WorldWideScience

Sample records for face equipment approved

  1. 46 CFR 154.1005 - Equipment approval.

    Science.gov (United States)

    2010-10-01

    ... carried. (b) Each submerged cargo pump motor installation must be specially approved by the Commandant (CG... FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES Design, Construction and Equipment Electrical § 154.1005 Equipment approval. (a) Electrical equipment that is required to be intrinsically safe...

  2. 30 CFR 18.22 - Boring-type machines equipped for auxiliary face ventilation.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Boring-type machines equipped for auxiliary... AND ACCESSORIES Construction and Design Requirements § 18.22 Boring-type machines equipped for auxiliary face ventilation. Each boring-type continuous-mining machine that is submitted for approval...

  3. 30 CFR 18.81 - Field modification of approved (permissible) equipment; application for approval of modification...

    Science.gov (United States)

    2010-07-01

    ... TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS ELECTRIC MOTOR-DRIVEN MINE EQUIPMENT AND ACCESSORIES Machines Assembled With Certified or Explosion-Proof Components, Field Modifications of Approved Machines... and Certification Center, 765 Technology Drive, Triadelphia, WV 26059. (b) Proposed...

  4. 30 CFR 75.503 - Permissible electric face equipment; maintenance.

    Science.gov (United States)

    2010-07-01

    ...-General § 75.503 Permissible electric face equipment; maintenance. The operator of each coal mine shall... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Permissible electric face equipment; maintenance. 75.503 Section 75.503 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT...

  5. 30 CFR 18.91 - Electric equipment for which field approvals will be issued.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Electric equipment for which field approvals... OF LABOR TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS ELECTRIC MOTOR-DRIVEN MINE EQUIPMENT AND ACCESSORIES Field Approval of Electrically Operated Mining Equipment § 18.91 Electric equipment...

  6. Down time analysis of longwall face equipment - a case study

    Energy Technology Data Exchange (ETDEWEB)

    Kundu, M.; Ral, P.; Nath, R. [Banaras Hindu University, Varanasi (India). Inst. of Technology, Dept. of Mining Engineering

    1999-11-01

    The fully mechanized longwall method of underground coal mining is the only technology that can offer stiff competition to surface mining methods in terms of production and productivity. It is yet to realize its full potential in India. Indian experience with mechanized longwall faces has been a mixed one with several failures and only meagre success owing to difficult geomining conditions, mismatch of equipment vis-a-vis geomining conditions, poor machine running time, inadequate maintenance strategies, lack of availability of spares on time, poor utilization, etc. A perceptible gap exists between the actual performance and potential capacity of the equipment due to frequent breakdown and, subsequently, the reduced availability of equipment package. The study analysed the down time of longwall face equipment during operation in the field. It was conducted for eight months on shearers, automated flexible conveyors, powered supports, stage loader, belt conveyors, etc. Analysis in the form of tables and pie charts illustrates the down time of each equipment. Critical components in the system that require attention were systematically identified. The equipment down time studies are beneficial on mechanized longwall faces and they must be conducted for a long period of time in the field to arrive at meaningful results. Breakdown appears to be a function of duty conditions under which a particular equipment operates. Powered supports are most prone to breakdown on a mechanized longwall face followed by shearer and automated flexible conveyors. Belt conveyors are the most reliable in operation. 7 refs., 3 figs., 3 tabs.

  7. French approval procedures for pyrotechnical automotive safety equipments

    OpenAIRE

    Aufauvre, Lionel; Branka, Ruddy

    2005-01-01

    International audience; Pyrotechnical articles for civil uses may be subject to national procedures before placing on the market According to the French decree n°90-153, 16 February 1990 as modified; explosives that are dispensed with EC marking and that are not excluded of the decree application have to conform to approved types. Pyrotechnical automotive safety equipments such gas generators for airbag modules or seat-belt pretensioners, pyrotechnie relay compositions and/or igniters inside ...

  8. 7 CFR 1717.613 - RUS approval of data processing and system control equipment.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 11 2010-01-01 2010-01-01 false RUS approval of data processing and system control... system control equipment. If a borrower's mortgage or loan contract requires the borrower to obtain approval from RUS before purchasing data processing equipment or system control equipment, such approval...

  9. ANSI / FM Approvals 2510 flood abatement equipment test standard

    Directory of Open Access Journals (Sweden)

    Kravetz Frédéric

    2016-01-01

    Full Text Available Natural hazards, including flooding, continue to be the leading cause of commercial and industrial property damage worldwide. Until recently, there has been a limited amount of readily available guidance on choosing flood abatement protection. FM Approvals, a division of FM Global, one of the world’s largest business property insurers, working together with the Association of State Floodplain Managers and the US Army Corps of Engineers have developed a National Flood Barrier Test Program after recognizing the urgent demand for reliable flood abatement products to mitigate potential losses. This lead to the ANSI/ FM2510 flood abatement equipment standard.

  10. Duchenne muscular dystrophy drugs face tough path to approval.

    Science.gov (United States)

    Hodgkinson, L; Sorbera, L; Graul, A I

    2016-03-01

    Highly anticipated as new disease-modifying treatments for Duchenne muscular dystrophy (DMD), therapeutics by BioMarin Pharmaceutical (Kyndrisa™; drisapersen) and Sarepta Therapeutics (eteplirsen; AVI-4658) both recently received negative FDA reviews and are now facing battles for approval in the U.S. At present, BioMarin is committed to working with the FDA to forge a pathway to approval following the failure of its NDA, while Sarepta awaits the formal decision on its NDA, which is expected by late May 2016. Despite the critical nature of both reviews, analysts consider that there is still a narrow possibility of approval of both drugs. According to Consensus forecasts from Thomson Reuters Cortellis for Competitive Intelligence, Kyndrisa is forecast to achieve sales of USD 533.71 million in 2021.

  11. 30 CFR 75.523-2 - Deenergization of self-propelled electric face equipment; performance requirements.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Deenergization of self-propelled electric face... Electrical Equipment-General § 75.523-2 Deenergization of self-propelled electric face equipment; performance requirements. (a) Deenergization of the tramming motors of self-propelled electric face equipment, required...

  12. 30 CFR 75.506-1 - Electric face equipment; permissible condition; maintenance requirements.

    Science.gov (United States)

    2010-07-01

    ... Equipment-General § 75.506-1 Electric face equipment; permissible condition; maintenance requirements. (a... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Electric face equipment; permissible condition; maintenance requirements. 75.506-1 Section 75.506-1 Mineral Resources MINE SAFETY AND HEALTH...

  13. 47 CFR 68.211 - Terminal equipment approval revocation procedures.

    Science.gov (United States)

    2010-10-01

    ... CARRIER SERVICES (CONTINUED) CONNECTION OF TERMINAL EQUIPMENT TO THE TELEPHONE NETWORK Terminal Equipment... to cause harms to the public switched telephone network, as defined in § 68.3; (3) The responsible... authorized for connection to the public switched telephone network for a period of six months from the...

  14. 30 CFR 75.505 - Mines classed gassy; use and maintenance of permissible electric face equipment.

    Science.gov (United States)

    2010-07-01

    ... Electrical Equipment-General § 75.505 Mines classed gassy; use and maintenance of permissible electric face... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Mines classed gassy; use and maintenance of permissible electric face equipment. 75.505 Section 75.505 Mineral Resources MINE SAFETY AND...

  15. 30 CFR 75.523-1 - Deenergization of self-propelled electric face equipment installation requirements.

    Science.gov (United States)

    2010-07-01

    ... after December 15, 1974, for self-propelled cutting machines, shuttle cars, battery-powered machines... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Deenergization of self-propelled electric face... Electrical Equipment-General § 75.523-1 Deenergization of self-propelled electric face equipment installation...

  16. 设备购置审批流程的数字化%Digitalization of Equipment Purchasing Approval Process

    Institute of Scientific and Technical Information of China (English)

    谢素萍; 杨树国; 王琦; 马文川

    2012-01-01

    The examination and approval of equipment purchasing is one of the key factors in equipment management. The use of paper documents in the examination and approval of equipment purchasing has some weaknesses. Based on the current management regulations and methods, the digitalization of management of equipment purchasing is realized through the construction of online examination and approval system by the application of computer technologies, networking technologies and other information technologies, making it more convenient and efficient for the examination of equipment purchase application. This is the basis for equipment management informatization.%设备购置审批是设备管理中的重要环节,传统纸质公文流转的方式存在很多弊端.设备购置审批流程的数字化是以学校现行管理制度为基础,利用计算机网络等数字化技术,通过设备购置网上审批系统的建设与应用,将制度化、规范化的办公流程数字化,实现网上办公,提高工作效率,是实现设备管理信息化的基础.

  17. 30 CFR 18.82 - Permit to use experimental electric face equipment in a gassy mine or tunnel.

    Science.gov (United States)

    2010-07-01

    ... thereon or separately; a wiring diagram; and descriptive material necessary to insure safe operation of... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Permit to use experimental electric face... ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS ELECTRIC...

  18. 30 CFR 75.1710-1 - Canopies or cabs; self-propelled diesel-powered and electric face equipment; installation...

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Canopies or cabs; self-propelled diesel-powered... STANDARDS-UNDERGROUND COAL MINES Miscellaneous § 75.1710-1 Canopies or cabs; self-propelled diesel-powered... this section, all self-propelled diesel-powered and electric face equipment, including shuttle...

  19. Face haulage equipment failure analysis. Volume I. Technical information and conclusions. Final technical report as of November 30, 1980

    Energy Technology Data Exchange (ETDEWEB)

    Patterson, W.N.; Orona, F.

    1980-11-01

    Face haulage equipment used in conjunction with continuous miners (shuttle cars, diesel haulers, battery scoops, and bridge conveyors) was investigated by recording section delay reports for computer analysis to determine the effect of haulage equipment failures and downtime on productivity, pinpoint the causes of machine failures and downtime, and develop the possible design and operational changes required to reduce machine failures and downtime and increase section productivity. For the mobile vehicle type of haulage (shuttle car, diesel hauler, and battery scoop) failure of one unit in multiple unit haulage operations would not normally stop section production. Bridge conveyors as a haulage system provide continuous haulage of section production but when any part of the bridge system fails, the section production is stopped. In the course of this program, it was determined through the use of daily section shift reports on 200 machines that face haulage equipment is responsible for about 40 to 56 minutes of lost section production time per shift. The most prevalent failure for shuttle cars was found to be the trailing cable umbilical. Bridge conveyors had the most trouble with the conveyor subsystem. Discussions of these and other recorded failures are developed with possible solutions outlined for future implementation. This report only covers the face haulage element of the continuous miner system. Companion reports were developed for the continuous miner and roof bolter elements under separate task orders.

  20. Legal and regulatory challenges currently facing diabetes treatment providers and related durable medical equipment suppliers.

    Science.gov (United States)

    Liles, Robert

    2013-03-01

    It has been estimated that 24 million Americans have diabetes, many of whom are Medicare beneficiaries. These individuals carefully monitor their blood glucose levels primarily through the use of in-home blood glucose testing kits. Although the test is relatively simple, the cumulative expense of providing glucose test strips and lancets to patients is ever increasing, both to the Medicare program and to uninsured individuals who must pay out-of-pocket for these testing supplies. This article discusses the diabetes durable medical equipment (DME) coverage under Part B Medicare, the establishment and role of DME Medicare administrative contractors, and national and local coverage requirements for diabetes DME suppliers. This article also discusses the federal government's ongoing concerns regarding the improper billing of diabetes testing supplies. To protect the Medicare Trust Fund, the federal government has contracted with multiple private entities to conduct reviews and audits of questionable Medicare claims. These private sector contractors have conducted unannounced site visits of DME supplier offices, interviewed patients and their families, placed suppliers on prepayment review, and conducted extensive postpayment audits of prior paid Medicare claims. In more egregious administrative cases, Medicare contractors have recommended that problematic providers and/or DME suppliers have their Medicare numbers suspended or, in some instances, revoked. More serious infractions can lead to civil or criminal liability. In the final part of this article, we will examine the future of enforcement efforts by law enforcement and Medicare contractors and the importance of understanding and complying with federal laws when ordering and supplying diabetes testing strips and lancets.

  1. Conservation in the face of climate change: recent developments [version 1; referees: 3 approved

    Directory of Open Access Journals (Sweden)

    Joshua Lawler

    2015-10-01

    Full Text Available An increased understanding of the current and potential future impacts of climate change has significantly influenced conservation in practice in recent years. Climate change has necessitated a shift toward longer planning time horizons, moving baselines, and evolving conservation goals and targets. This shift has resulted in new perspectives on, and changes in, the basic approaches practitioners use to conserve biodiversity. Restoration, spatial planning and reserve selection, connectivity modelling, extinction risk assessment, and species translocations have all been reimagined in the face of climate change. Restoration is being conducted with a new acceptance of uncertainty and an understanding that goals will need to shift through time. New conservation targets, such as geophysical settings and climatic refugia, are being incorporated into conservation plans. Risk assessments have begun to consider the potentially synergistic impacts of climate change and other threats. Assisted colonization has gained acceptance in recent years as a viable and necessary conservation tool. This evolution has paralleled a larger trend in conservation—a shift toward conservation actions that benefit both people and nature. As we look forward, it is clear that more change is on the horizon. To protect biodiversity and essential ecosystem services, conservation will need to anticipate the human response to climate change and to focus not only on resistance and resilience but on transitions to new states and new ecosystems.

  2. 30 CFR 28.33 - Quality control test methods, equipment, and records; review by MSHA; revocation of approval.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Quality control test methods, equipment, and... Quality Control § 28.33 Quality control test methods, equipment, and records; review by MSHA; revocation... control test methods, equipment, and records, and to interview any employee or agent of the applicant in...

  3. 78 FR 19495 - Draft Guidance for Industry on Scale-Up and Post-Approval Changes: Manufacturing Equipment...

    Science.gov (United States)

    2013-04-01

    ... HUMAN SERVICES Food and Drug Administration Draft Guidance for Industry on Scale-Up and Post-Approval...: Notice. SUMMARY: The Food and Drug Administration (FDA) is announcing the availability of a scale-up and... Oral Dosage Forms--Scale-Up and Post-Approval Changes: Chemistry, Manufacturing and Controls, In Vitro...

  4. Information on the Conversion of the Rental Contract of the Siemens 7.880 System into a Purchase Contract and Request for Approval to Purchase, without a Call for Tenders, Peripheral Equipment compatible with this system

    CERN Document Server

    1982-01-01

    Information on the Conversion of the Rental Contract of the Siemens 7.880 System into a Purchase Contract and Request for Approval to Purchase, without a Call for Tenders, Peripheral Equipment compatible with this system

  5. Evaluation of the efficiency face to the NO{sub x} emissions from European gas-fired heat process equipment

    Energy Technology Data Exchange (ETDEWEB)

    Fourniguet, M.J.; Quinqueneau, A. [Gaz de France, Saint-Denis la Plaine (France); Karll, B. [Dansk Gasteknisk Center, Hoersholm (Denmark); Breithaupt, P. Gasunie [Gasunie, Groningue (Netherlands); Jonsson, O. [Svensk Gastekniskt Center AB, Malmoe (Sweden); Navarri, P. [CETIAT, Villeurbanne (France)

    1999-10-01

    In the frame of the project, tests have been performed by Gaz de France, CETIAT, DGC, GASUNIE and SGC on 35 European industrial sites in order to depict what the European industry using natural gas as an energy source actually looks like in 1997, the levels of efficiency and nitrogen oxides (NOx) emissions currently being achieved. These 35 industrial sites were chosen among the three following sectors: steam or water boilers, engines or turbines and industrial processes (food processing industry, metallurgy, ceramic, paper and textile industries). The partners focused on relatively new installations or newly retrofitted which were equipped with low NOx technologies. To create an open database between the Partners, a common EXCEL sheet has been defined and used to report the results for the three sectors concerned including principally the following items: General background on the site: it includes the description of the installation, technical characteristics of the furnace, the boiler or the engine, operating scenarios, gas total rating, and depending of the type of installation power density, rated electric power or production rate; Description of the equipment: it includes, if available, the control system of the heating equipment and the low NOx techniques identified; Description of the measurement techniques: In order to compensate for the lack of international standard, this part has been particularly detailed. It includes the description of flue gas analysers (CO, CO{sub 2}, O{sub 2}, NOx, CH{sub 4}, UHC, N{sub 2}O, VOC), metering and pressure and temperature probes in terms of measurement principle, supplier, measurement rang and accuracy and gas calibration. It precise the position of the sampling points and the type of the sampling line; Results: The operating conditions (atmospheric data, type of natural gas burnt during the test and measurement period) are given before the results themselves (complete flue gas analysis and determination of combustion

  6. Evaluation of the efficiency face to the NO{sub x} emissions from European gas-fired heat process equipment

    Energy Technology Data Exchange (ETDEWEB)

    Fourniguet, M.J.; Quinqueneau, A. [Gaz de France, Saint-Denis la Plaine (France); Karll, B. [Dansk Gasteknisk Center, Hoersholm (Denmark); Breithaupt, P. Gasunie [Gasunie, Groningue (Netherlands); Jonsson, O. [Svensk Gastekniskt Center AB, Malmoe (Sweden); Navarri, P. [CETIAT, Villeurbanne (France)

    1999-10-01

    In the frame of the project, tests have been performed by Gaz de France, CETIAT, DGC, GASUNIE and SGC on 35 European industrial sites in order to depict what the European industry using natural gas as an energy source actually looks like in 1997, the levels of efficiency and nitrogen oxides (NOx) emissions currently being achieved. These 35 industrial sites were chosen among the three following sectors: steam or water boilers, engines or turbines and industrial processes (food processing industry, metallurgy, ceramic, paper and textile industries). The partners focused on relatively new installations or newly retrofitted which were equipped with low NOx technologies. To create an open database between the Partners, a common EXCEL sheet has been defined and used to report the results for the three sectors concerned including principally the following items: General background on the site: it includes the description of the installation, technical characteristics of the furnace, the boiler or the engine, operating scenarios, gas total rating, and depending of the type of installation power density, rated electric power or production rate; Description of the equipment: it includes, if available, the control system of the heating equipment and the low NOx techniques identified; Description of the measurement techniques: In order to compensate for the lack of international standard, this part has been particularly detailed. It includes the description of flue gas analysers (CO, CO{sub 2}, O{sub 2}, NOx, CH{sub 4}, UHC, N{sub 2}O, VOC), metering and pressure and temperature probes in terms of measurement principle, supplier, measurement rang and accuracy and gas calibration. It precise the position of the sampling points and the type of the sampling line; Results: The operating conditions (atmospheric data, type of natural gas burnt during the test and measurement period) are given before the results themselves (complete flue gas analysis and determination of combustion

  7. Equipment Remote Control Technology of Longwall Mine Face%综采工作面装备远程控制技术进展报告

    Institute of Scientific and Technical Information of China (English)

    李首滨; 黄曾华; 王旭鸣; 冯银辉; 王峰

    2016-01-01

    可完全替代进口技术和产品,对我国煤矿装备制造业有着重要的现实意义。综采工作面装备远程控制技术大幅提升了综采成套装备的智能化水平,带动了我国在煤机装备自动化、智能化方面的整体技术进步,为建设大型现代化矿井提供了保障,有力地推动了我国煤炭工业的转型升级。%Because of the harsh environment and limited space in the fully mechanized work face of the coal mine, and the operator working in close distance to equipment, there isn’t refuge space,in case of emergencies. In addition, the on-site noise and dust also affect workers’ health. There is an urgent need to freeing workers from the production environment of the high risk. It is of great practical significance to study on remote control technology of fully mechanized equipment for coal mine safety, high efficiency production, labor environment improvement and the labor intensity of workers reduction. In this project, remote control technology of fully mechanized equipment is studied. The successful implementation of the unmanned operation technology of fully mechanized coal make the fewer people attended safe and efficient automation production realized. The breakthrough of core technologies of intelligent control system for fully mechanized coal mining equipment are reached. The monitoring hosts and the console located in underground equipment train or ground scheduling command center can remotely control the work face equipment start-stop, automation production and artificial intervention, combining fully mining equipment run data and the face video system. It is achieved that in normal production process mining machine memory cut coal is mainly performed, artificial remote intervention supplemented;the supporter following mining machine automati-cally action is mainly performed, artificial remote intervention supplemented.The automation control is mainly performed, local control supplemented

  8. 面向任务的装甲装备主动式保障HTPN过程建模%Modeling of Armored Equipment Autonomic Logistics HTPN Process Facing Mission

    Institute of Scientific and Technical Information of China (English)

    张会奇; 陈春良; 毕占东; 刘峻岩; 张咏清

    2014-01-01

    In order to realize armored equipment autonomic logistics and advance the transformation of the armored equipment support mode, the models of the armored equipment autonomic logistic system mission faced are established. The conception model of the armored equipment autonomic logistics system is constructed applying the UML using case chart, and the process of the armored equipment autonomic logistics is analyzed, got the main activities as well as the sequence relation of the armored equipment autonomic logistics mission faced. Applying the HTPN modeling method, the logic and sequence model of the armored equipment autonomic logistics process mission faced is established. By means of calculating the input data of the model, the time indexes of the armored equipment autonomic logistics process mission faced are gained, and the analysis of the instance is given. The analysis result proves that the model could be used for the calculation of the armored vehicle driving training mission autonomic logistics process time indexes, which provides an available method for researching the armored equipment autonomic logistics process.%为实现装甲装备主动式保障、促进装甲装备保障模式转变,对面向任务的装甲装备主动式保障系统进行建模。应用UML用例图构建装甲装备主动式保障系统概念模型,分析面向任务的装甲装备主动式保障过程,得到面向任务的装甲装备主动式保障的主要活动及其时序关系;应用 HTPN 建模方法,构建面向任务的主动式保障过程逻辑时序模型,通过对模型输入数据测算,得到面向任务的装甲装备主动式保障过程时效性指标,并进行实例分析。分析结果证明:该模型能得到某型装甲车辆驾驶训练任务主动式保障过程时效性指标,为定量研究装备主动式保障提供了有效方法。

  9. PIG CARCASS CLASSIFICATION IN ROMANIA: A DISSECTION TRIAL FOR THE APPROVAL OF THE “FAT-O-MEAT’ER” AND OF THE “OPTIGRADE-PRO”EQUIPMENT

    Directory of Open Access Journals (Sweden)

    Monica Esperance GĂUREANU

    2014-12-01

    Full Text Available The objective of this study was to obtain new regression formulas for optical equipment Fat-O-Meat’er and OptiGrade-PRO in pig carcass classification in Romania. The estimation of lean mean content in pig carcasses by means of SEUROP system and following fair payment based on the weight and composition of the carcass pigs in the main objective of classification. Dissection of four main cuts (shoulder, loin, ham, belly of pig carcasses (n = 145 were performed. The measurement of backfat and muscle depths using probes were taken from the carcasses within 45 min. after slaughter of pigs. Lean meat content estimated using different methods and determined from dissections was equal (56,3 % . There were calculated new regression formulas using the multiplied regression analysis. Correct regression formulas for classification equipments have a big importance. The requirements on accuracy of regression formulas are laid out in the Commission Regulation No 3127 / 94 and means of dissection according to the method by Walstra and Merkus (1996

  10. 46 CFR 162.050-23 - Separator: Approval tests.

    Science.gov (United States)

    2010-10-01

    ...: SPECIFICATIONS AND APPROVAL ENGINEERING EQUIPMENT Pollution Prevention Equipment § 162.050-23 Separator: Approval... hour, the separator must be inclined at an angle of 22.5° with the plane of its normal...

  11. 我国园林绿化装备发展面临的新形势%The New Situation Faced by the Development of China's Garden Landscaping Equipment

    Institute of Scientific and Technical Information of China (English)

    赵平

    2011-01-01

    分析了我国园林绿化装备发展面临的新形势,其主要包括政策环境改变、产业化发展已进入瓶颈、城市的发展需要协调和谐等三方面。%The new situation faced by the development of China's garden landscaping equipment is including changes in policies and environment, industrial development's entry into the bottleneck development requiring coordination and harmony analyzed, mainly period and urban

  12. 46 CFR 160.005-7 - Procedure for approval.

    Science.gov (United States)

    2010-10-01

    ...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Life Preservers, Fibrous Glass, Adult and Child (Jacket Type), Models 52 and 56 § 160.005-7 Procedure for approval. General. Manufacturers seeking approval of a life...

  13. 46 CFR 160.002-7 - Procedure for approval.

    Science.gov (United States)

    2010-10-01

    ...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Life Preservers, Kapok, Adult and Child (Jacket Type), Models 3 and 5 § 160.002-7 Procedure for approval. General. Manufacturers seeking approval of a life preserver...

  14. The Pixel Detector of the ATLAS experiment for the Run2 at the Large Hadron Collider -- Plot Approval (Pixel, IBL) : This is a submission of plot approval request for Pixel+IBL, facing on a talk at ICHEP 2014 conference

    CERN Document Server

    Mandelli, B; The ATLAS collaboration

    2014-01-01

    The Pixel Detector of the ATLAS experiment has shown excellent performance during the whole Run-1 of LHC. Taking advantage of the long showdown, the detector was extracted from the experiment and brought to surface, to equip it with new service quarter panels, to repair modules and to ease installation of the Insertable B-Layer (IBL). IBL is a fourth layer of pixel detectors, and will be installed in May 2014 between the existing Pixel Detector and a new smaller radius beam-pipe at a radius of 3.3 cm. To cope with the high radiation and pixel occupancy due to the proximity to the interaction point, a new read-out chip and two different silicon sensor technologies (planar and 3D) have been developed. Furthermore, the physics performance will be improved through the reduction of pixel size while, targeting for a low material budget, a new mechanical support using lightweight staves and a CO2 based cooling system have been adopted. IBL construction is now completed. An overview of the IBL project as well as the ...

  15. Study on Wireless Mesh Network Applied to Remote Monitoring and Control of Electromechanical Equipment in Fully Mechanized Coal Mining Face%无线Mesh网络在综采面机电设备远程监控的研究

    Institute of Scientific and Technical Information of China (English)

    季晓刚; 王忠宾; 周信

    2011-01-01

    In order to realize the remote control of the electromechanical equipment applied to the fully mechanized coal mining face, the paper analyzed the advantages and disadvantages of the wire industrial ethernet, traditional wireless communication way and the new technical Zigbee and others applied to the underground mine. The research and development of the intrinsic safe wireless network system was provided based on the wireless Mesh technology and a wireless Mesh network was established for the electromechanical equipment of the fully mechanized coal mining face. The paper stated the design principle and operation theory of the general frame and the nodes. The industrial trial results from No. 2 Mine of Pingdingshan Coal Mining Group showed that according to the length and slope of the coal mining face, a certain amount of wireless Mesh switchboards was selected. The critical value of the received signal strength would be -85 dBm. The distance between the Mesh switchboards was adjusted and generally the disposable distance between the two Mesh switchboards would not be over 66 m. The antenna of the switchboard should be installed in horizontal or upward. Thus the wireless Mesh network would have excellent communication effect in the fully mechanized coal mining face and could meet the requirements of the performances data and video transmission of the electromechanical equipment.%为了实现煤矿综采工作面机电装备的远程监控,分析了有线工业以太网、传统无线通信方式及新型技术Zigbee等在煤矿井下应用的优缺点;提出基于无线Mesh技术研发本安型无线网络系统;构建了煤矿综采工作面机电设备的无线Mesh网络;阐述了其总体架构、节点的设计原则及其工作原理.在平煤股份二矿进行的工业性试验结果表明:根据工作面的长度和坡度,选择一定数量的无线Mesh交换机,以接收信号强度-85 dBm为临界点,调整Mesh交换机之间的距离,一般以任意2个

  16. 75 FR 13337 - Notice of Passenger Facility Charge (PFC) Approvals and Disapprovals

    Science.gov (United States)

    2010-03-19

    .... Security improvements. Snow equipment purchase--liquid deice truck. Brief Description of Project Approved... annual enplanements at Dallas Love Field. Brief Description of Projects Approved for Collection and...

  17. Drilling equipment

    Energy Technology Data Exchange (ETDEWEB)

    Voyevodin, Yu.M.; Kholosha, Ye.G.; Leshchenko, A.G.; Timchenko, A.I.

    1979-01-10

    The invention refers to units designed for extracting minerals by mechanical action on the face by a cutting tool. There is a known drills which includes a pulse device which contains a combustion chamber, cylinder, piston-percussion tool and cutting tool. The combustion chamber and the sub-piston cavity of the cylinder are connected by a channel in which there is a distributor. Its shortcoming is the fact that the pulse device does not guarantee the necessary motion of the actuating mechanism for its velocity and frequency of the shocks on the cutting tool. This reduces the efficiency of the operation and limits the area of application. The purpose of the proposed invention is to improve productivity of the device. This is achieved because the head of the drill is equipped with a 2-piston pulse device which contains 2-combustion chambers, 2 working cylinders, 2 piston percussion instruments, a rod with gas-conducting and connecting channels for interconnection of the sub-piston cavities and combustion chambers of both cylinders. The spent gases of one cylinder are used for closing the combustion chamber of the second cylinder.

  18. Proposal for the donation of LEP equipment

    CERN Document Server

    2000-01-01

    CERN has announced that LEP equipment will become available for donations to educational and scientific research institutes, to museums and public bodies in Member States and non-member States. A number of requests for a limited amount of equipment have been received. CERN has no further use for this equipment. The Finance Committee is invited to approve these donations.

  19. 7 CFR 58.222 - Dry dairy product cooling equipment.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Dry dairy product cooling equipment. 58.222 Section 58... DAIRY PRODUCTS 1 General Specifications for Dairy Plants Approved for USDA Inspection and Grading Service 1 Equipment and Utensils § 58.222 Dry dairy product cooling equipment. Cooling equipment shall...

  20. 46 CFR 160.056-7 - Procedure for approval.

    Science.gov (United States)

    2010-10-01

    ...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Rescue Boat § 160.056-7 Procedure for approval. (a) The... jurisdiction of the place of manufacture of the rescue boat. (b) Formal plans will not be required. However, a... descriptive data of hull material, buoyant material, and equipment. (c) When plans and data are satisfactory...

  1. Face pain

    Science.gov (United States)

    ... begin in other places in the body. Abscessed tooth (ongoing throbbing pain on one side of the lower face that ... face, and aggravated by eating. Call a dentist. Pain is persistent, ... by other unexplained symptoms. Call your primary provider.

  2. 7 CFR 1753.68 - Purchasing special equipment.

    Science.gov (United States)

    2010-01-01

    ... $500,000 or 25% of the loan, whichever is less, sends two copies to GFR for approval. (ii) For projects... the GFR for approval. The borrower may request RUS approval to negotiate for the purpose of... equipment, the borrower shall arrange with the contractor's installer and the GFR for acceptance tests....

  3. Research on key technology of revolving mining the triangle coal in boundaries of full-mechanized caving mining face with heavy equipment%重型装备综放工作面旋转开采边界三角煤关键技术研究∗

    Institute of Scientific and Technical Information of China (English)

    高维智; 张会军; 张学亮

    2015-01-01

    由于重型装备的综放工作面支架吨位大,前后部刮板输送机与转载机等端头设备搭接关系极其复杂,设备旋转过程中调架、移动管理难度极大,效率较低。因此,从重型设备综放工作面的设备搭接、工艺优化、巷道布置等方面做了详细研究,提出了重型装备综放工作面旋转开采成套关键技术。%The supports in full-mechanized caving mining face with heavy equipment have large tonnage,the lapping relations of end equipment such as scraper conveyer and reversed load-er are extremely complex,the difficulty of support shifting and movement management in process of equipment revolving is great and the efficiency is low. Based on above problems,e-quipment lapping,process optimization and roadway layout were researched,and the complete key technology of revolving mining in full-mechanized caving mining face with heavy equipment was put forward.

  4. Equipment Obsolescence Management Program

    Energy Technology Data Exchange (ETDEWEB)

    Redmond, J.

    2014-07-01

    Nuclear Power Plant (NPP) Operators are challenged with securing reliable supply channels for safety related equipment due to equipment obsolescence. Many Original Equipment Manufacturers (OEMs) have terminated production of spare parts and product life-cycle support. The average component life cycles are much shorter than the NPP design life, which means that replacement components and parts for the original NPP systems are not available for the complete design life of the NPPs. The lack or scarcity of replacement parts adversely affects plant reliability and ultimately the profitability of the affected NPPs. This problem is further compounded when NPPs pursue license renewal and approval for plant-life extension. A reliable and predictable supply of replacement co components is necessary for NPPs to remain economically competitive and meet regulatory requirements and guidelines. Electrical and I and C components, in particular, have short product life cycles and obsolescence issues must be managed pro actively and not reactively in order to mitigate the risk to the NPP to ensure reliable and economic NPP operation. (Author)

  5. About Face

    Medline Plus

    Full Text Available Skip to Content Menu Closed (Tap to Open) Home Videos by Topic Videos by Type Search All ... What is AboutFace? Resources for Professionals Get Help Home Watch Videos by Topic Videos by Type Search ...

  6. About Face

    Medline Plus

    Full Text Available ... Home Videos by Topic Videos by Type Search All Videos PTSD Basics PTSD Treatment What is AboutFace? ... Watch Videos by Topic Videos by Type Search All Videos Learn More PTSD Basics PTSD Treatment What ...

  7. Face Forward

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Last November, surgeons in France successfully performed the world's first face transplant surgery. Ten days later, Chen Huanran in Beijing began soliciting patients who were ready to accept a face transplant, searching for China's first such patient through an advertisement on his website and other channels. Chen, chief orthopedic surgeon at the Plastic Surgery Hospital under the Chinese Academy of Medical Sciences, has conducted more than 300 transsexual operations and was considered one of the top com...

  8. Some trial methods of plant protection equipments in Turkey.

    OpenAIRE

    Erimgüner, G.

    2008-01-01

    The Plant Protection Equipments Laboratory of the: Institute for the Plant Protection Chemicals and Equipments in Ankara is handling the mechanical and practical testing of; the equipments intended to be put in Turkey's markets. The testing is carried out as a part of the procedure of the approval scheme. In this article the detailed information's covering the mechanical and practical features required from the «equipments is given.

  9. Drugs Approved for Melanoma

    Science.gov (United States)

    ... Ask about Your Treatment Research Drugs Approved for Melanoma This page lists cancer drugs approved by the ... that are not listed here. Drugs Approved for Melanoma Aldesleukin Cobimetinib Cotellic (Cobimetinib) Dabrafenib Dacarbazine DTIC-Dome ( ...

  10. Aquatic Equipment Information.

    Science.gov (United States)

    Sova, Ruth

    Equipment usually used in water exercise programs is designed for variety, intensity, and program necessity. This guide discusses aquatic equipment under the following headings: (1) equipment design; (2) equipment principles; (3) precautions and contraindications; (4) population contraindications; and (5) choosing equipment. Equipment is used…

  11. 14 CFR 125.207 - Emergency equipment requirements.

    Science.gov (United States)

    2010-01-01

    ... equipment: (1) One approved first aid kit for treatment of injuries likely to occur in flight or in a minor... crewmembers. (2) A crash axe carried so as to be accessible to the crew but inaccessible to passengers during...

  12. About Face

    Medline Plus

    Full Text Available ... PTSD (posttraumatic stress disorder). Watch the intro This is AboutFace In these videos, Veterans, family members, and ... to hear what they have to say. What is PTSD? → How does PTSD affect loved ones? → Am ...

  13. About Face

    Medline Plus

    Full Text Available ... traumatic event — like combat, an assault, or a disaster — it's normal to feel scared, keyed up, or sad at first. But if it's been months or years since the trauma and you're not feeling better, you may have PTSD (posttraumatic stress disorder). Watch the intro This is AboutFace In ...

  14. Reading faces and Facing words

    DEFF Research Database (Denmark)

    Robotham, Julia Emma; Lindegaard, Martin Weis; Delfi, Tzvetelina Shentova

    It has long been argued that perceptual processing of faces and words is largely independent, highly specialised and strongly lateralised. Studies of patients with either pure alexia or prosopagnosia have strongly contributed to this view. The aim of our study was to investigate how visual...

  15. Reading faces and Facing words

    DEFF Research Database (Denmark)

    Robotham, Julia Emma; Lindegaard, Martin Weis; Delfi, Tzvetelina Shentova

    performed within normal range on at least one test of visual categorisation, strongly suggesting that their abnormal performance with words and faces does not represent a generalised visuo-perceptual deficit. Our results suggest that posterior areas in both hemispheres may be critical for both reading...

  16. 7 CFR 322.4 - Approved regions.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 5 2010-01-01 2010-01-01 false Approved regions. 322.4 Section 322.4 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE BEES, BEEKEEPING BYPRODUCTS, AND BEEKEEPING EQUIPMENT Importation of...

  17. Quantified Faces

    DEFF Research Database (Denmark)

    Sørensen, Mette-Marie Zacher

    2016-01-01

    Abstract: The article presents three contemporary art projects that, in various ways, thematise questions regarding numerical representation of the human face in relation to the identification of faces, for example through the use of biometric video analysis software, or DNA technology. The Dutch...... and critically examine bias in surveillance technologies, as well as scientific investigations, regarding the stereotyping mode of the human gaze. The American artist Heather Dewey-Hagborg creates three-dimensional portraits of persons she has “identified” from their garbage. Her project from 2013 entitled....... The three works are analysed with perspectives to historical physiognomy and Francis Galton's composite portraits from the 1800s. It is argued that, rather than being a statistical compression like the historical composites, contemporary statistical visual portraits (composites) are irreversible...

  18. 30 CFR 75.1310 - Explosives and blasting equipment.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Explosives and blasting equipment. 75.1310... SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Explosives and Blasting § 75.1310 Explosives and blasting equipment. (a) Only permissible explosives, approved sheathed explosive units,...

  19. Perkins Bill is Approved by Congress

    Science.gov (United States)

    Cavanagh, Sean

    2006-01-01

    Career and technical education programs will face new pressure to show that they are academically rigorous and guiding high school students through a lineup of courses that prepares them for college or the workplace, under a bill approved by Congress. The reauthorization of the federal law known as the Perkins Act--dealing with what traditionally…

  20. 78 FR 28773 - Approval and Promulgation of Air Quality Implementation Plans; Maryland; Adoption of Control...

    Science.gov (United States)

    2013-05-16

    ... AGENCY 40 CFR Part 52 Approval and Promulgation of Air Quality Implementation Plans; Maryland; Adoption...: EPA is proposing to approve revisions to the Maryland State Implementation Plan (SIP) submitted by the... equipment, automotive or transportation equipment, interior or exterior automotive parts, construction...

  1. FACE RECOGNITION FROM FRONT-VIEW FACE

    Institute of Scientific and Technical Information of China (English)

    WuLifang; ShenLansun

    2003-01-01

    This letter presents a face normalization algorithm based on 2-D face model to rec-ognize faces with variant postures from front-view face.A 2-D face mesh model can be extracted from faces with rotation to left or right and the corresponding front-view mesh model can be estimated according to facial symmetry.Then based on the relationship between the two mesh models,the nrmalized front-view face is formed by gray level mapping.Finally,the face recognition will be finished based on Principal Component Analysis(PCA).Experiments show that better face recognition performance is achieved in this way.

