WorldWideScience

Sample records for faa vertical bunsen

  1. Bunsen's Batteries and the Electric Arc.

    Science.gov (United States)

    Stock, John T.

    1995-01-01

    Traces the history of the observation of the production of electric sparks and the early history of battery design. Detail is provided about laboratory experiments performed by Robert Bunsen, who spent a great deal of time developing an efficient and comparatively cheap battery. (36 references) (DDR)

  2. Design options for a bunsen reactor.

    Energy Technology Data Exchange (ETDEWEB)

    Moore, Robert Charles

    2013-10-01

    This work is being performed for Matt Channon Consulting as part of the Sandia National Laboratories New Mexico Small Business Assistance Program (NMSBA). Matt Channon Consulting has requested Sandia's assistance in the design of a chemical Bunsen reactor for the reaction of SO2, I2 and H2O to produce H2SO4 and HI with a SO2 feed rate to the reactor of 50 kg/hour. Based on this value, an assumed reactor efficiency of 33%, and kinetic data from the literature, a plug flow reactor approximately 1%E2%80%9D diameter and and 12 inches long would be needed to meet the specification of the project. Because the Bunsen reaction is exothermic, heat in the amount of approximately 128,000 kJ/hr would need to be removed using a cooling jacket placed around the tubular reactor. The available literature information on Bunsen reactor design and operation, certain support equipment needed for process operation and a design that meet the specification of Matt Channon Consulting are presented.

  3. A refuge for inorganic chemistry: Bunsen's Heidelberg laboratory.

    Science.gov (United States)

    Nawa, Christine

    2014-05-01

    Immediately after its opening in 1855, Bunsen's Heidelberg laboratory became iconic as the most modern and best equipped laboratory in Europe. Although comparatively modest in size, the laboratory's progressive equipment made it a role model for new construction projects in Germany and beyond. In retrospect, it represents an intermediate stage of development between early teaching facilities, such as Liebig's laboratory in Giessen, and the new 'chemistry palaces' that came into existence with Wöhler's Göttingen laboratory of 1860. As a 'transition laboratory,' Bunsen's Heidelberg edifice is of particular historical interest. This paper explores the allocation of spaces to specific procedures and audiences within the laboratory, and the hierarchies and professional rites of passage embedded within it. On this basis, it argues that the laboratory in Heidelberg was tailored to Bunsen's needs in inorganic and physical chemistry and never aimed at a broad-scale representation of chemistry as a whole. On the contrary, it is an example of early specialisation within a chemical laboratory preceding the process of differentiation into chemical sub-disciplines. Finally, it is shown that the relatively small size of this laboratory, and the fact that after ca. 1860 no significant changes were made within the building, are inseparably connected to Bunsen's views on chemistry teaching.

  4. Inertial particles in a turbulent premixed Bunsen flame

    Energy Technology Data Exchange (ETDEWEB)

    Battista, F.; Picano, F.; Casciola, C.M. [Sapienza Univ., Rome (Italy). Dipt. di Meccanica e Aeronautica; Troiani, G. [ENEA C.R. Casaccia, Rome (Italy)

    2012-07-01

    Many fields of engineering and physics are characterized by reacting flows seeded with particles of different inertia and dimensions, e.g. solid-propellant rockets, reciprocating engines where carbon particles form due to combustion, vulcano eruptions. Particles are also used as velocity transducers in Particle Image Velocimetry (PIV) of turbulent flames. The effects of combustion on inertial particle dynamics is still poorly understood, despite its relevance for its effects on particle collisions and coalescence, phenomena which have a large influence in soot formation and growth. As a matter of fact, the flame front induces abrupt accelerations of the fluid in a very thin region which particles follow with different lags depending on their inertia. This phenomenon has a large impact on the particle spatial arrangement. The issuing clustering is here analyzed by a DNS of Bunsen turbulent flame coupled with particle Lagrangian tracking with the aim of evaluating the effect of inertia on particle spatial localization in combustion applications. The Eulerian algorith is based on Low-Mach number expansion of Navier-Stokes equations that allow arbitrary density variations neglecting acoustics waves. (orig.)

  5. Bunsen conference 1999. Atmospheric physical chemistry; Bunsentagung 1999. Physikalische Chemie der Atmosphaere

    Energy Technology Data Exchange (ETDEWEB)

    Crutzen, P.J.; Zellner, R. [comps.

    2000-07-01

    The main subject of the 1999 Bunsen conference was atmospheric physical chemistry. There were lectures and posters on measurement and distribution of atmospheric trace gases, photochemical reactions in the different parts of the atmosphere, natural and anthropogenic emissions resulting from biomass combustion, thermodynamics and microphysics of aerosol, and air pollution abatement. [German] Die Bunsentagung 1999 beschaeftigte sich mit dem Thema Physikalische Chemie der Atmosphaere. Themen der Vortraege und Poster waren u.a. die Messung und Verteilung von Spurengasen in der Atmosphaere, photochemische Reaktionen in den verschiedenen Schichten der Atmosphaere, natuerliche und anthropogene Emissionen durch Verbrennung von Biomasse, Thermodynamik und Microphysik von Aerosolen und Klimaschutz.

  6. Towards FAA Certification of UAVs

    Science.gov (United States)

    Nelson, Stacy

    2003-01-01

    As of June 30, 2003, all Unmanned Aerial Vehicles (UAV), no matter how small, must adhere to the same FAA regulations as human-piloted aircraft. These regulations include certification for flying in controlled airspace and certification of flight software based on RTCA DO-178B. This paper provides an overview of the steps necessary to obtain certification, as well as a discussion about the challenges UAV's face when trying to meet these requirements. It is divided into two parts: 1) Certifications for Flying in Controlled Airspace; 2) Certification of Flight Software per RTCA DO-178B.

  7. Occurrence of the Bunsen side reaction in the sulfur-iodine thermochemical cycle for hydrogen production

    Institute of Scientific and Technical Information of China (English)

    Qiao-qiao ZHU; Yan-wei ZHANG; Zhi YING; Jun-hu ZHOU; Zhi-hua WANG; Ke-fa CEN

    2013-01-01

    This study aimed to establish a closed-cycle operation technology with high thermal efficiency in the thermochemical sulfur-iodine cycle for large-scale hydrogen production.A series of experimental studies were performed to investigate the occurrence of side reactions in both the H2SO4 and HIx phases from the H2SO4/HI/I2/H2O quaternary system within a constant temperature range of 323-363 K.The effects of iodine content,water content and reaction temperature on the side reactions were evaluated.The results showed that an increase in the reaction temperature promoted the side reactions.However,they were prevented as the iodine or water content increased.The occurrence of side reactions was faster in kinetics and more intense in the H2SO4 phase than in the HIx phase.The sulfur or hydrogen sulfide formation reaction or the reverse Bunsen reaction was validated under certain conditions.

  8. Tip opening of premixed bunsen flames: Extinction with negative stretch and local Karlovitz number

    KAUST Repository

    Vu, Tranmanh

    2015-04-01

    The characteristics of tip openings in premixed bunsen flames have been studied experimentally by measuring OH radicals from laser-induced fluorescence and tip curvatures from chemiluminescent images. Results showed that the tip opening occurred at a constant equivalence ratio and was independent of the jet velocity in propane/air mixtures. The observation of a local extinction phenomenon of the negatively stretched flame due to the flame curvature could not be consistently explained based on flame stretch or the Karlovitz number, since they varied appreciably with the jet velocity. The concept of the local Karlovitz number (KaL) was introduced, which is defined as the ratio of the characteristic reaction time in the normal direction for a stretched flame to the characteristic flow time in the tangential direction for the stretched flame. The local Karlovitz number maintained a constant value under tip opening conditions, irrespective of the jet velocity. Tip opening occurred at a reasonably constant local Karlovitz number of about ~1.72 when the nitrogen dilution level in propane and n-butane fuels was varied.

  9. Effect of AC electric fields on the stabilization of premixed bunsen flames

    KAUST Repository

    Kim, Minkuk

    2011-01-01

    The stabilization characteristics of laminar premixed bunsen flames have been investigated experimentally for stoichiometric methane-air mixture by applying AC voltage to the nozzle with the single-electrode configuration. The detachment velocity either at blowoff or partial-detachment has been measured by varying the applied voltage and frequency of AC. The result showed that the detachment velocity increased with the applied AC electric fields, such that the flame could be nozzle-attached even over five times of the blowoff velocity without having electric fields. There existed four distinct regimes depending on applied AC voltage and frequency. In the low voltage regime, the threshold condition of AC electric fields was identified, below which the effect of electric fields on the detachment velocity is minimal. In the moderate voltage regime, the flame base oscillated with the frequency synchronized to AC frequency and the detachment velocity increased linearly with the applied AC voltage and nonlinearly with the frequency. In the high voltage regime, two different sub-regimes depending on AC frequency were observed. For relatively low frequency, the flame base oscillated with the applied AC frequency together with the half frequency and the variation of the detachment velocity was insensitive to the applied voltage. For relatively high frequency, the stabilization of the flame was significantly affected by the generation of streamers and the detachment velocity decreased with the applied voltage. © 2010 Published by Elsevier Inc. on behalf of The Combustion Institute. All rights reserved.

  10. A contribuição de Robert Wilhelm Bunsen e Gustav Robert Kirchhoff para a espectroscopia do século XIX

    OpenAIRE

    Pirolo, Marcelo

    2010-01-01

    Esta dissertação aborda o trabalho de dois pesquisadores alemães, Robert Wilhelm Bunsen e Gustav Robert Kirchhoff que, no século XIX, fizeram uma síntese dos procedimentos em utilizados em espectroscopia até o momento, modificando alguns métodos e auxiliando numa melhor compreensão e análise da luz emitida por materiais incandescentes. Após alguns experimentos desenvolvidos com Henry Roscoe sobre fotoquímica, Bunsen dedicou-se, juntamente com Kirchhoff, às análises espectrais. A espectroscopi...

  11. From Bunsen Burners to Fuel Cells: Invoking Energy Transducers to Exemplify "Paths" and Unify the Energy-Related Concepts of Thermochemistry and Thermodynamics

    Science.gov (United States)

    Hladky, Paul W.

    2009-01-01

    The conversion of chemical energy entirely into thermal energy by Bunsen burners and into thermal energy and electrical energy by fuel cells of varying efficiencies illustrates different paths by which a chemical reaction can occur. Using the efficiency of producing electrical energy as a path label allows all of the energy-related quantities to…

  12. BUNSEN BEKİ VE SPEKTRAL ANALİZİN DOĞUŞU VE TÜRKİYE’DE TANITILMASI

    OpenAIRE

    Dölen, Emre

    2011-01-01

    Onsekizinci yüzyılın ikinci yarısında Fransa‟da ve İngiltere‟de aydınlatmada kullanmak üzere havagazı üretilmeye başlanmış ve bu gazın borular ile dağıtımı neticesinde, ondokuzuncu yüzyılda Avrupa şehirlerinde gaz lambalarının kullanımı giderek yaygınlaşmıştır. Ondokuzuncu yüzyılın önde gelen kimyagerlerinden Robert Wilhelm Bunsen (1811–1899), sezyum ve rubidyum elementlerini keşfetmiş, spektral analiz kanunlarını ortaya koymuş olmanın yanı sıra, laboratuar araç-gereçleri icad etmede ve geliş...

  13. Assessment of Proposed Cab Glass Coating for FAA Control Towers

    Science.gov (United States)

    2015-11-16

    To) Jun 2012 – Jun 2013 4. TITLE AND SUBTITLE Evaluation of Proposed Cab Glass Coating for FAA Control Towers 5a. CONTRACT NUMBER In- House 5b...Lite 2: 12CL N/A C 12"x12"x1 1/2" Insulated; 1/2" STARPHIRE; .060 CLEAR PVB; 1/2" STARPHIRE Bubble Pack Sheet Stuck to Surface N/A D 12...determine if this improvement (if any) degrades over time. Participants: In- house Wright-Patterson personnel and/or FAA-provided “guest

  14. Upgraded FAA Airfield Capacity Model Compiled from the Following Reports: FAA-RD-76-128 and FAA-EM-81-1-VOL-1

    Science.gov (United States)

    1981-05-01

    Arrival-Arrival Separations: DLTAIJ: 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 103 ** FAA CAPACITY MODEL - REVISED JANUARY, 1980 ** "t AIRFIELD HOURLY CAPACITY MODELO ...OLTEI:N1IIi Alifl1AL D1LAY rOi, z.rIrf XIJAL DEIIAjiD? 110- D’O YOU 1’ ISI ( TO FILIWRPNl ANOTHER1 CALCIAIVIO:1? 110! rIGU~n 6-3 (Cont.) 178 CHAPTER 7 - ON

  15. First Annual FAA General Aviation Forecast Conference Proceedings

    Science.gov (United States)

    1991-03-01

    pilot’s perspective. I have a 30-year background as an executive in communications, principally in television , but I am also an aircraft owner and have...contrasting this with the business I came from -- television , which is gauged and governed by the TV rating business, which includes overnight ratings. We...ago following the Ceritos, California midair collision between a general aviation aircraft and a Mexicana airliner, the FAA released a study calling for

  16. The Acyl-CoA synthetases encoded within FAA1 and FAA4 in Saccharomyces cerevisiae function as components of the fatty acid transport system linking import, activation, and intracellular Utilization

    DEFF Research Database (Denmark)

    Færgeman, Nils J.; Black, P N; Zhao, X D

    2001-01-01

    Exogenous long-chain fatty acids are activated to coenzyme A derivatives prior to metabolic utilization. In the yeast Saccharomyces cerevisiae, the activation of these compounds prior to metabolic utilization proceeds through the fatty acyl-CoA synthetases Faa1p and Faa4p. Faa1p or Faa4p are esse...

  17. Effect of electric fields on the stabilization of premixed laminar bunsen flames at low AC frequency: Bi-ionic wind effect

    KAUST Repository

    Kim, Minkuk

    2012-03-01

    The stabilization characteristics of laminar premixed bunsen flames have been investigated experimentally by applying AC electric fields at low frequency below 60. Hz together with DC in the single electrode configuration. The blowoff velocity has been measured for varying AC voltage and frequency. A transition frequency between low and high frequency regimes has been identified near 40-50. Hz, where AC electric fields have minimal effect on flame stabilization. In the low frequency regime, the blowoff velocity decreased linearly with AC voltage such that the flames became less stable. This was consistent with the DC result, implying the influence of the ionic wind effect. The variation of blowoff velocity with AC frequency showed a non-monotonic behavior in that the velocity decreased and then increased, exhibiting minimum blowoff velocity near 6-8. Hz. Based on the molecular kinetic theory, the developing degree of ionic wind was derived. By considering the ionic wind effects arising from both positive and negative ions in a flame zone, the bi-ionic wind effect successfully explained the non-monotonic behavior of blowoff velocity with AC frequency in the low frequency regime. © 2011 The Combustion Institute.

  18. FAA-NASA Sixth International Conference on the Continued Airworthiness of Aircraft Structures

    Science.gov (United States)

    1995-12-01

    British Airways Human Factors in Aviation Maintenance: Current FAA Research .............................. 91 William T. Shepherd, Federal Aviation...Development of Advanced Structural Analysis Methodologies for Predicting W idespread Fatigue Damage in Aircraft Structures...where satellite communications to transmit aircraft position data derived from GPS directly to controllers via data link. On June 21, FAA and Qantas

  19. 78 FR 63276 - Interim Policy, FAA Review of Solar Energy System Projects on Federally Obligated Airports

    Science.gov (United States)

    2013-10-23

    ... Federal Aviation Administration Interim Policy, FAA Review of Solar Energy System Projects on Federally... federally obligated airports to construct solar energy systems on airport property. FAA is adopting an... for measuring ocular impact of proposed solar energy systems which are effective upon publication....

  20. Vertical Bisimulation

    NARCIS (Netherlands)

    Rensink, Arend; Gorrieri, Roberto

    We investigate criteria to relate specifications and implementations belonging to conceptually different abstraction levels, and propose vertical bisimulation as a candidate relation for this purpose. Vertical bisimulation is indexed by a function mapping abstract actions onto concrete processes,

  1. Federal Aviation Administration (FAA airworthiness certification for ceramic matrix composite components in civil aircraft systems

    Directory of Open Access Journals (Sweden)

    Gonczy Stephen T.

    2015-01-01

    Full Text Available Ceramic matrix composites (CMCs are being designed and developed for engine and exhaust components in commercial aviation, because they offer higher temperature capabilities, weight savings, and improved durability compared to metals. The United States Federal Aviation Administration (FAA issues and enforces regulations and minimum standards covering the safe manufacture, operation, and maintenance of civil aircraft. As new materials, these ceramic composite components will have to meet the certification regulations of the FAA for “airworthiness”. The FAA certification process is defined in the Federal Aviation Regulations (Title 14 of the Code of Federal Regulations, FAA policy statements, orders, advisory circulars, technical standard orders, and FAA airworthiness directives. These regulations and documents provide the fundamental requirements and guidelines for design, testing, manufacture, quality assurance, registration, operation, inspection, maintenance, and repair of aircraft systems and parts. For metallic parts in aircraft, the FAA certification and compliance process is well-established for type and airworthiness certification, using ASTM and SAE standards, the MMPDS data handbook, and FAA advisory circulars. In a similar manner for polymer matrix composites (PMC, the PMC industry and the FAA have jointly developed and are refining parallel guidelines for polymer matrix composites (PMCs, using guidance in FAA circulars and the CMH-17 PMC handbook. These documents discuss design methods and codes, material testing, property data development, life/durability assessment, production processes, QA procedures, inspection methods, operational limits, and repairs for PMCs. For ceramic composites, the FAA and the CMC and aerospace community are working together (primarily through the CMH-17 CMC handbook to define and codify key design, production, and regulatory issues that have to be addressed in the certification of CMC components in

  2. Precision Departure Release Capability (PDRC): NASA to FAA Research Transition

    Science.gov (United States)

    Engelland, Shawn; Davis, Thomas J.

    2013-01-01

    departure runway assignments to the Center scheduling tool. The PDRC concept also incorporates earlier NASA and FAA research into automation-assisted CFR coordination. The PDRC concept reduces uncertainty by automatically communicating coordinated release times with seconds-level precision enabling TMCs and FLMs to work with target times rather than windows. NASA has developed a PDRC prototype system that integrates the Center's TMA system with a research prototype Tower decision support tool. A two-phase field evaluation was conducted at NASA's North Texas Research Station in Dallas-Fort Worth. The field evaluation validated the PDRC concept and demonstrated reduced release time uncertainty while being used for tactical departure scheduling of more than 230 operational flights over 29 weeks of operations.

  3. THE VERTICAL

    Science.gov (United States)

    Albert, Stephen L.; Spencer, Jeffrey B.

    1994-01-01

    'THE VERTICAL' computer keyboard is designed to address critical factors which contribute to Repetitive Motion Injuries (RMI) (including Carpal Tunnel Syndrome) in association with computer keyboard usage. This keyboard splits the standard QWERTY design into two halves and positions each half 90 degrees from the desk. In order to access a computer correctly. 'THE VERTICAL' requires users to position their bodies in optimal alignment with the keyboard. The orthopaedically neutral forearm position (with hands palms-in and thumbs-up) reduces nerve compression in the forearm. The vertically arranged keypad halves ameliorate onset occurrence of keyboard-associated RMI. By utilizing visually-reference mirrored mylar surfaces adjustable to the user's eye, the user is able to readily reference any key indicia (reversed) just as they would on a conventional keyboard. Transverse adjustability substantially reduces cumulative musculoskeletal discomfort in the shoulders. 'THE VERTICAL' eliminates the need for an exterior mouse by offering a convenient finger-accessible curser control while the hands remain in the vertically neutral position. The potential commercial application for 'THE VERTICAL' is enormous since the product can effect every person who uses a computer anywhere in the world. Employers and their insurance carriers are spending hundreds of millions of dollars per year as a result of RMI. This keyboard will reduce the risk.

  4. Vertical Implementation

    NARCIS (Netherlands)

    Rensink, Arend; Gorrieri, Roberto

    2001-01-01

    We investigate criteria to relate specifications and implementations belonging to conceptually different levels of abstraction. For this purpose, we introduce the generic concept of a vertical implementation relation, which is a family of binary relations indexed by a refinement function that maps

  5. A qualitative phenomenological study: Enhanced, risk-based FAA oversight on part 145 maintenance practices

    Science.gov (United States)

    Sheehan, Bryan G.

    The purpose of this qualitative phenomenological study was to examine the phenomenon of enhanced, risk-based Federal Aviation Administration (FAA) oversight of Part 145 repair stations that performed aircraft maintenance for Part 121 air carriers between 2007 and 2014 in Oklahoma. Specifically, this research was utilized to explore what operational changes have occurred in the domestic Part 145 repair station industry such as variations in management or hiring practices, training, recordkeeping and technical data, inventory and aircraft parts supply-chain logistics, equipment, and facilities. After interviewing 12 managers from Part 145 repair stations in Oklahoma, six major theme codes emerged from the data: quality of oversight before 2007, quality of oversight after 2007, advantages of oversight, disadvantages of oversight, status quo of oversight, and process improvement . Of those six major theme codes, 17 subthemes appeared from the data that were used to explain the phenomenon of enhanced oversight in the Part 145 repair station industry. Forty-two percent of the participants indicated a weak FAA oversight system that has hindered the continuous process improvement program in their repair stations. Some of them were financially burdened after hiring additional full-time quality assurance inspectors to specifically manage enhanced FAA oversight. Notwithstanding, the participants of the study indicated that the FAA must apply its surveillance on a more standardized and consistent basis. They want to see this standardization in how FAA inspectors interpret regulations and practice the same quality of oversight for all repair stations, particularly those that are repeat violators and fail to comply with federal aviation regulations. They believed that when the FAA enforces standardization on a consistent basis, repair stations can become more efficient and safer in the performance of their scope of work for the U.S. commercial air transportation industry.

  6. Enhanced FAA-hybrid III numerical dummy model in Madymo for aircraft occupant safety assessment

    NARCIS (Netherlands)

    Boucher, H.; Waagmeester, C.D.

    2003-01-01

    To improve survivability and to minimize the risk of injury to occupants in helicopter crash events, a complete Cabin Safety System concept including safety features and an enhanced FAA-Hybrid III dummy were developed within the HeliSafe project. A numerical tool was also created and validated to al

  7. 47 CFR 17.7 - Antenna structures requiring notification to the FAA.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 1 2010-10-01 2010-10-01 false Antenna structures requiring notification to..., MARKING, AND LIGHTING OF ANTENNA STRUCTURES Federal Aviation Administration Notification Criteria § 17.7 Antenna structures requiring notification to the FAA. A notification to the Federal...

  8. Comparison between EDXRF and FAAS for Zn determination in terrestrial molluscs

    Energy Technology Data Exchange (ETDEWEB)

    Melo, Julyanne T.B.; Cantinha, Rebeca S.; Santos, Mariana L.O.; Santos, Katarine M.B.; Franca, Elvis J., E-mail: julyanne.melo@ufpe.br, E-mail: rebecanuclear@gmail.com, E-mail: marianasantos_ufpe@hotmail.com, E-mail: katarine.mizan@gmail.com, E-mail: ejfranca@cnen.gov.br [Centro Regional de Ciencias Nucleares do Nordeste (CRCN-NE/CNEN-PE), Recife, PE (Brazil); Melo, Ana M.M.A., E-mail: amdemelo@hotmail.com [Universidade Federal de Pernambuco (UFPE), Recife, PE (Brazil). Departamento de Biofisica e Radiobiologia

    2015-07-01

    Even with the most advanced analytical techniques, achieving the true values of a given analyte in a sample cannot be an easy task. Energy Dispersive X-Ray Fluorescence (EDXRF) and Flame Atomic Absorption Spectrometry (FAAS) have been widely used for analysis of the chemical composition of biological matrices in environmental studies. However, depending on the sample matrix, a combination of techniques could be needed for the correct determination of the analyte. Zinc distribution in Littoraria angulifera and Melampus coffea is quite dependent on the environment, so that, diverse methods could be necessary to evaluate the chemical composition of these mollusks. This study aimed at the comparison between EDXRF and FAAS techniques for determining Zn in the soft tissues of terrestrial mollusks. The animals were collected in three mangroves in the State of Pernambuco, Brazil. After shell removal, tissues were lyophilized and milled in a mortar. Test portions of 500 mg were analyzed by EDXRF, followed by chemical treatment for FAAS analysis. For the quality of the analytical procedure, the standard reference material SRM 2976 Mussel Tissue was analyzed together with the samples. The results for the analysis of the certified reference material SRM 2976 indicated the quality of the analytical procedure for both techniques. Adjusted-R{sup 2} between EDXRF and FAAS results was 0.95, indicating a good equivalence of Zn determination by both techniques. However, some improvement of EDXRF determination could be necessary because of the tendency of lower results compared to FAAS, probably related to spectral interferences during the analysis. (author)

  9. Extraction of nickel from edible oils with a complexing agent prior to determination by FAAS.

    Science.gov (United States)

    Tokay, Feyzullah; Bağdat, Sema

    2016-04-15

    In the present work, a new extraction method for separation of nickel from edible oils and determination by FAAS is reported. This method is based on extraction of Ni(II) ions from the oil to aqueous phase with N,N'-bis(4-methoxysalicylidene) ethylenediamine (MSE) and determination by FAAS. Properties of the complex formed between MSE and Ni(II) were investigated spectrophotometrically. Central composite design (CCD) was utilized for optimization of MSE to oil, stirring time and temperature, which were 0.97 mL g(-1), 15.4 min, and 29.7°C, respectively. The developed method was tested with an oil-based metal standard and the recovery was 93.8±3.9%. The proposed method was applied with five different edible oils.

  10. ADSORPTION BEHAVIOUR OF Mn(Ⅱ) AND Zn(Ⅱ) ON ATTAPULGITE WITH FAAS METHOD

    Institute of Scientific and Technical Information of China (English)

    LI Bingbing; LI Chunxiang; LIU Aiqin; XIAO Bo

    2008-01-01

    Active attapulbgite as adsorptive reagent, the adsorptive behavior of Mn(Ⅱ) and Zn(Ⅱ) was studied with Flame atomic absorption spectroscopy (FAAS) method.The mainly factors of influencing the adsorption and desorption of Mn(Ⅱ) and Zn(Ⅱ) were discussed.The interference of coexisting ions was investigated, and the actual sample determination from adzuki beans, mung beans and phosphating waste water was conducted with good result.

  11. ADSORPTION BEHAVIOUR OF Mn(Ⅱ) AND Zn(Ⅱ) ON ATTAPULGITE WITH FAAS METHOD

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Active attapulbgite as adsorptive reagent, the adsorptive behavior of Mn(II) and Zn(II) was studied with Flame atomic absorption spectroscopy (FAAS) method. The mainly factors of influencing the adsorption and desorption of Mn(II) and Zn(II) were discussed. The interference of coexisting ions was investigated, and the actual sample determination from adzuki beans, mung beans and phosphating waste water was conducted with good result.

  12. NextGen Technologies on the FAA's Standard Terminal Automation Replacement System

    Science.gov (United States)

    Witzberger, Kevin; Swenson, Harry; Martin, Lynne; Lin, Melody; Cheng, Jinn-Hwei

    2014-01-01

    This paper describes the integration, evaluation, and results from a high-fidelity human-in-the-loop (HITL) simulation of key NASA Air Traffic Management Technology Demonstration - 1 (ATD- 1) technologies implemented in an enhanced version of the FAA's Standard Terminal Automation Replacement System (STARS) platform. These ATD-1 technologies include: (1) a NASA enhanced version of the FAA's Time-Based Flow Management, (2) a NASA ground-based automation technology known as controller-managed spacing (CMS), and (3) a NASA advanced avionics airborne technology known as flight-deck interval management (FIM). These ATD-1 technologies have been extensively tested in large-scale HITL simulations using general-purpose workstations to study air transportation technologies. These general purpose workstations perform multiple functions and are collectively referred to as the Multi-Aircraft Control System (MACS). Researchers at NASA Ames Research Center and Raytheon collaborated to augment the STARS platform by including CMS and FIM advisory tools to validate the feasibility of integrating these automation enhancements into the current FAA automation infrastructure. NASA Ames acquired three STARS terminal controller workstations, and then integrated the ATD-1 technologies. HITL simulations were conducted to evaluate the ATD-1 technologies when using the STARS platform. These results were compared with the results obtained when the ATD-1 technologies were tested in the MACS environment. Results collected from the numerical data show acceptably minor differences, and, together with the subjective controller questionnaires showing a trend towards preferring STARS, validate the ATD-1/STARS integration.

  13. Vertical sleeve gastrectomy

    Science.gov (United States)

    ... sleeve; Gastrectomy - greater curvature; Gastrectomy - parietal; Gastric reduction; Vertical gastroplasty ... together using surgical staples. This creates a long vertical tube or banana-shaped stomach. The surgery does ...

  14. [Determination of Rh in removal solution of the catalyst from HNBR by FAAS].

    Science.gov (United States)

    Yao, Ming; Zhao, Wei-dong; Wang, Shu-jun; Xu, Rui-qing

    2003-04-01

    The content of Rhodium in extraction solution of the catalyst from HNBR was determined by FAAS. The results showed that this method was simple, rapid, accurate and convenient. Furthermore, this method was used as a means to investigate the optimum process conditions for removing catalyst from HNBR by ligation-extraction technology. When sulfocarbmide was used as a ligation agent and 88% formic acid as an extraction agent, the removal rate of Rh was greater than 98% under the condition of 100 degrees C and two hours of reaction time.

  15. The FAA's postmortem forensic toxicology self-evaluated proficiency test program: the second seven years.

    Science.gov (United States)

    Chaturvedi, Arvind K; Craft, Kristi J; Cardona, Patrick S; Rogers, Paul B; Canfield, Dennis V

    2009-05-01

    During toxicological evaluations of samples from fatally injured pilots involved in civil aviation accidents, a high degree of quality control/quality assurance (QC/QA) is maintained. Under this philosophy, the Federal Aviation Administration (FAA) started a forensic toxicology proficiency-testing (PT) program in July 1991. In continuation of the first seven years of the PT findings reported earlier, PT findings of the next seven years are summarized herein. Twenty-eight survey samples (12 urine, 9 blood, and 7 tissue homogenate) with/without alcohols/volatiles, drugs, and/or putrefactive amine(s) were submitted to an average of 31 laboratories, of which an average of 25 participants returned their results. Analytes in survey samples were correctly identified and quantitated by a large number of participants, but some false positives of concern were reported. It is anticipated that the FAA's PT program will continue to serve the forensic toxicology community through this important part of the QC/QA for laboratory accreditations.

  16. ADSORPTION BEHAVIOR OF Pb(II) ON POTASSIUM HEXATITANATE WHISKER BY FAAS

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Based on the advantage of high surface area and strong adsorption ability of potassium hexatitanate whisker, a method to determine trace Pb(II) content by combining solid phase extraction with Flame atomic absorption spectrometry (FAAS) was established. The adsorptive behavior of potassium hexatitanate whisker to Pb(II), primary influencing factors of adsorption and elution and effect of coexistence ions were investigated systemically. The optimal analytical conditions were discussed and examined. It was found that the adsorption rate of potassium hexatitanate whisker to Pb(II) was 100% at pH 4.0. Pb(II) could be eluted from potassium tetratitanate whisker with HCl (2mol/L) under boiling water for 30min. The detection limit was 5.75ng/mL, and relative standard deviation was 1.66% (n=9, CPb=2.0μg/mL).

  17. Precision Departure Release Capability (PDRC) Overview and Results: NASA to FAA Research Transition

    Science.gov (United States)

    Engelland, Shawn; Davis, Tom.

    2013-01-01

    NASA researchers developed the Precision Departure Release Capability (PDRC) concept to improve the tactical departure scheduling process. The PDRC system is comprised of: 1) a surface automation system that computes ready time predictions and departure runway assignments, 2) an en route scheduling automation tool that uses this information to estimate ascent trajectories to the merge point and computes release times and, 3) an interface that provides two-way communication between the two systems. To minimize technology transfer issues and facilitate its adoption by TMCs and Frontline Managers (FLM), NASA developed the PDRC prototype using the Surface Decision Support System (SDSS) for the Tower surface automation tool, a research version of the FAA TMA (RTMA) for en route automation tool and a digital interface between the two DSTs to facilitate coordination.

  18. ADSORPTION BEHAVIOR OF Pb(Ⅱ) ON POTASSIUM HEXATITANATE WHISKER BY FAAS

    Institute of Scientific and Technical Information of China (English)

    CHENG Yonghua; XU Wanzhen; YAN Yongsheng; JING Junjie

    2008-01-01

    Based on the advantage of high surface area and strong adsorption ability of potassium hexatitanate whisker, a method to determine trace Pb(Ⅱ) content by combining solid phase extraction with Flame atomic absorption spectrometry (FAAS) was established.The adsorptive behavior of potassium hexatitanate whisker to Pb(Ⅱ), primary influencing factors of adsorption and elation and effect of coexistence ions were investigated systemically.The optimal analytical conditions were discussed and examined.It was found that the adsorption rate of potassium hexatitanate whisker to Pb(Ⅱ) was 100% at pH 4.0.Pb(Ⅱ) could be elated from potassium tetratitanate whisker with HCI (2mol/L) under boiling water for 30min.The detection limit was 5.75ng/mL, and relative standard deviation was 1.66% (n=9, CPb=2.0μg/mL).

  19. NASA,FAA,ONERA Swept-Wing Icing and Aerodynamics: Summary of Research and Current Status

    Science.gov (United States)

    Broeren, Andy

    2015-01-01

    NASA, FAA, ONERA, and other partner organizations have embarked on a significant, collaborative research effort to address the technical challenges associated with icing on large scale, three-dimensional swept wings. These are extremely complex phenomena important to the design, certification and safe operation of small and large transport aircraft. There is increasing demand to balance trade-offs in aircraft efficiency, cost and noise that tend to compete directly with allowable performance degradations over an increasing range of icing conditions. Computational fluid dynamics codes have reached a level of maturity that they are being proposed by manufacturers for use in certification of aircraft for flight in icing. However, sufficient high-quality data to evaluate their performance on iced swept wings are not currently available in the public domain and significant knowledge gaps remain.

  20. FAA Air Traffic Control Operations Concepts. Volume 7. ATCT (Airport Traffic Control Towers) Tower Controllers

    Science.gov (United States)

    1989-04-21

    DEVIATION SI’UATION RESORVE DEVIA11ON SITUATION REU IRED ý1.2.4.3 f i f FOCMULATE ADVSORY/ SAFETY GEERATE CLEARANCE ALERT GWENTET T1.3.1.6 PISSUEIH...l BN AIRCRAFT VEHICLEJ L~ Z S CTP1T1.4.2.2 11 .2.4.1___ RECEIVE NOT IC OF S’ECIAL OBERVE A-IRCRAFT! VEHICLE Cct-7ION~c-/ EMERGIEFNY PERCEIVE. PRESE...1RESPF•WIUNGTO 1 RANSIENT M( Z •NIlC4,11(11 FAILURES T1.7.8 . . . RESPO!&IrC TO AIRPORT EQUI, .T FAILURES ] T1".7.9 RESPOV0G "TO HOST FAILURES DOT/FAA/AP

  1. Dissociated Vertical Deviation

    Science.gov (United States)

    ... Frequently Asked Questions Español Condiciones Chinese Conditions Dissociated Vertical Deviation En Español Read in Chinese What is Dissociated Vertical Deviation (DVD)? DVD is a condition in which ...

  2. Vertical bounce of two vertically aligned balls

    Science.gov (United States)

    Cross, Rod

    2007-11-01

    When a tennis ball rests on top of a basketball and both drop to the floor together, the tennis ball is projected vertically at high speed. A mass-spring model of the impact, as well as air track data, suggest that the tennis ball should be projected at relatively low speed. Measurements of the forces on each ball and the bounce of vertically aligned superballs are used to resolve the discrepancy.

  3. 49 CFR 23.45 - What are the requirements for submitting overall goal information to the FAA?

    Science.gov (United States)

    2010-10-01

    ... Transportation PARTICIPATION OF DISADVANTAGED BUSINESS ENTERPRISE IN AIRPORT CONCESSIONS Goals, Good Faith...-conscious means, respectively, and the basis for making this projection (see § 23.51(d)(5)) (g) FAA may approve or disapprove the way you calculated your goal, including your race-neutral/race-conscious “split...

  4. 14 CFR 11.21 - What are the most common kinds of rulemaking actions for which FAA follows the Administrative...

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false What are the most common kinds of rulemaking actions for which FAA follows the Administrative Procedure Act? 11.21 Section 11.21 Aeronautics... RULEMAKING PROCEDURES Rulemaking Procedures General § 11.21 What are the most common kinds of...

  5. 14 CFR 193.17 - How must design and production approval holders handle information they receive from the FAA...

    Science.gov (United States)

    2010-01-01

    ... REGULATIONS PROTECTION OF VOLUNTARILY SUBMITTED INFORMATION § 193.17 How must design and production approval... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false How must design and production approval holders handle information they receive from the FAA under this part? 193.17 Section 193.17...

  6. The Consequences of the FAA not Offering Emergency Agricultural UAS Rules for Water Conservation During the 2012 Drought

    Science.gov (United States)

    Darling, R. G.

    2016-12-01

    The FAA's policies for agricultural Unmanned Aerial Systems (UAS) is essential towards preservation and optimization of water use in the parched Western United States. Had FAA applied emergency rules putting farmers on equal-footing with hobbyists for sUAS use at the beginning of the 2012 drought, the Western US could have been able to save approximately 3 Million/AF of water through improved irrigation management. For perspective, Los Angeles city's annual current consumption is 587,000 acre-feet. This study uses various assumptions about developed water use in agriculture and urban areas to determine water use, energy consumption, monetary loss through delay in FAA regulations. If the saved water was added to the ground the energy savings could have been approximately 1.27 Terra-Watt hours, enough energy to power the entire University of California system for 5 years. It remains unclear if new FAA regulations are sufficiently permissive to allow for widespread adoption of sUAS based precision agriculture. Substantial opportunities exist for utilizing UAS traffic management software in rural areas of less crowed airspace: incorporating geofencing and a notification system to operators and air traffic control as an alternative to a difficult examination process.

  7. 41 CFR 102-37.535 - What information must FAA provide to GSA on its administration of the public airport donation...

    Science.gov (United States)

    2010-07-01

    ... FAA provide to GSA on its administration of the public airport donation program? 102-37.535 Section... (Continued) FEDERAL MANAGEMENT REGULATION PERSONAL PROPERTY 37-DONATION OF SURPLUS PERSONAL PROPERTY Donations to Public Airports § 102-37.535 What information must FAA provide to GSA on its administration...

  8. Vertical axis wind turbines

    Science.gov (United States)

    Krivcov, Vladimir [Miass, RU; Krivospitski, Vladimir [Miass, RU; Maksimov, Vasili [Miass, RU; Halstead, Richard [Rohnert Park, CA; Grahov, Jurij [Miass, RU

    2011-03-08

    A vertical axis wind turbine is described. The wind turbine can include a top ring, a middle ring and a lower ring, wherein a plurality of vertical airfoils are disposed between the rings. For example, three vertical airfoils can be attached between the upper ring and the middle ring. In addition, three more vertical airfoils can be attached between the lower ring and the middle ring. When wind contacts the vertically arranged airfoils the rings begin to spin. By connecting the rings to a center pole which spins an alternator, electricity can be generated from wind.

  9. Signatures of Currency Vertices

    Science.gov (United States)

    Holme, Petter

    2009-03-01

    Many real-world networks have broad degree distributions. For some systems, this means that the functional significance of the vertices is also broadly distributed, in other cases the vertices are equally significant, but in different ways. One example of the latter case is metabolic networks, where the high-degree vertices — the currency metabolites — supply the molecular groups to the low-degree metabolites, and the latter are responsible for the higher-order biological function, of vital importance to the organism. In this paper, we propose a generalization of currency metabolites to currency vertices. We investigate the network structural characteristics of such systems, both in model networks and in some empirical systems. In addition to metabolic networks, we find that a network of music collaborations and a network of e-mail exchange could be described by a division of the vertices into currency vertices and others.

  10. Space, composition, vertical wall ...

    OpenAIRE

    Despot, Katerina; Sandeva, Vaska

    2016-01-01

    The space in which it is an integral segment of our life is nourished with many functional and decorative elements. One aspect for consideration of vertical walls or The vertical gardens and their aesthetic impact in space called function. Vertical gardens bordering the decoration to totally functional garden in areas where there is little oxygen and space, ideal for residential buildings and public spaces where missing greenery, special place occupies in interior design where their expres...

  11. [Determination of eight metal elements in Cichorium glandulosum Boiss et Huet by microwave digestion-FAAS].

    Science.gov (United States)

    Pei, Ling-Peng; Zhou, Xiao-Ying; Cui, Jian; Pang, Zong-Ran; Liu, Hong-Bing; Ge, Liang

    2009-12-01

    The Cichorium glandulosum Boiss et Huet is a traditional Uighur natural herbal medicine, but has not been analyzed and studied in terms of its metal elements. In the experiment, the Cichorium glandulosum Boiss et Huet powder was digested with HNO3 by microwave digestion before determination. The eight metal elements, potassium, nickel, calcium, magnesium, iron, manganese, copper and zinc, in Cichorium glandulosum Boiss et Huet were determined by FAAS. The working conditions, accuracy and precision of the method were studied. The linear correlations of standard curves are good (r = 0.999 1-0.999 9). The recovery (n = 6) is 92.25%-110.5%, and the RSD (n = 6) is 0.7%-3.88%. The results showed that there were comparatively rich metal elements, among which are comparatively high calcium (65.84 mg x g(-1)), iron (24.38 mg x g(-1)), magnesium (278.17 mg x g(-1)) and potassium (18.50 mg x g(-1)), in Cichorium glandulosum Boiss et Huet, and the contents of other elements are nickel of 0.004 38 mg x g(-1), manganese of 0.52 mg x g(-1), copper of 0.016 5 mg x g(-1) and zinc of 0.18 mg x g(-1). This provided useful data for discussing the relationship between the content of the metal elements in Cichorium glandulosum Boiss et Huet and its clinical application in cardiovascular and osteoporosis disease.

  12. Determination of zinc in edible oils by flow injection FAAS after extraction induced by emulsion breaking procedure.

    Science.gov (United States)

    Bakircioglu, Dilek; Topraksever, Nukte; Kurtulus, Yasemin Bakircioglu

    2014-05-15

    A new procedure using extraction induced by emulsion breaking (EIEB) procedure has been developed for extraction/preconcentration of zinc in various edible oils (canola oil, corn oil, hazelnut oil, olive oil, and sunflower oil) prior to its determination by the single line flow injection (FI) flame atomic absorption spectrometry (FAAS). Several parameters affecting the extraction efficiency of the procedure were investigated including the type and concentrations of surfactant, the concentration of HNO3, and the other operational conditions (emulsion breaking time and temperature). The limits of detection of 1.1 and 1.0 μg L(-1) were observed for zinc when aqueous standard and oil-based standards were added to the emulsions for calibration, respectively. The proposed procedure of combining EIEB and single line FI-FAAS can be regarded as a new procedure for the determination of zinc in edible oil samples.

  13. Traumatic vertical atlantoaxial dislocation.

    Science.gov (United States)

    Payer, M; Wetzel, S; Kelekis, A; Jenny, B

    2005-08-01

    We present a case of traumatic vertical atlantoaxial dislocation of 16 millimetres with a fatal outcome. We hypothesize that this extremely rare traumatic vertical atlantoaxial dislocation results from insufficiency of the C1/C2 facet capsules after rupture of the tectorial membrane and the alar ligaments.

  14. Biomimetic FAA-certifiable, artificial muscle structures for commercial aircraft wings

    Science.gov (United States)

    Barrett, Ronald M.; Barrett, Cassandra M.

    2014-07-01

    This paper is centered on a new form of adaptive material which functions much in the same way as skeletal muscle tissue, is structurally modeled on plant actuator cells and capable of rapidly expanding or shrinking by as much as an order of magnitude in prescribed directions. Rapid changes of plant cell shape and sizes are often initiated via ion-transport driven fluid migration and resulting turgor pressure variation. Certain plant cellular structures like those in Mimosa pudica (sensitive plant), Albizia julibrissin (Mimosa tree), or Dionaea muscipula (Venus Flytrap) all exhibit actuation physiology which employs such turgor pressure manipulation. The paper begins with dynamic micrographs of a sectioned basal articulation joint from A. julibrissin. These figures show large cellular dimensional changes as the structure undergoes foliage articulation. By mimicking such structures in aircraft flight control mechanisms, extremely lightweight pneumatic control surface actuators can be designed. This paper shows several fundamental layouts of such surfaces with actuator elements made exclusively from FAA-certifiable materials, summarizes their structural mechanics and shows actuator power and energy densities that are higher than nearly all classes of conventional adaptive materials available today. A sample flap structure is shown to possess the ability to change its shape and structural stiffness as its cell pressures are manipulated, which in turn changes the surface lift-curve slope when exposed to airflows. Because the structural stiffness can be altered, it is also shown that the commanded section lift-curve slope can be similarly controlled between 1.2 and 6.2 rad-1. Several aircraft weight reduction principles are also shown to come into play as the need to concentrate loads to pass through point actuators is eliminated. The paper concludes with a summary of interrelated performance and airframe-level improvements including enhanced gust rejection, load

  15. Composition of vertical gardens

    OpenAIRE

    Sandeva, Vaska; Despot, Katerina

    2013-01-01

    Vertical gardens are fully functional gardens in areas where there is less oxygen and space, ideal for residential and urban cities where there is no vegetation; occupy a special place in interiors furniture. The gardens occupy an important aesthetic problem. Aesthetic task in vertical gardens can be achieved by forming sectors of identification in the urban landscape through the choice of a particular plant spatial composition and composition, to create comfort and representation in commu...

  16. Hybrid vertical cavity laser

    DEFF Research Database (Denmark)

    Chung, Il-Sug; Mørk, Jesper

    2010-01-01

    A new hybrid vertical cavity laser structure for silicon photonics is suggested and numerically investigated. It incorporates a silicon subwavelength grating as a mirror and a lateral output coupler to a silicon ridge waveguide.......A new hybrid vertical cavity laser structure for silicon photonics is suggested and numerically investigated. It incorporates a silicon subwavelength grating as a mirror and a lateral output coupler to a silicon ridge waveguide....

  17. [Duane vertical surgical treatment].

    Science.gov (United States)

    Merino, M L; Gómez de Liaño, P; Merino, P; Franco, G

    2014-04-01

    We report 3 cases with a vertical incomitance in upgaze, narrowing of palpebral fissure, and pseudo-overaction of both inferior oblique muscles. Surgery consisted of an elevation of both lateral rectus muscles with an asymmetrical weakening. A satisfactory result was achieved in 2 cases, whereas a Lambda syndrome appeared in the other case. The surgical technique of upper-insertion with a recession of both lateral rectus muscles improved vertical incomitance in 2 of the 3 patients; however, a residual deviation remains in the majority of cases. Copyright © 2011 Sociedad Española de Oftalmología. Published by Elsevier Espana. All rights reserved.

  18. Vertical Protocol Composition

    DEFF Research Database (Denmark)

    Groß, Thomas; Mödersheim, Sebastian Alexander

    2011-01-01

    The security of key exchange and secure channel protocols, such as TLS, has been studied intensively. However, only few works have considered what happens when the established keys are actually used—to run some protocol securely over the established “channel”. We call this a vertical protocol com...

  19. Vertical cavity laser

    DEFF Research Database (Denmark)

    2016-01-01

    The present invention provides a vertical cavity laser comprising a grating layer comprising an in-plane grating, the grating layer having a first side and having a second side opposite the first side and comprising a contiguous core grating region having a grating structure, wherein an index...

  20. Vertical market participation

    DEFF Research Database (Denmark)

    Schrader, Alexander; Martin, Stephen

    1998-01-01

    Firms that operate at both levels of vertically related Cournot oligopolies will purchase some input supplies from independent rivals, even though they can produce the good at a lower cost, driving up input price for nonintegrated firms at the final good level. Foreclosure, which avoids this stra...... this strategic behavior, yields better market performance than Cournot beliefs...

  1. Vertical orbital dystopia.

    Science.gov (United States)

    Tan, S T; Ashworth, G; Czypionka, S; Poole, M D; Briggs, M

    1996-06-01

    Many pathologic processes may lead to vertical orbital dystopia. We reviewed 47 consecutive cases seen over a 13-year period. Twenty-nine patients underwent eye leveling procedures to improve cosmesis, 2 of these by camouflage procedures and 27 by orbital translocation. Ten patients had 16 secondary operations. There was one death, serious complications occurred in 3 patients, and nuisance complications occurred in 20 others. Seven patients developed diplopia postoperatively, and in 6 patients it was troublesome. In these, it resolved fully in 2 patients, improved to be of no consequence in 2, and in the remaining 2 troublesome symptoms persisted requiring inferior oblique muscle recession in 1. Binocular vision was never restored when not present preoperatively, and in 3 patients temporary loss occurred. There was an overall modest but significant improvement in appearance after surgery. It is concluded that vertical orbital translocation is rewarding and worthwhile.

  2. Combined discrete nebulization and microextraction process for molybdenum determination by flame atomic absorption spectrometry (FAAS); Avaliacao da combinacao da nebulizacao discreta e processos de microextracao aplicados a determinacao de molibdenio por espectrometria de absorcao atomica com chama (FAAS)

    Energy Technology Data Exchange (ETDEWEB)

    Oviedo, Jenny A.; Jesus, Amanda M.D. de; Fialho, Lucimar L.; Pereira-Filho, Edenir R., E-mail: erpf@ufscar.br [Universidade Federal de Sao Carlos (UFSCar), SP (Brazil). Departamento de Quimica

    2014-04-15

    Simple and sensitive procedures for the extraction/preconcentration of molybdenum based on vortex-assisted solidified floating organic drop microextraction (VA-SFODME) and cloud point combined with flame absorption atomic spectrometry (FAAS) and discrete nebulization were developed. The influence of the discrete nebulization on the sensitivity of the molybdenum preconcentration processes was studied. An injection volume of 200 μ resulted in a lower relative standard deviation with both preconcentration procedures. Enrichment factors of 31 and 67 and limits of detection of 25 and 5 μ L{sup -1} were obtained for cloud point and VA-SFODME, respectively. The developed procedures were applied to the determination of Mo in mineral water and multivitamin samples. (author)

  3. Speciation determination of chromium(III) and (VI) using preconcentration cloud point extraction with flame atomic absorption spectrometry (FAAS)

    Energy Technology Data Exchange (ETDEWEB)

    Kiran, K. [Department of Environmental Sciences, S.V. University, Tirupati, 517502 A.P. (India); Kumar, K. Suresh; Prasad, B.; Suvardhan, K. [Department of Chemistry, S. V. University, Tirupati, 517502 A.P. (India); Lekkala, Ramesh Babu [Department of Environmental Sciences, S.V. University, Tirupati, 517502 A.P. (India); Janardhanam, K. [Department of Environmental Sciences, S.V. University, Tirupati, 517502 A.P. (India)], E-mail: Kandukurijanardhanam@gmail.com

    2008-02-11

    bis-[2-Hydroxy-1-naphthaldehyde] thiourea was synthesized and preconcentration cloud point extraction (CPE) for speciation determination of chromium(III) and (VI) in various environmental samples with flame atomic absorption spectrometry (FAAS) has been developed. Chromium(III) complexes with bis-[2-hydroxynaphthaldehyde] thiourea is subsequently entrapped in the surfactant micelles. After complexation of chromium(III) with reagent, the analyte was quantitatively extracted to the surfactant-rich phase in the non-ionic surfactant Triton X-100 after centrifugation. The effect of pH, concentration of chelating agent, surfactant, equilibration temperature and time on CPE was studied. The relative standard deviation was 2.13% and the limits of detection were around 0.18 {mu}g L{sup -1}.

  4. GPS, su datum vertical.

    Directory of Open Access Journals (Sweden)

    Esteban Dörries

    2016-03-01

    Full Text Available La introducción de la metodología GPS en aplicaciones topográficas y geodésicas pone en notoria evidencia la clásica separación de sistemas de referencia en horizontal y vertical. Con GPS el posicionamiento es tridimensional, pero el concepto de altura difiere del clásico. Si se desea utilizar la información altimétrica debe contemplarse la ondulación del geoide.

  5. Evaluation of lubricating oil preparation procedures for the determination of Al, Ba, Mo, Si and V by high-resolution continuum source FAAS.

    Science.gov (United States)

    Amorim Filho, Volnei Resta; Gomes Neto, José Anchieta

    2009-01-01

    Microwave-assisted acid decomposition and oil-in-water emulsification were evaluated as sample pretreatment procedures to determine Al, Ba, Mo, Si and V in lubricating oils by high-resolution continuum source flame atomic absorption spectrometry (HR-CS FAAS). Average recoveries of Al, Ba and V in oil digests (107, 103 and 101%) were close to those obtained for emulsions prepared in kerosene medium (94, 113 and 95%). Average recoveries for Mo were close to 105 and 46% for emulsions and digests, respectively. Improved average recoveries (101%) were obtained for Mo in digests using the analyte addition technique. Silicon was successfully quantified only in digested samples. Limits of quantification for Al, Ba, Mo and V were 1.4, 31.5, 1.5 and 11.4-fold lower than those obtained by line-source FAAS. Enhanced sensitivity, multi-elemental capability, and high sample throughput are among the main advantages of HR-CS FAAS in comparison with the line-source FAAS technique.

  6. A Survey of the Aircraft Maintenance Industry to Solicit Perceptions Regarding the Effectiveness of Recent Graduates of F.A.A. Approved Maintenance Schools.

    Science.gov (United States)

    O'Brian, Benjamin H.

    A study examined the perceptions of employers in the aircraft maintenance industry regarding the effectiveness of recent graduates of Federal Aeronautics Administration (FAA)-approved maintenance schools. Of the 100 employers who were contacted, 68 returned usable surveys. Based on responses, it was concluded that the views of employers in the…

  7. A Survey of the Aircraft Maintenance Industry to Solicit Perceptions Regarding the Effectiveness of Recent Graduates of F.A.A. Approved Maintenance Schools.

    Science.gov (United States)

    O'Brian, Benjamin H.

    A study examined the perceptions of employers in the aircraft maintenance industry regarding the effectiveness of recent graduates of Federal Aeronautics Administration (FAA)-approved maintenance schools. Of the 100 employers who were contacted, 68 returned usable surveys. Based on responses, it was concluded that the views of employers in the…

  8. Determination of Fe Content of Some Food Items by Flame Atomic Absorption Spectroscopy (FAAS): A Guided-Inquiry Learning Experience in Instrumental Analysis Laboratory

    Science.gov (United States)

    Fakayode, Sayo O.; King, Angela G.; Yakubu, Mamudu; Mohammed, Abdul K.; Pollard, David A.

    2012-01-01

    This article presents a guided-inquiry (GI) hands-on determination of Fe in food samples including plantains, spinach, lima beans, oatmeal, Frosted Flakes cereal (generic), tilapia fish, and chicken using flame atomic absorption spectroscopy (FAAS). The utility of the GI experiment, which is part of an instrumental analysis laboratory course,…

  9. Observation of picometer vertical emittance with a vertical undulator.

    Science.gov (United States)

    Wootton, K P; Boland, M J; Dowd, R; Tan, Y-R E; Cowie, B C C; Papaphilippou, Y; Taylor, G N; Rassool, R P

    2012-11-09

    Using a vertical undulator, picometer vertical electron beam emittances have been observed at the Australian Synchrotron storage ring. An APPLE-II type undulator was phased to produce a horizontal magnetic field, which creates a synchrotron radiation field that is very sensitive to the vertical electron beam emittance. The measured ratios of undulator spectral peak heights are evaluated by fitting to simulations of the apparatus. With this apparatus immediately available at most existing electron and positron storage rings, we find this to be an appropriate and novel vertical emittance diagnostic.

