Best Management Practice, Fact Sheet 2. Sheet Flow to Open Space

OpenAIRE

Sample, David; Doumar, Lia

2013-01-01

This publication explains what sheet flow to open space is, where and how it is used, their limitations, routine and nonroutine maintenance, expected costs, and a glossary of terms. This fact sheet is one of a 15-part series on urban stormwater management practices.

2012 Swimming Season Fact Sheets

Science.gov (United States)

To help beachgoers make informed decisions about swimming at U.S. beaches, EPA annually publishes state-by-state data about beach closings and advisories for the previous year's swimming season. These fact sheets summarize that information by state.

16 CFR 460.13 - Fact sheets.

Science.gov (United States)

2010-01-01

... INSULATION § 460.13 Fact sheets. If you are a manufacturer, you must give retailers and installers fact... uses. (b) A heading: “This is ____ insulation.” Fill in the blank with the type and form of your... compressed during installation.” (e) After the chart and any statement dealing with the specific type of...

Creutzfeldt-Jakob Disease Fact Sheet for Healthcare Workers and Morticians

Science.gov (United States)

... here Home » Disorders » Patient & Caregiver Education » Fact Sheets Creutzfeldt-Jakob Disease Fact Sheet for Healthcare Workers and Morticians Creutzfeldt-Jakob disease (CJD) is a rare, fatal brain disorder that ...

Clean Cities Fact Sheet

Energy Technology Data Exchange (ETDEWEB)

2004-01-01

This fact sheet explains the Clean Cities Program and provides contact information for all coalitions and regional offices. It answers key questions such as: What is the Clean Cities Program? What are alternative fuels? How does the Clean Cities Program work? What sort of assistance does Clean Cities offer? What has Clean Cities accomplished? What is Clean Cities International? and Where can I find more information?

Autism: General Information. Fact Sheet Number 1 = Autismo: Informacion General. Fact Sheet Number 22.

Science.gov (United States)

Interstate Research Associates, McLean, VA.

This fact sheet on autism is offered in both English and Spanish, and is the same in both languages although numbered differently. It provides a definition, information on incidence, typical characteristics, and educational implications. It notes that autism is listed as a separate category under the Individuals with Disabilities Education Act.…

75 FR 24740 - Recovery Fact Sheet RP9580.102, Permanent Relocation

Science.gov (United States)

2010-05-05

... DEPARTMENT OF HOMELAND SECURITY Federal Emergency Management Agency [Docket ID FEMA-2010-0028] Recovery Fact Sheet RP9580.102, Permanent Relocation AGENCY: Federal Emergency Management Agency, DHS... Management Agency (FEMA). DATES: This fact sheet is effective April 14, 2010. ADDRESSES: This final fact...

Nanotechnology for Site Remediation: Fact Sheet

Science.gov (United States)

This fact sheet presents a snapshot of nanotechnology and its current uses in remediation. It presents information to help site project managers understand the potential applications of this group of technologies at their sites.

HIV/AIDS Clinical Trials Fact Sheet

Science.gov (United States)

... AIDS Drugs Clinical Trials Apps skip to content HIV Overview Home Understanding HIV/AIDS Fact Sheets HIV/ ... 4 p.m. ET) Send us an email HIV/AIDS Clinical Trials Last Reviewed: August 25, 2017 ...

Catalog of CERCLA applicable or relevant and appropriate requirements (ARARs) - fact sheets

Energy Technology Data Exchange (ETDEWEB)

1990-07-01

Section 121(d) of the Comprehensive Environmental Response Compensation and Liability Act (CERCLA) as amended by the Superfund Amendments and Reauthorization Act of 1986 (SARA), requires attainment of federal and state applicable or relevant and appropriate requirements (ARARs). Subpart E, Section 300.400(g) {open_quotes}Identification of applicable or relevant and appropriate requirements{close_quotes} of the National Oil and Hazardous Substances Pollution Contingency Plan (NCP)(55 FR 8666, March 8, 1990) describes the process for attaining ARARs. The purpose of this catalog is to provide DOE Program Offices and Field Organizations with all of the {open_quotes}Quick Reference Fact Sheets{close_quotes} on attaining ARARS. These fact sheets provide overviews of ARARs for CERCLA cleanup actions pertinent to DOE environmental restoration activities. All of the fact sheets in this catalog were prepared by the Environmental Protection Agency`s Office of Solid Waste and Emergency Response. Fact sheets 1-7 discuss land disposal restrictions (LDRs) and their applicability. LDRs may pertain to a number of CERCLA response actions at DOE facilities. Fact Sheets 8-13 are based on the CERCLA Compliance with Other Laws Manual: Parts I and II and provide an overview of many other CERCLA ARARs. Overview of ARARs-Focus on ARAR Waivers (fact sheet 11), provides a good introduction to ARARS. The last two fact sheets, 14 and 15, are periodic reports that describe additional fact sheets and clarify issues.

Epilepsy: General Information. Fact Sheet Number 6 = La Epilepsia: Informacion General. Fact Sheet Number 20.

Science.gov (United States)

Interstate Research Associates, McLean, VA.

This fact sheet on epilepsy is offered in both English and Spanish. It provides a definition, information on incidence, typical characteristics, and educational implications. It notes that epilepsy is classified as "other health impaired" under the Individuals with Disabilities Education Act and that students with epilepsy are eligible for special…

Biomolecular Science (Fact Sheet)

Energy Technology Data Exchange (ETDEWEB)

2012-04-01

A brief fact sheet about NREL Photobiology and Biomolecular Science. The research goal of NREL's Biomolecular Science is to enable cost-competitive advanced lignocellulosic biofuels production by understanding the science critical for overcoming biomass recalcitrance and developing new product and product intermediate pathways. NREL's Photobiology focuses on understanding the capture of solar energy in photosynthetic systems and its use in converting carbon dioxide and water directly into hydrogen and advanced biofuels.

Spina Bifida. Fact Sheet = Espina Bifida. Hojas Informativas Sobre Discapacidades.

Science.gov (United States)

National Information Center for Children and Youth with Disabilities, Washington, DC.

This fact sheet offers definitions of the three types of spina bifida (spina bifida occulta, meningocele, and myelomeningocele), outlines their incidence, describes characteristics of individuals with spina bifida, and reviews educational implications. The fact sheet discusses the need for many children with myelomeningocele to learn to manage…

Supporting Documentation for the 2008 Update to the Insulation Fact Sheet

Energy Technology Data Exchange (ETDEWEB)

Stovall, Therese K [ORNL

2008-02-01

The Insulation Fact Sheet provides consumers for general guidance and recommended insulation levels for their home. This fact sheet has been on-line since 1995 and this update addresses new insulation materials, as well as updated costs for energy and materials.

75 FR 13777 - Disaster Assistance Fact Sheet DAP9580.107, Child Care Services

Science.gov (United States)

2010-03-23

...] Disaster Assistance Fact Sheet DAP9580.107, Child Care Services AGENCY: Federal Emergency Management Agency... (FEMA) is providing notice of the availability of the final Disaster Assistance Fact Sheet DAP9580.107...'s Web site at http://www.fema.gov . You may also view a hard copy of the fact sheet at the Office of...

Photovoltaics Fact Sheet

Energy Technology Data Exchange (ETDEWEB)

None

2016-02-01

This fact sheet is an overview of the Photovoltaics (PV) subprogram at the U.S. Department of Energy SunShot Initiative. The U.S. Department of Energy (DOE)’s Solar Energy Technologies Office works with industry, academia, national laboratories, and other government agencies to advance solar PV, which is the direct conversion of sunlight into electricity by a semiconductor, in support of the goals of the SunShot Initiative. SunShot supports research and development to aggressively advance PV technology by improving efficiency and reliability and lowering manufacturing costs. SunShot’s PV portfolio spans work from early-stage solar cell research through technology commercialization, including work on materials, processes, and device structure and characterization techniques.

Advancing Concentrating Solar Power Research (Fact Sheet)

Energy Technology Data Exchange (ETDEWEB)

None, None

2014-02-01

Researchers at the National Renewable Energy Laboratory (NREL) provide scientific, engineering, and analytical expertise to help advance innovation in concentrating solar power (CSP). This fact sheet summarizes how NREL is advancing CSP research.

Fact Sheets: Air Toxics Rules for the Manufacture of Amino/Phenolic Resins

Science.gov (United States)

This page contains a December 1999 fact sheet for the proposed National Emission Standards for Hazardous Air Pollutants (NESHAP): Manufacture of Amino/Phenolic Resins and a September 2014 fact sheet with information regarding the final NESHAP

Spina Bifida: General Information. Fact Sheet Number 12 = La Espina Bifida: Informacion General. Fact Sheet Number 21.

Science.gov (United States)

Interstate Research Associates, McLean, VA.

This fact sheet on spina bifida is offered in both English and Spanish. It provides definitions of the three types of spina bifida (spina bifida occulta, meningocele, and myelomeningocele). Incidence figures are given as are typical characteristics of children with spina bifida. Educational implications are briefly noted, including the need to…

Hispanics/Latinos & Cardiovascular Disease: Statistical Fact Sheet

Science.gov (United States)

Statistical Fact Sheet 2013 Update Hispanics/Latinos & Cardiovascular Diseases Cardiovascular Disease (CVD) (ICD/10 codes I00-I99, Q20-Q28) (ICD/9 codes 390-459, 745-747)  Among Mexican-American adults age 20 ...

College Experience and Volunteering. Fact Sheet

Science.gov (United States)

Marcelo, Karlo Barrios

2007-01-01

College experience and volunteering are positively correlated. Measurable differences in civic activity exist between young people who attend college and young people who do not. This fact sheet explores volunteering as civic engagement among youth with college experience, ages 19-25, which was down for the second year in a row in 2006. The…

Large Fleets Lead in Petroleum Reduction (Fact Sheet)

Energy Technology Data Exchange (ETDEWEB)

Proc, H.

2011-03-01

Fact sheet describes Clean Cities' National Petroleum Reduction Partnership, an initiative through which large private fleets can receive support from Clean Cities to reduce petroleum consumption.

Chemical Data Reporting Fact Sheet: Chemicals Snapshot

Science.gov (United States)

This fact sheet provides a brief overview of the chemical manufacturing, processing, and use information collected for the 2012 Chemical Data Reporting (CDR) rule. Users do not have access to the complete CDR data set and should draw conclusions with care.

Cerebral Palsy. Fact Sheet = La Paralisis Cerebral. Hojas Informativas Sobre Discapacidades.

Science.gov (United States)

National Information Center for Children and Youth with Disabilities, Washington, DC.

This fact sheet on cerebral palsy is written in both English and Spanish. First, it provides a definition of cerebral palsy and considers various causes (e.g., an insufficient amount of oxygen reaching the fetal or newborn brain). The fact sheet then offers incidence figures and explains characteristics of the three main types of cerebral palsy:…

World War II Informational Fact Sheets.

Science.gov (United States)

Department of Defense, Washington, DC.

This commemorative book provides numerous fact sheets on various aspects of World War II, both on the fighting front and the homefront. Replicas of posters of the war era, descriptions of battles with maps, contributions of women and minorities to the war effort, even music of the wartime era, add to this collection of resource materials useful to…

Vietnamese Hurricane Response Fact Sheets

Science.gov (United States)

Các tờ dữ kiện được cung cấp nơi đây mô tả vai trò của EPA trong việc đáp ứng với bão và cách các chương trình cụ thể cung cấp sự hỗ trợ. The Vietnamese fact sheets provided here describe EPA's role in a hurricane response.

Are we reaching the target audience? Evaluation of a fish fact sheet.

Science.gov (United States)

Burger, J; Waishwell, L

2001-09-28

According to the US Environmental Protection Agency, over 16% of freshwater lakes and 7% of the rivers are under some sort of fish consumption advisory because of the presence of toxic chemicals. There is considerable interest in the issuing of information, advisories, and fact sheets concerning the consumption of wild-caught fish from contaminated waters, and in the actual consumption patterns of subsistence and recreational anglers. Despite the large number of consumption advisories issued by state agencies, there is little information on how these advisories, or other forms of risk communication, are perceived by target audiences, notably fishermen and women of child-bearing age. The states of South Carolina and Georgia issue consumption advisories for fish from the Savannah River, among other sites. To gain a greater insight into the perception of anglers about a supplemental fish fact sheet jointly developed by South Carolina, Georgia, federal agencies, and the Consortium for Risk Evaluation with Stakeholder Participation, we interviewed fisherman along the Savannah River. The objectives were to determine: (1) whether they had previously read the Fish Fact Sheet or had heard about the consumption advisories; (2) what major message they obtained from the sheet; (3) who they felt the fact sheet was aimed at, and who should get the Fish Fact Sheet; (4) who should be concerned about health risks from consuming the fish; and (5) the best method of disseminating such information. We interviewed 92 fishermen (37% black, 62% white) during the fishing season of 1999. Half had heard some information about consumption advisories, mainly from the media (64%). The study concluded that there were no ethnic differences in whether they had heard about the advisories, understood the major message of the fact sheet, felt they could reduce their risk from consuming the fish, or felt that it made a difference which agency issued the fact sheet. There were significant ethnic

Renewable Energy Project Development Assistance (Fact Sheet)

Energy Technology Data Exchange (ETDEWEB)

2013-07-01

This fact sheet provides information on the Tribes selected to receive assistance from the U.S. Department of Energy Office of Indian Energy 2013 Strategic Technical Assistance Response Team (START) Program, which provides technical expertise to support the development of next-generation energy projects on tribal lands.

Down Syndrome: General Information. Fact Sheet Number 4 = El Sindrome de Down: Informacion General. Fact Sheet Number 15.

Science.gov (United States)

Interstate Research Associates, McLean, VA.

This fact sheet on Down Syndrome is offered in both English and Spanish. First it provides a definition and description of this syndrome, noting its etiology in a chromosomal abnormality. Incidence figures are then given. Typical characteristics of people with Down Syndrome are listed. Commonly associated health-related problems are noted,…

Canada and the Kyoto Protocol: Fact Sheet No. 5 - Developing countries

International Nuclear Information System (INIS)

2000-11-01

This fact sheet acknowledges that global change affects developed and developing countries alike, and the fact that most developing countries do not have the human, financial and technical capacity to effectively address climate change issues without help from the industrialized nations. The fact sheet also puts Canada on record as being in agreement with the spirit of the Kyoto Protocol to encourage the participation of developing countries in global efforts to combat climate change and promote sustainable development and reaffirms Canada's willingness to provide financial and technical assistance to developing countries to enable them to play a meaningful part in this global effort. In this context, the fact sheet briefly describes the new Canada Climate Change Development Fund which has been set up to reduce the growth of GHG emissions and support carbon sink activities in developing countries, to strengthen the capacity of developing conuntries to reduce their vulnerability to adverse effects of climate change, and to participate in global efforts to combat them

TSCA Chemical Data Reporting Fact Sheet: Imported Articles

Science.gov (United States)

This fact sheet provides guidance and sample reporting scenarios on the reporting exemption for the import of a chemical substance as part of an article, for purposes of the Chemical Data Reporting (CDR) rule.

Toxicity of Pesticides. Agrichemical Fact Sheet 2.

Science.gov (United States)

Hock, Winand K.

This fact sheet gives the acute oral and dermal toxicity (LD 50) of over 250 pesticides in lab animals. The chemicals are categorized as fungicides, herbicides, insecticides, or miscellaneous compounds. One or more trade names are given for each pesticide. In addition, a brief explanation of toxicity determination is given. (BB)

Soft Costs Fact Sheet

Energy Technology Data Exchange (ETDEWEB)

None

2016-05-01

This fact sheet is an overview of the systems integration subprogram at the U.S. Department of Energy SunShot Initiative. Soft costs can vary significantly as a result of a fragmented energy marketplace. In the U.S., there are 18,000 jurisdictions and 3,000 utilities with different rules and regulations for how to go solar. The same solar equipment may vary widely in its final installation price due to process and market variations across jurisdictions, creating barriers to rapid industry growth. SunShot supports the development of innovative solutions that enable communities to build their local economies and establish clean energy initiatives that meet their needs, while at the same time creating sustainable solar market conditions.

77 FR 40626 - RP9580.210, Personal Assistance Services in Shelters Fact Sheet

Science.gov (United States)

2012-07-10

... DEPARTMENT OF HOMELAND SECURITY Federal Emergency Management Agency [Docket ID FEMA-2012-0014] RP9580.210, Personal Assistance Services in Shelters Fact Sheet AGENCY: Federal Emergency Management... Management Agency (FEMA) is accepting comments on Recovery Fact Sheet RP9580.210, Personal Assistance...

SunShot Initiative Fact Sheet

Energy Technology Data Exchange (ETDEWEB)

DOE Solar Energy Technologies Office

2015-04-01

The U.S. Department of Energy (DOE) SunShot Initiative is a collaborative national effort launched in 2011 that aggressively drives innovation to make solar energy fully cost competitive with traditional energy sources before the end of the decade. The SunShot fact sheet outlines goals and successes of the program as it works with private companies, universities, non-profit organizations, state and local governments, and national laboratories to drive down the cost of solar electricity to $0.06 per kilowatt-hour, without incentives, by the year 2020.

Digital Learning in California's K-12 Schools. Just the Facts

Science.gov (United States)

Gao, Niu

2015-01-01

This fact page briefly discusses the following facts on digital learning in California's K-12: (1) As California implements new tests in its K-12 schools, technology infrastructure is a key concern; (2) Many districts are confident that they had enough bandwidth for online field tests; (3) Digital learning will require significantly greater…

TSCA Chemical Data Reporting Fact Sheet: Articles

Science.gov (United States)

This fact sheet provides guidance on classifying articles under the Toxic Substances Control Act (TSCA) and determining the applicability of EPA’s articles exclusion policy for purposes of the Chemical Data Reporting (CDR) rule. The primary goal of this document is to help the regulated community comply with the requirements of the CDR rule.

SunShot Catalyst Prize Competition Fact Sheet

Energy Technology Data Exchange (ETDEWEB)

Solar Energy Technologies Office

2015-04-01

This fact sheet is an overview of the Catalyst Energy Innovation Prize, an open innovation program launched in 2014 by the U.S. Department of Energy SunShot Initiative. This program aims to catalyze the rapid creation and development of products and solutions that address near-term challenges in the U.S. solar energy marketplace.

Careers "Fact Sheets" for clinical engineering & biomedical technology.

Science.gov (United States)

Pacela, A F

1991-01-01

Three Careers "Fact Sheets" include information on CE and BMET job titles, job descriptions, and certification. These materials are intended to aid in furthering professional recognition for Clinical Engineers and BMETs, and may be useful in communicating with Administration or Human Resources departments.

Systems Integration Fact Sheet

Energy Technology Data Exchange (ETDEWEB)

None

2016-06-01

This fact sheet is an overview of the Systems Integration subprogram at the U.S. Department of Energy SunShot Initiative. The Systems Integration subprogram enables the widespread deployment of safe, reliable, and cost-effective solar energy technologies by addressing the associated technical and non-technical challenges. These include timely and cost-effective interconnection procedures, optimal system planning, accurate prediction of solar resources, monitoring and control of solar power, maintaining grid reliability and stability, and many more. To address the challenges associated with interconnecting and integrating hundreds of gigawatts of solar power onto the electricity grid, the Systems Integration program funds research, development, and demonstration projects in four broad, interrelated focus areas: grid performance and reliability, dispatchability, power electronics, and communications.

General Information about Learning Disabilities (Fact Sheet Number 7) = Informacion General sobre Impedimentos en el Aprendizaje (Fact Sheet Number 19).

Science.gov (United States)

Interstate Research Associates, Inc., Washington, DC.

This fact sheet providing general information about learning disabilities is presented in both English and Spanish versions. It begins with the federal definition of learning disabilities and a discussion of its implications followed by estimates of incidence. Typical characteristics of students with learning disabilities are then summarized as…

Final Rule for Industrial Process Cooling Towers: Fact Sheet

Science.gov (United States)

Fact sheet concerning a final rule to reduce air toxics emissions from industrial process cooling towers. Air toxics are those pollutants known or suspected of causing cancer or other serious health effects.

Facts about food irradiation. A series of fact sheets from the International Consultative Group on Food Irradiation

Energy Technology Data Exchange (ETDEWEB)

NONE

1991-12-01

The safety and benefits of foods processed by ionizing radiation are well documented. In an effort to provide governments, especially those of developing countries, with scientifically accurate information on issues of general interest to the public, the International Consultative Group on Food Irradiation (ICGFI), which was established under the aegis of the Food and Agriculture Organization of the United Nations (FAO), the World Health Organization (WHO), and the IAEA, decided at its 7th Annual Meeting in Rome, Italy, on October 1990, to issue a series of ''Fact Sheets'' on the subject. ICGFI, an inter-governmental body with a membership of 37 governments, has as one of its mandates the function to provide information to Member States of the FAO, WHO, and IAEA and to the three organizations themselves on the safe and proper use of food irradiation technology. The Fact Sheets included here cover issues relating to: status and trends; scientific and technical terms; food irradiation and radioactivity; chemical changes in irradiated food; nutritional quality of irradiated foods; genetic studies; microbiological safety of irradiated food; irradiation and food safety; irradiation and food additives and residues; packaging of irradiated foods; safety of irradiation facilities; controlling the process; food irradiation costs; and irradiated foods and the consumer. The Fact Sheets have been separately indexed and included in the INIS Database under Reference Numbers 23011206-23011217, 23011319 and 23012743. The Fact Sheets were first issued by the ICGFI Secretariat (Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture, Vienna, Austria) in May 1991.

Facts about food irradiation. A series of fact sheets from the International Consultative Group on Food Irradiation

International Nuclear Information System (INIS)

1991-12-01

The safety and benefits of foods processed by ionizing radiation are well documented. In an effort to provide governments, especially those of developing countries, with scientifically accurate information on issues of general interest to the public, the International Consultative Group on Food Irradiation (ICGFI), which was established under the aegis of the Food and Agriculture Organization of the United Nations (FAO), the World Health Organization (WHO), and the IAEA, decided at its 7th Annual Meeting in Rome, Italy, on October 1990, to issue a series of ''Fact Sheets'' on the subject. ICGFI, an inter-governmental body with a membership of 37 governments, has as one of its mandates the function to provide information to Member States of the FAO, WHO, and IAEA and to the three organizations themselves on the safe and proper use of food irradiation technology. The Fact Sheets included here cover issues relating to: status and trends; scientific and technical terms; food irradiation and radioactivity; chemical changes in irradiated food; nutritional quality of irradiated foods; genetic studies; microbiological safety of irradiated food; irradiation and food safety; irradiation and food additives and residues; packaging of irradiated foods; safety of irradiation facilities; controlling the process; food irradiation costs; and irradiated foods and the consumer. The Fact Sheets have been separately indexed and included in the INIS Database under Reference Numbers 23011206-23011217, 23011319 and 23012743. The Fact Sheets were first issued by the ICGFI Secretariat (Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture, Vienna, Austria) in May 1991

Epilepsy. Fact Sheet = Epilepsia. Hojas Informativas Sobre Discapacidades.

Science.gov (United States)

National Information Center for Children and Youth with Disabilities, Washington, DC.

This fact sheet, written in both English and Spanish, provides a definition, information on incidence, typical characteristics, and educational implications of epilepsy. It notes that epilepsy is classified as "other health impaired" under the Individuals with Disabilities Education Act (IDEA) and that children with epilepsy or seizure disorders…

OPA Q's and A's: Overview of the Oil Pollution Act of 1990. Fact sheet

International Nuclear Information System (INIS)

1991-12-01

The OPA Q's and A's are part of a series of fact sheets that provide up-to-date information on EPA's implementation of the OPA. The first fact sheet provides an overview of the various provisions of the OPA and the Agency's responsibilities under the new law

Teenage Pregnancy. Highlights: An ERIC/CAPS Fact Sheet.

Science.gov (United States)

Lachance, Laurie L.

This fact sheet addresses the issue of teenage pregnancy. Six factors contributing to the current attention focused on teenage pregnancy and parenthood are listed and teenage pregnancy and birth rates are discussed. Other areas covered include teenage nonuse of contraception, sex education by schools and parents, family planning services, and the…

Energy-Saving Opportunities for Manufacturing Companies, International Fact Sheet (Spanish)

Energy Technology Data Exchange (ETDEWEB)

2010-08-01

This English/Spanish fact sheet describes the Industrial Technologies Program Save Energy Now model and provides information on tools and resources to help manufacturing facilities reduce industrial energy intensity.

Participation in Sports and Civic Engagement. Fact Sheet

Science.gov (United States)

Lopez, Mark Hugo; Moore, Kimberlee

2006-01-01

One reason to offer sports in school is to teach youth the values, skills, and habits that will make them more active, engaged, and responsible citizens. Past evidence on the civic effects of sports is mixed, but points to some potential positive civic effects. This fact sheet uses recent data from the 2002 National Youth Survey of Civic…

Supporting documentation for the 1997 revision to the DOE Insulation Fact Sheet

Energy Technology Data Exchange (ETDEWEB)

Stovall, T.K.

1997-08-22

The Department of Energy (DOE) Insulation Fact Sheet has been revised to reflect developments in energy conservation technology and the insulation market. A nationwide insulation cost survey was made by polling insulation contractors and builders, and the results are reported here. These costs, along with regional weather data, regional fuel costs, and fuel-specific system efficiencies were used to produce recommended insulation levels for new and existing houses. This report contains all of the methodology, algorithms, assumptions, references, and data resources that were used to produce the 1997 DOE Insulation Fact Sheet.

CMS fact sheet : to give an overview of the basic facts on the CMS Detector, its aims and collaboration

CERN Multimedia

CMS, Outreach

2010-01-01

2-sided color print A4 size sheet containing the facts on the CMS Detector, its name, what it is designed to do, questions scientists hope to answer, collaboration members, detector parts and their functions, and other miscellaneous facts on the CMS detector

Child Care in Sweden. Fact Sheets on Sweden.

Science.gov (United States)

Swedish Inst., Stockholm.

This fact sheet outlines Sweden's policies of government-supported child care and parental insurance provisions. Swedish families receive: (1) free maternity and child health care; (2) child allowances for each child of 9,000 krona per year through age 16; (3) up to 450 days of paid parental leave for the birth of a child, with 360 days paid at 90…

State Arts Agency Fact Sheet: Support for Arts Education

Science.gov (United States)

Online Submission, 2015

2015-01-01

This national overview of state arts agency grants and services for arts education includes summary statistics and geographic distribution. The fact sheet uses data from Final Descriptive Reports of state arts agency grant-making activities submitted annually to the National Assembly of State Arts Agencies (NASAA) and the National Endowment for…

Fact Sheet: What Parents Need to Know About Zika Virus

Science.gov (United States)

... Management Post-Disaster Child Care Resources ACF Capabilities Policies Resources You are here ACF Home › Office of Human Services Emergency Preparedness and Response › Resource Library › Fact Sheet: What Parents Need to Know About ...

75 FR 45144 - Recovery Fact Sheet 9580.203, Debris Monitoring

Science.gov (United States)

2010-08-02

... DEPARTMENT OF HOMELAND SECURITY Federal Emergency Management Agency [Docket ID FEMA-2010-0045] Recovery Fact Sheet 9580.203, Debris Monitoring AGENCY: Federal Emergency Management Agency, DHS. ACTION: Notice of availability; request for comments. SUMMARY: The Federal Emergency Management Agency (FEMA) is...

75 FR 33821 - Recovery Fact Sheet RP9580.205, Public Assistance Funding to Public Housing Facilities

Science.gov (United States)

2010-06-15

... Emergency Management Agency (FEMA) is providing notice of the availability of the final Recovery Fact Sheet... the fact sheet at the Office of Chief Counsel, Federal Emergency Management Agency, Room 835, 500 C... DEPARTMENT OF HOMELAND SECURITY Federal Emergency Management Agency [Docket ID FEMA-2010-0034...

Clean Energy Solutions Center Services (Vietnamese Translation) (Fact Sheet)

Energy Technology Data Exchange (ETDEWEB)

2014-11-01

This is the Vietnamese language translation of the Clean Energy Solutions Center (Solutions Center) fact sheet. The Solutions Center helps governments, advisors and analysts create policies and programs that advance the deployment of clean energy technologies. The Solutions Center partners with international organizations to provide online training, expert assistance, and technical resources on clean energy policy.

Clean Energy Solutions Center Services (Arabic Translation) (Fact Sheet)

Energy Technology Data Exchange (ETDEWEB)

2014-06-01

This is the Arabic translation of the Clean Energy Solutions Center Services fact sheet. The Clean Energy Solutions Center (Solutions Center) helps governments, advisors and analysts create policies and programs that advance the deployment of clean energy technologies. The Solutions Center partners with international organizations to provide online training, expert assistance, and technical resources on clean energy policy.

African American Students and U.S. High Schools. Fact Sheet

Science.gov (United States)

Alliance for Excellent Education, 2008

2008-01-01

This fact sheet highlights the statistics of the status of the African American students living in the continental United States in terms of: population; graduation, dropouts, and preparedness; schools, segregation, and teacher quality; and special, gifted, and college preparatory education. According to the National Center for Education…

Fact sheet on thyroid test in Fukushima prefecture

International Nuclear Information System (INIS)

Hiranuma, Yuri

2017-01-01

Fukushima Prefecture chose about 360,000 people who were 18 years old or younger at the time of the accident at Fukushima Daiichi NPS on March 11, 2011, and started thyroid test as part of the prefectural health survey on October 9, 2011. The survey is entrusted to Fukushima Medical University of Medicine from Fukushima Prefecture. This fact sheet summarizes the current state of thyroid test in Fukushima Prefecture. A considerable amount of data and related information have been accumulated in the seventh year from the beginning. However, especially the information disclosed in English by people concerned combined the results of the second round, which was not analyzed properly, with those of the first round. This fact gives a suspicion of intention to deny the possibility of radiation influence in such a way as to make it invisible even if there was the influence. This study firstly prepared an English fact sheet to convey the actual situation in English. However, since some official information/views were contained in papers only available in English, this study also prepared the Japanese version for enabling to grasp the current situation. The Japanese version is supplemented with explanation rather than the Japanese translation of the English version, in order to make it easier to understand. The future of thyroid test is a topic that is causing controversy. Now that the transparency, scientific fairness, and the data integrity of Fukushima Medical University are suspected, it is extremely important that an independent analysis in the true sense is to be performed by qualified experts based on the latest evidence. (A.O.)

Fact Sheet: Alternative Low-Sulfur Diesel Fuel Transition Program for Alaska

Science.gov (United States)

This fact sheet summarizes EPA's final rule modifying the diesel fuel regulations to apply an effective date of 6-1-2010 for 15 ppm sulfur requirements for highway, nonroad, locomotive and marine diesel fuel produced/imported for, distributed

Drinking water regulations under the Safe Drinking Water Act. Fact sheet

International Nuclear Information System (INIS)

1990-12-01

The fact sheet describes the requirements covered under the 1986 amendments to the Safe Drinking Water Act. Levels of various contaminants (including radio nuclides) are explained. Also discussed are the Surface Water Treatment Rule and the Total Coliforms Rule

Delinquency Cases in Juvenile Court, 2002. OJJDP Fact Sheet #02

Science.gov (United States)

Stahl, Anne L.

2006-01-01

This fact sheet presents statistics on delinquency cases processed by juvenile courts in 2002. The number of delinquency cases handled by juvenile courts decreased 11 percent between 1997 and 2002. During this time, the number of person offense cases decreased 2 percent, property offense cases decreased 27 percent, drug law violation cases…

Juvenile Delinquency Probation Caseload, 1985-2002. OJJDP Fact Sheet #04

Science.gov (United States)

Livsey, Sarah

2006-01-01

This fact sheet presents statistics on delinquency cases resulting in probation, 2002. Probation was the disposition in 38 percent of all delinquency cases processed by the juvenile courts in 2002. The number of cases placed on probation increased 44 percent between 1985 and 2002. Property offense cases made up the greatest proportion of the…

EERE-Supported International Activities in Latin America (Fact Sheet)

Energy Technology Data Exchange (ETDEWEB)

2010-05-01

The Office of Energy Efficiency and Renewable Energy (EERE) is involved in a variety of international initiatives, partnerships, and events that promote greater understanding and use of renewable energy (RE) and energy efficiency (EE) worldwide. In support of the Energy and Climate Partnership of the Americas (ECPA), EERE is working with several Latin American countries to advance EE and RE deployment for economic growth, energy security, poverty relief, and disaster recovery goals. This fact sheet highlights those activities.

Fact Sheets and Questions and Answers for the Final Air Toxics Rules for the Aerospace Manufacturing and Rework Industry

Science.gov (United States)

This page contains the July 1995 final rule fact sheet and the January 2015 proposed rule fact sheet that contains information on the National Emission Standards for Aerospace Manufacturing and Rework Facilities, as well as a 2001 Q&A document on the rule

Fact sheet: National primary drinking water regulations for lead and copper

International Nuclear Information System (INIS)

1991-05-01

The Fact Sheet contains a summary of what the regulations will do, establish, and provide; regulatory impact in regards to benefits and costs; treatment technique requirements; tap water monitoring for lead and copper; water quality monitoring (other than lead and copper); monitoring schedules, regulatory schedules for large, medium-sized, and small systems

Fact Sheet - Final Air Toxics Rule for Gold Mine Ore Processing and Production

Science.gov (United States)

Fact sheet summarizing main points of National Emissions Standards for Hazardous Air Pollutants for gold ore processing and production facilities, the seventh largest source of mercury air emission in the United States.

Human Trafficking of Children in the United States: A Fact Sheet

Science.gov (United States)

US Department of Education, 2007

2007-01-01

This fact sheet presents questions and answers related to the human trafficking of children in the United States. It describes human trafficking and its extent in the United States, how human traffickers target children for coerced labor and sex exploitation, how to identify victims of human trafficking, how to report a suspected incidence of…

Framework for DOE mixed low-level waste disposal: Site fact sheets

Energy Technology Data Exchange (ETDEWEB)

Gruebel, M.M.; Waters, R.D.; Hospelhorn, M.B.; Chu, M.S.Y. [eds.

1994-11-01

The Department of Energy (DOE) is required to prepare and submit Site Treatment Plans (STPS) pursuant to the Federal Facility Compliance Act (FFCAct). Although the FFCAct does not require that disposal be addressed in the STPS, the DOE and the States recognize that treatment of mixed low-level waste will result in residues that will require disposal in either low-level waste or mixed low-level waste disposal facilities. As a result, the DOE is working with the States to define and develop a process for evaluating disposal-site suitability in concert with the FFCAct and development of the STPS. Forty-nine potential disposal sites were screened; preliminary screening criteria reduced the number of sites for consideration to twenty-six. The DOE then prepared fact sheets for the remaining sites. These fact sheets provided additional site-specific information for understanding the strengths and weaknesses of the twenty-six sites as potential disposal sites. The information also provided the basis for discussion among affected States and the DOE in recommending sites for more detailed evaluation.

Young People and Political Campaigning on the Internet. CIRCLE Fact Sheet.

Science.gov (United States)

Levine, Peter; Lopez, Mark Hugo

2004-01-01

This fact sheet discusses young people and political campaigning on the Internet. It explains how the Internet has become a powerful force in political campaigns. A survey released by the Pew Research Center for the People & the Press on January 11, 2004 found that the Internet is gaining importance as a source of political news, especially for…

Servicios del Centro de Soluciones Para la Energia Limpia (Fact Sheet)

Energy Technology Data Exchange (ETDEWEB)

2014-05-01

This is the Spanish translation of the Clean Energy Solutions Center Services fact sheet. The Clean Energy Solutions Center (Solutions Center) helps governments, advisors and analysts create policies and programs that advance the deployment of clean energy technologies. The Solutions Center partners with international organizations to provide online training, expert assistance, and technical resources on clean energy policy.

Fact Sheet- Ancient DNA: What is it? Why is it Important?

OpenAIRE

Alexa Walker; George Nicholas; Daryl Pullman; Alan Goodman; Bioarchaeology and Genetics Working Group

2016-01-01

As genetic research is increasingly applied to new areas of study, including in archaeological and heritage contexts, a range of questions arise concerning the social, ethical, legal, and political implications of ancient DNA. This fact sheet explains the nature and challenges of aDNA research, and why information from it is important and relevant to people today. 

Fact Sheet: Notice of Ambient Water Quality Criteria Document for Tributyltin (TBT) - Final

Science.gov (United States)

Information pertaining to 2004 Final Acute and Chronic Ambient Aquatic Life Water Quality Criteria for Tributyltin (TBT) for freshwater and saltwater. This fact sheet includes the safe levels of TBT that should protect the majority of species.

NTPR Fact Sheets

Science.gov (United States)

History Documents US Underground Nuclear Test History Reports NTPR Radiation Exposure Reports Enewetak Atoll Cleanup Documents TRAC About Who We Are Our Values History Locations Our Leadership Director Support Center Contact Us FAQ Sheet Links Success Stories Contracts Business Opportunities Current

Questions and Answers about School-Age Children in Self-Care: A Sloan Work and Family Research Network Fact Sheet

Science.gov (United States)

Sloan Work and Family Research Network, 2009

2009-01-01

The Sloan Work and Family Research Network has prepared Fact Sheets that provide statistical answers to some important questions about work-family and work-life issues. This Fact Sheet includes statistics about Children in Self-Care, and answers the following questions about school-age children in self-care: (1) How many school-age children are in…

Systems Performance Analyses of Alaska Wind-Diesel Projects; Kotzebue, Alaska (Fact Sheet)

Energy Technology Data Exchange (ETDEWEB)

Baring-Gould, I.

2009-04-01

This fact sheet summarizes a systems performance analysis of the wind-diesel project in Kotzebue, Alaska. Data provided for this project include wind turbine output, average wind speed, average net capacity factor, and optimal net capacity factor based on Alaska Energy Authority wind data, estimated fuel savings, and wind system availability.

Preliminary digital geologic maps of the Mariposa, Kingman, Trona, and Death Valley Sheets, California

International Nuclear Information System (INIS)

D'Agnese, F.A.; Faunt, C.C.; Turner, A.K.

1995-01-01

Parts of four 1:250,000-scale geologic maps by the California Department of Natural Resources, Division of Mines and Geology have been digitized for use in hydrogeologic characterization. These maps include the area of California between lat. 35 degree N; Long. 115 degree W and lat. 38 degree N, long. 118 degree W of the Kingman Sheet (Jennings, 1961), Trona Sheet (Jennings and others, 1962), Mariposa Sheet (Strand, 1967), and Death Valley Sheet (Streitz and Stinson, 1974). These digital maps are being released by the US Geological Survey in the ARC/INFO Version 6.1 Export format. The digitized data include geologic unit boundaries, fault traces, and identity of geologic units. The procedure outlined in US Geological Survey Circular 1054 (Soller and others, 1990) was sued during the map construction. The procedure involves transferring hard-copy data into digital format by scanning manuscript maps, manipulating the digital map data, and outputting the data. Most of the work was done using Environmental Systems Research Institute's ARC/INFO software. The digital maps are available in ARC/INFO Rev. 6.1 Export format, from the USGS, Yucca Mountain Project, in Denver, Colorado

Fuels planning: science synthesis and integration; social issues fact sheet 08: The "Golden Rule" and other lessons on communicating about hazards

Science.gov (United States)

Rocky Mountain Research Station USDA Forest Service

2004-01-01

Other fact sheets identified considerations for communicating about hazards, talked about the importance of working locally, and discussed the seven laws of effective hazard communication. This fact sheet introduces the "Golden Rule" of hazard communication and shares some final lessons from hazard educators.

