transition, which illustrate the uncertainties in determining its critical temperature. Based on the existing models and with some simple modification we find the maximum mass for a brown dwarf to be in the range $0.064M_\\odot...

  9. A Simplified Analytical Modeling of the Hole Erosion Test

    Directory of Open Access Journals (Sweden)

    Mohammed Bezzazi

    2010-01-01

    Full Text Available Problem statement: Internal erosion occurs in soils containing fine particles under the action of high pressure gradients that could result from water discharge. This phenomenon can yield in its final stage to the formation of piping which constitutes a real threat for hydraulics infrastructures as it can precipitate their entire rupture in very short time. In order to mitigate this insidious hazard, it is important to characterize piping dynamics. In this context, the Hole Erosion Test was introduced to assess the erosive features of soils by means of two parameters, the erosion rate and the critical shear stress indicating the beginning of erosion. Modeling this test can enable to understand more comprehensibly the piping phenomenology. Approach: A simplified analytical modeling of the Hole Erosion Test was considered in this study. A closed form solution of erosion taking place during piping was derived without resorting to the habitual cumbersome developments that are needed to achieve complete solution of the rational equations describing this highly coupled problem. This was achieved by assuming formal analogy between the erosive shear stress and the friction shear that develops at a cylindrical piping wall under an axial viscous flow. The flow was assumed to be uniform along the tube. Results: A closed form analytical formula describing erosion dynamics associated to piping was derived. Theoretical predictions were compared with experimental results and the simplified model was found to predict accurately the increase of flow rate that results from piping erosion. Conclusion/Recommendations: The one-dimensional modeling that was proposed for the Hole Erosion Test under strong simplifying assumptions was found to yield the same features as those obtained in the literature by using other approaches. It gives furthermore the dynamics as function of the fluid regime existing inside the tube. In order to get further insight

  10. An analytically tractable model for community ecology with many species

    Science.gov (United States)

    Dickens, Benjamin; Fisher, Charles; Mehta, Pankaj; Pankaj Mehta Biophysics Theory Group Team

    A fundamental problem in community ecology is to understand how ecological processes such as selection, drift, and immigration yield observed patterns in species composition and diversity. Here, we present an analytically tractable, presence-absence (PA) model for community assembly and use it to ask how ecological traits such as the strength of competition, diversity in competition, and stochasticity affect species composition in a community. In our PA model, we treat species as stochastic binary variables that can either be present or absent in a community: species can immigrate into the community from a regional species pool and can go extinct due to competition and stochasticity. Despite its simplicity, the PA model reproduces the qualitative features of more complicated models of community assembly. In agreement with recent work on large, competitive Lotka-Volterra systems, the PA model exhibits distinct ecological behaviors organized around a special (``critical'') point corresponding to Hubbell's neutral theory of biodiversity. Our results suggest that the concepts of ``phases'' and phase diagrams can provide a powerful framework for thinking about community ecology and that the PA model captures the essential ecological dynamics of community assembly. Pm was supported by a Simons Investigator in the Mathematical Modeling of Living Systems and a Sloan Research Fellowship.

  11. Characterization of uniform scanning proton beams with analytical models

    Science.gov (United States)

    Demez, Nebi

    Tissue equivalent phantoms have an important place in radiation therapy planning and delivery. They have been manufactured for use in conventional radiotherapy. Their tissue equivalency for proton beams is currently in active investigation. The Bragg-Kleeman rule was used to calculate water equivalent thickness (WET) for available tissue equivalent phantoms from CIRS (Norfolk, VA, USA). WET's of those phantoms were also measured using proton beams at Hampton University Proton Therapy Institute (HUPTI). WET measurements and calculations are in good agreement within ˜1% accuracy except for high Z phantoms. Proton beams were also characterized with an analytical proton dose calculation model, Proton Loss Model (PLM) [26], to investigate protons interactions in water and those phantoms. Depth-dose and lateral dose profiles of protons in water and in those phantoms were calculated, measured, and compared. Water Equivalent Spreadness (WES) was also investigated for those phantoms using the formula for scattering power ratio. Because WES is independent of incident energy of protons, it is possible to estimate spreadness of protons in different media by just knowing WES. Measurements are usually taken for configuration of the treatment planning system (TPS). This study attempted to achieve commissioning data for uniform scanning proton planning with analytical methods, PLM, which have been verified with published measurements and Monte Carlo calculations. Depth doses and lateral profiles calculated by PLM were compared with measurements via the gamma analysis method. While gamma analysis shows that depth doses are in >90% agreement with measured depth doses, the agreement falls to <80% for some lateral profiles. PLM data were imported into the TPS (PLM-TPS). PLM-TPS was tested with different patient cases. The PLM-TPS treatment plans for 5 prostate cases show acceptable agreement. The Planning Treatment Volume (PTV) coverage was 100 % with PLM-TPS except for one case in

  12. Analytical Model for Ring Heater Thermal Compensation in Advanced LIGO

    CERN Document Server

    Ramette, Joshua; Brooks, Aidan; Blair, Carl; Wang, Haoyu; Heintze, Matthew

    2015-01-01

    Advanced laser interferometer gravitational-wave detectors use high laser power to achieve design sensitivity. A small part of this power is absorbed in the interferometer cavity mirrors where it creates thermal lenses, causing aberrations in the main laser beam that must be minimized by the actuation of "ring heaters," additional heater elements that are aimed to reduce the temperature gradients in the mirrors. In this article we derive the first analytical model of the temperature field generated by an ideal ring heater. We express the resulting optical aberration contribution to the main laser beam in this axisymmetric case. Used in conjunction with wavefront measurements, our model provides a more complete understanding of the thermal state of the cavity mirrors and will allow a more efficient use of the ring heaters in Advanced LIGO.

  13. An analytical model for pyrolysis of a single biomass particle

    Institute of Scientific and Technical Information of China (English)

    Mehdi Bidabadi; Mohammad Rastegar Moghaddam; Seyed Alireza Mostafavi; Farzad Faraji Dizaji; Hossein Beidaghy Dizaji

    2015-01-01

    Decreasing in emissions of greenhouse gases to confront the global warming needs to replace fossil fuels as the main doer of the world climate changes by renewable and clean fuels produced from biomass like wood waste which is neutral on the amount of CO2. An analytical and engineering model for pyrolysis process of a single biomass particle has been presented. Using a two-stage semi global kinetic model which includes both primary and secondary reactions, the effects of parameters like shape and size of particle as well as porosity on the particle temperature profile and product yields have been investigated. Comparison of the obtained results with experimental data shows that our results are in a reasonable agreement with previous researchers’ works. Finally, a sensitivity analysis is done to determine the importance of each parameter on pyrolysis of a single biomass particle which is affected by many constant parameters.

  14. Galacticus: A Semi-Analytic Model of Galaxy Formation

    Science.gov (United States)

    Benson, Andrew

    2011-08-01

    Galacticus is designed to solve the physics involved in the formation of galaxies within the current standard cosmological framework. It is of a type of model known as “semi-analytic” in which the numerous complex non-linear physics involved are solved using a combination of analytic approximations and empirical calibrations from more detailed, numerical solutions. Models of this type aim to begin with the initial state of the Universe (specified shortly after the Big Bang) and apply physical principles to determine the properties of galaxies in the Universe at later times, including the present day. Typical properties computed include the mass of stars and gas in each galaxy, broad structural properties (e.g. radii, rotation speeds, geometrical shape etc.), dark matter and black hole contents, and observable quantities such as luminosities, chemical composition etc.

  15. Flow harmonics within an analytically solvable viscous hydrodynamic model

    CERN Document Server

    Hatta, Yoshitaka; Torrieri, Giorgio; Xiao, Bo-Wen

    2014-01-01

    Based on a viscous hydrodynamic model with anisotropically perturbed Gubser flow and isothermal Cooper-Frye freezeout, we analytically compute the flow harmonics $v_n(p_T)$ and study how they scale with the harmonic number $n$ and transverse momentum, as well as the system size, shear and bulk viscosity coefficients, and collision energy. In particular, we find that the magnitude of shear viscous corrections grows linearly with $n$. The mixing between different harmonics is also discussed. While this model is rather simple as compared to realistic heavy-ion collisions, we argue that the scaling results presented here may be meaningfully compared to experimental data collected over many energies, system sizes, and geometries.

  16. Strong field coherent control of molecular torsions—Analytical models

    Energy Technology Data Exchange (ETDEWEB)

    Ashwell, Benjamin A.; Ramakrishna, S.; Seideman, Tamar, E-mail: t-seideman@northwestern.edu [Department of Chemistry, Northwestern University, Evanston, Illinois 60208 (United States)

    2015-08-14

    We introduce analytical models of torsional alignment by moderately intense laser pulses that are applicable to the limiting cases of the torsional barrier heights. Using these models, we explore in detail the role that the laser intensity and pulse duration play in coherent torsional dynamics, addressing both experimental and theoretical concerns. Our results suggest strategies for minimizing the risk of off-resonant ionization, noting the qualitative differences between the case of torsional alignment subject to a field-free torsional barrier and that of torsional alignment of a barrier-less system (equivalent to a 2D rigid rotor). We also investigate several interesting torsional phenomena, including the onset of impulsive alignment of torsions, field-driven oscillations in quantum number space, and the disappearance of an alignment upper bound observed for a rigid rotor in the impulsive torsional alignment limit.

  17. Analytical modelling of regional radiotherapy dose response of lung

    Science.gov (United States)

    Lee, Sangkyu; Stroian, Gabriela; Kopek, Neil; AlBahhar, Mahmood; Seuntjens, Jan; El Naqa, Issam

    2012-06-01

    Knowledge of the dose-response of radiation-induced lung disease (RILD) is necessary for optimization of radiotherapy (RT) treatment plans involving thoracic cavity irradiation. This study models the time-dependent relationship between local radiation dose and post-treatment lung tissue damage measured by computed tomography (CT) imaging. Fifty-eight follow-up diagnostic CT scans from 21 non-small-cell lung cancer patients were examined. The extent of RILD was segmented on the follow-up CT images based on the increase of physical density relative to the pre-treatment CT image. The segmented RILD was locally correlated with dose distribution calculated by analytical anisotropic algorithm and the Monte Carlo method to generate the corresponding dose-response curves. The Lyman-Kutcher-Burman (LKB) model was fit to the dose-response curves at six post-RT time periods, and temporal change in the LKB parameters was recorded. In this study, we observed significant correlation between the probability of lung tissue damage and the local dose for 96% of the follow-up studies. Dose-injury correlation at the first three months after RT was significantly different from later follow-up periods in terms of steepness and threshold dose as estimated from the LKB model. Dependence of dose response on superior-inferior tumour position was also observed. The time-dependent analytical modelling of RILD might provide better understanding of the long-term behaviour of the disease and could potentially be applied to improve inverse treatment planning optimization.

  18. Analytical Higher-Order Model for Flexible and Stretchable Sensors

    Institute of Scientific and Technical Information of China (English)

    ZHANG Yongfang; ZHU Hongbin; LIU Cheng; LIU Xu; LIU Fuxi; L Yanjun

    2015-01-01

    The stretchable sensor wrapped around a foldable airfoil or embedded inside of it has great potential for use in the monitoring of the structural status of the foldable airfoil. The design methodology is important to the development of the stretchable sensor for status monitoring on the foldable airfoil. According to the requirement of mechanical flexibility of the sensor, the combined use of a layered flexible structural formation and a strain isolation layer is implemented. An analytical higher-order model is proposed to predict the stresses of the strain-isolation layer based on the shear-lag model for the safe design of the flexible and stretchable sensors. The normal stress and shear stress equations in the constructed structure of the sensors are obtained by the proposed model. The stress distribution in the structure is investigated when bending load is applied to the structures. The numerical results show that the proposed model can predict the variation of normal stress and shear stress along the thickness of the strain-isolation (polydimethylsiloxane) layer accurately. The results by the proposed model are in good agreement with the finite element method, in which the normal stress is variable while the shear stress is invariable along the thickness direction of strain-isolation layer. The high-order model is proposed to predict the stresses of the layered structure of the flexible and stretchable sensor for monitoring the status of the foldable airfoil.

  19. Analytically tractable model for community ecology with many species

    Science.gov (United States)

    Dickens, Benjamin; Fisher, Charles K.; Mehta, Pankaj

    2016-08-01

    A fundamental problem in community ecology is understanding how ecological processes such as selection, drift, and immigration give rise to observed patterns in species composition and diversity. Here, we analyze a recently introduced, analytically tractable, presence-absence (PA) model for community assembly, and we use it to ask how ecological traits such as the strength of competition, the amount of diversity, and demographic and environmental stochasticity affect species composition in a community. In the PA model, species are treated as stochastic binary variables that can either be present or absent in a community: species can immigrate into the community from a regional species pool and can go extinct due to competition and stochasticity. Building upon previous work, we show that, despite its simplicity, the PA model reproduces the qualitative features of more complicated models of community assembly. In agreement with recent studies of large, competitive Lotka-Volterra systems, the PA model exhibits distinct ecological behaviors organized around a special ("critical") point corresponding to Hubbell's neutral theory of biodiversity. These results suggest that the concepts of ecological "phases" and phase diagrams can provide a powerful framework for thinking about community ecology, and that the PA model captures the essential ecological dynamics of community assembly.

  20. Comparison of input parameters regarding rock mass in analytical solution and numerical modelling

    Science.gov (United States)

    Yasitli, N. E.

    2016-12-01

    Characteristics of stress redistribution around a tunnel excavated in rock are of prime importance for an efficient tunnelling operation and maintaining stability. As it is a well known fact that rock mass properties are the most important factors affecting stability together with in-situ stress field and tunnel geometry. Induced stresses and resultant deformation around a tunnel can be approximated by means of analytical solutions and application of numerical modelling. However, success of these methods depends on assumptions and input parameters which must be representative for the rock mass. However, mechanical properties of intact rock can be found by laboratory testing. The aim of this paper is to demonstrate the importance of proper representation of rock mass properties as input data for analytical solution and numerical modelling. For this purpose, intact rock data were converted into rock mass data by using the Hoek-Brown failure criterion and empirical relations. Stress-deformation analyses together with yield zone thickness determination have been carried out by using analytical solutions and numerical analyses by using FLAC3D programme. Analyses results have indicated that incomplete and incorrect design causes stability and economic problems in the tunnel. For this reason during the tunnel design analytical data and rock mass data should be used together. In addition, this study was carried out to prove theoretically that numerical modelling results should be applied to the tunnel design for the stability and for the economy of the support.

  1. Decision Making in Reference to Model of Marketing Predictive Analytics – Theory and Practice

    Directory of Open Access Journals (Sweden)

    Piotr Tarka

    2014-03-01

    understand the inner working of the model. Originality: Authors describe the importance of analytics which enhance the decisions that the company makes as it executes strategies and plans, so that the company can be more effective and achieve better results. The key factor that enables to execute marketing strategies accurately and build competitive advantage in the future includes predictive modeling. The ability to predict probable futures allows us to shape the future, rather than merely survive whatever it brings.

  2. Random-Effects Models for Meta-Analytic Structural Equation Modeling: Review, Issues, and Illustrations

    Science.gov (United States)

    Cheung, Mike W.-L.; Cheung, Shu Fai

    2016-01-01

    Meta-analytic structural equation modeling (MASEM) combines the techniques of meta-analysis and structural equation modeling for the purpose of synthesizing correlation or covariance matrices and fitting structural equation models on the pooled correlation or covariance matrix. Both fixed-effects and random-effects models can be defined in MASEM.…

  3. Prioritizing the client trust factors in electronic banking using analytic hierarchy process

    Directory of Open Access Journals (Sweden)

    Hossein vazifedust

    2014-04-01

    Full Text Available This paper prioritizes the trust factors among electronic banking clients of an Iranian bank named Parsian Bank. The study first analyzes and reviews the literature and interviews with experts of electronic banking and academicians and determines client trust as the most important factor for development of electronic banking. The study also determines different factors associated with trust, which includes individual factors, banking factors and infrastructural factors. The sample populations consist of 25 experts who are academicians, managers and bank officers, clients of electronic banking. The necessary data was collected through conducting interviews and questionnaires and they are analyzed using analytic hierarchy process (AHP. The research findings indicate that the attitudinal factors, telecommunication infrastructure and cultural factors were the most influential factors accordingly and the customer orientation and ease of access were the least influential factors.

  4. Analytic model and frequency characteristics of plasma synthetic jet actuator

    Science.gov (United States)

    Zong, Hao-hua; Wu, Yun; Li, Ying-hong; Song, Hui-min; Zhang, Zhi-bo; Jia, Min

    2015-02-01

    This paper reports a novel analytic model of a plasma synthetic jet actuator (PSJA), considering both the heat transfer effect and the inertia of the throat gas. Both the whole cycle characteristics and the repetitive working process of PSJA can be predicted with this model. The frequency characteristics of a PSJA with 87 mm3 volume and different orifice diameters are investigated based on the analytic model combined with experiments. In the repetitive working mode, the actuator works initially in the transitional stage with 20 cycles and then in the dynamic balanced stage. During the transitional stage, major performance parameters of PSJA experience stepped growth, while during the dynamic balanced stage, these parameters are characterized by periodic variation. With a constant discharge energy of 6.9 mJ, there exists a saturated frequency of 4 kHz/6 kHz for an orifice diameter of 1 mm/1.5 mm, at which the time-averaged total pressure of the pulsed jet reaches a maximum. Between 0.5 mm and 1.5 mm, a larger orifice diameter leads to a higher saturated frequency due to the reduced jet duration time. As the actuation frequency increases, both the time-averaged cavity temperature and the peak jet velocity initially increase and then remain almost unchanged at 1600 K and 280 m/s, respectively. Besides, with increasing frequency, the mechanical energy incorporated in single pulsed jet, the expelled mass per pulse, and the time-averaged density in the cavity, decline in a stair stepping way, which is caused by the intermittent decrease of refresh stage duration in one period.

  5. Model choice considerations and information integration using analytical hierarchy process

    Energy Technology Data Exchange (ETDEWEB)

    Langenbrunner, James R [Los Alamos National Laboratory; Hemez, Francois M [Los Alamos National Laboratory; Booker, Jane M [BOOKER SCIENTIFIC; Ross, Timothy J. [UNM

    2010-10-15

    Using the theory of information-gap for decision-making under severe uncertainty, it has been shown that model output compared to experimental data contains irrevocable trade-offs between fidelity-to-data, robustness-to-uncertainty and confidence-in-prediction. We illustrate a strategy for information integration by gathering and aggregating all available data, knowledge, theory, experience, similar applications. Such integration of information becomes important when the physics is difficult to model, when observational data are sparse or difficult to measure, or both. To aggregate the available information, we take an inference perspective. Models are not rejected, nor wasted, but can be integrated into a final result. We show an example of information integration using Saaty's Analytic Hierarchy Process (AHP), integrating theory, simulation output and experimental data. We used expert elicitation to determine weights for two models and two experimental data sets, by forming pair-wise comparisons between model output and experimental data. In this way we transform epistemic and/or statistical strength from one field of study into another branch of physical application. The price to pay for utilizing all available knowledge is that inferences drawn for the integrated information must be accounted for and the costs can be considerable. Focusing on inferences and inference uncertainty (IU) is one way to understand complex information.

  6. Star formation in Herschel's Monsters versus semi-analytic models

    Science.gov (United States)

    Gruppioni, C.; Calura, F.; Pozzi, F.; Delvecchio, I.; Berta, S.; De Lucia, G.; Fontanot, F.; Franceschini, A.; Marchetti, L.; Menci, N.; Monaco, P.; Vaccari, M.

    2015-08-01

    We present a direct comparison between the observed star formation rate functions (SFRFs) and the state-of-the-art predictions of semi-analytic models (SAMs) of galaxy formation and evolution. We use the PACS Evolutionary Probe Survey and Herschel Multi-tiered Extragalactic Survey data sets in the COSMOS and GOODS-South fields, combined with broad-band photometry from UV to sub-mm, to obtain total (IR+UV) instantaneous star formation rates (SFRs) for individual Herschel galaxies up to z ˜ 4, subtracted of possible active galactic nucleus (AGN) contamination. The comparison with model predictions shows that SAMs broadly reproduce the observed SFRFs up to z ˜ 2, when the observational errors on the SFR are taken into account. However, all the models seem to underpredict the bright end of the SFRF at z ≳ 2. The cause of this underprediction could lie in an improper modelling of several model ingredients, like too strong (AGN or stellar) feedback in the brighter objects or too low fallback of gas, caused by weak feedback and outflows at earlier epochs.

  7. Analytical Model and Optimized Design of Power Transmitting Coil for Inductively Coupled Endoscope Robot.

    Science.gov (United States)

    Ke, Quan; Luo, Weijie; Yan, Guozheng; Yang, Kai

    2016-04-01

    A wireless power transfer system based on the weakly inductive coupling makes it possible to provide the endoscope microrobot (EMR) with infinite power. To facilitate the patients' inspection with the EMR system, the diameter of the transmitting coil is enlarged to 69 cm. Due to the large transmitting range, a high quality factor of the Litz-wire transmitting coil is a necessity to ensure the intensity of magnetic field generated efficiently. Thus, this paper builds an analytical model of the transmitting coil, and then, optimizes the parameters of the coil by enlarging the quality factor. The lumped model of the transmitting coil includes three parameters: ac resistance, self-inductance, and stray capacitance. Based on the exact two-dimension solution, the accurate analytical expression of ac resistance is derived. Several transmitting coils of different specifications are utilized to verify this analytical expression, being in good agreements with the measured results except the coils with a large number of strands. Then, the quality factor of transmitting coils can be well predicted with the available analytical expressions of self- inductance and stray capacitance. Owing to the exact estimation of quality factor, the appropriate coil turns of the transmitting coil is set to 18-40 within the restrictions of transmitting circuit and human tissue issues. To supply enough energy for the next generation of the EMR equipped with a Ø9.5×10.1 mm receiving coil, the coil turns of the transmitting coil is optimally set to 28, which can transfer a maximum power of 750 mW with the remarkable delivering efficiency of 3.55%.

  8. Analytic model of energy-absorption response functions in compound X-ray detector materials.

    Science.gov (United States)

    Yun, Seungman; Kim, Ho Kyung; Youn, Hanbean; Tanguay, Jesse; Cunningham, Ian A

    2013-10-01

    The absorbed energy distribution (AED) in X-ray imaging detectors is an important factor that affects both energy resolution and image quality through the Swank factor and detective quantum efficiency. In the diagnostic energy range (20-140 keV), escape of characteristic photons following photoelectric absorption and Compton scatter photons are primary sources of absorbed-energy dispersion in X-ray detectors. In this paper, we describe the development of an analytic model of the AED in compound X-ray detector materials, based on the cascaded-systems approach, that includes the effects of escape and reabsorption of characteristic and Compton-scatter photons. We derive analytic expressions for both semi-infinite slab and pixel geometries and validate our approach by Monte Carlo simulations. The analytic model provides the energy-dependent X-ray response function of arbitrary compound materials without time-consuming Monte Carlo simulations. We believe this model will be useful for correcting spectral distortion artifacts commonly observed in photon-counting applications and optimal design and development of novel X-ray detectors.

  9. High-Performance data flows using analytical models and measurements

    Energy Technology Data Exchange (ETDEWEB)

    Rao, Nageswara S [ORNL; Towlsey, D. [University of Massachusetts; Vardoyan, G. [University of Massachusetts; Kettimuthu, R. [Argonne National Laboratory (ANL); Foster, I. [Argonne National Laboratory (ANL); Settlemyer, Bradley [Los Alamos National Laboratory (LANL)

    2016-01-01

    The combination of analytical models and measurements provide practical configurations and parameters to achieve high data transport rates: (a) buffer sizes and number of parallel streams for improved memory and file transfer rates, (b) Hamilton and Scalable TCP congestion control modules for memory transfers in place of default CUBIC, and (c) direct IO mode for Lustre file systems for wide-area transfers. Conventional parameter selection using full sweeps is impractical in many cases since it takes months. By exploiting the unimodality of throughput profiles, we developed the d-w method that significantly reduces the number of measurements needed for parameter identification. This heuristic method was effective in practice in reducing the measurements by about 90% for Lustre and XFS file transfers.

  10. An Analytical Model of Joule Heating in Piezoresistive Microcantilevers

    Directory of Open Access Journals (Sweden)

    Chongdu Cho

    2010-11-01

    Full Text Available The present study investigates Joule heating in piezoresistive microcantilever sensors. Joule heating and thermal deflections are a major source of noise in such sensors. This work uses analytical and numerical techniques to characterise the Joule heating in 4-layer piezoresistive microcantilevers made of silicon and silicon dioxide substrates but with the same U-shaped silicon piezoresistor. A theoretical model for predicting the temperature generated due to Joule heating is developed. The commercial finite element software ANSYS Multiphysics was used to study the effect of electrical potential on temperature and deflection produced in the cantilevers. The effect of piezoresistor width on Joule heating is also studied. Results show that Joule heating strongly depends on the applied potential and width of piezoresistor and that a silicon substrate cantilever has better thermal characteristics than a silicon dioxide cantilever.

  11. An analytical model of joule heating in piezoresistive microcantilevers.

    Science.gov (United States)

    Ansari, Mohd Zahid; Cho, Chongdu

    2010-01-01

    The present study investigates Joule heating in piezoresistive microcantilever sensors. Joule heating and thermal deflections are a major source of noise in such sensors. This work uses analytical and numerical techniques to characterise the Joule heating in 4-layer piezoresistive microcantilevers made of silicon and silicon dioxide substrates but with the same U-shaped silicon piezoresistor. A theoretical model for predicting the temperature generated due to Joule heating is developed. The commercial finite element software ANSYS Multiphysics was used to study the effect of electrical potential on temperature and deflection produced in the cantilevers. The effect of piezoresistor width on Joule heating is also studied. Results show that Joule heating strongly depends on the applied potential and width of piezoresistor and that a silicon substrate cantilever has better thermal characteristics than a silicon dioxide cantilever.

  12. Analytic Solutions of Three-Level Dressed-Atom Model

    Institute of Scientific and Technical Information of China (English)

    WANG Zheng-Ling; YIN Jian-Ping

    2004-01-01

    On the basis of the dressed-atom model, the general analytic expressions for the eigenenergies, eigenstates and their optical potentials of the A-configuration three-level atom system are derived and analysed. From the calculation of dipole matrix element of different dressed states, we obtain the spontaneous-emission rates in the dressed-atom picture. We find that our general expressions of optical potentials for the three-level dressed atom can be reduced to the same as ones in previous references under the approximation of a small saturation parameter. We also analyse the dependences of the optical potentials of a three-level 85Rb atom on the laser detuning and the dependences of spontaneous-emission rates on the radial position in the dark hollow beam, and discuss the probability (population) evolutions of dressed-atomic eigenstates in three levels in the hollow beam.

  13. A simplified analytical random walk model for proton dose calculation

    Science.gov (United States)

    Yao, Weiguang; Merchant, Thomas E.; Farr, Jonathan B.

    2016-10-01

    We propose an analytical random walk model for proton dose calculation in a laterally homogeneous medium. A formula for the spatial fluence distribution of primary protons is derived. The variance of the spatial distribution is in the form of a distance-squared law of the angular distribution. To improve the accuracy of dose calculation in the Bragg peak region, the energy spectrum of the protons is used. The accuracy is validated against Monte Carlo simulation in water phantoms with either air gaps or a slab of bone inserted. The algorithm accurately reflects the dose dependence on the depth of the bone and can deal with small-field dosimetry. We further applied the algorithm to patients’ cases in the highly heterogeneous head and pelvis sites and used a gamma test to show the reasonable accuracy of the algorithm in these sites. Our algorithm is fast for clinical use.

  14. A semi-analytic dynamical friction model for cored galaxies

    CERN Document Server

    Petts, James A; Gualandris, Alessia

    2016-01-01

    We present a dynamical friction model based on Chandrasekhar's formula that reproduces the fast inspiral and stalling experienced by satellites orbiting galaxies with a large constant density core. We show that the fast inspiral phase does not owe to resonance. Rather, it owes to the background velocity distribution function for the constant density cores being dissimilar from the usually-assumed Maxwellian distribution. Using the correct background velocity distribution function and the semi-analytic model from Petts et al. (2015), we are able to correctly reproduce the infall rate in both cored and cusped potentials. However, in the case of large cores, our model is no longer able to correctly capture core-stalling. We show that this stalling owes to the tidal radius of the satellite approaching the size of the core. By switching off dynamical friction when rt(r) = r (where rt is the tidal radius at the satellite's position) we arrive at a model which reproduces the N-body results remarkably well. Since the...

  15. An analytical model of capped turbulent oscillatory bottom boundary layers

    Science.gov (United States)

    Shimizu, Kenji

    2010-03-01

    An analytical model of capped turbulent oscillatory bottom boundary layers (BBLs) is proposed using eddy viscosity of a quadratic form. The common definition of friction velocity based on maximum bottom shear stress is found unsatisfactory for BBLs under rotating flows, and a possible extension based on turbulent kinetic energy balance is proposed. The model solutions show that the flow may slip at the top of the boundary layer due to capping by the water surface or stratification, reducing the bottom shear stress, and that the Earth's rotation induces current and bottom shear stress components perpendicular to the interior flow with a phase lag (or lead). Comparisons with field and numerical experiments indicate that the model predicts the essential characteristics of the velocity profiles, although the agreement is rather qualitative due to assumptions of quadratic eddy viscosity with time-independent friction velocity and a well-mixed boundary layer. On the other hand, the predicted linear friction coefficients, phase lead, and veering angle at the bottom agreed with available data with an error of 3%-10%, 5°-10°, and 5°-10°, respectively. As an application of the model, the friction coefficients are used to calculate e-folding decay distances of progressive internal waves with a semidiurnal frequency.

  16. Analytical model for non-thermal pressure in galaxy clusters

    Science.gov (United States)

    Shi, Xun; Komatsu, Eiichiro

    2014-07-01

    Non-thermal pressure in the intracluster gas has been found ubiquitously in numerical simulations, and observed indirectly. In this paper we develop an analytical model for intracluster non-thermal pressure in the virial region of relaxed clusters. We write down and solve a first-order differential equation describing the evolution of non-thermal velocity dispersion. This equation is based on insights gained from observations, numerical simulations, and theory of turbulence. The non-thermal energy is sourced, in a self-similar fashion, by the mass growth of clusters via mergers and accretion, and dissipates with a time-scale determined by the turnover time of the largest turbulence eddies. Our model predicts a radial profile of non-thermal pressure for relaxed clusters. The non-thermal fraction increases with radius, redshift, and cluster mass, in agreement with numerical simulations. The radial dependence is due to a rapid increase of the dissipation time-scale with radii, and the mass and redshift dependence comes from the mass growth history. Combing our model for the non-thermal fraction with the Komatsu-Seljak model for the total pressure, we obtain thermal pressure profiles, and compute the hydrostatic mass bias. We find typically 10 per cent bias for the hydrostatic mass enclosed within r500.

  17. Blind source separation of fMRI data by means of factor analytic transformations

    NARCIS (Netherlands)

    Langers, Dave R. M.

    2009-01-01

    In this study, the application of factor analytic (FA) rotation methods in the context of neuroimaging data analysis was explored. Three FA algorithms (ProMax, QuartiMax, and VariMax) were employed to carry out blind source separation in a functional magnetic resonance imaging (fMRI) experiment that

  18. Beyond Engagement Analytics: Which Online Mixed-Data Factors Predict Student Learning Outcomes?

    Science.gov (United States)

    Strang, Kenneth David

    2017-01-01

    This mixed-method study focuses on online learning analytics, a research area of importance. Several important student attributes and their online activities are examined to identify what seems to work best to predict higher grades. The purpose is to explore the relationships between student grade and key learning engagement factors using a large…

  19. Blind source separation of fMRI data by means of factor analytic transformations

    NARCIS (Netherlands)

    Langers, Dave R. M.