  10. Direct Observation of Ultralow Vertical Emittance using a Vertical Undulator

    Energy Technology Data Exchange (ETDEWEB)

    Wootton, Kent

    2015-09-17

    In recent work, the first quantitative measurements of electron beam vertical emittance using a vertical undulator were presented, with particular emphasis given to ultralow vertical emittances [K. P. Wootton, et al., Phys. Rev. ST Accel. Beams, 17, 112802 (2014)]. Using this apparatus, a geometric vertical emittance of 0.9 ± 0.3 pm rad has been observed. A critical analysis is given of measurement approaches that were attempted, with particular emphasis on systematic and statistical uncertainties. The method used is explained, compared to other techniques and the applicability of these results to other scenarios discussed.

  11. Determination of arsenic in liver and kidney of mice exposed in realgar by HG-FAAS%HG-FAAS 法测定雄黄染毒小鼠肝及肾脏中的砷含量

    Institute of Scientific and Technical Information of China (English)

    苑洁; 霍韬光; 王艳蕾; 郭婧潭; 焦雪鑫; 张颖花; 袁媛; 高岚岳; 姜泓

    2015-01-01

    A novel hydride generation‐flame atomic absorption spectrometry (HG‐FAAS ) method was established for the determination of arsenic in liver and kidney of mice after realgar exposure .The results showed that the method was accurate ,sensitive ,reliable and low detec‐tion limit .The distribution levels of arsenic in liver ,kidney of realgar infected mice were fairly with the liver and kidney content .Meanwhile hydride generation conditions were optimized .%建立了氢化物发生‐火焰原子吸收法(HG‐FAAS)测定雄黄染毒小鼠肝及肾脏中砷含量的方法。结果表明,该方法准确、灵敏、可靠、检出限低。雄黄染毒小鼠肝、肾脏中砷的分布水平相当。同时对氢化物发生条件进行了优化。

  12. Coupled resonator vertical cavity laser

    Energy Technology Data Exchange (ETDEWEB)

    Choquette, K.D.; Chow, W.W.; Hou, H.Q.; Geib, K.M.; Hammons, B.E.

    1998-01-01

    The monolithic integration of coupled resonators within a vertical cavity laser opens up new possibilities due to the unique ability to tailor the interaction between the cavities. The authors report the first electrically injected coupled resonator vertical-cavity laser diode and demonstrate novel characteristics arising from the cavity coupling, including methods for external modulation of the laser. A coupled mode theory is used model the output modulation of the coupled resonator vertical cavity laser.

  13. Trade Liberalisation and Vertical Integration

    DEFF Research Database (Denmark)

    Bache, Peter Arendorf; Laugesen, Anders

    -good producers face decisions on exporting, vertical integration of intermediate-input production, and whether the intermediate-input production should be offshored to a low-wage country. We find that the fractions of final-good producers that pursue either vertical integration, offshoring, or exporting are all...... increasing when intermediate-input or final-goods trade is liberalised and when the fixed cost of vertical integration is reduced. At the same time, one observes firms that shift away from either vertical integration, offshoring, or exporting. Further, we provide guidance for testing the open...

  14. Vertical allometry: fact or fiction?

    Science.gov (United States)

    Mahmood, Iftekhar; Boxenbaum, Harold

    2014-04-01

    In pharmacokinetics, vertical allometry is referred to the clearance of a drug when the predicted human clearance is substantially higher than the observed human clearance. Vertical allometry was initially reported for diazepam based on a 33-fold higher human predicted clearance than the observed human clearance. In recent years, it has been found that many other drugs besides diazepam, can be classified as drugs which exhibit vertical allometry. Over the years, many questions regarding vertical allometry have been raised. For example, (1) How to define and identify the vertical allometry? (2) How much difference should be between predicted and observed human clearance values before a drug could be declared 'a drug which follows vertical allometry'? (3) If somehow one can identify vertical allometry from animal data, how this information can be used for reasonably accurate prediction of clearance in humans? This report attempts to answer the aforementioned questions. The concept of vertical allometry at this time remains complex and obscure but with more extensive works one can have better understanding of 'vertical allometry'. Published by Elsevier Inc.

  15. Resting eggs as new biosorbent for preconcentration of trace elements in various samples prior to their determination by FAAS.

    Science.gov (United States)

    Saçmacı, Serife; Yılmaz, Yakup; Kartal, Senol; Kaya, Murat; Duman, Fatih

    2014-06-01

    In this study, the resting eggs of aquatic creatures living in freshwater (Daphnia, Cladocera, Crustacean) ecosystems were used as a novel biosorbent extractant for synchronous preconcentration of trace Cd(II), Co(II), Cu(II), Mn(II), and Ni(II) previous to measurement by flame atomic absorpiton spectrometry (FAAS). Using column procedures, optimization studies were conducted to realize the effective adsorption of the analyte ions such as the solution pH, amount of the biosorbent, volume of the sample, interfering ions, etc. A high preconcentration factor of 67 and low relative standard deflection of ≤4.1% (n=8) were obtained. The invention constrains based on the 3 s/b criterion were 2.4 for Cd(II), 41.4 for Co(II), 4.2 for Cu(II), 3.0 for Mn(II), and 9.6 μg L(-1) for Ni(II). The accuracy of the method was verified by analysis of a certified standard reference material. The used procedure was applied to the definition of the analytes in diverse environmental samples with convincing results. Consequently, the resting eggs of Daphnia can be used as a biosorbent for preconcentration and biosorption studies.

  16. A new synthesis, characterization and application chelating resin for determination of some trace metals in honey samples by FAAS.

    Science.gov (United States)

    Daşbaşı, Teslima; Saçmacı, Şerife; Çankaya, Nevin; Soykan, Cengiz

    2016-07-15

    In this study, we developed a simple and rapid solid phase extraction (SPE) method for the separation/preconcentration and determination of some trace metals by flame atomic absorption spectrometry (FAAS). A new chelating resin, poly [2-(4-methoxyphenylamino)-2-oxoethyl methacrylate-co-divinylbenzene-co-2-acrylamido-2-methyl-1-propanesulfonic acid] (MPAEMA-co-DVB-co-AMPS), was synthesized and characterized. This chelating resin was used as a new adsorbent material for determination of Cd(II), Co(II), Cr(III), Cu(II), Fe(III), Mn(II), Pb(II), and Zn(II) ions. The parameters influential on the determination of this trace metals were examined. Under the optimum conditions, the detection limits (DL) of the method for trace metals were found to be (3s) in the range of 0.9-2.2 μg L(-1) (n=21), the preconcentration factor was calculated as 200 and the relative standard deviation was obtained achieved as ⩽2% for n=11. The method was performed for the determination of trace metals in some honey samples and standard reference materials. Copyright © 2016. Published by Elsevier Ltd.

  17. NASA/FAA/NCAR Supercooled Large Droplet Icing Flight Research: Summary of Winter 1996-1997 Flight Operations

    Science.gov (United States)

    Miller, Dean; Ratvasky, Thomas; Bernstein, Ben; McDonough, Frank; Strapp, J. Walter

    1998-01-01

    During the winter of 1996-1997, a flight research program was conducted at the NASA-Lewis Research Center to study the characteristics of Supercooled Large Droplets (SLD) within the Great Lakes region. This flight program was a joint effort between the National Aeronautics and Space Administration (NASA), the National Center for Atmospheric Research (NCAR), and the Federal Aviation Administration (FAA). Based on weather forecasts and real-time in-flight guidance provided by NCAR, the NASA-Lewis Icing Research Aircraft was flown to locations where conditions were believed to be conducive to the formation of Supercooled Large Droplets aloft. Onboard instrumentation was then used to record meteorological, ice accretion, and aero-performance characteristics encountered during the flight. A total of 29 icing research flights were conducted, during which "conventional" small droplet icing, SLD, and mixed phase conditions were encountered aloft. This paper will describe how flight operations were conducted, provide an operational summary of the flights, present selected experimental results from one typical research flight, and conclude with practical "lessons learned" from this first year of operation.

  18. Determination of some trace metals by FAAS after solid-phase extraction with amberlite XAD-1180/TAN chelating resin.

    Science.gov (United States)

    Yilmaz, Vedat; Kartal, Senol

    2012-01-01

    A new chelating resin was synthesized by immobilizing 1-(2-thiazolylazo)-2-naphthol through the -N=N- group on Amberlite XAD-1180. The resin was used for the preconcentration of Cd(II), Co(II), Cu(II), Mn(II), Ni(II), and Pb(II) ions and their determination by flame atomic absorption spectrometry (FAAS). The influences of some analytical parameters, such as the pH, volume of the sample, flow rates of the sample and eluent, matrix components, amount of the resin, and amount and type of the eluent on the recovery, were investigated. Those metals retained on the resin at pH 8.5 were eluted with 25 mL of 2 mol L(-1) HNO(3). The sorption capacity of the resin was determined, except for Pb(II). The recoveries were found to be ≥95%, and the relative standard-deviation values were ≤4.3%. The detection limits were in the range of 0.1 - 3.6 µg L(-1). For the accuracy of the method, the analysis of a certified reference material was performed. This method was applied to environmental water samples.

  19. The School Library Vertical File.

    Science.gov (United States)

    Smallwood, Carol

    1990-01-01

    Discusses the maintenance of vertical files in the school library. Topics covered include circulation, weeding, using materials for special displays, acquiring materials, policies on advertising and controversial issues, cross-references, subject headings, introducing students to vertical files, beginning a collection, and preservation. (MES)

  20. FAA Air Traffic Control Operations Concepts. Volume 6. ARTCC (Air Route Traffic Control Center)/Host En Route Controllers. Change 1

    Science.gov (United States)

    1988-07-29

    8217 and (MinimumVectorAltitude) ’ MVA ’ and Holding Pattern_Airspace and (ProminentObject) *obstruction* O Task Analysis 0-8 DOT/FAA/AP-87-O1 (VOL #6) CHG 1...0 o A 1. 4 .2 . + DETEC T A P IL O T 02 A IRCRA FT PRO 8 , 17M (E .G . .HV POX IA , × XI X X EXCEPTIN BEACON CODE) 0209 .-~-’... VL’ v Al. 4.2. 8

  1. Further increased production of free fatty acids by overexpressing a predicted transketolase gene of the pentose phosphate pathway in Aspergillus oryzae faaA disruptant.

    Science.gov (United States)

    Tamano, Koichi; Miura, Ai

    2016-09-01

    Free fatty acids are useful as source materials for the production of biodiesel fuel and various chemicals such as pharmaceuticals and dietary supplements. Previously, we attained a 9.2-fold increase in free fatty acid productivity by disrupting a predicted acyl-CoA synthetase gene (faaA, AO090011000642) in Aspergillus oryzae. In this study, we achieved further increase in the productivity by overexpressing a predicted transketolase gene of the pentose phosphate pathway in the faaA disruptant. The A. oryzae genome is predicted to have three transketolase genes and overexpression of AO090023000345, one of the three genes, resulted in phenotypic change and further increase (corresponding to an increased production of 0.38 mmol/g dry cell weight) in free fatty acids at 1.4-fold compared to the faaA disruptant. Additionally, the biomass of hyphae increased at 1.2-fold by the overexpression. As a result, free fatty acid production yield per liter of liquid culture increased at 1.7-fold by the overexpression.

  2. Rapid and simultaneous determination of essential minerals and trace elements in human milk by improved flame atomic absorption spectroscopy (FAAS) with microwave digestion.

    Science.gov (United States)

    Luo, Yang; Zhang, Bo; Chen, Ming; Wang, Jue; Zhang, Xue; Gao, Wei-Yin; Huang, Jun-Fu; Fu, Wei-Ling

    2010-09-08

    A method for the simultaneous and economical determination of many trace elements in human milk is developed. Two multi-element hollow cathode lamps (HCLs) were used instead of single-element HCLs to improve the sample throughput of flame atomic absorption spectroscopy (FAAS). The microwave digestion of milk is optimized prior to detection, and the performance characteristics of the improved analysis method are identified. Clinical samples are detected by both FAAS and inductively coupled plasma-optical emission spectroscopy (ICP-OES) for methodology evaluation. Results reveal that the proposed FAAS with multi-element HCLs could determine six essential minerals and trace elements within 15 min. This method provides a linear analytical range of 0.01-10 mg L(-1). For Ca, Cu, Fe, Mg, Mn, and Zn, the limits of determination are 1.5, 3, 1.8, 2.2, 2.1, and 1.3 microg L(-1), respectively. The mean relative standard deviations (RSDs) of intra- and interassays are lower than 7%. Excellent operational characteristics of rapidity, simplicity, and economy make the proposed method a promising one for the quantification of trace elements in human milk in clinics of underdeveloped areas.

  3. Improvement of copper FAAS determination conditions via preconcentration procedure with the use of salicylaldoxime complex trapped in polymer matrix.

    Science.gov (United States)

    Tobiasz, Anna; Walas, Stanisław; Landowska, Lucyna; Konefał-Góral, Jadwiga

    2012-07-15

    The paper presents application of a new resin dedicated to copper(II) flow-injection on-line preconcentration prior its flame atomic absorption spectrometric (FAAS) determination. The new sorbent, obtained by suspension polymerization technique, was styrene-divinylbenzene copolymer modified with 5-dodecylsalicylaldoxime-copper(II) complex. In flow mode leaching of initially imprinted Cu(II) ions from polymer beads was effective with 1% (v/v) nitric acid, however for elution of ions retained on the sorbent during the loading process sufficient efficiency was obtained for 0.5% (v/v) nitric acid. The most effective copper(II) sorption was observed within sample pH ca. 6.3 at flow rate 7.5mLmin(-1). Furthermore, preconcentration studies of Cu(II) ions realized in the presence of popular foreign ions like Cd(II), Pb(II), Zn(II), Ni(II), Mn(II), Co(II) did not reveal significant interference. The expected effect of Cu(II)-imprinting was confirmed by higher tolerance level for interferents ions concentration for the new sorbent than for the control polymer. It was found that alkaline metals ions and humic acid had the most relevant influence on copper(II) uptake. Accuracy of the evaluated method was assessed for analysis of water samples (tap and mineral water, river water, artesian water) and certified water reference materials compare them to results obtained by inductively plasma mass spectrometry. The satisfactory relative error values obtained with use of standard addition calibration method, confirms the feasibility of this method for Cu(II) determination in water samples. Application of 120s sorption time enabled to obtain 74-fold enrichment factor and limit of detection (3σ) equal to 0.4μgL(-1). Copyright © 2012 Elsevier B.V. All rights reserved.

  4. Vertical Collective Action: Addressing Vertical Asymmetries in Watershed Management

    OpenAIRE

    2015-01-01

    Watersheds and irrigation systems have the characteristic of connecting people vertically by water flows. The location of users along these systems defines their role in the provision and appropriation of water which adds complexity to the potential for cooperation. Verticality thus imposes a challenge to collective action. This paper presents the results of field experiments conducted in four watersheds of Colombia (South America) and Kenya (East Africa) to study the role that location plays...

  5. [Vertical control and orthopedic therapy].

    Science.gov (United States)

    Bardinet, E; Bazert, C; Boileau, M J; Carat, T; Darqué, F; de Brondeau, F; Dorignac, D; Duhart, A M; El Amrani Darqué, K; Pujol, A; Rzadkiewicz, A; Sampeur, M

    2003-09-01

    Control of the vertical development of the face is a key element in assuring the success of orthopedic treatment, as much for its effects on anterior vertical dimension as for its influence on correction of the sagittal discrepancy between the jaws. An effective management of this control demands respect for the equilibrium between posterior and anterior face, as described by Schudy. The authors review the details of the application of orthopedic therapy on the different elements of this equilibrium and then, present the modalities of vertical control appropriate to each appliance.

  6. Future FAA Telecommunications Plan

    Science.gov (United States)

    1991-08-01

    pathway between the communications and processing functions. 13.2.2 Functional/Physical Interface Requirements The WMSCR interfaces are illustrated in...communication requirements to support full internodal redundancy, and physically diverse communications paths providing circuit redundancy. 13.4.1.1.1...interface as a pathway between itself and users who are attached to (1) the NADIN II directly, (2) through the NADIN PSN/Message Switching Network (MSN) or

  7. Complexity and Safety (FAA)

    Science.gov (United States)

    2016-10-27

    subsystems (~stepper motor) • 30 medium-sized subsystems (~wheel brake) • 10 large-sized subsystems (~ hypothetical SAAB -EII 100) Estimate EPC for each kind...16.5 EPC (medium) = 32 • For the large system, used the example in [Peterson 2015]: hypothetical SAAB -EII 100 aircraft; estimated the EPC based

  8. Vertical Beam Polarization at MAMI

    Science.gov (United States)

    Schlimme, B. S.; Achenbach, P.; Aulenbacher, K.; Baunack, S.; Bender, D.; Beričič, J.; Bosnar, D.; Correa, L.; Dehn, M.; Distler, M. O.; Esser, A.; Fonvieille, H.; Friščić, I.; Gutheil, B.; Herrmann, P.; Hoek, M.; Kegel, S.; Kohl, Y.; Kolar, T.; Kreidel, H.-J.; Maas, F.; Merkel, H.; Mihovilovič, M.; Müller, J.; Müller, U.; Nillius, F.; Nuck, A.; Pochodzalla, J.; Schoth, M.; Schulz, F.; Sfienti, C.; Širca, S.; Spruck, B.; Štajner, S.; Thiel, M.; Tioukine, V.; Tyukin, A.; Weber, A.

    2017-04-01

    For the first time a vertically polarized electron beam has been used for physics experiments at MAMI in the energy range between 180 and 855 MeV. The beam-normal single-spin asymmetry An, which is a direct probe of higher-order photon exchange beyond the first Born approximation, has been measured in the reaction 12C (e → , e ‧)12C . Vertical polarization orientation was necessary to measure this asymmetry with the existing experimental setup. In this paper we describe the procedure to orient the electron polarization vector vertically, and the concept of determining both its magnitude and orientation with the available setup. A sophisticated method has been developed to overcome the lack of a polarimeter setup sensitive to the vertical polarization component.

  9. Vertical axis wind turbine airfoil

    Science.gov (United States)

    Krivcov, Vladimir; Krivospitski, Vladimir; Maksimov, Vasili; Halstead, Richard; Grahov, Jurij Vasiljevich

    2012-12-18

    A vertical axis wind turbine airfoil is described. The wind turbine airfoil can include a leading edge, a trailing edge, an upper curved surface, a lower curved surface, and a centerline running between the upper surface and the lower surface and from the leading edge to the trailing edge. The airfoil can be configured so that the distance between the centerline and the upper surface is the same as the distance between the centerline and the lower surface at all points along the length of the airfoil. A plurality of such airfoils can be included in a vertical axis wind turbine. These airfoils can be vertically disposed and can rotate about a vertical axis.

  10. Horizontal and Vertical Line Designs.

    Science.gov (United States)

    Johns, Pat

    2003-01-01

    Presents an art lesson in which students learn about the artist Piet Mondrian and create their own abstract artworks. Focuses on geometric shapes using horizontal and vertical lines. Includes background information about the artist. (CMK)

  11. Verticality Perception During Off-Vertical Axis Rotation

    NARCIS (Netherlands)

    Vingerhoets, R.A.A.; Gisbergen, J.A.M. van; Medendorp, W.P.

    2007-01-01

    During prolonged rotation about a tilted yaw axis, often referred to as off-vertical axis rotation (OVAR), a percept of being translated along a conical path slowly emerges as the sense of rotation subsides. Recently, we found that these perceptual changes are consistent with a canal-otolith interac

  12. Verticality perception during off-vertical axis rotation

    NARCIS (Netherlands)

    Vingerhoets, R.A.A.; Gisbergen, J.A.M. van; Medendorp, W.P.

    2007-01-01

    During prolonged rotation about a tilted yaw axis, often referred to as off-vertical axis rotation (OVAR), a percept of being translated along a conical path slowly emerges as the sense of rotation subsides. Recently, we found that these perceptual changes are consistent with a canal-otolith interac

  13. Alligning vertical collection relevance with user intent

    NARCIS (Netherlands)

    Zhou, Ke; Demeester, Thomas; Nguyen, Dong; Hiemstra, Djoerd; Trieschnigg, Dolf

    2014-01-01

    Selecting and aggregating different types of content from multiple vertical search engines is becoming popular in web search. The user vertical intent, the verticals the user expects to be relevant for a particular information need, might not correspond to the vertical collection relevance, the vert

  14. Alligning Vertical Collection Relevance with User Intent

    NARCIS (Netherlands)

    Zhou, Ke; Demeester, Thomas; Nguyen, Dong-Phuong; Hiemstra, Djoerd; Trieschnigg, Rudolf Berend

    Selecting and aggregating different types of content from multiple vertical search engines is becoming popular in web search. The user vertical intent, the verticals the user expects to be relevant for a particular information need, might not correspond to the vertical collection relevance, the

  15. Spatial Distribution of Vertical Shear

    Science.gov (United States)

    1981-03-01

    Gulf Stream ring. The dotted line is at 150 dbars ... A-31 V’ i LIST OF FIGURES (Continued) Page Figure A.31 As in Figure A.. except for YVETE sta...of mean N(solid lne) and mean S 2 ’(+ marks) for selected YVETE stations. The indvidual points represent non- ?verlap ing 50in vertical a~erages of the

  16. Multiservice Vertical Handoff Decision Algorithms

    Directory of Open Access Journals (Sweden)

    Zhu Fang

    2006-01-01

    Full Text Available Future wireless networks must be able to coordinate services within a diverse-network environment. One of the challenging problems for coordination is vertical handoff, which is the decision for a mobile node to handoff between different types of networks. While traditional handoff is based on received signal strength comparisons, vertical handoff must evaluate additional factors, such as monetary cost, offered services, network conditions, and user preferences. In this paper, several optimizations are proposed for the execution of vertical handoff decision algorithms, with the goal of maximizing the quality of service experienced by each user. First, the concept of policy-based handoffs is discussed. Then, a multiservice vertical handoff decision algorithm (MUSE-VDA and cost function are introduced to judge target networks based on a variety of user- and network-valued metrics. Finally, a performance analysis demonstrates that significant gains in the ability to satisfy user requests for multiple simultaneous services and a more efficient use of resources can be achieved from the MUSE-VDA optimizations.

  17. Autonomous vertical profiler data management

    Digital Repository Service at National Institute of Oceanography (India)

    Afzulpurkar, S.; Navelkar, G.S.; Desa, E.S.; Madhan, R.; Dabholkar, N.; Prabhudesai, S.P.; Mascarenhas, A.A.M.Q.

    The Autonomous Vertical Profiler (AVP), developed at NIO [1] [2], collects position and water column data over a period of 3 days and transmits through a satellite modem which is collated and stored on a PC. Data includes GPS positions, water column...

  18. Vertical integration and market power

    Energy Technology Data Exchange (ETDEWEB)

    Maddigan, R.J.

    1980-01-01

    One of the continuing debates of industrial organization surrounds the importance of market structure in determining a firm's performance. This controversy develops naturally from the difficulties in measuring the relevant variables and the hazards of statistical analysis. The focus of this empirical study is the relationship between vertical integration, as an element of market structure, and market power, as a component of a firm's performance. The model presented in this paper differs from previous efforts because vertical integration is measured by the Vertical Industry Connections (VIC) index. VIC is defined as a function of the relative net interactions among the industries in which a firm operates, and is calculated by use of the national input-output tables. A linear regression model is estimated by means of a random sample of firms selected from the Standard and Poor's COMPUSTAT data base for 1963, 1967, and 1972. Combined cross-sectional, time-series methods are employed. The dependent variable is the price-cost margin; the independent variables include not only VIC, but also the concentration ratio, diversification index, value of assets, capital-output ratio, and sales growth. The results indicate that VIC is significant in increasing the price-cost margin, and thus support the hypothesis that vertical integration is a strategy to enhance market power. 1 figure, 3 tables.

  19. Hybrid Vertical-Cavity Laser

    DEFF Research Database (Denmark)

    2010-01-01

    The present invention provides a light source (2) for light circuits on a silicon platform (3). A vertical laser cavity is formed by a gain region (101) arranged between a top mirror (4) and a bottom grating-mirror (12) in a grating region (11) in a silicon layer (10) on a substrate. A waveguide...

  20. Trade Liberalisation and Vertical Integration

    DEFF Research Database (Denmark)

    Bache, Peter Arendorf; Laugesen, Anders Rosenstand

    We build a three-country model of international trade in final goods and intermediate inputs and study the relation between four different types of trade liberalisation and vertical integration. Firms are heterogeneous with respect to both productivity and factor (headquarter) intensity. Final-go...

  1. Optimization of a cloud point extraction procedure with response surface methodology for the quantification of dissolved iron in produced water from the petroleum industry using FAAS.

    Science.gov (United States)

    Gondim, Tamyris A; Guedes, Jhonyson A C; Ribeiro, Livia P D; Lopes, Gisele S; Matos, Wladiana O

    2017-01-30

    The characterization of inorganic elements in the produced water (PW) samples is a difficult task because of the complexity of the matrix. This work deals with a study of a methodology for dissolved Fe quantification in PW from oil industry by flame atomic absorption spectrometry (FAAS) after cloud point extraction (CPE). The procedure is based on the CPE using PAN as complexing agent and Triton X-114 as surfactant. The best conditions for Fe extraction parameters were studied using a Box-Behnken design. The proposed method presented a LOQ of 0.010μgmL(-1) and LOD of 0.003μgmL(-1). The precision of the method was evaluated in terms of repeatability, obtaining a coefficient of variation of 2.54%. The accuracy of the method was assessed by recovery experiments of Fe spiked that presented recovery of 103.28%. The method was applied with satisfactory performance to determine Fe by FAAS in PW samples.

  2. Vertically Integrated Circuits at Fermilab

    Energy Technology Data Exchange (ETDEWEB)

    Deptuch, Grzegorz; Demarteau, Marcel; Hoff, James; Lipton, Ronald; Shenai, Alpana; Trimpl, Marcel; Yarema, Raymond; Zimmerman, Tom; /Fermilab

    2009-01-01

    The exploration of the vertically integrated circuits, also commonly known as 3D-IC technology, for applications in radiation detection started at Fermilab in 2006. This paper examines the opportunities that vertical integration offers by looking at various 3D designs that have been completed by Fermilab. The emphasis is on opportunities that are presented by through silicon vias (TSV), wafer and circuit thinning and finally fusion bonding techniques to replace conventional bump bonding. Early work by Fermilab has led to an international consortium for the development of 3D-IC circuits for High Energy Physics. The consortium has submitted over 25 different designs for the Fermilab organized MPW run organized for the first time.

  3. INTERNATIONAL SPECIALIZATION AND VERTICAL DIFFERENTIATION

    Directory of Open Access Journals (Sweden)

    Furia Donatella

    2010-07-01

    Full Text Available During the last decades, market segmentation and intra-industry trade have become increasingly relevant. The underlying hypothesis of our work is that distinct articles have heterogeneous potential for vertical differentiation, implying that different patterns of international specialization should be identifiable. We carry out an analysis on revealed comparative advantage (through the Lafay Index in specific sectors of interest. Then we highlight the emergence of diverse degrees of product quality differentiation among sectors (through the Relative Quality Index. Results confirm our hypothesis. Indeed it appears that only certain goods, for which the pace of either creative or technological innovation (or both is particularly fast, present a high degree of vertical differentiation and market segmentation. This allows countries to specialize in a particular product variety and gain market power position for that variety. These findings should be taken in due consideration when designing trade policies.

  4. Kinematic Fitting of Detached Vertices

    Energy Technology Data Exchange (ETDEWEB)

    Mattione, Paul [Rice Univ., Houston, TX (United States)

    2007-05-01

    The eg3 experiment at the Jefferson Lab CLAS detector aims to determine the existence of the $\\Xi_{5}$ pentaquarks and investigate the excited $\\Xi$ states. Specifically, the exotic $\\Xi_{5}^{--}$ pentaquark will be sought by first reconstructing the $\\Xi^{-}$ particle through its weak decays, $\\Xi^{-}\\to\\pi^{-}\\Lambda$ and $\\Lambda\\to\\pi^{-}$. A kinematic fitting routine was developed to reconstruct the detached vertices of these decays, where confidence level cuts on the fits are used to remove background events. Prior to fitting these decays, the exclusive reaction $\\gamma D\\rightarrow pp\\pi^{-}$ was studied in order to correct the track measurements and covariance matrices of the charged particles. The $\\Lambda\\rightarrow p\\pi^{-}$ and $\\Xi^{-}\\to\\pi^{-}\\Lambda$ decays were then investigated to demonstrate that the kinematic fitting routine reconstructs the decaying particles and their detached vertices correctly.

  5. Coexistence of Strategic Vertical Separation and Integration

    DEFF Research Database (Denmark)

    Jansen, Jos

    2003-01-01

    This paper gives conditions under which vertical separation is chosen by some upstream firms, while vertical integration is chosen by others in the equilibrium of a symmetric model. A vertically separating firm trades off fixed contracting costs against the strategic benefit of writing a (two......-part tariff, exclusive dealing) contract with its retailer. Coexistence emerges when more than two vertical Cournot oligopolists supply close substitutes. When vertical integration and separation coexist, welfare could be improved by reducing the number of vertically separating firms. The scope...

  6. Industrial Chain: Industrial Vertical Definition

    Institute of Scientific and Technical Information of China (English)

    YifeiDu; GuojunJiang; ShimingLi

    2004-01-01

    Like value chain and supply chain, “industrial chain” becomes the focus of attention. The implication of “industrial chain” has gained a large range of extension. It not only expresses the industrial “chain” structure and relationship of “back and forward”in order or “up and down” in direction, but also it represents a cluster of large scale of firms in an area or colony. It is a network, or a community. Consequently, we conclude that “industrial chain” is a synthesis of industrial chain, industrial cluster, or industrial network.In this article, firstly we will distinguish industry chain from industry. An industry is the collection of firms that have the same attribute, so an industry can be defined by firm collection of certain attribute. We indicate that industrial chain is a kind of vertical and orderly industrial link. It is defined according to a series of specific product or service created. Secondly we analyze the vertical orderly defiinition process from the aspects of social division of labor and requirement division, self-organization system, and value analysis.Non-symmetry and depending on system or community of large scale of industrial units lead to entire industry to “orderly” structure. On the other hand, the draught of diversity and complexity of requirement simultaneously lead to entire industry to be more “orderly”. Along with processes of self-organization, industrial will appi'oach the state of more orderly and steady, and constantly make industrial chain upgrade. Each firm or unit, who will gain the value, has to establish channels of value, which we called “industrial value chain”. Lastly,we discuss the consequence of vertical and orderly definition, which is exhibited by a certain relationship body. The typical forms of industrial chain include industrial cluster, strategy alliance and vertical integration etc.

  7. Poligonación Vertical

    Directory of Open Access Journals (Sweden)

    Esteban Dörries

    2016-03-01

    Full Text Available La poligonación vertical es un método de medición de diferencias de altura que aprovecha las posibilidades de las estaciones totales. Se presta fundamentalmente para líneas de nivelación entre nodos formando red. El nombre se debe a que las visuales sucesivas se proyectan sobre aristas verticales en lugar de un plano horizontal, como ocurre en la poligonación convencional.

  8. Film boiling on vertical surfaces.

    Science.gov (United States)

    Suryanarayana, N. V.; Merte, H., Jr.

    1972-01-01

    Film boiling of a saturated liquid on a vertical surface is analyzed to determine the local heat-transfer rates as a function of height and heater-surface superheat. Experiments show that the laminar-flow model is inadequate. A turbulent-vapor-flow model is used, and the influence of the interfacial oscillations is incorporated on a semiempirical basis. Measurements of local film boiling were obtained with a transient technique using saturated liquid nitrogen.

  9. Bimanual-vertical hand movements.

    Science.gov (United States)

    Kwon, Jay C; Cohen, Matthew L; Williamson, John; Burtis, Brandon; Heilman, Kenneth M

    2011-07-01

    Patients often demonstrate attentional and action-intentional biases in both the transverse and coronal planes. In addition, when making forelimb movements in the transverse plane, normal participants also have spatial and magnitude asymmetries, but forelimb spatial asymmetries have not been studied in coronal space. Thus, to learn if when normal people make vertical movements they have right-left spatial and magnitude biases, seventeen healthy, blindfolded volunteers had their hands (holding pens) placed vertically in their midsagittal plane, 10 inches apart, on pieces of paper positioned above, below, and at eye-level. Participants were asked to move their hands together vertically and meet in the middle. Participants demonstrated less angular deviation in the below-eye condition than in the other spatial conditions, when moving down than up, and with their right than left hand. Movements toward eye level from upper or lower space were also more accurate than movements in the other directions. Independent of hand, lines were longer with downward than upward movements and the right hand moved more distance than the left. These attentional-intentional asymmetries may be related to gravitational force, hand-hemispheric dominance, and spatial "where" asymmetries; however, the mechanisms accounting for these asymmetries must be ascertained by future research.

  10. [Vertical fractures: apropos of 2 clinical cases].

    Science.gov (United States)

    Félix Mañes Ferrer, J; Micò Muñoz, P; Sánchez Cortés, J L; Paricio Martín, J J; Miñana Laliga, R

    1991-01-01

    The aim of the study is to present a clinical review of the vertical root fractures. Two clinical cases are presented to demonstrates the criteria for obtaining a correct diagnosis of vertical root fractures.

  11. Vertically aligned nanostructure scanning probe microscope tips

    Science.gov (United States)

    Guillorn, Michael A.; Ilic, Bojan; Melechko, Anatoli V.; Merkulov, Vladimir I.; Lowndes, Douglas H.; Simpson, Michael L.

    2006-12-19

    Methods and apparatus are described for cantilever structures that include a vertically aligned nanostructure, especially vertically aligned carbon nanofiber scanning probe microscope tips. An apparatus includes a cantilever structure including a substrate including a cantilever body, that optionally includes a doped layer, and a vertically aligned nanostructure coupled to the cantilever body.

  12. Determinação de metais em óleos lubrificantes, provenientes de motores de ônibus urbano, utilizando a FAAS

    Directory of Open Access Journals (Sweden)

    Eva Lúcia Cardoso Silveira

    2010-01-01

    Full Text Available This work proposed a procedure to examine ashes produced in burning lubricating oils used in public transportation, in Teresina PI. Sulphanilic acid was added to the oil samples, which were burned at 550 °C for three hours and 650 °C for two hours. The ash solutions were analyzed by FAAS and there were significant differences in the metal contents of the waste oil produced from normal car service. The quantification limits in μg g-1 were 5.9 (Fe, 4.4 (Pb, 1.7 (Ni, 2.1 (Cu, and 1.2 (Zn. The results showed positive accuracy and precision with recoveries between 88 and 108%, and RSD lower than 10%.

  13. Comparison of USEPA 3050B and ISO 14869-1: 2001 digestion methods for sediment analysis by using FAAS and ICP-OES quantification techniques

    Directory of Open Access Journals (Sweden)

    Elvira Maria Galí Navarro

    2011-01-01

    Full Text Available A study of the partial USEPA 3050B and total ISO 14869-1:2001 digestion methods of sediments was performed. USEPA 3050B was recommended as the simpler method with less operational risk. However, the extraction ability of the method should be taken in account for the best environmental interpretation of the results. FAAS was used to quantify metal concentrations in sediment solutions. The alternative use of ICP-OES quantification should be conditioned by a previous detailed investigation and eventual correction of the matrix effect. For the first time, the EID method was employed for the detection and correction of the matrix effect in sediment ICP-OES analysis. Finally, some considerations were made about the level of metal contamination in the area under study.

  14. Determination of cadmium in alcohol fuel using Moringa oleifera seeds as a biosorbent in an on-line system coupled to FAAS.

    Science.gov (United States)

    Alves, Vanessa Nunes; Mosquetta, Rafael; Coelho, Nívia Maria Melo; Bianchin, Joyce Nunes; Di Pietro Roux, Kalya Cravo; Martendal, Edmar; Carasek, Eduardo

    2010-01-15

    In this study a new method for determination of cadmium in alcohol fuel using Moringa oleifera seeds as a biosorbent in an on-line preconcentration system coupled to flame atomic absorption spectrometry (FAAS) was developed. Flow and chemical variables of the proposed system were optimized through multivariate designs. The limit of detection for cadmium was 5.50microg L(-1) and the precision was below 2.3% (35.0microg L(-1), n=9). The analytical curve was linear from 5 to 150microg L(-1), with a correlation coefficient of 0.9993. The developed method was successfully applied to spiked alcohol fuel, and accuracy was assessed through recovery tests, with recovery ranging from 97.50 to 100%.

  15. Solvent microextraction-flame atomic absorption spectrometry (SME-FAAS) for determination of ultratrace amounts of cadmium in meat and fish samples.

    Science.gov (United States)

    Goudarzi, Nasser

    2009-02-11

    A simple, low cost and highly sensitive method based on solvent microextraction (SME) for separation/preconcentration and flame atomic absorption spectrometry (FAAS) was proposed for the determination of ultratrace amounts of cadmium in meat and fish samples. The analytical procedure involved the formation of a hydrophobic complex by mixing the analyte solution with an ammonium pyrrolidinedithiocarbamate (APDC) solution. In suitable conditions, the complex of cadmium-APDC entered the micro organic phase, and thus, separation of the analyte from the matrix was achieved. Under optimal chemical and instrumental conditions, a detection limit (3 sigma) of 0.8 ng L(-1) and an enrichment factor of 93 were achieved. The relative standard deviation for the method was found to be 2.2% for Cd. The interference effects of some anions and cations were also investigated. The developed method has been applied to the determination of trace Cd in meat and fish samples.

  16. Simultaneous preconcentration of Co(II), Ni(II), Cu(II), and Cd(II) from environmental samples on Amberlite XAD-2000 column and determination by FAAS

    Energy Technology Data Exchange (ETDEWEB)

    Duran, Celal [Department of Chemistry, Faculty of Arts and Sciences, Karadeniz Technical University, 61080 Trabzon (Turkey)], E-mail: cduran@ktu.edu.tr; Senturk, Hasan Basri [Department of Chemistry, Faculty of Arts and Sciences, Karadeniz Technical University, 61080 Trabzon (Turkey); Elci, Latif [Department of Chemistry, Faculty of Arts and Sciences, Pamukkale University, 20020 Denizli (Turkey); Soylak, Mustafa [Department of Chemistry, Faculty of Arts and Sciences, Erciyes University, 38039 Kayseri (Turkey); Tufekci, Mehmet [Department of Chemistry, Faculty of Arts and Sciences, Karadeniz Technical University, 61080 Trabzon (Turkey)

    2009-02-15

    A new method for the preconcentration of some trace metals (Co, Ni, Cu, and Cd) as complexed with ammonium pyrrolidynedithiocarbamate (APDC) was developed using a mini-column filled with Amberlite XAD-2000 resin. Metal contents were determined by flame atomic absorption spectrometry (FAAS) after the metal complexes accumulated on the resin were eluted with 1 M HNO{sub 3} in acetone. The effects of the analytical parameters such as sample pH, quantity of complexing agent, eluent type, resin quantity, sample volume, sample flow rate, and matrix ions were investigated on the recovery of the metals from aqueous solutions. The relative standard deviation (R.S.D.) of the method was <6%. The validation of the method was confirmed using two certified reference materials (CRM TMDW-500 Drinking Water and CRM SA-C Sandy Soil C). The method was successfully applied to some stream waters and mushroom samples from Eastern Black Sea Region (Trabzon city) of Turkey.

  17. Simultaneous preconcentration of Co(II), Ni(II), Cu(II), and Cd(II) from environmental samples on Amberlite XAD-2000 column and determination by FAAS.

    Science.gov (United States)

    Duran, Celal; Senturk, Hasan Basri; Elci, Latif; Soylak, Mustafa; Tufekci, Mehmet

    2009-02-15

    A new method for the preconcentration of some trace metals (Co, Ni, Cu, and Cd) as complexed with ammonium pyrrolidynedithiocarbamate (APDC) was developed using a mini-column filled with Amberlite XAD-2000 resin. Metal contents were determined by flame atomic absorption spectrometry (FAAS) after the metal complexes accumulated on the resin were eluted with 1M HNO(3) in acetone. The effects of the analytical parameters such as sample pH, quantity of complexing agent, eluent type, resin quantity, sample volume, sample flow rate, and matrix ions were investigated on the recovery of the metals from aqueous solutions. The relative standard deviation (R.S.D.) of the method was <6%. The validation of the method was confirmed using two certified reference materials (CRM TMDW-500 Drinking Water and CRM SA-C Sandy Soil C). The method was successfully applied to some stream waters and mushroom samples from Eastern Black Sea Region (Trabzon city) of Turkey.

  18. Binocular responses and vertical strabismus

    Directory of Open Access Journals (Sweden)

    Risović Dušica

    2007-01-01

    Full Text Available Background/Aim. Elevation in adduction is the most common pattern of vertical strabismus, and it is mostly treated with surgery. The results of weaking of inferior oblique muscle are very changeable. The aim of this study was to evaluate binocular vision using sensory tests before and one and six months after the surgery. Methods. A total of 79 children were divided in two groups: the first, with inferior oblique muscle of overaction (n = 52, and the second with dissociated vertical deviation (DVD, and primary inferior oblique muscle overaction (n = 27. We tested them by polaroid mirror test (PMT, Worth test at distance and near, fusion amplitudes on sinoptofore, Lang I stereo test and Wirt-Titmus stereo test. We examined our patients before and two times after the surgery for vertical strabismus. Results. Foveal suppression in the group I was found in 60.5% of the patients before, and in 56.4% after the surgery. In group II Foveal suppression was detected in 64.7% of the patients before, but in 55.6% 6 months after the surgery with PMT. Worth test revealed suppression in 23.5% of the patients before, and in 40.7% after the vertical muscle surgery. Parafoveal fussion persisted in about 1/3 of the patients before the surgery, and their amplitudes were a little larger after the surgery in the group I patients. Lang I stereo test was negative in 53.9% before and 51.9% after the surgery in the group I, and in 48.2% of the patients before and after the surgery in the group II patients. Wirt-Titmus stereo test was negative in 74.5% of the patients before and in 72.9% after the surgery in the group I, but in the group II it was negative in 70.8% before and in 68.0% of the patients 6 months after the surgery. Conclusion. Binocular responses were found after surgery in 65.7% of the patients the group I and in 55.6% patients the group II. There was no significant difference between these two groups, but binocular responses were more often in the patients

  19. Generation of Vertically Incident Seismograms,

    Science.gov (United States)

    1985-09-01

    p. 106, equation 3.38.) %lPHASE Flag: If set, Minimum- phase filter required; otherwise, Zero phase %ILNR Counter of model file input lines, used in... PHASE ) FILTER -TYPE DB SLOPE CUT-OFF FREQUENCY 1 72 70 2 72 30 4’ 4 GENERATION OF VERTICALLY INCIDENT SEISMOGRAMS VISP; PLOTS OF PARAMETERS TEST I...FILTER PHASE 1 (MINIMUM PHASE ) FILTER -TYPE DB SLOPE CUT-OFF FREQUENCY 1 96 50 2 96 10 Table 6. Input data used to test a high-cult filter with zero phase

  20. BATCH SETTLING IN VERTICAL SETTLERS

    OpenAIRE

    Lama Ramirez, R.; Universidad Nacional Mayor De San Marcos Facultad de Química e Ingeniería Química Departamento de Operaciones Unitarias Av. Venezuela cdra. 34 sin, Lima - Perú; Condorhuamán Ccorimanya, C.; Universidad Nacional Mayor De San Marcos Facultad de Química e Ingeniería Química Departamento de Operaciones Unitarias Av. Venezuela cdra. 34 sin, Lima - Perú

    2014-01-01

    lt has been studied the batch sedimentation of aqueous suspensions of precipitated calcium carbonate, barium sulphate and lead oxide , in vertical thickeners of rectangular and circular cross sectional area. Suspensions vary in concentration between 19.4 and 617.9 g/I and the rate of sedimentation obtained between 0.008 and 7.70 cm/min. The effect of the specific gravity of the solid on the rate of sedimentation is the same for all the suspensions, that is, the greater the value of the specif...

  1. Speciative Determination of Dissolved Inorganic Fe(II, Fe(III and Total Fe in Natural Waters by Coupling Cloud Point Extraction with FAAS

    Directory of Open Access Journals (Sweden)

    Ramazan GÜRKAN

    2013-12-01

    Full Text Available A new cloud point extraction (CPE method for the preconcentration of trace iron speciation in natural waters prior to determination by flame atomic absorption spectrometry (FAAS was developed in the present study. In this method, Fe(II sensitively and selectively reacts with Calcon carboxylic acid (CCA in presence of cetylpyridinium chloride (CPC yielding a hydrophobic complex at pH 10.5, which is then entrapped in surfactant-rich phase. Total Fe was accurately and reliably determined after the reduction of Fe(III to Fe(II with sulfite. The amount of Fe(III in samples was determined from the difference between total Fe and Fe(II. CPC was used not only as an auxiliary ligand in CPE, but also as sensitivity enhancement agent in FAAS. The nonionic surfactant, polyethylene glycol tert-octylphenyl ether (Triton X-114 was used as an extracting agent. The analytical variables affecting CPE efficiency were investigated in detail. The preconcentration/enhancement factors of 50 and 82 respectively, were obtained for the preconcentration of Fe(II with 50 mL solution. Under the optimized conditions, the detection limit of Fe(II in linear range of 0.2-60 μg L-1 was 0.06 μg L-1. The relative standard deviation was 2.7 % (20 μg L-1, N: 5, recoveries for Fe(II were in range of 99.0-102.0% for all water samples including certified reference materials (CRMs. In order to verify its accuracy, two CRMs were analyzed and the results obtained were statistically in good agreement with the certified values.

  2. Convection in a vertical channel

    Energy Technology Data Exchange (ETDEWEB)

    Tisserand, J-C; Creyssels, M; Gibert, M; Castaing, B; Chilla, F, E-mail: Francesca.Chilla@ens-lyon.f [Universite de Lyon, ENS Lyon, UMR 5672 CNRS, 46 Allee d' Italie, 69364 Lyon Cedex 7 (France)

    2010-07-15

    The flow generated by heat convection in a long, vertical channel is studied by means of particle imagery velocimetry techniques, with the help of the thermal measurements from a previous paper (Gibert et al 2009 Phys. Fluids 21 035109). We analyse the mean velocity profiles and the Reynolds stresses, and compare the present results with the previous ones obtained in a larger cell and at a larger Reynolds number. We calculate the horizontal temperature profile and the related horizontal heat flux. The pertinence of effective turbulent diffusivity and viscosity is confirmed by the low value of the associated mixing length. We study the one-point and two-point statistics of both velocity components. We show how the concept of turbulent viscosity explains the relations between the local probability density functions (pdf) of fluctuations for temperature, vertical and horizontal velocity components. Despite the low Reynolds number values explored, some conclusions can be drawn about the small scale velocity differences and the related energy cascade.

  3. Capillary holdup between vertical spheres

    Directory of Open Access Journals (Sweden)

    S. Zeinali Heris

    2009-12-01

    Full Text Available The maximum volume of liquid bridge left between two vertically mounted spherical particles has been theoretically determined and experimentally measured. As the gravitational effect has not been neglected in the theoretical model, the liquid interface profile is nonsymmetrical around the X-axis. Symmetry in the interface profile only occurs when either the particle size ratio or the gravitational force becomes zero. In this paper, some equations are derived as a function of the spheres' sizes, gap width, liquid density, surface tension and body force (gravity/centrifugal to estimate the maximum amount of liquid that can be held between the two solid spheres. Then a comparison is made between the result based on these equations and several experimental results.

  4. Vertical distribution of sediment concentration

    Institute of Scientific and Technical Information of China (English)

    Sai-hua HUANG; Zhi-lin SUN; Dan XU; Shan-shan XIA

    2008-01-01

    A simple formula is proposed to predict the vertical distribution of a suspended load concentration in a 2D steady turbulent flow.The proposed formula significantly improves the well-known Rouse formula where sediment concentration has an infinitely large value at the channel bottom and a zero value at the water surface.Based on this formula and the logarithmic ve-locity profile,a theoretical elementary function for the transport rate of a suspended load is developed.This equation improves the Einstein equation in which the unit-width suspended sediment discharge must be solved by numerical integration and a contra-diction between the lower limit of the integral and that of velocity distribution exists.

  5. 5-foot Vertical Wind Tunnel

    Science.gov (United States)

    1932-01-01

    The researcher is sitting above the exit cone of the 5-foot Vertical Wind Tunnel and is examining the new 6-component spinning balance. This balance was developed between 1930 and 1933. It was an important advance in the technology of rotating or rolling balances. As M.J. Bamber and C.H. Zimmerman wrote in NACA TR 456: 'Data upon the aerodynamic characteristics of a spinning airplane may be obtained in several ways; namely, flight tests with full-scale airplanes, flight tests with balanced models, strip-method analysis of wind-tunnel force and moment tests, and wind-tunnel tests of rotating models.' Further, they note: 'Rolling-balance data have been of limited value because it has not been possible to measure all six force and moment components or to reproduce a true spinning condition. The spinning balance used in this investigation is a 6-component rotating balance from which it is possible to obtain wind-tunnel data for any of a wide range of possible spinning conditions.' Bamber and Zimmerman described the balance as follows: 'The spinning balance consists of a balance head that supports the model and contains the force-measuring units, a horizontal turntable supported by streamline struts in the center of the jet and, outside the tunnel, a direct-current driving motor, a liquid tachometer, an air compressor, a mercury manometer, a pair of indicating lamps, and the necessary controls. The balance head is mounted on the turntable and it may be set to give any radius of spin between 0 and 8 inches.' In an earlier report, NACA TR 387, Carl Wenzinger and Thomas Harris supply this description of the tunnel: 'The vertical open-throat wind tunnel of the National Advisory Committee for Aeronautics ... was built mainly for studying the spinning characteristics of airplane models, but may be used as well for the usual types of wind-tunnel tests. A special spinning balance is being developed to measure the desired forces and moments with the model simulating the actual

  6. [Occlusal vertical dimension in removable complete dentures].

    Science.gov (United States)

    den Haan, R; Witter, D J

    2011-12-01

    In removable complete dentures, the occlusal vertical dimension is an important factor for patients' satisfaction with aesthetics. An excessively reduced occlusal vertical dimension is especially likely to lead to complaints about aesthetics, whereas an increased occlusal vertical dimension may lead to discomfort and a decision not to wear the complete dentures. There are various methods for determining the occlusal vertical dimension in complete dentures, based on the vertical dimension in the rest position of the mandible or on phonetics. However, none of the methods have proven to be clearly superior, in terms of reliability, than the others. The assessment of the occlusal vertical dimension will become more reliable if several methods are used simultaneously. Moreover, knowledge of the characteristics of the ageing face is essential.

  7. Surface tension profiles in vertical soap films

    CERN Document Server

    Adami, N

    2013-01-01

    Surface tension profiles in vertical soap films are experimentally investigated. Measurements are performed introducing deformable elastic objets in the films. The shape adopted by those objects set in the film can be related to the surface tension value at a given vertical position by numerical solving of adapted elasticity equations. We show that the observed dependency of the surface tension versus the vertical position in the soap film can be reproduced by simple modeling taking into account film thickness measurements.

  8. The green building envelope: vertical greening

    OpenAIRE

    Ottelé, M.

    2011-01-01

    Planting on roofs and façades is one of the most innovative and fastest developing fields of green technologies with respect to the built environment and horticulture. This thesis is focused on vertical greening of structures and to the multi-scale benefits of vegetation. Vertical green can improve the environment in urban areas and is becoming a key design consideration in modern building developments. Vertical greening of structures offers large surfaces with vegetation and at the same time...

  9. Microscanner with Vertical out of Plane Combdrive

    OpenAIRE

    Sandner, Thilo; Jung, Denis; Kallweit, David; Grasshoff, T.; Schenk, Harald

    2011-01-01

    This paper reports a new concept of quasi-static micro scanning mirrors enabling large static deflections and linearized scanning using vertical out-of-plane comb drives. The vertical combs are realized from a planar scanner substrate by a functionalized wafer bonding process The new device concept is highly flexible by design; different kinds of vertical combs (e. g. staggered and angular) can be realized without changing the process flow. First demonstrator devices are presented: a) quasi-s...

  10. On the Vertical Gradient in CO2

    Science.gov (United States)

    Stine, A. R.; Fung, I. Y.

    2008-12-01

    Attempts to constrain surface fluxes of carbon from atmospheric measurements of carbon dioxide have primarily focused on surface boundary layer measurements, because information about surface fluxes is least diluted close to the locations where the fluxes occur. However, errors in model ventilation of air in the vertical can be misinterpreted as local surface fluxes. Satellites which measure column integrated CO2 are expected to represent a major advance in part because they observe the entire atmospheric column. Recent work has highlighted the fact that vertical gradients in carbon concentrations can give us information about where vertical mixing errors are likely to be misinterpreted as local surface fluxes, but passive tracer evidence suggests that models that capture vertical profiles on the ocean do poorly on the land (and vice versa), suggesting that the problem of correctly treating vertical mixing in inverse studies is more fundamental than picking the "best" model. We consider observations of the vertical gradient in CO2 from aircrafts and from a comparison of satellites that observe in the near infrared (which observe the column integrated CO2 field) and the thermal infrared (which observe the upper troposphere). We evaluate the feasibility of using these satellites for determining the vertical gradient in CO2. We examine how observations of the vertical gradient of CO2 allow us to differentiate the imprint of vertical mixing and the imprint in surface fluxes on the observed field of atmospheric CO2.

  11. The fundamental formulas for vertices of convex hull

    Directory of Open Access Journals (Sweden)

    Md. Kazi Salimullah

    2013-07-01

    Full Text Available This paper represents four formulas for solution of convex hull problem. It aims to analyze how many points are vertices out of total input points, how many vertices lie on a horizontal or vertical lines, position of vertices and number of vertices on lower and higher lines(horizontal or vertical.

  12. Horizontal versus vertical plate motions

    Directory of Open Access Journals (Sweden)

    M. Cuffaro

    2006-07-01

    Full Text Available We review both present and past motions at major plate boundaries, which have the horizontal component in average 10 to 100 times faster (10–100 mm/yr than the vertical component (0.01–1 mm/yr in all geodynamic settings. The steady faster horizontal velocity of the lithosphere with respect to the upward or downward velocities at plate boundaries supports dominating tangential forces acting on plates. This suggests a passive role of plate boundaries with respect to far field forces determining the velocity of plates. The forces acting on the lithosphere can be subdivided in coupled and uncoupled, as a function of the shear at the lithosphere base. Higher the asthenosphere viscosity, more significant should be the coupled forces, i.e., the mantle drag and the trench suction. Lower the asthenosphere viscosity, more the effects of uncoupled forces might result determinant, i.e., the ridge push, the slab pull and the tidal drag. Although a combination of all forces acting on the lithosphere is likely, the decoupling between lithosphere and mantle suggests that a torque acts on the lithosphere independently of the mantle drag. Slab pull and ridge push are candidates for generating this torque, but, unlike these boundary forces, the advantage of the tidal drag is to be a volume force, acting simultaneously on the whole plates, and being the decoupling at the lithosphere base controlled by lateral variations in viscosity of the low-velocity layer.

  13. Freezing in a vertical tube

    Energy Technology Data Exchange (ETDEWEB)

    Sparrow, E.M.; Broadbent, J.A.