  2. FACE RECOGNITION FROM FRONT-VIEW FACE

    Institute of Scientific and Technical Information of China (English)

    Wu Lifang; Shen Lansun

    2003-01-01

    This letter presents a face normalization algorithm based on 2-D face model to recognize faces with variant postures from front-view face. A 2-D face mesh model can be extracted from faces with rotation to left or right and the corresponding front-view mesh model can be estimated according to the facial symmetry. Then based on the inner relationship between the two mesh models, the normalized front-view face is formed by gray level mapping. Finally, the face recognition will be finished based on Principal Component Analysis (PCA). Experiments show that better face recognition performance is achieved in this way.

  3. Post-Approval Studies

    Data.gov (United States)

    U.S. Department of Health & Human Services — The CDRH Post-Approval Studies Program encompasses design, tracking, oversight, and review responsibilities for studies mandated as a condition of approval of a...

  4. Equipment. Out of order.

    Science.gov (United States)

    Connolly, C

    2000-08-17

    The NHS has underinvested in equipment for more than 20 years. Most hospitals have inadequate equipment inventories. More than half the anaesthetic machines in use are more than five years old and should be replaced. Almost a fifth of the equipment used in cancer treatment is obsolete. Current accounting systems act as a disincentive to replacing old equipment.

  5. Famous face recognition, face matching, and extraversion.

    Science.gov (United States)

    Lander, Karen; Poyarekar, Siddhi

    2015-01-01

    It has been previously established that extraverts who are skilled at interpersonal interaction perform significantly better than introverts on a face-specific recognition memory task. In our experiment we further investigate the relationship between extraversion and face recognition, focusing on famous face recognition and face matching. Results indicate that more extraverted individuals perform significantly better on an upright famous face recognition task and show significantly larger face inversion effects. However, our results did not find an effect of extraversion on face matching or inverted famous face recognition.

  6. Face-to-face: Perceived personal relevance amplifies face processing.

    Science.gov (United States)

    Bublatzky, Florian; Pittig, Andre; Schupp, Harald T; Alpers, Georg W

    2017-05-01

    The human face conveys emotional and social information, but it is not well understood how these two aspects influence face perception. In order to model a group situation, two faces displaying happy, neutral or angry expressions were presented. Importantly, faces were either facing the observer, or they were presented in profile view directed towards, or looking away from each other. In Experiment 1 (n = 64), face pairs were rated regarding perceived relevance, wish-to-interact, and displayed interactivity, as well as valence and arousal. All variables revealed main effects of facial expression (emotional > neutral), face orientation (facing observer > towards > away) and interactions showed that evaluation of emotional faces strongly varies with their orientation. Experiment 2 (n = 33) examined the temporal dynamics of perceptual-attentional processing of these face constellations with event-related potentials. Processing of emotional and neutral faces differed significantly in N170 amplitudes, early posterior negativity (EPN), and sustained positive potentials. Importantly, selective emotional face processing varied as a function of face orientation, indicating early emotion-specific (N170, EPN) and late threat-specific effects (LPP, sustained positivity). Taken together, perceived personal relevance to the observer-conveyed by facial expression and face direction-amplifies emotional face processing within triadic group situations. © The Author (2017). Published by Oxford University Press.

  7. Phage approved in food, why not as a therapeutic?

    Science.gov (United States)

    Sarhan, Wessam A; Azzazy, Hassan M E

    2015-01-01

    Bacterial resistance is not only restricted to human infections but is also a major problem in food. With the marked decrease in produced antimicrobials, the world is now reassessing bacteriophages. In 2006, ListShield™ received the US FDA approval for using phage in food. Nevertheless, regulatory approval of phage-based therapeutics is still facing many challenges. This review highlights the use of bacteriophages as biocontrol agents in the food industry. It also focuses on the challenges still facing the regulatory approval of phage-based therapeutics and the proposed approaches to overcome such challenges.

  8. 30 CFR 18.51 - Electrical protection of circuits and equipment.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Electrical protection of circuits and equipment... TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS ELECTRIC MOTOR-DRIVEN MINE EQUIPMENT AND ACCESSORIES Construction and Design Requirements § 18.51 Electrical protection of circuits and equipment. (a) An...

  9. Common NICU Equipment

    Science.gov (United States)

    ... newborn intensive care unit (NICU) > Common NICU equipment Common NICU equipment E-mail to a friend Please ... Baby Caring for your baby Feeding your baby Common illnesses Family health & safety Complications & Loss Pregnancy complications ...

  10. Equipments for Dyeing & Finishing are Facing Low Carbon

    Institute of Scientific and Technical Information of China (English)

    Zhang Shimiao

    2010-01-01

    @@ Dyeing & finishing industry makes it possible for textile products to present colorful world on them.When it beautifies human's life immensely,it also makes great consumption of energy and resources,and causes environmental pollution.

  11. Co-operation Equipment Qualification for Safety grade I and C Equipment between Russia and Korea

    Energy Technology Data Exchange (ETDEWEB)

    Ham, J. K.; Lee, D. H.; Park, J. W.; Jeong, M. H.; Choi, Y. H.; Suh, J. J.; Jang, T. H. [Korea Testing Laboratory, Seoul (Korea, Republic of)

    2007-06-15

    Equipment Qualification technology for I and C system on nuclear grade have been approved with accurate and safe for verifying and validation. It contributes to acknowledge of reliability and to review of user approval. Also it did not completely satisfied the requirement of Russia, it can be satisfied by bit of modification on design. It is expected to support the export of safety PLC to nuclear power plant. Proven EQ technology is required on the further markets of nuclear. Therefore, comparison test with foreign country is necessary to support the mutual accreditation of EQ for export of domestic products.

  12. Co-operation Equipment Qualification for Safety grade I and C Equipment between Russia and Korea

    Energy Technology Data Exchange (ETDEWEB)

    Ham, J. K.; Lee, D. H.; Park, J. W.; Jeong, M. H.; Choi, Y. H.; Suh, J. J.; Jang, T. H. [Korea Testing Laboratory, Seoul (Korea, Republic of)

    2007-06-15

    Equipment Qualification technology for I and C system on nuclear grade have been approved with accurate and safe for verifying and validation. It contributes to acknowledge of reliability and to review of user approval. Also it did not completely satisfied the requirement of Russia, it can be satisfied by bit of modification on design. It is expected to support the export of safety PLC to nuclear power plant. Proven EQ technology is required on the further markets of nuclear. Therefore, comparison test with foreign country is necessary to support the mutual accreditation of EQ for export of domestic products.

  13. Renewal of radiological equipment.

    Science.gov (United States)

    2014-10-01

    In this century, medical imaging is at the heart of medical practice. Besides providing fast and accurate diagnosis, advances in radiology equipment offer new and previously non-existing options for treatment guidance with quite low morbidity, resulting in the improvement of health outcomes and quality of life for the patients. Although rapid technological development created new medical imaging modalities and methods, the same progress speed resulted in accelerated technical and functional obsolescence of the same medical imaging equipment, consequently creating a need for renewal. Older equipment has a high risk of failures and breakdowns, which might cause delays in diagnosis and treatment of the patient, and safety problems both for the patient and the medical staff. The European Society of Radiology is promoting the use of up-to-date equipment, especially in the context of the EuroSafe Imaging Campaign, as the use of up-to-date equipment will improve quality and safety in medical imaging. Every healthcare institution or authority should have a plan for medical imaging equipment upgrade or renewal. This plan should look forward a minimum of 5 years, with annual updates. Teaching points • Radiological equipment has a definite life cycle span, resulting in unavoidable breakdown and decrease or loss of image quality which renders equipment useless after a certain time period.• Equipment older than 10 years is no longer state-of-the art equipment and replacement is essential. Operating costs of older equipment will be high when compared with new equipment, and sometimes maintenance will be impossible if no spare parts are available.• Older equipment has a high risk of failure and breakdown, causing delays in diagnosis and treatment of the patient and safety problems both for the patient and the medical staff.• Every healthcare institution or authority should have a plan for medical imaging equipment upgrade or replacement. This plan should look forward a

  14. LESSONS LEARNED IN TESTING OF SAFEGUARDS EQUIPMENT.

    Energy Technology Data Exchange (ETDEWEB)

    PEPPER,S.; FARNITANO,M.; CARELLI,J.; HAZELTINE,J.; BAILEY,D.

    2001-10-29

    The International Atomic Energy Agency's (IAEA) Department of Safeguards uses complex instrumentation for the application of safeguards at nuclear facilities around the world. Often, this equipment is developed through cooperation with member state support programs because the Agency's requirements are unique and are not met by commercially available equipment. Before approving an instrument or system for routine inspection use, the IAEA subjects it to a series of tests designed to evaluate its reliability. In 2000, the IAEA began to observe operational failures in digital surveillance systems. In response to the observed failures, the IAEA worked with the equipment designer and manufacturer to determine the cause of failure. An action plan was developed to correct the performance issues and further test the systems to make sure that additional operational issues would not surface later. This paper addresses the steps taken to address operation issues related to digital image surveillance systems and the lessons learned during this process.

  15. European cinema: face to face with Hollywood

    NARCIS (Netherlands)

    T. Elsaesser

    2005-01-01

    In the face of renewed competition from Hollywood since the early 1980s and the challenges posed to Europe's national cinemas by the fall of the Wall in 1989, independent filmmaking in Europe has begun to re-invent itself. European Cinema: Face to Face with Hollywood re-assesses the different debate

  16. Mapping Teacher-Faces

    Science.gov (United States)

    Thompson, Greg; Cook, Ian

    2013-01-01

    This paper uses Deleuze and Guattari's concept of faciality to analyse the teacher's face. According to Deleuze and Guattari, the teacher-face is a special type of face because it is an "overcoded" face produced in specific landscapes. This paper suggests four limit-faces for teacher faciality that actualise different mixes of significance and…

  17. 14 CFR 135.105 - Exception to second in command requirement: Approval for use of autopilot system.

    Science.gov (United States)

    2010-01-01

    ...: Approval for use of autopilot system. 135.105 Section 135.105 Aeronautics and Space FEDERAL AVIATION...: Approval for use of autopilot system. (a) Except as provided in §§ 135.99 and 135.111, unless two pilots... second in command, if it is equipped with an operative approved autopilot system and the use of...

  18. RETRIEVAL EQUIPMENT DESCRIPTIONS

    Energy Technology Data Exchange (ETDEWEB)

    J. Steinhoff

    1997-08-25

    The objective and the scope of this document are to list and briefly describe the major mobile equipment necessary for waste package (WP) retrieval from the proposed subsurface nuclear waste repository at Yucca Mountain. Primary performance characteristics and some specialized design features of the equipment are explained and summarized in the individual subsections of this document. There are no quality assurance requirements or QA controls in this document. Retrieval under normal conditions is accomplished with the same fleet of equipment as is used for emplacement. Descriptions of equipment used for retrieval under normal conditions is found in Emplacement Equipment Descriptions, DI: BCAF00000-01717-5705-00002 (a document in progress). Equipment used for retrieval under abnormal conditions is addressed in this document and consists of the following: (1) Inclined Plane Hauler; (2) Bottom Lift Transporter; (3) Load Haul Dump (LHD) Loader; (4) Heavy Duty Forklift for Emplacement Drifts; (5) Covered Shuttle Car; (6) Multipurpose Vehicle; and (7) Scaler.

  19. Design review report for modifications to RMCS safety class equipment

    Energy Technology Data Exchange (ETDEWEB)

    Corbett, J.E.

    1997-05-30

    This report documents the completion of the formal design review for modifications to the Rotary Mode Core Sampling (RMCS) safety class equipment. These modifications are intended to support core sampling operations in waste tanks requiring flammable gas controls. The objective of this review was to approve the Engineering Change Notices affecting safety class equipment used in the RMCS system. The conclusion reached by the review committee was that these changes are acceptable.

  20. 2007 special equipment safety

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    @@ The General Administration of Quality Supervision, Inspection and Quarantine of P.R.China (AQSIQ) issued a notice on May 28, 2007,requiring various locations to rectify their procedures for checking special equipment and hoisting machines for hidden problems. To further clarify and implement responsibility in the safety management of special equipment in enterprises, inspection responsibilities and test organizations related to technical assurance are to be established. Further, quality inspection departments will be supervised by law in order to improve special equipment safety.

  1. Drugs Approved for Hodgkin Lymphoma

    Science.gov (United States)

    ... Ask about Your Treatment Research Drugs Approved for Hodgkin Lymphoma This page lists cancer drugs approved by ... that are not listed here. Drugs Approved for Hodgkin Lymphoma Adcetris (Brentuximab Vedotin) Ambochlorin (Chlorambucil) Amboclorin (Chlorambucil) ...

  2. Drugs Approved for Lung Cancer

    Science.gov (United States)

    ... Ask about Your Treatment Research Drugs Approved for Lung Cancer This page lists cancer drugs approved by the ... listed here. Drugs Approved for Non-Small Cell Lung Cancer Abitrexate (Methotrexate) Abraxane (Paclitaxel Albumin-stabilized Nanoparticle Formulation) ...

  3. Drugs Approved for Thyroid Cancer

    Science.gov (United States)

    ... Ask about Your Treatment Research Drugs Approved for Thyroid Cancer This page lists cancer drugs approved by the ... that are not listed here. Drugs Approved for Thyroid Cancer Cabozantinib-S-Malate Caprelsa (Vandetanib) Cometriq (Cabozantinib-S-Malate) Doxorubicin ...

  4. Medical equipment management

    CERN Document Server

    Willson, Keith; Tabakov, Slavik

    2013-01-01

    Know What to Expect When Managing Medical Equipment and Healthcare Technology in Your Organization As medical technology in clinical care becomes more complex, clinical professionals and support staff must know how to keep patients safe and equipment working in the clinical environment. Accessible to all healthcare professionals and managers, Medical Equipment Management presents an integrated approach to managing medical equipment in healthcare organizations. The book explains the underlying principles and requirements and raises awareness of what needs to be done and what questions to ask. I

  5. Master Minimum Equipment List

    Data.gov (United States)

    Department of Transportation — The AEG System is used to create, revise, approve, and distribute text of the MMEL and Flight Standard Board (FSB)/Type Rating Report. The MMEL specifies under what...

  6. FWS Approved Acquisition Boundaries

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This data layer depicts the external boundaries of lands and waters that are approved for acquisition by the U.S. Fish and Wildlife Service (USFWS) in North America,...

  7. FWS Approved Acquisition Boundaries

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This data layer depicts the external boundaries of lands and waters that are approved for acquisition by the U.S. Fish and Wildlife Service (USFWS) in North...

  8. FWS Approved Acquisition Boundaries

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This data layer depicts the external boundaries of lands and waters that are approved for acquisition by the U.S. Fish and Wildlife Service (USFWS) in North America,...

  9. Drugs Approved for Leukemia

    Science.gov (United States)

    This page lists cancer drugs approved by the FDA for use in leukemia. The drug names link to NCI's Cancer Drug Information summaries. The list includes generic names, brand names, and common drug combinations, which are shown in capital letters.

  10. Drugs Approved for Retinoblastoma

    Science.gov (United States)

    This page lists cancer drugs approved by the Food and Drug Administration (FDA) for retinoblastoma. The list includes generic names and brand names. The drug names link to NCI’s Cancer Drug Information summaries.

  11. Drugs Approved for Neuroblastoma

    Science.gov (United States)

    This page lists cancer drugs approved by the Food and Drug Administration (FDA) for neuroblastoma. The list includes generic names and brand names. The drug names link to NCI's Cancer Drug Information summaries.

  12. Premarket Approvals (PMA)

    Data.gov (United States)

    U.S. Department of Health & Human Services — Premarket approval by FDA is the required process of scientific review to ensure the safety and effectiveness of all devices classified as Class III devices. An...

  13. Premarket Approvals (PMA)

    Data.gov (United States)

    U.S. Department of Health & Human Services — Premarket approval by FDA is the required process of scientific review to ensure the safety and effectiveness of all devices classified as Class III devices. An...

  14. Technology Equipment Rooms.

    Science.gov (United States)

    Day, C. William

    2001-01-01

    Examines telecommunications equipment room design features that allow for growth and can accommodate numerous equipment replacements and upgrades with minimal service disruption and with minimal cost. Considerations involving the central hub, power and lighting needs, air conditioning, and fire protection are discussed. (GR)

  15. Face-Lift

    Science.gov (United States)

    Tests and Procedures Face-lift By Mayo Clinic Staff A face-lift (rhytidectomy) is a cosmetic surgical procedure to improve the look of your face and neck. During a face-lift, facial soft tissues are lifted, excess skin is ...

  16. 75 FR 44047 - Notice of Passenger Facility Charge (PFC) Approvals and Disapprovals

    Science.gov (United States)

    2010-07-27

    ... of Sec. 158.29. PFC Applications Approved Public Agency: County and City of Spokane, Washington...--runway plow. Airfield friction tester. Snow removal equipment--airfield snow blower. PFC application...

  17. 78 FR 76389 - Notice of Passenger Facility Charge (PFC) Approvals and Disapprovals

    Science.gov (United States)

    2013-12-17

    ...--design. Master plan update completion/airport geographic information system. Brief Description of Project... Federal Aviation Administration Notice of Passenger Facility Charge (PFC) Approvals and Disapprovals...). Construction of snow removal equipment building (geothermal heat system). Hangar taxi lane improvements. Hangar...

  18. 48 CFR 252.227-7024 - Notice and approval of restricted designs.

    Science.gov (United States)

    2010-10-01

    ... structures, machines, products, materials, construction methods, and equipment that are readily available through Government or competitive commercial channels, or through standard or proven production techniques, methods, and processes. Unless approved by the Contracting Officer, the Contractor shall not produce...

  19. 75 FR 54806 - Approval and Promulgation of Implementation Plans-Maricopa County (Phoenix) PM-10 Nonattainment...

    Science.gov (United States)

    2010-09-09

    ... generated during active agricultural operations is due to disturbance from parts of agricultural equipment... enforceability and SIP relaxations. Therefore, we are proposing to fully approve under CAA section 110(k)(3) the...

  20. 46 CFR 180.175 - Survival craft equipment.

    Science.gov (United States)

    2010-10-01

    ... on its container: (1) Safety of Life at Sea (SOLAS) B Pack; or (2) SOLAS A Pack. (c) Inflatable...'s approved servicing manual. (d) Life floats. Each life float must be fitted with a lifeline... with a lifeline, pendants, a painter, and a light. (f) Equipment specifications for life floats...

  1. 45 CFR 95.611 - Prior approval conditions.

    Science.gov (United States)

    2010-10-01

    ...) Automatic Data Processing Equipment and Services-Conditions for Federal Financial Participation (FFP... of procurement activities beyond that approved in the APD; (D) A change in system concept, or a... Management Information System (FAMIS)-type projects, in accordance with section 402(e)(2)(C) of the Social...

  2. 7 CFR 987.157 - Approved date product manufacturers.

    Science.gov (United States)

    2010-01-01

    ... product manufacturer: Each applicant is subject to an inspection of his/her manufacturing plant to verify that proper equipment to convert dates into products is in place and that the plant meets appropriate... furnished or its own investigation, and may revoke any approval for cause. The name and address of all...

  3. 7 CFR 1436.9 - Loan amount and loan application approvals.

    Science.gov (United States)

    2010-01-01

    ... fees, except for filing fees; environmental and historic review fees including archaeological study... wiring; electrical motors; off-farm paid labor; on-farm site preparation and construction equipment costs... facility loans, the agency approval officials may only approve loans, subject to available funds....

  4. OR fire virtual training simulator: design and face validity.

    Science.gov (United States)

    Dorozhkin, Denis; Olasky, Jaisa; Jones, Daniel B; Schwaitzberg, Steven D; Jones, Stephanie B; Cao, Caroline G L; Molina, Marcos; Henriques, Steven; Wang, Jinling; Flinn, Jeff; De, Suvranu

    2016-12-30

    The Virtual Electrosurgical Skill Trainer is a tool for training surgeons the safe operation of electrosurgery tools in both open and minimally invasive surgery. This training includes a dedicated team-training module that focuses on operating room (OR) fire prevention and response. The module was developed to allow trainees, practicing surgeons, anesthesiologist, and nurses to interact with a virtual OR environment, which includes anesthesia apparatus, electrosurgical equipment, a virtual patient, and a fire extinguisher. Wearing a head-mounted display, participants must correctly identify the "fire triangle" elements and then successfully contain an OR fire. Within these virtual reality scenarios, trainees learn to react appropriately to the simulated emergency. A study targeted at establishing the face validity of the virtual OR fire simulator was undertaken at the 2015 Society of American Gastrointestinal and Endoscopic Surgeons conference. Forty-nine subjects with varying experience participated in this Institutional Review Board-approved study. The subjects were asked to complete the OR fire training/prevention sequence in the VEST simulator. Subjects were then asked to answer a subjective preference questionnaire consisting of sixteen questions, focused on the usefulness and fidelity of the simulator. On a 5-point scale, 12 of 13 questions were rated at a mean of 3 or greater (92%). Five questions were rated above 4 (38%), particularly those focusing on the simulator effectiveness and its usefulness in OR fire safety training. A total of 33 of the 49 participants (67%) chose the virtual OR fire trainer over the traditional training methods such as a textbook or an animal model. Training for OR fire emergencies in fully immersive VR environments, such as the VEST trainer, may be the ideal training modality. The face validity of the OR fire training module of the VEST simulator was successfully established on many aspects of the simulation.

  5. Electronic equipment packaging technology

    CERN Document Server

    Ginsberg, Gerald L

    1992-01-01

    The last twenty years have seen major advances in the electronics industry. Perhaps the most significant aspect of these advances has been the significant role that electronic equipment plays in almost all product markets. Even though electronic equipment is used in a broad base of applications, many future applications have yet to be conceived. This versatility of electron­ ics has been brought about primarily by the significant advances that have been made in integrated circuit technology. The electronic product user is rarely aware of the integrated circuits within the equipment. However, the user is often very aware of the size, weight, mod­ ularity, maintainability, aesthetics, and human interface features of the product. In fact, these are aspects of the products that often are instrumental in deter­ mining its success or failure in the marketplace. Optimizing these and other product features is the primary role of Electronic Equipment Packaging Technology. As the electronics industry continues to pr...

  6. Reliable Electronic Equipment

    Directory of Open Access Journals (Sweden)

    N. A. Nayak

    1960-05-01

    Full Text Available The reliability aspect of electronic equipment's is discussed. To obtain optimum results, close cooperation between the components engineer, the design engineer and the production engineer is suggested.

  7. Cooling of electronic equipment

    DEFF Research Database (Denmark)

    A. Kristensen, Anders Schmidt

    2003-01-01

    Cooling of electronic equipment is studied. The design size of electronic equipment decrease causing the thermal density to increase. This affect the cooling which can cause for example failures of critical components due to overheating or thermal induced stresses. Initially a pin fin heat sink...... is considered as extruded profiles are inadequate for compact designs. An optimal pin fin shape and configuration is sought also taking manufacturing costs into consideration. Standard methods for geometrical modeling and thermal analysis are applied....

  8. Quarry Equipment Yearbook 2003

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    This issue of the journal is devoted to an annual review of developments in the equipment used for minerals extraction and recycling. For each of 12 types of equipment, an editorial review is presented of developments and a tabular presentation of suppliers' ranges and contact information, including e-mail addresses and websites. The sections are: asphalt plants, conveyors, crushers and screens, drill rigs, dump trucks, excavators, hammers, pumps, tyres, weighbridges, wheel loaders and wheel washers.

  9. Pembrolizumab: first global approval.

    Science.gov (United States)

    Poole, Raewyn M

    2014-10-01

    Pembrolizumab [Keytruda(®) (US)], a humanized monoclonal antibody against the programmed death receptor-1 (PD-1) protein, has been developed by Merck & Co for the treatment of cancer. Pembrolizumab has received its first global approval for the treatment of advanced, unresectable or metastatic malignant melanoma in the US, for use in patients with disease progression after prior treatment with ipilimumab and, for BRAF V600 mutation-positive patients, a BRAF inhibitor. It is the first anti-PD-1 therapy to receive regulatory approval in the US, and is currently under regulatory review in the EU. This article summarizes the milestones in the development of pembrolizumab leading to this first approval for the treatment of malignant melanoma.

  10. Pomalidomide: first global approval.

    Science.gov (United States)

    Elkinson, Shelley; McCormack, Paul L

    2013-05-01

    Pomalidomide (Pomalyst(®)) is a small molecule analogue of thalidomide under development with Celgene Corporation for the oral treatment of haematological and connective tissue diseases. Pomalidomide has been approved in the USA and is awaiting approval in the EU for use with low-dose dexamethasone for the treatment of relapsed and refractory multiple myeloma that has progressed following at least two prior therapies, including lenalidomide and bortezomib. The efficacy and safety of pomalidomide as monotherapy in patients with relapsed and refractory multiple myeloma has also been evaluated in a phase III trial. The agent is in phase III clinical development for the treatment of myelofibrosis and in phase II development for systemic sclerosis. Pomalidomide is also being investigated in patients with amyloidosis, prostate cancer, small cell lung cancer, pancreatic cancer, graft-versus-host disease, and Waldenstrom's macroglobulinaemia. This article summarizes the milestones in the development of pomalidomide leading to this first global approval for relapsed and refractory multiple myeloma.

  11. Apremilast: first global approval.

    Science.gov (United States)

    Poole, Raewyn M; Ballantyne, Anita D

    2014-05-01

    Apremilast (Otezla(®)), an oral small molecule inhibitor of type-4 cyclic nucleotide phosphodiesterase (PDE-4), is under development with Celgene Corporation for the treatment of psoriatic arthritis, psoriasis, ankylosing spondylitis, Behçet's syndrome, atopic dermatitis, and rheumatoid arthritis. Apremilast is indicated for the treatment of active psoriatic arthritis in adults. Apremilast has received its first global approval for this indication in the USA. Regulatory submissions for approval in this indication are under review in Canada and Europe. Regulatory filings have also been submitted for apremilast in the treatment of plaque psoriasis in the USA and Europe. This article summarizes the milestones in the development of apremilast leading to its first approval for the treatment of psoriatic arthritis.

  12. Toward a Social Psychophysics of Face Communication.

    Science.gov (United States)

    Jack, Rachael E; Schyns, Philippe G

    2017-01-03

    As a highly social species, humans are equipped with a powerful tool for social communication-the face. Although seemingly simple, the human face can elicit multiple social perceptions due to the rich variations of its movements, morphology, and complexion. Consequently, identifying precisely what face information elicits different social perceptions is a complex empirical challenge that has largely remained beyond the reach of traditional methods. In the past decade, the emerging field of social psychophysics has developed new methods to address this challenge, with the potential to transfer psychophysical laws of social perception to the digital economy via avatars and social robots. At this exciting juncture, it is timely to review these new methodological developments. In this article, we introduce and review the foundational methodological developments of social psychophysics, present work done in the past decade that has advanced understanding of the face as a tool for social communication, and discuss the major challenges that lie ahead.

  13. About (above) a face - a face

    OpenAIRE

    2009-01-01

    This text intents to unfold some considerations regardind the perception of the image of the Lóri’s face, from the book Uma aprendizagem ou o livro dos prazeres, published by Clarice Lispector in 1969. For that, will be studied the politicians devices who involve the apprehension of the face as a qualifying of the subject and, at the same time, its relation with the lenguage.

  14. About (above a face - a face

    Directory of Open Access Journals (Sweden)

    Diego Cervelin

    2009-07-01

    Full Text Available This text intents to unfold some considerations regardind the perception of the image of the Lóri’s face, from the book Uma aprendizagem ou o livro dos prazeres, published by Clarice Lispector in 1969. For that, will be studied the politicians devices who involve the apprehension of the face as a qualifying of the subject and, at the same time, its relation with the lenguage.

  15. Equipment for Topographical Preparation and Analysis of Various Semiconductor Infrared Detector Samples

    Science.gov (United States)

    2015-11-13

    Approved for Public Release; Distribution Unlimited Final Report: Equipment for Topographical Preparation and Analysis of Various Semiconductor Infrared...Final Report: Equipment for Topographical Preparation and Analysis of Various Semiconductor Infrared Detector Samples Report Title A used calibrated...camera will reinitialize and the video settings have to be reset. 6 Figure 4. This will open the both video overlay and the Dektak

  16. 77 FR 17099 - Proposed Extension of Existing Information Collection; Diesel-Powered Equipment for Underground...

    Science.gov (United States)

    2012-03-23

    ... Equipment for Underground Coal Mines AGENCY: Mine Safety and Health Administration, Labor. ACTION: Request...-Powered Equipment in Underground Coal Mines. OMB last approved this information collection request (ICR... Administration (MSHA) requires mine operators to provide important safety protections to underground coal miners...

  17. 76 FR 62961 - Lifesaving Equipment: Production Testing and Harmonization With International Standards

    Science.gov (United States)

    2011-10-11

    ... appropriate designation of type 302 steel. 5. Clarifying Action of Independent Laboratories In response to a... the type of equipment under consideration, and independent laboratories already involved in inspection... accepting specific independent laboratories for approval of specific types of equipment. The Coast Guard...

  18. Heartland Winthrop Approval

    Science.gov (United States)

    This May 19, 2016 letter from EPA approves the petition from Heartland Corn Products regarding non-grandfathered ethanol produced through a dry mill process, qualifying under the Clean Air Act for renewable fuel (D-code 6) RINs under the RFS program.

  19. Poet Lake Crystal Approval

    Science.gov (United States)

    This September 19, 2016 letter from EPA approves the petition from Poet Biorefining-Lake Crystal, regarding non-grandfathered ethanol produced through a dry mill process, qualifying under the Clean Air Act for renewable fuel (D-code 6) RINs under the RFS

  20. FDA Approval for Imiquimod

    Science.gov (United States)

    On July 15, 2004, the U.S. Food and Drug Administration (FDA) announced the approval of a new indication for Aldara® (imiquimod) topical cream for the treatment of superficial basal cell carcinoma (sBCC), a type of skin cancer.

  1. FHR Iowa Falls Approval

    Science.gov (United States)

    This October 22, 2015, letter from EPA approves the petition from Flint Hills Resources, LLC, regarding non-grandfathered ethanol produced through the FHR Iowa Falls Process, qualifying under the Clean Air Act for renewable fuel (D-code 6) RINs under the R

  2. The composite face illusion.

    Science.gov (United States)

    Murphy, Jennifer; Gray, Katie L H; Cook, Richard

    2017-04-01

    Few findings in cognitive science have proved as influential as the composite face effect. When the top half of one face is aligned with the bottom half of another, and presented upright, the resulting composite arrangement induces a compelling percept of a novel facial configuration. Findings obtained using composite face procedures have contributed significantly to our understanding of holistic face processing, the detrimental effects of face inversion, the development of face perception, and aberrant face perception in clinical populations. Composite paradigms continue to advance our knowledge of face perception, as exemplified by their recent use for investigating the perceptual mechanisms underlying dynamic face processing. However, the paradigm has been the subject of intense scrutiny, particularly over the last decade, and there is a growing sense that the composite face illusion, whilst easy to illustrate, is deceptively difficult to measure and interpret. In this review, we provide a focussed overview of the existing composite face literature, and identify six priorities for future research. Addressing these gaps in our knowledge will aid the evaluation and refinement of theoretical accounts of the illusion.

  3. Equipment Operational Requirements

    Energy Technology Data Exchange (ETDEWEB)

    Greenwalt, B; Henderer, B; Hibbard, W; Mercer, M

    2009-06-11

    The Iraq Department of Border Enforcement is rich in personnel, but poor in equipment. An effective border control system must include detection, discrimination, decision, tracking and interdiction, capture, identification, and disposition. An equipment solution that addresses only a part of this will not succeed, likewise equipment by itself is not the answer without considering the personnel and how they would employ the equipment. The solution should take advantage of the existing in-place system and address all of the critical functions. The solutions are envisioned as being implemented in a phased manner, where Solution 1 is followed by Solution 2 and eventually by Solution 3. This allows adequate time for training and gaining operational experience for successively more complex equipment. Detailed descriptions of the components follow the solution descriptions. Solution 1 - This solution is based on changes to CONOPs, and does not have a technology component. It consists of observers at the forts and annexes, forward patrols along the swamp edge, in depth patrols approximately 10 kilometers inland from the swamp, and checkpoints on major roads. Solution 2 - This solution adds a ground sensor array to the Solution 1 system. Solution 3 - This solution is based around installing a radar/video camera system on each fort. It employs the CONOPS from Solution 1, but uses minimal ground sensors deployed only in areas with poor radar/video camera coverage (such as canals and streams shielded by vegetation), or by roads covered by radar but outside the range of the radar associated cameras. This document provides broad operational requirements for major equipment components along with sufficient operational details to allow the technical community to identify potential hardware candidates. Continuing analysis will develop quantities required and more detailed tactics, techniques, and procedures.

  4. FDA Approvals - Cancer Currents Blog

    Science.gov (United States)

    A catalog of posts from NCI’s Cancer Currents blog on new Food and Drug Administration approvals of cancer drugs. All posts include summaries of the evidence to support the new approvals and what they mean for patients.

  5. Drugs Approved for Skin Cancer

    Science.gov (United States)

    ... Ask about Your Treatment Research Drugs Approved for Skin Cancer This page lists cancer drugs approved by the Food and Drug Administration (FDA) for skin cancer, including drugs for basal cell carcinoma, melanoma, and ...

  6. Developing and Studying the Methods of Hard-Facing with Heat-Resisting High-Hardness Steels

    Science.gov (United States)

    Malushin, N. N.; Kovalev, A. P.; Valuev, D. V.; Shats, E. A.; Borovikov, I. F.

    2016-08-01

    The authors develop the methods of hard-facing of mining-metallurgic equipment parts with heat-resisting high-hardness steels on the base of plasma-jet hard-facing in the shielding-alloying nitrogen atmosphere.

  7. Dairy Equipment Lubrication

    Science.gov (United States)

    1978-01-01

    Lake To Lake Dairy Cooperative, Manitowoc, Wisconsin, operates four plants in Wisconsin for processing milk, butter and cheese products from its 1,300 member farms. The large co-op was able to realize substantial savings by using NASA information for improved efficiency in plant maintenance. Under contract to Marshall Space Flight Center, Midwest Research Institute compiled a handbook consolidating information about commercially available lubricants. The handbook details chemical and physical properties, applications, specifications, test procedures and test data for liquid and solid lubricants. Lake To Lake's plant engineer used the handbook to effect savings in maintenance labor and materials costs by reducing the number of lubricants used on certain equipment. Strict U.S. Department of Agriculture and Food and Drug Administration regulations preclude lubrication changes n production equipment, but the co-op's maintenance chief was able to eliminate seven types of lubricants for ancillary equipment, such as compressors and high pressure pumps. Handbook data enabled him to select comparable but les expensive lubricants in the materials consolidation process, and simplified lubrication schedules and procedures. The handbook is in continuing use as a reference source when a new item of equipment is purchased.

  8. Education Demonstration Equipment

    Science.gov (United States)

    Nagy, A.; Lee, R. L.

    2003-10-01

    The General Atomics fusion education program ``Scientist in the Classroom" (SIC) now in its sixth year, uses scientists and engineers to present plasma as a state of matter to students in the classroom. Using hands-on equipment, students see how magnets, gas pressure changes, and different gases are turned into plasmas. A piston, sealed volume, and vacuum chamber illuminate ideal gas laws. Liquid nitrogen is used to explore thermodynamic temperature effects and changes in states of matter. Light bulbs are excited with a Tesla coil to ionize gases, thus becoming an inexpensive plasma devices and a plasma tube shows magnetic interactions with plasma. The demonstration equipment used in this program is built with simple designs and common commercial equipment keeping in mind a teacher's tight budget. The SIC program ( ˜25 school presentations per year) has become very popular and has acquired an enthusiastic group of regular teacher clientele requesting repeat visits. In addition, three very popular and successful ``Build-It" days, sponsored by the General Atomics Fusion Education Outreach Program, enables teachers to build and keep in their classroom some of this equipment. The demonstration devices will be presented along with their ``build-it" details.

  9. Shipboard and laboratory equipment

    Digital Repository Service at National Institute of Oceanography (India)

    Shyamprasad, M.; Ramaswamy, V.

    bed, and a digital clock and a transponder helped to locate the camera. Equipment for the analysis of the nodules such as x-ray fluorescence and atomic absorption spectrophotometers were installed aboard MV Skandi Surveyor and MV Fernella and MV G A...

  10. Lifetime of Mechanical Equipment

    Energy Technology Data Exchange (ETDEWEB)

    Leland, K.

    1999-07-01

    The gas plant at Kaarstoe was built as part of the Statpipe gas transport system and went on stream in 1985. In 1993 another line was routed from the Sleipner field to carry condensate, and the plant was extended accordingly. Today heavy additional supply- and export lines are under construction, and the plant is extended more than ever. The main role of the factory is to separate the raw gas into commercial products and to pump or ship it to the markets. The site covers a large number of well-known mechanical equipment. This presentation deals with piping, mechanical and structural disciplines. The lifetime of mechanical equipment is often difficult to predict as it depends on many factors, and the subject is complex. Mechanical equipment has been kept in-house, which provides detailed knowledge of the stages from a new to a 14 years old plant. The production regularity has always been very high, as required. The standard of the equipment is well kept, support systems are efficient, and human improvisation is extremely valuable.

  11. Pitolisant: First Global Approval.

    Science.gov (United States)

    Syed, Yahiya Y

    2016-09-01

    Pitolisant (Wakix™) is an inverse agonist of the histamine H3 receptor that is being developed by Bioproject. Oral pitolisant is approved in the EU for the treatment of narcolepsy with or without cataplexy in adults. Pitolisant has received a Temporary Authorization of Use in France for this indication in case of treatment failure, intolerance or contraindication to currently available treatment. Pitolisant has orphan drug designation in the EU and the USA. In the pivotal HARMONY I trial, pitolisant significantly decreased excessive daytime sleepiness versus placebo in adults with narcolepsy with or without cataplexy (primary endpoint). Pitolisant also significantly decreased cataplexy rate versus placebo in these patients. This article summarizes the milestones in the development of pitolisant leading to this first approval for narcolepsy.

  12. Linaclotide: first global approval.

    Science.gov (United States)

    McWilliams, Vanessa; Whiteside, Glenn; McKeage, Kate

    2012-11-12

    Linaclotide is a once-daily, orally administered, first-in-class agonist of guanylate cyclase-C that is minimally absorbed. It is being developed to treat gastrointestinal disorders by Ironwood Pharmaceuticals and its partners, Forest Laboratories (North America), Almirall (Europe) and Astellas Pharma (Asia-Pacific). Linaclotide has received its first global approval in the US for the treatment of constipation-predominant irritable bowel syndrome (IBS-C) and chronic idiopathic constipation (CIC), and a marketing submission has been filed in the EU for IBS-C. This article summarizes the milestones in the development of linaclotide leading to this first approval for IBS-C and CIC. This profile has been extracted and modified from the Adis R&D Insight drug pipeline database. Adis R&D Insight tracks drug development worldwide through the entire development process, from discovery, through pre-clinical and clinical studies to market launch.

  13. Rucaparib: First Global Approval.

    Science.gov (United States)

    Syed, Yahiya Y

    2017-04-01

    Rucaparib (Rubraca™) is an oral, small molecule, poly (ADP-ribose) polymerase inhibitor being developed by Clovis Oncology, Inc. (Boulder, CO, USA) for the treatment of solid tumours. It has been approved in the USA as monotherapy for the treatment of patients with deleterious BRCA mutation (germline and/or somatic) associated advanced ovarian cancer who have been treated with two or more chemotherapies. A marketing authorization application for rucaparib for the same indication has been submitted to the European Medicines Agency. Rucaparib is also under phase II or III investigation in ovarian, breast and prostate cancer. This article summarizes the milestones in the development of rucaparib leading to this first approval for ovarian cancer.

