WorldWideScience

Sample records for facies analysis applied

  1. Seismic facies; Facies sismicas

    Johann, Paulo Roberto Schroeder [PETROBRAS, Rio de Janeiro, RJ (Brazil). Exploracao e Producao Corporativo. Gerencia de Reservas e Reservatorios]. E-mail: johann@petrobras.com.br

    2004-11-01

    The method presented herein describes the seismic facies as representations of curves and vertical matrixes of the lithotypes proportions. The seismic facies are greatly interested in capturing the spatial distributions (3D) of regionalized variables, as for example, lithotypes, sedimentary facies groups and/ or porosity and/or other properties of the reservoirs and integrate them into the 3D geological modeling (Johann, 1997). Thus when interpreted as curves or vertical matrixes of proportions, seismic facies allow us to build a very important tool for structural analysis of regionalized variables. The matrixes have an important application in geostatistical modeling. In addition, this approach provides results about the depth and scale of the wells profiles, that is, seismic data is integrated to the characterization of reservoirs in depth maps and in high resolution maps. The link between the different necessary technical phases involved in the classification of the segments of seismic traces is described herein in groups of predefined traces of two approaches: a) not supervised and b) supervised by the geological knowledge available on the studied reservoir. The multivariate statistical methods used to obtain the maps of the seismic facies units are interesting tools to be used to provide a lithostratigraphic and petrophysical understanding of a petroleum reservoir. In the case studied these seismic facies units are interpreted as representative of the depositional system as a part of the Namorado Turbiditic System, Namorado Field, Campos Basin.Within the scope of PRAVAP 19 (Programa Estrategico de Recuperacao Avancada de Petroleo - Strategic Program of Advanced Petroleum Recovery) some research work on algorithms is underway to select new optimized attributes to apply seismic facies. One example is the extraction of attributes based on the wavelet transformation and on the time-frequency analysis methodology. PRAVAP is also carrying out research work on an

  2. PROBLEMS AND METHODOLOGY OF THE PETROLOGIC ANALYSIS OF COAL FACIES.

    Chao, Edward C.T.

    1983-01-01

    This condensed synthesis gives a broad outline of the methodology of coal facies analysis, procedures for constructing sedimentation and geochemical formation curves, and micro- and macrostratigraphic analysis. The hypothetical coal bed profile has a 3-fold cycle of material characteristics. Based on studies of other similar profiles of the same coal bed, and on field studies of the sedimentary rock types and their facies interpretation, one can assume that the 3-fold subdivision is of regional significance.

  3. Fluvial facies reservoir productivity prediction method based on principal component analysis and artificial neural network

    Pengyu Gao

    2016-03-01

    Full Text Available It is difficult to forecast the well productivity because of the complexity of vertical and horizontal developments in fluvial facies reservoir. This paper proposes a method based on Principal Component Analysis and Artificial Neural Network to predict well productivity of fluvial facies reservoir. The method summarizes the statistical reservoir factors and engineering factors that affect the well productivity, extracts information by applying the principal component analysis method and approximates arbitrary functions of the neural network to realize an accurate and efficient prediction on the fluvial facies reservoir well productivity. This method provides an effective way for forecasting the productivity of fluvial facies reservoir which is affected by multi-factors and complex mechanism. The study result shows that this method is a practical, effective, accurate and indirect productivity forecast method and is suitable for field application.

  4. Unsupervised seismic facies analysis with spatial constraints using regularized fuzzy c-means

    Song, Chengyun; Liu, Zhining; Cai, Hanpeng; Wang, Yaojun; Li, Xingming; Hu, Guangmin

    2017-12-01

    Seismic facies analysis techniques combine classification algorithms and seismic attributes to generate a map that describes main reservoir heterogeneities. However, most of the current classification algorithms only view the seismic attributes as isolated data regardless of their spatial locations, and the resulting map is generally sensitive to noise. In this paper, a regularized fuzzy c-means (RegFCM) algorithm is used for unsupervised seismic facies analysis. Due to the regularized term of the RegFCM algorithm, the data whose adjacent locations belong to same classification will play a more important role in the iterative process than other data. Therefore, this method can reduce the effect of seismic data noise presented in discontinuous regions. The synthetic data with different signal/noise values are used to demonstrate the noise tolerance ability of the RegFCM algorithm. Meanwhile, the fuzzy factor, the neighbour window size and the regularized weight are tested using various values, to provide a reference of how to set these parameters. The new approach is also applied to a real seismic data set from the F3 block of the Netherlands. The results show improved spatial continuity, with clear facies boundaries and channel morphology, which reveals that the method is an effective seismic facies analysis tool.

  5. Trace fossil analysis of lacustrine facies and basins

    Buatois, L.A.; Mangano, M.G.

    1998-01-01

    Two ichnofacies are typical of lacustrine depositional systems. The Scoyenia ichnofacies characterizes transitional terrestrial/nonmarine aquatic substrates, periodically inundated or desiccated, and therefore is commonly present in lake margin facies. The Mermia ichnofacies is associated with well oxygenated, permanent subaqueous, fine-grained substrates of hydrologically open, perennial lakes. Bathymetric zonations within the Mermia ichnofacies are complicated by the wide variability of lacustrine systems. Detected proximal-distal trends are useful within particular lake basins, but commonly difficult to extrapolate to other lakes. Other potential ichnofacies include the typically marine Skolithos ichnofacies for high-energy zones of lakes and substrate-controlled, still unnamed ichnofacies, associated to lake margin deposits. Trace fossils are useful for sedimentologic analysis of event beds. Lacustrine turbidites are characterized by low-diversity suites, reflecting colonization by opportunistic organisms after the turbidite event. Underflow current beds record animal activity contemporaneous with nearly continuous sedimentation. Ichnologic studies may also help to distinguish between marine and lacustrine turbidites. Deep-marine turbidites host the Nereites ichnofacies that consists of high diversity of ornate grazing traces and graphoglyptids, recording highly specialized feeding strategies developed to solve the problem of the scarcity of food in the deep sea. Deep lacustrine environments contain the Mermia ichnofacies, which is dominated by unspecialized grazing and feeding traces probably related to the abundance and accessibility of food in lacustrine systems. The lower diversity of lacustrine ichnofaunas in comparison with deep-sea assemblages more likely reflects lower species diversity as a consequence of less stable conditions. Increase of depth and extent of bioturbation through geologic time produced a clear signature in the ichnofabric record of

  6. Applying and improving a sedimentary facies model for exploration of stratigraphic traps in the Austrian Molasse basin

    Hinsch, R.; Kofler, N. [Rohoel-Aufsuchungs AG (RAG), Vienna (Austria); Hubbard, S. [Calgary Univ., Calgary (Canada). Dept. of Geology and Geophysics

    2007-09-13

    In the Molasse foreland basin of Upper Austria gas is produced from deep-water sandstones and conglomerates of the Puchkirchen and basal Hall formations (Oligocene-Lower Miocene). The basin is mature, with >750 wells drilled by RAG to date. An extensive 3-D seismic reflection dataset that covers much of the paleo-basin foredeep has been acquired in the study area over the last 15 years. Seismic stratigraphic analysis has revealed that deepwater sedimentation in the basin was dominated by a channel belt up to 5 km wide that transported sediment derived from the Central and Eastern Alps eastward along the basin axis (Linzer, 2001; de Ruig, 2003). Based on these findings, a detailed sedimentary facies model has been developed, outlining several distinct depositional elements that reveal numerous possible stratigraphic trap types (de Ruig and Hubbard, 2006). This depositional model is currently being applied and tested in exploration and refined by ongoing research. Channel abandonment and migration are important processes that resulted in stratigraphic configurations consisting of coarse-grained sandstones and conglomerates overlain by channel and overbank mudstones. This represents ideal reservoir architecture, including porous reservoir facies sealed by impermeable deposits. Additional stratigraphic trapping conditions can result from special spatial arrangements of depositional elements, for example a sandstone-filled tributary channel that is sealed by an overlying mudstone-filled abandonment channel. Recognizing and further improving such stratigraphic trapping configurations are important for future exploration in Upper Austria, where most of the structural traps have been drilled. (orig.)

  7. Facies analysis of an Upper Jurassic carbonate platform for geothermal reservoir characterization

    von Hartmann, Hartwig; Buness, Hermann; Dussel, Michael

    2017-04-01

    The Upper Jurassic Carbonate platform in Southern Germany is an important aquifer for the production of geothermal energy. Several successful projects were realized during the last years. 3D-seismic surveying has been established as a standard method for reservoir analysis and the definition of well paths. A project funded by the federal ministry of economic affairs and energy (BMWi) started in 2015 is a milestone for an exclusively regenerative heat energy supply of Munich. A 3D-seismic survey of 170 square kilometer was acquired and a scientific program was established to analyze the facies distribution within the area (http://www.liag-hannover.de/en/fsp/ge/geoparamol.html). Targets are primarily fault zones where one expect higher flow rates than within the undisturbed carbonate sediments. However, since a dense net of geothermal plants and wells will not always find appropriate fault areas, the reservoir properties should be analyzed in more detail, e.g. changing the viewpoint to karst features and facies distribution. Actual facies interpretation concepts are based on the alternation of massif and layered carbonates. Because of successive erosion of the ancient land surfaces, the interpretation of reefs, being an important target, is often difficult. We found that seismic sequence stratigraphy can explain the distribution of seismic pattern and improves the analysis of different facies. We supported this method by applying wavelet transformation of seismic data. The splitting of the seismic signal into successive parts of different bandwidths, especially the frequency content of the seismic signal, changed by tuning or dispersion, is extracted. The combination of different frequencies reveals a partition of the platform laterally as well as vertically. A cluster analysis of the wavelet coefficients further improves this picture. The interpretation shows a division into ramp, inner platform and trough, which were shifted locally and overprinted in time by other

  8. Facies analysis and paleoenvironments of the upper cretaceous ...

    The Bida Basin is located in central Nigeria and it is perpendicular to the main axis of the Benue Trough. Due to its large areal extent and facies variation, the basin is often geographically divided into northern and southern Bida Basins. Whereas, aspects of the mineral resource and sedimentation history of the sediments in ...

  9. Facies and facies architecture and depositional environments of the ...

    Facies and facies architecture and depositional environments of the ... PROMOTING ACCESS TO AFRICAN RESEARCH ... Depositional environments of the Yolde Formation were studied based on the analysis of facies and facies architecture. ... Senegal (6); Sierra Leone (1); South Africa (96); South Sudan (1); Sudan (3) ...

  10. Facies analysis of tuffaceous volcaniclastics and felsic volcanics of Tadpatri Formation, Cuddapah basin, Andhra Pradesh, India

    Goswami, Sukanta; Dey, Sukanta

    2018-05-01

    The felsic volcanics, tuff and volcaniclastic rocks within the Tadpatri Formation of Proterozoic Cuddapah basin are not extensively studied so far. It is necessary to evaluate the extrusive environment of felsic lavas with associated ash fall tuffs and define the resedimented volcaniclastic components. The spatial and temporal bimodal association were addressed, but geochemical and petrographic studies of mafic volcanics are paid more attention so far. The limited exposures of eroded felsic volcanics and tuffaceous volcaniclastic components in this terrain are highly altered and that is the challenge of the present facies analysis. Based on field observation and mapping of different lithounits a number of facies are categorized. Unbiased lithogeochemical sampling have provided major and selective trace element data to characterize facies types. Thin-section studies are also carried out to interpret different syn- and post- volcanic features. The facies analysis are used to prepare a representative facies model to visualize the entire phenomenon with reference to the basin evolution. Different devitrification features and other textural as well as structural attributes typical of flow, surge and ash fall deposits are manifested in the middle, lower and upper stratigraphic levels. Spatial and temporal correlation of lithologs are also supportive of bimodal volcanism. Felsic and mafic lavas are interpreted to have erupted through the N-S trending rift-associated fissures due to lithospheric stretching during late Palaeoproterozoic. It is also established from the facies model that the volcaniclastics were deposited in the deeper part of the basin in the east. The rifting and associated pressure release must have provided suitable condition of decompression melting at shallow depth with high geothermal gradient and this partial melting of mantle derived material at lower crust must have produced mafic magmas. Such upwelling into cold crust also caused partial heat

  11. Pore facies analysis: incorporation of rock properties into pore geometry based classes in a Permo-Triassic carbonate reservoir in the Persian Gulf

    Rahimpour-Bonab, H; Aliakbardoust, E

    2014-01-01

    Pore facies analysis is a useful method for the classification of reservoir rocks according to pore geometry characteristics. The importance of this method is related to the dependence of the dynamic behaviour of the reservoir rock on the pore geometry. In this study, pore facies analysis was performed by the quantification and classification of the mercury injection capillary pressure (MICP) curves applying the multi-resolution graph-based clustering (MRGC) method. Each pore facies includes a limited variety of rock samples with different depositional fabrics and diagenetic histories, which are representative of one type of pore geometry. The present pore geometry is the result of the interaction between the primary rock fabric and its diagenetic overprint. Thus the variations in petrographic properties can be correlated with the pore geometry characteristics. Accordingly, the controlling parameters in the pore geometry characteristics were revealed by detailed petrographic analysis in each pore facies. The reservoir rock samples were then classified using the determined petrographic properties which control the pore system quality. This method is proposed for the classification of reservoir rocks in complicated carbonate reservoirs, in order to reduce the incompatibility of traditional facies analysis with pore system characteristics. The method is applicable where enough capillary pressure data is not available. (papers)

  12. Facies analysis and paleoenvironmental reconstruction of Upper Cretaceous sequences in the eastern Para-Tethys Basin, NW Iran

    Omidvar, M.; Safari, A.; Vaziri-Moghaddam, H.; Ghalavand, H.

    2016-07-01

    Upper Cretaceous mixed carbonate-siliciclastic sequences are among the most important targets for hydrocarbon exploration in the Moghan area, located in the eastern Para-Tethys Basin. Despite of their significance, little is known about their facies characteristics and depositional environments. Detailed facies analysis and paleoenvironmental reconstruction of these sequences have been carried out in eight surface sections. Accordingly, four siliciclastic facies, eight carbonate facies and one volcanic facies have been recognized. Detailed facies descriptions and interpretations, together with the results of facies frequency analysis, standard facies models and Upper Cretaceous depositional models of Para-Tethys Basin, have been integrated and a non-rimmed carbonate platform is presented. This platform was affected by siliciclastic influx, in the form of coastal fan delta and submarine fans in the shallow- to deep-marine parts, respectively. This model is interpreted to be shallower in the central and northeastern parts of the Moghan area. Toward the southeast and southwest, this shallow platform turns into deep marine settings along steep slopes without remarkable marginal barriers. (Author)

  13. Neural net generated seismic facies map and attribute facies map

    Addy, S.K.; Neri, P.

    1998-01-01

    The usefulness of 'seismic facies maps' in the analysis of an Upper Wilcox channel system in a 3-D survey shot by CGG in 1995 in Lavaca county in south Texas was discussed. A neural net-generated seismic facies map is a quick hydrocarbon exploration tool that can be applied regionally as well as on a prospect scale. The new technology is used to classify a constant interval parallel to a horizon in a 3-D seismic volume based on the shape of the wiggle traces using a neural network technology. The tool makes it possible to interpret sedimentary features of a petroleum deposit. The same technology can be used in regional mapping by making 'attribute facies maps' in which various forms of amplitude attributes, phase attributes or frequency attributes can be used

  14. Seismic facies analysis from pre-stack data using self-organizing maps

    Kourki, Meysam; Ali Riahi, Mohammad

    2014-01-01

    In facies analysis, seismic data are clustered in different groups. Each group represents subsurface points with similar physical properties. Different groups can be related to differences in lithology, physical properties of rocks and fluid changes in the rocks. The supervised and unsupervised data clustering are known as two types of clustering architecture. In supervised clustering, the number of clusters is predefined, while in unsupervised clustering, a collection of patterns partitions into groups without predefined clusters. In this study, the pre-stack data clustering is used for seismic facies analysis. In this way, a horizon was selected from pre-stack data, followed by sorting of data using offset. A trace associated with each CDP is constructed, for which the first and second samples are related to the first and second offsets, respectively. The created trace is called consolidated trace which is characteristic of subsurface points. These consolidated traces are clustered by using self-organizing maps (SOM). In proposed pre-stack seismic data clustering, points with similar physical properties are placed in one cluster. Seismic data associated with hydrocarbon reservoirs have very different characteristics that are easily recognized. The efficiency of the proposed method was tested on both synthetic and real seismic data. The results showed that the algorithm improves the data classification and the points of different properties are noticeable in final maps. (paper)

  15. Stratigraphy and Facies Analysis of a 122 M Long Lacustrine Sequence from Chalco Lake, Central Mexico

    Herrera, D. A.; Ortega, B.; Caballero, M.; Lozano, S.; Pi, T.; Brown, E. T.

    2010-12-01

    Chalco lake is located SE of the outskirts of Mexico City, at the central part of the Trans Mexican Volcanic Belt. Previous studies show the importance of this lacustrine sequence as an archive of paleoenvironmental and paleoclimatic changes. A set of five cores up to 122 m depth were drilled in the basin, in order to analyze the sedimentary record and to extent the previous knowledge of past environmental changes in central Mexico. As an initial step, in this work we present the identification and classification of sedimentary facies. Preliminary paleomagnetism analyses recognize the possible record of the Blake Event (ca. 120 kyr BP), and suggest that the sequence might span the last 240 kyr. In this case, variations in sedimentary facies could reflect the conditions of the MIS 1-7. The facies are mostly diatom ooze, carbonate mud, organic rich silt and volcaniclastic, both massive and laminated, and massive dark gray to reddish brown silt. From 1 to 8 m depth dominates the organic rich silt facies, which correlates with the MIS 1. Intercalations of reddish brown and grayish brown silt facies, between 8 to 60 m depth, indicate changes occurred during MIS 2 to 5d. Between 60-75 m depth the sequence is characterized by dark grayish silty clay facies, which possibly coincide with the MIS 5e. At 79 m depth (ca. 130 kyr BP) we found struvite (MgNH4PO4.6H2O), which may be related to dry conditions. The laminated diatom ooze facies dominates between 90 to 122 m depth and indicates rhythmic changes in the sediment deposition of the basin. The volcaniclastic facies is represented by lapilli and ash deposits in more than 100 individual tephra layers of both mafic and felsic composition. Some of them correspond to main volcanic eruptions, as the Upper Toluca Pumice (13,500 cal yr BP), from the Nevado de Toluca volcano and the Pómez con Andesita (17,700 cal yr BP) from the Popocatépetl volcano. The carbonate mud facies is composed of calcite and siderite, with frequent

  16. Handbook of Applied Analysis

    Papageorgiou, Nikolaos S

    2009-01-01

    Offers an examination of important theoretical methods and procedures in applied analysis. This book details the important theoretical trends in nonlinear analysis and applications to different fields. It is suitable for those working on nonlinear analysis.

  17. Fluoride characterization by principal component analysis in the hydrochemical facies of Serra Geral Aquifer System in Southern Brazil

    Arthur Nanni

    2008-12-01

    Full Text Available Principal component analysis is applied to 309 groundwater chemical data information from wells in the Serra Geral Aquifer System. Correlations among seven hydrochemical parameters are statistically examined. A four-component model is suggested and explains 81% of total variance. Component 1 represents calcium-magnesium bicarbonated groundwaters with long time of residence. Component 2 represents sulfated and chlorinated calcium and sodium groundwaters; Component 3 represents sodium bicarbonated groundwaters; and Component 4 is characterized by sodium sulfated with high fluoride facies. The components' spatial distribution shows high fluoride concentration along analyzed tectonic fault system and aligned on northeast direction in other areas, suggesting other hydrogeological fault systems. High fluoride concentration increases according to groundwater pumping depth. The Principal Component Analysis reveals features of the groundwater mixture and individualizes water facies. In this scenery, it can be determined hydrogeological blocks associated with tectonic fault system here introduced.A Análise de Componentes Principais foi aplicada em 309 dados químicos de águas subterrâneas de poços do Sistema Aqüífero Serra Geral. Correlações entre sete parâmetros hidroquímicos foram examinadas através da estatística. O modelo de quatro componentes foi utilizado por explicar 81% da variância total. A Componente 1 é representada por águas cálcio-magnesianas com longo tempo de residência, a Componente 2 representa águas bicarbonatadas sulfatadas e cloretadas, a Componente 3 representa águas bicarbonatadas sódicas e a Componente 4 é caracterizada por águas de fácies sódica e sulfatada com alto fluoreto. A distribuição espacial das componentes mostra águas com concentrações anômalas ao longo dos sistemas tectônicos de falhas, analisados e alinhados a NE em algumas áreas, sugerindo outros sistemas de falhas hidrogeológicos. As

  18. Facies analysis, depositional environments and paleoclimate of the Cretaceous Bima Formation in the Gongola Sub - Basin, Northern Benue Trough, NE Nigeria

    Shettima, B.; Abubakar, M. B.; Kuku, A.; Haruna, A. I.

    2018-01-01

    Facies analysis of the Cretaceous Bima Formation in the Gongola Sub -basin of the Northern Benue Trough northeastern Nigeria indicated that the Lower Bima Member is composed of alluvial fan and braided river facies associations. The alluvial fan depositional environment dominantly consists of debris flow facies that commonly occur as matrix supported conglomerate. This facies is locally associated with grain supported conglomerate and mudstone facies, representing sieve channel and mud flow deposits respectively, and these deposits may account for the proximal alluvial fan region of the Lower Bima Member. The distal fan facies were represented by gravel-bed braided river system of probably Scot - type model. This grade into sandy braided river systems with well developed floodplains facies, forming probably at the lowermost portion of the alluvial fan depositional gradient, where it inter-fingers with basinal facies. In the Middle Bima Member, the facies architecture is dominantly suggestive of deep perennial sand-bed braided river system with thickly developed amalgamated trough crossbedded sandstone facies fining to mudstone. Couplets of shallow channels are also locally common, attesting to the varying topography of the basin. The Upper Bima Member is characterized by shallow perennial sand-bed braided river system composed of successive succession of planar and trough crossbedded sandstone facies associations, and shallower channels of the flashy ephemeral sheetflood sand - bed river systems defined by interbedded succession of small scale trough crossbedded sandstone facies and parallel laminated sandstone facies. The overall stacking pattern of the facies succession of the Bima Formation in the Gongola Sub - basin is generally thinning and fining upwards cycles, indicating scarp retreat and deposition in a relatively passive margin setting. Dominance of kaolinite in the clay mineral fraction of the Bima Formation points to predominance of humid sub - tropical

  19. Applied longitudinal analysis

    Fitzmaurice, Garrett M; Ware, James H

    2012-01-01

    Praise for the First Edition "". . . [this book] should be on the shelf of everyone interested in . . . longitudinal data analysis.""-Journal of the American Statistical Association   Features newly developed topics and applications of the analysis of longitudinal data Applied Longitudinal Analysis, Second Edition presents modern methods for analyzing data from longitudinal studies and now features the latest state-of-the-art techniques. The book emphasizes practical, rather than theoretical, aspects of methods for the analysis of diverse types of lo

  20. Syn-sedimentary tectonics and facies analysis in a rift setting: Cretaceous Dalmiapuram Formation, Cauvery Basin, SE India

    Nivedita Chakraborty

    2018-04-01

    transgressive systems tract motif to grow eventually passing upwards into the Karai Shale Formation, whose contact with the Dalmiapuram Formation is gradational. Keywords: Syn-sedimentary tectonics, Facies analysis, Carbonate shelf, Cretaceous, Dalmiapuram Formation, Cauvery Basin

  1. Applied Behavior Analysis

    Szapacs, Cindy

    2006-01-01

    Teaching strategies that work for typically developing children often do not work for those diagnosed with an autism spectrum disorder. However, teaching strategies that work for children with autism do work for typically developing children. In this article, the author explains how the principles and concepts of Applied Behavior Analysis can be…

  2. Facies analysis, sedimentology and paleocurrent of the quaternary nenering formation, Pengkalan Hulu, Malaysia

    Yuniarti Ulfa; Evonne Hooi Rong Yu; Ooi Cheng Kit

    2014-01-01

    Nenering Formation is essentially made up of semi-consolidated sediments, which are divided into basal conglomerate beds, conglomeratic sandstone, cross-bedded sandstone, and siltstone to muddy layers facies. It is overlie unconformable to the Berapit Formation, but conformable to the Kroh and Grik Formations. The stratigraphy of Nenering Formation is a fining upwards sequence where the thickness of conglomerate beds become thinner upwards and become thicker for conglomeratic sandstone. The thickness varies from 0.5 m to tenths of meters. The more sandy in the upper portion (cross-bedded sandstone) overlie with thin siltstone and mud stone facies. The clast and grain composition suggested that the material making up the sedimentary sequence were derived predominantly from the erosion of granitoid rocks and sedimentary and metamorphic rocks constitute a minor provenance. Imbrications and the trend sizes of clasts indicate that the paleo-current flow toward northeast. Cross bedding that was found in conglomerate and sandstone indicates the main channel depositional environment. The sequence stratigraphy of this area match with the Saskatchewan fluvial braided channel model. (author)

  3. Applied multivariate statistical analysis

    Härdle, Wolfgang Karl

    2015-01-01

    Focusing on high-dimensional applications, this 4th edition presents the tools and concepts used in multivariate data analysis in a style that is also accessible for non-mathematicians and practitioners.  It surveys the basic principles and emphasizes both exploratory and inferential statistics; a new chapter on Variable Selection (Lasso, SCAD and Elastic Net) has also been added.  All chapters include practical exercises that highlight applications in different multivariate data analysis fields: in quantitative financial studies, where the joint dynamics of assets are observed; in medicine, where recorded observations of subjects in different locations form the basis for reliable diagnoses and medication; and in quantitative marketing, where consumers’ preferences are collected in order to construct models of consumer behavior.  All of these examples involve high to ultra-high dimensions and represent a number of major fields in big data analysis. The fourth edition of this book on Applied Multivariate ...

  4. Artificial neural network modeling and cluster analysis for organic facies and burial history estimation using well log data: A case study of the South Pars Gas Field, Persian Gulf, Iran

    Alizadeh, Bahram; Najjari, Saeid; Kadkhodaie-Ilkhchi, Ali

    2012-08-01

    Intelligent and statistical techniques were used to extract the hidden organic facies from well log responses in the Giant South Pars Gas Field, Persian Gulf, Iran. Kazhdomi Formation of Mid-Cretaceous and Kangan-Dalan Formations of Permo-Triassic Data were used for this purpose. Initially GR, SGR, CGR, THOR, POTA, NPHI and DT logs were applied to model the relationship between wireline logs and Total Organic Carbon (TOC) content using Artificial Neural Networks (ANN). The correlation coefficient (R2) between the measured and ANN predicted TOC equals to 89%. The performance of the model is measured by the Mean Squared Error function, which does not exceed 0.0073. Using Cluster Analysis technique and creating a binary hierarchical cluster tree the constructed TOC column of each formation was clustered into 5 organic facies according to their geochemical similarity. Later a second model with the accuracy of 84% was created by ANN to determine the specified clusters (facies) directly from well logs for quick cluster recognition in other wells of the studied field. Each created facies was correlated to its appropriate burial history curve. Hence each and every facies of a formation could be scrutinized separately and directly from its well logs, demonstrating the time and depth of oil or gas generation. Therefore potential production zone of Kazhdomi probable source rock and Kangan- Dalan reservoir formation could be identified while well logging operations (especially in LWD cases) were in progress. This could reduce uncertainty and save plenty of time and cost for oil industries and aid in the successful implementation of exploration and exploitation plans.

  5. Acoustic Impedance Inversion To Identify Oligo-Miocene Carbonate Facies As Reservoir At Kangean Offshore Area

    Zuli Purnama, Arif; Ariyani Machmud, Pritta; Eka Nurcahya, Budi; Yusro, Miftahul; Gunawan, Agung; Rahmadi, Dicky

    2018-03-01

    Model based inversion was applied to inversion process of 2D seismic data in Kangean Offshore Area. Integration acoustic impedance from wells and seismic data was expected showing physical property, facies separation and reservoir quality of carbonate rock, particularly in Kangean Offshore Area. Quantitative and qualitative analysis has been conducted on the inversion results to characterize the carbonate reservoir part of Kujung and correlate it to depositional facies type. Main target exploration in Kangean Offshore Area is Kujung Formation (Oligo-Miocene Carbonate). The type of reservoir in this area generate from reef growing on the platform. Carbonate rock is a reservoir which has various type and scale of porosity. Facies determination is required to to predict reservoir quality, because each facies has its own porosity value. Acoustic impedance is used to identify and characterize Kujung carbonate facies, also could be used to predict the distribution of porosity. Low acoustic impedance correlated with packstone facies that has acoustic impedance value below 7400 gr/cc*m/s. In other situation, high acoustic impedance characterized by wackestone facies above 7400 gr/cc*m/s. The interpretation result indicated that Kujung carbonate rock dominated by packstone facies in the upper part of build-up and it has ideal porosity for hydrocarbon reservoir.

  6. Stratigraphy, facies analysis and depositional environments of the Upper Unit of Abu Roash "E" member in the Abu Gharadig field, Western Desert, Egypt

    Hewaidy, Abdel Galil; Elshahat, O. R.; Kamal, Samy

    2018-03-01

    Abu Roach "E" member is of an important hydrocarbon reservoir-producing horizon in the Abu Gharadig Field (north Western Desert, Egypt). This study is used to build facies analysis and depositional environments model for the Upper Unit of the Abu Roash "E" member in Abu Gharadig Field. This target has been achieved throughout the sedimentological, wire line logs, lithostratigraphic and biostratigraphic analyses of more than 528 feet cores. The high-resolution biostratigraphic analysis provides a calibration for the paleo-bathymetry and depositional environmental interpretations. Biozonation and lithostratigraphic markers are used to constrain stratigraphic correlation. Integration between the core description and petorographic microfacies analysis by microscope examination provide an excellent indication for the rock types and depositional environments. Five depositional facies types are detected including carbonate inner ramp, tidal flats, tidal channels, supra-tidal and tide dominated delta facies. This model helps in the understanding of the Upper Unit of Abu Roash "E" member reservoir distribution as well as lateral and vertical facies changes that contribute to the development strategy for the remaining hydrocarbon reserves for this important oil reservoir.

  7. Applied functional analysis

    Oden, J Tinsley

    2010-01-01

    The textbook is designed to drive a crash course for beginning graduate students majoring in something besides mathematics, introducing mathematical foundations that lead to classical results in functional analysis. More specifically, Oden and Demkowicz want to prepare students to learn the variational theory of partial differential equations, distributions, and Sobolev spaces and numerical analysis with an emphasis on finite element methods. The 1996 first edition has been used in a rather intensive two-semester course. -Book News, June 2010

  8. Applied functional analysis

    Griffel, DH

    2002-01-01

    A stimulating introductory text, this volume examines many important applications of functional analysis to mechanics, fluid mechanics, diffusive growth, and approximation. Detailed enough to impart a thorough understanding, the text is also sufficiently straightforward for those unfamiliar with abstract analysis. Its four-part treatment begins with distribution theory and discussions of Green's functions. Essentially independent of the preceding material, the second and third parts deal with Banach spaces, Hilbert space, spectral theory, and variational techniques. The final part outlines the

  9. Eclogite facies rocks

    Carswell, D. A

    1990-01-01

    .... This is the first volume to provide a coherent and comprehensive review of the conditions necessary for the formation of eclogites and eclogite facies rocks and assemblages, and a detailed account...

  10. Facies Analysis and Sequence Stratigraphy of Missole Outcrops: N’Kapa Formation of the South-Eastern Edge of Douala Sub-Basin (Cameroon)

    Kwetche , Paul; Ntamak-Nida , Marie Joseph; Nitcheu , Adrien Lamire Djomeni; Etame , Jacques; Owono , François Mvondo; Mbesse , Cecile Olive; Kissaaka , Joseph Bertrand Iboum; Ngon , Gilbert Ngon; Bourquin , Sylvie; Bilong , Paul

    2018-01-01

    International audience; Missole facies description and sequence stratigraphy analysis allow a new proposal of depositional environments of the Douala sub-basin eastern part. The sediments of Missole outcrops (N’kapa Formation) correspond to fluvial/tidal channel to shallow shelf deposits with in some place embayment deposits within a warm and semi-arid climate. Integrated sedimentologic, palynologic and mineralogical data document a comprehensive sequence stratigraphy of this part of the Doua...

  11. Basin analysis in the Southern Tethyan margin: Facies sequences, stratal pattern and subsidence history highlight extension-to-inversion processes in the Cretaceous Panormide carbonate platform (NW Sicily)

    Basilone, Luca; Sulli, Attilio

    2018-01-01

    In the Mediterranean, the South-Tethys paleomargin experienced polyphased tectonic episodes and paleoenvironmental perturbations during Mesozoic time. The Cretaceous shallow-water carbonate successions of the Panormide platform, outcropping in the northern edge of the Palermo Mountains (NW Sicily), were studied by integrating facies and stratal pattern with backstripping analysis to recognize the tectonics vs. carbonate sedimentation interaction. The features of the Requienid limestone, including geometric configuration, facies sequence, lithological changes and significance of the top-unconformity, highlight that at the end of the Lower Cretaceous the carbonate platform was tectonically dismembered in various rotating fault-blocks. The variable trends of the subsidence curves testify to different responses, both uplift and downthrow, of various platform-blocks impacted by extensional tectonics. Physical stratigraphic and facies analysis of the Rudistid limestone highlight that during the Upper Cretaceous the previously carbonate platform faulted-blocks were subjected to vertical movements in the direction opposite to the displacement produced by the extensional tectonics, indicating a positive tectonic inversion. Comparisons with other sectors of the Southern Tethyan and Adria paleomargins indicate that during the Cretaceous these areas underwent the same extensional and compressional stages occurring in the Panormide carbonate platform, suggesting a regional scale significance, in time and kinematics, for these tectonic events.

  12. Deposits related to supercritical flows in glacifluvial deltas and subaqueous ice-contact fans: Integrating facies analysis and ground-penetrating radar

    Lang, Joerg; Sievers, Julian; Loewer, Markus; Igel, Jan; Winsemann, Jutta

    2017-04-01

    Bedforms related to supercritical flows have recently received much interest and the understanding of flow morphodynamics and depositional processes has been greatly advanced. However, outcrop studies of these bedforms are commonly hampered by their long wavelengths. Therefore, we combined outcrop-based facies analysis with extensive ground-penetrating radar (GPR) measurements. Different GPR antennas (200, 400 and 1500 MHz) were utilised to measure both long profiles and densely spaced grids in order to map the large-scale facies architecture and image the three-dimensional geometry of the deposits. The studied delta and subaqueous ice-contact fan successions were deposited within ice-dammed lakes, which formed along the margins of the Middle Pleistocene Scandinavian ice sheets across Northern Germany. These glacilacustrine depositional systems are characterised by high aggradation rates due to the rapid expansion and deceleration of high-energy sediment-laden flows, favouring the preservation of bedforms related to supercritical flows. In flow direction, delta foresets commonly display lenticular scours, which are 2 to 6 m wide and 0.15 to 0.5 m deep. Characteristically, scours are filled by upslope dipping backsets, consisting of pebbly sand. In a few cases, massive and deformed strata were observed, passing upflow into backsets. Across flow, scours are 2 to 3 m wide and typically display a concentric infill. The scour fills are commonly associated with subhorizontally or sinusoidal stratified pebbly sand. These facies types are interpreted as deposits of cyclic steps and antidunes, respectively, representing deposition from supercritical density flows, which formed during high meltwater discharge events or regressive slope failures (Winsemann et al., in review). The GPR-sections show that the scour fills form trains along the delta foresets, which can be traced for up to 15 m. The studied subaqueous ice-contact fan succession relates to the zone of flow

  13. Conversation Analysis in Applied Linguistics

    Kasper, Gabriele; Wagner, Johannes

    2014-01-01

    on applied CA, the application of basic CA's principles, methods, and findings to the study of social domains and practices that are interactionally constituted. We consider three strands—foundational, social problem oriented, and institutional applied CA—before turning to recent developments in CA research...... on learning and development. In conclusion, we address some emerging themes in the relationship of CA and applied linguistics, including the role of multilingualism, standard social science methods as research objects, CA's potential for direct social intervention, and increasing efforts to complement CA......For the last decade, conversation analysis (CA) has increasingly contributed to several established fields in applied linguistics. In this article, we will discuss its methodological contributions. The article distinguishes between basic and applied CA. Basic CA is a sociological endeavor concerned...

  14. Applied analysis and differential equations

    Cârj, Ovidiu

    2007-01-01

    This volume contains refereed research articles written by experts in the field of applied analysis, differential equations and related topics. Well-known leading mathematicians worldwide and prominent young scientists cover a diverse range of topics, including the most exciting recent developments. A broad range of topics of recent interest are treated: existence, uniqueness, viability, asymptotic stability, viscosity solutions, controllability and numerical analysis for ODE, PDE and stochastic equations. The scope of the book is wide, ranging from pure mathematics to various applied fields such as classical mechanics, biomedicine, and population dynamics.

  15. Applied survival analysis using R

    Moore, Dirk F

    2016-01-01

    Applied Survival Analysis Using R covers the main principles of survival analysis, gives examples of how it is applied, and teaches how to put those principles to use to analyze data using R as a vehicle. Survival data, where the primary outcome is time to a specific event, arise in many areas of biomedical research, including clinical trials, epidemiological studies, and studies of animals. Many survival methods are extensions of techniques used in linear regression and categorical data, while other aspects of this field are unique to survival data. This text employs numerous actual examples to illustrate survival curve estimation, comparison of survivals of different groups, proper accounting for censoring and truncation, model variable selection, and residual analysis. Because explaining survival analysis requires more advanced mathematics than many other statistical topics, this book is organized with basic concepts and most frequently used procedures covered in earlier chapters, with more advanced topics...

  16. Sequence Stratigraphic Analysis and Facies Architecture of the Cretaceous Mancos Shale on and Near the Jicarilla Apache Indian Reservation, New Mexico-their relation to Sites of Oil Accumulation; FINAL

    Ridgley, Jennie

    2001-01-01

    The purpose of phase 1 and phase 2 of the Department of Energy funded project Analysis of oil- bearing Cretaceous Sandstone Hydrocarbon Reservoirs, exclusive of the Dakota Sandstone, on the Jicarilla Apache Indian Reservation, New Mexico was to define the facies of the oil producing units within the Mancos Shale and interpret the depositional environments of these facies within a sequence stratigraphic context. The focus of this report will center on (1) redefinition of the area and vertical extent of the ''Gallup sandstone'' or El Vado Sandstone Member of the Mancos Shale, (2) determination of the facies distribution within the ''Gallup sandstone'' and other oil-producing sandstones within the lower Mancos, placing these facies within the overall depositional history of the San Juan Basin, (3) application of the principals of sequence stratigraphy to the depositional units that comprise the Mancos Shale, and (4) evaluation of the structural features on the Reservation as they may control sites of oil accumulation

  17. Statistics and Title VII Proof: Prima Facie Case and Rebuttal.

    Whitten, David

    1978-01-01

    The method and means by which statistics can raise a prima facie case of Title VII violation are analyzed. A standard is identified that can be applied to determine whether a statistical disparity is sufficient to shift the burden to the employer to rebut a prima facie case of discrimination. (LBH)

  18. Sedimentary facies analysis of the Mesozoic clastic rocks in Southern Peru (Tacna, 18°S): Towards a paleoenvironmental Redefinition and stratigraphic Reorganization

    Alván, Aldo; Jacay, Javier; Caracciolo, Luca; Sánchez, Elvis; Trinidad, Inés

    2018-07-01

    The Mesozoic rocks of southern Peru comprise a Middle Jurassic to Early Cretaceous sedimentary sequence deposited during a time interval of approximately 34 Myr. In Tacna, these rocks are detrital and constitute the Yura Group (Callovian to Tithonian) and the Hualhuani Formation (Berriasian). Basing on robust interpretation of facies and petrographic analysis, we reconstruct the depositional settings of such units and provide a refined stratigraphic framework. Accordingly, nine types of sedimentary facies and six architectural elements are defined. They preserve the record of a progradational fluvial system, in which two styless regulated the dispersion of sediments: (i) a high-to moderate-sinuosity meandering setting (Yura Group), and a later (ii) incipient braided setting (Hualhuani Formation). The Yura Group (Callovian-Tithonian) represents the onset of floodplain deposits and lateral accretion of point-bar deposits sited on a semi-flat topography. Nonetheless, the progradational sequence was affected by at least two rapid marine ingressions occurred during Middle Callovian and Tithonian times. Such marine ingressions reveal the proximity of a shallow marine setting and incipient carbonate deposition. In response to increase in topographic gradient, the Hualhuani Formation (Berriasian) deposited as extensive multistory sandy channels. The mineralogy of the Mesozoic sediments suggests sediment supplies and intense recycling from a craton interior (i.e. Amazon Craton and/or plutonic sources) located eastward of the study area.

  19. Modern problems in applied analysis

    Rogosin, Sergei

    2018-01-01

    This book features a collection of recent findings in Applied Real and Complex Analysis that were presented at the 3rd International Conference “Boundary Value Problems, Functional Equations and Applications” (BAF-3), held in Rzeszow, Poland on 20-23 April 2016. The contributions presented here develop a technique related to the scope of the workshop and touching on the fields of differential and functional equations, complex and real analysis, with a special emphasis on topics related to boundary value problems. Further, the papers discuss various applications of the technique, mainly in solid mechanics (crack propagation, conductivity of composite materials), biomechanics (viscoelastic behavior of the periodontal ligament, modeling of swarms) and fluid dynamics (Stokes and Brinkman type flows, Hele-Shaw type flows). The book is addressed to all readers who are interested in the development and application of innovative research results that can help solve theoretical and real-world problems.

  20. Holocene facies analysis of the sedimentary record with anthropogenic impacts in the Ria de Vigo (NW Spain)

    Rubio, B.; Garcia-Gil, S.; Vilas, F.; Garcia, A.

    2004-05-01

    The Ria de Vigo constitutes the southernmost ria of the Rias Bajas. The reconnaisance studies of this ria indicate a heterogeneous distribution of both terrigenous and carbonate sediments with a major axial deposit of cohesive sediments. These fine sediments are relatively rich in organic matter, particularly in the inner part of the ria. This is the result of a progressive change in hydrodynamic conditions along the ria. The outer parts are affected by severe storms in winter and by upwelling processes in summer, whilst the inner parts have an estuarine character throughout the year. The upwelling produces a marked increase in the biological productivity in the Ria and, consequently, these sediments have typically very high contents of organic matter. In recent years, increasing interest has been shown in the levels of heavy metals in sediments of the Galician Rias. Particularly, some of these studies showed a higher concentration of heavy metals in the muddiest surficial sediments in the Ria de Vigo. However, and despite of the important human and industrial settlement in the Galician rias, knowledge about the evolution of historical contamination along the Holocene sedimentary record is scarce. In order to ascertain this evolution have been selected 8 gravity corer located along the axial part of the ria. This evaluation was focused on the muddy sediments of the axial part of the ria due to the dependence of metal levels on grain size, resulting from the association of metals with the finer particles, as it has been demonstrated by previous studies in the ria. On these sediments, the combination of geochemical, mineralogical and sedimentological data, facies interpretations (obtained from x-ray radiography), and their integration with high resolution seismic data (Uniboom and 3.5 Khz subbottom profiler) have allowed to establish the evolution of certain heavy metals (Zn, Cu and Pb) along the Holocene recent sedimentary record in the Ria de Vigo. Sediments in the

  1. A new ‘superassemblage’ model explaining proximal-to-distal and lateral facies changes in fluvial environments, based on the Proterozoic Sanjauli Formation (Lesser Himalaya, India

    Ananya Mukhopadhyay

    2016-09-01

    Full Text Available Facies analysis of fluvial deposits of the Proterozoic Sanjauli Formation in the Lesser Himalaya was combined with an architectural analysis. On this basis, a model was developed that may be applied to other fluvial systems as well, whether old or recent. The new model, which might be considered as an assemblage of previous models, explains lateral variations in architecture and facies but is not in all respects consistent with the standard fluvial models. The Sanjauli fluvial model is unique in that it deals with lateral facies variations due to shifts of the base-level along with fluctuations in accommodation space owing to changes in palaeoclimate.

  2. Facies Constrained Elastic Full Waveform Inversion

    Zhang, Z.

    2017-05-26

    Current efforts to utilize full waveform inversion (FWI) as a tool beyond acoustic imaging applications, for example for reservoir analysis, face inherent limitations on resolution and also on the potential trade-off between elastic model parameters. Adding rock physics constraints does help to mitigate these issues. However, current approaches to add such constraints are based on averaged type rock physics regularization terms. Since the true earth model consists of different facies, averaging over those facies naturally leads to smoothed models. To overcome this, we propose a novel way to utilize facies based constraints in elastic FWI. A so-called confidence map is calculated and updated at each iteration of the inversion using both the inverted models and the prior information. The numerical example shows that the proposed method can reduce the cross-talks and also can improve the resolution of inverted elastic properties.

  3. Facies Constrained Elastic Full Waveform Inversion

    Zhang, Z.; Zabihi Naeini, E.; Alkhalifah, Tariq Ali

    2017-01-01

    Current efforts to utilize full waveform inversion (FWI) as a tool beyond acoustic imaging applications, for example for reservoir analysis, face inherent limitations on resolution and also on the potential trade-off between elastic model parameters. Adding rock physics constraints does help to mitigate these issues. However, current approaches to add such constraints are based on averaged type rock physics regularization terms. Since the true earth model consists of different facies, averaging over those facies naturally leads to smoothed models. To overcome this, we propose a novel way to utilize facies based constraints in elastic FWI. A so-called confidence map is calculated and updated at each iteration of the inversion using both the inverted models and the prior information. The numerical example shows that the proposed method can reduce the cross-talks and also can improve the resolution of inverted elastic properties.

  4. Conversation Analysis and Applied Linguistics.

    Schegloff, Emanuel A.; Koshik, Irene; Jacoby, Sally; Olsher, David

    2002-01-01

    Offers biographical guidance on several major areas of conversation-analytic work--turn-taking, repair, and word selection--and indicates past or potential points of contact with applied linguistics. Also discusses areas of applied linguistic work. (Author/VWL)

  5. Emplacement mechanisms of contrasting debris avalanches at Volcán Mombacho (Nicaragua), provided by structural and facies analysis

    Shea, Thomas; van Wyk de Vries, Benjamin; Pilato, Martín

    2008-07-01

    We study the lithology, structure, and emplacement of two debris-avalanche deposits (DADs) with contrasting origins and materials from the Quaternary-Holocene Mombacho Volcano, Nicaragua. A clear comparison is possible because both DADs were emplaced onto similar nearly flat (3° slope) topography with no apparent barrier to transport. This lack of confinement allows us to study, in nature, the perfect case scenario of a freely spreading avalanche. In addition, there is good evidence that no substratum was incorporated in the events during flow, so facies changes are related only to internal dynamics. Mombacho shows evidence of at least three large flank collapses, producing the two well-preserved debris avalanches of this study; one on its northern flank, “Las Isletas,” directed northeast, and the other on its southern flank, “El Crater,” directed south. Other south-eastern features indicate that the debris-avalanche corresponding to the third collapse (La Danta) occurred before Las Isletas and El Crater events. The materials involved in each event were similar, except in their alteration state and in the amount of substrata initially included in the collapse. While “El Crater” avalanche shows no signs of substratum involvement and has characteristics of a hydrothermal weakening-related collapse, the “Las Isletas” avalanche involves significant substratum and was generated by gravity spreading-related failure. The latter avalanche may have interacted with Lake Nicaragua during transport, in which case its run-out could have been modified. Through a detailed morphological and structural description of the Mombacho avalanches, we provide two contrasting examples of non-eruptive volcanic flank collapse. We show that, remarkably, even with two distinct collapse mechanisms, the debris avalanches developed the same gross stratigraphy of a coarse layer above a fine layer. This fine layer provided a low friction basal slide layer. Whereas DAD layering and

  6. Remote sensing, planform, and facies analysis of the Plain of Tineh, Egypt for the remains of the defunct Pelusiac River

    Quintanar, Jessica; Khan, Shuhab D.; Fathy, Mohamed S.; Zalat, Abdel-Fattah A.

    2013-11-01

    The Pelusiac Branch was a distributary river in the Nile Delta that splits off from the main trunk of the Nile River as it flowed toward the Mediterranean. At approximately 25 A.D., it was chocked by sand and silt deposits from prograding beach accretion processes. The lower course of the river and its bifurcation point from the trunk of the Nile have been hypothesized based on ancient texts and maps, as well as previous research, but results have been inconsistent. Previous studies partly mapped the lower course of the Pelusiac River in the Plain of Tineh, east of the Suez Canal, but rapid urbanization related to the inauguration of the Peace Canal mega-irrigation project has covered any trace of the linear feature reported by these previous studies. The present study used multispectral remote sensing data of GeoEYE-1 and Landsat-TM to locate and accurately map the course of the defunct Pelusiac River within the Plain of Tineh. Remote sensing analysis identified a linear feature that is 135 m wide at its maximum and approximately 13 km long. It extends from the Pelusium ruins to the Suez Canal, just north of the Peace Canal. This remotely located linear feature corresponds to the path of the Pelusiac River during Roman times. Planform geomorphology was applied to determine the hydrological regime and paleodischarge of the river prior to becoming defunct. Planform analysis derived a bankfull paleodischarge value of ~ 5700 m3 s- 1 and an average discharge of 650 m3 s- 1, using the reach average for the interpreted Pelusiac River. The derived values show a river distributary similar in discharge to the modern dammed Damietta river. Field work completed in April of 2012 derived four sedimentary lithofacies of the upper formation on the plain that included pro-delta, delta-front and delta-plain depositional environments. Diatom and fossil mollusk samples were also identified that support coastal beach and lagoonal environments of deposition. Measured section columns

  7. Applying critical analysis - main methods

    Miguel Araujo Alonso

    2012-02-01

    Full Text Available What is the usefulness of critical appraisal of literature? Critical analysis is a fundamental condition for the correct interpretation of any study that is subject to review. In epidemiology, in order to learn how to read a publication, we must be able to analyze it critically. Critical analysis allows us to check whether a study fulfills certain previously established methodological inclusion and exclusion criteria. This is frequently used in conducting systematic reviews although eligibility criteria are generally limited to the study design. Critical analysis of literature and be done implicitly while reading an article, as in reading for personal interest, or can be conducted in a structured manner, using explicit and previously established criteria. The latter is done when formally reviewing a topic.

  8. Essentials of applied dynamic analysis

    Jia, Junbo

    2014-01-01

    This book presents up-to-date knowledge of dynamic analysis in engineering world. To facilitate the understanding of the topics by readers with various backgrounds, general principles are linked to their applications from different angles. Special interesting topics such as statistics of motions and loading, damping modeling and measurement, nonlinear dynamics, fatigue assessment, vibration and buckling under axial loading, structural health monitoring, human body vibrations, and vehicle-structure interactions etc., are also presented. The target readers include industry professionals in civil, marine and mechanical engineering, as well as researchers and students in this area.

  9. Applied systems analysis. No. 22

    1980-12-01

    Based on a detailed analysis of demands in the area Cologne/Frankfurt, the amount of the system products for this region were ascertained, which under consideration of technical conditions and entrepreneurial aspects seemed to be disposable at cost equality with competative energy supplies. Based on these data, the technical components of the system, location and piping were fixed and first- and operating costs were determined. For a judgement of the economics, the key numbers, cash value, internal rate of interest and cost recovery rate were determined from the difference of costs between the nuclear long distance energy system and alternative facilities. Furthermore specific production cost, associated prices and contribution margin were presented for each product. (orig.) [de

  10. Las facies Keuper al SW de la provincia de Soria

    Hernando, S.

    1988-08-01

    Full Text Available This paper deals with the sedimentological analysis of the materials that correspond to the Keuper facies in the area situated between the Iberian Ranges and the Central System. Acording to the obtained data, two main aspects are emphasized: - During the Upper Triassic, a c1ear retreat of the roast line towards the East took place, since this area constituted the litoral zone during the sedimentation of the Rot and Muschelkalk. - Facies change lateraly from West to East as proximal alluvial Can sediments pass into facies interpreted as distal alluvial fans and continental sabkha environment.Se analizan, desde el punto de vista sedimentológico, unos materiales correspondientes a las facies Keuper entre la Cordillera Ibérica y el Sistema Central. Dos aspectos resaltan tras este análisis: - Desplazamiento de la línea de costa (que durante la sedimentación del Rot y del Muschelkalk estaba situada en esta zona hacia el Este. - Marcado cambio lateral de facies desde el Oeste hacia el Este, pasando de unas facies proximales-medias de abanico aluvial a unas facies distales y ambiente de sabkha continental.

  11. Obligaciones prima facie y derrotabilidad

    Oller, Carlos A.

    2006-01-01

    Este artículo examina algunos de los problemas que presenta el tratamiento lógico de las obligaciones prima facie en la obra de Carlos Alchourrón. Por una parte, señalaremos que su sistema para los condicionales derrotables DFT no formaliza adecuadamente la noción intuitiva de condición contribuyente que Alchourrón utiliza para elucidar la de condicional derrotable. Por otra parte, argumentaremos que la noción de deber prima facie de David Ross no queda adecuadamente formalizada en el sistema...

  12. Spectral properties and ASTER-based alteration mapping of Masahim volcano facies, SE Iran

    Tayebi, Mohammad H.; Tangestani, Majid H.; Vincent, Robert K.; Neal, Devin

    2014-10-01

    This study applies Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) data and the Mixture Tuned Matched Filtering (MTMF) algorithm to map the sub-pixel distribution of alteration minerals associated with the Masahim volcano, SE Iran for understanding the spatial relationship between alteration minerals and volcano facies. Investigations of the alteration mineralogy were conducted using field-spectroscopy, X-ray diffraction (XRD) analysis and ASTER Short Wave Infrared (SWIR) spectral data. In order to spectrally characterize the stratovolcano deposits, lithological units and alteration minerals, the volcano was divided into three facies: the Central, Proximal, and Medial-distal facies. The reflectance spectra of rock samples show absorption features of a number of minerals including white mica, kaolinite, montmorillonite, illite, goethite, hematite, jarosite, opal, and chlorite. The end-members of key alteration minerals including sericite (phyllic zone), kaolinite (argillic zone) and chlorite (propylitic zone) were extracted from imagery using the Pixel Purity Index (PPI) method and were used to map alteration minerals. Accuracy assessment through field observations was used to verify the fraction maps. The results showed that most prominent altered rocks situated at the central facies of volcano. The alteration minerals were discriminated with the coefficient of determination (R2) of 0.74, 0.81, and 0.68 for kaolinite, sericite, and chlorite, respectively. The results of this study have the potential to refine the map of alteration zones in the Masahim volcano.

  13. Facies analysis of the Balta Formation: Evidence for a large late Miocene fluvio-deltaic system in the East Carpathian Foreland

    Matoshko, Anton; Matoshko, Andrei; de Leeuw, Arjan; Stoica, Marius

    2016-08-01

    Deposits of the Balta Fm are preserved in a large arcuate sediment body that covers about 60,000 km2 and is up to 350 m thick. The Balta Fm spans ca. 5 Ma as constrained by underlying Tortonian (Bessarabian) and overlying Messinian (early Pontian) Paratethys strata. It contains frequent terrestrial mammal fossils and fresh- as well as brackish-water (Paratethys) molluscs and ostracods. Over the past 140 years our understanding of the sedimentary architecture of the formation and its origins has remained in its infancy, which has limited insight into the evolution of the East Carpathian Foreland. Here, we provide the first modern sedimentary facies analysis of the Balta Fm, which is integrated with an extensive review of previously published local literature. It is supported with micropalaeontological results and a wealth of historical borehole information. We show that the Balta Fm has a tripartite vertical division. Its lowermost part is clay dominated and consists of subordinate delta front sand bodies interspersed between muds. The middle unit contains separate delta plain channels or channel belts encased in thick muds. These are overlain by a unit with amalgamated delta plain channel deposits with only minor amounts of associated mud. The abundance of upper flow regime sedimentary structures in channel sands, the absence of peats (or coals) and the presence of calcareous nodules suggest a strongly seasonal and relatively dry climate with a flashy discharge regime. Deposition of the Balta Fm in an area previously characterized by distal shelf and prodelta environments indicates large-scale progradation triggered by high sediment volume from the uplifting Carpathian Orogen and enhanced by a general lowering of Paratethys sea-level. The tripartite internal architecture of the Balta Fm indicates that progradation continued during deposition. Its wedge-shaped geometry suggests that tectonic activity in the Carpathians generated a 300 km wide foreland basin that

  14. Applied Behavior Analysis and Statistical Process Control?

    Hopkins, B. L.

    1995-01-01

    Incorporating statistical process control (SPC) methods into applied behavior analysis is discussed. It is claimed that SPC methods would likely reduce applied behavior analysts' intimate contacts with problems and would likely yield poor treatment and research decisions. Cases and data presented by Pfadt and Wheeler (1995) are cited as examples.…

  15. Detailed facies analysis of the Upper Cretaceous Tununk Shale Member, Henry Mountains Region, Utah: Implications for mudstone depositional models in epicontinental seas

    Li, Zhiyang; Schieber, Juergen

    2018-02-01

    Lower-Middle Turonian strata of the Tununk Shale Member of the greater Mancos Shale were deposited along the western margin of the Cretaceous Western Interior Seaway during the Greenhorn second-order sea level cycle. In order to examine depositional controls on facies development in this mudstone-rich succession, this study delineates temporal and spatial relationships in a process-sedimentologic-based approach. The 3-dimensional expression of mudstone facies associations and their stratal architecture is assessed through a fully integrative physical and biologic characterization as exposed in outcrops in south-central Utah. Sedimentologic characteristics from the millimeter- to kilometer-scale are documented in order to fully address the complex nature of sediment transport mechanisms observed in this shelf muddy environment. The resulting facies model developed from this characterization consists of a stack of four lithofacies packages including: 1) carbonate-bearing, silty and sandy mudstone (CSSM), 2) silt-bearing, calcareous mudstone (SCM), 3) carbonate-bearing, silty mudstone to muddy siltstone (CMS), and 4) non-calcareous, silty and sandy mudstone (SSM). Spatial and temporal variations in lithofacies type and sedimentary facies characteristics indicate that the depositional environments of the Tununk Shale shifted in response to the 2nd-order Greenhorn transgressive-regressive sea-level cycle. During this eustatic event, the Tununk shows a characteristic vertical shift from distal middle shelf to outer shelf (CSSM to SCM facies), then from outer shelf to inner shelf environment (SCM to CMS, and to SSM facies). Shifting depositional environments, as well as changes in dominant paleocurrent direction throughout this succession, indicate multiple source areas and transport mechanisms (i.e. longshore currents, offshore-directed underflows, storm reworking). This study provides a rare documentation of the Greenhorn cycle as exposed across the entire shelf setting

  16. Concept analysis of culture applied to nursing.

    Marzilli, Colleen

    2014-01-01

    Culture is an important concept, especially when applied to nursing. A concept analysis of culture is essential to understanding the meaning of the word. This article applies Rodgers' (2000) concept analysis template and provides a definition of the word culture as it applies to nursing practice. This article supplies examples of the concept of culture to aid the reader in understanding its application to nursing and includes a case study demonstrating components of culture that must be respected and included when providing health care.

  17. Caldwell University's Department of Applied Behavior Analysis.

    Reeve, Kenneth F; Reeve, Sharon A

    2016-05-01

    Since 2004, faculty members at Caldwell University have developed three successful graduate programs in Applied Behavior Analysis (i.e., PhD, MA, non-degree programs), increased program faculty from two to six members, developed and operated an on-campus autism center, and begun a stand-alone Applied Behavior Analysis Department. This paper outlines a number of strategies used to advance these initiatives, including those associated with an extensive public relations campaign. We also outline challenges that have limited our programs' growth. These strategies, along with a consideration of potential challenges, might prove useful in guiding academicians who are interested in starting their own programs in behavior analysis.

  18. Applied regression analysis a research tool

    Pantula, Sastry; Dickey, David

    1998-01-01

    Least squares estimation, when used appropriately, is a powerful research tool. A deeper understanding of the regression concepts is essential for achieving optimal benefits from a least squares analysis. This book builds on the fundamentals of statistical methods and provides appropriate concepts that will allow a scientist to use least squares as an effective research tool. Applied Regression Analysis is aimed at the scientist who wishes to gain a working knowledge of regression analysis. The basic purpose of this book is to develop an understanding of least squares and related statistical methods without becoming excessively mathematical. It is the outgrowth of more than 30 years of consulting experience with scientists and many years of teaching an applied regression course to graduate students. Applied Regression Analysis serves as an excellent text for a service course on regression for non-statisticians and as a reference for researchers. It also provides a bridge between a two-semester introduction to...

  19. Building an applied activation analysis centre

    Bartosek, J.; Kasparec, I.; Masek, J.

    1972-01-01

    Requirements are defined and all available background material is reported and discussed for the building up of a centre of applied activation analysis in Czechoslovakia. A detailed analysis of potential users and the centre's envisaged availability is also presented as part of the submitted study. A brief economic analysis is annexed. The study covers the situation up to the end of 1972. (J.K.)

  20. Lessons learned in applying function analysis

    Mitchel, G.R.; Davey, E.; Basso, R.

    2001-01-01

    This paper summarizes the lessons learned in undertaking and applying function analysis based on the recent experience of utility, AECL and international design and assessment projects. Function analysis is an analytical technique that can be used to characterize and asses the functions of a system and is widely recognized as an essential component of a 'systematic' approach to design, on that integrated operational and user requirements into the standard design process. (author)

  1. Positive Behavior Support and Applied Behavior Analysis

    Johnston, J. M.; Foxx, R. M.; Jacobson, J. W.; Green, G.; Mulick, J. A.

    2006-01-01

    This article reviews the origins and characteristics of the positive behavior support (PBS) movement and examines those features in the context of the field of applied behavior analysis (ABA). We raise a number of concerns about PBS as an approach to delivery of behavioral services and its impact on how ABA is viewed by those in human services. We…

  2. Applied Behavior Analysis: Beyond Discrete Trial Teaching

    Steege, Mark W.; Mace, F. Charles; Perry, Lora; Longenecker, Harold

    2007-01-01

    We discuss the problem of autism-specific special education programs representing themselves as Applied Behavior Analysis (ABA) programs when the only ABA intervention employed is Discrete Trial Teaching (DTT), and often for limited portions of the school day. Although DTT has many advantages to recommend its use, it is not well suited to teach…

  3. Delineation of geological facies from poorly differentiated data

    Wohlberg, Brendt [Los Alamos National Laboratory; Tartakovsky, Daniel [UCSC

    2008-01-01

    The ability to delineate geologic facies and to estima.te their properties from sparse data is essential for modeling physical and biochemical processes occurring in the 'ubsurface. If such data are poorly differentiated, this challcnrring task is complicated further by the absence of a clear distinction between different hydrofacies even at locations where data. are available. vVe consider three alt mative approaches for analysis of poorly differentiated data: a k-means clU!:iterinrr algorithm, an expectation-maximization algorithm, and a minimum-variance algorithm. Two distinct synthetically generated geological settings are used to r:tnalyze the ability of these algorithmti to as ign accurately the membership of such data in a given geologic facies. On average, the minimum-variance algorithm provides a more robust p rformance than its two counterparts and when combined with a nearest-neighbor algorithm, it also yields the most accurate reconstruction of the boundaries between the facies.

  4. Applied decision analysis and risk evaluation

    Ferse, W.; Kruber, S.

    1995-01-01

    During 1994 the workgroup 'Applied Decision Analysis and Risk Evaluation; continued the work on the knowledge based decision support system XUMA-GEFA for the evaluation of the hazard potential of contaminated sites. Additionally a new research direction was started which aims at the support of a later stage of the treatment of contaminated sites: The clean-up decision. For the support of decisions arising at this stage, the methods of decision analysis will be used. Computational aids for evaluation and decision support were implemented and a case study at a waste disposal site in Saxony which turns out to be a danger for the surrounding groundwater ressource was initiated. (orig.)