    1983-05-01

    Fundamental heat transfer experiments were performed for freezing of an initially superheated or nonsuperheated liquid in a cooled vertical tube. Measurements were made which yielded information about the freezing front and the frozen mass, about the various energy components extracted from the tube, and about the decay of the initial liquid superheat. Four component energies were identified and evaluated from the experimental data, including the latent energy released by the phase change and sensibly energies released from the subcooled frozen solid and the superheated liquid. Initial superheating of the liquid tended to moderately diminish the frozen mass and latent energy extraction at short freezing times but had little effect on these quantitites at longer times. The extracted sensible energies associated with the superheating more than compensated for the aforementioned decrease in the latent energy. Although the latent energy is the largest contributor to the total extracted energy, the aggregate sensible energies can make a significant contribution, especially at large tube wall subcooling, large initial liquid superheating, and short freezing time. Natural convection effects in the superheated liquid were modest and were confined to short freezing times.

  14. Stability of vertical magnetic chains.

    Science.gov (United States)

    Schönke, Johannes; Fried, Eliot

    2017-02-01

    A linear stability analysis is performed for a pair of coaxial vertical chains made from permanently magnetized balls under the influence of gravity. While one chain rises from the ground, the other hangs from above, with the remaining ends separated by a gap of prescribed length. Various boundary conditions are considered, as are situations in which the magnetic dipole moments in the two chains are parallel or antiparallel. The case of a single chain attached to the ground is also discussed. The stability of the system is examined with respect to three quantities: the number of balls in each chain, the length of the gap between the chains, and a single dimensionless parameter which embodies the competition between magnetic and gravitational forces. Asymptotic scaling laws involving these parameters are provided. The Hessian matrix is computed in exact form, allowing the critical parameter values at which the system loses stability and the respective eigenmodes to be determined up to machine precision. A comparison with simple experiments for a single chain attached to the ground shows good agreement.

  15. Stability of vertical magnetic chains

    Science.gov (United States)

    2017-01-01

    A linear stability analysis is performed for a pair of coaxial vertical chains made from permanently magnetized balls under the influence of gravity. While one chain rises from the ground, the other hangs from above, with the remaining ends separated by a gap of prescribed length. Various boundary conditions are considered, as are situations in which the magnetic dipole moments in the two chains are parallel or antiparallel. The case of a single chain attached to the ground is also discussed. The stability of the system is examined with respect to three quantities: the number of balls in each chain, the length of the gap between the chains, and a single dimensionless parameter which embodies the competition between magnetic and gravitational forces. Asymptotic scaling laws involving these parameters are provided. The Hessian matrix is computed in exact form, allowing the critical parameter values at which the system loses stability and the respective eigenmodes to be determined up to machine precision. A comparison with simple experiments for a single chain attached to the ground shows good agreement. PMID:28293135

  16. Direct Zinc Determination in Brazilian Sugar Cane Spirit by Solid-Phase Extraction Using Moringa oleifera Husks in a Flow System with Detection by FAAS

    Directory of Open Access Journals (Sweden)

    Vanessa N. Alves

    2011-01-01

    Full Text Available This paper reports a method for the determination of zinc in Brazilian sugar cane spirit, (cachaça in Portuguese, using solid-phase extraction with a flow injection analysis system and detection by FAAS. The sorbent material used was activated carbon obtained from Moringa oleifera husks. Flow and chemical variables of the proposed system were optimized through multivariate designs. The factors selected were sorbent mass, sample pH, sample flow rate, and eluent concentration. The optimum extraction conditions were obtained using a sample pH of 4.0, a sample flow rate of 6.0 mL min-1, 30.0 mg of sorbent mass, and 1.0 mol L-1 HNO3 as the eluent at a flow rate of 4.0 mL min-1. The limit of detection for zinc was 1.9 μg L-1, and the precision was below 0.82% (20.0 μg L-1, n=7. The analytical curve was linear from 2 to 50 μg L-1, with a correlation coefficient of 0.9996. The method developed was successfully applied to spiked Brazilian sugar cane spirit, and accuracy was assessed through recovery tests, with results ranging from 83% to 100%.

  17. A Heavy Metal Atmospheric Deposition Study Around the Lead and Copper-Zinc Smelters in Baia Mare, Romania, Employing the Moss Biomonitoring Technique, ENAA and FAAS

    CERN Document Server

    Culicov, O A; Steinnes, E; Okina, O S; Santa, Z; Todoran, R

    2001-01-01

    The mosses Pleurozium schreberi, Pseudoscleropodium purum and Rhytidiadelphus squarrosus were used as biomonitors to study the atmospheric deposition of metals around the lead and copper-zinc smelters in Baia Mare. Samples representing the last three years' growth of moss or its green part, collected on the ground at 28 sites located 2-20 km from the source area, were analyzed by instrumental neutron activation analysis using epithermal neutrons (ENAA) and by flame atomic absorption spectrometry (FAAS). A total of 30 elements were determined, including most of the heavy metals known to be released into the air from this kind of industry. Obtained concentrations for As and Cu are comparable with those observed in Karabash, South Ural Mountains, one of the most polluted regions in Europe. Besides, these two elements correlate very well with each other. The mean values for Zn (136 ppm) and Pb (41 ppm) are substantially higher than those normally found in the literature. The highest value for Pb (175 ppm) was obs...

  18. Solid Phase Extraction of Trace Copper in Aqueous Samples Using C18 Membrane Disks Modified by Benzildithiosemicarbazone Prior to Flame Atomic Absorption Spectrometric (FAAS Determination

    Directory of Open Access Journals (Sweden)

    M. Mohammadhosseini

    2013-08-01

    Full Text Available A highly convenient, selective and sensitive procedure for pre-concentration, separation and determination of sub-ppm levels of Cu2+ in aqueous samples based on modification of octadecyl silica bonded phase membrane (OSBPM disks is described using benzildithiosemicarbazone  (BDSC as a powerful modifier. It was revealed that each loaded OSBPM disk with 6.0 mg of BDSC serves as excellent bead for trapping, enrichment and isolation of trace copper. The analyte was trapped during introduction the aqueous solutions through the surface of each modified membrane, quantitatively, while other interfering ions passed through the disk to drain. The adsorbed Cu2+ ions were then stripped by appropriate eluting agents followed by monitoring of the eluates by FAAS. The effects of sample pH, amount of the modifier, stripping agent types and sample flow-rates were also investigated. The described method permitted a pre-concentration factor of about 200. The detection limit of the procedure was predicted to be about 0.013 ng L-1. The method was successfully employed for recovery and quantification of trace copper in different water samples. 

  19. Cloud point extraction of palladium in water samples and alloy mixtures using new synthesized reagent with flame atomic absorption spectrometry (FAAS)

    Energy Technology Data Exchange (ETDEWEB)

    Priya, B. Krishna [Environmental Monitoring Laboratory, Department of Chemistry, S.V. University, Tirupati 517502, AP (India); Subrahmanayam, P. [Environmental Monitoring Laboratory, Department of Chemistry, S.V. University, Tirupati 517502, AP (India); Suvardhan, K. [Environmental Monitoring Laboratory, Department of Chemistry, S.V. University, Tirupati 517502, AP (India); Kumar, K. Suresh [Environmental Monitoring Laboratory, Department of Chemistry, S.V. University, Tirupati 517502, AP (India); Rekha, D. [Environmental Monitoring Laboratory, Department of Chemistry, S.V. University, Tirupati 517502, AP (India); Rao, A. Venkata [Environmental Monitoring Laboratory, Department of Chemistry, S.V. University, Tirupati 517502, AP (India); Rao, G.C. [Environmental Monitoring Laboratory, Department of Chemistry, S.V. University, Tirupati 517502, AP (India); Chiranjeevi, P. [Environmental Monitoring Laboratory, Department of Chemistry, S.V. University, Tirupati 517502, AP (India)]. E-mail: chiranjeevipattium@gmail.com

    2007-06-01

    The present paper outlines novel, simple and sensitive method for the determination of palladium by flame atomic absorption spectrometry (FAAS) after separation and preconcentration by cloud point extraction (CPE). The cloud point methodology was successfully applied for palladium determination by using new reagent 4-(2-naphthalenyl)thiozol-2yl azo chromotropic acid (NTACA) and hydrophobic ligand Triton X-114 as chelating agent and nonionic surfactant respectively in the water samples and alloys. The following parameters such as pH, concentration of the reagent and Triton X-114, equilibrating temperature and centrifuging time were evaluated and optimized to enhance the sensitivity and extraction efficiency of the proposed method. The preconcentration factor was found to be (50-fold) for 250 ml of water sample. Under optimum condition the detection limit was found as 0.067 ng ml{sup -1} for palladium in various environmental matrices. The present method was applied for the determination of palladium in various water samples, alloys and the result shows good agreement with reported method and the recoveries are in the range of 96.7-99.4%.

  20. Determination of Metal Elements in Diuretic Chinese Herbal Medicine by FAAS%FAAS测定利尿类中药材中的金属元素

    Institute of Scientific and Technical Information of China (English)

    赵子剑; 赵紫梨; 钟锏兴

    2012-01-01

    探讨金属元素与篇蓄、猪苓等中医临床常用的利尿通淋类中药作用的物质基础之间的关系;采用王水对篇蓄、猪苓等利尿类中药进行消解,用火焰原子吸收光谱法(FAAS)测定药材中金属元素的含量.通过金属元素含量与利尿类中药利尿作用强弱的对比研究,探讨中药材的利尿功效与其所含元素含量的关联.7种利尿中药材中含所测定元素的总量依次为:盐车前子、泽泻、猪苓、地肤子、篇蓄、赤小豆、茯苓;利尿类中药的利尿作用可能与其所含的Na、Ca、Mg元素部分相关.

  1. Determination of Iron (Fe and Calcium (Ca in NIST SRM 1566b (Oyster tissue using Flame Atomic Absorption Spectrometry (F-AAS by Standard Addition Method

    Directory of Open Access Journals (Sweden)

    Fitri Dara

    2017-03-01

    Full Text Available NIST Standard Reference Material (SRM 1566b was employed for the determination of Iron (Fe andCalcium (Ca as nutrients in food matrix using Flame Atomic Absorption Spectrometry (F-AAS. Thecertified value of SRM 1566b for Fe and Ca are 205.8 ± 6.8 mg/kg and 0.0838 ± 0.0020 (% or 838 ±20 mg/kg, respectively. This certified values are based on results obtained by single primary method(Isotope Dilution Inductively Couple Plasma Mass Spectrometry at NIST with confirmation by othermethods at National Metrology Institute of P.R. China. This paper proposed a method fordetermination of Fe and Ca in food matrix as recommended by AOAC official with a littlemodification. The method was commenced from the destruction of all organic matter by dry oxidationbefore analysis by standard addition. Under optimum condition, the results of the determination of Feand Ca in SRM 1566b were agreed well with the certificate value. This method would be useful forroutine analysis in food testing laboratories.

  2. FAAS测定电解镉中的Zn、Cu和Fe%Determination of Zinc and Copper and Iron in Electrolysis Cadmium by FAAS

    Institute of Scientific and Technical Information of China (English)

    李文东; 张林; 陈自辉; 王琼; 邹立明; 黄大生

    2009-01-01

    采用火焰原子吸收光谱法测定电解镉中铜、铁和锌的方法,确定了最佳仪器工作条件和样品处理方法.在选择好的实验条件下.测定铜的特征浓度为0.006#g/mL/1%吸收;铁的特征浓度为0.015μg/mL/1%吸收;锌的特征浓度为0.0031μg/mL/1%吸收.回收率分别为铜97.5%-98.0%,铁99.1%-100.2%,锌97.4%-99.1%.%A method for determining zinc,copper and iron in electrolysis cadmium by FAAS was established. Under experimental conditions, characteristic mass are 0.006μg/mL/1% for copper, 0.015μg/mL/1% for iron, 0.003μg/mL/1% for zinc,recovery is 97.5%-98.0% for copper, 99.1%-100.2%for iron,97.4%-99.1% for zinc.

  3. Development of a flotation method for preconcentration-separation of trace amounts of some metal ions in plant tissues prior to their FAAS determinations

    Directory of Open Access Journals (Sweden)

    M. Ghaedi

    2010-01-01

    Full Text Available An efficient flotation method based on the combination of flame atomic absorption spectrometry (FAAS and separation and preconcentration step for determination of Cr3+, Cu 2+, Co2+, Ni2+, Zn2+, Cd 2+, Fe3+ and Pb2+ ions in various real samples by the possibility of applying bis(2-hydroxyacetophenone-1,4-butanediimine (BHABDI as a new collector was studied. The influence of pH, amount of BHABDI as collector, sample matrix, type and amount of eluting agent, type and amount of surfactant as floating agent, ionic strength and air flow rates i.e. variables affecting the efficiency of the extraction system was evaluated. It is ascertained that metal ions such as iron can be separated simultaneously from matrix in the presence of 0.012 mM ligand, 0.025% (w/v of CTAB to a test sample of 750 mL at pH 6.5. These ions can be eluted quantitatively with 6 mL of 1.0 mol L-1 HNO3 in methanol which lead to the enrichment factor of 125. The detection limits for analyte ions were in the range of 1.3-2.4 ng mL-1. The method has been successfully applied for determination of trace amounts of ions in various real samples.

  4. Vertical Files in Midlands Academic Libraries.

    Science.gov (United States)

    Lillis, John G.

    1991-01-01

    Reviews survey responses from 127 nonmedical academic libraries in Nebraska, Iowa, and Kansas regarding their vertical files (e.g., acquisitions, weeding, size, nature, collection management, frequency of use, maintenance of statistics, types of users, circulation, and security), reporting that 109 had vertical files, with most emphasizing topics…

  5. Silicon Micromachined Vertical Structures for Nanoparticle Separation

    NARCIS (Netherlands)

    Shen, C.

    2011-01-01

    In this thesis we described a new approach to design, fabricate, package and test three silicon based porous vertical structures for nanoparticle separations. These vertical structures stand in between two microfluidic channels. In these walls nano channels that connect the two adjacent microchannel

  6. Lidar measured vertical atmospheric scattering profiles

    NARCIS (Netherlands)

    Kunz, G.J.

    1985-01-01

    The vertical structure of the atmosphere, which is of invaluable interest to meteorologists, geo-physicists and environmental researchers, can be measured with LIDAR. A method has been proposed and applied to invert lidar signals from vertical soundings to height resolved scattering coefficients. In

  7. Teaching Students the Verticality of Technical Documentation.

    Science.gov (United States)

    Hager, Peter J.

    1992-01-01

    Advocates making technical writing courses more vertical in structure by including an extensive study of at least one specific form of technical documentation. Examines how students can gain experience in the vertical process by designing, writing, testing, and producing user manuals for on-campus cooperative education clients. Lists the benefits…

  8. The green building envelope: vertical greening

    NARCIS (Netherlands)

    Ottelé, M.

    2011-01-01

    Planting on roofs and façades is one of the most innovative and fastest developing fields of green technologies with respect to the built environment and horticulture. This thesis is focused on vertical greening of structures and to the multi-scale benefits of vegetation. Vertical green can improve

  9. Triangle-intersecting families on eight vertices

    CERN Document Server

    Filmus, Yuval

    2011-01-01

    Simonovits and S\\'{o}s conjectured that the maximal size of a triangle-intersecting family of graphs on $n$ vertices is $2^{\\binom{n}{2}-3}$. Their conjecture has recently been proved using spectral methods. We provide an elementary proof of the special case of $8$ vertices using a partition argument.

  10. Lidar measured vertical atmospheric scattering profiles

    NARCIS (Netherlands)

    Kunz, G.J.

    1985-01-01

    The vertical structure of the atmosphere, which is of invaluable interest to meteorologists, geo-physicists and environmental researchers, can be measured with LIDAR. A method has been proposed and applied to invert lidar signals from vertical soundings to height resolved scattering coefficients. In

  11. Updated Vertical Extent of Collision Damage

    DEFF Research Database (Denmark)

    Tagg, R.; Bartzis, P.; Papanikolaou, P.

    2002-01-01

    The probabilistic distribution of the vertical extent of collision damage is an important and somewhat controversial component of the proposed IMO harmonized damage stability regulations for cargo and passenger ships. The only pre-existing vertical distribution, currently used in the international...

  12. Reliability Analysis of Existing Vertical Wall Breakwaters

    DEFF Research Database (Denmark)

    Burcharth, H. F.; Sørensen, John Dalsgaard

    1998-01-01

    Vertical wall breakwaters are used under quite different conditions where failure of the breakwater or a part of it will have very different consequences. Further a number of existing vertical wall breakwaters have been subjected to significant wave loads which have caused partial failures...

  13. Safety Aspects for Vertical Wall Breakwaters

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Burcharth, H. F.; Christiani, E.

    1996-01-01

    In this appendix some safety aspects in relation to vertical wall breakwaters are discussed. Breakwater structures such as vertical wall breakwaters are used under quite different conditions. The expected lifetime can be from 5 years (interim structure) to 100 years (permanent structure...

  14. Vertical Integration, Monopoly, and the First Amendment.

    Science.gov (United States)

    Brennan, Timothy J.

    This paper addresses the relationship between the First Amendment, monopoly of transmission media, and vertical integration of transmission and content provision. A survey of some of the incentives a profit-maximizing transmission monopolist may have with respect to content is followed by a discussion of how vertical integration affects those…

  15. [Vertical dimension in the Begg technic].

    Science.gov (United States)

    Demange, C; Dion, J G

    1989-01-01

    This data of 25 treated cases in BEGG technic show, with RICKETTS analysis, a small augmentation of vertical dimensions during treatment. During retention, four of five factors improved. No correlation have been found between increase rate of vertical dimensions, treatment duration, and initial typology.

  16. Vertical flight training: An overview of training and flight simulator technology with emphasis on rotary-wing requirements

    Science.gov (United States)

    Alderete, Thomas S.; Ascencio-Lee, Carmen E.; Bray, Richard; Carlton, John; Dohme, Jack; Eshow, Michelle M.; Francis, Stephen; Lee, Owen M.; Lintern, Gavan; Lombardo, David A.

    1994-01-01

    The principal purpose of this publication is to provide a broad overview of the technology that is relevant to the design of aviation training systems and of the techniques applicable to the development, use, and evaluation of those systems. The issues addressed in our 11 chapters are, for the most part, those that would be expected to surface in any informed discussion of the major characterizing elements of aviation training systems. Indeed, many of the same facets of vertical-flight training discussed were recognized and, to some extent, dealt with at the 1991 NASA/FAA Helicopter Simulator Workshop. These generic topics are essential to a sound understanding of training and training systems, and they quite properly form the basis of any attempt to systematize the development and evaluation of more effective, more efficient, more productive, and more economical approaches to aircrew training. Individual chapters address the following topics: an overview of the vertical flight industry: the source of training requirements; training and training schools: meeting current requirements; training systems design and development; transfer of training and cost-effectiveness; the military quest for flight training effectiveness; alternative training systems; training device manufacturing; simulator aero model implementation; simulation validation in the frequency domain; cockpit motion in helicopter simulation; and visual space perception in flight simulators.

  17. Vertical-Cavity Surface-Emitting Lasers

    Science.gov (United States)

    Wilmsen, Carl W.; Temkin, Henryk; Coldren, Larry A.

    2002-01-01

    1. Introduction to VCSELs L. A. Coldren, C. W. Wilmsen and H. Temkin; 2. Fundamental issues in VCSEL design L. A. Coldren and Eric R. Hegblom; 3. Enhancement of spontaneous emission in microcavities E. F. Schubert and N. E. J. Hunt; 4. Epitaxy of vertical-cavity lasers R. P. Schneider Jr and Y. H. Young; 5. Fabrication and performance of vertical-cavity surface-emitting lasers Kent D. Choquette and Kent Geib; 6. Polarization related properties of vertical cavity lasers Dmitri Kuksenkov and Henryk Temkin; 7. Visible light emitting vertical cavity lasers Robert L. Thornton; 8. Long-wavelength vertical-cavity lasers Dubrakovo I. Babic, Joachim Piprek and John E. Bowers; 9. Overview of VCSEL applications Richard C. Williamson; 10. Optical interconnection applications and required characteristics Kenichi Kasahara; 11. VCSEL-based fiber-optic data communications Kenneth Hahn and Kirk Giboney; 12. VCSEL-based smart pixels for free space optoelectronic processing C. W. Wilmsen.

  18. Determinação direta de Ca, Mg, Mn e Zn em amostras de leite de búfala da Ilha de Marajó por espectrometria de absorção atômica com chama (FAAS Direct determination of Ca, Mg, Mn and Zn in buffalo milk of the Marajó Island by FAAS

    Directory of Open Access Journals (Sweden)

    João B. Pereira Junior

    2009-01-01

    Full Text Available This work proposes an analytical procedure for direct determination of calcium, magnesium, manganese and zinc in buffalo milk by flame atomic absorption spectrometry (FAAS. Samples were diluted with a solution containing 10% (v/v of water-soluble tertiary amines (CFA-C at pH 8. For comparison, buffalo milk samples were digested with HNO3 and H2O2. According to a paired t-test, the results obtained in the determination of Ca, Mg, Mn and Zn in digested samples and in 10% (v/v CFA-C medium were in agreement at a 95% confidence level. The developed procedure is simple, rapid, decrease the possibility of contamination and can be applied for the routine determination of Ca, Mg, Mn and Zn in buffalo milk samples without any difficulty caused by matrix constituents, such as fat content, and particle size distribution in the milk emulsion.

  19. A vertically integrated model with vertical dynamics for CO2 storage

    Science.gov (United States)

    Guo, Bo; Bandilla, Karl W.; Doster, Florian; Keilegavlen, Eirik; Celia, Michael A.

    2014-08-01

    Conventional vertically integrated models for CO2 storage usually adopt a vertical equilibrium (VE) assumption, which states that due to strong buoyancy, CO2 and brine segregate quickly, so that the fluids can be assumed to have essentially hydrostatic pressure distributions in the vertical direction. However, the VE assumption is inappropriate when the time scale of fluid segregation is not small relative to the simulation time. By casting the vertically integrated equations into a multiscale framework, a new vertically integrated model can be developed that relaxes the VE assumption, thereby allowing vertical dynamics to be modeled explicitly. The model maintains much of the computational efficiency of vertical integration while allowing a much wider range of problems to be modeled. Numerical tests of the new model, using injection scenarios with typical parameter sets, show excellent behavior of the new approach for homogeneous geologic formations.

  20. VERTICAL VIBRATION ANALYSIS OF AXISYMMETRIC SATURATED SOIL

    Institute of Scientific and Technical Information of China (English)

    CAI Yuan-qiang; XU Chang-jie; ZHENG Zao-feng; WU Da-zhi

    2006-01-01

    Based on Biot's dynamic consolidation equations, by means of Laplace-Hankel transform technology, the integral solutions of stress and displacement in saturated soil with subjacent rock-stratum under axisymmetric arbitrary excitations were derived. Influence of the reflected wave generated by the boundary was revealed. Numerical results indicate that the vibration frequency has some effect on the vertical displacement of saturated soil. The vertical displacement at the surface of saturated soil lags in phase with the load. Furthermore, the dynamic permeability coefficient of saturated soil has significant effect on the vertical displacement at the initial stage of load applied, but when the load becomes stable, the effect is inapparent.

  1. Surface tension profiles in vertical soap films

    Science.gov (United States)

    Adami, N.; Caps, H.

    2015-01-01

    Surface tension profiles in vertical soap films are experimentally investigated. Measurements are performed by introducing deformable elastic objets in the films. The shape adopted by those objects once set in the film is related to the surface tension value at a given vertical position by numerically solving the adapted elasticity equations. We show that the observed dependency of the surface tension versus the vertical position is predicted by simple modeling that takes into account the mechanical equilibrium of the films coupled to previous thickness measurements.

  2. Composite resonator vertical cavity laser diode

    Energy Technology Data Exchange (ETDEWEB)

    Choquette, K.D.; Hou, H.Q.; Chow, W.W.; Geib, K.M.; Hammons, B.E.

    1998-05-01

    The use of two coupled laser cavities has been employed in edge emitting semiconductor lasers for mode suppression and frequency stabilization. The incorporation of coupled resonators within a vertical cavity laser opens up new possibilities due to the unique ability to tailor the interaction between the cavities. Composite resonators can be utilized to control spectral and temporal properties within the laser; previous studies of coupled cavity vertical cavity lasers have employed photopumped structures. The authors report the first composite resonator vertical cavity laser diode consisting of two optical cavities and three monolithic distributed Bragg reflectors. Cavity coupling effects and two techniques for external modulation of the laser are described.

  3. Vertical Nanowire High-Frequency Transistors

    OpenAIRE

    Johansson, Sofia

    2014-01-01

    This thesis explores a novel transistor technology based on vertical InAs nanowires, which could be considered both for low-power high-frequency analog applications and for replacing Si CMOS in the continued scaling of digital electronics. The potential of this device - the vertical InAs nanowire MOSFET – lies in the combination of the outstanding transport properties of InAs and the improved electrostatic control of the gate-all-around geometry. Three generations of the vertical InAs nanowir...

  4. Vertical Nanowire High-Frequency Transistors

    OpenAIRE

    Johansson, Sofia

    2014-01-01

    This thesis explores a novel transistor technology based on vertical InAs nanowires, which could be considered both for low-power high-frequency analog applications and for replacing Si CMOS in the continued scaling of digital electronics. The potential of this device - the vertical InAs nanowire MOSFET – lies in the combination of the outstanding transport properties of InAs and the improved electrostatic control of the gate-all-around geometry. Three generations of the vertical InAs nano...

  5. Automatic on-line pre-concentration system using a knotted reactor for the FAAS determination of lead in drinking water

    Energy Technology Data Exchange (ETDEWEB)

    Souza, Anderson S. [Universidade Federal da Bahia, Instituto de Quimica, Nucleo de Excelencia em Quimica Analitica da Bahia, Campus Universitario de Ondina, Salvador, Bahia 40170-290 (Brazil); Universidade Estadual de Santa Cruz, Ilheus, Bahia (Brazil); Brandao, Geovani C. [Universidade Federal da Bahia, Instituto de Quimica, Nucleo de Excelencia em Quimica Analitica da Bahia, Campus Universitario de Ondina, Salvador, Bahia 40170-290 (Brazil); Santos, Walter N.L. dos [Universidade Estadual de Santa Cruz, Ilheus, Bahia (Brazil); Lemos, Valfredo A. [Universidade Estadual do Sudoeste da Bahia, Campus de Jequie, Jequie, Bahia 45206-190 (Brazil); Ganzarolli, Edgard M. [Universidade Estadual do Centro-Oeste, Departamento de Quimica, Rua Presidente Zacarias, 875, CP 33010, 85010-990 Guarapuava, PR (Brazil); Bruns, Roy E. [Universidade Estadual de Campinas, Instituto de Quimica, CP 6154, 13083-970 Campinas, SP (Brazil); Ferreira, Sergio L.C. [Universidade Federal da Bahia, Instituto de Quimica, Nucleo de Excelencia em Quimica Analitica da Bahia, Campus Universitario de Ondina, Salvador, Bahia 40170-290 (Brazil)]. E-mail: slcf@ufba.br

    2007-03-22

    An automatic on-line pre-concentration system is proposed for lead determination in drinking water using flame atomic absorption spectrometry (FAAS). Lead(II) ions are retained as the 1-(2-pyridylazo)-2-naphthol (PAN) complex in the walls of a knotted reactor, followed by an elution step using 0.50 mol L{sup -1} hydrochloric acid solution. Optimisation involving the sampling flow rate, pH and buffer concentration factors was performed using a Box-Behnken design. Other factors were established considering results of previous experiments. The procedure allows the determination of lead with a 0.43 {mu}g L{sup -1} detection limit (3{sigma}/S) and precisions (expressed as relative standard deviation) of 4.84% (N = 7) and 2.9% (N = 7) for lead concentrations of 5 and 25 {mu}g L{sup -1}, respectively. The accuracy was confirmed by the determination of lead in the NIST SRM 1643d trace elements in natural water standard reference material. The pre-concentration factor obtained is 26.5 and the sampling frequency is 48 h{sup -1}. The recovery achieved for lead determination in the presence of several ions demonstrated that this procedure could be applied to the analysis of drinking water samples. The method was applied for lead determination in drinking water samples collected in Jequie City, Brazil. The lead concentration found in 25 samples were always lower than the permissible maximum levels stipulated by World Health Organization.

  6. 微波消解--FAAS测定佛手中的微量元素%Determination of Microelements in Bergamot by Microwave Digestion-FAAS

    Institute of Scientific and Technical Information of China (English)

    秦书芝; 赵成国; 张瑶; 夏婷; 肖洪彬

    2014-01-01

    目的:测定佛手中锌(Zn)、铜(Cu)、锰(Mn)、铁(Fe)4种微量元素的含量。方法:采用微波消解法处理佛手,利用火焰原子吸收法对佛手中Zn、Cu、Mn、Fe 4种微量元素含量进行测定分析。结果:佛手中Zn、Cu、Mn、Fe含量分别为23.33、4.51、12.13、138.54μg/g。结论:火焰原子吸收光谱法简单、准确,方法加标回收率在98.9%~101.3%,相对标准偏差(RSD)在0.38%~1.06%之间。%Objective:To determine the contents of Zn, Cu, Mn and Fe contained in bergamot. Methods:Berg-amot was dealt by microwave digestion method, the contents of Zn, Cu, Mn and Fe contained in bergamot were de-termined and analyzed by flame atomic absorption method(FAAS). Results:The contents of Zn, Cu, Mn and Fe con-tained in bergamot were 23.33, 4.51, 12.13 and 138.54μg/g respectively. Conclusion:The method is simple and ac-curate, the recovery rate of the method is over the range of 98.9%to 101.3%, and RSD over the range of 0.38%to 1.06%.

  7. GLOBEC NEP Vertical Plankton Tow (VPT) Data

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — GLOBEC (GLOBal Ocean ECosystems Dynamics) NEP (Northeast Pacific) California Current Program Vertical Plankton Tow (VPT) Data For more information, see...

  8. integrated vertical photobioreactor system for carbon dioxide ...

    African Journals Online (AJOL)

    Astri Nugroho

    2013-07-02

    Jul 2, 2013 ... Keywords: vertical photobioreactor, CO2 removal, microalgae, photosynthetic. 1. Introduction. Microalgae have a large biotechnological potential for producing valuable subtances ... vitamins that are utilized to make.

  9. Fast Vertical Mining Using Boolean Algebra

    Directory of Open Access Journals (Sweden)

    Hosny M. Ibrahim

    2015-01-01

    Full Text Available The vertical association rules mining algorithm is an efficient mining method, which makes use of support sets of frequent itemsets to calculate the support of candidate itemsets. It overcomes the disadvantage of scanning database many times like Apriori algorithm. In vertical mining, frequent itemsets can be represented as a set of bit vectors in memory, which enables for fast computation. The sizes of bit vectors for itemsets are the main space expense of the algorithm that restricts its expansibility. Therefore, in this paper, a proposed algorithm that compresses the bit vectors of frequent itemsets will be presented. The new bit vector schema presented here depends on Boolean algebra rules to compute the intersection of two compressed bit vectors without making any costly decompression operation. The experimental results show that the proposed algorithm, Vertical Boolean Mining (VBM algorithm is better than both Apriori algorithm and the classical vertical association rule mining algorithm in the mining time and the memory usage.

  10. Vertically stabilized elongated cross-section tokamak

    Science.gov (United States)

    Sheffield, George V.

    1977-01-01

    This invention provides a vertically stabilized, non-circular (minor) cross-section, toroidal plasma column characterized by an external separatrix. To this end, a specific poloidal coil means is added outside a toroidal plasma column containing an endless plasma current in a tokamak to produce a rectangular cross-section plasma column along the equilibrium axis of the plasma column. By elongating the spacing between the poloidal coil means the plasma cross-section is vertically elongated, while maintaining vertical stability, efficiently to increase the poloidal flux in linear proportion to the plasma cross-section height to achieve a much greater plasma volume than could be achieved with the heretofore known round cross-section plasma columns. Also, vertical stability is enhanced over an elliptical cross-section plasma column, and poloidal magnetic divertors are achieved.

  11. the vertical migration behaviour of estuarine plankton

    African Journals Online (AJOL)

    A series of investigations on the vertical migration behaviour of estuarine zooplankton have been ... This behaviour is particularly well-marked in the plankton of estuaries. Some of the .... time during the night and descended before dawn.

  12. Vertical activity estimation using 2D radar

    CSIR Research Space (South Africa)

    Hakl, H

    2008-12-01

    Full Text Available airspace control response. The method for qualitative vertical activity estimation as presented is characterised by a very fast response time and requires minimal sensor input. The method relies on the interplay of two opposing motion prediction models...

  13. Vertical Land Change, Perry County, Kentucky

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — The vertical land change activity focuses on the detection, analysis, and explanation of topographic change. These detection techniques include both quantitative...

  14. Relevance ranking for vertical search engines

    CERN Document Server

    Chang, Yi

    2014-01-01

    In plain, uncomplicated language, and using detailed examples to explain the key concepts, models, and algorithms in vertical search ranking, Relevance Ranking for Vertical Search Engines teaches readers how to manipulate ranking algorithms to achieve better results in real-world applications. This reference book for professionals covers concepts and theories from the fundamental to the advanced, such as relevance, query intention, location-based relevance ranking, and cross-property ranking. It covers the most recent developments in vertical search ranking applications, such as freshness-based relevance theory for new search applications, location-based relevance theory for local search applications, and cross-property ranking theory for applications involving multiple verticals. It introduces ranking algorithms and teaches readers how to manipulate ranking algorithms for the best results. It covers concepts and theories from the fundamental to the advanced. It discusses the state of the art: development of ...

  15. Thermal vertical bimorph actuators and their applications

    CERN Document Server

    Sehr, H J

    2002-01-01

    In this thesis, a novel concept for lateral actuators based on vertical bimorphs is presented. Vertical bimorphs consist of silicon beams side-coated with aluminium, which bend when heated due to the different thermal expansion coefficients of the two materials causing a displacement in the wafer plane. The heating of the actuator is provided by an electrical current through the silicon beam. The simplest implementation of a vertical bimorph actuator is a clamped-clamped beam. To obtain higher deflections, a meander shaped actuator has been designed. By combining four meander actuators, a two-dimensional positioning stage has been realised. The meander actuator has also been applied for normally closed and normally open micro-relays. Analytical calculations and ANSYS simulations have been carried out to predict the physical behaviour of the bimorph devices, including temperature distribution, static deflection, vertical stiffness, thermal time constant and lateral resonances. For both the clamped-clamped beam...

  16. HL-LHC vertical cryostat during construction

    CERN Multimedia

    Lanaro, Andrea

    2016-01-01

    7m high "Cluster D" vertical test cryostat during construction at contractor's premises, Alca Technology Srl, in Schio, Italy. The inner helium vessel with its heat exchanger are visible. To be installed in the D pit in SMA18.

  17. Attaining High Performance Communications A Vertical Approach

    CERN Document Server

    Gavrilovska, Ada

    2009-01-01

    Technological Advances and Problems of High Performance Communications. An ecosystem of solutions along a stack of technology layers. Cohesively collecting state-of-the-art contributions from leading researchers in industry, national laboratories, and academia, Attaining High Performance Communications: A Vertical Approach discusses various issues pertaining to high performance communications in a particular layer of a vertical stack. It explores efficient interconnection hardware, the architectural aspects of network adapters and their integration with processor cores, the design of scalable

  18. Electrically Pumped Vertical-Cavity Amplifiers

    DEFF Research Database (Denmark)

    Greibe, Tine

    2007-01-01

    In this work, the design of electrically pumped vertical cavity semiconductor optical amplifiers (eVCAs) for use in a mode-locked external-cavity laser has been developed, investigated and analysed. Four different eVCAs, one top-emitting and three bottom emitting structures, have been designed...... and discussed. The thesis concludes with recommendations for further work towards the realisation of compact electrically pumped mode-locked vertical externalcavity surface emitting lasers....

  19. Vertical Integration and Technology: Theory and Evidence

    OpenAIRE

    Daron Acemoglu; Philippe Aghion; Rachel Griffith; Fabrizio Zilibotti

    2004-01-01

    This paper investigates the determinants of vertical integration using data from the UK manufacturing sector. We find that the relationship between a downstream (producer) industry and an upstream (supplier) industry is more likely to be vertically integrated when the producing industry is more technology intensive and the supplying industry is less technology intensive. Moreover, both of these effects are stronger when the supplying industry accounts for a large fraction of the producer's co...

  20. Network coding for efficient vertical handovers.

    OpenAIRE

    Bassoli, Riccardo

    2016-01-01

    In 2008, Institute of Electrical and Electronics Engineers (IEEE) published its standard IEEE 802.21 for media-independent handover services. The main scope of this work was to design a technology agnostic mobility platform to perform vertical handovers between heterogeneous networks. Regarding vertical handover procedures, a key issue to address is the control of packet loss, which is responsible for high handover latency and low communication quality. The solution proposed by the standard I...

  1. FAA Fluorescent Penetrant Laboratory Inspections

    Energy Technology Data Exchange (ETDEWEB)

    WINDES,CONNOR L.; MOORE,DAVID G.

    2000-08-02

    The Federal Aviation Administration Airworthiness Assurance NDI Validation Center currently assesses the capability of various non-destructive inspection (NDI) methods used for analyzing aircraft components. The focus of one such exercise is to evaluate the sensitivity of fluorescent liquid penetrant inspection. A baseline procedure using the water-washable fluorescent penetrant method defines a foundation for comparing the brightness of low cycle fatigue cracks in titanium test panels. The analysis of deviations in the baseline procedure will determine an acceptable range of operation for the steps in the inspection process. The data also gives insight into the depth of each crack and which step(s) of the inspection process most affect penetrant sensitivities. A set of six low cycle fatigue cracks produced in 6.35-mm thick Ti-6Al-4V specimens was used to conduct the experiments to produce sensitivity data. The results will document the consistency of the crack readings and compare previous experiments to find the best parameters for water-washable penetrant.

  2. ALTERNATING HYPERPHORIA - DISSOCIATED VERTICAL DEVIATION (DVD) OCCLUSION HYPERPHORIA

    NARCIS (Netherlands)

    HOUTMAN, WA; ROZE, JH; DEVRIES, B; LETSCH, MC

    1991-01-01

    Alternating hyperphoria (synonyms: dissociated vertical deviation (DVD) or occlusion hyperphoria) and variants like 'unilateral patching hyperphoria' ('periodic vertical squint') and monocular vertical nystagmus, which may arise after strabismus operations or loss of the function of one of the eyes,

  3. Quark mixing renormalization effects in the determination of vertical stroke V{sub tq} vertical stroke

    Energy Technology Data Exchange (ETDEWEB)

    Almasy, Andrea A. [Liverpool Univ. (United Kingdom). Dept. of Mathematical Sciences; Kniehl, Bernd A. [Hamburg Univ. (Germany). II. Inst. fuer Theoretische Physik; Sirlin, Alberto [New York Univ., NY (United States). Dept. of Physics

    2011-01-15

    We study the numerical effects of several renormalization schemes of the Cabibbo-Kobayashi- Maskawa (CKM) quark mixing matrix on the top-quark decay widths. We then employ these results to infer the relative shifts in the CKM parameters vertical stroke V{sub tq} vertical stroke {sup 2} due to the quark mixing renormalization corrections, assuming that they are determined directly from the top-quark partial decay widths, without imposing unitarity constraints. We also discuss the implications of these effects on the ratio R = {gamma}(t {yields} Wb){gamma}{sub t} and the determination of vertical stroke V{sub tb} vertical stroke {sup 2}. (orig.)

  4. Vertical orbital dystopia--surgical correction.

    Science.gov (United States)

    Edgerton, M T; Jane, J A

    1981-02-01

    The surgical correction of vertical malpositions of the human eye has been made relatively safe and reliable by recent surgical techniques. The authors define this condition as vertical orbital dystopia and review the etiology of this deformity in 38 recent consecutive cases that were surgically treated at the Craniofacial Anomalies Center of The University of Virginia. Some new and useful tests are described that are of value to the plastic surgeon in analysis of the facial deformity and in planning the appropriate surgical procedure to correct the vertical dystopia of one or both eyes. Several cases are illustrated that describe the principal surgical methods of moving the eye up or down without loss of vision. The vertical eye shifts in this series have been in the range of 2 to 3 mm to over 22 mm. No loss of vision was produced by these corrections. The most common difficulties and complications of orbital dystopia corrections are described. The implications of this type of surgery in terms of visual physiology are suggested. The authors conclude that surgical correction of vertical orbital dystopias is possible, safe, and rewarding to the patients. However, they advise that the correction is best performed in young children and by a specially trained team of plastic surgeons, neurosurgeons, and ophthalmologists.

  5. Thermal Impacts of Vertical Greenery Systems

    Directory of Open Access Journals (Sweden)

    Safikhani Tabassom

    2014-12-01

    Full Text Available - Using vertical greenery systems to reduce heat transmission is becoming more common in modern architecture. Vertical greenery systems are divided into two main categories; green facades and living walls. This study aims to examine the thermal performance of vertical greenery systems in hot and humid climates. An experimental procedure was used to measure indoor temperature and humidity. These parameters were also measured for the gap between the vertical greenery systems and wall surfaces. Three boxes were used as small-scale rooms. Two boxes were provided with either a living wall or a green facade and one box did not have any greenery (benchmark. Blue Trumpet Vine was used in the vertical greenery systems. The data were recorded over the course of three sunny days in April 2013. An analyses of the results showed that the living wall and green facade reduced indoor temperature up to 4.0 °C and 3.0 °C, respectively. The living wall and green facade also reduced cavity temperatures by 8.0 °C and 6.5 °C, respectively.

  6. Dissociated vertical deviation and eye torsion: Relation to disparity-induced vertical vergence

    NARCIS (Netherlands)

    L.J. van Rijn; H.J. Simonsz (Huib); M.P.M. ten Tusscher

    1997-01-01

    textabstractWe studied the relation between vertical eye movements and binocular torsion in five subjects with dissociated vertical deviation (DVD). During trials, subject viewed a well illuminated Snellen letter chart, with both eyes uncovered during 4 seconds. Subsequently, DVD was induced by

  7. Incorporation of vertical permeability test results in vertical miscible flood design and operation

    Energy Technology Data Exchange (ETDEWEB)

    Gillund, G.N.; Kamal, M.

    1983-01-01

    The original analysis of the Bigoray Nisku B Pool miscible flood indicated potential coning problems related to the level of vertical permeability. This work presents the results of a vertical permeability test which were incorporated into a coning study. Additional reservoir data along with the rate information from the coning study will be used to revise the original reservoir simulation prediction and depletion strategy.

  8. Kinematics of horizontal and vertical caterpillar crawling.

    Science.gov (United States)

    van Griethuijsen, Linnea I; Trimmer, Barry A

    2009-05-01

    Unlike horizontal crawling, vertical crawling involves two counteracting forces: torque rotating the body around its center of mass and gravity resisting forward movement. The influence of these forces on kinematics has been examined in the soft-bodied larval stage of Manduca sexta. We found that crawling and climbing are accomplished using the same movements, with both segment timing and proleg lift indistinguishable in horizontal and vertical locomotion. Minor differences were detected in stride length and in the delay between crawls, which led to a lower crawling speed in the vertical orientation. Although these differences were statistically significant, they were much smaller than the variation in kinematic parameters between animals. The ability of Manduca to crawl and climb using the same movements is best explained by Manduca's relatively small size, slow speed and strong, controlled, passive grip made possible by its proleg/crochets.

  9. Vertical Integration in the Taiwan Aquaculture Industry

    Directory of Open Access Journals (Sweden)

    Tzong-Ru Lee (Jiun-Shen

    2011-12-01

    Full Text Available The study aims to improve the distribution channels in the Taiwanaquaculture industry through a better vertical integration. This studyis derived from a need to improve the distribution performance ofagricultural-based industries in response to increasing food demandsin Asia and elsewhere. Based on a four-by-eight matrix derived fromboth a value chain and a service profit chain, thirty different strategiesare developed. This development is based on key success factors andstrategies for vertical integration interviewed and cited in the literatures.The findings are identified by applying the Gray Relational Analysis(GRA. For this study, the key success factors for aquaculture wholesalemarkets include the communication, integration and cohesion ofopinion within the wholesale market; government support; andmutualtrust between members of the vertical integration scheme. The suitablevertical integration strategies are an improved safety and hygiene inspectionof aquaculture products, accuracy of aquaculture product categorization,and precision in product weighing.

  10. Capacity Planning for Vertical Search Engines

    CERN Document Server

    Badue, Claudine; Almeida, Virgilio; Baeza-Yates, Ricardo; Ribeiro-Neto, Berthier; Ziviani, Artur; Ziviani, Nivio

    2010-01-01

    Vertical search engines focus on specific slices of content, such as the Web of a single country or the document collection of a large corporation. Despite this, like general open web search engines, they are expensive to maintain, expensive to operate, and hard to design. Because of this, predicting the response time of a vertical search engine is usually done empirically through experimentation, requiring a costly setup. An alternative is to develop a model of the search engine for predicting performance. However, this alternative is of interest only if its predictions are accurate. In this paper we propose a methodology for analyzing the performance of vertical search engines. Applying the proposed methodology, we present a capacity planning model based on a queueing network for search engines with a scale typically suitable for the needs of large corporations. The model is simple and yet reasonably accurate and, in contrast to previous work, considers the imbalance in query service times among homogeneous...

  11. Vertical Footbridge Vibrations: The Response Spectrum Methodology

    DEFF Research Database (Denmark)

    Georgakis, Christos; Ingólfsson, Einar Thór

    2008-01-01

    In this paper, a novel, accurate and readily codifiable methodology for the prediction of vertical footbridge response is presented. The methodology is based on the well-established response spectrum approach used in the majority of the world’s current seismic design codes of practice. The concept...... of a universally applicable reference response spectrum is introduced, from which the pedestrian-induced vertical response of any footbridge may be determined, based on a defined “event” and the probability of occurrence of that event. A series of Monte Carlo simulations are undertaken for the development...... period is introduced and its implication on the calculation of footbridge response is discussed. Finally, a brief comparison is made between the theoretically predicted pedestrian-induced vertical response of an 80m long RC footbridge (as an example) and actual field measurements. The comparison shows...

  12. Certified standards and vertical coordination in aquaculture

    DEFF Research Database (Denmark)

    Trifkovic, Neda

    2014-01-01

    This paper explores the interaction between food standards and vertical coordination in the Vietnamese pangasius sector. For farmers and processors alike, the adoption of standards is motivated by a desire to improve market access by ensuring high quality supply. Instead of encouraging the applic......This paper explores the interaction between food standards and vertical coordination in the Vietnamese pangasius sector. For farmers and processors alike, the adoption of standards is motivated by a desire to improve market access by ensuring high quality supply. Instead of encouraging...... the application of standards and contract farming, processing companies prefer to vertically integrate primary production largely due to concerns over the stable supply of pangasius with satisfactory quality and safety attributes. These tendencies increase the market dominance of industrial farming and worsen...

  13. On the vertical structure of wind gusts

    DEFF Research Database (Denmark)

    Suomi, I.; Gryning, Sven-Erik; Floors, Rogier Ralph

    2015-01-01

    The increasing size of wind turbines, their height and the area swept by their blades have revised the need for understanding the vertical structure of wind gusts. Information is needed for the whole profile. In this study, we analyzed turbulence measurements from a 100m high meteorological mast...... and the turbulence intensity, of which the turbulence intensity was found to dominate over the peak factor in determining the effects of stability and height above the surface on the gust factor. The peak factor only explained 15% or less of the vertical decrease of the gust factor, but determined the effect of gust...... duration on the gust factor. The statistical method to estimate the peak factor did not reproduce the observed vertical decrease in near-neutral and stable conditions and near-constant situation in unstable conditions. Despite this inconsistency, the theoretical method provides estimates for the peak...

  14. Plasmonic Properties of Vertically Aligned Nanowire Arrays

    Directory of Open Access Journals (Sweden)

    Hua Qi

    2012-01-01

    Full Text Available Nanowires (NWs/Ag sheath composites were produced to investigate plasmonic coupling between vertically aligned NWs for surface-enhanced Raman scattering (SERS applications. In this investigation, two types of vertical NW arrays were studied; those of ZnO NWs grown on nanosphere lithography patterned sapphire substrate via vapor-liquid-solid (VLS mechanism and Si NW arrays produced by wet chemical etching. Both types of vertical NW arrays were coated with a thin layer of silver by electroless silver plating for SERS enhancement studies. The experimental results show extremely strong SERS signals due to plasmonic coupling between the NWs, which was verified by COMSOL electric field simulations. We also compared the SERS enhancement intensity of aligned and random ZnO NWs, indicating that the aligned NWs show much stronger and repeatable SERS signal than those grown in nonaligned geometries.

  15. Purification process for vertically aligned carbon nanofibers

    Science.gov (United States)

    Nguyen, Cattien V.; Delziet, Lance; Matthews, Kristopher; Chen, Bin; Meyyappan, M.

    2003-01-01

    Individual, free-standing, vertically aligned multiwall carbon nanotubes or nanofibers are ideal for sensor and electrode applications. Our plasma-enhanced chemical vapor deposition techniques for producing free-standing and vertically aligned carbon nanofibers use catalyst particles at the tip of the fiber. Here we present a simple purification process for the removal of iron catalyst particles at the tip of vertically aligned carbon nanofibers derived by plasma-enhanced chemical vapor deposition. The first step involves thermal oxidation in air, at temperatures of 200-400 degrees C, resulting in the physical swelling of the iron particles from the formation of iron oxide. Subsequently, the complete removal of the iron oxide particles is achieved with diluted acid (12% HCl). The purification process appears to be very efficient at removing all of the iron catalyst particles. Electron microscopy images and Raman spectroscopy data indicate that the purification process does not damage the graphitic structure of the nanotubes.

  16. Turbulence in vertical axis wind turbine canopies

    Science.gov (United States)

    Kinzel, Matthias; Araya, Daniel B.; Dabiri, John O.

    2015-11-01

    Experimental results from three different full scale arrays of vertical-axis wind turbines (VAWTs) under natural wind conditions are presented. The wind velocities throughout the turbine arrays are measured using a portable meteorological tower with seven, vertically staggered, three-component ultrasonic anemometers. The power output of each turbine is recorded simultaneously. The comparison between the horizontal and vertical energy transport for the different turbine array sizes shows the importance of vertical transport for large array configurations. Quadrant-hole analysis is employed to gain a better understanding of the vertical energy transport at the top of the VAWT arrays. The results show a striking similarity between the flows in the VAWT arrays and the adjustment region of canopies. Namely, an increase in ejections and sweeps and decrease in inward and outward interactions occur inside the turbine array. Ejections are the strongest contributor, which is in agreement with the literature on evolving and sparse canopy flows. The influence of the turbine array size on the power output of the downstream turbines is examined by comparing a streamwise row of four single turbines with square arrays of nine turbine pairs. The results suggest that a new boundary layer forms on top of the larger turbine arrays as the flow adjusts to the new roughness length. This increases the turbulent energy transport over the whole planform area of the turbine array. By contrast, for the four single turbines, the vertical energy transport due to turbulent fluctuations is only increased in the near wake of the turbines. These findings add to the knowledge of energy transport in turbine arrays and therefore the optimization of the turbine spacing in wind farms.

  17. Integrated asymmetric vertical coupler pressure sensors

    Science.gov (United States)

    Kiyat, Isa; Kocabas, Askin; Akcag, Imran; Aydinli, Atilla

    2004-08-01

    Design and analysis of a novel pressure sensor based on a silicon-on-insulator asymmetric integrated vertical coupler is presented. The coupler is composed of a single mode low index waveguide and a thin silicon slab. Wavelength selective optical modulation of asymmetric vertical coupler is examined in detail. Its potential for sensing applications is highlighted as an integrated optical pressure sensor which can be realized by standard silicon micro-fabrication. Sensitivity of transmission of such couplers on refractive index change of silicon slab ensures that they are good candidates for applications requiring high sensitivities.

  18. Thermal Stratification in Vertical Mantle Tanks

    DEFF Research Database (Denmark)

    Knudsen, Søren; Furbo, Simon

    2001-01-01

    It is well known that it is important to have a high degree of thermal stratification in the hot water storage tank to achieve a high thermal performance of SDHW systems. This study is concentrated on thermal stratification in vertical mantle tanks. Experiments based on typical operation conditions...... are carried out to investigate how the thermal stratification is affected by different placements of the mantle inlet. The heat transfer between the solar collector fluid in the mantle and the domestic water in the inner tank is analysed by CFD-simulations. Furthermore, the flow pattern in the vertical mantle...... tank is investigated....

  19. Geophysical aspects of vertical streamer seismic data

    Energy Technology Data Exchange (ETDEWEB)

    Sognnes, Walter

    1998-12-31

    Vertical cable acquisition is performed by deploying a certain number of vertical hydrophone arrays in the water column, and subsequently shooting a source point on top of it. The advantage of this particular geometry is that gives a data set with all azimuths included. Therefore a more complete 3-D velocity model can be derived. In this paper there are presented some results from the Fuji survey in the Gulf of Mexico. Based on these results, improved geometries and review recommendations for future surveys are discussed. 7 figs.

  20. Breakwaters with Vertical and Inclined Concrete Walls

    DEFF Research Database (Denmark)

    Burcharth, Hans Falk

    Following the PIANC PTC II working group on Analyses of Rubble Mound Breakwaters it was, in 1991, decided to form Working Group (WG) n° 28 on "Breakwaters with vertical and inclined concrete walls" The scope of the work was to achieve a better understanding of the overall safety aspects in the de......Following the PIANC PTC II working group on Analyses of Rubble Mound Breakwaters it was, in 1991, decided to form Working Group (WG) n° 28 on "Breakwaters with vertical and inclined concrete walls" The scope of the work was to achieve a better understanding of the overall safety aspects...

  1. Tissue Engineering for Vertical Ridge Reconstruction.

    Science.gov (United States)

    Patel, Neel; Kim, Beomjune; Zaid, Waleed; Spagnoli, Daniel

    2017-02-01

    This article provides an overview of basic tissue engineering principles as they are applied to vertical ridge defects and reconstructive techniques for these types of deficiencies. Presented are multiple clinical cases ranging from office-based dentoalveolar procedures to the more complex reconstruction of postresection mandibular defects. Several different types of regenerative tissue constructs are presented; either used alone or in combination with traditional reconstructive techniques and procedures, such as maxillary sinus augmentation, Le Fort I osteotomy, and microvascular free tissue transfer. The goal is to also familiarize the reconstructive surgeon to potential future strategies in vertical alveolar ridge augmentation. Copyright © 2016 Elsevier Inc. All rights reserved.

  2. Vertical Vergence Adaptation Produces an Objective Vertical Deviation That Changes With Head Tilt

    Science.gov (United States)

    Irsch, Kristina; Guyton, David L.; Ramey, Nicholas A.; Adyanthaya, Rohit S.; Ying, Howard S.

    2013-01-01

    Purpose. To document the cyclovertical ocular motor mechanism used for vertical fusion in healthy subjects, and to explore whether vertical vergence training in healthy individuals can produce objectively confirmed vertical deviations that change with head tilt, revealing a basic mechanism that can produce a pattern of misalignment in an otherwise normal ocular motor system that is similar to superior oblique muscle paresis (SOP). Methods. Seven subjects with normal orthoptic examinations were adapted to vertical image disparities using our tilting haploscopic eye-tracking apparatus presenting concentric circle targets without torsional cues. Static eye positions were recorded with head straight and when tilted 45 degrees to the left and right, during both binocular and monocular viewing. Results. Vertical fusional vergence was accompanied by a cycloversion, with the downward-moving eye intorting and the upward-moving eye extorting, implicating primary involvement of the oblique extraocular muscles. After adaptation to the slowly increasing vertical target separation, all subjects developed a temporary vertical deviation in the straight ahead position that increased with head tilt to one side and decreased with head tilt to the other side. Conclusions. These results not only show that head-tilt–dependent changes in vertical deviation are not necessarily pathognomonic for SOP, but also, and more importantly, suggest mechanisms that can mimic SOP and suggest a possible role for vertical vergence training in reducing deviations and thus the amount of head tilt required for fusion. Ultimately, vertical vergence training may provide an adjunct or alternative to extraocular muscle surgery in selected cases. PMID:23572100

  3. 33 CFR 118.85 - Lights on vertical lift bridges.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Lights on vertical lift bridges... BRIDGES BRIDGE LIGHTING AND OTHER SIGNALS § 118.85 Lights on vertical lift bridges. (a) Lift span lights. The vertical lift span of every vertical lift bridge shall be lighted so that the center of the...

