WorldWideScience

Sample records for faa technical manager

  1. Waste Management Technical Manual

    Energy Technology Data Exchange (ETDEWEB)

    Buckingham, J.S. [ed.

    1967-08-31

    This Manual has been prepared to provide a documented compendium of the technical bases and general physical features of Isochem Incorporated`s Waste Management Program. The manual is intended to be used as a means of training and as a reference handbook for use by personnel responsible for executing the Waste Management Program. The material in this manual was assembled by members of Isochem`s Chemical Processing Division, Battelle Northwest Laboratory, and Hanford Engineering Services between September 1965 and March 1967. The manual is divided into the following parts: Introduction, contains a summary of the overall Waste Management Program. It is written to provide the reader with a synoptic view and as an aid in understanding the subsequent parts; Feed Material, contains detailed discussion of the type and sources of feed material used in the Waste Management Program, including a chapter on nuclear reactions and the formation of fission products; Waste Fractionization Plant Processing, contains detailed discussions of the processes used in the Waste Fractionization Plant with supporting data and documentation of the technology employed; Waste Fractionization Plant Product and Waste Effluent Handling, contains detailed discussions of the methods of handling the product and waste material generated by the Waste Fractionization Plant; Plant and Equipment, describes the layout of the Waste Management facilities, arrangement of equipment, and individual equipment pieces; Process Control, describes the instruments and analytical methods used for process control; and Safety describes process hazards and the methods used to safeguard against them.

  2. Technical management courses (before July)

    CERN Multimedia

    2015-01-01

    Please find below the courses in the field of technical management scheduled before July and which have places available.       For more details about a course and to register, please go to the Training Catalogue. If you need a course which is not in the catalogue, please contact your supervisor, your Departmental Training Officer or HR-LD at Technical.Management.Training@cern.ch.

  3. TRManager – Technical Risk Manager

    Directory of Open Access Journals (Sweden)

    Mark A. Gregory

    2009-06-01

    Full Text Available This paper presents research into the development of a new information management technique called Technical Risk Manager. Project management involves the use of processes and information management techniques to aid decision making in the pursuit of project success. Project success may be achieved by meeting time, cost or performance criteria. Current project management practices focus on achieving time and cost project success criteria by using three information management techniques developed in the 1950s: Gantt, PERT and Critical Path Method. Technical Risk Manager has been developed to provide an information management technique that may be used to aid project management decision making in the pursuit of achieving the performance project success criteria.

  4. Manageability of Technical Innovation through Technical Property Rights

    Directory of Open Access Journals (Sweden)

    Michael Horeth

    2016-06-01

    Full Text Available The term innovation is used in many respects and has been evolving over the last decades. This paper mainly focusses on managing technical innovation and differentiates this kind of innovation from others. For managing technical innovation, this work applies technical property rights, patents and utility models. The opportunity to protect the companies’ technical knowledge legally is, apart from strategic measurements like trade secrecy, a very valuable tool to manage and commercialize innovation considering the shift from closed to rather open innovation. This paper discusses the applicability of legal protection measurements for the management of technical innovation containing a critical appraisal.

  5. Technical Management for Buildings

    CERN Document Server

    Vairo, Antonio

    1999-01-01

    This paper is a presentation of an 'instrument' for the optimization of the functionality and conservation of tertiary buildings. This technique has several different names: Building Automation Systems (BAS), Central Control and Monitoring System (CCMS) in English, and Gestion Technique du Bâtiment' (GTB) or Gestion Technique Centralisée (GTC) in French. With this technique it is possible to manage all the functions of a building, it is a modern instrument that introduces the concept of 'automation' in the operation of buildings using computerized procedures, earlier reserved for industrial processes. The system is structured with different automation levels with a distributed intelligence, each level characterized by a communication system (Fieldbus for the lowest and Ethernet for the highest level). In order to apply the BAS to CERN buildings it is necessary to evaluate the advantages, the CERN requirements and the integration with the several existing control and automation systems.

  6. Management of technical information department

    Energy Technology Data Exchange (ETDEWEB)

    Kim, T. H.; Han, D. H.; Moon, H. W. [and others

    1997-03-01

    This report introduces technical information activities in 1996. They are composed of basic tasks and applied tasks. 1. Basic activities - acquisition, cataloging, and Information services 2. Management of KAERI-TIPS (Technical Information Processing System) 3. Construction of the database for nuclear-related Information 4. Role of Specialized Nuclear Information Center in the field of nuclear energy and cooperation with INIS section of IAEA 5. Beside above activities, in 1996 TID homepage was opened and online document delivery service was provided. (author). 25 tabs., 17 figs.

  7. Subjective evaluation with FAA criteria: A multidimensional scaling approach. [ground track control management

    Science.gov (United States)

    Kreifeldt, J. G.; Parkin, L.; Wempe, T. E.; Huff, E. F.

    1975-01-01

    Perceived orderliness in the ground tracks of five A/C during their simulated flights was studied. Dynamically developing ground tracks for five A/C from 21 separate runs were reproduced from computer storage and displayed on CRTS to professional pilots and controllers for their evaluations and preferences under several criteria. The ground tracks were developed in 20 seconds as opposed to the 5 minutes of simulated flight using speedup techniques for display. Metric and nonmetric multidimensional scaling techniques are being used to analyze the subjective responses in an effort to: (1) determine the meaningfulness of basing decisions on such complex subjective criteria; (2) compare pilot/controller perceptual spaces; (3) determine the dimensionality of the subjects' perceptual spaces; and thereby (4) determine objective measures suitable for comparing alternative traffic management simulations.

  8. Managing technical debt in software architecture

    NARCIS (Netherlands)

    Li, Zengyang

    2015-01-01

    Architectural technical debt (ATD) is mainly incurred by architecture decisions that intentionally or unintentionally compromise system-wide quality attributes, particularly maintainability and evolvability. ATD needs to be systematically managed in an appropriate manner, in order to improve the

  9. Technical Order Managers Reference Data.

    Science.gov (United States)

    1981-05-01

    tile technical manimal . NI WdNTEN *NCEV F; IN(IN El-IING %I \\ NV KM1NT lii proces s of planniing. organizin g. staffing. directingu. anid...ACTIVITY. The activity that prepares the manual. PREVEFNTIN*E MAINTENANCE. The care and servicing by personnel for the( purpose of main- taining equipment

  10. A qualitative phenomenological study: Enhanced, risk-based FAA oversight on part 145 maintenance practices

    Science.gov (United States)

    Sheehan, Bryan G.

    The purpose of this qualitative phenomenological study was to examine the phenomenon of enhanced, risk-based Federal Aviation Administration (FAA) oversight of Part 145 repair stations that performed aircraft maintenance for Part 121 air carriers between 2007 and 2014 in Oklahoma. Specifically, this research was utilized to explore what operational changes have occurred in the domestic Part 145 repair station industry such as variations in management or hiring practices, training, recordkeeping and technical data, inventory and aircraft parts supply-chain logistics, equipment, and facilities. After interviewing 12 managers from Part 145 repair stations in Oklahoma, six major theme codes emerged from the data: quality of oversight before 2007, quality of oversight after 2007, advantages of oversight, disadvantages of oversight, status quo of oversight, and process improvement . Of those six major theme codes, 17 subthemes appeared from the data that were used to explain the phenomenon of enhanced oversight in the Part 145 repair station industry. Forty-two percent of the participants indicated a weak FAA oversight system that has hindered the continuous process improvement program in their repair stations. Some of them were financially burdened after hiring additional full-time quality assurance inspectors to specifically manage enhanced FAA oversight. Notwithstanding, the participants of the study indicated that the FAA must apply its surveillance on a more standardized and consistent basis. They want to see this standardization in how FAA inspectors interpret regulations and practice the same quality of oversight for all repair stations, particularly those that are repeat violators and fail to comply with federal aviation regulations. They believed that when the FAA enforces standardization on a consistent basis, repair stations can become more efficient and safer in the performance of their scope of work for the U.S. commercial air transportation industry.

  11. Crew Transportation Technical Management Processes

    Science.gov (United States)

    Mckinnie, John M. (Compiler); Lueders, Kathryn L. (Compiler)

    2013-01-01

    Under the guidance of processes provided by Crew Transportation Plan (CCT-PLN-1100), this document, with its sister documents, International Space Station (ISS) Crew Transportation and Services Requirements Document (CCT-REQ-1130), Crew Transportation Technical Standards and Design Evaluation Criteria (CCT-STD-1140), Crew Transportation Operations Standards (CCT STD-1150), and ISS to Commercial Orbital Transportation Services Interface Requirements Document (SSP 50808), provides the basis for a National Aeronautics and Space Administration (NASA) certification for services to the ISS for the Commercial Provider. When NASA Crew Transportation System (CTS) certification is achieved for ISS transportation, the Commercial Provider will be eligible to provide services to and from the ISS during the services phase.

  12. The Future of Project Management in Technical Communication

    DEFF Research Database (Denmark)

    Kampf, Constance

    2006-01-01

    Project Management increasing shapes workplace communication, especially when technical commuicators participate in cross-disciplinary development teams. This paper looks at the future of project management in technical communication and argues for a communicative approach to project management f...

  13. Economic versus technical approaches to frequency management

    DEFF Research Database (Denmark)

    Falch, Morten; Tadayoni, Reza

    2004-01-01

    economic and technical approaches to frequency management, with an examination of spectrum management challenges and the current regulatory framework as the starting point. The benefits and limitations of the free market approach are discussed, and an economic evaluation of the Danish spectrum is used...... to demonstrate how regulators could incorporate an econmic dimension into frequency allocation. The paper concludes that a free market approach is still not possible for some parts of the frequency management process; in short term, regulators must therefore continue to prioritize between applications.......While telecom markets have been liberalized, the institutional framework for spectrum management has largely remained unchanged. In particular, the process of allocation of the spectrum to different applications is still based on technical rather than economic criteria. This paper contrasts...

  14. Innovation In Management Of Technical Education

    OpenAIRE

    Gopalan, Dr. M Samir; Agarwal, Arun Kumar

    2013-01-01

    Management and Technical education has entered a period of profound transition driven by globalization, technology,demographics, and pressing social imperatives. Because management education is an investment in the futureof business, its important to understand the challenges, opportunities, potential risks and rewards associatedwith this transition. Therefore, this report was created as a resource for leaders in the global managementeducation community as well as business and government lead...

  15. Waste management project technical baseline description

    Energy Technology Data Exchange (ETDEWEB)

    Sederburg, J.P.

    1997-08-13

    A systems engineering approach has been taken to describe the technical baseline under which the Waste Management Project is currently operating. The document contains a mission analysis, function analysis, requirement analysis, interface definitions, alternative analysis, system definition, documentation requirements, implementation definitions, and discussion of uncertainties facing the Project.

  16. Technical and Management Information System (TMIS)

    Science.gov (United States)

    Rau, Timothy R.

    1987-01-01

    The TMIS goals developed to support the Space Station Program (SSP) mission requirements are outlined. The TMIS will provide common capabilities to all SSP centers and facilitate the flow of technical and management information throughout the program as well as SSP decision-making processes. A summary is presented of the various TMIS phases.

  17. 25 CFR 286.11 - Management and technical assistance.

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Management and technical assistance. 286.11 Section 286... DEVELOPMENT PROGRAM § 286.11 Management and technical assistance. (a) Prior to and concurrent with the making... insure that competent management and technical assistance is available to the grantee in the preparation...

  18. 25 CFR 101.7 - Management and technical assistance.

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Management and technical assistance. 101.7 Section 101.7... THE REVOLVING LOAN FUND § 101.7 Management and technical assistance. Prior to and concurrent with the... under title V of the Indian Financing Act of 1974 that competent management and technical assistance is...

  19. The Future of Project Management in Technical Communication

    DEFF Research Database (Denmark)

    Kampf, Constance

    2006-01-01

    Project Management increasing shapes workplace communication, especially when technical commuicators participate in cross-disciplinary development teams. This paper looks at the future of project management in technical communication and argues for a communicative approach to project management...... for technical communication students. The Project Management course in the International Bachelor Program of Marketing and Management Communication at the Aarhus School of Business is described, and the implications fortechnical communication curricula are discussed....

  20. Total Quality Management Plan: Technical and Logistics Services

    Science.gov (United States)

    1989-05-01

    ATES COVERED 4. TITLE AND SUBTITLE S. FUNDING NUMBERS Total Quality Management Plan Technical and Logistics Services 6. AUTHOR(S) 7. PERFORMING...NUMBER OF PAGES TQM ( Total Quality Management ), Technical and Logistics Services, Continuous Process Improvement 16. PRICE CODE 17. SECURITY...Programs C-6 2. ’LFA a. DRMS C-6 b. Defense Supply Centers C-7 c. DLSC C-7 d. DTIC C-8 11. TOTAL QUALITY MANAGEMENT PLAN TECHNICAL AND LOGISTICS SERVICES

  1. Instrumentation Technical Program Management Team: FY-1987 annual report

    Energy Technology Data Exchange (ETDEWEB)

    Hanson, M.L.; Englert, G.L.; Grametbauer, G.L.

    1988-04-14

    This report contains evaluations of process, environmental, health, and safety instrumentation of gaseous diffusion plants. The study was conducted by the instrumentation technical program management team. (LSP)

  2. Logistic management materials-technical support railway enterprises

    OpenAIRE

    Dykan, V.; Borozenetc, T.

    2014-01-01

    The essence of logistics management. Determine the feasibility of applying the principles of logistics management in organizing the logistics of railway transport. Discussed measures to develop suppliers in the implementation of logistics management logistics. Identified the need to develop and implement regulatory and methodical system to improve materials-technical support through the introduction of modern logistics principles. Applied systemic campaign to organize the materials-technical ...

  3. Total Quality Management Implementation at the Defense Technical Information Center

    Science.gov (United States)

    1989-09-01

    improvement programs. -- 7- 14. SUBJECT TERMS 15. NUMBER OF PAGES TOM ( Total Quality Management ), Continuous Process Improvement, ________ Collection and...TECHNICAL INFORMATION CENTER September 1989 Approved for Public Release; Distribution is Unlimited. I8 . 22 ~89 9 29 0 22 TOTAL QUALITY MANAGEMENT IMPLEMENTATION...technical information support, services, and products to the DoD research and development community. The DTIC Total Quality Management (TQM

  4. Logistic management materials-technical support railway enterprises

    OpenAIRE

    Dykan, V.; Borozenetc, T.

    2014-01-01

    The essence of logistics management. Determine the feasibility of applying the principles of logistics management in organizing the logistics of railway transport. Discussed measures to develop suppliers in the implementation of logistics management logistics. Identified the need to develop and implement regulatory and methodical system to improve materials-technical support through the introduction of modern logistics principles. Applied systemic campaign to organize the materials-technical ...

  5. Dynamic management of sustainable development methods for large technical systems

    CERN Document Server

    Krishans, Zigurds; Merkuryev, Yuri; Oleinikova, Irina

    2014-01-01

    Dynamic Management of Sustainable Development presents a concise summary of the authors' research in dynamic methods analysis of technical systems development. The text illustrates mathematical methods, with a focus on practical realization and applications.

  6. Towards FAA Certification of UAVs

    Science.gov (United States)

    Nelson, Stacy

    2003-01-01

    As of June 30, 2003, all Unmanned Aerial Vehicles (UAV), no matter how small, must adhere to the same FAA regulations as human-piloted aircraft. These regulations include certification for flying in controlled airspace and certification of flight software based on RTCA DO-178B. This paper provides an overview of the steps necessary to obtain certification, as well as a discussion about the challenges UAV's face when trying to meet these requirements. It is divided into two parts: 1) Certifications for Flying in Controlled Airspace; 2) Certification of Flight Software per RTCA DO-178B.

  7. Software configuration management plan for the Hanford site technical database

    Energy Technology Data Exchange (ETDEWEB)

    GRAVES, N.J.

    1999-05-10

    The Hanford Site Technical Database (HSTD) is used as the repository/source for the technical requirements baseline and programmatic data input via the Hanford Site and major Hanford Project Systems Engineering (SE) activities. The Hanford Site SE effort has created an integrated technical baseline for the Hanford Site that supports SE processes at the Site and project levels which is captured in the HSTD. The HSTD has been implemented in Ascent Logic Corporation (ALC) Commercial Off-The-Shelf (COTS) package referred to as the Requirements Driven Design (RDD) software. This Software Configuration Management Plan (SCMP) provides a process and means to control and manage software upgrades to the HSTD system.

  8. Ohio Business Management. Technical Competency Profile (TCP).

    Science.gov (United States)

    Ray, Gayl M.; Wilson, Nick; Mangini, Rick

    This document describes the essential competencies from secondary through post-secondary associate degree programs for a career in business management. Ohio College Tech Prep Program standards are described, and a key to profile codes is provided. Sample occupations in this career area, such as management trainee, product manager, and advertising…

  9. 1993 DOE technical standards managers workshop: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    1993-12-31

    This workshop is focused on the benefits of the DOE technical standards program, which is focused toward the preferred use of non-Government standards for DOE activities and the development of DOE technical standards when non-Government standards are not available or are inappropriate. One goal of the program is to replace redundant site-specific standards with more universally accepted documents that have been scrutinized by experts. This replacement is discussed at the workshop along with the problems encountered and solutions found. The workshop provided an opportunity for geographically dispersed people to meet and advance their standards knowledge and efforts to support the program. Safety issues have been the driving force behind the program to date. Several companies offer products and services that support the development, processing, and retrieval of standards. This document mostly comprise vugraphs.

  10. Management Studies Educational Knowledge: Technical, Elite or Political?

    Science.gov (United States)

    Hordern, Jim

    2014-01-01

    This paper draws on the technical, elite and political interpretations of the purpose of management, to identify demands for particular forms of educational knowledge in the management studies curriculum. The varied character of this knowledge is discussed using Bernsteinian concepts of verticality, grammaticality, classification and framing, and…

  11. Management Studies Educational Knowledge: Technical, Elite or Political?

    Science.gov (United States)

    Hordern, Jim

    2014-01-01

    This paper draws on the technical, elite and political interpretations of the purpose of management, to identify demands for particular forms of educational knowledge in the management studies curriculum. The varied character of this knowledge is discussed using Bernsteinian concepts of verticality, grammaticality, classification and framing, and…

  12. The Office of Environmental Management technical reports: a bibliography

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-07-01

    The Office of Environmental Management`s (EM) technical reports bibliography is an annual publication that contains information on scientific and technical reports sponsored by the Office of Environmental Management added to the Energy Science and Technology Database from July 1, 1995 through Sept. 30, 1996. This information is divided into the following categories: Focus Areas and Crosscutting Programs. Support Programs, Technology Integration and International Technology Exchange are now included in the General category. EM`s Office of Science and Technology sponsors this bibliography.

  13. Federal Aviation Administration (FAA airworthiness certification for ceramic matrix composite components in civil aircraft systems

    Directory of Open Access Journals (Sweden)

    Gonczy Stephen T.

    2015-01-01

    Full Text Available Ceramic matrix composites (CMCs are being designed and developed for engine and exhaust components in commercial aviation, because they offer higher temperature capabilities, weight savings, and improved durability compared to metals. The United States Federal Aviation Administration (FAA issues and enforces regulations and minimum standards covering the safe manufacture, operation, and maintenance of civil aircraft. As new materials, these ceramic composite components will have to meet the certification regulations of the FAA for “airworthiness”. The FAA certification process is defined in the Federal Aviation Regulations (Title 14 of the Code of Federal Regulations, FAA policy statements, orders, advisory circulars, technical standard orders, and FAA airworthiness directives. These regulations and documents provide the fundamental requirements and guidelines for design, testing, manufacture, quality assurance, registration, operation, inspection, maintenance, and repair of aircraft systems and parts. For metallic parts in aircraft, the FAA certification and compliance process is well-established for type and airworthiness certification, using ASTM and SAE standards, the MMPDS data handbook, and FAA advisory circulars. In a similar manner for polymer matrix composites (PMC, the PMC industry and the FAA have jointly developed and are refining parallel guidelines for polymer matrix composites (PMCs, using guidance in FAA circulars and the CMH-17 PMC handbook. These documents discuss design methods and codes, material testing, property data development, life/durability assessment, production processes, QA procedures, inspection methods, operational limits, and repairs for PMCs. For ceramic composites, the FAA and the CMC and aerospace community are working together (primarily through the CMH-17 CMC handbook to define and codify key design, production, and regulatory issues that have to be addressed in the certification of CMC components in

  14. The Office of Environmental Management technical reports: A bibliography

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-07-01

    The Office of Environmental Management`s (EM) technical reports bibliography is an annual publication that contains information on scientific and technical reports sponsored by the Office of Environmental Management added to the Energy Science and Technology Database from July 1, 1995--that were published from October 1, 1996--September 30, 1997. This information is divided into the following categories: Miscellaneous, Focus Areas and Crosscutting Programs, Support Programs, Technology Integration and International Technology Exchange, are now included in the Miscellaneous category. The Office of Environmental Management within the Department of Energy (DOE) is responsible for environmental restoration, waste management, technology development and facility transition and management. Subjects include: subsurface contaminants; mixed waste characterization, treatment and disposal; radioactive tank waste remediation; plutonium; deactivation and decommissioning; robotics; characterization, monitoring, and sensor technology; and efficient separations. 880 refs.

  15. Texas Instruments Technical Seminar: Power Management and Wireless

    CERN Multimedia

    2006-01-01

    Monday 6 November TECHNICAL TRAINING SEMINAR 14:00 to 17:30 - Training Centre Auditorium (bldg. 593) Texas Instruments Technical Seminar: Power Management and Wireless Michael Scholtholt, Field Application Engineer / TEXAS INSTRUMENTS (US, D, CH) The range of power management products available today offers the possibility to find the best solution for each application. To select the right product it is therefore necessary to understand system requirements, how power supply products work, and where they differentiate. This Technical Training Seminar will also present an overview of how to choose the right RF platform based on markets and applications: nowadays almost everbody has at least one wireless product in use, and this tendency seems to increase significantly. Power Management Voltage mode vs. current mode control Differentiating DC/DC converters by analyzing control and compensation schemes: line / load regulation, transient response, BOM, board space, ease-of-use Introduction to evaluati...

  16. Texas Instruments Technical Seminar: Power Management and Wireless

    CERN Multimedia

    2006-01-01

    Monday 6 November TECHNICAL TRAINING SEMINAR 14:00 to 17:30 - Training Centre Auditorium (bldg. 593) Texas Instruments Technical Seminar: Power Management and Wireless Michael Scholtholt, Field Application Engineer / TEXAS INSTRUMENTS (US, D, CH) The range of power management products available today offers the possibility to find the best solution for each application. To select the right product it is therefore necessary to understand system requirements, how power supply products work, and where they differentiate. This Technical Training Seminar will also present an overview of how to choose the right RF platform based on markets and applications: nowadays almost everbody has at least one wireless product in use, and this tendency seems to increase significantly. Power Management Voltage mode vs. current mode control Differentiating DC/DC converters by analyzing control and compensation schemes: line / load regulation, transient response, BOM, board space, ease-of-use Introduction to evalu...

  17. Instrumentation Technical Program Management Team: Annual report, FY-1988

    Energy Technology Data Exchange (ETDEWEB)

    Grametbauer, G.L.; Wallace, B.W.; Hanson, M.L.

    1989-01-30

    The Instrumentation Technical Program Management Team (ITPMT) was chartered to consolidate, coordinate, and manage Process and Long- Range Technical Support (P and LRTS) activities in the areas of process, environmental, health, and safety instrumentation. During FY-1988, steps have been taken toward improving the effectiveness of a limited technical support program, including initiation of the acquisition of a modest number of additional people, limitation of numbers of projects to a very selected few, and the encouragement of other Teams to address instrumentation development. This report will be in the same format as the last two. A generalized summation of instrumentation P and LRTS support known to be currently of high priority and expected to be addressed during the FY-1989 and FY-1991 time frame will be presented, with the expectation that addressing all of the listed work will be precluded by presently-unidentifiable demands. FY-1989 milestones will, however, be described in some detail.

  18. Emergency Management Operations Process Mapping: Public Safety Technical Program Study

    Science.gov (United States)

    2011-02-01

    DRDC CSS CR 2011-09 i Emergency Management Operations Process Mapping : Public Security Technical Program Study Anet Greenley ...processus/outils). DRDC CSS CR 2011-09 iii Executive summary Emergency Management Operations Process Mapping PSTP Study [ Greenley , A...technique de sécurité publique – Etude DSTP [ Greenley , A.; Poursina, S.]; DRDC CSS CR 2011-09 L’objectif principal du Programme technique de sécurité

  19. Ohio Medical Office Management. Technical Competency Profile (TCP).

    Science.gov (United States)

    Ray, Gayl M.; Wilson, Nick; Mangini, Rick

    This document provides a framework for a broad-based secondary and postsecondary curriculum to prepare students for employment in medical office management. The first part of the technical competency profile (TCP) contains the following items: an explanation of the purpose and scope of Ohio's TCPs; college tech prep program standards; an overview…

  20. Ohio Marketing Management and Research. Technical Competency Profile (TCP).

    Science.gov (United States)

    Ray, Gayl M.; Wilson, Nick; Mangini, Rick

    This document provides a framework for a broad-based secondary and postsecondary curriculum to prepare students for employment in marketing management and research (MMR). The first part of the technical competency profile (TCP) contains the following items: an explanation of the purpose and scope of Ohio's TCPs; college tech prep program…

  1. Library management and technical services the changing role of technical services in library organizations

    CERN Document Server

    Cargill, Jennifer

    2012-01-01

    This exciting volume explores the role of technical services functions and organizational structure as forces in the library change process. It provides practical information to help administrators make decisions about how their libraries are organized and managed. As libraries change in many ways--organizational structure, design of jobs, managerial philosophy, responsibilities of professionals, and the impact of automation--librarians in technical services, administrators, and personnel officers--need guidance in meeting the new challenges in order to continue providing thorough efficient se

  2. The cloud security ecosystem technical, legal, business and management issues

    CERN Document Server

    Ko, Ryan

    2015-01-01

    Drawing upon the expertise of world-renowned researchers and experts, The Cloud Security Ecosystem comprehensively discusses a range of cloud security topics from multi-disciplinary and international perspectives, aligning technical security implementations with the most recent developments in business, legal, and international environments. The book holistically discusses key research and policy advances in cloud security - putting technical and management issues together with an in-depth treaties on a multi-disciplinary and international subject. The book features contributions from key tho

  3. Places available - Technical management courses (up to end July)

    CERN Multimedia

    2015-01-01

    Please find below the courses in the field of technical management scheduled up to the end of July and which have places available.       For more details about a course and to register, please go to the Training Catalogue. If you need a course that is not in the catalogue, please contact your supervisor, your Departmental Training Officer or the HR-LD group at Communication.Training@cern.ch.  

  4. 77 FR 58301 - Technical Amendment; Airworthiness Standards: Aircraft Engines; Correction

    Science.gov (United States)

    2012-09-20

    ... Technical Amendment entitled, ``Airworthiness Standards: Aircraft Engine'' (77 FR 39623). In that technical... Administration 14 CFR Part 33 RIN 2120-AF57 Technical Amendment; Airworthiness Standards: Aircraft Engines... technical amendment, the FAA clarified aircraft engine vibration test requirements in the...

  5. Management of People by Managers with a Technical Background - Research Results

    Directory of Open Access Journals (Sweden)

    D. Dobrovská

    2001-01-01

    Full Text Available In 1999 and 2000, the Masaryk Institute of Advanced studies of CTU in Prague launched a study of the efficiency of human resource management in Czech enterprises, with emphasis on technically educated managers. About 85 managers, each responsible for 5-250 employees assessed their own HRM activities and attitudes and those of their firm. The following aspects were analysed: evaluating individual management areas, assessing the general management standard of the given company, awareness of the company's personnel management policy, manager's own contribution to formulating the company's personnel management strategy, developing job descriptions, using professional methods of employee selection, promoting employees to the status of manager, periodic assessment of employees, training of staff responsible for assessment, employee remuneration and other motivation tools, etc. Results and data analysis are given in the paper. The managers of the Czech companies reviewed are still involved mainly in operating management, and devote limited time to the conceptual work needed in order to formulate an integral company policy in the area of personnel management. On the basis of this analysis, further training for managers with technical education will be designed and organised by the Masaryk Institute of Advanced Studies.

  6. New Technical Risk Management Development for Carbon Capture Process

    Energy Technology Data Exchange (ETDEWEB)

    Engel, David W.; Letellier, Bruce; Edwards, Brian; Leclaire, Rene; Jones, Edward

    2012-04-30

    The basic CCSI objective of accelerating technology development and commercial deployment of carbon capture technologies through the extensive use of numerical simulation introduces a degree of unfamiliarity and novelty that potentially increases both of the traditional risk elements. In order to secure investor confidence and successfully accelerate the marketability of carbon capture technologies, it is critical that risk management decision tools be developed in parallel with numerical simulation capabilities and uncertainty quantification efforts. The focus of this paper is on the development of a technical risk model that incorporates the specific technology maturity development (level).

  7. Applied Space Systems Engineering. Chapter 17; Manage Technical Data

    Science.gov (United States)

    Kent, Peter

    2008-01-01

    Effective space systems engineering (SSE) is conducted in a fully electronic manner. Competitive hardware, software, and system designs are created in a totally digital environment that enables rapid product design and manufacturing cycles, as well as a multitude of techniques such as modeling, simulation, and lean manufacturing that significantly reduce the lifecycle cost of systems. Because the SSE lifecycle depends on the digital environment, managing the enormous volumes of technical data needed to describe, build, deploy, and operate systems is a critical factor in the success of a project. This chapter presents the key aspects of Technical Data Management (TDM) within the SSE process. It is written from the perspective of the System Engineer tasked with establishing the TDM process and infrastructure for a major project. Additional perspectives are reflected from the point of view of the engineers on the project who work within the digital engineering environment established by the TDM toolset and infrastructure, and from the point of view of the contactors who interface via the TDM infrastructure. Table 17.1 lists the TDM process as it relates to SSE.

  8. An audit questionnaire that examines specifically the management of technical activities clauses in ISO 15189

    OpenAIRE

    2010-01-01

    The aim of this study was to design an audit questionnaire that focuses on the management of the technical activities in a Diagnostic Pathology Laboratory. The ISO 15189 Standard is written in such a way that it continually moves back and forth from topics where the auditor needs to question bench level staff, to topics where the auditor needs to question Technical Management Staff. This makes for a disjointed audit process — both Bench Staff and Technical Managers are repeatedly interrupted....

  9. GROUP GUIDANCE SERVICES MANAGEMENT OF BEHAVIORAL TECHNIC HOMEWORK MODEL

    Directory of Open Access Journals (Sweden)

    Juhri A M.

    2013-09-01

    Full Text Available Abstract: This simple paper describes the implementation of management guidance service groups using the model home visits behavioral techniques (behavior technic homework. The ideas outlined in this paper are intended to add insight for counselors in the management of the implementation of counseling services group that carried out effectively. This simple paper is expected to be used as reference studies in theoretical matters relating to the management guidance services group, for counselors to students both need guidance services and those who passively as they face various problems difficulties martial jar and obstacles in the achievement of learning , In general, this study aims to provide insight in particular in the development of social skills for students, especially the ability to communicate with the participants of the service (students more While specifically to encourage the development of feelings, thoughts, perceptions, insights and attitudes that support embodiments behavior Iebih creative and effective in improving communication skills both verbal and non-verbal for students. Keyword: counselor, counseling, group, student

  10. Fluor Hanford, Inc. Groundwater and Technical Integration Support (Master Project) Quality Assurance Management Plan

    Energy Technology Data Exchange (ETDEWEB)

    Fix, N. J.

    2008-02-20

    The scope of the Fluor Hanford, Inc. Groundwater and Technical Integration Support (Master Project) is to provide technical and integration support to Fluor Hanford, Inc., including operable unit investigations at 300-FF-5 and other groundwater operable units, strategic integration, technical integration and assessments, remediation decision support, and science and technology. This Quality Assurance Management Plan provides the quality assurance requirements and processes that will be followed by the Fluor Hanford, Inc. Groundwater and Technical Integration Support (Master Project).

  11. Leveraging Independent Management and Chief Engineer Hierarchy: Vertically and Horizontally-Derived Technical Authority Value

    Science.gov (United States)

    Barley, Bryan; Newhouse, Marilyn

    2012-01-01

    In the development of complex spacecraft missions, project management authority is usually extended hierarchically from NASA's highest agency levels down to the implementing institution's project team level, through both the center and the program. In parallel with management authority, NASA utilizes a complementary, but independent, hierarchy of technical authority (TA) that extends from the agency level to the project, again, through both the center and the program. The chief engineers (CEs) who serve in this technical authority capacity oversee and report on the technical status and ensure sound engineering practices, controls, and management of the projects and programs. At the lowest level, implementing institutions assign project CEs to technically engage projects, lead development teams, and ensure sound technical principles, processes, and issue resolution. At the middle level, programs and centers independently use CEs to ensure the technical success of their projects and programs. At the agency level, NASA's mission directorate CEs maintain technical cognizance over every program and project in their directorate and advise directorate management on the technical, cost, schedule, and programmatic health of each. As part of this vertically-extended CE team, a program level CE manages a continually varying balance between penetration depth and breadth across his or her assigned missions. Teamwork issues and information integration become critical for management at all levels to ensure value-added use of both the synergy available between CEs at the various agency levels, and the independence of the technical authority at each organization.

  12. 41 CFR 102-37.535 - What information must FAA provide to GSA on its administration of the public airport donation...

    Science.gov (United States)

    2010-07-01

    ... FAA provide to GSA on its administration of the public airport donation program? 102-37.535 Section... (Continued) FEDERAL MANAGEMENT REGULATION PERSONAL PROPERTY 37-DONATION OF SURPLUS PERSONAL PROPERTY Donations to Public Airports § 102-37.535 What information must FAA provide to GSA on its administration...

  13. Unique strategies for technical information management at Johnson Space Center

    Science.gov (United States)

    Krishen, Vijay

    1994-01-01

    In addition to the current NASA manned programs, the maturation of Space Station and the introduction of the Space Exploration programs are anticipated to add substantially to the number and variety of data and documentation at NASA Johnson Space Center (JSC). This growth in the next decade has been estimated at five to ten fold compared to the current numbers. There will be an increased requirement for the tracking and currency of space program data and documents with National pressures to realize economic benefits from the research and technological developments of space programs. From a global perspective the demand for NASA's technical data and documentation is anticipated to increase at local, national, and international levels. The primary users will be government, industry, and academia. In our present national strategy, NASA's research and technology will assume a great role in the revitalization of the economy and gaining international competitiveness. Thus, greater demand will be placed on NASA's data and documentation resources. In this paper the strategies and procedures developed by DDMS, Inc., to accommodate the present and future information utilization needs are presented. The DDMS, Inc., strategies and procedures rely on understanding user requirements, library management issues, and technological applications for acquiring, searching, storing, and retrieving specific information accurately and quickly. The proposed approach responds to changing customer requirements and product deliveries. The unique features of the proposed strategy include: (1) To establish customer driven data and documentation management through an innovative and unique methods to identify needs and requirements. (2) To implement a structured process which responds to user needs, aimed at minimizing costs and maximizing services, resulting in increased productivity. (3) To provide a process of standardization of services and procedures. This standardization is the central

  14. National Airspace System (NAS) Software Life Cycle Management Study

    Science.gov (United States)

    1990-03-01

    located at both FAA Headquarters and the Technical Center in Atlantic City. The following personnel were interviewed: Chuck Bolling AAT-14 Ralph Caprio ...34, July 1987, DRAFT [DOT/FAA-10] FAA-CDRL-240-001B, "Software Requirements Specification", DI -E-X107 (DOT/FAA-il] No author given, "Configuration

  15. Lessons Learned in Regional Sediment Management: The Mobile District Demonstration Program; Technical Program Implementation

    Science.gov (United States)

    2004-05-01

    The goal of the US Army Corps of Engineers Mobile Districts (CESAM) Regional Sediment Management (RSM) technical program was to develop and apply...documents the lessons learned from the RSM technical program implementation by the US Army Corps of Engineers Mobile District, Mobile, AL.

  16. Negotiating Managerial Legitimacy in Smaller Organizations: Management Education, Technical Skill, and Situated Competence.

    Science.gov (United States)

    Taylor, Scott; Thorpe, Richard; Down, Simon

    2002-01-01

    Case studies of four British companies showed that management legitimacy and authority were negotiated along the axes of technical expertise and abstract knowledge. Employees required evidence of management competence, and structural indicators such as management degrees or courses did not confer unquestioned legitimacy. (Contains 62 references.)…

  17. A Socio-Technical Analysis of Web Content Management: "Content is King."

    Science.gov (United States)

    Eschenfelder, Kristin

    2001-01-01

    Examines how ongoing content management needs and tasks affect organizations that maintain Web-based information systems (Web IS). Investigates how organizational context shapes content management practice and configuration of the underlying Web IS technology. Presents a model of the socio-technical context of Web IS content management. (AEF)

  18. An approach to knowledge structuring for advanced phases of the Technical and Management Information System (TMIS)

    Science.gov (United States)

    Goranson, H. T.

    1986-01-01

    The Technical and Management Information System (TMIS) must employ on enlightened approach to its object structure, but basic issues in conceptual structuring remain to be resolved. Sirius outlines the necessary agenda and reports on progress toward solutions.

  19. Information technology - Telecommunications and information exchange between systems - Elements of management information related to OSI transport layer standards; Amendment 1: NCMS Management; Technical Corrigendum 1

    CERN Document Server

    International Organization for Standardization. Geneva

    1994-01-01

    Information technology - Telecommunications and information exchange between systems - Elements of management information related to OSI transport layer standards; Amendment 1: NCMS Management; Technical Corrigendum 1

  20. Management decision-making process at General Viejo Technical High School

    OpenAIRE

    2013-01-01

    The purpose of this research is essential to analyze the management decision making process at General Viejo Technical High School, located in Perez Zeledon, San Jose Province, Costa Rica. This is a descriptive study with qualitative technical support for analyzing the information with the purpose of understanding the data in terms of the educational reality to which it responds. .Among the findings, it is evident that in the management process that is conducted the educational community does...

  1. An analysis of the technical status of high level radioactive waste and spent fuel management systems

    Science.gov (United States)

    English, T.; Miller, C.; Bullard, E.; Campbell, R.; Chockie, A.; Divita, E.; Douthitt, C.; Edelson, E.; Lees, L.

    1977-01-01

    The technical status of the old U.S. mailine program for high level radioactive nuclear waste management, and the newly-developing program for disposal of unreprocessed spent fuel was assessed. The method of long term containment for both of these waste forms is considered to be deep geologic isolation in bedded salt. Each major component of both waste management systems is analyzed in terms of its scientific feasibility, technical achievability and engineering achievability. The resulting matrix leads to a systematic identification of major unresolved technical or scientific questions and/or gaps in these programs.

  2. THE SUPPORTING OF EXPLOITATION AND MAINTENANCE MANAGEMENT WITHIN NETWORKED TECHNICAL SYSTEMS

    Directory of Open Access Journals (Sweden)

    Marcin DĄBROWSKI

    2015-04-01

    Full Text Available Network technical systems are complex systems, which include distribution networks with devices and engineering objects supporting their work. These kind of systems are used for media distribution, such as: drinking water, fuel, gas, heat, etc. One of specific features of this system is large territorial dispersion of technical objects within the system. The exploitation specificity of networked technical systems requires a special approach for implementing maintenance and repair work, taking into account the large territorial dispersion of their components and limited access to technical infra-structure. The features pointed above show the difference between networked technical system and the typical industri-al technical objects (e.g. available in manufacturing plants. This difference also requires the use of specific IT tools for maintenance management. This article discusses examples of selected tools in this class.

  3. Management of technical documents: a projection at the University of Zulia

    Directory of Open Access Journals (Sweden)

    Ana Judith Paredes Chacin

    2015-11-01

    Full Text Available Objective. This paper analyze comprehensively and systematically the principles of organization and technical procedure, which support document management based on the use of information technologies. Method. We developed a study based on the documentary descriptive method in the context of the Dirección de Infraestructura (Dinfra from the Universidad del Zulia. Results. We find evidence of efficiency in the processes that support the management of technical documents: Plans, metrics and memories generated by the Dinfra. Conclusion. The conceptual basis of organizational and technical archives contribute to the systematization, shelter save and documental preservation, and ensure the timely retrieval of technical information for the management of the University of Zulia.

  4. NextGen Technologies on the FAA's Standard Terminal Automation Replacement System

    Science.gov (United States)

    Witzberger, Kevin; Swenson, Harry; Martin, Lynne; Lin, Melody; Cheng, Jinn-Hwei

    2014-01-01

    This paper describes the integration, evaluation, and results from a high-fidelity human-in-the-loop (HITL) simulation of key NASA Air Traffic Management Technology Demonstration - 1 (ATD- 1) technologies implemented in an enhanced version of the FAA's Standard Terminal Automation Replacement System (STARS) platform. These ATD-1 technologies include: (1) a NASA enhanced version of the FAA's Time-Based Flow Management, (2) a NASA ground-based automation technology known as controller-managed spacing (CMS), and (3) a NASA advanced avionics airborne technology known as flight-deck interval management (FIM). These ATD-1 technologies have been extensively tested in large-scale HITL simulations using general-purpose workstations to study air transportation technologies. These general purpose workstations perform multiple functions and are collectively referred to as the Multi-Aircraft Control System (MACS). Researchers at NASA Ames Research Center and Raytheon collaborated to augment the STARS platform by including CMS and FIM advisory tools to validate the feasibility of integrating these automation enhancements into the current FAA automation infrastructure. NASA Ames acquired three STARS terminal controller workstations, and then integrated the ATD-1 technologies. HITL simulations were conducted to evaluate the ATD-1 technologies when using the STARS platform. These results were compared with the results obtained when the ATD-1 technologies were tested in the MACS environment. Results collected from the numerical data show acceptably minor differences, and, together with the subjective controller questionnaires showing a trend towards preferring STARS, validate the ATD-1/STARS integration.

  5. Technical Communications in OSS Content Management Systems: An Academic Institutional Case Study

    Science.gov (United States)

    Cripps, Michael J.

    2011-01-01

    Single sourcing through a content management system (CMS) is altering technical communication practices in many organizations, including institutions of higher education. Open source software (OSS) solutions are currently among the most popular content management platforms adopted by colleges and universities in the United States and abroad. The…

  6. Electronic resource management practical perspectives in a new technical services model

    CERN Document Server

    Elguindi, Anne

    2012-01-01

    A significant shift is taking place in libraries, with the purchase of e-resources accounting for the bulk of materials spending. Electronic Resource Management makes the case that technical services workflows need to make a corresponding shift toward e-centric models and highlights the increasing variety of e-formats that are forcing new developments in the field.Six chapters cover key topics, including: technical services models, both past and emerging; staffing and workflow in electronic resource management; implementation and transformation of electronic resource management systems; the ro

  7. Contributions of PDM Systems in Organizational Technical Data Management

    CERN Document Server

    Ahmed, Zeeshan

    2010-01-01

    Product Data Management (PDM) claims of producing desktop and web based systems to maintain the organizational data to increase the quality of products by improving the process of development, business process flows, change management, product structure management, project tracking and resource planning. Moreover PDM helps in reducing the cost and effort required in engineering. This paper discusses PDM desktop and web based system, needed information and important guidelines for PDM system development, functional requirements, basic components in detail and some already implemented PDM Sys-tems. In the end paper investigates and briefly concludes major currently faced challenges to Product Data Management (PDM) community.

  8. Implementation of quality improvement techniques for management and technical processes in the ACRV project

    Science.gov (United States)

    Raiman, Laura B.

    1992-12-01

    Total Quality Management (TQM) is a cooperative form of doing business that relies on the talents of everyone in an organization to continually improve quality and productivity, using teams and an assortment of statistical and measurement tools. The objective of the activities described in this paper was to implement effective improvement tools and techniques in order to build work processes which support good management and technical decisions and actions which are crucial to the success of the ACRV project. The objectives were met by applications in both the technical and management areas. The management applications involved initiating focused continuous improvement projects with widespread team membership. The technical applications involved applying proven statistical tools and techniques to the technical issues associated with the ACRV Project. Specific activities related to the objective included working with a support contractor team to improve support processes, examining processes involved in international activities, a series of tutorials presented to the New Initiatives Office and support contractors, a briefing to NIO managers, and work with the NIO Q+ Team. On the technical side, work included analyzing data from the large-scale W.A.T.E.R. test, landing mode trade analyses, and targeting probability calculations. The results of these efforts will help to develop a disciplined, ongoing process for producing fundamental decisions and actions that shape and guide the ACRV organization .

  9. Implementation of quality improvement techniques for management and technical processes in the ACRV project

    Science.gov (United States)

    Raiman, Laura B.

    1992-01-01

    Total Quality Management (TQM) is a cooperative form of doing business that relies on the talents of everyone in an organization to continually improve quality and productivity, using teams and an assortment of statistical and measurement tools. The objective of the activities described in this paper was to implement effective improvement tools and techniques in order to build work processes which support good management and technical decisions and actions which are crucial to the success of the ACRV project. The objectives were met by applications in both the technical and management areas. The management applications involved initiating focused continuous improvement projects with widespread team membership. The technical applications involved applying proven statistical tools and techniques to the technical issues associated with the ACRV Project. Specific activities related to the objective included working with a support contractor team to improve support processes, examining processes involved in international activities, a series of tutorials presented to the New Initiatives Office and support contractors, a briefing to NIO managers, and work with the NIO Q+ Team. On the technical side, work included analyzing data from the large-scale W.A.T.E.R. test, landing mode trade analyses, and targeting probability calculations. The results of these efforts will help to develop a disciplined, ongoing process for producing fundamental decisions and actions that shape and guide the ACRV organization .

  10. Industrial management- control and profit a technical approach

    CERN Document Server

    Halevi, Gideon

    2014-01-01

    This volume presents controlling tools for management in order to be in a position to communicate with control engineers concerning technological decisions. The main objective of manufacturing management is to make profit. However, in traditional manufacturing systems none of the separate stages in the process support this objective. Management is not expert in any of these stages, and therefore is dependent on specific experts at each stage and must follow their decisions. Each stage has its own first priority which is not profit and cost. This means that management does not have real control over these functional stages, nor over the process as a whole. This book presents controlling tools for management in order to allow them to communicate better with the experts of the particular manufacturing stages to reach better results and higher profits. It is shown that most enterprises can improve their efficiency rate by between 25 and 60% by using the tools developed here.

  11. Technical support plan for HANDI 2000 business management system

    Energy Technology Data Exchange (ETDEWEB)

    Adams, D.E.

    1998-09-29

    The Hanford Data Integration 2000 (HANDI 2000) Project will result in an integrated and comprehensive set of functional applications containing core information necessary to support the Project Hanford Management Contract. It is based on the Commercial-Off-The-Shelf (COTS) product solution with commercially proven business processes. The PassPort (PP) software is an integrated application for Accounts Payable, Contract Management, Inventory Management, and Purchasing. The PeopleSoft (PS) software is an integrated application for General Ledger, Project Costing, Human Resources, Payroll, Benefits, and Training. The implementation of this set of products, as the first deliverable of the HAND1 2000 Project, is referred to as Business Management System (BMS) and Chemical Management.

  12. Instrumentation Technical Program Management Team: Annual report, FY-1986

    Energy Technology Data Exchange (ETDEWEB)

    Hanson, M.L.; Fitzgerald, J.M.; Grametbauer, G.L.

    1987-03-04

    This report deals with several projects carried out at the Portsmouth and Oak Ridge gaseous diffusion plants. Line recorders were installed at the Portsmouth plant to monitor gas constituents of the cascade process gas. Technical assessment was made of the shutdown of the Oak Ridge plant to identify potential problems. Progress was made on development of a computer-controlled gas recycle system at Oak Ridge. Monitoring instruments were developed for gases in standby cells at Oak Ridge. A criticality radiation alarm was installed at Portsmouth. A scintillation device was developed to monitor purge vent effluents at Portsmouth. The report concludes with a forecast of projects to be carried out in 1987. (JDH)

  13. Refactoring for software design smells managing technical debt

    CERN Document Server

    Suryanarayana, Girish; Sharma, Tushar

    2014-01-01

    Awareness of design smells - indicators of common design problems - helps developers or software engineers understand mistakes made while designing, what design principles were overlooked or misapplied, and what principles need to be applied properly to address those smells through refactoring. Developers and software engineers may ""know"" principles and patterns, but are not aware of the ""smells"" that exist in their design because of wrong or mis-application of principles or patterns. These smells tend to contribute heavily to technical debt - further time owed to fix projects thought to b

  14. Waste Management Program. Technical progress report, October-December 1982

    Energy Technology Data Exchange (ETDEWEB)

    None

    1983-07-01

    This quarterly report provides current information on operations and development programs for the management of radioactive wastes from operation of the Savannah River Plant and offplant participants. The studies on environmental and safety assessments, in situ storage or disposal, waste from development and characterization, process and equipment development, and low-level waste management are a part of the Long-Term Waste Management Technology Program. The following studies are reported for the SR Interim Waste Operations Program: surveillance and maintenance, waste concentration, low-level effluent waste, tank replacement/waste transfer, and solid waste storage and related activities.

  15. Independent Electricity Market Operator integration management participant technical reference manual

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1999-11-15

    The document provides potential participants with the essential technical information to permit them to participate in the IMO-administered markets, and is not intended to be a complete technical reference manual for all issues within the realm of electricity production, distribution, or consumption. Written for the participants, it provides only that information which is relevant to the participant for interfacing with the IMO and participating in the market. Written as a generic guide, all the information contained within it may not be relevant to all the participants. The document's intent is to provide participants with a description of the various facilities and interfaces required by market participants to take part in the IMO-administered markets. The document supplements the market rules and provides installation, set-up, and configuration information for the various tools and facilities that will be required for market participation as a supplier, carrier/delivery (transmitter/distributer), generator, or consumer in the market. Aspects considered include: participant workstation specifications, dispatch workstation specification, message exchange, remote terminal unit specification, AGC operational RTU specification, real time network connection specification, telephone connection specification, revenue administration specification, funds administration specification, data catalogues, market information, power grid connection requirements, and appendices.

  16. Quality tools in a process of technical project management

    OpenAIRE

    Gwiazda, A.

    2006-01-01

    Purpose: The aim of this paper is to show how it could utilize the tools of quality management for the processof project management. Also it could be presented a modification of the Ishikawa diagram.Design/methodology/approach: In presented work has been applied the research methodology that bases onthe theoretical analysis and on the empirical researches. It is also presented a practical solution that proved thevalidity of proposed method.Findings: The base finding of the presented work is t...

  17. Technical elements, demonstration projects, and fiscal models in Medicaid managed care for people with developmental disabilities.

    Science.gov (United States)

    Kastner, T A; Walsh, K K; Criscione, T

    1997-08-01

    We presented a general model of the structure and functioning of managed care and described elements (provider networks, fiscal elements, risk estimation, case-mix, management information systems, practice parameters, and quality improvement) critical to service delivery for people with developmental disabilities. A number of technical elements of managed care systems were delineated and reviewed in relation to the inclusion of people with developmental disabilities. Several managed care demonstration projects were described and, finally, a multi-year hypothetical budget model, including long-term care, was presented as a framework for considering how managed care affects specific service structures. Implications for people with developmental disabilities were discussed.

  18. Special Use Airspace Management System

    Data.gov (United States)

    Department of Transportation — The Special-Use Airspace Management System (SAMS) supports the FAA military operations (MILOPS) mission. It automates the coordination of FAA and U.S. Department of...

  19. The NASA Air Traffic Management Ontology: Technical Documentation

    Science.gov (United States)

    Keller, Richard M.

    2017-01-01

    This document is intended to serve as comprehensive documentation for the NASA Air Traffic Management (ATM) Ontology. The ATM Ontology is a conceptual model that defines key classes of entities and relationships pertaining to the US National Airspace System (NAS) and the management of air traffic through that system. A wide variety of classes are represented in the ATM Ontology, including classes corresponding to flights, aircraft, manufacturers, airports, airlines, air routes, NAS facilities, air traffic control advisories, weather phenomena, and many others. The Ontology can be useful in the context of a variety of information management tasks relevant to NAS, including information exchange, data query and search, information organization, information integration, and terminology standardization.