  14. Ipilimumab: first global approval.

    Science.gov (United States)

    Cameron, Fiona; Whiteside, Glenn; Perry, Caroline

    2011-05-28

    Ipilimumab (Yervoy®) is an anti-cytotoxic T-lymphocyte antigen (CTLA)-4 monoclonal antibody that has been approved in the US for the first- or second-line treatment of patients with malignant melanoma. In the EU, it is awaiting approval as second-line therapy for melanoma. Ipilimumab blocks the effects of the negative T-cell regulator CTLA-4, which may in turn augment T-cell responses to tumour cells. Preclinical studies have indicated that antibody blocking of CTLA-4 can lead to potent immune responses. Ipilimumab is also in development as first- and second-line therapy for prostate cancer where it has progressed to phase III clinical trials worldwide, and it is in phase II development for non-small cell lung cancer. Ipilimumab was originated by the University of California, Berkeley, in the US and subsequently licensed to Medarex, which was later acquired by Bristol-Myers Squibb. This article summarizes the milestones in the development of intravenous ipilimumab leading to this first approval. This profile has been extracted from Wolters Kluwer's R&D Insight drug pipeline database. R&D Insight tracks drug development worldwide through the entire development process, from discovery, through pre-clinical and clinical studies to market launch.

  15. Baricitinib: First Global Approval.

    Science.gov (United States)

    Markham, Anthony

    2017-03-13

    Baricitinib (Olumiant™) is an orally-administered, small-molecule, janus-associated kinase (JAK) inhibitor developed by Eli Lilly and Incyte Corporation for the treatment of rheumatoid arthritis (RA), atopic dermatitis and systemic lupus erythematosus. JAKs transduce intracellular signals from cell surface receptors for various cytokines and growth factors involved in inflammation and immune function, suggesting JAK inhibitors may be of therapeutic benefit in inflammatory conditions. In February 2017, baricitinib was approved in the EU, as monotherapy or in combination with methotrexate, for the treatment of moderate to severe active rheumatoid arthritis in adult patients who have responded inadequately to, or who are intolerant to one or more disease-modifying anti-rheumatic drugs (DMARDs). Regulatory approval to market baricitinib as a treatment for RA has also been sought in the USA and Japan. This article summarizes the milestones in the development of baricitinib leading to this first global approval for the treatment for moderate to severe active RA in adult patients who have responded inadequately to, or are intolerant to one or more DMARDs.

  16. Evolocumab: First Global Approval.

    Science.gov (United States)

    Markham, Anthony

    2015-09-01

    Evolocumab (Repatha™) is a fully human monoclonal antibody developed by Amgen that has been approved as a treatment for hypercholesterolaemia in the EU, and is awaiting approval in the USA and Japan. It specifically binds proprotein convertase subtilisin/kexin type 9 (PCSK9)-a negative regulator of low-density lipoprotein (LDL)-receptors-thereby improving the ability of the liver to bind LDL-cholesterol (LDL-C), leading to reduced LDL-C blood levels. The drug reduces LDL-C levels in patients with hypercholesterolaemia when used as monotherapy or in conjunction with a statin. This article summarizes the milestones in the development of evolocumab leading to this approval for the treatment of adults with primary hypercholesterolaemia (heterozygous familial and non-familial) or mixed dyslipidaemia as an adjunct to diet with or without a statin and/or other lipid lowering therapies, and in adults and adolescents aged ≥12 years with homozygous familial hypercholesterolaemia in combination with other lipid lowering therapies.

  17. Oracle ADF Faces cookbook

    CERN Document Server

    Gawish, Amr

    2014-01-01

    This is a cookbook that covers more than 80 different recipes to teach you about different aspects of Oracle ADF Faces. It follows a practical approach and covers how to build your components for reuse in different applications. This book will also help you in tuning the performance of your ADF Faces application. If you are an ADF developer who wants to harness the power of Oracle ADF Faces to create exceptional user interfaces and reactive applications, this book will provide you with the recipes needed to do just that. You will not need to be familiar with Oracle ADF Faces, but you should be

  18. Generalization of affective learning about faces to perceptually similar faces.

    Science.gov (United States)

    Verosky, Sara C; Todorov, Alexander

    2010-06-01

    Different individuals have different (and different-looking) significant others, friends, and foes. The objective of this study was to investigate whether these social face environments can shape individual face preferences. First, participants learned to associate faces with positive, neutral, or negative behaviors. Then, they evaluated morphs combining novel faces with the learned faces. The morphs (65% and 80% novel faces) were within the categorical boundary of the novel faces: They were perceived as those faces in a preliminary study. Moreover, a second preliminary study showed that following the learning, the morphs' categorization as similar to the learned faces was indistinguishable from the categorization of actual novel faces. Nevertheless, in the main experiment, participants evaluated morphs of "positive" faces more positively than morphs of "negative" faces. This learning generalization effect increased as a function of the similarity of the novel faces to the learned faces. The findings suggest that general learning mechanisms based on similarity can account for idiosyncratic face preferences.

  19. Is Mexico Ready for Face Transplantation?

    Science.gov (United States)

    Iglesias, M; Butrón, P; Osuna-Leal, A I; Abarca-Perez, L; Sosa-Ascencio, M J; Moran-Romero, M A; Cruz-Reyes, A U; Pineda-Gutierrez, F J; Leon-Lopez, D A; García-Alvarez, M N; Alberu, J; Vilatoba, M; Leal-Villalpando, R P; Zamudio-Bautista, J; Acosta-Nava, V M; Gonzalez, J

    2015-01-01

    With the limitations of surgical reconstructive procedures, the growing number of gunshot wounds, burns, and work accidents in Mexico that result in complex facial deformities leaves only 1 option-face transplantation. The National Institute of Medical Sciences and Nutrition "Salvador Zubiran" (INCMNSZ) has performed transplants since 1971. We at INCMNSZ undertook the 1st bilateral upper-limb transplantation in Latin America in 2012. We are willing to continue in this manner toward conducting face transplantation at our institute. To this end, we identified and solved various challenges. The 1st challenge was acceptance and inclusion of vascularized composite allotransplantation (VCA) within general Mexican health law and approval of the face transplantation procedure. Subsequently, the health ministry provided a license to INCMNSZ to perform the procedure. The 2nd challenge concerned who would pay for the procedure. The costs will be paid by the patient (1st-party payer), social security institutions (2nd-party payers), and the health ministry (3rd-party payer). The 3rd challenge was to maintain ongoing surgical training of the team using cadavers. The fourth challenge was to locate donors; toward this end, we developed a campaign for promoting face donation in social media, making a comic book, and training organ and tissue coordinators to further VCA. Thus, INCMNSZ has the legal, administrative, medical, and surgical wherewithal to accomplish face transplantation.

  20. MODERNIZATION OF CUPOLA EQUIPMENT

    Directory of Open Access Journals (Sweden)

    S. L. Rovin

    2015-01-01

    Full Text Available This article presents an automated cupola complex, developed by scientific-production enterprise «Technolit» together with GSTU named after P. O. Sukhoi, launched in the spring of 2015 at the plant «Stroiex» in the city of Chelyabinsk (the Russian Federation. The old cupolas (open type have been replaced by the new cupolas of the closed type, equipped with automatic control and management system and multistage wet gas treatment system. Cupolas are equipped with systems of post-combustion gases and the batch charging, the separate systems of air blast, systems of sludge removal and recirculation of water, the slag granulation installations, mechanized cleaning of cupola furnace and automatic safety system. These activities allowed the company to increase production and improve the quality of cast iron, reduce the coke consumption by 20% and reducing emissions of pollutants into the atmosphere almost 30 times.

  1. Soviet equipment flies in

    CERN Multimedia

    CERN PhotoLab

    1978-01-01

    End of February 1977 a Soviet Ilyushin-76 heavy freight aircraft landed at Cointrin airport having on board fifty large wire proprtional chambers and associated apparatus, together weighing 10 tons, supplied by the Joint Institute for Nuclear Research, Dubna, USSR. The equipment was for the CERN- Dubna-Munich-Saclay experiment NA4 on deep inelastic muon scattering being set up in the North Area of SPS. See Weekly Bulletin 11/78.

  2. Equipment for gas conversion

    Energy Technology Data Exchange (ETDEWEB)

    Tabata, K.; Matsumoto, I.

    1983-01-28

    Equipment is proposed for vapor conversion of hydrocarbons (Uv), possibly in a mixture with air, in order to produce an inorganic gas, which chiefly consists of H2 and COx. It consists of a reaction pipe made of an inorganic refractory ceramic and equipped along the wall circumference with heaters. The reaction pipe is filled with a combined, multilayer catalyst (Kt) carrier, made of gamma-A1203 which in the transverse cross section has a multipore reticular or fibrous structure. Replacement of the traditional steel (St) materials for the walls of the reaction pipe with ceramic materials reduces the output of the hydrocarbon which contaminates the surface (Pv) of the catalyst; the use of a multilayer carrier for the catalyst made of gamma-A1203 with a porous reticular or fibrous structure reduces the pressure losses in the reactor and facilitates the replacement of the spent catalyst. The equipment is designed for vapor conversion of natural gas, C3H8, and vapors of kerosene, naphtha and so on.

  3. Social judgments from faces.

    Science.gov (United States)

    Todorov, Alexander; Mende-Siedlecki, Peter; Dotsch, Ron

    2013-06-01

    People make rapid and consequential social judgments from minimal (non-emotional) facial cues. There has been rapid progress in identifying the perceptual basis of these judgments using data-driven, computational models. In contrast, our understanding of the neural underpinnings of these judgments is rather limited. Meta-analyses of neuroimaging studies find a wide range of seemingly inconsistent responses in the amygdala that co-vary with social judgments from faces. Guided by computational models of social judgments, these responses can be accounted by positing that the amygdala (and posterior face selective regions) tracks face typicality. Atypical faces, whether positively or negatively evaluated, elicit stronger responses in the amygdala. We conclude with the promise of data-driven methods for modeling neural responses to social judgments from faces.

  4. 30 CFR 18.11 - Approval plate.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Approval plate. 18.11 Section 18.11 Mineral... plate. (a)(1) The notice of approval will be accompanied by a photograph of an approval plate, bearing... number shall be added to the original approval number on the approval plate. (Example: Original approval...

  5. Ataluren: first global approval.

    Science.gov (United States)

    Ryan, Nicola J

    2014-09-01

    Nonsense mutations are implicated in 5-70 % of individual cases of most inherited diseases, including Duchenne muscular dystrophy (DMD) and cystic fibrosis. Ataluren (Translarna™) is an orally available, small molecule compound that targets nonsense mutations, and is the first drug in its class. Ataluren appears to allow cellular machinery to read through premature stop codons in mRNA, enabling the translation process to produce full-length, functional proteins. This article summarizes the milestones in the development of ataluren leading to its conditional first approval for nonsense mutation DMD.

  6. Obinutuzumab: first global approval.

    Science.gov (United States)

    Cameron, Fiona; McCormack, Paul L

    2014-01-01

    Obinutuzumab (Gazyva™) is an intravenously administered, humanized and glycoengineered, type II anti-CD20 monoclonal antibody for the treatment of B-cell malignancies. It is approved in the US for use in combination with chlorambucil for the first-line treatment of chronic lymphocytic leukaemia (CLL), and has been filed for approval in the EU in this indication. The antibody is based on GlycArt Biotechnology's (later Roche Glycart AG) proprietary GlycoMAb® technology, which uses glycoengineered antibodies that specifically increase antibody-dependent cellular cytotoxicity and thereby increase immune-mediated target cell death. Obinutuzumab is a type II anti-CD20 antibody that induces enhanced direct cell death. The monoclonal antibody is in worldwide phase III development with Roche and its subsidiaries, Genentech and Chugai Pharmaceutical, as well as Biogen Idec, for diffuse large B-cell lymphoma and non-Hodgkin's lymphoma generally, and is also in phase III development in countries outside of the US and EU for CLL.

  7. Safinamide: first global approval.

    Science.gov (United States)

    Deeks, Emma D

    2015-04-01

    Safinamide (Xadago(®)) is an oral α-aminoamide derivative developed by Newron for the treatment of Parkinson's disease (PD). The drug has both dopaminergic properties (highly selective and reversible inhibition of monoamine oxidase-B) and non-dopaminergic properties (selective sodium channel blockade and calcium channel modulation, with consequent inhibition of excessive glutamate release). Safinamide is approved in the EU, Iceland, Lichtenstein and Norway, as an add-on therapy to stable-dose levodopa, alone or in combination with other PD therapies in mid- to late-stage fluctuating PD patients; regulatory submissions have also been filed in the USA and Switzerland for its use in this indication. Additional submissions have been made in the USA, Iceland, Lichtenstein, Norway and Switzerland for early-stage PD. Safinamide has also undergone phase II investigation in PD patients with drug-induced dyskinesia (France, Germany, Austria, Canada and South Africa) or cognitive impairment (USA and Spain). This article summarizes the milestones in the development of safinamide leading to its first approval for PD.

  8. Handbook of Face Recognition

    CERN Document Server

    Li, Stan Z

    2011-01-01

    This highly anticipated new edition provides a comprehensive account of face recognition research and technology, spanning the full range of topics needed for designing operational face recognition systems. After a thorough introductory chapter, each of the following chapters focus on a specific topic, reviewing background information, up-to-date techniques, and recent results, as well as offering challenges and future directions. Features: fully updated, revised and expanded, covering the entire spectrum of concepts, methods, and algorithms for automated face detection and recognition systems

  9. Face Search at Scale.

    Science.gov (United States)

    Wang, Dayong; Otto, Charles; Jain, Anil K

    2016-06-20

    rsons of interest among the billions of shared photos on these websites. Despite significant progress in face recognition, searching a large collection of unconstrained face images remains a difficult problem. To address this challenge, we propose a face search system which combines a fast search procedure, coupled with a state-of-the-art commercial off the shelf (COTS) matcher, in a cascaded framework. Given a probe face, we first filter the large gallery of photos to find the top-k most similar faces using features learned by a convolutional neural network. The k retrieved candidates are re-ranked by combining similarities based on deep features and those output by the COTS matcher. We evaluate the proposed face search system on a gallery containing 80 million web-downloaded face images. Experimental results demonstrate that while the deep features perform worse than the COTS matcher on a mugshot dataset (93.7% vs. 98.6% TAR@FAR of 0.01%), fusing the deep features with the COTS matcher improves the overall performance (99.5% TAR@FAR of 0.01%). This shows that the learned deep features provide complementary information over representations used in state-of-the-art face matchers. On the unconstrained face image benchmarks, the performance of the learned deep features is competitive with reported accuracies. LFW database: 98.20% accuracy under the standard protocol and 88.03% TAR@FAR of 0.1% under the BLUFR protocol; IJB-A benchmark: 51.0% TAR@FAR of 0.1% (verification), rank 1 retrieval of 82.2% (closed-set search), 61.5% FNIR@FAR of 1% (open-set search). The proposed face search system offers an excellent trade-off between accuracy and scalability on galleries with millions of images. Additionally, in a face search experiment involving photos of the Tsarnaev brothers, convicted of the Boston Marathon bombing, the proposed cascade face search system could find the younger brother's (Dzhokhar Tsarnaev) photo at rank 1 in 1 second on a 5M gallery and at rank 8 in 7

  10. How to Use Equipment Therapeutically.

    Science.gov (United States)

    Bowne, Douglas

    1986-01-01

    Shares therapeutic and economic practices surrounding equipment used in New York's Higher Horizons adventure program of therapy for troubled youth. Encourages educators, therapists, and administrators to explore relationship between equipment selection, program goals, and clients. (NEC)

  11. Order of the 29. of January 2010 approving the decision n. 2009-DC-0146 made on the 16. of July 2010 by the Nuclear Safety Authority (ASN), modified by the decision n. 2009-DC-0162 of the 20. of October 2009, defining the list electric equipment generating X rays which are hold or used for purposes of biomedical research or medical, dental, forensics or veterinary diagnosis and submitted to a declaration regime on the account of the first paragraph of the article R. 1333-19 of the Public Health code and abrogating the 23 April 1969 order related to equipment and installations using ionizing radiations on medical purposes

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-07-01

    This legal document indicates the list of equipment which must now be declared to the ASN (the French Nuclear Safety Authority), specifies that any use of these equipment in conditions other than normal requires an authorization on the account of an article of the Public Health Code. A list of equipment is given which are used in medical and forensics radio-diagnosis, in biomedical research, in dental and veterinary radio-diagnosis

  12. NIH Standard. Animal Care Equipment.

    Science.gov (United States)

    National Institutes of Health (DHEW), Bethesda, MD. Office of Administrative Management.

    The National Institutes of Health standardized animal care equipment is presented in this catalog. Each piece of equipment is illustrated and described in terms of overall dimensions, construction, and general usage. A price list is included to estimate costs in budgeting, planning, and requisitioning animal care equipment. The standards and…

  13. Drugs Approved for Cervical Cancer

    Science.gov (United States)

    ... Human Papillomavirus (HPV) Nonavalent Vaccine Recombinant Human Papillomavirus (HPV) Quadrivalent Vaccine Drugs Approved to Treat Cervical Cancer Avastin (Bevacizumab) Bevacizumab Blenoxane (Bleomycin) Bleomycin Hycamtin (Topotecan ...

  14. Abyssal soil investigation equipment

    Energy Technology Data Exchange (ETDEWEB)

    Smits, F.P.; Maggioni, W.; Mainardi, U. [ISMES, Bergamo (Italy)

    1994-12-31

    The present paper deals with the development of a testing device for quick offshore geotechnical investigations. The equipment, at present, consists of a penetrometer, mounted on a sea bed platform, a handling frame and a control cabin; a further development includes a drill rig and a geotechnical laboratory. All this is designed so as to be an autonomous unit that can be handled by various types of non-specialized ships which have the necessary deck space. The sea bed platform can operate in 2,000 m of waterdepth and is provided with a hydraulic penetrometer, with a thrust capacity of 400 kN, able to carry out cone penetration type testing until a depth of more than 100 m, as well as shallow depth continuous sampling. The penetrometer can be equipped with a series of probes (piezocone, pressiocone, total radial pressure transducer, seismic cone) allowing the execution of the wide range of direct geotechnical measurements normally performed during on-land penetration tests.

  15. Comparison of face Recognition Algorithms on Dummy Faces

    Directory of Open Access Journals (Sweden)

    Aruni Singh

    2012-09-01

    Full Text Available In the age of rising crime face recognition is enormously important in the contexts of computer vision, psychology, surveillance, fraud detection, pattern recognition, neural network, content based video processing, etc. Face is a non intrusive strong biometrics for identification and hence criminals always try to hide their facial organs by different artificial means such as plastic surgery, disguise and dummy. The availability of a comprehensive face database is crucial to test the performance of these face recognition algorithms. However, while existing publicly-available face databases contain face images with a wide variety of poses, illumination, gestures and face occlusions but there is no dummy face database is available in public domain. The contributions of this research paper are: i Preparation of dummy face database of 110 subjects ii Comparison of some texture based, feature based and holistic face recognition algorithms on that dummy face database, iii Critical analysis of these types of algorithms on dummy face database.

  16. Remanufacturing strategy for chemical equipment

    Institute of Scientific and Technical Information of China (English)

    ZHANG Xian-cheng; XU Bin-shi; WANG Hai-dou; JIANG Yi; WU Yi-xiong; GONG Jian-ming; TU Shan-dong

    2005-01-01

    Failure, especially induced by cracks, usually occurred in the service process of chemical equipment, which could cause the medium leakage, fire hazard and explosion and induced the personnel casualty and economic losses. To assure the long-term and safety service, it is necessary to apply the remanufacturing technology on the chemical equipment containing cracks. The recent research advances on the remanufacturing, the failure modes and the life extension technology for chemical equipment were reviewed. The engineering strategy of the remanufacturing for the chemical equipment was proposed, which could provide a reasonable and reliable technical route for the remanufacturing operation of chemical equipment. In the strategy, the redesign was also been considered.

  17. Is Face Distinctiveness Gender Based?

    Science.gov (United States)

    Baudouin, Jean-Yves; Gallay, Mathieu

    2006-01-01

    Two experiments were carried out to study the role of gender category in evaluations of face distinctiveness. In Experiment 1, participants had to evaluate the distinctiveness and the femininity-masculinity of real or artificial composite faces. The composite faces were created by blending either faces of the same gender (sexed composite faces,…

  18. 14 CFR 129.14 - Maintenance program and minimum equipment list requirements for U.S.-registered aircraft.

    Science.gov (United States)

    2010-01-01

    ....S.-REGISTERED AIRCRAFT ENGAGED IN COMMON CARRIAGE General § 129.14 Maintenance program and minimum... maintenance program and approved aircraft minimum equipment list to the FAA office prescribed in paragraph (b... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Maintenance program and minimum equipment...

  19. HyApproval - Handbook for the approval of hydrogen refuelling stations - First preliminary achievements

    Energy Technology Data Exchange (ETDEWEB)

    Wurster, R.; Vandendungen, G.; Guichard, J.; Molag, M.; Barron, J.; Reijalt, M.; Hill, H.J.; Landinger, H.

    2007-05-15

    The EU-funded project HyApproval [www.hyapproval.org] aims at developing a universal Handbook to facilitate the approval process of Hydrogen Refuelling Stations (HRS) in Europe. The main goal of the HyApproval partnership with 22 partners from Europe and one each from China, Japan and the USA is to provide a Handbook of technical and regulatory requirements to assist authorisation officials, companies and organisations in the safe implementation and operation of HRS. Achievements during the first 15 months: analyses of HRS technology concepts and of equipment and safety distances/ Intermediate Design Paper/ Regulations, Codes and Standards (RCS) review and comparison/ first Handbook draft and first review sessions with HySafe experts/ safety matrix/ identification of accident scenarios/ agreement on safety documentation/ critical review of reliability data from collections and risk studies/ risk assessment (RA) criteria definition and RA/ matrix of acceptability and awareness levels/ database of Fire Associations and First Responders/ calendar of hydrogen events/ general description of CGH{sub 2} interfaces. (au)

  20. 30 CFR 75.1002 - Installation of electric equipment and conductors; permissibility.

    Science.gov (United States)

    2010-07-01

    ... conductors; permissibility. 75.1002 Section 75.1002 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION... Wires and Trolley Feeder Wires § 75.1002 Installation of electric equipment and conductors... equipment is located within 150 feet of pillar workings or longwall faces. (b) Electric conductors...

  1. Analysis on Technology Roadmap of Agricultural Equipment Industry in Chongqing

    Institute of Scientific and Technical Information of China (English)

    Chongjing; TAN; Jin; YE; Shi; YANG

    2014-01-01

    Since the subsidizing agricultural machine purchase was launched in 2004,the agriculture equipment industry in Chongqing has progressed by leaps and bounds,but it is still faced with a few urgent problems,which requires the coordination of stakeholders,with an aim to establish a clear direction of the development of industry and a technology route. With planting industry as an example,this paper applies the principle and method of industry technology roadmap to analyse the market demand,industry target,technology barrier and R & D demand of agricultural equipment industry in Chongqing. Based on the results,the top technology R & D items of agricultural equipment industry in Chongqing are obtained. Finally,the following suggestions are put forward: integrating resources,constructing platform and improving innovation ability; constructing agricultural industry park and promoting clustered development of agricultural equipment industry; strengthening finance and taxation support; strengthening construction of agricultural mechanization infrastructure; substantially developing socialized service of agricultural machinery.

  2. FDA-Approved HIV Medicines

    Science.gov (United States)

    HIV Treatment FDA-Approved HIV Medicines (Last updated 2/27/2017; last reviewed 2/27/2017) Treatment with HIV medicines is ... approved by the U.S. Food and Drug Administration (FDA) for the treatment of HIV infection in the ...

  3. Edge QoS study of RPR equipment

    Science.gov (United States)

    Wang, Xiaoling; Huang, Benxiong; Yu, Xin; Zhang, Fan

    2004-05-01

    The IEEE 802.17 Working Group has taken another step forward in providing standards to Resilient Packet Ring (RPR) architectures by approving draft 2.4 of the RPR standard. Some companies have already had their RPR equipments for good market perspectives before the final standardization of RPR specifications. These equipments can supply services such as Ethernet Private Line (EPL), Transparent LAN Service (TLS), Ethernet Line Aggregation (ELA) and so on. Quality of Service (QoS) is an important part implemented in these equipments. Only when there is promise of QoS for RPR equipment, can commercial clients put their key applications to its network. Both the edge and the ring of RPR equipment need take QoS into effect to get QoS guarantees. This paper mainly deals with edge QoS study of RPR equipment. Policing, classification, shaping, and scheduling that are used for edge QoS process are introduced in the paper. And a QoS process method for traffic across rings is discussed at the same time.

  4. Difficult airway equipment: a survey of standards across metropolitan Perth.

    Science.gov (United States)

    Alakeson, N; Flett, T; Hunt, V; Ramgolam, A; Reynolds, W; Hartley, K; Hegarty, M; von Ungern-Sternberg, B S

    2014-09-01

    The importance of appropriate equipment to manage the difficult airway has been highlighted by the publication of the Australian and New Zealand College of Anaesthetists (ANZCA) guidelines in 2012. We set out to audit compliance with these guidelines in all public and private sites providing general anaesthesia in metropolitan Perth. Public and private health care websites identified 39 sites of which 37 were studied. Institutional and ethics approval was obtained. A tick-box design audit tool, based on the ANZCA guidelines, was used to collect information regarding the dedicated difficult airway container (DDAC) at each site. As recommended in the guidelines, only equipment within the DDAC was considered. Further data about each site, including the number of theatre suites, satellite anaesthetic areas, use of capnography and categories of patients treated (adult, obstetric and paediatric) were collected. An adult DDAC was found at 92% of all sites, but none of the sites had all the essential equipment listed in the ANZCA guidelines. There was limited provision of adult difficult airway equipment within private sites compared to public, and less provision of paediatric difficult airway equipment across all sites treating paediatric patients in metropolitan Perth. Capnography was available in 76% of post anaesthesia care units and used regularly in 27%. Adherence to the ANZCA guidelines regarding the DDAC could be improved. Standardised equipment across a metropolitan region would be of value in the management of the difficult airway.

  5. Electronic Approval of Invoices (AEF)

    CERN Multimedia

    2004-01-01

    With a view to the simplification of administrative procedures, AS and FI Departments have completed the second phase of the new procedure for the electronic approval of invoices via the EDH application. The aim of this new procedure is to rationalise the invoice approval process, notably by eliminating paper copies from the approval circuit. This will simplify the processing of invoices and facilitate their timely settlement, while at the same time maintaining a high level of security. Phase II includes handling the electronic approval process of invoices whose amounts do not correspond exactly to those of the associated orders. In such cases, budgetary approval is required for the entire invoiced amount. Further information can be obtained at : http://ais.cern.ch/projs/AEF/help/F_help.htm Phase II of the procedure will be introduced gradually with effect from April 2004. Finance Department, Accounts Payable Section Tel: 72295 Organisation and Procedures Tel: 75885 Information Technologies Department,...

  6. Facing Aggression: Cues Differ for Female versus Male Faces

    Science.gov (United States)

    Geniole, Shawn N.; Keyes, Amanda E.; Mondloch, Catherine J.; Carré, Justin M.; McCormick, Cheryl M.

    2012-01-01

    The facial width-to-height ratio (face ratio), is a sexually dimorphic metric associated with actual aggression in men and with observers' judgements of aggression in male faces. Here, we sought to determine if observers' judgements of aggression were associated with the face ratio in female faces. In three studies, participants rated photographs of female and male faces on aggression, femininity, masculinity, attractiveness, and nurturing. In Studies 1 and 2, for female and male faces, judgements of aggression were associated with the face ratio even when other cues in the face related to masculinity were controlled statistically. Nevertheless, correlations between the face ratio and judgements of aggression were smaller for female than for male faces (F1,36 = 7.43, p = 0.01). In Study 1, there was no significant relationship between judgements of femininity and of aggression in female faces. In Study 2, the association between judgements of masculinity and aggression was weaker in female faces than for male faces in Study 1. The weaker association in female faces may be because aggression and masculinity are stereotypically male traits. Thus, in Study 3, observers rated faces on nurturing (a stereotypically female trait) and on femininity. Judgements of nurturing were associated with femininity (positively) and masculinity (negatively) ratings in both female and male faces. In summary, the perception of aggression differs in female versus male faces. The sex difference was not simply because aggression is a gendered construct; the relationships between masculinity/femininity and nurturing were similar for male and female faces even though nurturing is also a gendered construct. Masculinity and femininity ratings are not associated with aggression ratings nor with the face ratio for female faces. In contrast, all four variables are highly inter-correlated in male faces, likely because these cues in male faces serve as “honest signals”. PMID:22276184

  7. Trabalho em equipe e interdisciplinaridade: desafios para a efetivação da integralidade na assistência ambulatorial às pessoas vivendo com HIV/Aids em Pernambuco Team Work and Interdiciplinarity: Challenges facing the implementation of Comprehensive Outpatient Care for People with HIV/Aids in Pernambuco

    Directory of Open Access Journals (Sweden)

    Maria Jucineide Lopes Borges

    2012-01-01

    Full Text Available A complexidade da atenção à saúde das pessoas vivendo com HIV/Aids requer o investimento na integralidade das ações e do cuidado, lançando às equipes multiprofissionais o desafio da construção de uma prática interdisciplinar. Este estudo teve o objetivo de analisar a integralidade da atenção à saúde em Serviços de Assistência Especializada em HIV/Aids (SAE-HIV/Aids de Recife/Pernambuco, a partir do processo e organização do trabalho em equipe. Trata-se de um estudo de caso desenvolvido em três unidades de SAE-HIV/Aids, com base em abordagem qualitativa, por meio de diferentes técnicas de investigação. Os resultados apontam que os SAE atendem a grande parte das recomendações do Ministério da Saúde, sobre a infraestrutura básica, mas nenhum serviço apresentava a constituição da equipe mínima satisfatória. Há o reconhecimento da fragmentação do trabalho em equipe e da dificuldade de sistematizar uma prática interdisciplinar e intersetorial, sendo apontadas falhas para garantir o fluxo de referência e contrarreferência. Identificou-se pouca valorização do papel do gerente como articulador da equipe; a necessidade de perceber o usuário como um todo; e de a equipe trabalhar de forma articulada, buscando a prática comunicativa e as atividades relacionais.The complexity of providing healthcare to people with HIV/Aids requires investment in comprehensive action and care, constituting a challenge for the multidisciplinary work teams to build an interdisciplinary practice. This study sought to analyze comprehensive healthcare in the Specialized Assistance Services for HIV/Aids (SAE-HIV/Aids in Recife, in the State of Pernambuco, starting with the process and organization of team work. This is a case study developed in three SAE-HIV/Aids units, based on a qualitative approach using different research techniques. The results show that SAE-HIV/Aids have complied with most of the Brazilian Health Ministry

  8. Facing Sound - Voicing Art

    DEFF Research Database (Denmark)

    Lønstrup, Ansa

    2013-01-01

    This article is based on examples of contemporary audiovisual art, with a special focus on the Tony Oursler exhibition Face to Face at Aarhus Art Museum ARoS in Denmark in March-July 2012. My investigation involves a combination of qualitative interviews with visitors, observations of the audienc......´s interactions with the exhibition and the artwork in the museum space and short analyses of individual works of art based on reception aesthetics and phenomenology and inspired by newer writings on sound, voice and listening....

  9. 29 CFR 1926.102 - Eye and face protection.

    Science.gov (United States)

    2010-07-01

    ..., or radiation agents. (2) Eye and face protection equipment required by this Part shall meet the... protection Acetylene—Burning, Acetylene—Cutting, Acetylene—Welding Sparks, harmful rays, molten metal, flying...). Chipping Flying particles 1, 3, 4, 5, 6, 7A, 8A. Electric (arc) welding Sparks, intense rays, molten...

  10. Biosimilars approval process.

    Science.gov (United States)

    Zuñiga, Leyre; Calvo, Begoña

    2010-04-01

    For similar biological medicinal products, the so-called biosimilars, clinical trials are required rather than just the bioequivalence studies required to support the registration of a generic small molecule drug product. The EU Directive 2001/83/EC, as amended, stated that where a biological medicinal product which is similar to a reference biological product, does not meet the conditions in the definition of generic medicinal products the results of appropriate pre-clinical tests or clinical trials relating to these conditions must be provided. The challenge is to determine the exact nature of the non-clinical and clinical programme required to gain regulatory approval. The applicant is encouraged to provide a detailed description of the strategy used to demonstrate the biosimilar and the reference product have similar profiles in terms of quality, safety and efficacy. The extent to which comparability can be proven will have quite an impact on how many non-clinical and clinical studies the biosimilar applicant will be required to conduct. The dossier submitted by the applicant to the EMEA should cover all aspects of the comparability assessment and must include data on possible unwanted immune reactions to the therapeutic protein. Post-marketing pharmacovigilance plans are also expected to be included in the biosimilar dossier.

  11. Conjunction Faces Alter Confidence-Accuracy Relations for Old Faces

    Science.gov (United States)

    Reinitz, Mark Tippens; Loftus, Geoffrey R.

    2017-01-01

    The authors used a state-trace methodology to investigate the informational dimensions used to recognize old and conjunction faces (made by combining parts of separately studied faces). Participants in 3 experiments saw faces presented for 1 s each. They then received a recognition test; faces were presented for varying brief durations and…

  12. Pedagogical Characteristics of Online and Face-to-Face Classes

    Science.gov (United States)

    Wuensch, Karl; Aziz, Shahnaz; Ozan, Erol; Kishore, Masao; Tabrizi, M. H. Nassehzadeh

    2008-01-01

    Currently, many students have had experience with both face-to-face and online classes. We asked such students at 46 different universities in the United States to evaluate the pedagogical characteristics of their most recently completed face-to-face class and their most recently completed online class. The results show that students rate online…

  13. Bayesian Face Recognition and Perceptual Narrowing in Face-Space

    Science.gov (United States)

    Balas, Benjamin

    2012-01-01

    During the first year of life, infants' face recognition abilities are subject to "perceptual narrowing", the end result of which is that observers lose the ability to distinguish previously discriminable faces (e.g. other-race faces) from one another. Perceptual narrowing has been reported for faces of different species and different races, in…

  14. Drugs Approved for Stomach (Gastric) Cancer

    Science.gov (United States)

    ... Ask about Your Treatment Research Drugs Approved for Stomach (Gastric) Cancer This page lists cancer drugs approved ... that are not listed here. Drugs Approved for Stomach (Gastric) Cancer Cyramza (Ramucirumab) Docetaxel Doxorubicin Hydrochloride 5- ...

  15. Real Time Face Quality Assessment for Face Log Generation

    DEFF Research Database (Denmark)

    Kamal, Nasrollahi; Moeslund, Thomas B.

    2009-01-01

    Summarizing a long surveillance video to just a few best quality face images of each subject, a face-log, is of great importance in surveillance systems. Face quality assessment is the back-bone for face log generation and improving the quality assessment makes the face logs more reliable....... Developing a real time face quality assessment system using the most important facial features and employing it for face logs generation are the concerns of this paper. Extensive tests using four databases are carried out to validate the usability of the system....

  16. 42 CFR 84.50 - Types of respirators to be approved; scope of approval.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Types of respirators to be approved; scope of... Classification of Approved Respirators; Scope of Approval; Atmospheric Hazards; Service Time § 84.50 Types of respirators to be approved; scope of approval. Approvals shall be issued for the types of respirators...

  17. Face recognition system and method using face pattern words and face pattern bytes

    Energy Technology Data Exchange (ETDEWEB)

    Zheng, Yufeng

    2014-12-23

    The present invention provides a novel system and method for identifying individuals and for face recognition utilizing facial features for face identification. The system and method of the invention comprise creating facial features or face patterns called face pattern words and face pattern bytes for face identification. The invention also provides for pattern recognitions for identification other than face recognition. The invention further provides a means for identifying individuals based on visible and/or thermal images of those individuals by utilizing computer software implemented by instructions on a computer or computer system and a computer readable medium containing instructions on a computer system for face recognition and identification.

  18. Multibiometrics for face recognition

    NARCIS (Netherlands)

    Veldhuis, Raymond; Deravi, Farzin; Tao, Qian

    2008-01-01

    Fusion is a popular practice to combine multiple sources of biometric information to achieve systems with greater performance and flexibility. In this paper various approaches to fusion within a multibiometrics context are considered and an application to the fusion of 2D and 3D face information is

  19. Multibiometrics for face recognition

    NARCIS (Netherlands)

    Veldhuis, Raymond N.J.; Deravi, Farzin; Tao, Q.

    Fusion is a popular practice to combine multiple sources of biometric information to achieve systems with greater performance and flexibility. In this paper various approaches to fusion within a multibiometrics context are considered and an application to the fusion of 2D and 3D face information is

  20. Two Faces of Japan.

    Science.gov (United States)

    Beasley, Conger, Jr.

    1992-01-01

    Discusses the inconsistency between Japanese exploitation of world natural resources and gestures to provide leadership in ecologically innovative technology. Explores Japanese culture, power structure, population trends, environmental ethics, industrialism, and international business practices as they relate to the philosophical face of…

  1. Bayesian Face Sketch Synthesis.

    Science.gov (United States)

    Wang, Nannan; Gao, Xinbo; Sun, Leiyu; Li, Jie

    2017-03-01

    Exemplar-based face sketch synthesis has been widely applied to both digital entertainment and law enforcement. In this paper, we propose a Bayesian framework for face sketch synthesis, which provides a systematic interpretation for understanding the common properties and intrinsic difference in different methods from the perspective of probabilistic graphical models. The proposed Bayesian framework consists of two parts: the neighbor selection model and the weight computation model. Within the proposed framework, we further propose a Bayesian face sketch synthesis method. The essential rationale behind the proposed Bayesian method is that we take the spatial neighboring constraint between adjacent image patches into consideration for both aforementioned models, while the state-of-the-art methods neglect the constraint either in the neighbor selection model or in the weight computation model. Extensive experiments on the Chinese University of Hong Kong face sketch database demonstrate that the proposed Bayesian method could achieve superior performance compared with the state-of-the-art methods in terms of both subjective perceptions and objective evaluations.

  2. Facing Up to Death

    Science.gov (United States)

    Ross, Elizabeth Kubler

    1972-01-01

    Doctor urges that Americans accept death as a part of life and suggests ways of helping dying patients and their families face reality calmly, with peace. Dying children and their siblings, as well as children's feelings about relatives' deaths, are also discussed. (PD)

  3. Autonomous Face Segmentation

    Science.gov (United States)

    1992-09-01

    and Rhea Diamond. "From Piecemeal to Configurational Repre- sentation of Faces," Science, 195:312-314 (Jan 1977). 3. Damasio , Antonio R...34Prosopagnosia," Trends in Neuroscience, 8:132-135 (1985). 4. Damasio , Antonio R. and others. "Prosopagnosia: Anatomic Basis and Behav- ioral Mechanisms

  4. PrimeFaces blueprints

    CERN Document Server

    Jonna, Sudheer

    2014-01-01

    If you are a Java developer with experience of frontend UI development, and want to take the plunge to develop stunning UI applications with the most popular JSF framework, PrimeFaces, then this book is for you. For those with entrepreneurial aspirations, this book will provide valuable insights into how to utilize successful business models.