  5. Facies and depositional environments for the coquinas of the Morro do Chaves Formation, Sergipe-Alagoas Basin, defined by taphonomic and compositional criteria

    Ana Carolina Tavares

    Full Text Available Lacustrine carbonate rocks form important hydrocarbon accumulations along the Brazilian continental margin, some of which are contained in oil fields in which coquinas are one of the main reservoirs (viz. Campos Basin. The complexity and heterogeneity of these deposits make them a challenge in terms of reservoir description. For the necessary classification and paleoenvironmental interpretation of the coquinas, it is essential to evaluate many aspects including biological (such as carbonate productivity, sedimentological (energy regime in the depositional environment, transport of bioclasts, terrigenous supply, taphonomic (fragmentation of shells, abrasion and diagenetic processes. The facies analysis applied in this study is considered a more appropriate classification approach to understand these coquinas, since it is more flexible and comprehensive than the existing classifications for carbonate rocks. The material investigated here consists of rock samples of the coquinas from the Atol Quarry of the Morro do Chaves Formation (Barremian/Aptian, Sergipe-Alagoas Basin. These rocks that crop out in the Atol quarry complex can be considered as a case study for similar coquinas reservoirs found in the Brazilian continental margin basins. Six sedimentary facies were described, using the main taphonomic (fragmentation of shells and compositional (presence of micrite and siliciclastic matrix features as a diagnostic criteria. Two carbonate facies, two mixed carbonate-siliciclastic facies and two siliciclastic facies (mudstones were identified. From the facies succession, combined with a review of the literature on the subject, the following depositional paleoenvironments were defined: high-energy lake platform, lacustrine delta in a high-energy lake platform and lake-centre. In this paper, a new facies model for the studied coquinas succession is proposed.

  6. Applied research in uncertainty modeling and analysis

    Ayyub, Bilal

    2005-01-01

    Uncertainty has been a concern to engineers, managers, and scientists for many years. For a long time uncertainty has been considered synonymous with random, stochastic, statistic, or probabilistic. Since the early sixties views on uncertainty have become more heterogeneous. In the past forty years numerous tools that model uncertainty, above and beyond statistics, have been proposed by several engineers and scientists. The tool/method to model uncertainty in a specific context should really be chosen by considering the features of the phenomenon under consideration, not independent of what is known about the system and what causes uncertainty. In this fascinating overview of the field, the authors provide broad coverage of uncertainty analysis/modeling and its application. Applied Research in Uncertainty Modeling and Analysis presents the perspectives of various researchers and practitioners on uncertainty analysis and modeling outside their own fields and domain expertise. Rather than focusing explicitly on...

  7. Strategic decision analysis applied to borehole seismology

    Menke, M.M.; Paulsson, B.N.P.

    1994-01-01

    Strategic Decision Analysis (SDA) is the evolving body of knowledge on how to achieve high quality in the decision that shapes an organization's future. SDA comprises philosophy, process concepts, methodology, and tools for making good decisions. It specifically incorporates many concepts and tools from economic evaluation and risk analysis. Chevron Petroleum Technology Company (CPTC) has applied SDA to evaluate and prioritize a number of its most important and most uncertain R and D projects, including borehole seismology. Before SDA, there were significant issues and concerns about the value to CPTC of continuing to work on borehole seismology. The SDA process created a cross-functional team of experts to structure and evaluate this project. A credible economic model was developed, discrete risks and continuous uncertainties were assessed, and an extensive sensitivity analysis was performed. The results, even applied to a very restricted drilling program for a few years, were good enough to demonstrate the value of continuing the project. This paper explains the SDA philosophy concepts, and process and demonstrates the methodology and tools using the borehole seismology project example. SDA is useful in the upstream industry not just in the R and D/technology decisions, but also in major exploration and production decisions. Since a major challenge for upstream companies today is to create and realize value, the SDA approach should have a very broad applicability

  8. Functional Data Analysis Applied in Chemometrics

    Muller, Martha

    nutritional status and metabolic phenotype. We want to understand how metabolomic spectra can be analysed using functional data analysis to detect the in uence of dierent factors on specic metabolites. These factors can include, for example, gender, diet culture or dietary intervention. In Paper I we apply...... representation of each spectrum. Subset selection of wavelet coecients generates the input to mixed models. Mixed-model methodology enables us to take the study design into account while modelling covariates. Bootstrap-based inference preserves the correlation structure between curves and enables the estimation...

  9. Applied spectrophotometry: analysis of a biochemical mixture.

    Trumbo, Toni A; Schultz, Emeric; Borland, Michael G; Pugh, Michael Eugene

    2013-01-01

    Spectrophotometric analysis is essential for determining biomolecule concentration of a solution and is employed ubiquitously in biochemistry and molecular biology. The application of the Beer-Lambert-Bouguer Lawis routinely used to determine the concentration of DNA, RNA or protein. There is however a significant difference in determining the concentration of a given species (RNA, DNA, protein) in isolation (a contrived circumstance) as opposed to determining that concentration in the presence of other species (a more realistic situation). To present the student with a more realistic laboratory experience and also to fill a hole that we believe exists in student experience prior to reaching a biochemistry course, we have devised a three week laboratory experience designed so that students learn to: connect laboratory practice with theory, apply the Beer-Lambert-Bougert Law to biochemical analyses, demonstrate the utility and limitations of example quantitative colorimetric assays, demonstrate the utility and limitations of UV analyses for biomolecules, develop strategies for analysis of a solution of unknown biomolecular composition, use digital micropipettors to make accurate and precise measurements, and apply graphing software. Copyright © 2013 Wiley Periodicals, Inc.

  10. The Toarcian Bathonian succession of the Antsiranana Basin (NW Madagascar): Facies analysis and tectono-sedimentary history in the development of the East Africa-Madagascar conjugate margins

    Papini, Mauro; Benvenuti, Marco

    2008-04-01

    The latest Early to Middle Jurassic succession of the Antsiranana Basin (NW Madagascar) records the complex transition from the continental rifting of Gondwana to the drifting of Madagascar-India from East Africa. The Madagascan Late Paleozoic-Mesozoic successions have been included in several paleogeographic and geodynamic models explaining the evolution of the Gondwana margins. Nevertheless, in some cases, as for the Toarcian-Bathonian deposits of the Antsiranana Basin, no significant stratigraphic revision has been carried out since the early 1970s. New field surveys allow reconsidering the stratigraphic and structural context and the palaeoenvironmental meaning of Toarcian-Bathonian successions occurring in different parts of the basin. These successions rest on the Triassic-Early Jurassic Isalo Sandstone which records pre-breakup rift events with a dominantly fluvial deposition. This situation is similar to other continental rift basins of Gondwana. After a regional Toarcian transgression the different portions of the Antsiranana Basin were characterized by significantly diversified and coeval depositional environments. The basin can be subdivided in a SW and NE part separated by a NW-SE trending structural high. In the SW part of the basin (Ampasindava sub-basin) the so-called "Jurassique paralique" [Rerat, J.C., 1964. Note sur les variations de faciès des sèries jurassiques du nord de Madagascar. Comptes Rendus Semaine gèologique, Tananarive, pp. 15-22] or " Facies Mixtes de la Presqu'ile de Ampasindava" [Besairie, H., Collignon, M., 1972. Géologie de Madagascar; I. Les terrains sédimentaires. Annales Géologiques de Madagascar, 35, 1-463], a 1500 m thick prevalently terrigenous deposit, has been subdivided into four units. They document the long-lasting development of coastal-deltaic systems in a highly subsiding area. In the NE portion of the basin (Ankarana-Analamera sub-basin), a coeval mixed carbonate-terrigenous succession subdivided in five units

  11. Sulfur speciation and isotope analysis of the 2.7 Ga shallow- and deep-facies black shales from Pilbara, Western Australia

    Minami, H.; Yamaguchi, K. E.; Naraoka, H.

    2014-12-01

    It has been widely believed that Great Oxidation Event (GOE: Holland, 1994) occurred at ~2.4-2.2 Ga ago. However, some previous studies have found evidence for oxic ocean and atmosphere from earlier rock records (e.g., Hoashi et al., 2009). In order to explore if such oxic environment was local or global and if there was redox heterogeneity in a sedimentary basin before the inferred GOE, using the 2.7 Ga pyrite-bearing drillcore black shales (deep-facies WRL1 and shallow-facies RHDH2A drillcores) from Pilbara, Western Australia, we separately quantified abundance of S-bearing species (SAVS (acid-volatile sulfide), Spy (pyrite), SSO4 (sulfate), Sorg (organic-S), and S0 (elemental S) and Fe-bearing species (Fecarb, Feox, and Femag) by using sequential extraction methods. These samples were previously used by Brocks et al. (1999), Yamaguchi (2002), Yamaguchi et al. (2005), and Eigenbrode and Freeman (2006). The shallow samples have high S contents and are interpreted to have deposited in relatively anoxic environment, but most of deep samples with elevated Fe contents deposited in relatively oxic environment. The DOP values and δ34Spy values are relatively higher in shallow samples, suggesting active bacterial sulfate reduction in reducing environment created due to near-complete consumption of dissolved O2by decomposition of organic matter produced by photosynthesizers living in the surface ocean. All of these observations consistently suggest that the shallower part was anoxic and deeper part was oxic in the 2.7 Ga ocean. The surface ocean would have been oxygenated due to activity of oxygenic photosynthesis. Such redox stratification of the ocean, i.e., development of mid-depth (shallow) OMZ in an essentially oxic ocean, is typically seen in highly productive regions in the modern ocean. Modern-style oceanic redox structure could have existed as far back as 2.7 Ga ago, much earlier than the inferred GOE at ~2.4-2.2 Ga. Brocks et al. (1999) Science 285, 1033

  12. Detailed facies analyses within the Bluell and Sherwood Members, Mission Canyon Formation, North Dakota, USA - Facies stacking patterns, sequence stratigraphy and porosity relationship, consequences for reservoir distribution

    Sjöstedt, Tony

    2017-01-01

    Detailed core analysis from seven wells with cores cut within the overall carbonate succession that makes up the Bluell and Sherwood Members of the Mission Canyon Formation located in Renville County, North Dakota, resulted in the identification of eleven depositional facies. These facies that reflect a range in depositional conditions from inner to back ramp, that is shallow fair-weather to uppermost intertidal and supratidal conditions. Systematic core analysis using a highly detailed digit...

  13. Facies analysis of the Codó Formation (Late Aptian in the Grajaú Area, Southern São Luís-Grajaú Basin

    Rossetti Dilce F.

    2004-01-01

    Full Text Available Facies descriptions of the Codó Formation in the Grajaú area are provided for the first time, and its sedimentary characteristics compared to those from the Codó area to allow paleoenvironmental reconstructions. Deposits in the Grajaú area include evaporites, limestones and argillites bearing features indicative of a shallow, low energy, subaqueous, saline environment exposed to meteoric and/or capillary conditions. Flooding-evaporative concentration-desiccation cycles suggest a saline pan complex surrounded by extensive evaporitic mudflats. The location of the system, whether coastal or inland, is a matter open for debate. However, the later hypothesis is favored considering: 1. Sr isotopic data, with values higher than those expected for Late Aptian marine waters; 2. calcitic composition of limestones (instead of dolomitic and/or magnesitic as expected in coastal settings; and 3. presence of continental ostracods and lack of marine fauna. This interpretation is consistent with that proposed for UpperAptian deposits of the Codó area, but the depositional system there was one dominated by more stable, well-stratified, anoxic waters and evaporite precipitation in central lacustrine areas, while in the Grajaú area the salt pan was more oxygenated and ephemeral, with salt precipitation mainly in marginal areas or along surrounding mudflats.

  14. Tissue Microarray Analysis Applied to Bone Diagenesis.

    Mello, Rafael Barrios; Silva, Maria Regina Regis; Alves, Maria Teresa Seixas; Evison, Martin Paul; Guimarães, Marco Aurelio; Francisco, Rafaella Arrabaca; Astolphi, Rafael Dias; Iwamura, Edna Sadayo Miazato

    2017-01-04

    Taphonomic processes affecting bone post mortem are important in forensic, archaeological and palaeontological investigations. In this study, the application of tissue microarray (TMA) analysis to a sample of femoral bone specimens from 20 exhumed individuals of known period of burial and age at death is described. TMA allows multiplexing of subsamples, permitting standardized comparative analysis of adjacent sections in 3-D and of representative cross-sections of a large number of specimens. Standard hematoxylin and eosin, periodic acid-Schiff and silver methenamine, and picrosirius red staining, and CD31 and CD34 immunohistochemistry were applied to TMA sections. Osteocyte and osteocyte lacuna counts, percent bone matrix loss, and fungal spheroid element counts could be measured and collagen fibre bundles observed in all specimens. Decalcification with 7% nitric acid proceeded more rapidly than with 0.5 M EDTA and may offer better preservation of histological and cellular structure. No endothelial cells could be detected using CD31 and CD34 immunohistochemistry. Correlation between osteocytes per lacuna and age at death may reflect reported age-related responses to microdamage. Methodological limitations and caveats, and results of the TMA analysis of post mortem diagenesis in bone are discussed, and implications for DNA survival and recovery considered.

  15. Applied linear algebra and matrix analysis

    Shores, Thomas S

    2018-01-01

    In its second edition, this textbook offers a fresh approach to matrix and linear algebra. Its blend of theory, computational exercises, and analytical writing projects is designed to highlight the interplay between these aspects of an application. This approach places special emphasis on linear algebra as an experimental science that provides tools for solving concrete problems. The second edition’s revised text discusses applications of linear algebra like graph theory and network modeling methods used in Google’s PageRank algorithm. Other new materials include modeling examples of diffusive processes, linear programming, image processing, digital signal processing, and Fourier analysis. These topics are woven into the core material of Gaussian elimination and other matrix operations; eigenvalues, eigenvectors, and discrete dynamical systems; and the geometrical aspects of vector spaces. Intended for a one-semester undergraduate course without a strict calculus prerequisite, Applied Linear Algebra and M...

  16. Epithermal neutron activation analysis in applied microbiology

    Marina Frontasyeva

    2012-01-01

    Some results from applying epithermal neutron activation analysis at FLNP JINR, Dubna, Russia, in medical biotechnology, environmental biotechnology and industrial biotechnology are reviewed. In the biomedical experiments biomass from the blue-green alga Spirulina platensis (S. platensis) has been used as a matrix for the development of pharmaceutical substances containing such essential trace elements as selenium, chromium and iodine. The feasibility of target-oriented introduction of these elements into S. platensis biocomplexes retaining its protein composition and natural beneficial properties was shown. The absorption of mercury on growth dynamics of S. platensis and other bacterial strains was observed. Detoxification of Cr and Hg by Arthrobacter globiformis 151B was demonstrated. Microbial synthesis of technologically important silver nanoparticles by the novel actinomycete strain Streptomyces glaucus 71 MD and blue-green alga S. platensis were characterized by a combined use of transmission electron microscopy, scanning electron microscopy and energy-dispersive analysis of X-rays. It was established that the tested actinomycete S. glaucus 71 MD produces silver nanoparticles extracellularly when acted upon by the silver nitrate solution, which offers a great advantage over an intracellular process of synthesis from the point of view of applications. The synthesis of silver nanoparticles by S. platensis proceeded differently under the short-term and long-term silver action. (author)

  17. Analysis of the interaction between experimental and applied behavior analysis.

    Virues-Ortega, Javier; Hurtado-Parrado, Camilo; Cox, Alison D; Pear, Joseph J

    2014-01-01

    To study the influences between basic and applied research in behavior analysis, we analyzed the coauthorship interactions of authors who published in JABA and JEAB from 1980 to 2010. We paid particular attention to authors who published in both JABA and JEAB (dual authors) as potential agents of cross-field interactions. We present a comprehensive analysis of dual authors' coauthorship interactions using social networks methodology and key word analysis. The number of dual authors more than doubled (26 to 67) and their productivity tripled (7% to 26% of JABA and JEAB articles) between 1980 and 2010. Dual authors stood out in terms of number of collaborators, number of publications, and ability to interact with multiple groups within the field. The steady increase in JEAB and JABA interactions through coauthors and the increasing range of topics covered by dual authors provide a basis for optimism regarding the progressive integration of basic and applied behavior analysis. © Society for the Experimental Analysis of Behavior.

  18. Social network analysis applied to team sports analysis

    Clemente, Filipe Manuel; Mendes, Rui Sousa

    2016-01-01

    Explaining how graph theory and social network analysis can be applied to team sports analysis, This book presents useful approaches, models and methods that can be used to characterise the overall properties of team networks and identify the prominence of each team player. Exploring the different possible network metrics that can be utilised in sports analysis, their possible applications and variances from situation to situation, the respective chapters present an array of illustrative case studies. Identifying the general concepts of social network analysis and network centrality metrics, readers are shown how to generate a methodological protocol for data collection. As such, the book provides a valuable resource for students of the sport sciences, sports engineering, applied computation and the social sciences.

  19. Joint inversion of geophysical data using petrophysical clustering and facies deformation wth the level set technique

    Revil, A.

    2015-12-01

    Geological expertise and petrophysical relationships can be brought together to provide prior information while inverting multiple geophysical datasets. The merging of such information can result in more realistic solution in the distribution of the model parameters, reducing ipse facto the non-uniqueness of the inverse problem. We consider two level of heterogeneities: facies, described by facies boundaries and heteroegenities inside each facies determined by a correlogram. In this presentation, we pose the geophysical inverse problem in terms of Gaussian random fields with mean functions controlled by petrophysical relationships and covariance functions controlled by a prior geological cross-section, including the definition of spatial boundaries for the geological facies. The petrophysical relationship problem is formulated as a regression problem upon each facies. The inversion of the geophysical data is performed in a Bayesian framework. We demonstrate the usefulness of this strategy using a first synthetic case for which we perform a joint inversion of gravity and galvanometric resistivity data with the stations located at the ground surface. The joint inversion is used to recover the density and resistivity distributions of the subsurface. In a second step, we consider the possibility that the facies boundaries are deformable and their shapes are inverted as well. We use the level set approach to perform such deformation preserving prior topological properties of the facies throughout the inversion. With the help of prior facies petrophysical relationships and topological characteristic of each facies, we make posterior inference about multiple geophysical tomograms based on their corresponding geophysical data misfits. The method is applied to a second synthetic case showing that we can recover the heterogeneities inside the facies, the mean values for the petrophysical properties, and, to some extent, the facies boundaries using the 2D joint inversion of

  20. Modeling Oligo-Miocence channel sands (Dezful Embayment, SW Iran): an integrated facies classification workflow

    Heydari, Mostafa; Maddahi, Iradj; Moradpour, Mehran; Esmaeilpour, Sajjad

    2014-01-01

    This study has been conducted on Mansuri onshore oilfield located in Dezful Embayment, south-west Iran. One of the hydrocarbon-bearing formations is a Oligo-Miocene Asmari formation—the most prolific Iranian reservoir rock. Like many other oilfields in the area, the trap in this field is deemed structural (anticline), formed during the collision of the Arabian plate with the Iranian plate and the folding of Neotethys deposits with a NW–SE trend. This study integrates three different quantitative studies from geology, geophysics and petrophysics disciplines to quantitate ‘the qualitative study of seismic facies analysis based on trace shapes and 3D multi-attribute clustering’. First, stratigraphic sequences and seismic detectable facies were derived at one well location using the available high resolution core facies analysis and depositional environment assessment reports. Paleo and petrophysical logs from other wells were subsequently used for the extrapolation of stratigraphic sequences interpreted at the first well. Utilizing lithology discrimination obtained by wire-line log interpretation, facies were extrapolated to all wells in the area. Seismic 3D attribute analysis and seismic facies classification established a 3D facies volume accordingly, which was finally calibrated to geological facies at well locations. The ultimate extracted facies-guided geobody shows that good reservoir-quality channel sands have accumulated with NW/SE elongation at the ridge of the structure. As a result, this type of geometry has created a stratigraphic/structural hydrocarbon trap in this oilfield. Moreover, seismic facies analysis shows that buried channels do not parallel the predominant Arabian plate-originated channels (with SW–NE trends) in SW Zagros and are locally swerved in this area. (paper)

  1. Colilert® applied to food analysis

    Maria José Rodrigues

    2014-06-01

    Full Text Available Colilert® (IDEXX was originally developed for the simultaneous enumeration of coliforms and E. coli in water samples and has been used for the quality control routine of drinking, swimming pools, fresh, coastal and waste waters (Grossi et al., 2013. The Colilert® culture medium contains the indicator nutrient 4-Methylumbelliferyl-β-D-Glucuronide (MUG. MUG acts as a substrate for the E. coli enzyme β-glucuronidase, from which a fluorescent compound is produced. A positive MUG result produces fluorescence when viewed under an ultraviolet lamp. If the test fluorescence is equal to or greater than that of the control, the presence of E. coli has been confirmed (Lopez-Roldan et al., 2013. The present work aimed to apply Colilert® to the enumeration of E. coli in different foods, through the comparison of results against the reference method (ISO 16649-2, 2001 for E. coli food analysis. The study was divided in two stages. During the first stage ten different types of foods were analyzed with Colilert®, these included pastry, raw meat, ready to eat meals, yogurt, raw seabream and salmon, and cooked shrimp. From these it were approved the following: pastry with custard; raw minced pork; soup "caldo-verde"; raw vegetable salad (lettuce and carrots and solid yogurt. The approved foods presented a better insertion in the tray, the colour of the wells was lighter and the UV reading was easier. In the second stage the foods were artificially contaminated with 2 log/g of E. coli (ATCC 25922 and analyzed. Colilert® proved to be an accurate method and the counts were similar to the ones obtained with the reference method. In the present study, the Colilert® method did not reveal neither false-positive or false-negative results, however sometimes the results were difficult to read due to the presence of green fluorescence in some wells. Generally Colilert® was an easy and rapid method, but less objective and more expensive than the reference method.

  2. Additional aspects of facies determination of the Souza Formation

    Vasconcelos, E.C.; Mabesoone, J.M.

    1984-01-01

    By means of geochemical analysis of total sample and trace elements, x-ray and DTA investigation of the clay fractions, and microfanes study, obtained by the facies determination of the Souza Formation, some additional aspects giving evidence of the sequence of events responsable by origin, deposition and formation of sediments of this middle unit of the Rio do Peixe group were established. (Author) [pt

  3. Moving Forward: Positive Behavior Support and Applied Behavior Analysis

    Tincani, Matt

    2007-01-01

    A controversy has emerged about the relationship between positive behavior support and applied behavior analysis. Some behavior analysts suggest that positive behavior support and applied behavior analysis are the same (e.g., Carr & Sidener, 2002). Others argue that positive behavior support is harmful to applied behavior analysis (e.g., Johnston,…

  4. Introduction: Conversation Analysis in Applied Linguistics

    Sert, Olcay; Seedhouse, Paul

    2011-01-01

    This short, introductory paper presents an up-to-date account of works within the field of Applied Linguistics which have been influenced by a Conversation Analytic paradigm. The article reviews recent studies in classroom interaction, materials development, proficiency assessment and language teacher education. We believe that the publication of…

  5. Applied time series analysis and innovative computing

    Ao, Sio-Iong

    2010-01-01

    This text is a systematic, state-of-the-art introduction to the use of innovative computing paradigms as an investigative tool for applications in time series analysis. It includes frontier case studies based on recent research.

  6. Barrier island facies models and recognition criteria

    Mulhern, J.; Johnson, C. L.

    2017-12-01

    Barrier island outcrops record transgressive shoreline motion at geologic timescales, providing integral clues to understanding how coastlines respond to rising sea levels. However, barrier island deposits are difficult to recognize. While significant progress has been made in understanding the modern coastal morphodynamics, this insight is not fully leveraged in existing barrier island facies models. Excellent outcrop exposures of the paralic Upper Cretaceous Straight Cliffs Formation of southern Utah provide an opportunity to revise facies models and recognition criteria for barrier island deposits. Preserved barrier islands are composed of three main architectural elements (shorefaces, tidal inlets, and tidal channels) which occur independently or in combination to create larger-scale barrier island deposits. Barrier island shorefaces record progradation, while barrier island tidal inlets record lateral migration, and barrier island tidal channels record aggradation within the tidal inlet. Four facies associations are used to describe and characterize these barrier island architectural elements. Barrier islands occur in association with backarrier fill and internally contain lower and upper shoreface, high-energy upper shoreface, and tidal channel facies. Barrier islands bound lagoons or estuaries, and are distinguished from other shoreface deposits by their internal facies and geometry, association with backbarrier facies, and position within transgressive successions. Tidal processes, in particular tidal inlet migration and reworking of the upper shoreface, also distinguish barrier island deposits. Existing barrier island models highlight the short term heterogeneous and dynamic nature of barrier island systems, yet overlook processes tied to geologic time scales, such as multi-directional motion, erosion, and reworking, and their expressions in preserved barrier island strata. This study uses characteristic outcrop expressions of barrier island successions to

  7. Tissue Microarray Analysis Applied to Bone Diagenesis

    Barrios Mello, Rafael; Regis Silva, Maria Regina; Seixas Alves, Maria Teresa; Evison, Martin; Guimarães, Marco Aurélio; Francisco, Rafaella Arrabaça; Dias Astolphi, Rafael; Miazato Iwamura, Edna Sadayo

    2017-01-01

    Taphonomic processes affecting bone post mortem are important in forensic, archaeological and palaeontological investigations. In this study, the application of tissue microarray (TMA) analysis to a sample of femoral bone specimens from 20 exhumed individuals of known period of burial and age at death is described. TMA allows multiplexing of subsamples, permitting standardized comparative analysis of adjacent sections in 3-D and of representative cross-sections of a large number of specimens....

  8. Meta-analysis in applied ecology.

    Stewart, Gavin

    2010-02-23

    This overview examines research synthesis in applied ecology and conservation. Vote counting and pooling unweighted averages are widespread despite the superiority of syntheses based on weighted combination of effects. Such analyses allow exploration of methodological uncertainty in addition to consistency of effects across species, space and time, but exploring heterogeneity remains controversial. Meta-analyses are required to generalize in ecology, and to inform evidence-based decision-making, but the more sophisticated statistical techniques and registers of research used in other disciplines must be employed in ecology to fully realize their benefits.

  9. Applied surface analysis of metal materials

    Weiss, Z.

    1987-01-01

    The applications of surface analytical techniques in the solution of technological problems in metalurgy and engineering are reviewed. Some important application areas such as corrosion, grain boundary segregation and metallurgical coatings are presented together with specific requirements for the type of information which is necessary for solving particular problems. The techniques discussed include: electron spectroscopies (Auger Electron Spectroscopy, Electron Spectroscopy for Chemical Analysis), ion spectroscopies (Secondary Ion Mass Spectrometry, Ion Scattering Spectroscopy), Rutherford Back-Scattering, nuclear reaction analysis, optical methods (Glow Discharge Optical Emission Spectrometry), ellipsometry, infrared and Raman spectroscopy, the Moessbauer spectroscopy and methods of consumptive depth profile analysis. Principles and analytical features of these methods are demonstrated and examples of their applications to metallurgy are taken from recent literature. (author). 4 figs., 2 tabs., 112 refs

  10. Applied modal analysis of wind turbine blades

    Pedersen, H.B.; Kristensen, O.J.D.

    2003-01-01

    In this project modal analysis has been used to determine the natural frequencies, damping and the mode shapes for wind turbine blades. Different methods to measure the position and adjust the direction of the measuring points are discussed. Differentequipment for mounting the accelerometers...... is investigated by repeated measurement on the same wind turbine blade. Furthermore the flexibility of the test set-up is investigated, by use ofaccelerometers mounted on the flexible adapter plate during the measurement campaign. One experimental campaign investigated the results obtained from a loaded...... and unloaded wind turbine blade. During this campaign the modal analysis are performed on ablade mounted in a horizontal and a vertical position respectively. Finally the results obtained from modal analysis carried out on a wind turbine blade are compared with results obtained from the Stig Øyes blade_EV1...

  11. Applied quantitative analysis in the social sciences

    Petscher, Yaacov; Compton, Donald L

    2013-01-01

    To say that complex data analyses are ubiquitous in the education and social sciences might be an understatement. Funding agencies and peer-review journals alike require that researchers use the most appropriate models and methods for explaining phenomena. Univariate and multivariate data structures often require the application of more rigorous methods than basic correlational or analysis of variance models. Additionally, though a vast set of resources may exist on how to run analysis, difficulties may be encountered when explicit direction is not provided as to how one should run a model

  12. Multiparameter Elastic Full Waveform Inversion With Facies Constraints

    Zhang, Zhendong

    2017-08-17

    Full waveform inversion (FWI) aims fully benefit from all the data characteristics to estimate the parameters describing the assumed physics of the subsurface. However, current efforts to utilize full waveform inversion as a tool beyond acoustic imaging applications, for example in reservoir analysis, faces inherent challenges related to the limited resolution and the potential trade-off between the elastic model parameters. Adding rock physics constraints does help to mitigate these issues, but current approaches to add such constraints are based on including them as a priori knowledge mostly valid around the well or as a boundary condition for the whole area. Since certain rock formations inside the Earth admit consistent elastic properties and relative values of elastic and anisotropic parameters (facies), utilizing such localized facies information in FWI can improve the resolution of inverted parameters. We propose a novel confidence map based approach to utilize the facies-based constraints in both isotropic and anisotropic elastic FWI. We invert for such a confidence map using Bayesian theory, in which the confidence map is updated at each iteration of the inversion using both the inverted models and a prior information. The numerical examples show that the proposed method can reduce the trade-offs and also can improve the resolution of the inverted elastic and anisotropic properties.

  13. Applied Spectrophotometry: Analysis of a Biochemical Mixture

    Trumbo, Toni A.; Schultz, Emeric; Borland, Michael G.; Pugh, Michael Eugene

    2013-01-01

    Spectrophotometric analysis is essential for determining biomolecule concentration of a solution and is employed ubiquitously in biochemistry and molecular biology. The application of the Beer-Lambert-Bouguer Lawis routinely used to determine the concentration of DNA, RNA or protein. There is however a significant difference in determining the…

  14. Sedimentary Facies of the West Crocker Formation North Kota Kinabalu-Tuaran Area, Sabah, Malaysia

    Mohamed, Azfar; Hadi Abd Rahman, Abdul; Suhaili Ismail, Mohd

    2016-02-01

    Newly outcrops exposed in the West Crocker Formation have led to the detail sedimentolgical analysis of the formation. Eight sedimentary facies have been recognised in which it was divided into three main groups: (1) sand-dominated facies (F1-F2), (2) poorly- sorted unit mixed sand and mud-dominated facies (F3), and (3) mud-dominated facies (F4-F5). These are: F1- graded sandstone (massive to planar laminated), F2-ripple-cross laminated, wavy and convolute lamination sandstone, F3-chaotic beds of mixed sandstone and mudstone blocks and clasts, F4-lenticular bedded of sandstone, and F5-shale. The studies of the formation has come out that it was deposited in a sand-rich submarine fan with specific location located at (1) inner fan channel-levee complex; (2) mid-fan channelised lobes, and (3) outer fan.

  15. Thermal analysis applied to irradiated propolis

    Matsuda, Andrea Harumi; Machado, Luci Brocardo; Mastro, N.L. del E-mail: nelida@usp.br

    2002-03-01

    Propolis is a resinous hive product, collected by bees. Raw propolis requires a decontamination procedure and irradiation appears as a promising technique for this purpose. The valuable properties of propolis for food and pharmaceutical industries have led to increasing interest in its technological behavior. Thermal analysis is a chemical analysis that gives information about changes on heating of great importance for technological applications. Ground propolis samples were {sup 60}Co gamma irradiated with 0 and 10 kGy. Thermogravimetry curves shown a similar multi-stage decomposition pattern for both irradiated and unirradiated samples up to 600 deg. C. Similarly, through differential scanning calorimetry , a coincidence of melting point of irradiated and unirradiated samples was found. The results suggest that the irradiation process do not interfere on the thermal properties of propolis when irradiated up to 10 kGy.

  16. Applied modal analysis of wind turbine blades

    Broen Pedersen, H.; Dahl Kristensen, O.J.

    2003-02-01

    In this project modal analysis has been used to determine the natural frequencies, damping and the mode shapes for wind turbine blades. Different methods to measure the position and adjust the direction of the measuring points are discussed. Different equipment for mounting the accelerometers are investigated and the most suitable are chosen. Different excitation techniques are tried during experimental campaigns. After a discussion the pendulum hammer were chosen, and a new improved hammer was manufactured. Some measurement errors are investigated. The ability to repeat the measured results is investigated by repeated measurement on the same wind turbine blade. Furthermore the flexibility of the test set-up is investigated, by use of accelerometers mounted on the flexible adapter plate during the measurement campaign. One experimental campaign investigated the results obtained from a loaded and unloaded wind turbine blade. During this campaign the modal analysis are performed on a blade mounted in a horizontal and a vertical position respectively. Finally the results obtained from modal analysis carried out on a wind turbine blade are compared with results obtained from the Stig Oeyes blade{sub E}V1 program. (au)

  17. Reliability analysis applied to structural tests

    Diamond, P.; Payne, A. O.

    1972-01-01

    The application of reliability theory to predict, from structural fatigue test data, the risk of failure of a structure under service conditions because its load-carrying capability is progressively reduced by the extension of a fatigue crack, is considered. The procedure is applicable to both safe-life and fail-safe structures and, for a prescribed safety level, it will enable an inspection procedure to be planned or, if inspection is not feasible, it will evaluate the life to replacement. The theory has been further developed to cope with the case of structures with initial cracks, such as can occur in modern high-strength materials which are susceptible to the formation of small flaws during the production process. The method has been applied to a structure of high-strength steel and the results are compared with those obtained by the current life estimation procedures. This has shown that the conventional methods can be unconservative in certain cases, depending on the characteristics of the structure and the design operating conditions. The suitability of the probabilistic approach to the interpretation of the results from full-scale fatigue testing of aircraft structures is discussed and the assumptions involved are examined.

  18. Artificial intelligence applied to process signal analysis

    Corsberg, Dan

    1988-01-01

    Many space station processes are highly complex systems subject to sudden, major transients. In any complex process control system, a critical aspect of the human/machine interface is the analysis and display of process information. Human operators can be overwhelmed by large clusters of alarms that inhibit their ability to diagnose and respond to a disturbance. Using artificial intelligence techniques and a knowledge base approach to this problem, the power of the computer can be used to filter and analyze plant sensor data. This will provide operators with a better description of the process state. Once a process state is recognized, automatic action could be initiated and proper system response monitored.

  19. Thermal transient analysis applied to horizontal wells

    Duong, A.N. [Society of Petroleum Engineers, Canadian Section, Calgary, AB (Canada)]|[ConocoPhillips Canada Resources Corp., Calgary, AB (Canada)

    2008-10-15

    Steam assisted gravity drainage (SAGD) is a thermal recovery process used to recover bitumen and heavy oil. This paper presented a newly developed model to estimate cooling time and formation thermal diffusivity by using a thermal transient analysis along the horizontal wellbore under a steam heating process. This radial conduction heating model provides information on the heat influx distribution along a horizontal wellbore or elongated steam chamber, and is therefore important for determining the effectiveness of the heating process in the start-up phase in SAGD. Net heat flux estimation in the target formation during start-up can be difficult to measure because of uncertainties regarding heat loss in the vertical section; steam quality along the horizontal segment; distribution of steam along the wellbore; operational conditions; and additional effects of convection heating. The newly presented model can be considered analogous to pressure transient analysis of a buildup after a constant pressure drawdown. The model is based on an assumption of an infinite-acting system. This paper also proposed a new concept of a heating ring to measure the heat storage in the heated bitumen at the time of testing. Field observations were used to demonstrate how the model can be used to save heat energy, conserve steam and enhance bitumen recovery. 18 refs., 14 figs., 2 appendices.

  20. A Facies Model for Temperate Continental Glaciers.

    Ashley, Gail Mowry

    1987-01-01

    Discusses the presence and dynamics of continental glaciers in the domination of the physical processes of erosion and deposition in the mid-latitudes during the Pleistocene period. Describes the use of a sedimentary facies model as a guide to recognizing ancient temperate continental glacial deposits. (TW)

  1. Photometric analysis applied in determining facial type

    Luciana Flaquer Martins

    2012-10-01

    Full Text Available INTRODUCTION: In orthodontics, determining the facial type is a key element in the prescription of a correct diagnosis. In the early days of our specialty, observation and measurement of craniofacial structures were done directly on the face, in photographs or plaster casts. With the development of radiographic methods, cephalometric analysis replaced the direct facial analysis. Seeking to validate the analysis of facial soft tissues, this work compares two different methods used to determining the facial types, the anthropometric and the cephalometric methods. METHODS: The sample consisted of sixty-four Brazilian individuals, adults, Caucasian, of both genders, who agreed to participate in this research. All individuals had lateral cephalograms and facial frontal photographs. The facial types were determined by the Vert Index (cephalometric and the Facial Index (photographs. RESULTS: The agreement analysis (Kappa, made for both types of analysis, found an agreement of 76.5%. CONCLUSIONS: We concluded that the Facial Index can be used as an adjunct to orthodontic diagnosis, or as an alternative method for pre-selection of a sample, avoiding that research subjects have to undergo unnecessary tests.INTRODUÇÃO: em Ortodontia, a determinação do tipo facial é um elemento-chave na prescrição de um diagnóstico correto. Nos primórdios de nossa especialidade, a observação e a medição das estruturas craniofaciais eram feitas diretamente na face, em fotografias ou em modelos de gesso. Com o desenvolvimento dos métodos radiográficos, a análise cefalométrica foi substituindo a análise facial direta. Visando legitimar o estudo dos tecidos moles faciais, esse trabalho comparou a determinação do tipo facial pelos métodos antropométrico e cefalométrico. MÉTODOS: a amostra constou de sessenta e quatro indivíduos brasileiros, adultos, leucodermas, de ambos os sexos, que aceitaram participar da pesquisa. De todos os indivíduos da amostra

  2. Gradient pattern analysis applied to galaxy morphology

    Rosa, R. R.; de Carvalho, R. R.; Sautter, R. A.; Barchi, P. H.; Stalder, D. H.; Moura, T. C.; Rembold, S. B.; Morell, D. R. F.; Ferreira, N. C.

    2018-06-01

    Gradient pattern analysis (GPA) is a well-established technique for measuring gradient bilateral asymmetries of a square numerical lattice. This paper introduces an improved version of GPA designed for galaxy morphometry. We show the performance of the new method on a selected sample of 54 896 objects from the SDSS-DR7 in common with Galaxy Zoo 1 catalogue. The results suggest that the second gradient moment, G2, has the potential to dramatically improve over more conventional morphometric parameters. It separates early- from late-type galaxies better (˜ 90 per cent) than the CAS system (C˜ 79 per cent, A˜ 50 per cent, S˜ 43 per cent) and a benchmark test shows that it is applicable to hundreds of thousands of galaxies using typical processing systems.

  3. Energy analysis applied to uranium resource estimation

    Mortimer, N.D.

    1980-01-01

    It is pointed out that fuel prices and ore costs are interdependent, and that in estimating ore costs (involving the cost of fuels used to mine and process the uranium) it is necessary to take into account the total use of energy by the entire fuel system, through the technique of energy analysis. The subject is discussed, and illustrated with diagrams, under the following heads: estimate of how total workable resources would depend on production costs; sensitivity of nuclear electricity prices to ore costs; variation of net energy requirement with ore grade for a typical PWR reactor design; variation of average fundamental cost of nuclear electricity with ore grade; variation of cumulative uranium resources with current maximum ore costs. (U.K.)

  4. Toward applied behavior analysis of life aloft

    Brady, J. V.

    1990-01-01

    This article deals with systems at multiple levels, at least from cell to organization. It also deals with learning, decision making, and other behavior at multiple levels. Technological development of a human behavioral ecosystem appropriate to space environments requires an analytic and synthetic orientation, explicitly experimental in nature, dictated by scientific and pragmatic considerations, and closely approximating procedures of established effectiveness in other areas of natural science. The conceptual basis of such an approach has its roots in environmentalism which has two main features: (1) knowledge comes from experience rather than from innate ideas, divine revelation, or other obscure sources; and (2) action is governed by consequences rather than by instinct, reason, will, beliefs, attitudes or even the currently fashionable cognitions. Without an experimentally derived data base founded upon such a functional analysis of human behavior, the overgenerality of "ecological systems" approaches render them incapable of ensuring the successful establishment of enduring space habitats. Without an experimentally derived function account of individual behavioral variability, a natural science of behavior cannot exist. And without a natural science of behavior, the social sciences will necessarily remain in their current status as disciplines of less than optimal precision or utility. Such a functional analysis of human performance should provide an operational account of behavior change in a manner similar to the way in which Darwin's approach to natural selection accounted for the evolution of phylogenetic lines (i.e., in descriptive, nonteleological terms). Similarly, as Darwin's account has subsequently been shown to be consonant with information obtained at the cellular level, so too should behavior principles ultimately prove to be in accord with an account of ontogenetic adaptation at a biochemical level. It would thus seem obvious that the most

  5. Probabilistic safety analysis applied to RBMK reactors

    Gerez Martin, L.; Fernandez Ramos, P.

    1995-01-01

    The project financed by the European Union ''Revision of RBMK Reactor Safety was divided into nine Topic Groups dealing with different aspects of safety. The area covered by Topic Group 9 was Probabilistic Safety Analysis. TG9 will have touched on some of the problems discussed by other groups, although in terms of the systematic quantification of the impact of design characteristics and RBMK reactor operating practices on the risk of core damage. On account of the reduced time scale and the resources available for the project, the analysis was made using a simplified method based on the results of PSAs conducted in Western countries and on the judgement of the group members. The simplifies method is based on the concepts of Qualification, Redundancy and Automatic Actuation of the systems considered. PSA experience shows that systems complying with the above-mentioned concepts have a failure probability of 1.0E-3 when redundancy is simple, ie two similar equipment items capable of carrying out the same function. In general terms, this value can be considered to be dominated by potential common cause failures. The value considered above changes according to factors that have a positive effect upon it, such as an additional redundancy with a different equipment item (eg a turbo pumps and a motor pump), individual trains with good separations, etc, or a negative effect, such as the absence of suitable periodical tests, the need for operators to perform manual operations, etc. Similarly, possible actions required by the operator during accident sequences are assigned failure probability values between 1 and 1.0E-4, according to the complexity of the action (including local actions to be performed outside the control room) and the time available

  6. Digital photoelastic analysis applied to implant dentistry

    Ramesh, K.; Hariprasad, M. P.; Bhuvanewari, S.

    2016-12-01

    Development of improved designs of implant systems in dentistry have necessitated the study of stress fields in the implant regions of the mandible/maxilla for better understanding of the biomechanics involved. Photoelasticity has been used for various studies related to dental implants in view of whole field visualization of maximum shear stress in the form of isochromatic contours. The potential of digital photoelasticity has not been fully exploited in the field of implant dentistry. In this paper, the fringe field in the vicinity of the connected implants (All-On-Four® concept) is analyzed using recent advances in digital photoelasticity. Initially, a novel 3-D photoelastic model making procedure, to closely mimic all the anatomical features of the human mandible is proposed. By choosing appropriate orientation of the model with respect to the light path, the essential region of interest were sought to be analysed while keeping the model under live loading conditions. Need for a sophisticated software module to carefully identify the model domain has been brought out. For data extraction, five-step method is used and isochromatics are evaluated by twelve fringe photoelasticity. In addition to the isochromatic fringe field, whole field isoclinic data is also obtained for the first time in implant dentistry, which could throw important information in improving the structural stability of the implant systems. Analysis is carried out for the implant in the molar as well as the incisor region. In addition, the interaction effects of loaded molar implant on the incisor area are also studied.

  7. Sedimentary facies and Holocene depositional processes of Laura Island, Majuro Atoll

    Yasukochi, Toru; Kayanne, Hajime; Yamaguchi, Toru; Yamano, Hiroya

    2014-10-01

    The depositional processes that formed Laura Island, Majuro Atoll, Marshall Islands, were reconstructed based on a facies analysis of island sediments and spine ratios, and radiocarbon ages of foraminifera. Sedimentary facies were analyzed from trenches and drill cores excavated on the island and its adjacent reef flat. Depositional ages were obtained using benthic foraminifera (Calcarina) whose spines had not been abraded. The facies were classified into two types: gravelly and sandy. The initial sediments of these sites consisted of gravelly facies in the lower horizon and sandy facies in the upper horizon. Their ages were approximately 2000 cal BP and coincident with the onset of a 1.1-m decline in regional relative sea level, which enabled deposition of the gravelly facies. Half of the sand fraction of the sediment was composed of larger benthic foraminifera. The spine ratio showed that their supply source on the reef flat was located oceanside of the island. The supply source appears to have been caused by the relative sea-level fall. This indicates that the studied island was formed by a relative reduction in wave energy and enhanced foraminiferal supply, both of which were triggered by the late Holocene relative sea-level fall.

  8. Applied research of environmental monitoring using instrumental neutron activation analysis

    Chung, Young Sam; Moon, Jong Hwa; Chung, Young Ju

    1997-08-01

    This technical report is written as a guide book for applied research of environmental monitoring using Instrumental Neutron Activation Analysis. The contents are as followings; sampling and sample preparation as a airborne particulate matter, analytical methodologies, data evaluation and interpretation, basic statistical methods of data analysis applied in environmental pollution studies. (author). 23 refs., 7 tabs., 9 figs.

  9. Applying homotopy analysis method for solving differential-difference equation

    Wang Zhen; Zou Li; Zhang Hongqing

    2007-01-01

    In this Letter, we apply the homotopy analysis method to solving the differential-difference equations. A simple but typical example is applied to illustrate the validity and the great potential of the generalized homotopy analysis method in solving differential-difference equation. Comparisons are made between the results of the proposed method and exact solutions. The results show that the homotopy analysis method is an attractive method in solving the differential-difference equations

  10. Sensitivity analysis approaches applied to systems biology models.

    Zi, Z

    2011-11-01

    With the rising application of systems biology, sensitivity analysis methods have been widely applied to study the biological systems, including metabolic networks, signalling pathways and genetic circuits. Sensitivity analysis can provide valuable insights about how robust the biological responses are with respect to the changes of biological parameters and which model inputs are the key factors that affect the model outputs. In addition, sensitivity analysis is valuable for guiding experimental analysis, model reduction and parameter estimation. Local and global sensitivity analysis approaches are the two types of sensitivity analysis that are commonly applied in systems biology. Local sensitivity analysis is a classic method that studies the impact of small perturbations on the model outputs. On the other hand, global sensitivity analysis approaches have been applied to understand how the model outputs are affected by large variations of the model input parameters. In this review, the author introduces the basic concepts of sensitivity analysis approaches applied to systems biology models. Moreover, the author discusses the advantages and disadvantages of different sensitivity analysis methods, how to choose a proper sensitivity analysis approach, the available sensitivity analysis tools for systems biology models and the caveats in the interpretation of sensitivity analysis results.

  11. Animal Research in the "Journal of Applied Behavior Analysis"

    Edwards, Timothy L.; Poling, Alan

    2011-01-01

    This review summarizes the 6 studies with nonhuman animal subjects that have appeared in the "Journal of Applied Behavior Analysis" and offers suggestions for future research in this area. Two of the reviewed articles described translational research in which pigeons were used to illustrate and examine behavioral phenomena of applied significance…

  12. Dimensional Analysis with space discrimination applied to Fickian difussion phenomena

    Diaz Sanchidrian, C.; Castans, M.

    1989-01-01

    Dimensional Analysis with space discrimination is applied to Fickian difussion phenomena in order to transform its partial differen-tial equations into ordinary ones, and also to obtain in a dimensionl-ess fom the Ficks second law. (Author)

  13. Mineralogical and Micro-fabric investigation of the Sandy Facies of Opalinus Clay (Mont Terri)

    Kaufhold, Annette; Siegesmund, Siegfried; Dohrmann, Reiner; Graesle, Werner; Plischke, Ingo

    2013-01-01

    In the field of geological disposal of radioactive waste in many countries argillaceous formations are considered as potential host rock. For the understanding of the long-term behaviour of clay host rock, it is important to understand the interaction between mechanical behaviour, micro-fabric, and mineral composition. Previous publications showed that particularly the carbonate content and the arrangement of the carbonate grains (as cement in the matrix or as shells) determines the mechanical strength of Opalinus Clay and Callovo-Oxfordian Clay specimens, respectively. Klinkenberg et al. (2009) studied the shaly facies of Opalinus Clay, however, the actual deposit is planned to be built in the sandy facies of Opalinus Clay. The aim of the present study is to investigate the relation between micro-fabric, mineral composition, and mechanical properties of different samples derived from the sandy facies (BLT-A2). Image analysis showed that the carbonates in the sandy facies mainly occur as 1) matrix which in turn acts as cement. Carbonates also occur 2) in the fine sand fraction and 3) biogenic carbonates as traces. The carbonates of the sandy facies, therefore, appear to be similar to the carbonates of the Callovo-Oxfordian Clay with respect to their possible influence on failure strength. The mechanical testing showed that the shear strength increases with increasing carbonate content. This phenomenon was also observed for the samples of the Callovo-Oxfordian Clay, while the opposite relation was found for the shaly facies of the Opalinus Clay. Preliminary results presented here, indicate that the sandy facies (drilling BLT-A2) and Callovo-Oxfordian Clay show similar mechanical properties - in detail: 1) Micro-fabric: carbonates predominate in the matrix, 2) Mineralogy: high carbonate content and 3) Mechanical testing: shear strength increases with increasing carbonate content, where the type of carbonates which controls the increase of strength has to be

  14. Prima facie questions in quantum gravity

    Isham, C. J.

    The long history of the study of quantum gravity has thrown up a complex web of ideas and approaches. The aim of this article is to unravel this web a little by analysing some of the {\\em prima facie\\/} questions that can be asked of almost any approach to quantum gravity and whose answers assist in classifying the different schemes. Particular emphasis is placed on (i) the role of background conceptual and technical structure; (ii) the role of spacetime diffeomorphisms; and (iii) the problem of time.

  15. The Significance of Regional Analysis in Applied Geography.

    Sommers, Lawrence M.

    Regional analysis is central to applied geographic research, contributing to better planning and policy development for a variety of societal problems facing the United States. The development of energy policy serves as an illustration of the capabilities of this type of analysis. The United States has had little success in formulating a national…

  16. SEQUENCE STRATIGRAPHIC ANALYSIS AND FACIES ARCHITECTURE OF THE CRETACEOUS MANCOS SHALE ON AND NEAR THE JICARILLA APACHE INDIAN RESERVATION, NEW MEXICO-THEIR RELATION TO SITES OF OIL ACCUMULATION

    Jennie Ridgley

    2000-01-01

    Oil distribution in the lower part of the Mancos Shale seems to be mainly controlled by fractures and by sandier facies that are dolomite-cemented. Structure in the area of the Jicarilla Apache Indian Reservation consists of the broad northwest- to southeast-trending Chaco slope, the deep central basin, and the monocline that forms the eastern boundary of the San Juan Basin. Superimposed on the regional structure are broad low-amplitude folds. Fractures seem best developed in the areas of these folds. Using sequence stratigraphic principals, the lower part of the Mancos Shale has been subdivided into four main regressive and transgressive components. These include facies that are the basinal time equivalents to the Gallup Sandstone, an overlying interbedded sandstone and shale sequence time equivalent to the transgressive Mulatto Tongue of the Mancos Shale, the El Vado Sandstone Member which is time equivalent to part of the Dalton Sandstone, and an unnamed interbedded sandstone and shale succession time equivalent to the regressive Dalton Sandstone and transgressive Hosta Tongue of the Mesaverde Group. Facies time equivalent to the Gallup Sandstone underlie an unconformity of regional extent. These facies are gradually truncated from south to north across the Reservation. The best potential for additional oil resources in these facies is in the southern part of the Reservation where the top sandier part of these facies is preserved. The overlying unnamed wedge of transgressive rocks produces some oil but is underexplored, except for sandstones equivalent to the Tocito Sandstone. This wedge of rocks is divided into from two to five units. The highest sand content in this wedge occurs where each of the four subdivisions above the Tocito terminates to the south and is overstepped by the next youngest unit. These terminal areas should offer the best targets for future oil exploration. The El Vado Sandstone Member overlies the transgressive wedge. It produces most of

  17. Sedimentary facies analysis of a high-frequency, small-scale, peritidal carbonate sequence in the Lower Jurassic of the Tripolis carbonate unit (central western Crete, Greece: Long-lasting emergence and fossil laminar dolocretes horizons

    Fotini A. Pomoni

    2016-07-01

    Full Text Available The study examines a Lower Jurassic (late Liassic cyclic lagoonal–peritidal stratigraphic unit outcropping in central western Crete (Tripolis unit, which corresponds to the eastern (internal part of the mainland Gavrovo-Tripolis platform, the most significant external platform of the Hellenides. The studied Tripolis carbonate sequence consists of meter-scale, shallowing-upward successions of restricted inner-carbonate platform facies, including cyclically repeated subtidal, intertidal and supratidal facies, that are separated by erosion surfaces (elementary cycles. Each cycle starts with relatively open-marine facies, which are overlain by shallower, more restricted facies (tidal flat progradation. The lithofacies association includes dolomitic intraclastic–peloidal–bioclastic wackestones–packstones/floatstones and grainstones/rudstones dominated by a restricted shallow-marine fauna (bivalves, gastropods, ostracods and seldom benthic foraminifers, representing a shallow subtidal to intertidal, moderately high-energy environment within an inner-platform setting (peritidal environment to restricted lagoon. This lithofacies association has been intermittently subaerially exposed and has undergone diagenetic processes in an inter- or supratidal environment, exhibiting features of vadose diagenesis and pedogenesis due to long-lasting exposure along certain horizons. The peritidal facies are capped by dolocretes controlled by root-activities (laminar dolocretes, peloidal–pisoid dolocretes and massive dolocretes, marking the end of each depositional cycle, and, thus, distinguishing the successive episodes of a prolonged subaerial exposure period and birth of paleosol horizons. Dolocretes consist a diagenetic facies, characterized by several vadose and pedogenic fabrics, including fenestral cavities with geopetal structures, “flower spar” to blocky sparry cement in primary pores, micritic coatings, crudely pelleted walls, alveolar

  18. Applied data analysis and modeling for energy engineers and scientists

    Reddy, T Agami

    2011-01-01

    ""Applied Data Analysis and Modeling for Energy Engineers and Scientists"" discusses mathematical models, data analysis, and decision analysis in modeling. The approach taken in this volume focuses on the modeling and analysis of thermal systems in an engineering environment, while also covering a number of other critical areas. Other material covered includes the tools that researchers and engineering professionals will need in order to explore different analysis methods, use critical assessment skills and reach sound engineering conclusions. The book also covers process and system design and

  19. Fourier convergence analysis applied to neutron diffusion Eigenvalue problem

    Lee, Hyun Chul; Noh, Jae Man; Joo, Hyung Kook

    2004-01-01

    Fourier error analysis has been a standard technique for the stability and convergence analysis of linear and nonlinear iterative methods. Though the methods can be applied to Eigenvalue problems too, all the Fourier convergence analyses have been performed only for fixed source problems and a Fourier convergence analysis for Eigenvalue problem has never been reported. Lee et al proposed new 2-D/1-D coupling methods and they showed that the new ones are unconditionally stable while one of the two existing ones is unstable at a small mesh size and that the new ones are better than the existing ones in terms of the convergence rate. In this paper the convergence of method A in reference 4 for the diffusion Eigenvalue problem was analyzed by the Fourier analysis. The Fourier convergence analysis presented in this paper is the first one applied to a neutronics eigenvalue problem to the best of our knowledge

  20. The identification of provenance-controlled facies by geochemical methods on a portion of the Vaal Reef, Klerksdorp Goldfield

    Henckel, J.; Schweitzer, J.K.; Horsch, H.

    1990-01-01

    The use of geochemical methods for identifying provenance controlled facies in Witwatersrand reefs is considered. Three methods - whole rock geochemistry, zircon analysis, and chromite analysis - have been evaluated in order to establish the feasibility of using these geochemical techniques. An area of Vaal Reef where two sedimentological facies with distinct gold distributions had previously been identified was investigated. The studies reported here gave evidence of differences in the source areas for these two facies. Accordingly, it is concluded that the application of geochemistry to identify provenance-controlled facies is a useful technique which can help geologists arrive at a better interpretation of depositional systems within Witwatersrand reefs and thereby assist in the understanding of gold distribution patterns. 26 refs., 11 figs., 4 tabs

  1. Resolving Carbonate Platform Geometries on the Island of Bonaire, Caribbean Netherlands through Semi-Automatic GPR Facies Classification

    Bowling, R. D.; Laya, J. C.; Everett, M. E.

    2018-05-01

    The study of exposed carbonate platforms provides observational constraints on regional tectonics and sea-level history. In this work Miocene-aged carbonate platform units of the Seroe Domi Formation are investigated, on the island of Bonaire, located in the Southern Caribbean. Ground penetrating radar (GPR) was used to probe near-surface structural geometries associated with these lithologies. The single cross-island transect described herein allowed for continuous mapping of geologic structures on kilometer length scales. Numerical analysis was applied to the data in the form of k-means clustering of structure-parallel vectors derived from image structure tensors. This methodology enables radar facies along the survey transect to be semi-automatically mapped. The results provide subsurface evidence to support previous surficial and outcrop observations, and reveal complex stratigraphy within the platform. From the GPR data analysis, progradational clinoform geometries were observed on the northeast side of the island which supports the tectonics and depositional trends of the region. Furthermore, several leeward-side radar facies are identified which correlate to environments of deposition conducive to dolomitization via reflux mechanisms.

  2. Application of organic-geochemistry, coal-petrology and isotope-geochemistry to facies-analysis and hydrocarbon exploration in the NE-Paris Basin (Trias-Lias Luxemburg)

    Flekken, P.M.

    1978-01-01

    Triassic and Liassic sediments of NE-Paris Basin (Luxemburg) were investigated by organic-geochemical, coal petrographical and isotope-geochemical methods. The objective was to characterize the stratigraphic stages and to investigate the facies relations between them with a view to possible hydrocarbon exploration. The sediments contain an average of 3.1% organic carbon, 413 ug/g extractable organic matter (bitumen) and 0.65% insoluble, isolatable organic particles which constitute part of the kerogen. The non-isolatable kerogen is 2.4% of the whole rock. (orig./BR) [de

  3. Spectral analysis and filter theory in applied geophysics

    Buttkus, Burkhard

    2000-01-01

    This book is intended to be an introduction to the fundamentals and methods of spectral analysis and filter theory and their appli­ cations in geophysics. The principles and theoretical basis of the various methods are described, their efficiency and effectiveness eval­ uated, and instructions provided for their practical application. Be­ sides the conventional methods, newer methods arediscussed, such as the spectral analysis ofrandom processes by fitting models to the ob­ served data, maximum-entropy spectral analysis and maximum-like­ lihood spectral analysis, the Wiener and Kalman filtering methods, homomorphic deconvolution, and adaptive methods for nonstation­ ary processes. Multidimensional spectral analysis and filtering, as well as multichannel filters, are given extensive treatment. The book provides a survey of the state-of-the-art of spectral analysis and fil­ ter theory. The importance and possibilities ofspectral analysis and filter theory in geophysics for data acquisition, processing an...

  4. Animal research in the Journal of Applied Behavior Analysis.

    Edwards, Timothy L; Poling, Alan

    2011-01-01

    This review summarizes the 6 studies with nonhuman animal subjects that have appeared in the Journal of Applied Behavior Analysis and offers suggestions for future research in this area. Two of the reviewed articles described translational research in which pigeons were used to illustrate and examine behavioral phenomena of applied significance (say-do correspondence and fluency), 3 described interventions that changed animals' behavior (self-injury by a baboon, feces throwing and spitting by a chimpanzee, and unsafe trailer entry by horses) in ways that benefited the animals and the people in charge of them, and 1 described the use of trained rats that performed a service to humans (land-mine detection). We suggest that each of these general research areas merits further attention and that the Journal of Applied Behavior Analysis is an appropriate outlet for some of these publications.

  5. Applied Behavior Analysis Is a Science And, Therefore, Progressive

    Leaf, Justin B.; Leaf, Ronald; McEachin, John; Taubman, Mitchell; Ala'i-Rosales, Shahla; Ross, Robert K.; Smith, Tristram; Weiss, Mary Jane

    2016-01-01

    Applied behavior analysis (ABA) is a science and, therefore, involves progressive approaches and outcomes. In this commentary we argue that the spirit and the method of science should be maintained in order to avoid reductionist procedures, stifled innovation, and rote, unresponsive protocols that become increasingly removed from meaningful…

  6. X-ray fluorescence spectrometry applied to soil analysis

    Salvador, Vera Lucia Ribeiro; Sato, Ivone Mulako; Scapin Junior, Wilson Santo; Scapin, Marcos Antonio; Imakima, Kengo

    1997-01-01

    This paper studies the X-ray fluorescence spectrometry applied to the soil analysis. A comparative study of the WD-XRFS and ED-XRFS techniques was carried out by using the following soil samples: SL-1, SOIL-7 and marine sediment SD-M-2/TM, from IAEA, and clay, JG-1a from Geological Survey of Japan (GSJ)

  7. Progressive-Ratio Schedules and Applied Behavior Analysis

    Poling, Alan

    2010-01-01

    Establishing appropriate relations between the basic and applied areas of behavior analysis has been of long and persistent interest to the author. In this article, the author illustrates that there is a direct relation between how hard an organism will work for access to an object or activity, as indexed by the largest ratio completed under a…

  8. B. F. Skinner's Contributions to Applied Behavior Analysis

    Morris, Edward K.; Smith, Nathaniel G.; Altus, Deborah E.

    2005-01-01

    Our paper reviews and analyzes B. F. Skinner's contributions to applied behavior analysis in order to assess his role as the field's originator and founder. We found, first, that his contributions fall into five categorizes: the style and content of his science, his interpretations of typical and atypical human behavior, the implications he drew…

  9. Applied Behavior Analysis: Current Myths in Public Education

    Fielding, Cheryl; Lowdermilk, John; Lanier, Lauren L.; Fannin, Abigail G.; Schkade, Jennifer L.; Rose, Chad A.; Simpson, Cynthia G.

    2013-01-01

    The effective use of behavior management strategies and related policies continues to be a debated issue in public education. Despite overwhelming evidence espousing the benefits of the implementation of procedures derived from principles based on the science of applied behavior analysis (ABA), educators often indicate many common misconceptions…

  10. Positive Behavior Support and Applied Behavior Analysis: A Familial Alliance

    Dunlap, Glen; Carr, Edward G.; Horner, Robert H.; Zarcone, Jennifer R.; Schwartz, Ilene

    2008-01-01

    Positive behavior support (PBS) emerged in the mid-1980s as an approach for understanding and addressing problem behaviors. PBS was derived primarily from applied behavior analysis (ABA). Over time, however, PBS research and practice has incorporated evaluative methods, assessment and intervention procedures, and conceptual perspectives associated…

  11. Neutron activation analysis applied to energy and environment

    Lyon, W.S.

    1975-01-01

    Neutron activation analysis was applied to a number of problems concerned with energy production and the environment. Burning of fossil fuel, the search for new sources of uranium, possible presence of toxic elements in food and water, and the relationship of trace elements to cardiovascular disease are some of the problems in which neutron activation was used. (auth)

  12. Structural reliability analysis applied to pipeline risk analysis

    Gardiner, M. [GL Industrial Services, Loughborough (United Kingdom); Mendes, Renato F.; Donato, Guilherme V.P. [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil)

    2009-07-01

    Quantitative Risk Assessment (QRA) of pipelines requires two main components to be provided. These are models of the consequences that follow from some loss of containment incident, and models for the likelihood of such incidents occurring. This paper describes how PETROBRAS have used Structural Reliability Analysis for the second of these, to provide pipeline- and location-specific predictions of failure frequency for a number of pipeline assets. This paper presents an approach to estimating failure rates for liquid and gas pipelines, using Structural Reliability Analysis (SRA) to analyze the credible basic mechanisms of failure such as corrosion and mechanical damage. SRA is a probabilistic limit state method: for a given failure mechanism it quantifies the uncertainty in parameters to mathematical models of the load-resistance state of a structure and then evaluates the probability of load exceeding resistance. SRA can be used to benefit the pipeline risk management process by optimizing in-line inspection schedules, and as part of the design process for new construction in pipeline rights of way that already contain multiple lines. A case study is presented to show how the SRA approach has recently been used on PETROBRAS pipelines and the benefits obtained from it. (author)

  13. Research in applied mathematics, numerical analysis, and computer science

    1984-01-01

    Research conducted at the Institute for Computer Applications in Science and Engineering (ICASE) in applied mathematics, numerical analysis, and computer science is summarized and abstracts of published reports are presented. The major categories of the ICASE research program are: (1) numerical methods, with particular emphasis on the development and analysis of basic numerical algorithms; (2) control and parameter identification; (3) computational problems in engineering and the physical sciences, particularly fluid dynamics, acoustics, and structural analysis; and (4) computer systems and software, especially vector and parallel computers.

