WorldWideScience

Sample records for fabricating liquid crystal

  1. Bistable liquid crystal device fabricated via microscale liquid crystal alignment

    Science.gov (United States)

    Honma, Michinori; Toyoshima, Wataru; Nose, Toshiaki

    2016-10-01

    Bistable liquid crystal (LC) molecular orientation properties in micropatterned LC cells were investigated experimentally and theoretically. When an LC cell was heated to the phase-transition temperature and then cooled, an LC orientation with ±π/2-twist domains (±π/2-twist mode) was obtained. Furthermore, a different LC orientation with ±π-twist domains (±π-twist mode) was observed when a 10-V potential was applied across a sample LC cell. Both orientation states were stably retained over a long period. Herein, cross-sectional LC orientation models in the ±π/2- and ±π-twist modes are proposed to explain the generation and behavior of two different disclination lines. The total energies within one period in the ±π/2- and ±π-twist modes (F±π/2 and F±π, respectively) were estimated theoretically. These energies were found to depend on the LC layer thickness and to cross over at a certain thickness; this indicates that F±π is equal to F±π/2 at this equilibrium thickness. The best temporal stability is likely attained at this equilibrium thickness. We demonstrated a bistable color-switching device by combining a full-wave plate and crossed polarizers. When these optical components were configured properly, stable bistable switching between two colors was achieved.

  2. Frequency and Temperature Dependence of Fabrication Parameters in Polymer Dispersed Liquid Crystal Devices

    Directory of Open Access Journals (Sweden)

    Juan C. Torres

    2014-05-01

    Full Text Available A series of polymer dispersed liquid crystal devices using glass substrates have been fabricated and investigated focusing on their electrical properties. The devices have been studied in terms of impedance as a function of frequency. An electric equivalent circuit has been proposed, including the influence of the temperature on the elements into it. In addition, a relevant effect of temperature on electrical measurements has been observed.

  3. Fabrication of focus-tunable liquid crystal microlens array with spherical electrode

    Science.gov (United States)

    Huang, Wei-Ming; Su, Guo-Dung J.

    2016-09-01

    In this paper, a new approach to fabricate a liquid crystal (LC) microlens array with spherical-shaped electrode is demonstrated, which can create the inhomogeneous electric field. Inkjet-printing, hydrophilic confinement, self-assemble and replication process is used to form the convex microlens array on glass. After the spherical-shaped electrode is done, we assemble it with ITO glass to form a liquid crystal cell. We used Zemax® to simulate the liquid crystal lens as a Gradient-index (GRIN) lens. The simulation results show that a GRIN lens model can well match with the theoretical focal length of liquid crystal lens. The dimension of the glass is 1.5 cm x 1.5 cm x 0.7 mm which has 7 concave microlens on the top surface. These microlens have same diameter and height about 300 μm and 85 μm. The gap between each other is 100 μm. We first fabricate microlens array on silicon substrate by hydrophilic confinement, which between hydrophilicity of silicon substrate and hydrophobicity of SU-8, and inkjet printing process. Then we start replication process with polydimethylsiloxane (PDMS) to transfer microlens array form silicon to glass substrate. After the transparent conducted polymer, PEDOT:PSS, is spin-coated on the microlens arrays surface, we flatten it by NOA65. Finally we assemble it with ITO glass and inkjet liquid crystal. From measuring the interference rings, the optical power range is from 47.28 to 331 diopter. This will be useful for the optical zoom system or focus-tunable lens applications.

  4. Fabrication of a Liquid Crystal Capacitor Cell using Spin-Coating

    Science.gov (United States)

    Tate, Logan; Ducharme, Tabatha; Prayaga, Chandra; Wade, Aaron; Huggins, Michael; Chandler, Rebecca; Renaud, Amy

    2013-03-01

    This paper presents our work to fabricate and characterize a liquid crystal capacitor cell using novel liquid crystals. These LCs are not in their isotropic phase at room temperature and require the capacitor cells to be fabricated around them. This was done using spin coating where the samples were dissolved in Toluene, Anisole, or C4CL. Next, the liquid crystals were spin-coated on either an ITO coated glass slide or a separate silicon wafer. This spin coating process was done in two stages where the first stage started at a slow speed to begin spreading the sample, and then during the second stage the spin coater ramped to a higher rpm to thin the sample while removing excess material. M-Line spectroscopy was used to determine the films thickness of the silicon substrate sample. To make the capacitor cell, a second ITO coated slide was placed on top of the first and the edges sealed with epoxy. Wires were soldered to the bus bars and the samples were mounted in a temperature controlled environment constructed in the lab and an RC circuit was assembled using the LC capacitor. Initial dielectric measurements were taken at room temperature to ensure the integrity of the cell.

  5. Dynamic Time Multiplexing Fabrication of Holographic Polymer Dispersed Liquid Crystals for Increased Wavelength Sensitivity

    Science.gov (United States)

    Fontecchio, Adam K. (Inventor); Rai, Kashma (Inventor)

    2017-01-01

    Described herein is a new holographic polymer dispersed liquid crystal (HPDLC) medium with broadband reflective properties, and a new technique for fabrication of broadband HPDLC mediums. The new technique involves dynamic variation of the holography setup during HPDLC formation, enabling the broadening of the HPDLC medium's wavelength response. Dynamic variation of the holography setup may include the rotation and/or translation of one or more motorized stages, allowing for time and spatial, or angular, multiplexing through variation of the incident angles of one or more laser beams on a pre-polymer mixture during manufacture. An HPDLC medium manufactured using these techniques exhibits improved optical response by reflecting a broadband spectrum of wavelengths. A new broadband holographic polymer dispersed liquid crystal thin film polymeric mirror stack with electrically-switchable beam steering capability is disclosed. XXXX Described herein is a new holographic polymer dispersed liquid crystal (HPDLC) medium with broadband reflective properties, and a new technique for fabrication of broadband 10 HPDLC mediums. The new technique involves dynamic variation of the holography setup during HPDLC formation, enabling the broadening of the HPDLC medium's wavelength response. Dynamic variation of the holography setup may include the rotation and/or translation of one or more 15 motorized stages, allowing for time and spatial, or angular, multiplexing through variation of the incident angles of one or more laser beams on a pre-polymer mixture during manufacture. An HPDLC medium manufactured using these techniques exhibits improved optical response by reflecting 20 a broadband spectrum of wavelengths. A new broadband holographic polymer dispersed liquid crystal thin film polymeric mirror stack with electrically switchable beam steering capability is disclosed.

  6. Liquid Crystals

    Science.gov (United States)

    1990-01-01

    Thermochromic liquid crystals, or TLCs, are a type of liquid crystals that react to changes in temperature by changing color. The Hallcrest/NASA collaboration involved development of a new way to visualize boundary layer transition in flight and in wind tunnel testing of aircraft wing and body surfaces. TLCs offered a new and potentially better method of visualizing the boundary layer transition in flight. Hallcrest provided a liquid crystal formulation technique that afforded great control over the sensitivity of the liquid crystals to varying conditions. Method is of great use to industry, government and universities for aerodynamic and hydrodynamic testing. Company's principal line is temperature indicating devices for industrial use, such as non-destructive testing and flaw detection in electric/electronic systems, medical application, such as diagnostic systems, for retail sale, such as room, refrigerator, baby bath and aquarium thermometers, and for advertising and promotion specials. Additionally, Hallcrest manufactures TLC mixtures for cosmetic applications, and liquid crystal battery tester for Duracell batteries.

  7. Liquid crystal gratings for advanced control of polarized light propagation fabricated by one-step multiple beam holographic photoalignment

    Science.gov (United States)

    Kawai, K.; Sakamoto, M.; Noda, K.; Sasaki, T.; Kawatsuki, N.; Ono, H.

    2017-02-01

    Liquid crystal grating with three-dimensionally modulated anisotropic structure is fabricated by one-step exposure of an empty glass cell whose inner walls are coated with photocrosslinkable polymer liquid crystals to four-beam polarization interference UV beams. The diffraction properties were probed with a 633 nm wavelength laser and a 532 nm wavelength laser which were the coaxial incident. The novel properties, which diffraction directions are threedimensionally different depending on the wavelengths, are realized by the resultant liquid crystal grating. Furthermore, the resultant liquid crystal grating can be also applied to an advanced polarizing beam splitter which opposite circular polarization and linear polarizations are diffracted simultaneously. These diffraction properties were well-explained by Jones calculus. The resultant liquid crystal grating has the plural of the functions of optical elements such as wave plates, polarization beam splitter, dichroic beam splitter, Wollaston/Rochon prism, and tunable wavelength filter. Therefore, the resultant liquid crystal grating can contribute to miniaturization, sophistication, and cost reduction of optical systems using for, such as optical measurement, communication, and information processing.

  8. Fabrication of a Mono-Domain Alignment Ferroelectric Liquid Crystal Device Using a Polar Self-Assembled Monolayer

    Institute of Scientific and Technical Information of China (English)

    ZOU Zhong-Fei; YAO Li-Shuang; TANG Xian-Zhu; JI Xin-Jian; XUAN Li

    2008-01-01

    A mono-domain ferroelectric liquid crystal device (FLCD) is fabricated using a novel method. The cell used in this method is an asymmetric cell, typically the combination of a polar self-assembled monolayer (SAM) for one substrate and a rubbed polyimide for the other substrate. A defect-free alignment of ferroelectric liquid crystal is fabricated without applying a dc voltage to remove degeneracy in the layer structure. The contact angles of self-assembled monolayer and PI-2942 are measured and the polarity of SAM is higher than the PI alignment. It is found that the polarity of self-assembled monolayer is a key factor in the formation of mono-domain alignment of FLC.

  9. Fabrication and structure of Langmuir-Blodgett films of ferroelectric liquid crystal

    Institute of Scientific and Technical Information of China (English)

    WEN Zi; JIANG Qing; T.Kenji; O.Yukihiro

    2005-01-01

    The molecular aggregation, orientation, and structure in Langmuir-Blodgett films of ferroelectric liquid crystal were studied by ultraviolet and Fourier transform infrared spectra. The results show that medium strong H-aggregates in the Langmuir-Blodgett films of ferroelectric liquid crystal are formed by chromophores where the alkyl chains are nearly perpendicular to the film surface. Compared with the cast films, the CO stretching bands, due to the rotational isomerism around the O-C axis of the chiral part, can be identified clearly in Langmuir-Blodgett films.

  10. Liquid crystal modified photonic crystal fiber (LC-PCF) fabricated with an un-cured SU-8 photoresist sealing technique for electrical flux measurement.

    Science.gov (United States)

    Kuo, Shu-Ming; Huang, Yu-Wen; Yeh, Szu-Ming; Cheng, Wood-Hi; Lin, Che-Hsin

    2011-09-12

    The optical transmission properties of photonic crystal fibers (PCFs) can be manipulated by modifying the pattern arrangement of the air channels within them. This paper presents a novel MEMS-based technique for modifying the optical transmission properties of commercial photonic-crystal fiber (PCF) by selectively filling the voids within the fiber structure with liquid crystals. In the proposed approach, an un-cured SU-8 ring pattern with a thickness of 5 μm is fabricated using a novel stamping method. The PCF is then brought into contact with the SU-8 pattern and an infra-red (IR) laser beam is passed through the fiber in order to soften the SU-8 surface; thereby selectively sealing some of the air channels with molten SU-8. Liquid crystals (LCs) are then infiltrated into the un-sealed holes in the PCF via capillary effects in order to modify the transmission properties of the PCF. Two selectively-filled PCFs are fabricated, namely an inner-ring LC-PCF and a single-line LC-PCF, respectively. It is shown that the two LC-PCFs exhibit significantly different optical behaviors. The practical applicability of the proposed selective-filling approach is demonstrated by fabricating an electric field sensor. The experimental results show that the sensor has the ability to measure electric fields with an intensity of up to 40 kV/cm.

  11. Fabrication of liquid crystal based sensor for detection of hydrazine vapours

    Science.gov (United States)

    Nandi, Rajib; Singh, Sachin Kumar; Singh, Hemant Kumar; Singh, Bachcha; Singh, Ranjan K.

    2014-10-01

    A novel liquid crystal (LC) based sensor to detect trace level amount of hydrazine vapour has been developed. The LC 4‧-pentyl-4-biphenylcarbonitrile (5CB) doped with 0.5 wt% 4-decyloxy benzaldehyde (DBA) shows dark to bright optical texture upon exposure of hydrazine vapours as revealed by polarizing optical microscopy under crossed polarizers. The hydrazine interacts with the doped DBA and form diimine compound which disrupt the orientation of aligned 5CB. The interaction between DBA and hydrazine has been also studied by Raman spectroscopy.

  12. Fabrication of sisal fibers/epoxy composites with liquid crystals polymer grafted on sisal fibers

    Science.gov (United States)

    Luo, Q. Y.; Lu, S. R.; Song, L. F.; Li, Y. Q.

    2016-07-01

    In this word, microcrystalline cellulose fibers (MCFs), extracted from sisal fibers, were treated with function end-group hyperbranched liquid crystals (HLP). This work brought some insights into the successful surface modification in epoxy composite with HLP. The HLP-MCFs/epoxy composites are studied systematically. The HLP - MCFs/epoxy composites were studied by Fourier transform infrared spectroscopy (FT-IR), polarizing microscope (POM), X-ray photoelectron spectroscopy (XPS) and mechanical properties analysis. The results reveal that the reinforcement of EP composites was carried out by adding HLP-MCFs. In particular, with 1.0 wt% filler loading, the flexural strength, tensile strength, impact strength and flexural modulus of the HLP-MCFs/EP composites were increased by 60%, 69%, 130%, and 192%, respectively. It anticipates that our current work exploits more efficient methods to overcome the few nature fiber/polymer (NPC) adhesion in the interface region and provides implications for the engineering applications of the development of NPC.

  13. Liquid crystal behavior induced assembling fabrication of conductive chiral MWCNTs@NCC nanopaper

    Science.gov (United States)

    Ren, Yumei; Wang, Tianjiao; Chen, Zhimin; Li, Jing; Tian, Qiuge; Yang, Hongxia; Xu, Qun

    2016-11-01

    The conductive chiral MWCNTs@NCC nanopapers obtained by the assembly of nanocrystalline cellulose liquid crystals (NCC LCs) host matrix along with one-dimensional (1-D) multi-walled carbon nanotubes (MWCNTs) have been studied in this work. Circular dichroism (CD) studies show strong signals stemming from the chiral nematic structure. Notably, the introduction of the MWCNTs has a pronounced effect on the chiral structure of the as-prepared nanopaper. Our experimental results indicate the multiple weak molecular interactions existing between MWCNTs and NCC are responsible for the effective dispersion and stabilization of MWCNTs. Moreover it also confirms the resulting nanopaper has an increased conductivity of 4.2 S/m at 1.96 wt% MWCNTs. So the co-assembly of the nanocomposite herein opens a gateway for preparing functional materials combining the photonic properties of the NCC LCs matrix with other building blocks that can supply other advantageous functions.

  14. A miniaturized, eye-conformable, and long-term reliable retinal prosthesis using monolithic fabrication of liquid crystal polymer (LCP).

    Science.gov (United States)

    Jeong, Joonsoo; Bae, So Hyun; Min, Kyou Sik; Seo, Jong-Mo; Chung, Hum; Kim, Sung June

    2015-03-01

    A novel retinal prosthetic device was developed using biocompatible liquid crystal polymer (LCP) to address the problems associated with conventional metal- and polymer-based devices: the hermetic metal package is bulky, heavy, and labor-intensive, whereas a thin, flexible, and MEMS-compatible polymer-based system is not durable enough for chronic implantation. Exploiting the advantageous properties of LCP such as a low moisture absorption rate, thermobonding, and thermoforming, we fabricate a small, light-weight, long-term reliable retinal prosthesis that can be conformally attached on the eye-surface. A LCP fabrication process using monolithic integration and conformal deformation was established enabling miniaturization and a batch manufacturing process as well as eliminating the need for feed-through technology. The functionality of the fabricated device was tested through wireless operation in saline solution. Its efficacy and implantation stability were verified through in vivo animal tests by measuring the cortical potential and monitoring implanted dummy devices for more than a year, respectively.

  15. Blazed vector grating liquid crystal cells with photocrosslinkable polymeric alignment films fabricated by one-step polarizer rotation method

    Science.gov (United States)

    Kawai, Kotaro; Kuzuwata, Mitsuru; Sasaki, Tomoyuki; Noda, Kohei; Kawatsuki, Nobuhiro; Ono, Hiroshi

    2014-12-01

    Blazed vector grating liquid crystal (LC) cells, in which the directors of low-molar-mass LCs are antisymmetrically distributed, were fabricated by one-step exposure of an empty glass cell inner-coated with a photocrosslinkable polymer LC (PCLC) to UV light. By adopting a LC cell structure, twisted nematic (TN) and homogeneous (HOMO) alignments were obtained in the blazed vector grating LC cells. Moreover, the diffraction efficiency of the blazed vector grating LC cells was greatly improved by increasing the thickness of the device in comparison with that of a blazed vector grating with a thin film structure obtained in our previous study. In addition, the diffraction efficiency and polarization states of ±1st-order diffracted beams from the resultant blazed vector grating LC cells were controlled by designing a blazed pattern in the alignment films, and these diffraction properties were well explained on the basis of Jones calculus and the elastic continuum theory of nematic LCs.

  16. Neural signal recording using microelectrode arrays fabricated on liquid crystal polymer material

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Choong Jae; Oh, Seung Jae; Song, Jong Keun; Kim, Sung June

    2004-01-05

    Microelectrode arrays have been developed for simultaneous multi-channel recordings from nervous systems, typically using silicon substrates. However, it has been known that it is difficult to meet the biocompatibility and durability requirements using silicon and other dielectric materials (SiO{sub 2}, Si{sub 3}N{sub 4}), due to environmental moisture and ions. Additional disadvantage of silicon being the rigid material makes it hard to apply these materials in chronic recording situations. Liquid Crystal Polymer (LCP) was recently introduced as a candidate material for electronic packaging purposes. The material acts as efficient barrier against ions and moisture, a desirable feature for a substrate material of microelectrode arrays. In this paper, we report on the neural recording performed using the LCP-based microelectrode arrays. The cell adhesion on the new material was compared very favorably with that using silicon, SiO{sub 2}, or polyimide material. The microelectrode arrays were patterned with Ti (500 Angst)/Au (3500 Angst) on the LCP film and were employed in both stimulation and recording from rat sciatic nerve. The electrical characteristic of the recorded signal was as good as those using other substrate materials, proving this material as an excellent candidate for next generation microelectrode arrays.

  17. Liquid crystal behavior induced assembling fabrication of conductive chiral MWCNTs@NCC nanopaper

    Energy Technology Data Exchange (ETDEWEB)

    Ren, Yumei; Wang, Tianjiao; Chen, Zhimin; Li, Jing; Tian, Qiuge; Yang, Hongxia; Xu, Qun, E-mail: qunxu@zzu.edu.cn

    2016-11-01

    Highlights: • In this study conductive chiral MWCNTs@NCC nanopapers were prepared. • The introduction of the MWCNTs has a pronounced effect on the chiral structure of the as-prepared nanopaper. • The multiple weak molecular interactions existing between MWCNTs and NCC are responsible for the effective dispersion and stabilization of MWCNTs. • The resulting nanopaper has an increased conductivity. - Abstract: The conductive chiral MWCNTs@NCC nanopapers obtained by the assembly of nanocrystalline cellulose liquid crystals (NCC LCs) host matrix along with one-dimensional (1-D) multi-walled carbon nanotubes (MWCNTs) have been studied in this work. Circular dichroism (CD) studies show strong signals stemming from the chiral nematic structure. Notably, the introduction of the MWCNTs has a pronounced effect on the chiral structure of the as-prepared nanopaper. Our experimental results indicate the multiple weak molecular interactions existing between MWCNTs and NCC are responsible for the effective dispersion and stabilization of MWCNTs. Moreover it also confirms the resulting nanopaper has an increased conductivity of 4.2 S/m at 1.96 wt% MWCNTs. So the co-assembly of the nanocomposite herein opens a gateway for preparing functional materials combining the photonic properties of the NCC LCs matrix with other building blocks that can supply other advantageous functions.

  18. Fabrication of micro- and nanometre-scale polymer structures in liquid crystal devices for next generation photonics applications

    Science.gov (United States)

    Tartan, Chloe C.; Salter, Patrick S.; Booth, Martin J.; Morris, Stephen M.; Elston, Steve J.

    2016-09-01

    Direct Laser Writing (DLW) by two-photon photopolymerization (TPP) enables the fabrication of micron-scale polymeric structures in soft matter systems. The technique has implications in a broad range of optics and photonics; in particular fast-switching liquid crystal (LC) modes for the development of next generation display technologies. In this paper, we report two different methodologies using our TPP-based fabrication technique. Two explicit examples are provided of voltage-dependent LC director profiles that are inherently unstable, but which appear to be promising candidates for fast-switching photonics applications. In the first instance, 1 μm-thick periodic walls of polymer network are written into a planar aligned (parallel rubbed) nematic pi-cell device containing a nematic LC-monomer mixture. The structures are fabricated when the device is electrically driven into a fast-switching nematic LC state and aberrations induced by the device substrates are corrected for by virtue of the adaptive optics elements included within the DLW setup. Optical polarizing microscopy images taken post-fabrication reveal that polymer walls oriented perpendicular to the rubbing direction promote the stability of the so-called optically compensated bend mode upon removal of the externally applied field. In the second case, polymer walls are written in a nematic LC-optically adhesive glue mixture. A polymer- LCs-polymer-slices or `POLICRYPS' template is formed by immersing the device in acetone post-fabrication to remove any remaining non-crosslinked material. Injecting the resultant series of polymer microchannels ( 1 μm-thick) with a short-pitch, chiral nematic LC mixture leads to the spontaneous alignment of a fast-switching chiral nematic mode, where the helical axis lies parallel to the glass substrates. Optimal contrast between the bright and dark states of the uniform lying helix alignment is achieved when the structures are spaced at the order of the device thickness

  19. Liquid crystal tunable photonic crystal dye laser

    DEFF Research Database (Denmark)

    Buss, Thomas; Christiansen, Mads Brøkner; Smith, Cameron

    2010-01-01

    We present a dye-doped liquid crystal laser using a photonic crystal cavity. An applied electric field to the liquid crystal provides wavelength tunability. The photonic crystal enhances resonant interaction with the gain medium....

  20. Liquid Crystal Airborne Display

    Science.gov (United States)

    1977-08-01

    81/2X 11- 10 -9 .8 display using a large advertising alphanimeric ( TCI ) has been added to the front of the optical box used in the F-4 aircraft for HUD...properties over a wide range of tempera - tures, including normal room temperature. What are Liquid Crystals? Liquid crystals have been classified in three...natic fanctions and to present data needed for the semi- automatic and manual control of system functions. Existing aircraft using CRT display

  1. Liquid crystal colloids

    Directory of Open Access Journals (Sweden)

    2010-01-01

    Full Text Available This special issue of "Condensed Matter Physics" focuses on the most recent developments in the study of a fascinating soft matter system, representing colloidal particles in a liquid crystalline environment. Furthermore, some articles address pioneering steps in the discovery of liquid crystals going back to 1861 paper by Julius Planer.

  2. Liquid crystals fundamentals

    CERN Document Server

    Singh, Shri

    2001-01-01

    Liquid crystals are partially ordered systems without a rigid, long-range structure. The study of these materials covers a wide area: chemical structure, physical properties and technical applications. Due to their dual nature - anisotropic physical properties of solids and rheological behavior of liquids - and easy response to externally applied electric, magnetic, optical and surface fields liquid crystals are of greatest potential for scientific and technological applications. The subject has come of age and has achieved the status of being a very exciting interdisciplinary field of scienti

  3. High Birefringence Liquid Crystals

    Directory of Open Access Journals (Sweden)

    Jakub Herman

    2013-09-01

    Full Text Available Liquid crystals, compounds and mixtures with positive dielectric anisotropies are reviewed. The mesogenic properties and physical chemical properties (viscosity, birefringence, refractive indices, dielectric anisotropy and elastic constants of compounds being cyano, fluoro, isothiocyanato derivatives of biphenyl, terphenyl, quaterphenyl, tolane, phenyl tolane, phenyl ethynyl tolane, and biphenyl tolane are compared. The question of how to obtain liquid crystal with a broad range of nematic phases is discussed in detail. Influence of lateral substituent of different kinds of mesogenic and physicochemical properties is presented (demonstrated. Examples of mixtures with birefringence ∆n in the range of 0.2–0.5 are given.

  4. Simulating polymer liquid crystals

    NARCIS (Netherlands)

    Bladon, P.; Frenkel, D.

    1996-01-01

    A model suitable for simulating lyotropic polymer liquid crystals (PLCs) is described. By varying the persistence length between infinity and 25, the effect of increasing flexibility on the nematic - smectic transition of a PLC with a length-to-width ratio L/D = 6 is investigated. It is found that

  5. Liquid crystals in tribology.

    Science.gov (United States)

    Carrión, Francisco-José; Martínez-Nicolás, Ginés; Iglesias, Patricia; Sanes, José; Bermúdez, María-Dolores

    2009-09-18

    Two decades ago, the literature dealing with the possible applications of low molar mass liquid crystals, also called monomer liquid crystals (MLCs), only included about 50 references. Today, thousands of papers, conference reports, books or book chapters and patents refer to the study and applications of MLCs as lubricants and lubricant additives and efforts are made to develop new commercial applications. The development of more efficient lubricants is of paramount technological and economic relevance as it is estimated that half the energy consumption is dissipated as friction. MLCs have shown their ability to form ordered boundary layers with good load-carrying capacity and to lower the friction coefficients, wear rates and contact temperature of sliding surfaces, thus contributing to increase the components service life and to save energy. This review includes the use of MLCs in lubrication, and dispersions of MLCs in conventional polymers (PDMLCs). Finally, new lubricating system composed of MLC blends with surfactants, ionic liquids or nanophases are considered.

  6. Liquid Crystal Motion Picture Projector①

    Institute of Scientific and Technical Information of China (English)

    SHIYongji

    1997-01-01

    A liquid crystal moving picture projector and method are described.Light incident on a liquid crystal display-type device is selectively scattered or transmitted by respective portions of liquid crystal display,and a projection mechanism projects an image formed by either such scattered light or such transmitted light.A liquid cystal moving picture projector includes a liquid crystal display for creating characteristics of an image,and projecttion optics for projecting images sequentially created by the display.The display includes a liquid crystal material capable of temporary storing information at respective areas.The temporary storage may be a function of charge storing directly on liquid crystal material.A method of projecting plural images in sequence includes:creating an image or characteristics of an image in a liquid crystal material,storing such image in such liquid crystal material,directing light at such liquid crystal material,projecting such image as a function of light transmitted through or scattered by such liquid crystal material,and creating a further image in such liquid crystal material for subsequent projection.

  7. Liquid crystal dimers

    CERN Document Server

    Kumar Pal, Santanu

    2017-01-01

    This book covers in-depth discussion of design principles, synthesis and thermal behavior of all types of liquid crystal (LC) dimers. The text presents recent advances in the field of LC dimers consisting of different mesogenic units such as calamitic, discotic and bent-core molecules. It starts with a chapter on the introduction of liquid crystal dimers, including their odd-even behavior, basic classification of dimers and common mesophases in dimers. The text shows how the molecular architectures are being used to develop new materials to study a range of interesting phenomena such as the biaxial nematic phase containing rod-like and disc-like mesogenic units. Finally, the text presents perspectives related to technological relevance of these dimers such as dopants in LC display mixtures exhibiting faster relaxation time, strong flexoelectric coupling and others to effect control over the properties of these materials.

  8. Liquid crystal colloids

    CERN Document Server

    Muševič, Igor

    2017-01-01

    This book brings together the many concepts and discoveries in liquid crystal colloids contributed over the last twenty years and scattered across numerous articles and book chapters. It provides both a historical overview of the development of the field and a clear perspective on the future applications in photonics. The book covers all phenomena observed in liquid crystal colloids with an emphasis on experimental tools and applications of topology in condensed matter, as well as practical micro-photonics applications. It includes a number of spectacular manifestations of new topological phenomena not found or difficult to observe in other systems. Starting from the early works on nematic colloids, it explains the basics of topological defects in ordered media, charge and winding, and the elastic forces between colloidal particles in nematics. Following a detailed description of experimental methods, such as optical tweezing and particle tracking, the book eases the reader into the theoretical part, which de...

  9. Textures of liquid crystals

    CERN Document Server

    Dierking, Ingo

    2006-01-01

    A unique compendium of knowledge on all aspects of the texture of liquid crystals, providing not just detailed information on texture formation and determination, but also an in-depth discussion of different characterization methods. Experts as well as graduates entering the field will find all the information they need in this handbook, while the magnitude of the color images make it valuable hands-on-reference.

  10. Living liquid crystals

    Science.gov (United States)

    Zhou, Shuang; Sokolov, Andrey; Lavrentovich, Oleg D.; Aranson, Igor S.

    2014-01-01

    Collective motion of self-propelled organisms or synthetic particles, often termed “active fluid,” has attracted enormous attention in the broad scientific community because of its fundamentally nonequilibrium nature. Energy input and interactions among the moving units and the medium lead to complex dynamics. Here, we introduce a class of active matter––living liquid crystals (LLCs)––that combines living swimming bacteria with a lyotropic liquid crystal. The physical properties of LLCs can be controlled by the amount of oxygen available to bacteria, by concentration of ingredients, or by temperature. Our studies reveal a wealth of intriguing dynamic phenomena, caused by the coupling between the activity-triggered flow and long-range orientational order of the medium. Among these are (i) nonlinear trajectories of bacterial motion guided by nonuniform director, (ii) local melting of the liquid crystal caused by the bacteria-produced shear flows, (iii) activity-triggered transition from a nonflowing uniform state into a flowing one-dimensional periodic pattern and its evolution into a turbulent array of topological defects, and (iv) birefringence-enabled visualization of microflow generated by the nanometers-thick bacterial flagella. Unlike their isotropic counterpart, the LLCs show collective dynamic effects at very low volume fraction of bacteria, on the order of 0.2%. Our work suggests an unorthodox design concept to control and manipulate the dynamic behavior of soft active matter and opens the door for potential biosensing and biomedical applications. PMID:24474746

  11. Instabilities in liquid crystals

    CERN Document Server

    Barclay, G J

    1998-01-01

    and we examine the differences which occur for differing dielectric anisotropies. Finally, in Chapter 7 we study how a sample of smectic C liquid crystal behaves when it is subjected to a uniform shear flow within the smectic plane. We find travelling wave solutions for the behaviour of the c-director and adapt these solutions to incorporate the effects of an applied field. This thesis contains theoretical work dealing with the effects of magnetic and electric fields on samples of nematic, smectic A and smectic C liquid crystals. Some background material along with the continuum theory is introduced in Chapter 2. In Chapter 3 we consider the effect on the director within an infinite sample of nematic liquid crystal which is subjected to crossed electric and magnetic fields. In particular we examine the stability of the travelling waves which describe the director motion by considering the behaviour of the stable perturbations as time increases. The work of Chapter 4 examines a bounded sample of smectic A liqu...

  12. Electrically tunable liquid crystal photonic bandgap fiber laser

    DEFF Research Database (Denmark)

    Olausson, Christina Bjarnal Thulin; Scolari, Lara; Wei, Lei;

    2010-01-01

    We demonstrate electrical tunability of a fiber laser by using a liquid crystal photonic bandgap fiber. Tuning of the laser is achieved by combining the wavelength filtering effect of a liquid crystal photonic bandgap fiber device with an ytterbium-doped photonic crystal fiber. We fabricate an al...

  13. Analysis of liquid crystal properties for photonic crystal fiber devices

    DEFF Research Database (Denmark)

    Weirich, Johannes; Lægsgaard, Jesper; Wei, Lei

    2009-01-01

    We analyze the bandgap structure of Liquid Crystal infiltrated Photonic Crystal Fibers depending on the parameters of the Liquid Crystals by means of finite element simulations. For a biased Liquid Crystal Photonic Crystal Fiber, we show how the tunability of the bandgap position depends...... on the Liquid Crystal parameters....

  14. Crystallization of undercooled liquid fenofibrate.

    Science.gov (United States)

    Amstad, Esther; Spaepen, Frans; Weitz, David A

    2015-11-28

    Formulation of hydrophobic drugs as amorphous materials is highly advantageous as this increases their solubility in water and therefore their bioavailability. However, many drugs have a high propensity to crystallize during production and storage, limiting the usefulness of amorphous drugs. We study the crystallization of undercooled liquid fenofibrate, a model hydrophobic drug. Nucleation is the rate-limiting step; once seeded with a fenofibrate crystal, the crystal rapidly grows by consuming the undercooled liquid fenofibrate. Crystal growth is limited by the incorporation of molecules into its surface. As nucleation and growth both entail incorporation of molecules into the surface, this process likely also limits the formation of nuclei and thus the crystallization of undercooled liquid fenofibrate, contributing to the good stability of undercooled liquid fenofibrate against crystallization.

  15. FABRICATION OF PHOTONIC CRYSTAL WITH SUPERLATTICES

    Institute of Scientific and Technical Information of China (English)

    SUN Cheng; Chen Haihua; Zhang Jizhong; Wei Hongmei; Gu Zhongze

    2006-01-01

    A novel technique was used to fabricate three-dimensional photonic crystals with superlattices. The super structure was fabricated by assembling monodispersed microspheres in the grooves of the scales of morpho butterfly, which makes the photonic crystal being composed of two kinds of different photonic structures (natural groove structure of butterfly wing and artificial microspherical colloids arrangement). The superstructural photonic crystal exhibits some unique optical properties different from both the butterfly wing and the colloidal crystal. The approach exhibited here provides a new way for fabricate photonic crystals with superlattices.

  16. Morphological appearances and photo-controllable coloration of dye-doped cholesteric liquid crystal/polymer coaxial microfibers fabricated by coaxial electrospinning technique.

    Science.gov (United States)

    Lin, Jia-De; Chen, Che-Pei; Chen, Lin-Jer; Chuang, Yu-Chou; Huang, Shuan-Yu; Lee, Chia-Rong

    2016-02-08

    This study systematically investigates the morphological appearance of azo-chiral dye-doped cholesteric liquid crystal (DDCLC)/polymer coaxial microfibers obtained through the coaxial electrospinning technique and examines, for the first time, their photocontrollable reflection characteristics. Experimental results show that the quasi-continuous electrospun microfibers can be successfully fabricated at a high polymer concentration of 17.5 wt% and an optimum ratio of 2 for the feeding rates of sheath to core materials at 25 °C and a high humidity of 50% ± 2% in the spinning chamber. Furthermore, the optical controllability of the reflective features for the electrospun fibers is studied in detail by changing the concentration of the azo-chiral dopant in the core material, the UV irradiation intensity, and the core diameter of the fibers. Relevant mechanisms are addressed to explain the optical-control behaviors of the DDCLC coaxial fibers. Considering the results, optically controllable DDCLC coaxial microfibers present potential applications in UV microsensors and wearable smart textiles or swabs.

  17. Modeling liquid crystal polymeric devices

    Science.gov (United States)

    Gimenez Pinto, Vianney Karina

    The main focus of this work is the theoretical and numerical study of materials that combine liquid crystal and polymer. Liquid crystal elastomers are polymeric materials that exhibit both the ordered properties of the liquid crystals and the elastic properties of rubbers. Changing the order of the liquid crystal molecules within the polymer network can induce shape change. These materials are very valuable for applications such as actuators, sensors, artificial muscles, haptic displays, etc. In this work we apply finite element elastodynamics simulations to study the temperature induced shape deformation in nematic elastomers with complex director microstructure. In another topic, we propose a novel numerical method to model the director dynamics and microstructural evolution of three dimensional nematic and cholesteric liquid crystals. Numerical studies presented in this work are in agreement with experimental observations and provide insight into the design of application devices.

  18. Polymer-dispersed liquid crystal elastomers

    Science.gov (United States)

    Rešetič, Andraž; Milavec, Jerneja; Zupančič, Blaž; Domenici, Valentina; Zalar, Boštjan

    2016-10-01

    The need for mechanical manipulation during the curing of conventional liquid crystal elastomers diminishes their applicability in the field of shape-programmable soft materials and future applications in additive manufacturing. Here we report on polymer-dispersed liquid crystal elastomers, novel composite materials that eliminate this difficulty. Their thermal shape memory anisotropy is imprinted by curing in external magnetic field, providing for conventional moulding of macroscopically sized soft, thermomechanically active elastic objects of general shapes. The binary soft-soft composition of isotropic elastomer matrix, filled with freeze-fracture-fabricated, oriented liquid crystal elastomer microparticles as colloidal inclusions, allows for fine-tuning of thermal morphing behaviour. This is accomplished by adjusting the concentration, spatial distribution and orientation of microparticles or using blends of microparticles with different thermomechanical characteristics. We demonstrate that any Gaussian thermomechanical deformation mode (bend, cup, saddle, left and right twist) of a planar sample, as well as beat-like actuation, is attainable with bilayer microparticle configurations.

  19. Electrically tunable liquid crystal photonic bandgap fiber laser

    DEFF Research Database (Denmark)

    Olausson, Christina Bjarnal Thulin; Scolari, Lara; Wei, Lei

    2010-01-01

    We demonstrate electrical tunability of a fiber laser by using a liquid crystal photonic bandgap fiber. Tuning of the laser is achieved by combining the wavelength filtering effect of a liquid crystal photonic bandgap fiber device with an ytterbium-doped photonic crystal fiber. We fabricate an all......-spliced laser cavity based on a liquid crystal photonic bandgap fiber mounted on a silicon assembly, a pump/signal combiner with single-mode signal feed-through and an ytterbium-doped photonic crystal fiber. The laser cavity produces a single-mode output and is tuned in the range 1040-1065nm by applying...

  20. Periodically-segmented liquid crystal core waveguides

    Science.gov (United States)

    Sharma, Mukesh; Shenoy, M. R.; Sinha, Aloka

    2017-09-01

    We report the fabrication and characterization of electrically-tunable periodically segmented waveguides (PSWs) with different duty cycles of 0.25, 0.33, 0.50 and 0.76, using the nematic liquid crystal 5CB as the guiding layer, and the negative photoresist AZ15nXT as the cladding. The experimental results show that light diffracts and re-focuses periodically on propagation through the liquid crystal (LC) core PSW, when an external voltage is applied to the periodically segmented electrodes. The performance of the fabricated LC core PSWs are analyzed in terms of effective refractive index, output power and duty cycle. The electrically-tunable LC core PSWs have potential application in the realization of optical filters, polarizers and dynamic mode size converters.

  1. Nanoscience with liquid crystals from self-organized nanostructures to applications

    CERN Document Server

    Li, Quan

    2014-01-01

    This book focuses on the exciting topic of nanoscience with liquid crystals: from self-organized nanostructures to applications. The elegant self-organized liquid crystalline nanostructures, the synergetic characteristics of liquid crystals and nanoparticles, liquid crystalline nanomaterials, synthesis of nanomaterials using liquid crystals as templates, nanoconfinement and nanoparticles of liquid crystals are covered and discussed, and the prospect of fabricating functional materials is highlighted. Contributions, collecting the scattered literature of the field from leading and active player

  2. Enhanced photocatalytic performance of mesoporous TiO{sub 2} coated SBA-15 nanocomposites fabricated through a novel approach: supercritical deposition aided by liquid-crystal template

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Chen; Lin, Xiao; Li, Youji, E-mail: bcclyj@163.com; Xu, Peng; Li, Ming; Chen, Feitai

    2016-03-15

    Highlights: • Highly uniform mesoporous TiO{sub 2} nanopartices were coated SBA-15. • MT showed smaller crystallite size, higher hydroxyl content and surface area. • MT/SBA-15 show enhanced photocatalytic activity and high reused activity. • The optimum MT loading rate and calcination temperature were obtained to be 15% and 400 °C, respectively. • Photocatalytic behaviors are discussed in terms of the Langmuir–Hinshelwood model. - Abstract: Mesoporous TiO2 coated SBA-15 (MT@S) nanocomposites were fabricated through supercritical CO{sub 2} deposition aided by liquid-crystal template. The as-prepared samples were characterized by transmission electron microscopy, X-ray photoelectron spectroscopy, diffuse reflectance spectroscopy and so on. The results reveal that MT uniformly deposited onto silica with titania incorporated in SBA-15 channels, showed smaller crystallite size, higher hydroxyl content and surface area than nonporous TiO{sub 2} coated SBA-15 (NT@S) obtained by a similar route without template. With TiO{sub 2} loading ratio of 15 wt% and calcination temperature of 400 °C, 15%MT@S-400 showed the enhanced degradation efficiency for azo dyes (methylene blue, methyl orange, and rhodamine B) and phenol in comparsion with 15%NT@S-400, due to those improved textural and physicochemical properties. Meanwhile, the reused MT@S also showed high photoactivity. Additionally, the effects of MT content and calcination temperature have been examined as operational parameters. Photocatalytic reactions followed pseudo-first-order kinetics and are discussed in terms of the Langmuir–Hinshelwood model.

  3. Analysis of liquid crystal properties for photonic crystal fiber devices

    DEFF Research Database (Denmark)

    Weirich, Johannes; Lægsgaard, Jesper; Wei, Lei;

    2009-01-01

    We analyze the bandgap structure of Liquid Crystal infiltrated Photonic Crystal Fibers depending on the parameters of the Liquid Crystals by means of finite element simulations. For a biased Liquid Crystal Photonic Crystal Fiber, we show how the tunability of the bandgap position depends on the L...

  4. Liquid Crystals for Nondestructive Evaluation

    Science.gov (United States)

    1978-09-01

    Temperatures TI > T2 > - > TS defects was possible using the liquid crystal. are the Average TemperatursI Thes Resptivegi. Kapfer , Burns, Salvo, and Doyle...Means of Liquid Crystals,’ J. 38 .1; .1 of Sound and Vibration, Vol. 36, No. 3, pp. 407- 65. V.C. Kapfer , D.J. Bums, C.J. Salvo, and E.A. 15, Oct. 1974

  5. Adaptive Liquid Crystal Windows

    Energy Technology Data Exchange (ETDEWEB)

    Taheri, Bahman; Bodnar, Volodymyr

    2011-12-31

    Energy consumption by private and commercial sectors in the U.S. has steadily grown over the last decade. The uncertainty in future availability of imported oil, on which the energy consumption relies strongly, resulted in a dramatic increase in the cost of energy. About 20% of this consumption are used to heat and cool houses and commercial buildings. To reduce dependence on the foreign oil and cut down emission of greenhouse gases, it is necessary to eliminate losses and reduce total energy consumption by buildings. To achieve this goal it is necessary to redefine the role of the conventional windows. At a minimum, windows should stop being a source for energy loss. Ideally, windows should become a source of energy, providing net gain to reduce energy used to heat and cool homes. It is possible to have a net energy gain from a window if its light transmission can be dynamically altered, ideally electronically without the need of operator assistance, providing optimal control of the solar gain that varies with season and climate in the U.S. In addition, the window must not require power from the building for operation. Resolution of this problem is a societal challenge and of national interest and will have a broad global impact. For this purpose, the year-round, allclimate window solution to provide an electronically variable solar heat gain coefficient (SHGC) with a wide dynamic range is needed. AlphaMicron, Inc. (AMI) developed and manufactured 1ft × 1ft prototype panels for the world’s first auto-adjusting Adaptive Liquid Crystal Windows (ALCWs) that can operate from sunlight without the need for external power source and demonstrate an electronically adjustable SHGC. This novel windows are based on AlphaMicron’s patented e-Tint® technology, a guesthost liquid crystal system implemented on flexible, optically clear plastic films. This technology is suitable both for OEM and aftermarket (retro-fitting) lamination to new and existing windows. Low level of

  6. Electrically tunable bandpass filter using solid-core photonic crystal fibers filled with multiple liquid crystals

    DEFF Research Database (Denmark)

    Wei, Lei; Alkeskjold, Thomas Tanggaard; Bjarklev, Anders Overgaard

    2010-01-01

    An electrically tunable bandpass filter is designed and fabricated by integrating two solid-core photonic crystal fibers filled with different liquid crystals in a double silicon v-groove assembly. By separately controlling the driving voltage of each liquid-crystal-filled section, both the short......-wavelength edge and the long-wavelength edge of the bandpass filter are tuned individually or simultaneously with the response time in the millisecond range....

  7. Fabrication of tensile-strained single-crystalline GeSn on transparent substrate by nucleation-controlled liquid-phase crystallization

    Science.gov (United States)

    Oka, Hiroshi; Amamoto, Takashi; Koyama, Masahiro; Imai, Yasuhiko; Kimura, Shigeru; Hosoi, Takuji; Shimura, Takayoshi; Watanabe, Heiji

    2017-01-01

    We developed a method of forming single-crystalline germanium-tin (GeSn) alloy on transparent substrates that is based on liquid-phase crystallization. By controlling and designing nucleation during the melting growth process, a highly tensile-strained single-crystalline GeSn layer was grown on a quartz substrate without using any crystal-seeds or catalysts. The peak field-effect hole mobility of 423 cm2/V s was obtained for a top-gate single-crystalline GeSn MOSFET on a quartz substrate with a Sn content of 2.6%, indicating excellent crystal quality and mobility enhancement due to Sn incorporation and tensile strain.

  8. Large three-dimensional photonic crystals based on monocrystalline liquid crystal blue phases.

    Science.gov (United States)

    Chen, Chun-Wei; Hou, Chien-Tsung; Li, Cheng-Chang; Jau, Hung-Chang; Wang, Chun-Ta; Hong, Ching-Lang; Guo, Duan-Yi; Wang, Cheng-Yu; Chiang, Sheng-Ping; Bunning, Timothy J; Khoo, Iam-Choon; Lin, Tsung-Hsien

    2017-09-28

    Although there have been intense efforts to fabricate large three-dimensional photonic crystals in order to realize their full potential, the technologies developed so far are still beset with various material processing and cost issues. Conventional top-down fabrications are costly and time-consuming, whereas natural self-assembly and bottom-up fabrications often result in high defect density and limited dimensions. Here we report the fabrication of extraordinarily large monocrystalline photonic crystals by controlling the self-assembly processes which occur in unique phases of liquid crystals that exhibit three-dimensional photonic-crystalline properties called liquid-crystal blue phases. In particular, we have developed a gradient-temperature technique that enables three-dimensional photonic crystals to grow to lateral dimensions of ~1 cm (~30,000 of unit cells) and thickness of ~100 μm (~ 300 unit cells). These giant single crystals exhibit extraordinarily sharp photonic bandgaps with high reflectivity, long-range periodicity in all dimensions and well-defined lattice orientation.Conventional fabrication approaches for large-size three-dimensional photonic crystals are problematic. By properly controlling the self-assembly processes, the authors report the fabrication of monocrystalline blue phase liquid crystals that exhibit three-dimensional photonic-crystalline properties.

  9. Fundamentals of liquid crystal devices

    CERN Document Server

    Yang, Deng-Ke

    2014-01-01

    Revised throughout to cover the latest developments in the fast moving area of display technology, this 2nd edition of Fundamentals of Liquid Crystal Devices, will continue to be a valuable resource for those wishing to understand the operation of liquid crystal displays. Significant updates include new material on display components, 3D LCDs and blue-phase displays which is one of the most promising new technologies within the field of displays and it is expected that this new LC-technology will reduce the response time and the number of optical components of LC-modules. Prof. Yang is a pion

  10. Research on colored lyotropic liquid crystals

    Institute of Scientific and Technical Information of China (English)

    WEI Xilian; YIN Baolin; SUN Dezhi; LIU Jie; WANG Zhongni; LI Ganzuo

    2005-01-01

    Splendidly colored lyotropic liquid crystals formed in the ternary system of a novel cationic surfactant, 3-p-nonylphenoxy-2-hydroxypropyl trimethyl ammonium bromide (NPTAB)-n-butanol-water system, had been observed under polarized light microscope. Small-angle X-ray scattering (SAXS), 2H (deuterium) quadrupolar splitting (2H NMR) were employed to confirm the structures of these liquid crystals. The structural transformation of these special lyotropic liquid crystals had been confirmed by differential scanning calorimetry (DSC). The influences of liquid crystal film thickness, temperature and conserving time on the color of liquid crystals have been investigated. It is also theoretically discussed for forming and changing of liquid crystal color.

  11. Bicontinuous liquid crystals

    CERN Document Server

    Lynch, Mathew L

    2005-01-01

    PrefaceIntroduction AcknowledgmentsBicontinuous Cubic Liquid Crystalline Materials: A Historical Perspective and Modern Assessment; Kr̄e LarssonIntermediate Phases; Michael C. Holmes and Marc S. LeaverCubic Phases and Human Skin: Theory and Practice; Steven Hoath and Lars NorlňThe Relationship between Bicontinuous Inverted Cubic Phases and Membrane Fusion; D.P. SiegelAspects of the Differential Geometry and Topology of Bicontinuous Liquid-Crystalline Phases; Robert W. CorkeryNovel L3 Phases and Their Macroscopic Properties; R. Beck and H. HoffmannBicontinuous Cubic Phases of Lipids with Entra

  12. Infrared Sensor with Liquid Crystal Chopper

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    An infrared sensor using the liquid crystal chopper is presented. The infrared sensor is designed to detect infrared rays with a pyroelectric element used as a liquid crystal chopper in such an infrared sensor or the like.

  13. Emerging Technologies of Liquid Crystal Displays

    Institute of Scientific and Technical Information of China (English)

    Sin-Doo Lee; Chang-Jae Yu; Jae-Hong Park; Min-Sik Jung

    2003-01-01

    The general features and the emerging technologies of liquid crystal displays are described from the viewpoints of wide viewing and fast response technologies. The device applications of liquid crystals for optical communications are also described.

  14. Color changing plasmonic surfaces utilizing liquid crystal (Conference Presentation)

    Science.gov (United States)

    Franklin, Daniel; Wu, Shin-Tson; Chanda, Debashis

    2016-09-01

    Plasmonic structural color has recently garnered significant interest as an alternative to the organic dyes standard in print media and liquid crystal displays. These nanostructured metallic systems can produce diffraction limited images, be made polarization dependent, and exhibit resistance to color bleaching. Perhaps even more advantageous, their optical characteristics can also be tuned, post-fabrication, by altering the surrounding media's refractive index parallel to the local plasmonic fields. A common material with which to achieve this is liquid crystal. By reorienting the liquid crystal molecules through external electric fields, the optical resonances of the plasmonic filters can be dynamically controlled. Demonstrations of this phenomenon, however, have been limited to modest shifts in plasmon resonance. Here, we report a liquid crystal-plasmonic system with an enhanced tuning range through the use of a shallow array of nano-wells and high birefringent liquid crystal. The continuous metallic nanostructure maximizes the overlap between plasmonic fields and liquid crystal while also allowing full reorientation of the liquid crystal upon an applied electric field. Sweeping over structural dimensions and voltages results in a color palette for these dynamic reflective pixels that can further be exploited to create color tunable images. These advances make plasmonic-liquid crystal systems more attractive candidates for filter, display, and other tunable optical technologies.

  15. Orthoconic liquid crystals--a case study.

    Science.gov (United States)

    Lagerwall, Sven T

    2014-06-01

    Since the early investigations on liquid crystals it was realized how the confining surfaces often determine the textures and even properties of the material. This influence is particularly complex and important for chiral materials. When we come to chiral smectics the surfaces may have dramatic effects. These are illustrated on the ferroelectric liquid crystals; they then again increase in importance for the antiferroelectric liquid crystals where the most recent example is given by the orthoconic liquid crystals.

  16. Liquid crystal polyester thermosets

    Science.gov (United States)

    Benicewicz, Brian C.; Hoyt, Andrea E.

    1992-01-01

    The present invention provides (1) curable liquid crystalline polyester monomers represented by the formula: R.sup.1 --A.sup.1 --B.sup.1 --A.sup.2 --B.sup.2 --A.sup.3 --R.sup.2 where R.sup.1 and R.sup.2 are radicals selected from the group consisting of maleimide, substituted maleimide, nadimide, substituted naimide, ethynyl, and (C(R.sup.3).sub.2).sub.2 where R.sup.3 is hydrogen with the proviso that the two carbon atoms of (C(R.sup.3).sub.2).sub.2 are bound on the aromatic ring of A.sup.1 or A.sup.3 to adjacent carbon atoms, A.sup.1 and A.sup.3 are 1,4-phenylene and the same where said group contains one or more substituents selected from the group consisting of halo, e.g., fluoro, chloro, bromo, or iodo, nitro lower alkyl, e.g., methyl, ethyl, or propyl, alkoxy, e.g., methoxy, ethoxy, or propoxy, and fluoroalkyl, e.g., trifluoromethyl, pentafluoroethyl and the like, A.sup.2 is selected from the group consisting of 1,4-phenylene, 4,4'-biphenyl, 2,6-naphthylene and the same where said groups contain one or more substituents selected from the group consisting of halo, e.g., fluoro, chloro, bromo, or iodo, nitro, lower alkyl, e.g., methyl, ethyl, and propyl, lower alkoxy, e.g., methoxy, ethoxy, or propoxy, and fluoroalkyl or fluoroalkoxy, e.g., trifluoromethyl, pentafluoroethyl and the like, and B.sup.1 and B.sup.2 are selected from the group consisting of --C(O)--O-- and --O--C(O)--, (2) thermoset liquid crystalline polyester compositions comprised of heat-cured segments derived from monomers represented by the formula: R.sup.1 --A.sup.1 --B.sup.1 --A.sup.2 --B.sup.2 --A.sup.3 --R.sup.2 as described above, (3) curable blends of at least two of the polyester monomers and (4) processes of preparing the curable liquid crystalline polyester monomers.

  17. Liquid crystal displays for aircraft engineering

    Directory of Open Access Journals (Sweden)

    Kovalenko L. F.

    2009-06-01

    Full Text Available Operating conditions for liquid-crystal displays of aircraft instruments have been examined. Requirements to engineering of a liquid-crystal display for operation in severe environment have been formulated. The implementation options for liquid-crystal matrix illumination have been analyzed in order to ensure the sufficient brightness depending on external illumination of a display screen.

  18. Liquid Crystal Microlenses for Autostereoscopic Displays

    Directory of Open Access Journals (Sweden)

    José Francisco Algorri

    2016-01-01

    Full Text Available Three-dimensional vision has acquired great importance in the audiovisual industry in the past ten years. Despite this, the first generation of autostereoscopic displays failed to generate enough consumer excitement. Some reasons are little 3D content and performance issues. For this reason, an exponential increase in three-dimensional vision research has occurred in the last few years. In this review, a study of the historical impact of the most important technologies has been performed. This study is carried out in terms of research manuscripts per year. The results reveal that research on spatial multiplexing technique is increasing considerably and today is the most studied. For this reason, the state of the art of this technique is presented. The use of microlenses seems to be the most successful method to obtain autostereoscopic vision. When they are fabricated with liquid crystal materials, extended capabilities are produced. Among the numerous techniques for manufacturing liquid crystal microlenses, this review covers the most viable designs for its use in autostereoscopic displays. For this reason, some of the most important topologies and their relation with autostereoscopic displays are presented. Finally, the challenges in some recent applications, such as portable devices, and the future of three-dimensional displays based on liquid crystal microlenses are outlined.

  19. Liquid crystals. Oligomeric and polymeric materials for soft photonic technologies

    CERN Document Server

    Coles, M J

    2002-01-01

    The current pace of today's information technologies might lead the casual observer to believe that this is all new. However the reality is that, as with most things, this is really a long evolution of processes based on tried, tested and re-adapted techniques. This thesis represents 12 years of predominantly technology driven research and covers a whole range of characterising, evaluating and fabricating devices based on liquid crystalline systems. Firstly polymer liquid crystals are discussed with respect to the fabrication of a flexible substrate display based on standard printing techniques and this is shown to have improved display viewing properties over a standard polymer dispersed liquid crystal (PDLC) device. Following on from this work is presented that involves the production of regular grid arrays in isotropic polymers that are used as control structures in nematic liquid crystal systems. This progresses onto a now patented device that allows the production of robust ferroelectric devices based on...

  20. Function Spaces for Liquid Crystals

    Science.gov (United States)

    Bedford, Stephen

    2016-02-01

    We consider the relationship between three continuum liquid crystal theories: Oseen-Frank, Ericksen and Landau-de Gennes. It is known that the function space is an important part of the mathematical model and by considering various function space choices for the order parameters s, n, and Q, we establish connections between the variational formulations of these theories. We use these results to justify a version of the Oseen-Frank theory using special functions of bounded variation. This proposed model can describe both orientable and non-orientable defects. Finally we study a number of frustrated nematic and cholesteric liquid crystal systems and show that the model predicts the existence of point and surface discontinuities in the director.

  1. Liquid Crystals and Photonic Bandgap Fiber Components

    DEFF Research Database (Denmark)

    Weirich, Johannes; Wei, Lei; Scolari, Lara

    Liquid Crystal(LC)filled Photonic Crystal Fibers(PCFs) represent a promising platform for the design and the fabrication of tunable all-in fiber devices. Tunability is achieved by varying the refractive index of the LC thermally, optically or electrically. In this contribution we present important...... parts of the LC theory as well as an application of a LC infiltrated PCF subject to an external electrostatic field. The fiber is placed between two electrodes and the voltage is increased step by step leading to the reorientation of the LC in the fiber capillaries. This mechanism can be used to produce...... a swichable polarizer, and an on chip LC photonic bandgap fiber polarimeter is presented, which admits strong attenuation of one polarization direction while the other one is nearly unaffected....

  2. Modal liquid crystal wavefront corrector.

    Science.gov (United States)

    Kotova, S; Kvashnin, M; Rakhmatulin, M; Zayakin, O; Guralnik, I; Klimov, N; Clark, P; Love, Gordon; Naumov, A; Saunter, C; Loktev, M; Vdovin, G; Toporkova, L

    2002-11-04

    Results are presented of the properties of a liquid crystal wavefront corrector for adaptive optics. The device is controlled using modal addressing in which case the device behaves more like a continuous facesheet deformable mirror than a segmented one. Furthermore, the width and shape of the influence functions are electrically controllable. We describe the construction of the device, the optical properties, and we show experimental results of low order aberration generation.