San Jose, California: Evaluating Local Solar Energy Generation Potential (City Energy: From Data to Decisions)

Energy Technology Data Exchange (ETDEWEB)

Office of Strategic Programs, Strategic Priorities and Impact Analysis Team

2017-09-29

This fact sheet "San Jose, California: Evaluating Local Solar Energy Generation Potential" explains how the City of San Jose used data from the U.S. Department of Energy's Cities Leading through Energy Analysis and Planning (Cities-LEAP) and the State and Local Energy Data (SLED) programs to inform its city energy planning. It is one of ten fact sheets in the "City Energy: From Data to Decisions" series.

Fuels planning: science synthesis and integration; social issues fact sheet 09: Benefits of collaboration

Science.gov (United States)

Christine Esposito

2006-01-01

Wildland fire professionals at the Federal, State, and local levels have a long tradition of collaborating across agencies and jurisdictions to achieve goals that they could not achieve independently. This fact sheet discusses the reasons and resources for collaboration.Other...

Fuels planning: science synthesis and integration; social issues fact sheet 10: Stages of collaboration

Science.gov (United States)

Christine Esposito

2006-01-01

Collaboration is a powerful tool for improving both the management of wildland fire and the overall health of forests and other elements of fire-dependent ecosystems. This fact sheet discusses seven stages that are typical of most collaborations.Other publications in this...

Final Rule to Reduce Hazardous Air Emissions from Newly Built Stationary Combustion Turbines: Fact Sheet

Science.gov (United States)

This page contains an August 2003 fact sheet with information regarding the National Emissions Standards for Hazardous Air Pollutants (NESHAP) for Stationary Combustion Turbines. This document provides a summary of the information for this NESHAP.

Ancient DNA (aDNA): What is it? Why is it important?- Fact Sheet

OpenAIRE

Alexa Walker; George Nicholas; Daryl Pullman; Alan Goodman; Bioarchaeology and Genetics Working Group

2014-01-01

As genetic research is increasingly applied to new areas of study, including in archaeological and heritage contexts, a range of questions arise concerning the social, ethical, legal, and political implications of ancient DNA. This fact sheet explains the nature and challenges of aDNA research, and why information from it is important and relevant to people today.  

TSCA Chemical Data Reporting Fact Sheet: Reporting Manufactured Chemical Substances from Metal Mining and Related Activities

Science.gov (United States)

This fact sheet provides guidance on the Chemical Data Reporting (CDR) rule requirements related to the reporting of mined metals, intermediates, and byproducts manufactured during metal mining and related activities.

Canada and the Kyoto Protocol: Fact Sheet No. 1 - Overview

International Nuclear Information System (INIS)

2000-11-01

This fact sheet outlines the principles underlying Canada's position at the sixth Conference of Parties (COP6) regarding climate change. Capsule descriptions of the Canadian view on carbon sinks (advocating a broader inclusion of sink activities), application of the flexibility mechanisms (the Clean Development Mechanism, Joint Implementation and International Emissions Trading), the issue of compliance (Canada favoring strong incentives to ensure compliance), and strengthening the capacity of developing countries to enhance their contribution to fighting climate change (Canada acknowledging that capacity building and technology transfer needs to be a central part of the global approach to combating climate change)

ATLAS Fact Sheet : To raise awareness of the ATLAS detector and collaboration on the LHC

CERN Multimedia

ATLAS Outreach

2010-01-01

Facts on the Detector, Calorimeters, Muon System, Inner Detector, Pixel Detector, Semiconductor Tracker, Transition Radiation Tracker,, Surface hall, Cavern, Detector, Magnet system, Solenoid, Toroid, Event rates, Physics processes, Supersymmetric particles, Comparing LHC with Cosmic rays, Heavy ion collisions, Trigger and Data Acquisition TDAQ, Computing, the LHC and the ATLAS collaboration. This fact sheet also contains images of ATLAS and the collaboration as well as a short list of videos on ATLAS available for viewing.

Guidelines for Home Energy Upgrade Professionals: Standard Work Specifications for Multifamily Energy Upgrades (Fact Sheet)

Energy Technology Data Exchange (ETDEWEB)

2011-08-01

This fact sheet provides essential information about the 2011 publication of the Workforce Guidelines for Multifamily Home Energy Upgrades, including their origin, their development with the help of industry leaders to create the standard work specifications for retrofit work.

Fuels planning: science synthesis and integration; social issues fact sheet 11: Challenges to collaboration

Science.gov (United States)

Christine Esposito

2006-01-01

Bringing the right people into a collaborative process can be difficult. Potential collaborators must all feel they have something to gain to justify investing resources, sharing knowledge, and perhaps compromising on goals and actions. This fact sheet discusses some of the common challenges that individuals, communities, and institutions face in collaboration.

Technical fact sheets on the impacts of new energy efficiency technologies and measures in ice rinks

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-07-01

This paper presents energy efficiency facts on ice rinks and arenas to advise and inform refrigeration and building professionals. The aim of the paper was to facilitate estimation and compare impacts of various energy efficiency measures and new technologies on the consumption of energy and the reduction of greenhouse gas (GHG) emissions. A computer-based tool modelling ice rink energy consumption was constructed based on DOE-2.1E software. The simulation tool was developed to study the sensitivity of various eco-energetic technologies applied to arenas. Results of the simulations have made it possible to construct 8 facts sheets, including information on simulated heat exchange; calculation of energy consumption for heating and refrigeration; the incorporation of several types of Heating Ventilation and Air Conditioning (HVAC) systems; and to show various strategies of operation. To account for the effects of ice within a building, calculation routines in the form of functional values were added. The model addressed the following parameters: climate; characteristics of the envelope; lighting power and intensity; temperature of the resurfacing water; ice sheet temperature; humidity level of the ice rink; fresh air intake; emissivity index of the ceiling above the ice sheet; refrigeration systems according to type, capacity, output and operation mode; capacity output and operation mode of the air heating system, including heat recovery from the refrigeration system; and capacity, output and operation mode of the domestic and resurfacing hot water heating system, including heat recovery from the refrigeration system. Fact sheets were presented for the type of technology; description; direct or indirect benefits; energy-savings potential; environmental impacts; specific comments from specialists; and a set of charts to facilitate comprehension. tabs., figs.

Fuels planning: science synthesis and integration; economic uses fact sheet 01: mastication treatments and costs

Science.gov (United States)

Rocky Mountain Research Station USDA Forest Service

2004-01-01

Mastication, or mulching, is a mechanical fuel treatment that changes the structure and size of fuels in the stand. This fact sheet describes the kinds of equipment available, where mastication should be used, and treatment factors affecting cost.Other publications in this...

Final Rule to Reduce Toxic Air Emissions from Asphalt Processing and Asphalt Roofing Manufacturing Facilities Fact Sheet

Science.gov (United States)

This page contains a February 2003 fact sheet with information regarding the National Emissions Standards for Hazardous Air Pollutants (NESHAP) for Asphalt Processing and Asphalt Roofing Manufacturing.

Fuels planning: science synthesis and integration; economic uses fact sheet 06: selection criteria analysis

Science.gov (United States)

Rocky Mountain Research Station USDA Forest Service

2004-01-01

Confidence in decisionmaking can often come from knowing if others in similar circumstances would choose the same management strategy. Researchers at the USDA FS Pacific Northwest Research Station and the University of Saskatchewan have developed a Selection Criteria Analysis for answering this very question. This fact sheet discusses factors affecting the choice of...

Catalogue of Energy Efficiency Measures for France: descriptive fact sheets

International Nuclear Information System (INIS)

2012-06-01

ADEME wished to learn about existing effective energy efficiency measures implemented outside of France, whether cross-sectoral or targeted at a specific sector (industry, transport, buildings or agriculture). The objective of this survey was to determine whether any of these measures could be applied in France, with the goal of holding down the growth of energy consumption. This survey has led to the writing of a catalog of 53 two-page fact sheets describing the measures identified as interesting for France. These measures were analysed via classic criteria of evaluation such as cost-efficiency or impact, allowing to highlight the most successful measures for the French territory

Fuels planning: science synthesis and integration; social issues fact sheet 12: Keys to successful collaboration

Science.gov (United States)

Christine Esposito

2006-01-01

Collaborating on fire and fuels management with a host of public and private partners may seem like an impossible undertaking, and presents many challenges. This fact sheet reviews tips for what to focus on as you embark on a collaborative fuels management project.Other...

Women, Work and Health Hazards: A Fact Sheet and Cosmetologists: Health Risks at Work.

Science.gov (United States)

National Commission on Working Women, Washington, DC.

The first part of this document is a fact sheet that provides information on health hazards faced by employed women. It covers the Occupational Safety and Health Act (OSHA), job-related diseases suffered by workers in female-dominated occupations, employer responsibilities under OSHA, and the lack of statistical reporting on job-related disease.…

Fuels planning: science synthesis and integration; economic uses fact sheet 02: log hauling cost

Science.gov (United States)

Rocky Mountain Research Station USDA Forest Service

2004-01-01

Knowing the cost of fuel reduction treatments and associated activities, such as hauling cut trees, is essential for fire and fuels planning. This fact sheet explores the main factors that determine the cost of hauling cut trees and points the user to an interactive tool that can help plan for those and other expenses.

Long-Term Consequences for Teens with Older Sexual Partners. Fact Sheet. Publication #2008-16

Science.gov (United States)

Schelar, Erin; Ryan, Suzanne; Manlove, Jennifer

2008-01-01

Existing research on the risks of having sex at a young age with an older partner has focused on poorer reproductive health outcomes in the adolescent years, but scant attention has been paid to the longer-term implications of these relationships. Using survey data from high school students, this "Fact Sheet" presents findings from recent Child…

Fuels planning: science synthesis and integration; economic uses fact sheet 05: NEPA and economics

Science.gov (United States)

Rocky Mountain Research Station USDA Forest Service

2004-01-01

The National Environmental Policy Act (NEPA) is the law that requires Federal agencies to consider the environmental impacts of their actions, involve the public in the decisionmaking process, and disclose information, starting at the initial stages of planning. This fact sheet discusses when you should consider economics in the NEPA process, when to do an analysis,...

TSCA Chemical Data Reporting Fact Sheet: Chemical Substances which are the Subject of Certain TSCA Actions

Science.gov (United States)

This fact sheet provides guidance for people who may be subject to the Chemical Data Reporting (CDR) rule on how their requirements for reporting for 2016 may be affected when chemical substances are the subject of certain TSCA actions.

Fuels planning: science synthesis and integration; economic uses fact sheet 07: markets and log prices

Science.gov (United States)

Rocky Mountain Research Station USDA Forest Service

2004-01-01

Markets and prices for logs vary widely across the West, fluctuating from place to place in response to regional variables and hauling costs. This fact sheet discusses those variables, locality of log markets, markets for low-value logs, and caveats to consider when using My Fuel Treatment Planner.

Fuels planning: science synthesis and integration; forest structure and fire hazard fact sheet 02: fire hazard

Science.gov (United States)

Rocky Mountain Research Station USDA Forest Service

2004-01-01

Fire hazard reflects the potential fire behavior and magnitude of effects as a function of fuel conditions. This fact sheet discusses crown fuels, surface fuels, and ground fuels and their contribution and involvement in wildland fire.Other publications in this series...

Waste generation and pollution prevention progress fact sheet: Nevada Test Site

International Nuclear Information System (INIS)

1994-01-01

The Nevada Test Site is responsible for maintaining nuclear testing capability, supporting science-based Stockpile Stewardship experiments, maintaining nuclear agency response capability, applying environmental restoration techniques to areas affected by nuclear testing, managing low-level and mixed radioactive waste, investigating demilitarization technologies, investigating counter- proliferation technologies, supporting work-for-others programs and special Department of Defense activities, operating a hazardous materials spill test center, and providing for the commercial development of the site. This fact sheet provides information on routine waste generation and projected reduction by waste type. Also, materials recycled by the Nevada Test Site in 1994 are listed

Fuels planning: science synthesis and integration; social issues fact sheet 16: Prescribed fire and visual quality

Science.gov (United States)

Christine Esposito

2006-01-01

Research shows that, while prescribed burning and other fuels treatments can lower visual quality in some situations, they can also improve it in others. This fact sheet reviews the visual aspects of different levels of prescribed burning.Other publications in this series...

Fact sheet: Ethanol from corn

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-05-31

This fact sheet is intended to provide an overview of the advantages of ethanol from corn, emphasizing ethanol`s contribution to environmental protection and sustainable agriculture. Ethanol, an alternative fuel used as an octane enhancer is produced through the conversion of starch to sugars by enzymes, and fermentation of these sugars to ethanol by yeast. The production process may involve wet milling or dry milling. Both these processes produce valuable by-products, in addition to ethanol and carbon dioxide. Ethanol contains about 32,000 BTU per litre. It is commonly believed that using state-of-the-art corn farming and corn processing processes, the amount of energy contained in ethanol and its by-products would be more than twice the energy required to grow and process corn into ethanol. Ethanol represents the third largest market for Ontario corn, after direct use as animal feed and wet milling for starch, corn sweetener and corn oil. The environmental consequences of using ethanol are very significant. It is estimated that a 10 per cent ethanol blend in gasoline would result in a 25 to 30 per cent decrease in carbon monoxide emissions, a 6 to 10 per cent decrease in net carbon dioxide, a slight increase in nitrous oxide emissions which, however, would still result in an overall decrease in ozone formation, since the significant reduction in carbon monoxide emissions would compensate for any slight increase in nitrous oxide. Volatile organic compounds emission would also decrease by about 7 per cent with a 10 per cent ethanol blend. High level blends could reduce VOCs production by as much as 30 per cent. 7 refs.

Formation of sheeting joints in Yosemite National Park, California

Science.gov (United States)

Martel, S. J.

2009-04-01

The formation of sheeting joints (i.e., "exfoliation joints"), opening mode fractures subparallel to the Earth's surface, has been a classic unresolved problem in geology. Diverse new observations and analyses support the hypothesis that sheeting joints develop in response to a near-surface tension induced by compressive stresses parallel to a convex slope (hypothesis 1) rather than the conventional explanation that the joints form as a result of removal of overburden by erosion (hypothesis 2). The opening mode displacements across the joints together with the absence of mineral precipitates within the joints mean that sheeting joints open in response to a near-surface tension normal to the surface (N) rather than a pressurized fluid. An absolute tension must arise in the shallow subsurface if a plot of N as a function of depth normal to the surface (z) has a positive slope at the surface (z=0). The differential equations of static equilibrium require that this slope (derivative) equals k2 P22 + k3 P33 - ?g cosβ, where k2 and k3 are the principal curvatures of the surface, P22 and P33 are the respective surface-parallel normal stresses along the principal curvatures, ? is the material density, g is gravitational acceleration, and β is the slope. This derivative will be positive and sheeting joints can open if the surface-parallel stress in at least one direction is sufficiently compressive (negative) and the curvature in that direction is sufficiently convex (negative). Hypotheses 1 and 2 are being tested using geologic mapping and aerial LIDAR data from Yosemite National Park, California. The abundance of sheeting joints on convex ridges there, where erosion is a local minimum, coupled with their scarcity in the adjacent concave valleys, where erosion is a local maximum, is consistent with hypothesis 1 but inconsistent with hypothesis 2. At several sites with sheeting joints, measurements of the current topographic curvatures and the current surface

South Lake Tahoe, California: Using Energy Data to Partner on Building Energy Efficiency Actions (City Energy: From Data to Decisions)

Energy Technology Data Exchange (ETDEWEB)

Strategic Priorities and Impact Analysis Team, Office of Strategic Programs

2017-11-01

This fact sheet "South Lake Tahoe, California: Using Energy Data to Partner on Building Energy Efficiency Actions" explains how the City of South Lake Tahoe used data from the U.S. Department of Energy's Cities Leading through Energy Analysis and Planning (Cities-LEAP) and the State and Local Energy Data (SLED) programs to inform its city energy planning. It is one of ten fact sheets in the "City Energy: From Data to Decisions" series.

Opening the Door to the American Dream: Increasing Higher Education Access and Success for Immigrants. New York Fact Sheet

Science.gov (United States)

Erisman, Wendy; Looney, Shannon

2008-01-01

This fact sheet presents a snapshot of important facts that are specific to the state of New York from the "Opening the Door to the American Dream: Increasing Higher Education Access and Success for Immigrants" report, which exposes systemic barriers that prevent immigrants from entering college and/or completing bachelor's degrees…

Final Rule to Reduce Toxic Air Pollutants from Surface Coating of Plastic Parts and Products Fact Sheet

Science.gov (United States)

This page contains an August 2004 fact sheet with information regarding the final NESHAP for Surface Coating of Plastic Parts and Products. This document provides a summary of the information for the information for this regulation.

77 FR 2743 - Recovery Directorate Fact Sheet 9580.213, Residential Electrical Meter Repair-“Power Up”

Science.gov (United States)

2012-01-19

...] Recovery Directorate Fact Sheet 9580.213, Residential Electrical Meter Repair--``Power Up'' AGENCY: Federal..., Residential Electrical Meter Repair--``Power Up.'' DATES: Comments must be received by February 21, 2012... authority, FEMA may fund the repair of residential electrical meters damaged in a major disaster or...

Better Solar Cells and Manufacturing Processes Using NREL's Ultrafast Quantum Efficiency Method (Fact Sheet)

Energy Technology Data Exchange (ETDEWEB)

2011-08-01

Fact sheet on the FlashQE system, a 2011 R&D 100 Award winner. A solid-state optical system by NREL and Tau Science measures solar cell quantum efficiency in less than a second, enabling a suite of new capabilities for solar cell manufacturers.

Becoming Resilient: Disaster Planning and Recovery: NREL Experts Assist Before and After a Disaster (Fact Sheet)

Energy Technology Data Exchange (ETDEWEB)

Hotchkiss, E.

2014-08-01

This fact sheet provides information on how private industry; federal, state, and local governments; non-profit organizations; and communities can utilize NREL's expertise, tools, and innovations to incorporate energy efficiency and renewable energy into the planning, recovery, and rebuilding stages of disaster.

Fuels planning: science synthesis and integration; environmental consequences fact sheet 10: The Understory Response Model

Science.gov (United States)

Steve Sutherland; Melanie Miller

2005-01-01

The Understory Response Model is a species-specific computer model that qualitatively predicts change in total species biomass for grasses, forbs, and shrubs after thinning, prescribed fire, or wildfire. The model examines the effect of fuels management on plant survivorship and reproduction. This fact sheet identifies the intended users and uses, required inputs, what...

Fuels planning: science synthesis and integration; environmental consequences fact sheet 05: prescriptions and fire effects

Science.gov (United States)

Melanie Miller

2004-01-01

Fuels planning: science synthesis and integration; environmental consequences fact sheet 5: prescriptions and fire effects. Miller, Melanie. 2004. Res. Note RMRS-RN-23-5-WWW. Fort Collins, CO: U.S. Department of Agriculture, Forest Service, Rocky Mountain Research Station. 2 p. While our understanding of the causes for variation in postfire effects is increasing, burn...

Community Renewable Energy Deployment Provides Replicable Examples of Clean Energy Projects (Fact Sheet)

Energy Technology Data Exchange (ETDEWEB)

2012-09-01

This fact sheet describes the U.S. Department of Energy's Community Renewable Energy Deployment (CommRE) program, which is a more than $20 million effort funded through the American Recovery and Reinvestment Act of 2009, to promote investment in clean energy solutions and provide real-life examples for other local governments, campuses, and small utilities to replicate. Five community-based renewable energy projects received funding from DOE through the CommRE and their progress is detailed.

How Schools Responded to Student Mental Health Needs Following Hurricanes Katrina and Rita. Fact Sheet

Science.gov (United States)

RAND Corporation, 2007

2007-01-01

This fact sheet summarizes a study that examined how schools in the U.S. Gulf Coast region perceived the mental health needs of students after Hurricanes Katrina and Rita and how schools responded. According to the report, despite strong initial efforts to support the mental health needs of students displaced by Hurricanes Katrina and Rita, many…

Fuels planning: science synthesis and integration; economic uses fact sheet 04: My Fuel Treatment Planner

Science.gov (United States)

Rocky Mountain Research Station USDA Forest Service

2004-01-01

In the face of rapidly changing public and political attitudes toward fire and fuel planning, one thing remains constant: the fuel planner is ultimately responsible for making decisions on the land. This fact sheet discusses the options for fuel treatments, and the need, development, and use of the MS Excel-based tool, My Fuel Treatment Planner.

Fuels planning: science synthesis and integration; social issues fact sheet 06: Important considerations for communicating about hazards

Science.gov (United States)

Rocky Mountain Research Station USDA Forest Service

2004-01-01

Effective public education and communication campaigns about wildland fire and fuels management should have clear objectives, and use the right techniques to achieve these objectives. This fact sheet lists seven important considerations for planning or implementing a hazard communication effort.

Fuels planning: science synthesis and integration; economic uses fact sheet 03: economic impacts of fuel treatments

Science.gov (United States)

Rocky Mountain Research Station USDA Forest Service

2004-01-01

With increased interest in reducing hazardous fuels in dry inland forests of the American West, agencies and the public will want to know the economic impacts of fuel reduction treatments. This fact sheet discusses the economic impact tool, a component of My Fuel Treatment Planner, for evaluating economic impacts.

Fuels planning: science synthesis and integration; social issues fact sheet 03: Developing personal responsibility for fuels reduction: More ways to catch and hold people's attention

Science.gov (United States)

Rocky Mountain Research Station USDA Forest Service

2004-01-01

Other fact sheets discuss the different types of information that are useful in explaining to property owners the importance of taking personal responsibility for fuels management on their land. However, for some property owners, new information is not enough-they may need more information in order to understand that change is necessary. This fact sheet discusses ways...

Fuels planning: science synthesis and integration; social issues fact sheet 15: Landscape change and aesthetics

Science.gov (United States)

Christine Esposito

2006-01-01

Fuels management produces changes in the landscape that can impact scenic beauty. If people do not consider a forest to be scenic, they may think that the low scenic quality is a result of poor management or ecological health. This fact sheet looks at the relevency of the effects of natural and human-caused landscape changes, when planning fuels management.

Fuels planning: science synthesis and integration; environmental consequences fact sheet 11: Smoke Impact Spreadsheet (SIS) model

Science.gov (United States)

Trent Wickman; Ann Acheson

2005-01-01

The Smoke Impact Spreadsheet (SIS) is a simple-to-use planning model for calculating particulate matter (PM) emissions and concentrations downwind of wildland fires. This fact sheet identifies the intended users and uses, required inputs, what the model does and does not do, and tells the user how to obtain the model.

Final Air Toxics Standards for Clay Ceramics Manufacturing, Glass Manufacturing, and Secondary Nonferrous Metals Processing Area Sources Fact Sheet

Science.gov (United States)

This page contains a December 2007 fact sheet with information regarding the National Emissions Standards for Hazardous Air Pollutants (NESHAP) for Clay Ceramics Manufacturing, Glass Manufacturing, and Secondary Nonferrous Metals Processing Area Sources

Fuels planning: science synthesis and integration; environmental consequences fact sheet 01: Fire Effects Information System (FEIS)

Science.gov (United States)

Steve Sutherland

2004-01-01

The Fire Effects Information System (FEIS) provides accessible, up-to-date fire effects summaries, taken from current English-language literature, for almost 900 plant species, about 100 animal species, and 16 Kuchler plant communities found on the North American continent. This fact sheet discusses the development of FEIS and what is contained in the species summary....

Fuels planning: science synthesis and integration; social issues fact sheet 14: Landscape preference in forested ecosystems

Science.gov (United States)

Christine Esposito

2006-01-01

It is important to understand what types of landscape settings most people prefer to be able to plan fuels treatment and other forest management activities that will be acceptable to the general public. This fact sheet considers the four common elements of visually preferred forest settings: large trees; herbacious, smooth groundcover; open midstory canopy; and vistas...

State and Local Clean Energy Policy Primer: Getting from Here to Clean Electricity with Policy (Fact Sheet)

Energy Technology Data Exchange (ETDEWEB)

2011-04-01

This fact sheet proposes a framework for how states and localities can build policy portfolios by first setting the stage for clean energy in the market with low cost policies, and then growing the market with successive policies until the need for financial incentives can be reduced and eventually eliminated.

Training Sessions and Materials Present Ways to Improve System Efficiency: OIT Technical Assistance Fact Sheet: Training

International Nuclear Information System (INIS)

Ericksen, E.

1999-01-01

Interested in learning about innovative ways to improve the efficiency of your plant's steam, electric motor, and compressed air systems? This US Department of Energy Office of Industrial Technologies fact sheet offers information regarding training sessions, teleconferences, and various training materials to teach you and your company ways to reduce energy use, save money, and reduce waste and pollution through system optimization

Fuels planning: science synthesis and integration; social issues fact sheet 05: The importance of working locally

Science.gov (United States)

Rocky Mountain Research Station USDA Forest Service

2004-01-01

People who evaluate their actions in terms of what others think are often said to be guided by community norms. With respect to fuels management, this means that when you are "selling" a property owner on taking steps to reduce fuels, you are not just "selling" to one person, but to a network of people. This fact sheet discusses three tools to help...

Oil Notifications: Emergency Response Notification System (ERNS) fact sheet

International Nuclear Information System (INIS)

1992-04-01

The Emergency Response Notification System (ERNS) is a national computer database which provides the only centralized mechanism for documenting and verifying incident notification information as initially reported to the National Response Center (NRC), the U.S. Environmental Protection Agency (EPA), and to a limited extent, the U.S. Coast Guard (USCG). The initial notification data may be followed up with updated information from various Federal, State and local response authorities, as appropriate. ERNS contains data that can be used to analyze release notifications, support emergency planning efforts, and assist decision makers in developing spill prevention programs. The fact sheet provides summary information on notifications of releases of oil reported in accordance with the Clean Water Act (CWA). Under Section 311 of the CWA, discharges of oil which: (1) cause a sheen to appear on the surface of the water; (2) violate applicable water quality standards; or (3) cause sludge or emulsion to be deposited beneath the surface of the water or adjoining shoreline, must be reported to the NRC

Fuels planning: science synthesis and integration; environmental consequences fact sheet 08: Evaluating sedimentation risks associated with fuel management

Science.gov (United States)

William Elliot; Pete Robichaud

2005-01-01

This fact sheet describes the sources of sediment in upland forest watersheds in the context of fuel management activities. It presents the dominant forest soil erosion processes, and the principles behind the new sediment delivery interface developed to aid in erosion analysis of fuel management projects.

9/11 and the War on Terror in Curricula and in State Standards Documents. CIRCLE Fact Sheet

Science.gov (United States)

Stoddard, Jeremy; Hess, Diana

2011-01-01

This Fact Sheet reports findings from an ongoing study of the representation of 9/11 and terrorism in curricula, textbooks, and state standards documents. The study was conducted in three stages. The first two stages focused on how supplemental curricula and best-selling social studies textbooks published between 2002-2010 present the events of…

Fuels planning: science synthesis and integration; social issues fact sheet 18: Issues affecting social acceptability of fuels treatments

Science.gov (United States)

Christine Esposito

2006-01-01

Researchers have tried to understand how information about forest management can influence a person's landscape preferences and aesthetic appreciation. These findings are relevant for fuels management projects, since these projects are often characterized by conflicts between aesthetic and ecological objectives. This fact sheet discusses different aspects and ways...

Fuels planning: science synthesis and integration; social issues fact sheet 17: Considering social acceptability of fuels treatments

Science.gov (United States)

Christine Esposito

2006-01-01

When making decisions about fuels treatments, forest managers need to assess not only the biological impacts of a treatment, but the social impacts as well. Social acceptability is based on value judgments by people-their notions of what is "good" and what is "better." This fact sheet discusses six questions that may be useful for framing initial...

Using the Global Burden of Disease study to assist development of nation-specific fact sheets to promote prevention and control of hypertension and reduction in dietary salt: a resource from the World Hypertension League.

Science.gov (United States)

Campbell, Norm R C; Lackland, Daniel T; Lisheng, Liu; Niebylski, Mark L; Nilsson, Peter M; Zhang, Xin-Hua

2015-03-01

Increased blood pressure and high dietary salt are leading risks for death and disability globally. Reducing the burden of both health risks are United Nations' targets for reducing noncommunicable disease. Nongovernmental organizations and individuals can assist by ensuring widespread dissemination of the best available facts and recommended interventions for both health risks. Simple but impactful fact sheets can be useful for informing the public, healthcare professionals, and policy makers. The World Hypertension League has developed fact sheets on dietary salt and hypertension but in many circumstances the greatest impact would be obtained from national-level fact sheets. This manuscript provides instructions and a template for developing fact sheets based on the Global Burden of Disease study and national survey data. ©2015 Wiley Periodicals, Inc.

The acquisition of dangerous biological materials: Technical facts sheets to assist risk assessments of 46 potential BW agents

Energy Technology Data Exchange (ETDEWEB)

Aceto, Donato Gonzalo [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Astuto-Gribble, Lisa M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Gaudioso, Jennifer M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2007-11-01

Numerous terrorist organizations have openly expressed interest in producing and deploying biological weapons. However, a limiting factor for many terrorists has been the acquisition of dangerous biological agents, as evidenced by the very few successful instances of biological weapons use compared to the number of documented hoaxes. Biological agents vary greatly in their ability to cause loss of life and economic damage. Some agents, if released properly, can kill many people and cause an extensive number of secondary infections; other agents will sicken only a small number of people for a short period of time. Consequently, several biological agents can potentially be used to perpetrate a bioterrorism attack but few are likely capable of causing a high consequence event. It is crucial, from a US national security perspective, to more deeply understand the likelihood that terrorist organizations can acquire the range of these agents. Few studies have attempted to comprehensively compile the technical information directly relevant to the acquisition of dangerous bacteria, viruses and toxins. In this report, technical fact sheets were assembled for 46 potentially dangerous biological agents. Much of the information was taken from various research sources which could ultimately and significantly expedite and improve bioterrorism threat assessments. By systematically examining a number of specific agent characteristics included in these fact sheets, it may be possible to detect, target, and implement measures to thwart future terrorist acquisition attempts. In addition, the information in these fact sheets may be used as a tool to help laboratories gain a rudimentary understanding of how attractive a method laboratory theft is relative to other potential acquisition modes.

Fuels planning: science synthesis and integration; social issues fact sheet 13: Strategies for managing fuels and visual quality

Science.gov (United States)

Christine Esposito

2006-01-01

The public's acceptance of forest management practices, including fuels reduction, is heavily based on how forests look. Fuels managers can improve their chances of success by considering aesthetics when making management decisions. This fact sheet reviews a three-part general strategy for managing fuels and visual quality: planning, implementation, and monitoring...

7 CFR Exhibit D to Subpart B of... - Fact Sheet-The Federal Interagency Task Force on Food and Shelter for the Homeless

Science.gov (United States)

2010-01-01

... (CONTINUED) PROPERTY MANAGEMENT Management of Property Exhibit D to Subpart B of Part 1955—Fact Sheet—The... 7 Agriculture 14 2010-01-01 2009-01-01 true Fact Sheet-The Federal Interagency Task Force on Food and Shelter for the Homeless D Exhibit D to Subpart B of Part 1955 Agriculture Regulations of the...

Fuels planning: science synthesis and integration; environmental consequences fact sheet 13: Root Disease Analyzer-Armillaria Response Tool (ART)

Science.gov (United States)

Geral I. McDonald; Philip D. Tanimoto; Thomas M. Rice; David E. Hall; Jane E. Stewart; Paul J. Zambino; Jonalea R. Tonn; Ned B. Klopfenstein; Mee-Sook Kim

2005-01-01

The Root Disease Analyzer-Armillaria Response Tool (ART) is a Web-based tool that estimates Armillaria root disease risk in dry forests of the Western United States. This fact sheet identifies the intended users and uses, required inputs, what the model does and does not do, and tells the user how to obtain the model.

Fuels planning: science synthesis and integration; social issues fact sheet 04: Three critical topics to cover when talking about hazards

Science.gov (United States)

Rocky Mountain Research Station USDA Forest Service

2004-01-01

The amount of science applicable to the management of wildfire hazards is increasing daily. In addition, the attitudes of landowners and policymakers about fire and fuels management are changing. This fact sheet discusses three critical keys to communicating about wildfire hazards.

Fuels planning: science synthesis and integration; environmental consequences fact sheet 03: structure fires in the wildland-urban interface

Science.gov (United States)

Steve Sutherland

2004-01-01

National Fire Protection Association (NFPA) data indicate that wildfires destroyed approximately 9,000 homes between 1985 and 1994 in the United States. The loss of homes to wildfire has had a significant impact on Federal fire policy. This fact sheet discusses the causes of home ignitions in the wildland-urban interface, home ignition zones, how to reduce home...

Fuels planning: science synthesis and integration; social issues fact sheet 07: The "laws" of effective public education about fire hazards

Science.gov (United States)

Rocky Mountain Research Station USDA Forest Service

2004-01-01

Within the past 10 years, breakthrough research has identified factors that are most important for effectively communicating about wildland fire hazards. This fact sheet discusses seven "Laws" of effective public communication that should be considered in any state-of-the-art education campaign.

Sewage Sludge Incinerators: Final Standards of Performance for New Stationary Sources and Emission Guidelines for Existing Sources Final Rule Fact Sheets

Science.gov (United States)

This page contains a February 2011 fact sheet with information regarding the final NSPS and Emission Guidelines for Existing Sources for Sewage Sludge Incinerators (SSI). This document provides a summary of the information for these regulations.

Fuels planning: science synthesis and integration; forest structure and fire hazard fact sheet 03: visualizing forest structure and fuels

Science.gov (United States)

Rocky Mountain Research Station USDA Forest Service

2004-01-01

The software described in this fact sheet provides managers with tools for visualizing forest and fuels information. Computer-based landscape simulations can help visualize stand and landscape conditions and the effects of different management treatments and fuel changes over time. These visualizations can assist forest planning by considering a range of management...

Other Solid Waste Incineration (OSWI) Units Standards of Performance for New Stationary Sources and Emission Guidelines for Existing Sources Fact Sheets

Science.gov (United States)

This page contains a November 2005, and and November 2006 fact sheet with information regarding the final and proposed NSPS and Emission Guidelines for Existing Sources for OSWI. This document provides a summary of the information for this regulation

Fuels planning: science synthesis and integration; forest structure and fire hazard fact sheet 04: role of silviculture in fuel treatments

Science.gov (United States)

Rocky Mountain Research Station USDA Forest Service

2004-01-01

The principal goals of fuel treatments are to reduce fireline intensities, reduce the potential for crown fires, improve opportunities for successful fire suppression, and improve forest resilience to forest fires. This fact sheet discusses thinning, and surface fuel treatments, as well as challenges associated with those treatments.

New technology for sulfide reductions and increased oil recovery: Petroleum project fact sheet

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-12-14

This Fact Sheet is written for the Inventions and Innovations Program about a new technology for sulfide reduction and increased oil recovery. The new technology, called Bio-Competitive Exclusion (BCX), results in greater oil production and prevents the production of corrosive hydrogen sulfide in oil and gas reservoirs. This BCX process is initiated and maintained by a new product, called Max-Well 2000, in which nutrients are custom designed to stimulate targeted beneficial microorganisms that live in every oil and gas reservoir. Rapid growth of these microorganisms excludes activity of harmful sulfide-producing bacteria and produces by-products that serve as effective tertiary oil recovery agents and as sulfide degradation agents. Oil and gas production is both increased and sweetened.

Rising Above the Water: New Orleans Implements Energy Efficiency and Sustainability Practices Following Hurricanes Katrina and Rita (Fact Sheet)

Energy Technology Data Exchange (ETDEWEB)

2012-07-01

This fact sheet describes the technical assistance that the U.S. Department of Energy, through its National Renewable Energy Laboratory, provided to New Orleans, Louisiana, which helped the city incorporate energy efficiency into its rebuilding efforts for K-12 schools and homes following Hurricanes Katrina and Rita. NREL also provided support and analysis on energy policy efforts.

High Blood Pressure Facts

Science.gov (United States)

... Stroke Heart Disease Cholesterol Salt Million Hearts® WISEWOMAN High Blood Pressure Facts Recommend on Facebook Tweet Share Compartir On ... Top of Page CDC Fact Sheets Related to High Blood Pressure High Blood Pressure Pulmonary Hypertension Heart Disease Signs ...

Small Businesses Save Big: A Borrower's Guide To Increase the Bottom Line Using Energy Efficiency (Fact Sheet)

Energy Technology Data Exchange (ETDEWEB)

2015-01-01

Dollars saved through energy efficiency can directly impact your bottom line. Whether you are planning for a major renovation or upgrading individual pieces of building equipment, these improvements can help reduce operating costs, save on utility bills, and boost profits. This fact sheet provides a guide for small businesses to find the resources to increase the energy efficiency of their buildings.

Technologies for Distributed Energy Resources. Federal Energy Management Program (FEMP) Technical Assistance Fact Sheet

International Nuclear Information System (INIS)

Pitchford, P.; Brown, T.

2001-01-01

This four-page fact sheet describes distributed energy resources for Federal facilities, which are being supported by the U.S. Department of Energy's (DOE's) Federal Energy Management Program (FEMP). Distributed energy resources include both existing and emerging energy technologies: advanced industrial turbines and microturbines; combined heat and power (CHP) systems; fuel cells; geothermal systems; natural gas reciprocating engines; photovoltaics and other solar systems; wind turbines; small, modular biopower; energy storage systems; and hybrid systems. DOE FEMP is investigating ways to use these alternative energy systems in government facilities to meet greater demand, to increase the reliability of the power-generation system, and to reduce the greenhouse gases associated with burning fossil fuels

Fuels planning: science synthesis and integration; forest structure and fire hazard fact sheet 01: forest structure and fire hazard overview

Science.gov (United States)

Rocky Mountain Research Station USDA Forest Service

2004-01-01

Many managers and policymakers guided by the National Environmental Policy Act process want to understand the scientific principles on which they can base fuel treatments for reducing the size and severity of wildfires. These Forest Structure and Fire Hazard fact sheets discuss how to estimate fire hazard, how to visualize fuel treatments, and how the role of...

Facts for Families from the American Academy of Child and Adolescent Psychiatry [1991].

Science.gov (United States)

American Academy of Child and Adolescent Psychiatry, Washington, DC.

Nine fact sheets relevant to children's emotional well-being are presented in this document. The first fact sheet, "Teenagers with Eating Disorders" focuses on anorexia nervosa and bulimia. The second fact sheet, "Children and Grief" describes age-related responses to death, and ways of coping with a death in a family that…

Facts for Families from the American Academy of Child and Adolescent Psychiatry [1989].

Science.gov (United States)

American Academy of Child and Adolescent Psychiatry, Washington, DC.