  20. Waste Management Program. Technical progress report, July-December, 1984

    Energy Technology Data Exchange (ETDEWEB)

    None

    1986-10-01

    This report provides information on operations and development programs for the management of radioactive wastes from operation of the Savannah River Plant and offplant participants. The studies on environmental and safety assessments, other support, in situ storage or disposal, waste form development and characterization, process and equipment development, and the Defense Waste Processing Facility are a part of the Long-Term Waste Management Technology Program. The following studies are reported for the SR Interim Waste Operations: tank farm operation, inspection program, burial ground operations, and waste transfer/tank replacement.

  1. Ohio Legal Office Managment. Technical Competency Profile (TCP).

    Science.gov (United States)

    Ray, Gayl M.; Wilson, Nick; Mangini, Rick

    This document, which lists core business and legal office management competencies identified by representatives from education and business and industry throughout Ohio, is intended to assist individuals and organizations in developing college tech prep programs that will prepare students from secondary through post-secondary associate degree…

  2. Ohio Financial Services and Risk Management. Technical Competency Profile (TCP).

    Science.gov (United States)

    Ray, Gayl M.; Wilson, Nick; Mangini, Rick

    This document describes the essential competencies from secondary through post-secondary associate degree programs for a career in financial services and risk management. Ohio College Tech Prep Program standards are described, and a key to profile codes is provided. Sample occupations in this career area, such as financial accountant, loan…

  3. The PCP SYS IV Management System: Technical Overview.

    Science.gov (United States)

    Bryan, John T.; Felty, J. Michael

    This paper is the second in a three-part series on SYS IV, an instructional management system developed by the PLATO Curriculum Project (PCP) that incorporates some of the features of the previous SYS systems. Focus is primarily on the new features that make the system unique. Following a brief background section explaining the purpose of SYS IV,…

  4. Understanding and Managing Conflict in a Technical Communication Department.

    Science.gov (United States)

    Leonard, David C.

    1993-01-01

    Defines conflict, looks at its causes, discusses the various types of organizational conflict, reviews the Myers-Briggs psychological types as they affect conflict, examines managers' typical reactions to internal and external conflict, and lists six keys to successful conflict resolution. (SR)

  5. Technical Evaluation Report 29: Integrated Learning Management Systems

    Directory of Open Access Journals (Sweden)

    Linda Schwartz

    2004-04-01

    Full Text Available Four integrated learning management packages were reviewed: CentraOne, IntraLearn, Lyceum, and Silicon Chalk. These products provide different combinations of synchronous and asynchronous tools. The current report examines the products in relation to their specific value for distance educators and students.

  6. Programme on Institutional Management in Higher Education. Technical Report.

    Science.gov (United States)

    Khan, Abdul G.; And Others

    University management is examined with regard to six major areas: decision and participation, finance, information, human flows, physical plant and equipment, and academic planning. Comprehensive long and medium term planning is proposed with the special feature of decentralized decision making. The issue of information requirements for managerial…

  7. Water management paradigms in Iran: technical, social and ethical aspects

    NARCIS (Netherlands)

    Balali, M.R.; Keulartz, F.W.J.; Korthals, M.J.J.A.A.

    2007-01-01

    In Iran, water scarcity is one of the main problems threatening food security. The country is confronted with the challenge to continue the expansion of food production to meet future demand without negative effects on the environment. To illuminate the problems and perspectives of water management

  8. Validity evidence of non-technical skills assessment instruments in simulated anaesthesia crisis management.

    Science.gov (United States)

    Jirativanont, T; Raksamani, K; Aroonpruksakul, N; Apidechakul, P; Suraseranivongse, S

    2017-07-01

    We sought to evaluate the validity of two non-technical skills evaluation instruments, the Anaesthetists' Non-Technical Skills (ANTS) behavioural marker system and the Ottawa Global Rating Scale (GRS), to apply them to anaesthesia training. The content validity, response process, internal structure, relations with other variables and consequences were described for validity evidence. Simulated crisis management sessions were initiated during which two trained raters evaluated the performance of postgraduate first-, second- and third-year (PGY-1, PGY-2 and PGY-3) anaesthesia residents. The study included 70 participants, composed of 24 PGY-1, 24 PGY-2 and 22 PGY-3 residents. Both instruments differentiated the non-technical skills of PGY-1 from PGY-3 residents (P technical skills in a simulated anaesthesia setting, but the Ottawa GRS was more practical and had higher reliability.

  9. The CHPRC Groundwater and Technical Integration Support (Master Project) Quality Assurance Management Plan

    Energy Technology Data Exchange (ETDEWEB)

    Fix, N. J.

    2009-04-03

    The scope of the CH2M Hill Plateau Remediation Company, LLC (CHPRC) Groundwater and Technical Integration Support (Master Project) is for Pacific Northwest National Laboratory staff to provide technical and integration support to CHPRC. This work includes conducting investigations at the 300-FF-5 Operable Unit and other groundwater operable units, and providing strategic integration, technical integration and assessments, remediation decision support, and science and technology. The projects under this Master Project will be defined and included within the Master Project throughout the fiscal year, and will be incorporated into the Master Project Plan. This Quality Assurance Management Plan provides the quality assurance requirements and processes that will be followed by the CHPRC Groundwater and Technical Integration Support (Master Project) and all releases associated with the CHPRC Soil and Groundwater Remediation Project. The plan is designed to be used exclusively by project staff.

  10. Examining the Impact of Non-Technical Security Management Factors on Information Security Management in Health Informatics

    Science.gov (United States)

    Imam, Abbas H.

    2013-01-01

    Complexity of information security has become a major issue for organizations due to incessant threats to information assets. Healthcare organizations are particularly concerned with security owing to the inherent vulnerability of sensitive information assets in health informatics. While the non-technical security management elements have been at…

  11. Examining the Impact of Non-Technical Security Management Factors on Information Security Management in Health Informatics

    Science.gov (United States)

    Imam, Abbas H.

    2013-01-01

    Complexity of information security has become a major issue for organizations due to incessant threats to information assets. Healthcare organizations are particularly concerned with security owing to the inherent vulnerability of sensitive information assets in health informatics. While the non-technical security management elements have been at…

  12. Technical Management in an Age of Openness: The Political, Public, and Environmental Forest Ranger

    Science.gov (United States)

    Anderson, Sarah E.; Hodges, Heather E.; Anderson, Terry L.

    2013-01-01

    Modern bureaucracy faces trade-offs between public and congressional input and agency expertise. The U.S. Forest Service offers an opportunity to quantitatively analyze whether an agency that is required to be more open to the public and congressional input will be forced to ignore its technical expertise in managing resources. This study uses…

  13. DOE Handbook: Guide to good practices for training of technical staff and managers

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-01-01

    Training programs at DOE facilities should prepare personnel to safely and efficiently operate the facilities in accordance with DOE requirements. This guide contains information that can be used to develop or validate training programs for technical staff and managers at DOE nuclear facilities. Training programs based on the content of this guide should provide assurance that these personnel perform their jobs safely and competently.

  14. Improving Technical Information Use: What Can Be Learnt from a Manager's Perspective?

    Science.gov (United States)

    Jacobson, C.; Lisle, A.; Carter, R. W.; Hockings, M. T.

    2013-07-01

    Conservation practice reportedly suffers from low use of technical information. Understanding of factors that affect the influence of technical information on management decision-making is limited. We sought to identify leverage points for improved technical information dissemination in the New South Wales Parks and Wildlife Service, Australia, given the significant recent investments in monitoring and evaluation that had been made. We did so by exploring the inter-relationships between factors affecting the influence of different information types on management decisions. Results indicate that managers have a high inclination toward adaptive behavior, given they operate in an information poor environment. The most influential types of information were those that enabled interaction between information provider and recipient (e.g., staff experience and expertise). An analysis of the concordance in individuals' responses for different information types showed that neither accessibility nor organizational expectation of use was aligned with influence on decision-making. Alignment of responses also varied by work area. Raising expectations of information use or increasing access to particular types of information is therefore unlikely to result in an increase in influence on management decision-making. Rather than focussing on matching accessibility and expected use of particular information types, our results indicate that technical information uptake is best supported through existing peer networks tailored to specific work areas.

  15. The intellectual information system for management of geological and technical arrangements during oil field exploitation

    Science.gov (United States)

    Markov, N. G.; Vasilyeva, E. E.; Evsyutkin, I. V.

    2017-01-01

    The intellectual information system for management of geological and technical arrangements during oil fields exploitation is developed. Service-oriented architecture of its software is a distinctive feature of the system. The results of the cluster analysis of real field data received by means of this system are shown.

  16. An audit questionnaire that examines specifically the management of technical activities clauses in ISO 15189.

    Science.gov (United States)

    Hartley, T F

    2010-01-01

    The aim of this study was to design an audit questionnaire that focuses on the management of the technical activities in a Diagnostic Pathology Laboratory. The ISO 15189 Standard is written in such a way that it continually moves back and forth from topics where the auditor needs to question bench level staff, to topics where the auditor needs to question Technical Management Staff. This makes for a disjointed audit process - both Bench Staff and Technical Managers are repeatedly interrupted. The solution was to do a clause by clause analysis of the Standard and assign the major responsibility for the compliance to each clause to either Technical Managers or Bench Staff. The Clauses were then grouped under four topic headings regardless of whether they were a Section 4 or Section 5 Clause. Two questionnaires have emerged - the one described in this work and one directed primarily towards the activities of bench staff. There are 95 questions and it takes approximately two hours to complete.

  17. Land and water management paradigms in Iran: technical, social and ethical aspects

    NARCIS (Netherlands)

    Balali, M.R.; Keulartz, F.W.J.; Korthals, M.J.J.A.A.

    2007-01-01

    With respect to land and water management in Iran, three paradigms can be distinguished. The pre-modern paradigm can be characterised by its key technical system (the `qanat¿ underground irrigation system), its main social institution (the `buneh¿ cooperative organisation of agricultural production)

  18. Succession Planning for Management Staff at a Western Canadian Postsecondary Technical Institute.

    Science.gov (United States)

    Cembrowski, Barbara Joan; da Costa, Jose L.

    This study used naturalistic inquiry to gain an understanding of how managerial personnel perceived career development and succession planning at a postsecondary technical institute in Canada. A total of nine individuals in three different career development stages completed semistructured interviews. It was found that managers perceived the…

  19. Precision Departure Release Capability (PDRC): NASA to FAA Research Transition

    Science.gov (United States)

    Engelland, Shawn; Davis, Thomas J.

    2013-01-01

    After takeoff, aircraft must merge into en route (Center) airspace traffic flows which may be subject to constraints that create localized demand-capacity imbalances. When demand exceeds capacity, Traffic Management Coordinators (TMCs) and Frontline Managers (FLMs) often use tactical departure scheduling to manage the flow of departures into the constrained Center traffic flow. Tactical departure scheduling usually involves use of a Call for Release (CFR) procedure wherein the Tower must call the Center to coordinate a release time prior to allowing the flight to depart. In present-day operations release times are computed by the Center Traffic Management Advisor (TMA) decision support tool based upon manual estimates of aircraft ready time verbally communicated from the Tower to the Center. The TMA-computed release time is verbally communicated from the Center back to the Tower where it is relayed to the Local controller as a release window that is typically three minutes wide. The Local controller will manage the departure to meet the coordinated release time window. Manual ready time prediction and verbal release time coordination are labor intensive and prone to inaccuracy. Also, use of release time windows adds uncertainty to the tactical departure process. Analysis of more than one million flights from January 2011 indicates that a significant number of tactically scheduled aircraft missed their en route slot due to ready time prediction uncertainty. Uncertainty in ready time estimates may result in missed opportunities to merge into constrained en route flows and lead to lost throughput. Next Generation Air Transportation System plans call for development of Tower automation systems capable of computing surface trajectory-based ready time estimates. NASA has developed the Precision Departure Release Capability (PDRC) concept that improves tactical departure scheduling by automatically communicating surface trajectory-based ready time predictions and

  20. Technical Potential for Peak Load Management Programs in New Jersey

    Energy Technology Data Exchange (ETDEWEB)

    Kirby, B.J.

    2002-12-13

    producers and consumers. Fortunately too, only a percentage of loads need to respond elastically for all customers to benefit. This report explores mechanisms to reduce, when necessary, the peak load in New Jersey's electricity market. It examines load pricing and technical load reduction programs used in recent years in New Jersey and discuss how they can be made more effective in controlling summer peaks and attendant high prices of electricity. Particular attention is given to load curtailment programs now in place and utility opinions relating to them.

  1. Life cycle assessment of waste management systems: Assessing technical externalities

    DEFF Research Database (Denmark)

    Brogaard, Line Kai-Sørensen

    from the LCAs of full waste management systems revealed that capital goods should be included in future LCAs. The impact share of capital goods was highest for resource depletion and the impacts of toxicity on humans and ecosystems. To evaluate the quality and consistency of available data...... for the primary and secondary production of materials, 366 datasets were gathered. The materials in focus were: paper, newsprint, cardboard, corrugated board, glass, aluminium, steel and plastics (HDPE, LDPE, LLDPE, PET, PS, PVC). Only one quarter of these data concerned secondary production, thus underlining...... a severe lack of data for these production processes. The results showed large variations in CO2 emissions from the production of each of the evaluated materials. An evaluation of the data revealed that energy systems are central to impacts and are thereby important to specify as background information...

  2. Technical inadequacies of peripheral contrast-enhanced magnetic resonance angiography: incidence, causes and management strategies

    Energy Technology Data Exchange (ETDEWEB)

    Low, G. [Department of Radiology, Hairmyres Hospital, East Kilbride (United Kingdom); Mizzi, A. [Department of Radiology, Hairmyres Hospital, East Kilbride (United Kingdom)]. E-mail: adrianmizzi@yahoo.co.uk; Ong, K. [Department of Radiology, Hairmyres Hospital, East Kilbride (United Kingdom); Lau, P.F. [Department of Radiology, Hairmyres Hospital, East Kilbride (United Kingdom); McKinstery, J. [Department of Radiology, Hairmyres Hospital, East Kilbride (United Kingdom)

    2006-11-15

    Aim: To assess the incidence, causes and effects of technical inadequacies in peripheral contrast-enhanced magnetic resonance angiography (CE-MRA) and to discuss relevant management strategies. Materials and methods: A retrospective analysis of 249 peripheral CE-MRA examinations was performed using the radiology department's RIS/PACS (radiology information system/picture archiving and communication system) database. All failed or technically inadequate MRAs were reviewed. In cases that underwent further imaging by conventional angiography (CA), we assessed if relevant arterial disease had been masked on the MRA. Results: Of the 249 examinations, 215 (86.3%) were technically satisfactory while 34 (13.7%) were a combination of technical inadequacies [29 cases (11.6%)] and examination failures [five cases (2%)]. The causes of technical inadequacies were: (1) venous contamination (13 cases; 5.2%), (2) motion-induced subtraction artefact (eight cases; 3.2%), (3) stent-induced artefact (four cases; 1.6%), (4) inadequate scan coverage (two cases; 0.8%), and (5) contrast timing error (two cases; 0.8%). The causes of failed examinations were: (1) inability to tolerate lying in the scanner (three cases; 1.2%) and (2) inability to fit into the scanner (two cases; 0.8%). Fifteen (44.1%) of the 34 cases underwent further imaging by CA, and in eight of these there was significant arterial disease that was missed on the MRA. Conclusion: Technical inadequacies occur in a small but significant proportion of peripheral CE-MRAs and can mask significant arterial disease. Knowledge of the potential causes of technical problems and the relevant management options is important for quality assurance and for limiting the need for an alternative investigation.

  3. Assessment of Proposed Cab Glass Coating for FAA Control Towers

    Science.gov (United States)

    2015-11-16

    To) Jun 2012 – Jun 2013 4. TITLE AND SUBTITLE Evaluation of Proposed Cab Glass Coating for FAA Control Towers 5a. CONTRACT NUMBER In- House 5b...Lite 2: 12CL N/A C 12"x12"x1 1/2" Insulated; 1/2" STARPHIRE; .060 CLEAR PVB; 1/2" STARPHIRE Bubble Pack Sheet Stuck to Surface N/A D 12...determine if this improvement (if any) degrades over time. Participants: In- house Wright-Patterson personnel and/or FAA-provided “guest

  4. An SNMP-based solution to enable remote ISO/IEEE 11073 technical management.

    Science.gov (United States)

    Lasierra, Nelia; Alesanco, Alvaro; García, José

    2012-07-01

    This paper presents the design and implementation of an architecture based on the integration of simple network management protocol version 3 (SNMPv3) and the standard ISO/IEEE 11073 (X73) to manage technical information in home-based telemonitoring scenarios. This architecture includes the development of an SNMPv3-proxyX73 agent which comprises a management information base (MIB) module adapted to X73. In the proposed scenario, medical devices (MDs) send information to a concentrator device [designated as compute engine (CE)] using the X73 standard. This information together with extra information collected in the CE is stored in the developed MIB. Finally, the information collected is available for remote access via SNMP connection. Moreover, alarms and events can be configured by an external manager in order to provide warnings of irregularities in the MDs' technical performance evaluation. This proposed SNMPv3 agent provides a solution to integrate and unify technical device management in home-based telemonitoring scenarios fully adapted to X73.

  5. The Socio-Technical Aspects of Water Management: Emerging Trends at Grass Roots Level in Uzbekistan

    Directory of Open Access Journals (Sweden)

    Peter P. Mollinga

    2010-02-01

    Full Text Available In Soviet times, water management was presented generally as a technical issue to be taken care of by the state water bureaucracy. Due to structural changes in agriculture in the two decades post-independence, irrigation water management has become an explicitly political and social issue in Central Asia. With the state still heavily present in the regulation of agricultural production, the situation in Uzbekistan differs from other post-communist states. Water management strategies are still strongly ‘Soviet’ in approach, regarded by state actors as purely ‘technical’, because other dimensions – economic, social and political – are ‘fixed’ through strong state regulation. However, new mechanisms are appearing in this authoritarian and technocratic framework. The application of a framework for socio-technical analysis in some selected Water Users’ Associations (WUAs in northwest Uzbekistan’s Khorezm region shows that the WUAs are becoming arenas of interaction for different interest groups involved in water management. The socio-technical analysis of Khorezm’s water management highlights growing social differences at grass root level in the study of WUAs. The process of social differentiation is in its early phases, but is still able to express itself fully due to the strict state control of agriculture and social life in general.

  6. Socio-technical aspects of the use of health related personal information for management and research.

    Science.gov (United States)

    Iversen, K R; Grøtan, T O

    1996-10-01

    This paper focuses on the organisational, technical and ethical aspects related to the use of person identifiable health information for various health care management, administration, finance, research and educational purposes. It is based on the ethical standpoint that to the individuals in question, the identifiable health information represents the uttermost sensitive and critical information. In addition, nobody, possibly apart from the patients themselves, may claim ownership of such information. Thus identifiable health information should be (per individual) kept as collected and protected as possible, within the scope of the patient provider relationship. Identifiable health information should, whenever possible and reasonable, be restricted to the health care professionals providing the treatment and care to the patient, and only be made available to others, e.g. for management, research or educational purposes, either in anonymous or pseudonymous form. Secure information management (SIM) is presented as the socio-technical means to facilitate our ethical standpoint in a practical health care environment.

  7. Temporal lobotomy in the surgical management of epilepsy: technical report.

    Science.gov (United States)

    Smith, Joseph R; VanderGriff, Alex; Fountas, Kostas

    2004-06-01

    To describe the technique of temporal lobotomy and demonstrate that it may produce results equivalent to anterior temporal lobectomy in the control of drug-resistant complex partial seizures of anterior temporal lobe origin. Patient selection and evaluation was similar to that for other patients undergoing anterior temporal lobectomy, with the exception that the 10 selected patients all demonstrated extensive lobar or hemispheral atrophy on magnetic resonance imaging or computed tomographic scans. The lobotomy technique involved posterior and superior disconnection, each of which was broken down into lateral and mesial components. At last follow-up, seven patients were seizure-free, one had rare seizures, and two had a less than 90% decrease in seizures. These outcomes are similar to those in our overall temporal lobectomy series. One patient who underwent left-sided temporal lobotomy had a speech fluency deficit postoperatively. Temporal lobotomy seems to be an effective disconnective procedure in the treatment of drug-resistant temporal lobe epilepsy. Larger series will be needed to better define its role in the management of this condition.

  8. [NASA/DOD Aerospace Knowledge Diffusion Research Project. Report 3:] Technical communications in aeronautics: Results of an exploratory study. An analysis of profit managers' and nonprofit managers' responses

    Science.gov (United States)

    Pinelli, Thomas E.; Glassman, Myron; Barclay, Rebecca O.; Oliu, Walter E.

    1989-01-01

    Data collected from an exploratory study concerned with the technical communications practices of aerospace engineers and scientists were analyzed to test the primary assumption that profit and nonprofit managers in the aerospace community have different technical communications practices. Five assumptions were established for the analysis. Profit and nonprofit managers in the aerospace community were found to have different technical communications practices for one of the five assumptions tested. It was, therefore, concluded that profit and nonprofit managers in the aerospace community do not have different technical communications practices.

  9. Final priority; Technical Assistance on State Data Collection--IDEA Data Management Center. Final priority.

    Science.gov (United States)

    2014-08-05

    The Assistant Secretary for the Office of Special Education and Rehabilitative Services (OSERS) announces a priority under the Technical Assistance on State Data Collection program. The Assistant Secretary may use this priority for competitions in fiscal year (FY) 2014 and later years. We take this action to fund a cooperative agreement to establish and operate an IDEA Data Management Center (Center) that will provide technical assistance (TA) to improve the capacity of States to meet the data collection requirements of the Individuals with Disabilities Education Act (IDEA).

  10. The Consequences of the FAA not Offering Emergency Agricultural UAS Rules for Water Conservation During the 2012 Drought

    Science.gov (United States)

    Darling, R. G.

    2016-12-01

    The FAA's policies for agricultural Unmanned Aerial Systems (UAS) is essential towards preservation and optimization of water use in the parched Western United States. Had FAA applied emergency rules putting farmers on equal-footing with hobbyists for sUAS use at the beginning of the 2012 drought, the Western US could have been able to save approximately 3 Million/AF of water through improved irrigation management. For perspective, Los Angeles city's annual current consumption is 587,000 acre-feet. This study uses various assumptions about developed water use in agriculture and urban areas to determine water use, energy consumption, monetary loss through delay in FAA regulations. If the saved water was added to the ground the energy savings could have been approximately 1.27 Terra-Watt hours, enough energy to power the entire University of California system for 5 years. It remains unclear if new FAA regulations are sufficiently permissive to allow for widespread adoption of sUAS based precision agriculture. Substantial opportunities exist for utilizing UAS traffic management software in rural areas of less crowed airspace: incorporating geofencing and a notification system to operators and air traffic control as an alternative to a difficult examination process.

  11. Native American Technical Assistance and Training for Renewable Energy Resource Development and Electrical Generation Facilities Management

    Energy Technology Data Exchange (ETDEWEB)

    A. David Lester

    2008-10-17

    The Council of Energy Resource Tribes (CERT) will facilitate technical expertise and training of Native Americans in renewable energy resource development for electrical generation facilities, and distributed generation options contributing to feasibility studies, strategic planning and visioning. CERT will also provide information to Tribes on energy efficiency and energy management techniques.This project will provide facilitation and coordination of expertise from government agencies and private industries to interact with Native Americans in ways that will result in renewable energy resource development, energy efficiency program development, and electrical generation facilities management by Tribal entities. The intent of this cooperative agreement is to help build capacity within the Tribes to manage these important resources.

  12. Native American Technical Assistance and Training for Renewable Energy Resource Development and Electrical Generation Facilities Management

    Energy Technology Data Exchange (ETDEWEB)

    A. David Lester

    2008-10-17

    The Council of Energy Resource Tribes (CERT) will facilitate technical expertise and training of Native Americans in renewable energy resource development for electrical generation facilities, and distributed generation options contributing to feasibility studies, strategic planning and visioning. CERT will also provide information to Tribes on energy efficiency and energy management techniques.This project will provide facilitation and coordination of expertise from government agencies and private industries to interact with Native Americans in ways that will result in renewable energy resource development, energy efficiency program development, and electrical generation facilities management by Tribal entities. The intent of this cooperative agreement is to help build capacity within the Tribes to manage these important resources.

  13. The Role of Formal Education, Technical and Management Training on Information Systems (IS) Managers' Managerial Effectiveness as Perceived by Their Subordinates

    Science.gov (United States)

    Ligon, Jerry; Abdullah, ABM; Talukder, Majharul

    2007-01-01

    This study examined the relationship between Information Systems (IS) managers' formal education, level of technical and managerial training and their managerial effectiveness as perceived by their subordinates. The study finds that there is a strong positive relationship between the amount of technical training IS managers have received and their…

  14. The Role of Formal Education, Technical and Management Training on Information Systems (IS) Managers' Managerial Effectiveness as Perceived by Their Subordinates

    Science.gov (United States)

    Ligon, Jerry; Abdullah, ABM; Talukder, Majharul

    2007-01-01

    This study examined the relationship between Information Systems (IS) managers' formal education, level of technical and managerial training and their managerial effectiveness as perceived by their subordinates. The study finds that there is a strong positive relationship between the amount of technical training IS managers have received and their…

  15. Improving the U.S. Navy's execution of technical authority through a common risk management and technical assessment process

    OpenAIRE

    Tomaiko, Thomas Andrew.

    2008-01-01

    The focus of this paper is on improving the U.S. Navy's execution of technical authority. 1. Technical authority targets compliance with technical criteria and standards. 2. This targeting must be done at the earliest stages of program development and addressed during development of the program acquisition strategy. 3. An executable acquisition strategy must take into consideration the Navy's technical authority responsibility. 4. A successful strategy needs to provide the industry suffic...

  16. Integrating Space Flight Resource Management Skills into Technical Lessons for International Space Station Flight Controller Training

    Science.gov (United States)

    Baldwin, Evelyn

    2008-01-01

    The Johnson Space Center s (JSC) International Space Station (ISS) Space Flight Resource Management (SFRM) training program is designed to teach the team skills required to be an effective flight controller. It was adapted from the SFRM training given to Shuttle flight controllers to fit the needs of a "24 hours a day/365 days a year" flight controller. More recently, the length reduction of technical training flows for ISS flight controllers impacted the number of opportunities for fully integrated team scenario based training, where most SFRM training occurred. Thus, the ISS SFRM training program is evolving yet again, using a new approach of teaching and evaluating SFRM alongside of technical materials. Because there are very few models in other industries that have successfully tied team and technical skills together, challenges are arising. Despite this, the Mission Operations Directorate of NASA s JSC is committed to implementing this integrated training approach because of the anticipated benefits.

  17. PDA Points to Consider: Technical Product Lifecycle Management Pharmaceutical Quality System Effectiveness For Managing Post-Approval Changes.

    Science.gov (United States)

    Ramnarine, Emma; Busse, Ursula; Chassant, Franck; Colao, Marcello; Edwards, Julia; O'Donnell, Kevin; Jornitz, Maik; Munk, Morten; Seymour, Melissa; Simianu, Mihaela; Skeens, Lisa; Vinther, Anders

    2017-02-14

    The International Council for Harmonisation Quality Guideline 10 (ICH Q10) describes the Pharmaceutical Quality System (PQS), indicating it is intended to apply throughout a product's lifecycle, in conjunction with good manufacturing practice (GMP) requirements, in order to achieve quality in a consistent and reproducible manner. Implementation of an effective PQS is essential for a company to achieve product realization, establish and maintain a state of control, and facilitate continual improvement (1). When changes are made during the commercial life of a product, an effective PQS, product and process understanding, and use of quality risk management should ensure that product quality, patient safety, and adequate supply to patients are maintained; this, according to ICH Q10-Annex 1, should provide companies the opportunity to manage post-approval changes (PAC) with reduced regulatory oversight (1). But what exactly constitutes an effective PQS? And how does it support change management for PACs? This paper intends to answer these questions and guide companies to seize the opportunities outlined in ICH Q10-Annex 1, to manage product and process changes within the PQS, and downgrade the level of regulatory submission required. This is the second of a series of PDA "Points to Consider" papers on technical product lifecycle management; the first paper focused on the technical product lifecycle management strategy including communication and knowledge exchange between Marketing Authorization Holders and Health Authorities.

  18. Places available - Technical management courses (up to the end of June 2016)

    CERN Multimedia

    2015-01-01

    Please find below the courses in the field of technical management scheduled up to the end of June 2016 and which have places available.     For more details about a course and to register, please go to the Training Catalogue. If you need a course that is not in the catalogue, please contact your supervisor, your Departmental Training Officer or the HR-LD group at Communication.Training@cern.ch.

  19. Design of Locally E-management System for Technical Education Foundation- Erbil

    OpenAIRE

    Ismaeel, Ayad Ghany; Mikhail, Dina Y.

    2014-01-01

    Until now, there is no e-management and automation necessary for the operations or procedures of the departments in the Technical Education Foundation Erbil, and the foundation like any other organization in Kurdistan region is not connected to the network, because there is not infrastructure for that purpose. To solve this problem, comes the proposal DLMS4TEF, which requirements are divided into hardware and software, as hardware will need Fast-Ethernet (LAN) technology to connect the depart...

  20. Places available - Technical management courses (up to the end of 2015)

    CERN Multimedia

    2015-01-01

    Please find below the courses in the field of technical management scheduled up to the end of 2015 and which have places available.     For more details about a course and to register, please go to the Training Catalogue. If you need a course that is not in the catalogue, please contact your supervisor, your Departmental Training Officer or the HR-LD group at Communication.Training@cern.ch.

  1. Places available - Technical management courses (up to the end of July)

    CERN Multimedia

    2015-01-01

    Please find below the courses in the field of technical management scheduled up to the end of July and which have places available.       For more details about a course and to register, please go to the Training Catalogue. If you need a course that is not in the catalogue, please contact your supervisor, your Departmental Training Officer or the HR-LD group at Communication.Training@cern.ch.

  2. Places available - Technical management courses (up to the end of 2015)

    CERN Multimedia

    2015-01-01

    Please find below the courses in the field of technical management scheduled up to the end of 2015 and which have places available.       For more details about a course and to register, please go to the Training Catalogue. If you need a course that is not in the catalogue, please contact your supervisor, your Departmental Training Officer or the HR-LD group at Communication.Training@cern.ch.

  3. Places available - Technical management courses (up to the end of 2015)

    CERN Multimedia

    2015-01-01

    Please find below the courses in the field of technical management scheduled up to the end of 2015 and which have places available.       For more details about a course and to register, please go to the Training Catalogue. If you need a course that is not in the catalogue, please contact your supervisor, your Departmental Training Officer or the HR-LD group at Communication.Training@cern.ch.

  4. Combining risk-management and computational approaches for trustworthiness evaluation of socio-technical systems

    OpenAIRE

    Gol Mohammadi, N.; Bandyszak, T.; Goldsteen, A.; Kalogiros, C.; Weyer, T.; Moffie, M.; Nasser, B.; Surridge, M

    2015-01-01

    The analysis of existing software evaluation techniques reveals the need for evidence-based evaluation of systems’ trustworthiness. This paper aims at evaluating trustworthiness of socio-technical systems during design-time. Our approach combines two existing evaluation techniques: a computa-tional approach and a risk management approach. The risk-based approach identifies threats to trustworthiness on an abstract level. Computational ap-proaches are applied to evaluate the expected end-to-en...

  5. Avoidable Technical and Clinical Denial Write-Off Management in Hospitals, Physician Offices, and Clinics.

    Science.gov (United States)

    Terra, Sandra Marlene; Byrne, Amanda

    2016-01-01

    This article reviews the various types of technical and clinical denials that are usually "written off" and proposes strategies to prevent this loss. For purposes of this writing, avoidable technical and clinical denial write-offs are defined as revenue lost from "first-pass" denials rejections. For example, a procedure that requires an authorization is performed without having had an authorization obtained. After appeals and attempts to recoup the revenue, often unsuccessful, the organization ultimately "writes off" the revenue as not collectable. The question to ask is: Are these claims really not collectable or can actionable steps be taken to conserve these dollars and improve the bottom line? Acute care hospitals, physician offices, and clinics. In today's environment, the need to manage costs is ubiquitous. Cost management is on the priority list of all savvy health care executives, even if margins are healthy, revenue is under pressure, and the magnitude of cost reduction needed is greater than what past efforts have achieved. As hospitals and physician clinics prioritize areas for improvement, reduction in lost revenue-especially avoidable lost revenue-should be at the top of the list. Attentively managing claim denial write-offs will significantly reduce lost revenue. There is significant interface between case management and the revenue cycle. Developing core competencies for reducing clinical and technical denials should be a critical imperative in overall cost management strategy. Case managers are well placed to prevent these unnecessary losses through accurate status determination and clinical documentation review. These clinical professionals can also provide insight into work flow and other processes inherent in the preauthorization process.

  6. United States Air Force Technical Order Acquisition. What Can Be Done to Improve the Effectiveness of the Technical Order Manager?

    Science.gov (United States)

    1985-09-01

    leveled CTOC framework, the following recommendations were made: 1. The establishment of a career field for senior TO acqusition personnel based on...capacity or another. The students were familiar with the terms and language normally associated with technical orders and were enrolled in Technical... acqusition is easy to learn; a background in the technical specialty is more important (ie. radio repair) - need more emphasis on logistics in general; TOs

  7. Highly Automated Arrival Management and Control System Suitable for Early NextGen

    Science.gov (United States)

    Swenson, Harry N.; Jung, Jaewoo

    2013-01-01

    This is a presentation of previously published work conducted in the development of the Terminal Area Precision Scheduling and Spacing (TAPSS) system. Included are concept and technical descriptions of the TAPSS system and results from human in the loop simulations conducted at Ames Research Center. The Terminal Area Precision Scheduling and Spacing system has demonstrated through research and extensive high-fidelity simulation studies to have benefits in airport arrival throughput, supporting efficient arrival descents, and enabling mixed aircraft navigation capability operations during periods of high congestion. NASA is currently porting the TAPSS system into the FAA TBFM and STARS system prototypes to ensure its ability to operate in the FAA automation Infrastructure. NASA ATM Demonstration Project is using the the TAPSS technologies to provide the ground-based automation tools to enable airborne Interval Management (IM) capabilities. NASA and the FAA have initiated a Research Transition Team to enable potential TAPSS and IM Technology Transfer.

  8. HANFORD SITE SOLID WASTE MANAGEMENT ENVIRONMENTAL IMPACT STATEMENT TECHNICAL INFORMATION DOCUMENT [SEC 1 THRU 4

    Energy Technology Data Exchange (ETDEWEB)

    FRITZ, L.L.

    2004-03-25

    This Technical Information Document (TID) provides engineering data to support DOE/EIS-0286, ''Hanford Site Solid (Radioactive and Hazardous) Waste Program Environmental Impact Statement''. Assumptions and waste volumes used to calculate engineering data are also provided in this document. This chapter provides a brief description of: the Solid Waste Management Program (including a description of waste types and known characteristics of waste covered under the program), the Hanford Site (including a general discussion of the operating areas), and the alternatives analyzed. The Hanford Site Solid Waste Management Program and DOE/EIS-0286 address solid radioactive waste types generated by various activities from both onsite and offsite generators. The Environmental Restoration (ER) waste management activities are not within the scope of DOE/EIS-0286 or this TID. Activities for processing and disposal of immobilized low-activity waste (ILAW) are not within the scope of the Solid Waste Management Program and this TID.

  9. Aircraft/Air Traffic Management Functional Analysis Model: Technical Description. 2.0

    Science.gov (United States)

    Etheridge, Melvin; Plugge, Joana; Retina, Nusrat

    1998-01-01

    The Aircraft/Air Traffic Management Functional Analysis Model, Version 2.0 (FAM 2.0), is a discrete event simulation model designed to support analysis of alternative concepts in air traffic management and control. FAM 2.0 was developed by the Logistics Management Institute (LMI) under a National Aeronautics and Space Administration (NASA) contract. This document provides a technical description of FAM 2.0 and its computer files to enable the modeler and programmer to make enhancements or modifications to the model. Those interested in a guide for using the model in analysis should consult the companion document, Aircraft/Air Traffic Management Functional Analysis Model, Version 2.0 Users Manual.

  10. Managing technical-institutional design processes: some strategic lessons from environmental co-operatives in the Netherlands

    NARCIS (Netherlands)

    Roep, D.; Ploeg, van der J.D.; Wiskerke, J.S.C.

    2003-01-01

    In this paper the case of the environmental co-operatives VEL and VANLA is reviewed in terms of coevolving technical and institutional change and the strategic lessons to be learned for a pro-active management of such complex technical-institutional design processes. Facing the many-sided crisis in

  11. Upgraded FAA Airfield Capacity Model Compiled from the Following Reports: FAA-RD-76-128 and FAA-EM-81-1-VOL-1

    Science.gov (United States)

    1981-05-01

    Arrival-Arrival Separations: DLTAIJ: 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 103 ** FAA CAPACITY MODEL - REVISED JANUARY, 1980 ** "t AIRFIELD HOURLY CAPACITY MODELO ...OLTEI:N1IIi Alifl1AL D1LAY rOi, z.rIrf XIJAL DEIIAjiD? 110- D’O YOU 1’ ISI ( TO FILIWRPNl ANOTHER1 CALCIAIVIO:1? 110! rIGU~n 6-3 (Cont.) 178 CHAPTER 7 - ON

  12. NASA,FAA,ONERA Swept-Wing Icing and Aerodynamics: Summary of Research and Current Status

    Science.gov (United States)

    Broeren, Andy

    2015-01-01

    NASA, FAA, ONERA, and other partner organizations have embarked on a significant, collaborative research effort to address the technical challenges associated with icing on large scale, three-dimensional swept wings. These are extremely complex phenomena important to the design, certification and safe operation of small and large transport aircraft. There is increasing demand to balance trade-offs in aircraft efficiency, cost and noise that tend to compete directly with allowable performance degradations over an increasing range of icing conditions. Computational fluid dynamics codes have reached a level of maturity that they are being proposed by manufacturers for use in certification of aircraft for flight in icing. However, sufficient high-quality data to evaluate their performance on iced swept wings are not currently available in the public domain and significant knowledge gaps remain.

  13. Technical-economic modelling of integrated water management: wastewater reuse in a French island.

    Science.gov (United States)

    Xu, P; Valette, F; Brissaud, F; Fazio, A; Lazarova, V

    2001-01-01

    An integrated technical-economic model is used to address water management issues in the French island of Noirmoutier. The model simulates potable water production and supply, potable and non potable water demand and consumption, wastewater collection, treatment and disposal, water storage, transportation and reuse. A variety of water management scenarios is assessed through technical, economic and environmental evaluation. The scenarios include wastewater reclamation and reuse for agricultural and landscape irrigation as well as domestic non potable application, desalination of seawater and brackish groundwater for potable water supply. The study shows that, in Noirmoutier, wastewater reclamation and reuse for crop irrigation is the most cost-effective solution to the lack of water resources and the protection of sensitive environment. Some water management projects which are regarded as having less economic benefit in the short-term may become competitive in the future, as a result of tightened environmental policy, changed public attitudes and advanced water treatment technologies. The model provides an appropriate tool for water resources planning and management.

  14. Depreciation Policy as a Key Element of Enterprise Technical Resources Management

    Directory of Open Access Journals (Sweden)

    Puyda Halya V.

    2014-01-01

    Full Text Available Depreciation policy and depreciation in particular play a number of functions at an enterprise. The modern stage of scientific studies describes the essence and breadth of the “depreciation” notion for an enterprise rather deeply. The article considers depreciation as a tool of managing technical resources at an enterprise. It conducts a critical review of modern approaches to determination of depreciation and identifies its functions. The author carries out a deep analysis of modern views on the existing concepts of depreciation essence and its place in managing enterprise assets. The article reveals the essence of the “depreciation policy” notion. It provides examples of influence of different types of the depreciation policy upon the state and rate of renovation of technical resources at an enterprise. In the result the author offers types of the depreciation policy of an enterprise depending on the desired rate of renovation of the technical base and desired volume of the capital released into circulation.

  15. First Annual FAA General Aviation Forecast Conference Proceedings

    Science.gov (United States)

    1991-03-01

    pilot’s perspective. I have a 30-year background as an executive in communications, principally in television , but I am also an aircraft owner and have...contrasting this with the business I came from -- television , which is gauged and governed by the TV rating business, which includes overnight ratings. We...ago following the Ceritos, California midair collision between a general aviation aircraft and a Mexicana airliner, the FAA released a study calling for

  16. The development of technical database of advanced spent fuel management process

    Energy Technology Data Exchange (ETDEWEB)

    Ro, Seung Gy; Byeon, Kee Hoh; Song, Dae Yong; Park, Seong Won; Shin, Young Jun

    1999-03-01

    The purpose of this study is to develop the technical database system to provide useful information to researchers who study on the back end nuclear fuel cycle. Technical database of advanced spent fuel management process was developed for a prototype system in 1997. In 1998, this database system is improved into multi-user systems and appended special database which is composed of thermochemical formation data and reaction data. In this report, the detailed specification of our system design is described and the operating methods are illustrated as a user's manual. Also, expanding current system, or interfacing between this system and other system, this report is very useful as a reference. (Author). 10 refs., 18 tabs., 46 fig.

  17. Materials and Chemistry Technical Program Management Team: Status report for FY-1987

    Energy Technology Data Exchange (ETDEWEB)

    Otey, M.G.; Saraceno, A.J.; Streetman, K.D.; Trowbridge, L.D.

    1987-12-28

    Significant activities of the Materials and Chemistry (M and C) Technical Program Management Team for FY-1987 are summarized. Major DOE Milestones for the fiscal year include: (1) trapping technology to further reduce airborne emissions (PGDP); (2) monitoring technology for purge cascade compounds (ORGDP); and (3) evaluation of technology for simultaneous monitoring of uranium and technetium in purge vents (Portsmouth). Brief descriptions of important day-to-day technical support activities for the sites are also presented. Other FY-1987 activities included: (1) A seminar on trapping technology held at Portsmouth on March 18, 1987. (2) Prioritization of FY-1988 PLRTS Project Listings. (3) Gaseous Diffusion Ultimate Potential (GDUP) brainstorming sessions. (4) Base FY-1988 Milestone on Resolution of One-Inch UF/sub 6/ Cylinder Valve problem. (5) Projection of Resource Requirements for FY-1988 to FY-1991.

  18. The influence of system interactivity and technical support on learning management system utilization

    Directory of Open Access Journals (Sweden)

    Sousan Baleghi-Zadeh

    2017-03-01

    Full Text Available In recent years, there has been a growing increase in using Learning Management System (LMS by universities. However, its utilization by students is limited in Malaysia. The main purpose of the present study is to develop and test a model that predicts LMS utilization by Malaysian higher education students. Based on the Technology Acceptance Model, the study investigated the relationships among six constructs (system interactivity, technical support, perceived ease of use, perceived usefulness, behavioral intention to use and LMS use through structural equation modelling. The participants were 216 undergraduate students from a local university in Malaysia. The result of the study revealed that system interactivity had a significant effect on perceived usefulness, but not on perceived ease of use; technical support had a significant effect on perceived ease of use, but not on perceived usefulness.

  19. Technical specification for the Product Evaluation Management Information System (PREMIS) Version 1. 1. 2

    Energy Technology Data Exchange (ETDEWEB)

    Eaton, D.S.; Hall, R.C.; Orman, J.L.; Klamerus, J.

    1990-06-01

    This document contains the technical specifications and implementation details for the Product Evaluation Management Information System (PREMIS) Version 1.1.2. This document does not include the requirements analysis or design information and is not intended as a user's guide. The INGRES Applications-by-Forms (ABF) software development tool was used to specify and define the modules and screens which comprise the PREMIS application. Several external procedures are called by the ABF procedures; these have been written in VAX/VMS DCL (Digital Command Language) and SQL (Standard Query Language). These specifications together with the PREMIS information model and corresponding database definition constitute the PREMIS Version 1.1.2 technical specification and implementation description presented herein.

  20. A strategy to improve skills in pharmaceutical supply management in East Africa: the regional technical resource collaboration for pharmaceutical management.

    Science.gov (United States)

    Matowe, Lloyd; Waako, Paul; Adome, Richard Odoi; Kibwage, Isaac; Minzi, Omary; Bienvenu, Emile

    2008-12-23

    International initiatives such as the Global Fund to Fight AIDS, Tuberculosis and Malaria, the President's Emergency Plan for AIDS Relief and the President's Malaria Initiative have significantly increased availability and access to medicines in some parts of the developing world. Despite this, however, skills remain limited on quantifying needs for medications and ordering, receiving and storing medications appropriately; recording medications inventories accurately; distributing medications for use appropriately; and advising patients on how to use medications appropriately. The Regional Technical Resource Collaboration for Pharmaceutical Management (RTRC) has been established to help address the problem of skills shortage in pharmaceutical management in East Africa. The initiative brings together academic institutions from four East African countries to participate in skills-building activities in pharmaceutical supply management. The initiative targeted the institutions' ability to conduct assessments of pharmaceutical supply management systems and to develop and implement effective skills-building programmes for pharmaceutical supply chain management. Over a two-year period, the RTRC succeeded in conducting assessments of pharmaceutical supply management systems and practices in Kenya, Rwanda, Tanzania and Uganda. In 2006, the RTRC participated in a materials-development workshop in Kampala, Uganda, and contributed to the development of comprehensive HIV/AIDS pharmaceutical management training materials; these materials are now widely available in all four countries. In Tanzania and Uganda the RTRC has been involved with the training of health care workers in HIV/AIDS pharmaceutical management. In Kenya, Tanzania and Uganda the RTRC has been conducting operations research to find solutions to their countries' skills-shortage problems. Some of the interventions tested include applying and evaluating the effectiveness of a novel skills-building approach for

  1. A strategy to improve skills in pharmaceutical supply management in East Africa: the regional technical resource collaboration for pharmaceutical management

    Directory of Open Access Journals (Sweden)

    Minzi Omary

    2008-12-01

    Full Text Available Abstract Background International initiatives such as the Global Fund to Fight AIDS, Tuberculosis and Malaria, the President's Emergency Plan for AIDS Relief and the President's Malaria Initiative have significantly increased availability and access to medicines in some parts of the developing world. Despite this, however, skills remain limited on quantifying needs for medications and ordering, receiving and storing medications appropriately; recording medications inventories accurately; distributing medications for use appropriately; and advising patients on how to use medications appropriately. The Regional Technical Resource Collaboration for Pharmaceutical Management (RTRC has been established to help address the problem of skills shortage in pharmaceutical management in East Africa. Methods The initiative brings together academic institutions from four East African countries to participate in skills-building activities in pharmaceutical supply management. The initiative targeted the institutions' ability to conduct assessments of pharmaceutical supply management systems and to develop and implement effective skills-building programmes for pharmaceutical supply chain management. Results Over a two-year period, the RTRC succeeded in conducting assessments of pharmaceutical supply management systems and practices in Kenya, Rwanda, Tanzania and Uganda. In 2006, the RTRC participated in a materials-development workshop in Kampala, Uganda, and contributed to the development of comprehensive HIV/AIDS pharmaceutical management training materials; these materials are now widely available in all four countries. In Tanzania and Uganda the RTRC has been involved with the training of health care workers in HIV/AIDS pharmaceutical management. In Kenya, Tanzania and Uganda the RTRC has been conducting operations research to find solutions to their countries' skills-shortage problems. Some of the interventions tested include applying and evaluating the

  2. Technical efficiency and management factors in plantain production in humid forest zone of Nigeria: A simulation analysis

    Directory of Open Access Journals (Sweden)

    DO Awotide

    2014-10-01

    Full Text Available The paper investigated the effect of changing some management factors on technical efficiency in plantain production with a view to understanding the functional relationship between technical efficiency and agricultural productivity. Data were r collected from a cross-sectional survey of two local government areas and six villages in Ibadan area of Oyo State in the humid forest zone of Nigeria. Stochastic frontier and multiple regression models were fitted and a simulation analysis was carried out on the management levels of plantain farmers. The results revealed that educational level alone did not significantly influence technical efficiency but its combination with extension assistance significantly influenced technical efficiency in the study area. Periodic extension assistance received significantly influenced technical efficiency.

  3. Risk management in the oil and gas industry : integration of human, organisational and technical factors

    Energy Technology Data Exchange (ETDEWEB)

    Skogdalen, Jon Espen

    2011-07-01

    The overall objective of this thesis is to provide knowledge and tools for the major hazard risk assessment for offshore installations (and onshore plants) based on an improved understanding of the influence of organisational, human and technical (OMT) factors. This extensive objective was further described by the following sub-goals: 1. Identify and describe human and organisational barriers in risk analysis, 2. Provide knowledge regarding human, organisational and technical factors that influence safety barriers, 3. Define indicators that are suitable for the measurement of barrier performance, 4. Develop models for barrier performance reflecting human, organisational and technical factors These four sub-goals formed the basis for the more specific objectives in the articles. The Deepwater Horizon accident and Macondo blowout were important inputs for several of the articles. One important acknowledgement is that risk management of major hazards differs from managing occupational safety. Another is that managing risks in the oil and gas (O&G) industry demands a high level due to the potential severe consequences. Quantitative risk analyses/assessments (QRAs) are used for risk control in the O&G industry. An important part of the QRA process is to identify and describe barriers in risk analysis. A study of offshore QRAs (Skogdalen and Vinnem, 2011b) showed that there were large differences between the analyses regarding incorporation of human and organisational factors (HOFs). The study divided the QRAs into a four-level classification system. Level 1 QRAs did not describe or comment on HOFs at all. By contrast, relevant research projects were conducted to fulfil the requirements of level 3 analyses. At this level, there was a systematic collection of data related to HOFs. The methods for analyzing the data were systematic and documented, and the QRAs were adjusted according to the status of the HOFs. A second study of QRAs (Skogdalen and Vinnem, 2011a) revealed

  4. Establishing a scientific and technical information program: Planning and resource management

    Science.gov (United States)

    Blados, Walter R.

    1992-01-01

    In the last 50 years, technological advances have accelerated at a rate unprecedented in history. We are experiencing a tremendous expansion of scientific and technological effort in many directions, and the result is a fantastic increase in the accumulation of scientific and technical information (STI) and knowledge. An integral part of the research and development (R&D) process is the STI associated with it. STI is both a raw material (input) and a product (output) of this process. The topics addressed include the following: the value of STI, management of an STI program, program policy and guidance, organizational structure, data sources, training/orientation, and the current information environment.

  5. Thirteenth annual report of the Technical Advisory Committee on the Nuclear Fuel Waste Management Program

    Energy Technology Data Exchange (ETDEWEB)

    1993-05-15

    This report details activities since the last reporting period by the Technical Advisory Committee (TAC). The emphasis of the work in the Canadian Nuclear Fuel Waste Management Program (CNFWMP) has been on the writing of the Environmental Impact Statement (EIS) and the associated set of the primary reference document as well as supporting documents. These are in preparation for submission to the Environmental Assessment Review Panel who will lead the national evaluation of the disposal concept under the auspices of the Federal Environmental Assessment Review Office (FEARO).

  6. Materials and Chemistry Technical Program Management Team status report for FY-1988

    Energy Technology Data Exchange (ETDEWEB)

    Otey, M.G.; Saraceno, A.J.; Trowbridge, L.D.

    1989-01-01

    This report documents significant FY-1988 activities of the Materials and Chemistry (M and C) Technical Program Management Team. A Major DOE Milestone for the fiscal year dealt with successful resolution of the one-inch UF/sub 6/ cylinder valve problem. Site milestones included (1) trapping technology to further reduce airborne emissions, (2) cooling system chemistry support, (3) monitoring of purge cascade chemistry, (4) cascade retained inventory support, (5) chemistry of UF/sub 6/-metal reactions, and (6) studies on UF/sub x//UO/sub 2/F/sub 2/ cascade chemistry.