  3. Swimming bacteria in liquid crystal

    Science.gov (United States)

    Sokolov, Andrey; Zhou, Shuang; Aranson, Igor; Lavrentovich, Oleg

    2014-03-01

    Dynamics of swimming bacteria can be very complex due to the interaction between the bacteria and the fluid, especially when the suspending fluid is non-Newtonian. Placement of swimming bacteria in lyotropic liquid crystal produces a new class of active materials by combining features of two seemingly incompatible constituents: self-propelled live bacteria and ordered liquid crystals. Here we present fundamentally new phenomena caused by the coupling between direction of bacterial swimming, bacteria-triggered flows and director orientations. Locomotion of bacteria may locally reduce the degree of order in liquid crystal or even trigger nematic-isotropic phase transition. Microscopic flows generated by bacterial flagella disturb director orientation. Emerged birefringence patterns allow direct optical observation and quantitative characterization of flagella dynamics. At high concentration of bacteria we observed the emergence of self-organized periodic texture caused by bacteria swimming. Our work sheds new light on self-organization in hybrid bio-mechanical systems and can lead to valuable biomedical applications. Was supported by the US DOE, Office of Basic Energy Sciences, Division of Materials Science and Engineering, under the Contract No. DE AC02-06CH11357.

  4. Liquid crystals in biotribology synovial joint treatment

    CERN Document Server

    Ermakov, Sergey; Eismont, Oleg; Nikolaev, Vladimir

    2016-01-01

    This book summarizes the theoretical and experimental studies confirming the concept of the liquid-crystalline nature of boundary lubrication in synovial joints. It is shown that cholesteric liquid crystals in the synovial liquid play a significant role in the mechanism of intra-articular friction reduction. The results of structural, rheological and tribological research of the creation of artificial synovial liquids - containing cholesteric liquid crystals in natural synovial liquids - are described. These liquid crystals reproduce the lubrication properties of natural synovia and provide a high chondroprotective efficiency. They were tested in osteoarthritis models and in clinical practice.

  5. Holographic polymer-dispersed liquid crystal Bragg grating integrated inside a solid core photonic crystal fiber

    CERN Document Server

    Zito, Gianluigi

    2013-01-01

    A polymer/liquid crystal-based fiber Bragg grating (PLC-FBG) is fabricated with visible two-beam holography by photo-induced modulation of a pre-polymer/LC solution infiltrated into the hollow channels of a solid core photonic crystal fiber (PCF). The fabrication process and effects related to the photonic bandgap guidance into the infiltrated PCF, and characterization of the PLC-FBG are discussed. Experimental data here presented, demonstrate that the liquid crystal inclusions of the PLC-FBG lead to high thermal and bending sensitivities. The microscopic behavior of the polymer/liquid crystal phase separation inside the PCF capillaries is examined using scanning electron microscopy, while further discussed.

  6. Thermally switchable flexible liquid crystal devices in prepolymer-doped cholesteric liquid crystals

    Science.gov (United States)

    Fuh, A. Y.-G.; Li, J.-H.; Cheng, K.-T.

    2010-10-01

    This work describes an approach for fabricating thermally switchable flexible liquid crystal devices in prepolymer-doped cholesteric liquid crystals (CLCs). The roughness of the UV-cured polymer film eliminates the stability of planar CLCs, allowing the textures in the UV-cured regions to be changed from planar to focal conic. Impurities associated with doping with prepolymers cause the clearing temperature of LCs in the UV-cured regions to differ from that in the uncured regions as the prepolymers are polymerized. Therefore, the textures in these two regions can be switched by controlling the temperature. Thermally switchable flexible LC devices, such as optically addressed smart cards, light valves, and others, can be realized using this approach.

  7. Liquid crystal infiltration of complex dielectrics

    NARCIS (Netherlands)

    Gottardo, Stefano; Wiersma, Diederik S.; Vos, Willem L.

    2003-01-01

    Liquid crystal infiltration is becoming an important tool to control the optical properties of complex dielectric systems like photonic crystals and disordered dielectrics. We discuss the technical aspects of liquid crystal infiltration in meso-porous structures, give some details of the sample

  8. Holographic Polymer-Dispersed Liquid Crystals: Materials, Formation, and Applications

    Directory of Open Access Journals (Sweden)

    Y. J. Liu

    2008-01-01

    Full Text Available By combining polymer-dispersed liquid crystal (PDLC and holography, holographic PDLC (H-PDLC has emerged as a new composite material for switchable or tunable optical devices. Generally, H-PDLC structures are created in a liquid crystal cell filled with polymer-dispersed liquid crystal materials by recording the interference pattern generated by two or more coherent laser beams which is a fast and single-step fabrication. With a relatively ideal phase separation between liquid crystals and polymers, periodic refractive index profile is formed in the cell and thus light can be diffracted. Under a suitable electric field, the light diffraction behavior disappears due to the index matching between liquid crystals and polymers. H-PDLCs show a fast switching time due to the small size of the liquid crystal droplets. So far, H-PDLCs have been applied in many promising applications in photonics, such as flat panel displays, switchable gratings, switchable lasers, switchable microlenses, and switchable photonic crystals. In this paper, we review the current state-of-the-art of H-PDLCs including the materials used to date, the grating formation dynamics and simulations, the optimization of electro-optical properties, the photonic applications, and the issues existed in H-PDLCs.

  9. Perspectives in active liquid crystals.

    Science.gov (United States)

    Majumdar, Apala; Cristina, Marchetti M; Virga, Epifanio G

    2014-11-28

    Active soft matter is a young, growing field, with potential applications to a wide variety of systems. This Theme Issue explores this emerging new field by highlighting active liquid crystals. The collected contributions bridge theory to experiment, mathematical theories of passive and active nematics, spontaneous flows to defect dynamics, microscopic to continuum levels of description, spontaneous activity to biological activation. While the perspectives offered here only span a small part of this rapidly evolving field, we trust that they might provide the interested reader with a taste for this new class of non-equilibrium systems and their rich behaviour.

  10. Biased liquid crystal photonic bandgap fiber

    DEFF Research Database (Denmark)

    Weirich, Johannes; Lægsgaard, Jesper; Alkeskjold, Thomas Tanggaard

    2008-01-01

    We simulate the director structure of all capillaries in a biased photonic crystal fiber infiltrated with liquid crystals. Various mode simulations for different capillaries show the necessity to consider the entire structure.......We simulate the director structure of all capillaries in a biased photonic crystal fiber infiltrated with liquid crystals. Various mode simulations for different capillaries show the necessity to consider the entire structure....

  11. Nanoscopic Manipulation and Imaging of Liquid Crystals

    Energy Technology Data Exchange (ETDEWEB)

    Rosenblatt, Charles S. [Case Western Reserve Univ., Cleveland, OH (United States)

    2014-02-04

    This is the final project report. The project’s goals centered on nanoscopic imaging and control of liquid crystals and surfaces. We developed and refined techniques to control liquid crystal orientation at surfaces with resolution as small as 25 nm, we developed an optical imaging technique that we call Optical Nanotomography that allows us to obtain images inside liquid crystal films with resolution of 60 x 60 x 1 nm, and we opened new thrust areas related to chirality and to liquid crystal/colloid composites.

  12. Polymer Crystallization at Curved Liquid/Liquid Interface

    Science.gov (United States)

    Wang, Wenda

    Liquid/liquid interface, either flat or curved, is a unique template for studying self-assembly of a variety of nanomaterials such as nanoparticles and nanorods. The resultant monolayer films can be ordered or disordered depending on the regularity of the nanomaterials. Integration of nanoparticles into two-dimensional structure leads to intriguing collective properties of the nanoparticles. Crystallization can also be guided by liquid/liquid interface. Due to the particular shape of the interface, crystallization can happen in a different manner comparing to the normal solution crystallization. In this dissertation, liquid/liquid interface is employed to guide the crystallization of polymers, mainly focusing on using curved liquid/liquid interface. Due to the unique shape of the interface and feasibility to control the curvature, polymer crystallization can take place in different manner and lead to the formation of curved or vesicular crystals. Curved liquid/liquid interface is typically created through o/w emulsions. With the presence of surfactant, the emulsions are controlled to be stable at least for the polymer crystallization periods. The difference to normal solution crystallization is: the nuclei will diffuse to the curved interface due to the Pickering effect and guide the crystallization along the curved liquid/liquid interface. If the supercooling can be controlled to be very small, crystal growth in the bulk droplets can be avoided. The advantages of this strategy are: 1) the formation process of vesicular type crystals can be monitored by controlling the polymer supply; 2) curved crystals, bowl-like structures and enclosed capsules can be easily obtained comparing to the self-assembly method for vesicle formation; 3) the obtained vesicles will be made of polymer crystals, which will possess the extraordinary mechanical properties. Based on the nucleation type, this dissertation is divided into two parts. The first part is focused on the self

  13. Liquid crystal devices for photonics applications

    Science.gov (United States)

    Chigrinov, Vladimir G.

    2007-11-01

    Liquid crystal (LC) devices for Photonics applications is a hot topic of research. Such elements begin to appear in Photonics market. Passive elements for fiber optical communication systems (DWDM components) based on LC cells can successfully compete with the other elements used for the purpose, such as micro electromechanical (MEM), thermo-optical, opto-mechanical or acousto-optical devices. Application of nematic and ferroelectric LC for high speed communication systems, producing elements that are extremely fast, stable, durable, of low loss, operable over a wide temperature range, and that require small operating voltages and extremely low power consumption. The known LC applications in fiber optics enable to produce switches, filters, attenuators, equalizers, polarization controllers, phase emulators and other fiber optical components. Good robustness due to the absence of moving parts and compatibility with VLSI technology, excellent parameters in a large photonic wavelength range, whereas the complexity of the design and the cost of the device are equivalent to regular passive matrix LC displays makes LC fiber optical devices very attractive for mass production. We have already successfully fabricated certain prototypes of the optical switches based on ferroelectric and nematic LC materials. The electrooptical modes used for the purpose included the light polarization rotation, voltage controllable diffraction and fast switching of the LC refractive index. We used the powerful software to optimize the LC modulation characteristics. Use of photo-alignment technique pioneered by us makes it possible to develop new LC fiber components. Almost all the criteria of perfect LC alignment are met in case of azo-dye layers. We have already used azo-dye materials to align LC in superthin photonic holes, curved and 3D surfaces and as cladding layers in microring silicon based resonators. The prototypes of new LC efficient Photonics devices are envisaged. Controllable

  14. Planar optics with patterned chiral liquid crystals

    Science.gov (United States)

    Kobashi, Junji; Yoshida, Hiroyuki; Ozaki, Masanori

    2016-06-01

    Reflective metasurfaces based on metallic and dielectric nanoscatterers have attracted interest owing to their ability to control the phase of light. However, because such nanoscatterers require subwavelength features, the fabrication of elements that operate in the visible range is challenging. Here, we show that chiral liquid crystals with a self-organized helical structure enable metasurface-like, non-specular reflection in the visible region. The phase of light that is Bragg-reflected off the helical structure can be controlled over 0-2π depending on the spatial phase of the helical structure; thus planar elements with arbitrary reflected wavefronts can be created via orientation control. The circular polarization selectivity and external field tunability of Bragg reflection open a wide variety of potential applications for this family of functional devices, from optical isolators to wearable displays.

  15. Biased liquid crystal infiltrated photonic bandgap fiber

    DEFF Research Database (Denmark)

    Weirich, Johannes; Lægsgaard, Jesper; Scolari, Lara

    2009-01-01

    A simulation scheme for the transmission spectrum of a photonic crystal fiber infiltrated with a nematic liquid crystal and subject to an external bias is presented. The alignment of the biased liquid crystal is simulated using the finite element method to solve the relevant system of coupled...... partial differential equations. From the liquid crystal alignment the full tensorial dielectric permittivity in the capillaries is derived. The transmission spectrum for the photonic crystal fiber is obtained by solving the generalized eigenvalue problem deriving from Maxwell’s equations using a vector...... element based finite element method. We demonstrate results for a splay aligned liquid crystal infiltrated into the capillaries of a four-ring photonic crystal fiber and compare them to corresponding experiments....

  16. Polymer liquid membrane for nanofiber fabrication

    Directory of Open Access Journals (Sweden)

    Kong Hai-Yan

    2013-01-01

    Full Text Available This paper finds that a polymer liquid membrane can be effectively used for nanomaterials fabrication using a blowing air and an electronic force. Polyvinyl alcohol solution is used to produce membrane on a rotating ring, which passes through periodically the solution, the membrane is deformed into a bubble by the blowing air under the presence of an electrostatic field. The experimental data show that the receptor distance affects the fiber size greatly.

  17. Optical detection of sepsis markers using liquid crystal based biosensors

    Science.gov (United States)

    McCamley, Maureen K.; Artenstein, Andrew W.; Opal, Steven M.; Crawford, Gregory P.

    2007-02-01

    A liquid crystal based biosensor for the detection and diagnosis of sepsis is currently in development. Sepsis, a major clinical syndrome with a significant public health burden in the US due to a large elderly population, is the systemic response of the body to a localized infection and is defined as the combination of pathologic infection and physiological changes. Bacterial infections are responsible for 90% of cases of sepsis in the US. Currently there is no bedside diagnostic available to positively identify sepsis. The basic detection scheme employed in a liquid crystal biosensor contains attributes that would find value in a clinical setting, especially for the early detection of sepsis. Utilizing the unique properties of liquid crystals, such as birefringence, a bedside diagnostic is in development which will optically report the presence of biomolecules. In a septic patient, an endotoxin known as lipopolysaccharide (LPS) is released from the outer membrane of Gram-negative bacteria and can be found in the blood stream. It is hypothesized that this long chained molecule will cause local disruptions to the open surface of a sensor containing aligned liquid crystal. The bulk liquid crystal ampli.es these local changes at the surface due to the presence of the sepsis marker, providing an optical readout through polarizing microscopy images. Liquid crystal sensors consisting of both square and circular grids, 100-200 μm in size, have been fabricated and filled with a common liquid crystal material, 5CB. Homeotropic alignment was confirmed using polarizing microscopy. The grids were then contacted with either saline only (control), or saline with varying concentrations of LPS. Changes in the con.guration of the nematic director of the liquid crystal were observed through the range of concentrations tested (5mg/mL - 1pg/mL) which have been confirmed by a consulting physician as clinically relevant levels.

  18. Diffractive devices based on blue phase liquid crystals

    Science.gov (United States)

    Li, Yan; Huang, Shuaijia; Su, Yikai

    2016-09-01

    Blue phase liquid crystal (BPLC) has been attractive for display and photonic applications for its sub-millisecond response time, no need for surface alignment, and an optically isotropic dark state. Because of these advantages, diffractive devices based on blue phase liquid crystals have great potential for wide applications. In this work, we present several BPLC diffractive devices. The operation principles, fabrication and experimental measurements will be discussed in details for two BPLC gratings realized by holographic method and a BPLC Fresnel lens using a spatial light modulator projector. All of these devices exhibit several attractive features such as sub-millisecond response, relatively high spatial resolution and polarization-independence.

  19. Digital Beam Deflectors Based Partly on Liquid Crystals

    Science.gov (United States)

    Pouch, John J.; Miranda, Felix A.; Kreminska, Liubov; Pishnyak, Oleg; Golovin, Andrii; Winker, Bruce K.

    2007-01-01

    A digital beam deflector based partly on liquid crystals has been demonstrated as a prototype of a class of optical beam-steering devices that contain no mechanical actuators or solid moving parts. Such beam-steering devices could be useful in a variety of applications, including free-space optical communications, switching in fiber-optic communications, general optical switching, and optical scanning. Liquid crystals are of special interest as active materials in nonmechanical beam steerers and deflectors because of their structural flexibility, low operating voltages, and the relatively low costs of fabrication of devices that contain them.

  20. Layerless fabrication with continuous liquid interface production.

    Science.gov (United States)

    Janusziewicz, Rima; Tumbleston, John R; Quintanilla, Adam L; Mecham, Sue J; DeSimone, Joseph M

    2016-10-18

    Despite the increasing popularity of 3D printing, also known as additive manufacturing (AM), the technique has not developed beyond the realm of rapid prototyping. This confinement of the field can be attributed to the inherent flaws of layer-by-layer printing and, in particular, anisotropic mechanical properties that depend on print direction, visible by the staircasing surface finish effect. Continuous liquid interface production (CLIP) is an alternative approach to AM that capitalizes on the fundamental principle of oxygen-inhibited photopolymerization to generate a continual liquid interface of uncured resin between the growing part and the exposure window. This interface eliminates the necessity of an iterative layer-by-layer process, allowing for continuous production. Herein we report the advantages of continuous production, specifically the fabrication of layerless parts. These advantages enable the fabrication of large overhangs without the use of supports, reduction of the staircasing effect without compromising fabrication time, and isotropic mechanical properties. Combined, these advantages result in multiple indicators of layerless and monolithic fabrication using CLIP technology.

  1. Layerless fabrication with continuous liquid interface production

    Science.gov (United States)

    Janusziewicz, Rima; Tumbleston, John R.; Quintanilla, Adam L.; Mecham, Sue J.; DeSimone, Joseph M.

    2016-01-01

    Despite the increasing popularity of 3D printing, also known as additive manufacturing (AM), the technique has not developed beyond the realm of rapid prototyping. This confinement of the field can be attributed to the inherent flaws of layer-by-layer printing and, in particular, anisotropic mechanical properties that depend on print direction, visible by the staircasing surface finish effect. Continuous liquid interface production (CLIP) is an alternative approach to AM that capitalizes on the fundamental principle of oxygen-inhibited photopolymerization to generate a continual liquid interface of uncured resin between the growing part and the exposure window. This interface eliminates the necessity of an iterative layer-by-layer process, allowing for continuous production. Herein we report the advantages of continuous production, specifically the fabrication of layerless parts. These advantages enable the fabrication of large overhangs without the use of supports, reduction of the staircasing effect without compromising fabrication time, and isotropic mechanical properties. Combined, these advantages result in multiple indicators of layerless and monolithic fabrication using CLIP technology. PMID:27671641

  2. Demonstrations with a Liquid Crystal Shutter

    Science.gov (United States)

    Kraftmakher, Yaakov

    2012-01-01

    The experiments presented show the response of a liquid crystal shutter to applied electric voltages and the delay of the operations. Both properties are important for liquid crystal displays of computers and television sets. Two characteristics of the shutter are determined: (i) the optical transmittance versus applied voltage of various…

  3. Liquid Crystals in Education--The Basics

    Science.gov (United States)

    Cepic, Mojca

    2012-01-01

    The introduction of teaching about liquid crystals is discussed from several points of view: the rationale why to teach them, the basics about liquid crystals or what the teacher should teach about them, the fundamental pre-knowledge of students required, the set of experiments accompanying the teaching and the brief report on the already…

  4. Flowing liquid crystal simulating the Schwarzschild metric

    Energy Technology Data Exchange (ETDEWEB)

    Pereira, Erms R.; Moraes, Fernando [Universidade Federal da Paraiba (UFPB), Joao Pessoa, PB (Brazil)

    2009-07-01

    Full text. We show how to simulate the equatorial section of the Schwarzschild metric through a flowing liquid crystal in its nematic phase. Inside a liquid crystal in the nematic phase, a traveling light ray feels an effective metric, whose properties are linked to perpendicular and parallel refractive indexes, no e ne respectively, of the rod-like molecule of the liquid crystal. As these indexes depend on the scalar order parameter of the liquid crystal, the Beris-Edwards hydrodynamic theory is used to connect the order parameter with the velocity of a liquid crystal flow at each point. This way we calculate a radial velocity profile that simulates the equatorial section of the Schwarzschild metric in the nematic phase of the liquid crystal. This work will be presented in the following way. First, we show the effective metric that describes the light propagation around a (k = 1; c = 0) disclination defect of the nematic phase of a liquid crystalline sample and how this light propagation can be described by the order parameter q of the liquid crystalline material. Afterwards, we consider the liquid crystal flowing radially and we use the Beris-Edwards theory to analyze the dependence of the order parameter of the material with the flowing velocity module. In these two cases we consider the more general situation of three space dimensions. Finally, we employ the result from the second part in the first and we compare with the Schwarzschild metric written in isotropic coordinates. (author)

  5. Gold Liquid Crystals in the XXI Century

    Directory of Open Access Journals (Sweden)

    Manuel Bardají

    2014-08-01

    Full Text Available Since the first gold liquid crystal was described in 1986, much effort has been done to prepare new compounds bearing this property. The review deals with the last results obtained in this new century. Gold(I has a strong affinity to give linear co-ordination and metal-metal interactions, which produce a rich supramolecular chemistry, and can promote the behavior as liquid crystal. Therefore, most liquid crystals are based on rod-like gold(I compounds, while gold(III liquid crystals are scarce. Calamitic and discotic mesogens have been reported, as well as chiral liquid crystals. Weak interactions such as H-bonds have also been used to obtain gold mesogens. Some of them exhibit additional properties, such as color, luminescence, and chirality. Luminescence has been reported, not only in the solid state or in solution, but also in the mesophase. This is relevant for applications in LEDs (Light Emitting Diodes, information storage, and sensors.

  6. Liquid crystal device and method thereof

    Science.gov (United States)

    Shiyanovskii, Sergij V; Gu, Mingxia; Lavrentovich, Oleg D

    2012-10-23

    The invention provides a liquid crystal device and method thereof. Subsequent to applying a first electrical voltage on a liquid crystal to induce a reorientation of the liquid crystal, a second electrical voltage with proper polarity is applied on the liquid crystal to assist the relaxation of the reorientation that was induced by the first electrical voltage. The "switch-off" phase of the liquid crystal can therefore be accelerated or temporally shortened, and the device can exhibit better performance such as fast response to on/off signals. The invention can be widely used LCD, LC shutter, LC lens, spatial light modulator, telecommunication device, tunable filter, beam steering device, and electrically driven LC device, among others.

  7. Switchable random laser from dye-doped polymer dispersed liquid crystal waveguides

    NARCIS (Netherlands)

    Xiao, Shumin; Song, Qinghai; Wang, Feng; Liu, Liying; Liu, Jianhua; Xu, Lei

    2007-01-01

    A dye-doped polymer-dispersed liquid crystal (PDLC) film has been fabricated for random lasing action. In this PDLC film, the sizes of most liquid crystal (LC) droplets ranged from 200 to 500 nm. When the sample is optically pumped, ultrahigh Q (>10 000) lasing modes and a collimated laser beam can

  8. Fabrication of crystals from single metal atoms.

    Science.gov (United States)

    Barry, Nicolas P E; Pitto-Barry, Anaïs; Sanchez, Ana M; Dove, Andrew P; Procter, Richard J; Soldevila-Barreda, Joan J; Kirby, Nigel; Hands-Portman, Ian; Smith, Corinne J; O'Reilly, Rachel K; Beanland, Richard; Sadler, Peter J

    2014-05-27

    Metal nanocrystals offer new concepts for the design of nanodevices with a range of potential applications. Currently the formation of metal nanocrystals cannot be controlled at the level of individual atoms. Here we describe a new general method for the fabrication of multi-heteroatom-doped graphitic matrices decorated with very small, ångström-sized, three-dimensional (3D)-metal crystals of defined size. We irradiate boron-rich precious-metal-encapsulated self-spreading polymer micelles with electrons and produce, in real time, a doped graphitic support on which individual osmium atoms hop and migrate to form 3D-nanocrystals, as small as 15 Å in diameter, within 1 h. Crystal growth can be observed, quantified and controlled in real time. We also synthesize the first examples of mixed ruthenium-osmium 3D-nanocrystals. This technology not only allows the production of ångström-sized homo- and hetero-crystals, but also provides new experimental insight into the dynamics of nanocrystals and pathways for their assembly from single atoms.

  9. Crystallization of Polymers at liquid/liquid interface templated by single-walled carbon nanotubes

    Science.gov (United States)

    Wang, Wenda; Li, Christopher

    2012-02-01

    Nanosized single-walled carbon nanotube rings were fabricated by using a Pickering emulsion-based method. By tuning a water/oil/SWNT miniemulsion system, SWNT rings with a diameter of ˜200 nm can be readily achieved. The formation mechanism is attributed to the bending force induced by the curved liquid/liquid interface. Crystallization of polyethylene homo- and copolymers using this unique SWNT rings as the nucleation agent was conducted at the curved liquid/liquid interface. Crystal structure, hybrid morphology and crystallization kinetics were systematically studied. The structure of controlled alternating patterns on SWNT rings has great potential in various applications in large-scale integrated circuits and single-electron devices.

  10. Single-Grain Si TFTs Fabricated by Liquid-Si and Long-Pulse Excimer-Laser

    NARCIS (Netherlands)

    Ishihara, R.; Zhang, J.; Trifunovic, M.; Van der Zwan, M.; Takagishi, H.; Kawajiri, R.; Shimoda, T.; Beenakker, C.I.M.

    2012-01-01

    Solution process of silicon using liquid-Si is attractive for fabrication of high-speed flexible electronics. We have fabricated single-grain Si TFTs on location-controlled Si grains with longpulse excimer laser crystallization of spin-coated liquid Si film. The maximum grain diameter is 3.5μm, and

  11. Lyotropic Liquid Crystal Phases from Anisotropic Nanomaterials

    Directory of Open Access Journals (Sweden)

    Ingo Dierking

    2017-10-01

    Full Text Available Liquid crystals are an integral part of a mature display technology, also establishing themselves in other applications, such as spatial light modulators, telecommunication technology, photonics, or sensors, just to name a few of the non-display applications. In recent years, there has been an increasing trend to add various nanomaterials to liquid crystals, which is motivated by several aspects of materials development. (i addition of nanomaterials can change and thus tune the properties of the liquid crystal; (ii novel functionalities can be added to the liquid crystal; and (iii the self-organization of the liquid crystalline state can be exploited to template ordered structures or to transfer order onto dispersed nanomaterials. Much of the research effort has been concentrated on thermotropic systems, which change order as a function of temperature. Here we review the other side of the medal, the formation and properties of ordered, anisotropic fluid phases, liquid crystals, by addition of shape-anisotropic nanomaterials to isotropic liquids. Several classes of materials will be discussed, inorganic and mineral liquid crystals, viruses, nanotubes and nanorods, as well as graphene oxide.

  12. Nonlinear femtosecond pulse compression in cholesteric liquid crystals (Conference Presentation)

    Science.gov (United States)

    Liu, Yikun; Zhou, Jianying; Lin, Tsung-Hsien; Khoo, Iam-Choon

    2016-09-01

    Liquid crystals materials have the advantage of having a large nonlinear coefficient, but the response time is slow, normally up to several minisecond. This makes it is hard to apply in ultra fast optical devices. Recently, fentosecond (fs) nonlinear effect in choleteric liquid crystals is reported, nonlinear coefficient in the scale of 10-12 cm2/W is achieved. Base on this effect, in this work, fentosecond pulse compression technique in a miniature choleteric liquid crystal is demonstrated1,2. Cholesteric liquid crystals (CLC) is a kind of 1-dimensional phontonic structure with helical periodic. In a 10 μm thick CLC, femtosecond pulse with 100 fs is compressed to about 50 fs. CLC sample in planar texture with 500μm thick cell gap is further fabricated. In this sample, femtosecond pulse with 847 fs can be compressed to 286 fs. Due to the strong dispersion at the edge of photonic band gap, femtosecond pulse stretching and compensation can be achieve. In this experiment, laser pulse with duration 90 fs is stretched to above 2 picosecond in the first CLC sample and re-compressed to 120 fs in the second sample. Such technique might be applied in chirp pulse amplification. In conclusion, we report ultra fast nonlinear effect in cholesteric liquid crystals. Due to the strong dispersion and nonlinearity of CLC, femtosecond pulse manipulating devices can be achieved in the scale of micrometer.

  13. Electrically tunable Yb-doped fiber laser based on a liquid crystal photonic bandgap fiber device

    DEFF Research Database (Denmark)

    Olausson, Christina Bjarnal Thulin; Scolari, Lara; Wei, Lei

    2010-01-01

    We demonstrate electrical tunability of a fiber laser using a liquid crystal photonic bandgap fiber. Tuning of the laser is achieved by combining the wavelength filtering effect of a tunable liquid crystal photonic bandgap fiber device with an ytterbium-doped photonic crystal fiber. We fabricate...... an all-spliced laser cavity based on the liquid crystal photonic bandgap fiber mounted on a silicon assembly, a pump/signal combiner with single-mode signal feed-through and an ytterbium-doped photonic crystal fiber. The laser cavity produces a single-mode output and is tuned in the range 1040-1065 nm...

  14. NMR spectroscopy using liquid crystal solvents

    CERN Document Server

    Emsley, JW

    2013-01-01

    NMR Spectroscopy using Liquid Crystal Solvents covers the importance of using a liquid crystal solvent in NMR to derive nuclear dipolar spin-spin coupling constants. This book is composed of ten chapters, and begins with a brief description of the features and benefits of liquid crystal in NMR spectroscopic analysis. The succeeding chapters deal with the mode of operation of nuclear spin Hamiltonian for partially oriented molecules and the analysis of NMR spectra of partially oriented molecules, as well as the determination of rigid molecule structure. These topics are followed by discussions

  15. Liquid Crystal Research Shows Deformation By Drying

    Science.gov (United States)

    2003-01-01

    These images, from David Weitz's liquid crystal research, show ordered uniform sized droplets (upper left) before they are dried from their solution. After the droplets are dried (upper right), they are viewed with crossed polarizers that show the deformation caused by drying, a process that orients the bipolar structure of the liquid crystal within the droplets. When an electric field is applied to the dried droplets (lower left), and then increased (lower right), the liquid crystal within the droplets switches its alignment, thereby reducing the amount of light that can be scattered by the droplets when a beam is shone through them.

  16. STATIC AND DYNAMIC THEORIES OF LIQUID CRYSTALS

    Institute of Scientific and Technical Information of China (English)

    林芳华; 刘春

    2001-01-01

    The study of liquid crystals givesrise to many fascinating but difficult mathematical problems. The purpose of this paper is to briefly summarize some recent advances, as well as to describe the present state of art of the theory of liquid crystals.For the static theory, we emphasis on the theory of defects and the theory of Smectic A materials. We will also study the Ericksen-Leslie theory for the liquid crystal flow.The well-posedness as well as the motion of the defects will be discussed.

  17. Computer simulation of liquid crystals

    Energy Technology Data Exchange (ETDEWEB)

    McBride, C.

    1999-01-01

    Molecular dynamics simulation performed on modern computer workstations provides a powerful tool for the investigation of the static and dynamic characteristics of liquid crystal phases. In this thesis molecular dynamics computer simulations have been performed for two model systems. Simulations of 4,4'-di-n-pentyl-bibicyclo[2.2.2]octane demonstrate the growth of a structurally ordered phase directly from an isotropic fluid. This is the first time that this has been achieved for an atomistic model. The results demonstrate a strong coupling between orientational ordering and molecular shape, but indicate that the coupling between molecular conformational changes and molecular reorientation is relatively weak. Simulations have also been performed for a hybrid Gay-Berne/Lennard-Jones model resulting in thermodynamically stable nematic and smectic phases. Frank elastic constants have been calculated for the nematic phase formed by the hybrid model through analysis of the fluctuations of the nematic director, giving results comparable with those found experimentally. Work presented in this thesis also describes the parameterization of the torsional potential of a fragment of a dimethyl siloxane polymer chain, disiloxane diol (HOMe[sub 2]Si)[sub 2]O, using ab initio quantum mechanical calculations. (author)

  18. Computer simulation of liquid crystals

    Energy Technology Data Exchange (ETDEWEB)

    McBride, C

    1999-09-01

    Molecular dynamics simulation performed on modern computer workstations provides a powerful tool for the investigation of the static and dynamic characteristics of liquid crystal phases. In this thesis molecular dynamics computer simulations have been performed for two model systems. Simulations of 4,4`-di-n-pentyl-bibicyclo[2.2.2]octane demonstrate the growth of a structurally ordered phase directly from an isotropic fluid. This is the first time that this has been achieved for an atomistic model. The results demonstrate a strong coupling between orientational ordering and molecular shape, but indicate that the coupling between molecular conformational changes and molecular reorientation is relatively weak. Simulations have also been performed for a hybrid Gay-Berne/Lennard-Jones model resulting in thermodynamically stable nematic and smectic phases. Frank elastic constants have been calculated for the nematic phase formed by the hybrid model through analysis of the fluctuations of the nematic director, giving results comparable with those found experimentally. Work presented in this thesis also describes the parameterization of the torsional potential of a fragment of a dimethyl siloxane polymer chain, disiloxane diol (HOMe{sub 2}Si){sub 2}O, using ab initio quantum mechanical calculations. (author)

  19. Nanoparticles in discotic liquid crystals

    Science.gov (United States)

    Kumar, Sandeep

    The self-assembly of disc-shaped molecules creates discotic liquid crystals (DLCs). These nanomaterials of the sizes ranging from 2-6 nm are emerging as a new class of organic semiconducting materials. The unique geometry of columnar mesophases formed by discotic molecules is of great importance to study the one-dimensional charge and energy migration in organized systems. A number of applications of DLCs, such as, one-dimensional conductor, photoconductor, photovoltaic solar cells, light emitting diodes and gas sensors have been reported. The conductivity along the columns in columnar mesophases has been observed to be several orders of magnitude greater than in perpendicular direction and, therefore, DLCs are described as molecular wires. On the other hand, the fields of nanostructured materials, such as gold nanoparticles, quantum dots, carbon nanotubes and graphene, have received tremendous development in the past decade due to their technological and fundamental interest. Recently the hybridization of DLCs with various metallic and semiconducting nanoparticles has been realized to alter and improve their properties. These nanocomposites are not only of basic science interest but also lead to novel materials for many device applications. This article provides an overview on the development in the field of newly immersed discotic nanoscience. After a brief introduction of DLCs, the article will cover the inclusion of various zero-, one- and two-dimensional nanoparticles in DLCs. Finally, an outlook into the future of this newly emerging intriguing field of discotic nanoscience research will be provided.

  20. Optical Study of Liquid Crystal Lens Doped with Multiwalled Carbon Nanotubes

    Directory of Open Access Journals (Sweden)

    Hui LI

    2016-05-01

    Full Text Available In this paper, a new kind of electrically controlled liquid crystal lens, which respond in a relatively fast time, is presented. The multiwalled carbon nanotubes are doped into liquid crystal to fabricate the liquid crystal lens. As 0.02 % concentration of multiwalled carbon nanotubes is uniformly distributed in the liquid crystal, the optical features of the liquid crystal lens are obviously improved. The liquid crystal lens with a diameter of 2.0 mm was fabricated with about 0.2 s response time and less than 5 Vrms applied voltage. The focal length can vary from 16 to 510 mm, and the operation voltage changes from 1.0 to 5.5 Vrms. This liquid crystal lens has the very attractive feature of submillisecond response time, which is a much faster response time in comparison with conventional liquid crystal lens. Thus, this kind of liquid crystal lens has high potential for implementation in many practical imaging applications and imaging commercialisation.DOI: http://dx.doi.org/10.5755/j01.ms.22.2.12911

  1. Liquid crystal on subwavelength metal gratings

    Energy Technology Data Exchange (ETDEWEB)

    Palto, S. P.; Barnik, M. I.; Artemov, V. V.; Shtykov, N. M.; Geivandov, A. R.; Yudin, S. G.; Gorkunov, M. V. [Shubnikov Institute of Crystallography of Russian Academy of Sciences, Leninsky pr. 59, 119333 Moscow (Russian Federation)

    2015-06-14

    Optical and electrooptical properties of a system consisting of subwavelength metal gratings and nematic liquid crystal layer are studied. Aluminium gratings that also act as interdigitated electrodes are produced by focused ion beam lithography. It is found that a liquid crystal layer strongly influences both the resonance and light polarization properties characteristic of the gratings. Enhanced transmittance is observed not only for the TM-polarized light in the near infrared spectral range but also for the TE-polarized light in the visible range. Although the electrodes are separated by nanosized slits, and the electric field is strongly localized near the surface, a pronounced electrooptical effect is registered. The effect is explained in terms of local reorientation of liquid crystal molecules at the grating surface and propagation of the orientational deformation from the surface into the bulk of the liquid crystal layer.

  2. Structure and Properties of Liquid Crystals

    CERN Document Server

    Blinov, Lev M

    2011-01-01

    This book by Lev M. Blinov is ideal to guide researchers from their very first encounter with liquid crystals to the level where they can perform independent experiments on liquid crystals with a thorough understanding of their behaviour also in relation to the theoretical framework. Liquid crystals can be found everywhere around us. They are used in virtually every display device, whether it is for domestic appliances of for specialized technological instruments. Their finely tunable optical properties make them suitable also for thermo-sensing and laser technologies. There are many monographs written by prominent scholars on the subject of liquid crystals. The majority of them presents the subject in great depth, sometimes focusing on a particular research aspect, and in general they require a significant level of prior knowledge. In contrast, this books aims at an audience of advanced undergraduate and graduate students in physics, chemistry and materials science. The book consists of three parts: the firs...

  3. Thermal Conductivity and Liquid Crystal Thermometers.

    Science.gov (United States)

    Edge, R. D., Ed.

    1993-01-01

    Describes using stock liquid crystal postcards as inexpensive classroom thermometers. Also suggests using these postcards as a good visual temperature indicator for classroom demonstrations such as temperature gradients. One such activity is provided. (MVL)

  4. Liquid crystal interfaces: Experiments, simulations and biosensors

    Science.gov (United States)

    Popov, Piotr

    Interfacial phenomena are ubiquitous and extremely important in various aspects of biological and industrial processes. For example, many liquid crystal applications start by alignment with a surface. The underlying mechanisms of the molecular organization of liquid crystals at an interface are still under intensive study and continue to be important to the display industry in order to develop better and/or new display technology. My dissertation research has been devoted to studying how complex liquid crystals can be guided to organize at an interface, and to using my findings to develop practical applications. Specifically, I have been working on developing biosensors using liquid-crystal/surfactant/lipid/protein interactions as well as the alignment of low-symmetry liquid crystals for potential new display and optomechanical applications. The biotechnology industry needs better ways of sensing biomaterials and identifying various nanoscale events at biological interfaces and in aqueous solutions. Sensors in which the recognition material is a liquid crystal naturally connects the existing knowledge and experience of the display and biotechnology industries together with surface and soft matter sciences. This dissertation thus mainly focuses on the delicate phenomena that happen at liquid interfaces. In the introduction, I start by defining the interface and discuss its structure and the relevant interfacial forces. I then introduce the general characteristics of biosensors and, in particular, describe the design of biosensors that employ liquid crystal/aqueous solution interfaces. I further describe the basic properties of liquid crystal materials that are relevant for liquid crystal-based biosensing applications. In CHAPTER 2, I describe the simulation methods and experimental techniques used in this dissertation. In CHAPTER 3 and CHAPTER 4, I present my computer simulation work. CHAPTER 3 presents insight of how liquid crystal molecules are aligned by

  5. Thermotropic Liquid Crystals with Nitrocinnamylidene Unit

    Science.gov (United States)

    1988-10-14

    Introduction Low molar mass liquid crystals of schiff base (-CH=N-) type have been long time recognized and studied 1 . However, liquid crystals...containing conjugated Schiff base (-(CH--CH)n-CH=N-) are still not explored extensively. Back in 1929, D. Vorlander first introduced molecules of conjugated... Schiff base (-(CH=CF.)n-CH=N, n= 1 and 2) type2 , which were synthesized by reacting either 5-phenyl-l-pentadiene or 7-phenyl-l-heptatriene with

  6. Topological Defects in Liquid Crystal Films

    Institute of Scientific and Technical Information of China (English)

    DUAN Yi-Shi; ZHAO Li; ZHANG Xin-Hui; SI Tie-Yan

    2007-01-01

    A topological theory of liquid crystal films in the presence of defects is developed based on the φ-mapping topological current theory. By generalizing the free-energy density in "one-constant" approximation, a covariant freeenergy density is obtained, from which the U(1) gauge field and the unified topological current for monopoles and strings in liquid crystals are derived. The inner topological structure of these topological defects is characterized by the winding numbers of φ-mapping.

  7. Vacuum pyrolysis characteristics and kinetic analysis of liquid crystal from scrap liquid crystal display panels.

    Science.gov (United States)

    Chen, Ya; Zhang, Lingen; Xu, Zhenming

    2017-04-05

    Recycling of waste liquid crystal display (LCD) panels is an urgent task with the rapid expanding LCD market. However, as important composition of LCD panels, the treatment of liquid crystal is seldom concerned for its low concentration. In present study, a stripping product enriched liquid crystal and indium is gained by mechanical stripping process, in which liquid crystal is enriched from 0.3wt.% to 53wt.% and indium is enriched from 0.02wt.% to 7.95wt.%. For the stripping product, liquid crystal should be removed before indium recovery because (a) liquid crystal will hinder indium recycling; (b) liquid crystal is hazardous waste. Hence, an effective and green approach by vacuum pyrolysis is proposed to treat liquid crystal in the stripping product. The results are summarized as: (i) From the perspective of apparent activation energy, the advantages of vacuum pyrolysis is expounded according to kinetic analysis. (ii) 89.10wt.% of liquid crystal is converted and the content of indium in residue reaches 14.18wt.% under 773K, 15min and system pressure of 20Pa. This study provides reliable information for further industrial application and an essential pretreatment for the next step of indium recycling.

  8. Semiconductor liquid crystal composition and methods for making the same

    Science.gov (United States)

    Alivisatos, A. Paul; Li, Liang-shi

    2005-04-26

    Semiconductor liquid crystal compositions and methods for making such compositions are disclosed. One embodiment of the invention is directed to a liquid crystal composition including a solvent and semiconductor particles in the solvent. The solvent and the semiconductor particles are in an effective amount in the liquid crystal composition to form a liquid crystal phase.

  9. Electro-osmosis in nematic liquid crystals

    Science.gov (United States)

    Tovkach, O. M.; Calderer, M. Carme; Golovaty, Dmitry; Lavrentovich, Oleg; Walkington, Noel J.

    2016-07-01

    We derive a mathematical model of a nematic electrolyte based on a variational formulation of nematodynamics. We verify the model by comparing its predictions to the results of the experiments on the substrate-controlled liquid-crystal-enabled electrokinetics. In the experiments, a nematic liquid crystal confined to a thin planar cell with surface-patterned anchoring conditions exhibits electro-osmotic flows along the "guiding rails" imposed by the spatially varying director. Extending our previous work, we consider a general setup which incorporates dielectric anisotropy of the liquid-crystalline matrix and the full set of nematic viscosities.

  10. Latest Developments In Liquid Crystal Television Displays

    Science.gov (United States)

    Morozumi, Shinji; Oguchi, Kouichi; Ohshima, Hiroyuki

    1984-06-01

    This paper will discuss developments in liquid crystal (LC) television displays, mainly for pocket-size TV sets. There are two types of LC television displays. One is a simple multiplexing type, and the other is an active matrix type. The former type is an easier way to fabricate large and low-cost LC panels than the latter. However, it has serious drawbacks. The contrast gets lower as the duty ratio gets higher. Therefore the TV image of this type inevitably has rather low contrast and resolution. On the other hand, the active matrix type, which consists of active elements in each pixel, has several advantages in overcoming such problems. The metal oxide semiconductor transistors and the amorphous or polycrystalline Si thin-film transistors (TFTs) have possibilities in this application. A full-color LC display, which can be realized by the combina-tion of color filters and poly Si TFT arrays on a transparent substrate, was proven to have excellent color image, close to that of conventional CRTs. Here, several examples of LC television displays, including color, are shown. Some of them are already on the market, and others will be soon.

  11. Infrared shutter using cholesteric liquid crystal.

    Science.gov (United States)

    Choi, Gyu Jin; Jung, Hye Min; Lee, Seung Hee; Gwag, Jin Seog

    2016-06-01

    In this paper, we propose an infrared light shutter device using cholesteric liquid crystals. The pitch of the device corresponds to the wavelengths of the infrared region with a strong thermal effect. This device is intended for use as a smart window to maintain an optimal indoor temperature by controlling the infrared radiation coming from the sun. The proposed cholesteric device switches between the planar state and the isotropic state by controlling the temperature using an electrically heated transparent electrode made of indium tin oxide. A window with a planar state that reflects infrared radiation would be used mainly in the summer, while the isotropic state that transmits infrared would be applied in the winter. The proposed device produced a variety of gray levels of transmittance based on the temperature, and thus it can provide the proper temperature for each user. The easy fabrication process gives it appeal as a functional device in the smart window market, and it compares favorably with previous light shutter devices. The infrared shutter is expected to be useful for next-generation window applications.

  12. Photocontrol of fluid slugs in liquid crystal polymer microactuators

    Science.gov (United States)

    Lv, Jiu-An; Liu, Yuyun; Wei, Jia; Chen, Erqiang; Qin, Lang; Yu, Yanlei

    2016-09-01

    The manipulation of small amounts of liquids has applications ranging from biomedical devices to liquid transfer. Direct light-driven manipulation of liquids, especially when triggered by light-induced capillary forces, is of particular interest because light can provide contactless spatial and temporal control. However, existing light-driven technologies suffer from an inherent limitation in that liquid motion is strongly resisted by the effect of contact-line pinning. Here we report a strategy to manipulate fluid slugs by photo-induced asymmetric deformation of tubular microactuators, which induces capillary forces for liquid propulsion. Microactuators with various shapes (straight, ‘Y’-shaped, serpentine and helical) are fabricated from a mechanically robust linear liquid crystal polymer. These microactuators are able to exert photocontrol of a wide diversity of liquids over a long distance with controllable velocity and direction, and hence to mix multiphase liquids, to combine liquids and even to make liquids run uphill. We anticipate that this photodeformable microactuator will find use in micro-reactors, in laboratory-on-a-chip settings and in micro-optomechanical systems.

  13. Tetrahedral Order in Liquid Crystals

    Science.gov (United States)

    Pleiner, Harald; Brand, Helmut R.

    2016-10-01

    We review the impact of tetrahedral order on the macroscopic dynamics of bent-core liquid crystals. We discuss tetrahedral order comparing with other types of orientational order, like nematic, polar nematic, polar smectic, and active polar order. In particular, we present hydrodynamic equations for phases, where only tetrahedral order exists or tetrahedral order is combined with nematic order. Among the latter, we discriminate between three cases, where the nematic director (a) orients along a fourfold, (b) along a threefold symmetry axis of the tetrahedral structure, or (c) is homogeneously uncorrelated with the tetrahedron. For the optically isotropic T d phase, which only has tetrahedral order, we focus on the coupling of flow with, e.g., temperature gradients and on the specific orientation behavior in external electric fields. For the transition to the nematic phase, electric fields lead to a temperature shift that is linear in the field strength. Electric fields induce nematic order, again linear in the field strength. If strong enough, electric fields can change the tetrahedral structure and symmetry leading to a polar phase. We briefly deal with the T phase that arises when tetrahedral order occurs in a system of chiral molecules. To case (a), defined above, belong (i) the non-polar, achiral, optically uniaxial D2d phase with ambidextrous helicity (due to a linear gradient free energy contribution) and with orientational frustration in external fields, (ii) the non-polar tetragonal S4 phase, (iii) the non-polar, orthorhombic D2 phase that is structurally chiral featuring ambidextrous chirality, (iv) the polar orthorhombic C2v phase, and (v) the polar, structurally chiral, monoclinic C2 phase. Case (b) results in a trigonal C3v phase that behaves like a biaxial polar nematic phase. An example for case (c) is a splay bend phase, where the ground state is inhomogeneous due to a linear gradient free energy contribution. Finally, we discuss some experiments

  14. Three-dimensional vector recording in polarization sensitive liquid crystal composites by using axisymmetrically polarized beam.

    Science.gov (United States)

    Sakamoto, Moritsugu; Sasaki, Tomoyuki; Noda, Kohei; Tien, Tran Minh; Kawatsuki, Nobuhiro; Ono, Hiroshi

    2016-02-01

    Three-dimensional anisotropic structures were fabricated by a recording axisymmetrically polarized beam in azobenzene (azo)-dye doped liquid crystal polymer composites. Polarization and wavefront modulation properties of fabricated anisotropic structures are investigated by experimentally and theoretically analyzing the diffraction properties. Photo-induced anisotropic structures would be utilized to generate singular light waves, such as optical and polarization vortices.

  15. Fabrication of High Quality Three-Dimensional Photonic Crystals

    Institute of Scientific and Technical Information of China (English)

    HU Xiao-Yong; LIU Yuan-Hao; CHENG Bing-Ying; ZHANG Dao-Zhong; MENG Qing-Bo

    2004-01-01

    High quality colloidal photonic crystals made from polystyrene spheres with diameter 240nm are fabricated by the vertical deposition method. The scanning electron microscopy (SEM) and the transmittance spectrum are used to characterize the properties of the photonic crystal. The SEM images show that there are few lattice defects. The transmittance of the photonic crystal is above 75% in the pass band at 700nm and is lower than 5% at the centre of the band gap, respectively. It is found that proper concentration is a very important factor to fabricate the photonic crystal when the diameter of the spheres is lower than 300nm.

  16. Electrically switchable Fresnel lenses in polymer-stabilized ferroelectric liquid crystals

    Science.gov (United States)

    Yeh, Hui-Chen; Ke, Ming-Wei; Liu, Yu-Mei

    2017-01-01

    In this study, we demonstrate the fabrication of an electrically switchable Fresnel lens based on surface-stabilized ferroelectric liquid crystals (SSFLCs) with polymer networks. The Fresnel lens was fabricated by injecting a monomer-doped ferroelectric liquid crystal into an extremely thin cell and exposing the cell to ultraviolet light through a Fresnel-zone-plate mask. The fabricated Fresnel lens consisted of the SSFLC and polymer-stabilized SSFLC structures. The focusing effect can be switched on by applying an appropriate voltage, and the characteristics of FLCs enable a rapid response on the order of milliseconds.

  17. Microfluidic Flow of Cholesteric Liquid Crystals

    CERN Document Server

    Wiese, Oliver; Henrich, Oliver

    2016-01-01

    We explore the rheology and flow-induced morphological changes of cholesteric liquid crystal patterns subject to Poiseuille flow within a slab geometry, and under different anchoring conditions at the wall. Our focus is particularly on the behaviour of Cholesteric Fingers of the first kind and of Blue Phase II. Depending on the applied pressure gradient, we observe a number of dynamic regimes with different rheological properties. Our results provide the first insight into the flow response of cholesteric phases with fully two- or three-dimensional director field patterns and normal and planar degenerate anchoring conditions as commonly realised in experiments. They are also of high relevance for a fundamental understanding of complex liquid crystals in confinement and an important step towards future microfluidic applications that are based on cholesteric liquid crystals.

  18. Characterising laser beams with liquid crystal displays

    Science.gov (United States)

    Dudley, Angela; Naidoo, Darryl; Forbes, Andrew

    2016-02-01

    We show how one can determine the various properties of light, from the modal content of laser beams to decoding the information stored in optical fields carrying orbital angular momentum, by performing a modal decomposition. Although the modal decomposition of light has been known for a long time, applied mostly to pattern recognition, we illustrate how this technique can be implemented with the use of liquid-crystal displays. We show experimentally how liquid crystal displays can be used to infer the intensity, phase, wavefront, Poynting vector, and orbital angular momentum density of unknown optical fields. This measurement technique makes use of a single spatial light modulator (liquid crystal display), a Fourier transforming lens and detector (CCD or photo-diode). Such a diagnostic tool is extremely relevant to the real-time analysis of solid-state and fibre laser systems as well as mode division multiplexing as an emerging technology in optical communication.

  19. Microfluidic flow of cholesteric liquid crystals.

    Science.gov (United States)

    Wiese, Oliver; Marenduzzo, Davide; Henrich, Oliver

    2016-11-16

    We explore the rheology and flow-induced morphological changes of cholesteric liquid crystal patterns subject to Poiseuille flow within a slab geometry, and under different anchoring conditions at the wall. Our focus is particularly on the behaviour of "Cholesteric Fingers of the first kind" and of Blue Phase II. Depending on the applied pressure gradient, we observe a number of dynamic regimes with different rheological properties. Our results provide the first insight into the flow response of cholesteric phases with fully two- or three-dimensional director field patterns and normal and planar degenerate anchoring conditions as commonly realised in experiments. They are also of high relevance for a fundamental understanding of complex liquid crystals in confinement and an important step towards future microfluidic applications that are based on cholesteric liquid crystals.

  20. Viscoelastic modes in chiral liquid crystals

    Indian Academy of Sciences (India)

    K A Suresh

    2003-08-01

    Viscoelastic properties of liquid crystals are very important for applications like display technology. However, there are not many direct techniques to study them. In this review, we describe our studies on the viscoelastic modes of some chiral liquid crystals using dynamic light scattering. We discuss viscoelastic modes corresponding to the C director fluctuations in the chiral smectic C phase and the behaviour of the Goldstone-mode near the chiral smectic C–smectic A phase transition. In cholesteric liquid crystals, we consider the director fluctuations in a wavevector range comparable to the inverse pitch of the cholesteric. Here, the study of the scattered light in the vicinity of the Bragg reflection using a novel geometry will be presented.

  1. Photonics and lasing in liquid crystals

    Directory of Open Access Journals (Sweden)

    Alison D. Ford

    2006-07-01

    Full Text Available Lasers were invented some 40 years ago and are now used in a plethora of applications. Stable liquid crystals were discovered at about the same time, and are now the basis of a large display industry. Both technologies involve photonics, the former in the creation and use of light and the latter in the control and manipulation of light. However, it is only recently that these two mature technologies have been combined to form liquid-crystal lasers, heralding a new era for these photonic materials and the potential for novel applications. We summarize the characteristics of liquid crystals that lead to laser devices, the wide diversity of possible laser systems, and the properties of the light produced.

  2. Liquid crystal parameter analysis for tunable photonic bandgap fiber devices

    DEFF Research Database (Denmark)

    Weirich, Johannes; Lægsgaard, Jesper; Wei, Lei;

    2010-01-01

    We investigate the tunability of splay-aligned liquid crystals for the use in solid core photonic crystal fibers. Finite element simulations are used to obtain the alignment of the liquid crystals subject to an external electric field. By means of the liquid crystal director field the optical per...

  3. Design and Fabrication of Photonic Crystal Materials and Components

    DEFF Research Database (Denmark)

    Harpøth, Anders

    2005-01-01

    in the deposited silicon films and to open for a potential use with photonic crystals. In relation to photonic crystal structures, different properties have been investigated by using modelling tools such as the plane wave expansion method and the Finite-Difference Time-Domain method. Furthermore different......The work described in this thesis covers the issues of producing materials for use as base material for fabricating photonic crystals and the design, fabrication and characterization of photonic crystal components. One of the aims is to investigate the possibilities of fabricating a silicon...... is in principle rather straightforward and benefits from being much cheaper compared to acquiring commercially available SOI substrates. Different issues as deposition temperature, surface roughness, crystallization, and silicon waveguide geometries have been investigated in order to reduce the optical loss...

  4. Liquid crystal alignment on ZnO nanostructure films

    Science.gov (United States)

    Chung, Yueh-Feng; Chen, Mu-Zhe; Yang, Sheng-Hsiung; Jeng, Shie-Chang

    2016-03-01

    The study of liquid crystal (LC) alignment is important for fundamental researches and industrial applications. The tunable pretilt angles of liquid crystal (LC) molecules aligned on the inorganic zinc oxide (ZnO) nanostructure films with controllable surface wettability are demonstrated in this work. The ZnO nanostructure films are deposited on the ITO- glass substrates by the two-steps hydrothermal process, and their wettability can be modified by annealing. Our experimental results show that the pretilt angles of LCs on ZnO nanostructure films can be successfully adjusted over a wide range from ~90° to ~0° as the surface energy on the ZnO nanostructure films changes from ~30 to ~70 mJ/m. Finally we have applied this technique to fabricate a no-bias optically-compensated bend (OCB) LCD with ZnO nanostructure films annealed at 235 °C.

  5. Tunable Photonic Band Gaps In Photonic Crystal Fibers Filled With a Cholesteric Liquid Crystal

    Institute of Scientific and Technical Information of China (English)

    Thomas; Tanggaard; Larsen; David; Sparre; Hermann; Anders; Bjarklev

    2003-01-01

    A photonic crystal fiber has been filled with a cholesteric liquid crystal. A temperature sensitive photonic band gap effect was observed, which was especially pronounced around the liquid crystal phase transition temperature.

  6. Ultrabroadband terahertz spectroscopy of a liquid crystal

    DEFF Research Database (Denmark)

    Vieweg, N.; Fischer, B. M.; Reuter, M.;

    2012-01-01

    present the frequency dependent index of refraction and the absorption coefficients of the nematic liquid crystal 5CB over a frequency range from 0.3 THz to 15 THz using a dispersion-free THz time-domain spectrometer system based on two-color plasma generation and air biased coherent detection (ABCD). We......Liquid crystals (LCs) are becoming increasingly important for applications in the terahertz frequency range. A detailed understanding of the spectroscopic parameters of these materials over a broad frequency range is crucial in order to design customized LC mixtures for improved performance. We...

  7. Chiral Liquid Crystals: Structures, Phases, Effects

    Directory of Open Access Journals (Sweden)

    Ingo Dierking

    2014-06-01

    Full Text Available The introduction of chirality, i.e., the lack of mirror symmetry, has a profound effect on liquid crystals, not only on the molecular scale but also on the supermolecular scale and phase. I review these effects, which are related to the formation of supermolecular helicity, the occurrence of novel thermodynamic phases, as well as electro-optic effects which can only be observed in chiral liquid crystalline materials. In particular, I will discuss the formation of helical superstructures in cholesteric, Twist Grain Boundary and ferroelectric phases. As examples for the occurrence of novel phases the Blue Phases and Twist Grain Boundary phases are introduced. Chirality related effects are demonstrated through the occurrence of ferroelectricity in both thermotropic as well as lyotropic liquid crystals. Lack of mirror symmetry is also discussed briefly for some biopolymers such as cellulose and DNA, together with its influence on liquid crystalline behavior.

  8. Angular velocity response of nanoparticles dispersed in liquid crystal

    Science.gov (United States)

    Huang, Pin-Chun; Shih, Wen-Pin

    2013-06-01

    A hybrid material of nanoparticles dispersed in liquid crystal changed capacitance after spinning beyond threshold angular velocity. Once the centrifugal force of nanoparticles overcomes the attractive force between liquid crystals, the nanoparticles begin to move. The order of highly viscous liquid crystals is disturbed by the nanoparticles' penetrative movement, and the dielectric constant of the liquid crystal cell changes as a result. We found that the angular velocity response of nanoparticles dispersed in liquid crystal with higher working temperature and nanoparticles' density provided higher sensitivity. The obtained results are important for the continuous improvement of liquid-crystal-based inertial sensors or nano-viscometers.