Six fact sheets on issues relevant to children's emotional well being are presented in this document. The first fact sheet, "Children and Divorce" provides information for parents to consider when getting a divorce. Parents are encouraged to be aware of the stress that the events surrounding a divorce cause for the child. The second fact sheet,…

Small Businesses Save Big: A Guide to Help SBA Lenders Understand and Communicate the Value of Energy Efficiency Investments (Fact Sheet)

Energy Technology Data Exchange (ETDEWEB)

2015-01-01

Dollars saved through energy efficiency can directly impact your bottom line. Whether you are planning for a major renovation or upgrading individual pieces of building equipment, these improvements can help reduce operating costs, save on utility bills, and boost profits. This fact sheet provides guidelines for SBA lenders to understand the value of financing energy efficiency investments.

Fuels planning: science synthesis and integration; environmental consequences fact sheet 12: Water Erosion Prediction Project (WEPP) Fuel Management (FuMe) tool

Science.gov (United States)

William Elliot; David Hall

2005-01-01

The Water Erosion Prediction Project (WEPP) Fuel Management (FuMe) tool was developed to estimate sediment generated by fuel management activities. WEPP FuMe estimates sediment generated for 12 fuel-related conditions from a single input. This fact sheet identifies the intended users and uses, required inputs, what the model does, and tells the user how to obtain the...

Case Management for Individuals with Mental Retardation. ARC Facts.

Science.gov (United States)

Association for Retarded Citizens, Arlington, TX.

A question-and-answer format is used in this fact sheet to provide information on case management for individuals with mental retardation. The fact sheet describes the major components of a case management system, the role of the case manager, the individual's or family's role in case management, providers of case management services and systems…

Clinical Social Work. State Laws Governing Independent Practice and Reimbursement of Services. Fact Sheet for the Honorable Daniel K. Inouye, United States Senate.

Science.gov (United States)

General Accounting Office, Washington, DC. Div. of Human Resources.

This fact sheet on state laws governing the independent practice and reimbursement of services for clinical social workers contains information from questionnaires sent to the state agencies responsible for health insurance regulations and Medicaid and licensing activities. Information on Ohio, the only state which did not respond, is not…

Photovoltaics (PV) as an Eligible Measure in Residential PACE Programs: Benefits and Challenges (Fact Sheet)

Energy Technology Data Exchange (ETDEWEB)

Coughlin, J.

2010-06-01

Property Assessed Clean Energy (PACE) financing is one of several new financial models broadening access to clean energy by addressing the barrier of initial capital cost. The majority of the PACE programs in the market today include PV as an eligible measure. PV appeals to homeowners as a way to reduce utility bills, self-generate sustainable power, increase energy independence and demonstrate a commitment to the environment. If substantial state incentives for PV exist, PV projects can be economic under PACE, especially when partnered with good net metering policies. At the same time, PV is expensive relative to other eligible measures with a return on investment horizon that might exceed program targets. This fact sheet reviews the benefits and potential challenges of including PV in PACE programs.

Physical Therapy and Occupational Therapy: Suggested Readings [and] Physical Therapy: Supply/Demand--Some Facts [and] Occupational Therapy: Supply and Demand--Some Facts. Information on Personnel Supply and Demand.

Science.gov (United States)

National Clearinghouse for Professions in Special Education, Reston, VA.

Brought together are two fact sheets on the supply of and demand for physical therapists and occupational therapists. The fact sheets cite statistical data from the National Easter Seal Society, the American Physical Therapy Association, and the American Occupational Therapy Association. The cited facts focus on the need to recruit and retain…

Fuels planning: science synthesis and integration; social issues fact sheet 02: Developing personal responsibility for fuels reduction: Types of information to encourage proactive behavior

Science.gov (United States)

Rocky Mountain Research Station USDA Forest Service

2004-01-01

Fuels management responsibilities may include providing local property owners with the information for taking responsibility for reducing fuels on their land. This fact sheet discusses three different types of information that may be useful in programs to engage property owners in fuel reduction activities.

Fuels planning: science synthesis and integration; environmental consequences fact sheet 09: Fire and Fuels Extension to the Forest Vegetation Simulator (FFE-FVS)

Science.gov (United States)

Elizabeth Reinhardt

2005-01-01

FFE-FVS is a model linking stand development, fuel dynamics, fire behavior and fire effects. It allows comparison of mid- to long-term effects of management alternatives including harvest, mechanical fuel treatment, prescribed fire, salvage, and no action. This fact sheet identifies the intended users and uses, required inputs, what the model does, and tells the user...

NREL Showcases Hydrogen Internal Combustion Engine Bus, Helps DOE Set Standards for Outreach (Fact Sheet)

Energy Technology Data Exchange (ETDEWEB)

2010-11-01

This fact sheet describes the National Renewable Energy Laboratory's (NREL's) accomplishments in showcasing a Ford hydrogen-powered internal combustion engine (H2ICE) bus at The Taste of Colorado festival in Denver. NREL started using its U.S. Department of Energy-funded H2ICE bus in May 2010 as the primary shuttle vehicle for VIP visitors, members of the media, and new employees. In September 2010, NREL featured the bus at The Taste of Colorado. This was the first major outreach event for the bus. NREL's educational brochure, vehicle wrap designs, and outreach efforts serve as a model for other organizations with DOE-funded H2ICE buses. Work was performed by the Hydrogen Education Group and Market Transformation Group in the Hydrogen Technologies and Systems Center.

Fuels planning: science synthesis and integration; social issues fact sheet 01: Developing personal responsibility for fuels reduction: Building a successful program to engage property owners

Science.gov (United States)

Rocky Mountain Research Station USDA Forest Service

2004-01-01

In the course of work as a land manager, you will no doubt be involved in developing programs to achieve various objectives, including the improvement of fuels management on private lands. This fact sheet describes six steps that will help you plan and conduct a successful program.

Sandia National Laboratories: News: Publications: Fact Sheets

Science.gov (United States)

Environmental Management System Pollution Prevention History 60 impacts Diversity Locations Facts & Figures Does Sandia Buy? Opportunities Small Business Procurement Technical Assistance Program (PTAP) Current Technology Partnerships Business, Industry, & Non-Profits Government Universities Center for

Back Pain Facts and Statistics

Science.gov (United States)

... Marketing Patient Fact Sheets Contact the ACA State Licensing Boards Research JMPT Abstracts Latest Issue Evidence in ... Chiropractic Posture Backpack Safety Spinal Health Winter Activities Kids and Sports Exercising Outdoors with Baby Gardening Chronic ...

Facts about food irradiation: Controlling the process

International Nuclear Information System (INIS)

1991-01-01

This fact sheet briefly reviews the procedures that exist to control the process of food irradiation. It also summarizes the difficulties in identifying irradiated food, which stem from the fact that irradiation does not physically change the food or cause significant chemical changes in foods. 4 refs

Alfabetizacion de las personas que son sordas e invidentes. Hoja informativa de DB-LINK (Literacy for Persons Who Are Deaf-Blind. DB-LINK Fact Sheet).

Science.gov (United States)

Miles, Barbara

This fact sheet discusses the importance of literacy for individuals who are deaf-blind, the social functions of reading and writing, and conditions necessary for the development of literacy. Strategies for promoting literacy among this population are described and include: (1) invite children and adults who are deaf-blind to observe as you use…

CERN Quick Facts 2017 (French version)

CERN Multimedia

Mobs, Esma

2017-01-01

Facts about CERN, the contributions of its Member States, its machines and experiments, the number of its employees and users, management structure, etc. Previously called "CERN General Information Sheet"

CERN Quick Facts 2016 (French version)

CERN Multimedia

AUTHOR|(CDS)2070305

2016-01-01

Facts about CERN, the contributions of its Member States, its machines and experiments, the number of its employees and users, management structure, etc. Previously called "CERN General Information Sheet"

CERN Quick Facts 2016 (English version)

CERN Multimedia

AUTHOR|(CDS)2070305

2016-01-01

Facts about CERN, the contributions of its Member States, its machines and experiments, the number of its employees and users, management structure, etc. Previously called "CERN General Information Sheet"

CERN Quick Facts 2017 (English version)

CERN Multimedia

Mobs, Esma

2017-01-01

Facts about CERN, the contributions of its Member States, its machines and experiments, the number of its employees and users, management structure, etc. Previously called "CERN General Information Sheet"

Emotional Disturbance. NICHCY Disability Fact Sheet #5

Science.gov (United States)

National Dissemination Center for Children with Disabilities, 2010

2010-01-01

The mental health of our children is a natural and important concern for us all. The fact is, many mental disorders have their beginnings in childhood or adolescence, yet may go undiagnosed and untreated for years. "Umbrella" terms such as emotional disturbance, behavioral disorders, or mental illness are used to refer to mental…

Facts about Volunteers. NCJW Center for the Child Fact Sheet Number 5.

Science.gov (United States)

National Council of Jewish Women, New York, NY. Center for the Child.

Volunteering is a vital and widespread activity in the United States; in fact, volunteers perform many essential community functions. Those who believe that most volunteers are women with time on their hands, that volunteers just do "charity work," and that volunteers are a source of cheap labor who can replace paid professionals and…

More Cancer Types - SEER Cancer Stat Facts

Science.gov (United States)

Cancer Statistical Fact Sheets are summaries of common cancer types developed to provide an overview of frequently-requested cancer statistics including incidence, mortality, survival, stage, prevalence, and lifetime risk.

Legislation and regulations for prevention of legionella in drinking and hot water. Explanation of care obligation, alternate techniques and risk assessment. Fact sheet; Wet- en regelgeving Legionellapreventie in drink- en warmtapwater. Uitleg over zorgplicht, alternatieve technieken en risico-analyse. Informatieblad

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-03-15

The reason for this fact sheet is the revision of the drinking water regulations, including the regulations for the prevention of legionella, July 1, 2011. Many market parties consider the regulations as complex, even after the revision. This fact sheet provides more clarity [Dutch] Aanleiding voor dit informatieblad is de op 1 juli 2011 herziene drinkwaterregelgeving, inclusief de voor legionellapreventie relevante bepalingen. Veel marktpartijen ervaren deze regelgeving, ook na herziening, als complex. Dit informatieblad verschaft meer duidelijkheid.

Gun Sales. Firearm Facts.

Science.gov (United States)

Duker, Laurie, Ed.

Minimal federal regulations on firearm sales have facilitated the proliferation of guns, gun owners, and gun dealers in the United States. This fact sheet offers data on the growing number of firearm dealers, the relative ease of obtaining and keeping a license to sell guns from the Federal Bureau of Alcohol, Tobacco, and Firearms, the lack of…

Fact sheets relating to use of geothermal energy in the United States

Energy Technology Data Exchange (ETDEWEB)

None

1980-12-01

A compilation of data relating to geothermal energy in each of the 50 states is presented. The data are summarized on one page for each state. All summary data sheets use a common format. Following the summary data sheet there are additional data on the geology of each state pertaining to possible hydrothermal/geothermal resources. Also there is a list of some of the reports available pertaining to the state and state energy contacts. The intent of these documents is to present in a concise form reference data for planning by the Department of Energy.

Brain Drain: A Child's Brain on Poverty. Poverty Fact Sheet

Science.gov (United States)

Damron, Neil

2015-01-01

"Brain Drain: A Child's Brain on Poverty," released in March 2015 and prepared by intern Neil Damron, explores the brain's basic anatomy and recent research findings suggesting that poverty affects the brain development of infants and young children and the potential lifelong effects of the changes. The sheet draws from a variety of…

Formation of Sheeting Joints as a Result of Compression Parallel to Convex Surfaces, With Examples from Yosemite National Park, California

Science.gov (United States)

Martel, S. J.

2008-12-01

The formation of sheeting joints has been an outstanding problem in geology. New observations and analyses indicate that sheeting joints develop in response to a near-surface tension induced by compressive stresses parallel to a convex slope (hypothesis 1) rather than by removal of overburden by erosion, as conventionally assumed (hypothesis 2). Opening mode displacements across the joints together with the absence of mineral precipitates within the joints mean that sheeting joints open in response to a near-surface tension normal to the surface rather than a pressurized fluid. Consideration of a plot of this tensile stress as a function of depth normal to the surface reveals that a true tension must arise in the shallow subsurface if the rate of that tensile stress change with depth is positive at the surface. Static equilibrium requires this rate (derivative) to equal P22 k2 + P33 k3 - ρ g cosβ, where k2 and k3 are the principal curvatures of the surface, P22 and P33 are the respective surface- parallel normal stresses along the principal curvatures, ρ is the material density, g is gravitational acceleration, and β is the slope. This derivative will be positive and sheeting joints can open if at least one principal curvature is sufficiently convex (negative) and the surface-parallel stresses are sufficiently compressive (negative). At several sites with sheeting joints (e.g., Yosemite National Park in California), the measured topographic curvatures and the measured surface-parallel stresses of about -10 MPa combine to meet this condition. In apparent violation of hypothesis 1, sheeting joints occur locally at the bottom of Tenaya Canyon, one of the deepest glaciated, U-shaped (concave) canyons in the park. The canyon-bottom sheeting joints only occur, however, where the canyon is convex downstream, a direction that nearly coincides with direction of the most compressive stress measured in the vicinity. The most compressive stress acting along the convex

African Americans: College Majors and Earnings. Fact Sheet

Science.gov (United States)

Carnevale, Anthony P.; Fasules, Megan L.; Porter, Andrea; Landis-Santos Jennifer

2016-01-01

Access to college for African Americans has increased, but African Americans are highly concentrated in lower-paying majors. The college major, which has critical economic consequences throughout life, reflects personal choices but also reflects the fact that African-American students are concentrated in open-access four-year institutions that…

TechEdSat Nano-Satellite Series Fact Sheet

Science.gov (United States)

Murbach, Marcus; Martinez, Andres; Guarneros Luna, Ali

2014-01-01

TechEdSat-3p is the second generation in the TechEdSat-X series. The TechEdSat Series uses the CubeSat standards established by the California Polytechnic State University Cal Poly), San Luis Obispo. With typical blocks being constructed from 1-unit (1U 10x10x10 cm) increments, the TechEdSat-3p has a 3U volume with a 30 cm length. The project uniquely pairs advanced university students with NASA researchers in a rapid design-to-flight experience lasting 1-2 semesters.The TechEdSat Nano-Satellite Series provides a rapid platform for testing technologies for future NASA Earth and planetary missions, as well as providing students with an early exposure to flight hardware development and management.

Herpes Can Happen to Anyone: Share Facts, Not Fears

Science.gov (United States)

... promiscuous. Links Oral Herpes Sexually Transmitted Diseases Genital Herpes (CDC) Genital Herpes Fact Sheet (CDC) What You Need to Know About Genital Herpes Video (CDC) References Vaccination to Reduce Reactivation of ...

Communicacion Expresiva: Como los ninos nos envian mensajes [and] Comunicacion Receptiva: Como los ninos entienden nuestros mensajes [and] Interacciones de Comunicacion: Hacen falta dos. Hojas informativa de DB-LINK (Communication Interactions: It Takes Two [and] Receptive Communication: How Children Understand Your Messages to Them [and] Expressive Communication: How Children Send Their Messages to You. DB-LINK Fact Sheets).

Science.gov (United States)

Stremel, Kathleen

This document consists of three separately published fact sheets combined here because of the close relationship of their subject matter. The first fact sheet, "Communication Interactions: It Takes Two" (Kathleen Stremel), defines communication; suggests ways to find opportunities for interactive communication; offers specific suggestions for…

Enhancing Tribal Energy Security and Clean Energy (Fact Sheet)

Energy Technology Data Exchange (ETDEWEB)

2013-07-01

This fact provides information on the Strategic Technical Assistance Response Team (START) Program, a U.S. Department of Energy Office of Indian Energy Policy and Programs (DOE-IE) initiative to provide technical expertise to support the development of next-generation energy projects in Indian Country.

Facts about food irradiation: Nutritional quality of irradiated foods

International Nuclear Information System (INIS)

1991-01-01

This fact sheet briefly considers the nutritional value of irradiated foods. Micronutrients, especially vitamins, are sensitive to any food processing method, but irradiation does not cause any special nutritional problems in food. 4 refs

Fuels planning: science synthesis and integration; forest structure and fire hazard fact sheet 06: Guide to fuel treatments in dry forests of the Western United States: assessing forest structure and fire hazard

Science.gov (United States)

Rocky Mountain Research Station USDA Forest Service

2005-01-01

The Guide to Fuel Treatments analyzes a range of potential silvicultural thinnings and surface fuel treatments for 25 representative dry-forest stands in the Western United States. The guide provides quantitative guidelines and visualization for treatment based on scientific principles identified for reducing potential crown fires. This fact sheet identifies the...

Facts about food irradiation: Chemical changes in irradiated foods

International Nuclear Information System (INIS)

1991-01-01

This fact sheet addresses the safety of irradiated food. The irradiation process produces very little chemical change in food, and laboratory experiments have shown no harmful effects in animals fed with irradiated milk powder. 3 refs

Sheet pinch devices

International Nuclear Information System (INIS)

Anderson, O.A.; Baker, W.R.; Ise, J. Jr.; Kunkel, W.B.; Pyle, R.V.; Stone, J.M.

1958-01-01

Three types of sheet-like discharges are being studied at Berkeley. The first of these, which has been given the name 'Triax', consists of a cylindrical plasma sleeve contained between two coaxial conducting cylinders A theoretical analysis of the stability of the cylindrical sheet plasma predicts the existence of a 'sausage-mode' instability which is, however, expected to grow more slowly than in the case of the unstabilized linear pinch (by the ratio of the radial dimensions). The second pinch device employs a disk shaped discharge with radial current guided between flat metal plates, this configuration being identical to that of the flat hydromagnetic capacitor without external magnetic field. A significant feature of these configurations is the absence of a plasma edge, i.e., there are no regions of sharply curved magnetic field lines anywhere in these discharges. The importance of this fact for stability is not yet fully investigated theoretically. As a third configuration a rectangular, flat pinch tube has been constructed, and the behaviour of a flat plasma sheet with edges is being studied experimentally

Facts about food irradiation: Packaging of irradiated foods

International Nuclear Information System (INIS)

1991-01-01

This fact sheet considers the effects on packaging materials of food irradiation. Extensive research has shown that almost all commonly used food packaging materials toted are suitable for use. Furthermore, many packaging materials are themselves routinely sterilized by irradiation before being used. 2 refs

Complex world-sheets from N=2 strings

International Nuclear Information System (INIS)

Barbon, J.L.F.

1996-01-01

We study some properties of target space strings constructed from (2,1) heterotic strings. We argue that world-sheet complexification is a general property of the bosonic sector of such target world-sheets. We give a target space interpretation of this fact and relate it to the non-gaussian nature of free string field theory. We provide several one-loop calculations supporting the stringy construction of critical world-sheets in terms of (2,1) models. Using finite-temperature boundary conditions in the underlying (2,1) string we obtain non-chiral target space spin structures, and point out some of the problems arising for chiral spin structures, such as the heterotic world-sheet. To this end, we study the torus partition function of the corresponding asymmetric orbifold of the (2,1) string. (orig.)

Facts about food irradiation: Status and trends

International Nuclear Information System (INIS)

1991-01-01

This fact sheet introduces the concept of irradiating food to reduce post-harvest losses from infestation, contamination and spoilage, to lower the incidence of foodborne diseases and to assist international trade in food products by offering an alternative to fumigation or some other treatments that may not be acceptable to the importing countries

Tobacco Control in California 2003-2007: Missed Opportunities

OpenAIRE

Hong, MPH, Mi-Kyung; Barnes,, Richard L JD; Glantz,, Stanton PhD

2007-01-01

While smoking prevalence in California continued its decline (reaching an historic low of 13.3% in 2006), this rate was slower than in earlier years, reflecting the fact that tobacco control efforts in California in the period 2003-2007 continued to drift, with no clear indications that California would regain its international leadership in tobacco control. Neither the Schwarzenegger Administration nor the California Legislature sought to divert the Proposition 99 funding allocation...

Global ice sheet/RSL simulations using the higher-order Ice Sheet System Model.

Science.gov (United States)

Larour, E. Y.; Ivins, E. R.; Adhikari, S.; Schlegel, N.; Seroussi, H. L.; Morlighem, M.

2017-12-01

Relative sea-level rise is driven by processes that are intimately linked to the evolution ofglacial areas and ice sheets in particular. So far, most Earth System models capable of projecting theevolution of RSL on decadal to centennial time scales have relied on offline interactions between RSL andice sheets. In particular, grounding line and calving front dynamics have not been modeled in a way that istightly coupled with Elasto-Static Adjustment (ESA) and/or Glacial-Isostatic Adjustment (GIA). Here, we presenta new simulation of the entire Earth System in which both Greenland and Antarctica ice sheets are tightly coupledto an RSL model that includes both ESA and GIA at resolutions and time scales compatible with processes suchas grounding line dynamics for Antarctica ice shelves and calving front dynamics for Greenland marine-terminatingglaciers. The simulations rely on the Ice Sheet System Model (ISSM) and show the impact of higher-orderice flow dynamics and coupling feedbacks between ice flow and RSL. We quantify the exact impact of ESA andGIA inclusion on grounding line evolution for large ice shelves such as the Ronne and Ross ice shelves, as well asthe Agasea Embayment ice streams, and demonstate how offline vs online RSL simulations diverge in the long run,and the consequences for predictions of sea-level rise.This work was performed at the California Institute of Technology's Jet Propulsion Laboratory undera contract with the National Aeronautics and Space Administration's Cryosphere Science Program.

Facts about food irradiation: Irradiation and food additives and residues

International Nuclear Information System (INIS)

1991-01-01

This fact sheet considers the issue of the irradiation of food containing food additives or pesticide residues. The conclusion is that there is no health hazard posed by radiolytic products of pesticides or food additives. 1 ref

Facts about food irradiation: Food irradiation costs

International Nuclear Information System (INIS)

1991-01-01

This fact sheet gives the cost of a typical food irradiation facility (US $1 million to US $3 million) and of the food irradiation process (US $10-15 per tonne for low-dose applications; US $100-250 per tonne for high-dose applications). These treatments also bring consumer benefits in terms of availability, storage life and improved hygiene. 2 refs

Asthma and Environment Fact Sheet for Parents and Schools. Revised

Science.gov (United States)

Healthy Schools Network, Inc., 2012

2012-01-01

Important facts about asthma and the environment include: (1) Asthma has reached epidemic proportions in the United States, affecting about 25 million people of all ages and races, including about 7 million children; (2) Nearly one in 10 school-aged children has asthma, and the percentage of children with asthma is rising more rapidly in…

Facts about food irradiation: Irradiated foods and the consumer

International Nuclear Information System (INIS)

1991-01-01

This fact sheet discusses market testing of irradiate food, consumer response to irradiated products has always been positive, and in some countries commercial quantities of some irradiated food items have been sold on a regular basis. Consumers have shown no reluctance to buy irradiated food products. 4 refs

Optimal Materials and Deposition Technique Lead to Cost-Effective Solar Cell with Best-Ever Conversion Efficiency (Fact Sheet)

Energy Technology Data Exchange (ETDEWEB)

2012-07-01

This fact sheet describes how the SJ3 solar cell was invented, explains how the technology works, and why it won an R&D 100 Award. Based on NREL and Solar Junction technology, the commercial SJ3 concentrator solar cell - with 43.5% conversion efficiency at 418 suns - uses a lattice-matched multijunction architecture that has near-term potential for cells with {approx}50% efficiency. Multijunction solar cells have higher conversion efficiencies than any other type of solar cell. But developers of utility-scale and space applications crave even better efficiencies at lower costs to be both cost-effective and able to meet the demand for power. The SJ3 multijunction cell, developed by Solar Junction with assistance from foundational technological advances by the National Renewable Energy Laboratory, has the highest efficiency to date - almost 2% absolute more than the current industry standard multijunction cell-yet at a comparable cost. So what did it take to create this cell having 43.5% efficiency at 418-sun concentration? A combination of materials with carefully designed properties, a manufacturing technique allowing precise control, and an optimized device design.

Facts about food irradiation: Irradiation and food safety

International Nuclear Information System (INIS)

1991-01-01

This fact sheet focusses on the question of whether irradiation can be used to make spoiled food good. No food processing procedures can substitute for good hygienic practices, and good manufacturing practices must be followed in the preparation of food whether or not the food is intended for further processing by irradiation or any other means. 3 refs

The California Seafloor Mapping Program — Providing science and geospatial data for California's State Waters

Science.gov (United States)

Johnson, S. Y.; Cochrane, G. R.; Golden, N. E.; Dartnell, P.; Hartwell, S. R.; Cochran, S. A.; Watt, J. T.

2017-12-01

The California Seafloor Mapping Program (CSMP) is a collaborative effort to develop comprehensive bathymetric, geologic, and habitat maps and data for California's State Waters, which extend for 1,350 km from the shoreline to 5.6 km offshore. CSMP began in 2007 when the California Ocean Protection Council and NOAA allocated funding for high-resolution bathymetric mapping to support the California Marine Life Protection Act and update nautical charts. Collaboration and support from the USGS and other partners has led to development and dissemination of one of the world's largest seafloor-mapping datasets. CSMP data collection includes: (1) High-resolution bathymetric and backscatter mapping using swath sonar sensors; (2) "Ground-truth" imaging from a sled mounted with video and still cameras; (3) High-resolution seismic-reflection profiling at 1 km line spacing. Processed data are all publicly available. Additionally, 25 USGS map and datasets covering one third of California's coast have been published. Each publication contains 9 to 12 pdf map sheets (1:24,000 scale), an explanatory pamphlet, and a catalog of digital geospatial data layers (about 15 to 25 per map area) with web services. Map sheets display bathymetry, backscatter, perspective views, habitats, groundtruth imagery, seismic profiles, sediment distribution and thickness, and onshore-offshore geology. The CSMP goal is to serve a large constituency, ranging from senior GIS analysts in large agencies, to local governments with limited resources, to non-governmental organizations, the private sector, and concerned citizens. CSMP data and publications provide essential science and data for ocean and coastal management, stimulate and enable research, and raise public education and awareness of coastal and ocean issues. Specific applications include: Delineation and designation of marine protected areas Characterization and modeling of benthic habitats and ecosystems Updating nautical charts Earthquake hazard

Fact Sheets

Science.gov (United States)

... PCE) PDF | Espanol PDF Pesticides PDF | Espanol PDF Pregnancy and Natural Disasters PDF | Espanol PDF Reproductive Hazards of the Workplace PDF | Espanol PDF Research Study Participation PDF | Espanol ...

Bi-directional electrons in the near-Earth plasma sheet

Directory of Open Access Journals (Sweden)

K. Shiokawa

2003-07-01

Full Text Available We have studied the occurrence characteristics of bi-directional electron pitch angle anisotropy (enhanced flux in field-aligned directions, F^ /F|| > 1.5 at energies of 0.1–30 keV using plasma and magnetic field data from the AMPTE/IRM satellite in the near-Earth plasma sheet. The occurrence rate increases in the tailward direction from XGSM = - 9 RE to - 19 RE . The occurrence rate is also enhanced in the midnight sector, and furthermore, whenever the elevation angle of the magnetic field is large while the magnetic field intensity is small, B ~ 15 nT. From these facts, we conclude that the bi-directional electrons in the central plasma sheet are produced mainly in the vicinity of the neutral sheet and that the contribution from ionospheric electrons is minor. A high occurrence is also found after earthward high-speed ion flows, suggesting Fermi-type field-aligned electron acceleration in the neutral sheet. Occurrence characteristics of bi-directional electrons in the plasma sheet boundary layer are also discussed.Key words. Magnetospheric physics (magnetospheric configuration and dynamics; magnetotail; plasma sheet

Numerical and experimental analysis of resistance projection welding of square nuts to sheets

DEFF Research Database (Denmark)

Nielsen, Chris Valentin; Zhang, Wenqi; Martins, Paulo A.F.

2014-01-01

Projection welding of nuts to sheets is a widely utilized manufacturing process in the automotive industry. The process entails challenges due the necessity of joining different sheet thicknesses and nut sizes made from dissimilar materials, and due to the fact of experiencing large local deforma...... of the square nut to the sheet under different operating conditions. © 2014 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license...

Funding Water Reuse and Conservation Projects with the Clean Water State Revolving Fund

Science.gov (United States)

This fact sheet demonstrates how the CWSRF provides assistance to eligible recipients for projects promoting water reuse and conservation. It highlights successful projects for these communities in California, Virginia and Texas.

Facts about food irradiation: Safety of irradiation facilities

International Nuclear Information System (INIS)

1991-01-01

This fact sheet considers the safety of industrial irradiation facilities. Although there have been accidents, none of them has endangered public health or environmental safety, and the radiation processing industry is considered to have a very good safety record. Gamma irradiators do not produce radioactive waste, and the radiation sources at the facilities cannot explode nor in any other way release radioactivity into the environment. 3 refs

Ice sheet hydrology - a review

International Nuclear Information System (INIS)

Jansson, Peter; Naeslund, Jens-Ove; Rodhe, Lars

2007-03-01

This report summarizes the theoretical knowledge on water flow in and beneath glaciers and ice sheets and how these theories are applied in models to simulate the hydrology of ice sheets. The purpose is to present the state of knowledge and, perhaps more importantly, identify the gaps in our understanding of ice sheet hydrology. Many general concepts in hydrology and hydraulics are applicable to water flow in glaciers. However, the unique situation of having the liquid phase flowing in conduits of the solid phase of the same material, water, is not a commonly occurring phenomena. This situation means that the heat exchange between the phases and the resulting phase changes also have to be accounted for in the analysis. The fact that the solidus in the pressure-temperature dependent phase diagram of water has a negative slope provides further complications. Ice can thus melt or freeze from both temperature and pressure variations or variations in both. In order to provide details of the current understanding of water flow in conjunction with deforming ice and to provide understanding for the development of ideas and models, emphasis has been put on the mathematical treatments, which are reproduced in detail. Qualitative results corroborating theory or, perhaps more often, questioning the simplifications made in theory, are also given. The overarching problem with our knowledge of glacier hydrology is the gap between the local theories of processes and the general flow of water in glaciers and ice sheets. Water is often channelized in non-stationary conduits through the ice, features which due to their minute size relative to the size of glaciers and ice sheets are difficult to incorporate in spatially larger models. Since the dynamic response of ice sheets to global warming is becoming a key issue in, e.g. sea-level change studies, the problems of the coupling between the hydrology of an ice sheet and its dynamics is steadily gaining interest. New work is emerging

Ice sheet hydrology - a review

Energy Technology Data Exchange (ETDEWEB)

Jansson, Peter; Naeslund, Jens-Ove [Dept. of Physical Geography and Quaternary Geology, Stockholm Univ., Stockholm (Sweden); Rodhe, Lars [Geological Survey of Sweden, Uppsala (Sweden)

2007-03-15

This report summarizes the theoretical knowledge on water flow in and beneath glaciers and ice sheets and how these theories are applied in models to simulate the hydrology of ice sheets. The purpose is to present the state of knowledge and, perhaps more importantly, identify the gaps in our understanding of ice sheet hydrology. Many general concepts in hydrology and hydraulics are applicable to water flow in glaciers. However, the unique situation of having the liquid phase flowing in conduits of the solid phase of the same material, water, is not a commonly occurring phenomena. This situation means that the heat exchange between the phases and the resulting phase changes also have to be accounted for in the analysis. The fact that the solidus in the pressure-temperature dependent phase diagram of water has a negative slope provides further complications. Ice can thus melt or freeze from both temperature and pressure variations or variations in both. In order to provide details of the current understanding of water flow in conjunction with deforming ice and to provide understanding for the development of ideas and models, emphasis has been put on the mathematical treatments, which are reproduced in detail. Qualitative results corroborating theory or, perhaps more often, questioning the simplifications made in theory, are also given. The overarching problem with our knowledge of glacier hydrology is the gap between the local theories of processes and the general flow of water in glaciers and ice sheets. Water is often channelized in non-stationary conduits through the ice, features which due to their minute size relative to the size of glaciers and ice sheets are difficult to incorporate in spatially larger models. Since the dynamic response of ice sheets to global warming is becoming a key issue in, e.g. sea-level change studies, the problems of the coupling between the hydrology of an ice sheet and its dynamics is steadily gaining interest. New work is emerging

Facts about food irradiation: Genetic studies

International Nuclear Information System (INIS)

1991-01-01

Results published in the mid-1970s from the National Institute of Nutrition (NIN) in India showed increased numbers of polyploid cells in rats, mice, monkeys and malnourished children fed irradiated wheat products. This fact sheet considers the validity of these results. A large number of independent studies have been subsequently performed, and in none of these have results been obtained that support the NIN findings. The conclusion is that there is no evidence to link the consumption of irradiated food with any mutagenic effect. 3 refs

California's experience with alternative fuel vehicles

International Nuclear Information System (INIS)

Sullivan, C.

1993-01-01

California is often referred to as a nation-state, and in many aspects fits that description. The state represents the seventh largest economy in the world. Most of California does not have to worry about fuel to heat homes in the winter. What we do worry about is fuel for our motor vehicles, approximately 24 million of them. In fact, California accounts for ten percent of new vehicle sales in the United States each year, much of it used in the transportation sector. The state is the third largest consumer of gasoline in the world, only exceeded by the United States as a whole and the former Soviet Union. California is also a leader in air pollution. Of the nine worst ozone areas in the country cited in the 1990 Clean Air Act Amendments, two areas the Los Angeles Basin and San Diego are located in California. Five of California's cities made the top 20 smoggiest cities in the United States. In reality, all of California's major metropolitan areas have air quality problems. This paper will discuss the beginnings of California's investigations of alternative fuels use in vehicles; the results of the state's demonstration programs; and future plans to improve California's air quality and energy security in the mobile sector

Facts about food irradiation: Microbiological safety of irradiated food

International Nuclear Information System (INIS)

1991-01-01

This fact sheet considers the microbiological safety of irradiated food, with especial reference to Clostridium botulinum. Irradiated food, as food treated by any ''sub-sterilizing'' process, must be handled, packaged and stored following good manufacturing practices to prevent growth and toxin production of C. botulinum. Food irradiation does not lead to increased microbiological hazards, nor can it be used to save already spoiled foods. 4 refs

On the structure of finite-sheeted coverings of compact connected groups

OpenAIRE

Grigorian, S. A.; Gumerov, R. N.

2004-01-01

Finite-sheeted covering mappings onto compact connected groups are studied. It is shown that a finite-sheeted covering mapping from a connected Hausdorff topological space onto a compact connected abelian group G must be a homeomorphism provided that the character group of G admits division by the degree of given covering mapping. Using this result, we obtain criteria of triviality for finite coverings of G in terms of its character group and means on G. In order to establish these facts, for...

Facts on Nirex

International Nuclear Information System (INIS)

1987-01-01

This folder contains twelve two-page leaflets (fact sheets) which answer questions posed about UK NIREX Ltd, its operations and radioactive waste. NIREX (the Nuclear Industry Radioactive Waste Executive) is the organisation responsible for implementing the British Government's policy for the disposal of most low- and intermediate-level radioactive waste produced in the United Kingdom. The questions posed are; what is NIREX. What is radioactivity. What is radioactive waste. Radioactive waste, what are the options. What is a radioactive waste repository. Some aspects of such a repository are then explained - how engineered barriers work, how geological barriers work, how long can concrete last, how is the radioactive waste transported, how are repository sites identified. The last two leaflets consider why do we need research, and look at radioactive waste management worldwide. The answers are in non-technical language and are short. (UK)

California State Waters Map Series-Offshore of Point Reyes, California

Science.gov (United States)

Watt, Janet T.; Dartnell, Peter; Golden, Nadine E.; Greene, H. Gary; Erdey, Mercedes D.; Cochrane, Guy R.; Johnson, Samuel Y.; Hartwell, Stephen R.; Kvitek, Rikk G.; Manson, Michael W.; Endris, Charles A.; Dieter, Bryan E.; Sliter, Ray W.; Krigsman, Lisa M.; Lowe, Erik; Chinn, John L.; Watt, Janet T.; Cochran, Susan A.

2015-01-01

Reyes bar, and Bolinas shelf domains. Sheet 10 is a geologic map that merges onshore geologic mapping (compiled from existing maps by the California Geological Survey) and new offshore geologic mapping that is based on integration of high-resolution bathymetry and backscatter imagery (sheets 1, 2, 3), seafloor-sediment and rock samples (Reid and others, 2006), digital camera and video imagery (sheet 6), and high-resolution seismic-reflection profiles (sheet 8), as well as aerial-photographic interpretation of nearshore areas. The information provided by the map sheets, pamphlet, and data catalog have a broad range of applications. High-resolution bathymetry, acoustic backscatter, ground-truth-surveying imagery, and habitat mapping all contribute to habitat characterization and ecosystem-based management by providing essential data for delineation of marine protected areas and ecosystem restoration. Many of the maps provide high-resolution baselines that will be critical for monitoring environmental change associated with climate change, coastal development, or other forcings. High-resolution bathymetry is a critical component for modeling coastal flooding caused by storms and tsunamis, as well as inundation associated with longer term sea-level rise. Seismic-reflection and bathymetric data help characterize earthquake and tsunami sources, critical for natural-hazard assessments of coastal zones. Information on sediment distribution and thickness is essential to the understanding of local and regional sediment transport, as well as the development of regional sediment-management plans. In addition, siting of any new offshore infrastructure (for example, pipelines, cables, or renewable-energy facilities) will depend on high-resolution mapping. Finally, this mapping will both stimulate and enable new scientific research and also raise public awareness of, and education about, coastal environments and issues.

Diffuse-type Gastric Mucinous and Signet Ring Cell Adenocarcinoma in a Captive California King Snake (Lampropeltis getula californiae).

Science.gov (United States)

Hsueh, C-S; Li, W-T; Jeng, C-R; Pang, V F; Chang, H-W

2018-04-01

An adult female California king snake (Lampropeltis getula californiae) housed in Taipei Zoo was presented with a 2-week history of anorexia, fatigue and abdominal swelling. Exploratory laparotomy revealed a gastric mass with two circular perforations and multiple mottled white to beige protuberances along the mucosal surface. Histologically, the gastric mass showed an invasive, transmural growth of epithelial cells arranged in nests, lobules, acini and sheets in the mucosa and submucosa that progressively transformed into signet ring cells in the muscularis externa and subserosa. All of the neoplastic cells expressed pan-cytokeratin immunohistochemically. Based on the World Health Organization histological criteria, a diagnosis of diffuse-type gastric mucinous and signet ring cell adenocarcinoma was made. Copyright © 2018 Elsevier Ltd. All rights reserved.

Cryosphere Science Outreach using the Ice Sheet System Model and a Virtual Ice Sheet Laboratory

Science.gov (United States)

Cheng, D. L. C.; Halkides, D. J.; Larour, E. Y.

2015-12-01

Understanding the role of Cryosphere Science within the larger context of Sea Level Rise is both a technical and educational challenge that needs to be addressed if the public at large is to trulyunderstand the implications and consequences of Climate Change. Within this context, we propose a new approach in which scientific tools are used directly inside a mobile/website platform geared towards Education/Outreach. Here, we apply this approach by using the Ice Sheet System Model, a state of the art Cryosphere model developed at NASA, and integrated within a Virtual Ice Sheet Laboratory, with the goal is to outreach Cryospherescience to K-12 and College level students. The approach mixes laboratory experiments, interactive classes/lessons on a website, and a simplified interface to a full-fledged instance of ISSM to validate the classes/lessons. This novel approach leverages new insights from the Outreach/Educational community and the interest of new generations in web based technologies and simulation tools, all of it delivered in a seamlessly integrated web platform. This work was performed at the California Institute of Technology's Jet Propulsion Laboratory undera contract with the National Aeronautics and Space Administration's Cryosphere Science Program.

