Systematic review of patient history and physical examination to diagnose chronic low back pain originating from the facet joints.

Science.gov (United States)

Maas, E T; Juch, J N S; Ostelo, R W J G; Groeneweg, J G; Kallewaard, J W; Koes, B W; Verhagen, A P; Huygen, F J P M; van Tulder, M W

2017-03-01

Patient history and physical examination are frequently used procedures to diagnose chronic low back pain (CLBP) originating from the facet joints, although the diagnostic accuracy is controversial. The aim of this systematic review is to determine the diagnostic accuracy of patient history and/or physical examination to identify CLBP originating from the facet joints using diagnostic blocks as reference standard. We searched MEDLINE, EMBASE, CINAHL, Web of Science and the Cochrane Collaboration database from inception until June 2016. Two review authors independently selected studies for inclusion, extracted data and assessed the risk of bias. We calculated sensitivity and specificity values, with 95% confidence intervals (95% CI). Twelve studies were included, in which 129 combinations of index tests and reference standards were presented. Most of these index tests have only been evaluated in single studies with a high risk of bias. Four studies evaluated the diagnostic accuracy of the Revel's criteria combination. Because of the clinical heterogeneity, results were not pooled. The published sensitivities ranged from 0.11 (95% CI 0.02-0.29) to 1.00 (95% CI 0.75-1.00), and the specificities ranged from 0.66 (95% CI 0.46-0.82) to 0.91 (95% CI 0.83-0.96). Due to clinical heterogeneity, the evidence for the diagnostic accuracy of patient history and/or physical examination to identify facet joint pain is inconclusive. Patient history and physical examination cannot be used to limit the need of a diagnostic block. The validity of the diagnostic facet joint block should be studied, and high quality studies are required to confirm the results of single studies. Patient history and physical examination cannot be used to limit the need of a diagnostic block. The validity of the diagnostic facet joint block should be studied, and high quality studies are required to confirm the results of single studies. © 2016 European Pain Federation - EFIC®.

Biochemical and biomechanical characterisation of equine cervical facet joint cartilage.

Science.gov (United States)

O'Leary, S A; White, J L; Hu, J C; Athanasiou, K A

2018-04-15

The equine cervical facet joint is a site of significant pathology. Located bilaterally on the dorsal spine, these diarthrodial joints work in conjunction with the intervertebral disc to facilitate appropriate spinal motion. Despite the high prevalence of pathology in this joint, the facet joint is understudied and thus lacking in viable treatment options. The goal of this study was to characterise equine facet joint cartilage and provide a comprehensive database describing the morphological, histological, biochemical and biomechanical properties of this tissue. Descriptive cadaver studies. A total of 132 facet joint surfaces were harvested from the cervical spines of six skeletally mature horses (11 surfaces per animal) for compiling biomechanical and biochemical properties of hyaline cartilage of the equine cervical facet joints. Gross morphometric measurements and histological staining were performed on facet joint cartilage. Creep indentation and uniaxial strain-to-failure testing were used to determine the biomechanical compressive and tensile properties. Biochemical assays included quantification of total collagen, sulfated glycosaminoglycan and DNA content. The facet joint surfaces were ovoid in shape with a flat articular surface. Histological analyses highlighted structures akin to articular cartilage of other synovial joints. In general, biomechanical and biochemical properties did not differ significantly between the inferior and superior joint surfaces as well as among spinal levels. Interestingly, compressive and tensile properties of cervical facet articular cartilage were lower than those of articular cartilage from other previously characterised equine joints. Removal of the superficial zone reduced the tissue's tensile strength, suggesting that this zone is important for the tensile integrity of the tissue. Facet surfaces were sampled at a single, central location and do not capture the potential topographic variation in cartilage properties. This

Unilateral spondylolysis and the presence of facet joint tropism.

Science.gov (United States)

Rankine, James J; Dickson, Robert A

2010-10-01

Retrospective review of the CT scans performed in a group of patients examined for a possible spondylolysis. To investigate whether there is an association between unilateral spondylolysis and facet joint tropism. Spondylolysis is a fatigue fracture of the pars interarticularis of great importance in sports injury. The demonstration of a unilateral spondylolysis is important because there is a potential for full healing if the athletic activity is modified, whereas bilateral spondylolysis frequently leads to established nonunion. Coronally orientated facet joints are known to predispose to spondylolysis by increasing the point loading of the pars interarticularis. The importance of this finding has not been investigated in unilateral spondylolysis. A review of patients with low back pain and a possible diagnosis of spondylolysis who were investigated with multislice CT was performed. The coronal orientation of the facet joints at L4/5 and L5/S1 was measured and comparison was done between those with and without a spondylolysis. The coronal angle of 140 facet joints in 35 patients was recorded. Of 35 patients, 23 had a spondylolysis which was unilateral in 12 patients. The facet joint angle was significantly more coronally orientated in the presence of a spondylolysis when compared with an intact pars (means, 53° and 43°, respectively; P spondylolysis, the facet joint was significantly more coronally orientated on the side of the spondylolysis (means, 52° and 45°, respectively; P spondylolysis. Asymmetric facet joints do increase the force through one side of the spine, with a unilateral spondylolysis occurring on the side of the more coronally orientated facet joint.

Hypertrophic Synovitis of the Facet Joint Causing Root Pain

Directory of Open Access Journals (Sweden)

Koichi Iwatsuki M.D.

2008-01-01

Full Text Available Osteoarthritic changes in the facet joints are common in the presence of degenerative disc disease. Changes in the joint capsule accompany changes in the articular surfaces. Intraspinal synovial cysts that cause radicular pain, cauda equina syndrome, and myelopathy have been reported; however, there have been few reports in orthopedic or neurosurgical literature regarding hypertrophic synovitis of the facet joint presenting as an incidental para-articular mass. Here, we report a case of hypertrophic synovitis causing root pain. We describe the case of a 65-year-old man suffering from right sciatica and right leg pain in the L5 nerve-root dermatome for 1 year; magnetic resonance imaging (MRI revealed an enhanced mass around the L4–5 facet joint. We investigated this mass pathologically. After right medial facetectomy, the symptoms resolved. Pathological investigation revealed this mass was hypertrophic synovitis. Hypertrophic synovitis of the facet joint might cause root pain.

Factors affecting results of fluoroscopy-guided facet joint injection: Probable differences in the outcome of treatment between pure facet joint hypertrophy and concomitant diseases

Directory of Open Access Journals (Sweden)

Akif Albayrak

2016-01-01

Full Text Available Study Design: Retrospective cohort study. Purpose: Facet joints are considered a common source of chronic low-back pain. To determine whether pathogens related to the facet joint arthritis have any effect on treatment failure. Materials and Methods: Facet joint injection was applied to 94 patients treated at our hospital between 2011 and 2012 (mean age 59.5 years; 80 women and 14 men. For the purpose of analysis, the patients were divided into two groups. Patients who only had facet hypertrophy were placed in group A (47 patients, 41 women and 6 men, mean age 55.3 years and patients who had any additional major pathology to facet hypertrophy were placed in group B (47 patients, 39 women and 8 men, mean age 58.9 years. Injections were applied around the facet joint under surgical conditions utilizing fluoroscopy device guidance. A mixture of methylprednisolone and lidocaine was used as the injection ingredient. Results: In terms of Oswestry Disability Index (ODI and visual analog scale (VAS scores, no significant difference was found between preinjection and immediate postinjection values in both groups, and the scores of group A patients were significantly lower (P < 0.005 compared with that of group B patients at the end of the third, sixth, and twelfth month. Conclusion: For low-back pain caused by facet hypertrophy, steroid injection around the facet joint is an effective treatment, but if there is an existing major pathology, it is not as effective.

Correlation of the Features of the Lumbar Multifidus Muscle With Facet Joint Osteoarthritis.

Science.gov (United States)

Yu, Bo; Jiang, Kaibiao; Li, Xinfeng; Zhang, Jidong; Liu, Zude

2017-09-01

Facet joint osteoarthritis is considered a consequence of the aging process; however, there is evidence that it may be associated with degenerative changes of other structures. The goal of this study was to investigate the correlation between lumbar multifidus muscle features and facet joint osteoarthritis. This retrospective study included 160 patients who had acute or chronic low back pain and were diagnosed with facet joint osteoarthritis on computed tomography scan. Morphometric parameters, including cross-sectional area, muscle-fat index, and percentage of bilateral multifidus asymmetry at L3-L4, L4-L5, and L5-S1, were evaluated with T2-weighted magnetic resonance imaging. Patients with facet joint osteoarthritis had a smaller cross-sectional area and a higher muscle-fat index than those without facet joint osteoarthritis (Posteoarthritis at all 3 spinal levels (Posteoarthritis only at L4-L5 (P=.005). Asymmetry of the bilateral multifidus cross-sectional area was independently associated with facet joint osteoarthritis at L5-S1 (P=.009), but did not seem to be responsible for asymmetric degeneration of the bilateral facet joints. A higher multifidus muscle-fat index was independently associated with facet joint osteoarthritis, and bilateral multifidus size asymmetry was associated with the development of facet joint osteoarthritis at L5-S1. It seems more accurate to consider facet joint osteoarthritis a failure of the whole joint structure, including the paraspinal musculature, rather than simply a failure of the facet joint cartilage. [Orthopedics. 2017; 40(5):e793-e800.]. Copyright 2017, SLACK Incorporated.

Subdural empyema following lumbar facet joint injection: An exceeding rare complication.

Science.gov (United States)

Fayeye, Oluwafikayo; Silva, Adikarige Haritha Dulanka; Chavda, Swarupsinh; Furtado, Navin Raoul

2016-01-01

Chronic low back pain is extremely common with a life time prevalence estimated at greater than 70%. Facet joint arthrosis is thought to be the causative aetiological substrate in approximately 25% of chronic low back pain cases. Facet joint injection is a routine intervention in the armamentarium for both the diagnostic and therapeutic management of chronic low back pain. In fact, a study by Carrino et al. reported in excess of 94,000 facet joint injection procedures were carried out in the US in 1999. Although generally considered safe, the procedure is not entirely without risk. Complications including bleeding, infection, exacerbation of pain, dural puncture headache, and pneumothorax have been described. We report a rare case of a 47-year-old female patient who developed a left L4/5 facet septic arthrosis with an associated subdural empyema and meningitis following facet joint injection. This case is unique, as to the best of our knowledge no other case of subdural empyema following facet joint injection has been reported in the literature. Furthermore this case serves to highlight the potential serious adverse sequelae of a routine and apparently innocuous intervention. The need for medical practitioners to be alert to and respond rapidly to the infective complications of facet joint injection cannot be understated. Copyright © 2016 Polish Neurological Society. Published by Elsevier Urban & Partner Sp. z o.o. All rights reserved.

Ultrasound-guided facet block to low back pain: a case report

Directory of Open Access Journals (Sweden)

Ana Ellen Q. Santiago

2014-07-01

Full Text Available BACKGROUND: Osteoarthrosis is a common cause of low back pain. The diagnosis is clinical and can be confirmed by imaging studies. Pain treatment and confirmation of diagnosis are made by intra-articular injection of corticosteroid and by local anesthetic use, due to clinical improvement. A direct monitoring of the procedure can be done under fluoroscopy, a classic technique, or else by an ultrasound-guided procedure. CASE REPORT: Female patient, 88 years old, 1.68 m and 72 kg, with facet osteoarthrosis at L2-L3, L3-L4 and L4-L5 for two years. On physical examination, she exhibited pain on lateralization and spinal extension. We opted in favor of an ultrasound-guided facet joint block. A midline spinal longitudinal scan was obtained, with identification of the desired joint space at L3-L4. A 25 G needle was inserted into the skin by the echographic off-plane ultrasound technique. 1 mL of contrast was administered, with confirmation by fluoroscopy. After aspiration of the contrast, 1 mL of solution containing 0.25% bupivacaine hydrochloride and 10 mg of methylprednisolone acetate was injected. Injections into L3-L4, L2-L3 and L1-L2 to the right were applied. CONCLUSIONS: The visualization of the facet joint by ultrasound involves minimal risk, besides reduction of radiation. This option is suitable for a large part of the population. However, fluoroscopy and computed tomography remain as monitoring techniques indicated for patients with specific characteristics, such as obesity, severe degenerative diseases and anatomical malformations, in which the ultrasound technique is still in need of further study.

Percutaneous Facet Screw Fixation in the Treatment of Symptomatic Recurrent Lumbar Facet Joint Cyst: A New Technique

Energy Technology Data Exchange (ETDEWEB)

Amoretti, Nicolas, E-mail: amorettinicolas@yahoo.fr; Gallo, Giacomo, E-mail: giacomo.gallo83@gmail.com; Bertrand, Anne-Sophie, E-mail: asbertrand3@hotmail.com [Centre Hospitalier Universitaire de Nice (France); Bard, Robert L., E-mail: rbard@cancerscan.com [New York Medical College (United States); Kelekis, Alexis, E-mail: akelekis@med.uoa.gr [University General Hospital “ATTIKON” (Greece)

2016-01-15

We present a case of percutaneous treatment of symptomatic recurrent lumbar facet joint cyst resistant to all medical treatments including facet joint steroid injection. Percutaneous transfacet fixation was then performed at L4–L5 level with a cannulated screw using CT and fluoroscopy guidance. The procedure time was 30 min. Using the visual analog scale (VAS), pain decreased from 9.5, preoperatively, to 0 after the procedure. At 6-month follow-up, an asymptomatic cystic recurrence was observed, which further reduced at the 1-year follow-up. Pain remained stable (VAS at 0) during all follow-ups. CT- and fluoroscopy-guided percutaneous cyst rupture associated with facet screw fixation could be an alternative to surgery in patients suffering from a symptomatic recurrent lumbar facet joint cyst.

Uncovertebral joint injury in cervical facet dislocation: the headphones sign

Energy Technology Data Exchange (ETDEWEB)

Palmieri, Francesco; Cassar-Pullicino, Victor N.; Dell' Atti, Claudia; Lalam, Radhesh K.; Tins, Bernhard J.; Tyrrell, Prudencia N.M.; McCall, Iain W. [Robert Jones and Agnes Hunt Orthopaedic and District Hospital, Department of Radiology, Oswestry, England (United Kingdom)

2006-06-15

The purpose of our study is to demonstrate the uncovertebral mal-alignment as a reliable indirect sign of cervical facet joint dislocation. We examined the uncovertebral axial plane alignment of 12 patients with unilateral and bilateral cervical facet joint dislocation (UCFJD and BCFJD, respectively), comparing its frequency to the reverse hamburger bun sign on CT and MR axial images. Of the seven cases with BCFJD, five clearly demonstrated the diagnostic reverse facet joint hamburger bun sign on CT and MR images, but in two cases this sign was not detectable. In the five cases with UCFJD, four demonstrated the reverse hamburger bun sign on both CT and MRI. In one case the reverse hamburger bun sign was not seen adequately with either image modality, but the facet dislocation was identified on sagittal imaging. The uncovertebral mal-alignment was detected in all 12 cases. Normally, the two components of the uncovertebral joint enjoy a concentric relationship that in the axial plane is reminiscent of the relationship of headphones with the wearer's head. We name this appearance the 'headphones' sign. Radiologists should be aware of the headphones sign as a reliable indicator of facet joint dislocation on axial imaging used in the assessment of cervical spine injuries. (orig.)

Facet joint orientation and tropism in lumbar degenerative disc disease and spondylolisthesis.

Science.gov (United States)

Pichaisak, Witchate; Chotiyarnwong, Chayaporn; Chotiyarnwong, Pojchong

2015-04-01

Although degenerative disc disease (DDD) and degenerative spondylolisthesis (DS) are two common causes of back pain in elderly, the association between the lumbarfacet joint angle and tropism in these conditions are still unclear. To evaluate the difference in facet joint angles between normal population and lumbar degenerative disc disease and spondylolisthesis patient. The angle of lumbar facet joints were retrospectively measured with magnetic resonance imaging (MRI) to determine whether there was a difference between degenerative diseases. MRI of patients with DDD, DS, and control group at facet joint between L3-4, L4-5 and L5-S1 level were measured in axial view (60 subjects in each group). There was no difference infacetjoint angle in DDD (44.1 ± 11.9) and control (45.6 ± 8.9), but differed in DS (40.1 ± 10. 7) and control group (p = 0.010) at L4-5 level. Facet tropism showed difference between degenerative groups and control group at L4-5 level. DS group showed difference in facet joints angle and tropism when compared with control population, while DDD showed difference only in facet tropism. In addition, longitudinal studies are needed to understand the clinical significant between facet joint angle and tropism in spinal degenerative diseases.

Treatment of lumbar facet joint syndrome by CT-guided intraarticular infiltration of fact joints

International Nuclear Information System (INIS)

Schleifer, J.; Fenzl, G.; Wolf, A.; Diehl, K.

1994-01-01

In 62 patients with facet syndrome a total of 205 joints were infiltrated, CT monitoring being used in all cases. Each facet joint was infiltrated with 0.3 ml bupivacaine and 0.8 ml methylprednisolone. The patients were divided into three groups. Group 1 consisted of 24 persons who had undergone lumbar disc surgery, group 2 of 23 patients with spondylarthrosis of the facet joints, and group 3 of 15 patients who had undergone lumbar disc surgery but hat additional spondylarthrosis. Very good results were defined as pain relief for longer than 4 weeks, good results as pain relief for up to 4 weeks and poor results as brief pain relief or none at all. In 27 patients facet infiltration was performed for the purpose of diagnosis. Results were significantly in group 2 than in group 1. In group 3 results were better than in group 1, but worse than in group 2. These differences were not statistical by significant. Seven patients in the diagnostic group had no pain relief, and facet syndrome was excluded. (orig.) [de

Degenerative Changes of the Facet Joints in Adults With Lumbar Spondylolysis.

Science.gov (United States)

Goda, Yuichiro; Sakai, Toshinori; Harada, Taihei; Takao, Shoichiro; Takata, Yoichiro; Higashino, Kosaku; Harada, Masafumi; Sairyo, Koichi

2017-07-01

Radiologic analysis using computed tomography. To analyze the degenerative changes of the facet joints in patients with spondylolysis in comparison with control subjects. Defects of the pars interarticularis are thought to result in a reduction of biomechanical stress on adjacent facet joints. Therefore, degenerative changes of the facet joints in patients with spondylolysis are expected to be less than those in patients without spondylolysis. Abdominal and pelvic multidetector computed tomography scans of 2000 subjects, performed for conditions unrelated to low back pain, were reviewed. A total of 107 patients (37 women and 70 men) with L5 spondylolysis were identified [spondylolysis (+) group]. Sex-matched and age-matched controls without spondylolysis were chosen randomly [spondylolysis (-) group]. Subjects in the spondylolysis group were subdivided into either bilateral spondylolysis or unilateral spondylolysis groups for comparison with the control group. Four radiologic findings (narrowing, sclerosis, osteophyte, and bone cyst) indicative of degenerative change of the facet joints adjacent to the L5 pars defects were evaluated and the degree of degenerative change was graded by summing the number of degenerative changes (score range, 0-4). The χ test and Mann-Whitney U test were used for statistical analysis. Significantly more degenerative changes in both L4/L5 and L5/S facet joints were found in the spondylolysis (+) group than in the spondylolysis (-) group (χ test, P spondylolysis (+) group than in the spondylolysis (-) group. Degenerative changes of the facet joints at both L4/L5 and L5/S were more severe in the unilateral spondylolysis (+) group than in the spondylolysis (-) group. Degenerative changes of the facet joints in patients with lumbar spondylolysis were more severe than those without spondylolysis.

[Feasibility and accuracy of ultrasound-guided methodology in the examination of lumbar spine facet joints].

Science.gov (United States)

Wen, Chuan-Bing; Li, Yong-Zhong; Tang, Qin-Qin; Sun, Lin; Xiao, Hong; Yang, Bang-Xiang; Song, Li; Liu, Hui

2013-03-01

To investigate the feasibility, accuracy of B ultrasound in the examination of joint space of lumbar spine facet joints compared with CT scan. Ten healthy adult volunteers were enrolled. The joint space of lumbar facet joints was measured by ultrasound. To identify the spinal levels, the posterior parasagittal sonograms were obtained at levels L1 to S1. The lumbar facet joints were delineated with the help of transverse sonograms at each level. Meanwhile, the lumbar facet joints were evaluated by spiral CT on the same plane, reformatted to 1-mm axial slices. A total of 88 lumbar facet joints from L1 to S1 were clearly visualized in the 10 volunteers. Both ultrasound and CT measurements showed the same average depth and lateral distance of lumbar facet joint space (P > 0.05). The lumbar facet joint space can be accurately demonstrated by ultrasound.

Isolated Facet Joint Fracture as a Cause of Chronic Low Back Pain and Sciatica

Directory of Open Access Journals (Sweden)

Robert W Teasell

1996-01-01

Full Text Available A case of facet joint fracture following a rear-end motor vehicle accident who presented with chronic low back pain and sciatica is outlined. Diagnosis was made with 99Tc nuclear bone scan and was confirmed on computed tomographic scan after diagnosis with regular radiographs had failed. Facetectomy relieved pain but led to symptoms related to asymmetric load on the opposite facet joint. Symptoms were substantially relieved with a facet joint deinnervation procedure. Facet joint fracture was felt to occur as a consequence of compression forces on the facet joint at the time of impact.

Facet joint injuries in acute cervical spine trauma : evaluation with CT and MRI

Energy Technology Data Exchange (ETDEWEB)

Ha, Jeon Ju; Kim, Dong Hyun; Lee, Jeong Hwa; Lee, Keon; Kwon, Hyeok Po; Kwon, Jung Hyeok; Yun, Seong Mun [Dongkang General Hospital, Seoul (Korea, Republic of)

1999-05-01

To evaluate injury patterns of facet joints and associated soft tissue injuries in patients with acute traumatic cervical facet joint injuries. From among patients with cervical spine trauma, 27 with facet joint injuries, as seen on CT and MRI, were chosen for this study. CT scans were analyzed with regard to the location of facet joint injury, the presence or absence of facet dislocation or fracture, and other associated fractures. MR images were analyzed with regard to ligament injury, intervertebral disc injury, intervertebral disc herniation, and spinal cord injury. The most common location of facet joint injury was C6-7 level(n=10), followed by C5-6(n=8). Among these 27 patients with facet joint injuries, 12(44%) had bilateral injuries and 15(56%) unilateral injuries. Facet fractures were present in 17 cases(63%) and the fracture of inferior facet was more frequent than superior. Patterns of fracture were vertical, transverse, or comminuted, but vertical fracture was the most common. Various degrees of dislocation were observed in patients with facet fractures. Fractures other than facet included pillar(n=11), lamina(n=6), transverse process(n=14), body(n=13), and spinous process(n=3). On MR images, anterior longitudinal ligament injury was found in 8 patients(30%), posterior longitudinal ligament injury in 4(15%), and interspinous ligament injury in 20(74%). Twelve patients(44%) had spinal cord injuries including edema(n=8) and hemorrhage(n=4). Among patients with disc abnormalities, 11(41%) had intervertebral disc injuries, and traumatic disc herniations were found in nine. Traumatic cervical facet joint injuries were manifested as various patterns and frequently associated with other fractures or soft tissue injuries. Analysis of CT and MR findings of these injury patterns helped formulate a therapeutic plan and determine of prognosis.

The efficacy of conventional radiofrequency denervation in patients with chronic low back pain originating from the facet joints: a meta-analysis of randomized controlled trials.

Science.gov (United States)

Lee, Chang-Hyun; Chung, Chun Kee; Kim, Chi Heon

2017-11-01

Radiofrequency denervation is commonly used for the treatment of chronic facet joint pain that has been refractory to more conservative treatments, although the evidence supporting this treatment has been controversial. We aimed to elucidate the precise effects of radiofrequency denervation in patients with low back pain originating from the facet joints relative to those obtained using control treatments, with particular attention to consistency in the denervation protocol. A meta-analysis of randomized controlled trials was carried out. Adult patients undergoing radiofrequency denervation or control treatments (sham or epidural block) for facet joint disease of the lumbar spine comprised the patient sample. Visual analog scale (VAS) pain scores were measured and stratified by response of diagnostic block procedures. We searched PubMed, Embase, Web of Science, and the Cochrane Database for randomized controlled trials regarding radiofrequency denervation and control treatments for back pain. Changes in VAS pain scores of the radiofrequency group were compared with those of the control group as well as the minimal clinically important difference (MCID) for back pain VAS. Meta-regression model was developed to evaluate the effect of radiofrequency treatment according to responses of diagnostic block while controlling for other variables. We then calculated mean differences and 95% confidence intervals (CIs) using random-effects models. We included data from seven trials involving 454 patients who had undergone radiofrequency denervation (231 patients) and control treatments such as sham or epidural block procedures (223 patients). The radiofrequency group exhibited significantly greater improvements in back pain score when compared with the control group for 1-year follow-up. Although the average improvement in VAS scores exceeded the MCID, the lower limit of the 95% CI encompassed the MCID. A subgroup of patients who responded very well to diagnostic block

Comparison of facet joint activity on 99mTc-MDP SPECT/CT with facet joint signal change on MRI with fat suppression.

Science.gov (United States)

Lehman, Vance T; Murphy, Robert C; Schenck, Louis A; Carter, Rickey E; Johnson, Geoffrey B; Kotsenas, Amy L; Morris, Jonathan M; Nathan, Mark A; Wald, John T; Maus, Timothy P

2016-01-01

We compared signal change on magnetic resonance imaging (MRI) with fat suppression and bone scan activity of lumbar facet joints to determine if these two imaging findings are correlated. We retrospectively identified all patients who underwent imaging of the lumbar spine for pain evaluation using both technetium-99m methylene disphosphonate single-photon emission computed tomography/computed tomography (99mTc-MDP SPECT/CT) and MRI with at least one fat-suppressed T2- or T1-weighted sequence with gadolinium enhancement within a 180-day interval, at our institution between 1 January 2008 and 19 February 2013. Facet joint activity on 99mTc-MDP SPECT/CT and peri-facet signal change on MRI were rated as normal or increased. Agreement between the two examination types were determined with the κ and prevalence-adjusted bias-adjusted κ (PABAK) statistics. This study included 60 patients (28 male, 47%), with a mean age of 49±19.7 years (range, 12-93 years). The κ value indicated no agreement between 99mTc-MDP SPECT/CT and MRI (κ=-0.026; 95% confidence interval: -0.051, 0.000). The PABAK values were fair to high at each spinal level, which suggests that relatively low disease prevalence lowered the κ values. Together, the κ and PABAK values indicate that there is some degree of intermodality agreement, but that it is not consistent. Overall, facet joint signal change on fat-suppressed MRI did not always correlate with increased 99mTc-MDP SPECT/CT activity. MRI and 99mTc-MDP SPECT/CT for facet joint evaluation should not be considered interchangeable examinations in clinical practice or research.

Isolation and Characterization of Human Mesenchymal Stem Cells From Facet Joints and Interspinous Ligaments.

Science.gov (United States)

Kristjánsson, Baldur; Limthongkul, Worawat; Yingsakmongkol, Wicharn; Thantiworasit, Pattarawat; Jirathanathornnukul, Napaphat; Honsawek, Sittisak

2016-01-01

A descriptive in vitro study on isolation and differentiation of human mesenchymal stem cells (MSCs) derived from the facet joints and interspinous ligaments. To isolate cells from the facet joints and interspinous ligaments and investigate their surface marker profile and differentiation potentials. Lumbar spinal canal stenosis and ossification of the posterior longitudinal ligament are progressive conditions characterized by the hypertrophy and ossification of ligaments and joints within the spinal canal. MSCs are believed to play a role in the advancement of these diseases and the existence of MSCs has been demonstrated within the ligamentum flavum and posterior longitudinal ligament. The aim of this study was to investigate whether these cells could also be found within facet joints and interspinous ligaments. Samples were harvested from 10 patients undergoing spinal surgery. The MSCs from facet joints and interspinous ligaments were isolated using direct tissue explant technique. Cell surface antigen profilings were performed via flow cytometry. Their lineage differentiation potentials were analyzed. The facet joints and interspinous ligaments-derived MSCs have the tri-lineage potential to be differentiated into osteogenic, adipogenic, and chondrogenic cells under appropriate inductions. Flow cytometry analysis revealed both cell lines expressed MSCs markers. Both facet joints and interspinous ligaments-derived MSCs expressed marker genes for osteoblasts, adipocytes, and chondrocytes. The facet joints and interspinous ligaments may provide alternative sources of MSCs for tissue engineering applications. The facet joints and interspinous ligaments-derived MSCs are part of the microenvironment of the human ligaments of the spinal column and might play a crucial role in the development and progression of degenerative spine conditions.

Chronic whiplash-associated disorder and traumatic cerebrospinal fluid leak. Analysis of cases with radioisotope cisternography, epidural blood patch, and cervical facet joint blocks

International Nuclear Information System (INIS)

Ishikawa, Shinichi; Kobayashi, Hiroyuki; Takahara, Hiroshi; Kojo, Shigeru; Hashimoto, Hidenori; Moriyama, Eiji; Nishida, Ayumi

2008-01-01

This paper describes RI cisternographic (RIC) examinations of whiplash-associated disorder (WAD) and results of their treatment with nerve block and epidural blood patch (EBP) conducted in authors' facilities. Subjects were 40 chronic (av. symptomatic period of 3.1 y) WAD patients (av. age 34 y) with traffic (28 cases), sports (7) and falling (5) causes with complication of suspicious cerebrospinal fluid (CSF) leak. RIC was done 2.5-24 hr after injection of 37 MBq of 111 In-diethylenetriamine pentaacetic acid (DTPA) in the medullary space through epidural puncturing needle. Positive finding of clear leak or early accumulation of RI in the bladder was seen in 21 cases and negative, in 19. Positive patients had significantly higher rates of headache, abnormal vision and fatigue than negative ones. EBP was conducted through X-ray to all positive patients and to negative ones with strongly suspicious leak complication (7 cases), which resulted in improvement of symptoms like headache and vision in the former, but no improvement in the latter cases. Repeated RIC of the patients with poor improvement in the former was suggested effective for judgment of repetition of EBP treatment. Cervical facet joint blocks were found effective in cases with posterior cervical pain. Symptoms in WAD accompanying headache should be differentially diagnosed whether it is derived from posttraumatic CSF leak or from pain due to cervical facet arthritis. (R.T.)

The prevalence of lumbar facet joint edema in patients with low back pain

International Nuclear Information System (INIS)

Friedrich, Klaus M.; Pinker, Katja; Trattnig, Siegfried; Nemec, Stefan; Peloschek, Philipp; Weber, Michael

2007-01-01

The objective was to assess the prevalence of lumbar facet joint edema in patients with low back pain. Lumbar spine MR examinations (1.5 T) of 145 consecutive patients (87 women, 58 men; mean age 52.8, range 17-94 years) were retrospectively evaluated with regard to the presence of facet joint edema. The MR protocol included sagittal short-tau inversion recovery (STIR), T1- and T2-weighted as well as transverse T2-weighted images. In 9 patients follow-up MR examinations were performed and results were compared with pain. The agreement between the change in intensity of facet joint edema and the change in intensity of pain was assessed using kappa statistics and Kendall's tau coefficient. In 21 of the 145 patients (14%) edema was found at the facet joints: in 52.4% at L4/5, in 19.0% at L5/S1, in 14.3% at L4/5 and L5/S1, in 9.5% at L3/4 and L4/5, and in 4.8% at L3/4. The agreement between the change in pain score and intensity of edema within the follow-up group was ''almost perfect'' (kappa = 0.81). Kendall's tau coefficient was 0.91, indicating high agreement. Sagittal STIR images detect facet joint edema in 14% of patients with low back pain. This fact may be useful for planning treatment including facet joint injections. (orig.)

MR imaging and CT in osteoarthritis of the lumbar facet joints

International Nuclear Information System (INIS)

Weishaupt, D.; Zanetti, M.; Hodler, J.; Boos, N.

1999-01-01

Objective. To test the agreement between MR imaging and CT in the assessment of osteoarthritis of the lumbar facet joints, and thus to provide data about the need for an additional CT scan in the presence of an MR examination. Design and patients. Using a four-point scale, two musculoskeletal radiologists independently graded the severity of osteoarthritis of 308 lumbar facet joints on axial T2-weighted and on sagittal T1- and T2-weighted turbo-spin-echo images and separately on the corresponding axial CT scans. Kappa statistics and percentage agreement were calculated. Results. The weighted kappa coefficients for MR imaging versus CT were 0.61 and 0.49 for readers 1 and 2, respectively. The weighted kappa coefficients for interobserver agreement were 0.41 for MR imaging and 0.60 for CT, respectively. There was agreement within one grade between MR and CT images in 95% of cases for reader 1, and in 97% of cases for reader 2. Conclusion. With regard to osteoarthritis of the lumbar facet joints there is moderate to good agreement between MR imaging and CT. When differences of one grade are disregarded agreement is even excellent. Therefore, in the presence of an MR examination CT is not required for the assessment of facet joint degeneration. (orig.)

Quantitative in vivo MRI evaluation of lumbar facet joints and intervertebral discs using axial T2 mapping.

Science.gov (United States)

Stelzeneder, David; Messner, Alina; Vlychou, Marianna; Welsch, Goetz H; Scheurecker, Georg; Goed, Sabine; Pieber, Karin; Pflueger, Verena; Friedrich, Klaus M; Trattnig, Siegfried

2011-11-01

To assess the feasibility of T2 mapping of lumbar facet joints and intervertebral discs in a single imaging slab and to compare the findings with morphological grading. Sixty lumbar spine segments from 10 low back pain patients and 5 healthy volunteers were examined by axial T2 mapping and morphological MRI at 3.0 Tesla. Regions of interest were drawn on a single slice for the facet joints and the intervertebral discs (nucleus pulposus, anterior and posterior annulus fibrosus). The Weishaupt grading was used for facet joints and the Pfirrmann score was used for morphological disc grading ("normal" vs. "abnormal" discs). The inter-rater agreement was excellent for the facet joint T2 evaluation (r = 0.85), but poor for the morphological Weishaupt grading (kappa = 0.15). The preliminary results show similar facet joint T2 values in segments with normal and abnormal Pfirrmann scores. There was no difference in mean T2 values between facet joints in different Weishaupt grading groups. Facet joint T2 values showed a weak correlation with T2 values of the posterior annulus (r = 0.32) This study demonstrates the feasibility of a combined T2 mapping approach for the facet joints and intervertebral discs using a single axial slab.

Quantitative in vivo MRI evaluation of lumbar facet joints and intervertebral discs using axial T2 mapping

International Nuclear Information System (INIS)

Stelzeneder, David; Messner, Alina; Scheurecker, Georg; Goed, Sabine; Friedrich, Klaus M.; Trattnig, Siegfried; Vlychou, Marianna; Welsch, Goetz H.; Pieber, Karin; Pflueger, Verena

2011-01-01

To assess the feasibility of T2 mapping of lumbar facet joints and intervertebral discs in a single imaging slab and to compare the findings with morphological grading. Sixty lumbar spine segments from 10 low back pain patients and 5 healthy volunteers were examined by axial T2 mapping and morphological MRI at 3.0 Tesla. Regions of interest were drawn on a single slice for the facet joints and the intervertebral discs (nucleus pulposus, anterior and posterior annulus fibrosus). The Weishaupt grading was used for facet joints and the Pfirrmann score was used for morphological disc grading (''normal'' vs. ''abnormal'' discs). The inter-rater agreement was excellent for the facet joint T2 evaluation (r = 0.85), but poor for the morphological Weishaupt grading (kappa = 0.15). The preliminary results show similar facet joint T2 values in segments with normal and abnormal Pfirrmann scores. There was no difference in mean T2 values between facet joints in different Weishaupt grading groups. Facet joint T2 values showed a weak correlation with T2 values of the posterior annulus (r = 0.32) This study demonstrates the feasibility of a combined T2 mapping approach for the facet joints and intervertebral discs using a single axial slab. (orig.)

In vivo facet joint loading of the canine lumbar spine.

Science.gov (United States)

Buttermann, G R; Schendel, M J; Kahmann, R D; Lewis, J L; Bradford, D S

1992-01-01

This study describes a technique to measure in vivo loads and the resultant load-contact locations in the facet joint of the canine lumbar spine. The technique is a modification of a previously described in vitro method that used calibrated surface strains of the lateral aspect of the right L3 cranial articular process. In the present study, strains were measured during various in vivo static and dynamic activities 3 days after strain gage implantation. The in vivo recording technique and its errors, which depend on the location of the applied facet loads, is described. The results of applying the technique to five dogs gave the following results. Relative resultant contact load locations on the facet tended to be in the central and caudal portion of the facet in extension activities, central and cranial in standing, and cranial and ventral in flexion or right-turning activities. Right-turning contact locations were ventral and cranial to left-turning locations. Resultant load locations at peak loading during walking were in the central region of the facet, whereas resultant load locations at minimum loading during walking were relatively craniad. This resultant load-contact location during a walk gait cycle typically migrated in an arc with a displacement of 4 mm from minimum to maximum loading. Static tests resulted in a range of facet loads of 0 N in flexion and lying to 185 N for two-legged standing erect, and stand resulted in facet loads of 26 +/- 15 N (mean +/- standard deviation [SD]). Dynamic tests resulted in peak facet loads ranging from 55 N while walking erect to 170 N for climbing up stairs. Maximum walk facet loads were 107 +/- 27 N. The technique is applicable to in vivo studies of a canine facet joint osteoarthritis model and may be useful for establishing an understanding of the biomechanics of low-back pain.

Congenital absence of the lumbar facet joint associated with bilateral spondylolysis of the fifth lumbar vertebra.

Science.gov (United States)

Wang, Zhuo; Sakakibara, Toshihiko; Kasai, Yuichi

2013-01-01

A 14-year-old boy presented with a rare case of congenital absence of lumbar facet joint manifesting as low back pain. Physical examination showed no neurological or hematologic abnormalities. Radiography revealed absence of a facet joint on the right side of L4-5. Computed tomography and three-dimensional computed tomography revealed absence of the facet joint on the right side of L4-5 and spondylolysis on both sides of L5. Pain subsided after conservative treatment. This is an extremely rare case of congenital absence of lumbar facet joint associated with bilateral spondylolysis.

Intraarticular Pulsed Radiofrequency to Treat Refractory Lumbar Facet Joint Pain in Patients with Low Back Pain.

Science.gov (United States)

Chang, Min Cheol; Cho, Yun-Woo; Ahn, Da Hyun; Do, Kyung Hee

2018-04-01

Many treatment techniques have been used for refractory lumbar facet joint pain; however, their efficacy has been controversial. In this study, we investigated the clinical efficacy and safety of intra-articular pulsed radiofrequency for the treatment of refractory lumbar facet joint pain in patients with low back pain. Twenty patients with refractory lumbar facet joint pain were recruited, and each patient was treated via intra-articular pulsed radiofrequency. The treatment effects were measured with a numerical rating scale, and the technical accuracy of intra-articular pulsed radiofrequency treatment was evaluated independently by 2 radiologists. Any adverse events or complications also were checked. We performed intra-articular pulsed radiofrequency treatment at 48 levels of the lumbar facet joints in 20 patients (5 men and 15 women; mean age, 64.50 ± 10.65 years) with refractory lumbar facet joint pain. Pain scores were significantly reduced at 1 month, 3 months, and 6 months after treatment (P radiofrequency results in all 20 patients, without any serious adverse effects. Treatment using intra-articular pulsed radiofrequency is an alternative to other techniques in patients with refractory lumbar facet joint pain. Copyright © 2018 Elsevier Inc. All rights reserved.

Inter-rater reliability of diagnostic criteria for sacroiliac joint-, disc- and facet joint pain.

Science.gov (United States)

van Tilburg, Cornelis W J; Groeneweg, Johannes G; Stronks, Dirk L; Huygen, Frank J P M

2017-01-01

Several diagnostic criteria sets are described in the literature to identify low back pain subtypes, but very little is known about the inter-rater reliability of these criteria. We conducted a study to determine the reliability of diagnostic tests that point towards SI joint-, disc- or facet joint pain. Inter-rater reliability study alongside three randomized clinical trials. Multidisciplinary pain center of general hospital. Patients aged 18 or more with medical history and physical examination suggestive of sacroiliac joint-, disc- and facet joint pain on lumbar level. Making use of nowadays most common used diagnostic criteria, a physical examination is taken independently by three physicians (two pain physicians and one orthopedic surgeon). Inter-rater reliability (Kappa (κ) measure of agreement) and significance (p) between raters are presented. Strengths of agreement, indicated with κ values above 0,20, are presented in order of agreement. One hundred patients were included. None of the parameters from the physical investigation had κ values of more than 0.21 (fair) in all pairs of raters. Between two raters (C and D), there was an almost perfect agreement on three parameters, more specifically ``Abnormal sensory and motor examination, hyperactive or diminished reflexes'', ``Sitting exam shows no reflex, motor or sensory signs in the legs'' and ``Straight leg raising (Laségue) negative between 30 and 70 degrees of flexion''. The ``Drop test positive'' parameters had moderate strength of agreement between raters A and D and fair strength between raters A and B. The ``Digital interspinous pressure test positive'' had moderate strength of agreement between raters C and D and fair strength of agreement between raters A and B as well as raters B and C. Three other parameters had a fair strength of agreement between two raters, all other parameters had a slight or poor strength of agreement. Inter-rater reliability, confidence intervals and significance of

Contribution of facet joints, axial compression, and composition to human lumbar disc torsion mechanics.

Science.gov (United States)

Bezci, Semih E; Eleswarapu, Ananth; Klineberg, Eric O; O'Connell, Grace D

2018-02-12

Stresses applied to the spinal column are distributed between the intervertebral disc and facet joints. Structural and compositional changes alter stress distributions within the disc and between the disc and facet joints. These changes influence the mechanical properties of the disc joint, including its stiffness, range of motion, and energy absorption under quasi-static and dynamic loads. There have been few studies evaluating the role of facet joints in torsion. Furthermore, the relationship between biochemical composition and torsion mechanics is not well understood. Therefore, the first objective of this study was to investigate the role of facet joints in torsion mechanics of healthy and degenerated human lumbar discs under a wide range of compressive preloads. To achieve this, each disc was tested under four different compressive preloads (300-1200 N) with and without facet joints. The second objective was to develop a quantitative structure-function relationship between tissue composition and torsion mechanics. Facet joints have a significant contribution to disc torsional stiffness (∼60%) and viscoelasticity, regardless of the magnitude of axial compression. The findings from this study demonstrate that annulus fibrosus GAG content plays an important role in disc torsion mechanics. A decrease in GAG content with degeneration reduced torsion mechanics by more than an order of magnitude, while collagen content did not significantly influence disc torsion mechanics. The biochemical-mechanical and compression-torsion relationships reported in this study allow for better comparison between studies that use discs of varying levels of degeneration or testing protocols and provide important design criteria for biological repair strategies. © 2018 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res. © 2018 Orthopaedic Research Society. Published by Wiley Periodicals, Inc.

Lateral atlanto-axial joint block for cervical headache

Directory of Open Access Journals (Sweden)

Shantanu P Mallick

2013-01-01

Full Text Available The patient is a 32-year-old car mechanic, having chronic headache for three years affecting the left upper lateral part of the neck, suboccipital region, and scalp (VAS: 8/10, having a history of whiplash injury from a car accident three years ago, with a deep cut injury on the scalp. He was complaining of neck stiffness and pain during all neck movements and a burning pain in the entire left side of the neck and scalp. He was treated, using conservative methods, by Orthopedists, Neurologists, as well as Psychiatrists, and all investigations including computed tomography (CT of the brain, X-ray cervical spine, and all related blood reports were within normal limits. He was sent to the Pain Clinic for further assessment. Suspecting sympathetic mediated pain on the left side and upper cervical facet pain, he was given a diagnostic Stellate Ganglion Block, a Third Occipital Nerve block, and a fourth cervical medial branch block (MBB, which gave him good relief; by this the visual analog scale (VAS score reduced to 3/10. Yet, he was complaining of pain on a focal area on the left upper cervical spine corresponding to the C1-2 joint with lateral rotation on the left side. Subsequently it was decided that a diagnostic Atlanto-axial joint block under fluoroscopy would be carried out. This gave him very good relief from the cervicogenic headache.

Detailed examination of the lower cervical spine facet joints in a road traffic crash fatality - a case study

DEFF Research Database (Denmark)

Uhrenholt, Lars; Nielsen, Edith; Vesterby, Annie

2005-01-01

The lower cervical spine facet joints of a road traffic crash fatality were examined using diagnostic imaging and histological techniques. No injuries to the cervical spine facet joints could be identified with diagnostic imaging including conventional radiology, CT and MRI. Examination of stained...... histological sections visualised the morphology and integrity of the facet joints in detail. Occult injuries to and in close proximity of the cervical spine facet joints were identified only on histological examination....

Delayed onset of a spinal epidural hematoma after facet joint injection

Directory of Open Access Journals (Sweden)

Mirko Velickovic

2016-10-01

Full Text Available The treatment of chronic back pain is a challenging problem. Facet joint infiltration is an established treatment for chronic low back pain caused by arthrosis of the lumbar facet joints. Due to the increasing number of patients with chronic low back pain, this therapy has become more frequent. We treated a 51-year-old male patient, who developed an epidural hematoma 2 months after infiltration therapy. Our case shows that even a delayed onset of spinal epidural hematoma is possible and should be kept in mind as a possible cause of acute myelopathy after spinal intervention.

Qualitative and quantitative assessment of degeneration of cervical intervertebral discs and facet joints.

Science.gov (United States)

Walraevens, Joris; Liu, Baoge; Meersschaert, Joke; Demaerel, Philippe; Delye, Hans; Depreitere, Bart; Vander Sloten, Jos; Goffin, Jan

2009-03-01

Degeneration of intervertebral discs and facet joints is one of the most frequently encountered spinal disorders. In order to describe and quantify degeneration and evaluate a possible relationship between degeneration and biomechanical parameters, e.g., the intervertebral range of motion and intradiscal pressure, a scoring system for degeneration is mandatory. However, few scoring systems for the assessment of degeneration of the cervical spine exist. Therefore, two separate objective scoring systems to qualitatively and quantitatively assess the degree of cervical intervertebral disc and facet joint degeneration were developed and validated. The scoring system for cervical disc degeneration consists of three variables which are individually scored on neutral lateral radiographs: "height loss" (0-4 points), "anterior osteophytes" (0-3 points) and "endplate sclerosis" (0-2 points). The scoring system for facet joint degeneration consists of four variables which are individually scored on neutral computed tomography scans: "hypertrophy" (0-2 points), "osteophytes" (0-1 point), "irregularity" on the articular surface (0-1 point) and "joint space narrowing" (0-1 point). Each variable contributes with varying importance to the overall degeneration score (max 9 points for the scoring system of cervical disc degeneration and max 5 points for facet joint degeneration). Degeneration of 20 discs and facet joints of 20 patients was blindly assessed by four raters: two neurosurgeons (one senior and one junior) and two radiologists (one senior and one junior), firstly based on first subjective impression and secondly using the scoring systems. Measurement errors and inter- and intra-rater agreement were determined. The measurement error of the scoring system for cervical disc degeneration was 11.1 versus 17.9% of the subjective impression results. This scoring system showed excellent intra-rater agreement (ICC = 0.86, 0.75-0.93) and excellent inter-rater agreement (ICC = 0

Pedicle marrow signal intensity changes in the lumbar spine: a manifestation of facet degenerative joint disease

International Nuclear Information System (INIS)

Morrison, J.L.; Kaplan, P.A.; Dussault, R.G.; Anderson, M.W.

2000-01-01

Objective. Signal intensity changes in lumbar pedicles, similar to those described in vertebral body endplates adjacent to degenerated discs, have been described as an ancillary sign of spondylolysis on MRI. The purpose of this study was to determine whether pedicle marrow signal intensity changes also occur in association with facet degenerative joint disease.Design. Eighty-nine lumbar spine MRI examinations without spondylolysis were reviewed for marrow signal intensity changes in pedicles and vertebral bodies as well as for facet degenerative joint disease.Results. Five percent (46/890) of lumbar pedicles in 23 patients had marrow signal intensity changes. Ninety-one percent (42/46) of the abnormal pedicles had adjacent degenerative joint disease of the facets, while only 21% (189/890) of normal pedicles had adjacent facet degenerative joint disease (p<0.001). Eighty-nine percent (41/46) of the pedicles with marrow signal intensity changes had adjacent degenerative disc disease.Conclusions. Pedicle marrow signal intensity changes are not a specific sign of spondylolysis; they are commonly seen with adjacent facet degenerative joint disease in the absence of spondylolysis. Pedicle marrow signal intensity changes are probably a response to abnormal stresses related to abnormal motion or loading caused by the degenerative changes in the spinal segment. (orig.)

Pedicle marrow signal intensity changes in the lumbar spine: a manifestation of facet degenerative joint disease

Energy Technology Data Exchange (ETDEWEB)

Morrison, J.L.; Kaplan, P.A.; Dussault, R.G.; Anderson, M.W. [Dept. of Radiology, Univ. of Virginia Health System, Charlottesville, VA (United States)

2000-12-01

Objective. Signal intensity changes in lumbar pedicles, similar to those described in vertebral body endplates adjacent to degenerated discs, have been described as an ancillary sign of spondylolysis on MRI. The purpose of this study was to determine whether pedicle marrow signal intensity changes also occur in association with facet degenerative joint disease.Design. Eighty-nine lumbar spine MRI examinations without spondylolysis were reviewed for marrow signal intensity changes in pedicles and vertebral bodies as well as for facet degenerative joint disease.Results. Five percent (46/890) of lumbar pedicles in 23 patients had marrow signal intensity changes. Ninety-one percent (42/46) of the abnormal pedicles had adjacent degenerative joint disease of the facets, while only 21% (189/890) of normal pedicles had adjacent facet degenerative joint disease (p<0.001). Eighty-nine percent (41/46) of the pedicles with marrow signal intensity changes had adjacent degenerative disc disease.Conclusions. Pedicle marrow signal intensity changes are not a specific sign of spondylolysis; they are commonly seen with adjacent facet degenerative joint disease in the absence of spondylolysis. Pedicle marrow signal intensity changes are probably a response to abnormal stresses related to abnormal motion or loading caused by the degenerative changes in the spinal segment. (orig.)

Diagnostic value of lumbar facet joint injection: a prospective triple cross-over study.

Directory of Open Access Journals (Sweden)

Uwe Schütz

Full Text Available The diagnosis "lumbar facet syndrome" is common and often indicates severe lumbar spine surgery procedures. It is doubtful whether a painful facet joint (FJ can be identified by a single FJ block. The aim of this study was to clarify the validity of a single and placebo controlled bilateral FJ blocks using local anesthetics. A prospective single blinded triple cross-over study was performed. 60 patients (31 f, 29 m, mean age 53.2 yrs (22-73 with chronic low back pain (mean pain persistance 31 months, 6 months of conservative treatment without success admitted to a local orthopaedic department for surgical or conservative therapy of chronic LBP, were included in the study. Effect on pain reduction (10 point rating scale was measured. The 60 subjects were divided into six groups with three defined sequences of fluoroscopically guided bilateral monosegmental lumbar FJ test injections in "oblique needle" technique: verum-(local anaesthetic-, placebo-(sodium chloride- and sham-injection. Carry-over and periodic effects were evaluated and a descriptive and statistical analysis regarding the effectiveness, difference and equality of the FJ injections and the different responses was performed. The results show a high rate of non-response, which documents the lack of reliable and valid predictors for a positive response towards FJ blocks. There was a high rate of placebo reactions noted, including subjects who previously or later reacted positively to verum injections. Equivalence was shown among verum vs. placebo and partly vs. sham also. With regard to test validity criteria, a single intraarticular FJ block with local anesthetics is not useful to detect the pain-responsible FJ and therefore is no valid and reliable diagostic tool to specify indication of lumbar spine surgery. Comparative FJ blocks with local anesthetics and placebo-controls have to be interpretated carefully also, because they solely give no proper diagnosis on FJ being main pain

Optimized cervical spine bone SPET for detection of facet joint injury after whiplash injury

Energy Technology Data Exchange (ETDEWEB)

Cardaci, G T; Bower, G D; Taylor, J [Perth and Perth Pain Management, South Perth, WA (Australia). Mount Medical Centre, Isotope Imaging

1999-04-01

Full text: The most frequent origin for chronic cervical pain in patients with a remote history of whiplash injury is the cervical facet joints. Exact localization of facet joint injury is difficult and currently advocated methods include multiple invasive diagnostic injections. Optimization of {sup 99}Tc{sup m}-HDP cervical SPET (CSPET) to accurately localize facet joint pathology was attempted and the results correlated with clinical localization relying on focal joint tenderness and passive movement methods. Imaging was performed on a dual-headed gamma camera system using an elliptical orbit over 360 deg. The patient's neck was flexed to eliminate the cervical lordosis. Reconstructed CSPET images were reorientated into the long axis of the vertebral bodies. CSPET studies were independently scored by two observers blinded to the clinical and other imaging information and correlated with clinical localization and response to radiofrequency ablation. 54 patients have been studied using this technique in a prospective study. Early patient follow-up data will be presented. CSPET was felt to be clinically useful by pain therapists in targeting treatment.

Optimized cervical spine bone SPET for detection of facet joint injury after whiplash injury

International Nuclear Information System (INIS)

Cardaci, G.T.; Bower, G.D.; Taylor, J.

1999-01-01

Full text: The most frequent origin for chronic cervical pain in patients with a remote history of whiplash injury is the cervical facet joints. Exact localization of facet joint injury is difficult and currently advocated methods include multiple invasive diagnostic injections. Optimization of 99 Tc m -HDP cervical SPET (CSPET) to accurately localize facet joint pathology was attempted and the results correlated with clinical localization relying on focal joint tenderness and passive movement methods. Imaging was performed on a dual-headed gamma camera system using an elliptical orbit over 360 deg. The patient's neck was flexed to eliminate the cervical lordosis. Reconstructed CSPET images were reorientated into the long axis of the vertebral bodies. CSPET studies were independently scored by two observers blinded to the clinical and other imaging information and correlated with clinical localization and response to radiofrequency ablation. 54 patients have been studied using this technique in a prospective study. Early patient follow-up data will be presented. CSPET was felt to be clinically useful by pain therapists in targeting treatment

Talocalcaneal Joint Middle Facet Coalition Resection With Interposition of a Juvenile Hyaline Cartilage Graft.

Science.gov (United States)

Tower, Dyane E; Wood, Ryan W; Vaardahl, Michael D

2015-01-01

Talocalcaneal joint middle facet coalition is the most common tarsal coalition, occurring in ≤2% of the population. Fewer than 50% of involved feet obtain lasting relief of symptoms after nonoperative treatment, and surgical intervention is commonly used to relieve symptoms, increase the range of motion, improve function, reconstruct concomitant pes planovalgus, and prevent future arthrosis from occurring at the surrounding joints. Several approaches to surgical intervention are available for patients with middle facet coalitions, ranging from resection to hindfoot arthrodesis. We present a series of 4 cases, in 3 adolescent patients, of talocalcaneal joint middle facet coalition resection with interposition of a particulate juvenile hyaline cartilaginous allograft (DeNovo(®) NT Natural Tissue Graft, Zimmer, Inc., Warsaw, IN). With a mean follow-up period of 42.8 ± 2.9 (range 41 to 47) months, the 3 adolescent patients in the present series were doing well with improved subtalar joint motion and decreased pain, and 1 foot showed no bony regrowth on a follow-up computed tomography scan. The use of a particulate juvenile hyaline cartilaginous allograft as interposition material after talocalcaneal middle facet coalition resection combined with adjunct procedures to address concomitant pes planovalgus resulted in good short-term outcomes in 4 feet in 3 adolescent patients. Copyright © 2015 American College of Foot and Ankle Surgeons. Published by Elsevier Inc. All rights reserved.

Evaluation of Water Content in Lumbar Intervertebral Discs and Facet Joints Before and After Physiological Loading Using T2 Mapping MRI.

Science.gov (United States)

Yamabe, Daisuke; Murakami, Hideki; Chokan, Kou; Endo, Hirooki; Oikawa, Ryosuke; Sawamura, Shoitsu; Doita, Minoru

2017-12-15

T2 mapping was used to quantify the water content of lumbar spine intervertebral discs (IVDs) and facet joints before and after physiological loading. The aim of this study was to clarify the interaction between lumbar spine IVD and facet joints as load-bearing structures by measuring the water content of their matrix after physiological loading using T2 mapping magnetic resonance imaging (MRI). To date, few reports have functionally evaluated lumbar spine IVD and facet joints, and their interaction in vivo. T2 mapping may help detect changes in the water content of IVD and articular cartilage of facet joints before and after physiological loading, thereby enabling the evaluation of changes in interacted water retention between IVD and facet joints. Twenty asymptomatic volunteers (10 female and 10 male volunteers; mean age, 19.3 years; age range, 19-20 years) underwent MRI before and after physiological loading such as lumbar flexion, extension, and rotation. Each IVD from L1/2 to L5/S1 was sliced at center of the disc space, and the T2 value was measured at the nucleus pulposus (NP), anterior annulus fibrosus (AF), posterior AF, and bilateral facet joints. In the NP, T2 values significantly decreased after exercise at every lumbar spinal level. In the anterior AF, there were no significant differences in T2 values at any level. In the posterior AF, T2 values significantly increased only at L4/5. In the bilateral facet joints, T2 values significantly decreased after exercise at every level. There was a significant decrease in the water content of facet joints and the NP at every lumbar spinal level after dynamic loading by physical lumbar exercise. These changes appear to play an important and interactional role in the maintenance of the interstitial matrix in the IVD NP and cartilage in the facet joint. 3.

Lumbar facet joint fat pads: Their normal anatomy and their appearance when enlarged

International Nuclear Information System (INIS)

Taylor, J.R.; McCormick, C.C.

1991-01-01

The polar recesses, superior and inferior to lumbar facet joints, are filled by fat pads from which fat-filled synovial folds project between the articular surfaces for a distance of two to four millimetres. The intracapsular superior recess lies between the ligamentum flavum and the lamina above. The extracapsular inferior recess lies on the back of the lamina below and communicates with the joint through a hole in the inferior capsule. The intracapsular folds move freely in and out of the joint during movements. These features are demonstrated in anatomic studies using transverse sections and radiologic studies using computed tomography. In about 4% of lumbar spines examined, the intraarticular fat pads are enlarged and extend from the joint recess(es) into the middle third of one or more facet joints. The fat pads can be identified in CT scans by their radiolucency and distinguished from vacuum phenomenon by measuring their attenuation values. The cause of the intra-articular enlargement of the fat pads is unknown, but it is suggested that their extension into the middle third of the joint may be secondary to degenerative change in the motion segment with capsular laxity in the affected joint. (orig.)

Histological Osteoarthritic Changes in the Human Cervical Spine Facet Joints Related to Age and Gender

DEFF Research Database (Denmark)

Uhrenholt, Lars; Charles, Annie Vesterby; Gregersen, Markil

2018-01-01

STUDY DESIGN: Cross-sectional autopsy study. OBJECTIVE: Quantify histological changes in the lower cervical spine facet joints with regard to age and gender using systematic random sampling of entire joints. SUMMARY OF BACKGROUND DATA: Neck pain is a common debilitating musculoskeletal condition...... and one of the highest ranked causes of years lived with disability. The cause of neck pain is multifactorial and osteoarthritis is one potential cause. The cervical spine facet joints have been implicated in the aetiology of chronic neck pain. Hence, a detailed description of their anatomy and age......- and gender related changes is needed. METHODS: The lower four cervical spine segments (C4-C7 included) were obtained from 72 subjects during autopsy; 29 females (median age 53 years [22-77]) and 43 males (median age 38 years [20-78]). A total of 1132 articular facets were embedded in toto in hard plastic...

Desmoid type fibromatosis in the facet joint of lumbar spine: Case report and review of literature

Energy Technology Data Exchange (ETDEWEB)

Kim, So Jung; Ha, Doo Hoe; Lee, Sang Min; Kang, Hae Youn [CHA Bundang Medical Center, CHA University, Seongnam (Korea, Republic of)

2013-10-15

Desmoid type fibromatosis is a benign fibroblastic tumor arising from the fascia or musculoaponeurosis. It may occur in various locations, but most commonly in the shoulder girdle and neck; to our knowledge, there has been no reported case originating from a facet joint of the spine. We report CT and MR imaging findings of a desmoid type fibromatosis, involving the facet joint of the L3-4 spine with bone involvement.

Association between facet joint osteoarthritis and the Oswestry Disability Index.

Science.gov (United States)

Maataoui, Adel; Vogl, Thomas J; Middendorp, Marcus; Kafchitsas, Konstantinos; Khan, M Fawad

2014-11-28

To investigate the correlation of facet joint osteoarthritis (FJOA) at lumbar levels L4/L5 and L5/S1 and the Oswestry Disability Index (ODI). The study involved lumbar MRIs of 591 patients with a mean age of 47.3 years. The MRIs of the lumbar spine were performed on a 1.5 Tesla scanner (Magnetom(®) Avanto, Siemens AG, Erlangen, Germany) using a dedicated receive only spine coil. After initial blinding, each dataset was evaluated by 2 board certified radiologist with more than 5 years experience in musculoskeletal imaging. In total 2364 facet joints were graded. Degenerative changes of the facet joints were evaluated according to the 4-point scale as proposed by Weishaupt et al Functional status was assessed using the ODI. The index is scored from 0 to 100 and interpreted as follows: 0%-20%, minimal disability; 20%-40%, moderate disability; 40%-60%, severe disability; 60%-80%, crippled; 80%-100%, patients are bedbound. Spearman's coefficient of rank correlation was used for statistical analysis, with significance set at P disability had a minimum of 0% and a maximum of 91.11% with an arithmetic mean of 32.77% ± 17.02%. The majority of patients (48.39%) had moderate functional disability (21%-40%). There was no significant correlation between FJOA and ODI on both sides of lumbar level L4/5 and on the left side of lumbar level L5/S1. A weak positive correlation was evaluated between ODI and FJOA on the right side of lumbar level L5/S1. The missing correlation of FJOA and ODI confirms our clinical experience that imaging alone is an insufficient approach explaining low back pain. Clinical correlation is imperative for an adequate diagnostic advance in patients with low back pain.