  9. 2D InP photonic crystal fabrication process development

    NARCIS (Netherlands)

    Rong, B.; Van der Drift, E.; Van der Heijden, R.W.; Salemink, H.W.M.

    2006-01-01

    We have developed a reliable process to fabricate high quality 2D air-hole and dielectric column InP photonic crystals with a high aspect ratio on a STS production tool using ICP N2+Cl2 plasma. The photonic crystals have a triangular lattice with lattice constant of 400 nm and air-hole and dielectri

  10. Rapid Fabrication of Three-Dimensional Woodpile Photonic Crystals by Means of Two-Photon Photopolymerization

    Institute of Scientific and Technical Information of China (English)

    ZHOU Ming; KONG Jun-Jie; YANG Hai-Feng; YAN Feng; CAI Lan

    2007-01-01

    Two-photon photopolymerization (TPP) of femtosecond laser is a promising method to fabricate three-dimensional woodpile photonic crystals (PCs). We build micro-fabrication system based on the principle of TPP. Three-dimensional woodpile PCs consisting of in-plane rod distances ranging from 1000 nm to 2000 nm are fabricated by focusing femtosecond laser in photosensitive liquid resin ORMOCER. The properties of the PCs are also discussed, and fundamental photonic band gaps in middle-infrared range are measured, whose in-plane rod distances are 1500 nm and 2000 nm. Three-dimensional woodpile PC devices with desired defects, such as cross-waveguide and micro-laser structures, are introduced easily by TPP. We fabricate the three-dimensional woodpile PCs in the liquid resin at the fast scanning speed of 120 fxm/s.

  11. Method of fabricating patterned crystal structures

    KAUST Repository

    Yu, Liyang

    2016-12-15

    A method of manufacturing a patterned crystal structure for includes depositing an amorphous material. The amorphous material is modified such that a first portion of the amorphous thin-film layer has a first height/volume and a second portion of the amorphous thin-film layer has a second height/volume greater than the first portion. The amorphous material is annealed to induce crystallization, wherein crystallization is induced in the second portion first due to the greater height/volume of the second portion relative to the first portion to form patterned crystal structures.

  12. Electrically switchable holographic liquid crystal/polymer Fresnel lens using a Michelson interferometer.

    Science.gov (United States)

    Jashnsaz, Hossein; Mohajerani, Ezeddin; Nemati, Hossein; Razavi, Seyed Hossein; Alidokht, Isa Ahmad

    2011-06-10

    A holographic technique for fabricating an electrically switchable liquid crystal/polymer composite Fresnel lens is reported. A Michelson interferometer is used to produce the required Fresnel pattern, by placing a convex lens into one path of the interferometer. Simplicity of the method and the possibility of fabricating different focal length lenses in a single arrangement are advantages of the method. The performance of the fabricated lens was demonstrated and its electro-optical properties were investigated for its primary focal length.

  13. Liquid crystal wavefront corrector on silicon

    NARCIS (Netherlands)

    Loktev, M.; Vdovin, G.; Nanver, L.

    2005-01-01

    A reflective-type liquid crystal (LC) wavefront corrector with modal addressing is described. The corrector’s backplane has an array of pixel electrodes interconnected by a network of discrete resistors. The resistive network serves to form the local voltage profile that controls the phase distribut

  14. Supramolecular liquid crystal displays : construction and applications

    NARCIS (Netherlands)

    Hoogboom, Joannes Theodorus Valentinus

    2004-01-01

    This thesis describes chemical methodologies, which can be ued to construct alignment layers for liquid crystal display purposes in a non-clean room environment, by making use of supramolecular chemistry. These techniques are subsequently used to attain control over LCD-properties, both pre- and pos

  15. Hydrodynamic correlation functions in nematic liquid crystals

    NARCIS (Netherlands)

    Lekkerkerker, H.N.W.; Carle, D.; Laidlaw, W.G.

    1976-01-01

    The result, recently discovered by Forster, that the strength factors of the nonpropagating modes in certain hydrodynamic correlation functions in nematic liquid crystals are not fully determined by the hydrodynamic matrix is reconsidered. Using time reversal and space inversion symmetry one finds t

  16. Discotic liquid crystals: from dynamics to conductivity

    NARCIS (Netherlands)

    Kruglova, O.V.

    2007-01-01

    The dynamics and conductivity of the discotic liquid-crystal, hexakis(n-hexylox) triphenylene (HAT6), and charge-transfer complex that it forms with 2,4,7trinitro-9-fluorenone (TNF) are studied using quasielastic neutron-scattering (QENS) and Pulse-Radiolysis Time resolved Conductivity. These two te

  17. Goethite liquid crystals and magnetic field effects

    NARCIS (Netherlands)

    van den Pol, E

    2010-01-01

    In this thesis the liquid crystal phase behavior of colloidal, boardlike, goethite (alpha-FeOOH) particles is described. Apart from the nematic phase, a smectic A phase is formed in systems with a low and high polydispersity. Strong fractionation occurs which is able to reduce the local length polyd

  18. Hydrodynamic correlation functions in nematic liquid crystals

    NARCIS (Netherlands)

    Lekkerkerker, H.N.W.; Carle, D.; Laidlaw, W.G.

    1976-01-01

    The result, recently discovered by Forster, that the strength factors of the nonpropagating modes in certain hydrodynamic correlation functions in nematic liquid crystals are not fully determined by the hydrodynamic matrix is reconsidered. Using time reversal and space inversion symmetry one finds t

  19. Fluctuation and dissipation in liquid crystal electroconvection

    Science.gov (United States)

    Goldburg, Walter I.; Goldschmidt, Yadin Y.; Kellay, Hamid

    2002-11-01

    The power dissipation P( t) was measured in a liquid crystal (MBBA) driven by an ac voltage into the chaotic electroconvective state. In that state, the power fluctuates about its mean value . The quantity measured, and compared with the fluctuation theorem of Gallavotti and Cohen, is the dimensionless standard deviation of the fluctuations, σP/.

  20. Photosensitive Polymers for Liquid Crystal Alignment

    Science.gov (United States)

    Mahilny, U. V.; Stankevich, A. I.; Trofimova, A. V.; Muravsky, A. A.; Murauski, A. A.

    The peculiarities of alignment of liquid crystal (LC) materials by the layers of photocrosslinkable polymers with side benzaldehyde groups are considered. The investigation of mechanism of photostimulated alignment by rubbed benzaldehyde layer is performed. The methods of creation of multidomain aligning layers on the basis of photostimulated rubbing alignment are described.

  1. Liquid Crystal photonic Bandgap Fiber Devices

    DEFF Research Database (Denmark)

    Wei, Lei

    In this Ph.D. thesis, an experimental investigation of liquid crystal photonic bandgap (LCPBG) fiber devices and applications is presented. Photonic crystal fibers (PCFs) consist of a cladding microstructure with periodic index variations and a core defined by a defect of the structure....... The presence of liquid crystals (LCs) in the air-holes of the PCF transforms the fiber from a total internal reflection (TIR) guiding type into a photonic bandgap (PBG) guiding type. The light is confined to the silica core by coherent scattering from the LC-filled air-holes and the transmission spectrum...... of each LCPBG fiber. Finally, the applications for LCPBG fiber devices based on the on-chip platform design have been demonstrated in realizing microwave true-time delay and creating an electrically tunable fiber laser. Referatet mailes...

  2. Liquid Crystal photonic Bandgap Fiber Devices

    DEFF Research Database (Denmark)

    Wei, Lei

    In this Ph.D. thesis, an experimental investigation of liquid crystal photonic bandgap (LCPBG) fiber devices and applications is presented. Photonic crystal fibers (PCFs) consist of a cladding microstructure with periodic index variations and a core defined by a defect of the structure....... The presence of liquid crystals (LCs) in the air-holes of the PCF transforms the fiber from a total internal reflection (TIR) guiding type into a photonic bandgap (PBG) guiding type. The light is confined to the silica core by coherent scattering from the LC-filled air-holes and the transmission spectrum...... of each LCPBG fiber. Finally, the applications for LCPBG fiber devices based on the on-chip platform design have been demonstrated in realizing microwave true-time delay and creating an electrically tunable fiber laser. Referatet mailes...

  3. Colloidal cholesteric liquid crystal in spherical confinement

    Science.gov (United States)

    Li, Yunfeng; Jun-Yan Suen, Jeffrey; Prince, Elisabeth; Larin, Egor M.; Klinkova, Anna; Thérien-Aubin, Héloïse; Zhu, Shoujun; Yang, Bai; Helmy, Amr S.; Lavrentovich, Oleg D.; Kumacheva, Eugenia

    2016-08-01

    The organization of nanoparticles in constrained geometries is an area of fundamental and practical importance. Spherical confinement of nanocolloids leads to new modes of packing, self-assembly, phase separation and relaxation of colloidal liquids; however, it remains an unexplored area of research for colloidal liquid crystals. Here we report the organization of cholesteric liquid crystal formed by nanorods in spherical droplets. For cholesteric suspensions of cellulose nanocrystals, with progressive confinement, we observe phase separation into a micrometer-size isotropic droplet core and a cholesteric shell formed by concentric nanocrystal layers. Further confinement results in a transition to a bipolar planar cholesteric morphology. The distribution of polymer, metal, carbon or metal oxide nanoparticles in the droplets is governed by the nanoparticle size and yields cholesteric droplets exhibiting fluorescence, plasmonic properties and magnetic actuation. This work advances our understanding of how the interplay of order, confinement and topological defects affects the morphology of soft matter.

  4. Liquid crystals for holographic optical data storage

    DEFF Research Database (Denmark)

    Matharu, Avtar; Jeeva, S.; Ramanujam, P.S.

    2007-01-01

    A tutorial review is presented to inform and inspire the reader to develop and integrate strong scientific links between liquid crystals and holographic data storage, from a materials scientist's viewpoint. The principle of holographic data storage as a means of providing a solution...... to the information storage demands of the 21st century is detailed. Holography is a small subset of the much larger field of optical data storage and similarly, the diversity of materials used for optical data storage is enormous. The theory of polarisation holography which produces holograms of constant intensity......, is discussed. Polymeric liquid crystals play an important role in the development of materials for holographic storage and photoresponsive materials based on azobenzene are targeted for discussion due to their ease of photo- reversion between trans- and cis- states. Although the final polymer may not be liquid...

  5. James Fergason, a Pioneer in Advancing of Liquid Crystal Technology

    CERN Document Server

    Sparavigna, Amelia Carolina

    2013-01-01

    James Lee Fergason (1934 - 2008) focused his research on the liquid crystals. His studies correspond to a relevant part of the history of soft matter science and technology of liquid crystals. Here a discussion of some of his researches.

  6. Liquid crystal cell design of VGA field sequential color LCoS display

    Science.gov (United States)

    Liu, Yanyan; Geng, Weidong; Dai, Yongping

    2009-07-01

    The design of liquid crystal cell is an important factor to determine the display quality of LCoS display device. The goal of this paper is to gain VGA field sequential color (FSC) LCoS device used for near-to-eye system. The characteristics of optics and electrooptics for the twist nematic liquid crystal material and the material requirements of the FSC LCoS were studied. The LCOS liquid crystal cell optimized by dynamic parameter space method had an uniform reflectivity (about 90%) for the light with wave length from 450nm to 650nm. Both considering the electrooptic response curve of liquid crystal and the relationship between the contrast ratio and pixel size, we determined to use high speed twist nematic liquid crystal working in normally white mode. The liquid crystal cell gap and the pixel size were determined as 2.5um and 12um, respectively. The VGA FSC LCoS device was fabricated with SMIC 0.35um CMOS process and filled with LC-A liquid crystal of Merck in Varitronix. The measurement showed that the response time of liquid crystal from light to dark was 1.8ms and from dark to light was 4.4ms. The contrast ratio is bigger than 50:1. The LCoS displays well.

  7. 用液晶与聚合物混合材料的各向异性相分离制备快速响应液晶盒%Fast Switching Nematic Liquid Crystal Cell Fabricated by Anisotropic Phase-separation From a Liquid Crystal and Polymer Composite Material

    Institute of Scientific and Technical Information of China (English)

    王庆兵

    2004-01-01

    展示一种新型含有超薄液晶层( 小于1 μm) 的快速响应液晶盒, 总的响应时间( τon+τoff) 可以达到1.3 ms.这种液晶器件可以通过对一种液晶和聚合物混合材料的各向异性相分离制备获得. 偏光显微镜和扫描电子显微镜的观测结果确认了一种液晶/聚合物的双层膜机构的形成. 实验结果表明液晶层的厚度可以简单地通过改变液晶在混合材料中的含量来精确调节.这种制备方法可以用来制作含有超薄液晶层的快速显示液晶器件用于视频显示方面的应用.%It is demonstrated that a nematic liquid crystal (LC) cell containing a very thin (《1 μm) LC film can perform very fast switching, with a total response time as fast as 1.3 ms. Such type of LC devices can be prepared by a photo-induced anisotropic phase-separation from a nematic LC and polymer composite material. The formation of the LC/polymer bi-layer structure in the cell after the anisotropic phase-separation was confirmed by employing polarized light microscope and scanning electron microscope. It is also found that LC layer thickness can be fine tuned by adjusting the LC concentration in the composite mixture. Such a technique can be used to fabricate LC devices containing very thin LC film and performing fast switching for TV and Video applications where fast response time is required.

  8. Tuning of optical resonances of a microsphere with liquid crystal

    Science.gov (United States)

    Yilmaz, Hasan; Tamer, Mehmet Selman; Gürlü, Oguzhan; Serpengüzel, Ali

    2011-05-01

    Optical resonances are observed in the elastic light scattering form high refractive index glass microspheres placed on a single mode optical fiber coupler and in a liquid crystal. Placing the liquid crystal on the optical fiber coupler increases the non-resonant scattering, whereas placing the liquid crystal away from the optical coupler increases the resonant scattering. Optical resonances blue and red shift due to the placement and removal of the liquid crystal.

  9. Tuning of optical resonances of a microsphere with liquid crystal

    OpenAIRE

    Serpengüzel, Ali; Yılmaz, Huzeyfe; Tamer, Mehmet Selman; Gürlü, Oğuzhan

    2011-01-01

    Optical resonances are observed in the elastic light scattering form high refractive index glass microspheres placed on a single mode optical fiber coupler and in a liquid crystal. Placing the liquid crystal on the optical fiber coupler increases the non-resonant scattering, whereas placing the liquid crystal away from the optical coupler increases the resonant scattering. Optical resonances blue and red shift due to the placement and removal of the liquid crystal.

  10. Fabrication of Metarodielectric Photonic Crystals for Microwave Control

    Energy Technology Data Exchange (ETDEWEB)

    Takinami, Yohei; Kirihara, Soshu, E-mail: y-takinami@jwri.osaka-u.ac.jp [Smart Processing Reserch Center, Joining and Welding Reserch Institute, Osaka University (Japan)

    2011-05-15

    Photonic crystals have inspired a great deal of interests as key platforms for effective control of electromagnetic wave. They can suppress incident waves at a certain frequency by Bragg diffraction and exhibit photonic band gap. Photonic band gap structures can be applied for effective and compact wave control equipments. In this investigation, metal photonic crystals were fabricated by stereolithography and heat treatment process. Furthermore, metal-dielectric crystal was created through impregnation process of dielectric media. This concept of metal-dielectric photonic crystal is expected to contribute for not only the downsizing of electromagnetic wave devices, but also thermal flow control.

  11. Photoresponsive Liquid Crystals Based on Dihydroazulene

    DEFF Research Database (Denmark)

    Petersen, Anne Ugleholdt

    alignment between the transition dipole moment and the direction of the nematic host,showing that azulene could be a useful dye for doping into liquid crystalline host materials.As esters are a commonly used linking group in liquid crystalline chemistry, it was chosen toinvestigate the physical properties...... of a series of thioester analogues. Only few examples of liquidcrystalline thioesters have been reported in the literature. It was shown that these materials haveindeed been overlooked in the field of liquid crystal chemistry, as they were found to showinteresting properties.Chiral azulenes were made......, and a synthesis of alinear “double DHA”. As these projects did not end up being viable strategies for liquid crystallinematerials, they are not included in the thesis but the articles are attached in the appendix....

  12. The sweet world of liquid crystals : the synthesis of non-amphiphilic carbohydrate-derived liquid crystals

    NARCIS (Netherlands)

    Smits, Elly

    1998-01-01

    The research in carbohydrate-derived liquid crystals was initiated by a review article by Jeffrey in 1986. This is rather late if one considers that the research on liquid crystals underwent a revival already in the 1960s after the discovery of the liquid crystal display (LCD). Carbohydrates were de

  13. The sweet world of liquid crystals : The synthesis of non-amphiphilic carbohydrate-derived liquid crystals

    NARCIS (Netherlands)

    Smits, E

    1998-01-01

    The research in carbohydrate-derived liquid crystals was initiated by a review article by Jeffrey in 1986. This is rather late if one considers that the research on liquid crystals underwent a revival already in the 1960s after the discovery of the liquid crystal display (LCD). Carbohydrates were de

  14. Fabrication and Analysis of Photonic Crystals

    Science.gov (United States)

    Campbell, Dean J.; Korte, Kylee E.; Xia, Younan

    2007-01-01

    These laboratory experiments are designed to explore aspects of nanoscale chemistry by constructing and spectroscopically analyzing thin films of photonic crystals. Films comprised of colloidal spheres and polydimethylsiloxane exhibit diffraction-based stop bands that shift reversibly upon exposure to some common solvents. Topics covered in these…

  15. Design and Fabrication of SOI-based photonic crystal components

    DEFF Research Database (Denmark)

    Borel, Peter Ingo; Frandsen, Lars Hagedorn; Harpøth, Anders;

    2004-01-01

    We present examples of ultra-compact photonic crystal components realized in silicon-on-insulator material. We have fabricated several different types of photonic crystal waveguide components displaying high transmission features. This includes 60° and 120° bends, different types of couplers......, and splitters. Recently, we have designed and fabricated components with more than 200 nm bandwidths. Design strategies to enhance the performance include systematic variation of design parameters using finite-difference time-domain simulations and inverse design methods such as topology optimization....

  16. Biaxial nematic liquid crystals theory, simulation and experiment

    CERN Document Server

    Luckhurst, Geoffrey R

    2015-01-01

    Liquid Crystals are a state of matter that have properties between those of conventional liquid and those of a solid crystal. Thermotropic liquid crystals react to changes in temperature or, in some cases, pressure. The reaction of lyotropic liquid crystals, which are used in the manufacture of soaps and detergents, depends on the type of solvent they are mixed with. Since the accidental discovery of the chiral nematic (ordered) phase in 1888 many liquid crystal phases have been found, sometimes by chance and sometimes by design. The existence of one such phase was predicted by Freiser in 197

  17. Thermal diode made by nematic liquid crystal

    Energy Technology Data Exchange (ETDEWEB)

    Melo, Djair, E-mail: djfmelo@gmail.com [Instituto de Física, Universidade Federal de Alagoas, Av. Lourival Melo Mota, s/n, 57072-900 Maceió, AL (Brazil); Fernandes, Ivna [Instituto de Física, Universidade Federal de Alagoas, Av. Lourival Melo Mota, s/n, 57072-900 Maceió, AL (Brazil); Moraes, Fernando [Departamento de Física, CCEN, Universidade Federal da Paraíba, Caixa Postal 5008, 58051-900, João Pessoa, PB (Brazil); Departamento de Física, Universidade Federal Rural de Pernambuco, 52171-900 Recife, PE (Brazil); Fumeron, Sébastien [Institut Jean Lamour, Université de Lorraine, BP 239, Boulevard des Aiguillettes, 54506 Vandoeuvre les Nancy (France); Pereira, Erms [Escola Politécnica de Pernambuco, Universidade de Pernambuco, Rua Benfíca, 455, Madalena, 50720-001 Recife, PE (Brazil)

    2016-09-07

    This work investigates how a thermal diode can be designed from a nematic liquid crystal confined inside a cylindrical capillary. In the case of homeotropic anchoring, a defect structure called escaped radial disclination arises. The asymmetry of such structure causes thermal rectification rates up to 3.5% at room temperature, comparable to thermal diodes made from carbon nanotubes. Sensitivity of the system with respect to the heat power supply, the geometry of the capillary tube and the molecular anchoring angle is also discussed. - Highlights: • An escaped radial disclination as a thermal diode made by a nematic liquid crystal. • Rectifying effects comparable to those caused by carbon and boron nitride nanotubes. • Thermal rectification increasing with radius and decreasing with height of the tube. • Asymmetric BCs cause rectification from the spatial asymmetry produced by the escape. • Symmetric BCs provide rectifications smaller than those yields by asymmetric BCs.

  18. Modal liquid crystal array of optical elements.

    Science.gov (United States)

    Algorri, J F; Love, G D; Urruchi, V

    2013-10-21

    In this study, a novel liquid crystal array based on modal control principle is proposed and demonstrated. The advanced device comprises a six striped electrode structure that forms a configurable 2D matrix of optical elements. A simulation program based on the Frank-Oseen equations and modal control theory has been developed to predict the device electrooptic response, that is, voltage distribution, interference pattern and unwrapped phase. A low-power electronics circuit, that generates complex waveforms, has been built for driving the device. A combined variation of the waveform amplitude and phase has provided a high tuning versatility to the device. Thus, the simulations have demonstrated the generation of a liquid crystal prism array with tunable slope. The proposed device has also been configured as an axicon array. Test measurements have allowed us to demonstrate that electrooptic responses, simulated and empirical, are fairly in agreement.

  19. Graphene-based liquid crystal device.

    Science.gov (United States)

    Blake, Peter; Brimicombe, Paul D; Nair, Rahul R; Booth, Tim J; Jiang, Da; Schedin, Fred; Ponomarenko, Leonid A; Morozov, Sergey V; Gleeson, Helen F; Hill, Ernie W; Geim, Andre K; Novoselov, Kostya S

    2008-06-01

    Graphene is only one atom thick, optically transparent, chemically inert, and an excellent conductor. These properties seem to make this material an excellent candidate for applications in various photonic devices that require conducting but transparent thin films. In this letter, we demonstrate liquid crystal devices with electrodes made of graphene that show excellent performance with a high contrast ratio. We also discuss the advantages of graphene compared to conventionally used metal oxides in terms of low resistivity, high transparency and chemical stability.

  20. Hierarchical structuring of liquid crystal polymer-Laponite hybrid materials.

    Science.gov (United States)

    Tritschler, Ulrich; Zlotnikov, Igor; Zaslansky, Paul; Aichmayer, Barbara; Fratzl, Peter; Schlaad, Helmut; Cölfen, Helmut

    2013-09-03

    Biomimetic organic-inorganic composite materials were fabricated via one-step self-organization on three hierarchical levels. The organic component was a polyoxazoline with pendent cholesteryl and carboxyl (N-Boc-protected amino acid) side chains that was able to form a chiral nematic lyotropic phase and bind to positively charged inorganic faces of Laponite. The Laponite particles formed a mesocrystalline arrangement within the liquid-crystal (LC) polymer phase upon shearing a viscous dispersion of Laponite nanoparticles and LC polymer in DMF. Complementary analytical and mechanical characterization techniques (AUC, POM, TEM, SEM, SAXS, μCT, and nanoindentation) covering the millimeter, micrometer, and nanometer length scales reveal the hierarchical structures and properties of the composite materials consisting of different ratios of Laponite nanoparticles and liquid-crystalline polymer.

  1. Adsorption phenomena and anchoring energy in nematic liquid crystals

    CERN Document Server

    Barbero, Giovanni

    2005-01-01

    Despite the large quantity of phenomenological information concerning the bulk properties of nematic phase liquid crystals, little is understood about the origin of the surface energy, particularly the surface, interfacial, and anchoring properties of liquid crystals that affect the performance of liquid crystal devices. Self-contained and unique, Adsorption Phenomena and Anchoring Energy in Nematic Liquid Crystals provides an account of new and established results spanning three decades of research into the problems of anchoring energy and adsorption phenomena in liquid crystals.The book contains a detailed discussion of the origin and possible sources of anchoring energy in nematic liquid crystals, emphasizing the dielectric contribution to the anchoring energy in particular. Beginning with fundamental surface and anchoring properties of liquid crystals and the definition of the nematic phase, the authors explain how selective ion adsorption, dielectric energy density, thickness dependence, and bias voltage...

  2. Method for fabricating apatite crystals and ceramics

    Science.gov (United States)

    Soules, Thomas F.; Schaffers, Kathleen I.; Tassano, Jr., John B.; Hollingsworth, Joel P.

    2013-09-10

    The present invention provides a method of crystallizing Yb:C-FAP [Yb.sup.3+:Ca.sub.5(PO.sub.4).sub.3F], by dissolving the Yb:C-FAP in an acidic solution, following by neutralizing the solution. The present invention also provides a method of forming crystalline Yb:C-FAP by dissolving the component ingredients in an acidic solution, followed by forming a supersaturated solution.

  3. Structures of cyano-biphenyl liquid crystals

    Science.gov (United States)

    Chu, Yuan-Chao; Tsang, Tung; Rahimzadeh, E.; Yin, L.

    1989-01-01

    The structures of p-alkyl- p'-cyano- bicyclohexanes, C(n)H(2n+1) (C6H10)(C6H10) CN (n-CCH), and p-alkyl- p'-cyano- biphenyls, C(n)H(2n+1) (C6H4)(C6H4) CN (n-CBP), were studied. It is convenient to use an x ray image intensification device to search for symmetric x ray diffraction patterns. Despite the similarities in molecular structures of these compounds, very different crystal structures were found. For the smectic phase of 2CCH, the structure is close to rhombohedral with threefold symmetry. In contrast, the structure is close to hexagonal close-packed with two molecules per unit cell for 4CCH. Since intermolecular forces may be quite weak for these liquid crystals systems, it appears that crystal structures change considerably when the alkyl chain length is slightly altered. Different structures were also found in the crystalline phase of n-CBP for n = 6 to 9. For n = 7 to 9, the structures are close to monclinic. The structures are reminiscent of the smectic-A liquid crystal structures with the linear molecules slightly tilted away from the c-axis. In contrast, the structure is quite different for n = 6 with the molecules nearly perpendicular to the c-axis.

  4. Tunable and rotatable polarization controller using photonic crystal fiber filled with liquid crystal

    DEFF Research Database (Denmark)

    Wei, Lei; Alkeskjold, Thomas Tanggaard; Bjarklev, Anders Overgaard

    2010-01-01

    We design and fabricate a compact tunable and rotatable polarization controller using liquid crystal photonic band gap fibers. The electrically and thermally induced phase shift in the Poincaré sphere and corresponding birefringence change are measured. The direction of the electric field...... is managed by connecting four electrodes in different electrode configurations, and the thermal tunability is controlled by on-chip heaters. According to the results, a quarter-wave plate and a half-wave plate working in the wavelength range of 1520–1600 nm are experimentally demonstrated....

  5. Fabrication and measurements on coupled photonic crystal cavities

    DEFF Research Database (Denmark)

    Schubert, Martin; Nielsen, Henri Thyrrestrup; Frandsen, Lars Hagedorn;

    Quasi-three dimensional photonic crystals can be realized by fabricating thin membranes of high index material hanging in air patterned with sub-micron holes to create a photonic band gap for optical confinement in plane and total internal reflection for out of plane confinement. Introducing...... defects into the photonic crystal gives rise to defect states in the form of small confined modes. By embedding an active gain medium like quantum dots into the membrane makes it possible to realize lasers with ultra-small mode volumes and low thresholds. Unfortunately single cavity photonic crystal...

  6. Fabrication of silicon inverse woodpile photonic crystals

    Energy Technology Data Exchange (ETDEWEB)

    Hermatschweiler, Martin; Wegener, Martin [DFG-Center for Functional Nanostructures (CFN) and Institut fuer Angewandte Physik, Universitaet Karlsruhe (TH), 76131 Karlsruhe (Germany); Ozin, Geoffrey A. [Department of Chemistry, University of Toronto, Toronto, Ontario M5S 3H6 (Canada); Ledermann, Alexandra; Freymann, Georg von [Institut fuer Nanotechnologie, Forschungszentrum Karlsruhe in der Helmholtz-Gemeinschaft, 76021 Karlsruhe (Germany)

    2007-07-01

    We fabricate silicon inverse woodpile structures for the first time. Direct laser writing of polymeric templates and a novel silicon-singleinversion procedure lead to structures with gap/midgap ratios of 14.2% centered at 2.5 {mu}m wavelength. First, polymer templates are fabricated by direct laser writing or other means. Next, we deposit a thin silica coating via atomic layer deposition (ALD) on the polymer and - without removing the polymer - infiltrate the composite structure with Si via Si chemical vapor deposition (CVD). The silica shell provides sufficient and reliable stabilization for the high temperature CVD process. Finally, the silica is etched out and the polymer is calcined in air, leading to a Si inverse woodpile structure. Optical measurements and comparison to bandstructure and scattering-matrix calculations reveal a gap/midgap ratio of 14.2% centered at 2.5 {mu}m. An optimized structure could open a band gap with a gap/midgap ratio of up to 20.5%.

  7. Perdeuterated liquid crystals for near infrared applications

    Science.gov (United States)

    Kula, P.; Bennis, N.; Marć, P.; Harmata, P.; Gacioch, K.; Morawiak, P.; Jaroszewicz, L. R.

    2016-10-01

    For majority of Liquid Crystalline compounds the absorption occurs at two spectral regions: ultraviolet UV (due to electronic excitations) and infrared IR (caused by molecular vibrations). Both cause the absorption which deteriorates electro-optical modulation abilities of LC. In the MWIR and LWIR regions, there are many fundamental molecular vibration bands. The most intense are the ones with high anharmonicity, which in the case of LCs corresponds to the Csbnd H bonds, especially present in the aliphatic chains. In the NIR region, overtone molecular vibration bands derived from IR region begin to appear. In the case of Csbnd H bond system, the first overtones are present at 1.6-1.7 μm. To reduce NIR absorptions, perdeuterated Liquid crystal has been proposed. In this paper, we report the physical and optical properties of liquid crystals based on polarimetry measurements method. We also provide a polar decomposition of experimentally measured Mueller matrix in order to determine polarization properties of the device such as depolarization and diattenuation which cannot be obtained from absorption spectra.

  8. On-chip tunable long-period grating devices based on liquid crystal photonic bandgap fibers

    DEFF Research Database (Denmark)

    Wei, Lei; Weirich, Johannes; Alkeskjold, Thomas Tanggaard;

    2009-01-01

    We design and fabricate an on-chip tunable long-period grating device by integrating a liquid crystal photonic bandgap fiber on silicon structures. The transmission axis of the device can be electrically rotated in steps of 45° as well as switched on and off with the response time in the millisec...

  9. Fabrication of Greener Membranes from Ionic Liquid Solutions

    KAUST Repository

    Kim, DooLi

    2017-06-01

    Membrane technology plays a crucial role in different separation processes such as biotechnology, pharmaceutical, and food industries, drinking water supply, and wastewater treatment. However, there is a growing concern that solvents commonly used for membrane fabrication, such as dimethylformamide (DMF), dimethylacetamide (DMAc), and 1-methyl-2-pyrrolidone (NMP), are toxic to the environment and human health. To explore the possibility of substituting these toxic solvents by less toxic or safer solvents, polymers commonly used for membrane fabrication, such as polyacrylonitrile (PAN), cellulose acetate (CA), polyethersulfone (PES), and poly(ether imide sulfone) (EXTEMTM), were dissolved in ionic liquids. Flat sheet and hollow fiber membranes were then fabricated. The thermodynamics of the polymer solutions, the kinetics of phase inversion and other factors, which resulted in significant differences in the membrane structure, compared to those of membranes fabricated from more toxic solvents, were investigated. Higher water permeance with smaller pores, unique and uniform morphologies, and narrower pore size distribution, were observed in the ionic liquid-based membranes. Furthermore, comparable performance on separation of peptides and proteins with various molecular weights was achieved with the membranes fabricated from ionic liquid solutions. In summary, we propose less hazardous polymer solutions to the environment, which can be used for the membrane fabrication with better performance and more regular morphology.

  10. Liquid crystal-based hydrophone arrays

    Science.gov (United States)

    Brodzeli, Zourab; Silvestri, Leonardo; Michie, Andrew; Chigrinov, Vladimir G.; Guo, Qi; Pozhidaev, Eugene P.; Kiselev, Alexei D.; Ladouceur, Francois

    2012-09-01

    We describe a fiber optic hydrophone array system that could be used for underwater acoustic surveillance applications (e.g. military, counter terrorist, and customs authorities in protecting ports and harbors), offshore production facilities or coastal approaches as well as various marine applications. In this paper, we propose a new approach to underwater sonar systems using the voltage-controlled liquid crystals and simple multiplexing method. The proposed method permits measurement of sound under water at multiple points along an optical fiber using the low cost components and standard single mode fiber, without complex interferometric measurement techniques, electronics or demodulation software.

  11. Thermal diode made by nematic liquid crystal

    Science.gov (United States)

    Melo, Djair; Fernandes, Ivna; Moraes, Fernando; Fumeron, Sébastien; Pereira, Erms

    2016-09-01

    This work investigates how a thermal diode can be designed from a nematic liquid crystal confined inside a cylindrical capillary. In the case of homeotropic anchoring, a defect structure called escaped radial disclination arises. The asymmetry of such structure causes thermal rectification rates up to 3.5% at room temperature, comparable to thermal diodes made from carbon nanotubes. Sensitivity of the system with respect to the heat power supply, the geometry of the capillary tube and the molecular anchoring angle is also discussed.

  12. Carbon Nanoparticles in Nematic Liquid Crystals

    Institute of Scientific and Technical Information of China (English)

    S.Eren San; Mustafa Okutan; O(g)uz K(o)ysal; Yusuf Yer-li

    2008-01-01

    Fullerene G60,C70,single-walled and multi-walled carbon nanotubes and graphene sheets are doped to nematic liquid crystal(LC)host in the same percentage.Planar samples of these mixtures are prepared and our measurements constitute an optimization basis for possible applications.Fullerene balls are found to be the best compatible material for optical aims and reorientation of LC molecules,while the carbon nanotubes experience some reorientation possibility in LC media and graphene layers are good barriers to preserve reorientation.

  13. Computer simulation of confined liquid crystal dynamics

    CERN Document Server

    Webster, R E

    2001-01-01

    are performed of the formation of structures in confined smectic systems where layer tilt is induced by an imposed surface pretilt. Results show that bookshelf, chevron and tilled layer structures are observable in a confined Gay-Berne system. The formation and stability of the chevron structure are shown to be influenced by surface slip. Results are presented from a series of simulations undertaken to determine whether dynamic processes observed in device-scale liquid crystal cells confined between aligning substrates can be simulated in a molecular system using parallel molecular dynamics of the Gay-Berne model. In a nematic cell, on removal of an aligning field, initial near-surface director relaxation can induce flow, termed 'backflow' in the liquid. This, in turn, can cause director rotation, termed 'orientational kickback', in the centre of the cell. Simulations are performed of the relaxation in nematic systems confined between substrates with a common alignment on removal of an aligning field. Results...

  14. Metallic dielectric photonic crystals and methods of fabrication

    Energy Technology Data Exchange (ETDEWEB)

    Chou, Jeffrey Brian; Kim, Sang-Gook

    2016-12-20

    A metallic-dielectric photonic crystal is formed with a periodic structure defining a plurality of resonant cavities to selectively absorb incident radiation. A metal layer is deposited on the inner surfaces of the resonant cavities and a dielectric material fills inside the resonant cavities. This photonic crystal can be used to selectively absorb broadband solar radiation and then reemit absorbed radiation in a wavelength band that matches the absorption band of a photovoltaic cell. The photonic crystal can be fabricated by patterning a sacrificial layer with a plurality of holes, into which is deposited a supporting material. Removing the rest of the sacrificial layer creates a supporting structure, on which a layer of metal is deposited to define resonant cavities. A dielectric material then fills the cavities to form the photonic crystal.

  15. Electro-optical switching by liquid-crystal controlled metasurfaces

    CERN Document Server

    Decker, Manuel; Minovich, Alexander; Staude, Isabelle; Miroshnichenko, Andrey E; Chigrin, Dmitry; Neshev, Dragomir N; Jagadish, Chennupati; Kivshar, Yuri S

    2013-01-01

    We study the optical response of a metamaterial surface created by a lattice of split-ring resonators covered with a nematic liquid crystal and demonstrate millisecond timescale switching between electric and magnetic resonances of the metasurface. This is achieved due to a high sensitivity of liquid-crystal molecular reorientation to the symmetry of the metasurface as well as to the presence of a bias electric field. Our experiments are complemented by numerical simulations of the liquid-crystal reorientation.

  16. Theoretical modeling of orientational effects in liquid-crystal layers

    Science.gov (United States)

    Melnikova, E. A.

    2005-11-01

    In the work the approximate analytical relations describing the director distribution in depth of a plane-parallel layer of nematic liquid crystal are presented. The analytical expression determining the orientational effect of the periodic surface in a system "relief grating - liquid crystal" is derived. Its diffraction characteristics are studied theoretically. Relaxation kinetics of the director in a plane-parallel layer of nematic liquid crystal is considered taking account of the microscopic inertia moment.

  17. Nanoconfinement-Induced Structures in Chiral Liquid Crystals

    OpenAIRE

    2013-01-01

    We employ Monte Carlo simulations in a specialized isothermal-isobaric and in the grand canonical ensemble to study structure formation in chiral liquid crystals as a function of molecular chirality. Our model potential consists of a simple Lennard-Jones potential, where the attractive contribution has been modified to represent the orientation dependence of the interaction between a pair of chiral liquid-crystal molecules. The liquid crystal is confined between a pair of planar and atomicall...

  18. Photonic crystals advances in design, fabrication, and characterization

    CERN Document Server

    Busch, Kurt; Wehrspohn, Ralf B; Föll, Helmut

    2006-01-01

    The majority of the contributions in this topically edited book stems from the priority program SPP 1113 ""Photonische Kristalle"" run by the Deutsche Forschungsgemeinschaft (DFG), resulting in a survey of the current state of photonic crystal research in Germany. The first part of the book describes methods for the theoretical analysis of their optical properties as well as the results. The main part is dedicated to the fabrication, characterization and modeling of two- and three-dimensional photonic crystals, while the final section presents a wide spectrum of applications: gas sensors, micr

  19. 21 CFR 880.6970 - Liquid crystal vein locator.

    Science.gov (United States)

    2010-04-01

    ...) MEDICAL DEVICES GENERAL HOSPITAL AND PERSONAL USE DEVICES General Hospital and Personal Use Miscellaneous... skin by displaying the color changes of heat sensitive liquid crystals (cholesteric esters)....

  20. Ordering properties of oligomeric columnar discotic liquid crystals

    NARCIS (Netherlands)

    Umesh, C.P.

    2015-01-01

    The synthesis and liquid crystalline ordering properties of oligomeric discotic liquid crystals were investigated. The phase behaviour and surface ordering properties are dependent on among others core type, spacer length and fluorination.    

  1. Multistability in planar liquid crystal wells

    KAUST Repository

    Luo, Chong

    2012-06-08

    A planar bistable liquid crystal device, reported in Tsakonas, is modeled within the Landau-de Gennes theory for nematic liquid crystals. This planar device consists of an array of square micrometer-sized wells. We obtain six different classes of equilibrium profiles and these profiles are classified as diagonal or rotated solutions. In the strong anchoring case, we propose a Dirichlet boundary condition that mimics the experimentally imposed tangent boundary conditions. In the weak anchoring case, we present a suitable surface energy and study the multiplicity of solutions as a function of the anchoring strength. We find that diagonal solutions exist for all values of the anchoring strength W≥0, while rotated solutions only exist for W≥W c>0, where W c is a critical anchoring strength that has been computed numerically. We propose a dynamic model for the switching mechanisms based on only dielectric effects. For sufficiently strong external electric fields, we numerically demonstrate diagonal-to-rotated and rotated-to-diagonal switching by allowing for variable anchoring strength across the domain boundary. © 2012 American Physical Society.

  2. Dispersive shock waves in nematic liquid crystals

    Science.gov (United States)

    Smyth, Noel F.

    2016-10-01

    The propagation of coherent light with an initial step intensity profile in a nematic liquid crystal is studied using modulation theory. The propagation of light in a nematic liquid crystal is governed by a coupled system consisting of a nonlinear Schrödinger equation for the light beam and an elliptic equation for the medium response. In general, the intensity step breaks up into a dispersive shock wave, or undular bore, and an expansion fan. In the experimental parameter regime for which the nematic response is highly nonlocal, this nematic bore is found to differ substantially from the standard defocusing nonlinear Schrödinger equation structure due to the effect of the nonlocality of the nematic medium. It is found that the undular bore is of Korteweg-de Vries equation-type, consisting of bright waves, rather than of nonlinear Schrödinger equation-type, consisting of dark waves. In addition, ahead of this Korteweg-de Vries bore there can be a uniform wavetrain with a short front which brings the solution down to the initial level ahead. It is found that this uniform wavetrain does not exist if the initial jump is below a critical value. Analytical solutions for the various parts of the nematic bore are found, with emphasis on the role of the nonlocality of the nematic medium in shaping this structure. Excellent agreement between full numerical solutions of the governing nematicon equations and these analytical solutions is found.

  3. Fabrication and characterization of chalcogenide glass photonic crystal waveguides.

    Science.gov (United States)

    Suzuki, Keijiro; Hamachi, Yohei; Baba, Toshihiko

    2009-12-07

    We report on the fabrication of chalcogenide glass (Ag-As(2)Se(3)) photonic crystal waveguides and the first detailed characterization of the linear and nonlinear optical properties. The waveguides, fabricated by e-beam lithography and ICP etching exhibit typical transmission spectra of photonic crystal waveguides, and exhibit high optical nonlinearity. Nonlinear phase shift of 1.5pi through self-phase modulation is observed at 0.78 W input peak power in a 400 microm long device. The effective nonlinear parameter gamma(eff) estimated from this result reaches 2.6 x 10(4) W(-1)m(-1). Four-wave mixing is also observed in the waveguide, while two-photon absorption at optical communication wavelengths is sufficiently small and the corresponding figure of merit is larger than 11.

  4. Liquid crystal devices based on photoalignment and photopatterning materials

    Science.gov (United States)

    Chigrinov, Vladimir

    2014-02-01

    Liquid crystal (LC) display and photonics devices based on photo-alignment and photo-patterning LC cells are developed. A fast switchable grating based on ferroelectric liquid crystals and orthogonal planar alignment by means of photo alignments. Both 1D and 2D gratings have been constructed. The proposed diffracting element provides fast response time of around 20 μs, contrast of 7000:1 and high diffraction efficiency, at the electric field of 6V/μm. A switchable LC Fresnel zone lens was also developed with the efficiency of ~42% that can be further improved, and the switching time for the 3 μm thick cell is ~6.7 ms which is relatively fast in comparison of existing devices. Thus, because of the photoalignment technology the fabrication of Fresnel lens became considerably simpler than others. A thin high spatial resolution, photo-patterned micropolarizer array for complementary metal-oxide-semiconductor (CMOS) image sensors was implemented for the complete optical visualization of so called "invisible" objects, which are completely transparent (reflective) and colorless. Four Stokes parameters, which fully characterized the reflected light beam can be simultaneously detected using the array of photo-patterned polarizers on CMOS sensor plate. The cheap, high resolution photo-patterned LC matrix sensor was developed to be able successfully compete with the expensive and low reliable wire grid polarizer patterned arrays currently used for the purpose.

  5. Electro-optically tunable diffraction grating with photoaligned liquid crystals

    Science.gov (United States)

    Węgłowski, Rafał; Kozanecka-Szmigiel, Anna; Piecek, Wiktor; Konieczkowska, Jolanta; Schab-Balcerzak, Ewa

    2017-10-01

    This work shows the possibility of fabricating one- and two-dimensional diffraction structures based on liquid crystals photoaligned with the layers of photosensitive azobenzene poly(ester imide). The gratings involve a micron-sized planar-twisted nematic alignment. The diffraction efficiency of these gratings is controlled by a uniform electric field applied across the cell. The electro-optical measurements showed short switching times (0.8 ms and 7 ms for τrise and τdecay respectively) and low driving electric fields (1 . 5 V / μm) of 1st order diffracted light. The LC grating is regarded as an amplitude grating in the low electric field region and a phase grating in the high electric field region. Moreover the diffraction efficiency is polarization-independent in the wide range of external electric fields.

  6. Hydrogen-Bonded Liquid Crystal Nanocomposites.

    Science.gov (United States)

    Roohnikan, Mahdi; Toader, Violeta; Rey, Alejandro; Reven, Linda

    2016-08-23

    Nanoparticle-liquid crystal (NP-LC) composites based on hydrogen bonding were explored using a model system. The ligand shells of 3 nm diameter zirconium dioxide nanoparticles (ZrO2 NPs) were varied to control their interaction with 4-n-hexylbenzoic acid (6BA). The miscibility and effect of the NPs on the nematic order as a function of particle concentration was characterized by polarized optical microscopy (POM), fluorescence microscopy and (2)H NMR spectroscopy. Nonfunctionalized ZrO2 NPs have the lowest miscibility and strongest effect on the LC matrix due to irreversible binding of 6BA to the NPs via a strong zirconium carboxylate bond. The ZrO2 NPs were functionalized with 6-phosphonohexanoic acid (6PHA) or 4-(6-phosphonohexyloxy)benzoic acid (6BPHA) which selectively bind to the ZrO2 NP surface via the phosphonic acid groups. The miscibility was increased by controlling the concentration of the pendant CO2H groups by adding hexylphosphonic acid (HPA) to act as a spacer group. Fluorescence microscopy of lanthanide doped ZrO2 NPs showed no aggregates in the nematic phase below the NP concentration where aggregates are observed in the isotropic phase. The functionalized NPs preferably concentrate into LC defects and any remaining isotropic liquid but are still present throughout the nematic liquid at a lower concentration.

  7. Chromatic dispersion of liquid crystal infiltrated capillary tubes and photonic crystal fibers

    DEFF Research Database (Denmark)

    Rasmussen, Per Dalgaard; Lægsgaard, Jesper; Bang, Ole

    2006-01-01

    We consider chromatic dispersion of capillary tubes and photonic crystal fibers infiltrated with liquid crystals. A perturbative scheme for inclusion of material dispersion of both liquid crystal and the surrounding waveguide material is derived. The method is used to calculate the chromatic disp...

  8. Fabrication and Characterization of Suspended Carbon Nanotube Devices in Liquid

    Energy Technology Data Exchange (ETDEWEB)

    Artyukhin, A; Stadermann, M; Stroeve, P; Bakajin, O; Noy, A

    2006-10-30

    Suspended carbon nanotube devices are a promising platform for future bio-electronic applications. Suspended carbon nanotube transistors have been previously fabricated in air; however all previous attempts to bring them into liquid failed. We analyze forces acting on the suspended nanotube devices during immersion into liquids and during device operation and show that surface tension forces acting on the suspended nanotubes during transfer into the liquid phase are responsible for the nanotube damage. We have developed a new strategy that circumvents these limitations by coating suspended nanotubes with a rigid inorganic shell in the gas phase. The coating reinforces the nanotubes and allows them to survive transfer through the interface. Subsequent removal of the coating in the solution phase restores pristine suspended nanotubes. We demonstrate that devices fabricated using this technique preserve their original electrical characteristics.

  9. Electro-optical switching of liquid crystals of graphene oxide

    Science.gov (United States)

    Song, Jang-Kun

    Electric field effects on aqueous graphene-oxide (GO) dispersions are reviewed in this chapter. In isotropic and biphasic regimes of GO dispersions, in which the inter-particle friction is low, GO particles sensitively respond to the application of electric field, producing field-induced optical birefringence. The electro-optical sensitivity dramatically decreases as the phase transits to the nematic phase; the increasing inter-particle friction hinders the rotational switching of GO particles. The corresponding Kerr coefficient reaches the maximum near the isotropic to biphasic transition concentration, at which the Kerr coefficient is found be c.a. 1:8 · 10-5 mV-2, the highest value ever reported in all Kerr materials. The exceptionally large Kerr effect arises from the Maxwell- Wagner polarization of GO particles with an extremely large aspect ratio and a thick electrical double layer (EDL). The polarization sensitively depends on the ratio of surface and bulk conductivities in dispersions. As a result, low ion concentration in bulk solvent is highly required to achieve a quality electro-optical switching in GO dispersions. Spontaneous vinylogous carboxylic reaction in GO particles produces H+ ions, resulting in spontaneous degradation of electro-optical response with time, hence the removal of residual ions by using a centrifuge cleaning process significantly improves the electro-optical sensitivity. GO particle size is another important parameter for the Kerr coefficient and the response time. The best performance is observed in a GO dispersion with c.a. 0.5 μm mean size. Dielectrophoretic migration of GO particles can be also used to manipulate GO particles in solution. Using these unique features of GO dispersions, one can fabricate GO liquid crystal devices similar to conventional liquid crystal displays; the large Kerr effect allows fabricating a low power device working at extremely low electric fields.

  10. Development and fabrication of an advanced liquid cooling garment

    Science.gov (United States)

    Hixon, C. W.

    1978-01-01

    A tube/fin concept liquid cooling garment head cooler was developed, fabricated and delivered to NASA-ARC. The head cooler was fabricated from polyurethane film which sandwiches the transport fluid tubing and a thermally conductive fin material. The head cooler garment is sewn to form a skull cap and covered with a comfort liner. In addition, two Neonate heating garments were fabricated and supplied to NASA for further finishing and use in medical tests. The resulting garment is flexible, elastic and conforms to the head comfortably. Tests on a tube/fin element of identical construction as the head cooler demonstrated good thermal effectiveness. Use of commercially available materials and development of relatively simple fabrication techniques give the potential for a low garment cost.

  11. Alignment technology and applications of liquid crystal devices

    CERN Document Server

    Takatoh, Kohki; Hasegawa, Ray; Koden, Mitsushiro; Itoh, Nobuyuki; Hasegawa, Masaki

    2005-01-01

    Alignment phenomena are characteristic of liquid crystalline materials, and understanding them is critically important in understanding the essential features and behavior of liquid crystals and the performance of Liquid Crystal Devices (LCDs). Furthermore, in LCD production lines, the alignment process is of practical importance. Alignment Technologies and Applications of Liquid Crystal Devices demonstrates both the fundamental and practical aspects of alignment phenomena in liquid crystals. The physical basis of alignment phenomena is first introduced in order to aid the understanding of the various physical phenomena observed in the interface between liquid crystalline materials and alignment layer surfaces. Methods for the characterization of surfaces, which induce the alignment phenomena, and of the alignment layer itself are introduced. These methods are useful for the research of liquid crystalline materials and devices in academic research as well as in industry. In the practical sections, the alignme...

  12. Flat liquid crystal diffractive lenses with variable focus and magnification

    Science.gov (United States)

    Valley, Pouria

    Non-mechanical variable lenses are important for creating compact imaging devices. Various methods employing dielectrically actuated lenses, membrane lenses, and liquid crystal lenses were previously proposed [1-4]. In This dissertation the design, fabrication, and characterization of innovative flat tunable-focus liquid crystal diffractive lenses (LCDL) are presented. LCDL employ binary Fresnel zone electrodes fabricated on Indium-Tin-Oxide using conventional micro-photolithography. The light phase can be adjusted by varying the effective refractive index of a nematic liquid crystal sandwiched between the electrodes and a reference substrate. Using a proper voltage distribution across various electrodes the focal length can be changed between several discrete values. Electrodes are shunted such that the correct phase retardation step sequence is achieved. If the number of 2pi zone boundaries is increased by a factor of m the focal length is changed from f to f/m based on the digitized Fresnel zone equation: f = rm2/2mlambda, where r m is mth zone radius, and lambda is the wavelength. The chromatic aberration of the diffractive lens is addressed and corrected by adding a variable fluidic lens. These LCDL operate at very low voltage levels (+/-2.5V ac input), exhibit fast switching times (20-150 ms), can have large apertures (>10 mm), and small form factor, and are robust and insensitive to vibrations, gravity, and capillary effects that limit membrane and dielectrically actuated lenses. Several tests were performed on the LCDL including diffraction efficiency measurement, switching dynamics, and hybrid imaging with a refractive lens. Negative focal lengths are achieved by adjusting the voltages across electrodes. Using these lenses in combination, magnification can be changed and zoom lenses can be formed. These characteristics make LCDL a good candidate for a variety of applications including auto-focus and zoom lenses in compact imaging devices such as camera

  13. Synthesis of azobenzene-containing liquid crystalline gelator for use in liquid crystal gels

    Institute of Scientific and Technical Information of China (English)

    Guang Wang; Xiao Liang Zhao; Yue Zhao

    2008-01-01

    A liquid crystalline gelator containing the azobenzene chromophore was synthesized for the first time; it was used to form self-assembled network in nematic liquid crystals resulting in liquid crystal gels with distinct features.? 2008 Guang Wang. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.

  14. Electrochromic blueshift in polymer-dispersed liquid-crystal cells.

    Science.gov (United States)

    Ramsey, R A; Sharma, S C

    2004-10-01

    Electrochromic blueshift in the absorption band of polymer-dispersed liquid-crystal cells is reported as a function of applied electric field. The changes in the peak absorption wavelength, absorption broadening, and their possible relationships with the nonlinear optical properties of polymer-dispersed liquid-crystal cells are discussed.

  15. Electrically modulated transparent liquid crystal-optical grating projection

    DEFF Research Database (Denmark)

    Buss, Thomas; Smith, Cameron; Kristensen, Anders

    2013-01-01

    A transparent, fully integrated electrically modulated projection technique is presented based on light guiding through a thin liquid crystal layer covering sub-wavelength gratings. The reported device operates at 10 V with response times of 4.5 ms. Analysis of the liquid crystal alignment shows ...

  16. Time-programmed helix inversion in phototunable liquid crystals

    NARCIS (Netherlands)

    Asshoff, Sarah J.; Iamsaard, Supitchaya; Bosco, Alessandro; Cornelissen, Jeroen J. L. M.; Feringa, Ben L.; Katsonis, Nathalie

    2013-01-01

    Doping cholesteric liquid crystals with photo-responsive molecules enables controlling the colour and polarisation of the light they reflect. However, accelerating the rate of relaxation of these photo-controllable liquid crystals remains challenging. Here we show that the relaxation rate of the

  17. Microwave modulation characteristics of twisted liquid crystals with chiral dopant

    Directory of Open Access Journals (Sweden)

    Rui Yuan

    2017-01-01

    Full Text Available Adding a chiral dopant in twisted nematic (TN liquid crystal cell can stabilize the orientation of liquid crystal molecules, particularly in high TN (HTN or super TN (STN liquid crystal cells. The difference in pitches in liquid crystal is induced by the chiral dopant, and these different pitches affect the orientation of liquid crystal director under an external applied voltage and influence the characteristics of microwave modulation. To illustrate this point, the microwave phase shift per unit length (MPSL versus voltage is calculated on the basis of the elastic theory of liquid crystal and the finite-difference iterative method. Enhancing the pitch induced by the chiral dopant in liquid crystal increases the MPSLs, but the stability of the twisted structures is decreased. Thus, appropriate pitches of 100d, 4d, and 2d can be applied in TN, HTN, and STN cells with cell gap d to enhance the characteristics of microwave modulation and stabilize the structures in twisted cell. This method can improve the characteristics of liquid crystal microwave modulators such that the operating voltage and the size of such phase shifters can be decreased.

  18. Liquid-crystal intraocular adaptive lens with wireless control

    NARCIS (Netherlands)

    Simonov, A.N.; Vdovine, G.V.; Loktev, M.

    2007-01-01

    We present a prototype of an adaptive intraocular lens based on a modal liquid-crystal spatial phase modulator with wireless control. The modal corrector consists of a nematic liquid-crystal layer sandwiched between two glass substrates with transparent low- and high-ohmic electrodes, respectively.

  19. Liquid-crystal intraocular adaptive lens with wireless control

    NARCIS (Netherlands)

    Simonov, A.N.; Vdovine, G.V.; Loktev, M.

    2007-01-01

    We present a prototype of an adaptive intraocular lens based on a modal liquid-crystal spatial phase modulator with wireless control. The modal corrector consists of a nematic liquid-crystal layer sandwiched between two glass substrates with transparent low- and high-ohmic electrodes, respectively.

  20. Substrate-induced bulk alignment of liquid crystals

    DEFF Research Database (Denmark)

    Zhang, Zhengping; Chakrabarti, A.; Mouritsen, Ole G.;

    1996-01-01

    The Gay-Berne model for liquid crystals in the presence of a substrate surface is studied using the hybrid Monte Carlo method. A simple non-mean-field substrate-molecule potential is proposed to describe the effects of rubbed polymer-coated substrates on the liquid crystals. Effects...

  1. Time-programmed helix inversion in phototunable liquid crystals

    NARCIS (Netherlands)

    Asshoff, Sarah J.; Iamsaard, Supitchaya; Bosco, Alessandro; Cornelissen, Jeroen J. L. M.; Feringa, Ben L.; Katsonis, Nathalie

    2013-01-01

    Doping cholesteric liquid crystals with photo-responsive molecules enables controlling the colour and polarisation of the light they reflect. However, accelerating the rate of relaxation of these photo-controllable liquid crystals remains challenging. Here we show that the relaxation rate of the cho

  2. Time-programmed helix inversion in phototunable liquid crystals.

    Science.gov (United States)

    Asshoff, Sarah J; Iamsaard, Supitchaya; Bosco, Alessandro; Cornelissen, Jeroen J L M; Feringa, Ben L; Katsonis, Nathalie

    2013-05-14

    Doping cholesteric liquid crystals with photo-responsive molecules enables controlling the colour and polarisation of the light they reflect. However, accelerating the rate of relaxation of these photo-controllable liquid crystals remains challenging. Here we show that the relaxation rate of the cholesteric helix is fully determined by helix inversion of the molecular dopants.