  5. Facing Up to Death

    Science.gov (United States)

    Ross, Elizabeth Kubler

    1972-01-01

    Doctor urges that Americans accept death as a part of life and suggests ways of helping dying patients and their families face reality calmly, with peace. Dying children and their siblings, as well as children's feelings about relatives' deaths, are also discussed. (PD)

  6. Information technology equipment cooling system

    Science.gov (United States)

    Schultz, Mark D.

    2014-06-10

    According to one embodiment, a system for removing heat from a rack of information technology equipment may include a sidecar indoor air to liquid heat exchanger that cools warm air generated by the rack of information technology equipment. The system may also include a liquid to liquid heat exchanger and an outdoor heat exchanger. The system may further include configurable pathways to connect and control fluid flow through the sidecar heat exchanger, the liquid to liquid heat exchanger, the rack of information technology equipment, and the outdoor heat exchanger based upon ambient temperature and/or ambient humidity to remove heat from the rack of information technology equipment.

  7. Tax Adjusted for Imported Equipment

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    @@ Ministry of Finance, Central Administration of Customs, and State Administration of Taxation of P.R. of China jointly issued a "Notice on the Lists Related to the Interim Provisions on the Adjustment of Import Tax Policy on Major Technical Equipment" (the Notice) on April 13rd to adjust the list of equipment catalog and merchandise attached to the "Interim Provisions on the Import Tax Policy on Major Technical Equipment", as well as the preferential scope and extent of the import tax on a number of major technical equipment.

  8. Age-Dependent Face Detection and Face Categorization Performance

    OpenAIRE

    Claus-Christian Carbon; Martina Grüter; Thomas Grüter

    2013-01-01

    Empirical studies on the development of face processing skills with age show inconsistent patterns concerning qualitative vs. quantitative changes over time or the age range for peak cognitive performance. In the present study, we tested the proficiency in face detection and face categorization with a large sample of participants (N = 312; age range: 2-88 yrs). As test objects, we used so-called Mooney faces, two-tone (black and white) images of faces lacking critical information of a local, ...

  9. Power Product Equipment Technician: Equipment Systems. Teacher Edition. Student Edition.

    Science.gov (United States)

    Hilley, Robert

    This packet contains teacher and student editions on the topic of equipment systems, intended for the preparation of power product equipment technicians. This publication contains seven units: (1) principles of power transmission; (2) mechanical drive systems; (3) principles of fluid power; (4) hydraulic and pneumatic drive systems; (5) wheel and…

  10. Approval plans issues and innovations

    CERN Document Server

    Katz, Linda S

    2013-01-01

    How can you, as an acquisition librarians, keep current on the output of hundreds of publishers? The answer, of course, is that you cannot. For over 30 years, approval plans have been used by librarians to acquire current titles, save staff time, and build core collections. Even today, these reasons seem appropriate, as libraries try to maintain up-to-date collections and control personnel and operating budgets. However, as shown in Approval Plans: Issues and Innovations, the use of approval plans is not so simple and straightforward; their use is subject to complex procedures and policies--an

  11. A Cooperative Model to Improve Hospital Equipments and Drugs Management

    Science.gov (United States)

    Baffo, Ilaria; Confessore, Giuseppe; Liotta, Giacomo; Stecca, Giuseppe

    The cost of services provided by public and private healthcare systems is nowadays becoming critical. This work tackles the criticalities of hospital equipments and drugs management by emphasizing its implications on the whole healthcare system efficiency. The work presents a multi-agent based model for decisional cooperation in order to address the problem of integration of departments, wards and personnel for improving equipments, and drugs management. The proposed model faces the challenge of (i) gaining the benefits deriving from successful collaborative models already used in industrial systems and (ii) transferring the most appropriate industrial management practices to healthcare systems.

  12. Own-race and own-age biases facilitate visual awareness of faces under interocular suppression

    Directory of Open Access Journals (Sweden)

    Timo eStein

    2014-08-01

    Full Text Available The detection of a face in a visual scene is the first stage in the face processing hierarchy. Although all subsequent, more elaborate face processing depends on the initial detection of a face, surprisingly little is known about the perceptual mechanisms underlying face detection. Recent evidence suggests that relatively hard-wired face detection mechanisms are broadly tuned to all face-like visual patterns as long as they respect the typical spatial configuration of the eyes above the mouth. Here, we qualify this notion by showing that face detection mechanisms are also sensitive to face shape and facial surface reflectance properties. We used continuous flash suppression (CFS to render faces invisible at the beginning of a trial and measured the time upright and inverted faces needed to break into awareness. Young Caucasian adult observers were presented with faces from their own race or from another race (race experiment and with faces from their own age group or from another age group (age experiment. Faces matching the observers’ own race and age group were detected more quickly. Moreover, the advantage of upright over inverted faces in overcoming CFS, i.e. the face inversion effect, was larger for own-race and own-age faces. These results demonstrate that differences in face shape and surface reflectance influence access to awareness and configural face processing at the initial detection stage. Although we did not collect data from observers of another race or age group, these findings are a first indication that face detection mechanisms are shaped by visual experience with faces from one’s own social group. Such experience-based fine-tuning of face detection mechanisms may equip in-group faces with a competitive advantage for access to conscious awareness.

  13. Face aftereffects predict individual differences in face recognition ability.

    Science.gov (United States)

    Dennett, Hugh W; McKone, Elinor; Edwards, Mark; Susilo, Tirta

    2012-01-01

    Face aftereffects are widely studied on the assumption that they provide a useful tool for investigating face-space coding of identity. However, a long-standing issue concerns the extent to which face aftereffects originate in face-level processes as opposed to earlier stages of visual processing. For example, some recent studies failed to find atypical face aftereffects in individuals with clinically poor face recognition. We show that in individuals within the normal range of face recognition abilities, there is an association between face memory ability and a figural face aftereffect that is argued to reflect the steepness of broadband-opponent neural response functions in underlying face-space. We further show that this correlation arises from face-level processing, by reporting results of tests of nonface memory and nonface aftereffects. We conclude that face aftereffects can tap high-level face-space, and that face-space coding differs in quality between individuals and contributes to face recognition ability.

  14. CONTROL OF GAS EMISSION AT COAL FACE IN CHINA

    Institute of Scientific and Technical Information of China (English)

    俞启香; 付建华

    1991-01-01

    All the underground coal mines in China are gassy mines. The gas emission at coal face increasingly grows with the increase of working depth and coal output,for example,the gas emission at a full mechanized coal face of mine No.2 at Yongquan with a daily output of 2,000t/d is up to 66--72m3/min. Special gas emission phenomena such as gas blowout, gas and coal outburst etc. have occurred at some faces, which threatens the safe production of face, obstructs the growth of productivity and limits the full play of mechanized equipment. In this paper, gas at face is divided, according to its origin, into three constituents, namely, coming from the coal wall, mined coal and goaf; and a formula for calculation is given. Also, the characteristics of the variation of gas emission at coal face, and thesinfluence of mining sequence of a group of seams and supplied air quantity on the gas emission are discussed. Furthermore, based on the regularity of gas emission st coal face from the above three sources, and on the experiences of years, three principles on controlling gas emission at coal face are presented, that are managing the gas on classification basis, harnessing each source separately and comprehensive prevention and control. Finally, technical measures for prevention and treatment of the accumulation of gas in the upper corner of face, at the working place of coal-winning machine and in the bottom trough of conveyor are introduced.

  15. Human faces are slower than chimpanzee faces.

    Directory of Open Access Journals (Sweden)

    Anne M Burrows

    Full Text Available BACKGROUND: While humans (like other primates communicate with facial expressions, the evolution of speech added a new function to the facial muscles (facial expression muscles. The evolution of speech required the development of a coordinated action between visual (movement of the lips and auditory signals in a rhythmic fashion to produce "visemes" (visual movements of the lips that correspond to specific sounds. Visemes depend upon facial muscles to regulate shape of the lips, which themselves act as speech articulators. This movement necessitates a more controlled, sustained muscle contraction than that produced during spontaneous facial expressions which occur rapidly and last only a short period of time. Recently, it was found that human tongue musculature contains a higher proportion of slow-twitch myosin fibers than in rhesus macaques, which is related to the slower, more controlled movements of the human tongue in the production of speech. Are there similar unique, evolutionary physiologic biases found in human facial musculature related to the evolution of speech? METHODOLOGY/PRINICIPAL FINDINGS: Using myosin immunohistochemistry, we tested the hypothesis that human facial musculature has a higher percentage of slow-twitch myosin fibers relative to chimpanzees (Pan troglodytes and rhesus macaques (Macaca mulatta. We sampled the orbicularis oris and zygomaticus major muscles from three cadavers of each species and compared proportions of fiber-types. Results confirmed our hypothesis: humans had the highest proportion of slow-twitch myosin fibers while chimpanzees had the highest proportion of fast-twitch fibers. CONCLUSIONS/SIGNIFICANCE: These findings demonstrate that the human face is slower than that of rhesus macaques and our closest living relative, the chimpanzee. They also support the assertion that human facial musculature and speech co-evolved. Further, these results suggest a unique set of evolutionary selective pressures on

  16. Electronic Voucher Approval - Financial Management

    Data.gov (United States)

    US Agency for International Development — This process provides a workflow and eSignature capability which allows the CFO to router vouchers for review and electronic signature approval to COTRs in AIDW. It...

  17. Mavyret Approved for Hepatitis C

    Science.gov (United States)

    ... news/fullstory_167618.html Mavyret Approved for Hepatitis C A chronic viral infection of the liver To ... treat adults with certain types of chronic hepatitis C virus (HCV). The combination drug is the first ...

  18. Drugs Approved for Wilms Tumor

    Science.gov (United States)

    This page lists cancer drugs approved by the Food and Drug Administration (FDA) for Wilms tumor and other childhood kidney cancers. The list includes generic names and brand names. The drug names link to NCI's Cancer Drug Information summaries.

  19. Elosulfase alfa: first global approval.

    Science.gov (United States)

    Sanford, Mark; Lo, Jin Han

    2014-04-01

    Elosulfase alfa (Vimizim™) is a recombinant form of N-acetylgalactosamine-6-sulfatase (GALNS) that was developed by BioMarin Pharmaceutical Inc. as an enzyme replacement therapy for patients with mucopolysaccharidosis type IVA (MPS IVA), also known as Morquio A syndrome. Patients with MPS IVA have a GALNS deficiency, which results in serious musculoskeletal, cardiorespiratory and other system disturbances. Elosulfase alfa was approved by the US FDA on 14 February 2014 for the treatment of MPS IVA. The European Medicines Agency Committee for Medicinal Products for Human Use (CHMP) has recently recommended that elosulfase alfa be approved for use in the EU in the same indication. Within the last year, the manufacturer has also filed applications for approval for the use of elosulfase alfa in MPS IVA in Brazil, Australia, Canada and Mexico. This article summarizes the milestones in the development of elosulfase alfa leading to its first global approval in MPS IVA.

  20. Is It Really FDA Approved?

    Science.gov (United States)

    ... must be proven safe and effective to FDA’s satisfaction before companies can market them in interstate commerce. ... product to market. back to top FDA approves food additives in food for people. Although FDA does ...

  1. Drugs Approved for Liver Cancer

    Science.gov (United States)

    This page lists cancer drugs approved by the Food and Drug Administration (FDA) for liver cancer. The list includes generic names and brand names. The drug names link to NCI’s Cancer Drug Information summaries.

  2. Drugs Approved for Vulvar Cancer

    Science.gov (United States)

    This page lists cancer drugs approved by the Food and Drug Administration (FDA) for vulvar cancer. The list includes generic names and brand names. The drug names link to NCI's Cancer Drug Information summaries.

  3. Drugs Approved for Esophageal Cancer

    Science.gov (United States)

    This page lists cancer drugs approved by the Food and Drug Administration (FDA) for esophageal cancer. The list includes generic names and brand names. The drug names link to NCI's Cancer Drug Information summaries.

  4. Drugs Approved for Vaginal Cancer

    Science.gov (United States)

    This page lists cancer drugs approved by the Food and Drug Administration (FDA) to prevent vaginal cancer. The list includes generic names and brand names. The drug names link to NCI’s Cancer Drug Information summaries.

  5. Drugs Approved for Endometrial Cancer

    Science.gov (United States)

    This page lists cancer drugs approved by the Food and Drug Administration (FDA) for endometrial cancer. The list includes generic names and brand names. The drug names link to NCI's Cancer Drug Information summaries.

  6. Drugs Approved for Penile Cancer

    Science.gov (United States)

    This page lists cancer drugs approved by the Food and Drug Administration (FDA) for penile cancer. The list includes generic names and brand names. The drug names link to NCI’s Cancer Drug Information summaries.

  7. Drugs Approved for Bladder Cancer

    Science.gov (United States)

    This page lists cancer drugs approved by the Food and Drug Administration (FDA) for bladder cancer. The list includes generic names, brand names, and common drug combinations, which are shown in capital letters.

  8. Drugs Approved for Breast Cancer

    Science.gov (United States)

    This page lists cancer drugs approved by the Food and Drug Administration (FDA) for breast cancer. The list includes generic names, brand names, and common drug combinations, which are shown in capital letters.

  9. Drugs Approved for Kaposi Sarcoma

    Science.gov (United States)

    This page lists cancer drugs approved by the Food and Drug Administration (FDA) for Kaposi sarcoma. The list includes generic names and brand names. The drug names link to NCI's Cancer Drug Information summaries.

  10. Drugs Approved for Bone Cancer

    Science.gov (United States)

    This page lists cancer drugs approved by the Food and Drug Administration (FDA) for bone cancer. The list includes generic names and brand names. The drug names link to NCI's Cancer Drug Information summaries.

  11. Drugs Approved for Prostate Cancer

    Science.gov (United States)

    ... 2015 2014 2013 2012 Media Resources Media Contacts Multicultural ... This page lists cancer drugs approved by the Food and Drug Administration (FDA) for prostate cancer. The list includes generic ...

  12. Trulance Approved for Chronic Constipation

    Science.gov (United States)

    ... news/fullstory_163171.html Trulance Approved for Chronic Constipation Drug designed to stimulate upper gastrointestinal tract To ... U.S. Food and Drug Administration to treat persistent constipation of unknown (idiopathic) cause in adults. Some 42 ...

  13. Dental operatory design and equipment.

    Science.gov (United States)

    Floyd, M

    1993-08-01

    Improving and expanding the dental services of a practice can involve purchasing new equipment and even modifying or expanding the physical plant. Operatory design is important to the efficiency with which dental procedures can be performed. Equipment purchases to outfit the dental operatory should be made based on the specific needs and functions of a practice.

  14. Rucaparib Approved for Ovarian Cancer.

    Science.gov (United States)

    2017-02-01

    The FDA approved the PARP inhibitor rucaparib to treat women with advanced ovarian cancer who have already been treated with at least two chemotherapies and have a BRCA1 or BRCA2 gene mutation identified by an approved companion diagnostic test. The agency also gave a nod to the FoundationFocus CDxBRCA test to detect BRCA alterations. ©2017 American Association for Cancer Research.

  15. Companion diagnostics: a regulatory perspective from the last 5 years of molecular companion diagnostic approvals.

    Science.gov (United States)

    Roscoe, Donna M; Hu, Yun-Fu; Philip, Reena

    2015-01-01

    Companion diagnostics are essential for the safe and effective use of the corresponding therapeutic products. The US FDA has approved a number of companion diagnostics used to select cancer patients for treatment with contemporaneously approved novel therapeutics. The processes of co-development and co-approval of a therapeutic product and its companion diagnostic have been a learning experience that continues to evolve. Using several companion diagnostics as examples, this article describes the challenges associated with the scientific, clinical and regulatory hurdles faced by FDA and industry alike. Taken together, this discussion is intended to assist manufacturers toward a successful companion diagnostics development plan.

  16. Information technology equipment cooling method

    Energy Technology Data Exchange (ETDEWEB)

    Schultz, Mark D.

    2015-10-20

    According to one embodiment, a system for removing heat from a rack of information technology equipment may include a sidecar indoor air to liquid heat exchanger that cools air utilized by the rack of information technology equipment to cool the rack of information technology equipment. The system may also include a liquid to liquid heat exchanger and an outdoor heat exchanger. The system may further include configurable pathways to connect and control fluid flow through the sidecar heat exchanger, the liquid to liquid heat exchanger, the rack of information technology equipment, and the outdoor heat exchanger based upon ambient temperature and/or ambient humidity to remove heat generated by the rack of information technology equipment.

  17. Aeration equipment for small depths

    Science.gov (United States)

    Sluše, Jan; Pochylý, František

    2015-05-01

    Deficit of air in water causes complications with cyanobacteria mainly in the summer months. Cyanobacteria is a bacteria that produces poison called cyanotoxin. When the concentration of cyanobacteria increases, the phenomena "algal bloom" appears, which is very toxic and may kill all the organisms. This article describes new equipment for aeration of water in dams, ponds and reservoirs with small depth. This equipment is mobile and it is able to work without any human factor because its control is provided by a GPS module. The main part of this equipment consists of a floating pump which pumps water from the surface. Another important part of this equipment is an aerator where water and air are blended. Final aeration process runs in the nozzles which provide movement of all this equipment and aeration of the water. Simulations of the flow are solved by multiphase flow with diffusion in open source program called OpenFOAM. Results will be verified by an experiment.

  18. Automated Face Recognition System

    Science.gov (United States)

    1992-12-01

    atestfOl.feature-vectjJ -averageljJ); for(j=l; <num-coefsj++) for(i= 5 num-train-faces;i++) sdlQjI -(btrainhil.feaure..vecU1- veagU (btraintil.feature- vecU ... vecU ])* (atest(O1.feature-vecUJ - btrain[iI.feature- vecU ]) + temp; btrain(ii.distance = sqrt ( (double) temp); I**** Store the k-nearest neighbors rank

  19. Auto Industry Faces Change

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    A number of indicators show that China's auto industry is facing a new round of large-scale restructuring. When the global auto industry was undergoing reorganization 10 years ago, China's auto industry was in its early stages, acting in a relatively closed market, and thus it missed out on that important event. However, the situation is different today. In the past decade, China's auto industry has grown at a rapid pace. While the world's major transnational companies are

  20. Decoding of faces and face components in face-sensitive human visual cortex

    Directory of Open Access Journals (Sweden)

    David F Nichols

    2010-07-01

    Full Text Available A great challenge to the field of visual neuroscience is to understand how faces are encoded and represented within the human brain. Here we show evidence from functional magnetic resonance imaging (fMRI for spatially distributed processing of the whole face and its components in face-sensitive human visual cortex. We used multi-class linear pattern classifiers constructed with a leave-one-scan-out verification procedure to discriminate brain activation patterns elicited by whole faces, the internal features alone, and the external head outline alone. Furthermore, our results suggest that whole faces are represented disproportionately in the fusiform cortex (FFA whereas the building blocks of faces are represented disproportionately in occipitotemporal cortex (OFA. Faces and face components may therefore be organized with functional clustering within both the FFA and OFA, but with specialization for face components in the OFA and the whole face in the FFA.

  1. Equipe de trabalho

    Directory of Open Access Journals (Sweden)

    Gabriel Gerber Hornink

    2014-08-01

    Full Text Available   Equipe de Trabalho 2014 1. Equipe editorial Editor-Chefe Bayardo Bapstista Torres, Instituto de Química - USP, Brasil Eduardo Galembeck, Departamento de Bioquímica Instituto de Biologia UNICAMP, Brasil   Editores Gabriel Gerber Hornink, Depto. Bioquímica, Instituto de Ciências Biomédicas, Universidade - Federal de Alfenas - Unifal-MG, Brasil Vera Maria Treis Trindade, Instituto de Ciências Básicas da Saúde, Departamento de Bioquímica, Universidade Federal do Rio Grande do Sul, Brasil   Corpo Editorial Adriana Cassina, Departamento de Bioquímica, Facultad de Medicina, Universidad de la República, Uruguai Angel Herráez, Departamento de Bioquímica y Biología molecular, Universidad de Alcalá de Henares, Madrid, Espanha André Amaral Gonçalves Bianco, Universidade Federal de São Paulo (Unifesp, Brasil Denise Vaz de Macedo, Departamento de Bioquímica, Instituto de Biologia, Universidade Estadual de Campinas - Unicamp, Brasil Eneida de Paula, Departamento de Bioquímica, Instituto de Biologia, Universidade Estadual de Campinas - Unicamp, Brasil Guilherme Andrade Marson, Instituto de Química - USP, Brasil Jose Antonio Martinez Oyanedel, Universidad de Concepción, Chile Josep Maria Fernández Novell, Dept. Bioquímica i Biologia Molecular Universitat de Barcelona, Espanha Leila Maria Beltramini, Instituto de Física de São Carlos, Universidade Estadual de São Paulo - USP, Brasil Manuel João da Costa, Escola de Ciências da Saúde, Universidade do Minho, Portugal Maria Lucia Bianconi, Instituto de Bioquímica Médica Universidade Federal do Rio de Janeiro (UFRJ, Brasil María Noel Alvarez, Departamento de Bioquímica, Facultad de Medicina, Universidad de la República, Uruguai Miguel Ángel Medina Torres, Department of Molecular Biology & Biochemistry Faculty of Sciences University of Málaga, Espanha Nelma Regina Segnini Bossolan, Instituto de Física de São Carlos, Universidade de São Paulo - USP, Brasil Paulo De Avila

  2. 30 CFR 254.45 - Verifying the capabilities of your response equipment.

    Science.gov (United States)

    2010-07-01

    ... accordance with MMS-approved test criteria. You may use the document “Test Protocol for the Evaluation of Oil... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Verifying the capabilities of your response equipment. 254.45 Section 254.45 Mineral Resources MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE...

  3. 14 CFR 121.353 - Emergency equipment for operations over uninhabited terrain areas: Flag, supplemental, and...

    Science.gov (United States)

    2010-01-01

    ... and rescue in case of an emergency: (a) Suitable pyrotechnic signaling devices. (b) An approved... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Emergency equipment for operations over... Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIR...

  4. 14 CFR 91.221 - Traffic alert and collision avoidance system equipment and use.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Traffic alert and collision avoidance... RULES Equipment, Instrument, and Certificate Requirements § 91.221 Traffic alert and collision avoidance... collision avoidance system installed in a U.S.-registered civil aircraft must be approved by...

  5. Face-space: A unifying concept in face recognition research.

    Science.gov (United States)

    Valentine, Tim; Lewis, Michael B; Hills, Peter J

    2016-10-01

    The concept of a multidimensional psychological space, in which faces can be represented according to their perceived properties, is fundamental to the modern theorist in face processing. Yet the idea was not clearly expressed until 1991. The background that led to the development of face-space is explained, and its continuing influence on theories of face processing is discussed. Research that has explored the properties of the face-space and sought to understand caricature, including facial adaptation paradigms, is reviewed. Face-space as a theoretical framework for understanding the effect of ethnicity and the development of face recognition is evaluated. Finally, two applications of face-space in the forensic setting are discussed. From initially being presented as a model to explain distinctiveness, inversion, and the effect of ethnicity, face-space has become a central pillar in many aspects of face processing. It is currently being developed to help us understand adaptation effects with faces. While being in principle a simple concept, face-space has shaped, and continues to shape, our understanding of face perception.

  6. Measuring Imputed Cost in the Semiconductor Equipment Supply Chain

    OpenAIRE

    2003-01-01

    We consider the order-fulfillment process of a supplier producing a customized capital good, such as production equipment, commercial aircraft, medical devices, or defense systems. As is common in these industries, prior to receiving a firm purchase order from the customer, the supplier receives a series of shared forecasts, which are called "soft orders." Facing a stochastic internal manufacturing lead time, the supplier must decide at what time to begin the fulfillment of the order. This de...

  7. 9 CFR 147.52 - Approved tests.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Approved tests. 147.52 Section 147.52... Approved Tests § 147.52 Approved tests. (a) The procedures for the bacteriological examination of poultry and poultry environments described in this part are approved tests for use in the NPIP. In...

  8. Age-dependent face detection and face categorization performance.

    Science.gov (United States)

    Carbon, Claus-Christian; Grüter, Martina; Grüter, Thomas

    2013-01-01

    Empirical studies on the development of face processing skills with age show inconsistent patterns concerning qualitative vs. quantitative changes over time or the age range for peak cognitive performance. In the present study, we tested the proficiency in face detection and face categorization with a large sample of participants (N = 312; age range: 2-88 yrs). As test objects, we used so-called Mooney faces, two-tone (black and white) images of faces lacking critical information of a local, featural and relational nature, reflecting difficult real world face processing conditions. We found that performance in the assessment of gender and age from Mooney faces increases up to about age 15, and decreases from 65 years on. The implications of these findings are discussed in the light of classic and recent findings from face development literature.

  9. 78 FR 19063 - Airworthiness Approval for Aircraft Forward-Looking Windshear and Turbulence Radar Systems

    Science.gov (United States)

    2013-03-28

    ... Turbulence Radar Systems AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Request for comment... approval for aircraft forward-looking windshear and turbulence radar systems. The planned advisory circular..., Airborne Weather Radar Equipment. The objective is to leverage the installation specific guidance from...

  10. TRANSPORT AND EMPLACEMENT EQUIPMENT DESCRIPTIONS

    Energy Technology Data Exchange (ETDEWEB)

    NA

    1997-09-29

    The objective and the scope of this document are to list and briefly describe the major mobile equipment necessary for waste package (WP) Transport and Emplacement in the proposed subsurface nuclear waste repository at Yucca Mountain. Primary performance characteristics and some specialized design features of the equipment are explained and summarized in the individual subsections of this document. The Transport and Emplacement equipment described in this document consists of the following: (1) WP Transporter; (2) Reusable Rail Car; (3) Emplacement Gantry; (4) Gantry Carrier; and (5) Transport Locomotive.

  11. A comparative study of face processing using scrambled faces

    OpenAIRE

    Taubert, Jessica; Aagten-Murphy, David; Parr, Lisa A.

    2012-01-01

    It is a widespread assumption that all primate species process faces in the same way because the species are closely related and they engage in similar social interactions. However, this approach ignores potentially interesting and informative differences that may exist between species. This paper describes a comparative study of holistic face processing. Twelve subjects (six chimpanzees Pan troglodytes and six rhesus monkeys Macaca mulatta) were trained to discriminate whole faces (faces wit...

  12. Face-to-Face Interference in Typical and Atypical Development

    Science.gov (United States)

    Riby, Deborah M.; Doherty-Sneddon, Gwyneth; Whittle, Lisa

    2012-01-01

    Visual communication cues facilitate interpersonal communication. It is important that we look at faces to retrieve and subsequently process such cues. It is also important that we sometimes look away from faces as they increase cognitive load that may interfere with online processing. Indeed, when typically developing individuals hold face gaze…

  13. Challenges facing production grids

    Energy Technology Data Exchange (ETDEWEB)

    Pordes, Ruth; /Fermilab

    2007-06-01

    Today's global communities of users expect quality of service from distributed Grid systems equivalent to that their local data centers. This must be coupled to ubiquitous access to the ensemble of processing and storage resources across multiple Grid infrastructures. We are still facing significant challenges in meeting these expectations, especially in the underlying security, a sustainable and successful economic model, and smoothing the boundaries between administrative and technical domains. Using the Open Science Grid as an example, I examine the status and challenges of Grids operating in production today.

  14. Many Faces of Migrations

    Directory of Open Access Journals (Sweden)

    Milica Antić Gaber

    2013-12-01

    The title “Many faces of migration”, connecting contributions in this special issue, is borrowed from the already mentioned Gallup Institute’s report on global migration (Esipova, 2011. The guiding principle in the selection of the contributions has been their diversity, reflected also in the list of disciplines represented by the authors: sociology, geography, ethnology and cultural anthropology, history, art history, modern Mediterranean studies, gender studies and media studies. Such an approach necessarily leads not only to a diverse, but at least seemingly also incompatib

  15. Faced with a dilemma

    DEFF Research Database (Denmark)

    Christensen, Anne Vinggaard; Christiansen, Anne Hjøllund; Petersson, Birgit

    2013-01-01

    's legal right to choose TOP and considerations about the foetus' right to live were suppressed. Midwives experienced a dilemma when faced with aborted foetuses that looked like newborns and when aborted foetuses showed signs of life after a termination. Furthermore, they were critical of how physicians...... counsel women/couples after prenatal diagnosis. CONCLUSIONS: The midwives' practice in relation to late TOP was characterised by an acknowledgement of the growing ethical status of the foetus and the emotional reactions of the women/couples going through late TOP. Other professions as well as structural...

  16. ENERGY STAR Certified Imaging Equipment

    Data.gov (United States)

    U.S. Environmental Protection Agency — Certified models meet all ENERGY STAR requirements as listed in the Version 2.0 ENERGY STAR Program Requirements for Imaging Equipment that are effective as of...

  17. EAS Equipment Authorization Grantee Registrations

    Data.gov (United States)

    Federal Communications Commission — EAS (Equipment Authorization System). Radio Frequency (RF) devices are required to be properly authorized under 47 CFR Part 2 prior to being marketed or imported...

  18. EMR Measurements on NDA Equipment

    Energy Technology Data Exchange (ETDEWEB)

    Macdonell, Alexander Thomas [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Meierbachtol, Krista Cruse [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Evans, James Walter Jr. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Mayo, Douglas R. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-07-10

    Electromagnetic radiation (EMR) emission strength measurements were performed on a suite of passive non-destructive assay (NDA) radiation detection equipment. Data were collected from 9 kHz up to 6 GHz on each of the assembled systems.

  19. Aging changes in the face

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/article/004004.htm Aging changes in the face To use the sharing ... face with age References Brodie SE, Francis JH. Aging and disorders of the eye. In: Fillit HM, ...

  20. Military GPS User Equipment (MGUE)

    Science.gov (United States)

    2015-04-29

    Space and Missile Systems Center Military GPS User Equipment (MGUE) Lt Col James “Mutt” Wilson Program Manager 29 Apr 15 Information contained in...SUBTITLE Military GPS User Equipment (MGUE) 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK...SUPPLEMENTARY NOTES Presented at the GPS Partnership Council 2015 (GPSPC15), held April 29 to May 1, 2015, at the Los Angeles AFB, CA. 14. ABSTRACT

  1. Nuclear Weapon and Military Equipment

    Directory of Open Access Journals (Sweden)

    N. Natarajan

    1985-10-01

    Full Text Available Military equipment must survive a, nuclear attack if enough personnel required to operate them remain combat effective. To achieve this goal, the criteria that determine equipment survivability should be established and any new design should incorporate these criteria to evolve a hardened design. An analysis of the overall response by considering the response to each individual nuclear environment can result in a balanced overall hardened system. The paper discusses the criteria required to be known.

  2. Electronic Approval of Invoices (AEF)

    CERN Multimedia

    2003-01-01

    With a view to the simplification of administrative procedures, AS and FI Divisions have drawn up a new procedure for the electronic approval of invoices via the EDH application. The aim of this new procedure is to rationalise the invoice approval process, notably by eliminating paper copies from the approval circuit. This will simplify the processing of invoices and facilitate their timely settlement, while at the same time maintaining a high level of security. This new procedure, in its current phase, will be gradually implemented from 1 November 2003 onwards. For clarification and further information, please see: http://ais.cern.ch/projs/AEF/help/help.htm . Finance Division, Accounts Payable Tel.: 7.22.95

  3. Research on Selection of Equipment Maintenance Modes

    Institute of Scientific and Technical Information of China (English)

    SHANG Wen-li; SHI Hai-bo; HE Bai-tao

    2006-01-01

    The development of equipment maintenance management is introduced, and equipment maintenance concept is defined. Equipment maintenance modes are classified, analyzed and compared, which merits and demerits are pointed out. At last, a decision-making frame to select equipment maintenance modes is advanced, and steps to select and implement equipment maintenance are given.

  4. 14 CFR 25.1415 - Ditching equipment.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Ditching equipment. 25.1415 Section 25.1415... STANDARDS: TRANSPORT CATEGORY AIRPLANES Equipment Safety Equipment § 25.1415 Ditching equipment. (a) Ditching equipment used in airplanes to be certificated for ditching under § 25.801, and required by...

  5. FaceID: A face detection and recognition system

    Energy Technology Data Exchange (ETDEWEB)

    Shah, M.B.; Rao, N.S.V.; Olman, V.; Uberbacher, E.C.; Mann, R.C.

    1996-12-31

    A face detection system that automatically locates faces in gray-level images is described. Also described is a system which matches a given face image with faces in a database. Face detection in an Image is performed by template matching using templates derived from a selected set of normalized faces. Instead of using original gray level images, vertical gradient images were calculated and used to make the system more robust against variations in lighting conditions and skin color. Faces of different sizes are detected by processing the image at several scales. Further, a coarse-to-fine strategy is used to speed up the processing, and a combination of whole face and face component templates are used to ensure low false detection rates. The input to the face recognition system is a normalized vertical gradient image of a face, which is compared against a database using a set of pretrained feedforward neural networks with a winner-take-all fuser. The training is performed by using an adaptation of the backpropagation algorithm. This system has been developed and tested using images from the FERET database and a set of images obtained from Rowley, et al and Sung and Poggio.

  6. A novel thermal face recognition approach using face pattern words

    Science.gov (United States)

    Zheng, Yufeng

    2010-04-01

    A reliable thermal face recognition system can enhance the national security applications such as prevention against terrorism, surveillance, monitoring and tracking, especially at nighttime. The system can be applied at airports, customs or high-alert facilities (e.g., nuclear power plant) for 24 hours a day. In this paper, we propose a novel face recognition approach utilizing thermal (long wave infrared) face images that can automatically identify a subject at both daytime and nighttime. With a properly acquired thermal image (as a query image) in monitoring zone, the following processes will be employed: normalization and denoising, face detection, face alignment, face masking, Gabor wavelet transform, face pattern words (FPWs) creation, face identification by similarity measure (Hamming distance). If eyeglasses are present on a subject's face, an eyeglasses mask will be automatically extracted from the querying face image, and then masked with all comparing FPWs (no more transforms). A high identification rate (97.44% with Top-1 match) has been achieved upon our preliminary face dataset (of 39 subjects) from the proposed approach regardless operating time and glasses-wearing condition.e

  7. Enabling dynamics in face analysis

    NARCIS (Netherlands)

    Dibeklioğlu, H.

    2014-01-01

    Most of the approaches in automatic face analysis rely solely on static appearance. However, temporal analysis of expressions reveals interesting patterns. For a better understanding of the human face, this thesis focuses on temporal changes in the face, and dynamic patterns of expressions. In addit

  8. Forensic Face Recognition: A Survey

    NARCIS (Netherlands)

    Ali, Tauseef; Spreeuwers, Luuk; Veldhuis, Raymond; Quaglia, Adamo; Epifano, Calogera M.

    2012-01-01

    The improvements of automatic face recognition during the last 2 decades have disclosed new applications like border control and camera surveillance. A new application field is forensic face recognition. Traditionally, face recognition by human experts has been used in forensics, but now there is a

  9. 46 CFR 160.151-21 - Equipment required for SOLAS A and SOLAS B inflatable liferafts.

    Science.gov (United States)

    2010-10-01

    ... or multi-tone whistle of corrosion-resistant construction. (j) Rocket parachute flare (Regulation III/38.5.1.10). Each rocket parachute flare described by Regulation III/38.5.1.10 must be approved by the... instructions for immediate action are visible through both faces of the envelope. (x) Thermal protective...

  10. 77 FR 8865 - Public Water System Supervision Program Approval for the State of Illinois; Tentative Approval

    Science.gov (United States)

    2012-02-15

    ... From the Federal Register Online via the Government Publishing Office ENVIRONMENTAL PROTECTION AGENCY Public Water System Supervision Program Approval for the State of Illinois; Tentative Approval... State of Illinois submitted a primacy application for its approved Public Water System...

  11. Face Processing: Models For Recognition

    Science.gov (United States)

    Turk, Matthew A.; Pentland, Alexander P.

    1990-03-01

    The human ability to process faces is remarkable. We can identify perhaps thousands of faces learned throughout our lifetime and read facial expression to understand such subtle qualities as emotion. These skills are quite robust, despite sometimes large changes in the visual stimulus due to expression, aging, and distractions such as glasses or changes in hairstyle or facial hair. Computers which model and recognize faces will be useful in a variety of applications, including criminal identification, human-computer interface, and animation. We discuss models for representing faces and their applicability to the task of recognition, and present techniques for identifying faces and detecting eye blinks.

  12. Facing the Challenges

    DEFF Research Database (Denmark)

    He, Kai

    2014-01-01

    China's rise signifies a gradual transformation of the international system from unipolarity to a non-unipolar world. ,4s an organization of small and middle powers, ASEAN faces strategic uncertainties brought about by the power transition in the system. Deepening economic interdependence between...... ASEAN and China has amplified the economic cost for the ASEAN states to use traditional military means to deal with China s rise. Applying institutional balancing theory, this paper examines how ASEAN has adopted various institutional instruments, such as the ASEAN Regional Forum (ARF), the East Asia...... Summit (EAS), the Regional Comprehensive Economic Partnership (RCEP), and the ASEAN Community, to constrain and shape China's behaviour in the region in the post-Cold War era. It argues that due to globalization and economic interdependence, the power transition in the 21st century is different from...

  13. Préface

    Directory of Open Access Journals (Sweden)

    Marguerite Mendell

    2008-12-01

    Full Text Available C’est avec grand plaisir que je contribue la préface de ce numéro d’Interventions économiques dédié à la pertinence de la pensée de Karl Polanyi au début du 21ème siècle. Je suis très reconnaissante aux éditeurs, Diane Gabrielle Tremblay, Jean-Marc Fontan et Jean Louis Laville d’avoir pris l’initiative de préparer ce numéro pour le 11ème colloque international de l’Institut Karl Polanyi, qui correspond aussi au 20ème anniversaire de l’Institut, établi à l’Université Concordia en 1988. Interve...

  14. Rockbolting in gateroads of top coal caving longwall faces

    Energy Technology Data Exchange (ETDEWEB)

    Xiu, Z. [SCT Ltd. (China); Jiang, J. [Yanzhou Coal Mining Co. Ltd. (China)

    2004-07-01

    This paper presents technology development of rockbolting in gateroads of top coal caving longwall faces in Yanzhou. The development work has been concentrated on understanding behaviour of gateroads of top coal caving longwalls; introducing a monitoring based feedback design approach; upgrading rockbolting consumables and equipment; optimisation of rockbolting practice; development of effective supplemental reinforcement technique; and last but not the least, establishment of necessary legal framework such as consumables standards and practice guidelines. The paper then highlights aspects of future development work with rockbolting in gateroads of top coal caving longwall faces, such as integrated cutting/bolting cycle for higher drivage rate.

  15. Faces of CMS: Photomosaic (September 2013, low-resolution)

    CERN Multimedia

    Antonelli, Jamie

    2013-01-01

    The "Faces of CMS" photomosaic project aims to show the human element of the CMS Experiment. Most of the images for public outreach show the experimental equipment of CMS or physics results and collision displays. With a collaboration of around 3,000 people scattered around the globe, it's difficult to present the members of CMS in any one image. We asked any interested CMS members to sign up for the project, and allow us to use their photographs. The resulting photo mosaic contains the faces of 1,271 CMS members.