  7. Just In Time Value Chain Total Quality Management Part Of Technical Strategic Management Accounting

    Directory of Open Access Journals (Sweden)

    Lesi Hertati

    2015-08-01

    Full Text Available This article aims to determine Just In Time Value Chain Total Quality Management tqm as a technique in management accounting stategis.Tujuan Just In Time value chain or value chain Total Quality Management TQM is strategic for customer satisfaction in the long term obtained from the information. Quality information is the way to continuous improvement in order to increase the companys financial performance in the long term to increase competitive advantage. Strategic Management Accounting process gather competitor information explore opportunities to reduce costs integrate accounting with emphasis on the strategic position of the competition is a great plan. An overall strategic plan interrelated and serves as the basis for achieving targets or goals ahead.

  8. The Acyl-CoA synthetases encoded within FAA1 and FAA4 in Saccharomyces cerevisiae function as components of the fatty acid transport system linking import, activation, and intracellular Utilization

    DEFF Research Database (Denmark)

    Færgeman, Nils J.; Black, P N; Zhao, X D

    2001-01-01

    Exogenous long-chain fatty acids are activated to coenzyme A derivatives prior to metabolic utilization. In the yeast Saccharomyces cerevisiae, the activation of these compounds prior to metabolic utilization proceeds through the fatty acyl-CoA synthetases Faa1p and Faa4p. Faa1p or Faa4p are esse...

  9. Technical and management information system: The tool for professional productivity on the space station program

    Science.gov (United States)

    Montoya, G.; Boldon, P.

    1985-01-01

    The Space Station Program is highly complex not only in its technological goals and requirements but also in its organizational structure. Eight Contractor teams supporting four NASA centers plus Headquarters must depend on effective exchange of information--the lifeblood of the program. The Technical and Management Information System (TMIS) is the means by which this exchange can take place. Value of the TMIS in increasing productivity comes primarily from its ability to make the right information available to whomever needs it when it is needed. Productivity of the aerospace professional and how it can be enhanced by the use of specifically recommended techniques and procedures for information management using the TMIS are discussed.

  10. Technical and management information system: The tool for professional productivity on the space station program

    Science.gov (United States)

    Montoya, G.; Boldon, P.

    1985-01-01

    The Space Station Program is highly complex not only in its technological goals and requirements but also in its organizational structure. Eight Contractor teams supporting four NASA centers plus Headquarters must depend on effective exchange of information--the lifeblood of the program. The Technical and Management Information System (TMIS) is the means by which this exchange can take place. Value of the TMIS in increasing productivity comes primarily from its ability to make the right information available to whomever needs it when it is needed. Productivity of the aerospace professional and how it can be enhanced by the use of specifically recommended techniques and procedures for information management using the TMIS are discussed.

  11. A Study of the Relationship between Personality Types and the Acceptance of Technical Knowledge Management Systems (TKMS)

    Science.gov (United States)

    Sullivan, Maureen S.

    2012-01-01

    Technical knowledge management systems (TKMSs) are not achieving the usage (acceptance) and the benefits that have been forecasted and are therefore, not enhancing competitive advantage and profits in organizations (Comb, 2004, "Assessing customer relationship management strategies for creating competitive advantage in electronic…

  12. A Study of the Relationship between Personality Types and the Acceptance of Technical Knowledge Management Systems (TKMS)

    Science.gov (United States)

    Sullivan, Maureen S.

    2012-01-01

    Technical knowledge management systems (TKMSs) are not achieving the usage (acceptance) and the benefits that have been forecasted and are therefore, not enhancing competitive advantage and profits in organizations (Comb, 2004, "Assessing customer relationship management strategies for creating competitive advantage in electronic…

  13. State Policies on Human Capital Resource Management: Minnesota. Human Capital Resource Management Technical Brief

    Science.gov (United States)

    Bhatt, Monica; Behrstock, Ellen; Cushing, Ellen; Wraight, Sara

    2010-01-01

    Training, recruiting, developing, and supporting talented and effective educators throughout their careers is known as human capital resource management (HCRM) in education. HCRM has been identified in recent literature as one of the ways in which districts and states may increase school effectiveness and improve student learning (Heneman &…

  14. State Policies on Human Capital Resource Management: Iowa. Human Capital Resource Management Technical Brief

    Science.gov (United States)

    Behrstock, Ellen; Bhatt, Monica; Cushing, Ellen; Wraight, Sara

    2010-01-01

    Training, recruiting, developing, and supporting talented and effective educators throughout their careers is known as human capital resource management (HCRM) in education. HCRM has been identified in recent literature as one of the ways in which districts and states may increase school effectiveness and improve student learning (Heneman &…

  15. State Policies on Human Capital Resource Management: Michigan. Human Capital Resource Management Technical Brief

    Science.gov (United States)

    Meyer, Cassandra; Bhatt, Monica; Wraight, Sara; Behrstock, Ellen; Cushing, Ellen

    2010-01-01

    Training, recruiting, developing, and supporting talented and effective educators throughout their careers is known as human capital resource management (HCRM) in education. HCRM has been identified in recent literature as one of the ways in which districts and states may increase school effectiveness and improve student learning (Heneman &…

  16. State Policies on Human Capital Resource Management: Illinois. Human Capital Resource Management Technical Brief

    Science.gov (United States)

    Meyers, Coby; Bhatt, Monica; Wraight, Sara; Behrstock, Ellen; Cushing, Ellen

    2010-01-01

    Training, recruiting, developing, and supporting talented and effective educators throughout their careers is known as human capital resource management (HCRM) in education. HCRM has been identified in recent literature as one of the ways in which districts and states may increase school effectiveness and improve student learning (Heneman &…

  17. State Policies on Human Capital Resource Management: Ohio. Human Capital Resource Management Technical Brief

    Science.gov (United States)

    Bhatt, Monica; Wraight, Sara; Behrstock, Ellen; Cushing, Ellen

    2010-01-01

    Training, recruiting, developing, and supporting talented and effective educators throughout their careers is known as human capital resource management (HCRM) in education. HCRM has been identified in recent literature as one of the ways in which districts and states may increase school effectiveness and improve student learning (Heneman &…

  18. State Policies on Human Capital Resource Management: Wisconsin. Human Capital Resource Management Technical Brief

    Science.gov (United States)

    Cushing, Ellen; Bhatt, Monica; Wraight, Sara; Behrstock, Ellen; Meyer, Cassandra

    2010-01-01

    Training, recruiting, developing, and supporting talented and effective educators throughout their careers is known as human capital resource management (HCRM) in education. HCRM has been identified in recent literature as one of the ways in which districts and states may increase school effectiveness and improve student learning (Heneman &…

  19. State Policies on Human Capital Resource Management: Indiana. Human Capital Resource Management Technical Brief

    Science.gov (United States)

    Meyer, Cassandra; Bhatt, Monica; Wraight, Sara; Behrstock, Ellen; Cushing, Ellen

    2010-01-01

    Training, recruiting, developing, and supporting talented and effective educators throughout their careers is known as human capital resource management (HCRM) in education. HCRM has been identified in recent literature as one of the ways in which districts and states may increase school effectiveness and improve student learning (Heneman &…

  20. Reflecting socio-technical combinations in radioactive waste management. Results from the InSOTEC European research project

    Energy Technology Data Exchange (ETDEWEB)

    Kallenbach-Herbert, Beate [Oeko-Institut e.V., Darmstadt (Germany); Bergmans, Anne [Antwerp Univ. (Belgium); Martell, Meritxell [Merience Strategic Thinking, Olerdola (Spain); Schroeder, Jantine [Antwerp Univ. (Belgium); SCK - CEN, Mol (Belgium)

    2015-07-01

    InSOTEC is a three-year collaborative social sciences research project funded under the European Atomic Energy Community's 7th Framework Programme FP7. The project aims to generate a better understanding of the complex interplay between the technical and the social in the context of geological disposal of radioactive waste. In doing so, InSOTEC has moved beyond the social and technical division that is frequently being found in this context by - investigating the consideration of social sciences and the recognition of socio-technical combinations in research programs on geological disposal, - analyzing the socio-technical entanglement in selected contexts like siting, reversibility and retrievability, demonstrating safety and technology transfer on the basis of case studies, and - exploring the integration of diverse stakeholders in technology oriented networks. The analyses reveal that activities in the context of geological disposal, whether related to research, planning, siting etc., rather support the divide of social and technical aspects than fostering the consideration of their entanglement. Reasons identified for this are manifold. The wish to reduce complexity by focusing stakeholder involvement on social questions and fixing the technical part ''when acceptance is reached'' is only one of them. However, the analyses also show that over the long timescales of repository planning and implementation, robust management strategies must provide the flexibility to adapt to both technical and social developments and demands. Understanding the socio-technical interplay and creating structures for its consideration provides the basis for dealing with this challenge. This presentation will focus on the main findings of the InSOTEC project with regard to the consideration of socio-technical combinations in practice. These insights are currently under development and will be finalized at the end of the project in June 2014. We will reflect on

  1. A technical investigation on tools and concepts for sustainable management of the subsurface in The Netherlands.

    Science.gov (United States)

    Griffioen, Jasper; van Wensem, Joke; Oomes, Justine L M; Barends, Frans; Breunese, Jaap; Bruining, Hans; Olsthoorn, Theo; Stams, Alfons J M; van der Stoel, Almer E C

    2014-07-01

    In response to increasing use of the subsurface, there is a need to modernise policies on sustainable use of the subsurface. This holds in particular for the densely populated Netherlands. We aimed to analyse current practice of subsurface management and the associated pressure points and to establish a conceptual overview of the technical issues related to sustainable management of the subsurface. Case studies on the exploitation of subsurface resources (including spatial use of the subsurface) were analysed, examining social relevance, environmental impact, pressure points and management solutions. The case studies ranged from constructing underground garages to geothermal exploitation. The following issues were identified for the technological/scientific aspects: site investigation, suitability, risk assessment, monitoring and measures in the event of failure. Additionally, the following general issues were identified for the administrative aspects: spatial planning, option assessment, precaution, transparency, responsibility and liability. These issues were explored on their technological implications within the framework of sustainable management of the subsurface. This resulted into the following key aspects: (1) sustainability assessment, (2) dealing with uncertainty and (3) policy instruments and governance. For all three aspects, different options were identified which might have a legal, economic or ethical background. The technological implications of these backgrounds have been identified. A set of recommendations for sustainable management of the subsurface resources (incl. space) was established: (1) management should be driven by scarcity, (2) always implement closed loop monitoring when the subsurface activities are high-risk, (3) when dealing with unknown features and heterogeneity, apply the precautionary principle, (4) responsibility and liability for damage must be set out in legislation and (5) sustainability should be incorporated in all

  2. Precision Departure Release Capability (PDRC) Overview and Results: NASA to FAA Research Transition

    Science.gov (United States)

    Engelland, Shawn; Davis, Tom.

    2013-01-01

    NASA researchers developed the Precision Departure Release Capability (PDRC) concept to improve the tactical departure scheduling process. The PDRC system is comprised of: 1) a surface automation system that computes ready time predictions and departure runway assignments, 2) an en route scheduling automation tool that uses this information to estimate ascent trajectories to the merge point and computes release times and, 3) an interface that provides two-way communication between the two systems. To minimize technology transfer issues and facilitate its adoption by TMCs and Frontline Managers (FLM), NASA developed the PDRC prototype using the Surface Decision Support System (SDSS) for the Tower surface automation tool, a research version of the FAA TMA (RTMA) for en route automation tool and a digital interface between the two DSTs to facilitate coordination.

  3. [NASA/DOD Aerospace Knowledge Diffusion Research Project. Report 2:] Technical communications in aeronautics: Results of an exploratory study. An analysis of managers' and nonmanagers' responses

    Science.gov (United States)

    Pinelli, Thomas E.; Glassman, Myron; Barclay, Rebecca O.; Oliu, Walter E.

    1989-01-01

    Data collected from an exploratory study concerned with the technical communications practices of aerospace engineers and scientists were analyzed to test the primary assumption that aerospace managers and nonmanagers have different technical communications practices. Five assumptions were established for the analysis. Aerospace managers and nonmanagers were found to have different technical communications practices for three of the five assumptions tested. Although aerospace managers and nonmanagers were found to have different technical communications practices, the evidence was neither conclusive nor compelling that the presumption of difference in practices could be attributed to the duties performed by aerospace managers and nonmanagers.

  4. Distributed, explicit modeling of technical snow production and ski area management with the hydroclimatological model AMUNDSEN

    Science.gov (United States)

    Hanzer, Florian; Marke, Thomas; Strasser, Ulrich

    2016-04-01

    In this presentation, a module for simulating technical snow production in ski areas coupled to the spatially distributed physically based hydroclimatological model AMUNDSEN is presented. The module explicitly considers individual snow guns and distributes the produced snow along the slopes. The amount of snow produced by each device is a function of its type, of wet-bulb temperature at the location, of ski area infrastructure (in terms of water supply and pumping capacity), and of snow demand. An empirical rule in the modeling for snow production, derived from common snowmaking practices, splits the winter season into a period of maximum snowmaking and a successive period of selective on-demand snowmaking. The model is exemplarily set up for a ski area in the Schladming region (Austrian Alps) using actual snowmaking infrastructure data. Integration of these data as model variables, as well as stakeholder-defined indicators and thresholds, have been implemented as defined interfaces in a coupled component model architecture. Comparison of the model results with recordings of snowmaking operation and satellite-derived snow cover maps indicate that the model is capable of accurately simulating the real-world snowmaking practice, and the combined natural and technical snow conditions on the slopes. The explicit consideration of individual snow guns and ski area infrastructure makes the model a valuable tool for scenario applications, e.g. to assess the effects of different ski area management strategies and changes in snowmaking infrastructure for climate change impact studies.

  5. Technical changes that would contribute to success in the civilian radioactive waste management program

    Energy Technology Data Exchange (ETDEWEB)

    Ramspott, L.D.

    1993-10-01

    Many changes have taken place since the SCP safety strategy was formulated; it needs to be revised or replaced. Four concepts would aid in the shift from a rigid, ecelctic, schedule-driven, all-or-nothing program to an incremental, evolving, and experimental but integrated program. These are a simple safety case, reversability, demonstrability, and decoupling operations of a repository from operation of reactors. A simple safety case based on containment can be made for a repository at Yucca Mountain. This containment strategy is based on the dryness of openings at Yucca Mountain, Extended Dry heat management, and long-lived containers. Reversibility is technically believable at Yucca Mountain because of extended retrievability and drift emplacement, if an MRS were co-located with the repository. Because the rock is unsaturated, extended retrievability is technically feasible at Yucca Mountain. Demonstrability could be improved at Yucca Mountain by planning for incremental progression toward operation and closure of a repository, possibly including a shift to underground retrievable storage. Demonstrability can also be improved by using natural analogs. Repository operation can be decoupled from reactor operation by use of an unconstrained MRS facility or at-reactor dry storage and multipurpose storage canister/casks.

  6. Efficiency potential of management and technical solutions for a construction object

    Directory of Open Access Journals (Sweden)

    Lapidus Azariy Abramovich

    2014-01-01

    Full Text Available The authors investigate the models of efficiency potential of management and technical solutions for a construction object, which allows accounting for the influence of management-technological and administrative solutions in the process of implementing construction project. The solutions are represented by various factors – solitary integral potentials. The factors, which should be taken into account in the process of developing an integral model, are: development of general contracting structure, project decisions, management decisions, administrative decisions and ecological impact. In is necessary to develop the model, which will integrally put together the above mentioned factors of a construction project, observe and investigate other factors, create a model and get the opportunity not only to predict the endpoint of the future construction object on the stage of formulating technological requirements, but also to monitor the changes of this prognosis in time. The parameters of the integral potential will allow the system to obtain flexibility, which makes it possible to adjust to the changes usually taking place on a construction object and at the same time to aim for optimization of organizational, technological and administrative solutions in the process of reaching endpoint of construction.

  7. Technical note: Rationale, development, use and evaluation of an equipment management and image storage system.

    Science.gov (United States)

    Klepper, J; Geiger, G

    1996-01-01

    Lack of space and organization have become significant problems in the contemporary business world. Modern industries must eliminate mountains of paper and better organize themselves. With the incorporation of a fully automated equipment management system and image storage system, the Jacobi Medical Center has succeeded in correcting these problems. This technical note shows how the use of computer software and hardware components can be integrated to manage electronic patient care equipment. The adoption of this new technology was applied to equipment maintenance, tracking and record-keeping, thereby accomplishing the aims of space conservation and organization. As the components became more advanced, the technology included computer software products that could store more information and electronically effect a more rapid document retrieval. This will eventually allow for a paperless operation. The latest available equipment management software is supported by an image storage system that may contain important signature documents and outside vendor information. The applicability of these systems to the biomedical engineering field is obvious: (a) space efficiency eliminates folders and files; (b) simultaneous technician access to equipment history; and (c) rapid archive retrieval of data as well as vendor information and safety alerts.

  8. The Social-Technical View of Knowledge Management in Services Industries

    Directory of Open Access Journals (Sweden)

    Choong K. Fatt

    2010-01-01

    Full Text Available Problem statement: This study investigated the social-technical view of knowledge management that supported a close social and technology relationship on automotive industry in Australia. It also examined the impacts of legacy EDI groupware technology as a mean to support knowledge management in providing value creation for an automotive company. The industry viewed legacy EDI groupware as an agent in converting tacit knowledge to explicit knowledge. Approach: It was a descriptive study. In this study, an undertaking explored the implementation of this groupware application, its organizational impact, success factors and success indicators and this using the framework and analysis of legacy EDI groupware, which incorporated the objectives, strategies, success indicators and success factors. The study presented the finding of a case study of an automotive company, who contracted an external website design consultant to implement legacy EDI groupware system on their sites. The report explored the website design consultant company in order to gain an alternate perspective of topics and issues raised by the study. Results: In this study, legacy EDI groupware technology had successfully offered infrastructure to the automotive industry, which supported the acquisition of knowledge and enhanced the environment that supported the creation and management of knowledge artifacts. Conclusion: The choice and use of the legacy EDI groupware project as a means of supporting knowledge management in providing value creation for automotive industry, was because of the belief that this technology was able to provide a strategy for managing and exploiting knowledge. This project also served to help automotive industry in understanding its knowledge asset, i.e., the value of its knowledge and in assessing that the successful application of its knowledge.

  9. Technical specification for the Quality Information Management System (QIMS) Pilot Project

    Energy Technology Data Exchange (ETDEWEB)

    Hall, R.C.; Claussen, L.M.; Thurston, I.

    1992-01-01

    This document contains implementation details for the Quality Information Management System (QIMS) Pilot Project, which has been released for VAX/VMS systems using the INGRES RDBMS. The INGRES Applications-By-Forms (ABF) software development tool was used to define the modules and screens which comprise the QIMS Pilot application. These specifications together with the QIMS information model and corresponding database definition constitute the QIMS technical specification and implementation description presented herein. The QIMS Pilot Project represents a completed software product which has been released for production use. Further extension projects are planned which will release new versions for QIMS. These versions will offer expanded and enhanced functionality to meet further customer requirements not accommodated by the QIMS Pilot Project.

  10. COMPARATIVE MULTIOBJECTIVE ANALYSIS OF COMPLICATED TECHNICAL AND SOCIAL SYSTEMS IN TERMS OF ECONOMICS AND MANAGEMENT

    Directory of Open Access Journals (Sweden)

    Dmitrii Vital'evich Panov

    2016-01-01

    Full Text Available The article is devoted to the comparative multiobjective analysis of complicated technical and social systems in terms of economics and management. The difficulty of carrying out such comparison is determined by multidimensionality of the target application, diversity and qualitative variety of separate system elements, dissimilarity of technological conditions, under which they are created, and analogues used for the comparison. It is not about choosing the one “best” solution out of several alternatives, how it is required having the traditional optimization task setting, but about the comparison of home object to its analogues. Usually the purpose of such comparison consists in the assessment of its comparative objective efficiency. However, the object compared is the product of the respective technological chain. The resources used to create the object and analogues compared are always different as well as technologies used to transform resources to end products. It is the reason for the new problem to assess the management quality of own object creation as compared to the analogues. Objectives. The purpose is the development of effective approaches to the management quality assessment of complicated technical and social systems creation. Four multiobjective tasks of integral assessment are considered to solve the stated problem: objective efficiency assessment, assessment of all kinds of resources used, applied technology assessment and finally three-objective task to assess the management quality of object creation with assessed objective efficiency by using stated resources and technologies. The last task implies achievement of the highest objective efficiency with the use of less resource and less sophisticated technology that points at the higher management level. The stated task pertains to the class of multiobjective decision making where alternatives are distinguished by partial criteria and depend on the range of uncertain

  11. Automated energy management systems for small buildings. Final report, Volume 1: technical document

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-08-01

    Energy controls can perform a valuable function in energy conservation or energy-management strategy in buildings. While the more-simple controls can be applied to virtually any building, the more-complex automation systems are currently available only to large buildings where their greater costs may be justified. At the present, however, there is a lack of effective, automatic energy-management control practices and schemes available for application to small buildings. This is due, in large measure, to the absence of cost-effective integrated control equipment in the small-building marketplace. Furthermore, a general philosophy or strategy, for the application of equipment for total energy conservation in small commercial buildings has not yet evolved. Both technical and marketing issues related to the implementation of automation systems in small commercial buildings under 75,000 square feet gross area are explored. The functional requirements for small-building automation systems are identified and determination of system costs and energy savings potential are made. Market analyses identify cost and payback requirements as well as attitudes of potential equipment buyers in the small-building market. Schools, apartments, and offices, which together consume more than half the energy of the small-building market, are used as analysis models. The market and technical analyses are combined to formulate the potential marketplace for a small building AEMS in terms of building size, and building type. An AEMS concept is defined which embodies the necessary functional requirements within a framework of applied strategy to energy conservation in buildings.

  12. Technical forums as an instrument for knowledge management in oil pipelines and terminals companies: the experience of TRANSPETRO

    Energy Technology Data Exchange (ETDEWEB)

    Almeida, Maria Fatima Ludovico de [Pontificia Universidade Catolica do Rio de Janeiro (PUC-Rio/ITUC), Rio de Janeiro, RJ (Brazil). Instituto Tecnologico; Santiago, Adilson; Ribeiro, Kassandra Senra; Arruda, Daniela Mendonca [TRANSPETRO - PETROBRAS Transporte S.A., Rio de Janeiro, RJ (Brazil)

    2009-07-01

    This paper describes the experience of TRANSPETRO's Oil Pipelines and Terminals Unit regarding an institutionalized knowledge management (KM) process of systematically promoting technical forums focused on: pipeline and terminal operations; industrial maintenance; and right-of-way activities management. This empirical work adds evidence that in the model of cooperative and communicative knowledge management it is necessary to motivate staff to provide the company with their tacit knowledge and to take a proactive part in knowledge management processes, particularly in technical forums. Within this KM perspective, technical forums have been held by TRANSPETRO for the following purposes: to discuss the main barriers and challenges the oil pipelines and terminals unit has to face in the coming years; to share and disseminate good practices concerning oil pipeline and terminal activities; to discuss new processes, methods and equipment developments with potential application in business and operational processes; to establish action plans concerning the main challenges, barriers and opportunities; to disseminate Research and Development (R and D) projects in course, new procedures, methods and equipment and to promote integration among forum attendees. The two year-experience in TRANSPETRO's Oil Pipelines and Terminals Unit revealed that technical forums have been an important instrument for cooperative and communicative knowledge management, according to evaluations from 173 attendees. (author)

  13. Technical and Non-Technical Measures for air pollution emission reduction: The integrated assessment of the regional Air Quality Management Plans through the Italian national model

    Science.gov (United States)

    D'Elia, I.; Bencardino, M.; Ciancarella, L.; Contaldi, M.; Vialetto, G.

    2009-12-01

    The Italian Air Quality legislation underwent sweeping changes with the implementation of the 1996 European Air Quality Framework Directive when the Italian administrative Regions were entrusted with air quality management tasks. The most recent Regional Air Quality Management Plans (AQMPs) highlighted the importance of Non-Technical Measures (NTMs), in addition to Technical Measures (TMs), in meeting environmental targets. The aim of the present work is to compile a list of all the TMs and NTMs taken into account in the Italian Regional AQMPs and to give in the target year, 2010, an estimation of SO 2, NO x and PM 10 emission reductions, of PM 10 concentration and of the health impact of PM 2.5 concentrations in terms of Life Expectancy Reduction. In order to do that, RAINS-Italy, as part of the National Integrated Modeling system for International Negotiation on atmospheric pollution (MINNI), has been applied. The management of TMs and NTMs inside RAINS have often obliged both the introduction of exogenous driving force scenarios and the control strategy modification. This has inspired a revision of the many NTM definitions and a clear choice of the definition adopted. It was finally highlighted that only few TMs and NTMs implemented in the AQMPs represent effective measures in reaching the environmental targets.

  14. Value of information in natural resource management: technical developments and application to pink-footed geese

    Science.gov (United States)

    Williams, Byron K.; Johnson, Fred A.

    2015-01-01

    The “value of information” (VOI) is a generic term for the increase in value resulting from better information to guide management, or alternatively, the value foregone under uncertainty about the impacts of management (Yokota and Thompson, Medical Decision Making 2004;24: 287). The value of information can be characterized in terms of several metrics, including the expected value of perfect information and the expected value of partial information. We extend the technical framework for the value of information by further developing the relationship between value metrics for partial and perfect information and describing patterns of their performance. We use two different expressions for the expected value of partial information to highlight its relationship to the expected value of perfect information. We also develop the expected value of partial information for hierarchical uncertainties. We highlight patterns in the value of information for the Svalbard population of the pink-footed goose (Anser brachyrhynchus), a population that is subject to uncertainty in both reproduction and survival functions. The framework for valuing information is seen as having widespread potential in resource decision making, and serves as a motivation for resource monitoring, assessment, and collaboration.

  15. Technical Note: Seasonality in alpine water resources management – a regional assessment

    Directory of Open Access Journals (Sweden)

    W. Rauch

    2008-01-01

    Full Text Available Alpine regions are particularly affected by seasonal variations in water demand and water availability. Especially the winter period is critical from an operational point of view, as being characterised by high water demands due to tourism and low water availability due to the temporal storage of precipitation as snow and ice. The clear definition of summer and winter periods is thus an essential prerequisite for water resource management in alpine regions. This paper presents a GIS-based multi criteria method to determine the winter season. A snow cover duration dataset serves as basis for this analysis. Different water demand stakeholders, the alpine hydrology and the present day water supply infrastructure are taken into account. Technical snow-making and (winter tourism were identified as the two major seasonal water demand stakeholders in the study area, which is the Kitzbueheler region in the Austrian Alps. Based upon different geographical datasets winter was defined as the period from December to March, and summer as the period from April to November. By determining potential regional water balance deficits or surpluses in the present day situation and in future, important management decisions such as water storage and allocation can be made and transposed to the local level.

  16. Learning Styles of Non-Science and Non-Technology Students on Technical Courses in an Information Management Program

    Science.gov (United States)

    Amran, Noraizan; Bahry, Farrah Diana Saiful; Yusop, Zulkefli Mohd; Abdullah, Szarina

    2011-01-01

    The study was conducted among students with some or no background in science and technology subjects (non S&T students) who enrolled in the Faculty of Information Management in a Malaysian public university during semester 2009/2010. It aims to identify students' learning styles on technical courses in order to provide inputs to instructors'…

  17. Improving curriculum development practices in a technical vocational community college: examining effects of a professional development arrangement for middle managers

    NARCIS (Netherlands)

    Albashiry, N.M.; Voogt, J.M.; Pieters, J.M.

    2015-01-01

    Learning about curriculum development is critical for middle managers of technical vocational institutions in order to assume curriculum leadership in maintaining and enhancing the quality and relevance of their educational programs. This case study reports on the design and effects of a

  18. Improving Curriculum Development Practices in a Technical Vocational Community College: Examining Effects of a Professional Development Arrangement for Middle Managers

    Science.gov (United States)

    Albashiry, Nabeel M.; Voogt, Joke M.; Pieters, Jules M.

    2015-01-01

    Learning about curriculum development is critical for middle managers of technical vocational institutions in order to assume curriculum leadership in maintaining and enhancing the quality and relevance of their educational programs. This case study reports on the design and effects of a professional development arrangement (PDA), with such a…

  19. Improving curriculum development practices in a technical vocational community college: examining effects of a professional development arrangement for middle managers

    NARCIS (Netherlands)

    Albashiry, N.M.; Voogt, J.M.; Pieters, J.M.

    2015-01-01

    Learning about curriculum development is critical for middle managers of technical vocational institutions in order to assume curriculum leadership in maintaining and enhancing the quality and relevance of their educational programs. This case study reports on the design and effects of a professiona

  20. Improving Curriculum Development Practices in a Technical Vocational Community College: Examining Effects of a Professional Development Arrangement for Middle Managers

    Science.gov (United States)

    Albashiry, Nabeel M.; Voogt, Joke M.; Pieters, Jules M.

    2015-01-01

    Learning about curriculum development is critical for middle managers of technical vocational institutions in order to assume curriculum leadership in maintaining and enhancing the quality and relevance of their educational programs. This case study reports on the design and effects of a professional development arrangement (PDA), with such a…

  1. A VIRTUAL TECHNICAL SYSTEMS AUDIT OF RESEARCH QUALITY ASSURANCE AND RECORD MANAGEMENT SYSTEMS IN ORD, U.S EPA

    Science.gov (United States)

    NHEERL conducts technical systems audits (TSAs) on its research projects. The findings are reported by the QA Manager (QAM) to the Director of QA (DQA) as Exemplary Findings (things the QA Team liked); Corrective Actions (things that must be corrected immediately); and Areas for...

  2. FAA-NASA Sixth International Conference on the Continued Airworthiness of Aircraft Structures

    Science.gov (United States)

    1995-12-01

    British Airways Human Factors in Aviation Maintenance: Current FAA Research .............................. 91 William T. Shepherd, Federal Aviation...Development of Advanced Structural Analysis Methodologies for Predicting W idespread Fatigue Damage in Aircraft Structures...where satellite communications to transmit aircraft position data derived from GPS directly to controllers via data link. On June 21, FAA and Qantas

  3. 78 FR 63276 - Interim Policy, FAA Review of Solar Energy System Projects on Federally Obligated Airports

    Science.gov (United States)

    2013-10-23

    ... Federal Aviation Administration Interim Policy, FAA Review of Solar Energy System Projects on Federally... federally obligated airports to construct solar energy systems on airport property. FAA is adopting an... for measuring ocular impact of proposed solar energy systems which are effective upon publication....

  4. Scalable data management, analysis and visualization (SDAV) Institute. Final Scientific/Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Geveci, Berk [Kitware, Inc., Clifton Park, NY (United States)

    2017-03-28

    The purpose of the SDAV institute is to provide tools and expertise in scientific data management, analysis, and visualization to DOE’s application scientists. Our goal is to actively work with application teams to assist them in achieving breakthrough science, and to provide technical solutions in the data management, analysis, and visualization regimes that are broadly used by the computational science community. Over the last 5 years members of our institute worked directly with application scientists and DOE leadership-class facilities to assist them by applying the best tools and technologies at our disposal. We also enhanced our tools based on input from scientists on their needs. Many of the applications we have been working with are based on connections with scientists established in previous years. However, we contacted additional scientists though our outreach activities, as well as engaging application teams running on leading DOE computing systems. Our approach is to employ an evolutionary development and deployment process: first considering the application of existing tools, followed by the customization necessary for each particular application, and then the deployment in real frameworks and infrastructures. The institute is organized into three areas, each with area leaders, who keep track of progress, engagement of application scientists, and results. The areas are: (1) Data Management, (2) Data Analysis, and (3) Visualization. Kitware has been involved in the Visualization area. This report covers Kitware’s contributions over the last 5 years (February 2012 – February 2017). For details on the work performed by the SDAV institute as a whole, please see the SDAV final report.

  5. Spring Management Technical Points of Peach Tree%浅谈桃树的春季管理

    Institute of Scientific and Technical Information of China (English)

    赵丽红; 吕芳

    2015-01-01

    总结了桃树春季生产管理技术要点,包括整枝修剪、肥水管理、病虫害防治、果实套袋等方面的内容,为桃树种植户春季生产管理提供参考。%This paper summarizes the spring management technical points of peach tree, including pruning, fertilizer and water management, prevention and control of plant diseases and insect pests and fruit bagging, to provide reference of spring production management for peach tree growers.

  6. Technical Reference Suite Addressing Challenges of Providing Assurance for Fault Management Architectural Design

    Science.gov (United States)

    Fitz, Rhonda; Whitman, Gerek

    2016-01-01

    Research into complexities of software systems Fault Management (FM) and how architectural design decisions affect safety, preservation of assets, and maintenance of desired system functionality has coalesced into a technical reference (TR) suite that advances the provision of safety and mission assurance. The NASA Independent Verification and Validation (IV&V) Program, with Software Assurance Research Program support, extracted FM architectures across the IV&V portfolio to evaluate robustness, assess visibility for validation and test, and define software assurance methods applied to the architectures and designs. This investigation spanned IV&V projects with seven different primary developers, a wide range of sizes and complexities, and encompassed Deep Space Robotic, Human Spaceflight, and Earth Orbiter mission FM architectures. The initiative continues with an expansion of the TR suite to include Launch Vehicles, adding the benefit of investigating differences intrinsic to model-based FM architectures and insight into complexities of FM within an Agile software development environment, in order to improve awareness of how nontraditional processes affect FM architectural design and system health management. The identification of particular FM architectures, visibility, and associated IV&V techniques provides a TR suite that enables greater assurance that critical software systems will adequately protect against faults and respond to adverse conditions. Additionally, the role FM has with regard to strengthened security requirements, with potential to advance overall asset protection of flight software systems, is being addressed with the development of an adverse conditions database encompassing flight software vulnerabilities. Capitalizing on the established framework, this TR suite provides assurance capability for a variety of FM architectures and varied development approaches. Research results are being disseminated across NASA, other agencies, and the

  7. First DOE/LLL workshop on the DOE/STOR Technical Management Information System, (TMIS)

    Energy Technology Data Exchange (ETDEWEB)

    Hampel, V. E.; Gallo, L. E.; Kawin, R. A.; Kopytoff, V.; McGrogan, S.; O' Connell, L. G.; Pavel, G.; Schriebman, J. A.; Swanson, J. E.

    1979-01-01

    Abbreviated summaries and visual material used during the 2-day workshop of the DOE/STOR Technical Management Information System (TMIS) at Pine Mountain, Georgia are presented. Sixty-five representatives from government, industry, and the DOE national laboratories attended this workshop. It consisted of a series of lectures, tutorials, and hands-on, personal instructions with twelve on-line graphics terminals, multiplexed to the TMIS computer at LLL. At the time of the demonstration, TMIS provided for DOE/STOR administrators and project personnel 54 different data files, 12 models for econometric predictions and performance evaluation of electric and hybrid vehicles, electronic mail and conferencing, and automated access to 16 other information centers and computers. The main emphasis during FY 80/81 TMIS operation is on the use of energy storage systems in automobiles and transportation. TMIS is unique in that it provides for its users in one integrated system the totality of programmatic files required for the conduct of a national program: administrative data, bibliographic compendia, numeric data for components and systems, evaluation criteria, and interactive models by which such systems can be intercompared and econometric predictions made. TMIS is accessible by telephone dial-up and over the ARPANET.

  8. Summary of technical information and agreements from Nuclear Management and Resources Council industry reports addressing license renewal

    Energy Technology Data Exchange (ETDEWEB)

    Regan, C.; Lee, S. [Nuclear Regulatory Commission, Washington, DC (United States). Div. of Reactor Program Management; Chopra, O.K.; Ma, D.C.; Shack, W.J. [Argonne National Lab., IL (United States)

    1996-10-01

    In about 1990, the Nuclear Management and Resources Council (NUMARC) submitted for NRC review ten industry reports (IRs) addressing aging issues associated with specific structures and components of nuclear power plants ad one IR addressing the screening methodology for integrated plant assessment. The NRC staff had been reviewing the ten NUMARC IRs; their comments on each IR and NUMARC responses to the comments have been compiled as public documents. This report provides a brief summary of the technical information and NUMARC/NRC agreements from the ten IRs, except for the Cable License Renewal IR. The technical information and agreements documented herein represent the status of the NRC staffs review when the NRC staff and industry resources were redirected to address rule implementation issues. The NRC staff plans to incorporate appropriate technical information and agreements into the draft standard review plan for license renewal.

  9. Light Water Reactor Sustainability Program Technical Basis Guide Describing How to Perform Safety Margin Configuration Risk Management

    Energy Technology Data Exchange (ETDEWEB)

    Curtis Smith; James Knudsen; Bentley Harwood

    2013-08-01

    The INL has carried out a demonstration of the RISMC approach for the purpose of configuration risk management. We have shown how improved accuracy and realism can be achieved by simulating changes in risk – as a function of different configurations – in order to determine safety margins as the plant is modified. We described the various technical issues that play a role in these configuration-based calculations with the intent that future applications can take advantage of the analysis benefits while avoiding some of the technical pitfalls that are found for these types of calculations. Specific recommendations have been provided on a variety of topics aimed at improving the safety margin analysis and strengthening the technical basis behind the analysis process.

  10. Management of biogas projects. Legal, technical and economic aspects; Management von Biogas-Projekten. Rechtliche, technische und wirtschaftliche Aspekte

    Energy Technology Data Exchange (ETDEWEB)

    Boettcher, Joerg (ed.)

    2013-08-01

    Which requirements must be met in order to implement a biogas projects successfully? Legal enforceability and reliability of contracts as well as technical reliability are prerequisites for a successful financial and economic viability. Under this aspect, the book under consideration offers the first comprehensive overview of the technical, legal and economic aspects of biogas projects. Renowned experts from research and practice consider various aspects.

  11. Platform development for merging various information sources for water management: methodological, technical and operational aspects

    Science.gov (United States)

    Galvao, Diogo

    2013-04-01

    As a result of various economic, social and environmental factors, we can all experience the increase in importance of water resources at a global scale. As a consequence, we can also notice the increasing need of methods and systems capable of efficiently managing and combining the rich and heterogeneous data available that concerns, directly or indirectly, these water resources, such as in-situ monitoring station data, Earth Observation images and measurements, Meteorological modeling forecasts and Hydrological modeling. Under the scope of the MyWater project, we developed a water management system capable of satisfying just such needs, under a flexible platform capable of accommodating future challenges, not only in terms of sources of data but also on applicable models to extract information from it. From a methodological point of view, the MyWater platform obtains data from distinct sources, and in distinct formats, be they Satellite images or meteorological model forecasts, transforms and combines them in ways that allow them to be fed to a variety of hydrological models (such as MOHID Land, SIMGRO, etc…), which themselves can also be combined, using such approaches as those advocated by the OpenMI standard, to extract information in an automated and time efficient manner. Such an approach brings its own deal of challenges, and further research was developed under this project on the best ways to combine such data and on novel approaches to hydrological modeling (like the PriceXD model). From a technical point of view, the MyWater platform is structured according to a classical SOA architecture, with a flexible object oriented modular backend service responsible for all the model process management and data treatment, while the information extracted can be interacted with using a variety of frontends, from a web portal, including also a desktop client, down to mobile phone and tablet applications. From an operational point of view, a user can not only see

  12. National Waste Terminal Storage Program: management and technical program plan, FY 1976--FY 1978. [Information is obsolete and of historical interest only

    Energy Technology Data Exchange (ETDEWEB)

    1976-04-21

    The discussion on the management plan covers the program, responsibilities, general program schedule and logic, Office of Waste Isolation organization and facilities, management approach, administrative plan, and public affairs plan. The technical program plan includes geological studies, technical support studies, engineering studies, waste facility projects, environmental studies, system studies, data management, and international activities. The information contained in this report is obsolete and of historical interest only. (LK)

  13. 77 FR 4219 - FAA-Approved Portable Oxygen Concentrators; Technical Amendment

    Science.gov (United States)

    2012-01-27

    ... acceptable for use in SFAR 106 are Delphi Medical Systems' RS-00400 (added to the SFAR in 74 FR 2351) and... manufactured by Oxus, Inc. and not by Delphi Medical Systems. The two companies currently manufacturing these... for Use of Portable Oxygen Concentrator Systems On Board Aircraft * * * * * Section 2....

  14. Strategic Management for Competitive Advantage: A Case Study of Higher Technical and Vocational Education in Taiwan

    Science.gov (United States)

    Huang, Hsun-I; Lee, Cheng-Fei

    2012-01-01

    Higher technical and vocational education institutions in Taiwan face the pressure of an oversupply of student places and fierce competition from domestic and international institutions. To cope with these challenges, higher technical and vocational education institutions that are better equipped to respond to market requirements are expected to…

  15. Strategic Management for Competitive Advantage: A Case Study of Higher Technical and Vocational Education in Taiwan

    Science.gov (United States)

    Huang, Hsun-I; Lee, Cheng-Fei

    2012-01-01

    Higher technical and vocational education institutions in Taiwan face the pressure of an oversupply of student places and fierce competition from domestic and international institutions. To cope with these challenges, higher technical and vocational education institutions that are better equipped to respond to market requirements are expected to…

  16. Independent technical evaluation and recommendations for contaminated groundwater at the department of energy office of legacy management Riverton processing site

    Energy Technology Data Exchange (ETDEWEB)

    Looney, Brain B. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Denham, Miles E. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Eddy-Dilek, Carol A. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2014-04-01

    The U.S. Department of Energy Office of Legacy Management (DOE-LM) manages the legacy contamination at the Riverton, WY, Processing Site – a former uranium milling site that operated from 1958 to 1963. The tailings and associated materials were removed in 1988-1989 and contaminants are currently flushing from the groundwater. DOE-LM commissioned an independent technical team to assess the status of the contaminant flushing, identify any issues or opportunities for DOE-LM, and provide key recommendations. The team applied a range of technical frameworks – spatial, temporal, hydrological and geochemical – in performing the evaluation. In each topic area, an in depth evaluation was performed using DOE-LM site data (e.g., chemical measurements in groundwater, surface water and soil, water levels, and historical records) along with information collected during the December 2013 site visit (e.g., plant type survey, geomorphology, and minerals that were observed, collected and evaluated).

  17. Improve the Technical Report Management System%技术报告管理系统的完善

    Institute of Scientific and Technical Information of China (English)

    曹静

    2014-01-01

    通过对技术报告管理系统进行完善,使企业管理系统升级到J2EE平台上,这样人力成本较低,易于维护,使以往烦琐的技术报告工作流程实现电子化、无纸化。完善后的技术报告管理系统,平台性能更加先进,实现了技术资源信息的网络化,进一步提高企业的办公效率和管理水平,使其朝着信息化、网络化和现代化目标迈进,为企业实现科学、完整、规范的技术报告管理提供了一个良好的支撑平台。%In this paper, through the improvement of the technical report management system, the electric power research institute management system upgrade to the J2EE platform, the human cost is low, easy to maintain, the previous complex technical report work processes to achieve its electronic, paperless; technical report management system after perfecting the platform performance is more advanced, networked technology resources information, improve the office efficiency of EPRI, level, towards the informationization, networking, modern goal, provides a platform to support a good technical report management enterprises to realize scientific, complete, standard.

  18. Improved Management of the Technical Interfaces Between the Hanford Tank Farm Operator and the Hanford Waste Treatment Plant - 13383

    Energy Technology Data Exchange (ETDEWEB)

    Duncan, Garth M. [Bechtel National Inc., 2435 Stevens Center Place, Richland, Washington, 99352 (United States); Saunders, Scott A. [Washington River Protection Solutions, P.O. Box 850, Richland, Washington, 99352 (United States)

    2013-07-01

    The Department of Energy (DOE) is constructing the Waste Treatment and Immobilization Plant (WTP) at the Hanford site in Washington to treat and immobilize approximately 114 million gallons of high level radioactive waste (after all retrievals are accomplished). In order for the WTP to be designed and operated successfully, close coordination between the WTP engineering, procurement, and construction contractor, Bechtel National, Inc. and the tank farms operating contractor (TOC), Washington River Protection Solutions, LLC, is necessary. To develop optimal solutions for DOE and for the treatment of the waste, it is important to deal with the fact that two different prime contractors, with somewhat differing contracts, are tasked with retrieving and delivering the waste and for treating and immobilizing that waste. The WTP and the TOC have over the years cooperated to manage the technical interface. To manage what is becoming a much more complicated interface as the WTP design progresses and new technical issues have been identified, an organizational change was made by WTP and TOC in November of 2011. This organizational change created a co-located integrated project team (IPT) to deal with mutual and interface issues. The Technical Organization within the One System IPT includes employees from both TOC and WTP. This team has worked on a variety of technical issues of mutual interest and concern. Technical issues currently being addressed include: - The waste acceptance criteria; - Waste feed delivery and the associated data quality objectives (DQO); - Evaluation of the effects of performing a riser cut on a single shell tank on WTP operations; - The disposition of secondary waste from both TOC and WTP; - The close coordination of the TOC double shell tank mixing and sampling program and the Large Scale Integrated Test (LSIT) program for pulse jet mixers at WTP along with the associated responses to the Defense Nuclear Facilities Safety Board (DNFSB) Recommendation

  19. INDEPENDENT TECHNICAL ASSESSMENT OF MANAGEMENT OF STORMWATER AND WASTEWATER AT THE SEPARATIONS PROCESS RESEARCH UNIT (SPRU) DISPOSITION PROJECT, NEW YORK

    Energy Technology Data Exchange (ETDEWEB)

    Abitz, R.; Jackson, D.; Eddy-Dilek, C.

    2011-06-27

    The U.S. Department of Energy (DOE) is currently evaluating the water management procedures at the Separations Process Research Unit (SPRU). The facility has three issues related to water management that require technical assistance: (1) due to a excessive rainfall event in October, 2010, contaminated water collected in basements of G2 and H2 buildings. As a result of this event, the contractor has had to collect and dispose of water offsite; (2) The failure of a sump pump at a KAPL outfall resulted in a Notice of Violation issued by the New York State Department of Environment and Conservation (NYSDEC) and subsequent Consent Order. On-site water now requires treatment and off-site disposition; and (3) stormwater infiltration has resulted in Strontium-90 levels discharged to the storm drains that exceed NR standards. The contractor has indicated that water management at SPRU requires major staff resources (at least 50 persons). The purpose of this review is to determine if the contractor's technical approach warrants the large number of staff resources and to ensure that the technical approach is compliant and in accordance with federal, state and NR requirements.

  20. Technical Review of Law Enforcement Standards and Guides Relative to Incident Management

    Energy Technology Data Exchange (ETDEWEB)

    Stenner, Robert D.; Salter, R.; Stanton, J. R.; Fisher, D.

    2009-03-24

    In an effort to locate potential law enforcement-related standards that support incident management, a team from the Pacific Northwest National Laboratory (PNNL) contacted representatives from the National Institute of Standards-Office of Law Enforcement Standards (NIST-OLES), National Institute of Justice (NIJ), Federal Bureau of Investigation (FBI), Secret Service, ASTM International committees that have a law enforcement focus, and a variety of individuals from local and regional law enforcement organizations. Discussions were held with various state and local law enforcement organizations. The NIJ has published several specific equipment-related law enforcement standards that were included in the review, but it appears that law enforcement program and process-type standards are developed principally by organizations that operate at the state and local level. Input is provided from state regulations and codes and from external non-government organizations (NGOs) that provide national standards. The standards that are adopted from external organizations or developed independently by state authorities are available for use by local law enforcement agencies on a voluntary basis. The extent to which they are used depends on the respective jurisdictions involved. In some instances, use of state and local disseminated standards is mandatory, but in most cases, use is voluntary. Usually, the extent to which these standards are used appears to depend on whether or not jurisdictions receive certification from a “governing” entity due to their use and compliance with the standards. In some cases, these certification-based standards are used in principal but without certification or other compliance monitoring. In general, these standards appear to be routinely used for qualification, selection for employment, and training. In these standards, the term “Peace Officer” is frequently used to refer to law enforcement personnel. This technical review of national law

  1. TECHNICAL GUIDANCE DOCUMENT: CONSTRUCTION QUALITY MANAGEMENT FOR REMEDIAL ACTION AND REMEDIAL DESIGN WASTE CONTAINMENT SYSTEMS

    Science.gov (United States)

    This Technical Guidance Document is intended to augment the numerous construction quality control and construction quality assurance (CQC and CQA) documents that are available far materials associated with waste containment systems developed for Superfund site remediation. In ge...

  2. The Importance of Detail and Organization of Technical Drawings for the Project Management

    Directory of Open Access Journals (Sweden)

    Diego de Avila

    2015-11-01

    Full Text Available This research takes into account the process of technical improvement through the development and interpretation of technical drawing with the appropriate software. However, it’s known that the technical design, no longer being new in business, tends to effect the production process in a clear and objective way, but there is a concern for the training and use of this standardized form tool. This article presents a case study detailing the use of standardized technical drawing by CAD system and continuously. Seeking to meet the improvement of quality control, production flexibility, reduced costs, documentation and even security, in a company in the northern region of the State of Rio Grande do Sul.

  3. Hanford site solid waste management environmental impact statement technical information document [SEC 1 THRU 4

    Energy Technology Data Exchange (ETDEWEB)

    FRITZ, L.L.

    2003-04-01

    This Technical Information Document (TID) provides engineering data to support DOE/EIS-0286, ''Hanford Site Solid (Radioactive and Hazardous) Waste Program Environmental Impact Statement,'' including assumptions and waste volumes calculation data.

  4. Technical Network

    CERN Multimedia

    2007-01-01

    In order to optimize the management of the Technical Network (TN), to ease the understanding and purpose of devices connected to the TN, and to improve security incident handling, the Technical Network Administrators and the CNIC WG have asked IT/CS to verify the "description" and "tag" fields of devices connected to the TN. Therefore, persons responsible for systems connected to the TN will receive email notifications from IT/CS asking them to add the corresponding information in the network database. Thank you very much for your cooperation. The Technical Network Administrators & the CNIC WG

  5. Technical Network

    CERN Multimedia

    2007-01-01

    In order to optimise the management of the Technical Network (TN), to facilitate understanding of the purpose of devices connected to the TN and to improve security incident handling, the Technical Network Administrators and the CNIC WG have asked IT/CS to verify the "description" and "tag" fields of devices connected to the TN. Therefore, persons responsible for systems connected to the TN will receive e-mails from IT/CS asking them to add the corresponding information in the network database at "network-cern-ch". Thank you very much for your cooperation. The Technical Network Administrators & the CNIC WG

  6. ENHANCING RESERVOIR MANAGEMENT IN THE APPALACHIAN BASIN BY IDENTIFYING TECHNICAL BARRIER AND PREFERRED PRACTICES

    Energy Technology Data Exchange (ETDEWEB)

    Ronald R. McDowell; Khashayar Aminian; Katharine L. Avary; John M. Bocan; Michael Ed. Hohn; Douglas G. Patchen

    2003-09-01

    The Preferred Upstream Management Practices (PUMP) project, a two-year study sponsored by the United States Department of Energy (USDOE), had three primary objectives: (1) the identification of problems, problematic issues, potential solutions and preferred practices related to oil production; (2) the creation of an Appalachian Regional Council to oversee and continue this investigation beyond the end of the project; and (3) the dissemination of investigative results to the widest possible audience, primarily by means of an interactive website. Investigation and identification of oil production problems and preferred management practices began with a Problem Identification Workshop in January of 2002. Three general issues were selected by participants for discussion: Data Management; Reservoir Engineering; and Drilling Practices. At the same meeting, the concept of the creation of an oversight organization to evaluate and disseminated preferred management practices (PMP's) after the end of the project was put forth and volunteers were solicited. In-depth interviews were arranged with oil producers to gain more insight into problems and potential solutions. Project members encountered considerable reticence on the part of interviewees when it came to revealing company-specific production problems or company-specific solutions. This was the case even though interviewees were assured that all responses would be held in confidence. Nevertheless, the following production issues were identified and ranked in order of decreasing importance: Water production including brine disposal; Management of production and business data; Oil field power costs; Paraffin accumulation; Production practices including cementing. An number of secondary issues were also noted: Problems associated with Enhanced Oil Recovery (EOR) and Waterflooding; Reservoir characterization; Employee availability, training, and safety; and Sale and Purchase problems. One item was mentioned both in

  7. Configuration Management Automation (CMA) -

    Data.gov (United States)

    Department of Transportation — Configuration Management Automation (CMA) will provide an automated, integrated enterprise solution to support CM of FAA NAS and Non-NAS assets and investments. CMA...