    2009-01-01

    In this study, the application of factor analytic (FA) rotation methods in the context of neuroimaging data analysis was explored. Three FA algorithms (ProMax, QuartiMax, and VariMax) were employed to carry out blind source separation in a functional magnetic resonance imaging (fMRI) experiment that

  20. A confirmatory factor analytic study of a self-leadership measure in South Africa

    Directory of Open Access Journals (Sweden)

    Bright Mahembe

    2013-01-01

    Full Text Available Orientation: Self-leadership is considered to be essential for effective individual functioning in occupational and academic contexts. The revised self-leadership questionnaire (RSLQ is widely utilised for measuring self-leadership, but its psychometric properties have not been established on a South African sample. By implication, important questions also exist about the theoretical structure of self-leadership in the South African context. Research purpose: The research aim of this study was to investigate the reliability and factorial validity of the revised self-leadership questionnaire on a South African sample. In doing so, the results of the research would also provide valuable insights into the latent factor structure of the self-leadership construct. Motivation for the study: On a practical level, the research sought internal validity evidence for the use of the RSLQ in the South African context. On a theoretical level, questions remain about the best conceptual representation of self-leadership as a construct. Research design, approach and method: The revised self-leadership questionnaire was administered to a non-probability sample of 375 South African young adults. The first and second-order factor structure underlying contemporary models of self-leadership using confirmatory factor analytic techniques was tested. Main findings: Results showed that the RSLQ measured self-leadership with suitable reliability and internal validity. All eight subscales had high internal consistency coefficients. Confirmatory factor analysis (CFA of the first and second-order models conclusively demonstrated good factorial validity. Practical/managerial implications: The study found that the RSLQ has good measurement properties for a South African context. Academics, practitioners and managers are urged to use the measure in its present form for applications such as leadership development and promoting self-management. Contribution/value-addition: The

  1. What makes us think? A three-stage dual-process model of analytic engagement.

    Science.gov (United States)

    Pennycook, Gordon; Fugelsang, Jonathan A; Koehler, Derek J

    2015-08-01

    The distinction between intuitive and analytic thinking is common in psychology. However, while often being quite clear on the characteristics of the two processes ('Type 1' processes are fast, autonomous, intuitive, etc. and 'Type 2' processes are slow, deliberative, analytic, etc.), dual-process theorists have been heavily criticized for being unclear on the factors that determine when an individual will think analytically or rely on their intuition. We address this issue by introducing a three-stage model that elucidates the bottom-up factors that cause individuals to engage Type 2 processing. According to the model, multiple Type 1 processes may be cued by a stimulus (Stage 1), leading to the potential for conflict detection (Stage 2). If successful, conflict detection leads to Type 2 processing (Stage 3), which may take the form of rationalization (i.e., the Type 1 output is verified post hoc) or decoupling (i.e., the Type 1 output is falsified). We tested key aspects of the model using a novel base-rate task where stereotypes and base-rate probabilities cued the same (non-conflict problems) or different (conflict problems) responses about group membership. Our results support two key predictions derived from the model: (1) conflict detection and decoupling are dissociable sources of Type 2 processing and (2) conflict detection sometimes fails. We argue that considering the potential stages of reasoning allows us to distinguish early (conflict detection) and late (decoupling) sources of analytic thought. Errors may occur at both stages and, as a consequence, bias arises from both conflict monitoring and decoupling failures.

  2. Analysing an Analytical Solution Model for Simultaneous Mobility

    Directory of Open Access Journals (Sweden)

    Md. Ibrahim Chowdhury

    2013-12-01

    Full Text Available Current mobility models for simultaneous mobility h ave their convolution in designing simultaneous movement where mobile nodes (MNs travel randomly f rom the two adjacent cells at the same time and also have their complexity in the measurement of th e occurrences of simultaneous handover. Simultaneou s mobility problem incurs when two of the MNs start h andover approximately at the same time. As Simultaneous mobility is different for the other mo bility pattern, generally occurs less number of tim es in real time; we analyze that a simplified simultaneou s mobility model can be considered by taking only symmetric positions of MNs with random steps. In ad dition to that, we simulated the model using mSCTP and compare the simulation results in different sce narios with customized cell ranges. The analytical results shows that with the bigger the cell sizes, simultaneous handover with random steps occurrences become lees and for the sequential mobility (where initial positions of MNs is predetermined with ran dom steps, simultaneous handover is more frequent.

  3. Green Transport Balanced Scorecard Model with Analytic Network Process Support

    Directory of Open Access Journals (Sweden)

    David Staš

    2015-11-01

    Full Text Available In recent decades, the performance of economic and non-economic activities has required them to be friendly with the environment. Transport is one of the areas having considerable potential within the scope. The main assumption to achieve ambitious green goals is an effective green transport evaluation system. However, these systems are researched from the industrial company and supply chain perspective only sporadically. The aim of the paper is to design a conceptual framework for creating the Green Transport (GT Balanced Scorecard (BSC models from the viewpoint of industrial companies and supply chains using an appropriate multi-criteria decision making method. The models should allow green transport performance evaluation and support of an effective implementation of green transport strategies. Since performance measures used in Balanced Scorecard models are interdependent, the Analytic Network Process (ANP was used as the appropriate multi-criteria decision making method. The verification of the designed conceptual framework was performed on a real supply chain of the European automotive industry.

  4. Machine learning and cosmological simulations - I. Semi-analytical models

    Science.gov (United States)

    Kamdar, Harshil M.; Turk, Matthew J.; Brunner, Robert J.

    2016-01-01

    We present a new exploratory framework to model galaxy formation and evolution in a hierarchical Universe by using machine learning (ML). Our motivations are two-fold: (1) presenting a new, promising technique to study galaxy formation, and (2) quantitatively analysing the extent of the influence of dark matter halo properties on galaxies in the backdrop of semi-analytical models (SAMs). We use the influential Millennium Simulation and the corresponding Munich SAM to train and test various sophisticated ML algorithms (k-Nearest Neighbors, decision trees, random forests, and extremely randomized trees). By using only essential dark matter halo physical properties for haloes of M > 1012 M⊙ and a partial merger tree, our model predicts the hot gas mass, cold gas mass, bulge mass, total stellar mass, black hole mass and cooling radius at z = 0 for each central galaxy in a dark matter halo for the Millennium run. Our results provide a unique and powerful phenomenological framework to explore the galaxy-halo connection that is built upon SAMs and demonstrably place ML as a promising and a computationally efficient tool to study small-scale structure formation.

  5. Machine Learning and Cosmological Simulations I: Semi-Analytical Models

    CERN Document Server

    Kamdar, Harshil M; Brunner, Robert J

    2016-01-01

    We present a new exploratory framework to model galaxy formation and evolution in a hierarchical universe by using machine learning (ML). Our motivations are two-fold: (1) presenting a new, promising technique to study galaxy formation, and (2) quantitatively analyzing the extent of the influence of dark matter halo properties on galaxies in the backdrop of semi-analytical models (SAMs). We use the influential Millennium Simulation and the corresponding Munich SAM to train and test various sophisticated machine learning algorithms (k-Nearest Neighbors, decision trees, random forests and extremely randomized trees). By using only essential dark matter halo physical properties for haloes of $M>10^{12} M_{\\odot}$ and a partial merger tree, our model predicts the hot gas mass, cold gas mass, bulge mass, total stellar mass, black hole mass and cooling radius at z = 0 for each central galaxy in a dark matter halo for the Millennium run. Our results provide a unique and powerful phenomenological framework to explore...

  6. Analytical modelling for ultrasonic surface mechanical attrition treatment

    Directory of Open Access Journals (Sweden)

    Guan-Rong Huang

    2015-07-01

    Full Text Available The grain refinement, gradient structure, fatigue limit, hardness, and tensile strength of metallic materials can be effectively enhanced by ultrasonic surface mechanical attrition treatment (SMAT, however, never before has SMAT been treated with rigorous analytical modelling such as the connection among the input energy and power and resultant temperature of metallic materials subjected to SMAT. Therefore, a systematic SMAT model is actually needed. In this article, we have calculated the averaged speed, duration time of a cycle, kinetic energy and kinetic energy loss of flying balls in SMAT for structural metallic materials. The connection among the quantities such as the frequency and amplitude of attrition ultrasonic vibration motor, the diameter, mass and density of balls, the sample mass, and the height of chamber have been considered and modelled in details. And we have introduced the one-dimensional heat equation with heat source within uniform-distributed depth in estimating the temperature distribution and heat energy of sample. In this approach, there exists a condition for the frequency of flying balls reaching a steady speed. With these known quantities, we can estimate the strain rate, hardness, and grain size of sample.

  7. A SPICE model for a phase-change memory cell based on the analytical conductivity model

    Science.gov (United States)

    Yiqun, Wei; Xinnan, Lin; Yuchao, Jia; Xiaole, Cui; Jin, He; Xing, Zhang

    2012-11-01

    By way of periphery circuit design of the phase-change memory, it is necessary to present an accurate compact model of a phase-change memory cell for the circuit simulation. Compared with the present model, the model presented in this work includes an analytical conductivity model, which is deduced by means of the carrier transport theory instead of the fitting model based on the measurement. In addition, this model includes an analytical temperature model based on the 1D heat-transfer equation and the phase-transition dynamic model based on the JMA equation to simulate the phase-change process. The above models for phase-change memory are integrated by using Verilog-A language, and results show that this model is able to simulate the I-V characteristics and the programming characteristics accurately.

  8. An analytical model of heat generation for eccentric cylindrical pin in friction stir welding

    Directory of Open Access Journals (Sweden)

    Ahmed Ramadan Shaaban Essa

    2016-07-01

    Full Text Available An analytical model for heat generation for eccentric cylindrical pin in friction stir welding was developed that utilizes a new factor based on the tool pin eccentricity. The proposed analytical expression is a modification of previous analytical models from the literature, which is verified and well matches with the model developed by previous researchers. Results of plunge force and peak temperature were used to validate the current proposed model. The cylindrical tool pin with eccentricities of 0, 0.2, and 0.8 mm were used to weld two types of aluminum alloys; a low deformation resistant AA1050-H12, and a relatively high deformation resistant AA5754-H24 alloy. The FSW was performed at constant tool rotation speed of 600 rpm and different welding speeds of 100, 300, and 500 mm/min. Experimental results implied that less temperature is generated using eccentric cylindrical pin than cylindrical pin without eccentricity under the given set of FSW process conditions. Furthermore, numerical simulation results show that increasing the pin eccentricity leads to decrease in peak temperature.

  9. A physically based analytical model of flood frequency curves

    Science.gov (United States)

    Basso, S.; Schirmer, M.; Botter, G.

    2016-09-01

    Predicting magnitude and frequency of floods is a key issue in hydrology, with implications in many fields ranging from river science and geomorphology to the insurance industry. In this paper, a novel physically based approach is proposed to estimate the recurrence intervals of seasonal flow maxima. The method links the extremal distribution of streamflows to the stochastic dynamics of daily discharge, providing an analytical expression of the seasonal flood frequency curve. The parameters involved in the formulation embody climate and landscape attributes of the contributing catchment and can be estimated from daily rainfall and streamflow data. Only one parameter, which is linked to the antecedent wetness condition in the watershed, needs to be calibrated on the observed maxima. The performance of the method is discussed through a set of applications in four rivers featuring heterogeneous daily flow regimes. The model provides reliable estimates of seasonal maximum flows in different climatic settings and is able to capture diverse shapes of flood frequency curves emerging in erratic and persistent flow regimes. The proposed method exploits experimental information on the full range of discharges experienced by rivers. As a consequence, model performances do not deteriorate when the magnitude of events with return times longer than the available sample size is estimated. The approach provides a framework for the prediction of floods based on short data series of rainfall and daily streamflows that may be especially valuable in data scarce regions of the world.

  10. New analytic solutions for modeling vertical gravity gradient anomalies

    Science.gov (United States)

    Kim, Seung-Sep; Wessel, Paul

    2016-05-01

    Modern processing of satellite altimetry for use in marine gravimetry involves computing the along-track slopes of observed sea-surface heights, projecting them into east-west and north-south deflection of the vertical grids, and using Laplace's equation to algebraically obtain a grid of the vertical gravity gradient (VGG). The VGG grid is then integrated via overlapping, flat Earth Fourier transforms to yield a free-air anomaly grid. Because of this integration and associated edge effects, the VGG grid retains more short-wavelength information (e.g., fracture zone and seamount signatures) that is of particular importance for plate tectonic investigations. While modeling of gravity anomalies over arbitrary bodies has long been a standard undertaking, similar modeling of VGG anomalies over oceanic features is not commonplace yet. Here we derive analytic solutions for VGG anomalies over simple bodies and arbitrary 2-D and 3-D sources. We demonstrate their usability in determining mass excess and deficiency across the Mendocino fracture zone (a 2-D feature) and find the best bulk density estimate for Jasper seamount (a 3-D feature). The methodologies used herein are implemented in the Generic Mapping Tools, available from gmt.soest.hawaii.edu.

  11. Analytical examples, measurement models, and classical limit of quantum backflow

    Science.gov (United States)

    Yearsley, J. M.; Halliwell, J. J.; Hartshorn, R.; Whitby, A.

    2012-10-01

    We investigate the backflow effect in elementary quantum mechanics—the phenomenon in which a state consisting entirely of positive momenta may have negative current and the probability flows in the opposite direction to the momentum. We compute the current and flux for states consisting of superpositions of Gaussian wave packets. These are experimentally realizable but the amount of backflow is small. Inspired by the numerical results of Penz [Penz, Grübl, Kreidl, and Wagner, J. Phys. AJPHAC50305-447010.1088/0305-4470/39/2/012 39, 423 (2006)], we find two nontrivial wave functions whose current at any time may be computed analytically and which have periods of significant backflow, in one case with a backward flux equal to about 70% of the maximum possible backflow, a dimensionless number cbm≈0.04, discovered by Bracken and Melloy [Bracken and Melloy, J. Phys. AJPHAC50305-447010.1088/0305-4470/27/6/040 27, 2197 (1994)]. This number has the unusual property of being independent of ℏ (and also of all other parameters of the model), despite corresponding to an obviously quantum-mechanical effect, and we shed some light on this surprising property by considering the classical limit of backflow. We discuss some specific measurement models in which backflow may be identified in certain measurable probabilities.

  12. A semi-analytical variable property droplet combustion model

    Science.gov (United States)

    Sisti, John

    A multizone droplet burn model is developed to account for changes in the thermal and transport properties as a function of droplet radius. The formulation is semi-analytical---allowing for accurate and computationally efficient estimates of flame structure and burn rates. Zonal thermal and transport properties are computed using the Cantera software and pre-tabulated for rapid evaluation during run-time. Model predictions are compared to experimental measurements of burning n-heptane, ethanol and methanol droplets. An adaptive zone refinement algorithm is developed that minimizes the number of zones required to provide accurate estimates of burn time without excess zones. A sensitivity study of burn rate and flame stand-off with far-field oxygen concentration is conducted with comparisons to experimental data. Overall agreement to data is encouraging with errors typically less than 20% for predictions of burn rates, stand-off ratio and flame temperature for the fuels considered. The quiescent quasi-steady solution is extended to a convective transient solution without the need to solve an eigenvalue solution in time. The time history of the burning droplets show good comparison with experimental data. To further decrease computational cost, the source terms for the transient solution are linearized for an explicit time marching solution. An error convergence study was performed to show a time-step independent solution exists at a reasonable Delta t.

  13. Analytical model for non-thermal pressure in galaxy clusters

    CERN Document Server

    Shi, Xun

    2014-01-01

    Non-thermal pressure in the intracluster gas has been found ubiquitously in numerical simulations, and observed indirectly. In this paper we develop, for the first time, an analytical model for intracluster non-thermal pressure. We write down and solve a first-order differential equation describing the evolution of non-thermal velocity dispersion. This equation is based on insights gained from observations, numerical simulations, and theory of turbulence. The non-thermal energy is sourced, in a self-similar fashion, by the mass growth of clusters via mergers and accretion, and dissipates with a time scale determined by the turnover time of the largest turbulence eddies. Our model predicts a radial profile of non-thermal pressure for relaxed clusters. The non-thermal fraction increases with radius, redshift, and cluster mass, in agreement with numerical simulations. The radial dependence is due to a rapid increase of the dissipation time scale with radii, and the mass and redshift dependence comes from the mas...

  14. Analytical model for flux saturation in sediment transport.

    Science.gov (United States)

    Pähtz, Thomas; Parteli, Eric J R; Kok, Jasper F; Herrmann, Hans J

    2014-05-01

    The transport of sediment by a fluid along the surface is responsible for dune formation, dust entrainment, and a rich diversity of patterns on the bottom of oceans, rivers, and planetary surfaces. Most previous models of sediment transport have focused on the equilibrium (or saturated) particle flux. However, the morphodynamics of sediment landscapes emerging due to surface transport of sediment is controlled by situations out of equilibrium. In particular, it is controlled by the saturation length characterizing the distance it takes for the particle flux to reach a new equilibrium after a change in flow conditions. The saturation of mass density of particles entrained into transport and the relaxation of particle and fluid velocities constitute the main relevant relaxation mechanisms leading to saturation of the sediment flux. Here we present a theoretical model for sediment transport which, for the first time, accounts for both these relaxation mechanisms and for the different types of sediment entrainment prevailing under different environmental conditions. Our analytical treatment allows us to derive a closed expression for the saturation length of sediment flux, which is general and thus can be applied under different physical conditions.

  15. An analytical model and parametric study of electrical contact resistance in proton exchange membrane fuel cells

    Science.gov (United States)

    Wu, Zhiliang; Wang, Shuxin; Zhang, Lianhong; Hu, S. Jack

    This paper presents an analytical model of the electrical contact resistance between the carbon paper gas diffusion layers (GDLs) and the graphite bipolar plates (BPPs) in a proton exchange membrane (PEM) fuel cell. The model is developed based on the classical statistical contact theory for a PEM fuel cell, using the same probability distributions of the GDL structure and BPP surface profile as previously described in Wu et al. [Z. Wu, Y. Zhou, G. Lin, S. Wang, S.J. Hu, J. Power Sources 182 (2008) 265-269] and Zhou et al. [Y. Zhou, G. Lin, A.J. Shih, S.J. Hu, J. Power Sources 163 (2007) 777-783]. Results show that estimates of the contact resistance compare favorably with experimental data by Zhou et al. [Y. Zhou, G. Lin, A.J. Shih, S.J. Hu, J. Power Sources 163 (2007) 777-783]. Factors affecting the contact behavior are systematically studied using the analytical model, including the material properties of the two contact bodies and factors arising from the manufacturing processes. The transverse Young's modulus of chopped carbon fibers in the GDL and the surface profile of the BPP are found to be significant to the contact resistance. The factor study also sheds light on the manufacturing requirements of carbon fiber GDLs for a better contact performance in PEM fuel cells.

  16. An analytical model and parametric study of electrical contact resistance in proton exchange membrane fuel cells

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Zhiliang; Wang, Shuxin; Zhang, Lianhong [School of Mechanical Engineering, Tianjin University, Tianjin 300072 (China); Hu, S. Jack [Department of Mechanical Engineering, The University of Michigan, Ann Arbor, MI 48109-2125 (United States)

    2009-04-15

    This paper presents an analytical model of the electrical contact resistance between the carbon paper gas diffusion layers (GDLs) and the graphite bipolar plates (BPPs) in a proton exchange membrane (PEM) fuel cell. The model is developed based on the classical statistical contact theory for a PEM fuel cell, using the same probability distributions of the GDL structure and BPP surface profile as previously described in Wu et al. [Z. Wu, Y. Zhou, G. Lin, S. Wang, S.J. Hu, J. Power Sources 182 (2008) 265-269] and Zhou et al. [Y. Zhou, G. Lin, A.J. Shih, S.J. Hu, J. Power Sources 163 (2007) 777-783]. Results show that estimates of the contact resistance compare favorably with experimental data by Zhou et al. [Y. Zhou, G. Lin, A.J. Shih, S.J. Hu, J. Power Sources 163 (2007) 777-783]. Factors affecting the contact behavior are systematically studied using the analytical model, including the material properties of the two contact bodies and factors arising from the manufacturing processes. The transverse Young's modulus of chopped carbon fibers in the GDL and the surface profile of the BPP are found to be significant to the contact resistance. The factor study also sheds light on the manufacturing requirements of carbon fiber GDLs for a better contact performance in PEM fuel cells. (author)

  17. An Analytical Model for Predicting Stab Resistance of Flexible Woven Composites

    Science.gov (United States)

    Hou, Limin; Sun, Baozhong; Gu, Bohong

    2013-08-01

    Flexible woven composites have been widely used in geotextiles and light weight building structures. The stab resistance behavior of the flexible woven composite is an important factor for the application design. This paper reports an analytical model for predicting stab resistance of flexible woven composites under perpendicular stab with a blunt steel penetrator. The analytical model was established based on the microstructure and the deformation shape of the flexible woven composite under normal penetration. During the quasi-static stab penetration, the strain energies of warp and weft yarns and resins have been calculated. The stab resistance was calculated from the strain energies of the flexible woven composite. Furthermore, the contributions of the warp and weft yarns, resins to the stab resistance have been analyzed. It was found the three constituents have near the same contribution to the stab resistance. The higher value of weaving density, strength of yarns and especially the higher strength coating resins will lead the higher stab resistance. With the analytical model, the stab resistance would be expected to be designed in an efficient way with an acceptable precision.

  18. Toward making the mean spherical approximation of primitive model electrolytes analytic: an analytic approximation of the MSA screening parameter.

    Science.gov (United States)

    Gillespie, Dirk

    2011-01-28

    The mean spherical approximation (MSA) for the primitive model of electrolytes provides reasonable estimates of thermodynamic quantities such as the excess chemical potential and screening length. It is especially widely used because of its explicit formulas so that numerically solving equations is minimized. As originally formulated, the MSA screening parameter Γ (akin to the reciprocal of the Debye screening length) does not have an explicit analytic formula; an equation for Γ must be solved numerically. Here, an analytic approximation for Γ is presented whose relative error is generally ≲10(-5). If more accuracy is desired, one step of an iterative procedure (which also produces an explicit formula for Γ) is shown to give relative errors within machine precision in many cases. Even when ion diameter ratios are ∼10 and ion valences are ∼10, the relative error for the analytic approximation is still ≲10(-3) and for the single iterative substitution it is ≲10(-9).

  19. 33 CFR 385.33 - Revisions to models and analytical tools.

    Science.gov (United States)

    2010-07-01

    ... analytical tools. 385.33 Section 385.33 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE... Incorporating New Information Into the Plan § 385.33 Revisions to models and analytical tools. (a) In carrying... and other analytical tools for conducting analyses for the planning, design, construction,...

  20. INFORMATIONAL-ANALYTIC MODEL OF REGIONAL PROJECT PORTFOLIO FORMING

    Directory of Open Access Journals (Sweden)

    I. A. Osaulenko

    2016-01-01

    Full Text Available The article is devoted to the problem of regional project portfolio management in context of interaction of the regional development’s motive forces interaction. The features of innovation development on the regional level and their influence on the portfolio forming process considered. An existing approaches for portfolio modelling and formal criterion of the projects selection analyzed. At the same time the organization of key subjects of regional development interaction described. The aim of the article is investigation of informational aspects of project selection in process of the main development’s motive forces interaction and analytic model of portfolio filling validation. At that an inclination of stakeholders to reach a consensus taking into account. The Triple Helix conception using for concrete definition of the functions of the regional development’s motive forces. Asserted, that any component of innovation triad «science–business–government» can be an initiator of regional project, but it need to support two another components. Non-power interaction theory using for investigation of subjects interrelations in process of joint activity proposed. One of the key concept of the theory is information distance. It characterizes inclination of the parties to reach a consensus based on statistics. Projections of information distance onto directions of development axes using for more accurate definition of mutual positions in the all lines of development proposed. Another important parameter of the model which has an influence on the project support is awareness of stakeholders about it. Formalized description of project in the form of fast set of parameters proposes to use for determination of the awareness. The weighting coefficients for each parameter by expert way. Simultaneously the precision of the each parameter setting for all presented projects determines. On the base of appointed values of information distances and

  1. Improving intellectual capital model using analytic network process

    Directory of Open Access Journals (Sweden)

    Ratapol Wudhikarn

    2013-06-01

    Full Text Available This study proposes a new approach to prioritize the key company’s indicators and relative elements following process model of intellectual capital (IC. The IC is improved by the application ofanalytic network process (ANP. The ANP provides the weights and priorities to all focused key performance indicators (KPIs serving to the business concept. These obtained weights can also be passedto other relative elements, those of key success factors (KSFs and IC categories, in the process model of IC. These prioritized KPIs, KSFs and IC categories assist the managers and decision-makers to focus on the crucial elements that mostly affect the business concept.

  2. Applications of meta-analytic structural equation modelling in health psychology: examples, issues, and recommendations.

    Science.gov (United States)

    Cheung, Mike W-L; Hong, Ryan Y

    2017-09-01

    Statistical methods play an important role in behavioural, medical, and social sciences. Two recent statistical advances are structural equation modelling (SEM) and meta-analysis. SEM is used to test hypothesised models based on substantive theories, which can be path, confirmatory factor analytic, or full structural equation models. Meta-analysis is used to synthesise research findings in a particular topic. This article demonstrates another recent statistical advance - meta-analytic structural equation modelling (MASEM) - that combines meta-analysis and SEM to synthesise research findings for the purpose of testing hypothesised models. Using the theory of planned behaviour as an example, we show how MASEM can be used to address important research questions that cannot be answered by univariate meta-analyses on Pearson correlations. Specifically, MASEM allows researchers to: (1) test whether the proposed models are consistent with the data; (2) estimate partial effects after controlling for other variables; (3) estimate functions of parameter estimates such as indirect effects; and (4) include latent variables in the models. We illustrate the procedures with an example on the theory of planned behaviour. Practical issues in MASEM and suggested solutions are discussed.

  3. Using visual analytics model for pattern matching in surveillance data

    Science.gov (United States)

    Habibi, Mohammad S.

    2013-03-01

    In a persistent surveillance system huge amount of data is collected continuously and significant details are labeled for future references. In this paper a method to summarize video data as a result of identifying events based on these tagged information is explained, leading to concise description of behavior within a section of extended recordings. An efficient retrieval of various events thus becomes the foundation for determining a pattern in surveillance system observations, both in its extended and fragmented versions. The patterns consisting of spatiotemporal semantic contents are extracted and classified by application of video data mining on generated ontology, and can be matched based on analysts interest and rules set forth for decision making. The proposed extraction and classification method used in this paper uses query by example for retrieving similar events containing relevant features, and is carried out by data aggregation. Since structured data forms majority of surveillance information this Visual Analytics model employs KD-Tree approach to group patterns in variant space and time, thus making it convenient to identify and match any abnormal burst of pattern detected in a surveillance video. Several experimental video were presented to viewers to analyze independently and were compared with the results obtained in this paper to demonstrate the efficiency and effectiveness of the proposed technique.

  4. Analytical models for total dose ionization effects in MOS devices.

    Energy Technology Data Exchange (ETDEWEB)

    Campbell, Phillip Montgomery; Bogdan, Carolyn W.

    2008-08-01

    MOS devices are susceptible to damage by ionizing radiation due to charge buildup in gate, field and SOI buried oxides. Under positive bias holes created in the gate oxide will transport to the Si / SiO{sub 2} interface creating oxide-trapped charge. As a result of hole transport and trapping, hydrogen is liberated in the oxide which can create interface-trapped charge. The trapped charge will affect the threshold voltage and degrade the channel mobility. Neutralization of oxidetrapped charge by electron tunneling from the silicon and by thermal emission can take place over long periods of time. Neutralization of interface-trapped charge is not observed at room temperature. Analytical models are developed that account for the principal effects of total dose in MOS devices under different gate bias. The intent is to obtain closed-form solutions that can be used in circuit simulation. Expressions are derived for the aging effects of very low dose rate radiation over long time periods.

  5. Analytical model of coincidence resolving time in TOF-PET.

    Science.gov (United States)

    Wieczorek, H; Thon, A; Dey, T; Khanin, V; Rodnyi, P

    2016-06-21

    The coincidence resolving time (CRT) of scintillation detectors is the parameter determining noise reduction in time-of-flight PET. We derive an analytical CRT model based on the statistical distribution of photons for two different prototype scintillators. For the first one, characterized by single exponential decay, CRT is proportional to the decay time and inversely proportional to the number of photons, with a square root dependence on the trigger level. For the second scintillator prototype, characterized by exponential rise and decay, CRT is proportional to the square root of the product of rise time and decay time divided by the doubled number of photons, and it is nearly independent of the trigger level. This theory is verified by measurements of scintillation time constants, light yield and CRT on scintillator sticks. Trapping effects are taken into account by defining an effective decay time. We show that in terms of signal-to-noise ratio, CRT is as important as patient dose, imaging time or PET system sensitivity. The noise reduction effect of better timing resolution is verified and visualized by Monte Carlo simulation of a NEMA image quality phantom.

  6. An analytical study of various telecomminication networks using markov models

    Science.gov (United States)

    Ramakrishnan, M.; Jayamani, E.; Ezhumalai, P.

    2015-04-01

    The main aim of this paper is to examine issues relating to the performance of various Telecommunication networks, and applied queuing theory for better design and improved efficiency. Firstly, giving an analytical study of queues deals with quantifying the phenomenon of waiting lines using representative measures of performances, such as average queue length (on average number of customers in the queue), average waiting time in queue (on average time to wait) and average facility utilization (proportion of time the service facility is in use). In the second, using Matlab simulator, summarizes the finding of the investigations, from which and where we obtain results and describing methodology for a) compare the waiting time and average number of messages in the queue in M/M/1 and M/M/2 queues b) Compare the performance of M/M/1 and M/D/1 queues and study the effect of increasing the number of servers on the blocking probability M/M/k/k queue model.

  7. A Bayesian design space for analytical methods based on multivariate models and predictions.

    Science.gov (United States)

    Lebrun, Pierre; Boulanger, Bruno; Debrus, Benjamin; Lambert, Philippe; Hubert, Philippe

    2013-01-01

    The International Conference for Harmonization (ICH) has released regulatory guidelines for pharmaceutical development. In the document ICH Q8, the design space of a process is presented as the set of factor settings providing satisfactory results. However, ICH Q8 does not propose any practical methodology to define, derive, and compute design space. In parallel, in the last decades, it has been observed that the diversity and the quality of analytical methods have evolved exponentially, allowing substantial gains in selectivity and sensitivity. However, there is still a lack of a rationale toward the development of robust separation methods in a systematic way. Applying ICH Q8 to analytical methods provides a methodology for predicting a region of the space of factors in which results will be reliable. Combining design of experiments and Bayesian standard multivariate regression, an identified form of the predictive distribution of a new response vector has been identified and used, under noninformative as well as informative prior distributions of the parameters. From the responses and their predictive distribution, various critical quality attributes can be easily derived. This Bayesian framework was then extended to the multicriteria setting to estimate the predictive probability that several critical quality attributes will be jointly achieved in the future use of an analytical method. An example based on a high-performance liquid chromatography (HPLC) method is given. For this example, a constrained sampling scheme was applied to ensure the modeled responses have desirable properties.

  8. A preliminary factor analytic investigation into the firstorder factor structure of the Fifteen Factor Plus (15FQ+ on a sample of Black South African managers

    Directory of Open Access Journals (Sweden)

    Seretse Moyo

    2011-03-01

    Full Text Available Orientation: The Fifteen Factor Questionnaire Plus (15FQ+ is a prominent personality questionnaire that organisations frequently use in personnel selection in South Africa.Research purpose: The primary objective of this study was to undertake a factor analytic investigation of the first-order factor structure of the 15FQ+.Motivation for the study: The construct validity of the 15FQ+, as a measure of personality, is necessary even though it is insufficient to justify its use in personnel selection.Research design, approach and method: The researchers evaluated the fit of the measurement model, which the structure and scoring key of the 15FQ+ implies, in a quantitative study that used an ex post facto correlation design through structural equation modelling. They conducted a secondary data analysis. They selected a sample of 241 Black South African managers from a large 15FQ+ database.Main findings: The researchers found good measurement model fit. The measurement model parameter estimates were worrying. The magnitude of the estimated model parameters suggests that the items generally do not reflect the latent personality dimensions the designers intended them to with a great degree of precision. The items are reasonably noisy measures of the latent variables they represent.Practical/managerial implications: Organisations should use the 15FQ+ carefully on Black South African managers until further local research evidence becomes available.Contribution/value-add: The study is a catalyst to trigger the necessary additional research we need to establish convincingly the psychometric credentials of the 15FQ+ as a valuable assessment tool in South Africa.

  9. Numerical and Analytical Modeling of Transit Timing Variations

    Science.gov (United States)

    Hadden, Sam; Lithwick, Yoram

    2016-09-01

    We develop and apply methods to extract planet masses and eccentricities from observed transit timing variations (TTVs). First, we derive simple analytic expressions for the TTV that include the effects of both first- and second-order resonances. Second, we use N-body Markov chain Monte Carlo simulations, as well as the analytic formulae, to measure the masses and eccentricities of 10 planets discovered by Kepler that have not previously been analyzed. Most of the 10 planets have low densities. Using the analytic expressions to partially circumvent degeneracies, we measure small eccentricities of a few percent or less.

  10. Numerical and Analytical Modelling of Transit Time Variations

    CERN Document Server

    Hadden, Sam

    2015-01-01

    We develop and apply methods to extract planet masses and eccentricities from observed transit time variations (TTVs). First, we derive simple analytic expressions for the TTV that include the effects of both first- and second-order resonances. Second, we use N-body Markov chain Monte Carlo (MCMC) simulations, as well as the analytic formulae, to measure the masses and eccentricities of ten planets discovered by Kepler that have not previously been analyzed. Most of the ten planets have low densities. Using the analytic expressions to partially circumvent degeneracies, we measure small eccentricities of a few percent or less.