  16. How to the likelihood of CDM approval? Institutional shortcomings and the case of West Africa

    DEFF Research Database (Denmark)

    Brandt, Urs Steiner; Svendsen, Gert Tinggaard

    2014-01-01

    How can the likelihood of Clean Development Mechanism (CDM) approval be improved in the face of institutional shortcomings? To answer this question, we focus on the three institutional shortcomings of income sharing, risk sharing and corruption prevention concerning afforestation/reforestation (A...

  17. [Comparative studies of face recognition].

    Science.gov (United States)

    Kawai, Nobuyuki

    2012-07-01

    Every human being is proficient in face recognition. However, the reason for and the manner in which humans have attained such an ability remain unknown. These questions can be best answered-through comparative studies of face recognition in non-human animals. Studies in both primates and non-primates show that not only primates, but also non-primates possess the ability to extract information from their conspecifics and from human experimenters. Neural specialization for face recognition is shared with mammals in distant taxa, suggesting that face recognition evolved earlier than the emergence of mammals. A recent study indicated that a social insect, the golden paper wasp, can distinguish their conspecific faces, whereas a closely related species, which has a less complex social lifestyle with just one queen ruling a nest of underlings, did not show strong face recognition for their conspecifics. Social complexity and the need to differentiate between one another likely led humans to evolve their face recognition abilities.

  18. REVIEW OF NRC APPROVED DIGITAL CONTROL SYSTEMS ANALYSIS

    Energy Technology Data Exchange (ETDEWEB)

    D.W. Markman

    1999-09-17

    systems approved for use in the nuclear power industry by the NRC. (3) Identify and discuss key design issues, features, benefits, and limitations of these NRC approved digital control systems that can be applied as design guidance and correlated to the Monitored Geologic Repository (MGR) design requirements. (4) Identify codes and standards used in the design of these NRC approved digital control systems and discuss their possible applicability to the design of a subsurface nuclear waste repository. (5) Evaluate the NRC approved digital control system's safety, reliability and maintainability features and issues. Apply these to MGR design methodologies and requirements. (6) Provide recommendations for use in developing design criteria in the System Description Documents for the digital control systems of the subsurface nuclear waste repository at Yucca Mountain. (7) Develop recommendations for applying NRC approval methods for digital control systems for the subsurface nuclear waste repository at Yucca Mountain. This analysis will focus on the development of the issues, criteria and methods used and required for identifying the appropriate requirements for digital based control systems. Attention will be placed on development of recommended design criteria for digital controls including interpretation of codes, standards and regulations. Attention will also focus on the use of digital controls and COTS (Commercial Off-the-shelf) technology and equipment in selected NRC approved digital control systems, and as referenced in applicable codes, standards and regulations. The analysis will address design issues related to COTS technology and how they were dealt with in previous NRC approved digital control systems.

  19. Alkylbenzene Project in Xinjiang Approved

    Institute of Scientific and Technical Information of China (English)

    Zhou Weiyong

    1996-01-01

    @@ The feasibility study on alkylbenzene project in Dushanzi, Xinjiang Uygur Autonomous Region, submitted jointly by the government of Xinjiang UygurAutonomous Region and China National Petroleum Corporation (CNPC), has been approved by State Council recently,after pass appraisa l by China International Engineering Consulting Corporation entrusted by State Planning Committee.

  20. Drugs Approved for Multiple Myeloma

    Science.gov (United States)

    This page lists cancer drugs approved by the Food and Drug Administration (FDA) for multiple myeloma and other plasma cell neoplasms. The list includes generic names, brand names, and common drug combinations, which are shown in capital letters. The drug names link to NCI's Cancer Drug Information summaries.

  1. Drugs Approved for Myeloproliferative Neoplasms

    Science.gov (United States)

    This page lists cancer drugs approved by the Food and Drug Administration (FDA) for myeloproliferative neoplasms. The list includes generic names, brand names, and common drug combinations, which are shown in capital letters. The drug names link to NCI's Cancer Drug Information summaries.

  2. CERN lifting equipment use authorisation

    CERN Multimedia

    2004-01-01

    Updated procedures to obtain authorisation to use lifting equipment at CERN have been put in place. As a general rule, lifting equipment at CERN may be operated only by qualified staff, i.e. those who have had intensive training in and adequate experience of using such equipment. However, for straightforward recurrent lifting operations, the Organization issues authorisations to operate lifting equipment at CERN to people who have followed a suitable course of training. The authorisation to use lifting equipment is valid for five years. More information about the procedures will be found at the following addresses: CERN Staff: http://sc-gs.web.cern.ch/sc-gs/gs_ms/ms/freq%20topics/te_mc_FT_staff.htm Associated members of the personnel (users, ...) : http://sc-gs.web.cern.ch/sc-gs/gs_ms/ms/freq%20topics/te_mc_FT_users.htm Contractors personnel : http://sc-gs.web.cern.ch/sc-gs/gs_ms/ms/freq%20topics/te_mc_FT_peoplefromext.htm In case of questions, please send a message to: securite...

  3. Improving electrical equipment and control systems for shield integrated mining systems

    Energy Technology Data Exchange (ETDEWEB)

    Rabinovich, Z.M.; Starikov, B.Ya.; Kibrik, I.S.

    1984-06-01

    The design and operation are discussed for electrical equipment and control systems for the 1AShchM, the ANShch and the 2ANShch shield integrated face systems consisting of shield supports, coal plow and chain conveyor. The shield system is used for mining inclined and steep coal seams endangered by coal dust explosions, methane or rock bursts. Control and electrical system for 3 types of shield face mining systems is similar. It cuts energy supply when methane content at working faces exceeds the maximum permissible level, controls haulage rate and cutting rate of a coal plow, controls operation of shield supports (using the Sirena system), controls dust suppression system and its water consumption. The system is also equipped with communications equipment. Tests of the control and electrical system for the integrated shield system carried out in the im. Gagarin mine in the Ukraine are described. The VAUS III control system developed by Dongiprouglemash was tested.

  4. Mining equipment manufacturers; 17th ed.

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    The report analyses and compares the financial ratios of mining equipment manufacturers in the United Kingdom. It includes companies who produce equipment for the mining industry such as cutting tools, drilling equipment, crushers, screens, centrifuges, tunnelling equipment, conveyors and other materials handling equipment, hydraulic equipment, filtration, pumping, and mixing equipment and ventilation equipment. The report presents business ratios analysing profitability, efficiency, liquidity, employee-based ratios and a series of figures on growth rate. Accounting data for the individual companies are given, together with principal ratios, areas of activity, names of directors and company secretary, trading address and holding companies.

  5. Mining equipment manufacturers. 13th edition

    Energy Technology Data Exchange (ETDEWEB)

    1992-01-01

    The report analyses and compares the financial ratios of mining equipment manufacturers in the United Kingdom. It includes companies who produce equipment for the mining industry such as cutting tools, drilling equipment, crushers, screens, centrifuges, tunnelling equipment, conveyors and other materials handling equipment, hydraulic equipment, filtration, pumping and mixing equipment and ventilation equipment. The report presents business ratios analysing profitability, efficiency, liquidity, employee-based ratios and a series of figures on growth rate. Accounting data for the individual companies are given, together with principal ratios, areas of activity, names of directors and company secretary, trading address and holding companies.

  6. Aerodynamics Laboratory Facilities, Equipment, and Capabilities

    Data.gov (United States)

    Federal Laboratory Consortium — The following facilities, equipment, and capabilities are available in the Aerodynamics Laboratory Facilities and Equipment (1) Subsonic, open-jet wind tunnel with...

  7. Comparing Face Detection and Recognition Techniques

    OpenAIRE

    Korra, Jyothi

    2016-01-01

    This paper implements and compares different techniques for face detection and recognition. One is find where the face is located in the images that is face detection and second is face recognition that is identifying the person. We study three techniques in this paper: Face detection using self organizing map (SOM), Face recognition by projection and nearest neighbor and Face recognition using SVM.

  8. [Facing perinatal bereavement].

    Science.gov (United States)

    de Launière, M G; Boudreault, A

    1995-02-01

    Pregnancy and childbirth are, for most women, wonderful and memorable experiences. Yet, without warning, they can have a heartbreaking outcome. Regardless of the stage of pregnancy at which a baby is lost, the family grieves the death. The authors of this article suggest how nurses can best support the couple, siblings, grandparents and significant others through their time of sorrow. The article highlights key points from the 1992 the Hôpital de Chicoutimi (Québec) reference guide entitled "Guide d'accompagnement des familles devant un deuil périnatal." The guide includes the types of grief and the six phases of grief resolution. It outlines specific nursing interventions and recommends various strategies for the nurse to help these families grieve their loss. Some strategies include the holding and cuddling of the baby by the parents, post-partum follow-up by nursing personnel and family therapy sessions. The authors suggest that nurses who are knowledgeable about the grief experiences of these parents will be better equipped to help other parents cope with similar grief. The increased knowledge will also assist nurses to sort out and deal with their own feelings on this subject. Nurses who are able to effectively care for these grieving families can often enhance their personal and professional self-esteem.

  9. Elektronická komunikace vs. komunikace face to face

    OpenAIRE

    Pipková, Zuzana

    2009-01-01

    This thesis deals with new forms of communication particularly electronic ones. The main goal is to distinguish electronic communication from face to face communication in a way that differs from traditional media theories. By using examples of the most important medium in electronic communication, Internet, it is shown that nowadays we have such forms of electronic communication that surpass the traditional classification of oral/written communication, immediate/mediate communication, face t...

  10. MULTIDISCIPLINARIDADE E TRABALHO EM EQUIPE

    Directory of Open Access Journals (Sweden)

    Helmuth Krüger

    2013-10-01

    Full Text Available Foram dois os objetivos deste trabalho: estabelecer critérios para a comparação de pesquisas científicas e analisar alguns problemas psicossociais que podem ocorrer em equipes multiprofissionais. Conclui-se que os critérios de comparação podem ser os quatro componentes de qualquer disciplina científica: o conjunto dos pressupostos filosóficos, o objeto a investigar, a metodologia de pesquisa e a linguagem técnica empregada na elaboração de teorias. Quanto às equipes multiprofissionais, foram analisados 3 problemas: a atribuição de papéis sociais, a confidencialidade das informações e as diferenças de prestígio social entre os membros dessas equipes.

  11. Another donation of computer equipment

    CERN Multimedia

    Anaïs Schaeffer

    2014-01-01

    On Thursday 27 February, CERN was pleased to donate computer equipment to a physics institute in the Philippines.   H.E. Leslie J. Baja and Rolf Heuer. Following donations of computer equipment to institutes in Morocco, Ghana, Bulgaria, Serbia and Egypt, CERN is to send 50 servers and 4 network switches to the National Institute of Physics at the University of the Philippines Diliman. CERN’s Director-General Rolf Heuer and the Ambassador of the Philippines to Switzerland and Lichtenstein, H.E. Leslie J. Baja, spoke of their enthusiasm for the project during an official ceremony. The equipment will be used for various high energy physics research programmes in the Philippines and for the University’s development of digital resources for science.

  12. Holistic crowding of Mooney faces.

    Science.gov (United States)

    Farzin, Faraz; Rivera, Susan M; Whitney, David

    2009-06-29

    An object or feature is generally more difficult to identify when other objects are presented nearby, an effect referred to as crowding. Here, we used Mooney faces to examine whether crowding can also occur within and between holistic face representations (C. M. Mooney, 1957). Mooney faces are ideal stimuli for this test because no cues exist to distinguish facial features in a Mooney face; to find any facial feature, such as an eye or a nose, one must first holistically perceive the image as a face. Through a series of six experiments we tested the effect of crowding on Mooney face recognition. Our results demonstrate crowding between and within Mooney faces and fulfill the diagnostic criteria for crowding, including eccentricity dependence and lack of crowding in the fovea, critical flanker spacing consistent with less than half the eccentricity of the target, and inner-outer flanker asymmetry. Further, our results show that recognition of an upright Mooney face is more strongly impaired by upright Mooney face flankers than inverted ones. Taken together, these results suggest crowding can occur selectively between high-level representations of faces and that crowding must occur at multiple levels in the visual system.

  13. [A review of face illusions].

    Science.gov (United States)

    Kitaoka, Akiyoshi

    2012-07-01

    A variety of "face illusions," including the gaze illusion, face inversion effects, geometrical illusions, reversible figures, and other interesting phenomena related to face perception, are reviewed in the present report, with many sample images. The "gaze illusion" or the illusion of eye direction includes the Wollaston illusion, the luminance-induced gaze shift, the Bogart illusion, the eye-shadow-dependent gaze illusion, the Mona Lisa effect, etc. "Face inversion effects" refer to the Thatcher illusion, the fat face-thin illusion, underestimation of the upright face, the nose-shortening illusion of the inverted face, etc. "Geometrical illusions" include the Lee-Freire illusion, Yang's iris illusion, overestimation of the farther eye, the eye-shadow-dependent eye-size illusion, etc. "Reversible figures" contain the whole-part reversible figure, Rubin's vase-face illusion, or hybrid images. "Other interesting phenomena" include the flashed face distortion effect, the presidential illusion, predominance of the mouth or eyebrows over eye expression, the eye direction aftereffect, etc. It is suggested that some of these phenomena are highly specific to face perception.

  14. The effect of familiarity on face adaptation

    OpenAIRE

    Laurence, Sarah

    2013-01-01

    Face adaptation techniques have been used extensively to investigate how faces are processed. It has even been suggested that face adaptation is functional in calibrating the visual system to the diet of faces to which an observer is exposed. Yet most adaptation studies to date have used unfamiliar faces: few have used faces with real world familiarity. Familiar faces have more abstractive representations than unfamiliar faces. The experiments in this thesis therefore examined face adaptation...

  15. Adaptation improves face trustworthiness discrimination

    Science.gov (United States)

    Keefe, B. D.; Dzhelyova, M.; Perrett, D. I.; Barraclough, N. E.

    2013-01-01

    Adaptation to facial characteristics, such as gender and viewpoint, has been shown to both bias our perception of faces and improve facial discrimination. In this study, we examined whether adapting to two levels of face trustworthiness improved sensitivity around the adapted level. Facial trustworthiness was manipulated by morphing between trustworthy and untrustworthy prototypes, each generated by morphing eight trustworthy and eight untrustworthy faces, respectively. In the first experiment, just-noticeable differences (JNDs) were calculated for an untrustworthy face after participants adapted to an untrustworthy face, a trustworthy face, or did not adapt. In the second experiment, the three conditions were identical, except that JNDs were calculated for a trustworthy face. In the third experiment we examined whether adapting to an untrustworthy male face improved discrimination to an untrustworthy female face. In all experiments, participants completed a two-interval forced-choice (2-IFC) adaptive staircase procedure, in which they judged which face was more untrustworthy. JNDs were derived from a psychometric function fitted to the data. Adaptation improved sensitivity to faces conveying the same level of trustworthiness when compared to no adaptation. When adapting to and discriminating around a different level of face trustworthiness there was no improvement in sensitivity and JNDs were equivalent to those in the no adaptation condition. The improvement in sensitivity was found to occur even when adapting to a face with different gender and identity. These results suggest that adaptation to facial trustworthiness can selectively enhance mechanisms underlying the coding of facial trustworthiness to improve perceptual sensitivity. These findings have implications for the role of our visual experience in the decisions we make about the trustworthiness of other individuals. PMID:23801979

  16. Adaptation improves face trustworthiness discrimination.

    Science.gov (United States)

    Keefe, B D; Dzhelyova, M; Perrett, D I; Barraclough, N E

    2013-01-01

    Adaptation to facial characteristics, such as gender and viewpoint, has been shown to both bias our perception of faces and improve facial discrimination. In this study, we examined whether adapting to two levels of face trustworthiness improved sensitivity around the adapted level. Facial trustworthiness was manipulated by morphing between trustworthy and untrustworthy prototypes, each generated by morphing eight trustworthy and eight untrustworthy faces, respectively. In the first experiment, just-noticeable differences (JNDs) were calculated for an untrustworthy face after participants adapted to an untrustworthy face, a trustworthy face, or did not adapt. In the second experiment, the three conditions were identical, except that JNDs were calculated for a trustworthy face. In the third experiment we examined whether adapting to an untrustworthy male face improved discrimination to an untrustworthy female face. In all experiments, participants completed a two-interval forced-choice (2-IFC) adaptive staircase procedure, in which they judged which face was more untrustworthy. JNDs were derived from a psychometric function fitted to the data. Adaptation improved sensitivity to faces conveying the same level of trustworthiness when compared to no adaptation. When adapting to and discriminating around a different level of face trustworthiness there was no improvement in sensitivity and JNDs were equivalent to those in the no adaptation condition. The improvement in sensitivity was found to occur even when adapting to a face with different gender and identity. These results suggest that adaptation to facial trustworthiness can selectively enhance mechanisms underlying the coding of facial trustworthiness to improve perceptual sensitivity. These findings have implications for the role of our visual experience in the decisions we make about the trustworthiness of other individuals.

  17. Adaptation improves face trustworthiness discrimination

    Directory of Open Access Journals (Sweden)

    Bruce D Keefe

    2013-06-01

    Full Text Available Adaptation to facial characteristics, such as gender and viewpoint, has been shown to both bias our perception of faces and improve facial discrimination. In this study, we examined whether adapting to two levels of face trustworthiness improved sensitivity around the adapted level. Facial trustworthiness was manipulated by morphing between trustworthy and untrustworthy prototypes, each generated by morphing eight trustworthy and eight untrustworthy faces respectively. In the first experiment, just-noticeable differences (JNDs were calculated for an untrustworthy face after participants adapted to an untrustworthy face, a trustworthy face, or did not adapt. In the second experiment, the three conditions were identical, except that JNDs were calculated for a trustworthy face. In the third experiment we examined whether adapting to an untrustworthy male face improved discrimination to an untrustworthy female face. In all experiments, participants completed a two-interval forced-choice adaptive staircase procedure, in which they judged which face was more untrustworthy. JNDs were derived from a psychometric function fitted to the data. Adaptation improved sensitivity to faces conveying the same level of trustworthiness when compared to no adaptation. When adapting to and discriminating around a different level of face trustworthiness there was no improvement in sensitivity and JNDs were equivalent to those in the no adaptation condition. The improvement in sensitivity was found to occur even when adapting to a face with different gender and identity. These results suggest that adaptation to facial trustworthiness can selectively enhance mechanisms underlying the coding of facial trustworthiness to improve perceptual sensitivity. These findings have implications for the role of our visual experience in the decisions we make about the trustworthiness of other individuals.

  18. Face-n-Food: Gender Differences in Tuning to Faces

    Science.gov (United States)

    Pavlova, Marina A.; Scheffler, Klaus; Sokolov, Alexander N.

    2015-01-01

    Faces represent valuable signals for social cognition and non-verbal communication. A wealth of research indicates that women tend to excel in recognition of facial expressions. However, it remains unclear whether females are better tuned to faces. We presented healthy adult females and males with a set of newly created food-plate images resembling faces (slightly bordering on the Giuseppe Arcimboldo style). In a spontaneous recognition task, participants were shown a set of images in a predetermined order from the least to most resembling a face. Females not only more readily recognized the images as a face (they reported resembling a face on images, on which males still did not), but gave on overall more face responses. The findings are discussed in the light of gender differences in deficient face perception. As most neuropsychiatric, neurodevelopmental and psychosomatic disorders characterized by social brain abnormalities are sex specific, the task may serve as a valuable tool for uncovering impairments in visual face processing. PMID:26154177

  19. Waste Electrical and Electronic Equipment

    DEFF Research Database (Denmark)

    Bigum, Marianne Kristine Kjærgaard; Christensen, Thomas Højlund

    2011-01-01

    Waste electrical and electronic equipment (WEEE) is one of the fastest growing special waste types with an estimated growth of 3–5% per year (Cui and Forssberg, 2003). WEEE is a very heterogeneous waste type that contains many compounds that are considered to be harmful to both humans and the env......Waste electrical and electronic equipment (WEEE) is one of the fastest growing special waste types with an estimated growth of 3–5% per year (Cui and Forssberg, 2003). WEEE is a very heterogeneous waste type that contains many compounds that are considered to be harmful to both humans...

  20. Mechanical (turbines and auxiliary equipment)

    CERN Document Server

    Sherry, A; Cruddace, AE

    2013-01-01

    Modern Power Station Practice, Volume 3: Mechanical (Turbines and Auxiliary Equipment) focuses on the development of turbines and auxiliary equipment used in power stations in Great Britain. Topics covered include thermodynamics and steam turbine theory; turbine auxiliary systems such as lubrication systems, feed water heating systems, and the condenser and cooling water plants. Miscellaneous station services, and pipework in power plants are also described. This book is comprised of five chapters and begins with an overview of thermodynamics and steam turbine theory, paying particular attenti

  1. Waste Electrical and Electronic Equipment

    DEFF Research Database (Denmark)

    Bigum, Marianne Kristine Kjærgaard; Christensen, Thomas Højlund

    2011-01-01

    Waste electrical and electronic equipment (WEEE) is one of the fastest growing special waste types with an estimated growth of 3–5% per year (Cui and Forssberg, 2003). WEEE is a very heterogeneous waste type that contains many compounds that are considered to be harmful to both humans and the env......Waste electrical and electronic equipment (WEEE) is one of the fastest growing special waste types with an estimated growth of 3–5% per year (Cui and Forssberg, 2003). WEEE is a very heterogeneous waste type that contains many compounds that are considered to be harmful to both humans...

  2. Integrated Detection, Tracking, and Recognition of Faces with Omnivideo Array in Intelligent Environments

    Directory of Open Access Journals (Sweden)

    Mohan M. Trivedi

    2008-04-01

    Full Text Available We present a multilevel system architecture for intelligent environments equipped with omnivideo arrays. In order to gain unobtrusive human awareness, real-time 3D human tracking as well as robust video-based face detection and tracking and face recognition algorithms are needed. We first propose a multiprimitive face detection and tracking loop to crop face videos as the front end of our face recognition algorithm. Both skin-tone and elliptical detections are used for robust face searching, and view-based face classification is applied to the candidates before updating the Kalman filters for face tracking. For video-based face recognition, we propose three decision rules on the facial video segments. The majority rule and discrete HMM (DHMM rule accumulate single-frame face recognition results, while continuous density HMM (CDHMM works directly with the PCA facial features of the video segment for accumulated maximum likelihood (ML decision. The experiments demonstrate the robustness of the proposed face detection and tracking scheme and the three streaming face recognition schemes with 99% accuracy of the CDHMM rule. We then experiment on the system interactions with single person and group people by the integrated layers of activity awareness. We also discuss the speech-aided incremental learning of new faces.

  3. Integrated Detection, Tracking, and Recognition of Faces with Omnivideo Array in Intelligent Environments

    Directory of Open Access Journals (Sweden)

    Huang KohsiaS

    2008-01-01

    Full Text Available Abstract We present a multilevel system architecture for intelligent environments equipped with omnivideo arrays. In order to gain unobtrusive human awareness, real-time 3D human tracking as well as robust video-based face detection and tracking and face recognition algorithms are needed. We first propose a multiprimitive face detection and tracking loop to crop face videos as the front end of our face recognition algorithm. Both skin-tone and elliptical detections are used for robust face searching, and view-based face classification is applied to the candidates before updating the Kalman filters for face tracking. For video-based face recognition, we propose three decision rules on the facial video segments. The majority rule and discrete HMM (DHMM rule accumulate single-frame face recognition results, while continuous density HMM (CDHMM works directly with the PCA facial features of the video segment for accumulated maximum likelihood (ML decision. The experiments demonstrate the robustness of the proposed face detection and tracking scheme and the three streaming face recognition schemes with 99% accuracy of the CDHMM rule. We then experiment on the system interactions with single person and group people by the integrated layers of activity awareness. We also discuss the speech-aided incremental learning of new faces.

  4. Learning to Discriminate Face Views

    Directory of Open Access Journals (Sweden)

    Fang Fang

    2011-05-01

    Full Text Available Although visual feature leaning has been well studied, we still know little about the mechanisms of perceptual learning of complex object. Here, human perceptual learning in discrimination of in-depth orientation of face view was studied using psychophysics, EEG and fMRI. We trained subjects to discriminate face orientations around a face view (i.e. 30° over eight daily sessions, which resulted in a significant improvement in sensitivity to the face view orientation. This improved sensitivity was highly specific to the trained orientation and persisted up to six months. Different from perceptual learning of simple visual features, this orientation-specific learning effect could completely transfer across changes in face size, visual field and face identity. A complete transfer also occurred between two partial face images that were mutually exclusive but constituted a complete face. However, the transfer of the learning effect between upright and inverted faces and between a face and a paperclip object was very weak. Before and after training, we measured EEG and fMRI BOLD signals responding to both the trained and the untrained face views. Analyses of ERPs and induced gamma activity showed that face view discrimination training led to a larger reduction of N170 latency at the left occipital-temporal area and a concurrent larger decrease of induced gamma activity at the left frontal area with the trained face view, compared with the untrained ones. BOLD signal amplitude and MVPA analyses showed that, in face-selective cortical areas, training did not lead to a significant amplitude change, but induced a more reliable spatial pattern of neural activity in the left FFA. These results suggest that the visual system had learned how to compute face orientation from face configural information more accurately and that a large amount of plastic changes took place at a level of higher visual processing where size-, location-, and identity

  5. Facing the Crises

    Directory of Open Access Journals (Sweden)

    Moira Baker

    2014-12-01

    Full Text Available Timely, provocative, and theoretically sophisticated, the essays comprising In the Face of Crises: Anglophone Literature in the Postmodern World situate their work amid several critical global concerns: the devastation wreaked by global capitalism following the worldwide financial crash, the financial sector’s totalizing grip upon the world economy, the challenge to traditional definitions of “human nature” and identity posed by technologies of the body and of warfare, the quest of indigenous communities for healing from the continuing traumatic effects of colonization, and the increasing corporatization of the academy as an apparatus of the neo-liberal state – to specify only a few. Edited by Professors Ljubica Matek and Jasna Poljak Rehlicki, these essays deploy a broad range of contemporary theories, representing recent developments in cultural studies, the new economic criticism, postcolonial film studies, feminism and gender studies, and the new historicism. The eleven essays selected by Matek and Rehlicki offer convincing support for their claim that humanistic research delving into Anglophone literature, far from being a “non-profitable” pursuit in an increasingly technologized society, affords clarifying insights into contemporary “economic, cultural, and social processes in the globalizing and globalized culture of the West” (ix.

  6. Face au risque

    CERN Document Server

    Grosse, Christian; November, Valérie

    2007-01-01

    Ce volume collectif sur le risque inaugure la collection L'ÉQUINOXE. Ancré dans l'histoire pour mesurer les continuités et les ruptures, il illustre la manière dont les sciences humaines évaluent et mesurent les enjeux collectifs du risque sur les plans politiques, scientifiques, énergétiques, juridiques et éthiques. Puisse-t-il nourrir la réflexion sur la culture et la prévention du risque. Ses formes épidémiques, écologiques, sociales, terroristes et militaires nourrissent les peurs actuelles, structurent les projets sécuritaires et constituent - sans doute - les défis majeurs à notre modernité. Dans la foulée de la richesse scientifique d'Equinoxe, L'ÉQUINOXE hérite de son esprit en prenant à son tour le pari de contribuer - non sans risque - à enrichir en Suisse romande et ailleurs le champ éditorial des sciences humaines dont notre société a besoin pour forger ses repères. Après Face au risque suivra cet automne Du sens des Lumières. (MICHEL PORRET Professeur Ordinaire à la F...

  7. 45 CFR 1326.21 - Application approval.

    Science.gov (United States)

    2010-10-01

    ..., DEPARTMENT OF HEALTH AND HUMAN SERVICES THE ADMINISTRATION ON AGING, OLDER AMERICANS PROGRAMS GRANTS TO INDIAN TRIBES FOR SUPPORT AND NUTRITION SERVICES § 1326.21 Application approval. (a) Approval of any...

  8. Face adaptation improves gender discrimination.

    Science.gov (United States)

    Yang, Hua; Shen, Jianhong; Chen, Juan; Fang, Fang

    2011-01-01

    Adaptation to a visual pattern can alter the sensitivities of neuronal populations encoding the pattern. However, the functional roles of adaptation, especially in high-level vision, are still equivocal. In the present study, we performed three experiments to investigate if face gender adaptation could affect gender discrimination. Experiments 1 and 2 revealed that adapting to a male/female face could selectively enhance discrimination for male/female faces. Experiment 3 showed that the discrimination enhancement induced by face adaptation could transfer across a substantial change in three-dimensional face viewpoint. These results provide further evidence suggesting that, similar to low-level vision, adaptation in high-level vision could calibrate the visual system to current inputs of complex shapes (i.e. face) and improve discrimination at the adapted characteristic.

  9. Holistic face training enhances face processing in developmental prosopagnosia.

    Science.gov (United States)

    DeGutis, Joseph; Cohan, Sarah; Nakayama, Ken

    2014-06-01

    Prosopagnosia has largely been regarded as an untreatable disorder. However, recent case studies using cognitive training have shown that it is possible to enhance face recognition abilities in individuals with developmental prosopagnosia. Our goal was to determine if this approach could be effective in a larger population of developmental prosopagnosics. We trained 24 developmental prosopagnosics using a 3-week online face-training program targeting holistic face processing. Twelve subjects with developmental prosopagnosia were assessed before and after training, and the other 12 were assessed before and after a waiting period, they then performed the training, and were then assessed again. The assessments included measures of front-view face discrimination, face discrimination with view-point changes, measures of holistic face processing, and a 5-day diary to quantify potential real-world improvements. Compared with the waiting period, developmental prosopagnosics showed moderate but significant overall training-related improvements on measures of front-view face discrimination. Those who reached the more difficult levels of training ('better' trainees) showed the strongest improvements in front-view face discrimination and showed significantly increased holistic face processing to the point of being similar to that of unimpaired control subjects. Despite challenges in characterizing developmental prosopagnosics' everyday face recognition and potential biases in self-report, results also showed modest but consistent self-reported diary improvements. In summary, we demonstrate that by using cognitive training that targets holistic processing, it is possible to enhance face perception across a group of developmental prosopagnosics and further suggest that those who improved the most on the training task received the greatest benefits.

  10. Holistic processing predicts face recognition.

    Science.gov (United States)

    Richler, Jennifer J; Cheung, Olivia S; Gauthier, Isabel

    2011-04-01

    The concept of holistic processing is a cornerstone of face-recognition research. In the study reported here, we demonstrated that holistic processing predicts face-recognition abilities on the Cambridge Face Memory Test and on a perceptual face-identification task. Our findings validate a large body of work that relies on the assumption that holistic processing is related to face recognition. These findings also reconcile the study of face recognition with the perceptual-expertise work it inspired; such work links holistic processing of objects with people's ability to individuate them. Our results differ from those of a recent study showing no link between holistic processing and face recognition. This discrepancy can be attributed to the use in prior research of a popular but flawed measure of holistic processing. Our findings salvage the central role of holistic processing in face recognition and cast doubt on a subset of the face-perception literature that relies on a problematic measure of holistic processing.

  11. Winning Faces Vary By Ideology

    DEFF Research Database (Denmark)

    Laustsen, Lasse; Petersen, Michael Bang

    2016-01-01

    for others. Utilizing research on ideological stereotypes and the determinants of facial preferences, we focus on the relationship between the facial dominance of the source and the ideology of the receiver. Across five studies, we demonstrate that a dominant face is a winning face when the audience...... is conservative but backfires and decreases success when the audience is liberal. On the other hand, a non-dominant face constitutes a winning face among liberal audiences but backfires among conservatives. These effects seemingly stem from deep-seated psychological responses and shape both the election...

  12. Study of Face Recognition Techniques

    Directory of Open Access Journals (Sweden)

    Sangeeta Kaushik

    2014-12-01

    Full Text Available A study of both face recognition and detection techniques is carried out using the algorithms like Principal Component Analysis (PCA, Kernel Principal Component Analysis (KPCA, Linear Discriminant Analysis (LDA and Line Edge Map (LEM. These algorithms show different rates of accuracy under different conditions. The automatic recognition of human faces presents a challenge to the pattern recognition community. Typically, human faces are different in shapes with minor similarity from person to person. Furthermore, lighting condition changes, facial expressions and pose variations further complicate the face recognition task as one of the difficult problems in pattern analysis.

  13. Strategy Guideline. HVAC Equipment Sizing

    Energy Technology Data Exchange (ETDEWEB)

    Burdick, Arlan [IBACOS, Inc., Pittsburgh, PA (United States)

    2012-02-01

    This guide describes the equipment selection of a split system air conditioner and furnace for an example house in Chicago, IL as well as a heat pump system for an example house in Orlando, FL. The required heating and cooling load information for the two example houses was developed in the Department of Energy Building America Strategy Guideline: Accurate Heating and Cooling Load Calculations.

  14. Lifting operations and lifting equipment

    NARCIS (Netherlands)

    Douwes, M.

    2013-01-01

    Lifting operations are inherent to many occupations in the construction industry. They can be performed manually or using lifting equipment. Both manual lifting and mechanical lifting operations can put construction workers at great risk of injury or health symptoms causing sick leave or disability.

  15. Database identifies FDA-approved drugs with potential to be repurposed for treatment of orphan diseases.

    Science.gov (United States)

    Xu, Kui; Coté, Timothy R

    2011-07-01

    Facing substantial obstacles to developing new therapies for rare diseases, some sponsors are looking to 'repurpose' drugs already approved for other conditions and use those therapies to treat rare diseases. In an effort to facilitate such repurposing and speed the delivery of new therapies to people who need them, we have established a new resource, the Rare Disease Repurposing Database (RDRD). The advantages of repurposed compounds include their demonstrated efficacy (in some clinical contexts), their observed toxicity profiles and their clearly described manufacturing controls. To create the RDRD, we matched the US Food and Drug Administration (FDA) orphan designation database to FDA drug and biological product approval lists. The RDRD lists 236 products that have received orphan status designation--that is, were found to be 'promising' for the treatment of a rare disease--and though not yet approved for marketing for that rare disease, they are already approved for marketing to treat some other disease or condition. The RDRD contains three tables: Orphan-designated products with at least one marketing approval for a common disease indication (N = 109); orphan-designated products with at least one marketing approval for a rare disease indication (N = 76); and orphan-designated products with marketing approvals for both common and rare disease indications (N = 51). While the data included in the database is a re-configuration/cross-indexing of information already released by the FDA, it offers sponsors a new tool for finding special opportunities to develop niche therapies for rare disease patients.

  16. 40 CFR 123.61 - Approval process.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 21 2010-07-01 2010-07-01 false Approval process. 123.61 Section 123... REQUIREMENTS Program Approval, Revision, and Withdrawal § 123.61 Approval process. (a) After determining that a...; and (6) Briefly outline the fundamental aspects of the State's proposed program, and the process...

  17. 40 CFR 145.31 - Approval process.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Approval process. 145.31 Section 145.31 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS (CONTINUED) STATE UIC PROGRAM REQUIREMENTS Program Approval, Revision and Withdrawal § 145.31 Approval process....

  18. 12 CFR 611.510 - Approval procedures.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Approval procedures. 611.510 Section 611.510 Banks and Banking FARM CREDIT ADMINISTRATION FARM CREDIT SYSTEM ORGANIZATION Transfer of Authorities § 611.510 Approval procedures. (a) Upon receipt of approval of a resolution by the Farm...

  19. 30 CFR 22.10 - Approval plate.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Approval plate. 22.10 Section 22.10 Mineral... MINING PRODUCTS PORTABLE METHANE DETECTORS § 22.10 Approval plate. (a) Attachment to be made by manufacturers. (1) Manufacturers shall attach, stamp, or mold an approval plate on each permissible methane...

  20. 30 CFR 20.13 - Approval plate.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Approval plate. 20.13 Section 20.13 Mineral... MINING PRODUCTS ELECTRIC MINE LAMPS OTHER THAN STANDARD CAP LAMPS § 20.13 Approval plate. The manufacturer shall attach, stamp, or mold an approval plate on the battery container or housing of each...

  1. 32 CFR 552.77 - Suspension approval.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 3 2010-07-01 2010-07-01 true Suspension approval. 552.77 Section 552.77 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY MILITARY RESERVATIONS AND....77 Suspension approval. The installation commander will personally approve all cases in...

  2. Teaching On-Line versus Face-to-Face.

    Science.gov (United States)

    Smith, Glenn Gordon; Ferguson, David; Caris, Mieke

    2002-01-01

    Investigates and describes the current instructor experience of teaching college courses over the Web versus in face-to-face formats in terms of teaching strategies, social issues, and media effects. Discusses communication styles, relationship between students and instructors, instructor workload, and discussion patterns, and proposes a model…

  3. Effects of aging on face identification and holistic face processing.

    Science.gov (United States)

    Konar, Yaroslav; Bennett, Patrick J; Sekuler, Allison B

    2013-08-09

    Several studies have shown that face identification accuracy is lower in older than younger adults. This effect of aging might be due to age differences in holistic processing, which is thought to be an important component of human face processing. Currently, however, there is conflicting evidence as to whether holistic face processing is impaired in older adults. The current study therefore re-examined this issue by measuring response accuracy in a 1-of-4 face identification task and the composite face effect (CFE), a common index of holistic processing, in older adults. Consistent with previous reports, we found that face identification accuracy was lower in older adults than in younger adults tested in the same task. We also found a significant CFE in older adults that was similar in magnitude to the CFE measured in younger subjects with the same task. Finally, we found that there was a significant positive correlation between the CFE and face identification accuracy. This last result differs from the results obtained in a previous study that used the same tasks and which found no evidence of an association between the CFE and face identification accuracy in younger adults. Furthermore, the age difference was found with subtraction-, regression-, and ratio-based estimates of the CFE. The current findings are consistent with previous claims that older adults rely more heavily on holistic processing to identify objects in conditions of limited processing resources.

  4. Registration of 3D Face Scans with Average Face Models

    NARCIS (Netherlands)

    Salah, A.A.; Alyuz, N.; Akarun, L.

    2008-01-01

    The accuracy of a 3D face recognition system depends on a correct registration that aligns the facial surfaces and makes a comparison possible. The best results obtained so far use a costly one-to-all registration approach, which requires the registration of each facial surface to all faces in the g

  5. Addressee Identification In Face-to-Face Meetings

    NARCIS (Netherlands)

    Jovanovic, N.; op den Akker, Hendrikus J.A.; Nijholt, Antinus; McCarthy, D.; Wintner, S.

    We present results on addressee identification in four-participants face-to-face meetings using Bayesian Network and Naive Bayes classifiers. First, we investigate how well the addressee of a dialogue act can be predicted based on gaze, utterance and conversational context features. Then, we explore

  6. Cyber- and Face-to-Face Bullying: Who Crosses Over?

    Science.gov (United States)

    Shin, Hwayeon Helene; Braithwaite, Valerie; Ahmed, Eliza

    2016-01-01

    A total of 3956 children aged 12-13 years who completed the Longitudinal Study of Australian Children (LSAC Wave 5) were studied about their experiences of traditional face-to-face bullying and cyberbullying in the last month. In terms of prevalence, sixty percent of the sample had been involved in traditional bullying as the victim and/or the…

  7. 21 CFR 58.61 - Equipment design.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Equipment design. 58.61 Section 58.61 Food and... PRACTICE FOR NONCLINICAL LABORATORY STUDIES Equipment § 58.61 Equipment design. Equipment used in the... of appropriate design and adequate capacity to function according to the protocol and shall...