  8. FAA Rotorcraft Research, Engineering, and Development Bibliography 1962-1989

    Science.gov (United States)

    1990-05-01

    understanding of community reaction to hellicoter noise remains Incomplete. A technique called "A-weighting" appears to produce realistic data outdoors and...of a new mobile home, outdoors , or in the living room or dining room of an old frame farmhouse near Champaign, IL. The control or comparison sound was...12. Spenswidag Agenicy Nemo e Add....s Department of Transportation Technical Ncte Federal Aviation Administration Maintenance and Development Se

  9. Technical Analysis of In-Valley Drainage Management Strategies for the Western San Joaquin Valley, California

    Science.gov (United States)

    Presser, Theresa S.; Schwarzbach, Steven E.

    2008-01-01

    The western San Joaquin Valley is one of the most productive farming areas in the United States, but salt-buildup in soils and shallow groundwater aquifers threatens this area?s productivity. Elevated selenium concentrations in soils and groundwater complicate drainage management and salt disposal. In this document, we evaluate constraints on drainage management and implications of various approaches to management considered in: *the San Luis Drainage Feature Re-Evaluation (SLDFRE) Environmental Impact Statement (EIS) (about 5,000 pages of documentation, including supporting technical reports and appendices); *recent conceptual plans put forward by the San Luis Unit (SLU) contractors (i.e., the SLU Plans) (about 6 pages of documentation); *approaches recommended by the San Joaquin Valley Drainage Program (SJVDP) (1990a); and *other U.S. Geological Survey (USGS) models and analysis relevant to the western San Joaquin Valley. The alternatives developed in the SLDFRE EIS and other recently proposed drainage plans (refer to appendix A for details) differ from the strategies proposed by the San Joaquin Valley Drainage Program (1990a). The Bureau of Reclamation (USBR) in March 2007 signed a record of decision for an in-valley disposal option that would retire 194,000 acres of land, build 1,900 acres of evaporation ponds, and develop a treatment system to remove salt and selenium from drainwater. The recently proposed SLU Plans emphasize pumping drainage to the surface, storing approximately 33% in agricultural water re-use areas, treating selenium through biotechnology, enhancing the evaporation of water to concentrate salt, and identifying ultimate storage facilities for the remaining approximately 67% of waste selenium and salt. The treatment sequence of reuse, reverse osmosis, selenium bio-treatment, and enhanced solar evaporation is unprecedented and untested at the scale needed to meet plan requirements. All drainage management strategies that have been proposed

  10. Facility Utilization Reports -  FAA Aviation Information Utilization Reports

    Data.gov (United States)

    Department of Transportation — Provides: (1) Space management and planning, including area calculations, tracking space by organization and employee, and monitoring space utilization information....

  11. Managing the Process of Protection Level Assessment of the Complex Organization and Technical Industrial Enterprises

    Science.gov (United States)

    Gorlov, A. P.; Averchenkov, V. I.; Rytov, M. Yu; Eryomenko, V. T.

    2017-01-01

    The article is concerned with mathematical simulation of protection level assessment of complex organizational and technical systems of industrial enterprises by creating automated system, which main functions are: information security (IS) audit, forming of the enterprise threats model, recommendations concerning creation of the information protection system, a set of organizational-administrative documentation.

  12. [Change management: An analysis of actors; perceptions about technical assistance in the Democratic Republic of Congo].

    Science.gov (United States)

    Ribesse, Nathalie; Iyeti, Alain; Macq, Jean

    2015-01-01

    Technical assistance (TA) is a common component of health system strengthening interventions. This type of intervention is too often designed and evaluated according to a logic that fails to take into account social complexity. Actors' perceptions are one element of this complexity. This article presents a study conducted in the Democratic Republic of Congo designed to identify perceptions concerning two types of technical support providers for health system strengthening: long-term technical assistants (agents of development agencies) and provincial technical advisors (agents of the Ministry of Health). Interviews were conducted with an innovative tool inspired by the principles of systems thinking. Interviewees were actors involved in a TA intervention in the province of Bandundu. Their expectations regarding TA providers were identified in terms of personal characteristics (knowledge, know-how and interpersonal skills), roles, and styles of interaction for capacity building ("interventionist/ prescriptive axes"). Interviewees emphasized the importance of mutual learning and the quality of interactions, which depends on TA provider's interpersonal skills and mutual willingness. Perceptions of TA provider's characteristics tend to be similar, but several differences were observed concerning the expectations about the roles of TAs, and the style that should be adopted for capacity building. Ignoring these differences in expectations may be a threat to the effectiveness of TA.

  13. Managing Technical and Cost Uncertainties During Product Development in a Simulation-Based Design Environment

    Science.gov (United States)

    Karandikar, Harsh M.

    1997-01-01

    An approach for objective and quantitative technical and cost risk analysis during product development, which is applicable from the earliest stages, is discussed. The approach is supported by a software tool called the Analytical System for Uncertainty and Risk Estimation (ASURE). Details of ASURE, the underlying concepts and its application history, are provided.

  14. A Tanzanian Perspective of the Technical Aspects of IT Service Management Education

    Science.gov (United States)

    Kemppainen, Jyri; Tedre, Matti; Sutinen, Erkki

    2012-01-01

    Information technology (IT) professionals face markedly different kinds of challenges in developing countries from the ones in developed countries. Based on the research literature and our fourteen years of fieldwork in Iringa, Tanzania, we have identified eight groups of technical characteristics of IT work that significantly affect the work of…

  15. Regulation and building technical management, France remains under-fitted; Regulation et GTB, la France est encore sous-equipee

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    2003-04-01

    The French market of centralized space heating regulation remains practically stagnant with important disparities with respect to the type of heating: electrical or hot water. This trend should change according to the variations of the domestic market which is linked, to some extent, to the opening of energy markets. However, two points remain certain: the French dwellings remain under-fitted in the domain of regulation systems, and the installations and technical management systems of tertiary buildings are implemented with the minimum possibilities. (J.S.)

  16. Review and comment on the advanced spent fuel management process (1): Technical aspects and non-proliferation concerns

    Energy Technology Data Exchange (ETDEWEB)

    Song, Yo Taik

    2001-01-01

    Efforts are made to analyze the project, the Advanced Spent Fuel Management Technology (ASFMT), which is currently carried out at Korea Atomic Energy Research Institute, on the technical feasibility and validity as well as on the nuclear non-proliferation concerns. The project is a part of a program under the 'Long and Midterm Nuclear Development Program'. On the technical analysis, reviewed the papers presented at the national and international meetings on the subject by KAERI staffs, and also participated to various technical discussions on the 'Mock-up Test', currently in progress. On the non-proliferation concerns, the ASFMT project was reviewed and analyzed in reference to various programs currently in progress or in a formulation stages in US, such as the DOE TOPS and ATW. Further reviewed the past JASNEC process and programs for possible application of the ASFMT project for JASNEC project. Provided a few thoughts for effectively carrying out the ASFMT project, and a plan for the next phase is presented.

  17. Waste management issues and their potential impact on technical specifications of CANDU fuel materials

    Energy Technology Data Exchange (ETDEWEB)

    Tait, J.C.; Johnson, L.H. [Atomic Energy of Canada Limited, Pinawa, Manitoba (Canada)

    1997-07-01

    The technical specifications for the composition of nuclear fuels and materials used in Canada's CANDU reactors have been developed by AECL and materials manufacturers, taking into account considerations specific to their manufacture and the effect of minor impurities on fuel behaviour in reactor. Nitrogen and chlorine are examples of UO{sub 2} impurities, however, where there is no technical specification limit. These impurities are present in the source materials or introduced in the fabrication process and are neutron activated to {sup 14}C and {sup 36}C1, which after {sup 129}I , are the two most significant contributors to dose in safety assessments for the disposal of used fuel. For certain impurities, environmental factors, particularly the safety of the disposal of used fuels, should be taken into consideration when deriving 'allowable' impurity limits for nuclear fuel materials. (author)

  18. An Evaluation of the Federal Energy Management Program Technical Assistance Workshops: Results of a 1998 Customer Survey

    Energy Technology Data Exchange (ETDEWEB)

    G. B. Gordon; N. Hall

    1999-04-01

    This report presents the results of a customer telephone survey of the participants of six workshops provided by the U. S. Department of Energy Federal Energy Management Program (FEMP) during calendar years 1995 and 1996. The primary purpose for the survey was to provide the Team Leader for FEMP Technical Assistance and members of the team with detailed customer feedback pertaining to how well selected FEMP workshops are doing and to identify areas for improvement. The information presented enables managers to see both the strengths of their workshops, as well as workshop components that can be improved. In addition, the report identifies the questions included in the survey that were the most productive for obtaining customers experiences, opinions and recommendations. The experiences gained during this survey provide a platform from which to launch an annual FEMP customer survey.

  19. Vision and framework for technical and management support to facilitate foreign spent fuel storage and geologic disposal in Russia

    Energy Technology Data Exchange (ETDEWEB)

    Halsey, W G; Jardine, L J; Smith, C F

    1999-07-01

    This ''Technical and Management Support'' program would facilitate the transfer of spent fuel from commercial power plants in Taiwan to a storage and geologic repository site near Krasnoyarsk, Russia. This program resolves issues of disposition of Taiwan spent fuel (including US origin fuel) and provides revenue for Russia to develop an integrated spent fuel storage and radioactive waste management system including a geologic repository. LLNL has ongoing contracts and collaborations with all the principal parties and is uniquely positioned to facilitate the development of such a program. A three-phase approach over 20 years is proposed: namely, an initial feasibility investigation followed by an engineering development phase, and then implementation.

  20. 新环境下技校学生管理工作探析%Analysis of Technical School Students' Management under the New Environment

    Institute of Scientific and Technical Information of China (English)

    胡艳华

    2014-01-01

    Technical school student management has always been a problem of technical school education. This paper dis-cusses the technical school students' individualized measures, including the traditional teaching, preparatory classes, special education classes, etc., and enhanced personal accomplishment, quantitative assessment of a number of entry points, such as the management of technical school classes were explored.%技校学生管理一直以来是技校教育的一个难题。本文探讨了对技校学生进行因材施教的措施,包括传统教学、预科班、特殊教育班等方式,并对技校班级管理工作的增强个人修养、量化考核等若干切入点进行探析。

  1. Knowledge Management: A Tripartite Conceptual Framework for Career and Technical Teacher Educators

    Science.gov (United States)

    Lee, Hae-Young; Roth, Gene L.

    2008-01-01

    Researchers and practitioners consider knowledge management to be a strategic intervention that integrates organizational resources such as technologies and human resources. This conceptual paper focuses on the foundational contributions of economics, sociology, and psychology to knowledge management. Select theories from each foundational area…

  2. Career Anchors and Career Paths: A Panel Study of Management School Graduates. Technical Report No. 1.

    Science.gov (United States)

    Schein, Edgar H.

    The first of a series, this report describes a 10-year followup study of a sample of 44 graduates of the Sloan School of Management, analyzing the interaction of personal values and career events in the lives of managers in organizations. All 44 participants were located, interviewed, and given the same attitude surveys as in the early 1960's.…

  3. Marketing: Managing the Marketing Mix. Courseware Evaluation for Vocational and Technical Education.

    Science.gov (United States)

    Fleming, Lian; And Others

    This courseware evaluation rates the Marketing: Managing the Marketing Mix program developed by Control Data Limited. (This program--not contained in this document--is designed to introduce decisions made by marketing managers during the implementation phase of marketing.) Part A describes the program in terms of subject area (marketing, decision…

  4. The Graduate Management Admission Test: Technical Report on Test Development and Score Interpretation for GMAT Users.

    Science.gov (United States)

    Schrader, William B.

    This report provides information on test development, test administration, and score interpretation for the Graduate Management Admission Test (GMAT). The GMAT, first administered in 1954, provides objective measures of an applicant's abilities for use in admissions decisions by graduate management schools. It is currently composed of five…

  5. Technical Training Requirements of Middle Management in the Greek Textile and Clothing Industries.

    Science.gov (United States)

    Fotinopoulou, K.; Manolopoulos, N.

    A case study of 16 companies in the Greek textile and clothing industry elicited the training needs of the industry's middle managers. The study concentrated on large and medium-sized work units, using a lengthy questionnaire. The study found that middle managers increasingly need to solve problems and ensure the reliability of new equipment and…

  6. Thinking on Technical Materials Management in Colleges and Universities%关于做好高校技术物资管理工作的思考

    Institute of Scientific and Technical Information of China (English)

    唐宣东; 杜方

    2012-01-01

    Combined with the technical materials management in colleges and universities,the basic content of technical materials management is cleared. This paper systematically arranges working ideas in view of the problems of the technical materials management, such as strengthening material management system reform, perfectting the system of assets management, establishing of a high level of technical materials management staff, constructing network management platform, improving material utilization technology, aimed at providing a clear working idea for colleges and universities.%结合现阶段各高校技术物资管理的发展现状,明确了技术物资管理工作的基本内容.针对高校技术物资管理中存在的问题,提出了加强物资管理体制改革,健全资产管理制度,建立高水平的技术物资管理人员队伍,构建网络管理平台,提高技术物资利用率等措施.旨在为高校技术物资管理提供清晰的工作思路.

  7. Shifting from presumptive to test-based management of malaria - technical basis and implications for malaria control in Ghana.

    Science.gov (United States)

    Baiden, F; Malm, K; Bart-Plange, C; Hodgson, A; Chandramohan, D; Webster, J; Owusu-Agyei, S

    2014-06-01

    The presumptive approach was the World Health Organisation (WHO) recommended to the management of malaria for many years and this was incorporated into syndromic guidelines such as the Integrated Management of Childhood Illnesses (IMCI). In early 2010 however, WHO issued revised treatment guidelines that call for a shift from the presumptive to the test-based approach. Practically, this implies that in all suspected cases, the diagnosis of uncomplicated malaria should be confirmed using rapid test before treatment is initiated. This revision effectively brings to an end an era of clinical practice that span several years. Its implementation has important implications for the health systems in malaria-endemic countries. On the basis of research in Ghana and other countries, and evidence from program work, the Ghana National Malaria Control Program has issued revised national treatment guidelines that call for implementation of test-based management of malaria in all cases, and across all age groups. This article reviews the evidence and the technical basis for the shift to test-based management and examines the implications for malaria control in Ghana.

  8. From management to negotiation: technical and institutional innovations for integrated water resource management in the Upper Comoé River Basin, Burkina Faso.

    Science.gov (United States)

    Roncoli, Carla; Kirshen, Paul; Etkin, Derek; Sanon, Moussa; Somé, Léopold; Dembélé, Youssouf; Sanfo, Bienvenue J; Zoungrana, Jacqueline; Hoogenboom, Gerrit

    2009-10-01

    This study focuses on the potential role of technical and institutional innovations for improving water management in a multi-user context in Burkina Faso. We focus on a system centered on three reservoirs that capture the waters of the Upper Comoé River Basin and servicing a diversity of users, including a sugar manufacturing company, a urban water supply utility, a farmer cooperative, and other downstream users. Due to variable and declining rainfall and expanding users' needs, drastic fluctuations in water supply and demand occur during each dry season. A decision support tool was developed through participatory research to enable users to assess the impact of alternative release and diversion schedules on deficits faced by each user. The tool is meant to be applied in the context of consultative planning by a local user committee that has been created by a new national integrated water management policy. We contend that both solid science and good governance are instrumental in realizing efficient and equitable water management and adaptation to climate variability and change. But, while modeling tools and negotiation platforms may assist users in managing climate risk, they also introduce additional uncertainties into the deliberative process. It is therefore imperative to understand how these technological and institutional innovations frame water use issues and decisions to ensure that such framing is consistent with the goals of integrated water resource management.

  9. From Management to Negotiation: Technical and Institutional Innovations for Integrated Water Resource Management in the Upper Comoé River Basin, Burkina Faso

    Science.gov (United States)

    Roncoli, Carla; Kirshen, Paul; Etkin, Derek; Sanon, Moussa; Somé, Léopold; Dembélé, Youssouf; Sanfo, Bienvenue J.; Zoungrana, Jacqueline; Hoogenboom, Gerrit

    2009-10-01

    This study focuses on the potential role of technical and institutional innovations for improving water management in a multi-user context in Burkina Faso. We focus on a system centered on three reservoirs that capture the waters of the Upper Comoé River Basin and servicing a diversity of users, including a sugar manufacturing company, a urban water supply utility, a farmer cooperative, and other downstream users. Due to variable and declining rainfall and expanding users’ needs, drastic fluctuations in water supply and demand occur during each dry season. A decision support tool was developed through participatory research to enable users to assess the impact of alternative release and diversion schedules on deficits faced by each user. The tool is meant to be applied in the context of consultative planning by a local user committee that has been created by a new national integrated water management policy. We contend that both solid science and good governance are instrumental in realizing efficient and equitable water management and adaptation to climate variability and change. But, while modeling tools and negotiation platforms may assist users in managing climate risk, they also introduce additional uncertainties into the deliberative process. It is therefore imperative to understand how these technological and institutional innovations frame water use issues and decisions to ensure that such framing is consistent with the goals of integrated water resource management.

  10. A Common Software Configuration Management System for CERN SPS and LEP Accelerators and Technical Services

    CERN Document Server

    Hatziangeli, Eugenia; Bragg, A E; Ninin, P; Patino, J; Sobczak, H

    1999-01-01

    Software configuration management activities are crucial to assure the integrity of current operational and the quality of new software either being developed at CERN or outsourced. The functionality of the present management system became insufficient with large maintenance overheads. In order to improve our situation, a new software configuration management system has been set up. It is based on Razor, a commercial tool, which supports the management of file versions and operational software releases, along with integrated problem reporting capabilities. In addition to the basic tool functionality, automated procedures were custom made, for the installation and distribution of operational software. Policies were developed and applied over the software development life cycle to provide visibility and control. The system ensures that, at all times, the status and location of all deliverable versions are known, the state of shared objects is carefully controlled and unauthorised changes prevented. It provides ...

  11. A Common Software-Configuration Management System for CERN SPS and LEP Accelerators and Technical Services

    CERN Document Server

    Hatziangeli, Eugenia; Bragg, A E; Ninin, P; Patino, J; Sobczak, H

    2000-01-01

    Software-configuration management activities are crucial to ensure the integrity of current operational software and the quality of new software either being developed at CERN or outsourced. The functionality of the present management system became insufficient with large maintenance overheads. In order to improve our situation, a new software-configuration management system has been set up. It is based on Razor R, a commercial tool, which supports the management of file versions and operational software releases, along with integrated problem-reporting capabilities. In addition to the basic tool functionality, automated procedures were custom-made for the installation and distribution of operational software. The system ensures that, at all times, the status and location of all deliverable versions are known, the state of shared objects is carefully controlled and unauthorized changes prevented. This paper outlines the reasons for selecting the chosen tool, the implementation of the system and the final goal...

  12. Technical Evaluation Report 25: Open Source Software: Two learning management systems

    Directory of Open Access Journals (Sweden)

    Jim Depow

    2003-10-01

    Full Text Available This report is the second in a two-part series about open source (OSS and free software (FS systems in online education. These are rapidly emerging as alternatives to costly proprietary learning management systems (LMS and content management systems (CMS. This report reviews two LMS systems and one CMS system, all developed on the OSS/ FS principle and available to users free of charge.

  13. Quality Dashboards: technical and architectural considerations of an actionable reporting tool for population management.

    Science.gov (United States)

    Olsha-Yehiav, Maya; Einbinder, Jonathan S; Jung, Eunice; Linder, Jeffrey A; Greim, Julie; Li, Qi; Schnipper, Jeffrey L; Middleton, Blackford

    2006-01-01

    Quality Dashboards (QD) is a condition-specific, actionable web-based application for quality reporting and population management that is integrated into the Electronic Health Record (EHR). Using server-based graphic web controls in a .Net environment to construct Quality Dashboards allows customization of the reporting tool without the need to rely on commercial business intelligence tool. Quality Dashboards will improve patient care and quality outcomes as clinicians utilize the reporting tool for population management.

  14. Enhanced FAA-hybrid III numerical dummy model in Madymo for aircraft occupant safety assessment

    NARCIS (Netherlands)

    Boucher, H.; Waagmeester, C.D.

    2003-01-01

    To improve survivability and to minimize the risk of injury to occupants in helicopter crash events, a complete Cabin Safety System concept including safety features and an enhanced FAA-Hybrid III dummy were developed within the HeliSafe project. A numerical tool was also created and validated to al

  15. 47 CFR 17.7 - Antenna structures requiring notification to the FAA.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 1 2010-10-01 2010-10-01 false Antenna structures requiring notification to..., MARKING, AND LIGHTING OF ANTENNA STRUCTURES Federal Aviation Administration Notification Criteria § 17.7 Antenna structures requiring notification to the FAA. A notification to the Federal...

  16. Surgical management of maxillomandibular advancement in sleep apnea patients: specific technical considerations.

    Science.gov (United States)

    Gilon, Y; Raskin, S; Heymans, O; Poirrier, R

    2001-01-01

    Maxillomandibular advancement is an integral part of the surgical treatment of patients suffering from obstructive sleep apnea. A number of publications report its efficacy and have attempted to define predictive success criteria. However, few authors have shown an interest in the surgical specificity of this intervention and in the difficulties that can be encountered, which differ from those seen in conventional orthognathic surgery. In this article, a series of patients treated with maxillomandibular osteotomy to correct obstructive sleep apnea syndrome (n = 17) are compared with patients who underwent surgery for the correction of dentofacial disharmonies (n = 33). Observations emphasized the importance of respecting a strict surgical and postsurgical protocol to avoid any technical traps linked to maxillomandibular advancement, both in preoperative simulations and during and after surgery. Results concerning sleep parameters will be the subject of a future publication.

  17. [Urotechnology: a new interdisciplinary platform for promoting and managing of technical innovations in urology].

    Science.gov (United States)

    Miernik, A; Becker, C; Wullich, B; Schoenthaler, M; Arnolds, B J; Wetterauer, U

    2015-01-01

    The innovative power in medical engineering and technology development requires a close cooperation between universities and non-university research institutions and a collaboration with industrial partners. German knowledge in the fields of video and micro-optics, microsystem technology and of informational technology and software applications seem to be highly competitive at international level. Germany's previous leadership in the development of technical equipment will be challenged by today's requirements and difficulties in medical engineering. Research and expenses demands for the development of novel medical instruments, products and applications will increase continuously. Transparency and coordinated collaboration between universities and industrial partners will contribute to a substantial improvement in surgical therapy. Medical technology of the future, including urotechnology, requires professional structures and coordination and will have to be based on evidence.

  18. Execution management of batter piles and problems of technical development. Uchikomi kui no seko kanri to gijutsu kaihatsu no kadai

    Energy Technology Data Exchange (ETDEWEB)

    Ninomiya, Y. (JDC Corp., Tokyo (Japan)); Omori, H. (Nippon Kokan Koji K.K., Yokohama (Japan))

    1991-05-15

    This report introduces the practical examples of the present system of execution manegement. Necessary functions and basic problems are described as well as the possibility of utilizing hydraulic/pneumatic pressure for the automation or the robotization which are the future technical problems. Application examples are also shown on the execution management system by means of an accelometer which was developed by the authors. This area is not long after the start of study. Essential points of the execution management of the batter piles are that the front tips of the piles are confirmed to be securely penetrated to the specified depth in the specific support layer giving the required supporting strength at the same time. For this purpose, what are required are to accurately measure the penetration displacement of the piles and assess the maximum penetration and final penetration and the amount of the rebound. Then the support strength should be checked from the dynamic support force. For this, it is required to develop an execution management system which is simple and adept for the operation at the spot. 9 refs., 12 figs., 5 tabs.

  19. Management of bisphosphonate-related osteonecrosis of the jaw with a platelet-rich fibrin membrane: technical report.

    Science.gov (United States)

    Soydan, Sıdıka Sinem; Uckan, Sina

    2014-02-01

    Bisphosphonate-related osteonecrosis of the jaw (BRONJ) is a challenging complication resulting from the long-term application of bisphosphonates. In most cases, BRONJ occurs after a surgical procedure involving the jawbone. Currently, the management of BRONJ remains controversial, and there is no definitive treatment other than palliative methods. Platelet-rich fibrin (PRF) represents a relatively new biotechnology for the stimulation and acceleration of tissue healing and bone regeneration. This technical note describes the total closure of moderate bone exposure in persistent BRONJ in 2 weeks with a double-layer PRF membrane. PRF may stimulate gingival healing and act as a barrier membrane between the alveolar bone and the oral cavity. PRF may offer a fast, easy, and effective alternative method for the closure of bone exposure in BRONJ.

  20. ANL Technical Support Program for DOE Environmental Restoration and Waste Management; Annual report, October 1992--September 1993

    Energy Technology Data Exchange (ETDEWEB)

    Bates, J.K.; Bourcier, W.L.; Bradley, C.R. [and others

    1994-06-01

    This report is an overview of the progress during FY 1993 for the Technical Support Program that is part of the ANL Technology Support Activity for DOE Environmental Restoration and Waste Management (EM). The purpose is to evaluate, before hot start-up of the Defense Waste Processing Facility (DWPF) and the West Valley Demonstration Project (WVDP), factors that are anticipated to affect glass reaction in an unsaturated environment typical of what may be expected for the candidate Yucca Mountain repository site. Specific goals for the testing program include the following: reviewing and evaluating available data on parameters that will be important in establishing the long-term performance of glass in a repository environment; performing tests to further quantify the effects of important variables where there are deficiencies in the available data; and initiating long-term tests to determine glass performance under a range of conditions applicable to repository disposal.

  1. The Hybrid Design: Integrating the Human and Technical Components of Just-In-Time Knowledge Management Systems

    Directory of Open Access Journals (Sweden)

    Nabie Y. Conteh

    2011-06-01

    Full Text Available This paper explores the right balance of human and technical resources in the design of Just-in-Time knowledge delivery. It also examines and analyzes the case study: “Teltech: The business of Knowledge Management” by Davenport. It further attempts to depict the characteristics of the hybrid. The paper describes how the hybrid can be applied to Just-In-Time knowledge delivery. It also seeks to analyze and explore its interplay with knowledge splits with a view to designing Just-In- Time Knowledge Management. These include: “tacit versus explicit knowledge”, “in-process” versus “after action” documentation, “process-centered versus product-centered approach”, “knowledge versus information” and the “culture of sharing versus hoarding.”

  2. ANL Technical Support Program for DOE Environmental Restoration and Waste Management. Annual report, October 1990--September 1991

    Energy Technology Data Exchange (ETDEWEB)

    Bates, J.K.; Bradley, C.R.; Buck, E.C.; Cunnane, J.C.; Dietz, N.L.; Ebert, W.L.; Emery, J.W.; Feng, X.; Gerding, T.J.; Gong, M.; Hoh, J.C.; Mazer, J.J.; Wronkiewicz, D.J. [Argonne National Lab., IL (United States); Bourcier, W.L.; Morgan, L.E.; Nielsen, J.K.; Steward, S.A. [Lawrence Livermore National Lab., CA (United States); Ewing, R.C.; Wang, L.M. [New Mexico Univ., Albuquerque, NM (United States); Han, W.T.; Tomozawa, M. [Rensselaer Polytechnic Inst., Troy, MI (United States)

    1992-03-01

    This report provides an overview of progress during FY 1991 for the Technical Support Program that is part of the ANL Technology Support Activity for DOE, Environmental Restoration and Waste Management (EM). The purpose is to evaluate, before hot start-up of the Defenses Waste Processing Facility (DWPF) and the West Valley Demonstration Project (WVDP), factors that are likely to affect glass reaction in an unsaturated environment typical of what may be expected for the candidate Yucca Mountain repository site. Specific goals for the testing program include the following: (1) to review and evaluate available information on parameters that will be important in establishing the long-term performance of glass in a repository environment; (2) to perform testing to further quantify the effects of important variables where there are deficiencies in the available data; and (3) to initiate long-term testing that will bound glass performance under a range of conditions applicable to repository disposal.

  3. Realizing Sustainability in Facilities Management: a pilot study at the Technical University of Denmark

    DEFF Research Database (Denmark)

    Nielsen, Susanne Balslev; Møller, Jacob Steen; Jäschke, Stefan

    2012-01-01

    shared value. The paper presents a pilot case study on sustainability in facilities management and is intended for a mixed audience of practitioners and researchers. It draws upon the case study findings to establish a baseline of performance and presents practical management implications of integrating...... sustainability in facilities management (FM). Design, methodology and approach: The approach uses an action-oriented research methodology as a means of co-generation of knowledge on realization of sustainability in FM. Case studies take a phased, multi-method approach including organizational profiling...... and value: The paper is based on action research to establish a collaborative framework in late 2011 and the findings of the pilot study, and have not been published before....

  4. EP&R Standards Project Report: Technical Review of National Incident Management Standards

    Energy Technology Data Exchange (ETDEWEB)

    Stenner, Robert D.

    2007-04-24

    The importance and necessity for a fully developed and implemented National Incident Management System (NIMS) has been demonstrated in recent years by the impact of national events such as Hurricane Katrina in 2005. Throughout the history of emergency response to major disasters, especially when multiple response organizations are involved, there have been systemic problems in the consistency and uniformity of response operations. Identifying national standards that support the development and implementation of NIMS is key to helping solve these systemic problems. The NIMS seeks to provide uniformity and consistency for incident management by using common terminology and protocols that will enable responders to coordinate their efforts to ensure an efficient response.

  5. Habitat Evaluation Procedures (HEP) Report; Tacoma/Trimble Area Management Plan, Technical Report 2001-2003.

    Energy Technology Data Exchange (ETDEWEB)

    Entz, Ray; Lockwood, Jr., Neil; Holmes, Darren

    2003-10-01

    In 2000 and 2001, the Kalispel Natural Resource Department (KNRD) continued to mitigate the wildlife habitat losses as part of the Albeni Falls Wildlife Mitigation Project. Utilizing Bonneville Power Administration (BPA) funds, the Kalispel Tribe of Indians (Tribe) purchased three projects totaling nearly 1,200 acres. The Tacoma/Trimble Wildlife Management Area is a conglomeration of properties now estimated at 1,700 acres. It is the Tribe's intent to manage these properties in cooperation and collaboration with the Pend Oreille County Public Utility District (PUD) No. 1 and the U.S. Fish and Wildlife Service (USFWS) to benefit wildlife habitats and associated species, populations, and guilds.

  6. Technical Evaluation Report 30: Vendor-Assisted Evaluation of a Learning Management System

    Directory of Open Access Journals (Sweden)

    Adrienne De Schutter

    2004-04-01

    Full Text Available A product evaluation was conducted of Desire2Learn, an online learning management system gaining popularity in educational institutions. Since an online trial version of the software was not available for evaluation, an inspection meeting with the vendor was arranged. This provided the evaluation team with an opportunity to examine the precautions necessary for ensuring the objectivity of a product evaluation based on vendor-supplied information. The report outlines the team’s use of evaluator-driven enquiry and a triangulated approach to information checking. The Desire2Learn product is assessed as a flexible and useful addition to the range of learning management system options.

  7. Comparison between EDXRF and FAAS for Zn determination in terrestrial molluscs

    Energy Technology Data Exchange (ETDEWEB)

    Melo, Julyanne T.B.; Cantinha, Rebeca S.; Santos, Mariana L.O.; Santos, Katarine M.B.; Franca, Elvis J., E-mail: julyanne.melo@ufpe.br, E-mail: rebecanuclear@gmail.com, E-mail: marianasantos_ufpe@hotmail.com, E-mail: katarine.mizan@gmail.com, E-mail: ejfranca@cnen.gov.br [Centro Regional de Ciencias Nucleares do Nordeste (CRCN-NE/CNEN-PE), Recife, PE (Brazil); Melo, Ana M.M.A., E-mail: amdemelo@hotmail.com [Universidade Federal de Pernambuco (UFPE), Recife, PE (Brazil). Departamento de Biofisica e Radiobiologia

    2015-07-01

    Even with the most advanced analytical techniques, achieving the true values of a given analyte in a sample cannot be an easy task. Energy Dispersive X-Ray Fluorescence (EDXRF) and Flame Atomic Absorption Spectrometry (FAAS) have been widely used for analysis of the chemical composition of biological matrices in environmental studies. However, depending on the sample matrix, a combination of techniques could be needed for the correct determination of the analyte. Zinc distribution in Littoraria angulifera and Melampus coffea is quite dependent on the environment, so that, diverse methods could be necessary to evaluate the chemical composition of these mollusks. This study aimed at the comparison between EDXRF and FAAS techniques for determining Zn in the soft tissues of terrestrial mollusks. The animals were collected in three mangroves in the State of Pernambuco, Brazil. After shell removal, tissues were lyophilized and milled in a mortar. Test portions of 500 mg were analyzed by EDXRF, followed by chemical treatment for FAAS analysis. For the quality of the analytical procedure, the standard reference material SRM 2976 Mussel Tissue was analyzed together with the samples. The results for the analysis of the certified reference material SRM 2976 indicated the quality of the analytical procedure for both techniques. Adjusted-R{sup 2} between EDXRF and FAAS results was 0.95, indicating a good equivalence of Zn determination by both techniques. However, some improvement of EDXRF determination could be necessary because of the tendency of lower results compared to FAAS, probably related to spectral interferences during the analysis. (author)

  8. Military Curricula for Vocational and Technical Education. Traffic Management and Accident Investigation, 17-8.

    Science.gov (United States)

    Air Force, Washington, DC.

    This teaching guide and student workbook for a postsecondary level course in traffic management and accident investigation is one of a number of military-developed curriculum packages selected for adaptation to vocational instruction and curriculum development in a civilian setting. Purpose stated for the 132-hour course is to expose students to…

  9. A technical investigation on tools and concepts for sustainable management of the subsurface in The Netherlands

    NARCIS (Netherlands)

    Griffioen, J.; Wensem, J. van; Oomes, J.L.M.; Barends, F.; Breunese, J.; Bruining, H.; Olsthoorn, T.; Stams, A.J.M.; Stoel, A.E.C. van der

    2014-01-01

    In response to increasing use of the subsurface, there is a need to modernise policies on sustainable use of the subsurface. This holds in particular for the densely populated Netherlands. We aimed to analyse current practice of subsurface management and the associated pressure points and to establi

  10. A technical investigation on tools and concepts for sustainable management of the subsurface in The Netherlands.

    NARCIS (Netherlands)

    Griffioen, J.; Wensem, van J.; Oomes, J.L.; Barends, F.; Breunese, J.; Bruining, H.; Olsthoorn, T.; Stams, A.J.M.; Stoel, van der A.E.

    2014-01-01

    In response to increasing use of the subsurface, there is a need to modernise policies on sustainable use of the subsurface. This holds in particular for the densely populated Netherlands. We aimed to analyse current practice of subsurface management and the associated pressure points and to establi

  11. MULTIAGENT TECHNOLOGIES’ METHOD IN MANAGING BUSINESS-PROCESSES OF THE TECHNICAL PREPARING FOR PRODUCTION

    Directory of Open Access Journals (Sweden)

    P.N. Pavlenko

    2005-02-01

    Full Text Available  The method of managing the process of the extended productions technological preparation is given. The method is used for integrating the automated systems of industrial assignment of  CAD/CAM/SAPP and ERP systems.

  12. An Introduction to the NCHEMS Costing and Data Management System. Technical Report No. 55.

    Science.gov (United States)

    Haight, Mike; Martin, Ron

    The NCHEMS Costing and Data Management System is designed to assist institutions in the implementation of cost studies. There are at least two kinds of cost studies: historical cost studies which display cost-related data that reflect actual events over a specific prior time period, and predictive cost studies which forecast costs that will be…

  13. Management support services to the Office of Utility Technologies. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    1993-12-16

    The Office of Utility Technologies works cooperatively with industry and the utility sector to realize the market potential for energy efficiency and renewable energy technologies. Under this contract, BNF has provided management support services for OUT R&D activities for the following Program offices: (1) Office of Energy Management; (2) Office of Solar Energy Conversion; (3) Office of Renewable Energy Conversion; and (4) Deputy Assistant Secretary. During the period between 4/17/91 and 9/17/93, BNF furnished the necessary personnel, equipment, materials, facilities and travel required to provide management support services for each of the above Program Offices. From 9/18/93 to 12/17/93, BNF has been involved in closeout activities, including final product deliverables. Research efforts that have been supported in these Program Offices are: (1) for Energy Management -- Advanced Utility Concepts Division; Utility Systems Division; Integrated Planning; (2) for Solar Energy Conversion -- Photovoltaics Division; Solar Thermal and Biomass Power Division; (3) for Renewable Energy Conversion -- Geothermal Division; Wind, Hydroelectric and Ocean Systems Division; (4) for the Deputy Assistant Secretary -- support as required by the Supporting Staff. This final report contains summaries of the work accomplished for each of the Program Offices listed above.

  14. Training Needs Assessment of Technical Skills in Managers of Tehran Electricity Distribution Company

    Science.gov (United States)

    Koohi, Amir Hasan; Ghandali, Fatemeh; Dehghan, Hasan; Ghandali, Najme

    2016-01-01

    Current dissertation has been conducted in order to investigate and detect training needs of the mangers (top and middle) in Tehran Electricity Distribution Company. Research method is applied kind based on its purpose. Due to data collection method, this query is descriptive-survey type. Statistical population in this study is all of managers in…

  15. Technical Evaluation Report 24: Open Source Software: an alternative to costly Learning Management Systems

    Directory of Open Access Journals (Sweden)

    Jim Depow

    2003-10-01

    Full Text Available This is the first in a series of two reports discussing the use of open source software (OSS and free software (FS in online education as an alternative to expensive proprietary software. It details the steps taken in a Canadian community college to download and install the Linux Operating System in order to support an OSS/ FS learning management system (LMS.

  16. Discussion on Management Work of Professional and Technical Personnel%做好专业技术人员管理工作浅谈

    Institute of Scientific and Technical Information of China (English)

    常卫华

    2011-01-01

    Professional and technical personnel is the main human resource in hospital, the management of professional and technical personnel is the key work of hospital human resource management.Managers should, according to the characteristics of professional and technical personnel, explore the principle of their growth pattern, perfect the managing mechanism constantly and improve their positive enthusiasm, as well as provide them with sufficient space for development, manage the professional and technical personnel with heart and reassure their devotion for hospitalst.%专业技术人员是医院人力资源的主体,管理专业技术人员是医院人力资源工作的重点.管理者应针对专业技术人员的特点,探寻专业技术人员成长规律,不断完善管理机制,积极提高他们的工作热情,为他们提供充足的发展空间,用心管理专业技术人员,使他们安心工作,为医院事业发展贡献力量.

  17. Multiple-use Management of Irrigation Systems: Technical Constraints and Challenges

    Science.gov (United States)

    Gowing, J.; Li, Q.; Mayilswami, C.; Gunawardhana, K.

    It is now widely recognised that many irrigation systems, originally planned only for irrigation supply, are de facto multiple-use systems. However, the importance of non- irrigation uses (such as bathing, laundry, livestock watering and fishing), to the liveli- hoods of the rural poor has generally been ignored. This has significant implications for irrigation engineers, water resources managers and other decision-makers. An im- proved understanding of competition and complementarity between these uses and irrigation demands is essential for effective multiple-use management of irrigation systems.This paper presents a study of multiple-use management, where the focus is on integrating aquaculture within irrigation systems with and without secondary storage. The Lower Bhavani scheme in South India and Mahaweli System H in Sri- Lanka were selected as representative smallholder irrigation schemes: - The Lower Bhavani scheme comprises a 200km contour canal serving a command area of 78,500ha. Apart from the main dam, there are no storage structures within the irriga- tion system. - Mahaweli System H comprises a command area of 43,000ha served by three main canals. The feature of particular interest in this scheme is the large number of secondary storage structures (known locally as tanks), which are in- tegrated within the canal network. It is apparent from these two sites and from studies elsewhere that non-irrigation uses are important to the livelihoods of the local peo- ple, but these uses are largely opportunistic. The failure to give explicit recognition to non-irrigation uses has important implications for assessments of economic per- formance and water productivity of irrigation systems. However, any attempt to give proper recognition to these alternative uses also has implication for irrigation project management. This paper describes a detailed study of water management in the two irrigation systems. The method of investigation involves in-depth studies in

  18. Double row spacing and drip irrigation as technical options in energy sorghum management

    Directory of Open Access Journals (Sweden)

    Neri Roncucci

    2014-02-01

    Full Text Available The effect of two row spacing configurations and four water supply levels was investigated on sweet and fibre sorghum in Central Italy for two consecutive years. Results highlighted the influence of both irrigation and row spatial configuration on crop productivity. Indeed, several studies have pointed out the positive response of sorghum to irrigation in Mediterranean climate, as in this environment water stress represents one of the main limiting factors on crop productivity. On the other hand, few attempts have been made to explore the role of row spacing on energy sorghum productivity. Results outlined an average increase in sorghum dry biomass yield ranging from +23% to +79% at variable rates of water supply as compared to rainfed control. The positive effect of irrigation was also observed on leaf area index and radiation use efficiency. Moreover, we observed a crop yield increase, from 9% to 20%, under double row spacing compared to the standard planting pattern (i.e. single row spacing. Finally, it was confirmed the efficient use of water by sorghum and the great ability of sorghum to increase its biomass yield in response to increasing volumes of water supplied. Therefore, this work suggests how row spacing configuration and drip irrigation could be feasible technical options to increase sorghum biomass yields in Mediterranean environments. These techniques should be experienced by farmers towards a sustainable intensification of current cropping systems.

  19. Technical/ administrative options for managing tritium MCL exceedances in P-area groundwater and Steel Creek

    Energy Technology Data Exchange (ETDEWEB)

    Ross, J. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2017-04-01

    This white paper was requested by the Core Team (United States Department of Energy [USDOE], United States Environmental Protection Agency [USEPA], and South Carolina Department of Health and Environmental Control [SCDHEC]) at the P-Area Groundwater (PAGW) Operable Unit (OU) Scoping Meeting held in January 2017 to discuss recent data and potential alternatives in support of a focused Corrective Measures Study/Feasibility Study (CMS/FS). This white paper presents an overview of the problem, and a range of technical and administrative options for addressing the tritium contamination in groundwater and Steel Creek. As tritium cannot be treated practicably, alternatives are limited to media transfer, containment and natural attenuation principally relying on radioactive decay. Using other groundwater OU decisions involving tritium as precedent, Savannah River Nuclear Solutions (SRNS) recommends that final tritium alternatives be evaluated in a CMS/FS, understanding that the likely preferred remedy will include natural attenuation with land use controls (LUCs). This is based on the inability to significantly reduce tritium impact to Steel Creek using an engineered solution as compared to natural attenuation. The timing of this evaluation could be conducted concurrently with the final remedy evaluation for volatile organic compounds (VOCs).

  20. Transformation of technical infrastructure

    DEFF Research Database (Denmark)

    Nielsen, Susanne Balslev

    1998-01-01

    article about the need of new planning forums in order to initiate transformations with in management of large technical systems for energy, waste and water supply.......article about the need of new planning forums in order to initiate transformations with in management of large technical systems for energy, waste and water supply....

  1. Management Overview of System Technical Support Plan for the FIREFINDER System Support Center.

    Science.gov (United States)

    1980-08-06

    office spaces h. Cassette duplicating i. Configuration management A- 2 I/ APPENDIX B FFSSC EQUIPMENT This appendix delineates the equipment required by...TSG The Surgeon General TWT Traveling Wave Tube USACDC U.S. Army Combat Developments Command USACSC U.S. Army Computer Systems Command USAEPG U.S. Army...commands and agencies will follow to ensure that the Army has trained and qualified personnel to operate and maintain new or modified systems and equipment

  2. Radiological management of patients with urinary obstruction following urinary diversion procedures: technical factors, complications, long-term management and outcome. Experience with 378 procedures.

    LENUS (Irish Health Repository)

    Maher, M M

    2012-02-03

    We aimed to assess management by interventional radiology techniques of patients with urinary diversion procedures (UD) complicated by urinary obstruction (UO). A 12-year electronic database of interventional cases was searched for urinary access in patients with UD. Patients\\' records were assessed for aetiology of obstruction, indication for procedure, types of interventional radiology, complications and outcome. Management issues included frequency of visits for catheter care, type of catheter placement and technical problems associated with catheter maintenance. Three hundred and seventy eight procedures were carried out in 25 patients (mean age 70 years; Male : Female ratio 13:12). Indications for UD were malignancy (n = 22) and neuropathic bladder (n = 3). UD included ileal conduits (n = 17), cutaneous ureterostomy (n = 3 (2 patients)) and sigmoid colon urinary conduit (n = 6). In most patients, catheters were placed antegradely through nephrostomy tract, but subsequent access was through the UD. Twenty of 25 patients had unilateral stents where as 5 had bilateral stents (8-10- Fr pigtail catheters (20-45 cm in length)). The mean number of procedures including catheter changes was 15 +\\/- 4 per patient and 331 of 378 procedures (87 %) were carried out as outpatients. Since catheter placement, 11 patients required hospital admission on 22 occasions for catheter-related complications. Ureteric strictures in patients with UD can be successfully managed by interventional radiology.

  3. Final Scientific/Technical Report: Context-Aware Smart Home Energy Manager (CASHEM)

    Energy Technology Data Exchange (ETDEWEB)

    Foslien, Wendy K. [Honeywell International Inc., Golden Valley, MN (United States); Curtner, Keith L. [Honeywell International Inc., Golden Valley, MN (United States)

    2013-01-15

    Because of growing energy demands and shortages, residential home owners are turning to energy conservation measures and smart home energy management devices to help them reduce energy costs and live more sustainably. In this context, the Honeywell team researched, developed, and tested the Context Aware Smart Home Energy Manager (CASHEM) as a trusted advisor for home energy management. The project focused on connecting multiple devices in a home through a uniform user interface. The design of the user interface was an important feature of the project because it provided a single place for the homeowner to control all devices and was also where they received coaching. CASHEM then used data collected from homes to identify the contexts that affect operation of home appliances. CASHEM's goal was to reduce energy consumption while keeping the user's key needs satisfied. Thus, CASHEM was intended to find the opportunities to minimize energy consumption in a way that fit the user's lifestyle.

  4. Technical note: Efficient online source identification algorithm for integration within a contamination event management system

    Science.gov (United States)

    Deuerlein, Jochen; Meyer-Harries, Lea; Guth, Nicolai

    2017-07-01

    Drinking water distribution networks are part of critical infrastructures and are exposed to a number of different risks. One of them is the risk of unintended or deliberate contamination of the drinking water within the pipe network. Over the past decade research has focused on the development of new sensors that are able to detect malicious substances in the network and early warning systems for contamination. In addition to the optimal placement of sensors, the automatic identification of the source of a contamination is an important component of an early warning and event management system for security enhancement of water supply networks. Many publications deal with the algorithmic development; however, only little information exists about the integration within a comprehensive real-time event detection and management system. In the following the analytical solution and the software implementation of a real-time source identification module and its integration within a web-based event management system are described. The development was part of the SAFEWATER project, which was funded under FP 7 of the European Commission.

  5. Spent Fuel Test-Climax: technical measurements data management system description and data presentation

    Energy Technology Data Exchange (ETDEWEB)

    Carlson, R.C.

    1985-08-01

    The Spent Fuel Test-Climax (SFT-C) was located 420 m below surface in the Climax Stock granite on the Nevada Test Site. The test was conducted under the technical direction of the Lawrence Livermore National Laboratory (LLNL) as part of the Nevada Nuclear Waste Storage Investigations (NNWSI) for the US Department of Energy. Eleven canisters of spent nuclear reactor fuel were emplaced, along with six electrical simulators, in April-May 1980. The spent fuel canisters were retrieved and the electrical simulators de-energized in March-April 1983. During the test, just over 1000 MW-hr of thermal energy was deposited in the site, causing temperature changes 100{sup 0}C near the canisters, and about 5{sup 0} in the tunnels. More than 900 channels of geotechnical, seismological, and test status data were recorded on nearly continuous basis for about 3-1/2 years, ending in September 1983. Most geotechnical instrumentation was known to be temperature sensitive, and thus would require temperature compensation before interpretation. Accordingly, a 10-in. reel of digital tape was off-loaded and shipped to Livermore every 4 to 8 weeks, where the data were verified, organized into 45 one-million-word files, and temperature corrected. The purpose of this report is to document the receipt and processing of the data by LLNL Livermore personnel, present facts about the history of the instruments which may be important to the interpretation of the data, present the data themselves in graphical form for each instrument over its operating lifetime, document the forms and locations in which the data will be archived, and offer the data to the geotechnical community for future use in understanding and predicting the effects of the storage of heat-generating waste in hard rocks such as granite.

  6. Optimal power flow for technically feasible Energy Management systems in Islanded Microgrids

    DEFF Research Database (Denmark)

    Sanseverino, Eleonora Riva; T. T. Quynh, T.; Di Silvestre, Maria Luisa

    2016-01-01

    flow is carried out using a Glow-worm Swarm Optimizer. The control level is organized into two different sub-levels, the highest of which accounts for minimum cost operation and the lowest one solving the optimal power flow and devising the set points of inverter interfaced generation units......This paper presents a combined optimal energy and power flow management for islanded microgrids. The highest control level in this case will provide a feasible and optimized operating point around the economic optimum. In order to account for both unbalanced and balanced loads, the optimal power...

  7. DEVELOPMENT OF AN INTEGRATED APPROACH OF QUALITY MANAGEMENT IN DIFFICULT TECHNICAL PROCESSES

    Directory of Open Access Journals (Sweden)

    Victor NORDIN

    2015-01-01

    Full Text Available The article presents the results of studies conducted in a company manufacturing aluminium forgings for the automotive industry. The aim of the research was to identify the defects which form during the production process as well as the locations and causes of their occurrence. Selected quality management tools were used in the process. Based on the FMEA and the costs generated by the identified defects, a hierarchy of them was created for the company along with a proposal of improvements in case of the most significant ones in order to reduce their number and increase the detec-tion efficiency.

  8. Recent progress in competitive intelligence, competitive technical intelligence and knowledge management

    Directory of Open Access Journals (Sweden)

    Dou Henri

    2011-04-01

    Full Text Available This paper discusses the role of competitive intelligence and knowledge management to create, maintain and sustain competitive advantages. The triple helix model, based on the integration of the public sector (government, business models (private corporations and universities to promote innovation is examined. Research trends in competitive intelligence are presented. It concludes that the systematic use of the technology monitoring should support the comparison between various business models of companies that hold the market best practices and form a basis to knowledge for the decision making process and strategies development.

  9. Nanotechnology-based drug delivery systems for Alzheimer's disease management: Technical, industrial, and clinical challenges.

    Science.gov (United States)

    Wen, Ming Ming; El-Salamouni, Noha S; El-Refaie, Wessam M; Hazzah, Heba A; Ali, Mai M; Tosi, Giovanni; Farid, Ragwa M; Blanco-Prieto, Maria J; Billa, Nashiru; Hanafy, Amira S

    2017-01-10

    Alzheimer's disease (AD) is a neurodegenerative disease with high prevalence in the rapidly growing elderly population in the developing world. The currently FDA approved drugs for the management of symptomatology of AD are marketed mainly as conventional oral medications. Due to their gastrointestinal side effects and lack of brain targeting, these drugs and dosage regiments hinder patient compliance and lead to treatment discontinuation. Nanotechnology-based drug delivery systems (NTDDS) administered by different routes can be considered as promising tools to improve patient compliance and achieve better therapeutic outcomes. Despite extensive research, literature screening revealed that clinical activities involving NTDDS application in research for AD are lagging compared to NTDDS for other diseases such as cancers. The industrial perspectives, processability, and cost/benefit ratio of using NTDDS for AD treatment are usually overlooked. Moreover, active and passive immunization against AD are by far the mostly studied alternative AD therapies because conventional oral drug therapy is not yielding satisfactorily results. NTDDS of approved drugs appear promising to transform this research from 'paper to clinic' and raise hope for AD sufferers and their caretakers. This review summarizes the recent studies conducted on NTDDS for AD treatment, with a primary focus on the industrial perspectives and processability. Additionally, it highlights the ongoing clinical trials for AD management.