  14. Applied Fourier analysis from signal processing to medical imaging

    Olson, Tim

    2017-01-01

    The first of its kind, this focused textbook serves as a self-contained resource for teaching from scratch the fundamental mathematics of Fourier analysis and illustrating some of its most current, interesting applications, including medical imaging and radar processing. Developed by the author from extensive classroom teaching experience, it provides a breadth of theory that allows students to appreciate the utility of the subject, but at as accessible a depth as possible. With myriad applications included, this book can be adapted to a one or two semester course in Fourier Analysis or serve as the basis for independent study. Applied Fourier Analysis assumes no prior knowledge of analysis from its readers, and begins by making the transition from linear algebra to functional analysis. It goes on to cover basic Fourier series and Fourier transforms before delving into applications in sampling and interpolation theory, digital communications, radar processing, medical i maging, and heat and wave equations. Fo...

  15. Applying DEA sensitivity analysis to efficiency measurement of Vietnamese universities

    Thi Thanh Huyen Nguyen

    2015-11-01

    Full Text Available The primary purpose of this study is to measure the technical efficiency of 30 doctorate-granting universities, the universities or the higher education institutes with PhD training programs, in Vietnam, applying the sensitivity analysis of data envelopment analysis (DEA. The study uses eight sets of input-output specifications using the replacement as well as aggregation/disaggregation of variables. The measurement results allow us to examine the sensitivity of the efficiency of these universities with the sets of variables. The findings also show the impact of variables on their efficiency and its “sustainability”.

  16. Dowód prima facie w postępowaniu cywilnym dotyczącym szkód powstałych w związku z leczeniem

    Białkowski, Michał

    2014-01-01

    The objective of this paper is to present main perspectives expressed by representatives of Polish legal doctrine as well as several examples of applications of prima facie evidence in legal cases submitted to Polish Supreme Court. Although not codified in Polish civil procedure prima facie evidence is applied in cases concerning claims for compensation for damages such as those occurred during medical treatment or inflicted by employees. The paper tries to answer whether prima facie evidence...

  17. Parts-based geophysical inversion with application to water flooding interface detection and geological facies detection

    Zhang, Junwei

    I built parts-based and manifold based mathematical learning model for the geophysical inverse problem and I applied this approach to two problems. One is related to the detection of the oil-water encroachment front during the water flooding of an oil reservoir. In this application, I propose a new 4D inversion approach based on the Gauss-Newton approach to invert time-lapse cross-well resistance data. The goal of this study is to image the position of the oil-water encroachment front in a heterogeneous clayey sand reservoir. This approach is based on explicitly connecting the change of resistivity to the petrophysical properties controlling the position of the front (porosity and permeability) and to the saturation of the water phase through a petrophysical resistivity model accounting for bulk and surface conductivity contributions and saturation. The distributions of the permeability and porosity are also inverted using the time-lapse resistivity data in order to better reconstruct the position of the oil water encroachment front. In our synthetic test case, we get a better position of the front with the by-products of porosity and permeability inferences near the flow trajectory and close to the wells. The numerical simulations show that the position of the front is recovered well but the distribution of the recovered porosity and permeability is only fair. A comparison with a commercial code based on a classical Gauss-Newton approach with no information provided by the two-phase flow model fails to recover the position of the front. The new approach could be also used for the time-lapse monitoring of various processes in both geothermal fields and oil and gas reservoirs using a combination of geophysical methods. A paper has been published in Geophysical Journal International on this topic and I am the first author of this paper. The second application is related to the detection of geological facies boundaries and their deforation to satisfy to geophysica

  18. Advanced GPR imaging of sedimentary features: integrated attribute analysis applied to sand dunes

    Zhao, Wenke; Forte, Emanuele; Fontolan, Giorgio; Pipan, Michele

    2018-04-01

    We evaluate the applicability and the effectiveness of integrated GPR attribute analysis to image the internal sedimentary features of the Piscinas Dunes, SW Sardinia, Italy. The main objective is to explore the limits of GPR techniques to study sediment-bodies geometry and to provide a non-invasive high-resolution characterization of the different subsurface domains of dune architecture. On such purpose, we exploit the high-quality Piscinas data-set to extract and test different attributes of the GPR trace. Composite displays of multi-attributes related to amplitude, frequency, similarity and textural features are displayed with overlays and RGB mixed models. A multi-attribute comparative analysis is used to characterize different radar facies to better understand the characteristics of internal reflection patterns. The results demonstrate that the proposed integrated GPR attribute analysis can provide enhanced information about the spatial distribution of sediment bodies, allowing an enhanced and more constrained data interpretation.

  19. Non-marine carbonate facies, facies models and palaeogeographies of the Purbeck Formation (Late Jurassic to Early Cretaceous) of Dorset (Southern England).

    Gallois, Arnaud; Bosence, Dan; Burgess, Peter

    2015-04-01

    Non-marine carbonates are relatively poorly understood compared with their more abundant marine counterparts. Sedimentary facies and basin architecture are controlled by a range of environmental parameters such as climate, hydrology and tectonic setting but facies models are few and limited in their predictive value. Following the discovery of extensive Early Cretaceous, non-marine carbonate hydrocarbon reservoirs in the South Atlantic, the interest of understanding such complex deposits has increased during recent years. This study is developing a new depositional model for non-marine carbonates in a semi-arid climate setting in an extensional basin; the Purbeck Formation (Upper Jurassic - Lower Cretaceous) in Dorset (Southern England). Outcrop study coupled with subsurface data analysis and petrographic study (sedimentology and early diagenesis) aims to constrain and improve published models of depositional settings. Facies models for brackish water and hypersaline water conditions of these lacustrine to palustrine carbonates deposited in the syn-rift phase of the Wessex Basin will be presented. Particular attention focusses on the factors that control the accumulation of in-situ microbialite mounds that occur within bedded inter-mound packstones-grainstones in the lower Purbeck. The microbialite mounds are located in three units (locally known as the Skull Cap, the Hard Cap and the Soft Cap) separated by three fossil soils (locally known as the Basal, the Lower and the Great Dirt Beds) respectively within three shallowing upward lacustrine sequences. These complex microbialite mounds (up to 4m high), are composed of tabular small-scale mounds (flat and long, up to 50cm high) divided into four subfacies. Many of these small-scale mounds developed around trees and branches which are preserved as moulds (or silicified wood) which are surrounded by a burrowed mudstone-wackestone collar. Subsequently a thrombolite framework developed on the upper part only within

  20. The intrusive complexof the Island of Giglio: geomagnetic characteristics of plutonic facies with low susceptibility contrast

    R. Cavallini

    1998-06-01

    Full Text Available Two main plutonic facies characterize the intrusive complex of the Island of Giglio, and the trend of their contact at depth has been modelled using a 2D½ analysis based on a detailed geomagnetic survey in order to verify the geological hypothesis of the subsurface geometry of this contact. The magnetic anomaly connected with the discontinuity is quite low, due to the small difference between the magnetic susceptibilities of the two granitic facies. Development of this model of inversion of the magnetic field, which is in good agreement with the geological interpretation, was made possible by: 1 accurate control of the geomagnetic time variations and consequent temporal reduction, 2 a very low level of the artificial magnetic noise, 3 high density of the magnetic survey, 4 detailed knowledge of the mapped geologic contact between facies and of their petrologic characteristics, and 5 direct local measurements of the magnetic susceptibilities of the key lithologies. The model shows the trends of the geological contact, as projected in three E-W sections, that dips eastward in the range between 210 and 540, supporting the geologic hypothesis that the Pietrabona facies represents an external shell of the shallowly emplaced Giglio monzogranite intrusion.

  1. Application of probabilistic facies prediction and estimation of rock physics parameters in a carbonate reservoir from Iran

    Karimpouli, Sadegh; Hassani, Hossein; Nabi-Bidhendi, Majid; Khoshdel, Hossein; Malehmir, Alireza

    2013-01-01

    In this study, a carbonate field from Iran was studied. Estimation of rock properties such as porosity and permeability is much more challenging in carbonate rocks than sandstone rocks because of their strong heterogeneity. The frame flexibility factor (γ) is a rock physics parameter which is related not only to pore structure variation but also to solid/pore connectivity and rock texture in carbonate reservoirs. We used porosity, frame flexibility factor and bulk modulus of fluid as the proper parameters to study this gas carbonate reservoir. According to rock physics parameters, three facies were defined: favourable and unfavourable facies and then a transition facies located between these two end members. To capture both the inversion solution and associated uncertainty, a complete implementation of the Bayesian inversion of the facies from pre-stack seismic data was applied to well data and validated with data from another well. Finally, this method was applied on a 2D seismic section and, in addition to inversion of petrophysical parameters, the high probability distribution of favorable facies was also obtained. (paper)

  2. Analysis of concrete beams using applied element method

    Lincy Christy, D.; Madhavan Pillai, T. M.; Nagarajan, Praveen

    2018-03-01

    The Applied Element Method (AEM) is a displacement based method of structural analysis. Some of its features are similar to that of Finite Element Method (FEM). In AEM, the structure is analysed by dividing it into several elements similar to FEM. But, in AEM, elements are connected by springs instead of nodes as in the case of FEM. In this paper, background to AEM is discussed and necessary equations are derived. For illustrating the application of AEM, it has been used to analyse plain concrete beam of fixed support condition. The analysis is limited to the analysis of 2-dimensional structures. It was found that the number of springs has no much influence on the results. AEM could predict deflection and reactions with reasonable degree of accuracy.

  3. Apply Functional Modelling to Consequence Analysis in Supervision Systems

    Zhang, Xinxin; Lind, Morten; Gola, Giulio

    2013-01-01

    This paper will first present the purpose and goals of applying functional modelling approach to consequence analysis by adopting Multilevel Flow Modelling (MFM). MFM Models describe a complex system in multiple abstraction levels in both means-end dimension and whole-part dimension. It contains...... consequence analysis to practical or online applications in supervision systems. It will also suggest a multiagent solution as the integration architecture for developing tools to facilitate the utilization results of functional consequence analysis. Finally a prototype of the multiagent reasoning system...... causal relations between functions and goals. A rule base system can be developed to trace the causal relations and perform consequence propagations. This paper will illustrate how to use MFM for consequence reasoning by using rule base technology and describe the challenges for integrating functional...

  4. Analysis of Brick Masonry Wall using Applied Element Method

    Lincy Christy, D.; Madhavan Pillai, T. M.; Nagarajan, Praveen

    2018-03-01

    The Applied Element Method (AEM) is a versatile tool for structural analysis. Analysis is done by discretising the structure as in the case of Finite Element Method (FEM). In AEM, elements are connected by a set of normal and shear springs instead of nodes. AEM is extensively used for the analysis of brittle materials. Brick masonry wall can be effectively analyzed in the frame of AEM. The composite nature of masonry wall can be easily modelled using springs. The brick springs and mortar springs are assumed to be connected in series. The brick masonry wall is analyzed and failure load is determined for different loading cases. The results were used to find the best aspect ratio of brick to strengthen brick masonry wall.

  5. Mapping Depositional Facies on Great Bahama Bank: An Integration of Groundtruthing and Remote Sensing Methods

    Hariss, M.; Purkis, S.; Ellis, J. M.; Swart, P. K.; Reijmer, J.

    2013-12-01

    Great Bahama Bank (GBB) has been used in many models to illustrate depositional facies variation across flat-topped, isolated carbonate platforms. Such models have served as subsurface analogs at a variety of scales. In this presentation we have integrated Landsat TM imagery, a refined bathymetric digital elevation model, and seafloor sample data compiled into ArcGIS and analyzed with eCognition to develop a depositional facies map that is more robust than previous versions. For the portion of the GBB lying to the west of Andros Island, the facies map was generated by pairing an extensive set of GPS-constrained field observations and samples (n=275) (Reijmer et al., 2009, IAS Spec Pub 41) with computer and manual interpretation of the Landsat imagery. For the remainder of the platform, which lacked such rigorous ground-control, the Landsat imagery was segmented into lithotopes - interpreted to be distinct bodies of uniform sediment - using a combination of edge detection, spectral and textural analysis, and manual editing. A map was then developed by assigning lithotopes to facies classes on the basis of lessons derived from the portion of the platform for which we had rigorous conditioning. The new analysis reveals that GBB is essentially a very grainy platform with muddier accumulations only in the lee of substantial island barriers; in this regard Andros Island, which is the largest island on GBB, exerts a direct control over the muddiest portion of GBB. Mudstones, wackestones, and mud-rich packstones cover 7%, 6%, and 15%, respectively, of the GBB platform top. By contrast, mud-poor packstones, grainstones, and rudstones account for 19%, 44%, and 3%, respectively. Of the 44% of the platform-top classified as grainstone, only 4% is composed of 'high-energy' deposits characterized by the development of sandbar complexes. The diversity and size of facies bodies is broadly the same on the eastern and western limb of the GBB platform, though the narrower eastern

  6. Applied research and development of neutron activation analysis

    Chung, Yong Sam; Moon, Jong Hwa; Kim, Sun Ha; Baek, Sung Ryel; Kim, Young Gi; Jung, Hwan Sung; Park, Kwang Won; Kang, Sang Hun; Lim, Jong Myoung

    2003-05-01

    The aims of this project are to establish the quality control system of Neutron Activation Analysis(NAA) due to increase of industrial needs for standard analytical method and to prepare and identify the standard operation procedure of NAA through practical testing for different analytical items. R and D implementations of analytical quality system using neutron irradiation facility and gamma-ray measurement system and automation of NAA facility in HANARO research reactor are as following ; 1) Establishment of NAA quality control system for the maintenance of best measurement capability and the promotion of utilization of HANARO research reactor 2) Improvement of analytical sensitivity for industrial applied technologies and establishment of certified standard procedures 3) Standardization and development of Prompt Gamma-ray Activation Analysis (PGAA) technology

  7. Elastic properties of granulite facies rocks of Mahabalipuram, Tamil ...

    the granulite facies rocks have helped us to under- stand the metamorphic ... imperative need to make new and accurate lab- .... the driving side and a digital storage oscilloscope ..... propagation in rocks and other lossy media: An experi-.

  8. Automated SEM Modal Analysis Applied to the Diogenites

    Bowman, L. E.; Spilde, M. N.; Papike, James J.

    1996-01-01

    Analysis of volume proportions of minerals, or modal analysis, is routinely accomplished by point counting on an optical microscope, but the process, particularly on brecciated samples such as the diogenite meteorites, is tedious and prone to error by misidentification of very small fragments, which may make up a significant volume of the sample. Precise volume percentage data can be gathered on a scanning electron microscope (SEM) utilizing digital imaging and an energy dispersive spectrometer (EDS). This form of automated phase analysis reduces error, and at the same time provides more information than could be gathered using simple point counting alone, such as particle morphology statistics and chemical analyses. We have previously studied major, minor, and trace-element chemistry of orthopyroxene from a suite of diogenites. This abstract describes the method applied to determine the modes on this same suite of meteorites and the results of that research. The modal abundances thus determined add additional information on the petrogenesis of the diogenites. In addition, low-abundance phases such as spinels were located for further analysis by this method.

  9. Applying Authentic Data Analysis in Learning Earth Atmosphere

    Johan, H.; Suhandi, A.; Samsudin, A.; Wulan, A. R.

    2017-09-01

    The aim of this research was to develop earth science learning material especially earth atmosphere supported by science research with authentic data analysis to enhance reasoning through. Various earth and space science phenomenon require reasoning. This research used experimental research with one group pre test-post test design. 23 pre-service physics teacher participated in this research. Essay test was conducted to get data about reason ability. Essay test was analyzed quantitatively. Observation sheet was used to capture phenomena during learning process. The results showed that student’s reasoning ability improved from unidentified and no reasoning to evidence based reasoning and inductive/deductive rule-based reasoning. Authentic data was considered using Grid Analysis Display System (GrADS). Visualization from GrADS facilitated students to correlate the concepts and bring out real condition of nature in classroom activity. It also helped student to reason the phenomena related to earth and space science concept. It can be concluded that applying authentic data analysis in learning process can help to enhance students reasoning. This study is expected to help lecture to bring out result of geoscience research in learning process and facilitate student understand concepts.

  10. Applied research and development of neutron activation analysis

    Chung, Yong Sam; Moon, Jong Hwa; Kim, Sun Ha; Bak, Sung Ryel; Park, Yong Chul; Kim, Young Ki; Chung, Hwan Sung; Park, Kwang Won; Kang, Sang Hun

    2000-05-01

    This report is written for results of research and development as follows : improvement of neutron irradiation facilities, counting system and development of automation system and capsules for NAA in HANARO ; improvement of analytical procedures and establishment of analytical quality control and assurance system; applied research and development of environment, industry and human health and its standardization. For identification and standardization of analytical method, environmental biological samples and polymer are analyzed and uncertainity of measurement are estimated. Also data intercomparison and proficency test were performed. Using airborne particulate matter chosen as a environmental indicators, trace elemental concentrations of sample collected at urban and rural site are determined and then the calculation of statistics and the factor analysis are carried out for investigation of emission source. International cooperation research project was carried out for utilization of nuclear techniques.

  11. Applied research and development of neutron activation analysis

    Chung, Yong Sam; Moon, Jong Hwa; Kim, Sun Ha; Bak, Sung Ryel; Park, Yong Chul; Kim, Young Ki; Chung, Hwan Sung; Park, Kwang Won; Kang, Sang Hun

    2000-05-01

    This report is written for results of research and development as follows : improvement of neutron irradiation facilities, counting system and development of automation system and capsules for NAA in HANARO ; improvement of analytical procedures and establishment of analytical quality control and assurance system; applied research and development of environment, industry and human health and its standardization. For identification and standardization of analytical method, environmental biological samples and polymer are analyzed and uncertainity of measurement are estimated. Also data intercomparison and proficency test were performed. Using airborne particulate matter chosen as a environmental indicators, trace elemental concentrations of sample collected at urban and rural site are determined and then the calculation of statistics and the factor analysis are carried out for investigation of emission source. International cooperation research project was carried out for utilization of nuclear techniques

  12. Fine-Grained Turbidites: Facies, Attributes and Process Implications

    Stow, Dorrik; Omoniyi, Bayonle

    2016-04-01

    Within turbidite systems, fine-grained sediments are still the poor relation and sport several contrasting facies models linked to process of deposition. These are volumetrically the dominant facies in deepwater and, from a resource perspective, they form important marginal and tight reservoirs, and have great potential for unconventional shale gas, source rocks and seals. They are also significant hosts of metals and rare earth elements. Based on a large number of studies of modern, ancient and subsurface systems, including 1000s of metres of section logging, we define the principal genetic elements of fine-grained deepwater facies, present a new synthesis of facies models and their sedimentary attributes. The principal architectural elements include: non-channelised slope-aprons, channel-fill, channel levee and overbank, turbidite lobes, mass-transport deposits, contourite drifts, basin sheets and drapes. These comprise a variable intercalation of fine-grained facies - thin-bedded and very thin-bedded turbidites, contourites, hemipelagites and pelagites - and associated coarse-grained facies. Characteristic attributes used to discriminate between these different elements are: facies and facies associations; sand-shale ratio, sand and shale geometry and dimensions, sand connectivity; sediment texture and small-scale sedimentary structures; sediment fabric and microfabric; and small-scale vertical sequences of bed thickness. To some extent, we can relate facies and attribute characteristics to different depositional environments. We identify four distinct facies models: (a) silt-laminated mud turbidites, (b) siliciclastic mud turbidites, (c) carbonate mud turbidites, (d) disorganized silty-mud turbidites, and (e) hemiturbidites. Within the grainsize-velocity matrix turbidite plot, these all fall within the region of mean size < 0.063mm, maximum grainsize (one percentile) <0.2mm, and depositional velocity 0.1-0.5 m/s. Silt-laminated turbidites and many mud

  13. Applying Conjoint Analysis to Study Attitudes of Thai Government Organisations

    Natee Suriyanon

    2012-11-01

    Full Text Available This article presents the application of choice-based conjointanalysis to analyse the attitude of Thai government organisationstowards the restriction of the contractor’s right to claimcompensation for unfavourable effects from undesirable events.The analysis reveals that the organisations want to restrict only 6out of 14 types of the claiming rights that were studied. The rightthat they want to restrict most is the right to claim for additionaldirect costs due to force majeure. They are willing to pay between0.087% - 0.210% of the total project direct cost for restricting eachtype of contractor right. The total additional cost for restrictingall six types of rights that the organisations are willing to pay is0.882%. The last section of this article applies the knowledgegained from a choice based conjoint analysis experiment to theanalysis of the standard contract of the Thai government. Theanalysis reveals three types of rights where Thai governmentorganisations are willing to forego restrictions, but the presentstandard contract does not grant such rights.

  14. The Evidence-Based Practice of Applied Behavior Analysis.

    Slocum, Timothy A; Detrich, Ronnie; Wilczynski, Susan M; Spencer, Trina D; Lewis, Teri; Wolfe, Katie

    2014-05-01

    Evidence-based practice (EBP) is a model of professional decision-making in which practitioners integrate the best available evidence with client values/context and clinical expertise in order to provide services for their clients. This framework provides behavior analysts with a structure for pervasive use of the best available evidence in the complex settings in which they work. This structure recognizes the need for clear and explicit understanding of the strength of evidence supporting intervention options, the important contextual factors including client values that contribute to decision making, and the key role of clinical expertise in the conceptualization, intervention, and evaluation of cases. Opening the discussion of EBP in this journal, Smith (The Behavior Analyst, 36, 7-33, 2013) raised several key issues related to EBP and applied behavior analysis (ABA). The purpose of this paper is to respond to Smith's arguments and extend the discussion of the relevant issues. Although we support many of Smith's (The Behavior Analyst, 36, 7-33, 2013) points, we contend that Smith's definition of EBP is significantly narrower than definitions that are used in professions with long histories of EBP and that this narrowness conflicts with the principles that drive applied behavior analytic practice. We offer a definition and framework for EBP that aligns with the foundations of ABA and is consistent with well-established definitions of EBP in medicine, psychology, and other professions. In addition to supporting the systematic use of research evidence in behavior analytic decision making, this definition can promote clear communication about treatment decisions across disciplines and with important outside institutions such as insurance companies and granting agencies.

  15. Multiparameter Elastic Full Waveform Inversion with Facies-based Constraints

    Zhang, Zhen-dong; Alkhalifah, Tariq; Naeini, Ehsan Zabihi; Sun, Bingbing

    2018-03-01

    Full waveform inversion (FWI) incorporates all the data characteristics to estimate the parameters described by the assumed physics of the subsurface. However, current efforts to utilize full waveform inversion beyond improved acoustic imaging, like in reservoir delineation, faces inherent challenges related to the limited resolution and the potential trade-off between the elastic model parameters. Some anisotropic parameters are insufficiently updated because of their minor contributions to the surface collected data. Adding rock physics constraints to the inversion helps mitigate such limited sensitivity, but current approaches to add such constraints are based on including them as a priori knowledge mostly valid around the well or as a global constraint for the whole area. Since similar rock formations inside the Earth admit consistent elastic properties and relative values of elasticity and anisotropy parameters (this enables us to define them as a seismic facies), utilizing such localized facies information in FWI can improve the resolution of inverted parameters. We propose a novel approach to use facies-based constraints in both isotropic and anisotropic elastic FWI. We invert for such facies using Bayesian theory and update them at each iteration of the inversion using both the inverted models and a prior information. We take the uncertainties of the estimated parameters (approximated by radiation patterns) into consideration and improve the quality of estimated facies maps. Four numerical examples corresponding to different acquisition, physical assumptions and model circumstances are used to verify the effectiveness of the proposed method.

  16. Multiparameter elastic full waveform inversion with facies-based constraints

    Zhang, Zhen-dong; Alkhalifah, Tariq; Naeini, Ehsan Zabihi; Sun, Bingbing

    2018-06-01

    Full waveform inversion (FWI) incorporates all the data characteristics to estimate the parameters described by the assumed physics of the subsurface. However, current efforts to utilize FWI beyond improved acoustic imaging, like in reservoir delineation, faces inherent challenges related to the limited resolution and the potential trade-off between the elastic model parameters. Some anisotropic parameters are insufficiently updated because of their minor contributions to the surface collected data. Adding rock physics constraints to the inversion helps mitigate such limited sensitivity, but current approaches to add such constraints are based on including them as a priori knowledge mostly valid around the well or as a global constraint for the whole area. Since similar rock formations inside the Earth admit consistent elastic properties and relative values of elasticity and anisotropy parameters (this enables us to define them as a seismic facies), utilizing such localized facies information in FWI can improve the resolution of inverted parameters. We propose a novel approach to use facies-based constraints in both isotropic and anisotropic elastic FWI. We invert for such facies using Bayesian theory and update them at each iteration of the inversion using both the inverted models and a priori information. We take the uncertainties of the estimated parameters (approximated by radiation patterns) into consideration and improve the quality of estimated facies maps. Four numerical examples corresponding to different acquisition, physical assumptions and model circumstances are used to verify the effectiveness of the proposed method.

  17. Multiparameter Elastic Full Waveform Inversion with Facies-based Constraints

    Zhang, Zhendong

    2018-03-20

    Full waveform inversion (FWI) incorporates all the data characteristics to estimate the parameters described by the assumed physics of the subsurface. However, current efforts to utilize full waveform inversion beyond improved acoustic imaging, like in reservoir delineation, faces inherent challenges related to the limited resolution and the potential trade-off between the elastic model parameters. Some anisotropic parameters are insufficiently updated because of their minor contributions to the surface collected data. Adding rock physics constraints to the inversion helps mitigate such limited sensitivity, but current approaches to add such constraints are based on including them as a priori knowledge mostly valid around the well or as a global constraint for the whole area. Since similar rock formations inside the Earth admit consistent elastic properties and relative values of elasticity and anisotropy parameters (this enables us to define them as a seismic facies), utilizing such localized facies information in FWI can improve the resolution of inverted parameters. We propose a novel approach to use facies-based constraints in both isotropic and anisotropic elastic FWI. We invert for such facies using Bayesian theory and update them at each iteration of the inversion using both the inverted models and a prior information. We take the uncertainties of the estimated parameters (approximated by radiation patterns) into consideration and improve the quality of estimated facies maps. Four numerical examples corresponding to different acquisition, physical assumptions and model circumstances are used to verify the effectiveness of the proposed method.

  18. To apply or not to apply: a survey analysis of grant writing costs and benefits.

    von Hippel, Ted; von Hippel, Courtney

    2015-01-01

    We surveyed 113 astronomers and 82 psychologists active in applying for federally funded research on their grant-writing history between January, 2009 and November, 2012. We collected demographic data, effort levels, success rates, and perceived non-financial benefits from writing grant proposals. We find that the average proposal takes 116 PI hours and 55 CI hours to write; although time spent writing was not related to whether the grant was funded. Effort did translate into success, however, as academics who wrote more grants received more funding. Participants indicated modest non-monetary benefits from grant writing, with psychologists reporting a somewhat greater benefit overall than astronomers. These perceptions of non-financial benefits were unrelated to how many grants investigators applied for, the number of grants they received, or the amount of time they devoted to writing their proposals. We also explored the number of years an investigator can afford to apply unsuccessfully for research grants and our analyses suggest that funding rates below approximately 20%, commensurate with current NIH and NSF funding, are likely to drive at least half of the active researchers away from federally funded research. We conclude with recommendations and suggestions for individual investigators and for department heads.

  19. To apply or not to apply: a survey analysis of grant writing costs and benefits.

    Ted von Hippel

    Full Text Available We surveyed 113 astronomers and 82 psychologists active in applying for federally funded research on their grant-writing history between January, 2009 and November, 2012. We collected demographic data, effort levels, success rates, and perceived non-financial benefits from writing grant proposals. We find that the average proposal takes 116 PI hours and 55 CI hours to write; although time spent writing was not related to whether the grant was funded. Effort did translate into success, however, as academics who wrote more grants received more funding. Participants indicated modest non-monetary benefits from grant writing, with psychologists reporting a somewhat greater benefit overall than astronomers. These perceptions of non-financial benefits were unrelated to how many grants investigators applied for, the number of grants they received, or the amount of time they devoted to writing their proposals. We also explored the number of years an investigator can afford to apply unsuccessfully for research grants and our analyses suggest that funding rates below approximately 20%, commensurate with current NIH and NSF funding, are likely to drive at least half of the active researchers away from federally funded research. We conclude with recommendations and suggestions for individual investigators and for department heads.

  20. Applied genre analysis: a multi-perspective model

    Vijay K Bhatia

    2002-04-01

    Full Text Available Genre analysis can be viewed from two different perspectives: it may be seen as a reflection of the complex realities of the world of institutionalised communication, or it may be seen as a pedagogically effective and convenient tool for the design of language teaching programmes, often situated within simulated contexts of classroom activities. This paper makes an attempt to understand and resolve the tension between these two seemingly contentious perspectives to answer the question: "Is generic description a reflection of reality, or a convenient fiction invented by applied linguists?". The paper also discusses issues related to the nature and use of linguistic description in a genre-based educational enterprise, claiming that instead of using generic descriptions as models for linguistic reproduction of conventional forms to respond to recurring social contexts, as is often the case in many communication based curriculum contexts, they can be used as analytical resource to understand and manipulate complex inter-generic and multicultural realisations of professional discourse, which will enable learners to use generic knowledge to respond to novel social contexts and also to create new forms of discourse to achieve pragmatic success as well as other powerful human agendas.

  1. SUCCESS CONCEPT ANALYSIS APPLIED TO THE INFORMATION TECHNOLOGY PROJECT MANAGEMENT

    Cassio C. Montenegro Duarte

    2012-05-01

    Full Text Available This study evaluates the concept of success in project management that is applicable to the IT universe, from the classical theory associated with the techniques of project management. Therefore, it applies the theoretical analysis associated to the context of information technology in enterprises as well as the classic literature of traditional project management, focusing on its application in business information technology. From the literature developed in the first part of the study, four propositions were prepared for study which formed the basis for the development of the field research with three large companies that develop projects of Information Technology. The methodology used in the study predicted the development of the multiple case study. Empirical evidence suggests that the concept of success found in the classical literature in project management adjusts to the environment management of IT projects. Showed that it is possible to create the model of standard IT projects in order to replicate it in future derivatives projects, which depends on the learning acquired at the end of a long and continuous process and sponsorship of senior management, which ultimately results in its merger into the company culture.

  2. Applying importance-performance analysis to patient safety culture.

    Lee, Yii-Ching; Wu, Hsin-Hung; Hsieh, Wan-Lin; Weng, Shao-Jen; Hsieh, Liang-Po; Huang, Chih-Hsuan

    2015-01-01

    The Sexton et al.'s (2006) safety attitudes questionnaire (SAQ) has been widely used to assess staff's attitudes towards patient safety in healthcare organizations. However, to date there have been few studies that discuss the perceptions of patient safety both from hospital staff and upper management. The purpose of this paper is to improve and to develop better strategies regarding patient safety in healthcare organizations. The Chinese version of SAQ based on the Taiwan Joint Commission on Hospital Accreditation is used to evaluate the perceptions of hospital staff. The current study then lies in applying importance-performance analysis technique to identify the major strengths and weaknesses of the safety culture. The results show that teamwork climate, safety climate, job satisfaction, stress recognition and working conditions are major strengths and should be maintained in order to provide a better patient safety culture. On the contrary, perceptions of management and hospital handoffs and transitions are important weaknesses and should be improved immediately. Research limitations/implications - The research is restricted in generalizability. The assessment of hospital staff in patient safety culture is physicians and registered nurses. It would be interesting to further evaluate other staff's (e.g. technicians, pharmacists and others) opinions regarding patient safety culture in the hospital. Few studies have clearly evaluated the perceptions of healthcare organization management regarding patient safety culture. Healthcare managers enable to take more effective actions to improve the level of patient safety by investigating key characteristics (either strengths or weaknesses) that healthcare organizations should focus on.

  3. Applying multicriteria analysis for choosing the best marination for pork

    Nieto VMOS

    2015-01-01

    Full Text Available Objective. This research aimed to choose a best marination solution using the Analytic Hierarchy Process (AHP. Materials and methods. Pork meat samples were collected in a commercial slaughterhouse, and they were randomly distributed in four treatments with three different salt contents blend. Color, pH, retention of the solution, exudate and cooking loss, shear force and sensory attributes were assessed and evaluated. Multicriteria analysis using AHP was applied to the results in order to choose the best overall marination solution. Criteria used for selection were the physical and sensory characteristics of meat, and based on these criteria were classified solutions marination. Results. Results showed that the combination of the salts was the best alternative (Na2CO3+NaCl+Na5P3O10, followed by the solutions of (Na2CO3 + NaCl, and (Na5P3O10 + NaCl. Conclusions. All tested solutions with the salts used alone or in combination led to better physical and sensory attributes than the meat not marinated.

  4. Fluvial to Lacustrine Facies Transitions in Gale Crater, Mars

    Sumner, Dawn Y.; Williams, Rebecca M. E.; Schieber, Juergen; Palucis, Marisa C.; Oehler, Dorothy Z.; Mangold, Nicolas; Kah, Linda C.; Gupta, Sanjeev; Grotzinger, John P.; Grant, John A., III; hide

    2015-01-01

    NASA's Curiosity rover has documented predominantly fluvial sedimentary rocks along its path from the landing site to the toe of the Peace Vallis alluvial fan (0.5 km to the east) and then along its 8 km traverse across Aeolis Palus to the base of Aeolis Mons (Mount Sharp). Lacustrine facies have been identified at the toe of the Peace Vallis fan and in the lowermost geological unit exposed on Aeolis Mons. These two depositional systems provide end members for martian fluvial/alluvial-lacustrine facies models. The Peace Vallis system consisted of an 80 square kilometers alluvial fan with decimeter-thick, laterally continuous fluvial sandstones with few sedimentary structures. The thin lacustrine unit associated with the fan is interpreted as deposited in a small lake associated with fan runoff. In contrast, fluvial facies exposed over most of Curiosity's traverse to Aeolis Mons consist of sandstones with common dune-scale cross stratification (including trough cross stratification), interbedded conglomerates, and rare paleochannels. Along the southwest portion of the traverse, sandstone facies include south-dipping meter-scale clinoforms that are interbedded with finer-grained mudstone facies, interpreted as lacustrine. Sedimentary structures in these deposits are consistent with deltaic deposits. Deltaic deposition is also suggested by the scale of fluvial to lacustrine facies transitions, which occur over greater than 100 m laterally and greater than 10 m vertically. The large scale of the transitions and the predicted thickness of lacustrine deposits based on orbital mapping require deposition in a substantial river-lake system over an extended interval of time. Thus, the lowermost, and oldest, sedimentary rocks in Gale Crater suggest the presence of substantial fluvial flow into a long-lived lake. In contrast, the Peace Vallis alluvial fan onlaps these older deposits and overlies a major unconformity. It is one of the youngest deposits in the crater, and

  5. Hydrothermal dolomite reservoir facies in the Sinian Dengying Fm, central Sichuan Basin

    Yuqiang Jiang

    2017-07-01

    Full Text Available The Upper Sinian Dengying Fm is the focus of natural gas exploration in the central part of the Sichuan Basin (central Sichuan Basin in recent years. Especially, epigenic karstification and its resulted reservoir-seepage spaces have always been the focal points in researches. Based on the petrographic characteristics of drilling cuttings and core samples, and through experimental analysis by using trace elements, isotopes, and cathodoluminescence, the Dengying Fm dolomite was demonstrated to have matrix recrystallized dolomite (MRD, filled saddle dolomite (FSD (the mean homogenization temperature of inclusion: 178.5 °C, high concentrations of Fe & Mn, slightly positive 87Sr/86Sr value and hydrothermal minerals combination (including sphalerite, galena, pyrite, and quartz, etc.. Thus, it was proposed that hydrothermal dolomite reservoir facies (HDRF exist in the Dengying Fm dolomite, in other words, the dolomite reservoir is composed of hydrothermal dissolved pores, intercrystalline pores of hydrothermal origin, hydrothermal caverns and expanded fractures, and was formed due to the reworking of hydrothermal fluid on tight matrix dolomite. Identification marks are presented in terms of petrography and geochemistry so that hydrothermal dolomite reservoir facies can be effectively recognized and identified. It is concluded that the development of hydrothermal dolomite reservoir facies in this area are preliminary controlled by deep and large basement faults and the strength of hydrothermal fluids.

  6. New trends in applied harmonic analysis sparse representations, compressed sensing, and multifractal analysis

    Cabrelli, Carlos; Jaffard, Stephane; Molter, Ursula

    2016-01-01

    This volume is a selection of written notes corresponding to courses taught at the CIMPA School: "New Trends in Applied Harmonic Analysis: Sparse Representations, Compressed Sensing and Multifractal Analysis". New interactions between harmonic analysis and signal and image processing have seen striking development in the last 10 years, and several technological deadlocks have been solved through the resolution of deep theoretical problems in harmonic analysis. New Trends in Applied Harmonic Analysis focuses on two particularly active areas that are representative of such advances: multifractal analysis, and sparse representation and compressed sensing. The contributions are written by leaders in these areas, and covers both theoretical aspects and applications. This work should prove useful not only to PhD students and postdocs in mathematics and signal and image processing, but also to researchers working in related topics.

  7. Current status of neutron activation analysis and applied nuclear chemistry

    Lyon, W.S.

    1990-01-01

    A review of recent scientometric studies of citations and publication data shows the present state of NAA and applied nuclear chemistry as compared to other analytical techniques. (author) 9 refs.; 7 tabs

  8. Uranium, rare metals, and granulite-facies metamorphism

    Michel Cuney

    2014-09-01

    The Tranomaro metasomatized marbles recrystallizing under granulite-facies conditions represent a demonstrative example of fluid transfer from granulite-facies supracrustals to traps represented by regional scale skarns. Such fluids may be at the origin of the incompatible element enrichment detected in leucosomes of migmatites from St Malo in Brittany (France and Black Hills in South Dakota. The northern French Massif Central provides us with an example of a potential association between incompatible element enrichment of granitic melts and granulite-facies metamorphism. U- and F-enriched fine-grained granites are emplaced along a crustal scale shear zone active during the emplacement within the St Sylvestre peraluminous leucogranitic complex. We propose that during granulite-facies metamorphism dominated by carbonic waves in a deep segment of the continental crust, these shear zones control: (i the percolation of F-, LILE-, rare metal-rich fluids liberated primarily by the breakdown of biotite; (ii the enhancement of partial melting by F-rich fluids at intermediate crustal levels with the generation of F-, LILE-, rare metal-rich granitic melts; (iii their transfer through the crust with protracted fractionation facilitated by their low viscosity due to high F-Li contents; and finally (iv their emplacement as rare metal intrusions at shallow crust levels.

  9. Late Permian (Zechstein) carbonate-facies maps, the Netherlands

    Geluk, M.C.

    2000-01-01

    The Late Permian Zechstein carbonates in the Southern Permian Basin were deposited under marine conditions. The carbonates form part of a largely progradational infill, with a gradual northward facies shift. The paleogeography of the Zechstein carbonate deposits has been reviewed recently on the

  10. Anthropogenic effects on sedimentary facies in Lake Baldeney, West Germany

    Neumann-Mahlkau, Peter; Niehaus, Heinz Theo

    1983-12-01

    Analysis of well logs of Lake Baldeney, a reservoir of the Ruhr River, yields four facies factors that reflect the effect of anthropogenic processes on the sediment. First, the sedimentation rate is directly related to the subsidence caused by mining. The extent of the subsidence was such that the sediment load of the river could not compensate for the sinking of the lake bottom. Discharged sediment filled about one-fifth of the basin within 40 years. In certain areas of the basin the sedimentation rate reached up to 10 cm per year. Second, the grain-size distribution of the sediment was influenced by long-term and short-term events. During the subsidence, grain-size distribution remained relatively constant. The destruction of the Möhne River dam during World War II resulted in the presence of an extremely large grain size as evidenced by the so-called Möhnelage. The filling of the lake after 1961 was accompanied by a continual increase in medium grain size. Third, until 1975, the mode of the lake sediment reflects the effect of mining in the vicinity of the lake. High coal content can be traced to its origin. The introduction of modern production processes, modernization of coal dressing, and hydraulic hauling is documented in the sediment. Finally, the heavy metal content of the sediment corresponds to the industrial development in the drainage area the Ruhr River. The accumulation of Cd reached an extreme concentration, exceeding the natural content by a thousand times. Variation in concentration reflects an increase in industrial production, as well as measures undertaken to restore water quality.

  11. RISK ANALYSIS APPLIED IN OIL EXPLORATION AND PRODUCTION

    ES Obe

    aDepartment of Civil Engineering, University of Nigeria, Nsukka, Enugu State, Nigeria. ... The analysis in this work is ... risk analysis, oil field, risk management, projects, investment opportunity. 1. .... own merit but since the company has limited.

  12. Empirical modeling and data analysis for engineers and applied scientists

    Pardo, Scott A

    2016-01-01

    This textbook teaches advanced undergraduate and first-year graduate students in Engineering and Applied Sciences to gather and analyze empirical observations (data) in order to aid in making design decisions. While science is about discovery, the primary paradigm of engineering and "applied science" is design. Scientists are in the discovery business and want, in general, to understand the natural world rather than to alter it. In contrast, engineers and applied scientists design products, processes, and solutions to problems. That said, statistics, as a discipline, is mostly oriented toward the discovery paradigm. Young engineers come out of their degree programs having taken courses such as "Statistics for Engineers and Scientists" without any clear idea as to how they can use statistical methods to help them design products or processes. Many seem to think that statistics is only useful for demonstrating that a device or process actually does what it was designed to do. Statistics courses emphasize creati...

  13. Applying thematic analysis theory to practice: a researcher's experience.

    Tuckett, Anthony G

    2005-01-01

    This article describes an experience of thematic analysis. In order to answer the question 'What does analysis look like in practice?' it describes in brief how the methodology of grounded theory, the epistemology of social constructionism, and the theoretical stance of symbolic interactionism inform analysis. Additionally, analysis is examined by evidencing the systematic processes--here termed organising, coding, writing, theorising, and reading--that led the researcher to develop a final thematic schema.

  14. Level-set techniques for facies identification in reservoir modeling

    Iglesias, Marco A.; McLaughlin, Dennis

    2011-03-01

    In this paper we investigate the application of level-set techniques for facies identification in reservoir models. The identification of facies is a geometrical inverse ill-posed problem that we formulate in terms of shape optimization. The goal is to find a region (a geologic facies) that minimizes the misfit between predicted and measured data from an oil-water reservoir. In order to address the shape optimization problem, we present a novel application of the level-set iterative framework developed by Burger in (2002 Interfaces Free Bound. 5 301-29 2004 Inverse Problems 20 259-82) for inverse obstacle problems. The optimization is constrained by (the reservoir model) a nonlinear large-scale system of PDEs that describes the reservoir dynamics. We reformulate this reservoir model in a weak (integral) form whose shape derivative can be formally computed from standard results of shape calculus. At each iteration of the scheme, the current estimate of the shape derivative is utilized to define a velocity in the level-set equation. The proper selection of this velocity ensures that the new shape decreases the cost functional. We present results of facies identification where the velocity is computed with the gradient-based (GB) approach of Burger (2002) and the Levenberg-Marquardt (LM) technique of Burger (2004). While an adjoint formulation allows the straightforward application of the GB approach, the LM technique requires the computation of the large-scale Karush-Kuhn-Tucker system that arises at each iteration of the scheme. We efficiently solve this system by means of the representer method. We present some synthetic experiments to show and compare the capabilities and limitations of the proposed implementations of level-set techniques for the identification of geologic facies.

  15. Level-set techniques for facies identification in reservoir modeling

    Iglesias, Marco A; McLaughlin, Dennis

    2011-01-01

    In this paper we investigate the application of level-set techniques for facies identification in reservoir models. The identification of facies is a geometrical inverse ill-posed problem that we formulate in terms of shape optimization. The goal is to find a region (a geologic facies) that minimizes the misfit between predicted and measured data from an oil–water reservoir. In order to address the shape optimization problem, we present a novel application of the level-set iterative framework developed by Burger in (2002 Interfaces Free Bound. 5 301–29; 2004 Inverse Problems 20 259–82) for inverse obstacle problems. The optimization is constrained by (the reservoir model) a nonlinear large-scale system of PDEs that describes the reservoir dynamics. We reformulate this reservoir model in a weak (integral) form whose shape derivative can be formally computed from standard results of shape calculus. At each iteration of the scheme, the current estimate of the shape derivative is utilized to define a velocity in the level-set equation. The proper selection of this velocity ensures that the new shape decreases the cost functional. We present results of facies identification where the velocity is computed with the gradient-based (GB) approach of Burger (2002) and the Levenberg–Marquardt (LM) technique of Burger (2004). While an adjoint formulation allows the straightforward application of the GB approach, the LM technique requires the computation of the large-scale Karush–Kuhn–Tucker system that arises at each iteration of the scheme. We efficiently solve this system by means of the representer method. We present some synthetic experiments to show and compare the capabilities and limitations of the proposed implementations of level-set techniques for the identification of geologic facies

  16. Measurement uncertainty analysis techniques applied to PV performance measurements

    Wells, C.

    1992-10-01

    The purpose of this presentation is to provide a brief introduction to measurement uncertainty analysis, outline how it is done, and illustrate uncertainty analysis with examples drawn from the PV field, with particular emphasis toward its use in PV performance measurements. The uncertainty information we know and state concerning a PV performance measurement or a module test result determines, to a significant extent, the value and quality of that result. What is measurement uncertainty analysis? It is an outgrowth of what has commonly been called error analysis. But uncertainty analysis, a more recent development, gives greater insight into measurement processes and tests, experiments, or calibration results. Uncertainty analysis gives us an estimate of the I interval about a measured value or an experiment's final result within which we believe the true value of that quantity will lie. Why should we take the time to perform an uncertainty analysis? A rigorous measurement uncertainty analysis: Increases the credibility and value of research results; allows comparisons of results from different labs; helps improve experiment design and identifies where changes are needed to achieve stated objectives (through use of the pre-test analysis); plays a significant role in validating measurements and experimental results, and in demonstrating (through the post-test analysis) that valid data have been acquired; reduces the risk of making erroneous decisions; demonstrates quality assurance and quality control measures have been accomplished; define Valid Data as data having known and documented paths of: Origin, including theory; measurements; traceability to measurement standards; computations; uncertainty analysis of results

  17. An applied general equilibrium model for Dutch agribusiness policy analysis

    Peerlings, J.

    1993-01-01

    The purpose of this thesis was to develop a basic static applied general equilibrium (AGE) model to analyse the effects of agricultural policy changes on Dutch agribusiness. In particular the effects on inter-industry transactions, factor demand, income, and trade are of

  18. How Has Applied Behavior Analysis and Behavior Therapy Changed?: An Historical Analysis of Journals

    O'Donohue, William; Fryling, Mitch

    2007-01-01

    Applied behavior analysis and behavior therapy are now nearly a half century old. It is interesting to ask if and how these disciplines have changed over time, particularly regarding some of their key internal controversies (e.g., role of cognitions). We examined the first five years and the 2000-2004 five year period of the "Journal of Applied…

  19. Measurement uncertainty analysis techniques applied to PV performance measurements

    Wells, C.

    1992-10-01

    The purpose of this presentation is to provide a brief introduction to measurement uncertainty analysis, outline how it is done, and illustrate uncertainty analysis with examples drawn from the PV field, with particular emphasis toward its use in PV performance measurements. The uncertainty information we know and state concerning a PV performance measurement or a module test result determines, to a significant extent, the value and quality of that result. What is measurement uncertainty analysis It is an outgrowth of what has commonly been called error analysis. But uncertainty analysis, a more recent development, gives greater insight into measurement processes and tests, experiments, or calibration results. Uncertainty analysis gives us an estimate of the I interval about a measured value or an experiment's final result within which we believe the true value of that quantity will lie. Why should we take the time to perform an uncertainty analysis A rigorous measurement uncertainty analysis: Increases the credibility and value of research results; allows comparisons of results from different labs; helps improve experiment design and identifies where changes are needed to achieve stated objectives (through use of the pre-test analysis); plays a significant role in validating measurements and experimental results, and in demonstrating (through the post-test analysis) that valid data have been acquired; reduces the risk of making erroneous decisions; demonstrates quality assurance and quality control measures have been accomplished; define Valid Data as data having known and documented paths of: Origin, including theory; measurements; traceability to measurement standards; computations; uncertainty analysis of results.

  20. Measurement uncertainty analysis techniques applied to PV performance measurements

    Wells, C

    1992-10-01

    The purpose of this presentation is to provide a brief introduction to measurement uncertainty analysis, outline how it is done, and illustrate uncertainty analysis with examples drawn from the PV field, with particular emphasis toward its use in PV performance measurements. The uncertainty information we know and state concerning a PV performance measurement or a module test result determines, to a significant extent, the value and quality of that result. What is measurement uncertainty analysis? It is an outgrowth of what has commonly been called error analysis. But uncertainty analysis, a more recent development, gives greater insight into measurement processes and tests, experiments, or calibration results. Uncertainty analysis gives us an estimate of the I interval about a measured value or an experiment`s final result within which we believe the true value of that quantity will lie. Why should we take the time to perform an uncertainty analysis? A rigorous measurement uncertainty analysis: Increases the credibility and value of research results; allows comparisons of results from different labs; helps improve experiment design and identifies where changes are needed to achieve stated objectives (through use of the pre-test analysis); plays a significant role in validating measurements and experimental results, and in demonstrating (through the post-test analysis) that valid data have been acquired; reduces the risk of making erroneous decisions; demonstrates quality assurance and quality control measures have been accomplished; define Valid Data as data having known and documented paths of: Origin, including theory; measurements; traceability to measurement standards; computations; uncertainty analysis of results.

  1. Heisenberg principle applied to the analysis of speckle interferometry fringes

    Sciammarella, C. A.; Sciammarella, F. M.

    2003-11-01

    Optical techniques that are used to measure displacements utilize a carrier. When a load is applied the displacement field modulates the carrier. The accuracy of the information that can be recovered from the modulated carrier is limited by a number of factors. In this paper, these factors are analyzed and conclusions concerning the limitations in information recovery are illustrated with examples taken from experimental data.

  2. Concluding Essay: On Applied Linguistics and Discourse Analysis.

    Kaplan, Robert B.

    1990-01-01

    Discusses trends and problems in regarding discourse analysis as a viable paradigm that can govern research, focusing on such issues as the wide diversity and variety of research that can be considered discourse analysis, the predominant focus on English language, research approaches, and undefined variables affecting research outcomes. (seven…

  3. The investigation of sedimentary facies and stacking pattern in the Mulid River (Southeastern Qayen

    Marzieh Fayazi Borujeni

    2017-03-01

    Full Text Available Introduction In the most gravel bed rivers, particle size exponentially decreases to the downstream. The study of particle size fining trend to the downstream and determination of the effective processes on it along the recent rivers is accomplished in the different parts of Iran. The river sedimentary facies are deposited in the channel and overbank areas and they are provided important information about sedimentary environment and deposition rate, the extent and development of the river channel and floodplain. These sedimentary facies that are deposited in the different depositional conditions have been achieved from variations of flow regime and/ or variation in the depositional environment in the large scale. The aim of this study is to investigate of the particle size variations and the effective controllers of fining trend to downstream, to determine of the important factors in creating sedimentary discontinuities and to study of the sedimentary facies, architectural elements, determination of depositional model and some paleohydraulic parameters of river. The Mulid River catchment with elongated shape is located in 120 km of southeast Qayen in the Southern Khorasan Province, in the 33̊ 24ʹ 44.3ʺ to 33̊ 35ʹ 11.4ʺ east latitude and 59̊ 56ʹ 42.5ʺ to 59̊ 58ʹ 44ʺ north longitude. According to the geological classification of Iran, this basin is a part of the East Iran flysch and mélange belt that is located in the east of the Lut Block.  Materials and Methods  In order to sedimentological studies, 30 sediment samples unsystematically were collected from upstream to downstream and from about 20 cm depth of the main channel bottom of river (with 30 km long. The granulometry analysis of the studied samples were achieved using the dry sieving method with 0.5 φ intervals and weight percent of gravel, sand and mud size particles were estimated. The sediment naming is done using Folk (1980 classification and the estimation of sorting

  4. Depositional facies mosaics and their time lines in Lower Ordovician carbonates of central Appalachians

    Nguyen, C.T.; Goldhammer, R.K.; Hardie, L.A.

    1985-02-01

    A comparative sedimentology and facies stratigraphy study of the Lower Ordovician carbonate of the central Appalachians (Beekmantown Group and equivalents) has been carried out. Our approach used subfacies (rock record of subenvironments) as the basin units of section measurement. The authors differentiated related sets of subfacies into larger facies units (rock record of environments). Facies were then correlated from section to section using fossils and lithostratigraphy to make a 3-dimensional facies mosaic. Within this mosaic, time lines were constructed using onlap-offlap tongues and cyclic sequences. These time lines cut across facies boundaries. Using this approach, the authors have established that the lower 600 m of the Lower Ordovician carbonate sequence is made up of 4 main facies: (1) cyclic laminite facies composed of a package of shoaling-upward shelf lagoon-peritidal cycles, (2) thin-bedded grainstone facies deposited in a shelf lagoon, (3) Renalcis bioherm facies recording a shelf lagoon patch-reef environment, and (4) Epiphyton bioherm facies recording a shelf-edge reef system. The distribution of these facies along time lines across the strike of the central Appalachians is markedly zoned. Epiphyton bioherm facies dominate the eastern margin while cyclic laminite facies dominate the western margin, with thin-bedded grainstone and Renalcis bioherm facies making up the central belt. This zonation of facies is a typical shallow carbonate shelf system with fringing reefs along the eastern, seaward margin and tidal flats along the western, landward margin. Vertical distribution of these facies across strike records 3 major sea level changes during deposition of the lower 600 m of this extensive Lower Ordovician carbonate shelf.

  5. Applying causal mediation analysis to personality disorder research.

    Walters, Glenn D

    2018-01-01

    This article is designed to address fundamental issues in the application of causal mediation analysis to research on personality disorders. Causal mediation analysis is used to identify mechanisms of effect by testing variables as putative links between the independent and dependent variables. As such, it would appear to have relevance to personality disorder research. It is argued that proper implementation of causal mediation analysis requires that investigators take several factors into account. These factors are discussed under 5 headings: variable selection, model specification, significance evaluation, effect size estimation, and sensitivity testing. First, care must be taken when selecting the independent, dependent, mediator, and control variables for a mediation analysis. Some variables make better mediators than others and all variables should be based on reasonably reliable indicators. Second, the mediation model needs to be properly specified. This requires that the data for the analysis be prospectively or historically ordered and possess proper causal direction. Third, it is imperative that the significance of the identified pathways be established, preferably with a nonparametric bootstrap resampling approach. Fourth, effect size estimates should be computed or competing pathways compared. Finally, investigators employing the mediation method are advised to perform a sensitivity analysis. Additional topics covered in this article include parallel and serial multiple mediation designs, moderation, and the relationship between mediation and moderation. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

  6. Signed directed social network analysis applied to group conflict

    Zheng, Quan; Skillicorn, David; Walther, Olivier

    2015-01-01

    Real-world social networks contain relationships of multiple different types, but this richness is often ignored in graph-theoretic modelling. We show how two recently developed spectral embedding techniques, for directed graphs (relationships are asymmetric) and for signed graphs (relationships...... are both positive and negative), can be combined. This combination is particularly appropriate for intelligence, terrorism, and law enforcement applications. We illustrate by applying the novel embedding technique to datasets describing conflict in North-West Africa, and show how unusual interactions can...

  7. Applied risk analysis to the future Brazilian electricity generation matrix

    Maues, Jair; Fernandez, Eloi; Correa, Antonio

    2010-09-15

    This study compares energy conversion systems for the generation of electrical power, with an emphasis on the Brazilian energy matrix. The financial model applied in this comparison is based on the Portfolio Theory, developed by Harry Markowitz. The risk-return ratio related to the electrical generation mix predicted in the National Energy Plan - 2030, published in 2006 by the Brazilian Energy Research Office, is evaluated. The increase of non-traditional renewable energy in this expected electrical generating mix, specifically, residues of sugar cane plantations and wind energy, reduce not only the risk but also the average cost of the kilowatt-hour generated.

  8. Applied network security monitoring collection, detection, and analysis

    Sanders, Chris

    2013-01-01

    Applied Network Security Monitoring is the essential guide to becoming an NSM analyst from the ground up. This book takes a fundamental approach to NSM, complete with dozens of real-world examples that teach you the key concepts of NSM. Network security monitoring is based on the principle that prevention eventually fails. In the current threat landscape, no matter how much you try, motivated attackers will eventually find their way into your network. At that point, it is your ability to detect and respond to that intrusion that can be the difference between a small incident and a major di

  9. Thermoeconomic analysis applied to an alternative wastewater treatment

    Lamas, Wendell de Queiroz [University of Taubate, Post-graduate Programme in Mechanical Engineering, Department of Mechanical Engineering, Sp (Brazil); Sao Paulo State University, Faculty of Engineering, Campus of Guaratingueta, Postgraduate Programme in Mechanical Engineering, Sp (Brazil); Silveira, Jose Luz; Mattos dos Reis, Luiz Octavio [Sao Paulo State University, Faculty of Engineering, Campus of Guaratingueta, Postgraduate Programme in Mechanical Engineering, Sp (Brazil); Oscare Giacaglia, Giorgio Eugenio [University of Taubate, Post-graduate Programme in Mechanical Engineering, Department of Mechanical Engineering, Sp (Brazil)

    2010-10-15

    This work develops a methodology for the determination of costs associated to products generated in a small wastewater treatment station. The methodology begins with plant units identification, relating their fluid and thermodynamics features to each point indicated in its process diagram. Following, a functional diagram and a formulation are developed in exergetic basis, describing all equations for these points, which are the constraints for optimisation and are used to determine costs associated to products generated in a Small Wastewater Treatment Station - SWTS. The methodology is applied to a hypothetical system based on SWTS plants and presents consistent results when compared to values based on previous experiments and evaluations. (author)

  10. Applying real options analysis to assess cleaner energy development strategies

    Cheng, Ching-Tsung; Lo, Shang-Lien; Lin, Tyrone T.

    2011-01-01

    The energy industry, accounts for the largest portion of CO 2 emissions, is facing the issue of compliance with the national clean energy policy. The methodology for evaluating the energy mix policy is crucial because of the characteristics of lead time embedded with the power generation facilities investment and the uncertainty of future electricity demand. In this paper, a modified binomial model based on sequential compound options, which may account for the lead time and uncertainty as a whole is established, and a numerical example on evaluating the optional strategies and the strategic value of the cleaner energy policy is also presented. It is found that the optimal decision at some nodes in the binomial tree is path dependent, which is different from the standard sequential compound option model with lead time or time lag concept. The proposed modified binomial sequential compound real options model can be generalized and extensively applied to solve the general decision problems that deal with the long lead time of many government policies as well as capital intensive investments. - Highlights: → Introducing a flexible strategic management approach for government policy making. → Developing a modified binomial real options model based on sequential compound options. → Proposing an innovative model for managing the long term policy with lead time. → Applying to evaluate the options of various scenarios of cleaner energy strategies.

  11. Concept of spatial channel theory applied to reactor shielding analysis

    Williams, M.L.; Engle, W.W. Jr.

    1977-01-01

    The concept of channel theory is used to locate spatial regions that are important in contributing to a shielding response. The method is analogous to the channel-theory method developed for ascertaining important energy channels in cross-section analysis. The mathematical basis for the theory is shown to be the generalized reciprocity relation, and sample problems are given to exhibit and verify properties predicted by the mathematical equations. A practical example is cited from the shielding analysis of the Fast Flux Test Facility performed at Oak Ridge National Laboratory, in which a perspective plot of channel-theory results was found useful in locating streaming paths around the reactor cavity shield

  12. Mechanical properties, mineralogical composition, and micro fabric of Opalinus Clay. Sandy and shaly facies (Mont Terri, Switzerland)

    Kaufhold, Annette; Graesle, Werner; Plischke, Ingo

    2015-01-01

    For the safe disposal of high-level radioactive waste, different host rocks are currently considered. The favorable properties of claystone are low permeability, retention capacity for some radionuclides, and the ability to self-seal cracks, e.g. by swelling or time-dependent compaction creep. For the understanding of the long-term behavior of clay host rocks, the interaction between mechanical behavior, micro fabric, and mineral composition has to be understood (Bock et al., 2010). In the international research project Mont Terri (Switzerland) the Opalinus Clay (Jurassic Formation) is investigated in an underground rock laboratory (URL). In the present study the relationship between mechanical, mineralogical and micro fabric properties were studied on representative samples of the sandy and shaly facies of the Opalinus Clay (OPA) from Mont Terri. The mineral composition of all samples was analysed by using a complex mineral phase analysis. Therefore, the results of the X-ray diffraction, X-ray fluoreszence, organic and inorganic carbonate analysis (LECO) were adjusted with each other. In the case of the sandy facies (OPA) the mechanical strength inrcreases with increasing carbonate content. Here small carbonate particles form the matrix and act as stabilisator. The carbonates of the shaly facies (OPA), on the other hand, are mainly fossil fragments (e.g. shells) aligned parallel to bedding. These large carbonate particles are acting as predetermined breaking surfaces. Hence, in the case of shaly facies (OPA) the mechanical strength decreases with increasing carbonate content. Image Analyses (Fiji registered ) of scattering electron microscope images of polished sections proved the determined microstructural differences. Besides, carbonate particles in the sandy facies are mostly isometric, in contrast carbonates of the shaly facies show different shapes. This is explained further in terms of the aspect ratio. The mechanical tests were carried out as triaxial

  13. Mechanical properties, mineralogical composition, and micro fabric of Opalinus Clay. Sandy and shaly facies (Mont Terri, Switzerland)

    Kaufhold, Annette; Graesle, Werner [BGR Hannover (Germany); Plischke, Ingo

    2015-07-01

    For the safe disposal of high-level radioactive waste, different host rocks are currently considered. The favorable properties of claystone are low permeability, retention capacity for some radionuclides, and the ability to self-seal cracks, e.g. by swelling or time-dependent compaction creep. For the understanding of the long-term behavior of clay host rocks, the interaction between mechanical behavior, micro fabric, and mineral composition has to be understood (Bock et al., 2010). In the international research project Mont Terri (Switzerland) the Opalinus Clay (Jurassic Formation) is investigated in an underground rock laboratory (URL). In the present study the relationship between mechanical, mineralogical and micro fabric properties were studied on representative samples of the sandy and shaly facies of the Opalinus Clay (OPA) from Mont Terri. The mineral composition of all samples was analysed by using a complex mineral phase analysis. Therefore, the results of the X-ray diffraction, X-ray fluoreszence, organic and inorganic carbonate analysis (LECO) were adjusted with each other. In the case of the sandy facies (OPA) the mechanical strength inrcreases with increasing carbonate content. Here small carbonate particles form the matrix and act as stabilisator. The carbonates of the shaly facies (OPA), on the other hand, are mainly fossil fragments (e.g. shells) aligned parallel to bedding. These large carbonate particles are acting as predetermined breaking surfaces. Hence, in the case of shaly facies (OPA) the mechanical strength decreases with increasing carbonate content. Image Analyses (Fiji {sup registered}) of scattering electron microscope images of polished sections proved the determined microstructural differences. Besides, carbonate particles in the sandy facies are mostly isometric, in contrast carbonates of the shaly facies show different shapes. This is explained further in terms of the aspect ratio. The mechanical tests were carried out as triaxial

  14. Computational modeling applied to stress gradient analysis for metallic alloys

    Iglesias, Susana M.; Assis, Joaquim T. de; Monine, Vladimir I.