The possibility of the radiological and ultrasonographic examination of the facet joints of the equine thoracic and lumbar spine

International Nuclear Information System (INIS)

Reisinger, R.

2003-03-01

The facet joints of the equine thoracic and lumbar spine were examined by radiology and ultrasonography in 31 and 20 standing horses, respectively. The employed methods were evaluated. The left and right joints of 15/31 standing horses were comparatively x-rayed with both 20 o ventral oblique and 30 o dorsal oblique techniques. The independent evaluation of the ensuing films by four experienced veterinary surgeons yielded a significantly better assessment of the tested parameters in the 20 o ventral oblique technique. It was possible to depict the facet joints of the right and left sides between the caudal margin of the scapula and the diaphragm with the pulmonary field as background rich in contrast. In 20 horses, the facet joints were examined from Th10 to L6 in longitudinal and sagittal planes. A linear-array ultrasound probe with a frequency of 7,5 MHz and a convex ultrasound probe with a frequency of 3,5 MHz were used. Depending on the nutritional state, the soft tissue structures could be evaluated. The evaluation of the facet joints themselves was very limited. (author)

Bipolar Radiofrequency Facet Ablation of the Lumbar Facet Capsule: An Adjunct to Conventional Radiofrequency Ablation for Pain Management.

Science.gov (United States)

Jacobson, Robert E; Palea, Ovidiu; Granville, Michelle

2017-09-01

Radiofrequency facet ablation (RFA) has been performed using the same technique for over 50 years. Except for variations in electrode size, tip shape, and change in radiofrequency (RF) stimulation parameters, using standard, pulsed, and cooled RF wavelengths, the target points have remained absolutely unchanged from the original work describing RFA for lumbar pain control. Degenerative changes in the facet joint and capsule are the primary location for the majority of lumbar segmental pathology and pain. Multiple studies show that the degenerated facet joint is richly innervated as a result of the inflammatory overgrowth of the synovium. The primary provocative clinical test to justify an RFA is to perform an injection with local anesthetic into the facet joint and the posterior capsule and confirm pain relief. However, after a positive response, the radiofrequency lesion is made not to the facet joint but to the more proximal fine nerve branches that innervate the joint. The accepted target points for the recurrent sensory branch ignore the characteristic rich innervation of the pathologic lumbar facet capsule and assume that lesioning of these recurrent branches is sufficient to denervate the painful pathologic facet joint. This report describes the additional targets and technical steps for further coagulation points along the posterior capsule of the lumbar facet joint and the physiologic studies of the advantage of the bipolar radiofrequency current in this location. Bipolar RF to the facet capsule is a simple, extra step that easily creates a large thermo-coagulated lesion in this capsule region of the pathologic facet joint. Early studies demonstrate bipolar RF to the facet capsule can provide long-term pain relief when used alone for specific localized facet joint pain, to coagulate lumbar facet cysts to prevent recurrence, and to get more extensive pain control by combining it with traditional lumbar RFA, especially when RFA is repeated.

Fluoroscopy-guided intrA-articular facet joint steroid injection for the management of low back pain: Therapeutic effectiveness and arthrographic pattern

International Nuclear Information System (INIS)

Kim, Su Jin; Lee, Jun Woo; Lee, Guen Young; You, Ja Yeon; Kang, Heung Sik; Chai, Jae Won; Ahn, Joong Mo

2015-01-01

To evaluate the effectiveness of fluoroscopy-guided intra-articular facet joint steroid injection for the management of low back pain, and to document the incidence of epidural leakage. In total, 320 facet joint injections of 244 consecutive patients were included in this study. All patients had undergone an intra-articular facet joint steroid injection in 2007 and had follow-up post-treatment medical records. The response to treatment was analyzed on the basis of chart documentation (aggravated, no change, slightly improved, much improved, no pain). Fluoroscopic arthrograms of the injections were retrospectively analyzed by two radiologists. Of the 244 patients, 85.2% (n = 208) showed improvement after an initial intra-articular facet joint steroid injection. A total of 77.9% (n = 162) of the patients showed symptom recurrence, with a median of a 69 day symptom-free interval, while 30.3% (n = 74) of the patients showed symptom-free intervals of more than six months. Overall, 74 (33.3%) of the 222 cases of intra-articular facet joint steroid injections without concomitant epidural steroid injection showed epidural leakage in fluoroscopic arthrograms. Fluoroscopy-guided intra-articular facet joint injection is a reliable technique for the management of low back pain, with excellent immediate effectiveness and good prolonged (> 2 months) pain relief. Epidural leakage during injection was detected in one-third of the cases

Fluoroscopy-guided intrA-articular facet joint steroid injection for the management of low back pain: Therapeutic effectiveness and arthrographic pattern

Energy Technology Data Exchange (ETDEWEB)

Kim, Su Jin; Lee, Jun Woo; Lee, Guen Young; You, Ja Yeon; Kang, Heung Sik [Dept. of Radiology, Seoul National University Bundang Hospital, Seoul National University College of Medicine, Seongnam (Korea, Republic of); Chai, Jae Won [Dept. of Radiology, SMG-SNU Boramae Medical Center, Seoul (Korea, Republic of); Ahn, Joong Mo [Dept. of Radiology, University of Pittsburgh Medical Center, Pittsburgh (United States)

2015-09-15

To evaluate the effectiveness of fluoroscopy-guided intra-articular facet joint steroid injection for the management of low back pain, and to document the incidence of epidural leakage. In total, 320 facet joint injections of 244 consecutive patients were included in this study. All patients had undergone an intra-articular facet joint steroid injection in 2007 and had follow-up post-treatment medical records. The response to treatment was analyzed on the basis of chart documentation (aggravated, no change, slightly improved, much improved, no pain). Fluoroscopic arthrograms of the injections were retrospectively analyzed by two radiologists. Of the 244 patients, 85.2% (n = 208) showed improvement after an initial intra-articular facet joint steroid injection. A total of 77.9% (n = 162) of the patients showed symptom recurrence, with a median of a 69 day symptom-free interval, while 30.3% (n = 74) of the patients showed symptom-free intervals of more than six months. Overall, 74 (33.3%) of the 222 cases of intra-articular facet joint steroid injections without concomitant epidural steroid injection showed epidural leakage in fluoroscopic arthrograms. Fluoroscopy-guided intra-articular facet joint injection is a reliable technique for the management of low back pain, with excellent immediate effectiveness and good prolonged (> 2 months) pain relief. Epidural leakage during injection was detected in one-third of the cases.

Up-regulation of p55 TNF alpha-receptor in dorsal root ganglia neurons following lumbar facet joint injury in rats.

Science.gov (United States)

Sakuma, Yoshihiro; Ohtori, Seiji; Miyagi, Masayuki; Ishikawa, Tetsu; Inoue, Gen; Doya, Hideo; Koshi, Takana; Ito, Toshinori; Yamashita, Masaomi; Yamauchi, Kazuyo; Suzuki, Munetaka; Moriya, Hideshige; Takahashi, Kazuhisa

2007-08-01

The rat L5/6 facet joint is multisegmentally innervated from the L1 to L6 dorsal root ganglia (DRG). Tumor necrosis factor (TNF) is a known mediator of inflammation. It has been reported that satellite cells are activated, produce TNF and surround DRG neurons innervating L5/6 facet joints after facet injury. In the current study, changes in TNF receptor (p55) expression in DRG neurons innervating the L5/6 facet joint following facet joint injury were investigated in rats using a retrograde neurotransport method followed by immunohistochemistry. Twenty rats were used for this study. Two crystals of Fluorogold (FG; neurotracer) were applied into the L5/6 facet joint. Seven days after surgery, the dorsal portion of the capsule was cut in the injured group (injured group n = 10). No injury was performed in the non-injured group (n = 10). Fourteen days after the first application of FG, bilateral DRGs from T13 to L6 levels were resected and sectioned. They were subsequently processed for p55 immunohistochemistry. The number of FG labeled neurons and number of FG labeled p55-immunoreactive (IR) neurons were counted. FG labeled DRG neurons innervating the L5/6 facet joint were distributed from ipsilateral L1 to L6 levels. Of FG labeled neurons, the ratio of DRG neurons immunoreactive for p55 in the injured group (50%) was significantly higher than that in the non-injured group (13%). The ratio of p55-IR neurons of FG labeled DRG neurons was significantly higher in total L1 and L2 DRGs than that in total L3, 4, 5 and 6 DRGs in the injured group (L1 and 2 DRG, 67%; L3, 4, 5 and 6 DRG, 37%, percentages of the total number of p55-IR neurons at L1 and L2 level or L3-6 level/the total number of FG-labeled neurons at L1 and L2 level or L3-6 level). These data suggest that up-regulation of p55 in DRG neurons may be involved in the sensory transmission from facet joint injury. Regulation of p55 in DRG neurons innervating the facet joint was different between upper DRG innervated

A new technique to treat facet joint pain with pulsed radiofrequency.

Science.gov (United States)

Schianchi, Pietro Martino

2015-02-01

Facet joint pain affects 5% to 15% of the population with low back pain and the prevalence increases with age due to progression of arthritis. While conservative treatments are often unsuccessful, the scientific evidence on minimally invasive therapies such as intra-articular steroid infiltration and continuous and pulsed radiofrequency (PRF) of the medial branches is contradictory. Since PRF has recently been reported to successfully treat joint pain, a new application of this method is proposed for facetogenic lumbar pain via an intra-articular subcapsular approach. Here we reported two cases with successful treatment. A 71-year-old patient presented because of persisting pain in the left gluteal region radiating to the lateral thigh and calf when standing. Anti-inflammatory drugs produced only short-lasting insufficient relief. A 52-year-old employee was admitted in June 2012 because of axial lower lumbar pain with intermittent diffuse radiation to the right lower extremity that worsened during walking and lying down despite receiving analgesics and physiotherapy. A new approach to treat lumbar facet joint pain with PRF is simple to perform and without serious complications. In view of the good long-lasting results obtained with the two reported cases, randomized control trials are necessary to validate this new approach.

Rotatory Subluxation and Facet Deformity in the Atlanto-occipital Joint in Patients with Chronic Atlantoaxial Rotatory Fixation: Two Case Reports.

Science.gov (United States)

Kashii, Masafumi; Masuhara, Kenta; Kaito, Takashi; Iwasaki, Motoki

2017-01-01

The relationship between the morphometry of atlantoaxial joint and chronic atlantoaxial rotatory fixation (AARF) is well known, but disorders in the atlanto-occipital joint in chronic AARF are not fully elucidated. The authors report two rare cases of secondary deformities in the atlanto-occipital joint in chronic AARF. Two patients with chronic AARF were treated with closed manipulation, skull traction and halo-vest immobilization. Clinical outcomes and radiographs were reviewed retrospectively, focusing on pathological changes in the atlanto-occipital joint using multiplanar reconstruction computed tomography and three-dimensional computed tomography images. Case 1 (12-year-old girl) had rotatory subluxation with a superior facet deformity of the atlas in the atlanto-occipital joint before the initiation of treatment. After a series of conservative treatments, both atlantoaxial and atlanto-occipital rotatory fixation could not be reduced, and both the superior facet deformity of the atlas and osteoarthritic changes in the atlanto-occipital developed. She was monitored without surgery because the disorder progressed to the spontaneous fusion of the occipital bone to the axis. Case 2 (13-year-old boy) had rotatory subluxation without facet deformity of the atlas in the atlanto-occipital joint before the initiation of treatment. However, both the superior facet deformity of the atlas and osteoarthritic changes in the atlanto-occipital developed over time, and both atlantoaxial and atlanto-occipital rotatory fixation could not be reduced after a series of conservative treatments. He still had severe neck pain and severely restricted neck mobility and underwent spinal fusion. Atlanto-occipital rotatory subluxation and facet deformity in the atlanto-occipital joint may occur after prolonged AARF. It is necessary to pay attention to pathological changes not only in the atlantoaxial joint but also in the atlanto-occipital joint, when orthopedic surgeons treat patients

Biomechanical evaluation of the impact of various facet joint lesions on the primary stability of anterior plate fixation in cervical dislocation injuries: a cadaver study: Laboratory investigation.

Science.gov (United States)

Oberkircher, Ludwig; Born, Sebastian; Struewer, Johannes; Bliemel, Christopher; Buecking, Benjamin; Wack, Christina; Bergmann, Martin; Ruchholtz, Steffen; Krüger, Antonio

2014-10-01

Injuries of the subaxial cervical spine including facet joints and posterior ligaments are common. Potential surgical treatments consist of anterior, posterior, or anterior-posterior fixation. Because each approach has its advantages and disadvantages, the best treatment is debated. This biomechanical cadaver study compared the effect of different facet joint injuries on primary stability following anterior plate fixation. Fractures and plate fixation were performed on 15 fresh-frozen intact cervical spines (C3-T1). To simulate a translation-rotation injury in all groups, complete ligament rupture and facet dislocation were simulated by dissecting the entire posterior and anterior ligament complex between C-4 and C-5. In the first group, the facet joints were left intact. In the second group, one facet joint between C-4 and C-5 was removed and the other side was left intact. In the third group, both facet joints between C-4 and C-5 were removed. The authors next performed single-level anterior discectomy and interbody grafting using bone material from the respective thoracic vertebral bodies. An anterior cervical locking plate was used for fixation. Continuous loading was performed using a servohydraulic test bench at 2 N/sec. The mean load failure was measured when the implant failed. In the group in which both facet joints were intact, the mean load failure was 174.6 ± 46.93 N. The mean load failure in the second group where only one facet joint was removed was 127.8 ± 22.83 N. In the group in which both facet joints were removed, the mean load failure was 73.42 ± 32.51 N. There was a significant difference between the first group (both facet joints intact) and the third group (both facet joints removed) (p cadaver study, primary stability of anterior plate fixation for dislocation injuries of the subaxial cervical spine was dependent on the presence of the facet joints. If the bone in one or both facet joints is damaged in the clinical setting, anterior plate

A New Technique for the Treatment of Lumbar Facet Joint Syndrome Using Intra-articular Injection with Autologous Platelet Rich Plasma.

Science.gov (United States)

Wu, Jiuping; Du, Zhenwu; Lv, Yang; Zhang, Jun; Xiong, Wei; Wang, Ruiqiang; Liu, Rui; Zhang, Guizhen; Liu, Qinyi

2016-01-01

Lumbar facet joint syndrome is currently suggested to be a main source of axial low back pain, and a large portion of axial low back pain is caused by disorders in lumbar facet joints. Intra-articular injection is one of the most common treatment methods in the early clinical application. Therefore, we attempt to seek a new injectable material, autologous platelet rich plasma (PRP), to treat lumbar facet syndrome, as well as to assess its therapeutic effectiveness and safety. A prospective clinic evaluation. The outpatient clinic of a single academic medical center. Total 19 patients with lumbar facet joint syndrome (8 men, 11 women; mean ages: 52.53 ± 6.79 years, range: 38 - 62 years) were enrolled to receive lumbar facet joint injection with autologous PRP under x-ray fluoroscopic control. Patients were followed up immediately, at one week, one month, 2 months, and 3 months following treatment, and the elements of this analysis included low back pain visual analogue scale (VAS) at rest and during flexion, Roland-Morris Disability Questionnaire (RMQ), Oswestry Disability Index (ODI), and modified MacNab criteria for the pain relief. All the 19 patients completed the intra-articular injections with autologous PRP successfully. At one week after treatment, low back pain reduced significantly compared with prior to treatment both at rest and during flexion. The outcomes were assessed as "good" or "excellent" for 9 patients (47.37%) immediately after treatment, 14 patients (73.68%) at one week, 15 patients (78.95%) at one month, 15 patients (78.95%) at 2 months, and 15 patients (78.95%) at 3 months. Statistically significant differences were observed based on RMQ and a more than 10% improvement in lumbar functional capacity was observed based on ODI between pre-treatment and post-treatment. In addition, there were no severe relevant complications during the whole process of injection and follow-up period. A control group and the curative effect observations with

Assessment of trunk muscle density using CT and its association with degenerative disc and facet joint disease of the lumbar spine.

Science.gov (United States)

Sebro, Ronnie; O'Brien, Liam; Torriani, Martin; Bredella, Miriam A

2016-09-01

The purpose of this study was (1) to evaluate the association of trunk muscle density assessed by computed tomography (CT) with age, gender, and BMI and (2) to evaluate the association between trunk muscle CT density and degenerative disc and facet joint disease of the lumbar spine. The study was IRB approved and HIPAA compliant. The study group comprised 100 subjects (mean age 44.4 ± 22.2 years, 51 % male) who underwent CT of the abdomen and pelvis without intravenous contrast. Exclusion criteria included prior abdominal or spine surgery, active malignancy and scoliosis. CTs were reviewed and the attenuation of the rectus abdominis, transverse abdominis, internal and external obliques, psoas, multifidus, longissimus and gluteus maximus were measured bilaterally at consistent levels. Degenerative disc and bilateral facet joint disease were scored using established methods. Univariate analyses were performed using linear regression. Multivariate linear regression was performed to adjust for age, gender and BMI. CT density of each trunk muscle correlated inversely with age (p degenerative disc and facet joint disease in the univariate analyses (p degenerative disc and facet joint disease respectively in the multivariate analysis. Fatty infiltration of trunk musculature increases with age and BMI. Fatty infiltration of the gluteus maximus and transverse abdominis are associated with degenerative disc and facet joint disease, independent of age, gender and BMI.

Comparative Analysis of Bone Structural Parameters Reveals Subchondral Cortical Plate Resorption and Increased Trabecular Bone Remodeling in Human Facet Joint Osteoarthritis

Directory of Open Access Journals (Sweden)

Cordula Netzer

2018-03-01

Full Text Available Facet joint osteoarthritis is a prominent feature of degenerative spine disorders, highly prevalent in ageing populations, and considered a major cause for chronic lower back pain. Since there is no targeted pharmacological therapy, clinical management of disease includes analgesic or surgical treatment. The specific cellular, molecular, and structural changes underpinning facet joint osteoarthritis remain largely elusive. The aim of this study was to determine osteoarthritis-related structural alterations in cortical and trabecular subchondral bone compartments. To this end, we conducted comparative micro computed tomography analysis in healthy (n = 15 and osteoarthritic (n = 22 lumbar facet joints. In osteoarthritic joints, subchondral cortical plate thickness and porosity were significantly reduced. The trabecular compartment displayed a 42 percent increase in bone volume fraction due to an increase in trabecular number, but not trabecular thickness. Bone structural alterations were associated with radiological osteoarthritis severity, mildly age-dependent but not gender-dependent. There was a lack of association between structural parameters of cortical and trabecular compartments in healthy and osteoarthritic specimens. The specific structural alterations suggest elevated subchondral bone resorption and turnover as a potential treatment target in facet joint osteoarthritis.

Randomised sham-controlled double-blind multicentre clinical trial to ascertain the effect of percutaneous radiofrequency treatment for lumbar facet joint pain.

Science.gov (United States)

van Tilburg, C W J; Stronks, D L; Groeneweg, J G; Huygen, F J P M

2016-11-01

The aim of this study was to compare the effect of a percutaneous radiofrequency heat lesion at the medial branch of the primary dorsal ramus with a sham procedure, for the treatment of lumbar facet joint pain. A randomised sham-controlled double blind multicentre trial was carried out at the multidisciplinary pain centres of two hospitals. A total of 60 patients aged > 18 years with a history and physical examination suggestive of facet joint pain and a decrease of ≥ 2 on a numerical rating scale (NRS 0 to 10) after a diagnostic facet joint test block were included. In the treatment group, a percutaneous radiofrequency heat lesion (80 o C during 60 seconds per level) was applied to the medial branch of the primary dorsal ramus. In the sham group, the same procedure was undertaken without for the radiofrequency lesion. Both groups also received a graded activity physiotherapy programme. The primary outcome measure was decrease in pain. A secondary outcome measure was the Global Perceived Effect scale (GPE). There was a statistically significant effect on the level of pain in the factor Period (T0-T1). However, there was no statistically significant difference with the passage of time between the groups (Group × Period) or in the factor Group. In the crossover group, 11 of 19 patients had a decrease in NRS of ≥ 2 at one month crossover (p = 0.65). There was no statistically significant difference in satisfaction with the passage of time between the groups (Group × Period). The independent factors Group and Period also showed no statistically significant difference. There was no statistically significant Group × Period effect for recovery, neither an effect of Group or of Period. The null hypothesis of no difference in the decrease in pain and in GPE between the treatment and sham groups cannot be rejected. Post hoc analysis revealed that the age of the patients and the severity of the initial pain significantly predicted a positive outcome. Cite this article

CT-guided intradiscal ozone injection combined with intervertebral facet joint steroid injection for lumbar disk herniation accompanied with intervertebral arthritis

International Nuclear Information System (INIS)

Zhang Li; Chen Zhaohui; Sun Xijun; Liu Jianping; Li Jiakai

2009-01-01

Objective: To compare the clinical effectiveness of ozone (O 3 ) nucleus pulposus ablation only with that of O 3 nucleus pulposus ablation combined with intervertebral facet joint injection of compound Betamethasome in treating lumbar disk herniation accompanied with intervertebral facet arthritis. Methods: Eighty patients with lumbar disk herniation and intervertebral facet arthritis were equally and randomly divided into two groups. Under CT guidance, O 3 nucleus pulposus ablation was performed in patients of group A(n=40), while O 3 nucleus pulposus ablation combined with intervertebral facet joint injection of compound Betamethasome (0.5-1 ml) was carried out in patients of group B(n=40). Using double blind method the therapeutic effectiveness was evaluated before and 1 week,3,6-months after the procedure by an Oswestry Low Back Pain Disability Questionnaire. Results: One week after the procedure the effective rate of group A and group B was 65% and 82.5% respectively. Three and six months after the treatment, the effective rate was 75% and 70% respectively for group A, while it was 90% and 92.5% respectively for group B. The difference between two groups was significant (P 3 combined with intervertebral facet joint injection of compound Betamethasome is an effective and safe treatment for lumbar disk herniation accompanied with intervertebral facet arthritis.It is worth popularizing this technique in clinical practice. (authors)

Lumbar disc degeneration was not related to spine and hip bone mineral densities in Chinese: facet joint osteoarthritis may confound the association.

Science.gov (United States)

Pan, Jianjiang; Lu, Xuan; Yang, Ge; Han, Yongmei; Tong, Xiang; Wang, Yue

2017-12-01

A sample of 512 Chinese was studied and we observed that greater disc degeneration on MRI was associated with greater spine DXA BMD. Yet, this association may be confounded by facet joint osteoarthritis. BMD may not be a risk factor for lumbar disc degeneration in Chinese. Evidence suggested that lumbar vertebral bone and intervertebral disc interact with each other in multiple ways. The current paper aims to determine the association between bone mineral density (BMD) and lumbar disc degeneration using a sample of Chinese. We studied 165 patients with back disorders and 347 general subjects from China. All subjects had lumbar spine magnetic resonance (MR) imaging and dual- energy X-ray absorptiometry (DXA) spine BMD studies, and a subset of general subjects had additional hip BMD measurements. On T2-weighted MR images, Pfirrmann score was used to evaluate the degree of lumbar disc degeneration and facet joint osteoarthritis was assessed as none, slight-moderate, and severe. Regression analyses were used to examine the associations between lumbar and hip BMD and disc degeneration, adjusting for age, gender, body mass index (BMI), lumbar region, and facet joint osteoarthritis. Greater facet joint osteoarthritis was associated with greater spine BMD (P osteoarthritis entered the regression model, however, greater spine BMD was associated with greater facet joint osteoarthritis (P  0.05). No statistical association was observed between spine BMD and lumbar disc degeneration in patients with back disorders (P > 0.05), and between hip BMD and disc degeneration in general subjects (P > 0.05). BMD may not be a risk factor for lumbar disc degeneration in Chinese. Facet joint osteoarthritis inflates DXA spine BMD measurements and therefore, may confound the association between spine BMD and disc degeneration.

Assessment of trunk muscle density using CT and its association with degenerative disc and facet joint disease of the lumbar spine

International Nuclear Information System (INIS)

Sebro, Ronnie; O'Brien, Liam; Torriani, Martin; Bredella, Miriam A.

2016-01-01

The purpose of this study was (1) to evaluate the association of trunk muscle density assessed by computed tomography (CT) with age, gender, and BMI and (2) to evaluate the association between trunk muscle CT density and degenerative disc and facet joint disease of the lumbar spine. The study was IRB approved and HIPAA compliant. The study group comprised 100 subjects (mean age 44.4 ± 22.2 years, 51 % male) who underwent CT of the abdomen and pelvis without intravenous contrast. Exclusion criteria included prior abdominal or spine surgery, active malignancy and scoliosis. CTs were reviewed and the attenuation of the rectus abdominis, transverse abdominis, internal and external obliques, psoas, multifidus, longissimus and gluteus maximus were measured bilaterally at consistent levels. Degenerative disc and bilateral facet joint disease were scored using established methods. Univariate analyses were performed using linear regression. Multivariate linear regression was performed to adjust for age, gender and BMI. CT density of each trunk muscle correlated inversely with age (p < 0.001) and BMI (p < 0.001). CT density of each trunk muscle correlated inversely with degenerative disc and facet joint disease in the univariate analyses (p < 0.001); however, only the gluteus maximus and the transverse abdominis remained significant predictors of degenerative disc and facet joint disease respectively in the multivariate analysis. Fatty infiltration of trunk musculature increases with age and BMI. Fatty infiltration of the gluteus maximus and transverse abdominis are associated with degenerative disc and facet joint disease, independent of age, gender and BMI. (orig.)

Sacroiliac joint dysfunction.

Science.gov (United States)

Ilaslan, Hakan; Arslan, Ahmet; Koç, Omer Nadir; Dalkiliç, Turker; Naderi, Sait

2010-07-01

Sacroiliac joint dysfunction is a disorder presenting with low back and groin pain. It should be taken into consideration during the preoperative differential diagnosis of lumbar disc herniation, lumbar spinal stenosis and facet syndrome. Four cases with sacroiliac dysfunction are presented. The clinical and radiological signs supported the evidence of sacroiliac dysfunction, and exact diagnosis was made after positive response to sacroiliac joint block. A percutaneous sacroiliac fixation provided pain relief in all cases. The mean VAS scores reduced from 8.2 to 2.2. It is concluded that sacroiliac joint dysfunction diagnosis requires a careful physical examination of the sacroiliac joints in all cases with low back and groin pain. The diagnosis is made based on positive response to the sacroiliac block. Sacroiliac fixation was found to be effective in carefully selected cases.

Facet orientation and tropism: associations with spondylolysis.

Science.gov (United States)

Kalichman, Leonid; Guermazi, Ali; Li, Ling; Hunter, David J; Suri, Pradeep

2010-04-01

Cross-sectional study. To evaluate the association between lumbar spine facet joint orientation, facet joint tropism, and spondylolysis identified by multidetector computed tomography (CT) in the community-based Framingham Heart Study. The association between lumbar spondylolysis and facet orientation and tropism remains unclear. This study was an ancillary project to the Framingham Heart Study. Three thousand five hundred twenty-nine participants of the Framingham Heart Study aged 40 to 80 years underwent multidetector CT imaging to assess aortic calcification. One hundred ninety-one subjects were included in this ancillary study. Facet joint features and spondylolysis were evaluated on CT scans. The final analyzed sample included 104 men with mean age 51.90+/-11.25 years and 84 women with mean age 53.61+/-10.20 years. The association between spondylolysis and facet orientation and tropism was examined using univariate and multivariate analyses. Spondylolysis was prevalent in 11.5% of the total population. chi2 test demonstrated a significant sex difference in prevalence of spondylolysis (P=0.0154), with almost 3 times higher prevalence among men. There was no statistically significant difference in facet orientation and continuous facet tropism between individuals with and without spondylolysis at the L5 level (P=0.49 to 0.91). After adjustment for age, sex, and body mass index, no significant association between the occurrence of spondylolysis and facet orientation and tropism was found. In the studied sample the prevalence of facet joint osteoarthritis was significantly higher in individuals with spondylolysis than in those without spondylolysis at both sides of L4-L5 spinal level (P=0.044 at the right side and P=0.003 at the left side) and at left side of L5-S1 level (P=0.038). We did not find an association between facet orientation, facet tropism, and spondylolysis. One of the possible explanations for this is that the high prevalence of facet joint

Treatment of lumbar facet joint syndrome by CT-guided intraarticular infiltration of fact joints; Behandlung des lumbalen Facettensyndroms durch CT-gesteuerte Infiltration der Zwischenwirbelgelenke

Energy Technology Data Exchange (ETDEWEB)

Schleifer, J. [Knappschaftsklinik Puettlingen/Saar (Germany). Orthopaedische Abteilung; Fenzl, G. [Knappschaftsklinik Puettlingen/Saar (Germany). Orthopaedische Abteilung; Wolf, A. [Knappschaftsklinik Puettlingen/Saar (Germany). Radiologische Abteilung; Diehl, K. [Knappschaftsklinik Puettlingen/Saar (Germany). Radiologische Abteilung

1994-11-01

In 62 patients with facet syndrome a total of 205 joints were infiltrated, CT monitoring being used in all cases. Each facet joint was infiltrated with 0.3 ml bupivacaine and 0.8 ml methylprednisolone. The patients were divided into three groups. Group 1 consisted of 24 persons who had undergone lumbar disc surgery, group 2 of 23 patients with spondylarthrosis of the facet joints, and group 3 of 15 patients who had undergone lumbar disc surgery but hat additional spondylarthrosis. Very good results were defined as pain relief for longer than 4 weeks, good results as pain relief for up to 4 weeks and poor results as brief pain relief or none at all. In 27 patients facet infiltration was performed for the purpose of diagnosis. Results were significantly in group 2 than in group 1. In group 3 results were better than in group 1, but worse than in group 2. These differences were not statistical by significant. Seven patients in the diagnostic group had no pain relief, and facet syndrome was excluded. (orig.) [Deutsch] Bei 62 Patienten mit lumbalem Facettensyndrom wurden insgesamt 205 Zwischenwirbelgelenke (Facettengelenke) perkutan CT-gesteuert infiltriert. Je Gelenk wurden 0,3 ml Bupivacain und 0,8 ml Methylprednisolon intraartikulaer infiziert. Die Patienten wurden in 3 Gruppen unterteilt. Die 1. Gruppe umfasste 24 Patienten mit Postnukleotomiesyndrom, die 2. Gruppe 23 Patienten mit spondylarthrotischen Veraenderungen, die 3. Gruppe 15 bandscheibenoperierte Patienten mit zusaetzlicher Spondylarthrose. In Gruppe 2 fanden sich signifikant bessere Ergebnisse als in Gruppe 1. Gute Resultate ergab auch die dritte Gruppe, sie waren jedoch nicht signifikant besser als die der Gruppe 1. Die sorgfaeltige Auswahl der Patienten ist fuer den Erfolg der Behandlung entscheidend. Die Infiltrationsbehandlung der Zwischenwirbelgelenke hat nahezu keine Nebenwirkungen. Ausser zur Therapie wird das Verfahren diagnostisch zum Ausschluss eines Facettensyndromes im Rahmen der Abklaerung

Osseous associated cervical spondylomyelopathy at the C2-C3 articular facet joint in 11 dogs.

Science.gov (United States)

Cooper, C; Gutierrez-Quintana, R; Penderis, J; Gonçalves, R

2015-11-21

In dogs, vertebral canal stenosis at C2-C3 due to articular facet joint degeneration is only sporadically identified. The authors' aims were to review the clinical presentation, MRI characteristics, treatment and outcome of dogs presenting with this condition. Eleven cases were eligible for inclusion. Neurological examination revealed tetraparesis and proprioceptive ataxia in all 4 limbs in 3/11, proprioceptive tetra-ataxia only in 4/11, pelvic limb proprioceptive ataxia in 2/11 and no gait abnormalities in 2/11 dogs. Cervical hyperaesthesia was present in 7/11 dogs. MRI revealed bilateral articular facet joint degeneration in 10/11 cases and unilateral degeneration in one. Surgery was performed in six cases and medical management elected in five. Long-term follow-up information was available for 11 animals. Four of the surgical cases are alive and have no neurological deficits, one was euthanased for an unrelated condition and one lost to follow-up. Of the cases managed medically, three are alive showing no neurological deficits, one is alive still displaying neurological deficits and one euthanased for an unrelated condition whilst still ataxic. This study shows that both medical and surgical management can result in good outcomes in dogs with vertebral canal stenosis resulting from articular facet joint degeneration at the level of C2-C3. British Veterinary Association.

Lumbar Facet Joint Compressive Injury Induces Lasting Changes in Local Structure, Nociceptive Scores, and Inflammatory Mediators in a Novel Rat Model

Directory of Open Access Journals (Sweden)

James L. Henry

2012-01-01

Full Text Available Objective. To develop a novel animal model of persisting lumbar facet joint pain. Methods. Sprague Dawley rats were anaesthetized and the right lumbar (L5/L6 facet joint was exposed and compressed to ~1 mm with modified clamps applied for three minutes; sham-operated and naïve animals were used as control groups. After five days, animals were tested for hind-paw sensitivity using von Frey filaments and axial deep tissue sensitivity by algometer on assigned days up to 28 days. Animals were sacrificed at selected times for histological and biochemical analysis. Results. Histological sections revealed site-specific loss of cartilage in model animals only. Tactile hypersensitivity was observed for the ipsi- and contralateral paws lasting 28 days. The threshold at which deep tissue pressure just elicited vocalization was obtained at three lumbar levels; sensitivity at L1>L3/4>L6. Biochemical analyses revealed increases in proinflammatory cytokines, especially TNF-α, IL-1α, and IL-1β. Conclusions. These data suggest that compression of a facet joint induces a novel model of local cartilage loss accompanied by increased sensitivity to mechanical stimuli and by increases in inflammatory mediators. This new model may be useful for studies on mechanisms and treatment of lumbar facet joint pain and osteoarthritis.

The clinical aspects of the acute facet syndrome

DEFF Research Database (Denmark)

Hestbaek, Lise; Kongsted, Alice; Jensen, Tue Secher

2009-01-01

ABSTRACT: BACKGROUND: The term 'acute facet syndrome' is widely used and accepted amongst chiropractors, but poorly described in the literature, as most of the present literature relates to chronic facet joint pain. Therefore, research into the degree of consensus on the subject amongst a large g...... from the facet joints has been described in the literature. Furthermore, the acute, uncomplicated facet syndrome was considered to have an uncomplicated clinical course, responding quickly to spinal manipulative therapy....

Joint kinetic determinants of starting block performance in athletic sprinting.

Science.gov (United States)

Brazil, Adam; Exell, Timothy; Wilson, Cassie; Willwacher, Steffen; Bezodis, Ian N; Irwin, Gareth

2018-07-01

The aim of this study was to explore the relationships between lower limb joint kinetics, external force production and starting block performance (normalised average horizontal power, NAHP). Seventeen male sprinters (100 m PB, 10.67 ± 0.32 s) performed maximal block starts from instrumented starting blocks (1000 Hz) whilst 3D kinematics (250 Hz) were also recorded during the block phase. Ankle, knee and hip resultant joint moment and power were calculated at the rear and front leg using inverse dynamics. Average horizontal force applied to the front (r = 0.46) and rear (r = 0.44) block explained 86% of the variance in NAHP. At the joint level, many "very likely" to "almost certain" relationships (r = 0.57 to 0.83) were found between joint kinetic data and the magnitude of horizontal force applied to each block although stepwise multiple regression revealed that 55% of the variance in NAHP was accounted for by rear ankle moment, front hip moment and front knee power. The current study provides novel insight into starting block performance and the relationships between lower limb joint kinetic and external kinetic data that can help inform physical and technical training practices for this skill.

Evaluation of Facet Joint Arthrosis in Stenotic and Normal Lumbar Spines with MRI

Directory of Open Access Journals (Sweden)

Ebru Ozan

2013-10-01

Full Text Available Aim: To reveal the prevalence of lumbar facet joint arthrosis in normal and stenotic lumbar spines with magnetic resonance imaging. Material and Method: Study group consisted of 30 patients with complaints and findings of lower back pain, neurologic claudicatio and lumbar spinal stenosis detected at L3-4, L4-5 and/or L5-S1 with magnetic resonance imaging (cross section area of the dural sac

FacetGist: Collective Extraction of Document Facets in Large Technical Corpora.

Science.gov (United States)

Siddiqui, Tarique; Ren, Xiang; Parameswaran, Aditya; Han, Jiawei

2016-10-01

Given the large volume of technical documents available, it is crucial to automatically organize and categorize these documents to be able to understand and extract value from them. Towards this end, we introduce a new research problem called Facet Extraction. Given a collection of technical documents, the goal of Facet Extraction is to automatically label each document with a set of concepts for the key facets ( e.g. , application, technique, evaluation metrics, and dataset) that people may be interested in. Facet Extraction has numerous applications, including document summarization, literature search, patent search and business intelligence. The major challenge in performing Facet Extraction arises from multiple sources: concept extraction, concept to facet matching, and facet disambiguation. To tackle these challenges, we develop FacetGist, a framework for facet extraction. Facet Extraction involves constructing a graph-based heterogeneous network to capture information available across multiple local sentence-level features, as well as global context features. We then formulate a joint optimization problem, and propose an efficient algorithm for graph-based label propagation to estimate the facet of each concept mention. Experimental results on technical corpora from two domains demonstrate that Facet Extraction can lead to an improvement of over 25% in both precision and recall over competing schemes.

Direct Posterior Bipolar Cervical Facet Radiofrequency Rhizotomy: A Simpler and Safer Approach to Denervate the Facet Capsule.

Science.gov (United States)

Palea, Ovidiu; Andar, Haroon M; Lugo, Ramon; Granville, Michelle; Jacobson, Robert E

2018-03-14

Radiofrequency cervical rhizotomy has been shown to be effective for the relief of chronic neck pain, whether it be due to soft tissue injury, cervical spondylosis, or post-cervical spine surgery. The target and technique have traditionally been taught using an oblique approach to the anterior lateral capsule of the cervical facet joint. The goal is to position the electrode at the proximal location of the recurrent branch after it leaves the exiting nerve root and loops back to the cervical facet joint. The standard oblique approach to the recurrent nerve requires the testing of both motor and sensory components to verify the correct position and ensure safety so as to not damage the slightly more anterior nerve root. Bilateral lesions require the repositioning of the patient's neck. Poorly positioned electrodes can also pass anteriorly and contact the nerve root or vertebral artery. The direct posterior approach presented allows electrode positioning over a broader expanse of the facet joint without risk to the nerve root or vertebral artery. Over a four-year period, direct posterior radiofrequency ablation was performed under fluoroscopic guidance at multiple levels without neuro-stimulation testing with zero procedural neurologic events even as high as the C2 spinal segment. The direct posterior approach allows either unipolar or bipolar lesioning at multiple levels. Making a radiofrequency lesion along the larger posterior area of the facet capsule is as effective as the traditional target point closer to the nerve root but technically easier, allowing bilateral access and safety. The article will review the anatomy and innervation of the cervical facet joint and capsule, showing the diffuse nerve supply extending into the capsule of the facet joint that is more extensive than the recurrent medial sensory branches that have been the focus of radiofrequency lesioning.

A critical evaluation of subtalar joint arthrosis associated with middle facet talocalcaneal coalition in 21 surgically managed patients: a retrospective computed tomography review. Investigations involving middle facet coalitions-part III.

Science.gov (United States)

Kernbach, Klaus J; Barkan, Howard; Blitz, Neal M

2010-01-01

Symptomatic middle facet talocalcaneal coalition is frequently associated with rearfoot arthrosis that is often managed surgically with rearfoot fusion. However, no objective method for classifying the extent of subtalar joint arthrosis exists. No study has clearly identified the extent of posterior facet arthrosis present in a large cohort treated surgically for talocalcaneal coalition through preoperative computerized axial tomography. The authors conducted a retrospective review of 21 patients (35 feet) with coalition who were surgically treated over a 12-year period for coalition on at least 1 foot. Using a predefined original staging system, the extent of the arthrosis was categorized into normal or mild (Stage I), moderate (Stage II), and severe (Stage III) arthrosis. The association of stage and age is statistically significant. All of the feet with Stage III arthrosis had fibrous coalitions. No foot with osseous coalition had Stage III arthrosis. The distribution of arthrosis staging differs between fibrous and osseous coalitions. Only fibrous coalitions had the most advanced arthrosis (Stage III), whereas osseous coalitions did not. This suggests that osseous coalitions may have a protective effect in the prevention of severe degeneration of the subtalar joint. Concomitant subtalar joint arthrosis severity progresses with age; surgeons may want to consider earlier surgical intervention to prevent arthrosis progression in patients with symptomatic middle facet talocalcaneal coalition.

Cervical Facet Joint Infection and Associated Epidural Abscess with Streptococcus intermedius from a Dental Infection Origin A Case Report and Review.

Science.gov (United States)

Kaye, Ian David; Protopsaltis, Themistocles S

2016-09-01

Pyogenic cervical facet joint infections are rare and such infections from a dental origin are even less common. Of these few cases, none have described infection with Streptococcus intermedius as the pathogen. A 65-year-old orthopaedic surgeon complained of fevers, right-sided radiating neck pain, stiffness, swelling, erythema, and right upper extremity weakness one month after he had broken a crown over his right mandibular premolar, a continued source of pain. Imaging of the cervical spine showed a right C4-C5 facet inflammatory arthropathy and a small epidural abscess that was cultured and initially treated with intravenous antibiotics. The oral maxillofacial surgery team performed an extraction of the infected, symptomatic tooth. For continued right upper extremity weakness, the patient underwent C4-C5 laminoforaminotomy and irrigation and debridement of the right C4-C5 facet joint. After 6 weeks of intravenous antibiotics, the patient's infectious and inflammatory markers had normalized. By 4 months, he had regained full strength at his upper extremity and a painless and full range of motion of his cervical spine.Pyogenic cervical facet joint infection is very rare and potentially dangerous. A high clinical suspicion and appropriate imaging, including magnetic resonance imaging, are important for correct diagnosis. Prompt medical and surgical treatment may avert complications, and although the patient presented made a complete recovery, patients may be left with neurological compromise.

Pyomyositis of the iliacus muscle and pyogenic sacroiliitis after sacroiliac joint block -A case report-

OpenAIRE

Lee, Mi Hyeon; Byon, Hyo-Jin; Jung, Hyun Jun; Cha, Young-Deog; Lee, Doo Ik

2013-01-01

Sacroiliac joint block can be performed for the diagnosis and treatment of sacroiliac joint dysfunction. Although sacroiliac joint block is a common procedure, complications have not been reported in detail. We report a case of iliacus pyomyositis and sacroiliac joint infection following a sacroiliac joint block. A 70-year-old female patient received sacroiliac joint blocks to relieve pelvic pain. The patient was admitted to the emergency room two days after the final sacroiliac joint block (...

Septic arthritis of a lumbar facet joint: Detection with bone SPECT imaging

International Nuclear Information System (INIS)

Swayne, L.C.; Dorsky, S.; Caruana, V.; Kaplan, I.L.

1989-01-01

We present a rare case of septic arthritis of a lumbar facet joint with an associated epidural abscess resulting from Staphylococcus aureus. The infection was initially detected with planar bone scintigraphy and precisely localized with single photon emission computed tomography bone scintigraphy, despite an initially negative radiologic evaluation that included radiographs of the lumbar spine, lumbar myelography, and a postmyelography x-ray computed tomography scan. In the appropriate clinical setting, a bone scan demonstrating unilateral increased activity within the spine should raise the suspicion of inflammatory involvement of the posterior elements

Pseudomeningocele in communication with the facet joint: demonstration by computerized tomography-arthrography

International Nuclear Information System (INIS)

Ganiyusufoglu, Kursat; Ozturk, Cagatay; Sirvanci, Mustafa; Aksu, Neslihan; Hamzaoglu, Azmi

2008-01-01

Pseudomeningocele is an uncommon but well-known complication of lumbar spine operations. Although it is mostly asymptomatic and managed conservatively in most cases, it is claimed as a causative factor of failed back surgery syndrome and requires surgery in some cases. Usually, its diagnosis is confidently done with imaging modalities such as magnetic resonance imaging, computed tomography and myelography. In this report, we describe a case of pseudomeningocele that communicated with a facet joint. The diagnostic approach for this unusual lesion and its probable causes are discussed. (orig.)

Pseudomeningocele in communication with the facet joint: demonstration by computerized tomography-arthrography

Energy Technology Data Exchange (ETDEWEB)

Ganiyusufoglu, Kursat; Ozturk, Cagatay; Sirvanci, Mustafa; Aksu, Neslihan; Hamzaoglu, Azmi [Florence Nightingale Hospital, Istanbul Bilim University, Istanbul Spine Center, Istanbul (Turkey)

2008-08-15

Pseudomeningocele is an uncommon but well-known complication of lumbar spine operations. Although it is mostly asymptomatic and managed conservatively in most cases, it is claimed as a causative factor of failed back surgery syndrome and requires surgery in some cases. Usually, its diagnosis is confidently done with imaging modalities such as magnetic resonance imaging, computed tomography and myelography. In this report, we describe a case of pseudomeningocele that communicated with a facet joint. The diagnostic approach for this unusual lesion and its probable causes are discussed. (orig.)

Bending stresses in Facetted Glass Shells

DEFF Research Database (Denmark)

Bagger, Anne; Jönsson, Jeppe; Almegaard, Henrik

2008-01-01

A shell structure of glass combines a highly effective structural principle with a material of optimal permeability to light. A facetted shell structure has a piecewise plane geometry, and together the facets form an approximation to a curved surface. A distributed load on a plane-based facetted...... structure will locally cause bending moments in the loaded facets. The bending stresses are dependent on the stiffness of the joints. Approximate solutions are developed to estimate the magnitude of the bending stresses. A FE-model of a facetted glass shell structure is used to validate the expressions...

Pathways toward unidirectional alignment in block copolymer thin films on faceted surfaces

Science.gov (United States)

Gunkel, Ilja; Gu, Xiaodan; Sarje, Abhinav; Hexemer, Alexander; Russell, Thomas

2015-03-01

Solvent vapor annealing (SVA) has been shown recently to be an effective means to produce long-range lateral order in block copolymer (BCP) thin films in relatively short times. Furthermore, using substrates with faceted surfaces allows for generating unidirectionally aligned BCP microdomains on the size scale of an entire wafer. While in recent years SVA has been largely demystified, the detailed pathways toward obtaining unidirectional alignment still remain unclear. Grazing-incidence X-ray scattering (GISAXS) is a very powerful tool for characterizing the structure and morphology of BCPs in thin films, and is particularly useful for studying structural changes in BCP thin films during SVA. We here present in situ GISAXS experiments on cylinder-forming PS-b-P2VP BCP thin films on faceted Sapphire substrates during annealing in THF. We show that the degree of alignment of cylindrical microdomains is greatly enhanced at solvent concentrations close to the order-disorder transition of the copolymer. Furthermore, we observed that inducing disorder by further increasing the solvent concentration and subsequent quenching to the ordered (not yet glassy) state induced the highest degree of alignment with nearly unidirectional alignment of the microdomains in less than 30 min.

Biomechanical analysis of press-extension technique on degenerative lumbar with disc herniation and staggered facet joint

Directory of Open Access Journals (Sweden)

Hong-gen Du

2016-05-01

Full Text Available This study investigates the effect of a new Chinese massage technique named “press-extension” on degenerative lumbar with disc herniation and facet joint dislocation, and provides a biomechanical explanation of this massage technique. Self-developed biomechanical software was used to establish a normal L1–S1 lumbar 3D FE model, which integrated the spine CT and MRI data-based anatomical structure. Then graphic technique is utilized to build a degenerative lumbar FE model with disc herniation and facet joint dislocation. According to the actual press-extension experiments, mechanic parameters are collected to set boundary condition for FE analysis. The result demonstrated that press-extension techniques bring the annuli fibrosi obvious induction effect, making the central nucleus pulposus forward close, increasing the pressure in front part. Study concludes that finite element modelling for lumbar spine is suitable for the analysis of press-extension technique impact on lumbar intervertebral disc biomechanics, to provide the basis for the disease mechanism of intervertebral disc herniation using press-extension technique.

Cost Utility Analysis of Cervical Therapeutic Medial Branch Blocks in Managing Chronic Neck Pain.

Science.gov (United States)

Manchikanti, Laxmaiah; Pampati, Vidyasagar; Kaye, Alan D; Hirsch, Joshua A

2017-01-01

Background: Controlled diagnostic studies have established the prevalence of cervical facet joint pain to range from 36% to 67% based on the criterion standard of ≥ 80% pain relief. Treatment of cervical facet joint pain has been described with Level II evidence of effectiveness for therapeutic facet joint nerve blocks and radiofrequency neurotomy and with no significant evidence for intraarticular injections. However, there have not been any cost effectiveness or cost utility analysis studies performed in managing chronic neck pain with or without headaches with cervical facet joint interventions. Study Design: Cost utility analysis based on the results of a double-blind, randomized, controlled trial of cervical therapeutic medial branch blocks in managing chronic neck pain. Objectives: To assess cost utility of therapeutic cervical medial branch blocks in managing chronic neck pain. Methods: A randomized trial was conducted in a specialty referral private practice interventional pain management center in the United States. This trial assessed the clinical effectiveness of therapeutic cervical medial branch blocks with or without steroids for an established diagnosis of cervical facet joint pain by means of controlled diagnostic blocks. Cost utility analysis was performed with direct payment data for the procedures for a total of 120 patients over a period of 2 years from this trial based on reimbursement rates of 2016. The payment data provided direct procedural costs without inclusion of drug treatments. An additional 40% was added to procedural costs with multiplication of a factor of 1.67 to provide estimated total costs including direct and indirect costs, based on highly regarded surgical literature. Outcome measures included significant improvement defined as at least a 50% improvement with reduction in pain and disability status with a combined 50% or more reduction in pain in Neck Disability Index (NDI) scores. Results: The results showed direct

Lumbar facet joint septic arthritis presenting atypically as acute abdomen – A case report and review of the literature

Directory of Open Access Journals (Sweden)

Aysha Rajeev

2016-01-01

Conclusion: The atypical presentation of facet joint septic arthritis is one of the reasons why early diagnosis is elusive. Definitive diagnoses with MRI and bacterial culture as well as prolonged antibiotic therapy are recommended in this condition.

MRI-guided focused ultrasound (MRgFUS) to treat facet joint osteoarthritis low back pain - case series of an innovative new technique

Energy Technology Data Exchange (ETDEWEB)

Weeks, Evan M.; Platt, Michael W. [St Mary' s Hospital, Imperial College Healthcare NHS Trust, Department of Anaesthesia and Pain Medicine, London (United Kingdom); Gedroyc, Wladyslaw [St Mary' s Hospital, Imperial College Healthcare NHS Trust, Department of Radiology, London (United Kingdom)

2012-12-15

To evaluate the safety and efficacy of magnetic resonance-guided focused ultrasound (MRgFUS) to treat facet joint osteoarthritis pain. Patients with a positive response to facet joint interventions were recruited from Pain and Spinal Clinics. Treatments were performed at the levels of pain according to symptomatology, previous invasive treatment and MRI grading of facet joint osteoarthritis. Both safety and efficacy data were collected. Pain palliation was evaluated using a validated pain numerical rating scale (NRS), Oswestry disability questionnaire (ODQ), Brief Pain Inventory (BPI) and the EuroQol (EQ-5D) health state score Eighteen patients were treated. There were no major adverse events. At 6/12 we found a reduction in both the NRS (average/worst) pain scores (60.2 %/51.2 %). This was associated with 45.9 % improvement in the ODQ score and 61.9 % reduction in the BPI interference score. We observed an improvement in the EuroQol (EQ-5D) health state score based on UK coefficients of +0.379 (0.317 to 0.696). Our phase I observational pilot study has evaluated an innovative new technique that is both non-invasive and radiation free. It is the first description of this procedure in the literature. In all patients the technique was safe, free of complications, effective and well tolerated. (orig.)

MRI-guided focused ultrasound (MRgFUS) to treat facet joint osteoarthritis low back pain - case series of an innovative new technique

International Nuclear Information System (INIS)

Weeks, Evan M.; Platt, Michael W.; Gedroyc, Wladyslaw

2012-01-01

To evaluate the safety and efficacy of magnetic resonance-guided focused ultrasound (MRgFUS) to treat facet joint osteoarthritis pain. Patients with a positive response to facet joint interventions were recruited from Pain and Spinal Clinics. Treatments were performed at the levels of pain according to symptomatology, previous invasive treatment and MRI grading of facet joint osteoarthritis. Both safety and efficacy data were collected. Pain palliation was evaluated using a validated pain numerical rating scale (NRS), Oswestry disability questionnaire (ODQ), Brief Pain Inventory (BPI) and the EuroQol (EQ-5D) health state score Eighteen patients were treated. There were no major adverse events. At 6/12 we found a reduction in both the NRS (average/worst) pain scores (60.2 %/51.2 %). This was associated with 45.9 % improvement in the ODQ score and 61.9 % reduction in the BPI interference score. We observed an improvement in the EuroQol (EQ-5D) health state score based on UK coefficients of +0.379 (0.317 to 0.696). Our phase I observational pilot study has evaluated an innovative new technique that is both non-invasive and radiation free. It is the first description of this procedure in the literature. In all patients the technique was safe, free of complications, effective and well tolerated. (orig.)

Unusual case of paediatric septic arthritis of the lumbar facet joints due to Kingella kingae.

Science.gov (United States)

Le Hanneur, M; Vidal, C; Mallet, C; Mazda, K; Ilharreborde, B

2016-11-01

A 32-month-old boy presented with febrile limping that had developed over 6days, associated with right lumbosacral inflammatory swelling. Magnetic resonance imaging (MRI) showed joint effusion of the right L5-S1 zygapophyseal joint, complicated by destructive osteomyelitis of the L5 articular process and paraspinal abscess. Surgery was decided to evacuate the fluid accumulation and rule out differential diagnoses. The diagnosis of septic arthritis of the facet joint was confirmed intraoperatively; real-time quantitative PCR analysis identified Kingella kingae. This is the first substantiated paediatric case of zygapophyseal joint septic arthritis due to K. kingae. K. kingae is the most common pathogen responsible for invasive osteoarticular infection in children under 4years of age. Since empiric antibiotics are effective in early stages, physicians should consider the possibility of spinal infections due to K. kingae when a limping child under 4years of age presents with a fever. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

Isolated septic facet joint arthritis as a rare cause of acute and chronic low back pain – a case report and literature review

International Nuclear Information System (INIS)

Klekot, Dominika; Zimny, Anna; Czapiga, Bogdan; Sąsiadek, Marek

2012-01-01

The most common cause of low back pain is degenerative disease of the intervertebral disc and other structures of the lumbar spine. However, in some cases other less frequent causes of such pain can be seen, for example septic facet joint arthritis. Until now, only 40 cases of such inflammatory changes within the spine have been reported in the literature. The disease is probably underestimated due to improper diagnostic pathway. The authors describe a case of a 53-year-old woman who was repeatedly hospitalized during a five-month period because of an acute, severe low back pain, with sphincter dysfunction, partially resembling sciatic symptoms. Physical examinations revealed also focal tenderness in the area of the lumbar spine. Inflammatory markers (ESR – erythrocyte sedimentation rate, CRP – C-reactive protein) were elevated. Conservative analgetic treatment brought only partial and temporary relief of the pain and symptoms. The final accurate diagnosis of isolated septic facet joint arthritis at the level of L5/S1 was established after several months from the onset of the first symptoms, after performing various imaging examinations, including bone scintigraphy as well as CT and MRI of the lumbosacral spine. The patient fully recovered after antibiotic therapy and surgery, which was proven in several follow-up examinations showing no relevant pathology of the lumbar spine. The authors broadly describe the etiology and clinical symptoms of the septic facet joint arthritis as well as the significant role of imaging methods, especially MRI, in diagnostic process. The authors also discuss currently available treatment options, both conservative and surgical. The diagnostic procedure of septic facet joint arthritis requires several steps to be taken. Establishing a correct diagnosis may be difficult, that is why it is important to remember about rare causes of low back pain and to perform detailed physical examination, laboratory tests and choose appropriate

Short-term outcome of fluoroscopic-guided steroid injection therapy of lumber facet cyst-induced radicular pain

Energy Technology Data Exchange (ETDEWEB)

Kwon, Mi Ri; Kwon, Jong Won; Lee, Jong Seo; Kim, Eu Sang [Samsung Medical Center, Sungkyunkwan University School of Medicine, Seoul (Korea, Republic of)

2015-04-15

To determine the short-term effect of fluoroscopic-guided steroid injection therapy of lumbar facet cyst-induced radicular pain. Seventeen patients with radiculopathy due to lumbar synovial cysts, who were treated with fluoroscopically guided injection, were retrospectively evaluated. All plain radiographic images and MR images before the therapy were reviewed. Five patients underwent only the facet joint injection, whereas twelve patients underwent the facet joint injection with perineural injection therapy. The clinical course of pain was evaluated on the first follow-up after therapy. Effective pain relief was achieved in 11 (64.7%) of the 17 patients. Among 12 patients who underwent facet joint injection with perineural injection, 9 patients (75%) had an effective pain relief. Of 5 patients, 2 (40%) patients only took the facet joint injection and had an effective pain relief. Fluoroscopic-guided steroid injection therapy shows a good short-term effect in patients with symptomatic lumbar facet joint synovial cysts.

Pyomyositis of the iliacus muscle and pyogenic sacroiliitis after sacroiliac joint block -A case report-.

Science.gov (United States)

Lee, Mi Hyeon; Byon, Hyo-Jin; Jung, Hyun Jun; Cha, Young-Deog; Lee, Doo Ik

2013-05-01

Sacroiliac joint block can be performed for the diagnosis and treatment of sacroiliac joint dysfunction. Although sacroiliac joint block is a common procedure, complications have not been reported in detail. We report a case of iliacus pyomyositis and sacroiliac joint infection following a sacroiliac joint block. A 70-year-old female patient received sacroiliac joint blocks to relieve pelvic pain. The patient was admitted to the emergency room two days after the final sacroiliac joint block (SIJB) with the chief complaints of left pelvic pain corresponding to a visual analogue scale (VAS) score of 9 and fever. A pelvic MRI indicated a diagnosis of myositis. After 1 month of continuous antibiotic therapy, the patient's erythrocyte sedimentation rate (ESR) and C-reactive protein (CRP) level remained elevated. A (67)Ga SPECT/CT was done. Abnormal uptake was seen at the left sacroiliac joint (SIJ), and septic sacroiliitis was suspected. The CRP normalized to 0.29 mg/dl and the ESR decreased to 60 mm/hr, and the patient had no fever after 57 days of antibiotic therapy. She was directed for follow up at an outpatient clinic.

Lumbar Facet Joint Arthritis Is Associated with More Coronal Orientation of the Facet Joints at the Upper Lumbar Spine

International Nuclear Information System (INIS)

Jentzsch, Th.; Geiger, J.; Zimmermann, S.M.; Slankamenac, K.; Werner, C.M.L.; Nguyen-Kim, Th.D.L.

2013-01-01

We retrospectively analyzed CT scans of 620 individuals, who presented to our traumatology department between 2008 and 2010. Facet joint (FJ) arthritis was present in 308 (49.7%) individuals with a mean grade of 1. It was seen in 27% of individuals ≤40 years and in 75% of individuals ≥41 years ( Ρ <0.0001) as well as in 52% of females and 49% of males ( Ρ=0.61). Mean FJ orientation was 30.4° at L2/3, 38.7° at L3/4, 47° at L4/5, and 47.3° at L5/S1. FJ arthritis was significantly associated with more coronal (increased degree) FJ orientation at L2/3 (Ρ=0.03) with a cutoff point at ≥32°. FJs were more coronally oriented (48.8°) in individuals ≤40 years and more sagittally oriented (45.6°) in individuals ≥41 years at L5/S1 (Ρ=0.01). Mean FJ asymmetry was 4.89° at L2/3, 6.01° at L3/4, 6.67° at L4/5, and 7.27° at L5/S1, without a significant difference for FJ arthritis. FJ arthritis is common, increases with age, and affects both genders equally. More coronally oriented FJs (≥32°) in the upper lumbar spine may be an individual risk factor for development of FJ arthritis.

The lumbar facet arthrosis syndrome. Clinical presentation and articular surface changes.

Science.gov (United States)

Eisenstein, S M; Parry, C R

1987-01-01

We describe a lumbar facet syndrome in which disabling symptoms are associated with normal or near-normal plain radiographs. Local spinal fusion relieved symptoms in 12 patients; the excised facet joint surfaces showed some of the histological changes seen in chondromalacia patellae and in osteoarthritis of other large joints. The most frequent change was focal full-thickness cartilage necrosis or loss of cartilage with exposure of subchondral bone, but osteophyte formation was remarkably absent in all specimens. We suggest that there are both clinical and histological similarities between the facet arthrosis syndrome and chondromalacia patellae. Facet arthrosis may be a relatively important cause of intractable back pain in young and middle-aged adults.