  3. Slovenian Pre-Service Teachers' Conceptions about Liquid Crystals

    Science.gov (United States)

    Pavlin, Jerneja; Vaupotic, Natasa; Glazar, Sasa A.; Cepic, Mojca; Devetak, Iztok

    2011-01-01

    A total of 448 first-year university students participated in the study at the beginning of the academic year 2009/10. A paper-pencil liquid crystal questionnaire (LCQ) comprising 20 items was used to evaluate students' general conceptions related to liquid crystals, their properties and to the state of matter in general. The results show that 2/3…

  4. Role of Lifshitz Invariants in Liquid Crystals

    Directory of Open Access Journals (Sweden)

    Amelia Sparavigna

    2009-06-01

    Full Text Available The interaction between an external action and the order parameter, via a dependence described by a so-called Lifshitz invariant, is very important to determine the final configuration of liquid crystal cells. The external action can be an electric field applied to the bulk or the confinement due to free surfaces or cell walls. The Lifshitz invariant includes the order parameter in the form of an elastic strain. This coupling between elastic strains and fields, inserted in a Landau-Ginzburg formalism, is well known and gives rise to striction effects causing undulations in the director configuration. We want to discuss here the role of Lifshitz coupling terms, following an approach similar to that introduced by Dzyaloshinskii for magnetic materials. Case studies on nematics in planar and cylindrical cells are also proposed.

  5. Band transport model for discotic liquid crystals

    Science.gov (United States)

    Lever, L. J.; Kelsall, R. W.; Bushby, R. J.

    2005-07-01

    A theoretical model is presented for charge transport in discotic liquid crystals in which a charge is delocalized over more than one lattice site. As such, charge transport is via a banded conduction process in a narrow bandwidth system and takes place over coherent lengths of a few molecules. The coherent lengths are disrupted by the geometrical disorder of the system and are treated as being terminated by quantum tunnel barriers. The transmission probabilities at these barriers have been calculated as a function of the charge carrier energy. Phononic interactions are also considered and the charge carrier scattering rates are calculated for intermolecular and intramolecular vibrations. The results of the calculations have been used to develop a Monte Carlo simulation of the charge transport model. Simulated data are presented and used to discuss the nature of the tunnel barriers required to reproduce experimental data. We find that the model successfully reproduces experimental time of flight data including temperature dependence.

  6. Liquid-crystal-based hyperspectral image projector

    Science.gov (United States)

    Linnenberger, Anna; Masterson, Hugh; Rice, Joseph P.; Stockley, Jay

    2010-04-01

    A hyperspectral image projector (HIP) is introduced that is built with liquid crystal based spatial light modulators (SLM) as opposed to micromirror arrays. The use of an SLM as a broadband intensity modulator presents several benefits to this application. With slight modifications to the SLM design, SLMs can be built for a wide range of spectral regimes, ranging from the ultraviolet (UV) to the long-wavelength infrared (LWIR). SLMs can have a large pixel pitch, significantly reducing diffraction in the mid-wavelength infrared (MWIR) and LWIR. Liquid crystal based devices offer direct analog intensity modulation, thus eliminating flicker from time sequential drive schemes. SLMs allow for an on-axis configuration, enabling a simple and compact optical layout. The design of the HIP system is broken into two parts consisting of a spectral and spatial engine. In the spectral engine a diffraction grating is used to disperse a broadband source into spectral components, where an SLM modulates the relative intensity of the components to dynamically generate complex spectra. The recombined output is fed to the spatial engine which is used to construct two-dimensional scenes. The system is used to simulate a broad range of real world environments, and will be delivered to the National Institute of Standards and Technology as an enabling tool for the development of calibration standards and performance testing techniques for multispectral and hyperspectral imagers. The focus of this paper is on a visible-band HIP system; however, related work is presented with regard to SLM use in the MWIR and LWIR.

  7. Distributed optical fibre devices based on liquid crystal infiltrated photonic crystal fibers

    DEFF Research Database (Denmark)

    Alkeskjold, Thomas Tanggaard; Broeng, Jes; Hermann, D.S.

    2004-01-01

    We describe a new class of hybrid photonic crystal fibers, which are liquid crystal infiltrated fibers. Using these fibers, we demonstrate 'distributed' tunable filter and switching functionalities operating by the photonic bandgap effect....

  8. Advection of nematic liquid crystals by chaotic flow

    CERN Document Server

    O'Naraigh, Lennon

    2016-01-01

    Consideration is given to the effects of inhomogeneous shear flow (both regular and chaotic) on nematic liquid crystals in a planar two-dimensional geometry. The Landau-de Gennes equation coupled to an externally-prescribed flow field is the basis for the study: this is solved numerically in a periodic spatial domain. The focus is on a limiting case where the advection is passive, such that variations in the liquid-crystal properties do not feed back into the equation of motion for the uid velocity. The numerical simulations demonstrate that the coarsening of the liquid-crystal domains is arrested by the ow. The nature of the arrest is different depending on whether the flow is regular or chaotic. For the specific case where tumbling is important, the flow has a strong effect on the the liquid-crystal morphology: this provides a mechanism for controlling the shape of the liquid-crystal domains.

  9. Plasmonic Photopatterning of Complex Molecular Orientations in Liquid Crystals

    Science.gov (United States)

    Guo, Yubing; Jiang, Miao; Peng, Chenhui; Sun, Kai; Yaroshchuk, Oleg; Lavrentovich, Oleg; Wei, Qi-Huo

    Aligning liquid crystal (LC) molecules in spatially non-uniform patterns are highly demanded for applications such as programmable origami and liquid crystal enabled nonlinear electrokinetics. We developed a high resolution projection photoalignment technique for patterning arbitrary LC alignment fields. The photoalignment is based on carefully engineered metasurfaces, or dubbed as plasmonic metamasks (PMMs). When illuminated by light, the PMMs generate patterns of both light intensity and polarization. By projecting the light transmitted through the PMMs onto liquid crystal cells coated with photosensitive materials, alignment patterns predesigned in polarization patterns of the PMMs can be imposed in liquid crystals. This technique makes the liquid crystal alignment a repeatable and scalable process similar to conventional photolithography, promising various applications. National Science Foundation CMMI-1436565.

  10. Nuclear Magnetic Resonance Quantum Computing Using Liquid Crystal Solvents

    CERN Document Server

    Yannoni, C S; Vandersypen, L M K; Miller, D C; Kubinec, M G; Chuang, I L; Yannoni, Costantino S.; Sherwood, Mark H.; Vandersypen, Lieven M.K.; Miller, Dolores C.; Kubinec, Mark G.; Chuang, Isaac L.

    1999-01-01

    Liquid crystals offer several advantages as solvents for molecules used for NMR quantum computing (NMRQC). The dipolar coupling between nuclear spins manifest in the NMR spectra of molecules oriented by a liquid crystal permits a significant increase in clock frequency, while short spin-lattice relaxation times permit fast recycling of algorithms, and save time in calibration and signal-enhancement experiments. Furthermore, the use of liquid crystal solvents offers scalability in the form of an expanded library of spin-bearing molecules suitable for NMRQC. These ideas are demonstrated with the successful execution of a 2-qubit Grover search using a molecule ($^{13}$C$^{1}$HCl$_3$) oriented in a liquid crystal and a clock speed eight times greater than in an isotropic solvent. Perhaps more importantly, five times as many logic operations can be executed within the coherence time using the liquid crystal solvent.

  11. Electrially tunable photonic bandgap guidance in a liquid crystal filled photonic crystal fiber

    DEFF Research Database (Denmark)

    Haakestad, Magnus W.; Alkeskjold, Thomas Tanggaard; Nielsen, Martin Dybendal;

    2005-01-01

    Tunable bandgap guidance is obtained by filling the holes of a solid core photonic crystal fiber with a nematic liquid crystal and applying an electric field. The response times are measured and found to be in the millisecond range.......Tunable bandgap guidance is obtained by filling the holes of a solid core photonic crystal fiber with a nematic liquid crystal and applying an electric field. The response times are measured and found to be in the millisecond range....

  12. Liquid filling of photonic crystal fibres for grating writing

    DEFF Research Database (Denmark)

    Sørensen, Henrik Rokkjær; Canning, John; Lægsgaard, Jesper;

    2007-01-01

    liquid filling of photonic crystal fibres reduces the scattering from air–glass interfaces during Bragg grating writing in many layered photonic crystal fibres. Within experimental uncertainty, the grating index modulation of a grating written in germanium-doped photonic crystal fibre with 10 rings...

  13. Liquid Crystal Gel Reduces Age Spots by Promoting Skin Turnover

    OpenAIRE

    Mina Musashi; Ariella Coler-Reilly; Teruaki Nagasawa; Yoshiki Kubota; Satomi Kato; Yoko Yamaguchi

    2014-01-01

    Studies have shown that liquid crystals structurally resembling the intercellular lipids in the stratum corneum can beneficially affect the skin when applied topically by stimulating the skin’s natural regenerative functions and accelerating epidermal turnover. In the present study, the effects of applying low concentrations of a liquid crystal gel of our own creation were evaluated using epidermal thickening in mouse skin as an assay for effective stimulation of epidermal turnover. A liquid ...

  14. Skin and Liquid Crystal: A brief review on their similarities

    Directory of Open Access Journals (Sweden)

    Hamdan Suhaimi

    2016-08-01

    Full Text Available Looking oneself directly into a mirror and what does one see? The answer is of course one’s face. Taking good care of ones skin is synonymous to beauty and healthy life style. However, beauty last only as thick as a skin layer so the saying goes. While, liquid crystal, as the name implies, it looks like a crystal but flow like a liquid. Thus, how doesthis stucture called liquid crystal relate to skin and beauty? As most of us are aware skin and liquid crystalall around us, be it naturally or in technological applications. Our body body are covered with skin and liquid crystals. Surprise as it may seem but that is a fact, albeit peculiar to some. Classic example of natural liquid crystals are protein and cell membranes, while in industrial application such as electronic devices,for instance, screen of our laptop, digital watches and latest application in cosmeceuticals that isliquid crystal crystal emulsion. The question now arise is how does skin relate to liquid crystal? Why is it that this structure is crucial to the structure and function of skin? How does it relate to the delivery system of active ingredients which is important in many cosmeceuticals product? This paper will provide a brief review on the relationship of these two entities and present some work done in this area of interest. A model for the lipids of the top most layer of the skin namely stratum corneum will be highlighted.

  15. Fabrication of Polyacrylonitrile Hollow Fiber Membranes from Ionic Liquid Solutions

    KAUST Repository

    Kim, Dooli

    2015-10-08

    The interest in green processes and products has increased to reduce the negative impact of many industrial processes to the environment. Solvents, which play a crucial role in the fabrication of membranes, need to be replaced by sustainable and less toxic solvent alternatives for commonly used polymers. The purpose of this study is the fabrication of greener hollow fiber membranes based on polyacrylonitrile (PAN), substituting dimethylformamide (DMF) by less toxic mixtures of ionic liquids (IL) and dimethylsulfoxide (DMSO). A thermodynamic analysis was conducted, estimating the Gibbs free energy of mixing to find the most convenient solution compositions. Hollow fiber membranes were manufactured and optimized. As a result, a uniform pattern and high porosity were observed in the inner surface of the membranes prepared from the ionic liquid solutions. The membranes were coated with a polyamide layer by interfacial polymerization the hollow fiber membranes were applied in forward osmosis experiments by using sucrose solutions as draw solution.

  16. A NEW METHOD TO ALIGN LIQUID CRYSTAL MOLECULES BY LINEAR PHOTO-POLYMERIZATION FOR LIQUID CRYSTAL DISPLAY

    Institute of Scientific and Technical Information of China (English)

    LIANG ZHAO-YAN; FANG KUN; XUAN LI; HUANG XI-MIN; DING BAO-QUAN; LU RAN; ZHAO YING-YING

    2000-01-01

    A new technique to uniformly align liquid crystal molecules is presented.The technique is based on producing an anisotropic surface on the glass substrate coated with photo-polymers by photo-polymerization of linear polarized UVlight.The orientation of liquid crystal molecules is governed by the direction of the polarized vector of UV-light.Using this method,we have studied the photo-polymer PSi-CM aligning LC 6710A molecules.The liquid crystal microscopic texture between crossed polarizers,optical retardation from liquid crystal layers and electro-optical properties of twisted nematic liquid crystal display cell are obtained,which was prepared with one side -photo-alignment and the other siderebbed substrate.

  17. H-Bond stabilized columnar discotic liquid crystals

    NARCIS (Netherlands)

    Paraschiv, I.

    2007-01-01

    Since 1977, more than 2300 publications on discotic (disk-like) liquid crystalline materials have appeared. Discotic liquid crystals, which usually consist of polyaromatic molecules surrounded by long peripheral alkyl tails, can form liquid crystalline mesophases in a wide temperature range. Within

  18. H-Bond stabilized columnar discotic liquid crystals

    NARCIS (Netherlands)

    Paraschiv, I.

    2007-01-01

    Since 1977, more than 2300 publications on discotic (disk-like) liquid crystalline materials have appeared. Discotic liquid crystals, which usually consist of polyaromatic molecules surrounded by long peripheral alkyl tails, can form liquid crystalline mesophases in a wide temperature range. Within

  19. Smart windows based on cholesteric liquid crystals (Conference Presentation)

    Science.gov (United States)

    Khandelwal, Hitesh; Debije, Michael G.; Schenning, Albert P. H. J.

    2017-02-01

    With increase in global warming, use of active cooling and heating devices are continuously increasing to maintain interior temperature of built environment, greenhouses and cars. To reduce the consumption of tremendous amount of energy on cooling and heating devices we need an improved control of transparent features (i.e. windows). In this respect, smart window which is capable for reflecting solar infrared energy without interfering with the visible light would be very attractive. Most of the technologies developed so far are to control the visible light. These technologies block visual contact to the outside world which cause negative effects on human health. An appealing method to selectively control infrared transmission is via utilizing the reflection properties of cholesteric liquid crystals. In our research, we have fabricated a smart window which is capable of reflecting different amount of solar infrared energy depending on the specific climate conditions. The reflection bandwidth can be tuned from 120 nm to 1100 nm in the infrared region without interfering with the visible solar radiations. Calculations reveal that between 8% and 45% of incident solar infrared light can be reflected with a single cell. Simulation studies predicted that more than 12% of the energy spent on heating, cooling and lighting in the built environment can be saved by using the fabricated smart window compared to standard double glazing window.

  20. Direct-writing of complex liquid crystal patterns.

    Science.gov (United States)

    Miskiewicz, Matthew N; Escuti, Michael J

    2014-05-19

    We report on a direct-write system for patterning of arbitrary, high-quality, continuous liquid crystal (LC) alignment patterns. The system uses a focused UV laser and XY scanning stages to expose a photoalignment layer, which then aligns a subsequent LC layer. We intentionally arrange for multiple overlapping exposures of the photoalignment material by a scanned Gaussian beam, often with a plurality of polarizations and intensities, in order to promote continuous and precise LC alignment. This type of exposure protocol has not been well investigated, and sometimes results in unexpected LC responses. Ultimately, this enables us to create continuous alignment patterns with feature sizes smaller than the recording beam. We describe the system design along with a thorough mathematical system description, starting from the direct-write system inputs and ending with the estimated alignment of the LC. We fabricate a number of test patterns to validate our system model, then design and fabricate a number of interesting well-known elements, including a q-plate and polarization grating.

  1. Micropatterning with a liquid crystal display (LCD) projector.

    Science.gov (United States)

    Itoga, Kazuyoshi; Kobayashi, Jun; Yamato, Masayuki; Okano, Teruo

    2014-01-01

    Photolithography has been applied to biological applications such as cell and protein micropatterning and the fabrication of microfluidic channels. However, the preparation of photomasks for projecting micropattern lighting images is often time consuming and costly. Therefore, we have developed maskless photolithography devices by modifying the optics of commercially available liquid crystal display (LCD) projectors from extended to reduced projection. The developed second and third devices produce practically a centimeter-scale micropattern by dividing an original large mask pattern into several patterns, which are individually and synchronously exposed to substrates with a motorized XY-stage, applying them to cell micropatterning and polydimethylsiloxane (PDMS) microfluidic device production. The first part of this chapter describes the developments of the maskless photolithography devices. The second part describes the exposure control system with a motorized XY-stage. The third part describes the applications of devices to cell micropatterning. The last part describes the application of the devices to the fabrication of the PDMS microfluidic channel. Maskless photolithography with an LCD projector has a large advantage with no requirement for a photomask. In particular, the maskless photolithography devices show a greater power by optimizing the conditions of pattern size and shape.

  2. Crystal-liquid-gas phase transitions and thermodynamic similarity

    CERN Document Server

    Skripov, Vladimir P; Schmelzer, Jurn W P

    2006-01-01

    Professor Skripov obtained worldwide recognition with his monograph ""Metastable liquids"", published in English by Wiley & Sons. Based upon this work and another monograph published only in Russia, this book investigates the behavior of melting line and the properties of the coexisting crystal and liquid phase of simple substances across a wide range of pressures, including metastable states of the coexisting phases. The authors derive new relations for the thermodynamic similarity for liquid-vapour phase transition, as well as describing solid-liquid, liquid-vapor and liquid-liquid phase tra

  3. Rapid fabrication of large area binary polystyrene colloidal crystals

    Science.gov (United States)

    Luo, Chun-Li; Yang, Rui-Xia; Yan, Wei-Guo; Zhao, Jian; Yang, Guang-Wu; Jia, Guo-Zhi

    2016-07-01

    Binary colloidal crystals (BCCs) possess great potentials in tuning material and optical properties. In this paper, the combination of interface transferred method and spin-coating method is used to fabricate BCCs with different patterns via controlling the size ratio of small (S) to large (L) colloidal spheres and the spin speeds. It is found that BCCs formed LS2, LS4 and LS6 by changing the size ratio. In addition, there are some new and complicated structures, such as LS12, Janus arrays, formed at the low spin speed. This simple assembly method has potential to allow for the creation of optical metmaterials and the plasmonic structures with chiral optical properties.

  4. Fabrication of Phase-Change Polymer Colloidal Photonic Crystals

    Directory of Open Access Journals (Sweden)

    Tianyi Zhao

    2014-01-01

    Full Text Available This paper presents the preparation of phase-change polymer colloidal photonic crystals (PCs by assembling hollow latex spheres encapsulated with dodecanol for the first time. The monodispersed hollow latex spheres were obtained by phase reversion of monodispersed core-shell latex spheres in the n-hexane, which dissolves the PS core and retains the PMMA/PAA shell. The as-prepared phase-change colloidal PCs show stable phase-change behavior. This fabrication of phase-change colloidal PCs would be significant for PC’s applications in functional coatings and various optic devices.

  5. Fabric and crystal characteristics of Bohai and Arctic sea ice

    Institute of Scientific and Technical Information of China (English)

    李志军; 康建成; 蒲毅彬

    2002-01-01

    The fabrics and crystals of Bohai one-year ice show that the noncontinuous ice growth rate enables the level ice layers with different amount of air bubbles to be formed in lower part of an ice sheet which was clearly seen from CT technology; typical grain ice and columnar ice occur in the grey ice which grows in stable water; thaw-refrozen ice and rafted ice have their specific crystal characters. On the Arctic sea ice, the ice core located at 72°24.037′N, 153°33.994′W and 2.2 m in length was a 3-year ice floe and a new sort of crystal was found, which is defined as refrozen clastic pieces. The crystal profile of the ice core 4.86 m in length located at 74°58.614′N, 160°31.830′W shows the evidence that ice ridge changed into hummock.

  6. New scintillating media based on liquid crystals for particle detectors

    CERN Document Server

    Barnik, M I; Vasilchenko, V G; Golovkin, S V; Medvedkov, A M; Soloviev, A S

    2000-01-01

    The study results of optical, photoluminiscent and scintillation properties of a liquid crystal 4-pentyl-4'-cyanobiphenyl are presented. The scintillation light output of this liquid crystal is about 35% of crystal anthracene, its main decay time constants are 4 and 14 ns, and the maximum of light emission spectrum is about 400 nm. The light output of a dissolution of green emitting light scintillation dopant R6 in the liquid crystal is about 120% of crystal anthracene. The light output of the frozen dissolution measured at -112 deg. C is about 2.5 times higher as observed at +20 deg. C. In the uniaxially oriented liquid crystal, the predominant intensity direction of emitted light is pointed perpendicular to the liquid crystal director and an appreciable part of the emitted light is elliptically polarized. The possibility to use scintillation properties of liquid crystals is considered both for the improvement of existing particle detector characteristics and for the creation of new gated particle detectors.

  7. Random lasing in dye-doped polymer dispersed liquid crystal film

    Science.gov (United States)

    Wu, Rina; Shi, Rui-xin; Wu, Xiaojiao; Wu, Jie; Dai, Qin

    2016-09-01

    A dye-doped polymer-dispersed liquid crystal film was designed and fabricated, and random lasing action was studied. A mixture of laser dye, nematic liquid crystal, chiral dopant, and PVA was used to prepare the dye-doped polymer-dispersed liquid crystal film by means of microcapsules. Scanning electron microscopy analysis showed that most liquid crystal droplets in the polymer matrix ranged from 30 μm to 40 μm, the size of the liquid crystal droplets was small. Under frequency doubled 532 nm Nd:YAG laser-pumped optical excitation, a plurality of discrete and sharp random laser radiation peaks could be measured in the range of 575-590 nm. The line-width of the lasing peak was 0.2 nm and the threshold of the random lasing was 9 mJ. Under heating, the emission peaks of random lasing disappeared. By detecting the emission light spot energy distribution, the mechanism of radiation was found to be random lasing. The random lasing radiation mechanism was then analyzed and discussed. Experimental results indicated that the size of the liquid crystal droplets is the decisive factor that influences the lasing mechanism. The surface anchor role can be ignored when the size of the liquid crystal droplets in the polymer matrix is small, which is beneficial to form multiple scattering. The transmission path of photons is similar to that in a ring cavity, providing feedback to obtain random lasing output. Project supported by the National Natural Science Foundation of China (Grant No. 61378042), the Colleges and Universities in Liaoning Province Outstanding Young Scholars Growth Plans, China (Grant No. LJQ2015093), and Shenyang Ligong University Laser and Optical Information of Liaoning Province Key Laboratory Open Funds, China.

  8. Recent advances in liquid-crystal fiber optics and photonics

    Science.gov (United States)

    Woliński, T. R.; Siarkowska, A.; Budaszewski, D.; Chychłowski, M.; Czapla, A.; Ertman, S.; Lesiak, P.; Rutkowska, K. A.; Orzechowski, K.; Sala-Tefelska, M.; Sierakowski, M.; DÄ browski, R.; Bartosewicz, B.; Jankiewicz, B.; Nowinowski-Kruszelnicki, E.; Mergo, P.

    2017-02-01

    Liquid crystals over the last two decades have been successfully used to infiltrate fiber-optic and photonic structures initially including hollow-core fibers and recently micro-structured photonic crystal fibers (PCFs). As a result photonic liquid crystal fibers (PLCFs) have been created as a new type of micro-structured fibers that benefit from a merge of "passive" PCF host structures with "active" LC guest materials and are responsible for diversity of new and uncommon spectral, propagation, and polarization properties. This combination has simultaneously boosted research activities in both fields of Liquid Crystals Photonics and Fiber Optics by demonstrating that optical fibers can be more "special" than previously thought. Simultaneously, photonic liquid crystal fibers create a new class of fiber-optic devices that utilize unique properties of the photonic crystal fibers and tunable properties of LCs. Compared to "classical" photonic crystal fibers, PLCFs can demonstrate greatly improved control over their optical properties. The paper discusses the latest advances in this field comprising PLCFs that are based on nanoparticles-doped LCs. Doping of LCs with nanoparticles has recently become a common method of improving their optical, magnetic, electrical, and physical properties. Such a combination of nanoparticles-based liquid crystals and photonic crystal fibers can be considered as a next milestone in developing a new class of fiber-based optofluidic systems.

  9. Role of nucleation of bile liquid crystal in gallstone formation

    Institute of Scientific and Technical Information of China (English)

    Hai-Ming Yang; Jie Wu; Jin-Yi Li; Lin Gu; Min-Fei Zhou

    2003-01-01

    AIM: To explore the role of bile liquid crystal in the process of gallbladder stone formation and to provide bases for preventing and treating cholelithiasis.METHODS: 46 guinea pigs, half males and half females,were randomly divided into control group and stone-causing group. Normal feed and stoneleading feed were used respectively to raise guinea pigs in the control group and stone-causing group. The guinea pigs were killed in three batches during the raising period. Under polarizing microscope, the pattern changes of bile liquid crystal in the gallbladder biles of the guinea pigs in the control group and stone-causing group were dynamicly observed respectively in single-blind trial.RESULTS: It was found that there were few crystals in the guinea pigs′biles of the control group, and their Malta cross was small and scattered, and existed in single form. With the increase of the feeding days, bile liquid crystals grew and Malta cross became bigger with their distribution densified, denser somewhere, but always existed in single form. While those of the stone-causing group had more bile liquid crystals, Malta cross was big and merged in strings.With the increase of the feeding days, bile liquid crystals grew in amount and strings of Malta cross increased and became bigger. The crosses in strings were arranged more and more regularly and they gradually changed into stone crystals.CONCLUSION: Formation of gallbladder stone is a process of nucleation from different substances, and the causing-stone gallbladder bile is a constantly supersaturated solution, and bile liquid crystal is a nucleation factor in the formation of gallbladder stones. The process of nucleation includes gathering, merging and phase-changing of bile liquid crystals.The process of gathering, merging of bile liquid crystal is the key to nucleation.

  10. Liquid crystals in micron-scale droplets, shells and fibers

    Science.gov (United States)

    Urbanski, Martin; Reyes, Catherine G.; Noh, JungHyun; Sharma, Anshul; Geng, Yong; Subba Rao Jampani, Venkata; Lagerwall, Jan P. F.

    2017-04-01

    The extraordinary responsiveness and large diversity of self-assembled structures of liquid crystals are well documented and they have been extensively used in devices like displays. For long, this application route strongly influenced academic research, which frequently focused on the performance of liquid crystals in display-like geometries, typically between flat, rigid substrates of glass or similar solids. Today a new trend is clearly visible, where liquid crystals confined within curved, often soft and flexible, interfaces are in focus. Innovation in microfluidic technology has opened for high-throughput production of liquid crystal droplets or shells with exquisite monodispersity, and modern characterization methods allow detailed analysis of complex director arrangements. The introduction of electrospinning in liquid crystal research has enabled encapsulation in optically transparent polymeric cylinders with very small radius, allowing studies of confinement effects that were not easily accessible before. It also opened the prospect of functionalizing textile fibers with liquid crystals in the core, triggering activities that target wearable devices with true textile form factor for seamless integration in clothing. Together, these developments have brought issues center stage that might previously have been considered esoteric, like the interaction of topological defects on spherical surfaces, saddle-splay curvature-induced spontaneous chiral symmetry breaking, or the non-trivial shape changes of curved liquid crystal elastomers with non-uniform director fields that undergo a phase transition to an isotropic state. The new research thrusts are motivated equally by the intriguing soft matter physics showcased by liquid crystals in these unconventional geometries, and by the many novel application opportunities that arise when we can reproducibly manufacture these systems on a commercial scale. This review attempts to summarize the current understanding of

  11. Self-Restoration by Smectic Layer Structures of Monostable Ferroelectric Liquid Crystal in Flexible Devices

    Science.gov (United States)

    Fujikake, Hideo; Sato, Hiroto; Isaka, Fumito; Murashige, Takeshi; Kikuchi, Hiroshi; Kurita, Taiichiro; Sato, Fumio

    2004-12-01

    In this paper, we discuss a self-restoration phenomenon affecting smectic layer deformation and molecular alignment in monostable ferroelectric liquid crystals used for flexible displays. First, the mechanical stability of tilted ‘bookshelf’ structures of smectic layers anchored on substrates using alignment layers was examined by precisely shearing two substrates. The microscopic texture of a monostable ferroelectric liquid crystal showed tolerance to shearing and the self-restoration was thought to be due to a smectic layer reconnection phenomenon, whereas a conventional bistable ferroelectric liquid crystal film generated alignment defects due to the tilting of the stable molecular direction. We then fabricated a flexible monostable device containing fine polymer fiber networks, where anchoring of molecularly aligned polymer fibers led to the observation of monostable liquid crystal switching. A uniform liquid crystal alignment was maintained in a 100 mm× 100 mm device even after bending more than 10000 times at a minimum radius of curvature of 20 mm, due to the enhanced shearing tolerance of the smectic layer structure.

  12. Optic properties of bile liquid crystals in human body

    Institute of Scientific and Technical Information of China (English)

    Hai Ming Yang; Jie Wu; Jian Li Zhou; Li Jun He; Xian Fang Xu; Jin Yi Li

    2000-01-01

    AIM To further study the properties of bile liquid crystals, and probe into the relationship between bile liquid crystals and gallbladder stone formation, and provide evidence for the prevention and treatment of cholecystolithissis. METNODS The optic properties of bile liquid crystals in human body were determined by the method of crystal optics under polarizing microscope with plane polarized light and perpendicular polarized light. RESULTS Under a polarizing microscope with plane polarized light, bile liquid crystals scattered in bile appeared round, oval or irregularly round. The color of bile liquid crystals was a little lighter than that of the bile around. When the stage was turned round, the color of bile liquid crystals or the darkness and lightness of the color did not change obviously. On the border between bile liquid crystals and the bile around, brighter Becke-Line could be observed. When the microscope tube is lifted, Becke. Line moved inward, and when lowered,Becke-Line moved outward. Under a perpendicular polarized light, bile liquid crystals showd some special interference patterns, called Malta cross. When the stage was tuming round at an angle of 360°, the Malta cross showed four times of extinction. In the vibrating direction of 45° angle of relative to upper and lower polarizing plate, gypsum test-board with optical path difference of 530 nm was inserted, the first and the third quadrants of Malta cross appeared to be blue, and the second and the fourth quadrants appeared orange. When mica test-board with optical path difference of 147 nm was inserted, the first and the third quadrants of Malta cross appeared yellow, and the second and the fourth quadrants appeared dark grey. CONCLUSION The bile liquid crystals were distributed in bile in the form of global grains. Their polychroism and absorption were slight,but the edge and Becke-Line were very clear. Its refractive index was larger than that of the bile.These liquid crystals were uniaxial

  13. A liquid crystal thermography calibration with true color image processing

    Institute of Scientific and Technical Information of China (English)

    Yu Rao; Shusheng Zang; Minghai Huang

    2009-01-01

    Liquid crystal thermography is a high-resolution,non-intrusive optical technique for full-field temperature measurement.We present the detailed calibration data for the thermochromic liquid crystal(TLC)with a usefill range of 41-60 ℃.The calibration is done with true color image processing by using an isothermal calibrator.The hue-temperature curve of the TLC is obtained,and the measurement uncertainty is analyzed.Combined with the image noise reduction technique of a 5×5 median filter,the measurement accuracy of the liquid crystal thermography can be significantly improved by approximately 57.1%.

  14. Passive Temperature Stabilization of Silicon Photonic Devices Using Liquid Crystals

    Directory of Open Access Journals (Sweden)

    Joanna Ptasinski

    2014-03-01

    Full Text Available In this work we explore the negative thermo-optic properties of liquid crystal claddings for passive temperature stabilization of silicon photonic integrated circuits. Photonic circuits are playing an increasing role in communications and computing, but they suffer from temperature dependent performance variation. Most existing techniques aimed at compensation of thermal effects rely on power hungry Joule heating. We show that integrating a liquid crystal cladding helps to minimize the effects of a temperature dependent drift. The advantage of liquid crystals lies in their high negative thermo-optic coefficients in addition to low absorption at the infrared wavelengths.

  15. Liquid crystals beyond displays chemistry, physics, and applications

    CERN Document Server

    Li, Quan

    2012-01-01

    The chemistry, physics, and applications of liquid crystals beyond LCDs Liquid Crystals (LCs) combine order and mobility on a molecular and supramolecular level. But while these remarkable states of matter are most commonly associated with visual display technologies, they have important applications for a variety of other fields as well. Liquid Crystals Beyond Displays: Chemistry, Physics, and Applications considers these, bringing together cutting-edge research from some of the most promising areas of LC science. Featuring contributions from respected researchers from around the globe, th

  16. 2015 Liquid Crystals Gordon Research Conference and Gordon Research Seminar

    Science.gov (United States)

    2015-10-20

    physics, chemistry , and biology of systems that possess liquid crystallinity will be emphasized. The conference will bring together an outstanding group...supramolecular chemistry and multifunctional materials, (iii) liquid crystalline glasses and metastable phases, (iv) liquid crystallinity in biological...USA) "Templating Polymers with Lyotropic Liquid Crystals via Photopolymerization Using a Gemini Surfactant " 11:55 am - 12:00 pm Discussion 12:00 pm

  17. Structural Transitions in Cholesteric Liquid Crystal Droplets

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Ye; Bukusoglu, Emre; Martinez-Gonzalez, Jose A.; Rahimi, Mohammad; Roberts, Tyler F.; Zhang, Rui; Wang, Xiaoguang; Abbott, Nicholas L.; de Pablo, Juan J.

    2016-07-01

    Confinement of cholesteric liquid crystals (ChLC) into droplets leads to a delicate interplay between elasticity, chirality, and surface energy. In this work, we rely on a combination of theory and experiments to understand the rich morphological behavior that arises from that balance. More specifically, a systematic study of micrometer-sized ChLC droplets is presented as a function of chirality and surface energy (or anchoring). With increasing chirality, a continuous transition is observed from a twisted bipolar structure to a radial spherical structure, all within a narrow range of chirality. During such a transition, a bent structure is predicted by simulations and confirmed by experimental observations. Simulations are also able to capture the dynamics of the quenching process observed in experiments. Consistent with published work, it is found that nanoparticles are attracted to defect regions on the surface of the droplets. For weak anchoring conditions at the nanoparticle surface, ChLC droplets adopt a morphology similar to that of the equilibrium helical phase observed for ChLCs in the bulk. As the anchoring strength increases, a planar bipolar structure arises, followed by a morphological transition to a bent structure. The influence of chirality and surface interactions are discussed in the context of the potential use of ChLC droplets as stimuli-responsive materials for reporting molecular adsorbates.

  18. Stability of Disclinations in Nematic Liquid Crystals

    Institute of Scientific and Technical Information of China (English)

    WANG Yu-Sheng; YANG Guo-Hong; TIAN Li-Jun; DUAN Yi-Shi

    2006-01-01

    In the light of φ-mapping method and topological current theory, the stability of disclinations around a spherical particle in nematic liquid crystals is studied. We consider two different defect structures around a spherical particle: disclination ring and point defect at the north or south pole of the particle. We calculate the free energy of these different defects in the elastic theory. It is pointed out that the total Frank free energy density can be divided into two parts. One is the distorted energy density of director field around the disclinations. The other is the free energy density of disclinations themselves, which is shown to be concentrated at the defect and to be topologically quantized in the unit of (k -k24)π/2. It is shown that in the presence of saddle-splay elasticity a dipole (radial and hyperbolic hedgehog) configuration that accompanies a particle with strong homeotropic anchoring takes the structure of a small disclination ring, not a point defect.

  19. Controlled thermal expansion printed wiring boards based on liquid crystal polymer dielectrics

    Science.gov (United States)

    Knoll, Thomas E.; Blizard, Kent; Jayaraj, K.; Rubin, Leslie S.

    1994-01-01

    Dielectric materials based on innovative Liquid Crystal Polymers (LCP's) have been used to fabricate surface mount printed wiring boards (PWB's) with a coefficient of thermal expansion matched to leadless ceramic chip carriers. Proprietary and patented polymer processing technology has resulted in self reinforcing material with balanced in-plane mechanical properties. In addition, LCP's possess excellent electrical properties, including a low dielectric constant (less than 2.9) and very low moisture absorption (less than 0.02%). LCP-based multilayer boards processed with conventional drilling and plating processes show improved performance over other materials because they eliminate the surface flatness problems of glass or aramid reinforcements. Laser drilling of blind vias in the LCP dielectric provides a very high density for use in direct chip attach and area array packages. The material is ideally suited for MCM-L and PCMCIA applications fabricated with very thin dielectric layers of the liquid crystal polymer.

  20. Mechanism of the emergence of the photo-EMF upon silicon liquid crystal-single crystal contact

    Science.gov (United States)

    Budagov, K. M.; Guseinov, A. G.; Pashaev, B. G.

    2017-03-01

    The effect light has on a silicon liquid crystal-single crystal contact at different temperatures of the surface doping of silicon, and when BaTiO3 nanoparticles are added to the composition of a liquid crystal, is studied. The mechanism of the emergence of the photo-EMF in the liquid crystal-silicon structure is explained.

  1. Liquid crystal devices especially for use in liquid crystal point diffraction interferometer systems

    Science.gov (United States)

    Marshall, Kenneth L [Rochester, NY

    2009-02-17

    Liquid crystal point diffraction interferometer (LCPDI) systems that can provide real-time, phase-shifting interferograms that are useful in the characterization of static optical properties (wavefront aberrations, lensing, or wedge) in optical elements or dynamic, time-resolved events (temperature fluctuations and gradients, motion) in physical systems use improved LCPDI cells that employ a "structured" substrate or substrates in which the structural features are produced by thin film deposition or photo resist processing to provide a diffractive element that is an integral part of the cell substrate(s). The LC material used in the device may be doped with a "contrast-compensated" mixture of positive and negative dichroic dyes.

  2. Controllable light diffraction in woodpile photonic crystals filled with liquid crystal

    Energy Technology Data Exchange (ETDEWEB)

    Ho, Chih-Hua; Zeng, Hao; Wiersma, Diederik S. [European Laboratory for Non-Linear Spectroscopy (LENS), University of Florence, via Nello Carrara 1, 50019 Sesto Fiorentino (Italy); Cheng, Yu-Chieh; Maigyte, Lina; Trull, Jose; Cojocaru, Crina [Departament de Física i Enginyeria Nuclear, Universitat Politècnica de Catalunya, Colom 11, 08222 Terrassa (Spain); Staliunas, Kestutis [Departament de Física i Enginyeria Nuclear, Universitat Politècnica de Catalunya, Colom 11, 08222 Terrassa (Spain); Institucio Catalana de Reserca i Estudis Avançats (ICREA), passeig Lluis Companys 23, 08010 Barcelona (Spain)

    2015-01-12

    An approach to switching between different patterns of light beams transmitted through the woodpile photonic crystals filled with liquid crystals is proposed. The phase transition between the nematic and isotropic liquid crystal states leads to an observable variation of the spatial pattern transmitted through the photonic structure. The transmission profiles in the nematic phase also show polarization sensibility due to refractive index dependence on the field polarization. The experimental results are consistent with a numerical calculation by Finite Difference Time Domain method.

  3. Fabrication of flexible photonic crystal using alumina ball inserted Teflon tube

    Science.gov (United States)

    Watanabe, Yoshimi; Hotta, Takehiro; Sato, Hisashi

    2010-09-01

    In our previous paper, it was found that cotton yarn/TiO2-dispersed resin photonic crystals were fabricated successfully by applying textile technology. However, it is difficult to apply for practical use because these photonic crystals cannot change their shape flexibly. In this study, we fabricate the flexible photonic crystals using high-dielectric constant fibers. The high-dielectric constant fibers were made by inserting alumina balls into Teflon tubes. The crossed linear-fiber laminated fabric and multilayered woven fabric with an fcc lattice structure were structured by aligning high-dielectric constant fibers periodically. These photonic crystals consist of air and high-dielectric constant fibers. The attenuation of transmission amplitude through the photonic crystals was measured. The photonic crystal of crossed linear-fiber laminated fabric exhibits a forbidden gap in the range from 16 to 18 GHz range. On the other hand, the photonic crystal of multilayered woven fabric, which was fabricated by the same parameter with crossed linear-fiber laminated fabric, also exhibits a forbidden gap in the range from 13 to 16 GHz range. Thus, we can successfully fabricate flexible photonic crystals of woven fabric using high-dielectric constant fibers.

  4. NATO Advanced Research Workshop on Incommensurate Crystals, Liquid Crystals, and Quasi-Crystals

    CERN Document Server

    Clark, N

    1988-01-01

    In this NATO-sponsored Advanced Research Workshop we succeeded in bringing together approximately forty scientists working in the three main areas of structurally incommensurate materials: incommensurate crystals (primarily ferroelectric insulators), incommensurate liquid crystals, and metallic quasi-crystals. Although these three classes of materials are quite distinct, the commonality of the physics of the origin and descrip­ tion of these incommensurate structures is striking and evident in these proceedings. A measure of the success of this conference was the degree to which interaction among the three subgroups occurred; this was facili­ tated by approximately equal amounts of theory and experiment in the papers presented. We thank the University of Colorado for providing pleasant housing and conference facilities at a modest cost, and we are especially grate­ ful to Ann Underwood, who retyped all the manuscripts into camera-ready form. J. F. Scott Boulder, Colorado N. A. Clark v CONTENTS PART I: INCO...

  5. Fabrication of hybrid nanostructures by liquid plasma for biomedical applications

    Science.gov (United States)

    Ponraj, Sri Balaji; Dai, Xiujuan Jane; Li, Luhua; Chen, Zhiqiang; Surya Narayanan, Jayanth; Kanwar, Jagat; Du Plessis, Johan

    2013-09-01

    Liquid plasma, generated by a nanosecond pulsed generator at atmospheric pressure, was used to treat bamboo-like boron nitride nanotubes (BNNTs). It was observed that the length of the BNNTs was reduced and found more cup like structures called boron nitride nanocups (BNNCs). Interestingly, a new peak appeared at 406.86 eV in the N1s X-ray photoelectron spectrum, which seems to be attributable to the oxidation of nitrogen (N-O) in BNNTs. The C1s spectrum showed that oxygen functional groups were introduced onto the BNNT/BNNC surface. The liquid plasma was also used to assemble gold nanoparticles onto the treated BNNTs/BNNCs. This hybrid nanostructure was fabricated efficiently, compared with normal equilibrium conditions. The pH values and conductivity of all samples were measured. After plasma treatment, the pH values were greatly reduced and conductivity was significantly increased. We propose that the plasma acid, hydrogen peroxide, OH-, H ions and radicals formed in liquid plasma as well as the pulsed electric field contribute to the oxidation of nitrogen, reduced length of the BNNTs(forming BNNCs), surface functionalization, and to the fabrication of hybrid nanostructure. The cytotoxic tests for these hybrid nanostructures is underway. The authors acknowledge Rosey van Driel and Prabhukumar Sellamuthu for assisting with TEM and SEM, and the access of the XPS facility at RMIT University.

  6. Photopeak detection by an InSb radiation detector made of liquid phase epitaxially grown crystals

    Energy Technology Data Exchange (ETDEWEB)

    Sato, Yuki, E-mail: Y.Sato@nucleng.kyoto-u.ac.j [Graduate School of Engineering, Kyoto University, Sakyo, Kyoto 606-8501 (Japan); Morita, Yasunari; Harai, Tomoyuki; Kanno, Ikuo [Graduate School of Engineering, Kyoto University, Sakyo, Kyoto 606-8501 (Japan)

    2010-09-21

    We have fabricated a radiation detector using a p-type InSb crystal grown by liquid phase epitaxy (LPE). At temperatures below 100 K, the resistivity of the LPE crystal was over an order of magnitude higher than that of the commercial InSb crystal substrate. The resistance of the InSb detector is 680 k{Omega} at 4.2 K, which is one order of magnitude higher than that of detectors fabricated from commercial InSb wafers and, in an improvement over previous results, the energy resolution of {sup 241}Am alpha particles reaches 3%. In addition, we also observe the photopeak of gamma-rays emitted by {sup 133}Ba.

  7. Fluorinated azobenzenes for shape-persistent liquid crystal polymer networks

    NARCIS (Netherlands)

    Iamsaard, S.; Anger, E.; Asshoff, S.J.; Depauw, A.M.A.; Fletcher, S.P.; Katsonis, N.H.

    2016-01-01

    Liquid crystal polymer networks respond with an anisotropic deformation to a range of external stimuli. When doped with molecular photoswitches, these materials undergo complex shape modifications under illumination. As the deformations are reversed when irradiation stops, applications where the act

  8. Liquid crystal light valves for slow light and applications

    Energy Technology Data Exchange (ETDEWEB)

    Residori, S; Bortolozzo, U [INLN, CNRS, University de Nice Sophia-Antipolis, 1361 route des Lucioles, 06560 Valbonne (France); Huignard, J P, E-mail: jean-pierre.huignard@thalesgroup.co [Thales Research and Technology, RD 128 91767, Palaiseau Cedex (France)

    2010-02-01

    The large dispersive properties of wave mixing in liquid crystal light-valves allow obtaining fast and slow light with tunable group velocities. A slow light interferometer is shown by using this interaction.

  9. Visualization of Thin Liquid Crystal Bubbles in Microgravity

    Science.gov (United States)

    Park, C. S.; Clark, N. A.; Maclennan, J. E.; Glaser, M. A.; Tin, P.; Stannarius, R.; Hall, N.; Storck, J.; Sheehan, C.

    2015-01-01

    The Observation and Analysis of Smectic Islands in Space (OASIS) experiment exploits the unique characteristics of freely suspended liquid crystals in a microgravity environment to advance the understanding of fluid state physics.

  10. Field induced heliconical structure of cholesteric liquid crystal

    Science.gov (United States)

    Lavrentovich, Oleg D.; Shiyanovsii, Sergij V.; Xiang, Jie; Kim, Young-Ki

    2017-06-27

    A diffraction grating comprises a liquid crystal (LC) cell configured to apply an electric field through a cholesteric LC material that induces the cholesteric LC material into a heliconical state with an oblique helicoid director. The applied electric field produces diffracted light from the cholesteric LC material within the visible, infrared or ultraviolet. The axis of the heliconical state is in the plane of the liquid crystal cell or perpendicular to the plane, depending on the application. A color tuning device operates with a similar heliconical state liquid crystal material but with the heliconical director axis oriented perpendicular to the plane of the cell. A power generator varies the strength of the applied electric field to adjust the wavelength of light reflected from the cholesteric liquid crystal material within the visible, infrared or ultraviolet.

  11. Lyotropic hexagonal columnar liquid crystals of large colloidal gibbsite platelets

    NARCIS (Netherlands)

    Mourad, M.C.D.; Petukhov, A.V.; Vroege, G.J.; Lekkerkerker, H.N.W.

    2010-01-01

    We report the formation of hexagonal columnar liquid crystal phases in suspensions of large (570 nm diameter), sterically stabilized, colloidal gibbsite platelets in organic solvent. In thin cells these systems display strong iridescence originating from hexagonally arranged columns that are

  12. Liquid crystals: a new topic in physics for undergraduates

    CERN Document Server

    Pavlin, Jerneja; Cepic, Mojca

    2012-01-01

    The paper presents a teaching module about liquid crystals. Since liquid crystals are linked to everyday student experiences and are also a topic of a current scientific research, they are an excellent candidate of a modern topic to be introduced into education. We show that liquid crystals can provide a file rouge through several fields of physics such as thermodynamics, optics and electromagnetism. We discuss what students should learn about liquid crystals and what physical concepts they should know before considering them. In the presentation of the teaching module that consists of a lecture and experimental work in a chemistry and physics lab, we focus on experiments on phase transitions, polarization of light, double refraction and colours. A pilot evaluation of the module was performed among pre-service primary school teachers who have no special preference for natural sciences. The evaluation shows that the module is very efficient in transferring knowledge. A prior study showed that the informally ob...

  13. Improvement for the steering performance of liquid crystal phased array

    Institute of Scientific and Technical Information of China (English)

    SONG Yan; KONG Ling-jiang; CHEN Jun; ZHU Ying; YANG Jian-yu

    2009-01-01

    Optical phased array technology is introduced and the steering performances of liquid crystal phased array are discussed, several factors affecting the beam steering performances arc analyzed completely, also simple models for some typical factors are developed. Then, a new method based on iterating and modifying the output phase pattern of liquid crystal phase shifters is proposed. Using this method, the modified voltages applied on electrodes of liquid crystal phase shifters can be obtained, after applying the voltages, the influence of factors can be compensated to some extent; the steering angle accu-racy and efficiency with liquid crystal phased array can be improved. Through the simulation for the angle range from 0° to -1°, the error of steering angle can be reduced three orders of magnitude, and the efficiency can be increased almost 30% after several iterations.

  14. Phase Change Enthalpies and Entropies of Liquid Crystals

    National Research Council Canada - National Science Library

    Acree, William E; Chickos, James S

    2006-01-01

    .... A group additivity approach used to estimate total phase change entropies of organic molecules applied to 627 of these liquid crystals is found to significantly overestimate their total phase change entropies...

  15. Heterocyclic benzoxazole-based liquid crystals: Synthesis and mesomorphic properties

    Institute of Scientific and Technical Information of China (English)

    Sie Tiong Ha; Kok Leei Foo; Ramesh T. Subramaniam; Masato M. Ito; S. Sreehari Sastry; Siew Teng Ong

    2011-01-01

    New Schiff base liquid crystals containing benzoxazole core and alkanoyloxy chain at the end group of the molecules (Cn-1H2n-1COO-, n= 14,16,18) was synthesized. The present compounds are enantiotropic smectic A liquid crystals. It was also found that the end groups of the molecules and polar chloro substituent at the benzoxazole fragment had effect on the mesomorphic properties.

  16. Holographic Reversed-Mode Polymer-Stabilized Liquid Crystal Grating

    Institute of Scientific and Technical Information of China (English)

    MA Ji; SONG Jing; LIU Yong-Gang; RUAN Sheng-Ping; XUAN Li

    2005-01-01

    @@ We demonstrate the "reversed-mode" polymer-stabilized liquid crystal device. The incidence light goes through the film without the applied voltage and is diffracted with it. Because of relatively high liquid crystal percentage of 94%, the operating voltage of the device is less than 20 V. We explain this phenomenon using the molecularorientation model and the refractive index profile. The device can be used as display, optical switch, optical modulator and especially optical cross-connect deflector.

  17. Thermo optical study of nematic liquid crystal doped with ferrofluid

    Science.gov (United States)

    Jessy P., J.; Shalini, M.; Patel, Nainesh; Sarawade, Pradip; Radha, S.

    2017-05-01

    Liquid crystal composite materials with tunable physical properties are of great scientific interest because of optoelectronic and biomedical applications. We report our study of modified optical properties of 5CB Nematic Liquid Crystal (NLC) by doping with ferrofluid at low concentrations of 0.1% by the investigation of thermo optic behaviour. The observed sensitivity of optical response in ferrofluid doped NLC is expected to pave way for several thermo-optic applications.

  18. Photorefractivity in polymer-stabilized nematic liquid crystals

    Energy Technology Data Exchange (ETDEWEB)

    Wiederrecht, G.P. [Argonne National Lab., IL (United States). Chemistry Div.; Wasielewski, M.R. [Argonne National Lab., IL (United States). Chemistry Div.]|[Northwestern Univ., Evanston, IL (United States). Dept. of Chemistry

    1998-07-01

    Polymer-stabilized liquid crystals, consisting of low concentrations of a polymeric electron acceptor, are shown to exhibit significantly enhanced photorefractive properties. The charge generation and transport properties of these composite systems are strongly modified from nematic liquid crystals doped with electron donors and acceptors. The new composites are produced by polymerizing a small quantity of a 1,4:5,8-naphthalenediimide electron acceptor functionalized with an acrylate group in an aligned nematic liquid crystal. Photopolymerization creates an anisotropic gel-like medium in which the liquid crystal is free to reorient in the presence of a space charge field, while maintaining charge trapping sites in the polymerized regions of the material. The presence of these trapping sites results in the observation of longer lived, higher resolution holographic gratings in the polymer-stabilized liquid crystals than observed in nematic liquid crystals alone. These gratings display Bragg regime diffraction. Asymmetric beam coupling, photo-conductivity, and four-wave mixing experiments are performed to characterize the photophysics of these novel materials.

  19. Liquid crystals: a new topic in physics for undergraduates

    Science.gov (United States)

    Pavlin, Jerneja; Vaupotič, Nataša; Čepič, Mojca

    2013-05-01

    This paper presents a teaching module about liquid crystals. Since liquid crystals are linked to everyday student experiences and are also a topic of current scientific research, they are an excellent candidate for a modern topic to be introduced into education. We show that liquid crystals can provide a pathway through several fields of physics such as thermodynamics, optics and electromagnetism. We discuss what students should learn about liquid crystals and what physical concepts they should know before considering them. In the presentation of the teaching module, which consists of a lecture and experimental work in a chemistry and physics laboratory, we focus on experiments on phase transitions, polarization of light, double refraction and colours. A pilot evaluation of the module was performed among pre-service primary school teachers who have no special preference for natural sciences. The evaluation shows that the module is very efficient in transferring knowledge. A prior study showed that the informally obtained pre-knowledge on liquid crystals of the first-year students from several different fields of study was negligible. Since social science students are the least interested in natural sciences, it can be expected that students in any study programme will on average achieve at least as good qualitative knowledge of phenomena related to liquid crystals as the group involved in the pilot study.

  20. Lyotropic chromonic liquid crystals: From viscoelastic properties to living liquid crystals

    Science.gov (United States)

    Zhou, Shuang

    Lyotropic chromonic liquid crystal (LCLC) represents a broad range of molecules, from organic dyes and drugs to DNA, that self-assemble into linear aggregates in water through face-to-face stacking. These linear aggregates of high aspect ratio are capable of orientational order, forming, for example nematic phase. Since the microscopic properties (such as length) of the chromonic aggregates are results of subtle balance between energy and entropy, the macroscopic viscoelastic properties of the nematic media are sensitive to change of external factors. In the first part of this thesis, by using dynamic light scattering and magnetic Frederiks transition techniques, we study the Frank elastic moduli and viscosity coefficients of LCLC disodium cromoglycate (DSCG) and sunset yellow (SSY) as functions of concentration c , temperature T and ionic contents. The elastic moduli of splay (K1) and bend (K3) are in the order of 10pN, about 10 times larger than the twist modulus (K2). The splay modulus K1 and the ratio K1/K3 both increase substantially as T decreases or c increases, which we attribute to the elongation of linear aggregates at lower T or higher c . The bend viscosity is comparable to that of thermotropic liquid crystals, while the splay and twist viscosities are several orders of magnitude larger, changing exponentially with T . Additional ionic additives into the system influence the viscoelastic properties of these systems in a dramatic and versatile way. For example, monovalent salt NaCl decreases bend modulus K3 and increases twist viscosity, while an elevated pH decreases all the parameters. We attribute these features to the ion-induced changes in length and flexibility of building units of LCLC, the chromonic aggregates, a property not found in conventional thermotropic and lyotropic liquid crystals form by covalently bound units of fixed length. The second part of the thesis studies a new active bio-mechanical hybrid system called living liquid crystal

  1. Thermally Driven Photonic Actuator Based on Silica Opal Photonic Crystal with Liquid Crystal Elastomer.

    Science.gov (United States)

    Xing, Huihui; Li, Jun; Shi, Yang; Guo, Jinbao; Wei, Jie

    2016-04-13

    We have developed a novel thermoresponsive photonic actuator based on three-dimensional SiO2 opal photonic crystals (PCs) together with liquid crystal elastomers (LCEs). In the process of fabrication of such a photonic actuator, the LCE precursor is infiltrated into the SiO2 opal PC followed by UV light-induced photopolymerization, thereby forming the SiO2 opal PC/LCE composite film with a bilayer structure. We find that this bilayer composite film simultaneously exhibits actuation behavior as well as the photonic band gap (PBG) response to external temperature variation. When the SiO2 opal PC/LCE composite film is heated, it exhibits a considerable bending deformation, and its PBG shifts to a shorter wavelength at the same time. In addition, this actuation is quite fast, reversible, and highly repeatable. The thermoresponsive behavior of the SiO2 opal PC/LCE composite films mainly derives from the thermal-driven change of nematic order of the LCE layer which leads to the asymmetric shrinkage/expansion of the bilayer structure. These results will be of interest in designing optical actuator systems for environment-temperature detection.

  2. Influence of surfactant tail branching and organization on the orientation of liquid crystals at aqueous-liquid crystal interfaces.

    Science.gov (United States)

    Lockwood, Nathan A; de Pablo, Juan J; Abbott, Nicholas L

    2005-07-19

    We have examined the influence of two aspects of surfactant structure--tail branching and tail organization--on the orientational ordering (so-called anchoring) of water-immiscible, thermotropic liquid crystals in contact with aqueous surfactant solutions. First, we evaluated the influence of branches in surfactant tails on the anchoring of nematic liquid crystals at water-liquid crystal interfaces. We compared interfaces that were laden with one of three linear surfactants (sodium dodecyl sulfate, sodium dodecanesulfonate, and isomerically pure linear sodium dodecylbenzenesulfonate) to interfaces laden with branched sodium dodecylbenzenesulfonate. We carried out these experiments at 60 degrees C, above the Krafft temperatures of all the surfactants studied, and used the liquid crystal TL205 (a mixture of cyclohexane-fluorinated biphenyls and fluorinated terphenyls), which forms a nematic phase at 60 degrees C. Linear surfactants caused TL205 to assume a perpendicular orientation (homeotropic anchoring) above a threshold concentration of surfactant and parallel orientation (planar anchoring) at lower concentrations. In contrast, branched sodium dodecylbenzenesulfonate caused planar anchoring of TL205 at all concentrations up to the critical micelle concentration of the surfactant. Second, we used sodium dodecanesulfonate and a commercial linear sodium dodecylbenzenesulfonate to probe the influence of surfactant tail organization on the orientations of liquid crystals at water-liquid crystal interfaces. Commercial linear sodium dodecylbenzenesulfonate, which comprises a mixture of ortho and para isomers, has been previously characterized to form less ordered monolayers than sodium dodecanesulfonate at oil-water interfaces at room temperature. We found sodium dodecanesulfonate to cause homeotropic anchoring of both TL205 and 4'-pentyl-4-cyanobiphenyl (5CB, nematic at room temperature), whereas commercial linear sodium dodecylbenzenesulfonate caused predominantly

  3. Do protein crystals nucleate within dense liquid clusters?

    Science.gov (United States)

    Maes, Dominique; Vorontsova, Maria A; Potenza, Marco A C; Sanvito, Tiziano; Sleutel, Mike; Giglio, Marzio; Vekilov, Peter G

    2015-07-01

    Protein-dense liquid clusters are regions of high protein concentration that have been observed in solutions of several proteins. The typical cluster size varies from several tens to several hundreds of nanometres and their volume fraction remains below 10(-3) of the solution. According to the two-step mechanism of nucleation, the protein-rich clusters serve as locations for and precursors to the nucleation of protein crystals. While the two-step mechanism explained several unusual features of protein crystal nucleation kinetics, a direct observation of its validity for protein crystals has been lacking. Here, two independent observations of crystal nucleation with the proteins lysozyme and glucose isomerase are discussed. Firstly, the evolutions of the protein-rich clusters and nucleating crystals were characterized simultaneously by dynamic light scattering (DLS) and confocal depolarized dynamic light scattering (cDDLS), respectively. It is demonstrated that protein crystals appear following a significant delay after cluster formation. The cDDLS correlation functions follow a Gaussian decay, indicative of nondiffusive motion. A possible explanation is that the crystals are contained inside large clusters and are driven by the elasticity of the cluster surface. Secondly, depolarized oblique illumination dark-field microscopy reveals the evolution from liquid clusters without crystals to newly nucleated crystals contained in the clusters to grown crystals freely diffusing in the solution. Collectively, the observations indicate that the protein-rich clusters in lysozyme and glucose isomerase solutions are locations for crystal nucleation.