Assisted crack tip flipping under Mode I thin sheet tearing

DEFF Research Database (Denmark)

Felter, Christian Lotz; Nielsen, Kim Lau

2017-01-01

Crack tip flipping, where the fracture surface alternates from side to side in roughly 45° shear bands, seems to be an overlooked propagation mode in Mode I thin sheet tearing. In fact, observations of crack tip flipping is rarely found in the literature. Unlike the already established modes...

Evolution in Many-Sheeted Space-time

OpenAIRE

Pitkänen, Matti

2010-01-01

The topics of the article has been restricted to those, which seem to represent the most well-established ideas about evolution in many-sheeted space-time. a) Basic facts about and TGD based model for pre-biotic evolution are discussed. b) A model for the ATP-ADP process based on DNA as topological quantum computer vision, the identification of universal metabolic energy quanta in terms of zero point kinetic energies, and the notion of remote metabolism is discussed. c) A model f...

On the Application of Science Systems Engineering and Uncertainty Quantification for Ice Sheet Science and Sea Level Projections

Science.gov (United States)

Schlegel, Nicole-Jeanne; Boening, Carmen; Larour, Eric; Limonadi, Daniel; Schodlok, Michael; Seroussi, Helene; Watkins, Michael

2017-04-01

Research and development activities at the Jet Propulsion Laboratory (JPL) currently support the creation of a framework to formally evaluate the observational needs within earth system science. One of the pilot projects of this effort aims to quantify uncertainties in global mean sea level rise projections, due to contributions from the continental ice sheets. Here, we take advantage of established uncertainty quantification tools embedded within the JPL-University of California at Irvine Ice Sheet System Model (ISSM). We conduct sensitivity and Monte-Carlo style sampling experiments on forward simulations of the Greenland and Antarctic ice sheets. By varying internal parameters and boundary conditions of the system over both extreme and credible worst-case ranges, we assess the impact of the different parameter ranges on century-scale sea level rise projections. The results inform efforts to a) isolate the processes and inputs that are most responsible for determining ice sheet contribution to sea level; b) redefine uncertainty brackets for century-scale projections; and c) provide a prioritized list of measurements, along with quantitative information on spatial and temporal resolution, required for reducing uncertainty in future sea level rise projections. Results indicate that ice sheet mass loss is dependent on the spatial resolution of key boundary conditions - such as bedrock topography and melt rates at the ice-ocean interface. This work is performed at and supported by the California Institute of Technology's Jet Propulsion Laboratory. Supercomputing time is also supported through a contract with the National Aeronautics and Space Administration's Cryosphere program.

Narcolepsy: Fact Sheet

Science.gov (United States)

... Institutes of Health (NIH), the leading supporter of biomedical research in the world. The NINDS, along with several ... Testimony Legislative Updates Impact NINDS Contributions to Approved Therapies ... Director, Division of Intramural Research

Respirator Fact Sheet

Science.gov (United States)

... 6, 2014 Content source: National Institute for Occupational Safety and Health Education and Information Division Email Recommend Tweet YouTube Instagram Listen Watch RSS ABOUT About CDC Jobs Funding LEGAL Policies Privacy FOIA No Fear Act OIG 1600 Clifton Road Atlanta , GA 30329-4027 USA 800-CDC-INFO ( ...

CASA Fact Sheet.

Science.gov (United States)

National Court Appointed Special Advocate Association, Seattle WA.

Each year nearly 400,000 children in the United States are thrust into court through no fault of their own. Often these children also become victims of the United States' overburdened child welfare system. A Court Appointed Special Advocate (CASA) volunteer is a trained citizen who is appointed by a judge to represent the best interests of a child…

Pharmacogenomics Fact Sheet

Science.gov (United States)

... all prescription drugs. For example, it converts the painkiller codeine into its active form, morphine. There are ... patients by providing guidance on dose, possible side effects, or differences in effectiveness for people with certain ...

Penguin Fact Sheet.

Science.gov (United States)

Flotsam and Jetsam: A Newsletter for Massachusetts Marine Educators, 1985

1985-01-01

Presents factual information on penguins using an outline format. Includes descriptions of physical characteristics, behavioral mechanisms, geographical distribution, and physiological processes. Provides separate bibliographies for teachers and students. (ML)

Stroke Fact Sheet

Science.gov (United States)

... federal government website managed by the Office on Women's Health in the Office of the Assistant Secretary for Health at the U.S. Department of Health and Human Services . 200 Independence Avenue, S.W., Washington, DC 20201 1-800-994- ...

Diabetes Fact Sheet

Science.gov (United States)

... federal government website managed by the Office on Women's Health in the Office of the Assistant Secretary for Health at the U.S. Department of Health and Human Services . 200 Independence Avenue, S.W., Washington, DC 20201 1-800-994- ...

Infertility Fact Sheet

Science.gov (United States)

... federal government website managed by the Office on Women's Health in the Office of the Assistant Secretary for Health at the U.S. Department of Health and Human Services . 200 Independence Avenue, S.W., Washington, DC 20201 1-800-994- ...

Burns Fact Sheet

Science.gov (United States)

... this site from a secured browser on the server. Please enable scripts and reload this page. Sign ... disease. Please consult with a qualified health care professional for answers to personal medical questions. NIGMS is ...

Sepsis Fact Sheet

Science.gov (United States)

... this site from a secured browser on the server. Please enable scripts and reload this page. Sign ... disease. Please consult with a qualified health care professional for answers to personal medical questions. NIGMS is ...

Trauma Fact Sheet

Science.gov (United States)

... this site from a secured browser on the server. Please enable scripts and reload this page. Sign ... disease. Please consult with a qualified health care professional for answers to personal medical questions. NIGMS is ...

Outreach/education interface for Cryosphere models using the Virtual Ice Sheet Laboratory

Science.gov (United States)

Larour, E. Y.; Halkides, D. J.; Romero, V.; Cheng, D. L.; Perez, G.

2014-12-01

In the past decade, great strides have been made in the development of models capable of projecting the future evolution of glaciers and the polar ice sheets in a changing climate. These models are now capable of replicating some of the trends apparent in satellite observations. However, because this field is just now maturing, very few efforts have been dedicated to adapting these capabilities to education. Technologies that have been used in outreach efforts in Atmospheric and Oceanic sciences still have not been extended to Cryospheric Science. We present a cutting-edge, technologically driven virtual laboratory, geared towards outreach and k-12 education, dedicated to the polar ice sheets on Antarctica and Greenland, and their role as major contributors to sea level rise in coming decades. VISL (Virtual Ice Sheet Laboratory) relies on state-of-the art Web GL rendering of polar ice sheets, Android/iPhone and web portability using Javascript, as well as C++ simulations (back-end) based on the Ice Sheet System Model, the NASA model for simulating the evolution of polar ice sheets. Using VISL, educators and students can have an immersive experience into the world of polar ice sheets, while at the same exercising the capabilities of a state-of-the-art climate model, all of it embedded into an education experience that follows the new STEM standards for education.This work was performed at the California Institute of Technology's Jet Propulsion Laboratory under a contract with the National Aeronautics and Space Administration's Cryosphere Science Program.

Distributed technologies in California's energy future. Volume I

Energy Technology Data Exchange (ETDEWEB)

Christensen, M.; Craig, P.; McGuire, C.B.; Simmons, M. (eds.)

1977-09-01

This interim report contains eight of the eighteen chapters included in the complete report. In Chapter I, pertinent data, facts, and observations are made following an initial summary. Chapter II is an introduction, citing especially the writings of Amory Lovins. The criteria used in defining distributed systems, suggested by Lovins, are that the technologies be renewable, environmentally benign, local, subject to graceful failure, foolproof, flexible, comprehensible, and matched in energy quality. The following chapters are: The Energy Predicament; The California Setting; Energy Resources for California's Future; Alternative Energy Futures for California; Issues and Problems; and Directions for Future Work. Six appendices deal with residential heating loads and air conditioning, allocations, co-generation, population projections, and the California wind energy resource. (MCW)

AC/TiO2/Rubber Composite Sheet Catalysts; Fabrication, Characterization and Photocatalytic Activities

Directory of Open Access Journals (Sweden)

Sriwong Chaval

2015-01-01

Full Text Available The AC/TiO2/Rubber (ACTR composite sheets weresuccessfully fabricated by a simply mixing of fixed TiO2 suspension and natural rubber latex (60% HA contents withthe varyingamounts of activated carbon (AC suspension, followed by stirring, pouring into apetri dish mold, drying at room temperature (RT, after that taking out from a mold, reversing and drying again at RT. Then, the as-fabricated ACTR composite sheets were characterized by X-ray diffractometer (XRD, attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR, energy dispersive X-ray spectroscopy (EDS and scanning electron microscopy (SEMtechniques. The photocatalytic efficiencies of all ACTR composite sheet samples were evaluated by photo degrading of methylene blue (MB dye solution under UV light irradiation. The results showed that the photocatalytic activity of ACTR sheet with10.0wt%AC loading has the highest efficiency for the photo degradation of MB dye than the other sheets. This is due to the fact that it is relatively with the synergistic effect of well-combined titanium dioxide catalyst and activated carbon adsorbent.

Ice Sheet System Model as Educational Entertainment

Science.gov (United States)

Perez, G.

2013-12-01

Understanding the importance of polar ice sheets and their role in the evolution of Sea Level Rise (SLR), as well as Climate Change, is of paramount importance for policy makers as well as the public and schools at large. For example, polar ice sheets and glaciers currently account for 1/3 of the SLR signal, a ratio that will increase in the near to long-term future, which has tremendous societal ramifications. Consequently, it is important to increase awareness about our changing planet. In our increasingly digital society, mobile and web applications are burgeoning venues for such outreach. The Ice Sheet System Model (ISSM) is a software that was developed at the Jet Propulsion Laboratory/CalTech/NASA, in collaboration with University of California Irvine (UCI), with the goal of better understanding the evolution of polar ice sheets. It is a state-of-the-art framework, which relies on higher-end cluster-computing to address some of the aforementioned challenges. In addition, it is a flexible framework that can be deployed on any hardware; in particular, on mobile platforms such as Android or iOS smart phones. Here, we look at how the ISSM development team managed to port their model to these platforms, what the implications are for improving how scientists disseminate their results, and how a broader audience may familiarize themselves with running complex climate models in simplified scenarios which are highly educational and entertaining in content. We also look at the future plans toward a web portal fully integrated with mobile technologies to deliver the best content to the public, and to provide educational plans/lessons that can be used in grades K-12 as well as collegiate under-graduate and graduate programs.

Mulches aid in regenerating California and Oregon forests: past, present, and future

Science.gov (United States)

Philip M. McDonald; Ole T. Helgerson

1990-01-01

The use of mulches as a reforestation tool in Oregon and California began primarily in the late 1950's. Many types of mulches were tried including sheets of plastic, newspaper, and plywood; various thicknesses of bark, sawdust, sand, and straw; sprayed-on petroleum resin; and even large plastic buckets. Most proved to be ineffective, costly or both. Early trials...

UC Cooperative Extension sensory analysis panel enhances the quality of California olive oil

Directory of Open Access Journals (Sweden)

Paul Vossen

2008-05-01

Full Text Available California's olive oil industry has evolved from primarily a salvage operation of the table olive industry to a producer of world-class, premium, extra-virgin olive oil. In 1997, UC Cooperative Extension started the first California olive oil taste panel, which was officially recognized by the International Olive Council in 2001. Specific protocols were used to screen potential panelists and train them to identify defects and positive characteristics, identical to 43 other world taste panels. The UCCE panel helped the California Olive Oil Council develop a seal certification program using sensory analysis. Certification provides consumers with assurance that labeled oils are free of defects and warrant the "extra virgin" grade. Sensory evaluation using a unique UCCE profile sheet provides complete and detailed information about specific positive flavor characteristics of olive cultivars grown in California. The UCCE sensory panel has also contributed to a better understanding of the qualities of California olive oil and advancement of the industry by participating in research on pest management, cultural practices and processing.

Thermal monitoring of a granitic exfoliation sheet and cliff in Yosemite Valley, California (USA)

Science.gov (United States)

Guerin, Antoine; Matasci, Battista; Collins, Brian D.; Stock, Greg M.; Derron, Marc-Henri; Jaboyedoff, Michel

2015-04-01

In recent years, new remote sensing techniques such as Terrestrial Laser Scanner (TLS) and Infrared Thermography (IRT) have been used in parallel for rock weathering and weakness detection in slope stability analysis. Nevertheless, the effects of thermal stresses on rock face deformation are still poorly quantified, especially for steep and inaccessible cliffs. To better understand how daily temperature fluctuations influence the behavior of exfoliation joints (i.e., fractures separating exfoliation sheets), we monitored a granitic exfoliation sheet in detail using TLS and IRT over a several day period and also compiled a single TLS-IRT thermal panorama of a larger nearby granitic cliff composed of hundreds to thousands of similar exfoliation sheets. The exfoliation sheet had been previously instrumented for 3.5 years beginning in May 2010 using crackmeters and temperature sensors (Collins and Stock, 2010 and 2012), thereby providing an important baseline to compare our IRT measurements. For several consecutive days, a series of infrared thermal images (collected every 20 min.) of the exfoliation flake (19 m by 4 m by 0.1 m) was taken with a long range IRISYS IRI 4040 thermal imager, as well as several ground-based LiDAR scans, collected at 4 mm point spacing. These pictures were draped on the TLS triangular meshes to quantify the lateral propagation of temperature during the warming and cooling periods. The evolution of vertical and horizontal temperature profiles was also investigated. Results show that the sheet edge undergoes the most significant temperature changes and that warming takes place from the inside part to the border of the flake; conversely cooling takes place from the outside-inwards. Furthermore, the comparison of point clouds indicates a maximum crack aperture of over 1 cm occurring in the afternoon (12:00 to 15:00), when temperatures are at their maximum. The thermal panoramic image of the cliff (600 m wide by 300 m tall) was created using over

77 FR 64427 - Revisions to the California State Implementation Plan, San Joaquin Valley Unified Air Pollution...

Science.gov (United States)

2012-10-22

... with Steve Fields (California Department of Oil, Gas, and Geothermal Resources), August 1, 2012. \\2... VOC content) vary widely with the geological properties of the oil wells and the fact that a few... conversation with Steve Fields (California Department of Oil, Gas and Geothermal Resources), August 1, 2012. \\8...

Facts and figures in 2004

International Nuclear Information System (INIS)

Lavergne, R.; Meuric, L.; Scherrer, S.; Paquel, V.; Louati, S.; Thienard, H.

2005-01-01

This document gathers a series of articles dedicated to the situation of the energy sector in France at the end of 2004: -) the energy balance sheet, -) the trend concerning energy consumption since 1973, -) the energy bill, -) figures about electrical power, -) figures about natural gas, -) figures about solid fossil fuels, -) figures about oil, and -) figures about renewable energies. The important fact to note is that the energy bill has soared by 24.1% to reach 28.35 milliard euros which represents 1.75% of the gross national product (PIB). The evolution over the year 2004 of the factors that contribute to the level of the energy bill is: - the import-export energy quantity differential: +7.5%, - the import-export energy cost differential (in Usa dollar): +27.1%, and - the fall of the dollar: -9.1%. (A.C.)

Electronic work sheets for nuclear equipment dimensioning according to AD-Merkblaetter

International Nuclear Information System (INIS)

Rodrigues, P.R.B.

1994-01-01

The purpose of this paper is to show the capability of Work sheet applications in solving engineering problems in a much easier way than by using languages such as Fortran, BASIC etc., once many routines that would have to be developed in these languages for printing and display on screen, just to give a few instances, are already included in the Work sheet application. It is also worth mentioning the fact the never version of the Excel, version 5,0, includes the Object-oriented language Visual Basic, thus making it possible to develop routines for customization as well as compiling interactive routines speeding up the program. (author). 2 refs, 8 figs, 2 tabs

Rupture of nanoscaled water sheets in the presence of an applied electric field

Energy Technology Data Exchange (ETDEWEB)

Gopan, Nandu, E-mail: nandug@jncasr.ac.in [Engineering Mechanics Unit, Jawaharlal Nehru Centre for Advanced Scientific Research, Jakkur, Bangalore-560 064 (India)

2016-12-15

Understanding the behaviour of water sheets is relevant in numerous areas, such as thin film coating and atomisation. The rupture of planar liquid sheets are interesting due to the fact that they are objects of co-dimension 1. Previous work seems to suggest that a generic route to liquid structure fragmentation is via liquid sheets. The interplay between inertia, surface tension and viscosity is crucial in determining the dynamics of liquid sheets at a macro scale. At the nanoscale, where thermal fluctuations are expected to play a dominant role, the dynamics become more interesting. The stability and rupture dynamics of nanoscaled water sheets, at constant temperature, are studied using constrained molecular dynamics (MD) simulations. The SPC/E potential with long range electrostatics is used to simulate water molecules. The effect of an applied electric field on the stability of the nanoscaled water sheet forms the focus of this study. The effect of the initial configuration is studied by changing the random seed values used for velocity initialisation. The effect of sheet thickness on the rupture dynamics is also explored. It is seen that when large electric fields (5 V/nm) act across very thin sheets (1 layer), then breakup into multiple ellipsoidal structures is a possibility, and the response of the fluid structure to the applied electric field is non-linear. Furthermore, it is seen that Taylor's predictions for the critical electric field intensity, based on classical electro-hydrodynamics for the onset of instability in macroscopic drops, scales surprisingly well for the case of nanoscaled sheets. (paper)

Decontamination sheet

International Nuclear Information System (INIS)

Hirose, Emiko; Kanesaki, Ken.

1995-01-01

The decontamination sheet of the present invention is formed by applying an adhesive on one surface of a polymer sheet and releasably appending a plurality of curing sheets. In addition, perforated lines are formed on the sheet, and a decontaminating agent is incorporated in the adhesive. This can reduce the number of curing operation steps when a plurality steps of operations for radiation decontamination equipments are performed, and further, the amount of wastes of the cured sheets, and operator's exposure are reduced, as well as an efficiency of the curing operation can be improved, and propagation of contamination can be prevented. (T.M.)

Uncertainty Quantification for Ice Sheet Science and Sea Level Projections

Science.gov (United States)

Boening, C.; Schlegel, N.; Limonadi, D.; Schodlok, M.; Seroussi, H. L.; Larour, E. Y.; Watkins, M. M.

2017-12-01

In order to better quantify uncertainties in global mean sea level rise projections and in particular upper bounds, we aim at systematically evaluating the contributions from ice sheets and potential for extreme sea level rise due to sudden ice mass loss. Here, we take advantage of established uncertainty quantification tools embedded within the Ice Sheet System Model (ISSM) as well as sensitivities to ice/ocean interactions using melt rates and melt potential derived from MITgcm/ECCO2. With the use of these tools, we conduct Monte-Carlo style sampling experiments on forward simulations of the Antarctic ice sheet, by varying internal parameters and boundary conditions of the system over both extreme and credible worst-case ranges. Uncertainty bounds for climate forcing are informed by CMIP5 ensemble precipitation and ice melt estimates for year 2100, and uncertainty bounds for ocean melt rates are derived from a suite of regional sensitivity experiments using MITgcm. Resulting statistics allow us to assess how regional uncertainty in various parameters affect model estimates of century-scale sea level rise projections. The results inform efforts to a) isolate the processes and inputs that are most responsible for determining ice sheet contribution to sea level; b) redefine uncertainty brackets for century-scale projections; and c) provide a prioritized list of measurements, along with quantitative information on spatial and temporal resolution, required for reducing uncertainty in future sea level rise projections. Results indicate that ice sheet mass loss is dependent on the spatial resolution of key boundary conditions - such as bedrock topography and melt rates at the ice-ocean interface. This work is performed at and supported by the California Institute of Technology's Jet Propulsion Laboratory. Supercomputing time is also supported through a contract with the National Aeronautics and Space Administration's Cryosphere program.

Bayesian Inversion for Large Scale Antarctic Ice Sheet Flow

KAUST Repository

Ghattas, Omar

2015-01-07

The flow of ice from the interior of polar ice sheets is the primary contributor to projected sea level rise. One of the main difficulties faced in modeling ice sheet flow is the uncertain spatially-varying Robin boundary condition that describes the resistance to sliding at the base of the ice. Satellite observations of the surface ice flow velocity, along with a model of ice as a creeping incompressible shear-thinning fluid, can be used to infer this uncertain basal boundary condition. We cast this ill-posed inverse problem in the framework of Bayesian inference, which allows us to infer not only the basal sliding parameters, but also the associated uncertainty. To overcome the prohibitive nature of Bayesian methods for large-scale inverse problems, we exploit the fact that, despite the large size of observational data, they typically provide only sparse information on model parameters. We show results for Bayesian inversion of the basal sliding parameter field for the full Antarctic continent, and demonstrate that the work required to solve the inverse problem, measured in number of forward (and adjoint) ice sheet model solves, is independent of the parameter and data dimensions

Bayesian Inversion for Large Scale Antarctic Ice Sheet Flow

KAUST Repository

Ghattas, Omar

2015-01-01

The flow of ice from the interior of polar ice sheets is the primary contributor to projected sea level rise. One of the main difficulties faced in modeling ice sheet flow is the uncertain spatially-varying Robin boundary condition that describes the resistance to sliding at the base of the ice. Satellite observations of the surface ice flow velocity, along with a model of ice as a creeping incompressible shear-thinning fluid, can be used to infer this uncertain basal boundary condition. We cast this ill-posed inverse problem in the framework of Bayesian inference, which allows us to infer not only the basal sliding parameters, but also the associated uncertainty. To overcome the prohibitive nature of Bayesian methods for large-scale inverse problems, we exploit the fact that, despite the large size of observational data, they typically provide only sparse information on model parameters. We show results for Bayesian inversion of the basal sliding parameter field for the full Antarctic continent, and demonstrate that the work required to solve the inverse problem, measured in number of forward (and adjoint) ice sheet model solves, is independent of the parameter and data dimensions

Petroleum: A Motor Challenge Success Story

International Nuclear Information System (INIS)

Ericksen, Erika

1999-01-01

By upgrading its motor systems at its Richmond, California, refinery, Chevron was able to realize cost savings of more than $700,000 per year, in addition to reduced energy consumption of approximately 1 million kilowatts per month and improved equipment reliability and process control. Order this fact sheet to find out how they did it

Fact Sheet: Trigeminal Neuralgia

Science.gov (United States)

... Health, is the federal government’s leading supporter of biomedical research on disorders of the brain and nervous system. ... by the National Institute of Dental and Craniofacial Research. One ... mucosa). Current drug therapy is absorbed through the body, which may lead ...

Cerebral Aneurysms Fact Sheet

Science.gov (United States)

... of Health (NIH), the leading federal supporter of biomedical research in the world. As part of its mission, ... in postmenopausal women than in men. Estrogen replacement therapy reduces the ... research projects include studies of the effectiveness of microsurgical ...

Rett Syndrome Fact Sheet

Science.gov (United States)

... help them maintain adequate weight. Special academic, social, vocational, and support services may be required in some ... Are Funded Small Business Grants Overview Areas of Interest Budget Information Grant Timeline Award Information Entrepreneurial Resources ...

Marketing Transformation (Fact Sheet)

Energy Technology Data Exchange (ETDEWEB)

DOE Solar Energy Technologies Program

2011-10-13

Through the SunShot Initiative, the U.S. Department of Energy (DOE) works with manufacturers, communities, states, utilities, and other partners to enable the solar market by reducing non-hardware balance-of-system (BOS) costs, developing a skilled workforce, and eliminating market barriers to widespread adoption of solar technologies.

Adolescent Literacy. Fact Sheet

Science.gov (United States)

Alliance for Excellent Education, 2011

2011-01-01

The nation's workforce is demanding ever more literate workers and citizens. As technology advances and the American economy grows increasingly knowledge based, individuals must be able to read, write, and communicate at higher levels in order to remain economic and social contributors. A student's level of literacy is a critical determinant of…

Environmental Management Fact Sheets.

Science.gov (United States)

Department of Energy, Washington, DC.

In recent years, the need for nuclear materials has decreased and the Department of Energy (DOE) has focused greater attention on cleaning up contamination left from past activities. The Office of Environmental Management (EM) within DOE is responsible for managing waste and cleaning up contamination at DOE sites across the nation. This collection…

Children's Toys Fact Sheet

NARCIS (Netherlands)

Bremmer HJ; Veen MP van; LMB

2002-01-01

Mathematical models are available for the exposure assessment of compounds in consumer products. The computer program CONSEXPO is used for the calculations. Since the huge number of consumer products does not allow exposure assessment of every product separately, a limited number of main categories

Myasthenia Gravis Fact Sheet

Science.gov (United States)

... or duplicated without permission of the Office on Women’s Health in the U.S. Department of Health and Human Services. Citation of the source is appreciated. Page last updated: March 14, 2018. About Us Who we are What ...

Zika Virus Fact Sheet

Science.gov (United States)

... is caused by a virus transmitted primarily by Aedes mosquitoes. People with Zika virus disease can have symptoms including mild fever, skin ... framework. Q&A: Zika virus and complication ... mosquito from the Aedes genus, mainly Aedes aegypti in tropical regions. Aedes ...

Dietary Supplement Fact Sheets

Science.gov (United States)

... Primary Mitochondrial Disorders Weight Loss A Acai Aloe Vera Anabolic Steroids Antioxidants (see Exercise and Athletic Performance ) ... Pills (see Weight Loss ) Dietary Supplements Vitamin D E Echinacea Ephedra Essiac/Flor-Essence European Elder Evening ...

Buffer Zone Fact Sheets

Science.gov (United States)

New requirements for buffer zones and sign posting contribute to soil fumigant mitigation and protection for workers and bystanders. The buffer provides distance between the pesticide application site and bystanders, reducing exposure risk.

Ovarian Cancer Fact Sheet

Science.gov (United States)

... federal government website managed by the Office on Women's Health in the Office of the Assistant Secretary for Health at the U.S. Department of Health and Human Services . 200 Independence Avenue, S.W., Washington, DC 20201 1-800-994- ...

Uterine Fibroids Fact Sheet

Science.gov (United States)

... federal government website managed by the Office on Women's Health in the Office of the Assistant Secretary for Health at the U.S. Department of Health and Human Services . 200 Independence Avenue, S.W., Washington, DC 20201 1-800-994- ...

Drug Facts

Medline Plus

Full Text Available ... Facts Bath Salts Facts Cocaine (Coke, Crack) Facts Heroin (Smack, Junk) Facts Marijuana (Weed, Pot) Facts MDMA ( ... Videos Information About Drugs Alcohol Bath Salts Cocaine Heroin Marijuana MDMA Meth Pain Medicines Spice (K2) Tobacco/ ...

Facts on Employee Assistance Programs. Clearinghouse Fact Sheet.

Science.gov (United States)

Desmond, Thomas C.

Employee Assistance Programs (EAPs) offer employees confidential, professional assistance for the kinds of personal problems that adversely affect their lives and their jobs. These programs started when acute worker shortages during World War II, coupled with the successes of Alcoholic Anonymous, prompted some companies in the 1940s to develop…

Application of GRACE to the Evaluation of an Ice Flow Model of the Greenland Ice Sheet

Science.gov (United States)

Schlegel, N.; Wiese, D. N.; Watkins, M. M.; Larour, E. Y.; Box, J. E.; Fettweis, X.; van den Broeke, M. R.; Morlighem, M.; Boening, C.; Seroussi, H. L.

2014-12-01

Quantifying Greenland's future contribution to sea level rise is a challenging task and requires accurate estimates of ice flow sensitivity to climate change. Transient ice flow models are promising tools for estimating future ice sheet behavior. However, confidence in these types of future projections is low, especially because evaluation of model historical runs is so challenging due to the scarcity of continental-wide data for validation. For more than a decade, NASA's GRACE has continuously acquired time-variable measurements of the Earth's gravity field and has provided unprecedented surveillance of mass balance of the ice sheets, offering an opportunity for ice sheet model evaluation. Here, we take advantage of a new high-resolution (~300 km) monthly mascon solution for the purpose of mass balance comparison with an independent, historical ice flow model simulation using the Ice Sheet System Model (ISSM). The comparison highlights which regions of the ice sheet differ most from GRACE. Investigation of regional differences in trends and seasonal amplitudes between simulations forced with three different Regional Climate Model (RCM)-based estimates of surface mass balance (SMB) allows us to make conclusions about the relative contributions of various error sources in the model hindcast. This study constitutes the first regional comparison of GRACE data and an ice sheet model. Conclusions will aid in the improvement of RCM SMB estimates as well as ice sheet simulation estimates of present and future rates of sea level rise. This work was performed at the California Institute of Technology's Jet Propulsion Laboratory under a contract with the National Aeronautics and Space Administration's Cryosphere Program and President's and Director's Fund Program.

Dense sheet Z-pinches

International Nuclear Information System (INIS)

Tetsu, Miyamoto

1999-01-01

The steady state and quasi-steady processes of infinite- and finite-width sheet z-pinches are studied. The relations corresponding to the Bennett relation and Pease-Braginskii current of cylindrical fiber z-pinches depend on a geometrical factor in the sheet z-pinches. The finite-width sheet z-pinch is approximated by a segment of infinite-width sheet z-pinch, if it is wide enough, and corresponds to a number of (width/thickness) times fiber z-pinch plasmas of the diameter that equals the sheet thickness. If the sheet current equals this number times the fiber current, the plasma created in the sheet z-pinches is as dense as in the fiber z-pinches. The total energy of plasma and magnetic field per unit mass is approximately equal in both pinches. Quasi-static transient processes are different in several aspects from the fiber z-pinch. No radiation collapse occurs in the sheet z-pinch. The stability is improved in the sheet z-pinches. The fusion criterions and the experimental arrangements to produce the sheet z-pinches are also discussed. (author)

Thermo Physics Facilities Branch Brochure ARC Jet Complex Fact Sheets, Hypervelocity Free-Flight Aerodynamic Facility Fact Sheets, Ames Vertical Gun Range Fact Sheets

Science.gov (United States)

Fretter, E. F. (Editor); Kuhns, Jay (Editor); Nuez, Jay (Editor)

2003-01-01

The Ames Arc Jet Complex has a rich heritage of over 40 years in Thermal Protection System (TPS) development for every NASA Space Transportation and Planetary program, including Apollo, Space Shuttle, Viking, Pioneer-Venus, Galileo, Mars Pathfinder,Stardust, NASP,X-33,X-34,SHARP-B1 and B2,X-37 and Mars Exploration Rovers. With this early TPS history came a long heritage in the development of the arc jet facilities. These are used to simulate the aerodynamic heating that occurs on the nose cap, wing leading edges and on other areas of the spacecraft requiring thermal protection. TPS samples have been run in the arc jets from a few minutes to over an hour,from one exposure to multiple exposures of the same sample, in order t o understand the TPS materials response to a hot gas flow environment (representative of real hyperthermal environments experienced in flight). The Ames Arc l e t Complex is a key enabler for customers involved in the three major areas of TPS development: selection, validation, and qualification. The arc jet data are critical for validating TPS thermal models, heat shield designs and repairs, and ultimately for flight qualification.

Drug Facts

Medline Plus

Full Text Available ... Cocaine (Coke, Crack) Facts Heroin (Smack, Junk) Facts Marijuana (Weed, Pot) Facts MDMA (Ecstasy, Molly) Facts Meth ( ... Information About Drugs Alcohol Bath Salts Cocaine Heroin Marijuana MDMA Meth Pain Medicines Spice (K2) Tobacco/Nicotine ...

Drug Facts

Medline Plus

Full Text Available ... Heroin (Smack, Junk) Facts Marijuana (Weed, Pot) Facts MDMA (Ecstasy, Molly) Facts Meth (Crank, Ice) Facts Pain ... About Drugs Alcohol Bath Salts Cocaine Heroin Marijuana MDMA Meth Pain Medicines Spice (K2) Tobacco/Nicotine Other ...

Drug Facts

Medline Plus

Full Text Available ... That People Abuse Alcohol Facts Bath Salts Facts Cocaine (Coke, Crack) Facts Heroin (Smack, Junk) Facts Marijuana ( ... Watch Videos Information About Drugs Alcohol Bath Salts Cocaine Heroin Marijuana MDMA Meth Pain Medicines Spice (K2) ...

Drug Facts

Medline Plus

Full Text Available ... MDMA (Ecstasy, Molly) Facts Meth (Crank, Ice) Facts Pain Medicine (Oxy, Vike) Facts Spice (K2) Facts Tobacco ... Alcohol Bath Salts Cocaine Heroin Marijuana MDMA Meth Pain Medicines Spice (K2) Tobacco/Nicotine Other Drugs You ...

Drug Facts

Medline Plus

Full Text Available ... Crank, Ice) Facts Pain Medicine (Oxy, Vike) Facts Spice (K2) Facts Tobacco and Nicotine Facts Other Drugs ... Salts Cocaine Heroin Marijuana MDMA Meth Pain Medicines Spice (K2) Tobacco/Nicotine Other Drugs You can call ...

Drug Facts

Medline Plus

Full Text Available ... Ice) Facts Pain Medicine (Oxy, Vike) Facts Spice (K2) Facts Tobacco and Nicotine Facts Other Drugs of ... Cocaine Heroin Marijuana MDMA Meth Pain Medicines Spice (K2) Tobacco/Nicotine Other Drugs You can call 1- ...

Drug Facts

Medline Plus

Full Text Available ... That People Abuse Alcohol Facts Bath Salts Facts Cocaine (Coke, Crack) Facts Heroin (Smack, Junk) Facts Marijuana (Weed, ... Watch Videos Information About Drugs Alcohol Bath Salts Cocaine Heroin Marijuana MDMA Meth Pain Medicines Spice (K2) ...

Drug Facts

Medline Plus

Full Text Available ... Ecstasy, Molly) Facts Meth (Crank, Ice) Facts Pain Medicine (Oxy, Vike) Facts Spice (K2) Facts Tobacco and ... Bath Salts Cocaine Heroin Marijuana MDMA Meth Pain Medicines Spice (K2) Tobacco/Nicotine Other Drugs You can ...

Drug Facts

Medline Plus

Full Text Available ... Cocaine (Coke, Crack) Facts Heroin (Smack, Junk) Facts Marijuana (Weed, Pot) Facts MDMA (Ecstasy, Molly) Facts Meth (Crank, ... Information About Drugs Alcohol Bath Salts Cocaine Heroin Marijuana MDMA Meth Pain Medicines Spice (K2) Tobacco/Nicotine ...

Sheet resistance effects in mercury cadmium telluride implanted photodiodes

International Nuclear Information System (INIS)

Fiorito, G.; Gasparrini, G.; Svelto, F.

1977-01-01

The frequency response of Hg + implanted Hgsub(1-x)Cdsub(x)Te photodiodes is discussed. This analysis, evaluating both the response to fast laser pulses and the 3 dB rolloff of the diode shot-noise spectrum, showed the necessity of adopting a distributed equivalent circuit model taking into account the implanted layer sheet resistance. Frequency behaviour, in fact, proved not to match a simple p-n junction model based on a lumped standard equivalent circuit. On this basis apparent anomalies previously reported can be explained, and useful suggestions can be obtained for design and fabrication of fast detectors. (author)

Non-Abelian flux tubes in N=1 SQCD: Supersizing world-sheet supersymmetry

International Nuclear Information System (INIS)

Shifman, M.; Yung, A.

2005-01-01

We consider non-Abelian 1/2 Bogomol'nyi-Prasad-Sommerfield (BPS) flux tubes (strings) in a deformed N=2 supersymmetric gauge theory, with mass terms μ 1,2 of the adjoint fields breaking N=2 down to N=1. The main feature of the non-Abelian strings is the occurrence of orientational moduli associated with the possibility of rotations of their color fluxes inside a global SU(N) group. The bulk four-dimensional theory has four supercharges; half-criticality of the non-Abelian strings would imply then N=1 supersymmetry on the world sheet, i.e. two supercharges. In fact, superalgebra of the reduced moduli space has four supercharges. Internal dynamics of the orientational moduli are described by a two-dimensional CP(N-1) model on the string world sheet. We focus mainly on the SU(2) case, i.e. CP(1) world-sheet theory. We show that non-Abelian BPS strings exist for all values of μ 1,2 . The low-energy theory of moduli is indeed CP(1), with four supercharges, in a wide region of breaking parameters μ 1,2 . Only in the limit of very large μ 1,2 , above some critical value does the N=2 world-sheet supersymmetry break down to N=1. We observe 'supersymmetry emergence' for the flux-tube junction (confined monopole): The kink-monopole is half-critical considered from the standpoint of the world-sheet CP(1) model (i.e. two supercharges conserved), while in the bulk N=1 theory there is no monopole central charge at all

Relation between current sheets and vortex sheets in stationary incompressible MHD

Directory of Open Access Journals (Sweden)

D. H. Nickeler

2012-03-01

Full Text Available Magnetohydrodynamic configurations with strong localized current concentrations and vortices play an important role in the dissipation of energy in space and astrophysical plasma. Within this work we investigate the relation between current sheets and vortex sheets in incompressible, stationary equilibria. For this approach it is helpful that the similar mathematical structure of magnetohydrostatics and stationary incompressible hydrodynamics allows us to transform static equilibria into stationary ones. The main control function for such a transformation is the profile of the Alfvén-Mach number MA, which is always constant along magnetic field lines, but can change from one field line to another. In the case of a global constant MA, vortices and electric current concentrations are parallel. More interesting is the nonlinear case, where MA varies perpendicular to the field lines. This is a typical situation at boundary layers like the magnetopause, heliopause, the solar wind flowing around helmet streamers and at the boundary of solar coronal holes. The corresponding current and vortex sheets show in some cases also an alignment, but not in every case. For special density distributions in 2-D, it is possible to have current but no vortex sheets. In 2-D, vortex sheets of field aligned-flows can also exist without strong current sheets, taking the limit of small Alfvén Mach numbers into account. The current sheet can vanish if the Alfvén Mach number is (almost constant and the density gradient is large across some boundary layer. It should be emphasized that the used theory is not only valid for small Alfvén Mach numbers MA MA ≲ 1. Connection to other theoretical approaches and observations and physical effects in space plasmas are presented. Differences in the various aspects of theoretical investigations of current sheets and vortex sheets are given.

Intraday monitoring of granitic exfoliation sheets with LiDAR and thermal imaging (Yosemite Valley, California, USA)

Science.gov (United States)

Guerin, Antoine; Derron, Marc-Henri; Jaboyedoff, Michel; Abellán, Antonio; Dubas, Olivier; Collins, Brian D.; Stock, Greg M.