  4. Avaliação da composição mineral do chá da folha senescente de Montrichardia linifera (arruda schott (araceae por espectrometria de absorção atômica com chama (FAAS

    Directory of Open Access Journals (Sweden)

    Cristine Bastos do Amarante

    2011-01-01

    Full Text Available Levels of Ca, Mg, Fe, Zn, Cu and Mn were determinated by FAAS in the tea and dry matter from senescent leaf from Montrichardia linifera, plant used in folk medicine Amazon. The content of these metals that are transferred of the leaf to the infusions have presented significant reductions, however, the Mn values in the infusion may exceed the tolerable daily intake (11 mg if consumption of this tea is greater than 1.0 L per day. So the tea of senescent leaves of M. linifera may be considered as a toxic beverage and thus its use is not advised.

  5. Potential for the speciation of Zn using fast protein liquid chromatography (FPLC) and convective interaction media (CIM) fast monolithic chromatography with FAAS and electrospray (ES)-MS-MS detection.

    Science.gov (United States)

    Svete, P; Milacic, R; Mitrovic, B; Pihlar, B

    2001-08-01

    Analytical procedures were developed for the speciation of Zn using fast protein liquid chromatography (FPLC), flame atomic absorption spectrometry (FAAS) and convective interaction media (CIM) fast monolithic chromatography with FAAS and electrospray (ES)-MS-MS detection. The investigation was performed on synthetic solutions (2 microg cm-3 Zn) of hydrated Zn2+ species and Zn complexes with citrate, oxalate and EDTA (ligand-to-Zn molar ratio 100:1) over a pH range from 5.4 to 7.4. It was found that Zn interacts with various buffers and the careful adjustment of the pH with diluted solutions of KOH is, therefore, required. FPLC separations were carried out on a Mono Q HR 5/5 strong anion-exchange column, applying an aqueous 1 mol dm(-3) NH4NO3 linear gradient elution over 15 min, at a flow rate of 1.0 cm3 min(-1). The separated Zn species were determined in 1.0 cm3 eluate fractions "off line" by FAAS. Speciation of Zn was also performed on a weak anion-exchange CIM DEAE fast monolithic disc by applying an aqueous 0.4 mol dm(-3) NH4NO3 linear gradient elution over 7.5 min, at a flow rate of 2.0 cm3 min(-1) and determination of the separated Zn species in 1.0 cm3 eluate fractions "off line" by FAAS. Zn-binding ligands in separated fractions were also characterized by electrospray (ES)-MS-MS analysis. The CIM DEAE disc was found to be more efficient in the separation of negatively charged Zn complexes than the Mono Q FPLC column. On the CIM DEAE disc Zn-citrate was separated from both Zn-oxalate and from Zn-EDTA. All these species were also separated from hydrated Zn2+, which was eluted with the solvent front. This method has an advantage over commonly used analytical techniques for the speciation of Zn which are only able to distinguish between labile and strong Zn complexes. Good repeatability of the measurements (RSD 2-4%), tested for six parallel determinations (2 microg cm(-3) Zn) of Zn-EDTA, Zn-citrate and Zn-oxalate was found at a pH of 6.4 on a CIM DAEA disc

  6. Electrostatic comb drive for vertical actuation

    Energy Technology Data Exchange (ETDEWEB)

    Lee, A. P., LLNL

    1997-07-10

    The electrostatic comb finger drive has become an integral design for microsensor and microactuator applications. This paper reports on utilizing the levitation effect of comb fingers to design vertical-to-the-substrate actuation for interferometric applications. For typical polysilicon comb drives with 2 {micro}m gaps between the stationary and moving fingers, as well as between the microstructures and the substrate, the equilibrium position is nominally 1-2 {micro}m above the stationary comb fingers. This distance is ideal for many phase shifting interferometric applications. Theoretical calculations of the vertical actuation characteristics are compared with the experimental results, and a general design guideline is derived from these results. The suspension flexure stiffnesses, gravity forces, squeeze film damping, and comb finger thicknesses are parameters investigated which affect the displacement curve of the vertical microactuator. By designing a parallel plate capacitor between the suspended mass and the substrate, in situ position sensing can be used to control the vertical movement, providing a total feedback-controlled system. Fundamentals of various capacitive position sensing techniques are discussed. Experimental verification is carried out by a Zygo distance measurement interferometer.

  7. Vertical reflector for bifacial PV-panels

    DEFF Research Database (Denmark)

    Jakobsen, Michael Linde; Thorsteinsson, Sune; Poulsen, Peter Behrensdorff;

    2016-01-01

    Bifacial solar modules offer an interesting price/performance ratio, and much work has been focused on directing the ground albedo to the back of the solar cells. In this work we design and develop a reflector for a vertical bifacial panel, with the objective to optimize the energy harvest...

  8. Manufacturing: the new case for vertical integration

    NARCIS (Netherlands)

    Kumpe, Ted; Bolwijn, Piet

    1988-01-01

    The article argues that the solid corporation will continue to view vertical integration as a critical part of manufacturing reform. Manufacturing reform and backward integration are related in insidious ways to the three stages of production over which the big manufacturers preside. Without integra

  9. CHLAMYDIA TRACHOMATIS: TRANSMISION VERTICAL CON MEMBRANAS INTEGRAS

    OpenAIRE

    2002-01-01

    Se presenta un caso clínico de transmisión vertical de Chlamydia trachomatis con membranas amniocoriónicas íntegras. Se discute esta rara vía de contagio realizando una revisión actualizada de su diagnóstico y tratamiento

  10. Optical anisotropy in vertically coupled quantum dots

    DEFF Research Database (Denmark)

    Yu, Ping; Langbein, Wolfgang Werner; Leosson, Kristjan;

    1999-01-01

    We have studied the polarization of surface and edge-emitted photoluminescence (PL) from structures with vertically coupled In0.5Ga0.5As/GaAs quantum dots (QD's) grown by molecular beam epitaxy. The PL polarization is found to be strongly dependent on the number of stacked layers. While single...... number due to increasing dot size....

  11. Sexual and vertical transmission of visceral leishmaniasis.

    Science.gov (United States)

    Turchetti, Andreia P; Souza, Tayse D; Paixão, Tatiane A; Santos, Renato L

    2014-04-15

    Visceral leishmaniasis (VL) is an important zoonosis caused by Leishmania infantum, which has in the domestic dog its principal vertebrate host. VL is usually transmitted by phlebotomine sand flies, however atypical routes of transmission have been described. In this review we discuss the the role of sexual and vertical transmissions, and their role in the maintenance of VL in canine populations.

  12. Certified standards and vertical coordination in aquaculture

    DEFF Research Database (Denmark)

    Trifkovic, Neda

    2014-01-01

    This paper explores the interaction between food standards and vertical coordination in the Vietnamese pangasius sector. For farmers and processors alike, the adoption of standards is motivated by a desire to improve market access by ensuring high quality supply. Instead of encouraging the applic...

  13. Vertically aligned biaxially textured molybdenum thin films

    Energy Technology Data Exchange (ETDEWEB)

    Krishnan, Rahul [Department of Materials Science and Engineering, Rensselaer Polytechnic Institute, Troy, New York 12180 (United States); Riley, Michael [Department of Chemical and Biological Engineering, Rensselaer Polytechnic Institute, Troy, New York 12180 (United States); Lee, Sabrina [US Army Armament Research, Development and Engineering Center, Benet Labs, Watervliet, New York 12189 (United States); Lu, Toh-Ming [Department of Physics, Applied Physics and Astronomy, Rensselaer Polytechnic Institute, Troy, New York 12180 (United States)

    2011-09-15

    Vertically aligned, biaxially textured molybdenum nanorods were deposited using dc magnetron sputtering with glancing flux incidence (alpha = 85 degrees with respect to the substrate normal) and a two-step substrate-rotation mode. These nanorods were identified with a body-centered cubic crystal structure. The formation of a vertically aligned biaxial texture with a [110] out-of-plane orientation was combined with a [-110] in-plane orientation. The kinetics of the growth process was found to be highly sensitive to an optimum rest time of 35 seconds for the two-step substrate rotation mode. At all other rest times, the nanorods possessed two separate biaxial textures each tilted toward one flux direction. While the in-plane texture for the vertical nanorods maintains maximum flux capture area, inclined Mo nanorods deposited at alpha = 85 degrees without substrate rotation display a [-1-1-4] in-plane texture that does not comply with the maximum flux capture area argument. Finally, an in situ capping film was deposited with normal flux incidence over the biaxially textured vertical nanorods resulting in a thin film over the porous nanorods. This capping film possessed the same biaxial texture as the nanorods and could serve as an effective substrate for the epitaxial growth of other functional materials.

  14. Vertical reflector for bifacial PV-panels

    DEFF Research Database (Denmark)

    Jakobsen, Michael Linde; Thorsteinsson, Sune; Poulsen, Peter Behrensdorff

    2016-01-01

    Bifacial solar modules offer an interesting price/performance ratio, and much work has been focused on directing the ground albedo to the back of the solar cells. In this work we design and develop a reflector for a vertical bifacial panel, with the objective to optimize the energy harvest...

  15. Vertical distribution of natural radionuclides in soils

    Directory of Open Access Journals (Sweden)

    Lozano J. C.

    2012-04-01

    Full Text Available Low-level alpha spectrometry techniques using semiconductor detectors (PIPS and liquid scintillation counters (LKB Quantulus 1220™ were used in order to determine the activity concentration of 238U, 232Th, 234U, 230Th, 226Ra, and 210Pb in soil samples. The soils were collected from an old disused uranium mine located in southwest Spain. The soils were selected with different levels of influence from the installation, in such a way that they had different levels of radioactive contamination. The vertical profiles in the soils (down to 40 cm depth were studied in order to evaluate the vertical distribution of the natural radionuclides. The possible contamination of subsurface waters depends strongly on vertical migration, and the transfer to plants (herbs, shrubs, and trees also will depend on the distribution of the radionuclides in the root zone. The study of the activity ratios between radionuclides belonging to the same series allowed us to assess the differing behaviour of the radionuclides involved. The vertical profiles for these radionuclides were different at each sampling point, showing the local impact of the installation. However, the profiles per point were similar for the long-lived radionuclides of the 238TJ series (238U, 234U, 230Th, and 226Ra. Also, a major disequilibrium was observed between 210Pb and 226Ra in the surface layer, due to 222Rn emanation and subsequent surface deposition of 210Pb.

  16. Experiments and modelling on vertical flame spread

    Energy Technology Data Exchange (ETDEWEB)

    Keski-Rahkonen, O.; Mangs, J. [VTT Building and Transport, Espoo (Finland)

    2004-07-01

    he principle and some preliminary results are shown of a new vertical flame spread modelling effort. Quick experimental screenings on relevant phenomena are made, some models are evaluated, and a new set of needed measuring instruments is proposed. Finally a single example of FRNC cable is shown as application of the methods. (orig.)

  17. Digital Microfluidic System with Vertical Functionality

    Directory of Open Access Journals (Sweden)

    Brian F. Bender

    2015-11-01

    Full Text Available Digital (droplet microfluidics (DµF is a powerful platform for automated lab-on-a-chip procedures, ranging from quantitative bioassays such as RT-qPCR to complete mammalian cell culturing. The simple MEMS processing protocols typically employed to fabricate DµF devices limit their functionality to two dimensions, and hence constrain the applications for which these devices can be used. This paper describes the integration of vertical functionality into a DµF platform by stacking two planar digital microfluidic devices, altering the electrode fabrication process, and incorporating channels for reversibly translating droplets between layers. Vertical droplet movement was modeled to advance the device design, and three applications that were previously unachievable using a conventional format are demonstrated: (1 solutions of calcium dichloride and sodium alginate were vertically mixed to produce a hydrogel with a radially symmetric gradient in crosslink density; (2 a calcium alginate hydrogel was formed within the through-well to create a particle sieve for filtering suspensions passed from one layer to the next; and (3 a cell spheroid formed using an on-chip hanging-drop was retrieved for use in downstream processing. The general capability of vertically delivering droplets between multiple stacked levels represents a processing innovation that increases DµF functionality and has many potential applications.

  18. Oblique patterned etching of vertical silicon sidewalls

    Science.gov (United States)

    Bruce Burckel, D.; Finnegan, Patrick S.; David Henry, M.; Resnick, Paul J.; Jarecki, Robert L.

    2016-04-01

    A method for patterning on vertical silicon surfaces in high aspect ratio silicon topography is presented. A Faraday cage is used to direct energetic reactive ions obliquely through a patterned suspended membrane positioned over the topography. The technique is capable of forming high-fidelity pattern (100 nm) features, adding an additional fabrication capability to standard top-down fabrication approaches.

  19. Vertical eddy heat fluxes from model simulations

    Science.gov (United States)

    Stone, Peter H.; Yao, Mao-Sung

    1991-01-01

    Vertical eddy fluxes of heat are calculated from simulations with a variety of climate models, ranging from three-dimensional GCMs to a one-dimensional radiative-convective model. The models' total eddy flux in the lower troposphere is found to agree well with Hantel's analysis from observations, but in the mid and upper troposphere the models' values are systematically 30 percent to 50 percent smaller than Hantel's. The models nevertheless give very good results for the global temperature profile, and the reason for the discrepancy is unclear. The model results show that the manner in which the vertical eddy flux is carried is very sensitive to the parameterization of moist convection. When a moist adiabatic adjustment scheme with a critical value for the relative humidity of 100 percent is used, the vertical transports by large-scale eddies and small-scale convection on a global basis are equal: but when a penetrative convection scheme is used, the large-scale flux on a global basis is only about one-fifth to one-fourth the small-scale flux. Comparison of the model results with observations indicates that the results with the latter scheme are more realistic. However, even in this case, in mid and high latitudes the large and small-scale vertical eddy fluxes of heat are comparable in magnitude above the planetary boundary layer.

  20. Phase Diagram of Vertically Shaken Granular Matter

    CERN Document Server

    Eshuis, P; Lohse, D; Van der Meer, D; Van der Weele, K; Bos, Robert; Eshuis, Peter; Lohse, Detlef; Meer, Devaraj van der; Weele, Ko van der

    2006-01-01

    A shallow, vertically shaken granular bed in a quasi 2-D container is studied experimentally yielding a wider variety of phenomena than in any previous study: (1) bouncing bed, (2) undulations, (3) granular Leidenfrost effect, (4) convection rolls, and (5) granular gas. These phenomena and the transitions between them are characterized by dimensionless control parameters and combined in a full experimental phase diagram.

  1. Neurofibromatosis type II presenting as vertical diplopia.

    Science.gov (United States)

    Sokwala, Ahmed; Knapp, Christopher; Gottlob, Irene

    2004-09-01

    Neurofibromatosis type II (NF II) is rare and most commonly presents with hearing loss, tinnitus and/or vestibular disturbance in the third decade of life. The authors describe a rare case presenting with NF II with vertical diplopia due to IV(th) nerve palsy. The patient was otherwise asymptomatic despite multiple extensive lesions on MRI.

  2. Vertical mill simulation applied to iron ores

    Directory of Open Access Journals (Sweden)

    Douglas Batista Mazzinghy

    2015-04-01

    Full Text Available The application of vertical mills in regrind circuits is consolidated. This type of mill is now attracting interest in primary grinding applications, due to its higher efficiency when compared to ball mills, which are usually used at this stage. In this study, a coarse sample of iron ore was tested in a pilot scale grinding circuit with a vertical mill. Other three samples of pellet feed had already been tested with the methodology used in this study. The sample of coarse iron ore was characterized in laboratory tests carried out in a small batch ball mill. Selection and breakage function parameters were determined from the laboratory tests. The parameters were then used for simulating the pilot scale tests using Modsim™ software. The model previously implemented in Modsim™ has been successfully applied to represent the vertical mill operated with different ores. The simulations produced particle size distributions that were very close to the actual size distributions, and the predictions were accomplished only by imputing the calibrated parameters from the batch tests, the power draw and the feed size distribution of the pilot tests. The methodology is therefore useful for scale-up and simulation of vertical mills, only requiring laboratory tests that can be carried out in standard laboratory batch ball mills with small amounts of samples.

  3. Vertical root fractures and their management

    Science.gov (United States)

    Khasnis, Sandhya Anand; Kidiyoor, Krishnamurthy Haridas; Patil, Anand Basavaraj; Kenganal, Smita Basavaraj

    2014-01-01

    Vertical root fractures associated with endodontically treated teeth and less commonly in vital teeth represent one of the most difficult clinical problems to diagnose and treat. In as much as there are no specific symptoms, diagnosis can be difficult. Clinical detection of this condition by endodontists is becoming more frequent, where as it is rather underestimated by the general practitioners. Since, vertical root fractures almost exclusively involve endodontically treated teeth; it often becomes difficult to differentiate a tooth with this condition from an endodontically failed one or one with concomitant periodontal involvement. Also, a tooth diagnosed for vertical root fracture is usually extracted, though attempts to reunite fractured root have been done in various studies with varying success rates. Early detection of a fractured root and extraction of the tooth maintain the integrity of alveolar bone for placement of an implant. Cone beam computed tomography has been shown to be very accurate in this regard. This article focuses on the diagnostic and treatment strategies, and discusses about predisposing factors which can be useful in the prevention of vertical root fractures. PMID:24778502

  4. Vertical Dynamic Stiffness of Offshore Foundations

    DEFF Research Database (Denmark)

    Latini, Chiara; Cisternino, Michele; Zania, Varvara

    2016-01-01

    Nowadays, pile and suction caisson foundations are widely used to support offshore structures which are subjected to vertical dynamic loads. The dynamic soil-structure interaction of floating foundations (foundations embedded in a soil layer whose height is greater than the foundation length...

  5. Innovative Design of Vertical Axis Wind Turbine

    DEFF Research Database (Denmark)

    Chougule, Prasad

    2013-01-01

    The wind turbines can be classified as: i) Horizontal axis wind turbines (HAWT), and ii) Vertical axis wind turbines (VAWT). The HAWT is fully developed and the size is growing higher. Whereas, the VAWT is not developed because of the less efficiency and vibration issues of big structure. However...

  6. A Vertical Approach to Math Instruction

    Science.gov (United States)

    Gojak, Linda

    2012-01-01

    In the current era of mathematics standards, whether they are Common Core State Standards or other state standards, effective vertical mathematics teams offer an opportunity for teachers to grow professionally through shared experiences, for leadership to grow among the faculty, and for the school to change its perspective on the teaching and…

  7. Manufacturing: the new case for vertical integration

    NARCIS (Netherlands)

    Kumpe, Ted; Bolwijn, Piet T.

    1988-01-01

    The article argues that the solid corporation will continue to view vertical integration as a critical part of manufacturing reform. Manufacturing reform and backward integration are related in insidious ways to the three stages of production over which the big manufacturers preside. Without integra

  8. Vertical integration of HRD policy within companies

    NARCIS (Netherlands)

    Wognum, A.A.M.

    2001-01-01

    This study concerns HRD policy making in companies. More specifically, it explores whether so-called vertical integration of HRD policy at different organizational levels occurs within companies. The study involved forty-four large companies in the industrial and the financial and commercial service

  9. Manufacturing: the new case for vertical integration

    NARCIS (Netherlands)

    Kumpe, Ted; Bolwijn, Piet

    1988-01-01

    The article argues that the solid corporation will continue to view vertical integration as a critical part of manufacturing reform. Manufacturing reform and backward integration are related in insidious ways to the three stages of production over which the big manufacturers preside. Without

  10. Effect of gravity on vertical eye position.

    Science.gov (United States)

    Pierrot-Deseilligny, C

    2009-05-01

    There is growing evidence that gravity markedly influences vertical eye position and movements. A new model for the organization of brainstem upgaze pathways is presented in this review. The crossing ventral tegmental tract (CVTT) could be the efferent tract of an "antigravitational" pathway terminating at the elevator muscle motoneurons in the third nerve nuclei and comprising, upstream, the superior vestibular nucleus and y-group, the flocculus, and the otoliths. This pathway functions in parallel to the medial longitudinal fasciculus pathways, which control vertical eye movements made to compensate for all vertical head movements and may also comprise the "gravitational" vestibular pathways, involved in the central reflection of the gravity effect. The CVTT could provide the upgaze system with the supplement of tonic activity required to counteract the gravity effect expressed in the gravitational pathway, being permanently modulated according to the static positions of the head (i.e., the instantaneous gravity vector) between a maximal activity in the upright position and a minimal activity in horizontal positions. Different types of arguments support this new model. The permanent influence of gravity on vertical eye position is strongly suggested by the vertical slow phases and nystagmus observed after rapid changes in hypo- or hypergravity. The chin-beating nystagmus, existing in normal subjects with their head in the upside-down position, suggests that gravity is not compensated for in the downgaze system. Upbeat nystagmus due to brainstem lesions, most likely affecting the CVTT circuitry, is improved when the head is in the horizontal position, suggesting that this circuitry is involved in the counteraction of gravity between the upright and horizontal positions of the head. In downbeat nystagmus due to floccular damage, in which a permanent hyperexcitation of the CVTT could exist, a marked influence of static positions of the head is also observed. Finally

  11. Incorporation of vertical permeability test results in vertical miscible flood design and operation

    Energy Technology Data Exchange (ETDEWEB)

    Gillund, G.N.; Kamal, M.

    1984-03-01

    The original analysis of the Bigoray Nisku B miscible flood in Alberta, Canada indicated potential coning problems related to the level of vertical permeability. This paper presents the results of a vertical permeability test which were incorporated into a coning study. Additional reservoir data, along with the rate information from the coning study, will be used to revise the original reservoir simulation prediction and depletion strategy.

  12. Adaptation of the vertical vestibulo-ocular reflex in cats during low-frequency vertical rotation.

    Science.gov (United States)

    Fushiki, Hiroaki; Maruyama, Motoyoshi; Shojaku, Hideo

    2017-04-27

    We examined plastic changes in the vestibulo-ocular reflex (VOR) during low-frequency vertical head rotation, a condition under which otolith inputs from the vestibular system are essential for VOR generation. For adaptive conditioning of the vertical VOR, 0.02Hz sinusoidal pitch rotation for one hour about the earth's horizontal axis was synchronized with out-of-phase vertical visual stimulation from a random dot pattern. A vertical VOR was well evoked when the upright animal rotated around the earth-horizontal axis (EHA) at low frequency due to the changing gravity stimulus and dynamic stimulation of the otoliths. After adaptive conditioning, the amplitude of the vertical VOR increased by an average of 32.1%. Our observations showing plasticity in the otolithic contribution to the VOR may provide a new strategy for visual-vestibular mismatch training in patients with otolithic disorders. This low-frequency vertical head rotation protocol also provides a model for investigating the mechanisms underlying the adaptation of VORs mediated by otolith activation. Copyright © 2017 Elsevier B.V. All rights reserved.

  13. The distinctive vertical heterophoria of dyslexics

    Science.gov (United States)

    Quercia, Patrick; Quercia, Madeleine; Feiss, Léonard J; Allaert, François

    2015-01-01

    In this study, we looked for the presence of vertical heterophoria (VH) in 42 dyslexic children (22 males and 20 females) aged 118.5±12.9 months who were compared with a control group of 22 nondyslexic children (eleven males and eleven females) aged 112±9.8 months. Dyslexics presented a low-level (always observation of postural muscle tone. All these elements suggest that the VH could be of postural origin and somehow related to the vertical action of the oblique muscles. VH and torsion are not harmful per se. There is no statistical relationship between their level and the various parameters used to assess the reading skills of dyslexic children. VH and torsion could be a clinical marker of global proprioceptive dysfunction responsible for high-level multisensory disturbances secondary to poor spatial localization of visual and auditory information. This dysfunction might also explain the motor disorders concomitant to dyslexia. PMID:26445526

  14. Coupled Resonator Vertical Cavity Laser Diode

    Energy Technology Data Exchange (ETDEWEB)

    CHOQUETTE, KENT D.; CHOW, WENG W.; FISCHER, ARTHUR J.; GEIB, KENT M.; HOU, HONG Q.

    1999-09-16

    We report the operation of an electrically injected monolithic coupled resonator vertical cavity laser which consists of an active cavity containing In{sub x}Ga{sub 1{minus}x}As quantum wells optically coupled to a passive GaAs cavity. This device demonstrates novel modulation characteristics arising from dynamic changes in the coupling between the active and passive cavities. A composite mode theory is used to model the output modulation of the coupled resonator vertical cavity laser. It is shown that the laser intensity can be modulated by either forward or reverse biasing the passive cavity. Under forward biasing, the modulation is due to carrier induced changes in the refractive index, while for reverse bias operation the modulation is caused by field dependent cavity enhanced absorption.

  15. Coupled Resonator Vertical Cavity Laser Diodes

    Energy Technology Data Exchange (ETDEWEB)

    Choquette, K.D.; Chow, W.W.; Fischer, A.J.; Allerman, A.A.; Hou, H.Q.; Geib, K.M.

    1999-07-22

    For many applications, the device performance of edge emitting semiconductor lasers can be significantly improved through the use of multiple section devices. For example, cleaved coupled cavity (C3) lasers have been shown to provide single mode operation, wavelength tuning, high speed switching, as well as the generation of short pulses via mode-locking and Q-switching [1]. Using composite resonators within a vertical cavity laser opens up new possibilities due to the unique ability to tailor the coupling between the monolithic cavities, incorporate passive or active resonators which are spectrally degenerate or detuned, and to fabricate these devices in 2-dimensional arrays. Composite resonator vertical cavity lasers (CRVCL) have been examined using optical pumping and electrical injection [2-5]. We report on CRVCL diodes and show that efficient modulation of the laser emission can be achieved by either forward or reverse biasing the passive cavity within a CRVCL.

  16. Escrita Escolar Brasileira: a escrita vertical

    Directory of Open Access Journals (Sweden)

    Carlos André Xavier Villela

    2014-12-01

    Full Text Available O exame grafoscópico visa essencialmente a determinar se duas escritas partiram ou não de um mesmo punho. A fim de buscar dados empíricos capazes de melhor embasar uma valoração de raridade, diversos pesquisadores se dedicaram ao estudo dos sistemas de escrita. O presente trabalho analisa algumas bibliografias nacionais e estrangeiras que descrevem como se deu o alvorecer da escrita vertical e sua implantação no universo escolar brasileiro. Foi a partir das últimas décadas do século XIX que alógrafos cursivos verticais começaram a ser utilizados para o ensino da escrita. Os novos sistemas, sob a denominação escrita vertical, tiveram presença marcante em todo o mundo ocidental, sendo até hoje os sistemas predominantes em diversos países.

  17. Velocity Field in a Vertical Foam Film

    Science.gov (United States)

    Seiwert, Jacopo; Kervil, Ronan; Nou, Soniraks; Cantat, Isabelle

    2017-01-01

    The drainage of vertical foam films governs their lifetime. For a foam film supported on a rectangular solid frame, when the interface presents a low resistance to shear, the drainage dynamics involves a complex flow pattern at the film scale, leading to a drainage time proportional to the frame width. Using an original velocimetry technique, based on fluorescent foam films and photobleaching, we measure the horizontal and vertical components of the velocity in a draining film, thus providing the first quantitative experimental evidence of this flow pattern. Upward velocities up to 10 cm /s are measured close to the lateral menisci, whereas a slower velocity field is obtained in the center of the film, with comparable downwards and horizontal components. Scaling laws are proposed for all characteristic velocities, coupling gravitational effects, and capillary suction.

  18. New Urban Vertical Axis Wind Turbine Design

    Directory of Open Access Journals (Sweden)

    Alexandru-Mihai CISMILIANU

    2015-12-01

    Full Text Available This paper develops a different approach for enhancing the performance of Vertical Axis Wind Turbines for the use in the urban or rural environment and remote isolated residential areas. Recently the vertical axis wind turbines (VAWT have become more attractive due to the major advantages of this type of turbines in comparison to the horizontal axis wind turbines. We aim to enhance the overall performance of the VAWT by adding a second set of blades (3 x 2=6 blades following the rules of biplane airplanes. The model has been made to operate at a maximum power in the range of the TSR between 2 to 2.5. The performances of the VAWT were investigated numerically and experimentally and justify the new proposed design.

  19. Vertically Integrated Multiple Nanowire Field Effect Transistor.

    Science.gov (United States)

    Lee, Byung-Hyun; Kang, Min-Ho; Ahn, Dae-Chul; Park, Jun-Young; Bang, Tewook; Jeon, Seung-Bae; Hur, Jae; Lee, Dongil; Choi, Yang-Kyu

    2015-12-09

    A vertically integrated multiple channel-based field-effect transistor (FET) with the highest number of nanowires reported ever is demonstrated on a bulk silicon substrate without use of wet etching. The driving current is increased by 5-fold due to the inherent vertically stacked five-level nanowires, thus showing good feasibility of three-dimensional integration-based high performance transistor. The developed fabrication process, which is simple and reproducible, is used to create multiple stiction-free and uniformly sized nanowires with the aid of the one-route all-dry etching process (ORADEP). Furthermore, the proposed FET is revamped to create nonvolatile memory with the adoption of a charge trapping layer for enhanced practicality. Thus, this research suggests an ultimate design for the end-of-the-roadmap devices to overcome the limits of scaling.

  20. Vertically Integrated Multinationals and Productivity Spillovers

    DEFF Research Database (Denmark)

    Clementi, Federico; Bergmann, Friedrich

    How does the activity of foreign multinationals affect the competitiveness of local companies in the host countries? Previous studies have identified the interactions of domestic firms with foreign clients as main mechanism of diffusion of knowledge. However, backward productivity spillovers...... are not automatic. In this paper, we study how these externalities are affected by the strategy of vertical integration of foreign multinationals. Our analysis, based on firm-level data of European manufacturing companies, shows that local firms perceive weaker backward spillovers if client foreign affiliates...... are vertically integrated in their industry. The spillovers that arise from the activity of companies that do not invest in the domestic firms’ industry are 2.6 to 5 times stronger than the ones than come from affiliates of multinationals that invest in the industry of local firms....

  1. Vertical external cavity surface emitting semiconductor lasers

    CERN Document Server

    Holm, M

    2001-01-01

    Active stabilisation showed a relative locked linewidth of approx 3 kHz. Coarse tuning over 7 nm was achieved using a 3-plate birefingent filter plate while fine-tuning using cavity length change allowed tuning over 250 MHz. Vertical external cavity semiconductor lasers have emerged as an interesting technology based on current vertical cavity semiconductor laser knowledge. High power output into a single transverse mode has attracted companies requiring good fibre coupling for telecommunications systems. The structure comprises of a grown semiconductor Bragg reflector topped with a multiple quantum well gain region. This is then included in an external cavity. This device is then optically pumped to promote laser action. Theoretical modelling of AIGaAs based VECSEL structures was undertaken, showing the effect of device design on laser characteristics. A simple 3-mirror cavity was constructed to assess the static characteristics of the structure. Up to 153 mW of output power was achieved in a single transver...

  2. Vertical teaching principles: pregnancy induced hypertension

    Directory of Open Access Journals (Sweden)

    Nidhi Sharma

    2016-06-01

    Conclusions: Vertical integration of medical disciplines helps medical students to understand a clinical problem in the light of basic sciences. The modules beginning with the pathophysiology of pregnancy induced hypertension and concluded with anesthetic considerations. An elaborate module helps to translate an understanding of pharmaco therapeutics of hypertension in pregnancy. A well-trained medical student can help to reduce maternal mortality due to preeclampsia. [Int J Reprod Contracept Obstet Gynecol 2016; 5(6.000: 1739-1743

  3. Centro-lateral subperiosteal vertical midface lift

    Directory of Open Access Journals (Sweden)

    Hönig, Johannes Franz

    2014-03-01

    Full Text Available The use of fiberendoscopic video-assisted technique in facial rejuvenation is one of the most advances in aesthetic plastic surgery of the face. It substitutes the coronal incision without the necessity of skin resection and allows a vertical reposition of the mobile soft tissue of the midface in indicated cases. It can easily be done through a small incision of the scalp just behind the coronal incision and in the temporal area.

  4. Inverse scattering problem for quantum graph vertices

    CERN Document Server

    Cheon, Taksu; Turek, Ondrej

    2011-01-01

    We demonstrate how the inverse scattering problem of a quantum star graph can be solved by means of diagonalization of Hermitian unitary matrix when the vertex coupling is of the scale invariant (or F\\"ul\\H{o}p-Tsutsui) form. This enables the construction of quantum graphs with desired properties in a tailor-made fashion. The procedure is illustrated on the example of quantum vertices with equal transmission probabilities.

  5. Vertical Carbon Nanotube Device in Nanoporous Templates

    Science.gov (United States)

    Maschmann, Matthew Ralph (Inventor); Fisher, Timothy Scott (Inventor); Sands, Timothy (Inventor); Bashir, Rashid (Inventor)

    2014-01-01

    A modified porous anodic alumina template (PAA) containing a thin CNT catalyst layer directly embedded into the pore walls. CNT synthesis using the template selectively catalyzes SWNTs and DWNTs from the embedded catalyst layer to the top PAA surface, creating a vertical CNT channel within the pores. Subsequent processing allows for easy contact metallization and adaptable functionalization of the CNTs and template for a myriad of applications.

  6. Engineering high-performance vertical cavity lasers

    Energy Technology Data Exchange (ETDEWEB)

    Lear, K.L.; Hou, H.Q.; Hietala, V.M.; Choquette, K.D.; Schneider, R.P. Jr.

    1996-12-31

    The cw and high-speed performance of vertical cavity surface emitting laser diodes (VCSELs) are affected by both electrical and optical issues arising from the geometry and fabrication of these devices. Structures with low resistance semiconductor mirrors and Al-oxide confinement layers address these issues and have produced record performance including 50% power conversion efficiency and modulation bandwidths up to 20 GHz at small bias currents.

  7. The Design Philosophy for a Vertical Breakwater

    DEFF Research Database (Denmark)

    Vrijling, J. K.; Burcharth, H. F.; Voortman, H. G.

    2000-01-01

    A consistent risk-based design philosophy for vertical breakwaters is proposed. The design philosophy consists of a two-step approach. The first step is the definition of the main function of the breakwater, which leads to a definition of failure. The second step is the choice of the acceptable...... safety level. This may be done on the basis of comparison to existing codes, or by applying economic optimisation. Both methods are introduced in the paper...

  8. The distinctive vertical heterophoria of dyslexics.

    Science.gov (United States)

    Quercia, Patrick; Quercia, Madeleine; Feiss, Léonard J; Allaert, François

    2015-01-01

    In this study, we looked for the presence of vertical heterophoria (VH) in 42 dyslexic children (22 males and 20 females) aged 118.5±12.9 months who were compared with a control group of 22 nondyslexic children (eleven males and eleven females) aged 112±9.8 months. Dyslexics presented a low-level (always <1 prism diopter) VH combined with torsion. This oculomotor feature clearly separates the dyslexic group from the normal readers group. It is independent of the type of dyslexia. The essential feature of this VH is a lability that appears during specific stimulation of sensory receptors involved in postural regulation. This lability is demonstrated using a vertical Maddox test conducted under very specific conditions in which postural sensors are successively stimulated in a predetermined order. A quantitative variation in this VH may be seen during the Bielchowsky Head Tilt Test, which reveals hypertonia of the lower or upper oblique muscles. Vertical orthophoria can be achieved by placing low-power prisms asymmetrically within the direction of action of the superior or inferior oblique muscles. The selection of power and axis is not only guided by elements of the eye examination but also from observation of postural muscle tone. All these elements suggest that the VH could be of postural origin and somehow related to the vertical action of the oblique muscles. VH and torsion are not harmful per se. There is no statistical relationship between their level and the various parameters used to assess the reading skills of dyslexic children. VH and torsion could be a clinical marker of global proprioceptive dysfunction responsible for high-level multisensory disturbances secondary to poor spatial localization of visual and auditory information. This dysfunction might also explain the motor disorders concomitant to dyslexia.

  9. Electrically floating, near vertical incidence, skywave antenna

    Science.gov (United States)

    Anderson, Allen A.; Kaser, Timothy G.; Tremblay, Paul A.; Mays, Belva L.

    2014-07-08

    An Electrically Floating, Near Vertical Incidence, Skywave (NVIS) Antenna comprising an antenna element, a floating ground element, and a grounding element. At least part of said floating ground element is positioned between said antenna element and said grounding element. The antenna is separated from the floating ground element and the grounding element by one or more electrical insulators. The floating ground element is separated from said antenna and said grounding element by one or more electrical insulators.

  10. Radially Magnetized Protoplanetary Disk: Vertical Profile

    CERN Document Server

    Russo, Matthew

    2015-01-01

    This paper studies the response of a thin accretion disk to an external radial magnetic field. Our focus is on protoplanetary disks (PPDs), which are exposed during their later evolution to an intense, magnetized wind from the central star. A radial magnetic field is mixed into a thin surface layer, is wound up by the disk shear, and is pushed downward by a combination of turbulent mixing and ambipolar and Ohmic drift. The toroidal field reaches much greater strengths than the seed vertical field that is usually invoked in PPD models, even becoming superthermal. Linear stability analysis indicates that the disk experiences the magnetorotational instability (MRI) at a higher magnetization than a vertically magnetized disk when both the effects of ambipolar and Hall drift are taken into account. Steady vertical profiles of density and magnetic field are obtained at several radii between 0.06 and 1 AU in response to a wind magnetic field $B_r \\sim (10^{-4}$-$10^{-2})(r/{\\rm AU})^{-2}$ G. Careful attention is giv...

  11. Rotation of vertically oriented objects during earthquakes

    Science.gov (United States)

    Hinzen, Klaus-G.

    2012-10-01

    Vertically oriented objects, such as tombstones, monuments, columns, and stone lanterns, are often observed to shift and rotate during earthquake ground motion. Such observations are usually limited to the mesoseismal zone. Whether near-field rotational ground motion components are necessary in addition to pure translational movements to explain the observed rotations is an open question. We summarize rotation data from seven earthquakes between 1925 and 2009 and perform analog and numeric rotation testing with vertically oriented objects. The free-rocking motion of a marble block on a sliding table is disturbed by a pulse in the direction orthogonal to the rocking motion. When the impulse is sufficiently strong and occurs at the `right' moment, it induces significant rotation of the block. Numeric experiments of a free-rocking block show that the initiation of vertical block rotation by a cycloidal acceleration pulse applied orthogonal to the rocking axis depends on the amplitude of the pulse and its phase relation to the rocking cycle. Rotation occurs when the pulse acceleration exceeds the threshold necessary to provoke rocking of a resting block, and the rocking block approaches its equilibrium position. Experiments with blocks subjected to full 3D strong motion signals measured during the 2009 L'Aquila earthquake confirm the observations from the tests with analytic ground motions. Significant differences in the rotational behavior of a monolithic block and two stacked blocks exist.

  12. Dynamic stiffness of suction caissons - vertical vibrations

    Energy Technology Data Exchange (ETDEWEB)

    Ibsen, Lars Bo; Liingaard, M.; Andersen, Lars

    2006-12-15

    The dynamic response of offshore wind turbines are affected by the properties of the foundation and the subsoil. The purpose of this report is to evaluate the dynamic soil-structure interaction of suction caissons for offshore wind turbines. The investigation is limited to a determination of the vertical dynamic stiffness of suction caissons. The soil surrounding the foundation is homogenous with linear viscoelastic properties. The dynamic stiffness of the suction caisson is expressed by dimensionless frequency-dependent dynamic stiffness coefficients corresponding to the vertical degree of freedom. The dynamic stiffness coefficients for the foundations are evaluated by means of a dynamic three-dimensional coupled Boundary Element/Finite Element model. Comparisons are made with known analytical and numerical solutions in order to evaluate the static and dynamic behaviour of the Boundary Element/Finite Element model. The vertical frequency dependent stiffness has been determined for different combinations of the skirt length, Poisson's ratio and the ratio between soil stiffness and skirt stiffness. Finally the dynamic behaviour at high frequencies is investigated. (au)

  13. Wind speed vertical distribution at Mt. Graham

    CERN Document Server

    Hagelin, S; Lascaux, F

    2010-01-01

    The characterization of the wind speed vertical distribution V(h) is fundamental for an astronomical site for many different reasons: (1) the wind speed shear contributes to trigger optical turbulence in the whole troposphere, (2) a few of the astroclimatic parameters such as the wavefront coherence time (tau_0) depends directly on V(h), (3) the equivalent velocity V_0, controlling the frequency at which the adaptive optics systems have to run to work properly, depends on the vertical distribution of the wind speed and optical turbulence. Also, a too strong wind speed near the ground can introduce vibrations in the telescope structures. The wind speed at a precise pressure (200 hPa) has frequently been used to retrieve indications concerning the tau_0 and the frequency limits imposed to all instrumentation based on adaptive optics systems, but more recently it has been proved that V_200 (wind speed at 200 hPa) alone is not sufficient to provide exhaustive elements concerning this topic and that the vertical d...

  14. [Vertical talus: current diagnostic and therapy options].

    Science.gov (United States)

    Arbab, D; Rath, B; Quack, V; Lüring, C; Tingart, M

    2013-06-01

    Congenital vertical talus is a rare condition which presents as an isolated deformity or in association with neuromuscular and/or genetic disorders. Pathoanatomically the deformity shows a dislocated talonavicular and subtalar joint. The etiology and pathogenesis are still not finally determined although in some cases a genetic basis has been identified. The clinical picture is that of a flat, convex longitudinal arch with abduction and dorsiflexion of the forefoot and an elevated heel. Clinical diagnosis is confirmed by plain radiographic imaging. Congenital vertical talus should not be confused with other deformities of the foot, such as congenital oblique talus, flexible flat feet or pes calcaneus. The object of treatment of congenital vertical talus is to restore a normal anatomical relationship between the talus, navicular and calcaneus to obtain a pain-free foot. Major reconstructive surgery has been reported to be effective but is associated with substantial complications. Good early results of a modified non-operative treatment using serial manipulation, cast treatment and minimally invasive surgery may change therapeutic concepts.

  15. Lunar and Vertical Distribution of Myctophidae

    Science.gov (United States)

    Tsarin, S.

    The Myctophidae are the most numerous of the mesopelagic fishes in all oceans. Daily vertical migrations which connected with nutrition and energy exchange, are charac- teristic feature of the myctophids behavior. Myctophidae in main during the nighttime basic feed. There are two ecological groups of Myctophidae on the type of vertical migrations. (Some scientists select the third intermediate group). Superficial (nyc- toepipelagic) myctophids are species, which during the nighttime arrive at surface of water. Layer myctophids are fishes, which are located in the main pycnocline (thermo- and halocline) and enter into composition of fauna of sound scattering layers (SSL) during the nighttime. However lunar light is hardly influenced on the upper bound of myctophids localization during the night. Agrees Barham (1970) all Myctophidae are divided on two morphoecological types: active and inactive. These types differ on morphology, on a response on light, under the contents of lipids into organism. To the first type concern all superficial Myctophidae and majority of myctophids of the night zone of pycnocline, including the most numerous genus - Diaphus. To an inactive type concern myctophids of the second genus on number of species from the family - Lam- panyctus. Superficial Myctophidae do not achieve the surfaces of water for want of vertical migrations for want of maximum and intensive lunar light. They are located in SSL. Inactive layer myctophids are in this case located deeper than main SSL. Lunar light practically does not influence on remaining active layer Myctophidae.

  16. Vertical tectonics at an active continental margin

    Science.gov (United States)

    Houlié, N.; Stern, T. A.

    2017-01-01

    Direct observations of vertical movements of the earth's surface are now possible with space-based GPS networks, and have applications to resources, hazards and tectonics. Here we present data on vertical movements of the Earth's surface in New Zealand, computed from the processing of GPS data collected between 2000 and 2015 by 189 permanent GPS stations. We map the geographical variation in vertical rates and show how these variations are explicable within a tectonic framework of subduction, volcanic activity and slow slip earthquakes. Subsidence of >3 mm/yr is observed along southeastern North Island and is interpreted to be due to the locked segment of the Hikurangi subduction zone. Uplift of 1-3 mm/yr further north along the margin of the eastern North Island is interpreted as being due to the plate interface being unlocked and underplating of sediment on the subduction thrust. The Volcanic Plateau of the central North Island is being uplifted at about 1 mm/yr, which can be explained by basaltic melts being injected in the active mantle-wedge at a rate of ∼6 mm/yr. Within the Central Volcanic Region there is a 250 km2 area that subsided between 2005 and 2012 at a rate of up to 14 mm/yr. Time series from the stations located within and near the zone of subsidence show a strong link between subsidence, adjacent uplift and local earthquake swarms.

  17. A Vertically Integrated Junctionless Nanowire Transistor.

    Science.gov (United States)

    Lee, Byung-Hyun; Hur, Jae; Kang, Min-Ho; Bang, Tewook; Ahn, Dae-Chul; Lee, Dongil; Kim, Kwang-Hee; Choi, Yang-Kyu

    2016-03-09

    A vertically integrated junctionless field-effect transistor (VJ-FET), which is composed of vertically stacked multiple silicon nanowires (SiNWs) with a gate-all-around (GAA) structure, is demonstrated on a bulk silicon wafer for the first time. The proposed VJ-FET mitigates the issues of variability and fabrication complexity that are encountered in the vertically integrated multi-NW FET (VM-FET) based on an identical structure in which the VM-FET, as recently reported, harnesses a source and drain (S/D) junction for its operation and is thus based on the inversion mode. Variability is alleviated by bulk conduction in a junctionless FET (JL-FET), where current flows through the core of the SiNW, whereas it is not mitigated by surface conduction in an inversion mode FET (IM-FET), where current flows via the surface of the SiNW. The fabrication complexity is reduced by the inherent JL structure of the JL-FET because S/D formation is not required. In contrast, it is very difficult to dope the S/D when it is positioned at each floor of a tall SiNW with greater uniformity and with less damage to the crystalline structure of the SiNW in a VM-FET. Moreover, when the proposed VJ-FET is used as nonvolatile flash memory, the endurance and retention characteristics are improved due to the above-mentioned bulk conduction.

  18. Orthogonal Thin Film Photovoltaics on Vertical Nanostructures.

    Science.gov (United States)

    Ahnood, Arman; Zhou, H; Suzuki, Y; Sliz, R; Fabritius, T; Nathan, Arokia; Amaratunga, G A J

    2015-12-01

    Decoupling paths of carrier collection and illumination within photovoltaic devices is one promising approach for improving their efficiency by simultaneously increasing light absorption and carrier collection efficiency. Orthogonal photovoltaic devices are core-shell type structures consisting of thin film photovoltaic stack on vertical nanopillar scaffolds. These types of devices allow charge collection to take place in the radial direction, perpendicular to the path of light in the vertical direction. This approach addresses the inherently high recombination rate of disordered thin films, by allowing semiconductor films with minimal thicknesses to be used in photovoltaic devices, without performance degradation associated with incomplete light absorption. This work considers effects which influence the performance of orthogonal photovoltaic devices. Illumination non-uniformity as light travels across the depth of the pillars, electric field enhancement due to the nanoscale size and shape of the pillars, and series resistance due to the additional surface structure created through the use of pillars are considered. All of these effects influence the operation of orthogonal solar cells and should be considered in the design of vertically nanostructured orthogonal photovoltaics.

  19. Vertical and horizontal seismometric observations of tides

    Science.gov (United States)

    Lambotte, S.; Rivera, L.; Hinderer, J.

    2006-01-01

    Tidal signals have been largely studied with gravimeters, strainmeters and tiltmeters, but can also be retrieved from digital records of the output of long-period seismometers, such as STS-1, particularly if they are properly isolated. Horizontal components are often noisier than the vertical ones, due to sensitivity to tilt at long periods. Hence, horizontal components are often disturbed by local effects such as topography, geology and cavity effects, which imply a strain-tilt coupling. We use series of data (duration larger than 1 month) from several permanent broadband seismological stations to examine these disturbances. We search a minimal set of observable signals (tilts, horizontal and vertical displacements, strains, gravity) necessary to reconstruct the seismological record. Such analysis gives a set of coefficients (per component for each studied station), which are stable over years and then can be used systematically to correct data from these disturbances without needing heavy numerical computation. A special attention is devoted to ocean loading for stations close to oceans (e.g. Matsushiro station in Japon (MAJO)), and to pressure correction when barometric data are available. Interesting observations are made for vertical seismometric components; in particular, we found a pressure admittance between pressure and data 10 times larger than for gravimeters for periods larger than 1 day, while this admittance reaches the usual value of -3.5 nm/s 2/mbar for periods below 3 h. This observation may be due to instrumental noise, but the exact mechanism is not yet understood.

  20. A Vertical Grid Module for Baroclinic Models of the Atmosphere

    Energy Technology Data Exchange (ETDEWEB)

    Drake, John B [ORNL

    2008-04-01

    The vertical grid of an atmospheric model assigns dynamic and thermo- dynamic variables to grid locations. The vertical coordinate is typically not height but one of a class of meteorological variables that vary with atmo- spheric conditions. The grid system is chosen to further numerical approx- imations of the boundary conditions so that the system is terrain following at the surface. Lagrangian vertical coordinates are useful in reducing the numerical errors from advection processes. That the choices will effect the numercial properties and accuracy is explored in this report. A MATLAB class for Lorentz vertical grids is described and applied to the vertical struc- ture equation and baroclinic atmospheric circulation. A generalized meteo- rolgoical coordinate system is developed which can support σ, isentropic θ vertical coordinate, or Lagrangian vertical coordinates. The vertical atmo- spheric column is a MATLAB class that includes the kinematic and ther- modynamic variables along with methods for computing geopoentials and terms relevant to a 3D baroclinc atmospheric model.

  1. Gating Technology for Vertically Parted Green Sand Moulds

    DEFF Research Database (Denmark)

    Larsen, Per

    Gating technology for vertically parted green sand moulds. Literature study of different ways of designing gating systems.......Gating technology for vertically parted green sand moulds. Literature study of different ways of designing gating systems....

  2. The correction of occlusal vertical dimension on tooth wear

    Directory of Open Access Journals (Sweden)

    Rostiny Rostiny

    2007-12-01

    Full Text Available The loss of occlusal vertical dimension which is caused by tooth wear is necessarily treated to regain vertical dimension. Correctional therapy should be done as early possible. In this case, simple and relatively low cost therapy was performed. In unserve loss of occlusal vertical dimension, partial removable denture could be used and the improvement of lengthening anterior teeth using composite resin to improve to regain vertical dimensional occlusion.

  3. Selection of Digestion Solution for Determining Zn in Soil by Microwave Digestion-FAAS%微波消解原子分光光度法测定土壤中锌含量消解液的筛选

    Institute of Scientific and Technical Information of China (English)

    耿昭克

    2016-01-01

    Objective] To select the optimal digestion solution for determining Zn in soil by microwave digestion – FAAS.[Methods] micro-wave digestion –FAAS was applied.Hydrochloric acid +nitric acid +hydrofluoric acid and hydrochloric acid +nitric acid +hydrogen per-oxide solution were taken as digestion solution separately.And comparative analysis experiment was carried.[Results] In the process of determi-ning Zn in soil by microwave digestion – FAAS, the digestion was complete when using hydrochloric acid +nitric acid +hydrofluoric acid as digestion solution, but the absorbance was abnormal and irregularity was high, leading to failure of the experiment; hydrochloric acid +nitric acid +hydrogen peroxide solution as the digestion solution could dissolve most Zn element in soil and satisfy the analysis requirement .[ Conclu-sion] Taking hydrochloric acid +nitric acid +hydrogen peroxide solution as the digestion solution meets requirement of analysis precision in determining the soil Zn content.%[目的]筛选微波消解原子分光光度法测定土壤中锌含量的最优消解液。[方法]采用微波消解原子分光光度法测定土壤中锌含量,分别用盐酸+硝酸+氢氟酸、盐酸+硝酸+双氧水作为消解液,对土壤样品进行微波消解,通过对比分析试验,优化合适的消解液。[结果]微波消解原子分光光度法测定土壤锌含量过程中,采用盐酸+硝酸+氢氟酸消解液,消解较为完全,但是吸光度异常、无规律偏高,导致试验失败;盐酸+硝酸+双氧水消解液,能溶解土壤中大部分锌元素,满足分析要求。[结论]采用盐酸+硝酸+双氧水作为消解液测定土壤锌含量满足分析精度要求。

  4. Are all types of vertical information created equal?

    Science.gov (United States)

    Weisberg, Steven M; Newcombe, Nora S

    2013-10-01

    The vertical component of space occurs in two distinct fashions in natural environments. One kind of verticality is orthogonal-to-horizontal (as in climbing trees, operating in volumetric spaces such as water or air, or taking elevators in multilevel buildings). Another kind of verticality, which might be functionally distinct, comes from navigating on sloped terrain (as in traversing hills or ramps).

  5. Vertical emission profiles for Europe based on plume rise calculations

    NARCIS (Netherlands)

    Bieser, J.; Aulinger, A.; Matthias, V.; Quante, M.; Denier Van Der Gon, H.A.C.

    2011-01-01

    The vertical allocation of emissions has a major impact on results of Chemistry Transport Models. However, in Europe it is still common to use fixed vertical profiles based on rough estimates to determine the emission height of point sources. This publication introduces a set of new vertical profile

  6. Vertical fluxes of sediment in oscillatory sheet flow

    NARCIS (Netherlands)

    Nielsen, Peter; van der Wal, K.U.; Gillan, Luke

    2002-01-01

    Time series of vertical sediment fluxes are derived from concentration time series in sheet flow under waves. While the concentrations C(z,t) vary very little with time for |z|<10d50, the measured vertical sediment fluxes Qzs(z,t) vary strongly with time in this vertical band and their time variatio

  7. Circuit enhances vertical resolution in raster scanning systems

    Science.gov (United States)

    Alsovsky, W. H.; Greenwood, J. R.; Holley, O. M.

    1968-01-01

    Circuit enhances vertical resolution in electron beam, raster scanning systems exhibiting aperture distortion in the vertical direction. A sensitized area /image/ produces a video output when the scan beam nears it, which causes vertical elongation in the reconstructed images of all sensitized areas on the surface.

  8. Mechanical design of NASA Ames Research Center vertical motion simulator

    Science.gov (United States)

    Engelbert, D. F.; Bakke, A. P.; Chargin, M. K.; Vallotton, W. C.

    1976-01-01

    NASA has designed and is constructing a new flight simulator with large vertical travel. Several aspects of the mechanical design of this Vertical Motion Simulator (VMS) are discussed, including the multiple rack and pinion vertical drive, a pneumatic equilibration system, and the friction-damped rigid link catenaries used as cable supports.

  9. Compact polarization sensors with vertically integrated photodetectors

    Science.gov (United States)

    Onat, Bora M.; Ulu, Goekhan; Unlu, M. Selim

    1997-12-01

    We describe a new method of sensing the linear polarization of light in a single mesa device structure by vertically integrating two photodetectors. The monolithic architecture eliminates the need for several discrete components, such as polarization filters and beam splitters, thus reducing critical alignment requirements and cost for various optical systems. Applications include the simplification of reading heads in magneto-optical (MO) data storage devices and constructing imaging arrays for polarization vision. In imaging, polarization sensing can extract additional information from a scene otherwise not noticeable to the human eye, facilitating remote sensing, material classification, and biological imaging. The operation principle of our vertical cavity polarization detector (VCPD) is based on a resonant cavity enhanced (RCE) photodetector, being vertically integrated with a conventional photodetector. The RCE detector is constructed by integrating a thin absorption region into an asymmetric Fabry-Perot cavity. The top reflector is formed by the semiconductor air interface, while the bottom mirror is a distributed Bragg reflector (DBR). For off-normal incidence of light, the reflectivity of the semiconductor-air interface and DBR are significantly different for TE (s) and TM (p) polarizations. Thus the RCE detector provides resonance enhancement for TE, capturing the TE polarized light in the top detector. For TM polarized light, both reflectivities are small, therefore, light is transmitted to and absorbed in the bottom detector. A large contrast in TE/TM response of the top and bottom detectors is achieved and the linear polarization can be computed from their relative responses. Experimental results displaying good agreement with simulation results have been recently achieved and are presented.