  10. The development of a learning management system for dental radiology education: A technical report

    Science.gov (United States)

    Chang, Hee-Jin; Symkhampha, Khanthaly; Huh, Kyung-Hoe; Yi, Won-Jin; Lee, Sam-Sun; Choi, Soon-Chul

    2017-01-01

    Purpose This study was conducted to suggest the development of a learning management system for dental radiology education using the Modular Object-Oriented Dynamic Learning Environment (Moodle). Materials and Methods Moodle is a well-known and verified open-source software-learning management system (OSS-LMS). The Moodle software was installed on a server computer and customized for dental radiology education. The system was implemented for teaching undergraduate students to diagnose dental caries in panoramic images. Questions were chosen that could assess students' diagnosis ability. Students were given several questions corre-sponding to each of 100 panoramic images. Results The installation and customization of Moodle was feasible, cost-effective, and time-saving. By having students answer questions repeatedly, it was possible to train them to examine panoramic images sequentially and thoroughly. Conclusion Based on its educational efficiency and efficacy, the adaptation of an OSS-LMS in dental school may be highly recommended. The system could be extended to continuing education for dentists. Further studies on the objective evaluation of knowledge acquisition and retention are needed. PMID:28361030

  11. Model-based system engineering approach for the Euclid mission to manage scientific and technical complexity

    Science.gov (United States)

    Lorenzo Alvarez, Jose; Metselaar, Harold; Amiaux, Jerome; Saavedra Criado, Gonzalo; Gaspar Venancio, Luis M.; Salvignol, Jean-Christophe; Laureijs, René J.; Vavrek, Roland

    2016-08-01

    In the last years, the system engineering field is coming to terms with a paradigm change in the approach for complexity management. Different strategies have been proposed to cope with highly interrelated systems, system of systems and collaborative system engineering have been proposed and a significant effort is being invested into standardization and ontology definition. In particular, Model Based System Engineering (MBSE) intends to introduce methodologies for a systematic system definition, development, validation, deployment, operation and decommission, based on logical and visual relationship mapping, rather than traditional 'document based' information management. The practical implementation in real large-scale projects is not uniform across fields. In space science missions, the usage has been limited to subsystems or sample projects with modeling being performed 'a-posteriori' in many instances. The main hurdle for the introduction of MBSE practices in new projects is still the difficulty to demonstrate their added value to a project and whether their benefit is commensurate with the level of effort required to put them in place. In this paper we present the implemented Euclid system modeling activities, and an analysis of the benefits and limitations identified to support in particular requirement break-down and allocation, and verification planning at mission level.

  12. Red River Wildlife Management Area HEP Report, Habitat Evaluation Procedures, Technical Report 2004.

    Energy Technology Data Exchange (ETDEWEB)

    Ashley, Paul

    2004-11-01

    A habitat evaluation procedures (HEP) analysis conducted on the 314-acre Red River Wildlife Management Area (RRWMA) managed by the Idaho Department of Fish and Game resulted in 401.38 habitat units (HUs). Habitat variables from six habitat suitability index (HSI) models, comprised of mink (Mustela vison), mallard (Anas platyrhynchos), common snipe (Capella gallinago), black-capped chickadee (Parus altricapillus), yellow warbler (Dendroica petechia), and white-tailed deer (Odocoileus virginianus), were measured by Regional HEP Team (RHT) members in August 2004. Cover types included wet meadow, riverine, riparian shrub, conifer forest, conifer forest wetland, and urban. HSI model outputs indicate that the shrub component is lacking in riparian shrub and conifer forest cover types and that snag density should be increased in conifer stands. The quality of wet meadow habitat, comprised primarily of introduced grass species and sedges, could be improved through development of ephemeral open water ponds and increasing the amount of persistent wetland herbaceous vegetation e.g. cattails (Typha spp.) and bulrushes (Scirpus spp.).

  13. Geographic Information System technology applications to Ground-Water Management Program, EPA Region 3. Technical report

    Energy Technology Data Exchange (ETDEWEB)

    Clibanoff, A.

    1989-01-01

    The report is part of the National Network for Environmental Management Studies under the auspices of the Office of Cooperative Environmental Management of the U.S. Environmental Protection Agency. GIS technology is a computer informational system that stores, analyzes, and manipulates both spatial and non-spatial data. Base map information for the GIS has come primarily from the USGS. Data for the entire Region at the 1:2,000,000 scale and for some of the Region at the 1:100,000 scale is currently being used. Data from GIRAS, a land use Database, at the 1:250,000 also exists for much of the Region. Information is contributed to the GIS from various sources including but not limited to RCRA, CERCLA, UIC, and UST programs. The WHP program is also being tapped to identify locations of public water supply wells. Region III is interested in any data that accurately describes the ground water condition in a given area. In Regional pilot studies being conducted, GIS is being employed at both the regional and county level. The goals of the pilot studies include the identification of areas of ground water susceptibility and major sources of ground water contamination, and prioritizing the Region's ground water supplies in terms of vulnerability to pollution and risk to the population.

  14. The development of a learning management system for dental radiology education: A technical report

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Hee Jin; Huh, Kyung Hoe; Yi, Won Jin; Heo, Min Suk; Lee, Sam Sun; Choi, Soon Chul [Dept. of Oral and Maxillofacial Radiology and Dental Research Institute, School of Dentistry, Seoul National University, Seoul (Korea, Republic of); Symkhampha, Khanthaly [Div. of Oral and Maxillofacial Radiology, Dept. of Basic Science, Faculty of Dentistry, University of Health Sciences, Vientiane (Lao People' s Democratic Republic)

    2017-03-15

    This study was conducted to suggest the development of a learning management system for dental radiology education using the Modular Object-Oriented Dynamic Learning Environment (Moodle). Moodle is a well-known and verified open-source software-learning management system (OSS-LMS). The Moodle software was installed on a server computer and customized for dental radiology education. The system was implemented for teaching undergraduate students to diagnose dental caries in panoramic images. Questions were chosen that could assess students' diagnosis ability. Students were given several questions corresponding to each of 100 panoramic images. The installation and customization of Moodle was feasible, cost-effective, and time-saving. By having students answer questions repeatedly, it was possible to train them to examine panoramic images sequentially and thoroughly. Based on its educational efficiency and efficacy, the adaptation of an OSS-LMS in dental school may be highly recommended. The system could be extended to continuing education for dentists. Further studies on the objective evaluation of knowledge acquisition and retention are needed.

  15. Management of dry flue gas desulfurization by-products in underground mines. Quarterly technical progress report, April 1995--June 1995

    Energy Technology Data Exchange (ETDEWEB)

    Chugh, Y.P.; Dutta, D.; Esling, S. [and others

    1995-07-01

    On September 30, 1993, the U.S. Department of Energy-Morgantown Energy Technology Center and Southern Illinois University at Carbondale (SIUC) entered into a cooperative research agreement entitled {open_quotes}Management of Dry Flue Gas Desulfurization By-Products in Underground Mines{close_quotes} (DE-FC21-93MC30252). Under the agreement Southern Illinois University at Carbondale will develop and demonstrate several technologies for the placement of coal combustion residues in abandoned coal mines, and will assess the environmental impact of such underground residues placement. Previous quarterly Technical Progress Reports have set forth the specific objectives of the program, and a discussion of these is not repeated here. Rather, this report discusses the technical progress made during the period April 1 - June 30, 1995. A final topical report on the SEEC, Inc. demonstration of its technology for the transporting of coal combustion residues was completed during the quarter, although final printing of the report was accomplished early in July, 1995. The SEEC technology involves the use of Collapsible Intermodal Containers (CIC`s) developed by SEEC, and the transportation of such containers - filled with fly ash or other coal combustion residues - on rail coal cars or other transportation means. Copies of the final topical report, entitled {open_quotes}The Development and Testing of Collapsible Intermodal Containers for the Handling and Transport of Coal Combustion Residues{close_quotes} were furnished to the Morgantown Energy Technology Center. The Rapid Aging Test colums were placed in operation during the quarter. This test is to determine the long-term reaction of both the pneumatic and hydraulic mixtures to brine as a leaching material, and simulates the conditions that will be encountered in the actual underground placement of the coal combustion residues mixtures. The tests will continue for about one year.

  16. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball

    2010-01-01

    Operational Experience At the end of the first full-year running period of LHC, CMS is established as a reliable, robust and mature experiment. In particular common systems and infrastructure faults accounted for <0.6 % CMS downtime during LHC pp physics. Technical operation throughout the entire year was rather smooth, the main faults requiring UXC access being sub-detector power systems and rack-cooling turbines. All such problems were corrected during scheduled technical stops, in the shadow of tunnel access needed by the LHC, or in negotiated accesses or access extensions. Nevertheless, the number of necessary accesses to the UXC averaged more than one per week and the technical stops were inevitably packed with work packages, typically 30 being executed within a few days, placing a high load on the coordination and area management teams. It is an appropriate moment for CMS Technical Coordination to thank all those in many CERN departments and in the Collaboration, who were involved in CMS techni...

  17. Habitat Evaluation Procedures (HEP) Report; Precious Lands Wildlife Management Area, Technical Report 2000-2003.

    Energy Technology Data Exchange (ETDEWEB)

    Kozusko, Shana

    2003-12-01

    The Nez Perce Tribe (NPT) currently manages a 15,325 acre parcel of land known as the Precious Lands Wildlife Management Area that was purchased as mitigation for losses incurred by construction of the four lower Snake River dams. The Management Area is located in northern Wallowa County, Oregon and southern Asotin County, Washington (Figure 1). It is divided into three management parcels--the Buford parcel is located on Buford Creek and straddles the WA-OR state line, and the Tamarack and Basin parcels are contiguous to each other and located between the Joseph Creek and Cottonwood Creek drainages in Wallowa County, OR. The project was developed under the Pacific Northwest Electric Power Planning and Conservation Act of 1980 (P.L. 96-501), with funding from the Bonneville Power Administration (BPA). The acreage protected under this contract will be credited to BPA as habitat permanently dedicated to wildlife and wildlife mitigation. A modeling strategy known as Habitat Evaluation Procedure (HEP) was developed by the U.S. Fish and Wildlife Service and adopted by BPA as a habitat equivalency accounting system. Nine wildlife species models were used to evaluate distinct cover type features and provide a measure of habitat quality. Models measure a wide range of life requisite variables for each species and monitor overall trends in vegetation community health and diversity. One product of HEP is an evaluation of habitat quality expressed in Habitat Units (HUs). This HU accounting system is used to determine the amount of credit BPA receives for mitigation lands. After construction of the four lower Snake River dams, a HEP loss assessment was conducted to determine how many Habitat Units were inundated behind the dams. Twelve target species were used in that evaluation: Canada goose, mallard, river otter, downy woodpecker, song sparrow, yellow warbler, marsh wren, western meadowlark, chukar, ring-necked pheasant, California quail, and mule deer. The U.S. Army Corp of

  18. Multiparametric magnetic resonance imaging of the prostate: technical aspects and role in clinical management.

    Science.gov (United States)

    Costa, Daniel N; Pedrosa, Ivan; Roehrborn, Claus; Rofsky, Neil M

    2014-08-01

    The heterogeneity and largely indolent nature of prostate cancer require better tools to avoid overdetection of low-risk disease and improve diagnostic accuracy in high-risk patients. During the last 3 decades, magnetic resonance imaging (MRI) has evolved to become the most accurate imaging technique for prostate cancer detection and staging, with a promising role in risk stratification. Because each MRI technique has advantages and limitations, state of the art of the so-called multiparametric MRI of the prostate is achieved combining anatomical T2-weighted imaging integrated with other techniques in which image contrast is related to the pathophysiology of the disease, such as diffusion-weighted imaging, dynamic contrast-enhanced imaging, and MR spectroscopy. After reviewing this article, readers will understand the clinical challenges in the management of patients with confirmed or suspected prostate cancer, when and how multiparametric MRI of the prostate can provide meaningful information, and how to perform and interpret it.

  19. The identity approach for assessing socio-technical resilience to climate change: example of flood risk management for the Island of Dordrecht

    Directory of Open Access Journals (Sweden)

    B. Gersonius

    2012-07-01

    Full Text Available Recent EU guidance on adaptation calls for the enhancement of socio-technical resilience to climate change. However, socio-technical resilience is relatively poorly defined and this makes it difficult to apply in practice. This paper uses the concept of identity as a vehicle to advance the definition and assessment of socio-technical resilience. Identity comprises four aspects (components, relationships, innovation, and continuity that constitute the minimum of what has to be identified and specified if resilience is to be assessed. Characterising the identity of a socio-technical system requires the conceptualisation of these four aspects in relation to the particular function provided by the system (e.g. flood risk management and also the identification of the specific variables and thresholds that reflect changes in identity. We have demonstrated the utility of the identity approach, using the example of flood risk management for the Island of Dordrecht, the Netherlands. Based on the results, socio-technical resilience has been redefined as the ability of the system to continue to function as expected in the face of change. This definition implies that a system is resilient when it can deliver performance without a change of identity by continuing compliance with standards and expectations.

  20. Extraction of nickel from edible oils with a complexing agent prior to determination by FAAS.

    Science.gov (United States)

    Tokay, Feyzullah; Bağdat, Sema

    2016-04-15

    In the present work, a new extraction method for separation of nickel from edible oils and determination by FAAS is reported. This method is based on extraction of Ni(II) ions from the oil to aqueous phase with N,N'-bis(4-methoxysalicylidene) ethylenediamine (MSE) and determination by FAAS. Properties of the complex formed between MSE and Ni(II) were investigated spectrophotometrically. Central composite design (CCD) was utilized for optimization of MSE to oil, stirring time and temperature, which were 0.97 mL g(-1), 15.4 min, and 29.7°C, respectively. The developed method was tested with an oil-based metal standard and the recovery was 93.8±3.9%. The proposed method was applied with five different edible oils.

  1. ADSORPTION BEHAVIOUR OF Mn(Ⅱ) AND Zn(Ⅱ) ON ATTAPULGITE WITH FAAS METHOD

    Institute of Scientific and Technical Information of China (English)

    LI Bingbing; LI Chunxiang; LIU Aiqin; XIAO Bo

    2008-01-01

    Active attapulbgite as adsorptive reagent, the adsorptive behavior of Mn(Ⅱ) and Zn(Ⅱ) was studied with Flame atomic absorption spectroscopy (FAAS) method.The mainly factors of influencing the adsorption and desorption of Mn(Ⅱ) and Zn(Ⅱ) were discussed.The interference of coexisting ions was investigated, and the actual sample determination from adzuki beans, mung beans and phosphating waste water was conducted with good result.

  2. ADSORPTION BEHAVIOUR OF Mn(Ⅱ) AND Zn(Ⅱ) ON ATTAPULGITE WITH FAAS METHOD

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Active attapulbgite as adsorptive reagent, the adsorptive behavior of Mn(II) and Zn(II) was studied with Flame atomic absorption spectroscopy (FAAS) method. The mainly factors of influencing the adsorption and desorption of Mn(II) and Zn(II) were discussed. The interference of coexisting ions was investigated, and the actual sample determination from adzuki beans, mung beans and phosphating waste water was conducted with good result.

  3. Habitat Evaluation Procedures (HEP) Report; Yakama Nation Wildlife Management Areas, Technical Report 1999-2000.

    Energy Technology Data Exchange (ETDEWEB)

    Raedeke, Kenneth; Raedeke, Dorothy

    2000-06-01

    Construction of the Dalles, Bonneville, McNary, and John Day Dams on the Columbia River by the federal government resulted in a substantial loss of riparian bottomland along the Columbia River. Impacts associated with the Mid-Columbia Projects were assessed for several wildlife species using the Habitat Evaluation Procedures (HEP) developed by the U.S. Fish and Wildlife Service (USDI-FWS 1980). The studies documented the loss of riparian habitat and established a baseline against which mitigation measures could be developed (USDI-FWS 1990 and USDE-BPA 1990). The impact assessments established a mitigation goal, a portion of which would be satisfied by the creation, restoration, and enhancement of riparian lands on tributaries to the Columbia River, including the Yakima Valley. The Yakama Nation (YN), the Northwest Power Planning Council, and the Bonneville Power Administration have agreed that the Yakama Nation would be funded to implement habitat restoration on lands within and adjacent to their reservation. Some of the targeted lands are owned by the Yakama Nation, some are trust lands, and some lands have been in private ownership. Since the early 1990s, the Yakama Nation has been in the process of assembling riparian lands into Wildlife Management Areas, and restoring natural hydrology and natural cover-types on these lands. The Northwest Power Planning Council, through the Bonneville Power Administration, has supported the program. HEP studies were performed by the Yakama Nation in 1990 (Bich et al. 1991) to establish baseline conditions and inventory wildlife habitat at the initiation of the restoration project. The 1990 HEP used a simplified version of the HEP to quantify baseline conditions. The present assessment is designed to evaluate the progress of the mitigation plan in meeting its stated goals. The 1999 HEP assessment has two distinct tasks: (1) Evaluation of the mitigation plan as currently implemented using the simplified YN HEP methodologies for

  4. 国际工程技术管理的思路及创新%Ideas and Innovation on Technical Management for International Projects

    Institute of Scientific and Technical Information of China (English)

    王力尚; 余涛; 朱建潮; 马文龙

    2012-01-01

    通过比较国内外项目工程技术管理的差异,国内外项目工程监理的管理权限差异,国内外工程质量标准的差异,介绍了国际项目管理中对技术管理影响的因素,论述了国际项目工程技术的管理内容和管理思路,并探讨了国际项目技术管理的创新管理.从而实现了降低项目施工成本、向技术要效益的目标.%By comparing the differences between domestic and oversea market in criteria of technical management,management power of engineering supervision,and quality control , the factors which affect technical management in the international projects management are highlighted. Content and ideas of technical management for international projects are introduced, and innovations discussed. By applying these techniques and innovations, the cost of each project can be reduced and profit increased-

  5. Technical management of PACS system%PACS系统的技术管理

    Institute of Scientific and Technical Information of China (English)

    金鑫

    2015-01-01

    本文针对医院数字化和信息化建设中PACS系统的关键作用进行了分析和探讨,比较了传统人工操作方法与PACS系统,最终我们可以发现,通过实施PACS系统,能够使医疗成本降低,使医院医疗质量得以提升;使社会效益以及工作效益得到了提升。有鉴于此,要想使PACS的功能得以实现,就必须要对其进行系统的管理和维护。%Are analyzed and discussed in this paper,a key role for PACS system of hospital digitization and informatization construction,compared with the traditional manual method and PACS system,finally we can discover,through the implementation of PACS system, which can reduce the medical cost,make the hospital medical quality can be improved;the social benefit and the work efficiency has been ascension.In view of this,in order to make the PACS function can be achieved, must carry on the management and maintenance of the system on the.

  6. Information management architecture for an integrated computing environment for the Environmental Restoration Program. Environmental Restoration Program, Volume 3, Interim technical architecture

    Energy Technology Data Exchange (ETDEWEB)

    1994-09-01

    This third volume of the Information Management Architecture for an Integrated Computing Environment for the Environmental Restoration Program--the Interim Technical Architecture (TA) (referred to throughout the remainder of this document as the ER TA)--represents a key milestone in establishing a coordinated information management environment in which information initiatives can be pursued with the confidence that redundancy and inconsistencies will be held to a minimum. This architecture is intended to be used as a reference by anyone whose responsibilities include the acquisition or development of information technology for use by the ER Program. The interim ER TA provides technical guidance at three levels. At the highest level, the technical architecture provides an overall computing philosophy or direction. At this level, the guidance does not address specific technologies or products but addresses more general concepts, such as the use of open systems, modular architectures, graphical user interfaces, and architecture-based development. At the next level, the technical architecture provides specific information technology recommendations regarding a wide variety of specific technologies. These technologies include computing hardware, operating systems, communications software, database management software, application development software, and personal productivity software, among others. These recommendations range from the adoption of specific industry or Martin Marietta Energy Systems, Inc. (Energy Systems) standards to the specification of individual products. At the third level, the architecture provides guidance regarding implementation strategies for the recommended technologies that can be applied to individual projects and to the ER Program as a whole.

  7. THE DOE OFFICE OF ENVIRONMENTAL MANAGEMENT INTERNATIONAL COOPERATIVE PROGRAM: OVERVIEW OF TECHNICAL TASKS AND RESULTS

    Energy Technology Data Exchange (ETDEWEB)

    Marra, J.; Fox, K.; Farfan, E.; Jannik, T.

    2009-12-08

    The DOE Office of Environmental Management (DOE-EM) Office of Engineering and Technology is responsible for implementing EM's International Cooperative Program. Over the past 15 years, collaborative work has been conducted through this program with researchers in Russia, Ukraine, France, United Kingdom and Republic of Korea. Currently, work is being conducted with researchers in Russia and Ukraine. Efforts aimed at evaluating and advancing technologies to support U.S. high-level waste (HLW) vitrification initiatives are being conducted in collaboration with Russian researchers. Work at Khlopin Radium Institute (KRI) is targeted at improving the throughput of current vitrification processes by increasing melting rate. These efforts are specifically targeted at challenging waste types identified at the Savannah River Site (SRS) and Hanford Site. The objectives of current efforts at SIA Radon are to gain insight into vitrification process limits for the cold crucible induction melter (CCIM) technology. Previous demonstration testing has shown that the CCIM offers the potential for dramatic increases in waste loading and waste throughput. However, little information is known regarding operational limits that could affect long-term, efficient CCIM operations. Collaborative work with the Russian Electrotechnical University (ETU) 'LETI' is aimed at advancing CCIM process monitoring, process control and design. The goal is to further mature the CCIM technology and to establish it as a viable HLW vitrification technology. The greater than two year effort conducted with the International Radioecology Laboratory in the Ukraine recently completed. The objectives of this study were: to assess the long-term impacts to the environment from radiation exposure in the Chernobyl Exclusion Zone (ChEZ); and to provide information on remediation guidelines and ecological risk assessment within radioactively contaminated territories around the Chernobyl Nuclear Power Plant

  8. The DOE Office of Environmental Management International Cooperative Program: Overview of Technical Tasks and Results

    Energy Technology Data Exchange (ETDEWEB)

    Marra, James C.; Fox, Kevin M.; Jannik, Gerald T.; Farfan, Eduardo B.; Kim, Dong-Sang; Vienna, John D.; Roach, Jay; Aloy, A. S.; Stefanovsky, S. V.; Lopukh, D. B.; Bondarkov, M. D.; Gerdes, Kurt D.; Han, Ana M.

    2010-01-22

    The DOE Office of Environmental Management (DOE-EM) Office of Engineering and Technology is responsible for implementing EM’s International Cooperative Program. Over the past 15 years, collaborative work has been conducted through this program with researchers in Russia, Ukraine, France, United Kingdom and Republic of Korea. Currently, work is being conducted with researchers in Russia and Ukraine. Efforts aimed at evaluating and advancing technologies to support U.S. high-level waste (HLW) vitrification initiatives are being conducted in collaboration with Russian researchers. Work at Khlopin Radium Institute (KRI) is targeted at improving the throughput of current vitrification processes by increasing melting rate. These efforts are specifically targeted at challenging waste types identified at the Savannah River Site (SRS) and Hanford Site. The objectives of current efforts at SIA Radon are to gain insight into vitrification process limits for the cold crucible induction melter (CCIM) technology. Previous demonstration testing has shown that the CCIM offers the potential for dramatic increases in waste loading and waste throughput. However, little information is known regarding operational limits that could affect long-term, efficient CCIM operations. Collaborative work with the Russian Electrotechnical University (ETU) “LETI” is aimed at advancing CCIM process monitoring, process control and design. The goal is to further mature the CCIM technology and to establish it as a viable HLW vitrification technology. The greater than two year effort conducted with the International Radioecology Laboratory in the Ukraine recently completed. The objectives of this study were: to assess the long-term impacts to the environment from radiation exposure in the Chernobyl Exclusion Zone (ChEZ); and to provide information on remediation guidelines and ecological risk assessment within radioactively contaminated territories around the Chernobyl Nuclear Power Plant (Ch

  9. THE DOE OFFICE OF ENVIRONMENTAL MANAGEMENT INTERNATIONAL COOPERATIVE PROGRAM: OVERVIEW OF TECHNICAL TASKS AND RESULTS

    Energy Technology Data Exchange (ETDEWEB)

    Marra, J.; Fox, K.; Farfan, E.; Jannik, T.

    2009-12-08

    The DOE Office of Environmental Management (DOE-EM) Office of Engineering and Technology is responsible for implementing EM's International Cooperative Program. Over the past 15 years, collaborative work has been conducted through this program with researchers in Russia, Ukraine, France, United Kingdom and Republic of Korea. Currently, work is being conducted with researchers in Russia and Ukraine. Efforts aimed at evaluating and advancing technologies to support U.S. high-level waste (HLW) vitrification initiatives are being conducted in collaboration with Russian researchers. Work at Khlopin Radium Institute (KRI) is targeted at improving the throughput of current vitrification processes by increasing melting rate. These efforts are specifically targeted at challenging waste types identified at the Savannah River Site (SRS) and Hanford Site. The objectives of current efforts at SIA Radon are to gain insight into vitrification process limits for the cold crucible induction melter (CCIM) technology. Previous demonstration testing has shown that the CCIM offers the potential for dramatic increases in waste loading and waste throughput. However, little information is known regarding operational limits that could affect long-term, efficient CCIM operations. Collaborative work with the Russian Electrotechnical University (ETU) 'LETI' is aimed at advancing CCIM process monitoring, process control and design. The goal is to further mature the CCIM technology and to establish it as a viable HLW vitrification technology. The greater than two year effort conducted with the International Radioecology Laboratory in the Ukraine recently completed. The objectives of this study were: to assess the long-term impacts to the environment from radiation exposure in the Chernobyl Exclusion Zone (ChEZ); and to provide information on remediation guidelines and ecological risk assessment within radioactively contaminated territories around the Chernobyl Nuclear Power Plant

  10. Four-Dimensional Weather Functional Requirements for NextGen Air Traffic Management

    Science.gov (United States)

    2008-01-18

    capability currently provided by the Traffic Management Advisor ( TMA ) is a set of tools designed to help air traffic controllers manage the...Amis NWS CWSU MIC at ZFW thomas.amis@noaa.gov Danny Sims FAA Sys. Ops. Services, TFM Research danny.sims@faa.gov 703-326-3938 Mark Phaneuf

  11. 谈项目施工准备阶段的技术管理%On technical management at construction preparation phase of projects

    Institute of Scientific and Technical Information of China (English)

    杜晋刚

    2016-01-01

    Combining with the work experience,the paper illustrates the technical management measures at the program construction preparation from the familiarity with contracts,map checking,progress planning,special construction scheme compilation,and technical rechecking,so as to improve the economic benefits with the technical measures and realize the cost target.%结合工作经验,从熟悉合同、查看图纸、进度计划、专项施工方案编制、技术复核等方面,阐述了项目施工准备阶段的技术管理措施,旨在通过技术手段提高经济效益,从而实现目标成本。

  12. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball and W. Zeuner

    2011-01-01

    In this report we will review the main achievements of the Technical Stop and the progress of several centrally-managed projects to support CMS operation and maintenance and prepare the way for upgrades. Overview of the extended Technical Stop  The principal objectives of the extended Technical Stop affecting the detector itself were the installation of the TOTEM T1 telescopes on both ends, the readjustment of the alignment link-disk in YE-2, the replacement of the light-guide sleeves for all PMs of both HFs, and some repairs on TOTEM T2 and CASTOR. The most significant tasks were, however, concentrated on the supporting infrastructure. A detailed line-by-line leak search was performed in the C6F14 cooling system of the Tracker, followed by the installation of variable-frequency drives on the pump motors of the SS1 and SS2 tracker cooling plants to reduce pressure transients during start-up. In the electrical system, larger harmonic filters were installed in ...

  13. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball

    Overview From a technical perspective, CMS has been in “beam operation” state since 6th November. The detector is fully closed with all components operational and the magnetic field is normally at the nominal 3.8T. The UXC cavern is normally closed with the radiation veto set. Access to UXC is now only possible during downtimes of LHC. Such accesses must be carefully planned, documented and carried out in agreement with CMS Technical Coordination, Experimental Area Management, LHC programme coordination and the CCC. Material flow in and out of UXC is now strictly controlled. Access to USC remains possible at any time, although, for safety reasons, it is necessary to register with the shift crew in the control room before going down.It is obligatory for all material leaving UXC to pass through the underground buffer zone for RP scanning, database entry and appropriate labeling for traceability. Technical coordination (notably Stephane Bally and Christoph Schaefer), the shift crew and run ...

  14. Total Quality Management (TQM) in Self-Financed Technical Institutions: A Quality Function Deployment (QFD) and Force Field Analysis Approach

    Science.gov (United States)

    Thakkar, Jitesh; Deshmukh, S. G.; Shastree, Anil

    2006-01-01

    Purpose: To explore the potential for adoption of TQM in self-financed technical institutions in the light of new demands and challenges posed by customers/students and society. Design/methodology/approach: The paper presents use of quality function deployment (QFD) which prioritizes technical requirements and correlates them with various…

  15. Total Quality Management (TQM) in Self-Financed Technical Institutions: A Quality Function Deployment (QFD) and Force Field Analysis Approach

    Science.gov (United States)

    Thakkar, Jitesh; Deshmukh, S. G.; Shastree, Anil

    2006-01-01

    Purpose: To explore the potential for adoption of TQM in self-financed technical institutions in the light of new demands and challenges posed by customers/students and society. Design/methodology/approach: The paper presents use of quality function deployment (QFD) which prioritizes technical requirements and correlates them with various…

  16. American Gastroenterological Association Institute Technical Review on the Role of Therapeutic Drug Monitoring in the Management of Inflammatory Bowel Diseases.

    Science.gov (United States)

    Vande Casteele, Niels; Herfarth, Hans; Katz, Jeffry; Falck-Ytter, Yngve; Singh, Siddharth

    2017-09-01

    Therapeutic drug monitoring (TDM), which involves measurement of drug or active metabolite levels and anti-drug antibodies, is a promising strategy that can be used to optimize inflammatory bowel disease therapeutics. It is based on the premise that there is a relationship between drug exposure and outcomes, and that considerable inter-individual variability exists in how patients metabolize the drug (pharmacokinetics) and the magnitude and duration of response to therapy (pharmacodynamics). Therefore, the American Gastroenterological Association has prioritized clinical guidelines on the role of TDM in the management of inflammatory bowel disease. To inform these clinical guidelines, this technical review was developed in accordance with the GRADE (Grading of Recommendations Assessment, Development, and Evaluation) framework for interventional and prognostic studies, and focused on the application of TDM for biologic therapy, specifically anti-tumor necrosis factor-α agents, and for thiopurines. Focused questions address the benefits and risks of a strategy of reactive TDM (in patients with active inflammatory bowel disease) to guide treatment changes compared with empiric treatment changes, and the benefits and risks of a strategy of routine proactive TDM (during routine clinical care in patients with quiescent disease) compared with no routine TDM. Additionally, the review addresses the benefits and risks of routine measurement of thiopurine methyltransferase enzyme activity or genotype before starting thiopurine therapy compared with empiric weight-based dosing and explores the performance of different trough drug concentrations for anti-tumor necrosis factor agents and thiopurines to inform clinical decision making when applying TDM in a reactive setting. Due to a paucity of data, this review does not address the role of TDM for more recently approved biologic agents, such as vedolizumab or ustekinumab. Copyright © 2017 AGA Institute. Published by Elsevier

  17. Objective structured assessment of technical skills evaluation of theoretical compared with hands-on training of shoulder dystocia management: a randomized controlled trial.

    Science.gov (United States)

    Buerkle, Bernd; Pueth, Julia; Hefler, Lukas A; Tempfer-Bentz, Eva-Katrin; Tempfer, Clemens B

    2012-10-01

    To compare the skills of performing a shoulder dystocia management algorithm after hands-on training compared with demonstration. We randomized medical students to a 30-minute hands-on (group 1) and a 30-minute demonstration (group 2) training session teaching a standardized shoulder dystocia management scheme on a pelvic training model. Participants were tested with a 22-item Objective Structured Assessment of Technical Skills scoring system after training and 72 hours thereafter. Objective Structured Assessment of Technical Skills scores were the primary outcome. Performance time, self-assessment, confidence, and global rating scale were the secondary outcomes. Statistics were performed using Mann-Whitney U test, χ test, and multiple linear regression analysis. Two hundred three participants were randomized. Objective Structured Assessment of Technical Skills scores were significantly higher in group 1 (n=103) compared with group 2 (n=100) (17.95±3.14 compared with 15.67±3.18, respectively; Psecondary outcomes global rating scale (GRS; 10.94±2.71 compared with 8.57±2.61, respectively; Ptraining helps to achieve a significant improvement of shoulder dystocia management on a pelvic training model. www.ClinicalTrials.gov, NCT01618565. I.

  18. [Determination of Rh in removal solution of the catalyst from HNBR by FAAS].

    Science.gov (United States)

    Yao, Ming; Zhao, Wei-dong; Wang, Shu-jun; Xu, Rui-qing

    2003-04-01

    The content of Rhodium in extraction solution of the catalyst from HNBR was determined by FAAS. The results showed that this method was simple, rapid, accurate and convenient. Furthermore, this method was used as a means to investigate the optimum process conditions for removing catalyst from HNBR by ligation-extraction technology. When sulfocarbmide was used as a ligation agent and 88% formic acid as an extraction agent, the removal rate of Rh was greater than 98% under the condition of 100 degrees C and two hours of reaction time.

  19. 78 FR 19355 - Announcement of Charter Renewal of the Radio Technical Commission for Aeronautics (RTCA), Inc.

    Science.gov (United States)

    2013-03-29

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Announcement of Charter Renewal of the Radio Technical Commission for Aeronautics (RTCA), Inc. SUMMARY: The FAA is issuing this notice to advise the public of the charter...

  20. Milestones for National Technical

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    The first session of National Technical Committee of Auto Standardization was established onApri128,1988. The first session of National Technical Committee of Auto Standardization (SAC/TC 114)was established in Beijing on April 28,1988,under the approval of the National Bureau of Standards at that time,with the official from China Association of Automobile Manufacturers as its director.It played a very impoorant role,not only in the unified management of auto standards but also in the technical work of the management of auto products.

  1. 医院个人专业技术档案的管理及利用%Discussion of management and utilization of hospital personal professional technical file

    Institute of Scientific and Technical Information of China (English)

    闫琴; 曾秀凤

    2014-01-01

    The hospital personal professional technical file is the records and documents of assessment and evaluation,position and technical title promotion,learning education,scientific research and experience summary of hospital professional technical personnel.It is an important part of hospital archives.Personal professional technical file plays an irreplaceable important role in hospital personnel management work.At the same time,it also plays a unique role in scientific research and other aspects.%医院个人专业技术档案是医院专业技术人员考核考评、职务职称晋升、学习教育、科研、经验总结的记录和凭证,是医院档案的重要组成部分。个人专业技术档案在医院人事管理工作中起着不可替代的重要作用,同时,在科研及其他方面也发挥着特有的作用。

  2. The FAA's postmortem forensic toxicology self-evaluated proficiency test program: the second seven years.

    Science.gov (United States)

    Chaturvedi, Arvind K; Craft, Kristi J; Cardona, Patrick S; Rogers, Paul B; Canfield, Dennis V

    2009-05-01

    During toxicological evaluations of samples from fatally injured pilots involved in civil aviation accidents, a high degree of quality control/quality assurance (QC/QA) is maintained. Under this philosophy, the Federal Aviation Administration (FAA) started a forensic toxicology proficiency-testing (PT) program in July 1991. In continuation of the first seven years of the PT findings reported earlier, PT findings of the next seven years are summarized herein. Twenty-eight survey samples (12 urine, 9 blood, and 7 tissue homogenate) with/without alcohols/volatiles, drugs, and/or putrefactive amine(s) were submitted to an average of 31 laboratories, of which an average of 25 participants returned their results. Analytes in survey samples were correctly identified and quantitated by a large number of participants, but some false positives of concern were reported. It is anticipated that the FAA's PT program will continue to serve the forensic toxicology community through this important part of the QC/QA for laboratory accreditations.

  3. 17 April 2008 - Head of Internal Audit Network meeting visiting the ATLAS experimental area with CERN ATLAS Team Leader P. Fassnacht, ATLAS Technical Coordinator M. Nessi and ATLAS Resources Manager M. Nordberg.

    CERN Multimedia

    Mona Schweizer

    2008-01-01

    17 April 2008 - Head of Internal Audit Network meeting visiting the ATLAS experimental area with CERN ATLAS Team Leader P. Fassnacht, ATLAS Technical Coordinator M. Nessi and ATLAS Resources Manager M. Nordberg.

  4. Report of the Technical Consultation between Malawi, Mozambique and the Tanzania on the Development and Management of the Fisheries of Lake Malawi/Niassa/Nyasa: Mangochi, Republic of Malawi, 17-19 June 2003

    National Research Council Canada - National Science Library

    2005-01-01

    This document is the final report of the Technical Consultation between Malawi, Mozambique and Tanzania on the Development and Management of the Fisheries of Lake Malawi/Niassa/Nyasa held in Mangochi...

  5. 高级技工学校后勤管理工作的改革方向%Reforms in Advanced Technical Schools Logistics Management Work

    Institute of Scientific and Technical Information of China (English)

    王学军

    2015-01-01

    后勤管理工作是学校整体运作中不可或缺的重要方面,更提供了全校师生学习生活的基本保障.随着我国高级技工学校的不断发展,后勤管理工作也面临着不断增长的问题和新的要求.本文从高级技工学校后勤管理重要性出发,进一步梳理实际工作中遇到的种种问题,最后提出后勤管理工作的总体改革方向.%Logistics management is an important aspect of the overall operation of the school indispensable, but also provi-des teachers and students to learn basic life guarantee. With the continuous development of China's advanced technical schoo-ls, logistics management is also facing growing problems and new requirements. In this paper, the importance of logistics management, advanced technical schools starting the actual work to further sort out the problems encountered. Finally, put forward the overall direction of reform of logistics management.

  6. MANAGERS AND BASIC EDUCATION TEACHERS : THE IMPLICATIONS OF ITS ROLE WITH THE EFFECTIVENESS OF TECHNICAL SCHOOL BOARDS

    Directory of Open Access Journals (Sweden)

    Manuel Ortega Muñoz

    2015-06-01

    Full Text Available This letter is part of a broader investigation that deals with the functioning of the School Technical Councils in the elementary schools in the state of Durango, Mexico. In this part, they were raised the following objectives: a Identify what level of implications of the role of principals and teachers in the effective functioning of the School Technical Councils, b Identify the implications of the role of principals and teachers are regarding compliance with the objectives of the School Technical Councils in schools of basic education in the state of Durango and c Identify the implications of the role of principals and teachers regarding the exercise of the powers of the Technical School Councils in schools are Basic education in the state of Durango, Mexico. To achieve the objectives was carried out an exploratory, descriptive, correlational, cross-sectional non-experimental study. Information gathering was conducted by survey method using a questionnaire applied to 1243 principals, group teachers, support teachers and of basic education in the State of Durango, México. Its main results support the conclusion that the gender implications regarding the effective functioning of the School Technical Councils in the elementary schools in the state of Durango have a low level, analyzing its dimensions: achievement of objectives and exercise of powers.

  7. Technical cooperation front line. JICA technology cooperation project in Indonesia and Vietnam (Coal mining technology enhancement project in Indonesia); (Coal Mine Firedamp Gas Management Center in Vietnam)

    Energy Technology Data Exchange (ETDEWEB)

    Inami, K. [Japan Coal Energy Center (Japan). Technical Service Group, Engineering Dept.

    2002-09-01

    In April 2001, two coal mining technical cooperation projects of Japan International Cooperation Agency (JICA) started. The first project is 'Coal Mining Technology Enhancement Project in Indonesia'. The second project is 'Coal Mine Firedamp Gas Management Center in Vietnam'. Both are project-type technical cooperation for the technology transfer centering in advanced Japanese underground coal mine technologies for a five years project period from April 1 2001 to 31 March 2006. Japan Coal Energy Center (JCOAL) have carried out indirect supporting function for the planning and the execution of the project from the preparation phase of the project start-up as a supporting agency based on the business agreement with JICA. This paper reports the projects development. 2 figs., 1 tab.

  8. Standardization management of technical document for die & mould design and manufacture%模具设计制造中技术文件标准化管理

    Institute of Scientific and Technical Information of China (English)

    虞杰伟

    2012-01-01

    针对模具企业的技术文件管理制度进行了系统论述,从实际模具制造管理工作中制定了一套完整有效的文件管理模式,并在此文件管理模式下探讨如何实现模具制造的无纸化加工,对不同管理模式、不同技术层面的模具企业有一定的参考作用.%The technical document management system in die & mould enterprises was systematically discussed. A complete and effective document management mode was proposed based on the practical management work for die & mould manufacture and then how to implement a paperless processing was discussed.

  9. Some challenges and issues in managing, and preserving access to, long-lived collections of digital scientific and technical data

    Directory of Open Access Journals (Sweden)

    W L Anderson

    2006-01-01

    Full Text Available One goal of the Committee on Data for Science and Technology is to solicit information about, promote discussion of, and support action on the many issues related to scientific and technical data preservation, archiving, and access. This brief paper describes four broad categories of issues that help to organize discussion, learning, and action regarding the work needed to support the long-term preservation of, and access to, scientific and technical data. In each category, some specific issues and areas of concern are described.

  10. Emphasizing Research (Further) in Undergraduate Technical Communication Curricula: Involving Undergraduate Students with an Academic Journal's Publication and Management

    Science.gov (United States)

    Ford, Julie Dyke; Newmark, Julianne

    2011-01-01

    This article presents follow-up information to a previous publication regarding ways to increase emphasis on research skills in undergraduate Technical Communication curricula. We detail the ways our undergraduate program highlights research by requiring majors to complete senior thesis projects that culminate in submission to an online…

  11. Managing a Basic Unit Responsible for a Basic Discipline: The Physics Department at the Technical University, Aachen.

    Science.gov (United States)

    Felderhof, B. U.

    1983-01-01

    The administrative structure of the physics department in a major European technical university is described, particularly with regard to the organization of teaching and research functions. The department is subdivided into an institute of theoretical physics and several institutes of experimental physics, with a more important subdivision into…

  12. The role of capsular distention in the arthroscopic management of arthrofibrosis of the knee: A technical consideration.

    Science.gov (United States)

    Millett, P J; Steadman, J R

    2001-09-01

    Arthroscopic treatment of arthrofibrosis of the knee is a technically challenging procedure. Capsular distention with fluid before arthroscopy results in easier and safer insertion of arthroscopic instruments with improved arthroscopic visualization. In addition, it stretches the entire capsule, including the difficult to access posterior capsule. This report describes a simple technique for capsular distention before arthroscopic treatment of arthrofibrosis of the knee.

  13. ADSORPTION BEHAVIOR OF Pb(II) ON POTASSIUM HEXATITANATE WHISKER BY FAAS

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Based on the advantage of high surface area and strong adsorption ability of potassium hexatitanate whisker, a method to determine trace Pb(II) content by combining solid phase extraction with Flame atomic absorption spectrometry (FAAS) was established. The adsorptive behavior of potassium hexatitanate whisker to Pb(II), primary influencing factors of adsorption and elution and effect of coexistence ions were investigated systemically. The optimal analytical conditions were discussed and examined. It was found that the adsorption rate of potassium hexatitanate whisker to Pb(II) was 100% at pH 4.0. Pb(II) could be eluted from potassium tetratitanate whisker with HCl (2mol/L) under boiling water for 30min. The detection limit was 5.75ng/mL, and relative standard deviation was 1.66% (n=9, CPb=2.0μg/mL).

  14. ADSORPTION BEHAVIOR OF Pb(Ⅱ) ON POTASSIUM HEXATITANATE WHISKER BY FAAS

    Institute of Scientific and Technical Information of China (English)

    CHENG Yonghua; XU Wanzhen; YAN Yongsheng; JING Junjie

    2008-01-01

    Based on the advantage of high surface area and strong adsorption ability of potassium hexatitanate whisker, a method to determine trace Pb(Ⅱ) content by combining solid phase extraction with Flame atomic absorption spectrometry (FAAS) was established.The adsorptive behavior of potassium hexatitanate whisker to Pb(Ⅱ), primary influencing factors of adsorption and elation and effect of coexistence ions were investigated systemically.The optimal analytical conditions were discussed and examined.It was found that the adsorption rate of potassium hexatitanate whisker to Pb(Ⅱ) was 100% at pH 4.0.Pb(Ⅱ) could be elated from potassium tetratitanate whisker with HCI (2mol/L) under boiling water for 30min.The detection limit was 5.75ng/mL, and relative standard deviation was 1.66% (n=9, CPb=2.0μg/mL).

  15. FAA Air Traffic Control Operations Concepts. Volume 7. ATCT (Airport Traffic Control Towers) Tower Controllers

    Science.gov (United States)

    1989-04-21

    DEVIATION SI’UATION RESORVE DEVIA11ON SITUATION REU IRED ý1.2.4.3 f i f FOCMULATE ADVSORY/ SAFETY GEERATE CLEARANCE ALERT GWENTET T1.3.1.6 PISSUEIH...l BN AIRCRAFT VEHICLEJ L~ Z S CTP1T1.4.2.2 11 .2.4.1___ RECEIVE NOT IC OF S’ECIAL OBERVE A-IRCRAFT! VEHICLE Cct-7ION~c-/ EMERGIEFNY PERCEIVE. PRESE...1RESPF•WIUNGTO 1 RANSIENT M( Z •NIlC4,11(11 FAILURES T1.7.8 . . . RESPO!&IrC TO AIRPORT EQUI, .T FAILURES ] T1".7.9 RESPOV0G "TO HOST FAILURES DOT/FAA/AP

  16. Assistance to the states with risk based data management. Quarterly technical progress report, January 1, 1995--March 31, 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-06-01

    This report describes activities associated with the risk based data management systems (RBDMS) project. The RBDMS applies to data pertaining to injection well operations. This report describes assistance provided to the states of ALaska, Mississippi, Montana, and Nebraska for the conversion of data from existing data management systems, coding and internal testing of the RBDMS, document preparation, training, technology transfer, and project management.

  17. 银医自助管理平台功能的技术实现%Technical Implementation of Bank-Hospital self-service Management Platform

    Institute of Scientific and Technical Information of China (English)

    袁荣江; 潘晓雷; 薛宁

    2012-01-01

    Described in detail the function of the Bank-Medicalself— management platform, including: self-service terminal device monitoring, statistical reporting, the Quartet Reconciliation, user rights management, and system log management, provider of equipment management, equipment management, system version control. On this basis, on the Bank-Medical self—management platform, system design and implementation, as well as the effectiveness of the final.The author is a senior technical manager, has for many years engaged in banking, hospital HIS system development experience. This article describes the Bank—Medicalself— management platform independent research and development of the card Electronic Co., Ltd., Shenzhen City. Take full account of the versatility of the system and the banking system, rigor, security system design and development process; mainstream techniques, under the premise to meet customer needs, taking into account considering the maintainability of the system.%通过介绍“银医自助管理平台”的功能,技术实现及应用成效,说明银医自助管理平台在银医自助服务平台中发挥的重要作用.详细介绍了银医自助管理平台的功能,在此基础上,阐述了银医自助管理平台的系统设计及其实现,以及最终所取得的成效.在系统的设计开发过程中,充分考虑了系统的通用性和银行系统的严谨性、安全性;采用了主流技术,在满足客户需求的前提下,同时兼顾考虑系统的可维护性.

  18. Learning Management System In Distance Learning And Design Process Of A Synchronous Learning Platform: Case of Karadeniz Technical University

    Directory of Open Access Journals (Sweden)

    Adnan Baki

    2009-03-01

    Full Text Available The fact that web based distance learning concept has recently gained more and more significance has required the establishment of virtual campuses at universities and the provision of synchronous and asynchronous education facilities to be used in these campuses. While applying distance learning methods, the universities should adopt genuine learning management systems that could reflect their own characteristics and meet their own needs which are also adaptable to mid and long-term technological changes. The universities should also have synchronous education facilities integrated to the system.1. MethodologyAs is required by the nature of the research problem itself, this study bears a qualitative feature. “Action research”, which is one of the qualitative research approaches has been used in this study. Documents and observations have been used as data collection instruments. The diaries of the students who participated to the research during the design of the system have been analysed using document analysis technique. The research has been conducted with the participation of 14 M.A. students from Karadeniz Technical University, Fatih Faculty of Education, Department of Computer and Instructional Technologies during 2008-2009 spring term. During the research students‟ individual diaries, have been coded and qualitatively analysed. The results of the qualitative analysis indicate similar and different cases experienced by two different students groups during the study.2. System Design ProcessIt has turned out that specific software with synchronous and asynchronous features should be employed in order to ensure effective use of the present distance learning system. The preparation of synchronous and asynchronous chapters has required different coding and design features therefore two different groups have been formed.The synchronous and asynchronous working groups have made a literature review regarding their own fields of study. The

  19. Design and technical evaluation of an enhanced location-awareness service enabler for spatial disorientation management of elderly with mild cognitive impairment.

    Science.gov (United States)

    Moreno, Pedro A; Hernando, M Elena; Gómez, Enrique J

    2015-01-01

    The progressive ageing of population has turned the mild cognitive impairment (MCI) into a prevalent disease suffered by elderly. Consequently, the spatial disorientation has become a significant problem for older people and their caregivers. The ambient-assisted living applications are offering location-based services for empowering elderly to go outside and encouraging a greater independence. Therefore, this paper describes the design and technical evaluation of a location-awareness service enabler aimed at supporting and managing probable wandering situations of a person with MCI. Through the presence capabilities of the IP multimedia subsystem (IMS) architecture, the service will alert patient's contacts if a hazardous situation is detected depending on his location. Furthermore, information about the older person's security areas has been included in the user profile managed by IMS. In doing so, the service enabler introduced contribute to "context-awareness" paradigm allowing the adaptation and personalization of services depending on user's context and specific conditions or preferences.

  20. Effects of a rational-emotive health education intervention on stress management and irrational beliefs among technical college teachers in Southeast Nigeria.

    Science.gov (United States)

    Ugwoke, Samuel C; Eseadi, Chiedu; Igbokwe, Chima C; Chiaha, Gertrude T U; Nwaubani, Okechukwu O; Orji, Chibueze Tobias; Ugwuanyi, Leonard T; Chukwuma, Ifeoma S; Edikpa, Edith C; Ogakwu, Vera N; Onu, Eucharia A; Agu, Patricia; Nwobi, Ujunwa A; Omeke, Faith; Okeke, Francisca C; Ezema, Rita N; Abugu, Lawretta I

    2017-08-01

    Stress is the product of how an individual reacts and adapts to the specific demands and threats they encounter while carrying out given tasks. The main purpose of this study was to investigate the effects of a rational-emotive health education intervention (REHEI) on stress management, and irrational beliefs in a sample of technical college teachers in Southeast Nigeria. The study design was a pretest-posttest control group. Repeated measures analysis of variance, paired t test and Mann-Whitney U tests were used to analyze the data collected. The REHEI significantly reduced teacher stress in those teaching staff exposed to the treatment intervention, relative to a waitlist control group. Furthermore, the REHEI program significantly decreased irrational beliefs about teaching in those teaching staff exposed to the treatment intervention compared to a waitlist control group. The REHEI program can be used to coach teachers on how to manage and cope with stress and overcome irrational beliefs in teaching.

  1. 49 CFR 23.45 - What are the requirements for submitting overall goal information to the FAA?