  11. A UNIVERSAL ANALYTIC POTENTIAL-ENERGY FUNCTION BASED ON A PHASE FACTOR

    Institute of Scientific and Technical Information of China (English)

    C.F. Yu; K. Yan; D.Z. Liu

    2006-01-01

    Using a field equation with a phase factor, a universal analytic potential-energy function applied to the interactions between diatoms or molecules is derived, and five kinds of potential curves of common shapes are obtained adjusting the phase factors. The linear thermal expansion coefficients and Young's moduli of eleven kinds of fuce-centered cubic (fcc) metals - Al, Cu, Ag, etc. Are calculated using the potential-energy function; the computational results are quite consistent with experimental values. Moreover, an analytic relation between the linear thermal expansion coefficients and Young's moduli of fcc metals is given using the potential-energy function. Finally, the force constants of fifty-five kinds of diatomic moleculars with low excitation state are computed using this theory, and they are quite consistent with RKR (Rydberg-Klein-Rees) experimental values.

  12. CD-HPF: New habitability score via data analytic modeling

    Science.gov (United States)

    Bora, K.; Saha, S.; Agrawal, S.; Safonova, M.; Routh, S.; Narasimhamurthy, A.

    2016-10-01

    The search for life on the planets outside the Solar System can be broadly classified into the following: looking for Earth-like conditions or the planets similar to the Earth (Earth similarity), and looking for the possibility of life in a form known or unknown to us (habitability). The two frequently used indices, Earth Similarity Index (ESI) and Planetary Habitability Index (PHI), describe heuristic methods to score habitability in the efforts to categorize different exoplanets (or exomoons). ESI, in particular, considers Earth as the reference frame for habitability, and is a quick screening tool to categorize and measure physical similarity of any planetary body with the Earth. The PHI assesses the potential habitability of any given planet, and is based on the essential requirements of known life: presence of a stable and protected substrate, energy, appropriate chemistry and a liquid medium. We propose here a different metric, a Cobb-Douglas Habitability Score (CDHS), based on Cobb-Douglas habitability production function (CD-HPF), which computes the habitability score by using measured and estimated planetary input parameters. As an initial set, we used radius, density, escape velocity and surface temperature of a planet. The values of the input parameters are normalized to the Earth Units (EU). The proposed metric, with exponents accounting for metric elasticity, is endowed with analytical properties that ensure global optima, and scales up to accommodate finitely many input parameters. The model is elastic, and, as we discovered, the standard PHI turns out to be a special case of the CDHS. Computed CDHS scores are fed to K-NN (K-Nearest Neighbor) classification algorithm with probabilistic herding that facilitates the assignment of exoplanets to appropriate classes via supervised feature learning methods, producing granular clusters of habitability. The proposed work describes a decision-theoretical model using the power of convex optimization and

  13. Analytic results for planar three-loop integrals for massive form factors

    Science.gov (United States)

    Henn, Johannes M.; Smirnov, Alexander V.; Smirnov, Vladimir A.

    2016-12-01

    We use the method of differential equations to analytically evaluate all planar three-loop Feynman integrals relevant for form factor calculations involving massive particles. Our results for ninety master integrals at general q 2 are expressed in terms of multiple polylogarithms, and results for fiftyone master integrals at the threshold q 2 = 4 m 2 are expressed in terms of multiple polylogarithms of argument one, with indices equal to zero or to a sixth root of unity.

  14. Analytic results for planar three-loop integrals for massive form factors

    CERN Document Server

    Henn, Johannes M; Smirnov, Vladimir A

    2016-01-01

    We use the method of differential equations to analytically evaluate all planar three-loop Feynman integrals relevant for form factor calculations involving massive particles. Our results for ninety master integrals at general $q^2$ are expressed in terms of multiple polylogarithms, and results for fiftyone master integrals at the threshold $q^2=4m^2$ are expressed in terms of multiple polylogarithms of argument one, with indices equal to zero or to a sixth root of unity.

  15. An analytical model for annular flow boiling heat transfer in microchannel heat sinks

    Energy Technology Data Exchange (ETDEWEB)

    Megahed, A.; Hassan, I. [Concordia University, Montreal, QC (Canada). Dept. of Mechanical and Industrial Engineering

    2009-07-01

    An analytical model has been developed to predict flow boiling heat transfer coefficient in microchannel heat sinks. The new analytical model is proposed to predict the two-phase heat transfer coefficient during annular flow regime based on the separated model. Opposing to the majority of annular flow heat transfer models, the model is based on fundamental conservation principles. The model considers the characteristics of microchannel heat sink during annular flow and eliminates using any empirical closure relations. Comparison with limited experimental data was found to validate the usefulness of this analytical model. The model predicts the experimental data with a mean absolute error 8%. (author)

  16. Analytical model of impact disruption of satellites and asteroids

    Science.gov (United States)

    Leliwa-Kopystyński, J.; Włodarczyk, I.; Burchell, M. J.

    2016-04-01

    A model of impact disruption of the bodies with sizes from the laboratory scale to that of an order of 100 km is developed. On the lowermost end of the target size the model is based on the numerous laboratory data related to the mass-velocity distribution of the impact produced fragments. On the minor-planets scale the model is supported by the data related to the largest observed craters on small icy satellites and on some asteroids (Leliwa-Kopystynski, J., Burchell, M.J., Lowen, D. [2008]. Icarus 195, 817-826). The model takes into account the target disruption and the dispersion of the impact produced fragments against the intermolecular forces acting on the surfaces of the contacts of the fragments and against self-gravitation of the target. The head-on collisions of non-rotating and non-porous targets and impactors are considered. The impactor delivers kinetic energy but its mass is neglected in comparison to mass of the target. For this simple case the analytical formulae for specific disruption energy as well as for specific energy of formation of the largest craters are found. They depend on a set of parameters. Of these the most important (i.e. with the greatest influence on the final result) are three rather weakly known parameters. They are: (i) The exponent γ in the distribution function of the fragments. (ii) The characteristic velocity v0 that appears in the velocity distribution of the ejected fragments. (iii) The exponent β in the mass-velocity distribution. The influence of the choice of the numerical values of these parameters on the final results has been studied. Another group of parameters contains the relevant material data. They are: (a) The energy σ of breaking of the intermolecular bonds of the target material per unit of the fragment surface and (b) the density ρ of the target. According to our calculations the transition between the strength regime and the gravitational regime is in the range of the target radius from ∼0.4 km to

  17. Analytical dispersion model for the chain of primary and secondary air pollutants released from point source

    Science.gov (United States)

    Juodis, Laurynas; Filistovič, Vitold; Maceika, Evaldas; Remeikis, Vidmantas

    2016-03-01

    An analytical model for dispersion of air pollutants released from a point source forming a secondary pollutant (e.g. chemical transformation or parent-daughter radionuclide chain) is formulated considering the constant wind speed and eddy diffusivities as an explicit function of downwind distance from the source in Cauchy (reflection-deposition type) boundary conditions. The dispersion of pollutants has been investigated by using the Gaussian plume dispersion parameters σy and σz instead of the diffusivity parameters Ky and Kz. For primary pollutant it was proposed to use the derived dry deposition factor instead of the source depletion alternative. An analytical solution for steady-state two-dimensional pollutant transport in the atmosphere is presented. Derived formulas include dependency from effective release height, gravitational and dry deposition velocities of primary and secondary pollutants, advection, surface roughness length and empirical dispersion parameters σy and σz. Demonstration of analytical solution application is provided by calculation of 135Xe and 135C air activity concentrations and the applicability of the model for the solution of atmospheric pollution transport problems.

  18. ASVCP quality assurance guidelines: control of general analytical factors in veterinary laboratories.

    Science.gov (United States)

    Flatland, Bente; Freeman, Kathy P; Friedrichs, Kristen R; Vap, Linda M; Getzy, Karen M; Evans, Ellen W; Harr, Kendal E

    2010-09-01

    Owing to lack of governmental regulation of veterinary laboratory performance, veterinarians ideally should demonstrate a commitment to self-monitoring and regulation of laboratory performance from within the profession. In response to member concerns about quality management in veterinary laboratories, the American Society for Veterinary Clinical Pathology (ASVCP) formed a Quality Assurance and Laboratory Standards (QAS) committee in 1996. This committee recently published updated and peer-reviewed Quality Assurance Guidelines on the ASVCP website. The Quality Assurance Guidelines are intended for use by veterinary diagnostic laboratories and veterinary research laboratories that are not covered by the US Food and Drug Administration Good Laboratory Practice standards (Code of Federal Regulations Title 21, Chapter 58). The guidelines have been divided into 3 reports on 1) general analytic factors for veterinary laboratory performance and comparisons, 2) hematology and hemostasis, and 3) clinical chemistry, endocrine assessment, and urinalysis. This report documents recommendations for control of general analytical factors within veterinary clinical laboratories and is based on section 2.1 (Analytical Factors Important In Veterinary Clinical Pathology, General) of the newly revised ASVCP QAS Guidelines. These guidelines are not intended to be all-inclusive; rather, they provide minimum guidelines for quality assurance and quality control for veterinary laboratory testing. It is hoped that these guidelines will provide a basis for laboratories to assess their current practices, determine areas for improvement, and guide continuing professional development and education efforts.

  19. What is Impulse Buying? An analytical network processing framework for prioritizing factors affecting impulse buying

    Directory of Open Access Journals (Sweden)

    Javad Siahkali Moradi

    2012-08-01

    Full Text Available One of the most important issues affecting profitability is to determine the impact of different factors influencing purchasing activities. In this paper, we perform an extensive literature survey to detect different purchasing factors influencing customers' behavior. The factors are categorized in three different groups and they are ranked using analytical network process. The results of our survey indicate that three factors of personal, product and situational play important roles in purchasing impulse. The personal item includes different factors where demographic characteristic factors receive the highest ranking (35% followed by other factors are feelings, excitement and fun, self identify, education and novelty. There are also three sub-factors associated with demographic characteristics including gender, age and race and the weights are 0.46748, 0.42668 and 0.10584, respectively, which means gender is the most important factor followed by age and race. Finally, the other factor is associated with situational factors' group, which includes presence of others, culture, design of store, time available, local market condition, sales staff and self service with the relative importance of 0.04296, 0.08733, 0.12130, 0.22217, 0.05643, 0.15346 and 0.31635, respectively.

  20. Analytical Model based on Green Criteria for Optical Backbone Network Interconnection

    DEFF Research Database (Denmark)

    Gutierrez Lopez, Jose Manuel; Riaz, M. Tahir; Pedersen, Jens Myrup

    2011-01-01

    to the evaluation of the environmental impact of networks from physical interconnection point of view. Networks deployment, usage, and disposal are analyzed as contributing elements to ICT’s (Information and Communications Technology) CO2 emissions. This paper presents an analytical model for evaluating...... and quantifying the CO2 emissions of optical backbone networks during their lifetime. The main goal of this work is to present the model and illustrate how to evaluate the physical interconnection of backbones from an environmental perspective. This model can be applied as a new type of decision support criteria...... for backbone’s interconnection, since minimization of CO2 emissions is becoming an important factor. In addition, two case studies are presented to illustrate the use and application of this model, and the need for de facto and international standards to reduce CO2 emissions through good network planning....

  1. Shell model and spectroscopic factors

    Energy Technology Data Exchange (ETDEWEB)

    Poves, P. [Madrid Univ. Autonoma and IFT, UAM/CSIC, E-28049 (Spain)

    2007-07-01

    In these lectures, I introduce the notion of spectroscopic factor in the shell model context. A brief review is given of the present status of the large scale applications of the Interacting Shell Model. The spectroscopic factors and the spectroscopic strength are discussed for nuclei in the vicinity of magic closures and for deformed nuclei. (author)

  2. Program package for constructing analytical models of industrial robots

    Energy Technology Data Exchange (ETDEWEB)

    Vukobratovich, M.; Kirchanskiy, N.

    Complex multidimensional nonlinear dynamic systems are controlled with the use of control computers differing in their complexity, from large ones at the level of the modeling of the dynamics of the system and synthesis of the control algorithm to microcomputers directly controlling the system. One of the main decisive problems in controlling an industrial robot is the generation of a dynamic on-line model. For this purpose, a separate microcomputer or several computers operating in the multiprocessor mode are used. The existing methods of robot dynamics simulation which are based on the equations of Newton-Euler, Lagrange and others require a large number of numerical operations and they cannot be realized in real time: the time spent on the construction of a model is several times greater than that acceptable for the computer. This is explained by the following factors: complexity of the mathematical model, the use of a high-level language for programming, the desire to construct an algorithm of a general kind, which leads to high redundancy of numerical operations; the use of recursion relations, which excludes the possibility of performing parallel operations during the realization in a computer. Special characteristics of the construction of a program system which is to a considerable degree free of the above drawbacks is considered below. Instead of directly constructing a model in the numerical form on the basis of one of the approaches of classical mechanics, the concept of constructing a model in symbols is proposed here. It is possible to show that in this way it is possible to obtain a compact mathematical model which requires fewer numerical operations (multiplication, addition) for its realization by two orders in comparison with the methods used earlier. 9 references, 2 tables.

  3. A genetic algorithm-based job scheduling model for big data analytics.

    Science.gov (United States)

    Lu, Qinghua; Li, Shanshan; Zhang, Weishan; Zhang, Lei

    Big data analytics (BDA) applications are a new category of software applications that process large amounts of data using scalable parallel processing infrastructure to obtain hidden value. Hadoop is the most mature open-source big data analytics framework, which implements the MapReduce programming model to process big data with MapReduce jobs. Big data analytics jobs are often continuous and not mutually separated. The existing work mainly focuses on executing jobs in sequence, which are often inefficient and consume high energy. In this paper, we propose a genetic algorithm-based job scheduling model for big data analytics applications to improve the efficiency of big data analytics. To implement the job scheduling model, we leverage an estimation module to predict the performance of clusters when executing analytics jobs. We have evaluated the proposed job scheduling model in terms of feasibility and accuracy.

  4. The cyclical component factor model

    DEFF Research Database (Denmark)

    Dahl, Christian Møller; Hansen, Henrik; Smidt, John

    Forecasting using factor models based on large data sets have received ample attention due to the models' ability to increase forecast accuracy with respect to a range of key macroeconomic variables in the US and the UK. However, forecasts based on such factor models do not uniformly outperform...... the simple autoregressive model when using data from other countries. In this paper we propose to estimate the factors based on the pure cyclical components of the series entering the large data set. Monte Carlo evidence and an empirical illustration using Danish data shows that this procedure can indeed...

  5. Thermal analytic model of current gain for bipolar junction transistor-bipolar static induction transistor compound device

    Institute of Scientific and Technical Information of China (English)

    Zhang You-Run; Zhang Bo; Li Ze-Hong; Lai Chang-Jin; Li Zhao-Ji

    2009-01-01

    This paper proposes a thermal analytical model of current gain for bipolar junction transistor-bipolar static induction transistor (BJT-BSIT) compound device in the low current operation. It also proposes a best thermal compensating factor to the compound device that indicates the relationship between the thermal variation rate of current gain and device structure. This is important for the design of compound device to be optimized. Finally, the analytical model is found to be in good agreement with numerical simulation and experimental results. The test results demonstrate that thermal variation rate of current gain is below 10% in 25℃C-85℃ and 20% in -55℃-25℃.

  6. An analytical model for the influence of contact resistance on thermoelectric efficiency

    CERN Document Server

    Bjørk, R

    2016-01-01

    An analytical model is presented that can account for both electrical and hot and cold thermal contact resistances when calculating the efficiency of a thermoelectric generator. The model is compared to a numerical model of a thermoelectric leg, for 16 different thermoelectric materials, as well as the analytical models of Ebling et. al. (2010) and Min \\& Rowe (1992). The model presented here is shown to accurately calculate the efficiency for all systems and all contact resistances considered, with an average difference in efficiency between the numerical model and the analytical model of $-0.07\\pm0.35$ pp. This makes the model more accurate than previously published models. The maximum absolute difference in efficiency between the analytical model and the numerical model is 1.14 pp for all materials and all contact resistances considered.

  7. Constraints on the $\\omega\\pi$ form factor from analyticity and unitarity

    CERN Document Server

    Ananthanarayan, B; Kubis, B

    2014-01-01

    Motivated by the discrepancies noted recently between the theoretical calculations of the electromagnetic $\\omega\\pi$ form factor and certain experimental data, we investigate this form factor using analyticity and unitarity in a framework known as the method of unitarity bounds. We use a QCD correlator computed on the spacelike axis by operator product expansion and perturbative QCD as input, and exploit the unitarity of its spectral function, including the two-pion contribution that can be reliably calculated using high-precision data on the pion form factor, as well as narrow isoscalar vector meson states. From this information, we derive upper and lower bounds on the modulus of the form factor in the elastic region. The results provide a significant check on those obtained with standard dispersion relations, confirming the existence of a disagreement with experimental data in the region around 0.6 GeV.

  8. Ranking factors affecting the quality of banking services using analytic network process

    Directory of Open Access Journals (Sweden)

    Hooman Pourmohammad

    2016-06-01

    Full Text Available This paper seeks to identify the priority of factors affecting the quality of banking services in Bank Saderat Iran for better allocation of resources to enhance the quality of its banking services. The study develops a fuzzy method to handle uncertainty associated with the data and using analytical network process (ANP ranks different factors influencing on service quality. The results have indicated that the quality of e-services (ESQ is the most important factor followed by the quality of banking services agility (ASQ, the service system quality (SSQ, and the behavioral service qualities (BSQ. Moreover, the employees’ competence and skills, the reliability of the electronic system and the reliability of the service system, an impeccability banking system integrity and accountability instruments are among other effective factors influencing on the quality of banking services.

  9. Prioritizing of effective factors on development of medicinal plants cultivation using analytic network process

    Directory of Open Access Journals (Sweden)

    Ghorbanali Rassam

    2014-07-01

    Full Text Available For the overall development of medicinal plants cultivation in Iran, there is a need to identify various effective factors on medicinal plant cultivation. A proper method for identifying the most effective factor on the development of the medicinal plants cultivation is essential. This research conducted in order to prioritizing of the effective criteria for the development of medicinal plant cultivation in North Khorasan province in Iran using Analytical Network Process (ANP method. The multi-criteria decision making (MCDM is suggested to be a viable method for factor selection and the analytic network process (ANP has been used as a tool for MCDM. For this purpose a list of effective factors offered to expert group. Then pair wise comparison questionnaires were distributed between relevant researchers and local producer experts of province to get their opinions about the priority of criteria and sub- criteria. The questionnaires were analyzed using Super Decision software. We illustrated the use of the ANP by ranking main effective factors such as economic, educational-extension services, cultural-social and supportive policies on development of medicinal plants. The main objective of the present study was to develop ANP as a decision making tool for prioritizing factors affecting the development of medicinal plants cultivation. Results showed that the ANP methodology was perfectly suited to tackling the complex interrelations involved in selection factor in this case. Also the results of the process revealed that among the factors, supporting the cultivation of medicinal plants, build the infrastructure for marketing support, having educated farmer and easy access to production input have most impact on the development of medicinal plant cultivation.

  10. Quantitative, comprehensive, analytical model for magnetic reconnection in Hall magnetohydrodynamics.

    Science.gov (United States)

    Simakov, Andrei N; Chacón, L

    2008-09-05

    Dissipation-independent, or "fast", magnetic reconnection has been observed computationally in Hall magnetohydrodynamics (MHD) and predicted analytically in electron MHD. However, a quantitative analytical theory of reconnection valid for arbitrary ion inertial lengths, d{i}, has been lacking and is proposed here for the first time. The theory describes a two-dimensional reconnection diffusion region, provides expressions for reconnection rates, and derives a formal criterion for fast reconnection in terms of dissipation parameters and d{i}. It also confirms the electron MHD prediction that both open and elongated diffusion regions allow fast reconnection, and reveals strong dependence of the reconnection rates on d{i}.

  11. Modeling of closed-loop recycling liquid-liquid chromatography: Analytical solutions and model analysis.

    Science.gov (United States)

    Kostanyan, Artak E

    2015-08-07

    In closed-loop recycling (CLR) chromatography, the effluent from the outlet of a column is directly returned into the column through the sample feed line and continuously recycled until the required separation is reached. To select optimal operating conditions for the separation of a given feed mixture, an appropriate mathematical description of the process is required. This work is concerned with the analysis of models for the CLR separations. Due to the effect of counteracting mechanisms on separation of solutes, analytical solutions of the models could be helpful to understand and optimize chromatographic processes. The objective of this work was to develop analytical expressions to describe the CLR counter-current (liquid-liquid) chromatography (CCC). The equilibrium dispersion and cell models were used to describe the transport and separation of solutes inside a CLR CCC column. The Laplace transformation is applied to solve the model equations. Several possible CLR chromatography methods for the binary and complex mixture separations are simulated.

  12. Galaxies in the EAGLE hydrodynamical simulation and in the Durham and Munich semi-analytical models

    Science.gov (United States)

    Guo, Quan; Gonzalez-Perez, Violeta; Guo, Qi; Schaller, Matthieu; Furlong, Michelle; Bower, Richard G.; Cole, Shaun; Crain, Robert A.; Frenk, Carlos S.; Helly, John C.; Lacey, Cedric G.; Lagos, Claudia del P.; Mitchell, Peter; Schaye, Joop; Theuns, Tom

    2016-10-01

    We compare global predictions from the EAGLE hydrodynamical simulation, and two semi-analytic (SA) models of galaxy formation, L-GALAXIES and GALFORM. All three models include the key physical processes for the formation and evolution of galaxies and their parameters are calibrated against a small number of observables at z ≈ 0. The two SA models have been applied to merger trees constructed from the EAGLE dark matter only simulation. We find that at z ≤ 2, both the galaxy stellar mass functions for stellar masses M* EAGLE and L-GALAXIES there are more central passive galaxies with M* EAGLE is a factor of ≈1.5 steeper than for the two SA models. The median sizes for galaxies with M* > 109.5 M⊙ differ in some instances by an order of magnitude, while the stellar mass-size relation in EAGLE is a factor of ≈2 tighter than for the two SA models. Our results suggest the need for a revision of how SA models treat the effect of baryonic self-gravity on the underlying dark matter. The treatment of gas flows in the models needs to be revised based on detailed comparison with observations to understand in particular the evolution of the stellar mass-metallicity relation.

  13. AN ANALYTIC MODEL FOR TRANSIENT COLLISIONAL X-RAY LASERS

    Institute of Scientific and Technical Information of China (English)

    LI YING-JUN; ZHANG JIE; TENG Al-PING

    2001-01-01

    A set of similarity equations is derived to describe the hydrodynamics of transient X-ray lasers from slab plasmas generated by combined irradiation of nanosecond and picosecond laser pulses. By separating nanosecond and picosecond laser heating processes into different periods, analytical solutions are obtained for the similarity equations. The calculated results are in agreement with numerical simulations and experimental data.

  14. An analytical model for soil-atmosphere feedback

    NARCIS (Netherlands)

    Schaefli, B.; Van der Ent, R.J.; Woods, R.; Savenije, H.H.G.

    2012-01-01

    Soil-atmosphere feedback is a key for understanding the hydrological cycle and the direction of potential system changes. This paper presents an analytical framework to study the interplay between soil and atmospheric moisture, using as input only the boundary conditions at the upstream end of traje

  15. Disc instabilities and semi-analytic modelling of galaxy formation

    CERN Document Server

    Athanassoula, E

    2008-01-01

    The Efstathiou, Lake and Negroponte (1982) criterion can not distinguish bar stable from bar unstable discs and thus should not be used in semi-analytic galaxy formation simulations. I discuss the reasons for this, illustrate it with examples and point out shortcomings in the recipes used for spheroid formation. I propose an alternative, although much less straightforward, possibility.

  16. Prevalence of risk factors for stuttering among boys: analytical cross-sectional study

    Directory of Open Access Journals (Sweden)

    Cristiane Moço Canhetti Oliveira

    Full Text Available CONTEXT AND OBJECTIVE:There have been few studies on the risk factors for subgroups of stuttering. The aim of this study was to characterize the risk factors for developmental familial stuttering among boys who stutter and who do not stutter, such as disfluency types, associated quality and communication factors, emotional and physical stress, familial attitudes and personal reactions.DESIGN AND SETTING:Analytical cross-sectional study with a control group, performed at the Fluency Studies Laboratory of the Department of Speech and Hearing Disorders of a public university.METHODS: The parents of 40 age-matched stuttering and non-stuttering boys took part in this study. The participants were divided into two groups: stuttering children (SC and non-stuttering children (NSC, with ages between 6 years 0 months and 11 years 11 months. Initially, all of the participants underwent a fluency assessment and then data were gathered using the Protocol for the Risk of Developmental Stuttering.RESULTS:There were no differences in the physical stress distribution factors and personal reactions between the groups. Inappropriate familial attitudes were presented by 95% of the SC and 30% of the NSC. Four risk factors analyzed were not shown by the NSC, namely stuttering-like disfluency, quality factors, physical stress and emotional stresses.CONCLUSIONS:The findings suggest that the presence of stuttering-like disfluency, associated quality and communication factors, emotional stress and inappropriate family attitudes are important risk factors for familial developmental stuttering among boys.

  17. Prevalence of risk factors for stuttering among boys: analytical cross-sectional study.

    Science.gov (United States)

    Oliveira, Cristiane Moço Canhetti; Nogueira, Paula Roberta

    2014-01-01

    There have been few studies on the risk factors for subgroups of stuttering. The aim of this study was to characterize the risk factors for developmental familial stuttering among boys who stutter and who do not stutter, such as disfluency types, associated quality and communication factors, emotional and physical stress, familial attitudes and personal reactions. Analytical cross-sectional study with a control group, performed at the Fluency Studies Laboratory of the Department of Speech and Hearing Disorders of a public university. The parents of 40 age-matched stuttering and non-stuttering boys took part in this study. The participants were divided into two groups: stuttering children (SC) and non-stuttering children (NSC), with ages between 6 years 0 months and 11 years 11 months. Initially, all of the participants underwent a fluency assessment and then data were gathered using the Protocol for the Risk of Developmental Stuttering. There were no differences in the physical stress distribution factors and personal reactions between the groups. Inappropriate familial attitudes were presented by 95% of the SC and 30% of the NSC. Four risk factors analyzed were not shown by the NSC, namely stuttering-like disfluency, quality factors, physical stress and emotional stresses. The findings suggest that the presence of stuttering-like disfluency, associated quality and communication factors, emotional stress and inappropriate family attitudes are important risk factors for familial developmental stuttering among boys.

  18. Toward a definition of intolerance of uncertainty: a review of factor analytical studies of the Intolerance of Uncertainty Scale.

    Science.gov (United States)

    Birrell, Jane; Meares, Kevin; Wilkinson, Andrew; Freeston, Mark

    2011-11-01

    Since its emergence in the early 1990s, a narrow but concentrated body of research has developed examining the role of intolerance of uncertainty (IU) in worry, and yet we still know little about its phenomenology. In an attempt to clarify our understanding of this construct, this paper traces the way in which our understanding and definition of IU have evolved throughout the literature. This paper also aims to further our understanding of IU by exploring the latent variables measures by the Intolerance of Uncertainty Scale (IUS; Freeston, Rheaume, Letarte, Dugas & Ladouceur, 1994). A review of the literature surrounding IU confirmed that the current definitions are categorical and lack specificity. A critical review of existing factor analytic studies was carried out in order to determine the underlying factors measured by the IUS. Systematic searches yielded 9 papers for review. Two factors with 12 consistent items emerged throughout the exploratory studies, and the stability of models containing these two factors was demonstrated in subsequent confirmatory studies. It is proposed that these factors represent (i) desire for predictability and an active engagement in seeking certainty, and (ii) paralysis of cognition and action in the face of uncertainty. It is suggested that these factors may represent approach and avoidance responses to uncertainty. Further research is required to confirm the construct validity of these factors and to determine the stability of this structure within clinical samples.

  19. Modelling a flows in supply chain with analytical models: Case of a chemical industry

    Science.gov (United States)

    Benhida, Khalid; Azougagh, Yassine; Elfezazi, Said

    2016-02-01

    This study is interested on the modelling of the logistics flows in a supply chain composed on a production sites and a logistics platform. The contribution of this research is to develop an analytical model (integrated linear programming model), based on a case study of a real company operating in the phosphate field, considering a various constraints in this supply chain to resolve the planning problems for a better decision-making. The objectives of this model is to determine and define the optimal quantities of different products to route, to and from the various entities in the supply chain studied.

  20. Analytical Model of Water Flow in Coal with Active Matrix

    Science.gov (United States)

    Siemek, Jakub; Stopa, Jerzy

    2014-12-01

    This paper presents new analytical model of gas-water flow in coal seams in one dimension with emphasis on interactions between water flowing in cleats and coal matrix. Coal as a flowing system, can be viewed as a solid organic material consisting of two flow subsystems: a microporous matrix and a system of interconnected macropores and fractures. Most of gas is accumulated in the microporous matrix, where the primary flow mechanism is diffusion. Fractures and cleats existing in coal play an important role as a transportation system for macro scale flow of water and gas governed by Darcy's law. The coal matrix can imbibe water under capillary forces leading to exchange of mass between fractures and coal matrix. In this paper new partial differential equation for water saturation in fractures has been formulated, respecting mass exchange between coal matrix and fractures. Exact analytical solution has been obtained using the method of characteristics. The final solution has very simple form that may be useful for practical engineering calculations. It was observed that the rate of exchange of mass between the fractures and the coal matrix is governed by an expression which is analogous to the Newton cooling law known from theory of heat exchange, but in present case the mass transfer coefficient depends not only on coal and fluid properties but also on time and position. The constant term of mass transfer coefficient depends on relation between micro porosity and macro porosity of coal, capillary forces, and microporous structure of coal matrix. This term can be expressed theoretically or obtained experimentally. W artykule zaprezentowano nowy model matematyczny przepływu wody i gazu w jednowymiarowej warstwie węglowej z uwzględnieniem wymiany masy między systemem szczelin i matrycą węglową. Węgiel jako system przepływowy traktowany jest jako układ o podwójnej porowatości i przepuszczalności, składający się z mikroporowatej matrycy węglowej oraz z

  1. An analytical model of beam attenuation and powder heating during coaxial laser direct metal deposition

    Science.gov (United States)

    Pinkerton, Andrew J.

    2007-12-01

    In the laser direct metal deposition process, interaction between the laser beam and powder from a coaxial powder delivery nozzle alters the temperature of powder and the amount and spatial distribution of laser intensity reaching the deposition melt pool. These factors significantly affect the process and are also important input parameters for any finite element or analytical models of the melt pool and deposition tracks. The analytical model in this paper presents a method to calculate laser attenuation and powder temperatures at every point below such a nozzle. It is applicable to laser beams that are approximately parallel over the beam-powder interaction distance of any initial intensity distribution (Top Hat, Gaussian, TEM01ast or other). The volume below the nozzle is divided into the region above the powder consolidation plane, where the powder stream is annular, and below it, where it is a single Gaussian stream, and expressions derived for each region. Modelled and measured results are reasonably matched. Results indicate that attenuation is more severe once the annular powder stream has consolidated into a single stream but is not zero before that point. The temperature of powder reaching any point is not constant but the mean value is a maximum at the centre of the stream.

  2. A Hybrid Analytical/Simulation Modeling Approach for Planning and Optimizing Mass Tactical Airborne Operations

    Science.gov (United States)

    1995-05-01

    A HYBRID ANALYTICAL/ SIMULATION MODELING APPROACH FOR PLANNING AND OPTIMIZING MASS TACTICAL AIRBORNE OPERATIONS by DAVID DOUGLAS BRIGGS M.S.B.A...COVERED MAY 1995 TECHNICAL REPORT THESIS 4. TITLE AND SUBTITLE 5. FUNDING NUMBERS A HYBRID ANALYTICAL SIMULATION MODELING APPROACH FOR PLANNING AND...are present. Thus, simulation modeling presents itself as an excellent alternate tool for planning because it allows for the modeling of highly complex

  3. A simple analytical aerodynamic model of Langley Winged-Cone Aerospace Plane concept

    Science.gov (United States)

    Pamadi, Bandu N.

    1994-01-01

    A simple three DOF analytical aerodynamic model of the Langley Winged-Coned Aerospace Plane concept is presented in a form suitable for simulation, trajectory optimization, and guidance and control studies. The analytical model is especially suitable for methods based on variational calculus. Analytical expressions are presented for lift, drag, and pitching moment coefficients from subsonic to hypersonic Mach numbers and angles of attack up to +/- 20 deg. This analytical model has break points at Mach numbers of 1.0, 1.4, 4.0, and 6.0. Across these Mach number break points, the lift, drag, and pitching moment coefficients are made continuous but their derivatives are not. There are no break points in angle of attack. The effect of control surface deflection is not considered. The present analytical model compares well with the APAS calculations and wind tunnel test data for most angles of attack and Mach numbers.

  4. The use of analytical models in human-computer interface design

    Science.gov (United States)

    Gugerty, Leo

    1993-01-01

    Recently, a large number of human-computer interface (HCI) researchers have investigated building analytical models of the user, which are often implemented as computer models. These models simulate the cognitive processes and task knowledge of the user in ways that allow a researcher or designer to estimate various aspects of an interface's usability, such as when user errors are likely to occur. This information can lead to design improvements. Analytical models can supplement design guidelines by providing designers rigorous ways of analyzing the information-processing requirements of specific tasks (i.e., task analysis). These models offer the potential of improving early designs and replacing some of the early phases of usability testing, thus reducing the cost of interface design. This paper describes some of the many analytical models that are currently being developed and evaluates the usefulness of analytical models for human-computer interface design. This paper will focus on computational, analytical models, such as the GOMS model, rather than less formal, verbal models, because the more exact predictions and task descriptions of computational models may be useful to designers. The paper also discusses some of the practical requirements for using analytical models in complex design organizations such as NASA.