    2009-01-01

    Nowadays composite materials including materials reinforced by particles are the center of the researcher's attention. There are problems with the stress measurements in these materials, connected with the superficial stress gradient caused by the difference of the stress state of particles on the surface and in the matrix of the composite material. Computer simulation of diffraction profile formed by superficial layers of material allows simulate the diffraction experiment and gives the possibility to resolve the problem of stress measurements when the stress state is characterized by strong gradient. The aim of this paper is the application of computer simulation technique, initially developed for homogeneous materials, for diffraction line simulation of composite materials and alloys. Specifically we applied this technique for siluminum fabricated by powder metallurgy. (author)

  15. Performance analysis of numeric solutions applied to biokinetics of radionuclides

    Mingatos, Danielle dos Santos; Bevilacqua, Joyce da Silva

    2013-01-01

    Biokinetics models for radionuclides applied to dosimetry problems are constantly reviewed by ICRP. The radionuclide trajectory could be represented by compartmental models, assuming constant transfer rates between compartments. A better understanding of physiological or biochemical phenomena, improve the comprehension of radionuclide behavior in the human body and, in general, more complex compartmental models are proposed, increasing the difficulty of obtaining the analytical solution for the system of first order differential equations. Even with constant transfer rates numerical solutions must be carefully implemented because of almost singular characteristic of the matrix of coefficients. In this work we compare numerical methods with different strategies for ICRP-78 models for Thorium-228 and Uranium-234. The impact of uncertainty in the parameters of the equations is also estimated for local and global truncation errors. (author)

  16. Condition Monitoring of a Process Filter Applying Wireless Vibration Analysis

    Pekka KOSKELA

    2011-05-01

    Full Text Available This paper presents a novel wireless vibration-based method for monitoring the degree of feed filter clogging. In process industry, these filters are applied to prevent impurities entering the process. During operation, the filters gradually become clogged, decreasing the feed flow and, in the worst case, preventing it. The cleaning of the filter should therefore be carried out predictively in order to avoid equipment damage and unnecessary process downtime. The degree of clogging is estimated by first calculating the time domain indices from low frequency accelerometer samples and then taking the median of the processed values. Nine different statistical quantities are compared based on the estimation accuracy and criteria for operating in resource-constrained environments with particular focus on energy efficiency. The initial results show that the method is able to detect the degree of clogging, and the approach may be applicable to filter clogging monitoring.

  17. Sensitivity Analysis Applied in Design of Low Energy Office Building

    Heiselberg, Per; Brohus, Henrik

    2008-01-01

    satisfies the design requirements and objectives. In the design of sustainable Buildings it is beneficial to identify the most important design parameters in order to develop more efficiently alternative design solutions or reach optimized design solutions. A sensitivity analysis makes it possible...

  18. Applying Skinner's Analysis of Verbal Behavior to Persons with Dementia

    Dixon, Mark; Baker, Jonathan C.; Sadowski, Katherine Ann

    2011-01-01

    Skinner's 1957 analysis of verbal behavior has demonstrated a fair amount of utility to teach language to children with autism and other various disorders. However, the learning of language can be forgotten, as is the case for many elderly suffering from dementia or other degenerative diseases. It appears possible that Skinner's operants may…

  19. Applying an Activity System to Online Collaborative Group Work Analysis

    Choi, Hyungshin; Kang, Myunghee

    2010-01-01

    This study determines whether an activity system provides a systematic framework to analyse collaborative group work. Using an activity system as a unit of analysis, the research examined learner behaviours, conflicting factors and facilitating factors while students engaged in collaborative work via asynchronous computer-mediated communication.…

  20. Visual Analytics Applied to Image Analysis : From Segmentation to Classification

    Rauber, Paulo

    2017-01-01

    Image analysis is the field of study concerned with extracting information from images. This field is immensely important for commercial and scientific applications, from identifying people in photographs to recognizing diseases in medical images. The goal behind the work presented in this thesis is

  1. Applying AI tools to operational space environmental analysis

    Krajnak, Mike; Jesse, Lisa; Mucks, John

    1995-01-01

    The U.S. Air Force and National Oceanic Atmospheric Agency (NOAA) space environmental operations centers are facing increasingly complex challenges meeting the needs of their growing user community. These centers provide current space environmental information and short term forecasts of geomagnetic activity. Recent advances in modeling and data access have provided sophisticated tools for making accurate and timely forecasts, but have introduced new problems associated with handling and analyzing large quantities of complex data. AI (Artificial Intelligence) techniques have been considered as potential solutions to some of these problems. Fielding AI systems has proven more difficult than expected, in part because of operational constraints. Using systems which have been demonstrated successfully in the operational environment will provide a basis for a useful data fusion and analysis capability. Our approach uses a general purpose AI system already in operational use within the military intelligence community, called the Temporal Analysis System (TAS). TAS is an operational suite of tools supporting data processing, data visualization, historical analysis, situation assessment and predictive analysis. TAS includes expert system tools to analyze incoming events for indications of particular situations and predicts future activity. The expert system operates on a knowledge base of temporal patterns encoded using a knowledge representation called Temporal Transition Models (TTM's) and an event database maintained by the other TAS tools. The system also includes a robust knowledge acquisition and maintenance tool for creating TTM's using a graphical specification language. The ability to manipulate TTM's in a graphical format gives non-computer specialists an intuitive way of accessing and editing the knowledge base. To support space environmental analyses, we used TAS's ability to define domain specific event analysis abstractions. The prototype system defines

  2. CARVEDILOL POPULATION PHARMACOKINETIC ANALYSISAPPLIED VALIDATION PROCEDURE

    Aleksandra Catić-Đorđević

    2013-09-01

    Full Text Available Carvedilol is a nonselective beta blocker/alpha-1 blocker, which is used for treatment of essential hypertension, chronic stable angina, unstable angina and ischemic left ventricular dysfunction. The aim of this study was to describe carvedilol population pharmacokinetic (PK analysis as well as the validation of analytical procedure, which is an important step regarding this approach. In contemporary clinical practice, population PK analysis is often more important than standard PK approach in setting a mathematical model that describes the PK parameters. Also, it includes the variables that have particular importance in the drugs pharmacokinetics such as sex, body mass, dosage, pharmaceutical form, pathophysiological state, disease associated with the organism or the presence of a specific polymorphism in the isoenzyme important for biotransformation of the drug. One of the most frequently used approach in population PK analysis is the Nonlinear Modeling of Mixed Effects - NONMEM modeling. Analytical methods used in the data collection period is of great importance for the implementation of a population PK analysis of carvedilol in order to obtain reliable data that can be useful in clinical practice. High performance liquid chromatography (HPLC analysis of carvedilol is used to confirm the identity of a drug and provide quantitative results and also to monitor the efficacy of the therapy. Analytical procedures used in other studies could not be fully implemented in our research as it was necessary to perform certain modification and validation of the method with the aim of using the obtained results for the purpose of a population pharmacokinetic analysis. Validation process is a logical terminal phase of analytical procedure development that provides applicability of the procedure itself. The goal of validation is to ensure consistency of the method and accuracy of results or to confirm the selection of analytical method for a given sample

  3. Characterizing Geological Facies using Seismic Waveform Classification in Sarawak Basin

    Zahraa, Afiqah; Zailani, Ahmad; Prasad Ghosh, Deva

    2017-10-01

    Numerous effort have been made to build relationship between geology and geophysics using different techniques throughout the years. The integration of these two most important data in oil and gas industry can be used to reduce uncertainty in exploration and production especially for reservoir productivity enhancement and stratigraphic identification. This paper is focusing on seismic waveform classification to different classes using neural network and to link them according to the geological facies which are established using the knowledge on lithology and log motif of well data. Seismic inversion is used as the input for the neural network to act as the direct lithology indicator reducing dependency on well calibration. The interpretation of seismic facies classification map provides a better understanding towards the lithology distribution, depositional environment and help to identify significant reservoir rock

  4. Petrology of blueschist facies metamorphic rocks of the Meliata Unit

    Faryad Shah Wali

    1997-06-01

    Full Text Available Meliata blueschists originated from basalts, limestones, pelites, psammitic and amphibolite facies basement rocks. Compositionally, the metabasalts have a geochemical signature mostly indicative of a transitional arc-MORB origin, but some mafic rocks having affinity with within plate basalts also present. The mafic blueschists consist of blue amphibole, epidote and albite, rarely also garnet, Na-pyroxene and chloritoid. Apart from phengite and quartz the metapelites and metapsammites contain one or more of the minerals: chloritoid, paragonite, glaucophane, albite, chlorite, occasionally also Na-pyroxene and garnet. Amphibolite facies rocks contain relic garnet, plagioclase and hornblende, the latter two replaced by albite and blue amphibole, respectively. The zoning patterns of blue amphibole, garnet and chloritoid suggest their formation during prograde stage of metamorphism. P-T conditions of meta-morphism are estimated to be about 350-460 oC and 10-12 kbar.

  5. Diffusing wave spectroscopy applied to material analysis and process control

    Lloyd, Christopher James

    1997-01-01

    Diffusing Wave Spectroscopy (DWS) was studied as a method of laboratory analysis of sub-micron particles, and developed as a prospective in-line, industrial, process control sensor, capable of near real-time feedback. No sample pre-treatment was required and measurement was via a non-invasive, flexible, dip in probe. DWS relies on the concept of the diffusive migration of light, as opposed to the ballistic scatter model used in conventional dynamic light scattering. The specific requirements of the optoelectronic hardware, data analysis methods and light scattering model were studied experimentally and, where practical, theoretically resulting in a novel technique of analysis of particle suspensions and emulsions of volume fractions between 0.01 and 0.4. Operation at high concentrations made the technique oblivious to dust and contamination. A pure homodyne (autodyne) experimental arrangement described was resilient to environmental disturbances, unlike many other systems which utilise optical fibres or heterodyne operation. Pilot and subsequent prototype development led to a highly accurate method of size ranking, suitable for analysis of a wide range of suspensions and emulsions. The technique was shown to operate on real industrial samples with statistical variance as low as 0.3% with minimal software processing. Whilst the application studied was the analysis of TiO 2 suspensions, a diverse range of materials including polystyrene beads, cell pastes and industrial cutting fluid emulsions were tested. Results suggest that, whilst all sizing should be comparative to suitable standards, concentration effects may be minimised and even completely modelled-out in many applications. Adhesion to the optical probe was initially a significant problem but was minimised after the evaluation and use of suitable non stick coating materials. Unexpected behaviour in the correlation in the region of short decay times led to consideration of the effects of rotational diffusion

  6. Thermodynamic analysis applied to a food-processing plant

    Ho, J C; Chandratilleke, T T

    1987-01-01

    Two production lines of a multi-product, food-processing plant are selected for energy auditing and analysis. Thermodynamic analysis showed that the first-law and second-law efficiencies are 81.5% and 26.1% for the instant-noodles line and 23.6% and 7.9% for the malt-beverage line. These efficiency values are dictated primarily by the major energy-consuming sub-processes of each production line. Improvements in both first-law and second-law efficiencies are possible for the plants if the use of steam for heating is replaced by gaseous or liquid fuels, the steam ejectors for creating vacuum are replaced by a mechanical pump, and employing the cooler surroundings to assist in the cooling process.

  7. Current Human Reliability Analysis Methods Applied to Computerized Procedures

    Ronald L. Boring

    2012-06-01

    Computerized procedures (CPs) are an emerging technology within nuclear power plant control rooms. While CPs have been implemented internationally in advanced control rooms, to date no US nuclear power plant has implemented CPs in its main control room (Fink et al., 2009). Yet, CPs are a reality of new plant builds and are an area of considerable interest to existing plants, which see advantages in terms of enhanced ease of use and easier records management by omitting the need for updating hardcopy procedures. The overall intent of this paper is to provide a characterization of human reliability analysis (HRA) issues for computerized procedures. It is beyond the scope of this document to propose a new HRA approach or to recommend specific methods or refinements to those methods. Rather, this paper serves as a review of current HRA as it may be used for the analysis and review of computerized procedures.

  8. Environmental analysis applied to schools. Methodologies for data acquisition

    Andriola, L.; Ceccacci, R.

    2001-01-01

    The environment analysis is the basis of environmental management for organizations and it is considered as the first step in EMAS. It allows to identify, deal with the issues and have a clear knowledge on environmental performances of organizations. Schools can be included in the organizations. Nevertheless, the complexity of environmental issues and applicable regulations makes very difficult for a school, that wants to implement an environmental management system (EMAS, ISO 14001, etc.), to face this first step. So, it has been defined an instrument, that is easy but complete and coherent with reference standard, to let schools choose their process for elaborating the initial environmental revue. This instrument consists, essentially, in cards that, if completed, facilitate the drafting of the environmental analysis report [it

  9. Ion beam analysis techniques applied to large scale pollution studies

    Cohen, D D; Bailey, G; Martin, J; Garton, D; Noorman, H; Stelcer, E; Johnson, P [Australian Nuclear Science and Technology Organisation, Lucas Heights, NSW (Australia)

    1994-12-31

    Ion Beam Analysis (IBA) techniques are ideally suited to analyse the thousands of filter papers a year that may originate from a large scale aerosol sampling network. They are fast multi-elemental and, for the most part, non-destructive so other analytical methods such as neutron activation and ion chromatography can be performed afterwards. ANSTO in collaboration with the NSW EPA, Pacific Power and the Universities of NSW and Macquarie has established a large area fine aerosol sampling network covering nearly 80,000 square kilometres of NSW with 25 fine particle samplers. This network known as ASP was funded by the Energy Research and Development Corporation (ERDC) and commenced sampling on 1 July 1991. The cyclone sampler at each site has a 2.5 {mu}m particle diameter cut off and runs for 24 hours every Sunday and Wednesday using one Gillman 25mm diameter stretched Teflon filter for each day. These filters are ideal targets for ion beam analysis work. Currently ANSTO receives 300 filters per month from this network for analysis using its accelerator based ion beam techniques on the 3 MV Van de Graaff accelerator. One week a month of accelerator time is dedicated to this analysis. Four simultaneous accelerator based IBA techniques are used at ANSTO, to analyse for the following 24 elements: H, C, N, O, F, Na, Al, Si, P, S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Cu, Ni, Co, Zn, Br and Pb. The IBA techniques were proved invaluable in identifying sources of fine particles and their spatial and seasonal variations accross the large area sampled by the ASP network. 3 figs.

  10. Ion beam analysis techniques applied to large scale pollution studies

    Cohen, D.D.; Bailey, G.; Martin, J.; Garton, D.; Noorman, H.; Stelcer, E.; Johnson, P. [Australian Nuclear Science and Technology Organisation, Lucas Heights, NSW (Australia)

    1993-12-31

    Ion Beam Analysis (IBA) techniques are ideally suited to analyse the thousands of filter papers a year that may originate from a large scale aerosol sampling network. They are fast multi-elemental and, for the most part, non-destructive so other analytical methods such as neutron activation and ion chromatography can be performed afterwards. ANSTO in collaboration with the NSW EPA, Pacific Power and the Universities of NSW and Macquarie has established a large area fine aerosol sampling network covering nearly 80,000 square kilometres of NSW with 25 fine particle samplers. This network known as ASP was funded by the Energy Research and Development Corporation (ERDC) and commenced sampling on 1 July 1991. The cyclone sampler at each site has a 2.5 {mu}m particle diameter cut off and runs for 24 hours every Sunday and Wednesday using one Gillman 25mm diameter stretched Teflon filter for each day. These filters are ideal targets for ion beam analysis work. Currently ANSTO receives 300 filters per month from this network for analysis using its accelerator based ion beam techniques on the 3 MV Van de Graaff accelerator. One week a month of accelerator time is dedicated to this analysis. Four simultaneous accelerator based IBA techniques are used at ANSTO, to analyse for the following 24 elements: H, C, N, O, F, Na, Al, Si, P, S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Cu, Ni, Co, Zn, Br and Pb. The IBA techniques were proved invaluable in identifying sources of fine particles and their spatial and seasonal variations accross the large area sampled by the ASP network. 3 figs.

  11. Pair distribution function analysis applied to decahedral gold nanoparticles

    Nakotte, H; Silkwood, C; Kiefer, B; Karpov, D; Fohtung, E; Page, K; Wang, H-W; Olds, D; Manna, S; Fullerton, E E

    2017-01-01

    The five-fold symmetry of face-centered cubic (fcc) derived nanoparticles is inconsistent with the translational symmetry of a Bravais lattice and generally explained by multiple twinning of a tetrahedral subunit about a (joint) symmetry axis, with or without structural modification to the fcc motif. Unlike in bulk materials, five-fold twinning in cubic nanoparticles is common and strongly affects their structural, chemical, and electronic properties. To test and verify theoretical approaches, it is therefore pertinent that the local structural features of such materials can be fully characterized. The small size of nanoparticles severely limits the application of traditional analysis techniques, such as Bragg diffraction. A complete description of the atomic arrangement in nanoparticles therefore requires a departure from the concept of translational symmetry, and prevents fully evaluating all the structural features experimentally. We describe how recent advances in instrumentation, together with the increasing power of computing, are shaping the development of alternative analysis methods of scattering data for nanostructures. We present the application of Debye scattering and pair distribution function (PDF) analysis towards modeling of the total scattering data for the example of decahedral gold nanoparticles. PDF measurements provide a statistical description of the pair correlations of atoms within a material, allowing one to evaluate the probability of finding two atoms within a given distance. We explored the sensitivity of existing synchrotron x-ray PDF instruments for distinguishing four different simple models for our gold nanoparticles: a multiply twinned fcc decahedron with either a single gap or multiple distributed gaps, a relaxed body-centered orthorhombic (bco) decahedron, and a hybrid decahedron. The data simulations of the models were then compared with experimental data from synchrotron x-ray total scattering. We present our experimentally

  12. The colour analysis method applied to homogeneous rocks

    Halász Amadé

    2015-12-01

    Full Text Available Computer-aided colour analysis can facilitate cyclostratigraphic studies. Here we report on a case study involving the development of a digital colour analysis method for examination of the Boda Claystone Formation which is the most suitable in Hungary for the disposal of high-level radioactive waste. Rock type colours are reddish brown or brownish red, or any shade between brown and red. The method presented here could be used to differentiate similar colours and to identify gradual transitions between these; the latter are of great importance in a cyclostratigraphic analysis of the succession. Geophysical well-logging has demonstrated the existence of characteristic cyclic units, as detected by colour and natural gamma. Based on our research, colour, natural gamma and lithology correlate well. For core Ib-4, these features reveal the presence of orderly cycles with thicknesses of roughly 0.64 to 13 metres. Once the core has been scanned, this is a time- and cost-effective method.

  13. Comparison of four approaches to a rock facies classification problem

    Dubois, M.K.; Bohling, Geoffrey C.; Chakrabarti, S.

    2007-01-01

    In this study, seven classifiers based on four different approaches were tested in a rock facies classification problem: classical parametric methods using Bayes' rule, and non-parametric methods using fuzzy logic, k-nearest neighbor, and feed forward-back propagating artificial neural network. Determining the most effective classifier for geologic facies prediction in wells without cores in the Panoma gas field, in Southwest Kansas, was the objective. Study data include 3600 samples with known rock facies class (from core) with each sample having either four or five measured properties (wire-line log curves), and two derived geologic properties (geologic constraining variables). The sample set was divided into two subsets, one for training and one for testing the ability of the trained classifier to correctly assign classes. Artificial neural networks clearly outperformed all other classifiers and are effective tools for this particular classification problem. Classical parametric models were inadequate due to the nature of the predictor variables (high dimensional and not linearly correlated), and feature space of the classes (overlapping). The other non-parametric methods tested, k-nearest neighbor and fuzzy logic, would need considerable improvement to match the neural network effectiveness, but further work, possibly combining certain aspects of the three non-parametric methods, may be justified. ?? 2006 Elsevier Ltd. All rights reserved.

  14. STOCHASTIC FRACTURED ROCK FACIES FOR GROUNDWATER FLOW MODELING

    DANIELA BLESSENT

    2013-01-01

    Full Text Available Este artículo presenta los resultados de una simulación de flujo de agua subterránea en rocas fracturadas. Se emplea un enfoque estocástico (modelo estocástico equivalente en medio poroso fracturado para construir el modelo conceptual y para usar este último en la roca de baja permeabilidad encontrada en el sitio elegido como caso de estudio (Olkiluoto, Finlandia. La roca que se investiga se encuentra localizada alrededor de un grupo de pozos de sondeo y cubre un área de algunas hectáreas. Las mediciones de campo de pruebas de interferencia hidráulica se utilizan para calibrar el modelo de flujo de agua subterránea. Múltiples combinaciones de facies estocásticos se consideran para evaluar el impacto de la distribución y del número de facies en las cargas hidráulicas y en los caudales. Este estudio cuantifica la variabilidad de los resultados numéricos, lo cual es importante para el análisis de la incertidumbre en los sistemas hidrogeológicos. Por otra parte, este estudio muestra que el modelo conceptual de facies estocásticos es una alternativa adecuada a los modelos conceptuales de redes de fracturas discretas.

  15. Applying reliability centered maintenance analysis principles to inservice testing

    Flude, J.W.

    1994-01-01

    Federal regulations require nuclear power plants to use inservice test (IST) programs to ensure the operability of safety-related equipment. IST programs are based on American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code requirements. Many of these plants also use Reliability Centered Maintenance (RCM) to optimize system maintenance. ASME Code requirements are hard to change. The process for requesting authority to use an alternate strategy is long and expensive. The difficulties of obtaining this authority make the use of RCM method on safety-related systems not cost effective. An ASME research task force on Risk Based Inservice Testing is investigating changing the Code. The change will allow plants to apply RCM methods to the problem of maintenance strategy selection for safety-related systems. The research task force is working closely with the Codes and Standards sections to develop a process related to the RCM process. Some day plants will be able to use this process to develop more efficient and safer maintenance strategies

  16. A Multifactorial Analysis of Reconstruction Methods Applied After Total Gastrectomy

    Oktay Büyükaşık

    2010-12-01

    Full Text Available Aim: The aim of this study was to evaluate the reconstruction methods applied after total gastrectomy in terms of postoperative symptomology and nutrition. Methods: This retrospective study was conducted on 31 patients who underwent total gastrectomy due to gastric cancer in 2. Clinic of General Surgery, SSK Ankara Training Hospital. 6 different reconstruction methods were used and analyzed in terms of age, sex and postoperative complications. One from esophagus and two biopsy specimens from jejunum were taken through upper gastrointestinal endoscopy from all cases, and late period morphological and microbiological changes were examined. Postoperative weight change, dumping symptoms, reflux esophagitis, solid/liquid dysphagia, early satiety, postprandial pain, diarrhea and anorexia were assessed. Results: Of 31 patients,18 were males and 13 females; the youngest one was 33 years old, while the oldest- 69 years old. It was found that reconstruction without pouch was performed in 22 cases and with pouch in 9 cases. Early satiety, postprandial pain, dumping symptoms, diarrhea and anemia were found most commonly in cases with reconstruction without pouch. The rate of bacterial colonization of the jejunal mucosa was identical in both groups. Reflux esophagitis was most commonly seen in omega esophagojejunostomy (EJ, while the least-in Roux-en-Y, Tooley and Tanner 19 EJ. Conclusion: Reconstruction with pouch performed after total gastrectomy is still a preferable method. (The Medical Bulletin of Haseki 2010; 48:126-31

  17. Structural analysis of fuel rod applied to pressurized water reactors

    Faria, Danilo P.; Pinheiro, Andre Ricardo M.; Lotto, André A., E-mail: danilo.pinheiro@marinha.mil.br [Centro Tecnológico da Marinha em São Paulo (CTMSP), São Paulo, SP (Brazil)

    2017-07-01

    The design of fuel assemblies applied to Pressurized Water Reactors (PWR) has several requirements and acceptance criteria that must be attended for licensing. In the case of PWR fuel rods, an important mechanical structural requirement is to keep the radial stability when submitted to the coolant external pressure. In the framework of the Accident Tolerant Fuel (ATF) program new materials have been studied to replace zirconium based alloys as cladding, including iron-based alloys. In this sense, efforts have been made to evaluate the behavior of these materials under PWR conditions. The present work aims to evaluate the collapse cold pressure of a stainless steel thin-walled tube similar to that used as cladding material of fuel rods by means of the comparison of numeric data, and experimental results. As a result of the simulations, it was observed that the collapse pressure has a value intermediate value between those found by regulatory requirements and analytical calculations. The experiment was carried out for the validation of the computational model using test specimens of thin-walled tubes considering empty tube. The test specimens were sealed at both ends by means of welding. They were subjected to a high pressure device until the collapse of the tubes. Preliminary results obtained from experiments with the empty test specimens indicate that the computational model can be validated for stainless steel cladding, considering the difference between collapse pressure indicated in the regulatory document and the actual limit pressure concerning to radial instability of tubes with the studied characteristics. (author)

  18. Framework for applying probabilistic safety analysis in nuclear regulation

    Dimitrijevic, V.B.

    1997-01-01

    The traditional regulatory framework has served well to assure the protection of public health and safety. It has been recognized, however, that in a few circumstances, this deterministic framework has lead to an extensive expenditure on matters hat have little to do with the safe and reliable operation of the plant. Developments of plant-specific PSA have offered a new and powerful analytical tool in the evaluation of the safety of the plant. Using PSA insights as an aid to decision making in the regulatory process is now known as 'risk-based' or 'risk-informed' regulation. Numerous activities in the U.S. nuclear industry are focusing on applying this new approach to modify regulatory requirements. In addition, other approaches to regulations are in the developmental phase and are being evaluated. One is based on the performance monitoring and results and it is known as performance-based regulation. The other, called the blended approach, combines traditional deterministic principles with PSA insights and performance results. (author)

  19. Statistical analysis applied to safety culture self-assessment

    Macedo Soares, P.P.

    2002-01-01

    Interviews and opinion surveys are instruments used to assess the safety culture in an organization as part of the Safety Culture Enhancement Programme. Specific statistical tools are used to analyse the survey results. This paper presents an example of an opinion survey with the corresponding application of the statistical analysis and the conclusions obtained. Survey validation, Frequency statistics, Kolmogorov-Smirnov non-parametric test, Student (T-test) and ANOVA means comparison tests and LSD post-hoc multiple comparison test, are discussed. (author)

  20. Prompt gamma cold neutron activation analysis applied to biological materials

    Rossbach, M.; Hiep, N.T.

    1992-01-01

    Cold neutrons at the external neutron guide laboratory (ELLA) of the KFA Juelich are used to demonstrate their profitable application for multielement characterization of biological materials. The set-up and experimental conditions of the Prompt Gamma Cold Neutron Activation Analysis (PGCNAA) device is described in detail. Results for C, H, N, S, K, B, and Cd using synthetic standards and the 'ratio' technique for calculation are reported for several reference materials and prove the method to be reliable and complementary with respect to the elements being determined by INAA. (orig.)

  1. Methods of economic analysis applied to fusion research. Final report

    1983-01-01

    In this and previous efforts ECON has provided economic assessment of a fusion research program. This phase of study focused on two tasks, the first concerned with the economics of fusion in an economy that relies heavily upon synthetic fuels, and the second concerned with the overall economic effects of pursuing soft energy technologies instead of hard technologies. This report is organized in two parts, the first entitled An Economic Analysis of Coproduction of Fusion-Electric Energy and Other Products, and the second entitled Arguments Associated with the Choice of Potential Energy Futures

  2. Artificial Neural Network methods applied to sentiment analysis

    Ebert, Sebastian

    2017-01-01

    Sentiment Analysis (SA) is the study of opinions and emotions that are conveyed by text. This field of study has commercial applications for example in market research (e.g., “What do customers like and dislike about a product?”) and consumer behavior (e.g., “Which book will a customer buy next when he wrote a positive review about book X?”). A private person can benefit from SA by automatic movie or restaurant recommendations, or from applications on the computer or smart phone that adapt to...

  3. SPI Trend Analysis of New Zealand Applying the ITA Technique

    Tommaso Caloiero

    2018-03-01

    Full Text Available A natural temporary imbalance of water availability, consisting of persistent lower-than-average or higher-than-average precipitation, can cause extreme dry and wet conditions that adversely impact agricultural yields, water resources, infrastructure, and human systems. In this study, dry and wet periods in New Zealand were expressed using the Standardized Precipitation Index (SPI. First, both the short term (3 and 6 months and the long term (12 and 24 months SPI were estimated, and then, possible trends in the SPI values were detected by means of a new graphical technique, the Innovative Trend Analysis (ITA, which allows the trend identification of the low, medium, and high values of a series. Results show that, in every area currently subject to drought, an increase in this phenomenon can be expected. Specifically, the results of this paper highlight that agricultural regions on the eastern side of the South Island, as well as the north-eastern regions of the North Island, are the most consistently vulnerable areas. In fact, in these regions, the trend analysis mainly showed a general reduction in all the values of the SPI: that is, a tendency toward heavier droughts and weaker wet periods.

  4. Dynamical Systems Analysis Applied to Working Memory Data

    Fidan eGasimova

    2014-07-01

    Full Text Available In the present paper we investigate weekly fluctuations in the working memory capacity (WMC assessed over a period of two years. We use dynamical system analysis, specifically a second order linear differential equation, to model weekly variability in WMC in a sample of 112 9th graders. In our longitudinal data we use a B-spline imputation method to deal with missing data. The results show a significant negative frequency parameter in the data, indicating a cyclical pattern in weekly memory updating performance across time. We use a multilevel modeling approach to capture individual differences in model parameters and find that a higher initial performance level and a slower improvement at the MU task is associated with a slower frequency of oscillation. Additionally, we conduct a simulation study examining the analysis procedure’s performance using different numbers of B-spline knots and values of time delay embedding dimensions. Results show that the number of knots in the B-spline imputation influence accuracy more than the number of embedding dimensions.

  5. Confirmatory factor analysis applied to the Force Concept Inventory

    Eaton, Philip; Willoughby, Shannon D.

    2018-06-01

    In 1995, Huffman and Heller used exploratory factor analysis to draw into question the factors of the Force Concept Inventory (FCI). Since then several papers have been published examining the factors of the FCI on larger sets of student responses and understandable factors were extracted as a result. However, none of these proposed factor models have been verified to not be unique to their original sample through the use of independent sets of data. This paper seeks to confirm the factor models proposed by Scott et al. in 2012, and Hestenes et al. in 1992, as well as another expert model proposed within this study through the use of confirmatory factor analysis (CFA) and a sample of 20 822 postinstruction student responses to the FCI. Upon application of CFA using the full sample, all three models were found to fit the data with acceptable global fit statistics. However, when CFA was performed using these models on smaller sample sizes the models proposed by Scott et al. and Eaton and Willoughby were found to be far more stable than the model proposed by Hestenes et al. The goodness of fit of these models to the data suggests that the FCI can be scored on factors that are not unique to a single class. These scores could then be used to comment on how instruction methods effect the performance of students along a single factor and more in-depth analyses of curriculum changes may be possible as a result.

  6. Multivariate calibration applied to the quantitative analysis of infrared spectra

    Haaland, D.M.

    1991-01-01

    Multivariate calibration methods are very useful for improving the precision, accuracy, and reliability of quantitative spectral analyses. Spectroscopists can more effectively use these sophisticated statistical tools if they have a qualitative understanding of the techniques involved. A qualitative picture of the factor analysis multivariate calibration methods of partial least squares (PLS) and principal component regression (PCR) is presented using infrared calibrations based upon spectra of phosphosilicate glass thin films on silicon wafers. Comparisons of the relative prediction abilities of four different multivariate calibration methods are given based on Monte Carlo simulations of spectral calibration and prediction data. The success of multivariate spectral calibrations is demonstrated for several quantitative infrared studies. The infrared absorption and emission spectra of thin-film dielectrics used in the manufacture of microelectronic devices demonstrate rapid, nondestructive at-line and in-situ analyses using PLS calibrations. Finally, the application of multivariate spectral calibrations to reagentless analysis of blood is presented. We have found that the determination of glucose in whole blood taken from diabetics can be precisely monitored from the PLS calibration of either mind- or near-infrared spectra of the blood. Progress toward the non-invasive determination of glucose levels in diabetics is an ultimate goal of this research. 13 refs., 4 figs.

  7. Principles of Micellar Electrokinetic Capillary Chromatography Applied in Pharmaceutical Analysis

    Árpád Gyéresi

    2013-02-01

    Full Text Available Since its introduction capillary electrophoresis has shown great potential in areas where electrophoretic techniques have rarely been used before, including here the analysis of pharmaceutical substances. The large majority of pharmaceutical substances are neutral from electrophoretic point of view, consequently separations by the classic capillary zone electrophoresis; where separation is based on the differences between the own electrophoretic mobilities of the analytes; are hard to achieve. Micellar electrokinetic capillary chromatography, a hybrid method that combines chromatographic and electrophoretic separation principles, extends the applicability of capillary electrophoretic methods to neutral analytes. In micellar electrokinetic capillary chromatography, surfactants are added to the buffer solution in concentration above their critical micellar concentrations, consequently micelles are formed; micelles that undergo electrophoretic migration like any other charged particle. The separation is based on the differential partitioning of an analyte between the two-phase system: the mobile aqueous phase and micellar pseudostationary phase. The present paper aims to summarize the basic aspects regarding separation principles and practical applications of micellar electrokinetic capillary chromatography, with particular attention to those relevant in pharmaceutical analysis.

  8. Relative role of transfer zones in controlling sequence stacking patterns and facies distribution: insights from the Fushan Depression, South China Sea

    Liu, Entao; Wang, Hua; Li, Yuan; Huang, Chuanyan

    2015-04-01

    In sedimentary basins, a transfer zone can be defined as a coordinated system of deformational features which has good prospects for hydrocarbon exploration. Although the term 'transfer zone' has been widely applied to the study of extensional basins, little attention has been paid to its controlling effect on sequence tracking pattern and depositional facies distribution. Fushan Depression is a half-graben rift sub-basin, located in the southeast of the Beibuwan Basin, South China Sea. In this study, comparative analysis of seismic reflection, palaeogeomorphology, fault activity and depositional facies distribution in the southern slope indicates that three different types of sequence stacking patterns (i.e. multi-level step-fault belt in the western area, flexure slope belt in the central area, gentle slope belt in the eastern area) were developed along the southern slope, together with a large-scale transfer zone in the central area, at the intersection of the western and eastern fault systems. Further analysis shows that the transfer zone played an important role in the diversity of sequence stacking patterns in the southern slope by dividing the Fushan Depression into two non-interfering tectonic systems forming different sequence patterns, and leading to the formation of the flexure slope belt in the central area. The transfer zone had an important controlling effect on not only the diversity of sequence tracking patterns, but also the facies distribution on the relay ramp. During the high-stand stage, under the controlling effect of the transfer zone, the sediments contain a significant proportion of coarser material accumulated and distributed along the ramp axis. By contrast, during the low-stand stage, the transfer zone did not seem to contribute significantly to the low-stand fan distribution which was mainly controlled by the slope gradient (palaeogeomorphology). Therefore, analysis of the transfer zone can provide a new perspective for basin analysis

  9. The sedimentary facies characteristics and lithofacies palaeogeography during Middle-Late Cambrian, Sichuan Basin and adjacent area

    Feifan Lu

    2017-06-01

    Full Text Available Combined with the regional strata filling characteristics of Middle-Upper Cambrian, the present paper conducts a systematic research on sedimentary facies in the basin and its peripheral area by utilizing 164 field outcrops and drilling and coring data. Further, the method of “multi-factor comprehensive synthesis based on single-factor analysis” was employed to investigate the sedimentary facies and palaeogeography of the study area and establish the sedimentary facies model. Stratigraphic reveals that the study area represents the pattern of thin-northwest and thick-southeast by stretching northeast-southwest. Within the present basin, the pattern of “one thin and two thick” predominates, while outside the basin “four thin and three thick” filling feature was found. Sedimentary facies shows that the study area was featured by rimmed carbonate platform. Specifically, carbonate platform, slope and northeastern corner Qinling paleooceanic Basin and southeastern corner Jiangnan Bain was identified from the west to the east. The carbonate platform contains restricted platform, evaporation-restricted platform, semi-restricted platform and the platform margin. Single factor analysis and lithofacies palaeogeographic characteristics manifests that during Middle-Late Cambrian, the western Old land evolved into peneplain stage, and that the eastern and southwestern sub-sags remained connected to the open-sea to some extent. At the time, the shllow seawater circulation was relatively restricted, while the ancient seabed tended to be flat and evaporation characteristics significantly diminished. Secondary sea-level fluctuation intensively influenced the development of scaled grain beach. It is suggested that tide marginal beach, intraplatform shoal subfacies zone, along with Shiqian-SangZhi in southeast and Zhenba-Xinshan in northeast platform-margin beach subfacies zone to be preferable targets for the favorable reservoir facies zone and

  10. Fluid heterogeneity during granulite facies metamorphism in the Adirondacks: stable isotope evidence

    Valley, J.W.; O'Neil, J.R.

    1984-01-01

    The preservation of premetamorphic, whole-rock oxygen isotope ratios in Adirondack metasediments shows that neither these rocks nor adjacent anorthosites and gneisses have been penetrated by large amounts of externally derived, hot CO2-H2O fluids during granulite facies metamorphism. This conclusion is supported by calculations of the effect of fluid volatilization and exchange and is also independently supported by petrologic and phase equilibria considerations. The data suggest that these rocks were not an open system during metamorphism; that fluid/rock ratios were in many instances between 0.0 and 0.1; that externally derived fluids, as well as fluids derived by metamorphic volatilization, rose along localized channels and were not pervasive; and thus that no single generalization can be applied to metamorphic fluid conditions in the Adirondacks. Analyses of 3 to 4 coexisting minerals from Adirondack marbles show that isotopic equilibrium was attained at the peak of granulite and upper amphibolite facies metamorphism. Thus the isotopic compositions of metamorphic fluids can be inferred from analyses of carbonates and fluid budgets can be constructed. Carbonates from the granulite facies are on average, isotopically similar to those from lower grade or unmetamorphosed limestones of the same age showing that no large isotopic shifts accompanied high grade metamorphism. Equilibrium calculations indicate that small decreases in ??18O, averaging 1 permil, result from volatilization reactions for Adirondack rock compositions. Additional small differences between amphibolite and granulite facies marbles are due to systematic lithologie differences. The range of Adirondack carbonate ??18O values (12.3 to 27.2) can be explained by the highly variable isotopic compositions of unmetamorphosed limestones in conjunction with minor 18O and 13C depletions caused by metamorphic volatilization suggesting that many (and possibly most) marbles have closely preserved their

  11. Two-dimensional DFA scaling analysis applied to encrypted images

    Vargas-Olmos, C.; Murguía, J. S.; Ramírez-Torres, M. T.; Mejía Carlos, M.; Rosu, H. C.; González-Aguilar, H.

    2015-01-01

    The technique of detrended fluctuation analysis (DFA) has been widely used to unveil scaling properties of many different signals. In this paper, we determine scaling properties in the encrypted images by means of a two-dimensional DFA approach. To carry out the image encryption, we use an enhanced cryptosystem based on a rule-90 cellular automaton and we compare the results obtained with its unmodified version and the encryption system AES. The numerical results show that the encrypted images present a persistent behavior which is close to that of the 1/f-noise. These results point to the possibility that the DFA scaling exponent can be used to measure the quality of the encrypted image content.

  12. Applying Multi-Criteria Analysis Methods for Fire Risk Assessment

    Pushkina Julia

    2015-11-01

    Full Text Available The aim of this paper is to prove the application of multi-criteria analysis methods for optimisation of fire risk identification and assessment process. The object of this research is fire risk and risk assessment. The subject of the research is studying the application of analytic hierarchy process for modelling and influence assessment of various fire risk factors. Results of research conducted by the authors can be used by insurance companies to perform the detailed assessment of fire risks on the object and to calculate a risk extra charge to an insurance premium; by the state supervisory institutions to determine the compliance of a condition of object with requirements of regulations; by real state owners and investors to carry out actions for decrease in degree of fire risks and minimisation of possible losses.

  13. Neutron activation analysis applied to nutritional and foodstuff studies

    Maihara, Vera A.; Santos, Paola S.; Moura, Patricia L.C.; Castro, Lilian P. de; Avegliano, Roseane P.

    2009-01-01

    Neutron Activation Analysis, NAA, has been successfully used on a regularly basis in several areas of nutrition and foodstuffs. NAA has become an important and useful research tool due to the methodology's advantages. These include high accuracy, small quantities of samples and no chemical treatment. This technique allows the determination of important elements directly related to human health. NAA also provides data concerning essential and toxic concentrations in foodstuffs and specific diets. In this paper some studies in the area of nutrition which have been carried out at the Neutron Activation Laboratory of IPEN/CNEN-SP will be presented: a Brazilian total diet study: nutritional element dietary intakes of Sao Paulo state population; a study of trace element in maternal milk and the determination of essential trace elements in some edible mushrooms. (author)

  14. Downside Risk analysis applied to the Hedge Funds universe

    Perelló, Josep

    2007-09-01

    Hedge Funds are considered as one of the portfolio management sectors which shows a fastest growing for the past decade. An optimal Hedge Fund management requires an appropriate risk metrics. The classic CAPM theory and its Ratio Sharpe fail to capture some crucial aspects due to the strong non-Gaussian character of Hedge Funds statistics. A possible way out to this problem while keeping the CAPM simplicity is the so-called Downside Risk analysis. One important benefit lies in distinguishing between good and bad returns, that is: returns greater or lower than investor's goal. We revisit most popular Downside Risk indicators and provide new analytical results on them. We compute these measures by taking the Credit Suisse/Tremont Investable Hedge Fund Index Data and with the Gaussian case as a benchmark. In this way, an unusual transversal lecture of the existing Downside Risk measures is provided.

  15. Applying importance-performance analysis to evaluate banking service quality

    André Luís Policani Freitas

    2012-11-01

    Full Text Available In an increasingly competitive market, the identification of the most important aspects and the measurement of service quality as perceived by the customers are important actions taken by organizations which seek the competitive advantage. In particular, this scenario is typical of Brazilian banking sector. In this context, this article presents an exploratory case study in which the Importance-Performance Analysis (IPA was used to identify the strong and the weak points related to services provided by a bank. In order to check the reliability of the questionnaire, Cronbach's alpha and correlation analyses were used. The results are presented and some actions have been defined in order to improve the quality of services.

  16. Painleve singularity analysis applied to charged particle dynamics during reconnection

    Larson, J.W.

    1992-01-01

    For a plasma in the collisionless regime, test-particle modelling can lend some insight into the macroscopic behavior of the plasma, e.g. conductivity and heating. A common example for which this technique is used is a system with electric and magnetic fields given by B = δyx + zy + yz and E = εz, where δ, γ, and ε are constant parameters. This model can be used to model plasma behavior near neutral lines, (γ = 0), as well as current sheets (γ = 0, δ = 0). The integrability properties of the particle motion in such fields might affect the plasma's macroscopic behavior, and the author has asked the question open-quotes For what values of δ, γ, and ε is the system integrable?close quotes To answer this question, the author has employed Painleve singularity analysis, which is an examination of the singularity properties of a test particle's equations of motion in the complex time plane. This analysis has identified two field geometries for which the system's particle dynamics are integrable in terms of the second Painleve transcendent: the circular O-line case and the case of the neutral sheet configuration. These geometries yield particle dynamics that are integrable in the Liouville sense (i.e., there exist the proper number of integrals in involution) in an extended phase space which includes the time as a canonical coordinate, and this property is also true for nonzero γ. The singularity property tests also identified a large, dense set of X-line and O-line field geometries that yield dynamics that may possess the weak Painleve property. In the case of the X-line geometries, this result shows little relevance to the physical nature of the system, but the existence of a dense set of elliptical O-line geometries with this property may be related to the fact that for ε positive, one can construct asymptotic solutions in the limit t → ∞

  17. Economic analysis of medical management applied for left colostomy.

    Savlovschi, C; Serban, D; Andreescu, Cv; Dascalu, Am; Pantu, H

    2013-01-01

    This paper presents an analysis of surgical treatment costs for left colostomy, aiming to calculate a medium cost per procedure and to identify the means to maximize the economic management of this type of surgicale procedure. A retrospective study was conducted on a group of 8 patients hospitalized in the 4th Surgery Department,Emergency University Hospital Bucharest, during the year 2012 for left colic neoplasms with obstruction signs that were operated on with a left colostomy. The followed parameters in the studied group of patients were represented by medical expenses, divided in: preoperative, intra-operative and immediate postoperative (postop. hospitalization). Two major types of colostomy were performed: left loop colostomy with intact tumour for 6 patients and left end colostomy and tumour resection (Hartmann's procedure) for 2 patients. The medium cost of this type of surgical intervention was 4396.807 RON, representing 1068.742 euro. Statistic data analysis didn't reveal average costs to vary with the type of procedure. The age of the study subjects was between 49 and 88, with an average of 61 years, without it being possible to establish a correlation between patient age and the level of medical spendings. Reducing the costs involved by left colostomy can be efficiently done by decreasing the number of days of hospitalisation in the following ways: preoperative preparation and assessment of the subject in an outpatient regimen; the accuracy of the surgical procedure with the decrease of early postoperative complications and antibiotherapy- the second major cause of increased postoperative costs. Celsius.

  18. An Inverse Kinematic Approach Using Groebner Basis Theory Applied to Gait Cycle Analysis

    2013-03-01

    AN INVERSE KINEMATIC APPROACH USING GROEBNER BASIS THEORY APPLIED TO GAIT CYCLE ANALYSIS THESIS Anum Barki AFIT-ENP-13-M-02 DEPARTMENT OF THE AIR...copyright protection in the United States. AFIT-ENP-13-M-02 AN INVERSE KINEMATIC APPROACH USING GROEBNER BASIS THEORY APPLIED TO GAIT CYCLE ANALYSIS THESIS...APPROACH USING GROEBNER BASIS THEORY APPLIED TO GAIT CYCLE ANALYSIS Anum Barki, BS Approved: Dr. Ronald F. Tuttle (Chairman) Date Dr. Kimberly Kendricks

  19. Perturbation Method of Analysis Applied to Substitution Measurements of Buckling

    Persson, Rolf

    1966-11-15

    Calculations with two-group perturbation theory on substitution experiments with homogenized regions show that a condensation of the results into a one-group formula is possible, provided that a transition region is introduced in a proper way. In heterogeneous cores the transition region comes in as a consequence of a new cell concept. By making use of progressive substitutions the properties of the transition region can be regarded as fitting parameters in the evaluation procedure. The thickness of the region is approximately equal to the sum of 1/(1/{tau} + 1/L{sup 2}){sup 1/2} for the test and reference regions. Consequently a region where L{sup 2} >> {tau}, e.g. D{sub 2}O, contributes with {radical}{tau} to the thickness. In cores where {tau} >> L{sup 2} , e.g. H{sub 2}O assemblies, the thickness of the transition region is determined by L. Experiments on rod lattices in D{sub 2}O and on test regions of D{sub 2}O alone (where B{sup 2} = - 1/L{sup 2} ) are analysed. The lattice measurements, where the pitches differed by a factor of {radical}2, gave excellent results, whereas the determination of the diffusion length in D{sub 2}O by this method was not quite successful. Even regions containing only one test element can be used in a meaningful way in the analysis.

  20. Soft tissue cephalometric analysis applied to Himachali ethnic population

    Isha Aggarwal

    2016-01-01

    Full Text Available Introduction: The modern society considers facial attractiveness as an important physical attribute. The great variance in soft tissue drape of the human face complicates accurate assessment of the soft tissue profile, and it is a known fact that facial features of different ethnic groups differ significantly. This study was undertaken to establish norms for Himachali ethnic population. Materials and Methods: The sample comprised lateral cephalograms taken in natural head position of 100 normal individuals (50 males, 50 females. The cephalograms were analyzed by Arnett soft tissue cephalometric analysis for orthodontic diagnosis and treatment planning. Student's t-test was used to compare the means of the two groups. Results: Statistically significant differences were found between Himachali males and females in certain key parameters. Males have thicker soft tissue structures and a more acute nasolabial angle than females. Males have longer faces and females have greater interlabial gap and maxillary incisor exposure. Males have more deep-set facial structures than females. Conclusions: Statistically significant differences were found between Himachali males and females in certain key parameters. Differences were also noted between other ethnic groups and Himachali faces.

  1. MULTI-CRITERIA ANALYSIS APPLIED TO LANDSLIDE SUSCEPTIBILITY MAPPING

    Mariana Madruga de Brito

    2017-10-01

    Full Text Available This paper presents the application of a multi-criteria analysis (MCA tool for landslide susceptibility assessment in Porto Alegre municipality, southern Brazil. A knowledge driven approach was used, aiming to ensure an optimal use of the available information. The landslide conditioning factors considered were slope, lithology, flow accumulation and distance from lineaments. Standardization of these factors was done through fuzzy membership functions, and evaluation of their relative importance for landslide predisposition was supported by the analytic hierarchy process (AHP, based on local expert knowledge. Finally, factors were integrated in a GIS environment using the weighted linear combination (WLC method. For validation, an inventory, including 107 landslide points recorded between 2007 and 2013 was used. Results indicated that 8.2% (39.40 km² of the study area are highly and very highly susceptible to landslides. An overall accuracy of 95% was found, with an area under the receiver operating characteristic (ROC curve of 0.960. Therefore, the resulting map can be regarded as useful for monitoring landslide-prone areas. Based on the findings, it is concluded that the proposed method is effective for susceptibility assessment since it yielded meaningful results and does not require extensive input data.

  2. Applying Hierarchical Task Analysis Method to Discovery Layer Evaluation

    Marlen Promann

    2015-03-01

    Full Text Available Libraries are implementing discovery layers to offer better user experiences. While usability tests have been helpful in evaluating the success or failure of implementing discovery layers in the library context, the focus has remained on its relative interface benefits over the traditional federated search. The informal site- and context specific usability tests have offered little to test the rigor of the discovery layers against the user goals, motivations and workflow they have been designed to support. This study proposes hierarchical task analysis (HTA as an important complementary evaluation method to usability testing of discovery layers. Relevant literature is reviewed for the discovery layers and the HTA method. As no previous application of HTA to the evaluation of discovery layers was found, this paper presents the application of HTA as an expert based and workflow centered (e.g. retrieving a relevant book or a journal article method to evaluating discovery layers. Purdue University’s Primo by Ex Libris was used to map eleven use cases as HTA charts. Nielsen’s Goal Composition theory was used as an analytical framework to evaluate the goal carts from two perspectives: a users’ physical interactions (i.e. clicks, and b user’s cognitive steps (i.e. decision points for what to do next. A brief comparison of HTA and usability test findings is offered as a way of conclusion.

  3. Applied and computational harmonic analysis on graphs and networks

    Irion, Jeff; Saito, Naoki

    2015-09-01

    In recent years, the advent of new sensor technologies and social network infrastructure has provided huge opportunities and challenges for analyzing data recorded on such networks. In the case of data on regular lattices, computational harmonic analysis tools such as the Fourier and wavelet transforms have well-developed theories and proven track records of success. It is therefore quite important to extend such tools from the classical setting of regular lattices to the more general setting of graphs and networks. In this article, we first review basics of graph Laplacian matrices, whose eigenpairs are often interpreted as the frequencies and the Fourier basis vectors on a given graph. We point out, however, that such an interpretation is misleading unless the underlying graph is either an unweighted path or cycle. We then discuss our recent effort of constructing multiscale basis dictionaries on a graph, including the Hierarchical Graph Laplacian Eigenbasis Dictionary and the Generalized Haar-Walsh Wavelet Packet Dictionary, which are viewed as generalizations of the classical hierarchical block DCTs and the Haar-Walsh wavelet packets, respectively, to the graph setting. Finally, we demonstrate the usefulness of our dictionaries by using them to simultaneously segment and denoise 1-D noisy signals sampled on regular lattices, a problem where classical tools have difficulty.

  4. Applying revised gap analysis model in measuring hotel service quality.

    Lee, Yu-Cheng; Wang, Yu-Che; Chien, Chih-Hung; Wu, Chia-Huei; Lu, Shu-Chiung; Tsai, Sang-Bing; Dong, Weiwei

    2016-01-01

    With the number of tourists coming to Taiwan growing by 10-20 % since 2010, the number has increased due to an increasing number of foreign tourists, particularly after deregulation allowed admitting tourist groups, followed later on by foreign individual tourists, from mainland China. The purpose of this study is to propose a revised gap model to evaluate and improve service quality in Taiwanese hotel industry. Thus, service quality could be clearly measured through gap analysis, which was more effective for offering direction in developing and improving service quality. The HOLSERV instrument was used to identify and analyze service gaps from the perceptions of internal and external customers. The sample for this study included three main categories of respondents: tourists, employees, and managers. The results show that five gaps influenced tourists' evaluations of service quality. In particular, the study revealed that Gap 1 (management perceptions vs. customer expectations) and Gap 9 (service provider perceptions of management perceptions vs. service delivery) were more critical than the others in affecting perceived service quality, making service delivery the main area of improvement. This study contributes toward an evaluation of the service quality of the Taiwanese hotel industry from the perspectives of customers, service providers, and managers, which is considerably valuable for hotel managers. It was the aim of this study to explore all of these together in order to better understand the possible gaps in the hotel industry in Taiwan.

  5. Statistical analysis and Kalman filtering applied to nuclear materials accountancy

    Annibal, P.S.

    1990-08-01

    Much theoretical research has been carried out on the development of statistical methods for nuclear material accountancy. In practice, physical, financial and time constraints mean that the techniques must be adapted to give an optimal performance in plant conditions. This thesis aims to bridge the gap between theory and practice, to show the benefits to be gained from a knowledge of the facility operation. Four different aspects are considered; firstly, the use of redundant measurements to reduce the error on the estimate of the mass of heavy metal in an 'accountancy tank' is investigated. Secondly, an analysis of the calibration data for the same tank is presented, establishing bounds for the error and suggesting a means of reducing them. Thirdly, a plant-specific method of producing an optimal statistic from the input, output and inventory data, to help decide between 'material loss' and 'no loss' hypotheses, is developed and compared with existing general techniques. Finally, an application of the Kalman Filter to materials accountancy is developed, to demonstrate the advantages of state-estimation techniques. The results of the analyses and comparisons illustrate the importance of taking into account a complete and accurate knowledge of the plant operation, measurement system, and calibration methods, to derive meaningful results from statistical tests on materials accountancy data, and to give a better understanding of critical random and systematic error sources. The analyses were carried out on the head-end of the Fast Reactor Reprocessing Plant, where fuel from the prototype fast reactor is cut up and dissolved. However, the techniques described are general in their application. (author)

  6. Improving the flash flood frequency analysis applying dendrogeomorphological evidences

    Ruiz-Villanueva, V.; Ballesteros, J. A.; Bodoque, J. M.; Stoffel, M.; Bollschweiler, M.; Díez-Herrero, A.

    2009-09-01

    Flash floods are one of the natural hazards that cause major damages worldwide. Especially in Mediterranean areas they provoke high economic losses every year. In mountain areas with high stream gradients, floods events are characterized by extremely high flow and debris transport rates. Flash flood analysis in mountain areas presents specific scientific challenges. On one hand, there is a lack of information on precipitation and discharge due to a lack of spatially well distributed gauge stations with long records. On the other hand, gauge stations may not record correctly during extreme events when they are damaged or the discharge exceeds the recordable level. In this case, no systematic data allows improvement of the understanding of the spatial and temporal occurrence of the process. Since historic documentation is normally scarce or even completely missing in mountain areas, tree-ring analysis can provide an alternative approach. Flash floods may influence trees in different ways: (1) tilting of the stem through the unilateral pressure of the flowing mass or individual boulders; (2) root exposure through erosion of the banks; (3) injuries and scars caused by boulders and wood transported in the flow; (4) decapitation of the stem and resulting candelabra growth through the severe impact of boulders; (5) stem burial through deposition of material. The trees react to these disturbances with specific growth changes such as abrupt change of the yearly increment and anatomical changes like reaction wood or callus tissue. In this study, we sampled 90 cross sections and 265 increment cores of trees heavily affected by past flash floods in order to date past events and to reconstruct recurrence intervals in two torrent channels located in the Spanish Central System. The first study site is located along the Pelayo River, a torrent in natural conditions. Based on the external disturbances of trees and their geomorphological position, 114 Pinus pinaster (Ait

  7. Applied machine learning in greenhouse simulation; new application and analysis

    Morteza Taki

    2018-06-01

    Full Text Available Prediction the inside environment variables in greenhouses is very important because they play a vital role in greenhouse cultivation and energy lost especially in cold and hot regions. The greenhouse environment is an uncertain nonlinear system which classical modeling methods have some problems to solve it. So the main goal of this study is to select the best method between Artificial Neural Network (ANN and Support Vector Machine (SVM to estimate three different variables include inside air, soil and plant temperatures (Ta, Ts, Tp and also energy exchange in a polyethylene greenhouse in Shahreza city, Isfahan province, Iran. The environmental factors which influencing all the inside temperatures such as outside air temperature, wind speed and outside solar radiation were collected as data samples. In this research, 13 different training algorithms were used for ANN models (MLP-RBF. Based on K-fold cross validation and Randomized Complete Block (RCB methodology, the best model was selected. The results showed that the type of training algorithm and kernel function are very important factors in ANN (RBF and MLP and SVM models performance, respectively. Comparing RBF, MLP and SVM models showed that the performance of RBF to predict Ta, Tp and Ts variables is better according to small values of RMSE and MAPE and large value of R2 indices. The range of RMSE and MAPE factors for RBF model to predict Ta, Tp and Ts were between 0.07 and 0.12 °C and 0.28–0.50%, respectively. Generalizability and stability of the RBF model with 5-fold cross validation analysis showed that this method can use with small size of data groups. The performance of best model (RBF to estimate the energy lost and exchange in the greenhouse with heat transfer models showed that this method can estimate the real data in greenhouse and then predict the energy lost and exchange with high accuracy. Keywords: Black box method, Energy lost, Environmental situation, Energy

  8. Recent benthic foraminifera and sedimentary facies distribution of the Abu Dhabi (United Arab Emirates) coastline

    Fiorini, Flavia; Lokier, Stephen W.

    2014-05-01

    do not contain living foraminifera and the dead assemblage is mostly composed of a few specimens of coarse-sized Miliolidae with fragmented or abraded tests, probably transported from nearby environments. While the shallow-water settings of the Abu Dhabi coastline continue to be areas of active carbonate sedimentation, there have been significant changes in facies distributions over the last 50 years. In particular: × The opportunistic genera Ammonia and Elphidium have become more abundant. Reophax and Ammobaculites are reported in the area for the first time. × With anthropogenic activities some environments, such as inner lagoons, are lost whilst other areas show resilience to anthropogenic activities with little change in sedimentary facies distribution and foraminiferal assemblage. × No living foraminifera are found in dredged channels. The detailed analysis of these changes in foraminifera distribution and sedimentary facies allows us to further our understanding of the effects of anthropogenic activities on shallow-marine environments. By so doing, we are better able to distinguish between those changes that result from anthropogenic activities and those that are a result of naturally-occurring environmental perturbations.

  9. Exploratory Factor Analysis as a Construct Validation Tool: (Mis)applications in Applied Linguistics Research

    Karami, Hossein

    2015-01-01

    Factor analysis has been frequently exploited in applied research to provide evidence about the underlying factors in various measurement instruments. A close inspection of a large number of studies published in leading applied linguistic journals shows that there is a misconception among applied linguists as to the relative merits of exploratory…

  10. Applied Drama and the Higher Education Learning Spaces: A Reflective Analysis

    Moyo, Cletus

    2015-01-01

    This paper explores Applied Drama as a teaching approach in Higher Education learning spaces. The exploration takes a reflective analysis approach by first examining the impact that Applied Drama has had on my career as a Lecturer/Educator/Teacher working in Higher Education environments. My engagement with Applied Drama practice and theory is…

  11. A novel bi-level meta-analysis approach: applied to biological pathway analysis.

    Nguyen, Tin; Tagett, Rebecca; Donato, Michele; Mitrea, Cristina; Draghici, Sorin

    2016-02-01

    The accumulation of high-throughput data in public repositories creates a pressing need for integrative analysis of multiple datasets from independent experiments. However, study heterogeneity, study bias, outliers and the lack of power of available methods present real challenge in integrating genomic data. One practical drawback of many P-value-based meta-analysis methods, including Fisher's, Stouffer's, minP and maxP, is that they are sensitive to outliers. Another drawback is that, because they perform just one statistical test for each individual experiment, they may not fully exploit the potentially large number of samples within each study. We propose a novel bi-level meta-analysis approach that employs the additive method and the Central Limit Theorem within each individual experiment and also across multiple experiments. We prove that the bi-level framework is robust against bias, less sensitive to outliers than other methods, and more sensitive to small changes in signal. For comparative analysis, we demonstrate that the intra-experiment analysis has more power than the equivalent statistical test performed on a single large experiment. For pathway analysis, we compare the proposed framework versus classical meta-analysis approaches (Fisher's, Stouffer's and the additive method) as well as against a dedicated pathway meta-analysis package (MetaPath), using 1252 samples from 21 datasets related to three human diseases, acute myeloid leukemia (9 datasets), type II diabetes (5 datasets) and Alzheimer's disease (7 datasets). Our framework outperforms its competitors to correctly identify pathways relevant to the phenotypes. The framework is sufficiently general to be applied to any type of statistical meta-analysis. The R scripts are available on demand from the authors. sorin@wayne.edu Supplementary data are available at Bioinformatics online. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please e

  12. Stratigraphy and facies development of the marine Late Devonian near the Boulongour Reservoir, northwest Xinjiang, China

    Suttner, Thomas J.; Kido, Erika; Chen, Xiuqin; Mawson, Ruth; Waters, Johnny A.; Frýda, Jiří; Mathieson, David; Molloy, Peter D.; Pickett, John; Webster, Gary D.; Frýdová, Barbora

    2014-02-01

    Late Devonian to Early Carboniferous stratigraphic units within the 'Zhulumute' Formation, Hongguleleng Formation (stratotype), 'Hebukehe' Formation and the Heishantou Formation near the Boulongour Reservoir in northwestern Xinjiang are fossil-rich. The Hongguleleng and 'Hebukehe' formations are biostratigraphically well constrained by microfossils from the latest Frasnian linguiformis to mid-Famennian trachytera conodont biozones. The Hongguleleng Formation (96.8 m) is characterized by bioclastic argillaceous limestones and marls (the dominant facies) intercalated with green spiculitic calcareous shales. It yields abundant and highly diverse faunas of bryozoans, brachiopods and crinoids with subordinate solitary rugose corals, ostracods, trilobites, conodonts and other fish teeth. The succeeding 'Hebukehe' Formation (95.7 m) consists of siltstones, mudstones, arenites and intervals of bioclastic limestone (e.g. 'Blastoid Hill') and cherts with radiolarians. A diverse ichnofauna, phacopid trilobites, echinoderms (crinoids and blastoids) together with brachiopods, ostracods, bryozoans and rare cephalopods have been collected from this interval. Analysis of geochemical data, microfacies and especially the distribution of marine organisms, which are not described in detail here, but used for facies analysis, indicate a deepening of the depositional environment at the Boulongour Reservoir section. Results presented here concern mainly the sedimentological and stratigraphical context of the investigated section. Additionally, one Late Devonian palaeo-oceanic and biotic event, the Upper Kellwasser Event is recognized near the section base.

  13. Beyond Time out and Table Time: Today's Applied Behavior Analysis for Students with Autism

    Boutot, E. Amanda; Hume, Kara

    2012-01-01

    Recent mandates related to the implementation of evidence-based practices for individuals with autism spectrum disorder (ASD) require that autism professionals both understand and are able to implement practices based on the science of applied behavior analysis (ABA). The use of the term "applied behavior analysis" and its related concepts…

  14. Optical-televiewer-based identification and characterization of material facies associated with an Antarctic ice-shelf rift

    Hubbard, B.; Tison, J.-L.; Pattyn, F.; Dierckx, M.; Boereboom, T.; Samyn, D.

    2012-01-01

    We have drilled 13 boreholes within and around a through-cutting rift on the (unofficially named) Roi Baudouin Ice Shelf, East Antarctica. Logging by optical televiewer (OPTV) combined with core inspection has resulted in the identification and characterization of several material facies. Outside the rift, OPTV-imaged annual layering indicates ~150 years of accumulation over the 66m length of one of the boreholes. Luminosity analysis of this image also reveals the presence of numerous dark me...