  4. Nanoscale investigations on interchain organization in thin films of polymer-liquid crystal blend

    Science.gov (United States)

    Villeneuve-Faure, C.; Le Borgne, D.; Ventalon, V.; Seguy, I.; Moineau-Chane Ching, K. I.; Bedel-Pereira, E.

    2017-07-01

    Optimized nanomorphology in organic thin active layers is crucial for good performance in organic solar cells. However, the relation between morphology and electronic properties at nanoscale remains not completely understood. Here, we study the effect of film thickness and temperature annealing on the ordering of poly(3-hexylthiophene) chains when the polymer is blended with a columnar liquid crystalline molecule. Electronic absorption, atomic force microscopy measurements, and Raman spectroscopy show that morphology and chain ordering of the blend depend on the film thickness. We highlight the benefit of using a liquid crystal in organic blends, opening the way to use simple processing methods for the fabrication of organic electronic devices.

  5. Fullerene solar cells with cholesteric liquid crystal doping

    Science.gov (United States)

    Jiang, Lulu; Jiang, Yurong; Zhang, Congcong; Chen, Zezhang; Qin, Ruiping; Ma, Heng

    2016-09-01

    This paper reports the doping effect of cholesteric liquid crystal 3β-Hydroxy-5-cholestene 3-oleate on polymer solar cells composed of the poly 3-hexyl thiophene and the fullerene derivative. With a doping ratio of 0.3 wt%, the device achieves an ideal improvement on the shunt resistor and the fill factor. Compared with the reference cell, the power conversion efficiency of the doped cell is improved 24%. The photoelectric measurement and the active layer characterization indicate that the self-assembly liquid crystal can improve the film crystallization and reduce the membrane defect. Project supported by the National Natural Science Foundation of China (Grant No. 61540016).

  6. The Liquid Crystal State Poliamidbenzimidazola Solutions in Sulfuric Acid

    Directory of Open Access Journals (Sweden)

    Khanchich Oleg

    2017-01-01

    Full Text Available We studied the temperature and concentration conditions of education and the field of LC – phase of existence in sulfuric acid solutions poliamidbenzimidazola. The polarization–optical methods and the structural features of biphasic and anisotropic areas and built plots the phase diagram of the concentrated solutions poliamidbenzimidazola in H2SO4. It is shown that in certain temperature – concentration of cooling modes can be observed the coexistence of three phases: isotropic crystal and a liquid crystal, which is shown as a characteristic of liquid crystal birefringent domains.

  7. Thin liquid sample fabrication for neutron resonance spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Noguere, G. [CEA Cadarache, F-13108 Saint Paul les Durance (France)], E-mail: gilles.noguere@cea.fr; Brusegan, A. [EC-JRC-IRMM, B-2440 Geel (Belgium); Lepretre, A. [CEA Saclay, F-91191 Gif sur Yvette (France); Lombard, T.; Lupo, J. [EC-JRC-IRMM, B-2440 Geel (Belgium)

    2008-03-11

    In neutron resonance spectroscopy, preparation of thin cylindrical samples of large diameter containing 10{sup -4}-10{sup -5} atoms per barn of raw materials in powder form make pressing a uniform thickness sample difficult. The use of liquid samples is a suitable alternative to overcome the technical limits inherent to the fabrication of pressed solid samples by compaction methods. This paper presents the fabrication of a 2 mm thick cylindrical sample, with a inner diameter of 65 mm, filled with an aqueous solution of lithium iodide. The sample was designed to measure the low neutron energy range of the {sup 127}I total cross-section by means of the neutron resonance transmission technique. The resonance shape analysis provided results consistent with those obtained by measuring a 17.5 mm thick lead iodine sample under the same experimental conditions as for LiI sample. Such liquid sample could be used to repeat similar measurements on a large variety of stable isotopes and low radioactive materials.

  8. Inorganic nanosheet liquid crystals and their applications (Conference Presentation)

    Science.gov (United States)

    Miyamoto, Nobuyoshi

    2016-09-01

    Liquid crystal (LC) phase of inorganic nanosheets is fascinating system in the field of condensed matter physics and for potential applications in many fields. In this lecture, I present my research on the LC nanosheet colloids derived from clay minerals, layered niobates, layered titnates, and layered perovskites. Structural analyses by small angle X-ray scattering and confocal laser scanning microscopy reveals not only meso-scale lamellar or nematic structures in the LC phase but also fractal-like porous structures. In that structure, the nanosheets show translational and rotational Brownian motions as revealed by fast-scanning confocal microscopy. The structure is tunable by many factors such as nanosheet concentration, nanosheet lateral size, salt concentration, solvent, counter cations, and charge density of the nanosheets. Some optimized systems show variable structural colors which will be useful for color materials and sensor devices. Under ac-electric field, the orientation of the nanosheets and LC domain is easily controllable; the electric field response is applicable for fabrication of electro-optic devices and formation of anisotropic composite materials. Among many future applications, inorganic nanosheet/ polymer composites with precisely controllable hierarchical structure are fascinating. We synthesized a cm-scale mono-domain gel of exfoliated LC clay/polymer composite. The gel is printable with a dye and the colored part shows photo-induced anomalous deformation behavior, which will be applicable as chemical actuators.

  9. Discotic liquid crystals: a new generation of organic semiconductors.

    Science.gov (United States)

    Sergeyev, Sergey; Pisula, Wojciech; Geerts, Yves Henri

    2007-12-01

    Discotic (disc-like) molecules typically comprising a rigid aromatic core and flexible peripheral chains have been attracting growing interest because of their fundamental importance as model systems for the study of charge and energy transport and due to the possibilities of their application in organic electronic devices. This critical review covers various aspects of recent research on discotic liquid crystals, in particular, molecular design concepts, supramolecular structure, processing into ordered thin films and fabrication of electronic devices. The chemical structure of the conjugated core of discotic molecules governs, to a large extent, their intramolecular electronic properties. Variation of the peripheral flexible chains and of the aromatic core is decisive for the tuning of self-assembly in solution and in bulk. Supramolecular organization of discotic molecules can be effectively controlled by the choice of the processing methods. In particular, approaches to obtain suitable macroscopic orientations of columnar superstructures on surfaces, that is, planar uniaxial or homeotropic alignment, are discussed together with appropriate processing techniques. Finally, an overview of charge transport in discotic materials and their application in optoelectronic devices is given.

  10. Quantum Dot/Liquid Crystal Nanocomposites in Photonic Devices

    Directory of Open Access Journals (Sweden)

    Andrea L. Rodarte

    2015-07-01

    Full Text Available Quantum dot/liquid crystal nano-composites are promising new materials for a variety of applications in energy harvesting, displays and photonics including the liquid crystal laser. To realize many applications, however, we need to control and stabilize nano-particle dispersion in different liquid crystal host phases and understand how the particles behave in an anisotropic fluid. An ideal system will allow for the controlled assembly of either well-defined nano-particle clusters or a uniform particle distribution. In this paper, we investigate mesogen-functionalized quantum dots for dispersion in cholesteric liquid crystal. These nanoparticles are known to assemble into dense stable packings in the nematic phase, and such structures, when localized in the liquid crystal defects, can potentially enhance the coupling between particles and a cholesteric cavity. Controlling the dispersion and assembly of quantum dots using mesogenic surface ligands, we demonstrate how resonant fluid photonic cavities can result from the co-assembly of luminescent nanoparticles in the presence of cholesteric liquid crystalline ordering.

  11. Liquid crystals based sensing platform-technological aspects.

    Science.gov (United States)

    Hussain, Zakir; Qazi, Farah; Ahmed, Muhammad Imran; Usman, Adil; Riaz, Asim; Abbasi, Amna Didar

    2016-11-15

    In bulk phase, liquid crystalline molecules are organized due to non-covalent interactions and due to delicate nature of the present forces; this organization can easily be disrupted by any small external stimuli. This delicate nature of force balance in liquid crystals organization forms the basis of Liquid-crystals based sensing scheme which has been exploited by many researchers for the optical visualization and sensing of many biological interactions as well as detection of number of analytes. In this review, we present not only an overview of the state of the art in liquid crystals based sensing scheme but also highlight its limitations. The approaches described below revolve around possibilities and limitations of key components of such sensing platform including bottom substrates, alignments layers, nature and type of liquid crystals, sensing compartments, various interfaces etc. This review also highlights potential materials to not only improve performance of the sensing scheme but also to bridge the gap between science and technology of liquid crystals based sensing scheme.

  12. Tuning light focusing with liquid crystal infiltrated graded index photonic crystals

    Science.gov (United States)

    Rezaei, B.; Giden, I. H.; Kurt, H.

    2017-01-01

    We perform numerical analyses of tunable graded index photonic crystals based on liquid crystals. Light manipulation with such a photonic medium is explored and a new approach for active tuning of the focal distance is proposed. The graded index photonic crystal is realized using the symmetry reduced unit element in two-dimensional photonic crystals without modifying the dielectric filling fraction or cell size dimensions. By applying an external static electric field to liquid crystals, their refractive indices and thus, the effective refractive index of the whole graded index photonic crystal will be changed. Setting the lattice constant to a=400 nm yields a tuning of 680 nm for focal point position. This property can be used for designing an electro-optic graded index photonic crystal-based flat lens with a tunable focal point. Future optical systems may have benefit from such tunable graded index lenses.

  13. Driving voltage properties sensitive to microscale liquid crystal orientation pattern in twisted nematic liquid crystal cells

    Science.gov (United States)

    Honma, Michinori; Takahashi, Koki; Yamaguchi, Rumiko; Nose, Toshiaki

    2016-04-01

    We investigated the micropattern-sensitive driving voltage properties of twisted nematic liquid crystal (LC) cells and found that the threshold voltage for inducing the Fréedericksz transition strongly depends on the micropatterned LC molecular orientation state. We discuss the effects of various cell parameters such as the period of the micropattern Λ, the LC layer thickness d, and the twist angle Φ on the threshold voltage. By a computer simulation of the LC molecular orientation, we found that the threshold voltage V th varies in response to the deformation factor Δ (= d 2/Λ2 + Φ2/π2) of the spatially distributed LC molecular orientation. We confirm that V\\text{th}2 is proportional to 1 - Δ from both theoretical and experimental standpoints.

  14. Performance optimization of optical switches in ferroelectric liquid crystals and polymers operating at 1550 nm

    Science.gov (United States)

    Asquini, Rita; Gizzi, Claudio; Beccherelli, Romeo; d'Alessandro, Antonio

    2004-01-01

    A multilayer structure realizing an optical switch with ferroelectric liquid crystal, polymeric buffers and waveguides has been analyzed at the wavelength of 1550 nm, focusing on fabrication and design tolerances. The used liquid crystal FELIX-M4851-025 from Clariant is aligned by Nylon6 and embedded between two polymeric waveguides. ITO is deposited on quartz substrates to apply voltage to the cell and polymeric buffers are employed to reduce ITO absorption losses. The polymers consisted of poly(pentafluorostyrene-co-glycidyl methacrylate). Light is switched between the optical waveguides by reorienting the liquid crystal. Optimization in terms of optical losses and extinction ratios was carried out by varying layer thicknesses, refractive indices of waveguides and buffers, and the angle α between the normal to the smectic layers and the propagation direction. An optimized device with α = 51°, refractive indices of 1.475 and 1.462, thicknesses of 3 and 6 μm for waveguides and buffer, respectively and 4.4 μm for the liquid crystal layer, exhibits an extinction ratio of 59.6 dB with losses as low as 0.8 dB for a length of only 174 μm. A device design using single mode channel waveguides for optical switching matrices has been also carried out.

  15. Switchable liquid crystal contact lenses: dynamic vision for the ageing eye

    Science.gov (United States)

    Milton, Harry E.; Gleeson, Helen F.; Morgan, Philip B.; Goodby, John W.; Cowling, Stephen; Clamp, John H.

    2014-02-01

    The inability of the eye to focus on nearby objects, presbyopia, is suffered by ~100% of people over the age of 50. Liquid crystal (LC) spectacle lenses have shown great potential for correcting presbyopia. However, correcting presbyopia in contact lens users has proven elusive and existing commercial options suffer significant compromises in vision and comfort. We describe a novel contact lens that includes a liquid crystal element that offers to correct presbyopia without the compromises associated with other technologies. We fabricated variable focus lenses using a balanced optical system, providing the additional optical power presbyopes require for near vision (typically +1.00 D to +2.00 D). The system uses positive optical power from the two substrates and variable negative optical power from the LC layer to form a balanced optical system which, when unpowered, corrects distance vision. Upon voltage application, the liquid crystal layer decreases in refractive index, resulting in additional optical power in the system, offering correction equivalent to reading glasses. Our new technology is based on a traditional contact lens material which could be placed directly on the eye. The liquid crystal lens employed is well suited to the small optical areas associated with contact lenses. We compare several different LC materials and geometries which are suitable for our application, and discuss the influence of material and geometry on switching times, optical quality and operating voltage. Our contact lenses typically switch +/-2.00D in response to < 10 Vrms with response times of the order of a second.

  16. Supramolecular [60]fullerene liquid crystals formed by self-organized two-dimensional crystals.

    Science.gov (United States)

    Zhang, Xiaoyan; Hsu, Chih-Hao; Ren, Xiangkui; Gu, Yan; Song, Bo; Sun, Hao-Jan; Yang, Shuang; Chen, Erqiang; Tu, Yingfeng; Li, Xiaohong; Yang, Xiaoming; Li, Yaowen; Zhu, Xiulin

    2015-01-02

    Fullerene-based liquid crystalline materials have both the excellent optical and electrical properties of fullerene and the self-organization and external-field-responsive properties of liquid crystals (LCs). Herein, we demonstrate a new family of thermotropic [60]fullerene supramolecular LCs with hierarchical structures. The [60]fullerene dyads undergo self-organization driven by π-π interactions to form triple-layer two-dimensional (2D) fullerene crystals sandwiched between layers of alkyl chains. The lamellar packing of 2D crystals gives rise to the formation of supramolecular LCs. This design strategy should be applicable to other molecules and lead to an enlarged family of 2D crystals and supramolecular liquid crystals.

  17. Photonics of liquid-crystal structures: A review

    Energy Technology Data Exchange (ETDEWEB)

    Palto, S. P., E-mail: palto@online.ru; Blinov, L. M.; Barnik, M. I.; Lazarev, V. V.; Umanskii, B. A.; Shtykov, N. M. [Russian Academy of Sciences, Shubnikov Institute of Crystallography (Russian Federation)

    2011-07-15

    The original results of studies of the electro-optical and laser effects which have been performed at the Laboratory of Liquid Crystals of the Institute of Crystallography, Russian Academy of Sciences, over the last few years are reviewed. Cholesteric liquid crystals as vivid representatives of photonic structures and their behavior in an electric field are considered in detail. The formation of higher harmonics in the periodic distribution of the director field in a helical liquid crystal structure and, correspondingly, the new (anharmonic) mode of electro-optical effects are discussed. Another group of studies is devoted to bistable light switching by an electric field in chiral nematics. Polarization diffraction gratings controlled by an electric field are also considered. The results of studies devoted to microlasers on various photonic structures with cholesteric and nematic liquid crystals are considered in detail. Particular attention is given to the new regime: leaky-mode lasing. Designs of liquid crystal light amplifiers and their polarization, field, and spectral characteristics are considered in the last section.

  18. Acoustic waves in compressible planar layered smectic liquid crystals

    Science.gov (United States)

    Walker, A. J.; Stewart, I. W.

    2010-08-01

    A dynamic theory for compressible smectic C (SmC) liquid crystals is postulated following previous work by Leslie et al (1991 Mol. Cryst. Liq. Cryst. 198 443-54), Nakagawa (1996 J. Phys. Soc. Japan 65 100-6 2004 J. Non-Newtonian Fluid Mech. 119 123-9) and de Gennes and Prost (1993 The Physics of Liquid Crystals 2nd edn (Oxford: Oxford University Press)). This theory is then implemented with a constructed bulk elastic energy and asymmetric stress tensor to describe a system of planar layered SmC liquid crystals undergoing various modes of undulation. We show that previous work on smectic A (SmA) liquid crystals by de Gennes and Prost (1993 The Physics of Liquid Crystals 2nd edn (Oxford: Oxford University Press)) can be expanded for SmC and consolidated. Novel and confirming estimates for SmC material parameter values are produced by considering the dependence of the system on these parameters.

  19. Graphene-based liquid-crystal microlens arrays for synthetic-aperture imaging

    Science.gov (United States)

    Wu, Yong; Hu, Wei; Tong, Qing; Lei, Yu; Xin, Zhaowei; Wei, Dong; Zhang, Xinyu; Liao, Jing; Wang, Haiwei; Xie, Changsheng

    2017-09-01

    In this paper, a new kind of liquid-crystal microlens array with graphene electrodes controlled electrically are designed and fabricated successfully. The graphene-based liquid-crystal microlens arrays (GLCMAs) exhibit excellent beam focusing performances in both the visible and near infrared (NIR) wavelength regions and also synthetic aperture imaging function. The graphene films used to fabricate the electrodes of the GLCMAs are grown by chemical vapor deposition over copper foils, demonstrating several characters of low sheet resistance and high transmittance in both wavelength ranges above. The key processes for shaping the GLCMAs include: transferring graphene films from copper foils to wafers selected, conventional UV-photolithography, ICP etching, and liquid-crystal encapsulation. Through performing common optical measurements, the point spread functions of incident lasers with different wavelength, such as red lasers of ∼600 nm, green lasers of ∼532 nm, and NIR lasers of ∼980 nm, have been obtained. Several key parameters including focal spots size, average normalized light intensity, focal length, average deviation rate and contrast ratio have been acquired and analyzed. A particular synthetic-aperture imaging based on the GLCMA is realized so as to certify a fact that a single target pattern can be constructed effectively based on some sub-aperture patterns with several tens or hundreds of micrometer scale, and thus highlight a way to fast process partial or small-zoned patterns for enhancing the detection efficiency of special targets.

  20. Effect of an ionic liquid on vancomycin crystallization

    Energy Technology Data Exchange (ETDEWEB)

    Ha, Geon Soo; Kim, Jin-Hyun [Kongju National University, Cheonan (Korea, Republic of)

    2015-04-15

    We first developed a vancomycin crystallization process using an ionic liquid (IL) and improved the crystallization efficiency by optimization of crystallization conditions (pH, conductivity, solution of distilled water and IL/acetone ratio, crystallization temperature, IL concentration). We also investigated the effect of major process parameters on crystallization, using an electron microscope, and identified morphology by XRD analysis. Using ILs (1-butyl-3- methylimidazolium tetrafluoroborate ([BMIm][BF{sub 4}]), 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIm] [PF6])), vancomycin crystals were successfully formed under the optimal crystallization conditions: pH 4.5; conductivity, 10 mS/cm; solution of distilled water and IL/acetone ratio, 1 : 3.5 (v/v); crystallization temperature, 10 .deg. C; IL concentration, 20% (v/v). When using an IL ([BMIm][BF{sub 4}]), the time required for crystallization in the existing crystallization methods (⁓24 hr) was dramatically decreased (⁓9 hr) and high-quality vancomycin crystals were successfully formed.

  1. On-chip tunable long-period gratings in liquid crystal infiltrated photonic crystal fibers

    DEFF Research Database (Denmark)

    Wei, Lei; Weirich, Johannes; Alkeskjold, Thomas Tanggaard;

    2009-01-01

    An on-chip tunable long-period grating device in a liquid crystal infiltrated photonic crystal fiber is experimentally demonstrated. The depth and position of the notch are tuned electrically and thermally. The transmission axis can be electrically controlled as well as switched on and off....

  2. Theoretical analysis of a biased photonic crystal fiber infiltrated with a negative dielectric anisotropy liquid crystal

    DEFF Research Database (Denmark)

    Weirich, Johannes; Wei, Lei; Lægsgaard, Jesper;

    2009-01-01

    We simulate the PBG mode of a biased Photonic Crystal Fiber (PCF) infiltrated with a Liquid Crystal (LC) with negative dielectric anisotropy. We analyse the voltage induced change of the transmission spectrum, dispersion and losses and compare them to the experimental values....

  3. Transverse wave propagation in photonic crystal based on holographic polymer-dispersed liquid crystal.

    Science.gov (United States)

    Fuh, Andy Ying-Guey; Li, Ming Shian; Wu, Shing Trong

    2011-07-04

    This study investigates the transversely propagating waves in a body-centered tetragonal photonic crystal based on a holographic polymer-dispersed liquid crystal film. Rotating the film reveals three different transverse propagating waves. Degeneracy of optical Bloch waves from reciprocal lattice vectors explains their symmetrical distribution.

  4. Optical tuning of photonic bandgaps in dye-doped nematic liquid crystal photonic crystal fibers

    DEFF Research Database (Denmark)

    Alkeskjold, Thomas Tanggaard; Bjarklev, Anders Overgaard; Hermann, David Sparre;

    2005-01-01

    An all-optical modulator is demonstrated, which utilizes a pulsed 532 nm laser to modulate the spectral position of the bandgaps in a photonic crystal fiber infiltrated with a dye-doped nematic liquid crystal. In order to investigate the time response of the LCPBG fiber device, a low-power CW probe...

  5. Nematic-like stable glasses without equilibrium liquid crystal phases.

    Science.gov (United States)

    Gómez, Jaritza; Gujral, Ankit; Huang, Chengbin; Bishop, Camille; Yu, Lian; Ediger, M D

    2017-02-07

    We report the thermal and structural properties of glasses of posaconazole, a rod-like molecule, prepared using physical vapor deposition (PVD). PVD glasses of posaconazole can show substantial molecular orientation depending upon the choice of substrate temperature, Tsubstrate, during deposition. Ellipsometry and IR measurements indicate that glasses prepared at Tsubstrate very near the glass transition temperature (Tg) are highly ordered. For these posaconazole glasses, the orientation order parameter is similar to that observed in macroscopically aligned nematic liquid crystals, indicating that the molecules are mostly parallel to one another and perpendicular to the interface. To our knowledge, these are the most anisotropic glasses ever prepared by PVD from a molecule that does not form equilibrium liquid crystal phases. These results are consistent with a previously proposed mechanism in which molecular orientation in PVD glasses is inherited from the orientation present at the free surface of the equilibrium liquid. This mechanism suggests that molecular orientation at the surface of the equilibrium liquid of posaconazole is nematic-like. Posaconazole glasses can show very high kinetic stability; the isothermal transformation of a 400 nm glass into the supercooled liquid occurs via a propagating front that originates at the free surface and requires ∼10(5) times the structural relaxation time of the liquid (τα). We also studied the kinetic stability of PVD glasses of itraconazole, which is a structurally similar molecule with equilibrium liquid crystal phases. While itraconazole glasses can be even more anisotropic than posaconazole glasses, they exhibit lower kinetic stability.

  6. Thin aligned organic polymer films for liquid crystal devices

    CERN Document Server

    Foster, K E

    1997-01-01

    This project was designed to investigate the possibility of producing alignment layers for liquid crystal devices by cross-linking thin films containing anisotropic polymer bound chromophores via irradiation with polarised ultraviolet light. Photocross-linkable polymers find use in microelectronics, liquid crystal displays, printing and UV curable lacquers and inks; so there is an increasing incentive for the development of new varieties of photopolymers in general. The synthesis and characterisation of two new photopolymers that are suitable as potential alignment layers for liquid crystal devices are reported in this thesis. The first polymer contains the anthracene chromophore attached via a spacer unit to a methacrylate backbone and the second used a similarly attached aryl azide group. Copolymers of the new monomers with methyl methacrylate were investigated to establish reactivity ratios in order to understand composition drift during polymerisation.

  7. Relaxation Dynamics of Ferroelectric Liquid Crystals in Pulsed Electric Field

    Science.gov (United States)

    Kudreyko, A. A.; Migranov, N. G.; Migranova, D. N.

    2016-11-01

    In this contribution we report a theoretical study of relaxation processes in surface-stabilized ferroelectric liquid crystals with spontaneous polarization. The influence of pulsed electric field on the behavior of ferroelectric liquid crystal in the SmC* phase, which is placed in a thin cell with strong anchoring of SmC* molecules with the boundary substrate, is studied. In the vicinity of the substrate interface, temporal dependence of the azimuthal motion of the director induced by electric field is obtained. The response to the external distortion of ferroelectric liquid crystal confined between two microstructured substrates is the occurrence of periodic temporal formation of solitons connected with the distortion of the director field n in the sample bulk. The interplay between microstructured substrates and director distribution of the ferroelectric SmC* phase is explained by the Frenkel-Kontorova model for a chain of atoms, but adapted for the continuum problem.

  8. Segregation of liquid crystal mixtures in topological defects

    Science.gov (United States)

    Rahimi, Mohammad; Ramezani-Dakhel, Hadi; Zhang, Rui; Ramirez-Hernandez, Abelardo; Abbott, Nicholas L.; de Pablo, Juan J.

    2017-04-01

    The structure and physical properties of liquid crystal (LC) mixtures are a function of composition, and small changes can have pronounced effects on observables, such as phase-transition temperatures. Traditionally, LC mixtures have been assumed to be compositionally homogenous. The results of chemically detailed simulations presented here show that this is not the case; pronounced deviations of the local order from that observed in the bulk at defects and interfaces lead to significant compositional segregation effects. More specifically, two disclination lines are stabilized in this work by introducing into a nematic liquid crystal mixture a cylindrical body that exhibits perpendicular anchoring. It is found that the local composition deviates considerably from that of the bulk at the interface with the cylinder and in the defects, thereby suggesting new assembly and synthetic strategies that may capitalize on the unusual molecular environment provided by liquid crystal mixtures.

  9. Defect topologies in chiral liquid crystals confined to mesoscopic channels.

    Science.gov (United States)

    Schlotthauer, Sergej; Skutnik, Robert A; Stieger, Tillmann; Schoen, Martin

    2015-05-21

    We present Monte Carlo simulations in the grand canonical and canonical ensembles of a chiral liquid crystal confined to mesochannels of variable sizes and geometries. The mesochannels are taken to be quasi-infinite in one dimension but finite in the two other directions. Under thermodynamic conditions chosen and for a selected value of the chirality coupling constant, the bulk liquid crystal exhibits structural characteristics of a blue phase II. This is established through the tetrahedral symmetry of disclination lines and the characteristic simple-cubic arrangement of double-twist helices formed by the liquid-crystal molecules along all three axes of a Cartesian coordinate system. If the blue phase II is then exposed to confinement, the interplay between its helical structure, various anchoring conditions at the walls of the mesochannels, and the shape of the mesochannels gives rise to a broad variety of novel, qualitative disclination-line structures that are reported here for the first time.

  10. Anomalous Crystallization as a Signature of the Fragile-to-Strong Transition in Metallic Glass-Forming Liquids

    DEFF Research Database (Denmark)

    Yang, X.N.; Zhou, C.; Sun, Q.J.;

    2014-01-01

    We study the fragile-to-strong (F−S) transition of metallic glass-forming liquids (MGFLs) by measuring the thermal response during annealing and dynamic heating of La55Al25Ni5Cu15 glass ribbons fabricated at different cooling rates. We find that the glasses fabricated in the intermediate regime...... of cooling rates (15−25 m/s) exhibit an anomalous crystallization behavior upon reheating as compared to the glasses formed at other cooling rates. This anomalous crystallization behavior implies the existence of a thermodynamic F−S transition, could be used as an alternative method for detecting the F...

  11. Vitrification and Crystallization of Phase-Separated Metallic Liquid

    Directory of Open Access Journals (Sweden)

    Yun Cheng

    2017-02-01

    Full Text Available The liquid–liquid phase separation (LLPS behavior of Fe50Cu50 melt from 3500 K to 300 K with different rapid quenching is investigated by molecular dynamics (MD simulation based on the embedded atom method (EAM. The liquid undergoes metastable phase separation by spinodal decomposition in the undercooled regime and subsequently solidifies into three different Fe-rich microstructures: the interconnected-type structure is kept in the glass and crystal at a higher cooling rate, while the Fe-rich droplets are found to crystalize at a lower cooling rate. During the crystallization process, only Fe-rich clusters can act as the solid nuclei. The twinning planes can be observed in the crystal and only the homogeneous atomic stacking shows mirror symmetry along the twinning boundary. Our present work provides atomic-scale understanding of LLPS melt during the cooling process.

  12. Microsecond-range optical shutter for unpolarized light with chiral nematic liquid crystal

    Energy Technology Data Exchange (ETDEWEB)

    Mohammadimasoudi, Mohammad, E-mail: Mohammad.Mohammadimasoudi@elis.ugent.be; Neyts, Kristiaan; Beeckman, Jeroen [Electronics and Information Systems Department, Ghent University, St. Pietersnieuwstraat 41, 9000 Gent (Belgium); Center for Nano- and Bio-photonics, Ghent University, St. Pietersnieuwstraat 41, 9000 Gent (Belgium); Shin, Jungsoon; Lee, Keechang [Samsung Advanced Institute of Technology, 130 Samsung-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 443-803 (Korea, Republic of)

    2015-04-15

    A fast electro-optic shutter is fabricated and demonstrated. The device works independently of the polarization state of the incoming light beam. Modulation between 3% transmission and 60% transmission is obtained within a wavelength range of 50 nm with a response time of 20 μs. The device consists of two partly polymerized chiral nematic liquid crystal layers separated by a half wave plate. The transmission modulation is due to a 50 nm wavelength shift of the photonic band gap of the chiral liquid crystal realized by applying an electric field over a mixture of photo-polymerized LC and non-reactive nematic LC containing a chiral dopant. The shutter features high reflectivity in the photonic band gap. We investigate the influence of the amplitude of the applied voltage on the width and the depth of the reflection band.

  13. Microsecond-range optical shutter for unpolarized light with chiral nematic liquid crystal

    Directory of Open Access Journals (Sweden)

    Mohammad Mohammadimasoudi

    2015-04-01

    Full Text Available A fast electro-optic shutter is fabricated and demonstrated. The device works independently of the polarization state of the incoming light beam. Modulation between 3% transmission and 60% transmission is obtained within a wavelength range of 50 nm with a response time of 20 μs. The device consists of two partly polymerized chiral nematic liquid crystal layers separated by a half wave plate. The transmission modulation is due to a 50 nm wavelength shift of the photonic band gap of the chiral liquid crystal realized by applying an electric field over a mixture of photo-polymerized LC and non-reactive nematic LC containing a chiral dopant. The shutter features high reflectivity in the photonic band gap. We investigate the influence of the amplitude of the applied voltage on the width and the depth of the reflection band.

  14. Selective crystallization of tank supernatant liquid

    Energy Technology Data Exchange (ETDEWEB)

    Herting, D.

    1996-10-01

    The objective of this task is to demonstrate the feasibility of selectively removing sodium nitrate (NaNO{sub 3}) from Hanford Site tank waste by a large-scale fractional crystallization process. Two thirds of all the nuclear waste stored in Hanford`s underground storage tanks is sodium nitrate (mass basis, excluding water). Fractional crystallization can remove essentially nonradioactive NaNO{sub 3} and other sodium salts from the waste, thereby reducing the volume of low-level waste glass by as much as 90%.

  15. Modelling Ferroelectric Nanoparticles in Nematic Liquid Crystals (FERNANO)

    Science.gov (United States)

    2015-02-26

    DIPARTIMENTO DI CHIMICA FISICA ED INORGANICA VIALE DEL RISORGIMENTO 4 BOLOGNA, 40136 ITALY EOARD GRANT #FA8655-11-1-3046 Report...AND ADDRESS(ES) DIPARTIMENTO DI CHIMICA FISICA ED INORGANICA VIALE DEL RISORGIMENTO 4 BOLOGNA, 40136 ITALY 8. PERFORMING ORGANIZATION... Molecular Dynamics simulations, nematic liquid crystal, nematogen (5CB), tetragonal BaTiO3, tetragonal crystal 16. SECURITY CLASSIFICATION OF: 17

  16. In situ crystallization of low-melting ionic liquids.

    Science.gov (United States)

    Choudhury, Angshuman R; Winterton, Neil; Steiner, Alexander; Cooper, Andrew I; Johnson, Kathleen A

    2005-12-07

    Single crystals of five very low-melting ionic liquids, [emim]BF4 (mp -1.3 degrees C), [bmim]PF6 (+1.9 degrees C), [bmim]OTf (+6.7 degrees C), [hexpy]NTf2 (-3.6 degrees C), and [bmpyr]NTf2 (-10.8 degrees C), have been grown using a combined calorimetric and zone-melting approach and their crystal structures determined by X-ray diffraction.

  17. Molecular dynamics simulations of liquid crystals at interfaces

    CERN Document Server

    Shield, M

    2002-01-01

    Molecular dynamics simulations of an atomistic model of 4-n-octyl-4'-cyanobiphenyl (8CB) were performed for thin films of 8CB on solid substrates (a pseudopotential representation of the molecular topography of the (100) crystal surface of polyethylene (PE), a highly ordered atomistic model of a pseudo-crystalline PE surface and an atomistic model of a partially orientated film of PE), free standing thin films of 8CB and 8CB droplets in a hexagonal pit. The systems showed strong homeotropic anchoring at the free volume interface and planar anchoring at the solid interface whose strength was dependent upon the surface present. The free volume interface also demonstrated weak signs of smectic wetting of the bulk. Simulations of thin free standing films of liquid crystals showed the ordered nature of the liquid crystals at the two free volume interfaces can be adopted by the region of liquid crystal molecules between the homeotropic layer at each interface only if there is a certain number of liquid crystal mole...

  18. Fabrication of Single Crystal MgO Capsules

    Science.gov (United States)

    Danielson, Lisa

    2012-01-01

    A method has been developed for machining MgO crystal blocks into forms for containing metallic and silicate liquids at temperatures up to 2,400 C, and pressures up to at least 320 kilobars. Possible custom shapes include tubes, rods, insulators, capsules, and guides. Key differences in this innovative method include drilling along the crystallographic zone axes, use of a vibration minimizing material to secure the workpiece, and constant flushing of material swarf with a cooling medium/lubricant (water). A single crystal MgO block is cut into a section .5 mm thick, 1 cm on a side, using a low-speed saw with a 0.004 blade. The cut is made parallel to the direction of cleavage. The block may be cut to any thickness to achieve the desired length of the piece. To minimize drilling vibrations, the MgO block is mounted on a piece of adhesive putty in a vise. The putty wad cradles the bottom half of the entire block. Diamond coring tools are used to drill the MgO to the desired custom shape, with water used to wet and wash the surface of swarf. Compressed air may also be used to remove swarf during breaks in drilling. The MgO workpiece must be kept cool at all times with water. After all the swarf is rinsed off, the piece is left to dry overnight. If the workpiece is still attached to the base of the MgO block after drilling, it may be cut off by using a diamond cutoff wheel on a rotary hand tool or by using a low-speed saw.

  19. Chemistry of Discotic Liquid Crystals From Monomers to Polymers

    CERN Document Server

    Kumar, Sandeep

    2010-01-01

    Compiling the scattered literature into a single seminal work, this book describes the basic design principles, synthesis, and mesomorphic properties of discotic liquid crystals. Of fundamental importance as models for the study of energy and charge migration in self-organized systems, discotic liquid crystals find functional application as one-dimensional conductors, photoconductors, light emitting diodes, photovoltaic solar cells, field-effect transistors, and gas sensors. This book highlights the scientific concepts behind the hierarchical self-assembly of these disc-shaped molecules alongs

  20. A Review of Polymer-Stabilized Ferroelectric Liquid Crystals

    Directory of Open Access Journals (Sweden)

    Ingo Dierking

    2014-05-01

    Full Text Available The polymer stabilized state of ferroelectric liquid crystals (FLC is reviewed; and the effect of a dispersed polymer network in an FLC outlined and discussed. All fundamental material aspects are demonstrated; such as director tilt angle; spontaneous polarization; response time and viscosity; as well as the dielectric modes. It was found that the data can largely be explained by assuming an elastic interaction between the polymer network strands and the liquid crystal molecules. The elastic interaction parameter was determined; and increases linearly with increasing polymer concentration.

  1. Synthesis and Liquid Crystals Properties of α-Methylated Galactosides

    Science.gov (United States)

    Rodzi, N. Z. B. M.; Heidelberg, T.; Hashim, R.; Sugimura, A.; Minamikawa, H.

    Due to the amphiphilicity nature of glycolipids, some are known to exhibits liquid crystals phases both in thermotropic and lyotropic phases. Six different glycolipids have been synthesized using three steps process and their structures have been characterized by 1H-NMR and 13C-NMR in acetylated and deacytelated forms. Their liquid crystals properties were studied using optical polarising microscopy (OPM) and differential scanning calorimetry (DSC). The effect of α-methylated tails is comparedwith those of the straight chain glycolipids. The epimeric effect of the hydroxyl group at the C-4 of the sugar group was also commented.

  2. Compact electrically controlled broadband liquid crystal photonic bandgap fiber polarizer

    DEFF Research Database (Denmark)

    Wei, Lei; Alkeskjold, Thomas Tanggaard; Bjarklev, Anders Overgaard

    2009-01-01

    An electrically controlled liquid crystal photonic-bandgap fiber polarizer is experimentally demonstrated. A maximum 21.3dB electrically tunable polarization extinction ratio is achieved with 45° rotatable transmission axis as well as switched on and off in 1300nm–1600nm.......An electrically controlled liquid crystal photonic-bandgap fiber polarizer is experimentally demonstrated. A maximum 21.3dB electrically tunable polarization extinction ratio is achieved with 45° rotatable transmission axis as well as switched on and off in 1300nm–1600nm....

  3. Theory of nonlocal soliton interaction in nematic liquid crystals

    DEFF Research Database (Denmark)

    Rasmussen, Per Dalgaard; Bang, Ole; Krolikowski, Wieslaw

    2005-01-01

    We investigate interactions between spatial nonlocal bright solitons in nematic liquid crystals using an analytical “effective particle” approach as well as direct numerical simulations. The model predicts attraction of out-of-phase solitons and the existence of their stable bound state....... This nontrivial property is solely due to the nonlocal nature of the nonlinear response of the liquid crystals. We further predict and verify numerically the critical outwards angle and degree of nonlocality which determine the transition between attraction and repulsion of out-of-phase solitons....

  4. Equilibrium configurations of nematic liquid crystals on a torus.

    Science.gov (United States)

    Segatti, Antonio; Snarski, Michael; Veneroni, Marco

    2014-07-01

    The topology and the geometry of a surface play a fundamental role in determining the equilibrium configurations of thin films of liquid crystals. We propose here a theoretical analysis of a recently introduced surface Frank energy, in the case of two-dimensional nematic liquid crystals coating a toroidal particle. Our aim is to show how a different modeling of the effect of extrinsic curvature acts as a selection principle among equilibria of the classical energy and how new configurations emerge. In particular, our analysis predicts the existence of stable equilibria with complex windings.

  5. Synthesis and Characterization of New Heterocyclic Liquid Crystals

    Directory of Open Access Journals (Sweden)

    D. Srividhya

    2009-01-01

    Full Text Available This investigation enumerates the synthesis and mesomorphic properties of 1,2,3-triazole containing azobenzene liquid crystals. In these liquid crystals the methylene chain length at non polar end was varied from six to ten carbons to investigate the association properties of non polar chain on the melt. The compound was designed to have a polar ether chain at the other side of the molecule adjacent to the triazole ring and synthesized to enhance the dipolar interactions. These alterations in chemical structure produce two series of new liquid crystalline compounds with each series containing five variations in the methylene chain. The structure of the target compounds and the intermediates were confirmed by the 1H NMR, 13C NMR and IR spectral techniques. Polarized microscopic studies revealed that all the compounds in the series exhibited enantiotropic liquid crystalline properties. This was further confirmed using differential scanning calorimetric experiments. The energy minimized structure supports the mesogenic behavior of the structure.

  6. Bubble migration in a compacting crystal-liquid mush

    Science.gov (United States)

    Boudreau, Alan

    2016-04-01

    Recent theoretical models have suggested that bubbles are unlikely to undergo significant migration in a compaction crystal mush by capillary invasion while the system remains partly molten. To test this, experiments of bubble migration during compaction in a crystal-liquid mush were modeled using deformable foam crystals in corn syrup in a volumetric burette, compacted with rods of varying weights. A bubble source was provided by sodium bicarbonate (Alka-Seltzer®). Large bubbles (>several crystal sizes) are pinched by the compacting matrix and become overpressured and deformed as the bubbles experience a load change from hydrostatic to lithostatic. Once they begin to move, they move much faster than the compaction-driven liquid. Bubbles that are about the same size as the crystals but larger than the narrower pore throats move by deformation or breaking into smaller bubbles as they are forced through pore restrictions. Bubbles that are less than the typical pore diameter generally move with the liquid: The liquid + bubble mixture behaves as a single phase with a lower density than the bubble-free liquid, and as a consequence it rises faster than bubble-free liquid and allows for faster compaction. The overpressure required to force a bubble through the matrix (max grain size = 5 mm) is modest, about 5 %, and it is estimated that for a grain size of 1 mm, the required overpressure would be about 25 %. Using apatite distribution in a Stillwater olivine gabbro as an analog for bubble nucleation and growth, it is suggested that relatively large bubbles initially nucleate and grow in liquid-rich channels that develop late in the compaction history. Overpressure from compaction allows bubbles to rise higher into hotter parts of the crystal pile, where they redissolve and increase the volatile content of the liquid over what it would have without the bubble migration, leading to progressively earlier vapor saturation during crystallization of the interstitial liquid

  7. The research and progress of micro-fabrication technologies of two-dimensional photonic crystal

    Institute of Scientific and Technical Information of China (English)

    XU XingSheng; ZHANG DaoZhong

    2007-01-01

    The novel material of photonic crystal makes it possible to control a photon, and the photonic integration will have breakthrough progress due to the application of photonic crystal. It is based on the photonic crystal device that the photonic crystal integration could be realized. Therefore, we should first investigate photonic crystal devices based on the active and the passive semiconductor materials,which may have great potential application in photonic integration. The most practical and important method to fabricate two-dimensional photonic crystal is the micro-manufacture method. In this paper,we summarize and evaluate the fabrication methods of two-dimensional photonic crystal in near-infrared region, including electron beam lithography, selection of mask, dry etching, and some works of ours. This will be beneficial to the study of the photonic crystal in China.

  8. Dynamic Photonic Materials Based on Liquid Crystals (Postprint)

    Science.gov (United States)

    2013-09-01

    in liquid-crystalline side chain polymers. Liquid Crystals, 33, 1421–1427. Atkins , P.W. (1987). Physical chemistry . Oxford: Oxford University Press...unlimited. 22 Luciano De Sio et al. Figure 15 Spectral shape and position of a variety of reflection grating samples written with appropriate chemistries ...gratings written with acrylate chemistry . The scale bar corresponds to 40 nm, 150 nm, and 1500 nm from left to right. The images clearly show the two

  9. Fabricating colloidal crystals and construction of ordered nanostructures

    Directory of Open Access Journals (Sweden)

    Sun Zhiqiang

    2006-01-01

    Full Text Available AbstractColloidal crystals of polymeric or inorganic microspheres are of extensive interest due to their potential applications in such as sensing, optics, photonic bandgap and surface patterning. The article highlights a set of approaches developed in our group, which are efficient to prepare colloidal crystals with ordered voids, patterned colloidal crystals on non-planar surfaces, heterogeneous colloidal crystals of different building blocks, colloidal crystals composed of non-spherical polyhedrons, and colloidal crystals of non-close-packed colloidal microspheres in particular. The use of these colloidal crystals as templates for different microstructures range from nanoscale to micron-scale is also summarized.

  10. Phase separation of monomer in liquid crystal mixtures and surface morphology in polymer-stabilized vertical alignment liquid crystal displays

    Energy Technology Data Exchange (ETDEWEB)

    Lyu, Jae Jin; Lee, Jun Hyup; Kim, Kyeong Hyeon [Development Center, LCD Business, SAMSUNG Electronics Co. LTD., Tangjeong-Myeon, Asan, Chungnam 336-741 (Korea, Republic of); Kikuchi, Hirotsuku; Higuchi, Hiroki [Institute for Materials Chemistry and Engineering, Kyushu University, 6-1 Kasuga-Koen, Kasuga 816-8580 (Japan); Kim, Dae Hyun; Lee, Seung Hee, E-mail: jsquare.lyu@samsung.com, E-mail: lsh1@chonbuk.ac.kr [Department of BIN Fusion Technology and Department of Polymer-Nano Science and Technology, Chonbuk National University, Jeonju, Jeonbuk 561-756 (Korea, Republic of)

    2011-08-17

    The polymer-stabilized vertically aligned (PS-VA) liquid crystal display (LCD) driving mode has high potential for manufacturing low power consuming displays due to the higher transmittance and fast response as compared with the existing patterned vertically aligned and multi-domain vertically aligned modes. In this paper we have investigated the reaction mechanisms of monomer-liquid crystal blends to form a surface pre-tilt angle of liquid crystal in vertical alignment LCD associated with a fishbone electrode structure. The observed sizes of polymer bumps formed on the substrates were found to be dependent on the exposed UV wavelength and were almost equal in both top and bottom substrates. When a large UV wavelength was used, the phase separation mechanism of monomer in PS-VA mode was found nearly isotropic rather than anisotropic in contrast to the previous studies.

  11. Balance of optical, structural, and electrical properties of textured liquid phase crystallized Si solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Preidel, V., E-mail: veit.preidel@helmholtz-berlin.de; Amkreutz, D.; Haschke, J.; Wollgarten, M.; Rech, B.; Becker, C. [Helmholtz-Zentrum Berlin für Materialien und Energie GmbH, Division Renewable Energy, Kekuléstr. 5, 12489 Berlin (Germany)

    2015-06-14

    Liquid phase crystallized Si thin-film solar cells on nanoimprint textured glass substrates exhibiting two characteristic, but distinct different surface structures are presented. The impact of the substrate texture on light absorption, the structural Si material properties, and the resulting solar cell performance is analyzed. A pronounced periodic substrate texture with a vertical feature size of about 1 μm enables excellent light scattering and light trapping. However, it also gives rise to an enhanced Si crystal defect formation deteriorating the solar cell performance. In contrast, a random pattern with a low surface roughness of 45 nm allows for the growth of Si thin films being comparable to Si layers on planar reference substrates. Amorphous Si/crystalline Si heterojunction solar cells fabricated on the low-roughness texture exhibit a maximum open circuit voltage of 616 mV and internal quantum efficiency peak values exceeding 90%, resulting in an efficiency potential of 13.2%. This demonstrates that high quality crystalline Si thin films can be realized on nanoimprint patterned glass substrates by liquid phase crystallization inspiring the implementation of tailor-made nanophotonic light harvesting concepts into future liquid phase crystallized Si thin film solar cells on glass.

  12. Crystallization kinetics in liquid crystals with hexagonal precursor phases by calorimetry

    Energy Technology Data Exchange (ETDEWEB)

    Padmaja, Sunkara; Ajita, Narayanan; Potukuchi, Dakshina Murthy [Dept. of Physics, Jawaharlal Nehru Technological Univ., Kakinada (India); Srinivasulu, Maddasani; Girish, Sriram Ramchandra [Liquid Crystal Research Centre, Koneru Lakshmaiah Coll. of Engineering, Vaddeswaram (India); Pisipati, Venkata Gopala Krishna Murthy [Dept. of Chemistry, Manipal Inst. of Tech. (India)

    2010-08-15

    Design and characterization of Schiff based liquid crystalline nO.m compounds exhibiting hexagonal smectic phases are reported. Crystallization kinetics investigations are carried out in the liquid crystals (LCs) exhibiting hexagonal ordered orthogonal and tilted precursor LC phases by calorimetry. The Avrami theory is referred and results are analyzed. Influence of molecular ordering, structure, and dimensionality of the LC precursor phase on kinetics is studied. Effect of shape and flexibility of the molecule for nucleation and growth processes is investigated. Varying rate of kinetics reflects upon the transit of the system from constant type to independent type of nucleation. The trends in the Avrami parameter b and exponent n suggest sporadic nucleation. Crystal growth is interpreted as heterogeneous permeation of layered domains (or aggregates) formed by needle shaped calamitic molecules. Calorimetric observations at different crystallization temperatures CT and hold time t infer diffusion mediated crystallization. (orig.)

  13. Dispersive kinetics in discotic liquid crystals

    NARCIS (Netherlands)

    Kruglova, O.; Mulder, F.M.; Kearley, G.J.; Picken, S.J.; Stride, J.A.; Paraschiv, I.; Zuilhof, H.

    2010-01-01

    The dynamics of the discotic liquid-crystalline system, hexakis (n-hexyloxy) triphenylene (HAT6), is considered in the frame of the phenomenological model for rate processes proposed by Berlin. It describes the evolution of the system in the presence of the long-time scale correlations in the system

  14. Fabrication of ZnO nanorods in ionic liquids and their photoluminescent properties

    Institute of Scientific and Technical Information of China (English)

    WANG Li; ZHAO Bin; CHANG LiXian; ZHENG WenJun

    2007-01-01

    A novel and simple approach is reported to fabricate uniform single-crystal ZnO nanorods in ionic liquids. The as-obtained ZnO nanorods have been characterized by XRD, TEM, HRTEM, SAED, XPS, EDXA,PL and UV-vis absorption spectra. The rod diameters of the nanostructures can be controlled by tuning the amount of sodium hydroxide in the synthesis. Photoluminescence results show that the nanostructural ZnO exhibits better optical properties than bulk ZnO does and interestingly, the smaller the rod diameters are, the better optical property 1D nanostructural ZnO exhibits. The possible growth mechanism of ZnO nanorods is also investigated.

  15. Fabrication of ZnO nanorods in ionic liquids and their photoluminescent properties

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    A novel and simple approach is reported to fabricate uniform single-crystal ZnO nanorods in ionic liq-uids. The as-obtained ZnO nanorods have been characterized by XRD,TEM,HRTEM,SAED,XPS,EDXA,PL and UV-vis absorption spectra. The rod diameters of the nanostructures can be controlled by tuning the amount of sodium hydroxide in the synthesis. Photoluminescence results show that the nanos-tructural ZnO exhibits better optical properties than bulk ZnO does and interestingly,the smaller the rod diameters are,the better optical property 1D nanostructural ZnO exhibits. The possible growth mechanism of ZnO nanorods is also investigated.

  16. Nematic liquid crystals confined in microcapillaries for imaging phenomena at liquid-liquid interfaces.

    Science.gov (United States)

    Zhong, Shenghong; Jang, Chang-Hyun

    2015-09-21

    Here, we report the development of an experimental system based on liquid crystals (LCs) confined in microcapillaries for imaging interfacial phenomena. The inner surfaces of the microcapillaries were modified with octadecyltrichlorosilane to promote an escaped-radial configuration of LCs. We checked the optical appearance of the capillary-confined LCs under a crossed polarizing microscope and determined their arrangement based on side and top views. We then placed the capillary-confined LCs in contact with non-surfactant and surfactant solutions, producing characteristic textures of two bright lines and a four-petal shape, respectively. We also evaluated the sensitivity, stability, and reusability of the system. Our imaging system was more sensitive than previously reported LC thin film systems. The textures formed in microcapillaries were stable for more than 120 h and the capillaries could be reused at least 10 times. Finally, we successfully applied our system to image the interactions of phospholipids and bivalent metal ions. In summary, we developed a simple, small, portable, sensitive, stable, and reusable experimental system that can be broadly applied to monitor liquid-liquid interfacial phenomena. These results provide valuable information for designs using confined LCs as chemoresponsive materials in optical sensors.

  17. Effects of liquid ammonia treatment on the physical properties of knit fabric

    Science.gov (United States)

    Lee, I. Y.; Kim, S. D.; Hwang, C. S.; Kim, S. R.; Park, S. W.

    2016-07-01

    The cellulosic knit fabric must be treated by NaOH solution in silket process to modify dyeability, luster, physical property, etc. But the silket treated knit fabric has a stiff touch, and must be treated with much of silicone softener. But it has bad durability of laundry. And the silket process has a problem that must discharge a lot of alkaline wastewater. In case of woven fabrics, as an alternative to silket process, liquid ammonia process was developed and this process is eco-friendly because the used ammonia is recovered by 98%. But the knit fabrics are not applicable to the conventional liquid ammonia process because they have selvedge curling problem and are very sensitive to tension. Recently, Korea High Tech Textile Research Institute(Korea) and Lafer SPA(Italy) worked together to develop the new liquid ammonia process for knit fabrics. In the present study, the physical properties of knit fabric after the newly-developed liquid ammonia treatment were investigated. The basic physical properties of knit fabric were measured using the Kawabata evaluation system. In addition, the dyeability, dimensional stability, eco-friendliness were investigated. The results showed that liquid ammonia treatment gave improved physical properties, which can be attributed to fast and uniform swelling, to knit fabric and resulted in a dimensional stability. The knit fabric treated in liquid ammonia showed a darker colour and unique appearance. Above all, the knit fabric treated in liquid ammonia had softer touch and superior gloss than the knit fabric of silket process. The new liquid ammonia process for knit fabrics will become the highest quality standard for knits and will be considered the preferred finish also thanks to eco-friendliness.

  18. Infiltration liquid crystal in microstructured polymer optical fibers

    DEFF Research Database (Denmark)

    Yuan, Scott Wu; Wei, Lei; Bang, Ole

    2009-01-01

    POF is butt-coupled to a conventional single mode fiber (SMF) with the broadband light from a supercontinuum source. It is clear to see the colour of the guided modes is red, since some wavelengths are attenuated by the material loss of PMMA in visible region. A positive dielectric anisotropy liquid crystal E...

  19. Photoresponsive liquid crystals based on halogen bonding of azopyridines.

    Science.gov (United States)

    Chen, Yinjie; Yu, Haifeng; Zhang, Lanying; Yang, Huai; Lu, Yunfeng

    2014-09-04

    A series of photoresponsive halogen-bonded liquid crystals (LCs) were successfully constructed using molecular halogen and azopyridine compounds, which show interesting properties of photoinduced phase transition upon UV irradiation. In addition, bromine-bonded LCs were first obtained with high mesophase stability.

  20. Liquid-crystal intraocular adaptive lens with wireless control.

    Science.gov (United States)

    Simonov, Aleksey N; Vdovin, Gleb; Loktev, Mikhail

    2007-06-11

    We present a prototype of an adaptive intraocular lens based on a modal liquid-crystal spatial phase modulator with wireless control. The modal corrector consists of a nematic liquid-crystal layer sandwiched between two glass substrates with transparent low- and high-ohmic electrodes, respectively. Adaptive correction of ocular aberrations is achieved by changing the amplitude and the frequency of the applied control voltage. The convex-shaped glass substrates provide the required initial focusing power of the lens. A loop antenna mounded on the rim of the lens delivers an amplitude-modulated radio-frequency control signal to the integrated rectifier circuit that drives the liquid-crystal modal corrector. In vitro measurements of a 5-mm clear aperture prototype with an initial focusing power of +12.5 diopter, remotely driven by a radio-frequency control unit at ~6 MHz, were carried out using a Shack-Hartmann wavefront sensor. The lens based on a 40-mum thick liquid-crystal layer allows for an adjustable defocus of 4 waves, i. e. an accommodation of ~2.51 dioptres at a wavelength of 534 nm, and correction of spherical aberration coefficient ranging from -0.8 to 0.67 waves. Frequency-switching technique was employed to increase the response speed and eliminate transient overshoots in aberration coefficients. The full-scale settling time of the adaptive modal corrector was measured to be ~4 s.

  1. Liquid Crystal Gel Reduces Age Spots by Promoting Skin Turnover

    Directory of Open Access Journals (Sweden)

    Mina Musashi

    2014-07-01

    Full Text Available Studies have shown that liquid crystals structurally resembling the intercellular lipids in the stratum corneum can beneficially affect the skin when applied topically by stimulating the skin’s natural regenerative functions and accelerating epidermal turnover. In the present study, the effects of applying low concentrations of a liquid crystal gel of our own creation were evaluated using epidermal thickening in mouse skin as an assay for effective stimulation of epidermal turnover. A liquid crystal gel was also applied topically to human facial skin, and analysis was conducted using before-and-after photographs of age spots, measurements of L* values that reflect degree of skin pigmentation, single-layer samples of the stratum corneum obtained via tape-stripping, and measurements of trans-epidermal water loss that reflect the status of the skin’s barrier function. The results suggested that cost-effective creams containing as low as 5% liquid crystal gel might be effective and safely sold as skin care products targeting age spots and other problems relating to uneven skin pigmentation.

  2. Advances in chemical physics advances in liquid crystals

    CERN Document Server

    Prigogine, Ilya; Vij, Jagdish K

    2009-01-01

    Prigogine and Rice's highly acclaimed series, Advances in Chemical Physics, provides a forum for critical, authoritative reviews of current topics in every area of chemical physics. Edited by J.K. Vij, this volume focuses on recent advances in liquid crystals with significant, up-to-date chapters authored by internationally recognized researchers in the field.

  3. Orientational phase transition in cubic liquid crystals with positional order

    OpenAIRE

    Pokrovsky, V.L.; Saidachmetov, P.A.