THERAPEUTIC EFFECTIVENESS OF THORACIC FACET JOINT INTERVENTIONS IN CHRONIC THORACIC PAIN%X光引导胸椎小关节注射治疗胸背痛的疗效观察

Institute of Scientific and Technical Information of China (English)

李晓宏; 李世杰; 黄翔; 富沛勇; 杨承祥

2013-01-01

目的:评价小关节注射治疗胸背部疼痛的临床疗效及安全性.方法:60例经保守治疗无效的慢性胸背痛患者,随机分为超激光治疗组(S组,n=30)和介入治疗组(Ⅰ组,n=30).S组患者取俯卧位,超激光照射病变关节部位,每天1次,每次15 rain,共14次；Ⅰ组患者取俯卧位,在X光引导下确定病变小关节平面,穿刺针经皮正确无误到达胸椎后关节突关节间隙,到位后注射消炎镇痛液.对治疗后第1周、2周、1个月、3个月的VAS进行评分、生活质量改善情况及安全性进行评估.结果:与S组比较,Ⅰ组治疗患者术后3个月的VAS评分较治疗前有显著性降低(P＜0.05),且未发现有严重并发症.结论:小关节注射治疗胸背痛是一项操作简便、安全,疗效确切、可靠的微创介入治疗方法.%Objective:To determine the clinical effectiveness of zygapophysial joint injections with fluoroscopy in managing chronic mid back or upper back pain of facet joint origin.Methods:A total of 60 patients were randomized divided into two groups,with 30 patients in each of the super laser and facet joint interventions groups.All of the patients met the diagnostic criteria of thoracic facet joint pain by means of the inclusion criteria.Group S patients received thoracic facet joint with super laser,whereas Group Ⅰ patients received thoracic facet joint intervention with bupivacaine and non-particulate betamethasone.The clinical efficacy were assessed by patients with visual analogue scale(VAS).All outcomes were assessed at baseline,1 week,2 weeks,1 month,and 3 months after treatment.Results:In Group S,compared with baseline,patients showed significant pain relief and functional improvement at 1 week (P ＜ 0.05) But there were no significant pain relief after 2 weeks.In Group Ⅰ,patients showed significant pain relief and functional improvement after facet joint injection,a significant change 3 months after treatment from baseline (P ＜ 0

Empirical Assessment of the Mean Block Volume of Rock Masses Intersected by Four Joint Sets

Science.gov (United States)

Morelli, Gian Luca

2016-05-01

The estimation of a representative value for the rock block volume ( V b) is of huge interest in rock engineering in regards to rock mass characterization purposes. However, while mathematical relationships to precisely estimate this parameter from the spacing of joints can be found in literature for rock masses intersected by three dominant joint sets, corresponding relationships do not actually exist when more than three sets occur. In these cases, a consistent assessment of V b can only be achieved by directly measuring the dimensions of several representative natural rock blocks in the field or by means of more sophisticated 3D numerical modeling approaches. However, Palmström's empirical relationship based on the volumetric joint count J v and on a block shape factor β is commonly used in the practice, although strictly valid only for rock masses intersected by three joint sets. Starting from these considerations, the present paper is primarily intended to investigate the reliability of a set of empirical relationships linking the block volume with the indexes most commonly used to characterize the degree of jointing in a rock mass (i.e. the J v and the mean value of the joint set spacings) specifically applicable to rock masses intersected by four sets of persistent discontinuities. Based on the analysis of artificial 3D block assemblies generated using the software AutoCAD, the most accurate best-fit regression has been found between the mean block volume (V_{{{{b}}_{{m}} }}) of tested rock mass samples and the geometric mean value of the spacings of the joint sets delimiting blocks; thus, indicating this mean value as a promising parameter for the preliminary characterization of the block size. Tests on field outcrops have demonstrated that the proposed empirical methodology has the potential of predicting the mean block volume of multiple-set jointed rock masses with an acceptable accuracy for common uses in most practical rock engineering applications.

Gradient-echo imaging of intervertebral disk degeneration and facet joint disease

International Nuclear Information System (INIS)

Berns, D.H.; Kormos, D.; Modic, M.T.; Carter, J.; Masaryk, T.J.; Ross, J.S.

1988-01-01

The purpose of this study was to evaluate the accuracy of gradient-echo, partial-flip angle images in the evaluation of components of degenerative spine disease. First, cadaveric spines were studied with plain radiographs, high-resolution CT, T1-weighted spin-echo (SE) MR images (repetition time msec/echo time msec=500/17). T2-weighted SE images (2,000/30-90), and fast low-angle shot (FLASH) images (200/10.50 0 ) before and after intradiskal injection of air (0.1-1cc). Second, lumbar spine MR images were retrospectively evaluated to compare gradient-echo and SE sequences. Results indicate that the signal intensity changes of the intervertebral disk related to degeneration were best appreciated on T2-weighted SE studies in both groups. Vacuum phenomenon and calcification were most accurately assessed with FLASH imaging (based on susceptibility changes) and CT images. SE images appeared more sensitive to adjacent marrow change. In the facet joints, CT was more accurate for changes in the subarticular bone, but FLASH images were more sensitive to change in the articular cartilage

Suprascapular block in the therapy of chronic pain in the shoulder and the shoulder joint: Suprascapular block

Directory of Open Access Journals (Sweden)

Palibrk Ivan

2016-01-01

Full Text Available Introduction: Chronic pain in the shoulder and the shoulder joint is a very common pathology in modern human population. The etiology of chronic pain is often unknown, although the trauma, degenerative diseases, inflammation, tumors and neurological disease appear as common etiologic factors. Patients with this pain had a significantly reduced quality of life.1,2 Method: During the two years, twelve patients diagnosed painful shoulder syndrome. Eleven of the twelve patients involved in the study had started physical therapy. Under the physical treatment pain intensity decreased, but not completely. Hand had reduced mobility. We applied a suprascapular block. We used 1 ml (7 mg betamethasone. Results: Suprascapular block was applied to the eleven patients in physical therapy. After three days of application, the pain was significantly reduced, by 50% in seven patients. Mobility of the hand was greatly improved. In three of the remaining four patients the block was repeated after one month. The pain was significantly smaller after that. Physical therapy is done all the time. Conclusion: The treatment of chronic pain in the shoulder and the shoulder joint is multidisciplinary. In some cases, the use of corticosteroids suprascapular block is very useful.

Investigation of stresses in facetted glass shell structures

DEFF Research Database (Denmark)

Bagger, Anne; Jönsson, Jeppe; Wester, Ture

2007-01-01

by in-plane forces in the facets and the transfer of distributed in-plane forces across the joints. It is described how these facets work structurally, specifically how bending moments develop and cause possible stress concentrations in the corners, which are subjected to uplift. Apart from local...... bending moments from distributed load, other types of bending moments are likely to occur, especially if the shell has areas of low stiffness, for example along a free edge. A facetted shell structure has been modelled in a finite element program, and the resulting stresses are presented and discussed....

Pain from intra-articular NGF or joint injury in the rat requires contributions from peptidergic joint afferents.

Science.gov (United States)

Kras, Jeffrey V; Weisshaar, Christine L; Pall, Parul S; Winkelstein, Beth A

2015-09-14

Non-physiological stretch of the cervical facet joint's capsular ligament induces persistent behavioral hypersensitivity and spinal neuronal hyperexcitability via an intra-articular NGF-dependent mechanism. Although that ligament is innervated by nociceptors, it is unknown if a subpopulation is exclusively responsible for the behavioral and spinal neuronal responses to intra-articular NGF and/or facet joint injury. This study ablated joint afferents using the neurotoxin saporin targeted to neurons involved in either peptidergic ([Sar(9),Met (O2)(11)]-substance P-saporin (SSP-Sap)) or non-peptidergic (isolectin B4-saporin (IB4-Sap)) signaling to investigate the contributions of those neuronal populations to facet-mediated pain. SSP-Sap, but not IB4-Sap, injected into the bilateral C6/C7 facet joints 14 days prior to an intra- articular NGF injection prevents NGF-induced mechanical and thermal hypersensitivity in the forepaws. Similarly, only SSP- Sap prevents the increase in mechanical forepaw stimulation- induced firing of spinal neurons after intra-articular NGF. In addition, intra-articular SSP-Sap prevents both behavioral hypersensitivity and upregulation of NGF in the dorsal root ganglion after a facet joint distraction that normally induces pain. These findings collectively suggest that disruption of peptidergic signaling within the joint may be a potential treatment for facet pain, as well as other painful joint conditions associated with elevated NGF, such as osteoarthritis. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

[Relevance of nerve blocks in treating and diagnosing low back pain--is the quality decisive?].

Science.gov (United States)

Hildebrandt, J

2001-12-01

Diagnostic nerve blocks: The popularity of neural blockade as a diagnostic tool in painful conditions, especially in the spine, is due to features like the unspecific character of spinal pain, the irrelevance of radiological findings and the purely subjective character of pain. It is said that apart from specific causes of pain and clear radicular involvement with obvious neurological deficits and corresponding findings of a prolapsed disc in MRI or CT pictures, a diagnosis of the anatomical cause of the pain can only be established if invasive tests are used [5]. These include zygapophyseal joint blocks, sacroiliacal joint blocks, disc stimulation and nerve root blocks. Under controlled conditions, it has been shown that among patients with chronic nonradicular low back pain, some 10-15% have zygapophyseal joint pain [58], some 15-20% have sacroiliacal joint pain [36, 59] and 40% have pain from internal disc disruption [60]. The diagnostic use of neural blockade rests on three premises. First, pathology causing pain is located in an exact peripheral location, and impulses from this site travel via a unique and consistent neural root. Second, injection of local aneasthetic totally abolishes sensory function of intended nerves and does not affect other nerves. Third, relief of pain after local anaesthetic block is attributable solely to block of the target afferent neural pathway. The validity of these assumptions is limited by complexities of anatomy, physiology, and psychology of pain perception and the effect of local anaesthetics on impulse conduction [28]. Facet joints: The prevalence of zygapophyseal joint pain among patients with low back pain seems to be between 15% and 40% [62], but apparently only 7% of patients have pure facet pain [8, 29]. Facet blockade is achieved either by injection of local anaesthetic into the joint space or around the medial branches of the posterior medial rami of the spinal nerves that innervate the joint. There are several

Intraarticular Facet Injections for Low Back Pain: Design Considerations, Consensus Methodology to Develop the Protocol for a Randomized Controlled Trial.

Science.gov (United States)

Mars, Tom; Ellard, David R; Antrobus, James H L; Cairns, Melinda; Underwood, Martin; Haywood, Kirstie; Keohane, Susie; Sandhu, Harbinder; Griffiths, Frances

2015-01-01

Since the publication of guidelines by the UK National Institute for Health and Care Excellence (NICE) and the American Pain Society guidelines for low back pain in 2009 there have been deep divisions in the pain treatment community about the use of therapeutic intraarticular facet joint injections. While evidence for the effectiveness or not of intraarticular facet joint injections remains sparse, uncertainty will remain. The Warwick feasibility study, along with a concurrent study with a different design led by another group, aims to provide a stable platform from which the effectiveness and cost effectiveness of intraarticular facet joint injections added to normal care could be evaluated in randomized controlled trials (RCTs). To reach consensus on key design considerations for the Warwick facet feasibility study from which the study protocol and working manuals will be developed. A consensus conference involving expert professionals and lay members. Preliminary work identified 5 key design considerations for deliberation at our consensus conference. Three concerned patient assessment and treatment: diagnosis of possible facet joint pain, interaarticular facet joint injection technique, and best usual care. Two concerned trial analysis: a priori sub-groups and minimally important difference and are reported elsewhere. We did systematic evidence reviews of the design considerations and summarized the evidence. Our design questions and evidence summaries were distributed to all delegates. This formed the basis for discussions on the day. Clinical experts in all aspects of facet joint injection from across the UK along with lay people were invited via relevant organizations. Nominal group technique was used in 15 facilitated initial small group discussions. Further discussion and ranking was undertaken in plenary. All small group and plenary results were recorded and checked and verified post conference. Where necessary participants were contacted via email to

Characteristic MRI and MR Myelography Findings for the Facet Cyst Hematoma at T12-L1 Spine: A Case Report

International Nuclear Information System (INIS)

Chung, Seung Eun; Lee, Sang Ho; Kim, Tae Hong; Choi, Gun; Paeng, Sung Suk

2011-01-01

A facet cyst is a very rare condition in the thoracolumbar spine and more so, hemorrhage into a cyst is extremely rare. We present a case of a facet cyst hematoma in the T12-L1 spine. A 69-year-old woman complained of chronic back pain with right lower extremity pain, and weakness for 3 years. MRI and MR myelography showed an extradural mass at the T12-L1 level with heterogeneous signal intensity on both T1-and T2-weighted images, which was continuous to the right T12-L1 facet joint. The neighboring facet joint showed severe degeneration on the CT scan. The mass a was simple hematoma covered with a thin fibrous membrane and connected with facet joint macroscopically and microscopically. The pathogenesis of the facet cyst hematoma is not clear but it can compress nerve roots or dura mater and cause radiculopathy or cauda equina syndrome. Surgical removal should be recommended for symptomatic relief.

Characteristic MRI and MR Myelography Findings for the Facet Cyst Hematoma at T12-L1 Spine: A Case Report

Energy Technology Data Exchange (ETDEWEB)

Chung, Seung Eun [Dept of Diagnostic Radiology, Wooridul Spine Hospital, Seoul (Korea, Republic of); Lee, Sang Ho [Dept. of Neurosurgery, Wooridul Spine Hospital, Seoul (Korea, Republic of); Kim, Tae Hong [Dept. of Neurosurgery, Sanggye Paik Hospital, Inje University College of Medicine, Seoul (Korea, Republic of); Choi, Gun [Dept. of Neurosurgery, Seoul Wooridul Hospital, Seoul (Korea, Republic of); Paeng, Sung Suk [Dept of Radiology, Wooridul Spine Hospital, Seoul (Korea, Republic of)

2011-05-15

A facet cyst is a very rare condition in the thoracolumbar spine and more so, hemorrhage into a cyst is extremely rare. We present a case of a facet cyst hematoma in the T12-L1 spine. A 69-year-old woman complained of chronic back pain with right lower extremity pain, and weakness for 3 years. MRI and MR myelography showed an extradural mass at the T12-L1 level with heterogeneous signal intensity on both T1-and T2-weighted images, which was continuous to the right T12-L1 facet joint. The neighboring facet joint showed severe degeneration on the CT scan. The mass a was simple hematoma covered with a thin fibrous membrane and connected with facet joint macroscopically and microscopically. The pathogenesis of the facet cyst hematoma is not clear but it can compress nerve roots or dura mater and cause radiculopathy or cauda equina syndrome. Surgical removal should be recommended for symptomatic relief.

Single-step brazing process for mono-block joints and mechanical testing

Energy Technology Data Exchange (ETDEWEB)

Casalegno, V.; Ferraris, M.; Salvo, M.; Rizzo, S. [Politecnico di Torino, Materials Science and Chemical Engineering Dept., Torino (Italy); Merola, M. [ITER International Team, llER Joint Work Site, Cadarache, 13 - St Paul Lez Durance (France)

2007-07-01

Full text of publication follows: Plasma facing components act as actively cooled thermal shields to sustain thermal and particle loads during normal and transient operations in ITER (International Thermonuclear Experimental Reactor). The plasma-facing layer is referred to as 'armour', which is made of either carbon fibre reinforced carbon composite (CFC) or tungsten (W). CFC is the reference design solution for the lower part of the vertical target of the ITER divertor. The armour is joined onto an actively cooled substrate, the heat sink, made of precipitation hardened copper alloy CuCrZr through a thin pure copper interlayer to decrease, by plastic deformation, the joint interface stresses; in fact, the CFC to Cu joint is affected by the CTE mismatch between the ceramic and metallic material. A new method of joining CFC to copper and CFC/Cu to CuCrZr alloy was effectively developed for the flat-type configuration; the feasibility of this process also for mono-block geometry and the development of a procedure for testing mono-block-type mock-ups is described in this work. The mono-block configuration consists of copper alloy pipe shielded by CFC blocks. It is worth noting that in mono-block configuration, the large thermal expansion mismatch between CFC and copper alloy is more significant than for flat-tile configuration, due to curved interfaces. The joining technique foresees a single-step brazing process: the brazing of the three materials (CFC-Cu-CuCrZr) can be performed in a single heat treatment using the same Cu/Ge based braze. The composite surface was modified by solid state reaction with chromium with the purpose of increasing the wettability of CFC by the brazing alloy. The CFC substrate reacts with Cr which, forming a carbide layer, allows a large reduction of the contact angle; then, the brazing of CFC to pure copper and pure copper to CuCrZr by the same treatment is feasible. This process allows to obtain good joints using a non

Single-step brazing process for mono-block joints and mechanical testing

International Nuclear Information System (INIS)

Casalegno, V.; Ferraris, M.; Salvo, M.; Rizzo, S.; Merola, M.

2007-01-01

Full text of publication follows: Plasma facing components act as actively cooled thermal shields to sustain thermal and particle loads during normal and transient operations in ITER (International Thermonuclear Experimental Reactor). The plasma-facing layer is referred to as 'armour', which is made of either carbon fibre reinforced carbon composite (CFC) or tungsten (W). CFC is the reference design solution for the lower part of the vertical target of the ITER divertor. The armour is joined onto an actively cooled substrate, the heat sink, made of precipitation hardened copper alloy CuCrZr through a thin pure copper interlayer to decrease, by plastic deformation, the joint interface stresses; in fact, the CFC to Cu joint is affected by the CTE mismatch between the ceramic and metallic material. A new method of joining CFC to copper and CFC/Cu to CuCrZr alloy was effectively developed for the flat-type configuration; the feasibility of this process also for mono-block geometry and the development of a procedure for testing mono-block-type mock-ups is described in this work. The mono-block configuration consists of copper alloy pipe shielded by CFC blocks. It is worth noting that in mono-block configuration, the large thermal expansion mismatch between CFC and copper alloy is more significant than for flat-tile configuration, due to curved interfaces. The joining technique foresees a single-step brazing process: the brazing of the three materials (CFC-Cu-CuCrZr) can be performed in a single heat treatment using the same Cu/Ge based braze. The composite surface was modified by solid state reaction with chromium with the purpose of increasing the wettability of CFC by the brazing alloy. The CFC substrate reacts with Cr which, forming a carbide layer, allows a large reduction of the contact angle; then, the brazing of CFC to pure copper and pure copper to CuCrZr by the same treatment is feasible. This process allows to obtain good joints using a non-active brazing

Use of sequential diagnostic pain blocks in a patient of posttraumatic complex regional pain syndrome-not otherwise specified complicated by myofascial trigger points and thoracolumbar pain syndrome

Directory of Open Access Journals (Sweden)

Kailash Kothari

2017-01-01

Full Text Available We are presenting a case of posttraumatic lower limb Complex regional pain syndrome – Not otherwise specified (CRPS – NOS. As it was not treated in acute phase, the pain became chronic and got complicated by myofascial and thoracolumbar pain syndrome. This case posed us a diagnostic challenge. We used sequential diagnostic pain blocks to identify the pain generators and successfully treat the patient. We used diagnostic blocks step by step to identify and treat pain generators – T12,L1 and L2 Facet joints, Lumbar sympathetic block for CRPS NOS and Trigger point injection with dry needling for myofascial pain syndrome. This case highlights the facet that additional pain generators unrelated to original pain may complicate the presentation. Identifying these pain generators requires out of box thinking and high index of suspicion.

Differences Regarding Branded HA in Italy, Part 2: Data from Clinical Studies on Knee, Hip, Shoulder, Ankle, Temporomandibular Joint, Vertebral Facets, and Carpometacarpal Joint

Science.gov (United States)

Migliore, A.; Bizzi, E.; De Lucia, O.; Delle Sedie, A.; Tropea, S.; Bentivegna, M.; Mahmoud, A.; Foti, C.

2016-01-01

OBJECTIVES The aim of the current study is to collect scientific data on all branded hyaluronic acid (HA) products in Italy that are in use for intra-articular (IA) injection in osteoarthritis (OA) compared with that reported in the leaflet. METHODS An extensive literature research was performed for all articles reporting data on the IA use of HA in OA. Selected studies were taken into consideration only if they are related to products based on HAs that are currently marketed in Italy with the specific joint indication for IA use in patients affected by OA. RESULTS Sixty-two HA products are marketed in Italy: 30 products are indicated for the knee but only 8 were proved with some efficacy; 9 products were effective for the hip but only 6 had hip indication; 7 products proved to be effective for the shoulder but only 3 had the indication; 5 products proved effective for the ankle but only one had the indication; 6 products were effective for the temporomandibular joint but only 2 had the indication; only 2 proved effective for vertebral facet joints but only 1 had the indication; and 5 products proved effective for the carpometacarpal joint but only 2 had the indication. CONCLUSIONS There are only a few products with some evidences, while the majority of products remain without proof. Clinicians and regulators should request postmarketing studies from pharmaceuticals to corroborate with that reported in the leaflet and to gather more data, allowing the clinicians to choose the adequate product for the patient. PMID:27279754

Facet orientation and tropism: Associations with asymmetric lumbar paraspinal and psoas muscle parameters in patients with chronic low back pain.

Science.gov (United States)

Xu, W B; Chen, S; Fan, S W; Zhao, F D; Yu, X J; Hu, Z J

2016-08-10

Many studies have explored the relationship between facet tropism and facet joint osteoarthritis, disc degeneration and degenerative spondylolisthesis. However, the associations between facet orientation and tropism, and paraspinal muscles have not been studied. To analyze the associations between facet orientation and tropism, and parameters of paraspinal muscles in patients with chronic low back pain. Ninety-five patients with chronic low back pain were consecutively enrolled. Their facet joint angles were measured on computed tomography (CT) while gross cross-sectional area (GCSA), functional cross-sectional area (FCSA) and T2 signal intensity of lumbar paraspinal and psoas muscle were evaluated on magnetic resonance imaging (MRI). The GCSA and FCSA were significantly smaller for multifidus muscle (Plow back pain. Longitudinal studies are needed to understand the causal relationship between facet orientation and tropism and muscular asymmetry in future.

Superior facet syndrome

International Nuclear Information System (INIS)

Kubo, Yoshichika; Igarashi, Seishi; Koyama, Tsunemaro

1985-01-01

Sciatica caused by root entrapment in the lateral recess was named superior facet syndrome by Epstein in 1972. Few reports on this subject based on large numbers of cases have been documented to date. Of the patients with sciatica, 32 patients were diagnosed to have root entrapment at the lateral recess L 5 or/and S 1 lumbar spine. Out of 32 patients, 20 patients were operated on and the lateral entrapment was recognized in all of surgical cases. Neuroradiological findings, especially of metrizamide CT (met. CT), were documented in detail. Thirty two patients were classified in three types according to radiological findings. They were congenital or developmental, degenerative, and combined type, respectively, Fourteen cases belonged to the congenital type, 13 to the degenerative and 5 to the combined type. Each group had the mean ages of 23.4, 53.8, and 36.8 years old, respectively. Of 32 cases the entrapment occured in 47 L 5 roots and 11 S 1 roots. There was no remarkable laterality. In operation the unroofing of the lateral recess were done and the sciatica subsided postoperatively in all of surgical cases. Met. CT revealed extreme medial protrusion of the superior articular joint in 18 of 24 cases(75%) and none filling of the root in the lateral recess in 21 of 24 cases (87.5%). In the degenerative type, met. CT showed some degenerative changes that were hypertrophy or deformity of the articular joints and spur formation of the vertebral body. In contrast to met. CT, metrizamide myelography revealed only slight changes, which were poor filling of the root before it turned out the pedicle of lateral compression of the root. In plain films or lumbar spine articular joints at Lsub(4/5) were formed in coronal plane in 69% of cases of the L 5 root entrapment. Met. CT using ReView technique was of great diagnostic value in superior facet syndrome. (author)

The therapeutic efficacy of sacroiliac joint blocks with triamcinolone acetonide in the treatment of sacroiliac joint dysfunction without spondyloarthropathy.

Science.gov (United States)

Liliang, Po-Chou; Lu, Kang; Weng, Hui-Ching; Liang, Cheng-Loong; Tsai, Yu-Duan; Chen, Han-Jung

2009-04-20

Prospective case series. The study aimed to investigate the therapeutic efficacy of sacroiliac joint (SIJ) blocks with triamcinolone acetonide in patients with SIJ pain without spondyloarthropathy. Numerous studies have demonstrated that SIJ blocks with corticosteroid/anesthetic provide long-term pain relief in seronegative spondyloarthropathy. However, only one report on SIJ dysfunction patients without spondyloarthropathy shows promising results. We conducted a prospective observational study of patients at a University Spine Center from March 2005 to May 2006. The above mentioned SIJ blocks were performed in 150 patients, and dual SIJ blocks confirmed SIJ pain in 39 patients (26%). Twenty-six patients (66.7%) experienced significant pain reduction for more than 6 weeks; the overall mean duration of pain reduction in these responders was 36.8 +/- 9.9 weeks. SIJ blocks were ineffective in 13 patients (33.3%); the mean duration of pain reduction in these patients was 4.4 +/- 1.8 weeks. Univariate analysis revealed that treatment failure was significantly associated with a history of lumbar/lumbosacral fusion (P = 0.03). SIJ blocks with triamcinolone acetonide are beneficial for some patients with SIJ pain without spondyloarthropathy. The SIJ blocks showed a long-lasting efficacy in two-thirds of the patients; however, the duration of its efficacy was shorter in patients with a history of lumbar/lumbosacral fusion. These findings suggest the need for further studies.

Development and Validation of the Faceted Inventory of the Five-Factor Model (FI-FFM).

Science.gov (United States)

Watson, David; Nus, Ericka; Wu, Kevin D

2017-06-01

The Faceted Inventory of the Five-Factor Model (FI-FFM) is a comprehensive hierarchical measure of personality. The FI-FFM was created across five phases of scale development. It includes five facets apiece for neuroticism, extraversion, and conscientiousness; four facets within agreeableness; and three facets for openness. We present reliability and validity data obtained from three samples. The FI-FFM scales are internally consistent and highly stable over 2 weeks (retest rs ranged from .64 to .82, median r = .77). They show strong convergent and discriminant validity vis-à-vis the NEO, the Big Five Inventory, and the Personality Inventory for DSM-5. Moreover, self-ratings on the scales show moderate to strong agreement with corresponding ratings made by informants ( rs ranged from .26 to .66, median r = .42). Finally, in joint analyses with the NEO Personality Inventory-3, the FI-FFM neuroticism facet scales display significant incremental validity in predicting indicators of internalizing psychopathology.

Joint Scheduling for Dual-Hop Block-Fading Broadcast Channels

KAUST Repository

Zafar, Ammar

2012-09-16

In this paper, we propose joint user-and-hop scheduling over dual-hop block-fading broadcast channels in order to exploit multi-user diversity gains and multi-hop diversity gains all together. To achieve this objective, the first and second hops are scheduled opportunistically based on the channel state information and as a prerequisite we assume that the relay, which is half-duplex and operates using decode-and-forward, is capable of storing the received packets from the source until the channel condition of the destined user becomes good to be scheduled. We formulate the joint scheduling problem as maximizing the weighted sum of the long term achievable rates by the users under a stability constraint, which means that on the long term the rate received by the relay should equal the rate transmitted by it, in addition to constant or variable power constraints. We show that this problem is equivalent to a single-hop broadcast channel by treating the source as a virtual user with an optimal priority weight that maintains the stability constraint. We show how to obtain the source weight either off-line based on channel statistics or on real-time based on channel measurements. Furthermore, we consider special cases including the maximum sum rate scheduler and the proportional fair scheduler. We demonstrate via numerical results that our proposed joint scheduling scheme enlarges the rate region as compared with a scheme that employs multi-user scheduling alone.

The cervical facet capsule and its role in whiplash injury: a biomechanical investigation.

Science.gov (United States)

Winkelstein, B A; Nightingale, R W; Richardson, W J; Myers, B S

2000-05-15

Cervical facet capsular strains were determined during bending and at failure in the human cadaver. To determine the effect of an axial pretorque on facet capsular strains and estimate the risk for subcatastrophic capsular injury during normal bending motions. Epidemiologic and clinical studies have identified the facet capsule as a potential site of injury and prerotation as a risk factor for whiplash injury. Unfortunately, biomechanical data on the cervical facet capsule and its role in whiplash injury are not available. Cervical spine motion segments were tested in a pure-moment test frame and the full-field strains determined throughout the facet capsule. Motion segments were tested with and without a pretorque in pure bending. The isolated facet was then elongated to failure. Maximum principal strains during bending were compared with failure strains, by paired t test. Statistically significant increases in principal capsular strains during flexion-extension loading were observed when a pretorque was applied. All measured strains during bending were significantly less than strains at catastrophic joint failure. The same was true for subcatastrophic ligament failure strains, except in the presence of a pretorque. Pretorque of the head and neck increases facet capsular strains, supporting its role in the whiplash mechanism. Although the facet capsule does not appear to be at risk for gross injury during normal bending motions, a small portion of the population may be at risk for subcatastrophic injury.

[Features of the new minimally invasive techniques facet fixation system «Facet Wedge» in the treatment of degenerative diseases of the lumbar spine in elderly patients.

Science.gov (United States)

Byvaltsev, V A; Kalinin, A A; Okoneshnikova, A K

2017-01-01

The aim of the study was a comparative analysis of the clinical and radiographic effectiveness of the use of interbody fusion and open pedicle screw stabilization of simultaneous and new minimally invasive techniques facet fixation system «Facet Wedge» in the treatment of degenerative diseases of the lumbar spine in elderly patients. The study included 39 elderly patients (older than 60), which carries out the transforaminal interbody fusion Cage «T-pal»: open transpedicaular stabilization was used in 1st group (n=23), ipsilateral open transpedicular stabilization with contralateral transfaset installing titanium Cage «facet Wedge» -in 2nd group (n=16). We used intraoperative interventions and specific post-operative patient management, clinical data and radiographic outcomes for a comparative analysis of the parameters. Dynamic assessment was made in a period of 8 to 36 months after surgery (median 24 mo.). As a result, it found that the use of the system «facet Wedge» allows you to achieve the best clinical outcomes and fewer postoperative complications compared with open transpedicular stabilization in similar radiographic findings of bone block formation. Low traumatic facet fixation makes it possible to use methods for the treatment of elderly patients with degenerative diseases of the lumbosacral spine.

Surgical treatment of traumatic cervical facet dislocation: anterior, posterior or combined approaches?

Directory of Open Access Journals (Sweden)

Catarina C. Lins

Full Text Available ABSTRACT Surgical treatment is well accepted for patients with traumatic cervical facet joint dislocations (CFD, but there is uncertainty over which approach is better: anterior, posterior or combined. We performed a systematic literature review to evaluate the indications for anterior and posterior approaches in the management of CFD. Anterior approaches can restore cervical lordosis, and cause less postoperative pain and less wound problems. Posterior approaches are useful for direct reduction of locked facet joints and provide stronger fixation from a biomechanical point of view. Combined approaches can be used in more complex cases. Although both anterior and posterior approaches can be used interchangeably, there are some patients who may benefit from one of them over the other, as discussed in this review. Surgeons who treat cervical spine trauma should be able to perform both procedures as well as combined approaches to adequately manage CFD and improve patients’ final outcomes.

Radiographic changes and factors associated with subsequent progression of damage in weight-bearing joints of patients with rheumatoid arthritis under TNF-blocking therapies-three-year observational study.

Science.gov (United States)

Matsushita, Isao; Motomura, Hiraku; Seki, Eiko; Kimura, Tomoatsu

2017-07-01

The long-term effects of tumor necrosis factor (TNF)-blocking therapies on weight-bearing joints in patients with rheumatoid arthritis (RA) have not been fully characterized. The purpose of this study was to assess the radiographic changes of weight-bearing joints in patients with RA during 3-year of TNF-blocking therapies and to identify factors related to the progression of joint damage. Changes in clinical variables and radiological findings in 243 weight-bearing joints (63 hips, 54 knees, 71 ankles, and 55 subtalar joints) in 38 consecutive patients were investigated during three years of treatment with TNF-blocking agents. Multivariate logistic regression analysis was used to identify risk factors for the progression of weight-bearing joint damage. Seventeen (14.5%) of proximal weight-bearing joints (hips and knees) showed apparent radiographic progression during three years of treatment, whereas none of the proximal weight-bearing joints showed radiographic evidence of improvement or repair. In contrast, distal weight-bearing joints (ankle and subtalar joints) displayed radiographic progression and improvement in 20 (15.9%) and 8 (6.3%) joints, respectively. Multivariate logistic analysis for proximal weight-bearing joints identified the baseline Larsen grade (p bearing joints identified disease activity at one year after treatment (p bearing joints. Disease activity after treatment was an independent factor for progression of damage in proximal and distal weight-bearing joints. Early treatment with TNF-blocking agents and tight control of disease activity are necessary to prevent the progression of damage of the weight-bearing joints.

Faceted Search

CERN Document Server

Tunkelang, Daniel

2009-01-01

We live in an information age that requires us, more than ever, to represent, access, and use information. Over the last several decades, we have developed a modern science and technology for information retrieval, relentlessly pursuing the vision of a "memex" that Vannevar Bush proposed in his seminal article, "As We May Think." Faceted search plays a key role in this program. Faceted search addresses weaknesses of conventional search approaches and has emerged as a foundation for interactive information retrieval. User studies demonstrate that faceted search provides more

Significance of interfacet distance, facet joint orientation, and lumbar lordosis in spondylolysis.

Science.gov (United States)

Chung, Sang-Bong; Lee, Sungjoon; Kim, Hoon; Lee, Sun-Ho; Kim, Eun Sang; Eoh, Whan

2012-04-01

The aim of this study is to reveal the association between lumbar spondylolysis and several radiologic parameters, which had been suggested to be significant. The authors examine interfacet distance (IFD), facet joint orientation (FJO), and lumbar segmental lordosis (LSL) all together on the basis of lumbar computed tomography (CT) scan of 35 patients with L5 spondylolysis and 36 unaffected control groups. Thirty-five Korean military recruits, aged 19-23 (mean 20.9 years), were diagnosed as L5 spondylolysis by lumber CT scans. As a control group, 36 male Korean military recruits, aged 18-25 (mean 21.3 years), were reconfirmed as not affected by lumbar spondylolysis by CT scan when they visited our hospital complaining of back pain. This study compares IFD, FJO, and LSL for each lumbar segment between the spondylolytic and unaffected groups. We also propose the use of normal mean data of IFD, FJO, and LSL of lumbar vertebrae from 36 Korean young military recruits because each measurement has power as an absolute value, like data from an osteologic collection in other studies. Comparison of IFD between spondylolytic and unaffected individuals reveals significant differences at the L3, L4, and L5 level (P = 0.0384, P = 0.0219, and P spondylolysis, the increase of IFD from L4 to S1 was less pronounced (P spondylolysis and individuals without pars defect on L5. In the spondylolysis group, and the increase of IFD from L4 to S1 was less pronounced and the LSL at L5-S1 was more lordotic. Copyright © 2011 Wiley Periodicals, Inc.

Avaliação clínica da infiltração facetaria no tratamento da dor lombar crônica por síndrome facetaria: estudo prospectivo Evaluación clínica de la infiltración de las facetas en el tratamiento del dolor crónico de espalda baja por el síndrome de faceta síndrome: estudio prospectivo Clinical evaluation of the lumbar facet joint blocks in treatment of chronic low back pain: a prospective study

Directory of Open Access Journals (Sweden)

Thiago Miller Santana Silva

2011-01-01

Full Text Available OBJETIVO: Avaliar os resultados do bloqueio facetário lombar com anestésico local e corticóide em pacientes com lombalgia crônica por síndrome facetária. MÉTODOS: Realizou-se um estudo prospectivo em 30 pacientes com lombalgia crônica por síndrome facetária, os quais foram submetidos à infiltração facetária com bupivacaína a 0,25% e acetato de metilpredinisolona sob controle radioscópico, e foram seguidos e avaliados seguindo as escalas Visual Analógica da Dor, Oswestry Disability Index e os Critérios de MacNab nos quais 17 foram do sexo feminino e 13 do sexo masculino. RESULTADOS: Foi observada diminuição significativa (pOBJETIVO: Evaluar los resultados del bloqueo facetario lumbar, con anestésico local y corticoide, en pacientes con dorsalgia crónica por síndrome facetario. MÉTODOS: Se realizó un estudio prospectivo en 30 pacientes, 17 del sexo femenino y 13 del sexo masculino, con dorsalgia crónica por síndrome facetario, quienes fueron sometidos a la infiltración facetaria con bupivacaína a 0,25% y acetato de metilpredinisolona bajo control radioscópico, y fueron acompañados y evaluados siguiendo las escalas Visual Analógica del Dolor, Oswestry Disability Index y los Criterios de MacNab. RESULTADOS: Se observó una disminución significativa (pOBJECTIVE: To evaluate the lumbar facet block with local anesthetics and corticosteroids in patients with chronic low back pain of facet joint origin. METHODS: We conducted a prospective study on 30 patients with chronic low back pain in facet syndrome who underwent facet infiltration with bupivacaine 0.25% and methylprednisolone acetate under radioscopic control; the subjects were followed and evaluated following the Visual Analogue Scale of Pain , Oswestry Disability Index and MacNab criteria; 17 of them were female and 13 male. RESULTS: Reduction of pain was found by Visual Analogue Scale significant (p <0.05. We obtained 73.3% of satisfactory results in the first

Facet development for a faceted stretched-membrane dish by Solar Kinetics, Inc

Energy Technology Data Exchange (ETDEWEB)

Schertz, P.T.; Brown, D.C.; Konnerth, A. III (Solar Kinetics, Inc., Dallas, TX (United States))

1991-07-01

A 3.6-meter diameter stretched-membrane optical facet for a parabolic dish has been successfully designed and demonstrated under contract with Sandia National Laboratories. Twelve facets identical to them will be used to make the lightweight reflector of the dish. The project goal of 2.5-mrad surface accuracy was met with each of the two full-sized prototypes, and accuracies of as low as 1.1 mrad were achieved. The facet weight is 11.7 kg/m{sup 2} (2.4lbs/ft{sup 2}). The facet is similar in construction to the successful stretched-membrane heliostat; it has two thin metal membranes attached to a ring. However, the front membrane for this facet is plastically formed at the factor in order to achieve a shorter facet f/D (approximately 3.0). A passive tether restrains the from membrane when not in operation, that is, when the stabilizing vacuum is off. The optical surface is achieved with a silvered-acrylic film laminated to the metal membrane. The facet is expected to cost $55.40/m{sup 2} at a production rate of 10,000 facets per year and $115, 000/m{sup 2}-at a production rate of 500 facets a year. Several key issues have been resolved. Stress concentrations due to seams in the reflective laminate did not cause membrane rupture during forming as they have for dishes with lower focal length-to-diameter ratios. The laminate survived the forming process and simulated operation without deterioration. The optical effect of the tether on the membrane was tested and found to be very small. Most important, highly accurate shapes were obtained using a simple forming procedure. Additional tests are needed to demonstrate process repeatablility and facet performance in typical operating conditions. 18 refs., 36 figs., 11 tabs.

An alternative design of reference blocks during the ultrasonic of ferritic welded joints

International Nuclear Information System (INIS)

Rondon Torriente, S.; Galeano Alvarez, N.J.

1996-01-01

This paper describes an alternative design which can be used to construct the reference blocks required to make the sensibility adjustment during the ultrasonic control ferritic welded joints. The major possibilities of this design are seen when it's used together with the well known AVG method, however it can be properly used with the reference block technique. In addition, the most general facts to keep in mind during the construction of this means are outlined, and besides advantages and problems involved with the use of some basics reference reflectors of wide spread use. Also formulates are given that can be used to obtain the size of the disk shaped reflector corresponding to the basics reference reflectors that this design includes

Facet-controlled synthesis and facet-dependent photocatalytic properties of SnO{sub 2} micropolyhedrons

Energy Technology Data Exchange (ETDEWEB)

Zhou, Gengxia [Key Laboratory of Modern Acoustics, MOE, Institute of Acoustics and Collaborative Innovation Center of Advanced Microstructures, National Laboratory of Solid State Microstructures, Nanjing University, Nanjing 210093 (China); Wu, Xinglong, E-mail: hkxlwu@nju.edu.cn [Key Laboratory of Modern Acoustics, MOE, Institute of Acoustics and Collaborative Innovation Center of Advanced Microstructures, National Laboratory of Solid State Microstructures, Nanjing University, Nanjing 210093 (China); Liu, Lizhe; Zhu, Xiaobin [Key Laboratory of Modern Acoustics, MOE, Institute of Acoustics and Collaborative Innovation Center of Advanced Microstructures, National Laboratory of Solid State Microstructures, Nanjing University, Nanjing 210093 (China); Zhu, Xiaoshu [Center for Analysis and Testing, Nanjing Normal University, Nanjing 210093 (China); Hao, Yanling [Key Laboratory of Modern Acoustics, MOE, Institute of Acoustics and Collaborative Innovation Center of Advanced Microstructures, National Laboratory of Solid State Microstructures, Nanjing University, Nanjing 210093 (China); Chu, Paul K. [Department of Physics and Materials Science, City University of Hong Kong, Tat Chee Avenue, Kowloon, Hong Kong (China)

2015-09-15

Graphical abstract: - Highlights: • SnO{sub 2} micropolyhedrons with (1 0 1) and (1 0 0) facets at different ratios are fabricated. • The vapor–solid growth mechanism of micropolyhedrons is discussed. • SnO{sub 2} octahedrons with complete (1 0 1) facets show strong photocatalytic activity. • Enhanced photocatalytic activity stems from the facet-dependent surface states. - Abstract: The facet-dependent properties of SnO{sub 2} are of fundamental and practical importance. In this study, by adjusting the deposition temperature during chemical vapor deposition, octahedral SnO{sub 2} with the exposed (1 0 1) facet and two other kinds of SnO{sub 2} polyhedrons with (1 0 1) and (1 0 0) facets with different ratios are fabricated controllably based on the vapor–solid growth mechanism. A slight increase in the deposition temperature from 1030 to 1070 °C decreases the surface energy of the reduced (1 0 1) facet with Sn termination, leading to the formation of polyhedrons with different area ratios of (1 0 1) to (1 0 0) facets. By adopting the terephthalic acid fluorescent method, the SnO{sub 2} octahedrons are demonstrated to have the strongest photocatalytic activity due to the formation of surface states induced by 5s electrons of bivalent Sn on the (1 0 1) surface. The results reveal that the photocatalytic properties of SnO{sub 2} microcrystals can be enhanced by facet-controlled synthesis.

Effects of Facet Joint Injection Reducing the Need for Percutaneous Vertebroplasty in Vertebral Compression Fractures

Energy Technology Data Exchange (ETDEWEB)

Im, Tae Seong; Lee, Joon Woo; Lee, Eugene; Kang, Yusuhn; Ahn, Joong Mo, E-mail: joongmoahn@gmail.com; Kang, Heung Sik [Seoul National University Bundang Hospital, Department of Radiology (Korea, Republic of)

2016-05-15

ObjectiveTo evaluate the effects of facet joint injection (FJI) reducing the need for percutaneous vertebroplasty (PVP) in cases of vertebral compression fracture (VCF).Materials and MethodsA total of 169 patients who were referred to the radiology department of our institution for PVP between January 2011 and December 2014 were retrospectively evaluated. The effectiveness of FJI was evaluated by the proportion of patients who cancelled PVP and who experienced reduced pain. In addition, by means of medical chart and MRI review, those clinical factors (age, sex, history of trauma, amount of injected steroids and interval days elapsed between VCF and FJI) and MR image factors (kyphosis angle, height loss, single or multiple level of VCF, burst fracture, central canal compromise, posterior element injury) that were believed to be significant for the effectiveness of FJI were statistically analysed.ResultsIn the 26 patients with FJI prior to PVP, six (23 %) patients cancelled PVP with considerable improvement in reported pain. In the 20 patients with PVP after FJI, improvement in pain after FJI was reported by six patients, resulting in a total of 12 patients (46 %) who experienced reduced pain after FJI. Clinical factors and MR image factors did not show any statistically significant difference between those groups, divided by PVP cancellation and by improvement of pain.ConclusionAfter FJI prior to PVP, about one quarter of patients cancelled PVP due to reduced pain and overall about half of the patients experienced reduced pain.

Indian Hedgehog signaling pathway members are associated with magnetic resonance imaging manifestations and pathological scores in lumbar facet joint osteoarthritis

Science.gov (United States)

Shuang, Feng; Zhou, Ying; Hou, Shu-Xun; Zhu, Jia-Liang; Liu, Yan; Zhang, Chun-Li; Tang, Jia-Guang

2015-05-01

Indian Hedgehog (HH) has been shown to be involved in osteoarthritis (OA) in articular joints, where there is evidence that Indian HH blockade could ameliorate OA. It seems to play a prominent role in development of the intervertebral disc (IVD) and in postnatal maintenance. There is little work on IHH in the IVD. Hence the aim of the current study was to investigate the role of Indian Hedgehog in the pathology of facet joint (FJ) OA. 24 patients diagnosed with lumbar intervertebral disk herniation or degenerative spinal stenosis were included. Preoperative magnetic resonance imaging (MRI) and Osteoarthritis Research Society International (OARSI) histopathology grading system was correlated to the mRNA levels of GLI1, PTCH1, and HHIP in the FJs. The Weishaupt grading and OARSI scores showed high positive correlation (r = 0.894) (P < 0.01). MRI Weishaupt grades showed positive correlation with GLI1 (r = 0.491), PTCH1 (r = 0.444), and HHIP (r = 0.654) mRNA levels (P < 0.05 in each case). OARSI scores were also positively correlated with GLI1 (r = 0. 646), PTCH1 (r = 0. 518), and HHIP (r = 0.762) mRNA levels (P < 0.01 in each case). Cumulatively our findings indicate that Indian HH signaling is increased in OA and is perhaps a key component in OA pathogenesis and progression.

FACET

International Nuclear Information System (INIS)

Cole, C.W.; Banszky, I.J.

1989-01-01

The merits of using commercially available software packages versus in-house software and databases are frequently assessed by cost engineers in consulting, contracting and operating companies alike. There is no consensus on which approach is better as each company has individual requirements that are better provided for by one or the other alternative. This paper describes Mobil Oil Canada's FACET (Facilities Cost Estimating Techniques) programs and provides a framework for building any successful in-house PC-based cost estimating and control system. The FACET series of programs enables detailed cost estimates to be quickly developed from relatively conceptual cost data and allows project cost estimates to be compared with actual costs as the project proceeds

Superior facet syndrome. Findings on metrizamide CT myelography

Energy Technology Data Exchange (ETDEWEB)

Kubo, Yoshichika; Igarashi, Seishi; Koyama, Tsunemaro

1985-02-01

Sciatica caused by root entrapment in the lateral recess was named superior facet syndrome by Epstein in 1972. Few reports on this subject based on large numbers of cases have been documented to date. Of the patients with sciatica, 32 patients were diagnosed to have root entrapment at the lateral recess L5 or/and S1 lumbar spine. Out of 32 patients, 20 patients were operated on and the lateral entrapment was recognized in all of surgical cases. Neuroradiological findings, especially of metrizamide CT (met. CT), were documented in detail. Thirty two patients were classified in three types according to radiological findings. They were congenital or developmental, degenerative, and combined type, respectively. Fourteen cases belonged to the congenital type, 13 to the degenerative and 5 to the combined type. Each group had the mean ages of 23.4, 53.8, and 36.8 years old, respectively. Of 32 cases the entrapment occured in 47 L5 roots and 11 S1 roots. There was no remarkable laterality. In operation the unroofing of the lateral recess were done and the sciatica subsided postoperatively in all of surgical cases. Met. CT revealed extreme medial protrusion of the superior articular joint in 18 of 24 cases(75%) and none filling of the root in the lateral recess in 21 of 24 cases (87.5%). In the degenerative type, met. CT showed some degenerative changes that were hypertrophy or deformity of the articular joints and spur formation of the vertebral body. In contrast to met. CT, metrizamide myelography revealed only slight changes, which were poor filling of the root before it turned out the pedicle of lateral compression of the root. In plain films or lumbar spine articular joints at Lsub(4/5) were formed in coronal plane in 69% of cases of the L5 root entrapment. Met. CT using ReView technique was of great diagnostic value in superior facet syndrome.

Facets of Facebook: Use and Users

OpenAIRE

2016-01-01

The debate on Facebook raises questions about the use and users of this information service. This collected volume gathers a broad spectrum of social science and information science articles about Facebook.Facebook has many facets, and we just look forward above all to the use and users. The facet of users has sub-facets, such as different age, sex, and culture. The facet of use consists of sub-facets of privacy behavior after the Snowden affair, dealing with friends, unfriending and becoming...

Correlation between facet tropism and lumbar degenerative disease: a retrospective analysis.

Science.gov (United States)

Gao, Tian; Lai, Qi; Zhou, Song; Liu, Xuqiang; Liu, Yuan; Zhan, Ping; Yu, Xiaolong; Xiao, Jun; Dai, Min; Zhang, Bin

2017-11-22

The aim of this study was to investigate the correlation between facet tropism and spinal degenerative diseases, such as degenerative lumbar spondylolisthesis, degenerative lumbar scoliosis, and lumbar disc herniation. This study retrospectively analysed clinical data from the Department of Orthopaedics at The First Affiliated Hospital of Nanchang University. Ninety-two patients were diagnosed with lumbar spondylolisthesis, 64 patients with degenerative scoliosis, and 86 patients with lumbar disc herniation between 1 October 2014 and 1 October 2016. All patients were diagnosed using 3.0 T magnetic resonance imaging and underwent conservative or operative treatment. Facet tropism was defined as greater than a ten degree between the facet joint angles on both sides. For L3-L4 degenerative lumbar spondylolisthesis, one out of six cases had tropism compared to seven out of the 86 controls (p = 0.474). At the L4-L5 level, 17/50 cases had tropism compared to 4/42 cases in the control group (p = 0.013). At the L5-S1 level, 18/36 cases had tropism compared to 7/56 controls (p = 0.000). For degenerative lumbar scoliosis at the L1-L5 level, 83/256 cases had tropism as compared to 36/256 controls (p = 0.000). For L3-L4 lumbar disc herniation two out of eight cases had tropism compared to 14/78 controls (p = 0.625). At the L4-L5 level, 19/44 cases had tropism compared to four out of 42 controls (p = 0.001). At the L5-S1 level, 24/34 cases had tropism compared to 10/52 controls (p = 0.000). At the L4-5 and L5-S1 levels, facet tropism is associated with degenerative spondylolisthesis. In the degenerative lumbar scoliosis group, the number of case with facet tropism was significantly higher than that of the control group. Facet tropism was associated with lumbar disc herniation at the L4-5 and L5-S1 levels. Overall, in these three lumbar degenerative diseases, facet tropism is a common phenomenon.

Distraction of facets with intraarticular spacers as treatment for lumbar canal stenosis: report on a preliminary experience with 21 cases.

Science.gov (United States)

Goel, Atul; Shah, Abhidha; Jadhav, Madan; Nama, Santhosh

2013-12-01

The authors report their experience in treating 21 patients by using a novel form of treatment of lumbar degenerative disease that leads to canal stenosis. The surgery involved distraction of the facets using specially designed Goel intraarticular spacers and was aimed at arthrodesis of the spinal segment in a distracted position. The operation is based on the premise that subtle and longstanding facet instability, joint space reduction, and subsequent facet override had a profound and primary influence in the pathogenesis of degenerative lumbar canal stenosis. The surgical technique and the rationale for treatment are discussed. Between April 2006 and January 2011, 21 cases of lumbar degenerative disease resulting in characteristic lumbar canal stenosis were treated in the authors' department with the proposed technique. The patients were prospectively analyzed. There were 15 men and 6 women who ranged in age from 48 to 71 years (mean 58 years). Nine patients underwent 1-level and 12 patients underwent 2-level treatment. Surgery involved wide opening of the articular joint, denuding of the articular capsule/endplate cartilage, distraction of the facets, and forced impaction of Goel intraarticular spacers. Bone graft pieces obtained by sectioning the spinous processes were placed within and over the joint and in the midline over the adequately prepared host area of laminae. The Oswestry Disability Index and visual analog scale were used to clinically assess the patients before and after surgery and at follow-up. The alterations in the physical architecture of spinal canal and intervertebral foramen dimensions were evaluated before and after placement of the intrafacet implant and after at least 6 months of follow-up. All patients had varying degrees of relief from symptoms of local back pain and radiculopathy. Impaction of spacers within the facet joints resulted in an increase in the spinal canal and intervertebral root canal dimensions (mean 2.33 mm), reduction

Facet Effusion without Radiographic Instability Has No Effect on the Outcome of Minimally Invasive Decompression Surgery.

Science.gov (United States)

Tamai, Koji; Kato, Minori; Konishi, Sadahiko; Matsumura, Akira; Hayashi, Kazunori; Nakamura, Hiroaki

2017-02-01

Retrospective cohort study. Lumbar segmental instability is a key factor determining whether decompression alone or decompression and fusion surgery is required to treat lumbar spinal stenosis (LSS). Some recent reports have suggested that facet joint effusion is correlated with spinal segmental instability. The aim of this study is to report the effect of facet effusion without radiographic segmental instability on the outcome of less-invasive decompression surgery for LSS. Seventy-nine patients with LSS (32 women, mean age: 69.1 ± 9.1 years) who had no segmental instability on dynamic radiographs before undergoing L4-L5 microsurgical decompression and who were followed for at least 2 years postoperatively were analyzed. They were divided into three groups on the basis of the existence and size of L4-L5 facet effusion using preoperative magnetic resonance imaging: grade 0 had no effusion ( n  = 31), grade 1 had measurable effusion ( n  = 35), and grade 2 had large effusion ( n  = 13). Japanese Orthopedics Association (JOA) score, visual analog scale (VAS), and the Short-Form (SF)-36 scores were recorded preoperatively and 12 and 24 months postoperatively. JOA score; VAS of low back pain, leg pain, and numbness; and SF-36 (physical component summary and mental component summary) scores did not differ significantly between the three groups in every terms ( p  = 0.921, 0.996, 0.950, 0.693, 0.374, 0.304, and 0.624, respectively, at final follow-up). In the absence of radiographic instability, facet joint effusion has no effect on the outcome of less-invasive decompression surgery.

Facetal distraction as treatment for single- and multilevel cervical spondylotic radiculopathy and myelopathy: a preliminary report.

Science.gov (United States)

Goel, Atul; Shah, Abhidha

2011-06-01

The authors discuss their successful preliminary experience with 36 cases of cervical spondylotic disease by performing facetal distraction using specially designed Goel cervical facet spacers. The clinical and radiological results of treatment are analyzed. The mechanism of action of the proposed spacers and the rationale for their use are evaluated. Between 2006 and February 2010, 36 patients were treated using the proposed technique. Of these patients, 18 had multilevel and 18 had single-level cervical spondylotic radiculopathy and/or myelopathy. The average follow-up period was 17 months with a minimum of 6 months. The Japanese Orthopaedic Association classification system, visual analog scale (neck pain and radiculopathy), and Odom criteria were used to monitor the clinical status of the patient. The patients were prospectively analyzed. The technique of surgery involved wide opening of the facet joints, denuding of articular cartilage, distraction of facets, and forced impaction of Goel cervical facet spacers into the articular cavity. Additionally, the interspinous process ligaments were resected, and corticocancellous bone graft from the iliac crest was placed and was stabilized over the adjoining laminae and facets after adequately preparing the host bone. Eighteen patients underwent single-level, 6 patients underwent 2-level, and 12 patients underwent 3-level treatment. The alterations in the physical architecture of spine and canal dimensions were evaluated before and after the placement of intrafacet joint spacers and after at least 6 months of follow-up. All patients had varying degrees of relief from symptoms of pain, radiculopathy, and myelopathy. Analysis of radiological features suggested that the distraction of facets with the spacers resulted in an increase in the intervertebral foraminal dimension (mean 2.2 mm), an increase in the height of the intervertebral disc space (range 0.4-1.2 mm), and an increase in the interspinous distance (mean 2

A comparison of physical and psychological features of responders and non-responders to cervical facet blocks in chronic whiplash

Science.gov (United States)

2013-01-01

Background Cervical facet block (FB) procedures are often used as a diagnostic precursor to radiofrequency neurotomies (RFN) in the management of chronic whiplash associated disorders (WAD). Some individuals will respond to the FB procedures and others will not respond. Such responders and non-responders provided a sample of convenience to question whether there were differences in their physical and psychological features. This information may inform future predictive studies and ultimately the clinical selection of patients for FB procedures. Methods This cross-sectional study involved 58 individuals with chronic WAD who responded to cervical FB procedures (WAD_R); 32 who did not respond (WAD_NR) and 30 Healthy Controls (HC)s. Measures included: quantitative sensory tests (pressure; thermal pain thresholds; brachial plexus provocation test); nociceptive flexion reflex (NFR); motor function (cervical range of movement (ROM); activity of the superficial neck flexors during the cranio-cervical flexion test (CCFT). Self-reported measures were gained from the following questionnaires: neuropathic pain (s-LANSS); psychological distress (General Health Questionnaire-28), post-traumatic stress (PDS) and pain catastrophization (PCS). Individuals with chronic whiplash attended the laboratory once the effects of the blocks had abated and symptoms had returned. Results Following FB procedures, both WAD groups demonstrated generalized hypersensitivity to all sensory tests, decreased neck ROM and increased superficial muscle activity with the CCFT compared to controls (p 0.05). Both WAD groups demonstrated psychological distress (GHQ-28; p < 0.05), moderate post-traumatic stress symptoms and pain catastrophization. The WAD_NR group also demonstrated increased medication intake and elevated PCS scores compared to the WAD_R group (p < 0.05). Conclusions Chronic WAD responders and non-responders to FB procedures demonstrate a similar presentation of sensory disturbance, motor

Quantum mechanical facets of chemical bonds

International Nuclear Information System (INIS)

Daudel, R.

1976-01-01

To define the concept of bond is both a central problem of quantum chemistry and a difficult one. The concept of bond appeared little by little in the mind of chemists from empirical observations. From the wave-mechanical viewpoint it is not an observable. Therefore there is no precise operator associated with that concept. As a consequence there is not a unique approach to the idea of chemical bond. This is why it is preferred to present various quantum mechanical facets, e.g. the energetic facet, the density facet, the partitioning facet and the functional facet, of that important concept. (Auth.)

The Variations in Calcaneal Articular Facets In North Indian Population and its Clinical Implication

Directory of Open Access Journals (Sweden)

Seema

2012-01-01

Full Text Available Aims and Objectives- To know the most common type of calcanei in North Indian population and itsclinical importance. There are three articular facets on superior surface of calcaneus- anterior, middle andposterior. Three types of calcanei are noted according to number and arrangement of the articular facets-type A, B and C. Methodology - The present studywas done on 300 dry adult human calcanei of unknownsex taken from Department of Anatomy Sri Guru Ram Das Institute of Medical Sciences and ResearchVallah (Amritsar. Results- In our study Type B was found as the most common type. Type A is the nextmost common. Interpretation- The talocalcaneal joint is important in arthritis and coalition, flat foot, valgus deformity, congenital anomalies and intra articular fractures.

Intra-articular calcaneal fractures: effect of open reduction and internal fixation on the contact characteristics of the subtalar joint.

Science.gov (United States)

Mulcahy, D M; McCormack, D M; Stephens, M M

1998-12-01

Intra-articular calcaneal fractures are associated with significant long-term morbidity, and considerable controversy exists regarding the optimum method of treating them. The contact characteristics in the intact subtalar joint were determined at known loads and for different positions of the ankle and subtalar joint, using pressure-sensitive film (Super Low; Fuji, Itochu Canada Ltd, Montreal, Quebec). We measured the contact area to joint area ratio (pressure > 5 kg force/cm2 [kgf/cm2]) which normalizes for differences in joint size and the ratio of high pressure zone (>20 kgf/cm2) as a reflection of overall increase in joint pressure. Three simulated fracture patterns were then created and stabilized with either 1 or 2 mm of articular incongruity. Eight specimens were prepared with a primary fracture line through the posterior facet, eight with a joint depression-type fracture, and six with a central joint depression fracture. A measure of 1 to 2 mm of incongruity in the posterior facet for all three fracture patterns produced significant unloading of the depressed fragment, with a redistribution of the overall pattern of pressure distribution to parts of the facet that were previously unloaded.

Association of facet tropism and progressive facet arthrosis after lumbar total disc replacement using ProDisc-L.

Science.gov (United States)

Shin, Myung-Hoon; Ryu, Kyeong-Sik; Hur, Jung-Woo; Kim, Jin-Sung; Park, Chun-Kun

2013-08-01

The purpose of this retrospective study was to examine the association of facet tropism and progressive facet arthrosis (PFA) after lumbar total disc replacement (TDR) surgery using ProDisc-L. A total of 51 segments of 42 patients who had undergone lumbar TDR using ProDisc-L between October 2003 and July 2007 and completed minimum 36-month follow-up period were retrospectively reviewed. The changes of facet arthrosis were categorized as non-PFA and PFA group. Comparison between non-PFA and PFA group was made according to age, sex, mean follow-up duration, grade of preoperative facet arthrosis, coronal and sagittal prosthetic position and degree of facet tropism. Multiple logistic regression analysis was also performed to analyze the effect of facet tropism on the progression of facet arthrosis. The mean age at the surgery was 44.43 ± 11.09 years and there were 16 males and 26 females. The mean follow-up period was 53.18 ± 15.79 months. Non-PFA group was composed of 19 levels and PFA group was composed of 32 levels. Age at surgery, sex proportion, mean follow-up period, level of implant, grade of preoperative facet arthrosis and coronal and sagittal prosthetic position were not significantly different between two groups (p = 0.264, 0.433, 0.527, 0.232, 0.926, 0.849 and 0.369, respectively). However, PFA group showed significantly higher degree of facet tropism (7.37 ± 6.46°) than that of non-PFA group (3.51 ± 3.53°) and p value was 0.008. After adjustment for age, sex and coronal and sagittal prosthetic position, multiple logistic regression analysis revealed that facet tropism of more than 5° was the only significant independent predictor of progression of facet arthrosis (odds ratio 5.39, 95 % confidence interval 1.251-19.343, p = 0.023). The data demonstrate that significant higher degree of facet tropism was seen in PFA group compared with non-PFA group and facet tropism of more than 5° had a significant association with PFA after TDR using ProDisc-L.