  15. Zeolite facies and regional rank of bituminous coals

    Kisch, H J

    1966-01-01

    The author has correlated diagnostic analcime-, heulandite-, and laumontite-bearing mineral assemblages from four areas in the Upper Carboniferous and the Permian of New South Wales with the rank of the associated coals, represented by the carbon content of vitrinite. The results show that lowest-grade regional metamorphism of the zeolite facies reflects at least in part the same physical conditions of metamorphism as the increase in degree of coalification (rank) in the bituminous coal range. Degree of coalification is probably independent of partial pressures of H/sub 2/O and CO/sub 2/: it is controlled mainly by maximum depth of burial, its duration, and the geothermal gradient.

  16. Facies architecture and diagenesis of Belgian Late Frasnian carbonate mounds

    Boulvain, Frédéric

    2001-01-01

    Late Frasnian Petit-Mont Member carbonate mounds occur in the southern pail of the Dinant Synclinorium and in the Philippeville Anticline (SW Belgium). These mounds are 30 to 80 m thick and 100 to 250 m in diameter. They are embedded in shale, nodular shale and argillaceous limestone. Based on facies mapping of 14 buildups and related off-mound sediments, these mounds typically started from below the photic and storm wave base zones and builtup into shallow water environments. Above an argill...

  17. Prima facie evidence against spin-two Higgs impostors

    Ellis, John; Sanz, Veronica; You, Tevong

    2013-01-01

    The new particle X recently discovered by the ATLAS and CMS Collaborations is widely expected to have spin zero, but this remains to be determined. The leading alternative is that X has spin two, presumably with graviton-like couplings. We show that measurements of the X particle to pairs of vector bosons constrain such scenarios. In particular, a graviton-like Higgs impostor in scenarios with a warped extra dimension of AdS type is prima facie excluded, principally because they predict too s...

  18. HIV status: the prima facie right not to know the result.

    Chan, Tak Kwong

    2016-02-01

    When a patient regains consciousness from Cryptococcus meningitis, the clinician may offer an HIV test (in case it has not already been done) (scenario 1) or offer to tell the patient his HIV status (in case the test has already been performed with a positive result while the patient was unconscious) (scenario 2). Youngs and Simmonds proposed that the patient has the prima facie right to refuse an HIV test in scenario 1 but not the prima facie right not to be told the HIV status in scenario 2. I submit that the claims to the right of refusal in both scenarios are similarly strong as they should both be grounded in privacy, self determination or dignity. But a conscientious agent should bear in mind that members of the public also have the right not to be harmed. When the circumstance allows, a proper balance of the potential benefits and harm for all the competing parties should guide the clinical decision as to whose right should finally prevail. Where a full ethical analysis is not possible, the presumption should favour respecting the patient's right of refusal in both scenarios. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

  19. Introduction to applied statistical signal analysis guide to biomedical and electrical engineering applications

    Shiavi, Richard

    2007-01-01

    Introduction to Applied Statistical Signal Analysis is designed for the experienced individual with a basic background in mathematics, science, and computer. With this predisposed knowledge, the reader will coast through the practical introduction and move on to signal analysis techniques, commonly used in a broad range of engineering areas such as biomedical engineering, communications, geophysics, and speech.Introduction to Applied Statistical Signal Analysis intertwines theory and implementation with practical examples and exercises. Topics presented in detail include: mathematical

  20. Inclusive Elementary Classroom Teacher Knowledge of and Attitudes toward Applied Behavior Analysis and Autism Spectrum Disorder and Their Use of Applied Behavior Analysis

    McCormick, Jennifer A.

    2011-01-01

    The purpose of this study was to examine inclusive elementary teacher knowledge and attitude toward Autism Spectrum Disorder (ASD) and applied behavior analysis (ABA) and their use of ABA. Furthermore, this study examined if knowledge and attitude predicted use of ABA. A survey was developed and administered through a web-based program. Of the…

  1. Lower Tertiary Sedimentary Turbidite Facies at the Chicontepec Basin, East-Central Mexico

    Santillán-Piña N.

    2011-07-01

    Full Text Available The study area comprises the northwestern portion of the Chicontepec Basin at southeastern San Luis Potosí and northeastern Hidalgo States. At the stratigraphy sequences of the Chicontepec Formation from Lower Paleocene in isolated outocrops, were herein interpreted two major sedimentary sub-environments into the fan model: the middle and the external sedimentary settings; the applied criteria for their identification were: (a lithostratigraphic (thickness, geometry and distribution; (b internal and external primary sedimentary structures, and (c intra-formational deformation structures. The sedimentary facies are composed of siliciclastic and calcareous particles sourced from the Sierra Madre Oriental, western; the Tuxpan paleo-island, eastern; and from the Teziutlan Massif, southern; the sediments were massively transported by slideing, slumping, flow debris and turbidity currents, then deposited as massive, tabular, lenticular and lobely in shape at the slope foot and on the sea marine floor.

  2. Research in progress in applied mathematics, numerical analysis, and computer science

    1990-01-01

    Research conducted at the Institute in Science and Engineering in applied mathematics, numerical analysis, and computer science is summarized. The Institute conducts unclassified basic research in applied mathematics in order to extend and improve problem solving capabilities in science and engineering, particularly in aeronautics and space.

  3. Model Proposition for the Fiscal Policies Analysis Applied in Economic Field

    Larisa Preda

    2007-05-01

    Full Text Available This paper presents a study about fiscal policy applied in economic development. Correlations between macroeconomics and fiscal indicators signify the first steep in our analysis. Next step is a new model proposal for the fiscal and budgetary choices. This model is applied on the date of the Romanian case.

  4. Advantages and Drawbacks of Applying Periodic Time-Variant Modal Analysis to Spur Gear Dynamics

    Pedersen, Rune; Santos, Ilmar; Hede, Ivan Arthur

    2010-01-01

    to ensure sufficient accuracy of the results. The method of time-variant modal analysis is applied, and the changes in the fundamental and the parametric resonance frequencies as a function of the rotational speed of the gears, are found. By obtaining the stationary and parametric parts of the time...... of applying the methodology to wind turbine gearboxes are addressed and elucidated....

  5. Applied behavior analysis: understanding and changing behavior in the community-a representative review.

    Luyben, Paul D

    2009-01-01

    Applied behavior analysis, a psychological discipline, has been characterized as the science of behavior change (Chance, 2006). Research in applied behavior analysis has been published for approximately 40 years since the initial publication of the Journal of Applied Behavior Analysis in 1968. The field now encompasses a wide range of human behavior. Although much of the published research centers on problem behaviors that occur in schools and among people with disabilities, a substantial body of knowledge has emerged in community settings. This article provides a review of the behavioral community research published in the Journal of Applied Behavior Analysis as representative of this work, including research in the areas of home and family, health, safety, community involvement and the environment, recreation and sports, crime and delinquency, and organizations. In the interest of space, research in schools and with people with disabilities has been excluded from this review.

  6. Prima facie evidence against spin-two Higgs impostors

    Ellis, John; Sanz, Verónica; You, Tevong

    2013-10-01

    The new particle X recently discovered by the ATLAS and CMS Collaborations is widely expected to have spin zero, but this remains to be determined. The leading alternative is that X has spin two, presumably with graviton-like couplings. We show that measurements of the X particle to pairs of vector bosons constrain such scenarios. In particular, a graviton-like Higgs impostor in scenarios with a warped extra dimension of AdS type is prima facie excluded, principally because they predict too small a ratio between the X couplings to WW and ZZ, compared with that to photons. The data also disfavour universal couplings to pairs of photons and gluons, which would be predicted in a large class of graviton-like models.

  7. Prima Facie Evidence against Spin-Two Higgs Impostors

    Ellis, John; You, Tevong

    2013-01-01

    The new particle X recently discovered by the ATLAS and CMS Collaborations is widely expected to have spin zero, but this remains to be determined. The leading alternative is that X has spin two, presumably with graviton-like couplings. We show that measurements of the X particle to pairs of vector bosons constrain such scenarios. In particular, a graviton-like Higgs impostor in scenarios with a warped extra dimension of AdS type is prima facie excluded, principally because they predict too small a ratio between the X couplings to WW and ZZ, compared with that to photons. The data also disfavour universal couplings to pairs of photons and gluons, which would be predicted in a large class of graviton-like models.

  8. Prima facie evidence against spin-two Higgs impostors

    Ellis, John; Sanz, Verónica; You, Tevong

    2013-01-01

    The new particle X recently discovered by the ATLAS and CMS Collaborations is widely expected to have spin zero, but this remains to be determined. The leading alternative is that X has spin two, presumably with graviton-like couplings. We show that measurements of the X particle to pairs of vector bosons constrain such scenarios. In particular, a graviton-like Higgs impostor in scenarios with a warped extra dimension of AdS type is prima facie excluded, principally because they predict too small a ratio between the X couplings to WW and ZZ, compared with that to photons. The data also disfavour universal couplings to pairs of photons and gluons, which would be predicted in a large class of graviton-like models

  9. Prima facie evidence against spin-two Higgs impostors

    Ellis, John [Theoretical Particle Physics and Cosmology Group, Physics Department, King' s College London, London WC2R 2LS (United Kingdom); TH Division, Physics Department, CERN, CH-1211 Geneva 23 (Switzerland); Sanz, Verónica, E-mail: vsanz@yorku.ca [TH Division, Physics Department, CERN, CH-1211 Geneva 23 (Switzerland); Department of Physics and Astronomy, York University, Toronto, ON, M3J 1P3 (Canada); You, Tevong [Theoretical Particle Physics and Cosmology Group, Physics Department, King' s College London, London WC2R 2LS (United Kingdom)

    2013-10-07

    The new particle X recently discovered by the ATLAS and CMS Collaborations is widely expected to have spin zero, but this remains to be determined. The leading alternative is that X has spin two, presumably with graviton-like couplings. We show that measurements of the X particle to pairs of vector bosons constrain such scenarios. In particular, a graviton-like Higgs impostor in scenarios with a warped extra dimension of AdS type is prima facie excluded, principally because they predict too small a ratio between the X couplings to WW and ZZ, compared with that to photons. The data also disfavour universal couplings to pairs of photons and gluons, which would be predicted in a large class of graviton-like models.

  10. Asymmetrical cross-current turbidite facies tract in a structurally-confined mini-basin (Priabonian-Rupelian, Ranzano Sandstone, northern Apennines, Italy)

    Tinterri, R.; Laporta, M.; Ogata, K.

    2017-01-01

    This work discusses the stratigraphy and facies analysis of the Ranzano Sandstone, in the northern Apennines (Italy), a confined low-efficiency turbidite system deposited in a series of small piggy-back basins, which show strong analogies with intraslope minibasins commonly observed in divergent

  11. Critical Analysis of a Website: A Critique based on Critical Applied Linguistics and Critical Discourse Analysis

    Rina Agustina

    2013-05-01

    Full Text Available E-learning was easily found through browsing internet, which was mostly free of charge and provided various learning materials. Spellingcity.com was one of e-learning websites for teaching and learning English to learn spelling, vocabulary and writing, which offered various games and activities for young learners, 6 until 8 year old learners in particular. Having considered those constraints, this paper aimed to analyse the website from two different views: (1 critical applied linguistics  (CAL aspects and (2 critical  discourse analysis (CDA. After analysing the website using CAL and CDA, it was found that the website was adequate for beginner, in which it provided fun learning through games as well as challenged learners’ to test their vocabulary. Despite of these strengths, there were several issues required further thinking in terms of learners’ broad knowledge, such as, some of learning materials focused on states in America. It was quite difficult for EFL learners if they did not have adequate general knowledge. Thus, the findings implied that the website could be used as a supporting learning material, which accompanied textbooks and vocabulary exercise books.

  12. Two-point versus multiple-point geostatistics: the ability of geostatistical methods to capture complex geobodies and their facies associations—an application to a channelized carbonate reservoir, southwest Iran

    Hashemi, Seyyedhossein; Javaherian, Abdolrahim; Ataee-pour, Majid; Khoshdel, Hossein

    2014-01-01

    Facies models try to explain facies architectures which have a primary control on the subsurface heterogeneities and the fluid flow characteristics of a given reservoir. In the process of facies modeling, geostatistical methods are implemented to integrate different sources of data into a consistent model. The facies models should describe facies interactions; the shape and geometry of the geobodies as they occur in reality. Two distinct categories of geostatistical techniques are two-point and multiple-point (geo) statistics (MPS). In this study, both of the aforementioned categories were applied to generate facies models. A sequential indicator simulation (SIS) and a truncated Gaussian simulation (TGS) represented two-point geostatistical methods, and a single normal equation simulation (SNESIM) selected as an MPS simulation representative. The dataset from an extremely channelized carbonate reservoir located in southwest Iran was applied to these algorithms to analyze their performance in reproducing complex curvilinear geobodies. The SNESIM algorithm needs consistent training images (TI) in which all possible facies architectures that are present in the area are included. The TI model was founded on the data acquired from modern occurrences. These analogies delivered vital information about the possible channel geometries and facies classes that are typically present in those similar environments. The MPS results were conditioned to both soft and hard data. Soft facies probabilities were acquired from a neural network workflow. In this workflow, seismic-derived attributes were implemented as the input data. Furthermore, MPS realizations were conditioned to hard data to guarantee the exact positioning and continuity of the channel bodies. A geobody extraction workflow was implemented to extract the most certain parts of the channel bodies from the seismic data. These extracted parts of the channel bodies were applied to the simulation workflow as hard data

  13. Pilot points method for conditioning multiple-point statistical facies simulation on flow data

    Ma, Wei; Jafarpour, Behnam

    2018-05-01

    We propose a new pilot points method for conditioning discrete multiple-point statistical (MPS) facies simulation on dynamic flow data. While conditioning MPS simulation on static hard data is straightforward, their calibration against nonlinear flow data is nontrivial. The proposed method generates conditional models from a conceptual model of geologic connectivity, known as a training image (TI), by strategically placing and estimating pilot points. To place pilot points, a score map is generated based on three sources of information: (i) the uncertainty in facies distribution, (ii) the model response sensitivity information, and (iii) the observed flow data. Once the pilot points are placed, the facies values at these points are inferred from production data and then are used, along with available hard data at well locations, to simulate a new set of conditional facies realizations. While facies estimation at the pilot points can be performed using different inversion algorithms, in this study the ensemble smoother (ES) is adopted to update permeability maps from production data, which are then used to statistically infer facies types at the pilot point locations. The developed method combines the information in the flow data and the TI by using the former to infer facies values at selected locations away from the wells and the latter to ensure consistent facies structure and connectivity where away from measurement locations. Several numerical experiments are used to evaluate the performance of the developed method and to discuss its important properties.

  14. 17 CFR 270.3a-1 - Certain prima facie investment companies.

    2010-04-01

    ... 17 Commodity and Securities Exchanges 3 2010-04-01 2010-04-01 false Certain prima facie investment companies. 270.3a-1 Section 270.3a-1 Commodity and Securities Exchanges SECURITIES AND EXCHANGE COMMISSION (CONTINUED) RULES AND REGULATIONS, INVESTMENT COMPANY ACT OF 1940 § 270.3a-1 Certain prima facie investment...

  15. Delineating Facies Spatial Distribution by Integrating Ensemble Data Assimilation and Indicator Geostatistics with Level Set Transformation.

    Hammond, Glenn Edward; Song, Xuehang; Ye, Ming; Dai, Zhenxue; Zachara, John; Chen, Xingyuan

    2017-03-01

    A new approach is developed to delineate the spatial distribution of discrete facies (geological units that have unique distributions of hydraulic, physical, and/or chemical properties) conditioned not only on direct data (measurements directly related to facies properties, e.g., grain size distribution obtained from borehole samples) but also on indirect data (observations indirectly related to facies distribution, e.g., hydraulic head and tracer concentration). Our method integrates for the first time ensemble data assimilation with traditional transition probability-based geostatistics. The concept of level set is introduced to build shape parameterization that allows transformation between discrete facies indicators and continuous random variables. The spatial structure of different facies is simulated by indicator models using conditioning points selected adaptively during the iterative process of data assimilation. To evaluate the new method, a two-dimensional semi-synthetic example is designed to estimate the spatial distribution and permeability of two distinct facies from transient head data induced by pumping tests. The example demonstrates that our new method adequately captures the spatial pattern of facies distribution by imposing spatial continuity through conditioning points. The new method also reproduces the overall response in hydraulic head field with better accuracy compared to data assimilation with no constraints on spatial continuity on facies.

  16. Applied Behavior Analysis: Its Impact on the Treatment of Mentally Retarded Emotionally Disturbed People.

    Matson, Johnny L.; Coe, David A.

    1992-01-01

    This article reviews applications of the applied behavior analysis ideas of B. F. Skinner and others to persons with both mental retardation and emotional disturbance. The review examines implications of behavior analysis for operant conditioning and radical behaviorism, schedules of reinforcement, and emotion and mental illness. (DB)

  17. An Objective Comparison of Applied Behavior Analysis and Organizational Behavior Management Research

    Culig, Kathryn M.; Dickinson, Alyce M.; McGee, Heather M.; Austin, John

    2005-01-01

    This paper presents an objective review, analysis, and comparison of empirical studies targeting the behavior of adults published in Journal of Applied Behavior Analysis (JABA) and Journal of Organizational Behavior Management (JOBM) between 1997 and 2001. The purpose of the comparisons was to identify similarities and differences with respect to…

  18. Sociosexuality Education for Persons with Autism Spectrum Disorders Using Principles of Applied Behavior Analysis

    Wolfe, Pamela S.; Condo, Bethany; Hardaway, Emily

    2009-01-01

    Applied behavior analysis (ABA) has emerged as one of the most effective empirically based strategies for instructing individuals with autism spectrum disorders (ASD). Four ABA-based strategies that have been found effective are video modeling, visual strategies, social script fading, and task analysis. Individuals with ASD often struggle with…

  19. Applying Fuzzy and Probabilistic Uncertainty Concepts to the Material Flow Analysis of Palladium in Austria

    Laner, David; Rechberger, Helmut; Astrup, Thomas Fruergaard

    2015-01-01

    Material flow analysis (MFA) is a widely applied tool to investigate resource and recycling systems of metals and minerals. Owing to data limitations and restricted system understanding, MFA results are inherently uncertain. To demonstrate the systematic implementation of uncertainty analysis in ...

  20. A practical guide to propensity score analysis for applied clinical research.

    Lee, Jaehoon; Little, Todd D

    2017-11-01

    Observational studies are often the only viable options in many clinical settings, especially when it is unethical or infeasible to randomly assign participants to different treatment régimes. In such case propensity score (PS) analysis can be applied to accounting for possible selection bias and thereby addressing questions of causal inference. Many PS methods exist, yet few guidelines are available to aid applied researchers in their conduct and evaluation of a PS analysis. In this article we give an overview of available techniques for PS estimation and application, balance diagnostic, treatment effect estimation, and sensitivity assessment, as well as recent advances. We also offer a tutorial that can be used to emulate the steps of PS analysis. Our goal is to provide information that will bring PS analysis within the reach of applied clinical researchers and practitioners. Copyright © 2017 Elsevier Ltd. All rights reserved.

  1. Sedimentary environment and facies of St Lucia Estuary Mouth, Zululand, South Africa

    Wright, C. I.; Mason, T. R.

    The St. Lucia Estuary is situated on the subtropical, predominantly microtidal Zululand coast. Modern sedimentary environments within the estuary fall into three categories: (1) barrier environments; (2) abandoned channel environments; and (3) estuarine/lagoonal environments. The barrier-associated environment includes tidal inlet channel, inlet beach face, flood-tidal delta, ebb-tidal delta, spit, backspit and aeolian dune facies. The abandoned channel environment comprises washover fan, tidal creek tidal creek delta and back-barrier lagoon facies. The estuarine/lagoonal environment includes subtidal estuarine channel, side-attached bar, channel margin, mangrove fringe and channel island facies. Each sedimentary facies is characterised by sedimentary and biogenic structures, grain-size and sedimentary processes. Vertical facies sequences produced by inlet channel migration and lagoonal infilling are sufficiently distinct to be recognized in the geological record and are typical of a prograding shoreline.

  2. An Analysis of Methods Section of Research Reports in Applied Linguistics

    Patrícia Marcuzzo

    2011-01-01

    This work aims at identifying analytical categories and research procedures adopted in the analysis of research article in Applied Linguistics/EAP in order to propose a systematization of the research procedures in Genre Analysis. For that purpose, 12 research reports and interviews with four authors were analyzed. The analysis showed that the studies are concentrated on the investigation of the macrostructure or on the microstructure of research articles in different fields. Studies about th...

  3. The Adversarial Principle in Prima Facie Judgments of the Legal Thesis Firmed in the Trial of Repetitive Cases

    Juliana Provedel Cardoso

    2016-10-01

    Full Text Available The present articles objective is to analyse the highly effective adversarial principle from the Constitutional Democratic State of Law and the cooperative process structure. In this sense, an analysis of the repetitive cases model is made with special relevance to the Civil Procedure Codice 2015, put in evidence the preliminary injunction, the repetitive appeals and the resolution incident repetitive demands. With the establishment of the premises, an analysis of the adversarial principle is made on prima facie judgments of the legal thesis firmed in the trial of repetitive cases, in view of the motivation of the court decision (speech of the case and law (speech of the precedents.

  4. Assessing Biogenecity of Stromatolites: Return to the Facies

    Shapiro, R. S.; Jameson, S.; Rutter, A.; McCarthy, K.; Planavsky, N. J.; Severson, M.

    2013-12-01

    The discovery of richly microfossiliferous cherty stromatolites near Schreiber and Kakabeka Falls, Ontario, in the 1.9 Ga Gunflint Iron Formation, firmly established the field of pre-Cambrian paleontology. In the half-century since this discovery, paradigm shifts in the ecology of the microfossils as well as the utility of stromatolites as biological markers has caused a re-evaluation of our understanding of the pre-Cambrian fossil record. This research summarizes facies evaluation of the two stromatolite marker beds in the Gunflint-correlative Biwabik Iron Formation of Minnesota. The centimeter-scale microstratigraphy of cores drilled through the central and eastern Mesabi Iron Range was coupled with field descriptions of outcrops and mines in both the Biwabik and Gunflint iron formations. Eight lithologic facies associated with the stromatolites are identified: A) Pebble conglomerate clasts ranging in size of 0.5-3 cm, syneresis cracks, and septarian nodules with medium to coarse grain matrix; B) siltstone with subparallel sub-mm to 5 cm magnetitic and non-magnetic bands; C) stromatolitic boundstone comprising stratiform, pseudocolumnar, domal, undulatory, flat-laminated, dendritic, columnar, and mico-digitate forms and oncoids 0.5 to 2 cm diameter; D) grainstone with medium to coarse siliceous and carbonate ooids and peloids; E) massive green crystalline beds with bands of magnetite, quartz, calcite, disseminated pyrite and localized ankerite; F) autobreccicated fabric of 0.3 to 10 mm clasts; G) medium to coarse sandstone; H) quartzite. Correlation between 11 cores near Hoyt Lakes and 9 cores through the basal stromatolite layer at the MinnTac Mine near Virginia revealed that stromatolites formed both on conglomerate and medium quartz sandstone. Multiple forms of stromatolite may occur in a vertical succession (flat-laminated to undulatory to psuedocolumnar to columnar) or a core may be dominated by one type, typically columnar-stratiform. Where stromatolites do

  5. Towards factor analysis exploration applied to positron emission tomography functional imaging for breast cancer characterization

    Rekik, W.; Ketata, I.; Sellami, L.; Ben slima, M.; Ben Hamida, A.; Chtourou, K.; Ruan, S.

    2011-01-01

    This paper aims to explore the factor analysis when applied to a dynamic sequence of medical images obtained using nuclear imaging modality, Positron Emission Tomography (PET). This latter modality allows obtaining information on physiological phenomena, through the examination of radiotracer evolution during time. Factor analysis of dynamic medical images sequence (FADMIS) estimates the underlying fundamental spatial distributions by factor images and the associated so-called fundamental functions (describing the signal variations) by factors. This method is based on an orthogonal analysis followed by an oblique analysis. The results of the FADMIS are physiological curves showing the evolution during time of radiotracer within homogeneous tissues distributions. This functional analysis of dynamic nuclear medical images is considered to be very efficient for cancer diagnostics. In fact, it could be applied for cancer characterization, vascularization as well as possible evaluation of response to therapy.

  6. International publication trends in the Journal of Applied Behavior Analysis: 2000-2014.

    Martin, Neil T; Nosik, Melissa R; Carr, James E

    2016-06-01

    Dymond, Clarke, Dunlap, and Steiner's (2000) analysis of international publication trends in the Journal of Applied Behavior Analysis (JABA) from 1970 to 1999 revealed low numbers of publications from outside North America, leading the authors to express concern about the lack of international involvement in applied behavior analysis. They suggested that a future review would be necessary to evaluate any changes in international authorship in the journal. As a follow-up, we analyzed non-U.S. publication trends in the most recent 15 years of JABA and found similar results. We discuss potential reasons for the relative paucity of international authors and suggest potential strategies for increasing non-U.S. contributions to the advancement of behavior analysis. © 2015 Society for the Experimental Analysis of Behavior.

  7. Marine habitat mapping of the Milford Haven Waterway, Wales, UK: Comparison of facies mapping and EUNIS classification for monitoring sediment habitats in an industrialized estuary

    Carey, Drew A.; Hayn, Melanie; Germano, Joseph D.; Little, David I.; Bullimore, Blaise

    2015-06-01

    A detailed map and dataset of sedimentary habitats of the Milford Haven Waterway (MHW) was compiled for the Milford Haven Waterway Environmental Surveillance Group (MHWESG) from seafloor images collected in May, 2012 using sediment-profile and plan-view imaging (SPI/PV) survey techniques. This is the most comprehensive synoptic assessment of sediment distribution and benthic habitat composition available for the MHW, with 559 stations covering over 40 km2 of subtidal habitats. In the context of the MHW, an interpretative framework was developed that classified each station within a 'facies' that included information on the location within the waterway and inferred sedimentary and biological processes. The facies approach provides critical information on landscape-scale habitats including relative location and inferred sediment transport processes and can be used to direct future monitoring activities within the MHW and to predict areas of greatest potential risk from contaminant transport. Intertidal sediment 'facies' maps have been compiled in the past for MHW; this approach was expanded to map the subtidal portions of the waterway. Because sediment facies can be projected over larger areas than individual samples (due to assumptions based on physiography, or landforms) they represent an observational model of the distribution of sediments in an estuary. This model can be tested over time and space through comparison with additional past or future sample results. This approach provides a means to evaluate stability or change in the physical and biological conditions of the estuarine system. Initial comparison with past results for intertidal facies mapping and grain size analysis from grab samples showed remarkable stability over time for the MHW. The results of the SPI/PV mapping effort were cross-walked to the European Nature Information System (EUNIS) classification to provide a comparison of locally derived habitat mapping with European-standard habitat

  8. Middle Eocene seagrass facies from Apennine carbonate platforms (Italy)

    Tomassetti, Laura; Benedetti, Andrea; Brandano, Marco

    2016-04-01

    Two stratigraphic sections located in the Latium-Abruzzi (Monte Porchio, Central Apennines, Central Italy) and in the Apulian carbonate platform (S. Cesarea-Torre Tiggiano, Salento, Southern Italy) were measured and sampled to document the sedimentological characteristic and the faunistic assemblages of Middle Eocene seagrass deposits. The faunistic assemblages are dominated by porcellaneous foraminifera Orbitolites, Alveolina, Idalina, Spiroloculina, Quinqueloculina, Triloculina and abundant hooked-shaped gypsinids, associated with hooked red algae and green algae Halimeda. Fabiania, rotaliids and textulariids as well as nummulitids are subordinated. The samples were assigned to Lutetian (SBZ13-16) according to the occurrence of Nummulites cf. lehneri, Alveolina ex. gr. elliptica, Idalina berthelini, Orbitolites complanatus, Slovenites decastroi and Medocia blayensis. At Santa Cesarea reticulate nummulites occur in association with Alveolina spp. and Halkyardia minima marking the lower Bartonian (SBZ17). Three main facies associations have been recognised: I) larger porcellaneous foraminiferal grainstones with orbitolitids and alveolinids deposited into high-energy shallow-water settings influenced by wave processes that reworked the sediments associated with a seagrass; II) grainstone to packstone with small porcellaneous foraminifera and abundant permanently-attached gypsinids deposited in a more protected (e.g., small embayment) in situ vegetated environment; III) bioclastic packstone with parautochthonous material reworked from the seagrass by rip currents and accumulated into rip channels in a slightly deeper environment. The biotic assemblages suggest that the depositional environment is consistent with tropical to subtropical vegetated environments within oligotrophic conditions.

  9. Dating Metasomatism: Monazite and Zircon Growth during Amphibolite Facies Albitization

    Cailey B. Condit

    2018-04-01

    Full Text Available We present coupled textural observations and trace element and geochronological data from metasomatic monazite and zircon, to constrain the timing of high-grade Na-metasomatism (albitization of an Archean orthogneiss in southwest Montana, USA. Field, mineral textures, and geochemical evidence indicate albitization occurred as a rind along the margin of a ~3.2 Ga granodioritic orthogneiss (Pl + Hbl + Kfs + Qz + Bt + Zrn exposed in the Northern Madison range. The metasomatic product is a weakly deformed albitite (Ab + Bt + OAm + Zrn + Mnz + Ap + Rt. Orthoamphibole and biotite grew synkinematically with the regional foliation fabric, which developed during metamorphism that locally peaked at upper amphibolite-facies during the 1800–1710 Ma Big Sky orogeny. Metasomatism resulted in an increase in Na, a decrease in Ca, K, Ba, Fe, and Sr, a complete transformation of plagioclase and K-feldspar into albite, and loss of quartz. In situ geochronology on zoned monazite and zircon indicate growth by dissolution–precipitation in both phases at ~1750–1735 Ma. Trace element geochemistry of rim domains in these phases are best explained by dissolution–reprecipitation in equilibrium with Na-rich fluid. Together, these data temporally and mechanistically link metasomatism with high-grade tectonism and prograde metamorphism during the Big Sky orogeny.

  10. Combined tide and storm influence on facies sedimentation of miocene Miri Formation, Sarawak

    Yuniarta Ulfa; Nasiman Sapari; Zuhar Zahir Tuan Harith

    2011-01-01

    This study was conducted on the sedimentary rocks belonging to the Miri Formation (Middle - Late Miocene). The primary objective of the present study is to provide additional interpretation on the stratigraphy of the Miri Formation in the Miri Field based on the new information gathered from new outcrops in the area. Five outcrops were examined in detail on sedimentology and stratigraphy. Based on lithology, sedimentary structures, bedding geometry and traces fossil, the sediments of the Miri Formation were grouped into fourteen lithofacies. Influence of tide and storm during the depositional processes of the formation were indicated by the group of two main facies associations which are: (i) tide-dominated estuary; and (ii) wave-and-storm dominated facies associations. The tide-dominated estuary system of the Miri Formation are includes variety of sub environments: estuary mouth or tidal channel and sand bars (characterized by trough cross-stratified sandstone with mud drapes facies), estuary channel or upper flow regime of sand flat (characterized by parallel stratified sandstone with mud-laminas facies), mixed-tidal flat (characterized by wavy and flaser bedded sandstone facies), and mud-tidal flat (characterized by rhythmic stratified sandstone-mudstone and lenticular bedding facies). The wave-and-storm dominated varied from lower to middle shore face (characterized by hummocky cross-stratified sandstone and rhythmic parallel stratified sandstone and laminated siltstone facies), upper shore face (characterized by swaley cross-stratified sandstone), lower shore face inter bedded to bioturbated sandstone and siltstone facies), and offshore transitional (characterized by bioturbated sandstone and mudstone inter bedding with parallel to hummocky cross-stratified sandstone facies). (author)

  11. August Dvorak (1894-1975): Early expressions of applied behavior analysis and precision teaching

    Joyce, Bonnie; Moxley, Roy A.

    1988-01-01

    August Dvorak is best known for his development of the Dvorak keyboard. However, Dvorak also adapted and applied many behavioral and scientific management techniques to the field of education. Taken collectively, these techniques are representative of many of the procedures currently used in applied behavior analysis, in general, and especially in precision teaching. The failure to consider Dvorak's instructional methods may explain some of the discrepant findings in studies which compare the efficiency of the Dvorak to the standard keyboard. This article presents a brief background on the development of the standard (QWERTY) and Dvorak keyboards, describes parallels between Dvorak's teaching procedures and those used in precision teaching, reviews some of the comparative research on the Dvorak keyboard, and suggests some implications for further research in applying the principles of behavior analysis. PMID:22477993

  12. Lithofacies-paleo-geography and uranium sedimentary facies in Hailar basin

    Qi Fucheng

    1992-01-01

    Cretaceous-Tertiary sedimentary paleo-structure and lithofacies-paleo-geography in Hailar Basin are described. Taking Chenqi coal field as an example, the sedimentary facies pattern of coal-bearing series characterized by alternating sedimentation of fluviatile and lacustrine-swampy facies is reconstructed. It is pointed out that this sedimentary facies not only controls the sedimentation and distribution of syngenetic uranium mineralization, but also is a favourable place that converges uranium-bearing solution and reduces and precipitates uranium for the second time in epigenetic mineralization

  13. Upper Cretaceous chalk facies and depositional history recorded in the Mona-1 core, Mona Ridge

    Anderskouv, Kresten; Surlyk, Finn

    2011-01-01

    , including mudflow, debris flow, and slumping. Pelagic deposits vary mainly in terms of the concentration of siliciclastic material, the trace-fossil assemblage, and the presence or ab­sence of primary sedimentary structures. Pelagic sedimentation was probably punctuated by the deposition of thin turbidites...... slump packages (14–18 in total) are interpreted, forming over 40% of the succession; debrites appear to be the most common precursor facies involved in slumping. The vertical succession of facies records an earliest Cenomanian facies shift from dominantly siliciclastic to chalk deposition...

  14. Exploring Peer Relationships, Friendships and Group Work Dynamics in Higher Education: Applying Social Network Analysis

    Mamas, Christoforos

    2018-01-01

    This study primarily applied social network analysis (SNA) to explore the relationship between friendships, peer social interactions and group work dynamics within a higher education undergraduate programme in England. A critical case study design was adopted so as to allow for an in-depth exploration of the students' voice. In doing so, the views…

  15. Conversation after Right Hemisphere Brain Damage: Motivations for Applying Conversation Analysis

    Barnes, Scott; Armstrong, Elizabeth

    2010-01-01

    Despite the well documented pragmatic deficits that can arise subsequent to Right Hemisphere Brain Damage (RHBD), few researchers have directly studied everyday conversations involving people with RHBD. In recent years, researchers have begun applying Conversation Analysis (CA) to the everyday talk of people with aphasia. This research programme…

  16. Evolution of Applied Behavior Analysis in the Treatment of Individuals With Autism

    Wolery, Mark; Barton, Erin E.; Hine, Jeffrey F.

    2005-01-01

    Two issues of each volume of the Journal of Applied Behavior Analysis were reviewed to identify research reports focusing on individuals with autism. The identified articles were analyzed to describe the ages of individuals with autism, the settings in which the research occurred, the nature of the behaviors targeted for intervention, and the…

  17. Lovaas Model of Applied Behavior Analysis. What Works Clearinghouse Intervention Report

    What Works Clearinghouse, 2010

    2010-01-01

    The "Lovaas Model of Applied Behavior Analysis" is a type of behavioral therapy that initially focuses on discrete trials: brief periods of one-on-one instruction, during which a teacher cues a behavior, prompts the appropriate response, and provides reinforcement to the child. Children in the program receive an average of 35 to 40 hours…

  18. Applied Behavior Analysis Programs for Autism: Sibling Psychosocial Adjustment during and Following Intervention Use

    Cebula, Katie R.

    2012-01-01

    Psychosocial adjustment in siblings of children with autism whose families were using a home-based, applied behavior analysis (ABA) program was compared to that of siblings in families who were not using any intensive autism intervention. Data gathered from parents, siblings and teachers indicated that siblings in ABA families experienced neither…

  19. Applied Behavior Analysis in Autism Spectrum Disorders: Recent Developments, Strengths, and Pitfalls

    Matson, Johnny L.; Turygin, Nicole C.; Beighley, Jennifer; Rieske, Robert; Tureck, Kimberly; Matson, Michael L.

    2012-01-01

    Autism has become one of the most heavily researched topics in the field of mental health and education. While genetics has been the most studied of all topics, applied behavior analysis (ABA) has also received a great deal of attention, and has arguably yielded the most promising results of any research area to date. The current paper provides a…

  20. A Self-Administered Parent Training Program Based upon the Principles of Applied Behavior Analysis

    Maguire, Heather M.

    2012-01-01

    Parents often respond to challenging behavior exhibited by their children in such a way that unintentionally strengthens it. Applied behavior analysis (ABA) is a research-based science that has been proven effective in remediating challenging behavior in children. Although many parents could benefit from using strategies from the field of ABA with…

  1. A National UK Census of Applied Behavior Analysis School Provision for Children with Autism

    Griffith, G. M.; Fletcher, R.; Hastings, R. P.

    2012-01-01

    Over more than a decade, specialist Applied Behavior Analysis (ABA) schools or classes for children with autism have developed in the UK and Ireland. However, very little is known internationally about how ABA is defined in practice in school settings, the characteristics of children supported in ABA school settings, and the staffing structures…

  2. A Case Study in the Misrepresentation of Applied Behavior Analysis in Autism: The Gernsbacher Lectures

    Morris, Edward K

    2009-01-01

    I know that most men, including those at ease with problems of the greatest complexity, can seldom accept the simplest and most obvious truth if it be such as would oblige them to admit the falsity of conclusions which they have proudly taught to others, and which they have woven, thread by thread, into the fabrics of their life. (Tolstoy, 1894) This article presents a case study in the misrepresentation of applied behavior analysis for autism based on Morton Ann Gernsbacher's presentation of a lecture titled “The Science of Autism: Beyond the Myths and Misconceptions.” Her misrepresentations involve the characterization of applied behavior analysis, descriptions of practice guidelines, reviews of the treatment literature, presentations of the clinical trials research, and conclusions about those trials (e.g., children's improvements are due to development, not applied behavior analysis). The article also reviews applied behavior analysis' professional endorsements and research support, and addresses issues in professional conduct. It ends by noting the deleterious effects that misrepresenting any research on autism (e.g., biological, developmental, behavioral) have on our understanding and treating it in a transdisciplinary context. PMID:22478522

  3. Preliminary Hazard Analysis applied to Uranium Hexafluoride - UF6 production plant

    Tomzhinsky, David; Bichmacher, Ricardo; Braganca Junior, Alvaro; Peixoto, Orpet Jose

    1996-01-01

    The purpose of this paper is to present the results of the Preliminary hazard Analysis applied to the UF 6 Production Process, which is part of the UF 6 Conversion Plant. The Conversion Plant has designed to produce a high purified UF 6 in accordance with the nuclear grade standards. This Preliminary Hazard Analysis is the first step in the Risk Management Studies, which are under current development. The analysis evaluated the impact originated from the production process in the plant operators, members of public, equipment, systems and installations as well as the environment. (author)

  4. [Burden of proof in medical cases--presumption of fact and prima facie evidence. II. Presumption of fact and prima facie evidence].

    Sliwka, Marcin

    2004-01-01

    The aim of this paper was to present the main rules concerning the burden of proof in polish civil trials, including medical cases. The standard rules were presented with all the important exclusions such as presumption of law and fact or prima facie evidence. The author analyses the effect of these institutions on burden of proof in medical cases. The difference between presumptions of fact and prima facie evidence was analysed and explained. This paper also describes the importance of the res ipsa loquitur rule in United Kingdom and USA. This paper includes numerous High Court sentences on evidential and medical issues.

  5. Research in progress in applied mathematics, numerical analysis, fluid mechanics, and computer science

    1994-01-01

    This report summarizes research conducted at the Institute for Computer Applications in Science and Engineering in applied mathematics, fluid mechanics, and computer science during the period October 1, 1993 through March 31, 1994. The major categories of the current ICASE research program are: (1) applied and numerical mathematics, including numerical analysis and algorithm development; (2) theoretical and computational research in fluid mechanics in selected areas of interest to LaRC, including acoustics and combustion; (3) experimental research in transition and turbulence and aerodynamics involving LaRC facilities and scientists; and (4) computer science.

  6. Distinguishing fluvio-deltaic facies by bulk geochemistry and heavy minerals: an example from the Miocene of Denmark

    Olivarius, Mette; Rasmussen, Erik S.; Siersma, Volkert Dirk

    2011-01-01

    Interpretations of seismic profiles, gamma-ray logs and sediment descriptions were used to classify seven facies in Miocene fluvio-deltaic deposits ofDenmark. An impartial approach was adopted by not including analytical data in the facies definition. This approach allowed identification of signi......Interpretations of seismic profiles, gamma-ray logs and sediment descriptions were used to classify seven facies in Miocene fluvio-deltaic deposits ofDenmark. An impartial approach was adopted by not including analytical data in the facies definition. This approach allowed identification...... grain size of quartz and heavy minerals from the channel facies towards the delta shoreface facies and further along the coast to the spit shoreface facies is associated with an increase in sorting and textural maturity. This trend is related to longshore drift. Increasing heavy mineral grain size...... is found from the delta slope facies offshore to the delta toe and shelf facies. This trend is interpreted as a result of sorting by turbidity currents. The mixed origin of the transgressive lag facies is shown by the poorer sorting in this facies. By indicating the amount of alteration the sediments have...

  7. Polymetamorphic evolution of the granulite-facies Paleoproterozoic basement of the Kabul Block, Afghanistan

    Collett, Stephen; Faryad, Shah Wali; Mosazai, Amir Mohammad

    2015-08-01

    The Kabul Block is an elongate crustal fragment which cuts across the Afghan Central Blocks, adjoining the Indian and Eurasian continents. Bounded by major strike slip faults and ophiolitic material thrust onto either side, the block contains a strongly metamorphosed basement consisting of some of the only quantifiably Proterozoic rocks south of the Herat-Panjshir Suture Zone. The basement rocks crop-out extensively in the vicinity of Kabul City and consist predominantly of migmatites, gneisses, schists and small amounts of higher-grade granulite-facies rocks. Granulite-facies assemblages were identified in felsic and mafic siliceous rocks as well as impure carbonates. Granulite-facies conditions are recorded by the presence of orthopyroxene overgrowing biotite in felsic rocks; by orthopyroxene overgrowing amphibole in mafic rocks and by the presence of olivine and clinohumite in the marbles. The granulite-facies assemblages are overprinted by a younger amphibolite-facies event that is characterized by the growth of garnet at the expense of the granulite-facies phases. Pressure-temperature (P-T) conditions for the granulite-facies event of around 850 °C and up to 7 kbar were calculated through conventional thermobarometry and phase equilibria modeling. The younger, amphibolite-facies event shows moderately higher pressures of up to 8.5 kbar at around 600 °C. This metamorphism likely corresponds to the dominant metamorphic event within the basement of the Kabul Block. The results of this work are combined with the litho-stratigraphic relations and recent geochronological dating to analyze envisaged Paleoproterozoic and Neoproterozoic metamorphic events in the Kabul Block.

  8. A Study in the Founding of Applied Behavior Analysis Through Its Publications

    Morris, Edward K.; Altus, Deborah E.; Smith, Nathaniel G.

    2013-01-01

    This article reports a study of the founding of applied behavior analysis through its publications. Our methods included hand searches of sources (e.g., journals, reference lists), search terms (i.e., early, applied, behavioral, research, literature), inclusion criteria (e.g., the field's applied dimension), and (d) challenges to their face and content validity. Our results were 36 articles published between 1959 and 1967 that we organized into 4 groups: 12 in 3 programs of research and 24 others. Our discussion addresses (a) limitations in our method (e.g., the completeness of our search), (b) challenges to the validity of our methods and results (e.g., convergent validity), and (c) priority claims about the field's founding. We conclude that the claims are irresolvable because identification of the founding publications depends significantly on methods and because the field's founding was an evolutionary process. We close with suggestions for future research. PMID:25729133

  9. [Statistical analysis of articles in "Chinese journal of applied physiology" from 1999 to 2008].

    Du, Fei; Fang, Tao; Ge, Xue-ming; Jin, Peng; Zhang, Xiao-hong; Sun, Jin-li

    2010-05-01

    To evaluate the academic level and influence of "Chinese Journal of Applied Physiology" through statistical analysis for the fund sponsored articles published in the recent ten years. The articles of "Chinese Journal of Applied Physiology" from 1999 to 2008 were investigated. The number and the percentage of the fund sponsored articles, the fund organization and the author region were quantitatively analyzed by using the literature metrology method. The number of the fund sponsored articles increased unceasingly. The ratio of the fund from local government significantly enhanced in the latter five years. Most of the articles were from institutes located at Beijing, Zhejiang and Tianjin. "Chinese Journal of Applied Physiology" has a fine academic level and social influence.

  10. A study in the founding of applied behavior analysis through its publications.

    Morris, Edward K; Altus, Deborah E; Smith, Nathaniel G

    2013-01-01

    This article reports a study of the founding of applied behavior analysis through its publications. Our methods included hand searches of sources (e.g., journals, reference lists), search terms (i.e., early, applied, behavioral, research, literature), inclusion criteria (e.g., the field's applied dimension), and (d) challenges to their face and content validity. Our results were 36 articles published between 1959 and 1967 that we organized into 4 groups: 12 in 3 programs of research and 24 others. Our discussion addresses (a) limitations in our method (e.g., the completeness of our search), (b) challenges to the validity of our methods and results (e.g., convergent validity), and (c) priority claims about the field's founding. We conclude that the claims are irresolvable because identification of the founding publications depends significantly on methods and because the field's founding was an evolutionary process. We close with suggestions for future research.

  11. Reliability analysis of protection systems in NPP applying fault-tree analysis method

    Bokor, J.; Gaspar, P.; Hetthessy, J.; Szabo, G.

    1998-01-01

    This paper demonstrates the applicability and limits of dependability analysis in nuclear power plants (NPPS) based on the reactor protection refurbishment project (RRP) in NPP Paks. This paper illustrates case studies from the reliability analysis for NPP Paks. It also investigates the solutions for the connection between the data acquisition and subsystem control units (TSs) and the voter units (VTs), it analyzes the influence of the voting in the VT computer level, it studies the effects of the testing procedures to the dependability parameters. (author)

  12. Applying behavior analysis to school violence and discipline problems: Schoolwide positive behavior support

    Anderson, Cynthia M.; Kincaid, Donald

    2005-01-01

    School discipline is a growing concern in the United States. Educators frequently are faced with discipline problems ranging from infrequent but extreme problems (e.g., shootings) to less severe problems that occur at high frequency (e.g., bullying, insubordination, tardiness, and fighting). Unfortunately, teachers report feeling ill prepared to deal effectively with discipline problems in schools. Further, research suggests that many commonly used strategies, such as suspension, expulsion, and other reactive strategies, are not effective for ameliorating discipline problems and may, in fact, make the situation worse. The principles and technology of behavior analysis have been demonstrated to be extremely effective for decreasing problem behavior and increasing social skills exhibited by school children. Recently, these principles and techniques have been applied at the level of the entire school, in a movement termed schoolwide positive behavior support. In this paper we review the tenets of schoolwide positive behavior support, demonstrating the relation between this technology and applied behavior analysis. PMID:22478439

  13. Common cause evaluations in applied risk analysis of nuclear power plants

    Taniguchi, T.; Ligon, D.; Stamatelatos, M.

    1983-04-01

    Qualitative and quantitative approaches were developed for the evaluation of common cause failures (CCFs) in nuclear power plants and were applied to the analysis of the auxiliary feedwater systems of several pressurized water reactors (PWRs). Key CCF variables were identified through a survey of experts in the field and a review of failure experience in operating PWRs. These variables were classified into categories of high, medium, and low defense against a CCF. Based on the results, a checklist was developed for analyzing CCFs of systems. Several known techniques for quantifying CCFs were also reviewed. The information provided valuable insights in the development of a new model for estimating CCF probabilities, which is an extension of and improvement over the Beta Factor method. As applied to the analysis of the PWR auxiliary feedwater systems, the method yielded much more realistic values than the original Beta Factor method for a one-out-of-three system

  14. Residual analysis applied to S-N data of a surface rolled cast iron

    Omar Maluf

    2005-09-01

    Full Text Available Surface rolling is a process extensively employed in the manufacture of ductile cast iron crankshafts, specifically in regions containing stress concentrators with the main aim to enhance fatigue strength. Such process hardens and introduces compressive residual stresses to the surface as a result of controlled strains, reducing cyclic tensile stresses near the surface of the part. The main purpose of this work was to apply the residual analysis to check the suitability of the S-N approach to describe the fatigue properties of a surface rolled cast iron. The analysis procedure proved to be very efficient and easy to implement and it can be applied in the verification of any other statistical model used to describe fatigue behavior. Results show that the conventional S-N methodology is able to model the high cycle fatigue behavior of surface rolled notch testpieces of a pearlitic ductile cast iron submitted to rotating bending fatigue tests.

  15. Ground Penetrating Radar (GPR) facies delineated shallow sedimentary records along a recently prograding coastal barrier adjoining the Bay of Bengal: Paradeep, Odisha, India

    Layek, M. K.; Sengupta, P.; Mukherjee, A.

    2017-12-01

    Sea-level fluctuations, triggered by progradation of beach or marine regression, can be of various time-scales. The fluctuating history of a shoreline along a coastal barrier can be identified from the sedimentary features of accretion or erosion. The necessity of the understanding of the complex barrier dynamics and subsurface along the Paradeep coast (in the state of Odisha, India), adjacent to the Bay of Bengal, has been growing since the number of the harbor industrial projects and the inhabitants of this major port city of India increases. In this study area, high resolution ground penetrating radar (GPR) survey and its interpretation by GPR facies analysis, which considers the pattern/set of reflected electromagnetic signals, has proved to be a useful method for shallow-subsurface (up to 8 m) imaging. In order to perform this task, a GPR system with 200 MHZ antenna was employed to survey along (17 profiles) and across (21 profiles) the microtidal coastal barrier of Paradeep. The shapes and sizes of the accretional and erosional features like beach-ridge deposits, washover deposits, channel-and-fill, and scour-and-fill are delineated on the radargram after processing by Radan7® software. The internal geometry of the beach ridge is mapped accurately after the radar facies analysis which suggests the longshore drift of sediments from the nearby river mouths of Mahanadi, Devi and their tributaries. This GPR facies analysis revealed the existence of two types of palaeo-tidal channels of the study area - (a) larger channels which are perpendicular to the shoreline having channel width of about 400 m with maximum depth of 4.5 m from the surface and (b) smaller channels (width up to 60 m) which flow parallel to the shoreline. In case of Paradeep coastal barrier, seaward-dipping beach progradational facies is positioned within oblique erosional surfaces (13°-36°) below the horizontal erosional surface or facies boundary. This lead to delineate the cycles of erosion

  16. Application of Musical Information Retrieval (MIR Techniques to Seismic Facies Classification. Examples in Hydrocarbon Exploration

    Paolo Dell’Aversana

    2016-12-01

    Full Text Available In this paper, we introduce a novel approach for automatic pattern recognition and classification of geophysical data based on digital music technology. We import and apply in the geophysical domain the same approaches commonly used for Musical Information Retrieval (MIR. After accurate conversion from geophysical formats (example: SEG-Y to musical formats (example: Musical Instrument Digital Interface, or briefly MIDI, we extract musical features from the converted data. These can be single-valued attributes, such as pitch and sound intensity, or multi-valued attributes, such as pitch histograms, melodic, harmonic and rhythmic paths. Using a real data set, we show that these musical features can be diagnostic for seismic facies classification in a complex exploration area. They can be complementary with respect to “conventional” seismic attributes. Using a supervised machine learning approach based on the k-Nearest Neighbors algorithm and on Automatic Neural Networks, we classify three gas-bearing channels. The good performance of our classification approach is confirmed by borehole data available in the same area.

  17. Applying circular economy innovation theory in business process modeling and analysis

    Popa, V.; Popa, L.

    2017-08-01

    The overall aim of this paper is to develop a new conceptual framework for business process modeling and analysis using circular economy innovative theory as a source for business knowledge management. The last part of the paper presents an author’s proposed basic structure for a new business models applying circular economy innovation theories. For people working on new innovative business models in the field of the circular economy this paper provides new ideas for clustering their concepts.

  18. Applied behavior analysis as intervention for autism: definition, features and philosophical concepts

    Síglia Pimentel Höher Camargo

    2013-11-01

    Full Text Available Autism spectrum disorder (ASD is a lifelong pervasive developmental disorder with no known causes and cure. However, educational and behavioral interventions with a foundation in applied behavior analysis (ABA have been shown to improve a variety of skill areas such as communication, social, academic, and adaptive behaviors of individuals with ASD. The goal of this work is to present the definition, features and philosophical concepts that underlie ABA and make this science an effective intervention method for people with autism.

  19. Assimilation of tourism satellite accounts and applied general equilibrium models to inform tourism policy analysis

    Rossouw, Riaan; Saayman, Melville

    2011-01-01

    Historically, tourism policy analysis in South Africa has posed challenges to accurate measurement. The primary reason for this is that tourism is not designated as an 'industry' in standard economic accounts. This paper therefore demonstrates the relevance and need for applied general equilibrium (AGE) models to be completed and extended through an integration with tourism satellite accounts (TSAs) as a tool for policy makers (especially tourism policy makers) in South Africa. The paper sets...

  20. Classical linear-control analysis applied to business-cycle dynamics and stability

    Wingrove, R. C.

    1983-01-01

    Linear control analysis is applied as an aid in understanding the fluctuations of business cycles in the past, and to examine monetary policies that might improve stabilization. The analysis shows how different policies change the frequency and damping of the economic system dynamics, and how they modify the amplitude of the fluctuations that are caused by random disturbances. Examples are used to show how policy feedbacks and policy lags can be incorporated, and how different monetary strategies for stabilization can be analytically compared. Representative numerical results are used to illustrate the main points.

  1. The Applied Behavior Analysis Research Paradigm and Single-Subject Designs in Adapted Physical Activity Research.

    Haegele, Justin A; Hodge, Samuel Russell

    2015-10-01

    There are basic philosophical and paradigmatic assumptions that guide scholarly research endeavors, including the methods used and the types of questions asked. Through this article, kinesiology faculty and students with interests in adapted physical activity are encouraged to understand the basic assumptions of applied behavior analysis (ABA) methodology for conducting, analyzing, and presenting research of high quality in this paradigm. The purposes of this viewpoint paper are to present information fundamental to understanding the assumptions undergirding research methodology in ABA, describe key aspects of single-subject research designs, and discuss common research designs and data-analysis strategies used in single-subject studies.

  2. Improving skill development: an exploratory study comparing a philosophical and an applied ethical analysis technique

    Al-Saggaf, Yeslam; Burmeister, Oliver K.

    2012-09-01

    This exploratory study compares and contrasts two types of critical thinking techniques; one is a philosophical and the other an applied ethical analysis technique. The two techniques analyse an ethically challenging situation involving ICT that a recent media article raised to demonstrate their ability to develop the ethical analysis skills of ICT students and professionals. In particular the skill development focused on includes: being able to recognise ethical challenges and formulate coherent responses; distancing oneself from subjective judgements; developing ethical literacy; identifying stakeholders; and communicating ethical decisions made, to name a few.

  3. On the use of the term 'frequency' in applied behavior analysis.

    Carr, James E; Nosik, Melissa R; Luke, Molli M

    2018-04-01

    There exists a terminological problem in applied behavior analysis: the term frequency has been used as a synonym for both rate (the number of responses per time) and count (the number of responses). To guide decisions about the use and meaning of frequency, we surveyed the usage of frequency in contemporary behavior-analytic journals and textbooks and found that the predominant usage of frequency was as count, not rate. Thus, we encourage behavior analysts to use frequency as a synonym for count. © 2018 Society for the Experimental Analysis of Behavior.

  4. The x-rays fluorescence applied to the analysis of alloys

    Gutierrez, D.A.

    1997-01-01

    This work is based on the utilization of the Fluorescence of X Rays. This technique of non destructive trial, has the purpose to establish a routine method, for the control of the conformation of industrial samples used. It makes an analysis with a combination of the algorithms of Rasberry-Heinrich and Claisse-Thinh. Besides, the numerical implementation of non usual techniques in this type of analysis. Such as the Linear Programming applied to the solution of super determined systems, of equations and the utilization of methods of relaxation to facilitate the convergence to the solutions. (author) [es

  5. Fatigue Analysis of Tubesheet/Shell Juncture Applying the Mitigation Factor for Over-conservatism

    Kang, Deog Ji; Kim, Kyu Hyoung; Lee, Jae Gon

    2009-01-01

    If the environmental fatigue requirements are applied to the primary components of a nuclear power plant, to which the present ASME Code fatigue curves are applied, some locations with high level CUF (Cumulative Usage Factor) are anticipated not to meet the code criteria. The application of environmental fatigue damage is still particularly controversial for plants with 60-year design lives. Therefore, it is need to develop a detailed fatigue analysis procedure to identify the conservatisms in the procedure and to lower the cumulative usage factor. Several factors are being considered to mitigate the conservatism such as three-dimensional finite element modeling. In the present analysis, actual pressure transient data instead of conservative maximum and minimum pressure data was applied as one of mitigation factors. Unlike in the general method, individual transient events were considered instead of the grouped transient events. The tubesheet/shell juncture in the steam generator assembly is the one of the weak locations and was, therefore, selected as a target to evaluate the mitigation factor in the present analysis

  6. System Sensitivity Analysis Applied to the Conceptual Design of a Dual-Fuel Rocket SSTO

    Olds, John R.

    1994-01-01

    This paper reports the results of initial efforts to apply the System Sensitivity Analysis (SSA) optimization method to the conceptual design of a single-stage-to-orbit (SSTO) launch vehicle. SSA is an efficient, calculus-based MDO technique for generating sensitivity derivatives in a highly multidisciplinary design environment. The method has been successfully applied to conceptual aircraft design and has been proven to have advantages over traditional direct optimization methods. The method is applied to the optimization of an advanced, piloted SSTO design similar to vehicles currently being analyzed by NASA as possible replacements for the Space Shuttle. Powered by a derivative of the Russian RD-701 rocket engine, the vehicle employs a combination of hydrocarbon, hydrogen, and oxygen propellants. Three primary disciplines are included in the design - propulsion, performance, and weights & sizing. A complete, converged vehicle analysis depends on the use of three standalone conceptual analysis computer codes. Efforts to minimize vehicle dry (empty) weight are reported in this paper. The problem consists of six system-level design variables and one system-level constraint. Using SSA in a 'manual' fashion to generate gradient information, six system-level iterations were performed from each of two different starting points. The results showed a good pattern of convergence for both starting points. A discussion of the advantages and disadvantages of the method, possible areas of improvement, and future work is included.

  7. Ongoing Analysis of Rocket Based Combined Cycle Engines by the Applied Fluid Dynamics Analysis Group at Marshall Space Flight Center

    Ruf, Joseph; Holt, James B.; Canabal, Francisco

    1999-01-01

    This paper presents the status of analyses on three Rocket Based Combined Cycle configurations underway in the Applied Fluid Dynamics Analysis Group (TD64). TD64 is performing computational fluid dynamics analysis on a Penn State RBCC test rig, the proposed Draco axisymmetric RBCC engine and the Trailblazer engine. The intent of the analysis on the Penn State test rig is to benchmark the Finite Difference Navier Stokes code for ejector mode fluid dynamics. The Draco engine analysis is a trade study to determine the ejector mode performance as a function of three engine design variables. The Trailblazer analysis is to evaluate the nozzle performance in scramjet mode. Results to date of each analysis are presented.

  8. PRO-ELICERE: A Hazard Analysis Automation Process Applied to Space Systems

    Tharcius Augusto Pivetta

    2016-07-01

    Full Text Available In the last decades, critical systems have increasingly been developed using computers and software even in space area, where the project approach is usually very conservative. In the projects of rockets, satellites and its facilities, like ground support systems, simulators, among other critical operations for the space mission, it must be applied a hazard analysis. The ELICERE process was created to perform a hazard analysis mainly over computer critical systems, in order to define or evaluate its safety and dependability requirements, strongly based on Hazards and Operability Study and Failure Mode and Effect Analysis techniques. It aims to improve the project design or understand the potential hazards of existing systems improving their functions related to functional or non-functional requirements. Then, the main goal of the ELICERE process is to ensure the safety and dependability goals of a space mission. The process, at the beginning, was created to operate manually in a gradual way. Nowadays, a software tool called PRO-ELICERE was developed, in such a way to facilitate the analysis process and store the results for reuse in another system analysis. To understand how ELICERE works and its tool, a small example of space study case was applied, based on a hypothetical rocket of the Cruzeiro do Sul family, developed by the Instituto de Aeronáutica e Espaço in Brazil.

  9. Sensitivity and uncertainty analysis applied to a repository in rock salt

    Polle, A.N.

    1996-12-01

    This document describes the sensitivity and uncertainty analysis with UNCSAM, as applied to a repository in rock salt for the EVEREST project. UNCSAM is a dedicated software package for sensitivity and uncertainty analysis, which was already used within the preceding PROSA project. The use of UNCSAM provides a flexible interface to EMOS ECN by substituting the sampled values in the various input files to be used by EMOS ECN ; the model calculations for this repository were performed with the EMOS ECN code. Preceding the sensitivity and uncertainty analysis, a number of preparations has been carried out to facilitate EMOS ECN with the probabilistic input data. For post-processing the EMOS ECN results, the characteristic output signals were processed. For the sensitivity and uncertainty analysis with UNCSAM the stochastic input, i.e. sampled values, and the output for the various EMOS ECN runs have been analyzed. (orig.)

  10. The evolution of applied harmonic analysis models of the real world

    Prestini, Elena

    2016-01-01

    A sweeping exploration of the development and far-reaching applications of harmonic analysis such as signal processing, digital music, optics, radio astronomy, crystallography, medical imaging, spectroscopy, and more. Featuring a wealth of illustrations, examples, and material not found in other harmonic analysis books, this unique monograph skillfully blends together historical narrative with scientific exposition to create a comprehensive yet accessible work. While only an understanding of calculus is required to appreciate it, there are more technical sections that will charm even specialists in harmonic analysis. From undergraduates to professional scientists, engineers, and mathematicians, there is something for everyone here. The second edition of The Evolution of Applied Harmonic Analysis contains a new chapter on atmospheric physics and climate change, making it more relevant for today’s audience. Praise for the first edition: "…can be thoroughly recommended to any reader who is curious about the ...

  11. Neutron activation analysis as applied to instrumental analysis of trace elements from seawater

    Boniforti, R.; Moauro, A.; Madaro, M.

    1983-01-01

    Particulate matter collected from the coastal area delimited by the mouth of the river Volturno and the Sabaudia lake has been analyzed by instrumental neutron activation analysis for its content of twenty-two trace elements. The results for surface water and bottom water are reported separately, thus evidencing the effect of sampling depth on the concentration of many elements. The necessity of accurately 'cleaning' the filters before use is stressed

  12. Can Link Analysis Be Applied to Identify Behavioral Patterns in Train Recorder Data?

    Strathie, Ailsa; Walker, Guy H

    2016-03-01

    A proof-of-concept analysis was conducted to establish whether link analysis could be applied to data from on-train recorders to detect patterns of behavior that could act as leading indicators of potential safety issues. On-train data recorders capture data about driving behavior on thousands of routine journeys every day and offer a source of untapped data that could be used to offer insights into human behavior. Data from 17 journeys undertaken by six drivers on the same route over a 16-hr period were analyzed using link analysis, and four key metrics were examined: number of links, network density, diameter, and sociometric status. The results established that link analysis can be usefully applied to data captured from on-vehicle recorders. The four metrics revealed key differences in normal driver behavior. These differences have promising construct validity as leading indicators. Link analysis is one method that could be usefully applied to exploit data routinely gathered by on-vehicle data recorders. It facilitates a proactive approach to safety based on leading indicators, offers a clearer understanding of what constitutes normal driving behavior, and identifies trends at the interface of people and systems, which is currently a key area of strategic risk. These research findings have direct applications in the field of transport data monitoring. They offer a means of automatically detecting patterns in driver behavior that could act as leading indicators of problems during operation and that could be used in the proactive monitoring of driver competence, risk management, and even infrastructure design. © 2015, Human Factors and Ergonomics Society.