  5. An analytical formalism to calculate phantom scatter factors for flattening filter free (FFF) mode photon beams.

    Science.gov (United States)

    Chung, Heeteak; Prado, Karl L; Yi, Byong Yong

    2014-02-21

    Phantom Scatter Factors, Sp in the Khan formalism (Khan et al 1980 J. Radiat. Oncol. Biol. Phys. 6 745-51) describe medium-induced changes in photon-beam intensity as a function of size of the beam. According to the British Journal of Radiology, Supplement 25, megavoltage phantom scatter factors are invariant as a function of photon-beam energy. However, during the commissioning of an accelerator with flattening filter free (FFF) photon beams (Varian TrueBeam(TM) 6-MV FFF and 10-MV FFF), differences were noted in phantom scatter between the filtered beams and FFF-mode beams. The purpose of this work was to evaluate this difference and provide an analytical formalism to explain the phantom scatter differences between FFF-mode and the filtered mode. An analytical formalism was devised to demonstrate the source of phantom scatter differences between the filtered and the FFF-mode beams. The reason for the differences in the phantom scatter factors between the filtered and the FFF-mode beams is hypothesized to be the non-uniform beam profiles of the FFF-mode beams. The analytical formalism proposed here is based on this idea, taking the product of the filtered phantom scatter factors and the ratio of the off-axis ratio between the FFF-mode and the filtered beams. All measurements were performed using a Varian TrueBeam(TM) linear accelerator with photon energies of 6-MV and 10-MV in both filtered and FFF-modes. For all measurements, a PTW Farmer type chamber and a Scanditronix CC04 cylindrical ionization were used. The in-water measurements were made at depth dose maximum and 100 cm source-to-axis distance. The in-air measurements were done at 100 cm source-to-axis distance with appropriate build-up cap. From these measurements, the phantom scatter factors were derived for the filtered beams and the FFF-mode beams for both energies to be evaluated against the phantoms scatter factors calculated using the proposed algorithm. For 6-MV, the difference between the measured

  6. IT vendor selection model by using structural equation model & analytical hierarchy process

    Science.gov (United States)

    Maitra, Sarit; Dominic, P. D. D.

    2012-11-01

    Selecting and evaluating the right vendors is imperative for an organization's global marketplace competitiveness. Improper selection and evaluation of potential vendors can dwarf an organization's supply chain performance. Numerous studies have demonstrated that firms consider multiple criteria when selecting key vendors. This research intends to develop a new hybrid model for vendor selection process with better decision making. The new proposed model provides a suitable tool for assisting decision makers and managers to make the right decisions and select the most suitable vendor. This paper proposes a Hybrid model based on Structural Equation Model (SEM) and Analytical Hierarchy Process (AHP) for long-term strategic vendor selection problems. The five steps framework of the model has been designed after the thorough literature study. The proposed hybrid model will be applied using a real life case study to assess its effectiveness. In addition, What-if analysis technique will be used for model validation purpose.

  7. Reverse transcription-polymerase chain reaction molecular testing of cytology specimens: Pre-analytic and analytic factors.

    Science.gov (United States)

    Bridge, Julia A

    2017-01-01

    The introduction of molecular testing into cytopathology laboratory practice has expanded the types of samples considered feasible for identifying genetic alterations that play an essential role in cancer diagnosis and treatment. Reverse transcription-polymerase chain reaction (RT-PCR), a sensitive and specific technical approach for amplifying a defined segment of RNA after it has been reverse-transcribed into its DNA complement, is commonly used in clinical practice for the identification of recurrent or tumor-specific fusion gene events. Real-time RT-PCR (quantitative RT-PCR), a technical variation, also permits the quantitation of products generated during each cycle of the polymerase chain reaction process. This review addresses qualitative and quantitative pre-analytic and analytic considerations of RT-PCR as they relate to various cytologic specimens. An understanding of these aspects of genetic testing is central to attaining optimal results in the face of the challenges that cytology specimens may present. Cancer Cytopathol 2017;125:11-19. © 2016 American Cancer Society.

  8. Analytic Models for Radiation Induced Loss in Optical Fibers II. A Physical Model,

    Science.gov (United States)

    1984-06-01

    and identify by Mock number) PIEL GRUP UB.GR. Optical fibers Analytical models Radiation effects 19. ABSTRACT (ConinueII. anl mwr,f fneciua,, and...conditions specified in the derivation of the equations existed during the irradiations. This is because the functional form of the equations is not...tion is not necessarily incorrect. If one assumes a relatively simple form of re- covery as a function of time, such as an exponential recovery, it can

  9. On improving analytical models of cosmic reionization for matching numerical simulation

    CERN Document Server

    Kaurov, Alexander A

    2015-01-01

    The methods for studying the epoch of cosmic reionization vary from full radiative transfer simulations to purely analytical models. While numerical approaches are computationally expensive and are not suitable for generating many mock catalogs, analytical methods are based on assumptions and approximations. We explore the interconnection between both methods. First, we ask how the analytical framework of excursion set formalism can be used for statistical analysis of numerical simulations and visual representation of the morphology of ionization fronts. Second, we explore the methods of training the analytical model on a given numerical simulation. We present a new code which emerged from this study. Its main application is to match the analytical model with a numerical simulation. Then, it allows one to generate mock reionization catalogs with volumes exceeding the original simulation quickly and computationally inexpensively, meanwhile reproducing large scale statistical properties. These mock catalogs are...

  10. Risk factor detection for heart disease by applying text analytics in electronic medical records.

    Science.gov (United States)

    Torii, Manabu; Fan, Jung-Wei; Yang, Wei-Li; Lee, Theodore; Wiley, Matthew T; Zisook, Daniel S; Huang, Yang

    2015-12-01

    In the United States, about 600,000 people die of heart disease every year. The annual cost of care services, medications, and lost productivity reportedly exceeds 108.9 billion dollars. Effective disease risk assessment is critical to prevention, care, and treatment planning. Recent advancements in text analytics have opened up new possibilities of using the rich information in electronic medical records (EMRs) to identify relevant risk factors. The 2014 i2b2/UTHealth Challenge brought together researchers and practitioners of clinical natural language processing (NLP) to tackle the identification of heart disease risk factors reported in EMRs. We participated in this track and developed an NLP system by leveraging existing tools and resources, both public and proprietary. Our system was a hybrid of several machine-learning and rule-based components. The system achieved an overall F1 score of 0.9185, with a recall of 0.9409 and a precision of 0.8972.

  11. Analysis of 10B by PIGE with factor analytical gamma-ray peak identification.

    Science.gov (United States)

    Savolainen, S; Räisänen, J; Eteläniemi, V; Abo Ramadan, U A; Kallio, M

    1995-09-01

    Studying the biodistribution of boronated compounds for B neutron capture therapy (BNCT) requires the accurate detection of low levels of boron (10B) in biological samples. Proton induced gamma-ray emission analysis (PIGE) of 10B was found to be viable in a study of low density lipoprotein (LDL), in tissue and blood samples. However, the method is sensitive to Na present in the samples and can therefore not be used for accurate measurements of 10B concentrations below 5 ppm in samples containing Na. PIGE can be considered to be an appropriate reference method for chemical B analysis. The factor analytical method presented here is the most objective way to separate Na and B peaks from each other, and the factorizing method can be applied in different forms of spectral analysis.

  12. Analytic model of deformation of construction interfaces of rolled control concrete dam

    Institute of Scientific and Technical Information of China (English)

    GU Chong-shi; HUANG Guang-ming; LAI Dao-ping

    2007-01-01

    The construction interfaces of RCCD have a distinct influence on the deformation of dams. The characters and rules on deformation of construction interfaces are studied. The methods simulating the deformation of the interfaces at different stages are proposed. A thickness analytic model and a no-thickness analytic model of construction interfaces are built. These models can reflect the elastic deformation, the attenuation creep deformation, the irreversible creep deformation and the accelerating creep deformation of interfaces. The example shows that these proposed models can simulate the deformation of the dam structure objectively. Especially, the results of the thickness analytic model which simulates the gradual changing regularities of interfaces can tally with those of monitoring in situ preferably. The methods proposed and the analytic models can be generalized and applied to general concrete dams, especially to the analysis on deformation rules of fault and interlayer in dam base.

  13. An analytical model for cumulative infiltration into a dual-permeability media

    Science.gov (United States)

    Peyrard, Xavier; Lassabatere, Laurent; Angulo-Jaramillo, Rafael; Simunek, Jiri

    2010-05-01

    Modeling of water infiltration into the vadose zone is important for better understanding of movement of water-transported contaminants. There is a great need to take into account the soil heterogeneity and, in particular, the presence of macropores or cracks that could generate preferential flow. Several mathematical models have been proposed to describe unsaturated flow through heterogeneous soils. The dual-permeability model assumes that flow is governed by Richards equation in both porous regions (matrix and fractures). Water can be exchanged between the two regions following a first-order rate law. A previous study showed that the influence of the hydraulic conductivity of the matrix/macropore interface had a little influence on cumulative infiltration at the soil surface. As a result, one could consider the surface infiltration for a specific case of no water exchange between the fracture and matrix regions (a case of zero interfacial hydraulic conductivity). In such a case, water infiltration can be considered to be the sum of the cumulative infiltrations into the matrix and the fractures. On the basis of analytical models for each sub domain (matrix and fractures), an analytical model is proposed for the entire dual-porosity system. A sensitivity analysis is performed to characterize the influence of several factors, such as the saturated hydraulic conductivity ratio, the water pressure scale parameter ratio, and the saturated volumetric water content scale ratio, on the total cumulative infiltration. Such an analysis greatly helps in quantifying the impact of macroporosity and fractures on water infiltration, which can be of great interest for hydrological models.

  14. Effect of Borehole Material on Analytical Solutions of the Heat Transfer Model of Ground Heat Exchangers Considering Groundwater Flow

    Directory of Open Access Journals (Sweden)

    Sangwoo Park

    2016-04-01

    Full Text Available Groundwater flow is one of the most important factors for the design of a ground heat exchanger (GHEX since the thermal environment of the ground around the buried GHEX is significantly affected by heat convection due to the groundwater flow. Several preceding studies have been conducted to develop analytical solutions to the heat transfer model of GHEX with consideration of groundwater flow. One of these solutions is the combined heat transfer model of conduction and convection. However, the developed combined analytical models are inapplicable to all of the configurations of ordinary GHEXs because these solutions assume that the inner part of the borehole is thermally inert or consists of the same material as that of the surrounding ground. In this paper, the applicability of the combined solid cylindrical heat source model, which is the most suitable to energy piles until now, was evaluated by performing a series of numerical analyses. In the numerical analysis, the inner part of the borehole was modeled as two different materials (i.e., permeable ground formation and impermeable fill such as concrete to evaluate applicability of the analytical solution along with different diameter-length (D/L ratios of borehole. In a small value of the D/L ratio, the analytical solution to the combined heat transfer model is in good agreement with the result of numerical analysis. On the other hand, when increasing the D/L ratio, the analytical solution significantly overestimates the effect of groundwater flow on the heat transfer of GHEXs because the analytical solution disregards the existence of the impermeable region in the borehole. Consequently, such tendency is more critical in the GHEX with a large D/L ratio such as large-diameter energy piles.

  15. Matrix Factorizations at Scale: a Comparison of Scientific Data Analytics in Spark and C+MPI Using Three Case Studies

    Energy Technology Data Exchange (ETDEWEB)

    Gittens, Alex; Devarakonda, Aditya; Racah, Evan; Ringenburg, Michael; Gerhardt, Lisa; Kottalam, Jey; Liu, Jialin; Maschhoff, Kristyn; Canon, Shane; Chhugani, Jatin; Sharma, Pramod; Yang, Jiyan; Demmel, James; Harrell, Jim; Krishnamurthy, Venkat; Mahoney, Michael; Prabhat, Mr

    2016-05-12

    We explore the trade-offs of performing linear algebra using Apache Spark, compared to traditional C and MPI implementations on HPC platforms. Spark is designed for data analytics on cluster computing platforms with access to local disks and is optimized for data-parallel tasks. We examine three widely-used and important matrix factorizations: NMF (for physical plausibility), PCA (for its ubiquity) and CX (for data interpretability). We apply these methods to 1.6TB particle physics, 2.2TB and 16TB climate modeling and 1.1TB bioimaging data. The data matrices are tall-and-skinny which enable the algorithms to map conveniently into Spark’s data parallel model. We perform scaling experiments on up to 1600 Cray XC40 nodes, describe the sources of slowdowns, and provide tuning guidance to obtain high performance.

  16. Analytical basis for determining slope lines in grid digital elevation models

    Science.gov (United States)

    Orlandini, Stefano; Moretti, Giovanni; Gavioli, Andrea

    2014-01-01

    An analytical basis for the determination of slope lines in grid digital elevation models is provided by using the D8-LTD method (eight slope directions, least transverse deviation). The D8-LTD method's capability to predict consistently exact slope lines as the grid cell size goes to zero is shown analytically by applying mathematical analysis methods. The use of cumulative, least transverse deviations is found to be the key factor allowing for globally unbiased approximations of slope lines. The D8-LTD method's properties are also demonstrated numerically by using digital elevation models of a synthetic sloping surface obtained from the Himmelblau function. It is shown that slope lines obtained from the D8-LTD method can approximate the exact slope lines as close as desired by selecting a grid cell size that is small enough. In contrast, the standard D8 method is found to produce significantly biased results even when small grid cells are used. The D8-LTD method outperforms the D8 method over a wide range of grid cell sizes (up to 20 m in this application), beyond which grid cell size becomes too large to validly represent the underlying sloping surface. It is therefore concluded that the D8-LTD method should be used in preference to the standard D8 method in order to obtain slope lines that are only limited in reliability by the detail of topographic data, and not by the accuracy of the slope direction method applied.

  17. Predictive analytics technology review: Similarity-based modeling and beyond

    Energy Technology Data Exchange (ETDEWEB)

    Herzog, James; Doan, Don; Gandhi, Devang; Nieman, Bill

    2010-09-15

    Over 11 years ago, SmartSignal introduced Predictive Analytics for eliminating equipment failures, using its patented SBM technology. SmartSignal continues to lead and dominate the market and, in 2010, went one step further and introduced Predictive Diagnostics. Now, SmartSignal is combining Predictive Diagnostics with RCM methodology and industry expertise. FMEA logic reengineers maintenance work management, eliminates unneeded inspections, and focuses efforts on the real issues. This integrated solution significantly lowers maintenance costs, protects against critical asset failures, and improves commercial availability, and reduces work orders 20-40%. Learn how.

  18. An Analytic Hierarchy Process for School Quality and Inspection: Model Development and Application

    Science.gov (United States)

    Al Qubaisi, Amal; Badri, Masood; Mohaidat, Jihad; Al Dhaheri, Hamad; Yang, Guang; Al Rashedi, Asma; Greer, Kenneth

    2016-01-01

    Purpose: The purpose of this paper is to develop an analytic hierarchy planning-based framework to establish criteria weights and to develop a school performance system commonly called school inspections. Design/methodology/approach: The analytic hierarchy process (AHP) model uses pairwise comparisons and a measurement scale to generate the…

  19. A semi-analytical model for productivity testing of complex well configurations

    NARCIS (Netherlands)

    Fokker, P.A.; Brouwer, G.K.; Verga, F.; Ferrero, D.

    2006-01-01

    This paper presents a semi-analytical method for the modeling of productivity testing of vertical, horizontal or multilateral wells. The method, which is applicable to both oil and gas reservoirs, automatically accounts for well interference. The use of analytical expressions ensures proper handling

  20. An Analytic Hierarchy Process for School Quality and Inspection: Model Development and Application

    Science.gov (United States)

    Al Qubaisi, Amal; Badri, Masood; Mohaidat, Jihad; Al Dhaheri, Hamad; Yang, Guang; Al Rashedi, Asma; Greer, Kenneth

    2016-01-01

    Purpose: The purpose of this paper is to develop an analytic hierarchy planning-based framework to establish criteria weights and to develop a school performance system commonly called school inspections. Design/methodology/approach: The analytic hierarchy process (AHP) model uses pairwise comparisons and a measurement scale to generate the…

  1. An Analytical Hierarchy Process Model for the Evaluation of College Experimental Teaching Quality

    Science.gov (United States)

    Yin, Qingli

    2013-01-01

    Taking into account the characteristics of college experimental teaching, through investigaton and analysis, evaluation indices and an Analytical Hierarchy Process (AHP) model of experimental teaching quality have been established following the analytical hierarchy process method, and the evaluation indices have been given reasonable weights. An…

  2. A new spatial coherence model and analytical coefficients for multi-support response spectrum combination

    Institute of Scientific and Technical Information of China (English)

    Wang Junjie; Chen Hu

    2007-01-01

    In this paper, a new spatial coherence model of seismic ground motions is proposed by a fitting procedure. The analytical expressions of modal combination (correlation) coefficients of structural response are developed for multi-support seismic excitations. The coefficients from both the numerical integration and analytical solutions are compared to verify the accuracy of the solutions. It is shown that the analytical expressions of numerical modal combination coefficients are of high accuracy. The results of random responses of an example bridge show that the analytical modal combination coefficients developed in this paper are accurate enough to meet the requirements needed in practice. In addition, the computational efficiency of the analytical solutions of the modal combination coefficients is demonstrated by the response computation of the example bridge. It is found that the time required for the structural response analysis by using the analytical modal combination coefficients is less than 1/20 of that using numerical integral methods.

  3. Analytical solution of the Gross-Neveu model at finite density

    CERN Document Server

    Thies, M

    2003-01-01

    Recent numerical calculations have shown that the ground state of the Gross-Neveu model at finite density is a crystal. Guided by these results, we can now present the analytical solution to this problem in terms of elliptic functions. The scalar potential is the superpotential of the non-relativistic Lame Hamiltonian. This model can also serve as analytically solvable toy model for a relativistic superconductor in the Larkin-Ovchinnikov-Fulde-Ferrell phase.

  4. Validation of a Four-Factor Model of Career Indecision

    Science.gov (United States)

    Brown, Steven D.; Hacker, Jason; Abrams, Matthew; Carr, Andrea; Rector, Christopher; Lamp, Kristen; Telander, Kyle; Siena, Anne

    2012-01-01

    Two studies were designed to explore whether a meta-analytically derived four-factor model of career indecision (Brown & Rector, 2008) could be replicated at the primary and secondary data levels. In the first study, an initial pool of 167 items was written based on 35 different instruments whose scores had loaded saliently on at least one…

  5. Validation of a Four-Factor Model of Career Indecision

    Science.gov (United States)

    Brown, Steven D.; Hacker, Jason; Abrams, Matthew; Carr, Andrea; Rector, Christopher; Lamp, Kristen; Telander, Kyle; Siena, Anne

    2012-01-01

    Two studies were designed to explore whether a meta-analytically derived four-factor model of career indecision (Brown & Rector, 2008) could be replicated at the primary and secondary data levels. In the first study, an initial pool of 167 items was written based on 35 different instruments whose scores had loaded saliently on at least one…

  6. Evaluation of Analytical Modeling Functions for the Phonation Onset Process.

    Science.gov (United States)

    Petermann, Simon; Kniesburges, Stefan; Ziethe, Anke; Schützenberger, Anne; Döllinger, Michael

    2016-01-01

    The human voice originates from oscillations of the vocal folds in the larynx. The duration of the voice onset (VO), called the voice onset time (VOT), is currently under investigation as a clinical indicator for correct laryngeal functionality. Different analytical approaches for computing the VOT based on endoscopic imaging were compared to determine the most reliable method to quantify automatically the transient vocal fold oscillations during VO. Transnasal endoscopic imaging in combination with a high-speed camera (8000 fps) was applied to visualize the phonation onset process. Two different definitions of VO interval were investigated. Six analytical functions were tested that approximate the envelope of the filtered or unfiltered glottal area waveform (GAW) during phonation onset. A total of 126 recordings from nine healthy males and 210 recordings from 15 healthy females were evaluated. Three criteria were analyzed to determine the most appropriate computation approach: (1) reliability of the fit function for a correct approximation of VO; (2) consistency represented by the standard deviation of VOT; and (3) accuracy of the approximation of VO. The results suggest the computation of VOT by a fourth-order polynomial approximation in the interval between 32.2 and 67.8% of the saturation amplitude of the filtered GAW.

  7. An analytic equation of state for Ising-like models

    Energy Technology Data Exchange (ETDEWEB)

    O' Connor, Denjoe [School of Theoretical Physics, Dublin Institute for Advanced Studies, 10 Burlington Road, Dublin 4 (Ireland); Santiago, J A [Centro de Investigacion Avanzada en IngenierIa Industrial. Universidad Autonoma del Estado de Hidalgo, Pachuca 42184 (Mexico); Stephens, C R [Instituto de Ciencias Nucleares, Universidad Nacional Autonoma de Mexico, Apartado Postal 70-543, Mexico DF 04510 (Mexico)

    2007-02-02

    Using an environmentally friendly renormalization we derive, from an underlying field theory representation, a formal expression for the equation of state, y = f(x), that exhibits all desired asymptotic and analyticity properties in the three limits x {yields} 0, x {yields} {infinity} and x {yields} -1. The only necessary inputs are the Wilson functions {gamma}{sub {lambda}}, {gamma}{sub {psi}} and {gamma}{sub {phi}{sup 2}}, associated with a renormalization of the transverse vertex functions. These Wilson functions exhibit a crossover between the Wilson-Fisher fixed point and the fixed point that controls the coexistence curve. Restricting to the case N = 1, we derive a one-loop equation of state for 2 < d < 4 naturally parameterized by a ratio of nonlinear scaling fields. For d = 3 we show that a non-parameterized analytic form can be deduced. Various asymptotic amplitudes are calculated directly from the equation of state in all three asymptotic limits of interest and comparison made with known results. By positing a scaling form for the equation of state inspired by the one-loop result, but adjusted to fit the known values of the critical exponents, we obtain better agreement with known asymptotic amplitudes.

  8. Evaluation of Analytical Modeling Functions for the Phonation Onset Process

    Directory of Open Access Journals (Sweden)

    Simon Petermann

    2016-01-01

    Full Text Available The human voice originates from oscillations of the vocal folds in the larynx. The duration of the voice onset (VO, called the voice onset time (VOT, is currently under investigation as a clinical indicator for correct laryngeal functionality. Different analytical approaches for computing the VOT based on endoscopic imaging were compared to determine the most reliable method to quantify automatically the transient vocal fold oscillations during VO. Transnasal endoscopic imaging in combination with a high-speed camera (8000 fps was applied to visualize the phonation onset process. Two different definitions of VO interval were investigated. Six analytical functions were tested that approximate the envelope of the filtered or unfiltered glottal area waveform (GAW during phonation onset. A total of 126 recordings from nine healthy males and 210 recordings from 15 healthy females were evaluated. Three criteria were analyzed to determine the most appropriate computation approach: (1 reliability of the fit function for a correct approximation of VO; (2 consistency represented by the standard deviation of VOT; and (3 accuracy of the approximation of VO. The results suggest the computation of VOT by a fourth-order polynomial approximation in the interval between 32.2 and 67.8% of the saturation amplitude of the filtered GAW.

  9. Developing policy analytics for public health strategy and decisions-the Sheffield alcohol policy model framework.

    Science.gov (United States)

    Brennan, Alan; Meier, Petra; Purshouse, Robin; Rafia, Rachid; Meng, Yang; Hill-Macmanus, Daniel

    This paper sets out the development of a methodological framework for detailed evaluation of public health strategies for alcohol harm reduction to meet UK policy-makers needs. Alcohol is known to cause substantial harms, and controlling its affordability and availability are effective policy options. Analysis and synthesis of a variety of public and commercial data sources is needed to evaluate impact on consumers, health services, crime, employers and industry, so a sound evaluation of impact is important. We discuss the iterative process to engage with stakeholders, identify evidence/data and develop analytic approaches and produce a final model structure. We set out a series of steps in modelling impact including: classification and definition of population subgroups of interest, identification and definition of harms and outcomes for inclusion, classification of modifiable components of risk and their baseline values, specification of the baseline position on policy variables especially prices, estimating effects of changing policy variables on risk factors including price elasticities, quantifying risk functions relating risk factors to harms including 47 health conditions, crimes, absenteeism and unemployment, and monetary valuation. The most difficult model structuring decisions are described, as well as the final results framework used to provide decision support to national level policymakers in the UK. In the discussion we explore issues around the relationship between modelling and policy debates, valuation and scope, limitations of evidence/data, how the framework can be adapted to other countries and decisions. We reflect on the approach taken and outline ongoing plans for further development.

  10. Consistent constitutive modeling of metallic target penetration using empirical, analytical, and numerical penetration models

    Institute of Scientific and Technical Information of China (English)

    John Jack P. RIEGEL III; David DAVISON

    2016-01-01

    Historically, there has been little correlation between the material properties used in (1) empirical formulae, (2) analytical formulations, and (3) numerical models. The various regressions and models may each provide excellent agreement for the depth of penetration into semi-infinite targets. But the input parameters for the empirically based procedures may have little in common with either the analytical model or the numerical model. This paper builds on previous work by Riegel and Anderson (2014) to show how the Effective Flow Stress (EFS) strength model, based on empirical data, can be used as the average flow stress in the analytical Walker–Anderson Penetration model (WAPEN) (Anderson and Walker, 1991) and how the same value may be utilized as an effective von Mises yield strength in numerical hydrocode simulations to predict the depth of penetration for eroding projectiles at impact velocities in the mechanical response regime of the materials. The method has the benefit of allowing the three techniques (empirical, analytical, and numerical) to work in tandem. The empirical method can be used for many shot line calculations, but more advanced analytical or numerical models can be employed when necessary to address specific geometries such as edge effects or layering that are not treated by the simpler methods. Developing complete constitutive relationships for a material can be costly. If the only concern is depth of penetration, such a level of detail may not be required. The effective flow stress can be determined from a small set of depth of penetration experiments in many cases, especially for long penetrators such as the L/D=10 ones considered here, making it a very practical approach. In the process of performing this effort, the authors considered numerical simulations by other researchers based on the same set of experimental data that the authors used for their empirical and analytical assessment. The goals were to establish a baseline with a full

  11. Consistent constitutive modeling of metallic target penetration using empirical, analytical, and numerical penetration models

    Directory of Open Access Journals (Sweden)

    John (Jack P. Riegel III

    2016-04-01

    Full Text Available Historically, there has been little correlation between the material properties used in (1 empirical formulae, (2 analytical formulations, and (3 numerical models. The various regressions and models may each provide excellent agreement for the depth of penetration into semi-infinite targets. But the input parameters for the empirically based procedures may have little in common with either the analytical model or the numerical model. This paper builds on previous work by Riegel and Anderson (2014 to show how the Effective Flow Stress (EFS strength model, based on empirical data, can be used as the average flow stress in the analytical Walker–Anderson Penetration model (WAPEN (Anderson and Walker, 1991 and how the same value may be utilized as an effective von Mises yield strength in numerical hydrocode simulations to predict the depth of penetration for eroding projectiles at impact velocities in the mechanical response regime of the materials. The method has the benefit of allowing the three techniques (empirical, analytical, and numerical to work in tandem. The empirical method can be used for many shot line calculations, but more advanced analytical or numerical models can be employed when necessary to address specific geometries such as edge effects or layering that are not treated by the simpler methods. Developing complete constitutive relationships for a material can be costly. If the only concern is depth of penetration, such a level of detail may not be required. The effective flow stress can be determined from a small set of depth of penetration experiments in many cases, especially for long penetrators such as the L/D = 10 ones considered here, making it a very practical approach. In the process of performing this effort, the authors considered numerical simulations by other researchers based on the same set of experimental data that the authors used for their empirical and analytical assessment. The goals were to establish a

  12. An innovation resistance factor model

    Directory of Open Access Journals (Sweden)

    Siti Salwa Mohd Ishak

    2016-09-01

    Full Text Available The process and implementation strategy of information technology in construction is generally considered through the limiting prism of theoretical contexts generated from innovation diffusion and acceptance. This research argues that more attention should be given to understanding the positive effects of resistance. The study develops a theoretical framing for the Integrated Resistance Factor Model (IRFM. The framing uses a combination of diffusion of innovation theory, technology acceptance model and social network perspective. The model is tested to identify the most significant resistance factors using Partial Least Square (PLS technique. All constructs proposed in the model are found to be significant, valid and consistent with the theoretical framework. IRFM is shown to be an effective and appropriate model of user resistance factors. The most critical factors to influence technology resistance in the online project information management system (OPIMS context are: support from leaders and peers, complexity of the technology, compatibility with key work practices; and pre-trial of the technology before it is actually deployed. The study provides a new model for further research in technology innovation specific to the construction industry.

  13. Numerical Facility: Convergence of Cognitive and Factor Analytic Models

    Science.gov (United States)

    1989-09-30

    Pellegrino & Glaser, 1979; Sternberg, 1977; Sternberg & Gardner, 1983; Vernon, 1983; Vernon, Nador , & Kantor, 1985a). These more contemporary experiments...whereas the latter are not. Vernon and his colleagues (Vernon, 1986; Vernon & Kantor, 1986; Vernon, Nador , & Kantor, 1985b), Numerical Facility 43...10, 315-330. Vernon, P. A., Nador , S., & Kantor, L. (1985a). Group differences in intelligence and speed of information-processing. Intelligence, 9

  14. Analytic model for passively-heated solar houses - 1. theory

    Energy Technology Data Exchange (ETDEWEB)

    Gordon, J.M.; Zarmi, Y.

    1981-01-01

    A simple analytic method for the prediction of the long-term thermal performance of passively-heated solar houses is presented. The treatment includes a new coarse method for ''energy bookkeeping'' and the use of a distribution function which represents the frequency of occurrence of different values of the solar load ratio. As specific examples, the cases of direct gain and water wall houses are treated in detail. Relative to the parameterization of computer simulation results, this method offers the user a design tool that can be used to predict, in closed form, the thermal effect on the house of different building and climatic parameters and is not restricted to a ''reference'' building. 13 refs.

  15. Polymer as a function of monomer: Analytical quantum modeling

    CERN Document Server

    Nakhaee, Mohammad

    2016-01-01

    To identify an analytical relation between the properties of polymers and their's monomer a Metal-Molecule-Metal (MMM) junction has been presented as an interesting and widely used object of research in which the molecule is a polymer which is able to conduct charge. The method used in this study is based on the Green's function approach in the tight-binding approximation using basic properties of matrices. For a polymer base MMM system, transmission, density of states (DOS) and local density of states (LDOS) have been calculated as a function of the hamiltonian of the monomer. After that, we have obtained a frequency for LDOS variations in pass from a subunit to the next one which is a function of energy.

  16. The Prioritization of Clinical Risk Factors of Obstructive Sleep Apnea Severity Using Fuzzy Analytic Hierarchy Process

    Directory of Open Access Journals (Sweden)

    Thaya Maranate

    2015-01-01

    Full Text Available Recently, there has been a problem of shortage of sleep laboratories that can accommodate the patients in a timely manner. Delayed diagnosis and treatment may lead to worse outcomes particularly in patients with severe obstructive sleep apnea (OSA. For this reason, the prioritization in polysomnography (PSG queueing should be endorsed based on disease severity. To date, there have been conflicting data whether clinical information can predict OSA severity. The 1,042 suspected OSA patients underwent diagnostic PSG study at Siriraj Sleep Center during 2010-2011. A total of 113 variables were obtained from sleep questionnaires and anthropometric measurements. The 19 groups of clinical risk factors consisting of 42 variables were categorized into each OSA severity. This study aimed to array these factors by employing Fuzzy Analytic Hierarchy Process approach based on normalized weight vector. The results revealed that the first rank of clinical risk factors in Severe, Moderate, Mild, and No OSA was nighttime symptoms. The overall sensitivity/specificity of the approach to these groups was 92.32%/91.76%, 89.52%/88.18%, 91.08%/84.58%, and 96.49%/81.23%, respectively. We propose that the urgent PSG appointment should include clinical risk factors of Severe OSA group. In addition, the screening for Mild from No OSA patients in sleep center setting using symptoms during sleep is also recommended (sensitivity = 87.12% and specificity = 72.22%.