The hamatolunate facet: characterization and association with cartilage lesions - magnetic resonance arthrography and anatomic correlation in cadaveric wrists

Energy Technology Data Exchange (ETDEWEB)

Pfirrmann, C.W.A. [Department of Radiology, Veterans Administration Medical Center, 3350 La Jolla Village Dr., San Diego, CA 92161 (United States); Orthopedic University Hospital Balgrist, Department of Radiology, Forchstrasse 340, 8008 Zurich (Switzerland); Theumann, N.H.; Chung, C.B.; Trudell, D.J.; Resnick, D. [Department of Radiology, Veterans Administration Medical Center, 3350 La Jolla Village Dr., San Diego, CA 92161 (United States)

2002-08-01

The objective of this study was to characterize the appearance of the hamatolunate facet using high-resolution magnetic resonance (MR) arthrography in cadavers and to correlate the presence of this anatomic variant with the presence of osteoarthritis in the wrist. High-resolution MR images of 22 cadaveric wrist specimens were obtained after tri-compartmental arthrography. Two readers in consensus analyzed the MR images and recoded the presence or absence of a hamatolunate facet. Geometric characteristics and cartilage and ligament integrity were analyzed. A third reader, who was blinded to the purpose of the study, recorded cartilage lesions of all the bones of the proximal and distal carpal rows. A hamatolunate facet was present in 11 of 22 wrists (50%). The mean coronal size of the lunate facet at the lunate (type II lunate) was 4.5 mm (range, 2-6 mm). The highest frequencies of cartilage lesions were seen in the scapho-trapezio-trapezoid joint (45.5%) and at the proximal pole of the hamate (54.4% and 40.9% for consensus reading/blinded reading, respectively). In cases with a hamatolunate facet, the frequency of cartilage lesions in the proximal pole of the hamate was 81.8% and 63.6% versus 27.3% and 18.2% without such a facet (chi-squared, P=0.01/P=0.03). No correlation of the presence of a hamatolunate facet with interosseous ligament tears or lesions of the triangular fibrocartilage was seen. In conclusion, the hamatolunate facet is a very common anatomic variant. The presence of a hamatolunate facet is associated with cartilage damage in the proximal pole of the hamate. (orig.)

Lumbar Facet Tropism: A Comprehensive Review.

Science.gov (United States)

Alonso, Fernando; Kirkpatrick, Christina M; Jeong, William; Fisahn, Christian; Usman, Sameera; Rustagi, Tarush; Loukas, Marios; Chapman, Jens R; Oskouian, Rod J; Tubbs, R Shane

2017-06-01

Scattered reports exist in the medical literature regarding facet tropism. However, this finding has had mixed conclusions regarding its origin and impact on the normal spine. We performed a literature review of the anatomy, embryology, biomechanics, and pathology related to lumbar facet tropism. Facet tropism is most commonly found at L4-L5 vertebral segments and there is some evidence that this condition may lead to facet degenerative spondylolisthesis, intervertebral disc disease, and other degenerative conditions. Long-term analyses of patients are necessary to elucidate relationships between associated findings and facet tropism. In addition, a universally agreed definition that is more precise should be developed for future investigative studies. Copyright © 2017 Elsevier Inc. All rights reserved.

Morphometric analysis of the cervical facets and the feasibility, safety, and effectiveness of Goel inter-facet spacer distraction technique

Directory of Open Access Journals (Sweden)

Abhidha Shah

2014-01-01

Full Text Available Aim: Quantitative anatomy of the facets of the sub-axial cervical spine was performed. The purpose of the evaluation was to determine the feasibility of insertion of Goel inter-facetal articular spacers in the sub-axial cervical spine. Only few studies detailing the morphometry of the facets are available in the literature. Materials and Methods: Ten cervical vertebrae from C3 to C7 with a total of 20 facets were evaluated by the author. The anatomic parameters studied were the height, width, thickness, shape, orientation, and inclination of each of the superior and inferior facets. The alterations in a number of intervertebral segmental distances were measured before and after spacer insertion. The distance of the inferior facet from the foramen tranversarium, spinal canal, and neural foramina was measured to assess safety of spacer insertion with respect to the vertebral artery and neural structures. Results: The height, width and thickness of the superior facets from C3 to C7 ranged from 6 to 12 mm, 8 to 12 mm, and 2.5 to 6 mm, respectively. The inferior facets had an average height of 10.5 mm, average width of 11.2 mm and average thickness of 3.5 mm. The inclination of the superior facets with respect to the transverse plane ranged from 22° to 45° and that of the inferior facets ranged from 29° to 53°. The distance of the anterior margin of the inferior facet from the posterior border of the foramen transversium ranged from 5 to 7 mm. This distance was maximum at C3 level, then decreased at C4 and remained constant from C5 to C7. Conclusion: This anatomic evaluation aided in understanding the morphology of the cervical facets and the suitability of the cervical facetal articular cavity for insertion of spacers.

Does increased femoral antetorsion predispose to cartilage lesions of the patellofemoral joint?

Science.gov (United States)

Oppermann, Johannes; Bredow, Jan; Wissusek, Boris; Spies, Christian Karl; Boese, Christoph Kolja; Chang, Shi-Min; Eysel, Peer; Dargel, Jens

2017-09-01

The purpose of this study was to investigate whether there was a relationship between femoral neck antetorsion and the presence and pattern of osteoarthritis of the patellofemoral joint. It was hypothesized that an increased femoral neck antetorsion (1) correlates with osteoarthritic changes of the lateral facet of the patellofemoral joint and (2) correlates with an increased lateral trochlear height and a decreased sulcus angle. Seventy-eight formalin-embedded cadaveric lower extremities from thirty-nine subjects with a median age of 74 years (range 60-88) were used. Surrounding soft tissues of the lower limb were removed. The femoral neck antetorsion was measured and referenced to the transepicondylar axis and the posterior condylar line. The height of the medial and lateral facet of the trochlea and the sulcus angle was measured. The location and the degree of patellofemoral cartilage degeneration were recorded. A Pearson's correlation analysis was performed to correlate the femoral neck antetorsion with the measured knee parameters. No significant correlation could be found between the femoral antetorsion and cartilage degeneration of the lateral patellofemoral joint (n.s.), the height of the lateral trochlea (n.s.) and the sulcus angle (n.s.). This study could not document that the femoral neck antetorsion and subsequent internal rotation of the distal femur correlated with the degree of degeneration of the lateral facet of the patellofemoral joint. Clinically, femoral internal rotation may play a minor role in the development of lateral patellofemoral joint degeneration.

Mindfulness facets and Big Five personality facets in persons with recurrent depression in remission

NARCIS (Netherlands)

Spinhoven, Philip; Huijbers, Marloes J.; Zheng, Yixia; Ormel, Johan; Speckens, Anne E. M.

2017-01-01

Studies examining mindfulness in relation to personality traits have been mainly conducted in non-clinical samples and resulted in mixed findings. The present cross-sectional study examined which mindfulness facets are most strongly associated with Big Five personality domains and facets implicated

The value of SPECT bone scans in diagnosis of patients with zygapophseal joint pain

International Nuclear Information System (INIS)

Hu Jiajia; Liang Yu; Li Biao; Zhu Chengmo; Chen Gang; Wang Chao; Tian Weijia; Qu Liumin

2008-01-01

Objective: Bone scintigraphy with SPECT of the lumbar spine allows identification of lesions not seen with planar imaging, in patients with chronic low back pain. The aim of this study was to investigate the value of SPECT bone scans in diagnosis of patients with zygapophyseal joint pain. Methods: Thirty-five consecutive patients in Ruijin hospital from July 2006 to March 2007 with low back pain were en- rolled. All patients underwent bone scintigraphy with SPECT. According to the results of SPECT, patients with isotope-uptake joints received injections at the levels where abnormalities were identified on the scan. Patients with negative scans received other treatment (conservative treatment or surgery) but not facet joint injection. Clinical records were collected at 1-, 3-, and 6-month in SPECT-positive group after their initial treatment. And the SPECT-negative group were followed up at 6-month after therapy. Statistical analysis was performed with SPSS 10.0. Patients with SPECT-positive and -negative results were performed with the grouped t-test. Visual analog scales (VAS) were with the paired t-test used in patients with positive scans at before and after treatment. Results: Fifteen cases had facetal uptake of isotope on SPECT bone scans. After facet joint injection, 85.7% patients (12/14, 1 patient was excluded for operation) had improvement in pain score at 1-month, 78.6% (11/14) at 3-month, and 50.0% (7/14) at 6-month. Of 20 negative cases, 3 were treated by surgery and 17 by conservative treatment. All 20 cases were followed up for 6 months and 70.0% (14/20) had long time pain relief. Conclusion: SPECT bone scans are helpful to identify patients with low back pain who would benefit from facet joint injections. (authors)

A folk-psychological ranking of personality facets

Directory of Open Access Journals (Sweden)

Eka Roivainen

2016-10-01

Full Text Available Background Which personality facets should a general personality test measure? No consensus exists on the facet structure of personality, the nature of facets, or the correct method of identifying the most significant facets. However, it can be hypothesized (the lexical hypothesis that high frequency personality describing words more likely represent important personality facets and rarely used words refer to less significant aspects of personality. Participants and procedure A ranking of personality facets was performed by studying the frequency of the use of popular personality adjectives in causal clauses (because he is a kind person on the Internet and in books as attributes of the word person (kind person. Results In Study 1, the 40 most frequently used adjectives had a cumulative usage frequency equal to that of the rest of the 295 terms studied. When terms with a higher-ranking dictionary synonym or antonym were eliminated, 23 terms remained, which represent 23 different facets. In Study 2, clusters of synonymous terms were examined. Within the top 30 clusters, personality terms were used 855 times compared to 240 for the 70 lower-ranking clusters. Conclusions It is hypothesized that personality facets represented by the top-ranking terms and clusters of terms are important and impactful independent of their correlation with abstract underlying personality factors (five/six factor models. Compared to hierarchical personality models, lists of important facets probably better cover those aspects of personality that are situated between the five or six major domains.

FACET Emittance Growth

Energy Technology Data Exchange (ETDEWEB)

Frederico, J; Hogan, M.J.; Nosochkov, Y.; Litos, M.D.; Raubenheimer, T.; /SLAC

2011-04-05

FACET, the Facility for Advanced Accelerator and Experimental Tests, is a new facility being constructed in sector 20 of the SLAC linac primarily to study beam driven plasma wakefield acceleration. The FACET beamline consists of a chicane and final focus system to compress the 23 GeV, 3.2 nC electron bunches to {approx}20 {micro}m long and {approx}10 {micro}m wide. Simulations of the FACET beamline indicate the short-duration and large, 1.5% rms energy spread beams may suffer a factor of four emittance growth from a combination of chromaticity, incoherent synchrotron radiation (ISR), and coherent synchrotron radiation (CSR). Emittance growth is directly correlated to head erosion in plasma wakefield acceleration and is a limiting factor in single stage performance. Studies of the geometric, CSR, and ISR components are presented. Numerical calculation of the rms emittance can be overwhelmed by long tails in the simulated phase space distributions; more useful definitions of emittance are given. A complete simulation of the beamline is presented as well, which agrees with design specifications.

FACET Emittance Growth

International Nuclear Information System (INIS)

Frederico, Joel

2011-01-01

FACET, the Facility for Advanced Accelerator and Experimental Tests, is a new facility being constructed in sector 20 of the SLAC linac primarily to study beam driven plasma wakefield acceleration. The FACET beamline consists of a chicane and final focus system to compress the 23 GeV, 3.2 nC electron bunches to ∼20 (micro)m long and ∼10 (micro)m wide. Simulations of the FACET beamline indicate the short-duration and large, 1.5% rms energy spread beams may suffer a factor of four emittance growth from a combination of chromaticity, incoherent synchrotron radiation (ISR), and coherent synchrotron radiation (CSR). Emittance growth is directly correlated to head erosion in plasma wakefield acceleration and is a limiting factor in single stage performance. Studies of the geometric, CSR, and ISR components are presented. Numerical calculation of the rms emittance can be overwhelmed by long tails in the simulated phase space distributions; more useful definitions of emittance are given. A complete simulation of the beamline is presented as well, which agrees with design specifications.

Joint Polar Satellite System (JPSS) Common Ground System (CGS) Technical Performance Measures of the Block 2 Architecture

Science.gov (United States)

Grant, K. D.; Panas, M.

2016-12-01

NOAA and NASA are jointly acquiring the next-generation civilian weather satellite system: the Joint Polar Satellite System (JPSS). JPSS replaced the afternoon orbit component and ground processing of NOAA's old POES system. JPSS satellites carry sensors that collect meteorological, oceanographic, climatological, and solar-geophysical observations of the earth, atmosphere, and space. The ground processing system for JPSS is known as the JPSS Common Ground System (JPSS CGS). Developed and maintained by Raytheon Intelligence, Information and Services (IIS), the CGS is a globally distributed, multi-mission system serving NOAA, NASA and their national and international partners. The CGS has demonstrated its scalability and flexibility to incorporate multiple missions efficiently and with minimal cost, schedule and risk, while strengthening global partnerships in weather and environmental monitoring. The CGS architecture has been upgraded to Block 2.0 to satisfy several key objectives, including: "operationalizing" the first satellite, Suomi NPP, which originally was a risk reduction mission; leveraging lessons learned in multi-mission support, taking advantage of newer, more reliable and efficient technologies and satisfying constraints due of the continually evolving budgetary environment. To ensure the CGS meets these needs, we have developed 48 Technical Performance Measures (TPMs) across 9 categories: Data Availability, Data Latency, Operational Availability, Margin, Scalability, Situational Awareness, Transition (between environments and sites), WAN Efficiency, and Data Recovery Processing. This paper will provide an overview of the CGS Block 2.0 architecture, with particular focus on the 9 TPM categories listed above. We will describe how we ensure the deployed architecture meets these TPMs to satisfy our multi-mission objectives with the deployment of Block 2.0.

Bilateral locked facets in the thoracic spine

NARCIS (Netherlands)

M.H.A. Willems; Braakman, R. (Reinder); B. van Linge (Bert)

1984-01-01

textabstractTwo cases of traumatic bilateral locked facets in the thoracic spine are reported. Both patients had only minor neurological signs. They both made a full neurological recovery after surgical reduction of the locked facets. Bilateral locked facets are very uncommon in the thoracic spine.

FACET CLASSIFICATIONS OF E-LEARNING TOOLS

Directory of Open Access Journals (Sweden)

Olena Yu. Balalaieva

2013-12-01

Full Text Available The article deals with the classification of e-learning tools based on the facet method, which suggests the separation of the parallel set of objects into independent classification groups; at the same time it is not assumed rigid classification structure and pre-built finite groups classification groups are formed by a combination of values taken from the relevant facets. An attempt to systematize the existing classification of e-learning tools from the standpoint of classification theory is made for the first time. Modern Ukrainian and foreign facet classifications of e-learning tools are described; their positive and negative features compared to classifications based on a hierarchical method are analyzed. The original author's facet classification of e-learning tools is proposed.

Antero-medial approach to the wrist: anatomic basis and new application in cases of fracture of the lunate facet.

Science.gov (United States)

Uzel, A-P; Bulla, A; Laurent-Joye, M; Caix, P

2011-08-01

The Henry approach is the classical anterolateral surgical exposure of the volar aspect of the distal radius. This approach does not allow good access to the medial side of the volar distal radius (lunate facet) and the distal radio-ulnar joint, unless it is extended proximally, retracting the tendons and the median nerve medially, which can cause some trauma. The purpose of our study was to investigate the anatomic basis and to outline the advantages of the unusual anteromedial approach, reporting our experience in the treatment of 4 distal radius fractures, with a 90° or 180° twist of the lunate facet, and 10 wrist dissections on cadavers. The average follow-up was 68.8 months (range 18 to 115 months). In our series, this approach did not cause any nerve injuries or any sensory loss of the distal forearm and the palm. All the fractures of the lunate facet and of the radial styloid process healed. One patient with an ulnar styloid process fracture associated showed pseudarthrosis, but with no instability of the distal radio-ulnar joint or pain on the ulnar side. Using the criteria of Green and O'Brien, modified by Cooney, the results were: excellent in two cases, good in one case, and average in another. The evaluation of arthritis according to Knirk and Jupiter's classification showed grade 0 in three cases and grade 3 in one case with osteochondral sclerosis. We showed that the anteromedial approach is reliable and convenient in the case of fractures situated in the antero-medial portion of the radius, for the double objective of reducing the fracture under direct control and checking the congruence of the distal radio-ulnar joint.

Study on disposal method of graphite blocks and storage of spent fuel for modular gas-cooled reactor. Joint research

Energy Technology Data Exchange (ETDEWEB)

Sumita, Junya; Sawa, Kazuhiro; Kunitomi, Kazuhiko [Japan Atomic Energy Research Inst., Oarai, Ibaraki (Japan). Oarai Research Establishment; Tsuchie, Yasuo; Urakami, Masao [Japan Atomic Power Co., Tokyo (Japan)

2003-02-01

This report describes the result of study on disposal method of graphite blocks in future block-type reactor. Present study was carried out within a framework of joint research, ''Research of Modular High Temperature Gas-cooled Reactors (No. 3)'', between Japan Atomic Energy Research Institute (JAERI) and the Japan Atomic Power Company (JAPCO), in 2000. In this study, activities in fuel and reflector graphite blocks were evaluated and were compared with the disposal limits defined as low-level of radioactive waste. As a result, it was found that the activity for only C-14 was higher than disposal limits for the low-level of radioactive waste and that the amount of air in the graphite is important to evaluate precisely of C-14 activity. In addition, spent fuels can be stored in air-cooled condition at least after two years cooling in the storage pool. (author)

A faceted eye on intellectual giftedness: Examining the personality of gifted students using FFM domains and facets

Directory of Open Access Journals (Sweden)

Altaras-Dimitrijević Ana

2012-01-01

Full Text Available The study examines the personality profile of gifted vs. average-ability students from the perspective of the FFM. The issue was approached by (1 reviewing the literature for well-established personality characteristics of the gifted, (2 establishing correspondences between these traits and FFM domains/facets, and (3 formulating a domain and a facet-level model which were hypothesized to discriminate significantly between gifted and nongifted students. The domain-level model consisted of Openness and Agreeableness. The facet-level model included 14 traits: Anxiety, Impulsiveness, Gregariousness, Assertiveness, Fantasy, Feelings, Aesthetics, Ideas, Compliance, Modesty, Tendermindedness, Order, Achievement, and Deliberation. The models were tested on three samples (N1=515 high-school students, 155 gifted; N2=132 psychology students, 28 gifted; N3=443 psychology students, 91 gifted. Results indicate that the domain-level model does not discriminate significantly between gifted and nongifted students in each sample, whereas the proposed 14-facet model yields a significant discrimination across all samples. The latter model may be further adjusted by removing facets which proved inconsistent or unsubstantial in distinguishing between the two groups. This yields a 7-facet discriminant function, which is also significant across samples, indicating that gifted students are consistently distinguished by a combination of high Ideas, Fantasy, Aesthetics, and Assertiveness, but low Gregariuosness, Modesty, and Tendermindeness. Educational implications and limitations are discussed. [Projekat Ministarstva nauke Republike Srbije, br. 179018

The growth of faceted/nonfaceted eutectics

International Nuclear Information System (INIS)

Suchtelen, J. van

1976-01-01

This paper is concerned with the unidirectional solidification of eutectic melts in which one of the phases has a faceted, the other a nonfaceted solid-liquid interface. The occurrence of complex microstructures in such eutectics is explained as a growth phenomenon. The essential condition for the occurrence of such structures is a non-isothermal solid-liquid interface, developing into a faceted-cellular structure. The faceted shape of the cells is imposed by the faceted component of the eutectic. Breakdown to such a cellular structure occurs not only in constitutional-supercooling conditions, but under any circumstances, the cellular period being a function of growth velocity, temperature gradient etc. The two-phase morphology of the eutectic structure is discussed in terms of the relative magnitude of the periods of the cellular and of the eutectic structure. (orig.) [de

Proposal plan of classification faceted for federal universities

Directory of Open Access Journals (Sweden)

Renata Santos Brandão

2017-09-01

Full Text Available This study aims to present a faceted classification plan for the archival management of documents in the federal universities of Brazil. For this, was done a literature review on the archival management in Brazil, the types of classification plans and the theory of the Ranganathan faceted classification, through searches in databases in the areas of Librarianship and Archivology. It was identified the classification plan used in the Federal Institutions of Higher Education to represent the functional facet and created the structural classification plan to represent the structural facet. The two classification plans were inserted into a digital repository management system to give rise to the faceted classification plan. The system used was Tainacan, free software wordpress-based used in digital document management. The developed faceted classification plan allows the user to choose and even combine the way to look for the information that guarantees agreater efficiency in the information retrieval.

Work functions and surface charges at metallic facet edges

International Nuclear Information System (INIS)

Fall, C.J.; Binggeli, N.; Baldereschi, A.

2002-04-01

The electronic charge densities and work functions at sharp metallic facet edges are determined from ab initio calculations, combined with macroscopic averaging techniques. In particular, we examine how two different work functions coexist at close range near edges between inequivalent facets. The surface ionic relaxation at facet edges is shown to influence appreciably the local electrostatic potential in the vacuum. Various edges between Al(100) and Al(111) facets are studied, as well as between Na(110) facets. We also develop a model of electronic surface dipoles, which accounts for the surface charge transfer between inequivalent facets, and which allows us to predict the influence of the shape and size of a macroscopic crystal on its work functions. (author)

Scalable Faceted Ranking in Tagging Systems

Science.gov (United States)

Orlicki, José I.; Alvarez-Hamelin, J. Ignacio; Fierens, Pablo I.

Nowadays, web collaborative tagging systems which allow users to upload, comment on and recommend contents, are growing. Such systems can be represented as graphs where nodes correspond to users and tagged-links to recommendations. In this paper we analyze the problem of computing a ranking of users with respect to a facet described as a set of tags. A straightforward solution is to compute a PageRank-like algorithm on a facet-related graph, but it is not feasible for online computation. We propose an alternative: (i) a ranking for each tag is computed offline on the basis of tag-related subgraphs; (ii) a faceted order is generated online by merging rankings corresponding to all the tags in the facet. Based on the graph analysis of YouTube and Flickr, we show that step (i) is scalable. We also present efficient algorithms for step (ii), which are evaluated by comparing their results with two gold standards.

SLAC Linac Preparations for FACET

International Nuclear Information System (INIS)

Erickson, Roger

2011-01-01

The SLAC 3km linear electron accelerator has been cut at the two-thirds point to provide beams to two independent programs. The last third provides the electron beam for the Linac Coherent Light Source (LCLS), leaving the first two-thirds available for FACET, the new experimental facility for accelerator science and test beams. In this paper, we describe this separation and projects to prepare the linac for the FACET experimental program.

Framework Application for Core Edge Transport Simulation (FACETS)

Energy Technology Data Exchange (ETDEWEB)

Malony, Allen D; Shende, Sameer S; Huck, Kevin A; Mr. Alan Morris, and Mr. Wyatt Spear

2012-03-14

The goal of the FACETS project (Framework Application for Core-Edge Transport Simulations) was to provide a multiphysics, parallel framework application (FACETS) that will enable whole-device modeling for the U.S. fusion program, to provide the modeling infrastructure needed for ITER, the next step fusion confinement device. Through use of modern computational methods, including component technology and object oriented design, FACETS is able to switch from one model to another for a given aspect of the physics in a flexible manner. This enables use of simplified models for rapid turnaround or high-fidelity models that can take advantage of the largest supercomputer hardware. FACETS does so in a heterogeneous parallel context, where different parts of the application execute in parallel by utilizing task farming, domain decomposition, and/or pipelining as needed and applicable. ParaTools, Inc. was tasked with supporting the performance analysis and tuning of the FACETS components and framework in order to achieve the parallel scaling goals of the project. The TAU Performance System® was used for instrumentation, measurement, archiving, and profile / tracing analysis. ParaTools, Inc. also assisted in FACETS performance engineering efforts. Through the use of the TAU Performance System, ParaTools provided instrumentation, measurement, analysis and archival support for the FACETS project. Performance optimization of key components has yielded significant performance speedups. TAU was integrated into the FACETS build for both the full coupled application and the UEDGE component. The performance database provided archival storage of the performance regression testing data generated by the project, and helped to track improvements in the software development.

Preamble to marine microbiology: Facets and opportunities

Digital Repository Service at National Institute of Oceanography (India)

Ramaiah, N.

The book titled 'Marine Microbiology: Facets & Opportunities' is an attempt to bring together some facets of marine microbiology as have been made out by many contemporaries in particular from the tropical marine regions. There are 18 contributed...

Migration mechanisms of a faceted grain boundary

Science.gov (United States)

Hadian, R.; Grabowski, B.; Finnis, M. W.; Neugebauer, J.

2018-04-01

We report molecular dynamics simulations and their analysis for a mixed tilt and twist grain boundary vicinal to the Σ 7 symmetric tilt boundary of the type {1 2 3 } in aluminum. When minimized in energy at 0 K , a grain boundary of this type exhibits nanofacets that contain kinks. We observe that at higher temperatures of migration simulations, given extended annealing times, it is energetically favorable for these nanofacets to coalesce into a large terrace-facet structure. Therefore, we initiate the simulations from such a structure and study as a function of applied driving force and temperature how the boundary migrates. We find the migration of a faceted boundary can be described in terms of the flow of steps. The migration is dominated at lower driving force by the collective motion of the steps incorporated in the facet, and at higher driving forces by the step detachment from the terrace-facet junction and propagation of steps across the terraces. The velocity of steps on terraces is faster than their velocity when incorporated in the facet, and very much faster than the velocity of the facet profile itself, which is almost stationary. A simple kinetic Monte Carlo model matches the broad kinematic features revealed by the molecular dynamics. Since the mechanisms seem likely to be very general on kinked grain-boundary planes, the step-flow description is a promising approach to more quantitative modeling of general grain boundaries.

Cervical endplate and facet arthrosis: an anatomic study of cadaveric specimens.

Science.gov (United States)

Master, Daniel L; Toy, Jason O; Eubanks, Jason D; Ahn, Nicholas U

2012-10-01

An anatomic, epidemiologic study of cervical endplate and facet arthrosis in cadaveric spines. To determine the prevalence of cervical endplate and facet arthrosis and the relationship between these 2 entities in a large population sample. Cervical endplate and facet arthrosis are common radiographic findings, which have both been linked to pain. However, the prevalence and relationship between cervical endplate and facet arthrosis has not been clearly defined. The cervical vertebrae from 234 cadaveric spines were examined by a single investigator for evidence of endplate and facet arthrosis. Arthrosis at each endplate and facet was graded on a continuum from 0 to IV. Race, age at death, and sex of each specimen were also recorded. Stepwise multiple linear regression was used to analyze any association between race, age, sex, endplate arthrosis, and facet arthrosis. Factors with P values arthrosis severity scores among patients within the same decades of life. Concurrent cervical endplate and facet arthrosis was present in 77% of the study population. Stepwise multiple linear regression revealed significant (Parthrosis and between age and facet arthrosis. Race and sex did not correlate with facet arthrosis. In addition, patients in age groups 30 to 39, 40 to 49, 50 to 59, 60 to 69, 70 to 79, and 80 to 89 demonstrated more severe (Parthrosis in comparison with facet arthrosis. Concurrent cervical endplate and facet arthrosis is a common condition. Cervical endplate arthrosis and advancing age are associated with cervical facet arthrosis independent of race and sex. Cervical endplate arthrosis precedes facet arthrosis.

Analysis of movement axes of the ankle and subtalar joints: relationship with the articular surfaces of the talus.

Science.gov (United States)

Cho, Ho-Jung; Kwak, Dai-Soon; Kim, In-Beom

2014-10-01

Bone shape varies among human populations, and in the case of articular joints, the shape of the articulating surfaces strongly influences joint movement. In this study, we aimed to analyse the axes of the talocrural and subtalar joints, using the talar articular surface method, and compare these results with those of the previous studies. We used three-dimensional reconstruction models of tali among Korean individuals. The axes of the talocrural and subtalar joints were calculated by using the least-square sphere fitting method, and the principal axis was used for reference coordination. The shape of the talus was classified based on the shape of its anterior, middle, and posterior calcaneal facets, and the talar shape was compared with the movement axes. The movement axes did not differ according to the type of calcaneal facets of the talus. Interestingly, we also noted that the axes of the talocrural and subtalar joints in this study differed significantly from those reported in the previous studies; these differences may be due to variations in the shape of the bones. © IMechE 2014.

Concurrent, parallel, multiphysics coupling in the FACETS project

Energy Technology Data Exchange (ETDEWEB)

Cary, J R; Carlsson, J A; Hakim, A H; Kruger, S E; Miah, M; Pletzer, A; Shasharina, S [Tech-X Corporation, 5621 Arapahoe Avenue, Suite A, Boulder, CO 80303 (United States); Candy, J; Groebner, R J [General Atomics (United States); Cobb, J; Fahey, M R [Oak Ridge National Laboratory (United States); Cohen, R H; Epperly, T [Lawrence Livermore National Laboratory (United States); Estep, D J [Colorado State University (United States); Krasheninnikov, S [University of California at San Diego (United States); Malony, A D [ParaTools, Inc (United States); McCune, D C [Princeton Plasma Physics Laboratory (United States); McInnes, L; Balay, S [Argonne National Laboratory (United States); Pankin, A, E-mail: cary@txcorp.co [Lehigh University (United States)

2009-07-01

FACETS (Framework Application for Core-Edge Transport Simulations), is now in its third year. The FACETS team has developed a framework for concurrent coupling of parallel computational physics for use on Leadership Class Facilities (LCFs). In the course of the last year, FACETS has tackled many of the difficult problems of moving to parallel, integrated modeling by developing algorithms for coupled systems, extracting legacy applications as components, modifying them to run on LCFs, and improving the performance of all components. The development of FACETS abides by rigorous engineering standards, including cross platform build and test systems, with the latter covering regression, performance, and visualization. In addition, FACETS has demonstrated the ability to incorporate full turbulence computations for the highest fidelity transport computations. Early indications are that the framework, using such computations, scales to multiple tens of thousands of processors. These accomplishments were a result of an interdisciplinary collaboration among computational physics, computer scientists and applied mathematicians on the team.

Cervical facet oedema: prevalence, correlation to symptoms, and follow-up imaging

International Nuclear Information System (INIS)

Nevalainen, M.T.; Foran, P.J.; Roedl, J.B.; Zoga, A.C.; Morrison, W.B.

2016-01-01

Aim: To evaluate the prevalence of cervical facet oedema in patients referred for magnetic resonance imaging (MRI) to investigate neck pain and/or radiculopathy, and to investigate whether there is a correlation between the presence of oedema and patients' symptoms. Materials and methods: A retrospective report review of 1885 patients undergoing cervical spine MRI between July 2008 and June 2015 was performed. Exclusion criteria included acute trauma, surgery, neoplastic disease, or infection in the cervical spine. One hundred and seventy-three MRI studies with cervical facet oedema were evaluated by each of the two radiologists. In these patients, the grade of bone marrow oedema (BMO) and corresponding neuroforaminal narrowing at the cervical facets was assessed. Correlation with symptoms was performed based on pre-MRI questionnaire. Results: The prevalence of cervical facet oedema was 9%; the most commonly affected levels were C3–4, C4–5, and C2–3. A total of 202 cervical facets were evaluated: mild BMO was seen in 35%, moderate in 41%, and severe in 24% of cases. Surrounding soft-tissue oedema was observed in 36%, 69%, and 92% of the BMO grades, respectively. The correlations between unilateral radiculopathy and ipsilateral facet BMO grades were 79%, 83%, and 73% (chi-square, p<0.001), respectively. Furthermore, neuroforaminal narrowing on the corresponding level was found in 35%, 38%, and 11% of cases, respectively. At follow-up imaging, facet oedema was most likely to remain unchanged or to decrease. Conclusion: The prevalence of cervical facet oedema is 9%. Cervical facet oedema is associated with ipsilateral radiculopathy. Neuroforaminal narrowing, however, is not associated with facet oedema. - Highlights: • Association between the cervical facet oedema and cervical radiculopathy was studied. • Prevalence of the cervical facet oedema was 9%. • Facet oedema was associated with radiculopathy regardless of the degree of oedema. • Neuroforaminal

Eight Key Facets of Small Business Management.

Science.gov (United States)

Scott, James Calvert

1980-01-01

Identifies eight key facets of small business management and suggests activities that may be used to assist in their development. The key facets are (1) product or service, (2) competition, (3) marketing strategies, (4) personnel needs, (5) equipment and facility needs, (6) finances, (7) planning, and (8) entrepreneurship. (JOW)

Future ATM Concepts Evaluation Tool (FACET) Interface Control Document

Science.gov (United States)

Grabbe, Shon R.

2017-01-01

This Interface Control Document (ICD) documents the airspace adaptation and air traffic inputs of NASA's Future ATM Concepts and Evaluation Tool (FACET). Its intended audience is the project manager, project team, development team, and stakeholders interested in interfacing with the system. FACET equips Air Traffic Management (ATM) researchers and service providers with a way to explore, develop and evaluate advanced air transportation concepts before they are field-tested and eventually deployed. FACET is a flexible software tool that is capable of quickly generating and analyzing thousands of aircraft trajectories. It provides researchers with a simulation environment for preliminary testing of advanced ATM concepts. Using aircraft performance profiles, airspace models, weather data, and flight schedules, the tool models trajectories for the climb, cruise, and descent phases of flight for each type of aircraft. An advanced graphical interface displays traffic patterns in two and three dimensions, under various current and projected conditions for specific airspace regions or over the entire continental United States. The system is able to simulate a full day's dynamic national airspace system (NAS) operations, model system uncertainty, measure the impact of different decision-makers in the NAS, and provide analysis of the results in graphical form, including sector, airport, fix, and airway usage statistics. NASA researchers test and analyze the system-wide impact of new traffic flow management algorithms under anticipated air traffic growth projections on the nation's air traffic system. In addition to modeling the airspace system for NASA research, FACET has also successfully transitioned into a valuable tool for operational use. Federal Aviation Administration (FAA) traffic flow managers and commercial airline dispatchers have used FACET technology for real-time operations planning. FACET integrates live air traffic data from FAA radar systems and weather data

Lumbar facet anatomy changes in spondylolysis: a comparative skeletal study

Science.gov (United States)

Dar, Gali; Peleg, Smadar; Steinberg, Nili; Alperovitch-Najenson, Dvora; Salame, Khalil; Hershkovitz, Israel

2007-01-01

Opinions differ as to the exact mechanism responsible for spondylolysis (SP) and whether individuals with specific morphological characteristics of the lumbar vertebral neural arch are predisposed to SP. The aim of our study was to reveal the association between SP and the architecture of lumbar articular facets and the inter-facet region. Methods: Using a Microscribe three-dimensional apparatus (Immersion Co., San Jose, CA, USA), length, width and depth of all articular facets and all inter-facet distances in the lumbar spine (L1–L5) were measured. From the Hamann-Todd Human Osteological Collection (Cleveland Museum of Natural History, OH, USA) 120 normal male skeletons with lumbar spines in the control group and 115 with bilateral SP at L5 were selected. Analysis of variance was employed to examine the differences between spondylolytic and normal spines. Results: Three profound differences between SP and the norm appeared: (1) in individuals with SP, the size and shape of L4’s neural arch had significantly greater inter-facet widths, significantly shorter inter-facet heights and significantly shorter and narrower articular facets; (2) only in the L4 vertebra in individuals with SP was the inferior inter-facet width greater in size than the superior inter-facet width of the vertebra below (L5) (38.7 mm versus 40 mm); (3) in all lumbar vertebrae, the right inferior articular facets in individuals with SP were flatter compared to the control group. Conclusions: Individuals with L4 “SP” characteristics are at a greater risk of developing fatigue fractures in the form of spondylolysis at L5. PMID:17440753

30 CFR 36.24 - Engine joints.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Engine joints. 36.24 Section 36.24 Mineral... Construction and Design Requirements § 36.24 Engine joints. (a) Cylinder head. The joint between the cylinder head and block of the engine shall be fitted with a metal or metal-clad gasket satisfactory to MSHA...

Minimally invasive arthrodesis for chronic sacroiliac joint dysfunction using the SImmetry SI Joint Fusion system

Directory of Open Access Journals (Sweden)

Miller LE

2014-05-01

Full Text Available Larry E Miller,1,2 Jon E Block21Miller Scientific Consulting, Inc., Asheville, NC, USA; 2The Jon Block Group, San Francisco, CA, USA Abstract: Chronic sacroiliac (SI joint-related low back pain (LBP is a common, yet under-diagnosed and undertreated condition due to difficulties in accurate diagnosis and highly variable treatment practices. In patients with debilitating SI-related LBP for at least 6 months duration who have failed conservative management, arthrodesis is a viable option. The SImmetry® SI Joint Fusion System is a novel therapy for SI joint fusion, not just fixation, which utilizes a minimally invasive surgical approach, instrumented fixation for immediate stability, and joint preparation with bone grafting for a secure construct in the long term. The purpose of this report is to describe the minimally invasive SI Joint Fusion System, including patient selection criteria, implant characteristics, surgical technique, postoperative recovery, and biomechanical testing results. Advantages and limitations of this system will be discussed. Keywords: arthrodesis, fusion, minimally invasive, sacroiliac, SImmetry

Hemorrhagic lumbar facet cysts accompanying a spinal subdural hematoma at the same level.

Science.gov (United States)

Ikeda, Osamu; Minami, Norihiko; Yamazaki, Masashi; Koda, Masao; Morinaga, Tatsuo

2015-03-01

We present a rare and interesting case of hemorrhagic lumbar facet cysts accompanying a spinal subdural hematoma at the same level suggesting a possible mechanism by which spinal subdural hematomas can arise. A 71-year-old man presented with persistent sciatic pain and intermittent claudication. Magnetic resonance imaging demonstrated a multilocular mass lesion that showed high signal intensity in both T1- and T2-weighted images, and was located both inside and outside of the spinal canal. Computed tomographic myelography showed a cap-shaped block of the dural tube at L5 and computed tomography with L5-S facet arthrography demonstrated cystic masses. The patient was diagnosed with lumbar radiculopathy caused by hemorrhagic facet cysts, and then progressed to surgical treatment. Surgery revealed that the cysts contained blood clots, and intraoperative findings that the inside of the dural tube appeared blackish and that the dural tube was tensely ballooned after removal of the cysts led us to explorative durotomy. The durotomy demonstrated concentrated old blood pooling both in the dorsal and ventral subdural space, and these spaces were subsequently drained. After surgery, his sciatic pain and intermittent claudication resolved. There was no evidence of cyst mass recurrence at 2 years of follow-up. We propose a newly described mechanism for the formation of spinal subdural hematomas. We recommend surgeons be alert to epidural lesions causing repeated acute compression of the dural tube, which can cause spinal subdural hematoma, and consider the possible coexistence of these lesions in diagnosis and strategic surgical decisions.

Design and construction of a block test in closely jointed rock

International Nuclear Information System (INIS)

Black, M.T.; Cramer, M.L.

1983-06-01

The Basalt Waste Isolation Project developed a large-scale block test to investigate the in-situ deformational response of a basalt rock mass. The test was designed and installed into the vertical rib (wall) of a tunnel to examine the response of basalt both in a parallel and perpendicular mode to the basalt columns. The salient challenge confronting the design and development of the test was a lack of documented experience for testing into a vertical wall. Information was available for testing in a horizontal surface. The major tasks involved in the implementation of this test included flat-jack slot drilling, instrumentation hole drilling, cable anchor hole drilling, flat-jack installation, monitoring instrumentation installation, and cable anchor installation. Drilling in the closely jointed and fractured rock mass required extreme care to prevent unraveling of the columnar structure and to minimize the disturbance of the section to be tested. The adaptation of a high-strength cable anchor system to the space limitations of the test configuration and the design and implementation of an optical deformation monitoring device capable of achieving a measurement precision of 30 μm required equal innovation. Construction of the test facility was successfully completed on schedule in approx. 25 wk

Acromioclavicular joint separation

Directory of Open Access Journals (Sweden)

Devan Pandya, BS

2018-04-01

Full Text Available History of present illness: A 30-year-old male was brought in by ambulance to the emergency department as a trauma activation after a motorcycle accident. The patient was the helmeted rider of a motorcycle traveling at an unknown speed when he lost control and was thrown off his vehicle. He denied loss of consciousness, nausea, or vomiting. The patient’s vital signs were stable and his only complaint was pain around his left shoulder. On exam, the patient had a prominent left clavicle without skin compromise. He had adequate range of motion in the left shoulder with moderate pain, and his left upper extremity was neurovascularly intact. Significant findings: Plain films of the left shoulder showed elevation of the left clavicle above the acromion. There was an increase in the acromioclavicular (AC and coracoclavicular (CC distances (increased joint distances marked with red and blue arrows, respectively. A normal AC joint measures 1-3 mm whereas a normal CC distance measures 11-13 mm.1 The injury was classified as a Rockwood type III AC joint separation. Discussion: The AC joint is a synovial joint between an oval facet on the acromion and a similar facet on the distal end of the clavicle. Horizontal stability is provided by the AC joint while axial stability is provided by the CC joint.2,3 AC joint injuries account for about 9%-12% of shoulder girdle injuries, and the most common mechanism is direct trauma.4,5 Initial evaluation with imaging includes plain films with three views: the anterior-posterior (AP view with the shoulder in internal and external rotation as well as an axillary, or scapula-Y view (sensitivity 40%, specificity 90% for all films.6,7 AC joint injuries are classified by the Rockwood system.8 Type I involves a sprain or incomplete tear of the AC ligaments with an intact CC ligament. The AC joint appears normal on X-ray, but can become widened with stress, achieved by having the patient hold a 10-15 pound weight from each

Utilization and growth patterns of sacroiliac joint injections from 2000 to 2011 in the medicare population.

Science.gov (United States)

Manchikanti, Laxmaiah; Hansen, Hans; Pampati, Vidyasagar; Falco, Frank J E

2013-01-01

  The high prevalence of persistent low back pain and growing number of diagnostic and therapeutic modalities employed to manage chronic low back pain and the subsequent impact on society and the economy continue to hold sway over health care policy. Among the multiple causes responsible for chronic low back pain, the contributions of the sacroiliac joint have been a subject of debate albeit a paucity of research. At present, there are no definitive conservative, interventional or surgical management options for managing sacroiliac joint pain. It has been shown that the increases were highest for facet joint interventions and sacroiliac joint blocks with an increase of 310% per 100,000 Medicare beneficiaries from 2000 to 2011. There has not been a systematic assessment of the utilization and growth patterns of sacroiliac joint injections. Analysis of the growth patterns of sacroiliac joint injections in Medicare beneficiaries from 2000 to 2011. To evaluate the utilization and growth patterns of sacroiliac joint injections. This assessment was performed utilizing Centers for Medicare and Medicaid Services (CMS) Physician/Supplier Procedure Summary (PSPS) Master data from 2000 to 2011. The findings of this assessment in Medicare beneficiaries from 2000 to 2011 showed a 331% increase per 100,000 Medicare beneficiaries with an annual increase of 14.2%, compared to an increase in the Medicare population of 23% or annual increase of 1.9%. The number of procedures increased from 49,554 in 2000 to 252,654 in 2011, or a rate of 125 to 539 per 100,000 Medicare beneficiaries. Among the various specialists performing sacroiliac joint injections, physicians specializing in physical medicine and rehabilitation have shown the most increase, followed by neurology with 1,568% and 698%, even though many physicians from both specialties have been enrolling in interventional pain management and pain management. Even though the numbers were small for nonphysician providers including

Subtalar joint stress imaging with tomosynthesis.

Science.gov (United States)

Teramoto, Atsushi; Watanabe, Kota; Takashima, Hiroyuki; Yamashita, Toshihiko

2014-06-01

The purpose of this study was to perform stress imaging of hindfoot inversion and eversion using tomosynthesis and to assess the subtalar joint range of motion (ROM) of healthy subjects. The subjects were 15 healthy volunteers with a mean age of 29.1 years. Coronal tomosynthesis stress imaging of the subtalar joint was performed in a total of 30 left and right ankles. A Telos stress device was used for the stress load, and the load was 150 N for both inversion and eversion. Tomographic images in which the posterior talocalcaneal joint could be confirmed on the neutral position images were used in measurements. The angle of the intersection formed by a line through the lateral articular facet of the posterior talocalcaneal joint and a line through the surface of the trochlea of the talus was measured. The mean change in the angle of the calcaneus with respect to the talus was 10.3 ± 4.8° with inversion stress and 5.0 ± 3.8° with eversion stress from the neutral position. The result was a clearer depiction of the subtalar joint, and inversion and eversion ROM of the subtalar joint was shown to be about 15° in healthy subjects. Diagnostic, Level IV.

Transverse morphology of the sacroiliac joint: effect of angulation and implications for fluoroscopically guided sacroiliac joint injection

International Nuclear Information System (INIS)

Ling, B.C.; Lee, J.W.; Man, H.S.J.; Grace, M.G.A.; Lambert, R.G.W.; Jhangri, G.S.

2006-01-01

Effects of angulation of computed tomography (CT) reconstruction plane on sacroiliac (SI) joint morphology were studied, and factors influencing the approach to fluoroscopically guided SI joint injection were assessed. CT scans of pelvises were reformatted on 41 subjects, aged 51.7 (±15.1) years. Transverse images were reconstructed at the caudal 3 cm of the SI joint tilting plane of reconstruction from -30 to +30 at 15 increments. Anteroposterior diameter of joint (depth), angle from sagittal plane (orientation angle), and distance from skin were measured. Joint contour was classified, and presence of bone blocking access to the joint was recorded. Comparison between angles were analysed by t-test. Relationships between variables were assessed by a Pearson correlation test. Depth was shorter with angulation in the inferior direction (P<0.01). Orientation angle increased with superior angulation (P<0.01). Distance from skin increased (P<0.01) with angulation in either direction. Joint contour was significantly different from baseline at each angle (P<0.001) but highly variable. Inferior angulation resulted in interposition of ilium between skin and SI joint, and superior angulation caused bone block due to the lower sacrum. None of these features was identified without tilting of the reconstruction plane, and effects were more pronounced with steeper angulation

Transverse morphology of the sacroiliac joint: effect of angulation and implications for fluoroscopically guided sacroiliac joint injection

Energy Technology Data Exchange (ETDEWEB)

Ling, B.C.; Lee, J.W.; Man, H.S.J.; Grace, M.G.A.; Lambert, R.G.W. [Department of Radiology and Diagnostic Imaging, University of Alberta Hospital, Edmonton (Canada); Jhangri, G.S. [Department of Public Health Sciences, University of Alberta Hospital, Edmonton (Canada)

2006-11-15

Effects of angulation of computed tomography (CT) reconstruction plane on sacroiliac (SI) joint morphology were studied, and factors influencing the approach to fluoroscopically guided SI joint injection were assessed. CT scans of pelvises were reformatted on 41 subjects, aged 51.7 ({+-}15.1) years. Transverse images were reconstructed at the caudal 3 cm of the SI joint tilting plane of reconstruction from -30 to +30 at 15 increments. Anteroposterior diameter of joint (depth), angle from sagittal plane (orientation angle), and distance from skin were measured. Joint contour was classified, and presence of bone blocking access to the joint was recorded. Comparison between angles were analysed by t-test. Relationships between variables were assessed by a Pearson correlation test. Depth was shorter with angulation in the inferior direction (P<0.01). Orientation angle increased with superior angulation (P<0.01). Distance from skin increased (P<0.01) with angulation in either direction. Joint contour was significantly different from baseline at each angle (P<0.001) but highly variable. Inferior angulation resulted in interposition of ilium between skin and SI joint, and superior angulation caused bone block due to the lower sacrum. None of these features was identified without tilting of the reconstruction plane, and effects were more pronounced with steeper angulation.

Prolonged knee pain relief by saphenous block (new technique

Directory of Open Access Journals (Sweden)

Rajeev Harshe

2013-01-01

Full Text Available Pain in the knee joint can be from a variety of reasons. It can be either from the joint itself, it can be myofascial or it can be neuropathy, radicular pain. The myofascial component can be in different forms, namely, collateral ligament pain, bursitis, tendinitis, and so on. This responds well to local injections of steroids. Pain from the joint can be because of osteoarthritis (OA, rheumatoid arthritis or any other variety of arthritis. Among these osteoarthritis is the most common and naturally occurring pain. There are several modalities used for managing pain in the knee joint. They include medicines and physiotherapy, intra-articular steroid injection, intra-articular Hyalgan, Synvisc injection, prolotherapy, genicular nerve block, ablation, intra-articular pulsed radio frequency (PRF ablation, acupuncture, injection of platelet-rich plasma in the joint, total knee replacement, high tibial osteotomy, arthroscopy and lavage, and so on. All these modalities have their pros and cons. Literature and experience state that the pain relief provided may last for a few months with these modalities except in surgical interventions in advanced OA. The saphenous nerve is termination of femoral nerve and it is essentially sensory nerve. It supplies the medial compartment and some part of the anterior compartment of the knee joint. This nerve has been blocked near the knee joint by way of infiltration by surgeons and anesthetists, for relief of pain after knee surgery, with varying pain relief of postoperative pain. When we block the saphenous in the mid thigh in the sartorial canal, the fluid tends to block the medial branch of the anterior femoral cutaneous nerve also. It is hypothesized that this may give complete medial and anterior knee pain relief and as most of the knee OA patients have medial and anterior knee pain, this may prove useful. Use of ultrasonography helps to locate the nerve better, ensuring perfection. An effort has been made to

Thermal contact resistance measurement of conduction cooled binary current lead joint block in cryocooler based self field I-V characterization facility

Energy Technology Data Exchange (ETDEWEB)

Kundu, Ananya, E-mail: ananya@ipr.res.in; Das, Subrat Kumar; Agarwal, Anees Bano Pooja; Pradhan, Subrata [Institute for Plasma Research, Bhat, Gandhinagar, Gujarat 382428 (India)

2016-05-23

In the present study thermal resistance of conduction cooled current lead joint block employing two different interfacial material namely AlN sheet and Kapton Film have been studied in the temperature range 5K-35K. In each case, the performance of different interlayer materials e.g. Indium foil for moderately pressurized contacts (contact pressure <1 MPa), and Apiezon N Grease, GE varnish for low pressurized contact (contact pressure <1 MPa) is studied. The performances of AlN joint with Indium foil and with Apeizon N Grease are studied and it is observed that the contact resistance reduces more with indium foil as compared to greased contact. The contact resistance measurements of Kapton film with Apiezon N grease and with GE varnish were also carried out in the same temperature range. A comparative study of AlN joint with Indium foil and Kapton with GE varnish as filler material is carried out to demonstrate better candidate material among Kapton and AlN for a particular filler material in the same temperature range.

Diaphragm-Sparing Nerve Blocks for Shoulder Surgery.

Science.gov (United States)

Tran, De Q H; Elgueta, Maria Francisca; Aliste, Julian; Finlayson, Roderick J

Shoulder surgery can result in significant postoperative pain. Interscalene brachial plexus blocks (ISBs) constitute the current criterion standard for analgesia but may be contraindicated in patients with pulmonary pathology due to the inherent risk of phrenic nerve block and symptomatic hemidiaphragmatic paralysis. Although ultrasound-guided ISB with small volumes (5 mL), dilute local anesthetic (LA) concentrations, and LA injection 4 mm lateral to the brachial plexus have been shown to reduce the risk of phrenic nerve block, no single intervention can decrease its incidence below 20%. Ultrasound-guided supraclavicular blocks with LA injection posterolateral to the brachial plexus may anesthetize the shoulder without incidental diaphragmatic dysfunction, but further confirmatory trials are required. Ultrasound-guided C7 root blocks also seem to offer an attractive, diaphragm-sparing alternative to ISB. However, additional large-scale studies are needed to confirm their efficacy and to quantify the risk of periforaminal vascular breach. Combined axillary-suprascapular nerve blocks may provide adequate postoperative analgesia for minor shoulder surgery but do not compare favorably to ISB for major surgical procedures. One intriguing solution lies in the combined use of infraclavicular brachial plexus blocks and suprascapular nerve blocks. Theoretically, the infraclavicular approach targets the posterior and lateral cords, thus anesthetizing the axillary nerve (which supplies the anterior and posterior shoulder joint), as well as the subscapular and lateral pectoral nerves (both of which supply the anterior shoulder joint), whereas the suprascapular nerve block anesthetizes the posterior shoulder. Future randomized trials are required to validate the efficacy of combined infraclavicular-suprascapular blocks for shoulder surgery.

Effect of Calcaneus Fracture Gap Without Step-Off on Stress Distribution Across the Subtalar Joint.

Science.gov (United States)

Barrick, Brett; Joyce, Donald A; Werner, Frederick W; Iannolo, Maria

2017-03-01

Subtalar arthritis is a common consequence following calcaneal fracture, and its development is related to the severity of the fracture. Previous calcaneal fracture models have demonstrated altered contact characteristics when a step-off is created in the posterior facet articular surface. Changes in posterior facet contact characteristics have not been previously characterized for calcaneal fracture gap without step-off. The contact characteristics (peak pressure, area of contact, and centroid of pressure) of the posterior facet of the subtalar joint were determined in 6 cadaveric specimens. After creating a calcaneal fracture to simulate a Sanders type II fracture, the contact characteristics were determined with the posterior facet anatomically reduced followed by an incremental increase in fracture gap displacement of 2, 3, and 5 mm without a step-off of the articular surface. Peak pressure on the medial fragment was significantly less with a 5-mm gap compared to a 2- or 3-mm gap, or reduced. On the lateral fragment, the peak pressure was significantly increased with a 5-mm gap compared to a 2- or 3-mm gap. Contact area significantly changed with increased gap. In this study, there were no significant differences in contact characteristics between a <3-mm gap and an anatomically reduced fracture, conceding the study limitations including limiting axial loading to 50% of donor body weight. A small amount of articular incongruity without a step-off can be tolerated by the subtalar joint, in contrast to articular incongruity with a step-off present.

Facets of job satisfaction of dental practitioners working in different organisational settings in England.

Science.gov (United States)

Harris, R V; Ashcroft, A; Burnside, G; Dancer, J M; Smith, D; Grieveson, B

2008-01-12

Before April 2006, English dentists were either working as an NHS general dental service (GDS) practitioner (fee-per-item, no local contractual obligations); an NHS personal dental service (PDS) practitioner (block contract with the primary care trust (PCT)); a private practitioner (either fee-per-item or capitation-based, independent of the PCT); or in a situation where they were mixing their NHS work (either under the GDS or PDS arrangements) with private work. To a) investigate the extent of the mix of NHS and private work in English dentists working in the GDS and PDS, b) to compare global job satisfaction, and c) to compare facets of job satisfaction for practitioners working in the different organisational settings of PDS practices, GDS practices and practices where there is a mix of NHS and private provision. Method A questionnaire was sent to 684 practitioners, containing 83 attitudinal statements relating to job facets, a global job satisfaction score and questions concerning workload. Response rate was 65.2%. More PDS than GDS dentists were found to treat the majority of their patients under the NHS. GDS dentists working fully in the NHS were least likely to be satisfied with their job, followed by PDS practitioners and then GDS dentists working in mixed NHS/private practices. Private practitioners were the most satisfied. Differences between GDS, PDS and private practitioners were found in global job satisfaction and in the facets of job satisfaction related to restriction in being able to provide quality care, control of work and developing clinical skills.

Large conservation gains possible for global biodiversity facets

Science.gov (United States)

Pollock, Laura J.; Thuiller, Wilfried; Jetz, Walter

2017-06-01

Different facets of biodiversity other than species numbers are increasingly appreciated as critical for maintaining the function of ecosystems and their services to humans. While new international policy and assessment processes such as the Intergovernmental Science-Policy Platform on Biodiversity and Ecosystem Services (IPBES) recognize the importance of an increasingly global, quantitative and comprehensive approach to biodiversity protection, most insights are still focused on a single facet of biodiversity—species. Here we broaden the focus and provide an evaluation of how much of the world’s species, functional and phylogenetic diversity of birds and mammals is currently protected and the scope for improvement. We show that the large existing gaps in the coverage for each facet of diversity could be remedied by a slight expansion of protected areas: an additional 5% of the land has the potential to more than triple the protected range of species or phylogenetic or functional units. Further, the same areas are often priorities for multiple diversity facets and for both taxa. However, we find that the choice of conservation strategy has a fundamental effect on outcomes. It is more difficult (that is, requires more land) to maximize basic representation of the global biodiversity pool than to maximize local diversity. Overall, species and phylogenetic priorities are more similar to each other than they are to functional priorities, and priorities for the different bird biodiversity facets are more similar than those of mammals. Our work shows that large gains in biodiversity protection are possible, while also highlighting the need to explicitly link desired conservation objectives and biodiversity metrics. We provide a framework and quantitative tools to advance these goals for multi-faceted biodiversity conservation.

Large conservation gains possible for global biodiversity facets.

Science.gov (United States)

Pollock, Laura J; Thuiller, Wilfried; Jetz, Walter

2017-06-01

Different facets of biodiversity other than species numbers are increasingly appreciated as critical for maintaining the function of ecosystems and their services to humans. While new international policy and assessment processes such as the Intergovernmental Science-Policy Platform on Biodiversity and Ecosystem Services (IPBES) recognize the importance of an increasingly global, quantitative and comprehensive approach to biodiversity protection, most insights are still focused on a single facet of biodiversity-species. Here we broaden the focus and provide an evaluation of how much of the world's species, functional and phylogenetic diversity of birds and mammals is currently protected and the scope for improvement. We show that the large existing gaps in the coverage for each facet of diversity could be remedied by a slight expansion of protected areas: an additional 5% of the land has the potential to more than triple the protected range of species or phylogenetic or functional units. Further, the same areas are often priorities for multiple diversity facets and for both taxa. However, we find that the choice of conservation strategy has a fundamental effect on outcomes. It is more difficult (that is, requires more land) to maximize basic representation of the global biodiversity pool than to maximize local diversity. Overall, species and phylogenetic priorities are more similar to each other than they are to functional priorities, and priorities for the different bird biodiversity facets are more similar than those of mammals. Our work shows that large gains in biodiversity protection are possible, while also highlighting the need to explicitly link desired conservation objectives and biodiversity metrics. We provide a framework and quantitative tools to advance these goals for multi-faceted biodiversity conservation.

Block volume estimation from the discontinuity spacing measurements of mesozoic limestone quarries, Karaburun Peninsula, Turkey.

Science.gov (United States)

Elci, Hakan; Turk, Necdet

2014-01-01

Block volumes are generally estimated by analyzing the discontinuity spacing measurements obtained either from the scan lines placed over the rock exposures or the borehole cores. Discontinuity spacing measurements made at the Mesozoic limestone quarries in Karaburun Peninsula were used to estimate the average block volumes that could be produced from them using the suggested methods in the literature. The Block Quality Designation (BQD) ratio method proposed by the authors has been found to have given in the same order of the rock block volume to the volumetric joint count (J(v)) method. Moreover, dimensions of the 2378 blocks produced between the years of 2009 and 2011 in the working quarries have been recorded. Assuming, that each block surfaces is a discontinuity, the mean block volume (V(b)), the mean volumetric joint count (J(vb)) and the mean block shape factor of the blocks are determined and compared with the estimated mean in situ block volumes (V(in)) and volumetric joint count (J(vi)) values estimated from the in situ discontinuity measurements. The established relations are presented as a chart to be used in practice for estimating the mean volume of blocks that can be obtained from a quarry site by analyzing the rock mass discontinuity spacing measurements.

Block Volume Estimation from the Discontinuity Spacing Measurements of Mesozoic Limestone Quarries, Karaburun Peninsula, Turkey

Directory of Open Access Journals (Sweden)

Hakan Elci

2014-01-01

Full Text Available Block volumes are generally estimated by analyzing the discontinuity spacing measurements obtained either from the scan lines placed over the rock exposures or the borehole cores. Discontinuity spacing measurements made at the Mesozoic limestone quarries in Karaburun Peninsula were used to estimate the average block volumes that could be produced from them using the suggested methods in the literature. The Block Quality Designation (BQD ratio method proposed by the authors has been found to have given in the same order of the rock block volume to the volumetric joint count (Jv method. Moreover, dimensions of the 2378 blocks produced between the years of 2009 and 2011 in the working quarries have been recorded. Assuming, that each block surfaces is a discontinuity, the mean block volume (Vb, the mean volumetric joint count (Jvb and the mean block shape factor of the blocks are determined and compared with the estimated mean in situ block volumes (Vin and volumetric joint count (Jvi values estimated from the in situ discontinuity measurements. The established relations are presented as a chart to be used in practice for estimating the mean volume of blocks that can be obtained from a quarry site by analyzing the rock mass discontinuity spacing measurements.

Impact of Project Leadership Facets on Project Outcome

Directory of Open Access Journals (Sweden)

Arslan Ayub

2015-08-01

Full Text Available The study analyzes the role of project leadership facets on effective project outcome. Numerous such initiatives have already been taken on project outcome/performance in the context of apposite leadership styles or project management. However, the current study is unique in the milieu of project outcome that it introduces a new leadership approach, which throws light on the significance of variant leadership facets on project outcome. The study uses explanatory approach; primary data is collected from project management professionals working in different project organizations. The study uses structural equation model (SEM technique to test the hypothesis. The study found a positive relationship between project leadership facets and project outcome.

Effect of Radiofrequency Denervation on Pain Intensity Among Patients With Chronic Low Back Pain: The Mint Randomized Clinical Trials.

Science.gov (United States)

Juch, Johan N S; Maas, Esther T; Ostelo, Raymond W J G; Groeneweg, J George; Kallewaard, Jan-Willem; Koes, Bart W; Verhagen, Arianne P; van Dongen, Johanna M; Huygen, Frank J P M; van Tulder, Maurits W

2017-07-04

Radiofrequency denervation is a commonly used treatment for chronic low back pain, but high-quality evidence for its effectiveness is lacking. To evaluate the effectiveness of radiofrequency denervation added to a standardized exercise program for patients with chronic low back pain. Three pragmatic multicenter, nonblinded randomized clinical trials on the effectiveness of minimal interventional treatments for participants with chronic low back pain (Mint study) were conducted in 16 multidisciplinary pain clinics in the Netherlands. Eligible participants were included between January 1, 2013, and October 24, 2014, and had chronic low back pain, a positive diagnostic block at the facet joints (facet joint trial, 251 participants), sacroiliac joints (sacroiliac joint trial, 228 participants), or a combination of facet joints, sacroiliac joints, or intervertebral disks (combination trial, 202 participants) and were unresponsive to conservative care. All participants received a 3-month standardized exercise program and psychological support if needed. Participants in the intervention group received radiofrequency denervation as well. This is usually a 1-time procedure, but the maximum number of treatments in the trial was 3. The primary outcome was pain intensity (numeric rating scale, 0-10; whereby 0 indicated no pain and 10 indicated worst pain imaginable) measured 3 months after the intervention. The prespecified minimal clinically important difference was defined as 2 points or more. Final follow-up was at 12 months, ending October 2015. Among 681 participants who were randomized (mean age, 52.2 years; 421 women [61.8%], mean baseline pain intensity, 7.1), 599 (88%) completed the 3-month follow-up, and 521 (77%) completed the 12-month follow-up. The mean difference in pain intensity between the radiofrequency denervation and control groups at 3 months was -0.18 (95% CI, -0.76 to 0.40) in the facet joint trial; -0.71 (95% CI, -1.35 to -0.06) in the sacroiliac joint

Crack Front Segmentation and Facet Coarsening in Mixed-Mode Fracture

Science.gov (United States)

Chen, Chih-Hung; Cambonie, Tristan; Lazarus, Veronique; Nicoli, Matteo; Pons, Antonio J.; Karma, Alain

2015-12-01

A planar crack generically segments into an array of "daughter cracks" shaped as tilted facets when loaded with both a tensile stress normal to the crack plane (mode I) and a shear stress parallel to the crack front (mode III). We investigate facet propagation and coarsening using in situ microscopy observations of fracture surfaces at different stages of quasistatic mixed-mode crack propagation and phase-field simulations. The results demonstrate that the bifurcation from propagating a planar to segmented crack front is strongly subcritical, reconciling previous theoretical predictions of linear stability analysis with experimental observations. They further show that facet coarsening is a self-similar process driven by a spatial period-doubling instability of facet arrays.