2016-04-01

Rockfall activity in Yosemite Valley is often linked to the presence of exfoliation sheets associated with other structures such as faults, joints or geological contacts. Daily and seasonal temperature variations or freeze-thaw cycles may strongly promote crack propagation along discontinuities, ultimately leading to rockfalls (Stock et al., 2013). However, little is known concerning the impact of thermal variations on rock face deformation, despite its occurrence at all times of year. To understand the influence of daily temperature fluctuations on the behavior of exfoliation joints (i.e., fractures separating exfoliation sheets), we carried out two different experiments in October 2015: (a) We first monitored a sub-vertical granodiorite flake (19 m by 4 m by 0.1 m ; Collins and Stock, 2014) for 24 consecutive hours using LiDAR and infrared thermal sensors; (b) We monitored a rock cliff (60 m by 45 m) composed of tens of exfoliation sheets located on the southeast face of El Capitan (an ~1000-m-tall cliff located in western Yosemite Valley) for several hours (from 05:30 pm to 01:30 am) to investigate the diurnal cooling effect on rocks of different lithologies. To calibrate the raw apparent temperature measured by the thermal imager (FLIR T660 infrared camera), we fixed pieces of reflective paper (aluminum foil) and black duct tape on both monitored cliffs to measure the reflected temperature and the emissivity of the different rocks. In addition, ambient temperature and relative humidity readings were performed for each acquisition. We then compared the calibrated temperatures to the values registered by resistance temperature detectors (Pt100 sensors), also attached to the rock. Finally, we compared the millimeter scale deformations observed with LiDAR to the values measured by manual crackmeters (standard analog comparators with springs) installed beforehand in the fractures. For the first experiment (24-hour monitoring), a series of measurements were carried

An ice sheet model validation framework for the Greenland ice sheet

Science.gov (United States)

Price, Stephen F.; Hoffman, Matthew J.; Bonin, Jennifer A.; Howat, Ian M.; Neumann, Thomas; Saba, Jack; Tezaur, Irina; Guerber, Jeffrey; Chambers, Don P.; Evans, Katherine J.; Kennedy, Joseph H.; Lenaerts, Jan; Lipscomb, William H.; Perego, Mauro; Salinger, Andrew G.; Tuminaro, Raymond S.; van den Broeke, Michiel R.; Nowicki, Sophie M. J.

2017-01-01

We propose a new ice sheet model validation framework - the Cryospheric Model Comparison Tool (CmCt) - that takes advantage of ice sheet altimetry and gravimetry observations collected over the past several decades and is applied here to modeling of the Greenland ice sheet. We use realistic simulations performed with the Community Ice Sheet Model (CISM) along with two idealized, non-dynamic models to demonstrate the framework and its use. Dynamic simulations with CISM are forced from 1991 to 2013, using combinations of reanalysis-based surface mass balance and observations of outlet glacier flux change. We propose and demonstrate qualitative and quantitative metrics for use in evaluating the different model simulations against the observations. We find that the altimetry observations used here are largely ambiguous in terms of their ability to distinguish one simulation from another. Based on basin-scale and whole-ice-sheet-scale metrics, we find that simulations using both idealized conceptual models and dynamic, numerical models provide an equally reasonable representation of the ice sheet surface (mean elevation differences of framework demonstrates that our proposed metrics can distinguish relatively better from relatively worse simulations and that dynamic ice sheet models, when appropriately initialized and forced with the right boundary conditions, demonstrate a predictive skill with respect to observed dynamic changes that have occurred on Greenland over the past few decades. An extensible design will allow for continued use of the CmCt as future altimetry, gravimetry, and other remotely sensed data become available for use in ice sheet model validation.

Land subsidence in the southwestern Mojave Desert, California, 1992–2009

Science.gov (United States)

Brandt, Justin; Sneed, Michelle

2017-07-19

Groundwater has been the primary source of domestic, agricultural, and municipal water supplies in the southwestern Mojave Desert, California, since the early 1900s. Increased demands on water supplies have caused groundwater-level declines of more than 100 feet (ft) in some areas of this desert between the 1950s and the 1990s (Stamos and others, 2001; Sneed and others, 2003). These water-level declines have caused the aquifer system to compact, resulting in land subsidence. Differential land subsidence (subsidence occurring at different rates across the landscape) can alter surface drainage routes and damage surface and subsurface infrastructure. For example, fissuring across State Route 247 at Lucerne Lake has required repairs as has pipeline infrastructure near Troy Lake.Land subsidence within the Mojave River and Morongo Groundwater Basins of the southwestern Mojave Desert has been evaluated using InSAR, ground-based measurements, geology, and analyses of water levels between 1992 and 2009 (years in which InSAR data were collected). The results of the analyses were published in three USGS reports— Sneed and others (2003), Stamos and others (2007), and Solt and Sneed (2014). Results from the latter two reports were integrated with results from other USGS/ MWA cooperative groundwater studies into the broader scoped USGS Mojave Groundwater Resources Web site (http://ca.water.usgs.gov/ mojave/). This fact sheet combines the detailed analyses from the three subsidence reports, distills them into a longer-term context, and provides an assessment of options for future monitoring.

Drug Facts

Medline Plus

Full Text Available ... form Search Menu Home Drugs That People Abuse Alcohol Facts Bath Salts Facts Cocaine (Coke, Crack) Facts ... addiction, and treatment. Watch Videos Information About Drugs Alcohol Bath Salts Cocaine Heroin Marijuana MDMA Meth Pain ...

Drug Facts

Medline Plus

Full Text Available ... Facts Search form Search Menu Home Drugs That People Abuse Alcohol Facts Bath Salts Facts Cocaine (Coke, ... Drugs? Effects of Drugs Drug Use and Other People Drug Use and Families Drug Use and Kids ...

Drug Facts

Medline Plus

Full Text Available ... Home Drugs That People Abuse Alcohol Facts Bath Salts Facts Cocaine (Coke, Crack) Facts Heroin (Smack, Junk) ... treatment. Watch Videos Information About Drugs Alcohol Bath Salts Cocaine Heroin Marijuana MDMA Meth Pain Medicines Spice ( ...

Constitutive modeling for analysis and design of aluminum sheet forming processes

International Nuclear Information System (INIS)

Barlat, F.; Chung, K.; Yoon, J-W.; Choi, S-H.

2000-01-01

Finite element modeling (FEM) technology is one of the most powerful tools used to design new products, i.e. appliances, automotive, rigid packaging and aerospace parts, etc., and processes. However, FEM users need data and models to characterize the materials used to fabricate the new products. In fact, they need more information than the traditional and standard yield strength, ultimate strength, elongation, etc. Constitutive models and their associated coefficients represent a new way to describe material properties, a way that can be used by FEM users. In order to help manufacturers use more aluminum alloy sheet in their products, appropriate material models are needed to analyze and design specifically for these materials. This work describes a methodology that provides phenomenological constitutive equations based on three main microstructure components of aluminum alloys: dislocation density, second-phase particles and crystallographic texture. Examples of constitutive equations and their applications to numerical sheet forming process analysis and design are provided in this work. (author)

Drug Facts

Medline Plus

Full Text Available ... Pain Medicine (Oxy, Vike) Facts Spice (K2) Facts Tobacco and Nicotine Facts Other Drugs of Abuse What ... Heroin Marijuana MDMA Meth Pain Medicines Spice (K2) Tobacco/Nicotine Other Drugs You can call 1-800- ...

Drug Facts

Medline Plus

Full Text Available ... Oxy, Vike) Facts Spice (K2) Facts Tobacco and Nicotine Facts Other Drugs of Abuse What is Addiction? ... Marijuana MDMA Meth Pain Medicines Spice (K2) Tobacco/Nicotine Other Drugs You can call 1-800-662- ...

Laminin-521 Promotes Rat Bone Marrow Mesenchymal Stem Cell Sheet Formation on Light-Induced Cell Sheet Technology

Directory of Open Access Journals (Sweden)

Zhiwei Jiang

2017-01-01

Full Text Available Rat bone marrow mesenchymal stem cell sheets (rBMSC sheets are attractive for cell-based tissue engineering. However, methods of culturing rBMSC sheets are critically limited. In order to obtain intact rBMSC sheets, a light-induced cell sheet method was used in this study. TiO2 nanodot films were coated with (TL or without (TN laminin-521. We investigated the effects of laminin-521 on rBMSCs during cell sheet culturing. The fabricated rBMSC sheets were subsequently assessed to study cell sheet viability, reattachment ability, cell sheet thickness, collagen type I deposition, and multilineage potential. The results showed that laminin-521 could promote the formation of rBMSC sheets with good viability under hyperconfluent conditions. Cell sheet thickness increased from an initial 26.7 ± 1.5 μm (day 5 up to 47.7 ± 3.0 μm (day 10. Moreover, rBMSC sheets maintained their potential of osteogenic, adipogenic, and chondrogenic differentiation. This study provides a new strategy to obtain rBMSC sheets using light-induced cell sheet technology.

Stiffness management of sheet metal parts using laser metal deposition

Science.gov (United States)

Bambach, Markus; Sviridov, Alexander; Weisheit, Andreas

2017-10-01

Tailored blanks are established solutions for the production of load-adapted sheet metal components. In the course of the individualization of production, such semi-finished products are gaining importance. In addition to tailored welded blanks and tailored rolled blanks, patchwork blanks have been developed which allow a local increase in sheet thickness by welding, gluing or soldering patches onto sheet metal blanks. Patchwork blanks, however, have several limitations, on the one hand, the limited freedom of design in the production of patchwork blanks and, on the other hand, the fact that there is no optimum material bonding with the substrate. The increasing production of derivative and special vehicles on the basis of standard vehicles, prototype production and the functionalization of components require solutions with which semi-finished products and sheet metal components can be provided flexibly with local thickenings or functional elements with a firm metallurgical bond to the substrate. An alternative to tailored and patchwork blanks is, therefore, a free-form reinforcement applied by additive manufacturing via laser metal deposition (LMD). By combining metal forming and additive manufacturing, stiffness can be adapted to the loads based on standard components in a material-efficient manner and without the need to redesign the forming tools. This paper details a study of the potential of stiffness management by LMD using a demonstrator part. Sizing optimization is performed and part distortion is taken into account to find an optimal design for the cladding. A maximum stiffness increase of 167% is feasible with only 4.7% additional mass. Avoiding part distortion leads to a pareto-optimal design which achieves 95% more stiffness with 6% added mass.

The Trading Balance Sheet Of Romania - Two Decades With An Annual Adverse Sold

Directory of Open Access Journals (Sweden)

Simona Corina GUDEI

2011-03-01

Full Text Available The current communication, expressing the entirely special importance that must be granted to the fact that for two decades, year after year, the sold of the trading balance sheet of Romania was adverse. Moreover, it has increased greatly during the decade 2000-2009 towards the previous decade 1990-1999, respectively from 20 milliards dollars to 100 milliards of dollars, with especially serious consequences both on the external and on the internal economic balance.

Energy Fact Sheets - Sandia Energy

Science.gov (United States)

Energy Energy Secure & Sustainable Energy Future Search Icon Sandia Home Locations Contact Us Employee Locator Menu Stationary Power solar Energy Conversion Efficiency Increasing the amount of electricity produced from a given thermal energy input. Solar Energy Wind Energy Water Power Supercritical CO2

Weatherization Assistance Program Fact Sheet

Energy Technology Data Exchange (ETDEWEB)

None

2018-02-01

The U.S. Department of Energy’s (DOE) Weatherization Assistance Program reduces energy costs for low-income households by increasing the energy e ciency of their homes, while ensuring their health and safety. The Program supports 8,500 jobs and provides weatherization services to approximately 35,000 homes every year using DOE funds.

State Energy Program Fact Sheet

Energy Technology Data Exchange (ETDEWEB)

None

2018-02-01

The U.S. Department of Energy’s State Energy Program (SEP) provides funding and technical assistance to states, territories, and the District of Columbia to enhance energy security, advance state-led energy initiatives, and maximize the benefits of decreasing energy waste.

Fact Sheets - The National Guard

Science.gov (United States)

National Guard About Us By the Numbers Contact Us FAQ Federal Mission History Join Us Leaders Director of March Today in Guard History Leadership CNGB VCNGB SEA DANG DARNG Joint Staff J-1 J-2 J-3 J-4 J-5 J-6 J Marshal Office of the Joint Surgeon PARC Small Business Programs Chaplain Diversity NGB-GOMO Resources

Immigrant Education: A Fact Sheet.

Science.gov (United States)

Aleman, Steven R.

This report provides information on immigrant education in the United States in the areas of funding, participation, population, services, and allocation method. Additionally, it explores reauthorization issues confronting the Emergency Immigrant Education Act for fiscal year 1994. The report shows that: (1) there has been a steady decrease in…

Afghanistan [Education Sector Fact Sheet

Science.gov (United States)

US Agency for International Development, 2015

2015-01-01

Three decades of conflict devastated Afghanistan's education systems and institutions. In 2002, an estimated 900,000 boys attended school, while women and girls were almost completely excluded from educational opportunities. Since then, the Afghan government, USAID, and international donors have worked closely to rebuild Afghanistan's education…

Integrated Vegetation Management Fact Sheet

Science.gov (United States)

IVM is generally defined as the practice of promoting desirable, stable, low-growing plant communities that will resist invasion by tall growing tree species through the use of appropriate, environmentally-sound, and cost-effective control methods.

Asthma in Adults Fact Sheet

Science.gov (United States)

... American Lung Association Epidemiology and Statistics Unit using SPSS software. Center for Disease Control and Prevention. Behavioral Risk Factor Surveillance Survey, 2016. Analysis by the American Lung Association Epidemiology and Statistics ...

Force Protection Basing: Fact Sheet

Science.gov (United States)

2017-11-29

manpower. The effort in FY17 included Doctrine, Organization, Training, Materiel, Leadership , Personnel, and Facilities (DOTMLPF) integration and...base with modular reusable protection available for relocation. Technologies from this STO-D allowed improved planning, troop-to-task management , and...in an operationally feasible timeframe. 1D. Why should Army leadership care about this: During full spectrum operations, to negate a threat’s

Accelerating Geothermal Research (Fact Sheet)

Energy Technology Data Exchange (ETDEWEB)

2014-05-01

Geothermal research at the National Renewable Energy Laboratory (NREL) is advancing geothermal technologies to increase renewable power production. Continuous and not dependent on weather, the geothermal resource has the potential to jump to more than 500 gigawatts in electricity production, which is equivalent to roughly half of the current U.S. capacity. Enhanced geothermal systems have a broad regional distribution in the United States, allowing the potential for development in many locations across the country.

WEO-2007 Fact Sheet: China

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-07-01

It is scarcely in doubt that China's energy needs will continue to grow and fuel its economic development. Less certain, however, is the rate of increase and how those needs are going to be met, as they depend on just how quickly the economy expands and on the economic and energy policy landscape worldwide. Rising incomes will surely underpin strong growth for transport and housing, the use of electric appliances and space heating and cooling.

Condom Fact Sheet in Brief

Science.gov (United States)

... transmitted only by genital fluids (STDs such as gonorrhea, chlamydia, trichomoniasis, and HIV infection) than against infections ... transmitted by genital fluids (STDs such as chlamydia, gonorrhea, and trichomoniasis). Consistent and correct use of latex ...

Amchitka, Alaska Site Fact Sheet

International Nuclear Information System (INIS)

2011-01-01

Amchitka Island is near the western end of the Aleutian Island chain and is the largest island in the Rat Island Group that is located about 1,340 miles west-southwest of Anchorage, Alaska, and 870 miles east of the Kamchatka Peninsula in eastern Russia. The island is 42 miles long and 1 to 4 miles wide, with an area of approximately 74,240 acres. Elevations range from sea level to more than 1,100 feet above sea level. The coastline is rugged; sea cliffs and grassy slopes surround nearly the entire island. Vegetation on the island is low-growing, meadow-like tundra grasses at lower elevations. No trees grow on Amchitka. The lowest elevations are on the eastern third of the island and are characterized by numerous shallow lakes and heavily vegetated drainages. The central portion of the island has higher elevations and fewer lakes. The westernmost 3 miles of the island contains a windswept rocky plateau with sparse vegetation

At-Risk Students Fact Sheet

Science.gov (United States)

Montana Office of Public Instruction, 2016

2016-01-01

Montana's definition of a basic system of quality public elementary and secondary schools includes educational programs for at-risk students (20-9-309, MCA). State statute defines an at-risk student as a "student who is affected by environmental conditions that negatively impact the student's educational performance or threaten a student's…

Advanced Algal Systems Fact Sheet

Energy Technology Data Exchange (ETDEWEB)

None

2016-06-01

Research and development (R&D) on advanced algal biofuels and bioproducts presents an opportunity to sustainably expand biomass resource potential in the United States. The Bioenergy Technologies Office’s (BETO’s) Advanced Algal Systems Program is carrying out a long-term, applied R&D strategy to lower the costs of algal biofuel production by working with partners to develop revolutionary technologies and conduct crosscutting analyses to better understand the potential

Low Back Pain Fact Sheet

Science.gov (United States)

... arthritis. Potential tests include complete blood count, erythrocyte sedimentation rate, and C-reactive protein. Blood tests may ... size and relieving pressure on the nerves. Several channels may be made depending on how tissue needs ...

Bomb Threat Assessments. Fact Sheet

Science.gov (United States)

Tunkel, Ronald F.

2010-01-01

This information provides a brief, summary outline of how investigators should assess anonymous bomb threats at schools. Applying these principles may help administrators and law enforcement personnel accurately assess the viability and credibility of a threat and appropriately gauge their response. Any credible evidence provided by teachers or…

Energy DataBus (Fact Sheet)

Energy Technology Data Exchange (ETDEWEB)

2013-07-01

NREL has developed the Energy DataBus, an open-sourced software that collects massive amounts of energy-related data at second-to-second intervals; stores it in a massive, scalable database; and turns it into useful information.

Lycopodium: Careful Harvest Fact Sheet

Science.gov (United States)

Elizabeth Nauertz

2003-01-01

Lycopodium comes from the Greek words "luko" (wolf) and "podos" (foot); thus the common name of "wolf's paw" or "Wolf's foot." Despite the common names of clubmoss, Lycopodium species are not related to mosses, but rather to ferns. They are evergreen, perennial, clonal, and rhizomatous in nature.

Uncertainties in the Antarctic Ice Sheet Contribution to Sea Level Rise: Exploration of Model Response to Errors in Climate Forcing, Boundary Conditions, and Internal Parameters

Science.gov (United States)

Schlegel, N.; Seroussi, H. L.; Boening, C.; Larour, E. Y.; Limonadi, D.; Schodlok, M.; Watkins, M. M.

2017-12-01

The Jet Propulsion Laboratory-University of California at Irvine Ice Sheet System Model (ISSM) is a thermo-mechanical 2D/3D parallelized finite element software used to physically model the continental-scale flow of ice at high resolutions. Embedded into ISSM are uncertainty quantification (UQ) tools, based on the Design Analysis Kit for Optimization and Terascale Applications (DAKOTA) software. ISSM-DAKOTA offers various UQ methods for the investigation of how errors in model input impact uncertainty in simulation results. We utilize these tools to regionally sample model input and key parameters, based on specified bounds of uncertainty, and run a suite of continental-scale 100-year ISSM forward simulations of the Antarctic Ice Sheet. Resulting diagnostics (e.g., spread in local mass flux and regional mass balance) inform our conclusion about which parameters and/or forcing has the greatest impact on century-scale model simulations of ice sheet evolution. The results allow us to prioritize the key datasets and measurements that are critical for the minimization of ice sheet model uncertainty. Overall, we find that Antartica's total sea level contribution is strongly affected by grounding line retreat, which is driven by the magnitude of ice shelf basal melt rates and by errors in bedrock topography. In addition, results suggest that after 100 years of simulation, Thwaites glacier is the most significant source of model uncertainty, and its drainage basin has the largest potential for future sea level contribution. This work is performed at and supported by the California Institute of Technology's Jet Propulsion Laboratory. Supercomputing time is also supported through a contract with the National Aeronautics and Space Administration's Cryosphere program.

Radiation protecting sheet

International Nuclear Information System (INIS)

Makiguchi, Hiroshi.

1989-01-01

As protection sheets used in radioactivity administration areas, a thermoplastic polyurethane composition sheet with a thickness of less 0.5 mm, solid content (ash) of less than 5% and a shore D hardness of less than 60 is used. A composite sheet with thickness of less than 0.5 mm laminated or coated with such a thermoplastic polyurethane composition as a surface layer and the thermoplastic polyurethane composition sheet applied with secondary fabrication are used. This can satisfy all of the required properties, such as draping property, abrasion resistance, high breaking strength, necking resistance, endurance strength, as well as chemical resistance and easy burnability in burning furnace. Further, by forming uneveness on the surface by means of embossing, etc. safety problems such as slippage during operation and walking can be overcome. (T.M.)

Numerical analysis of tailored sheets to improve the quality of components made by SPIF

Science.gov (United States)

Gagliardi, Francesco; Ambrogio, Giuseppina; Cozza, Anna; Pulice, Diego; Filice, Luigino

2018-05-01

In this paper, the authors pointed out a study on the profitable combination of forming techniques. More in detail, the attention has been put on the combination of the single point incremental forming (SPIF) and, generally, speaking, of an additional process that can lead to a material thickening on the initial blank considering the local thinning which the sheets undergo at. Focalizing the attention of the research on the excessive thinning of parts made by SPIF, a hybrid approach can be thought as a viable solution to reduce the not homogeneous thickness distribution of the sheet. In fact, the basic idea is to work on a blank previously modified by a deformation step performed, for instance, by forming, additive or subtractive processes. To evaluate the effectiveness of this hybrid solution, a FE numerical model has been defined to analyze the thickness variation on tailored sheets incrementally formed optimizing the material distribution according to the shape to be manufactured. Simulations based on the explicit formulation have been set up for the model implementation. The mechanical properties of the sheet material have been taken in literature and a frustum of cone as benchmark profile has been considered for the performed analysis. The outcomes of numerical model have been evaluated in terms of both maximum thinning and final thickness distribution. The feasibility of the proposed approach will be deeply detailed in the paper.

Automobile sheet metal part production with incremental sheet forming

Directory of Open Access Journals (Sweden)

İsmail DURGUN

2016-02-01

Full Text Available Nowadays, effect of global warming is increasing drastically so it leads to increased interest on energy efficiency and sustainable production methods. As a result of adverse conditions, national and international project platforms, OEMs (Original Equipment Manufacturers, SMEs (Small and Mid-size Manufacturers perform many studies or improve existing methodologies in scope of advanced manufacturing techniques. In this study, advanced manufacturing and sustainable production method "Incremental Sheet Metal Forming (ISF" was used for sheet metal forming process. A vehicle fender was manufactured with or without die by using different toolpath strategies and die sets. At the end of the study, Results have been investigated under the influence of method and parameters used.Keywords: Template incremental sheet metal, Metal forming

Crystal Plasticity Finite Element Analysis of Loading-Unloading Behaviour in Magnesium Alloy Sheet

International Nuclear Information System (INIS)

Hama, Takayuki; Fujimoto, Hitoshi; Takuda, Hirohiko

2010-01-01

Magnesium alloy sheets exhibit strong inelastic response during unloading. In this study crystal plasticity finite element analysis of loading-unloading behaviour during uniaxial tension in a rolled magnesium alloy sheet was carried out, and the mechanism of this inelastic response was examined in detail in terms of macroscopic and mesoscopic deformations. The unloading behaviour obtained by the simulation was in good agreement with the experiment in terms of variation with stress of instantaneous tangent modulus during unloading. Variations of activities of each family of slip systems during the deformation showed that the activation of basal slip systems is the largest during unloading, and the slip direction during unloading is opposite from during loading. These results indicated that one of the factors of the inelastic behaviour during unloading is the fact that the basal slip systems are easily activated during unloading because of their low strengths.

Geometry of thin liquid sheet flows

Science.gov (United States)

Chubb, Donald L.; Calfo, Frederick D.; Mcconley, Marc W.; Mcmaster, Matthew S.; Afjeh, Abdollah A.

1994-01-01

Incompresible, thin sheet flows have been of research interest for many years. Those studies were mainly concerned with the stability of the flow in a surrounding gas. Squire was the first to carry out a linear, invicid stability analysis of sheet flow in air and compare the results with experiment. Dombrowski and Fraser did an experimental study of the disintegration of sheet flows using several viscous liquids. They also detected the formulation of holes in their sheet flows. Hagerty and Shea carried out an inviscid stability analysis and calculated growth rates with experimental values. They compared their calculated growth rates with experimental values. Taylor studied extensively the stability of thin liquid sheets both theoretically and experimentally. He showed that thin sheets in a vacuum are stable. Brown experimentally investigated thin liquid sheet flows as a method of application of thin films. Clark and Dumbrowski carried out second-order stability analysis for invicid sheet flows. Lin introduced viscosity into the linear stability analysis of thin sheet flows in a vacuum. Mansour and Chigier conducted an experimental study of the breakup of a sheet flow surrounded by high-speed air. Lin et al. did a linear stability analysis that included viscosity and a surrounding gas. Rangel and Sirignano carried out both a linear and nonlinear invisid stability analysis that applies for any density ratio between the sheet liquid and the surrounding gas. Now there is renewed interest in sheet flows because of their possible application as low mass radiating surfaces. The objective of this study is to investigate the fluid dynamics of sheet flows that are of interest for a space radiator system. Analytical expressions that govern the sheet geometry are compared with experimental results. Since a space radiator will operate in a vacuum, the analysis does not include any drag force on the sheet flow.

The long or short of it: Determinants of foreign currency exposure in external balance sheets

OpenAIRE

LANE, PHILIP RICHARD

2009-01-01

Recently, there have been numerous advances in modelling optimal international portfolio allocations in macroeconomic models. A major focus of this literature has been on the role of currency movements in determining portfolio returns that may hedge various macroeconomic shocks. However, there is little empirical evidence on the foreign currency exposures that are embedded in international balance sheets. Using a new database, we provide stylized facts concerning the cross-country and time-se...

The Long or Short of it: Determinants of Foreign Currency Exposure in External Balance Sheets

OpenAIRE

Lane, Philip R.; Shambaugh, Jay C

2008-01-01

Recently, there have been numerous advances in modelling optimal international portfolio allocations in macroeconomic models. A major focus of this literature has been on the role of currency movements in determining portfolio returns that may hedge various macroeconomic shocks. However, there is little empirical evidence on the foreign currency exposures that are embedded in international balance sheets. Using a new database, we provide stylized facts concerning the cross-country and time-se...

California Institute for Water Resources - California Institute for Water

Science.gov (United States)

Resources Skip to Content Menu California Institute for Water Resources Share Print Site Map Resources Publications Keep in Touch QUICK LINKS Our Blog: The Confluence Drought & Water Information University of California California Institute for Water Resources California Institute for Water Resources

Issue 7: Museum Attendance, Population Shifts, and Changing Tastes

OpenAIRE

Haselhoff, Kim; Ong, Paul M.

2005-01-01

SCS Fact Sheet no. 7 looks at the extent to which Southern California residents attend art and cultural museums. The findings are consistent with other studies, which have found differences in museum attendance based on ethnic and socioeconomic characteristics. We also found similarities in the general rate of museum attendance in the region over the past twenty years, as well as some changes in attendance rates among groups over the past two decades.

Variation simulation for compliant sheet metal assemblies with applications

Science.gov (United States)

Long, Yufeng

Sheet metals are widely used in discrete products, such as automobiles, aircraft, furniture and electronics appliances, due to their good manufacturability and low cost. A typical automotive body assembly consists of more than 300 parts welded together in more than 200 assembly fixture stations. Such an assembly system is usually quite complex, and takes a long time to develop. As the automotive customer demands products of increasing quality in a shorter time, engineers in automotive industry turn to computer-aided engineering (CAE) tools for help. Computers are an invaluable resource for engineers, not only to simplify and automate the design process, but also to share design specifications with manufacturing groups so that production systems can be tooled up quickly and efficiently. Therefore, it is beneficial to develop computerized simulation and evaluation tools for development of automotive body assembly systems. It is a well-known fact that assembly architectures (joints, fixtures, and assembly lines) have a profound impact on dimensional quality of compliant sheet metal assemblies. To evaluate sheet metal assembly architectures, a special dimensional analysis tool need be developed for predicting dimensional variation of the assembly. Then, the corresponding systematic tools can be established to help engineers select the assembly architectures. In this dissertation, a unified variation model is developed to predict variation in compliant sheet metal assemblies by considering fixture-induced rigid-body motion, deformation and springback. Based on the unified variation model, variation propagation models in multiple assembly stations with various configurations are established. To evaluate the dimensional capability of assembly architectures, quantitative indices are proposed based on the sensitivity matrix, which are independent of the variation level of the process. Examples are given to demonstrate their applications in selecting robust assembly

Someday I May Want to Know about...Leisure and Recreational Activities for Children and Adults with Mental Retardation. A MCARC Information Sheet.

Science.gov (United States)

Montgomery County Association for Retarded Citizens, Rockville, MD.

The fact sheet considers the importance of recreation and leisure time activities for people with mental retardation. A case is made for mainstreamed services, and suggestions are offered for families seeking to procure successful mainstreamed experiences in community recreational programs. Among suggestions are adapting family games to the…

Carbon sheet pumping

International Nuclear Information System (INIS)

Ohyabu, N.; Sagara, A.; Kawamura, T.; Motojima, O.; Ono, T.

1993-07-01

A new hydrogen pumping scheme has been proposed which controls recycling of the particles for significant improvement of the energy confinement in toroidal magnetic fusion devices. In this scheme, a part of the vacuum vessel surface near the divertor is covered with carbon sheets of a large surface area. Before discharge initiation, the sheets are baked up to 700 ∼ 1000degC to remove the previously trapped hydrogen atoms. After being cooled down to below ∼ 200degC, the unsaturated carbon sheets trap high energy charge exchange hydrogen atoms effectively during a discharge and overall pumping efficiency can be as high as ∼ 50 %. (author)

FDTD modeling of thin impedance sheets

Science.gov (United States)

Luebbers, Raymond J.; Kunz, Karl S.

1991-01-01

Thin sheets of resistive or dielectric material are commonly encountered in radar cross section calculations. Analysis of such sheets is simplified by using sheet impedances. In this paper it is shown that sheet impedances can be modeled easily and accurately using Finite Difference Time Domain (FDTD) methods.

California Bioregions

Data.gov (United States)

California Natural Resource Agency — California regions developed by the Inter-agency Natural Areas Coordinating Committee (INACC) were digitized from a 1:1,200,000 California Department of Fish and...

Plasma dynamics in current sheets

International Nuclear Information System (INIS)

Bogdanov, S.Yu.; Drejden, G.V.; Kirij, N.P.; AN SSSR, Leningrad

1992-01-01

Plasma dynamics in successive stages of current sheet evolution is investigated on the base of analysis of time-spatial variations of electron density and electrodynamic force fields. Current sheet formation is realized in a two-dimensional magnetic field with zero line under the action of relatively small initial disturbances (linear regimes). It is established that in the limits of the formed sheet is concentrated dense (N e ∼= 10 16 cm -3 ) (T i ≥ 100 eV, bar-Z i ≥ 2) hot pressure of which is balanced by the magnetic action of electrodynamic forces is carried out both plasma compression in the sheet limits and the acceleration along the sheet surface from a middle to narrow side edges

Drug Facts

Medline Plus

Full Text Available ... to main content Easy-to-Read Drug Facts Search form Search Menu Home Drugs That People Abuse Alcohol Facts ... Past Drug Use Prevention Phone Numbers and Websites Search Share Listen English Español Information about this page ...

46 CFR 232.4 - Balance sheet accounts.

Science.gov (United States)

2010-10-01

... 46 Shipping 8 2010-10-01 2010-10-01 false Balance sheet accounts. 232.4 Section 232.4 Shipping... ACTIVITIES UNIFORM FINANCIAL REPORTING REQUIREMENTS Balance Sheet § 232.4 Balance sheet accounts. (a.... (b) Purpose of balance sheet accounts. The balance sheet accounts are intended to disclose the...

Global ice sheet modeling

International Nuclear Information System (INIS)

Hughes, T.J.; Fastook, J.L.

1994-05-01

The University of Maine conducted this study for Pacific Northwest Laboratory (PNL) as part of a global climate modeling task for site characterization of the potential nuclear waste respository site at Yucca Mountain, NV. The purpose of the study was to develop a global ice sheet dynamics model that will forecast the three-dimensional configuration of global ice sheets for specific climate change scenarios. The objective of the third (final) year of the work was to produce ice sheet data for glaciation scenarios covering the next 100,000 years. This was accomplished using both the map-plane and flowband solutions of our time-dependent, finite-element gridpoint model. The theory and equations used to develop the ice sheet models are presented. Three future scenarios were simulated by the model and results are discussed

Sheet production apparatus for removing a crystalline sheet from the surface of a melt using gas jets located above and below the crystalline sheet

Energy Technology Data Exchange (ETDEWEB)

Kellerman, Peter L.; Thronson, Gregory D.

2017-06-14

In one embodiment, a sheet production apparatus comprises a vessel configured to hold a melt of a material. A cooling plate is disposed proximate the melt and is configured to form a sheet of the material on the melt. A first gas jet is configured to direct a gas toward an edge of the vessel. A sheet of a material is translated horizontally on a surface of the melt and the sheet is removed from the melt. The first gas jet may be directed at the meniscus and may stabilize this meniscus or increase local pressure within the meniscus.

The Topology and Properties of Mercury's Tail Current Sheet

Science.gov (United States)

Al Asad, M.; Johnson, C.; Philpott, L. C.

2017-12-01

current sheet, we observed that many TCS crossings exhibit the magnetic characteristics of a bifurcated current sheet rather than a typical Harris-type structure. In fact, we found that more TCS encounters can be classified as bifurcated (34%) than Harris-like (15%). This suggests the bifurcated TCS structure may be more stable and common in Mercury's magnetosphere than at Earth.

On the linear stability of sheared and magnetized jets without current sheets - relativistic case

Science.gov (United States)

Kim, Jinho; Balsara, Dinshaw S.; Lyutikov, Maxim; Komissarov, Serguei S.

2018-03-01

In our prior series of papers, we studied the non-relativistic and relativistic linear stability analysis of magnetized jets that do not have current sheets. In this paper, we extend our analysis to relativistic jets with a velocity shear and a similar current sheet free structure. The jets that we study are realistic because we include a velocity shear, a current sheet free magnetic structure, a relativistic velocity and a realistic thermal pressure so as to achieve overall pressure balance in the unperturbed jet. In order to parametrize the velocity shear, we apply a parabolic profile to the jets' 4-velocity. We find that the velocity shear significantly improves the stability of relativistic magnetized jets. This fact is completely consistent with our prior stability analysis of non-relativistic, sheared jets. The velocity shear mainly plays a role in stabilizing the short wavelength unstable modes for the pinch as well as the kink instability modes. In addition, it also stabilizes the long wavelength fundamental pinch instability mode. We also visualize the pressure fluctuations of each unstable mode to provide a better physical understanding of the enhanced stabilization by the velocity shear. Our overall conclusion is that combining velocity shear with a strong and realistic magnetic field makes relativistic jets even more stable.

How Much Do You Know about Teen Sexual Behavior? A True-False Quiz. Fact Sheet. Publication 2008-31

Science.gov (United States)

Holcombe, Emily; Peterson, Kristen; Manlove, Jennifer

2008-01-01

Despite media attention to teen sexual behavior and public concern about its consequences, the public is surprisingly ill-informed or misinformed on the subject. Yet without the facts, it is difficult to develop effective approaches to curb risky sexual behaviors and prevent teen pregnancy and STI transmission. This paper presents a true or false…

The Story of California = La Historia de California.

Science.gov (United States)

Bartel, Nick

"The Story of California" is a history and geography of the state of California, intended for classroom use by limited-English-proficient, native Spanish-speaking students in California's urban middle schools. The book is designed with the left page in English and the right page in Spanish to facilitate student transition into…

Dynamics of Radially Expanding Liquid Sheets

Science.gov (United States)

Majumdar, Nayanika; Tirumkudulu, Mahesh S.

2018-04-01

The process of atomization often involves ejecting thin liquid sheets at high speeds from a nozzle that causes the sheet to flap violently and break up into fine droplets. The flapping of the liquid sheet has long been attributed to the sheet's interaction with the surrounding gas phase. Here, we present experimental evidence to the contrary and show that the flapping is caused by the thinning of the liquid sheet as it spreads out from the nozzle exit. The measured growth rates of the waves agree remarkably well with the predictions of a recent theory that accounts for the sheet's thinning but ignores aerodynamic interactions. We anticipate these results to not only lead to more accurate predictions of the final drop-size distribution but also enable more efficient designs of atomizers.

Graphene oxide sheets-based platform for induced pluripotent stem cells culture: toxicity, adherence, growth and application

Science.gov (United States)

Durán, Marcela; Andrade, Patricia F.; Durán, Nelson; Luzo, Angela C. M.; Fávaro, Wagner J.

2015-05-01

It was prepared the graphene oxide (GO) sheets by suspension of GO in ultrapure deionized water or in Pluronic F-68 using a ultrasonicator bath. Total characterization of GO sheets was carried out. The results on suspension of GO in water showed excellent growth and cell adhesion. GO/Pluronic F-68 platform for the growth and adhesion of adipose-derived stem cells (ASCs) that exhibits excellent properties for these processes. GO in water suspension exhibited an inhibition of the cell growth over 5 μg/mL In vivo study with GO suspended in water (100 μg/mL) on Fisher 344 rats via i.p. administration showed low toxicity. Despite GO particle accumulates in the intraperitoneal cavity, this fact did not interfere with the final absorption of GO. The AST (aspartate aminotransferase) and ALT (alanine aminotransferase) levels (liver function) did not differ statistically in all experimental groups. Also, creatinine and urea levels (renal function) did not differ statistically in all experimental groups. Taking together, the data suggest the great potential of graphene oxide sheets as platform to ACSs, as well as, new material for treatment several urological diseases.

Buckling and stretching of thin viscous sheets

Science.gov (United States)

O'Kiely, Doireann; Breward, Chris; Griffiths, Ian; Howell, Peter; Lange, Ulrich

2016-11-01

Thin glass sheets are used in smartphone, battery and semiconductor technology, and may be manufactured by producing a relatively thick glass slab and subsequently redrawing it to a required thickness. The resulting sheets commonly possess undesired centerline ripples and thick edges. We present a mathematical model in which a viscous sheet undergoes redraw in the direction of gravity, and show that, in a sufficiently strong gravitational field, buckling is driven by compression in a region near the bottom of the sheet, and limited by viscous resistance to stretching of the sheet. We use asymptotic analysis in the thin-sheet, low-Reynolds-number limit to determine the centerline profile and growth rate of such a viscous sheet.

Ohm's law for a current sheet

Science.gov (United States)

Lyons, L. R.; Speiser, T. W.

1985-01-01

The paper derives an Ohm's law for single-particle motion in a current sheet, where the magnetic field reverses in direction across the sheet. The result is considerably different from the resistive Ohm's law often used in MHD studies of the geomagnetic tail. Single-particle analysis is extended to obtain a self-consistency relation for a current sheet which agrees with previous results. The results are applicable to the concept of reconnection in that the electric field parallel to the current is obtained for a one-dimensional current sheet with constant normal magnetic field. Dissipated energy goes directly into accelerating particles within the current sheet.