    Science.gov (United States)

    2010-10-01

    ... Transportation PARTICIPATION OF DISADVANTAGED BUSINESS ENTERPRISE IN AIRPORT CONCESSIONS Goals, Good Faith...-conscious means, respectively, and the basis for making this projection (see § 23.51(d)(5)) (g) FAA may approve or disapprove the way you calculated your goal, including your race-neutral/race-conscious “split...

  2. 14 CFR 11.21 - What are the most common kinds of rulemaking actions for which FAA follows the Administrative...

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false What are the most common kinds of rulemaking actions for which FAA follows the Administrative Procedure Act? 11.21 Section 11.21 Aeronautics... RULEMAKING PROCEDURES Rulemaking Procedures General § 11.21 What are the most common kinds of...

  3. 14 CFR 193.17 - How must design and production approval holders handle information they receive from the FAA...

    Science.gov (United States)

    2010-01-01

    ... REGULATIONS PROTECTION OF VOLUNTARILY SUBMITTED INFORMATION § 193.17 How must design and production approval... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false How must design and production approval holders handle information they receive from the FAA under this part? 193.17 Section 193.17...

  4. [Determination of eight metal elements in Cichorium glandulosum Boiss et Huet by microwave digestion-FAAS].

    Science.gov (United States)

    Pei, Ling-Peng; Zhou, Xiao-Ying; Cui, Jian; Pang, Zong-Ran; Liu, Hong-Bing; Ge, Liang

    2009-12-01

    The Cichorium glandulosum Boiss et Huet is a traditional Uighur natural herbal medicine, but has not been analyzed and studied in terms of its metal elements. In the experiment, the Cichorium glandulosum Boiss et Huet powder was digested with HNO3 by microwave digestion before determination. The eight metal elements, potassium, nickel, calcium, magnesium, iron, manganese, copper and zinc, in Cichorium glandulosum Boiss et Huet were determined by FAAS. The working conditions, accuracy and precision of the method were studied. The linear correlations of standard curves are good (r = 0.999 1-0.999 9). The recovery (n = 6) is 92.25%-110.5%, and the RSD (n = 6) is 0.7%-3.88%. The results showed that there were comparatively rich metal elements, among which are comparatively high calcium (65.84 mg x g(-1)), iron (24.38 mg x g(-1)), magnesium (278.17 mg x g(-1)) and potassium (18.50 mg x g(-1)), in Cichorium glandulosum Boiss et Huet, and the contents of other elements are nickel of 0.004 38 mg x g(-1), manganese of 0.52 mg x g(-1), copper of 0.016 5 mg x g(-1) and zinc of 0.18 mg x g(-1). This provided useful data for discussing the relationship between the content of the metal elements in Cichorium glandulosum Boiss et Huet and its clinical application in cardiovascular and osteoporosis disease.

  5. Technical assistance to Ohio closure sites; Technologies to address leachate from the on-site disposal facility at Fernald Environmental Management Project, Ohio

    Energy Technology Data Exchange (ETDEWEB)

    Hazen, Terry

    2002-08-26

    On August 6-7, 2002, a Technical Assistance Team (''Team'') from the U.S. Department of Energy (DOE) Subsurface Contaminants Focus Area (SCFA) met with Fernald Environmental Management Project (FEMP) personnel in Ohio to assess approaches to remediating uranium-contaminated leachate from the On-Site Disposal Facility (OSDF). The Team was composed of technical experts from national labs, technology centers, and industry and was assembled in response to a request from the FEMP Aquifer Restoration Project. Dave Brettschneider of Fluor Fernald, Inc., requested that a Team of experts be convened to review technologies for the removal of uranium in both brine ion exchange regeneration solution from the Advanced Wastewater Treatment facility and in the leachate from the OSDF. The Team was asked to identify one or more technologies for bench-scale testing as a cost effective alternative to remove uranium so that the brine regeneration solution from the Advanced Waste Water Treatment facility and the leachate from the OSDF can be discharged without further treatment. The Team was also requested to prepare a recommended development and demonstration plan for the alternative technologies. Finally, the Team was asked to make recommendations on the optimal technical solution for field implementation. The Site's expected outcomes for this effort are schedule acceleration, cost reduction, and better long-term stewardship implementation. To facilitate consideration of the most appropriate technologies, the Team was divided into two groups to consider the brine and the leachate separately, since they represent different sources with different constraints on solutions, e.g., short-term versus very long-term and concentrated versus dilute contaminant matrices. This report focuses on the technologies that are most appropriate for the leachate from the OSDF. Upon arriving at FEMP, project personnel asked the Team to concentrate its efforts on evaluating

  6. DESIGN OF COMPREHENSIVE TECHNICAL INFORMATION MANAGEMENT SYSTEM BASED ON JSF,SPRING AND HIBERNATE%基于JSF、Spring和Hibernate的技术资料综合管理系统设计

    Institute of Scientific and Technical Information of China (English)

    董海燕; 王卫东

    2012-01-01

    技术资料在设备系统中具有重要的位置,为管理技术资料,并能从中快速地找到所需的各种信息,通过对技术资料管理的分析与研究,运用JSF、Spring和Hibernate 集成框架技术,以Oracle 作为后台数据库,设计并实现了基于B/S多层架构模式的技术资料管理系统.该系统实现了技术资料数字化管理和全文搜索,大大提高了设备维护工作的效率.%Technical data plays an important role in equipment system. In order to manage the technical data and to find out any useful information rapidly, We designed and implemented an integrated management system for technical data which is based on B/S N-tier model by analysing and studying technical data management, applying the integrated framework technology of JSF, Spring and Hibernate, and taking Oracle as the background database. This system has achieved technical data management digitization and full text research, and greatly improved the efficiency of equipment maintenance.

  7. Technical and management support for the development of small wind systems. Annual report, October 1, 1977-September 30, 1978

    Energy Technology Data Exchange (ETDEWEB)

    None

    1979-02-01

    The FY 1978 Annual Report of the Rocky Flats Wind Systems Program describes the objectives, approach, and achievements of the program and each of its tasks areas during the period October 1, 1977-September 30, 1978. During this period, additional testing of ten small wind energy conversion systems (SWECS) was conducted and the Test Center was expanded to accommodate up to 30 SWECS. Work on nine design and analysis projects for advanced prototypes in three size ranges progressed through a series of design reviews, with prototype delivery scheduled to begin in mid-1979. Supporting activities included a Systems Engineering project which analyzed the cost of SWECS components and fabrication, a task effort in technical support to standards development, and the dissemination of information.

  8. Guidance of technical management of dialysis water and dialysis fluid for the Japan Association for Clinical Engineering Technologists.

    Science.gov (United States)

    Kawasaki, Tadayuki; Uchino, Junji; Shinoda, Toshio; Kawanishi, Hideki

    2009-01-01

    There has been remarkable medical and technological progress in Japanese dialysis therapy where more than 270 thousand patients had been treated with dialysis by the end of 2007. Clinical engineering technologists have played an important role not only in the safety treatment but also in the technological development of dialysis therapy. It is very important to supply pure dialysis fluid for both the efficacy and the safety of hemodialysis in which high permeable dialysis membranes are used. The Japanese Society for Dialysis Therapy recently issued the standard for bacterial management of fluids for hemodialysis and related therapies according to the International Organization for Standardization (ISO)/DIS 23500. In order to achieve the standard, the management of dialysis water treatment is important as well as the role of clinical engineering technologists in daily dialysis practice. Purification is defined as no contamination by chemical substances and/or microorganisms and its components. The purification consists of the design and the system structure of the water treatment equipment and dialysis fluid-supplying equipment, and the operation and management of the equipment. The guideline aims to show the minimum standard and the management method of the water treatment system and dialysis fluid-supplying equipment in order to perform hemodialysis safely. They should outline safer dialysis by the management of purification of dialysis fluid.

  9. Preparedness of Operation Teams' Non-technical Skills in a Main Control Room of Nuclear Power Plants to Manage Emergency Situations

    Energy Technology Data Exchange (ETDEWEB)

    Yim, Ho Bin; Kim, Ar Ryum; Seong, Poong Hyun [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of)

    2012-05-15

    Human reliability is one of the important determinants for the system safety. Nuclear Energy Agency reported that approximately half of events reported by foreign nuclear industry were related with inappropriate human actions. The human error problems can be viewed in two ways: the person approach and the system approach. Other terms to represent each approach are active failures and latent conditions. Active failures are unsafe acts committed by people who are in direct contact with systems whereas latent conditions are the inevitable 'resident pathogens' within the system. To identify what kinds of non-technical skills were needed to cope with emergency conditions, a method to evaluate preparedness of task management in emergency conditions based on monitoring patterns was presented. Five characteristics were suggested to evaluate emergency task management and communication: latent mistake resistibility, latent violation resistibility, thoroughness, communication, and assertiveness. Case study was done by analyzing emergency training of 9 different real operation teams in the reference plant. The result showed that the 9 teams had their own emergency task management skills which resulted in good and bad performances

  10. 心理教育在技工学校班级管理中的应用%Application of Psychological Education in Class Management of Technical Schools

    Institute of Scientific and Technical Information of China (English)

    叶风华

    2014-01-01

    在分析技工学校学生心理状况及心理需求的基础上,阐述将心理教育通过心理测评工具、心理危机干预和开展心理主题班会等形式应用在班级管理中。实践证明,心理教育对班级良好氛围的创建起着重要的推动作用。%Based on the analysis of the psychological status and psychological demand of students in technical school, this paper explores the application of psychological education for class management, by the psychological assessment tools, psychological crisis intervention and psychological theme class meeting, etc. It has been proved that the psychological education plays an important role in promoting a good atmosphere in class.

  11. 专业技术干部综合测评管理系统的实现%The implementation of professional technical cadres assessment management system

    Institute of Scientific and Technical Information of China (English)

    孙盛智

    2014-01-01

    本设计基于B/S模式,运用ASP.NET技术,采用功能强大的Microsoft Visual Studio 2012作为开发工具、Sql Server作为数据库而开发出来的综合测评管理系统。对提高学院技术干部考核与评估的公平、公正、公开具有重大意义。%The design is based on B/S mode,using ASP.NET technology, the comprehensive assessment management system of powerful Microsoft Visual Studio 2012 as a development tool,Sql Server as database and developed. The public has great significance on improving college technical cadre evaluation and assessment of the fairness,justice.

  12. Screening, diagnosis and management of human cysticercosis and Taenia solium taeniasis: technical recommendations by the COHEMI project study group.

    Science.gov (United States)

    Zammarchi, Lorenzo; Bonati, Maurizio; Strohmeyer, Marianne; Albonico, Marco; Requena-Méndez, Ana; Bisoffi, Zeno; Nicoletti, Alessandra; García, Hector H; Bartoloni, Alessandro

    2017-07-01

    Neurocysticercosis, the central nervous system's localised form of cysticercosis, is considered to be the leading cause of epilepsy in the developing world. In Europe, the disease is mainly imported and affects both immigrants and travellers. However, autochthonous cases of cysticercosis in low-endemic countries could also originate from Taenia solium carriers (migrants or travellers) who acquired taeniasis overseas. Management of cysticercosis is a challenge for European healthcare providers as they are often hardly aware of this infection and have little familiarity in managing this disease. This study provides a summary of recommendations concerning screening, diagnosis and management of cysticercosis and T. solium taeniasis in Europe drawn up by nine experts in migrant health and imported diseases with experience in cysticercosis and T. solium taeniasis. © 2017 John Wiley & Sons Ltd.

  13. The management of technical after-effects of mine closings; La maitrise des sequelles techniques a long terme des exploitations minieres

    Energy Technology Data Exchange (ETDEWEB)

    Petit, D. [Conseil General des Mines, 75 - Paris (France); Pierret, Ch.

    2000-03-01

    The closure of scores of iron and coal mines in France since 1980, has led french political and administrative bodies to thoroughly examine its technical and legal consequences, such as those arising from mine water drainage, disturbances in hydrological systems, mine subsidence, etc. Dwellings damages which happened recently in several Lorraine cities have shown the urgency to solve these problems by means of a law determining the respective responsibilities of mine owners and/or state and local administrations. In this context, a report has been prepared by Mr Petit, from the 'Conseil General des Mines' (a body under the jurisdiction of the Ministry of Industry), to suggest remedies for abandoned mine sites and provisions to be taken in view of other future mine decommissioning. This report has been studied by the french authorities, and the resulting law, which takes into account some recommendations proposed in this report has been adopted by both assemblies and are now in force. Mr Petit report comprises all technical, environmental and legal aspects of mine operations and closures, i.e.: organisations concerned by mining past or present operations (mining companies, land owners, state and local administrations; impact on water systems (surface and underground waters, mine drainage), during and after mining operations, management of related risks and remedies thereof, illustrated by various situations in French iron or e and coal mines ; damages resulting from subsidence in case of old abandoned underground mines, and associated compensations for dwellers; surveillance monitoring to check that objectives and performance criteria are maintained during an adequate period of time after mine decommissioning; urbanization and management of risks in mining areas; other studies which have to be undertaken to complete knowledge of the present situation; appendices: communication of Christian Pierret. (authors)

  14. Determination of zinc in edible oils by flow injection FAAS after extraction induced by emulsion breaking procedure.

    Science.gov (United States)

    Bakircioglu, Dilek; Topraksever, Nukte; Kurtulus, Yasemin Bakircioglu

    2014-05-15

    A new procedure using extraction induced by emulsion breaking (EIEB) procedure has been developed for extraction/preconcentration of zinc in various edible oils (canola oil, corn oil, hazelnut oil, olive oil, and sunflower oil) prior to its determination by the single line flow injection (FI) flame atomic absorption spectrometry (FAAS). Several parameters affecting the extraction efficiency of the procedure were investigated including the type and concentrations of surfactant, the concentration of HNO3, and the other operational conditions (emulsion breaking time and temperature). The limits of detection of 1.1 and 1.0 μg L(-1) were observed for zinc when aqueous standard and oil-based standards were added to the emulsions for calibration, respectively. The proposed procedure of combining EIEB and single line FI-FAAS can be regarded as a new procedure for the determination of zinc in edible oil samples.

  15. The structure and functions of an automated project management system for the centers of scientific and technical creativity of students

    OpenAIRE

    2013-01-01

    This article discusses the possibility of automating of the student's projecting through the use of automated project management system. There are described the purpose, structure and formalism of automated workplace of student-designer (AWSD), and shown its structural-functional diagram.

  16. Identifying and managing technical faults in the anesthesia machine: lessons learned from the Israeli Board of Anesthesiologists.

    Science.gov (United States)

    Ben-Menachem, Erez; Ezri, Tiberiu; Ziv, Amitai; Sidi, Avner; Berkenstadt, Haim

    2011-04-01

    The potential for catastrophe resulting from anesthetic equipment failure and the failure of training programs to adequately prepare residents to detect and manage equipment failure prompted the Israel Board of Anesthesiologists to include simulation-based testing in the Objective Structured Clinical Evaluation component of the Israeli Board Examination in Anesthesiology. We used simulation-based scenarios to measure the performance of residents while (a) checking the anesthesia machine before the first morning case, (b) checking the anesthesia machine between cases, (c) managing an oxygen pipeline failure, and (d) managing an expiratory valve failure. During board examination, 3 of 28 examinees failed to correctly check at least 70% of the items on the anesthesia machine checkout list before the first morning case and 3 of 30 failed to correctly check 70% of the items between cases. Although all examinees recognized inadequate oxygen cylinder pressure and a malfunctioning valve, 1 of 31 examinees failed to open the O(2) cylinder, 6 of 31 did not disconnect the anesthesia machine from the central oxygen supply, 14 of 31 could not explain how to minimize the use of oxygen, 2 of 30 failed to find the faulty valve, and 15 of 30 could not give the correct differential diagnosis. During simulation-based board examination most senior anesthesia residents became aware of equipment failures but many failed to correctly diagnosis and manage the failure.

  17. Enhancing an Integrative Course in Industrial Engineering and Management via Realistic Socio-technical Problems and Serious Game Development

    NARCIS (Netherlands)

    Szirbik, Nicolae; Pelletier, Christine; Velthuizen, Vincent; Umeda, Shigeki

    2015-01-01

    This paper discusses specific educational issues encountered during the Systems Engineering Design course at the Industrial Engineering and Management master program at the University of Groningen. It explains first the concept of an integrative course, an innovation that was applied first in this m

  18. ISS Solar Array Alpha Rotary Joint (SARJ) Bearing Failure and Recovery: Technical and Project Management Lessons Learned

    Science.gov (United States)

    DellaCorte, Christopher; Krantz, Timothy L.; Dube, Michael J.

    2011-01-01

    The photovoltaic solar panels on the International Space Station (ISS) track the Sun through continuous rotating motion enabled by large bearings on the main truss called solar array alpha rotary joints (SARJs). In late 2007, shortly after installation, the starboard SARJ had become hard to turn and had to be shut down after exceeding drive current safety limits. The port SARJ, of the same design, had been working well for over 2 years. An exhaustive failure investigation ensued that included multiple extravehicular activities to collect information and samples for engineering forensics, detailed structural and thermal analyses, and a careful review of the build records. The ultimate root cause was determined to be kinematic design vulnerability coupled with inadequate lubrication, and manufacturing flaws; this was corroborated through ground tests, metallurgical studies, and modeling. A highly successful recovery plan was developed and implemented that included replacing worn and damaged components in orbit and applying space-compatible grease to improve lubrication. Beyond the technical aspects, however, lie several key programmatic lessons learned. These lessons, such as running ground tests to intentional failure to experimentally verify failure modes, are reviewed and discussed so they can be applied to future projects to avoid such problems.

  19. Biomimetic FAA-certifiable, artificial muscle structures for commercial aircraft wings

    Science.gov (United States)

    Barrett, Ronald M.; Barrett, Cassandra M.

    2014-07-01

    This paper is centered on a new form of adaptive material which functions much in the same way as skeletal muscle tissue, is structurally modeled on plant actuator cells and capable of rapidly expanding or shrinking by as much as an order of magnitude in prescribed directions. Rapid changes of plant cell shape and sizes are often initiated via ion-transport driven fluid migration and resulting turgor pressure variation. Certain plant cellular structures like those in Mimosa pudica (sensitive plant), Albizia julibrissin (Mimosa tree), or Dionaea muscipula (Venus Flytrap) all exhibit actuation physiology which employs such turgor pressure manipulation. The paper begins with dynamic micrographs of a sectioned basal articulation joint from A. julibrissin. These figures show large cellular dimensional changes as the structure undergoes foliage articulation. By mimicking such structures in aircraft flight control mechanisms, extremely lightweight pneumatic control surface actuators can be designed. This paper shows several fundamental layouts of such surfaces with actuator elements made exclusively from FAA-certifiable materials, summarizes their structural mechanics and shows actuator power and energy densities that are higher than nearly all classes of conventional adaptive materials available today. A sample flap structure is shown to possess the ability to change its shape and structural stiffness as its cell pressures are manipulated, which in turn changes the surface lift-curve slope when exposed to airflows. Because the structural stiffness can be altered, it is also shown that the commanded section lift-curve slope can be similarly controlled between 1.2 and 6.2 rad-1. Several aircraft weight reduction principles are also shown to come into play as the need to concentrate loads to pass through point actuators is eliminated. The paper concludes with a summary of interrelated performance and airframe-level improvements including enhanced gust rejection, load

  20. 77 FR 73511 - Clarification of Wildlife Hazard Management Requirements for Non-Certificated Federally Obligated...

    Science.gov (United States)

    2012-12-10

    ... Federal Aviation Administration Clarification of Wildlife Hazard Management Requirements for Non... requirements to perform wildlife hazard assessments as specified in Federal Aviation Administration Advisory...: Federal Aviation Administration (FAA), Department of Transportation (DOT). ACTION: Notice of...

  1. Use of a proactive herd management system in a dairy farm of northern italy: technical and economic results

    Directory of Open Access Journals (Sweden)

    Stefania Leonardi

    2013-09-01

    Full Text Available Reproductive and economic data were recorded before and one year after the installation of Herd Navigator™ in a dairy farm with AMS (Automatic Milking System located in a mountain area of Northern Italy. Number of days open reduced from 166 to 103 days, number of days between the first and second insemination decreased from 45 to 28 days, and days for identifying an abortion were 80 % less, from 31 to 6 days. The preliminary results highlight the usefulness of the proactive herd management system installed for the reproduction management. A basic economic model is proposed to evaluate the potential economic benefits coming from the introduction of this technology. The model considers the benefits deriving from the reduction of reproduction problems and, consequently, of days open. Considering the effects related to the above mentioned aspects in a case study involving 60 dairy cows, a return on investment over 5 years has been calculated.

  2. Technical Support Essentials Advice to Succeed in Technical Support

    CERN Document Server

    Sanchez, Andrew

    2010-01-01

    Technical Support Essentials is a book about the many facets of technical support. It attempts to provide a wide array of topics to serve as points of improvement, discussion, or simply topics that you might want to learn. The topics range from good work habits to the way technical supportgroups establish their own style of work. This book applies theories, models, and concepts synthesized from existing research in other fields-such as management, economics, leadership, and psychology-and connects them to technical support. The goal is to build on the work of others and allow their success to

  3. Mobilization and Defense Management Technical Report Series. Effective Integration of Faculty Requirements into Army System Acquisition Programs.

    Science.gov (United States)

    1983-05-01

    authors and does not necessarily reflect the official opinion of the Industrial College of the Acmd ftrces, The National Defense University, or the...good management requirements by the Army or in response to directives from OSD) appear to be generally sufficient to guide the general execution of...significant f. astasiw . gmAt efforts are necessary to minimise these 9j. go NK has no responsibility for execution of facilities construction on ;I in

  4. 2001 ''You Have the Power'' campaign [Federal Energy Management Program]. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-01-01

    The Tasks of 2001 ''You Have the Power'' campaign by the Federal Energy Management Program (FEMP) are: Task 1--Interagency Planning Meetings; Task 2--Ear Day Event; Task 3--Earth Day and Energy Awareness Month Activities; Task 4--Regional Target; Task 5--Outreach Tools and Campaign Products; Task 6--Private Sector Participation; Task 7--''You Have the Power'' on the FEMP Web Site; and Task 8--Effective Communications.

  5. Management of iatrogenic ureteric injury with retrograde ureteric stenting: an analysis of factors affecting technical success and long-term outcome.

    Science.gov (United States)

    Chung, Daniel; Briggs, James; Turney, Benjamin W; Tapping, Charles Ross

    2017-02-01

    Background Iatrogenic ureteral injuries arise as serious complication following obstetrics, gynecological, general, and urological surgery with incidence in the range of 0.5-10%. Retrograde placement of double-J ureteric stent is a possible treatment option if the injury is not recognized at the time of surgery. Purpose To assess technical success and long-term outcome associated with retrograde ureteric stent insertion for iatrogenic ureteric injury. Material and Methods Between 1999 and 2011, 26 patients with initially unrecognized iatrogenic ureteric injury underwent initial management with retrograde ureteric stenting. Full case-notes were available for review in 25 patients. Results The mean interval from injury to attempted stenting was 19.4 days. Successful retrograde ureteric stenting was achieved in 21/25 patients (81%). Retrograde stenting failed in four patients, and nephrostomy followed by alternative procedures were performed instead. At a median follow-up interval of 9.7 months, normal anatomy was demonstrated on 12/21 patients (57%) and a stricture was observed in 6/21 patients (28%) with three requiring surgical intervention. Conclusion Retrograde stenting is a safe and efficient initial management in patients with iatrogenic ureteric injuries.

  6. A farm based on LAVC for DELPHI production: Performance and technical solutions for an efficient and reliable use and management

    Energy Technology Data Exchange (ETDEWEB)

    Checchia, P.; Gasparini, U.; Mazzucato, M.; Pinori, C.; Rampazzo, R.; Zumerle, G. (INFN, Padua (Italy)); Cabras, G. (INFN, Udine (Italy)); Nonni, M.; Stanescu, C. (INFN-Sanita Rome (Italy))

    1990-08-01

    Examining lousely coupled parallel solutions as computing resource we found Local Area VAXcluster suitable for building a production Farm. We transformed, tuning LAVc parameters, a general purpose computing environment in a specialized one, optimized for the production needs. To face the higher complexity introduced by the subdivision of the production between several computers, we developed a central software structure that surveys the functioning of the farm, informs and interfaces the users, automatically closes productions, saves bookeeping information and reports errors. For this we needed an efficient process-to-process communication mechanism, that we found to be an innovative use of some Lock Management system features.

  7. Technical Report: Investigation of Carbon Cycle Processes within a Managed Landscape: An Ecosystem Manipulation and Isotope Tracer Approach

    Energy Technology Data Exchange (ETDEWEB)

    Griffis, Timothy J; Baker, John M; Billmark, Kaycie

    2009-06-01

    The goal of this research is to provide a better scientific understanding of carbon cycle processes within an agricultural landscape characteristic of the Upper Midwest. This project recognizes the need to study processes at multiple spatial and temporal scales to reduce uncertainty in ecosystem and landscape-scale carbon budgets to provide a sound basis for shaping future policy related to carbon management. Specifically, this project has attempted to answer the following questions: 1. Would the use of cover crops result in a shift from carbon neutral to significant carbon gain in corn-soybean rotation ecosystems of the Upper Midwest? 2. Can stable carbon isotope analyses be used to partition ecosystem respiration into its autotrophic and heterotrophic components? 3. Can this partitioning be used to better understand the fate of crop residues to project changes in the soil carbon reservoir? 4. Are agricultural ecosystems of the Upper Midwest carbon neutral, sinks, or sources? Can the proposed measurement and modeling framework help address landscape-scale carbon budget uncertainties and help guide future carbon management policy?

  8. The evolution of the Italian EPR system for the management of household Waste Electrical and Electronic Equipment (WEEE). Technical and economic performance in the spotlight.

    Science.gov (United States)

    Favot, Marinella; Veit, Raphael; Massarutto, Antonio

    2016-10-01

    In this paper we analyse the Italian collective system for the management of household Waste Electrical and Electronic Equipment (WEEE), and its evolution over time, following the European Directives on WEEE, which include the Extended Producer Responsibility (EPR). The analysis focuses on the technical and economic performance of WEEE compliance organisations (consortia), as they are the key players in the Italian EPR regime. Economic results have not usually been provided in previous studies, due to the lack of available data. This study overcomes this problem by accessing the financial statements for the years 2009-2014 of all consortia. The main conclusions of the study are: The Italian EPR system barely exceeded the technical target of the first WEEE Directive (4kg per capita). Improvements are necessary to achieve the target set for 2019 by the Recast Directive. The economic performance of the Italian EPR regime improved significantly over time. The fees charged per tonne of WEEE collected decreased by almost 43% from 652 Euro per tonne in 2009 to 374 Euro per tonne in 2014, while the fees per tonne put on the market (POM) were 134 Euro in 2009 and 104 Euro in 2014. The results prove the theory which states that, competing consortia use the learning effects to reduce the contribution fees for producers rather than to increase the quantity collected. Municipalities remain the most important actor in WEEE collection operations. Consortia compensate municipalities with a reimbursement that ranges between 28 and 38 Euros per tonne collected. These repayments cover only partially their costs. Additional studies should investigate their role.

  9. Water Operations Technical Support Program. Water Quality Management for Reservoirs and Tailwaters. Report 1. In-Reservoir Water Quality Management Techniques

    Science.gov (United States)

    1989-01-01

    Durden 1984). The impact of the two weevils on waterhyacinth in Louisiana serves as an example of insect effectiveness ( Perfetti 1983, Goyer and...commercial formulation has been developed by Abbott Laboratories (Freeman et al. 1981; Perfetti 1983). The effectiveness of the fungus in Louisiana... Perfetti , P. B. 1983. "Use of Insects and Pathogens for Management of Water- hyacinth in Louisiana," Aquatic Plant Control Research Program Information

  10. Waste management technologies for the next millenium. Technical conference; Mit MBA-Technik ins naechste Jahrtausend. Fachtagung

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    Waste management on a federal and Laender level requires reorientation and new decisions in ever shorter intervals. In view of the fact that projecting phases are long and investment costs amount to tens of millions, communal decision-makers must constantly modify their current projects in order to optimise them. The papers in this conference report present theoretical information as well as practical experience in waste treatment plant operation. [German] Die abfallwirtschaftlichen Entwicklungen auf Bundes- und Landesebene erfordern in immer kuerzer werdenden Abstaenden neue Ueberlegungen und Weichenstellungen. Angesichts langer Planungszeitraeume und hoher Investitionskosten im zweistelligen Millionenbereich sind die Entscheidungstraeger auf kommunaler Ebene immer wieder gefordert auf Grundlage aktueller Erkenntnisse bisherige Planungen zu ueberdenken sowie anstehende Projekte zu modifizieren und zu optimieren. Die Vortraege in diesem Tagungsband weisen nicht nur theoretische Ansaetze auf, sondern beinhalten auch praktische Erfahrungen aus verschiedenen Abfallbehandlungsanlagen. (orig./SR)

  11. Technical Competencies for the Safe Interim Storage and Management of 233U at U.S. Department of Energy Facilities

    Energy Technology Data Exchange (ETDEWEB)

    Campbell, D.O.; Krichinsky, A.M.; Laughlin, S.S.; Van Essen, D.C.; Yong, L.K.

    1999-02-17

    Uranium-233 (with concomitant {sup 232}U) is a man-made fissile isotope of uranium with unique nuclear characteristics which require high-integrity alpha containment biological shielding, and remote handling. The special handling considerations and the fact that much of the {sup 233}U processing and large-scale handling was performed over a decade ago underscore the importance of identifying the people within the DOE complex who are currently working with or have worked with {sup 233}U. The availability of these key personnel is important in ensuring safe interim storage, management and ultimate disposition of {sup 233}U at DOE facilities. Significant programs are ongoing at several DOE sites with actinides. The properties of these actinide materials require many of the same types of facilities and handling expertise as does {sup 233}U.

  12. Quantifying And Predicting Wood Quality Of Loblolly And Slash Pine Under Intensive Forest Management Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Richard F. Daniels; Alexander Clark III

    2006-05-04

    The forest industry will increasingly rely on fast-growing intensively managed southern pine plantations to furnish wood and fiber. Intensive silvicultural practices, including competition control, stand density control, fertilization, and genetic improvement are yielding tremendous gains in the quantity of wood production from commercial forest land. How these technologies affect wood properties was heretofore unknown, although there is concern about the suitability of fast-grown wood for traditional forest products. A four year study was undertaken to examine the effects of these intensive practices on the properties of loblolly and slash pine wood by applying a common sampling method over 10 existing field experiments. Early weed control gets young pines off to a rapid start, often with dramatically increased growth rates. This response is all in juvenile wood however, which is low in density and strength. Similar results are found with early Nitrogen fertilization at the time of planting. These treatments increase the proportion of juvenile wood in the tree. Later, mid-rotation fertilization with Nitrogen and Phosphorus can have long term (4-8 year) growth gains. Slight reductions in wood density are short-lived (1-2 years) and occur while the tree is producing dense, stiff mature wood. Impacts of mid-rotation fertilization on wood properties for manufacturing are estimated to be minimal. Genetic differences are evident in wood density and other properties. Single family plantings showed somewhat more uniform properties than bulk improved or unimproved seedlots. Selection of genetic sources with optimal wood properties may counter some of the negative impacts of intensive weed control and fertilization. This work will allow forest managers to better predict the effects of their practices on the quality of their final product.

  13. 44 CFR 300.2 - Technical assistance.

    Science.gov (United States)

    2010-10-01

    ... 44 Emergency Management and Assistance 1 2010-10-01 2010-10-01 false Technical assistance. 300.2... HOMELAND SECURITY PREPAREDNESS DISASTER PREPAREDNESS ASSISTANCE § 300.2 Technical assistance. Requests for technical assistance under section 201(b) of the Act shall be made by the Governor or his/her designated...

  14. 10 CFR 905.40 - Technical assistance.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Technical assistance. 905.40 Section 905.40 Energy DEPARTMENT OF ENERGY ENERGY PLANNING AND MANAGEMENT PROGRAM Energy Services § 905.40 Technical assistance. Western shall establish a program that provides technical assistance to customers to conduct integrated...

  15. 12 CFR 1805.303 - Technical assistance.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 7 2010-01-01 2010-01-01 false Technical assistance. 1805.303 Section 1805.303... assistance. (a) The Fund may provide technical assistance to build the capacity of a CDFI or an entity that proposes to become a CDFI. Such technical assistance may include training for management and other...

  16. 5 CFR 340.203 - Technical assistance.

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Technical assistance. 340.203 Section 340...-Time Employment § 340.203 Technical assistance. (a) The Office of Personnel Management shall provide, within available resources, consultation and technical advice and assistance to agencies to aid them in...

  17. 24 CFR 901.235 - Technical assistance.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Technical assistance. 901.235... DEVELOPMENT PUBLIC HOUSING MANAGEMENT ASSESSMENT PROGRAM § 901.235 Technical assistance. (a) The Department may provide technical assistance to a PHA that is in substantial default. (b) The Department may...

  18. 24 CFR 964.220 - Technical assistance.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Technical assistance. 964.220....220 Technical assistance. (a) Financial assistance. HUD will provide financial assistance, to the extent available, to resident councils or resident management corporations for technical assistance and...

  19. A Technical Evaluation of Wireless Connectivity from Patient Monitors to an Anesthesia Information Management System During Intensive Care Unit Surgery.

    Science.gov (United States)

    Simpao, Allan F; Galvez, Jorge A; England, W Randall; Wartman, Elicia C; Scott, James H; Hamid, Michael M; Rehman, Mohamed A; Epstein, Richard H

    2016-02-01

    Surgical procedures performed at the bedside in the neonatal intensive care unit (NICU) at The Children's Hospital of Philadelphia were documented using paper anesthesia records in contrast to the operating rooms, where an anesthesia information management system (AIMS) was used for all cases. This was largely because of logistical problems related to connecting cables between the bedside monitors and our portable AIMS workstations. We implemented an AIMS for documentation in the NICU using wireless adapters to transmit data from bedside monitoring equipment to a portable AIMS workstation. Testing of the wireless AIMS during simulation in the presence of an electrosurgical generator showed no evidence of interference with data transmission. Thirty NICU surgical procedures were documented via the wireless AIMS. Two wireless cases exhibited brief periods of data loss; one case had an extended data gap because of adapter power failure. In comparison, in a control group of 30 surgical cases in which wired connections were used, there were no data gaps. The wireless AIMS provided a simple, unobtrusive, portable alternative to paper records for documenting anesthesia records during NICU bedside procedures.

  20. Imagining Technicities

    DEFF Research Database (Denmark)

    Liboriussen, Bjarke; Plesner, Ursula

    2011-01-01

    The actors of the building industry have access to a range of Information and Communication Technologies (ICTs), and are constantly presented with new software and new communications platforms. Through case studies, and inspired by sociotechnical approaches to the study of emerging technologies......, this article focuses on innovative uses of virtual worlds in architecture. We interviewed architects, industrial designers and other practitioners. Conceptually supported by an understanding of technicity found in Cultural Studies, the interviews were then coded with a focus on interviewees’ references...... to the elements of taste and skill. In the final analysis those references were synthesized as five imagined technicities: the architect, the engineer, the client, the Chinese, and the Virtual World native. Because technicities are often assumed and rarely discussed as actants who influence practice, their role...

  1. Imagining Technicities

    DEFF Research Database (Denmark)

    Liboriussen, Bjarke; Plesner, Ursula

    2011-01-01

    , this article focuses on innovative uses of virtual worlds in architecture. We interviewed architects, industrial designers and other practitioners. Conceptually supported by an understanding of technicity found in Cultural Studies, the interviews were then coded with a focus on interviewees’ references......The actors of the building industry have access to a range of Information and Communication Technologies (ICTs), and are constantly presented with new software and new communications platforms. Through case studies, and inspired by sociotechnical approaches to the study of emerging technologies...... to the elements of taste and skill. In the final analysis those references were synthesized as five imagined technicities: the architect, the engineer, the client, the Chinese, and the Virtual World native. Because technicities are often assumed and rarely discussed as actants who influence practice, their role...

  2. Technical review of managed underground storage of water study of the upper Catherine Creek watershed, Union County, northeastern Oregon

    Science.gov (United States)

    Snyder, Daniel T.

    2014-01-01

    Because of water diversions during summer, flow in Catherine Creek, a tributary to the Grande Ronde River in northeastern Oregon, is insufficient to sustain several aquatic species for which the stream is listed as critical habitat. A feasibility study for managed underground storage (MUS) in the upper Catherine Creek watershed in Union County, Oregon, was undertaken by Anderson Perry and Associates, Inc., to address the issue of low flows in summer. The results of the study were released as a report titled “Upper Catherine Creek Storage Feasibility Study for Grande Ronde Model Watershed,” which evaluated the possibility of diverting Catherine Creek streamflow during winter (when stream discharge is high), storing the water by infiltration or injection into an aquifer adjacent to the stream, and discharging the water back to the stream in summer to augment low flows. The method of MUS would be accomplished using either (1) aquifer storage and recovery (ASR) that allows for the injection of water that meets drinking-water-quality standards into an aquifer for later recovery and use, or (2) artificial recharge (AR) that involves the intentional addition of water diverted from another source to a groundwater reservoir. Concerns by resource managers that the actions taken to improve water availability for upper Catherine Creek be effective, cost-efficient, long-term, and based on sound analysis led the National Fish and Wildlife Foundation to request that the U.S. Geological Survey conduct an independent review and evaluation of the feasibility study. This report contains the results of that review. The primary objectives of the Anderson Perry and Associates study reviewed here included (1) identifying potentially fatal flaws with the concept of using AR and (or) ASR to augment the streamflow of Catherine Creek, (2) identifying potentially favorable locations for augmenting streamflow, (3) developing and evaluating alternatives for implementing AR and (or) ASR, and

  3. THE TECHNICAL STRATEGY FOR CRYPTOLESTES FERRUGINEUS (STEPHENS) INTEGRATED MANAGEMENT%锈赤扁谷盗的综合治理技术对策

    Institute of Scientific and Technical Information of China (English)

    苏青峰; 王殿轩; 郑超杰; 周晓军

    2013-01-01

    锈赤扃谷盗[Cryptolestes errugineus (Stephens)]在当前粮食仓储中普遍发生,且难以杀除,采取适当的种群控制技术和应对策略进行综合治理更有利于绿色生态储粮.从锈赤扁谷盗的发生习性与治理难度出发,论述了其综合治理应对策略,说明了主要的物理与生态控制锈赤扁谷盗的技术途径,并强调了磷化氢有效熏蒸杀虫技术的应用要点.%Cryptolestes ferrugineus (Stephens) can be found in current grain storage seriously some time and is difficulty to be control,especially by phosphine fumigation.It is important to take scientific strategy and insect population mangemaent actually for ecological grain storage.According to the insect occurring be-havior and control difficulty,some management strategy for Cryptolestes ferrugineus control were discussed.Some ecological and physical measurement and approaches for the insect control were described in outline.Further more the technical and key points of success phosphine fumigation were also mentioned emphatically.

  4. Management of malignant biliary obstruction: Technical and clinical results using an expanded polytetrafluoroethylene fluorinated ethylene propylene (ePTFE/FEP)-covered metallic stent after 6-year experience

    Energy Technology Data Exchange (ETDEWEB)

    Fanelli, Fabrizio; Orgera, Gianluigi; Bezzi, Mario; Rossi, Plinio; Allegritti, Massimiliano; Passariello, Roberto [University of Rome, Department of Radiological Sciences, Rome (Italy)

    2008-05-15

    To evaluate the efficacy and safety of an expanded polytetrafluoroethylene-fluorinated ethylene-propylene (ePTFE/FEP)-covered metallic stent in the management of malignant biliary obstruction. Eighty consecutive patients with malignant common bile duct strictures were treated by placement of 83 covered metallic stents. The stent-graft consists of an inner ePTFE/FEP lining and an outer supporting structure of nitinol wire. Clinical evaluation, assessment of serum bilirubin and liver enzyme levels were analyzed before biliary drainage, before stent-graft placement and during the follow-up period at 1, 3, 6, 9 and 12 months. Technical success was obtained in all cases. After a mean follow-up of 6.9{+-}4.63 months, the 30-day mortality rate was 14.2%. Survival rates were 40% and 20.2% at 6 and 12 months, respectively. Stent-graft patency rates were 95.5%, 92.6% and 85.7% at 3, 6 and 12 months, respectively. Complications occurred in five patients (6.4%); among these, acute cholecystitis was observed in three patients (3.8%). A stent-graft occlusion rate of 9% was observed. The percentage of patients undergoing lifetime palliation (91%) and the midterm patency rate suggest that placement of this ePTFE/FEP-covered stent-graft is safe and highly effective in achieving biliary drainage in patients with malignant strictures of the common bile duct. (orig.)

  5. The FAO/NACA Asia Regional Technical Guidelines on Health Management for the Responsible Movement of Live Aquatic Animals: lessons learned from their development and implementation.

    Science.gov (United States)

    Subasinghe, R P; Bondad-Reantaso, M G

    2008-04-01

    Aquaculture is the fastest growing food producing sector in the world and it is expected to produce significant quantities of fish in the coming years to meet the growing global demand for aquatic animal products. The expansion and diversification of the sector, along with globalisation and trade liberalisation have resulted in aquatic animals and animal products moving around the world rapidly, causing serious disease outbreaks stemming from incursions of pathogens through unregulated transboundary movements. It has become necessary to develop appropriate guidelines for establishing national regulatory frameworks to improve responsibility in transboundary movement of live aquatic animals. In 2000, the Food and Agriculture Organization of the United Nations (FAO), in collaboration with the Network of Aquaculture Centres in Asia-Pacific (NACA) and in partnership with 21 Asian countries, developed the Asia Regional Technical Guidelines on Health Management for the Responsible Movement of Live Aquatic Animals. The present article outlines the development process of the guidelines, the lessons learned from their implementation at national level and the way forward.

  6. Management Plan for Experimental Reintroduction of Sockeye into Skaha Lake; Proposed Implementation, Monitoring, and Evaluation, 2004 Technical Report.

    Energy Technology Data Exchange (ETDEWEB)

    Wright, Howie; Smith, Howard (Okanagan Nation Alliance, Fisheries Department, Westbank, BC, Canada)

    2004-01-01

    Okanagan River sockeye salmon, which spawn near the town of Oliver, B.C., have their farther upstream migration limited by several water control and diversion dams. Stock numbers have been declining for many years and the Okanagan Native Alliance Fisheries Department (ONAFD) has been the principal advocate of a program to restore their numbers and range by reintroducing them into upstream waters where they may once have occurred in substantial numbers Some investigators have warned that without effective intervention Okanagan sockeye are at considerable risk of extinction. Among a host of threats, the quality of water in the single nursery areas in Osoyoos Lake. is deteriorating and a sanctuary such as that afforded in larger lakes higher in the system could be essential. Because the proposed reintroduction upstream has implications for other fish species, (particularly kokanee, the so-called ''landlocked sockeye'' which reside in many Okanagan lakes), the proponents undertook a three-year investigation, with funding from the Bonneville Power Administration and the Confederated Tribes of the Colville Reservation, to identify possible problem areas, and they committed to an interim experimental reintroduction to Skaha Lake where any problems could be worked out before a more ambitious reintroduction, (e.g. to Okanagan Lake) could be formally considered. The three-year investigation was completed in the spring of 2003. It included an assessment of risks from disease or the possible introduction of unwanted exotic species. It also considered the present quality and quantity of sockeye habitat, and opportunities for expanding or improving it. Finally ecological complexity encouraged the development of a life history model to examine interactions of sockeye with other fishes and their food organisms. While some problem areas were exposed in the course of these studies, they appeared to be manageable and the concept of an experimental reintroduction

  7. Independent technical review, handbook

    Energy Technology Data Exchange (ETDEWEB)

    1994-02-01

    Purpose Provide an independent engineering review of the major projects being funded by the Department of Energy, Office of Environmental Restoration and Waste Management. The independent engineering review will address questions of whether the engineering practice is sufficiently developed to a point where a major project can be executed without significant technical problems. The independent review will focus on questions related to: (1) Adequacy of development of the technical base of understanding; (2) Status of development and availability of technology among the various alternatives; (3) Status and availability of the industrial infrastructure to support project design, equipment fabrication, facility construction, and process and program/project operation; (4) Adequacy of the design effort to provide a sound foundation to support execution of project; (5) Ability of the organization to fully integrate the system, and direct, manage, and control the execution of a complex major project.

  8. 从化学物质管理到产品管理的最新技术体系%From Chemical Substance Management to Product Management Technical System

    Institute of Scientific and Technical Information of China (English)

    于丽娜; 霍立彬; 叶旌; 聂晶磊

    2014-01-01

    介绍化学品从传统的物质管理到产品管理的体系现状,从物质使用环节入手,减少有害化学物质的倒逼化学品环境管理模式,以至实现有毒有害化学物质的全过程管控。发达国家通过实施政策法规和环境标签非强制手段,提供化学物质管控的技术、建立替代评估模型,在引导公众自愿前提下倡导企业在更广泛的产品和化学物质领域开展信息收集和公开制度。借鉴国外产品中化学品管理的丰富经验,在法律规定下由少到多分别列明管控的物质清单和产品清单,以替代评估为技术支持,引导公众自愿推进管理,为我国化学品管理决策提供有力支持。%The article describes chemicals management situation,from substance management to product management, which is forced to start from the use sector,the reversed model of chemicals environmental management to realize the whole process of toxic and hazardous chemicals management. Developed countries implement non-coercive means such as appro-priate policies and regulations and environmental labeling;provide technology to control chemical substances and build al-ternative assessment models;in premise of guiding public voluntary,advocate companies in the wider products and chemi-cal substances in the field information collection and disclosure system. Learning from foreign experience of chemicals man-agement,listing controlled material inventory and products inventory separately from least to greatest under the regulation of law,taking alternative assessment as technical support,and guiding the public to promote management voluntarily,can provide strong support to the chemical product management of our country.

  9. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball

    2010-01-01

    Operational Experience Since the closure of the detector in February, the technical operation of CMS has been quite smooth and reliable. Some minor interventions in UXC were required to cure failures of power supplies, fans, readout boards and rack cooling connections, but all these failures were repaired in scheduled technical stops or parasitically during access dedicated to fixing LHC technical problems. The only occasion when CMS had to request an access between fills was to search for the source of an alarm from the leak-detection cables mounted in the DT racks. After a few minutes of diagnostic search, a leaking air-purge was found. Replacement was complete within 2 hours. This incident demonstrated once more the value of these leak detection cables; the system will be further extended (during the end of year technical stop) to cover more racks in UXC and the floor beneath the detector. The magnet has also been operating reliably and reacted correctly to the 14s power cut on 29 May (see below). In or...

  10. Technical Training: Technical Training Seminar

    CERN Multimedia

    2004-01-01

    TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch Monday 9 February 2004 From 10:00 to 12:00 - IT Auditorium - bldg. 31, 3rd floor ANSOFT High-Frequency Seminar David Prestaux, Application Engineer, ANSOFT F-78535 BUC, France This Technical Training seminar will present two Ansoft application products: Ansoft HFSS and Ansoft Designer. Ansoft HFSS makes use of the Finite Element Method (FEM) to calculate field solutions from first principles. It can accurately predict all high-frequency behaviours such as dispersion, mode conversion, and losses due to materials and radiation. Ansoft Designer is a suite of design tools to fully integrate high-frequency, physics-based electromagnetic simulations into a seamless system-level simulation environment. Ansoft Designer uses a simple interface to give complete control over every design task, by a method allowing multiple solvers, Solver on Demand. • Introduction • Overview of the Ansoft Total solution • Ansoft HFSS 9...

  11. Evidence-based case selection: An innovative knowledge management method to cluster public technical and vocational education and training colleges in South Africa

    Directory of Open Access Journals (Sweden)

    Margaretha M. Visser

    2017-01-01

    Full Text Available Background: Case studies are core constructs used in information management research. A persistent challenge for business, information management and social science researchers is how to select a representative sample of cases among a population with diverse characteristics when convenient or purposive sampling is not considered rigorous enough. The context of the study is post-school education, and it involves an investigation of quantitative methods of clustering the population of public technical and vocational education and training (TVET colleges in South Africa into groups with a similar level of maturity in terms of their information systems.Objectives: The aim of the study was to propose an evidence-based quantitative method for the selection of cases for case study research and to demonstrate the use and usefulness thereof by clustering public TVET colleges.Method: The clustering method was based on the use of a representative characteristic of the context, as a proxy. In this context of management information systems (MISs, website maturity was used as a proxy and website maturity model theory was used in the development of an evaluation questionnaire. The questionnaire was used for capturing data on website characteristics, which was used to determine website maturity. The websites of the 50 public TVET colleges were evaluated by nine evaluators. Multiple statistical techniques were applied to establish inter-rater reliability and to produce clusters of colleges.Results: The analyses revealed three clusters of public TVET colleges based on their website maturity levels. The first cluster includes three colleges with no websites or websites at a low maturity level. The second cluster consists of 30 colleges with websites at an average maturity level. The third cluster contains 17 colleges with websites at a high maturity level.Conclusion: The main contribution to the knowledge domain is an innovative quantitative method employing a

  12. Airborne Radar Approach, FAA/NASA Gulf of Mexico Helicopter Flight Test Program

    Science.gov (United States)

    1980-01-01

    TSE Range Statistics by Range Scale 63 18 Radar System Error - Range 65 19 Comparison of Advertised 1 Percent and Measured RSE 66 20 Two S.D. Radar...Range Flight Technical Error (RFTE) and Radar System Error ( RSE ). Range calls for overhead, 0.25 nm, 0.50 nm, 1.25 nm, and 2.00 nm were made with the...nm. These values represent RTSE and include RSE , RFTE, screen resolution,. and update on scan rate error. Data was acquired which provided an estimate

  13. The identity approach for assessing socio-technical resilience to climate change: example of flood risk management for the Island of Dordrecht

    NARCIS (Netherlands)

    Gersonius, B.; Ashley, R.; Zevenbergen, C.

    2012-01-01

    Recent EU guidance on adaptation calls for the enhancement of socio-technical resilience to climate change. However, socio-technical resilience is relatively poorly defined and this makes it difficult to apply in practice. This paper uses the concept of identity as a vehicle to advance the definitio

  14. NetView technical research

    Science.gov (United States)

    1993-01-01

    This is the Final Technical Report for the NetView Technical Research task. This report is prepared in accordance with Contract Data Requirements List (CDRL) item A002. NetView assistance was provided and details are presented under the following headings: NetView Management Systems (NMS) project tasks; WBAFB IBM 3090; WPAFB AMDAHL; WPAFB IBM 3084; Hill AFB; McClellan AFB AMDAHL; McClellan AFB IBM 3090; and Warner-Robins AFB.

  15. Study on management of medical-technical departments in hospitals by the lean observation%精细化视角下的医院医技科室的管理

    Institute of Scientific and Technical Information of China (English)

    黄培

    2012-01-01

    本文阐述了现代医院医技科室定义及分类,剖析了当前医技科室管理中存在的不精细,最后提出构建精细化医技科室管理体系,包括推行质量全过程管理、提高服务水平、提升技术内涵、严格规范,确保医技科室可持续发展.%This article expounded the definition and classification of medical-technical departments in hospitals by the lean observation, analyzed the question in medical-technical departments management. At last the author proposed the establishment of medical-technical departments management mechanism based on lean, which included carrying out quality management from the whole course, improving the level of service and elevicateing the implication of technology, excuting the standard strictly to ensure the sustainable development.

  16. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: LabVIEW Migration 6 to 7: 14.6.2005 (1 day) IT3T/1 - Read your mail and more with Outlook 2003 : 14.6.2005 (IT Technical Training Tutorial, free of charge) IT3T/2 - Creating, managing and using distribution lists with Simba2 : 16.6.2005 (IT Technical Training Tutorial, free of charge) FrontPage 2003 - niveau 2 : 16 & 17.6.2005 (2 jours) size="2">(1journée) Hands-on Introduction to Python Programming: 28 - 30.6.2005 (3 days) Introduction to ANSYS: 21 - 24.6.2005 (4 days) IT3T/3 - Working remotely with Windows XP: 28.6.2005 (IT Technical Training Tutorial, free of charge) IT3T/4 - Editing Websites with Frontpage 2003: 30.6.2005 (IT Technical Training Tutorial, free of charge) LabVIEW base 1 : 4 - 6.7.2005 (3 jours) LabVIEW Basics 2: AutoCorrect, Find/Replace) : 4.7.2005 (afternoon) WORD 2003 (Shor...