Non-Linear Detection for Joint Space-Frequency Block Coding and Spatial Multiplexing in OFDM-MIMO Systems

DEFF Research Database (Denmark)

Rahman, Imadur Mohamed; Marchetti, Nicola; Fitzek, Frank

2005-01-01

(SIC) receiver where the detection is done on subcarrier by sub-carrier basis based on both Zero Forcing (ZF) and Minimum Mean Square Error (MMSE) nulling criterion for the system. In terms of Frame Error Rate (FER), MMSE based SIC receiver performs better than all other receivers compared......In this work, we have analyzed a joint spatial diversity and multiplexing transmission structure for MIMO-OFDM system, where Orthogonal Space-Frequency Block Coding (OSFBC) is used across all spatial multiplexing branches. We have derived a BLAST-like non-linear Successive Interference Cancellation...... in this paper. We have found that a linear two-stage receiver for the proposed system [1] performs very close to the non-linear receiver studied in this work. Finally, we compared the system performance in spatially correlated scenario. It is found that higher amount of spatial correlation at the transmitter...

Domains and facets: hierarchical personality assessment using the revised NEO personality inventory.

Science.gov (United States)

Costa, P T; McCrae, R R

1995-02-01

Personality traits are organized hierarchically, with narrow, specific traits combining to define broad, global factors. The Revised NEO Personality Inventory (NEO-PI-R; Costa & McCrae, 1992c) assesses personality at both levels, with six specific facet scales in each of five broad domains. This article describes conceptual issues in specifying facets of a domain and reports evidence on the validity of NEO-PI-R facet scales. Facet analysis-the interpretation of a scale in terms of the specific facets with which it correlates-is illustrated using alternative measures of the five-factor model and occupational scales. Finally, the hierarchical interpretation of personality profiles is discussed. Interpretation on the domain level yields a rapid understanding of the individual interpretation of specific facet scales gives a more detailed assessment.

Tests of beam-based alignement at FACET

CERN Document Server

Latina, A; Schulte, D; Adli, E

2014-01-01

The performance of future linear colliders will depend critically on beam-based alignment (BBA) and feedback systems, which will play a crucial role in guaranteeing the low emittance transport throughout such machines. BBA algorithms designed to improve the beam transmission in a linac by simultaneously optimising the trajectory and minimising the residual dispersion, have thoughtfully been studied in theory over the last years, and successfully verified experimentally. One such technique is called Dispersion-Free Steering (DFS). A careful study of the DFS performance at the SLAC test facility FACET lead us to design a beam-based technique specifically targeted to reduce the impact of transverse short-range wakefields, rather than of the dispersion, being the wakefields the limiting factor to the FACET performance. This technique is called Wakefield-Free Steering (WFS). The results of the first tests of WFS at FACET are presented in this paper.

Improving personality facet scores with multidimensional computer adaptive testing

DEFF Research Database (Denmark)

Makransky, Guido; Mortensen, Erik Lykke; Glas, Cees A W

2013-01-01

personality tests contain many highly correlated facets. This article investigates the possibility of increasing the precision of the NEO PI-R facet scores by scoring items with multidimensional item response theory and by efficiently administering and scoring items with multidimensional computer adaptive...

The Structure of Spatial Ability Items: A Faceted Analysis.

Science.gov (United States)

Guttman, Ruth; Shoham, Ilana

1982-01-01

Eight spatial tests assembled with a mapping sentence of four content facets (rule type, dimensionality, presence or absence of rotation, and test format) were administered to 800 individuals. Smallest Space Analysis of an intercorrelation matrix yielded three facets which formed distinct regions in a two-dimensional projection of a…

Faceted MoS2 nanotubes and nanoflowers

International Nuclear Information System (INIS)

Deepak, Francis Leonard; Mayoral, Alvaro; Yacaman, Miguel Jose

2009-01-01

A simple synthesis of novel faceted MoS 2 nanotubes (NTs) and nanoflowers (NFs) starting from molybdenum oxide and thiourea as the sulphur source is reported. The MoS 2 nanotubes with the faceted morphology have not been observed before. Further the as-synthesized MoS 2 nanotubes have high internal surface area. The nanostructures have been characterized by a variety of electron microscopy techniques. It is expected that these MoS 2 nanostrutures will find important applications in energy storage, catalysis and field emission.

Long-Term Developmental Changes in Children's Lower-Order Big Five Personality Facets.

Science.gov (United States)

de Haan, Amaranta; De Pauw, Sarah; van den Akker, Alithe; Deković, Maja; Prinzie, Peter

2017-10-01

This study examined long-term developmental changes in mother-rated lower-order facets of children's Big Five dimensions. Two independent community samples covering early childhood (2-4.5 years; N = 365, 39% girls) and middle childhood to the end of middle adolescence (6-17 years; N = 579, 50% girls) were used. All children had the Belgian nationality. Developmental changes were examined using cohort-sequential latent growth modeling on the 18 facets of the Hierarchical Personality Inventory for Children. In early childhood, changes were mostly similar across child gender. Between 2 and 4.5 years, several facets showed mean-level stability; others changed in the direction of less Extraversion and Emotional Stability, and more Benevolence and Imagination. The lower-order facets of Conscientiousness showed opposite changes. Gender differences became more apparent from middle childhood onward for facets of all dimensions except Imagination, for which no gender differences were found. Between 6 and 17 years, same-dimension facets showed different shapes of growth. Facets that changed linearly changed mostly in the direction of less Extraversion, Benevolence, Conscientiousness, Emotional Stability, and Imagination. Changes in facets for which nonlinear growth was found generally moved in direction or magnitude during developmental transitions. This study provides comprehensive, fine-grained knowledge about personality development during the first two decades of life. © 2016 Wiley Periodicals, Inc.

Specific oriented metal-organic framework membranes and their facet-tuned separation performance.

Science.gov (United States)

Mao, Yiyin; Su, Binbin; Cao, Wei; Li, Junwei; Ying, Yulong; Ying, Wen; Hou, Yajun; Sun, Luwei; Peng, Xinsheng

2014-09-24

Modulating the crystal morphology, or the exposed crystal facets, of metal-organic frameworks (MOFs) expands their potential applications in catalysis, adsorption, and separation. In this article, by immobilizing the citrate modulators on Au nanoparticles and subsequently being fixed on solid copper hydroxide nanostrands, a well-intergrown and oriented HKUST-1 cube crystal membrane was formed at room temperature. In contrast, in the absence of Au nanoparticles, well-intergrown and oriented cuboctahedron and octahedron membranes were formed in water/ethanol and ethanol, respectively. The gas separation performances of these HKUST-1 membranes were tuned via their exposed facets with defined pore sizes. The HKUST-1 cube membrane with exposed {001} facets demonstrated the highest permeance but lowest gas binary separation factors, while the octahedron membrane with exposed {111} facets presented the highest separation factors but lowest permeance, since the window size of {111} facets is 0.46 nm which is smaller than 0.9 nm of {001} facets. Separation of 0.38 nm CO2 from 0.55 nm SF6 was realized by the HKUST-1 octahedron membrane. As a proof of concept, this will open a new way to design MOF-related separation membranes by facet controlling.

In-situ load-deformation characterization of the CSM/OCRD jointed test block

International Nuclear Information System (INIS)

Richardson, A.M.; Hustrulid, W.; Brown, S.; Ubbes, W.

1985-01-01

An extensive ambient-temperature test series has recently been completed on a block of Precambrian Gneiss at the Colorado School of Mines (CSM) Experimental Mine in Idaho Springs, Colorado. Block tests came into existence out of a desire to test a relatively large volume of rock and thereby minimize the scaling problems encountered when laboratory test results are used to obtain modeling parameters for full-size structures. A typical block test involves isolation of a large, approximately two-meter cube of rock by cutting slots on four sides and inserting flatjacks for loading. Much interest has recently centered around block tests as a promising method for in-situ characterization of rock-masses for licensing future commercial nuclear-waste repositories in crystalline rock. To date only a few block tests have been conducted

Does sensory stimulation threshold affect lumbar facet radiofrequency denervation outcomes? A prospective clinical correlational study.

Science.gov (United States)

Cohen, Steven P; Strassels, Scott A; Kurihara, Connie; Lesnick, Ivan K; Hanling, Steven R; Griffith, Scott R; Buckenmaier, Chester C; Nguyen, Conner

2011-11-01

Radiofrequency facet denervation is one of the most frequently performed procedures for chronic low back pain. Although sensory stimulation is generally used as a surrogate measure to denote sufficient proximity of the electrode to the nerve, no study has examined whether stimulation threshold influences outcome. We prospectively recorded data in 61 consecutive patients undergoing lumbar facet radiofrequency denervation who experienced significant pain relief after medial branch blocks. For each nerve lesioned, multiple attempts were made to maximize sensory stimulation threshold (SST). Mean SST was calculated on the basis of the lowest stimulation perceived at 0.1-V increments for each medial branch. A positive outcome was defined as a ≥50% reduction in back pain coupled with a positive satisfaction score lasting ≥3 months. The relationship between mean SST and denervation outcomes was evaluated via a receiver's operating characteristic (ROC) curve, and stratifying outcomes on the basis of various cutoff values. No correlation was noted between mean SST and pain relief at rest (Pearson's r=-0.01, 95% confidence interval [CI]: -0.24 to 0.23, P=0.97), with activity (r=-0.17, 95% CI: -0.40 to 0.07, P=0.20), or a successful outcome. No optimal SST could be identified. There is no significant relationship between mean SST during lumbar facet radiofrequency denervation and treatment outcome, which may be due to differences in general sensory perception. Because stimulation threshold was optimized for each patient, these data cannot be interpreted to suggest that sensory testing should not be performed, or that high sensory stimulation thresholds obtained on the first attempt should be deemed acceptable.

Crustal structure across the NE Tibetan Plateau and Ordos Block from the joint inversion of receiver functions and Rayleigh-wave dispersions

Science.gov (United States)

Li, Yonghua; Wang, Xingchen; Zhang, Ruiqing; Wu, Qingju; Ding, Zhifeng

2017-05-01

We investigated the crustal structure at 34 stations using the H-κ stacking method and jointly inverting receiver functions with Rayleigh-wave phase and group velocities. These seismic stations are distributed along a profile extending across the Songpan-Ganzi Terrane, Qinling-Qilian terranes and southwestern Ordos Basin. Our results reveal the variation in crustal thickness across this profile. We found thick crust beneath the Songpan-Ganzi Terrane (47-59 km) that decreases to 45-47 km in the west Qinling and Qilian terranes, and reaches its local minimum beneath the southwestern Ordos Block (43-51 km) at an average crustal thickness of 46.7 ± 2.5 km. A low-velocity zone in the upper crust was found beneath most of the stations in NE Tibet, which may be indicative of partial melt or a weak detachment layer. Our observations of low to moderate Vp/Vs (1.67-1.79) represent a felsic to intermediate crustal composition. The shear velocity models estimated from joint inversions also reveal substantial lateral variations in velocity beneath the profile, which is mainly reflected in the lower crustal velocities. For the Ordos Block, the average shear wave velocities below 20 km are 3.8 km/s, indicating an intermediate-to-felsic lower crust. The thick NE Tibet crust is characterized by slow shear wave velocities (3.3-3.6 km/s) below 20 km and lacks high-velocity material (Vs ≥ 4.0 km/s) in the lower crust, which may be attributed to mafic lower crustal delamination or/and the thickening of the upper and middle crust.

The prevalence cervical facet arthrosis: an osseous study in a cadveric population.

Science.gov (United States)

Lee, Michael J; Riew, K Daniel

2009-09-01

Cervical facet arthrosis has been implicated as a cause for neck pain, radiculopathy, occipital headache, and ear pain. The objective of this study was to examine the occurrence of facet arthrosis in the cervical spine. This study examined cadaveric specimens from the Hamann Todd Collection. None. None. Four hundred sixty-five skeletally mature human cervical spines from the Hamann Todd Collection in the Cleveland Museum of Natural History were obtained for analysis. We analyzed the facets for arthrosis. We graded no arthrosis as Grade 0. Facets with peripheral osteophytic reaction, but with no lateral mass distortion were graded as Grade 1. Facets with peripheral osteophytic reaction and lateral mass distortion were graded as Grade 2. Facets that were ankylosed were graded as Grade 3. Each specimen was examined bilaterally at levels from C2-C3 through C6-C7, yielding 4,650 specimen assessments. The data were analyzed to compare cervical levels, gender, facet side, age groups, and race. Proportion analysis, using the Fisher exact test, was used to assess for statistical difference between various groupings. In the entire population of 465 specimens, the upper cervical specimens appeared to be affected by facet arthrosis more frequently than the lower levels; 12.37% of the specimens had bony evidence of arthrosis at the C2-C3 level; 13.33% of the specimens had arthrosis occur at the C3-C4 level; 14.62% at the C4-C5 level; 7.85% at the C5-C6 level, and 4.84% at the C6-C7 level. The large majority of all cervical facet arthrosis was found to be Grade 1 at all levels. In the older population, the prevalence of facet arthrosis is as high as 29.87% for the C4-C5 level. C4-C5 level appears to be affected the most frequently, followed by the C3-C4 level, then C2-C3, C5-C6, and C6-C7. The prevalence of cervical facet arthrosis increases with age, and occurs more commonly in the upper cervical spine.

The usability issues of faceted navigation in digital libraries

Directory of Open Access Journals (Sweden)

Eliane Blumer

2014-05-01

For more than five years, the project ACCEPT, a subproject of a Swiss national project called e-lib.ch, analyzes the usability and usefulness of digital libraries, by using user oriented methods. Experience has shown that filters provided through faceted navigation are considered as positive and very useful by end users. Nevertheless, based on different test results, several returning mistakes have been detected and it turns out that there are some ‘unwritten standards’ concerning e.g. position, labelling or ranking which should be respected to fulfil the aim of a good usability which users do expect of such web services. In this poster we will first give an introduction to faceted navigation, actual design issues and their use in digital libraries and then present testing methods, which can be easily applied in a digital library context. Together with a list of best practices concerning faceted navigation drawn out of different test experiences, the paper should give the reader all important information to evaluate its current faceted navigation and see where improvements could be made.

Facility for Advanced Accelerator Experimental Tests at SLAC (FACET) Conceptual Design Report

Energy Technology Data Exchange (ETDEWEB)

Amann, J.; Bane, K.; /SLAC

2009-10-30

This Conceptual Design Report (CDR) describes the design of FACET. It will be updated to stay current with the developing design of the facility. This CDR begins as the baseline conceptual design and will evolve into an 'as-built' manual for the completed facility. The Executive Summary, Chapter 1, gives an introduction to the FACET project and describes the salient features of its design. Chapter 2 gives an overview of FACET. It describes the general parameters of the machine and the basic approaches to implementation. The FACET project does not include the implementation of specific scientific experiments either for plasma wake-field acceleration for other applications. Nonetheless, enough work has been done to define potential experiments to assure that the facility can meet the requirements of the experimental community. Chapter 3, Scientific Case, describes the planned plasma wakefield and other experiments. Chapter 4, Technical Description of FACET, describes the parameters and design of all technical systems of FACET. FACET uses the first two thirds of the existing SLAC linac to accelerate the beam to about 20GeV, and compress it with the aid of two chicanes, located in Sector 10 and Sector 20. The Sector 20 area will include a focusing system, the generic experimental area and the beam dump. Chapter 5, Management of Scientific Program, describes the management of the scientific program at FACET. Chapter 6, Environment, Safety and Health and Quality Assurance, describes the existing programs at SLAC and their application to the FACET project. It includes a preliminary analysis of safety hazards and the planned mitigation. Chapter 7, Work Breakdown Structure, describes the structure used for developing the cost estimates, which will also be used to manage the project. The chapter defines the scope of work of each element down to level 3.

Facility for Advanced Accelerator Experimental Tests at SLAC (FACET) Conceptual Design Report

International Nuclear Information System (INIS)

Amann, J.; Bane, K.

2009-01-01

This Conceptual Design Report (CDR) describes the design of FACET. It will be updated to stay current with the developing design of the facility. This CDR begins as the baseline conceptual design and will evolve into an 'as-built' manual for the completed facility. The Executive Summary, Chapter 1, gives an introduction to the FACET project and describes the salient features of its design. Chapter 2 gives an overview of FACET. It describes the general parameters of the machine and the basic approaches to implementation. The FACET project does not include the implementation of specific scientific experiments either for plasma wake-field acceleration for other applications. Nonetheless, enough work has been done to define potential experiments to assure that the facility can meet the requirements of the experimental community. Chapter 3, Scientific Case, describes the planned plasma wakefield and other experiments. Chapter 4, Technical Description of FACET, describes the parameters and design of all technical systems of FACET. FACET uses the first two thirds of the existing SLAC linac to accelerate the beam to about 20GeV, and compress it with the aid of two chicanes, located in Sector 10 and Sector 20. The Sector 20 area will include a focusing system, the generic experimental area and the beam dump. Chapter 5, Management of Scientific Program, describes the management of the scientific program at FACET. Chapter 6, Environment, Safety and Health and Quality Assurance, describes the existing programs at SLAC and their application to the FACET project. It includes a preliminary analysis of safety hazards and the planned mitigation. Chapter 7, Work Breakdown Structure, describes the structure used for developing the cost estimates, which will also be used to manage the project. The chapter defines the scope of work of each element down to level 3.

Technical Design Report for the FACET-II Project at SLAC National Accelerator Laboratory

Energy Technology Data Exchange (ETDEWEB)

None, None

2016-08-26

Electrons can “surf” on waves of plasma – a hot gas of charged particles – gaining very high energies in very short distances. This approach, called plasma wakefield acceleration, has the potential to dramatically shrink the size and cost of particle accelerators. Research at the SLAC National Accelerator Laboratory has demonstrated that plasmas can provide 1,000 times the acceleration in a given distance compared with current technologies. Developing revolutionary and more efficient acceleration techniques that allow for an affordable high-energy collider has been the focus of FACET, a National User Facility at SLAC. FACET used part of SLAC’s two-mile-long linear accelerator to generate high-density beams of electrons and their antimatter counterparts, positrons. Research into plasma wakefield acceleration was the primary motivation for constructing FACET. In April 2016, FACET operations came to an end to make way for the second phase of SLAC’s x-ray laser, the LCLS-II, which will use part of the tunnel occupied by FACET. FACET-II is a new test facility to provide the unique capability to develop advanced acceleration and coherent radiation techniques with high-energy electron and positron beams. FACET-II represents a major upgrade over current FACET capabilities and the breadth of the potential research program makes it truly unique.

Extraversion and psychopathology: A facet-level analysis.

Science.gov (United States)

Watson, David; Stasik, Sara M; Ellickson-Larew, Stephanie; Stanton, Kasey

2015-05-01

The goal of this study was to explicate how the lower order facets of extraversion are related to psychopathology. We used a "bottom-up" approach in which specific extraversion scales from 3 comprehensive personality inventories were used to model these facets as latent factors. We collected both self-report and interview measures of a broad range of psychopathology from a large community sample. Replicating previous findings using a similar approach (Naragon-Gainey & Watson, 2014; Naragon-Gainey, Watson, & Markon, 2009), structural analyses yielded four factors: Positive Emotionality, Sociability, Assertiveness, and Experience Seeking. Scores on these latent dimensions were related to psychopathology in correlational analyses and in two sets of regressions (the first series used the four facets as predictors; the second included composite scores on the other Big Five domains as additional predictors). These results revealed a striking level of specificity. As predicted, Positive Emotionality displayed especially strong negative links to depressive symptoms and diagnoses. Sociability also was negatively related to psychopathology, showing particularly strong associations with indicators of social dysfunction and the negative symptoms of schizotypy (i.e., social anxiety, social aloofness, and restricted affectivity). Assertiveness generally had weak associations at the bivariate level but was negatively related to social anxiety and was positively correlated with some forms of externalizing. Finally, Experience Seeking had substantial positive associations with a broad range of indicators related to externalizing and bipolar disorder; it also displayed negative links to agoraphobia. These differential correlates demonstrate the importance of examining personality-psychopathology relations at the specific facet level. (c) 2015 APA, all rights reserved).

[Application and research progress of subtalar distraction bone block arthrodesis in treatment of calcaneus fracture malunion].

Science.gov (United States)

Wang, Shanxi; Li, Jun; Huang, Fuguo; Liu, Lei

2017-05-01

To review the application and research progress of subtalar distraction bone block arth-rodesis in the treatment of calcaneus fracture malunion. The recent literature concerning the history, surgical technique, postoperative complication, indications, and curative effect of subtalar distraction arthrodesis with bone graft block interposition in the treatment of calcaneus fracture malunion was summarized and analyzed. Subtalar distraction bone block arthrodesis is one of the main ways to treat calcaneus fracture malunion, including a combined surgery with subtalar arthrodesis and realignment surgery for hindfoot deformity using bone block graft. The advantage is on the base of subtalar joint fusion, through one-time retracting subtalar joint, the posterior articular surface of subtalar joint implants bone block can partially restore calcaneal height, thus improving the function of the foot. Compared with other calcaneal malunion treatments, subtalar distraction arthrodesis is effective to correct complications caused by calcaneus fracture malunion, and it can restore the height of talus and calcaneus, correct loss of talocalcaneal angle, and ease pain. Subtalar distraction bone block arthrodesis has made remarkable progress in the treatment of calcaneus fracture malunion, but it has the disadvantages of postoperative nonunion and absorption of bone block, so further study is needed.

2016 FACET-II Science Workshop Summary Report

Energy Technology Data Exchange (ETDEWEB)

Hogan, Mark J., ed.

2017-07-19

The second in a series of FACET-II Science Workshops was held at SLAC National Accelerator Laboratory on October 17-19, 2016 [1]. The workshop drew thirty-five participants from eighteen different institutions including CERN, DESY, Ecole Polytechnique, FNAL, JAI, LBNL, LLNL, Radiabeam, Radiasoft, SLAC, Stony Brook, Strathclyde, Tech-X, Tsinghua, UC Boulder, UCLA and UT Austin. The 2015 workshop [2, 3] helped prioritize research directions for FACET-II. The 2016 workshop was focused on understanding what improvements are needed at the facility to support the next generation of experiments. All presentations are linked to the workshop website as a permanent record.

Joint Manipulation: Toward a General Theory of High-Velocity, Low-Amplitude Thrust Techniques.

Science.gov (United States)

Harwich, Andrew S

2017-12-01

The objective of this study was to describe the initial stage of a generalized theory of high-velocity, low-amplitude thrust (HVLAT) techniques for joint manipulation. This study examined the movements described by authors from the fields of osteopathy, chiropractic, and physical therapy to produce joint cavitation in both the metacarpophalangeal (MCP) joint and the cervical spine apophysial joint. This study qualitatively compared the kinetics, the similarities, and the differences between MCP cavitation and cervical facet joint cavitation. A qualitative vector analysis of forces and movements was undertaken by constructing computer-generated, simplified graphical models of the MCP joint and a typical cervical apophysial joint and imposing the motions dictated by the clinical technique. Comparing the path to cavitation of 2 modes of HVLAT for the MCP joint, namely, distraction and hyperflexion, it was found that the hyperflexion method requires an axis of rotation, the hinge axis, which is also required for cervical HVLAT. These results show that there is an analogue of cervical HVLAT in one of the MCP joint HVLATs. The study demonstrated that in a theoretical model, the path to joint cavitation is the same for asymmetric separation of the joint surfaces in the cervical spine and the MCP joints.

Hydrothermal synthesis of magnetite particles with uncommon crystal facets

Directory of Open Access Journals (Sweden)

Junki Sato

2014-09-01

Full Text Available Hydrothermal synthesis of Fe3O4 (magnetite particles was carried out using organic compounds as morphology control agents to obtain magnetite crystals with uncommon facets. It was established that the morphology of Fe3O4 crystals obtained by hydrothermal treatment of an aqueous solution containing Fe2+ and organic compounds depended on the organic compound used. The shape of the Fe3O4 particles obtained when no additives were used was quasi-octahedral. In contrast, the addition of picolinic acid, citric acid or pyridine resulted in the formation of polyhedral crystals, indicating the presence of not only {1 1 1}, {1 0 0} and {1 1 0} facets but also high-index facets including at least {3 1 1} and {3 3 1}. When citric acid was used as an additive, octahedral crystals with {1 1 1} facets also appeared, and their size decreased as the amount of citric acid was increased. Thus, control of Fe3O4 particle morphology was achieved by a simple hydrothermal treatment using additives.

Resistance microwelding of 316L stainless steel wire to block

DEFF Research Database (Denmark)

Friis, Kasper Storgaard; Khan, M.I.; Bay, Niels

2011-01-01

The excellent corrosion resistance of low carbon vacuum melted 316 stainless steel coupled with its non-magnetic properties makes it ideal for biomedical applications. The typical joint geometry for microcomponents, such as medical implants, includes joining of fine wire to a larger block. However......, this type of joint has received little attention in the current literature. The present study was conducted to examine the microstructure and mechanical properties of low carbon vacuum melted 316 stainless steel wire welded to a larger block. Results revealed solid state bonding occurring at low currents......, while fusion bonding occurred at higher currents. This was due to the highly asymmetrical heat generation resulting in almost complete melting of the wire before the initiation of interfacial melting. This is a distinctly different bonding mechanism compared to previous studies on crossed wire joints....

Synthesis and photocatalytic activity of mesoporous – (001) facets TiO_2 single crystals

International Nuclear Information System (INIS)

Dong, Yeshuo; Fei, Xuening; Zhou, Yongzhu

2017-01-01

Highlights: • The (001) facets of TiO_2 single crystals with mesoporous structure. • The (010) and (100) facets of TiO_2 single crystals were covered by the flower – shaped TiO_2 crystals. • This special structure could promote charge separation and provide more active sites, which will lead to a substantial increase in photocatalytic activity. - Abstract: In this work, the mesoporous – (001) facets TiO_2 single crystals have been successfully synthesized through a two-step solvothermal route without any template. Their structure and morphology were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), ultraviolet-visible (UV–vis) diffuse reflectance spectroscopy and energy dispersive X-ray spectrometer (EDX). Based on the different characteristics and atomic arrangements on each facet of anatase TiO_2 single crystals, we synthesized these mesoporous – (001) facets TiO_2 single crystals by controlling the interaction characteristics of hydrofluoric acid (HF) and isopropanol (i-PrOH) on the crystal facets. It can been seen that the (001) facets of these as-synthesized TiO_2 single crystals have a clear mesoporous structure through the SEM images and BET methods. Moreover, the other four facets were covered by the flower – shaped TiO_2 crystals with the generation of the mesoporous – (001) facets. This special and interesting morphology could promote charge separation and provide more active sites, which will lead to a substantial increase in photocatalytic activity. Moreover, it is more intuitive to reflect that the different crystal facets possess the different properties due to their atomic arrangement. Besides, according to the different synthetic routes, we proposed and discussed a plausible synthesis mechanism of these mesoporous – (001) facets TiO_2 single crystals.

CT-guided percutaneous radiofrequency denervation of the sacroiliac joint

Energy Technology Data Exchange (ETDEWEB)

Gevargez, A.; Schirp, S.; Braun, M. [Department of Radiology and Microtherapy, University of Witten/Herdecke, Bochum (Germany); Groenemeyer, D. [Department of Radiology and Microtherapy, University of Witten/Herdecke, Bochum (Germany); EFMT Development and Research Center for Microtherapy, Bochum (Germany)

2002-06-01

Defining the origin of low back pain is a challenging task. Among a variety of factors the sacroiliac joint (SIJ) is a possible pain generator, although precise diagnosis is difficult. Joint blocks may reduce pain, but are, in cases, of only temporary effect. This study was conducted to evaluate CT-guided percutaneous radiofrequency denervation of the sacroiliac joint in patients with low back pain. The procedure was performed on 38 patients who only temporarily responded to CT-guided SIJ blocks. The denervation was carried out in the posterior interosseous sacroiliac ligaments and on the dorsal rami of the fifth spinal nerve. All interventions were carried out under CT guidance as out-patient therapies. Three months after the therapy, 13 patients (34.2%) were completely free of pain. Twelve patients (31.6%) reported on a substantial pain reduction, 7 patients (18.4%) had obtained a slight and 3 patients (7.9%) no pain reduction. The data of 3 patients (7.9%) was missing. There were no intra- or postoperative complications. Computed tomography-guided percutaneous radiofrequency denervation of the sacroiliac joint appears safe and effective. The procedure may be a useful therapeutic modality, especially in patients with chronic low back pain, who only temporarily respond to therapeutic blocks. (orig.)

CT-guided percutaneous radiofrequency denervation of the sacroiliac joint

International Nuclear Information System (INIS)

Gevargez, A.; Schirp, S.; Braun, M.; Groenemeyer, D.

2002-01-01

Defining the origin of low back pain is a challenging task. Among a variety of factors the sacroiliac joint (SIJ) is a possible pain generator, although precise diagnosis is difficult. Joint blocks may reduce pain, but are, in cases, of only temporary effect. This study was conducted to evaluate CT-guided percutaneous radiofrequency denervation of the sacroiliac joint in patients with low back pain. The procedure was performed on 38 patients who only temporarily responded to CT-guided SIJ blocks. The denervation was carried out in the posterior interosseous sacroiliac ligaments and on the dorsal rami of the fifth spinal nerve. All interventions were carried out under CT guidance as out-patient therapies. Three months after the therapy, 13 patients (34.2%) were completely free of pain. Twelve patients (31.6%) reported on a substantial pain reduction, 7 patients (18.4%) had obtained a slight and 3 patients (7.9%) no pain reduction. The data of 3 patients (7.9%) was missing. There were no intra- or postoperative complications. Computed tomography-guided percutaneous radiofrequency denervation of the sacroiliac joint appears safe and effective. The procedure may be a useful therapeutic modality, especially in patients with chronic low back pain, who only temporarily respond to therapeutic blocks. (orig.)

Local facet approximation for image stitching

Science.gov (United States)

Li, Jing; Lai, Shiming; Liu, Yu; Wang, Zhengming; Zhang, Maojun

2018-01-01

Image stitching aims at eliminating multiview parallax and generating a seamless panorama given a set of input images. This paper proposes a local adaptive stitching method, which could achieve both accurate and robust image alignments across the whole panorama. A transformation estimation model is introduced by approximating the scene as a combination of neighboring facets. Then, the local adaptive stitching field is constructed using a series of linear systems of the facet parameters, which enables the parallax handling in three-dimensional space. We also provide a concise but effective global projectivity preserving technique that smoothly varies the transformations from local adaptive to global planar. The proposed model is capable of stitching both normal images and fisheye images. The efficiency of our method is quantitatively demonstrated in the comparative experiments on several challenging cases.

Minimally invasive arthrodesis for chronic sacroiliac joint dysfunction using the SImmetry SI Joint Fusion system

OpenAIRE

Block, Jon; Miller,Larry

2014-01-01

Larry E Miller,1,2 Jon E Block21Miller Scientific Consulting, Inc., Asheville, NC, USA; 2The Jon Block Group, San Francisco, CA, USA Abstract: Chronic sacroiliac (SI) joint-related low back pain (LBP) is a common, yet under-diagnosed and undertreated condition due to difficulties in accurate diagnosis and highly variable treatment practices. In patients with debilitating SI-related LBP for at least 6 months duration who have failed conservative management, arthrodesis is a viable option. The...

Sacroiliac Joint Interventions.

Science.gov (United States)

Soto Quijano, David A; Otero Loperena, Eduardo

2018-02-01

Sacroiliac joint (SIJ) pain is an important cause of lower back problems. Multiple SIJ injection techniques have been proposed over the years to help in the diagnosis and treatment of this condition. However, the SIJ innervation is complex and variable, and truly intra-articular injections are sometimes difficult to obtain. Different sacroiliac joint injections have shown to provide pain relief in patients suffering this ailment. Various techniques for intraarticular injections, sacral branch blocks and radiofrequency ablation, both fluoroscopy guided and ultrasound guided are discussed in this paper. Less common techniques like prolotherapy, platelet rich plasma injections and botulism toxin injections are also discussed. Copyright © 2017 Elsevier Inc. All rights reserved.

Optical fiber end-facet polymer suspended-mirror devices

Science.gov (United States)

Yao, Mian; Wu, Jushuai; Zhang, A. Ping; Tam, Hwa-Yaw; Wai, P. K. A.

2017-04-01

This paper presents a novel optical fiber device based on a polymer suspended mirror on the end facet of an optical fiber. With an own-developed optical 3D micro-printing technology, SU-8 suspended-mirror devices (SMDs) were successfully fabricated on the top of a standard single-mode optical fiber. Optical reflection spectra of the fabricated SU- 8 SMDs were measured and compared with theoretical analysis. The proposed technology paves a way towards 3D microengineering of the small end-facet of optical fibers to develop novel fiber-optic sensors.

Buckling behavior of origami unit cell facets under compressive loads

Science.gov (United States)

Kshad, Mohamed Ali Emhmed; Naguib, Hani E.

2018-03-01

Origami structures as cores for sandwich structures are designed to withstand the compressive loads and to dissipate compressive energy. The deformation of the origami panels and the unit cell facets are the primary factors behind the compressive energy dissipation in origami structures. During the loading stage, the origami structures deform through the folding and unfolding process of the unit cell facets, and also through the plastic deformation of the facets. This work presents a numerical study of the buckling behavior of different origami unit cell elements under compressive loading. The studied origami configurations were Miura and Ron-Resch-like origami structures. Finite element package was used to model the origami structures. The study investigated the buckling behavior of the unit cell facets of two types of origami structures Miura origami and Ron-Resch-Like origami structures. The simulation was conducted using ANSYS finite element software, in which the model of the unit cell represented by shell elements, and the eigenvalues buckling solver was used to predict the theoretical buckling of the unit cell elements.

Correlation between extension-block K-wire insertion angle and postoperative extension loss in mallet finger fracture.

Science.gov (United States)

Lee, S K; Kim, Y H; Moon, K H; Choy, W S

2018-02-01

Extension-block pinning represents a simple and reliable surgical technique. Although this procedure is commonly performed successfully, some patients develop postoperative extension loss. To date, the relationship between extension-block Kirschner wire (K-wire) insertion angle and postoperative extension loss in mallet finger fracture remains unclear. We aimed to clarify this relationship and further evaluate how various operative and non-operative factors affect postoperative extension loss after extension-block pinning for mallet finger fracture. A retrospective study was conducted to investigate a relationship between extension block K-wire insertion angle and postoperative extension loss. The inclusion criteria were: (1) a dorsal intra-articular fracture fragment involving 30% of the base of the distal phalanx with or without volar subluxation of the distal phalanx; and (2) block K-wire insertion angle and fixation angle of the distal interphalangeal (DIP) joint were assessed using lateral radiograph at immediate postoperative time. Postoperative extension loss was assessed by using lateral radiograph at latest follow-up. Extension-block K-wire insertion angle was defined as the acute angle between extension block K-wire and longitudinal axis of middle phalangeal head. DIP joint fixation angle was defined as the acute angle between the distal phalanx and middle phalanx longitudinal axes. Seventy-five patients were included. The correlation analysis revealed that extension-block K-wire insertion angle had a negative correlation with postoperative extension loss, whereas fracture size and time to operation had a positive correlation (correlation coefficient for extension block K-wire angle: -0.66, facture size: +0.67, time to operation: +0.60). When stratifying patients in terms of negative and positive fixation angle of the DIP joint, the independent t-test showed that mean postoperative extension loss is -3.67° and +4.54° (DIP joint fixation angles of block

A New Radiofrequency Ablation Procedure to Treat Sacroiliac Joint Pain.

Science.gov (United States)

Cheng, Jianguo; Chen, See Loong; Zimmerman, Nicole; Dalton, Jarrod E; LaSalle, Garret; Rosenquist, Richard

2016-01-01

Low back pain may arise from disorders of the sacroiliac joint in up to 30% of patients. Radiofrequency ablation (RFA) of the nerves innervating the sacroiliac joint has been shown to be a safe and efficacious strategy. We aimed to develop a new RFA technique to relieve low back pain secondary to sacroiliac joint disorders. Methodology development with validation through prospective observational non-randomized trial (PONRT). Academic multidisciplinary health care system, Ohio, USA. We devised a guide-block to facilitate accurate placement of multiple electrodes to simultaneously ablate the L5 dorsal ramus and lateral branches of the S1, S2, and S3 dorsal rami. This was achieved by bipolar radiofrequency ablation (b-RFA) to create a strip lesion from the lateral border of the base of the sacral superior articular process (L5-S1 facet joint) to the lateral border of the S3 sacral foramen. We applied this technique in 31 consecutive patients and compared the operating time, x-ray exposure time and dose, and clinical outcomes with patients (n = 62) who have been treated with the cooled radiofrequency technique. Patients' level of pain relief was reported as 80% pain relief at one, 3, 6, and 12 months after the procedure. The relationship between RFA technique and duration of pain relief was evaluated using interval-censored multivariable Cox regression. The new technique allowed reduction of operating time by more than 50%, x-ray exposure time and dose by more than 80%, and cost by more than $1,000 per case. The percent of patients who achieved > 50% pain reduction was significantly higher in the b-RFA group at 3, 6, and 12 months follow-up, compared to the cooled radiofrequency group. No complications were observed in either group. Although the major confounding factors were taken into account in the analysis, use of historical controls does not balance observed and unobserved potential confounding variables between groups so that the reported results are potentially

A Study on the Saving Method of Plate Jigs in Hull Block Butt Welding

Science.gov (United States)

Ko, Dae-Eun

2017-11-01

A large amount of plate jigs is used for alignment of welding line and control of welding deformations in hull block assembly stage. Besides material cost, the huge working man-hours required for working process of plate jigs is one of the obstacles in productivity growth of shipyard. In this study, analysis method was proposed to simulate the welding deformations of block butt joint with plate jigs setting. Using the proposed analysis method, an example simulation was performed for actual panel block joint to investigate the saving method of plate jigs. Results show that it is possible to achieve two objectives of quality accuracy of the hull block and saving the plate jig usage at the same time by deploying the plate jigs at the right places. And the proposed analysis method can be used in establishing guidelines for the proper use of plate jigs in block assembly stage.

Fiber facet gratings for high power fiber lasers

Science.gov (United States)

Vanek, Martin; Vanis, Jan; Baravets, Yauhen; Todorov, Filip; Ctyroky, Jiri; Honzatko, Pavel

2017-12-01

We numerically investigated the properties of diffraction gratings designated for fabrication on the facet of an optical fiber. The gratings are intended to be used in high-power fiber lasers as mirrors either with a low or high reflectivity. The modal reflectance of low reflectivity polarizing grating has a value close to 3% for TE mode while it is significantly suppressed for TM mode. Such a grating can be fabricated on laser output fiber facet. The polarizing grating with high modal reflectance is designed as a leaky-mode resonant diffraction grating. The grating can be etched in a thin layer of high index dielectric which is sputtered on fiber facet. We used refractive index of Ta2O5 for such a layer. We found that modal reflectance can be close to 0.95 for TE polarization and polarization extinction ratio achieves 18 dB. Rigorous coupled wave analysis was used for fast optimization of grating parameters while aperiodic rigorous coupled wave analysis, Fourier modal method and finite difference time domain method were compared and used to compute modal reflectance of designed gratings.

Some Results on facets for linear inequality in 0-1 variables

Directory of Open Access Journals (Sweden)

D. Sashi Bhusan

2010-03-01

Full Text Available The facet of Knapsack ploytope, i.e. convex hull of 0-1 points satisfying a given linear inequality has been presented in this current paper. Such type of facets plays an important role in set covering set partitioning, matroidal-intersection vertex- packing, generalized assignment and other combinatorial problems. Strong covers for facets of Knapsack ploytope has been developed in the first part of the present paper. Generating family of valid cutting planes that satisfy inequality with 0-1 variables through algorithms are the attraction of this paper.

Joint shape segmentation with linear programming

KAUST Repository

Huang, Qixing; Koltun, Vladlen; Guibas, Leonidas

2011-01-01

program is solved via a linear programming relaxation, using a block coordinate descent procedure that makes the optimization feasible for large databases. We evaluate the presented approach on the Princeton segmentation benchmark and show that joint shape

The morphological characteristics of the antebrachiocarpal joint of the cheetah (Acinonyx jubatus).

Science.gov (United States)

Ohale, L O C; Groenewald, H B

2003-03-01

A morphological study of the structures of the antebrachiocarpal (AC) joint of the cheetah was carded out by dissection of eight forelimbs obtained from four adult cheetahs culled from the Kruger National Park, Republic of South Africa. The aim was to evaluate the deviations of this joint from the normal feline pattern and to consider their possible relationship to the cheetah's adaptation to speed. Although published data on the AC joint of the other felids show general resemblance to that of the cheetah, there are nevertheless slight, but significant variations and modifications which tend to suggest adaptation to speed. The shafts of the radius and ulna of the cheetah are relatively straight and slender, with poorly developed distal ends. The ulnar notch is reduced to a very shallow concavity while the corresponding ulnar facet is a barely noticeable convexity, separated from the distal ulnar articular facet by an ill-defined groove. The movement of the distal radio-ulnar joint is highly restricted by the presence of a fibro-cartilaginous structure and a strong interrosseous membrane, limiting pronation and supination normally achieved by the rotation of the radius around the ulna. The extensor grooves at the distal extremity of the radius are deep and narrow and are guarded by prominent ridges. A thick extensor retinaculum anchors the strong extensor tendons in these grooves. The distal articular surface of the radius is concave in all directions except at the point where it moves into its stylold process. At this point it is convex in the dorsopalmar direction, with a surface that is rather deep and narrow. The proximal row of carpal bones presents a strongly convex surface, which is more pronounced in the dorsopalmar direction with the greatest convexity on the lateral aspect. Medially, there is a ridge-like concavity across the base of the tubercle, which rocks on the flexor surface of the radius, limiting excessive flexion as well as restricting lateral

Influence of the size of facets on point focus solar concentrators

Energy Technology Data Exchange (ETDEWEB)

Riveros-Rosas, David [Instituto de Geofisica, Universidad Nacional Autonoma de Mexico, Ciudad Universitaria, Col. Copilco, Coyoacan, CP 04510 DF (Mexico); Sanchez-Gonzalez, Marcelino [Centro Nacional de Energias Renovables, c/Somera 7-9, CP 28026 Madrid (Spain); Arancibia-Bulnes, Camilo A.; Estrada, Claudio A. [Centro de Investigacion en Energia, Universidad Nacional Autonoma de Mexico, Priv. Xochicalco s/n, Morelos (Mexico)

2011-03-15

It is a common practice in the development of point focus solar concentrators to use multiple identical reflecting facets, as a practical and economic alternative for the design and construction of large systems. This kind of systems behaves in a different manner than continuous paraboloidal concentrators. A theoretical study is carried out to understand the effect of the size of facets and of their optical errors in multiple facet point focus solar concentrating systems. For this purpose, a ray tracing program was developed based on the convolution technique, in which the brightness distribution of the sun and the optical errors of the reflecting surfaces are considered. The study shows that both the peak of concentration and the optimal focal distance of the system strongly depend on the size of the facets, and on their optical errors. These results are useful to help concentrator developers to have a better understanding of the relationship between manufacturing design restrictions and final optical behavior. (author)

Facets of emotional awareness and associations with emotion regulation and depression.

Science.gov (United States)

Boden, Matthew Tyler; Thompson, Renee J

2015-06-01

Emotion theories posit that effective emotion regulation depends upon the nuanced information provided by emotional awareness; attending to and understanding one's own emotions. Additionally, the strong associations between facets of emotional awareness and various forms of psychopathology may be partially attributable to associations with emotion regulation. These logically compelling hypotheses are largely uninvestigated, including which facets compose emotional awareness and how they relate to emotion regulation strategies and psychopathology. We used exploratory structural equation modeling of individual difference measures among a large adult sample (n = 919) recruited online. Results distinguished 4 facets of emotional awareness (type clarity, source clarity, involuntary attention to emotion, and voluntary attention to emotion) that were differentially associated with expressive suppression, acceptance of emotions, and cognitive reappraisal. Facets were associated with depression both directly and indirectly via associations with emotion regulation strategies. We discuss implications for theory and research on emotional awareness, emotion regulation, and psychopathology. (c) 2015 APA, all rights reserved).

Job Stress, Employee Health, and Organizational Effectiveness: A Facet Analysis, Model, and Literature Review.

Science.gov (United States)

Beehr, Terry A.; Newman, John E.

1978-01-01

The empirical research on job stress and employee health is reviewed within the context of six facets (environmental, personal, process, human consequences, organizational consequences, and time) of a seven facet conceptualization of the job stress-employee health research domain. Models are proposed for tying the facets together. (Author/SJL)

A practical scale for Multi-Faceted Organizational Health Climate Assessment.

Science.gov (United States)

Zweber, Zandra M; Henning, Robert A; Magley, Vicki J

2016-04-01

The current study sought to develop a practical scale to measure 3 facets of workplace health climate from the employee perspective as an important component of a healthy organization. The goal was to create a short, usable yet comprehensive scale that organizations and occupational health professionals could use to determine if workplace health interventions were needed. The proposed Multi-faceted Organizational Health Climate Assessment (MOHCA) scale assesses facets that correspond to 3 organizational levels: (a) workgroup, (b) supervisor, and (c) organization. Ten items were developed and tested on 2 distinct samples, 1 cross-organization and 1 within-organization. Exploratory and confirmatory factor analyses yielded a 9-item, hierarchical 3-factor structure. Tests confirmed MOHCA has convergent validity with related constructs, such as perceived organizational support and supervisor support, as well as discriminant validity with safety climate. Lastly, criterion-related validity was found between MOHCA and health-related outcomes. The multi-faceted nature of MOHCA provides a scale that has face validity and can be easily translated into practice, offering a means for diagnosing the shortcomings of an organization or workgroup's health climate to better plan health and well-being interventions. (c) 2016 APA, all rights reserved).

Bidirectional transfer between joint and individual actions in a task of discrete force production.

Science.gov (United States)

Masumoto, Junya; Inui, Nobuyuki

2017-07-01

The present study examined bidirectional learning transfer between joint and individual actions involving discrete isometric force production with the right index finger. To examine the effects of practice of joint action on performance of the individual action, participants performed a pre-test (individual condition), practice blocks (joint condition), and a post-test (individual condition) (IJI task). To examine the effects of practice of the individual action on performance during the joint action, the participants performed a pre-test (joint condition), practice blocks (individual condition), and a post-test (joint condition) (JIJ task). Whereas one participant made pressing movements with a target peak force of 10% maximum voluntary contraction (MVC) in the individual condition, two participants produced the target force of the sum of 10% MVC produced by each of them in the joint condition. In both the IJI and JIJ tasks, absolute errors and standard deviations of peak force were smaller post-test than pre-test, indicating bidirectional transfer between individual and joint conditions for force accuracy and variability. Although the negative correlation between forces produced by two participants (complementary force production) became stronger with practice blocks in the IJI task, there was no difference between the pre- and post-tests for the negative correlation in the JIJ task. In the JIJ task, the decrease in force accuracy and variability during the individual action did not facilitate complementary force production during the joint action. This indicates that practice performed by two people is essential for complementary force production in joint action.

Progress report for FACETS (Framework Application for Core-Edge Transport Simulations): C.S. SAP

Energy Technology Data Exchange (ETDEWEB)

Epperly, T W

2008-10-01

The mission of the Computer Science Scientific Application Partnership (C.S. SAP) at LLNL is to develop and apply leading-edge scientific component technology to FACETS software. Contributions from LLNL's fusion energy program staff towards the underlying physics modules are described in a separate report. FACETS uses component technology to combine selectively multiple physics and solver software modules written in different languages by different institutions together in an tightly-integrated, parallel computing framework for Tokamak reactor modeling. In the past fiscal year, the C.S. SAP has focused on two primary tasks: applying Babel to connect UEDGE into the FACETS framework through UEDGE's existing Python interface and developing a next generation componentization strategy for UEDGE which avoids the use of Python. The FACETS project uses Babel to solve its language interoperability challenges. Specific accomplishments for the year include: (1) Refined SIDL interfaces for UEDGE to meet satisfy the standard interfaces required by FACETS for all physics modules. This required consensus building between framework and UEDGE developers. (2) Wrote prototype C++ driver for UEDGE to demonstrate how UEDGE can be called from C++ using Babel. (3) Supported the FACETS project by adding new features to Babel such as release number tagging, porting to new machines, and adding new configuration options. Babel modifications were delivered to FACETS by testing and publishing development snapshots in the projects software repository. (4) Assisted Tech-X Corporation in testing and debugging of a high level build system for the complete FACETS tool chain--the complete list of third-party software libraries that FACETS depends on directly or indirectly (e.g., MPI, HDF5, PACT, etc.). (5) Designed and implemented a new approach to wrapping UEDGE as a FACETS component without requiring Python. To get simulation results as soon as possible, our initial connection from the

Progress report for FACETS (Framework Application for Core-Edge Transport Simulations): C.S. SAP

International Nuclear Information System (INIS)

Epperly, T.W.

2008-01-01

The mission of the Computer Science Scientific Application Partnership (C.S. SAP) at LLNL is to develop and apply leading-edge scientific component technology to FACETS software. Contributions from LLNL's fusion energy program staff towards the underlying physics modules are described in a separate report. FACETS uses component technology to combine selectively multiple physics and solver software modules written in different languages by different institutions together in an tightly-integrated, parallel computing framework for Tokamak reactor modeling. In the past fiscal year, the C.S. SAP has focused on two primary tasks: applying Babel to connect UEDGE into the FACETS framework through UEDGE's existing Python interface and developing a next generation componentization strategy for UEDGE which avoids the use of Python. The FACETS project uses Babel to solve its language interoperability challenges. Specific accomplishments for the year include: (1) Refined SIDL interfaces for UEDGE to meet satisfy the standard interfaces required by FACETS for all physics modules. This required consensus building between framework and UEDGE developers. (2) Wrote prototype C++ driver for UEDGE to demonstrate how UEDGE can be called from C++ using Babel. (3) Supported the FACETS project by adding new features to Babel such as release number tagging, porting to new machines, and adding new configuration options. Babel modifications were delivered to FACETS by testing and publishing development snapshots in the projects software repository. (4) Assisted Tech-X Corporation in testing and debugging of a high level build system for the complete FACETS tool chain--the complete list of third-party software libraries that FACETS depends on directly or indirectly (e.g., MPI, HDF5, PACT, etc.). (5) Designed and implemented a new approach to wrapping UEDGE as a FACETS component without requiring Python. To get simulation results as soon as possible, our initial connection from the FACETS

Surface Area of Patellar Facets: Inferential Statistics in the Iraqi Population

Directory of Open Access Journals (Sweden)

Ahmed Al-Imam

2017-01-01

Full Text Available Background. The patella is the largest sesamoid bone in the body; its three-dimensional complexity necessitates biomechanical perfection. Numerous pathologies occur at the patellofemoral unit which may end in degenerative changes. This study aims to test the presence of statistical correlation between the surface areas of patellar facets and other patellar morphometric parameters. Materials and Methods. Forty dry human patellae were studied. The morphometry of each patella was measured using a digital Vernier Caliper, electronic balance, and image analyses software known as ImageJ. The patellar facetal surface area was correlated with patellar weight, height, width, and thickness. Results. Inferential statistics proved the existence of linear correlation of total facetal surface area and patellar weight, height, width, and thickness. The correlation was strongest for surface area versus patellar weight. The lateral facetal area was found persistently larger than the medial facetal area, the p value was found to be <0.001 (one-tailed t-test for right patellae, and another significant p value of < 0.001 (one-tailed t-test was found for left patellae. Conclusion. These data are vital for the restoration of the normal biomechanics of the patellofemoral unit; these are to be consulted during knee surgeries and implant designs and can be of an indispensable anthropometric, interethnic, and biometric value.

Cross-cultural evidence for the two-facet structure of pride

Science.gov (United States)

Shi, Yan; Chung, Joanne M.; Cheng, Joey T.; Tracy, Jessica L.; Robins, Richard W.; Chen, Xiao; Zheng, Yong

2016-01-01

Across six studies conducted in Mainland China and South Korea, the present research extended prior findings showing that pride is comprised of two distinct conceptual and experiential facets in the U.S.: a pro-social, achievement-oriented “authentic pride”, and an arrogant, self-aggrandizing “hubristic pride”. This same two-facet structure emerged in Chinese participants’ semantic conceptualizations of pride (Study 1), Chinese and Koreans’ dispositional tendencies to experience pride (Studies 2, 3a, and 3b), Chinese and Koreans’ momentary pride experiences (Studies 3a, 3b, and 5), and Americans’ pride experiences using descriptors derived indigenously in Korea (Study 4). Together, these studies provide the first evidence that the two-facet structure of pride generalizes to cultures with highly divergent views of pride and self-enhancement processes from North America. PMID:27158171

Cross-cultural evidence for the two-facet structure of pride.

Science.gov (United States)

Shi, Yan; Chung, Joanne M; Cheng, Joey T; Tracy, Jessica L; Robins, Richard W; Chen, Xiao; Zheng, Yong

2015-04-01

Across six studies conducted in Mainland China and South Korea, the present research extended prior findings showing that pride is comprised of two distinct conceptual and experiential facets in the U.S.: a pro-social, achievement-oriented "authentic pride", and an arrogant, self-aggrandizing "hubristic pride". This same two-facet structure emerged in Chinese participants' semantic conceptualizations of pride (Study 1), Chinese and Koreans' dispositional tendencies to experience pride (Studies 2, 3a, and 3b), Chinese and Koreans' momentary pride experiences (Studies 3a, 3b, and 5), and Americans' pride experiences using descriptors derived indigenously in Korea (Study 4). Together, these studies provide the first evidence that the two-facet structure of pride generalizes to cultures with highly divergent views of pride and self-enhancement processes from North America.

Exploring the relationship between facets of mindfulness and eating pathology in women.

Science.gov (United States)

Lavender, Jason M; Gratz, Kim L; Tull, Matthew T

2011-01-01

Although researchers have examined the efficacy of acceptance- and mindfulness-based interventions in the treatment of eating disorders, few studies have explored the association between trait mindfulness and eating pathology. Therefore, the purpose of the current investigation was to examine the unique associations between multiple facets of mindfulness (acting with awareness, nonreactivity, nonjudgment, describing, and observing) and eating pathology. Undergraduate women (N = 276) completed the Eating Attitudes Test-26, the Five Facet Mindfulness Questionnaire, and the 21-item version of the Depression Anxiety Stress Scales. A hierarchical regression analysis revealed that four mindfulness facets (awareness, nonreactivity, nonjudgment, and describing) were uniquely associated with eating pathology above and beyond anxiety and depression symptoms. Results are discussed with regard to the potential role of various facets of trait mindfulness in eating pathology as well as the possible utility of mindfulness-based treatments for eating disorders.

Rotational injury of cervical facets: CT analysis of fracture patterns with implications for management and neurologic outcome.

Science.gov (United States)

Shanmuganathan, K; Mirvis, S E; Levine, A M

1994-11-01

Imaging studies of patients with rotational facet injuries of the cervical spine were retrospectively reviewed to determine the prevalence and pattern of associated fractures, to correlate injury pattern with recommended surgical stabilization, and to assess neurologic outcome. Radiographs and CT scans obtained for 40 consecutive patients with rotational facet injuries of the cervical spine during a 70-month period were retrospectively reviewed to determine injury level, presence, and orientation of facet fractures, and concurrent nonfacet injuries. Imaging findings were reviewed to assess the likelihood of instability and to determine the most appropriate stabilization requirement. Medical records were reviewed to ascertain mechanism of injury, initial neurologic deficit, and surgical findings. Among the 40 patients with cervical rotational facet injuries, 11 (27%) had pure unilateral facet dislocation or subluxation without associated fractures, and 29 (73%) had concurrent facet fractures involving the inferior facet of the rotated vertebra (n = 13), the superior facet of the subjacent vertebra (n = 9), or both (n = 7). Injury of the rotated vertebra was unilateral in 22 patients but bilateral in 18 patients. Facet fractures frequently extended into the ipsilateral lamina or articular pillar or both. An avulsion fracture from the posteroinferior aspect of the rotated vertebral body, indicating disk disruption, occurred in 10 patients (25%), and seven patients (17%) had complete isolation of an articular pillar. Facet fractures were confirmed for 27 patients who underwent surgical stabilization. Neurologic deficits developed in 29 (73%) of the 40 patients and included radiculopathy in 11 patients and cord syndromes in 18 patients. Pure dislocation without a facet fracture was more likely to lead to a cord syndrome (p = .006). Cervical rotational facet injuries are often accompanied by facet fractures and bilateral damage of the rotated vertebra. These injuries

Segmental translation after lumbar total disc replacement using Prodisc-L®: associated factors and relation to facet arthrosis.

Science.gov (United States)

Shin, Myung H; Ryu, Kyeong S; Rathi, Nitesh K; Park, Chun K

2017-02-01

Segmental translation after lumbar total disc replacement (TDR) with ProDisc-L® prosthesis frequently observed radiographic findings during follow-up period. However its precise pathomechanism and relation with facet arthrosis have not been investigated yet. This study was performed to evaluate possible factors that affect postoperative segmental translation and to identify its relation with facet joint degeneration after lumbar TDR using ProDisc-L® prosthesis. Thirty-five consecutive patients, who underwent lumbar TDR using ProDisc-L®, completed minimum 24 months follow-up. Segmental translation was assessed postoperatively at 1 month and at least at 24 months by using dynamic plain radiograph. Segmental translation was assessed in relation to patient age, sex, change of functional spinal unit (FSU) height, segmental range of motion (ROM), global lumbar ROM, implanted level, relative prosthesis size and prosthesis position. The comparison of segmental translation between progressive facet arthrosis (PFA) group and non-PFA group was also made. The mean segmental translation was 0.49±0.49 mm at 1 month after surgery and showed significant increase to 0.83±0.78 mm at last follow-up (P=0.014). Change of FSU height, segmental ROM, global lumbar ROM, implanted level and relative size of prosthesis were the significant factors among the variables related to segmental translation that authors assessed (P=0.032, P=0.000, P=0.001, P=0.046 and P=0.042, respectively). There was no significant intergroup difference of mean segmental translation between PFA group and non-PFA group (P=0.586). This study demonstrates that segmental translation after TDR using ProDisc-L® has significant relations with change of FSU height, segmental ROM, global lumbar ROM, implanted level and relative size of prosthesis. With the intergroup comparison, PFA group did not show significant higher segmental translation than non-PFA group.

Controlled synthesis and facets-dependent photocatalysis of TiO2 nanocrystals

Science.gov (United States)

Roy, Nitish; Park, Yohan; Sohn, Youngku; Pradhan, Debabrata

2015-04-01

Titanium dioxide (TiO2) is a wide band gap semiconductor that has been extensively used in several environmental applications including degradation of organic hazardous chemicals, water splitting to generate hydrogen, dye sensitized solar cells, self cleaning agents, and pigments. Herein we demonstrate the synthesis of TiO2 nanocrystals (NCs) with the shapes of ellipsoids, rods, cuboids, and sheets with different exposed facets using a noncorrosive and nontoxic chemical (i.e. diethanolamine) as the shape controlling agent, unlike hydrofluoric acid commonly used. The TiO2 NCs of diverse shapes with different exposed facets were tested for photocatalytic hydroxyl radical (OH•) formation, which determines their photocatalytic behavior and the results were compared with the standard P-25 Degussa. The formation rate of OH• per specific surface area was found to be >6 fold higher for rod-shaped TiO2 NCs than that of commercial Degussa P25 catalyst. The highest photocatalytic activity of rod-shaped TiO2 NCs is ascribed to the unique chemical environment of {010} exposed facets which facilitates the electron/hole separation in presence of {101} facets.

CO-CO coupling on Cu facets: Coverage, strain and field effects

International Nuclear Information System (INIS)

Sandberg, Robert B.; Montoya, Joseph H.; Chan, Karen; Nørskov, Jens K.

2016-01-01

We present a DFT study on the effect of coverage, strain, and electric field on CO-CO coupling energetics on Cu (100), (111), and (211). Our calculations indicate that CO-CO coupling is facile on all three facets in the presence of a cation-induced electric field in the Helmholtz plane, with the lowest barrier on Cu(100). The CO dimerization pathway is therefore expected to play a role in C_2 formation at potentials negative of the Cu potential of zero charge, corresponding to CO_2/CO reduction conditions at high pH. Both increased *CO coverage and tensile strain further improve C-C coupling energetics on Cu (111) and (211). Since CO dimerization is facile on all 3 Cu facets, subsequent surface hydrogenation steps may also play an important role in determining the overall activity towards C_2 products. Adsorption of *CO, *H, and *OH on the 3 facets were investigated with a Pourbaix analysis. Here, the (211) facet has the largest propensity to co-adsorb *CO and *H, which would favor surface hydrogenation following CO dimerization.