    1988-01-01

    An electric field can give rise to a shear deformation of a cubic liquid crystal with long-range positional order fixed by two plates. The critical value of the field does not depend on the size of the system and depends crucially on the orientation.

  4. Probing Viscoelasticity of Cholesteric Liquid Crystals in a Twisting Cell

    Science.gov (United States)

    Angelo, Joseph; Moheghi, Alireza; Diorio, Nick; Jakli, Antal

    2013-03-01

    Viscoelastic properties of liquid crystals are typically studied either using Poiseuille flow, which can be produced by a pressure gradient in a capillary tube,[2] or Couette flow, which can be generated by a shear between concentric cylinders.[3] We use a different method in which we twist the liquid crystal sandwiched between two cylindrical glass plates, one of which can rotate about its center, the other of which is fixed. When the cell is twisted, there is a force proportional to the twist angle and the twist elastic constant, and inversely proportional to the pitch and sample thickness, normal to the substrates due to the change in pitch in the cholesteric liquid crystal (CLC). Measuring this force on various CLCs with known pitch we could obtain the twist elastic constants. In addition to the equilibrium force, we observed a transient force during the rotation, which is related to the flow of the material, thus allowing us to determine the Leslie viscosity component α1, which typically cannot be assessed by other methods. We expect this apparatus to be a useful tool to study the visco-elastic properties of liquid crystals. The authors acknowledge support from NSF grant DMR-0907055.

  5. Liquid Crystal Photonic bandgap Fibers: Modeling and Devices

    DEFF Research Database (Denmark)

    Weirich, Johannes

    In this PhD thesis an experimental and numerical investigation of liquid crystal infiltrated photonic bandgap fibers (LCPBGs) is presented. A simulation scheme for modeling LCPBG devices including electrical tunability is presented. New experimental techniques, boundary coating and the applicatio...

  6. Frederiks transition in ferroelectric liquid-crystal nanosuspensions

    Science.gov (United States)

    Shelestiuk, Sergii M.; Reshetnyak, Victor Yu.; Sluckin, Timothy J.

    2011-04-01

    We construct a theoretical model of the dielectric properties of a ferroelectric LC nanosuspension (FLCNS), using a generalized Maxwell-Garnett picture. The theory supposes that an FLCNS may as a first approximation be considered as a complex homogeneous dielectric ceramic, thus neglecting positional correlations of the colloidal particles. The FLCNS then consists of an anisotropic matrix with a very low concentration (<1% by volume) of impurity particles. The impurity particles possess both shape and dielectric anisotropy, as well as a permanent electric polarization and strong liquid-crystal director anchoring on the particle surface. We show that the effective dielectric properties for capacitance properties and for effective liquid-crystal free energies do not coincide. We calculate the effect of doping a liquid crystal with ferroelectric impurities on the Frederiks transition. The theory takes account of inclusion shape, dielectric susceptibility, and local field effects. We neglect the possibility of dielectric particle chaining, which appears experimentally not to occur in general. Our calculations suggest, in qualitative agreement with experiment, that doping a nematic liquid crystal with ferroelectric particles, even at very low particle concentration, can in some cases significantly decrease the electric Frederiks threshold field.

  7. LIQUID CRYSTAL POLYMERS (LCP) USED AS A MACHINING FLUID CD

    Science.gov (United States)

    This interactive CD was produced to present the science, research activities, and beneficial environmental and machining advantages for utilizing Liquid Crystal Polymers (LCPs) as a machine fluid in the manufacturing industry.In 1995, the USEPA funded a project to cut flu...

  8. PREPARATION OF POLYMER DISPERSED LIQUID CRYSTALS USING PHOTOPOLYMERIZATION

    Institute of Scientific and Technical Information of China (English)

    Xing-he Fan; Xiao-feng Xie; Yasuo Hatate

    2001-01-01

    2-Hydroxyethyl methacrylate (HEMA) and styrene copolymers are prepared by photopolymerization. The electrooptical behavior and microstructure of the polymer dispersed liquid crystal films are investigated by using He-Ne laser and scanning electron micro scopy, respectively. With increasing E7 content in the copolymer, droplet size increased, threshold voltage decreased.

  9. 21 CFR 880.2200 - Liquid crystal forehead temperature strip.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Liquid crystal forehead temperature strip. 880.2200 Section 880.2200 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN... the presence or absence of fever, or to monitor body temperature changes. The device displays...

  10. Optimization of liquid crystal structures for real time holography applications.

    Science.gov (United States)

    Sahraoui, B; Anczykowska, A; Bartkiewicz, S; Mysliwiec, J

    2011-11-21

    In this paper we present results of experiments designed to increase our understanding of the photorefractive effect occurring during processes of dynamic hologram generation in Hybrid Photorefractive Liquid Crystal Structures (HPLCS). We also propose equivalent mathematical model which can be used to optimize those structures in order to obtain the highest diffraction efficiency in possibly shortest time.

  11. Computer simulation of hard-core models for liquid crystals

    NARCIS (Netherlands)

    Frenkel, D.

    1987-01-01

    A review is presented of computer simulations of liquid crystal systems. It will be shown that the shape of hard-core particles is of crucial importance for the stability of the phases. Both static and dynamic properties of the systems are obtained by means of computer simulation.

  12. Optical pulse generator using liquid crystal light valve

    Science.gov (United States)

    Collins, S. A., Jr.

    1984-01-01

    Numerical optical computing is discussed. A design for an optical pulse generator using a Hughes Liquid crystal light valve and intended for application as an optical clock in a numerical optical computer is considered. The pulse generator is similar in concept to the familiar electronic multivibrator, having a flip-flop and delay units.

  13. Cholesteric carbohydrate liquid crystals incorporating an intact glucopyranose moiety

    NARCIS (Netherlands)

    Smits, E; Engberts, J.B.F.N.; Kellogg, R.M; van Doren, H.A.

    1997-01-01

    Recently, the first monosaccharide derivatives containing a fully intact monosaccharide and two vicinal OH-groups which display thermotropic chiral mesophases were synthesized. These liquid crystals have a rigid core, with a trans-decalin-like skeleton incorporating the D-glucopyranose ring, substit

  14. Fabrication of Colloidal Photonic Crystals with Heterostructure by Spin-Coating Method

    Institute of Scientific and Technical Information of China (English)

    WANG Ai-Jun; CHEN Sheng-Li; DONG Peng; CAI Xiao-Gang; ZHOU Qian; YUAN Gui-Mei; HU Chun-Tian; ZANG Dao-Zhong

    2009-01-01

    Colloidal photonic crystal heterostructures, composed of two opaline photonic crystal films of silica spheres with different diameters, are fabricated by a two-step spin-coating method. Scanning electron microscopy (SEM) and UV-vis speetrophotometer are used to characterize the heterostructures. The SEM images show good ordering of the two-layer colloidal crystals constituting the heterostructures. The transmission spectra measured from the (111) plane in the heterostructure show that the composite colloidal photonic crystals have double photonic stop bands. Furthermore, when the sizes of the silica spheres used for fabricating the composite photonic crystal are slightly different, the transmission spectrum shows that the composite photonic crystals have more extended bandgap than that of the individual photonic crystals due to partial overlapping of its two photonie stop bands.

  15. Optical characterisation of photonic wire and photonic crystal waveguides fabricated using nanoimprint lithography

    DEFF Research Database (Denmark)

    Borel, Peter Ingo; Frandsen, Lars Hagedorn; Lavrinenko, Andrei;

    2006-01-01

    We have characterised photonic-crystal and photonic-wire waveguides fabricated by thermal nanoimprint lithography. The structures, with feature sizes down below 20 nm, are benchmarked against similar structures defined by direct electron beam lithography....

  16. Magnetic alignment study of rare-earth-containing liquid crystals.

    Science.gov (United States)

    Galyametdinov, Yury G; Haase, Wolfgang; Goderis, Bart; Moors, Dries; Driesen, Kris; Van Deun, Rik; Binnemans, Koen

    2007-12-20

    The liquid-crystalline rare-earth complexes of the type [Ln(LH)3(DOS)3]-where Ln is Tb, Dy, Ho, Er, Tm, or Yb; LH is the Schiff base N-octadecyl-4-tetradecyloxysalicylaldimine; and DOS is dodecylsulfate-exhibit a smectic A phase. Because of the presence of rare-earth ions with a large magnetic anisotropy, the smectic A phase of these liquid crystals can be easier aligned in an external magnetic field than smectic A phases of conventional liquid crystals. The magnetic anisotropy of the [Ln(LH)3(DOS)3] complexes was determined by measurement of the temperature-dependence of the magnetic susceptibility using a Faraday balance. The highest value for the magnetic anisotropy was found for the dysprosium(III) complex. The magnetic alignment of these liquid crystals was studied by time-resolved synchrotron small-angle X-ray scattering experiments. Depending on the sign of the magnetic anisotropy, the director of the liquid-crystalline molecules was aligned parallel or perpendicular to the magnetic field lines. A positive value of the magnetic anisotropy (and parallel alignment) was found for the thulium(III) and the ytterbium(III) complexes, whereas a negative value of the magnetic anisotropy (and perpendicular alignment) was observed for the terbium(III) and dysprosium(III) complexes.

  17. Distinctive features of a crystal, crystal-like properties of a liquid and atomic quantum effects

    Science.gov (United States)

    Pavlov, V. V.

    2008-02-01

    It is believed that 'a crystal is similar to the crowd which is tightly compressed within enclosed space' and its structure in the simplest case is similar to the closest ball packing. Based on this assumption the strength of a crystal, long range ordering, the granular structure, capability for polymorphic transformation etc. were deduced. In a liquid such properties are impossible even in feebly marked form. However some of crystal-like features of melts are revealed in experiments and they frequently remain unacknowledged with a theory. From the other hand, computer model of crystal does not give even listed distinctive features of a crystal state. In the classical model the solidification more than to sunflower oil consistence was not obtained. It is possible to reach the real solidification if quantum 'freezing' of a part of atomic degrees of freedom would taken into account and any movement would stopped at zero energy level. There are some reasons to believe that another crystal properties and corresponding crystal-like features of liquids also can be got basing on these atomic quantum effects. In this case the reasons of many discussions on 'heredity', 'memory' of liquid and its microheterogeneity disappear.

  18. Droplet Breakup of the Nematic Liquid Crystal MBBA

    CERN Document Server

    Nachman, Benjamin

    2012-01-01

    Droplet breakup is a well studied phenomena in Newtonian fluids. One property of this behavior is that, independent of initial conditions, the minimum radius exhibits power law scaling with the time left to breakup tau. Because they have additional structure and shear dependent viscosity, liquid crystals pose an interesting complication to such studies. Here, we investigate the breakup of a synthetic nematic liquid crystal known as MBBA. We determine the phase of the solution by using a cross polarizer setup in situ with the liquid bridge breakup apparatus. Consistent with previous studies of scaling behavior in viscous-inertial fluid breakup, when MBBA is in the isotropic phase, the minimum radius decreases as tau^{1.03 \\pm 0.04}. In the nematic phase however, we observe very different thinning behavior. Our measurements of the thinning profile are consistent with two interpretations. In the first interpretation, the breakup is universal and consists of two different regimes. The first regime is characterize...

  19. Physical limitations and fundamental factors affecting performance of liquid crystal tunable lenses with concentric electrode rings.

    Science.gov (United States)

    Li, Liwei; Bryant, Doug; van Heugten, Tony; Bos, Philip J

    2013-03-20

    A comprehensive analysis of fundamental factors and their effects on the performance of liquid crystal (LC)-based lenses is given. The analysis adopts numerical LC director and electric field simulation, as well as scalar diffraction theory for calculating the lens performance considering different variable factors. A high-efficiency LC lens with concentric electrode rings is fabricated for verifying and enriching the analysis. The measurement results are in close agreement with the analysis, and a summary of key factors is given with their quantitative contributions to the efficiency.

  20. Liquid Crystal Polymer (LCP) based antenna for flexible system on package (SoP) applications

    KAUST Repository

    Marnat, Loic

    2012-06-01

    The design, fabrication and measurement of a bowtie antenna on a flexible Liquid Crystal Polymer (LCP) substrate is reported in this paper. The antenna is fed by a balun transition which helps improve the gain up to 5.1 dB. The antenna performance is analyzed for both planar and curved substrates. The comparison between simulation and measurements shows a good agreement. This structure can either be used to sense the bending of the substrate or use the bending to tilt the beam. © 2012 IEEE.

  1. Random lasing from dye-doped negative liquid crystals using ZnO nanoparticles as tunable scatters

    Science.gov (United States)

    Li, Long-Wu; Shang, Zhen-Zhen; Deng, Luogen

    2016-09-01

    This work demonstrates the realization of a lasing in scattering media, which contains dispersive solution of ZnO nanoparticles (NPs) and laser dye 4-dicyanomethylene-2-methyle-6-(p-dimethylaminostyryl)-4H-pyran(DCM) in negative liquid crystals (LCs) that was injected into a cell. The lasing intensity of the dye-doped negative LC laser can be tuned from low to high if the NPs concentration is increased. The tunability of the laser is attributable to the clusters-sensitive feature in effective refractive index of the negative LCs. Such a tunable negative liquid crystal laser can be used in the fabrication of new optical sources, optical communication, and liquid crystal laser displays. Project supported by the Doctoral Science Research Start-up Funding of Guizhou Normal University, China (Grant No. 11904-0514162) and the National Natural Science Foundation of China (Grant No. 11474021).

  2. Fabrication of Crack-Free Photonic Crystal Films on Superhydrophobic Nanopin Surface.

    Science.gov (United States)

    Xia, Tian; Luo, Wenhao; Hu, Fan; Qiu, Wu; Zhang, Zhisen; Lin, Youhui; Liu, Xiang Yang

    2017-07-05

    On the basis of their superior optical performance, photonic crystals (PCs) have been investigated as excellent candidates for widespread applications including sensors, displays, separation processes, and catalysis. However, fabrication of structurally controllable large-area PC assemblies with no defects is still a tough task. Herein, we develop an effective strategy for preparing centimeter-scale crack-free photonic crystal films by the combined effects of soft assembly and superhydrophobic nanopin surfaces. Owing to its large contact angle and low-adhesive force on the superhydrophobic substrate, the colloidal suspension exhibits a continuous retraction of the three-phase (gas-liquid-solid) contact line (TCL) in the process of solvent (water molecules) evaporation. The constantly receding TCL can bring the colloidal spheres closer to each other, which could timely close the gaps due to the loss of water molecules. As a result, close-packed and well-ordered assembly structures can be easily obtained. We expect that this work may pave the way to utilize novel superhydrophobic materials for designing and developing high-quality PCs and to apply PCs in different fields.

  3. Application of Reed-Vibration Mechanical Spectroscopy for Liquids in Studying Liquid Crystallization

    Science.gov (United States)

    Zhou, Heng-Wei; Wang, Li-Na; Zhang, Li-Li; Huang, Yi-Neng

    2013-08-01

    By using the reed-vibration mechanical spectroscopy for liquids (RMS-L), we measured the complex Young's modulus of dimethyl phthalate (DP) during a cooling and heating circulation starting from room temperature at about 2 KHz. The results show that there is no crystallization in the cooling supercooled liquid (CSL) of DP, but a crystallization process in the heating supercooled liquid (HSL) after the reverse glass transition. Based on the measured modulus, crystal volume fraction (v) during the HSL crystallization was calculated. Moreover, the Avrami exponent (n) was obtained according to the JJMA equation and v data. In view of n versus temperature and v, the nucleation dynamics was analyzed, and especially, there has already existed saturate nuclei in DP HSL before the crystallization. Furthermore, the authors inferred that the nuclei are induced by the random frozen stress in the glass, but there is no nucleus in CSL. The above results indicated that RMS-L might provide a new way to measure and analyze the crystallization of liquids.

  4. IR Sensor Synchronizing Active Shutter Glasses for 3D HDTV with Flexible Liquid Crystal Lenses

    OpenAIRE

    Jeong In Han

    2013-01-01

    IR sensor synchronizing active shutter glasses for three-dimensional high definition television (3D HDTV) were developed using a flexible liquid crystal (FLC) lens. The FLC lens was made on a polycarbonate (PC) substrate using conventional liquid crystal display (LCD) processes. The flexible liquid crystal lens displayed a maximum transmission of 32% and total response time of 2.56 ms. The transmittance, the contrast ratio and the response time of the flexible liquid crystal lens were superio...

  5. Morphological control and polarization switching in polymer dispersed liquid crystal materials and devices

    Indian Academy of Sciences (India)

    K K Raina; Pankaj Kumar; Praveen Malik

    2006-11-01

    Liquid crystals dispersed in polymer systems constitute novel class of optical materials. The precise control of the liquid crystal droplet morphology in the polymer matrix is essentially required to meet the prerequisites of display device. Experiments have been carried out to investigate and identify the material properties and processing conditions required for the precise control of the droplet morphology of the dispersed liquid crystal systems. Polarization switching has been studied. Aligned liquid crystal dispersed systems showed higher polarization over unaligned ones.

  6. Application of pyrolysis process to remove and recover liquid crystal and films from waste liquid crystal display glass.

    Science.gov (United States)

    Lu, Rixin; Ma, En; Xu, Zhenming

    2012-12-01

    Liquid crystal display (LCD) glass mainly consists of polarizing film, liquid crystal and glass substrate. Removing and recovering the liquid crystal and films from the LCD glass effectively has important significance for recovering the other parts. This study proposed a pyrolysis process to recover the organic parts from LCD glass. Through thermal gravimetric analysis, the pyrolysis temperature of the LCD glass could be chosen at 850 K. The removal rate of organic parts from LCD glass reached 87.87 wt%. Pyrolysis products consisted of 66.82 wt% oils, 21.01 wt% gaseous and 12.13 wt% residues. In addition, the oils contained 46.27 wt% acetic acid and 32.94 wt% triphenyl phosphate. Then, the pyrolysis mechanisms and products sources of the liquid crystal glass have been analyzed based on the information of bonds energy. The pyrolysis mechanism analysis proved that the products mainly consisted of acetic acid, triphenyl phosphate and C, which is consistent to the results of GC-MS analysis. A reasonable way has been put forward to recycle the pyrolysis products: acetic acid and triphenyl phosphate can be collected by distillation, the rest oils and gases can be used as fuel and the remained glass can be used to extract indium and to produce building materials.

  7. Time-resolved crystallization of deeply cooled liquid hydrogen isotopes

    Energy Technology Data Exchange (ETDEWEB)

    Kuehnel, Matthias

    2014-02-15

    This thesis serves two main purposes: 1. The introduction of a novel experimental method to investigate phase change dynamics of supercooled liquids 2. First-time measurements for the crystallization behaviour for hydrogen isotopes under various conditions (1) The new method is established by the synergy of a liquid microjet of ∼ 5 μm diameter and a scattering technique with high spatial resolution, here linear Raman spectroscopy. Due to the high directional stability and the known velocity of the liquid filament, its traveling axis corresponds to a time axis static in space. Utilizing evaporative cooling in a vacuum environment, the propagating liquid cools down rapidly and eventually experiences a phase transition to the crystalline state. This temporal evolution is probed along the filament axis, ultimately resulting in a time resolution of 10 ns. The feasibility of this approach is proven successfully within the following experiments. (2) A main object of study are para-hydrogen liquid filaments. Raman spectra reveal a temperature gradient of the liquid across the filament. This behaviour can quantitatively be reconstructed by numerical simulations using a layered model and is rooted in the effectiveness of evaporative cooling on the surface and a finite thermal conductivity. The deepest supercoolings achieved are ∼ 30% below the melting point, at which the filament starts to solidify from the surface towards the core. With a crystal growth velocity extracted from the data the appropriate growth mechanism is identified. The crystal structure that initially forms is metastable and probably the result of Ostwald's rule of stages. Indications for a transition within the solid towards the stable equilibrium phase support this interpretation. The analog isotope ortho-deuterium is evidenced to behave qualitatively similar with quantitative differences being mass related. In further measurements, isotopic mixtures of para-hydrogen and ortho-deuterium are

  8. Topology design and fabrication of an efficient double 90° photonic crystal waveguide bend

    DEFF Research Database (Denmark)

    Jensen, Jakob Søndergaard; Sigmund, Ole; Frandsen, Lars Hagedorn

    2005-01-01

    We have designed and fabricated a novel 90 bend in a photonic crystal waveguide. The design was obtained using topology optimization and the fabricated waveguide displays a bend loss for transverse-electric-polarized light of less than 1 dB per bend in a 200-nm wavelength range....

  9. Shear-accelerated crystallization in a supercooled atomic liquid.

    Science.gov (United States)

    Shao, Zhen; Singer, Jonathan P; Liu, Yanhui; Liu, Ze; Li, Huiping; Gopinadhan, Manesh; O'Hern, Corey S; Schroers, Jan; Osuji, Chinedum O

    2015-02-01

    A bulk metallic glass forming alloy is subjected to shear flow in its supercooled state by compression of a short rod to produce a flat disk. The resulting material exhibits enhanced crystallization kinetics during isothermal annealing as reflected in the decrease of the crystallization time relative to the nondeformed case. The transition from quiescent to shear-accelerated crystallization is linked to strain accumulated during shear flow above a critical shear rate γ̇(c)≈0.3 s(-1) which corresponds to Péclet number, Pe∼O(1). The observation of shear-accelerated crystallization in an atomic system at modest shear rates is uncommon. It is made possible here by the substantial viscosity of the supercooled liquid which increases strongly with temperature in the approach to the glass transition. We may therefore anticipate the encounter of nontrivial shear-related effects during thermoplastic deformation of similar systems.

  10. Electrically controllable liquid crystal photonic bandgap fiber with dual-frequency control

    DEFF Research Database (Denmark)

    Scolari, Lara; Alkeskjold, Thomas Tanggaard; Riishede, Jesper

    2005-01-01

    We present an electrically tunable liquid crystal photonic bandgap fiber device based on a dual frequency liquid crystal with pre-tilted molecules that allows the bandgaps to be continuously tuned. The frequency dependent behavior of the liquid crystal enables active shifting of the bandgaps toward...

  11. Synthesis and mesomorphic properties of new azine-type liquid crystals

    Institute of Scientific and Technical Information of China (English)

    Qiang Wei; Lin Shi; Hui Cao; Huai Yang; Yan Bin Wang

    2007-01-01

    A series of symmetrical azine-type liquid crystals were synthesized. The characteristic of these liquid crystals is that they had high clearing point (~320 ℃) and broad thermal range of nematic phase (~154 ℃). It was also found that the end groups of the liquid crystals had effect on the mesomorphic properties.

  12. Molecular alignment enhancement phenomenon of polymer formed from a liquid crystal monomer in a liquid crystal solvent

    Science.gov (United States)

    Fujikake, Hideo; Murashige, Takeshi; Sato, Hiroto; Kawakita, Masahiro; Kikuchi, Hiroshi

    2003-03-01

    We report an abnormal alignment enhancement phenomenon of polymer molecules. The alignment order of a rigid-skeleton polymer made from a liquid crystalline monomer in a low-molecular-weight liquid crystal solvent was drastically enhanced with increasing temperature, even though the alignment order of the solution of the liquid crystal and monomer decreased. From polymer molecular alignment observations using polarizing Raman scattering microscopy, it was found that the polymer alignment order was three times greater than that of the original aligned monomer and polymer. This super alignment technique of polymer using a molecular-scaled self-assembly mechanism is applicable to the formation of electrically and/or optically functional nanopolymer wires.

  13. Liquid crystals from mesogens containing gold nanoparticles

    Science.gov (United States)

    Lewandowski, Wiktor; Gorecka, Ewa

    Long-range ordered structures made of nanoparticles are perspective materials for future optical, electronic and sensing technologies. Conspicuous physicochemical features of nanoparticle aggregates originate from distant-dependent collective interactions, therefore lately a lot of attention was put to the development of assembly strategies allowing control over nanoparticle spatial distribution. In this chapter we will focus on the assembly process based on using thermotropic liquid-crystalline molecules as surface nanoparticle ligands. First, we discuss architectural parameters that inuence structure and thermal properties of the aggregates. Then, we show that this approach enables formation of assemblies with metamaterial characteristic, gives access to dynamic materials with light-, magneto- and thermo-responsive behavior and allows formation of aggregates with unique structures, which all make this strategy an attractive object of research.

  14. Photoresponsive Liquid Crystals Based on Dihydroazulene

    DEFF Research Database (Denmark)

    Petersen, Anne Ugleholdt

    . Irradiation of such a DHA in the nematic phase gave partial conversion to avinylheptafulvene (VHF), not showing any changes in the mesophase, though a higher alignmentwas obtained when this sample was irradiated in its liquid crystalline state.Photomicrographs of the DHA under crossed polarizers before...... into a nematic host material, the conversion fromDHA to VHF upon irradiation did not affect any change in the dielectric anisotropy. However, theorder parameter was strongly affected by the formation of the VHF structure. It was found that thisDHA in a nematic host absorbed light when photons were passed through...... parallel to the alignmentof the nematic phase, while when the incident angle was perpendicular, the absorbance wasdrastically reduced. These differences for parallel and perpendicular absorbances wereindistinguishable for the VHF form. The corresponding azulene systems were also studied, whichshowed good...

  15. Modal liquid crystal lens driven by low voltage produced from a wireless controlling and driving system

    Science.gov (United States)

    Zhang, Xinyu; Loktev, Mikhail; Vdovin, Gleb

    2005-04-01

    A wireless driving and controlling setup constructed by a coil system and a simple power metal-oxide-semiconductor field effect transistor switch circuit for modal liquid crystal lens has been designed, fabricated and characterized. Electrical and structural modeling and analysis have been applied to the design of the wireless power transforming and controlling system. Some key electrical characteristics of coils with different diameter and winding, such as resistance, impedance, capacitance, inductance, and Q factor, which determine the driving and controlling behaviors of the coil system constructed, are given. The liquid crystal lens can be operated under relatively low driving voltage ranging from about 1.5to12Vrms. Under dynamic operation, the prototype system has shown a stable driving and controlling performance to liquid crystal lens under the condition of switching mode of a few KHz. The possibility of integrating very small coils connected in series onto a small-size silicon chip as an integrated receiver in biomedicine application has been shown experimentally.

  16. A hybrid tunable THz metadevice using a high birefringence liquid crystal

    Science.gov (United States)

    Chikhi, Nassim; Lisitskiy, Mikhail; Papari, Gianpaolo; Tkachenko, Volodymyr; Andreone, Antonello

    2016-01-01

    We investigate a hybrid re-configurable three dimensional metamaterial based on liquid crystal as tuning element in order to build novel devices operating in the terahertz range. The proposed metadevice is an array of meta-atoms consisting of split ring resonators having suspended conducting cantilevers in the gap region. Adding a “third dimension” to a standard planar device plays a dual role: (i) enhance the tunability of the overall structure, exploiting the birefringence of the liquid crystal at its best, and (ii) improve the field confinement and therefore the ability of the metadevice to efficiently steer the THz signal. We describe the design, electromagnetic simulation, fabrication and experimental characterization of this new class of tunable metamaterials under an externally applied small voltage. By infiltrating tiny quantities of a nematic liquid crystal in the structure, we induce a frequency shift in the resonant response of the order of 7–8% in terms of bandwidth and about two orders of magnitude change in the signal absorption. We discuss how such a hybrid structure can be exploited for the development of a THz spatial light modulator. PMID:27708395

  17. Fabrication of radiation detector using PbI{sub 2} crystal

    Energy Technology Data Exchange (ETDEWEB)

    Shoji, T.; Sakamoto, K.; Ohba, K.; Suehiro, T.; Hiratate, Y. [Tohoku Inst. of Tech., Sendai (Japan)

    1996-07-01

    In this paper, we will discuss the PbI{sub 2} radiation detector fabricated from a crystal grown by the zone melting method and by the vapor phase method, together with characteristics of the crystal obtained by a XPS analyzer. (J.P.N.)

  18. Fresnel Lenses fabricated by femtosecond laser micromachining on Polymer 1D Photonic Crystal

    Directory of Open Access Journals (Sweden)

    Guduru Surya S.K.

    2013-11-01

    Full Text Available We report the fabrication of micro Fresnel lenses by femtosecond laser surface ablation on polymer 1D photonic crystals. This device is designed to focus the transmitted wavelength of the photonic crystal and filter the wavelengths corresponding to the photonic band gap region. Integration of such devices in a wavelength selective light harvesting and filtering microchip can be achieved.

  19. Minimal model for transient swimming in a liquid crystal

    CERN Document Server

    Krieger, Madison S; Powers, Thomas R

    2015-01-01

    When a microorganism begins swimming from rest in a Newtonian fluid such as water, it rapidly attains its steady-state swimming speed since changes in the velocity field spread quickly when the Reynolds number is small. However, swimming microorganisms are commonly found or studied in complex fluids. Because these fluids have long relaxation times, the time to attain the steady- state swimming speed can also be long. In this article we study the swimming startup problem in the simplest liquid crystalline fluid: a two-dimensional hexatic liquid crystal film. We study the dependence of startup time on anchoring strength and Ericksen number, which is the ratio of viscous to elastic stresses. For strong anchoring, the fluid flow starts up immediately but the liquid crystal field and swimming velocity attain their sinusoidal steady-state values after a time proportional to the relaxation time of the liquid crystal. When the Ericksen number is high, the behavior is the same as in the strong anchoring case for any a...

  20. Mixing effects in the crystallization of supercooled quantum binary liquids

    Energy Technology Data Exchange (ETDEWEB)

    Kühnel, M.; Kalinin, A. [Institut für Kernphysik, J. W. Goethe-Universität, Max-von-Laue-Str. 1, 60438 Frankfurt am Main (Germany); Fernández, J. M.; Tejeda, G.; Moreno, E.; Montero, S. [Laboratory of Molecular Fluid Dynamics, Instituto de Estructura de la Materia, CSIC, Serrano 121, 28006 Madrid (Spain); Tramonto, F.; Galli, D. E. [Laboratorio di Calcolo Parallelo e di Simulazioni di Materia Condensata, Dipartimento di Fisica, Università degli Studi di Milano, Via Celoria 16, 20133 Milano (Italy); Nava, M. [Laboratorio di Calcolo Parallelo e di Simulazioni di Materia Condensata, Dipartimento di Fisica, Università degli Studi di Milano, Via Celoria 16, 20133 Milano (Italy); Computational Science, Department of Chemistry and Applied Biosciences, ETH Zurich, USI Campus, Via Giuseppe Buffi 13, CH-6900 Lugano (Switzerland); Grisenti, R. E. [Institut für Kernphysik, J. W. Goethe-Universität, Max-von-Laue-Str. 1, 60438 Frankfurt am Main (Germany); GSI - Helmholtzzentrum für Schwerionenforschung, Planckstr. 1, 64291 Darmstadt (Germany)

    2015-08-14

    By means of Raman spectroscopy of liquid microjets, we have investigated the crystallization process of supercooled quantum liquid mixtures composed of parahydrogen (pH{sub 2}) or orthodeuterium (oD{sub 2}) diluted with small amounts of neon. We show that the introduction of the Ne impurities affects the crystallization kinetics in terms of a significant reduction of the measured pH{sub 2} and oD{sub 2} crystal growth rates, similarly to what found in our previous work on supercooled pH{sub 2}-oD{sub 2} liquid mixtures [Kühnel et al., Phys. Rev. B 89, 180201(R) (2014)]. Our experimental results, in combination with path-integral simulations of the supercooled liquid mixtures, suggest in particular a correlation between the measured growth rates and the ratio of the effective particle sizes originating from quantum delocalization effects. We further show that the crystalline structure of the mixtures is also affected to a large extent by the presence of the Ne impurities, which likely initiate the freezing process through the formation of Ne-rich crystallites.

  1. Colloidal spirals in nematic liquid crystals.

    Science.gov (United States)

    Senyuk, Bohdan; Pandey, Manoj B; Liu, Qingkun; Tasinkevych, Mykola; Smalyukh, Ivan I

    2015-12-07

    One of the central experimental efforts in nematic colloids research aims to explore how the interplay between the geometry of particles along with the accompanying nematic director deformations and defects around them can provide a means of guiding particle self-assembly and controlling the structure of particle-induced defects. In this work, we design, fabricate, and disperse low-symmetry colloidal particles with shapes of spirals, double spirals, and triple spirals in a nematic fluid. These spiral-shaped particles, which are controlled by varying their surface functionalization to provide tangential or perpendicular boundary conditions of the nematic molecular alignment, are found inducing director distortions and defect configurations with non-chiral or chiral symmetry. Colloidal particles also exhibit both stable and metastable multiple orientational states in the nematic host, with a large number of director configurations featuring both singular and solitonic nonsingular topological defects accompanying them, which can result in unusual forms of colloidal self-assembly. Our findings directly demonstrate how the symmetry of particle-generated director configurations can be further lowered, or not, as compared to the low point group symmetry of solid micro-inclusions, depending on the nature of induced defects while satisfying topological constraints. We show that achiral colloidal particles can cause chiral symmetry breaking of elastic distortions, which is driven by complex three-dimensional winding of induced topological line defects and solitons.

  2. Topology optimization and fabrication of photonic crystal structures

    DEFF Research Database (Denmark)

    Borel, Peter Ingo; Harpøth, Anders; Frandsen, Lars Hagedorn;

    2004-01-01

    Topology optimization is used to design a planar photonic crystal waveguide component resulting in significantly enhanced functionality. Exceptional transmission through a photonic crystal waveguide Z-bend is obtained using this inverse design strategy. The design has been realized in a silicon......-on-insulator based photonic crystal waveguide. A large low loss bandwidth of more than 200 nm for the TE polarization is experimentally confirmed....

  3. Fabrication of Two-Dimensional Photonic Crystals with Triangular Rods by Single-Exposure Holographic Lithography

    Institute of Scientific and Technical Information of China (English)

    PU Yi-Ying; LIANG Guan-Quan; MAO Wei-Dong; DONG Jian-Wen; WANG He-Zhou

    2007-01-01

    We demonstrate a single-exposure holographic fabrication of two-dimensional photonic crystal witn roundband gaps exist in this structure.Our experimental results show that holographic lithography can be used to fabricate photonic crystals not only with various lattice structures but also with various kinds of structures of the atoms,to obtain absolute band gaps or a particular band gap structure.Furthermore,the single-exposure holographic method not only makes the fabrication process simple and convenient but also makes the structures of the atoms more perfect.

  4. Performance testing of log pile photonic crystal fast-fabricated by direct femtosecond laser writing

    Institute of Scientific and Technical Information of China (English)

    Haifeng Yang; Ming Zhou; Juan Dai; Jianke Di; Enlan Zhao

    2008-01-01

    Great efforts has been made on fabricating photonic crystals (PCs) with photonic band gaps (PBGs) during the past decade. Three-dimensional (31)) log pile PC was fabricated fast by direct femtosecond laser writing in ORMOCER. Qualitative analysis of the errors of PC was investigated using the Image Pro Plus. Surface qualities such as bending, distortion, and surface roughness were shown, and the band gap in the infrared wavelength region was observed. Meanwhile, the theory was experimentally verified that the center of PBG diminishes as the crystal lattice period reduces. Therefore, it is possible to fabricate PCs whose band gap range is from the near-infrared to visible wave band.

  5. Colorimetric qualification of shear sensitive liquid crystal coatings

    Science.gov (United States)

    Muratore, Joseph J., Jr.

    1993-08-01

    The work that has been done to date on the Shear Sensitive Liquid Crystal Project demonstrated that cholesteric liquid crystal coatings respond to both the direction and magnitude of a shearing force. The response of the coating is to selectively scatter incident white light into a spectrum of colors. Discernible color changes at a fixed angle of observation and illumination are the result of an applied shear stress. The intention was to be able to convert these observable color patterns from a flow visualization technique into a quantitative tool. One of the earlier intentions was to be able to use liquid crystals in dynamic flow fields. This was assumed possible because liquid crystals had made it possible to visualize transients in surface shear forces. Although the transients were visualized by color changes to an order one micro second, the time response of a coating to align to a shearing force is dependent on the magnitude of the change between its initial and final states. Unfortunately, the response is not instantaneous. It is for this reason any future attempt at quantifying the magnitude and directions of a shearing force are limited to surface shear stress vector fields in three dimensional steady state flows. This limitation does not significantly detract from the utility of liquid crystal coatings. The measurement of skin friction in the study of transition on wings, prediction of drag forces, performance assessment, and the investigation of boundary layer behavior is of great importance in aerodynamics. There exist numerous examples of techniques for the measurement of surface shear stress. Most techniques require arduous calibrations and necessitate extensive preparation of the receiving surfaces. However, the main draw back of instruments such as Preston tubes, hot films, buried wire gages, and floating element balances is that they only provide a point measurement. The advantages of capturing global shear data would be appreciable when compared

  6. Design, fabrication and performance evaluation of a vaporizing liquid microthruster

    Science.gov (United States)

    Kundu, Pijus; Kanti Bhattacharyya, Tarun; Das, Soumen

    2012-02-01

    A recent application domain of MEMS technology is in the development of microthrusters for micro-/nanosatellites. Among the various types of MEMS microthruster developed so far, the vaporizing liquid microthruster (VLM) has been widely explored for its capability to produce continuously variable thrust in the micro-Newton (µN) to mili-Newton (mN) range. This paper reports the design and experimental validation of silicon MEMS VLM consisting of a microcavity, inlet channel and converging-diverging (C-D) in-plane exit nozzle integrated in two micromachined bonded chips and sandwiched between two p-diffused microheaters, located at the top and bottom surface of the device. Structural configuration was designed using simple analytical equations to achieve maximum thrust force by controlling the inlet propellant flow and heater power of VLM in an efficient way. In addition, a 3D model using a computational fluid dynamics technique was constructed to simulate the aft section of VLM for the investigation of its aerodynamic behavior. The device fabrication and testing have been briefly described. The fabricated VLM is capable to produce 1 mN thrust using maximum heater power of 3.6 W at a water flow rate of 2.04 mg s-1 using an in-plane C-D exit nozzle of throat area 130 µm × 100 µm. A detailed thrust force measurement was carried out with the variation of input heater power for different mass flow conditions and exit to throat area ratio of the exit nozzle, and the results were interpreted with the theoretical model. The model gives considerable physical insight in the operation of the VLM. Finally, a performance comparison with other published VLM results indicates that the present design can yield comparatively more thrust force with much less input power. A performance comparison with other published VLM results indicates that the present design can achieve improved performance by integrating two heaters with appropriate chamber volume in respect of propellant flow

  7. Fabrication of photonic crystals with nigrosine-doped poly(MMA-co-DVB-co-MAA) particles.

    Science.gov (United States)

    Zhang, Shuai; Zhao, Xiang-Wei; Xu, Hua; Zhu, Rong; Gu, Zhong-Ze

    2007-12-01

    A convenient approach was developed to fabricate monodisperse nigrosine-doped poly(methyl methacrylate-co-divinylbenzene-co-methacrylic acid) nanoparticles with different cross-linkage by soap-free emulsion polymerization at boiling status and swelling process. The dye-doped nanoparticles were used for the fabrication of colloidal crystal films and beads. It was found that nigrosine dye in the nanoparticles can efficiently depress the light scattering inside the colloidal crystal films and eliminate the iridescent effect in the photonic beads. These results make the colloidal crystals useful in photonic paper, bioassay, and so on.

  8. Fabrication of inverted zinc oxide photonic crystal using sol-gel solution by spin coating method.

    Science.gov (United States)

    Huang, Kuo-Min; Ho, Chong-Lung; Chang, Heng-Jui; Wu, Meng-Chyi

    2013-01-01

    Inverted zinc oxide photonic crystal structures were fabricated from polystyrene sphere (PSS) template using the sol-gel solution of ZnO by spin-coating method. It is easily able to control and fabricate the photonic crystal structures using the self-organized PSS with a size of 193 nm. The inverted ZnO photonic crystal structures observed show the (111) tendency of the hexagonal compact arrangement formation. The resulting structures possess the photonic band gaps in the near-ultraviolet range and exhibit an enhanced photoluminescence spectrum. The technology can effectively increase the light output intensity or efficiency for the applications of optoelectronic devices.

  9. Orientational order parameter studies in two symmetric dimeric liquid crystals - an optical study

    Science.gov (United States)

    Pardhasaradhi, P.; Datta Prasad, P. V.; Madhavi Latha, D.; Pisipati, V. G. K. M.; Padmaja Rani, G.

    2012-12-01

    The optical technique developed by [W. Kuczynski, B. Zywucki, and J. Malecki, Determination of orientational order parameter in various liquid-crystalline phases, Mol. Cryst. Liq. Cryst. 381 (2002), pp. 1-19; B.J. Zywucki and W. Kuczynski, IEEE transactions on optical phenomena - The orientational order in nematic liquid crystals from birefringence measurements, Dielectr. Electr. Insul. 8 (2001), pp. 512-515] is fabricated and used to determine the orientational order parameter in two dimeric liquid crystalline compounds nematic and SmA phases of α,ω-bis(4-alkylanilinebenzylidene-4‧-oxy)alkane (m.OnO.m) homologous series. The compounds studied are 5.O8O.5 and 5.O10O.5 which exhibit nematic and SmA, and nematic phases, respectively. The orientational order parameter in both the phases of nematic and SmA phases of the compound one and the nematic phase of the compound two are obtained using the principle of Newton's rings which gives directly the birefringence, δn of the liquid crystal dimer. The merits of the technique used are presented over the conventional techniques for the determination of orientational order parameter. The results for the two compounds are compared with those values estimated from n e, n o and density using the two internal field models due to Vuks and Neugebauer applicable to nematic phase.

  10. Observation of liquid crystals in heavy petroleum fractions

    Energy Technology Data Exchange (ETDEWEB)

    Reza Bagheri, S.; Gray, Murray R.; McCaffrey, William C.; Shaw, John M. [Department of Chemical Engineering, University of Alberta (Canada)], email: bagheri@ualberta.ca

    2010-07-01

    The presence of liquid crystalline particles in heavy oils was reported in this work. Cross-polarized lights were used to investigate the presence of these particles as a number of bitumen and heavy oil samples were tested. The samples were obtained from different origins and locations mainly Canada, Mexico, and Saudi Arabia. They were subjected to different temperatures and liquid crystalline behavior was monitored throughout the process. It was noticed that liquid crystals started to appear when the samples were heated to a temperature of 330K, and they remained present for days even when the samples were cooled down. However, when the samples were heated beyond 430k, the liquid crystal domain disappeared completely. Moreover, liquid crystalline behavior appeared in the samples when they were subjected to toluene vapor at room temperature. In general it was stated that bitumen and heavy oils exhibit a minimum of three phase changes when they are subjected to temperatures ranging from 150K to 520K.

  11. In-Plane Switching Mode for Liquid Crystal Displays Using a DNA Alignment Layer.

    Science.gov (United States)

    Cha, Yun Jeong; Gim, Min-Jun; Oh, Kyunghwan; Yoon, Dong Ki

    2015-06-24

    We successfully fabricated the in-plane switching mode (IPS) LC display (LCD) based on a double stranded DNA (dsDNA) alignment layer. As widely known, the DNA has the right-handed double helical structure that has naturally grown grooves with a very regular period, which can be used as an alignment layer to control the orientation of liquid crystal (LC) molecules. The LC molecules on this topographical layer of DNA material align obliquely at a specific angle with respect to the direction of DNA chains, providing an instant and convenient tool for the fabrication of the IPS display compared to the conventional ways such as rubbing and mechanical shearing methods. The electro-optical performance and response time of this device were also investigated. Our result will be of great use in further exploration of the electro-optical properties of the other biomaterials.

  12. Near-field lithography on the azobenzene polymer liquid crystal films

    Institute of Scientific and Technical Information of China (English)

    Douguo Zhang; Jian Liu; Zebo Zhang; Li Cao; Anlian Pan; Pei Wang; Yonghua Lu; Ming Bai; Jun Yang; Lin Tang; Jiangying Zhang; Hai Ming; Qijin Zhang

    2005-01-01

    @@ In this article, we reported near-field research on azobenzene polymer liquid crystal films using scanning near-field optical microscopy (SNOM). Optical writing and subsequently topographic reading of the patterns with subwavelength resolution were carried out in our experiments. Nanometer scale dots and lines were successfully fabricated on the films and the smallest dot diameter is about 120 nm. The width of the line fabricated is about 250 nm. This method is also a choice for nanolithography. The mechanism of the surface deformation on the polymer films was briefly analyzed from the viewpoint of gradient force in the optical near field. The intensity distribution of the electric field near the tip aperture was numerically simulated using finite-difference time-domain (FDTD) method and the numerical simulation results were consistent with the experimental results.

  13. Double layers liquid-crystal microlens arrays used in optical switches

    Science.gov (United States)

    Wang, Cheng; Fan, Di; Zhang, Bo; Tong, Qing; Luo, Jun; Lei, Yu; Zhang, Xinyu; Xie, Changsheng

    2015-12-01

    Based on our previous works in liquid-crystal microlens arrays (LCMAs), a new kind of optical switches using the 24×24 fiber arrays coupled with the LCMAs, which have a key dual-mode function of the switches about on and off state and work in visible and infrared range, is proposed and fabricated in this paper. Different with other common LCMAs, this new kind of dual-mode LCMAs includes two layers of control electrodes deposited directly over the surface of the top glass substrate in LC microcavity fabricated. The first layer is the patterned electrode, which is designed into basic circular holes with suitable diameter, and the second is the planar electrode. Both layered electrodes are effectively separated by a thin SiO2 film with a typical thickness of about several micrometers, and then the dual-mode microlenses are driven by applied electrical signals with different root mean square (rms) voltage.

  14. Single crystal micromechanical resonator and fabrication methods thereof

    Energy Technology Data Exchange (ETDEWEB)

    Olsson, Roy H.; Friedmann, Thomas A.; Homeijer, Sara Jensen; Wiwi, Michael; Hattar, Khalid Mikhiel; Clark, Blythe; Bauer, Todd; Van Deusen, Stuart B.

    2016-12-20

    The present invention relates to a single crystal micromechanical resonator. In particular, the resonator includes a lithium niobate or lithium tantalate suspended plate. Also provided are improved microfabrication methods of making resonators, which does not rely on complicated wafer bonding, layer fracturing, and mechanical polishing steps. Rather, the methods allow the resonator and its components to be formed from a single crystal.

  15. Fabrication and Characterization of Colloidal Crystal Thin Films

    Science.gov (United States)

    Rodriguez, I.; Ramiro-Manzano, F.; Meseguer, F.; Bonet, E.

    2011-01-01

    We present a laboratory experiment that allows undergraduate or graduate students to get introduced to colloidal crystal research concepts in an interesting way. Moreover, such experiments and studies can also be useful in the field of crystallography or solid-state physics. The work concerns the growth of colloidal crystal thin films obtained…

  16. Single crystal micromechanical resonator and fabrication methods thereof

    Science.gov (United States)

    Olsson, Roy H.; Friedmann, Thomas A.; Homeijer, Sara Jensen; Wiwi, Michael; Hattar, Khalid Mikhiel; Clark, Blythe; Bauer, Todd; Van Deusen, Stuart B.

    2016-12-20

    The present invention relates to a single crystal micromechanical resonator. In particular, the resonator includes a lithium niobate or lithium tantalate suspended plate. Also provided are improved microfabrication methods of making resonators, which does not rely on complicated wafer bonding, layer fracturing, and mechanical polishing steps. Rather, the methods allow the resonator and its components to be formed from a single crystal.

  17. Fabrication and Characterization of Colloidal Crystal Thin Films

    Science.gov (United States)

    Rodriguez, I.; Ramiro-Manzano, F.; Meseguer, F.; Bonet, E.

    2011-01-01

    We present a laboratory experiment that allows undergraduate or graduate students to get introduced to colloidal crystal research concepts in an interesting way. Moreover, such experiments and studies can also be useful in the field of crystallography or solid-state physics. The work concerns the growth of colloidal crystal thin films obtained…

  18. Crystal growth in a three-phase system: diffusion and liquid-liquid phase separation in lysozyme crystal growth.

    Science.gov (United States)

    Heijna, M C R; van Enckevort, W J P; Vlieg, E

    2007-07-01

    In the phase diagram of the protein hen egg-white lysozyme, a region is present in which the lysozyme solution demixes and forms two liquid phases. In situ observations by optical microscopy show that the dense liquid droplets dissolve when crystals grow in this system. During this process the demixed liquid region retracts from the crystal surface. The spatial distribution of the dense phase droplets present special boundary conditions for Fick's second law for diffusion. In combination with the cylindrical symmetry provided by the kinetically roughened crystals, this system allows for a full numerical analysis. Using experimental data for setting the boundary conditions, a quasi-steady-state solution for the time-dependent concentration profile was shown to be valid. Comparison of kinetically rough growth in a phase separated system and in a nonseparated system shows that the growth kinetics for a three-phase system differs from a two-phase system, in that crystals grow more slowly but the duration of growth is prolonged.

  19. Anomalous crystallization as a signature of the fragile-to-strong transition in metallic glass-forming liquids.

    Science.gov (United States)

    Yang, Xiunan; Zhou, Chao; Sun, Qijing; Hu, Lina; Mauro, John C; Wang, Chunzhen; Yue, Yuanzheng

    2014-08-28

    We study the fragile-to-strong (F-S) transition of metallic glass-forming liquids (MGFLs) by measuring the thermal response during annealing and dynamic heating of La55Al25Ni5Cu15 glass ribbons fabricated at different cooling rates. We find that the glasses fabricated in the intermediate regime of cooling rates (15-25 m/s) exhibit an anomalous crystallization behavior upon reheating as compared to the glasses formed at other cooling rates. This anomalous crystallization behavior implies the existence of a thermodynamic F-S transition, could be used as an alternative method for detecting the F-S transition in MGFLs, and sheds light on the structure origin of the F-S transition. This work also contributes to obtaining a general thermodynamic picture of the F-S transition in supercooled liquids.

  20. Fast fringe-field switching of a liquid crystal cell by two-dimensional confinement with virtual walls

    Science.gov (United States)

    Choi, Tae-Hoon; Oh, Seung-Won; Park, Young-Jin; Choi, Yeongyu; Yoon, Tae-Hoon

    2016-06-01

    We report a simple method for reducing the response time of a fringe-field switching liquid crystal cell by using two-dimensional confinement of the liquid crystals. Through both numerical calculations and experiments, we show that the switching speed can be increased by several fold in a fringe-field switching cell by simply using a rubbing angle of zero, which causes virtual walls to be built when an electric field is applied between the interdigitated electrodes and the common electrode, without requiring additional fabrication steps or complicated drive schemes. Furthermore, the devices fabricated with this method exhibit a reduced color shift and excellent dynamic stability, even with a high applied voltage and under external pressure.

  1. Polymerization in Liquid Crystal Medium: Preparation of Polythiophene Derivatives Bearing a Bulky Pyrimidine Substituent

    Directory of Open Access Journals (Sweden)

    Hiromasa Goto

    2010-10-01

    Full Text Available We carried out polycondensation of monomers bearing a bulky pyrimidine substituent in a liquid crystal solvent. The resultant polymers formed nematic liquid crystals. The polymers prepared in liquid crystals had higher coplanarity than the polymers prepared in toluene. This can be due to the fact that the ordered medium of the liquid crystal produces an aggregated structure with well-developed π-stacking between the main chains. The present results demonstrated that polymerization of bulky monomers is possible in liquid crystal solvents.

  2. Orientational dynamics and energy landscape features of thermotropic liquid crystals: An analogy with supercooled liquids

    Indian Academy of Sciences (India)

    Biman Jana; Biman Bagchi

    2007-09-01

    Recent optical kerr effect (OKE) studies have revealed that orientational relaxation of rodlike nematogens near the isotropic-nematic (I-N) phase boundary and also in the nematic phase exhibit temporal power law decay at intermediate times. Such behaviour has drawn an intriguing analogy with supercooled liquids. Here, we have investigated the single-particle and collective orientational dynamics of a family of model system of thermotropic liquid crystals using extensive computer simulations. Several remarkable features of glassy dynamics are on display including non-exponential relaxation, dynamical heterogeneity, and non-Arrhenius temperature dependence of the orientational relaxation time. Over a temperature range near the I-N phase boundary, the system behaves like a fragile glass-forming liquid. Using proper scaling, we construct the usual relaxation time versus inverse temperature plot and explicitly demonstrate that one can successfully define a density dependent fragility of liquid crystals. The fragility of liquid crystals shows a temperature and density dependence which is remarkably similar to the fragility of glass forming supercooled liquids. Energy landscape analysis of inherent structures shows that the breakdown of the Arrhenius temperature dependence of relaxation rate occurs at a temperature that marks the onset of the growth of the depth of the potential energy minima explored by the system.

  3. Fluorinated Azobenzenes for Shape-Persistent Liquid Crystal Polymer Networks.

    Science.gov (United States)

    Iamsaard, Supitchaya; Anger, Emmanuel; Aßhoff, Sarah Jane; Depauw, Alexis; Fletcher, Stephen P; Katsonis, Nathalie

    2016-08-16

    Liquid crystal polymer networks respond with an anisotropic deformation to a range of external stimuli. When doped with molecular photoswitches, these materials undergo complex shape modifications under illumination. As the deformations are reversed when irradiation stops, applications where the activated shape is required to have thermal stability have been precluded. Previous attempts to incorporate molecular switches into thermally stable photoisomers were unsuccessful at photogenerating macroscopic shapes that are retained over time. Herein, we show that to preserve photoactivated molecular deformation on the macroscopic scale, it is important not only to engineer the thermal stability of the photoswitch but also to adjust the cross-linking density in the polymer network and to optimize the molecular orientations in the material. Our strategy resulted in materials containing fluorinated azobenzenes that retain their photochemical shape for more than eight days, which constitutes the first demonstration of long-lived photomechanical deformation in liquid-crystal polymer networks.

  4. Electrically tuned photoluminescence in large pitch cholesteric liquid crystal

    Energy Technology Data Exchange (ETDEWEB)

    Middha, Manju, E-mail: kkraina@gmail.com; Kumar, Rishi, E-mail: kkraina@gmail.com; Raina, K. K., E-mail: kkraina@gmail.com [School of Physics and Materials Science, Thapar University, Patiala-147004, Punjab (India)

    2014-04-24

    Cholesteric liquid crystals are known as 1-D photonic band gap materials due to their periodic helical supramolecular structure and larger birefringence. Depending upon the helical twisted pitch length, they give the characteristic contrast due to selective Bragg reflections when viewed through the polarizing optical microscope and hence affect the electro-optic properties. So the optimization of chiral dopant concentration in nematic liquid crystal leads to control the transmission of polarized light through the microscope. Hence transmission based polarizing optical microscope is used for the characterization of helical pitch length in the optical texture. The unwinding of helical pitch was observed with the application of electric field which affects the intensity of photoluminescence.

  5. Studies on Nematic Liquid Crystal Using Spin Wave Theory

    Institute of Scientific and Technical Information of China (English)

    LIUJian-Jun; LIUXiao-Jing; SHENMan; YANGGuo-Chen

    2004-01-01

    A spin wave theory is proposed to study nematic liquid crystals. Since the orientation of the molecular long axis and the angular momentum of the molecule rotating around its long axis have the same direction, operators can be introduced to research the nematic liquid crystal. By transforming the intermolecular interaction potential,the Hamiltonian of the system has the same form as that of the ferromagnetic substance. The relation of the order parameters to the reduced temperature can be obtained. It is in good agreement with the experimental results in the low temperature region. In the high temperature region close to the transition point, by using the Hamiltonian, the transition point can be obtained, which is near to the Maier-Saupe's result.

  6. Thermodynamic properties of a liquid crystal carbosilane dendrimer

    Science.gov (United States)

    Samosudova, Ya. S.; Markin, A. V.; Smirnova, N. N.; Ogurtsov, T. G.; Boiko, N. I.; Shibaev, V. P.

    2016-11-01

    The temperature dependence of the heat capacity of a first-generation liquid crystal carbosilane dendrimer with methoxyphenyl benzoate end groups is studied for the first time in the region of 6-370 K by means of precision adiabatic vacuum calorimetry. Physical transformations are observed in this interval of temperatures, and their standard thermodynamic characteristics are determined and discussed. Standard thermodynamic functions C p ° ( T), H°( T) - H°(0), S°( T) - S°(0), and G°( T) - H°(0) are calculated from the obtained experimental data for the region of T → 0 to 370 K. The standard entropy of formation of the dendrimer in the partially crystalline state at T = 298.15 K is calculated, and the standard entropy of the hypothetic reaction of its synthesis at this temperature is estimated. The thermodynamic properties of the studied dendrimer are compared to those of second- and fourth-generation liquid crystal carbosilane dendrimers with the same end groups studied earlier.

  7. Relativistic Lagrangian model of a nematic liquid crystal

    CERN Document Server

    Obukhov, Yuri N; Rubilar, Guillermo F

    2012-01-01

    We develop a relativistic variational model for a nematic liquid crystal interacting with the electromagnetic field. The constitutive relation for an anisotropic uniaxial diamagnetic and dielectric medium is analyzed. We discuss light wave propagation in this moving uniaxial medium, for which the corresponding optical metrics are identified explicitly. A Lagrangian for the coupled system of a nematic liquid crystal and the electromagnetic field is constructed. We derive a complete set of equations of motion for the system. The canonical energy-momentum and spin tensors are systematically obtained. We compare our results with those within the non-relativistic models. As an application of our general formalism, we discuss the so-called Abraham-Minkowski controversy on the momentum of light in a medium.

  8. Ordering Quantum Dot Clusters via Nematic Liquid Crystal Defects

    Science.gov (United States)

    Rodarte, Andrea; Pandolfi, R.; Hirst, L. S.; Ghosh, S.

    2012-11-01

    Nematic liquid crystal (LC) materials can be used to create ordered clusters of CdSe/ZnS core/shell quantum dots (QDs) from a homogeneous isotropic dispersion. At the phase transition, the ordered domains of nematic LC expel the majority of dispersed QDs into the isotropic domains. The final LC phase produces a series of QD clusters that are situated at the defect points of the liquid crystal texture. Lower concentrations of QDs are organized in a network throughout the LC matrix that originates from the LC phase transition. Inside the QD clusters the inter-particle distance enables efficient energy transfer from high energy dots to lower energy dots. Because the QD clusters form at defect sites, the location of the clusters can be preselected by seeding the LC cell with defect nucleation points.