  17. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: LabVIEW Real-Time (F) : 7 - 9.6.2005 (3 jours) LabVIEW Migration 6 to 7: 14.6.2005 (1 day) IT3T/1 - Read your mail and more with Outlook 2003 : 14.6.2005 (IT Technical Training Tutorial, free of charge) IT3T/2 - Creating, managing and using distribution lists with Simba2 : 16.6.2005 (IT Technical Training Tutorial, free of charge) FrontPage 2003 - niveau 2 : 16 & 17.6.2005 (2 jours) Utilisation de fichiers PDF avec ACROBAT 6.0 : 20.6.2005 (1journée) Introduction to ANSYS: 21 - 24.6.2005 (4 days) IT3T/3 - Working remotely with Windows XP : 28.6.2005 (IT Technical Training Tutorial, free of charge) IT3T/4 - Editing Websites with Frontpage 2003 : 30.6.2005 (IT Technical Training Tutorial, free of charge) WORD 2003 (Short Course I) - HowTo... Work with repetitive tasks /AutoText, AutoFormat, AutoC...

  18. Air System Information Management

    Science.gov (United States)

    Filman, Robert E.

    2004-01-01

    I flew to Washington last week, a trip rich in distributed information management. Buying tickets, at the gate, in flight, landing and at the baggage claim, myriad messages about my reservation, the weather, our flight plans, gates, bags and so forth flew among a variety of travel agency, airline and Federal Aviation Administration (FAA) computers and personnel. By and large, each kind of information ran on a particular application, often specialized to own data formats and communications network. I went to Washington to attend an FAA meeting on System-Wide Information Management (SWIM) for the National Airspace System (NAS) (http://www.nasarchitecture.faa.gov/Tutorials/NAS101.cfm). NAS (and its information infrastructure, SWIM) is an attempt to bring greater regularity, efficiency and uniformity to the collection of stovepipe applications now used to manage air traffic. Current systems hold information about flight plans, flight trajectories, weather, air turbulence, current and forecast weather, radar summaries, hazardous condition warnings, airport and airspace capacity constraints, temporary flight restrictions, and so forth. Information moving among these stovepipe systems is usually mediated by people (for example, air traffic controllers) or single-purpose applications. People, whose intelligence is critical for difficult tasks and unusual circumstances, are not as efficient as computers for tasks that can be automated. Better information sharing can lead to higher system capacity, more efficient utilization and safer operations. Better information sharing through greater automation is possible though not necessarily easy.

  19. FAA/NASA International Symposium on Advanced Structural Integrity Methods for Airframe Durability and Damage Tolerance

    Science.gov (United States)

    Harris, Charles E. (Editor)

    1994-01-01

    International technical experts in durability and damage tolerance of metallic airframe structures were assembled to present and discuss recent research findings and the development of advanced design and analysis methods, structural concepts, and advanced materials. The symposium focused on the dissemination of new knowledge and the peer-review of progress on the development of advanced methodologies. Papers were presented on: structural concepts for enhanced durability, damage tolerance, and maintainability; new metallic alloys and processing technology; fatigue crack initiation and small crack effects; fatigue crack growth models; fracture mechanics failure, criteria for ductile materials; structural mechanics methodology for residual strength and life prediction; development of flight load spectra for design and testing; and advanced approaches to resist corrosion and environmentally assisted fatigue.

  20. Combined discrete nebulization and microextraction process for molybdenum determination by flame atomic absorption spectrometry (FAAS); Avaliacao da combinacao da nebulizacao discreta e processos de microextracao aplicados a determinacao de molibdenio por espectrometria de absorcao atomica com chama (FAAS)

    Energy Technology Data Exchange (ETDEWEB)

    Oviedo, Jenny A.; Jesus, Amanda M.D. de; Fialho, Lucimar L.; Pereira-Filho, Edenir R., E-mail: erpf@ufscar.br [Universidade Federal de Sao Carlos (UFSCar), SP (Brazil). Departamento de Quimica

    2014-04-15

    Simple and sensitive procedures for the extraction/preconcentration of molybdenum based on vortex-assisted solidified floating organic drop microextraction (VA-SFODME) and cloud point combined with flame absorption atomic spectrometry (FAAS) and discrete nebulization were developed. The influence of the discrete nebulization on the sensitivity of the molybdenum preconcentration processes was studied. An injection volume of 200 μ resulted in a lower relative standard deviation with both preconcentration procedures. Enrichment factors of 31 and 67 and limits of detection of 25 and 5 μ L{sup -1} were obtained for cloud point and VA-SFODME, respectively. The developed procedures were applied to the determination of Mo in mineral water and multivitamin samples. (author)

  1. Technical Training: Technical Training Seminar

    CERN Multimedia

    2004-01-01

    Tuesday 30 March TECHNICAL TRAINING SEMINAR From 9:00 to 12:00 and from 13:00 to 16:00 hrs - Council Chamber, Salle B, Salle des Pas Perdus National Instruments (NI) on Tour 2004 Claudia Jüngel, Evrem Yarkin, Joel Clerc, Hervé Baour / NATIONAL INSTRUMENTS The special event NI on Tour 2004, run in Germany, Austria and Switzerland, will be at CERN on March 30. Technical seminars and free introductory courses will be offered all day long in the Council Chamber, Salle B, and Salle des Pas Perdus (buildings 61 and 503). Technical conferences: 09:00 - 12:00 Data acquisition systems on PCs. Industrial measurement and control techniques. 13:00 - 16:00 Advanced LabVIEW software and PXI instrumentation. Measuring instruments and system components for teststand automation. Introductory courses: 09:00 - 12:00 DIAdem: Data analysis and presentation 13:00 - 16:00 Data acquisition with LabVIEW Language: English and French Free special seminar. Registration is recommended with National Instruments Swi...

  2. Technical Training: Technical Training Seminar

    CERN Multimedia

    2004-01-01

    Tuesday 30 March TECHNICAL TRAINING SEMINAR From 9:00 to 12:00 and from 13:00 to 16:00 hrs - Council Chamber, Salle B, Salle des Pas Perdus National Instruments (NI) on Tour 2004 Claudia Jüngel, Evrem Yarkin, Joel Clerc, Hervé Baour / NATIONAL INSTRUMENTS The special event NI on Tour 2004, run in Germany, Austria and Switzerland, will be at CERN on March 30. Technical seminars and free introductory courses will be offered all day long in the Council Chamber, Salle B, and Salle des Pas Perdus (buildings 61 and 503). Technical conferences: 09:00 - 12:00 Data acquisition systems on PCs. Industrial measurement and control techniques. 13:00 - 16:00 Advanced LabVIEW software and PXI instrumentation. Measuring instruments and system components for teststand automation. Introductory courses: 09:00 - 12:00 DIAdem: Data analysis and presentation 13:00 - 16:00 Data acquisition with LabVIEW Language: English and French Free special seminar. Registration is recommended with National Instruments Switzerland (please sp...

  3. 中等职业技术学校人事档案管理中存在问题及对策%On Problems and Countermeasures of Personnel File Management in Secondary Vocational and Technical Schools

    Institute of Scientific and Technical Information of China (English)

    邱振嘉

    2015-01-01

    对于中等职业技术学校来说,人事档案管理工作是学校人事管理工作的重要内容。其能够为学校人事管理提供重要的依据和条件,对人事管理有着重要的意义。但是,现阶段中等职业技术学校的人事档案管理存在重视力度不足、制度不完善、人员素养不高以及信息化程度较低等问题。根据以上问题的分析,提出通过转变思想意识、健全人事档案管理机制、提升人员素养以及加快信息化管理等方式进一步地完善中等职业技术学校人事档案管理体制,更好地推动学校人事管理工作,促进学校健康、稳定发展。%For secondary vocational and technical schools, per-sonnel file management is an important content and of great sig-nificance in personnel management, as it can provide important basis and condition for school personnel management. However, the current secondary vocational and technical schools pay less attention to personnel file management, lack perfect systems, high-quality staff and high-level information-based manage-ment. In view of the above problems, this paper proposes several measures to further perfect the personnel file management system of secondary vocational and technical schools, better promote school personnel management work and promote the healthy and stable development of schools. The measures include transform-ing ideas and concepts, improving the personnel file management system, improving the quality of staff and accelerating informa-tion-based management.

  4. 大型民用航空制造企业技术管理体系构建方法研究%Research on the Building Method of Technical Management System for Large Civil Aviation Manufacturing Enterprises

    Institute of Scientific and Technical Information of China (English)

    王长法; 赵雄; 陈冰; 吴恒

    2013-01-01

    In order to build technical management system for large civil aviation manufacturing enterprises,it proposes the construction process and method based on normal basic element of technical management system.This model includes the resource,organization,process and system view model.It analyzes the interaction relationship among the decision-making coordination layer,the executive management layer and assessment monitoring layer,designs the indexes and weights for the technical management system,illustrates the radar map,shows the roles of sustainable development for enterprise technology management innovation mechanism.%为摸索出适合大型航空制造业的技术管理体系,基于一般的技术管理体系基本要素,首先构建了面向大型民用航空制造企业的技术管理体系模型,该模型包含资源、组织、流程和制度视图模型;然后按决策协调层、执行层和评估监督层分析了技术管理体系模型中各个层次的相互作用关系,并为该技术管理体系模型设计了指标和权重,进行了雷达图分析,指出企业技术管理的持续性发展为企业技术管理提供了创新机制与体制.

  5. Bioethics for Technical Experts

    Science.gov (United States)

    Asano, Shigetaka

    Along with rapidly expanding applications of life science and technology, technical experts have been implicated more and more often with ethical, social, and legal problems than before. It should be noted that in this background there are scientific and social uncertainty elements which are inevitable during the progress of life science in addition to the historically-established social unreliability to scientists and engineers. In order to solve these problems, therefore, we should establish the social governance with ‘relief’ and ‘reliance’ which enables for both citizens and engineers to share the awareness of the issues, to design social orders and criterions based on hypothetical sense of values for bioethics, to carry out practical use management of each subject carefully, and to improve the sense of values from hypothetical to universal. Concerning these measures, the technical experts can learn many things from the present performance in the medical field.

  6. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Maxwell, Mike, J., P.E.

    2012-08-30

    The STI product is the Final Technical Report from ReliOn, Inc. for contract award DE-EE0000487: Recovery Act PEM Fuel Cell Systems Providing Emergency Reserve and Backup Power. The program covered the turnkey deployment of 431 ReliOn fuel cell systems at 189 individual sites for AT&T and PG&E with ReliOn functioning as the primary equipment supplier and the project manager. The Final Technical Report provides an executive level summary, a comparison of the actual accomplishments vs. the goals and objectives of the project, as well as a summary of the project activity from the contract award date of August 1, 2009 through the contract expiration date of December 31, 2011. Two photos are included in the body of the report which show hydrogen storage and bulk hydrogen refueling technologies developed as a result of this program.

  7. Speciation determination of chromium(III) and (VI) using preconcentration cloud point extraction with flame atomic absorption spectrometry (FAAS)

    Energy Technology Data Exchange (ETDEWEB)

    Kiran, K. [Department of Environmental Sciences, S.V. University, Tirupati, 517502 A.P. (India); Kumar, K. Suresh; Prasad, B.; Suvardhan, K. [Department of Chemistry, S. V. University, Tirupati, 517502 A.P. (India); Lekkala, Ramesh Babu [Department of Environmental Sciences, S.V. University, Tirupati, 517502 A.P. (India); Janardhanam, K. [Department of Environmental Sciences, S.V. University, Tirupati, 517502 A.P. (India)], E-mail: Kandukurijanardhanam@gmail.com

    2008-02-11

    bis-[2-Hydroxy-1-naphthaldehyde] thiourea was synthesized and preconcentration cloud point extraction (CPE) for speciation determination of chromium(III) and (VI) in various environmental samples with flame atomic absorption spectrometry (FAAS) has been developed. Chromium(III) complexes with bis-[2-hydroxynaphthaldehyde] thiourea is subsequently entrapped in the surfactant micelles. After complexation of chromium(III) with reagent, the analyte was quantitatively extracted to the surfactant-rich phase in the non-ionic surfactant Triton X-100 after centrifugation. The effect of pH, concentration of chelating agent, surfactant, equilibration temperature and time on CPE was studied. The relative standard deviation was 2.13% and the limits of detection were around 0.18 {mu}g L{sup -1}.

  8. RECOVERY ACT: DYNAMIC ENERGY CONSUMPTION MANAGEMENT OF ROUTING TELECOM AND DATA CENTERS THROUGH REAL-TIME OPTIMAL CONTROL (RTOC): Final Scientific/Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Ron Moon

    2011-06-30

    This final scientific report documents the Industrial Technology Program (ITP) Stage 2 Concept Development effort on Data Center Energy Reduction and Management Through Real-Time Optimal Control (RTOC). Society is becoming increasingly dependent on information technology systems, driving exponential growth in demand for data center processing and an insatiable appetite for energy. David Raths noted, 'A 50,000-square-foot data center uses approximately 4 megawatts of power, or the equivalent of 57 barrels of oil a day1.' The problem has become so severe that in some cases, users are giving up raw performance for a better balance between performance and energy efficiency. Historically, power systems for data centers were crudely sized to meet maximum demand. Since many servers operate at 60%-90% of maximum power while only utilizing an average of 5% to 15% of their capability, there are huge inefficiencies in the consumption and delivery of power in these data centers. The goal of the 'Recovery Act: Decreasing Data Center Energy Use through Network and Infrastructure Control' is to develop a state of the art approach for autonomously and intelligently reducing and managing data center power through real-time optimal control. Advances in microelectronics and software are enabling the opportunity to realize significant data center power savings through the implementation of autonomous power management control algorithms. The first step to realizing these savings was addressed in this study through the successful creation of a flexible and scalable mathematical model (equation) for data center behavior and the formulation of an acceptable low technical risk market introduction strategy leveraging commercial hardware and software familiar to the data center market. Follow-on Stage 3 Concept Development efforts include predictive modeling and simulation of algorithm performance, prototype demonstrations with representative data center equipment to

  9. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball and W. Zeuner

    2011-01-01

      Operational experience 2011 CMS is approaching the end of a very successful year of operation. Proton- proton running ended in the late afternoon of 30th October with a stunning 5.73 fb–1 delivered by LHC, of which CMS recorded 5.22 fb–1. During heavy-ion operation, which continues until 7th December, both the accelerator and the CMS detector have also performed very well. Despite the encouraging overall reliability of technical operation, several infrastructure failures which occurred since the last Bulletin are worthy of mention, with one leading for the first time to significant data-loss. On 10th July, a CERN-wide power failure brought down essentially all services including the magnet, due to an MCS setting being left in “manual” after the recent technical stop, but there was no significant damage and the detector was operational before the LHC, despite a slow and tortuous recovery (one of several indications this year that there is room for improve...

  10. TECHNICAL COORDINATION

    CERN Multimedia

    Austin Ball

    Summary of progress since last CMS week. Ten years of construction work have been completed. CMS is closed, in very close to the ideal low luminosity configuration, and performed well in the first tests with LHC beam. Behind this encouraging news is the story of a summer of intense commitment by many teams (from the collaboration and 3 CERN departments) working together, against the clock and despite many minor setbacks, to ensure that the experiment was ready to play a leading role in the excitement of September 10. Following beampipe bakeout and refill with pure neon, a magnificent effort by the ECAL group and the pt 5 technical crew made it possible to install and commission all 4 ECAL endcap Dees before the end of August. In the shadow of this activity, the barrel and forward pixel trackers and part of the beam monitoring were installed within the vac tank. The pt 5 technical teams then succeeded in safely removing the 20t installation tables and their support blocks from beneath the already installed ...

  11. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball and W. Zeuner

    2013-01-01

    For the reporting period, the CMS common systems and infrastructure worked well, without failures that caused significant data losses. One more disconnection of the magnet cold box occurred in the shadow of interruptions in data taking, caused by a series of technical faults. The recognition during 2012 that re-connection can only safely be done at around 2 T implies a minimum magnet recovery time of 12 hours and raises serious concerns about the number of ramping cycles of the magnet these incidents cause. This has triggered studies of how to make the cryo-system of the magnet more robust against failures. The proton-proton run ended just before the end-of-year CERN closure, during which CASTOR was installed on the negative end of CMS and both ZDC calorimeters were installed in TAN absorbers the LHC tunnel, in preparation for the heavy-ion run. The installation of CASTOR was an excellent “engineering test” of procedures for working in an activated environment. Despite some technical pr...

  12. Analysis of technical management key points based on power operation and maintenance%基于电力运行检修的技术管理要点分析

    Institute of Scientific and Technical Information of China (English)

    董正杰

    2016-01-01

    电力运行检修是电力运行管理维护中的一项重要工作,对保障电力系统正常稳定运行具有重要影响.本文主要探讨了电力运行检修管理中存在的主要问题,以及电力运行检修的技术管理要点,旨在提高电力运行检修质量与技术管理水平.%The power operation and maintenance is an important work in the maintenance of power operation management,which has an important influence on the normal and stable operation of power system.This paper mainly discusses the main problems in the operation and maintenance management of electricity,and the technical management of the operation and maintenance of electric power,aiming at improving the quality of power operation and maintenance and technical management level.

  13. Federal Aviation Administration (FAA) Reauthorization: An Overview of Legislative Action in the 111th Congress

    Science.gov (United States)

    2010-03-30

    Operations Quality Assurance (FOQA) program; a Line Operational Safety Audit ( LOSA ) program; and a Flight Crew Fatigue Risk Management program. While...Historically, CVR use has been limited to accident investigations. A separate provision of the bill would generally protect ASAP, FOQA and LOSA data from...oversight committees detailing the utilization of voluntary safety programs, including ASAP, FOQA, LOSA , and airline Advanced Qualification Programs (AQPs

  14. Investigation of technical management documents systems on infection control in other countries and international organizations%国外医院感染管理技术类文件体系现况研究

    Institute of Scientific and Technical Information of China (English)

    姚希; 巩玉秀; 张宇; 陈美恋; 李六亿

    2015-01-01

    OBJECTIVE To investigate the current status and characteristics of the representative technical manage-ment documents systems on infection control of other counties and international organizations so as to provide guidance for establishment of technical document systems in China .METHODS The characteristics of the technical management documents systems on infection control ,issue forms ,and issue agencies of three counties and three international organizations were investigated and cleared up through expert interview and review of literatures from May 2014 to Dec 2014 ,involving the United States ,the UK ,Germany ,International organization of standardiza-tion ,and European Union .RESULTS The first-level technical management documents systems on infection control were the enforcing documents involving laws and regulations in the United State ,the UK ,and Germany .There were two categories of documents under the laws and regulations ,the first category included the guideline docu-ments to standardize the technology of control of nosocomial infection and promote the implementation of meas-ures ,and the second category included the documents of nosocomial infection management standards .The interna-tional organizations issued the special categories of documents of nosocomial infection management based on the function and duty of organization .CONCLUSION The technical management documents systems on infection con-trol other counties and international organizations are established based on the characteristics of health systems and conform to the general rules ,which has significant reference value in enriching and sorting out the technical man-agement documents systems on infection control of China .%目的 通过研究有代表性的国际组织和国家医院感染管理技术类文件管理的现状与特点 ,为建立我国技术类文件体系提供重要参考.方法 2014年5 -12月通过专家访谈和文献回顾的方法调查并整

  15. Engineering Technical Review Planning Briefing

    Science.gov (United States)

    Gardner, Terrie

    2012-01-01

    The general topics covered in the engineering technical planning briefing are 1) overviews of NASA, Marshall Space Flight Center (MSFC), and Engineering, 2) the NASA Systems Engineering(SE) Engine and its implementation , 3) the NASA Project Life Cycle, 4) MSFC Technical Management Branch Services in relation to the SE Engine and the Project Life Cycle , 5) Technical Reviews, 6) NASA Human Factor Design Guidance , and 7) the MSFC Human Factors Team. The engineering technical review portion of the presentation is the primary focus of the overall presentation and will address the definition of a design review, execution guidance, the essential stages of a technical review, and the overall review planning life cycle. Examples of a technical review plan content, review approaches, review schedules, and the review process will be provided and discussed. The human factors portion of the presentation will focus on the NASA guidance for human factors. Human factors definition, categories, design guidance, and human factor specialist roles will be addressed. In addition, the NASA Systems Engineering Engine description, definition, and application will be reviewed as background leading into the NASA Project Life Cycle Overview and technical review planning discussion.

  16. Technical presentation

    CERN Multimedia

    FP Department

    2009-01-01

    07 April 2009 Technical presentation by Leuze Electronics: 14.00 – 15.00, Main Building, Room 61-1-017 (Room A) Photoelectric sensors, data identification and transmission systems, image processing systems. We at Leuze Electronics are "the sensor people": we have been specialising in optoelectronic sensors and safety technology for accident prevention for over 40 years. Our dedicated staff are all highly customer oriented. Customers of Leuze Electronics can always rely on one thing – on us! •\tFounded in 1963 •\t740 employees •\t115 MEUR turnover •\t20 subsidiaries •\t3 production facilities in southern Germany Product groups: •\tPhotoelectric sensors •\tIdentification and measurements •\tSafety devices

  17. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball and W. Zeuner

    2010-01-01

    Overview Once again, the bulk of this article reviews the intense activity of a recently completed shutdown, which, although quite unforeseeable until a few weeks before it started, proved by its success that our often advertised capability to conduct major maintenance within a two month period is real. Although safely completed, on-time to remarkable precision, the activity was not without incident, and highlighted our dependence on many experienced, specialist teams and their precise choreography. Even after the yoke was safely closed, magnet re-commissioning and beampipe pumpdown showed new and thought-provoking behaviour. The struggle to maintain adequate technical resources will be a pre-occupation over the coming months, in parallel with the start of truly sustained operation, for which various procedures are still being put in place. Planning for future shutdowns must now become a high priority, with many working groups and task forces already in existence to prepare infrastructure improvements and to...

  18. Technical presentation

    CERN Multimedia

    GS Department

    2010-01-01

    10 March 2010 DYNEOS 10:00 – 12:00 - Main Building, Room B, 61-1-009 Dyneos AG is active in the fields of photonics, laser and high-precision positioning. Our highly qualified engineer team has more than 30 years of experience in electro-optical solutions sales. The engineers are supported by a technical and administrative team. We are focused on the Swiss market and represent six suppliers (Coherent, PI Physik Instrumente, SIOS, Nanonics Imaging, APE, Ekspla) in order to give a qualified sales and service support to our customers. Our products are dedicated to the research field as well as to industry. In addition to standard catalog products, we offer custom designs to fulfill the specific needs of OEM customers or specific applications.

  19. Technical presentation

    CERN Multimedia

    FI Department

    2008-01-01

    RADIOSPARES, the leading catalogue distributor of components (electronic, electrical, automation, etc.) and industrial supplies will be at CERN on Friday 3 October 2008 (Main Building, Room B, from 9.00 a.m. to 3.00 p.m.) to introduce its new 2008/2009 catalogue. This will be the opportunity for us to present our complete range of products in more detail: 400 000 part numbers available on our web site (Radiospares France, RS International, extended range of components from other manufacturers); our new services: quotations, search for products not included in the catalogue, SBP products (Small Batch Production: packaging in quantities adapted to customers’ requirements); partnership with our focus manufacturers; demonstration of the on-line purchasing tool implemented on our web site in conjunction with CERN. RADIOSPARES will be accompanied by representatives of FLUKE and TYCO ELECTRONICS, who will make presentations, demonstrate materials and answer any technical questio...

  20. Evaluation of lubricating oil preparation procedures for the determination of Al, Ba, Mo, Si and V by high-resolution continuum source FAAS.

    Science.gov (United States)

    Amorim Filho, Volnei Resta; Gomes Neto, José Anchieta

    2009-01-01

    Microwave-assisted acid decomposition and oil-in-water emulsification were evaluated as sample pretreatment procedures to determine Al, Ba, Mo, Si and V in lubricating oils by high-resolution continuum source flame atomic absorption spectrometry (HR-CS FAAS). Average recoveries of Al, Ba and V in oil digests (107, 103 and 101%) were close to those obtained for emulsions prepared in kerosene medium (94, 113 and 95%). Average recoveries for Mo were close to 105 and 46% for emulsions and digests, respectively. Improved average recoveries (101%) were obtained for Mo in digests using the analyte addition technique. Silicon was successfully quantified only in digested samples. Limits of quantification for Al, Ba, Mo and V were 1.4, 31.5, 1.5 and 11.4-fold lower than those obtained by line-source FAAS. Enhanced sensitivity, multi-elemental capability, and high sample throughput are among the main advantages of HR-CS FAAS in comparison with the line-source FAAS technique.

  1. A Survey of the Aircraft Maintenance Industry to Solicit Perceptions Regarding the Effectiveness of Recent Graduates of F.A.A. Approved Maintenance Schools.

    Science.gov (United States)

    O'Brian, Benjamin H.

    A study examined the perceptions of employers in the aircraft maintenance industry regarding the effectiveness of recent graduates of Federal Aeronautics Administration (FAA)-approved maintenance schools. Of the 100 employers who were contacted, 68 returned usable surveys. Based on responses, it was concluded that the views of employers in the…

  2. A Survey of the Aircraft Maintenance Industry to Solicit Perceptions Regarding the Effectiveness of Recent Graduates of F.A.A. Approved Maintenance Schools.

    Science.gov (United States)

    O'Brian, Benjamin H.

    A study examined the perceptions of employers in the aircraft maintenance industry regarding the effectiveness of recent graduates of Federal Aeronautics Administration (FAA)-approved maintenance schools. Of the 100 employers who were contacted, 68 returned usable surveys. Based on responses, it was concluded that the views of employers in the…

  3. Determination of Fe Content of Some Food Items by Flame Atomic Absorption Spectroscopy (FAAS): A Guided-Inquiry Learning Experience in Instrumental Analysis Laboratory

    Science.gov (United States)

    Fakayode, Sayo O.; King, Angela G.; Yakubu, Mamudu; Mohammed, Abdul K.; Pollard, David A.

    2012-01-01

    This article presents a guided-inquiry (GI) hands-on determination of Fe in food samples including plantains, spinach, lima beans, oatmeal, Frosted Flakes cereal (generic), tilapia fish, and chicken using flame atomic absorption spectroscopy (FAAS). The utility of the GI experiment, which is part of an instrumental analysis laboratory course,…

  4. Technical Training: Technical Training Seminar

    CERN Multimedia

    2004-01-01

    TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch Tuesday 3 February 2004 From 09:00 to 13:30 - Training Centre Auditorium - bldg. 593, room 11 USB (Universal Serial Bus) CYPRESS Seminar Claudia Colombini, Field Application Engineer CYPRESS ActiveComp Electronic GmbH D-85077 MANCHING, Germany As a pioneer in USB, CYPRESS sets the standard for cost-effective solutions without sacrificing functionality, performance or reliability. Having shipped over 200 million USB devices, Cypress is the undisputed market leader and demonstrates unmatched USB expertise. With the industry's broadest selection of USB solutions, Cypress has the right silicon, software and support for every USB application, from Low-speed to High-Speed and USB On-The-Go (OTG). 9:00 - 10:30 Overview of USB systems. USB CYPRESS product overview. Peripherals: Low Speed, Full Speed, High Speed (1.1 and 2.0). Hub Solutions, Embedded Host Solutions, On-The-Go (OTG) and wireless USB. USB Development Tools (first part) 10:30 -...

  5. 文物保护工程全面质量管理的基础技术工作%The Basic Technical Work for the Total Quality Management of Relic Conservation Project

    Institute of Scientific and Technical Information of China (English)

    黄文铮; 郑力鹏

    2011-01-01

    The important approach for improving the quality of conservation project is to implement the total quality management. To carry out total quality management, good jobs are necessary to be done on quality education, standardization, measurement, information management, quality information,quality responsibility and other aspects of the basic technical work.%推行全面质量管理是提高文物保护工程质量水平的重要途径,开展全面质量管理必须做好质量教育、标准化与计量工作、信息管理与质量情报、质量责任制等几个方面的基础技术工作.

  6. The Software Technical Review Process

    Science.gov (United States)

    1988-06-01

    section differentiates between formal and informal sistent manner in which every developer has their reviews. These terms are ill-defined and must be...cited. SEI-CM-3-1.5 13 The Software Technical Review Process Remus79 Eng. SE-JO, 1 (Jan. 1984), 68-72. Remus, H., and S. Zilles . "Prediction and Manage...34 Fourth International Conference on Software equation in a project management system. There Engineering. Silver Spring, MD: IEEE Computer are several

  7. 76 FR 12300 - Safety Management System for Certificated Airports; Extension of Comment Period

    Science.gov (United States)

    2011-03-07

    ... Federal Aviation Administration 14 CFR Part 139 RIN 2120-AJ38 Safety Management System for Certificated... safety management system (SMS) for its entire airfield environment (including movement and non- movement...: Background On October 7, 2010, the FAA published Notice No. 10-14, entitled ``Safety Management System...

  8. Momentum in Transformation of Technical Infrastructure

    DEFF Research Database (Denmark)

    Nielsen, Susanne Balslev; Elle, Morten

    1999-01-01

    Current infrastructure holds a considerable momentum and this momentum is a barrier of transformation towards more sustainable technologies and more sustainable styles of network management. Using the sewage sector in Denmark as an example of a technical infrastructure system this paper argues...... that there are technical, economical and social aspects of the current infrastructures momentum....

  9. OptiPhy, a technical-economic optimisation model for improving the management of plant protection practices in agriculture: a decision-support tool for controlling the toxicity risks related to pesticides.

    Science.gov (United States)

    Mghirbi, Oussama; LE Grusse, Philippe; Fabre, Jacques; Mandart, Elisabeth; Bord, Jean-Paul

    2017-03-01

    The health, environmental and socio-economic issues related to the massive use of plant protection products are a concern for all the stakeholders involved in the agricultural sector. These stakeholders, including farmers and territorial actors, have expressed a need for decision-support tools for the management of diffuse pollution related to plant protection practices and their impacts. To meet the needs expressed by the public authorities and the territorial actors for such decision-support tools, we have developed a technical-economic model "OptiPhy" for risk mitigation based on indicators of pesticide toxicity risk to applicator health (IRSA) and to the environment (IRTE), under the constraint of suitable economic outcomes. This technical-economic optimisation model is based on linear programming techniques and offers various scenarios to help the different actors in choosing plant protection products, depending on their different levels of constraints and aspirations. The health and environmental risk indicators can be broken down into sub-indicators so that management can be tailored to the context. This model for technical-economic optimisation and management of plant protection practices can analyse scenarios for the reduction of pesticide-related risks by proposing combinations of substitution PPPs, according to criteria of efficiency, economic performance and vulnerability of the natural environment. The results of the scenarios obtained on real ITKs in different cropping systems show that it is possible to reduce the PPP pressure (TFI) and reduce toxicity risks to applicator health (IRSA) and to the environment (IRTE) by up to approximately 50 %.

  10. TECHNICAL COORDINATION

    CERN Multimedia

    Austin Ball

    2013-01-01

      Since the last report, much visible progress has been made, as the LS1 programme approaches the halfway point. From early October, technical and safety shift-crew have been present around the clock, allowing detectors to stay switched on overnight, ensuring that safety systems are operational and instructions for non-expert shift-crew are clear. LS1 progress Throughout the summer, whilst the solenoid vacuum tank and YB0 surfaces were accessible, an extensive installation programme took place to prepare for Tracker colder operation and the PLT installation, in 2014, the Phase 1 Pixel Tracker installation, in 2016–’17, and the HCAL Phase 1 upgrade completion, ending in LS2. This included pipework for N2 or dry air to flush the Tracker bulkhead region, many sensors to monitor temperature and dew point in the Tracker and its service channels, heating wires outside the Tracker cooling bundles, supports for the new vacuum-jacketed, concentric, CO2 Pixel cooling lines, the PLT cool...

  11. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball and W. Zeuner

    2012-01-01

      UXC + detectors As explained in detail in the November 2011 bulletin, the bellows unit at −18.5 m from the CMS interaction point was identified as a prime candidate for the regularly occurring pressure spikes which occasionally led to sustained severe background conditions in 2011, affecting dead time and data quality. Similar regions in LHC with vacuum instabilities were observed to be close to bellows, which radiography showed to have distorted RF-fingers — on removal, they proved to have been severely overheated. The plans for the Year-End Technical Stop were adapted to prioritise radiography of the bellows at 16 m to 18 m either end of CMS. Excellent work by the beam pipe, survey and heavy mechanical teams allowed the X-rays to be taken as planned on 20th December, showing that the bellow at −18.5m had an obvious non-conformity. The RF-fingers were found inside the end of the opposing flared pipe instead of outside. In addition, the overlap between fingers and...

  12. The Application of Strengths, Weaknesses, Opportunities and Threats (SWOT) Analysis for Managing Vocational and Technical Education (VTE) Programmes for Improved Efficiency in Nigeria

    Science.gov (United States)

    Adepoju, T. L.; Famade, Olu Adesola

    2010-01-01

    This paper reviews the current status of vocational and technical education programmes (VTE) in Nigeria and the major innovations of the Nigerian Government in the recent times in the sector vis-a-vis the demands of the modern world for vocational and technological development. It therefore, proposes a paradigm shift in the operation of VTE…

  13. The Application of Strengths, Weaknesses, Opportunities and Threats (SWOT) Analysis for Managing Vocational and Technical Education (VTE) Programmes for Improved Efficiency in Nigeria

    Science.gov (United States)

    Adepoju, T. L.; Famade, Olu Adesola

    2010-01-01

    This paper reviews the current status of vocational and technical education programmes (VTE) in Nigeria and the major innovations of the Nigerian Government in the recent times in the sector vis-a-vis the demands of the modern world for vocational and technological development. It therefore, proposes a paradigm shift in the operation of VTE…

  14. Determination of arsenic in liver and kidney of mice exposed in realgar by HG-FAAS%HG-FAAS 法测定雄黄染毒小鼠肝及肾脏中的砷含量

    Institute of Scientific and Technical Information of China (English)

    苑洁; 霍韬光; 王艳蕾; 郭婧潭; 焦雪鑫; 张颖花; 袁媛; 高岚岳; 姜泓

    2015-01-01

    A novel hydride generation‐flame atomic absorption spectrometry (HG‐FAAS ) method was established for the determination of arsenic in liver and kidney of mice after realgar exposure .The results showed that the method was accurate ,sensitive ,reliable and low detec‐tion limit .The distribution levels of arsenic in liver ,kidney of realgar infected mice were fairly with the liver and kidney content .Meanwhile hydride generation conditions were optimized .%建立了氢化物发生‐火焰原子吸收法(HG‐FAAS)测定雄黄染毒小鼠肝及肾脏中砷含量的方法。结果表明,该方法准确、灵敏、可靠、检出限低。雄黄染毒小鼠肝、肾脏中砷的分布水平相当。同时对氢化物发生条件进行了优化。

  15. 引水灌区水工建筑物的病害及技术处理%Damages to hydrostructures in drawing and irrigation area and technical management

    Institute of Scientific and Technical Information of China (English)

    夏富洲; 刘柏青; 赵世来

    2000-01-01

    For the existent rift, sinking, washing, corrosion and other damages to aqueducts, tunnels, sluice and other hydrostructures,this paper analyzed the generating reasons and put forward technical management measure to solve the problems in theory and practices.%针对引水灌区渡槽、隧洞、倒虹吸及水闸等水工建筑物存在的裂缝、沉陷、冲刷与磨蚀等主要病害从理论和实践方面进行了原因分析,提出了解决问题的技术处理措施。

  16. Expert Systems as Tools for Technical Communicators.

    Science.gov (United States)

    Grider, Daryl A.

    1994-01-01

    Discusses expertise, what an expert system is, what an expert system shell is, what expert systems can and cannot do, knowledge engineering and technical communicators, and planning and managing expert system projects. (SR)

  17. Resting eggs as new biosorbent for preconcentration of trace elements in various samples prior to their determination by FAAS.

    Science.gov (United States)

    Saçmacı, Serife; Yılmaz, Yakup; Kartal, Senol; Kaya, Murat; Duman, Fatih

    2014-06-01

    In this study, the resting eggs of aquatic creatures living in freshwater (Daphnia, Cladocera, Crustacean) ecosystems were used as a novel biosorbent extractant for synchronous preconcentration of trace Cd(II), Co(II), Cu(II), Mn(II), and Ni(II) previous to measurement by flame atomic absorpiton spectrometry (FAAS). Using column procedures, optimization studies were conducted to realize the effective adsorption of the analyte ions such as the solution pH, amount of the biosorbent, volume of the sample, interfering ions, etc. A high preconcentration factor of 67 and low relative standard deflection of ≤4.1% (n=8) were obtained. The invention constrains based on the 3 s/b criterion were 2.4 for Cd(II), 41.4 for Co(II), 4.2 for Cu(II), 3.0 for Mn(II), and 9.6 μg L(-1) for Ni(II). The accuracy of the method was verified by analysis of a certified standard reference material. The used procedure was applied to the definition of the analytes in diverse environmental samples with convincing results. Consequently, the resting eggs of Daphnia can be used as a biosorbent for preconcentration and biosorption studies.

  18. A new synthesis, characterization and application chelating resin for determination of some trace metals in honey samples by FAAS.

    Science.gov (United States)

    Daşbaşı, Teslima; Saçmacı, Şerife; Çankaya, Nevin; Soykan, Cengiz

    2016-07-15

    In this study, we developed a simple and rapid solid phase extraction (SPE) method for the separation/preconcentration and determination of some trace metals by flame atomic absorption spectrometry (FAAS). A new chelating resin, poly [2-(4-methoxyphenylamino)-2-oxoethyl methacrylate-co-divinylbenzene-co-2-acrylamido-2-methyl-1-propanesulfonic acid] (MPAEMA-co-DVB-co-AMPS), was synthesized and characterized. This chelating resin was used as a new adsorbent material for determination of Cd(II), Co(II), Cr(III), Cu(II), Fe(III), Mn(II), Pb(II), and Zn(II) ions. The parameters influential on the determination of this trace metals were examined. Under the optimum conditions, the detection limits (DL) of the method for trace metals were found to be (3s) in the range of 0.9-2.2 μg L(-1) (n=21), the preconcentration factor was calculated as 200 and the relative standard deviation was obtained achieved as ⩽2% for n=11. The method was performed for the determination of trace metals in some honey samples and standard reference materials. Copyright © 2016. Published by Elsevier Ltd.

  19. NASA/FAA/NCAR Supercooled Large Droplet Icing Flight Research: Summary of Winter 1996-1997 Flight Operations

    Science.gov (United States)

    Miller, Dean; Ratvasky, Thomas; Bernstein, Ben; McDonough, Frank; Strapp, J. Walter

    1998-01-01

    During the winter of 1996-1997, a flight research program was conducted at the NASA-Lewis Research Center to study the characteristics of Supercooled Large Droplets (SLD) within the Great Lakes region. This flight program was a joint effort between the National Aeronautics and Space Administration (NASA), the National Center for Atmospheric Research (NCAR), and the Federal Aviation Administration (FAA). Based on weather forecasts and real-time in-flight guidance provided by NCAR, the NASA-Lewis Icing Research Aircraft was flown to locations where conditions were believed to be conducive to the formation of Supercooled Large Droplets aloft. Onboard instrumentation was then used to record meteorological, ice accretion, and aero-performance characteristics encountered during the flight. A total of 29 icing research flights were conducted, during which "conventional" small droplet icing, SLD, and mixed phase conditions were encountered aloft. This paper will describe how flight operations were conducted, provide an operational summary of the flights, present selected experimental results from one typical research flight, and conclude with practical "lessons learned" from this first year of operation.

  20. Determination of some trace metals by FAAS after solid-phase extraction with amberlite XAD-1180/TAN chelating resin.

    Science.gov (United States)

    Yilmaz, Vedat; Kartal, Senol

    2012-01-01

    A new chelating resin was synthesized by immobilizing 1-(2-thiazolylazo)-2-naphthol through the -N=N- group on Amberlite XAD-1180. The resin was used for the preconcentration of Cd(II), Co(II), Cu(II), Mn(II), Ni(II), and Pb(II) ions and their determination by flame atomic absorption spectrometry (FAAS). The influences of some analytical parameters, such as the pH, volume of the sample, flow rates of the sample and eluent, matrix components, amount of the resin, and amount and type of the eluent on the recovery, were investigated. Those metals retained on the resin at pH 8.5 were eluted with 25 mL of 2 mol L(-1) HNO(3). The sorption capacity of the resin was determined, except for Pb(II). The recoveries were found to be ≥95%, and the relative standard-deviation values were ≤4.3%. The detection limits were in the range of 0.1 - 3.6 µg L(-1). For the accuracy of the method, the analysis of a certified reference material was performed. This method was applied to environmental water samples.

  1. Eleventh annual U.S. DOE low-level radioactive waste management conference: Executive summary, opening plenary, technical session summaries, and attendees

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1990-01-01

    The conference consisted of ten technical sessions, with three sessions running simultaneously each day. Session topics included: regulatory updates; performance assessment;understanding remedial action efforts; low-level waste strategy and planning (Nuclear Energy); low-level waste strategy and planning (Defense); compliance monitoring; decontamination and decommissioning; waste characterization; waste reduction and minimization; and prototype licensing application workshop. Summaries are presented for each of these sessions.

  2. A Collection of Technical Studies Completed for the Computer-Aided Acquisition and Logistic Support (CALS) Program Fiscal Year 1988. Volume 1. Text, Security and Data Management

    Science.gov (United States)

    1991-03-01

    and specifica- I tions for the digital and printed forms of the technical publica - N~bticati,• tion and required deliverables. The contractor must...into the final composed publica - tion. Tag Verificaton: The use of tags in the preparation of the document are checked for invalid tags or misplaced...document instances may be quite compact. 3.5 DDL DDL 4 was developed in 1986 by Imagen . DDL (Document Description Language) was intended to cover the

  3. 76 FR 18624 - Research, Technical Assistance and Training Programs: Notice of Final Circular

    Science.gov (United States)

    2011-04-04

    ... TRANSPORTATION Federal Transit Administration Research, Technical Assistance and Training Programs: Notice of... Technical Assistance Training Program: Application Instructions and Program Management Guidelines addresses... comprehensive assistance to grantees on guidance on application procedures and project management...

  4. FAA Air Traffic Control Operations Concepts. Volume 6. ARTCC (Air Route Traffic Control Center)/Host En Route Controllers. Change 1

    Science.gov (United States)

    1988-07-29

    8217 and (MinimumVectorAltitude) ’ MVA ’ and Holding Pattern_Airspace and (ProminentObject) *obstruction* O Task Analysis 0-8 DOT/FAA/AP-87-O1 (VOL #6) CHG 1...0 o A 1. 4 .2 . + DETEC T A P IL O T 02 A IRCRA FT PRO 8 , 17M (E .G . .HV POX IA , × XI X X EXCEPTIN BEACON CODE) 0209 .-~-’... VL’ v Al. 4.2. 8

  5. 25 CFR 1200.42 - Who can provide technical assistance?

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false Who can provide technical assistance? 1200.42 Section... INDIAN TRUST FUND MANAGEMENT REFORM ACT Technical Assistance § 1200.42 Who can provide technical assistance? A sample of competent providers includes any of the following entities with the appropriate...

  6. Managing Electronic Serials: Essays Based on the ALCTS Electronic Serials Institutes 1997-1999. ALCTS Papers on Library Technical Services & Collections, No. 9.

    Science.gov (United States)

    Bluh, Pamela M., Ed.

    If managed well, electronic journals (e-journals) can be extremely efficient, saving money and space while improving access and speeding information delivery. With the help of the Internet, e-journals can also make library collections more accessible to both users and staff. Covering the process of managing electronic serials from licensing,…

  7. Further increased production of free fatty acids by overexpressing a predicted transketolase gene of the pentose phosphate pathway in Aspergillus oryzae faaA disruptant.

    Science.gov (United States)

    Tamano, Koichi; Miura, Ai

    2016-09-01

    Free fatty acids are useful as source materials for the production of biodiesel fuel and various chemicals such as pharmaceuticals and dietary supplements. Previously, we attained a 9.2-fold increase in free fatty acid productivity by disrupting a predicted acyl-CoA synthetase gene (faaA, AO090011000642) in Aspergillus oryzae. In this study, we achieved further increase in the productivity by overexpressing a predicted transketolase gene of the pentose phosphate pathway in the faaA disruptant. The A. oryzae genome is predicted to have three transketolase genes and overexpression of AO090023000345, one of the three genes, resulted in phenotypic change and further increase (corresponding to an increased production of 0.38 mmol/g dry cell weight) in free fatty acids at 1.4-fold compared to the faaA disruptant. Additionally, the biomass of hyphae increased at 1.2-fold by the overexpression. As a result, free fatty acid production yield per liter of liquid culture increased at 1.7-fold by the overexpression.

  8. Rapid and simultaneous determination of essential minerals and trace elements in human milk by improved flame atomic absorption spectroscopy (FAAS) with microwave digestion.

    Science.gov (United States)

    Luo, Yang; Zhang, Bo; Chen, Ming; Wang, Jue; Zhang, Xue; Gao, Wei-Yin; Huang, Jun-Fu; Fu, Wei-Ling

    2010-09-08

    A method for the simultaneous and economical determination of many trace elements in human milk is developed. Two multi-element hollow cathode lamps (HCLs) were used instead of single-element HCLs to improve the sample throughput of flame atomic absorption spectroscopy (FAAS). The microwave digestion of milk is optimized prior to detection, and the performance characteristics of the improved analysis method are identified. Clinical samples are detected by both FAAS and inductively coupled plasma-optical emission spectroscopy (ICP-OES) for methodology evaluation. Results reveal that the proposed FAAS with multi-element HCLs could determine six essential minerals and trace elements within 15 min. This method provides a linear analytical range of 0.01-10 mg L(-1). For Ca, Cu, Fe, Mg, Mn, and Zn, the limits of determination are 1.5, 3, 1.8, 2.2, 2.1, and 1.3 microg L(-1), respectively. The mean relative standard deviations (RSDs) of intra- and interassays are lower than 7%. Excellent operational characteristics of rapidity, simplicity, and economy make the proposed method a promising one for the quantification of trace elements in human milk in clinics of underdeveloped areas.

  9. Alertness Management In Flight Operations: A NASA Education and Training Module

    Science.gov (United States)

    Rosekind, Mark R.; Lebacqz, Victor J.; Gander, Philippa H.; Co, Elizabeth L.; Weldon, Keri J.; Smith, Roy M.; Miller, Donna L.; Gregory, Kevin B.; Statler, Irving C. (Technical Monitor)

    1994-01-01

    Since 1980, the NASA Ames Fatigue Countermeasures Program has been conducting research on sleep, circadian rhythms, and fatigue in a variety of flight operations 1. An original goal of the program was to return the scientific and operational knowledge to the aviation industry. To meet this goal, the NASA Ames Fatigue Countermeasures Program has created an Education and Training Module entitled, "Strategies for Alertness Management in Flight Operations." The Module was designed to meet three objectives: 1) explain the current state of knowledge about the physiological mechanisms underlying fatigue, 2) demonstrate how this knowledge can be applied to improve flight crew sleep, performance, and alertness, and 3) offer countermeasure recommendations. The Module is composed of two components: 1) a 60-minute live presentation provided by a knowledgeable individual and 2) a NASA/FAA Technical Memorandum (TM) that contains the presentation materials and appendices with complementary information. The TM is provided to all individuals attending the live presentation. The Module content is divided into three parts: 1) basic information on sleep, sleepiness, circadian rhythms, fatigue, and how flight operations affect these physiological factors, 2) common misconceptions about sleep, sleepiness, and fatigue, and 3) alertness management strategies. The Module is intended for pilots, management personnel, schedulers, flight attendants, and the many other individuals involved in the aviation system.

  10. Technical efficiency analysis on non-wood forest products managed by SLCP households%退耕还林农户经营非木质林产品的技术效率分析

    Institute of Scientific and Technical Information of China (English)

    薛彩霞; 姚顺波; 于金娜; 李桦

    2013-01-01

      为了研究退耕还林农户经营非木质林产品的技术效率,该文利用四川省雅安市235户退耕还林农户经营非木质林产品的投入产出数据,考虑农户经营非木质林产品的技术异质性,以种苗投入强度和劳动力投入强度作为技术类别的条件变量,建立超越对数形式的潜类别随机前沿模型,分析退耕还林农户经营不同类别非木质林产品的技术效率,结果表明,退耕还林农户经营的非木质林产品存在林下养殖与药材类、水果与木本药材类、林下粮菜类、干果类4个技术类别,各技术类别的技术效率从高到低依次为林下养殖与药材类、水果与木本药材类、干果类和林下粮菜类,要素投入产出弹性不同是农户经营非木质林产品分成不同技术类别的主要原因。研究结果可为保持或促进退耕还林工程的成果提供依据。%The Sloping Land Conversion Program (SLCP) was launched by the Chinese government in 1999 with environmental goals of reducing soil erosion and desertification and increasing the country’s forest and grassland cover by retiring steeply sloping and marginal land from agricultural production. The SLCP has converted 8.20 million hectares of cropland to forest, and more than 32 million households participated in SLCP through the end of 2007. According to the article 4 in SLCP Regulation, the ecological service is the first principle of SLCP. Therefore, the non-timber forest products (NTFPs) management is one of the land-use options that SLCP households might choose. Generally, there are two alternatives of NTFPs management, one is the commercial forests management, including fruit trees, nut fruit trees, tea, woody medicine, etc.; the other is understory planting and livestock breeding in the understory, including grains, vegetables, grass, fungus, medicine, chicks, etc. The technical efficiency will be different if SLCP households adopt different

  11. PESTICIDE APPLICATION TECHNICS IMPROVEMENT

    Directory of Open Access Journals (Sweden)

    Đuro Banaj

    2011-06-01

    Full Text Available The academic textbook Pesticide application tehnics improvement is the result of several-year recording theoretical models, numerous practical tests, and data collection relating to technical systems in plant protection and its environment in the narrowest sense. In this first edition, the authors cover the area they have dealt with for many years. The authors aimed to present complete and clear methods how to solve specific problems in the agricultural practice management, plant protection, and direct practice application – ‘‘Know- How'', with as many as possible useful data. References used, along with local ones, are mostly American and from Western Europe. This textbook is intended for those who already use the agricultural technique in plant protection and those who are just acquiring the basics of technical systems proper application in daily practice, regardless the size of the agricultural farm. The authors covered in details and explained some bases of physics logic, analysis, and synthesis of specific laws while using pesticides due to extremely importance in understanding the problem area.

  12. National waste terminal storage program: Office of Nuclear Waste Isolation Technical Program Plan. Volume 1, Technical Overview

    Energy Technology Data Exchange (ETDEWEB)

    1979-02-16

    A Technical Program Plan was developed detailing projected activities toward the development and operation of a geologic waste repository. This volume presents the overall program in summary fashion: objectives, technical scope, technical approach, schedule plan, FY 1979 budget and milestone plan, organization, management processes, and nuclear waste isolation issues. 8 figures, 8 tables. (DLC)

  13. Improvement of copper FAAS determination conditions via preconcentration procedure with the use of salicylaldoxime complex trapped in polymer matrix.