Faceting of stepped silicon (1 1 3) surfaces: Self assembly of nanoscale gratings

Science.gov (United States)

Mochrie, S. G. J.; Song, S.; Yoon, Mirang; Abernathy, D. L.; Stephenson, G. B.

1996-02-01

Synchrotron X-ray scattering studies of the phase behavior and phase transformations of stepped Si(113) surfaces tilted towards [001] are reviewed for temperatures between 300 and 1500 K. At the highest temperatures, these surfaces are uniformly stepped, and the intensity of near-specularly scattered X-rays increases with decreasing temperature. This is two-dimensional critical opalescence, which foreshadows a faceting transformation. At temperatures below the faceting transformation, (113) facets appear in coexistence with a stepped phase, leading to a mesoscopically grooved morphology. Both the misorientation angle at the phase boundary separating one- and two-phase regions and the intensity of the near-specular diffuse scattering may be described as power laws versus reduced temperature. This can be understood qualitatively on the basis of a mean-field theory, which incorporates an attractive interaction between steps. At lower temperatures, the surfaces are completely faceted, comprising (114) and (113) facets. The kinetics of faceting is also described. Following a quench from a one-phase region of the phase diagram into a two-phase region, the grooved superstructure forms and subsequently coarsens in time. For times between one and several hundred seconds, the surface morphology is self-similar at different times, with a characteristic groove size that evolves as a power law versus time. At later times, the groove size approaches a limiting value, as a result of elastic effects.

Joint shape segmentation with linear programming

KAUST Repository

Huang, Qixing

2011-01-01

We present an approach to segmenting shapes in a heterogenous shape database. Our approach segments the shapes jointly, utilizing features from multiple shapes to improve the segmentation of each. The approach is entirely unsupervised and is based on an integer quadratic programming formulation of the joint segmentation problem. The program optimizes over possible segmentations of individual shapes as well as over possible correspondences between segments from multiple shapes. The integer quadratic program is solved via a linear programming relaxation, using a block coordinate descent procedure that makes the optimization feasible for large databases. We evaluate the presented approach on the Princeton segmentation benchmark and show that joint shape segmentation significantly outperforms single-shape segmentation techniques. © 2011 ACM.

Patterns of astragalar fibular facet orientation in extant and fossil primates and their evolutionary implications.

Science.gov (United States)

Boyer, Doug M; Seiffert, Erik R

2013-07-01

A laterally sloping fibular facet of the astragalus (=talus) has been proposed as one of few osteological synapomorphies of strepsirrhine primates, but the feature has never been comprehensively quantified. We describe a method for calculating fibular facet orientation on digital models of astragali as the angle between the planes of the fibular facet and the lateral tibial facet. We calculated this value in a sample that includes all major extant primate clades, a diversity of Paleogene primates, and nonprimate euarchontans (n = 304). Results show that previous characterization of a divide between extant haplorhines and strepsirrhines is accurate, with little overlap even when individual data points are considered. Fibular facet orientation is conserved in extant strepsirrhines despite major differences in locomotion and body size, while extant anthropoids are more variable (e.g., low values for catarrhines relative to non-callitrichine platyrrhines). Euprimate outgroups exhibit a mosaic of character states with Cynocephalus having a more obtuse strepsirrhine-like facet and sampled treeshrews and plesiadapiforms having more acute haplorhine-like facets. Surprisingly, the earliest species of the adapiform Cantius have steep haplorhine-like facets as well. We used a Bayesian approach to reconstruct the evolution of fibular facet orientation as a continuous character across a supertree of living and extinct primates. Mean estimates for crown Primatomorpha (97.9°), Primates (99.5°), Haplorhini (98.7°), and Strepsirrhini (108.2°) support the hypothesis that the strepsirrhine condition is derived, while lower values for crown Anthropoidea (92.8°) and Catarrhini (88.9°) are derived in the opposite direction. Copyright © 2013 Wiley Periodicals, Inc.

FACET: A simulation software framework for modeling complex societal processes and interactions

Energy Technology Data Exchange (ETDEWEB)

Christiansen, J. H.

2000-06-02

FACET, the Framework for Addressing Cooperative Extended Transactions, was developed at Argonne National Laboratory to address the need for a simulation software architecture in the style of an agent-based approach, but with sufficient robustness, expressiveness, and flexibility to be able to deal with the levels of complexity seen in real-world social situations. FACET is an object-oriented software framework for building models of complex, cooperative behaviors of agents. It can be used to implement simulation models of societal processes such as the complex interplay of participating individuals and organizations engaged in multiple concurrent transactions in pursuit of their various goals. These transactions can be patterned on, for example, clinical guidelines and procedures, business practices, government and corporate policies, etc. FACET can also address other complex behaviors such as biological life cycles or manufacturing processes. To date, for example, FACET has been applied to such areas as land management, health care delivery, avian social behavior, and interactions between natural and social processes in ancient Mesopotamia.

Joint Coding/Decoding for Multi-message HARQ

OpenAIRE

Benyouss , Abdellatif; Jabi , Mohammed; Le Treust , Maël; Szczecinski , Leszek

2016-01-01

International audience; In this work, we propose and investigate a new coding strategy devised to increase the throughput of hybrid ARQ (HARQ) transmission over block fading channel. In our proposition, the transmitter jointly encodes a variable number of bits for each round of HARQ. The parameters (rates) of this joint coding can vary and may be based on the negative acknowledgment (NACK) signals provided by the receiver or, on the past (outdated) information about the channel states. The re...

Sacroiliac joint pain: Prospective, randomised, experimental and comparative study of thermal radiofrequency with sacroiliac joint block.

Science.gov (United States)

Cánovas Martínez, L; Orduña Valls, J; Paramés Mosquera, E; Lamelas Rodríguez, L; Rojas Gil, S; Domínguez García, M

2016-05-01

To compare the analgesic effects between the blockade and bipolar thermal radiofrequency in the treatment of sacroiliac joint pain. Prospective, randomised and experimental study conducted on 60 patients selected in the two hospitals over a period of nine months, who had intense sacroiliac joint pain (Visual Analogue Scale [VAS]>6) that lasted more than 3 months. Patients were randomised into three groups (n=20): Group A (two intra-articular sacroiliac injections of local anaesthetic/corticosteroid guided by ultrasound in 7 days). Group B: conventional bipolar radiofrequency "palisade". Target points were the lateral branch nerves of S1, S2, and S3, distance needles 1cm. Group C: modified bipolar radiofrequency "palisade" (needle distance >1cm). Patients were evaluated at one month, three months, and one year. Demographic data, VAS reduction, and side effects of the techniques were assessed. One month after the treatment, pain reduction was >50% in the three groups PDolor. Publicado por Elsevier España, S.L.U. All rights reserved.

The HEXACO correlates of authoritarianism's facets in the U.S. and Denmark

DEFF Research Database (Denmark)

Liu, Jie; Ludeke, Steven G.; Zettler, Ingo

2017-01-01

was the predictable differences in the relations the facets had with Honesty-Humility, which was more positively related to conventionalism than authoritarian aggression in the U.S. sample, but not in the Danish sample. Interestingly, the U.S. sample scored significantly higher in authoritarianism and its facets than...

High heat flux performance of W-Eurofer brazed joints

Science.gov (United States)

de Prado, J.; Sánchez, M.; Wirtz, M.; Pintsuk, G.; Du, J.; Linke, J.; Ureña, A.

2018-02-01

The qualification process of the materials and components for the next generation of fusion reactors makes it necessary to expose them to similar service conditions as expected during the service life of the reactor. In the present work, W-Eurofer brazed joints (tungsten block: 8 × 8 × 4 mm; steel block: 8 × 8 × 4 mm; joined to an actively cooled copper heat sink) were exposed to steady state heat loads to study the effect of the thermal fatigue on their microstructure and mechanical integrity. Three different W surface temperatures were tested (400, 500 and 600 °C) varying the number of applied cycles (100 and 1000). The results allowed identifying a braze temperature of 359 °C as threshold condition under which the brazed joints could be used without deterioration. The increase of the surface temperature deteriorated the mechanical integrity of the joints in comparison to those analyzed after the brazing process and accordingly reduced the refrigeration capabilities.

An Examination of the Multi-Faceted Motivation System in Healthy Young Adults

Directory of Open Access Journals (Sweden)

Susana Da Silva

2018-05-01

Full Text Available Background: Amotivation is a prevalent symptom in schizophrenia (SZ and depression (MDD, and is linked to poor functional outcomes in affected individuals. Conceptualizations of motivation have outlined a multi-faceted construct comprised of reward responsiveness, reward expectancy, reward valuation, effort valuation, and action selection/preference-based decision making. To date, findings from studies utilizing variable-centered approaches to examining isolated facets of motivation in SZ and MDD have been inconsistent. Thus, the present study adopted a person-centered approach, and comprehensively examined the reward system in a non-clinical sample in an attempt to explore potential subtypes of motivation impairments, while minimizing the effects of illness-related confounds.Methods: Ninety-six healthy undergraduate students were evaluated for amotivation, schizotypal traits, depressive symptoms, and cognition, and administered objective computerized tasks to measure the different facets of motivation. Cluster analysis was performed to explore subgroups of individuals based on similar motivation task performance. Additionally, correlational analyses were conducted in order to examine inter-relationships between motivation facets, and relations between clinical measures and facets of motivation.Results: Cluster analysis identified two subgroups of individuals with differential motivation performance profiles. Correlational analyses revealed that reward responsiveness was associated with amotivation, depressive symptoms, and negative schizotypy. Further, significant inter-correlations were found between reward responsiveness and reward expectancy, as well as between reward valuation and effort valuation.Conclusions: Our results mark important steps forward in understanding motivation in a non-clinical sample, and guide future dimensional and comprehensive analyses of the multi-faceted reward system. It remains to be seen whether these patterns of

An Examination of the Multi-Faceted Motivation System in Healthy Young Adults.

Science.gov (United States)

Da Silva, Susana; Apatsidou, Areti; Saperia, Sarah; Siddiqui, Ishraq; Jeffay, Eliyas; Voineskos, Aristotle N; Daskalakis, Zafiris J; Remington, Gary; Zakzanis, Konstantine K; Foussias, George

2018-01-01

Background: Amotivation is a prevalent symptom in schizophrenia (SZ) and depression (MDD), and is linked to poor functional outcomes in affected individuals. Conceptualizations of motivation have outlined a multi-faceted construct comprised of reward responsiveness, reward expectancy, reward valuation, effort valuation, and action selection/preference-based decision making. To date, findings from studies utilizing variable-centered approaches to examining isolated facets of motivation in SZ and MDD have been inconsistent. Thus, the present study adopted a person-centered approach, and comprehensively examined the reward system in a non-clinical sample in an attempt to explore potential subtypes of motivation impairments, while minimizing the effects of illness-related confounds. Methods: Ninety-six healthy undergraduate students were evaluated for amotivation, schizotypal traits, depressive symptoms, and cognition, and administered objective computerized tasks to measure the different facets of motivation. Cluster analysis was performed to explore subgroups of individuals based on similar motivation task performance. Additionally, correlational analyses were conducted in order to examine inter-relationships between motivation facets, and relations between clinical measures and facets of motivation. Results: Cluster analysis identified two subgroups of individuals with differential motivation performance profiles. Correlational analyses revealed that reward responsiveness was associated with amotivation, depressive symptoms, and negative schizotypy. Further, significant inter-correlations were found between reward responsiveness and reward expectancy, as well as between reward valuation and effort valuation. Conclusions: Our results mark important steps forward in understanding motivation in a non-clinical sample, and guide future dimensional and comprehensive analyses of the multi-faceted reward system. It remains to be seen whether these patterns of results will

Posterior longitudinal ligament status in cervical spine bilateral facet dislocations

International Nuclear Information System (INIS)

Carrino, John A.; Manton, Geoffrey L.; Morrison, William B.; Flanders, Adam E.; Vaccaro, Alex R.; Schweitzer, Mark E.

2006-01-01

It is generally accepted that cervical spine bilateral facet dislocation results in complete disruption of the posterior longitudinal ligament. The goal of this study was to evaluate the integrity of numerous spine-stabilizing structures by MRI, and to determine if any associations between injury patterns exist with respect to the posterior longitudinal ligament status. Retrospective case series. A retrospective review was performed of 30 cervical spine injury subjects with bilateral facet dislocation. Assessment of 1.5T MRI images was carried out for: intervertebral disc disruption, facet fracture, and ligamentous disruption. Statistical analyses were performed to evaluate for associations between various injury patterns and posterior longitudinal ligament status. The frequency of MRI abnormalities was: anterior longitudinal ligament disruption (26.7%), disc herniation or disruption (90%), posterior longitudinal ligament disruption (40%), facet fracture (63.3%) and disruption of the posterior column ligament complex (97%). There were no significant associations between injury to the posterior longitudinal ligament and other structures. Compared to surgical reports, MRI was accurate for determining the status for 24 of 26 ligaments (three of three anterior longitudinal ligament, seven of nine posterior longitudinal ligament, and 14 of 14 posterior column ligament complex) but generated false negatives in two instances (in both MRI showed an intact posterior longitudinal ligament that was torn at surgery). (orig.)

Dioptrics of the facet lenses in the dorsal rim area of the cricket Gryllus bimaculatus

NARCIS (Netherlands)

Ukhanov, KY; Leertouwer, HL; Gribakin, FG; Stavenga, DG

1996-01-01

1. The optics of the corneal facet lenses from the dorsal rim area (DRA) and from the dorso-lateral areas (DA) of the compound eye of the cricket Gryllus bimaculatus were studied. 2. The DRA of the cricket eye contains quite normally shaped facet lenses. The diameter of the facet lens in the DA is

A novel closed reduction with extension block and flexion block using Kirschner wires and microscrew fixation for mallet fractures.

Science.gov (United States)

Shimura, Haruhiko; Wakabayashi, Yoshiaki; Nimura, Akimoto

2014-03-01

Some patients with mallet fractures who undergo extension block pinning complain of exposed wires, which delay their return to sports and causes inconvenience while performing tasks that require the use of hands during the early postoperative period. The purpose of this retrospective study was to present and evaluate a novel surgical procedure for mallet fractures. We treated 20 patients (14 males and six females; mean age, 38.4 years; range 17-68 years) with displaced mallet fractures involving >30 % of the articular surface using the closed reduction and microscrew fixation between January 2009 and January 2012. The distal interphalangeal joint (DIP) joint was immobilized with a splint for 1-3 weeks on an individual case basis. According to Wehbe and Schneider's classification, there were 12 type IB, six type IIB, and two type IA fractures. The mean follow-up duration was 12.6 months (range 6-31 months). Bone union was achieved in all patients within a mean period of 6.8 weeks, with no incidence of infection, skin necrosis, permanent nail deformity, or secondary osteoarthritis. Only two complications-temporary nail ridging in one patient and a dorsal bump caused by the screw in one patient-were observed. Minimum postoperative displacement was observed in one patient, for whom immobilization with a splint was continued for 4 weeks. Articular incongruity was <1.0 mm in four patients and 1.0-2.0 mm in two patients. Mean DIP joint extension loss was 6.5° and mean flexion was 67.8°. The surgical outcomes were excellent in seven patients, good in nine, and fair in four according to Crawford's evaluation criteria. Our novel surgical procedure combining closed reduction with extension block and flexion block using Kirschner wires and microscrew fixation produces good clinical results with relatively few complications.

Influence of the austenitizing temperature in the cleavage facet size of Niocor 2

International Nuclear Information System (INIS)

Darwish, F.A.I.; Teixeira, J.C.G.; Fernandes, R.A.; Juer, S.

1983-01-01

Convetional Charpy specimens of Niocor 2 steel cooled in air from various austenitizing temperatures were fractured at -196 0 C so as to insure failure by cleavage. The cleavage facet size distribution was determined and then correlated with the grain size and other aspects of the microstructure. The results that the average facet size can be increased through a coarsening of the microstructure. For the case where the γ→α transformation products are predominantely acicular, the facet size is shown to depend on substructural aspects primarily the lath packet size. (Author) [pt

Contact characteristics of the subtalar joint after a simulated calcaneus fracture.

Science.gov (United States)

Sangeorzan, B J; Ananthakrishnan, D; Tencer, A F

1995-06-01

A simple calcaneus fracture consisting of two parts was modeled in nine fresh cadaver hindfoot specimens to assess changes in subtalar joint contact characteristics with increasing plantar depression of the posterolateral fracture component. To perform the experiment, rods were placed in the tibial and fibular shafts of each specimen, which was mounted in a frame in neutral stance. A pneumatic cylinder was used to deliver a vertical compressive load through the rods into the foot while permitting free motion of the foot in the horizontal plane. Sealed packets of pressure-sensitive film were inserted into the anterior-middle and posterior facets of the talocalcaneal articulation, and a 700-N load was applied. After testing of the intact foot, a primary fracture line was created using a microoscillating saw. The osteotomized posterolateral component was anatomically reduced and fixed, the film inserted, and the load reapplied. The test was repeated after the posterolateral fragment was displaced 2, 5, and 10 mm in a plantar direction. The resulting pressure prints were scanned along with pressure/color density calibration strips using a flat-bed scanner, and an image analysis system was used to determine contact areas within specified pressure intervals. The contact area (> 0.5 MPa) of the posterior facet was significantly decreased with 2, 5, and 10 mm displacements of the posterolateral calcaneus fracture component. The ratio of high-pressure area (< 5.0 MPa) to contact area in the posterior facet was significantly increased only with displacements of 5 and 10 mm. There were no significant changes in any contact parameters in the anterior-middle facet.(ABSTRACT TRUNCATED AT 250 WORDS)

On the relative importance of bending and compression in cervical spine bilateral facet dislocation.

Science.gov (United States)

Nightingale, Roger W; Bass, Cameron R; Myers, Barry S

2018-03-08

Cervical bilateral facet dislocations are among the most devastating spine injuries in terms of likelihood of severe neurological sequelae. More than half of patients with tetraparesis had sustained some form of bilateral facet fracture dislocation. They can occur at any level of the sub-axial cervical spine, but predominate between C5 and C7. The mechanism of these injuries has long been thought to be forceful flexion of the chin towards the chest. This "hyperflexion" hypothesis comports well with intuition and it has become dogma in the clinical literature. However, biomechanical studies of the human cervical spine have had little success in producing this clinically common and devastating injury in a flexion mode of loading. The purpose of this manuscript is to review the clinical and engineering literature on the biomechanics of bilateral facet dislocations and to describe the mechanical reasons for the causal role of compression, and the limited role of head flexion, in producing bilateral facet dislocations. Bilateral facet dislocations have only been produced in experiments where compression is the primary loading mode. To date, no biomechanical study has produced bilateral facet dislocations in a whole spine by bending. Yet the notion that it is primarily a hyper-flexion injury persists in the clinical literature. Compression and compressive buckling are the primary causes of bilateral facet dislocations. It is important to stop using the hyper-flexion nomenclature to describe this class of cervical spines injuries because it may have a detrimental effect on designs for injury prevention. Copyright © 2018 Elsevier Ltd. All rights reserved.

Improving personality facet scores with multidimensional computer adaptive testing: an illustration with the Neo Pi-R

NARCIS (Netherlands)

Makransky, Guido; Mortensen, Erik Lykke; Glas, Cornelis A.W.

2013-01-01

Narrowly defined personality facet scores are commonly reported and used for making decisions in clinical and organizational settings. Although these facets are typically related, scoring is usually carried out for a single facet at a time. This method can be ineffective and time consuming when

Big Five Personality Factors and Facets as Predictors of Openness to Diversity.

Science.gov (United States)

Han, Suejung; Pistole, M Carole

2017-11-17

Openness to diversity is a crucial component of cultural competence needed in the increasingly diversified modern society and a necessary condition for benefitting from diversity contacts and interventions (e.g., diversity training, cultural courses). Responding to the recent call for more research on personality and its relation to diversity outcomes, we examined the associations between Big Five personality (i.e., Openness to Experience, Agreeableness, Extraversion, Neuroticism, and Conscientiousness) higher order factors and lower order facets and universal-diverse orientation (i.e., open attitude of appreciating human universality and diversity; Miville et al., 1999 ). In the Study 1 (N = 338) web survey on Big Five factors, Openness to Experience and Agreeableness were associated with universal-diverse orientation significantly. In the Study 2 (N = 176) paper survey on both Big Five factors and facets, Openness to Experience, low Neuroticism, and Conscientiousness, and various lower-order facets of all the Big Five personality were associated with universal-diverse orientation significantly. Practical implications were suggested on how personality facets could be incorporated into current diversity interventions to enhance their effectiveness of promoting openness to diversity.

Unique relationships between facets of mindfulness and eating pathology among female smokers.

Science.gov (United States)

Adams, Claire E; Apperson McVay, Megan; Kinsaul, Jessica; Benitez, Lindsay; Vinci, Christine; Stewart, Diana W; Copeland, Amy L

2012-12-01

Female smokers often have higher levels of eating disorder symptoms than non-smokers, and concerns about eating and weight might interfere with smoking cessation. Thus, it is critical to identify factors to promote healthier eating and body image in this population. Initial research suggests that specific aspects of trait mindfulness predict lower body dissatisfaction and eating disorder symptoms among non-smokers. However, these relationships are unknown among smokers. The current study examined associations between facets of trait mindfulness and eating disorder symptoms in 112 college female smokers (83% Caucasian; mean age 20 years, SD=1.69). After controlling for relevant sociodemographic variables, Describing and Nonjudging facets of mindfulness predicted lower bulimic symptoms and body dissatisfaction (psmindfulness facets are related to lower eating disorder symptoms among smokers, whereas other facets are not associated or have a positive relationship with these symptoms. Mindfulness-based interventions focusing on Describing, Nonjudging, and Acting with Awareness may help to reduce eating pathology among female smokers, which could potentially improve smoking cessation rates in this population. Copyright © 2012 Elsevier Ltd. All rights reserved.

Moisture transport properties of mortar and mortar joint: A NMR study

OpenAIRE

Brocken, H.J.P.; Adant, O.C.G.; Pel, L.

1997-01-01

The moisture transport in mortar and mortar joint often is an important parameter in degeneration of brick masonry and other block constructions. In this study, the influence of single additives on the moisture transport properties of mortar is investigated. Due to water extraction during brick laying, curing conditions of mortar in mortar joint differ from curing conditions of separately cured mortar. Consequently, the moisture transport properties of mortar joint differ. In addition to the ...

Moisture transport properties of mortar and mortar joint: a NMR study

OpenAIRE

Brocken, H.J.P.; Adan, O.C.G.; Pel, L.

1997-01-01

The moisture transport in mortar and mortar joint often is an important parameter in degeneration of brick masonry and other block constructions. In this study, the influence of single additives on the moisture transport properties of mortar is investigated. Due to water extraction during brick laying, curing conditions of mortar in mortar joint differ from curing conditions of separately cured mortar. Consequently, the moisture transport properties of mortar joint differ. In addition to the ...

Trait and facet-level predictors of first-onset depressive and anxiety disorders in a community sample of adolescent girls.

Science.gov (United States)

Goldstein, Brandon L; Kotov, Roman; Perlman, Greg; Watson, David; Klein, Daniel N

2017-09-20

Individual differences in neuroticism, extraversion, and conscientiousness are associated with, and may predict onset of, internalizing disorders. These general traits can be parsed into facets, but there is a surprising paucity of research on facet risk for internalizing disorders. We examined general traits and facets of neuroticism, extraversion, and conscientiousness in predicting first onsets of depressive and anxiety disorders. A community sample of 550 adolescent females completed general and facet-level personality measures and diagnostic interviews. Interviews were re-administered 18 months later. First onsets of depressive disorders were predicted by neuroticism, extraversion, and conscientiousness. Facets predicting first onset of depression included depressivity (neuroticism facet) and lower positive emotionality and sociability (extraversion facets). First onsets of generalized anxiety disorder (GAD) were predicted by neuroticism, and particularly the facet of anxiousness. First onsets of social phobia were predicted at the facet level by anxiousness. First onsets of specific phobia were predicted by neuroticism, low conscientiousness, and all neuroticism facets. In multivariate analyses, first onsets of depression were uniquely predicted by depressivity, and onsets of GAD and social phobia were uniquely predicted by anxiousness over and above the general trait of neuroticism. General traits predict first onsets of depressive and anxiety disorders. In addition, more specific associations are evident at the facet level. Facets can refine our understanding of the links between personality and psychopathology risk, and provide finer-grained targets for personality-informed interventions.

Framework Application for Core Edge Transport Simulation (FACETS)

Energy Technology Data Exchange (ETDEWEB)

Krasheninnikov, Sergei; Pigarov, Alexander

2011-10-15

The FACETS (Framework Application for Core-Edge Transport Simulations) project of Scientific Discovery through Advanced Computing (SciDAC) Program was aimed at providing a high-fidelity whole-tokamak modeling for the U.S. magnetic fusion energy program and ITER through coupling separate components for each of the core region, edge region, and wall, with realistic plasma particles and power sources and turbulent transport simulation. The project also aimed at developing advanced numerical algorithms, efficient implicit coupling methods, and software tools utilizing the leadership class computing facilities under Advanced Scientific Computing Research (ASCR). The FACETS project was conducted by a multi-discipline, multi-institutional teams, the Lead PI was J.R. Cary (Tech-X Corp.). In the FACETS project, the Applied Plasma Theory Group at the MAE Department of UCSD developed the Wall and Plasma-Surface Interaction (WALLPSI) module, performed its validation against experimental data, and integrated it into the developed framework. WALLPSI is a one-dimensional, coarse grained, reaction/advection/diffusion code applied to each material boundary cell in the common modeling domain for a tokamak. It incorporates an advanced model for plasma particle transport and retention in the solid matter of plasma facing components, simulation of plasma heat power load handling, calculation of erosion/deposition, and simulation of synergistic effects in strong plasma-wall coupling.

Influence of higher order modes on angled-facet amplifiers

DEFF Research Database (Denmark)

Wang, Z.; Mikkelsen, B.; Stubkjær, Kristian

1991-01-01

The influence of the first-order mode on the residual reflectivity of angled-facet amplifiers is analyzed. For a 7 degrees angled-facet ridge waveguide amplifier with a single-layer antireflective (AR) coating, a gain ripple lower than 1-dB at 25-dB gain can be obtained independent...... of the polarization, even in the presence of a first-order mode with a 15-dB gain. The tolerances for the thickness and refractive index of the AR coating are reduced by a factor of three compared to operation in the fundamental mode only. The influence of the higher order mode can virtually be suppressed...

b-tree facets for the simple graph partitioning polytope

DEFF Research Database (Denmark)

Sørensen, Michael Malmros

2004-01-01

The simple graph partitioning problem is to partition an edge-weighted graph into mutually disjoint subgraphs, each consisting of no more than b nodes, such that the sum of the weights of all edges in the subgraphs is maximal. In this paper we introduce a large class of facet defining inequalities...... for the simple graph partitioning polytopes P_n(b), b >= 3, associated with the complete graph on n nodes. These inequalities are induced by a graph configuration which is built upon trees of cardinality b. We provide a closed-form theorem that states all necessary and sufficient conditions for the facet...... defining property of the inequalities. Udgivelsesdato: JUN...

The potential impact of various diagnostic strategies in cases of chronic pain syndromes associated with lumbar spine degeneration

Directory of Open Access Journals (Sweden)

Bokov A

2013-04-01

Full Text Available Andrey Bokov, Olga Perlmutter, Alexander Aleynik, Marina Rasteryaeva, Sergey Mlyavykh Scientific Research Institute of Traumatology and Orthopedics, Nizhniy Novgorod, Russian Federation Purpose: To study the possible effects of various diagnostic strategies and the relative contribution of various structures in order to determine the optimal diagnostic strategy in treating patients with noncompressive pain syndromes. Study design: Prospective, nonrandomized cohort study of 83 consecutive patients with noncompressive pain syndromes resistant to repeated courses of conservative treatment. The follow-up period was 18 months. Results: Nucleoplasty was effective in cases of discogenic pain; the consequences related to false positive results of the discography were significant. The most specific criterion was 80% pain relief after facet joint blocks, whereas 50% pain relief and any subjective pain relief were not associated with a significant increase in the success rate. A considerable rate of false negative results was associated with 80% pain relief, whereas 50% pain relief after facet joint blocks showed the optimal ratio of sensitivity and specificity. Facet joint pain was detected in 50.6% of cases (95% confidence interval 44.1%–66.3%, discogenic pain in 16.9% cases (95% confidence interval 9.5%–26.7%, and sacroiliac joint pain in 7.2% cases (95% confidence interval 2.7%–15%. It was impossible to differentiate the main source of pain in 25.3% of cases. Conclusion: It is rational to adjust the diagnostic algorithm to the probability of detecting a particular pain source and, in doing so, reduce the number of invasive diagnostic measures to evaluate a pain source. False positive results of diagnostic measures can negatively affect the overall efficacy of a particular technology; therefore, all reasons for the failure should be studied in order to reach an unbiased conclusion. In choosing diagnostic criteria, not only should the success rate

What’s in a word? : Rethinking facet headings in a discovery service

Directory of Open Access Journals (Sweden)

David Nelson

2015-06-01

Full Text Available The emergence of Discovery systems has been well received by libraries who have long been concerned with offering a smorgasbord of databases that require either individual searching of databases or the problematic use of federated searching.  The ability to search across a wide array of subscribed and open-access information resources via a centralized index has opened up access for users to a library’s wealth of information resources.  This capability has been particularly praised for its ‘google like’ search interface, thereby conforming to user expectations for information searching.  Yet, all discovery services also include facets as a search capability and thus provide faceted navigation which is a search feature that Google is not particularly well suited for.  Discovery services thus provide a hybrid search interface.  An examination of e-commerce sites clearly shows that faceted navigation is an integral part of their discovery systems.  Many library OPACs also now are being developed with faceted navigation capabilities.  However, the discovery services faceted structures suffer from a number of problems which inhibit their usefulness and their potential.  This article examines a number of these issues and it offers suggestions for improving the discovery search interface.  It also argues that vendors and libraries need to work together to more closely analyze the user experience of the discovery system.

Preliminary Conceptual Design Report for the FACET-II Project at SLAC National Accelerator Laboratory

Energy Technology Data Exchange (ETDEWEB)

Hogan, Mark [SLAC National Accelerator Lab., Menlo Park, CA (United States)

2016-04-22

Plasma wakefield acceleration has the potential to dramatically shrink the size and cost of particle accelerators. Research at the SLAC National Accelerator Laboratory has demonstrated that plasmas can provide 1,000 times the acceleration in a given distance compared with current technologies. Developing revolutionary and more efficient acceleration techniques that allow for an affordable high-energy collider is the focus of FACET, a National User Facility at SLAC. The existing FACET National User Facility uses part of SLAC’s two-mile-long linear accelerator to generate high-density beams of electrons and positrons. FACET-II is a new test facility to develop advanced acceleration and coherent radiation techniques with high-energy electron and positron beams. It is the only facility in the world with high energy positron beams. FACET-II provides a major upgrade over current FACET capabilities and the breadth of the potential research program makes it truly unique. It will synergistically pursue accelerator science that is vital to the future of both advanced acceleration techniques for High Energy Physics, ultra-high brightness beams for Basic Energy Science, and novel radiation sources for a wide variety of applications. The design parameters for FACET-II are set by the requirements of the plasma wakefield experimental program. To drive the plasma wakefield requires a high peak current, in excess of 10kA. To reach this peak current, the electron and positron design bunch size is 10μ by 10μ transversely with a bunch length of 10μ. This is more than 200 times better than what has been achieved at the existing FACET. The beam energy is 10 GeV, set by the Linac length available and the repetition rate is up to 30 Hz. The FACET-II project is scheduled to be constructed in three major stages. Components of the project discussed in detail include the following: electron injector, bunch compressors and linac, the positron system, the Sector 20 sailboat and W chicanes

Polygons and Faceted Polyhedra and Nanoporous Networks.

Science.gov (United States)

Lu, Jianjiang; Mondal, Arunendu; Moulton, Brian; Zaworotko, Michael J

2001-06-01

Small rhombihexahedra and small cubicuboctahedra, namely faceted polyhedra, form the basis of two novel low-density framework solids that are afforded by the self-assembly of molecular squares only or molecular squares and triangles, respectively. © 2001 WILEY-VCH Verlag GmbH, Weinheim, Fed. Rep. of Germany.

Sensing the facet orientation in silver nano-plates using scanning Kelvin probe microscopy in air

Energy Technology Data Exchange (ETDEWEB)

Abdellatif, M.H. [Department of Nanostructures, Istituto Italiano di Tecnologia, via Morego 30, I-16163 Genova (Italy); Physics Department, National Research Center, Elbehoos st., 12622, Dokki, Giza (Egypt); Salerno, M., E-mail: marco.salerno@iit.it [Department of Nanophysics, Istituto Italiano di Tecnologia, via Morego 30, I-16163 Genova (Italy); Polovitsyn, Anatolii [Department of Nanochemistry, Istituto Italiano di Tecnologia, via Morego 30, I-16163 Genova (Italy); Dipartimentodi Fisica, Università di Genova, via Dodecaneso 33, I-16146 Genova (Italy); Marras, Sergio [Department of Nanochemistry, Istituto Italiano di Tecnologia, via Morego 30, I-16163 Genova (Italy); De Angelis, Francesco [Department of Nanostructures, Istituto Italiano di Tecnologia, via Morego 30, I-16163 Genova (Italy)

2017-05-01

Highlights: • The surface potential of drop cast nanocrystals was measured by SKPM in ambient air. • The nanocrystal facet work function was derived by theory. • By comparing theory and experiment we distinguished the nanocrystal facets. • Nanocrystal facet control is of practical interest for optoelectronic devices. - Abstract: The work function of nano-materials is important for a full characterization of their electronic properties. Because the band alignment, band bending and electronic noise are very sensitive to work function fluctuations, the dependence of the work function of nano-scale crystals on facet orientation can be a critical issue in optimizing optoelectronic devices based on these materials. We used scanning Kelvin probe microscopy to assess the local work function on samples of silver nano-plates at sub-micrometric spatial resolution. With the appropriate choice of the substrate and based on statistical analysis, it was possible to distinguish the surface potential of the different facets of silver nano-plates even if the measurements were done in ambient conditions without the use of vacuum. A phenomenological model was used to calculate the differences of facet work function of the silver nano-plates and the corresponding shift in Fermi level. This theoretical prediction and the experimentally observed difference in surface potential on the silver nano-plates were in good agreement. Our results show the possibility to sense the nano-crystal facets by appropriate choice of the substrate in ambient conditions.

Sensing the facet orientation in silver nano-plates using scanning Kelvin probe microscopy in air

International Nuclear Information System (INIS)

Abdellatif, M.H.; Salerno, M.; Polovitsyn, Anatolii; Marras, Sergio; De Angelis, Francesco

2017-01-01

Highlights: • The surface potential of drop cast nanocrystals was measured by SKPM in ambient air. • The nanocrystal facet work function was derived by theory. • By comparing theory and experiment we distinguished the nanocrystal facets. • Nanocrystal facet control is of practical interest for optoelectronic devices. - Abstract: The work function of nano-materials is important for a full characterization of their electronic properties. Because the band alignment, band bending and electronic noise are very sensitive to work function fluctuations, the dependence of the work function of nano-scale crystals on facet orientation can be a critical issue in optimizing optoelectronic devices based on these materials. We used scanning Kelvin probe microscopy to assess the local work function on samples of silver nano-plates at sub-micrometric spatial resolution. With the appropriate choice of the substrate and based on statistical analysis, it was possible to distinguish the surface potential of the different facets of silver nano-plates even if the measurements were done in ambient conditions without the use of vacuum. A phenomenological model was used to calculate the differences of facet work function of the silver nano-plates and the corresponding shift in Fermi level. This theoretical prediction and the experimentally observed difference in surface potential on the silver nano-plates were in good agreement. Our results show the possibility to sense the nano-crystal facets by appropriate choice of the substrate in ambient conditions.

A facet approach to extending the normative component of the theory of reasoned action.

Science.gov (United States)

Donald, I; Cooper, S R

2001-12-01

Using facet theory, this study addresses the weak explanatory power of normative influence in theories of reasoned action or planned behaviour. A broad normative construct is hypothesized as being characterized by two facets--social unit and behavioural modality--each of which is examined in relation to recreational drug use. A questionnaire was developed from the facets and administered to undergraduate students. Data (N = 181) were analysed using Smallest Space Analysis (SSA). The results suggest that the facets provide an adequate description of the normative construct and that personal and social normative beliefs, behavioural norms and behavioural intentions can be distinguished empirically. The results also lend partial support to Ajzen's (1988; Ajzen & Fishbein, 1977) principle of compatibility. Implications for how social influence is operationalized and conceptualized are also discussed.

An investigation into the validity of cervical spine motion palpation using subjects with congenital block vertebrae as a 'gold standard'

Directory of Open Access Journals (Sweden)

Peterson Cynthia K

2004-06-01

Full Text Available Abstract Background Although the effectiveness of manipulative therapy for treating back and neck pain has been demonstrated, the validity of many of the procedures used to detect joint dysfunction has not been confirmed. Practitioners of manual medicine frequently employ motion palpation as a diagnostic tool, despite conflicting evidence regarding its utility and reliability. The introduction of various spinal models with artificially introduced 'fixations' as an attempt to introduce a 'gold standard' has met with frustration and frequent mechanical failure. Because direct comparison against a 'gold standard' allows the validity, specificity and sensitivity of a test to be calculated, the identification of a realistic 'gold standard' against which motion palpation can be evaluated is essential. The objective of this study was to introduce a new, realistic, 'gold standard', the congenital block vertebra (CBV to assess the validity of motion palpation in detecting a true fixation. Methods Twenty fourth year chiropractic students examined the cervical spines of three subjects with single level congenital block vertebrae, using two commonly employed motion palpation tests. The examiners, who were blinded to the presence of congenital block vertebrae, were asked to identify the most hypomobile segment(s. The congenital block segments included two subjects with fusion at the C2–3 level and one with fusion at C5-6. Exclusion criteria included subjects who were frankly symptomatic, had moderate or severe degenerative changes in their cervical spines, or displayed signs of cervical instability. Spinal levels were marked on the subject's skin overlying the facet joints from C1 to C7 bilaterally and the motion segments were then marked alphabetically with 'A' corresponding to C1-2. Kappa coefficients (K were calculated to determine the validity of motion palpation to detect the congenitally fused segments as the 'most hypomobile' segments. Sensitivity

Consensually defined facets of personality as prospective predictors of change in depression symptoms.

Science.gov (United States)

Naragon-Gainey, Kristin; Watson, David

2014-08-01

Depression has robust associations with personality, showing a strong relation with neuroticism and more moderate associations with extraversion and conscientiousness. In addition, each Big Five domain can be decomposed into narrower facets. However, we currently lack consensus as to the contents of Big Five facets, with idiosyncrasies across instruments; moreover, few studies have examined associations with depression. In the current study, community participants completed six omnibus personality inventories; self-reported depressive symptoms were assessed at baseline and 5 years later. Exploratory factor analyses suggested three to five facets in each domain, and these facets served as prospective predictors of depression in hierarchical regressions, after accounting for baseline and trait depression. In these analyses, high anger (from neuroticism), low positive emotionality (extraversion), low conventionality (conscientiousness), and low culture (openness to experiences) were significant prospective predictors of depression. Results are discussed in regard to personality structure and assessment, as well as personality-psychopathology associations. © The Author(s) 2014.

Coupled deformation and fluid-flow behavior of a natural fracture in the CSM in situ test block

International Nuclear Information System (INIS)

Gertsch, L.S.

1989-01-01

The primary goal was the evaluation of an in situ block test as a data source for modeling the coupled flow and mechanical behavior of natural rock fractures. The experiments were conducted with the Colorado School of Mines in situ test block, an 8 m 3 (280 ft 3 ) gneiss cube which has been the focus of several previous studies. A single continuous fracture within the block was surrounded with instruments to measure stresses, deformations, and gas conductivity. The setup was subjected to combinations of normal and shear stress by pressurizing the block sides differentially with hydraulic flatjacks. The induced fracture deformation, as measured by two separate sensor systems, did not correlate closely with the fracture conductivity changes or with each other. The test fracture is more complicated physically than two parallel rock faces. Many joints which were not detected by mapping intersect the test fracture and strongly influence its behavior. These invisible joints create sub-blocks which react complexly to changes in applied load. The flow tests reflected the aggregate sub-block dislocations in the flow path. The deformation readings, however, were the movements of discrete points sparsely located among the sub-blocks. High-confidence extrapolation of block test results to large volumes, such as required for nuclear waste repository design, is not feasible currently. Present instrumentation does not sample rock mass behavior in situ at the proper scales. More basically, however, a fundamental gap exists between the nature of jointed rock and our conception of it. Therefore, the near-field rock mass must be discounted as an easily controllable barrier to groundwater flow, until radically different approaches to rock mass testing and modeling are developed

Exploring relations among mindfulness facets and various meditation practices: Do they work in different ways?

Science.gov (United States)

Cebolla, Ausiàs; Campos, Daniel; Galiana, Laura; Oliver, Amparo; Tomás, Jose Manuel; Feliu-Soler, Albert; Soler, Joaquim; García-Campayo, Javier; Demarzo, Marcelo; Baños, Rosa María

2017-03-01

Several meditation practices are associated with mindfulness-based interventions but little is known about their specific effects on the development of different mindfulness facets. This study aimed to assess the relations among different practice variables, types of meditation, and mindfulness facets. The final sample was composed of 185 participants who completed an on-line survey, including information on the frequency and duration of each meditation practice, lifetime practice, and the Five Facet Mindfulness Questionnaire. A Multiple Indicators Multiple Causes structural model was specified, estimated, and tested. Results showed that the Model's overall fit was adequate: χ 2 (1045)=1542.800 (p<0.001), CFI=0.902, RMSEA=0.042. Results revealed that mindfulness facets were uniquely related to the different variables and types of meditation. Our findings showed the importance of specific practices in promoting mindfulness, compared to compassion and informal practices, and they pointed out which one fits each mindfulness facet better. Copyright © 2017 Elsevier Inc. All rights reserved.

Joint attention studies in normal and autistic children using NIRS

Science.gov (United States)

Chaudhary, Ujwal; Hall, Michael; Gutierrez, Anibal; Messinger, Daniel; Rey, Gustavo; Godavarty, Anuradha

2011-03-01

Autism is a socio-communication brain development disorder. It is marked by degeneration in the ability to respond to joint attention skill task, from as early as 12 to 18 months of age. This trait is used to distinguish autistic from nonautistic. In this study Near infrared spectroscopy (NIRS) is being applied for the first time to study the difference in activation and connectivity in the frontal cortex of typically developing (TD) and autistic children between 4-8 years of age in response to joint attention task. The optical measurements are acquired in real time from frontal cortex using Imagent (ISS Inc.) - a frequency domain based NIRS system in response to video clips which engenders a feeling of joint attention experience in the subjects. A block design consisting of 5 blocks of following sequence 30 sec joint attention clip (J), 30 sec non-joint attention clip (NJ) and 30 sec rest condition is used. Preliminary results from TD child shows difference in brain activation (in terms of oxy-hemoglobin, HbO) during joint attention interaction compared to the nonjoint interaction and rest. Similar activation study did not reveal significant differences in HbO across the stimuli in, unlike in an autistic child. Extensive studies are carried out to validate the initial observations from both brain activation as well as connectivity analysis. The result has significant implication for research in neural pathways associated with autism that can be mapped using NIRS.

Transient Femoral Nerve Palsy Following Ilioinguinal Nerve Block ...

African Journals Online (AJOL)

2018-04-20

Apr 20, 2018 ... a 3‑year period under ilioinguinal nerve block only were assessed for evidence of TFNP. All patients ... loss over the anterior aspect of the thigh, weakness of extension at the knee joint, .... and may result in falls with fractures which carry severe ... recovery of the palsy and subsequently discharged same.

Evaluation of Temporal Diagnostic Techniques for Two-Bunch Facet Beam

Energy Technology Data Exchange (ETDEWEB)

Litos, M.D.; Bionta, M.R.; Dolgashev, V.A.; England, R.J.; Fritz, D.; Gilevich, S.; Hering, Ph.; Hogan, M.J.; /SLAC

2011-08-19

Three temporal diagnostic techniques are considered for use in the FACET facility at SLAC, which will incorporate a unique two-bunch beam for plasma wakefield acceleration experiments. The results of these experiments will depend strongly on the the inter-bunch spacing as well as the longitudinal profiles of the two bunches. A reliable, singleshot, high resolution measurement of the beam's temporal profile is necessary to fully quantify the physical mechanisms underlying the beam driven plasma wakefield acceleration. In this study we show that a transverse deflecting cavity is the diagnostic which best meets our criteria. Based on our laboratory testing, numerical calculations, and simulations of the three single-shot temporal diagnostic devices, the X-band TCAV system is the best candidate for resolving FACET's two-bunch beam, with an estimated resolution of 7 {micro}m. Both the S-band TCAV system and the EO system could resolve the peak-to-peak separation of the two bunches in the FACET beam with estimated resolutions of 25 {micro}m and 30 {micro}m, respectively, but would be unable to resolve the temporal profiles of the individual bunches themselves. Because the TCAV signal is more easily interpreted and because the reliability of the EO system is less well known, however, the S-band TCAV system would be the next preferred option after the X-band TCAV system. The Fesca-200 streak camera, though simple, compact, and reliable, is unable to achieve a resolution that would be of use to FACET.

Facets of clinicians' anxiety and the delivery of cognitive behavioral therapy.

Science.gov (United States)

Levita, Liat; Salas Duhne, Paulina Gonzalez; Girling, Carla; Waller, Glenn

2016-02-01

Psychological therapists commonly fail to adhere to treatment protocols in everyday clinical practice. In part, this pattern of drift is attributable to anxious therapists being less likely to undertake some elements of evidence-based therapies - particularly the exposure-based elements. This study considers what facets of anxiety (cognitive, behavioral, physiological) are related to junior clinicians' reported use of cognitive-behavioral therapy techniques. Thirty-two clinicians (mean age = 28.9 years; mean length of CBT experience = 1.5 years; 23 female, nine male) who offered CBT were assessed for their cognitive, behavioral and physiological characteristics (Intolerance of Uncertainty scale; risk taking; skin conductance response and heart rate variability). While the three different facets of anxiety were relatively poorly associated with each other, as is usual in this literature, each facet was linked differently to the reported delivery of CBT techniques (P behavioral or cognitive methods. Of the three facets of anxiety, only physiological reactivity showed an association with the clinicians' temporal characteristics, with more experienced therapists being more likely to have greater skin conductance responses to positive and negative outcomes. These findings suggest that clinicians who are more anxious are less likely to deliver the full evidence-based form of CBT and to focus instead on less challenging elements of the therapy. Potential ways of overcoming this limitation are discussed. Copyright © 2015 Elsevier Ltd. All rights reserved.

Stabilization of the sacroiliac joint.

Science.gov (United States)

Shaffrey, Christopher I; Smith, Justin S

2013-07-01

Lower back pain and pain involving the area of the posterior iliac spine are extremely common. Degeneration of the sacroiliac joint (SIJ) is one potential cause for lower back pain and pain radiating into the groin or buttocks. Degenerative changes to the lumbar spine and sacroiliac joints are common. A recent study evaluating SIJ abnormalities in a primary low back pain population demonstrated 31.7% of patients demonstrated SI joint abnormalities. (4) As is the case for the evaluation and management of isolated lower back pain, the evaluation, management, and role for surgical intervention in SIJ pain is very controversial. Many patients have degenerative changes of the disc, facet joints, and SIJs. A recent systematic review performed to determine the diagnostic accuracy of tests available to clinicians to identify the disc, facet joint, or SIJ as the source of low back pain concluded that tests do exist that change the probability of the disc or SIJ (but not the facet joint) as the source of low back pain. (3) It was also concluded that the usefulness of these tests in clinical practice, particularly for guiding treatment selection, remains unclear. (3) Although there is general agreement that SIJ pathological changes are a potential cause of pain, there is far less agreement about the optimal management of these conditions. A variety of conditions can cause SIJ dysfunction including degenerative and inflammatory arthritis, trauma, prior lumbosacral fusion, hip arthritis, limb length inequality, infections, and neoplasia. (8) There is increasing evidence that image intensifier-guided single periarticular injection can correctly localize pain to the SIJ but the optimal management strategy remains controversial. Recent publications have compared surgical versus injection treatments and fusion versus denervation procedures. (1 , 8) A systematic review found improvement regardless of the treatment, with most studies reporting over 40% improvement in pain as measured

Mindfulness facets, trait emotional intelligence, emotional distress, and multiple health behaviors: A serial two-mediator model.

Science.gov (United States)

Jacobs, Ingo; Wollny, Anna; Sim, Chu-Won; Horsch, Antje

2016-06-01

In the present study, we tested a serial mindfulness facets-trait emotional intelligence (TEI)-emotional distress-multiple health behaviors mediation model in a sample of N = 427 German-speaking occupational therapists. The mindfulness facets-TEI-emotional distress section of the mediation model revealed partial mediation for the mindfulness facets Act with awareness (Act/Aware) and Accept without judgment (Accept); inconsistent mediation was found for the Describe facet. The serial two-mediator model included three mediational pathways that may link each of the four mindfulness facets with multiple health behaviors. Eight out of 12 indirect effects reached significance and fully mediated the links between Act/Aware and Describe to multiple health behaviors; partial mediation was found for Accept. The mindfulness facet Observe was most relevant for multiple health behaviors, but its relation was not amenable to mediation. Implications of the findings will be discussed. © 2016 Scandinavian Psychological Associations and John Wiley & Sons Ltd.

Surgical anesthesia with a combination of T12 paravertebral block and lumbar plexus, sacral plexus block for hip replacement in ankylosing spondylitis: CARE-compliant 4 case reports.

Science.gov (United States)

Ke, Xijian; Li, Ji; Liu, Yong; Wu, Xi; Mei, Wei

2017-06-26

Anesthesia management for patients with severe ankylosing spondylitis scheduled for total hip arthroplasty is challenging due to a potential difficult airway and difficult neuraxial block. We report 4 cases with ankylosing spondylitis successfully managed with a combination of lumbar plexus, sacral plexus and T12 paravertebral block. Four patients were scheduled for total hip arthroplasty. All of them were diagnosed as severe ankylosing spondylitis with rigidity and immobilization of cervical and lumbar spine and hip joints. A combination of T12 paravertebral block, lumbar plexus and sacral plexus block was successfully used for the surgery without any additional intravenous anesthetic or local anesthetics infiltration to the incision, and none of the patients complained of discomfort during the operations. The combination of T12 paravertebral block, lumbar plexus and sacral plexus block, which may block all nerves innervating the articular capsule, surrounding muscles and the skin involved in total hip arthroplasty, might be a promising alternative for total hip arthroplasty in ankylosing spondylitis.

Dynamic response of tunnels in jointed rocks

International Nuclear Information System (INIS)

Heuze, F.E.; Shaffer, R.J.; Walton, O.R.; Maddix, D.M.

1992-03-01

We describe the application of the Discrete Element Method (DEM) to the dynamic analysis of the response of tunnels in jointed rocks to earthquake loading. In situations where large motions of many blocks and collapse occur, the discontinuum-based DEM approach appears superior to other methods of analysis

Two-velocity elasticity theory and facet growth

OpenAIRE

Andreev, A. F.; Melnikovsky, L. A.

2002-01-01

We explain the linear growth of smooth solid helium facets by the presence of lattice point defects. To implement this task, the framework of very general two-velocity elasticity theory equations is developed. Boundary conditions for these equations for various surface types are derived. We also suggest additional experiments to justify the concept.

Reliability aspects and facet damage in high-power emission from (AlGa)As cw laser diodes at room temperature

International Nuclear Information System (INIS)

Kressel, H.; Ladany, I.

1975-01-01

Factors are described that limit the optical power output from (AlGa)As laser diodes (lambda = 8100 to 8300 A) operating cw at room temperature with uncoated facets. Rapid laser ''catastrophic'' degradation due to facet damage (in contrast to ''bulk'' phenomena previously considered) has been found to occur as a result of excessive optical flux density at the facets. The diodes studied are capable of initial cw power emission values of 25 to 100 mW from one facet depending on their dimensions. Data are presented showing long-term constant-current operation at power levels below these maximum values. Preliminary data are also presented on devices utilizing dielectric facet coatings to minimize facet damage. (U.S.)

GPU accelerated Discrete Element Method (DEM) molecular dynamics for conservative, faceted particle simulations

Energy Technology Data Exchange (ETDEWEB)

Spellings, Matthew [Chemical Engineering, University of Michigan, 2800 Plymouth Rd., Ann Arbor, MI 48109 (United States); Biointerfaces Institute, University of Michigan, 2800 Plymouth Rd., Ann Arbor, MI 48109 (United States); Marson, Ryan L. [Materials Science & Engineering, University of Michigan, 2300 Hayward St., Ann Arbor, MI 48109 (United States); Biointerfaces Institute, University of Michigan, 2800 Plymouth Rd., Ann Arbor, MI 48109 (United States); Anderson, Joshua A. [Chemical Engineering, University of Michigan, 2800 Plymouth Rd., Ann Arbor, MI 48109 (United States); Biointerfaces Institute, University of Michigan, 2800 Plymouth Rd., Ann Arbor, MI 48109 (United States); Glotzer, Sharon C., E-mail: sglotzer@umich.edu [Chemical Engineering, University of Michigan, 2800 Plymouth Rd., Ann Arbor, MI 48109 (United States); Materials Science & Engineering, University of Michigan, 2300 Hayward St., Ann Arbor, MI 48109 (United States); Biointerfaces Institute, University of Michigan, 2800 Plymouth Rd., Ann Arbor, MI 48109 (United States)

2017-04-01

Faceted shapes, such as polyhedra, are commonly found in systems of nanoscale, colloidal, and granular particles. Many interesting physical phenomena, like crystal nucleation and growth, vacancy motion, and glassy dynamics are challenging to model in these systems because they require detailed dynamical information at the individual particle level. Within the granular materials community the Discrete Element Method has been used extensively to model systems of anisotropic particles under gravity, with friction. We provide an implementation of this method intended for simulation of hard, faceted nanoparticles, with a conservative Weeks–Chandler–Andersen (WCA) interparticle potential, coupled to a thermodynamic ensemble. This method is a natural extension of classical molecular dynamics and enables rigorous thermodynamic calculations for faceted particles.

Rock mass deformation properties of closely jointed basalt

International Nuclear Information System (INIS)

Kim, K.; Cramer, M.L.

1982-12-01

The deformational behavior of the Columbia River basalt is being investigated as part of a comprehensive site characterization program intended to determine the feasibility of constructing a nuclear waste repository in basalt at Hanford, Washington. Direct field measurements were conducted in a 2-m cube of basalt to obtain truly representative rock mass deformation properties. Load was applied to the test block in three orthogonal directions through the use of flat jacks in two perpendicular planes and a cable anchor system in the third. This configuration allowed the block to be placed in a simulated triaxial stress state at stress levels up to 12.5 MPa. The deformation at the center of the test block was monitored through the use of an optical measurement system developed for this project. The results indicate that the vertically oriented columnar joints have a significant influence on the deformation behavior of the basalt. The modulus in the direction parallel to the column axis was approx. 30 GPa, while the modulus value perpendicular to the columns was approx. 20 GPa. Laboratory measurements of intact specimens taken from this area yielded a value of 80 GPa with no indication of anisotropy. Hysteresis was observed in all loading cycles, but was distinctly more pronounced perpendicular to the column axis, indicative of significant joint displacement in this direction. The results of this test represent the first true rock mass modulus data obtained in closely jointed rock on a large scale. These measurement methods have eliminated many of the ambiguities associated with borehole jacking and surface measurement techniques

RILEM International Symposium on Materials and Joints in Timber Structures

CERN Document Server

Reinhardt, H-W; Garrecht, Harald

2014-01-01

This book contains the contributions from the RILEM International Symposium on Materials and Joints in Timber Structures that was held in Stuttgart, Germany from October 8 to 10, 2013. It covers recent developments in the materials and the joints used in modern timber structures. Regarding basic wooden materials, the contributions highlight the widened spectrum of products comprising cross-laminated timber, glulam and LVL from hardwoods and block glued elements. Timber concrete compounds, cement bonded wood composites and innovative light-weight constructions represent increasingly employed alternatives for floors, bridges and facades. With regard to jointing technologies, considerable advances in both mechanical connections and glued joints are presented. Self-tapping screws have created unprecedented options for reliable, strong as well as ductile joints and reinforcement technologies. Regarding adhesives, which constitute the basis of the jointing/laminating technology of modern timber products, extended o...

Microstructure development of welding joints in high Cr ferritic steels

Energy Technology Data Exchange (ETDEWEB)

Kubushiro, Keiji; Takahashi, Satoshi; Morishima, Keiko [IHI Corporation (Japan). Research Lab.

2010-07-01

Creep failure in high Cr ferritic steels welding joints are Type IV failure. Type IV-failure was ruptured in fine grained region of heat affected zone, microstructure and phase transformation process at welding in fine grained region were very important to clarify. Microstructure difference of heat affected zone was investigated in Gr.91, Gr.92, Gr.122 welding joint. The fraction of 60 degree block boundary, packet boundary, random boundary (including prior gamma boundary) length was compared in three ferritic steels by EBSP(Electron Backscatter Diffraction Pattern) analysis. HAZ was almost fully martensite phase in Gr.122 weld joint. On the other hand, HAZ in Gr.91 welding joint were some equiaxial grain and martensite structure. (orig.)

Expression of CGRP in the temporomandibular joint

International Nuclear Information System (INIS)

Caviedes Bucheli, Javier; Medina Buitrago, Diana Marcela

2002-01-01

The presence and content of calcitonin gene-related peptide (CGRP) is evaluated in the hyperplastic retrodiscal tissue of the temporomandibular joint in patients with joint degenerative disease by radioimmunoassay. Study population has included 8 female patients in pre-menopausic status, without to be pregnant, without to be lactating for a year and with diagnostic of joint degenerative disease (osteoarthrosis). Pain levels are registered with visual analog scale, where 0 is absence of pain and 16 acute pain. A bone degeneration is classified as mild, moderate and severe, according to findings of nuclear magnetic resonance. The 15 retrodiscal hyperplastic tissue samples are taken from patients undergoing to open surgery of temporomandibular joint. The specimens were placed in plastic blocks with freezing medium and are stored at -70 degrees celsius until neuropeptide extraction by radioimmunoassay with kit for CGRP. A directly proportional relationship is established between the degree of bone degeneration and neuropeptide expression and between the osteoarthrosis classification with analogue visual scale. Findings have shown definitive correlation between pain levels and expression of neuropeptide. CGRP is expressed in the retrodiscal tissue of temporomandibular joint in human with joint degenerative disease and is directly related with levels osteoarthrosis and pain [es

[Multi-facetted clinical presentation of thrombotic thrombocytopenic purpura

DEFF Research Database (Denmark)

Niemann, C.U.; Jurlander, J.; Daugaard, G.

2009-01-01

smears. Determination of the ADAMTS13-activity is now becoming available as a routine analysis. We present two cases that illustrate the multi-facetted clinical presentation under which TTP occurs. The importance of access to ADAMTS13 measurements is stressed Udgivelsesdato: 2009/1/26...

Lumbar radiculopathy due to unilateral facet hypertrophy following lumbar disc hernia operation: a case report.

Science.gov (United States)

Kökeş, Fatih; Günaydin, Ahmet; Aciduman, Ahmet; Kalan, Mehmet; Koçak, Halit

2007-10-01

To present a radiculopathy case due to unilateral facet hypertrophy developing three years after a lumbar disc hernia operation. A fifty two-year-old female patient, who had been operated on for a left L5-S1 herniated lumbar disc three years ago, was hospitalized and re-operated with a diagnosis of unilateral facet hypertrophy. She had complaints of left leg pain and walking restrictions for the last six months. Left Straight Leg Raising test was positive at 40 degrees , left ankle dorsiflexion muscle strength was 4/5, left Extensor Hallucis Longus muscle strength was 3/5, and left Achilles reflex was hypoactive. Lumbar spinal Magnetic Resonance Imaging revealed left L5-S1 facet hypertrophy. Lumbar radiculopathy due to lumbar facet hypertrophy is a well-known neurological condition. Radicular pain develops during the late postoperative period following lumbar disc hernia operations that are often related to recurrent disc herniation or to formation of post-operative scar tissue. In addition, it can be speculated that unilateral facet hypertrophy, which may develop after a disc hernia operation, might also be one of the causes of radiculopathy.

MORPHOMETRY OF THE ARTICULAR FACETS ON THE SUPERIOR, MEDIAL AND LATERAL SURFACES OF THE BODY OF TALUS AND ITS CLINICAL RELEVANCE

Directory of Open Access Journals (Sweden)

Goda Jatin B, Patel Shailesh M, Parmar Ajay M, Agarwal GC

2015-07-01

Full Text Available Background: In the formation of Ankle joint, tibio-fibular mortice receives superior, medial and lateral articular surfaces of body of Talus. Because of very limited availability of the data on the Morphometry of the articular facets on the Body of the dry human tali, this study was undertaken. Aims: To prepare the database on the articular facets on the superior, medial and lateral surfaces of body of talus, to find if there is statistically significant difference between both the sides of measurements and to compare the results with the previous studies. Methods and Material: 40 Dry Human Tali (20 Right and 20 Left were measured with Digital vernier caliper for the following Measurements: On the Trochlear surface: Medial length, Central length, Lateral length, Anterior width, Central width, Posterior width. On the lateral triangular articular facet: Central height, Central width. On the coma shaped medial articular facet: Central height, Central width. Results: Mean values of Medial, Central and Lateral lengths were 31.02, 30.39 and 29.63mm on Right side and 31.79, 30.65 and 29.45mm on Left side. Mean Anterior, Central and Posterior widths were 28.87, 28.16 and 21.59mm on right side and 29.08, 27.54 and 21.78mm on left side. On the medial articular surface, mean central height was 11.93mm on the right side and 11.29mm on the left side, Mean central width was 27.94mm on the right side and 28.29mm on the left side. On the lateral articular surface, mean central height was 22.14mm on the right side and 22.63mm on the left side. Mean central width was 18.93mm on the right side and 18.99mm on the left side. There is no significant difference between right and left sides of measurements. Conclusion: The trochlear articular surface is wider in front, measurements of opposite talus bone can be used as a control during talus bone replacement surgery, it may help surgeons to plan pre-operatively the complex talar fracture surgeries, to design accurate

Subfracture insult to the human cadaver patellofemoral joint produces occult injury.