Evolutionary diversification of cryophilic Grylloblatta species (Grylloblattodea: Grylloblattidae in alpine habitats of California

Directory of Open Access Journals (Sweden)

Roderick George K

2010-06-01

Full Text Available Abstract Background Climate in alpine habitats has undergone extreme variation during Pliocene and Pleistocene epochs, resulting in repeated expansion and contraction of alpine glaciers. Many cold-adapted alpine species have responded to these climatic changes with long-distance range shifts. These species typically exhibit shallow genetic differentiation over a large geographical area. In contrast, poorly dispersing organisms often form species complexes within mountain ranges, such as the California endemic ice-crawlers (Grylloblattodea: Grylloblattidae: Grylloblatta. The diversification pattern of poorly dispersing species might provide more information on the localized effects of historical climate change, the importance of particular climatic events, as well as the history of dispersal. Here we use multi-locus genetic data to examine the phylogenetic relationships and geographic pattern of diversification in California Grylloblatta. Results Our analysis reveals a pattern of deep genetic subdivision among geographically isolated populations of Grylloblatta in California. Alpine populations diverged from low elevation populations and subsequently diversified. Using a Bayesian relaxed clock model and both uncalibrated and calibrated measurements of time to most recent common ancestor, we reconstruct the temporal diversification of alpine Grylloblatta populations. Based on calibrated relaxed clock estimates, evolutionary diversification of Grylloblatta occurred during the Pliocene-Pleistocene epochs, with an initial dispersal into California during the Pliocene and species diversification in alpine clades during the middle Pleistocene epoch. Conclusions Grylloblatta species exhibit a high degree of genetic subdivision in California with well defined geographic structure. Distinct glacial refugia can be inferred within the Sierra Nevada, corresponding to major, glaciated drainage basins. Low elevation populations are sister to alpine populations

Adjustable focus laser sheet module for generating constant maximum width sheets for use in optical flow diagnostics

International Nuclear Information System (INIS)

Hult, J; Mayer, S

2011-01-01

A general design of a laser light sheet module with adjustable focus is presented, where the maximum sheet width is preserved over a fixed region. In contrast, conventional focusing designs are associated with a variation in maximum sheet width with focal position. A four lens design is proposed here, where the first three lenses are employed for focusing, and the last for sheet expansion. A maximum sheet width of 1100 µm was maintained over a 50 mm long distance, for focal distances ranging from 75 to 500 mm, when a 532 nm laser beam with a beam quality factor M 2 = 29 was used for illumination

Collisionless current sheet equilibria

Science.gov (United States)

Neukirch, T.; Wilson, F.; Allanson, O.

2018-01-01

Current sheets are important for the structure and dynamics of many plasma systems. In space and astrophysical plasmas they play a crucial role in activity processes, for example by facilitating the release of magnetic energy via processes such as magnetic reconnection. In this contribution we will focus on collisionless plasma systems. A sensible first step in any investigation of physical processes involving current sheets is to find appropriate equilibrium solutions. The theory of collisionless plasma equilibria is well established, but over the past few years there has been a renewed interest in finding equilibrium distribution functions for collisionless current sheets with particular properties, for example for cases where the current density is parallel to the magnetic field (force-free current sheets). This interest is due to a combination of scientific curiosity and potential applications to space and astrophysical plasmas. In this paper we will give an overview of some of the recent developments, discuss their potential applications and address a number of open questions.

Renewable Energy Policy Fact sheet - Cyprus

International Nuclear Information System (INIS)

2017-07-01

The EurObserv'ER policy profiles give a snapshot of the renewable energy policy in the EU Member States. Electricity from renewable sources is promoted through investment subsidies in combination with a net metering scheme. Renewable heating and cooling is promoted by investment subsidies to enterprises and households respectively. To date, no incentives for production and use of bio-fuels in the transport sector are in place

CASIS Fact Sheet: Hardware and Facilities

Science.gov (United States)

Solomon, Michael R.; Romero, Vergel

2016-01-01

Vencore is a proven information solutions, engineering, and analytics company that helps our customers solve their most complex challenges. For more than 40 years, we have designed, developed and delivered mission-critical solutions as our customers' trusted partner. The Engineering Services Contract, or ESC, provides engineering and design services to the NASA organizations engaged in development of new technologies at the Kennedy Space Center. Vencore is the ESC prime contractor, with teammates that include Stinger Ghaffarian Technologies, Sierra Lobo, Nelson Engineering, EASi, and Craig Technologies. The Vencore team designs and develops systems and equipment to be used for the processing of space launch vehicles, spacecraft, and payloads. We perform flight systems engineering for spaceflight hardware and software; develop technologies that serve NASA's mission requirements and operations needs for the future. Our Flight Payload Support (FPS) team at Kennedy Space Center (KSC) provides engineering, development, and certification services as well as payload integration and management services to NASA and commercial customers. Our main objective is to assist principal investigators (PIs) integrate their science experiments into payload hardware for research aboard the International Space Station (ISS), commercial spacecraft, suborbital vehicles, parabolic flight aircrafts, and ground-based studies. Vencore's FPS team is AS9100 certified and a recognized implementation partner for the Center for Advancement of Science in Space (CASIS

National Clean Fleets Partnership (Fact Sheet)

Energy Technology Data Exchange (ETDEWEB)

None, None

2014-01-01

Clean Cities' National Clean Fleets Partnership establishes strategic alliances with large fleets to help them explore and adopt alternative fuels and fuel economy measures to cut petroleum use. The initiative leverages the strength of nearly 100 Clean Cities coalitions, nearly 18,000 stakeholders, and more than 20 years of experience. It provides fleets with top-level support, technical assistance, robust tools and resources, and public acknowledgement to help meet and celebrate fleets' petroleum-use reductions.

National Clean Fleets Partnership (Fact Sheet)

Energy Technology Data Exchange (ETDEWEB)

2012-01-01

Provides an overview of Clean Cities National Clean Fleets Partnership (NCFP). The NCFP is open to large private-sector companies that have fleet operations in multiple states. Companies that join the partnership receive customized assistance to reduce petroleum use through increased efficiency and use of alternative fuels. This initiative provides fleets with specialized resources, expertise, and support to successfully incorporate alternative fuels and fuel-saving measures into their operations. The National Clean Fleets Partnership builds on the established success of DOE's Clean Cities program, which reduces petroleum consumption at the community level through a nationwide network of coalitions that work with local stakeholders. Developed with input from fleet managers, industry representatives, and Clean Cities coordinators, the National Clean Fleets Partnership goes one step further by working with large private-sector fleets.

The Marfan Syndrome [and] Fact Sheet.

Science.gov (United States)

Pyeritz, Reed E.; Conant, Julia

This introduction to the Marfan syndrome, a heritable disorder of connective tissue primarily affecting the bones and ligaments, eyes, cardiovascular system, and lungs, is intended for a general audience. The question-and-answer format was chosen by individuals with the syndrome to reflect their major questions and concerns. It incorporates the…

Norwegian Petroleum Activity 97. Fact Sheet

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

This report is the official governmental review of the offshore operations on the Norwegian Continental Shelf in 1996. It covers the following topics: (1) Summary, (2) Historical overview, (3) State organization of petroleum activities, (4) The economic impact of Norwegian oil and gas, (5) State revenues, (6) Mainland activities, (7) Petroleum resources, (8) Production, (9) Marketing situation for petroleum products, (10) Environmental aspects, (11) The legal and license framework, (12) Licensing rounds, (13) Exploration, (14) Fields in production, (15) Fields under development, (16) Discoveries with development plan under consideration, (17) Transportation systems, (18) License interests, (19) Company interests, (20) White papers, (21) Useful postal addresses. 24 figs., 16 tabs.

Powering Our Sustainable Future (Fact Sheet)

Energy Technology Data Exchange (ETDEWEB)

2014-07-01

One of the Energy Department's most successful outreach efforts, the Solar Decathlon provides sponsors with rich opportunities for recognition - from naming rights to signage and speaking opportunities to special events. Support from the business community is crucial to the success of the competition and the experience of thousands of student decathletes. This sponsorship brochure reveals reasons why sponsors support the U.S. Department of Energy Solar Decathlon and how organizations can become involved as Solar Decathlon sponsors.

Renewable Energy Policy Fact sheet - Croatia

International Nuclear Information System (INIS)

2017-07-01

The EurObserv'ER policy profiles give a snapshot of the renewable energy policy in the EU Member States. Electricity from renewable sources is promoted through a premium tariff (and a guaranteed feed-in tariff for installations of less than 30 kW), allocated through tenders. Soft loans and subsidies for renewable energy projects are also provided. Renewable energy sources for heating purposes only are not promoted through a national support scheme. A training programme for RES installers aims at promoting the development, installation and usage of power generating and heating installations based on renewables. The main promotion scheme in the field of renewable transport fuels is a bio-fuels quota scheme. Additionally, the state provides bio-fuels incentives taking the form of a tax credits mechanism

Part D Reconsideration Appeals Fact Sheets

Data.gov (United States)

U.S. Department of Health & Human Services — If a Part D plan sponsor issues an adverse redetermination decision, the enrollee or the enrollees representative may appeal the decision to the Independent Review...

Renewable Energy Policy Fact sheet - Luxembourg

International Nuclear Information System (INIS)

2017-09-01

The EurObserv'ER policy profiles give a snapshot of the renewable energy policy in the EU Member States. Main support instruments for incentivising electricity from renewable energy sources are feed-in tariffs and feed-in premiums. A subsidy instrument is used as well. Households operating small solar installations are entitled to tax benefits. Renewable heat production is promoted through four subsidy instruments. Renewable transport fuels are promoted by way of a bio-fuels blending quota scheme

Renewable Energy Policy Fact sheet - Lithuania

International Nuclear Information System (INIS)

2017-09-01

The EurObserv'ER policy profiles give a snapshot of the renewable energy policy in the EU Member States. The main support scheme to stimulate electricity from renewable energy sources is a feed-in premium scheme. RES-E project developers with installations = 10 kW have to acquire access to this scheme by submitting successful bids in tenders. Subsidies and loans can be obtained by RES-E project developers through successful applications at the Climate Change Special Programme or the Lithuanian Environmental Investment Funds (investment subsidies only). RES-E plants are exempted from excise duty. Consumers with a small PV installation can benefit from net metering. Producers of heating and cooling from renewable energy sources are exempt from environmental pollution tax and are eligible for grants. Moreover, heat suppliers are obliged to purchase all heat produced from renewable energy sources. Renewable transport fuels are promoted through reimbursement of raw materials for bio-fuel production, a bio-fuels (blending) quota scheme as well as exemption from excise tax and environmental pollution tax

Fact Sheets & Publications | Efficient Windows Collaborative

Science.gov (United States)

Foundry Foundry New Construction Windows Window Selection Tool Selection Process Design Guidance Installation Replacement Windows Window Selection Tool Assessing Options Selection Process Design Guidance Installation Understanding Windows Benefits Design Considerations Measuring Performance Performance Standards

State Fact Sheets | Efficient Windows Collaborative

Science.gov (United States)

Foundry Foundry New Construction Windows Window Selection Tool Selection Process Design Guidance Installation Replacement Windows Window Selection Tool Assessing Options Selection Process Design Guidance Installation Understanding Windows Benefits Design Considerations Measuring Performance Performance Standards

Renewable Energy Policy Fact sheet - Germany

International Nuclear Information System (INIS)

2017-07-01

The EurObserv'ER policy profiles give a snapshot of the renewable energy policy in the EU Member States. Main support scheme in Germany: tendering scheme for RES-E, small power plants up to 100 kW are supported by a feed-in tariff. Market Incentive Programme (MAP) for RES-H, Electric Mobility Strategy for the transport sector

Renewable Energy Policy Fact sheet - Slovakia

International Nuclear Information System (INIS)

2017-09-01

The EurObserv'ER policy profiles give a snapshot of the renewable energy policy in the EU Member States. The main support scheme for electricity from renewable energy sources is a feed-in tariff scheme. For operators of photovoltaics (PV) and onshore wind installations an investment subsidy instrument is available as well. Besides, the sale of generated renewable electricity is incentivized by an exemption from excise duty. Also renewable heat production installations are eligible for an investment subsidy instrument. For renewable transport fuels a bio-fuels quota scheme is on place. Moreover, producers/suppliers of bio-fuels and petroleum fuels blended with bio-fuels benefit from a fiscal incentive

Renewable Energy Policy Fact sheet - Greece

International Nuclear Information System (INIS)

2017-07-01

The EurObserv'ER policy profiles give a snapshot of the renewable energy policy in the EU Member States. In Greece, electricity from renewable sources is promoted through feed-in premiums, granted through tenders (as from 2017), feed-in tariffs for limited cases, a preferential tax regime (since 2016) and a net metering scheme. Heating and cooling from renewable energy sources is incentivised by way of a preferential tax regime and an investment subsidy scheme. The main instrument for renewable energy use in transport is a bio-fuels quota scheme

Renewable Energy Policy Fact sheet - Portugal

International Nuclear Information System (INIS)

2017-07-01

The EurObserv'ER policy profiles give a snapshot of the renewable energy policy in the EU Member States. In Portugal, electricity from renewable sources from existing plants is mainly promoted through a feed-in tariff. Support to new RES plants can currently only be remunerated through the open energy market. For RES-H there is currently no direct support mechanism or fiscal benefit in place (as of January 2017); only indirect support. In the transport sector, the main incentives are a bio-fuel quota system and a tax exemption to small producers of bio-fuels

Renewable Energy Policy Fact sheet - Bulgaria

International Nuclear Information System (INIS)

2017-07-01

The EurObserv'ER policy profiles give a snapshot of the renewable energy policy in the EU Member States. Main support policy: Renewable electricity in Bulgaria is promoted primarily through a feed-in tariff scheme. For new projects this scheme is only open for installations up to 30 kW. The grid operator is mandated to the purchase and dispatch electricity at a guaranteed price for eligible generators. The use of renewable energy for heating and cooling is promoted through a subsidy from the European Regional Development Fund and through an exemption for building owners from property tax. Main Bulgarian support scheme for renewable energy in transport is a quota system. There is a professional training programme for RES-installers as well as a building obligation for the use of renewable heating and for the exemplary role of public authorities

Renewable Energy Policy Fact sheet - Hungary

International Nuclear Information System (INIS)

2017-07-01

The EurObserv'ER policy profiles give a snapshot of the renewable energy policy in the EU Member States. In Hungary, electricity from renewable energy sources is supported by a feed-in-tariff or a market ('green') premium, depending on the capacity and energy source. Household-sized power plants up to 50 kVA can benefit from net metering. In general, subsidy programmes also promote the use of renewable energy sources in the electricity and heating sector. The main support scheme for the use of renewable energy in the transportation sector is a quota system supplemented by a reimbursement of excise duty

Renewable Energy Policy Fact sheet - France

International Nuclear Information System (INIS)

2017-07-01

The EurObserv'ER policy profiles give a snapshot of the renewable energy policy in the EU Member States. Main support scheme: for RES-E a new support scheme based on a premium in addition to the market price is in place since 2016, whereby the generators sell their electricity directly in the market. For RES-H and C the Heat Fund support is the main tool for collective buildings. For individual housing, a tax credit is the main support scheme. The promotion of bio-fuels in France is mainly provided through fiscal regulation mechanisms. On the one hand, the lower competitiveness of bio-fuels compared to conventional fuels is improved through a partial exemption of the domestic consumption tax. On the other hand, the tax on polluting activities prescribes higher rates for companies trading fuel for consumption, in case they do not respect the national quota of bio-fuels to be blended within conventional fuels, which is defined for each fuel type

Fact Sheet 1999. Norwegian Petroleum Activity

Energy Technology Data Exchange (ETDEWEB)

Breivik, Jan

1999-10-01

As discussed in this publication, petroleum resources in the order of 9.5 billion (bn) standard cubic metres (scm) oil equivalents (oe) have been discovered on the Norwegian continental shelf (NCS), 77 per cent in the North Sea, 19 per cent in the Norwegian Sea and four per cent in the Barents Sea. By the end of 1998, remaining reserves on the NCS totalled 1.6 bn scm of oil, 1.2 bn scm oe gas and 160 mill scm oe of natural gas liquids. Thirty-two exploration wells, including 21 wildcats and 11 for appraisal, were completed or temporarily abandoned on the NCS in 1998. 939 exploration wells had been completed or temporarily abandoned off Norway. In 1998 governmental approval was given for the Huldra, Snorre B phase II, Gullfaks satellites phase II and Yme Beta West. Norwegian offshore petroleum production in 1998 totalled 222.5 scm oe, including 168.9 mill scm oe of oil, 43.6 mill scm oe of gas and 10 mill scm oe of NGL/condensate. Oil production declined by 4 per cent compared with 1997, while gas sales rose by 2 per cent. The estimated value of Norwegian petroleum exports in 1998 was NOK 123 bn, or about 30 per cent of the country`s total earnings from foreign sales. Petroleum production and pipeline transport accounted for 12 per cent of Norway`s gross national product. Net government revenues from taxes and royalties on petroleum operations is put at 27.6 billion NOK. The publication also includes a list of white papers and a list of useful postal addresses. 23 figs., 14 tabs.

Renewable Energy Policy Fact sheet - Belgium

International Nuclear Information System (INIS)

2017-09-01

The EurObserv'ER policy profiles give a snapshot of the renewable energy policy in the EU Member States. Belgium consists of three regions: Brussels, Flanders and Wallonia, each with much autonomy in determining renewable support policies, except for support to offshore wind and hydro power which fall under the competence of the federal government. Electricity from renewable sources is promoted at regional and federal levels mainly through a quota system based on the trade of certificates, complemented by regional support measures. In the three regions small PV installations benefit from net metering. The federal government supports renewable heating and cooling by way of a tax deduction on investment costs. The main support scheme for renewable energy sources used in transport is a quota system under the competence of the federal government

Renewable Energy Policy Fact sheet - Poland

International Nuclear Information System (INIS)

2017-09-01

The EurObserv'ER policy profiles give a snapshot of the renewable energy policy in the EU Member States. Mid-2016 Poland revamped its national support scheme for electricity from renewable energy sources, started to phase out a certificates-backed renewable electricity quota scheme, and put in place a feed-in tariff/feed-in premium (FiT/FiP) system in place with the support levels being determined by approved tender bids. Furthermore, a fiscal and soft loan instrument is used for supplementary support. Three subsidy instruments and a soft loan instrument are deployed for the promotion of renewable heat. Renewable energy in transport is promoted through a bio-fuels quota scheme

Renewable Energy Policy Fact sheet - Sweden

International Nuclear Information System (INIS)

2017-09-01

The EurObserv'ER policy profiles give a snapshot of the renewable energy policy in the EU Member States. Sweden surpassed its 2020 nationally binding renewable energy in 2013. Main support measures to promote renewable energy in Sweden consists of a quota system, various tax regulation mechanisms and subsidy schemes. Sweden has a joint support scheme with Norway, thus being the first EU Member State to implement a cooperation mechanism, as defined under the 2009 EU Renewable Energy Directive. The Swedish coalition government has agreed on a target of 100% renewable electricity production by 2040

Health Insurance Rate Review Fact Sheet

Data.gov (United States)

U.S. Department of Health & Human Services — The Affordable Care Act is bringing an unprecedented level of scrutiny and transparency to health insurance rate increases. The Act ensures that, in any State, any...

Renewable Energy Policy Fact sheet - Latvia

International Nuclear Information System (INIS)

2017-09-01

The EurObserv'ER policy profiles give a snapshot of the renewable energy policy in the EU Member States. Electricity from renewable sources of energy is stimulated by a feed-in tariff scheme which includes elements of a renewable quota scheme and tendering. Since 2011 this scheme only applies to pre-existing RES-E installations and is closed for new RES-E projects. Moreover, the present main RES-E support scheme is being evaluated which may result in reforms within short. Small-scale renewable generation, notably PV, is stimulated by net metering. On the other hand, since January 2014 a tax for subsidised electricity generators is in place. Renewable heating and cooling is promoted by fiscal instruments. To date, renewable transport fuels are promoted through a tax mechanism as well

Fact sheet on spent fuel management

International Nuclear Information System (INIS)

2006-01-01

The IAEA gives high priority to safe and effective spent fuel management. As an example of continuing efforts, the 2003 International Conference on Storage of Spent Fuel from Power Reactors gathered 125 participants from 35 member states to exchange information on this important subject. With its large number of Member States, the IAEA is well-positioned to gather and share information useful in addressing Member State priorities. IAEA activities on this topic include plans to produce technical documents as resources for a range of priority topics: spent fuel performance assessment and research, burnup credit applications, cask maintenance, cask loading optimization, long term storage requirements including records maintenance, economics, spent fuel treatment, remote technology, and influence of fuel design on spent fuel storage. In addition to broader topics, the IAEA supports coordinated research projects and technical cooperation projects focused on specific needs. The proceedings of the 2003 IAEA conference on storage of spent fuel from power reactors has been ranked in the top twenty most accessed IAEA publications. These proceedings are available for free downloads at http://www-pub.iaea.org/MTCD/publications/PubDetails.asp?pubId=6924]. The IAEA organized and held a 2004 meeting focused on long term spent fuel storage provisions in Central and Eastern Europe, using technical cooperation funds to support participation by these Member States. Over ninety percent of the participants in this meeting rated its value as good or excellent, with participants noting that the IAEA is having a positive effect in stimulating communication, cooperation, and information dissemination on this important topic. The IAEA was advised in 2004 that results from a recent coordinated research project (IAEA-TECDOC-1343) were used by one Member State to justify higher clad temperatures for spent fuel in dry storage, leading to more efficient storage and reduced costs. Long term storage of spent fuel is becoming a progressive reality. Feedback from Member States has reinforced IAEA plans to prioritize activities on gathering and disseminating information on the performance of fuels and materials in storage and burnup credit applications. The IAEA will continue to address global spent fuel data, technical considerations as storage durations extend, spent fuel treatment options, among others. Specific items include an international spent fuel conference in Vienna 19-23 June 2006, the Nuclear Fuel Cycle Information System (a computerized database designed to provide information on civilian nuclear fuel cycle facilities worldwide. This on-line system is frequently updated and accessible at http://www.iaea.org/OurWork/ST/NE/NEFW/nfcms_b4_03_NFCIS.html), on-going activities in spent fuel management which are listed and updated on the IAEA website. Further information on these activities can be accessed at http://www.iaea.org/worldatom/Programmes/Nuclear_Energy/NEFW/nfcms_b3.html

Fact sheet. Norwegian petroleum activity 1995

International Nuclear Information System (INIS)

Harv, M.R.

1995-02-01

This report on the Norwegian petroleum activity in 1994 is published by the Royal Ministry of Industry and Energy. Production to the end of 1994 totaled 1.63 billion scm oe. At 31 Dec 1994, total reserves on the Norwegian continental shelf comprised 1.34 billion scm oe of oil, 1.35 billion scm oe of gas and 0.1 billion scm oe of NGLs. The net increment in oil and gas during 1994 was about 115 million scm oe. Twenty-seven exploration wells, including 22 wildcats and five appraisal wells, were completed or temporarily abandoned on the Norwegian continental shelf in 1994. Governmental approval was given for developing the second phase of the Ekofisk field, the Vigdis and Snorre Lunde oil fields, and two smaller formations on the Veslefrikk field. Investment in petroleum operations totaled about NOK 50 billion. Norwegian oil and gas production came to about 180 million scm oe. At present levels of output, Norway's petroleum resources are sufficient to support production of oil for 20 years and of gas for 115 years. The estimated value of Norwegian petroleum exports in 1994 is NOK 114 billion, representing about 34% of the country's total export earnings. State revenues from taxes and royalties on petroleum operations came to about NOK 23.7 billion, or eight per cent of total government revenues. 24 figs., 13 tabs

Fact Sheet on the Earnings Gap.

Science.gov (United States)

Women's Bureau (DOL), Washington, DC.

A comparison of median income since 1955 shows that the salary differential between men and women has increased in recent years. Although this is due primarily to the over-representation of women in low-skilled, low-paying jobs, even within the same occupations men are better paid. Salary comparisons for professional occupations show differentials…

Renewable Energy Policy Fact sheet - Italy

International Nuclear Information System (INIS)

2017-07-01

The EurObserv'ER policy profiles give a snapshot of the renewable energy policy in the EU Member States. Italy approved the National Energy Strategy in 2013. It is built around 7 priorities and focusses on a sustainable deployment of renewable energy and stresses the importance of energy efficiency. The Strategy contains targets and measures until 2020 as well as long-term strategies until 2050. In 2013, the green certificate scheme was replaced by other support schemes to promote RES-E, namely different feed-in and premium tariffs. Very large plants are awarded contracts under a tender scheme (auction process). For RESH, there exists a tax regulation scheme and incentive for small RES-H sources. RES-T is promoted by quotas

Renewable Energy Policy Fact sheet - Romania

International Nuclear Information System (INIS)

2017-07-01

The EurObserv'ER policy profiles give a snapshot of the renewable energy policy in the EU Member States. The promotion of renewable electricity in Romania relies primarily on a renewable quota scheme. Since 2017 the scheme has been closed for new projects. Renewable heating and cooling is promoted through investment subsidies. Renewable energy sources in the transport sector are promoted by a bio-fuels quota scheme and indirectly through a subsidy scheme for the purchase of electric vehicles

Pelvic Inflammatory Disease (PID) Fact Sheet

Science.gov (United States)

... Home Page Bacterial Vaginosis (BV) Chlamydia Genital Herpes Gonorrhea Hepatitis HIV/AIDS & STDs Human Papillomavirus (HPV) Pelvic ... often caused by some STDs, like chlamydia and gonorrhea . Other infections that are not sexually transmitted can ...

Guillain-Barré Syndrome Fact Sheet

Science.gov (United States)

... benefit. In the process of plasma exchange, a plastic tube called a catheter is inserted into the ... a viral or bacterial infection suggests that certain characteristics of some viruses and bacteria may activate the ...

Solar Energy Technologies Office Fact Sheet

Energy Technology Data Exchange (ETDEWEB)

Solar Energy Technologies Office

2018-03-13

The U.S. Department of Energy Solar Energy Technologies Office (SETO) supports early-stage research and development to improve the affordability, reliability, and performance of solar technologies on the grid. The office invests in innovative research efforts that securely integrate more solar energy into the grid, enhance the use and storage of solar energy, and lower solar electricity costs.

Renewable Energy Policy Fact sheet - Slovenia

International Nuclear Information System (INIS)

2017-07-01

The EurObserv'ER policy profiles give a snapshot of the renewable energy policy in the EU Member States. In Slovenia, electricity from renewable sources is promoted through a feed-in tariff (so called 'guaranteed purchase') and a premium tariff (so called 'operating premium'), both granted through a tender procedure. Renewable energy sources for heating purposes are promoted mainly through loans on concessional terms and subsidies. The main incentive for renewable energy use in transport are tax exemptions and subsidies

Law Enforcement School Programs. Fact Sheet

Science.gov (United States)

Arkansas Safe Schools Initiative Division, 2010

2010-01-01

The school shooting incidents during the decade of the 1990's prompted an increase of law enforcement presence in schools. The School Violence Resource Center (SVRC) at the Criminal Justice Institute (CJI) University of Arkansas System undertook a project to determine what programs law enforcement agencies currently provide in their local schools…

Bioenergy Knowledge Discovery Framework Fact Sheet

Energy Technology Data Exchange (ETDEWEB)

None

2017-07-01

The Bioenergy Knowledge Discovery Framework (KDF) supports the development of a sustainable bioenergy industry by providing access to a variety of data sets, publications, and collaboration and mapping tools that support bioenergy research, analysis, and decision making. In the KDF, users can search for information, contribute data, and use the tools and map interface to synthesize, analyze, and visualize information in a spatially integrated manner.

Renewable Energy Policy Fact sheet - Denmark

International Nuclear Information System (INIS)

2017-09-01

The EurObserv'ER policy profiles give a snapshot of the renewable energy policy in the EU Member States. Denmark surpassed its 2020 nationally binding renewable energy in 2015. In March 2012 a new Energy Agreement was reached in Denmark. The Agreement contains a wide range of ambitious initiatives, which aims at bringing Denmark closer to the target of 100% renewable energy in the energy and transport sectors by 2050. Main support measures to promote renewable energy in Denmark consist of a feed-in premium scheme (combined with tenders for offshore wind), a quota system, tax regulation mechanisms and subsidy schemes

Renewable Energy Policy Fact sheet - Ireland

International Nuclear Information System (INIS)

2017-09-01

The EurObserv'ER policy profiles give a snapshot of the renewable energy policy in the EU Member States. With Ireland's current 'trajectory' of renewable energy growth, it is likely to slightly fall short of its 2020 nationally binding renewable energy target. Ireland initiated a 'moratorium' on its REFIT (Renewable Energy Feed-in Tariff) support scheme in December 2015, with the aim of introducing a revised scheme in 2017 in line with market developments. Grants and tax relief remain in place for renewable heat promotion. An Offshore Renewable Energy Development Plan (OREDP) was introduced in 2014, which sets out Government policy in relation to the sustainable development of Ireland's abundant offshore renewable energy resource

Renewable Energy Policy Fact sheet - Finland

International Nuclear Information System (INIS)

2017-09-01

The EurObserv'ER policy profiles give a snapshot of the renewable energy policy in the EU Member States. By 2014 Finland already surpassed its 2020 target for renewable energy use under the 2009 EU Renewable Energy Directive. The current feed-in premium system will be discontinued and is expected to be replaced with a competitive technology-neutral tendering scheme, in line with the requirements set in the 2014 State Aid guidelines

Renewable Energy Policy Fact sheet - Netherlands

International Nuclear Information System (INIS)

2017-07-01

The EurObserv'ER policy profiles give a snapshot of the renewable energy policy in the EU Member States. Main support scheme: sliding feed-in premium scheme which is used to promote RES based electricity, renewable gas and heating purposes is the SDE+ which is structured as feed-in premiums and financed through a levy on the energy bill of end consumers

Fact sheet. Norwegian petroleum activity 1996

Energy Technology Data Exchange (ETDEWEB)

Westgaard, T. [ed.

1996-02-01

The present report from the Royal Ministry of Industry and Energy deals with the Norwegian petroleum activity. Main topics are as follow: Historical overview; state organisation of petroleum activities; the economic impact of Norwegian oil and gas; state revenues; mainland activities; petroleum resources; production; marketing situation for petroleum products; environmental aspects; the legal and licence framework; licensing rounds; exploration; fields in production; fields under development; discoveries with development plan under consideration; transportation systems; licence interests; company interests. 36 refs., 24 figs., 15 tabs.

What Is Quality Preschool? Fact Sheet

Science.gov (United States)

Advocates for Children of New Jersey, 2010

2010-01-01

Children need quality early learning programs. This can be a child care center, a preschool or a Head Start program. Not all early learning programs provide the high quality children need. This paper presents questions that should be considered when looking for an early learning program.

Epilepsy. NICHCY Disability Fact Sheet #6

Science.gov (United States)

National Dissemination Center for Children with Disabilities, 2010

2010-01-01

Epilepsy is a seizure disorder. According to the Epilepsy Foundation of America, a seizure happens when a brief, strong surge of electrical activity affects part or all of the brain. About three million Americans have epilepsy. Of the 200,000 new cases diagnosed each year, nearly 45,000 are children and adolescents. Following a brief story of a…

Renewable Energy Policy Fact sheet - Estonia

International Nuclear Information System (INIS)

2017-09-01

The EurObserv'ER policy profiles give a snapshot of the renewable energy policy in the EU Member States. Electricity from renewable sources is mainly promoted through feed-in premiums (FiP). In addition, investment subsidies are available for biogas/biomass-based RES-E and wind power installations. Renewable heat is stimulated through investment subsidies to CHP plants generating renewable heat and electricity, as well as subsidies for private heat consumers. Renewable transport fuels are currently mainly incentivised by way of a support scheme to promote the purchase of electric cars that use power produced from renewable energy sources. Recently, a measure for supporting bio-methane in the transport sector has been adopted. Generally, a number of investment subsidy schemes are in place to promote the development, installation and use of renewable energy production installations. However, certain subsidy conditions still have to be announced and implemented. The total amount of financial support to be allocated to renewable energy and energy efficiency related projects during period 2014-2020 will be over euro 490 million. The current administratively determined FiP scheme is set to be replaced by an auction-based scheme within short

Renewable Energy Policy Fact sheet - Austria

International Nuclear Information System (INIS)

2017-07-01

The EurObserv'ER policy profiles give a snapshot of the renewable energy policy in the EU Member States. Main support scheme: sliding feed-in premium scheme, incentives for small scale solar thermal installations, heat pumps, geothermal and biomass heating plants, quota system in the transport sector

Renewable Energy Policy Fact sheet - Malta

International Nuclear Information System (INIS)

2017-09-01

The EurObserv'ER policy profiles give a snapshot of the renewable energy policy in the EU Member States. Malta's RES target for 2020 is 10%. By 2015, Malta had reached a RES share of 5%. Due to several major technology-related developments, Malta has revised the originally planned RES mix presented in its 2010 NREAP. Whilst offshore wind is no longer expected to contribute to reaching the target, installation of solar PV systems is given higher priority. Malta uses a combination of feed-in tariffs, grant schemes and a quota obligation on the share of bio-fuels delivered on the market to promote renewable energy sources

Renewable Energy Policy Fact sheet - Spain

International Nuclear Information System (INIS)

2017-07-01

The EurObserv'ER policy profiles give a snapshot of the renewable energy policy in the EU Member States. On October 2015, a new support scheme (the 'Regimen Retributivo Especifico') was established in Spain. The aim was to grant a specific remuneration regime for new biomass plants located in the mainland electricity system and for wind energy plants. The allocation of the referred specific remuneration regime has been done through a competitive call for tenders. A tax regulation mechanism for investments related to RESE plants is in place. There is a tax credit for solar thermal and for bio-fuels in transport. Furthermore a quota system for bio-fuels is in place. RES-E operators are entitled to grid connection, priority dispatch against the grid operator. Currently no support schemes for RES-H and C are in place in Spain

Polycystic Ovary Syndrome (PCOS) Fact Sheet

Science.gov (United States)

... federal government website managed by the Office on Women's Health in the Office of the Assistant Secretary for Health at the U.S. Department of Health and Human Services . 200 Independence Avenue, S.W., Washington, DC 20201 1-800-994- ...

17 CFR 210.6-04 - Balance sheets.

Science.gov (United States)

2010-04-01

... 17 Commodity and Securities Exchanges 2 2010-04-01 2010-04-01 false Balance sheets. 210.6-04... sheets. This rule is applicable to balance sheets filed by registered investment companies except for... of this part. Balance sheets filed under this rule shall comply with the following provisions: Assets...

Ice sheet in peril

DEFF Research Database (Denmark)

Hvidberg, Christine Schøtt

2016-01-01

Earth's large ice sheets in Greenland and Antarctica are major contributors to sea level change. At present, the Greenland Ice Sheet (see the photo) is losing mass in response to climate warming in Greenland (1), but the present changes also include a long-term response to past climate transitions...

The transposition of the balance sheet to financial and functional balance sheet. Research and development

Directory of Open Access Journals (Sweden)

Liana GĂDĂU

2015-09-01

Full Text Available As the title suggests, through this paper we want to highlight the necessity of treating again the content and the form of the balance sheet in order to adapt it to a more efficient analysis, this way surpassing the informational valences of the classic balance sheet. The functional and the financial balance sheet will be taken into account. These models of balance sheet permit the complex analyses regarding the solvability or the bankruptcy risk of an enterprise to take place, and also other analyses, like the analysis of the structure and the financial/ functional equilibrium, the analysis of the company on operating cycles and their role in the functioning of the company. Through the particularities offered by each of these two models of balance sheet, we want to present the advantages of a superior informing. This content of this material is based on a vast investigation of the specialized literature.

Ice_Sheets_CCI: Essential Climate Variables for the Greenland Ice Sheet

Science.gov (United States)

Forsberg, R.; Sørensen, L. S.; Khan, A.; Aas, C.; Evansberget, D.; Adalsteinsdottir, G.; Mottram, R.; Andersen, S. B.; Ahlstrøm, A.; Dall, J.; Kusk, A.; Merryman, J.; Hvidberg, C.; Khvorostovsky, K.; Nagler, T.; Rott, H.; Scharrer, M.; Shepard, A.; Ticconi, F.; Engdahl, M.

2012-04-01

As part of the ESA Climate Change Initiative (www.esa-cci.org) a long-term project "ice_sheets_cci" started January 1, 2012, in addition to the existing 11 projects already generating Essential Climate Variables (ECV) for the Global Climate Observing System (GCOS). The "ice_sheets_cci" goal is to generate a consistent, long-term and timely set of key climate parameters for the Greenland ice sheet, to maximize the impact of European satellite data on climate research, from missions such as ERS, Envisat and the future Sentinel satellites. The climate parameters to be provided, at first in a research context, and in the longer perspective by a routine production system, would be grids of Greenland ice sheet elevation changes from radar altimetry, ice velocity from repeat-pass SAR data, as well as time series of marine-terminating glacier calving front locations and grounding lines for floating-front glaciers. The ice_sheets_cci project will involve a broad interaction of the relevant cryosphere and climate communities, first through user consultations and specifications, and later in 2012 optional participation in "best" algorithm selection activities, where prototype climate parameter variables for selected regions and time frames will be produced and validated using an objective set of criteria ("Round-Robin intercomparison"). This comparative algorithm selection activity will be completely open, and we invite all interested scientific groups with relevant experience to participate. The results of the "Round Robin" exercise will form the algorithmic basis for the future ECV production system. First prototype results will be generated and validated by early 2014. The poster will show the planned outline of the project and some early prototype results.

AI applications in sheet metal forming

CERN Document Server

Hussein, Hussein

2017-01-01

This book comprises chapters on research work done around the globe in the area of artificial intelligence (AI) applications in sheet metal forming. The first chapter offers an introduction to various AI techniques and sheet metal forming, while subsequent chapters describe traditional procedures/methods used in various sheet metal forming processes, and focus on the automation of those processes by means of AI techniques, such as KBS, ANN, GA, CBR, etc. Feature recognition and the manufacturability assessment of sheet metal parts, process planning, strip-layout design, selecting the type and size of die components, die modeling, and predicting die life are some of the most important aspects of sheet metal work. Traditionally, these activities are highly experience-based, tedious and time consuming. In response, researchers in several countries have applied various AI techniques to automate these activities, which are covered in this book. This book will be useful for engineers working in sheet metal industri...

Effect of Temperature and Sheet Temper on Isothermal Solidification Kinetics in Clad Aluminum Brazing Sheet

Science.gov (United States)

Benoit, Michael J.; Whitney, Mark A.; Wells, Mary A.; Winkler, Sooky

2016-09-01

Isothermal solidification (IS) is a phenomenon observed in clad aluminum brazing sheets, wherein the amount of liquid clad metal is reduced by penetration of the liquid clad into the core. The objective of the current investigation is to quantify the rate of IS through the use of a previously derived parameter, the Interface Rate Constant (IRC). The effect of peak temperature and initial sheet temper on IS kinetics were investigated. The results demonstrated that IS is due to the diffusion of silicon (Si) from the liquid clad layer into the solid core. Reduced amounts of liquid clad at long liquid duration times, a roughened sheet surface, and differences in resolidified clad layer morphology between sheet tempers were observed. Increased IS kinetics were predicted at higher temperatures by an IRC model as well as by experimentally determined IRC values; however, the magnitudes of these values are not in good agreement due to deficiencies in the model when applied to alloys. IS kinetics were found to be higher for sheets in the fully annealed condition when compared with work-hardened sheets, due to the influence of core grain boundaries providing high diffusivity pathways for Si diffusion, resulting in more rapid liquid clad penetration.