  9. High Performance Negative Dielectric Anisotropy Liquid Crystals for Display Applications

    Directory of Open Access Journals (Sweden)

    Xiaolong Song

    2013-09-01

    Full Text Available We review recent progress in the development of high birefringence (Δn ≥ 0.12 negative dielectric anisotropy (Δε < 0 liquid crystals (LCs for direct-view and projection displays. For mobile displays, our UCF-N2 (low viscosity, negative Δε, high Δn based homogeneous alignment fringe-field switching (called n-FFS mode exhibits superior performance to p-FFS in transmittance, single gamma curve, cell gap insensitivity, and negligible flexoelectric effect. For projection displays using a vertical alignment liquid-crystal-on-silicon (VA LCOS, our high birefringence UCF-N3 mixture enables a submillisecond gray-to-gray response time, which is essential for color sequential displays without noticeable color breakup. Our low viscosity UCF-N2 also enables multi-domain VA displays to use a thinner cell gap for achieving faster response time.

  10. Rheological Properties of T-Shaped Liquid Crystals

    Science.gov (United States)

    Diorio, Nicholas; Bailey, Christopher; Tschierske, Carsten; Jákli, Antal

    2009-03-01

    The rheological properties of ``T-shaped'' liquid crystal molecules are investigated. These T-shaped molecules show novel liquid crystal phases with a variety of lamellar and columnar structures [1,2,3]. We examined the viscoelastic behavior of these materials over varying temperatures and shear rates. Because of the limited quantities of these materials, a home- made nanoliter rheometer [4] is used that only requires a few nanoliters of material. [1] M. Prehm, X.H. Cheng, S. Diele, M. K. Das, and C. Tschierske; J. AM. CHEM. SOC. 2002, 124, 12072-12073 [2] X.Cheng, M. K. Das, U. Baumeister, S. Diele, and C. Tschierske; J. AM. CHEM. SOC. 2004, 126, 12930-12940 [3] M. Prehm, F. Liu, U. Baumeister, X. Zeng, G. Ungar, and C. Tschierske; Angew. Chem. Int. Ed. 2007, 46, 7972 -7975 [4] C. Bailey, A. J'akli, ``Broad range nanoliter rheometer'', Provisional patent , KSU 325 (2008)

  11. Modeling texture transitions in cholesteric liquid crystal droplets

    Science.gov (United States)

    Selinger, Robin; Gimenez-Pinto, Vianney; Lu, Shin-Ying; Selinger, Jonathan; Konya, Andrew

    2012-02-01

    Cholesteric liquid crystals can be switched reversibly between planar and focal-conic textures, a property enabling their application in bistable displays, liquid crystal writing tablets, e-books, and color switching ``e-skins.'' To explore voltage-pulse induced switching in cholesteric droplets, we perform simulation studies of director dynamics in three dimensions. Electrostatics calculations are solved at each time step using an iterative relaxation method. We demonstrate that as expected, a low amplitude pulse drives the transition from planar to focal conic, while a high amplitude pulse drives the transition from focal conic back to the planar state. We use the model to explore the effects of droplet shape, aspect ratio, and anchoring conditions, with the goal of minimizing both response time and energy consumption.

  12. Thermal expansion accompanying the glass-liquid transition and crystallization

    Directory of Open Access Journals (Sweden)

    M. Q. Jiang

    2015-12-01

    Full Text Available We report the linear thermal expansion behaviors of a Zr-based (Vitreloy 1 bulk metallic glass in its as-cast, annealed and crystallized states. Accompanying the glass-liquid transition, the as-cast Vitreloy 1 shows a continuous decrease in the thermal expansivity, whereas the annealed glass shows a sudden increase. The crystallized Vitreloy 1 exhibits an almost unchanged thermal expansivity prior to its melting. Furthermore, it is demonstrated that the nucleation of crystalline phases can induce a significant thermal shrinkage of the supercooled liquid, but with the growth of these nuclei, the thermal expansion again dominates. These results are explained in the framework of the potential energy landscape, advocating that the configurational and vibrational contributions to the thermal expansion of the glass depend on both, structure and temperature.

  13. Compound liquid crystal microlens array with convergent and divergent functions.

    Science.gov (United States)

    Kang, Shengwu; Zhang, Xinyu

    2016-04-20

    Based on the common liquid crystal microlens, a new compound structure for a liquid crystal (LC) microlens array is proposed. The structure consists of two sub LC microlens arrays with properties of light divergence and convergence. The structure has two LC layers: one to form the positive sub lens, one for the negative. The patterned electrode and plane electrode are used in both sub microlens arrays. When two sub microlens arrays are electrically controlled separately, they can diverge or converge the incident light, respectively. As two sub microlens arrays are both applied on the voltage, the focal length of the compound LC microlens becomes larger than that of the LC microlens with a single LC layer. Another feature of a compound LC microlens array is that it can make the target contour become visible under intense light. The mechanisms are described in detail, and the experimental data are given.

  14. STRUCTURE FORMATION OF COLLOIDS IN NEMATIC LIQUID CRYSTALS

    Directory of Open Access Journals (Sweden)

    B.I.Lev

    2003-01-01

    Full Text Available We investigated the behaviour of colloidal particles suspended in nematic liquid crystals. These colloidal particles interact through elastic deformation of the nematic director field which can result in nontrivial collective behavior, leading to the formation of spatially modulated structures. In this paper, the formation of lattice structures is described both by computer simulations and by analytical theory. Effective interactions of the pairs of spherical macroparticles suspended in nematic liquid crystals have been suggested by many authors. Using these pairwise interactions, spatial structures are obtained by means of dynamic simulations. We have suggested a number of possible structures, which may be formed in multi-macroparticle systems. Regions of temperatures and concentrations are determined in which such a structure might appear.

  15. Theory of nanoparticles doped in ferroelectric liquid crystals

    Science.gov (United States)

    Lahiri, T.; Pal Majumder, T.; Ghosh, N. K.

    2013-02-01

    We developed a theory for the statistical mechanics of nanoparticles doped in ferroelectric liquid crystals (FLC). The presence of nanoparticles in FLC medium creates strong local fields that produce large alignment effects over the distribution of the nanosuspensions. Considering these local field effects, we presented a modified Landau free energy to calculate the electro-optic properties of the system. Then, we investigated the response of the nanoparticles doped FLC to an applied electric field. The variations in the polarization and the tilt angle show marked differences with the pure FLC medium. The rotational viscosity of the system is also calculated with its possible variation in temperature and applied field. Then, we conjectured on the possibility of shift in transition temperature, which is supposed to be induced by an electrostatic interaction between the nanoparticles and the liquid crystal molecules. Finally, strong experimental evidence is presented in favor of our results emerged from this theoretical model.

  16. Domain Structures in Nematic Liquid Crystals on a Polycarbonate Surface

    Directory of Open Access Journals (Sweden)

    Vasily F. Shabanov

    2013-08-01

    Full Text Available Alignment of nematic liquid crystals on polycarbonate films obtained with the use of solvents with different solvations is studied. Domain structures occurring during the growth on the polymer surface against the background of the initial thread-like or schlieren texture are demonstrated. It is established by optical methods that the domains are stable formations visualizing the polymer surface structures. In nematic droplets, the temperature-induced transition from the domain structure with two extinction bands to the structure with four bands is observed. This transition is shown to be caused by reorientation of the nematic director in the liquid crystal volume from the planar alignment to the homeotropic state with the pronounced radial configuration of nematic molecules on the surface. The observed textures are compared with different combinations of the volume LC orientations and the radial distribution of the director field and the disclination lines at the polycarbonate surface.

  17. High-speed imaging polarimetry using liquid crystal modulators

    Directory of Open Access Journals (Sweden)

    Ambs P.

    2010-06-01

    Full Text Available This paper deals with dynamic polarimetric imaging techniques. The basics of modern polarimetry have been known for one and a half century, but no practical high-speed implementation providing the full polarization information is currently available. Various methods are reviewed which prove to be a trade-off between the complexity of the optical set-up and the amount of polarimetric information they provide (ie the number of components of the Stokes vector. Techniques using liquid crystal devices, incepted in the late 1990's, are emphasized. Optical set-ups we implemented are presented. We particularly focus on high-speed techniques (i.e. faster than 200 Hz using ferroelectric liquid crystal devices.

  18. A numerical method for eigenvalue problems in modeling liquid crystals

    Energy Technology Data Exchange (ETDEWEB)

    Baglama, J.; Farrell, P.A.; Reichel, L.; Ruttan, A. [Kent State Univ., OH (United States); Calvetti, D. [Stevens Inst. of Technology, Hoboken, NJ (United States)

    1996-12-31

    Equilibrium configurations of liquid crystals in finite containments are minimizers of the thermodynamic free energy of the system. It is important to be able to track the equilibrium configurations as the temperature of the liquid crystals decreases. The path of the minimal energy configuration at bifurcation points can be computed from the null space of a large sparse symmetric matrix. We describe a new variant of the implicitly restarted Lanczos method that is well suited for the computation of extreme eigenvalues of a large sparse symmetric matrix, and we use this method to determine the desired null space. Our implicitly restarted Lanczos method determines adoptively a polynomial filter by using Leja shifts, and does not require factorization of the matrix. The storage requirement of the method is small, and this makes it attractive to use for the present application.

  19. Photonic crystal enhancement of a homogeneous fluorescent assay using submicron fluid channels fabricated by E-jet patterning.

    Science.gov (United States)

    Tan, Yafang; Sutanto, Erick; Alleyne, Andrew G; Cunningham, Brian T

    2014-04-01

    We demonstrate the enhancement of a liquid-based homogenous fluorescence assay using the resonant electric fields from a photonic crystal (PC) surface. Because evanescent fields are confined to the liquid volume nearest to the photonic crystal, we developed a simple approach for integrating a PC fabricated on a silicon substrate within a fluid channel with submicron height, using electrohydrodynamic jet (e-jet) printing of a light-curable epoxy adhesive to define the fluid channel pattern. The PC is excited by a custom-designed compact instrument that illuminates the PC with collimated light that precisely matches the resonant coupling condition when the PC is covered with aqueous media. Using a molecular beacon nucleic acid fluorescence resonant energy transfer (FRET) probe for a specific miRNA sequence, we demonstrate an 8× enhancement of the fluorescence emission signal, compared to performing the same assay without exciting resonance in the PC detecting a miRNA sequence at a concentration of 62 nM from a liquid volume of only ∼20 nL. The approach may be utilized for any liquid-based fluorescence assay for applications in point-of-care diagnostics, environmental monitoring, or pathogen detection.

  20. Optical tuning of three-dimensional photonic crystals fabricated by femtosecond direct writing

    Science.gov (United States)

    McPhail, Dennis; Straub, Martin; Gu, Min

    2005-08-01

    In this letter, we report on an optically tunable three-dimensional photonic crystal that exhibits main gaps in the 3-4μm range. The photonic crystal is manufactured via a femtosecond direct writing technique. Optical tuning is achieved by a luminary polling technique with a low-power polarized laser beam. The refractive index variation resulting from liquid-crystal rotation causes a shift in the photonic band gap of up to 65 nm with an extinction of transmission of up to 70% in the stacking direction. Unlike other liquid-crystal tuning techniques where a pregenerated structure is infiltrated, this optical tuning method is a one-step process that allows arbitrary structures to be written into a solid liquid-crystal-polymer composite and leads to a high dielectric contrast.

  1. Activating photonic crystal membrane nanocavities by infiltrating with liquid crystals or luminescent colloidal nanocrystals

    NARCIS (Netherlands)

    Dündar, M.A.; Christova, C.; Silov, A.Y.; Karouta, F.; Nötzel, R.; Wienk, M.; Salemink, H.; Van der Heijden, R.W.

    2010-01-01

    Liquid crystal (LC, Merk 5 CB) is infiltrated into active, InAs quantum dots embedded, InGaAsP membrane type nanocavities to investigate the possible effect of the LC orientation on active cavity tuning. The tuning is demonstrated thermally and thermo-optically. The thermal tuning showed that the ca

  2. Activating photonic crystal membrane nanocavities by infiltrating with liquid crystals or luminescent colloidal nanocrystals

    NARCIS (Netherlands)

    Dündar, M.A.; Christova, C.; Silov, A.Y.; Karouta, F.; Nötzel, R.; Wienk, M.; Salemink, H.; Van der Heijden, R.

    2010-01-01

    Liquid crystal (LC, Merk 5 CB) is infiltrated into active, InAs quantum dots embedded, InGaAsP membrane type nanocavities to investigate the possible effect of the LC orientation on active cavity tuning. The tuning is demonstrated thermally and thermo-optically. The thermal tuning showed that the c

  3. Thermal modeling of laser-addressed liquid-crystal displays

    Science.gov (United States)

    Evans, K. E.; Nkansah, M. A.

    1990-06-01

    Optical-absorption calculations and finite-element methods are used to calculate time-dependent temperature profiles in two contrasting laser-addressed liquid-crystal displays. It is shown that the presence of conducting electrode layers has a significant effect on the temperature profiles both by affecting the optical-absorption characteristics of the cell and the resulting thermal conductivity. It is shown that efficient optical absorption does not necessarily result in the best cell-addressing performance.

  4. Low-Absorption Liquid Crystals for Infrared Beam Steering

    Science.gov (United States)

    2015-09-30

    absorption coefficient and d is the LC layer thickness . Let us take a~!0/cm as an example. For a 10-|j,m- thick LC layer, ad=0.01 and the transmittance...remains 99%. However, if the LC layer thickness (or effective optical path length) increases, then the absorption will increase exponentially, as Eq. (1...weight-and-power, 2) increasing mean-time-between- failure, and 3) reducing system complexity. Beam steering based on liquid crystal ( LC ) optical phase

  5. High figure-of-merit compact phase shifters based on liquid crystal material for 1-10 GHz applications

    Science.gov (United States)

    Cai, Longzhu; Xu, Huan; Li, Jinfeng; Chu, Daping

    2017-01-01

    A liquid crystal (LC) based tunable microstrip line (ML) phase shifter featuring high performance is presented. The experimental results show an electrically tunable differential phase up to 360° at 10 GHz with an overall insertion loss impedance matching structure is applied, and the measured return loss is considerably improved. The FoM and phase tuning property of the fabricated device as optimized are compared with the state-of-art results published recently and show better performance for both of them.

  6. Liquid crystal film development for plasma mirrors and waveplates

    Science.gov (United States)

    Cochran, G. E.; Poole, P. L.; Willis, C.; Hanna, R. J.; Pytel, K.; Sullivan, K. S.; Andereck, C. D.; Schumacher, D. W.

    2015-11-01

    Many laser-plasma phenomena currently under study depend critically on the quality of the pulse contrast. Costly sacrificial plasma mirrors are now commonly used to improve the temporal laser contrast before target interaction, especially for ion acceleration where high contrast is necessary to achieve interesting new mechanisms. Liquid crystal films were originally developed as variable thickness thin-film targets, and were demonstrated for this purpose in. Varying film formation parameters such as volume, temperature, and draw speed allows thickness control between 10 nm and several 10s of microns, in-situ and under vacuum. Development since that initial work has allowed large area films to be formed, several cm2 in extent, with the same thickness range. The molecular flatness of a freely suspended film renders these films excellent low-cost plasma mirrors, given appropriate formation control. Additionally, the birefringence of the liquid crystal used here permits these films to be used as large area zero-order waveplates at the appropriate thickness. Details on the current state of liquid crystal film application development, including a >1 Hz small area film formation device, will be presented. This work was performed with support from the DARPA PULSE program through a grant from AMRDEC and by the NNSA under contract DE-NA0001976.

  7. Nanoconfinement-induced structures in chiral liquid crystals.

    Science.gov (United States)

    Melle, Michael; Theile, Madlona; Hall, Carol K; Schoen, Martin

    2013-08-28

    We employ Monte Carlo simulations in a specialized isothermal-isobaric and in the grand canonical ensemble to study structure formation in chiral liquid crystals as a function of molecular chirality. Our model potential consists of a simple Lennard-Jones potential, where the attractive contribution has been modified to represent the orientation dependence of the interaction between a pair of chiral liquid-crystal molecules. The liquid crystal is confined between a pair of planar and atomically smooth substrates onto which molecules are anchored in a hybrid fashion. Hybrid anchoring allows for the formation of helical structures in the direction perpendicular to the substrate plane without exposing the helix to spurious strains. At low chirality, we observe a cholesteric phase, which is transformed into a blue phase at higher chirality. More specifically, by studying the unit cell and the spatial arrangement of disclination lines, this blue phase can be established as blue phase II. If the distance between the confining substrates and molecular chirality are chosen properly, we see a third structure, which may be thought of as a hybrid, exhibiting mixed features of a cholesteric and a blue phase.

  8. Nanoconfinement-Induced Structures in Chiral Liquid Crystals

    Directory of Open Access Journals (Sweden)

    Carol K. Hall

    2013-08-01

    Full Text Available We employ Monte Carlo simulations in a specialized isothermal-isobaric and in the grand canonical ensemble to study structure formation in chiral liquid crystals as a function of molecular chirality. Our model potential consists of a simple Lennard-Jones potential, where the attractive contribution has been modified to represent the orientation dependence of the interaction between a pair of chiral liquid-crystal molecules. The liquid crystal is confined between a pair of planar and atomically smooth substrates onto which molecules are anchored in a hybrid fashion. Hybrid anchoring allows for the formation of helical structures in the direction perpendicular to the substrate plane without exposing the helix to spurious strains. At low chirality, we observe a cholesteric phase, which is transformed into a blue phase at higher chirality. More specifically, by studying the unit cell and the spatial arrangement of disclination lines, this blue phase can be established as blue phase II. If the distance between the confining substrates and molecular chirality are chosen properly, we see a third structure, which may be thought of as a hybrid, exhibiting mixed features of a cholesteric and a blue phase.

  9. The mathematics of instabilities in smectic C liquid crystals

    CERN Document Server

    Anderson, D A

    2001-01-01

    field. The equilibrium equation which we then obtain is not tractable explicitly due to the form of the sinusoidal nonlinearity which appears in it. We therefore solve a simplified approximating dynamic equation as well as the full sinusoidal nonlinearity case numerically. In both cases the linear stability of the equilibrium solution is examined. Finally, in Chapter 6 we consider the layer deformations in a cylindrical sample of smectic A liquid crystal when a magnetic field is applied across the circular cross section of the cylinder. A physically motivated solution is obtained, the energy of which is then considered. The thesis finishes with some conclusions in Chapter 7. The theoretical effects of applying a magnetic or electric field to samples of smectic A and smectic C sup * liquid crystals are studied in this thesis. In Chapter 2 general background material on liquid crystals is introduced as well as the continuum theory which we shall use in subsequent chapters. We consider a planar sample of ferroel...

  10. Transparent nematic phase in a liquid-crystal-based microemulsion.

    Science.gov (United States)

    Yamamoto, J; Tanaka, H

    2001-01-18

    Complex fluids are usually produced by mixing together several distinct components, the interactions between which can give rise to unusual optical and rheological properties of the system as a whole. For example, the properties of microemulsions (composed of water, oil and surfactants) are determined by the microscopic structural organization of the fluid that occurs owing to phase separation of the component elements. Here we investigate the effect of introducing an additional organizing factor into such a fluid system, by replacing the oil component of a conventional water-in-oil microemulsion with an intrinsically anisotropic fluid--a nematic liquid crystal. As with the conventional case, the fluid phase-separates into an emulsion of water microdroplets (stabilized by the surfactant as inverse micelles) dispersed in the 'oil' phase. But the properties are further influenced by a significant directional coupling between the liquid-crystal molecules and the surfactant tails that emerge (essentially radially) from the micelles. The result is a modified bulk-liquid crystal that is an ordered nematic at the mesoscopic level, but which does not exhibit the strong light scattering generally associated with bulk nematic order: the bulk material here is essentially isotropic and thus transparent.

  11. Liquid crystal foil for the detection of breast cancer

    Science.gov (United States)

    Biernat, Michał; Trzyna, Marcin; Byszek, Agnieszka; Jaremek, Henryk

    2016-09-01

    Breast cancer is the most common malignant tumor in females around the world, representing 25.2% of all cancers in women. About 1.7 million women were diagnosed with breast cancer worldwide in 2012 with a death rate of about 522,0001,2. The most frequently used methods in breast cancer screening are imaging methods, i.e. ultrasonography and mammography. A common feature of these methods is that they inherently involve the use of expensive and advanced equipment. The development of advanced computer systems allowed for the continuation of research started already in the 1980s3 and the use of contact thermography in breast cancer screening. The physiological basis for the application of thermography in medical imaging diagnostics is the so-called dermothermal effect related to higher metabolism rate around focal neoplastic lesion. This phenomenon can occur on breast surface as localized temperature anomalies4. The device developed by Braster is composed of a detector that works on the basis of thermotropic liquid crystals, image acquisition device and a computer system for image data processing and analysis. Production of the liquid crystal detector was based on a proprietary CLCF technology (Continuous Liquid Crystal Film). In 2014 Braster started feasibility study to prove that there is a potential for artificial intelligence in early breast cancer detection using Braster's proprietary technology. The aim of this study was to develop a computer system, using a client-server architecture, to an automatic interpretation of thermographic pictures created by the Braster devices.

  12. IR Sensor Synchronizing Active Shutter Glasses for 3D HDTV with Flexible Liquid Crystal Lenses

    Directory of Open Access Journals (Sweden)

    Jeong In Han

    2013-12-01

    Full Text Available IR sensor synchronizing active shutter glasses for three-dimensional high definition television (3D HDTV were developed using a flexible liquid crystal (FLC lens. The FLC lens was made on a polycarbonate (PC substrate using conventional liquid crystal display (LCD processes. The flexible liquid crystal lens displayed a maximum transmission of 32% and total response time of 2.56 ms. The transmittance, the contrast ratio and the response time of the flexible liquid crystal lens were superior to those of glass liquid crystal lenses. Microcontroller unit and drivers were developed as part of a reception module with power supply for the IR sensor synchronizing active shutter glasses with the flexible liquid crystal lens prototypes. IR sensor synchronizing active shutter glasses for 3D HDTV with flexible liquid crystal lenses produced excellent 3D images viewing characteristics.

  13. Reversible Nanoparticle Cubic Lattices in Blue Phase Liquid Crystals.

    Science.gov (United States)

    Gharbi, Mohamed Amine; Manet, Sabine; Lhermitte, Julien; Brown, Sarah; Milette, Jonathan; Toader, Violeta; Sutton, Mark; Reven, Linda

    2016-03-22

    Blue phases (BPs), a distinct class of liquid crystals (LCs) with 3D periodic ordering of double twist cylinders involving orthogonal helical director twists, have been theoretically studied as potential templates for tunable colloidal crystals. Here, we report the spontaneous formation of thermally reversible, cubic crystal nanoparticle (NP) assemblies in BPs. Gold NPs, functionalized to be highly miscible in cyanobiphenyl-based LCs, were dispersed in BP mixtures and characterized by polarized optical microscopy and synchrotron small-angle X-ray scattering (SAXS). The NPs assemble by selectively migrating to periodic strong trapping sites in the BP disclination lines. The NP lattice, remarkably robust given the small particle size (4.5 nm diameter), is commensurate with that of the BP matrix. At the BP I to BP II phase transition, the NP lattice reversibly switches between two different cubic structures. The simultaneous presence of two different symmetries in a single material presents an interesting opportunity to develop novel dynamic optical materials.

  14. Structure, Hydrodynamics, and Phase Transition of Freely Suspended Liquid Crystals

    Science.gov (United States)

    Clark, Noel A.

    2000-01-01

    Smectic liquid crystals are phases of rod shaped molecules organized into one dimensionally (1D) periodic arrays of layers, each layer being between one and two molecular lengths thick. In the least ordered smectic phases, the smectics A and C, each layer is a two dimensional (2D) liquid. Additionally there are a variety of more ordered smectic phases having hexatic short range translational order or 2D crystalline quasi long range translational order within the layers. The inherent fluid-layer structure and low vapor pressure of smectic liquid crystals enable the long term stabilization of freely suspended, single component, layered fluid films as thin as 30A, a single molecular layer. The layering forces the films to be an integral number of smectic layers thick, quantizing their thickness in layer units and forcing a film of a particular number of layers to be physically homogeneous with respect to its layer structure over its entire area. Optical reflectivity enables the precise determination of the number of layers. These ultrathin freely suspended liquid crystal films are structures of fundamental interest in condensed matter and fluid physics. They are the thinnest known stable condensed phase fluid structures and have the largest surface-to-volume ratio of any stable fluid preparation, making them ideal for the study of the effects of reduced dimensionality on phase behavior and on fluctuation and interface phenomena. Their low vapor pressure and quantized thickness enable the effective use of microgravity to extend the study of basic capillary phenomena to ultrathin fluid films. Freely suspended films have been a wellspring of new liquid crystal physics. They have been used to provide unique experimental conditions for the study of condensed phase transitions in two dimensions. They are the only system in which the hexatic has been unambiguously identified as a phase of matter, and the only physical system in which fluctuations of a 2D XY system and

  15. Liquid Between Macromolecules in Protein Crystals: Static Versus Dynamics

    Science.gov (United States)

    Chernov, A. A.

    2005-01-01

    Protein crystals are so fragile that they often can not be handled by tweezers. Indeed, measurements of the Young modulus, E, of lysozyme crystals resulted in E approx. equals 0.1 - 1 GPa, the lower figures, 0.1 - 0.5 GPa, being obtained from triple point bending of as-grown and not cross-linked crystals sitting in solution. The bending strength was found to be approx.10(exp -2) E. On the other hand, ultrasound speed and Mandelstam-Raman-Brilloin light scattering experiments led to much higher figures, E approx. equals 2.7 GPa. The lower figures for E were found from static or low frequency crystal deformations measurements, while the higher moduli are based on high frequency lattice vibrations, 10(exp 7) - 10(exp 10) 1/s. The physical reason for the about an order of magnitude discrepancy is in different behavior of water filling space between protein molecules. At slow lattice deformation, the not-bound intermolecular water has enough time to flow from the compressed to expanded regions of the deformed crystal. At high deformation frequencies in the ultra- and hypersound waves, the water is confined in the intermolecular space and, on that scale, behaves like a solid, thus contributing to the elastic crystal moduli. In this case, the reciprocal crystal modulus is expected to be an average of the water protein and water compressibilities (reciprocal compressibilities): the bulk modulus for lysozyme is 26 GPa, for water it is 7 GPa. Anisotropy of the crystal moduli comes from intermolecular contacts within the lattice while the high frequency hardness comes from the bulk of protein molecules and water bulk moduli. These conclusions are based on the analysis of liquid flow in porous medium to be presented.

  16. Electron transport across metal/discotic liquid crystal interfaces

    Science.gov (United States)

    Boden, N.; Bushby, R. J.; Clements, J.; Movaghar, B.

    1998-03-01

    Electron transport across micron thick films of columnar hexagonal discotic liquid crystal phases homeotropically aligned between metal electrode surfaces has been studied both experimentally and theoretically. These molecules are unique in their combination of charge transport along individual molecular columns with liquidlike self-organization. Typical of organic insulators, a high resistance Ohmic regime is evident at fields of less than 0.05 MV cm-1, due to a low concentration of chemical impurities (nroom temperature. Our results show that triphenylene-based discotics form an excellent class of highly ordered optically transparent insulators. At high temperatures and high fields the current is injection controlled and exhibits typical tunneling and space charge limited, nonlinear I-V characteristics. Dramatic jumps in injection currents are observed at phase transitions. The change at the crystalline to liquid crystalline phase transition is mainly due to more efficient "wetting" of the electrode surface in the liquid crystalline phase, whilst at the liquid crystalline to isotropic phase transition it arises from the enhancement in the molecular mobility. The concepts of semiconducting gaps, band mobilities, and carrier injection rates are extended to these new materials. The experimental observations are interpreted in a framework which takes into account the important role played by liquidlike dynamics in establishing the microscopic structural order in, what is, otherwise a highly anisotropic and weakly bonded "molecular crystal."

  17. Fast Switching of Vertical Alignment Liquid Crystal Cells with Liquid Crystalline Polymer Networks

    Science.gov (United States)

    Baek, Jong-In; Kim, Ki-Han; Kim, Jae Chang; Yoon, Tae-Hoon; Woo, Hwa Sung; Shin, Sung Tae; Souk, Jun Hyung

    2009-05-01

    This paper reports on the electro-optic characteristics of vertical alignment (VA) liquid crystal (LC) cells with liquid crystalline polymer networks. Optical bouncing, that occurs during the turn-on of VA cells, can be eliminated by introducing in-cell polymer networks. Furthermore, the turn-off also becomes much faster because of the anchoring effect caused by the anisotropy in the molecular shape of the liquid crystalline polymers. These response times have been found to vary for different LC/prepolymer mixtures. When the concentration of the liquid crystalline prepolymer in the initial LC/prepolymer mixture was 3, 5, or 10 wt %, the response times were measured to be 34, 56, and 87% faster than those of a VA cell with pure LC. These switching behaviors of VA cells with liquid crystalline polymer networks are demonstrated and compared with those using pure LC and with polymer networks made of isotropic prepolymers.

  18. Precise prediction of optical responses of liquid-crystal display products using a behavioral model of liquid crystal

    Science.gov (United States)

    Park, Chansoo; Cho, Youngmin; Kim, Jong-Man; Kim, Jongbin; Lee, Seung-Woo

    2012-01-01

    We propose a precise circuit model to estimate transient optical responses of an active-matrix liquid crystal display (AMLCD). Liquid crystal (LC) molecules in the pixel is behaviorally modeled by using the first-order system that is described by Verilog-A. Capacitance-voltage (C-V) characteristics of a pixel determine the accuracy of the dynamic responses. Measuring C-V characteristics is impossible because pixels are driven by switching transistors in the AMLCD. We propose a method to obtain the C-V data from natural optical responses. Estimated optical responses based on the C-V data extracted by our proposal show more accurate results than those based on C-V data obtained by using transmittance-voltage data. It is demonstrated that our behavioral model enables us to predict very accurate transient responses, which makes it possible to design LCD products with lower costs.

  19. Fabrication of Triangular Nanobeam Waveguide Networks in Bulk diamond Using Single-Crystal Silicon Hard Masks

    CERN Document Server

    Bayn, I; Li, L; Goldstein, J A; Schröder, T; Zhang, J; Chen, E H; Gaathon, O; Lu, M; Stein, A; Ruggiero, C A; Salzman, J; Kalish, R; Englund, D

    2014-01-01

    A scalable approach for integrated photonic networks in single-crystal diamond using triangular etching of bulk samples is presented. We describe designs of high quality factor (Q=2.51x10^6) photonic crystal cavities with low mode volume (Vm=1.062x({\\lambda}/n)^3), which are connected via waveguides supported by suspension structures with predicted transmission loss of only 0.05 dB. We demonstrate the fabrication of these structures using transferred single-crystal silicon hard masks and angular dry etching, yielding photonic crystal cavities in the visible spectrum with measured quality factors in excess of Q=3x103.

  20. Design and fabrication of PIN-PMN-PT single-crystal high-frequency ultrasound transducers.

    Science.gov (United States)

    Sun, Ping; Zhou, Qifa; Zhu, Benpeng; Wu, Dawei; Hu, Changhong; Cannata, Jonathan M; Tian, Jin; Han, Pengdi; Wang, Gaofeng; Shung, K Kirk

    2009-12-01

    High-frequency PIN-PMN-PT single crystal ultrasound transducers at center frequencies of 35 MHz and 60 MHz were successfully fabricated using lead indium niobate-lead magnesium niobate-lead titanate (0.23PIN- 0.5PMN-0.27PT) single crystal. The new PIN-PMN-PT single crystal has higher coercivity (6.0 kV/cm) and higher Curie temperature (160 degrees C) than PMN-PT crystal. Experimental results showed that the PIN-PMN-PT transducers have similar performance but better thermal stability compared with the PMN-PT transducers.

  1. Design and Fabrication of PIN-PMN-PT Single-Crystal High-Frequency Ultrasound Transducers

    OpenAIRE

    Sun, Ping; Zhou, Qifa; Zhu, Benpeng; WU, DAWEI; Hu, Changhong; Cannata, Jonathan M.; Tian, Jin; Han, Pengdi; Wang, Gaofeng; Shung, K. Kirk

    2009-01-01

    High-frequency PIN-PMN-PT single crystal ultrasound transducers at center frequencies of 35 MHz and 60 MHz were successfully fabricated using lead indium niobate-lead magnesium niobate-lead titanate (0.23PIN-0.5PMN-0.27PT) single crystal. The new PIN-PMN-PT single crystal has higher coercivity (6.0 kV/cm) and higher Curie temperature (160°C) than PMN-PT crystal. Experimental results showed that the PIN-PMN-PT transducers have similar performance but better thermal stability compared with the ...

  2. Liquid Crystals of Dendron-Like Pt Complexes Processable Into Nanofilms Dendrimers. Phase 2. Cholesteric Liquid Crystal Glass Platinum Acetylides

    Science.gov (United States)

    2014-08-01

    ciqa.edu.mx AFOSR FA9550-12-1-0234 August 2014 Cholesteric liquid crystal glass platinum acetylides Eduardo Arias...to be vitrified on cooling and form long time stability cholesteric glasses at room temperature, a series of platinum acetylide complexes modified...OCH3 and F, the cholesteric pitch was determined to be 1.7, 3.4 and 9.0 µ, respectively. INTRODUCTION Platinum acetylides are nonlinear

  3. Liquid crystal alignment in electro-responsive nanostructured thermosetting materials based on block copolymer dispersed liquid crystal

    Energy Technology Data Exchange (ETDEWEB)

    Tercjak, A; Garcia, I; Mondragon, I [Materials-Technologies Group, Departamento IngenierIa Quimica y M Ambiente, Escuela Politecnica, Universidad PaIs Vasco/Euskal Herriko Unibertsitatea, Plaza Europa 1, E-20018 Donostia-San Sebastian (Spain)], E-mail: scptesza@sc.ehu.es, E-mail: inaki.mondragon@ehu.es

    2008-07-09

    Novel well-defined nanostructured thermosetting systems were prepared by modification of a diglicydylether of bisphenol-A epoxy resin (DGEBA) with 10 or 15 wt% amphiphilic poly(styrene-b-ethylene oxide) block copolymer (PSEO) and 30 or 40 wt% low molecular weight liquid crystal 4'-(hexyl)-4-biphenyl-carbonitrile (HBC) using m-xylylenediamine (MXDA) as a curing agent. The competition between well-defined nanostructured materials and the ability for alignment of the liquid crystal phase in the materials obtained has been studied by atomic and electrostatic force microscopy, AFM and EFM, respectively. Based on our knowledge, this is the first time that addition of an adequate amount (10 wt%) of a block copolymer to 40 wt% HBC-(DGEBA/MXDA) leads to a well-organized nanostructured thermosetting system (between a hexagonal and worm-like ordered structure), which is also electro-responsive with high rate contrast. This behavior was confirmed using electrostatic force microscopy (EFM), by means of the response of the HBC liquid crystal phase to the voltage applied to the EFM tip. In contrast, though materials containing 15 wt% PSEO and 30 wt% HBC also form a well-defined nanostructured thermosetting system, they do not show such a high contrast between the uncharged and charged surface.

  4. Liquid crystal alignment in electro-responsive nanostructured thermosetting materials based on block copolymer dispersed liquid crystal

    Science.gov (United States)

    Tercjak, A.; Garcia, I.; Mondragon, I.

    2008-07-01

    Novel well-defined nanostructured thermosetting systems were prepared by modification of a diglicydylether of bisphenol-A epoxy resin (DGEBA) with 10 or 15 wt% amphiphilic poly(styrene-b-ethylene oxide) block copolymer (PSEO) and 30 or 40 wt% low molecular weight liquid crystal 4'-(hexyl)-4-biphenyl-carbonitrile (HBC) using m-xylylenediamine (MXDA) as a curing agent. The competition between well-defined nanostructured materials and the ability for alignment of the liquid crystal phase in the materials obtained has been studied by atomic and electrostatic force microscopy, AFM and EFM, respectively. Based on our knowledge, this is the first time that addition of an adequate amount (10 wt%) of a block copolymer to 40 wt% HBC-(DGEBA/MXDA) leads to a well-organized nanostructured thermosetting system (between a hexagonal and worm-like ordered structure), which is also electro-responsive with high rate contrast. This behavior was confirmed using electrostatic force microscopy (EFM), by means of the response of the HBC liquid crystal phase to the voltage applied to the EFM tip. In contrast, though materials containing 15 wt% PSEO and 30 wt% HBC also form a well-defined nanostructured thermosetting system, they do not show such a high contrast between the uncharged and charged surface.

  5. Compact Design of an Electrically Tunable and Rotatable Polarizer Based on a Liquid Crystal Photonic Bandgap Fiber

    DEFF Research Database (Denmark)

    Wei, Lei; Alkeskjold, Thomas Tanggaard; Bjarklev, Anders Overgaard

    2009-01-01

    In this letter, a compact electrically controlled broadband liquid crystal (LC) photonic bandgap fiber polarizer is designed and fabricated. A good fiber coupling quality between two single-mode fibers and one 10-mm-long LC-filled photonic crystal fiber is obtained and protected by using SU-8 fiber...... fixing structures during the device assembly. The total insertion loss of this all-in-fiber device is 2.7 dB. An electrically tunable polarization extinction ratio of 21.3 dB is achieved with 45$^{circ}$ rotatable transmission axis as well as switched on and off in the wavelength range of 1300–1600 nm....

  6. Liquid crystal-enabled electrophoresis and electro-osmosis

    Science.gov (United States)

    Lavrentovich, Oleg D.

    This work presents a comparative review of electrokinetic effects in isotropic and anisotropic (liquid crystalline) electrolytes. A special emphasis is placed on nonlinear electrokinetics with ow velocities growing as the square of the applied electric field. This phenomenon allows one to drive steady motion of particles and uids with an alternating-current electric field. In isotropic electrolytes, spatial separation of charges that leads to nonlinear electrokinetics is achieved through the properties of the solid component (typically a metal). If the electrolyte is a liquid crystal (LC), its anisotropic properties enable separation of charges in the presence of orientational distortions and under the action of an electric field. LC anisotropy leads to electrically-driven motion of colloidal particles (liquid crystal-enabled electrophoresis, LCEP) and of the LC itself (liquid crystal-enabled electro-osmosis, LCEO). The induced charge is proportional to the applied field, director gradients, anisotropy of conductivity, and anisotropy of permittivity. The electric field acts on the space separated charges to drive the electro-osmotic ows. If the director deformations lack mirror symmetry, the LC enables electrophoresis of free particles and electro-osmotic pumping. The advantage of LCenabled electrokinetics (LCEK) is that its mechanism lifts many restrictions imposed on the properties of the solid counterpart. For example, LCEP can transport particles even if these particles are deprived of any surface charges; the particles can even be a uid immiscible with a LC or a gas bubble. In a similar fashion, LCEO can drive ows even if there are no oating electrodes. Ionic currents in LCs which have been traditionally considered an undesirable feature in displays offer a broad platform for versatile applications in electrokinetics of particles and uids, micropumping and mixing, and lab-on-a-chip analysis...

  7. Modelling and fabrication of GaAs photonic-crystal cavities for cavity quantum electrodynamics.

    Science.gov (United States)

    Khankhoje, U K; Kim, S-H; Richards, B C; Hendrickson, J; Sweet, J; Olitzky, J D; Khitrova, G; Gibbs, H M; Scherer, A

    2010-02-10

    In this paper, we present recent progress in the growth, modelling, fabrication and characterization of gallium arsenide (GaAs) two-dimensional (2D) photonic-crystal slab cavities with embedded indium arsenide (InAs) quantum dots (QDs) that are designed for cavity quantum electrodynamics (cQED) experiments. Photonic-crystal modelling and device fabrication are discussed, followed by a detailed discussion of different failure modes that lead to photon loss. It is found that, along with errors introduced during fabrication, other significant factors such as the presence of a bottom substrate and cavity axis orientation with respect to the crystal axis, can influence the cavity quality factor (Q). A useful diagnostic tool in the form of contour finite-difference time domain (FDTD) is employed to analyse device performance.

  8. Nuclear magnetic resonance study of epoxy- based polymer-dispersed liquid crystal droplets

    CERN Document Server

    Han, J W

    1998-01-01

    In this work, polymer-dispersed liquid crystals (PDLC) samples were prepared and studied by nuclear magnetic resonance. Proton NMR spectra and spin-lattice relaxations of 4-cyano-4'-pentylbiphenyl(5CB) and p-methoxybenzylidene-p-n-butylaniline (MBBA) liquid crystals confined in microdroplets were measured. The experimental results were compared with those of the liquid crystals in the pores of silica-gels and with those of the mixing components. The experimental results indicated that the nematic ordering in the microdroplets differed markedly from that observed in bulk nematic crystals. In addition, we examined spin-lattice relaxation mechanisms. The proton spin-lattice relaxation mechanisms in bulk nematic liquid crystals are well established. However, when nematic liquid crystals are confined in microdroplets, the relaxation mechanisms are expected to be affected. We examined possible relaxation mechanisms to explain the observed increase in the spin-lattice relaxation rate of liquid crystals confined in m...

  9. Soap, science, and flat-screen TVs a history of liquid crystals

    CERN Document Server

    Dunmur, David

    2011-01-01

    The terms 'liquid crystal' or 'liquid crystal display' (LCD) are well-known in the context of flat-screen televisions, but the properties and history of liquid crystals are little understood. This book tells the story of liquid crystals, from their controversial discovery at the end of the nineteenth century, to their eventual acceptance as another state of matter to rank alongside gases, liquids and solids. As their story unfolds, the scientists involved and their works are put into illuminating broader socio-political contexts. In recent years, liquid crystals have had a major impact on the display industry, culminating in the now widely available flat-screen televisions; this development is described in detail over three chapters, and the basic science behind it is explained in simple terms accessible to a general reader. New applications of liquid crystals in materials, bio-systems, medicine and technology are also explained.

  10. Structure and Dynamics of Freely Suspended Liquid Crystals

    Science.gov (United States)

    Clark, Noel A.

    2004-01-01

    Smectic liquid crystals are phases of rod shaped molecules organized into one dimensionally (1 D) periodic arrays of layers, each layer being between one and two molecular lengths thick. In the least ordered smectic phases, the smectics A and C, each layer is a two dimensional (2D) liquid. Additionally there are a variety of more ordered smectic phases having hexatic short range translational order or 2D crystalline or quasi long range translational order within the layers. The inherent fluid-layer structure and low vapor pressure of smectic liquid crystals enables the long term stabilization of freely suspended, single component, layered fluid films as thin as 30A, a single molecular layer. The layering forces the films to be an integral number of smectic layers thick, quantizing their thickness in layer units and forcing a film of a particular number of layers to be physically homogeneous with respect to its layer structure over its entire area. Optical reflectivity enables the precise determination of the number of layers. These ultrathin freely suspended liquid crystal films are structures of fundamental interest in condensed matter and fluid physics. They are the thinnest known stable fluid structures and have the largest surface-to-volume ratio of any stable fluid preparation, making them ideal for the study of the effects of reduced dimensionality on phase behavior and on fluctuation and interface phenomena. Their low vapor pressure and quantized thickness enable the effective use of microgravity to extend the study of basic capillary phenomena to ultrathin fluid films. Freely suspended films have been a wellspring of new LC physics. They have been used to provide unique experimental conditions for the study of condensed phase transitions in two dimensions. They are the only system in which the hexatic has been unambiguously identified as a phase of matter, and the only physical system in which fluctuations of a 2D XY system and Kosterlitz Thouless phase

  11. Electrically Rotatable Polarizer Using One-Dimensional Photonic Crystal with a Nematic Liquid Crystal Defect Layer

    Directory of Open Access Journals (Sweden)

    Ryotaro Ozaki

    2015-09-01

    Full Text Available Polarization characteristics of defect mode peaks in a one-dimensional (1D photonic crystal (PC with a nematic liquid crystal (NLC defect layer have been investigated. Two different polarized defect modes are observed in a stop band. One group of defect modes is polarized along the long molecular axis of the NLC, whereas another group is polarized along its short axis. Polarizations of the defect modes can be tuned by field-induced in-plane reorientation of the NLC in the defect layer. The polarization properties of the 1D PC with the NLC defect layer is also investigated by the finite difference time domain (FDTD simulation.

  12. Evidence of Broken Reciprocity in Cholesteric Liquid Crystals

    Science.gov (United States)

    Venkataraman, Nithya; Moreira, Michele; Taheri, Bahman; Palffy-Muhoray, Peter

    2007-03-01

    Reciprocity of scattering of a plane incident wave is predicated on bounded scattering media with symmetric and linear permittivity, conductivity and permeability. In chiral media, such as cholesteric liquid crystals, the dielectric tensor is asymmetric due the presence of odd powers of the wave vector resulting from nonlocality and broken inversion symmetry. Evidence of non-reciprocity has been found in optically active crystals by Bennet [1] and in stacks of cholesteric and nematic liquid crystal cells [2]. Here we present transmittance and reflectance data for cholesteric cells with different pitches having overlapping but distinct reflection bands. We relate our results to simple analytic descriptions of the materials properties and of propagating modes and assess them in light of the requirements for reciprocity. 1. P.J. Bennett, S. Dhanjal, Yu. P. Svirko and N. I. Zheludev, Opt. Lett. 21, 1955 (1996) 2. J. Hwang; M.H. Song; B. Park; S. Nishimura; T. Toyooka; J.W. Wu; Y. Takanishi; K. Ishikawa; H. Takezoe, Nat. Mat. 4, 383 (2005).

  13. Evidence of Broken Reciprocity in Chiral Liquid Crystals

    Science.gov (United States)

    Moreira, Michele; Venkataraman, Nithya; Taheri, Bahman; Palffy-Muhoray, Peter

    2008-03-01

    Reciprocity in light scattering is predicated on bounded scattering media with symmetric and linear permittivity, conductivity and permeability. Due to their anisotropy and chirality, cholesteric liquid crystal form periodic dielectric structures. If the periodicity is comparable to the wavelength of light, these phases are self-assembled photonic band gap structures. There appear in the permittivity odd powers of the wave vector resulting from nonlocality and broken inversion symmetry. Evidence of non-reciprocity has been found in optically active crystals by Bennett [1] and in stacks of cholesteric and nematic liquid crystal cells by Takezoe [2]. We present experimental data showing broken reciprocity in transmittance and reflectance in cholesteric cells with different pitches having overlapping but distinct reflection bands. We explain our results in terms of simple analytic descriptions of material properties and propagating modes. [1] P.J. Bennett, S. Dhanjal, Yu. P. Svirko and N. I. Zheludev, Opt. Lett. 21, 1955 (1996) [2] J. Hwang; M.H. Song; B. Park; S. Nishimura; T. Toyooka; J.W. Wu; Y. Takanishi; K. Ishikawa; H. Takezoe, Nat. Mat. 4, 383 (2005).

  14. Fabrication of high fidelity, high index three-dimensional photonic crystals using a templating approach

    Science.gov (United States)

    Xu, Yongan

    In this dissertation, we demonstrate the fabrication of high fidelity 3D photonic crystal through polymer template fabrication, backfilling and template removal to obtain high index inversed inorganic photonic crystals (PCs). Along the line, we study the photoresist chemistry to minimize the shrinkage, backfilling strategies for complete infiltration, and template removal at high and low temperatures to minimize crack-formation. Using multibeam interference lithography (MBIL), we fabricate diamond-like photonic structures from commercially available photoresist, SU-8, epoxy functionalized polyhedral oligomeric silsesquioxane (POSS), and narrowly distributed poly(glycidyl methacrylate)s (PGMA). The 3D structure from PGMA shows the lowest shrinkage in the [111] direction, 18%, compared to those fabricated from the SU-8 (41%) and POSS (48%) materials under the same conditions. To fabricate a photonic crystal with large and complete photonic bandgap, it often requires backfilling of high index inorganic materials into a 3D polymer template. We have studied different backfilling methods to create three different types of high index, inorganic 3D photonic crystals. Using SU-8 structures as templates, we systematically study the electrodeposition technique to create inversed 3D titania crystals. We find that 3D SU-8 template is completely infiltrated with titania sol-gel through a two-stage process: a conformal coating of a thin layer of films occurs at the early electrodeposition stage (simulated photonic bandgaps (PBGs) and the SEM observation, further supporting the complete filling by the wet chemistry. Since both PGMA and SU-8 decompose at a temperature above 400°C, leading to the formation of defects and cracks, a highly thermal and mechanical stable template is desired for PC fabrication. We fabricate the 3D POSS structures by MBIL, which can be converted to crack-free silica-like templates over the entire sample area (˜5 mm in diameter) by either thermal

  15. Influence of zone purification process on TlBr crystals for radiation detector fabrication

    Energy Technology Data Exchange (ETDEWEB)

    Hitomi, Keitaro [Department of Electronics, Tohoku Institute of Technology, 35-1 Yagiyama Kasumi-cho, Taihaku-ku, Sendai 982-8577 (Japan)], E-mail: hitomi@tohtech.ac.jp; Onodera, Toshiyuki; Shoji, Tadayoshi [Department of Electronics, Tohoku Institute of Technology, 35-1 Yagiyama Kasumi-cho, Taihaku-ku, Sendai 982-8577 (Japan)

    2007-08-21

    Thallium bromide (TlBr) is a wide gap compound semiconductor and is a promising material for fabrication of nuclear radiation detectors. In this study, the conventional zone refining method was employed to reduce the concentration of impurities in the TlBr crystals. In order to evaluate the efficiency of the zone purification, the zone purification process was repeated up to 300 times. The resistivity, the charge transport properties, and the spectroscopic performance of TlBr detectors fabricated from the crystals zone purified 1 time, 100 times, and 300 times were compared in this study in order to clarify the effectiveness of the zone purification process.

  16. Fabrication of fiber-embedded multi-core photonic crystal fibers

    Institute of Scientific and Technical Information of China (English)

    Weimin Sun; Xiaoqi Liu; Fenghua Fu; Jianzhong Zhang

    2008-01-01

    @@ A novel fabrication method of multi-core photonic crystal fibers is proposed on the basis of a fiberembedded technique. A taper tower is used to modify the structures of the fiber preform, and four steps of fiber fabrication and different structures of fiber samples are given. The mode structures and beating characteristics of a photonic crystal fiber sample with two successive cores are investigated in detail with the help of a supercontinuum light source, a charge-coupled device (CCD) camera, and an optical spectrum analyzer. The test results show a clear beating phenomenon between two orthotropic polarization modes with a 2.8-nm peak interval in wavelength.

  17. Liquid Crystal Pre-Patterning for Cell Division

    Science.gov (United States)

    Hill, Nicholas; Mottram, Nigel; Lydon, John

    2005-11-01

    We are examining the hypothesis that the overall geometry of mitosis is determined by liquid-crystal pre-patterning of the cytoplasm. The identification of mitosis with liquid crystalline (LX) phases is at least 50 years old but no attempt has been made to propose a detailed theory, presumably because of the difficulties in applying a theory of liquid crystals (LCs) in a 3D geometry. In this work, we use a mathematical model (Q-tensor theory) of a nematic LC for the cytoplasm of the cell and solve this numerically to show that the geometry of the prophase and metaphase can be explained using LX phases. The pre-patterning for the spindle is regarded as a bipolar LX assembly with the centrosomes acting as LC poles (centres of LX defects). The centrosomes and the nuclear envelope are both treated as bodies submerged in the LC medium between two spherical shells (the nuclear and cell membranes). The geometries considered are novel and 3D.

  18. Active Matter: Liquid-Crystal Hydrodynamics With a Difference

    Science.gov (United States)

    Ramaswamy, Sriram

    2011-07-01

    Coherently moving flocks of beasts, birds and bacteria are an example of polar nematic liquid-crystalline order in the living world. The highly ordered local structures seen in the configurations of the biopolymeric filaments, energized by molecular motors, in the cytoskeleton of a living cell are another example; and chemically or mechanically agitated orientable particles such as catalytic colloidal rods or monolayers of macroscopic bits of wire are a third. There has been a great deal of progress in understanding the states, phase transitions, and fluctuations of these nonequilibrium systems, known broadly as Active Matter, and the methods used are a nice generalization of the hydrodynamic approach to liquid crystals. Among the interesting results that have emerged are some curious instabilities in bulk as well as thin-film geometries; the peculiar kinetics of domain growth of active nematics; anomalies in the dynamics of a stiff filament in an active medium, and the twisted instabilities of chiral active liquid crystals. My talk will provide some background, summarize the achievements of the field, including those of our group, and identify open problems and future directions.

  19. High dno/dT liquid crystals and their applications in a thermally tunable liquid crystal photonic crystal fiber

    DEFF Research Database (Denmark)

    Li, J.; Gauza, S.; Wu, S.-T.

    2006-01-01

    crystal mixtures, designated as UCF-1 and UCF-2. The dn(o)/dT of UCF-1 is similar to 4x higher than that of 5CB at room temperature. By infiltrating UCF-1 into the air holes of a three-rod core photonic crystal fiber, we demonstrate a thermally tunable photonic bandgap fiber with tuning sensitivity of 27...

  20. Transport phenomena in the crystallization of lysozyme by osmotic dewatering and liquid-liquid diffusion in low gravity

    Science.gov (United States)

    Todd, Paul; Sportiello, Michael G.; Gregory, Derek; Cassanto, John M.; Alvarado, Ulises A.; Ostroff, Robert; Korszun, Z. R.

    1993-01-01

    Two methods of protein crystallization, osmotic dewatering and liquid-liquid diffusion, like the vapor diffusion (hanging-drop and sessile-drop) methods allow a gradual approach to supersaturation conditions. The crystallization of hen egg-white lysozyme, an extensively characterized protein crystal, in the presence of sodium chloride was used as an experimental model with which to compare these two methods in low gravity and in the laboratory. Comparisons of crystal growth rates by the two methods under the two conditions have, to date, indicated that the rate of crystal growth by osmotic dewatering is nearly the same in low gravity and on the ground, while much faster crystal growth rates can be achieved by the liquid-liquid diffusion method in low gravity.

  1. Fabrication of Terahertz Wave Resonators with Alumina Diamond Photonic Crystals for Frequency Amplification in Water Solvents

    Energy Technology Data Exchange (ETDEWEB)

    Ohta, N; Niki, T; Kirihara, S, E-mail: n-ohta@jwri.osaka-u.ac.jp [Smart Processing Research Center, Joining and Welding Research Institute, Osaka University, Ibaraki, Osaka, 567-0047 (Japan)

    2011-05-15

    Terahertz wave resonators composed of alumina photonic crystals with diamond lattice structures were designed and fabricated by using micro stereolithography. These three dimensional periodic structures can reflect perfectly electromagnetic waves through Bragg diffraction. A micro glass cell including water solutions was put between the photonic crystals as a novel resonance sensor with terahertz frequency range. The localized and amplified waves in the resonators were measured by a spectroscopy, and visualized by theoretical simulations.

  2. Robust Polypropylene Fabrics Super-Repelling Various Liquids: A Simple, Rapid and Scalable Fabrication Method by Solvent Swelling.

    Science.gov (United States)

    Zhu, Tang; Cai, Chao; Duan, Chunting; Zhai, Shuai; Liang, Songmiao; Jin, Yan; Zhao, Ning; Xu, Jian

    2015-07-01

    A simple, rapid (10 s) and scalable method to fabricate superhydrophobic polypropylene (PP) fabrics is developed by swelling the fabrics in cyclohexane/heptane mixture at 80 °C. The recrystallization of the swollen macromolecules on the fiber surface contributes to the formation of submicron protuberances, which increase the surface roughness dramatically and result in superhydrophobic behavior. The superhydrophobic PP fabrics possess excellent repellency to blood, urine, milk, coffee, and other common liquids, and show good durability and robustness, such as remarkable resistances to water penetration, abrasion, acidic/alkaline solution, and boiling water. The excellent comprehensive performance of the superhydrophobic PP fabrics indicates their potential applications as oil/water separation materials, protective garments, diaper pads, or other medical and health supplies. This simple, fast and low cost method operating at a relatively low temperature is superior to other reported techniques for fabricating superhydrophobic PP materials as far as large scale manufacturing is considered. Moreover, the proposed method is applicable for preparing superhydrophobic PP films and sheets as well.

  3. Optical devices based on liquid crystal photonic bandgap fibers

    DEFF Research Database (Denmark)

    Alkeskjold, Thomas Tanggaard

    2005-01-01

    In this ph.d. work, an experimental and theoretical study on Liquid Crystal (LC) infiltrated Photonic Crystal Fibers (PCFs) has been carried out. PCFs usually, consists of an air/silica microstructure of air holes arranged in a triangular lattice surrounding a core defect defined by a missing air...... hole. The presence of a LC in the holes of the PCF transforms the fiber from a Total Internal Reflection (TIR) guiding type into a Photonic BandGap (PBG) guiding type, where light is confined to the silica core by coherent scattering from the LC-billed holes. The high dielectric and optical anisotropy...... of LCs combined with the unique waveguiding features of PBG fibers gives the LC filled PCFs unique tunable properties. PBG guidance has been demonstrated for different mesophases of LCs and various functional compact fibers has been demonstrated, which utilitzes the high thermo-optical and electro...

  4. Gold nanoparticles in columnar matrix of discotic liquid crystal

    Science.gov (United States)

    Supreet, Kumar, Rishi; Pratibha, R.; Kumar, Sandeep; Raina, K. K.

    2013-06-01

    Hexanethiolate-stabilized gold nanoparticles (GNP) were synthesized by the method adopted by Song et al.[2]. Average size of GNPs was determined by scanning transmission electron microscopy (STEM). This method yielded nanoparticles with average particle size of 1.5 nm. In the present work, we have incorporated GNPs in columnar matrix of discotic liquid crystal. The thermo-physical properties of these mixtures were investigated using polarizing optical micrography (POM), differential scanning calorimetry (DSC) and dielectric spectroscopy. Results show GNPs does not affect the hexagonal arrangement of columns of DLC. However, there is decrease in mesophase to crystallization temperature as confirmed by DSC. This approach of crossing of the field of nanotechnology with DLC may lead to novel materials with interesting properties that are useful for many device applications.