  8. 40 CFR 792.61 - Equipment design.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 31 2010-07-01 2010-07-01 true Equipment design. 792.61 Section 792.61...) GOOD LABORATORY PRACTICE STANDARDS Equipment § 792.61 Equipment design. Equipment used in the... of appropriate design and adequate capacity to function according to the protocol and shall...

  9. Energy-related laboratory equipment (ERLE) guidelines

    Energy Technology Data Exchange (ETDEWEB)

    1995-01-01

    This document describes the Used Energy-Related Laboratory Equipment grants, and eligibility and procedures for participation. The document contains tables identifying typical equipment that may be requested, where to review ERLE equipment lists, and where to mail applications, a description of the eligible equipment grants access data system, and a copy of the ERLE grant application and instructions for its completion and submission.

  10. 21 CFR 606.60 - Equipment.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 7 2010-04-01 2010-04-01 false Equipment. 606.60 Section 606.60 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) BIOLOGICS CURRENT GOOD MANUFACTURING PRACTICE FOR BLOOD AND BLOOD COMPONENTS Equipment § 606.60 Equipment. (a) Equipment used in the collection, processing,...

  11. 7 CFR 58.626 - Packaging equipment.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Packaging equipment. 58.626 Section 58.626 Agriculture....626 Packaging equipment. Packaging equipment designed to mechanically fill and close single service... Standards for Equipment for Packaging Frozen Desserts and Cottage Cheese. Quality Specifications for...

  12. 14 CFR 27.1415 - Ditching equipment.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Ditching equipment. 27.1415 Section 27.1415... STANDARDS: NORMAL CATEGORY ROTORCRAFT Equipment Safety Equipment § 27.1415 Ditching equipment. (a) Emergency... accommodate one life preserver for each occupant for which certification for ditching is requested. (c)...

  13. 14 CFR 29.1415 - Ditching equipment.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Ditching equipment. 29.1415 Section 29.1415 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Equipment Safety Equipment § 29.1415 Ditching equipment....

  14. 46 CFR 197.460 - Diving equipment.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Diving equipment. 197.460 Section 197.460 Shipping COAST... GENERAL PROVISIONS Commercial Diving Operations Periodic Tests and Inspections of Diving Equipment § 197.460 Diving equipment. The diving supervisor shall insure that the diving equipment designated for...

  15. 40 CFR 160.61 - Equipment design.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Equipment design. 160.61 Section 160... LABORATORY PRACTICE STANDARDS Equipment § 160.61 Equipment design. Equipment used in the generation... appropriate design and adequate capacity to function according to the protocol and shall be suitably located...

  16. Hunan Rare Earth Group Approved

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    <正>Following Guangdong,Guangxi,Fujian and Jiangxi,Hunan announced that it would consolidate its rare earth resources-the consolidation plan of Hunan Rare Earth Group has been approved. Consolidation of the rare earth industry of south China is in full swing.According to "Several Opinions of the State Council on Promoting the Sustainable and Healthy Development of Rare Earth Industry"(hereinafter referred to as "Several Opinions")released in 2011,

  17. Nelfinavir: fourth protease inhibitor approved.

    Science.gov (United States)

    1997-01-01

    The Food and Drug Administration (FDA) has granted accelerated approval to nelfinavir in both adult and pediatric formulations. Agouron, the manufacturer, used innovative computerized drug design techniques to discover, design, and refine the nelfinavir molecule. Nelfinavir is marketed under the trade name Viracept, and costs $5,000 per year. Early clinical trials find it to be as powerful as the other protease inhibitors, but with a different resistance profile. The drug has relatively few drug indications; however, several compounds have been contraindicated.

  18. Finding Hope in the Face-to-Face.

    Science.gov (United States)

    Edgoose, Jennifer Y C; Edgoose, Julian M

    2017-05-01

    What does it mean to look into the face of a patient who looks back? Face-to-face encounters are at the heart of the patient-clinician relationship but their singular significance is often lost amid the demands of today's high-tech, metric-driven health care systems. Using the framework provided by the philosopher and Holocaust survivor Emmanuel Levinas, the authors explore the unique responsibility and potential for hope found only in face-to-face encounters. Revisiting this most fundamental attribute of medicine is likely our greatest chance to reclaim who we are as clinicians and why we do what we do. © 2017 Annals of Family Medicine, Inc.

  19. Leapfrog Technology to Standardize Equipment and System Installation, Section 9 and 10 - Review and Approval Process

    Science.gov (United States)

    1999-09-01

    global” SCF in the analysis. Using the ASSHTO Category C curve, a link is provided between the hot-spot approach and the nominal stress approach. The...be assessed by using the hot-spot stress range at ¼ in. (5 mm) from the weld toe and the ASSHTO Category C design curve. The relative resistance of

  20. 42 CFR 84.33 - Approval labels and markings; approval of contents; use.

    Science.gov (United States)

    2010-10-01

    ... Approval and Disapproval § 84.33 Approval labels and markings; approval of contents; use. (a) Full-scale... at the following locations: Respirator type Label type Location Self-contained breathing apparatus... to whom it is issued to maintain or cause to be maintained the approved quality control sampling...

  1. Forensic Face Recognition: A Survey

    NARCIS (Netherlands)

    Ali, Tauseef; Veldhuis, Raymond; Spreeuwers, Luuk

    2010-01-01

    Beside a few papers which focus on the forensic aspects of automatic face recognition, there is not much published about it in contrast to the literature on developing new techniques and methodologies for biometric face recognition. In this report, we review forensic facial identification which is t

  2. Age-invariant face recognition.

    Science.gov (United States)

    Park, Unsang; Tong, Yiying; Jain, Anil K

    2010-05-01

    One of the challenges in automatic face recognition is to achieve temporal invariance. In other words, the goal is to come up with a representation and matching scheme that is robust to changes due to facial aging. Facial aging is a complex process that affects both the 3D shape of the face and its texture (e.g., wrinkles). These shape and texture changes degrade the performance of automatic face recognition systems. However, facial aging has not received substantial attention compared to other facial variations due to pose, lighting, and expression. We propose a 3D aging modeling technique and show how it can be used to compensate for the age variations to improve the face recognition performance. The aging modeling technique adapts view-invariant 3D face models to the given 2D face aging database. The proposed approach is evaluated on three different databases (i.g., FG-NET, MORPH, and BROWNS) using FaceVACS, a state-of-the-art commercial face recognition engine.

  3. Newborns' Mooney-Face Perception

    Science.gov (United States)

    Leo, Irene; Simion, Francesca

    2009-01-01

    The aim of this study is to investigate whether newborns detect a face on the basis of a Gestalt representation based on first-order relational information (i.e., the basic arrangement of face features) by using Mooney stimuli. The incomplete 2-tone Mooney stimuli were used because they preclude focusing both on the local features (i.e., the fine…

  4. PrimeFaces beginner's guide

    CERN Document Server

    Reddy, K Siva Prasad

    2013-01-01

    A guide for beginner's with step-by-step instructions and an easy-to-follow approach.PrimeFaces Beginners Guide is a simple and effective guide for beginners, wanting to learn and implement PrimeFaces in their JSF-based applications. Some basic JSF and jQuery skills are required before you start working through the book.

  5. Parallel Processing in Face Perception

    Science.gov (United States)

    Martens, Ulla; Leuthold, Hartmut; Schweinberger, Stefan R.

    2010-01-01

    The authors examined face perception models with regard to the functional and temporal organization of facial identity and expression analysis. Participants performed a manual 2-choice go/no-go task to classify faces, where response hand depended on facial familiarity (famous vs. unfamiliar) and response execution depended on facial expression…

  6. Side-View Face Recognition

    NARCIS (Netherlands)

    Santemiz, Pinar; Spreeuwers, Luuk J.; Veldhuis, Raymond N.J.; Biggelaar , van den Olivier

    2011-01-01

    As a widely used biometrics, face recognition has many advantages such as being non-intrusive, natural and passive. On the other hand, in real-life scenarios with uncontrolled environment, pose variation up to side-view positions makes face recognition a challenging work. In this paper we discuss th

  7. Modeling Social Perception of Faces

    NARCIS (Netherlands)

    Todorov, A.T.; Oosterhof, N.N.

    2011-01-01

    The face is our primary source of visual information for identifying people and reading their emotional and mental states. With the exception of prosopagnosics (who are unable to recognize faces) and those suffering from such disorders of social cognition as autism, people are extremely adept at the

  8. Priming with threatening faces modulates the self-face advantage by enhancing the other-face processing rather than suppressing the self-face processing.

    Science.gov (United States)

    Guan, Lili; Qi, Mingming; Li, Haijiang; Hitchman, Glenn; Yang, Juan; Liu, Yijun

    2015-05-22

    Social emotional information influences self-processing in everyday activities, but few researchers have investigated this process. The current ERP study adopted a prime paradigm to investigate how socially threatening faces impact on the self-face processing advantage. After being primed with emotional faces (happy, angry or neutral), participants judged whether the target face (self, friend, and stranger) was familiar or unfamiliar. Results showed an interaction effect between the prime face and the target face at posterior P3, suggesting that after priming with happy and neutral faces, self-faces elicited larger P3 amplitudes than friend-faces and stranger-faces; however, after priming with angry faces, the P3 amplitudes were not significantly different between self-face and friend-face. Moreover, the P3 amplitudes of self-faces did not differ between priming with angry and neutral faces; however, the P3 amplitude of both friend-faces and stranger-faces showed enhanced responses after priming with angry faces compared to priming with neutral faces. We suggest that the self-face processing advantage (self vs. friend) could be weakened by priming with threatening faces, through enhancement of the other-faces processing rather than suppression of self-faces processing in angry vs. neutral face prime.

  9. Emotion-independent face recognition

    Science.gov (United States)

    De Silva, Liyanage C.; Esther, Kho G. P.

    2000-12-01

    Current face recognition techniques tend to work well when recognizing faces under small variations in lighting, facial expression and pose, but deteriorate under more extreme conditions. In this paper, a face recognition system to recognize faces of known individuals, despite variations in facial expression due to different emotions, is developed. The eigenface approach is used for feature extraction. Classification methods include Euclidean distance, back propagation neural network and generalized regression neural network. These methods yield 100% recognition accuracy when the training database is representative, containing one image representing the peak expression for each emotion of each person apart from the neutral expression. The feature vectors used for comparison in the Euclidean distance method and for training the neural network must be all the feature vectors of the training set. These results are obtained for a face database consisting of only four persons.

  10. Effective indexing for face recognition

    Science.gov (United States)

    Sochenkov, I.; Sochenkova, A.; Vokhmintsev, A.; Makovetskii, A.; Melnikov, A.

    2016-09-01

    Face recognition is one of the most important tasks in computer vision and pattern recognition. Face recognition is useful for security systems to provide safety. In some situations it is necessary to identify the person among many others. In this case this work presents new approach in data indexing, which provides fast retrieval in big image collections. Data indexing in this research consists of five steps. First, we detect the area containing face, second we align face, and then we detect areas containing eyes and eyebrows, nose, mouth. After that we find key points of each area using different descriptors and finally index these descriptors with help of quantization procedure. The experimental analysis of this method is performed. This paper shows that performing method has results at the level of state-of-the-art face recognition methods, but it is also gives results fast that is important for the systems that provide safety.

  11. Genetic specificity of face recognition.

    Science.gov (United States)

    Shakeshaft, Nicholas G; Plomin, Robert

    2015-10-13

    Specific cognitive abilities in diverse domains are typically found to be highly heritable and substantially correlated with general cognitive ability (g), both phenotypically and genetically. Recent twin studies have found the ability to memorize and recognize faces to be an exception, being similarly heritable but phenotypically substantially uncorrelated both with g and with general object recognition. However, the genetic relationships between face recognition and other abilities (the extent to which they share a common genetic etiology) cannot be determined from phenotypic associations. In this, to our knowledge, first study of the genetic associations between face recognition and other domains, 2,000 18- and 19-year-old United Kingdom twins completed tests assessing their face recognition, object recognition, and general cognitive abilities. Results confirmed the substantial heritability of face recognition (61%), and multivariate genetic analyses found that most of this genetic influence is unique and not shared with other cognitive abilities.

  12. Development and Study of Hard-Facing Materials on the Base of Heat-Resisting High-Hardness Steels for Plasma-Jet Hard- Facing in Shielding-Doping Nitrogen Atmosphere

    Science.gov (United States)

    Malushin, N. N.; Kovalev, A. P.; Valuev, D. V.; Shats, E. A.; Borovikov, I. F.

    2016-08-01

    The authors develop hard-facing materials on the base of heat-resisting highhardness steels for plasma-jet hard-facing in nitrogen atmosphere for manufacturing parts of mining and metallurgic equipment which significantly simplify the production process and effect a saving when producing bimetallic parts and tools.

  13. Learning faces: similar comparator faces do not improve performance.

    Directory of Open Access Journals (Sweden)

    Scott P Jones

    Full Text Available Recent evidence indicates that comparison of two similar faces can aid subsequent discrimination between them. However, the fact that discrimination between two faces is facilitated by comparing them directly does not demonstrate that comparison produces a general improvement in the processing of faces. It remains an open question whether the opportunity to compare a "target" face to similar faces can facilitate the discrimination of the exposed target face from other nonexposed faces. In Experiment 1, selection of a target face from an array of novel foils was not facilitated by intermixed exposure to the target and comparators of the same sex. Experiment 2 also found no advantage for similar comparators (morphed towards the target over unmorphed same sex comparators, or over repeated target exposure alone. But all repeated exposure conditions produced better performance than a single brief presentation of the target. Experiment 3 again demonstrated that repeated exposure produced equivalent learning in same sex and different sex comparator conditions, and also showed that increasing the number of same sex or different sex comparators failed to improve identification. In all three experiments, exposure to a target alongside similar comparators failed to support selection of the target from novel test stimuli to a greater degree than exposure alongside dissimilar comparators or repeated target exposure alone. The current results suggest that the facilitatory effects of comparison during exposure may be limited to improving discrimination between exposed stimuli, and thus our results do not support the idea that providing the opportunity for comparison is a practical means for improving face identification.

  14. NATO ARI on Ergonomic Data for Equipment Design

    CERN Document Server

    1984-01-01

    For many years ergonomists and human engineering specialists have made significant contributions to the solution of problems faced in the area of human labour and to the introduction of their research results and field experience into the process of equipment design. However, the rapid increase in complexity of equipment in use as well as in development demonstrates the necessity of broaden­ ing the point of view continuously. The workshop held in Munich from March 22nd to March 26th, 1982, was an excellent opportunity for the participants to discuss their respective interests and their interpretation of needs for future research. The workshop was sponsored by the Human Factors Special Programme Panel of the Scientific Affairs Division of NATO. This sponsorship, together with the helpful assistance rendered by Drs. Bayraktar, Kroemer, and Sanders, is gratefully acknowledged. This volume contains the papers presented during the workshop. All these papers are directly related to the general aim: the ex­ chang...

  15. Used energy-related laboratory equipment grant program for institutions of higher learning. Eligible equipment catalog

    Energy Technology Data Exchange (ETDEWEB)

    1994-07-01

    This is a listing of energy related equipment available through the Energy-Related Laboratory Equipment Grant Program which grants used equipment to institutions of higher education for energy-related research. Information included is an overview of the program, how to apply for a grant of equipment, eligibility requirements, types of equipment available, and the costs for the institution.

  16. Waterway Equipment - Boat, Barge, Motor

    Science.gov (United States)

    2012-09-25

    and service systems; deck and special machinery; and hoisting gear and equipment are operated and monitored throughout the entire test period...loaded statically to 200 percent of the ramp design hoist condition. This load is held for a minimum of three minutes. 4.6.6.2 Data Required...the contents fall short of filling a container. Wake The body of water that tends to follow a ship. It is set in motion by the friction with the

  17. Profitability Versus Construction Equipment Maintenance

    Science.gov (United States)

    2010-05-01

    E7(/(3+21(180%(5 ,QFOXGHDUHDFRGH XX-05-2010 Master’s Thesis DEC 2009 - MAY 2010 Profitability Versus Construction Equipment Maintenance...optimization of a perceived profit . This project recommends a decision support model that can be used by private and public entities alike to determine the...best fir acquisition method between rent-lease-buy and guidance for profitability optimization. Methods of life cycle cost estimating and decision

  18. [Equipment and technology in robotics].

    Science.gov (United States)

    Murphy, Declan; Challacombe, Ben; Nedas, Tim; Elhage, Oussama; Althoefer, Kaspar; Seneviratne, Lakmal; Dasgupta, Prokar

    2007-05-01

    We review the evolution and current status of robotic equipment and technology in urology. We also describe future developments in the key areas of virtual reality simulation, mechatronics and nanorobotics. The history of robotic technology is reviewed and put into the context of current systems. Experts in the associated fields of nanorobotics, mechatronics and virtual reality simulation simulation review the important future developments in these areas.

  19. Strategy Guideline: HVAC Equipment Sizing

    Energy Technology Data Exchange (ETDEWEB)

    Burdick, A.

    2012-02-01

    The heating, ventilation, and air conditioning (HVAC) system is arguably the most complex system installed in a house and is a substantial component of the total house energy use. A right-sized HVAC system will provide the desired occupant comfort and will run efficiently. This Strategy Guideline discusses the information needed to initially select the equipment for a properly designed HVAC system. Right-sizing of an HVAC system involves the selection of equipment and the design of the air distribution system to meet the accurate predicted heating and cooling loads of the house. Right-sizing the HVAC system begins with an accurate understanding of the heating and cooling loads on a space; however, a full HVAC design involves more than just the load estimate calculation - the load calculation is the first step of the iterative HVAC design procedure. This guide describes the equipment selection of a split system air conditioner and furnace for an example house in Chicago, IL as well as a heat pump system for an example house in Orlando, Florida. The required heating and cooling load information for the two example houses was developed in the Department of Energy Building America Strategy Guideline: Accurate Heating and Cooling Load Calculations.

  20. CERN computing equipment for Senegal

    CERN Multimedia

    Anaïs Schaeffer

    2014-01-01

    On 26 May, CERN once again had the honour of donating computing equipment to a foreign institute.   This time, around 100 servers and five network hubs were sent to Senegal, making it the seventh country, after Morocco, Ghana, Bulgaria, Serbia, Egypt and the Philippines, to receive a donation of computing equipment from the Organization. The official ceremony was held at CERN on 26 May in the presence of the Director-General, Rolf Heuer, and Senegal's ambassador to Geneva, Fodé Seck, who both expressed their enthusiasm for the project. The equipment is intended for Cheikh Anta Diop University (UCAD) in Dakar and will be of particular use to students attending the African School of Fundamental Physics and its Applications (ASP 2014) taking place from 3 to 23 August, for which CERN is a partner. The ASP allows a large number of African students to hone their skills in high-energy physics and to forge professional links with fellow physicists in Africa and Europe. ...

  1. Data center equipment location and monitoring system

    DEFF Research Database (Denmark)

    2011-01-01

    , and runs a software application program that communicates with the equipment rack controllers. The software application program of the central control computer stores IDs of the equipment rack controllers and each of its connected electronic ID tags in a database.; The software application program......A data center equipment location system includes both hardware and software to provide for location, monitoring, security and identification of servers and other equipment in equipment racks. The system provides a wired alternative to the wireless RFID tag system by using electronic ID tags...... connected to each piece of equipment, each electronic ID tag connected directly by wires to a equipment rack controller on the equipment rack. The equipment rack controllers then link over a local area network to a central control computer. The central control computer provides an operator interface...

  2. The New Drug Conditional Approval Process in China: Challenges and Opportunities.

    Science.gov (United States)

    Yao, Xuefang; Ding, Jinxi; Liu, Yingfang; Li, Penghui

    2017-05-01

    Our aim was to characterize the newly established new drug conditional approval process in China and discuss the challenges and opportunities with respect to new drug research and development and registration. We examined the new approval program through literature review, law analysis, and data analysis. Data were derived from published materials, such as journal articles, government publications, press releases, and news articles, along with statistical data from INSIGHT-China Pharma Databases, the China Food and Drug Administration website, the Center for Drug Evaluation website, the US Food and Drug Administration website, and search results published by Google. Currently, there is a large backlog of New Drug Applications in China, mainly because of the prolonged review time at the China Food and Drug Administration, resulting in a lag in drug approvals. In 2015, the Chinese government implemented the drug review and registration system reform and tackled this issue through various approaches, such as setting up a drug review fee system, adjusting the drug registration classification, and establishing innovative review pathways, including the conditional approval process. In Europe and the United States, programs comparable to the conditional approval program in China have been well developed. The conditional approval program recently established in China is an expedited new drug approval process that is expected to affect new drug development at home and abroad and profoundly influence the public health and the pharmaceutical industry in China. Like any program in its initial stage, the conditional approval program is facing several challenges, including setting up a robust system, formatting new drug clinical research requirements, and improving the regulatory agency's function for drug review and approval. The program is expected to evolve and improve as part of the government mandate of the drug registration system reform. Copyright © 2017 Elsevier HS

  3. 75 FR 52033 - Rigging Equipment for Material Handling; Extension of the Office of Management and Budget's (OMB...

    Science.gov (United States)

    2010-08-24

    ... Occupational Safety and Health Administration Rigging Equipment for Material Handling; Extension of the Office of Management and Budget's (OMB) Approval of Information Collection (Paperwork) Requirements AGENCY... solicits public comments concerning its proposal to extend the Office of Management and Budget's (OMB...

  4. 30 CFR 75.1911 - Fire suppression systems for diesel-powered equipment and fuel transportation units.

    Science.gov (United States)

    2010-07-01

    ... dry chemical type (ABC) fire suppression system listed or approved by a nationally recognized... in the compartment within reach of the operator. (f) The fire suppression system shall remain... where permissible electric equipment is required shall be permissible or intrinsically safe and...

  5. Modeling human dynamics of face-to-face interaction networks

    CERN Document Server

    Starnini, Michele; Pastor-Satorras, Romualdo

    2013-01-01

    Face-to-face interaction networks describe social interactions in human gatherings, and are the substrate for processes such as epidemic spreading and gossip propagation. The bursty nature of human behavior characterizes many aspects of empirical data, such as the distribution of conversation lengths, of conversations per person, or of inter-conversation times. Despite several recent attempts, a general theoretical understanding of the global picture emerging from data is still lacking. Here we present a simple model that reproduces quantitatively most of the relevant features of empirical face-to-face interaction networks. The model describes agents which perform a random walk in a two dimensional space and are characterized by an attractiveness whose effect is to slow down the motion of people around them. The proposed framework sheds light on the dynamics of human interactions and can improve the modeling of dynamical processes taking place on the ensuing dynamical social networks.

  6. Temporal networks of face-to-face human interactions

    CERN Document Server

    Barrat, Alain

    2013-01-01

    The ever increasing adoption of mobile technologies and ubiquitous services allows to sense human behavior at unprecedented levels of details and scale. Wearable sensors are opening up a new window on human mobility and proximity at the finest resolution of face-to-face proximity. As a consequence, empirical data describing social and behavioral networks are acquiring a longitudinal dimension that brings forth new challenges for analysis and modeling. Here we review recent work on the representation and analysis of temporal networks of face-to-face human proximity, based on large-scale datasets collected in the context of the SocioPatterns collaboration. We show that the raw behavioral data can be studied at various levels of coarse-graining, which turn out to be complementary to one another, with each level exposing different features of the underlying system. We briefly review a generative model of temporal contact networks that reproduces some statistical observables. Then, we shift our focus from surface ...

  7. Ethical considerations in face transplantation.

    Science.gov (United States)

    Brown, Charles S; Gander, Brian; Cunningham, Michael; Furr, Allen; Vasilic, Dalibor; Wiggins, Osborne; Banis, Joseph C; Vossen, Marieke; Maldonado, Claudio; Perez-Abadia, Gustavo; Barker, John H

    2007-10-01

    Human face transplantation is now a clinical reality. The surgical techniques necessary to perform these procedures have been used routinely in reconstructive microsurgery for many years. From an immunological standpoint since face and hand contain mostly the same tissues it is reasonable to assume that the same immunosuppressive regimen found to be effective in human hand transplants should also work in face transplantation. It is the ethical issues associated with the risks and benefits of performing facial transplantation that have posed the greatest challenges leading up to performing this new procedure. In this editorial, we will review some of the main events that have led to the recently performed human face transplants, specifically focusing on the key ethical issues at the center of this debate. We will discuss how the research and clinical experience in human hand transplantation laid the foundation for performing face transplantation and describe the research and the ethical guidelines upon which a team at the University of Louisville based their position "to move ahead" in spite of much criticism. Finally we will outline some of the key arguments against face transplantation, and conclude with a discussion on what comes next now that the first human face transplants have been performed.

  8. Multithread Face Recognition in Cloud

    Directory of Open Access Journals (Sweden)

    Dakshina Ranjan Kisku

    2016-01-01

    Full Text Available Faces are highly challenging and dynamic objects that are employed as biometrics evidence in identity verification. Recently, biometrics systems have proven to be an essential security tools, in which bulk matching of enrolled people and watch lists is performed every day. To facilitate this process, organizations with large computing facilities need to maintain these facilities. To minimize the burden of maintaining these costly facilities for enrollment and recognition, multinational companies can transfer this responsibility to third-party vendors who can maintain cloud computing infrastructures for recognition. In this paper, we showcase cloud computing-enabled face recognition, which utilizes PCA-characterized face instances and reduces the number of invariant SIFT points that are extracted from each face. To achieve high interclass and low intraclass variances, a set of six PCA-characterized face instances is computed on columns of each face image by varying the number of principal components. Extracted SIFT keypoints are fused using sum and max fusion rules. A novel cohort selection technique is applied to increase the total performance. The proposed protomodel is tested on BioID and FEI face databases, and the efficacy of the system is proven based on the obtained results. We also compare the proposed method with other well-known methods.

  9. JCE Online: Equipment Buyers Guide

    Science.gov (United States)

    Holmes, Jon L.

    1999-01-01

    The Equipment Buyers Guide was edited by Jo Rita Jordan. The new Equipment Buyers Guide, bound into the back of this issue, is also a new resource of JCE Internet. This resource provides an online source for the information contained in the printed guide. Placing this information online allows us to regularly update it and to provide live links to the suppliers' WWW sites. The organization of the online version parallels that of the print version. There is an alphabetical list of suppliers and a categorical listing. Links to these lists are provided on every page in the left-hand navigation bar. To quickly find information about a particular supplier, you click Supplier List, click the letter that begins the supplier's name, and scroll through the list to find the supplier. To find which suppliers provide a particular type of instrument or equipment, use the Categories link; click the category of the equipment you are looking for and then click the link to a supplier. You will then be taken to an alphabetical supplier listing page where you can scroll until you find the particular supplier of the item for which you are looking. Once you have found a supplier, the online Equipment Buyers Guide gives you the traditional contact information. But in addition, you also get one-click access to the WWW sites of the suppliers that have them. Depending on the site, you should be able to find information about the items that you seek and may even be able to order the items online! We think that you will find the online version of the Equipment Buyers Guide useful. To make it more useful, please send your suggestions, any errors or omissions you find, and any additional categories to the editor at jjordan@world.std.com The online Equipment Buyers Guide can be found at JCE Online at http://JChemEd.chem.wisc.edu/JCEWWW/Resources/EBG/ JCE Online in '99 JCE Online is your online source of "all things JCE". In order to provide you with an even more useful online resource, JCE

  10. Repurposing of approved cardiovascular drugs.

    Science.gov (United States)

    Ishida, Junichi; Konishi, Masaaki; Ebner, Nicole; Springer, Jochen

    2016-09-20

    Research and development of new drugs requires both long time and high costs, whereas safety and tolerability profiles make the success rate of approval very low. Drug repurposing, applying known drugs and compounds to new indications, has been noted recently as a cost-effective and time-unconsuming way in developing new drugs, because they have already been proven safe in humans. In this review, we discuss drug repurposing of approved cardiovascular drugs, such as aspirin, beta-blockers, angiotensin converting enzyme inhibitors, angiotensin II receptor blockers, cardiac glycosides and statins. Regarding anti-tumor activities of these agents, a number of experimental studies have demonstrated promising pleiotropic properties, whereas all clinical trials have not shown expected results. In pathological conditions other than cancer, repurposing of cardiovascular drugs is also expanding. Numerous experimental studies have reported possibilities of drug repurposing in this field and some of them have been tried for new indications ('bench to bedside'), while unexpected results of clinical studies have given hints for drug repurposing and some unknown mechanisms of action have been demonstrated by experimental studies ('bedside to bench'). The future perspective of experimental and clinical studies using cardiovascular drugs are also discussed.

  11. Bracing Zonohedra With Special Faces

    Directory of Open Access Journals (Sweden)

    Nagy Gyula

    2015-12-01

    Full Text Available The analysis of simpler preliminary design gives useful input for more complicated three-dimensional building frame structure. A zonohedron, as a preliminary structure of design, is a convex polyhedron for which each face possesses central symmetry. We considered zonohedron as a special framework with the special assumption that the polygonal faces can be deformed in such a way that faces remain planar and centrally symmetric, moreover the length of all edges remains unchanged. Introducing some diagonal braces we got a new mechanism. This paper deals with the flexibility of this kind of mechanisms, and investigates the rigidity of the braced framework. The flexibility of the framework can be characterized by some vectors, which represent equivalence classes of the edges. A necessary and sufficient condition for the rigidity of the braced rhombic face zonohedra is posed. A real mechanical construction, based on two simple elements, provides a CAD prototype of these new mechanisms.

  12. Face Recognition using Curvelet Transform

    CERN Document Server

    Cohen, Rami

    2011-01-01

    Face recognition has been studied extensively for more than 20 years now. Since the beginning of 90s the subject has became a major issue. This technology is used in many important real-world applications, such as video surveillance, smart cards, database security, internet and intranet access. This report reviews recent two algorithms for face recognition which take advantage of a relatively new multiscale geometric analysis tool - Curvelet transform, for facial processing and feature extraction. This transform proves to be efficient especially due to its good ability to detect curves and lines, which characterize the human's face. An algorithm which is based on the two algorithms mentioned above is proposed, and its performance is evaluated on three data bases of faces: AT&T (ORL), Essex Grimace and Georgia-Tech. k-nearest neighbour (k-NN) and Support vector machine (SVM) classifiers are used, along with Principal Component Analysis (PCA) for dimensionality reduction. This algorithm shows good results, ...

  13. Face Recognition in Various Illuminations

    Directory of Open Access Journals (Sweden)

    Saurabh D. Parmar,

    2014-05-01

    Full Text Available Face Recognition (FR under various illuminations is very challenging. Normalization technique is useful for removing the dimness and shadow from the facial image which reduces the effect of illumination variations still retaining the necessary information of the face. The robust local feature extractor which is the gray-scale invariant texture called Local Binary Pattern (LBP is helpful for feature extraction. K-Nearest Neighbor classifier is utilized for the purpose of classification and to match the face images from the database. Experimental results were based on Yale-B database with three different sub categories. The proposed method has been tested to robust face recognition in various illumination conditions. Extensive experiment shows that the proposed system can achieve very encouraging performance in various illumination environments.

  14. Similarity measures for face recognition

    CERN Document Server

    Vezzetti, Enrico

    2015-01-01

    Face recognition has several applications, including security, such as (authentication and identification of device users and criminal suspects), and in medicine (corrective surgery and diagnosis). Facial recognition programs rely on algorithms that can compare and compute the similarity between two sets of images. This eBook explains some of the similarity measures used in facial recognition systems in a single volume. Readers will learn about various measures including Minkowski distances, Mahalanobis distances, Hansdorff distances, cosine-based distances, among other methods. The book also summarizes errors that may occur in face recognition methods. Computer scientists "facing face" and looking to select and test different methods of computing similarities will benefit from this book. The book is also useful tool for students undertaking computer vision courses.

  15. Covert Face Recognition without Prosopagnosia

    Directory of Open Access Journals (Sweden)

    H. D. Ellis

    1993-01-01

    Full Text Available An experiment is reported where subjects were presented with familiar or unfamiliar faces for supraliminal durations or for durations individually assessed as being below the threshold for recognition. Their electrodermal responses to each stimulus were measured and the results showed higher peak amplitude skin conductance responses for familiar than for unfamiliar faces, regardless of whether they had been displayed supraliminally or subliminally. A parallel is drawn between elevated skin conductance responses to subliminal stimuli and findings of covert recognition of familiar faces in prosopagnosic patients, some of whom show increased electrodermal activity (EDA to previously familiar faces. The supraliminal presentation data also served to replicate similar work by Tranel et al (1985. The results are considered alongside other data indicating the relation between non-conscious, “automatic” aspects of normal visual information processing and abilities which can be found to be preserved without awareness after brain injury.

  16. More Than a Pretty Face

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    The various facial make up designs in the Sichuan Opera are Chinese art treasures With the flick of a wrist,the intricate patterns painted on the opera performer’s face magically shift;the audience,awed

  17. Face recognition using Krawtchouk moment

    Indian Academy of Sciences (India)

    J Sheeba Rani; D Devaraj

    2012-08-01

    Feature extraction is one of the important tasks in face recognition. Moments are widely used feature extractor due to their superior discriminatory power and geometrical invariance. Moments generally capture the global features of the image. This paper proposes Krawtchouk moment for feature extraction in face recognition system, which has the ability to extract local features from any region of interest. Krawtchouk moment is used to extract both local features and global features of the face. The extracted features are fused using summed normalized distance strategy. Nearest neighbour classifier is employed to classify the faces. The proposed method is tested using ORL and Yale databases. Experimental results show that the proposed method is able to recognize images correctly, even if the images are corrupted with noise and possess change in facial expression and tilt.

  18. Comparison of face-to-face versus email guided self-help for binge eating: study protocol for a randomised controlled trial.

    Science.gov (United States)

    Jenkins, Paul E; Luck, Amy; Burrows, Alison; Boughton, Nicky

    2014-05-22

    Guided self-help is a recommended first-step treatment for bulimia nervosa, binge eating disorder and atypical variants of these disorders. Further research is needed to compare guided self-help that is delivered face-to-face versus via email. This clinical trial uses a randomised, controlled design to investigate the effectiveness of providing guided self-help either face-to-face or via e-mail, also using a delayed treatment control condition. At least 17 individuals are required per group, giving a minimum N of 51. Symptom outcomes will be assessed and estimates of cost-effectiveness made. Results are proposed to be disseminated locally and internationally (through submission to conferences and peer-reviewed journals), and will hopefully inform local service provision. The trial has been approved by an ethics review board and was registered with ClinicalTrials.gov NCT01832792 on 9 April 2013.

  19. 3D Face Apperance Model

    DEFF Research Database (Denmark)

    Lading, Brian; Larsen, Rasmus; Astrom, K

    2006-01-01

    We build a 3D face shape model, including inter- and intra-shape variations, derive the analytical Jacobian of its resulting 2D rendered image, and show example of its fitting performance with light, pose, id, expression and texture variations......We build a 3D face shape model, including inter- and intra-shape variations, derive the analytical Jacobian of its resulting 2D rendered image, and show example of its fitting performance with light, pose, id, expression and texture variations...

  20. 3D Face Appearance Model

    DEFF Research Database (Denmark)

    Lading, Brian; Larsen, Rasmus; Åström, Kalle

    2006-01-01

    We build a 3d face shape model, including inter- and intra-shape variations, derive the analytical jacobian of its resulting 2d rendered image, and show example of its fitting performance with light, pose, id, expression and texture variations.}......We build a 3d face shape model, including inter- and intra-shape variations, derive the analytical jacobian of its resulting 2d rendered image, and show example of its fitting performance with light, pose, id, expression and texture variations.}...

  1. Carbon-Type Analysis and Comparison of Original and Reblended FACE Diesel Fuels (FACE 2, FACE 4, and FACE 7)

    Energy Technology Data Exchange (ETDEWEB)

    Bays, J. Timothy; King, David L.; O' Hagan, Molly J.

    2012-10-01

    This report summarizes the carbon-type analysis from 1H and 13C{1H} nuclear magnetic resonance spectroscopy (NMR) of Fuels for Advanced Combustion Engines (FACE) diesel blends, FD-2B, FD 4B, and FD-7B, and makes comparison of the new blends with the original FACE diesel blends, FD 2A, FD 4A, and FD-7A, respectively. Generally, FD-2A and FD-2B are more similar than the A and B blends of FD-4 and FD-7. The aromatic carbon content is roughly equivalent, although the new FACE blends have decreased monoaromatic content and increased di- and tri-cycloaromatic content, as well as a higher overall aromatic content, than the original FACE blends. The aromatic components of the new FACE blends generally have a higher alkyl substitution with longer alkyl substituents. The naphthenic and paraffinic contents remained relatively consistent. Based on aliphatic methyl and methylene carbon ratios, cetane numbers for FD-2A and -2B, and FD-7A and -7B are predicted to be consistent, while the cetane number for FD-4B is predicted to be higher than FD-4A. Overall, the new FACE fuel blends are fairly consistent with the original FACE fuel blends, but there are observable differences. In addition to providing important comparative compositional information on reformulated FACE diesel blends, this report also provides important information about the capabilities of the team at Pacific Northwest National Laboratory in the use of NMR spectroscopy for the detailed characterization and comparison of fuels and fuel blends.

  2. Electrical Ground Support Equipment Fabrication, Specification for

    Science.gov (United States)

    Denson, Erik C.

    2014-01-01

    This document specifies parts, materials, and processes used in the fabrication, maintenance, repair, and procurement of electrical and electronic control and monitoring equipment associated with ground support equipment (GSE) at the Kennedy Space Center (KSC).

  3. 40 CFR 265.32 - Required equipment.

    Science.gov (United States)

    2010-07-01

    ... equipment, or automatic sprinklers, or water spray systems. ... of equipment specified below: (a) An internal communications or alarm system capable of providing... assistance from local police departments, fire departments, or State or local emergency response teams;...

  4. Modernization of Deployable Airfield Debris Removal Equipment

    Science.gov (United States)

    2017-04-01

    measurements and to calculate volumes. A market survey of available loading and sweeping equipment was conducted to populate a database of physical...1 1.2 Objective and scope...Equipment ............................................................................................................................. 4 3 Market

  5. Proceedings of FED remote maintenance equipment workshop

    Energy Technology Data Exchange (ETDEWEB)

    Sager, P.; Garin, J.; Hager, E.R.; Spampinato, P.T.; Tobias, D.; Young, N.

    1981-11-01

    A workshop was convened in two sessions in January and March 1981, on the remote maintenance equipment for the Fusion Engineering Device (FED). The objectives of the first session were to familiarize the participants with the status of the design of the FED and to develop a remote maintenance equipment list for the FED. The objective of the second session was to have the participants present design concepts for the equipment which had been identified in the first session. The equipment list was developed for general purpose and special purpose equipment. The general purpose equipment was categorized as manipulators and other, while the special purpose equipment was subdivided according to the reactor subsystem it serviced: electrical, magnetic, and nuclear. Both mobile and fixed base manipulators were identified. Handling machines were identified as the major requirement for special purpose equipment.