Science.gov (United States)

Atkinson, P J; Haut, R C

1995-11-01

The current criterion used by the automotive industry for injury to the lower extremity is based on visible bone fracture. Studies suggest, however, that chronic joint degeneration may occur after subfracture impact loads on the knee. We hypothesized that subfracture loading of the patellofemoral joint could result in previously undocumented microtrauma in areas of high contact pressure. In the current study, seven patellofemoral joints from human cadavers were subjected to impact with successively greater energy until visible fracture was noted. Transverse and comminuted fractures of the patella were noted at 6.7 kN of load. Approximately 45% of the impact energy then was delivered to the contralateral joint. Subfracture loads of 5.2 kN resulted in no gross bone fracture in five of seven specimens. Histological examination of the patellae horizontal split fracture in the subchondral bone, at the tidemark, or at the interface of calcified cartilage and subchondral bone. The trauma appeared predominantly on the lateral facet, adjacent to or directly beneath preexisting fibrillation of the articular surface. Surface fibrillation was noted in histological sections of control patellae (not subjected to impact loading), but occult damages were not observed. Although the mechanism of this occult trauma is unknown, similar damage has been shown to occur from direct shear loading. As these microcracks can potentiate a disease process in the joint, this study may suggest that the current criterion for injury, based on bone fracture alone, is not sufficiently conservative.

Application of Composite Indices for Improving Joint Detection Capabilities of Instrumented Roof Bolt Drills in Underground Mining and Construction

Science.gov (United States)

Liu, Wenpeng; Rostami, Jamal; Elsworth, Derek; Ray, Asok

2018-03-01

Roof bolts are the dominant method of ground support in mining and tunneling applications, and the concept of using drilling parameters from the bolter for ground characterization has been studied for a few decades. This refers to the use of drilling data to identify geological features in the ground including joints and voids, as well as rock classification. Rock mass properties, including distribution of joints/voids and strengths of rock layers, are critical factors for proper design of ground support to avoid instability. The goal of this research was to improve the capability and sensitivity of joint detection programs based on the updated pattern recognition algorithms in sensing joints with smaller than 3.175 mm (0.125 in.) aperture while reducing the number of false alarms, and discriminating rock layers with different strengths. A set of concrete blocks with different strengths were used to simulate various rock layers, where the gap between the blocks would represent the joints in laboratory tests. Data obtained from drilling through these blocks were analyzed to improve the reliability and precision of joint detection systems. While drilling parameters can be used to detect the gaps, due to low accuracy of the results, new composite indices have been introduced and used in the analysis to improve the detection rates. This paper briefly discusses ongoing research on joint detection by using drilling parameters collected from a roof bolter in a controlled environment. The performances of the new algorithms for joint detection are also examined by comparing their ability to identify existing joints and reducing false alarms.

The correlation of radiographic findings and patient symptomatology in cervical degenerative joint disease: a cross-sectional study.

Science.gov (United States)

Rudy, Iris Sun; Poulos, Alexandra; Owen, Laura; Batters, Ashlee; Kieliszek, Kasia; Willox, Jessica; Jenkins, Hazel

2015-01-01

There are few known studies investigating the correlation of symptomatology with the specific subtypes of cervical spine degenerative joint disease demonstrated on radiograph. The aim of this study was to assess the correlation and diagnostic test accuracy of specific symptoms in determining the presence, type and severity of degenerative joint disease on radiograph. A retrospective cross-sectional design was used to correlate cervical radiographic findings with neck pain and related symptomatology. Radiographs of 322 patients from April 2010 to June 2012 were assessed and evidence of radiographic cervical degenerative joint disease was extracted. Clinical data for each patient was obtained from their patient files including: pain using a VAS, presence of neck stiffness, presence of headaches, presence of shoulder referral, presence of hand radiculopathy and presence of hand numbness. Measures of diagnostic test accuracy and regression analysis were used to assess for any correlation between symptoms and radiographic findings. Referral of pain to the shoulder and neck stiffness showed small degrees of correlation with cervical degenerative joint disease, however, these correlations were not maintained when age was accounted for. Only age showed consistent statistical significance as a predictor for degree of disc degeneration (correlation coefficient (95% confidence interval): 0.06 (0.055, 0.066)); the presence of facet hypertrophy (odds ratio (95% confidence interval): 1.12 (1.09, 1.15)); or uncinate process hypertrophy (odds ratio (95% confidence interval): 1.15 (1.12, 1.18)). Neck stiffness demonstrated a small degree of diagnostic test accuracy for the degree of cervical disc degeneration (area under the curve (95%CI): 0.62 (0.56, 0.68)) and the presence of either facet (diagnostic OR (95%CI):1.69 (1.04, 2.76)) and uncinated process hypertrophy (LR+ (95%CI): 1.17 (1.00, 1.38)). The results of this study indicate that clinical symptoms such as pain level

The anterior borders of the clavicle and the acromion are not always aligned in the intact acromioclavicular joint: a cadaveric study.

Science.gov (United States)

Barth, Johannes; Boutsiadis, Achilleas; Narbona, Pablo; Lädermann, Alexandre; Arrigoni, Paolo; Adams, Christopher R; Burkhart, Stephen S; Denard, Patrick J

2017-07-01

The aim of this study was to find reliable anatomic landmarks of the normal acromioclavicular joint (ACJ) that could enable the precise evaluation of the horizontal displacement of the clavicle after dislocation. The hypothesis was that the anterior borders of the acromion and the clavicle are always aligned in intact ACJs. In 30 cadaveric specimens, the anterior and posterior borders of the ACJ's articular facets and the most prominent anterior and posterior bony landmarks of the acromion and the clavicle were identified. The anterior and posterior overhang of the acromion and the clavicle was measured in relation to the borders of the articular facets. Therefore, the possible anterior and posterior alignment of the ACJ was evaluated. Anteriorly, only 18 ACJs (60%) were aligned whereas 7 (24%) had major overhang of the acromion and 3 (10%) had major overhang of the clavicle. Similarly, 18 cases (60%) were posteriorly aligned, whereas 6 (20%) had major clavicular overhang and 4 (14%) had major overhang of the acromion. In 78% of these cases, the ACJ was aligned as well anteriorly as posteriorly (P < .001). Finally, the larger the width of the acromion (P = .032) or the clavicle (P = .049), the better the posterior joint alignment. Our hypothesis was not verified. The acromion and clavicle are not perfectly aligned in a significant number of specimens with intact ACJs (40% of cases). The most reliable landmarks remain their articular facets. Copyright © 2017 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Peripheral nerve blocks in patients with Ehlers-Danlos syndrome, hypermobility type: a report of 2 cases.

Science.gov (United States)

Patzkowski, Michael S

2016-03-01

Ehlers-Danlos syndrome is an inherited disorder of collagen production that results in multiorgan dysfunction. Patients with hypermobility type display skin hyperextensibility and joint laxity, which can result in chronic joint instability, dislocation, peripheral neuropathy, and severe musculoskeletal pain. A bleeding diathesis can be found in all subtypes of varying severity despite a normal coagulation profile. There have also been reports of resistance to local anesthetics in these patients. Several sources advise against the use of regional anesthesia in these patients citing the 2 previous features. There have been reports of successful neuraxial anesthesia, but few concerning peripheral nerve blocks, none of which describe nerves of the lower extremity. This report describes 2 cases of successful peripheral regional anesthesia in the lower extremity. In case 1, a 16-year-old adolescent girl with hypermobility type presented for osteochondral grafting of tibiotalar joint lesions. She underwent a popliteal sciatic (with continuous catheter) and femoral nerve block under ultrasound guidance. She proceeded to surgery and tolerated the procedure under regional block and intravenous sedation. She did not require any analgesics for the following 15 hours. In case 2, an 18-year-old woman with hypermobility type presented for medial patellofemoral ligament reconstruction for chronic patella instability. She underwent a saphenous nerve block above the knee with analgesia in the distribution of the saphenous nerve lasting for approximately 18 hours. There were no complications in either case. Prohibitions against peripheral nerve blocks in patients with Ehlers-Danlos syndrome, hypermobility type, appear unwarranted. Published by Elsevier Inc.

Parallel Syndromes: Two Dimensions of Narcissism and the Facets of Psychopathic Personality in Criminally-Involved Individuals

Science.gov (United States)

2012-01-01

Little research has examined different dimensions of narcissism that may parallel psychopathy facets in criminally-involved individuals. The present study examined the pattern of relationships between grandiose and vulnerable narcissism, assessed using the Narcissistic Personality Inventory-16 and the Hypersensitive Narcissism Scale, respectively, and the four facets of psychopathy (interpersonal, affective, lifestyle, and antisocial) assessed via the Psychopathy Checklist: Screening Version (PCL:SV). As predicted, grandiose and vulnerable narcissism showed differential relationships to psychopathy facets, with grandiose narcissism relating positively to the interpersonal facet of psychopathy and vulnerable narcissism relating positively to the lifestyle facet of psychopathy. Paralleling existing psychopathy research, vulnerable narcissism showed stronger associations than grandiose narcissism to 1) other forms of psychopathology, including internalizing and substance use disorders, and 2) self- and other-directed aggression, measured using the Life History of Aggression and the Forms of Aggression Questionnaire. Grandiose narcissism was nonetheless associated with social dysfunction marked by a manipulative and deceitful interpersonal style and unprovoked aggression. Potentially important implications for uncovering etiological pathways and developing treatment interventions for these disorders in externalizing adults are discussed. PMID:22448731

{331}-Faceted trisoctahedral gold nanocrystals: synthesis, superior electrocatalytic performance and highly efficient SERS activity

Science.gov (United States)

Song, Yahui; Miao, Tingting; Zhang, Peina; Bi, Cuixia; Xia, Haibing; Wang, Dayang; Tao, Xutang

2015-04-01

We investigate the effect of gold (Au) seeds prepared in cetyltrimethylammonium chloride solution (CTAC-Au seeds) on the index facets of trisoctahedral gold nanocrystals (TOH Au NCs). We demonstrate that monodisperse {331}-faceted TOH Au NCs with controllable sizes (from 60 to 255 nm) can be successfully prepared in high yield by using 3.0 nm CTAC-Au seeds or as-prepared 70 nm TOH Au NCs as seeds. We find that the electrocatalytic performance on methanol oxidation and surface enhancement Raman spectroscopy (SERS) activity of {331}-faceted TOH Au NCs is size-dependent. In comparison with well-known nanoporous gold (0.088 mA cm-2), {331}-faceted TOH Au NCs with sizes of 110 nm exhibit fairly high catalytic activity (0.178 mA cm-2) on methanol oxidation (1.0 M) in alkaline media due to the presence of increasing density of atomic steps, ledges, and kinks on the NC surfaces. Their current density is reduced by less than 7% after 500 cycling tests. {331}-Faceted TOH Au NCs with sizes of 175 nm exhibit the highest SERS activity for 4-aminothiophenol (4-ATP) molecules. The enhancement factors of a1 modes of 4-ATP molecules can reach the order of 109 when the 4-ATP concentration is 3 × 10-6 M. Moreover, Raman signals (ag modes) of 4,4'-dimercaptoazobenzene (DMAB) molecules on TOH Au NCs are stronger than those on spherical Au NCs of comparable size due to the enhanced laser-induced transformation of 4-ATP molecules by high-index {331}-facets during SERS measurement. Furthermore, the SERS intensities of 4-methylbenzenethiol (4-MTP) molecules on TOH Au NCs are also higher than those on spherical Au NCs of comparable size due to sharp extremities.We investigate the effect of gold (Au) seeds prepared in cetyltrimethylammonium chloride solution (CTAC-Au seeds) on the index facets of trisoctahedral gold nanocrystals (TOH Au NCs). We demonstrate that monodisperse {331}-faceted TOH Au NCs with controllable sizes (from 60 to 255 nm) can be successfully prepared in high yield by

Facet formation and ohmic contacts for laser diodes on non- and semipolar GaN

Energy Technology Data Exchange (ETDEWEB)

Rass, Jens; Ploch, Simon; Vogt, Patrick [Technische Universitaet Berlin (Germany). Institute of Solid State Physics; Wernicke, Tim; Redaelli, Luca; Einfeldt, Sven [Ferdinand- Braun-Institut fuer Hoechstfrequenztechnik, Berlin (Germany); Kneissl, Michael [Technische Universitaet Berlin (Germany). Institute of Solid State Physics; Ferdinand- Braun-Institut fuer Hoechstfrequenztechnik, Berlin (Germany)

2009-07-01

Group-III-Nitride heterostructures grown on nonpolar and semipolar planes allow the realization of highly efficient devices such as laser diodes and LEDs due to the reduction or elimination of the quantum confined Stark effect. However, the realization of these devices poses a number of challenges, in particular the formation of smooth laser facets and the fabrication of ohmic contacts. In this talk optimized schemes for facet formation and contact resistance reduction for nitride based devices on non- and semipolar planes are presented, and various concepts are discussed. We discuss a laser scribing process that allows the cleaving of facets along the c- and a-plane for devices grown on nonpolar substrates. For semipolar planes there is no low-index cleavage plane in order to form resonators along the projection of the c-axis. Therefore we have investigated etching techniques in order to produce flat facets perpendicular to the plane of growth. For the challenging formation of p-type contacts to GaN we discuss different methods such as chemical treatments, different metallization schemes and capping layers to reduce the contact resistivity.

A Framework for a Multi-Faceted, Educational, Knowledge-Based Recommender System

Directory of Open Access Journals (Sweden)

John W. Coffey

2016-08-01

Full Text Available The literature on intelligent or adaptive tutoring systems generally has a focus on how to determine what resources to present to students as they make their way through a course of study. The idea of multi-faceted student modeling is that a variety of measures, both academic and non-academic, might be represented in student models in service of a broader educational context. This paper contains a framework for a multi-faceted, educational, knowledge-based recommender system, including a basic set of descriptors that the model contains, and a taxonomy of inferences that might be made over such models.

Selective Facet Reactivity During Cation Exchange in Cadmium Sulfide Nanorods

Energy Technology Data Exchange (ETDEWEB)

Sadtler, Bryce; Demchenko, Denis; Zheng, Haimei; Hughes, Steven; Merkle, Maxwell; Dahmen, Ulrich; Wang, Lin-Wang; Alivisatos, A. Paul

2008-12-18

The partial transformation of ionic nanocrystals through cation exchange has been used to synthesize nanocrystal heterostructures. We demonstrate that the selectivity for cation exchange to take place at different facets of the nanocrystal plays an important role in determining the resulting morphology of the binary heterostructure. In the case of copper I (Cu+) cation exchange in cadmium sulfide (CdS) nanorods, the reaction starts preferentially at the ends of the nanorods such that copper sulfide (Cu2S) grows inwards from either end. The resulting morphology is very different from the striped pattern obtained in our previous studies of silver I (Ag+) exchange in CdS nanorods where non-selective nucleation of silver sulfide (Ag2S) occurs. From interface formation energies calculated for several models of epitaxialconnections between CdS and Cu2S or Ag2S, we infer the relative stability of each interface during the nucleation and growth of Cu2S or Ag2S within the CdS nanorods. The epitaxial connections of Cu2S to the end facets of CdS nanorods minimize the formation energy, making these interfaces stable throughout the exchange reaction. However, as the two end facets of wurtzite CdS nanorods are crystallographically nonequivalent, asymmetric heterostructures can be produced.

Facet Appearance on the Lateral Face of Sapphire Single-Crystal Fibers during LHPG Growth

Directory of Open Access Journals (Sweden)

Liudmila D. Iskhakova

2016-08-01

Full Text Available Results of the study of the lateral surface of single-crystal (SC sapphire fibers grown along crystallographic directions [ 0001 ] and [ 11 2 ¯ 0 ] by the LHPG method are presented. The appearance or absence of faceting of the lateral surface of the fibers depending on the growth direction is analyzed. The crystallographic orientation of the facets is investigated. The microstructure of the samples is investigated with the help of an optical microscope and a JSM-5910LV scanning electronic microscope (JEOL. The crystallographic orientations of the facets on the SC sapphire fiber surface are determined by electron backscatter diffraction (EBSD. The seed orientation is studied by means of XRD techniques.

The radiographic distinction of degenerative slippage (spondylolisthesis and retrolisthesis) from traumatic slippage of the cervical spine

International Nuclear Information System (INIS)

Lee, C.; Woodring, J.H.; Rogers, L.F.; Kim, K.S.

1986-01-01

In a review of 42 cases of degenerative arthritis of the cervical spine and 22 cases of cervical spine trauma with an observed anterior slip-page (spondylolisthesis) or posterior slippage (retrolisthesis) of the vertebral bodies of 2 mm or more, characteristic features were observed which allowed distinction between degenerative and traumatic slippage of the cervical spine. In degenerative slippage the shape of the articular facets and width of the facet joint space may remain normal; however, in most cases the articular facets become 'ground-down' with narrowing of the facet joint space and the articular facets themselves becoming thinned or ribbon-like. In traumatic slippage the articular facets will either be normally shaped or fractured and the facet joint space will be abnormally widened. Plain radiographs will usually allow this distinction to be made; however, in difficult cases polytomography may be required. (orig.)

Within-Trait Heterogeneity in Age Group Differences in Personality Domains and Facets: Implications for the Development and Coherence of Personality Traits

Science.gov (United States)

Mõttus, René; Realo, Anu; Allik, Jüri; Esko, Tõnu; Metspalu, Andres; Johnson, Wendy

2015-01-01

The study investigated differences in the Five-Factor Model (FFM) domains and facets across adulthood. The main questions were whether personality scales reflected coherent units of trait development and thereby coherent personality traits more generally. These questions were addressed by testing if the components of the trait scales (items for facet scales and facets for domain scales) showed consistent age group differences. For this, measurement invariance (MI) framework was used. In a sample of 2,711 Estonians who had completed the NEO Personality Inventory 3 (NEO PI-3), more than half of the facet scales and one domain scale did not meet the criterion for weak MI (factor loading equality) across 12 age groups spanning ages from 18 to 91 years. Furthermore, none of the facet and domain scales met the criterion for strong MI (intercept equality), suggesting that items of the same facets and facets of the same domains varied in age group differences. When items were residualized for their respective facets, 46% of them had significant (p traits should show similar age group differences. Given this, the FFM domains and facets as embodied in the NEO PI-3 do not reflect aetiologically coherent traits. PMID:25751273

FACET, Radiation View Factor with Shadowing

International Nuclear Information System (INIS)

Shapiro, A.B.

1988-01-01

1 - Description of program or function: FACET calculates the radiation geometric view factor (alternatively called shape factor, angle factor, or configuration factor) between surfaces for axisymmetric, two-dimensional planar and three-dimensional geometries with interposed third surface obstructions. FACET was developed to calculate view factors as input data to finite element heat transfer analysis codes. 2 - Method of solution: Three algorithms are incorporated to integrate the view factor equation for three dimensional geometries. The algorithm used for any two surfaces depends on their geometric relationship and whether third surface obstructions exist. The three algorithms are the area integration (AI) method, the line integration method (LI), and the Mitalas and Stephenson (MS) method. The LI method is used to calculate the view factor between two disjoint surfaces. If the two surfaces have an adjoint edge, the MS method is used. The AI method is used if there is self or third surface shadowing. In two-dimensional planar geometries, the view factor between two surfaces is calculated using Hottel's cross string method. For axisymmetric geometries in the absence of shadowing, the view factor between two surfaces is calculated by view factor algebra using the view factors between parallel coaxial discs. In the presence of self or third surface shadowing, the geometry is represented in three dimensions before calculating the view factors

Differentiating Between Donald Trump and Hillary Clinton Voters Using Facets of Right-Wing Authoritarianism and Social-Dominance Orientation.

Science.gov (United States)

Crowson, Howard Michael; Brandes, Joyce A

2017-06-01

Historically, much of the research on right-wing authoritarianism and social dominance orientation has proceeded from the assumption that they are unidimensional. Recently, researchers have begun to seriously consider the possibility that they are multidimensional in nature and should be measured as such. Several studies have examined the unique relationships between right-wing authoritarianism and social dominance orientation facets and social and political outcome measures of interest. However, there have been no efforts to include the full slate of right-wing authoritarianism and social dominance orientation facets as predictors in the same model. This is problematic when investigating the discriminant validity of these facets, given the potential empirical overlap among the facets both within and across scales. We included facets of right-wing authoritarianism and social dominance orientation as predictors of U.S. voters' intentions to vote for Hillary Clinton versus Donald Trump in the 2016 Presidential Election. Data were collected in September 2016. We found evidence for the discriminant validity of several of the right-wing authoritarianism and social dominance orientation facets.

Shear-flow coupling in non-planar rock joints

International Nuclear Information System (INIS)

Makurat, A.; Barton, N.

1985-01-01

Crystalline rock masses are regarded as a possible host rock for permanent nuclear waste disposal. During the excavation of the required shafts and tunnels, the initial state of stress will be changed and cause a deformation of the rock mass and discontinuities. During the lifetime of the nuclear repository joint apertures may change due to thermally induced stress variations during the heating and cooling phase. As the conductivity of a joint is very sensitive to its aperture, fluid flow from and towards a repository, as well as the potential transport times of radionuclides are highly dependent on the deformability of the joints. Theoretical calculations of coupled flow in rock joints (Barton et al. 1984) predict an increase of conductivity of several orders of magnitude for the first few millimeters for shear displacement. The shear-dilation-conductivity coupling for two block sizes at two effective stress levels is shown

Stability analysis of jointed rock slope by the block theory

International Nuclear Information System (INIS)

Yoshinaka, Ryunoshin; Yamabe, Tadashi; Fujita, Tomoo.

1990-01-01

The block theory to analyze three dimensional stability problems of discontinuous rock masses is applied to the actual discontinuous rock slope. Taking into consideration that the geometrical information about discontinuities generally increases according to progressive steps of rock investigation in field, the method adopted for analysis is divided into following two steps; 1) the statistical/probabilitical analysis using information from the primary investigation stage which mainly consists of that of natural rock outcrops, and 2) the deterministic analysis correspond to the secondary stage using exploration adits. (author)

A glimpse behind the mask: facets of narcissism and feelings of self-worth.

Science.gov (United States)

Zeigler-Hill, Virgil; Besser, Avi

2013-01-01

This study examined the connections that the facets of narcissism captured by the Narcissistic Personality Inventory (NPI; Raskin & Hall, 1979) and the Pathological Narcissism Inventory (PNI; Pincus et al., 2009) have with self-esteem. This was accomplished by asking 372 participants to complete measures of narcissism and self-esteem level as well as daily diary measures concerning their state self-esteem and daily experiences. Our analyses found that the facets of narcissism differed in their associations with average level of self-esteem, fluctuations in state self-esteem over time, and self-esteem reactions following daily events. These results suggest that it is important to consider specific facets of narcissism when examining feelings of self-worth rather than relying on broader composite measures of narcissistic personality features. Implications of these results for our understanding of the dynamics of the narcissistic personality are discussed.

Facets of operational performance in an emergency room (ER)

NARCIS (Netherlands)

van der Vaart, Taco; Vastag, Gyula; Wijngaard, Jacob

This paper, using detailed time measurements of patients complemented by interviews with hospital management and staff, examines three facets of an emergency room's (ER) operational performance: (1) effectiveness of the triage system in rationing patient treatment; (2) factors influencing ER's

Synthesis of ZnWO{sub 4} Electrode with tailored facets: Deactivating the Microorganisms through Photoelectrocatalytic methods

Energy Technology Data Exchange (ETDEWEB)

Zhan, Su [Department of Materials Science and Engineering, Dalian Maritime University, Dalian 116026 (China); Zhou, Feng, E-mail: zhoufeng99@mails.tsinghua.edu.cn [Department of Materials Science and Engineering, Dalian Maritime University, Dalian 116026 (China); Huang, Naibao; Liu, Yujun; He, Qiuchen; Tian, Yu; Yang, Yifan [Department of Materials Science and Engineering, Dalian Maritime University, Dalian 116026 (China); Ye, Fei [Department of Materials Science and Engineering, Dalian University of Technology, Dalian 116026 (China)

2017-01-01

Highlights: • ZnWO{sub 4} with different exposed facets was synthesized by the hydrothermal method. • The reactive facets were tailored by varying the solution pH. • The photoelectrocatalysis was more efficient in deactivating the microorganism. - Abstract: The exotic invasive species from the ballast water in the ship will bring about serious damages to ecosystem. Photocatalyst films have been widely studied for sterilization. In this study, ZnWO{sub 4} with different exposed facets was synthesized by hydrothermal method, and ZnWO{sub 4} film electrodes have been applied in ballast water treatment through the electro-assisted photocatalytic system. Then the samples were investigated by X-ray diffraction (XRD), X-ray photo-electron spectroscopy (XPS), Field emission on scanning electron microcopy (FE-SEM), Transmission electron microscopy (TEM), UV–vis diffuse reflectance spectroscopy (DRS), BET specific surface area analysis, Fourier transform infrared (FT-IR) and Electrochemical impedance spectra (EIS). ZnWO{sub 4} with an appropriate exposure of (0 1 1) facets ratio exhibited the best photocatalytic and photoelectrocatalytic activities. The microorganisms deactivated completely in 10 min by ZnWO{sub 4} films with 3 V bias. The mechanisms of (0 1 1) facets enhanced the photocatalytic and photoelectrocatalytic activities which were deduced based on the calculated result from the first principles. Simultaneously, appropriate exposed facets and applied bias could reduce the recombination of the photogenerated electron-hole pairs, and improve the photocatalytic activities of ZnWO{sub 4}.

Hierarchical (0 0 1) facet anatase/rutile TiO2 heterojunction photoanode with enhanced photoelectrocatalytic performance

International Nuclear Information System (INIS)

Tian, Hongyi; Zhao, Guohua; Zhang, Ya-nan; Wang, Yanbin; Cao, Tongcheng

2013-01-01

Highlights: ► (0 0 1) facet TiO 2 photoanode with large surface area is reported for the first time. ► Ordered heterojunction further improves light absorption in (0 0 1) facet TiO 2 system. ► (0 0 1) facet TiO 2 photoanode possesses promoted photoelectrocatalytic performance. ► Photoelectrical enhancement mechanism is clarified by electrochemical methods. ► Photogenerated carrier and lifetime are remarkably enhanced by ingenious design. -- Abstract: A hierarchical heterojunction TiO 2 photoanode with large surface/body ratio is reported to exhibit high oxidation activity due to the constructing of anatase TiO 2 with exposed (0 0 1) facets. The mixed-phase photoanode is fabricated through surfactant-assisted anchoring ultrathin anatase nanosheets on vertically ordered rutile nanorod arrays. This cactaceae-like TiO 2 possesses high-exposed (0 0 1) facets outer layer, large specific surface area (375 m 2 g −1 ), efficient photo-to-current conversion (8.2%) and excellent photocatalytic ability to degrade bisphenol A. The greatly promoted photoelectric and photocatalytic performance results from the synergetic effects of the architecture design of high-active (0 0 1) facets and hierarchical heterojunctions. The mechanism analysis reveals that the remarkable increase of photogenerated carrier concentration (2.40 × 10 22 cm −3 ) improves photocatalytic activity, by virtue of constructing staggered energy levels, suppressing the recombination of electrons and holes, and extending the electron lifetime (133 ms)

The Role of Surface Passivation in Controlling Ge Nanowire Faceting.

Science.gov (United States)

Gamalski, A D; Tersoff, J; Kodambaka, S; Zakharov, D N; Ross, F M; Stach, E A

2015-12-09

In situ transmission electron microscopy observations of nanowire morphologies indicate that during Au-catalyzed Ge nanowire growth, Ge facets can rapidly form along the nanowire sidewalls when the source gas (here, digermane) flux is decreased or the temperature is increased. This sidewall faceting is accompanied by continuous catalyst loss as Au diffuses from the droplet to the wire surface. We suggest that high digermane flux and low temperatures promote effective surface passivation of Ge nanowires with H or other digermane fragments inhibiting diffusion and attachment of Au and Ge on the sidewalls. These results illustrate the essential roles of the precursor gas and substrate temperature in maintaining nanowire sidewall passivation, necessary to ensure the growth of straight, untapered, ⟨111⟩-oriented nanowires.

Investigation on CO catalytic oxidation reaction kinetics of faceted perovskite nanostructures loaded with Pt

KAUST Repository

Yin, S. M.

2017-01-18

Perovskite lead titanate nanostructures with specific {111}, {100} and {001} facets exposed, have been employed as supports to investigate the crystal facet effect on the growth and CO catalytic activity of Pt nanoparticles. The size, distribution and surface chemical states of Pt on the perovskite supports have been significantly modified, leading to a tailored conversion temperature and catalytic kinetics towards CO catalytic oxidation.

Investigation on CO catalytic oxidation reaction kinetics of faceted perovskite nanostructures loaded with Pt

KAUST Repository

Yin, S. M.; Duanmu, J. J.; Zhu, Yihan; Yuan, Y. F.; Guo, S. Y.; Yang, J. L.; Ren, Z. H.; Han, G. R.

2017-01-01

Perovskite lead titanate nanostructures with specific {111}, {100} and {001} facets exposed, have been employed as supports to investigate the crystal facet effect on the growth and CO catalytic activity of Pt nanoparticles. The size, distribution and surface chemical states of Pt on the perovskite supports have been significantly modified, leading to a tailored conversion temperature and catalytic kinetics towards CO catalytic oxidation.

Intentions to Cheat: Ajzen's Planned Behavior and Goal-Related Personality Facets.

Science.gov (United States)

Lonsdale, Damian

2017-02-17

This study sought to test antecedents to college students' intentions to cheat by utilizing Ajzen's ( 1991 ) theory of planned behavior (TPB), and four goal-related personality facets. Those facets were behavioral approach, behavioral inhibition, need for achievement-hope of success, and need for achievement-fear of failure. As hypothesized, perceived friends' and parents' attitudes toward academic dishonesty (two subjective norms) and perceived ease of cheating (perceived behavioral control) all positively predicted overall intentions to cheat. Perceived friends' attitudes seemed to play a more influential role than perceived parents' attitudes. Interestingly, male students reported greater parental acceptance of academic misconduct than female students reported. Among the personality facets, behavioral approach and need for achievement-hope of success were positive and negative predictors of cheating intentions, respectively. A more fine-grained examination of take-home assignments revealed that students considered them easier to cheat on and reported greater intentions to cheat on them in comparison to other forms of academic work (e.g., exams and papers). Also, need for achievement-fear of failure positively predicted intentions to cheat on take-home assignments, but not other cheating intentions. Implications and suggestions for future research are discussed.

PENGGUNAAN BLOCK SET CONNECTION (BSC PADA SAMBUNGAN ELEMEN BETON PRECAST

Directory of Open Access Journals (Sweden)

Jojon Suherman

2012-08-01

Full Text Available Application of block set connection (bsc in precast concrete element joints. Precast concrete technology is an alternative of reinforced concrete construction with the advantages of high quality and economical cost. However, precast concrete has not been widely used for seismic regions because of its weakness in the joints between precast concrete elements that are not ductile. The purpose of this research was to determine the ductility of precast concrete connections, which use a block set connection type (BSC. The design of beam column connection using the theory of full ductile that uses 2 specimen tests in a 1:1 scale, tested with cyclic loading and ana­lyzed for ductility, strength, stiffness, energy dissipation, and pattern collapse. The expe­rimental results obtained mean value of the ductility of μ = 6, the achievement of ductility value is greater than the ductility of the requirements in SNI 1726-2002 that is μ = 5.3. Therefore, block set connection type can be used to design buildings snaking precast concrete structures in seismic regions 5 and 6 (the area of high seismic risk. Penggunaan Block Set Connection (BSC pada Sambungan Elemen Beton Precast.  Teknologi beton precast merupakan alternatif pilihan dari konstruksi beton bertulang dengan keunggulan mutu yang tinggi dan biaya yang ekonomis. Namun demikian beton precast belum banyak digunakan untuk daerah gempa karena  mempunyai kelemahan pada sambungan antar elemen beton precast yang tidak daktail. Tujuan penelitian ini adalah mengetahui daktilitas sambungan beton precast, yang menggunakan tipe block set connection (BSC. Rancangan sambungan balok kolom menggunakan teori  full ductile  yang menggunakan 2 buah benda uji dalam skala 1:1, diuji dengan beban siklik dan dianalisis terhadap daktilitas, kekuatan, kekakuan, disipasi energi, dan pola keruntuhan. Hasil eksperimen diperoleh nilai daktilitas rerata μ = 6,  pencapaian nilai daktilitas  tersebut lebih besar dari

Solvothermal synthesis of TiO{sub 2} nanocrystals with {001} facets using titanic acid nanobelts for superior photocatalytic activity

Energy Technology Data Exchange (ETDEWEB)

Cao, Yuhui; Zong, Lanlan [National & Local Joint Engineering Research Center for Applied Technology of Hybrid Nanomaterials, Henan University, Kaifeng, 475004 (China); Li, Qiuye, E-mail: qiuyeli@henu.edu.cn [National & Local Joint Engineering Research Center for Applied Technology of Hybrid Nanomaterials, Henan University, Kaifeng, 475004 (China); Collaborative Innovation Center of Nano Functional Materials and Applications of Henan Province, Henan University, Kaifeng, 475004 (China); Li, Chen; Li, Junli [National & Local Joint Engineering Research Center for Applied Technology of Hybrid Nanomaterials, Henan University, Kaifeng, 475004 (China); Yang, Jianjun, E-mail: yangjianjun@henu.edu.cn [National & Local Joint Engineering Research Center for Applied Technology of Hybrid Nanomaterials, Henan University, Kaifeng, 475004 (China); Collaborative Innovation Center of Nano Functional Materials and Applications of Henan Province, Henan University, Kaifeng, 475004 (China)

2017-01-01

Highlights: • TiO{sub 2} exposed with {001} facets were firstly prepared using TAN as Ti source. • The mineralization rate of MO on sample with 77% {001} facets was as high as 96%. • The superior photocatalytic activity was greatly due to {001} facets exposing. - Abstract: Anatase TiO{sub 2} nanocrystals exposed with {001} facets were fabricated by solvothermal strategy in HF-C{sub 4}H{sub 9}OH mixed solution, using titanic acid nanobelts (TAN) as a precursor. The shape of TAN is a long flat plane with a high aspect ratio, and F{sup −} is easily adsorbed on the surface of the nanobelts, inducing a higher exposure of {001} facet of TiO{sub 2} nanoparticles during the structure reorganization. The exposed percentage of {001} facets could vary from 40 to 77% by adjusting the amount of HF. The as-prepared samples were characterized by transmission electron microscopy, N{sub 2} adsorption-desorption isotherms, X-ray diffraction, Raman spectroscopy, and X-ray photoelectron spectroscope. The photocatalytic measurement showed that TiO{sub 2} nanocrystals with 77% {001} facets exhibited much superior photocatalytic activity for photodegradation of methyl orange, methylene blue, and rhodamine B. And what’s more, the mineralization rate of methyl orange was as high as 96% within 60 min. The photocatalytic enhancement is due to a large amount of the high energetic {001} facets exposing, the special truncated octahedral morphology and a stronger ability for dyes adsorption.

Contemporary cybernetics and its facets of cognitive informatics and computational intelligence.

Science.gov (United States)

Wang, Yingxu; Kinsner, Witold; Zhang, Du

2009-08-01

This paper explores the architecture, theoretical foundations, and paradigms of contemporary cybernetics from perspectives of cognitive informatics (CI) and computational intelligence. The modern domain and the hierarchical behavioral model of cybernetics are elaborated at the imperative, autonomic, and cognitive layers. The CI facet of cybernetics is presented, which explains how the brain may be mimicked in cybernetics via CI and neural informatics. The computational intelligence facet is described with a generic intelligence model of cybernetics. The compatibility between natural and cybernetic intelligence is analyzed. A coherent framework of contemporary cybernetics is presented toward the development of transdisciplinary theories and applications in cybernetics, CI, and computational intelligence.

Phase measuring deflectometry. An improved setup for measuring CTA mirror facets

Energy Technology Data Exchange (ETDEWEB)

Specovius, Andreas; Eldik, Christopher van; Woernlein, Andre; Ziegler, Alexander [Erlangen Centre for Astroparticle Physics (ECAP) (Germany)

2016-07-01

The future Cherenkov Telescope Array (CTA) will consist of up to 100 single telescopes with a total reflecting surface of ∝10.000 m{sup 2} made of numerous mirror facets. Characterizing the surface properties of these facets is quite challenging concerning time and logistics. An efficient way to reliably reconstruct the surface of specular free-forms is Phase Measuring Deflectometry (PMD). PMD is routinely used to characterize the focal distance and point spread function of spherical CTA prototype mirrors. To address the possibility to measure the surface properties of aspherical mirrors, a new PMD setup has recently been built. First experience with this setup is reported.

Medial branch neurotomy in low back pain

International Nuclear Information System (INIS)

Masala, Salvatore; Mammucari, Matteo; Simonetti, Giovanni; Nano, Giovanni; Marcia, Stefano

2012-01-01

This study aimed to assess the effectiveness of pulsed radiofrequency medial branch dorsal ramus neurotomy in patients with facet joint syndrome. From January 2008 to April 2010, 92 patients with facet joint syndrome diagnosed by strict inclusion criteria and controlled diagnostic blocks undergone medial branch neurotomy. We did not exclude patients with failed back surgery syndrome (FBSS). Electrodes (20G) with 5-mm active tip were placed under fluoroscopy guide parallel to medial branch. Patients were followed up by physical examination and by Visual Analog Scale and Oswestry Disability Index at 1, 6, and 12 months. In all cases, pain improvement was statistically significant and so quality of life. Three non-FBSS patients had to undergo a second neurotomy because of non-satisfactory pain decrease. Complications were reported in no case. Medial branch radiofrequency neurotomy has confirmed its well-established effectiveness in pain and quality of life improvement as long as strict inclusion criteria be fulfilled and nerve ablation be accomplished by parallel electrode positioning. This statement can be extended also to FBSS patients. (orig.)

Medial branch neurotomy in low back pain

Energy Technology Data Exchange (ETDEWEB)

Masala, Salvatore; Mammucari, Matteo; Simonetti, Giovanni [Interventional Radiology and Radiotherapy University ' ' Tor Vergata' ' , Department of Diagnostic and Molecular Imaging, Rome (Italy); Nano, Giovanni [Interventional Radiology and Radiotherapy University ' ' Tor Vergata' ' , Department of Diagnostic and Molecular Imaging, Rome (Italy); University ' ' Tor Vergata' ' , Department of Radiology, Rome (Italy); Marcia, Stefano [S. Giovanni di Dio Hospital, Department of Diagnostic and Molecular Imaging, Cagliari (Italy)

2012-07-15

This study aimed to assess the effectiveness of pulsed radiofrequency medial branch dorsal ramus neurotomy in patients with facet joint syndrome. From January 2008 to April 2010, 92 patients with facet joint syndrome diagnosed by strict inclusion criteria and controlled diagnostic blocks undergone medial branch neurotomy. We did not exclude patients with failed back surgery syndrome (FBSS). Electrodes (20G) with 5-mm active tip were placed under fluoroscopy guide parallel to medial branch. Patients were followed up by physical examination and by Visual Analog Scale and Oswestry Disability Index at 1, 6, and 12 months. In all cases, pain improvement was statistically significant and so quality of life. Three non-FBSS patients had to undergo a second neurotomy because of non-satisfactory pain decrease. Complications were reported in no case. Medial branch radiofrequency neurotomy has confirmed its well-established effectiveness in pain and quality of life improvement as long as strict inclusion criteria be fulfilled and nerve ablation be accomplished by parallel electrode positioning. This statement can be extended also to FBSS patients. (orig.)

Spontaneous resolution of symptoms associated with a facet synovial cyst in an adult female – a case report

Science.gov (United States)

Ngo, Trung; Decina, Philip; Hsu, William

2013-01-01

Background: Facet cysts are implicated in neural compression in the lumbar spine. Surgery is the definitive treatment for symptomatic facet cysts since the failure rate for conservative treatment is quite high; however, the role of physical/manual medicine practitioners in the management of symptomatic facet cysts has not been well explored. This case report will add to the body of evidence of spontaneous resolution of symptoms associated with facet cysts in the chiropractic literature. Case: A 58 year old female presented with acute low back and right leg pain which she attributed to a series of exercise classes that involved frequent foot stomping. Physical examination did not elicit any objective evidence of radiculopathy but MRI and CT scans revealed a facet cyst impinging on the right L5 nerve root. Injections and surgery were recommended; however, the patient’s radicular symptoms completely resolved after three months without surgical intervention. Summary: There is currently a paucity of data in the literature regarding the chiropractor’s role in the management of symptomatic facet cysts. The case presented here has added to this literature and possible areas for future research have been explored. PMID:23483069

Fabrication of etched facets and vertical couplers in InP for packaging and on-wafer test

NARCIS (Netherlands)

Lemos Alvares Dos Santos, Rui; D'Agostino, D.; Soares, F. M.; Haghighi, H. Rabbani; Williams, K. A.; Leijtens, X. J. M.

2016-01-01

In this letter, the fabrication and the characterization of angled and straight etched facets in InP-based technology are reported. In addition, we report on etched facets combined with coupler mirrors for vertical outcoupling, realized with a wet-etching process.

Facile Synthesis of Gold Nanorice Enclosed by High- Index Facets and Its Application for CO Oxidation

International Nuclear Information System (INIS)

Zheng, Y.; Tao, J.; Liu, H.; Zeng, J.; Yu, T.; Ma, Y.; Moran, C.; Wu, L.; Zhu, Y.; Liu, J.; Xia, Y.

2011-01-01

A facile method for generating Au nanorice enclosed by high-index facets in high purity. The nanorice shows much higher catalytic activity for CO oxidation than multiply twinned particles of Au enclosed by {111} facets at temperatures below 300 C.

The role of PET/CT in evaluation of Facet and Disc abnormalities in patients with low back pain using 18Fluorine

International Nuclear Information System (INIS)

Gamie, S.; El-Maghraby, T.

2008-01-01

Bone scintigraphy including Single Photon Emission Computed Tomography (SPECT) is known for its role in the diagnosis of low back pain disorders. Positron Emission Tomography (PET) with 18 Fluoride) as a tracer can be used to carry out bone scans with improved image quality. With the addition of CT, simultaneous PET/CT fused images provide more accurate anatomical details. The objectives of this work are E VCT 64-Slice combined scanner. Imaging started 45-60 minutes after administration of 12-15 mCi (444-55 MBq) of 18 F-Fluoride. The PET scan was acquired from the skull base through the inguinal region in 3D mode at 2 minutes/bed. A low resolution, non-contrast CT scan was also acquired for anatomic localization and attenuation correction. The 18 F-PET/CT showed abnormal uptake in the spine in 56 patients, with an overall detection ability of 84%. Facet joints as a cause of back pain was much more frequent (25 with abnormal scans). One-third (36%) of the patients showed multiple positive uptake in both facet joints and disc areas (20/56). The patients were further divided into two groups. Group A consisted of 42 patients (63%) with back pain and no previous operative procedures, and the 18 F-PET/CT showed a high sensitivity (88%) in identifying the source of pain in 37/42 patients. Group B included 25 patients (37%) with prior lumbar fusion or laminectomy, in which the PET/CT showed positive uptake in 76% (19/25 patients). 18 F-PET/CT showed positive uptake in all patients (100%) with a history of pain after lumbar fusion, while in the laminectomy subgroup only 11 cases (65%) showed positive focal uptake. 18 FPET-CT has potential use in evaluating adult patients with back pain. It has a promising role in identifying causes of persistent back pain following vertebral surgical interventions. (authors)

An observational feasibility study to assess the safety and effectiveness of intranasal fentanyl for radiofrequency ablations of the lumbar facet joints

Directory of Open Access Journals (Sweden)

Bartoszek MW

2017-02-01

Full Text Available Michael W Bartoszek,1 Amy McCoart,2 Kyung-soo Jason Hong,3 Chelsey Haley,2 Krista Beth Highland,4 Anthony R Plunkett1 1Department of Anesthesiology, Womack Army Medical Center, Fort Bragg, NC, 2Clinical Investigations, Defense and Veterans Center for Integrative Pain Management, Henry M. Jackson Foundation, Womack Army Medical Center, Fort Bragg, NC, 3Research Department, The Center for Clinical Research, Sceptor Pain Foundation, Winston Salem, NC, 4Defense and Veterans Center for Integrative Pain Management, Henry M. Jackson Foundation, Uniformed Services University, Bethesda, MD, USA Purpose: The purpose of the present observational, feasibility study is to assess the preliminary safety and effectiveness of intranasal fentanyl for lumbar facet radiofrequency ablation procedures.Patients and methods: This cohort observational study included 23 adult patients. Systolic and diastolic blood pressures, heart rate, oxygen saturation percent, Pasero Opioid-Induced Sedation Scale score, and the Defense and Veterans Pain Rating Scale pain score were assessed prior to the procedure and intranasal fentanyl (100 μg administration and every 15 minutes after administration, up to 60 minutes post administration. Follow-up of patient satisfaction with pain control and treatment was assessed 24 hours after discharge. The primary outcome was safety as evidenced by adverse events. Secondary outcomes included the above-mentioned vital signs and pain ratings.Results: No adverse events occurred in the present study and all participants maintained an acceptable level of awareness throughout the assessment period. One-way repeated measures analyses of covariance tests with Bonferroni-adjusted means indicated that oxygen saturation, blood pressure, and heart rate changed from baseline, whereas pain scores were lower at post-administration levels compared with baseline. Finally, the majority of participants reported being satisfied with pain control and treatment

An efficient, block-by-block algorithm for inverting a block tridiagonal, nearly block Toeplitz matrix

International Nuclear Information System (INIS)

Reuter, Matthew G; Hill, Judith C

2012-01-01

We present an algorithm for computing any block of the inverse of a block tridiagonal, nearly block Toeplitz matrix (defined as a block tridiagonal matrix with a small number of deviations from the purely block Toeplitz structure). By exploiting both the block tridiagonal and the nearly block Toeplitz structures, this method scales independently of the total number of blocks in the matrix and linearly with the number of deviations. Numerical studies demonstrate this scaling and the advantages of our method over alternatives.

Pulsed Dose Radiofrequency Before Ablation of Medial Branch of the Lumbar Dorsal Ramus for Zygapophyseal Joint Pain Reduces Post-procedural Pain.

Science.gov (United States)

Arsanious, David; Gage, Emmanuel; Koning, Jonathon; Sarhan, Mazin; Chaiban, Gassan; Almualim, Mohammed; Atallah, Joseph

2016-01-01

center. The procedures were exclusively performed using one model of radiofrequency generator, at one setting for the PDRF and RFA. The difference in the number of levels of ablation was not considered in the analysis of the results. Treating patients with pulsed dose radiofrequency prior to continuous thermal radiofrequency ablation can provide patients with less post-procedural pain during the first 24 hours and also reduce analgesic requirements. Furthermore, the addition of PDRF to standard thermal RFA did not prolong the time of standard thermal radiofrequency ablation procedures, as it was performed during the typically allotted time for local anesthetic action. Low back pain, facet joint disease, medial branch block, Radiofrequency ablation, thermal radiofrequency, pulsed dose radiofrequency, PDRF, zygapophyseal joint.

Two-year follow-up results of fluoroscopic cervical epidural injections in chronic axial or discogenic neck pain: a randomized, double-blind, controlled trial.

Science.gov (United States)

Manchikanti, Laxmaiah; Cash, Kimberly A; Pampati, Vidyasagar; Malla, Yogesh

2014-01-01

A randomized, double-blind, active-controlled trial. To assess the effectiveness of cervical interlaminar epidural injections of local anesthetic with or without steroids for the management of axial or discogenic pain in patients without disc herniation, radiculitis, or facet joint pain. Cervical discogenic pain without disc herniation is a common cause of suffering and disability in the adult population. Once conservative management has failed and facet joint pain has been excluded, cervical epidural injections may be considered as a management tool. Despite a paucity of evidence, cervical epidural injections are one of the most commonly performed nonsurgical interventions in the management of chronic axial or disc-related neck pain. One hundred and twenty patients without disc herniation or radiculitis and negative for facet joint pain as determined by means of controlled diagnostic medial branch blocks were randomly assigned to one of the 2 treatment groups. Group I patients received cervical interlaminar epidural injections of local anesthetic (lidocaine 0.5%, 5 mL), whereas Group II patients received 0.5% lidocaine, 4 mL, mixed with 1 mL or 6 mg of nonparticulate betamethasone. The primary outcome measure was ≥ 50% improvement in pain and function. Outcome assessments included numeric rating scale (NRS), Neck Disability Index (NDI), opioid intake, employment, and changes in weight. Significant pain relief and functional improvement (≥ 50%) was present at the end of 2 years in 73% of patients receiving local anesthetic only and 70% receiving local anesthetic with steroids. In the successful group of patients, however, defined as consistent relief with 2 initial injections of at least 3 weeks, significant improvement was illustrated in 78% in the local anesthetic group and 75% in the local anesthetic with steroid group at the end of 2 years. The results reported at the one-year follow-up were sustained at the 2-year follow-up. Cervical interlaminar epidural

Obtaining Content Weights for Test Specifications from Job Analysis Task Surveys: An Application of the Many-Facets Rasch Model

Science.gov (United States)

Wang, Ning; Stahl, John

2012-01-01

This article discusses the use of the Many-Facets Rasch Model, via the FACETS computer program (Linacre, 2006a), to scale job/practice analysis survey data as well as to combine multiple rating scales into single composite weights representing the tasks' relative importance. Results from the Many-Facets Rasch Model are compared with those…

Within-trait heterogeneity in age group differences in personality domains and facets: implications for the development and coherence of personality traits.

Science.gov (United States)

Mõttus, René; Realo, Anu; Allik, Jüri; Esko, Tõnu; Metspalu, Andres; Johnson, Wendy

2015-01-01

The study investigated differences in the Five-Factor Model (FFM) domains and facets across adulthood. The main questions were whether personality scales reflected coherent units of trait development and thereby coherent personality traits more generally. These questions were addressed by testing if the components of the trait scales (items for facet scales and facets for domain scales) showed consistent age group differences. For this, measurement invariance (MI) framework was used. In a sample of 2,711 Estonians who had completed the NEO Personality Inventory 3 (NEO PI-3), more than half of the facet scales and one domain scale did not meet the criterion for weak MI (factor loading equality) across 12 age groups spanning ages from 18 to 91 years. Furthermore, none of the facet and domain scales met the criterion for strong MI (intercept equality), suggesting that items of the same facets and facets of the same domains varied in age group differences. When items were residualized for their respective facets, 46% of them had significant (p < 0.0002) residual age-correlations. When facets were residualized for their domain scores, a majority had significant (p < 0.002) residual age-correlations. For each domain, a series of latent factors were specified using random quarters of their items: scores of such latent factors varied notably (within domains) in correlations with age. We argue that manifestations of aetiologically coherent traits should show similar age group differences. Given this, the FFM domains and facets as embodied in the NEO PI-3 do not reflect aetiologically coherent traits.

Personality Facets and RIASEC Interests: An Integrated Model

Science.gov (United States)

Armstrong, Patrick Ian; Anthoney, Sarah Fetter

2009-01-01

Research examining links between personality and interest have typically focused on links between measures of the five factor model and Holland's RIASEC types. However, the five factor model of personality can be divided in to a larger set of narrow domain personality scales measuring facets of the "big five" traits. Research in a number of fields…

A note on clique-web facets for multicut polytopes

DEFF Research Database (Denmark)

Sørensen, Michael Malmros

2002-01-01

In this note we provide a previously undiscovered necessary condition for the facet-defining property of clique-web inequalities for the multicut polytope. This condition imposes a minimum cardinality requirement on the node set of the clique, thus implying, in general, that clique-web inequaliti...

The sacroiliac joint: anatomy, physiology and clinical significance.

Science.gov (United States)

Forst, Stacy L; Wheeler, Michael T; Fortin, Joseph D; Vilensky, Joel A

2006-01-01

The sacroiliac joint (SIJ) is a putative source of low back pain. The objective of this article is to provide clinicians with a concise review of SIJ structure and function, diagnostic indicators of SIJ-mediated pain, and therapeutic considerations. The SIJ is a true diarthrodial joint with unique characteristics not typically found in other diarthrodial joints. The joint differs with others in that it has fibrocartilage in addition to hyaline cartilage, there is discontinuity of the posterior capsule, and articular surfaces have many ridges and depressions. The sacroiliac joint is well innervated. Histological analysis of the sacroiliac joint has verified the presence of nerve fibers within the joint capsule and adjoining ligaments. It has been variously described that the sacroiliac joint receives its innervation from the ventral rami of L4 and L5, the superior gluteal nerve, and the dorsal rami of L5, S1, and S2, or that it is almost exclusively derived from the sacral dorsal rami. Even though the sacroiliac joint is a known putative source of low back and lower extremity pain, there are few findings that are pathognomonic of sacroiliac joint pain. The controlled diagnostic blocks utilizing the International Association for the Study of Pain (IASP) criteria demonstrated the prevalence of pain of sacroiliac joint origin in 19% to 30% of the patients suspected to have sacroiliac joint pain. Conservative management includes manual medicine techniques, pelvic stabilization exercises to allow dynamic postural control, and muscle balancing of the trunk and lower extremities. Interventional treatments include sacroiliac joint, intra-articular joint injections, radiofrequency neurotomy, prolotherapy, cryotherapy, and surgical treatment. The evidence for intra-articular injections and radiofrequency neurotomy has been shown to be limited in managing sacroiliac joint pain.

Diagnostic accuracy of low-dose versus ultra-low-dose CT for lumbar disc disease and facet joint osteoarthritis in patients with low back pain with MRI correlation

Energy Technology Data Exchange (ETDEWEB)

Lee, Sun Hwa [Inje University College of Medicine, Department of Emergency Medicine, Sanggye Paik Hospital, Nowon-gu (Korea, Republic of); Yun, Seong Jong; Jo, Hyeon Hwan; Kim, Dong Hyeon [Republic of Korea Air Force, Department of Radiology, Aerospace Medical Center, Cheongwon-gun, Chungcheongbuk-do (Korea, Republic of); Song, Jae Gwang [Republic of Korea Air Force, Department of Orthopedic Surgery, Aerospace Medical Center, Cheongwon-gun, Chungcheongbuk-do (Korea, Republic of); Park, Yong Sung [Kyung Hee University Hospital at Gangdong, Kyung Hee University School of Medicine, Department of Radiology, Seoul (Korea, Republic of)

2018-04-15

To compare the image quality, radiation dose, and diagnostic performance between low-dose (LD) and ultra-low-dose (ULD) lumbar-spine (L-spine) CT with iterative reconstruction (IR) for patients with chronic low back pain (LBP). In total, 260 patients with chronic LBP who underwent L-spine CT between November 2015 and September 2016 were prospectively enrolled. Of these, 143 underwent LD-CT with IR and 117 underwent ULD-CT with IR. The patients were divided according to their body mass index (BMI) into BMI1 (<22.9 kg/m{sup 2}), BMI2 (23.0-24.9 kg/m{sup 2}), and BMI3 (≥25 kg/m{sup 2}) groups. Two blinded radiologists independently evaluated the signal-to-noise ratio (SNR), qualitative image quality, and final diagnoses (lumbar disc disease and facet joint osteoarthritis). L-spine MRIs interpreted by consensus were used as the reference standard. All data were statistically analyzed. ULD protocol showed significantly lower SNR for all patients (p < 0.001) except the vertebral bodies and lower qualitative image quality for BMI3 patients (p ≤ 0.033). There was no statistically significant difference between ULD (sensitivity, 95.1-98.1%; specificity, 92.5-98.7%; accuracy, 94.6-98.0%) and LD protocols (sensitivity, 95.6-100%; specificity, 95.5-98.9%; accuracy, 97.4-98.1%), (all p≥0.1) in the BMI1 and BMI2; while dose was 60-68% lower with the ULD protocol. Interobserver agreements were excellent or good with regard to image quality and final diagnoses. For the BM1 and BMI2 groups, ULD-CT provided an acceptable image quality and exhibited a diagnostic accuracy similar to that of LD-CT. These findings suggest that it is a useful diagnostic tool for patients with chronic LBP who exhibit a BMI of <25 kg/m{sup 2}. (orig.)

Diagnostic accuracy of low-dose versus ultra-low-dose CT for lumbar disc disease and facet joint osteoarthritis in patients with low back pain with MRI correlation

International Nuclear Information System (INIS)

Lee, Sun Hwa; Yun, Seong Jong; Jo, Hyeon Hwan; Kim, Dong Hyeon; Song, Jae Gwang; Park, Yong Sung

2018-01-01

To compare the image quality, radiation dose, and diagnostic performance between low-dose (LD) and ultra-low-dose (ULD) lumbar-spine (L-spine) CT with iterative reconstruction (IR) for patients with chronic low back pain (LBP). In total, 260 patients with chronic LBP who underwent L-spine CT between November 2015 and September 2016 were prospectively enrolled. Of these, 143 underwent LD-CT with IR and 117 underwent ULD-CT with IR. The patients were divided according to their body mass index (BMI) into BMI1 (<22.9 kg/m 2 ), BMI2 (23.0-24.9 kg/m 2 ), and BMI3 (≥25 kg/m 2 ) groups. Two blinded radiologists independently evaluated the signal-to-noise ratio (SNR), qualitative image quality, and final diagnoses (lumbar disc disease and facet joint osteoarthritis). L-spine MRIs interpreted by consensus were used as the reference standard. All data were statistically analyzed. ULD protocol showed significantly lower SNR for all patients (p < 0.001) except the vertebral bodies and lower qualitative image quality for BMI3 patients (p ≤ 0.033). There was no statistically significant difference between ULD (sensitivity, 95.1-98.1%; specificity, 92.5-98.7%; accuracy, 94.6-98.0%) and LD protocols (sensitivity, 95.6-100%; specificity, 95.5-98.9%; accuracy, 97.4-98.1%), (all p≥0.1) in the BMI1 and BMI2; while dose was 60-68% lower with the ULD protocol. Interobserver agreements were excellent or good with regard to image quality and final diagnoses. For the BM1 and BMI2 groups, ULD-CT provided an acceptable image quality and exhibited a diagnostic accuracy similar to that of LD-CT. These findings suggest that it is a useful diagnostic tool for patients with chronic LBP who exhibit a BMI of <25 kg/m 2 . (orig.)

Personality and externalizing behavior in the transition to young adulthood: the additive value of personality facets.

Science.gov (United States)

Klimstra, Theo A; Luyckx, Koen; Hale Iii, William W; Goossens, Luc

2014-08-01

The directionality of effects in the associations between personality and externalizing behavior (i.e., delinquency, soft drugs use, and alcohol abuse) is unclear. Moreover, previous studies only examined personality trait domains when examining these associations, whereas personality facets underlying these broad domains provide more specificity. To address these limitations, the present study examined the directionality of effects between externalizing behavior and personality while employing a facet-level approach to personality. Cross-lagged panel models were employed to four annual measurement waves of longitudinal data on 485 Belgian-Caucasian late adolescents (87.4 % female; M age = 18.63 years, SD = 0.61). Participants filled out the NEO-FFI as a measure of personality, the Deviant Behavior Scale as a measure of delinquency, and single items for soft drugs use and alcohol abuse on all four measurement occasions. The incremental value of personality facets over broad trait domains was demonstrated, as it was often the case that only some, but not all, facets underlying a specific trait domain were significantly associated with specific externalizing behaviors. Furthermore, linkages between personality and externalizing behavior were shown to be complex. Depending on the personality trait domain or facet and the specific behavior under investigation, the directionality of effects may differ. To capture the full complexity of the linkages between personality and externalizing behavior, a facet approach to personality is recommended. This information is potentially important for clinicians, as it indicates which specific aspects of a broad trait domain affect, and are affected by, specific externalizing behaviors.

CW operation of high-power blue laser diodes with polished facets on semi-polar ( 20 2 ¯ 1 ¯ ) GaN substrates

KAUST Repository

Pourhashemi, A.

2016-10-11

Continuous wave (CW) operation of high-power blue laser diodes (LDs) with polished facets on semi-polar (202̅1̅) gallium nitride (GaN) substrates is demonstrated. Ridge waveguide LDs were fabricated using indium GaN waveguiding layers and GaN cladding layers. At a lasing wavelength of 452 nm, the peak two-facet CW output power from an LD with uncoated facets was 1.71 W at a current of 3 A, corresponding to an optical power density of 32.04 MW/cm2 on each facet. The dependence of output power on current did not change with repeated CW measurements, indicating that the polished facets did not degrade under high-power CW operation. These results show that polished facets are a viable alternative to cleaved or etched facets for high-power CW semi-polar LDs.

CW operation of high-power blue laser diodes with polished facets on semi-polar ( 20 2 ¯ 1 ¯ ) GaN substrates

KAUST Repository

Pourhashemi, A.; Farrell, R.M.; Cohen, D.A.; Becerra, D.L.; DenBaars, S.P.; Nakamura, S.

2016-01-01

Continuous wave (CW) operation of high-power blue laser diodes (LDs) with polished facets on semi-polar (202̅1̅) gallium nitride (GaN) substrates is demonstrated. Ridge waveguide LDs were fabricated using indium GaN waveguiding layers and GaN cladding layers. At a lasing wavelength of 452 nm, the peak two-facet CW output power from an LD with uncoated facets was 1.71 W at a current of 3 A, corresponding to an optical power density of 32.04 MW/cm2 on each facet. The dependence of output power on current did not change with repeated CW measurements, indicating that the polished facets did not degrade under high-power CW operation. These results show that polished facets are a viable alternative to cleaved or etched facets for high-power CW semi-polar LDs.