Energy information sheets

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-07-01

The National Energy Information Center (NEIC), as part of its mission, provides energy information and referral assistance to Federal, State, and local governments, the academic community, business and industrial organizations, and the public. The Energy Information Sheets was developed to provide general information on various aspects of fuel production, prices, consumption, and capability. Additional information on related subject matter can be found in other Energy Information Administration (EIA) publications as referenced at the end of each sheet.

Experiments on sheet metal shearing

OpenAIRE

Gustafsson, Emil

2013-01-01

Within the sheet metal industry, different shear cutting technologies are commonly used in several processing steps, e.g. in cut to length lines, slitting lines, end cropping etc. Shearing has speed and cost advantages over competing cutting methods like laser and plasma cutting, but involves large forces on the equipment and large strains in the sheet material.Numerical models to predict forces and sheared edge geometry for different sheet metal grades and different shear parameter set-ups a...

California Political Districts

Data.gov (United States)

California Natural Resource Agency — This is a series of district layers pertaining to California'spolitical districts, that are derived from the California State Senateand State Assembly information....

Predicting Pulsar Scintillation from Refractive Plasma Sheets

Science.gov (United States)

Simard, Dana; Pen, Ue-Li

2018-05-01

The dynamic and secondary spectra of many pulsars show evidence for long-lived, aligned images of the pulsar that are stationary on a thin scattering sheet. One explanation for this phenomenon considers the effects of wave crests along sheets in the ionized interstellar medium, such as those due to Alfvén waves propagating along current sheets. If these sheets are closely aligned to our line-of-sight to the pulsar, high bending angles arise at the wave crests and a selection effect causes alignment of images produced at different crests, similar to grazing reflection off of a lake. Using geometric optics, we develop a simple parameterized model of these corrugated sheets that can be constrained with a single observation and that makes observable predictions for variations in the scintillation of the pulsar over time and frequency. This model reveals qualitative differences between lensing from overdense and underdense corrugated sheets: Only if the sheet is overdense compared to the surrounding interstellar medium can the lensed images be brighter than the line-of-sight image to the pulsar, and the faint lensed images are closer to the pulsar at higher frequencies if the sheet is underdense, but at lower frequencies if the sheet is overdense.

Energized Oxygen : Speiser Current Sheet Bifurcation

Science.gov (United States)

George, D. E.; Jahn, J. M.

2017-12-01

A single population of energized Oxygen (O+) is shown to produce a cross-tail bifurcated current sheet in 2.5D PIC simulations of the magnetotail without the influence of magnetic reconnection. Treatment of oxygen in simulations of space plasmas, specifically a magnetotail current sheet, has been limited to thermal energies despite observations of and mechanisms which explain energized ions. We performed simulations of a homogeneous oxygen background, that has been energized in a physically appropriate manner, to study the behavior of current sheets and magnetic reconnection, specifically their bifurcation. This work uses a 2.5D explicit Particle-In-a-Cell (PIC) code to investigate the dynamics of energized heavy ions as they stream Dawn-to-Dusk in the magnetotail current sheet. We present a simulation study dealing with the response of a current sheet system to energized oxygen ions. We establish a, well known and studied, 2-species GEM Challenge Harris current sheet as a starting point. This system is known to eventually evolve and produce magnetic reconnection upon thinning of the current sheet. We added a uniform distribution of thermal O+ to the background. This 3-species system is also known to eventually evolve and produce magnetic reconnection. We add one additional variable to the system by providing an initial duskward velocity to energize the O+. We also traced individual particle motion within the PIC simulation. Three main results are shown. First, energized dawn- dusk streaming ions are clearly seen to exhibit sustained Speiser motion. Second, a single population of heavy ions clearly produces a stable bifurcated current sheet. Third, magnetic reconnection is not required to produce the bifurcated current sheet. Finally a bifurcated current sheet is compatible with the Harris current sheet model. This work is the first step in a series of investigations aimed at studying the effects of energized heavy ions on magnetic reconnection. This work differs

Experimental formability analysis of bondal sandwich sheet

Science.gov (United States)

Kami, Abdolvahed; Banabic, Dorel

2018-05-01

Metal/polymer/metal sandwich sheets have recently attracted the interests of industries like automotive industry. These sandwich sheets have superior properties over single-layer metallic sheets including good sound and vibration damping and light weight. However, the formability of these sandwich sheets should be enhanced which requires more research. In this paper, the formability of Bondal sheet (DC06/viscoelastic polymer/DC06 sandwich sheet) was studied through different types of experiments. The mechanical properties of Bondal were determined by uniaxial tensile tests. Hemispherical punch stretching and hydraulic bulge tests were carried out to determine the forming limit diagram (FLD) of Bondal. Furthermore, cylindrical and square cup drawing tests were performed in dry and oil lubricated conditions. These tests were conducted at different blank holding forces (BHFs). An interesting observation about Bondal sheet deep drawing was obtaining of higher drawing depths at dry condition in comparison with oil-lubricated condition.

California Geothermal Forum: A Path to Increasing Geothermal Development in California

Energy Technology Data Exchange (ETDEWEB)

Young, Katherine R. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2017-01-01

The genesis of this report was a 2016 forum in Sacramento, California, titled 'California Geothermal Forum: A Path to Increasing Geothermal Development in California.' The forum was held at the California Energy Commission's (CEC) headquarters in Sacramento, California with the primary goal being to advance the dialogues for the U.S. Department of Energy's Geothermal Technologies Office (GTO) and CEC technical research and development (R&D) focuses for future consideration. The forum convened a diverse group of stakeholders from government, industry, and research to lay out pathways for new geothermal development in California while remaining consistent with critical Federal and State conservation planning efforts, particularly at the Salton Sea.

Private Schools, California, 2009, California Department of Education

Data.gov (United States)

U.S. Environmental Protection Agency — California law (California Education Code Section 33190) requires private schools offering or conducting a full-time elementary or secondary level day school for...

Disintegration of liquid sheets

Science.gov (United States)

Mansour, Adel; Chigier, Norman

1990-01-01

The development, stability, and disintegration of liquid sheets issuing from a two-dimensional air-assisted nozzle is studied. Detailed measurements of mean drop size and velocity are made using a phase Doppler particle analyzer. Without air flow the liquid sheet converges toward the axis as a result of surface tension forces. With airflow a quasi-two-dimensional expanding spray is formed. The air flow causes small variations in sheet thickness to develop into major disturbances with the result that disruption starts before the formation of the main break-up region. In the two-dimensional variable geometry air-blast atomizer, it is shown that the air flow is responsible for the formation of large, ordered, and small chaotic 'cell' structures.

Root-growth-inhibiting sheet

Science.gov (United States)

Burton, F.G.; Cataldo, D.A.; Cline, J.F.; Skiens, W.E.; Van Voris, P.

1993-01-26

In accordance with this invention, a porous sheet material is provided at intervals with bodies of a polymer which contain a 2,6-dinitroaniline. The sheet material is made porous to permit free passage of water. It may be either a perforated sheet or a woven or non-woven textile material. A particularly desirable embodiment is a non-woven fabric of non-biodegradable material. This type of material is known as a geotextile'' and is used for weed control, prevention of erosion on slopes, and other landscaping purposes. In order to obtain a root repelling property, a dinitroaniline is blended with a polymer which is attached to the geotextile or other porous material.

Root-growth-inhibiting sheet

Science.gov (United States)

Burton, Frederick G.; Cataldo, Dominic A.; Cline, John F.; Skiens, W. Eugene; Van Voris, Peter

1993-01-01

In accordance with this invention, a porous sheet material is provided at intervals with bodies of a polymer which contain a 2,6-dinitroaniline. The sheet material is made porous to permit free passage of water. It may be either a perforated sheet or a woven or non-woven textile material. A particularly desirable embodiment is a non-woven fabric of non-biodegradable material. This type of material is known as a "geotextile" and is used for weed control, prevention of erosion on slopes, and other landscaping purposes. In order to obtain a root repelling property, a dinitroaniline is blended with a polymer which is attached to the geotextile or other porous material.

Mobility Balance Sheet 2009

International Nuclear Information System (INIS)

Jorritsma, P.; Derriks, H.; Francke, J.; Gordijn, H.; Groot, W.; Harms, L.; Van der Loop, H.; Peer, S.; Savelberg, F.; Wouters, P.

2009-06-01

The Mobility Balance Sheet provides an overview of the state of the art of mobility in the Netherlands. In addition to describing the development of mobility this report also provides explanations for the growth of passenger and freight transport. Moreover, the Mobility Balance Sheet also focuses on a topical theme: the effects of economic crises on mobility. [nl

Safety advice sheets

CERN Multimedia

HSE Unit

2013-01-01

You never know when you might be faced with questions such as: when/how should I dispose of a gas canister? Where can I find an inspection report? How should I handle/store/dispose of a chemical substance…?   The SI section of the DGS/SEE Group is primarily responsible for safety inspections, evaluating the safety conditions of equipment items, premises and facilities. On top of this core task, it also regularly issues “Safety Advice Sheets” on various topics, designed to be of assistance to users but also to recall and reinforce safety rules and procedures. These clear and concise sheets, complete with illustrations, are easy to display in the appropriate areas. The following safety advice sheets have been issued so far: Other sheets will be published shortly. Suggestions are welcome and should be sent to the SI section of the DGS/SEE Group. Please send enquiries to general-safety-visits.service@cern.ch.

Manifold free multiple sheet superplastic forming

Science.gov (United States)

Elmer, John W.; Bridges, Robert L.

2004-01-13

Fluid-forming compositions in a container attached to enclosed adjacent sheets are heated to relatively high temperatures to generate fluids (gases) that effect inflation of the sheets. Fluid rates to the enclosed space between the sheets can be regulated by the canal from the container. Inflated articles can be produced by a continuous, rather than batch-type, process.

21 CFR 880.5180 - Burn sheet.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Burn sheet. 880.5180 Section 880.5180 Food and... Burn sheet. (a) Identification. A burn sheet is a device made of a porous material that is wrapped aroung a burn victim to retain body heat, to absorb wound exudate, and to serve as a barrier against...

Facts about Glaucoma

Science.gov (United States)

... Information » Glaucoma » Facts About Glaucoma Listen Facts About Glaucoma This information was developed by the National Eye ... is the best person to answer specific questions. Glaucoma Defined What is Glaucoma? Glaucoma is a group ...

Sheet-bulk metal forming – forming of functional components from sheet metals

Directory of Open Access Journals (Sweden)

Merklein Marion

2015-01-01

Full Text Available The paper gives an overview on the application of sheet-bulk metal forming operations in both scientific and industrial environment. Beginning with the need for an innovative forming technology, the definition of this new process class is introduced. The rising challenges of the application of bulk metal forming operations on sheet metals are presented and the demand on a holistic investigation of this topic is motivated. With the help of examples from established production processes, the latest state of technology and the lack on fundamental knowledge is shown. Furthermore, perspectives regarding new research topics within sheet-bulk metal forming are presented. These focus on processing strategies to improve the quality of functional components by the application of process-adapted semi-finished products as well as the local adaption of the tribological system.

Reconstructing the last Irish Ice Sheet 2: a geomorphologically-driven model of ice sheet growth, retreat and dynamics

Science.gov (United States)

Greenwood, Sarah L.; Clark, Chris D.

2009-12-01

The ice sheet that once covered Ireland has a long history of investigation. Much prior work focussed on localised evidence-based reconstructions and ice-marginal dynamics and chronologies, with less attention paid to an ice sheet wide view of the first order properties of the ice sheet: centres of mass, ice divide structure, ice flow geometry and behaviour and changes thereof. In this paper we focus on the latter aspect and use our new, countrywide glacial geomorphological mapping of the Irish landscape (>39 000 landforms), and our analysis of the palaeo-glaciological significance of observed landform assemblages (article Part 1), to build an ice sheet reconstruction yielding these fundamental ice sheet properties. We present a seven stage model of ice sheet evolution, from initiation to demise, in the form of palaeo-geographic maps. An early incursion of ice from Scotland likely coalesced with local ice caps and spread in a south-westerly direction 200 km across Ireland. A semi-independent Irish Ice Sheet was then established during ice sheet growth, with a branching ice divide structure whose main axis migrated up to 140 km from the west coast towards the east. Ice stream systems converging on Donegal Bay in the west and funnelling through the North Channel and Irish Sea Basin in the east emerge as major flow components of the maximum stages of glaciation. Ice cover is reconstructed as extending to the continental shelf break. The Irish Ice Sheet became autonomous (i.e. separate from the British Ice Sheet) during deglaciation and fragmented into multiple ice masses, each decaying towards the west. Final sites of demise were likely over the mountains of Donegal, Leitrim and Connemara. Patterns of growth and decay of the ice sheet are shown to be radically different: asynchronous and asymmetric in both spatial and temporal domains. We implicate collapse of the ice stream system in the North Channel - Irish Sea Basin in driving such asymmetry, since rapid

Pre-LGM Northern Hemisphere ice sheet topography

Directory of Open Access Journals (Sweden)

J. Kleman

2013-10-01

Full Text Available We here reconstruct the paleotopography of Northern Hemisphere ice sheets during the glacial maxima of marine isotope stages (MIS 5b and 4.We employ a combined approach, blending geologically based reconstruction and numerical modeling, to arrive at probable ice sheet extents and topographies for each of these two time slices. For a physically based 3-D calculation based on geologically derived 2-D constraints, we use the University of Maine Ice Sheet Model (UMISM to calculate ice sheet thickness and topography. The approach and ice sheet modeling strategy is designed to provide robust data sets of sufficient resolution for atmospheric circulation experiments for these previously elusive time periods. Two tunable parameters, a temperature scaling function applied to a spliced Vostok–GRIP record, and spatial adjustment of the climatic pole position, were employed iteratively to achieve a good fit to geological constraints where such were available. The model credibly reproduces the first-order pattern of size and location of geologically indicated ice sheets during marine isotope stages (MIS 5b (86.2 kyr model age and 4 (64 kyr model age. From the interglacial state of two north–south obstacles to atmospheric circulation (Rocky Mountains and Greenland, by MIS 5b the emergence of combined Quebec–central Arctic and Scandinavian–Barents-Kara ice sheets had increased the number of such highland obstacles to four. The number of major ice sheets remained constant through MIS 4, but the merging of the Cordilleran and the proto-Laurentide Ice Sheet produced a single continent-wide North American ice sheet at the LGM.

Research on Al-alloy sheet forming formability during warm/hot sheet hydroforming based on elliptical warm bulging test

Science.gov (United States)

Cai, Gaoshen; Wu, Chuanyu; Gao, Zepu; Lang, Lihui; Alexandrov, Sergei

2018-05-01

An elliptical warm/hot sheet bulging test under different temperatures and pressure rates was carried out to predict Al-alloy sheet forming limit during warm/hot sheet hydroforming. Using relevant formulas of ultimate strain to calculate and dispose experimental data, forming limit curves (FLCS) in tension-tension state of strain (TTSS) area are obtained. Combining with the basic experimental data obtained by uniaxial tensile test under the equivalent condition with bulging test, complete forming limit diagrams (FLDS) of Al-alloy are established. Using a quadratic polynomial curve fitting method, material constants of fitting function are calculated and a prediction model equation for sheet metal forming limit is established, by which the corresponding forming limit curves in TTSS area can be obtained. The bulging test and fitting results indicated that the sheet metal FLCS obtained were very accurate. Also, the model equation can be used to instruct warm/hot sheet bulging test.

On Jovian plasma sheet structure

International Nuclear Information System (INIS)

Khurana, K.K.; Kivelson, M.G.

1989-01-01

The authors evaluate several models of Jovian plasma sheet structure by determining how well they organize several aspects of the observed Voyager 2 magnetic field characteristics as a function of Jovicentric radial distance. It is shown that in the local time sector of the Voyager 2 outbound pass (near 0300 LT) the published hinged-magnetodisc models with wave (i.e., models corrected for finite wave velocity effects) are more successful than the published magnetic anomaly model in predicting locations of current sheet crossings. They also consider the boundary between the plasma sheet and the magnetotail lobe which is expected to vary slowly with radial distance. They use this boundary location as a further test of the models of the magnetotail. They show that the compressional MHD waves have much smaller amplitude in the lobes than in the plasma sheet and use this criterion to refine the identification of the plasma-sheet-lobe boundary. When the locations of crossings into and out of the lobes are examined, it becomes evident that the magnetic-anomaly model yields a flaring plasma sheet with a halfwidth of ∼ 3 R J at a radial distance of 20 R J and ∼ 12 R J at a radial distance of 100 R J . The hinged-magnetodisc models with wave, on the other hand, predict a halfwidth of ∼ 3.5 R J independent of distance beyond 20 R J . New optimized versions of the two models locate both the current sheet crossings and lobe encounters equally successfully. The optimized hinged-magnetodisc model suggests that the wave velocity decreases with increasing radial distance. The optimized magnetic anomaly model yields lower velocity contrast than the model of Vasyliunas and Dessler (1981)

Alzheimer's Disease Facts and Figures

Medline Plus

Full Text Available ... Share the facts: Quick Facts Prevalence Mortality Caregivers Cost Special Report Alzheimer's in each state Quick Facts Share the facts: Prevalence The number of Americans living with Alzheimer's is growing — and growing fast. An ...

Cell sheet technology and cell patterning for biofabrication

Energy Technology Data Exchange (ETDEWEB)

Hannachi, Imen Elloumi; Yamato, Masayuki; Okano, Teruo [Institute of Advanced Biomedical Engineering and Science, Tokyo Women' s Medical University, 8-1 Kawada-cho, Shinjuku, Tokyo (Japan)

2009-06-01

We have developed cell sheet technology as a modern method for the fabrication of functional tissue-like and organ-like structures. This technology allows for a sheet of interconnected cells and cells in full contact with their natural extracellular environment to be obtained. A cell sheet can be patterned and composed according to more than one cell type. The key technology of cell sheet engineering is that a fabricated cell sheet can be harvested and transplanted utilizing temperature-responsive surfaces. In this review, we summarize different aspects of cell sheet engineering and provide a survey of the application of cell sheets as a suitable material for biofabrication and clinics. Moreover, since cell micropatterning is a key tool for cell sheet engineering, in this review we focus on the introduction of our approaches to cell micropatterning and cell co-culture to the principles of automation and how they can be subjected to easy robotics programming. Finally, efforts towards making cell sheet technology suitable for biofabrication and robotic biofabrication are also summarized. (topical review)

The statistical studies of the inner boundary of plasma sheet

Directory of Open Access Journals (Sweden)

J. B. Cao

2011-02-01

Full Text Available The penetration of plasma sheet ions into the inner magnetosphere is very important to the inner magnetospheric dynamics since plasma sheet ions are one of the major particle sources of ring current during storm times. However, the direct observations of the inner boundary of the plasma sheet are fairly rare due to the limited number of satellites in near equatorial orbits outside 6.6 RE. In this paper, we used the ion data recorded by TC-1 from 2004 to 2006 to study the distribution of inner boundary of ion plasma sheet (IBIPS and for the first time show the observational distribution of IBIPS in the equatorial plane. The IBIPS has a dawn-dusk asymmetry, being farthest to the Earth in the 06:00 08:00 LT bin and closest to the Earth in the 18:00–20:00 LT bin. Besides, the IBIPS has also a day-night asymmetry, which may be due to the fact that the ions on the dayside are exposed more time to loss mechanisms on their drift paths. The radial distance of IBIPS decrease generally with the increase of Kp index. The mean radial distance of IBIPS is basically larger than 6.6 RE during quiet times and smaller than 6.6 RE during active times. When the strength of convection electric field increases, the inward shift of IBIPS is most significant on the night side (22:00–02:00 LT. For Kp ≤ 0+, only 16% of IBIPSs penetrate inside the geosynchronous orbit. For 2 ≤ Kp +, however, 70% of IBIPSs penetrate inside the geosynchronous orbit. The IBIPS has weak correlations with the AE and Dst indexes. The average correlation coefficient between Ri and Kp is −0.58 while the correlation coefficient between Ri and AE/Dst is only −0.29/0.17. The correlation coefficients are local time dependent. Particularly, Ri and Kp are highly correlated (r=−0.72 in the night sector, meaning that the radial distance of IBIPS Ri in the night sector has the good response to the Kp index These observations indicate that Kp plays a key role in determining the position of

Energy information sheets

Energy Technology Data Exchange (ETDEWEB)

1993-12-02

The National Energy Information Center (NEIC), as part of its mission, provides energy information and referral assistance to Federal, State, and local governments, the academic community, business and industrial organizations, and the general public. Written for the general public, the EIA publication Energy Information Sheets was developed to provide information on various aspects of fuel production, prices, consumption and capability. The information contained herein pertains to energy data as of December 1991. Additional information on related subject matter can be found in other EIA publications as referenced at the end of each sheet.

Weld Repair of Thin Aluminum Sheet

Science.gov (United States)

Beuyukian, C. S.; Mitchell, M. J.

1986-01-01

Weld repairing of thin aluminum sheets now possible, using niobium shield and copper heat sinks. Refractory niobium shield protects aluminum adjacent to hole, while copper heat sinks help conduct heat away from repair site. Technique limits tungsten/inert-gas (TIG) welding bombardment zone to melt area, leaving surrounding areas around weld unaffected. Used successfully to repair aluminum cold plates on Space Shuttle, Commercial applications, especially in sealing fractures, dents, and holes in thin aluminum face sheets or clad brazing sheet in cold plates, heat exchangers, coolers, and Solar panels. While particularly suited to thin aluminum sheet, this process also used in thicker aluminum material to prevent surface damage near weld area.

Modeling the Alzheimer Abeta17-42 fibril architecture: tight intermolecular sheet-sheet association and intramolecular hydrated cavities.

Science.gov (United States)

Zheng, Jie; Jang, Hyunbum; Ma, Buyong; Tsai, Chung-Jun; Nussinov, Ruth

2007-11-01

We investigate Abeta(17-42) protofibril structures in solution using molecular dynamics simulations. Recently, NMR and computations modeled the Abeta protofibril as a longitudinal stack of U-shaped molecules, creating an in-parallel beta-sheet and loop spine. Here we study the molecular architecture of the fibril formed by spine-spine association. We model in-register intermolecular beta-sheet-beta-sheet associations and study the consequences of Alzheimer's mutations (E22G, E22Q, E22K, and M35A) on the organization. We assess the structural stability and association force of Abeta oligomers with different sheet-sheet interfaces. Double-layered oligomers associating through the C-terminal-C-terminal interface are energetically more favorable than those with the N-terminal-N-terminal interface, although both interfaces exhibit high structural stability. The C-terminal-C-terminal interface is essentially stabilized by hydrophobic and van der Waals (shape complementarity via M35-M35 contacts) intermolecular interactions, whereas the N-terminal-N-terminal interface is stabilized by hydrophobic and electrostatic interactions. Hence, shape complementarity, or the "steric zipper" motif plays an important role in amyloid formation. On the other hand, the intramolecular Abeta beta-strand-loop-beta-strand U-shaped motif creates a hydrophobic cavity with a diameter of 6-7 A, allowing water molecules and ions to conduct through. The hydrated hydrophobic cavities may allow optimization of the sheet association and constitute a typical feature of fibrils, in addition to the tight sheet-sheet association. Thus, we propose that Abeta fiber architecture consists of alternating layers of tight packing and hydrated cavities running along the fibrillar axis, which might be possibly detected by high-resolution imaging.

Understanding the response of commercial and institutional organizations to the California energy crisis. A report to the California Energy Commission - Sylvia Bender, Project Manager

Energy Technology Data Exchange (ETDEWEB)

Lutzenhiser, Loren; Janda, Kathryn; Kunkle, Rick; Payne, Christopher

2002-07-24

Beginning in the summer of 2000, California experienced serious energy supply problems, sharp increases in wholesale (and retail) electricity and natural gas prices, and isolated blackouts. In response to the rapidly worsening electricity situation in California in late 2000, the state set, as an initial goal, the reduction of the state's peak demand for the summer of 2001 by 5,000 megawatts. To meet this goal, the governor and legislature took a variety of steps to enhance supply, encourage rapid voluntary reductions in demand, and provide incentives for actions that would result in load reductions. Three bills-Assembly Bill 970, Senate Bill X1 5 and Assembly Bill X1 29-allocated roughly $950 million for consumption and demand reduction programs. The governor also enacted a variety of additional measures, including the ''Flex Your Power'' (media awareness and direct business involvement) campaign, requirements for retail sector outdoor lighting reductions, and toughening of energy efficiency building codes. There were, in fact, significant reductions in electricity demand in California during the summer of 2001 and the large number of expected supply disruptions was avoided. To understand the nature of these demand reductions and the motivations for consumer response, Washington State University (WSU) undertook a study for the California Energy Commission (CEC) focusing on conservation behavior in the residential, commercial, and agricultural sectors. The research presented in this report represents an exploration of the response of commercial and institutional organizations to the California energy situation and the unique set of influences that existed during this time. These influences included informational messages and media attention, program interventions, price changes, and external triggering events (e.g., blackouts). To better understand the effects of these influences on organizational response to the energy situation, we

Effect of Cell Sheet Manipulation Techniques on the Expression of Collagen Type II and Stress Fiber Formation in Human Chondrocyte Sheets.

Science.gov (United States)

Wongin, Sopita; Waikakul, Saranatra; Chotiyarnwong, Pojchong; Siriwatwechakul, Wanwipa; Viravaidya-Pasuwat, Kwanchanok

2018-03-01

Cell sheet technology is applied to human articular chondrocytes to construct a tissue-like structure as an alternative treatment for cartilage defect. The effect of a gelatin manipulator, as a cell sheet transfer system, on the quality of the chondrocyte sheets was investigated. The changes of important chondrogenic markers and stress fibers, resulting from the cell sheet manipulation, were also studied. The chondrocyte cell sheets were constructed with patient-derived chondrocytes using a temperature-responsive polymer and a gelatin manipulator as a transfer carrier. The properties of the cell sheets, including sizes, expression levels of collagen type II and I, and the localization of the stress fibers, were assessed and compared with those of the cell sheets harvested without the gelatin manipulator. Using the gelatin manipulator, the original size of the chondrocyte cell sheets was retained with abundant stress fibers, but with a decrease in the expression of collagen type II. Without the gelatin manipulator, although the cell shrinkage occurred, the cell sheet with suppressed stress fiber formation showed significantly higher levels of collagen type II. These results support our observations that stress fiber formation in chondrocyte cell sheets affected the production of chondrogenic markers. These densely packed tissue-like structures possessed a good chondrogenic activity, indicating their potential for use in autologous chondrocyte implantation to treat cartilage defects.

The Effects of Dilute Sulfuric Acid on Sheet Resistance and Transmittance in Poly(3,4-thylenedioxythiophene: Poly(styrenesulfonate Films

Directory of Open Access Journals (Sweden)

Teen-Hang Meen

2013-01-01

Full Text Available The conductivity of poly(3,4-thylenedioxythiophene: poly(styrenesulfonate (PEDOT: PSS films by adding various molar concentrations of sulfuric acid (H2SO4 was improved and studied in this paper. The sheet resistance of the doped PEDOT: PSS film was enhanced with increasing the ratio of H2SO4, but it drops after the maximum sheet resistance. The reason for this phenomenon is resulting from the fact that the H2SO4 preferentially react with the sorbitol which is so-called the pinacol rearrangement. The nonconductive anions of some PSS− were substituted by the conductive anions of hydrogen sulfate (HSO4- when the residual H2SO4 reacted with PSS. In addition to the substitution reaction, PEDOT chains were increasingly aggregated with increasing the ratio of H2SO4. After doped H2SO4, the sheet resistance of H2SO4-doped PEDOT: PSS film is improved nearly 36%; the surface roughness is reduced from 1.268 nm to 0.822 nm and the transmittance is up to 91.9% in the visible wavelength range from 400 to 700 nm.

California Workforce: California Faces a Skills Gap

Science.gov (United States)

Public Policy Institute of California, 2011

2011-01-01

California's education system is not keeping up with the changing demands of the state's economy--soon, California will face a shortage of skilled workers. Projections to 2025 suggest that the economy will continue to need more and more highly educated workers, but that the state will not be able to meet that demand. If current trends persist,…

Settlement during vibratory sheet piling

NARCIS (Netherlands)

Meijers, P.

2007-01-01

During vibratory sheet piling quite often the soil near the sheet pile wall will settle. In many cases this is not a problem. For situations with houses, pipelines, roads or railroads at relative short distance these settlements may not be acceptable. The purpose of the research described in this

California sea lions (Zalophus californianus californianus) have lower chlorinated hydrocarbon contents in northern Baja California, Mexico, than in California, USA

International Nuclear Information System (INIS)

Del Toro, Ligeia; Heckel, Gisela; Camacho-Ibar, Victor F.; Schramm, Yolanda

2006-01-01

Chlorinated hydrocarbons (CHs) were determined in blubber samples of 18 California sea lions (Zalophus californianus californianus) that stranded dead along Todos Santos Bay, Ensenada, Baja California, Mexico, January 2000-November 2001. ΣDDTs were the dominant group (geometric mean 3.8 μg/g lipid weight), followed by polychlorinated biphenyls (ΣPCBs, 2.96 μg/g), chlordanes (0.12 μg/g) and hexachlorocyclohexanes (0.06 μg/g). The ΣDDTs/ΣPCBs ratio was 1.3. We found CH levels more than one order of magnitude lower than those reported for California sea lion samples collected along the California coast, USA, during the same period as our study. This sharp north-south gradient suggests that Z. californianus stranded in Ensenada (most of them males) would probably have foraged during the summer near rookeries 500-1000 km south of Ensenada and the rest of the year migrate northwards, foraging along the Baja California peninsula, including Ensenada, and probably farther north. - Results suggest that sea lion prey must also have lower hydrocarbons in Baja California than in California in the USA

California sea lions (Zalophus californianus californianus) have lower chlorinated hydrocarbon contents in northern Baja California, Mexico, than in California, USA

Energy Technology Data Exchange (ETDEWEB)

Del Toro, Ligeia [Universidad Autonoma de Baja California (UABC), Facultad de Ciencias Marinas, Ensenada, Baja California (Mexico); Investigacion y Conservacion de Mamiferos Marinos de Ensenada, A.C., Placido Mata 2309 Depto. D-5, Condominio Las Fincas, Ensenada, Baja California 22810 (Mexico); Heckel, Gisela [Investigacion y Conservacion de Mamiferos Marinos de Ensenada, A.C., Placido Mata 2309 Depto. D-5, Condominio Las Fincas, Ensenada, Baja California 22810 (Mexico) and Centro de Investigacion Cientifica y de Educacion Superior de Ensenada, B.C. Km 107 Carretera Tijuana-Ensenada, Ensenada, Baja California 22860 (Mexico)]. E-mail: gheckel@cicese.mx; Camacho-Ibar, Victor F. [Instituto de Investigaciones Oceanologicas, UABC, Apdo. Postal 453, Ensenada, Baja California 22860 (Mexico); Schramm, Yolanda [Universidad Autonoma de Baja California (UABC), Facultad de Ciencias Marinas, Ensenada, Baja California (Mexico); Investigacion y Conservacion de Mamiferos Marinos de Ensenada, A.C., Placido Mata 2309 Depto. D-5, Condominio Las Fincas, Ensenada, Baja California 22810 (Mexico)

2006-07-15

Chlorinated hydrocarbons (CHs) were determined in blubber samples of 18 California sea lions (Zalophus californianus californianus) that stranded dead along Todos Santos Bay, Ensenada, Baja California, Mexico, January 2000-November 2001. {sigma}DDTs were the dominant group (geometric mean 3.8 {mu}g/g lipid weight), followed by polychlorinated biphenyls ({sigma}PCBs, 2.96 {mu}g/g), chlordanes (0.12 {mu}g/g) and hexachlorocyclohexanes (0.06 {mu}g/g). The {sigma}DDTs/{sigma}PCBs ratio was 1.3. We found CH levels more than one order of magnitude lower than those reported for California sea lion samples collected along the California coast, USA, during the same period as our study. This sharp north-south gradient suggests that Z. californianus stranded in Ensenada (most of them males) would probably have foraged during the summer near rookeries 500-1000 km south of Ensenada and the rest of the year migrate northwards, foraging along the Baja California peninsula, including Ensenada, and probably farther north. - Results suggest that sea lion prey must also have lower hydrocarbons in Baja California than in California in the USA.

49 CFR 1243.2 - Condensed balance sheet.

Science.gov (United States)

2010-10-01

... 49 Transportation 9 2010-10-01 2010-10-01 false Condensed balance sheet. 1243.2 Section 1243.2... § 1243.2 Condensed balance sheet. Commencing with reports for the 3 months beginning January 1, 1972, and... hereby, required to compile and file quarterly reports of balance sheet items in accordance with...

Electron energization in the geomagnetic tail current sheet

International Nuclear Information System (INIS)

Lyons, L.R.

1984-01-01

Electron motion in the distant tail current sheet is evaluated and found to violate the guiding center approximation at energies > or approx. =100 eV. Most electrons within the energy range approx.10 -1 -10 2 keV that enter the current sheet become trapped within the magnetic field reversal region. These electrons then convect earthward and gain energy from the cross-tail electric field. If the energy spectrum of electrons entering the current sheet is similar to that of electrons from the boundary layer surrounding the magnetotail, the energy gain from the electric field produces electron energy spectra comparable to those observed in the earth's plasma sheet. Thus current sheet interactions can be a significant source of particles and energy for plasma sheet electrons as well as for plasma sheet ions. A small fraction of electrons within the current sheet has its pitch angles scattered so as to be ejected from the current sheet within the atmospheric loss cone. These electrons can account for the electron precipitation near the high-latitude boundary of energetic electrons, which is approximately isotropic in pitch angle up to at least several hundred keV. Current sheet interaction should cause approximately isotropic auroral precipitation up to several hundred keV energies, which extends to significantly lower latitudes for ions than for electrons in agreement with low-altitude satellite observations. Electron precipitation associated with diffuse aurora generally has a transition at 1-10 keV to anisotropic pitch angle distributions. Such electron precipitation cannot be explained by current sheet interactions, but it can be explained by pitch angle diffusion driven by plasma turbulence

Bessel light sheet structured illumination microscopy

Science.gov (United States)

Noshirvani Allahabadi, Golchehr

Biomedical study researchers using animals to model disease and treatment need fast, deep, noninvasive, and inexpensive multi-channel imaging methods. Traditional fluorescence microscopy meets those criteria to an extent. Specifically, two-photon and confocal microscopy, the two most commonly used methods, are limited in penetration depth, cost, resolution, and field of view. In addition, two-photon microscopy has limited ability in multi-channel imaging. Light sheet microscopy, a fast developing 3D fluorescence imaging method, offers attractive advantages over traditional two-photon and confocal microscopy. Light sheet microscopy is much more applicable for in vivo 3D time-lapsed imaging, owing to its selective illumination of tissue layer, superior speed, low light exposure, high penetration depth, and low levels of photobleaching. However, standard light sheet microscopy using Gaussian beam excitation has two main disadvantages: 1) the field of view (FOV) of light sheet microscopy is limited by the depth of focus of the Gaussian beam. 2) Light-sheet images can be degraded by scattering, which limits the penetration of the excitation beam and blurs emission images in deep tissue layers. While two-sided sheet illumination, which doubles the field of view by illuminating the sample from opposite sides, offers a potential solution, the technique adds complexity and cost to the imaging system. We investigate a new technique to address these limitations: Bessel light sheet microscopy in combination with incoherent nonlinear Structured Illumination Microscopy (SIM). Results demonstrate that, at visible wavelengths, Bessel excitation penetrates up to 250 microns deep in the scattering media with single-side illumination. Bessel light sheet microscope achieves confocal level resolution at a lateral resolution of 0.3 micron and an axial resolution of 1 micron. Incoherent nonlinear SIM further reduces the diffused background in Bessel light sheet images, resulting in

Magnetic configurations of the tilted current sheets in magnetotail

Directory of Open Access Journals (Sweden)

C. Shen

2008-11-01

Full Text Available In this research, the geometrical structures of tilted current sheet and tail flapping waves have been analysed based on multiple spacecraft measurements and some features of the tilted current sheets have been made clear for the first time. The geometrical features of the tilted current sheet revealed in this investigation are as follows: (1 The magnetic field lines (MFLs in the tilted current sheet are generally plane curves and the osculating planes in which the MFLs lie are about vertical to the equatorial plane, while the normal of the tilted current sheet leans severely to the dawn or dusk side. (2 The tilted current sheet may become very thin, the half thickness of its neutral sheet is generally much less than the minimum radius of the curvature of the MFLs. (3 In the neutral sheet, the field-aligned current density becomes very large and has a maximum value at the center of the current sheet. (4 In some cases, the current density is a bifurcated one, and the two humps of the current density often superpose two peaks in the gradient of magnetic strength, indicating that the magnetic gradient drift current is possibly responsible for the formation of the two humps of the current density in some tilted current sheets. Tilted current sheets often appear along with tail current sheet flapping waves. It is found that, in the tail flapping current sheets, the minimum curvature radius of the MFLs in the current sheet is rather large with values around 1 RE, while the neutral sheet may be very thin, with its half thickness being several tenths of RE. During the flapping waves, the current sheet is tilted substantially, and the maximum tilt angle is generally larger than 45°. The phase velocities of these flapping waves are several tens km/s, while their periods and wavelengths are several tens of minutes, and several earth radii, respectively. These tail flapping events generally last several hours and occur during quiet periods or periods of

Relativistic current sheets in electron-positron plasmas

International Nuclear Information System (INIS)

Zenitani, S.

2008-01-01

The current sheet structure with magnetic field reversal is one of the fundamental structure in space and astrophysical plasmas. It draws recent attention in high-energy astrophysical settings, where relativistic electron-positron plasmas are considered. In this talk we will review the recent progress of the physical processes in the relativistic current sheet. The kinetic stability of a single current sheet, the nonlinear behavior of these instabilities, and recent challenges on the multi current sheet systems are introduced. We will also introduce some problems of magnetic reconnection in these relativistic environments. (author)

Tectonic map of the Circum-Pacific region, Pacific basin sheet

Science.gov (United States)

Scheibner, E.; Moore, G.W.; Drummond, K.J.; Dalziel, Corvalan Q.J.; Moritani, T.; Teraoka, Y.; Sato, T.; Craddock, C.

2013-01-01

Circum-Pacific Map Project: The Circum-Pacific Map Project was a cooperative international effort designed to show the relationship of known energy and mineral resources to the major geologic features of the Pacific basin and surrounding continental areas. Available geologic, mineral, and energy-resource data are being complemented by new, project-developed data sets such as magnetic lineations, seafloor mineral deposits, and seafloor sediment. Earth scientists representing some 180 organizations from more than 40 Pacific-region countries are involved in this work. Six overlapping equal-area regional maps at a scale of 1:10,000,000 form the cartographic base for the project: the four Circum-Pacific Quadrants (Northwest, Southwest, Southeast, and Northeast), and the Antarctic and Arctic Sheets. There is also a Pacific Basin Sheet at a scale of 1:17,000,000. The Base Map Series and the Geographic Series (published from 1977 to 1990), the Plate-Tectonic Series (published in 1981 and 1982), the Geodynamic Series (published in 1984 and 1985), and the Geologic Series (published from 1984 to 1989) all include six map sheets. Other thematic map series in preparation include Mineral-Resources, Energy-Resources and Tectonic Maps. Altogether, more than 50 map sheets are planned. The maps were prepared cooperatively by the Circum-Pacific Council for Energy and Mineral Resources and the U.S. Geological Survey and are available from the Branch of Distribution, U. S. Geological Survey, Box 25286, Federal Center, Denver, Colorado 80225, U.S.A. The Circum-Pacific Map Project is organized under six panels of geoscientists representing national earth-science organizations, universities, and natural-resource companies. The six panels correspond to the basic map areas. Current panel chairmen are Tomoyuki Moritani (Northwest Quadrant), R. Wally Johnson (Southwest Quadrant), Ian W.D. Dalziel (Antarctic Region), vacant. (Southeast Quadrant), Kenneth J. Drummond (Northeast Quadrant), and

Tube sheet design for PFBR steam generator

International Nuclear Information System (INIS)

Chellapandi, P.; Chetal, S.C.; Bhoje, S.B.