  17. Comparison of Cardiovascular Risk Factors Between Subjects With and Without Diabetes Mellitus: An Analytical Study

    Directory of Open Access Journals (Sweden)

    Mousavi

    2016-02-01

    Full Text Available Background Cardiovascular Disease (CVD is developing treacherously along industrialization and development of urbanization Objectives The aim of this study was to compare cardiovascular risk factors between subjects with and without diabetes mellitus in the Minoodar district of Qazvin. Patients and Methods This analytical study was conducted on 100 subjects with diabetes and 140 subjects without diabetes in Qazvin from September 2010 to April 2011. Standardized measurements were available for waist circumference (WC, blood pressure (BP, fasting serum cholesterol, high-density lipoprotein cholesterol (HDL, and triglycerides (TGs. Cardiovascular risk factors were defined according to the diagnostic criteria proposed by the national cholesterol education program. Data were analyzed using the t-test, Mann-Whitney U test, and Chi-square test. Results Overall, 12% of subjects with diabetes and 17.9% of subjects without diabetes were smokers (P = 0.277. The WC, TGs, systolic and diastolic BP were significantly higher in subjects with diabetes compared to subjects without diabetes. The prevalence of high WC, high BP, low HDL, and high TGs were significantly higher in subjects with diabetes compared to subjects without diabetes. Conclusions Cardiovascular risk factors were higher in subjects with diabetes compared to subjects without diabetes. Lifestyle intervention programs should be focused on community education about reduction of CVD risk factors in patients with diabetes.

  18. Approximation analytical solutions for a unified plasma sheath model by double decomposition method

    Institute of Scientific and Technical Information of China (English)

    FangJin-Qing

    1998-01-01

    A unified plasma sheath model and its potential equation are proposed.Any higher-order approximation analytical solutions for the unified plasma sheath potential equation are derived by double decomposition method.

  19. A two-dimensional analytical model for short channel junctionless double-gate MOSFETs

    Science.gov (United States)

    Jiang, Chunsheng; Liang, Renrong; Wang, Jing; Xu, Jun

    2015-05-01

    A physics-based analytical model of electrostatic potential for short-channel junctionless double-gate MOSFETs (JLDGMTs) operated in the subthreshold regime is proposed, in which the full two-dimensional (2-D) Poisson's equation is solved in channel region by a method of series expansion similar to Green's function. The expression of the proposed electrostatic potential is completely rigorous and explicit. Based on this expression, analytical models of threshold voltage, subthreshold swing, and subthreshold drain current for JLDGMTs were derived. Subthreshold behavior was studied in detail by changing different device parameters and bias conditions, including doping concentration, channel thickness, gate length, gate oxide thickness, drain voltage, and gate voltage. Results predicted by all the analytical models agree well with numerical solutions from the 2-D simulator. These analytical models can be used to investigate the operating mechanisms of nanoscale JLDGMTs and to optimize their device performance.

  20. An Analytic Model for the Success Rate of a Robotic Actuator System in Hitting Random Targets

    National Research Council Canada - National Science Library

    Bradley, Stuart

    2015-01-01

    .... While simulations and measurements exist for the success rate of hitting targets by some systems, there is a dearth of analytic models which can give insight into, and guidance on optimization, of new robotic systems...

  1. Monetary Policy and Bond Option Pricing in an Analytical RBC Model

    OpenAIRE

    Söderlind, Paul

    2003-01-01

    This paper analyzes how bond option prices are affected by different types of monetary policy. Analytical results from a general equilibrium model with sticky wages show that employment or output targeting typically give lower bond option prices than inflation targeting.

  2. A Path-Analytic Model of Career Indecision.

    Science.gov (United States)

    Hartman, Bruce W.; And Others

    1985-01-01

    Tested a path model reflecting developmental and chronic types of career indecision on counseling students (N=164) and high school students (N=155). Data from both samples supported the model, confirming the role of trait anxiety in career indecision. (JAC)

  3. Fluence correction factors for graphite calorimetry in a low-energy clinical proton beam: I. Analytical and Monte Carlo simulations.

    Science.gov (United States)

    Palmans, H; Al-Sulaiti, L; Andreo, P; Shipley, D; Lühr, A; Bassler, N; Martinkovič, J; Dobrovodský, J; Rossomme, S; Thomas, R A S; Kacperek, A

    2013-05-21

    The conversion of absorbed dose-to-graphite in a graphite phantom to absorbed dose-to-water in a water phantom is performed by water to graphite stopping power ratios. If, however, the charged particle fluence is not equal at equivalent depths in graphite and water, a fluence correction factor, kfl, is required as well. This is particularly relevant to the derivation of absorbed dose-to-water, the quantity of interest in radiotherapy, from a measurement of absorbed dose-to-graphite obtained with a graphite calorimeter. In this work, fluence correction factors for the conversion from dose-to-graphite in a graphite phantom to dose-to-water in a water phantom for 60 MeV mono-energetic protons were calculated using an analytical model and five different Monte Carlo codes (Geant4, FLUKA, MCNPX, SHIELD-HIT and McPTRAN.MEDIA). In general the fluence correction factors are found to be close to unity and the analytical and Monte Carlo codes give consistent values when considering the differences in secondary particle transport. When considering only protons the fluence correction factors are unity at the surface and increase with depth by 0.5% to 1.5% depending on the code. When the fluence of all charged particles is considered, the fluence correction factor is about 0.5% lower than unity at shallow depths predominantly due to the contributions from alpha particles and increases to values above unity near the Bragg peak. Fluence correction factors directly derived from the fluence distributions differential in energy at equivalent depths in water and graphite can be described by kfl = 0.9964 + 0.0024·zw-eq with a relative standard uncertainty of 0.2%. Fluence correction factors derived from a ratio of calculated doses at equivalent depths in water and graphite can be described by kfl = 0.9947 + 0.0024·zw-eq with a relative standard uncertainty of 0.3%. These results are of direct relevance to graphite calorimetry in low-energy protons but given that the fluence

  4. Analytical Model of Planar Double Split Ring Resonator

    DEFF Research Database (Denmark)

    Zhurbenko, Vitaliy; Jensen, Thomas; Krozer, Viktor

    2007-01-01

    This paper focuses on accurate modelling of microstrip double split ring resonators. The impedance matrix representation for coupled lines is applied for the first time to model the SRR, resulting in excellent model accuracy over a wide frequency range. Phase compensation is implemented to take...

  5. An Analytics Approach to Adaptive Maturity Models using Organizational Characteristics

    NARCIS (Netherlands)

    Baars, T.; Mijnhardt, F.; Vlaanderen, K.; Spruit, M.

    2016-01-01

    Ever since the first incarnations of maturity models, critics have voiced several concerns with these frameworks. Indeed, a lack of model fit and oversimplification of the real world can be attributed to the rigidity of these models, which assumes that each organization that uses the framework is

  6. Human factors/ergonomics implications of big data analytics: Chartered Institute of Ergonomics and Human Factors annual lecture.

    Science.gov (United States)

    Drury, Colin G

    2015-01-01

    In recent years, advances in sensor technology, connectedness and computational power have come together to produce huge data-sets. The treatment and analysis of these data-sets is known as big data analytics (BDA), and the somewhat related term data mining. Fields allied to human factors/ergonomics (HFE), e.g. statistics, have developed computational methods to derive meaningful, actionable conclusions from these data bases. This paper examines BDA, often characterised by volume, velocity and variety, giving examples of successful BDA use. This examination provides context by considering examples of using BDA on human data, using BDA in HFE studies, and studies of how people perform BDA. Significant issues for HFE are the reliance of BDA on correlation rather than hypotheses and theory, the ethics of BDA and the use of HFE in data visualisation.

  7. A Predictive Analytic Model for the Solar Modulation of Cosmic Rays

    CERN Document Server

    Cholis, Ilias; Linden, Tim

    2015-01-01

    An important factor limiting our ability to understand the production and propagation of cosmic rays pertains to the effects of heliospheric forces, commonly known as solar modulation. The solar wind is capable of generating time and charge-dependent effects on the spectrum and intensity of low energy ($\\lsim$ 10 GeV) cosmic rays reaching Earth. Previous analytic treatments of solar modulation have utilized the force-field approximation, in which a simple potential is adopted whose amplitude is selected to best fit the cosmic-ray data taken over a given period of time. Making use of recently available cosmic-ray data from the Voyager 1 spacecraft, along with measurements of the heliospheric magnetic field and solar wind, we construct a time, charge and rigidity-dependent model of solar modulation that can be directly compared to data from a variety of cosmic-ray experiments. We provide a simple analytic formula that can be easily utilized in a variety of applications, allowing us to better predict the effects...

  8. An analytical model of the electric field distributions of buried superjunction devices

    Institute of Scientific and Technical Information of China (English)

    Huang Haimeng; Chen Xingbi

    2013-01-01

    An analytical model of the electric field distributions of buried superjunction structures,based on the charge superposition method and Green's function approach,is derived.An accurate approximation of the exact analytical model of the vertical electric field is also proposed and demonstrated by numerical simulation.The influence of the dimension and doping concentration of each layer on the electric field is discussed in detail,and the breakdown voltage is demonstrated by simulations.

  9. Analytical Model-based Fault Detection and Isolation in Control Systems

    DEFF Research Database (Denmark)

    Vukic, Z.; Ozbolt, H.; Blanke, M.

    1998-01-01

    The paper gives an introduction and an overview of the field of fault detection and isolation for control systems. The summary of analytical (quantitative model-based) methodds and their implementation are presented. The focus is given to mthe analytical model-based fault-detection and fault...... diagnosis methods, often viewed as the classical or deterministic ones. Emphasis is placed on the algorithms suitable for ship automation, unmanned underwater vehicles, and other systems of automatic control....

  10. An analytical fiber bundle model for pullout mechanics of root bundles

    Science.gov (United States)

    Cohen, D.; Schwarz, M.; Or, D.

    2011-09-01

    Roots in soil contribute to the mechanical stability of slopes. Estimation of root reinforcement is challenging because roots form complex biological networks whose geometrical and mechanical characteristics are difficult to characterize. Here we describe an analytical model that builds on simple root descriptors to estimate root reinforcement. Root bundles are modeled as bundles of heterogeneous fibers pulled along their long axes neglecting root-soil friction. Analytical expressions for the pullout force as a function of displacement are derived. The maximum pullout force and corresponding critical displacement are either derived analytically or computed numerically. Key model inputs are a root diameter distribution (uniform, Weibull, or lognormal) and three empirical power law relations describing tensile strength, elastic modulus, and length of roots as functions of root diameter. When a root bundle with root tips anchored in the soil matrix is pulled by a rigid plate, a unique parameter, ?, that depends only on the exponents of the power law relations, dictates the order in which roots of different diameters break. If ? 1, large roots break first. When ? = 1, all fibers break simultaneously, and the maximum tensile force is simply the roots' mean force times the number of roots in the bundle. Based on measurements of root geometry and mechanical properties, the value of ? is less than 1, usually ranging between 0 and 0.7. Thus, small roots always fail first. The model shows how geometrical and mechanical characteristics of roots and root diameter distribution affect the pullout force, its maximum and corresponding displacement. Comparing bundles of roots that have similar mean diameters, a bundle with a narrow variance in root diameter will result in a larger maximum force and a smaller displacement at maximum force than a bundle with a wide diameter distribution. Increasing the mean root diameter of a bundle without changing the distribution's shape increases

  11. Team mental models: techniques, methods, and analytic approaches.

    Science.gov (United States)

    Langan-Fox, J; Code, S; Langfield-Smith, K

    2000-01-01

    Effective team functioning requires the existence of a shared or team mental model among members of a team. However, the best method for measuring team mental models is unclear. Methods reported vary in terms of how mental model content is elicited and analyzed or represented. We review the strengths and weaknesses of vatrious methods that have been used to elicit, represent, and analyze individual and team mental models and provide recommendations for method selection and development. We describe the nature of mental models and review techniques that have been used to elicit and represent them. We focus on a case study on selecting a method to examine team mental models in industry. The processes involved in the selection and development of an appropriate method for eliciting, representing, and analyzing team mental models are described. The criteria for method selection were (a) applicability to the problem under investigation; (b) practical considerations - suitability for collecting data from the targeted research sample; and (c) theoretical rationale - the assumption that associative networks in memory are a basis for the development of mental models. We provide an evaluation of the method matched to the research problem and make recommendations for future research. The practical applications of this research include the provision of a technique for analyzing team mental models in organizations, the development of methods and processes for eliciting a mental model from research participants in their normal work environment, and a survey of available methodologies for mental model research.

  12. Galaxies in the EAGLE hydrodynamical simulation and in the Durham and Munich semi-analytical models

    CERN Document Server

    Guo, Quan; Guo, Qi; Schaller, Matthieu; Furlong, Michelle; Bower, Richard G; Cole, Shaun; Crain, Robert A; Frenk, Carlos S; Helly, John C; Lacey, Cedric G; Lagos, Claudia del P; Mitchell, Peter; Schaye, Joop; Theuns, Tom

    2015-01-01

    We compare global predictions from the EAGLE hydrodynamical simulation, and two semi-analytic (SA) models of galaxy formation, L-GALAXIES and GALFORM. All three models include the key physical processes considered to be essential for the formation and evolution of galaxies and their parameters are calibrated against a small number of observables at $z\\approx 0$. The two SA models have been applied to merger trees constructed from the EAGLE dark matter only simulation. GALFORM has been run with two prescriptions for the ram pressure stripping of hot gas from satellites: instantaneous or gradual stripping. We find that at $z\\leq 2$, both the galaxy stellar mass functions for stellar masses $M_{*} 10^{9.5} {\\rm M}_{\\odot}$ differ in some instances by an order of magnitude, while the stellar mass-size relation in EAGLE is a factor of $\\approx 2$ tighter than for the two SA models. Our results suggest the need for a revision of the galactic wind treatment in SA models and of the effect that the baryonic self-grav...

  13. Systematic comparison of beta spectra calculations using improved analytical screening correction with experimental shape factors.

    Science.gov (United States)

    Mougeot, X

    2016-03-01

    From a review of the available literature, a database of experimental shape factors from measured beta spectra was created in previous work. Classical assumptions applied in beta spectra calculations which avoid the determination of the electron and nuclear wave functions were tested by comparison with each measured spectrum present in the database. From this systematic comparison, it was demonstrated that the typical assumption λk=1 is inappropriate for all forbidden unique transitions. Moreover, the equally common ξ-approximation was also proved to be incorrect for about half of the listed first forbidden non-unique transitions and for all second non-unique ones. In present work, this study has been performed once again using an improved analytical screening correction. General results from previous study still remain the same. Except for allowed transitions, the mean energies in current nuclear databases are expected to be erroneous. Some selected beta spectra are also given to illustrate these results.

  14. A hybrid analytical model for open-circuit field calculation of multilayer interior permanent magnet machines

    Science.gov (United States)

    Zhang, Zhen; Xia, Changliang; Yan, Yan; Geng, Qiang; Shi, Tingna

    2017-08-01

    Due to the complicated rotor structure and nonlinear saturation of rotor bridges, it is difficult to build a fast and accurate analytical field calculation model for multilayer interior permanent magnet (IPM) machines. In this paper, a hybrid analytical model suitable for the open-circuit field calculation of multilayer IPM machines is proposed by coupling the magnetic equivalent circuit (MEC) method and the subdomain technique. In the proposed analytical model, the rotor magnetic field is calculated by the MEC method based on the Kirchhoff's law, while the field in the stator slot, slot opening and air-gap is calculated by subdomain technique based on the Maxwell's equation. To solve the whole field distribution of the multilayer IPM machines, the coupled boundary conditions on the rotor surface are deduced for the coupling of the rotor MEC and the analytical field distribution of the stator slot, slot opening and air-gap. The hybrid analytical model can be used to calculate the open-circuit air-gap field distribution, back electromotive force (EMF) and cogging torque of multilayer IPM machines. Compared with finite element analysis (FEA), it has the advantages of faster modeling, less computation source occupying and shorter time consuming, and meanwhile achieves the approximate accuracy. The analytical model is helpful and applicable for the open-circuit field calculation of multilayer IPM machines with any size and pole/slot number combination.

  15. Analytic solutions for degenerate Raman-coupled model

    Institute of Scientific and Technical Information of China (English)

    Zhang Zhi-Ming; Yu Ya-Fei

    2008-01-01

    The Raman-coupled interaction between an atom and a single mode of a cavity field is studied. For the cases in which a light field is initially in a coherent state and in a thermal state separately, we have derived the analytic expressions for the time evolutions of atomic population difference W, modulus B of the Bloch vector, and entropy E. We find that the time evolutions of these quantities are periodic with a period of e. The maxima of W and B appear at the scaled interaction time points (τ) = κπ(κ =0, 1, 2,...). At these time points, E = 0, which shows that the atom and the field are not entangled. Between these time points, E ≠ 0, which means that the atom and the field are entangled. When the field is initially in a coherent state, near the maxima, the envelope of W is a Gaussian function with a variance of 1/(4(-n)) ((-n) is the mean number of photons). Under the envelope, W oscillates at a frequency of (-n)/e.When the field is initially in a thermal state, near the maxima, W is a Lorentz function with a width of 1/(-n).

  16. Hybrid Analytical and Data-Driven Modeling for Feed-Forward Robot Control †

    Directory of Open Access Journals (Sweden)

    René Felix Reinhart

    2017-02-01

    Full Text Available Feed-forward model-based control relies on models of the controlled plant, e.g., in robotics on accurate knowledge of manipulator kinematics or dynamics. However, mechanical and analytical models do not capture all aspects of a plant’s intrinsic properties and there remain unmodeled dynamics due to varying parameters, unmodeled friction or soft materials. In this context, machine learning is an alternative suitable technique to extract non-linear plant models from data. However, fully data-based models suffer from inaccuracies as well and are inefficient if they include learning of well known analytical models. This paper thus argues that feed-forward control based on hybrid models comprising an analytical model and a learned error model can significantly improve modeling accuracy. Hybrid modeling here serves the purpose to combine the best of the two modeling worlds. The hybrid modeling methodology is described and the approach is demonstrated for two typical problems in robotics, i.e., inverse kinematics control and computed torque control. The former is performed for a redundant soft robot and the latter for a rigid industrial robot with redundant degrees of freedom, where a complete analytical model is not available for any of the platforms.

  17. Hybrid Analytical and Data-Driven Modeling for Feed-Forward Robot Control †.

    Science.gov (United States)

    Reinhart, René Felix; Shareef, Zeeshan; Steil, Jochen Jakob

    2017-02-08

    Feed-forward model-based control relies on models of the controlled plant, e.g., in robotics on accurate knowledge of manipulator kinematics or dynamics. However, mechanical and analytical models do not capture all aspects of a plant's intrinsic properties and there remain unmodeled dynamics due to varying parameters, unmodeled friction or soft materials. In this context, machine learning is an alternative suitable technique to extract non-linear plant models from data. However, fully data-based models suffer from inaccuracies as well and are inefficient if they include learning of well known analytical models. This paper thus argues that feed-forward control based on hybrid models comprising an analytical model and a learned error model can significantly improve modeling accuracy. Hybrid modeling here serves the purpose to combine the best of the two modeling worlds. The hybrid modeling methodology is described and the approach is demonstrated for two typical problems in robotics, i.e., inverse kinematics control and computed torque control. The former is performed for a redundant soft robot and the latter for a rigid industrial robot with redundant degrees of freedom, where a complete analytical model is not available for any of the platforms.

  18. Hybrid Analytical and Data-Driven Modeling for Feed-Forward Robot Control †

    Science.gov (United States)

    Reinhart, René Felix; Shareef, Zeeshan; Steil, Jochen Jakob

    2017-01-01

    Feed-forward model-based control relies on models of the controlled plant, e.g., in robotics on accurate knowledge of manipulator kinematics or dynamics. However, mechanical and analytical models do not capture all aspects of a plant’s intrinsic properties and there remain unmodeled dynamics due to varying parameters, unmodeled friction or soft materials. In this context, machine learning is an alternative suitable technique to extract non-linear plant models from data. However, fully data-based models suffer from inaccuracies as well and are inefficient if they include learning of well known analytical models. This paper thus argues that feed-forward control based on hybrid models comprising an analytical model and a learned error model can significantly improve modeling accuracy. Hybrid modeling here serves the purpose to combine the best of the two modeling worlds. The hybrid modeling methodology is described and the approach is demonstrated for two typical problems in robotics, i.e., inverse kinematics control and computed torque control. The former is performed for a redundant soft robot and the latter for a rigid industrial robot with redundant degrees of freedom, where a complete analytical model is not available for any of the platforms. PMID:28208697

  19. Performance and analytical modelling of halo-doped surrounding gate MOSFETs

    Institute of Scientific and Technical Information of China (English)

    Li Zun-Chao

    2008-01-01

    Halo structure is added to sub-100 nm surrounding-gate metal--oxide-semiconductor field- effect-transistors (MOSFETs) to suppress short channel effect.This paper develops the analytical surface potential and threshold voltage models based on the solution of Poisson's equation in fully depleted condition for symmetric halo-doped cylindrical surrounding gate MOSFETs.The performance of the halo-doped device is studied and the validity of the analytical models is verified by comparing the analytical results with the simulated data by three dimensional numerical device simulator Davinci.It shows that the halo doping profile exhibits better performance in suppressing threshold voltage roll-off and drain-induced barrier lowering,and increasing carrier transport efficiency.The derived analytical models are in good agreement with Davinci.

  20. Analytic model of acoustic streaming in thermoacoustic waveguides with slowly varying cross-section

    Institute of Scientific and Technical Information of China (English)

    FAN Yuxian; LIU Ke; YANG Jun

    2012-01-01

    An analytic model of acoustic streaming generated in two-dimensional thermoa- coustic waveguides with slowly varying cross-section was developed for more general applica- tions. The analytical solutions of acoustic streaming characteristics in the closed straight tube and the annular tube are given based on the model. The solution for the closed straight tube can be applied to the case with any transverse scale. The solution for the annular tube is obtained under the assumption that the width of the varying cross-section part is much larger than the viscous and thermal penetration depths. The effects of cross-section variation, time-averaged temperature distribution and components of sound field are reflected in the analytic solutions. The magnitude and distribution of acoustic streaming velocity vary with the characteristic scale of the waveguides. The analytic model of acoustic streaming can be applied in research under thermoacoustic and other physical backgrounds.

  1. Energy demand analytics using coupled technological and economic models

    Science.gov (United States)

    Impacts of a range of policy scenarios on end-use energy demand are examined using a coupling of MARKAL, an energy system model with extensive supply and end-use technological detail, with Inforum LIFT, a large-scale model of the us. economy with inter-industry, government, and c...

  2. On the Development of Parameterized Linear Analytical Longitudinal Airship Models

    Science.gov (United States)

    Kulczycki, Eric A.; Johnson, Joseph R.; Bayard, David S.; Elfes, Alberto; Quadrelli, Marco B.

    2008-01-01

    In order to explore Titan, a moon of Saturn, airships must be able to traverse the atmosphere autonomously. To achieve this, an accurate model and accurate control of the vehicle must be developed so that it is understood how the airship will react to specific sets of control inputs. This paper explains how longitudinal aircraft stability derivatives can be used with airship parameters to create a linear model of the airship solely by combining geometric and aerodynamic airship data. This method does not require system identification of the vehicle. All of the required data can be derived from computational fluid dynamics and wind tunnel testing. This alternate method of developing dynamic airship models will reduce time and cost. Results are compared to other stable airship dynamic models to validate the methods. Future work will address a lateral airship model using the same methods.

  3. Bayesian Estimation of Categorical Dynamic Factor Models

    Science.gov (United States)

    Zhang, Zhiyong; Nesselroade, John R.

    2007-01-01

    Dynamic factor models have been used to analyze continuous time series behavioral data. We extend 2 main dynamic factor model variations--the direct autoregressive factor score (DAFS) model and the white noise factor score (WNFS) model--to categorical DAFS and WNFS models in the framework of the underlying variable method and illustrate them with…

  4. Spectral density of the correlation matrix of factor models: a random matrix theory approach.

    Science.gov (United States)

    Lillo, F; Mantegna, R N

    2005-07-01

    We studied the eigenvalue spectral density of the correlation matrix of factor models of multivariate time series. By making use of the random matrix theory, we analytically quantified the effect of statistical uncertainty on the spectral density due to the finiteness of the sample. We considered a broad range of models, ranging from one-factor models to hierarchical multifactor models.

  5. On stratification, barotropic tides, and secular changes in surface tidal elevations: Two-layer analytical models

    CERN Document Server

    Wetzel, Alfredo N; Cerovecki, Ivana; Hendershott, Myrl C; Karsten, Richard H; Miller, Peter D

    2013-01-01

    In this study the influence of stratification on surface tidal elevations in a two-layer analytical model is examined. The model assumes linearized, non-rotating, shallow-water dynamics in one dimension with astronomical forcing and allows for arbitrary topography. Both large scale (barotropic) and small scale (baroclinic) components of the surface tidal elevation are shown to be affected by stratification. It is also shown that the topography and basin boundaries affect the sensitivity of the barotropic surface tide to stratification significantly. In a companion paper it is shown that the barotropic tide in two-layer numerical models run in realistic global domains differs from its value in one-layer numerical models by amounts qualitatively consistent with analytic predictions from this paper. The analytical model also roughly predicts the sensitivity to perturbations in stratification in the two-layer domain model. Taken together, this paper and the companion paper therefore provide a framework to underst...

  6. An analytical model for porous single crystals with ellipsoidal voids

    Science.gov (United States)

    Mbiakop, A.; Constantinescu, A.; Danas, K.

    2015-11-01

    A rate-(in)dependent constitutive model for porous single crystals with arbitrary crystal anisotropy (e.g., FCC, BCC, HCP, etc.) containing general ellipsoidal voids is developed. The proposed model, denoted as modified variational model (MVAR), is based on the nonlinear variational homogenization method, which makes use of a linear comparison porous material to estimate the response of the nonlinear porous single crystal. Periodic multi-void finite element simulations are used in order to validate the MVAR for a large number of parameters including cubic (FCC, BCC) and hexagonal (HCP) crystal anisotropy, various creep exponents (i.e., nonlinearity), several stress triaxiality ratios, general void shapes and orientations and various porosity levels. The MVAR model, which involves a priori no calibration parameters, is found to be in good agreement with the finite element results for all cases considered in the rate-dependent context. The model is then used in a predictive manner to investigate the complex response of porous single crystals in several cases with strong coupling between the anisotropy of the crystal and the (morphological) anisotropy induced by the shape and orientation of the voids. Finally, a simple way of calibrating the MVAR with just two adjustable parameters is depicted in the rate-independent context so that an excellent agreement with the FE simulation results is obtained. In this last case, this proposed model can be thought as a generalization of the Gurson model in the context of porous single crystals and general ellipsoidal void shapes and orientations.

  7. Generalized Semi-Analytical Models of Supernova Light Curves

    CERN Document Server

    Chatzopoulos, Emmanouil; Vinko, Jozsef

    2011-01-01

    We present generalized supernova (SN) light curve (LC) models for a variety of power inputs. We provide an expression for the power input that is produced by self-similar forward and reverse shocks in SN ejecta - circumstellar matter (CSM) interaction. We find that this ejecta-CSM interaction luminosity is in agreement with results from multi-dimensional radiation hydrodynamics simulations in the optically-thin case. We develop a model for the case of an optically-thick CSM by invoking an approximation for the effects of radiative diffusion. In the context of this model, we provide predictions for the time of forward shock break-out from the optically-thick part of the CSM envelope. We also introduce a hybrid LC model that incorporates ejecta-CSM interaction plus Ni-56 and Co-56 radioactive decay input. We fit this hybrid model to the LC of the Super-Luminous Supernova (SLSN) 2006gy. We find that this model provides a better fit to the LC of this event than previously presented models. We also address the rel...

  8. Analytical recovery of protozoan enumeration methods: have drinking water QMRA models corrected or created bias?

    Science.gov (United States)

    Schmidt, P J; Emelko, M B; Thompson, M E

    2013-05-01

    Quantitative microbial risk assessment (QMRA) is a tool to evaluate the potential implications of pathogens in a water supply or other media and is of increasing interest to regulators. In the case of potentially pathogenic protozoa (e.g. Cryptosporidium oocysts and Giardia cysts), it is well known that the methods used to enumerate (oo)cysts in samples of water and other media can have low and highly variable analytical recovery. In these applications, QMRA has evolved from ignoring analytical recovery to addressing it in point-estimates of risk, and then to addressing variation of analytical recovery in Monte Carlo risk assessments. Often, variation of analytical recovery is addressed in exposure assessment by dividing concentration values that were obtained without consideration of analytical recovery by random beta-distributed recovery values. A simple mathematical proof is provided to demonstrate that this conventional approach to address non-constant analytical recovery in drinking water QMRA will lead to overestimation of mean pathogen concentrations. The bias, which can exceed an order of magnitude, is greatest when low analytical recovery values are common. A simulated dataset is analyzed using a diverse set of approaches to obtain distributions representing temporal variation in the oocyst concentration, and mean annual risk is then computed from each concentration distribution using a simple risk model. This illustrative example demonstrates that the bias associated with mishandling non-constant analytical recovery and non-detect samples can cause drinking water systems to be erroneously classified as surpassing risk thresholds.

  9. Formal analytical modeling of blog content as personal narrative

    Science.gov (United States)

    Coombs, Michael J.; Jaenisch, Holger M.; Handley, James W.

    2008-04-01

    This paper contrasts two techniques for analyzing blog content and making use of this information to model blog content. One method uses classical text content and analysis presented for human interpretation. The second method relies on a data mined list of descriptive words characterizing the blogs. We examine the use of different data mining tools, Kryltech's "Subject Search Summarizer", Leximancer, and QUEST, to provide orthogonal and independently generated key word lists. These lists are then converted into Data Models, enabling mathematical modeling of blog content.

  10. Compact objects from gravitational collapse: an analytical toy model

    Energy Technology Data Exchange (ETDEWEB)

    Malafarina, Daniele [Nazarbayev University, Department of Physics, Astana (Kazakhstan); Joshi, Pankaj S. [Tata Institute of Fundamental Research, Mumbai (India)

    2015-12-15

    We develop here a procedure to obtain regular static configurations resulting from dynamical gravitational collapse of a massive matter cloud in general relativity. Under certain general physical assumptions for the collapsing cloud, we find the class of dynamical models that lead to an equilibrium configuration. To illustrate this, we provide a class of perfect fluid collapse models that lead to a static constant density object as limit. We suggest that similar models might possibly constitute the basis for the description of formation of compact objects in nature. (orig.)

  11. Analytical model of the combustion of multicomponent solid propellants

    Science.gov (United States)

    Cohen, N. S.; Price, C. F.; Strand, L. D.

    1977-01-01

    Multiple flame models derived for simple composite propellants are extended to describe the combustion of propellants containing multimodal particle sizes, mixed oxidizers and monopropellant binders. Models combining the component contributions to propellant surface structure, flame structure and energy distribution are based in part upon experimental observations and in part upon hypotheses constrained to provide reasonable agreement with measured burning rate characteristics. The methods employed consist of superposition, interaction and iteration. The computerized model is applied to explain the effects of multiple ingredients and to discuss burning rate tailoring problems of current interest.

  12. Building disc structure and galaxy properties through angular momentum: the DARK SAGE semi-analytic model

    Science.gov (United States)

    Stevens, Adam R. H.; Croton, Darren J.; Mutch, Simon J.

    2016-09-01

    We present the new semi-analytic model of galaxy evolution, DARK SAGE, a heavily modified version of the publicly available SAGE code. The model is designed for detailed evolution of galactic discs. We evolve discs in a series of annuli with fixed specific angular momentum, which allows us to make predictions for the radial and angular-momentum structure of galaxies. Most physical processes, including all channels of star formation and associated feedback, are performed in these annuli. We present the surface density profiles of our model spiral galaxies, both as a function of radius and specific angular momentum, and find that the discs naturally build a pseudo-bulge-like component. Our main results are focused on predictions relating to the integrated mass-specific angular momentum relation of stellar discs. The model produces a distinct sequence between these properties in remarkable agreement with recent observational literature. We investigate the impact Toomre disc instabilities have on shaping this sequence and find they are crucial for regulating both the mass and spin of discs. Without instabilities, high-mass discs would be systematically deficient in specific angular momentum by a factor of ˜2.5, with increased scatter. Instabilities also appear to drive the direction in which the mass-spin sequence of spiral galaxy discs evolves. With them, we find galaxies of fixed mass have higher specific angular momentum at later epochs.

  13. Markov-CA model using analytical hierarchy process and multiregression technique

    Science.gov (United States)

    Omar, N. Q.; Sanusi, S. A. M.; Hussin, W. M. W.; Samat, N.; Mohammed, K. S.

    2014-06-01

    The unprecedented increase in population and rapid rate of urbanisation has led to extensive land use changes. Cellular automata (CA) are increasingly used to simulate a variety of urban dynamics. This paper introduces a new CA based on an integration model built-in multi regression and multi-criteria evaluation to improve the representation of CA transition rule. This multi-criteria evaluation is implemented by utilising data relating to the environmental and socioeconomic factors in the study area in order to produce suitability maps (SMs) using an analytical hierarchical process, which is a well-known method. Before being integrated to generate suitability maps for the periods from 1984 to 2010 based on the different decision makings, which have become conditioned for the next step of CA generation. The suitability maps are compared in order to find the best maps based on the values of the root equation (R2). This comparison can help the stakeholders make better decisions. Thus, the resultant suitability map derives a predefined transition rule for the last step for CA model. The approach used in this study highlights a mechanism for monitoring and evaluating land-use and land-cover changes in Kirkuk city, Iraq owing changes in the structures of governments, wars, and an economic blockade over the past decades. The present study asserts the high applicability and flexibility of Markov-CA model. The results have shown that the model and its interrelated concepts are performing rather well.