  6. Fitness Equipment Brings Business Opportunities

    Institute of Scientific and Technical Information of China (English)

    Lin Feng

    2011-01-01

    @@ Nowadays, as you walk in the domestic cities, color-ful and dynamic signs of gyms will always come into your view.And when you walk into the gym, you must first be greet-ed by rows of neatly stacked tread-mills.People running on the tread-mill, regardless of age, regardless of gender, can control their running speed all by themselves, with sports games playing in the monitor in the front of the equipment, and ears full of beautiful music from their iPods.

  7. First Magdas Equipment In Ecuador

    CERN Document Server

    López, Ericson; Vicente, Klever; Yumoto, K; Vasquez, N; Matsushita, H; Shishime, A; Vásconez, C

    2013-01-01

    The Magnetic Data Acquisition System (MAGDAS) was installed in the protected Jerusalem Park in Malchingui-Ecuador in October of 2012, under the joint collaboration between Kyushu University of Japan and the Quito Astronomical Observatory of the National Polytechnic School of Ecuador. In this paper, we describe the installation process and present the preliminary data obtained with the MAGDAS equipment. The behavior of the four components, D, H, Z and F allow us to see the importance of having the Ecuador station where the magnetic field has not been systematically measured before, in valuable contribution to study of the equatorial atmosphere.

  8. Face activated neurodynamic cortical networks.

    Science.gov (United States)

    Susac, Ana; Ilmoniemi, Risto J; Ranken, Doug; Supek, Selma

    2011-05-01

    Previous neuroimaging studies have shown that complex visual stimuli, such as faces, activate multiple brain regions, yet little is known on the dynamics and complexity of the activated cortical networks during the entire measurable evoked response. In this study, we used simulated and face-evoked empirical MEG data from an oddball study to investigate the feasibility of accurate, efficient, and reliable spatio-temporal tracking of cortical pathways over prolonged time intervals. We applied a data-driven, semiautomated approach to spatio-temporal source localization with no prior assumptions on active cortical regions to explore non-invasively face-processing dynamics and their modulation by task. Simulations demonstrated that the use of multi-start downhill simplex and data-driven selections of time intervals submitted to the Calibrated Start Spatio-Temporal (CSST) algorithm resulted in improved accuracy of the source localization and the estimation of the onset of their activity. Locations and dynamics of the identified sources indicated a distributed cortical network involved in face processing whose complexity was task dependent. This MEG study provided the first non-invasive demonstration, agreeing with intracranial recordings, of an early onset of the activity in the fusiform face gyrus (FFG), and that frontal activation preceded parietal for responses elicited by target faces.

  9. 46 CFR 154.1430 - Equipment locker.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Equipment locker. 154.1430 Section 154.1430 Shipping... Equipment § 154.1430 Equipment locker. One of each item of equipment under §§ 154.1400 and 154.1420 must be stowed in a marked locker: (a) On the open deck in or adjacent to the cargo area; or (b) In...

  10. Statistical Model-Based Face Pose Estimation

    Institute of Scientific and Technical Information of China (English)

    GE Xinliang; YANG Jie; LI Feng; WANG Huahua

    2007-01-01

    A robust face pose estimation approach is proposed by using face shape statistical model approach and pose parameters are represented by trigonometric functions. The face shape statistical model is firstly built by analyzing the face shapes from different people under varying poses. The shape alignment is vital in the process of building the statistical model. Then, six trigonometric functions are employed to represent the face pose parameters. Lastly, the mapping function is constructed between face image and face pose by linearly relating different parameters. The proposed approach is able to estimate different face poses using a few face training samples. Experimental results are provided to demonstrate its efficiency and accuracy.

  11. Marketing Approval of Ethical Kampo Medicines.

    Science.gov (United States)

    Hakamatsuka, Takashi

    2017-01-01

     Kampo medicine is an original traditional medicine in Japan. Currently, 148 ethical Kampo formulations (Kampo prescription drugs) are registered in the National Health Insurance Price List. Kampo medicines can be prescribed under the national insurance system, which shows that they are part of conventional medicine in Japan. Japan has a unified drug approval system that does not distinguish between Western and Kampo medicines, and both are subject to the same regulations. The application for the market approval of ethical Kampo medicines is based on the general notification for drugs, i.e., "Handling of Ethical Combination Drugs" in "Precautions Necessary When Applying for Drug Marketing Approval" (Yakushokushinsa Notification No. 1121-12 of November 21, 2014). Furthermore, applications for the market approval of ethical Kampo medicines should follow the Kampo-specific notification of "Handling of Ethical Kampo Medicines" (Yakushin Notification No. 804 of June 25, 1980). Data from comparative studies with standard decoctions must be submitted with approval applications according to Yakushin 2 Notification No. 120 of May 31, 1985. The safety, efficacy, and quality of Kampo medicines are comprehensively assured by the Japanese Pharmacopoeia, Good Manufacturing Practice, Good Agricultural and Collection Practices, marketing approval certificate, approval standard, and pharmacovigilance. I believe that the basic framework for the market approval of ethical Kampo medicines has been established as described above. The key factors for the practical application of superior manufacturing technology and research achievements and the promotion of drug development are the specific guidelines for the approval of drugs of herbal origin.

  12. OMB Recommended vs Approved Operating Budget

    Data.gov (United States)

    Montgomery County of Maryland — This dataset includes the Fiscal Year 2015 County Executive Recommended and County Council Approved operating budgets for Montgomery County, for comparison purposes....

  13. Data Center Equipment Location and Monitoring System

    DEFF Research Database (Denmark)

    2013-01-01

    Abstract: Data center equipment location systems include hardware and software to provide information on the location, monitoring, and security of servers and other equipment in equipment racks. The systems provide a wired alternative to the wireless RFID tag system by using electronic ID tags...

  14. 46 CFR 28.880 - Hydraulic equipment.

    Science.gov (United States)

    2010-10-01

    ... hydraulic equipment and the adjacent work area. Protection shall be afforded to the operator of hydraulic... 46 Shipping 1 2010-10-01 2010-10-01 false Hydraulic equipment. 28.880 Section 28.880 Shipping... INDUSTRY VESSELS Aleutian Trade Act Vessels § 28.880 Hydraulic equipment. (a) Each hydraulic system must...

  15. Recent R&D in Drilling Equipment

    Institute of Scientific and Technical Information of China (English)

    Sun Zuchen; Huang Zhiqian

    1997-01-01

    @@ Situation for Drilling Equipment Technical performance of drilling equipment and perfection of supporting systems hold the key to drilling safety, technical procedure development and drilling cost. In the end of the 1980s, the stituation for drilling equipment was not optimistic in China because of poor technical performance, low-level supporting system and scarcity of electric-driven rigs.

  16. New Trends in School Science Equipment.

    Science.gov (United States)

    Lowe, Norman K., Ed.

    This four-part volume examines trends, problems, and issues related to school science equipment. Part 1 focuses on laboratory work and practical activities in science and technology education, considering equipment and curriculum development, equipment development related to curricula in Brazil, uses of local resources for practical work,…

  17. 46 CFR 28.405 - Hydraulic equipment.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Hydraulic equipment. 28.405 Section 28.405 Shipping... Operate With More Than 16 Individuals on Board § 28.405 Hydraulic equipment. (a) Each hydraulic system... than four times the system maximum operating pressure. (c) Each hydraulic system must be equipped...

  18. Used equipment-standard contract elements

    Institute of Scientific and Technical Information of China (English)

    Gary F. Alexander

    2004-01-01

    @@ One thing that both the purchase of new and used equipment has in common is the need for a comprehensive purchase agreement. The big difference is that while repetitive purchases of new equipment often only require the modification of one or more sections of a contract, every used equipment transaction and contract is normally different.

  19. Load Bearing Equipment for Bone and Muscle

    Science.gov (United States)

    Shackelford, Linda; Griffith, Bryan

    2015-01-01

    Resistance exercise on ISS has proven effective in maintaining bone mineral density and muscle mass. Exploration missions require exercise with similar high loads using equipment with less mass and volume and greater safety and reliability than resistance exercise equipment used on ISS (iRED, ARED, FWED). Load Bearing Equipment (LBE) uses each exercising person to create and control the load to the partner.

  20. Data Center Equipment Location and Monitoring System

    DEFF Research Database (Denmark)

    2013-01-01

    Abstract: Data center equipment location systems include hardware and software to provide information on the location, monitoring, and security of servers and other equipment in equipment racks. The systems provide a wired alternative to the wireless RFID tag system by using electronic ID tags...

  1. 14 CFR 23.1415 - Ditching equipment.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Ditching equipment. 23.1415 Section 23.1415 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS... Ditching equipment. (a) Emergency flotation and signaling equipment required by any operating rule in...

  2. 46 CFR 121.210 - Heating equipment.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Heating equipment. 121.210 Section 121.210 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS CARRYING MORE THAN 150... SYSTEMS AND EQUIPMENT Cooking and Heating § 121.210 Heating equipment. (a) Each heater must be...

  3. 30 CFR 77.1914 - Electrical equipment.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Electrical equipment. 77.1914 Section 77.1914... Shaft Sinking § 77.1914 Electrical equipment. (a) Electric equipment employed below the collar of a.... (b) The insulation of all electric conductors employed below the collar of any slope or shaft...

  4. 38 CFR 21.216 - Special equipment.

    Science.gov (United States)

    2010-07-01

    ... which the veteran needs special equipment and is eligible for such equipment under other VA programs... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Special equipment. 21.216...) VOCATIONAL REHABILITATION AND EDUCATION Vocational Rehabilitation and Employment Under 38 U.S.C. Chapter...

  5. Material Handling Equipment Evaluation for Crater Repair

    Science.gov (United States)

    2016-11-01

    material handling equipment with a reduced logistical footprint for use by crater repair teams in airfield damage repair (ADR) scenarios. A market ...compared to currently utilized material handling equipment. This report presents the results of the market survey and equipment evaluations. Results...1 1.2 Objective and scope

  6. 29 CFR 1926.952 - Mechanical equipment.

    Science.gov (United States)

    2010-07-01

    ... (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Power Transmission and Distribution § 1926.952 Mechanical equipment. (a) General. (1) Visual inspections shall be made of the equipment to determine that it... 29 Labor 8 2010-07-01 2010-07-01 false Mechanical equipment. 1926.952 Section 1926.952...

  7. Cross-correlation in face discrimination

    NARCIS (Netherlands)

    Simpson, William A.; Loffler, Gunter; Tucha, Lara

    2013-01-01

    An extensive body of literature suggests that face perception depends critically upon specialised face processing mechanisms. Although it seems clear that specialised face processing is required to explain face recognition, face discrimination is a simpler task that could possibly be solved with a g

  8. Carbon Absorber Retrofit Equipment (CARE)

    Energy Technology Data Exchange (ETDEWEB)

    Klein, Eric [Neumann Systems Group, Incorporated, Colorado Springs, CO (United States)

    2015-12-23

    During Project DE-FE0007528, CARE (Carbon Absorber Retrofit Equipment), Neumann Systems Group (NSG) designed, installed and tested a 0.5MW NeuStream® carbon dioxide (CO2) capture system using the patented NeuStream® absorber equipment and concentrated (6 molal) piperazine (PZ) as the solvent at Colorado Springs Utilities’ (CSU’s) Martin Drake pulverized coal (PC) power plant. The 36 month project included design, build and test phases. The 0.5MW NeuStream® CO2 capture system was successfully tested on flue gas from both coal and natural gas combustion sources and was shown to meet project objectives. Ninety percent CO2 removal was achieved with greater than 95% CO2product purity. The absorbers tested support a 90% reduction in absorber volume compared to packed towers and with an absorber parasitic power of less than 1% when configured for operation with a 550MW coal plant. The preliminary techno-economic analysis (TEA) performed by the Energy and Environmental Research Center (EERC) predicted an over-the-fence cost of $25.73/tonne of CO2 captured from a sub-critical PC plant.

  9. Liquid-Liquid Extraction Equipment

    Energy Technology Data Exchange (ETDEWEB)

    Jack D. Law; Terry A. Todd

    2008-12-01

    Solvent extraction processing has demonstrated the ability to achieve high decontamination factors for uranium and plutonium while operating at high throughputs. Historical application of solvent extraction contacting equipment implies that for the HA cycle (primary separation of uranium and plutonium from fission products) the equipment of choice is pulse columns. This is likely due to relatively short residence times (as compared to mixer-settlers) and the ability of the columns to tolerate solids in the feed. Savannah River successfully operated the F-Canyon with centrifugal contactors in the HA cycle (which have shorter residence times than columns). All three contactors have been successfully deployed in uranium and plutonium purification cycles. Over the past 20 years, there has been significant development of centrifugal contactor designs and they have become very common for research and development applications. New reprocessing plants are being planned in Russia and China and the United States has done preliminary design studies on future reprocessing plants. The choice of contactors for all of these facilities is yet to be determined.

  10. The TDCPR Management Mode of Engineering Equipment

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The Three Gorges Project is a very large project, and its structure is very complex. International advanced engineering equipment is broadly used. The state of equipment running directly influences project building qualities and limited time. According to the factual conditions of the Three Gorges Project, the characteristics of engineering equipment are analyzed. At the same time, some theories about equipment management are induced, and the TDCPR management mode of engineering equipmeat of the Three Gorges Project is put forward in order to gain the aim of managing and using equipment well and speeding up the project construction.

  11. FDA approval of comparative claims for prescription drugs--the Moxam case.

    Science.gov (United States)

    Marcus, D

    1983-01-01

    FDA allowance of comparative claims as part of the approved labeling for new prescription drugs creates special problems. Claims contained in prescription drug labeling are viewed by physicians as embodying not just the normal puffery of the manufacturer, but the considered views of government agency charged with protecting public health. Thus, labeling claims for prescription drugs have an impact and significance that promotional claims for other products do not. In the Moxam case--a dispute between Upjohn and Lilly over the FDA's approval of a comparative claim for a new Lilly antibiotic--the agency recognized this fundamental reality. Faced with the prospect of having to provide a procedure to permit competitors to challenge approval of comparative claims, the FDA has moved toward a policy of not permitting such claims in labeling, while allowing them in advertising.

  12. 10 CFR 1016.8 - Approval for processing access permittees for security facility approval.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Approval for processing access permittees for security facility approval. 1016.8 Section 1016.8 Energy DEPARTMENT OF ENERGY (GENERAL PROVISIONS) SAFEGUARDING OF... approval. (a) An access permittee who has a need to use, process, store, reproduce, transmit, or handle...

  13. Ethnicity identification from face images

    Science.gov (United States)

    Lu, Xiaoguang; Jain, Anil K.

    2004-08-01

    Human facial images provide the demographic information, such as ethnicity and gender. Conversely, ethnicity and gender also play an important role in face-related applications. Image-based ethnicity identification problem is addressed in a machine learning framework. The Linear Discriminant Analysis (LDA) based scheme is presented for the two-class (Asian vs. non-Asian) ethnicity classification task. Multiscale analysis is applied to the input facial images. An ensemble framework, which integrates the LDA analysis for the input face images at different scales, is proposed to further improve the classification performance. The product rule is used as the combination strategy in the ensemble. Experimental results based on a face database containing 263 subjects (2,630 face images, with equal balance between the two classes) are promising, indicating that LDA and the proposed ensemble framework have sufficient discriminative power for the ethnicity classification problem. The normalized ethnicity classification scores can be helpful in the facial identity recognition. Useful as a "soft" biometric, face matching scores can be updated based on the output of ethnicity classification module. In other words, ethnicity classifier does not have to be perfect to be useful in practice.

  14. Atypical face gaze in autism.

    Science.gov (United States)

    Trepagnier, Cheryl; Sebrechts, Marc M; Peterson, Rebecca

    2002-06-01

    An eye-tracking study of face and object recognition was conducted to clarify the character of face gaze in autistic spectrum disorders. Experimental participants were a group of individuals diagnosed with Asperger's disorder or high-functioning autistic disorder according to their medical records and confirmed by the Autism Diagnostic Interview-Revised (ADI-R). Controls were selected on the basis of age, gender, and educational level to be comparable to the experimental group. In order to maintain attentional focus, stereoscopic images were presented in a virtual reality (VR) headset in which the eye-tracking system was installed. Preliminary analyses show impairment in face recognition, in contrast with equivalent and even superior performance in object recognition among participants with autism-related diagnoses, relative to controls. Experimental participants displayed less fixation on the central face than did control-group participants. The findings, within the limitations of the small number of subjects and technical difficulties encountered in utilizing the helmet-mounted display, suggest an impairment in face processing on the part of the individuals in the experimental group. This is consistent with the hypothesis of disruption in the first months of life, a period that may be critical to typical social and cognitive development, and has important implications for selection of appropriate targets of intervention.

  15. Heat recovery equipment for engines

    Energy Technology Data Exchange (ETDEWEB)

    Segaser, C.L.

    1977-04-01

    The recovery and use of waste heat from prime movers is an important consideration for evaluating an on-site power system, since it is the basic factor that makes possible a substantial increase in fuel-use efficiency. The equipment usually employed to recover waste heat can be categorized as: (a) shell-and-tube type heat exchangers, (b) radiator-type heat exchangers, (c) exhaust gas boilers for the generation of pressurized hot water and/or steam, (d) steam separators, and (e) combined packaged units for ebulliently cooled internal combustion piston engines. The functional requirements and cost considerations involved in applying these devices for the recovery of waste heat from various types of prime-movers considered for application in the ICES Systems Engineering Program are examined.

  16. Antenna Calibration and Measurement Equipment

    Science.gov (United States)

    Rochblatt, David J.; Cortes, Manuel Vazquez

    2012-01-01

    A document describes the Antenna Calibration & Measurement Equipment (ACME) system that will provide the Deep Space Network (DSN) with instrumentation enabling a trained RF engineer at each complex to perform antenna calibration measurements and to generate antenna calibration data. This data includes continuous-scan auto-bore-based data acquisition with all-sky data gathering in support of 4th order pointing model generation requirements. Other data includes antenna subreflector focus, system noise temperature and tipping curves, antenna efficiency, reports system linearity, and instrument calibration. The ACME system design is based on the on-the-fly (OTF) mapping technique and architecture. ACME has contributed to the improved RF performance of the DSN by approximately a factor of two. It improved the pointing performances of the DSN antennas and productivity of its personnel and calibration engineers.

  17. Equipment leasing: are you overlooking what may be your best financing option?

    Science.gov (United States)

    Campbell, C A; Kelly, T

    1992-08-01

    In this era of increasingly scarce resources, it is imperative that decision makers choose alternatives that are the most efficient and effective use of the resources available. In terms of equipment acquisition, this means not only selecting the right equipment but also choosing the best method of financing the acquisition. Leasing is one alternative that may be the most efficient and effective use of capital. Health information managers should have a basic understanding of the factors to be considered when evaluating the lease vs. purchase alternative. In the competition for increasingly scarce resources, knowing how to present alternatives to the decision makers can make the difference between denial or approval of equipment acquisitions for the health information department.

  18. THE IMPACT OF OVERALL EQUIPMENT EFFECTIVENESS ON PRODUCTION LOSSES IN MOGHAN CABLE & WIRE MANUFACTURING

    Directory of Open Access Journals (Sweden)

    Ladan Hassani

    2015-12-01

    Full Text Available OEE is one of the most popular methods of evaluation of the performance in the manufacturing process to identify and eliminate the causes of production losses. This study has a significant importance due to demonstrating the existing loss and identifying indicators of OEE and their impact on production losses. The main purpose of this study is to minimize the losses of equipment by utilizing the available resources. For this purpose, Moghan Cable & Wire Manufacturing Company was selected as a case study. After collecting equipment data, a questionnaire was designed that its validity was approved by group of experts and its reliability was calculated by using Cronbach's alpha method which was equal to 0.901. Data were analyzed by Structural Equation Model, in order to examine the relationship between variables. The results showed that the high levels of overall equipment effectiveness have a significant impact on the reduction of production losses.

  19. 24 CFR 214.103 - Approval criteria.

    Science.gov (United States)

    2010-04-01

    ... counseling staff must possess a working knowledge of HUD's housing and single-family mortgage insurance... COUNSELING PROGRAM Approval and Disapproval of Housing Counseling Agencies § 214.103 Approval criteria. The... counseling agencies, branches, and affiliates that are included in one application: (a) Nonprofit and...

  20. 7 CFR 22.308 - Project approval.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 1 2010-01-01 2010-01-01 false Project approval. 22.308 Section 22.308 Agriculture Office of the Secretary of Agriculture RURAL DEVELOPMENT COORDINATION Roles and Responsibilities of State Governments § 22.308 Project approval. State and multicounty jurisdictional planning is a State and local...

  1. 9 CFR 317.4 - Labeling approval.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Labeling approval. 317.4 Section 317.4 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY... by descriptive language the final colors, or submission with the sketch of previously approved final...

  2. 38 CFR 21.7220 - Course approval.

    Science.gov (United States)

    2010-07-01

    ...; Pub. L. 98-525) (b) Course approval criteria. In administering benefits payable under 38 U.S.C.... (1) Section 21.4250 (except paragraph (c)(1))—Jurisdiction for course and licensing and certification... study; and (12) Section 21.4268—Approval of licensing and certification tests. (Authority: 38...

  3. 40 CFR 52.1323 - Approval status.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 4 2010-07-01 2010-07-01 false Approval status. 52.1323 Section 52.1323 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED... on January 16, 1979 (44 FR 3274) are met. (b) The Administrator approves Rule 10 CSR 10-2.290...

  4. 40 CFR 49.10042 - Approval status.

    Science.gov (United States)

    2010-07-01

    ... TRIBAL CLEAN AIR ACT AUTHORITY Implementation Plans for Tribes-Region X Implementation Plan for the Cow Creek Band of Umpqua Indians of Oregon § 49.10042 Approval status. There are currently no EPA-approved Tribal rules or measures in the implementation plan for the Reservation of the Cow Creek Band of Umpqua...

  5. Obinutuzumab breaks through to FDA approval.

    Science.gov (United States)

    2014-01-01

    The U.S. Food and Drug Administration approved the monoclonal antibody obinutuzumab for use with chlorambucil in patients with previously untreated chronic lymphocytic leukemia. The drug is the first to receive approval under the agency's breakthrough therapy designation, created in July 2012.

  6. Optimizing Face Recognition Using PCA

    Directory of Open Access Journals (Sweden)

    Manal Abdullah

    2012-03-01

    Full Text Available Principle Component Analysis PCA is a classical feature extraction and data representation technique widely used in pattern recognition. It is one of the most successful techniques in face recognition. But it has drawback of high computational especially for big size database. This paper conducts a study to optimize the time complexity of PCA (eigenfaces that does not affects the recognition performance. The authors minimize the participated eigenvectors which consequently decreases the computational time. A comparison is done to compare the differences between the recognition time in the original algorithm and in the enhanced algorithm. The performance of the original and the enhanced proposed algorithm is tested on face94 face database. Experimental results show that the recognition time is reduced by 35% by applying our proposed enhanced algorithm. DET Curves are used to illustrate the experimental results.

  7. Optimizing Face Recognition Using PCA

    Directory of Open Access Journals (Sweden)

    Manal Abdullah

    2012-04-01

    Full Text Available Principle Component Analysis PCA is a classical feature extraction and data representation technique widely used in pattern recognition. It is one of the most successful techniques in face recognition. But it has drawback of high computational especially for big size database. This paper conducts a study to optimize the time complexity of PCA (eigenfaces that does not affects the recognition performance. The authorsminimize the participated eigenvectors which consequently decreases the computational time. A comparison is done to compare the differences between the recognition time in the original algorithm and in the enhanced algorithm. The performance of the original and the enhanced proposed algorithm is tested on face94 face database. Experimental results show that the recognition time is reduced by 35% by applying our proposed enhanced algorithm. DET Curves are used to illustrate the experimental results.

  8. Development, Implementation, and Analysis of Desktop-Scale Model Industrial Equipment and a Critical Thinking Rubric for Use in Chemical Engineering Education

    Science.gov (United States)

    Golter, Paul B.

    2011-01-01

    In order to address some of the challenges facing engineering education, namely the demand that students be better prepared to practice professional as well as technical skills, we have developed an intervention consisting of equipment, assessments and a novel pedagogy. The equipment consists of desktop-scale replicas of common industrial…

  9. Eye-tracking analysis of face observing and face recognition

    Directory of Open Access Journals (Sweden)

    Andrej Iskra

    2016-07-01

    Full Text Available Images are one of the key elements of the content of the World Wide Web. One group of web images are also photos of people. When various institutions (universities, research organizations, companies, associations, etc. present their staff, they should include photos of people for the purpose of more informative presentation. The fact is, that there are many specifies how people see face images and how do they remember them. Several methods to investigate person’s behavior during use of web content can be performed and one of the most reliable method among them is eye tracking. It is very common technique, particularly when it comes to observing web images. Our research focused on behavior of observing face images in process of memorizing them. Test participants were presented with face images shown at different time scale. We focused on three main face elements: eyes, mouth and nose. The results of our analysis can help not only in web presentation, which are, in principle, not limited by time observation, but especially in public presentations (conferences, symposia, and meetings.

  10. Saving Face and Group Identity

    DEFF Research Database (Denmark)

    Eriksson, Tor; Mao, Lei; Villeval, Marie-Claire

    2015-01-01

    their self- but also other group members' image. This behavior is frequent even in the absence of group identity. When group identity is more salient, individuals help regardless of whether the least performer is an in-group or an out-group. This suggests that saving others' face is a strong social norm.......Are people willing to sacrifice resources to save one's and others' face? In a laboratory experiment, we study whether individuals forego resources to avoid the public exposure of the least performer in their group. We show that a majority of individuals are willing to pay to preserve not only...

  11. Embedded Face Detection and Recognition

    Directory of Open Access Journals (Sweden)

    Göksel Günlü

    2012-10-01

    Full Text Available The need to increase security in open or public spaces has in turn given rise to the requirement to monitor these spaces and analyse those images on‐site and on‐time. At this point, the use of smart cameras ‐ of which the popularity has been increasing ‐ is one step ahead. With sensors and Digital Signal Processors (DSPs, smart cameras generate ad hoc results by analysing the numeric images transmitted from the sensor by means of a variety of image‐processing algorithms. Since the images are not transmitted to a distance processing unit but rather are processed inside the camera, it does not necessitate high‐ bandwidth networks or high processor powered systems; it can instantaneously decide on the required access. Nonetheless, on account of restricted memory, processing power and overall power, image processing algorithms need to be developed and optimized for embedded processors. Among these algorithms, one of the most important is for face detection and recognition. A number of face detection and recognition methods have been proposed recently and many of these methods have been tested on general‐purpose processors. In smart cameras ‐ which are real‐life applications of such methods ‐ the widest use is on DSPs. In the present study, the Viola‐Jones face detection method ‐ which was reported to run faster on PCs ‐ was optimized for DSPs; the face recognition method was combined with the developed sub‐region and mask‐based DCT (Discrete Cosine Transform. As the employed DSP is a fixed‐point processor, the processes were performed with integers insofar as it was possible. To enable face recognition, the image was divided into sub‐ regions and from each sub‐region the robust coefficients against disruptive elements ‐ like face expression, illumination, etc. ‐ were selected as the features. The discrimination of the selected features was enhanced via LDA (Linear Discriminant Analysis and then employed for

  12. [Endoscopy and face-lift].

    Science.gov (United States)

    Dardour, J C; Abbou, R

    2017-08-02

    For many years, the face-lift has not been the only intervention for facial rejuvenation. It is necessary today to specify the type of face-lift, cervico-facial lifting, frontal lifting or facelift. We will consider in this article the frontal lift and centro-facial lift and its possible execution assisted by endoscopy with therefore minimal scars, hidden in the scalp. We will consider successively its technique, its indications and its results highlighting a very long hold over time. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

  13. Instant PrimeFaces starter

    CERN Document Server

    Hlavats, Ian

    2013-01-01

    Get to grips with a new technology, understand what it is and what it can do for you, and then get to work with the most important features and tasks. Instant Primefaces Starter is a fast-paced, introductory guide designed to give you all the information you need to start using Primfaces, instantly.Instant PrimeFaces Starter is great for developers looking to get started quickly with PrimeFaces. It's assumed that you have some JSF experience already, as well as familiarity with other Java technologies such as CDI and JPA and an understanding of MVC principles, object-relational mapping (ORM),

  14. Face Recognition in Uncontrolled Environment

    Directory of Open Access Journals (Sweden)

    Radhey Shyam

    2016-08-01

    Full Text Available This paper presents a novel method of facial image representation for face recognition in uncontrolled environment. It is named as augmented local binary patterns (A-LBP that works on both, uniform and non-uniform patterns. It replaces the central non-uniform pattern with a majority value of the neighbouring uniform patterns obtained after processing all neighbouring non-uniform patterns. These patterns are finally combined with the neighbouring uniform patterns, in order to extract discriminatory information from the local descriptors. The experimental results indicate the vitality of the proposed method on particular face datasets, where the images are prone to extreme variations of illumination.

  15. A Survey: Face Recognition Techniques

    Directory of Open Access Journals (Sweden)

    Muhammad Sharif

    2012-12-01

    Full Text Available In this study, the existing techniques of face recognition are to be encountered along with their pros and cons to conduct a brief survey. The most general methods include Eigenface (Eigenfeatures, Hidden Markov Model (HMM, geometric based and template matching approaches. This survey actually performs analysis on these approaches in order to constitute face representations which will be discussed as under. In the second phase of the survey, factors affecting the recognition rates and processes are also discussed along with the solutions provided by different authors.

  16. Embedded Face Detection and Recognition

    Directory of Open Access Journals (Sweden)

    Göksel Günlü

    2012-10-01

    Full Text Available The need to increase security in open or public spaces has in turn given rise to the requirement to monitor these spaces and analyse those images on-site and on-time. At this point, the use of smart cameras – of which the popularity has been increasing – is one step ahead. With sensors and Digital Signal Processors (DSPs, smart cameras generate ad hoc results by analysing the numeric images transmitted from the sensor by means of a variety of image-processing algorithms. Since the images are not transmitted to a distance processing unit but rather are processed inside the camera, it does not necessitate high-bandwidth networks or high processor powered systems; it can instantaneously decide on the required access. Nonetheless, on account of restricted memory, processing power and overall power, image processing algorithms need to be developed and optimized for embedded processors. Among these algorithms, one of the most important is for face detection and recognition. A number of face detection and recognition methods have been proposed recently and many of these methods have been tested on general-purpose processors. In smart cameras – which are real-life applications of such methods – the widest use is on DSPs. In the present study, the Viola-Jones face detection method – which was reported to run faster on PCs – was optimized for DSPs; the face recognition method was combined with the developed sub-region and mask-based DCT (Discrete Cosine Transform. As the employed DSP is a fixed-point processor, the processes were performed with integers insofar as it was possible. To enable face recognition, the image was divided into sub-regions and from each sub-region the robust coefficients against disruptive elements – like face expression, illumination, etc. – were selected as the features. The discrimination of the selected features was enhanced via LDA (Linear Discriminant Analysis and then employed for recognition. Thanks to its

  17. 14 CFR 21.325 - Export airworthiness approvals.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Export airworthiness approvals. 21.325... AIRCRAFT CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS Export Airworthiness Approvals § 21.325 Export airworthiness approvals. (a) Kinds of approvals. (1) Export airworthiness approval of Class I products is...

  18. Face Fields and Microperimetry for Estimating the Location of Fixation in Eyes with Macular Disease

    Science.gov (United States)

    Sunness, Janet S.

    2008-01-01

    Face field evaluation provides insights into the presence and location of the preferred retinal locus, as validated by comparisons with findings from microperimetry. This technique requires no special equipment and can be used in a clinic or at a person's home by clinicians and low vision rehabilitation specialists. (Contains 2 figures and 2…

  19. Incorporating Online Discussion in Face to Face Classroom Learning: A New Blended Learning Approach

    Science.gov (United States)

    Chen, Wenli; Looi, Chee-Kit

    2007-01-01

    This paper discusses an innovative blended learning strategy which incorporates online discussion in both in-class face to face, and off-classroom settings. Online discussion in a face to face class is compared with its two counterparts, off-class online discussion as well as in-class, face to face oral discussion, to examine the advantages and…

  20. A Comparison of Online and Face-to-Face Approaches to Teaching Introduction to American Government

    Science.gov (United States)

    Bolsen, Toby; Evans, Michael; Fleming, Anna McCaghren

    2016-01-01

    This article reports results from a large study comparing four different approaches to teaching Introduction to American Government: (1) traditional, a paper textbook with 100% face-to-face lecture-style teaching; (2) breakout, a paper textbook with 50% face-to-face lecture-style teaching and 50% face-to-face small-group breakout discussion…

  1. Artificial faces are harder to remember.

    Science.gov (United States)

    Balas, Benjamin; Pacella, Jonathan

    2015-11-01

    Observers interact with artificial faces in a range of different settings and in many cases must remember and identify computer-generated faces. In general, however, most adults have heavily biased experience favoring real faces over synthetic faces. It is well known that face recognition abilities are affected by experience such that faces belonging to "out-groups" defined by race or age are more poorly remembered and harder to discriminate from one another than faces belonging to the "in-group." Here, we examine the extent to which artificial faces form an "out-group" in this sense when other perceptual categories are matched. We rendered synthetic faces using photographs of real human faces and compared performance in a memory task and a discrimination task across real and artificial versions of the same faces. We found that real faces were easier to remember, but only slightly more discriminable than artificial faces. Artificial faces were also equally susceptible to the well-known face inversion effect, suggesting that while these patterns are still processed by the human visual system in a face-like manner, artificial appearance does compromise the efficiency of face processing.

  2. Torque Splitting by a Concentric Face Gear Transmission

    Science.gov (United States)

    Filler, Robert R.; Heath, Gregory F.; Slaughter, Stephen C.; Lewicki, David G.

    2002-01-01

    Tests of a 167 Kilowatt (224 Horsepower) split torque face gearbox were performed by the Boeing Company in Mesa, Arizona, while working under a Defense Advanced Research Projects Agency (DARPA) Technology Reinvestment Program (TRP). This paper provides a summary of these cooperative tests, which were jointly funded by Boeing and DARPA. Design, manufacture and testing of the scaled-power TRP proof-of-concept (POC) split torque gearbox followed preliminary evaluations of the concept performed early in the program. The split torque tests were run using 200 N-m (1767 in-lbs) torque input to each side of the transmission. During tests, two input pinions were slow rolled while in mesh with the two face gears. Two idler gears were also used in the configuration to recombine torque near the output. Resistance was applied at the output face gear to create the required loading conditions in the gear teeth. A system of weights, pulleys and cables were used in the test rig to provide both the input and output loading. Strain gages applied in the tooth root fillets provided strain indication used to determine torque splitting conditions at the input pinions. The final two pinion-two idler tests indicated 52% to 48% average torque split capabilities for the two pinions. During the same tests, a 57% to 43% average distribution of the torque being recombined to the upper face gear from the lower face gear was measured between the two idlers. The POC split torque tests demonstrated that face gears can be applied effectively in split torque rotorcraft transmissions, yielding good potential for significant weight, cost and reliability improvements over existing equipment using spiral bevel gearing.

  3. A study on developpement of guideline on writing technical document for electrical medical devices: Dental x-ray equipment

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Seung Youl; Kim, Jae Ryang; Lee, Jun Ho; Park, Chang Won [Division of Medical Device Research, National Institute of Food and Drug Safety Evaluation, Mnistry of Food and Drug Safety (Korea, Republic of)

    2016-12-15

    Due to recent population aging, the number of check-up for senior citizens has increased steadily. According to this trend, the market size of dental X-ray equipment and the number of approval and review for these devices have simultaneously increased. The technical document of medical device is required for approval and review for medical device, and medical device companies needs to have work comprehension and expertise, as the document needs to include the overall contents such as performances, test criteria, etc.. Yet, since most of domestic manufacturers or importers of medical devices are small businesses, it is difficult for them to recruit professional manpower for approval of medical devices, and submission of inaccurate technical documents has increased. These problems lead to delay of the approval process and to difficulties in quick entering into the market. Especially, the Ministry of Food and Drug safety (MFDS) standards of a dental extra-oral X-ray equipment, a dental intra-oral X-ray equipment, an arm-type computed tomography, and a portable X-ray system have been recently enacted or not. this guideline of dental X-ray equipment adjusting revised standards was developed to help relative companies and reviewers. For this study, first, the methods to write technical document have been reviewed with revised international and domestic regulations and system. Second, the domestic and foreign market status of each item has been surveyed and analyzed. Third, the contents of technical documents already approved by MFDS have been analyzed to select the correct example, test items, criteria, and methods. Finally, the guideline has been developed based on international and domestic regulation, through close review of a consultative body composed of academic, industrial, research institute and government experts.

  4. Face recognition, a landmarks tale

    NARCIS (Netherlands)

    Beumer, Gerrit Maarten

    2009-01-01

    Face recognition is a technology that appeals to the imagination of many people. This is particularly reflected in the popularity of science-fiction films and forensic detective series such as CSI, CSI New York, CSI Miami, Bones and NCIS. Although these series tend to be set in the present, their a

  5. Interpretative challenges in face analysis

    DEFF Research Database (Denmark)

    de Oliveira, Sandi Michele; Hernández-Flores, Nieves

    2015-01-01

    In current research on face analysis questions of who and what should be interpreted, as well as how, are of central interest. In English language research, this question has led to a debate on the concepts of P1 (laypersons, representing the “emic” perspective) and P2 (researchers, representing ...

  6. Saving Face and Group Identity

    DEFF Research Database (Denmark)

    Eriksson, Tor; Mao, Lei; Villeval, Marie-Claire

    2015-01-01

    Are people willing to sacrifice resources to save one's and others' face? In a laboratory experiment, we study whether individuals forego resources to avoid the public exposure of the least performer in their group. We show that a majority of individuals are willing to pay to preserve not only th...

  7. Face-Sealing Butterfly Valve

    Science.gov (United States)

    Tervo, John N.

    1992-01-01

    Valve plate made to translate as well as rotate. Valve opened and closed by turning shaft and lever. Interactions among lever, spring, valve plate, and face seal cause plate to undergo combination of translation and rotation so valve plate clears seal during parts of opening and closing motions.

  8. Facing a dark winter. Albania

    Energy Technology Data Exchange (ETDEWEB)

    Truijen, A.

    2007-11-15

    Albania is once again facing a dark winter. The country has already been suffering power cuts lasting a couple of hours a day for the past seventeen years, Drought, increased power consumption and political maladministration are the factors underlying the electricity problems that have now mushroomed into a national crisis.

  9. Quantitative Analysis of Face Symmetry.

    Science.gov (United States)

    Tamir, Abraham

    2015-06-01

    The major objective of this article was to report quantitatively the degree of human face symmetry for reported images taken from the Internet. From the original image of a certain person that appears in the center of each triplet, 2 symmetric combinations were constructed that are based on the left part of the image and its mirror image (left-left) and on the right part of the image and its mirror image (right-right). By applying a computer software that enables to determine length, surface area, and perimeter of any geometric shape, the following measurements were obtained for each triplet: face perimeter and area; distance between the pupils; mouth length; its perimeter and area; nose length and face length, usually below the ears; as well as the area and perimeter of the pupils. Then, for each of the above measurements, the value C, which characterizes the degree of symmetry of the real image with respect to the combinations right-right and left-left, was calculated. C appears on the right-hand side below each image. A high value of C indicates a low symmetry, and as the value is decreasing, the symmetry is increasing. The magnitude on the left relates to the pupils and compares the difference between the area and perimeter of the 2 pupils. The major conclusion arrived at here is that the human face is asymmetric to some degree; the degree of asymmetry is reported quantitatively under each portrait.