  10. Vertical deformation at western part of Sumatra

    Energy Technology Data Exchange (ETDEWEB)

    Febriyani, Caroline, E-mail: caroline.fanuel@students.itb.ac.id; Prijatna, Kosasih, E-mail: prijatna@gd.itb.ac.id; Meilano, Irwan, E-mail: irwan.meilano@gd.itb.ac.id

    2015-04-24

    This research tries to make advancement in GPS signal processing to estimate the interseismic vertical deformation field at western part of Sumatra Island. The data derived by Continuous Global Positioning System (CGPS) from Badan Informasi Geospasial (BIG) between 2010 and 2012. GPS Analyze at Massachusetts Institute of Technology (GAMIT) software and Global Kalman Filter (GLOBK) software are used to process the GPS signal to estimate the vertical velocities of the CGPS station. In order to minimize noise due to atmospheric delay, Vienna Mapping Function 1 (VMF1) is used as atmospheric parameter model and include daily IONEX file provided by the Center for Orbit Determination in Europe (CODE) as well. It improves GAMIT daily position accuracy up to 0.8 mm. In a second step of processing, the GLOBK is used in order to estimate site positions and velocities in the ITRF08 reference frame. The result shows that the uncertainties of estimated displacement velocity at all CGPS stations are smaller than 1.5 mm/yr. The subsided deformation patterns are seen at the northern and southern part of west Sumatra. The vertical deformation at northern part of west Sumatra indicates postseismic phase associated with the 2010 and 2012 Northern Sumatra earthquakes and also the long-term postseismic associated with the 2004 and 2005 Northern Sumatra earthquakes. The uplifted deformation patterns are seen from Bukit Tinggi to Seblat which indicate a long-term interseismic phase after the 2007 Bengkulu earthquake and 2010 Mentawai earthquake. GANO station shows a subsidence at rate 12.25 mm/yr, indicating the overriding Indo-Australia Plate which is dragged down by the subducting Southeast Asian Plate.

  11. Intelligent Vertical Handoffs between Heterogeneous Communication Networks

    Institute of Scientific and Technical Information of China (English)

    ZHANG Qi; WANG Yi-hong; VICTOR O.K.; WANG Ying; ZHANG Ping

    2005-01-01

    This paper proposes an intelligent vertical handoff algorithm to maintain an ongoing call between a cellular mobile network and a Wireless Local Area Network (WLAN), based on the Received Signal Strength (RSS) threshold and an adaptive RSS hysteresis generated by fuzzy logic. In addition, the proposed algorithm accounts for the WLAN traffic loading and the direction of movement and speed of the Mobile Station (MS). Simulation results indicate that the proposed algorithm offers better system performance in terms of number of handoffs and probability of call dropping.

  12. Long wavelength vertical cavity surface emitting laser

    Science.gov (United States)

    Choquette, Kent D.; Klem, John F.

    2005-08-16

    Selectively oxidized vertical cavity lasers emitting near 1300 nm using InGaAsN quantum wells are reported for the first time which operate continuous wave below, at and above room temperature. The lasers employ two n-type Al.sub.0.94 Ga.sub.0.06 As/GaAs distributed Bragg reflectors each with a selectively oxidized current aperture adjacent to the active region, and the top output mirror contains a tunnel junction to inject holes into the active region. Continuous wave single mode lasing is observed up to 55.degree. C.

  13. Vertical Isolation for Photodiodes in CMOS Imagers

    Science.gov (United States)

    Pain, Bedabrata

    2008-01-01

    In a proposed improvement in complementary metal oxide/semi conduct - or (CMOS) image detectors, two additional implants in each pixel would effect vertical isolation between the metal oxide/semiconductor field-effect transistors (MOSFETs) and the photodiode of the pixel. This improvement is expected to enable separate optimization of the designs of the photodiode and the MOSFETs so as to optimize their performances independently of each other. The purpose to be served by enabling this separate optimization is to eliminate or vastly reduce diffusion cross-talk, thereby increasing sensitivity, effective spatial resolution, and color fidelity while reducing noise.

  14. Carbon export by vertically migrating zooplankton

    DEFF Research Database (Denmark)

    Hansen, Agnethe Nøhr; Visser, André W.

    2016-01-01

    Through diel vertical migration (DVM), zooplankton add an active transport to the otherwise passive sinking of detrital material that constitutes the biological pump. This active transport has proven difficult to quantify. We present a model that estimates both the temporal and depth characterist...... is transported than at either equatorial or boreal latitudes. We estimate that the amount of carbon transported below the mixed layer by migrating zooplankton in the North Atlantic Ocean constitutes 27% (16–30%) of the total export flux associated with the biological pump in that region...

  15. Supersaturation of vertically propagating internal gravity waves

    Science.gov (United States)

    Lindzen, Richard S.

    1988-01-01

    The usual assumption that vertically propagating internal gravity waves will cease growing with height once their amplitudes are such as to permit convective instability anywhere within the wave is reexamined. Two factors lead to amplitude limitation: (1) wave clipping associated with convective mixing, and (2) energetic constraints associated with the rate at which the wave can supply energy to the convection. It is found that these two factors limit supersaturation to about 50 percent for waves with short horizontal wavelengths and high relative phase speeds. Usually the degree of supersaturation will be much less. These factors also lead to a gradual, rather than sudden, cessation of wave growth with height.

  16. Vertical orbital dystopia: definition, classification and treatment.

    Science.gov (United States)

    Wolfe, S A; Sassani, R

    1995-01-01

    Correction of vertical orbital dystopia is an important component part of providing facial symmetry in a number of conditions of varied etiology having facial imbalance and asymmetry. The most important step is the initial one of making a proper diagnosis, since some conditions represent globe dystopia rather than true orbital dystopia, and can be treated by extracranial procedures. However, if an intracranial procedure is felt indicated, it adds to the safety rather than the complexity of the procedure, and one should not hesitate advocating this to the patient.

  17. Multilayer graphene under vertical electric field

    OpenAIRE

    Kumar, S. Bala; GUO, Jing

    2011-01-01

    We study the effect of vertical electric field (E-field) on the electronic properties of multilayer graphene. We show that the effective mass, electron velocity and density-of-state of a bilayer graphene are modified under the E-field. We also study the transformation of the band structure of multilayer graphenes. E-field induces finite (zero) bandgap in the even (odd)-layer ABA-stacking graphene. On the other hand, finite bandgap is induced in all ABC-stacking graphene. We also identify the ...

  18. Low-Level Flight Simulation: Vertical Cues

    Science.gov (United States)

    1983-09-01

    The ASPT visual s’ester Soiftware autoematic’ally droips the’m freim the scene- at altitudes above 2000 fe’et AGI.) In an attempt to make the cue’s...8217 vertical (V) field of view. The ASPT has a - 15’ view o er the nose. - 370 over the left side, and - 15’ over the right side. (The aircraft field of...simulation, the ASPT /F-16 provided several instructional features that were used in this study. A video display of the HUD (Figures 1 and 21 and forward

  19. Accountability vertical das empresas estatais federais brasileiras

    OpenAIRE

    Louzada, Sergio Vinicius

    2010-01-01

    O estudo investiga a accountability vertical das empresas estatais federais brasileiras realizadas através dos portais web. Para tanto, foram levantadas, na literatura, informações relevantes para a melhor compreensão do alcance do termo accountability, de forma a permitir o desenvolvimento de modelo de análise a ser utilizado no trabalho. O modelo proposto compreende 3 dimensões: “Transparência”, “Interação e Participação” e “Prestação de Contas e Resultado” a cada dimensão co...

  20. The distinctive vertical heterophoria of dyslexics

    OpenAIRE

    2015-01-01

    Patrick Quercia,1,2 Madeleine Quercia,3 Léonard J Feiss,3 François Allaert4 1Department of Ophthalmology, University Hospital, 2INSERM U1093, University Bourgogne Franche-Comté, Dijon, 3Office of Ophthalmology, Beaune, 4CEN Biotech, Dijon, France Abstract: In this study, we looked for the presence of vertical heterophoria (VH) in 42 dyslexic children (22 males and 20 females) aged 118.5±12.9 months who were compared with a control group o...

  1. The distinctive vertical heterophoria of dyslexics

    Directory of Open Access Journals (Sweden)

    Quercia P

    2015-09-01

    Full Text Available Patrick Quercia,1,2 Madeleine Quercia,3 Léonard J Feiss,3 François Allaert4 1Department of Ophthalmology, University Hospital, 2INSERM U1093, University Bourgogne Franche-Comté, Dijon, 3Office of Ophthalmology, Beaune, 4CEN Biotech, Dijon, France Abstract: In this study, we looked for the presence of vertical heterophoria (VH in 42 dyslexic children (22 males and 20 females aged 118.5±12.9 months who were compared with a control group of 22 nondyslexic children (eleven males and eleven females aged 112±9.8 months. Dyslexics presented a low-level (always <1 prism diopter VH combined with torsion. This oculomotor feature clearly separates the dyslexic group from the normal readers group. It is independent of the type of dyslexia. The essential feature of this VH is a lability that appears during specific stimulation of sensory receptors involved in postural regulation. This lability is demonstrated using a vertical Maddox test conducted under very specific conditions in which postural sensors are successively stimulated in a predetermined order. A quantitative variation in this VH may be seen during the Bielchowsky Head Tilt Test, which reveals hypertonia of the lower or upper oblique muscles. Vertical orthophoria can be achieved by placing low-power prisms asymmetrically within the direction of action of the superior or inferior oblique muscles. The selection of power and axis is not only guided by elements of the eye examination but also from observation of postural muscle tone. All these elements suggest that the VH could be of postural origin and somehow related to the vertical action of the oblique muscles. VH and torsion are not harmful per se. There is no statistical relationship between their level and the various parameters used to assess the reading skills of dyslexic children. VH and torsion could be a clinical marker of global proprioceptive dysfunction responsible for high-level multisensory disturbances secondary to poor

  2. Vertically Polarized Omnidirectional Printed Slot Loop Antenna

    DEFF Research Database (Denmark)

    Kammersgaard, Nikolaj Peter Iversen; Kvist, Søren H.; Thaysen, Jesper

    2015-01-01

    A novel vertically polarized omnidirectional printed slot loop antenna has been designed, simulated, fabricated and measured. The slot loop works as a magnetic loop. The loop is loaded with inductors to insure uniform and in-phase fields in the slot in order to obtain an omnidirectional radiation...... pattern. The antenna is designed for the 2.45 GHz Industrial, Scientific and Medical band. Applications of the antenna are many. One is for on-body applications since it is ideal for launching a creeping waves due to the polarization....

  3. Vertical-Screw-Auger Conveyer Feeder

    Science.gov (United States)

    Walton, Otis (Inventor); Vollmer, Hubert J. (Inventor)

    2016-01-01

    A conical feeder is attached to a vertically conveying screw auger. The feeder is equipped with scoops and rotated from the surface to force-feed regolith the auger. Additional scoops are possible by adding a cylindrical section above the conical funnel section. Such then allows the unit to collect material from swaths larger in diameter than the enclosing casing pipe of the screw auger. A third element includes a flexible screw auger. All three can be used in combination in microgravity and zero atmosphere environments to drill and recover a wide area of subsurface regolith and entrained volatiles through a single access point on the surface.

  4. Analytical Study on Wave Diffraction from a Vertical Circular Cylinder in Front of Orthogonal Vertical Walls

    Institute of Scientific and Technical Information of China (English)

    NING Dezhi; TENG Bin; SONG Xiangqun

    2005-01-01

    In this paper, the principle of mirror image is used to transform the problem of wave diffraction from a circular cylinder in front of orthogonal vertical walls into the problem of diffraction of four symmetric incident waves from four symmetrically arranged circular cylinders, and then the eigenfunction expansion of velocity potential and Grafs addition theorem are used to give the analytical solution to the wave diffraction problem. The relation of the total wave force on cylinder to the distance between the cylinder and orthogonal vertical walls and the incidence angle of wave is also studied by numerical computation.

  5. Principle of Cross Coupling Between Vertical Heat Turbulent Transport and Vertical Velocity and Determination of Cross Coupling Coefficient

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    It has been proved that there exists a cross coupling between vertical heat turbulent transport and vertical velocity by using linear thermodynamics. This result asserts that the vertical component of heat turbulent transport flux is composed of both the transport of the vertical potential temperature gralient and the coupling transport of the vertical velocity. In this paper, the coupling effect of vertical velocity on vertical heat turbulent transportation is validated by using observed data from the atmospheric boundary layer to determine cross coupling coefficients, and a series of significant properties of turbulent transportation are opened out. These properties indicate that the cross coupling coefficient is a logarithm function of the dimensionless vertical velocity and dimensionless height, and is not only related to the friction velocity u*,but also to the coupling roughness height zwo and the coupling temperature Two of the vertical velocity.In addition, the function relations suggest that only when the vertical velocity magnitude conforms to the limitation |W/u* | ≠ 1, and is above the level zwo, then the vertical velocity leads to the cross coupling effect on the vertical heat turbulent transport flux. The cross coupling theory and experimental results provide a challenge to the traditional turbulent K closure theory and the Monin-Obukhov similarity theory.

  6. 湿法消解火焰原子吸收光谱法测定盆栽看椒果中微量元素%Determination of Microelement in Capsicum Annuum by FAAS

    Institute of Scientific and Technical Information of China (English)

    陈晓红; 达古拉

    2013-01-01

    用HNO3-H2O2对样品进行消解,采用火焰原子吸收光谱法测定盆栽看椒中6种微量元素K、Ca、Fe、Zn、Cu、Mn.结果表明,在优化的实验工作条件下,对样品中6种微量元素可进行分别测定,互不干扰,方法回收率为87.0%~103.3%.%Sample was digested with HNO3-H2O2,microelements of K、Ca、Fe、Zn、Cu、Mn in Capsicum annuum were determined by FAAS.The results showed that six microelements coxisted in Capsicum annuum did not interfere with each other under the optimized conditions . The addition standard recovery was 87.0%~103.3%.

  7. Preconcentration of Cu(II), Cd(II) and Pb(II) on Amberlite XAD-4 resin functionalized with N,N'-bis(o-vanillinidene)-ethylenediamine and their determination by FAAS in water samples.

    Science.gov (United States)

    Efendioğlu, Ayşegül; Yağan Aşcı, Mehtap; Batı, Bekir

    2010-01-01

    A new polystyrene divinylbenzene-based chelating resin was synthesized by functionalizing Amberlite XAD-4 with N,N'-bis(o-vanillinidene)ethylenediamine. This resin was capable of preconcentrating Cu(II), Cd(II) and Pb(II) in water samples prior to FAAS determination. Various parameters, such as the pH, eluent type and concentration, volume of the eluent and the sample, and diverse ion effects have been studied. The recoveries for the analytes under the optimum working conditions were higher than 95%. The accuracy of the method was tested with standard reference materials (MBH-C31XB20, GBW-02703 and CRM BCR-32) and Cd(II), Cu(II) and Pb(II) standard solutions. The method was successfully applied to water samples.

  8. Drill and chop: modified vertical chop technique for hard cataract.

    Science.gov (United States)

    Kim, Dae Yune; Jang, Jung Hyun

    2012-01-01

    The authors describe a technique to improve the control and safety of vertical chopping during hard cataract surgery. Whereas the conventional vertical chop technique uses a sharp vertical chopper, the proposed technique uses a short blunt chopper. This requires complete engagement of the central nucleus by a phaco tip. The authors first drilled a hole into the endonucleus. By rotating the Kelman phaco tip clockwise, the nucleus was deeply impaled horizontally and firmly engaged with the phaco tip. This was followed by vertical chopping. This technique results in safer and more effective vertical chopping in patients with hard cataracts. Copyright 2012, SLACK Incorporated.

  9. Role of the vertical pressure gradient in wave boundary layers

    DEFF Research Database (Denmark)

    Jensen, Karsten Lindegård; Sumer, B. Mutlu; Vittori, Giovanna

    2014-01-01

    By direct numerical simulation (DNS) of the flow in an oscillatory boundary layer, it is possible to obtain the pressure field. From the latter, the vertical pressure gradient is determined. Turbulent spots are detected by a criterion involving the vertical pressure gradient. The vertical pressure...... gradient is also treated as any other turbulence quantity like velocity fluctuations and statistical properties of the vertical pressure gradient are calculated from the DNS data. The presence of a vertical pressure gradient in the near bed region has significant implications for sediment transport....

  10. FAAS Determination of Cadmium in Activated Carbon from Coal after Cloud Point Extraction%浊点萃取-火焰原子吸收光谱法测定煤质活性炭中镉含量

    Institute of Scientific and Technical Information of China (English)

    杨蒲晨; 赵发宝; 张鑫鑫

    2014-01-01

    煤质活性炭样品在微波消解仪中进行消解,采取浊点萃取进行处理,将待测元素有效收集,用火焰原子吸收光谱仪进行测定。试验中采取双硫腙为络合剂,以非离子型表面活性剂Triton X-100为萃取剂,选取测试效果最佳的元素分析谱线,优化原子吸收分析条件,采用基体匹配法消除其他元素的干扰,测定镉的检出限为0.003μg/mL。此方法用于分析煤质活性炭试样中镉含量,结果的相对标准偏差(n=6)为0.71%,回收率为103%。%The activated carbon sample digested by microwave digestion, taking the cloud point extraction for processing, effectively collected the element under test,, the test solutions were determined by FAAS. Using dithizone as complexing agent and Triton X-100 non-ionic surface active agent as the extractant, selecting optimal test line for element analysis, optimizing the conditions of FAAS, using the matrix matching method to eliminate the interference of other elements, the detection limit was 0.003μg/mL. The values of RSD's (n=6) was 0.71%, and recovery, 103%for this method respectively.

  11. Determinants of Arbovirus Vertical Transmission in Mosquitoes.

    Science.gov (United States)

    Lequime, Sebastian; Paul, Richard E; Lambrechts, Louis

    2016-05-01

    Vertical transmission (VT) and horizontal transmission (HT) of pathogens refer to parental and non-parental chains of host-to-host transmission. Combining HT with VT enlarges considerably the range of ecological conditions in which a pathogen can persist, but the factors governing the relative frequency of each transmission mode are poorly understood for pathogens with mixed-mode transmission. Elucidating these factors is particularly important for understanding the epidemiology of arthropod-borne viruses (arboviruses) of public health significance. Arboviruses are primarily maintained by HT between arthropod vectors and vertebrate hosts in nature, but are occasionally transmitted vertically in the vector population from an infected female to her offspring, which is a proposed maintenance mechanism during adverse conditions for HT. Here, we review over a century of published primary literature on natural and experimental VT, which we previously assembled into large databases, to identify biological factors associated with the efficiency of arbovirus VT in mosquito vectors. Using a robust statistical framework, we highlight a suite of environmental, taxonomic, and physiological predictors of arbovirus VT. These novel insights contribute to refine our understanding of strategies employed by arboviruses to persist in the environment and cause substantial public health concern. They also provide hypotheses on the biological processes underlying the relative VT frequency for pathogens with mixed-mode transmission that can be tested empirically.

  12. Flow and scour around vertical submerged structures

    Indian Academy of Sciences (India)

    KRISHNA PADA BAURI; ARINDAM SARKAR

    2016-09-01

    The safety of the foundations of submerged hydraulic structures due to excessive local scour is threatened by the erosive action of the waves and currents passing around these structures. Fish and aquatic habitat is seriously affected due to the modification of the flow field caused by these submerged structures. Hence, the problems of flow characteristics and erosion around submerged structures were investigated by various researchers. A comprehensive discussion of the investigations on flow characteristics and local scour due to steady currents and waves around vertical submerged structures are presented, which comprises scour process, dimensional analysis, parameters influencing scour, temporal evolution of scour, flow field, flow visualization techniques, variation of bed shear stress, scour depth determination formulas and scour countermeasures.Although past investigations establish the effect of various parameters on scour around vertical submerged structures for live and clear water condition, yet further studies are required to analyze the scour around group of submerged structures for various bed sediments, understand the flow physics around the group and upscale the model results for the prototype.

  13. Vertical Slot Convection: A linear study

    Energy Technology Data Exchange (ETDEWEB)

    McAllister, A. [Tokyo Univ. (Japan); Steinolfson, R. [Southwest Research Inst., San Antonio, TX (United States); Tajima, T. [Texas Univ., Austin, TX (United States). Inst. for Fusion Studies

    1992-11-01

    The linear stability properties of fluid convection in a vertical slot were studied. We use a Fourier-Chebychev decomposition was used to set up the linear eigenvalue problems for the Vertical Slot Convection and Benard problems. The eigenvalues, neutral stability curves, and critical point values of the Grashof number, G, and the wavenumber were determined. Plots of the real and imaginary parts of the eigenvalues as functions of G and {alpha} are given for a wide range of the Prandtl number, Pr, and special note is made of the complex mode that becomes linearly unstable above Pr {approximately} 12.5. A discussion comparing different special cases facilitates the physical understanding of the VSC equations, especially the interaction of the shear-flow and buoyancy induced physics. Making use of the real and imaginary eigenvalues and the phase properties of the eigenmodes, the eigenmodes were characterized. One finds that the mode structure becomes progressively simpler with increasing Pr, with the greatest complexity in the mid ranges where the terms in the heat equation are of roughly the same size.

  14. Vertical Slot Convection: A linear study

    Energy Technology Data Exchange (ETDEWEB)

    McAllister, A. (Tokyo Univ. (Japan)); Steinolfson, R. (Southwest Research Inst., San Antonio, TX (United States)); Tajima, T. (Texas Univ., Austin, TX (United States). Inst. for Fusion Studies)

    1992-11-01

    The linear stability properties of fluid convection in a vertical slot were studied. We use a Fourier-Chebychev decomposition was used to set up the linear eigenvalue problems for the Vertical Slot Convection and Benard problems. The eigenvalues, neutral stability curves, and critical point values of the Grashof number, G, and the wavenumber were determined. Plots of the real and imaginary parts of the eigenvalues as functions of G and [alpha] are given for a wide range of the Prandtl number, Pr, and special note is made of the complex mode that becomes linearly unstable above Pr [approximately] 12.5. A discussion comparing different special cases facilitates the physical understanding of the VSC equations, especially the interaction of the shear-flow and buoyancy induced physics. Making use of the real and imaginary eigenvalues and the phase properties of the eigenmodes, the eigenmodes were characterized. One finds that the mode structure becomes progressively simpler with increasing Pr, with the greatest complexity in the mid ranges where the terms in the heat equation are of roughly the same size.

  15. The capillary interaction between two vertical cylinders

    KAUST Repository

    Cooray, Himantha

    2012-06-27

    Particles floating at the surface of a liquid generally deform the liquid surface. Minimizing the energetic cost of these deformations results in an inter-particle force which is usually attractive and causes floating particles to aggregate and form surface clusters. Here we present a numerical method for determining the three-dimensional meniscus around a pair of vertical circular cylinders. This involves the numerical solution of the fully nonlinear Laplace-Young equation using a mesh-free finite difference method. Inter-particle force-separation curves for pairs of vertical cylinders are then calculated for different radii and contact angles. These results are compared with previously published asymptotic and experimental results. For large inter-particle separations and conditions such that the meniscus slope remains small everywhere, good agreement is found between all three approaches (numerical, asymptotic and experimental). This is as expected since the asymptotic results were derived using the linearized Laplace-Young equation. For steeper menisci and smaller inter-particle separations, however, the numerical simulation resolves discrepancies between existing asymptotic and experimental results, demonstrating that this discrepancy was due to the nonlinearity of the Laplace-Young equation. © 2012 IOP Publishing Ltd.

  16. Intuitive Mechanics: Inferences of Vertical Projectile Motion

    Directory of Open Access Journals (Sweden)

    Milana Damjenić

    2016-07-01

    Full Text Available Our intuitive knowledge of physics mechanics, i.e. knowledge defined through personal experience about velocity, acceleration, motion causes, etc., is often wrong. This research examined whether similar misconceptions occur systematically in the case of vertical projectiles launched upwards. The first experiment examined inferences of velocity and acceleration of the ball moving vertically upwards, while the second experiment examined whether the mass of the thrown ball and force of the throw have an impact on the inference. The results showed that more than three quarters of the participants wrongly assumed that maximum velocity and peak acceleration did not occur at the initial launch of the projectile. There was no effect of object mass or effect of the force of the throw on the inference relating to the velocity and acceleration of the ball. The results exceed the explanatory reach of the impetus theory, most commonly used to explain the naive understanding of the mechanics of object motion. This research supports that the actions on objects approach and the property transmission heuristics may more aptly explain the dissidence between perceived and actual implications in projectile motion.

  17. Effective solidity in vertical axis wind turbines

    Science.gov (United States)

    Parker, Colin M.; Leftwich, Megan C.

    2016-11-01

    The flow surrounding vertical axis wind turbines (VAWTs) is investigated using particle imaging velocimetry (PIV). This is done in a low-speed wind tunnel with a scale model that closely matches geometric and dynamic properties tip-speed ratio and Reynolds number of a full size turbine. Previous results have shown a strong dependance on the tip-speed ratio on the wake structure of the spinning turbine. However, it is not clear whether this is a speed or solidity effect. To determine this, we have measured the wakes of three turbines with different chord-to-diameter ratios, and a solid cylinder. The flow is visualized at the horizontal mid-plane as well as the vertical mid-plane behind the turbine. The results are both ensemble averaged and phase averaged by syncing the PIV system with the rotation of the turbine. By keeping the Reynolds number constant with both chord and diameter, we can determine how each effects the wake structure. As these parameters are varied there are distinct changes in the mean flow of the wake. Additionally, by looking at the vorticity in the phase averaged profiles we can see structural changes to the overall wake pattern.

  18. Determinants of Arbovirus Vertical Transmission in Mosquitoes.

    Directory of Open Access Journals (Sweden)

    Sebastian Lequime

    2016-05-01

    Full Text Available Vertical transmission (VT and horizontal transmission (HT of pathogens refer to parental and non-parental chains of host-to-host transmission. Combining HT with VT enlarges considerably the range of ecological conditions in which a pathogen can persist, but the factors governing the relative frequency of each transmission mode are poorly understood for pathogens with mixed-mode transmission. Elucidating these factors is particularly important for understanding the epidemiology of arthropod-borne viruses (arboviruses of public health significance. Arboviruses are primarily maintained by HT between arthropod vectors and vertebrate hosts in nature, but are occasionally transmitted vertically in the vector population from an infected female to her offspring, which is a proposed maintenance mechanism during adverse conditions for HT. Here, we review over a century of published primary literature on natural and experimental VT, which we previously assembled into large databases, to identify biological factors associated with the efficiency of arbovirus VT in mosquito vectors. Using a robust statistical framework, we highlight a suite of environmental, taxonomic, and physiological predictors of arbovirus VT. These novel insights contribute to refine our understanding of strategies employed by arboviruses to persist in the environment and cause substantial public health concern. They also provide hypotheses on the biological processes underlying the relative VT frequency for pathogens with mixed-mode transmission that can be tested empirically.

  19. Vertical transmission of HIV-an update.

    Science.gov (United States)

    Lala, Mamatha M; Merchant, Rashid H

    2010-11-01

    One of the greatest successes in AIDS research to date has by far been the discovery of successful interventions that interrupt the transmission of HIV from mother to child. It is however important to note that these successes have occurred largely in countries with great resources and the least burden of perinatal transmission of HIV. In the developing world wherein currently 95% of vertical transmission of HIV occurs, it is highly condemnable that still every minute an infected infant is said to be born in spite of the fact that vertical transmission is largely preventable, mainly because translating knowledge into practice is not always possible or feasible; This has led to a continuous growing numbers of children with HIV, thereby making pediatric HIV a looming problem rapidly draining the already burdened health care system of these countries. It is the need of the hour to appropriately address the challenges to achieve zero percent transmission of HIV from an infected mother to her child thereby giving a hope for an AIDS-free new generation worldwide.

  20. Your highness: vertical positions as perceptual symbols of power.

    Science.gov (United States)

    Schubert, Thomas W

    2005-07-01

    Metaphorically, power equals up. Drawing on embodied theories of cognition, the author argues that thinking about power involves mental simulation of space and can be interfered with by perception of vertical differences. Study 1 assessed image schemas for power and found a shared vertical difference metaphor. Studies 2, 3, and 4 showed that the judgment of a group's power is influenced by the group's vertical position in space and motor responses implying vertical movement. Study 5 ruled out that the influence of vertical position on power judgments is driven by valence differences. Study 6 showed that vertical position also influences the power judgment result itself. The evidence suggests that the concept of power is partly represented in perceptual form as vertical difference.

  1. Direct Observation of Ultralow Vertical Emittance using a Vertical Undulator - presentation slides

    Energy Technology Data Exchange (ETDEWEB)

    Wootton, Kent

    2015-09-17

    Direct emittance measurement based on vertical undulator is discussed. Emittance was evaluated from peak ratios, the smallest measured being =0.9 ±0.3 pm rad. The angular distribution of undulator radiation departs from Gaussian approximations, a fact of which diffraction-limited light sources should be aware.

  2. Muscle activation history at different vertical jumps and its influence on vertical velocity

    NARCIS (Netherlands)

    Kopper, Bence; Csende, Zsolt; Safar, Sandor; Hortobagyi, Tibor; Tihanyi, Jozsef

    In the present study we investigated displacement, time, velocity and acceleration history of center of mass (COM) and electrical activity of knee extensors to estimate the dominance of the factors influencing the vertical velocity in squat jumps (SJs), countermovement jumps (CMJs) and drop jumps

  3. Muscle activation history at different vertical jumps and its influence on vertical velocity

    NARCIS (Netherlands)

    Kopper, Bence; Csende, Zsolt; Safar, Sandor; Hortobagyi, Tibor; Tihanyi, Jozsef

    2013-01-01

    In the present study we investigated displacement, time, velocity and acceleration history of center of mass (COM) and electrical activity of knee extensors to estimate the dominance of the factors influencing the vertical velocity in squat jumps (SJs), countermovement jumps (CMJs) and drop jumps (D

  4. Relato de caso: transmissão vertical de dengue Case report: vertical dengue infection

    Directory of Open Access Journals (Sweden)

    Samara L. C. Maroun

    2008-12-01

    Full Text Available OBJETIVOS: Relatar um caso de transmissão vertical de dengue ocorrido durante epidemia de 2008 pelo vírus tipo II no Rio de Janeiro e revisar a literatura sobre transmissão vertical de dengue. DESCRIÇÃO: Relatamos um caso de transmissão vertical de dengue. Recém-nascido a termo do sexo feminino, peso de nascimento de 3.940 g, foi admitida na unidade de terapia intensiva neonatal com rash cutâneo, hipoatividade e febre no quinto dia de vida. O hemograma evidenciava plaquetopenia importante (38.000 plaquetas. A mãe apresentou quadro clínico compatível com dengue 3 dias antes do parto. Foram colhidos então IgM para dengue da mãe e do recém-nascido, realizados pelo método de ELISA, sendo positivos em ambos. Dengue tipo 2 foi detectado no recém-nascido através de reação em cadeia da polimerase. COMENTÁRIOS: Este relato enfatiza a importância do pediatra estar alerta para a possibilidade de transmissão vertical de dengue iniciando precocemente o tratamento.OBJECTIVES: To report a case of vertical dengue infection in a newborn from Rio de Janeiro, Brazil, and to review the literature concerning this problem. DESCRIPTION: We report a case of vertical dengue infection. Female neonate, birth weight 3,940 g, term, was admitted to a neonatal intensive care unit on the fifth day of life with fever and erythematous rash. Her mother had had dengue fever 3 days before delivery. Her platelet count was 38,000, dropping to 15,000. She did not have any hemorrhagic episodes, including cerebral hemorrhages. Anti-dengue antibodies (IgM were positive in the mother and infant. Dengue type 2 was detected in the infant using polymerase chain reaction. COMMENTS: This report emphasizes that pediatricians should be aware of the possibility of vertical dengue infection so that early management can be instituted.

  5. Vertical and Interfacial Transport in Wetlands (Invited)

    Science.gov (United States)

    Variano, E. A.

    2010-12-01

    The objective of this work is to understand the fluxes connecting the water column, substrate, and atmosphere in wetland environments. To do this, analytical, numerical, and laboratory models have been used to quantify the hydrodynamic contributions to vertical fluxes. A key question is whether the hydrodynamic transport can be modeled as a diffusivity, and, if so, what the vertical structure of this diffusivity is. This question will be addressed in a number of flow types and for a number of fluxes. The fluxes of interest are heat, sediment, dissolved gases (such as methane and oxygen) and other dissolved solutes (such as nutrients and pollutants). The flows of interest include: unidirectional current, reversing flow (under waves, seiches, and tides), wind-sheared surface flows, and thermal convection. Rain and bioturbation can be important, but are not considered in the modeling work discussed herein. Specifically, we will present results on gas transport at wind-sheared free surface, sediment transport in unidirectional flow, and heat transfer in an oscillating flow cause by a seiche. All three of these will be used to consider the question of appropriate analytical models for vertical transport. The analytic models considered here are all 1D models that assume homogeneity in the horizontal plane. The numerical models use finite element methods and resolve the flow around individual vegetation stems in an idealized geometry. Laboratory models discussed herein also use an idealized geometry. Vegetation is represented by an array of cylinders, whose geometry is modeled after Scirpus spp. wetlands in Northern California. The laboratory model is constructed in a way that allows optical access to the flow, even in dense vegetation and far from boundaries. This is accomplished by using fluoropolymer plastics to construct vegetation models. The optical access allows us to employ particle image velocimetry (PIV) and planar laser induced fluorescence (PLIF) to measure

  6. Hypotropic Dissociated Vertical Deviation; a Case Report

    Directory of Open Access Journals (Sweden)

    Zhale Rajavi

    2013-01-01

    Full Text Available Purpose: To report the clinical features of a rare case of hypotropic dissociated vertical deviation (DVD. Case report: A 25-year-old female was referred with unilateral esotropia, hypotropia and slow variable downward drift in her left eye. She had history of esotropia since she had been 3-4 months of age. Best corrected visual acuity was 20/20 in her right eye and 20/40 in the left one when hyperopia was corrected. She underwent bimedial rectus muscle recession of 5.25mm for 45 prism diopters (PDs of esotropia. She was orthophoric 3 months after surgery and no further operation was planned for correction of the hypotropic DVD. Conclusion: This rare case of hypotropic DVD showed only mild amblyopia in her non-fixating eye. The etiology was most probably acquired considering hyperopia as a sign of early onset accommodative esotropia.

  7. Vertical Solar Louver Project. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    Bier, C.J.

    1984-09-15

    The thermal network analysis computer program MICROPAS has been used to analyze Vertical Solar Louvers and other reference solar designs in eight selected climates. The results have been used to generate a set of correlation coefficients for use in performance predictions by the Solar Load Ratio method as described in The Passive Solar Design Handbook: Volume Three (1). At low mass VSL were shown to be superior to ordinary direct gain and equal to the trombe wall systems in energy savings. The energy savings advantage of VSL over direct gain disappears in comparable systems of high mass. Identical solar water tanks of oval cross section were compared in the water wall and VSL configurations.

  8. Premixed flame propagation in vertical tubes

    CERN Document Server

    Kazakov, Kirill A

    2015-01-01

    Analytical treatment of premixed flame propagation in vertical tubes with smooth walls is given. Using the on-shell flame description, equations describing quasi-steady flame with a small but finite front thickness are obtained and solved numerically. It is found that near the limits of inflammability, solutions describing upward flame propagation come in pairs having close propagation speeds, and that the effect of gravity is to reverse the burnt gas velocity profile generated by the flame. On the basis of these results, a theory of partial flame propagation driven by the gravitational field is developed. A complete explanation is given of the intricate observed behavior of limit flames, including dependence of the inflammability range on the size of the combustion domain, the large distances of partial flame propagation, and the progression of flame extinction. The role of the finite front-thickness effects is discussed in detail. Also, various mechanisms governing flame acceleration in smooth tubes are ide...

  9. Evidence for vertical ozone redistribution since 1967

    Science.gov (United States)

    Furrer, R.; Döhler, W.; Kirsch, H.-J.; Plessing, P.; Görsdorf, U.

    1993-03-01

    Long-term measurements of the ozone concentration in the vicinity of the city of Berlin have been performed with ground based Dobson spectrophotometers and balloon borne systems. The respective experiments cover the past 24 years. All data have been reevaluated and corrected towards uniform calibration standards, leading to the longest European data set of total column density, altitude-dependent ozone partial pressures and the corresponding temperatures. Smoothing algorithms unravel significant long-term trends. The analysis shows an increase of ozone concentration within the middle stratosphere (below 31 km height) as well as in the troposphere over the past 24 years. On the contrary, ongoing ozone depletion in the lower stratosphere has been found. The large scale vertical redistribution of atmospheric ozone in the troposphere and the lower stratosphere seems to be in agreement with model calculations and trend predictions that have their roots in changes of the chemical composition and the ozone photochemistry due to anthropogenically induced trace gas concentrations.

  10. Matrix model and dimensions at hypercube vertices

    CERN Document Server

    Morozov, A; Popolitov, A

    2015-01-01

    In hypercube approach to correlation functions in Chern-Simons theory (knot polynomials) the central role is played by the numbers of cycles, in which the link diagram is decomposed under different resolutions. Certain functions of these numbers are further interpreted as dimensions of graded spaces, associated with hypercube vertices. Finding these functions is, however, a somewhat non-trivial problem. In arXiv:1506.07516 it was suggested to solve it with the help of the matrix model technique, in the spirit of AMM/EO topological recursion. In this paper we further elaborate on this idea and provide a vast collection of non-trivial examples, related both to ordinary and virtual links and knots. Remarkably, most powerful versions of the formalism freely convert ordinary knots/links to virtual and back -- moreover, go beyond the knot-related set of the (2,2)-valent graphs.

  11. Analysis of Vertical Architecture Photogalvanic Cells

    CERN Document Server

    Mahmoudzadeh, Mohammad Ali

    2013-01-01

    A new configuration of the photogalvanic cells (PGCs) is proposed that relaxes some of the hard to achieve requirements for efficient conventional photogalvanic cells. Instead of illuminating the device perpendicular to the electrode as was done classically, the vertical alignment of PGCs is suggested so that the light comes in from the gap between the two electrodes. This way, the electron generation extends to the depth of the device and therefore slower kinetics are allowed for deep cells. The depth can also be adjusted according to the concentration of the dyes, which solves the high solubility problem of the electrode-illuminated cells. The configuration is mathematically modeled and the advantages over the conventional cell are shown. A computer model is built for more detailed analysis.

  12. Empirical study of vertical pneumatic conveying

    Energy Technology Data Exchange (ETDEWEB)

    Rautiainen, A.; Poikolainen, V.; Stewart, G.; Sarkomaa, P.

    1998-11-01

    A comprehensive description of vertical gas/solid two-phase flow using an elementary equation system and experimental techniques is presented. The equation system was derived from first principles and is presented in its entirety. The results from non- accelerating flow experiments conducted using a riser tube of bore 192 mm and height 16.2 m using spherical glass beads of average diameter 64{mu}m are presented graphically. These include, among others, results for total pressure drop, solids volume fraction, solids friction factor and particle slip velocity. Several instances of highly negative friction factors have been calculated. These were due to the internal recirculation of the solids at low superficial gas velocities. Under these conditions the flow of the suspension was often very spatially and temporally heterogeneous compared to the homogeneous flow field observed at high superficial gas velocities. All the presented results agree well qualitatively with those found in literature. (orig.) 23 refs.

  13. Vertical Analysis of Martian Drainage Basins

    Science.gov (United States)

    Stepinski, T. F.; OHara, W. J.

    2003-01-01

    We have performed a vertical analysis of drainage basins on Mars that were computationally extracted from DEMs based on the MOLA data. Longitudinal profiles of main streams are calculated and the slope-area relation is established for 20 basins coming from assorted martian locations. An identical analysis is done for 19 terrestrial river basins. Our results show that, in comparison to terrestrial basins, martian basins have more linear longitudinal profiles, more frequent existence of knickpoints, predominance of asymmetric location of the main stream in the basin, and smaller values of concavity exponent. This suggests a limited role for surface runoff on the global scale. However, two basins extracted from the slopes of martian volcanoes show a strong similarity to terrestrial basins, indicating a possible local role for the process of surface runoff.

  14. A vertically resolved model for phytoplankton aggregation

    Indian Academy of Sciences (India)

    Iris Kriest; Geoffrey T Evans

    2000-12-01

    This work presents models of the vertical distribution and flux of phytoplankton aggregates, including changes with time in the distribution of aggregate sizes and sinking speeds. The distribution of sizes is described by two parameters, the mass and number of aggregates, which greatly reduces the computational cost of the models. Simple experiments demonstrate the effects of aggregation on the timing and depth distribution of primary production and export. A more detailed ecological model is applied to sites in the Arabian Sea; it demonstrates that aggregation can be important for deep sedimentation even when its effect on surface concentrations is small, and it presents the difference in timing between settlement of aggregates and fecal pellets.

  15. Adaptive vertical handoff algorithm in heterogeneous networks

    Institute of Scientific and Technical Information of China (English)

    XIE Sheng-dong; WU Meng

    2007-01-01

    The integration of cellular network (CN) and wireless local area network (WLAN) is the trend of the next generation mobile communication systems, and nodes will handoff between the two kinds of networks. The received signal strength (RSS) is the dominant factor consijered when handoff occurs. In order to improve the handoff efficiency, this study proposes an adaptive decision algorithm for vertical handoff on the basis of fast Fourier transform (FFT). The algorithm makes handoff decision after analyzing the signal strength fluctuation which is caused by slow fading through FFT. Simulations show that the algorithm reduces the number of handoff by 35%, shortens the areas influenced by slow fading, and enables the nodes to make full use of WLAN in communication compared with traditional algorithms.

  16. Vertical structure of recent Arctic warming.

    Science.gov (United States)

    Graversen, Rune G; Mauritsen, Thorsten; Tjernström, Michael; Källén, Erland; Svensson, Gunilla

    2008-01-03

    Near-surface warming in the Arctic has been almost twice as large as the global average over recent decades-a phenomenon that is known as the 'Arctic amplification'. The underlying causes of this temperature amplification remain uncertain. The reduction in snow and ice cover that has occurred over recent decades may have played a role. Climate model experiments indicate that when global temperature rises, Arctic snow and ice cover retreats, causing excessive polar warming. Reduction of the snow and ice cover causes albedo changes, and increased refreezing of sea ice during the cold season and decreases in sea-ice thickness both increase heat flux from the ocean to the atmosphere. Changes in oceanic and atmospheric circulation, as well as cloud cover, have also been proposed to cause Arctic temperature amplification. Here we examine the vertical structure of temperature change in the Arctic during the late twentieth century using reanalysis data. We find evidence for temperature amplification well above the surface. Snow and ice feedbacks cannot be the main cause of the warming aloft during the greater part of the year, because these feedbacks are expected to primarily affect temperatures in the lowermost part of the atmosphere, resulting in a pattern of warming that we only observe in spring. A significant proportion of the observed temperature amplification must therefore be explained by mechanisms that induce warming above the lowermost part of the atmosphere. We regress the Arctic temperature field on the atmospheric energy transport into the Arctic and find that, in the summer half-year, a significant proportion of the vertical structure of warming can be explained by changes in this variable. We conclude that changes in atmospheric heat transport may be an important cause of the recent Arctic temperature amplification.

  17. Vertical semiconducting single-walled carbon nanotube Schottky diode

    Science.gov (United States)

    Jung, Sunghwan

    2014-07-01

    This paper presents a vertical semiconducting single-walled carbon nanotube (sSWCNT)-based Schottky device. For the first time, the author successfully demonstrated a vertical s-SWCNT Schottky diode on an anodized aluminum oxide (AAO) template. In the vertical pores of an AAO template s-SWCNTs were vertically grown and aligned. The vertical growth of s-SWCNTs inside the pores was achieved by successfully isolating the catalyst at the bottom of the pores by using redeposition enabled angled ion milling. The ends of the grown s-SWCNTs were coated with palladium and titanium to form Schottky and Ohmic contacts, respectively. The I-V characteristics of the vertical s-SWCNT paths engaging the Schottky and Ohmic contacts well demonstrated Schottky diode rectification.

  18. Decoration of vertical graphene with aerosol nanoparticles for gas sensing

    Science.gov (United States)

    Cui, Shumao; Guo, Xiaoru; Ren, Ren; Zhou, Guihua; Chen, Junhong

    2015-08-01

    A facile method was demonstrated to decorate aerosol Ag nanoparticles onto vertical graphene surfaces using a mini-arc plasma reactor. The vertical graphene was directly grown on a sensor electrode using a plasma-enhanced chemical vapor deposition (PECVD) method. The aerosol Ag nanoparticles were synthesized by a simple vapor condensation process using a mini-arc plasma source. Then, the nanoparticles were assembled on the surface of vertical graphene through the assistance of an electric field. Based on our observation, nonagglomerated Ag nanoparticles formed in the gas phase and were assembled onto vertical graphene sheets. Nanohybrids of Ag nanoparticle-decorated vertical graphene were characterized for ammonia gas detection at room temperature. The vertical graphene served as the conductance channel, and the conductance change upon exposure to ammonia was used as the sensing signal. The sensing results show that Ag nanoparticles significantly improve the sensitivity, response time, and recovery time of the sensor.

  19. Cephalometric Indicators of the Vertical Dimension of Occlusion

    OpenAIRE

    Strajnić, Ljiljana; Stanišić-Sinobad, Darinka; Marković, Dubravka; Stojanović, Ljiljana

    2008-01-01

    The aim of this investigation was to establish precise indicators of the vertical dimension of occlusion (VDO) which could be used as objective parameters in prosthodontic treatment providing exact control of the reconstructed vertical dimension of occlusion, early detection of errors and correction of the vertical dimension of occlusion during complete denture manufacturing. A total of 60 lateral cephalometric radiographs of subjects with natural dentition and class I skeletal ja...

  20. Robotic platform for traveling on vertical piping network

    Science.gov (United States)

    Nance, Thomas A; Vrettos, Nick J; Krementz, Daniel; Marzolf, Athneal D

    2015-02-03

    This invention relates generally to robotic systems and is specifically designed for a robotic system that can navigate vertical pipes within a waste tank or similar environment. The robotic system allows a process for sampling, cleaning, inspecting and removing waste around vertical pipes by supplying a robotic platform that uses the vertical pipes to support and navigate the platform above waste material contained in the tank.

  1. On perishability and Vertical Price Transmission: empirical evidences from Italy

    OpenAIRE

    Fabio Gaetano Santeramo; Stephan von Cramon-Taubadel

    2017-01-01

    Studies on the causes for asymmetries in vertical price transmission date back to decades ago, but the attention of theorists and empirical economists is still vivid. In particular the role of perishability is not fully defined. We investigate the vertical price transmission for a heterogeneous group of fruits and vegetables that differ for their degree of perishability. The error correction model we estimate allows to conclude that asymmetries in vertical price transmission tend to vanish fo...

  2. On perishability and Vertical Price Transmission: empirical evidences from Italy

    Directory of Open Access Journals (Sweden)

    Fabio Gaetano Santeramo

    2017-01-01

    Full Text Available Studies on the causes for asymmetries in vertical price transmission date back to decades ago, but the attention of theorists and empirical economists is still vivid. In particular the role of perishability is not fully defined. We investigate the vertical price transmission for a heterogeneous group of fruits and vegetables that differ for their degree of perishability. The error correction model we estimate allows to conclude that asymmetries in vertical price transmission tend to vanish for perishable products.

  3. A New Hypothesis for the Vertical Distribution of Atmospheric Aerosols

    CERN Document Server

    Selvam, A M; Ramana-Murthy, P V; Ramanamurty, Bh.V.

    1999-01-01

    A simple model which can explain the observed vertical distribution and size spectrum of atmospheric aerosol has been proposed. The model is based on a new physical hypothesis for the vertical mass exchange between the troposphere and the stratosphere. The vertical mass excange takes place through a gravity wave feedback mechanism. There is a close agreement between the model predicted aerosol distribution and size spectrum and the observed distributions.

  4. Finding people, papers, and posts: Vertical search algorithms and evaluation

    OpenAIRE

    2015-01-01

    There is a growing diversity of information access applications. While general web search has been dominant in the past few decades, a wide variety of so-called vertical search tasks and applications have come to the fore. Vertical search is an often used term for search that targets specific content. Examples include YouTube video search, Facebook graph search, Spotify music recommendation, product search, expertise retrieval, and scientific literature search. In a vertical search applicatio...

  5. EXPERIMENTAL STUDY ON WHOLE TREE VERTICAL TENSILE STRENGTH

    Institute of Scientific and Technical Information of China (English)

    Lihua CHEN; Xinxiao YU; Dongsheng ZHANG

    2004-01-01

    This paper studies the vertical tensile strength of whole tree roots under the same soil and landform conditions.The experiments show that the shape of a root system's distribution affects the vertical tensile strength of roots.Rhododendron trees have horizontal root systems,so the whole roots were pulled out in the experiment process.Populous purdomii has vertical roots,so the experiment continued quite a long time.Abies fabric has both vertical and horizontal main roots,so the P-S curve shows a multi-peak shape.

  6. Comparison of VP broadband tiltmeter and VS vertical pendulum tiltmeter

    Directory of Open Access Journals (Sweden)

    Wugang Ma

    2015-05-01

    Full Text Available Vertical pendulum (VP tiltmeter is a kind of earthquake precursor observation equipment, which is used to record the interaction force associated with astronomical tidal tilts caused. Currently, VP broadband tiltmeter and vertical sensor (VS vertical pendulum tiltmeter are primarily used. In this paper, we compare the two different instruments by using four aspects—mechanical structure, circuitry, zeroing, and bandwidth—based on their working principles and applications. We conclude that VP broadband tiltmeter is more superior compared with VS vertical pendulum tiltmeter because of its higher bandwidth and degree of automation.

  7. Condensation of refrigerants on vertical fluted tubes

    Energy Technology Data Exchange (ETDEWEB)

    Combs, S.K.; Mailen, G.S.; Murphy, R.W.

    1978-08-01

    Experiments were run to determine heat transfer performance of single vertical fluted tubes with selected fluids condensing on the outside. Working fluids included six fluorocarbons (Refrigerants 11, 21, 22, 113, 114, and 115) and a hydrocarbon (Refrigerant 600a or isobutane). The nine test tubes were of 2.54-cm (1-in.) nominal outside diameter and 1.2 m (4 ft) in length with from 0 (smooth) to 60 axial flutes. Condensing heat transfer coefficients ranged from 620 to 7900 W/m/sup 2/ . K (110 to 1400 Btu/hr . ft/sup 2/ . /sup 0/F) over the heat flux range of 2000 to 43,000 W/m/sup 2/ (920 to 13,600 Btu/hr . ft/sup 2/). All parameters are based on total condensing surface area. The data show that, for a given heat flux, a fluted tube can increase condensing coefficients up to 6.0 times smooth tube values. Further heat transfer enhancement was achieved by the use of drainage skirts on fluted tubes; these skirts effectively divided the 1.2-m (4-ft) tubes into two, four, and eight equal condensing lengths.

  8. Premixed flame propagation in vertical tubes

    Science.gov (United States)

    Kazakov, Kirill A.

    2016-04-01

    Analytical treatment of the premixed flame propagation in vertical tubes with smooth walls is given. Using the on-shell flame description, equations for a quasi-steady flame with a small but finite front thickness are obtained and solved numerically. It is found that near the limits of inflammability, solutions describing upward flame propagation come in pairs having close propagation speeds and that the effect of gravity is to reverse the burnt gas velocity profile generated by the flame. On the basis of these results, a theory of partial flame propagation driven by a strong gravitational field is developed. A complete explanation is given of the intricate observed behavior of limit flames, including dependence of the inflammability range on the size of the combustion domain, the large distances of partial flame propagation, and the progression of flame extinction. The role of the finite front-thickness effects is discussed in detail. Also, various mechanisms governing flame acceleration in smooth tubes are identified. Acceleration of methane-air flames in open tubes is shown to be a combined effect of the hydrostatic pressure difference produced by the ambient cold air and the difference of dynamic gas pressure at the tube ends. On the other hand, a strong spontaneous acceleration of the fast methane-oxygen flames at the initial stage of their evolution in open-closed tubes is conditioned by metastability of the quasi-steady propagation regimes. An extensive comparison of the obtained results with the experimental data is made.

  9. ATLAS LTCS Vertically Challenged System Lessons Learned

    Science.gov (United States)

    Patel, Deepak; Garrison, Matt; Ku, Jentung

    2014-01-01

    Re-planning of LTCS TVAC testing and supporting RTA (Receiver Telescope Assembly) Test Plan and Procedure document preparation. The Laser Thermal Control System (LTCS) is designed to maintain the lasers onboard Advanced Topographic Laser Altimeter System (ATLAS) at their operational temperatures. In order to verify the functionality of the LTCS, a thermal balance test of the thermal hardware was performed. During the first cold start of the LTCS, the Loop Heat Pipe (LHP) was unable to control the laser mass simulators temperature. The control heaters were fully on and the loop temperature remained well below the desired setpoint. Thermal analysis of the loop did not show these results. This unpredicted behavior of the LTCS was brought up to a panel of LHP experts. Based on the testing and a review of all the data, there were multiple diagnostic performed in order to narrow down the cause. The prevailing theory is that gravity is causing oscillating flow within the loop, which artificially increased the control power needs. This resulted in a replan of the LTCS test flow and the addition of a GSE heater to allow vertical operation.

  10. Vertical dispersion in vegetated shear flows

    Science.gov (United States)

    Rubol, Simonetta; Battiato, Ilenia; de Barros, Felipe P. J.

    2016-10-01

    Canopy layers control momentum and solute transport to and from the overlying water surface layer. These transfer mechanisms strongly dependent on canopy geometry, affect the amount of solute in the river, the hydrological retention and availability of dissolved solutes to organisms located in the vegetated layers, and are critical to improve water quality. In this work, we consider steady state transport in a vegetated channel under fully developed flow conditions. Under the hypothesis that the canopy layer can be described as an effective porous medium with prescribed properties, i.e., porosity and permeability, we model solute transport above and within the vegetated layer with an advection-dispersion equation with a spatially variable dispersion coefficient (diffusivity). By means of the Generalized Integral Transform Technique, we derive a semianalytical solution for the concentration field in submerged vegetated aquatic systems. We show that canopy layer's permeability affects the asymmetry of the concentration profile, the effective vertical spreading behavior, and the magnitude of the peak concentration. Due to its analytical features, the model has a low computational cost. The proposed solution successfully reproduces previously published experimental data.

  11. A vertical approach to cardiac arrhythmias.

    Science.gov (United States)

    Vaughan Williams, E M

    1987-10-01

    Study of cardiac arrhythmia may be pursued vertically, as up the rungs of a ladder, from symptom to ECG, to EPS, to local lesion, to intracellular metabolism and to alterations of the latter and their effects on charge-transfer by ions across the cell membrane. Raised intracellular cAMP and calcium concentrations are responses to normal physiological controls, and highly abnormal ECGs occur in normal people under stress without progressing to life threatening arrhythmias, yet do so in susceptible individuals. Conversely, appropriate stimulation can precipitate ventricular fibrillation in normal myocardium. Selective stimulation of different types of adrenoceptor has differing electrophysiological effects. Beta 1-adrenoceptors increase contraction and calcium current, and shorten action potential duration (APD) by increasing potassium conductance. Beta 2-adrenoceptors do not increase calcium entry, but shorten APD by stimulating electrogenic Na/K pumping, alpha-adrenoceptors prolong contractions and lengthen APD. It is suggested that the tachycardia, extrasystoles and shortening of APD occurring in response to adrenergic stimuli and hypoxia, are accessory factors, not primary causes, in the development of arrhythmias, and constitute a danger when there is an appropriate anatomical substrate for re-entry. Serious arrhythmias are of multifactorial origin, of which "calcium overload" is but one, not proven to be a frequent one.