  14. Reference dosimetry calculations for neutron capture therapy with comparison of analytical and voxel models.

    Science.gov (United States)

    Goorley, J T; Kiger, W S; Zamenhof, R G

    2002-02-01

    As clinical trials of Neutron Capture Therapy (NCT) are initiated in the U.S. and other countries, new treatment planning codes are being developed to calculate detailed dose distributions in patient-specific models. The thorough evaluation and comparison of treatment planning codes is a critical step toward the eventual standardization of dosimetry, which, in turn, is an essential element for the rational comparison of clinical results from different institutions. In this paper we report development of a reference suite of computational test problems for NCT dosimetry and discuss common issues encountered in these calculations to facilitate quantitative evaluations and comparisons of NCT treatment planning codes. Specifically, detailed depth-kerma rate curves were calculated using the Monte Carlo radiation transport code MCNP4B for four different representations of the modified Snyder head phantom, an analytic, multishell, ellipsoidal model, and voxel representations of this model with cubic voxel sizes of 16, 8, and 4 mm. Monoenergetic and monodirectional beams of 0.0253 eV, 1, 2, 10, 100, and 1000 keV neutrons, and 0.2, 0.5, 1, 2, 5, and 10 MeV photons were individually simulated to calculate kerma rates to a statistical uncertainty of neutron beam with a broad neutron spectrum, similar to epithermal beams currently used or proposed for NCT clinical trials, was computed for all models. The thermal neutron, fast neutron, and photon kerma rates calculated with the 4 and 8 mm voxel models were within 2% and 4%, respectively, of those calculated for the analytical model. The 16 mm voxel model produced unacceptably large discrepancies for all dose components. The effects from different kerma data sets and tissue compositions were evaluated. Updating the kerma data from ICRU 46 to ICRU 63 data produced less than 2% difference in kerma rate profiles. The depth-dose profile data, Monte Carlo code input, kerma factors, and model construction files are available

  15. Force 2025 and Beyond Strategic Force Design Analytic Model

    Science.gov (United States)

    2017-01-12

    list and start and end times of each task. Table 1 shows the basic data needed for our example model in the AMD unit and mission space. Table 1... basically two parts; an objective (or functional) hierarchy linking the overall objective through sub-objectives (or tasks) to attributes (or required...used with any popular algebraic modeling and solver software, including packages such as pyomo in Python or lpSolve in R using the lp_solve solver

  16. Cake filtration modeling: Analytical cake filtration model and filter medium characterization

    Energy Technology Data Exchange (ETDEWEB)

    Koch, Michael

    2008-05-15

    Cake filtration is a unit operation to separate solids from fluids in industrial processes. The build up of a filter cake is usually accompanied with a decrease in overall permeability over the filter leading to an increased pressure drop over the filter. For an incompressible filter cake that builds up on a homogeneous filter cloth, a linear pressure drop profile over time is expected for a constant fluid volume flow. However, experiments show curved pressure drop profiles, which are also attributed to inhomogeneities of the filter (filter medium and/or residual filter cake). In this work, a mathematical filter model is developed to describe the relationship between time and overall permeability. The model considers a filter with an inhomogeneous permeability and accounts for fluid mechanics by a one-dimensional formulation of Darcy's law and for the cake build up by solid continuity. The model can be solved analytically in the time domain. The analytic solution allows for the unambiguous inversion of the model to determine the inhomogeneous permeability from the time resolved overall permeability, e.g. pressure drop measurements. An error estimation of the method is provided by rewriting the model as convolution transformation. This method is applied to simulated and experimental pressure drop data of gas filters with textile filter cloths and various situations with non-uniform flow situations in practical problems are explored. A routine is developed to generate characteristic filter cycles from semi-continuous filter plant operation. The model is modified to investigate the impact of non-uniform dust concentrations. (author). 34 refs., 40 figs., 1 tab

  17. Analytic model for the dynamic Z-pinch

    Energy Technology Data Exchange (ETDEWEB)

    Piriz, A. R., E-mail: roberto.piriz@uclm.es; Sun, Y. B. [E. T. S. I. Industriales, CYTEMA, and Instituto de Investigaciones Energéticas (INEI), Universidad de Castilla-La Mancha, 13071 Ciudad Real (Spain); Tahir, N. A. [GSI Helmholtzzentrum für Schwerionenforschung, Planckstrasse 1, 64291 Darmstadt (Germany)

    2015-06-15

    A model is presented for describing the cylindrical implosion of a shock wave driven by an accelerated piston. It is based in the identification of the acceleration of the shocked mass with the acceleration of the piston. The model yields the separate paths of the piston and the shock. In addition, by considering that the shocked region evolves isentropically, the approximate profiles of all the magnitudes in the shocked region are obtained. The application to the dynamic Z-pinch is presented and the results are compared with the well known snowplow and slug models which are also derived as limiting cases of the present model. The snowplow model is seen to yield a trajectory in between those of the shock and the piston. Instead, the neglect of the inertial effects in the slug model is seen to produce a too fast implosion, and the pressure uniformity is shown to lead to an unphysical instantaneous piston stopping when the shock arrives to the axis.

  18. Human performance modeling for system of systems analytics :soldier fatigue.

    Energy Technology Data Exchange (ETDEWEB)

    Lawton, Craig R.; Campbell, James E.; Miller, Dwight Peter

    2005-10-01

    The military has identified Human Performance Modeling (HPM) as a significant requirement and challenge of future systems modeling and analysis initiatives as can be seen in the Department of Defense's (DoD) Defense Modeling and Simulation Office's (DMSO) Master Plan (DoD 5000.59-P 1995). To this goal, the military is currently spending millions of dollars on programs devoted to HPM in various military contexts. Examples include the Human Performance Modeling Integration (HPMI) program within the Air Force Research Laboratory, which focuses on integrating HPMs with constructive models of systems (e.g. cockpit simulations) and the Navy's Human Performance Center (HPC) established in September 2003. Nearly all of these initiatives focus on the interface between humans and a single system. This is insufficient in the era of highly complex network centric SoS. This report presents research and development in the area of HPM in a system-of-systems (SoS). Specifically, this report addresses modeling soldier fatigue and the potential impacts soldier fatigue can have on SoS performance.

  19. Analytical model for removal of a uniformly distributed single-component NAPL under nonequilibrium conditions

    NARCIS (Netherlands)

    Brouwers, Jos; Augustijn, Dionysius C.M.

    2001-01-01

    In this paper a simple analytical model is presented for the one-dimensional transport equation describing the removal of a uniformly distributed, single-component NAPL under nonequilibrium conditions. Both advective and dispersive transport are included in the model. The model describes two

  20. An analytical channel thermal noise model for deep-submicron MOSFETs with short channel effects

    Science.gov (United States)

    Jeon, Jongwook; Lee, Jong Duk; Park, Byung-Gook; Shin, Hyungcheol

    2007-07-01

    In this work, an analytical channel thermal noise model for short channel MOSFETs is derived. The transfer function of the noise was derived by following the Tsividis' method. The proposed model takes into account the channel length modulation, velocity saturation, and carrier heating effects in the gradual channel region. Modeling results show good agreements with the measured noise data.

  1. Electromagnetically induced absorption in detuned stub waveguides: a simple analytical and experimental model.

    Science.gov (United States)

    Mouadili, A; Boudouti, E H El; Soltani, A; Talbi, A; Djafari-Rouhani, B; Akjouj, A; Haddadi, K

    2014-12-17

    We give an analytical and experimental demonstration of a classical analogue of the electromagnetic induced absorption (EIA) in a simple photonic device consisting of two stubs of lengths d1 and d2 grafted at the same site along a waveguide. By detuning the lengths of the two stubs (i.e. δ = d(2) - d(1)) we show that: (i) the amplitudes of the electromagnetic waves in the two stubs can be written following the two resonators model where each stub plays the role of a radiative resonator with low Q factor. The destructive interference between the waves in the two stubs may give rise to a sharp resonance peak with high Q factor in the transmission as well as in the absorption. (ii) The transmission coefficient around the resonance induced by the stubs can be written following a Fano-like form. In particular, we give an explicit expression of the position, width and Fano parameter of the resonances as a function of δ. (iii) By taking into account the loss in the waveguides, we show that at the transmission resonance, the transmission (reflection) increases (decreases) as a function of δ. Whereas the absorption goes through a maximum around 0.5 for a threshold value δth which depends on the attenuation in the system and then falls to zero. (iv) We give a comparison between the phase of the determinant of the scattering matrix, the so-called Friedel phase and the phase of the transmission amplitude. (v) The effect of the boundary conditions at the end of the resonators on the EIA resonance is also discussed. The analytical results are obtained by means of the Green's function method, whereas the experiments are carried out using coaxial cables in the radio-frequency regime. These results should have important consequences for designing integrated devices such as narrow-frequency optical or microwave filters and high-speed switches.

  2. Analytical model of LDMOS with a single step buried oxide layer

    Science.gov (United States)

    Yuan, Song; Duan, Baoxing; Cao, Zhen; Guo, Haijun; Yang, Yintang

    2016-09-01

    In this paper, a two-dimensional analytical model is established for the Single-Step Buried Oxide SOI structure proposed by the authors. Based on the two-dimensional Poisson equation, the analytic expression of the surface electric field and potential distributions for the device is achieved. In the SBOSOI (Single-Step Buried Oxide Silicon On Insulator) structure, the buried oxide layer thickness changes stepwise along the drift region, and the electric field in the oxide layer also varies with the different buried oxide layer thickness. These variations will modulate the surface electric field distribution through the electric field modulation effects, which makes the surface electric field distribution more uniform. As a result, the breakdown voltage of the device is improved by 60% compared with the conventional SOI structure. To verify the accuracy of the analytical model, the device simulation software ISE TCAD is utilized, the analytical values are in good agreement with the simulation results by the simulation software. The results verified the established two-dimensional analytical model for SBOSOI structure is valid, and it also illustrates the breakdown voltage enhancement by the electric field modulation effect sufficiently. The established analytical models will provide the physical and mathematical basis for further analysis of the new power devices with the patterned buried oxide layer.

  3. Analytical model of LDMOS with a double step buried oxide layer

    Science.gov (United States)

    Yuan, Song; Duan, Baoxing; Cao, Zhen; Guo, Haijun; Yang, Yintang

    2016-09-01

    In this paper, a two-dimensional analytical model is established for the Buried Oxide Double Step Silicon On Insulator structure proposed by the authors. Based on the two-dimensional Poisson equation, the analytic expressions of the surface electric field and potential distributions for the device are achieved. In the BODS (Buried Oxide Double Step Silicon On Insulator) structure, the buried oxide layer thickness changes stepwise along the drift region, and the positive charge in the drift region can be accumulated at the corner of the step. These accumulated charge function as the space charge in the depleted drift region. At the same time, the electric field in the oxide layer also varies with the different drift region thickness. These variations especially the accumulated charge will modulate the surface electric field distribution through the electric field modulation effects, which makes the surface electric field distribution more uniform. As a result, the breakdown voltage of the device is improved by 30% compared with the conventional SOI structure. To verify the accuracy of the analytical model, the device simulation software ISE TCAD is utilized, the analytical values are in good agreement with the simulation results by the simulation software. That means the established two-dimensional analytical model for BODS structure is valid, and it also illustrates the breakdown voltage enhancement by the electric field modulation effect sufficiently. The established analytical models will provide the physical and mathematical basis for further analysis of the new power devices with the patterned buried oxide layer.

  4. Two-dimensional analytical models for asymmetric fully depleted double-gate strained silicon MOSFETs

    Institute of Scientific and Technical Information of China (English)

    Liu Hong-Xia; Li Jin; Li Bin; Cao Lei; Yuan Bo

    2011-01-01

    This paper develops the simple and accurate two-dimensional analytical models for new asymmetric double-gate fully depleted strained-Si MOSFET. The models mainly include the analytical equations of the surface potential, surface electric field and threshold voltage, which are derived by solving two dimensional Poisson equation in strained-Si layer.The models are verified by numerical simulation. Besides offering the physical insight into device physics in the model,the new structure also provides the basic designing guidance for further immunity of short channel effect and drain-induced barrier-lowering of CMOS-based devices in nanometre scale.

  5. Simple analytic functions for modeling three-dimensional flow in layered aquifers

    Science.gov (United States)

    Fitts, Charles R.

    1989-05-01

    Analytic functions are presented for modeling three-dimensional steady groundwater flow in stratified aquifers. The functions create discontinuity in the potential across an infinite plane while maintaining continuity of the potential gradient across the plane. These functions may be superimposed with other analytic functions to model three-dimensional flow in stratified aquifers under a variety of boundary conditions. An interface between two layers of different hydraulic conductivity, an impermeable boundary, or a thin leaky layer may be modeled using such functions. These functions are simple compared to functions for doublet distributions over finite plane panels and are suitable for efficient modeling.

  6. Analytical Modeling for the Bending Resonant Frequency of Multilayered Microresonators with Variable Cross-Section

    Directory of Open Access Journals (Sweden)

    Jian Lu

    2011-08-01

    Full Text Available Multilayered microresonators commonly use sensitive coating or piezoelectric layers for detection of mass and gas. Most of these microresonators have a variable cross-section that complicates the prediction of their fundamental resonant frequency (generally of the bending mode through conventional analytical models. In this paper, we present an analytical model to estimate the first resonant frequency and deflection curve of single-clamped multilayered microresonators with variable cross-section. The analytical model is obtained using the Rayleigh and Macaulay methods, as well as the Euler-Bernoulli beam theory. Our model is applied to two multilayered microresonators with piezoelectric excitation reported in the literature. Both microresonators are composed by layers of seven different materials. The results of our analytical model agree very well with those obtained from finite element models (FEMs and experimental data. Our analytical model can be used to determine the suitable dimensions of the microresonator’s layers in order to obtain a microresonator that operates at a resonant frequency necessary for a particular application.

  7. Analytic validity of genetic tests to identify factor V Leiden and prothrombin G20210A.

    Science.gov (United States)

    Emadi, Ashkan; Crim, Matthew T; Brotman, Daniel J; Necochea, Alejandro J; Samal, Lipika; Wilson, Lisa M; Bass, Eric B; Segal, Jodi B

    2010-04-01

    The objective of this study is to systematically review methods for detecting Factor V Leiden or prothrombin G20210A. English-language literature from MEDLINE, EMBASE, The Cochrane Library, the Cumulative Index to Nursing and Allied Health Literature, PsycInfo(c), 2000-December 2008. Studies assessed methods for detection of these mutations in at least 10 human blood samples and reported concordance, discordance, or reproducibility. Two investigators abstracted data on the sample selection criteria, test operators, DNA extraction, experimental test, reference standard, commercial instruments, concordance rates, explanation of any discordance, and whether discordance resolved after repetition. We assessed strength of the evidence using the GRADE criteria. We reviewed 7,777 titles and included 66 articles. The majority of the reviewed studies used PCR-RFLP or AS-PCR as the reference standard. The studies demonstrated that commercially available and precommercial tests have high analytic validity with all having greater than 99% concordance with the reference standard. With a few exceptions, discordance resolved with repetition of the test, suggesting operator or administrative errors were responsible for the discordant results. In the quality assurance studies, greater than 98% of laboratories demonstrated high, even perfect, accuracy when asked to diagnose a sample with a known mutation. The majority of errors came from a limited number of laboratories. Although not all methods may be accurate, there is high-grade evidence that genetic tests for the detection of FVL and prothrombin G20210A have excellent analytic validity. There is high-grade evidence that most, but not all, clinical laboratories test for FVL and prothrombin G20210A accurately.

  8. SIRS Dynamics on Random Networks: Simulations and Analytical Models

    Science.gov (United States)

    Rozhnova, Ganna; Nunes, Ana

    The standard pair approximation equations (PA) for the Susceptible-Infective-Recovered-Susceptible (SIRS) model of infection spread on a network of homogeneous degree k predict a thin phase of sustained oscillations for parameter values that correspond to diseases that confer long lasting immunity. Here we present a study of the dependence of this oscillatory phase on the parameter k and of its relevance to understand the behaviour of simulations on networks. For k = 4, we compare the phase diagram of the PA model with the results of simulations on regular random graphs (RRG) of the same degree. We show that for parameter values in the oscillatory phase, and even for large system sizes, the simulations either die out or exhibit damped oscillations, depending on the initial conditions. This failure of the standard PA model to capture the qualitative behaviour of the simulations on large RRGs is currently being investigated.

  9. Analytical and numerical models to predict the behavior of unbonded flexible risers under torsion

    Science.gov (United States)

    Ren, Shao-fei; Xue, Hong-xiang; Tang, Wen-yong

    2016-04-01

    This paper presents analytical and numerical models to predict the behavior of unbonded flexible risers under torsion. The analytical model takes local bending and torsion of tensile armor wires into consideration, and equilibrium equations of forces and displacements of layers are deduced. The numerical model includes lay angle, cross-sectional profiles of carcass, pressure armor layer and contact between layers. Abaqus/Explicit quasi-static simulation and mass scaling are adopted to avoid convergence problem and excessive computation time caused by geometric and contact nonlinearities. Results show that local bending and torsion of helical strips may have great influence on torsional stiffness, but stress related to bending and torsion is negligible; the presentation of anti-friction tapes may have great influence both on torsional stiffness and stress; hysteresis of torsion-twist relationship under cyclic loading is obtained by numerical model, which cannot be predicted by analytical model because of the ignorance of friction between layers.

  10. Analytical models for well-mixed populations of cooperators and defectors under limiting resources

    CERN Document Server

    Requejo, Rubén J; 10.1103/PhysRevE.85.066112

    2012-01-01

    In the study of the evolution of cooperation, resource limitations are usually assumed just to provide a finite population size. Recently, however, agent-based models have pointed out that resource limitation may modify the original structure of the interactions and allow for the survival of unconditional cooperators in well-mixed populations. Here, we present analytical simplified versions of two types of agent-based models recently published: one in which the limiting resource constrains the ability of reproduction of individuals but not their survival, and a second one where the limiting resource is necessary for both reproduction and survival. One finds that the analytical models display, with a few differences, the same qualitative behavior of the more complex agent-based models. In addition, the analytical models allow us to expand the study and identify the dimensionless parameters governing the final fate of the system, such as coexistence of cooperators and defectors, or dominance of defectors or of ...

  11. Analytical and Numerical Models to Predict the Behaviorof Unbonded Flexible Risers Under Torsion

    Institute of Scientific and Technical Information of China (English)

    任少飞; 薛鸿祥; 唐文勇

    2016-01-01

    This paper presents analytical and numerical models to predict the behavior of unbonded flexible risers under torsion. The analytical model takes local bending and torsion of tensile armor wires into consideration, and equilibrium equations of forces and displacements of layers are deduced. The numerical model includes lay angle, cross-sectional profiles of carcass, pressure armor layer and contact between layers. Abaqus/Explicit quasi-static simulation and mass scaling are adopted to avoid convergence problem and excessive computation time caused by geometric and contact nonlinearities. Results show that local bending and torsion of helical strips may have great influence on torsional stiffness, but stress related to bending and torsion is negligible; the presentation of anti-friction tapes may have great influence both on torsional stiffness and stress; hysteresis of torsion-twist relationship under cyclic loading is obtained by numerical model, which cannot be predicted by analytical model because of the ignorance of friction between layers.

  12. Analytical and Numerical Modelling of FRP Debonding from Concrete Substrate under Pure Shearing

    Institute of Scientific and Technical Information of China (English)

    PAN Jinlong; XU Zhun; C K Y Leung; LI Zongjin

    2012-01-01

    External bonding of fiber reinforced polymer (FRP) composites on the concrete structures has been proved to be an effective and efficient way to strengthen concrete structures.For a FRP strengthened concrete beam,it is usually observed that the failure occurs in the concrete and a thin layer of concrete is attached on the surface of the debonded FRP plate.To study the debond behavior between concrete and FRP composites,an analytical model based on the three-parameter model is developed to study the debonding behavior for the FRP-to-concrete joint under pure shearing.Then,nonlinear FEM analysis is conducted to verify the proposed analytical model.The FEM results shows good agreement with the results from the model.Finally,with the analytical model,sensitivity analyses are performed to study the effect of the interfacial parameters or the geometric parameters on the debonding behavior.

  13. Analytical model of massive Pulsar J0348+0432

    Science.gov (United States)

    Kayum Jafry, M. Abdul; Molla, Sajahan; Islam, Rabiul; Kalam, Mehedi

    2017-10-01

    In this article we propose a model for the Pulsar J0348+0432 (Antoniadis et al. in Science 340:1233232, 2013) in a compact relativistic binary. Here we investigate the physical properties of the Pulsar J0348+0432 by using the Finch and Skea (Class. Quantum Gravity 4:467, 1989) metric. Using our model, we evaluate central density (ρ0), surface density (ρb), central pressure (p 0), surface redshift (Z s) and probable radius of the above mentioned compact object, which is very much consistent with reported data. We also obtain a possible equation of state (EoS) of the pulsar which is physically acceptable.

  14. a new analytical modeling method for photovoltaic solar cells based ...

    African Journals Online (AJOL)

    Zieba Falama R, Dadjé A, Djongyang N and Doka S.Y

    2016-05-01

    May 1, 2016 ... The first approach requires taking some measurements once the PV generator is installed. .... At the open circuit voltage, I=0, V=Voc and Iph=Isc: ..... Muzathik3 ” New Approach on Mathematical Modeling of Photovoltaic Solar ...

  15. Analytical models integrated with satellite images for optimized pest management

    Science.gov (United States)

    The global field protection (GFP) was developed to protect and optimize pest management resources integrating satellite images for precise field demarcation with physical models of controlled release devices of pesticides to protect large fields. The GFP was implemented using a graphical user interf...

  16. A Meta-Analytic Review of Behavior Modeling Training

    Science.gov (United States)

    Taylor, Paul J.; Russ-Eft, Darlene F.; Chan, Daniel W. L.

    2005-01-01

    A meta-analysis of 117 studies evaluated the effects of behavior modeling training (BMT) on 6 training outcomes, across characteristics of training design. BMT effects were largest for learning outcomes, smaller for job behavior, and smaller still for results outcomes. Although BMT effects on declarative knowledge decayed over time, training…

  17. SEMI-ANALYTICAL FINITE ELEMENT METHOD FOR FICTITIOUS CRACK MODEL IN FRACTURE MECHANICS OF CONCRETE

    Institute of Scientific and Technical Information of China (English)

    王承强; 郑长良

    2004-01-01

    Based on the Hamiltonian governing equations of plane elasticity for sectorial domain, the variable separation and eigenfunction expansion techniques were employed to develop a novel analytical finite element for the fictitious crack model in fracture mechanics of concrete. The new analytical element can be implemented into FEM program systems to solve fictitious crack propagation problems for concrete cracked plates with arbitrary shapes and loads. Numerical results indicate that the method is more efficient and accurate than ordinary finite element method.

  18. Reduction of analytical thermal models and their development in the form of networks

    Science.gov (United States)

    Trigeol, J.-F.; Soulier, F.; Lagonotte, P.

    2002-11-01

    The aim of model reduction is to obtain the simplest model while reflecting as far as possible the dynamic behaviour of a system. First, we present the reduction method based on a complex admittance matrix [Y(s)] of the whole initial model. From which we obtain by two inversions, the matrix [Y_red(s)], which can be interpreted as a reduced network. We give an example of application of the numeric reduction method. The same method is applied with success to analytical expression of impedances kept from the quadrupole representation of heat conduction. In order to simulate easily the transient responses of analytical models, we present the development of analytical impedance in the form of an equivalent network, which is proved to be very efficient during simulations. The first application is done with a heterogeneous system made of two bars of different materials, one is made of copper and the other is made of steel. The second application is done with a more complex thermal system constituting a cooler with 7 branches. This cooler is reduced to 1, 2 and 3 nodes to obtain the simplest model while reflecting as far as possible the dynamic behaviour. This document presents a generalisation of the method of network reduction in the case where the models' impedances have analytical expressions. In this case, we show that contrary to the numerical reduction, which approximates admittances to the first order, we are free to choose the model order, whatever the kept nodes, in such a manner that the model's bandwidth is considered as sufficient. The resulting equivalent networks allow easy simulations of the transient responses thanks to standard electric network softwares. Beyond the dealt examples of analytical reduction, for industrial systems non analytically calculable but governed by an equation of heat diffusion, the structures (topologies) of the reduced models would be the same. That opens prospects to obtain thermal reduced models from an automated networking

  19. Replica Analysis for Portfolio Optimization with Single-Factor Model

    Science.gov (United States)

    Shinzato, Takashi

    2017-06-01

    In this paper, we use replica analysis to investigate the influence of correlation among the return rates of assets on the solution of the portfolio optimization problem. We consider the behavior of an optimal solution for the case where the return rate is described with a single-factor model and compare the findings obtained from our proposed methods with correlated return rates with those obtained with independent return rates. We then analytically assess the increase in the investment risk when correlation is included. Furthermore, we also compare our approach with analytical procedures for minimizing the investment risk from operations research.

  20. Analytical modeling of squeeze air film damping of biomimetic MEMS directional microphone

    Science.gov (United States)

    Ishfaque, Asif; Kim, Byungki

    2016-08-01

    Squeeze air film damping is introduced in microelectromechanical systems due to the motion of the fluid between two closely spaced oscillating micro-structures. The literature is abundant with different analytical models to address the squeeze air film damping effects, however, there is a lack of work in modeling the practical sensors like directional microphones. Here, we derive an analytical model of squeeze air film damping of first two fundamental vibration modes, namely, rocking and bending modes, of a directional microphone inspired from the fly Ormia ochracea's ear anatomy. A modified Reynolds equation that includes compressibility and rarefaction effects is used in the analysis. Pressure distribution under the vibrating diaphragm is derived by using Green's function. From mathematical modeling of the fly's inspired mechanical model, we infer that bringing the damping ratios of both modes in the critical damping range enhance the directional sensitivity cues. The microphone parameters are varied in derived damping formulas to bring the damping ratios in the vicinity of critical damping, and to show the usefulness of the analytical model in tuning the damping ratios of both modes. The accuracy of analytical damping results are also verified by finite element method (FEM) using ANSYS. The FEM results are in full compliance with the analytical results.

  1. Numerical and analytical modelling of battery thermal management using passive cooling systems

    OpenAIRE

    Greco, Angelo

    2016-01-01

    This thesis presents the battery thermal management systems (BTMS) modelling of Li-ions batteries and investigates the design and modelling of different passive cooling management solutions from single battery to module level. A simplified one-dimensional transient computational model of a prismatic lithium-ion battery cell is developed using thermal circuit approach in conjunction with the thermal model of the heat pipe. The proposed model is compared to an analytical solution based on varia...

  2. Analytical model for real time, noninvasive estimation of blood glucose level.

    Science.gov (United States)

    Adhyapak, Anoop; Sidley, Matthew; Venkataraman, Jayanti

    2014-01-01

    The paper presents an analytical model to estimate blood glucose level from measurements made non-invasively and in real time by an antenna strapped to a patient's wrist. Some promising success has been shown by the RIT ETA Lab research group that an antenna's resonant frequency can track, in real time, changes in glucose concentration. Based on an in-vitro study of blood samples of diabetic patients, the paper presents a modified Cole-Cole model that incorporates a factor to represent the change in glucose level. A calibration technique using the input impedance technique is discussed and the results show a good estimation as compared to the glucose meter readings. An alternate calibration methodology has been developed that is based on the shift in the antenna resonant frequency using an equivalent circuit model containing a shunt capacitor to represent the shift in resonant frequency with changing glucose levels. Work under progress is the optimization of the technique with a larger sample of patients.

  3. An Analytic Model Of Thermal Drift In Piezoresistive Microcantilever Sensors

    Energy Technology Data Exchange (ETDEWEB)

    Loui, A; Elhadj, S; Sirbuly, D J; McCall, S K; Hart, B R; Ratto, T V

    2009-08-26

    A closed form semi-empirical model has been developed to understand the physical origins of thermal drift in piezoresistive microcantilever sensors. The two-component model describes both the effects of temperature-related bending and heat dissipation on the piezoresistance. The temperature-related bending component is based on the Euler-Bernoulli theory of elastic deformation applied to a multilayer cantilever. The heat dissipation component is based on energy conservation per unit time for a piezoresistive cantilever in a Wheatstone bridge circuit, representing a balance between electrical power input and heat dissipation into the environment. Conduction and convection are found to be the primary mechanisms of heat transfer, and the dependence of these effects on the thermal conductivity, temperature, and flow rate of the gaseous environment is described. The thermal boundary layer value which defines the length scale of the heat dissipation phenomenon is treated as an empirical fitting parameter. Using the model, it is found that the cantilever heat dissipation is unaffected by the presence of a thin polymer coating, therefore the residual thermal drift in the differential response of a coated and uncoated cantilever is the result of non-identical temperature-related bending. Differential response data shows that residual drift is eliminated under isothermal laboratory conditions but not the unregulated and variable conditions that exist in the outdoor environment (i.e., the field). The two-component model is then validated by simulating the thermal drifts of an uncoated and a coated piezoresistive cantilever under field conditions over a 24 hour period using only meteorological data as input.

  4. An Analytic Model for DoD Divestments

    Science.gov (United States)

    2015-04-30

    persistent management techniques can be found in Enterprise Risk Management guides. A recent book includes case studies : Fraser, Simkins, and...Narvaez’s (2015) Implementing Enterprise Risk Management: Case Studies and Best Practices. See Chapter 32 for the lessons learned in the financial crisis of...double counting, especially if more than one or a complex intervention is being assessed. Based on models of social investment, social entrepreneurship

  5. Impact of social factors on health practices of the elderly: an analytical study in rural Surendranagar

    Directory of Open Access Journals (Sweden)

    Shashwat Nagar

    2013-04-01

    Full Text Available Introduction: Increased attention to health promotion and disease prevention are important for the appropriate care of the elderly. With the increasing life expectancy, a focus on preventive measures to decrease morbidity and improve quality of life in old age has also developed. To that end, health behavior and lifestyle have become important areas of concern over the last 20 years. Social factors lay a significant impact on the health practices. This study was therefore taken up to study the above factor and draw conclusions. Aims and objectives: 1. To study the various health practices of the elderly. 2. To find out association between the socio demographic features and the prevailing health practices. Methods: A Cross sectional analytical study was carried out. All the subjects were interviewed personally to know the details and were treated with due respect after a consent. Out of all the talukas in rural Surendranagar, Sayla was selected randomly after which Sayla village was selected in a similar manner from all the villages in the talukas. Results: The mean age of the subjects was 68±7.5. Majority of the subjects were unemployed and illiterate (58%. Social factors like Social class, staying with children and staying in joint family were significantly associated with good health practices. Conclusions: The Health practices of the elderly can be improved upon by large scale health education programmes which can be targeted on the age group. Patient compliance improvement can be achieved by explaining them about the disease and treatment protocol in detail at the time of their health visit. [Int J Res Med Sci 2013; 1(2.000: 116-122

  6. Confirmatory Factor Analytical Study of the Revised Developmental Work Personality Scale

    Science.gov (United States)

    Wong, Alex W. K.; O'Sullivan, Deirdre; Strauser, David R.

    2012-01-01

    This study investigated psychometric properties of the Revised Developmental Work Personality Scale (RDWPS). Results yielded a 14-item three-factor model that aligns with the original DWPS and fits the data very well. RDWPS scores were useful in predicting the resolution of Erikson's fourth stage of development, indicating construct validity.…

  7. Evaluation and purchase of an analytical flow cytometer: some of the numerous factors to consider.

    Science.gov (United States)

    Zucker, Robert M; Fisher, Nancy C

    2013-01-01

    When purchasing a flow cytometer, the decision of which brand, model, specifications, and accessories may be challenging. The decisions should initially be guided by the specific applications intended for the instrument. However, many other factors need to be considered, which include hardware, software, quality assurance, support, service, and price and recommendations from colleagues. These issues are discussed to help guide the purchasing process.

  8. An Analytic Linear Accelerator Source Model for Monte Carlo Dose Calculations. I. Model Representation and Construction

    CERN Document Server

    Tian, Zhen; Folkerts, Michael; Shi, Feng; Jiang, Steve B; Jia, Xun

    2015-01-01

    Monte Carlo (MC) simulation is considered as the most accurate method for radiation dose calculations. Accuracy of a source model for a linear accelerator is critical for the overall dose calculation accuracy. In this paper, we presented an analytical source model that we recently developed for GPU-based MC dose calculations. A key concept called phase-space-ring (PSR) was proposed. It contained a group of particles that are of the same type and close in energy and radial distance to the center of the phase-space plane. The model parameterized probability densities of particle location, direction and energy for each primary photon PSR, scattered photon PSR and electron PSR. For a primary photon PSRs, the particle direction is assumed to be from the beam spot. A finite spot size is modeled with a 2D Gaussian distribution. For a scattered photon PSR, multiple Gaussian components were used to model the particle direction. The direction distribution of an electron PSRs was also modeled as a 2D Gaussian distributi...