1991-01-01

Top and bottom tube sheets of PFBR Steam Generators have been analysed with 3D and axisymmetric models using CASTEM Programs. Analysis indicates that the effects of piping reactions at the inlet/outlet nozzles on the primary stresses in the tube sheets are negligible and the asymmetricity of the deformation pattern introduced in the tube sheet by the presence of inlet/outlet and manhole nozzles is insignificant. The minimum tube sheet thicknesses for evaporator and reheater are 135 mm and 75 mm respectively. Further analysis has indicated the minimum fillet radius at the junction of tube sheet and dished end should be 20 mm. Simplified methodology has been developed to arrive at the number of thermal baffles required to protect the tube sheet against fatigue damage due to thermal transient. This method has been applied to PFBR steam generators to determine the required number of thermal baffles. For protecting the bottom tube sheet of evaporator against the thermal shock due to feed water and secondary pump trip, one thermal shield is found to be sufficient. Further analysis is required to decide upon the actual number to take care of the severe thermal transient, following the event of sudden dumping of water/steam, immediately after the sodium-water reaction. (author)

17 CFR 210.5-02 - Balance sheets.

Science.gov (United States)

2010-04-01

... customers at the date of the balance sheet. Include a general description of the prerequisites for billing... 17 Commodity and Securities Exchanges 2 2010-04-01 2010-04-01 false Balance sheets. 210.5-02... Balance sheets. The purpose of this rule is to indicate the various line items and certain additional...

Wind energy - The facts. Vol. 3: Industry and employment

International Nuclear Information System (INIS)

Jacobsen, Henrik

2004-01-01

Since the last Wind Energy - The Facts report published in 1999, the European wind energy industry has made significant progress. There are several ways of monitoring this progress, such as measuring electricity output in MW or kW hours. However, the usual method is to use a measurement of installed capacity, so this chapter demonstrates national markets and their growth in terms of MW capacity installed. Wind experienced a surge of growth in California in the 1980s thanks to a combination of state and federal energy and investment tax credits. From 1980 to 1995, around 1,700 MW of wind capacity was installed and, although there were some turbines of poorer quality, the boom period provided a major export market for European manufacturers, and did much to establish the credibility of the industry. Since then, Europe has turned the tables and consolidated its position as the global market leader. Within Europe, certain countries are particularly strong: the top five in terms of installed capacity being Germany, Spain, Denmark, The Netherlands and Italy. (au)

Pressure balance between lobe and plasma sheet

International Nuclear Information System (INIS)

Baumjohann, W.; Paschmann, G.; Luehr, H.

1990-01-01

Using eight months of AMPTE/IRM plasma and magnetic field data, the authors have done a statistical survey on the balance of total (thermal and magnetic) pressure in the Earth's plasma sheet and tail lobe. About 300,000 measurements obtained in the plasma sheet and the lobe were compared for different levels of magnetic activity as well as different distances from the Earth. The data show that lobe and plasma sheet pressure balance very well. Even in the worst case they do not deviate by more than half of the variance in the data itself. Approximately constant total pressure was also seen during a quiet time pass when IRM traversed nearly the whole magnetotail in the vertical direction, from the southern hemisphere lobe through the neutral sheet and into the northern plasma sheet boundary layer

Food Irradiation Newsletter. V. 11, no. 2

International Nuclear Information System (INIS)

1987-09-01

This issue includes a report of the ICGFI's Workshop on Food Irradiation for Food Control Officials, convened in Budapest, Hungary, May 1987. To provide further assurance on the safety and wholesomeness of irradiated food in general and details about polyploidy (increase in number of chromosomes) resulting from consumption of freshly irradiated wheat in particular, ICGFI Secretariat issued a fact sheet on ''Safety and Wholesomeness of Irradiated Foods: International Status - Facts and Figures'' to its member countries in July 1987. The Newsletter also contains summary reports of two important market testings of irradiated food, i.e. papaya in California in March and strawberries in France in June, which proved that consumers will buy irradiated foods, and status reports on food irradiation in France and Mexico. Ref, 1 tab

Thermomechanical processing of plasma sprayed intermetallic sheets

Science.gov (United States)

Hajaligol, Mohammad R.; Scorey, Clive; Sikka, Vinod K.; Deevi, Seetharama C.; Fleischhauer, Grier; Lilly, Jr., A. Clifton; German, Randall M.

2001-01-01

A powder metallurgical process of preparing a sheet from a powder having an intermetallic alloy composition such as an iron, nickel or titanium aluminide. The sheet can be manufactured into electrical resistance heating elements having improved room temperature ductility, electrical resistivity, cyclic fatigue resistance, high temperature oxidation resistance, low and high temperature strength, and/or resistance to high temperature sagging. The iron aluminide has an entirely ferritic microstructure which is free of austenite and can include, in weight %, 4 to 32% Al, and optional additions such as .ltoreq.1% Cr, .gtoreq.0.05% Zr .ltoreq.2% Ti, .ltoreq.2% Mo, .ltoreq.1% Ni, .ltoreq.0.75% C, .ltoreq.0.1% B, .ltoreq.1% submicron oxide particles and/or electrically insulating or electrically conductive covalent ceramic particles, .ltoreq.1% rare earth metal, and/or .ltoreq.3% Cu. The process includes forming a non-densified metal sheet by consolidating a powder having an intermetallic alloy composition such as by roll compaction, tape casting or plasma spraying, forming a cold rolled sheet by cold rolling the non-densified metal sheet so as to increase the density and reduce the thickness thereof and annealing the cold rolled sheet. The powder can be a water, polymer or gas atomized powder which is subjecting to sieving and/or blending with a binder prior to the consolidation step. After the consolidation step, the sheet can be partially sintered. The cold rolling and/or annealing steps can be repeated to achieve the desired sheet thickness and properties. The annealing can be carried out in a vacuum furnace with a vacuum or inert atmosphere. During final annealing, the cold rolled sheet recrystallizes to an average grain size of about 10 to 30 .mu.m. Final stress relief annealing can be carried out in the B2 phase temperature range.

Lower hybrid drift instability in a current sheet with anisotropic temperature

International Nuclear Information System (INIS)

Huang Feng; Liu Guohong; Yan Fei; Deng Yan; Chen Yinhua; Yu, M Y; Chen Hanshuang

2013-01-01

The effect of the temperature anisotropy on the lower hybrid drift instability (LHDI) in a current sheet is investigated using local kinetic theory. It is found that the ratio r te of the perpendicular to parallel electron temperatures can significantly affect the instability. In fact, a critical value exists r te = r te * , such that when r te >r te * the LHD waves are unstable if the perpendicular wave vector k y is between two threshold values, and when r te te * the LHD mode is stable for any k y . It is also found that r te * increases and the unstable LHD regime shrinks as the parallel wave vector k z increases. That is, sufficiently low perpendicular electron temperature can stabilize the LHDI, especially that of short parallel wavelength. (paper)

17 CFR 210.7-03 - Balance sheets.

Science.gov (United States)

2010-04-01

... 17 Commodity and Securities Exchanges 2 2010-04-01 2010-04-01 false Balance sheets. 210.7-03... 1940, AND ENERGY POLICY AND CONSERVATION ACT OF 1975 Insurance Companies § 210.7-03 Balance sheets. (a... otherwise permitted by the Commission, should appear on the face of the balance sheets and in the notes...

Disposal sheet for preventing scattering of radioactive contaminated material

International Nuclear Information System (INIS)

Miyasaka, Shun-ichi; Kurioka, Hitoshi; Nakamura, Kenjiro.

1990-01-01

Upon disposal of vinyl sheets at the final stage of dismantling operation for nuclear buildings, etc., radioactive contaminated materials caused by cutting concretes, etc. remain on the sheets. In view of the above, members capable of restoring original shape due to the temperature difference are attached to the sheet main body so that the sheet main body may be folded into a bag-like shape. Since the members as described above are bent upon temperature elevation in the sheets, the sheet main body is pulled by the members and then spontaneously folded into a bag-like shape. As a result, the radioactive contaminated materials remaining on the sheets are wrapped into the sheet main body free from touch to operator's hands or without scattering to the surrounding. This can prevent operator's external and internal exposure. (T.M.)

Brain Aneurysm Statistics and Facts

Science.gov (United States)

... Statistics and Facts A- A A+ Brain Aneurysm Statistics and Facts An estimated 6 million people in ... Understanding the Brain Warning Signs/ Symptoms Brain Aneurysm Statistics and Facts Seeking Medical Attention Risk Factors Aneurysm ...

Epidemiologic studies of coronary heart disease and stroke in Japanese men living in Japan, Hawaii, and California: prevalence of coronary and hypertensive heart disease and associated risk factors. [Coronary and hypertensive heart disease in Japanese men living in Japan, Hawaii, and California

Energy Technology Data Exchange (ETDEWEB)

Marmot, M G; Syme, S L; Kagan, A; Kato, H; Cohen, J B; Belsky, J L

1974-01-01

A study of coronary heart disease (CHD) among Japanese migrants compared with Japanese living in Japan provided the opportunity to study factors possibly responsible for the high rates of CHD in America as compared with Japan. Comparable methods were employed in examining 11,900 men of Japanese ancestry aged 45-69 living in Japan, Hawaii, and California. The age-adjusted prevalence rates/1000 for definite CHD as determined by electrocardiogram were: Japan 5.3, Hawaii 5.2, and California 10.8. For definite plus possible CHD the rates were 25.4, 34.7, and 44.6. The prevalence of angina pectoris and pain of possible myocardial infarction, determined by questionnaire, showed a similar gradient. Elevated serum cholesterol showed a Japan < Hawaii < California gradient, but the prevalence of hypertension in Japan was intermediate between the prevalence in Hawaii and the higher prevalence in California. The three geographical locations were compared as to prevalence of CHD at comparable levels of blood pressure and cholesterol. At each blood pressure level and at each cholesterol level, the greater prevalence of CHD in California persisted. These facts, plus the near universality of smoking in Japan, suggest that conventional risk factors only partly explain the observed gradient in CHD. (auth)

Single Point Incremental Forming using a Dummy Sheet

DEFF Research Database (Denmark)

Skjødt, Martin; Silva, Beatriz; Bay, Niels

2007-01-01

A new version of single point incremental forming (SPIF) is presented. This version includes a dummy sheet on top of the work piece, thus forming two sheets instead of one. The dummy sheet, which is in contact with the rotating tool pin, is discarded after forming. The new set-up influences....... The possible influence of friction between the two sheets is furthermore investigated. The results show that the use of a dummy sheet reduces wear of the work piece to almost zero, but also causes a decrease in formability. Bulging of the planar sides of the pyramid is reduced and surface roughness...

Neutron spatial distribution measurement with 6Li-contained thermoluminescent sheets

International Nuclear Information System (INIS)

Konnai, A.; Odano, N.; Sawamura, H.; Ozasa, N.; Ishikawa, Y.

2006-01-01

We have been developing a thermoluminescent (TL) sheet for photon dosimetry (TL sheet) with thermoluminescent material of LiF:Mg, Cu, P and a co-polymer of ethylene and tetrafluoroethylene. For the purpose of a development of simple method for neutron spatial distribution measurement, TL sheet for neutron detection (NTL sheet) is made by adding 94.7% enriched 6 LiF to TL sheet. TL material in TL sheet is directly excited by ionizing radiation whereas, in the case of neutron detection, TL material in NTL sheet is indirectly excited by neutron capture reaction. That is neutron distribution can be obtained with TL caused by α particle from 6 Li(n, α) 3 H reaction. Responses of NTL sheets to neutrons were examined at the neutron beam irradiation facility for Boron Neutron Capture Therapy (BNCT) in JRR-4 research reactor in Japan Atomic Energy Agency. TL and NTL sheets were exposed to striped and roundly distributed neutron fields. Attenuations of neutron flux in air and water were also observed using NTL sheets. TL sheets were also exposed on the same conditions and compared with NTL sheets. TL intensity ratios of NTL sheet to TL sheet were consistent with the calculated value from 6 Li content. Thermal neutron attenuation observed by NTL sheet also corresponded with the result measured by Au wire radioactivation and TLD chips, which were currently used in BNCT at JRR-4. These results were analyzed with by Monte Carlo simulation. The present results indicated that NTL sheet is applicable to measurement of neutron spatial distribution. (author)

On the possible eigenoscillations of neutral sheets

International Nuclear Information System (INIS)

Almeida, W.A.; Costa, J.M. da; Aruquipa, E.G.; Sudano, J.P.

1974-12-01

A neutral sheet model with hyperbolic tangent equilibrium magnetic field and hyperbolic square secant density profiles is considered. It is shown that the equation for small oscillations takes the form of an eigenvalue oscillation problem. Computed eigenfrequencies of the geomagnetic neutral sheet were found to be in the range of the resonant frequencies of the geomagnetic plasma sheet computed by other authors

Uranium mining sites - Thematic sheets

International Nuclear Information System (INIS)

2009-01-01

A first sheet proposes comments, data and key numbers about uranium extraction in France: general overview of uranium mining sites, status of waste rock and tailings after exploitation, site rehabilitation. The second sheet addresses the sources of exposure to ionizing radiations due to ancient uranium mining sites: discussion on the identification of these sources associated with these sites, properly due to mining activities or to tailings, or due to the transfer of radioactive substances towards water and to the contamination of sediments, description of the practice and assessment of radiological control of mining sites. A third sheet addresses the radiological exposure of public to waste rocks, and the dose assessment according to exposure scenarios: main exposure ways to be considered, studied exposure scenarios (passage on backfilled path and grounds, stay in buildings built on waste rocks, keeping mineralogical samples at home). The fourth sheet addresses research programmes of the IRSN on uranium and radon: epidemiological studies (performed on mine workers; on French and on European cohorts, French and European studies on the risk of lung cancer associated with radon in housing), study of the biological effects of chronic exposures. The last sheet addresses studies and expertises performed by the IRSN on ancient uranium mining sites in France: studies commissioned by public authorities, radioactivity control studies performed by the IRSN about mining sites, participation of the IRSN to actions to promote openness to civil society

Sheet, ligament and droplet formation in swirling primary atomization

Directory of Open Access Journals (Sweden)

Changxiao Shao

2018-04-01

Full Text Available We report direct numerical simulations of swirling liquid atomization to understand the physical mechanism underlying the sheet breakup of a non-turbulent liquid swirling jet which lacks in-depth investigation. The volume-of-fluid (VOF method coupled with adapted mesh refinement (AMR technique in GERRIS code is employed in the present simulation. The mechanisms of sheet, ligament and droplet formation are investigated. It is observed that the olive-shape sheet structure is similar to the experimental result qualitatively. The numerical results show that surface tension, pressure difference and swirling effect contribute to the contraction and extension of liquid sheet. The ligament formation is partially at the sheet rim or attributed to the extension of liquid hole. Especially, the movement of hairpin vortex exerts by an anti-radial direction force to the sheet surface and leads to the sheet thinness. In addition, droplet formation is attributed to breakup of ligament and central sheet.

Sheet, ligament and droplet formation in swirling primary atomization

Science.gov (United States)

Shao, Changxiao; Luo, Kun; Chai, Min; Fan, Jianren

2018-04-01

We report direct numerical simulations of swirling liquid atomization to understand the physical mechanism underlying the sheet breakup of a non-turbulent liquid swirling jet which lacks in-depth investigation. The volume-of-fluid (VOF) method coupled with adapted mesh refinement (AMR) technique in GERRIS code is employed in the present simulation. The mechanisms of sheet, ligament and droplet formation are investigated. It is observed that the olive-shape sheet structure is similar to the experimental result qualitatively. The numerical results show that surface tension, pressure difference and swirling effect contribute to the contraction and extension of liquid sheet. The ligament formation is partially at the sheet rim or attributed to the extension of liquid hole. Especially, the movement of hairpin vortex exerts by an anti-radial direction force to the sheet surface and leads to the sheet thinness. In addition, droplet formation is attributed to breakup of ligament and central sheet.

Copper contamination in thin stainless steel sheet

International Nuclear Information System (INIS)

Holbert, R.K. Jr.; Dobbins, A.G.; Bennett, R.K. Jr.

1986-01-01

The standard welding technique used at Oak Ridge Y-12 Plant for joining thin stainless sheet is the gas tungsten arc (GTA) welding process. One of the reoccurring problems with the sheet welds is surface cracking in the heat-affected zone (HAZ). Metallography shows that the cracks are only about 0.05 mm (0.002 in.) deep which is significant in a 0.25 mm (0.01 in.) thick sheet. Thus, welding requirements do not permit any surfacing cracking as detected by a fluorescent dye penetrant test conducted on every part after welding. Surface cracks have been found in both of the two most common weld designs in the thin sheet fabricated at the Oak Ridge Y-12 Plant. These butt joints are welded between two 0.25 mm thick stainless steel sheets and a tube with eyelet welded to a 25 mm (0.98 in.) thick sheet. The weld between the two sheets is made on a semiautomatic seam welding unit, whereas the tube-to-eyelet-to-sheet welds are done manually. The quality of both welds is very dependent on the welding procedure and the way the parts are placed in the weld fixturing. Metallographic examination has indicated that some welded parts with surface cracking in the weld region had copper particles on the surface, and the question of copper contamination has been raised. With the aid of a scanning electron microscope and an electron microprobe, the existence of copper in an around the surface cracks has been verified. The copper is on the surface of the parts prior to welding in the form of small dust particles

World-sheet gauge fields in superstrings

International Nuclear Information System (INIS)

Porrati, M.; Tomboulis, E.T.

1989-01-01

We investigate the introduction of world-sheet 2-dimensional gauge fields in a manner consistent with world-sheet supersymmetry. We obtain the effective string action resulting from the exact integration over the world-sheet gauge fields to show that it generally describes string models with spontaneous breaking of gauge symmetries with continuous breaking parameters. We examine the question of spacetime supersymmetry spontaneous breaking, and show that breaking with continuous, in particular arbitrarily small breaking parameters does not occur; only breaking for discrete values of parameters is possible. (orig.)

Bifurcation of Jovian magnetotail current sheet

Directory of Open Access Journals (Sweden)

P. L. Israelevich

2006-07-01

Full Text Available Multiple crossings of the magnetotail current sheet by a single spacecraft give the possibility to distinguish between two types of electric current density distribution: single-peaked (Harris type current layer and double-peaked (bifurcated current sheet. Magnetic field measurements in the Jovian magnetic tail by Voyager-2 reveal bifurcation of the tail current sheet. The electric current density possesses a minimum at the point of the Bx-component reversal and two maxima at the distance where the magnetic field strength reaches 50% of its value in the tail lobe.

Key Facts about Tularemia

Science.gov (United States)

... Submit What's this? Submit Button Key Facts About Tularemia Recommend on Facebook Tweet Share Compartir This fact ... and Prevention (CDC) Tularemia Web site . What is Tularemia? Tularemia is a potentially serious illness that occurs ...

Meningitis Myths and Facts

Science.gov (United States)

... Diseases Infographic Prevention and Control of Meningococcal Disease Meningitis Myths and Facts Myth: Meningococcal disease is easy ... infected person, such as shaking hands. Fact: Meningococcal meningitis is spread through air droplets and direct contact ...

Cocaine (Coke, Crack) Facts

Science.gov (United States)

... That People Abuse » Cocaine (Coke, Crack) Facts Cocaine (Coke, Crack) Facts Listen Cocaine is a white ... 69 KB) "My life was built around getting cocaine and getting high." ©istock.com/ Marjot Stacey is ...

78 FR 77447 - California Wind Energy Association, First Solar, Inc. v. California Independent System Operator...

Science.gov (United States)

2013-12-23

... Energy Association, First Solar, Inc. v. California Independent System Operator Corporation, Southern...), California Wind Energy Association and First Solar, Inc. (collectively, Complainants) filed a formal complaint against the California Independent System Operator Corporation (CAISO) and Southern California...

Environmental constraints on West Antarctic ice-sheet formation

Energy Technology Data Exchange (ETDEWEB)

Lindstrom, D R; MacAyeal, D R

1987-01-01

Small perturbations in Antarctic environmental conditions can culminate in the demise of the Antarctic ice sheet's western sector. This may have happened during the last interglacial period, and could recur within the next millennium due to atmospheric warming from trace gas and CO/sub 2/ increases. In this study, we investigate the importance of sea-level, accumulation rate, and ice influx from the East Antarctic ice sheet in the re-establishment of the West Antarctic ice sheet from a thin cover using a time-dependent numerical ice-shelf model. Our results show that a precursor to the West Antarctic ice sheet can form within 3000 years. Sea-level lowering caused by ice-sheet development in the Northern Hemisphere has the greatest environmental influence. Under favorable conditions, ice grounding occurs over all parts of the West Antarctic ice sheet except up-stream of Thwaites Glacier and in the Ross Sea region.

Hydrothermal growth of upright-standing ZnO sheet microcrystals

International Nuclear Information System (INIS)

Shi, Ruixia; Yang, Ping; Dong, Xiaobin; Jia, Changchao; Li, Jia

2014-01-01

Highlights: • Upright-standing ZnO sheet microcrystals were hydrothermally fabricated. • The ZnO sheets were prepared with sodium oxalate at 70 °C without any surfactant. • The preferable adsorption of oxalate anions causes the formation of ZnO sheet. • The continuous growth in six directions leads to the formation of hexagonal sheets. - Abstract: Large-scale upright-standing ZnO sheet microcrystals were fabricated on Zn substrate using sodium oxalate as structure-directing agent by a hydrothermal method at low temperature (70 °C) without any surfactant. The sheets are about 3–5 μm in dimension and 100–300 nm in thickness. The strong and narrow diffraction peaks of ZnO indicate that the sample has a good crystallinity and size. The morphology of sheet-like ZnO varied with the concentrations of sodium oxalate and reaction time. The sheet-like ZnO would transform into rod-like ones when sodium oxalate was substituted by equivalent sodium acetate. The formation of sheet-like ZnO is attributed to the preferable adsorption of oxalate anions on (0 0 0 1) face of ZnO, which inhibits the intrinsic growth of ZnO. Additionally, the continuous growth in six (0 1 −1 0) directions that have the lowest surface energy leads to the formation of hexagonal sheets

12 CFR 615.5211 - Risk categories-balance sheet assets.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Risk categories-balance sheet assets. 615.5211...—balance sheet assets. Section 615.5210(c) specifies certain balance sheet assets that are not assigned to the risk categories set forth below. All other balance sheet assets are assigned to the percentage...

Financial Independence of Central Bank through the Balance Sheet Prism

Directory of Open Access Journals (Sweden)

Ivanović Valentina

2014-05-01

Full Text Available The main reason for central bank independence lies in the fact that it is necessary to clearly distinguish spending money from the ability of making money. Independence of central banks is now a characteristic of almost all developed and highly industrialized countries. In this respect, it represents an essential part of the overall economic reality of these countries. Over the past decade or somewhat earlier, the issue of importance of central bank independence has been raised in developing countries, making the institutional, functional, personal and financial independence of central banks current topics for consideration. The key reason for the growing attention to financial independence of central banks is due to the effects of the global financial crisis on their balance sheets and therefore the challenges related to achieving the basic goals of the functioning of central banks - financial stability and price stability.

The plasma sheet boundary and Ksub(p)

International Nuclear Information System (INIS)

Freeman, J.W.

1975-01-01

Freeman and Maguire (1967) first drew attention to the intrusion of energetic plasma from the tail to the geostationary orbit during geomagnetically disturbed times. Vasyliunas (1968) reported a correlation between the inward extension of the inner boundary of the plasma sheet and the Ksub(p) index and pointed out that the plasma sheet could occasionally reach the geostationary orbit distance. More recently McIlwain (1972) using the more refined detectors aboard the ATS-5 geostationary space-craft, has emphasized the correlation between the location of the plasma sheet boundary along the ATS orbit and geomagnetic activity. Using some older but unpublished data from the Suprathermal Ion Detector aboard the ATS-1 geostationary satellite, the relation between the local time occurrence of the plasma sheet at the geostationary orbit (6.6Rsub(E)) and Ksub(p) index is reported and then a relationship for the shift in the plasma sheet radial position is derived. (Auth.)

Mangold Property Management, Inc. Information Sheet

Science.gov (United States)

Mangold Property Management, Inc. (the Company) is located in Monterey, California. The settlement involves the lease of properties constructed prior to 1978, located in Salinas and Monterey, California.

Surface elevation changes of the greenland ice sheet - results from ESA'S ice sheet CCI

DEFF Research Database (Denmark)

Fredenslund Levinsen, Joanna; Khvorostovky, Kirill; Meister, Rakia

2013-01-01

In order to ensure long-term climate data records for the Greenland Ice Sheet (GIS), ESA have launched the Climate Change Initiative (CCI). This work presents the preliminary steps towards the Ice Sheet CCI's surface elevation change (SEC) derivation using radar altimeter data. In order to find...... the most optimal method, a Round Robin exercise was conducted in which the scientific community was asked to provide their best SEC estimate over the Jakobshavn Isbr drainage basin. The participants used both repeat-track (RT), overlapping footprints, and the cross-over (XO) methods, and both ICESat laser...... and Envisat radar altimeter data were used. Based on this and feedback sheets describing their methods we found that a combination of the RT and XO techniques yielded the best results. In the following, the obtained results will be presented and discussed....

Probability based hydrologic catchments of the Greenland Ice Sheet

Science.gov (United States)

Hudson, B. D.

2015-12-01

Greenland Ice Sheet melt water impacts ice sheet flow dynamics, fjord and coastal circulation, and sediment and biogeochemical fluxes. Melt water exiting the ice sheet also is a key term in its mass balance. Because of this, knowledge of the area of the ice sheet that contributes melt water to a given outlet (its hydrologic catchment) is important to many ice sheet studies and is especially critical to methods using river runoff to assess ice sheet mass balance. Yet uncertainty in delineating ice sheet hydrologic catchments is a problem that is rarely acknowledged. Ice sheet catchments are delineated as a function of both basal and surface topography. While surface topography is well known, basal topography is less certain because it is dependent on radar surveys. Here, I a present a Monte Carlo based approach to delineating ice sheet catchments that quantifies the impact of uncertain basal topography. In this scheme, over many iterations I randomly vary the ice sheet bed elevation within published error bounds (using Morlighem et al., 2014 bed and bed error datasets). For each iteration of ice sheet bed elevation, I calculate the hydraulic potentiometric surface and route water over its path of 'steepest' descent to delineate the catchment. I then use all realizations of the catchment to arrive at a probability map of all major melt water outlets in Greenland. I often find that catchment size is uncertain, with small, random perturbations in basal topography leading to large variations in catchments size. While some catchments are well defined, others can double or halve in size within published basal topography error bars. While some uncertainty will likely always remain, this work points to locations where studies of ice sheet hydrology would be the most successful, allows reinterpretation of past results, and points to where future radar surveys would be most advantageous.

On the balance of stresses in the plasma sheet.

Science.gov (United States)

Rich, F. J.; Wolf, R. A.; Vasyliunas, V. M.

1972-01-01

The stress resulting from magnetic tension on the neutral sheet must, in a steady state, be balanced by any one or a combination of (1) a pressure gradient in the direction along the axis of the tail, (2) a similar gradient of plasma flow kinetic energy, and (3) the tension resulting from a pressure anisotropy within the plasma sheet. Stress balance in the first two cases requires that the ratios h/LX and BZ/BX be of the same order of magnitude, where h is the half-thickness of the neutral sheet, LX is the length scale for variations along the axis of the tail, and BZ and BX are the magnetic field components in the plasma sheet just outside the neutral sheet. The second case requires, in addition, that the plasma flow speed within the neutral sheet be of the order of or larger than the Alfven speed outside the neutral sheet. Stress balance in the third case requires that just outside the neutral sheet the plasma pressure obey the marginal firehose stability condition.

Thermal Transport Properties of Dry Spun Carbon Nanotube Sheets

Directory of Open Access Journals (Sweden)

Heath E. Misak

2016-01-01

Full Text Available The thermal properties of carbon nanotube- (CNT- sheet were explored and compared to copper in this study. The CNT-sheet was made from dry spinning CNTs into a nonwoven sheet. This nonwoven CNT-sheet has anisotropic properties in in-plane and out-of-plane directions. The in-plane direction has much higher thermal conductivity than the out-of-plane direction. The in-plane thermal conductivity was found by thermal flash analysis, and the out-of-plane thermal conductivity was found by a hot disk method. The thermal irradiative properties were examined and compared to thermal transport theory. The CNT-sheet was heated in the vacuum and the temperature was measured with an IR Camera. The heat flux of CNT-sheet was compared to that of copper, and it was found that the CNT-sheet has significantly higher specific heat transfer properties compared to those of copper. CNT-sheet is a potential candidate to replace copper in thermal transport applications where weight is a primary concern such as in the automobile, aircraft, and space industries.

Nonparaxial Bessel and Bessel–Gauss pincers light-sheets

Energy Technology Data Exchange (ETDEWEB)

Mitri, F.G., E-mail: F.G.Mitri@ieee.org

2017-01-23

Highlights: • Bessel and Bessel–Gauss autofocusing light sheets (i.e. beams in 2D) are developed. • The light-sheets are synthesized based on the angular spectrum decomposition method. • Computations of the scattering, radiation force and torque benefit from the solutions. - Abstract: Nonparaxial optical Bessel and Bessel–Gauss pincers optical-sheets are introduced based upon the angular spectrum decomposition in plane waves. The angular spectrum function and the beam-shape coefficients are expressed by means of improper integrals computed numerically. The radiated component of the electric field is also evaluated, displaying unique features of the nonparaxial Bessel pincers light-sheets. This new type of auto-focusing light-sheets finds potential applications in the development of novel methods in optical light-sheet tweezers for particle manipulation in opto-fluidics, particle sizing and imaging. Numerical predictions for the scattering, radiation force and torque, and particle dynamics also benefit from the developed beam solution.

Nonparaxial Bessel and Bessel–Gauss pincers light-sheets

International Nuclear Information System (INIS)

Mitri, F.G.

2017-01-01

Highlights: • Bessel and Bessel–Gauss autofocusing light sheets (i.e. beams in 2D) are developed. • The light-sheets are synthesized based on the angular spectrum decomposition method. • Computations of the scattering, radiation force and torque benefit from the solutions. - Abstract: Nonparaxial optical Bessel and Bessel–Gauss pincers optical-sheets are introduced based upon the angular spectrum decomposition in plane waves. The angular spectrum function and the beam-shape coefficients are expressed by means of improper integrals computed numerically. The radiated component of the electric field is also evaluated, displaying unique features of the nonparaxial Bessel pincers light-sheets. This new type of auto-focusing light-sheets finds potential applications in the development of novel methods in optical light-sheet tweezers for particle manipulation in opto-fluidics, particle sizing and imaging. Numerical predictions for the scattering, radiation force and torque, and particle dynamics also benefit from the developed beam solution.

Fact Sheet: Early Warning Signs of Psychosis

Science.gov (United States)

... items) Social Phobia (1 item) Populations Children and Adolescents (10 items) Men’s Mental Health (5 items) Women’s Mental Health (7 items) Military Service Members (1 item) Older Adults (3 items) Prevention Prevention (2 items) Suicide Prevention (2 items) Research ...

Renewable Energy Policy Fact sheet - United Kingdom

International Nuclear Information System (INIS)

2017-07-01

The EurObserv'ER policy profiles give a snapshot of the renewable energy policy in the EU Member States. In the United Kingdom RES-E are supported through a feed-in tariff, Contracts for Difference scheme, a quota system and tax regulation mechanism. For RES-H and C a subsidy and price-based mechanisms are available for supporting RES-H installations. Furthermore, a quota system for biofuels and a grant scheme for transport is in place. A training programme for RES-E plant installers is in place, as well as a certification programme for RES-E installations. An overarching Renewable Energy Roadmap relating to RES-E has been laid down and implemented

Cerebral Palsy. NICHCY Disability Fact Sheet #2

Science.gov (United States)

National Dissemination Center for Children with Disabilities, 2010

2010-01-01

Cerebral palsy--also known as CP--is a condition caused by injury to the parts of the brain that control the body's ability to use muscles effectively. Often the injury happens before birth, sometimes during delivery or soon after birth. The symptoms will differ from person to person and change as children and their nervous systems mature. This…

Weatherization and Intergovernmental Programs Office Fact Sheet

Energy Technology Data Exchange (ETDEWEB)

None

2018-02-01

One of the Department of Energy’s (DOE) primary forums for helping state and local governments implement costeffective and productive energy systems for American homes, communities, businesses, and industries is the Weatherization and Intergovernmental Programs Office (WIP). WIP is part of DOE’s Office of Energy Efficiency and Renewable Energy’s “all of the above” national energy strategy to create greater energy affordability, security and resiliency.

Fact sheet on fuel manufacturing and utilization

International Nuclear Information System (INIS)

2006-01-01

The Nuclear Fuel Cycle and Materials Section (NFCMS) supports Member States to improve in-pile fuel performance and management of materials; and to develop advanced fuel technologies for ensuring reliability and economic efficiency of the nuclear fuel cycle, provides assistance to Member States to support fuel-manufacturing capability, including quality assurance techniques, optimization of manufacturing parameters and radiation protection, supports the development fuel modeling expertise in Member States, covering both normal operation and postulated and severe accident conditions, provides information and support for the operation of Nuclear Power Plant to ensure that the environment and water chemistry is appropriate for fuel operation, supports fuel failure investigations, including equipment for failed fuel detection and for post-irradiation examination and inspection, as well as fuel repair, provides information and support research into the basic properties of fuel materials, including UO2, MOX, (Th, Pu)O2, (Th, U233)O2 fuels and zirconium alloy cladding and fuel assembly components and offers guidance on the relationship with back-end requirement (interim storage, transport, reprocessing, disposal), fuel utilization and management, MOX fuels, alternative fuels and advanced fuel technology and materials, economic and other aspects of nuclear fuel use (e.g. environmental impact). Recently NFCMS provided support to a Member State manufacturing Gadolinia doped fuel and provided in-mast sipping equipment to a Nuclear Power Plant to allow the determination of fuel failure. Member States interested in fuel performance and manufacture should contact the Technical Cooperation Department of the Agency and Member States interested in knowing more about the Agency's programme on source management should contact: C. Ganguly, Section Head, V. Inozemtsev, J. Killeen

Gnome-Coach, New Mexico Site Fact Sheet

International Nuclear Information System (INIS)

2009-01-01

The Gnome-Coach Site is located in southern Eddy County, New Mexico, 11 miles east of the Pecos River and 25 miles southeast of the city of Carlsbad. The site is approximately 680 acres. The land is currently withdrawn from all forms of disposition under the public land laws, including U.S. mining laws and leasing under mineral leasing laws. On December 10, 1961, a 3-kiloton-yield nuclear device was detonated at a depth of 1,183 feet below ground surface in a thick, bedded salt deposit within the Salado Formation.

Renewable Energy Policy Fact sheet - Czech Republic

International Nuclear Information System (INIS)

2017-09-01

The EurObserv'ER policy profiles give a snapshot of the renewable energy policy in the EU Member States. For electricity from renewable sources of energy main support instruments are feed-in tariffs (FIPs) and feed-in premiums (FiPs). Operators of renewable energy installation have to make a choice for either the applicable FiT or the corresponding FiP. Except for hydro installations with a capacity of 10 MW, the FiT/FiP scheme has been closed for new installations generating electricity from renewables. Hydro power installations with a size ≤ 10 MW are also eligible for subsidies. Installations for production of renewable heat can apply for subsidies granted by the European Regional Development Fund (ERDF) and are exempt from real estate tax. A renewable heating obligation for buildings is in place and a regulation on the use of renewable heating by public authorities. The main support scheme for renewable transport fuels is a renewable transport quota scheme. This scheme obliges companies importing or producing gasoline or automotive diesel to ensure that bio-fuels make up a defined percentage of their overall annual sales volume of automotive fuels. Besides, bio-fuels are exempt from a consumption tax

Potential health hazards of radiation. Fact Sheet

International Nuclear Information System (INIS)

2009-01-01

During World War II and the Cold War, the federal government developed and operated industrial facilities for the research, production, and testing of nuclear weapons, as well as other scientific and engineering research. These processes left a legacy of radioactive and chemical waste, environmental contamination, and hazardous facilities and materials at well over 100 sites. Some of these sites processed uranium and vanadium, and upon closure, left behind millions of cubic yards of mill tailings on the sites and throughout the nearby communities. The U.S. Department of Energy (DOE) administers the cleanup of these areas to minimize the risks to the public and environment from exposure to the tailings and the radon gas they produce

Extravehicular Activity Fact Sheet: An EVA Chronology

Data.gov (United States)

National Aeronautics and Space Administration — Walking to Olympus: An EVA Chronology chronicles the 154 EVAs conducted from March 1965 to April 1997. It is intended to make clear the crucial role played by EVA in...

Clean Energy Solutions Center Services (Fact Sheet)

Energy Technology Data Exchange (ETDEWEB)

2014-04-01

The Clean Energy Solutions Center (Solutions Center) helps governments, advisors and analysts create policies and programs that advance the deployment of clean energy technologies. The Solutions Center partners with international organizations to provide online training, expert assistance, and technical resources on clean energy policy.

Young Children in Deep Poverty. Fact Sheet

Science.gov (United States)

Ekono, Mercedes; Jiang, Yang; Smith, Sheila

2016-01-01

A U.S. family of three living in deep poverty survives on an annual income below $9,276, or less than $9.00 a day per family member. The struggle to raise children on such a meager income is not a rare circumstance among U.S. families, especially those with young children. Currently, 11 percent of young children (0-9 years) live in households with…

Renewable Energy Policy Fact sheet - European Union

International Nuclear Information System (INIS)

2017-09-01

The EurObserv'ER policy profiles give a snapshot of the renewable energy policy in the EU Member States. The European Union aims to achieve a 20% share (with legally binding national targets) of its final energy consumption from RES by 2020, and at least a 27% share (not broken down into nationally binding targets) by 2030. Key instruments at EU level to promote RES include directives, such as the 2009 Renewable Energy Directive. The EU Emission Trading Scheme (ETS) is also intended to support RES. The European Commission has also adopted state aid guidelines to ensure that support schemes to promote RES at national level are compatible with EU competition law and internal market rules. Further instruments are research, development and innovation funding programmes, such as Horizon2020, the Innovation Fund, and the NER300 programme. RES are also supported through regional development funds as well as through grants and loans for RES projects and related infrastructure from the European Investment Bank (EIB) and the European Fund for Strategic Investments (EFSI). A recast directive on the promotion of RES in the period 2020- 2030 is to be adopted along with governance rules to ensure that the EU-wide RES target for 2030 is met