  12. Vertical Distribution of Water at Phoenix

    Science.gov (United States)

    Tamppari, L. K.; Lemmon, M. T.

    2011-01-01

    Phoenix results, combined with coordinated observations from the Mars Reconnaissance Orbiter of the Phoenix lander site, indicate that the water vapor is nonuniform (i.e., not well mixed) up to a calculated cloud condensation level. It is important to understand the mixing profile of water vapor because (a) the assumption of a well-mixed atmosphere up to a cloud condensation level is common in retrievals of column water abundances which are in turn used to understand the seasonal and interannual behavior of water, (b) there is a long history of observations and modeling that conclude both that water vapor is and is not well-mixed, and some studies indicate that the water vapor vertical mixing profile may, in fact, change with season and location, (c) the water vapor in the lowest part of the atmosphere is the reservoir that can exchange with the regolith and higher amounts may have an impact on the surface chemistry, and (d) greater water vapor abundances close to the surface may enhance surface exchange thereby reducing regional transport, which in turn has implications to the net transport of water vapor over seasonal and annual timescales.

  13. Vertical transmission of Theileria lestoquardi in sheep.

    Science.gov (United States)

    Zakian, Amir; Nouri, Mohammad; Barati, Farid; Kahroba, Hooman; Jolodar, Abbas; Rashidi, Fardokht

    2014-07-14

    This is the first report of an outbreak of Theileria lestoquardi abortion and stillbirth in a mob of 450 ewes in July 2012, during which, approximately 35 late-term ewes lost their fetuses over a 5-day period. A dead ewe and her aborted fetus were transported to the Ahvaz Veterinary Hospital for the diagnostic evaluation. The microbial cultures from the ewe vaginal discharges and fetal abomasal contents and the liver were negative. The blood films of the ewe and her fetus contained Theileria piroplasms and the impression smears from ewe liver and fetal spleen were positive for Theileria Koch blue bodies. The DNA was extracted from the liver and spleen of ewe and her fetus, respectively, and analyzed by polymerase chain reaction (PCR) using specific primers derived from the nucleotide sequences of 18S ribosomal DNA (rDNA) gene of T. lestoquardi. A single fragment of 428-bp fragment was amplified. The PCR product was directly sequenced and the alignment of the sequence with similar sequences in GenBank(®) showed 100% identities with 18S rDNA gene of T. lestoquardi. The present study is the first report of the T. lestoquardi vertical transmission that could be related to the abortion.

  14. Vertical Distribution of Vibrationally Excited Hydroxyl

    Science.gov (United States)

    Grygalashvyly, Mykhaylo; Becker, Erich; Sonnemann, Gerd

    2016-04-01

    Knowledge about the vertical distribution of the vibrationally excited states of hydroxyl (OH*) is important for the interpretation of airglow measurements with respect to dynamical processes in the mesopause region. We derive an approximate analytical expression for the distribution of OH* that highlights the dependence on atomic oxygen and temperature. In addition, we use an advanced numerical model for the formation and relaxation of OH* and investigate the distributions of the different vibrationally exited states of OH*. For the production of OH*, the model includes the reaction of atomic hydrogen with ozone, as well as the reaction of atomic oxygen with hydroperoxy radicals. As loss processes we include 1) deactivation by atomic oxygen, molecular oxygen, and molecular nitrogen, 2) spontaneous emission, and 3) loss due to chemical reaction with atomic oxygen. All these processes take the dependence on the vibrational number into account. The quenching by molecular and atomic oxygen is parameterized by a multi-quantum relaxation scheme. This diagnostic model for OH* has been implemented as part of a chemistry-transport model that is driven by the dynamics simulated with the KMCM (Kühlungsborn Mechanistic general Circulation Model). Numerical results confirm that emission from excited states with higher vibrational number is weaker and emanates from higher altitudes. In addition we find that the OH*-peak altitudes depend significantly on season and latitude. This behavior is mainly controlled by the corresponding variations of atomic oxygen and temperature, as is also confirmed by the aforementioned approximate theory.

  15. Functionalization of vertically aligned carbon nanotubes

    Directory of Open Access Journals (Sweden)

    Eloise Van Hooijdonk

    2013-02-01

    Full Text Available This review focuses and summarizes recent studies on the functionalization of carbon nanotubes oriented perpendicularly to their substrate, so-called vertically aligned carbon nanotubes (VA-CNTs. The intrinsic properties of individual nanotubes make the VA-CNTs ideal candidates for integration in a wide range of devices, and many potential applications have been envisaged. These applications can benefit from the unidirectional alignment of the nanotubes, the large surface area, the high carbon purity, the outstanding electrical conductivity, and the uniformly long length. However, practical uses of VA-CNTs are limited by their surface characteristics, which must be often modified in order to meet the specificity of each particular application. The proposed approaches are based on the chemical modifications of the surface by functionalization (grafting of functional chemical groups, decoration with metal particles or wrapping of polymers to bring new properties or to improve the interactions between the VA-CNTs and their environment while maintaining the alignment of CNTs.

  16. Vertical barriers with increased sorption capacities

    Energy Technology Data Exchange (ETDEWEB)

    Bradl, H.B. [Bilfinger + Berger Bauaktiengesellschaft, Mannheim (Germany)

    1997-12-31

    Vertical barriers are commonly used for the containment of contaminated areas. Due to the very small permeability of the barrier material which is usually in the order of magnitude of 10-10 m/s or less the advective contaminant transport can be more or less neglected. Nevertheless, there will always be a diffusive contaminant transport through the barrier which is caused by the concentration gradient. Investigations have been made to increase the sorption capacity of the barrier material by adding substances such as organoclays, zeolites, inorganic oxides and fly ashes. The contaminants taken into account where heavy metals (Pb) and for organic contaminants Toluole and Phenantrene. The paper presents results of model calculations and experiments. As a result, barrier materials can be designed {open_quotes}tailor-made{close_quotes} depending on the individual contaminant range of each site (e.g. landfills, gasworks etc.). The parameters relevant for construction such as rheological properties, compressive strength and permeability are not affected by the addition of the sorbents.

  17. The vertical oscillations of coupled magnets

    Science.gov (United States)

    Kewei, Li; Jiahuang, Lin; Yang, Kang Zi; Liang, Samuel Yee Wei; Wong Say Juan, Jeremias

    2011-07-01

    The International Young Physicists' Tournament (IYPT) is a worldwide, annual competition for high school students. This paper is adapted from the winning solution to Problem 14, Magnetic Spring, as presented in the final round of the 23rd IYPT in Vienna, Austria. Two magnets were arranged on top of each other on a common axis. One was fixed, while the other could move vertically. Various parameters of interest were investigated, including the effective gravitational acceleration, the strength, size, mass and geometry of the magnets, and damping of the oscillations. Despite its simplicity, this setup yielded a number of interesting and unexpected relations. The first stage of the investigation was concerned only with the undamped oscillations of small amplitudes, and the period of small amplitude oscillations was found to be dependent only on the eighth root of important magnet properties such as its strength and mass. The second stage sought to investigate more general oscillations. A numerical model which took into account magnet size, magnet geometry and damping effects was developed to model the general oscillations. Air resistance and friction were found to be significant sources of damping, while eddy currents were negligible.

  18. Vertical landscraping, a big regionalism for Dubai.

    Science.gov (United States)

    Wilson, Matthew

    2010-01-01

    Dubai's ecologic and economic complications are exacerbated by six years of accelerated expansion, a fixed top-down approach to urbanism and the construction of iconic single-phase mega-projects. With recent construction delays, project cancellations and growing landscape issues, Dubai's tower typologies have been unresponsive to changing environmental, socio-cultural and economic patterns (BBC, 2009; Gillet, 2009; Lewis, 2009). In this essay, a theory of "Big Regionalism" guides an argument for an economically and ecologically linked tower typology called the Condenser. This phased "box-to-tower" typology is part of a greater Landscape Urbanist strategy called Vertical Landscraping. Within this strategy, the Condenser's role is to densify the city, facilitating the creation of ecologic voids that order the urban region. Delineating "Big Regional" principles, the Condenser provides a time-based, global-local urban growth approach that weaves Bigness into a series of urban-regional, economic and ecological relationships, builds upon the environmental performance of the city's regional architecture and planning, promotes a continuity of Dubai's urban history, and responds to its landscape issues while condensing development. These speculations permit consideration of the overlooked opportunities embedded within Dubai's mega-projects and their long-term impact on the urban morphology.

  19. Free convective condensation in a vertical enclosure

    Energy Technology Data Exchange (ETDEWEB)

    Fox, R.J.; Peterson, P.F. [Univ. of California, Berkeley, CA (United States); Corradini, M.L.; Pernsteiner, A.P. [Univ. of Wisconsin, Madison, WI (United States)

    1995-09-01

    Free convective condensation in a vertical enclosure was studied numerically and the results were compared with experiments. In both the numerical and experimental investigations, mist formation was observed to occur near the cooling wall, with significant droplet concentrations in the bulk. Large recirculation cells near the end of the condensing section were generated as the heavy noncondensing gas collecting near the cooling wall was accelerated downward. Near the top of the enclosure the recirculation cells became weaker and smaller than those below, ultimately disappearing near the top of the condenser. In the experiment the mist density was seen to be highest near the wall and at the bottom of the condensing section, whereas the numerical model predicted a much more uniform distribution. The model used to describe the formation of mist was based on a Modified Critical Saturation Model (MCSM), which allows mist to be generated once the vapor pressure exceeds a critical value. Equilibrium, nonequilibrium, and MCSM calculations were preformed, showing the experimental results to lie somewhere in between the equilibrium and nonequilibrium predictions of the numerical model. A single adjustable constant (indicating the degree to which equilibrium is achieved) is used in the model in order to match the experimental results.

  20. Numerical Simulation of Rotating Vertical Bridgman Growth

    Directory of Open Access Journals (Sweden)

    S. Nouri

    2016-01-01

    Full Text Available The present work is proposed a numerical parametric study of heat and mass transfer in a rotating vertical cylinder during the solidification of a binary metallic alloy. The aim of this paper is to present an enthalpy formulation based on the fixed grid methodology for the numerical solution of convective-diffusion during the phase change in the case of the steady crucible rotation. The extended Darcy model including the time derivative and Coriolis terms was applied as momentum equation. It was found that the buoyancy driven flow and solute distribution can be affected significantly by the rotating cylinder. The problem is governed by the Navier-Stokes equations coupled with the conservation laws of energy and solute. The resulting system was discretized by the control volume method and solved by the SIMPLER algorithm proposed by Patankar. A computer code was developed and validated by comparison with previous studies. It can be observed that the forced convection introduced by rotation, dramatically changes the flow and solute distribution at the interface (liquid-mushy zone. The effect of Reynolds number on the Nusselt number, flow and solute distribution is presented and discussed.

  1. Potential of Vertical Hydroponic Agriculture in Mexico

    Directory of Open Access Journals (Sweden)

    José de Anda

    2017-01-01

    Full Text Available In 2050, Mexico’s population will reach 150 million people, about 80% of whom will likely live in urban centers. This increase in population will necessitate increased food production in the country. The lands classified as drylands in Mexico occupy approximately 101.5 million hectares, or just over half the territory, limiting the potential for agricultural expansion. In addition to the problem of arid conditions in Mexico, there are conditions in other parts of the country related to low to very low water availability, resulting in pressure on the water resources in almost two-thirds of the country. Currently, agriculture uses 77% of the water withdrawn, primarily for food production. This sector contributes 12% of the total greenhouse gas emission (GHG production in the country. Given the conditions of pressure on water and land resources in Mexico and the need to reduce the carbon footprint, vertical farming technology could offer the possibility for sustainable food production in the urban areas of the country in the coming years.

  2. Mudflow rheology in a vertically rotating flume

    Science.gov (United States)

    Holmes, Jr., Robert R.; Westphal, Jerome A.; Jobson, Harvey E.; ,

    1990-01-01

    Joint research by the U.S. Geological Survey and the University of Missouri-Rolla currently (1990) is being conducted on a 3.05 meters in diameter vertically rotating flume used to simulate mudflows under steady-state conditions. Observed mudflow simulations indicate flow patterns in the flume are similar to those occurring in natural mudflows. Variables such as mean and surface velocity, depth, and average boundary shear stress can be measured in this flume more easily than in the field or in a traditional tilting flume. Sensitive variables such as sediment concentration, grain-size distribution, and Atterberg limits also can be precisely and easily controlled. A known Newtonian fluid, SAE 30 motor oil, was tested in the flume and the computed value for viscosity was within 12.5 percent of the stated viscosity. This provided support that the data from the flume can be used to determine the rheological properties of fluids such as mud. Measurements on mud slurries indicate that flows with sediment concentrations ranging from 81 to 87 percent sediment by weight can be approximated as Bingham plastic for strain rates greater than 1 per second. In this approximation, the yield stress and Bingham viscosity were extremely sensitive to sediment concentration. Generally, the magnitude of the yield stress was large relative to the change in shear stress with increasing mudflow velocity.

  3. The vertical oscillations of coupled magnets

    Energy Technology Data Exchange (ETDEWEB)

    Li Kewei; Lin Jiahuang; Kang Zi Yang [Raffles Institution, 1 Raffles Institution Lane, Singapore 575954 (Singapore); Liang, Samuel Yee Wei [Anglo-Chinese School Independent, 121 Dover Road, Singapore 139650 (Singapore); Juan, Jeremias Wong Say, E-mail: likewei92@gmail.com [NUS High School of Mathematics and Science, 20 Clementi Avenue 1, Singapore 129957 (Singapore)

    2011-07-15

    The International Young Physicists' Tournament (IYPT) is a worldwide, annual competition for high school students. This paper is adapted from the winning solution to Problem 14, Magnetic Spring, as presented in the final round of the 23rd IYPT in Vienna, Austria. Two magnets were arranged on top of each other on a common axis. One was fixed, while the other could move vertically. Various parameters of interest were investigated, including the effective gravitational acceleration, the strength, size, mass and geometry of the magnets, and damping of the oscillations. Despite its simplicity, this setup yielded a number of interesting and unexpected relations. The first stage of the investigation was concerned only with the undamped oscillations of small amplitudes, and the period of small amplitude oscillations was found to be dependent only on the eighth root of important magnet properties such as its strength and mass. The second stage sought to investigate more general oscillations. A numerical model which took into account magnet size, magnet geometry and damping effects was developed to model the general oscillations. Air resistance and friction were found to be significant sources of damping, while eddy currents were negligible.

  4. Vertical Distribution of Water at Phoenix

    Science.gov (United States)

    Tamppari, L. K.; Lemmon, M. T.

    2011-01-01

    Phoenix results, combined with coordinated observations from the Mars Reconnaissance Orbiter of the Phoenix lander site, indicate that the water vapor is nonuniform (i.e., not well mixed) up to a calculated cloud condensation level. It is important to understand the mixing profile of water vapor because (a) the assumption of a well-mixed atmosphere up to a cloud condensation level is common in retrievals of column water abundances which are in turn used to understand the seasonal and interannual behavior of water, (b) there is a long history of observations and modeling that conclude both that water vapor is and is not well-mixed, and some studies indicate that the water vapor vertical mixing profile may, in fact, change with season and location, (c) the water vapor in the lowest part of the atmosphere is the reservoir that can exchange with the regolith and higher amounts may have an impact on the surface chemistry, and (d) greater water vapor abundances close to the surface may enhance surface exchange thereby reducing regional transport, which in turn has implications to the net transport of water vapor over seasonal and annual timescales.

  5. Learning styles in vertically integrated teaching.

    Science.gov (United States)

    Brumpton, Kay; Kitchener, Scott; Sweet, Linda

    2013-10-01

    With vertical integration, registrars and medical students attend the same educational workshops. It is not known whether these learners have similar or different learning styles related to their level of education within the medical training schema. This study aims to collect information about learning styles with a view to changing teaching strategies. If a significant difference is demonstrated this will impact on required approaches to teaching. The VARK learning inventory questionnaire was administered to 36 general practice registrars and 20 medical students. The learning styles were compared as individuals and then related to their level of education within the medical training schema. Students had a greater preference for multimodal learning compared with registrars (62.5 per cent versus 33.3 per cent, respectively). More than half of the registrars preferred uni or bimodal learning modalities, compared with one-third of the medical students. The present workshop format based on visual and aural material will not match the learning needs of most learners. This small study has shown that the majority of medical students and registrars could have their learning preferences better met by the addition of written material to the workshop series. Surprisingly, a significantly larger number of medical students than registrars appeared to be broadly multimodal in their learning style, and this warrants further research. © 2013 John Wiley & Sons Ltd.

  6. Microfluidic dielectrophoretic sorter using gel vertical electrodes

    Science.gov (United States)

    Luo, Jason; Nelson, Edward L.; Li, G. P.; Bachman, Mark

    2014-01-01

    We report the development and results of a two-step method for sorting cells and small particles in a microfluidic device. This approach uses a single microfluidic channel that has (1) a microfabricated sieve which efficiently focuses particles into a thin stream, followed by (2) a dielectrophoresis (DEP) section consisting of electrodes along the channel walls for efficient continuous sorting based on dielectric properties of the particles. For our demonstration, the device was constructed of polydimethylsiloxane, bonded to a glass surface, and conductive agarose gel electrodes. Gold traces were used to make electrical connections to the conductive gel. The device had several novel features that aided performance of the sorting. These included a sieving structure that performed continuous displacement of particles into a single stream within the microfluidic channel (improving the performance of downstream DEP, and avoiding the need for additional focusing flow inlets), and DEP electrodes that were the full height of the microfluidic walls (“vertical electrodes”), allowing for improved formation and control of electric field gradients in the microfluidic device. The device was used to sort polymer particles and HeLa cells, demonstrating that this unique combination provides improved capability for continuous DEP sorting of particles in a microfluidic device. PMID:24926390

  7. Morpheus Vertical Test Bed Flight Testing

    Science.gov (United States)

    Hart, Jeremy; Devolites, Jennifer

    2014-01-01

    NASA's Morpheus Project has developed and tested a prototype planetary lander capable of vertical takeoff and landing, that is designed to serve as a testbed for advanced spacecraft technologies. The lander vehicle, propelled by a LOX/Methane engine and sized to carry a 500kg payload to the lunar surface, provides a platform for bringing technologies from the laboratory into an integrated flight system at relatively low cost. Morpheus onboard software is autonomous from ignition all the way through landing, and is designed to be capable of executing a variety of flight trajectories, with onboard fault checks and automatic contingency responses. The Morpheus 1.5A vehicle performed 26 integrated vehicle test flights including hot-fire tests, tethered tests, and two attempted freeflights between April 2011 and August 2012. The final flight of Morpheus 1.5A resulted in a loss of the vehicle. In September 2012, development began on the Morpheus 1.5B vehicle, which subsequently followed a similar test campaign culminating in free-flights at a simulated planetary landscape built at Kennedy Space Center's Shuttle Landing Facility. This paper describes the integrated test campaign, including successes and setbacks, and how the system design for handling faults and failures evolved over the course of the project.

  8. Vertical shear of the galactic interstellar medium

    Directory of Open Access Journals (Sweden)

    Robert A. Benjamin

    2000-01-01

    Full Text Available La detecci on de absorci on en UV, 21 cm, H y otras l neas difusas de emisi on en el optico de gas de hasta 10 kpc sobre el plano de la V a L actea y de otras galaxias, permite estudiar la rotaci on de las \\atm osferas" ionizadas de las galaxias. Esta rotaci on tiene implicaciones al entendimiento del potencial gravitacional Gal actico, al transporte del momento angular del disco y al mantenimiento del di- namo Gal actico. Las evidencias indican que el gas rota de forma casi cil ndrica hasta varios kiloparsecs. Esto va en contra de la idea de que, suponiendo un mod- elo de masa razonable para la Galaxia, deb a de haber un gradiente de rotaci on pronunciado como funci on de la altura sobre el plano. Por ejemplo, en el corte vertical a un radio galactoc entrico de R = 5 kpc en NGC 891 hecho por Rand, la velocidad de rotaci on baja 30 km s de z = 1 a 5 kpc y deb a bajar unos 80 km s La tensi on magn etica puede resolver la discrepancia y se examinar an otras posibilidades en el futuro.

  9. Stability enhancement of ozone-assisted laminar premixed Bunsen flames in nitrogen co-flow

    KAUST Repository

    Vu, Tran Manh

    2014-04-01

    Ozone (O3) is known as one of the strongest oxidizers and therefore is widely used in many applications. Typically in the combustion field, a combination of non-thermal plasma and combustion systems have been studied focusing on the effects of ozone on flame propagation speeds and ignition characteristics. Here, we experimentally investigated the effects of ozone on blowoff of premixed methane/air and propane/air flames over a full range of equivalence ratios at room temperature and atmospheric pressure by using a co-flow burner and a dielectric barrier discharge. The results with ozone showed that a nozzle exit jet velocity at the moment of flame blowoff (blowoff velocity) significantly increased, and flammability limits for both fuel-lean and rich mixtures were also extended. Ozone had stronger effects of percent enhancement in the blowoff velocity for off-stoichiometric mixtures, while minimum enhancements could be observed around stoichiometric conditions for both fuels showing linear positive dependence on a tested range of ozone concentration up to 3810ppm. Through chemical kinetic simulations, the experimentally observed trends of the enhancement in blowoff velocity were identified as a result of the modification of the laminar burning velocity. Two ozone decomposition pathways of O3+N2→O+O2+N2 and O3+H→O2+OH were identified as the most controlling steps. These reactions, coupled with fuel consumption characteristics of each fuel determined the degree of promotion in laminar burning velocities, supporting experimental observations on blowoff velocities with ozone addition. © 2013 The Combustion Institute.

  10. Geoneutrinos and heat production in the Earth: constraints and implications (Robert Wilhelm Bunsen Medal Lecture)

    Science.gov (United States)

    McDonough, W.

    2012-04-01

    The KamLAND and Borexino electron antineutrino (geoneutrino) counting experiments demonstrate that heat derived from the decay of Th and U contributes only about 40% (20±9 TW) of the Earth's total present-day power (46±3 TW) [we consider here only Th and U, since they produce the only detectable geoneutrinos]. Compositional models of the Earth based on geochemical and cosmochemical observations predict that the bulk silicate Earth has 8.2 x 1016 kg of U, Th/U of 3.9 and K/U of 1.4 x 104, with none of these heat producing elements in the metallic core, due to their pronounced chemical affinities for silicates and oxides. Consequently, these particle physics experiments are now establishing limits on acceptable compositional models for the Earth. Soon we will be able to distinguish between different models of the amount of planetary nuclear power inside the Earth, the power driving plate tectonics, the geodynamo and compositional models for the Earth's accretion.

  11. Making and stabilising the deep roots of continents (Robert Wilhelm Bunsen Medal Lecture)

    Science.gov (United States)

    Pearson, D. Graham

    2017-04-01

    Despite the undisputed life-preserving role played by deep cratonic keels in the survival of Earth's oldest continental crust, considerable debate revolves around the origin and age of these deep, rheologically stiff mantle roots. Increasing sharpness in the view afforded by geophysics and geochemistry has revealed the complexity of cratonic roots, which in turn requires a diversity of origins. This contribution examines the setting and timing of initial melt depletion in cratonic peridotites and the possible role played by lateral collision and shortening in craton formation. Bulk rock compositional relations in cratonic peridotites are blurred by a variety of metasomatic processes. Examination of the most depleted, least re-enriched samples using Ca-Al and Cr-Al relations indicates the action of relatively shallow ( 5 GPa and less) melt depletion, a result consistent with mildly incompatible trace elements. These compositions are most like peridotites produced in modern-day subduction settings. Other peridotite xenoliths show variations in compatible and mildly incompatible trace elements far outside the spectrum that is possible to produce by melt depletion alone. These compositions are likely produced by cumulate-processes in the hot Archean crust. Other compositions may represent the residues of much higher pressures of melting. Hence it is likely that cratonic keels are an amalgamation of peridotites produced in different ways, at different times, making it easier to reconcile their complex age and compositional spectra. How are such roots thickened and consolidated? Geodynamical modeling of viscous refractory peridotites illustrate the possibility of creating deep highly depleted mantle keels with optimal stability at circa 200 to 250 km thickness - the typical thickness of cratonic mantle lithosphere observed for the past billion years - by compressional thickening. This scenario is also a mechanism for i) incorporating highly refractory ultramafic rocks that may have been produced as shallow-level cumulates in the Eoarchean into the mantle root and ii) generating the often extensive thick ultra-depleted zones in cratonic keels, with the more fertile, less strong section removed by thermomechanical erosion. Such a model produces cratonic keels comprising peridotites of multiple origins, of various ages, widely varying in composition, juxtaposed in potentially complex ways - all features observed in cratonic mantle roots.

  12. Verification of the Naval Oceanic Vertical Aerosol Model During Fire

    NARCIS (Netherlands)

    Davidson, K.L.; Leeuw, G. de; Gathman, S.G.; Jensen, D.R.

    1990-01-01

    The Naval Oceanic Vertical Aerosol Model (NOVAM) has been formulated to estimate the vertical structure of the optical and infrared extinction coefficients in the marine atmospheric boundary layer (MABL), for waverengths between 0,2 and 40 um. NOVAM was designed to predict, utilizing a set of routin

  13. The Naval Ocean Vertical Aerosol Model : Progress Report

    NARCIS (Netherlands)

    Leeuw, G. de; Gathman, S.G.; Davidson, K.L.; Jensen, D.R.

    1990-01-01

    The Naval Oceanic Vertical Aerosol Model (NOVAM) has been formulated to estimate the vertical structure of the optical and infrared extinction coefficients in the marine atmospheric boundary layer (MABL). NOVAM was designed to predict the non-uniform and non-logarithmic extinction profiles which are

  14. Vertically Integrated Thermo-Optic Waveguide Switch Using Optical Polymers

    Institute of Scientific and Technical Information of China (English)

    Ki-Hong; Kim; Sang-Yung; Shin; Doo-Sun; Choi

    2003-01-01

    We propose and fabricate a vertically integrated thermo-optic waveguide switch. It controls the optical path between two vertically stacked waveguides using the thermo-optic effect of optical polymer. The measured crosstalk is less than -10 dB.

  15. Vertically Integrated Thermo-Optic Waveguide Switch Using Optical Polymers

    Institute of Scientific and Technical Information of China (English)

    Ki-Hong Kim; Sang-Yung Shin; Doo-Sun Choi

    2003-01-01

    We propose and fabricate a vertically integrated thermo-optic waveguide switch. It controls the optical path between two vertically stacked waveguides using the thermo-optic effect of optical polymer. The measured crosstalk is less than-10 dB.

  16. A Buried Vertical Filter for Micro and Nanoparticle Filtration

    NARCIS (Netherlands)

    Li, S.J.; Shen, C.; Sarro, P.M.

    2011-01-01

    This paper presents a silicon micromachined filter for micro- and nanoparticles. The filter is vertical and completely buried beneath the surface. The buried aspect allows additional features to be integrated above the filter, while the vertical aspect allows the creation of highly uniform pores and

  17. First plasma operation of the enhanced JET vertical stabilisation system

    NARCIS (Netherlands)

    Rimini, F. G.; Crisanti, F.; Albanese, R.; Ambrosino, G.; Ariola, M.; Artaserse, G.; Bellizio, T.; Coccorese, V.; De Tommasi, G.; P. de Vries,; Lomas, P. J.; Maviglia, F.; Neto, A.; Nunes, I.; Pironti, A.; Ramogida, G.; Sartori, F.; Shaw, S. R.; Tsalas, M.; Vitelli, R.; Zabeo, L.

    2011-01-01

    A project dedicated to the enhancement of the JET vertical stabilization system was launched in 2006, including an upgrade of the Power Supply of the Radial Field Amplifier, of hardware and software of the vertical stabilization control system. The main aim was to double the JET capability in stabil

  18. Vertically Conductive MoS2 Spiral Pyramid.

    Science.gov (United States)

    Ly, Thuc Hue; Zhao, Jiong; Kim, Hyun; Han, Gang Hee; Nam, Honggi; Lee, Young Hee

    2016-09-01

    MoS2 spirals grown by the chemical vapor deposition method, driven by a threading dislocation, has a peculiar rhombohedral-like structure. This threading dislocation can carry helical current in the vertical direction and greatly enhances the vertical conductance in the MoS2 multilayer samples.

  19. Wind rotor with vertical axis. Vindrotor med vertikal axel

    Energy Technology Data Exchange (ETDEWEB)

    Colling, J.; Sjoenell, B.

    1987-06-15

    This rotor is of dual type i.e. a paddle wheel shaped rotor close to the vertical axis and a second rotor consisting of vertical blades with wing profile and attached to radial spokes which are fixed to the axis together with the paddle wheel rotor. (L.F.).

  20. Ratio between vertical and horizontal mandibular range of motion

    NARCIS (Netherlands)

    Dijkstra, P.U.; Kropmans, T.J.B.; Stegenga, B; de Bont, L.G.M.

    1998-01-01

    Mandibular range of motion (ROM), vertical and horizontal, is often measured as a part of a diagnostic assessment of temporomandibular joint disorders. Ln the literature, a fixed ratio between the vertical and the horizontal ROM has been suggested, i.e. 4:1. The ratio is frequently used to predict t

  1. Estimation of spinal loading in vertical vibrations by numerical simulation

    NARCIS (Netherlands)

    Verver, M.M.; Hoof, J.F.A.M. van; Oomens, C.W.J.; Wouw, N. van de; Wismans, J.S.H.M.

    2003-01-01

    Objective. This paper describes the prediction of spinal forces in car occupants during vertical vibrations using a numerical multi-body occupant model. Background. An increasing part of the population is exposed to whole body vibrations in vehicles. In literature, vertical vibrations and low back p

  2. The vertical birthing position of the Trobrianders, Papua New Guinea.

    Science.gov (United States)

    Pöschl, U

    1987-05-01

    During an ethnomedical field study the author succeeded in participating and photographing 4 traditional birthgivings among the Trobrianders/Papua New Guinea. Their various vertical postures are described with special reference to specific Trobriand practices and discussed by literature review. The results suggest that vertical birthing positions are advantageous to horizontal ones and should be reconsidered by modern Western obstetrics.

  3. CREATING EFFECTIVE MODELS OF VERTICAL INTEGRATED STRUCTURES IN UKRAINE

    Directory of Open Access Journals (Sweden)

    D. V. Koliesnikov

    2011-01-01

    Full Text Available The results of scientific research aimed at development of methodology-theoretical mechanisms of building the effective models of vertically-integrated structures are presented. A presence of vertically-integrated structures on natural-monopolistic markets at private and governmental sectors of economy and priority directions of integration are given.

  4. Buried injector logic, a vertical IIL using deep ion implantation

    NARCIS (Netherlands)

    Mouthaan, A.J.

    1987-01-01

    A vertically integrated alternative for integrated injection logic has been realized, named buried injector logic (BIL). 1 MeV ion implantations are used to create buried layers. The vertical pnp and npn transistors have thin base regions and exhibit a limited charge accumulation if a gate is satura

  5. SOMPROF: A vertically explicit soil organic matter model

    NARCIS (Netherlands)

    Braakhekke, M.C.; Beer, M.; Hoosbeek, M.R.; Kruijt, B.; Kabat, P.

    2011-01-01

    Most current soil organic matter (SOM) models represent the soil as a bulk without specification of the vertical distribution of SOM in the soil profile. However, the vertical SOM profile may be of great importance for soil carbon cycling, both on short (hours to years) time scale, due to

  6. Functionalized vertical InAs nanowire arrays for gas sensing

    NARCIS (Netherlands)

    Offermans, P.; Crego-Calama, M.; Brongersma, S.H.

    2012-01-01

    Vertical InAs nanowires are contacted in situ using an air-bridge construction and functionalized with a metalloporphyrin (Hemin). The response of bare and functionalized vertical InAs nanowire arrays to ppb-level concentrations of NO2 and NO is demonstrated. Hemin enhances the response to NO

  7. Vertical footbridge vibrations: Towards an improved and codifiable response evaluation

    DEFF Research Database (Denmark)

    Ingólfsson, Einar Thór; Georgakis, Christos; Jönsson, Jeppe

    2007-01-01

    An improved and codifiable footbridge response evaluation is presented herewith, in which peak vertical accelerations are provided as a function of load return period in the form of response spectra. To achieve this, a series of Monte Carlo simulations are employed to generate vertical loads...

  8. Finding people, papers, and posts: Vertical search algorithms and evaluation

    NARCIS (Netherlands)

    Berendsen, R.W.

    2015-01-01

    There is a growing diversity of information access applications. While general web search has been dominant in the past few decades, a wide variety of so-called vertical search tasks and applications have come to the fore. Vertical search is an often used term for search that targets specific conten

  9. Finding people, papers, and posts: Vertical search algorithms and evaluation

    NARCIS (Netherlands)

    Berendsen, R.W.

    2015-01-01

    There is a growing diversity of information access applications. While general web search has been dominant in the past few decades, a wide variety of so-called vertical search tasks and applications have come to the fore. Vertical search is an often used term for search that targets specific

  10. Vertical Heterophoria and Susceptibility to Visually-induced Motion Sickness

    Science.gov (United States)

    Jackson, Danielle N.; Bedell, Harold E.

    2013-01-01

    Motion sickness is reported to be a common symptom in patients with vertical heterophoria. The goal of this study was to assess the relationship between vertical phoria and susceptibility to motion sickness in a non-clinical sample of 43 subjects. Vertical phoria was measured with a Maddox rod after 30 s of occlusion. To evaluate susceptibility to motion sickness, subjects read text while sitting inside a rotating optokinetic drum for 10 min. Subjects rated their level of motion sickness at 1 min intervals during drum rotation and the magnitude of 13 motion-sickness symptoms after drum rotation ended. The magnitude of vertical phoria ranged from 0 to 2.13 prism diopters (pd) with a mean of 0.46 pd and correlated significantly with both the maximum rating of motion sickness during drum rotation and the summed symptom score following rotation. A vertical phoria of 0.75 pd discriminated best between subjects with low vs. high summed motion-sickness-symptom scores (p vertical phorias vertical phorias > 0.75 pd reduced motion-sickness symptoms in 2 of the 4 subjects tested. The results confirm an association between vertical phoria and motion sickness, but suggest the relationship may not be causal. PMID:22390327

  11. Estimation of spinal loading in vertical vibrations by numerical simulation

    NARCIS (Netherlands)

    Verver, M.M.; Hoof, J.F.A.M. van; Oomens, C.W.J.; Wouw, N. van de; Wismans, J.S.H.M.

    2003-01-01

    Objective. This paper describes the prediction of spinal forces in car occupants during vertical vibrations using a numerical multi-body occupant model. Background. An increasing part of the population is exposed to whole body vibrations in vehicles. In literature, vertical vibrations and low back

  12. Steerable vertical to horizontal energy transducer for mobile robots

    Science.gov (United States)

    Spletzer, Barry L.; Fischer, Gary J.; Feddema, John T.

    2001-01-01

    The present invention provides a steerable vertical to horizontal energy transducer for mobile robots that less complex and requires less power than two degree of freedom tilt mechanisms. The present invention comprises an end effector that, when mounted with a hopping actuator, translates along axis (typically vertical) actuation into combined vertical and horizontal motion. The end effector, or foot, mounts with an end of the actuator that moves toward the support surface (typically a floor or the earth). The foot is shaped so that the first contact with the support surface is off the axis of the actuator. Off-axis contact with the support surface generates an on-axis force (typically resulting in vertical motion) and a moment orthogonal to the axis. The moment initiates a horizontal tumbling motion, and tilts the actuator so that its axis is oriented with a horizontal component and continued actuation generates both vertical and horizontal force.

  13. Theoretic base of Edge Local Mode triggering by vertical displacements

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Z. T. [Southwestern Institute of Physics, Chengdu 610041 (China); College of Physics Science and Technology, Sichuan University, Chengdu 610065 (China); He, Z. X.; Wang, Z. H. [Southwestern Institute of Physics, Chengdu 610041 (China); Wu, N.; Tang, C. J. [College of Physics Science and Technology, Sichuan University, Chengdu 610065 (China)

    2015-05-15

    Vertical instability is studied with R-dependent displacement. For Solovev's configuration, the stability boundary of the vertical instability is calculated. The pressure gradient is a destabilizing factor which is contrary to Rebhan's result. Equilibrium parallel current density, j{sub //}, at plasma boundary is a drive of the vertical instability similar to Peeling-ballooning modes; however, the vertical instability cannot be stabilized by the magnetic shear which tends towards infinity near the separatrix. The induced current observed in the Edge Local Mode (ELM) triggering experiment by vertical modulation is derived. The theory provides some theoretic explanation for the mitigation of type-I ELMS on ASDEX Upgrade. The principle could be also used for ITER.

  14. Doppler Lidar Vertical Velocity Statistics Value-Added Product

    Energy Technology Data Exchange (ETDEWEB)

    Newsom, R. K. [DOE ARM Climate Research Facility, Washington, DC (United States); Sivaraman, C. [DOE ARM Climate Research Facility, Washington, DC (United States); Shippert, T. R. [DOE ARM Climate Research Facility, Washington, DC (United States); Riihimaki, L. D. [DOE ARM Climate Research Facility, Washington, DC (United States)

    2015-07-01

    Accurate height-resolved measurements of higher-order statistical moments of vertical velocity fluctuations are crucial for improved understanding of turbulent mixing and diffusion, convective initiation, and cloud life cycles. The Atmospheric Radiation Measurement (ARM) Climate Research Facility operates coherent Doppler lidar systems at several sites around the globe. These instruments provide measurements of clear-air vertical velocity profiles in the lower troposphere with a nominal temporal resolution of 1 sec and height resolution of 30 m. The purpose of the Doppler lidar vertical velocity statistics (DLWSTATS) value-added product (VAP) is to produce height- and time-resolved estimates of vertical velocity variance, skewness, and kurtosis from these raw measurements. The VAP also produces estimates of cloud properties, including cloud-base height (CBH), cloud frequency, cloud-base vertical velocity, and cloud-base updraft fraction.

  15. HYDRAULIC CHARACTERISTICS OF VERTICAL VORTEX AT HYDRAULIC INTAKES

    Institute of Scientific and Technical Information of China (English)

    CHEN Yun-liang; WU Chao; YE Mao; JU Xiao-ming

    2007-01-01

    The trace of vertical vortex flow at hydraulic intakes is of the shape of spiral lines, which was observed in the presented experiments with the tracer technique. It represents the fluid particles flow spirally from the water surface to the underwater and rotate around the vortex-axis multi-cycle. This process is similar to the movement of screw. To describe the multi-circle spiral characteristics under the axisymmetric condition, the vertical vortex would change not only in the radial direction but also in the axial direction. The improved formulae for three velocity components for the vertical vortex flow were deduced by using the method of separation of variables in this article. In the improved formulae, the velocity components are the functions of the radial and axial coordinates, so the multi-circle spiral flow of vertical vortex could be simulated. The calculated and measured results for the vertical vortex flow were compared and the causes of errors were analyzed.

  16. Vertical Transport of Subwavelength Localized Surface Electromagnetic Modes

    CERN Document Server

    Gao, Fei; Zhang, Youming; Shi, Xihang; Yang, Zhaoju; Zhang, Baile

    2015-01-01

    Transport of subwavelength electromagnetic (EM) energy has been achieved through near-field coupling of highly confined surface EM modes supported by plasmonic nanoparticles, in a configuration usually staying on a two-dimensional (2D) substrate. Vertical transport of similar modes along the third dimension, on the other hand, can bring more flexibility in designs of functional photonic devices, but this phenomenon has not been observed in reality. In this paper, designer (or spoof) surface plasmon resonators (plasmonic meta-atoms) are stacked in the direction vertical to their individual planes in demonstrating vertical transport of subwavelength localized surface EM modes. Dispersion relation of this vertical transport is determined from coupled mode theory and is verified with near-field transmission spectrum and field mapping with a microwave near-field scanning stage. This work extends the near-field coupled resonator optical waveguide (CROW) theory into the vertical direction, and may find applications ...

  17. Impact of Vertical Wind Shear on Tropical Cyclone Rainfall

    Science.gov (United States)

    Cecil, Dan; Marchok, Tim

    2014-01-01

    While tropical cyclone rainfall has a large axisymmetric component, previous observational and theoretical studies have shown that environmental vertical wind shear leads to an asymmetric component of the vertical motion and precipitation fields. Composites consistently depict a precipitation enhancement downshear and also cyclonically downwind from the downshear direction. For consistence with much of the literature and with Northern Hemisphere observations, this is subsequently referred to as "Downshear-Left". Stronger shear magnitudes are associated with greater amplitude precipitation asymmetries. Recent work has reinforced the prior findings, and explored details of the response of the precipitation and kinematic fields to environmental vertical wind shear. Much of this research has focused on tropical cyclones away from land, to limit the influence of other processes that might distort the signal related to vertical wind shear. Recent evidence does suggest vertical wind shear can also play a major role in precipitation asymmetries during and after landfall.

  18. Vertical partitioning of relational OLTP databases using integer programming

    DEFF Research Database (Denmark)

    Amossen, Rasmus Resen

    2010-01-01

    A way to optimize performance of relational row store databases is to reduce the row widths by vertically partition- ing tables into table fractions in order to minimize the number of irrelevant columns/attributes read by each transaction. This pa- per considers vertical partitioning algorithms...... for relational row- store OLTP databases with an H-store-like architecture, meaning that we would like to maximize the number of single-sited transactions. We present a model for the vertical partitioning problem that, given a schema together with a vertical partitioning and a workload, estimates the costs...... (bytes read/written by storage layer access methods and bytes transferred between sites) of evaluating the workload on the given partitioning. The cost model allows for arbitrarily prioritizing load balancing of sites vs. total cost minimization. We show that finding a minimum-cost vertical partitioning...

  19. Graphene vertical hot-electron terahertz detectors

    Energy Technology Data Exchange (ETDEWEB)

    Ryzhii, V., E-mail: v-ryzhii@riec.tohoku.ac.jp [Research Institute for Electrical Communication, Tohoku University, Sendai 980-8577 (Japan); Center for Photonics and Infrared Engineering, Bauman Moscow State Technical University and Institute of Ultra High Frequency Semiconductor Electronics, Russian Academy of Sciences, Moscow 111005 (Russian Federation); Satou, A.; Otsuji, T. [Research Institute for Electrical Communication, Tohoku University, Sendai 980-8577 (Japan); Ryzhii, M. [Department of Computer Science and Engineering, University of Aizu, Aizu-Wakamatsu 965-8580 (Japan); Mitin, V. [Department of Electrical Engineering, University at Buffalo, Buffalo, New York 1460-1920 (United States); Shur, M. S. [Departments of Electrical, Electronics, and Systems Engineering and Physics, Applied Physics, and Astronomy, Rensselaer Polytechnic Institute, Troy, New York 12180 (United States)

    2014-09-21

    We propose and analyze the concept of the vertical hot-electron terahertz (THz) graphene-layer detectors (GLDs) based on the double-GL and multiple-GL structures with the barrier layers made of materials with a moderate conduction band off-set (such as tungsten disulfide and related materials). The operation of these detectors is enabled by the thermionic emissions from the GLs enhanced by the electrons heated by incoming THz radiation. Hence, these detectors are the hot-electron bolometric detectors. The electron heating is primarily associated with the intraband absorption (the Drude absorption). In the frame of the developed model, we calculate the responsivity and detectivity as functions of the photon energy, GL doping, and the applied voltage for the GLDs with different number of GLs. The detectors based on the cascade multiple-GL structures can exhibit a substantial photoelectric gain resulting in the elevated responsivity and detectivity. The advantages of the THz detectors under consideration are associated with their high sensitivity to the normal incident radiation and efficient operation at room temperature at the low end of the THz frequency range. Such GLDs with a metal grating, supporting the excitation of plasma oscillations in the GL-structures by the incident THz radiation, can exhibit a strong resonant response at the frequencies of several THz (in the range, where the operation of the conventional detectors based on A{sub 3}B{sub 5} materials, in particular, THz quantum-well detectors, is hindered due to a strong optical phonon radiation absorption in such materials). We also evaluate the characteristics of GLDs in the mid- and far-infrared ranges where the electron heating is due to the interband absorption in GLs.

  20. Multicloud convective parametrizations with crude vertical structure

    Energy Technology Data Exchange (ETDEWEB)

    Khouider, Boualem [University of Victoria, Mathematics and Statistics, PO BOX 3045 STN CSC, Victoria, BC (Canada); Majda, Andrew J. [New York University, Department of Mathematics and Center for Atmosphere/Ocean Sciences, Courant Institute, New York, NY (United States)

    2006-11-15

    Recent observational analysis reveals the central role of three multi-cloud types, congestus, stratiform, and deep convective cumulus clouds, in the dynamics of large scale convectively coupled Kelvin waves, westward propagating two-day waves, and the Madden-Julian oscillation. The authors have recently developed a systematic model convective parametrization highlighting the dynamic role of the three cloud types through two baroclinic modes of vertical structure: a deep convective heating mode and a second mode with low level heating and cooling corresponding respectively to congestus and stratiform clouds. The model includes a systematic moisture equation where the lower troposphere moisture increases through detrainment of shallow cumulus clouds, evaporation of stratiform rain, and moisture convergence and decreases through deep convective precipitation and a nonlinear switch which favors either deep or congestus convection depending on whether the troposphere is moist or dry. Here several new facets of these multi-cloud models are discussed including all the relevant time scales in the models and the links with simpler parametrizations involving only a single baroclinic mode in various limiting regimes. One of the new phenomena in the multi-cloud models is the existence of suitable unstable radiative convective equilibria (RCE) involving a larger fraction of congestus clouds and a smaller fraction of deep convective clouds. Novel aspects of the linear and nonlinear stability of such unstable RCE's are studied here. They include new modes of linear instability including mesoscale second baroclinic moist gravity waves, slow moving mesoscale modes resembling squall lines, and large scale standing modes. The nonlinear instability of unstable RCE's to homogeneous perturbations is studied with three different types of nonlinear dynamics occurring which involve adjustment to a steady deep convective RCE, periodic oscillation, and even heteroclinic chaos in

  1. Coastal influence on vertical pollutant partitioning

    Science.gov (United States)

    Peake, D.

    Coastal outflow describes the horizontal ventilation of pollutants from the continental boundary layer (CBL) by advection above the shallower marine boundary layer. Passive tracers incorporated in the Met Office Unified Model (MetUM) are used to simulate coastal outflow over the eastern United States for the summer of 2004. The results are interpreted with a simple box-model containing a diurnally varying CBL height and uniform wind flow. Ventilation by coastal outflow from the US occurs at the same magnitude as vertical ventilation into the free troposphere for the eastern half of the US. The diurnal variability in coastal outflow is determined by the lifetime of the tracer and the cycle of CBL height. Over the diurnal cycle, pollutants with lifetimes less than 24 hours experience a maximum in the evening and a minimum in the mid-morning. Pollutants with lifetimes greater than 24 hours undergo continuous coastal outflow with little diurnal variability. The dominant parameters in this study are tracer lifetime α, wind-speed U and width of emissions (i.e. land) L. The box-model indicates the presence of a critical threshold, αU/L ≈ 10, above which increasing the cross-coastal wind speed decreases coastal out-flow by reducing the availability of tracer in the residual layer to undergo coastal outflow at night. Of tracer advected across the coast in the MetUM simulation, 65% and 67% of tracer with 3- and 24-hour lifetimes undergo coastal outflow respectively. For the 24-hour tracer, the box-model has the highest correlation with the MetUM simulation when the advection rate U/L≈ 2 x 10-5s-1. Given the observed wind speed the distance near the coast over which emissions significantly contribute to coastal outflow is ≈ 100-110km.

  2. A Vertical Differential Configuration in GPR prospecting

    Science.gov (United States)

    Persico, Raffaele; Pochanin, Gennadiy; Varianytsia-Roshchupkina, Liudmyla; Catapano, Ilaria; Gennarelli, Gianluca; Soldovieri, Francesco

    2015-04-01

    small objects and interfaces. This configuration can be labeled as a vertical differential configuration. At the conference, the reconstruction capabilities of this differential GPR configuration system will be discussed by means of an analysis of the problem based on a properly designed microwave tomographic inversion approach. The proposed approach exploits the Born approximation and faces the imaging as the solution of a linear inverse scattering problem. In this way, the problem of the local minima is avoided [7] and it is possible to impose some regularization to the problem in an easy way problem [8-9]. At the conference, a theoretical analysis of the mathematical propserties of the scattering operator under the vertical differential configuration will be presented showing that, with respect to the horizontal differential configuration, the vertical one allows to reject the direct coupling between the antennas but not the coupling of the antennas occurring through the air-soil interface. On the other hand, the filtering properties of the operator at hand con be considered, let say, less severe in some cases. At the conference, both some numerical and experimental results will be shown. References [1] R. Persico, F. Soldovieri, "Effects of the background removal in linear inverse scattering", IEEE Trans. Geosci. Remote Sens, vol. 46, pp. 1104-1114, April 2008. [2] L. Gurel, U. Oguz, "Three-Dimensional FDTD modeling of a ground penetrating radar", IEEE Trans. Geosci. Remote Sens, vol. 38, pp. 1513-1521, July 2000. [3] L. Gurel, U. Oguz, "Optimization of the transmitter-receiver separation in the ground penetrating radar", IEEE Trans. Antennas and Propag., vol. 51, no 3, pp. 362-370, March 2003. [4] R. Persico, F. Soldovieri, "A microwave tomography approach for a differential configuration in GPR prospecting", IEEE Trans. Antennas and Propag., vol. 54, pp. 3541 - 3548, 2006. [5] Y.A. Kopylov, S.A. Masalov, G.P. Pochanin, "The way of isolation between transmitting

  3. The Subjective Visual Vertical and the Subjective Haptic Vertical Access Different Gravity Estimates.

    Directory of Open Access Journals (Sweden)

    Lindsey E Fraser

    Full Text Available The subjective visual vertical (SVV and the subjective haptic vertical (SHV both claim to probe the underlying perception of gravity. However, when the body is roll tilted these two measures evoke different patterns of errors with SVV generally becoming biased towards the body (A-effect, named for its discoverer, Hermann Rudolph Aubert and SHV remaining accurate or becoming biased away from the body (E-effect, short for Entgegengesetzt-effect, meaning "opposite", i.e., opposite to the A-effect. We compared the two methods in a series of five experiments and provide evidence that the two measures access two different but related estimates of gravitational vertical. Experiment 1 compared SVV and SHV across three levels of whole-body tilt and found that SVV showed an A-effect at larger tilts while SHV was accurate. Experiment 2 found that tilting either the head or the trunk independently produced an A-effect in SVV while SHV remained accurate when the head was tilted on an upright body but showed an A-effect when the body was tilted below an upright head. Experiment 3 repeated these head/body configurations in the presence of vestibular noise induced by using disruptive galvanic vestibular stimulation (dGVS. dGVS abolished both SVV and SHV A-effects while evoking a massive E-effect in the SHV head tilt condition. Experiments 4 and 5 show that SVV and SHV do not combine in an optimally statistical fashion, but when vibration is applied to the dorsal neck muscles, integration becomes optimal. Overall our results suggest that SVV and SHV access distinct underlying gravity percepts based primarily on head and body position information respectively, consistent with a model proposed by Clemens and colleagues.

  4. Metrics of hurricane-ocean interaction: vertically-integrated or vertically-averaged ocean temperature?

    Directory of Open Access Journals (Sweden)

    J. F. Price

    2009-05-01

    Full Text Available The ocean thermal field is often represented in hurricane-ocean interaction by a metric termed the upper Ocean Heat Content (OHC, the vertical integral of ocean temperature in excess of 26°C. High values of OHC have proven useful for identifying ocean regions that are especially favorable for hurricane intensification. Nevertheless, it is argued here that a more direct and robust metric of the ocean thermal field may be afforded by a vertical average of temperature, in one version from the surface to 100 m, a typical depth of vertical mixing by a mature hurricane. OHC and the depth-averaged temperature, dubbed T100, are well correlated over the deep open ocean in the high range of OHC, OHC≥75 kJ cm−2. They are poorly correlated in the low range of OHC, ≤50 kJ cm−2, in part because OHC is degenerate when evaluated on cool ocean temperatures ≤26°C. OHC and T100 can be qualitatively different also over shallow continental shelves: OHC will generally indicate comparatively low values regardless of the ocean temperature, while T100 will take on high values over a shelf that is warm and upwelling neutral or negative, since there will be little cool water that could be mixed into the surface layer. Some limited evidence is that continental shelves may be regions of comparatively small sea surface cooling during a hurricane passage, but more research is clearly required on this important issue.

  5. Final Results from A Pilot Project to Investigate Wake Vortex Patterns and Weather Patterns at the Atlantic City Airport by the Richard Stockton College of NJ and the FAA

    Science.gov (United States)

    Trout, Joseph; Manson, J. Russell; King, David; Decicco, Nicolas; Prince, Alyssa; di Mercurio, Alexis; Rios, Manual

    2017-01-01

    Wake Vortex Turbulence is the turbulence generated by an aircraft in flight. This turbulence is created by vortices at the tips of the wing that may decay slowly and persist for several minutes after creation. These vortices and turbulence are hazardous to other aircraft in the vicinity. The strength, formation and lifetime of the turbulence and vortices are effected by many things including the weather. Here we present the final results of the pilot project to investigation of low level wind fields generated by the Weather Research and Forecasting Model and an analysis of historical data. The findings from the historical data and the data simulations were used as inputs for the computational fluid dynamics model (OpenFoam) to show that the vortices could be simulated using OpenFoam. Presented here are the updated results from a research grant, ``A Pilot Project to Investigate Wake Vortex Patterns and Weather Patterns at the Atlantic City Airport by the Stockton University and the FAA''.

  6. Solid-phase extraction of Mn(II), Co(II), Ni(II), Cu(II), Cd(II) and Pb(II) ions from environmental samples by flame atomic absorption spectrometry (FAAS)

    Energy Technology Data Exchange (ETDEWEB)

    Duran, Celal [Department of Chemistry, Faculty of Art and Science, Karadeniz Technical University, 61080 Trabzon (Turkey); Gundogdu, Ali [Department of Chemistry, Faculty of Art and Science, Karadeniz Technical University, 61080 Trabzon (Turkey); Bulut, Volkan Numan [Department of Chemistry, Giresun Faculty of Art and Science, Karadeniz Technical University, 28049 Giresun (Turkey); Soylak, Mustafa [Department of Chemistry, Faculty of Art and Science, Erciyes University, 38039 Kayseri (Turkey)]. E-mail: soylak@erciyes.edu.tr; Elci, Latif [Department of Chemistry, Faculty of Art and Science, Pamukkale University, 20020 Denizli (Turkey); Sentuerk, Hasan Basri [Department of Chemistry, Faculty of Art and Science, Karadeniz Technical University, 61080 Trabzon (Turkey); Tuefekci, Mehmet [Department of Chemistry, Faculty of Art and Science, Karadeniz Technical University, 61080 Trabzon (Turkey)

    2007-07-19

    A new method using a column packed with Amberlite XAD-2010 resin as a solid-phase extractant has been developed for the multi-element preconcentration of Mn(II), Co(II), Ni(II), Cu(II), Cd(II), and Pb(II) ions based on their complex formation with the sodium diethyldithiocarbamate (Na-DDTC) prior to flame atomic absorption spectrometric (FAAS) determinations. Metal complexes sorbed on the resin were eluted by 1 mol L{sup -1} HNO{sub 3} in acetone. Effects of the analytical conditions over the preconcentration yields of the metal ions, such as pH, quantity of Na-DDTC, eluent type, sample volume and flow rate, foreign ions etc. have been investigated. The limits of detection (LOD) of the analytes were found in the range 0.08-0.26 {mu}g L{sup -1}. The method was validated by analyzing three certified reference materials. The method has been applied for the determination of trace elements in some environmental samples.