  13. Criticality analysis of thermal reactors for two energy groups applying Monte Carlo and neutron Albedo method

    Terra, Andre Miguel Barge Pontes Torres

    2005-01-01

    The Albedo method applied to criticality calculations to nuclear reactors is characterized by following the neutron currents, allowing to make detailed analyses of the physics phenomena about interactions of the neutrons with the core-reflector set, by the determination of the probabilities of reflection, absorption, and transmission. Then, allowing to make detailed appreciations of the variation of the effective neutron multiplication factor, keff. In the present work, motivated for excellent results presented in dissertations applied to thermal reactors and shieldings, was described the methodology to Albedo method for the analysis criticality of thermal reactors by using two energy groups admitting variable core coefficients to each re-entrant current. By using the Monte Carlo KENO IV code was analyzed relation between the total fraction of neutrons absorbed in the core reactor and the fraction of neutrons that never have stayed into the reflector but were absorbed into the core. As parameters of comparison and analysis of the results obtained by the Albedo method were used one dimensional deterministic code ANISN (ANIsotropic SN transport code) and Diffusion method. The keff results determined by the Albedo method, to the type of analyzed reactor, showed excellent agreement. Thus were obtained relative errors of keff values smaller than 0,78% between the Albedo method and code ANISN. In relation to the Diffusion method were obtained errors smaller than 0,35%, showing the effectiveness of the Albedo method applied to criticality analysis. The easiness of application, simplicity and clarity of the Albedo method constitute a valuable instrument to neutronic calculations applied to nonmultiplying and multiplying media. (author)

  14. Dimensional analysis and extended hydrodynamic theory applied to long-rod penetration of ceramics

    J.D. Clayton

    2016-08-01

    Full Text Available Principles of dimensional analysis are applied in a new interpretation of penetration of ceramic targets subjected to hypervelocity impact. The analysis results in a power series representation – in terms of inverse velocity – of normalized depth of penetration that reduces to the hydrodynamic solution at high impact velocities. Specifically considered are test data from four literature sources involving penetration of confined thick ceramic targets by tungsten long rod projectiles. The ceramics are AD-995 alumina, aluminum nitride, silicon carbide, and boron carbide. Test data can be accurately represented by the linear form of the power series, whereby the same value of a single fitting parameter applies remarkably well for all four ceramics. Comparison of the present model with others in the literature (e.g., Tate's theory demonstrates a target resistance stress that depends on impact velocity, linearly in the limiting case. Comparison of the present analysis with recent research involving penetration of thin ceramic tiles at lower typical impact velocities confirms the importance of target properties related to fracture and shear strength at the Hugoniot Elastic Limit (HEL only in the latter. In contrast, in the former (i.e., hypervelocity and thick target experiments, the current analysis demonstrates dominant dependence of penetration depth only by target mass density. Such comparisons suggest transitions from microstructure-controlled to density-controlled penetration resistance with increasing impact velocity and ceramic target thickness.

  15. Statistical Techniques Applied to Aerial Radiometric Surveys (STAARS): cluster analysis. National Uranium Resource Evaluation

    Pirkle, F.L.; Stablein, N.K.; Howell, J.A.; Wecksung, G.W.; Duran, B.S.

    1982-11-01

    One objective of the aerial radiometric surveys flown as part of the US Department of Energy's National Uranium Resource Evaluation (NURE) program was to ascertain the regional distribution of near-surface radioelement abundances. Some method for identifying groups of observations with similar radioelement values was therefore required. It is shown in this report that cluster analysis can identify such groups even when no a priori knowledge of the geology of an area exists. A method of convergent k-means cluster analysis coupled with a hierarchical cluster analysis is used to classify 6991 observations (three radiometric variables at each observation location) from the Precambrian rocks of the Copper Mountain, Wyoming, area. Another method, one that combines a principal components analysis with a convergent k-means analysis, is applied to the same data. These two methods are compared with a convergent k-means analysis that utilizes available geologic knowledge. All three methods identify four clusters. Three of the clusters represent background values for the Precambrian rocks of the area, and one represents outliers (anomalously high 214 Bi). A segmentation of the data corresponding to geologic reality as discovered by other methods has been achieved based solely on analysis of aerial radiometric data. The techniques employed are composites of classical clustering methods designed to handle the special problems presented by large data sets. 20 figures, 7 tables

  16. Evidence for new resonances in the K-barN system: A prima facie case for the even-wave harmonic-oscillator model

    Kamath, S.G.

    1978-01-01

    Arguments are presented to show that the new resonance parameters obtained by Alston-Garnjost et al. in a recent analysis of the K-barN system from 365 to 1320 MeV/c provide a prima facie case for the even-wave harmonic-oscillator theory of baryonic states in the framework of SU(6)/sub W/ x O(3). A new quantum classification of the Λ states belonging to the (70,1 - ) is also proposed

  17. Simplified inelastic analysis methods applied to fast breeder reactor core design

    Abo-El-Ata, M.M.

    1978-01-01

    The paper starts with a review of some currently available simplified inelastic analysis methods used in elevated temperature design for evaluating plastic and thermal creep strains. The primary purpose of the paper is to investigate how these simplified methods may be applied to fast breeder reactor core design where neutron irradiation effects are significant. One of the problems discussed is irradiation-induced creep and its effect on shakedown, ratcheting, and plastic cycling. Another problem is the development of swelling-induced stress which is an additional loading mechanism and must be taken into account. In this respect an expression for swelling-induced stress in the presence of irradiation creep is derived and a model for simplifying the stress analysis under these conditions is proposed. As an example, the effects of irradiation creep and swelling induced stress on the analysis of a thin walled tube under constant internal pressure and intermittent heat fluxes, simulating a fuel pin, is presented

  18. Uncertainty and sensitivity analysis applied to coupled code calculations for a VVER plant transient

    Langenbuch, S.; Krzykacz-Hausmann, B.; Schmidt, K. D.

    2004-01-01

    The development of coupled codes, combining thermal-hydraulic system codes and 3D neutron kinetics, is an important step to perform best-estimate plant transient calculations. It is generally agreed that the application of best-estimate methods should be supplemented by an uncertainty and sensitivity analysis to quantify the uncertainty of the results. The paper presents results from the application of the GRS uncertainty and sensitivity method for a VVER-440 plant transient, which was already studied earlier for the validation of coupled codes. For this application, the main steps of the uncertainty method are described. Typical results of the method applied to the analysis of the plant transient by several working groups using different coupled codes are presented and discussed The results demonstrate the capability of an uncertainty and sensitivity analysis. (authors)

  19. An evaluation of an operating BWR piping system damping during earthquake by applying auto regressive analysis

    Kitada, Y.; Makiguchi, M.; Komori, A.; Ichiki, T.

    1985-01-01

    The records of three earthquakes which had induced significant earthquake response to the piping system were obtained with the earthquake observation system. In the present paper, first, the eigenvalue analysis results for the natural piping system based on the piping support (boundary) conditions are described and second, the frequency and the damping factor evaluation results for each vibrational mode are described. In the present study, the Auto Regressive (AR) analysis method is used in the evaluation of natural frequencies and damping factors. The AR analysis applied here has a capability of direct evaluation of natural frequencies and damping factors from earthquake records observed on a piping system without any information on the input motions to the system. (orig./HP)

  20. Applied Swarm-based medicine: collecting decision trees for patterns of algorithms analysis.

    Panje, Cédric M; Glatzer, Markus; von Rappard, Joscha; Rothermundt, Christian; Hundsberger, Thomas; Zumstein, Valentin; Plasswilm, Ludwig; Putora, Paul Martin

    2017-08-16

    The objective consensus methodology has recently been applied in consensus finding in several studies on medical decision-making among clinical experts or guidelines. The main advantages of this method are an automated analysis and comparison of treatment algorithms of the participating centers which can be performed anonymously. Based on the experience from completed consensus analyses, the main steps for the successful implementation of the objective consensus methodology were identified and discussed among the main investigators. The following steps for the successful collection and conversion of decision trees were identified and defined in detail: problem definition, population selection, draft input collection, tree conversion, criteria adaptation, problem re-evaluation, results distribution and refinement, tree finalisation, and analysis. This manuscript provides information on the main steps for successful collection of decision trees and summarizes important aspects at each point of the analysis.

  1. The fundamental parameter method applied to X-ray fluorescence analysis with synchrotron radiation

    Pantenburg, F. J.; Beier, T.; Hennrich, F.; Mommsen, H.

    1992-05-01

    Quantitative X-ray fluorescence analysis applying the fundamental parameter method is usually restricted to monochromatic excitation sources. It is shown here, that such analyses can be performed as well with a white synchrotron radiation spectrum. To determine absolute elemental concentration values it is necessary to know the spectral distribution of this spectrum. A newly designed and tested experimental setup, which uses the synchrotron radiation emitted from electrons in a bending magnet of ELSA (electron stretcher accelerator of the university of Bonn) is presented. The determination of the exciting spectrum, described by the given electron beam parameters, is limited due to uncertainties in the vertical electron beam size and divergence. We describe a method which allows us to determine the relative and absolute spectral distributions needed for accurate analysis. First test measurements of different alloys and standards of known composition demonstrate that it is possible to determine exact concentration values in bulk and trace element analysis.

  2. Mineralogical Characterization of The Alteration Facies at Gabal El-Missikat Area, Central Eastern Desert, Egypt

    El-Sherif, A.M.

    2013-01-01

    The present study deals with the petrographical, mineralogical and geochemical characteristics of the alteration facies zones recognized around the shear zone at Gabal El-Missikat area, Central Eastern Desert, Egypt. Petrographically, the fresh granitic samples are composed mainly of quartz, K-feldspars (microcline and microcline perthite), plagioclase, biotite. The secondary minerals are sericite, kaolinite, muscovite, chlorite and epidote as well as zircon, apatite, fluorite, titanite and iron oxides as accessory minerals. Two alteration facies zones are recognized and namely as propylitic and advanced argillic. The propylitic facies zone is composed mainly of sericite with minor kaolinite, muscovite, quartz, relics of plagioclases, chlorite and rare epidote as well as zircon, hematite, goethite, magnetite, ilmenite, ilmenorutile, rutile, titanite, apatite, columbite and fluorite and secondary uranium minerals, the advanced argillic facies zone is composed mainly of kaolinite with minor sericite, quartz, muscovite, chlorite and rare epidote as well as zircon, hematite, goethite, magnetite, ilmenite, ilmenorutile, rutile, titanite, apatite and garnet of spessartine type as accessory minerals. The identified minerals in the studied two alteration facies zones can be grouped into three mineral groups which are: the primary minerals (pyrite, magnetite, galena, columbite and gold), the secondary minerals (uranophane, kasolite and wulfenite) and the gangue minerals (anhydrite, barite, celestine, hematite, goethite and fluorite). The identified mineral assemblage of the studied propylitic alteration facies zone may be attributed to strongly alkaline hydrothermal solutions at ph value of more than 7 with temperature varying between 350 and 450°C, while the advanced argillic alteration facies zone is essentially associated with strongly acidic hydrothermal solutions at ph value less than 7 with temperature varying between 150 and 400°C

  3. The relationship between hydrogeologic properties and sedimentary facies: an example from Pennsylvanian bedrock aquifers, southwestern Indiana

    Fisher, A.T.; Barnhill, M.; Revenaugh, J.

    1998-01-01

    The relationship between the hydrogeologic properties and sedimentary facies of shallow Pennsylvanian bedrock aquifers was examined using detailed sedimentologic descriptions, aquifer (slug) tests, and gamma ray logs. The main goal of the study was to determine if it was possible to reliably estimate near-well hydraulic conductivities using core descriptions and logging data at a complex field site, based on assignment of consistent conductivity indicators to individual facies. Lithologic information was gathered from three sources: core descriptions, simplified lithologic columns derived from the core descriptions, and drillers' logs. Gamma ray data were collected with a conventional logging instrument. Slug tests were conducted in all wells containing screened zones entirely within the Pennsylvanian facies of interest. Simplified subsets of sedimentologic facies were assembled for classification of subsurface geology, and all rocks within the screened intervals of test wells were assigned to individual facies based on visual descriptions. Slug tests were conducted to determine the bulk hydraulic conductivity (a spatial average within the screened interval) in the immediate vicinity of the wells, with measured values varying from 10 -4 m/s to 10 -8 m/s. Gamma ray logs from these wells revealed variations in raw counts above about 1.5 orders of magnitude. Data were combined using simple linear and nonlinear inverse techniques to derive relations between sedimentologic facies, gamma ray signals, and bulk hydraulic conductivities. The analyses suggest that facies data alone, even those derived from detailed core descriptions, are insufficient for estimating hydraulic conductivity in this setting to better than an order of magnitude. The addition of gamma ray data improved the estimates, as did selective filtering of several extreme values from the full data set. Better estimates might be obtained through more careful field measurements and reduction of

  4. Age and duration of eclogite-facies metamorphism, North Qaidam HP/UHP terrane, Western China

    Mattinson, C.G.; Wooden, J.L.; Liou, J.G.; Bird, D.K.; Wu, C.L.

    2006-01-01

    Amphibolite-facies para-and orthogneisses near Dulan, at the southeast end of the North Qaidam terrane, enclose minor eclogite and peridotite which record ultra-high pressure (UHP) metamorphism associated with the Early Paleozoic continental collision of the Qilian and Qaidam microplates. Field relations and coesite inclusions in zircons from paragneiss suggest that felsic, mafic, and ultramafic rocks all experienced UHP metamorphism and a common amphibolite-facies retrogression. SHRIMP-RG U-Pb and REE analyses of zircons from four eclogites yield weighted mean ages of 449 to 422 Ma, and REE patterns (flat HREE, no Eu anomaly) and inclusions of garnet, omphacite, and rutile indicate these ages record eclogite-facies metamorphism. The coherent field relations of these samples, and the similar range of individual ages in each sample suggests that the ???25 m.y. age range reflects the duration of eclogite-facies conditions in the studied samples. Analyses from zircon cores in one sample yield scattered 433 to 474 Ma ages, reflecting partial overlap on rims, and constrain the minimum age of eclogite protolith crystallization. Inclusions of Th + REE-rich epidote, and zircon REE patterns are consistent with prograde metamorphic growth. In the Lu??liang Shan, approximately 350 km northwest in the North Qaidam terrane, ages interpreted to record eclogite-facies metamorphism of eclogite and garnet peridotite are as old as 495 Ma and as young as 414 Ma, which suggests that processes responsible for extended high-pressure residence are not restricted to the Dulan region. Evidence of prolonged eclogite-facies metamorphism in HP/UHP localities in the Northeast Greenland eclogite province, the Western Gneiss Region of Norway, and the western Alps suggests that long eclogite-facies residence may be globally significant in continental subduction/collision zones.

  5. Applied statistical training to strengthen analysis and health research capacity in Rwanda.

    Thomson, Dana R; Semakula, Muhammed; Hirschhorn, Lisa R; Murray, Megan; Ndahindwa, Vedaste; Manzi, Anatole; Mukabutera, Assumpta; Karema, Corine; Condo, Jeanine; Hedt-Gauthier, Bethany

    2016-09-29

    To guide efficient investment of limited health resources in sub-Saharan Africa, local researchers need to be involved in, and guide, health system and policy research. While extensive survey and census data are available to health researchers and program officers in resource-limited countries, local involvement and leadership in research is limited due to inadequate experience, lack of dedicated research time and weak interagency connections, among other challenges. Many research-strengthening initiatives host prolonged fellowships out-of-country, yet their approaches have not been evaluated for effectiveness in involvement and development of local leadership in research. We developed, implemented and evaluated a multi-month, deliverable-driven, survey analysis training based in Rwanda to strengthen skills of five local research leaders, 15 statisticians, and a PhD candidate. Research leaders applied with a specific research question relevant to country challenges and committed to leading an analysis to publication. Statisticians with prerequisite statistical training and experience with a statistical software applied to participate in class-based trainings and complete an assigned analysis. Both statisticians and research leaders were provided ongoing in-country mentoring for analysis and manuscript writing. Participants reported a high level of skill, knowledge and collaborator development from class-based trainings and out-of-class mentorship that were sustained 1 year later. Five of six manuscripts were authored by multi-institution teams and submitted to international peer-reviewed scientific journals, and three-quarters of the participants mentored others in survey data analysis or conducted an additional survey analysis in the year following the training. Our model was effective in utilizing existing survey data and strengthening skills among full-time working professionals without disrupting ongoing work commitments and using few resources. Critical to our

  6. Applied Behavior Analysis, Autism, and Occupational Therapy: A Search for Understanding.

    Welch, Christie D; Polatajko, H J

    2016-01-01

    Occupational therapists strive to be mindful, competent practitioners and continuously look for ways to improve practice. Applied behavior analysis (ABA) has strong evidence of effectiveness in helping people with autism achieve goals, yet it does not seem to be implemented in occupational therapy practice. To better understand whether ABA could be an evidence-based option to expand occupational therapy practice, the authors conducted an iterative, multiphase investigation of relevant literature. Findings suggest that occupational therapists apply developmental and sensory approaches to autism treatment. The occupational therapy literature does not reflect any use of ABA despite its strong evidence base. Occupational therapists may currently avoid using ABA principles because of a perception that ABA is not client centered. ABA principles and occupational therapy are compatible, and the two could work synergistically. Copyright © 2016 by the American Occupational Therapy Association, Inc.

  7. Multivariat least-squares methods applied to the quantitative spectral analysis of multicomponent samples

    Haaland, D.M.; Easterling, R.G.; Vopicka, D.A.

    1985-01-01

    In an extension of earlier work, weighted multivariate least-squares methods of quantitative FT-IR analysis have been developed. A linear least-squares approximation to nonlinearities in the Beer-Lambert law is made by allowing the reference spectra to be a set of known mixtures, The incorporation of nonzero intercepts in the relation between absorbance and concentration further improves the approximation of nonlinearities while simultaneously accounting for nonzero spectra baselines. Pathlength variations are also accommodated in the analysis, and under certain conditions, unknown sample pathlengths can be determined. All spectral data are used to improve the precision and accuracy of the estimated concentrations. During the calibration phase of the analysis, pure component spectra are estimated from the standard mixture spectra. These can be compared with the measured pure component spectra to determine which vibrations experience nonlinear behavior. In the predictive phase of the analysis, the calculated spectra are used in our previous least-squares analysis to estimate sample component concentrations. These methods were applied to the analysis of the IR spectra of binary mixtures of esters. Even with severely overlapping spectral bands and nonlinearities in the Beer-Lambert law, the average relative error in the estimated concentration was <1%

  8. Analysis of the Nevada-Applied-Ecology-Group model of transuranic radionuclide transport and dose

    Kercher, J.R.; Anspaugh, L.R.

    1991-01-01

    The authors analyze the model for estimating the dose from 239 Pu developed for the Nevada Applied Ecology Group (NAEG) by using sensitivity analysis and uncertainty analysis. Sensitivity analysis results suggest that the inhalation pathway is the critical pathway for the organs receiving the highest dose. Soil concentration and the factors controlling air concentration are the most important parameters. The only organ whose dose is sensitive to parameters in the ingestion pathway is the GI tract. The inhalation pathway accounts for 100% of the dose to lung, upper respiratory tract and thoracic lymph nodes; and 95% of the dose to liver, bone, kidney and total body. The GI tract receives 99% of its dose via ingestion. Leafy vegetable ingestion accounts for 70% of the dose from the ingestion pathway regardless of organ, peeled vegetables 20%; accidental soil ingestion 5% ingestion of beef liver 4%; beef muscle 1%. Uncertainty analysis indicates that choosing a uniform distribution for the input parameters produces a lognormal distribution of the dose. The ratio of the square root of the variance to the mean is three times greater for the doses than it is for the individual parameters. As found by the sensitivity analysis, the uncertainty analysis suggests that only a few parameters control the dose for each organ. All organs have similar distributions and variance to mean ratios except for the lymph nodes. (author)

  9. Sedimentología y petrología de los abanicos aluviales y facies adyacentes en el Neogeno de Paracuellos de Jarama (Madrid

    Alonso, M.

    1986-06-01

    Full Text Available Lateral and vertical variations of middle Miocene lithofacies (Lower and Intermediate Units of the Miocene of the Madrid Basin have been analyzed in the Paracuellos de Jarama area, near Madrid. A complete transition from medial to distal alluvial fan facies and palustrinelshaltow 1acustrine deposits can be observed. This sedimentary evolution is inferred from the detailed sedimentological. analysis carried out in each of the previously defined lithostratigraphic units: a1 Green shale and dolomite Unit, a2 Brown clays, arkosic and carbonate Unit; these two units are linked together into a Lower Group. b Coarse Arkosic Unit (Upper Group. Facies relationsbips within the Lower Group show a lateral change pattern between alluvial fan deposits, and palustrine deposits. Also the former ones gradually prograde over the palustrine deposits, as deduced from vertical evolution in the southernmost parts of the area. Upper Group represents a sudden progradation of the alluvial fan systems, that extensively overlie the distal facies observed in the Lower Group.
    Wide development of calcretes, sepiolite deposits, and nodular chert is an outstanding feature in the most distal parts of the alluvial fan bodies. They are studied in some detail provided the scarcity of well described examples of facies relationships in the kinds of deposits.

    Se estudia en este trabajo la variación lateral y vertical de las litofacies del Mioceno medio (Unidades Inferior e Intermedia en el área de Paracuellos de Jarama, próxima a Madrid, quedando representada en este área una transición completa entre depósitos de facies medias de abenícos aluviales y depósitos de ámbitos palustres. Estas conclusiones se extraen a partir del análisis sedimentológico realizado en cada una de las unidades previamente definidas: a Unidad de arcillas verdes y carbonatos y Unidad de arcillas pardas, arcillas y carbonatos en el Conjunto Inferior; b Unidad de

  10. IAEA-ASSET's root cause analysis method applied to sodium leakage incident at Monju

    Watanabe, Norio; Hirano, Masashi

    1997-08-01

    The present study applied the ASSET (Analysis and Screening of Safety Events Team) methodology (This method identifies occurrences such as component failures and operator errors, identifies their respective direct/root causes and determines corrective actions.) to the analysis of the sodium leakage incident at Monju, based on the published reports by mainly the Science and Technology Agency, aiming at systematic identification of direct/root causes and corrective actions, and discussed the effectiveness and problems of the ASSET methodology. The results revealed the following seven occurrences and showed the direct/root causes and contributing factors for the individual occurrences: failure of thermometer well tube, delayed reactor manual trip, inadequate continuous monitoring of leakage, misjudgment of leak rate, non-required operator action (turbine trip), retarded emergency sodium drainage, and retarded securing of ventilation system. Most of the occurrences stemmed from deficiencies in emergency operating procedures (EOPs), which were mainly caused by defects in the EOP preparation process and operator training programs. The corrective actions already proposed in the published reports were reviewed, identifying issues to be further studied. Possible corrective actions were discussed for these issues. The present study also demonstrated the effectiveness of the ASSET methodology and pointed out some problems, for example, in delineating causal relations among occurrences, for applying it to the detail and systematic analysis of event direct/root causes and determination of concrete measures. (J.P.N.)

  11. IAEA-ASSET`s root cause analysis method applied to sodium leakage incident at Monju

    Watanabe, Norio; Hirano, Masashi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1997-08-01

    The present study applied the ASSET (Analysis and Screening of Safety Events Team) methodology (This method identifies occurrences such as component failures and operator errors, identifies their respective direct/root causes and determines corrective actions.) to the analysis of the sodium leakage incident at Monju, based on the published reports by mainly the Science and Technology Agency, aiming at systematic identification of direct/root causes and corrective actions, and discussed the effectiveness and problems of the ASSET methodology. The results revealed the following seven occurrences and showed the direct/root causes and contributing factors for the individual occurrences: failure of thermometer well tube, delayed reactor manual trip, inadequate continuous monitoring of leakage, misjudgment of leak rate, non-required operator action (turbine trip), retarded emergency sodium drainage, and retarded securing of ventilation system. Most of the occurrences stemmed from deficiencies in emergency operating procedures (EOPs), which were mainly caused by defects in the EOP preparation process and operator training programs. The corrective actions already proposed in the published reports were reviewed, identifying issues to be further studied. Possible corrective actions were discussed for these issues. The present study also demonstrated the effectiveness of the ASSET methodology and pointed out some problems, for example, in delineating causal relations among occurrences, for applying it to the detail and systematic analysis of event direct/root causes and determination of concrete measures. (J.P.N.)

  12. Mesozoic Alpine facies deposition as a result of past latitudinal plate motion.

    Muttoni, Giovanni; Erba, Elisabetta; Kent, Dennis V; Bachtadse, Valerian

    2005-03-03

    The fragmentation of Pangaea as a consequence of the opening of the Atlantic Ocean is documented in the Alpine-Mediterranean region by the onset of widespread pelagic sedimentation. Shallow-water sediments were replaced by mainly pelagic limestones in the Early Jurassic period, radiolarian cherts in the Middle-Late Jurassic period, and again pelagic limestones in the Late Jurassic-Cretaceous period. During initial extension, basin subsidence below the carbonate compensation depth (CCD) is thought to have triggered the transition from Early Jurassic limestones to Middle-Late Jurassic radiolarites. It has been proposed that the transition from radiolarites to limestones in the Late Jurassic period was due to an increase in calcareous nannoplankton abundance when the CCD was depressed below the ocean floor. But in modern oceans, sediments below the CCD are not necessarily radiolaritic. Here we present palaeomagnetic samples from the Jurassic-Cretaceous pelagic succession exposed in the Lombardian basin, Italy. On the basis of an analysis of our palaeolatitudinal data in a broader palaeogeographic context, we propose an alternative explanation for the above facies tripartition. We suggest that the Lombardian basin drifted initially towards, and subsequently away from, a near-equatorial upwelling zone of high biosiliceous productivity. Our tectonic model for the genesis of radiolarites adds an essential horizontal plate motion component to explanations involving only vertical variations of CCD relative to the ocean floor. It may explain the deposition of radiolarites throughout the Mediterranean and Middle Eastern region during the Jurassic period.

  13. Applying HAZOP analysis in assessing remote handling compatibility of ITER port plugs

    Duisings, L.P.M.; Til, S. van; Magielsen, A.J.; Ronden, D.M.S.; Elzendoorn, B.S.Q.; Heemskerk, C.J.M.

    2013-01-01

    Highlights: ► We applied HAZOP analysis to assess the criticality of remote handling maintenance activities on port plugs in the ITER Hot Cell facility. ► We identified several weak points in the general upper port plug maintenance concept. ► We made clear recommendations on redesign in port plug design, operational sequence and Hot Cell equipment. ► The use of a HAZOP approach for the ECH UL port can also be applied to ITER port plugs in general. -- Abstract: This paper describes the application of a Hazard and Operability Analysis (HAZOP) methodology in assessing the criticality of remote handling maintenance activities on port plugs in the ITER Hot Cell facility. As part of the ECHUL consortium, the remote handling team at the DIFFER Institute is developing maintenance tools and procedures for critical components of the ECH Upper launcher (UL). Based on NRG's experience with nuclear risk analysis and Hot Cell procedures, early versions of these tool concepts and maintenance procedures were subjected to a HAZOP analysis. The analysis identified several weak points in the general upper port plug maintenance concept and led to clear recommendations on redesigns in port plug design, the operational sequence and ITER Hot Cell equipment. The paper describes the HAZOP methodology and illustrates its application with specific procedures: the Steering Mirror Assembly (SMA) replacement and the exchange of the Mid Shield Optics (MSO) in the ECH UPL. A selection of recommended changes to the launcher design associated with the accessibility, maintainability and manageability of replaceable components are presented

  14. A comparative analysis of three metaheuristic methods applied to fuzzy cognitive maps learning

    Bruno A. Angélico

    2013-12-01

    Full Text Available This work analyses the performance of three different population-based metaheuristic approaches applied to Fuzzy cognitive maps (FCM learning in qualitative control of processes. Fuzzy cognitive maps permit to include the previous specialist knowledge in the control rule. Particularly, Particle Swarm Optimization (PSO, Genetic Algorithm (GA and an Ant Colony Optimization (ACO are considered for obtaining appropriate weight matrices for learning the FCM. A statistical convergence analysis within 10000 simulations of each algorithm is presented. In order to validate the proposed approach, two industrial control process problems previously described in the literature are considered in this work.

  15. A risk analysis approach applied to field surveillance in utility meters in legal metrology

    Rodrigues Filho, B. A.; Nonato, N. S.; Carvalho, A. D.

    2018-03-01

    Field surveillance represents the level of control in metrological supervision responsible for checking the conformity of measuring instruments in-service. Utility meters represent the majority of measuring instruments produced by notified bodies due to self-verification in Brazil. They play a major role in the economy once electricity, gas and water are the main inputs to industries in their production processes. Then, to optimize the resources allocated to control these devices, the present study applied a risk analysis in order to identify among the 11 manufacturers notified to self-verification, the instruments that demand field surveillance.

  16. Feasibility evaluation of two solar cooling systems applied to a cuban hotel. Comparative analysis

    Díaz Torres, Yamile; Valdivia Nodal, Yarelis; Monteagudo Yanes, José Pedro; Miranda Torres, Yudit

    2016-01-01

    The article presents an analysis of technical and economic feasibility of using two configurations of solar cooling in a Cuban hotel. HVAC hybrid schemes are: a cooler of ice water vapor compression (chiller) interconnected in parallel with a smaller capacity chiller, first with a solar-powered absorption cooling system (SACS), and then with a photovoltaic cooling system(PSC). Both were simulated taking into account the weather conditions in the region, thermodynamic calculation methodologies and principles that govern these technologies. The results show that the use of these alternatives contributes to reducing energy consumption and the environmental impact of heating, ventilation and air conditioning systems (HVAC). Economic analysis highlights that PCS is more favorable than the SACS taking into account the cooling cost generation (CCG) but energy assessment indicates that SACS has higher thermal performance for the case study to which it is applied. (author)

  17. Applying reliability analysis to design electric power systems for More-electric aircraft

    Zhang, Baozhu

    The More-Electric Aircraft (MEA) is a type of aircraft that replaces conventional hydraulic and pneumatic systems with electrically powered components. These changes have significantly challenged the aircraft electric power system design. This thesis investigates how reliability analysis can be applied to automatically generate system topologies for the MEA electric power system. We first use a traditional method of reliability block diagrams to analyze the reliability level on different system topologies. We next propose a new methodology in which system topologies, constrained by a set reliability level, are automatically generated. The path-set method is used for analysis. Finally, we interface these sets of system topologies with control synthesis tools to automatically create correct-by-construction control logic for the electric power system.

  18. An Appraisal of Social Network Theory and Analysis as Applied to Public Health: Challenges and Opportunities.

    Valente, Thomas W; Pitts, Stephanie R

    2017-03-20

    The use of social network theory and analysis methods as applied to public health has expanded greatly in the past decade, yielding a significant academic literature that spans almost every conceivable health issue. This review identifies several important theoretical challenges that confront the field but also provides opportunities for new research. These challenges include (a) measuring network influences, (b) identifying appropriate influence mechanisms, (c) the impact of social media and computerized communications, (d) the role of networks in evaluating public health interventions, and (e) ethics. Next steps for the field are outlined and the need for funding is emphasized. Recently developed network analysis techniques, technological innovations in communication, and changes in theoretical perspectives to include a focus on social and environmental behavioral influences have created opportunities for new theory and ever broader application of social networks to public health topics.

  19. Escalation research: Providing new frontiers for applying behavior analysis to organizational behavior

    Goltz, Sonia M.

    2000-01-01

    Decision fiascoes such as escalation of commitment, the tendency of decision makers to “throw good money after bad,” can have serious consequences for organizations and are therefore of great interest in applied research. This paper discusses the use of behavior analysis in organizational behavior research on escalation. Among the most significant aspects of behavior-analytic research on escalation is that it has indicated that both the patterns of outcomes that decision makers have experienced for past decisions and the patterns of responses that they make are critical for understanding escalation. This research has also stimulated the refinement of methods by researchers to better assess decision making and the role reinforcement plays in it. Finally, behavior-analytic escalation research has not only indicated the utility of reinforcement principles for predicting more complex human behavior but has also suggested some additional areas for future exploration of decision making using behavior analysis. PMID:22478347

  20. Digital image analysis applied to industrial nondestructive evaluation and automated parts assembly

    Janney, D.H.; Kruger, R.P.

    1979-01-01

    Many ideas of image enhancement and analysis are relevant to the needs of the nondestructive testing engineer. These ideas not only aid the engineer in the performance of his current responsibilities, they also open to him new areas of industrial development and automation which are logical extensions of classical testing problems. The paper begins with a tutorial on the fundamentals of computerized image enhancement as applied to nondestructive testing, then progresses through pattern recognition and automated inspection to automated, or robotic, assembly procedures. It is believed that such procedures are cost-effective in many instances, and are but the logical extension of those techniques now commonly used, but often limited to analysis of data from quality-assurance images. Many references are given in order to help the reader who wishes to pursue a given idea further

  1. Selection of Forklift Unit for Warehouse Operation by Applying Multi-Criteria Analysis

    Predrag Atanasković

    2013-07-01

    Full Text Available This paper presents research related to the choice of the criteria that can be used to perform an optimal selection of the forklift unit for warehouse operation. The analysis has been done with the aim of exploring the requirements and defining relevant criteria that are important when investment decision is made for forklift procurement, and based on the conducted research by applying multi-criteria analysis, to determine the appropriate parameters and their relative weights that form the input data and database for selection of the optimal handling unit. This paper presents an example of choosing the optimal forklift based on the selected criteria for the purpose of making the relevant investment decision.

  2. Functional analysis and applied optimization in Banach spaces applications to non-convex variational models

    Botelho, Fabio

    2014-01-01

    This book introduces the basic concepts of real and functional analysis. It presents the fundamentals of the calculus of variations, convex analysis, duality, and optimization that are necessary to develop applications to physics and engineering problems. The book includes introductory and advanced concepts in measure and integration, as well as an introduction to Sobolev spaces. The problems presented are nonlinear, with non-convex variational formulation. Notably, the primal global minima may not be attained in some situations, in which cases the solution of the dual problem corresponds to an appropriate weak cluster point of minimizing sequences for the primal one. Indeed, the dual approach more readily facilitates numerical computations for some of the selected models. While intended primarily for applied mathematicians, the text will also be of interest to engineers, physicists, and other researchers in related fields.

  3. Analysis of the concept of nursing educational technology applied to the patient

    Aline Cruz Esmeraldo Áfio

    2014-04-01

    Full Text Available It is aimed at analyzing the concept of educational technology, produced by nursing, applied to the patient. Rodgers´ Evolutionary Method of Concept Analysis was used, identifying background, attributes and consequential damages. 13 articles were selected for analysis in which the background was identified: knowledge deficiency, shortage of nursing professionals' time, to optimize nursing work, the need to achieve the goals of the patients. Attributes: tool, strategy, innovative approach, pedagogical approach, mediator of knowledge, creative way to encourage the acquisition of skills, health production instrument. Consequences: to improve the quality of life, encouraging healthy behavior, empowerment, reflection and link. It emphasizes the importance of educational technologies for the care in nursing, to boost health education activities.

  4. DATE analysis: A general theory of biological change applied to microarray data.

    Rasnick, David

    2009-01-01

    In contrast to conventional data mining, which searches for specific subsets of genes (extensive variables) to correlate with specific phenotypes, DATE analysis correlates intensive state variables calculated from the same datasets. At the heart of DATE analysis are two biological equations of state not dependent on genetic pathways. This result distinguishes DATE analysis from other bioinformatics approaches. The dimensionless state variable F quantifies the relative overall cellular activity of test cells compared to well-chosen reference cells. The variable pi(i) is the fold-change in the expression of the ith gene of test cells relative to reference. It is the fraction phi of the genome undergoing differential expression-not the magnitude pi-that controls biological change. The state variable phi is equivalent to the control strength of metabolic control analysis. For tractability, DATE analysis assumes a linear system of enzyme-connected networks and exploits the small average contribution of each cellular component. This approach was validated by reproducible values of the state variables F, RNA index, and phi calculated from random subsets of transcript microarray data. Using published microarray data, F, RNA index, and phi were correlated with: (1) the blood-feeding cycle of the malaria parasite, (2) embryonic development of the fruit fly, (3) temperature adaptation of Killifish, (4) exponential growth of cultured S. pneumoniae, and (5) human cancers. DATE analysis was applied to aCGH data from the great apes. A good example of the power of DATE analysis is its application to genomically unstable cancers, which have been refractory to data mining strategies. 2009 American Institute of Chemical Engineers Biotechnol.

  5. Adding value in oil and gas by applying decision analysis methodologies: case history

    Marot, Nicolas [Petro Andina Resources Inc., Alberta (Canada); Francese, Gaston [Tandem Decision Solutions, Buenos Aires (Argentina)

    2008-07-01

    Petro Andina Resources Ltd. together with Tandem Decision Solutions developed a strategic long range plan applying decision analysis methodology. The objective was to build a robust and fully integrated strategic plan that accomplishes company growth goals to set the strategic directions for the long range. The stochastic methodology and the Integrated Decision Management (IDM{sup TM}) staged approach allowed the company to visualize the associated value and risk of the different strategies while achieving organizational alignment, clarity of action and confidence in the path forward. A decision team involving jointly PAR representatives and Tandem consultants was established to carry out this four month project. Discovery and framing sessions allow the team to disrupt the status quo, discuss near and far reaching ideas and gather the building blocks from which creative strategic alternatives were developed. A comprehensive stochastic valuation model was developed to assess the potential value of each strategy applying simulation tools, sensitivity analysis tools and contingency planning techniques. Final insights and results have been used to populate the final strategic plan presented to the company board providing confidence to the team, assuring that the work embodies the best available ideas, data and expertise, and that the proposed strategy was ready to be elaborated into an optimized course of action. (author)

  6. TRICARE Applied Behavior Analysis (ABA) Benefit: Comparison with Medicaid and Commercial Benefits.

    Maglione, Margaret; Kadiyala, Srikanth; Kress, Amii; Hastings, Jaime L; O'Hanlon, Claire E

    2017-01-01

    This study compared the Applied Behavior Analysis (ABA) benefit provided by TRICARE as an early intervention for autism spectrum disorder with similar benefits in Medicaid and commercial health insurance plans. The sponsor, the Office of the Under Secretary of Defense for Personnel and Readiness, was particularly interested in how a proposed TRICARE reimbursement rate decrease from $125 per hour to $68 per hour for ABA services performed by a Board Certified Behavior Analyst compared with reimbursement rates (defined as third-party payment to the service provider) in Medicaid and commercial health insurance plans. Information on ABA coverage in state Medicaid programs was collected from Medicaid state waiver databases; subsequently, Medicaid provider reimbursement data were collected from state Medicaid fee schedules. Applied Behavior Analysis provider reimbursement in the commercial health insurance system was estimated using Truven Health MarketScan® data. A weighted mean U.S. reimbursement rate was calculated for several services using cross-state information on the number of children diagnosed with autism spectrum disorder. Locations of potential provider shortages were also identified. Medicaid and commercial insurance reimbursement rates varied considerably across the United States. This project concluded that the proposed $68-per-hour reimbursement rate for services provided by a board certified analyst was more than 25 percent below the U.S. mean.

  7. Topological data analysis (TDA) applied to reveal pedogenetic principles of European topsoil system.

    Savic, Aleksandar; Toth, Gergely; Duponchel, Ludovic

    2017-05-15

    Recent developments in applied mathematics are bringing new tools that are capable to synthesize knowledge in various disciplines, and help in finding hidden relationships between variables. One such technique is topological data analysis (TDA), a fusion of classical exploration techniques such as principal component analysis (PCA), and a topological point of view applied to clustering of results. Various phenomena have already received new interpretations thanks to TDA, from the proper choice of sport teams to cancer treatments. For the first time, this technique has been applied in soil science, to show the interaction between physical and chemical soil attributes and main soil-forming factors, such as climate and land use. The topsoil data set of the Land Use/Land Cover Area Frame survey (LUCAS) was used as a comprehensive database that consists of approximately 20,000 samples, each described by 12 physical and chemical parameters. After the application of TDA, results obtained were cross-checked against known grouping parameters including five types of land cover, nine types of climate and the organic carbon content of soil. Some of the grouping characteristics observed using standard approaches were confirmed by TDA (e.g., organic carbon content) but novel subtle relationships (e.g., magnitude of anthropogenic effect in soil formation), were discovered as well. The importance of this finding is that TDA is a unique mathematical technique capable of extracting complex relations hidden in soil science data sets, giving the opportunity to see the influence of physicochemical, biotic and abiotic factors on topsoil formation through fresh eyes. Copyright © 2017 Elsevier B.V. All rights reserved.

  8. Clinical usefulness of the clock drawing test applying rasch analysis in predicting of cognitive impairment.

    Yoo, Doo Han; Lee, Jae Shin

    2016-07-01

    [Purpose] This study examined the clinical usefulness of the clock drawing test applying Rasch analysis for predicting the level of cognitive impairment. [Subjects and Methods] A total of 187 stroke patients with cognitive impairment were enrolled in this study. The 187 patients were evaluated by the clock drawing test developed through Rasch analysis along with the mini-mental state examination of cognitive evaluation tool. An analysis of the variance was performed to examine the significance of the mini-mental state examination and the clock drawing test according to the general characteristics of the subjects. Receiver operating characteristic analysis was performed to determine the cutoff point for cognitive impairment and to calculate the sensitivity and specificity values. [Results] The results of comparison of the clock drawing test with the mini-mental state showed significant differences in according to gender, age, education, and affected side. A total CDT of 10.5, which was selected as the cutoff point to identify cognitive impairement, showed a sensitivity, specificity, Youden index, positive predictive, and negative predicive values of 86.4%, 91.5%, 0.8, 95%, and 88.2%. [Conclusion] The clock drawing test is believed to be useful in assessments and interventions based on its excellent ability to identify cognitive disorders.

  9. The Investigation of NPP Control and Monitoring Functional Analysis Applied to Functional Displays’ Implementation

    Yan, J.

    2015-01-01

    NPP Control and Monitoring System has been recognised as extreme and safe as well as large scale product, thus it was one of the most major design activities that fully, accurately and operationally functional analysis. The results of functional analysis would be employed as initial instruction through the whole lifecycle of NPP Control and Monitoring System. In this paper, it was discovered that several disadvantages of present functional analysis methods included FAST, The Subtract and Operate Procedure and Functional Procedure Method; owing to the identity methods enveloped here was the combination of Functional Tree and System Structure, as well as its decomposition steps; and RCS Inventory Control function which is defined as one of the most significant control functions in Advanced Light Water Reactor Utility Requirement Document has been employed to demonstrate the feasibility of this method; the analysis results of RCS Inventory function has been applied to direct the design and implementation of related displays, here the functional display of RCS Inventory Control function has been implemented on NuCON which is originated by SNPAS. Owing to the analyzing results, it would be ensured that the accuracy of information displayed to operators, thus the operator would be aware the condition of systems and then make the proper move to ensure the safety and productivity of NPP based on the received data. (author)

  10. Cloud Computing and Internet of Things Concepts Applied on Buildings Data Analysis

    Hebean Florin-Adrian

    2017-12-01

    Full Text Available Used and developed initially for the IT industry, the Cloud computing and Internet of Things concepts are found at this moment in a lot of sectors of activity, building industry being one of them. These are defined like a global computing, monitoring and analyze network, which is composed of hardware and software resources, with the feature of allocating and dynamically relocating the shared resources, in accordance with user requirements. Data analysis and process optimization techniques based on these new concepts are used increasingly more in the buildings industry area, especially for an optimal operations of the buildings installations and also for increasing occupants comfort. The multitude of building data taken from HVAC sensor, from automation and control systems and from the other systems connected to the network are optimally managed by these new analysis techniques. Through analysis techniques can be identified and manage the issues the arise in operation of building installations like critical alarms, nonfunctional equipment, issues regarding the occupants comfort, for example the upper and lower temperature deviation to the set point and other issues related to equipment maintenance. In this study, a new approach regarding building control is presented and also a generalized methodology for applying data analysis to building services data is described. This methodology is then demonstrated using two case studies.

  11. Facies discrimination in a mixed fluvio-eolian setting using elemental whole rock geochemistry

    Svendsen, Johan; Friis, Henrik; Stollhofen, Harald

    2007-01-01

    -eolian successions. The method is developed on the modern fluvio-eolian sediments from the Skeleton Coast dune field, Namibia. The examined sediments comprise eight different facies types; eolian dune sands, inter dune fluvial channel sands, intra erg mass flow deposits, intra erg hyperconcentrated flow deposits......, fluvial channel sands, fluvial mud, lacustrine heterolithic sand and lacustrine heterolithic mud. The contrasting provenance of the fluvial and eolian sediments results in a distinct source fingerprint which can be discriminated using elemental whole rock geochemistry. Multivariate statistical technique...... performed on the geochemical data has enabled discrimination of seven of the eight facies types. Furthermore, the facies discrimination method allowed a quantitative estimate of the degree of fluvial reworking of eolian sand. We believe that the method presented here, when calibrated to a reference well...

  12. The influence of facies heterogeneity on the doublet performance in low-enthalpy geothermal sedimentary reservoirs

    Crooijmans, R. A.; Willems, C. J L; Nick, Hamid

    2016-01-01

    A three-dimensional model is used to study the influence of facies heterogeneity on energy production under different operational conditions of low-enthalpy geothermal doublet systems. Process-based facies modelling is utilised for the Nieuwerkerk sedimentary formation in the West Netherlands Basin...... and the energy recovery rate for different discharge rates and the production temperature (Tmin) above which the doublet is working. With respect to the results, we propose a design model to estimate the life time and energy recovery rate of the geothermal doublet. The life time is estimated as a function of N....../G, Tmin and discharge rate, while the design model for the energy recovery rate is only a function of N/G and Tmin. Both life time and recovery show a positive relation with an increasing N/G. Further our results suggest that neglecting details of process-based facies modelling may lead to significant...

  13. Automated Diatom Analysis Applied to Traditional Light Microscopy: A Proof-of-Concept Study

    Little, Z. H. L.; Bishop, I.; Spaulding, S. A.; Nelson, H.; Mahoney, C.

    2017-12-01

    Diatom identification and enumeration by high resolution light microscopy is required for many areas of research and water quality assessment. Such analyses, however, are both expertise and labor-intensive. These challenges motivate the need for an automated process to efficiently and accurately identify and enumerate diatoms. Improvements in particle analysis software have increased the likelihood that diatom enumeration can be automated. VisualSpreadsheet software provides a possible solution for automated particle analysis of high-resolution light microscope diatom images. We applied the software, independent of its complementary FlowCam hardware, to automated analysis of light microscope images containing diatoms. Through numerous trials, we arrived at threshold settings to correctly segment 67% of the total possible diatom valves and fragments from broad fields of view. (183 light microscope images were examined containing 255 diatom particles. Of the 255 diatom particles present, 216 diatoms valves and fragments of valves were processed, with 170 properly analyzed and focused upon by the software). Manual analysis of the images yielded 255 particles in 400 seconds, whereas the software yielded a total of 216 particles in 68 seconds, thus highlighting that the software has an approximate five-fold efficiency advantage in particle analysis time. As in past efforts, incomplete or incorrect recognition was found for images with multiple valves in contact or valves with little contrast. The software has potential to be an effective tool in assisting taxonomists with diatom enumeration by completing a large portion of analyses. Benefits and limitations of the approach are presented to allow for development of future work in image analysis and automated enumeration of traditional light microscope images containing diatoms.

  14. IMPORTANCE OF APPLYING DATA ENVELOPMENT ANALYSIS IN CASE OF HIGHER EDUCATIONAL INSTITUTIONS

    Labas Istvan

    2015-07-01

    Full Text Available Today, the saying predominates better and better according to which a strong target rationalism has to characterize the higher educational institutions due to the scarce resources and the limitlessness of user demands. Now in Hungary, the funding of higher educational system goes through a total transformation thus the leadership has continuously to reckon with the changes of environment and, in tune with these ones, has to modify the goals existing already. Nowadays, it becomes more and more important to measure the effectiveness of the organizations – organizational units pursuing the same or similar activities relative to each other. Benchmarking helps this procedure. Benchmarking is none other than such a tool of analysis and planning which allows comparing the organizations with the best of the competitors. Applying the method with regard to the higher educational institutions is really nothing but a procedure which focuses on comparing processes and results of the institutions’ different functional areas in order to bring to light the opportunities for the rationality as well as the quality and performance improvement. Those benefits could be managed and used as breakthrough possibilities which have been already developed/applied by other organizations and are given by the way leading to a more effective management.The main goal of my monograph is to show a kind of application of Data Envelopment Analysis (DEA method in the higher education. DEA itself is a performance measuring methodology which is a part of benchmarking and uses the linear programming as a method. By means of its application, the effectiveness of different decision-making units can be compared numerically. In our forcefully varying environment, the managerial decision making can be largely supported in each case by such information that is numerically able to identify which organizational units and activities are effective or less effective. Its advantage is that

  15. Importance of separating sedimentation facies in prospecting for oil and gas pools confined to sloping structures

    Zhang, B

    1984-01-01

    The Shuantotszi field which is in the southeast part of the Sunlyalo oil and gas basin was discovered in 1962. For a long time the correlation of the main factors controlling the oil and gas distribution remained obscure. It has been established in recent years that the main volume of oil and gas is confined to facies in the channels of the second order, arranged between the facies of the main channel and the perlite deposits of the delta. It was established that formation of the accumulation is associated with redistribution and secondary migration of hydrocarbons.

  16. UNCERT: geostatistics, uncertainty analysis and visualization software applied to groundwater flow and contaminant transport modeling

    Wingle, W.L.; Poeter, E.P.; McKenna, S.A.

    1999-01-01

    UNCERT is a 2D and 3D geostatistics, uncertainty analysis and visualization software package applied to ground water flow and contaminant transport modeling. It is a collection of modules that provides tools for linear regression, univariate statistics, semivariogram analysis, inverse-distance gridding, trend-surface analysis, simple and ordinary kriging and discrete conditional indicator simulation. Graphical user interfaces for MODFLOW and MT3D, ground water flow and contaminant transport models, are provided for streamlined data input and result analysis. Visualization tools are included for displaying data input and output. These include, but are not limited to, 2D and 3D scatter plots, histograms, box and whisker plots, 2D contour maps, surface renderings of 2D gridded data and 3D views of gridded data. By design, UNCERT's graphical user interface and visualization tools facilitate model design and analysis. There are few built in restrictions on data set sizes and each module (with two exceptions) can be run in either graphical or batch mode. UNCERT is in the public domain and is available from the World Wide Web with complete on-line and printable (PDF) documentation. UNCERT is written in ANSI-C with a small amount of FORTRAN77, for UNIX workstations running X-Windows and Motif (or Lesstif). This article discusses the features of each module and demonstrates how they can be used individually and in combination. The tools are applicable to a wide range of fields and are currently used by researchers in the ground water, mining, mathematics, chemistry and geophysics, to name a few disciplines. (Copyright (c) 1999 Elsevier Science B.V., Amsterdam. All rights reserved.)

  17. LOGICAL CONDITIONS ANALYSIS METHOD FOR DIAGNOSTIC TEST RESULTS DECODING APPLIED TO COMPETENCE ELEMENTS PROFICIENCY

    V. I. Freyman

    2015-11-01

    Full Text Available Subject of Research.Representation features of education results for competence-based educational programs are analyzed. Solution importance of decoding and proficiency estimation for elements and components of discipline parts of competences is shown. The purpose and objectives of research are formulated. Methods. The paper deals with methods of mathematical logic, Boolean algebra, and parametrical analysis of complex diagnostic test results, that controls proficiency of some discipline competence elements. Results. The method of logical conditions analysis is created. It will give the possibility to formulate logical conditions for proficiency determination of each discipline competence element, controlled by complex diagnostic test. Normalized test result is divided into noncrossing zones; a logical condition about controlled elements proficiency is formulated for each of them. Summarized characteristics for test result zones are imposed. An example of logical conditions forming for diagnostic test with preset features is provided. Practical Relevance. The proposed method of logical conditions analysis is applied in the decoding algorithm of proficiency test diagnosis for discipline competence elements. It will give the possibility to automate the search procedure for elements with insufficient proficiency, and is also usable for estimation of education results of a discipline or a component of competence-based educational program.

  18. Experimental design technique applied to the validation of an instrumental Neutron Activation Analysis procedure

    Santos, Uanda Paula de M. dos; Moreira, Edson Gonçalves

    2017-01-01

    In this study optimization of procedures and standardization of Instrumental Neutron Activation Analysis (INAA) method were carried out for the determination of the elements bromine, chlorine, magnesium, manganese, potassium, sodium and vanadium in biological matrix materials using short irradiations at a pneumatic system. 2 k experimental designs were applied for evaluation of the individual contribution of selected variables of the analytical procedure in the final mass fraction result. The chosen experimental designs were the 2 3 and the 2 4 , depending on the radionuclide half life. Different certified reference materials and multi-element comparators were analyzed considering the following variables: sample decay time, irradiation time, counting time and sample distance to detector. Comparator concentration, sample mass and irradiation time were maintained constant in this procedure. By means of the statistical analysis and theoretical and experimental considerations, it was determined the optimized experimental conditions for the analytical methods that will be adopted for the validation procedure of INAA methods in the Neutron Activation Analysis Laboratory (LAN) of the Research Reactor Center (CRPq) at the Nuclear and Energy Research Institute (IPEN /CNEN-SP). Optimized conditions were estimated based on the results of z-score tests, main effect, interaction effects and better irradiation conditions. (author)

  19. On the Formal-Logical Analysis of the Foundations of Mathematics Applied to Problems in Physics

    Kalanov, Temur Z.

    2016-03-01

    Analysis of the foundations of mathematics applied to problems in physics was proposed. The unity of formal logic and of rational dialectics is methodological basis of the analysis. It is shown that critical analysis of the concept of mathematical quantity - central concept of mathematics - leads to the following conclusion: (1) The concept of ``mathematical quantity'' is the result of the following mental operations: (a) abstraction of the ``quantitative determinacy of physical quantity'' from the ``physical quantity'' at that the ``quantitative determinacy of physical quantity'' is an independent object of thought; (b) abstraction of the ``amount (i.e., abstract number)'' from the ``quantitative determinacy of physical quantity'' at that the ``amount (i.e., abstract number)'' is an independent object of thought. In this case, unnamed, abstract numbers are the only sign of the ``mathematical quantity''. This sign is not an essential sign of the material objects. (2) The concept of mathematical quantity is meaningless, erroneous, and inadmissible concept in science because it represents the following formal-logical and dialectical-materialistic error: negation of the existence of the essential sign of the concept (i.e., negation of the existence of the essence of the concept) and negation of the existence of measure of material object.

  20. Experimental design technique applied to the validation of an instrumental Neutron Activation Analysis procedure

    Santos, Uanda Paula de M. dos; Moreira, Edson Gonçalves, E-mail: uandapaula@gmail.com, E-mail: emoreira@ipen.br [Instituto de Pesquisas Energéticas e Nucleares (IPEN/CNEN-SP), São Paulo, SP (Brazil)

    2017-07-01

    In this study optimization of procedures and standardization of Instrumental Neutron Activation Analysis (INAA) method were carried out for the determination of the elements bromine, chlorine, magnesium, manganese, potassium, sodium and vanadium in biological matrix materials using short irradiations at a pneumatic system. 2{sup k} experimental designs were applied for evaluation of the individual contribution of selected variables of the analytical procedure in the final mass fraction result. The chosen experimental designs were the 2{sup 3} and the 2{sup 4}, depending on the radionuclide half life. Different certified reference materials and multi-element comparators were analyzed considering the following variables: sample decay time, irradiation time, counting time and sample distance to detector. Comparator concentration, sample mass and irradiation time were maintained constant in this procedure. By means of the statistical analysis and theoretical and experimental considerations, it was determined the optimized experimental conditions for the analytical methods that will be adopted for the validation procedure of INAA methods in the Neutron Activation Analysis Laboratory (LAN) of the Research Reactor Center (CRPq) at the Nuclear and Energy Research Institute (IPEN /CNEN-SP). Optimized conditions were estimated based on the results of z-score tests, main effect, interaction effects and better irradiation conditions. (author)

  1. Reflections of the social environment in chimpanzee memory: applying rational analysis beyond humans.

    Stevens, Jeffrey R; Marewski, Julian N; Schooler, Lael J; Gilby, Ian C

    2016-08-01

    In cognitive science, the rational analysis framework allows modelling of how physical and social environments impose information-processing demands onto cognitive systems. In humans, for example, past social contact among individuals predicts their future contact with linear and power functions. These features of the human environment constrain the optimal way to remember information and probably shape how memory records are retained and retrieved. We offer a primer on how biologists can apply rational analysis to study animal behaviour. Using chimpanzees ( Pan troglodytes ) as a case study, we modelled 19 years of observational data on their social contact patterns. Much like humans, the frequency of past encounters in chimpanzees linearly predicted future encounters, and the recency of past encounters predicted future encounters with a power function. Consistent with the rational analyses carried out for human memory, these findings suggest that chimpanzee memory performance should reflect those environmental regularities. In re-analysing existing chimpanzee memory data, we found that chimpanzee memory patterns mirrored their social contact patterns. Our findings hint that human and chimpanzee memory systems may have evolved to solve similar information-processing problems. Overall, rational analysis offers novel theoretical and methodological avenues for the comparative study of cognition.

  2. A Monte Carlo error simulation applied to calibration-free X-ray diffraction phase analysis

    Braun, G.E.

    1986-01-01

    Quantitative phase analysis of a system of n phases can be effected without the need for calibration standards provided at least n different mixtures of these phases are available. A series of linear equations relating diffracted X-ray intensities, weight fractions and quantitation factors coupled with mass balance relationships can be solved for the unknown weight fractions and factors. Uncertainties associated with the measured X-ray intensities, owing to counting of random X-ray quanta, are used to estimate the errors in the calculated parameters utilizing a Monte Carlo simulation. The Monte Carlo approach can be generalized and applied to any quantitative X-ray diffraction phase analysis method. Two examples utilizing mixtures of CaCO 3 , Fe 2 O 3 and CaF 2 with an α-SiO 2 (quartz) internal standard illustrate the quantitative method and corresponding error analysis. One example is well conditioned; the other is poorly conditioned and, therefore, very sensitive to errors in the measured intensities. (orig.)

  3. Reflections of the social environment in chimpanzee memory: applying rational analysis beyond humans

    Marewski, Julian N.; Schooler, Lael J.; Gilby, Ian C.

    2016-01-01

    In cognitive science, the rational analysis framework allows modelling of how physical and social environments impose information-processing demands onto cognitive systems. In humans, for example, past social contact among individuals predicts their future contact with linear and power functions. These features of the human environment constrain the optimal way to remember information and probably shape how memory records are retained and retrieved. We offer a primer on how biologists can apply rational analysis to study animal behaviour. Using chimpanzees (Pan troglodytes) as a case study, we modelled 19 years of observational data on their social contact patterns. Much like humans, the frequency of past encounters in chimpanzees linearly predicted future encounters, and the recency of past encounters predicted future encounters with a power function. Consistent with the rational analyses carried out for human memory, these findings suggest that chimpanzee memory performance should reflect those environmental regularities. In re-analysing existing chimpanzee memory data, we found that chimpanzee memory patterns mirrored their social contact patterns. Our findings hint that human and chimpanzee memory systems may have evolved to solve similar information-processing problems. Overall, rational analysis offers novel theoretical and methodological avenues for the comparative study of cognition. PMID:27853606

  4. Global Appearance Applied to Visual Map Building and Path Estimation Using Multiscale Analysis

    Francisco Amorós

    2014-01-01

    Full Text Available In this work we present a topological map building and localization system for mobile robots based on global appearance of visual information. We include a comparison and analysis of global-appearance techniques applied to wide-angle scenes in retrieval tasks. Next, we define multiscale analysis, which permits improving the association between images and extracting topological distances. Then, a topological map-building algorithm is proposed. At first, the algorithm has information only of some isolated positions of the navigation area in the form of nodes. Each node is composed of a collection of images that covers the complete field of view from a certain position. The algorithm solves the node retrieval and estimates their spatial arrangement. With these aims, it uses the visual information captured along some routes that cover the navigation area. As a result, the algorithm builds a graph that reflects the distribution and adjacency relations between nodes (map. After the map building, we also propose a route path estimation system. This algorithm takes advantage of the multiscale analysis. The accuracy in the pose estimation is not reduced to the nodes locations but also to intermediate positions between them. The algorithms have been tested using two different databases captured in real indoor environments under dynamic conditions.

  5. Multilayers quantitative X-ray fluorescence analysis applied to easel paintings.

    de Viguerie, Laurence; Sole, V Armando; Walter, Philippe

    2009-12-01

    X-ray fluorescence spectrometry (XRF) allows a rapid and simple determination of the elemental composition of a material. As a non-destructive tool, it has been extensively used for analysis in art and archaeology since the early 1970s. Whereas it is commonly used for qualitative analysis, recent efforts have been made to develop quantitative treatment even with portable systems. However, the interpretation of the results obtained with this technique can turn out to be problematic in the case of layered structures such as easel paintings. The use of differential X-ray attenuation enables modelling of the various layers: indeed, the absorption of X-rays through different layers will result in modification of intensity ratio between the different characteristic lines. This work focuses on the possibility to use XRF with the fundamental parameters method to reconstruct the composition and thickness of the layers. This method was tested on several multilayers standards and gives a maximum error of 15% for thicknesses and errors of 10% for concentrations. On a painting test sample that was rather inhomogeneous, the XRF analysis provides an average value. This method was applied in situ to estimate the thickness of the layers a painting from Marco d'Oggiono, pupil of Leonardo da Vinci.

  6. Rock formation characterization for carbon dioxide geosequestration: 3D seismic amplitude and coherency anomalies, and seismic petrophysical facies classification, Wellington and Anson-Bates Fields, Kansas, USA

    Ohl, Derek; Raef, Abdelmoneam

    2014-04-01

    Higher resolution rock formation characterization is of paramount priority, amid growing interest in injecting carbon dioxide, CO2, into subsurface rock formations of depeleting/depleted hydrocarbon reservoirs or saline aquifers in order to reduce emissions of greenhouse gases. In this paper, we present a case study for a Mississippian carbonate characterization integrating post-stack seismic attributes, well log porosities, and seismic petrophysical facies classification. We evaluated changes in petrophysical lithofacies and reveal structural facies-controls in the study area. Three cross-plot clusters in a plot of well log porosity and acoustic impedance corroborated a Neural Network petrophysical facies classification, which was based on training and validation utilizing three petrophysically-different wells and three volume seismic attributes, extracted from a time window including the wavelet of the reservoir-top reflection. Reworked lithofacies along small-throw faults has been revealed based on comparing coherency and seismic petrophysical facies. The main objective of this study is to put an emphasis on reservoir characterization that is both optimized for and subsequently benefiting from pilot tertiary CO2 carbon geosequestration in a depleting reservoir and also in the deeper saline aquifer of the Arbuckle Group, south central Kansas. The 3D seismic coherency attribute, we calculated from a window embracing the Mississippian top reflection event, indicated anomalous features that can be interpreted as a change in lithofacies or faulting effect. An Artificial Neural Network (ANN) lithofacies modeling has been used to better understand these subtle features, and also provide petrophysical classes, which will benefit flow-simulation modeling and/or time-lapse seismic monitoring feasibility analysis. This paper emphasizes the need of paying greater attention to small-scale features when embarking upon characterization of a reservoir or saline-aquifer for CO2

  7. Practical considerations for sensitivity analysis after multiple imputation applied to epidemiological studies with incomplete data

    2012-01-01

    Background Multiple Imputation as usually implemented assumes that data are Missing At Random (MAR), meaning that the underlying missing data mechanism, given the observed data, is independent of the unobserved data. To explore the sensitivity of the inferences to departures from the MAR assumption, we applied the method proposed by Carpenter et al. (2007). This approach aims to approximate inferences under a Missing Not At random (MNAR) mechanism by reweighting estimates obtained after multiple imputation where the weights depend on the assumed degree of departure from the MAR assumption. Methods The method is illustrated with epidemiological data from a surveillance system of hepatitis C virus (HCV) infection in France during the 2001–2007 period. The subpopulation studied included 4343 HCV infected patients who reported drug use. Risk factors for severe liver disease were assessed. After performing complete-case and multiple imputation analyses, we applied the sensitivity analysis to 3 risk factors of severe liver disease: past excessive alcohol consumption, HIV co-infection and infection with HCV genotype 3. Results In these data, the association between severe liver disease and HIV was underestimated, if given the observed data the chance of observing HIV status is high when this is positive. Inference for two other risk factors were robust to plausible local departures from the MAR assumption. Conclusions We have demonstrated the practical utility of, and advocate, a pragmatic widely applicable approach to exploring plausible departures from the MAR assumption post multiple imputation. We have developed guidelines for applying this approach to epidemiological studies. PMID:22681630

  8. Applying Different Independent Component Analysis Algorithms and Support Vector Regression for IT Chain Store Sales Forecasting

    Dai, Wensheng

    2014-01-01

    Sales forecasting is one of the most important issues in managing information technology (IT) chain store sales since an IT chain store has many branches. Integrating feature extraction method and prediction tool, such as support vector regression (SVR), is a useful method for constructing an effective sales forecasting scheme. Independent component analysis (ICA) is a novel feature extraction technique and has been widely applied to deal with various forecasting problems. But, up to now, only the basic ICA method (i.e., temporal ICA model) was applied to sale forecasting problem. In this paper, we utilize three different ICA methods including spatial ICA (sICA), temporal ICA (tICA), and spatiotemporal ICA (stICA) to extract features from the sales data and compare their performance in sales forecasting of IT chain store. Experimental results from a real sales data show that the sales forecasting scheme by integrating stICA and SVR outperforms the comparison models in terms of forecasting error. The stICA is a promising tool for extracting effective features from branch sales data and the extracted features can improve the prediction performance of SVR for sales forecasting. PMID:25165740

  9. Applying different independent component analysis algorithms and support vector regression for IT chain store sales forecasting.