    Science.gov (United States)

    Tobiasz, Anna; Walas, Stanisław; Landowska, Lucyna; Konefał-Góral, Jadwiga

    2012-07-15

    The paper presents application of a new resin dedicated to copper(II) flow-injection on-line preconcentration prior its flame atomic absorption spectrometric (FAAS) determination. The new sorbent, obtained by suspension polymerization technique, was styrene-divinylbenzene copolymer modified with 5-dodecylsalicylaldoxime-copper(II) complex. In flow mode leaching of initially imprinted Cu(II) ions from polymer beads was effective with 1% (v/v) nitric acid, however for elution of ions retained on the sorbent during the loading process sufficient efficiency was obtained for 0.5% (v/v) nitric acid. The most effective copper(II) sorption was observed within sample pH ca. 6.3 at flow rate 7.5mLmin(-1). Furthermore, preconcentration studies of Cu(II) ions realized in the presence of popular foreign ions like Cd(II), Pb(II), Zn(II), Ni(II), Mn(II), Co(II) did not reveal significant interference. The expected effect of Cu(II)-imprinting was confirmed by higher tolerance level for interferents ions concentration for the new sorbent than for the control polymer. It was found that alkaline metals ions and humic acid had the most relevant influence on copper(II) uptake. Accuracy of the evaluated method was assessed for analysis of water samples (tap and mineral water, river water, artesian water) and certified water reference materials compare them to results obtained by inductively plasma mass spectrometry. The satisfactory relative error values obtained with use of standard addition calibration method, confirms the feasibility of this method for Cu(II) determination in water samples. Application of 120s sorption time enabled to obtain 74-fold enrichment factor and limit of detection (3σ) equal to 0.4μgL(-1). Copyright © 2012 Elsevier B.V. All rights reserved.

  14. TECHNICAL TRAINING PROGRAMME

    CERN Multimedia

    Davide Vitè

    2002-01-01

    CLEAN-2002: Working in a Cleanroom A new, free of charge, half-day seminar is offered in the context of Technical Training for the LHC, for personnel working or managing activities in a cleanroom (for example physicists, engineers and technicians working at or visiting the laboratory). CLEAN-2002 is aimed at raising awareness about good working practices in a cleanroom, and at providing practical examples, analysis tools, and documentation. Specific problems put forward beforehand by attendees will also be addressed, if possible. More information and registration is available HERE The next session, in English, will be on 24.4 (afternoon). Other sessions, in French and English, will be offered following demand. Organiser: Davide Vitè / HR-TD / 75141 Davide.Vite@cern.ch

  15. Reader-Centered Technical Writing

    Science.gov (United States)

    Narayanan, M.

    2012-12-01

    Technical writing is an essential part of professional communication and in recent years it has shifted from a genre-based approach. Formerly, technical writing primarily focused on generating templates of documents and sometimes it was creating or reproducing traditional forms with minor modifications and updates. Now, technical writing looks at the situations surrounding the need to write. This involves deep thinking about the goals and objectives of the project on hand. Furthermore, one observes that it is very important for any participatory process to have the full support of management. This support needs to be well understood and believed by employees. Professional writing may be very persuasive in some cases. When presented in the appropriate context, technical writing can persuade a company to improve work conditions ensuring employee safety and timely production. However, one must recognize that lot of professional writing still continues to make use of reports and instruction manuals. Normally, technical and professional writing addresses four aspects. Objective: The need for generating a given professionally written technical document and the goals the document is expected to achieve and accomplish. Clientele: The clientele who will utilize the technical document. This may include the people in the organization. This may also include "unintended readers." Customers: The population that may be affected by the content of the technical document generated. This includes the stakeholders who will be influenced. Environment: The background in which the document is created. Also, the nature of the situation that warranted the generation of the document. Swiss Psychologist Jean Piaget's view of Learning focuses on three aspects. The author likes to extend Jean Piaget's ideas to students, who are asked to prepare and submit Reader-Centered Technical Writing reports and exercises. Assimilation: Writers may benefit specifically, by assimilating a new object into

  16. A case study review of technical and technology issues for transition of a utility load management program to provide system reliability resources in restructured electricity markets

    Energy Technology Data Exchange (ETDEWEB)

    Weller, G.H.

    2001-07-15

    Utility load management programs--including direct load control and interruptible load programs--were employed by utilities in the past as system reliability resources. With electricity industry restructuring, the context for these programs has changed; the market that was once controlled by vertically integrated utilities has become competitive, raising the question: can existing load management programs be modified so that they can effectively participate in competitive energy markets? In the short run, modified and/or improved operation of load management programs may be the most effective form of demand-side response available to the electricity system today. However, in light of recent technological advances in metering, communication, and load control, utility load management programs must be carefully reviewed in order to determine appropriate investments to support this transition. This report investigates the feasibility of and options for modifying an existing utility load management system so that it might provide reliability services (i.e. ancillary services) in the competitive markets that have resulted from electricity industry restructuring. The report is a case study of Southern California Edison's (SCE) load management programs. SCE was chosen because it operates one of the largest load management programs in the country and it operates them within a competitive wholesale electricity market. The report describes a wide range of existing and soon-to-be-available communication, control, and metering technologies that could be used to facilitate the evolution of SCE's load management programs and systems to provision of reliability services. The fundamental finding of this report is that, with modifications, SCE's load management infrastructure could be transitioned to provide critical ancillary services in competitive electricity markets, employing currently or soon-to-be available load control technologies.

  17. Future FAA Telecommunications Plan

    Science.gov (United States)

    1991-08-01

    pathway between the communications and processing functions. 13.2.2 Functional/Physical Interface Requirements The WMSCR interfaces are illustrated in...communication requirements to support full internodal redundancy, and physically diverse communications paths providing circuit redundancy. 13.4.1.1.1...interface as a pathway between itself and users who are attached to (1) the NADIN II directly, (2) through the NADIN PSN/Message Switching Network (MSN) or

  18. Complexity and Safety (FAA)

    Science.gov (United States)

    2016-10-27

    subsystems (~stepper motor) • 30 medium-sized subsystems (~wheel brake) • 10 large-sized subsystems (~ hypothetical SAAB -EII 100) Estimate EPC for each kind...16.5 EPC (medium) = 32 • For the large system, used the example in [Peterson 2015]: hypothetical SAAB -EII 100 aircraft; estimated the EPC based

  19. Genital and reproductive organ complications of Crohn disease: technical considerations as it relates to perianal disease, imaging features, and implications on management.

    Science.gov (United States)

    Kammann, Steven; Menias, Christine; Hara, Amy; Moshiri, Mariam; Siegel, Cary; Safar, Bashar; Brandes, Steven; Shaaban, Akram; Sandrasegaran, Kumar

    2017-06-01

    A relatively large proportion of patients with Crohn disease (CD) develop complications including abscess formation, stricture, and penetrating disease. A subset of patients will have genital and reproductive organ involvement of CD, resulting in significant morbidity. These special circumstances create unique management challenges that must be tailored to the activity, location, and extent of disease. Familiarity with the epidemiology, pathogenesis, imaging features, and treatment strategies for patients with genital CD can aid imaging diagnoses and guide appropriate patient management. The purpose of this study is to illustrate the spectrum of CD in the genital tract and reproductive organs and discuss the complex management strategies in these patients as it relates to imaging. Given the impact on patient outcome and treatment planning, familiarity with the epidemiology, pathogenesis, imaging features, and treatment of patients with genital Crohn disease can aid radiologic diagnoses and guide appropriate patient management.

  20. Harvest Management and Recovery of Snake River Salmon Stocks : Recovery Issues for Threatened and Endangered Snake River Salmon : Technical Report 7 of 11.

    Energy Technology Data Exchange (ETDEWEB)

    Lestelle, Lawrence C.; Gilbertson, Larry G.

    1993-06-01

    Management measures to regulate salmon fishing harvest have grown increasingly complex over the past decade in response to the needs for improved protection for some salmon runs and to alter harvest sharing between fisheries. The development of management plans that adequately address both needs is an immensely complicated task, one that involves a multitude of stocks, each with its own migration patterns and capacity to sustain exploitation. The fishing industry that relies on these fish populations is also highly diverse. The management task is made especially difficult because the stocks are often intermingled on the fishing grounds, creating highly mixed aggregates of stocks and species on which the fisheries operate. This situation is the one confronting harvest managers attempting to protect Snake River salmon. This report provides an overview of some of the factors that will need to be addressed in assessing the potential for using harvest management measures in the recovery of Snake River salmon stocks. The major sections of the report include the following: perspectives on harvest impacts; ocean distribution and in-river adult migration timing; description of management processes and associated fisheries of interest; and altemative harvest strategies.

  1. Technical standard: Management of radioactive waste at the SRS storage/disposal facilities, 643-7G, 643-29G, 709-2G

    Energy Technology Data Exchange (ETDEWEB)

    Cook, J.R.

    1990-06-01

    This Standard applies to the storage or disposal of Low-Level Radioactive Waste and Transuranic Waste at the Savannah River Site (SRS) Radioactive Waste Storage/Disposal Facility 643-7G, and to the storage of Mixed Waste at facilities 643-29G and 709-2G. This Standard applies only to current operations. The objective for prescribing the requirements in this Standard is to provide for storage and disposal of radioactive waste at SRS in a manner that will ensure the safety and health of employees and of the public, and that will protect the environment. The Technical Standards and Operational Safety Requirements are the formal instruments for setting boundaries for administrative control of all processes.

  2. Technical Procedures Management in Gas-Phase Detoxification Laboratory; Procedimientos Tecnicos de Ensayo en el Laboratorio de Destoxificacion en Fase Gas

    Energy Technology Data Exchange (ETDEWEB)

    Cardona Garcia, A. I.; Sanchez Cabrero, B

    2000-07-01

    The natural cycle of Volatile Organic Compounds (VOCs) has been disturbed by the industrial and socioeconomic activities of human beings. This imbalance in the environment has effects the ecosystems and and the human health. Initiatives have been planned to mitigate these adverse effects. In order to minimize the hazardous effects, initiatives have been proposed for the treatment of gaseous emissions. The solar photocatalysis appears as a clear and renewable technology in front of the conventional ones. In CIEMAT this lines is being investigated as the base of a future implementation at a preindustrial scale. Technical procedures are written in this document for testing Gas-Phase detoxification at lab scale in the Renewable Energy Department (DER) CIEMAT-Madrid to eliminate the VOCs by using the solar photocatalysis technology. (Author) 18 refs.

  3. Research and development of methods/utilities and rules for managing cooperation for performance improvement in government offices. Second Technical progress report, September 1, 1992--January 31, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Kurstedt, H.A.

    1993-03-01

    Purpose is to help managers approach their responsibilities proactively, so that they can anticipate problems and take actions to alleviate or eliminate those problems. Continuous performance improvement, the philosophy behind total quality management, requires working cooperatively to do a little better each day. The most effective tools are working through a closed set of 9 methods: setting expectations, charting, defining indicators and standards, collecting and logging data, converting data to information, organizing and presenting information, reviewing status and progress, self-management, and appraising. In addition, there are 8 rules: focus on what you can do, supply physical evidence of progress, pay attention to detail, inspect (don`t expect), review progress routinely and frequently, face ``success/fail`` squarely, communicate crisply, and conduct honest, open appraisals. Scope and plans of the draft research plan (study areas) are described.

  4. 2013 Technical Roundtable

    Science.gov (United States)

    On December 9, 2013, EPA reconvened the study’s Technical Roundtable. Subject-matter experts discussed the outcomes of the 2013 Technical Workshops, stakeholder engagement, and plans for draft assessment report.

  5. Technical Assistance Plan (TAP)

    Science.gov (United States)

    A Technical Assistance Plan (TAP) enables community groups to retain the services of an independent technical advisor and to provide resources for a community group to help inform other community members about site decisions.

  6. Technical training - places available

    CERN Multimedia

    2013-01-01

    If you would like more information on a course, or have any other inquiry/suggestions, please contact Technical.Training@cern.ch. Eva Stern and Elise Romero, Technical Training Administration (Tel: 74924)

  7. Technical training: places available

    CERN Multimedia

    2014-01-01

    If you would like more information on a course, or have any other inquiry/suggestions, please contact Technical.Training@cern.ch. Eva Stern and Marie Lahchimi, Technical Training Administration (Tel: 74924)

  8. Technical training: places available

    CERN Multimedia

    2013-01-01

    If you would like more information on a course, or for any other inquiry/suggestions, please contact Technical.Training@cern.ch. Eva Stern and Elise Romero, Technical Training Administration (Tel: 74924)

  9. Technical training: places available

    CERN Multimedia

    2013-01-01

    If you would like more information on a course, or for any other inquiry/suggestions, please contact Technical.Training@cern.ch. Eva Stern and Elise Romero, Technical Training Administration (Tél : 74924)  

  10. Technical training: places available

    CERN Multimedia

    2014-01-01

    If you would like more information on a course, or have any other inquiry/suggestions, please contact Technical.Training@cern.ch. Eva Stern and Elise Romero, Technical Training Administration (Tel: 74924)

  11. Technical guide management of waste materials with radioactive contents in biological research centers; Guia tecnica de gestion de materiales residuales con contenido radiactivo en centro de investigacion biologica

    Energy Technology Data Exchange (ETDEWEB)

    Macias, M. T.; Pulido, J.; Sastre, G.; Sanchez, A.; Usera, F.

    2013-07-01

    The guide presented offers significant improvements in the management procedures of waste materials with radioactive contents, in addition to unifying modes of action on radioactive facilities for research and teaching. The guide has been developed within the activities of the SEPR in collaboration with ENRESA. (Author)

  12. Research Traffic Management Advisor (rTMA) Up-level Final Report

    Science.gov (United States)

    Capps, Richard A.

    2013-01-01

    The FAA Time Based Flow Management (TBFM) Program provides for operational use and continued development of the Traffic Management Advisor (TMA) technology that NASA demonstrated in 1996. Although NASA's Center-TRACON Automation System (CTAS) software baseline includes advanced versions of TMA, some research activities are better served by a version of TMA that more closely matches the FAA's TBFM software. Beginning in 2009, NASA created Research TMA (rTMA) to enable researchers to work with FAA TBFM software in a research environment. The original rTMA was derived from TBFM v3.10 and later up-leveled to TBFM v3.12. This report documents the most recent up-level effort in which rTMA was re-derived from TBFM v4.00.07.

  13. The Construction of Laboratory Technical Team in Colleges and Universities:Based on Post Management%基于岗位管理的高校实验技术队伍建设

    Institute of Scientific and Technical Information of China (English)

    雷鸿斌

    2016-01-01

    根据岗位管理理论,按岗位制度竞争上岗能实现人员最优配置。通过对高校实验技术人员调查,发现高校实验技术队伍建设中存在着岗位设置依据笼统、缺乏规范的岗位说明书、岗位分类不科学、“一人双职"、岗位聘任流于形式、岗位考核体系不完整等问题。应以岗位管理为契机,通过科学设岗、明确职责、按岗聘用,使人岗、人人在互动中实现最佳配合,充分调动高校实验技术人员的积极性,以提高工作效率。%According to theories on post management,competing for the posts bases on the post system can achieve the optimal configuration. Survey of technical personnel in colleges and universities has shown that there are many problems like the over general basis for post setting in the laboratory technical team construction in colleges and universities,lack of standard job description,unscientific post classification,“one person double duty”,mere formality of employment,incomplete job evaluation system and so on.Therefore,taking post management as an opportunity,suggestions are provided in this essay such as scientific post setting,clarifying responsibilities,employment based on dif-ferent posts.In this way,in the interaction of the staff members and posts,we can realize the best match between the staff members and the posts,as well as cooperation between the staff members,and thus to help the university laboratory technical team play their role and seek the improvement of work efficiency.

  14. Forex markets: technical analysis and algorithmic trading

    OpenAIRE

    Klepić, Igor

    2013-01-01

    Technical analysis is an efficient way for analysing financial markets such as forex where currencies are being traded. Forex market is the biggest market among all of them which is closed only during weekends. Analysis uses past behaviour of the market and with different mathematical methods tries to predict the future movement of the market. With the help of technical analysis forex market allows individuals as well as large financial corporations to efficiently manage their wealth while th...

  15. Forex markets: technical analysis and algorithmic trading

    OpenAIRE

    Klepić, Igor

    2013-01-01

    Technical analysis is an efficient way for analysing financial markets such as forex where currencies are being traded. Forex market is the biggest market among all of them which is closed only during weekends. Analysis uses past behaviour of the market and with different mathematical methods tries to predict the future movement of the market. With the help of technical analysis forex market allows individuals as well as large financial corporations to efficiently manage their wealth while th...

  16. Teaching Technical Writing - Towards Technical Writing

    DEFF Research Database (Denmark)

    Kastberg, Peter

    2000-01-01

    In this paper I will present key aspects of the curriculum for the university degree in technical translation that I have designed for and subsequently implemented at the German Department of the Aarhus School of Business, Denmark. My starting point will be a critical discussion of the norm...... that used to govern what the quality of an LSP text should be as opposed to the standpoint, which I advocate. By way of summing up, I will show how a university curriculum is designed so that - upon graduation - the technical translator could also be methodological quite well suited to take on the challenge...... of technical writing....

  17. 我国桉树经营的技术问题与思考%Technical Problems and Thinking on Eucalypt Plantation Management in China

    Institute of Scientific and Technical Information of China (English)

    陈少雄; 陈小菲

    2013-01-01

    桉树经营过程中出现的问题由来已久,这首先与我国社会经济发展水平较低有关,也与企业的经营理念不科学有关,和桉树本身的特性无关;虽然国内报纸、杂志、会议等多种形式对有关桉树经营问题的解释和分析,但对桉树的批评、误解、流言仍然较多,桉树的发展还处在风口浪尖。本文主要通过分析桉树在现实中所起的作用,尝试给桉树定位,以理清桉树的概念,解释桉树目前经营措施的来源;同时,通过分析桉树经营过程中存在的主要问题,特别是在林地清理和整地方面的问题,思考解决办法,协助人们正确认识桉树和桉树经营措施。%The key issues facing eucalypt plantations in China have been long standing. Firstly they were caused by the low level of socio-economic development. Also, eucalypt plantation management by many commercial growers is not scientifically based; their silvicultural management is not well attuned to characteristics of these species. Although interpretation and analyses of operational problems for eucalypt plantation were published in national newspapers, magazines, or delivered in the conferences and other occasions, criticisms, misunderstandings and rumors of eucalypts are still given undeserved and inappropriate attention in popular media. As a result, the development and management of eucalypt plantations nowadays attracts considerable controversy. This article provided a concise overview of eucalypt plantation management and the role and importance of eucalypt plantations for society. It also explained the importance and impacts of modern eucalypt plantation management practices. Based on analyses of key challenges and problems facing eucalypt plantations, especially in regards to land-clearing and land preparation, we offer constructive suggestions on solutions and insights to help people understand eucalypt plantations and management of this resource.

  18. 76 FR 64083 - Reliability Technical Conference; Notice of Technical Conference

    Science.gov (United States)

    2011-10-17

    ... Energy Regulatory Commission Reliability Technical Conference; Notice of Technical Conference Take notice that the Federal Energy Regulatory Commission will hold a Technical Conference on Tuesday, November 29... addressing risks to reliability that were identified in earlier Commission technical conferences....

  19. Development of a management system for implementing the NEPA process in the Department of Energy. Technical progress report, March 1, 1978--February 28, 1979

    Energy Technology Data Exchange (ETDEWEB)

    Rolan, R.G.

    1979-04-01

    DOE'S numerous difficulties in responding to the National Environmental Policy Act have sometimes resulted in costly program delays. The Assistant Secretary for Environment commissioned this three-year project to develop a comprehensive approach to managing NEPA compliance agency-wide. The first year's effort resulted in the conceptual design described in this report. The approach used in the NEPA Management System (NMS) project included: analysis of DOE's basic functions to achieve its mission and their associated environmental requirements; analysis of existing DOE mechanisms for meeting these environmental requirements; development of potential approaches for improving the Department's response to NEPA. The issues and potential solutions presented are based on review and analysis of scores of DOE management guidance documents and interviews with hundreds of DOE personnel, both at headquarters and in the field. A six-part Conceptual Framework of the NMS was developed to organize the analysis and present its conclusions. Potentially responsive approaches to improve DOE's NEPA response include: early consideration of the environment in departmental policy making and regulations development; early, detailed planning for NEPA document preparation and review; integration of NEPA compliance activities with DOE procurement processes; institution of post-EIS mitigation and monitoring procedures; development of comprehensive guidance for all aspects of NEPA compliance. Conceptual approaches to solving each of these problems are presented as a basis for more detailed work in the second year.

  20. 25 CFR 1200.43 - How can a tribe apply for technical assistance?

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false How can a tribe apply for technical assistance? 1200.43... AMERICAN INDIAN TRUST FUND MANAGEMENT REFORM ACT Technical Assistance § 1200.43 How can a tribe apply for technical assistance? (a) Tribes wishing technical assistance may request it by sending us a letter along...

  1. 75 FR 32982 - Notice of Intent To Request Extension From the Office of Management and Budget of a Currently...

    Science.gov (United States)

    2010-06-10

    ... Federal Aviation Administration Notice of Intent To Request Extension From the Office of Management and... Airmen for the Operation of Light-Sport Aircraft AGENCY: Federal Aviation Administration (FAA), DOT... request ] the Office of Management and Budget (OMB) to approve a current information collection. This...

  2. Green Technical Methods for Treatment of Waste Water Using Microalgae and its Application in the Management of Natural Water Resources –A Review

    Directory of Open Access Journals (Sweden)

    Sapna N. Nandeshwar

    2014-12-01

    Full Text Available Water covers 71% of the Earth's surface, and is vital for all known forms of life.But only 2.5% of the Earth's water is freshwater. Due to industrialization and Urbanization it is becoming more polluted and risk of this polluted water consumption and its sanitation problem is increasing day to day in most of the developing countries, so it has become anessential need for today’s environment to protect water from getting polluted or develop its cost effective remedial method for its protection. Literature survey was done to find out the new, low-cost waste water treatment methods in which we had found that Microalgae has the natural wastewater treatment properties. It has the self cleansing power due to which it abstracts Nitrate 99%, sulphate 84% and Phosphate 73% for its growth and development. During their growth they trap sun light and CO2 from the environment for their photosynthesis. In the mean time of review of literature we had found that waste water treatment using microalgae has number of positive applications over the conventional methods as it is useful in Wastewater treatment, CO2 sequestration, Cost effective, Sanitation and also in the production of renewable sources of energy such as Biodiesel, Biofuel, Glycerol, Methane gas, Hydrogen gas, Biofertilizers etc. The overall review has concluded that this Green technical method for treatment of municipal waste water using microalgae should be applied in all developing and developed countries for wastewater treatment so as to protect the environmental pollution causing due to waste water from industrial and Societies effluents.

  3. Technical framework of general comprehensive information management platform of IOT%通用物联网综合信息管理平台的技术架构

    Institute of Scientific and Technical Information of China (English)

    陈丽; 刘彤

    2013-01-01

      介绍了通用物联网综合信息管理平台的技术架构,对包括感知层的数据采集汇接设备、网络层的多协议中间件和应用层的跨平台管理系统软件进行了深入研究,给出了Siteview6200型C5I iotWare网络数据采集汇接设备、nMedias中间件和iotWare物联网应用软件平台的主要功能和应用特点。%The paper introduces the technical framework of general comprehensive information management platform of IOT, and makes an in-depth study about the data collection tandems equipment of perception layer, multi-protocol middleware of network layer and cross-platform management software system of application layer. The paper describes main functions and application characteristics of the Siteview6200-type C5I iotWare network data collection tandems equipment, nMedias middleware and iotWare IOT application platform.

  4. Adaptive harvest management for the Svalbard population of pink‐footed geese: 2016 progress summary: Technical Report from DCE – Danish Centre for Environment and Energy, No. 86

    Science.gov (United States)

    Johnson, Fred A.; Madsen, Jesper

    2016-01-01

    This document describes progress to date on the development of an adaptive harvest management strategy for maintaining the Svalbard population of pink‐footed geese (Anser brachyrhynchus) near their agreed target level (60,000) by providing for sustainable harvests in Norway and Denmark. This report provides an assessment of the most recent monitoring information (1991-2015) and its implications for the harvest management strategy. By combining varying hypotheses about survival and reproduction, a suite of nine models have been developed that represent a wide range of possibilities concerning the extent to which demographic rates are density dependent or independent. These results suggest that the pink‐footed goose population may have recently experienced a release from density‐dependent mechanisms, corresponding to the period of most rapid growth in population size. Beginning with the 2016 hunting season, harvest quotas will be prescribed on an annual basis rather than every three years because of the potential to better meet population management objectives. Based on updated model weights, the recent observations of population size (74,800), the proportion of the population comprised of one-year-old birds (0.138), and temperature days in Svalbard (20), the optimal harvest quota for the 2016 hunting season is 25,000. The large increase in quota compared to that during first three years of AHM reflects stakeholders’ desire to reduce population size to the goal of 60,000, recognizing that population size remains relatively high and above-average production is expected in 2016 due to a warm spring.

  5. Augmenting the Stability of OB Dump by Using Fly Ash: A Geo Technical Approach to Sustainably Manage OB Dump at Jharia Coal Field, India

    Directory of Open Access Journals (Sweden)

    Anup Kumar Gupta*

    2016-04-01

    Full Text Available This paper is mainly focused over the possible utilization of fly ash along with OB dump to enhance the stability of OB dump and thus provide a sustainable approach for better waste management of both these materials simultaneously. Instability of coal mine overburden (OB dumps is an important problem in most of the coal mines like Jharia coalfields in India. This is mainly occurring due to sliding nature of the rock material, lack of vegetation etc. Numbers of Environmental and health issues are associated with these unstable OB dumps. As it may easily flow with running water can contaminate the nearby water resource as well as carbonaceous content of the dump causes air pollution due to simultaneous combustion. On the other hand management of coal ash that is produced from thermal plants is also an important task. Dumping of fly ash in open may cause number of environmental problems. Various geotechnical and physical parameters such as particle size analysis, specific gravity, density, and friction angle/cohesion test have been performed to check the stability of OB dump and to analyze impacts of fly ash utilization to stabilize the OB dump.

  6. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Eggeman, Tim [ZeaChem Inc., Lakewood, CO (United States); O' Neill, Brian [ZeaChem Inc., Lakewood, CO (United States)

    2016-08-17

    ZeaChem Inc. and US DOE successfully demonstrated the ZeaChem process for producing sugars and ethanol from high-impact biomass feedstocks. The project was executed over a 5-year period under a $31.25 million cooperative agreement (80:20 Federal:ZeaChem cost share). The project was managed by dividing it into three budget periods. Activities during Budget Period 1 were limited to planning, permitting, and other pre-construction planning. Budget Period 2 activities included engineering, procurement, construction, commissioning, start-up and initial operations through the Independent Engineer Test Runs. The scope of construction was limited to the Chem Frac and Hydrogenolysis units, as the Core Facility was already in place. Construction was complete in December 2012, and the first cellulosic ethanol was produced in February 2013. Additional operational test runs were conducted during Budget Period 3 (completed June 2015) using hybrid poplar, corn stover, and wheat straw feedstocks, resulting in the production of cellulosic ethanol and various other biorefinery intermediates. The research adds to the understanding of the Chem Frac and Hydrogenolysis technologies in that the technical performance of each unit was measured, and the resulting data and operational experience can be used as the basis for engineering designs, thus mitigating risks for deployment in future commercial facilities. The Chem Frac unit was initially designed to be operated as two-stage dilute acid hydrolysis, with first stage conditions selected to remove the hemicellulose fraction of the feedstock, and the second stage conditions selected to remove the cellulose fraction. While the Chem Frac unit met or exceeded the design capacity of 10 ton(dry)/day, the technical effectiveness of the Chem Frac unit was below expectations in its initial two-stage dilute acid configuration. The sugars yields were low, the sugars were dilute, and the sugars had poor fermentability caused by excessive inhibitors

  7. TWRS Configuration management program plan

    Energy Technology Data Exchange (ETDEWEB)

    Vann, J.M.

    1996-06-03

    The TWRS Configuration Management Program Plan (CMPP) integrates technical and administrative controls to establish and maintain consistency among requirements, product configuration, and product information for TWRS products during all life cycle phases. This CMPP will be used by TWRS management and configuration management personnel to establish and manage the technical and integrated baselines and controls and status changes to those baselines.

  8. Optimization of a cloud point extraction procedure with response surface methodology for the quantification of dissolved iron in produced water from the petroleum industry using FAAS.

    Science.gov (United States)

    Gondim, Tamyris A; Guedes, Jhonyson A C; Ribeiro, Livia P D; Lopes, Gisele S; Matos, Wladiana O

    2017-01-30

    The characterization of inorganic elements in the produced water (PW) samples is a difficult task because of the complexity of the matrix. This work deals with a study of a methodology for dissolved Fe quantification in PW from oil industry by flame atomic absorption spectrometry (FAAS) after cloud point extraction (CPE). The procedure is based on the CPE using PAN as complexing agent and Triton X-114 as surfactant. The best conditions for Fe extraction parameters were studied using a Box-Behnken design. The proposed method presented a LOQ of 0.010μgmL(-1) and LOD of 0.003μgmL(-1). The precision of the method was evaluated in terms of repeatability, obtaining a coefficient of variation of 2.54%. The accuracy of the method was assessed by recovery experiments of Fe spiked that presented recovery of 103.28%. The method was applied with satisfactory performance to determine Fe by FAAS in PW samples.

  9. Documentation management system for the handling of technical projects (PIA); Dokumentationsmanagement-System fuer Abwicklung von technischen Projekten (P.I.A.)

    Energy Technology Data Exchange (ETDEWEB)

    Mlaker, A.; Schiwy, W.; Stommel, R.; Stumpe, J. [PLE Pipeline Engineering GmbH, Essen (Germany)

    2000-07-01

    The Project Information Assistant (PIA) (an internally developed product) has been implemented at PLE to support projects. This tool has helped to make considerable improvements in projects and quality assurance, at the same time minimising the extent of work involved. PIA is primarily a document management system which is intended for use in projects with automatic document number allocation and document administration, taking into consideration QM requirements. (orig.) [German] Zur Unterstuetzung bei der Abwicklung von Auftraegen wurde bei PLE als Eigenentwicklung ein Projektinformations-Assistent (P.I.A.) eingefuehrt. Mit diesem Hilfsmittel konnten wesentliche Verbesserungen in der Auftragsabwicklung und der Qualitaetssicherung bei gleichzeitiger Minimierung des Aufwandes realisiert werden. P.I.A. ist in der Hauptfunktion ein Dokumentenmanagement-System fuer die Abwicklung von Auftraegen mit automatischer Dokumentennummern-Vergabe und Dokumentenverwaltung unter Beruecksichtigung von QM-Forderungen. (orig.)

  10. Computer-based communication in support of scientific and technical work. [conferences on management information systems used by scientists of NASA programs

    Science.gov (United States)

    Vallee, J.; Wilson, T.

    1976-01-01

    Results are reported of the first experiments for a computer conference management information system at the National Aeronautics and Space Administration. Between August 1975 and March 1976, two NASA projects with geographically separated participants (NASA scientists) used the PLANET computer conferencing system for portions of their work. The first project was a technology assessment of future transportation systems. The second project involved experiments with the Communication Technology Satellite. As part of this project, pre- and postlaunch operations were discussed in a computer conference. These conferences also provided the context for an analysis of the cost of computer conferencing. In particular, six cost components were identified: (1) terminal equipment, (2) communication with a network port, (3) network connection, (4) computer utilization, (5) data storage and (6) administrative overhead.

  11. Technical and management support for the development of Small Wind Systems. Fiscal year 1980 annual report, October 1, 1979-September 30, 1980

    Energy Technology Data Exchange (ETDEWEB)

    1981-08-01

    The status and achievements of a program for the development, testing, and commercialization of wind energy systems rated under 100 kilowatts are described. The organization structure and task definition used to promote the production, marketing, and acceptance of small systems are described, and the Work Breakdown Structure under which the program is organized is detailed. Reports are given which describe the status of contracts funded by the Federal Wind Energy Program and managed by the Rocky Flats Wind Systems Program. These project reports, sequenced according to the Department of Energy Work Breakdown Structure, name the principal investigators involved, and discuss achievements and progress made during Fiscal Year 1980. Of fourty-four projects, seven were completed during the Fiscal Year. The Work Breakdown Structure Index details the organization sequence.

  12. Technical Training Seminar

    CERN Multimedia

    2003-01-01

    Thursday 4 September From 14:00 to 17:00 - Training Centre Auditorium bldg. 593, room 11 The Summit Design VisualElite 4.0 Release Jean Marie St Paul / SUMMIT DESIGN, Europe, Technical Manager Michel Delcroix / SUMMIT DESIGN, Southern Europe, Sales F-95015 CERGY PONTOISE, France Summit Design is an important EDA digital hardware design tool supplier, and the industry leader in the emerging Electronic System Level design domain. Its VisualElite program has been used at CERN for several years. This seminar will include the highlights of the program's latest release. It will be illustrated how Summit Design products can provide a high-level C/C++ and SystemC functional modelling design and verification environment, enabling engineers to analyse system concepts before the implementation stage. The seminar will show how mixed SystemC and HDL simulation can be done, along with solutions for hardware/software development. • HDL new features: Connectivity Table Editor. Xemacs full integration. New NCsim ...

  13. AIMES Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Katz, Daniel S [Univ. of Illinois, Urbana-Champaign, IL (United States). National Center for Supercomputing Applications (NCSA); Jha, Shantenu [Rutgers Univ., New Brunswick, NJ (United States); Weissman, Jon [Univ. of Minnesota, Minneapolis, MN (United States); Turilli, Matteo [Rutgers Univ., New Brunswick, NJ (United States)

    2017-01-31

    This is the final technical report for the AIMES project. Many important advances in science and engineering are due to large-scale distributed computing. Notwithstanding this reliance, we are still learning how to design and deploy large-scale production Distributed Computing Infrastructures (DCI). This is evidenced by missing design principles for DCI, and an absence of generally acceptable and usable distributed computing abstractions. The AIMES project was conceived against this backdrop, following on the heels of a comprehensive survey of scientific distributed applications. AIMES laid the foundations to address the tripartite challenge of dynamic resource management, integrating information, and portable and interoperable distributed applications. Four abstractions were defined and implemented: skeleton, resource bundle, pilot, and execution strategy. The four abstractions were implemented into software modules and then aggregated into the AIMES middleware. This middleware successfully integrates information across the application layer (skeletons) and resource layer (Bundles), derives a suitable execution strategy for the given skeleton and enacts its execution by means of pilots on one or more resources, depending on the application requirements, and resource availabilities and capabilities.

  14. Technical Training Seminar

    CERN Multimedia

    2003-01-01

    Thursday 4 September From 14:00 to 17:00 - Training Centre Auditorium bldg. 593, room 11 The Summit Design VisualElite 4.0 Release Jean Marie St Paul / SUMMIT DESIGN, Europe, Technical Manager Michel Delcroix / SUMMIT DESIGN, Southern Europe, Sales F-95015 CERGY PONTOISE, France Summit Design is an important EDA digital hardware design tool supplier, and the industry leader in the emerging Electronic System Level design domain. Its VisualElite program has been used at CERN for several years. This seminar will include the highlights of the program's latest release. It will be illustrated how Summit Design products can provide a high-level C/C++ and SystemC functional modelling design and verification environment, enabling engineers to analyse system concepts before the implementation stage. The seminar will show how mixed SystemC and HDL simulation can be done, along with solutions for hardware/software development. • HDL new features: Connectivity Table Editor. Xemacs full integration. New NCsi...

  15. Tiltrotor aircraft noise: A summary of the presentations and discussions at the 1991 FAA/Georgia Tech Workshop

    Science.gov (United States)

    Ahuja, K. K.

    1992-01-01

    Georgia Institute of Technology hosted a workshop in Atlanta on 28-29 Mar. 1991 on the noise problems associated with tiltrotors. The workshop had two major objectives: (1) to review the status of research and development in predicting and reducing tiltrotor noise; and (2) to identify key technical and operational issues and methods to address them. The second objective had both near term and far term implications. In the near term, the goal is to arrive at a level of technical credibility that can support decisions to develop urban and inner city markets. The long term goal is to target resources and actions which will lead to tiltrotor noise abatement and effective control. The opening session consisted of an overview and a discussion of the physics of tiltrotor noise mechanisms. A review of the available experiment data followed. A discourse on potential flight operational procedures to minimize noise impacts, and a general presentation of industry and government perspectives concluded the workshop. Subsequent sessions were available for participants to present observations on and experiences with the XV-15 and V-22. Operational experiences included flight tests, wind tunnel tests, and other simulations. Experiences with computational fluid dynamics codes, small-scale model testing, and other related research were shared. A summary of the presentations and discussions are provided.

  16. [Outsourcing. Advantages and disadvantages of these processes with regard to the management from the view of the technical services in a hospital].

    Science.gov (United States)

    Chen, B

    1999-01-01

    Cost effectiveness and improvement of service quality are the main reasons for outsourcing in hospitals. Long term relationships and customer satisfaction confirm the concept of providing complex services from external specialized companies. There is no standard guideline to determine whether outsourcing should be preferred to inhouse service. Outsourcing is not a guarantee for improved service and a lot of promoted advantages could theoretically also be provided by inhouse service departments. But the effectiveness of inhouse services has to be proven in comparison and competition to external providers. The often named disadvantages of outsourcing have to be considered. Nevertheless they are also not only subject to outsourcing and can also be a problem in inhouse organisations. Furthermore a proper controlling is an important tool to eliminate most of the difficulties in outsourcing projects. In the competition between internal and external service providers concepts of service partnerships that integrate internal and external resources will be the successful ones in the long run. The main potential for improvement is the optimization of the whole process of maintenance management, instead of the mere reduction of head count.

  17. Yucca Mountain Climate Technical Support Representative

    Energy Technology Data Exchange (ETDEWEB)

    Sharpe, Saxon E

    2007-10-23

    The primary objective of Project Activity ORD-FY04-012, “Yucca Mountain Climate Technical Support Representative,” was to provide the Office of Civilian Radioactive Waste Management (OCRWM) with expertise on past, present, and future climate scenarios and to support the technical elements of the Yucca Mountain Project (YMP) climate program. The Climate Technical Support Representative was to explain, defend, and interpret the YMP climate program to the various audiences during Site Recommendation and License Application. This technical support representative was to support DOE management in the preparation and review of documents, and to participate in comment response for the Final Environmental Impact Statement, the Site Recommendation Hearings, the NRC Sufficiency Comments, and other forums as designated by DOE management. Because the activity was terminated 12 months early and experience a 27% reduction in budget, it was not possible to complete all components of the tasks as originally envisioned. Activities not completed include the qualification of climate datasets and the production of a qualified technical report. The following final report is an unqualified summary of the activities that were completed given the reduced time and funding.

  18. Hanford Site technical baseline database. Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    Porter, P.E.

    1995-01-27

    This report lists the Hanford specific files (Table 1) that make up the Hanford Site Technical Baseline Database. Table 2 includes the delta files that delineate the differences between this revision and revision 0 of the Hanford Site Technical Baseline Database. This information is being managed and maintained on the Hanford RDD-100 System, which uses the capabilities of RDD-100, a systems engineering software system of Ascent Logic Corporation (ALC). This revision of the Hanford Site Technical Baseline Database uses RDD-100 version 3.0.2.2 (see Table 3). Directories reflect those controlled by the Hanford RDD-100 System Administrator. Table 4 provides information regarding the platform. A cassette tape containing the Hanford Site Technical Baseline Database is available.

  19. EEG feed-in management. Selected questions of law on technical and operational demands at plant operators according to paragraph 6 no. 1 EEG; EEG-Einspeisemanagement. Ausgewaehlte Rechtsfragen zur technischen und betrieblichen Vorgaben an Anlagenbetreiber gemaess paragraph 6 Nr. 1 EEG

    Energy Technology Data Exchange (ETDEWEB)

    Schmelzer, Knut; Beck, Alexander [Jena Univ. (Germany). Inst. fuer Energiewirtschaftsrecht

    2011-06-15

    In absolute numbers, the number of operations of the feed-in management according to the Renewable Energy Law especially in grid areas in northern Germany in recent years significantly increased. Similarly, the attention in terms of technical / operational measurement and control requirements for power generation plants has increased. This also finds resonance in the actual legal questions on the scope of appropriate legal requirements. Under this aspect, the authors of the contribution under consideration report on selected legal issues to technical and operational requirements to system operators in accordance with paragraph 6 no. 1 EEG.

  20. 76 FR 17471 - Air Tour Management Plan Environmental Assessment for Mount Rainier National Park, WA; Public...

    Science.gov (United States)

    2011-03-29

    ... Director's Order 12: Conservation Planning, Environmental Impact Analysis, and Decision-making, and NPS... Planning, Environment and Public Comment System at: http://parkplanning.nps.gov/MORA_ATMP or sent to the...://www.faa.gov/about/office_org/headquarters_offices/arc/programs/air_tour_management_plan/ NPS Planning...

  1. Color-coded digital subtraction angiography in the management of a rare case of middle cerebral artery pure arterial malformation. A technical and case report.

    Science.gov (United States)

    Feliciano, Caleb E; Pamias-Portalatin, Eva; Mendoza-Torres, Jorge; Effio, Euclides; Moran, Yadira; Rodriguez-Mercado, Rafael

    2014-12-01

    The advent of flow dynamics and the recent availability of perfusion analysis software have provided new diagnostic tools and management possibilities for cerebrovascular patients. To this end, we provide an example of the use of color-coded angiography and its application in a rare case of a patient with a pure middle cerebral artery (MCA) malformation. A 42-year-old male chronic smoker was evaluated in the emergency room due to sudden onset of severe headache, nausea, vomiting and left-sided weakness. Head computed tomography revealed a right basal ganglia hemorrhage. Cerebral digital subtraction angiography (DSA) showed a right middle cerebral artery malformation consisting of convoluted and ectatic collateral vessels supplying the distal middle cerebral artery territory-M1 proximally occluded. An associated medial lenticulostriate artery aneurysm was found. Brain single-photon emission computed tomography with and without acetazolamide failed to show problems in vascular reserve that would indicate the need for flow augmentation. Twelve months after discharge, the patient recovered from the left-sided weakness and did not present any similar events. A follow-up DSA and perfusion study using color-coded perfusion analysis showed perforator aneurysm resolution and adequate, albeit delayed perfusion in the involved vascular territory. We propose a combined congenital and acquired mechanism involving M1 occlusion with secondary dysplastic changes in collateral supply to the distal MCA territory. Angiographic and cerebral perfusion work-up was used to exclude the need for flow augmentation. Nevertheless, the natural course of this lesion remains unclear and long-term follow-up is warranted.

  2. 1998 federal technical standards workshop: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-10-01

    The theme for the 1998 workshop was Standards Management -- A World of Change and Opportunities. The workshop`s goal was to further the implementation of the National Technology Transfer and Advancement Act of 1995 (Public Law 104-113) through the sharing of standards management success stories, lessons learned, and emerging initiatives within the Executive Branch of the Federal Government. The target audience for this workshop included agency/department and contractor personnel and representatives of standards developing organizations that either used technical standards in their work for the Federal Government of participated in standards writing/management activities in support of the missions and programs of Federal agencies/departments. As with previous standards workshops sponsored by the DOE, views on the technical subject areas under the workshop theme were solicited from and provided by agency Standards Executives and standards program managers, voluntary standards organizations, and the private sector. This report includes vugraphs of the presentations.

  3. Three National Standardization Technical Committees Authorized By SAC

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    @@ In December, 2004, the Standardization Administration of China (SAC) has approved the establishments of three National Standardization Technical Committees. They are the National Standardization Technical Committees for Environmental Protection Products (SAC/TC275), for Safety Management of Agricultural Transgenic Biology (SAC/TC276) and for Testing of New Varieties of Plant (SAC/TC277).The National Standardization Technical Committee for Environmental Protection Products is responsible for the development and revision of national standards in the following fields:

  4. QUALITY OF WORKLIFE OF EMPLOYEES IN PRIVATE TECHNICAL INSTITUTIONS

    OpenAIRE

    T. S. Nanjundeswaraswamy; D.R. Swamy

    2013-01-01

    A high quality of work life (QWL) is essential for all organizations to continue to attract and retain employee. There is an impressive contribution by technical Institutions to the development of technology and economy of our nation. The study helps the technical institution employees to know the level of perception towards QWL and to enhance the same by the management. The sample consists of 109 employees of a technical institution. The questionnaire was designed based on nine important com...

  5. Technical Communication in Japan

    Institute of Scientific and Technical Information of China (English)

    Hiraku Amemiya

    2010-01-01

    @@ 1.Characteristics of Japanese Technical Communication(TC) The visual orientation of information characterizes Japanese technical communication.Manuals that have won Japan Manual Awards in the past have employed various designs with graphical presentations that evoke the style of popular magazines.

  6. Technical Manual. The ACT®

    Science.gov (United States)

    ACT, Inc., 2014

    2014-01-01

    This manual contains technical information about the ACT® college readiness assessment. The principal purpose of this manual is to document the technical characteristics of the ACT in light of its intended purposes. ACT regularly conducts research as part of the ongoing formative evaluation of its programs. The research is intended to ensure that…

  7. Summer Technical Students 2004

    CERN Multimedia

    Maximilien Brice

    2004-01-01

    About 100 technical and doctoral students arrive each year, undergraduates and post-graduates who are preparing diploma or doctoral theses in applied science and technology. They spend up to two years at the Laboratory, as technical students as part of their formal training for a recognised degree or its equivalent.

  8. Technical Program, 1974,

    Science.gov (United States)

    proposed AGARD Technical Program and Budget for 1974. The report reflects the program that was unanimously approved by the AGARD National Delegates Board...required to support the proposed 1974 AGARD technical program is presented in Section 3. The separate publications summary shown in Section 4 identifies by

  9. Technical Agency in Practice

    DEFF Research Database (Denmark)

    Krummheuer, Antonia Lina

    2015-01-01

    The paper combines the discussion of technical agency and hybrid networks of Actor-Network Theory (ANT) with an ethnomethodological/conversation analytical (EMCA) perspective on situated practices in which participants ascribe agency to technical artefacts. While ANT works with (ethnographic......) description of hybrid networks in which human and non-human actants are granted agency without differentiating different kinds of agency, EMCA focuses on the member's perspectives and the situated construction of technical agency that is made relevant within an ongoing interaction. Based on an EMCA analysis...... of three video recordings of situations in which technical agency is made relevant by the human participants, the paper demonstrates different ways in which agency is granted to technical artefacts. Human participants can treat a technology as communication partner, as an active part (and actant...

  10. Technical Agency in Practice

    DEFF Research Database (Denmark)

    Krummheuer, Antonia Lina

    2015-01-01

    ) description of hybrid networks in which human and non-human actants are granted agency without differentiating different kinds of agency, EMCA focuses on the member's perspectives and the situated construction of technical agency that is made relevant within an ongoing interaction. Based on an EMCA analysis......The paper combines the discussion of technical agency and hybrid networks of Actor-Network Theory (ANT) with an ethnomethodological/conversation analytical (EMCA) perspective on situated practices in which participants ascribe agency to technical artefacts. While ANT works with (ethnographic...... of three video recordings of situations in which technical agency is made relevant by the human participants, the paper demonstrates different ways in which agency is granted to technical artefacts. Human participants can treat a technology as communication partner, as an active part (and actant...

  11. THE DIMENSIONS OF CREATIVITY IN TECHNICAL EDUCATION

    Directory of Open Access Journals (Sweden)

    Małgorzata Franc

    2016-06-01

    Full Text Available Introduction: this paper engages with the change in the approach to technical education and to its research nature, quantity and quality ratio. The technical education is ordinary education and technical education at the same time. The technical education is a set of activities aimed at the skillful use of technology in deliberately organized process of interacting with an individual, causing permanent changes in their personality. Formation of a learner’s technological culture is made by providing knowledge about the products of technology, experiencing technical situations, raising respect for human technical creativity and products of creativity, developing an ability to use the products of technology. Technical education is aimed at the student’s cognitive realm, providing information and building a system of knowledge about the technical reality, developing cognitive skills needed to receive, understand, interpret and verify technical phenomena. Materials and Methods: the research was based on the analysis of students’ theses enrolled at Organization and Management Faculty of Lodz University of Technology. Results: objective quality indicators were defined for the purposes of analysis. The analysis results are not final, but they form the basis for an in-depth understanding of the academic reality. Generic requirements have been developed to polytechnic education. Discussion and Conclusions: polytechnic education is a specific link in the development of culture and civilization that provides value to the formation of personality. Different areas of the human civilization and the objective socio-cultural world are the basis for development. Polytechnic education forms the elite, providing the stable development of the society in accordance with the rules and principles.

  12. Monitoring and Technical Assistance Review System Notebook

    Science.gov (United States)

    Administration for Children & Families, 2008

    2008-01-01

    This notebook provides guidance on the Monitoring and Technical Assistance Review System (MTARS). The manual is intended for use by Administration on Developmental Disabilities (ADD) staff who manage MTARS and by MTARS reviewers who conduct site visit activities. The notebook is also designed to help Councils, Protection and Advocacy Systems, and…

  13. Editing Technical Proposals (The Friendly Editor).

    Science.gov (United States)

    Bush, Don

    1994-01-01

    Makes suggestions for editing technical proposals. Discusses the marketeers, the hierarchy of hype, how to save days, managing story boards, expediting a laborious process, teaching engineers to write, writing incrementally, the art group, and the editing task. Argues that the best proposals come from starting to write early. (SR)

  14. The Maturing Worker in Technical Services.

    Science.gov (United States)

    Flowers, Kay

    1993-01-01

    Discusses the effects of rapid development and deployment of information processing technology and the aging of the workforce on library technical services. Problems that can result are considered, and ergonomic solutions, training, change management, and the avoidance of stereotypes are advocated. (Contains nine references.) (EAM)

  15. Laboratory for Atmospheres 2007 Technical Highlights

    Science.gov (United States)

    Stewart, Richard W.

    2008-01-01

    The 2007 Technical Highlights describes the efforts of all members of the Laboratory for Atmospheres. Their dedication to advancing Earth Science through conducting research, developing and running models, designing instruments, managing projects, running field campaigns, and numerous other activities, is highlighted in this report.

  16. Technical Writing in the Netherlands.

    Science.gov (United States)

    de Vet, Dominique M. W.

    1996-01-01

    Discusses the technical writing profession in the Netherlands. Bases the discussion on two studies--one directed at technical freelancers and another directed at technical writers working within organizations. Gives a profile of technical writers in the Netherlands; an impression of the problems technical writers in organizations deal with;…

  17. Designing socio-technical systems: Structures and processes

    NARCIS (Netherlands)

    Bots, P.W.G.; Van Daalen, C.

    2012-01-01

    The Systems Engineering, Policy Analysis and Management (SEPAM) MSc curriculum taught at Delft University of Technology focuses on the design of socio-technical systems (STS). We teach our students to structure design activities by considering what we call the TIP aspects: Technical systems, Institu

  18. Technical universities beyond marketization: Educating the virtuous engineer

    NARCIS (Netherlands)

    Reijers, Wessel

    2015-01-01

    In this paper, I argue that marketization trends affecting universities in general are strongly present in the management and education of technical universities. Partly, this is due to the historical background of the technical university as such, but marketization can nonetheless negatively affect

  19. Technical universities beyond marketization: Educating the virtuous engineer

    NARCIS (Netherlands)

    Reijers, Wessel Hubert Maria

    2015-01-01

    In this paper, I argue that marketization trends affecting universities in general are strongly present in the management and education of technical universities. Partly, this is due to the historical background of the technical university as such, but marketization can nonetheless negatively affect

  20. Determinação de metais em óleos lubrificantes, provenientes de motores de ônibus urbano, utilizando a FAAS

    Directory of Open Access Journals (Sweden)

    Eva Lúcia Cardoso Silveira

    2010-01-01

    Full Text Available This work proposed a procedure to examine ashes produced in burning lubricating oils used in public transportation, in Teresina PI. Sulphanilic acid was added to the oil samples, which were burned at 550 °C for three hours and 650 °C for two hours. The ash solutions were analyzed by FAAS and there were significant differences in the metal contents of the waste oil produced from normal car service. The quantification limits in μg g-1 were 5.9 (Fe, 4.4 (Pb, 1.7 (Ni, 2.1 (Cu, and 1.2 (Zn. The results showed positive accuracy and precision with recoveries between 88 and 108%, and RSD lower than 10%.