  7. Incorporation of vertical permeability test results in vertical miscible flood design and operation. Vol. 83-34-14

    Energy Technology Data Exchange (ETDEWEB)

    Gillund, G.N.; Kamal, M.

    1983-01-01

    The original analysis of the Bigoray Nisku B miscible flood indicated potential coning problems related to the level of vertical permeability. This paper presents the results of a vertical permeability test which were incorporated into a coning study. Additional reservoir data along with the rate information from the coning study will be used to revise the original reservoir simulation prediction and depletion strategy.

  8. Mt. Graham: Optical turbulence vertical distribution at standard and high vertical resolution

    CERN Document Server

    Masciadri, E; Hagelin, S; S.,; Lascaux, F; di Arcetri, INAF - Osservatorio Astrofisico; 10.1117/12.856904

    2010-01-01

    A characterization of the optical turbulence vertical distribution and all the main integrated astroclimatic parameters derived from the CN2 and the wind speed profiles above Mt. Graham is presented. The statistic includes measurements related to 43 nights done with a Generalized Scidar (GS) used in standard configuration with a vertical resolution of ~1 km on the whole 20-22 km and with the new technique (HVR-GS) in the first kilometer. The latter achieves a resolution of ~ 20-30 m in this region of the atmosphere. Measurements done in different periods of the year permit us to provide a seasonal variation analysis of the CN2. A discretized distribution of the typical CN2 profiles useful for the Ground Layer Adaptive Optics (GLAO) simulations is provided and a specific analysis for the LBT Laser Guide Star system ARGOS case is done including the calculation of the 'gray zones' for J, H and K bands. Mt. Graham confirms to be an excellent site with median values of the seeing without dome contribution equal to...

  9. The Vertical Shift between 1985 National Height Datum and Global Vertical Datum

    Directory of Open Access Journals (Sweden)

    HE Lin

    2016-07-01

    Full Text Available The mean geopotential value of the global mean sea surface, 62 636 856.550 7 m2s-2, is determined based on the global gravity model(EIGEN-6C4、EGM2008 and global mean sea surface height model(DNSC08、DTU10、DTU13.The geoidal potential (62 636 858.179 0 m2s-2 can be obtained by subtracting the mean sea surface topography from the mean sea surface height. Then, 649 GPS/leveling data,distributed evenly over the mainland of China,are selected to calculate the 1985 national height datum geopotential and the vertical shift using three methods, combined with the global gravity model EGM2008. The vertical shift value is improved by weighting, and utilizing two methods to verify the rationality and correctness after weighting. The final results demonstrate that the 1985 national height datum is 0.298 0 and 0.464 2 m above the mean sea level and the global geoid, respectively.

  10. Vertical nystagmus: clinical facts and hypotheses.

    Science.gov (United States)

    Pierrot-Deseilligny, C; Milea, D

    2005-06-01

    The pathophysiology of spontaneous upbeat (UBN) and downbeat (DBN) nystagmus is reviewed in the light of several instructive clinical findings and experimental data. UBN due to pontine lesions could result from damage to the ventral tegmental tract (VTT), originating in the superior vestibular nucleus (SVN), coursing through the ventral pons and transmitting excitatory upward vestibular signals to the third nerve nucleus. A VTT lesion probably leads to relative hypoactivity of the drive to the motoneurons of the elevator muscles with, consequently, an imbalance between the downward and upward systems, resulting in a downward slow phase. The results observed in internuclear ophthalmoplegia suggest that the medial longitudinal fasciculus (MLF) is involved in the transmission of both upward and downward vestibular signals. Since no clinical cases of DBN due to focal brainstem damage have been reported, it may be assumed that the transmission of downward vestibular signals depends only upon the MLF, whereas that of upward vestibular signals involves both the MLF and the VTT. The main focal lesions resulting in DBN affect the cerebellar flocculus and/or paraflocculus. Apparently, this structure tonically inhibits the SVN and its excitatory efferent tract (i.e. the VTT) but not the downward vestibular system. Therefore, a floccular lesion could result in a disinhibition of the SVN-VTT pathway with, consequently, relative hyperactivity of the drive to the motoneurons of the elevator muscles, resulting in an upward slow phase. UBN also results from lesions affecting the caudal medulla. An area in this region could form part of a feedback loop involved in upward gaze-holding, originating in a collateral branch of the VTT and comprising the caudal medulla, the flocculus and the SVN, successively. Therefore, it is suggested that the main types of spontaneous vertical nystagmus due to focal central lesions result from a primary dysfunction of the SVN-VTT pathway, which becomes

  11. Sliding response of gravity dams including vertical seismic accelerations

    Institute of Scientific and Technical Information of China (English)

    Constantin Christopoulos; Pierre Léger; André Filiatrault

    2003-01-01

    Seismic safety assessment of gravity dams has become a major concern in many regions of the world while the effects of vertical seismic accelerations on the response of structures remain poorly understood. This paper first investigates the effect of including vertical accelerations in the sliding response analysis of gravity dams subjected to a range of historical ground motion records separated in two groups according to their source-to-site distance. Analyses showed that the incidence of vertical accelerations on the sliding response of gravity dams is significantly higher for near-source records than for farsource records. The pseudo-static 30% load combination rule, commonly used in practice to account for the non-simultaneous occurrence of the peak horizontal and vertical accelerations, yielded good approximations of the minimum safety factors against sliding computed from time-history analyses. A method for empirically estimating the vertical response spectra based on horizontal spectra, accounting for the difference in frequency content and amplitudes between the two components is investigated. Results from analyses using spectrum compatible horizontal and vertical synthetic records also approximated well the sliding response of a gravity dam subjected to series of simultaneous horizontal and vertical historical earthquake records.

  12. Subjective visual vertical and postural capability in children born prematurely.

    Directory of Open Access Journals (Sweden)

    Maria Pia Bucci

    Full Text Available We compared postural stability and subjective visual vertical performance in a group of very preterm-born children aged 3-4 years and in a group of age-matched full-term children.A platform (from TechnoConcept was used to measure postural control in children. Perception of subjective visual vertical was also recorded with posture while the child had to adjust the vertical in the dark or with visual perturbation. Two other conditions (control conditions were also recorded while the child was on the platform: for a fixation of the vertical bar, and in eyes closed condition.Postural performance was poor in preterm-born children compared to that of age-matched full-term children: the surface area, the length in medio-lateral direction and the mean speed of the center of pressure (CoP were significantly larger in the preterm-born children group (p < 0.04, p < 0.01, and p < 0.04, respectively. Dual task in both groups of children significantly affected postural control. The subjective visual vertical (SVV values were more variable and less precise in preterm-born children.We suggest that poor postural control as well as perception of verticality observed in preterm-born children could be due to immaturity of the cortical processes involved in the motor control and in the treatment of perception and orientation of verticality.

  13. Sidewall containment of liquid metal with vertical alternating magnetic fields

    Energy Technology Data Exchange (ETDEWEB)

    Lari, Robert J. (Aurora, IL); Praeg, Walter F. (Palos Park, IL); Turner, Larry R. (Naperville, IL); Battles, James E. (Oak Forest, IL); Hull, John R. (Hinsdale, IL); Rote, Donald M. (Lagrange, IL)

    1990-01-01

    An apparatus for containing molten metal using a magnet producing vertical alternating magnetic field positioned adjacent the area in which the molten metal is to be confined. This invention can be adapted particularly to the casting of metal between counter-rotating rollers with the vertical alternating magnetic field used to confine the molten metal at the edges of the rollers. Alternately, the vertical alternating magnetic field can be used as a flow regulator in casting molten metal from an opening in a channel.

  14. Simulation of EAST vertical displacement events by tokamak simulation code

    Science.gov (United States)

    Qiu, Qinglai; Xiao, Bingjia; Guo, Yong; Liu, Lei; Xing, Zhe; Humphreys, D. A.

    2016-10-01

    Vertical instability is a potentially serious hazard for elongated plasma. In this paper, the tokamak simulation code (TSC) is used to simulate vertical displacement events (VDE) on the experimental advanced superconducting tokamak (EAST). Key parameters from simulations, including plasma current, plasma shape and position, flux contours and magnetic measurements match experimental data well. The growth rates simulated by TSC are in good agreement with TokSys results. In addition to modeling the free drift, an EAST fast vertical control model enables TSC to simulate the course of VDE recovery. The trajectories of the plasma current center and control currents on internal coils (IC) fit experimental data well.

  15. Simulation of Vertical Planetary Mill Based on Virtual Prototyping

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The mechanical model of vertical planetary mill is set up, whose dynamic and kinetic characteristics are described as well. Based on the analysis of system dynamics of vertical planetary mill, virtual prototyping technology is applied in the simulation of this mill. The development of virtual prototype of equipment, virtual test and optimization of virtual prototype are stated in detail. Some useful conclusions which have theoretical meaning for the manufacturing of vertical planetary mill have been obtained. Furthermore, it is pointed out that virtual prototyping technology shows great advantage and is bound to become a main method of developing product in the future.

  16. Solving Simple Stochastic Games with Few Random Vertices

    CERN Document Server

    Gimbert, Hugo

    2007-01-01

    We present a new algorithm for solving Simple Stochastic Games (SSGs). This algorithm is based on an exhaustive search of a special kind of positional optimal strategies, the \\emph{f-strategies}. The running time is O(|Vr| (|V||E|+|p|)), where |V|, |Vr|, |E| and |p| are respectively the number of vertices, random vertices and edges, and the maximum bit-length of a transition probability. Our algorithm improves existing algorithms for solving SSGs in three aspects. First, our algorithm performs well on SSGs with few random vertices, second it does not rely on linear or quadratic programming, third it applies to all SSGs, not only stopping SSGs.

  17. ONLINE MINIMIZATION OF VERTICAL BEAM SIZES AT APS

    Energy Technology Data Exchange (ETDEWEB)

    Sun, Yipeng

    2017-06-25

    In this paper, online minimization of vertical beam sizes along the APS (Advanced Photon Source) storage ring is presented. A genetic algorithm (GA) was developed and employed for the online optimization in the APS storage ring. A total of 59 families of skew quadrupole magnets were employed as knobs to adjust the coupling and the vertical dispersion in the APS storage ring. Starting from initially zero current skew quadrupoles, small vertical beam sizes along the APS storage ring were achieved in a short optimization time of one hour. The optimization results from this method are briefly compared with the one from LOCO (Linear Optics from Closed Orbits) response matrix correction.

  18. A proposed orbit and vertical dispersion correction system for PEP

    Energy Technology Data Exchange (ETDEWEB)

    Close, E.; Cornacchia, M.; King, A.S.; Lee, M.J.

    1978-07-01

    The proposed arrangement of position monitors and dipole magnets for the closed orbit correction system in PEP is described. The computer code ALIGN, which simulates and corrects closed orbit displacements, has been used to study the most effective layout of monitors and correctors. The vertical dispersion function has been computed before and after closed orbit correction. The results indicate that the residual vertical dispersion after the orbit is corrected could exceed the tolerable values. A correction procedure for the vertical dispersion has been studied with the compute code CO-OP and this scheme of correction has been verified experimentally in SPEAR. 9 refs., 8 figs., 2 tabs.

  19. Vertical cross-spectral phases in atmospheric flow

    DEFF Research Database (Denmark)

    Chougule, Abhijit S.; Mann, Jakob; Kelly, Mark C.

    2014-01-01

    . The phase angle of the cross-wind component is observed to be significantly greater than the phase for the along-wind component, which in turn is greater than the phase for the vertical component. The cross-wind and along-wind phases increase with stream-wise wavenumber and vertical separation distance......, but there is no significant change in the phase angle of vertical velocity. The phase angles for all atmospheric stabilities show similar order in phasing. The phase angles from the Høvsøre observations under neutral condition are compared with a rapid distortion theory model which show similar order in phase shift....

  20. Influence of short incompatible practice on the Simon effect: transfer along the vertical dimension and across vertical and horizontal dimensions.

    Science.gov (United States)

    Conde, Erick F Q; Fraga-Filho, Roberto Sena; Lameira, Allan Pablo; Mograbi, Daniel C; Riggio, Lucia; Gawryszewski, Luiz G

    2015-11-01

    In spatial compatibility and Simon tasks, the response is faster when stimulus and response locations are on the same side than when they are on opposite sides. It has been shown that a spatial incompatible practice leads to a subsequent modulation of the Simon effect along the horizontal dimension. It has also been reported that this modulation occurs both along and across vertical and horizontal dimensions, but only after intensive incompatible training (600 trials). In this work, we show that this modulatory effect can be obtained with a smaller number of incompatible trials, changing the spatial arrangement of the vertical response keys to obtain a stronger dimensional overlap between the spatial codes of stimuli and response keys. The results of Experiment 1 showed that 80 incompatible vertical trials abolished the Simon effect in the same dimension. Experiment 2 showed that a modulation of the vertical Simon effect could be obtained after 80 horizontal incompatible trials. Experiment 3 explored whether the transfer effect can also occur in a horizontal Simon task after a brief vertical spatial incompatibility task, and results were similar to the previous experiments. In conclusion, we suggest that the spatial arrangement between response key and stimulus locations may be critical to establish the short-term memory links that enable the transfer of learning between brief incompatible practices and the Simon effects, both along the vertical dimension and across vertical and horizontal dimensions.

  1. Unsteady Viscous Flow Past an Impulsively Started Porous Vertical ...

    African Journals Online (AJOL)

    Journal of the Nigerian Association of Mathematical Physics ... Open Access DOWNLOAD FULL TEXT ... Past an Impulsively Started Porous Vertical Surface with Variable Viscosity Fluid in the Presence of Viscous Dissipation: BSRM Approach.

  2. INSTITUTIONAL ANALYSIS OF FINANCE VERTICALLY INTEGRATED STRUCTURE IN UKRAINE

    Directory of Open Access Journals (Sweden)

    Yu. Petlenko

    2014-01-01

    Full Text Available The article defines the content of the economic and institutional conditions of the financial mechanism of vertically integrated structures in Ukraine, considered the organizational form of vertical integration and describes their impact on the distribution of property between the parties depending vertically integrated structure based on ownership interests. The role of the financial mechanism of the vertically integrated company, identified ways of harmonizing relations between the state, the owners, managers and lenders that promote economic growth and high levels of capitalization. Therefore, the value of the company must be regarded as one of the main indicators of its effectiveness, so the task of identifying and managing the value refers to the priorities of corporations.

  3. Plowing of granular surface by a vertical blade

    Science.gov (United States)

    Judge, Vachitar Singh; Dressaire, Emilie; Sauret, Alban

    2016-11-01

    The interaction of a blade with a layer of fluid is an important industrial problem involved in coating of substrates, removing of snow, plowing the fields for agriculture. Most experimental and theoretical work has focused on the drag and lift forces on plowing blade as it is dragged on a granular surface or studying the flow of the fluid while plowing. However the study of deformation of a granular surface by a vertical plow blade has received less attention, despite significant practical and fundamental implications. In this study, we investigate experimentally the behavior of a granular substrate as a vertical plow blade of finite width is translated at constant speed. The vertical blade directs the granular material outward and sand piles form on either sides. We characterize the dynamics of plowing by measuring and rationalizing the influence of the width of the vertical plow blade, the height of the plow blade, and the depth granular substrate.

  4. Vertical Land Change, Itasca and St. Louis Counties, Minnesota

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — The vertical land change activity focuses on the detection, analysis, and explanation of topographic change. These detection techniques include both quantitative...

  5. Vertical distribution of ectomycorrhizal fungal taxa in a podzol profile

    NARCIS (Netherlands)

    Rosling, A.; Landeweert, R.; Lindahl, B.D.; Larsson, K.H.; Kuyper, T.W.; Taylor, A.F.S.; Finlay, R.F.

    2003-01-01

    Studies of ectomycorrhizal fungal communities in forest soils are usually restricted to the uppermost organic horizons. Boreal forest podzols are highly stratified and little is known about the vertical distribution of ectomycorrhizal communities in the underlying mineral horizons. Ectomycorrhizal r

  6. Vertical Array in Space for Horizontal Air-Showers

    CERN Document Server

    Fargion, D

    2009-01-01

    We consider the guaranteed physics of horizontal (hadron) air-showers, HAS, developing at high (tens km) altitudes. Their morphology and information traces are different from vertical ones. Hundreds of km long HAS are often split by geomagnetic fields in a long (fan-like) showering with a twin spiral tail. The horizontal fan-like airshowers are really tangent and horizontal only at North and South poles. At different latitude these showering plane are turned and inclined by geomagnetic fields. In particular at magnetic equator such tangent horizontal East-West airshowers are bent and developed into a vertical fan air-shower, easily detectable by a vertical array detector (hanging elements by gravity). Such "medusa" arrays maybe composed by inflated floating balloons chains. The light gas float and it acts as an calorimeter for the particles, while it partially sustains the detector weight. Vertically hanging chains as well as rubber doughnut balloons (whose interior may record Cherenkov lights) reveal bundles...

  7. Tree STEM Reconstruction Using Vertical Fisheye Images: a Preliminary Study

    Science.gov (United States)

    Berveglieri, A.; Tommaselli, A. M. G.

    2016-06-01

    A preliminary study was conducted to assess a tree stem reconstruction technique with panoramic images taken with fisheye lenses. The concept is similar to the Structure from Motion (SfM) technique, but the acquisition and data preparation rely on fisheye cameras to generate a vertical image sequence with height variations of the camera station. Each vertical image is rectified to four vertical planes, producing horizontal lateral views. The stems in the lateral view are rectified to the same scale in the image sequence to facilitate image matching. Using bundle adjustment, the stems are reconstructed, enabling later measurement and extraction of several attributes. The 3D reconstruction was performed with the proposed technique and compared with SfM. The preliminary results showed that the stems were correctly reconstructed by using the lateral virtual images generated from the vertical fisheye images and with the advantage of using fewer images and taken from one single station.

  8. Boiling visualization on vertical fins with tunnel-pore structures

    Directory of Open Access Journals (Sweden)

    Kaniowski Robert

    2012-04-01

    Full Text Available The paper presents experimental studies of nucleate boiling heat transfer from a system of connected horizontal and vertical subsurface tunnels. The experiments were carried out for water at atmospheric pressure. The tunnel external covers were manufactured out of perforated copper foil (holes diameter 0.3 mm, sintered with the mini-fins, formed on the vertical side of the 10 mm high rectangular fins and horizontal inter-fin surface. The image acquisition speed was 493 fps (at resolution 400 × 300 pixels with Photonfocus PHOT MV-D1024-160-CL camera. Visualization investigations aimed to identify nucleation sites and flow patterns and to determine the bubble departure diameter and frequency at various superheats for vertical tunnels. At low superheat vapor bubbles are generated nearly exclusively by the vertical tunnel. At medium values of superheat, pores of the horizontal tunnel activate.

  9. Vertical ionization energies of halogen anions in solution

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    Based on the constrained equilibrium state theory,the nonequilibrium solvation energy is derived in the framework of the continuum model.The formula for spectral shift and vertical ionization energy are deduced for a single sphere cavity with the point charge assumption.The new model is adopted to investigate the vertical ionization for halogen atomic and molecular anions X(X = Cl,Br,I,Cl2,Br2,I2) in aqueous solution.According to the calculation using the CCSD-t/aug-cc-pVQZ method in vacuum,our final estimated vertical ionization energies in solution are very close to the experimental observations,while the traditional nonequilibrium solvation theory overestimates these vertical ionization energies.

  10. Incoherent vertical ion losses during multiturn stacking cooling beam injection

    Science.gov (United States)

    Syresin, E. M.

    2014-07-01

    The efficiency of the multiturn ion injection with electron cooling depends on two parameters, namely, cooling efficiency and ion lifetime. The lifetime of freshly injected ions is usually shorter than the lifetime of strongly cooled stacked ions. Freshly injected ions are lost in the vertical direction because the vertical acceptance of the synchrotron is usually a few times smaller than the horizontal acceptance. Incoherent vertical losses of freshly injected ions arise from their multiple scattering by residual gas atoms and transverse diffusion caused by stack noise. Reduced ion lifetime limits the multiturn injection efficiency. Analytical estimations and BETACOOL-based numerical evaluations of the vertical ion losses during multiturn injection are presented in comparison with the experimental data obtained at the HIMAC synchrotron and the S-LSR storage ring.

  11. A Method for Modeling of Floating Vertical Axis Wind Turbine

    DEFF Research Database (Denmark)

    Wang, Kai; Hansen, Martin Otto Laver; Moan, Torgeir

    2013-01-01

    . In order to assess the technical and economic feasibility of this novel concept, a comprehensive simulation tool for modeling of the floating vertical axis wind turbine is needed. This work presents the development of a coupled method for modeling of the dynamics of a floating vertical axis wind turbine......It is of interest to investigate the potential advantages of floating vertical axis wind turbine (FVAWT) due to its economical installation and maintenance. A novel 5MW vertical axis wind turbine concept with a Darrieus rotor mounted on a semi-submersible support structure is proposed in this paper....... This integrated dynamic model takes into account the wind inflow, aerodynamics, hydrodynamics, structural dynamics (wind turbine, floating platform and the mooring lines) and a generator control. This approach calculates dynamic equilibrium at each time step and takes account of the interaction between the rotor...

  12. Shaping the distribution of vertical velocities of antihydrogen in GBAR

    CERN Document Server

    Dufour, G.; Lambrecht, A.; Nesvizhevsky, V.V.; Reynaud, S.; Voronin, A.Yu.

    2014-01-30

    GBAR is a project aiming at measuring the free fall acceleration of gravity for antimatter, namely antihydrogen atoms ($\\overline{\\mathrm{H}}$). Precision of this timing experiment depends crucially on the dispersion of initial vertical velocities of the atoms as well as on the reliable control of their distribution. We propose to use a new method for shaping the distribution of vertical velocities of $\\overline{\\mathrm{H}}$, which improves these factors simultaneously. The method is based on quantum reflection of elastically and specularly bouncing $\\overline{\\mathrm{H}}$ with small initial vertical velocity on a bottom mirror disk, and absorption of atoms with large initial vertical velocities on a top rough disk. We estimate statistical and systematic uncertainties, and show that the accuracy for measuring the free fall acceleration $\\overline{g}$ of $\\overline{\\mathrm{H}}$ could be pushed below $10^{-3}$ under realistic experimental conditions.

  13. TREE STEM RECONSTRUCTION USING VERTICAL FISHEYE IMAGES: A PRELIMINARY STUDY

    Directory of Open Access Journals (Sweden)

    A. Berveglieri

    2016-06-01

    Full Text Available A preliminary study was conducted to assess a tree stem reconstruction technique with panoramic images taken with fisheye lenses. The concept is similar to the Structure from Motion (SfM technique, but the acquisition and data preparation rely on fisheye cameras to generate a vertical image sequence with height variations of the camera station. Each vertical image is rectified to four vertical planes, producing horizontal lateral views. The stems in the lateral view are rectified to the same scale in the image sequence to facilitate image matching. Using bundle adjustment, the stems are reconstructed, enabling later measurement and extraction of several attributes. The 3D reconstruction was performed with the proposed technique and compared with SfM. The preliminary results showed that the stems were correctly reconstructed by using the lateral virtual images generated from the vertical fisheye images and with the advantage of using fewer images and taken from one single station.

  14. Modelling Of Random Vertical Irregularities Of Railway Tracks

    Directory of Open Access Journals (Sweden)

    Podwórna M.

    2015-08-01

    Full Text Available The study presents state-of-the-art in analytical and numerical modelling of random vertical irregularities of continuously welded ballasted railway tracks. The common model of railway track irregularity vertical profiles is applied, in the form of a stationary and ergodic Gaussian process in space. Random samples of track irregularity vertical profiles are generated with the Monte-Carlo method. Based on the numerical method developed in the study, the minimum and recommended sampling number required in the random analysis of railway bridges and number of frequency increments (harmonic components in track irregularity vertical profiles simulation are determined. The lower and upper limits of wavelengths are determined based on the literature studies. The approach yields track irregularity random samples close to reality. The track irregularity model developed in the study can be used in the dynamic analysis of railway bridge / track structure / highspeed train systems.

  15. Trade, Standards and Vertical Coordination: Evidence from The ...

    African Journals Online (AJOL)

    Keywords: Rwanda, Trade Liberalization, FDI, vertical coordination, Standards,. Speciality ... coffee (café marchand) and sell the final on the international market. Office ..... To identify indicators for inclusion in this study and their respective.

  16. Specialized advertising and price competition in vertically differentiated markets

    National Research Council Canada - National Science Library

    Esteban, Lola; Hernández, José M

    2011-01-01

    .... We find that the transition from uniform advertising to targeted advertising can turn a pure vertically differentiated market into a hybrid market which incorporates some features of a monopoly, thus...

  17. Shaping the distribution of vertical velocities of antihydrogen in GBAR

    Science.gov (United States)

    Dufour, G.; Debu, P.; Lambrecht, A.; Nesvizhevsky, V. V.; Reynaud, S.; Voronin, A. Yu.

    2014-01-01

    GBAR is a project aiming at measuring the free-fall acceleration of gravity for antimatter, namely antihydrogen atoms (). The precision of this timing experiment depends crucially on the dispersion of initial vertical velocities of the atoms as well as on the reliable control of their distribution. We propose to use a new method for shaping the distribution of the vertical velocities of , which improves these factors simultaneously. The method is based on quantum reflection of elastically and specularly bouncing with small initial vertical velocity on a bottom mirror disk, and absorption of atoms with large initial vertical velocities on a top rough disk. We estimate statistical and systematic uncertainties, and we show that the accuracy for measuring the free fall acceleration of could be pushed below under realistic experimental conditions.

  18. Remotely operated gripper provides vertical control rod movement

    Science.gov (United States)

    Hutter, E.; Koch, L. J.

    1968-01-01

    Remote actuation of a gripper shaft affects vertical engagement between a drive shaft and control rod. A secondary function of the gripper is to provide remote indication of positive completion of the gripping or ungripping operation.

  19. Glow phenomenon surrounding the vertical stabilizer and OMS pods

    Science.gov (United States)

    1994-01-01

    This 35mm frame, photographed as the Space Shuttle Columbia was orbiting Earth during a 'night' pass, documents the glow phenomenon surrounding the vertical stabilizer and the Orbital Maneuvering System (OMS) pods of the spacecraft.

  20. Vertical Wave Impacts on Offshore Wind Turbine Inspection Platforms

    DEFF Research Database (Denmark)

    Bredmose, Henrik; Jacobsen, Niels Gjøl

    2011-01-01

    on a horizontal inspection platform is computed for five different platform levels. The computational results show details of monopile impact such as slamming pressures from the overturning wave front and the formation of run-up flow. The results show that vertical platform impacts can occur at 20 m water depth....... The dependence of the vertical platform load to the platform level is discussed. Attention is given to the significant downward force that occur after the upward force associated with the vertical impact. The effect of the numerical resolution on the results is assessed. The position of wave overturning is found...... to be influenced by the grid resolution. For the lowest platform levels, the vertical impact is found to contribute to the peak values of in-line force and overturning moment....

  1. Flambage vertical des conduites en souillées Vertical Buckling of Buried Pipes

    Directory of Open Access Journals (Sweden)

    Bournazel C.

    2006-11-01

    Full Text Available Si l'apparition d'un flambage vertical des conduites rigides enfouies dans une tranchée est un phénomène assez rare, il peut ne pas en être de même pour des conduites flexibles dont les propriétés mécaniques sont de nature différente. Une étude théorique et expérimentale, ayant pour but de proposer une méthode analytique de calcul de l'apparition du flambage et de son évolution sous l'effet de la pression interne, a été réalisée. II apparaît que les conduites flexibles actuelles sont très sensibles à ce phénomène et qu'il serait nécessaire, pour l'éliminer à coup sûr, de réexaminer la structure des flexibles ou d'imaginer des artifices dans la procédure d'ensouillage Whereas the appearance of vertical buckling in rigid pipes buried in a trench is a relatively rare phenomenon, the same cannot be said for flexible pipes which have mechanical properties of a different nature. A theoretical and experimental study has been made with the aim of proposing an analytical method for computing the appearance of buckling and its evolution under the effect of outside pressure. Current flexible pipes appear to be very sensitive to this phenomenon, and to be certain of eliminating it the structure of flexible pipes should be reexamined or stratagems in the burying procedure should be devised.

  2. Cephalometric Approach to the Occlusal Vertical Dimension Reestablishment

    OpenAIRE

    João César Zielak; David Gulin Neto; Leonardo Fernandes da Cunha; Tatiana Miranda Deliberador; Allan Fernando Giovanini

    2014-01-01

    The occlusal vertical dimension (OVD) refers to the length of the face as determined by the amount of separation of the jaws. Its determination is important for the manufacture of restorations. However, defining the correct occlusal vertical dimension for edentulous patients is one of the most important steps for function and esthetics rehabilitation. Cephalometry is a standardized method of assessing dental and facial proportions and their interrelation. Additionally, cephalometric analysis ...

  3. Alternative method for reconstruction of antihydrogen annihilation vertices

    Science.gov (United States)

    Amole, C.; Ashkezari, M. D.; Andresen, G. B.; Baquero-Ruiz, M.; Bertsche, W.; Bowe, P. D.; Butler, E.; Cesar, C. L.; Chapman, S.; Charlton, M.; Deller, A.; Eriksson, S.; Fajans, J.; Friesen, T.; Fujiwara, M. C.; Gill, D. R.; Gutierrez, A.; Hangst, J. S.; Hardy, W. N.; Hayano, R. S.; Hayden, M. E.; Humphries, A. J.; Hydomako, R.; Jonsell, S.; Kurchaninov, L.; Madsen, N.; Menary, S.; Nolan, P.; Olchanski, K.; Olin, A.; Povilus, A.; Pusa, P.; Robicheaux, F.; Sarid, E.; Silveira, D. M.; So, C.; Storey, J. W.; Thompson, R. I.; van der Werf, D. P.; Wurtele, J. S.; Yamazaki, Y.

    The ALPHA experiment, located at CERN, aims to compare the properties of antihydrogen atoms with those of hydrogen atoms. The neutral antihydrogen atoms are trapped using an octupole magnetic trap. The trap region is surrounded by a three layered silicon detector used to reconstruct the antiproton annihilation vertices. This paper describes a method we have devised that can be used for reconstructing annihilation vertices with a good resolution and is more efficient than the standard method currently used for the same purpose.

  4. Floating rings in vertical soap films : capillary driven bidimensional buoyancy

    CERN Document Server

    Adami, N

    2013-01-01

    The present study aims to investigate the motion of buoyant rings in vertical soap films. Thickness differences and related bi-dimensional densities are considered as the motor leading to bi-dimensional buoyancy. We show how this effect can be re-interpreted thanks to surface tension profiles in soap films. We propose a model involving surface tension profiles in order to describe the motion of buoyant particles in vertical soap films, and compare it to experimental data.

  5. The Effects of Arms and Countermovement on Vertical Jumping

    Science.gov (United States)

    1989-04-28

    result from potcntiation, during the oertilc stretching phase, of myoelectric activity during the subsequent concentric contraction phase. However...The output signal representing vertical ground reaction force (VGRF) was fed into a Hewlett-Packard (Lexington MA) 310 microcomputer via an Infotek...BOSCO, C., and J.T. VIITASALO. Potentiation of myoelectric activity of human muscles in vertical jumps. Electromyogr clin Neurophysiol 22:549-562, 1982

  6. NASA Airborne-simulated Vertical Data in Google Earth

    Science.gov (United States)

    Chen, A.; Leptoukh, G.; Kempler, S.; Liu, Z.

    2008-12-01

    Google Earth has been widely used as a tool to visualize scientific data that have geospatial elements. The data can be two dimensional and three dimensional, or even four-dimensional. NASA A-Train constellation satellites such as CloudSat, CALIPSO (Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation), and Aqua have been producing lots of vertical data about the atmosphere. Those data are being used for such scientific research as global climate change, weather forecast, etc. NASA also uses airplanes to load some instruments to simulate satellite flying for establishing the sensitivity, calibration, and initial validation of the instruments that will be loaded at satellites. The airborne simulated flying produces simulated vertical data of the atmosphere. Visualization of these kinds of vertical data in Google Earth is helpful for scientific research. Here, a new method is proposed to visualize the simulated vertical data in Google Earth to expose cloud, aerosol, and other atmospheric profiles in the form of curtain along the flying track of the airplane. An interface description language-based render is designed and implemented to process and display the simulated vertical data in the format of image. The image is further processed and cut into transparent small image slices according to the track of the airplane. A COLLADA (COLLAborative Design Activity) 3D model, which is supported by Google Earth, is devised to make the image slices vertically displayed in Google Earth. Using the COLLADA models and airplane flying track coordinates, an airplane track model is implemented in the format of KML (Keyhole Markup Language). The track curtain makes simulated vertical data viewable, transparently or opaquely, in Google Earth. Thus, airborne simulated vertical geospatial data are available to scientists and the general public in a popular venue.

  7. Alternative method for reconstruction of antihydrogen annihilation vertices

    CERN Document Server

    Amole, C; Andresen , G B; Baquero-Ruiz, M; Bertsche, W; Bowe, P D; Butler, E; Cesar, C L; Chapman, S; Charlton, M; Deller, A; Eriksson, S; Fajans, J; Friesen, T; Fujiwara, M C; Gill, D R; Gutierrez, A; Hangst, J S; Hardy, W N; Hayano, R S; Hayden, M E; Humphries, A J; Hydomako, R; Jonsell, S; Kurchaninov, L; Madsen, N; Menary, S; Nolan, P; Olchanski, K; Olin, A; Povilus, A; Pusa, P; Robicheaux, F; Sarid, E; Silveira, D M; So, C; Storey, J W; Thompson, R I; van der Werf, D P; Wurtele, J S; Yamazaki,Y

    2012-01-01

    The ALPHA experiment, located at CERN, aims to compare the properties of antihydrogen atoms with those of hydrogen atoms. The neutral antihydrogen atoms are trapped using an octupole magnetic trap. The trap region is surrounded by a three layered silicon detector used to reconstruct the antiproton annihilation vertices. This paper describes a method we have devised that can be used for reconstructing annihilation vertices with a good resolution and is more efficient than the standard method currently used for the same purpose.

  8. "Vertical Market Power" as Oxymoron: Getting Convergence Mergers Right

    OpenAIRE

    Brennan, Timothy

    2001-01-01

    Vertical market power” is a contradiction in terms because “market power” is essentially horizontal—that is, it depends on relationships of firms within markets. FERC invokes the term to assess “convergence” mergers between electricity generators and natural gas suppliers. It misapplies Department of Justice guidelines for vertical mergers and fails to identify exceptions to a presumption that market power depends only on competitive conditions at any single stage. A three-stage test can ass...

  9. Reliability Analysis and Optimal Design of Monolithic Vertical Wall Breakwaters

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Burcharth, Hans F.; Christiani, E.

    1994-01-01

    Reliability analysis and reliability-based design of monolithic vertical wall breakwaters are considered. Probabilistic models of the most important failure modes, sliding failure, failure of the foundation and overturning failure are described . Relevant design variables are identified and relia......Reliability analysis and reliability-based design of monolithic vertical wall breakwaters are considered. Probabilistic models of the most important failure modes, sliding failure, failure of the foundation and overturning failure are described . Relevant design variables are identified...

  10. Location of foreign direct investment in vertically related markets

    OpenAIRE

    Milliou, Chrysovalantou

    2013-01-01

    We provide an alternative explanation for the commonly observed FDI in developed countries (DCs) considering a vertically related market structure and endogenizing vertical technology transfer (VTT). We show that even though VTT is more costly in a less developed country (LDC), a multinational does not always transfer less technology there than in a DC. Moreover, we show that a multinational sometimes locates its FDI in a DC where, although downstream competition is stronger than in a LDC, it...

  11. Refining geoid and vertical gradient of gravity anomaly

    Directory of Open Access Journals (Sweden)

    Zhang Chijun

    2011-11-01

    Full Text Available We have derived and tested several relations between geoid (N and quasi-geoid (ζ with model validation. The elevation correction consists of the first-term (Bouguer anomaly and second-term (vertical gradient of gravity anomaly. The vertical gradient was obtained from direct measurement and terrain calculation. The test results demonstrated that the precision of geoid can reach centimeter-level in mountains less than 5000 meters high.

  12. 浊点萃取-火焰原子吸收法(CPE-FAAS)测定蜂蜜中痕量锰%Determination of trace manganese in honey by cloud point extracton-flame absorption spectrometry

    Institute of Scientific and Technical Information of China (English)

    杜军良; 尤海霞; 胡杨; 王秀峰

    2013-01-01

    A new method for determination of trace manganese (Ⅱ) in honey by flame atomic absorption spectrometry combined with cloud point extraction was developed.The cloud point extraction system was based on TritonX-100 as surfactant and 8-Oxyquinoline as complexing agent.The parameters affecting cloud point extraction, including pH, extraction temperature, time, ionic strength, dosage of extraction agent and complexing agent were investigated and optimized.Under the optimum conditions, a good linear relationship was observed for manganese (Ⅱ) in the range of 100~700 ng/mL with the detection limit of 5.74 ng/mL and the relative standard deviations of 1.68% (n = 11 ).The recoveries were in the range of 97.3% ~98.6%.The method was rapid, accurate, simple and suitable to apply in the determination of manganese (Ⅱ) in honey.%研究了以8-羟基喹啉为络合剂,非离子表面活性剂TritonX-100为萃取剂的浊点萃取-火焰原子吸收光谱法(CPE-FAAS)测定蜂蜜中痕量Mn(Ⅱ)的方法.研究了pH值,平衡时间,离子强度,萃取剂用量,以及络合剂用量和共存离子干扰等对萃取效果的影响.方法线性范围为100 ~ 700 ng/mL,检出限为5.74 ng/mL,相对标准偏差为1.68% (n=11),回收率为97.3% ~98.6%.

  13. Gold Mine or Minefield: Understanding Russian Law on Vertical Restraints

    Directory of Open Access Journals (Sweden)

    Valentina Rucker

    2015-02-01

    Full Text Available While the Russian Federation represents a significant opportunity for growth, that opportunity is coupled with serious risks. As it relates to managing product distribution, Russian vertical restraint law remains significantly more restrictive than that of the U.S. and, since unless a company is fully integrated, it must manage its distribution system by way of vertical agreements, presents a large problem for businesses seeking to conduct business in Russia. While Russia has made significant steps in the right direction, the lack of consistent application of economic analysis to evaluation of vertical restraints leaves companies exposed. Further, the sometimes inconsistent application of the laws also makes it hard to predict how any particular vertical agreement would be evaluated. Neither American nor Russian antitrust laws establish a list of possible vertical restraints. Thus, there is no exhaustive guidance regarding how these restraints should be treated. U.S. antitrust laws, however, generally place all vertical restraints into one of two categories, intrabrand restraints and interbrand restraints. Intrabrand restraints are those that restrain the downstream firm’s freedom with regard to the resale of the product at issue (distribution restrictions. Interbrand restraints are those that restrict a downstream or upstream firm’s freedom to deal with competitors of the firm imposing the restraint (interbrand restrictions. It should be noted that Russian law does not make this distinction.

  14. Gold Mine or Minefield: Understanding Russian Law on Vertical Restraints

    Directory of Open Access Journals (Sweden)

    Valentina Rucker

    2014-01-01

    Full Text Available While the Russian Federation represents a significant opportunity for growth, that opportunity is coupled with serious risks. As it relates to managing product distribution, Russian vertical restraint law remains significantly more restrictive than that of the U.S. and, since unless a company is fully integrated, it must manage its distribution system by way of vertical agreements, presents a large problem for businesses seeking to conduct business in Russia. While Russia has made significant steps in the right direction, the lack of consistent application of economic analysis to evaluation of vertical restraints leaves companies exposed. Further, the sometimes inconsistent application of the laws also makes it hard to predict how any particular vertical agreement would be evaluated. Neither American nor Russian antitrust laws establish a list of possible vertical restraints. Thus, there is no exhaustive guidance regarding how these restraints should be treated. U.S. antitrust laws, however, generally place all vertical restraints into one of two categories, intrabrand restraints and interbrand restraints. Intrabrand restraints are those that restrain the downstream firm’s freedom with regard to the resale of the product at issue (distribution restrictions. Interbrand restraints are those that restrict a downstream or upstream firm’s freedom to deal with competitors of the firm imposing the restraint (interbrand restrictions. It should be noted that Russian law does not make this distinction.

  15. Vertical load capacities of roof truss cross members

    Institute of Scientific and Technical Information of China (English)

    Gearhart David F.; Mohamed Khaled Morsy

    2016-01-01

    Trusses used for roof support in coal mines are constructed of two grouted bolts installed at opposing forty-five degree angles into the roof and a cross member that ties the angled bolts together. The load on the cross member is vertical, which is transverse to the longitudinal axis, and therefore the cross member is loaded in the weakest direction. Laboratory tests were conducted to determine the vertical load capacity and deflection of three different types of cross members. Single-point load tests, with the load applied in the center of the specimen and double-point load tests, with a span of 2.4 m, were con-ducted. For the single-point load configuration, the yield of the 25 mm solid bar cross member was nom-inally 98 kN of vertical load, achieved at 42 cm of deflection. For cable cross members, yield was not achieved even after 45 cm of deflection. Peak vertical loads were about 89 kN for 17 mm cables and 67 kN for the 15 mm cables. For the double-point load configurations, the 25 mm solid bar cross mem-bers yielded at 150 kN of vertical load and 25 cm of deflection. At 25 cm of deflection individual cable strands started breaking at 133 and 111 kN of vertical load for the 17 and 15 mm cable cross members respectively.

  16. Subjective visual vertical after treatment of benign paroxysmal positional vertigo.

    Science.gov (United States)

    Ferreira, Maristela Mian; Ganança, Maurício Malavasi; Caovilla, Heloisa Helena

    2016-09-28

    Otolith function can be studied by testing the subjective visual vertical, because the tilt of the vertical line beyond the normal range is a sign of vestibular dysfunction. Benign paroxysmal positional vertigo is a disorder of one or more labyrinthine semicircular canals caused by fractions of otoliths derived from the utricular macula. To compare the subjective visual vertical with the bucket test before and immediately after the particle repositioning maneuver in patients with benign paroxysmal positional vertigo. We evaluated 20 patients. The estimated position where a fluorescent line within a bucket reached the vertical position was measured before and immediately after the particle repositioning maneuver. Data were tabulated and statistically analyzed. Before repositioning maneuver, 9 patients (45.0%) had absolute values of the subjective visual vertical above the reference standard and 2 (10.0%) after the maneuver; the mean of the absolute values of the vertical deviation was significantly lower after the intervention (pvertical, evaluated by the bucket test, immediately after the particle repositioning maneuver in patients with benign paroxysmal positional vertigo. Copyright © 2016 Associação Brasileira de Otorrinolaringologia e Cirurgia Cérvico-Facial. Published by Elsevier Editora Ltda. All rights reserved.

  17. FAA Air Traffic Activity: Fiscal Year 1989

    Science.gov (United States)

    1990-11-01

    TX cisco , CA 94102; (414) 556-0643 Texas Crude Building, 801 Travis Street, Suite 120, Houston, TX SEATTLE, WA 77002; (713) 653-3100 Room 194...03 7513 731 TOTAL OPERATIONS.... 22335 2988 11103 7513 731 LYNCHBURG (LYH) N 2 PRIMARY OPERATIONS ... ...................... 25299 2345 13080 9502 372...LSE) N 2 PRIMARY OPERATIONS ................................................................................... 16009 2094 6048 7513 354 TOTAL

  18. FAA Aviation Forecast Conference Proceedings (16th)

    Science.gov (United States)

    1991-02-01

    conversation about Goedelesch or Bach, and music , and so forth. And then he turns to the third guy. And he says, "What’s your 10?" The guys says, "Uh...3.00 to $6.00. ( Obra 89) and the list goes on. There are two other areas where the government’s policy can be changed to better aid the airlines and

  19. FAA Air Traffic Activity, Fiscal Year 1980,

    Science.gov (United States)

    1980-09-30

    INTERNATIONAL NY N 161 162167 KAHULUI HI M 241 112571 LITTLE RUCK ADAMS FIELD AR S 162 161084 SAN JUAN ISLA GRANOE PR L 242 112379 " .. . CORPUS CHRISTI Tx S 163...18 12601 SHREVEPORT LA S 339 315*6 CAMP SPRINGS ANORLAS AFT MO C *19 11995 0 0 GRANO ISLAND MG N 3*0 314 LIRUE I 8 q20 10020 MARION WILLIAMSON IL N...30178 5828 OVEEFLIGTS *079 32 21 4460 66 TOTAL OpLRAYIONS ITT30i 39926 12477 110365 14533 NEBRASKA GRANO ISLAND (SRI) N 2 PAIMARY OPERAIIONS 7695 1817

  20. FAA Fluorescent Penetrant Activities - An Update

    Energy Technology Data Exchange (ETDEWEB)

    Moore, D.G.

    1998-10-20

    The Federal Aviation Administration's Airworthiness Assurance NDI Validation Center (AANC) is currently characterizing low cycle fatigue specimens that will support the needs of penetrant manufacturers, commercial airline industry and the Federal Aviation Administration. The main focus of this characterization is to maintain and enhance the evaluation of penetrant inspection materials and apply resources to support the aircraft community needs. This paper discusses efforts to-date to document the Wright Laboratory penetrant evaluation process and characterize penetrant brightness readings in the initial set of sample calibration panels using Type 1 penetrant.

  1. Intratheater Airlift Functional Area Analysis (FAA)

    Science.gov (United States)

    2011-01-01

    ability to mesh seamlessly with other forces (Army, Marine Corps, and SOF) to open a base and establish air opera- tions from a spectrum of...ing, to force employment and sustainment in concert with theater-assigned mobility forces; includes the rapid, efficient rede - ployment of forces

  2. FAA Air Traffic Activity. Fiscal Year 1984.

    Science.gov (United States)

    1984-09-30

    7 1333 23540 747 25527 8866 TOTAL 55922S 3645 5238 34332 2266 4581 59522 4qq 5 o 152353 1658 RCLLA ( VIH ) FSS IFR-DVFR 28 254 2094 52 2528 2919 VFR 1...PLA:;---Specified information relating to the intended flight of an aircraft, that is filed orally or in writing with a flight service station or an

  3. FAA Air Traffic Activity, Fiscal Year 1979,

    Science.gov (United States)

    1979-09-30

    PRIM"ARYV OPEEIONhS 12953 4169 2756 424NI ITATT TOTAL OPERAIONS 12953 *169 27S6 921 leT TIELANOMAHCI TY WILEY POUST IPRAT N 3 Il PMARY OPERATIONS...ANPI MS S 1 JAN 48*3 1170 660 16*19 JACKSON RSMJLAS RUNIC NMI N I JONh 209 3 7 18 168 IX JALKSIANAALLK NC N I LCM 1 1456 As Ail 2 JACKSUNY ICLE INIL FL

  4. FAA Air Traffic Activity: FY 1990. Addendum.

    Science.gov (United States)

    1990-01-01

    66528 58 1838 54250 10382 TROUTDALE (" TD ) M ITINERANT OPERATIONS ............................................................... 17286 0 54 16820...55627 27 5802 45131 4667 TD )LEiUO EXPRESS (TOL) 5 1 PRIMARY OPERATIONS ....................... .... . .......... ........... 70620 79~77...5642 73477 86041 77345 176968 5048 KENTUCKY BOWLING GREEN ( BWG ) FSS IFR.DVFR ..................................................................... 1002

  5. FAA Air Traffic Activity: Fiscal Year 1988

    Science.gov (United States)

    1988-01-01

    L 147 159416 FORT LAUDERDALE EXECUTIVE .......... FL L 88 222956 LOUISVILLE STANDIFORD ............................. KY M 148 159166 ISUP MACARTHUR...FL S 100 127376 JOHN F KENNEDY INTL ................................... NY L 21 328626 ISUP MACARTHUR...614581 EL PASO INTERNATIONAL ............................. TX M 95 142401 ISUP MACARTHUR ............................................ NY L 16 603903 GREAT

  6. Vertical spectral representation in primitive equation models of the atmosphere

    Energy Technology Data Exchange (ETDEWEB)

    Mizzi, A.; Tribbia, J. [National Center for Atmospheric Research, Boulder, CO (United States); Curry, J. [Univ. of Colorado, Boulder, CO (United States)

    1995-08-01

    Attempts to represent the vertical structure in primitive equation models of the atmosphere with the spectral method have been unsuccessful to date. Linear stability analysis showed that small time steps were required for computational stability near the upper boundary with a vertical spectral representation and found it necessary to use an artificial constraint to force temperature to zero when pressure was zero to control the upper-level horizontal velocities. This ad hoc correction is undesirable, and an analysis that shows such a correction is unnecessary is presented. By formulating the model in terms of velocity and geopotential and then using the hydrostatic equation to calculate temperature from geopotential, temperature is necessarily zero when pressure is zero. The authors applied this technique to the dry-adiabatic primitive equations on the equatorial {beta} and tropical f planes. Vertical and horizontal normal modes were used as the spectral basis functions. The vertical modes are based on vertical normal modes, and the horizontal modes are normal modes for the primitive equations on a {beta} or f plane. The results show that the upper-level velocities do not necessarily increase, total energy is conserved, and kinetic energy is bounded. The authors found an upper-level temporal oscillation in the horizontal domain integral of the horizontal velocity components that is related to mass and velocity field imbalances in the initial conditions or introduced during the integration. Through nonlinear normal-mode initialization, the authors effectively removed the initial condition imbalance and reduced the amplitude of this oscillation. It is hypothesized that the vertical spectral representation makes the model more sensitive to initial condition imbalances, or it introduces imbalance during the integration through vertical spectral truncation. 20 refs., 12 figs.

  7. Influence of vertical flows in wells on groundwater sampling.

    Science.gov (United States)

    McMillan, Lindsay A; Rivett, Michael O; Tellam, John H; Dumble, Peter; Sharp, Helen

    2014-11-15

    Pumped groundwater sampling evaluations often assume that horizontal head gradients predominate and the sample comprises an average of water quality variation over the well screen interval weighted towards contributing zones of higher hydraulic conductivity (a permeability-weighted sample). However, the pumping rate used during sampling may not always be sufficient to overcome vertical flows in wells driven by ambient vertical head gradients. Such flows are reported in wells with screens between 3 and 10m in length where lower pumping rates are more likely to be used during sampling. Here, numerical flow and particle transport modeling is used to provide insight into the origin of samples under ambient vertical head gradients and under a range of pumping rates. When vertical gradients are present, sample provenance is sensitive to pump intake position, pumping rate and pumping duration. The sample may not be drawn from the whole screen interval even with extended pumping times. Sample bias is present even when the ambient vertical flow in the wellbore is less than the pumping rate. Knowledge of the maximum ambient vertical flow in the well does, however, allow estimation of the pumping rate that will yield a permeability-weighted sample. This rate may be much greater than that recommended for low-flow sampling. In practice at monitored sites, the sampling bias introduced by ambient vertical flows in wells may often be unrecognized or underestimated when drawing conclusions from sampling results. It follows that care should be taken in the interpretation of sampling data if supporting flow investigations have not been undertaken.

  8. Resultant vertical prism in toric soft contact lenses.

    Science.gov (United States)

    Sulley, Anna; Hawke, Ryan; Lorenz, Kathrine Osborn; Toubouti, Youssef; Olivares, Giovanna

    2015-08-01

    Rotational stability of toric soft contact lenses (TSCLs) is achieved using a range of designs. Designs utilising prism or peripheral ballast may result in residual prism in the optic zone. This study quantifies the vertical prism in the central 6mm present in TSCLs with various stabilisation methods. Vertical prism was computed using published refractive index and vertical thickness changes in the central optic zone on a full lens thickness map. Thickness maps were measured using scanning transmission microscopy. Designs tested were reusable, silicone hydrogel and hydrogel TSCLs: SofLens(®) Toric, PureVision(®)2 for Astigmatism, PureVision(®) Toric, Biofinity(®) Toric, Avaira(®) Toric, clariti(®) toric, AIR OPTIX(®) for ASTIGMATISM and ACUVUE OASYS(®) for ASTIGMATISM; with eight parameter combinations for each lens (-6.00DS to +3.00DS, -1.25DC, 90° and 180° axes). All TSCL designs evaluated had vertical prism in the optic zone except one which had virtually none (0.01Δ). Mean prism ranged from 0.52Δ to 1.15Δ, with three designs having prism that varied with sphere power. Vertical prism in ACUVUE OASYS(®) for ASTIGMATISM was significantly lower than all other TSCLs tested. TSCL designs utilising prism-ballast and peri-ballast for stabilisation have vertical prism in the central optic zone. In monocular astigmats fitted with a TSCL or those wearing a mix of toric designs, vertical prism imbalance could create or exacerbate disturbances in binocular vision function. Practitioners should be aware of this potential effect when selecting which TSCL designs to prescribe, particularly for monocular astigmats with pre-existing binocular vision anomalies, and when managing complaints of asthenopia in monocular astigmats. Copyright © 2015 British Contact Lens Association. Published by Elsevier Ltd. All rights reserved.

  9. Advanced Si solid phase crystallization for vertical channel in vertical NANDs

    Directory of Open Access Journals (Sweden)

    Sangsoo Lee

    2014-07-01

    Full Text Available The advanced solid phase crystallization (SPC method using the SiGe/Si bi-layer structure is proposed to obtain high-mobility poly-Si thin-film transistors in next generation vertical NAND (VNAND devices. During the SPC process, the top SiGe thin film acts as a selective nucleation layer to induce surface nucleation and equiaxial microstructure. Subsequently, this SiGe thin film microstructure is propagated to the underlying Si thin film by epitaxy-like growth. The initial nucleation at the SiGe surface was clearly observed by in situ transmission electron microscopy (TEM when heating up to 600 °C. The equiaxial microstructures of both SiGe nucleation and Si channel layers were shown in the crystallized bi-layer plan-view TEM measurements. Based on these experimental results, the large-grained and less-defective Si microstructure is expected to form near the channel region of each VNAND cell transistor, which may improve the electrical characteristics.

  10. Vertical Motion Determined Using Satellite Altimetry and Tide Gauges

    Directory of Open Access Journals (Sweden)

    Chung-Yen Kuo

    2008-01-01

    Full Text Available A robust method to estimate vertical crustal motions by combining geocentric sea level measurements from decadal (1992 - 2003 TOPEX/POSEIDON satellite altimetry and long-term (> 40 years relative sea level records from tide gauges using a novel Gauss-Markov stochastic adjustment model is presented. These results represent an improvement over a prior study (Kuo et al. 2004 in Fennoscandia, where the observed vertical motions are primarily attributed to the incomplete Glacial Isostatic Adjustment (GIA in the region since the Last Glacial Maximum (LGM. The stochastic adjustment algorithm and results include a fully-populated a priori covariance matrix. The algorithm was extended to estimate vertical motion at tide gauge locations near open seas and around semi-enclosed seas and lakes. Estimation of nonlinear vertical motions, which could result from co- and postseismic deformations, has also been incorporated. The estimated uncertainties for the vertical motion solutions in coastal regions of the Baltic Sea and around the Great Lakes are in general < 0.5 mm yr-1, which is a significant improvement over existing studies. In the Baltic Sea, the comparisons of the vertical motion solution with 10 collocated GPS radial rates and with the BIFROST GIA model show differences of 0.2 ¡_ 0.9 and 1.6 ¡_ 1.8 mm yr-1, respectively. For the Great Lakes region, the comparisons with the ICE-3G model and with the relative vertical motion estimated using tide gauges only (Mainville and Craymer 2005 show differences of -0.2 ¡_ 0.6 and -0.1 ¡_ 0.5 mm yr-1, respectively. The Alaskan vertical motion solutions (linear and nonlinear models have an estimated uncertainty of ~1.2 - 1.6 mm yr-1, which agree qualitatively with GPS velocity and tide gauge-only solutions (Larsen et al. 2003. This innovative technique could potentially provide improved estimates of the vertical motion globally where long-term tide gauge records exist.