    Dai, Wensheng; Wu, Jui-Yu; Lu, Chi-Jie

    2014-01-01

    Sales forecasting is one of the most important issues in managing information technology (IT) chain store sales since an IT chain store has many branches. Integrating feature extraction method and prediction tool, such as support vector regression (SVR), is a useful method for constructing an effective sales forecasting scheme. Independent component analysis (ICA) is a novel feature extraction technique and has been widely applied to deal with various forecasting problems. But, up to now, only the basic ICA method (i.e., temporal ICA model) was applied to sale forecasting problem. In this paper, we utilize three different ICA methods including spatial ICA (sICA), temporal ICA (tICA), and spatiotemporal ICA (stICA) to extract features from the sales data and compare their performance in sales forecasting of IT chain store. Experimental results from a real sales data show that the sales forecasting scheme by integrating stICA and SVR outperforms the comparison models in terms of forecasting error. The stICA is a promising tool for extracting effective features from branch sales data and the extracted features can improve the prediction performance of SVR for sales forecasting.

  10. The Private Lives of Minerals: Social Network Analysis Applied to Mineralogy and Petrology

    Hazen, R. M.; Morrison, S. M.; Fox, P. A.; Golden, J. J.; Downs, R. T.; Eleish, A.; Prabhu, A.; Li, C.; Liu, C.

    2016-12-01

    Comprehensive databases of mineral species (rruff.info/ima) and their geographic localities and co-existing mineral assemblages (mindat.org) reveal patterns of mineral association and distribution that mimic social networks, as commonly applied to such varied topics as social media interactions, the spread of disease, terrorism networks, and research collaborations. Applying social network analysis (SNA) to common assemblages of rock-forming igneous and regional metamorphic mineral species, we find patterns of cohesion, segregation, density, and cliques that are similar to those of human social networks. These patterns highlight classic trends in lithologic evolution and are illustrated with sociograms, in which mineral species are the "nodes" and co-existing species form "links." Filters based on chemistry, age, structural group, and other parameters highlight visually both familiar and new aspects of mineralogy and petrology. We quantify sociograms with SNA metrics, including connectivity (based on the frequency of co-occurrence of mineral pairs), homophily (the extent to which co-existing mineral species share compositional and other characteristics), network closure (based on the degree of network interconnectivity), and segmentation (as revealed by isolated "cliques" of mineral species). Exploitation of large and growing mineral data resources with SNA offers promising avenues for discovering previously hidden trends in mineral diversity-distribution systematics, as well as providing new pedagogical approaches to teaching mineralogy and petrology.

  11. Applying a social network analysis (SNA) approach to understanding radiologists' performance in reading mammograms

    Tavakoli Taba, Seyedamir; Hossain, Liaquat; Heard, Robert; Brennan, Patrick; Lee, Warwick; Lewis, Sarah

    2017-03-01

    Rationale and objectives: Observer performance has been widely studied through examining the characteristics of individuals. Applying a systems perspective, while understanding of the system's output, requires a study of the interactions between observers. This research explains a mixed methods approach to applying a social network analysis (SNA), together with a more traditional approach of examining personal/ individual characteristics in understanding observer performance in mammography. Materials and Methods: Using social networks theories and measures in order to understand observer performance, we designed a social networks survey instrument for collecting personal and network data about observers involved in mammography performance studies. We present the results of a study by our group where 31 Australian breast radiologists originally reviewed 60 mammographic cases (comprising of 20 abnormal and 40 normal cases) and then completed an online questionnaire about their social networks and personal characteristics. A jackknife free response operating characteristic (JAFROC) method was used to measure performance of radiologists. JAFROC was tested against various personal and network measures to verify the theoretical model. Results: The results from this study suggest a strong association between social networks and observer performance for Australian radiologists. Network factors accounted for 48% of variance in observer performance, in comparison to 15.5% for the personal characteristics for this study group. Conclusion: This study suggest a strong new direction for research into improving observer performance. Future studies in observer performance should consider social networks' influence as part of their research paradigm, with equal or greater vigour than traditional constructs of personal characteristics.

  12. Raman spectroscopy and capillary electrophoresis applied to forensic colour inkjet printer inks analysis.

    Król, Małgorzata; Karoly, Agnes; Kościelniak, Paweł

    2014-09-01

    Forensic laboratories are increasingly engaged in the examination of fraudulent documents, and what is important, in many cases these are inkjet-printed documents. That is why systematic approaches to inkjet printer inks comparison and identification have been carried out by both non-destructive and destructive methods. In this study, micro-Raman spectroscopy and capillary electrophoresis (CE) were applied to the analysis of colour inkjet printer inks. Micro-Raman spectroscopy was used to study the chemical composition of colour inks in situ on a paper surface. It helps to characterize and differentiate inkjet inks, and can be used to create a spectra database of inks taken from different cartridge brands and cartridge numbers. Capillary electrophoresis in micellar electrophoretic capillary chromatography mode was applied to separate colour and colourless components of inks, enabling group identification of those components which occur in a sufficient concentration (giving intensive peaks). Finally, on the basis of the obtained results, differentiation of the analysed inks was performed. Twenty-three samples of inkjet printer inks were examined and the discriminating power (DP) values for both presented methods were established in the routine work of experts during the result interpretation step. DP was found to be 94.0% (Raman) and 95.6% (CE) when all the analysed ink samples were taken into account, and it was 96.7% (Raman) and 98.4% (CE), when only cartridges with different index numbers were considered. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  13. Essays on environmental policy analysis: Computable general equilibrium approaches applied to Sweden

    Hill, M.

    2001-01-01

    This thesis consists of three essays within the field of applied environmental economics, with the common basic aim of analyzing effects of Swedish environmental policy. Starting out from Swedish environmental goals, the thesis assesses a range of policy-related questions. The objective is to quantify policy outcomes by constructing and applying numerical models especially designed for environmental policy analysis. Static and dynamic multi-sectoral computable general equilibrium models are developed in order to analyze the following issues. The costs and benefits of a domestic carbon dioxide (CO 2 ) tax reform. Special attention is given to how these costs and benefits depend on the structure of the tax system and, furthermore, how they depend on policy-induced changes in 'secondary' pollutants. The effects of allowing for emission permit trading through time when the domestic long-term domestic environmental goal is specified in CO 2 stock terms. The effects on long-term projected economic growth and welfare that are due to damages from emission flow and accumulation of 'local' pollutants (nitrogen oxides and sulfur dioxide), as well as the outcome of environmental policy when costs and benefits are considered in an integrated environmental-economic framework

  14. Applying Different Independent Component Analysis Algorithms and Support Vector Regression for IT Chain Store Sales Forecasting

    Wensheng Dai

    2014-01-01

    Full Text Available Sales forecasting is one of the most important issues in managing information technology (IT chain store sales since an IT chain store has many branches. Integrating feature extraction method and prediction tool, such as support vector regression (SVR, is a useful method for constructing an effective sales forecasting scheme. Independent component analysis (ICA is a novel feature extraction technique and has been widely applied to deal with various forecasting problems. But, up to now, only the basic ICA method (i.e., temporal ICA model was applied to sale forecasting problem. In this paper, we utilize three different ICA methods including spatial ICA (sICA, temporal ICA (tICA, and spatiotemporal ICA (stICA to extract features from the sales data and compare their performance in sales forecasting of IT chain store. Experimental results from a real sales data show that the sales forecasting scheme by integrating stICA and SVR outperforms the comparison models in terms of forecasting error. The stICA is a promising tool for extracting effective features from branch sales data and the extracted features can improve the prediction performance of SVR for sales forecasting.

  15. Methods of economic analysis applied to fusion research. Fourth annual report

    Hazelrigg, G.A. Jr.

    1980-01-01

    The current study reported here has involved three separate tasks. The first task deals with the development of expected utility analysis techniques for economic evaluation of fusion research. A decision analytic model is developed for the incorporation of market uncertainties, as well as technological uncertainties in an economic evaluation of long-range energy research. The model is applied to the case of fusion research. The second task deals with the potential effects of long-range energy RD and D on fossil fuel prices. ECON's previous fossil fuel price model is extended to incorporate a dynamic demand function. The dynamic demand function supports price fluctuations such as those observed in the marketplace. The third task examines alternative uses of fusion technologies, specifically superconducting technologies and first wall materials to determine the potential for alternative, nonfusion use of these technologies. In both cases, numerous alternative uses are found

  16. [Methodological novelties applied to the anthropology of food: agent-based models and social networks analysis].

    Díaz Córdova, Diego

    2016-01-01

    The aim of this article is to introduce two methodological strategies that have not often been utilized in the anthropology of food: agent-based models and social networks analysis. In order to illustrate these methods in action, two cases based in materials typical of the anthropology of food are presented. For the first strategy, fieldwork carried out in Quebrada de Humahuaca (province of Jujuy, Argentina) regarding meal recall was used, and for the second, elements of the concept of "domestic consumption strategies" applied by Aguirre were employed. The underlying idea is that, given that eating is recognized as a "total social fact" and, therefore, as a complex phenomenon, the methodological approach must also be characterized by complexity. The greater the number of methods utilized (with the appropriate rigor), the better able we will be to understand the dynamics of feeding in the social environment.

  17. Graph theory applied to noise and vibration control in statistical energy analysis models.

    Guasch, Oriol; Cortés, Lluís

    2009-06-01

    A fundamental aspect of noise and vibration control in statistical energy analysis (SEA) models consists in first identifying and then reducing the energy flow paths between subsystems. In this work, it is proposed to make use of some results from graph theory to address both issues. On the one hand, linear and path algebras applied to adjacency matrices of SEA graphs are used to determine the existence of any order paths between subsystems, counting and labeling them, finding extremal paths, or determining the power flow contributions from groups of paths. On the other hand, a strategy is presented that makes use of graph cut algorithms to reduce the energy flow from a source subsystem to a receiver one, modifying as few internal and coupling loss factors as possible.

  18. Econometrics analysis of consumer behaviour: a linear expenditure system applied to energy

    Giansante, C.; Ferrari, V.

    1996-12-01

    In economics literature the expenditure system specification is a well known subject. The problem is to define a coherent representation of consumer behaviour through functional forms easy to calculate. In this work it is used the Stone-Geary Linear Expenditure System and its multi-level decision process version. The Linear Expenditure system is characterized by an easy calculating estimation procedure, and its multi-level specification allows substitution and complementary relations between goods. Moreover, the utility function separability condition on which the Utility Tree Approach is based, justifies to use an estimation procedure in two or more steps. This allows to use an high degree of expenditure categories disaggregation, impossible to reach the Linear Expediture System. The analysis is applied to energy sectors

  19. A Numerical Procedure for Model Identifiability Analysis Applied to Enzyme Kinetics

    Daele, Timothy, Van; Van Hoey, Stijn; Gernaey, Krist

    2015-01-01

    The proper calibration of models describing enzyme kinetics can be quite challenging. In the literature, different procedures are available to calibrate these enzymatic models in an efficient way. However, in most cases the model structure is already decided on prior to the actual calibration...... and Pronzato (1997) and which can be easily set up for any type of model. In this paper the proposed approach is applied to the forward reaction rate of the enzyme kinetics proposed by Shin and Kim(1998). Structural identifiability analysis showed that no local structural model problems were occurring......) identifiability problems. By using the presented approach it is possible to detect potential identifiability problems and avoid pointless calibration (and experimental!) effort....

  20. Pretreatment procedures applied to samples to be analysed by neutron activation analysis at CDTN/CNEN

    Francisco, Dovenir; Menezes, Maria Angela de Barros Correia

    2009-01-01

    The neutron activation technique - using several methods - has been applied in 80% of the analytical demand of Division for Reactor and Analytical Techniques at CDTN/CNEN, Belo Horizonte, Minas Gerais. This scenario emphasizes the responsibility of the Laboratory to provide and assure the quality of the measurements. The first step to assure the results quality is the preparation of the samples. Therefore, this paper describes the experimental procedures adopted at CDTN/CNEN in order to uniform conditions of analysis and to avoid contaminations by elements present everywhere. Some of the procedures are based on methods described in the literature; others are based on many years of experience preparing samples from many kinds of matrices. The procedures described are related to geological material - soil, sediment, rock, gems, clay, archaeological ceramics and ore - biological materials - hair, fish, plants, food - water, etc. Analytical results in sediment samples are shown as n example pointing out the efficiency of the experimental procedure. (author)

  1. Common faults in turbines and applying neural networks in order to fault diagnostic by vibration analysis

    Masoudifar, M.; AghaAmini, M.

    2001-01-01

    Today the fault diagnostic of the rotating machinery based on the vibration analysis is an effective method in designing predictive maintenance programs. In this method, vibration level of the turbines is monitored and if it is higher than the allowable limit, vibrational data will be analyzed and the growing faults will be detected. But because of the high complexity of the system monitoring, the interpretation of the measured data is more difficult. Therefore, design of the fault diagnostic expert systems by using the expert's technical experiences and knowledge; seem to be the best solution. In this paper,at first several common faults in turbines are studied and the how applying the neural networks to interpret the vibrational data for fault diagnostic is explained

  2. Applied behavior analysis programs for autism: sibling psychosocial adjustment during and following intervention use.

    Cebula, Katie R

    2012-05-01

    Psychosocial adjustment in siblings of children with autism whose families were using a home-based, applied behavior analysis (ABA) program was compared to that of siblings in families who were not using any intensive autism intervention. Data gathered from parents, siblings and teachers indicated that siblings in ABA families experienced neither significant drawbacks nor benefits in terms of their behavioral adjustment, sibling relationship quality and self-concept compared to control group siblings, either during or following intervention use. Parents and siblings perceived improvements in sibling interaction since the outset of ABA, with parents somewhat more positive in their views than were siblings. Social support was associated with better sibling outcomes in all groups. Implications for supporting families using ABA are considered.

  3. [Matrix analysis of the client's voice: QFD applied to healthcare management].

    Lorenzo, Susana; Mira, José; Olarte, Mayerly; Guerrero, Johana; Guerrero, Johann; Moyano, Silvia

    2004-01-01

    To apply quality function deployment (QFD) methodology to identify clients' needs by relating complaints with perceived quality domains. A hospital within the Public Health Service of Madrid. Matrix analysis based on the QFD model was performed, using the surveys (1998-2002) conducted in the hospital with the Servqhos questionnaire and a sample of 363 complaints made in 2002. The complaints analyzed were selected using a non-probabilistic sampling method. QFD methodology was highly useful, allowing complaints to be related to the results of a perceived quality questionnaire and identification of the attributes with the greatest influence on patient satisfaction. It also allowed us to identify areas for improvement according to clients' needs.

  4. Challenges in the implementation of a quality management system applied to radiometric analysis

    Dias, Danila C.S.; Bonifacio, Rodrigo L.; Nascimento, Marcos R.L.; Silva, Nivaldo C. da; Taddei, Maria Helena T., E-mail: danilacdias@gmail.com [Comissao Nacional de Energia Nuclear (LAPOC/CNEN-MG), Pocos de Caldas, MG (Brazil). Laboratorio de Pocos de Caldas

    2015-07-01

    The concept of quality in laboratories has been well established as an essential factor in the search for reliable results. Since its first version published (1999), the ISO/IEC 17025 has been applied in the industrial and research fields, in a wide range of laboratorial analyses. However, the implementation of a Quality Management System still poses great challenges to institutions and companies. The purpose of this work is to expose the constraints related to the implementation of ISO/IEC 17025 applied to analytical assays of radionuclides, accomplished by studying the case of the Pocos de Caldas Laboratory of the Brazilian Commission for Nuclear Energy. In this lab, a project of accreditation of techniques involving determination of radionuclides in water, soil, sediment and food samples has been conducted since 2011. The challenges presented by this project arise from the administrative view, where the governmental nature of the institution translates into unlevelled availability resources and the organizational view, whereas QMS requires inevitable changes in the organizational culture. It is important to point out that when it comes to accreditation of analysis involving radioactive elements, many aspects must be treated carefully due to the their very particular nature. Among these concerns are the determination of analysis uncertainties, accessibility to international proficiency studies, international radioactive samples and CRM transportation, the study of parameters on the validation of analytical methods and the lack of documentation and specialized personnel regarding quality at radiometric measurements. Through an effective management system, the institution is overcoming these challenges, moving toward the ISO/IEC 17025 accreditation. (author)

  5. Challenges in the implementation of a quality management system applied to radiometric analysis

    Dias, Danila C.S.; Bonifacio, Rodrigo L.; Nascimento, Marcos R.L.; Silva, Nivaldo C. da; Taddei, Maria Helena T.

    2015-01-01

    The concept of quality in laboratories has been well established as an essential factor in the search for reliable results. Since its first version published (1999), the ISO/IEC 17025 has been applied in the industrial and research fields, in a wide range of laboratorial analyses. However, the implementation of a Quality Management System still poses great challenges to institutions and companies. The purpose of this work is to expose the constraints related to the implementation of ISO/IEC 17025 applied to analytical assays of radionuclides, accomplished by studying the case of the Pocos de Caldas Laboratory of the Brazilian Commission for Nuclear Energy. In this lab, a project of accreditation of techniques involving determination of radionuclides in water, soil, sediment and food samples has been conducted since 2011. The challenges presented by this project arise from the administrative view, where the governmental nature of the institution translates into unlevelled availability resources and the organizational view, whereas QMS requires inevitable changes in the organizational culture. It is important to point out that when it comes to accreditation of analysis involving radioactive elements, many aspects must be treated carefully due to the their very particular nature. Among these concerns are the determination of analysis uncertainties, accessibility to international proficiency studies, international radioactive samples and CRM transportation, the study of parameters on the validation of analytical methods and the lack of documentation and specialized personnel regarding quality at radiometric measurements. Through an effective management system, the institution is overcoming these challenges, moving toward the ISO/IEC 17025 accreditation. (author)

  6. Bayesian statistics applied to neutron activation data for reactor flux spectrum analysis

    Chiesa, Davide; Previtali, Ezio; Sisti, Monica

    2014-01-01

    Highlights: • Bayesian statistics to analyze the neutron flux spectrum from activation data. • Rigorous statistical approach for accurate evaluation of the neutron flux groups. • Cross section and activation data uncertainties included for the problem solution. • Flexible methodology applied to analyze different nuclear reactor flux spectra. • The results are in good agreement with the MCNP simulations of neutron fluxes. - Abstract: In this paper, we present a statistical method, based on Bayesian statistics, to analyze the neutron flux spectrum from the activation data of different isotopes. The experimental data were acquired during a neutron activation experiment performed at the TRIGA Mark II reactor of Pavia University (Italy) in four irradiation positions characterized by different neutron spectra. In order to evaluate the neutron flux spectrum, subdivided in energy groups, a system of linear equations, containing the group effective cross sections and the activation rate data, has to be solved. However, since the system’s coefficients are experimental data affected by uncertainties, a rigorous statistical approach is fundamental for an accurate evaluation of the neutron flux groups. For this purpose, we applied the Bayesian statistical analysis, that allows to include the uncertainties of the coefficients and the a priori information about the neutron flux. A program for the analysis of Bayesian hierarchical models, based on Markov Chain Monte Carlo (MCMC) simulations, was used to define the problem statistical model and solve it. The first analysis involved the determination of the thermal, resonance-intermediate and fast flux components and the dependence of the results on the Prior distribution choice was investigated to confirm the reliability of the Bayesian analysis. After that, the main resonances of the activation cross sections were analyzed to implement multi-group models with finer energy subdivisions that would allow to determine the

  7. Contribution of the CEC in structural analysis applied to LMFBR problems

    Larsson, L.H.; Terzaghi, A.

    1983-01-01

    This paper presents both the activity of DG XII in field of Codes and Standards (harmonization) and the research activity carried out at the JRC in Ispra. The first part describes the activity performed in the field of structural analysis by the Fast Reactor Coordinating Committee of the CEC and its Working Group Codes and Standards. This activity, which is aimed at resolving difficulties encountered in using design procedures based on ASME Code Case N-47, has made good progress in most areas. Results from recent inelastic and seismic benchmark calculations are presented as well as future computational exercises and investigations related to piping analysis, defect analysis, material behaviour and life prediction at elevated temperature. In the second part of the paper results of recent research and future plans in the area of structural mechanics at the JRC Ispra are discussed. In the past years, a large effort was devoted to the COVA (code validation) program intended to validate dynamic fluid/structure codes necessary for predicting the response of LMFBR containments. The main conclusions that can be drawn from COVA which finishes this year are presented, and some still open questions related to the prediction of containment response to an HCDA are discussed. The paper then describes the identification technique which is applied for the determination of constitutive equations for the dynamic behaviour of materials. In the field of fracture mechanics JRC has mostly concentrated its efforts on the elastic-plastic fracture toughness properties of irradiated austenitic steels. In the future, also dynamic ductile fracture problems will be investigated, for these a large dynamic test facility with a max. force of 5 MN will be used. The numerical analysis methods associated with these tests are discussed. (author)

  8. Success Factors of European Syndromic Surveillance Systems: A Worked Example of Applying Qualitative Comparative Analysis.

    Ziemann, Alexandra; Fouillet, Anne; Brand, Helmut; Krafft, Thomas

    2016-01-01

    Syndromic surveillance aims at augmenting traditional public health surveillance with timely information. To gain a head start, it mainly analyses existing data such as from web searches or patient records. Despite the setup of many syndromic surveillance systems, there is still much doubt about the benefit of the approach. There are diverse interactions between performance indicators such as timeliness and various system characteristics. This makes the performance assessment of syndromic surveillance systems a complex endeavour. We assessed if the comparison of several syndromic surveillance systems through Qualitative Comparative Analysis helps to evaluate performance and identify key success factors. We compiled case-based, mixed data on performance and characteristics of 19 syndromic surveillance systems in Europe from scientific and grey literature and from site visits. We identified success factors by applying crisp-set Qualitative Comparative Analysis. We focused on two main areas of syndromic surveillance application: seasonal influenza surveillance and situational awareness during different types of potentially health threatening events. We found that syndromic surveillance systems might detect the onset or peak of seasonal influenza earlier if they analyse non-clinical data sources. Timely situational awareness during different types of events is supported by an automated syndromic surveillance system capable of analysing multiple syndromes. To our surprise, the analysis of multiple data sources was no key success factor for situational awareness. We suggest to consider these key success factors when designing or further developing syndromic surveillance systems. Qualitative Comparative Analysis helped interpreting complex, mixed data on small-N cases and resulted in concrete and practically relevant findings.

  9. Applied Electromagnetics

    Yamashita, H; Marinova, I; Cingoski, V [eds.

    2002-07-01

    These proceedings contain papers relating to the 3rd Japanese-Bulgarian-Macedonian Joint Seminar on Applied Electromagnetics. Included are the following groups: Numerical Methods I; Electrical and Mechanical System Analysis and Simulations; Inverse Problems and Optimizations; Software Methodology; Numerical Methods II; Applied Electromagnetics.

  10. Applied Electromagnetics

    Yamashita, H.; Marinova, I.; Cingoski, V.

    2002-01-01

    These proceedings contain papers relating to the 3rd Japanese-Bulgarian-Macedonian Joint Seminar on Applied Electromagnetics. Included are the following groups: Numerical Methods I; Electrical and Mechanical System Analysis and Simulations; Inverse Problems and Optimizations; Software Methodology; Numerical Methods II; Applied Electromagnetics

  11. School-Wide PBIS: Extending the Impact of Applied Behavior Analysis. Why is This Important to Behavior Analysts?

    Putnam, Robert F; Kincaid, Donald

    2015-05-01

    Horner and Sugai (2015) recently wrote a manuscript providing an overview of school-wide positive behavioral interventions and supports (PBIS) and why it is an example of applied behavior analysis at the scale of social importance. This paper will describe why school-wide PBIS is important to behavior analysts, how it helps promote applied behavior analysis in schools and other organizations, and how behavior analysts can use this framework to assist them in the promotion and implementation of applied behavior analysis at both at the school and organizational level, as well as, the classroom and individual level.

  12. Acquaintance Rape: Applying Crime Scene Analysis to the Prediction of Sexual Recidivism.

    Lehmann, Robert J B; Goodwill, Alasdair M; Hanson, R Karl; Dahle, Klaus-Peter

    2016-10-01

    The aim of the current study was to enhance the assessment and predictive accuracy of risk assessments for sexual offenders by utilizing detailed crime scene analysis (CSA). CSA was conducted on a sample of 247 male acquaintance rapists from Berlin (Germany) using a nonmetric, multidimensional scaling (MDS) Behavioral Thematic Analysis (BTA) approach. The age of the offenders at the time of the index offense ranged from 14 to 64 years (M = 32.3; SD = 11.4). The BTA procedure revealed three behavioral themes of hostility, criminality, and pseudo-intimacy, consistent with previous CSA research on stranger rape. The construct validity of the three themes was demonstrated through correlational analyses with known sexual offending measures and criminal histories. The themes of hostility and pseudo-intimacy were significant predictors of sexual recidivism. In addition, the pseudo-intimacy theme led to a significant increase in the incremental validity of the Static-99 actuarial risk assessment instrument for the prediction of sexual recidivism. The results indicate the potential utility and validity of crime scene behaviors in the applied risk assessment of sexual offenders. © The Author(s) 2015.

  13. Failure Bounding And Sensitivity Analysis Applied To Monte Carlo Entry, Descent, And Landing Simulations

    Gaebler, John A.; Tolson, Robert H.

    2010-01-01

    In the study of entry, descent, and landing, Monte Carlo sampling methods are often employed to study the uncertainty in the designed trajectory. The large number of uncertain inputs and outputs, coupled with complicated non-linear models, can make interpretation of the results difficult. Three methods that provide statistical insights are applied to an entry, descent, and landing simulation. The advantages and disadvantages of each method are discussed in terms of the insights gained versus the computational cost. The first method investigated was failure domain bounding which aims to reduce the computational cost of assessing the failure probability. Next a variance-based sensitivity analysis was studied for the ability to identify which input variable uncertainty has the greatest impact on the uncertainty of an output. Finally, probabilistic sensitivity analysis is used to calculate certain sensitivities at a reduced computational cost. These methods produce valuable information that identifies critical mission parameters and needs for new technology, but generally at a significant computational cost.

  14. Analysis of Phoenix Anomalies and IV & V Findings Applied to the GRAIL Mission

    Larson, Steve

    2012-01-01

    NASA IV&V was established in 1993 to improve safety and cost-effectiveness of mission critical software. Since its inception the tools and strategies employed by IV&V have evolved. This paper examines how lessons learned from the Phoenix project were developed and applied to the GRAIL project. Shortly after selection, the GRAIL project initiated a review of the issues documented by IV&V for Phoenix. The motivation was twofold: the learn as much as possible about the types of issues that arose from the flight software product line slated for use on GRAIL, and to identify opportunities for improving the effectiveness of IV&V on GRAIL. The IV&V Facility provided a database dump containing 893 issues. These were categorized into 16 bins, and then analyzed according to whether the project responded by changing the affected artifacts or using as-is. The results of this analysis were compared to a similar assessment of post-launch anomalies documented by the project. Results of the analysis were discussed with the IV&V team assigned to GRAIL. These discussions led to changes in the way both the project and IV&V approached the IV&V task, and improved the efficiency of the activity.

  15. How can social network analysis contribute to social behavior research in applied ethology?

    Makagon, Maja M; McCowan, Brenda; Mench, Joy A

    2012-05-01

    Social network analysis is increasingly used by behavioral ecologists and primatologists to describe the patterns and quality of interactions among individuals. We provide an overview of this methodology, with examples illustrating how it can be used to study social behavior in applied contexts. Like most kinds of social interaction analyses, social network analysis provides information about direct relationships (e.g. dominant-subordinate relationships). However, it also generates a more global model of social organization that determines how individual patterns of social interaction relate to individual and group characteristics. A particular strength of this approach is that it provides standardized mathematical methods for calculating metrics of sociality across levels of social organization, from the population and group levels to the individual level. At the group level these metrics can be used to track changes in social network structures over time, evaluate the effect of the environment on social network structure, or compare social structures across groups, populations or species. At the individual level, the metrics allow quantification of the heterogeneity of social experience within groups and identification of individuals who may play especially important roles in maintaining social stability or information flow throughout the network.

  16. Independent component analysis applied to long bunch beams in the Los Alamos Proton Storage Ring

    Kolski, Jeffrey S.; Macek, Robert J.; McCrady, Rodney C.; Pang, Xiaoying

    2012-11-01

    Independent component analysis (ICA) is a powerful blind source separation (BSS) method. Compared to the typical BSS method, principal component analysis, ICA is more robust to noise, coupling, and nonlinearity. The conventional ICA application to turn-by-turn position data from multiple beam position monitors (BPMs) yields information about cross-BPM correlations. With this scheme, multi-BPM ICA has been used to measure the transverse betatron phase and amplitude functions, dispersion function, linear coupling, sextupole strength, and nonlinear beam dynamics. We apply ICA in a new way to slices along the bunch revealing correlations of particle motion within the beam bunch. We digitize beam signals of the long bunch at the Los Alamos Proton Storage Ring with a single device (BPM or fast current monitor) for an entire injection-extraction cycle. ICA of the digitized beam signals results in source signals, which we identify to describe varying betatron motion along the bunch, locations of transverse resonances along the bunch, measurement noise, characteristic frequencies of the digitizing oscilloscopes, and longitudinal beam structure.

  17. Independent component analysis applied to long bunch beams in the Los Alamos Proton Storage Ring

    Jeffrey S. Kolski

    2012-11-01

    Full Text Available Independent component analysis (ICA is a powerful blind source separation (BSS method. Compared to the typical BSS method, principal component analysis, ICA is more robust to noise, coupling, and nonlinearity. The conventional ICA application to turn-by-turn position data from multiple beam position monitors (BPMs yields information about cross-BPM correlations. With this scheme, multi-BPM ICA has been used to measure the transverse betatron phase and amplitude functions, dispersion function, linear coupling, sextupole strength, and nonlinear beam dynamics. We apply ICA in a new way to slices along the bunch revealing correlations of particle motion within the beam bunch. We digitize beam signals of the long bunch at the Los Alamos Proton Storage Ring with a single device (BPM or fast current monitor for an entire injection-extraction cycle. ICA of the digitized beam signals results in source signals, which we identify to describe varying betatron motion along the bunch, locations of transverse resonances along the bunch, measurement noise, characteristic frequencies of the digitizing oscilloscopes, and longitudinal beam structure.

  18. Optimum and robust 3D facies interpolation strategies in a heterogeneous coal zone (Tertiary As Pontes basin, NW Spain)

    Falivene, Oriol; Cabrera, Lluis; Saez, Alberto [Geomodels Institute, Group of Geodynamics and Basin Analysis, Department of Stratigraphy, Paleontology and Marine Geosciences, Universitat de Barcelona, c/ Marti i Franques s/n, Facultat de Geologia, 08028 Barcelona (Spain)

    2007-07-02

    Coal exploration and mining in extensively drilled and sampled coal zones can benefit from 3D statistical facies interpolation. Starting from closely spaced core descriptions, and using interpolation methods, a 3D optimum and robust facies distribution model was obtained for a thick, heterogeneous coal zone deposited in the non-marine As Pontes basin (Oligocene-Early Miocene, NW Spain). Several grid layering styles, interpolation methods (truncated inverse squared distance weighting, truncated kriging, truncated kriging with an areal trend, indicator inverse squared distance weighting, indicator kriging, and indicator kriging with an areal trend) and searching conditions were compared. Facies interpolation strategies were evaluated using visual comparison and cross validation. Moreover, robustness of the resultant facies distribution with respect to variations in interpolation method input parameters was verified by taking into account several scenarios of uncertainty. The resultant 3D facies reconstruction improves the understanding of the distribution and geometry of the coal facies. Furthermore, since some coal quality properties (e.g. calorific value or sulphur percentage) display a good statistical correspondence with facies, predicting the distribution of these properties using the reconstructed facies distribution as a template proved to be a powerful approach, yielding more accurate and realistic reconstructions of these properties in the coal zone. (author)

  19. Hierarchy of facies of pyroclastic flow deposits generated by Laacher See type eruptions

    Freundt, A.; Schmincke, H.-U.

    1985-04-01

    The upper Quaternary pyroclastic flow deposits of Laacher See volcano show compositional and structural facies variations on four different scales: (1) eruptive units of pyroclastic flows, composed of many flow units; (2) depositional cycles of as many as five flow units; flow units containing (3) regional intraflow-unit facies; and (4) local intraflow-unit subfacies. These facies can be explained by successively overlapping processes beginning in the magma column and ending with final deposition. The pyroclastic flow deposits thus reflect major aspects of the eruptive history of Laacher See volcano: (a) drastic changes in eruptive mechanism due to increasing access of water to the magma chamber and (b) change in chemical composition and crystal and gas content as evacuation of a compositionally zoned magma column progressed. The four scales of facies result from four successive sets of processes: (1) differentiation in the magma column and external factors governing the mechanism of eruption; (2) temporal variations of factors inducing eruption column collapse; (3) physical conditions in the eruption column and the way in which its collapse proceeds; and (4) interplay of flow-inherent and morphology-induced transport mechanics.

  20. Facies architecture of heterolithic tidal deposits : The Holocene Holland Tidal Basin

    Donselaar, M.E.; Geel, C.R.

    2007-01-01

    The size, shape and spatial position of lithofacies types (or facies architecture) in a tidal estuarine basin are complex and therefore difficult to model. The tidal currents in the basin concentrate sand-sized sediment in a branching pattern of tidal channels and fringing tidal flats. Away from the

  1. Variations in vitrinite reflectance with organic facies - examples from Pennsylvanian cyclothems of the Midcontinent, USA

    Wenger, L M; Baker, D R

    1987-01-01

    Significant variations in vitrinite reflectance (% R/sub o/) with organic facies have been demonstrated from Pennsylvanian -aged cyclothems of the Midcontinent, USA. Thermal alteration index (TAI) and Rock-Eval T/sub m/ax values remain relatively constant through these thin lithologic successions, regardless of facies, and are in reasonable agreement with R/sub o/ measurements on interbedded coal. Organic-rich black and phosphatic black-shales, which contain significant component of liptinitic organic matter of presumed marine algal derivation, display R/sub o/ values which are suppressed relative to the coal benchmark. A distinct correlation between increased hydrogen index (HI) and liptinite content with suppressed reflectivities is apparent. More oxic facies (e.g. calcareous and fossiliferous gray shales and limestones) often display R/sub o/'s that are considerably higher than for coal. Soxhlet extraction prior to maceration yielded no variation in reflectance compared to non-extracted kerogens suggesting bitumen adsorption was not the cause of the apparent suppression in the organic-rich black-shales. Lower total organic carbon (TOC)-normalized bitumen contents and Rock-Eval transformations ratios in liptinite-rich facies suggest differential reaction kinetics for kerogen types, with terrestrial organic matter 'maturing' at an earlier stage than hydrogen-rich marine-derived organic matter. 8 refs., 6 figs., 1 tab.

  2. Getting to First Base: Prima Facie Arguments for Propositions of Value.

    Tuman, Joseph S.

    1987-01-01

    Argues that few clear standards exist for value debate. Defines values as instrumental or terminal, and identifies four prima facie burdens necessary for affirming a value resolution: value identification; value criteria; value hierarchy; and topicality through relevance. Examines the role of presumption and burden of proof in value debate. (MM)

  3. The Burger Court and the Prima Facie Case in Employment Discrimination Litigation: A Critique.

    Friedman, Joel William

    1979-01-01

    The unprincipled and contrived reasoning running through these opinions manifests an intentional effort by the Court to impede litigants' ability to secure their rights to equal employment opportunity by raising the requirements of the prima facie case. Available from Fred B. Rothman & Co., 10368 West Centennial Road, Littleton, CO 80123; sc…

  4. Cataplectic facies: clinical marker in the diagnosis of childhood narcolepsy-report of two cases.

    Prasad, Manish; Setty, Gururaj; Ponnusamy, Athi; Hussain, Nahin; Desurkar, Archana

    2014-05-01

    Narcolepsy is a chronic disease and is commonly diagnosed in adulthood. However, more than half of the patients have onset of symptoms in childhood and/or adolescence. The full spectrum of clinical manifestations, namely excessive daytime sleepiness, cataplexy, hypnagogic hallucinations, and sleep paralysis, is usually not present at disease onset, delaying diagnosis during childhood. Mean delay in diagnosis since symptom onset is known to be several years. Initial manifestations can sometimes be as subtle as only partial drooping of eyelids leading to confusion with a myasthenic condition. We present two children who presented with "cataplectic facies," an unusual facial feature only recently described in children with narcolepsy with cataplexy. The diagnosis of narcolepsy was confirmed by multiple sleep latency test along with human leukocyte antigen typing and cerebrospinal fluid hypocretin assay. The diagnosis of narcolepsy with cataplexy at onset can be challenging in young children. With more awareness of subtle signs such as cataplectic facies, earlier diagnosis is possible. To date, only 11 children between 6 and 18 years of age presenting with typical cataplectic facies have been reported in the literature. We present two patients, one of whom is the youngest individual (4 years old) yet described with the typical cataplectic facies. Copyright © 2014 Elsevier Inc. All rights reserved.

  5. Applying information network analysis to fire-prone landscapes: implications for community resilience

    Derric B. Jacobs

    2017-03-01

    Full Text Available Resilient communities promote trust, have well-developed networks, and can adapt to change. For rural communities in fire-prone landscapes, current resilience strategies may prove insufficient in light of increasing wildfire risks due to climate change. It is argued that, given the complexity of climate change, adaptations are best addressed at local levels where specific social, cultural, political, and economic conditions are matched with local risks and opportunities. Despite the importance of social networks as key attributes of community resilience, research using social network analysis on coupled human and natural systems is scarce. Furthermore, the extent to which local communities in fire-prone areas understand climate change risks, accept the likelihood of potential changes, and have the capacity to develop collaborative mitigation strategies is underexamined, yet these factors are imperative to community resiliency. We apply a social network framework to examine information networks that affect perceptions of wildfire and climate change in Central Oregon. Data were collected using a mailed questionnaire. Analysis focused on the residents' information networks that are used to gain awareness of governmental activities and measures of community social capital. A two-mode network analysis was used to uncover information exchanges. Results suggest that the general public develops perceptions about climate change based on complex social and cultural systems rather than as patrons of scientific inquiry and understanding. It appears that perceptions about climate change itself may not be the limiting factor in these communities' adaptive capacity, but rather how they perceive local risks. We provide a novel methodological approach in understanding rural community adaptation and resilience in fire-prone landscapes and offer a framework for future studies.

  6. Multinomial Logistic Regression & Bootstrapping for Bayesian Estimation of Vertical Facies Prediction in Heterogeneous Sandstone Reservoirs

    Al-Mudhafar, W. J.

    2013-12-01

    Precisely prediction of rock facies leads to adequate reservoir characterization by improving the porosity-permeability relationships to estimate the properties in non-cored intervals. It also helps to accurately identify the spatial facies distribution to perform an accurate reservoir model for optimal future reservoir performance. In this paper, the facies estimation has been done through Multinomial logistic regression (MLR) with respect to the well logs and core data in a well in upper sandstone formation of South Rumaila oil field. The entire independent variables are gamma rays, formation density, water saturation, shale volume, log porosity, core porosity, and core permeability. Firstly, Robust Sequential Imputation Algorithm has been considered to impute the missing data. This algorithm starts from a complete subset of the dataset and estimates sequentially the missing values in an incomplete observation by minimizing the determinant of the covariance of the augmented data matrix. Then, the observation is added to the complete data matrix and the algorithm continues with the next observation with missing values. The MLR has been chosen to estimate the maximum likelihood and minimize the standard error for the nonlinear relationships between facies & core and log data. The MLR is used to predict the probabilities of the different possible facies given each independent variable by constructing a linear predictor function having a set of weights that are linearly combined with the independent variables by using a dot product. Beta distribution of facies has been considered as prior knowledge and the resulted predicted probability (posterior) has been estimated from MLR based on Baye's theorem that represents the relationship between predicted probability (posterior) with the conditional probability and the prior knowledge. To assess the statistical accuracy of the model, the bootstrap should be carried out to estimate extra-sample prediction error by randomly

  7. Modern foraminiferal facies in a subtropical estuarine channel, Bertioga, São Paulo, Brazil

    Eichler, P.P.B.; Eichler, B.B.; De Miranda, L. B.; Rodrigues, A.R.

    2007-01-01

    Numerical analyses of modern foraminiferal abundance and environmental data from the Bertioga Channel (Sa??o Paulo, Brazil) reveal multiple biofacies within an overall paralic setting. Despite its fisheries, mariculture and attraction to tourists, the environmental state of Bertioga Channel remains poorly studied. The present investigation is an attempt to partly fill this gap; the parameters examined include depth, salinity, temperature, organic carbon, sulfur content and bottom sediment type. Muddy sediments with high organic carbon content derived from land drainage are found in the inner parts of the channel, whereas sandy sediment dominates the areas adjacent to the Atlantic Ocean. In the eastern entrance to the channel, sandy sediment contain species of Rotaliida from Facies 1 (including Elphidium discoidale, Elphidium poeyanum, Hanzawaia boueana, Pararotalia cananeiaensis and Nonionella atlantica), reflecting normal marine salinity. Sediments with high percentages of silt and clay in polyhaline and eurybaline environments of the eastern part and Itapanhau?? River contain Facies 2, which includes Ammonia beccarii and Pararotalia cananeiaensis. In the western entrance and central, western and eastern parts, where salinities vary from 18 to 30 psu and the sediments contain both low and high organic carbon, the foraminifera from Facies 3 are dominated by Quinqueloculina milletti, Arenoparrella mexicana, Pararotalia cananeiaensis, Ammonia beccarii, Buliminella elegantissima, Elphidium sp., Elphidium excavatum, Elphidium gunteri and Elphidium poeyanum. In mesohaline and polyhaline waters of the central part, the organic-carbon-rich silt and clay contain Facies 4, which includes Ammonia beccarii, Pararotalia cananeiaensis, Elphidium excavatum and Elphidium sp. Most of organic-carbon-enriched, silty-clay substrates that are subject to the highest fresh-water discharge and high bottom temperatures support two different assemblages: one of mostly Rotaliina and the

  8. Comparative analysis of lockout programs and procedures applied to industrial machines

    Chinniah, Y.; Champoux, M.; Burlet-Vienney, D.; Daigle, R. [Institut de recherche Robert-Sauve en sante et en securite du travail, Montreal, PQ (Canada)

    2008-09-15

    In 2005, approximately 20 workers in Quebec were killed by dangerous machines. Approximately 13,000 accidents in the province were linked to the use of machines. The resulting cost associated with these accidents was estimated to be $70 million to the Quebec Occupational Health and Safety Commission (CSST) in compensation and salary replacement. According to article 185 of the Quebec Occupational Health and Safety Regulation (RSST), workers intervening in hazardous zones of machines and processes during maintenance, repairs, and unjamming activities must apply lockout procedures. Lockout is defined as the placement of a lock or tag on an energy-isolating device in accordance with an established procedure, indicating that the energy-isolating device is not to be operated until removal of the lock or tag in accordance with an established procedure. This report presented a comparative analysis of lockout programs and procedures applied to industrial machines. The study attempted to answer several questions regarding the concept of lockout and its definition in the literature; the differences between legal lockout requirements among provinces and countries; different standards on lockout; the contents of lockout programs as described by different documents; and the compliance of lockout programs in a sample of industries in Quebec in terms of Canadian standard on lockout, the CSA Z460-05 (2005). The report discussed the research objectives, methodology, and results of the study. It was concluded that the concept of lockout has different meanings or definitions in the literature, especially in regulations. However, definitions of lockout which are found in standards have certain similarities. 50 refs., 52 tabs., 2 appendices.

  9. A variable age of onset segregation model for linkage analysis, with correction for ascertainment, applied to glioma

    Sun, Xiangqing; Vengoechea, Jaime; Elston, Robert

    2012-01-01

    We propose a 2-step model-based approach, with correction for ascertainment, to linkage analysis of a binary trait with variable age of onset and apply it to a set of multiplex pedigrees segregating for adult glioma....

  10. Non-Linear Non Stationary Analysis of Two-Dimensional Time-Series Applied to GRACE Data, Phase II

    National Aeronautics and Space Administration — The proposed innovative two-dimensional (2D) empirical mode decomposition (EMD) analysis was applied to NASA's Gravity Recovery and Climate Experiment (GRACE)...

  11. A Pilot Study on the Combination of Applied Behavior Analysis and Bumetanide Treatment for Children with Autism

    Du, L.; Shan, L.; Wang, B.; Li, H.; Xu, Z.; Staal, W.G.; Jia, F.

    2015-01-01

    OBJECTIVE: The purpose of this study was to investigate the therapeutic effects of combined bumetanide and applied behavior analysis (ABA) treatment in children with autism. METHODS: Sixty children diagnosed with autism according to the International Classification of Diseases, Tenth Revision

  12. Sedimentary Facies Mapping Based on Tidal Channel Network and Topographic Features

    Ryu, J. H.; Lee, Y. K.; Kim, K.; Kim, B.

    2015-12-01

    Tidal flats on the west coast of Korea suffer intensive changes in their surface sedimentary facies as a result of the influence of natural and artificial changes. Spatial relationships between surface sedimentary facies distribution and benthic environments were estimated for the open-type Ganghwa tidal flat and semi closed-type Hwangdo tidal flat, Korea. In this study, we standardized the surface sedimentary facies and tidal channel index of the channel density, distance, thickness and order. To extract tidal channel information, we used remotely sensed data, such as those from the Korea Multi-Purpose Satellite (KOMPSAT)-2, KOMPSAT-3, and aerial photographs. Surface sedimentary facies maps were generated based on field data using an interpolation method.The tidal channels in each sediment facies had relatively constant meandering patterns, but the density and complexity were distinguishable. The second fractal dimension was 1.7-1.8 in the mud flat, about 1.4 in the mixed flat, and about 1.3 in the sand flat. The channel density was 0.03-0.06 m/m2 in the mud flat and less than 0.02 m/m2 in the mixed and sand flat areas of the two test areas. Low values of the tidal channel index, which indicated a simple pattern of tidal channel distribution, were identified at areas having low elevation and coarse-grained sediments. By contrast, high values of the tidal channel index, which indicated a dendritic pattern of tidal channel distribution, were identified at areas having high elevation and fine-grained sediments. Surface sediment classification based on remotely sensed data must circumspectly consider an effective critical grain size, water content, local topography, and intertidal structures.

  13. Bias analysis applied to Agricultural Health Study publications to estimate non-random sources of uncertainty.

    Lash, Timothy L

    2007-11-26

    The associations of pesticide exposure with disease outcomes are estimated without the benefit of a randomized design. For this reason and others, these studies are susceptible to systematic errors. I analyzed studies of the associations between alachlor and glyphosate exposure and cancer incidence, both derived from the Agricultural Health Study cohort, to quantify the bias and uncertainty potentially attributable to systematic error. For each study, I identified the prominent result and important sources of systematic error that might affect it. I assigned probability distributions to the bias parameters that allow quantification of the bias, drew a value at random from each assigned distribution, and calculated the estimate of effect adjusted for the biases. By repeating the draw and adjustment process over multiple iterations, I generated a frequency distribution of adjusted results, from which I obtained a point estimate and simulation interval. These methods were applied without access to the primary record-level dataset. The conventional estimates of effect associating alachlor and glyphosate exposure with cancer incidence were likely biased away from the null and understated the uncertainty by quantifying only random error. For example, the conventional p-value for a test of trend in the alachlor study equaled 0.02, whereas fewer than 20% of the bias analysis iterations yielded a p-value of 0.02 or lower. Similarly, the conventional fully-adjusted result associating glyphosate exposure with multiple myleoma equaled 2.6 with 95% confidence interval of 0.7 to 9.4. The frequency distribution generated by the bias analysis yielded a median hazard ratio equal to 1.5 with 95% simulation interval of 0.4 to 8.9, which was 66% wider than the conventional interval. Bias analysis provides a more complete picture of true uncertainty than conventional frequentist statistical analysis accompanied by a qualitative description of study limitations. The latter approach is

  14. Bias analysis applied to Agricultural Health Study publications to estimate non-random sources of uncertainty

    Lash Timothy L

    2007-11-01

    Full Text Available Abstract Background The associations of pesticide exposure with disease outcomes are estimated without the benefit of a randomized design. For this reason and others, these studies are susceptible to systematic errors. I analyzed studies of the associations between alachlor and glyphosate exposure and cancer incidence, both derived from the Agricultural Health Study cohort, to quantify the bias and uncertainty potentially attributable to systematic error. Methods For each study, I identified the prominent result and important sources of systematic error that might affect it. I assigned probability distributions to the bias parameters that allow quantification of the bias, drew a value at random from each assigned distribution, and calculated the estimate of effect adjusted for the biases. By repeating the draw and adjustment process over multiple iterations, I generated a frequency distribution of adjusted results, from which I obtained a point estimate and simulation interval. These methods were applied without access to the primary record-level dataset. Results The conventional estimates of effect associating alachlor and glyphosate exposure with cancer incidence were likely biased away from the null and understated the uncertainty by quantifying only random error. For example, the conventional p-value for a test of trend in the alachlor study equaled 0.02, whereas fewer than 20% of the bias analysis iterations yielded a p-value of 0.02 or lower. Similarly, the conventional fully-adjusted result associating glyphosate exposure with multiple myleoma equaled 2.6 with 95% confidence interval of 0.7 to 9.4. The frequency distribution generated by the bias analysis yielded a median hazard ratio equal to 1.5 with 95% simulation interval of 0.4 to 8.9, which was 66% wider than the conventional interval. Conclusion Bias analysis provides a more complete picture of true uncertainty than conventional frequentist statistical analysis accompanied by a

  15. Uncertainty Analysis of A Flood Risk Mapping Procedure Applied In Urban Areas

    Krause, J.; Uhrich, S.; Bormann, H.; Diekkrüger, B.

    In the framework of IRMA-Sponge program the presented study was part of the joint research project FRHYMAP (flood risk and hydrological mapping). A simple con- ceptual flooding model (FLOODMAP) has been developed to simulate flooded areas besides rivers within cities. FLOODMAP requires a minimum of input data (digital el- evation model (DEM), river line, water level plain) and parameters and calculates the flood extent as well as the spatial distribution of flood depths. of course the simulated model results are affected by errors and uncertainties. Possible sources of uncertain- ties are the model structure, model parameters and input data. Thus after the model validation (comparison of simulated water to observed extent, taken from airborne pictures) the uncertainty of the essential input data set (digital elevation model) was analysed. Monte Carlo simulations were performed to assess the effect of uncertain- ties concerning the statistics of DEM quality and to derive flooding probabilities from the set of simulations. The questions concerning a minimum resolution of a DEM re- quired for flood simulation and concerning the best aggregation procedure of a given DEM was answered by comparing the results obtained using all available standard GIS aggregation procedures. Seven different aggregation procedures were applied to high resolution DEMs (1-2m) in three cities (Bonn, Cologne, Luxembourg). Basing on this analysis the effect of 'uncertain' DEM data was estimated and compared with other sources of uncertainties. Especially socio-economic information and monetary transfer functions required for a damage risk analysis show a high uncertainty. There- fore this study helps to analyse the weak points of the flood risk and damage risk assessment procedure.

  16. Applied satellite remote sensing to runoff analysis: Through the effective depth of soil layer

    Yamamoto, Y.; Kondoh, T.; Kida, T.; Nishikawa, H.

    2002-01-01

    The thickness of the soil layers in which tree roots are able to develop freely influences forest composition and growth. Trees growing in shallow soil are usually less well supplied with water and mineral nutrients than those growing in deeper soil. A soil may be deep in an absolute sense but, because of a relatively impervious layer, such as hardpan or because of a high water-table, may be shallow in a physiological sense. Penetrability measurements have been found useful in evaluating the influence of different forest types on the physical properties of soils. Commonly the penetrability of soils can be measured by using the Hasegawa-formed soil penetrometer and can be judged as the soil softness content (SSC). Previous studies report soil with more than 1.9 cm/drop of SSC to be highly permeable and therefore roots are more likely to be extensively developed. Based upon this theory the depth of soil layer with more than 1.9 cm/drop of SSC can be defined as the Effective Depth of Soil Layer (EDSL). We examined the relationship between the Ratio Vegetation Index (RVI) and the EDSL and established a 'Runoff Simulation Model (RSM)' based upon the theory of the Storage Function Model method. The conclusions are that (1) a strong positive correlation between the RVI (ground measured) and the EDSL was given, (2) applying results of conclusion (1) to satellite analysis a similar correlation between the RVI (satellite analysis of JERS 1/OPS data) and the EDSL was observed and (3) the simulated storm-runoff hydro graph coincides with the observed one well

  17. Cost-effectiveness analysis in melanoma detection: A transition model applied to dermoscopy.

    Tromme, Isabelle; Legrand, Catherine; Devleesschauwer, Brecht; Leiter, Ulrike; Suciu, Stefan; Eggermont, Alexander; Sacré, Laurine; Baurain, Jean-François; Thomas, Luc; Beutels, Philippe; Speybroeck, Niko

    2016-11-01

    The main aim of this study is to demonstrate how our melanoma disease model (MDM) can be used for cost-effectiveness analyses (CEAs) in the melanoma detection field. In particular, we used the data of two cohorts of Belgian melanoma patients to investigate the cost-effectiveness of dermoscopy. A MDM, previously constructed to calculate the melanoma burden, was slightly modified to be suitable for CEAs. Two cohorts of patients entered into the model to calculate morbidity, mortality and costs. These cohorts were constituted by melanoma patients diagnosed by dermatologists adequately, or not adequately, trained in dermoscopy. Effectiveness and costs were calculated for each cohort and compared. Effectiveness was expressed in quality-adjusted life years (QALYs), a composite measure depending on melanoma-related morbidity and mortality. Costs included costs of treatment and follow-up as well as costs of detection in non-melanoma patients and costs of excision and pathology of benign lesions excised to rule out melanoma. The result of our analysis concluded that melanoma diagnosis by dermatologists adequately trained in dermoscopy resulted in both a gain of QALYs (less morbidity and/or mortality) and a reduction in costs. This study demonstrates how our MDM can be used in CEAs in the melanoma detection field. The model and the methodology suggested in this paper were applied to two cohorts of Belgian melanoma patients. Their analysis concluded that adequate dermoscopy training is cost-effective. The results should be confirmed by a large-scale randomised study. Copyright © 2016 Elsevier Ltd. All rights reserved.

  18. Parameter estimation and determinability analysis applied to Drosophila gap gene circuits

    Jaeger Johannes

    2008-09-01

    Full Text Available Abstract Background Mathematical modeling of real-life processes often requires the estimation of unknown parameters. Once the parameters are found by means of optimization, it is important to assess the quality of the parameter estimates, especially if parameter values are used to draw biological conclusions from the model. Results In this paper we describe how the quality of parameter estimates can be analyzed. We apply our methodology to assess parameter determinability for gene circuit models of the gap gene network in early Drosophila embryos. Conclusion Our analysis shows that none of the parameters of the considered model can be determined individually with reasonable accuracy due to correlations between parameters. Therefore, the model cannot be used as a tool to infer quantitative regulatory weights. On the other hand, our results show that it is still possible to draw reliable qualitative conclusions on the regulatory topology of the gene network. Moreover, it improves previous analyses of the same model by allowing us to identify those interactions for which qualitative conclusions are reliable, and those for which they are ambiguous.

  19. Spatial analysis techniques applied to uranium prospecting in Chihuahua State, Mexico

    Hinojosa de la Garza, Octavio R.; Montero Cabrera, María Elena; Sanín, Luz H.; Reyes Cortés, Manuel; Martínez Meyer, Enrique

    2014-07-01

    To estimate the distribution of uranium minerals in Chihuahua, the advanced statistical model "Maximun Entropy Method" (MaxEnt) was applied. A distinguishing feature of this method is that it can fit more complex models in case of small datasets (x and y data), as is the location of uranium ores in the State of Chihuahua. For georeferencing uranium ores, a database from the United States Geological Survey and workgroup of experts in Mexico was used. The main contribution of this paper is the proposal of maximum entropy techniques to obtain the mineral's potential distribution. For this model were used 24 environmental layers like topography, gravimetry, climate (worldclim), soil properties and others that were useful to project the uranium's distribution across the study area. For the validation of the places predicted by the model, comparisons were done with other research of the Mexican Service of Geological Survey, with direct exploration of specific areas and by talks with former exploration workers of the enterprise "Uranio de Mexico". Results. New uranium areas predicted by the model were validated, finding some relationship between the model predictions and geological faults. Conclusions. Modeling by spatial analysis provides additional information to the energy and mineral resources sectors.

  20. Multivariate analysis applied to monthly rainfall over Rio de Janeiro state, Brazil

    Brito, Thábata T.; Oliveira-Júnior, José F.; Lyra, Gustavo B.; Gois, Givanildo; Zeri, Marcelo

    2017-10-01

    Spatial and temporal patterns of rainfall were identified over the state of Rio de Janeiro, southeast Brazil. The proximity to the coast and the complex topography create great diversity of rainfall over space and time. The dataset consisted of time series (1967-2013) of monthly rainfall over 100 meteorological stations. Clustering analysis made it possible to divide the stations into six groups (G1, G2, G3, G4, G5 and G6) with similar rainfall spatio-temporal patterns. A linear regression model was applied to a time series and a reference. The reference series was calculated from the average rainfall within a group, using nearby stations with higher correlation (Pearson). Based on t-test ( p River (G5) and the metropolitan area of the city of Rio de Janeiro (G6). The driest months in all regions were June, July and August, while November, December and January were the rainiest months. Sharp transitions occurred when considering monthly accumulated rainfall: from January to February, and from February to March, likely associated with episodes of "veranicos", i.e., periods of 4-15 days of duration with no rainfall.

  1. Regional LLRW processing alternatives applying the DOE REGINALT systems analysis model

    Beers, G.H.

    1987-01-01

    The DOE Low-Level Waste Management Program has developed a computer-based decision support system of models that may be used by nonprogrammers to evaluate a comprehensive approach to commercial low-level radioactive waste (LLRW) management. REGINALT (Regional Waste Management Alternatives Analysis Model) implementation will be described as the model is applied to hypothetical regional compact for the purpose of examining the technical and economic potential of two waste processing alternatives. Using waste from a typical regional compact, two specific regional waste processing centers are compared for feasibility. Example 1 assumes that a regional supercompaction facility is being developed for the region. Example 2 assumes that a regional facility with both supercompaction and incineration is specified. Both examples include identical disposal facilities, except that capacity may differ due to variation in volume reduction achieved. The two examples are compared with regard to volume reduction achieved, estimated occupational exposure for the processing facilities, and life cycle costs per generated unit waste. A base case also illustrates current disposal practices. The results of the comparisons evaluated, and other steps, if necessary, for additional decision support are identified

  2. Superposed epoch analysis applied to large-amplitude travelling convection vortices

    H. Lühr

    1998-07-01

    Full Text Available For the six months from 1 October 1993 to 1 April 1994 the recordings of the IMAGE magnetometer network have been surveyed in a search for large-amplitude travelling convection vortices (TCVs. The restriction to large amplitudes (>100 nT was chosen to ensure a proper detection of evens also during times of high activity. Readings of all stations of the northern half of the IMAGE network were employed to check the consistency of the ground signature with the notation of a dual-vortex structure moving in an azimuthal direction. Applying these stringent selection criteria we detected a total of 19 clear TCV events. The statistical properties of our selection resemble the expected characteristics of large-amplitude TCVs. New and unexpected results emerged from the superposed epoch analysis. TCVs tend to form during quiet intervals embedded in moderately active periods. The occurrence of events is not randomly distributed but rather shows a clustering around a few days. These clusters recur once or twice every 27 days. Within a storm cycle they show up five to seven days after the commencement. With regard to solar wind conditions, we see the events occurring in the middle of the IMF sector structure. Large-amplitude TCVs seem to require certain conditions to make solar wind transients 'geoeffective', which have the tendency to recur with the solar rotation period.Key words. Ionosphere (Aural ionosphere; Ionosphere- magnetosphere interactions · Magnetospheric Physics (current system

  3. Experimental and NMR theoretical methodology applied to geometric analysis of the bioactive clerodane trans-dehydrocrotonin

    Soares, Breno Almeida; Firme, Caio Lima, E-mail: firme.caio@gmail.com, E-mail: caiofirme@quimica.ufrn.br [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil). Instituto de Quimica; Maciel, Maria Aparecida Medeiros [Universidade Potiguar, Natal, RN (Brazil). Programa de Pos-graduacao em Biotecnologia; Kaiser, Carlos R. [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Instituto de Quimica; Schilling, Eduardo; Bortoluzzi, Adailton J. [Universidade Federal de Santa Catarina (UFSC), Florianopolis, SC (Brazil). Departamento de Quimica

    2014-04-15

    trans-Dehydrocrotonin (t-DCTN) a bioactive 19-nor-diterpenoid clerodane type isolated from Croton cajucara Benth, is one of the most investigated clerodane in the current literature. In this work, a new approach joining X-ray diffraction data, nuclear magnetic resonance (NMR) data and theoretical calculations was applied to the thorough characterization of t-DCTN. For that, the geometry of t-DCTN was reevaluated by X-ray diffraction as well as {sup 1}H and {sup 13}C NMR data, whose geometrical parameters where compared to those obtained from B3LYP/6-311G++(d,p) level of theory. From the evaluation of both calculated and experimental values of {sup 1}H and {sup 13}C NMR chemical shifts and spin-spin coupling constants, it was found very good correlations between theoretical and experimental magnetic properties of t-DCTN. Additionally, the delocalization indexes between hydrogen atoms correlated accurately with theoretical and experimental spin-spin coupling constants. An additional topological analysis from quantum theory of atoms in molecules (QTAIM) showed intramolecular interactions for t-DCTN. (author)

  4. Applying a sociolinguistic model to the analysis of informed consent documents.

    Granero-Molina, José; Fernández-Sola, Cayetano; Aguilera-Manrique, Gabriel

    2009-11-01

    Information on the risks and benefits related to surgical procedures is essential for patients in order to obtain their informed consent. Some disciplines, such as sociolinguistics, offer insights that are helpful for patient-professional communication in both written and oral consent. Communication difficulties become more acute when patients make decisions through an informed consent document because they may sign this with a lack of understanding and information, and consequently feel deprived of their freedom to make their choice about different treatments or surgery. This article discusses findings from documentary analysis using the sociolinguistic SPEAKING model, which was applied to the general and specific informed consent documents required for laparoscopic surgery of the bile duct at Torrecárdenas Hospital, Almería, Spain. The objective of this procedure was to identify flaws when information was provided, together with its readability, its voluntary basis, and patients' consent. The results suggest potential linguistic communication difficulties, different languages being used, cultural clashes, asymmetry of communication between professionals and patients, assignment of rights on the part of patients, and overprotection of professionals and institutions.