  9. Factor Structure of Scores from the Maslach Burnout Inventory: A Review and Meta-Analysis of 45 Exploratory and Confirmatory Factor-Analytic Studies

    Science.gov (United States)

    Worley, Jody A.; Vassar, Matt; Wheeler, Denna L.; Barnes, Laura L. B.

    2008-01-01

    This study provides a summary of 45 exploratory and confirmatory factor-analytic studies that examined the internal structure of scores obtained from the Maslach Burnout Inventory (MBI). It highlights characteristics of the studies that account for differences in reporting of the MBI factor structure. This approach includes an examination of the…

  10. Analytical modeling and experimental validation of a V-shape piezoelectric ultrasonic transducer

    Science.gov (United States)

    Li, Xiaoniu; Yao, Zhiyuan

    2016-07-01

    In this paper, an analytical model of a V-shape piezoelectric ultrasonic transducer is presented. The V-shape piezoelectric ultrasonic transducer has been widely applied to the piezoelectric actuator (ultrasonic motor), ultrasonic aided fabrication, sensor, and energy harvesting device. The V-shape piezoelectric ultrasonic transducer consists of two Langevin-type transducers connected together through a coupling point with a certain coupling angle. Considering the longitudinal and lateral movements of a single beam, the symmetrical and asymmetrical modals of the V-shape piezoelectric ultrasonic transducer are calculated. By using Hamilton-Lagrange equations, the electromechanical coupling model of the V-shape piezoelectric ultrasonic transducer is proposed. The influence of the coupling angle and cross-section on modal characteristics and electromechanical coupling coefficient are analyzed by the analytical model. A prototype of the V-shape piezoelectric ultrasonic transducer is fabricated, and the results of the experiments are in good agreement with the analytical model.

  11. Analytical models of calcium binding in a calcium channel

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Jinn-Liang [Department of Applied Mathematics, National Hsinchu University of Education, Hsinchu 300, Taiwan (China); Eisenberg, Bob [Department of Molecular Biophysics and Physiology, Rush University, Chicago, Illinois 60612 (United States)

    2014-08-21

    The anomalous mole fraction effect of L-type calcium channels is analyzed using a Fermi like distribution with the experimental data of Almers and McCleskey [J. Physiol. 353, 585 (1984)] and the atomic resolution model of Lipkind and Fozzard [Biochemistry 40, 6786 (2001)] of the selectivity filter of the channel. Much of the analysis is algebraic, independent of differential equations. The Fermi distribution is derived from the configuration entropy of ions and water molecules with different sizes, different valences, and interstitial voids between particles. It allows us to calculate potentials and distances (between the binding ion and the oxygen ions of the glutamate side chains) directly from the experimental data using algebraic formulas. The spatial resolution of these results is comparable with those of molecular models, but of course the accuracy is no better than that implied by the experimental data. The glutamate side chains in our model are flexible enough to accommodate different types of binding ions in different bath conditions. The binding curves of Na{sup +} and Ca{sup 2+} for [CaCl{sub 2}] ranging from 10{sup −8} to 10{sup −2} M with a fixed 32 mM background [NaCl] are shown to agree with published Monte Carlo simulations. The Poisson-Fermi differential equation—that includes both steric and correlation effects—is then used to obtain the spatial profiles of energy, concentration, and dielectric coefficient from the solvent region to the filter. The energy profiles of ions are shown to depend sensitively on the steric energy that is not taken into account in the classical rate theory. We improve the rate theory by introducing a steric energy that lumps the effects of excluded volumes of all ions and water molecules and empty spaces between particles created by Lennard-Jones type and electrostatic forces. We show that the energy landscape varies significantly with bath concentrations. The energy landscape is not constant.

  12. Leasing vs. owning a medical office: an analytical model.

    Science.gov (United States)

    Tolbert, Samuel H; Wood, Carol P

    2007-01-01

    Physicians often face a major financial dilemma: To lease or own their medical office. This article takes a set of typical assumptions for a real estate market and analyzes the capital costs, cash flow, and investment implications of the option of leasing a medical office versus owning a similar property. The paper analyzes the financial aspects of each option and the impact on net physician income and potential return-on-investment. A model for analysis is presented that can be used by practitioners who advise physicians in such decision-making.

  13. A New Analytical Model for TCP Reno with Bursts Error Considered

    Institute of Scientific and Technical Information of China (English)

    DENG Jian-min; JI Hong; YUE Guang-xin; YIN Chang-chuan

    2003-01-01

    In this paper, we present a new analytical model for TCP Reno, and this method can also be used in other versions of TCP. The first order two-state Markovian model is used to describe the wireless link, so as to deal with the burst error in wireless links very well. The tineout mechanism of TCP is also considered and a geometric method describes the erponential growth of TCP timeout . Also this method is effective for the study of the growth of TCP transmission window. Analytical results indicate that this model is effective.

  14. Improvements on Analytical Models for IEEE 802. 11e EDCF Differential Services

    Institute of Scientific and Technical Information of China (English)

    Zhang Lianbo; Fang Xuming; Shan Ying

    2006-01-01

    Zhu introduced typical analytical models to simulate the 802. 11e EDCF channel access protocol. But our analysis indicates that there are some inaccurate derivations in his presentation. This paper intends to improve analytical model with some corrections.Furthermore, for the probability of the channel being busy Pb in Zhu's model, different points and analysis method are proposed.When the network is under saturation condition, the new results about the probabilities of collision and channel busy, transmission probabilities, successful transmission probabilities, throughput and MAC layer latency are presented.

  15. Performance evaluation of four directional emissivity analytical models with thermal SAIL model and airborne images.

    Science.gov (United States)

    Ren, Huazhong; Liu, Rongyuan; Yan, Guangjian; Li, Zhao-Liang; Qin, Qiming; Liu, Qiang; Nerry, Françoise

    2015-04-01

    Land surface emissivity is a crucial parameter in the surface status monitoring. This study aims at the evaluation of four directional emissivity models, including two bi-directional reflectance distribution function (BRDF) models and two gap-frequency-based models. Results showed that the kernel-driven BRDF model could well represent directional emissivity with an error less than 0.002, and was consequently used to retrieve emissivity with an accuracy of about 0.012 from an airborne multi-angular thermal infrared data set. Furthermore, we updated the cavity effect factor relating to multiple scattering inside canopy, which improved the performance of the gap-frequency-based models.

  16. Comprehensive and Macrospin-Based Magnetic Tunnel Junction Spin Torque Oscillator Model - Part I: Analytical Model of the MTJ STO

    OpenAIRE

    Chen, Tingsu; Eklund, Anders; Iacocca, Ezio; Rodriguez, Saul; Malm, Gunnar; Åkerman, Johan; Rusu, Ana

    2014-01-01

    Magnetic tunnel junction (MTJ) spin torque oscillators (STO) have shown the potential to be used in a wide range of microwave and sensing applications. To evaluate potential uses of MTJ STO technology in various applications, an analytical model that can capture MTJ STO's characteristics, while enabling system- and circuit-level designs, is of great importance. An analytical model based on macrospin approximation is necessary for these designs since it allows implementation in hardware descri...

  17. Semi-analytical modelling of positive corona discharge in air

    Science.gov (United States)

    Pontiga, Francisco; Yanallah, Khelifa; Chen, Junhong

    2013-09-01

    Semianalytical approximate solutions of the spatial distribution of electric field and electron and ion densities have been obtained by solving Poisson's equations and the continuity equations for the charged species along the Laplacian field lines. The need to iterate for the correct value of space charge on the corona electrode has been eliminated by using the corona current distribution over the grounded plane derived by Deutsch, which predicts a cos m θ law similar to Warburg's law. Based on the results of the approximated model, a parametric study of the influence of gas pressure, the corona wire radius, and the inter-electrode wire-plate separation has been carried out. Also, the approximate solutions of the electron number density has been combined with a simplified plasma chemistry model in order to compute the ozone density generated by the corona discharge in the presence of a gas flow. This work was supported by the Consejeria de Innovacion, Ciencia y Empresa (Junta de Andalucia) and by the Ministerio de Ciencia e Innovacion, Spain, within the European Regional Development Fund contracts FQM-4983 and FIS2011-25161.

  18. Development of an analytical model for organic-fluid fouling

    Energy Technology Data Exchange (ETDEWEB)

    Panchal, C.B.; Watkinson, A.P.

    1994-10-01

    The research goal of this project is to determine ways to effectively mitigate fouling in organic fluids: hydrocarbons and derived fluids. The fouling research focuses on the development of methodology for determining threshold conditions for fouling. Initially, fluid containing chemicals known to produce foulant is analyzed; subsequently, fouling of industrial fluids is investigated. The fouling model developed for determining the effects of physical parameters is the subject of this report. The fouling model is developed on the premise that the chemical reaction for generation of precursor can take place in the bulk fluid, in the thermal-boundary layer, or at the fluid/wall interface, depending upon the interactive effects of fluid dynamics, heat and mass transfer, and the controlling chemical reaction. In the analysis, the experimental data are examined for fouling deposition of polyperoxide produced by autoxidation of indene in kerosene. The effects of fluid and wall temperatures for two flow geometries are analyzed. The results show that the relative effects of physical parameters on the fouling rate differ for the three fouling mechanisms. Therefore, to apply the closed-flow-loop data to industrial conditions, the controlling mechanism must be identified.

  19. Analytical modeling of structure-soil systems for lunar bases

    Science.gov (United States)

    Macari-Pasqualino, Jose Emir

    1989-01-01

    The study of the behavior of granular materials in a reduced gravity environment and under low effective stresses became a subject of great interest in the mid 1960's when NASA's Surveyor missions to the Moon began the first extraterrestrial investigation and it was found that Lunar soils exhibited properties quite unlike those on Earth. This subject gained interest during the years of the Apollo missions and more recently due to NASA's plans for future exploration and colonization of Moon and Mars. It has since been clear that a good understanding of the mechanical properties of granular materials under reduced gravity and at low effective stress levels is of paramount importance for the design and construction of surface and buried structures on these bodies. In order to achieve such an understanding it is desirable to develop a set of constitutive equations that describes the response of such materials as they are subjected to tractions and displacements. This presentation examines issues associated with conducting experiments on highly nonlinear granular materials under high and low effective stresses. The friction and dilatancy properties which affect the behavior of granular soils with low cohesion values are assessed. In order to simulate the highly nonlinear strength and stress-strain behavior of soils at low as well as high effective stresses, a versatile isotropic, pressure sensitive, third stress invariant dependent, cone-cap elasto-plastic constitutive model was proposed. The integration of the constitutive relations is performed via a fully implicit Backward Euler technique known as the Closest Point Projection Method. The model was implemented into a finite element code in order to study nonlinear boundary value problems associated with homogeneous as well as nonhomogeneous deformations at low as well as high effective stresses. The effect of gravity (self-weight) on the stress-strain-strength response of these materials is evaluated. The calibration

  20. Improved Analytical Model of a Permanent-Magnet Brushless DC Motor

    NARCIS (Netherlands)

    Kumar, P.; Bauer, P.

    2008-01-01

    In this paper, we develop a comprehensive model of a permanent-magnet brushless DC (BLDC) motor. An analytical model for determining instantaneous air-gap field density is developed. This instantaneous field distribution can be further used to determine the cogging torque, induced back electromotive

  1. An analytical model for the performance of geographical multi-hop broadcast

    NARCIS (Netherlands)

    Klein Wolterink, W.; Heijenk, G.J.; Berg, van den J.L.

    2012-01-01

    In this paper we present an analytical model accurately describing the behaviour of a multi-hop broadcast protocol. Our model covers the scenario in which a message is forwarded over a straight road and inter-node distances are distributed exponentially. Intermediate forwarders draw a small random d

  2. Analytical models and system topologies for remote multispectral data acquisition and classification

    Science.gov (United States)

    Huck, F. O.; Park, S. K.; Burcher, E. E.; Kelly, W. L., IV

    1978-01-01

    Simple analytical models are presented of the radiometric and statistical processes that are involved in multispectral data acquisition and classification. Also presented are basic system topologies which combine remote sensing with data classification. These models and topologies offer a preliminary but systematic step towards the use of computer simulations to analyze remote multispectral data acquisition and classification systems.

  3. A Two-Stage Approach to Synthesizing Covariance Matrices in Meta-Analytic Structural Equation Modeling

    Science.gov (United States)

    Cheung, Mike W. L.; Chan, Wai

    2009-01-01

    Structural equation modeling (SEM) is widely used as a statistical framework to test complex models in behavioral and social sciences. When the number of publications increases, there is a need to systematically synthesize them. Methodology of synthesizing findings in the context of SEM is known as meta-analytic SEM (MASEM). Although correlation…

  4. Design of homogeneous trench-assisted multi-core fibers based on analytical model

    DEFF Research Database (Denmark)

    Ye, Feihong; Tu, Jiajing; Saitoh, Kunimasa

    2016-01-01

    is the quasi-optimum core layout starting from an one-ring structured 12-core fiber. Based on the analytical model, a square-lattice structured 24-core fiber and a 32-core fiber are designed both for propagation-direction interleaving (PDI) and non-PDI transmission schemes. The proposed model provides...

  5. An Analytical Model for Spectral Peak Frequency Prediction of Substrate Noise in CMOS Substrates

    DEFF Research Database (Denmark)

    Shen, Ming; Mikkelsen, Jan H.

    2013-01-01

    This paper proposes an analytical model describing the generation of switching current noise in CMOS substrates. The model eliminates the need for SPICE simulations in existing methods by conducting a transient analysis on a generic CMOS inverter and approximating the switching current waveform us...

  6. A steady-state analytical slope stability model for complex hillslopes

    NARCIS (Netherlands)

    Talebi, A.; Troch, P.A.; Uijlenhoet, R.

    2008-01-01

    This paper presents a steady-state analytical hillslope stability model to study the role of topography on rain-induced shallow landslides. We combine a bivariate continuous function of the topographic surface, a steady-state hydrological model of hillslope saturated storage, and the infinite slope

  7. Meta-Analytic Structural Equation Modeling (MASEM): Comparison of the Multivariate Methods

    Science.gov (United States)

    Zhang, Ying

    2011-01-01

    Meta-analytic Structural Equation Modeling (MASEM) has drawn interest from many researchers recently. In doing MASEM, researchers usually first synthesize correlation matrices across studies using meta-analysis techniques and then analyze the pooled correlation matrix using structural equation modeling techniques. Several multivariate methods of…

  8. Analytical model for double split ring resonators with arbitrary ring width

    DEFF Research Database (Denmark)

    Zhurbenko, Vitaliy; Jensen, Thomas; Krozer, Viktor

    2008-01-01

    For the first time, the analytical model for a double split ring resonator with unequal width rings is developed. The proposed models for the resonators with equal and unequal widths are based on an impedance matrix representation and provide the prediction of performance in a wide frequency rang...

  9. A steady-state analytical slope stability model for complex hillslopes

    NARCIS (Netherlands)

    Talebi, A.; Troch, P.A.; Uijlenhoet, R.

    2008-01-01

    This paper presents a steady-state analytical hillslope stability model to study the role of topography on rain-induced shallow landslides. We combine a bivariate continuous function of the topographic surface, a steady-state hydrological model of hillslope saturated storage, and the infinite slope

  10. A Two-Stage Approach to Synthesizing Covariance Matrices in Meta-Analytic Structural Equation Modeling

    Science.gov (United States)

    Cheung, Mike W. L.; Chan, Wai

    2009-01-01

    Structural equation modeling (SEM) is widely used as a statistical framework to test complex models in behavioral and social sciences. When the number of publications increases, there is a need to systematically synthesize them. Methodology of synthesizing findings in the context of SEM is known as meta-analytic SEM (MASEM). Although correlation…

  11. Goals and Characteristics of Long-Term Care Programs: An Analytic Model.

    Science.gov (United States)

    Braun, Kathryn L.; Rose, Charles L.

    1989-01-01

    Used medico-social analytic model to compare five long-term care programs: Skilled Nursing Facility-Intermediate Care Facility (SNF-ICF) homes, ICF homes, foster homes, day hospitals, and home care. Identified similarities and differences among programs. Preliminary findings suggest that model is useful in the evaluation and design of long-term…

  12. Validation of analytical models for the design of basal reinforced piled embankments

    NARCIS (Netherlands)

    Van Eekelen, S.J.M.; Bezuijen, A.; Van Tol, A.F.

    2014-01-01

    Van Eekelen et al., 2012a, Van Eekelen et al., 2012b and Van Eekelen et al., 2013) have introduced an analytical model for the design of the geosynthetic reinforcement (GR) in a piled embankment. This paper further validates this model with measurements from seven full-scale tests and four series of

  13. A comparison of galaxy group luminosity functions from semi-analytic models

    NARCIS (Netherlands)

    Snaith, Owain N.; Gibson, Brad K.; Brook, Chris B.; Courty, Stéphanie; Sánchez-Blázquez, Patricia; Kawata, Daisuke; Knebe, Alexander; Sales, Laura V.

    Semi-analytic models (SAMs) are currently one of the primary tools with which we model statistically significant ensembles of galaxies. The underlying physical prescriptions inherent to each SAM are, in many cases, different from one another. Several SAMs have been applied to the dark matter merger

  14. Improved Analytical Model of a Permanent-Magnet Brushless DC Motor

    NARCIS (Netherlands)

    Kumar, P.; Bauer, P.

    2008-01-01

    In this paper, we develop a comprehensive model of a permanent-magnet brushless DC (BLDC) motor. An analytical model for determining instantaneous air-gap field density is developed. This instantaneous field distribution can be further used to determine the cogging torque, induced back electromotive

  15. An Analytical Model for the Influence of Contact Resistance on Thermoelectric Efficiency

    DEFF Research Database (Denmark)

    Bjørk, Rasmus

    2016-01-01

    as to the analytical models of Ebling et al. (J Electron Mater 39:1376, 2010) and Min and Rowe (J Power Sour 38:253, 1992). The model presented here is shown to accurately calculate the efficiency for all systems and all contact resistances considered, with an average difference in efficiency between the numerical...

  16. Alternative Factor Models and Heritability of the Short Leyton Obsessional Inventory--Children's Version

    Science.gov (United States)

    Moore, Janette; Smith, Gillian W.; Shevlin, Mark; O'Neill, Francis A.

    2010-01-01

    An alternative models framework was used to test three confirmatory factor analytic models for the Short Leyton Obsessional Inventory-Children's Version (Short LOI-CV) in a general population sample of 517 young adolescent twins (11-16 years). A one-factor model as implicit in current classification systems of Obsessive-Compulsive Disorder (OCD),…

  17. Alternative Factor Models and Heritability of the Short Leyton Obsessional Inventory--Children's Version

    Science.gov (United States)

    Moore, Janette; Smith, Gillian W.; Shevlin, Mark; O'Neill, Francis A.

    2010-01-01

    An alternative models framework was used to test three confirmatory factor analytic models for the Short Leyton Obsessional Inventory-Children's Version (Short LOI-CV) in a general population sample of 517 young adolescent twins (11-16 years). A one-factor model as implicit in current classification systems of Obsessive-Compulsive Disorder (OCD),…

  18. One-compartment model with Michaelis-Menten elimination kinetics and therapeutic window: an analytical approach.

    Science.gov (United States)

    Tang, Sanyi; Xiao, Yanni

    2007-12-01

    The purpose of this article is to provide the analytical solutions of one-compartment models with Michaelis-Menten elimination kinetics for three different inputs (single intravenous dose, multiple-dose bolus injection and constant). All analytical solutions obtained in present paper can be described by the well defined Lambert W function which can be easily implemented in most mathematical softwares such as Matlab and Maple. These results will play an important role in fitting the Michaelis-Menten parameters and in designing a dosing regimen to maintain steady-state plasma concentrations. In particular, the analytical periodic solution for multi-dose inputs is also given, and we note that the maximum and minimum values of the periodic solution depends on the Michaelis-Menten parameters, dose and time interval of drug administration. In practice, it is important to maintain a concentration above the minimum therapeutic level at all times without exceeding the minimum toxic concentration. Therefore, the one-compartment model with therapeutic window is proposed, and further the existence of periodic solution, analytical expression and its period are analyzed. The analytical formula of period plays a key role in designing a dose regimen to maintain the plasma concentration within a specified range over long periods of therapy. Finally, the completely analytical solution for the constant input rate is derived and discussed which depends on the relations between constant input rate and maximum rate of change of concentration.

  19. Scenes for Social Information Processing in Adolescence: Item and factor analytic procedures for psychometric appraisal.

    Science.gov (United States)

    Vagos, Paula; Rijo, Daniel; Santos, Isabel M

    2016-04-01

    Relatively little is known about measures used to investigate the validity and applications of social information processing theory. The Scenes for Social Information Processing in Adolescence includes items built using a participatory approach to evaluate the attribution of intent, emotion intensity, response evaluation, and response decision steps of social information processing. We evaluated a sample of 802 Portuguese adolescents (61.5% female; mean age = 16.44 years old) using this instrument. Item analysis and exploratory and confirmatory factor analytic procedures were used for psychometric examination. Two measures for attribution of intent were produced, including hostile and neutral; along with 3 emotion measures, focused on negative emotional states; 8 response evaluation measures; and 4 response decision measures, including prosocial and impaired social behavior. All of these measures achieved good internal consistency values and fit indicators. Boys seemed to favor and choose overt and relational aggression behaviors more often; girls conveyed higher levels of neutral attribution, sadness, and assertiveness and passiveness. The Scenes for Social Information Processing in Adolescence achieved adequate psychometric results and seems a valuable alternative for evaluating social information processing, even if it is essential to continue investigation into its internal and external validity.

  20. Design of Analytical Model for Ultra Wideband System

    Directory of Open Access Journals (Sweden)

    Alpana P. Adsul

    2010-05-01

    Full Text Available The UWB (Ultra Wideband technology has drawn phenomenal interest in industry as well as academia.Ultra Wide Band impulse radios are microwave systems that communicate using baseband pulses of veryshort duration. UWB systems transmit information data over a wide frequency spectrum with low powerconsumption and high speed for local area wireless network applications. Unlike the traditional digitalcommunication method based on a carrier wave, UWB is pulse based. Pulse Generation, modulation, andmultiple access are time domain dependent functions. This paper presents the development of analyticalmodel for UWB system. A theoretical reference for UWB system performances is designed in non-idealchannels. In this mathematical models for biphase, pulse–position and hybrid modulation are developed.The detection rules are formulated for detecting signals in AWGN channels. The performance of UWBsystem is described with the help of BER. The BER of a UWB system depends on the modulation schemeand detection method it uses. It is observed that for optimum performance modulation parameterselection is important.

  1. Measurement strategy and analytic model to determine firing pin force

    Science.gov (United States)

    Lesenciuc, Ioan; Suciu, Cornel

    2016-12-01

    As illustrated in literature, ballistics is a branch of theoretical mechanics, which studies the construction and working principles of firearms and ammunition, their effects, as well as the motions of projectiles and bullets1. Criminalistics identification, as part of judiciary identification represents an activity aimed at finding common traits of different objects, objectives, phenomena and beings, but more importantly, traits that differentiate each of them from similar ones2-4. In judicial ballistics, in the case of rifled firearms it is relatively simple for experts to identify the used weapon from traces left on the projectile, as the rifling of the barrel leaves imprints on the bullet, which remain approximately identical even after the respective weapon is fired 100 times with the same barrel. However, in the case of smoothbore firearms, their identification becomes much more complicated. As the firing cap suffers alterations from being hit by the firing pin, determination of the force generated during impact creates the premises for determining the type of firearm used to shoot the respective cartridge. The present paper proposes a simple impact model that can be used to evaluate the force generated by the firing pin during its impact with the firing cap. The present research clearly showed that each rifle, by the combination of the three investigated parameters (impact force maximum value, its variation diagram, and impact time) leave a unique trace. Application of such a method in ballistics can create the perspectives for formulating clear conclusions that eliminate possible judicial errors in this field.

  2. Analytical modeling of demagnetizing effect in magnetoelectric ferrite/PZT/ferrite trilayers taking into account a mechanical coupling

    Science.gov (United States)

    Loyau, V.; Aubert, A.; LoBue, M.; Mazaleyrat, F.

    2017-03-01

    In this paper, we investigate the demagnetizing effect in ferrite/PZT/ferrite magnetoelectric (ME) trilayer composites consisting of commercial PZT discs bonded by epoxy layers to Ni-Co-Zn ferrite discs made by a reactive Spark Plasma Sintering (SPS) technique. ME voltage coefficients (transversal mode) were measured on ferrite/PZT/ferrite trilayer ME samples with different thicknesses or phase volume ratio in order to highlight the influence of the magnetic field penetration governed by these geometrical parameters. Experimental ME coefficients and voltages were compared to analytical calculations using a quasi-static model. Theoretical demagnetizing factors of two magnetic discs that interact together in parallel magnetic structures were derived from an analytical calculation based on a superposition method. These factors were introduced in ME voltage calculations which take account of the demagnetizing effect. To fit the experimental results, a mechanical coupling factor was also introduced in the theoretical formula. This reflects the differential strain that exists in the ferrite and PZT layers due to shear effects near the edge of the ME samples and within the bonding epoxy layers. From this study, an optimization in magnitude of the ME voltage is obtained. Lastly, an analytical calculation of demagnetizing effect was conducted for layered ME composites containing higher numbers of alternated layers (n ≥ 5). The advantage of such a structure is then discussed.

  3. An Analytical Gate-All-Around MOSFET Model for Circuit Simulation

    Directory of Open Access Journals (Sweden)

    Kuan-Chou Lin

    2015-01-01

    Full Text Available A generic charge-based compact model for undoped (lightly doped quadruple-gate (QG and cylindrical-gate MOSFETs using Verilog-A is developed. This model is based on the exact solution of Poisson’s equation with scale length. The fundamental DC and charging currents of QG MOSFETs are physically and analytically calculated. In addition, as the Verilog-A modeling is portable for different circuit simulators, the modeling scheme provides a useful tool for circuit designers.

  4. An analytical model for solute transport through a GCL-based two-layered liner considering biodegradation.

    Science.gov (United States)

    Guan, C; Xie, H J; Wang, Y Z; Chen, Y M; Jiang, Y S; Tang, X W

    2014-01-01

    An analytical model for solute advection and dispersion in a two-layered liner consisting of a geosynthetic clay liner (GCL) and a soil liner (SL) considering the effect of biodegradation was proposed. The analytical solution was derived by Laplace transformation and was validated over a range of parameters using the finite-layer method based software Pollute v7.0. Results show that if the half-life of the solute in GCL is larger than 1 year, the degradation in GCL can be neglected for solute transport in GCL/SL. When the half-life of GCL is less than 1 year, neglecting the effect of degradation in GCL on solute migration will result in a large difference of relative base concentration of GCL/SL (e.g., 32% for the case with half-life of 0.01 year). The 100-year solute base concentration can be reduced by a factor of 2.2 when the hydraulic conductivity of the SL was reduced by an order of magnitude. The 100-year base concentration was reduced by a factor of 155 when the half life of the contaminant in the SL was reduced by an order of magnitude. The effect of degradation is more important in approving the groundwater protection level than the hydraulic conductivity. The analytical solution can be used for experimental data fitting, verification of complicated numerical models and preliminary design of landfill liner systems.

  5. New analytical threshold voltage model for halo-doped cylindrical surrounding-gate MOSFETs

    Energy Technology Data Exchange (ETDEWEB)

    Li Cong; Zhuang Yiqi; Han Ru, E-mail: cong.li@mail.xidan.edu.cn [Key Laboratory for Wide Band-Gap Semiconductor Materials and Devices of Ministry of Education, School of Microelectronics, Xidian University, Xi' an 710071 (China)

    2011-07-15

    Using an exact solution of two-dimensional Poisson's equation in cylindrical coordinates, a new analytical model comprising electrostatic potential, electric field, threshold voltage and subthreshold current for halo-doped surrounding-gate MOSFETs is developed. It is found that a new analytical model exhibits higher accuracy than that based on parabolic potential approximation when the thickness of the silicon channel is much larger than that of the oxide. It is also revealed that moderate halo doping concentration, thin gate oxide thickness and small silicon channel radius are needed to improve the threshold voltage characteristics. The derived analytical model agrees well with a three-dimensional numerical device simulator ISE. (semiconductor devices)

  6. Factors Influencing Beliefs for Adoption of a Learning Analytics Tool: An Empirical Study

    Science.gov (United States)

    Ali, Liaqat; Asadi, Mohsen; Gasevic, Dragan; Jovanovic, Jelena; Hatala, Marek

    2013-01-01

    Present research and development offer various learning analytics tools providing insights into different aspects of learning processes. Adoption of a specific tool for practice is based on how its learning analytics are perceived by educators to support their pedagogical and organizational goals. In this paper, we propose and empirically validate…

  7. Mean-intercept anisotropy analysis of porous media. I. Analytic formulae for anisotropic Boolean models.

    Science.gov (United States)

    Klatt, Michael A; Schröder-Turk, Gerd E; Mecke, Klaus

    2017-07-01

    Structure-property relations, which relate the shape of the microstructure to physical properties such as transport or mechanical properties, need sensitive measures of structure. What are suitable fabric tensors that quantify the shape of anisotropic heterogeneous materials? The mean intercept length is among the most commonly used characteristics of anisotropy in porous media, for example, of trabecular bone in medical physics. We analyze the orientation-biased Boolean model, a versatile stochastic model that represents microstructures as overlapping grains with an orientation bias towards a preferred direction. This model is an extension of the isotropic Boolean model, which has been shown to truthfully reproduce multi-functional properties of isotropic porous media. We explain the close relationship between the concept of intersections with test lines to the elaborate mathematical theory of queues, and how explicit results from the latter can be directly applied to characterize microstructures. In this series of two papers, we provide analytic formulas for the anisotropic Boolean model and demonstrate often overlooked conceptual shortcomings of this approach. Queuing theory is used to derive simple and illustrative formulas for the mean intercept length. It separates into an intensity-dependent and an orientation-dependent factor. The global average of the mean intercept length can be expressed by local characteristics of a single grain alone. We thus identify which shape information about the random process the mean intercept length contains. The connection between global and local quantities helps to interpret observations and provides insights into the possibilities and limitations of the analysis. In the second paper of this series, we discuss, based on the findings in this paper, short-comings of the mean intercept analysis for (bone-)microstructure characterization. We will suggest alternative and better defined sensitive anisotropy measures from integral

  8. Computational and analytical modeling of cationic lipid-DNA complexes.

    Science.gov (United States)

    Farago, Oded; Grønbech-Jensen, Niels

    2007-05-01

    We present a theoretical study of the physical properties of cationic lipid-DNA (CL-DNA) complexes--a promising synthetically based nonviral carrier of DNA for gene therapy. The study is based on a coarse-grained molecular model, which is used in Monte Carlo simulations of mesoscopically large systems over timescales long enough to address experimental reality. In the present work, we focus on the statistical-mechanical behavior of lamellar complexes, which in Monte Carlo simulations self-assemble spontaneously from a disordered random initial state. We measure the DNA-interaxial spacing, d(DNA), and the local cationic area charge density, sigma(M), for a wide range of values of the parameter (c) representing the fraction of cationic lipids. For weakly charged complexes (low values of (c)), we find that d(DNA) has a linear dependence on (c)(-1), which is in excellent agreement with x-ray diffraction experimental data. We also observe, in qualitative agreement with previous Poisson-Boltzmann calculations of the system, large fluctuations in the local area charge density with a pronounced minimum of sigma(M) halfway between adjacent DNA molecules. For highly-charged complexes (large (c)), we find moderate charge density fluctuations and observe deviations from linear dependence of d(DNA) on (c)(-1). This last result, together with other findings such as the decrease in the effective stretching modulus of the complex and the increased rate at which pores are formed in the complex membranes, are indicative of the gradual loss of mechanical stability of the complex, which occurs when (c) becomes large. We suggest that this may be the origin of the recently observed enhanced transfection efficiency of lamellar CL-DNA complexes at high charge densities, because the completion of the transfection process requires the disassembly of the complex and the release of the DNA into the cytoplasm. Some of the structural properties of the system are also predicted by a continuum

  9. Coupled thermodynamic-dynamic semi-analytical model of Free Piston Stirling engines

    CERN Document Server

    Formosa, Fabien

    2013-01-01

    The study of free piston Stirling engine (FPSE) requires both accurate thermodynamic and dynamic modelling to predict its performances. The steady state behaviour of the engine partly relies on non linear dissipative phenomena such as pressure drop loss within heat exchangers which is dependant on the temperature within the associated components. An analytical thermodynamic model which encompasses the effectiveness and the flaws of the heat exchangers and the regenerator has been previously developed and validated. A semi-analytical dynamic model of FPSE is developed and presented in this paper. The thermodynamic model is used to define the thermal variables that are used in the dynamic model which evaluates the kinematic results. Thus, a coupled iterative strategy has been used to perform a global simulation. The global modelling approach has been validated using the experimental data available from the NASA RE-1000 Stirling engine prototype. The resulting coupled thermodynamic-dynamic model using a standard...