  5. Asymmetric flavone-based liquid crystals: synthesis and properties

    Energy Technology Data Exchange (ETDEWEB)

    Timmons, Daren J. [Department of Chemistry, Virginia Military Institute, Lexington, VA, USA; Jordan, Abraham J. [Department of Chemistry, Virginia Military Institute, Lexington, VA, USA; Kirchon, Angelo A. [Department of Chemistry, Virginia Military Institute, Lexington, VA, USA; Murthy, N. Sanjeeva [New Jersey Center for Biomaterials, Rutgers, The State University of New Jersey, Piscataway, NJ, USA; Siemers, Troy J. [Department of Applied Mathematics, Virginia Military Institute, Lexington, VA, USA; Harrison, Daniel P. [Department of Chemistry, Virginia Military Institute, Lexington, VA, USA; Slebodnick, Carla [Department of Chemistry, Virginia Polytechnic Institute and State University, Blacksburg, VA, USA

    2017-02-01

    A series of flavones (n-F) substituted at the 4', and 6 positions was prepared, characterised by NMR (1H,13C), HRMS, and studied for liquid crystal properties. The 4'-alkoxy,6-methoxyflavones (4-F–16-F) exhibit varying ranges of nematic and smectic A phases as evidenced by polarised optical microscopy and differential scanning calorimetry (DSC). As the tail length is increased, the smectic phase becomes more prevalent. Smectic phases for (8-F–16-F) were further analysed by powder X-ray diffraction (XRD), and the rate of structural transformations was explored by combined DSC/XRD studies. Flavonol 6-F–OH was also prepared but no mesogenic behaviour was observed. The molecular structures of 6-F and 6-F–OH were determined by single-crystal XRD and help to explain the differences in material properties. Additionally, fluorescence and electrochemical studies were conducted on solutions of n-F.

  6. Mechanical actions on nanocylinders in nematic liquid crystals.

    Science.gov (United States)

    McKay, Geoff; Virga, Epifanio G

    2005-04-01

    We apply the Landau-de Gennes theory to study the equilibrium problem that arises when a cylinder of radius R is kept at a given distance h from a plane wall. We assume that both the lateral boundary of the cylinder and the wall enforce homeotropic anchoring conditions on the liquid crystal, which prescribe the liquid crystal molecules to stick orthogonally to the bounding surfaces. Typically, in our study R ranges from a few to hundreds of biaxial coherence lengths, where a biaxial coherence length, which depends on the temperature, is a few nanometers. The equilibrium textures exhibit a bifurcation between a flat solution, where one eigenvector of the order tensor Q is everywhere parallel to the cylinder's axis, and an escape solution, where the eigenframe of Q flips out of the plane orthogonal to the cylinder's axis. The escape texture minimizes an appropriately renormalized energy functional F(*) for h>h(c), while the flat texture minimizes F(*) for h< h(c). We compute both the force and the torque transmitted to the cylinder by the surrounding liquid crystal and we find that the diagrams of both as functions of h fail to be monotonic along the escape texture. Thus, upon decreasing h, a snapping instability is predicted to occur, with an associated hysteresis loop in the force diagram, before h reaches h(c). Finally, since the symmetry of this problem makes it equivalent to the one where two parallel cylinders are separated by the distance 2h , the snapping instability predicted here should also be observed there.

  7. Asymmetric electrooptic response in a nematic liquid crystal

    Energy Technology Data Exchange (ETDEWEB)

    Dascalu, Constanta [Politechnica University of Bucharest, Bucharest (Romania)

    2001-06-01

    An asymmetric electrooptic response in nematic liquid crystal (LC) has been obtained. The liquid crystal hybrid cell was made by using a standard configuration. One of the ITO (Indium Tin Oxide) electrodes was covered with a surfactant, which induces a homeotropic alignment. The second of the indium tin oxide electrodes was covered by a thin layer of photopolymer, which was previously mixed with an acid, which favours a process of release of protons. Such cations are responsible of electrochemical process in the LC leading to an asymmetric electrooptic response, which depend on the polarity of the applied electric field. This fact is due to an internal field, which change the effective voltage thresholds for the reorientation of the liquid crystal. During the anodic polarization, the optical switching is inhibited because the effective field decreases below the threshold value. On contrary for the opposite polarization the effective field is enough to determine a homeotropic alignment. [Spanish] Se ha obtenido una respuesta electro-optica asimetrica en cristales liquidos neumaticos. La celula hibrida de cristal liquido fue construida utilizando una configuracion estandar. Uno de los electrodos ITO fue cubierto con una pelicula delgada de material organico para inducir una alineacion homeotropa. El otro electrodo ITO fue cubierto con una pelicula delgada de fotopolimero anteriormente mezclada con un acido para favorecer la emision de protones. Estos cationes son responsables del proceso electroquimico en LC, conduciendo a una respuesta electro-optica asimetrica que depende de la polaridad del campo electrico aplicado. Este efecto es originado por un campo interno que cambia el umbral efectivo del voltaje para la reorientacion del cristal liquido. Durante la polarizacion anodica, la conmutacion optica se inhibe debido a que el campo efectivo disminuye abajo del valor del umbral. Por el contrario, para la polarizacion opuesta el campo efectivo es suficiente para

  8. Nematic liquid crystals on sinusoidal channels: the zigzag instability

    Science.gov (United States)

    Silvestre, Nuno M.; Romero-Enrique, Jose M.; Telo da Gama, Margarida M.

    2017-01-01

    Substrates which are chemically or topographically patterned induce a variety of liquid crystal textures. The response of the liquid crystal to competing surface orientations, typical of patterned substrates, is determined by the anisotropy of the elastic constants and the interplay of the relevant lengths scales, such as the correlation length and the surface geometrical parameters. Transitions between different textures, usually with different symmetries, may occur under a wide range of conditions. We use the Landau-de Gennes free energy to investigate the texture of nematics in sinusoidal channels with parallel anchoring bounded by nematic-air interfaces that favour perpendicular (hometropic) anchoring. In micron size channels 5CB was observed to exhibit a non-trivial texture characterized by a disclination line, within the channel, which is broken into a zigzag pattern. Our calculations reveal that when the elastic anisotropy of the nematic does not favour twist distortions the defect is a straight disclination line that runs along the channel, which breaks into a zigzag pattern with a characteristic period, when the twist elastic constant becomes sufficiently small when compared to the splay and bend constants. The transition occurs through a twist instability that drives the defect line to rotate from its original position. The interplay between the energetically favourable twist distortions that induce the defect rotation and the liquid crystal anchoring at the surfaces leads to the zigzag pattern. We investigate in detail the dependence of the periodicity of the zigzag pattern on the geometrical parameters of the sinusoidal channels, which in line with the experimental results is found to be non-linear.

  9. Recovery of valuable materials from waste liquid crystal display panel.

    Science.gov (United States)

    Li, Jinhui; Gao, Song; Duan, Huabo; Liu, Lili

    2009-07-01

    Associated with the rapid development of the information and electronic industry, liquid crystal displays (LCDs) have been increasingly sold as displays. However, during the discarding at their end-of-life stage, significant environmental hazards, impacts on health and a loss of resources may occur, if the scraps are not managed in an appropriate way. In order to improve the efficiency of the recovery of valuable materials from waste LCDs panel in an environmentally sound manner, this study presents a combined recycling technology process on the basis of manual dismantling and chemical treatment of LCDs. Three key processes of this technology have been studied, including the separation of LCD polarizing film by thermal shock method the removal of liquid crystals between the glass substrates by the ultrasonic cleaning, and the recovery of indium metal from glass by dissolution. The results show that valuable materials (e.g. indium) and harmful substances (e.g. liquid crystals) could be efficiently recovered or separated through above-mentioned combined technology. The optimal conditions are: (1) the peak temperature of thermal shock to separate polarizing film, ranges from 230 to 240 degrees C, where pyrolysis could be avoided; (2) the ultrasonic-assisted cleaning was most efficient at a frequency of 40 KHz (P = 40 W) and the exposure of the substrate to industrial detergents for 10 min; and (3) indium separation from glass in a mix of concentrated hydrochloric acid at 38% and nitric acid at 69% (HCl:HNO(3):H(2)O = 45:5:50, volume ratio). The indium separation process was conducted with an exposure time of 30 min at a constant temperature of 60 degrees C.

  10. Local structural ordering in surface-confined liquid crystals

    Science.gov (United States)

    Śliwa, I.; Jeżewski, W.; Zakharov, A. V.

    2017-06-01

    The effect of the interplay between attractive nonlocal surface interactions and attractive pair long-range intermolecular couplings on molecular structures of liquid crystals confined in thin cells with flat solid surfaces has been studied. Extending the McMillan mean field theory to include finite systems, it has been shown that confining surfaces can induce complex orientational and translational ordering of molecules. Typically, local smectic A, nematic, and isotropic phases have been shown to coexist in certain temperature ranges, provided that confining cells are sufficiently thick, albeit finite. Due to the nonlocality of surface interactions, the spatial arrangement of these local phases can display, in general, an unexpected complexity along the surface normal direction. In particular, molecules located in the vicinity of surfaces can still be organized in smectic layers, even though nematic and/or isotropic order can simultaneously appear in the interior of cells. The resulting surface freezing of smectic layers has been confirmed to occur even for rather weak surface interactions. The surface interactions cannot, however, prevent smectic layers from melting relatively close to system boundaries, even when molecules are still arranged in layers within the central region of the system. The internal interfaces, separating individual liquid-crystal phases, are demonstrated here to form fronts of local finite-size transitions that move across cells under temperature changes. Although the complex molecular ordering in surface confined liquid-crystal systems can essentially be controlled by temperature variations, specific thermal properties of these systems, especially the nature of the local transitions, are argued to be strongly conditioned to the degree of molecular packing.

  11. Design and fabrication of a phononic-crystal-based Love wave resonator in GHz range

    Directory of Open Access Journals (Sweden)

    Ting-Wei Liu

    2014-12-01

    Full Text Available This paper presents a method for designing and fabricating a Love wave resonator utilizing the phononic crystal (PC as the reflectors. The PCs were formed by depositing 2D, periodically etched silica film on a quartz substrate. We analyzed the PC structure, and within its partial bandgap we designed a one-port resonator that contained a set of inter-digital transducer (IDT inside the resonant cavity bonded by two PC arrays. With sub-micrometer structures, the resonator was designed to operate at 1.25 GHz. The device was fabricated by employing the microelectromechanical system (MEMS fabrication technology and the resonant performance was evaluated.

  12. Analysis of Nematic Liquid Crystals with Disclination Lines

    CERN Document Server

    Bauman, P; Phillips, D

    2011-01-01

    We investigate the structure of nematic liquid crystal thin films described by the Landau--de Gennes tensor-valued order parameter with Dirichlet boundary conditions of nonzero degree. We prove that as the elasticity constant goes to zero a limiting uniaxial texture forms with disclination lines corresponding to a finite number of defects, all of degree 1/2 or all of degree -1/2. We also state a result on the limiting behavior of minimizers of the Chern-Simons-Higgs model without magnetic field that follows from a similar proof.

  13. Holographic liquid crystal polarization grating with Fabry-Perot structure.

    Science.gov (United States)

    Sakamoto, Moritsugu; Yamaguchi, Haruki; Noda, Kohei; Sasaki, Tomoyuki; Kawatsuki, Nobuhiro; Ono, Hiroshi

    2016-03-15

    A holographic liquid crystal polarization grating with a Fabry-Perot structure was developed. Because of its resonant structure, the device offers high levels of control of the diffraction properties of incident-polarized light beams, depending on the resonance conditions. The diffracted light beams are emitted in both the reflection and transmission directions, and the device thus works as a multibranch polarization grating with double optical paths, unlike a conventional polarization grating. These device features were experimentally demonstrated and were also explained theoretically.

  14. Polymer Alignment Behavior with Molecular Switching of Ferroelectric Liquid Crystal

    Science.gov (United States)

    Murashige, Takeshi; Fujikake, Hideo; Sato, Hiroto; Kikuchi, Hiroshi; Kurita, Taiichiro; Sato, Fumio

    2007-01-01

    This paper describes the molecular alignment behavior of polymer networks with switching of a ferroelectric liquid crystal (FLC) in a molecularly aligned FLC/polymer composite film. The polymer alignment in the composite film, which was slowly formed by photopolymerization-induced phase separation of a heated nematic-phase solution of FLC and monomers, was observed by polarization Raman spectral microscopy. Raman peak intensities originating from the polymers were changed with those from the FLC, when the applied voltage polarity was changed. The trace patterns of the Raman peak intensity with in-plane rotation of the composite film indicated that the formed flexible polymers can follow FLC molecular switching.

  15. Experimental studies of the transient fluctuation theorem using liquid crystals

    Indian Academy of Sciences (India)

    Soma Datta; Arun Roy

    2009-05-01

    In a thermodynamical process, the dissipation or production of entropy can only be positive or zero, according to the second law of thermodynamics. However, the laws of thermodynamics are applicable to large systems in the thermodynamic limit. Recently a fluctuation theorem, known as the transient fluctuation theorem (TFT), which generalizes the second law of thermodynamics to small systems has been proposed. This theorem has been tested in small systems such as a colloidal particle in an optical trap. We report for the first time an analogous experimental study of TFT in a spatially extended system using liquid crystals.

  16. Colloidal interactions and transport in nematic liquid crystals.

    Science.gov (United States)

    Tatarkova, S A; Burnham, D R; Kirby, A K; Love, G D; Terentjev, E M

    2007-04-13

    We describe a new nematic liquid-crystal colloid system which is characterized by both charge stabilization of the particles and an interaction force. We estimate the effective charge of the particles by electrophoretic measurements and find that in such systems the director anchoring energy W is very low and the particles have little director distortion around them. The interaction force is created by producing a radial distribution of the nematic order parameter around a locally isotropic region created by ir laser heating. We theoretically describe this as being due to the induced flexoelectric polarization, the quadrupolar symmetry of which provides the required long-range force acting on charged particles.

  17. Modelling space-charge limited transport in discotic liquid crystals

    Science.gov (United States)

    Lever, L.; Bushby, R. J.; Kelsall, R. W.

    2006-05-01

    Using a self-consistent Monte Carlo/Poisson algorithm, we investigate space-charge limited conduction in discotic liquid crystal time of flight (TOF) experiments. The charge transport mechanism is via a semi-delocalised banding process, and two mechanisms of photo-generation of charge carriers are considered: excitons generated by the laser pulse, which quench at the anode, and processes, such as the Onsager mechanism, that lead to direct generation of free electron/hole pairs within the bulk. The nature of the space-charge limited TOF transient is investigated as a function of quantum yield of charge carriers and as a function of applied potential.

  18. Electronic properties of hybrid metal-discotic liquid crystal nanostructures

    Science.gov (United States)

    Kelsall, R. W.; Pecchia, A.; Bourlange, A.; Movaghar, B.; Evans, S. D.; Hickey, B. J.; Boden, N.

    2003-04-01

    A new class of hybrid organic/inorganic nanostructures, comprising self-organised discotic liquid crystal layers deposited on ultrathin metal films, has been investigated both experimentally and theoretically. Calculations show that the periodic self-organised molecular layer gives rise to a new, hybrid electronic bandstructure, resulting in modulation of the metal film conductivity. In situ conductivity measurements during deposition of such self-organised layers confirm that the metal film conductivity is altered. Theoretical modeling also shows that the AC conductivity should show structure related to the carrier trapping and one-dimensional transport features of the self-organised layer.

  19. Green backlighting for TV liquid crystal display using carbon nanotubes

    Science.gov (United States)

    Delepierre, Gabriel; Mahfouz, Rami; Cadete Santos Aires, Francisco J.; Dijon, Jean

    2010-08-01

    A methodology to evaluate the emission characteristics of carbon nanotube layers in the context of liquid crystal display backlighting has been elaborated. Carbon nanotube layers with emission characteristics compatible with backlighting have been demonstrated for growth temperature as low as 400 °C, thanks to the use of plasma pretreatment before growth. This very low growth temperature allows to use soda lime glass for the backlight unit and thus to expect very low cost and very low power consumption devices with this technology.

  20. Modelling spreading dynamics of liquid crystals in three spatial dimensions

    CERN Document Server

    Lin, Te-Sheng; Thiele, Uwe; Cummings, Linda J

    2013-01-01

    We study spreading dynamics of nematic liquid crystal droplets within the framework of the long-wave approximation. A fourth order nonlinear parabolic partial differential equation governing the free surface evolution is derived. The influence of elastic distortion energy and of imposed anchoring variations at the substrate are explored through linear stability analysis and scaling arguments, which yield useful insight and predictions for the behaviour of spreading droplets. This behaviour is captured by fully nonlinear time-dependent simulations of three dimensional droplets spreading in the presence of anchoring variations that model simple defects in the nematic orientation at the substrate.

  1. Defect structures in liquid crystals bounded by microwrinkles

    Science.gov (United States)

    Ohzono, Takuya

    2013-09-01

    Spatially confined liquid crystals (LCs) exhibit non-uniform alignment, often accompanied by self-organized topological defects of non-trivial shape in response to imposed boundary conditions and geometry. Here we show that a nematic LC, when confined in a sinusoidal microwrinkle groove, exhibits a new periodic arrangement of twist deformations and a zigzag line defect. This periodic ordering results from the inherent LC elastic anisotropy and the antagonistic boundary conditions at the top flat LC and the curved LC-groove interfaces. The effect of the LC thickness on the stability of the line defect is also shown.

  2. Single Molecule Studies on Dynamics in Liquid Crystals

    Directory of Open Access Journals (Sweden)

    Daniela Täuber

    2013-09-01

    Full Text Available Single molecule (SM methods are able to resolve structure related dynamics of guest molecules in liquid crystals (LC. Highly diluted small dye molecules on the one hand explore structure formation and LC dynamics, on the other hand they report about a distortion caused by the guest molecules. The anisotropic structure of LC materials is used to retrieve specific conformation related properties of larger guest molecules like conjugated polymers. This in particular sheds light on organization mechanisms within biological cells, where large molecules are found in nematic LC surroundings. This review gives a short overview related to the application of highly sensitive SM detection schemes in LC.

  3. Crystallization and glass formation in multi-component liquids

    Science.gov (United States)

    Zhang, Kai; Wang, Minglei; Papanikolaou, Stefanos; Schroers, Jan; O'Hern, Corey

    2013-03-01

    When a liquid is cooled faster than the critical cooling rate, crystallization is avoided, and amorphous solids are formed. What sets the critical cooling rate? We perform molecular dynamics simulations of model metallic alloys--polydisperse spheres with hard-sphere and modified Lennard-Jones interactions--to study the critical cooling rate as a function of the particle size ratio, stoichiometry, and strength of the attractive interactions. We also characterize the structural properties of glassy and crystalline states that form at rapid and slow cooling/compression rates, respectively, using local order parameters, position correlation functions, and Voronoi and other tessellations. NSF MRSEC DMR-1119826

  4. Self-polarizing terahertz liquid crystal phase shifter

    Directory of Open Access Journals (Sweden)

    Xiao-wen Lin

    2011-09-01

    Full Text Available Using sub-wavelength metallic gratings as both transparent electrodes and broadband high-efficiency polarizers, a highly-compact self-polarizing phase shifter is demonstrated by electrically tuning the effective birefringence of a nematic liquid crystal cell. The metal grating polarizers ensure a good polarizing efficiency in the range of 0.2 to 2 THz. Phase shift of more than π/3 is achieved in a 256 μm-thick cell with a saturation root mean square voltage of around 130 V in this integrated device.

  5. Theory of ion-chirality relation in ferroelectric liquid crystals

    Science.gov (United States)

    Lahiri, T.; Pal Majumder, T.

    2012-04-01

    The presence of impurity ions in ferroelectric liquid crystals (FLC) could produce a significant impact on the chirality of the medium with a possible modification in the polarization profile of the system. We theoretically observed these possibilities by considering an in-plane and bulk free energy density for the sample. Based on a suitable chirality transfer formalism, we explained the role of impurity ions in altering the chiral nature of a FLC medium. A continuous transition from modulated phases to uniform phases is also predicted within the framework of this theory. Then, we investigated the possible modification in the polarization profile driven by ionic impurities.

  6. Cholesteric liquid crystals as multi-purpose sensor materials

    Energy Technology Data Exchange (ETDEWEB)

    Lisetski, L. N. [National Academy of Sciences of Ukraine, Kharkov (Ukraine)

    2005-03-15

    New possibilities are discussed for Cholesteric Liquid Crystals (CLC) as sensor materials for detection of ionizing radiation, biologically active UV radiation, and the presence of hazardous vapors in atmosphere. A distinguishing property of CLC-based detectors is their 'bioequivalence', i.e., mechanisms of their response to external factors essentially imitate the corresponding mechanisms of biological tissues. Such detectors can ensure sufficiently high sensitivity to make feasible their use as alarm indicators or in biophysical studies. Specific examples are given of sensor compositions and their response characteristics.

  7. Tetrahedratic cross-couplings: novel physics for banana liquid crystals

    Science.gov (United States)

    Brand, Helmut R.; Pleiner, Harald; Cladis, P. E.

    2005-06-01

    Liquid crystal phases (LCs) formed by achiral bent-core molecules (banana LCs) are distinguishable from those of their classical (i.e., rod/disc-shaped) counterparts with only quadrupolar order. We argue that the interplay between tetrahedratic (octupolar) and quadrupolar order clarifies the physics of banana LCs sufficiently to account for two effects only observed in achiral banana LCs: a 100 times larger field-induced anisotropy than observed in classical LCs and ambidextrous chirality where left- and right-handed chiral domains co-exist.

  8. Self-Assembled Supramolecular Architectures Lyotropic Liquid Crystals

    CERN Document Server

    Garti, Nissim

    2012-01-01

    This book will describe fundamentals and recent developments in the area of Self-Assembled Supramolecular Architecture and their relevance to the  understanding of the functionality of  membranes  as delivery systems for active ingredients. As the heirarchial architectures determine their performance capabilities, attention will be paid to theoretical and design aspects related to the construction of lyotropic liquid crystals: mesophases such as lamellar, hexagonal, cubic, sponge phase micellosomes. The book will bring to the reader mechanistic aspects, compositional c

  9. The mathematics of instabilities in smectic C liquid crystals

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, D.A

    2001-07-01

    The theoretical effects of applying a magnetic or electric field to samples of smectic A and smectic C{sup *} liquid crystals are studied in this thesis. In Chapter 2 general background material on liquid crystals is introduced as well as the continuum theory which we shall use in subsequent chapters. We consider a planar sample of ferroelectric smectic C{sup *} liquid crystal in Chapter 3, where an electric field is applied perpendicular to the smectic layers. In particular, we obtain an exact solution to a dynamic equation which governs director reorientation (within a sample which is bounded in the z direction) which appears in the literature. We then consider the linear stability of this solution by applying a perturbation, in both space and time, and examine its growth. In Chapter 4 we again consider the stability of a planar sample of ferroelectric smectic C{sup *} when an electric field is applied perpendicular to the smectic planes. However, unlike in Chapter 3, we derive the relevant governing equation. After having introduced the relevant theory, the linear and nonlinear stability of a constant equilibrium state in both finite and infinite domains is examined. We then obtain information upon the relaxation times for each of these cases. The relaxation time gives an indication of how quickly the director relaxes back to equilibrium. The dynamic equation which is derived in Chapter 4 is extended in Chapter 5 to include the effects of lilting the applied electric field. The equilibrium equation which we then obtain is not tractable explicitly due to the form of the sinusoidal nonlinearity which appears in it. We therefore solve a simplified approximating dynamic equation as well as the full sinusoidal nonlinearity case numerically. In both cases the linear stability of the equilibrium solution is examined. Finally, in Chapter 6 we consider the layer deformations in a cylindrical sample of smectic A liquid crystal when a magnetic field is applied across the

  10. Topological Structure of Knotted Vortex Lines in Liquid Crystals

    Institute of Scientific and Technical Information of China (English)

    DUAN Yi-Shi; ZHAO Li; ZHANG Xin-Hui

    2007-01-01

    In this paper, a novel decomposition expression for the U(1) gauge field in liquid crystals (LCs) is derived.Using this decomposition expression and the φ-mapping topological current theory,.we investigate the topological structure of the vortex lines in LCs in detail. A topological invariant, i.e., the Chern-Simons (CS) action for the knotted vortex lines is presented, and the CS action is shown to be the total sum of all the self-linking and linking numbers of the knot family. Moreover, it is pointed out that the CS action is preserved in the branch processes of the knotted vortex lines.

  11. Fluctuation and Dissipation in Liquid-Crystal Electroconvection

    Science.gov (United States)

    Goldburg, Walter I.; Goldschmidt, Yadin Y.; Kellay, Hamid

    2001-12-01

    In this experiment a steady-state current is maintained through a liquid-crystal thin film. When the applied voltage is increased through a threshold, a phase transition is observed to a convective state characterized by the chaotic motion of rolls. Above the threshold, an increase in power consumption is observed that is manifested by an increase in the mean conductivity. A sharp increase in the ratio of the power fluctuations to the mean power dissipated is observed above the transition. This ratio is compared to the predictions of the fluctuation theorem of Gallavotti and Cohen using an effective temperature associated with the rolls' chaotic motion.

  12. Collective and molecular relaxation in ferroelectric liquid crystals

    Science.gov (United States)

    Wrobel, S.; Marzec, M.; Godlewska, Malgorzata; Gestblom, B.; Hiller, Steffen; Haase, Wolfgang

    1995-08-01

    Ferroelectric liquid crystals are molecular ferroelectrics showing up in the tilted liquid crystalline systems (SmC*, SmI*, SmF*) composed of chiral molecules. In this work, we present the dielectric, electro-optic, and calorimetric studies of a single component system: 3-octyloxy-6[2-fluor-4-(2-fluoroctyloxy)phenyl]-pyridine showing interesting ferroelectric properties. The compound exhibits a first order N*- SmC* phase transition which leads to a qualitatively new behavior, for instance the relaxation frequency of the soft mode below TC seems to be temperature independent. The high frequency relaxation process, connected with the reorientation around the long axis, is practically undisturbed at the N*-SmC* transition. Yet, it was found that in the SmC* phase, the best fit was obatined with two Cole-Cole functions yielding two relaxation times to describe a biased reorientation of molecules in the SmC* phase.

  13. Liquid Crystal Thermography Measurement Uncertainty Analysis and Its Application to Turbulent Heat Transfer Measurements

    Directory of Open Access Journals (Sweden)

    Yu Rao

    2012-01-01

    Full Text Available Liquid crystal thermography is an advanced nonintrusive measurement technique, which is capable of providing a high-accuracy continuous temperature field measurement, especially for a complex structured heat transfer surface. The first part of the paper presents a comprehensive introduction to the thermochromic liquid crystal material and the related liquid crystal thermography technique. Then, based on the aythors' experiences in using the liquid crystal thermography for the heat transfer measurement, the parameters affecting the measurement uncertainty of the liquid crystal thermography have been discussed in detail through an experimental study. The final part of the paper describes the applications of the steady and transient liquid crystal thermography technique in the study of the turbulent flow heat transfer related to the aeroengine turbine blade cooling.

  14. Fabrication of Nanopillar Micropatterns by Hybrid Mask Lithography for Surface-Directed Liquid Flow

    Directory of Open Access Journals (Sweden)

    Fumihito Arai

    2013-06-01

    Full Text Available This paper presents a novel method for fabricating nanopillar micropatterns for surface-directed liquid flows. It employs hybrid mask lithography, which uses a mask consisting of a combination of a photoresist and nanoparticles in the photolithography process. The nanopillar density is controlled by varying the weight ratio of nanoparticles in the composite mask. Hybrid mask lithography was used to fabricate a surface-directed liquid flow. The effect of the surface-directed liquid flow, which was formed by the air-liquid interface due to nanopillar micropatterns, was evaluated, and the results show that the oscillation of microparticles, when the micro-tool was actuated, was dramatically reduced by using a surface-directed liquid flow. Moreover, the target particle was manipulated individually without non-oscillating ambient particles.

  15. Study on Birefringent Color Generation for a Reflective Ferroelectric Liquid Crystal Display

    Science.gov (United States)

    Valyukh, Sergiy; Valyukh, Iryna; Xu, Peizhi; Chigrinov, Vladimir

    2006-10-01

    We study the possibility of a layer of a surface stabilized ferroelectric liquid crystal coupled with several retardation plates for birefringent color generation. Double and single polarizer reflective bistable dichromatic ferroelectric liquid crystal displays are considered. We demonstrate that one or two retardation plates are sufficient for a display having good color characteristics and high brightness. Optimal parameters for green/red and blue/yellow ferroelectric liquid crystal displays are found.

  16. Longitudinal stratified liquid crystal structures to enable practical spatial light modulators in the terahertz regime

    Science.gov (United States)

    Tareki, Abubaker M.; Kim, Wonkyu; Guo, Junpeng; Lindquist, Robert G.

    2016-09-01

    Electro-optic (EO) modulation of the amplitude and phase of electromagnetic waves using liquid crystals (LCs) is commonplace in the optical and infrared regions. This effort has led to commercially available components used in spectral filtering, polarization management, beam steering, transmitters, displays, etc. However, electro-optic techniques have had limited success in the terahertz (THz) region due to several practical design challenges. The growth in applications has led to an interest in the development of a spatial light modulator (SLM) for the terahertz region. In the visible region, the most common SLMs use electro-optic materials such as liquid crystals to spatially modulate a beam. However, this approach to achieve a practical SLM in the terahertz regime has been difficult. The primary barrier for components is the long interaction lengths required to modulate a THz wave. Since the EO modulation depth is directly proportional to the multiplication of the change of permittivity and the ratio of interaction length over wavelength, THz systems with wavelengths ranging from 150 μm to 1mm pose a challenge. To overcome this barrier, longitudinal stratified sub-wavelength liquid crystal structures have been engineered and fabricated. The stratified structures introduce the challenge in the selection and design of the electrodes. By using multiple layers the tunable films can be maintained at manageable thicknesses (25 to 200 μm). The reduced individual film thickness will significantly improve the requisite drive voltage and response time. However, the layered structure with multiple conducting layers adds considerable challenges to the design of the transparent electrode. Both simulation and experimental data will be presented.

  17. Polymer-stabilized blue phase liquid crystal display with slanted wall-shaped electrodes

    Institute of Scientific and Technical Information of China (English)

    Feng Zhou; Qionghua Wang; Di Wu; Jianpeng Cui

    2012-01-01

    A polymer-stabilized blue phase liquid crystal display (BPLCD) with slanted wall-shaped electrodes is proposed. Compared with the traditional BPLCD with wall-shaped electrodes, the electrodes of the proposed BPLCD are slightly angled to obtain phase retardation in the entire cell even at the position of electrodes. The proposed BPLCD demonstrates a relatively higher average transmittance and overall brightness than the traditional BPLCD.%A polymer-stabilized blue phase liquid crystal display (BPLCD) with slanted wall-shaped electrodes is proposed.Compared with the traditional BPLCD with wall-shaped electrodes,the electrodes of the proposed BPLCD are slightly angled to obtain phase retardation in the entire cell even at the position of electrodes.The proposed BPLCD demonstrates a relatively higher average transmittance and overall brightness than the traditional BPLCD.Owing to the continuous improvement in image quality of liquid crystal displays (LCDs),they have been widely employed in desktop monitors,TVs,and mobile displays at present[1-5].With the development of LCDs the polymer-stabilized blue phase LCDs (BPLCDs)[6-11]can replace the conventional LCDs and become the nextgeneration display technology.The polymer-stabilized BPLCDs have numerous attractive features,such as submillisecond gray-to-gray response time,alignmentlayer-free process optically isotropic dark state and cell gap insensitivity[12-14].Because of these advantages,the fabrication processes of the BPLCDs are simplified,motion-image blurs are reduced,and color-sequential displays using RGB LEDs are enabled.

  18. Polymeric THz 2D Photonic Crystal Filters Fabricated by Fiber Drawing

    DEFF Research Database (Denmark)

    Stecher, Matthias; Jansen, Christian; Ahmadi-Boroujeni, Mehdi

    2012-01-01

    In this paper, we report on a new form of polymeric 2D photonic crystal filters for THz frequencies fabricated using a standard fiber drawing technique. The band stop filters were modeled and designed using the generalized multipole technique. The frequency and angle-dependent transmission...

  19. Fabrication of Ordered Macroporous CdS and ZnS by Colloidal Crystal Template

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Ordered macroporous semiconductors CdS and ZnS with regular arrays of spherical pores have been fabricated by poly (styrene-acrylic) (PSA) colloidal crystal template. It was found that the exact three-dimensional (3D) structure of the template had been imprinted in the final material.

  20. Ultra-high-resolution time projection chambers with liquid crystal backplanes

    Energy Technology Data Exchange (ETDEWEB)

    Monreal, Benjamin

    2014-10-15

    We investigated the possibility of incorporating a liquid-crystal device into a gas ionization detector. After extensive R&D on several candidate liquid-crystal technologies, we developed some novel materials allowing twisted nematic liquid-crystal layers to be coupled directly to gas ionization counters. However, the resulting structures were unsuitable for large-scale or practical use. We tested several technologies known to result in mechanically-robust liquid crystal electrooptic layers, but found poor behavior in the detector context.

  1. Manufacturing, structure and properties of recycled polyethylene terephthalate /liquid crystal polymer/montmorillonite clay nanocomposites

    Science.gov (United States)

    Japins, Guntis; Berzina, Rita; Zicans, Janis; Merijs Meri, Remo; Ivanova, Tatjana; Kalkis, Valdis; Reinholds, Ingars

    2013-12-01

    Polyethylene terephthalate (PET)/liquid crystal polymer (LCP)/monthmorillonite clay (MMT) compositions were obtained by melt mixing. Their mechanical, structural, rheological and thermal properties were investigated.

  2. Elastic Torque and the Levitation of Metal Wires by a Nematic Liquid Crystal

    Science.gov (United States)

    Lapointe, C.; Hultgren, A.; Silevitch, D. M.; Felton, E. J.; Reich, D. H.; Leheny, R. L.

    2004-01-01

    Anisotropic particles suspended in a nematic liquid crystal disturb the alignment of the liquid crystal molecules and experience small forces that depend on the particles' orientation. We have measured these forces using magnetic nanowires. The torque on a wire and its orientation-dependent repulsion from a flat surface are quantitatively consistent with theoretical predictions based on the elastic properties of the liquid crystal. These forces can also be used to manipulate submicrometer-scale particles. We show that controlled spatial variations in the liquid crystal's alignment convert the torque on a wire to a translational force that levitates the wire to a specified height.

  3. Graphene in macroscopic order: liquid crystals and wet-spun fibers.

    Science.gov (United States)

    Xu, Zhen; Gao, Chao

    2014-04-15

    In nanotechnology, the creation of new nanoparticles consistently feeds back into efforts to design and fabricate new macroscopic materials with specific properties. As a two-dimensional (2D) building block of new materials, graphene has received widespread attention due to its exceptional mechanical, electrical, and thermal properties. But harnessing these attributes into new materials requires developing methods to assemble single-atom-thick carbon flakes into macroscopically ordered structures. Because the melt processing of carbon materials is impossible, fluid assembly is the only viable approach for meeting this challenge. But in the meantime, researchers need to solve two fundamental problems: creating orientational ordering in fluids and the subsequent phase-transformation from ordered fluids into ordered solid materials. To address these problems, this Account highlights our graphene chemistry methods that take advantage of liquid crystals to produce graphene fibers. We have successfully synthesized graphene oxide (GO) from graphite in a scalable manner. Using the size of graphite particles and post fractionation, we successfully tuned the lateral size of GO from submicron sizes to dozens of microns. Based on the rich chemistry of GO, we developed reliable methods for chemical or physical functionalization of graphene and produced a series of functionalized, highly soluble graphene derivatives that behave as single layers even at high concentrations. In the dispersive system of GO and functionalized graphenes, rich liquid crystals (LCs) formed spontaneously. Some of these liquid crystals had a conventional nematic phase with orientational order; others had a lamellar phase. Importantly, we observed a new chiral mesophase featuring a helical-lamellar structural model with frustrated disinclinations. The graphene-based LCs show ordered assembly behaviors in the fluid state of 2D colloids and lay a foundation for the design of ordered materials with optimal

  4. Adding Mono- and Multivalent Ions to Lyotropic Chromonic Liquid Crystals

    Science.gov (United States)

    Tortora, Luana; Park, Heung-Shik; Antion, Kelly; Woolwerton, Chris; Finotello, Daniele; Lavrentovich, Oleg

    2006-03-01

    Lyotropic Chromonic Liquid Crystals (LCLCs) are a distinct class of liquid crystals formed in aqueous solutions by molecules with rigid polyaromatic cores and ionic groups at the periphery [1-4]. The phase diagrams of these materials should depend on entropic factors (as in the Onsager model) and electrostatic interactions. Using optical polarizing microscopy, we studied the effects of mono- and multivalent ions on the phase diagrams of Blue 27 [3] and Sunset Yellow [2]. The monovalent ions change the temperatures of phase transitions, as described in [4], while the effect of multivalent ions is more dramatic and, in addition to the changed temperatures of phase transitions by tens of degrees, it often involves condensation of LCLC aggregates into domains with birefringence much higher than that in a normal nematic phase. Work supported by OBR B-7844. [1]J. Lydon, Current Opin. Colloid & Interface Sci. 3, 458 (1998);8, 480-489 (2004); [2]V. R. Horowitz, L. A. Janowitz, A. L. Modic, P. J. Heiney, and P. J. Collings, 2005, Phys. Rew. E 72, 041710; [3]Yu. A. Nastishin, H. Liu, T. Schneider, T., V. Nazarenko, R. Vasyuta, S. V. Shiyanovskii, and O. D. Lavrentovich, 2005, Phys. Rev. E 72, 041711; [4]A.F. Kostko, B. H. Cipriano, O. A. Pinchuk, L. Ziserman, M. A. Anisimov, D. Danino, and S. R. Raghavan. J. Phys. Chem. B 109, 19126-19133 (2005)

  5. Monodomain Blue Phase Liquid Crystal Layers for Phase Modulation

    Science.gov (United States)

    Oton, E.; Netter, E.; Nakano, T.; D.-Katayama, Y.; Inoue, F.

    2017-03-01

    Liquid crystal “Blue Phases” (BP) have evolved, in the last years, from a scientific curiosity to emerging materials for new photonic and display applications. They possess attractive features over standard nematic liquid crystals, like submillisecond switching times and polarization- independent optical response. However, BPs still present a number of technical issues that prevent their use in practical applications: their phases are only found in limited temperature ranges, thus requiring stabilization of the layers; stabilized BP layers are inhomogeneous and not uniformly oriented, which worsen the optical performance of the devices. It would be essential for practical uses to obtain perfectly aligned and oriented monodomain BP layers, where the alignment and orientation of the cubic lattice are organized in a single 3D structure. In this work we have obtained virtually perfect monodomain BP layers and used them in devices for polarization independent phase modulation. We demonstrate that, under applied voltage, well aligned and oriented layers generate smoother and higher values of the phase shift than inhomogeneous layers, while preserving polarization independency. All BP devices were successfully stabilized in BPI phase, maintaining the layer monodomain homogeneity at room temperature, covering the entire area of the devices with a unique BP phase.

  6. Monodomain Blue Phase Liquid Crystal Layers for Phase Modulation

    Science.gov (United States)

    Oton, E.; Netter, E.; Nakano, T.; D.-Katayama, Y.; Inoue, F.

    2017-01-01

    Liquid crystal “Blue Phases” (BP) have evolved, in the last years, from a scientific curiosity to emerging materials for new photonic and display applications. They possess attractive features over standard nematic liquid crystals, like submillisecond switching times and polarization- independent optical response. However, BPs still present a number of technical issues that prevent their use in practical applications: their phases are only found in limited temperature ranges, thus requiring stabilization of the layers; stabilized BP layers are inhomogeneous and not uniformly oriented, which worsen the optical performance of the devices. It would be essential for practical uses to obtain perfectly aligned and oriented monodomain BP layers, where the alignment and orientation of the cubic lattice are organized in a single 3D structure. In this work we have obtained virtually perfect monodomain BP layers and used them in devices for polarization independent phase modulation. We demonstrate that, under applied voltage, well aligned and oriented layers generate smoother and higher values of the phase shift than inhomogeneous layers, while preserving polarization independency. All BP devices were successfully stabilized in BPI phase, maintaining the layer monodomain homogeneity at room temperature, covering the entire area of the devices with a unique BP phase. PMID:28281691

  7. Interference forming of transmission by polymer dispersed liquid crystals

    Science.gov (United States)

    Maksimyak, P. P.; Nehrych, A. L.

    2013-12-01

    The methods of correlation optics are for the first time applied to study structure of liquid crystal (LC) - polymer (P) composites at various concentrations of LC and P. Their phase correlation function (PCF) was obtained considering LC-P composite as a random phase screen. The amplitude of PCF contains information about number of LC domains and structure of LC director inside of them, while a half-width of this function is connected with a size of these domains. We studied unpowered and powered composite layers with a thickness of 5 μm. As liquid crystal and polymer were used nematic LC E7 from Merck and photopolymer composition NOA65 from Norland. Concentration of polymer ϕP was varied in a range 10-55 vol. %. In good agreement with previous studies by SEM technique we detected monotone decrease of LC domains with concentration of polymer. With application of electric field, amplitude of PCF behaves differently for the samples with different polymer content. For the samples with ϕPLC), this dependence is monotonic. In turn, if ϕPLC morphology), the amplitude of PCF non-monotonically depends on the applied voltage going through a maximum. The latter fact is explained by transformation of orientational defects of LC phase with the applied voltage.

  8. Correlation measurements of light transmittance in polymer dispersed liquid crystals

    Science.gov (United States)

    Maksimyak, P. P.; Nehrych, A. L.

    2015-11-01

    The methods of correlation optics are for the first time applied to study structure of liquid crystal (LC) - polymer (P) composites at various concentrations of LC and P. Their phase correlation function (PCF) was obtained considering LC-P composite as a random phase screen. The amplitude of PCF contains information about number of LC domains and structure of LC director inside of them, while a half-width of this function is connected with a size of these domains. We studied unpowered and powered composite layers with a thickness of 5 μm. As liquid crystal and polymer were used nematic LC E7 from Merck and photopolymer composition NOA65 from Norland. Concentration of polymer φP was varied in a range 10-55 vol. %. In good agreement with previous studies by SEM technique we detected monotone decrease of LC domains with concentration of polymer. With application of electric field, amplitude of PCF behaves differently for the samples with different polymer content. For the samples with φP>35 vol. % (samples having morphology of polymer dispersed LC), this dependence is monotonic. In turn, if φPLC morphology), the amplitude of PCF non-monotonically depends on the applied voltage going through a maximum. The latter fact is explained by transformation of orientational defects of LC phase with the applied voltage.

  9. Surface dynamics and mechanics in liquid crystal polymer coatings

    Science.gov (United States)

    Liu, Danqing; Broer, Dirk J.

    2015-03-01

    Based on liquid crystal networks we developed `smart' coatings with responsive surface topographies. Either by prepatterning or by the formation of self-organized structures they can be switched on and off in a pre-designed manner. Here we provide an overview of our methods to generate coatings that form surface structures upon the actuation by light. The coating oscillates between a flat surface and a surface with pre-designed 3D micro-patterns by modulating a light source. With recent developments in solid state lighting, light is an attractive trigger medium as it can be integrated in a device for local control or can be used remotely for flood or localized exposure. The basic principle of formation of surface topographies is based on the change of molecular organization in ordered liquid crystal polymer networks. The change in order leads to anisotropic dimensional changes with contraction along the director and expansion to the two perpendicular directions and an increase in volume by the formation of free volume. These two effects work in concert to provide local expansion and contraction in the coating steered by the local direction of molecular orientation. The surface deformation, expressed as the height difference between the activated regions and the non-activated regions divided by the initial film thickness, is of the order of 20%. Switching occurs immediately when the light is switched `on' and `off' and takes several tens of seconds.

  10. High frequency PMN-PT single crystal focusing transducer fabricated by a mechanical dimpling technique.

    Science.gov (United States)

    Chen, Y; Lam, K H; Zhou, D; Cheng, W F; Dai, J Y; Luo, H S; Chan, H L W

    2013-02-01

    High frequency (∼30MHz and ∼80MHz) focusing ultrasound transducers were fabricated using a PMN-0.28PT single crystal by a mechanical dimpling technique. The dimpled single crystal was used as an active element for the focusing transducer. Compared with a plane transducer, the focusing transducer fabricated with a dimpled active element exhibits much broader bandwidth and higher sensitivity. Besides, a high quality image can be obtained by the 30MHz focusing transducer, in which the -6dB axial and lateral resolution is 27μm and 139μm, respectively. These results prove that the dimpling technique is capable to fabricate the high frequency focusing transducers with excellent performance for imaging applications.

  11. Ultrahigh-Q optomechanical crystal cavities fabricated in a CMOS foundry.

    Science.gov (United States)

    Benevides, Rodrigo; Santos, Felipe G S; Luiz, Gustavo O; Wiederhecker, Gustavo S; Alegre, Thiago P Mayer

    2017-05-30

    Photonic crystals use periodic structures to create frequency regions where the optical wave propagation is forbidden, which allows the creation and integration of complex optical functionalities in small footprint devices. Such strategy has also been successfully applied to confine mechanical waves and to explore their interaction with light in the so-called optomechanical cavities. Because of their challenging design, these cavities are traditionally fabricated using dedicated high-resolution electron-beam lithography tools that are inherently slow, limiting this solution to small-scale or research applications. Here we show how to overcome this problem by using a deep-UV photolithography process to fabricate optomechanical crystals in a commercial CMOS foundry. We show that a careful design of the photonic crystals can withstand the limitations of the photolithography process, producing cavities with measured intrinsic optical quality factors as high as Q i  = (1.21 ± 0.02) × 10(6). Optomechanical crystals are also created using phononic crystals to tightly confine the GHz sound waves within the optical cavity, resulting in a measured vacuum optomechanical coupling rate of g 0 = 2π × (91 ± 4) kHz. Efficient sideband cooling and amplification are also demonstrated since these cavities are in the resolved sideband regime. Further improvements in the design and fabrication process suggest that commercial foundry-based optomechanical cavities could be used for quantum ground-state cooling.

  12. Fabrication and characterization of PbSe nanostructures on van der Waals surfaces of GaSe layered semiconductor crystals

    Science.gov (United States)

    Kudrynskyi, Z. R.; Bakhtinov, A. P.; Vodopyanov, V. N.; Kovalyuk, Z. D.; Tovarnitskii, M. V.; Lytvyn, O. S.

    2015-11-01

    The growth morphology, composition and structure of PbSe nanostructures grown on the atomically smooth, clean, nanoporous and oxidized van der Waals (0001) surfaces of GaSe layered crystals were studied by means of atomic force microscopy, x-ray diffractometry, photoelectron spectroscopy and Raman spectroscopy. Semiconductor heterostructures were grown by the hot-wall technique in vacuum. Nanoporous GaSe substrates were fabricated by the thermal annealing of layered crystals in a molecular hydrogen atmosphere. The irradiation of the GaSe(0001) surface by UV radiation was used to fabricate thin Ga2O3 layers with thickness clusters with a square or rectangular symmetry on the clean low-energy (0001) GaSe surface, and (001)-oriented growth of PbSe thin films takes place on this surface. Using this growth technique it is possible to grow PbSe nanostructures with different morphologies: continuous epitaxial layers with thickness quantum dots with a high lateral density (more than 1011 cm-2) on the oxidized van der Waals (0001) surfaces and faceted square pillar-like nanostructures with a low lateral density (˜108 cm-2) on the nanoporous GaSe substrates. We exploit the ‘vapor-liquid-solid’ growth with low-melting metal (Ga) catalyst of PbSe crystalline branched nanostructures via a surface-defect-assisted mechanism.

  13. Direct anisotropic growth of CdS nanocrystals in thermotropic liquid crystal templates for heterojunction optoelectronics.

    Science.gov (United States)

    Yuan, Kai; Chen, Lie; Chen, Yiwang

    2014-09-01

    The direct growth of CdS nanocrystals in functional solid-state thermotropic liquid crystal (LC) small molecules and a conjugated LC polymer by in situ thermal decomposition of a single-source cadmium xanthate precursor to fabricate LC/CdS hybrid nanocomposites is described. The influence of thermal annealing temperature of the LC/CdS precursors upon the nanomorphology, photophysics, and optoelectronic properties of the LC/CdS nanocomposites is systematically studied. Steady-state PL and ultrafast emission dynamics studies show that the charge-transfer rates are strongly dependent on the thermal annealing temperature. Notably, annealing at liquid-crystal state temperature promotes a more organized nanomorphology of the LC/CdS nanocomposites with improved photophysics and optoelectronic properties. The results confirm that thermotropic LCs can be ideal candidates as organization templates for the control of organic/inorganic hybrid nanocomposites at the nanoscale level. The results also demonstrate that in situ growth of semiconducting nanocrystals in thermotropic LCs is a versatile route to hybrid organic/inorganic nanocomposites and optoelectronic devices.

  14. Electrically tunable two-dimensional holographic polymer-dispersed liquid crystal grating with variable period

    Science.gov (United States)

    Wang, Kangni; Zheng, Jihong; Liu, Yourong; Gao, Hui; Zhuang, Songlin

    2017-06-01

    An electrically tunable two-dimensional (2D) holographic polymer-dispersed liquid crystal (H-PDLC) grating with variable period was fabricated by inserting a cylindrical lens in a conventional holographic interference beam. The interference between the plane wave and cylindrical wave resulting in varying intersection angles on the sample, combined with dual exposure along directions perpendicular to each other, generates a 2D H-PDLC grating with varied period. We have identified periods varying from 3.109 to 5.158 μm across a 16 mm width, with supporting theoretical equations for the period. The period exhibits a symmetrical square lattice in a diagonal direction, with an asymmetrical rectangular lattice in off-diagonal locations. With the first exposure at 2 s and the second exposure at 60 s, the phase separation between the prepolymer and liquid crystal was most evident. The diffraction properties and optic-electric characteristics were also studied. The diffraction efficiency of first-order light was observed to be 13.5% without external voltage, and the transmission efficiency of non-diffracted light was 78% with an applied voltage of 100 V. The proposed method provides the capability of generating period variation to the conventional holographic interference path, with potential application in diffractive optics such as tunable multi-wavelength organic lasing from a dye-doped 2D H-PDLC grating.

  15. Reverse switching of surface roughness in a self-organized polydomain liquid crystal coating.

    Science.gov (United States)

    Liu, Danqing; Liu, Ling; Onck, Patrick R; Broer, Dirk J

    2015-03-31

    In this work we propose randomly ordered polydomain nematic liquid crystal polymer networks to reversibly generate notable jagged relief patterns at a polymer coating surface by light illumination. The domain size is controlled by the addition of traces of partly insoluble fluorinated acrylate. The photoresponse of the coating is induced by a small amount of copolymerized azobenzene monomers. Upon exposure to UV light, azobenzene undergoes trans to cis isomerization, resulting in a change in molecular order and packing within each domain. The extent of this effect and its directionality depends on the domain orientation. Localized to domain level, this morphological change forms large 3D spikes at the surface with a modulation amplitude of more than 20% of the initial thickness. The process is reversible; the surface topographical patterns erase within 10 s by stopping the light exposure. A finite element model is applied to simulate the surface topography changes of the polydomain coating. The simulations describe the formation of the topographic features in terms of light absorption and isomerization process as a function of the director orientation. The random director distribution leads to surface structures which were found to be in close agreement with the ones measured by interference microscopy. The effect of domain size on surface roughness and depth modulation was explored and related to the internal mechanical constraints. The use of nematic liquid crystal polydomains confined in a polymer network largely simplifies the fabrication of smart coatings with a prominent triggered topographic response.

  16. Direct induction of molecular alignment in liquid crystal polymer network film by photopolymerization

    Science.gov (United States)

    Hisano, K.; Aizawa, M.; Ishizu, M.; Kurata, Y.; Shishido, A.

    2016-09-01

    Liquid crystal (LC) is the promising material for the fabrication of high-performance soft, flexible devices. The fascinating and useful properties arise from their cooperative effect that inherently allows the macroscopic integration and control of molecular alignment through various external stimuli. To date, light-matter interaction is the most attractive stimuli and researchers developed photoalignment through photochemical or photophysical reactions triggered by linearly polarized light. Here we show the new choice based on molecular diffusion by photopolymerization. We found that photopolymerization of a LC monomer and a crosslinker through a photomask enables to direct molecular alignment in the resultant LC polymer network film. The key generating the molecular alignment is molecular diffusion due to the difference of chemical potentials between irradiated and unirradiated regions. This concept is applicable to various shapes of photomask and two-dimensional molecular alignments can be fabricated depending on the spatial design of photomask. By virtue of the inherent versatility of molecular diffusion in materials, the process would shed light on the fabrication of various high-performance flexible materials with molecular alignment having controlled patterns.

  17. Natural olivine crystal-fabrics in the western Pacific convergence region: A new method to identify fabric type

    Science.gov (United States)

    Michibayashi, Katsuyoshi; Mainprice, David; Fujii, Ayano; Uehara, Shigeki; Shinkai, Yuri; Kondo, Yusuke; Ohara, Yasuhiko; Ishii, Teruaki; Fryer, Patricia; Bloomer, Sherman H.; Ishiwatari, Akira; Hawkins, James W.; Ji, Shaocheng

    2016-06-01

    Crystallographic preferred orientations (CPOs) of olivine within natural peridotites are commonly depicted by pole figures for the [100], [010], and [001] axes, and they can be categorized into five well-known fabric types: A, B, C, D, and E. These fabric types can be related to olivine slip systems: A with (010)[100], B with (010)[001], C with (001)[001], D with {0kl}[100], and E with (001)[100]. In addition, an AG type is commonly found in nature, but its origin is controversial, and could involve several contributing factors such as complex slip systems, non-coaxial strain types, or the effects of melt during plastic flow. In this paper we present all of our olivine fabric database published previously as well as new data mostly from ocean floor, mainly for the convergent margin of the western Pacific region, and we introduce a new index named Fabric-Index Angle (FIA), which is related to the P-wave property of a single olivine crystal. The FIA can be used as an alternative to classifying the CPOs into the six fabric types, and it allows a set of CPOs to be expressed as a single angle in a range between -90° and 180°. The six olivine fabric types have unique values of FIA: 63° for A type, -28° for B type, 158° for C type, 90° for D type, 106° for E type, and 0° for AG type. We divided our olivine database into five tectonic groups: ophiolites, ridge peridotites, trench peridotites, peridotite xenoliths, and peridotites enclosed in high-pressure metamorphic rocks. Our results show that although our database is not yet large enough (except for trench peridotites) to define the characteristics of the five tectonic groups, the natural olivine fabrics vary in their range of FIA: 0° to 150° for the ophiolites, 40° to 80° for the ridge peridotites, -40° to 100° for the trench peridotites, 0° to 100° for the peridotite xenoliths, and -40° to 10° for the peridotites enclosed in high-pressure metamorphic rocks. The trench peridotites show a statistically

  18. Superfluorinated Ionic Liquid Crystals Based on Supramolecular, Halogen-Bonded Anions.

    Science.gov (United States)

    Cavallo, Gabriella; Terraneo, Giancarlo; Monfredini, Alessandro; Saccone, Marco; Priimagi, Arri; Pilati, Tullio; Resnati, Giuseppe; Metrangolo, Pierangelo; Bruce, Duncan W

    2016-05-17

    Unconventional ionic liquid crystals in which the liquid crystallinity is enabled by halogen-bonded supramolecular anions [Cn F2 n+1 -I⋅⋅⋅I⋅⋅⋅I-Cn F2 n+1 ](-) are reported. The material system is unique in many ways, demonstrating for the first time 1) ionic, halogen-bonded liquid crystals, and 2) imidazolium-based ionic liquid crystals in which the occurrence of liquid crystallinity is not driven by the alkyl chains of the cation.

  19. Cholesteric liquid crystal formation in suspensions of cellulose nanocrystals

    Science.gov (United States)

    Honorato-Rios, Camilla; Bruckner, Johanna; Schütz, Christina; Wagner, Sammy; Tosheva, Zornitza; Bergström, Lennart; Lagerwall, Jan P. F.

    With the strong current trend in nanotechnology to focus on sustainably produced nanomaterials, cellulose nanocrystals (CNC) are emerging as a particularly interesting candidate. They are mechanically strong, optically transparency and birefringent, have low weight and low thermal expansion coefficient. A most desirable feature of CNC is that aqueous suspensions form cholesteric liquid crystal phases already at low concentration, and when dried into thin solid films, the periodicity of the helical structure can be reduced to the range of visible selective reflection, in practice making the film a photonic crystal paper. We begin the chapter by briefly explaining how CNC is extracted from cellulose-rich bioresources, followed by a summary of the typical characteristics in terms of dimensions and surface charge, and how these depend on the production method. The current understanding of the phase diagram of CNC suspensions is then discussed, from the low-concentration regime around the isotropic-cholesteric transition to the less well understood regime where the system is kinetically arrested in a non-equilibrium state. We discuss the influences on phase behavior and cholesteric pitch of the solvent and its ionic strength. Finally, we discuss the production of photonic crystal films and we give a brief outlook.

  20. Rapid Fabrication Techniques for Liquid Rocket Channel Wall Nozzles

    Science.gov (United States)

    Gradl, Paul R.

    2016-01-01

    The functions of a regeneratively-cooled nozzle are to (1) expand combustion gases to increase exhaust gas velocity while, (2) maintaining adequate wall temperatures to prevent structural failure, and (3) transfer heat from the hot gases to the coolant fluid to promote injector performance and stability. Regeneratively-cooled nozzles are grouped into two categories: tube-wall nozzles and channel wall nozzles. A channel wall nozzle is designed with an internal liner containing a series of integral coolant channels that are closed out with an external jacket. Manifolds are attached at each end of the nozzle to distribute coolant to and away from the channels. A variety of manufacturing techniques have been explored for channel wall nozzles, including state of the art laser-welded closeouts and pressure-assisted braze closeouts. This paper discusses techniques that NASA MSFC is evaluating for rapid fabrication of channel wall nozzles that address liner fabrication, slotting techniques and liner closeout techniques. Techniques being evaluated for liner fabrication include large-scale additive manufacturing of freeform-deposition structures to create the liner blanks. Abrasive water jet milling is being evaluated for cutting the complex coolant channel geometries. Techniques being considered for rapid closeout of the slotted liners include freeform deposition, explosive bonding and Cold Spray. Each of these techniques, development work and results are discussed in further detail in this paper.