  5. An IMU-to-Body Alignment Method Applied to Human Gait Analysis

    Laura Susana Vargas-Valencia

    2016-12-01

    Full Text Available This paper presents a novel calibration procedure as a simple, yet powerful, method to place and align inertial sensors with body segments. The calibration can be easily replicated without the need of any additional tools. The proposed method is validated in three different applications: a computer mathematical simulation; a simplified joint composed of two semi-spheres interconnected by a universal goniometer; and a real gait test with five able-bodied subjects. Simulation results demonstrate that, after the calibration method is applied, the joint angles are correctly measured independently of previous sensor placement on the joint, thus validating the proposed procedure. In the cases of a simplified joint and a real gait test with human volunteers, the method also performs correctly, although secondary plane errors appear when compared with the simulation results. We believe that such errors are caused by limitations of the current inertial measurement unit (IMU technology and fusion algorithms. In conclusion, the presented calibration procedure is an interesting option to solve the alignment problem when using IMUs for gait analysis.

  6. Attractor structure discriminates sleep states: recurrence plot analysis applied to infant breathing patterns.

    Terrill, Philip Ian; Wilson, Stephen James; Suresh, Sadasivam; Cooper, David M; Dakin, Carolyn

    2010-05-01

    Breathing patterns are characteristically different between infant active sleep (AS) and quiet sleep (QS), and statistical quantifications of interbreath interval (IBI) data have previously been used to discriminate between infant sleep states. It has also been identified that breathing patterns are governed by a nonlinear controller. This study aims to investigate whether nonlinear quantifications of infant IBI data are characteristically different between AS and QS, and whether they may be used to discriminate between these infant sleep states. Polysomnograms were obtained from 24 healthy infants at six months of age. Periods of AS and QS were identified, and IBI data extracted. Recurrence quantification analysis (RQA) was applied to each period, and recurrence calculated for a fixed radius in the range of 0-8 in steps of 0.02, and embedding dimensions of 4, 6, 8, and 16. When a threshold classifier was trained, the RQA variable recurrence was able to correctly classify 94.3% of periods in a test dataset. It was concluded that RQA of IBI data is able to accurately discriminate between infant sleep states. This is a promising step toward development of a minimal-channel automatic sleep state classification system.

  7. Applying Data Envelopment Analysis and Grey Model for the Productivity Evaluation of Vietnamese Agroforestry Industry

    Chia-Nan Wang

    2016-11-01

    Full Text Available Agriculture and forestry play important roles in Vietnam, particularly as they contribute to the creation of food, conservation of forest resources, and improvement of soil fertility. Therefore, understanding the performances of relevant enterprises in this field contributes to the sustainable development of this country’s agroforestry industry. This research proposes a hybrid model, which includes a grey model (GM and a Malmquist productivity index (MPI, to assess the performances of Vietnamese agroforestry enterprises over several time periods. After collecting the data of selected input and output variables for 10 Vietnam agroforestry enterprises in the period of 2011–2014, GM is used to forecast the future values of these input and output variables for the 10 agroforestry enterprises in 2015 and 2016. Following the results of GM, the MPI is used to measure the performance of these enterprises. The MPI scores showed some enterprises will become more efficient, while others will become less efficient. The proposed model gives past–present–future insights in order for decision-makers to sustain agroforestry development in Vietnam. This hybrid approach can be applied to performance analysis of other industries as well.

  8. Regional LLRW [low-level radioactive waste] processing alternatives applying the DOE REGINALT systems analysis model

    Beers, G.H.

    1987-01-01

    The DOE Low-Level Waste Management Progam has developed a computer-based decision support system of models that may be used by nonprogrammers to evaluate a comprehensive approach to commercial low-level radioactive waste (LLRW) management. REGINALT (Regional Waste Management Alternatives Analysis Model) implementation will be described as the model is applied to a hypothetical regional compact for the purpose of examining the technical and economic potential of two waste processing alternaties. Using waste from a typical regional compact, two specific regional waste processing centers will be compared for feasibility. Example 1 will assume will assume that a regional supercompaction facility is being developed for the region. Example 2 will assume that a regional facility with both supercompation and incineration is specified. Both examples will include identical disposal facilities, except that capacity may differ due to variation in volume reduction achieved. The two examples will be compared with regard to volume reduction achieved, estimated occupational exposure for the processing facilities, and life cylcle costs per generated unit waste. A base case will also illustrate current disposal practices. The results of the comparisons will be evaluated, and other steps, if necessary, for additional decision support will be identified

  9. Word maturity indices with latent semantic analysis: why, when, and where is Procrustes rotation applied?

    Jorge-Botana, Guillermo; Olmos, Ricardo; Luzón, José M

    2018-01-01

    The aim of this paper is to describe and explain one useful computational methodology to model the semantic development of word representation: Word maturity. In particular, the methodology is based on the longitudinal word monitoring created by Kirylev and Landauer using latent semantic analysis for the representation of lexical units. The paper is divided into two parts. First, the steps required to model the development of the meaning of words are explained in detail. We describe the technical and theoretical aspects of each step. Second, we provide a simple example of application of this methodology with some simple tools that can be used by applied researchers. This paper can serve as a user-friendly guide for researchers interested in modeling changes in the semantic representations of words. Some current aspects of the technique and future directions are also discussed. WIREs Cogn Sci 2018, 9:e1457. doi: 10.1002/wcs.1457 This article is categorized under: Computer Science > Natural Language Processing Linguistics > Language Acquisition Psychology > Development and Aging. © 2017 Wiley Periodicals, Inc.

  10. Experimental and NMR theoretical methodology applied to geometric analysis of the bioactive clerodane trans-dehydrocrotonin

    Soares, Breno Almeida; Firme, Caio Lima; Maciel, Maria Aparecida Medeiros; Kaiser, Carlos R.; Schilling, Eduardo; Bortoluzzi, Adailton J.

    2014-01-01

    trans-Dehydrocrotonin (t-DCTN) a bioactive 19-nor-diterpenoid clerodane type isolated from Croton cajucara Benth, is one of the most investigated clerodane in the current literature. In this work, a new approach joining X-ray diffraction data, nuclear magnetic resonance (NMR) data and theoretical calculations was applied to the thorough characterization of t-DCTN. For that, the geometry of t-DCTN was reevaluated by X-ray diffraction as well as 1 H and 13 C NMR data, whose geometrical parameters where compared to those obtained from B3LYP/6-311G++(d,p) level of theory. From the evaluation of both calculated and experimental values of 1 H and 13 C NMR chemical shifts and spin-spin coupling constants, it was found very good correlations between theoretical and experimental magnetic properties of t-DCTN. Additionally, the delocalization indexes between hydrogen atoms correlated accurately with theoretical and experimental spin-spin coupling constants. An additional topological analysis from quantum theory of atoms in molecules (QTAIM) showed intramolecular interactions for t-DCTN. (author)

  11. Sedimentology, eruptive mechanism and facies architecture of basaltic scoria cones from the Auckland Volcanic Field (New Zealand)

    Kereszturi, Gábor; Németh, Károly

    2016-09-01

    Scoria cones are a common type of basaltic to andesitic small-volume volcanoes (e.g. 10- 1-10- 5 km3) that results from gas-bubble driven explosive eruptive styles. Although they are small in volume, they can produce complex eruptions, involving multiple eruptive styles. Eight scoria cones from the Quaternary Auckland Volcanic Field in New Zealand were selected to define the eruptive style variability from their volcanic facies architecture. The reconstruction of their eruptive and pyroclastic transport mechanisms was established on the basis of study of their volcanic sedimentology, stratigraphy, and measurement of their pyroclast density, porosity, Scanning Electron Microscopy, 2D particle morphology analysis and Visible and Near Visible Infrared Spectroscopy. Collection of these data allowed defining three end-member types of scoria cones inferred to be constructed from lava-fountaining, transitional fountaining and Strombolian type, and explosive Strombolian type. Using the physical and field-based characteristics of scoriaceous samples a simple generalised facies model of basaltic scoria cones for the AVF is developed that can be extended to other scoria cones elsewhere. The typical AVF scoria cone has an initial phreatomagmatic phases that might reduce the volume of magma available for subsequent scoria cone forming eruptions. This inferred to have the main reason to have decreased cone volumes recognised from Auckland in comparison to other volcanic fields evolved dominantly in dry eruptive condition (e.g. no external water influence). It suggests that such subtle eruptive style variations through a scoria cone evolution need to be integrated into the hazard assessment of a potentially active volcanic field such as that in Auckland.

  12. Uncertainty and Sensitivity Analysis Applied to the Validation of BWR Bundle Thermal-Hydraulic Calculations

    Hernandez-Solis, Augusto

    2010-04-01

    This work has two main objectives. The first one is to enhance the validation process of the thermal-hydraulic features of the Westinghouse code POLCA-T. This is achieved by computing a quantitative validation limit based on statistical uncertainty analysis. This validation theory is applied to some of the benchmark cases of the following macroscopic BFBT exercises: 1) Single and two phase bundle pressure drops, 2) Steady-state cross-sectional averaged void fraction, 3) Transient cross-sectional averaged void fraction and 4) Steady-state critical power tests. Sensitivity analysis is also performed to identify the most important uncertain parameters for each exercise. The second objective consists in showing the clear advantages of using the quasi-random Latin Hypercube Sampling (LHS) strategy over simple random sampling (SRS). LHS allows a much better coverage of the input uncertainties than SRS because it densely stratifies across the range of each input probability distribution. The aim here is to compare both uncertainty analyses on the BWR assembly void axial profile prediction in steady-state, and on the transient void fraction prediction at a certain axial level coming from a simulated re-circulation pump trip scenario. It is shown that the replicated void fraction mean (either in steady-state or transient conditions) has less variability when using LHS than SRS for the same number of calculations (i.e. same input space sample size) even if the resulting void fraction axial profiles are non-monotonic. It is also shown that the void fraction uncertainty limits achieved with SRS by running 458 calculations (sample size required to cover 95% of 8 uncertain input parameters with a 95% confidence), result in the same uncertainty limits achieved by LHS with only 100 calculations. These are thus clear indications on the advantages of using LHS. Finally, the present study contributes to a realistic analysis of nuclear reactors, in the sense that the uncertainties of

  13. Neutron activation analysis applied to the determination of trace elements in human nails

    Aguiar, Amilton Reinaldo

    2001-01-01

    There is a considerable interest in the determination of trace elements in human nails in order to use this tissue as a monitor of nutritional and healthy status of individuals, of occupational exposure diseases and of the environmental contamination. In this work, instrumental neutron activation analysis was applied to determine trace elements in finger nail clippings to make comparisons between the elemental concentrations obtained in nails from healthy individuals of a control group and those from cystic fibrosis (CF) patients. Firstly, a protocol for sample collection and preparation for analysis was established. Finger and toe nail samples from CF patients were collected at the Instituto da Crianca of Medicine School, University of Sao Paulo, SP. The nail samples from control group were collected from healthy adults and from children living in Sao Paulo city, SP. These samples were cleaned by stirring them witha a diluted Triton X100 solution and then by washing with distilled water and acetone. The analytical procedure consisted of irradiation nail samples and elemental standards in the IEA-R1m nuclear reactor under thermal neutro flux of about 10 12 n cm -2 s -1 , for short and long period irradiations. The activities of the radionuclides were measured using a gamma-ray spectrometer comprising an hyperpure Ge detector and associated electronic system. The biological reference materials Bovine Liver 1577b and Oyster Tissue 1566a, both from National Institute of Standards and Technology, USA were analysed in order to evaluate the accuracy and precision of the results. The analysis of variance (ANOVA) and F-test at the significance level of 5% were used to make a comparison between the sets of results obtained in this work. In the comparison of the results obtained for finger and toe nails from CF patients, the Br concentrations were higher in finger nails that those obtained for toe nails. For the control group of children, the finger nails presented different

  14. An Annotated Bibliography of Articles in the "Journal of Speech and Language Pathology-Applied Behavior Analysis"

    Esch, Barbara E.; Forbes, Heather J.

    2017-01-01

    The open-source "Journal of Speech and Language Pathology-Applied Behavior Analysis" ("JSLP-ABA") was published online from 2006 to 2010. We present an annotated bibliography of 80 articles published in the now-defunct journal with the aim of representing its scholarly content to readers of "The Analysis of Verbal…

  15. School-wide PBIS: An Example of Applied Behavior Analysis Implemented at a Scale of Social Importance.

    Horner, Robert H; Sugai, George

    2015-05-01

    School-wide Positive Behavioral Interventions and Supports (PBIS) is an example of applied behavior analysis implemented at a scale of social importance. In this paper, PBIS is defined and the contributions of behavior analysis in shaping both the content and implementation of PBIS are reviewed. Specific lessons learned from implementation of PBIS over the past 20 years are summarized.

  16. Analysis of the Possibility of Required Resources Estimation for Nuclear Power Plant Decommissioning Applying BIM

    Jung, Insu [Korea Institute of construction Technology, Goyang (Korea, Republic of); Kim, Woojung [KHNP-Central Research Institute, Daejeon (Korea, Republic of)

    2014-05-15

    Estimation of decommissioning cost, decommissioning strategy, and decommissioning quantity at the time when entering into any decommissioning plans are some elements whose inputs are mandatory for nuclear power plant decommissioning. Ways to estimate decommissioning of required resources in the past have imposed great uncertainty since they analyze required resources at the construction stage, analyzing and consulting decommissioning required resources of overseas nuclear power plants. This study aims at analyzing whether required resources for decommissioning nuclear power plants can be estimated, applying BIM. To achieve this goal, this study analyzed the status quo of BIM such as definition, characteristics, and areas applied, and made use of them when drawing out study results by examining types and features of the tools realizing BIM. In order to review how BIM could be used for decommissioning nuclear power plants, the definition, characteristics and applied areas of BIM were discussed. BIM designs objects of the structures (walls, slabs, pillars, stairs, windows and doors, etc.) by 3D technology and endows attribute (function, structure and usage) information for each object, thereby providing visualized information of structures for participants in construction projects. Major characteristics of BIM attribute information are as follows: - Geometry: The information of objects is represented by measurable geometric information - Extensible object attributes: Objects include pre-defined attributes, and allow extension of other attributes. Any model that includes these attributes forms relationships with other various attributes in order to perform analysis and simulation. - All information including the attributes are integrated to ensure continuity, accuracy and accessibility, and all information used during the life cycle of structures are supported. This means that when information of required resources is added as another attributes other than geometric

  17. MAPPING OF RESERVOIR PROPERTIES AND FACIES THROUGH INTEGRATION OF STATIC AND DYNAMIC DATA

    Albert C. Reynolds; Dean S. Oliver; Fengjun Zhang; Yannong Dong; Jan Arild Skjervheim; Ning Liu

    2003-01-01

    Knowledge of the distribution of permeability and porosity in a reservoir is necessary for the prediction of future oil production, estimation of the location of bypassed oil, and optimization of reservoir management. But while the volume of data that can potentially provide information on reservoir architecture and fluid distributions has increased enormously in the past decade, it is not yet possible to make use of all the available data in an integrated fashion. While it is relatively easy to generate plausible reservoir models that honor static data such as core, log, and seismic data, it is far more difficult to generate plausible reservoir models that honor dynamic data such as transient pressures, saturations, and flow rates. As a result, the uncertainty in reservoir properties is higher than it could be and reservoir management can not be optimized. The goal of this project is to develop computationally efficient automatic history matching techniques for generating geologically plausible reservoir models which honor both static and dynamic data. Solution of this problem is necessary for the quantification of uncertainty in future reservoir performance predictions and for the optimization of reservoir management. Facies (defined here as regions of relatively uniform petrophysical properties) are common features of all reservoirs. Because the flow properties of the various facies can vary greatly, knowledge of the location of facies boundaries is of utmost importance for the prediction of reservoir performance and for the optimization of reservoir management. When the boundaries between facies are fairly well known, but flow properties are poorly known, the average properties for all facies can be determined using traditional techniques. Traditional history matching honors dynamic data by adjusting petrophysical properties in large areas, but in the process of adjusting the reservoir model ignores the static data and often results in implausible reservoir

  18. Biostratigraphy, facies and sequence stratigraphy of the Sarvak Formation in the Ahwaz Oil Field, North Dezful Embayment Zone

    Mohammad Hasan Kazemzadeh

    2016-08-01

    Full Text Available Paleontological studies lead to recognition of 21 genera and 16 species of benthic foraminifera, 5 genera and 6 species of planktonic foraminifera and 3 genera and 3 species of oligosteginids. The vertical distribution of fauna lead to identification of 5 biozones including: Favusella washitensis Range Zone, Oligostegina Assemblage Zone, Rudist debris Zone, Nezzazata-Alveolinids Assemblage Zone, Nezzazatinella-Dicyclina Assemblage Zone. Based on the indicated biozones, the age of the Sarvak Formation is Late Albian to Early Turonian in the study area. Eleven carbonate facies belonging to four environments including tidal flat, restricted and semi-restricted lagoon, shoal and open marine are recognized. The identified facies are deposited on the homoclinal ramp setting. Based on the vertical changes of facies and recognized depositional environments, four third-order depositional sequences are represented. The transgressive systems tracts mainly comprises of open marine facies including sponge spicule, oligosteginid, echinoid and benthic foraminifera, while the highstand systems tracts mainly consists of shoal facies rich in bioclast, and restricted and semi-restricted lagoon facies rich in porcellaneous and hyaline benthic foraminifera and peloid. The maximum flooding surface represented by open marine facies including echinoid and planktonic foraminifera

  19. Further Insight and Additional Inference Methods for Polynomial Regression Applied to the Analysis of Congruence

    Cohen, Ayala; Nahum-Shani, Inbal; Doveh, Etti

    2010-01-01

    In their seminal paper, Edwards and Parry (1993) presented the polynomial regression as a better alternative to applying difference score in the study of congruence. Although this method is increasingly applied in congruence research, its complexity relative to other methods for assessing congruence (e.g., difference score methods) was one of the…

  20. Towards an Analysis of Review Article in Applied Linguistics: Its Classes, Purposes and Characteristics

    Azar, Ali Sorayyaei; Hashim, Azirah

    2014-01-01

    The classes, purposes and characteristics associated with the review article in the field of applied linguistics were analyzed. The data were collected from a randomly selected corpus of thirty two review articles from a discipline-related key journal in applied linguistics. The findings revealed that different sub-genres can be identified within…

  1. Linear and nonlinear stability analysis in BWRs applying a reduced order model

    Olvera G, O. A.; Espinosa P, G.; Prieto G, A., E-mail: omar_olverag@hotmail.com [Universidad Autonoma Metropolitana, Unidad Iztapalapa, San Rafael Atlixco No. 186, Col. Vicentina, 09340 Ciudad de Mexico (Mexico)

    2016-09-15

    Boiling Water Reactor (BWR) stability studies are generally conducted through nonlinear reduced order models (Rom) employing various techniques such as bifurcation analysis and time domain numerical integration. One of those models used for these studies is the March-Leuba Rom. Such model represents qualitatively the dynamic behavior of a BWR through a one-point reactor kinetics, a one node representation of the heat transfer process in fuel, and a two node representation of the channel Thermal hydraulics to account for the void reactivity feedback. Here, we study the effect of this higher order model on the overall stability of the BWR. The change in the stability boundaries is determined by evaluating the eigenvalues of the Jacobian matrix. The nonlinear model is also integrated numerically to show that in the nonlinear region, the system evolves to stable limit cycles when operating close to the stability boundary. We also applied a new technique based on the Empirical Mode Decomposition (Emd) to estimate a parameter linked with stability in a BWR. This instability parameter is not exactly the classical Decay Ratio (Dr), but it will be linked with it. The proposed method allows decomposing the analyzed signal in different levels or mono-component functions known as intrinsic mode functions (Imf). One or more of these different modes can be associated to the instability problem in BWRs. By tracking the instantaneous frequencies (calculated through Hilbert Huang Transform (HHT) and the autocorrelation function (Acf) of the Imf linked to instability. The estimation of the proposed parameter can be achieved. The current methodology was validated with simulated signals of the studied model. (Author)

  2. Environment-oriented life cycle analysis of bulk materials, applied in solar cell systems

    Geelen, H.

    1994-04-01

    In the solar cell technology several bulk materials (glass, steel, aluminium, concrete, copper, zinc and synthetic materials) are applied intensively. By means of a life cycle analysis (LCA) the environmental effects and bottlenecks of the use of these materials is investigated in this report. Also attention is paid to the options to reduce the environmental effects of photovoltaic (PV) systems by changing processes and/or by redesign of the PV systems. Two systems are studied: solar cells, integrated in pitched roofs, and solar cells on the ground in solar cell arrays. The study is focused on the use of bulk materials in the solar module, the cables and the supporting construction. After brief introductions on the environment-oriented LCA method, the standard construction of PV modules and the principles of solar cells, an overview is given of the present and future material input for the above-mentioned PV-systems. Next, attention is paid to the energy consumption and the most important emissions of the production of the bulk materials. Based on these data three environmental effect scores of the PV systems are calculated and analyzed: the energy consumption, the greenhouse effect or global warming equivalent, and the acidifying effect or acidification equivalent. Also a fourth effect, for which the so-called environmental indicator human toxicity is defined, is described. By means of this indicator the hazardous effects for the public health can be indicated. The sum of the four indicators is a measure for the environmental profile of the roof PV-system and the ground PV-array system. Recommendations are given by which the systems and their environmental profiles can be improved. 29 figs., 50 tabs., 5 appendices, refs

  3. Quasi-dynamic Material Flow Analysis applied to the Austrian Phosphorus cycle

    Zoboli, Ottavia; Rechberger, Helmut

    2013-04-01

    Phosphorus (P) is one of the key elements that sustain life on earth and that allow achieving the current high levels of food production worldwide. It is a non-renewable resource, without any existing substitute. Because of its current dissipative use by mankind and to its very slow geochemical cycle, this resource is rapidly depleting and it is strongly connected to the problem of ensuring food security. Moreover P is also associated to important environmental problems. Its extraction often generates hazardous wastes, while its accumulation in water bodies can lead to eutrophication, with consequent severe ecological damages. It is therefore necessary to analyze and understand in detail the system of P, in regard to its use and management, to identify the processes that should be targeted in order to reduce the overall consumption of this resource. This work aims at establishing a generic quasi-dynamic model, which describes the Austrian P-budget and which allows investigating the trends of P use in the past, but also selected future scenarios. Given the importance of P throughout the whole anthropogenic metabolism, the model is based on a comprehensive system that encompasses several economic sectors, from agriculture and animal husbandry to industry, consumption and waste and wastewater treatment. Furthermore it includes the hydrosphere, to assess the losses of P into water bodies, due to the importance of eutrophication problems. The methodology applied is Material Flow Analysis (MFA), which is a systemic approach to assess and balance the stocks and flows of a material within a system defined in space and time. Moreover the model is integrated in the software STAN, a freeware tailor-made for MFA. Particular attention is paid to the characteristics and the quality of the data, in order to include data uncertainty and error propagation in the dynamic balance.

  4. Item response theory analysis applied to the Spanish version of the Personal Outcomes Scale.

    Guàrdia-Olmos, J; Carbó-Carreté, M; Peró-Cebollero, M; Giné, C

    2017-11-01

    The study of measurements of quality of life (QoL) is one of the great challenges of modern psychology and psychometric approaches. This issue has greater importance when examining QoL in populations that were historically treated on the basis of their deficiency, and recently, the focus has shifted to what each person values and desires in their life, as in cases of people with intellectual disability (ID). Many studies of QoL scales applied in this area have attempted to improve the validity and reliability of their components by incorporating various sources of information to achieve consistency in the data obtained. The adaptation of the Personal Outcomes Scale (POS) in Spanish has shown excellent psychometric attributes, and its administration has three sources of information: self-assessment, practitioner and family. The study of possible congruence or incongruence of observed distributions of each item between sources is therefore essential to ensure a correct interpretation of the measure. The aim of this paper was to analyse the observed distribution of items and dimensions from the three Spanish POS information sources cited earlier, using the item response theory. We studied a sample of 529 people with ID and their respective practitioners and family member, and in each case, we analysed items and factors using Samejima's model of polytomic ordinal scales. The results indicated an important number of items with differential effects regarding sources, and in some cases, they indicated significant differences in the distribution of items, factors and sources of information. As a result of this analysis, we must affirm that the administration of the POS, considering three sources of information, was adequate overall, but a correct interpretation of the results requires that it obtain much more information to consider, as well as some specific items in specific dimensions. The overall ratings, if these comments are considered, could result in bias. © 2017

  5. Preliminary risk analysis applied to the handling of health-care waste

    Carvalho S.M.L.

    2002-01-01

    Full Text Available Between 75% and 90% of the waste produced by health-care providers no risk or is "general" health-care waste, comparable to domestic waste. The remaining 10-25% of health-care waste is regarded as hazardous due to one or more of the following characteristics: it may contain infectious agents, sharps, toxic or hazardous chemicals or it may be radioactive. Infectious health-care waste, particularly sharps, has been responsible for most of the accidents reported in the literature. In this work the preliminary risks analysis (PRA technique was used to evaluate practices in the handling of infectious health-care waste. Currently the PRA technique is being used to identify and to evaluate the potential for hazard of the activities, products, and services from facilities and industries. The system studied was a health-care establishment which has handling practices for infectious waste. Thirty-six procedures related to segregation, containment, internal collection, and storage operation were analyzed. The severity of the consequences of the failure (risk that can occur from careless management of infectious health-care waste was classified into four categories: negligible, marginal, critical, and catastrophic. The results obtained in this study showed that events with critics consequences, about 80%, may occur during the implementation of the containment operation, suggesting the need to prioritize this operation. As a result of the methodology applied in this work, a flowchart the risk series was also obtained. In the flowchart the events that can occur as a consequence of a improper handling of infectious health-care waste, which can cause critical risks such as injuries from sharps and contamination (infection from pathogenic microorganisms, are shown.

  6. New methods applied to the analysis and treatment of ovarian cancer

    Order, S.E.; Rosenshein, N.B.; Klein, J.L.; Lichter, A.S.; Ettinger, D.S.; Dillon, M.B.; Leibel, S.A.

    1979-01-01

    The development of rigorous staging methods, appreciation of new knowledge concerning ovarian cancer dissemination, and administration of new treatment techniques have been applied to ovarian cancer. The method of staging consists of peritoneal cytology, total abdominal hysterectomy-bilateral salpingo oophorectomy (TAH-BSO), omentectomy, nodal biopsy, diaphragmatic inspection and is coupled with maximal surgical resection. An additional examination being evaluated for usefulness in future staging is intraperitoneal /sup 99m/Tc sulfur colloid scans. Nineteen patients have entered the pilot studies. Sixteen patients (5 Stage 2, 10 Stage 3 micrometastatic, and 1 Stage 4) have been treated with colloidal 32 P, i.p. followed 2 weeks later by split abdominal irradiation (200 rad fractions pelvis-2 hr rest-150 rad upper abdomen) to a total abdominal dose of 3000 rad with a pelvic cone down to 4000 rad. Five of these patients received Phenylalanine mustard (L-PAM) (7 mg/m 2 ) maintenance therapy. The 3 year actuarial survival was 78% and the 3 year disease free actuarial survival 68%. Seven patients were treated with intraperitoneal tumor antisera and 4/7 remain in complete remission as of this writing. The specificity of the antiserum has been demonstrated by immunoelectrophoresis in 4/4 patients, and by live cell fluorescence in 1 patient. Rabbit IgG levels revealed significant increasing titers in 4/6 patients following i.p. antiovarian antiserum. Radiolabeled IgG derived from the antiserum demonstrated tumor localization and correlation with conventional radiograhy and computerized axial tomograhy (CAT) scans in 2 patients studied to date. Biomarker analysis reveals that free secretory protein 6/6, apha globulin 5/6, and CEA (carcinoembryonic antigen) 3/6 were elevated in the 6 patients studied. Two patients whose disease progressed demonstrated elevated levels of all three biomarkers

  7. Applied behavior analysis: behavior management of children with autism spectrum disorders in dental environments.

    Hernandez, Purnima; Ikkanda, Zachary

    2011-03-01

    There are a limited number of studies addressing behavior management techniques and procedural modifications that dentists can use to treat people with an autism spectrum disorder (ASD). The authors conducted a search of the dental and behavioral analytic literature to identify management techniques that address problem behaviors exhibited by children with ASDs in dental and other health-related environments. Applied behavior analysis (ABA) is a science in which procedures are based on the principles of behavior through systematic experimentation. Clinicians have used ABA procedures successfully to modify socially significant behaviors of people with ASD. Basic behavior management techniques currently used in dentistry may not encourage people with cognitive and behavioral disabilities, such as ASD, to tolerate simple in-office dental procedures consistently. Instead, dental care providers often are required to use advanced behavior management techniques to complete simple in-office procedures such as prophylaxis, sealant placement and obtaining radiographs. ABA procedures can be integrated in the dental environment to manage problem behaviors often exhibited by children with an ASD. The authors found no evidence-based procedural modifications that address the behavioral characteristics and problematic behaviors of children with an ASD in a dental environment. Further research in this area should be conducted. Knowledge and in-depth understanding of behavioral principles is essential when a dentist is concerned with modifying behaviors. Using ABA procedures can help dentists manage problem behaviors effectively and systematically when performing routine dental treatment. Being knowledgeable about each patient's behavioral characteristics and the parents' level of involvement is important in the successful integration of the procedures and reduction of in-office time.

  8. Linear and nonlinear stability analysis in BWRs applying a reduced order model

    Olvera G, O. A.; Espinosa P, G.; Prieto G, A.

    2016-09-01

    Boiling Water Reactor (BWR) stability studies are generally conducted through nonlinear reduced order models (Rom) employing various techniques such as bifurcation analysis and time domain numerical integration. One of those models used for these studies is the March-Leuba Rom. Such model represents qualitatively the dynamic behavior of a BWR through a one-point reactor kinetics, a one node representation of the heat transfer process in fuel, and a two node representation of the channel Thermal hydraulics to account for the void reactivity feedback. Here, we study the effect of this higher order model on the overall stability of the BWR. The change in the stability boundaries is determined by evaluating the eigenvalues of the Jacobian matrix. The nonlinear model is also integrated numerically to show that in the nonlinear region, the system evolves to stable limit cycles when operating close to the stability boundary. We also applied a new technique based on the Empirical Mode Decomposition (Emd) to estimate a parameter linked with stability in a BWR. This instability parameter is not exactly the classical Decay Ratio (Dr), but it will be linked with it. The proposed method allows decomposing the analyzed signal in different levels or mono-component functions known as intrinsic mode functions (Imf). One or more of these different modes can be associated to the instability problem in BWRs. By tracking the instantaneous frequencies (calculated through Hilbert Huang Transform (HHT) and the autocorrelation function (Acf) of the Imf linked to instability. The estimation of the proposed parameter can be achieved. The current methodology was validated with simulated signals of the studied model. (Author)

  9. Uncertainty propagation analysis applied to volcanic ash dispersal at Mt. Etna by using a Lagrangian model

    de'Michieli Vitturi, Mattia; Pardini, Federica; Spanu, Antonio; Neri, Augusto; Vittoria Salvetti, Maria

    2015-04-01

    Volcanic ash clouds represent a major hazard for populations living nearby volcanic centers producing a risk for humans and a potential threat to crops, ground infrastructures, and aviation traffic. Lagrangian particle dispersal models are commonly used for tracking ash particles emitted from volcanic plumes and transported under the action of atmospheric wind fields. In this work, we present the results of an uncertainty propagation analysis applied to volcanic ash dispersal from weak plumes with specific focus on the uncertainties related to the grain-size distribution of the mixture. To this aim, the Eulerian fully compressible mesoscale non-hydrostatic model WRF was used to generate the driving wind, representative of the atmospheric conditions occurring during the event of November 24, 2006 at Mt. Etna. Then, the Lagrangian particle model LPAC (de' Michieli Vitturi et al., JGR 2010) was used to simulate the transport of mass particles under the action of atmospheric conditions. The particle motion equations were derived by expressing the Lagrangian particle acceleration as the sum of the forces acting along its trajectory, with drag forces calculated as a function of particle diameter, density, shape and Reynolds number. The simulations were representative of weak plume events of Mt. Etna and aimed to quantify the effect on the dispersal process of the uncertainty in the particle sphericity and in the mean and variance of a log-normal distribution function describing the grain-size of ash particles released from the eruptive column. In order to analyze the sensitivity of particle dispersal to these uncertain parameters with a reasonable number of simulations, and therefore with affordable computational costs, response surfaces in the parameter space were built by using the generalized polynomial chaos technique. The uncertainty analysis allowed to quantify the most probable values, as well as their pdf, of the number of particles as well as of the mean and

  10. Felsic granulite with layers of eclogite facies rocks in the Bohemian Massif; did they share a common metamorphic history?

    Jedlicka, Radim; Faryad, Shah Wali

    2017-08-01

    High pressure granulite and granulite gneiss from the Rychleby Mountains in the East Sudetes form an approximately 7 km long and 0.8 km wide body, which is enclosed by amphibolite facies orthogneiss with a steep foliation. Well preserved felsic granulite is located in the central part of the body, where several small bodies of mafic granulite are also present. In comparison to other high pressure granulites in the Bohemian Massif, which show strong mineral and textural re-equilibration under granulite facies conditions, the mafic granulite samples preserve eclogite facies minerals (garnet, omphacite, kyanite, rutile and phengite) and their field and textural relations indicate that both mafic and felsic granulites shared common metamorphic history during prograde eclogite facies and subsequent granulite facies events. Garnet from both granulite varieties shows prograde compositional zoning and contains inclusions of phengite. Yttrium and REEs in garnet show typical bell-shaped distributions with no annular peaks near the grain rims. Investigation of major and trace elements zoning, including REEs distribution in garnet, was combined with thermodynamic modelling to constrain the early eclogite facies metamorphism and to estimate pressure-temperature conditions of the subsequent granulite facies overprint. The first (U)HP metamorphism occurred along a low geothermal gradient in a subduction-related environment from its initial stage at 0.8 GPa/460 °C and reached pressures up to 2.5 GPa at 550 °C. The subsequent granulite facies overprint (1.6-1.8 GPa/800-880 °C) affected the rocks only partially; by replacement of omphacite into diopside + plagioclase symplectite and by compositional modification of garnet rims. The mineral textures and the preservation of the eclogite facies prograde compositional zoning in garnet cores confirm that the granulite facies overprint was either too short or too faint to cause recrystallisation and homogenisation of the eclogite

  11. Mustiscaling Analysis applied to field Water Content through Distributed Fiber Optic Temperature sensing measurements

    Benitez Buelga, Javier; Rodriguez-Sinobas, Leonor; Sanchez, Raul; Gil, Maria; Tarquis, Ana M.

    2014-05-01

    signal variation, or to see at which scales signals are most correlated. This can give us an insight into the dominant processes An alternative to both of the above methods has been described recently. Relative entropy and increments in relative entropy has been applied in soil images (Bird et al., 2006) and in soil transect data (Tarquis et al., 2008) to study scale effects localized in scale and provide the information that is complementary to the information about scale dependencies found across a range of scales. We will use them in this work to describe the spatial scaling properties of a set of field water content data measured in an extension of a corn field, in a plot of 500 m2 and an spatial resolution of 25 cm. These measurements are based on an optics cable (BruggSteal) buried on a ziz-zag deployment at 30cm depth. References Bird, N., M.C. Díaz, A. Saa, and A.M. Tarquis. 2006. A review of fractal and multifractal analysis of soil pore-scale images. J. Hydrol. 322:211-219. Kravchenko, A.N., R. Omonode, G.A. Bollero, and D.G. Bullock. 2002. Quantitative mapping of soil drainage classes using topographical data and soil electrical conductivity. Soil Sci. Soc. Am. J. 66:235-243. Lark, R.M., A.E. Milne, T.M. Addiscott, K.W.T. Goulding, C.P. Webster, and S. O'Flaherty. 2004. Scale- and location-dependent correlation of nitrous oxide emissions with soil properties: An analysis using wavelets. Eur. J. Soil Sci. 55:611-627. Lark, R.M., S.R. Kaffka, and D.L. Corwin. 2003. Multiresolution analysis of data on electrical conductivity of soil using wavelets. J. Hydrol. 272:276-290. Lark, R. M. and Webster, R. 1999. Analysis and elucidation of soil variation using wavelets. European J. of Soil Science, 50(2): 185-206. Mandelbrot, B.B. 1982. The fractal geometry of nature. W.H. Freeman, New York. Percival, D.B., and A.T. Walden. 2000. Wavelet methods for time series analysis. Cambridge Univ. Press, Cambridge, UK. Tarquis, A.M., N.R. Bird, A.P. Whitmore, M.C. Cartagena, and

  12. Analysis of design parameters for crosstalk cancellation filters applied to different loudspeaker configurations

    Lacouture Parodi, Yesenia; Rubak, Per

    2011-01-01

    for crosstalk cancellation filters applied to different loudspeaker configurations has not yet been addressed systematically. A study of three different inversion techniques applied to several loudspeaker arrangements is documented. Least-squares approximations in the frequency and time domains are evaluated...... along with a crosstalk canceler based on minimum-phase approximation with a frequency-independent delay. The three methods were applied to loudspeaker configurations with two channels and the least-squares approaches to configurations with four channels. Several different span angles and elevations were...

  13. Mid amphibolite facies metamorphism of harzburgites in the Neoproterozoic Cerro Mantiqueiras Ophiolite, southernmost Brazil

    HARTMANN LÉO A.

    2003-01-01

    Full Text Available Valuable information is retrieved from the integrated investigation of the field relationships, microstructure and mineral compositions of harzburgites from the Neoproterozoic Cerro Mantiqueiras Ophiolite. This important tectonic marker of the geological evolution of southernmost Brazilian Shield was thoroughly serpentinized during progressive metamorphism, because the oldest mineral assemblage is: olivine + orthopyroxene + tremolite + chlorite + chromite. This M1 was stabilized in mid amphibolite facies - 550-600ºC as calculated from mineral equilibria. No microstructural (e.g. ductile deformation of olivine or chromite or compositional (e.g. mantle spinel remnant of mantle history was identified. A metamorphic event M2 occurred in the low amphibolite facies along 100 m-wide shear zones, followed by intense serpentinization (M3 and narrow 1-3 m-wide shear zones (M4 containing asbestos.

  14. Marine and fluvial facies modelling at petroleum reservoir scale; Modelisation des heterogeneites lithologiques a l'echelle du reservoir petrolier en milieu marin et fluviatile

    Leflon, B.

    2005-10-15

    When modelling a petroleum reservoir, well data are very useful to model properties at a sub-seismic scale. Petrophysical properties like porosity or permeability are linked to the rock-type. Two methods based on well data have been developed to model facies. The first one is used to model marine carbonates deposits. The geometry of sedimentary layers is modelled through a special parameterization of the reservoir similar to Wheeler space. The time parameter is defined along the well paths thanks to correlations. The layer thickness is then extrapolated between wells. A given relationship between facies and bathymetry of sedimentation makes it possible to compute bathymetry along the well paths. Bathymetry is then extrapolated from wells and a reference map using the concept of accommodation. The model created this way is stratigraphically consistent. Facies simulation can then be constrained by the computed bathymetry. The second method describes a novel approach to fluvial reservoirs modelling. The core of the method lies in the association of a fairway with the channels to be simulated. Fairways are positioned so that all data are taken in account; they can be stochastic if unknown or explicitly entered if identified on seismic data. A potential field is defined within the fairway. Specifying a transfer function to map this potential field to thickness results in generating a channel inside the fairway. A residual component is stochastically simulated and added to the potential field creating realistic channel geometries. Conditioning to well data is obtained by applying the inverse transfer function at the data location to derive thickness values that will constrain the simulation of residuals. (author)

  15. Genetic algorithm applied to a Soil-Vegetation-Atmosphere system: Sensitivity and uncertainty analysis

    Schneider, Sébastien; Jacques, Diederik; Mallants, Dirk

    2010-05-01

    the inversion procedure a genetical algorithm (GA) was used. Specific features such as elitism, roulette-wheel process for selection operator and island theory were implemented. Optimization was based on the water content measurements recorded at several depths. Ten scenarios have been elaborated and applied on the two lysimeters in order to investigate the impact of the conceptual model in terms of processes description (mechanistic or compartmental) and geometry (number of horizons in the profile description) on the calibration accuracy. Calibration leads to a good agreement with the measured water contents. The most critical parameters for improving the goodness of fit are the number of horizons and the type of process description. Best fit are found for a mechanistic model with 5 horizons resulting in absolute differences between observed and simulated water contents less than 0.02 cm3cm-3 in average. Parameter estimate analysis shows that layers thicknesses are poorly constrained whereas hydraulic parameters are much well defined.

  16. Multi-decadal analysis of root-zone soil moisture applying the exponential filter across CONUS

    K. J. Tobin

    2017-09-01

    Full Text Available This study applied the exponential filter to produce an estimate of root-zone soil moisture (RZSM. Four types of microwave-based, surface satellite soil moisture were used. The core remotely sensed data for this study came from NASA's long-lasting AMSR-E mission. Additionally, three other products were obtained from the European Space Agency Climate Change Initiative (CCI. These datasets were blended based on all available satellite observations (CCI-active, CCI-passive, and CCI-combined. All of these products were 0.25° and taken daily. We applied the filter to produce a soil moisture index (SWI that others have successfully used to estimate RZSM. The only unknown in this approach was the characteristic time of soil moisture variation (T. We examined five different eras (1997–2002; 2002–2005; 2005–2008; 2008–2011; 2011–2014 that represented periods with different satellite data sensors. SWI values were compared with in situ soil moisture data from the International Soil Moisture Network at a depth ranging from 20 to 25 cm. Selected networks included the US Department of Energy Atmospheric Radiation Measurement (ARM program (25 cm, Soil Climate Analysis Network (SCAN; 20.32 cm, SNOwpack TELemetry (SNOTEL; 20.32 cm, and the US Climate Reference Network (USCRN; 20 cm. We selected in situ stations that had reasonable completeness. These datasets were used to filter out periods with freezing temperatures and rainfall using data from the Parameter elevation Regression on Independent Slopes Model (PRISM. Additionally, we only examined sites where surface and root-zone soil moisture had a reasonably high lagged r value (r > 0. 5. The unknown T value was constrained based on two approaches: optimization of root mean square error (RMSE and calculation based on the normalized difference vegetation index (NDVI value. Both approaches yielded comparable results; although, as to be expected, the optimization approach generally

  17. National youth sedentary behavior and physical activity daily patterns using latent class analysis applied to accelerometry.

    Evenson, Kelly R; Wen, Fang; Hales, Derek; Herring, Amy H

    2016-05-03

    Applying latent class analysis (LCA) to accelerometry can help elucidated underlying patterns. This study described the patterns of accelerometer-determined sedentary behavior and physical activity among youth by applying LCA to a nationally representative United States (US) sample. Using 2003-2006 National Health and Nutrition Examination Survey data, 3998 youths 6-17 years wore an ActiGraph 7164 accelerometer for one week, providing > =3 days of wear for > =8 h/day from 6:00 am-midnight. Cutpoints defined sedentary behavior ( = 2296 counts/minute), and vigorous activity (> = 4012 counts/minute). To account for wear time differences, outcomes were expressed as percent of day in a given intensity. LCA was used to classify daily (Monday through Sunday) patterns of average counts/minute, sedentary behavior, light activity, MVPA, and vigorous activity separately. The latent classes were explored overall and by age (6-11, 12-14, 15-17 years), gender, and whether or not youth attended school during measurement. Estimates were weighted to account for the sampling frame. For average counts/minute/day, four classes emerged from least to most active: 40.9% of population (mean 323.5 counts/minute/day), 40.3% (559.6 counts/minute/day), 16.5% (810.0 counts/minute/day), and 2.3% (1132.9 counts/minute/day). For percent of sedentary behavior, four classes emerged: 13.5% of population (mean 544.6 min/day), 30.1% (455.1 min/day), 38.5% (357.7 min/day), and 18.0% (259.2 min/day). For percent of light activity, four classes emerged: 12.3% of population (mean 222.6 min/day), 29.3% (301.7 min/day), 41.8% (384.0 min/day), and 16.6% (455.5 min/day). For percent of MVPA, four classes emerged: 59.9% of population (mean 25.0 min/day), 33.3% (60.9 min/day), 3.1% (89.0 min/day), and 3.6% (109.3 min/day). For percent of vigorous activity, three classes emerged: 76.8% of population (mean 7.1 min/day), 18.5% (23.9 min/day), and 4.7% (47.4 min/day). Classes were developed by age

  18. Zircon ages in granulite facies rocks: decoupling from geochemistry above 850 °C?

    Kunz, Barbara E.; Regis, Daniele; Engi, Martin

    2018-03-01

    Granulite facies rocks frequently show a large spread in their zircon ages, the interpretation of which raises questions: Has the isotopic system been disturbed? By what process(es) and conditions did the alteration occur? Can the dates be regarded as real ages, reflecting several growth episodes? Furthermore, under some circumstances of (ultra-)high-temperature metamorphism, decoupling of zircon U-Pb dates from their trace element geochemistry has been reported. Understanding these processes is crucial to help interpret such dates in the context of the P-T history. Our study presents evidence for decoupling in zircon from the highest grade metapelites (> 850 °C) taken along a continuous high-temperature metamorphic field gradient in the Ivrea Zone (NW Italy). These rocks represent a well-characterised segment of Permian lower continental crust with a protracted high-temperature history. Cathodoluminescence images reveal that zircons in the mid-amphibolite facies preserve mainly detrital cores with narrow overgrowths. In the upper amphibolite and granulite facies, preserved detrital cores decrease and metamorphic zircon increases in quantity. Across all samples we document a sequence of four rim generations based on textures. U-Pb dates, Th/U ratios and Ti-in-zircon concentrations show an essentially continuous evolution with increasing metamorphic grade, except in the samples from the granulite facies, which display significant scatter in age and chemistry. We associate the observed decoupling of zircon systematics in high-grade non-metamict zircon with disturbance processes related to differences in behaviour of non-formula elements (i.e. Pb, Th, U, Ti) at high-temperature conditions, notably differences in compatibility within the crystal structure.

  19. Regional facies variations in the Vempalle formation of Cuddapah Basin: implications on uranium exploration

    Rajaraman, H.S.; Mukundhan, A.R.; Ramesh Kumar, K.; Achar, K.K.; Umamaheswar, K.

    2012-01-01

    Strata-bound large tonnage uranium deposit hosted by the Grey-impure-dolostone of Vempalle Formation of Cuddapah Basin is known in Tummalapalle-Rachakuntapalle sector. Deposition of rocks of Cuddapah Basin commenced with Papaghni Group, which comprises Clastic - Gulcheru Formation and Chemogenic - Vempalle Formation. The Vempalle Formation is developed over 280 km stretch from south to north along the western margin of Cuddapah Basin with maximum thickness of about 2.1 km. Recent studies helped in classifying the Vempalle Formation into five major lithofacies viz. Massive Dolostone, Conglomerate, Grey-impure-dolostone (host rock for uranium mineralization), Purple shale and Cherty Dolostone. The lithofacies studies along selected traverses from Tummalapalle in south to Dhone in north revealed the development of all five facies upto Narpala near Chitravati River whereas towards its north, the Grey-impure-dolostone and Cherty Dolostone dominate. The study also revealed over lapping nature of Cherty Dolostone in North of Nossam-Peddapaya lineament; where it directly rests above the Gulcheru Formation. Environment of deposition for these facies of Vempalle Formation place this in a Shallowing-upward carbonate depositional system with characteristic tidal flat environment. The Grey-impure-dolostone facies hosting uranium is interpreted to be developed in Supratidal environment with a narrow pH range of 7.0 - 7.5 in a reducing environment along with precipitation of phosphate. Since the tidal flats have later extension over several kilometers, favorable environment of Grey-impure-dolostone may exist over wide area in northern part also. The search for Grey-impure-dolostone hosted uranium, therefore has a bearing an understanding the regional facies variations in Vempalle Formation. The paper presents the studies carried out in this direction and results thereof. (author)

  20. Facies and sedimentary series in the La Camocha Carboniferous, (Gijon, NW Spain)

    Corrales, I; Flor, G; Pello, J; Peon, A

    1985-01-01

    The Carboniferous of La Camocha Mine consists mainly of terrigenous facies belonging to a fluvial-dominated delta system. Occasionally, as a consequence of avulsion, the area is abandoned by the distributary channels; it gives occasion for some quick marine transgression, the sediments of which being of carbonate character. This situation occurs in the lower part of the studied succession; the upper one is characterised only by sediments of the delta plain environments. 12 references.

  1. The use of anion geochemistry in mapping groundwater facies in the ...

    The groundwater system of the Port Harcourt area is home to three anion facies, the Cl – SO4, the Cl – SO4 – HCO3 and the HCO3 – Cl – SO4. The first two types exist in both shallow – and deep – groundwater environments while the third is restricted to the deep environment. Although there are natural intermittent and, ...

  2. Is Applied Behavior Analysis Ready for Parapsychology? A Return to Natural Events.

    Ruben, Douglas H.; Ruben, Marilyn J.

    1985-01-01

    Argues for the application of behavioral methods including natural observations over reification in parapsychological research. Research methodology stressing the importance of observation, replication, and continuity in applied science is discussed. (Author/BL)

  3. Applying tradable permits to biodiversity conservation: A conceptual analysis of trading rules

    Wissel, Silvia; Wätzold, Frank

    2008-01-01

    Tradable permits have already been applied in many areas of environmental policy and may be a possible response to increasing calls for flexible conservation instruments which are able to successfully conserve biodiversity while allowing for economic development. The idea behind applying tradable permits to conservation is that developers wishing to turn land to economic purposes, thereby destroying valuable habitat, may only do so if they submit a permit to the conservation agency showing th...

  4. Tacuari formation (Nov. Nom.): Lithostratigraphy, facies, environment, age and geological significance (Cerro Largo - Uruguay)

    Veroslavsky, G.; De Santa Ana, H.; Daners, G.

    2006-01-01

    The definition of the Tacuari formation is proposed to group a set of glacial and fossiliferous siliciclastic rock deposited during the Upper proterozoic in the northeast of Uruguay. Up to this paper these lithologies were included in the San Gregorio formation (Carboniferous - Permian - Norte Basin). However, Leiosphaeridia tenuissima, L, minutissima, Myxcocooides distola, M, siderophila, Soldadophycus bossil and S. major were recorded in these rocks.This finded motivated the accomplishment of geological surveys that allowed to ferify the glacial origin of the Tacuari formation, to define its stratigraphic relationships and to corroborate its affectation by the Sierra Ballena shear zone. Two association of facies were recognized in the Tacuari formation: the base is represented by facies association A (outwash plains), characterized diamictites, sandostones and pelites; at the top, the facies association B (glaciomarine) includes a package of rhythmites with dropstones. On account of the tectonic setting, nature of sedimentation, age, and fossils, the definition of Tacuari formation constitutes a novel contribution to the regional evolutionary model of the Upper proterozoic. discussion of posible stratigraphc correlations with other neoproterozoic units of Western wondwana is also attempted

  5. In defence of moral imperialism: four equal and universal prima facie principles.

    Dawson, A; Garrard, E

    2006-04-01

    Raanan Gillon is a noted defender of the four principles approach to healthcare ethics. His general position has always been that these principles are to be considered to be both universal and prima facie in nature. In recent work, however, he has made two claims that seem to present difficulties for this view. His first claim is that one of these four principles, respect for autonomy, has a special position in relation to the others: he holds that it is first among equals. We argue that this claim makes little sense if the principles are to retain their prima facie nature. His second claim is that cultural variation can play an independent normative role in the construction of our moral judgments. This, he argues, enables us to occupy a middle ground between what he sees as the twin pitfalls of moral relativism and (what he calls) moral imperialism. We argue that there is no such middle ground, and while Gillon ultimately seems committed to relativism, it is some form of moral imperialism (in the form of moral objectivism) that will provide the only satisfactory construal of the four principles as prima facie universal moral principles.

  6. Toward a Technology of Derived Stimulus Relations: An Analysis of Articles Published in the "Journal of Applied Behavior Analysis," 1992-2009

    Rehfeldt, Ruth Anne

    2011-01-01

    Every article on stimulus equivalence or derived stimulus relations published in the "Journal of Applied Behavior Analysis" was evaluated in terms of characteristics that are relevant to the development of applied technologies: the type of participants, settings, procedure automated vs. tabletop), stimuli, and stimulus sensory modality; types of…

  7. Comparative analysis of several sediment transport formulations applied to dam-break flows over erodible beds

    Cea, Luis; Bladé, Ernest; Corestein, Georgina; Fraga, Ignacio; Espinal, Marc; Puertas, Jerónimo

    2014-05-01

    Transitory flows generated by dam failures have a great sediment transport capacity, which induces important morphological changes on the river topography. Several studies have been published regarding the coupling between the sediment transport and hydrodynamic equations in dam-break applications, in order to correctly model their mutual interaction. Most of these models solve the depth-averaged shallow water equations to compute the water depth and velocity. On the other hand, a wide variety of sediment transport formulations have been arbitrarily used to compute the topography evolution. These are based on semi-empirical equations which have been calibrated under stationary and uniform conditions very different from those achieved in dam-break flows. Soares-Frazao et al. (2012) proposed a Benchmark test consisting of a dam-break over a mobile bed, in which several teams of modellers participated using different numerical models, and concluded that the key issue which still needs to be investigated in morphological modelling of dam-break flows is the link between the solid transport and the hydrodynamic variables. This paper presents a comparative analysis of different sediment transport formulations applied to dam-break flows over mobile beds. All the formulations analysed are commonly used in morphological studies in rivers, and include the formulas of Meyer-Peter & Müller (1948), Wong-Parker (2003), Einstein-Brown (1950), van Rijn (1984), Engelund-Hansen (1967), Ackers-White (1973), Yang (1973), and a Meyer-Peter & Müller type formula but with ad-hoc coefficients. The relevance of corrections on the sediment flux direction and magnitude due to the bed slope and the non-equilibrium hypothesis is also analysed. All the formulations have been implemented in the numerical model Iber (Bladé et al. (2014)), which solves the depth-averaged shallow water equations coupled to the Exner equation to evaluate the bed evolution. Two different test cases have been

  8. Sedimentary facies and evolution of the upper member of cretaceou Sunjiawan formation in Heishui area of western Liaoning

    Zhao Zhonghua; Xi Haiyin; Chen Debing; Wang Liming; Rao Minghui

    2010-01-01

    The upper member of Sunjiawan formation in Heishui area is mainly alluvial fan facies. From the macroscopic view, alluvial fan facies can be divided into three sub-facies of proximal end gravel braided plain, distal end gravel braided plain and pre-fan flood-plain and further into some micro-facies of debris flow, gravel braided channel, gravel dam, flood-fine and peat bog etc. The upper member of Sunjiawan formation could be divided into three sub-members. The first sub-member is retrograding dry land type fan sediment under drought-humid climate. The second sub-member is retrograding wet land type fan deposit under humid climate. Third sub-member is progradational wetland type fan sediments under humid climate. Sunjiawan formation in Heishui area experienced three evolutionary stages: the early retrograding dryland type fan deposition, the medium term retrograding wet land type fan deposition and the later progradational wetland type fan. (authors)

  9. Clay mineral facies and lateritization in basalts of the southeastern Parana Basin, Brazil

    Oliveira, M.T.G. de; Formoso, M.L.L.; Trescases, J.J.; Meunier, A.

    1998-01-01

    Seventeen samples from two lateritic profiles, each with five facies, were studied. These profiles occur on the old planation surface of the plateau basalts of the southern part of ParanáBasin, Brazil. Optical microscopy, X-ray diffraction, electron microprobe, Mössbauer spectroscopy and Fourier Transform Infrared Spectra were used to obtain information about the nature and chemical composition of each weathering facies. In addition, scanning electron microscopy and analyses of clay minerals were performed to detect microcrystalline environmental changes. Both profiles have two major parts: a loose red-clay latosol separated from an underlying mottled clay and an alterite facies; a stone line may or may not be present between the latosol and the underlying units. In both profiles the latosol consists principally of kaolinite, hematite and goethite. Two alterite facies, shaped by differential weathering, are also present in the lower profile: a halloysite–nontronite clayey matrix with a well developed fissure system occurs in the argillaceous alterite and a network of Al–goethite aggregates is typical of the highly porous cortex of the boulder alterite that is found in the stone line and below it. Gibbsite has crystallized in the large pores of porphyritic boulder alterite but is absent in the small pores of the subaphyric boulder alterite. Clay minerals observed in fissures include halloysite associated with goethite and manganese oxides. The basalt has hydrothermal green-clays (mixed layers and trioctahedral smectites) that formed between primary plagioclase, pyroxene and Ti–magnetite crystals while fresh corestones of the boulder alterite have cryptocrystalline iron-rich material. The study of these profiles shows one principal evolutionary trend for clay minerals. This trend is from smectite and mixed layers that form green clays in altered bedrock at the base of the profile to an intermediate association of nontronite and halloysite in the argillaceous

  10. The potential role of fluids during regional granulite-facies dehydration in the lower crust

    Daniel E. Harlov

    2012-11-01

    Full Text Available High-grade dehydration of amphibolite-facies rocks to granulite-facies is a process that can involve partial melting, fluid-aided solid-state dehydration, or varying degrees of both. On the localized meter scale, solid-state dehydration, due to CO2-rich fluids traveling along some fissure or crack and subsequently outwards along the mineral grain boundaries of the surrounding rock, normally is the means by which the breakdown of biotite and amphibole to orthopyroxene and clinopyroxene occur. Various mineral textures and changes in mineral chemistry seen in these rocks are also seen in more regional orthopyroxene-clinopyroxene-bearing rocks which, along with accompanying amphibolite-facies rocks, form traverses of lower crust. This suggests that solid-state dehydration during high-grade metamorphism could occur on a more regional scale. The more prominent of these fluid-induced textures in the granulite-facies portion of the traverse take the form of micro-veins of K-feldspar along quartz grain boundaries and the formation of monazite inclusions in fluorapatite. The fluids believed responsible take the form of concentrated NaCl- and KCl- brines from a basement ultramafic magma heat source traveling upwards along grain boundaries. Additional experimental work involving CaSO4 dissolution in NaCl-brines, coupled with natural observation of oxide and sulfide mineral associations in granulite-facies rocks, have demonstrated the possibility that NaCl-brines, with a CaSO4 component, could impose the oxygen fugacity on these rocks as opposed to the oxygen fugacity being inherent in their protoliths. These results, taken together, lend credence to the idea that regional chemical modification of the lower crust is an evolutionary process controlled by fluids migrating upwards from the lithospheric mantle along grain boundaries into and through the lower crust where they both modify the rock and are modified by it. Their presence allows for rapid mass and

  11. Using Module Analysis for Multiple Choice Responses: A New Method Applied to Force Concept Inventory Data

    Brewe, Eric; Bruun, Jesper; Bearden, Ian G.

    2016-01-01

    We describe "Module Analysis for Multiple Choice Responses" (MAMCR), a new methodology for carrying out network analysis on responses to multiple choice assessments. This method is used to identify modules of non-normative responses which can then be interpreted as an alternative to factor analysis. MAMCR allows us to identify conceptual…

  12. The Linguistic and the Contextual in Applied Genre Analysis: The Case of the Company Audit Report

    Flowerdew, John; Wan, Alina

    2010-01-01

    By means of an analysis of the genre of the audit report, this study highlights the respective roles of linguistic and contextual analysis in genre analysis, if the results are to be of maximum use in ESP course design. On the one hand, based on a corpus of current and authentic written auditors' reports produced in a large international Hong Kong…

  13. Design and analysis of throttle orifice applying to small space with large pressure drop

    Li Yan; Lu Daogang; Zeng Xiaokang

    2013-01-01

    Throttle orifices are widely used in various pipe systems of nuclear power plants. Improper placement of orifices would aggravate the vibration of the pipe with strong noise, damaging the structure of the pipe and the completeness of the system. In this paper, effects of orifice diameter, thickness, eccentric distance and chamfering on the throttling are analyzed applying CFD software. Based on that, we propose the throttle orifices which apply to small space with large pressure drop are multiple eccentric orifices. The results show that the multiple eccentric orifices can effectively restrain the cavitation and flash distillation, while generating a large pressure drop. (authors)

  14. Stability analysis of multi-infeed HVDC system applying VSC-HVDC

    Liu, Yan; Chen, Zhe

    2010-01-01

    This paper presents a general model of dual infeed HVDC system applying VSC-HVDC, which can be used as an element in large multi infeed HVDC system. The model may have different structure under different grid faults because of the action of breakers. Hence power flow of the system based on this m...

  15. Determinants of long-term growth : New results applying robust estimation and extreme bounds analysis

    Sturm, J.-E.; de Haan, J.

    2005-01-01

    Two important problems exist in cross-country growth studies: outliers and model uncertainty. Employing Sala-i-Martin's (1997a,b) data set, we first use robust estimation and analyze to what extent outliers influence OLS regressions. We then use both OLS and robust estimation techniques in applying

  16. Analysis of domain wall dynamics based on skewness of magnetic Barkhausen noise for applied stress determination

    Ding, Song [College of Electrical Engineering and Control Science, Nanjing Tech University, Nanjing, Jiangsu 211816 (China); School of Automation Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing, Jiangsu 210016 (China); Tian, GuiYun, E-mail: tian280@hotmail.com [School of Automation Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing, Jiangsu 210016 (China); School of Electrical and Electronic Engineering, Merz Court, University of Newcastle upon Tyne, Newcastle NE1 7RU (United Kingdom); Dobmann, Gerd; Wang, Ping [School of Automation Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing, Jiangsu 210016 (China)

    2017-01-01

    Skewness of Magnetic Barkhausen Noise (MBN) signal is used as a new feature for applied stress determination. After experimental studies, skewness presents its ability for measuring applied tensile stress compared with conventional feature, meanwhile, a non-linear behavior of this new feature and an independence of the excitation conditions under compressive stress are found and discussed. Effective damping during domain wall motion influencing the asymmetric shape of the MBN statistical distribution function is discussed under compressive and tensile stress variation. Domain wall (DW) energy and distance between pinning edges of the DW are considered altering the characteristic relaxation time, which is the reason for the non-linear phenomenon of skewness. - Highlights: • The skewness of magnetic Barkhausen noise profile is proposed as a new feature for applied stress determination. • The skewness is sensitive to applied stress and independent to excitation frequency. • Domain wall energy and pinning distance influence the relaxation time of domain wall, which leads to a non-linear behavior of skewness under compressive stress.

  17. An Analysis of Oppositional Culture Theory Applied to One Suburban Midwestern High School

    Blackard, Tricia; Puchner, Laurel; Reeves, Alison

    2014-01-01

    This study explored whether and to what extent Ogbu and Fordham's Oppositional Culture Theory applied to African American high school students at one Midwestern suburban high school. Based on multiple interviews with six African American students, the study found support for some aspects of the theory but not for others.

  18. The Analysis of the Available Technology of Exploiting and Applying Biohydrocarbons for Fuel Production Part I

    Gielo-Klepacz Halina

    2017-08-01

    Full Text Available The article shows the current state of knowledge in the area of applying biohydrocarbons for fuel production, especially in aeronautical applications and to power compression-ignition engines. The technologies based on biochemical and thermal/chemical conversion of biomass are described. Technological potential of these technologies is evaluated. The article is based on the literature review.

  19. The ALFAM2 database on ammonia emission from field-applied manure: Description and illustrative analysis

    Hafner, Sasha D.; Pacholski, Andreas; Bittman, Shabtai

    2018-01-01

    . Data on five manure types (cattle, pig, mink, poultry, mixed, as well as sludge and “other”) applied to three types of crops (grass, small grains, maize, as well as stubble and bare soil) are included. Application methods represented in the database include broadcast, trailing hose, trailing shoe...

  20. English Language Assessment in the Colleges of Applied Sciences in Oman: Thematic Document Analysis

    Al Hajri, Fatma

    2014-01-01

    Proficiency in English language and how it is measured have become central issues in higher education research as the English language is increasingly used as a medium of instruction and a criterion for admission to education. This study evaluated the English language assessment in the foundation Programme at the Colleges of Applied sciences in…