Final Report for Project "Framework Application for Core-Edge Transport Simulations (FACETS)"

Energy Technology Data Exchange (ETDEWEB)

Estep, Donald [Colorado State Univ., Fort Collins, CO (United States)

2014-01-17

This is the final report for the Colorado State University Component of the FACETS Project. FACETS was focused on the development of a multiphysics, parallel framework application that could provide the capability to enable whole-device fusion reactor modeling and, in the process, the development of the modeling infrastructure and computational understanding needed for ITER. It was intended that FACETS be highly flexible, through the use of modern computational methods, including component technology and object oriented design, to facilitate switching from one model to another for a given aspect of the physics, and making it possible to use simplified models for rapid turnaround or high-fidelity models that will take advantage of the largest supercomputer hardware. FACETS was designed in a heterogeneous parallel context, where different parts of the application can take advantage through parallelism based on task farming, domain decomposition, and/or pipelining as needed and applicable. As with all fusion simulations, an integral part of the FACETS project was treatment of the coupling of different physical processes at different scales interacting closely. A primary example for the FACETS project is the coupling of existing core and edge simulations, with the transport and wall interactions described by reduced models. However, core and edge simulations themselves involve significant coupling of different processes with large scale differences. Numerical treatment of coupling is impacted by a number of factors including, scale differences, form of information transferred between processes, implementation of solvers for different codes, and high performance computing concerns. Operator decomposition involving the computation of the individual processes individually using appropriate simulation codes and then linking/synchronizing the component simulations at regular points in space and time, is the defacto approach to high performance simulation of multiphysics

The Role of Shape on Electronic Structure and Charge Transport in Faceted PbSe Nanocrystals

KAUST Repository

Kaushik, Ananth P.

2014-03-25

We have determined the effect of shape on the charge transport characteristics of nanocrystals. Our study looked at the explicit determination of the electronic properties of faceted nanocrystals that essentially probe the limit of current computational reach, i.e., nanocrystals from 1.53 to 2.1 nm in diameter. These nanocrystals, which resemble PbSe systems, are either bare or covered in short ligands. They also differ in shape, octahedral vs cube-octahedral, and in superlattice symmetry (fcc vs bcc). We have provided insights on electron and hole coupling along different facets and overall charge mobility in bcc and fcc superlattices. We have determined that the relative areas of (100) to (111) facets, and facet atom types are important factors governing the optimization of charge transport. The calculated electronic density of states shows no role of -SCH3 - ligands on states near the band gap. Electron coupling between nanocrystals is significantly higher than that of hole coupling; thiol ligands lower the ratio between electron and hole couplings. Stronger coupling exists between smaller nanocrystals. © 2014 American Chemical Society.

Conscientiousness, openness to experience and extraversion as predictors of nursing work performance: a facet-level analysis.

Science.gov (United States)

Ellershaw, Julia; Fullarton, Christie; Rodwell, John; Mcwilliams, John

2016-03-01

This study examined the relationships between the personality traits of conscientiousness, openness and extraversion at trait and facet-levels and three indicators of work role performance; proficiency, 'adaptivity' and proactivity measured at individual, team and organisational levels. This is one of the first studies to explore the relationship between personality, measured at trait and facet-level and performance using a comprehensive range of performance indicators. An online survey of 393 nurses from health-care organisations across Australia was conducted to test hypothesised relationships. Path analyses revealed numerous relationships between personality, measured at both trait and facet-levels, and work role performance. Conscientiousness was highlighted as the strongest driver of work role performance across all the indicators, with extraversion also strongly associated with work role performance. Openness to experience, previously considered a week predictor of performance, was, when examined at the facet-level, related to all of the work role performance indicators. Results suggests a bandwidth effect, where the personality traits drive global performance while the facets drive specific performance. Better understanding of the relationship between personality and work role performance will help nurse managers to foster the fit between individual and organisation, improving job satisfaction, engagement, retention and performance in role. © 2015 John Wiley & Sons Ltd.

Numerical Modeling of Earthquake-Induced Landslide Using an Improved Discontinuous Deformation Analysis Considering Dynamic Friction Degradation of Joints

Science.gov (United States)

Huang, Da; Song, Yixiang; Cen, Duofeng; Fu, Guoyang

2016-12-01

Discontinuous deformation analysis (DDA) as an efficient technique has been extensively applied in the dynamic simulation of discontinuous rock mass. In the original DDA (ODDA), the Mohr-Coulomb failure criterion is employed as the judgment principle of failure between contact blocks, and the friction coefficient is assumed to be constant in the whole calculation process. However, it has been confirmed by a host of shear tests that the dynamic friction of rock joints degrades. Therefore, the friction coefficient should be gradually reduced during the numerical simulation of an earthquake-induced rockslide. In this paper, based on the experimental results of cyclic shear tests on limestone joints, exponential regression formulas are fitted for dynamic friction degradation, which is a function of the relative velocity, the amplitude of cyclic shear displacement and the number of its cycles between blocks with an edge-to-edge contact. Then, an improved DDA (IDDA) is developed by implementing the fitting regression formulas and a modified removing technique of joint cohesion, in which the cohesion is removed once the `sliding' or `open' state between blocks appears for the first time, into the ODDA. The IDDA is first validated by comparing with the theoretical solutions of the kinematic behaviors of a sliding block on an inclined plane under dynamic loading. Then, the program is applied to model the Donghekou landslide triggered by the 2008 Wenchuan earthquake in China. The simulation results demonstrate that the dynamic friction degradation of joints has great influences on the runout and velocity of sliding mass. Moreover, the friction coefficient possesses higher impact than the cohesion of joints on the kinematic behaviors of the sliding mass.

Rational Design of Tunnel Supports: An Interactive Graphics Based Analysis of the Support Requirements of Excavations in Jointed Rock Masses.

Science.gov (United States)

1979-09-01

joint orientetion and joint slippage than to failure of the intact rock mass. Dixon (1971) noted the importance of including the confining influence of...dedicated computer. The area of research not covered by this investigation which holds promise for a future study is a detailed comparison of the results of...block data, type key "W". The program writes this data on Linc tapes for future retripval. This feature can be used to store the consolidated block

Conceptualizing Educational Leadership: Does Exploring Macro-Level Facets Matters?

Science.gov (United States)

Sinha, Chetan

2013-01-01

The present review attempts to examine the present status of educational leadership highlighting the role of macro-level facets in Asian Pacific context. The conceptualization of educational leadership among researchers so far had been found to vary according to different contexts and situations. Theoretical perspectives associated with…

Radon penetration of concrete slab cracks, joints, pipe penetrations, and sealants

NARCIS (Netherlands)

Nielson, KK; Rogers, VC; Holt, RB; Pugh, TD; Grondzik, WA; deMeijer, RJ

1997-01-01

Radon movement through 12 test slabs with different cracks, pipe penetrations, cold joints, masonry blocks, sealants, and tensile stresses characterized the importance of these anomalous structural domains, Diffusive and advective radon transport were measured with steady-state air pressure

Using Facet Clusters to Map Learner Modes of Reasoning

Science.gov (United States)

Vokos, Stamatis; DeWater, L. S.; Seeley, L.; Kraus, P.

2006-12-01

The Department of Physics and the School of Education at Seattle Pacific University, together with FACET Innovations, LLC, are beginning the second year of a five-year NSF TPC project, Improving the Effectiveness of Teacher Diagnostic Skills and Tools. We are working in partnership with school districts in Washington State to use formative assessment as a means to helping teachers and precollege students deepen their understanding of foundational topics in physical science. We utilize a theoretical framework of knowledge-in-pieces to identify and categorize widespread productive and unproductive modes of reasoning in the topical areas of Properties of Matter, Heat and Temperature, and Physical and Chemical Changes. In this talk, we describe the development and iterative refinement of certain facet clusters of student ideas, as well as the usefulness and limitations of such a mapping scheme. * Supported in part by NSF grant #ESI-0455796, The Boeing Corporation, and the SPU Science Initiative.

Agreement between diagnoses reached by clinical examination and available reference standards: a prospective study of 216 patients with lumbopelvic pain

Directory of Open Access Journals (Sweden)

Tropp Hans

2005-06-01

Full Text Available Abstract Background The tissue origin of low back pain (LBP or referred lower extremity symptoms (LES may be identified in about 70% of cases using advanced imaging, discography and facet or sacroiliac joint blocks. These techniques are invasive and availability varies. A clinical examination is non-invasive and widely available but its validity is questioned. Diagnostic studies usually examine single tests in relation to single reference standards, yet in clinical practice, clinicians use multiple tests and select from a range of possible diagnoses. There is a need for studies that evaluate the diagnostic performance of clinical diagnoses against available reference standards. Methods We compared blinded clinical diagnoses with diagnoses based on available reference standards for known causes of LBP or LES such as discography, facet, sacroiliac or hip joint blocks, epidurals injections, advanced imaging studies or any combination of these tests. A prospective, blinded validity design was employed. Physiotherapists examined consecutive patients with chronic lumbopelvic pain and/or referred LES scheduled to receive the reference standard examinations. When diagnoses were in complete agreement regardless of complexity, "exact" agreement was recorded. When the clinical diagnosis was included within the reference standard diagnoses, "clinical agreement" was recorded. The proportional chance criterion (PCC statistic was used to estimate agreement on multiple diagnostic possibilities because it accounts for the prevalence of individual categories in the sample. The kappa statistic was used to estimate agreement on six pathoanatomic diagnoses. Results In a sample of chronic LBP patients (n = 216 with high levels of disability and distress, 67% received a patho-anatomic diagnosis based on available reference standards, and 10% had more than one tissue origin of pain identified. For 27 diagnostic categories and combinations, chance clinical agreement

Microstructural characterization and formation mechanism of 21° top facets of ZnO-based nanowall structures

Energy Technology Data Exchange (ETDEWEB)

Lee, Ju Ho [Reliability Technology Research Institute, Korea Electronics Technology Institute (KETI), 68 Yatap-dong, Bundang-gu, Seongnam 463-816 (Korea, Republic of); Kim, Dong Chan [OLED Research Team 2, Samsung Mobile Display, San 24 Nonseo-dong, Giheung-gu, Yongin 446-711 (Korea, Republic of); Kim, Sang Yun [Department of Materials Science and Engineering, KAIST and Center for Nanomaterials and Chemical Reactions, IBS, 291 Daehak-ro, Yuseong-gu, Daejeon 305-701 (Korea, Republic of); Choi, SungSoon [Reliability Technology Research Institute, Korea Electronics Technology Institute (KETI), 68 Yatap-dong, Bundang-gu, Seongnam 463-816 (Korea, Republic of); Lee, Kwan-Hun [Electronics and Communication Engineering, Kwangwoon University, 447-1 Wolgye-dong, Nowon-gu, Seoul 139-701 (Korea, Republic of); Lee, Jeong Yong, E-mail: j.y.lee@kaist.ac.kr [Department of Materials Science and Engineering, KAIST and Center for Nanomaterials and Chemical Reactions, IBS, 291 Daehak-ro, Yuseong-gu, Daejeon 305-701 (Korea, Republic of); Koun Cho, Hyung, E-mail: chohk@skku.edu [School of Advanced Materials Science and Engineering, Sungkyunkwan University, 300 Cheoncheon-dong, Jangan-gu, Suwon, Gyeonggi-do 440-746 (Korea, Republic of)

2013-03-01

This study reports the microstructural characterization and formation mechanism of the 21° top facets of ZnO-based nanowall structures. The ZnO-based nanowall structures reported previously by many other research groups have {112"¯0} planes as major planes and top facets with a specific angle in common, irrespective of the growth techniques and growth conditions. These nanowalls were found to exist between two adjacent nanowires with a c-axis preferred orientation, and the atoms at the junction of the nanowalls and nanowires perfectly coincided with each other at an atomic level, without any defects. The top facets of the nanowalls showed periodically stepped surfaces and were identified as {011"¯5} planes, which were perpendicular to the {112"¯0} major planes. On the basis of the microstructural characterization of the synthesized ZnO-based nanowall structures, the formation mechanism and atomic structure model of the 21° top facets of the nanowall structures are proposed.

Computational Investigation of the Thermochemistry and Kinetics of Steam Methane Reforming Over a Multi-Faceted Nickel Catalyst

KAUST Repository

Blaylock, D. Wayne; Zhu, Yi-An; Green, William H.

2011-01-01

A microkinetic model of steam methane reforming over a multi-faceted nickel surface using planewave, periodic boundary condition density functional theory is presented. The multi-faceted model consists of a Ni(111) surface, a Ni(100) surface

Differences in Activation Area Within Brodmann Area 2 Caused by Pressure Stimuli on Fingers and Joints

Science.gov (United States)

Choi, Mi-Hyun; Kim, Hyung-Sik; Baek, Ji-Hye; Lee, Jung-Chul; Park, Sung-Jun; Jeong, Ul-Ho; Gim, Seon-Young; Kim, Sung-Phil; Lim, Dae-Woon; Chung, Soon-Cheol

2015-01-01

Abstract In this study, a constant pressure stimulus was applied on the 3 joints (first [p1], second [p2], and third [p3] joints) of 4 fingers (index, middle, ring, and little fingers), and the activation areas within Brodmann area 2 (BA 2) were compared for these different fingers and joints by using functional magnetic resonance imaging. Eight healthy male college students (25.4 ± 1.32 years) participated in the study. Each session was composed of 3 blocks, and each block was composed of a Control phase (30 seconds) and a Pressure phase (30 seconds). No pressure stimulus was applied in the Control phase, during which the subjects would simply lay comfortably with their eyes closed. In the Pressure phase, a pressure stimulus was applied onto one of the joints of the selected finger. For each finger and joint, BA 2 areas activated by the pressure stimulus were extracted by the region of interest method. There was a significant difference in the activation areas for the different fingers (P = .042) as well as for the different joints (P = .050). The activation area decreased in the order of the little, index, and middle fingers, as well as in the order of p1, p3, and p2. PMID:26402840

Evidence-based radiology (part 1): Is there sufficient research to support the use of therapeutic injections for the spine and sacroiliac joints?

Energy Technology Data Exchange (ETDEWEB)

Peterson, Cynthia; Hodler, Juerg [Orthopaedic University Hospital of Balgrist, Radiology, Zuerich (Switzerland)

2010-01-15

This review article addresses the best evidence currently available for therapeutic injection therapy for conditions targeting the spine and sacroiliac joints. The article is presented by spinal region. Controversies and areas of interest for further studies are identified. There is conclusive evidence supporting the effectiveness of the caudal approach for the administration of epidural steroid injections for patients with low back pain from a variety of causes. In general, there is moderate-to-strong evidence supporting the use of transforaminal therapeutic epidural injections for lumbar nerve-root compression and facet injections for joint pain arising from these joints in the cervical, thoracic and lumbar spine, but further subgroup analysis is needed to help predict which specific patients may receive the most benefit from these procedures. No randomized controlled trials, meta-analyses or systematic reviews addressing the effectiveness of therapeutic sacroiliac joint injections have been found. For some injections, corticosteroids may not provide better outcomes compared to local anesthetic injections alone. (orig.)

Modelling of the Human Knee Joint Supported by Active Orthosis

Science.gov (United States)

Musalimov, V.; Monahov, Y.; Tamre, M.; Rõbak, D.; Sivitski, A.; Aryassov, G.; Penkov, I.

2018-02-01

The article discusses motion of a healthy knee joint in the sagittal plane and motion of an injured knee joint supported by an active orthosis. A kinematic scheme of a mechanism for the simulation of a knee joint motion is developed and motion of healthy and injured knee joints are modelled in Matlab. Angles between links, which simulate the femur and tibia are controlled by Simulink block of Model predictive control (MPC). The results of simulation have been compared with several samples of real motion of the human knee joint obtained from motion capture systems. On the basis of these analyses and also of the analysis of the forces in human lower limbs created at motion, an active smart orthosis is developed. The orthosis design was optimized to achieve an energy saving system with sufficient anatomy, necessary reliability, easy exploitation and low cost. With the orthosis it is possible to unload the knee joint, and also partially or fully compensate muscle forces required for the bending of the lower limb.

Modelling of the Human Knee Joint Supported by Active Orthosis

Directory of Open Access Journals (Sweden)

Musalimov V.

2018-02-01

Full Text Available The article discusses motion of a healthy knee joint in the sagittal plane and motion of an injured knee joint supported by an active orthosis. A kinematic scheme of a mechanism for the simulation of a knee joint motion is developed and motion of healthy and injured knee joints are modelled in Matlab. Angles between links, which simulate the femur and tibia are controlled by Simulink block of Model predictive control (MPC. The results of simulation have been compared with several samples of real motion of the human knee joint obtained from motion capture systems. On the basis of these analyses and also of the analysis of the forces in human lower limbs created at motion, an active smart orthosis is developed. The orthosis design was optimized to achieve an energy saving system with sufficient anatomy, necessary reliability, easy exploitation and low cost. With the orthosis it is possible to unload the knee joint, and also partially or fully compensate muscle forces required for the bending of the lower limb.

On the Structure Sensitivity of Direct NO Decomposition over Low-Index Transition Metal Facets

DEFF Research Database (Denmark)

Falsig, Hanne; Shen, Juan; Khan, Tuhin Suvra

2014-01-01

We present a study of the dissociative chemisorption of NO, O2, and N2 over close-packed, stepped, kinked, and open (fcc {111}, {211}, {311}, {532}, {100}, and {110}) transition metal facets using density functional theory (DFT). The offset of the Bronsted-Evans-Polanyi (BEP) relations suggest......} rate. The ordering of the maximum activity over the facets is: {110} > {100} similar to {532} > {311} similar to {211} > {111}, which is in general agreement with the offset in the BEP relations. We show that the top-point location and shape of the volcano relations are approximately independent...... for generally obtaining quantitative agreement between theory and experiments is for the simulations to address in detail the propensities of the various types of active sites. Finally, we show that the ordering of NO decomposition rates among metals and facets is essentially unaltered when using BEP...

Preliminary experience with lumbar facet distraction and fixation as treatment for lumbar spinal stenosis

OpenAIRE

Grasso, Giovanni; Landi, Alessandro

2017-01-01

Objectives: To assess the properties of facet fixation with the Facet Wedge system in patients affected by lumbar spinal stenosis (LSS). Summary of Background Data: Implant of intra-articular spacers is an emerging technique for lumbar degenerative disease. Methods: This study included forty patients (Group 1) with symptomatic LSS in whom intra-articular spacers have been implanted along with microdecompression (MD) of the neural structures. Group 1 has been compared with a homogeneous ...

An Unexplored Facet of International Business in Greece: Foreign and Diaspora Shareholders in Joint Stock Company Start-Ups, 1833-1920

Directory of Open Access Journals (Sweden)

Ioanna Sapfo Pepelasis

2016-07-01

Full Text Available This paper focuses on an unexplored aspect of the history of international business in Greece, the presence of international shareholders in Greek Joint stock company start-ups. Our main findings are that these investors participated in numerous such firms usually as minority shareholders in capital and or knowledge intensive firms. Rarely did they opt for the exclusive international ownership of a joint stock company in Greece and the dividing line  between foreign direct investment and foreign portfolio investment was not always clear. It is also the case that international capital inflow into the nascent corporate sector involved a mosaic of collaborating actors including not only the foreign but also the diasporic.

Clarifying associations between psychopathy facets and personality disorders among offenders

NARCIS (Netherlands)

Klipfel, Kristen M.; Garofalo, C.; Kosson, D.S.

2017-01-01

Purpose This study examined bivariate, unique, and multivariate associations between psychopathy facets and other Personality Disorders (PDs). Method 76 incarcerated males were assessed with clinical interviews measuring psychopathy and DSM-5 PDs. Canonical Correlation Analysis (CCA) was used to

Controlled growth of high-density CdS and CdSe nanorod arrays on selective facets of two-dimensional semiconductor nanoplates

KAUST Repository

Wu, Xue-Jun

2016-03-14

The rational synthesis of hierarchical three-dimensional nanostructures with specific compositions, morphologies and functionalities is important for applications in a variety of fields ranging from energy conversion and electronics to biotechnology. Here, we report a seeded growth approach for the controlled epitaxial growth of three types of hierarchical one-dimensional (1D)/two-dimensional (2D) nanostructures, where nanorod arrays of II-VI semiconductor CdS or CdSe are grown on the selective facets of hexagonal-shaped nanoplates, either on the two basal facets of the nanoplate, or on one basal facet, or on the two basal facets and six side facets. The seed engineering of 2D hexagonal-shaped nanoplates is the key factor for growth of the three resulting types of 1D/2D nanostructures. The wurtzite- and zinc-blende-type polymorphs of semiconductors are used to determine the facet-selective epitaxial growth of 1D nanorod arrays, resulting in the formation of different hierarchical three-dimensional (3D) nanostructures. © 2016 Macmillan Publishers Limited. All rights reserved.

MR imaging of the normal sacroiliac joint with correlation to histology

Energy Technology Data Exchange (ETDEWEB)

Puhakka, K.B.; Jurik, A.G.; Egund, N. [Department of Radiology, Aarhus University Hospital, Aarhus Kommunehospital, 8000, Aarhus (Denmark); Melsen, F. [Institute of Pathology, Aarhus University Hospital, Aarhus Amtssygehus, Aarhus (Denmark); Boel, L.W.; Vesterby, A. [Institute of Forensic Medicine, University of Aarhus, Aarhus (Denmark)

2004-01-01

The microscopic study of the various components of joints provide a proper basis for understanding the nature of pathologic lesions to which they are subject and their imaging appearances. This study was designed to correlate MR imaging with a systematic histological study of the normal sacroiliac joint (SIJ), which to our knowledge is not available in the literature. Five male cadavers, aged 20 to 45 years, and seven male and seven female volunteers, aged 23 to 44 years, were investigated with oblique transaxial and coronal MR imaging of the SIJs. A variety of sequences including pre- and post-contrast T1 fat-saturated studies in the volunteers were used. Cryosectioning was performed in six SIJs of the five cadavers and compared with the MR images for the microscopic joint anatomy and assessed for the presence of abnormalities resembling those associated with sacroiliitis. Throughout the SIJ, the hyaline cartilage of the sacral bone and the proximal third of the hyaline iliac cartilage was strongly attached to the surrounding stabilizing ligaments, forming wide margins of fibrocartilage. In the distal one-third of the joint only, the margins of the iliac joint facet resemble that of a synovial joint, which include an inner capsule with synovial cells. The MR anatomy of the ventral and dorsal aspects of the SIJ was only adequately visualized at oblique transaxial MR imaging. No contrast enhancement occurred in the synovial tissue or in the cartilaginous joint space. The dorsal transition between the proximal 2/3 and distal 1/3 of the cartilaginous joint was at microscopy rich in anatomical and histological variants, including osseous clefts, cartilage and subchondral defects, and vascular connective tissue in the bone marrow. These were all recognized at oblique transaxial MR imaging and in coronal MR sectioning may resemble abnormalities. Otherwise, no erosions, bone marrow abnormalities, bone sclerosis or abnormal contrast enhancement occurred in the normal

Vacuum Bellows, Vacuum Piping, Cryogenic Break, and Copper Joint Failure Rate Estimates for ITER Design Use

Energy Technology Data Exchange (ETDEWEB)

L. C. Cadwallader

2010-06-01

The ITER international project design teams are working to produce an engineering design in preparation for construction of the International Thermonuclear Experimental Reactor (ITER) tokamak. During the course of this work, questions have arisen in regard to safety barriers and equipment reliability as important facets of system design. The vacuum system designers have asked several questions about the reliability of vacuum bellows and vacuum piping. The vessel design team has asked about the reliability of electrical breaks and copper-copper joints used in cryogenic piping. Research into operating experiences of similar equipment has been performed to determine representative failure rates for these components. The following chapters give the research results and the findings for vacuum system bellows, power plant stainless steel piping (amended to represent vacuum system piping), cryogenic system electrical insulating breaks, and copper joints.

Considering the Differential Impact of Three Facets of Organizational Health Climate on Employees' Well-Being.

Science.gov (United States)

Zweber, Zandra M; Henning, Robert A; Magley, Vicki J; Faghri, Pouran

2015-01-01

One potential way that healthy organizations can impact employee health is by promoting a climate for health within the organization. Using a definition of health climate that includes support for health from multiple levels within the organization, this study examines whether all three facets of health climate--the workgroup, supervisor, and organization--work together to contribute to employee well-being. Two samples are used in this study to examine health climate at the individual level and group level in order to provide a clearer picture of the impact of the three health climate facets. k-means cluster analysis was used on each sample to determine groups of individuals based on their levels of the three health climate facets. A discriminant function analysis was then run on each sample to determine if clusters differed on a function of employee well-being variables. Results provide evidence that having strength in all three of the facets is the most beneficial in terms of employee well-being at work. Findings from this study suggest that organizations must consider how health is treated within workgroups, how supervisors support employee health, and what the organization does to support employee health when promoting employee health.

New facets and a branch-and-cut algorithm for the weighted clique problem

DEFF Research Database (Denmark)

Sørensen, Michael Malmros

2004-01-01

four new classes of facet defining inequalities for the associated b-clique polytope. One of these inequality classes constitutes a generalization of the well known tree inequalities; the other classes are associated with multistars. We use these inequalities together with other classes of facet...... defining inequalities in a branch-and-cut algorithm for the problem. We give a description of this algorithm, including some separation procedures, and present the computational results for different sets of test problems. The computation times that are obtained indicate that this algorithm is more...

Triangular facets of slope in the region of Tudela (Ebro Basin, Navarra, Spain)

International Nuclear Information System (INIS)

Marin, C.; Desir, G.; Gutierrez, M.

2009-01-01

Some triangular slope facets are localized to the south of Bardenas Reales (central-west of Ebro Basin), elaborated on Tudela Formation deposits, Aragonian in age. Three of them have been dated by OSL resulting on ages of 35,588±2,488 yr. BP, 35,355±2,446 yr. BP and 40.185±2,411 yr. BP. The origin of these facets is ought to an alternation between accumulation and incision phases produced by vegetation cover variation percentage. Those vegetation cover changes are estimated to be due to climatic changes. (Author) 21 refs.

Broad Bandwidth or High Fidelity? Evidence from the Structure of Genetic and Environmental Effects on the Facets of the Five Factor Model

Science.gov (United States)

Briley, Daniel A.; Tucker-Drob, Elliot M.

2017-01-01

The Five Factor Model (FFM) of personality is well-established at the phenotypic level, but much less is known about the coherence of the genetic and environmental influences within each personality domain. Univariate behavioral genetic analyses have consistently found the influence of additive genes and nonshared environment on multiple personality facets, but the extent to which genetic and environmental influences on specific facets reflect more general influences on higher order factors is less clear. We applied a multivariate quantitative-genetic approach to scores on the CPI-Big Five facets for 490 monozygotic and 317 dizygotic twins who took part in the National Merit Twin Study. Our results revealed a complex genetic structure for facets composing all five factors, with both domain-general and facet-specific genetic and environmental influences. Models that required common genetic and environmental influences on each facet to occur by way of effects on a higher order trait did not fit as well as models allowing for common genetic and environmental effects to act directly on the facets for three of the Big Five domains. These results add to the growing body of literature indicating that important variation in personality occurs at the facet level which may be overshadowed by aggregating to the trait level. Research at the facet level, rather than the factor level, is likely to have pragmatic advantages in future research on the genetics of personality. PMID:22695681

Joint and collaborative representation with local Volterra kernels convolution feature for face recognition

Science.gov (United States)

Feng, Guang; Li, Hengjian; Dong, Jiwen; Chen, Xi; Yang, Huiru

2018-04-01

In this paper, we proposed a joint and collaborative representation with Volterra kernel convolution feature (JCRVK) for face recognition. Firstly, the candidate face images are divided into sub-blocks in the equal size. The blocks are extracted feature using the two-dimensional Voltera kernels discriminant analysis, which can better capture the discrimination information from the different faces. Next, the proposed joint and collaborative representation is employed to optimize and classify the local Volterra kernels features (JCR-VK) individually. JCR-VK is very efficiently for its implementation only depending on matrix multiplication. Finally, recognition is completed by using the majority voting principle. Extensive experiments on the Extended Yale B and AR face databases are conducted, and the results show that the proposed approach can outperform other recently presented similar dictionary algorithms on recognition accuracy.

Imaging by atomic force microscopy of the properties difference of the layers covering the facets created during SIMS analysis

Energy Technology Data Exchange (ETDEWEB)

Fares, B., E-mail: boubker.fares@hotmail.fr [Université Mohammed V-Agdal, Faculté des Sciences, LPM, B.P. 1014 Rabat (Morocco); Gautier, B.; Albertini, D. [Institut des Nanotechnologies de Lyon, UMR CNRS 5511, Université de Lyon, 7 Avenue Capelle, 69621 Villeurbanne (France); Mzerd, A.; Loghmarti, M. [Université Mohammed V-Agdal, Faculté des Sciences, LPM, B.P. 1014 Rabat (Morocco)

2014-07-01

Atomic force microscopy (AFM) is used in tapping mode in order to study the roughness created in the crater bottom during secondary ions mass spectrometry (SIMS) analysis in silicon, using O{sub 2}{sup +} primary ions without flooding. Previous studies of the chemical composition of the facets created during the analysis have lead to the conclusion that the facets oriented toward the O{sub 2}{sup +} beam during the ionic bombardment were close to SiO{sub 2} in composition, while the facets hidden from the beam were covered with a sub-stoichiometric oxide SiO{sub x} (with x < 2). We show that the AFM phase contrast during tapping mode observation of the facets reflects this composition difference, revealing a sharp contrast between the facets. The observed contrast may arise from the different chemical composition of the facets, leading to a different energy dissipation of the tip/sample system over Si and SiO{sub 2} due to the different properties of the materials (hardness, adhesion, etc.). As a comparison, an observation of a surface covered with SiO{sub 2} and Si (SiO{sub 2} deposed with a 90 nm or 4 nm thickness, and partially removed from a Si surface) shows the same kind of contrast.

Mindfulness facets and problematic Internet use: A six-month longitudinal study.

Science.gov (United States)

Calvete, Esther; Gámez-Guadix, Manuel; Cortazar, Nerea

2017-09-01

The aim of this study was to study the cross-sectional and longitudinal associations between mindfulness facets and problematic Internet use in adolescents. The sample consisted of 609 adolescents (313 girls, 296 boys; Mean age=14.21years, SD=1.71; age range 11-18). Participants completed a measure of five facets of mindfulness (describing, observing, acting with awareness, non-judging and non-reacting) at the beginning of the year, and measures of several components of problematic Internet use (preference for online social interactions, the use of the Internet to regulate mood, deficient self-regulation and negative outcomes) at beginning of the year and six months later. Findings indicated that non-judging is the only dimension of mindfulness that predicts a decrease in preference for online social interactions over face-to-face relationships. Moreover, non-judging indirectly predicted reductions in the rest of the problematic Internet use components. The observing and acting with awareness dimensions of mindfulness directly predicted less deficient self-regulation of Internet use and indirectly predicted less negative outcomes through their impact on deficient self-regulation. Thus, these dimensions seem to act when the maladaptive use of the Internet is consolidated. These findings suggest that interventions should include approaches to develop those mindfulness facets that protect against the development of problematic Internet use. Copyright © 2017 Elsevier Ltd. All rights reserved.

Multicarrier Block-Spread CDMA for Broadband Cellular Downlink

Directory of Open Access Journals (Sweden)

Leus Geert

2004-01-01

Full Text Available Effective suppression of multiuser interference (MUI and mitigation of frequency-selective fading effects within the complexity constraints of the mobile constitute major challenges for broadband cellular downlink transceiver design. Existing wideband direct-sequence (DS code division multiple access (CDMA transceivers suppress MUI statistically by restoring the orthogonality among users at the receiver. However, they call for receive diversity and multichannel equalization to improve the fading effects caused by deep channel fades. Relying on redundant block spreading and linear precoding, we design a so-called multicarrier block-spread- (MCBS-CDMA transceiver that preserves the orthogonality among users and guarantees symbol detection, regardless of the underlying frequency-selective fading channels. These properties allow for deterministic MUI elimination through low-complexity block despreading and enable full diversity gains, irrespective of the system load. Different options to perform equalization and decoding, either jointly or separately, strike the trade-off between performance and complexity. To improve the performance over multi-input multi-output (MIMO multipath fading channels, our MCBS-CDMA transceiver combines well with space-time block-coding (STBC techniques, to exploit both multiantenna and multipath diversity gains, irrespective of the system load. Simulation results demonstrate the superior performance of MCBS-CDMA compared to competing alternatives.

Probabilistic Decision Based Block Partitioning for Future Video Coding

KAUST Repository

Wang, Zhao

2017-11-29

In the latest Joint Video Exploration Team development, the quadtree plus binary tree (QTBT) block partitioning structure has been proposed for future video coding. Compared to the traditional quadtree structure of High Efficiency Video Coding (HEVC) standard, QTBT provides more flexible patterns for splitting the blocks, which results in dramatically increased combinations of block partitions and high computational complexity. In view of this, a confidence interval based early termination (CIET) scheme is proposed for QTBT to identify the unnecessary partition modes in the sense of rate-distortion (RD) optimization. In particular, a RD model is established to predict the RD cost of each partition pattern without the full encoding process. Subsequently, the mode decision problem is casted into a probabilistic framework to select the final partition based on the confidence interval decision strategy. Experimental results show that the proposed CIET algorithm can speed up QTBT block partitioning structure by reducing 54.7% encoding time with only 1.12% increase in terms of bit rate. Moreover, the proposed scheme performs consistently well for the high resolution sequences, of which the video coding efficiency is crucial in real applications.

Moisture transport properties of mortar and mortar joint: A NMR study

NARCIS (Netherlands)

Brocken, H.J.P.; Adant, O.C.G.; Pel, L.

1997-01-01

The moisture transport in mortar and mortar joint often is an important parameter in degeneration of brick masonry and other block constructions. In this study, the influence of single additives on the moisture transport properties of mortar is investigated. Due to water extraction during brick

Moisture transport properties of mortar and mortar joint: a NMR study

NARCIS (Netherlands)

Brocken, H.J.P.; Adan, O.C.G.; Pel, L.

1997-01-01

The moisture transport in mortar and mortar joint often is an important parameter in degeneration of brick masonry and other block constructions. In this study, the influence of single additives on the moisture transport properties of mortar is investigated. Due to water extraction during brick

Beyond Conflict: Functional Facets of the Work-Family Interplay

Science.gov (United States)

Wiese, Bettina S.; Seiger, Christine P.; Schmid, Christian M.; Freund, Alexandra M.

2010-01-01

The present paper deals with three positive facets of the work-family interplay, i.e., transfer of competencies, transfer of positive mood, and cross-domain compensation. The latter refers to the experience that engagement in one domain helps dealing with failures in the other domain. In two correlational studies (N[subscript 1] = 107 working…

Three-Dimensional Hetero-Integration of Faceted GaN on Si Pillars for Efficient Light Energy Conversion Devices.

Science.gov (United States)

Kim, Dong Rip; Lee, Chi Hwan; Cho, In Sun; Jang, Hanmin; Jeon, Min Soo; Zheng, Xiaolin

2017-07-25

An important pathway for cost-effective light energy conversion devices, such as solar cells and light emitting diodes, is to integrate III-V (e.g., GaN) materials on Si substrates. Such integration first necessitates growth of high crystalline III-V materials on Si, which has been the focus of many studies. However, the integration also requires that the final III-V/Si structure has a high light energy conversion efficiency. To accomplish these twin goals, we use single-crystalline microsized Si pillars as a seed layer to first grow faceted Si structures, which are then used for the heteroepitaxial growth of faceted GaN films. These faceted GaN films on Si have high crystallinity, and their threading dislocation density is similar to that of GaN grown on sapphire. In addition, the final faceted GaN/Si structure has great light absorption and extraction characteristics, leading to improved performance for GaN-on-Si light energy conversion devices.

Enhancing the photoresponse and photocatalytic properties of TiO2 by controllably tuning defects across {101} facets

Science.gov (United States)

Wan, Piaopiao; Hood, Zachary D.; Adhikari, Shiba P.; Xu, Yunfan; Yang, Shize; Wu, Sujuan

2018-03-01

Introducing defects into semiconductors with well-controlled exposed facets offers an effective route for the development of photocatalytic materials with greatly improved properties. Here, we report a facile ethylene glycol reduction procedure to make anatase titanium dioxide (TiO2) with different concentrations of exposed {001} and {101} facets, leading to different surficial defects. TiO2 with increased concentrations of {101} facets shows a 5-fold improvement in photocurrent generation as well as improved photocatalytic activity towards water splitting under visible light irradiation. The improved activity is ascribed to the oxygen vacancies as well as the variable surface chemical states, which collectively induce a slower recombination rate of photo-induced electron-hole pairs. This work also highlights a feasible strategy to obtain the defective TiO2 and explore the synergistic effect of surface defects and different concentrations of exposed {001} and {101} facets for photocurrent and photocatalytic properties under visible light irradiation.

The hematoma block: a simple, effective technique for closed reduction of ankle fracture dislocations.

Science.gov (United States)

Ross, Adrianne; Catanzariti, Alan R; Mendicino, Robert W

2011-01-01

Management of a dislocated ankle fracture can be challenging because of instability of the ankle mortise, a compromised soft tissue envelope, and the potential neurovascular compromise. Every effort should be made to quickly and efficiently relocate the disrupted ankle joint. Within the emergency department setting, narcotics and benzodiazepines can be used to sedate the patient before attempting closed reduction. The combination of narcotics and benzodiazepines provides relief of pain and muscle guarding; however, it conveys a risk of seizure as well as respiratory arrest. An alternative to conscious sedation is the hematoma block, or an intra-articular local anesthetic injection in the ankle joint and the associated fracture hematoma. The hematoma block offers a comparable amount of analgesia to conscious sedation without the additional cardiovascular risk, hospital cost, and procedure time. Copyright © 2011 American College of Foot and Ankle Surgeons. Published by Elsevier Inc. All rights reserved.

Solvothermal synthesis of TiO2 nanocrystals with {001} facets using titanic acid nanobelts for superior photocatalytic activity

Science.gov (United States)

Cao, Yuhui; Zong, Lanlan; Li, Qiuye; Li, Chen; Li, Junli; Yang, Jianjun

2017-01-01

Anatase TiO2 nanocrystals exposed with {001} facets were fabricated by solvothermal strategy in HF-C4H9OH mixed solution, using titanic acid nanobelts (TAN) as a precursor. The shape of TAN is a long flat plane with a high aspect ratio, and F- is easily adsorbed on the surface of the nanobelts, inducing a higher exposure of {001} facet of TiO2 nanoparticles during the structure reorganization. The exposed percentage of {001} facets could vary from 40 to 77% by adjusting the amount of HF. The as-prepared samples were characterized by transmission electron microscopy, N2 adsorption-desorption isotherms, X-ray diffraction, Raman spectroscopy, and X-ray photoelectron spectroscope. The photocatalytic measurement showed that TiO2 nanocrystals with 77% {001} facets exhibited much superior photocatalytic activity for photodegradation of methyl orange, methylene blue, and rhodamine B. And what's more, the mineralization rate of methyl orange was as high as 96% within 60 min. The photocatalytic enhancement is due to a large amount of the high energetic {001} facets exposing, the special truncated octahedral morphology and a stronger ability for dyes adsorption.

(100) faceted anion voids in electron irradiated fluorite

International Nuclear Information System (INIS)

Johnson, E.

1979-01-01

High fluence electron irradiation of fluorite crystals in the temperature range 150 to 320 K results in formation of a simple cubic anion void superlattice. Above 320 K the damage structure changes to a random distribution of large [001] faceted anion voids. This voidage behaviour, similar to that observed in a range of irradiated metals, is discussed in terms points defect rather than conventional colour centre terminology. (Auth.)

Restoration and Preservation of Engraved Limestone Blocks Discovered in Abu Mousa Excavation, Suez - Egypt

Directory of Open Access Journals (Sweden)

Nabil A. Abd El-Tawab BADER

2013-03-01

Full Text Available A lot of engraved limestone blocks were discovered at Awlad Abu Musa (east of Suez, Egypt in 1995/2007 by Supreme Council of Antiquities. The stone blocks were seriously affected by archaeological environments during burial environment in agriculture land. They were covered with thick clay layer with soil particles that disfigured them and hid their inscriptions. Prior to the conservation intervention, the materials were characterized by X-ray diffraction, optical microscopy, scanning electron microscopy with energy-dispersive X-ray spectroscopy, Chemical analyses of ground water and microbiological study. After the material characterization, the conservation and restoration of the stone blocks were carried out including cleaning, consolidation, reduction of salts, Re-jointing, restoration and completion of lost parts. After that the blocks were exhibited in Suez museum.

Cross-cultural evidence for the two-facet structure of pride

NARCIS (Netherlands)

Shi, Y.; Chung, J.M.H.; Cheng, J.T.; Tracy, J.L.; Robins, R.W.; Chen, X.; Zheng, Y.

2015-01-01

Across six studies conducted in Mainland China and South Korea, the present research extended prior findings showing that pride is comprised of two distinct conceptual and experiential facets in the U.S.: a pro-social, achievement-oriented “authentic pride”, and an arrogant, self-aggrandizing

Which facets of mindfulness are related to problematic eating among patients seeking bariatric surgery?

Science.gov (United States)

Levin, Michael E; Dalrymple, Kristy; Himes, Susan; Zimmerman, Mark

2014-04-01

There has been growing research indicating the potential positive benefits of mindfulness-based interventions for obesity, but few studies have examined the relationship of mindfulness processes to obesity-related behaviors, particularly among clinical populations such as bariatric surgery candidates. The current study examined the relationship of specific mindfulness facets to a variety of problematic eating behaviors assessed through diagnostic interviews in a clinical sample of 820 patients seeking bariatric surgery. Results indicated that greater mindfulness on specific facets, particularly acting with awareness, was related to less binge and emotional eating. Greater mindfulness was also related, though less consistently, to less habitual overeating and grazing. The observing facet was generally unrelated to problematic eating, but in a few cases being more observant related to having greater eating problems. The results of the study and future directions are discussed in relation to research on problematic eating in obesity and mindfulness-based interventions. Copyright © 2014 Elsevier Ltd. All rights reserved.

New Facets and a Branch-and-Cut Algorithm for the Weighted Clique Problem

DEFF Research Database (Denmark)

Sørensen, Michael Malmros

2001-01-01

of facet defining inequalities in a branch-and-cut algorithm for the problem. We give a description of this algorithm, including some separation procedures, and present the computational results for different sets of test problems. The computation times that are obtained indicate that this algorithm...... four new classes of facet defining inequalities for the associated b-clique polytope. One of these inequality classes constitutes a generalization of the well known tree inequalities; the other classes are associated with multistars. We utilize these inequality classes together with other classes...... is more efficient than previously described algorithms for the problem....

Fiber optic Ethernet transceiver for Joint STARS block I GSM

Science.gov (United States)

Gatens, Dennis R.; Usberghi, Michael J.

The authors discuss the use of FiberCom's DPT dual redundant counter-rotating ring Ethernet transceiver, and its use as an integral part of the Joint STARS (Surveillance Target Attack Radar System) surface-to-air battlefield information station called the ground station module (GSM). The Ethernet transceiver uses a dual counter-rotating fiber ring architecture. The operation of the unit enables the network to have fault-tolerant capability with no single point of failure. This results from the unit's ability to reconfigure around a network failure, creating a new working segment from the remaining portion. The medium attachment unit interface conforms to ANSI/IEEE Std. 802.3-1985, the IEEE Standard for Local Area Networks-Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications.

Considering the Differential Impact of Three Facets of Organizational Health Climate on Employees' Well-Being

Science.gov (United States)

Zweber, Zandra M.; Henning, Robert A.; Magley, Vicki J.; Faghri, Pouran

2015-01-01

One potential way that healthy organizations can impact employee health is by promoting a climate for health within the organization. Using a definition of health climate that includes support for health from multiple levels within the organization, this study examines whether all three facets of health climate—the workgroup, supervisor, and organization—work together to contribute to employee well-being. Two samples are used in this study to examine health climate at the individual level and group level in order to provide a clearer picture of the impact of the three health climate facets. k-means cluster analysis was used on each sample to determine groups of individuals based on their levels of the three health climate facets. A discriminant function analysis was then run on each sample to determine if clusters differed on a function of employee well-being variables. Results provide evidence that having strength in all three of the facets is the most beneficial in terms of employee well-being at work. Findings from this study suggest that organizations must consider how health is treated within workgroups, how supervisors support employee health, and what the organization does to support employee health when promoting employee health. PMID:26380360

Considering the Differential Impact of Three Facets of Organizational Health Climate on Employees’ Well-Being

Directory of Open Access Journals (Sweden)

Zandra M. Zweber

2015-01-01

Full Text Available One potential way that healthy organizations can impact employee health is by promoting a climate for health within the organization. Using a definition of health climate that includes support for health from multiple levels within the organization, this study examines whether all three facets of health climate—the workgroup, supervisor, and organization—work together to contribute to employee well-being. Two samples are used in this study to examine health climate at the individual level and group level in order to provide a clearer picture of the impact of the three health climate facets. k-means cluster analysis was used on each sample to determine groups of individuals based on their levels of the three health climate facets. A discriminant function analysis was then run on each sample to determine if clusters differed on a function of employee well-being variables. Results provide evidence that having strength in all three of the facets is the most beneficial in terms of employee well-being at work. Findings from this study suggest that organizations must consider how health is treated within workgroups, how supervisors support employee health, and what the organization does to support employee health when promoting employee health.

Facet-specific interaction between methanol and TiO2 probed by sum-frequency vibrational spectroscopy.

Science.gov (United States)

Yang, Deheng; Li, Yadong; Liu, Xinyi; Cao, Yue; Gao, Yi; Shen, Y Ron; Liu, Wei-Tao

2018-04-24

The facet-specific interaction between molecules and crystalline catalysts, such as titanium dioxides (TiO 2 ), has attracted much attention due to possible facet-dependent reactivity. Using surface-sensitive sum-frequency vibrational spectroscopy, we have studied how methanol interacts with different common facets of crystalline TiO 2 , including rutile(110), (001), (100), and anatase(101), under ambient temperature and pressure. We found that methanol adsorbs predominantly in the molecular form on all of the four surfaces, while spontaneous dissociation into methoxy occurs preferentially when these surfaces become defective. Extraction of Fermi resonance coupling between stretch and bending modes of the methyl group in analyzing adsorbed methanol spectra allows determination of the methanol adsorption isotherm. The isotherms obtained for the four surfaces are nearly the same, yielding two adsorbed Gibbs free energies associated with two different adsorption configurations singled out by ab initio calculations. They are ( i ) ∼-20 kJ/mol for methanol with its oxygen attached to a low-coordinated surface titanium, and ( ii ) ∼-5 kJ/mol for methanol hydrogen-bonded to a surface oxygen and a neighboring methanol molecule. Despite similar adsorption energetics, the Fermi resonance coupling strength for adsorbed methanol appears to depend sensitively on the surface facet and coverage.

An Examination of Pay Facets and Referent Groups for Assessing Pay Satisfaction of Male Elementary School Principals

Science.gov (United States)

Young, I. Phillip; Young, Karen Holsey; Okhremtchouk, Irina; Castaneda, Jose Moreno

2009-01-01

Pay satisfaction was assessed according to different facets (pay level, benefits, pay structure, and pay raises) and potential referent groups (teachers and elementary school principals) for a random sample of male elementary school principals. A structural model approach was used that considers facets of the pay process, potential others as…

Effects of Interlocking and Supporting Conditions on Concrete Block Pavements

Science.gov (United States)

Mahapatra, Geetimukta; Kalita, Kuldeep

2018-02-01

Concrete Block Paving (CBP) is widely used as wearing course in flexible pavements, preferably under light and medium vehicular loadings. Construction of CBP at site is quick and easy in quality control. Usually, flexible pavement design philosophy is followed in CBP construction, though it is structurally different in terms of small block elements with high strength concrete and their interlocking aspects, frequent joints and discontinuity, restrained edge etc. Analytical solution for such group action of concrete blocks under loading in a three dimensional multilayer structure is complex and thus, the need of conducting experimental studies is necessitated for extensive understanding of the load—deformation characteristics and behavior of concrete blocks in pavement. The present paper focuses on the experimental studies for load transfer characteristics of CBP under different interlocking and supporting conditions. It is observed that both interlocking and supporting conditions affect significantly on the load transfer behavior in CBP structures. Coro-lock block exhibits better performance in terms of load carrying capacity and distortion behavior under static loads. Plate load tests are performed over subgrade, granular sub-base (GSB), CBP with and without GSB using different block shapes. For an example case, the comparison of CBP with conventional flexible pavement section is also presented and it is found that CBP provides considerable benefit in terms of construction cost of the road structure.

The Cool and Belkin Faceted Classification of Information Interactions Revisited

Science.gov (United States)

Huvila, Isto

2010-01-01

Introduction: The complexity of human information activity is a challenge for both practice and research in information sciences and information management. Literature presents a wealth of approaches to analytically structure and make sense of human information activity including a faceted classification model of information interactions published…

Anatase TiO2 single crystals with dominant {0 0 1} facets: Synthesis, shape-control mechanism and photocatalytic activity

Science.gov (United States)

Tong, Huifen; Zhou, Yingying; Chang, Gang; Li, Pai; Zhu, Ruizhi; He, Yunbin

2018-06-01

Anatase TiO2 micro-crystals with 51% surface exposing highly active {0 0 1} facets are prepared by hydrothermal synthesis using TiF4 as Ti resource and HF as morphology control agent. In addition, anatase TiO2 single crystals exposing large {0 0 1} crystal facets are facilely synthesized with "green" NaF plus HCl replacing HF for the morphology control. A series of comparative experiments are carried out for separately studying the effects of F- and H+ concentrations on the growth of TiO2 crystals, which have not been understood very much in depth so far. The results indicate that both F- and H+ synergistically affect the synthesis of truncated anatase octahedrons, where F- is preferentially adsorbed on the {0 0 1} facets resulting in lateral growth of these facets and H+ adjusts the growth rate of anatase TiO2 along different orientations by tuning the hydrolysis rate. Based on this information, anatase TiO2 single crystals with small size (1.3 μm) and large exposure of {0 0 1} facets (45%) are successfully prepared under optimal conditions ([H+]/[F-] = 20:1). Photocatalytic activities of the as-prepared products toward methylene blue photo-degradation are further tested. It is revealed that both crystal size and percentage of {0 0 1} facets are decisive for the photocatalytic performance, and the crystals with a small size (1.3 μm) and large exposure of {0 0 1} facets (45%) are catalytically most active. This work has clarified the main factors that control the growth process and morphology of anatase TiO2 single crystals for achieving superior photocatalytic properties.

Photocatalytic selective oxidation of phenol in suspensions of titanium dioxide with exposed {0 0 1} facets

International Nuclear Information System (INIS)

Ye, Hengpeng; Lu, Shaoming

2013-01-01

Anatase TiO 2 nanocrystals with exposed {0 0 1} facets were tailored by hydrothermal treatment of Ti(OC 4 H 9 ) 4 –HF–H 2 O mixed solution. The photocatalysts were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), nitrogen adsorption–desorption isotherms and X-ray photoelectron spectroscopy (XPS). The effect of structure of the photocatalyst on the photocatalytic selective oxidation of phenol under UV irradiation was studied. The experiment results showed that (1) the percentage of the exposed {0 0 1} facets of the nanocrystal increases with increasing the nominal atomic ratio of fluorine to titanium (R F ), (2) catechol and hydroquinone are main intermediates detected during photocatalytic oxidation of phenol, and (3) both photocatalytic oxidation of phenol and selectivity (yield) of catechol are positively correlated with the percentage of exposed {0 0 1} facets of the high-energy TiO 2 nanocrystals. The enhanced conversion of phenol and selectivity (yield) of catechol were ascribed to the synergistic effects of the exposed high-energy {0 0 1} facets and surface fluorination. This study may provide new insight into the selective oxidation of organics.

Different facets of market orientation

DEFF Research Database (Denmark)

Ormrod, Robert P.; Henneberg, Stephan C.

2009-01-01

the UK parties generally exhibited similar levels of market orientation on each of the relevant construct dimensions, the German parties had more distinct profiles; thus the applied dimensions of political market orientation show discriminatory power within and across electoral systems. In the UK......In this study we employ the concept of political market orientation to better understand how the main political parties in the UK and Germany relate to other stakeholders in the political sphere through an exploratory content analysis of their core election offering, the manifesto. This study has...... two aims: firstly, we will discuss the different facets of the market orientation of the main UK and German parties in their respective 2005 General Elections through an exploratory content analysis, and secondly, we will compare characteristics of market orientation between the two countries. Whilst...

Innovative Facet Passivation for High-Brightness Laser Diodes

Science.gov (United States)

2016-02-05

processing will prevent oxidation of the front facet, the leading contaminant from the ambient. By keeping the MBE growth temperatures between 400 and 500 ...suitably adjusted Al mole fraction and growth recipes . Specifically, MBE-AlGaAs passivation can apply to slab pumped lasers (e.g. 808 nm), fiber...li ty OHMIC CONTACTS PASSIVATION LAYER 400 OC 500 OC THERMAL “ SWEET SPOT ” POLYCRYTALLINE / LATTICE MIS-MATCHED PASSIVATION OHMIC CONTACT DEGRADATION

The Application of Normal Stress Reduction Function in Tilt Tests for Different Block Shapes

Science.gov (United States)

Kim, Dong Hyun; Gratchev, Ivan; Hein, Maw; Balasubramaniam, Arumugam

2016-08-01

This paper focuses on the influence of the shapes of rock cores, which control the sliding or toppling behaviours in tilt tests for the estimation of rock joint roughness coefficients (JRC). When the JRC values are estimated by performing tilt tests, the values are directly proportional to the basic friction of the rock material and the applied normal stress on the sliding planes. Normal stress obviously varies with the shape of the sliding block, and the basic friction angle is also affected by the sample shapes in tilt tests. In this study, the shapes of core blocks are classified into three representative shapes and those are created using plaster. Using the various shaped artificial cores, a set of tilt tests is carried out to identify the shape influences on the normal stress and the basic friction angle in tilt tests. The test results propose a normal stress reduction function to estimate the normal stress for tilt tests according to the sample shapes based on Barton's empirical equation. The proposed normal stress reduction functions are verified by tilt tests using artificial plaster joints and real rock joint sets. The plaster joint sets are well matched and cast in detailed printed moulds using a 3D printing technique. With the application of the functions, the obtained JRC values from the tilt tests using the plaster samples and the natural rock samples are distributed within a reasonable JRC range when compared with the measured values.

Study of copper pre-oxydation structures by electron diffraction at high energy in relation with (410) and (530) facet formation

International Nuclear Information System (INIS)

Ponslet, A.; Legrand-Bonnyns, E.

1975-01-01

When a copper sample heated at 900 deg C in presence of 10 -6 torr oxygen for a couple of hours is cooled the surface between the (111) or (100) facets breaks up into a very fine structure consisting of facets having their pole almost in coincidence either with a (410) or (530) pole of copper crystal. This occurs at a critical temperature T(c) laying between 620 deg C and 700 deg C depending on type of facets and on surface orientation. The facets will disappear from the surface almost instantaneously by elevating the temperature of the crystal by 25 deg C and they will reappear by cooling down again to T(c) in a very reproducible way: when the copper crystal is cooled oxygen in excess in the bulk will segregate at the surface giving rise to the adsorption structures. The modification of the surface topography was studied by microscopy. The optical microscope and the diffraction apparatus are mounted on the vacuum vessel. The orientation of the facets and their size have been studied by electron microscopy. The crystal surface breaks up into (410) or (530) facets when a bidimensional stable Cu(x)O(y) structure has been formed on the surface was established [fr

A numerically accurate and robust expression for bistatic scattering from a plane triangular facet

DEFF Research Database (Denmark)

Wendelboe, Gorm; Jacobsen, Finn; Bell, Judith

2006-01-01

This work is related to modeling of synthetic sonar images of naval mines or other objects. Considered here is the computation of high frequency scattering from the surface of a rigid 3D-object numerically represented by plane triangular facets. The far field scattered pressure from each facet...... area was applied instead. The effective ensonified area solution is exact at normal incidence, but at other angles, where singularities also exist, the scattered pressure will be incorrect. This paper presents a frequency domain expression generalized to bistatic scattering written in terms of sinc...

Facets of the Fundamental Content Dimensions: Agency with Competence and Assertiveness—Communion with Warmth and Morality

Science.gov (United States)

Abele, Andrea E.; Hauke, Nicole; Peters, Kim; Louvet, Eva; Szymkow, Aleksandra; Duan, Yanping

2016-01-01

Agency (A) and communion (C) are fundamental content dimensions. We propose a facet-model that differentiates A into assertiveness (AA) and competence (AC) and C into warmth (CW) and morality (CM). We tested the model in a cross-cultural study by comparing data from Asia, Australia, Europe, and the USA (overall N = 1.808). Exploratory and confirmatory factor analyses supported our model. Both the two-factor model and the four-factor model showed good fit indices across countries. Participants answered additional measures intended to demonstrate the fruitfulness of distinguishing the facets. The findings support the model's construct validity by positioning the fundamental dimensions and their facets within a network of self-construal, values, impression management, and the Big Five personality factors: In all countries, A was related to independent self-construal and to agentic values, C was related to interdependent self-construal and to communal values. Regarding the facets, AA was always related to A values, but the association of AC with A values fell below our effect size criterion in four of the five countries. A (both AA and AC) was related to agentic impression management. However, C (both CW and CM) was neither related to communal nor to agentic impression management. Regarding the Big Five personality factors, A was related to emotional stability, to extraversion, and to conscientiousness. C was related to agreeableness and to extraversion. AA was more strongly related to emotional stability and extraversion than AC. CW was more strongly related to extraversion and agreeableness than CM. We could also show that self-esteem was more related to AA than AC; and that it was related to CM, but not to CW. Our research shows that (a) the fundamental dimensions of A and C are stable across cultures; and (b) that the here proposed distinction of facets of A and C is fruitful in analyzing self-perception. The here proposed measure, the AC-IN, may be a useful tool

Facets of the Fundamental Content Dimensions: Agency with Competence and Assertiveness-Communion with Warmth and Morality.

Science.gov (United States)

Abele, Andrea E; Hauke, Nicole; Peters, Kim; Louvet, Eva; Szymkow, Aleksandra; Duan, Yanping

2016-01-01

Agency (A) and communion (C) are fundamental content dimensions. We propose a facet-model that differentiates A into assertiveness (AA) and competence (AC) and C into warmth (CW) and morality (CM). We tested the model in a cross-cultural study by comparing data from Asia, Australia, Europe, and the USA (overall N = 1.808). Exploratory and confirmatory factor analyses supported our model. Both the two-factor model and the four-factor model showed good fit indices across countries. Participants answered additional measures intended to demonstrate the fruitfulness of distinguishing the facets. The findings support the model's construct validity by positioning the fundamental dimensions and their facets within a network of self-construal, values, impression management, and the Big Five personality factors: In all countries, A was related to independent self-construal and to agentic values, C was related to interdependent self-construal and to communal values. Regarding the facets, AA was always related to A values, but the association of AC with A values fell below our effect size criterion in four of the five countries. A (both AA and AC) was related to agentic impression management. However, C (both CW and CM) was neither related to communal nor to agentic impression management. Regarding the Big Five personality factors, A was related to emotional stability, to extraversion, and to conscientiousness. C was related to agreeableness and to extraversion. AA was more strongly related to emotional stability and extraversion than AC. CW was more strongly related to extraversion and agreeableness than CM. We could also show that self-esteem was more related to AA than AC; and that it was related to CM, but not to CW. Our research shows that (a) the fundamental dimensions of A and C are stable across cultures; and (b) that the here proposed distinction of facets of A and C is fruitful in analyzing self-perception. The here proposed measure, the AC-IN, may be a useful tool

Facets of the Fundamental Content Dimensions:Agency with Competence and Assertiveness– Communion with Warmth and Morality.

Directory of Open Access Journals (Sweden)

Andrea Elisabeth Abele

2016-11-01

Full Text Available Agency (A and communion (C are fundamental content dimensions. We propose a facet-model that differentiates A into assertiveness (AA and competence (AC and C into warmth (CW and morality (CM. We tested the model in a cross-cultural study by comparing data from Asia, Australia, Europe, and the USA (overall N = 1.808. Exploratory and confirmatory factor analyses supported our model. Both the two-factor model and the four-factor model showed good fit indices across countries. Participants answered additional measures intended to demonstrate the fruitfulness of distinguishing the facets. The findings support the model’s construct validity by positioning the fundamental dimensions and their facets within a network of self-construal, values, impression management, and the Big Five personality factors: In all countries, A was related to independent self-construal and to agentic values, C was related to interdependent self-construal and to communal values. Regarding the facets, AA was always related to A values, but the association of AC with A values fell below our effect size criterion in four of the five countries. A (both AA and AC was related to agentic impression management. However, C (both CW and CM was neither related to communal nor to agentic impression management. Regarding the Big Five personality factors, A was related to emotional stability, to extraversion, and to conscientiousness. C was related to agreeableness and to extraversion. AA was more strongly related to emotional stability and extraversion than AC. CW was more strongly related to extraversion and agreeableness than CM. We could also show that self-esteem was more related to AA than AC; and that it was related to CM, but not to CW. Our research shows that (a the fundamental dimensions of A and C are stable across cultures; and (b that the here proposed distinction of facets of A and C is fruitful in analyzing self-perception. The here proposed measure, the AC-IN, may be a

The Faceted Discrete Growth and Phase Differentiation During the Directional Solidification of 20SiMnMo5 Steel

Science.gov (United States)

Ma, Xiaoping; Li, Dianzhong

2018-07-01

The microstructures, segregation and cooling curve were investigated in the directional solidification of 20SiMnMo5 steel. The typical characteristic of faceted growth is identified. The microstructures within the single cellular and within the single dendritic arm, together with the contradictive segregation distribution against the cooling curve, verify the discrete crystal growth in multi-scales. Not only the single cellular/dendritic arm but also the single martensite zone within the single cellular/dendritic arm is produced by the discrete growth. In the viewpoint of segregation, the basic domain following continuous growth has not been revealed. Along with the multi-scale faceted discrete growth, the phase differentiation happens for both the solid and liquid. The differentiated liquid phases appear and evolve with different sizes, positions, compositions and durations. The physical mechanism for the faceted discrete growth is qualitatively established based on the nucleation of new faceted steps induced by the composition gradient and temperature gradient.