  11. Erecting the system of vertical finical equalization in Ukraine

    Directory of Open Access Journals (Sweden)

    А. О. Козенко

    2013-05-01

    Full Text Available The article analyzes range of problems related to the erection and development of vertical financial equalizing on the background of processes that have triggered after Ukraine acquired its sovereignty. The basic stages and trends of the development are detected for the vertical financial equalizing in Ukraine, which essentially corresponded to the changes in arrangement of inter-budget relations. It is proved that the currently available trends in the development of inter-budget relations in Ukraine have been associated with the stages of vertical financial equalizing in Ukraine. The current system for financial vertical equalization in Ukraine is self-contradictory and slows down social and economical development of the country. Taking this into account the proposals were established as regards the main approaches to further reforming of the system of vertical financial equalization in Ukraine in terms of its shifting to the market economy, setting budget laws of the country in conformity to the legislation on the structure of executive power and local governments, as well as other acts of law determining their functions.

  12. Vertical control in the Class III compensatory treatment

    Directory of Open Access Journals (Sweden)

    Márcio Costa Sobral

    2013-04-01

    Full Text Available INTRODUCTION: Compensatory orthodontic treatment, or simply orthodontic camouflage, consists in an important alternative to orthognathic surgery in the resolution of skeletal discrepancies in adult patients. It is important to point that, to be successfully performed, diagnosis must be detailed, to evaluate, specifically, dental and facial features, as well as the limitations imposed by the magnitude of the discrepancy. The main complaint, patient's treatment expectation, periodontal limits, facial pattern and vertical control are some of the items to be explored in the determination of the viability of a compensatory treatment. Hyperdivergent patients who carry a Class III skeletal discrepancy, associated with a vertical facial pattern, with the presence or tendency to anterior open bite, deserve special attention. In these cases, an efficient strategy of vertical control must be planned and executed. OBJECTIVE: The present article aims at illustrating the evolution of efficient alternatives of vertical control in hiperdivergent patients, from the use, in the recent past, of extra-oral appliances on the lower dental arch (J-hook, until nowadays, with the advent of skeletal anchorage. But for patients with a more balanced facial pattern, the conventional mechanics with Class III intermaxillary elastics, associated to an accentuated curve of Spee in the upper arch and a reverse Curve of Spee in the lower arch, and vertical elastics in the anterior region, continues to be an excellent alternative, if there is extreme collaboration in using the elastics.

  13. Effects of Foam Rolling on Vertical Jump Performance

    Directory of Open Access Journals (Sweden)

    Andrew Jones

    2015-07-01

    Full Text Available Background: Foam rolling is a popular activity utilized by strength and conditioning coaches as it is believed to increase muscle length and break up fibrous adhesions located in connective tissue. However, there is little research investigating the effects of foam rolling on athletic performance. Objective: The purpose of this study was to investigate the effects of lower body foam rolling on vertical jump performance. Methods: Twenty males (age 24.05 ± 2.02 years; height 177.43 ± 6.31 cm; mass 81.41 ± 8.76 kg volunteered to participate. Subjects completed three days of testing, separated by at least twenty-four hours. Day one consisted of baseline vertical jumps on a force plate, followed by familiarization with foam rolling and control protocols. Subjects returned on days two and three and performed 30-second bouts of lower body foam rolling or mimicked foam rolling movements on a skateboard followed by vertical jumps on a force plate. The highest jump from each day was used for statistical analyses. Results: Repeated measures ANOVAs revealed no significant differences in Jump height, impulse, relative ground reaction force, or take-off velocity between conditions. Conclusion: 30-second bouts of lower body foam rolling do not improve vertical jump performance. Keywords: Dynamic Warm-Up, Foam Rolling, Vertical Jump

  14. Scaling of Retinal Image Induced by Vertical Magnification Disparity

    Directory of Open Access Journals (Sweden)

    Minoru Fujii

    2011-05-01

    Full Text Available A surface lying in a frontal plane appears slanted about a vertical axis when the image in one eye is horizontally magnified relative to the image in the other eye. This is predicted from the geometry of the situation. The same surface appears to slant in the opposite direction when the image in the first eye is vertically magnified relative to the image in the other eye (induced effect. One explanation of the induced effect is that the retinal image is isotropically scaled to the same height and the horizontal magnification disparity as a by-product elicits the slant impression. In the current study, scaling of retinal image induced by the stereogram with vertical magnification disparity is investigated. Two horizontal lines were superimposed on the stereogram to measure the scaling. One line presented to one eye was parallel to the other line presented to the other eye, to avoid problems of rivalry or fusion. Three subjects responded apparent lengths of the lines. The result showed that the line superimposed on the vertically magnified image appeared longer than the other line. This supports that scaling of retinal image induced by vertical magnification exists.

  15. ITRF2014 GNSS vertical velocities and global Earth figure variations

    Science.gov (United States)

    Métivier, Laurent; Rouby, Hélène; Rebischung, Paul; Altamimi, Zuheir

    2016-04-01

    We investigate the GNSS station vertical velocities provided by the new solution of the International Terrestrial Reference Frame, the ITRF2014. Constructed from a global network of approximately 1500 stations of the different space geodetic techniques, this new solution provides two times more GNSS station velocities than the ITRF2008, and shows a global pattern of vertical velocities very homogeneous regionally. As in the ITRF2008 solution, large vertical velocities can be seen over North America, Northern Europe, or Antarctica, probably induced predominantly by the Glacial Isostatic Adjustment (GIA) still occurring today since the last deglaciation. But the ITRF2014 solution shows also large vertical velocities over regions such as Greenland and Alaska clearly larger than in the ITRF2008, probably related to last decadal ice melting and its possible acceleration. We investigate different methods to calculate low degree spherical harmonics coefficient from ITRF2014 GNSS vertical velocities. We particularly focus on the components related to the geocenter motion, the ellipticity of the solid Earth, and the J2 rate, and we present time tendencies with respect to different GIA and recent ice melting models.

  16. Vertical Dynamic Impedance of Tapered Pile considering Compacting Effect

    Directory of Open Access Journals (Sweden)

    Wenbing Wu

    2013-01-01

    Full Text Available Based on complex stiffness transfer model, the vertical vibration of tapered pile embedded in layered soil is theoretically investigated by considering the compacting effect of the soil layer surrounding the tapered pile in the piling process. Allowing for the stratification of the surrounding soil and variable crosssection of the tapered pile, the pile-soil system is discretized into finite segments. By virtue of the complex stiffness transfer model to simulate the compacting effect, the complex stiffness of different soil segments surrounding the tapered pile is obtained. Then, substituting the complex stiffness into the vertical dynamic governing equation of tapered pile, the analytical solution of vertical dynamic impedance of tapered pile under vertical exciting force is derived by means of the Laplace technique and impedance function transfer method. Based on the presented solutions, the influence of compacting effect of surrounding soil on vertical dynamic impedance at the pile head is investigated within the low frequency range concerned in the design of dynamic foundation.

  17. Evidence of diel vertical migration in Mnemiopsis leidyi.

    Science.gov (United States)

    Haraldsson, Matilda; Båmstedt, Ulf; Tiselius, Peter; Titelman, Josefin; Aksnes, Dag L

    2014-01-01

    The vertical distribution and migration of plankton organisms may have a large impact on their horizontal dispersal and distribution, and consequently on trophic interactions. In this study we used video-net profiling to describe the fine scale vertical distribution of Mnemiopsis leidyi in the Kattegat and Baltic Proper. Potential diel vertical migration was also investigated by frequent filming during a 24-hour cycle at two contrasting locations with respect to salinity stratification. The video profiles revealed a pronounced diel vertical migration at one of the locations. However, only the small and medium size classes migrated, on average 0.85 m h(-1), corresponding to a total migration distance of 10 m during 12 h. Larger individuals (with well developed lobes, approx. >27 mm) stay on average in the same depth interval at all times. Biophysical data suggest that migrating individuals likely responded to light, and avoided irradiance levels higher than approx. 10 µmol quanta m(-2) s(-1). We suggest that strong stratification caused by low surface salinity seemed to prohibit vertical migration.

  18. Evidence of diel vertical migration in Mnemiopsis leidyi.

    Directory of Open Access Journals (Sweden)

    Matilda Haraldsson

    Full Text Available The vertical distribution and migration of plankton organisms may have a large impact on their horizontal dispersal and distribution, and consequently on trophic interactions. In this study we used video-net profiling to describe the fine scale vertical distribution of Mnemiopsis leidyi in the Kattegat and Baltic Proper. Potential diel vertical migration was also investigated by frequent filming during a 24-hour cycle at two contrasting locations with respect to salinity stratification. The video profiles revealed a pronounced diel vertical migration at one of the locations. However, only the small and medium size classes migrated, on average 0.85 m h(-1, corresponding to a total migration distance of 10 m during 12 h. Larger individuals (with well developed lobes, approx. >27 mm stay on average in the same depth interval at all times. Biophysical data suggest that migrating individuals likely responded to light, and avoided irradiance levels higher than approx. 10 µmol quanta m(-2 s(-1. We suggest that strong stratification caused by low surface salinity seemed to prohibit vertical migration.

  19. Study of vertical breakwater reliability based on copulas

    Science.gov (United States)

    Dong, Sheng; Li, Jingjing; Li, Xue; Wei, Yong

    2016-04-01

    The reliability of a vertical breakwater is calculated using direct integration methods based on joint density functions. The horizontal and uplifting wave forces on the vertical breakwater can be well fitted by the lognormal and the Gumbel distributions, respectively. The joint distribution of the horizontal and uplifting wave forces is analyzed using different probabilistic distributions, including the bivariate logistic Gumbel distribution, the bivariate lognormal distribution, and three bivariate Archimedean copulas functions constructed with different marginal distributions simultaneously. We use the fully nested copulas to construct multivariate distributions taking into account related variables. Different goodness fitting tests are carried out to determine the best bivariate copula model for wave forces on a vertical breakwater. We show that a bivariate model constructed by Frank copula gives the best reliability analysis, using marginal distributions of Gumbel and lognormal to account for uplifting pressure and horizontal wave force on a vertical breakwater, respectively. The results show that failure probability of the vertical breakwater calculated by multivariate density function is comparable to those by the Joint Committee on Structural Safety methods. As copulas are suitable for constructing a bivariate or multivariate joint distribution, they have great potential in reliability analysis for other coastal structures.

  20. Influence of gravity on cat vertical vestibulo-ocular reflex

    Science.gov (United States)

    Tomko, D. L.; Wall, C., III; Robinson, F. R.; Staab, J. P.

    1988-01-01

    The vertical vestibulo-ocular reflex (VOR) was recorded in cats using electro-oculography during sinusoidal angular pitch. Peak stimulus velocity was 50 deg/s over a frequency range from 0.01 to 4.0 Hz. To test the effect of gravity on the vertical VOR, the animal was pitched while sitting upright or lying on its side. Upright pitch changed the cat's orientation relative to gravity, while on-side pitch did not. The cumulative slow component position of the eye during on-side pitch was less symmetric than during upright pitch. Over the mid-frequency range (0.1 to 1.0 Hz), the average gain of the vertical VOR was 14.5 percent higher during upright pitch than during on-side pitch. At low frequencies (less than 0.05 Hz) changing head position relative to gravity raised the vertical VOR gain and kept the reflex in phase with stimulus velocity. These results indicate that gravity-sensitive mechanisms make the vertical VOR more compensatory.

  1. The WZNW model on PSU(1, 1 vertical stroke 2)

    Energy Technology Data Exchange (ETDEWEB)

    Goetz, G. [CEA Centre d' Etudes de Saclay, 91 - Gif-sur-Yvette (France). Service de Physique Theorique; Quella, T. [King' s College London (United Kingdom). Dept. of Mathematics]|[Amsterdam Univ. (Netherlands). KdV Institute for Mathematics; Schomerus, V. [CEA Centre d' Etudes de Saclay, 91 - Gif-sur-Yvette (France). Service de Physique Theorique]|[Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany)

    2006-10-15

    According to the work of Berkovits, Vafa and Witten, the non-linear sigma model on the supergroup PSU(1,1 vertical stroke 2) is the essential building block for string theory on AdS{sub 3}xS{sup 3}xT{sup 4}. Models associated with a non-vanishing value of the RR flux can be obtained through a psu(1,1 vertical stroke 2) invariant marginal deformation of the WZNW model on PSU(1,1 vertical stroke 2). We take this as a motivation to present a manifestly psu(1,1 vertical stroke 2) covariant construction of the model at the Wess-Zumino point, corresponding to a purely NSNS background 3-form flux. At this point the model possesses an enhanced psu(1,1 vertical stroke 2) current algebra symmetry whose representation theory, including explicit character formulas, is developed systematically in the first part of the paper. The space of vertex operators and a free fermion representation for their correlation functions is our main subject in the second part. Contrary to a widespread claim, bosonic and fermionic fields are necessarily coupled to each other. The interaction changes the supersymmetry transformations, with drastic consequences for the multiplets of localized normalizable states in the model. It is only this fact which allows us to decompose the full state space into multiplets of the global supersymmetry. We analyze these decompositions systematically as a preparation for a forthcoming study of the RR deformation. (orig.)

  2. Second Annual Transformative Vertical Flight Concepts Workshop: Enabling New Flight Concepts Through Novel Propulsion and Energy Architectures

    Science.gov (United States)

    Dudley, Michael R. (Editor); Duffy, Michael; Hirschberg, Michael; Moore, Mark; German, Brian; Goodrich, Ken; Gunnarson, Tom; Petermaier,Korbinian; Stoll, Alex; Fredericks, Bill; Gibson, Andy; Newman, Aron; Ouellette, Richard; Antcliff, Kevin; Sinkula, Michael; Buettner-Garrett, Josh; Ricci, Mike; Keogh, Rory; Moser, Tim; Borer, Nick; Rizzi, Steve; Lighter, Gwen

    2015-01-01

    On August 3rd and 4th, 2015, a workshop was held at the NASA Ames Research Center, located at the Moffett Federal Airfield in California to explore the aviation communities interest in Transformative Vertical Flight (TVF) Concepts. The Workshop was sponsored by the AHS International (AHS), the American Institute of Aeronautics and Astronautics (AIAA), the National Aeronautics and Space Administration (NASA), and hosted by the NASA Aeronautics Research Institute (NARI). This second annual workshop built on the success and enthusiasm generated by the first TVF Workshop held in Washington, DC in August of 2014. The previous Workshop identified the existence of a multi-disciplinary community interested in this topic and established a consensus among the participants that opportunities to establish further collaborations in this area are warranted. The desire to conduct a series of annual workshops augmented by online virtual technical seminars to strengthen the TVF community and continue planning for advocacy and collaboration was a direct outcome of the first Workshop. The second Workshop organizers focused on four desired action-oriented outcomes. The first was to establish and document common stakeholder needs and areas of potential collaborations. This includes advocacy strategies to encourage the future success of unconventional vertiport capable flight concept solutions that are enabled by emerging technologies. The second was to assemble a community that can collaborate on new conceptual design and analysis tools to permit novel configuration paths with far greater multi-disciplinary coupling (i.e., aero-propulsive-control) to be investigated. The third was to establish a community to develop and deploy regulatory guidelines. This community would have the potential to initiate formation of an American Society for Testing and Materials (ASTM) F44 Committee Subgroup for the development of consensus-based certification standards for General Aviation scale vertiport

  3. 微波消解-火焰原子吸收光谱法测定常山胡柚中微量元素%FAAS determination of element in microamounts in citrus changshan-huyou with microwave assisted digstion

    Institute of Scientific and Technical Information of China (English)

    徐青华; 寿申岚; 李芳

    2011-01-01

    目的:建立测定常山胡柚中铁、锰、铜、锌等6中微量元素的方法.方法:采用浓硝酸、过氧化氢(体积比3:1)混合液对样品进行消解,火焰原子吸收法测定锌、镉、铁、锰、铅、铜的含量.结果:用6种元素的标准溶液制作了各自的标准曲线,所得线性回归方程的相关系数在0.9991~0.9999之间.在常山胡柚样品的基础上,加入一定量6种元素的标准溶液作回收率试验,得回收率在98.3%~101%之间.结论:本法用微波融样,原子光谱法同时测定常山胡柚中多种微量元素,具有快速、简便、节省试剂、消解完全、污染少等特点,结果令人满意.%Objective:To establish a new method for determinction Fe,Mn,Cu,Zn etc 6 elements in microamounts in Citrus changshan - huyou. Methods: The sample was digested with a mixture of cronc. HNO3, H2O2 in the ratio of 3 to 1 by volume. Microamounts of Fe,Mn,Cu,Zn,Pb,Cd and in Changshan Huyou were determined by FAAS. Results: Standard curves of the 6 elements were prepared by using the respective standard solutions,and linear regression equtions with correlation coefficients from 0.9991 to 0.9999,were obtained. Test for recovery was made by standard addition method,and the values of recovery found were in the range of 98.3% ~101%. Conclusion: This method to determine the mutiple elements in the citrus changshan- huyou by microwave -assisted digestion atomic spectromety have satisfied accuracy and precision rapid and less pollution and the result is very satisfy.

  4. FAAS Determination of Trace Amount of Iron in Huaiqing Chinese Medicines with Cloud Point Extraction%浊点萃取-火焰原子吸收光谱法测定怀药中微量铁

    Institute of Scientific and Technical Information of China (English)

    李英杰; 侯广顺

    2012-01-01

    在pH4.0介质中,以二乙基二硫代氨基甲酸钠(DDTC)为螯合剂,铁与DDTC生成疏水性螯合物,加入Triton X-114表面活性剂用浊点萃取分离富集怀药中微量铁。表面活性剂相用0.01mol·L-1盐酸溶液定容至0.6mL后,所得溶液直接用火焰原子吸收光谱法进行测定。对影响浊点萃取的因素和共存离子的干扰进行了试验并予以优化。铁的检出限(3σ)为0.4μg·L-1。应用此法测定了怀药(怀山药、怀地黄、怀牛膝、怀菊花)中铁的含量,用标准加入法进行方法的回收试验,测得回收率在90.7%~111.2%之间,测定值的相对标准偏差(n=6)在2.5%~4.5%之间。%Trace amount of Fe was separated and enriched from the sample solution buffered at pH 4.0 in the form of hydrophobic coordination complex with DDTC by cloud point extraction using Triton X-114 as surfactant. The surfactant phase was diluted and made up to 0. 6 mL with 0. 01 mol·L-1 HCl and the content of Fe was determined by FAAS. Influential factors to cloud point extraction, and interferences of co-existing ions were studied and optimized. Detection limit (3σ) of the method was found to be 0. 4μg·L-1. The proposed method was applied to the determination of Fe in samples of Huaiqing Chinese medicines (Huaiqing Chinese yam, radices rehmanniae, achyranthes and chrysanthemum), and values of recovery obtained by standard addition method were in the range of 90. 7%--111.2% with RSD's (n=6) in the range of 2. 5%--4. 5%.

  5. Determination of Cu{sup 2+}, Zn{sup 2+} and Pb{sup 2+} in biological and food samples by FAAS after preconcentration with hydroxyapatite nanorods originated from eggshell

    Energy Technology Data Exchange (ETDEWEB)

    Mortada, Wael I., E-mail: w.mortada@yahoo.com [Urology and Nephrology Center, Mansoura University, Mansoura 35516 (Egypt); Kenawy, Ibrahim M.M. [Chemistry Department, Faculty of Science, Mansoura University, Mansoura 35516 (Egypt); Abdelghany, Amr M. [Spectroscopy Department, Physics Division, National Research Center, Cairo 12311 (Egypt); Ismail, Amani M.; Donia, Ahmed F.; Nabieh, Kareem A. [Urology and Nephrology Center, Mansoura University, Mansoura 35516 (Egypt)

    2015-07-01

    Hydroxyapatite nanorods (HAPNRs) were prepared from recycled eggshell by using precipitation method. The structure of the HAPNRs was physicochemically and morphologically characterized by X-ray diffraction, transmission electron microscopy and Fourier transform infrared spectroscopy. The resulting HAPNRs were used for solid phase extractive preconcentration of Cu{sup 2+}, Zn{sup 2+} and Pb{sup 2+} prior to its determination by flame atomic absorption spectrometry. Experimental variables that influence the quantitative extraction of metal ions were optimized by both batch and column methods. The analytes were quantitatively sorbed on the matrix between pHs 6 and 9. The maximum sorption capacity of the HAPNRs has been found to be 2.43, 2.37 and 2.53 mmol g{sup −1} for Cu{sup 2+}, Zn{sup 2+} and Pb{sup 2+}, respectively, with the preconcentration factor of 250. The 3σ detection limit and 10σ quantification limit for Cu{sup 2+}, Zn{sup 2+} and Pb{sup 2+} were found to be 0.72, 0.55 and 5.12 μg L{sup −1} and 2.40, 1.83 and 17.06 μg L{sup −1}, respectively. The calibration curves were linear up to 250 μg L{sup −1} for Cu{sup 2+}, 300 μg L{sup −1} for Zn{sup 2+} and 400 μg L{sup −1} for Pb{sup 2+}. Accuracy of the proposed method was verified using certified reference materials (NCS ZC85006 Tomato, Seronorm Trace Elements Whole Blood L-1, Seronorm Trace Elements Whole Blood L-3 and Seronorm Trace Elements Urine). The present method was successfully applied to the analysis of these metal ions in sea water, biological and food samples. - Highlights: • Hydroxyapatite nanorods were prepared from egg shell. • The prepared nanoparticles showed fast adsorption with high adsorption capacities of the metal ions. • The nanostructures were used for solid phase extraction of copper, zinc and lead ions prior to determination by FAAS. • Accuracy of the method was validated by analyses of certified reference materials.

  6. Vertical Coordination Development Mode and Influential Factors of Agricultural Products

    Institute of Scientific and Technical Information of China (English)

    Tuzhan WANG

    2016-01-01

    In China,the vertical coordination development mode of agricultural products can be divided into traditional market-oriented transaction mode with fluctuation according to market conditions,made-to-order on the basis of farmer organization,company leading cooperative mode,share or shareholding cooperative mode,and vertical integration mode. There are differences in coordination characteristics,advantages and disadvantages,and adaptability between different modes. Traditional vertical coordination mode is transforming and upgrading to close and high-efficient mode. In this process,it is influenced by factors such as cost-benefit balance between farmers and agricultural product processing enterprises,special use of agricultural product processing,structure of agricultural product industry chain,and action of local government.

  7. Experimental Assessment of Moisture Transfer in the Vertical Ventilated Channel

    Directory of Open Access Journals (Sweden)

    Musorina Tatyana

    2016-01-01

    Full Text Available This article considers the moisture transfer phenomenon in the vertical ventilated channel. Also the article considers innovative structures for the vertical ventilated channel.The negative factors connected with moisture accumulation and excessive moistening of a heat insulation are given. Optimum design parameters for definition of the most intensive moisture transfer are discovered: systems with and without grooved lines. Influence that existence of technological gaps (grooved lines has on the speed of air flows in a gap is investigated. Dependence of speed on width of the ventilated gap for a design with the opened and closed grooved lines is established empirically. The dehumidification properties of the vertical ventilated channel are described, as well as dependence of mass evaporation rate on time is established. Processes of drying-out in various conditions are compared.

  8. Cephalometric approach to the occlusal vertical dimension reestablishment.

    Science.gov (United States)

    Zielak, João César; Gulin Neto, David; da Cunha, Leonardo Fernandes; Deliberador, Tatiana Miranda; Giovanini, Allan Fernando

    2014-01-01

    The occlusal vertical dimension (OVD) refers to the length of the face as determined by the amount of separation of the jaws. Its determination is important for the manufacture of restorations. However, defining the correct occlusal vertical dimension for edentulous patients is one of the most important steps for function and esthetics rehabilitation. Cephalometry is a standardized method of assessing dental and facial proportions and their interrelation. Additionally, cephalometric analysis of the facial vertical dimension can establish an individual pattern for each patient. This analysis should become a permanent part of each patient's record. Hence, this study presented a case report with the use of cephalometry as an auxiliary tool in the rehabilitation of OVD. Clinical relevance showed that cephalometric analysis can be an accurate and convenient instrument to treatment planning and prognostic of oral rehabilitation. The reader should understand the clinical implications of using cephalometry as a tool in the rehabilitation of OVD.

  9. Cephalometric Approach to the Occlusal Vertical Dimension Reestablishment

    Directory of Open Access Journals (Sweden)

    João César Zielak

    2014-01-01

    Full Text Available The occlusal vertical dimension (OVD refers to the length of the face as determined by the amount of separation of the jaws. Its determination is important for the manufacture of restorations. However, defining the correct occlusal vertical dimension for edentulous patients is one of the most important steps for function and esthetics rehabilitation. Cephalometry is a standardized method of assessing dental and facial proportions and their interrelation. Additionally, cephalometric analysis of the facial vertical dimension can establish an individual pattern for each patient. This analysis should become a permanent part of each patient’s record. Hence, this study presented a case report with the use of cephalometry as an auxiliary tool in the rehabilitation of OVD. Clinical relevance showed that cephalometric analysis can be an accurate and convenient instrument to treatment planning and prognostic of oral rehabilitation. The reader should understand the clinical implications of using cephalometry as a tool in the rehabilitation of OVD.

  10. Reaching saturation in patterned source vertical organic field effect transistors

    Science.gov (United States)

    Greenman, Michael; Sheleg, Gil; Keum, Chang-min; Zucker, Jonathan; Lussem, Bjorn; Tessler, Nir

    2017-05-01

    Like most of the vertical transistors, the Patterned Source Vertical Organic Field Effect Transistor (PS-VOFET) does not exhibit saturation in the output characteristics. The importance of achieving a good saturation is demonstrated in a vertical organic light emitting transistor; however, this is critical for any application requiring the transistor to act as a current source. Thereafter, a 2D simulation tool was used to explain the physical mechanisms that prevent saturation as well as to suggest ways to overcome them. We found that by isolating the source facet from the drain-source electric field, the PS-VOFET architecture exhibits saturation. The process used for fabricating such saturation-enhancing structure is then described. The new device demonstrated close to an ideal saturation with only 1% change in the drain-source current over a 10 V change in the drain-source voltage.

  11. Surgical Management of Significant Maxillary Anterior Vertical Ridge Defects.

    Science.gov (United States)

    Urban, Istvan A; Monje, Alberto; Nevins, Myron; Nevins, Marc L; Lozada, Jamie L; Wang, Hom-Lay

    2016-01-01

    Severe vertical ridge deficiency in the anterior maxilla represents one of the most challenging scenarios in bone regeneration. Under ideal circumstances, guided bone regeneration in combination with soft tissue management has shown predictable esthetic and functional outcomes. Success largely relies on primary wound closure during and after the surgical procedure. Surgical sites present different challenges that need to be considered when designing the flap. The goal of this article is to propose a classification of flap designs that considers vestibular depth and scar formation around the periosteum when performing vertical ridge augmentation in the atrophic anterior maxilla. The four clinical conditions proposed under this classification are (1) shallow vestibule with healthy periosteum, (2) deep vestibule with healthy periosteum, (3) shallow vestibule with scarred periosteum, and (4) deep vestibule with scarred periosteum. The classification will allow clinicians to achieve tension-free closure and more predictable vertical bone gain.

  12. LIQUEFACTION AND DISPLACEMENT OF SATURATED SAND UNDER VERTICAL VIBRATION LOADING

    Institute of Scientific and Technical Information of China (English)

    LU Xiaobing; TAN Qingming; CHENG C.M.; YU Shanbing; CUI Peng

    2004-01-01

    In order to investigate the influence of the vertical vibration loading on the liquefaction of saturated sand, one dimensional model for the saturated sand with a vertical vibration is presented based on the two phase continuous media theory. The development of the liquefaction and the liquefaction region are analyzed. It is shown that the vertical vibration loading could induce liquefaction.The rate of the liquefaction increases with the increase of the initial limit strain or initial porosity or amplitude and frequency of loading, and increases with the decrease of the permeability or initial modulus. It is shown also that there is a phase lag in the sand column. When the sand permeability distribution is non-uniform, the pore pressure and the strain will rise sharply where the permeability is the smallest, and fracture might be induced. With the development of liquefaction, the strength of the soil foundation becomes smaller and smaller. In the limiting case, landslides or debris flows could occur.

  13. Vertical compared with transverse incisions in abdominal surgery

    DEFF Research Database (Denmark)

    Grantcharov, T P; Rosenberg, J

    2001-01-01

    OBJECTIVE: To reach an evidence-based consensus on the relative merits of vertical and transverse laparotomy incisions. DESIGN: Review of all published randomised controlled trials that compared the postoperative complications after the two main types of abdominal incisions, vertical and transverse......, and late complications (incisional hernia). RESULTS: Eleven randomised controlled trials and seven retrospective studies were identified. The transverse incision offers as good an access to most intra-abdominal structures as a vertical incision. The transverse incision results in significantly less.......0001), and regarding late incisional hernia the pooled odds ratio was 1.68 (95% confidence interval 1.10 to 2.57. p = 0.02). CONCLUSIONS: Transverse incisions in abdominal surgery are based on better anatomical and physiological principles. They should be recommended, as the early postoperative period is associated...

  14. Field Emission of ITO-Coated Vertically Aligned Nanowire Array.

    KAUST Repository

    Lee, Changhwa

    2010-04-29

    An indium tin oxide (ITO)-coated vertically aligned nanowire array is fabricated, and the field emission characteristics of the nanowire array are investigated. An array of vertically aligned nanowires is considered an ideal structure for a field emitter because of its parallel orientation to the applied electric field. In this letter, a vertically aligned nanowire array is fabricated by modified conventional UV lithography and coated with 0.1-μm-thick ITO. The turn-on electric field intensity is about 2.0 V/μm, and the field enhancement factor, β, is approximately 3,078 when the gap for field emission is 0.6 μm, as measured with a nanomanipulator in a scanning electron microscope.

  15. An optimal real-time controller for vertical plasma stabilization

    CERN Document Server

    Cruz, N; Coda, S; Duval, B P; Le, H B; Rodrigues, A P; Varandas, C A F; Correia, C M B A; Goncalves, B S

    2014-01-01

    Modern Tokamaks have evolved from the initial axisymmetric circular plasma shape to an elongated axisymmetric plasma shape that improves the energy confinement time and the triple product, which is a generally used figure of merit for the conditions needed for fusion reactor performance. However, the elongated plasma cross section introduces a vertical instability that demands a real-time feedback control loop to stabilize the plasma vertical position and velocity. At the Tokamak \\`a Configuration Variable (TCV) in-vessel poloidal field coils driven by fast switching power supplies are used to stabilize highly elongated plasmas. TCV plasma experiments have used a PID algorithm based controller to correct the plasma vertical position. In late 2013 experiments a new optimal real-time controller was tested improving the stability of the plasma. This contribution describes the new optimal real-time controller developed. The choice of the model that describes the plasma response to the actuators is discussed. The ...

  16. Vertically aligned carbon nanotube field-effect transistors

    KAUST Repository

    Li, Jingqi

    2012-10-01

    Vertically aligned carbon nanotube field-effect transistors (CNTFETs) have been developed using pure semiconducting carbon nanotubes. The source and drain were vertically stacked, separated by a dielectric, and the carbon nanotubes were placed on the sidewall of the stack to bridge the source and drain. Both the effective gate dielectric and gate electrode were normal to the substrate surface. The channel length is determined by the dielectric thickness between source and drain electrodes, making it easier to fabricate sub-micrometer transistors without using time-consuming electron beam lithography. The transistor area is much smaller than the planar CNTFET due to the vertical arrangement of source and drain and the reduced channel area. © 2012 Elsevier Ltd. All rights reserved.

  17. Two-substrate vertical deposition for stable colloidal crystal chips

    Institute of Scientific and Technical Information of China (English)

    CHEN Xin; SUN Zhiqiang; CHEN Zhimin; ZHANG Kai; YANG Bai

    2005-01-01

    By combining vertical deposition with micromolding in capillaries method, we have demonstrated the two-substrate vertical deposition, an alternative and versatile procedure for fabricating high-quality stable colloidal crystal chips. Apparent bright colors, special UV-vis spectra, scanning electron microscopy (SEM) and atomic force microscopy (AFM) images all prove that high-quality colloidal crystal structures are formed in between the two substrates. During the two-substrate vertical deposition for colloidal crystal chips, capillary force and evaporation of the medium are critical to the formation of the colloidal crystals; while the confinement in between two close substrates makes the resulting colloidal crystal chips more stable. Due to the excellent stability, these colloidal crystal chips can be used to construct some composite optical devices via a simpler and more flexible process. Meanwhile, they can also be further used as the templates for ordered multiporous materials.

  18. Vertical pressure gradient and particle motions in wave boundary layers

    DEFF Research Database (Denmark)

    Jensen, Karsten Lindegård

    The present study covers both a numerical and experimental investigation of the processes in the oscillatory boundary layer. In the first part a direct numerical simulation (DNS) is conducted to study the vertical pressure gradient, and its role in relation to laminar to turbulent transition...... and its role in the fully turbulent boundary layer. The pressure in the flow is obtained from the flow fields of the oscillatory boundary layer. What differs, the vertical pressure gradient, from other turbulent quantities, like e.g. velocity fluctuations is that it can detect newly generated turbulence....... This is in contrast to velocity fluctuations that are diffusive, so they can also contain residual turbulence from the previous half cycle until they are dissipated. Furthermore, the magnitude of the mean value of conditionally averaged vertical pressure gradient (for −∂p∗/∂x∗ 2 > 0) is compared to the submerged...

  19. Performance Analysis of Vertical Handover Strategy for Heterogeneous Overlay Network

    Institute of Scientific and Technical Information of China (English)

    BINGHongyan; HEChen; JIANGLingge

    2004-01-01

    Future wireless networks are envisioned to integrate cellular network and hot spots (e.g. ultrawideband network, UWB) in virtue of the individual coverage and capacity complementary characteristics. In this heterogeneous overlay network, seamless Vertical handover (VHO) is one of the important issues because users expect to be provided with continuous service at anytime, anywhere. This paper presents an analytical vertical handover initiation model based on Received signal strength(RSS) criterion and network blocking probability criterion. Meanwhile, the handover performance criteria of interest are: the handover probability and call-dropping probability. The analytical formulas are derived in details and the handover performance is evaluated by computer simulations. The simulation results show that our model can give improved performance compared with vertical HO algorithm only based on RSS criterion and can perform well when UWB hot spot is in heavy network load.

  20. HORIZONTAL AND VERTICAL INTRA-INDUSTRY TRADE OF TURKEY

    Directory of Open Access Journals (Sweden)

    NEVZAT ŞİMŞEK

    2013-06-01

    Full Text Available Crucial improvement have taken place in intra-industry trade literature since intra-industry trade phenomenon was empirically determined. Nowadays economists discuss on the necessity of distinguishing between horizontal and vertical intra-industry trade especially relating to product differentiation in each industry. As standard Grubel-Lloyd index does not determine the time when two way trade is taken into consideration, in this paper first of all Two-Way Trade index is used and then horizontal intra-industry trade and low-high quality vertical intra-industry trade are distinguished from each other regarding unit value differential. As a result of the analysis the findings show that low quality vertical intra-industry trade dominate in Turkey's intra-industry trade.

  1. Vertical cross-spectral phases in neutral atmospheric flow

    DEFF Research Database (Denmark)

    Chougule, Abhijit S.; Mann, Jakob; Kelly, Mark C.

    2012-01-01

    The cross-spectral phases between velocity components at two heights are analyzed from observations at the Hovsore test site and from the field experiments under the Cooperative Atmosphere-Surface Exchange Study in 1999. These phases represent the degree to which turbulence sensed at one height...... leads (or lags) in time the turbulence sensed at the other height. The phase angle of the cross-wind component is observed to be significantly greater than the phase for the along-wind component, which in turn is greater than the phase for the vertical component. The cross-wind and along-wind phases...... increase with stream-wise wavenumber and vertical separation distance, but there is no significant change in the phase angle of vertical velocity, which remains close to zero. The phases are also calculated using a rapid distortion theory model and large-eddy simulation. The results from the models show...

  2. The vertical velocity dispersion profile of the Galactic thick disk

    CERN Document Server

    Bidin, C Moni; Carraro, G; Méndez, R A; Van Altena, W F; Korchagin, V I; Casetti-Dinescu, D I

    2007-01-01

    We present the results of radial velocity measurements of 770 thick disk red giants toward the South Galactic Pole, vertically distributed from 0.5 kpc to 5 kpc with respect to the Galactic plane. We find a small gradient in the vertical velocity dispersion (sigma_W) of 3.8+/-0.8 km/s kpc. Even more noteworthy, our values of $\\sigma_W$ are small compared to literature values: in the middle of the vertical height range we find sigma_W(z=2kpc)=30 km/s. We found no possible explanation for this small value of sigma_W in terms of sample contamination by thin disk stars, nor by wrong assumptions regarding the metallicity distribution and the derived distances.

  3. THE VERTICAL VELOCITY DISPERSION PROFILE OF THE GALACTIC THICK DISK

    Directory of Open Access Journals (Sweden)

    C. Moni Bidin

    2009-01-01

    Full Text Available We present the results of radial velocity measurements of 770 thick disk red giants toward the South Galactic Pole, vertically distributed from 0.5 kpc to 5 kpc with respect to the Galactic plane. We nd a small gradient in the vertical velocity dispersion (W of 3.8 0.8 km s-1 kpc-1. Even more noteworthy, our values of W are small compared to literature values: in the middle of the vertical height range we nd W;z=2kpc=30 km s-1. We found no possible explanation for this small value oW in terms of sample contamination by thin disk stars, nor by wrong assumptions regarding the metallicity distribution and the derived distances.

  4. Unsupervised Anomalous Vertices Detection Utilizing Link Prediction Algorithms

    CERN Document Server

    Kagan, Dima; Elovici, amd Yuval

    2016-01-01

    In the past decade, complex network structures have penetrated nearly every aspect of our lives. The detection of anomalous vertices in these networks can uncover important insights, such as exposing intruders in a computer network. In this study, we present a novel unsupervised two-layered meta classifier that can be employed to detect irregular vertices in complex networks using solely features extracted from the network topology. Our method is based on the hypothesis that a vertex having many links with low probabilities of existing has a higher likelihood of being anomalous. We evaluated our method on ten networks, using three fully simulated, five semi-simulated, and two real world datasets. In all the scenarios, our method was able to identify anomalous and irregular vertices with low false positive rates and high AUCs. Moreover, we demonstrated that our method can be applied to security-related use cases and is able to detect malicious profiles in online social networks.

  5. Vertical orbit excursion fixed field alternating gradient accelerators

    Science.gov (United States)

    Brooks, Stephen

    2013-08-01

    Fixed field alternating gradient (FFAG) accelerators with vertical orbit excursion (VFFAGs) provide a promising alternative design for rings with fixed-field superconducting magnets. They have a vertical magnetic field component that increases with height in the vertical aperture, yielding a skew quadrupole focusing structure. Scaling-type VFFAGs are found with fixed tunes and no intrinsic limitation on momentum range. This paper presents the first multiparticle tracking of such machines. Proton driver rings to accelerate the 800 MeV beam from the ISIS synchrotron are presented, in terms of both magnet field geometry and longitudinal behavior during acceleration with space charge. The 12 GeV ring produces an output power of at least 2.18 MW. Possible applications of VFFAGs to waste transmutation, hadron therapy, and energy-recovery electron accelerators are also discussed.

  6. Hydrodynamic characteristics of three rows of vertical slotted wall breakwaters

    Science.gov (United States)

    Alsaydalani, Majed O.; Saif, Mohammed A. N.; Helal, Medhat M.

    2017-09-01

    In this study, we examine the hydrodynamic characteristics of three rows of vertical slotted wall breakwaters in which the front and middle walls are permeable and partially immersed in a water channel of constant depth, whereas the third wall is impermeable. The wave-structure interaction and flow behavior of this type of breakwater arrangement are complicated and must be analyzed before breakwaters can be appropriately designed. To study the hydrodynamic breakwater performance, we developed a mathematical model based on the eigenfunction expansion method and a least squares technique for predicting wave interaction with three rows of vertical slotted wall breakwaters. We theoretically examined the wave transmission, reflection, energy loss, wave runup, and wave force under normal regular waves. Comparisons with experimental measurements show that the mathematical model results adequately reproduce most of the important features. The results of this investigation provide a better understanding of the hydrodynamic performance of triple-row vertical slotted wall breakwaters.

  7. THEORETICAL ANALYSIS ON THE VERTICAL DISTRIBUTION OF PARTICLE CONCENTRATION

    Institute of Scientific and Technical Information of China (English)

    Guangqian WANG; Xudong FU

    2001-01-01

    In steady, solid-liquid two-phase turbulent flows, there exist two typical patterns of the vertical distribution of particle concentration. The pattern I shows a maximum concentration at an elevation above the bed. The pattern II shows an increase of the particle concentration downward over the whole vertical,with the maximum at the bed. Most of the theories on particle concentration distribution have been done with the pattern II, and it is lack of a successful theory coveting both of the two patterns. This paper reviews the particle distribution theories, including the diffusion theory, the mixture theory, the energy theory, the similarity theory, the stochastic theory and the kinetic theory. The kinetic theory is also applied to describe the vertical distribution of particle concentration in both dilute and dense flows.

  8. Subjective visual vertical in patients with idiopatic scoliosis.

    Science.gov (United States)

    Cakrt, Ondřej; Slabý, Kryštof; Viktorinová, Lucie; Kolář, Pavel; Jeřábek, Jaroslav

    2011-01-01

    Idiopathic scoliosis (IS) is characterized by a three-dimensional deviation of the vertebral column and its etiopathogenesis is unknown. Various factors are associated with idiopathic scoliosis, among these a prominent role has been attributed to integration of vestibular information with graviception for perception of space. Subjective visual vertical (SVV) is a sensitive sign of verticality perception. The aim of this study was to determine if SVV in adolescents with IS is different from healthy controls. Examination of SVV was performed using the bucket method. Binocular measurements of SVV were made in 23 adolescents with IS (age 14.5 ± 2.5, mean ± SD) and 23 healthy subjects (age 14.0 ± 2.9). The groups differed significantly on SVV deviation (p vertical is altered in IS which may play role in development of IS.

  9. Vertical Motions in Convective Clouds Over Darwin, Australia

    Science.gov (United States)

    Mallinson, H.; Schumacher, C.; Ahmed, F.

    2015-12-01

    Vertical motions are essential in parameterizing convection in large-scale models. Yet in tropical systems vertical motions are difficult to obtain, especially in areas of active convection. This study uses three months of profiler data from Darwin, Australia to directly compare vertical velocity and spectrum width with reflectivity at a height of 1 km (a near-surface rain proxy) for shallow, mid-level, and deep convective clouds. Vertical velocities for all convective clouds were also compared to echo-top heights of varying reflectivities to better understand convective cloud dynamics in relation to their vertical structure. In shallow convective clouds (tops 40 dBz). These regimes could represent different stages in the convective cloud life cycle with strong updrafts and moderate reflectivity occurring in the growing phase and strong downdrafts and large reflectivity occurring in the mature phase. The weak up-and downdraft couplet and low reflectivities suggest a dissipating phase. Mid-level convective clouds (tops 4-8 km) also show three distinct regimes: moderate updrafts at low reflectivities (possible growing phase), a weak up-and downdraft couplet at moderate reflectivities (possible dissipating phase), and strong up-and downdrafts at large reflectivities (mature phase). Deep convective clouds (tops >8 km) show strong updrafts above 4 km for all reflectivities with the strongest downdrafts occurring at large reflectivities. While maximum updrafts vary in height and occur at different reflectivities among cloud types, mean downdraft depth never exceeds 3 km and is always strongest at large reflectivities, which may allow better characterization of cold pool properties. Throughout all convective cloud types, spectrum width has the highest values at lower heights than where the strongest up-and downdrafts occur while also showing a maximum value core around the transition height. In addition, maximum vertical motions occur at or just beneath the 30-dBz echo

  10. NEW TYPE OF VIBRATION STRUCTURE OF VERTICAL DYNAMIC BALANCING MACHINE

    Institute of Scientific and Technical Information of China (English)

    Li Dinggen; Cao Jiguang; Chen Chuanyao; Wang Junwen

    2004-01-01

    A new type of vibration structure of vertical dynamic balancing machine is designed, which is based on the analysis for swing frame of a traditional vertical dynamic balancing machine. The static unbalance and couple unbalance can be separated effectively by using the new machine with the new swing frame. By building the dynamics model, the advantages of the new structure are discussed in detail. The modal and harmonic response are analyzed by using the ANSYS7.0. By comparing the finite element modal analysis with the experimental modal analysis, the natural frequencies and vibration modes are found out. There are many spring boards in the new swing frame. Their stiffness is different and assort with each other. Furthermore, there are three sensors on the measurement points. Therefore, the new dynamic balancing machine can measure the static unbalance and couple unbalance directly, and the influence between them is faint. The new structure has the function of belt-strain compensation to improve the measurement precision. The practical result indicates that the new vertical dynamic balancing machine is suitable for inertial measurement of flying objects, and can overcome the shortcomings of traditional double-plane vertical dynamic balancing machines. The vertical dynamic balancing machine with the new vibration structure can be widely used in the future applications. The modeling and analysis of the new vibration structure provide theoretic instruction and practical experience for designing new type of vertical dynamic balancing machines. Based on the design principles such as stiffness-matching, frequency-adjacence and strain-compensation and so on, various new type of vibration structures can be designed.

  11. Isokinetic knee extension and vertical jumping: are they related?

    Science.gov (United States)

    Iossifidou, Anna; Baltzopoulos, Vasilios; Giakas, Giannis

    2005-10-01

    The aim of this study was to examine joint power generation during a concentric knee extension isokinetic test and a squat vertical jump. The isokinetic test joint power was calculated using four different methods. Five participants performed concentric knee extensions at 0.52, 1.57, 3.14 and 5.23 rad x s(-1) on a Lido isokinetic dynamometer. The squat vertical jump was performed on a Kistler force plate. Kinematic data from both tests were collected and analysed using an ELITE optoelectronic system. An inverse dynamics model was applied to measure knee joint moment in the vertical jump. Knee angular position data from the kinematic analysis in the isokinetic test were used to derive the actual knee angular velocity and acceleration, which, in turn, was used to correct the dynamometer moment for inertial effects. Power was measured as the product of angular velocity and moment at the knee joint in both tests. Significant differences (P knee joint power in the two tests (squat vertical jump: 2255 +/- 434 W; isokinetic knee extension: 771 +/- 81 W). Correlation analysis revealed that there is no relationship between the peak knee joint power during the vertical jump and the slow velocity isokinetic tests. Higher isokinetic velocity tests show better relationships with the vertical jump but only if the correct method for joint power calculation is used in the isokinetic test. These findings suggest that there are important differences in muscle activation and knee joint power development that must be taken into consideration when isokinetic tests are used to predict jumping performance.

  12. Reconstruction of Vertical Profile of Permittivity of Layered Media which is Probed Using Vertical Differential Antenna

    Science.gov (United States)

    Pochanin, Gennadiy P.; Poyedinchuk, Anatoliy Y.; Varianytsia-Roshchupkina, Liudmyla A.; Pochanina, Iryna Ye.

    2016-04-01

    Results of this research are intended to use at GPR investigations of layered media (for example, at roads' inspection) for the processing of collected data and reconstruction of dependence of permittivity on the depth. Recently, an antenna system with a vertical differential configuration of receiving module (Patent UA81652) for GPR was suggested and developed The main advantage of the differential antennas in comparison with bistatic antennas is a high electromagnetic decoupling between the transmitting and receiving modules. The new vertical differential configuration has an additional advantage because it allows collecting GPR data reflected by layered media without any losses of information about these layers [1] and, potentially, it is a more accurate instrument for the layers thickness measurements [2]. The developed antenna system is tested in practice with the GPR at asphalt thickness measurements [3] and shown an accuracy which is better than 0.5 cm. Since this antenna system is good for sounding from above the surface (air coupled technique), the mobile laboratory was equipped with the developed GPR [3]. In order to process big set of GPR data that collected during probing at long routes of the roads, for the data processing it was tested new algorithm of the inverse problem solution. It uses a fast algorithm for calculation of electromagnetic wave diffraction by non-uniform anisotropic layers [4]. The algorithm is based on constructing a special case solution to the Riccati equation for the Cauchy problem and enables a qualitative description of the wave diffraction by the electromagnetic structure of the type within a unitary framework. At this stage as initial data we used synthetic GPR data that were obtained as results of the FDTD simulation of the problem of UWB electromagnetic impulse diffraction on layered media. Differential and bistatic antenna configurations were tested at several different profiles of permittivity. Meanings of permittivity of

  13. Efeito do treinamento sob fadiga no desempenho do salto vertical

    OpenAIRE

    Gallina, Eduardo Catto

    2012-01-01

    Resumo: O estudo objetivou verificar o efeito do treinamento sob fadiga no controle e no desempenho do salto vertical. Dezenove acadêmicos de Educação Física (estatura de 1,88 ± 0,05m, peso 80 ± 8Kg), foram divididos em dois grupos: com fadiga (GCF, n=9) e grupo sem fadiga (GSF, n=10). Os atletas foram extratificados em quartis, em função do desempenho no salto vertical e a partir dos quais sorteados entre os dois grupos a fim de evitar a composição de grupos heterogêneos. Os grupos foram sub...

  14. ELDRS and dose-rate dependence of vertical NPN transistor

    Institute of Scientific and Technical Information of China (English)

    ZHENG Yu-Zhan; LU Wu; REN Di-Yuan; WANG Gai-Li; YU Xue-Feng; GUO Qi

    2009-01-01

    The enhanced low-dose-rate sensitivity (ELDRS) and dose-rate dependence of vertical NPN transistors are investigated in this article.The results show that the vertical NPN transistors exhibit more degradation at low dose rate,and that this degradation is attributed to the increase on base current.The oxide trapped positive charge near the SiO2-Si interface and interface traps at the interface can contribute to the increase on base current and the two-stage hydrogen mechanism associated with space charge effect can well explain the experimental results.

  15. Vertical Capacity of Bucket Foundations in Undrained Soil

    DEFF Research Database (Denmark)

    Barari, Amin; Ibsen, Lars Bo

    2014-01-01

    Offshore wind turbine structures are traditionally founded on gravity concrete foundations or mono-piles. Bucket foundations were developed for the offshore oil and gas industry and are now being used in wind turbine construction. The loading in this application is characterized by a vertical load...... due to the slender construction combined with horizontal forces inducing a large overturning moment. Field tests on bucket foundations were performed to gain insight into the vertical load response of bucket foundations in clay soils. The field tests were accompanied by finite element numerical...... simulations in order to provide a better understanding of the parameters influencing bucket foundation behavior....

  16. Vertical vibration and shape oscillation of acoustically levitated water drops

    Energy Technology Data Exchange (ETDEWEB)

    Geng, D. L.; Xie, W. J.; Yan, N.; Wei, B., E-mail: bbwei@nwpu.edu.cn [Department of Applied Physics, Northwestern Polytechnical University, Xi' an 710072 (China)

    2014-09-08

    We present the vertical harmonic vibration of levitated water drops within ultrasound field. The restoring force to maintain such a vibration mode is provided by the resultant force of acoustic radiation force and drop gravity. Experiments reveal that the vibration frequency increases with the aspect ratio for drops with the same volume, which agrees with the theoretical prediction for those cases of nearly equiaxed drops. During the vertical vibration, the floating drops undergo the second order shape oscillation. The shape oscillation frequency is determined to be twice the vibration frequency.

  17. PADRÃO MOTOR DO SALTO VERTICAL DE ESCOLARES

    OpenAIRE

    Gassenferth Araujo, Luciana; Camaroto, Maurício; Longhi, Adriana; Iberes Lopes Melo, Sebastião

    2013-01-01

    O objetivo do estudo foi analisar o padrão motor do salto vertical de escolares. Participaram do estudo 234 escolares com idades entre 7 e 11 anos. Os instrumentos de medida foram balança digital, estadiômetro, filmadora digital e a matriz analítica para o salto vertical de Myers e colaboradores citada por Gallahue e Ozmun. Cada criança realizou três saltos verticais. De acordo com os resultados do estudo, foi possível observar que 38,03% das crianças se encontravam no estágio inicial, 25,64%...

  18. Evaluation of vertical profiles to design continuous descent approach procedure

    Science.gov (United States)

    Pradeep, Priyank

    The current research focuses on predictability, variability and operational feasibility aspect of Continuous Descent Approach (CDA), which is among the key concepts of the Next Generation Air Transportation System (NextGen). The idle-thrust CDA is a fuel economical, noise and emission abatement procedure, but requires increased separation to accommodate for variability and uncertainties in vertical and speed profiles of arriving aircraft. Although a considerable amount of researches have been devoted to the estimation of potential benefits of the CDA, only few have attempted to explain the predictability, variability and operational feasibility aspect of CDA. The analytical equations derived using flight dynamics and Base of Aircraft and Data (BADA) Total Energy Model (TEM) in this research gives insight into dependency of vertical profile of CDA on various factors like wind speed and gradient, weight, aircraft type and configuration, thrust settings, atmospheric factors (deviation from ISA (DISA), pressure and density of the air) and descent speed profile. Application of the derived equations to idle-thrust CDA gives an insight into sensitivity of its vertical profile to multiple factors. This suggests fixed geometric flight path angle (FPA) CDA has higher degree of predictability and lesser variability at the cost of non-idle and low thrust engine settings. However, with optimized design this impact can be overall minimized. The CDA simulations were performed using Future ATM Concept Evaluation Tool (FACET) based on radar-track and aircraft type data (BADA) of the real air-traffic to some of the busiest airports in the USA (ATL, SFO and New York Metroplex (JFK, EWR and LGA)). The statistical analysis of the vertical profiles of CDA shows 1) mean geometric FPAs derived from various simulated vertical profiles are consistently shallower than 3° glideslope angle and 2) high level of variability in vertical profiles of idle-thrust CDA even in absence of

  19. Application of Prefabricated Vertical Drain in Soil Improvement

    Directory of Open Access Journals (Sweden)

    Tedjakusuma B.

    2012-01-01

    Full Text Available Although the use of Prefabricated Vertical Drain (PVD in soil improvement is not new, this paper is interesting since it gives the full spectrum from preliminary design stage; trial embankment and pilot test to final soil improvement. The final installation of the PVD was based on the soil investigation report and the results of instrumentation monitoring. Finally, using back analysis, vertical and horizontal coefficients of consolidation and compression index can be determined, which can be applied to predict a more accurate prediction of settlement.

  20. Explicit Dynamic FEM Analysis of Multipass Vertical-Horizontal Rolling

    Institute of Scientific and Technical Information of China (English)

    YU Hai-liang; LIU Xiang-hua; ZHAO Xian-ming; WU Di; Y.Kusaba

    2006-01-01

    Three passes of plate rolling during vertical-horizontal rolling process are simulated with explicit dynamic finite element method and updating geometric method. The equivalent strain and stress fields, and shape change at the head and tail of slab during rolling are obtained. The calculated result of the shape at the head and tail of slab is in good agreement with the measured one. The explicit dynamic finite element method and updating geometric method can be used effectively to analyze the multipass vertical-horizontal (V-H) rolling process.