  10. Face recognition, a landmarks tale

    NARCIS (Netherlands)

    Beumer, G.M.

    2009-01-01

    Face recognition is a technology that appeals to the imagination of many people. This is particularly reflected in the popularity of science-fiction films and forensic detective series such as CSI, CSI New York, CSI Miami, Bones and NCIS. Although these series tend to be set in the present, their ap

  11. The Face of the Moon

    Institute of Scientific and Technical Information of China (English)

    张保

    2001-01-01

    Have you ever seen the man in the moon?If you look closelyat the moon on some nights, you can see the face of the man in themoon. Some people say that they can see an old man carryingsticks. Others see a girl reading a book. These pictures are madeby the mountains (山脉) and plains (平原) of the moon.

  12. Repetition priming from moving faces.

    Science.gov (United States)

    Lander, Karen; Bruce, Vicki

    2004-06-01

    Recent experiments have suggested that seeing a familiar face move provides additional dynamic information to the viewer, useful in the recognition of identity. In four experiments, repetition priming was used to investigate whether dynamic information is intrinsic to the underlying face representations. The results suggest that a moving image primes more effectively than a static image, even when the same static image is shown in the prime and the test phases (Experiment 1). Furthermore, when moving images are presented in the test phase (Experiment 2), there is an advantage for moving prime images. The most priming advantage is found with naturally moving faces, rather than with those shown in slow motion (Experiment 3). Finally, showing the same moving sequence at prime and test produced more priming than that found when different moving sequences were shown (Experiment 4). The results suggest that dynamic information is intrinsic to the face representations and that there is an advantage to viewing the same moving sequence at prime and test.

  13. Continuing Education: Facing the Issues.

    Science.gov (United States)

    Broadbent, Marianne

    1986-01-01

    Examines a number of issues facing the Australian library and information services community in the area of continuing education, including recommendations of the Library Association of Australia, the cost of continuing education activities, the role and responsibility of schools of library and information studies, and notions of coordination.…

  14. Towards automatic forensic face recognition

    NARCIS (Netherlands)

    Ali, Tauseef; Spreeuwers, Luuk; Veldhuis, Raymond

    2011-01-01

    In this paper we present a methodology and experimental results for evidence evaluation in the context of forensic face recognition. In forensic applications, the matching score (hereafter referred to as similarity score) from a biometric system must be represented as a Likelihood Ratio (LR). In our

  15. The Two Faces of Micropolitics.

    Science.gov (United States)

    Hoyle, Eric

    1999-01-01

    Demystifies the two "faces" of micropolitics. "Policy micropolitics" distinguishes between micropolitics and management and focuses on the relationship between school micropolitics and the wider macropolitical context. "Management micropolitics" makes no clear micropolitics/management distinction and focuses on educators' strategies to pursue…

  16. Cool Styles for Your Face

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    GLASSES are a part of modern fashion. The right spectacle frames can not only add some demureness to you, but also perfect your face. To choose suitable frames for yourself, you must first know your own features. Comb all your hair backwards to show your entire features clearly in front of the

  17. Face Recognition With Neural Networks

    Science.gov (United States)

    1992-12-01

    Ninth Annual Cognitive Science Society Conference, Volume unknown:461-473 (1987). 8. Damasio , Antonio R. "Prosopagnosia," Trends in Neuroscience, 8:132...is also supported by the work of J. C. Meadows and A. R. Damasio in their studies of individuals who have lost the ability to recognize faces, a

  18. Interpretative challenges in face analysis

    DEFF Research Database (Denmark)

    de Oliveira, Sandi Michele; Hernández-Flores, Nieves

    2015-01-01

    In current research on face analysis questions of who and what should be interpreted, as well as how, are of central interest. In English language research, this question has led to a debate on the concepts of P1 (laypersons, representing the “emic” perspective) and P2 (researchers, representing ...

  19. Anthropometric Procedures for Protective Equipment Sizing and Design

    Science.gov (United States)

    Hsiao, Hongwei

    2015-01-01

    Objectives This article presented four anthropometric theories (univariate, bivariate/probability distribution, multivariate, and shape-based methods) for protective equipment design decisions. Background While the significance of anthropometric information for product design is well recognized, designers continue to face challenges in selecting efficient anthropometric data processing methods and translating the acquired information into effective product designs. Methods For this study, 100 farm tractor operators, 3,718 respirator users, 951 firefighters, and 816 civilian workers participated in four studies on the design of tractor roll-over protective structures (ROPS), respirator test panels, fire truck cabs, and fall-arrest harnesses, respectively. Their anthropometry and participant-equipment interfaces were evaluated. Results Study 1 showed a need to extend the 90-cm vertical clearance for tractor ROPS in the current industrial standards to 98.3 to 101.3 cm. Study 2 indicated that current respirator test panel would have excluded 10% of the male firefighter population; a systematic adjustment to the boundaries of test panel cells was suggested. Study 3 provided 24 principal component analysis-based firefighter body models to facilitate fire truck cab design. Study 4 developed an improved gender-based fall-arrest harness sizing scheme to supplant the current unisex system. Conclusions This article presented four anthropometric approaches and a six-step design paradigm for ROPS, respirator test panel, fire truck cab, and fall-arrest harness applications, which demonstrated anthropometric theories and practices for defining protective equipment fit and sizing schemes. Applications The study provided a basis for equipment designers, standards writers, and industry manufacturers to advance anthropometric applications for product design and improve product efficacy. PMID:23516791

  20. Mine railway equipments management information system

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, X.; Han, K.; Duan, T.; Liu, Z.; Lu, H. [China University of Mining and Technology, Xuzhou (China)

    2007-06-15

    Based on client/server and browser/server models, the management information system described realized the entire life-cycle management of mine railway equipment which included universal equipment and special equipment in the locomotive depot, track maintenance division, electrical depot and car depot. The system has other online functions such as transmitting reports, graphics management, statistics, searches, graphics wizard and web propaganda. It was applied in Pingdingshan Coal Co. Ltd.'s Railway Transport Department. 5 refs., 4 figs.

  1. Face to Face : The Perception of Automotive Designs.

    Science.gov (United States)

    Windhager, Sonja; Slice, Dennis E; Schaefer, Katrin; Oberzaucher, Elisabeth; Thorstensen, Truls; Grammer, Karl

    2008-12-01

    Over evolutionary time, humans have developed a selective sensitivity to features in the human face that convey information on sex, age, emotions, and intentions. This ability might not only be applied to our conspecifics nowadays, but also to other living objects (i.e., animals) and even to artificial structures, such as cars. To investigate this possibility, we asked people to report the characteristics, emotions, personality traits, and attitudes they attribute to car fronts, and we used geometric morphometrics (GM) and multivariate statistical methods to determine and visualize the corresponding shape information. Automotive features and proportions are found to covary with trait perception in a manner similar to that found with human faces. Emerging analogies are discussed. This study should have implications for both our understanding of our prehistoric psyche and its interrelation with the modern world.

  2. Item Nonresponse in Face-to-Face Interviews with Children

    Directory of Open Access Journals (Sweden)

    Haunberger Sigrid

    2014-09-01

    Full Text Available This study examined item nonresponse and its respondent and interviewer correlates by means of a population-based, panel survey of children aged 8 to 11 who were surveyed using standardised, face-to-face interviews. Using multilevel, logistic analyses with cross-level interactions, this article aims to examine which effects of item nonresponse are subject to children as respondents or to the interviewers and the interview setting. Depending on the type of question, we found different effects for respondent and interviewer variables, as well as interaction effects between child age/interviewer age as well as child gender/interviewer gender. However, interviewer variance is for the most part not significant.

  3. Face detection by aggregated Bayesian network classifiers

    NARCIS (Netherlands)

    Pham, T.V.; Worring, M.; Smeulders, A.W.M.

    2002-01-01

    A face detection system is presented. A new classification method using forest-structured Bayesian networks is used. The method is used in an aggregated classifier to discriminate face from non-face patterns. The process of generating non-face patterns is integrated with the construction of the aggr

  4. Recognizing Faces with Partial Occlusion using Inpainting

    National Research Council Canada - National Science Library

    Vijayalakshmi A

    2017-01-01

    .... In this paper, a hybrid inpainting approach is followed to recover the lost region of a face. This approach increases the recognition rate of faces that are occluded. Experimental result on hybrid inpainting proves that the recognition rate on faces increases on comparison with existing methods on occluded faces.

  5. Holistic Processing of Static and Moving Faces

    Science.gov (United States)

    Zhao, Mintao; Bülthoff, Isabelle

    2017-01-01

    Humans' face ability develops and matures with extensive experience in perceiving, recognizing, and interacting with faces that move most of the time. However, how facial movements affect 1 core aspect of face ability--holistic face processing--remains unclear. Here we investigated the influence of rigid facial motion on holistic and part-based…

  6. Export of electronics equipment waste.

    Science.gov (United States)

    LaDou, Joseph; Lovegrove, Sandra

    2008-01-01

    Electronics equipment waste ("e-waste") includes discarded computers, computer monitors, television sets, and cell phones. Less than 10% of e-waste is currently recycled. The United States and other developed countries export e-waste primarily to Asia, knowing it carries a real harm to the poor communities where it will be discarded. A 2006 directive bans the use of lead, mercury, cadmium, hexavalent chromium, and certain brominated flame retardants in most electronics products sold in the EU. A similar directive facilitates the development and design of clean electronics products with longer lifespans that are safe and easy to repair, upgrade, and recycle, and will not expose workers and the environment to hazardous chemicals. These useful approaches apply only regionally and cover only a fraction of the hazardous substances used in electronics manufacture, however. There is an urgent need for manufacturers of electronics products to take responsibility for their products from production to end-of-life, and for much tighter controls both on the transboundary movement of e-waste and on the manner in which it is recycled. Manufacturers must develop clean products with longer lifespans that are safe and easy to repair, upgrade, and recycle and will not expose workers and the environment to hazardous chemicals.

  7. ISS qualified thermal carrier equipment

    Science.gov (United States)

    Deuser, Mark S.; Vellinger, John C.; Jennings, Wm. M.

    2000-01-01

    Biotechnology is undergoing a period of rapid and sustained growth, a trend which is expected to continue as the general population ages and as new medical treatments and products are conceived. As pharmaceutical and biomedical companies continue to search for improved methods of production and, for answers to basic research questions, they will seek out new avenues of research. Space processing on the International Space Station (ISS) offers such an opportunity! Space is rapidly becoming an industrial laboratory for biotechnology research and processing. Space bioprocessing offers exciting possibilities for developing new pharmaceuticals and medical treatments, which can be used to benefit mankind on Earth. It also represents a new economic frontier for the private sector. For over eight years, the thermal carrier development team at SHOT has been working with government and commercial sector scientists who are conducting microgravity experiments that require thermal control. SHOT realized several years ago that the hardware currently being used for microgravity thermal control was becoming obsolete. It is likely that the government, academic, and industrial bioscience community members could utilize SHOT's hardware as a replacement to their current microgravity thermal carrier equipment. Moreover, SHOT is aware of several international scientists interested in utilizing our space qualified thermal carrier. SHOT's economic financing concept could be extremely beneficial to the international participant, while providing a source of geographic return for their particular region. Beginning in 2000, flight qualified thermal carriers are expected to be available to both the private and government sectors. .

  8. Aircraft Wiring Support Equipment Integration Laboratory (AWSEIL)

    Data.gov (United States)

    Federal Laboratory Consortium — Purpose: The Aircraft Wiring Support Equipment Integration Laboratory (AWSEIL) provides a variety of research, design engineering and prototype fabrication services...

  9. Detection of Equipment Faults Before Beam Loss

    CERN Document Server

    Galambos, J.

    2016-01-01

    High-power hadron accelerators have strict limits on fractional beam loss. In principle, once a high-quality beam is set up in an acceptable state, beam loss should remain steady. However, in practice, there are many trips in operational machines, owing to excessive beam loss. This paper deals with monitoring equipment health to identify precursor signals that indicate an issue with equipment that will lead to unacceptable beam loss. To this end, a variety of equipment and beam signal measurements are described. In particular, several operational examples from the Spallation Neutron Source (SNS) of deteriorating equipment functionality leading to beam loss are reported.

  10. Aircraft Wiring Support Equipment Integration Laboratory (AWSEIL)

    Data.gov (United States)

    Federal Laboratory Consortium — Purpose:The Aircraft Wiring Support Equipment Integration Laboratory (AWSEIL) provides a variety of research, design engineering and prototype fabrication services...

  11. An Analysis Pattern for Equipment Management

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    In this paper, we account for this subject: how to de sign a pattern, it can track the state of the equipment of some organizations su ch as enterprise, organ, laboratory, school etc. We present an analysis pattern, which describes the whole procedure of managing the equipment and record the us ing of the equipment. It not only can track the quantity and location of the equ ipment of the whole organization, the more important is it can update the state of the equipment at real-time automatically. First,...

  12. Process Equipment Cost Estimation, Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Loh, H. P. [National Energy Technology Lab. (NETL), Morgantown, WV (United States); Lyons, Jennifer [EG& G Technical Services, Inc., Morgantown, WV (United States); White, Charles W. [EG& G Technical Services, Inc., Morgantown, WV (United States)

    2002-01-01

    This report presents generic cost curves for several equipment types generated using ICARUS Process Evaluator. The curves give Purchased Equipment Cost as a function of a capacity variable. This work was performed to assist NETL engineers and scientists in performing rapid, order of magnitude level cost estimates or as an aid in evaluating the reasonableness of cost estimates submitted with proposed systems studies or proposals for new processes. The specific equipment types contained in this report were selected to represent a relatively comprehensive set of conventional chemical process equipment types.

  13. Face Detection and Face Recognition in Android Mobile Applications

    Directory of Open Access Journals (Sweden)

    Octavian DOSPINESCU

    2016-01-01

    Full Text Available The quality of the smartphone’s camera enables us to capture high quality pictures at a high resolution, so we can perform different types of recognition on these images. Face detection is one of these types of recognition that is very common in our society. We use it every day on Facebook to tag friends in our pictures. It is also used in video games alongside Kinect concept, or in security to allow the access to private places only to authorized persons. These are just some examples of using facial recognition, because in modern society, detection and facial recognition tend to surround us everywhere. The aim of this article is to create an appli-cation for smartphones that can recognize human faces. The main goal of this application is to grant access to certain areas or rooms only to certain authorized persons. For example, we can speak here of hospitals or educational institutions where there are rooms where only certain employees can enter. Of course, this type of application can cover a wide range of uses, such as helping people suffering from Alzheimer's to recognize the people they loved, to fill gaps persons who can’t remember the names of their relatives or for example to automatically capture the face of our own children when they smile.

  14. Kernel learning algorithms for face recognition

    CERN Document Server

    Li, Jun-Bao; Pan, Jeng-Shyang

    2013-01-01

    Kernel Learning Algorithms for Face Recognition covers the framework of kernel based face recognition. This book discusses the advanced kernel learning algorithms and its application on face recognition. This book also focuses on the theoretical deviation, the system framework and experiments involving kernel based face recognition. Included within are algorithms of kernel based face recognition, and also the feasibility of the kernel based face recognition method. This book provides researchers in pattern recognition and machine learning area with advanced face recognition methods and its new

  15. Proposal for the Donation of Equipment

    CERN Document Server

    2004-01-01

    CERN has been requested by the Japanese High Energy Accelerator Research Organization (KEK) to donate the UA1 Magnet for use within the T2K Experiment. The Finance Committee is invited to approve this donation.

  16. Combustion and regulations. Impacts of new regulations on medium-power thermal equipment (boilers, engines, turbines, dryers and furnaces); Combustion et reglementation. Incidences des nouvelles reglementations sur les equipements thermiques de moyenne puissance (chaudieres, moteurs, turbines, secheurs et fours)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    This conference is composed of 20 papers on the influence of French and European new pollution regulations on medium size thermal equipment such as boilers, engines, turbines, dryers and furnaces. It is discussed what is going to change with new regulations, how they will apply to existing plants, what will be the impact on future equipment costs. The evolution of energy suppliers and equipment manufacturers facing these new regulations is also examined: fuel substitution, improvements in turbines and engines with water injection and special chambers, diesel engine control, lean mixtures and electronic control for gas engines... Means for reducing SOx, NOx and ash emission levels in boilers are also examined

  17. Unconstrained Face Verification using Deep CNN Features

    OpenAIRE

    Chen, Jun-Cheng; Patel, Vishal M.; Chellappa, Rama

    2015-01-01

    In this paper, we present an algorithm for unconstrained face verification based on deep convolutional features and evaluate it on the newly released IARPA Janus Benchmark A (IJB-A) dataset. The IJB-A dataset includes real-world unconstrained faces from 500 subjects with full pose and illumination variations which are much harder than the traditional Labeled Face in the Wild (LFW) and Youtube Face (YTF) datasets. The deep convolutional neural network (DCNN) is trained using the CASIA-WebFace ...

  18. Perceptual load effects on processing distractor faces indicate face-specific capacity limits

    OpenAIRE

    Thoma, Volker; Lavie, Nilli

    2013-01-01

    The claim that face perception is mediated by a specialized ‘face module’ that proceeds automatically, independently of attention (e.g., Kanwisher, 2000) can be reconciled with load theory claims that visual perception has limited capacity (e.g., Lavie, 1995) by hypothesizing that face perception has face-specific capacity limits. We tested this hypothesis by comparing the effects of face and non-face perceptual load on distractor face processing. Participants searched a central array of eith...

  19. The dilemma of approving antidotes.

    Science.gov (United States)

    Steffen, Christian

    2007-04-20

    Clinical trials with antidotes are difficult to perform for a variety of practical, ethical, and financial reasons. As acute poisoning is a rare event, the commercial interest in basic and clinical research is low. Poisoned patients are usually not available for normal clinical trial procedures and, if they are, they cannot give informed consent. This situation results in a dilemma: antidotes are essential drugs. A resolution of the Council of Europe requests to guarantee the optimal availability of antidotes and the improvement of their use. As comprehensive data on the efficacy of antidotes are often missing, a marketing authorisation under exceptional circumstances according to Article 14(8) of Regulation (EC) No. 276/2004, will often be the only way to get an approval, as: (1) the indications for which the product in question is intended are encountered so rarely that the applicant cannot reasonably be expected to provide comprehensive evidence ("orphan drug"), (2) in the present state of scientific knowledge, comprehensive information cannot be provided, or (3) it would be contrary to generally accepted principles of medical ethics to collect such data. Typically, data on antidotes are obtained from a patchwork of studies with animals, human tissue and a few observations from human poisoning corroborated with data from clinical observations and biochemistry. Generalisations from chemical and mechanistic similarities between groups of poisons are usual, but often lack scientific evidence. Current standards of good clinical practice can rarely be observed. Therefore, public funding and other financial support are necessary incentives to initiate trials in this important area.

  20. Social Cognition in Williams Syndrome: Face Tuning.

    Science.gov (United States)

    Pavlova, Marina A; Heiz, Julie; Sokolov, Alexander N; Barisnikov, Koviljka

    2016-01-01

    Many neurological, neurodevelopmental, neuropsychiatric, and psychosomatic disorders are characterized by impairments in visual social cognition, body language reading, and facial assessment of a social counterpart. Yet a wealth of research indicates that individuals with Williams syndrome exhibit remarkable concern for social stimuli and face fascination. Here individuals with Williams syndrome were presented with a set of Face-n-Food images composed of food ingredients and in different degree resembling a face (slightly bordering on the Giuseppe Arcimboldo style). The primary advantage of these images is that single components do not explicitly trigger face-specific processing, whereas in face images commonly used for investigating face perception (such as photographs or depictions), the mere occurrence of typical cues already implicates face presence. In a spontaneous recognition task, participants were shown a set of images in a predetermined order from the least to most resembling a face. Strikingly, individuals with Williams syndrome exhibited profound deficits in recognition of the Face-n-Food images as a face: they did not report seeing a face on the images, which typically developing controls effortlessly recognized as a face, and gave overall fewer face responses. This suggests atypical face tuning in Williams syndrome. The outcome is discussed in the light of a general pattern of social cognition in Williams syndrome and brain mechanisms underpinning face processing.

  1. Social cognition in Williams syndrome: face tuning

    Directory of Open Access Journals (Sweden)

    Marina A Pavlova

    2016-08-01

    Full Text Available Many neurological, neurodevelopmental, neuropsychiatric and psychosomatic disorders are characterized by impairments in visual social cognition, body language reading, and facial assessment of a social counterpart. Yet a wealth of research indicates that individuals with Williams syndrome exhibit remarkable concern for social stimuli and face fascination. Here individuals with Williams syndrome were presented with a set of Face-n-Food images composed of food ingredients and in different degree resembling a face (slightly bordering on the Giuseppe Arcimboldo style. The primary advantage of these images is that single components do not explicitly trigger face-specific processing, whereas in face images commonly used for investigating face perception (such as photographs or depictions, the mere occurrence of typical cues already implicates face presence. In a spontaneous recognition task, participants were shown a set of images in a predetermined order from the least to most resembling a face. Strikingly, individuals with Williams syndrome exhibited profound deficits in recognition of the Face-n-Food images as a face: they did not report seeing a face on the images, which typically developing controls effortlessly recognized as a face, and gave overall fewer face responses. This suggests atypical face tuning in Williams syndrome. The outcome is discussed in the light of a general pattern of social cognition in Williams syndrome and brain mechanisms underpinning face processing.

  2. Lunar construction/mining equipment

    Science.gov (United States)

    Ozdemir, Levent

    1990-01-01

    For centuries, mining has utilized drill and blast as the primary method of rock excavation. Although this technique has undergone significant improvements, it still remains a cyclic, labor intensive operation with inherent safety hazards. Other drawbacks include damage to the surrounding ground, creation of blast vibrations, rough excavation walls resulting in increased ventilation requirements, and the lack of selective mining ability. Perhaps the most important shortcoming of drill and blast is that it is not conducive to full implementation of automation or robotics technologies. Numerous attempts have been made in the past to automate drill and blast operations to remove personnel from the hazardous work environment. Although most of the concepts devised look promising on paper, none of them was found workable on a sustained production basis. In particular, the problem of serious damage to equipment during the blasting cycle could not be resolved regardless of the amount of charge used in excavation. Since drill and blast is not capable of meeting the requirements of a fully automated rock fragmentation method, its role is bound to gradually decrease. Mechanical excavation, in contrast, is highly suitable to automation because it is a continuous process and does not involve any explosives. Many of the basic principles and trends controlling the design of an earth-based mechanical excavator will hold in an extraterrestrial environment such as on the lunar surface. However, the economic and physical limitations for transporting materials to space will require major rethinking of these machines. In concept, then, a lunar mechanical excavator will look and perform significantly different from one designed for use here on earth. This viewgraph presentation gives an overview of such mechanical excavator systems.

  3. Markerless 3D Face Tracking

    DEFF Research Database (Denmark)

    Walder, Christian; Breidt, Martin; Bulthoff, Heinrich

    2009-01-01

    We present a novel algorithm for the markerless tracking of deforming surfaces such as faces. We acquire a sequence of 3D scans along with color images at 40Hz. The data is then represented by implicit surface and color functions, using a novel partition-of-unity type method of efficiently...... combining local regressors using nearest neighbor searches. Both these functions act on the 4D space of 3D plus time, and use temporal information to handle the noise in individual scans. After interactive registration of a template mesh to the first frame, it is then automatically deformed to track...... the scanned surface, using the variation of both shape and color as features in a dynamic energy minimization problem. Our prototype system yields high-quality animated 3D models in correspondence, at a rate of approximately twenty seconds per timestep. Tracking results for faces and other objects...

  4. Processing faces and facial expressions.

    Science.gov (United States)

    Posamentier, Mette T; Abdi, Hervé

    2003-09-01

    This paper reviews processing of facial identity and expressions. The issue of independence of these two systems for these tasks has been addressed from different approaches over the past 25 years. More recently, neuroimaging techniques have provided researchers with new tools to investigate how facial information is processed in the brain. First, findings from "traditional" approaches to identity and expression processing are summarized. The review then covers findings from neuroimaging studies on face perception, recognition, and encoding. Processing of the basic facial expressions is detailed in light of behavioral and neuroimaging data. Whereas data from experimental and neuropsychological studies support the existence of two systems, the neuroimaging literature yields a less clear picture because it shows considerable overlap in activation patterns in response to the different face-processing tasks. Further, activation patterns in response to facial expressions support the notion of involved neural substrates for processing different facial expressions.

  5. Pilgrims Face Recognition Dataset -- HUFRD

    OpenAIRE

    Aly, Salah A.

    2012-01-01

    In this work, we define a new pilgrims face recognition dataset, called HUFRD dataset. The new developed dataset presents various pilgrims' images taken from outside the Holy Masjid El-Harram in Makkah during the 2011-2012 Hajj and Umrah seasons. Such dataset will be used to test our developed facial recognition and detection algorithms, as well as assess in the missing and found recognition system \\cite{crowdsensing}.

  6. The IMM Frontal Face Database

    DEFF Research Database (Denmark)

    Fagertun, Jens; Stegmann, Mikkel Bille

    2005-01-01

    This note describes a data set consisting of 120 annotated monocular images of 12 different frontal human faces. Points of correspondence are placed on each image so the data set can be readily used for building statistical models of shape. Format specifications and terms of use are also given in...... in this note. The data set is available in two versions: i) low resolution, given in the zip-file electronic version, ii) high, given in the publication link....

  7. Depression: FDA-Approved Medications May Help

    Science.gov (United States)

    ... Products For Consumers Home For Consumers Consumer Updates Depression: FDA-Approved Medications May Help Share Tweet Linkedin ... symptoms in some people. back to top Diagnosing Depression Diagnosis—which should be from a health care ...

  8. 30 CFR 7.409 - Approval marking.

    Science.gov (United States)

    2010-07-01

    ... approval number in addition to the number and size (gauge) of conductors and cable type. For cables containing electric conductors, the marking shall also include the voltage rating. For splices, the...

  9. Drugs Approved for Colon and Rectal Cancer

    Science.gov (United States)

    This page lists cancer drugs approved by the Food and Drug Administration (FDA) for use in colon cancer and rectal cancer. The list includes generic names, brand names, and common drug combinations, which are shown in capital letters.

  10. Actemra Approved for Certain Blood Vessel Inflammation

    Science.gov (United States)

    ... 165836.html Actemra Approved for Certain Blood Vessel Inflammation Drug will treat adults with a condition called ... to treat adults with giant cell arteritis, an inflammation of the blood vessels (vasculitis). In a media ...

  11. Drugs Approved for Gestational Trophoblastic Disease

    Science.gov (United States)

    This page lists cancer drugs approved by the Food and Drug Administration (FDA) for gestational trophoblastic disease. The list includes generic names and brand names. The drug names link to NCI's Cancer Drug Information summaries.

  12. Drugs Approved for Head and Neck Cancer

    Science.gov (United States)

    This page lists cancer drugs approved by the Food and Drug Administration (FDA) for head and neck cancer. The list includes generic names and brand names. The drug names link to NCI’s Cancer Drug Information summaries.

  13. FDA Approves First Immunotherapy for Lymphoma

    Science.gov (United States)

    The FDA has approved nivolumab (Opdivo®) for the treatment of patients with classical Hodgkin lymphoma whose disease has relapsed or worsened after receiving an autologous hematopoietic stem cell transplantation followed by brentuximab vedotin (Adcetris®)

  14. Drugs Approved for Kidney (Renal Cell) Cancer

    Science.gov (United States)

    ... 2015 2014 2013 2012 Media Resources Media Contacts Multicultural Media ... This page lists cancer drugs approved by the Food and Drug Administration (FDA) for kidney (renal cell) cancer. The list ...

  15. Drugs Approved for Soft Tissue Sarcoma

    Science.gov (United States)

    ... 2015 2014 2013 2012 Media Resources Media Contacts Multicultural Media ... This page lists cancer drugs approved by the Food and Drug Administration (FDA) for soft tissue sarcoma. The list includes ...

  16. Drugs Approved for Non-Hodgkin Lymphoma

    Science.gov (United States)

    ... 2015 2014 2013 2012 Media Resources Media Contacts Multicultural Media ... This page lists cancer drugs approved by the Food and Drug Administration (FDA) for non-Hodgkin lymphoma. The list includes ...

  17. Verificação da prótese auditiva realizada face a face e via teleconsulta: medidas repetidas Telecounselling and face to face hearing aid verification: repeated measures

    Directory of Open Access Journals (Sweden)

    Deborah Viviane Ferrari

    2012-12-01

    Full Text Available OBJETIVO: avaliar as medidas repetidas da resposta de ressonância da orelha externa sem (REUR e com uso de amplificação (REAR e o ganho de inserção (REIG, realizados face a face e via teleconsulta. MÉTODO: estudo prospectivo longitudinal. Foram realizadas quatro repetições da REUR, REAR e REIG (com estímulo speech noise apresentado em 65 dB NPS e 0º azimute em 19 orelhas de adultos ouvintes normais, via face a face (F e teleconsulta síncrona por controle remoto de aplicativo (T e vídeo interativo. O software Polycom PVX foi utilizado para compartilhamento e transmissão de áudio e vídeo. A conexão foi realizada via LAN (Local Area Network USP na velocidade de 384 kbps Foi calculado o erro causal (Dalhberg entre as quatro medidas para frequências de 250 a 8000 Hz. RESULTADOS: os erros casuais entre as medidas F e T foram muito semelhantes, sendo maiores nas frequências acima de 4 kHz. As diferenças e variações entre as medidas F e T estavam dentro da magnitude de variabilidade do procedimento de medidas com microfone sonda. CONCLUSÃO: as medidas com microfone sonda via teleconsulta fornece resultados confiáveis e similares aos obtidos pelo procedimento padrão.PURPOSE: to evaluate the repeated measurements of the real ear unaided response (REUR, real ear aided response (REAR and insertion gain (REIG conducted as face to face (F and via telecounselling (T. METHOD: longitudinal prospective study. Four measures of REUR, REAR and REIG (carried out with speech noise stimulus presented at 65 dB SPL at 0° azimuth were obtained in 19 ears in normal hearing adults, face to face and via synchronous telecounsellings with remote control of the real ear equipment and interactive video. Polycom PVX software was used for desktop sharing and video and audio transmission. The Loca Area Network (LAN USP was used for the connection (transmission rate: 384 kbps. Dahlberg’s casual errors were calculated for obtaining the measures for

  18. Equipment for the Disabled. Volumes 1 - 4.

    Science.gov (United States)

    Wilshere, E. Rosamond, Comp.

    Four volumes of equipment for the disabled which can simplify their lives and those who live with them are presented. The authors have not included surgical, medical, therapeutic, corrective or gymnastic equipment in the publication. Voume one includes house adaptations and planning, beds and bed accessories, chairs, and wheelchairs and…

  19. 29 CFR 1926.600 - Equipment.

    Science.gov (United States)

    2010-07-01

    ... motors stopped and brakes set, unless work being performed requires otherwise. (ii) Whenever the equipment is parked, the parking brake shall be set. Equipment parked on inclines shall have the wheels chocked and the parking brake set. (4) The use, care and charging of all batteries shall conform to...

  20. Office equipment energy use and trends

    Energy Technology Data Exchange (ETDEWEB)

    Piette, M.A.; Eto, J.H.; Harris, J.P.

    1991-09-01

    Office information technologies are using an increasing amount of energy in commercial buildings. During recent forecasting hearings in California, the office equipment end use has been a major source of differences among forecasts of commercial sector energy use. Not only are there major differences in forecasted load growth resulting from the energy use of office equipment, but there are also differences in interpretations of historical and base-year estimates. Understanding office equipment energy use is particularly important because office equipment is widely believed to be the fastest growing electrical end use in the fastest growing sector. This report describes the development and application of a spreadsheet to estimate current and future energy use by office equipment. We define the term office equipment'' to mean information processing technologies used in buildings. The seven categories of office equipment relate to categories found in our analysis of utility surveys and industry sales reports. These seven categories of equipment are examined for eleven types of commercial buildings.

  1. Office equipment energy use and trends

    Energy Technology Data Exchange (ETDEWEB)

    Piette, M.A.; Eto, J.H.; Harris, J.P.

    1991-09-01

    Office information technologies are using an increasing amount of energy in commercial buildings. During recent forecasting hearings in California, the office equipment end use has been a major source of differences among forecasts of commercial sector energy use. Not only are there major differences in forecasted load growth resulting from the energy use of office equipment, but there are also differences in interpretations of historical and base-year estimates. Understanding office equipment energy use is particularly important because office equipment is widely believed to be the fastest growing electrical end use in the fastest growing sector. This report describes the development and application of a spreadsheet to estimate current and future energy use by office equipment. We define the term ``office equipment`` to mean information processing technologies used in buildings. The seven categories of office equipment relate to categories found in our analysis of utility surveys and industry sales reports. These seven categories of equipment are examined for eleven types of commercial buildings.

  2. Quantitative techniques for medical equipment maintenance management

    NARCIS (Netherlands)

    Ben Houria, Zeineb; Masmoudi, Malek; Al Hanbali, Ahmad; Khatrouch, Ikram; Masmoudi, Faouzi

    2016-01-01

    The maintenance department in a hospital is responsible for ensuring the safety of medical equipment and their availability while keeping the operation costs minimal. The selection of the best maintenance strategy is a key decision to reduce the equipment downtime, increase the availability, and bri

  3. 30 CFR 56.7002 - Equipment defects.

    Science.gov (United States)

    2010-07-01

    ... Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling § 56.7002 Equipment defects. Equipment defects affecting safety shall be corrected...

  4. 30 CFR 57.7002 - Equipment defects.

    Science.gov (United States)

    2010-07-01

    ... Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling-Surface Only § 57.7002 Equipment defects. Equipment defects affecting...

  5. Equipped for Life: More than a Game.

    Science.gov (United States)

    Shively, Randy

    2002-01-01

    The EQUIP Program teaches antisocial youth to think and behave more pro-socially and addresses motivating youth to use these tools. The Equipped for Life game is a motivational tool, which provides students with opportunities for social learning. Topics revolve around community reintegration and can be easily adapted to any cognitive behavioral…

  6. Communications techniques and equipment: A compilation

    Science.gov (United States)

    1975-01-01

    This Compilation is devoted to equipment and techniques in the field of communications. It contains three sections. One section is on telemetry, including articles on radar and antennas. The second section describes techniques and equipment for coding and handling data. The third and final section includes descriptions of amplifiers, receivers, and other communications subsystems.

  7. Functioning condition monitoring of industrial equipment

    Science.gov (United States)

    Ungureanu, N. S.; Petrovan, A.; Ungureanu, M.; Alexandrescu, M.

    2017-02-01

    The paper analyses the theoretical aspects related to monitoring industrial equipment. Are treated issues that concern the choosing of industrial equipment to be monitored, the parameters to be monitored, monitoring mode (local or remote) and the mode of collection and transmission of data.

  8. 46 CFR 184.210 - Heating equipment.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Heating equipment. 184.210 Section 184.210 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) VESSEL CONTROL AND MISCELLANEOUS SYSTEMS AND EQUIPMENT Cooking and Heating § 184.210 Heating...

  9. 46 CFR 153.466 - Electrical equipment.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Electrical equipment. 153.466 Section 153.466 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SHIPS CARRYING... Requirements for Flammable Or Combustible Cargoes § 153.466 Electrical equipment. A tankship carrying...

  10. 77 FR 13173 - Best Equipped Best Served

    Science.gov (United States)

    2012-03-05

    ... Federal Aviation Administration Best Equipped Best Served AGENCY: Department of Transportation, Federal... scenarios. The candidate proposals for discussion have been designed to deliver on the best equipped, best performing, best served concept for implementation in the 2012-2014 timeframe. The proposed scenarios target...

  11. 15 CFR 14.34 - Equipment.

    Science.gov (United States)

    2010-01-01

    ... organizations for a fee that is less than private companies charge for equivalent services, unless specifically..., and continued need for the equipment. (4) A control system shall be in effect to insure adequate... the equipment, proper sales procedures shall be established which provide for competition to...

  12. 24 CFR 84.34 - Equipment.

    Science.gov (United States)

    2010-04-01

    ... to non-Federal outside organizations for a fee that is less than private companies charge for... effect to insure adequate safeguards to prevent loss, damage, or theft of the equipment. Any loss, damage... the equipment, proper sales procedures shall be established which provide for competition to...

  13. 28 CFR 70.34 - Equipment.

    Science.gov (United States)

    2010-07-01

    ... organizations for a fee that is less than private companies charge for equivalent services, unless specifically..., and continued need for the equipment. (4) A control system must be in effect to insure adequate... equipment, proper sales procedures must be established which provide for competition to the...

  14. [Metrological software of laser medical equipment].

    Science.gov (United States)

    Romashkov, A P; Glazov, A I; Tikhomirov, S V

    2001-01-01

    The paper considers the laser medical equipment situation that has established in Russia and that is characterized by the wide medical application of laser technologies and appropriate software and by inadequate development and imperfection of required metrological software and maintenance of laser equipment.

  15. 38 CFR 43.32 - Equipment.

    Science.gov (United States)

    2010-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Equipment. 43.32 Section 43.32 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS (CONTINUED) UNIFORM... the equipment in accordance with Federal agency rules and procedures, and submit an annual...

  16. MAGNETIC FLUID BEARINGS OF MINING EQUIPMENT

    Directory of Open Access Journals (Sweden)

    I. Gorlov

    2012-01-01

    Full Text Available The paper considers a problem pertaining to selection friction pair materials for plain bearings of mining equipment which are lubricated with  nano-dispersed magnetic oil. Methodology for equipment tests, technology for obtaining new anti-friction materials (polymer, ceramic, amorphous and investigation results are presented in the paper.

  17. EQUIP3 Newsletter. Issue Number 19

    Science.gov (United States)

    EQUIP3, 2009

    2009-01-01

    The "EQUIP3 Newsletter" is an e-newsletter that is currently sent to subscribers quarterly. It provides updates on EQUIP3 activities and initiatives, and shares excerpts from relevant youth development resources. This issue contains the following articles: (1) Bangladesh Youth Employment Pilot (BYEP); (2) CSY [Cross-Sectoral Youth]/YED…

  18. 21 CFR 211.65 - Equipment construction.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 4 2010-04-01 2010-04-01 false Equipment construction. 211.65 Section 211.65 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS... construction. (a) Equipment shall be constructed so that surfaces that contact components, in-process...

  19. Days individual equipment of protection and professional risks; Equipements de protection individuelle et risques professionnelles

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-07-01

    The personal protection equipment is studied in the legal way (legal liabilities, certification, European texts), technical way (ergonomics, painfulness of ventilated equipment wearing, reliability of a respirable air line, protection gloves against the chemical risk, exposure to nano particulates, working in hot area), human factors (hostile area and emotion management), studies on personal equipment such evaluation, efficiency, conception of new equipment, physiological tolerance, limit of use, and some general safety studies on the working places. (N.C.)

  20. Online or Face to Face? A Comparison of Two Methods of Training Professionals

    Science.gov (United States)

    Dillon, Kristin; Dworkin, Jodi; Gengler, Colleen; Olson, Kathleen

    2008-01-01

    Online courses offer benefits over face-to-face courses such as accessibility, affordability, and flexibility. Literature assessing the effectiveness of face-to-face and online courses is growing, but findings remain inconclusive. This study compared evaluations completed by professionals who had taken a research update short course either face to…