  10. WFR-2D: an analytical model for PWAS-generated 2D ultrasonic guided wave propagation

    Science.gov (United States)

    Shen, Yanfeng; Giurgiutiu, Victor

    2014-03-01

    This paper presents WaveFormRevealer 2-D (WFR-2D), an analytical predictive tool for the simulation of 2-D ultrasonic guided wave propagation and interaction with damage. The design of structural health monitoring (SHM) systems and self-aware smart structures requires the exploration of a wide range of parameters to achieve best detection and quantification of certain types of damage. Such need for parameter exploration on sensor dimension, location, guided wave characteristics (mode type, frequency, wavelength, etc.) can be best satisfied with analytical models which are fast and efficient. The analytical model was constructed based on the exact 2-D Lamb wave solution using Bessel and Hankel functions. Damage effects were inserted in the model by considering the damage as a secondary wave source with complex-valued directivity scattering coefficients containing both amplitude and phase information from wave-damage interaction. The analytical procedure was coded with MATLAB, and a predictive simulation tool called WaveFormRevealer 2-D was developed. The wave-damage interaction coefficients (WDICs) were extracted from harmonic analysis of local finite element model (FEM) with artificial non-reflective boundaries (NRB). The WFR-2D analytical simulation results were compared and verified with full scale multiphysics finite element models and experiments with scanning laser vibrometer. First, Lamb wave propagation in a pristine aluminum plate was simulated with WFR-2D, compared with finite element results, and verified by experiments. Then, an inhomogeneity was machined into the plate to represent damage. Analytical modeling was carried out, and verified by finite element simulation and experiments. This paper finishes with conclusions and suggestions for future work.

  11. The Infinite Hierarchical Factor Regression Model

    CERN Document Server

    Rai, Piyush

    2009-01-01

    We propose a nonparametric Bayesian factor regression model that accounts for uncertainty in the number of factors, and the relationship between factors. To accomplish this, we propose a sparse variant of the Indian Buffet Process and couple this with a hierarchical model over factors, based on Kingman's coalescent. We apply this model to two problems (factor analysis and factor regression) in gene-expression data analysis.

  12. Semi-numerical simulation of reionization with semi-analytical modeling of galaxy formation

    Institute of Scientific and Technical Information of China (English)

    Jie Zhou; Qi Guo; Gao-Chao Liu; Bin Yue; Yi-Dong Xu; Xue-Lei Chen

    2013-01-01

    In a semi-numerical model of reionization,the evolution of ionization fraction is approximately simulated by the criterion of ionizing photon to baryon ratio.We incorporate a semi-analytical model of galaxy formation based on the Millennium II N-body simulation into the semi-numerical modeling of reionization.The semianalytical model is used to predict the production of ionizing photons,then we use the semi-numerical method to model the reionization process.Such an approach allows more detailed modeling of the reionization,and also connects observations of galaxies at low and high redshifts to the reionization history.The galaxy formation model we use was designed to match the low-z observations,and it also fits the high redshift luminosity function reasonably well,but its prediction about star formation falls below the observed value,and we find that it also underpredicts the stellar ionizing photon production rate,hence the reionization cannot be completed at z ~ 6.We also consider simple modifications of the model with more top heavy initial mass functions,which can allow the reionization to occur at earlier epochs.The incorporation of the semi-analytical model may also affect the topology of the HI regions during the epoch of reionization,and the neutral regions produced by our simulations with the semi-analytical model,which appeared less poriferous than the simple halo-based models.

  13. Blended Learning Analytics Model for Evaluation (BLAME). Et case-studie af universitetsunderviseres brug af Blackboard

    DEFF Research Database (Denmark)

    Musaeus, Peter; Bennedsen, Andreas Brændstrup; Hansen, Janne Saltoft

    2015-01-01

    I denne artikel vil vi præsentere en strategi til inddragelse af læringsanalytik (learning analytics) ved evaluering af universitetsunderviseres brug af et nyt LMS på Aarhus Universitet: Blackboard. Vi diskuterer en model (BLAME: Blended Learning Analytics Model of Evaluation) for, hvordan...... kategorisering af kurser og data om læringsanalytik indsamlet på Blackboard kan integreres. Endvidere belyser vi, hvilke implikationer en sådan læringsanalytik kan have for blended learning ved at analysere to forskellige uddannelses-cases/illustrationer. Dernæst diskuterer vi pædagogisk udvikling i forbindelse...

  14. Blended Learning Analytics Model for Evaluation (BLAME). Et case-studie af universitetsunderviseres brug af Blackboard

    DEFF Research Database (Denmark)

    Musaeus, Peter; Bennedsen, Andreas Brændstrup; Hansen, Janne Saltoft

    2015-01-01

    I denne artikel vil vi præsentere en strategi til inddragelse af læringsanalytik (learning analytics) ved evaluering af universitetsunderviseres brug af et nyt LMS på Aarhus Universitet: Blackboard. Vi diskuterer en model (BLAME: Blended Learning Analytics Model of Evaluation) for, hvordan...... kategorisering af kurser og data om læringsanalytik indsamlet på Blackboard kan integreres. Endvidere belyser vi, hvilke implikationer en sådan læringsanalytik kan have for blended learning ved at analysere to forskellige uddannelses-cases/illustrationer. Dernæst diskuterer vi pædagogisk udvikling i forbindelse...

  15. Analytical model for investigation of interior noise characteristics in aircraft with multiple propellers including synchrophasing

    Science.gov (United States)

    Fuller, C. R.

    1986-01-01

    A simplified analytical model of transmission of noise into the interior of propeller-driven aircraft has been developed. The analysis includes directivity and relative phase effects of the propeller noise sources, and leads to a closed form solution for the coupled motion between the interior and exterior fields via the shell (fuselage) vibrational response. Various situations commonly encountered in considering sound transmission into aircraft fuselages are investigated analytically and the results obtained are compared to measurements in real aircraft. In general the model has proved successful in identifying basic mechanisms behind noise transmission phenomena.

  16. Explicit analytical solutions of the anisotropic Brinkman model for the natural convection in porous media

    Institute of Scientific and Technical Information of China (English)

    CAI; Ruixian(蔡睿贤); ZHANG; Na(张娜)

    2002-01-01

    Some algebraically explicit analytical solutions are derived for the anisotropic Brinkman model an improved Darcy model describing the natural convection in porous media. Besides their important theoretical meaning (for example, to analyze the non-Darcy and anisotropic effects on the convection), such analytical solutions can be the benchmark solutions to promoting the develop ment of computational heat and mass transfer. For instance, we can use them to check the accuracy,convergence and effectiveness of various numerical computational methods and to improve numerical calculation skills such as differential schemes and grid generation ways.

  17. The Structure of Negative Self-Statements in Children and Adolescents: A Confirmatory Factor-Analytic Approach

    Science.gov (United States)

    Schniering, Carolyn A.; Rapee, Ronald M.

    2004-01-01

    The aim of this study was to examine the nature and organization of a range of negative self-statements in children and adolescents, using a structural equations/confirmatory factor-analytic approach. A community sample of 978 children aged 7-16 years completed a questionnaire about the frequency with which they experienced a broad range of…

  18. On Improving Analytical Models of Cosmic Reionization for Matching Numerical Simulation

    Science.gov (United States)

    Kaurov, Alexander A.

    2016-11-01

    The methods for studying the epoch of cosmic reionization vary from full radiative transfer simulations to purely analytical models. While numerical approaches are computationally expensive and are not suitable for generating many mock catalogs, analytical methods are based on assumptions and approximations. We explore the interconnection between both methods. First, we ask how the analytical framework of excursion set formalism can be used for statistical analysis of numerical simulations and visual representation of the morphology of ionization fronts. Second, we explore the methods of training the analytical model on a given numerical simulation. We present a new code which emerged from this study. Its main application is to match the analytical model with a numerical simulation. Then, it allows one to generate mock reionization catalogs with volumes exceeding the original simulation quickly and computationally inexpensively, meanwhile reproducing large-scale statistical properties. These mock catalogs are particularly useful for cosmic microwave background polarization and 21 cm experiments, where large volumes are required to simulate the observed signal.

  19. On Improving Analytical Models of Cosmic Reionization for Matching Numerical Simulations

    Energy Technology Data Exchange (ETDEWEB)

    Kaurov, Alexander A. [Univ. of Chicago, IL (United States)

    2016-01-01

    The methods for studying the epoch of cosmic reionization vary from full radiative transfer simulations to purely analytical models. While numerical approaches are computationally expensive and are not suitable for generating many mock catalogs, analytical methods are based on assumptions and approximations. We explore the interconnection between both methods. First, we ask how the analytical framework of excursion set formalism can be used for statistical analysis of numerical simulations and visual representation of the morphology of ionization fronts. Second, we explore the methods of training the analytical model on a given numerical simulation. We present a new code which emerged from this study. Its main application is to match the analytical model with a numerical simulation. Then, it allows one to generate mock reionization catalogs with volumes exceeding the original simulation quickly and computationally inexpensively, meanwhile reproducing large scale statistical properties. These mock catalogs are particularly useful for CMB polarization and 21cm experiments, where large volumes are required to simulate the observed signal.

  20. Transient vibration analytical modeling and suppressing for vibration absorber system under impulse excitation

    Science.gov (United States)

    Wang, Xi; Yang, Bintang; Yu, Hu; Gao, Yulong

    2017-04-01

    The impulse excitation of mechanism causes transient vibration. In order to achieve adaptive transient vibration control, a method which can exactly model the response need to be proposed. This paper presents an analytical model to obtain the response of the primary system attached with dynamic vibration absorber (DVA) under impulse excitation. The impulse excitation which can be divided into single-impulse excitation and multi-impulse excitation is simplified as sinusoidal wave to establish the analytical model. To decouple the differential governing equations, a transform matrix is applied to convert the response from the physical coordinate to model coordinate. Therefore, the analytical response in the physical coordinate can be obtained by inverse transformation. The numerical Runge-Kutta method and experimental tests have demonstrated the effectiveness of the analytical model proposed. The wavelet of the response indicates that the transient vibration consists of components with multiple frequencies, and it shows that the modeling results coincide with the experiments. The optimizing simulations based on genetic algorithm and experimental tests demonstrate that the transient vibration of the primary system can be decreased by changing the stiffness of the DVA. The results presented in this paper are the foundations for us to develop the adaptive transient vibration absorber in the future.

  1. Useful measures and models for analytical quality management in medical laboratories.

    Science.gov (United States)

    Westgard, James O

    2016-02-01

    The 2014 Milan Conference "Defining analytical performance goals 15 years after the Stockholm Conference" initiated a new discussion of issues concerning goals for precision, trueness or bias, total analytical error (TAE), and measurement uncertainty (MU). Goal-setting models are critical for analytical quality management, along with error models, quality-assessment models, quality-planning models, as well as comprehensive models for quality management systems. There are also critical underlying issues, such as an emphasis on MU to the possible exclusion of TAE and a corresponding preference for separate precision and bias goals instead of a combined total error goal. This opinion recommends careful consideration of the differences in the concepts of accuracy and traceability and the appropriateness of different measures, particularly TAE as a measure of accuracy and MU as a measure of traceability. TAE is essential to manage quality within a medical laboratory and MU and trueness are essential to achieve comparability of results across laboratories. With this perspective, laboratory scientists can better understand the many measures and models needed for analytical quality management and assess their usefulness for practical applications in medical laboratories.

  2. DETERMINATION OF ELECTRODEPOSITION HARDNESS BY ANALYTICAL MODELING PART I - Ni-P COATINGS OBTAINED BY VARYING THE ELABORATION TIME -

    Directory of Open Access Journals (Sweden)

    PASĂRE Minodora Maria

    2012-05-01

    Full Text Available Results obtained from Vickers hardness tests were used for analytical modeling models Buckle, Jönsson, Hogmark. Ni-P electrodeposition were obtained by varying the elaboration time. The analytic models obtained by theoretical means, by applying the corresponding formulas to each model have been compared to the experimental results obtained at hardness tests.

  3. Analytical model for thin-film SOI PIN-diode leakage current

    Science.gov (United States)

    Schmidt, Andrei; Dreiner, Stefan; Vogt, Holger; Goehlich, Andreas; Paschen, Uwe

    2017-04-01

    An analytical model for the thin-film silicon-on-insulator pin-diode leakage current is presented. Particularly the back-gate potential influence on the leakage current is addressed. The two-dimensional Poisson equation is simplified and then solved including the influence of the back-gate potential. Subsequently the analytical model is verified by comparison with numerical simulation and measurements. For the verification of the model the dependence on the back-gate potential, reverse voltage, device geometry, doping concentration and -polarity is considered. In this procedure the interface recombination velocity is used as fitting parameter. The model verification shows an accurate modeling of the leakage current at full depletion in combination with a back-gate potential dependence. The usage of the model is limited to back-gate and reverse potentials close to full depletion state of the pin-diode.

  4. An Analytical Planning Model to Estimate the Optimal Density of Charging Stations for Electric Vehicles.

    Directory of Open Access Journals (Sweden)

    Yongjun Ahn

    Full Text Available The charging infrastructure location problem is becoming more significant due to the extensive adoption of electric vehicles. Efficient charging station planning can solve deeply rooted problems, such as driving-range anxiety and the stagnation of new electric vehicle consumers. In the initial stage of introducing electric vehicles, the allocation of charging stations is difficult to determine due to the uncertainty of candidate sites and unidentified charging demands, which are determined by diverse variables. This paper introduces the Estimating the Required Density of EV Charging (ERDEC stations model, which is an analytical approach to estimating the optimal density of charging stations for certain urban areas, which are subsequently aggregated to city level planning. The optimal charging station's density is derived to minimize the total cost. A numerical study is conducted to obtain the correlations among the various parameters in the proposed model, such as regional parameters, technological parameters and coefficient factors. To investigate the effect of technological advances, the corresponding changes in the optimal density and total cost are also examined by various combinations of technological parameters. Daejeon city in South Korea is selected for the case study to examine the applicability of the model to real-world problems. With real taxi trajectory data, the optimal density map of charging stations is generated. These results can provide the optimal number of chargers for driving without driving-range anxiety. In the initial planning phase of installing charging infrastructure, the proposed model can be applied to a relatively extensive area to encourage the usage of electric vehicles, especially areas that lack information, such as exact candidate sites for charging stations and other data related with electric vehicles. The methods and results of this paper can serve as a planning guideline to facilitate the extensive

  5. An Analytical Planning Model to Estimate the Optimal Density of Charging Stations for Electric Vehicles.

    Science.gov (United States)

    Ahn, Yongjun; Yeo, Hwasoo

    2015-01-01

    The charging infrastructure location problem is becoming more significant due to the extensive adoption of electric vehicles. Efficient charging station planning can solve deeply rooted problems, such as driving-range anxiety and the stagnation of new electric vehicle consumers. In the initial stage of introducing electric vehicles, the allocation of charging stations is difficult to determine due to the uncertainty of candidate sites and unidentified charging demands, which are determined by diverse variables. This paper introduces the Estimating the Required Density of EV Charging (ERDEC) stations model, which is an analytical approach to estimating the optimal density of charging stations for certain urban areas, which are subsequently aggregated to city level planning. The optimal charging station's density is derived to minimize the total cost. A numerical study is conducted to obtain the correlations among the various parameters in the proposed model, such as regional parameters, technological parameters and coefficient factors. To investigate the effect of technological advances, the corresponding changes in the optimal density and total cost are also examined by various combinations of technological parameters. Daejeon city in South Korea is selected for the case study to examine the applicability of the model to real-world problems. With real taxi trajectory data, the optimal density map of charging stations is generated. These results can provide the optimal number of chargers for driving without driving-range anxiety. In the initial planning phase of installing charging infrastructure, the proposed model can be applied to a relatively extensive area to encourage the usage of electric vehicles, especially areas that lack information, such as exact candidate sites for charging stations and other data related with electric vehicles. The methods and results of this paper can serve as a planning guideline to facilitate the extensive adoption of electric

  6. Effective carrying capacity and analytical solution of a particular case of the Richards-like two-species population dynamics model

    Science.gov (United States)

    Cabella, Brenno Caetano Troca; Ribeiro, Fabiano; Martinez, Alexandre Souto

    2012-02-01

    We consider a generalized two-species population dynamic model and analytically solve it for the amensalism and commensalism ecological interactions. These two-species models can be simplified to a one-species model with a time dependent extrinsic growth factor. With a one-species model with an effective carrying capacity one is able to retrieve the steady state solutions of the previous one-species model. The equivalence obtained between the effective carrying capacity and the extrinsic growth factor is complete only for a particular case, the Gompertz model. Here we unveil important aspects of sigmoid growth curves, which are relevant to growth processes and population dynamics.

  7. Analytical model of optical field distribution of thin disk laser with thermal-optical aberration gain medium

    Science.gov (United States)

    Zhu, Guangzhi; Qiu, Yuli; Wang, Zexiong; Zhu, Xiao; Zhu, Changhong

    2016-08-01

    An analytical model is developed to analyze the optical field distribution of thin disk laser with a thermal-optical aberration gain medium. The fundamental mode field distribution is calculated by using the eigenvector method of the resonator transit matrix for different pumping parameters. The analytical results show that the uniformity of the pumping spot is an important factor that impacts the beam quality of thin disk laser. The uniform pumping spot is beneficial to decrease thermal aberration and Optical Path Difference (OPD) of thin disk crystal, and to improve the beam quality. However, the beam quality still decreases slightly with the increasing of pumping intensity under the uniform pumping condition. The main reason for degradation of beam quality is the aspherical part of OPD which leads to diffraction losses of the resonator and wavefront deformation.

  8. Evaluating and Improving Semi-analytic modelling of Dust in Galaxies based on Radiative Transfer Calculations

    CERN Document Server

    Fontanot, Fabio; Silva, Laura; Monaco, Pierluigi; Skibba, Ramin; 10.1111/j.1365-2966.2008.14126.x

    2009-01-01

    The treatment of dust attenuation is crucial in order to compare the predictions of galaxy formation models with multiwavelength observations. Most past studies have either used simple analytic prescriptions or else full radiative transfer (RT) calculations. Here, we couple star formation histories and morphologies predicted by the semi-analytic galaxy formation model MORGANA with RT calculations from the spectrophotometric and dust code GRASIL to create a library of galaxy SEDs from the UV/optical through the far Infrared, and compare the predictions of the RT calculations with analytic prescriptions. We consider a low and high redshift sample, as well as an additional library constructed with empirical, non-cosmological star formation histories and simple (pure bulge or disc) morphologies. Based on these libraries, we derive fitting formulae for the effective dust optical depth as a function of galaxy physical properties such as metallicity, gas mass, and radius. We show that such fitting formulae can predi...

  9. Hybrid Hot Strip Rolling Force Prediction using a Bayesian Trained Artificial Neural Network and Analytical Models

    OpenAIRE

    Abdelkrim Moussaoui; Yacine Selaimia; Hadj A. Abbassi

    2006-01-01

    The authors discuss the combination of an Artificial Neural Network (ANN) with analytical models to improve the performance of the prediction model of finishing rolling force in hot strip rolling mill process. The suggested model was implemented using Bayesian Evidence based training algorithm. It was found that the Bayesian Evidence based approach provided a superior and smoother fit to the real rolling mill data. Completely independent set of real rolling data were used to evaluate the capa...

  10. Analytical Charge Voltage Model in MOS Inversion Layer Based on Space Charge Capacitance

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    The concept of Space Charge Capacitance (SCC) is proposed and used to make a novel analytical charge model of quantized inversion layer in MOS structures. Based on SCC,continuous expressions of surface potential and inversion layer carrier density are derived.Quantum mechanical effects on both inversion layer carrier density and surface potential are extensively included. The accuracy of the model is verified by the numerical solution to Schrodinger and Poisson equation and the model is demonstrated,too.

  11. Experimental identification and analytical modelling of human walking forces: Literature review

    Science.gov (United States)

    Racic, V.; Pavic, A.; Brownjohn, J. M. W.

    2009-09-01

    Dynamic forces induced by humans walking change simultaneously in time and space, being random in nature and varying considerably not only between different people but also for a single individual who cannot repeat two identical steps. Since these important aspects of walking forces have not been adequately researched in the past, the corresponding lack of knowledge has reflected badly on the quality of their mathematical models used in vibration assessments of pedestrian structures such as footbridges, staircases and floors. To develop better force models which can be used with more confidence in the structural design, an adequate experimental and analytical approach must be taken to account for their complexity. This paper is the most comprehensive review published to date, of 270 references dealing with different experimental and analytical characterizations of human walking loading. The source of dynamic human-induced forces is in fact in the body motion. To date, human motion has attracted a lot of interest in many scientific branches, particularly in medical and sports science, bioengineering, robotics, and space flight programs. Other fields include biologists of various kinds, physiologists, anthropologists, computer scientists (graphics and animation), human factors and ergonomists, etc. It resulted in technologically advanced tools that can help understanding the human movement in more detail. Therefore, in addition to traditional direct force measurements utilizing a force plate and an instrumented treadmill, this review also introduces methods for indirect measurement of time-varying records of walking forces via combination of visual motion tracking (imaging) data and known body mass distribution. The review is therefore an interdisciplinary article that bridges the gaps between biomechanics of human gait and civil engineering dynamics. Finally, the key reason for undertaking this review is the fact that human-structure dynamic interaction and

  12. Semi-analytic models for the CANDELS survey: comparison of predictions for intrinsic galaxy properties

    Energy Technology Data Exchange (ETDEWEB)

    Lu, Yu; Wechsler, Risa H. [Kavli Institute for Particle Astrophysics and Cosmology, Physics Department, and SLAC National Accelerator Laboratory, Stanford University, Stanford, CA 94305 (United States); Somerville, Rachel S. [Department of Physics and Astronomy, Rutgers University, 136 Frelinghuysen Road, Piscataway, NJ 08854 (United States); Croton, Darren [Centre for Astrophysics and Supercomputing, Swinburne University of Technology, P.O. Box 218, Hawthorn, VIC 3122 (Australia); Porter, Lauren; Primack, Joel; Moody, Chris [Department of Physics, University of California at Santa Cruz, Santa Cruz, CA 95064 (United States); Behroozi, Peter S.; Ferguson, Henry C. [Space Telescope Science Institute, 3700 San Martin Drive, Baltimore, MD 21218 (United States); Koo, David C.; Guo, Yicheng [UCO/Lick Observatory, Department of Astronomy and Astrophysics, University of California, Santa Cruz, CA 95064 (United States); Safarzadeh, Mohammadtaher; White, Catherine E. [Department of Physics and Astronomy, The Johns Hopkins University, 3400 North Charles Street, Baltimore, MD 21218 (United States); Finlator, Kristian [Dark Cosmology Centre, Niels Bohr Institute, University of Copenhagen, DK-2100 Copenhagen (Denmark); Castellano, Marco; Sommariva, Veronica, E-mail: luyu@stanford.edu, E-mail: rwechsler@stanford.edu [INAF-Osservatorio Astronomico di Roma, via Frascati 33, I-00040 Monteporzio (Italy)

    2014-11-10

    We compare the predictions of three independently developed semi-analytic galaxy formation models (SAMs) that are being used to aid in the interpretation of results from the CANDELS survey. These models are each applied to the same set of halo merger trees extracted from the 'Bolshoi' high-resolution cosmological N-body simulation and are carefully tuned to match the local galaxy stellar mass function using the powerful method of Bayesian Inference coupled with Markov Chain Monte Carlo or by hand. The comparisons reveal that in spite of the significantly different parameterizations for star formation and feedback processes, the three models yield qualitatively similar predictions for the assembly histories of galaxy stellar mass and star formation over cosmic time. Comparing SAM predictions with existing estimates of the stellar mass function from z = 0-8, we show that the SAMs generally require strong outflows to suppress star formation in low-mass halos to match the present-day stellar mass function, as is the present common wisdom. However, all of the models considered produce predictions for the star formation rates (SFRs) and metallicities of low-mass galaxies that are inconsistent with existing data. The predictions for metallicity-stellar mass relations and their evolution clearly diverge between the models. We suggest that large differences in the metallicity relations and small differences in the stellar mass assembly histories of model galaxies stem from different assumptions for the outflow mass-loading factor produced by feedback. Importantly, while more accurate observational measurements for stellar mass, SFR and metallicity of galaxies at 1 < z < 5 will discriminate between models, the discrepancies between the constrained models and existing data of these observables have already revealed challenging problems in understanding star formation and its feedback in galaxy formation. The three sets of models are being used to construct catalogs

  13. Analytical Model to Describe the Thermal Behavior of a Heat Discharge System in Roofs

    Directory of Open Access Journals (Sweden)

    Hernández-Gómez V.H.

    2012-01-01

    Full Text Available The present study proposes an analytical model which describes the thermal behavior of a heat discharge system in roof, when the surfaces that constitute it are not translucent. Such a model derives from a thermal balance carried out to a heat discharge system in roofs. To validate it, an experimental prototype that allows simulating the thermal behavior of a heat discharge system in wall and roof was used, and the results were compared to those obtained with the proposed analytical model. It was found that the thermal behavior of the analytical model is similar to the thermal behavior of the experimental prototype; a worthless variation was detected among their respective outcome (The difference of temperatures can be caused by the heat transfer coefficient, of which no studies defining its behavior accurately have been found. Therefore, it can be considered that the proposed analytical model can be employed to simulate the thermal behavior of a heat discharge system in roofs when the surfaces that constitute it are opaque.

  14. Comparing analytical and Monte Carlo optical diffusion models in phosphor-based X-ray detectors

    Science.gov (United States)

    Kalyvas, N.; Liaparinos, P.

    2014-03-01

    Luminescent materials are employed as radiation to light converters in detectors of medical imaging systems, often referred to as phosphor screens. Several processes affect the light transfer properties of phosphors. Amongst the most important is the interaction of light. Light attenuation (absorption and scattering) can be described either through "diffusion" theory in theoretical models or "quantum" theory in Monte Carlo methods. Although analytical methods, based on photon diffusion equations, have been preferentially employed to investigate optical diffusion in the past, Monte Carlo simulation models can overcome several of the analytical modelling assumptions. The present study aimed to compare both methodologies and investigate the dependence of the analytical model optical parameters as a function of particle size. It was found that the optical photon attenuation coefficients calculated by analytical modeling are decreased with respect to the particle size (in the region 1- 12 μm). In addition, for particles sizes smaller than 6μm there is no simultaneous agreement between the theoretical modulation transfer function and light escape values with respect to the Monte Carlo data.

  15. Coupled thermodynamic-dynamic semi-analytical model of free piston Stirling engines

    Energy Technology Data Exchange (ETDEWEB)

    Formosa, F., E-mail: fabien.formosa@univ-savoie.f [Laboratoire SYMME, Universite de Savoie, BP 80439, 74944 Annecy le Vieux Cedex (France)

    2011-05-15

    Research highlights: {yields} The free piston Stirling behaviour relies on its thermal and dynamic features. {yields} A global semi-analytical model for preliminary design is developed. {yields} The model compared with NASA-RE1000 experimental data shows good correlations. -- Abstract: The study of free piston Stirling engine (FPSE) requires both accurate thermodynamic and dynamic modelling to predict its performances. The steady state behaviour of the engine partly relies on non linear dissipative phenomena such as pressure drop loss within heat exchangers which is dependant on the temperature within the associated components. An analytical thermodynamic model which encompasses the effectiveness and the flaws of the heat exchangers and the regenerator has been previously developed and validated. A semi-analytical dynamic model of FPSE is developed and presented in this paper. The thermodynamic model is used to define the thermal variables that are used in the dynamic model which evaluates the kinematic results. Thus, a coupled iterative strategy has been used to perform a global simulation. The global modelling approach has been validated using the experimental data available from the NASA RE-1000 Stirling engine prototype. The resulting coupled thermodynamic-dynamic model using a standardized description of the engine allows efficient and realistic preliminary design of FPSE.

  16. Constraints on the ωπ form factor from analyticity and unitarity

    Science.gov (United States)

    Ananthanarayan, B.; Caprini, Irinel; Kubis, Bastian

    2016-05-01

    Form factors are important low-energy quantities and an accurate knowledge of these sheds light on the strong interactions. A variety of methods based on general principles have been developed to use information known in different energy regimes to constrain them in regions where experimental information needs to be tested precisely. Here we review our recent work on the electromagnetic ωπ form factor in a model-independent framework known as the method of unitarity bounds, partly motivated by the discrepancies noted recently between the theoretical calculations of the form factor based on dispersion relations and certain experimental data measured from the decay ω → π0γ∗. We have applied a modified dispersive formalism, which uses as input the discontinuity of the ωπ form factor calculated by unitarity below the ωπ threshold and an integral constraint on the square of its modulus above this threshold. The latter constraint was obtained by exploiting unitarity and the positivity of the spectral function of a QCD correlator, computed on the spacelike axis by operator product expansion and perturbative QCD. An alternative constraint is obtained by using data available at higher energies for evaluating an integral of the modulus squared with a suitable weight function. From these conditions we derived upper and lower bounds on the modulus of the ωπ form factor in the region below the ωπ threshold. The results confirm the existence of a disagreement between dispersion theory and experimental data on the ωπ form factor around 0.6 GeV, including those from NA60 published in 2016.

  17. A Physically Based Analytical Model to Predict Quantized Eigen Energies and Wave Functions Incorporating Penetration Effect

    CERN Document Server

    Chowdhury, Nadim; Azim, Zubair Al; Alam, Md Hasibul; Niaz, Iftikhar Ahmad; Khosru, Quazi D M

    2014-01-01

    We propose a physically based analytical compact model to calculate Eigen energies and Wave functions which incorporates penetration effect. The model is applicable for a quantum well structure that frequently appears in modern nano-scale devices. This model is equally applicable for both silicon and III-V devices. Unlike other models already available in the literature, our model can accurately predict all the eigen energies without the inclusion of any fitting parameters. The validity of our model has been checked with numerical simulations and the results show significantly better agreement compared to the available methods.

  18. Class-modelling in food analytical chemistry: Development, sampling, optimisation and validation issues - A tutorial.

    Science.gov (United States)

    Oliveri, Paolo

    2017-08-22

    Qualitative data modelling is a fundamental branch of pattern recognition, with many applications in analytical chemistry, and embraces two main families: discriminant and class-modelling methods. The first strategy is appropriate when at least two classes are meaningfully defined in the problem under study, while the second strategy is the right choice when the focus is on a single class. For this reason, class-modelling methods are also referred to as one-class classifiers. Although, in the food analytical field, most of the issues would be properly addressed by class-modelling strategies, the use of such techniques is rather limited and, in many cases, discriminant methods are forcedly used for one-class problems, introducing a bias in the outcomes. Key aspects related to the development, optimisation and validation of suitable class models for the characterisation of food products are critically analysed and discussed. Copyright © 2017 Elsevier B.V. All rights reserved.

  19. Analytic State Space Model for an Unsteady Finite-Span Wing

    Science.gov (United States)

    Izraelevitz, Jacob; Zhu, Qiang; Triantafyllou, Michael

    2015-11-01

    Real-time control of unsteady flows, such as force control in flapping wings, requires simple wake models that easily translate into robust control designs. We analytically derive a state-space model for the unsteady trailing vortex system behind a finite aspect-ratio flapping wing. Contrary to prior models, the downwash and lift distributions over the span can be arbitrary, including tip effects. The wake vorticity is assumed to be a fully unsteady distribution, with the exception of quasi-steady (no rollup) geometry. Each discretization along the span has one to four states to represent the local unsteady wake-induced downwash, lift, and circulation. The model supports independently time-varying velocity, heave, and twist along the span. We validate this state-space model through comparison with existing analytic solutions for elliptic wings and an unsteady inviscid panel method.

  20. Assessing vocational outcome expectancy in individuals with serious mental illness: a factor-analytic approach.

    Science.gov (United States)

    Iwanaga, Kanako; Umucu, Emre; Wu, Jia-Rung; Yaghmaian, Rana; Lee, Hui-Ling; Fitzgerald, Sandra; Chan, Fong

    2017-07-04

    Self-determination theory (SDT) and self-efficacy theory (SET) can be used to conceptualize self-determined motivation to engage in mental health and vocational rehabilitation (VR) services and to predict recovery. To incorporate SDT and SET as a framework for vocational recovery, developing and validating SDT/SET measures in vocational rehabilitation is warranted. Outcome expectancy is an important SDT/SET variable affecting rehabilitation engagement and recovery. The purpose of this study was to validate the Vocational Outcome Expectancy Scale (VOES) for use within the SDT/SET vocational recovery framework. One hundred and twenty-four individuals with serious mental illness (SMI) participated in this study. Measurement structure of the VOES was evaluated using exploratory factor analysis (EFA) and confirmatory factor analysis (CFA). Both EFA and CFA results supported a two-factor structure: (a) positive outcome expectancy, and (b) negative outcome expectancy. The internal consistency reliability coefficients for both factors were acceptable. In addition, positive outcome expectancy correlated stronger than negative outcome expectancy with other SDT/SET constructs in the expected directions. The VOES is a brief, reliable and valid instrument for assessing vocational outcome expectancy in individuals with SMI that can be integrated into SDT/SET as a vocational rehabilitation engagement and recovery model in psychiatric rehabilitation.